5110 files changed, 128751 insertions, 92291 deletions

diff --git a/CREDITS b/CREDITS
index 1d39a6d0a51..dca6abcead6 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1677,7 +1677,7 @@ W: http://www.codemonkey.org.uk
 D: Assorted VIA x86 support.
 D: 2.5 AGPGART overhaul.
 D: CPUFREQ maintenance.
-D: Fedora kernel maintainence.
+D: Fedora kernel maintenance.
 D: Misc/Other.
 S: 314 Littleton Rd, Westford, MA 01886, USA
 
@@ -3211,7 +3211,7 @@ N: James Simmons
 E: jsimmons@infradead.org
 E: jsimmons@users.sf.net 
 D: Frame buffer device maintainer
-D: input layer developement 
+D: input layer development
 D: tty/console layer
 D: various mipsel devices 
 S: 115 Carmel Avenue 
@@ -3290,7 +3290,7 @@ S: USA
 N: Manfred Spraul
 E: manfred@colorfullife.com
 W: http://www.colorfullife.com/~manfred
-D: Lots of tiny hacks. Larger improvments to SysV IPC msg,
+D: Lots of tiny hacks. Larger improvements to SysV IPC msg,
 D: slab, pipe, select.
 S: 71701 Schwieberdingen
 S: Germany
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index f607367e642..1b777b96049 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -206,8 +206,8 @@ laptops/
 	- directory with laptop related info and laptop driver documentation.
 ldm.txt
 	- a brief description of LDM (Windows Dynamic Disks).
-leds-class.txt
-	- documents LED handling under Linux.
+leds/
+	- directory with info about LED handling under Linux.
 local_ops.txt
 	- semantics and behavior of local atomic operations.
 lockdep-design.txt
@@ -328,8 +328,6 @@ sysrq.txt
 	- info on the magic SysRq key.
 telephony/
 	- directory with info on telephony (e.g. voice over IP) support.
-uml/
-	- directory with information about User Mode Linux.
 unicode.txt
 	- info on the Unicode character/font mapping used in Linux.
 unshare.txt
diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css
index b585ec258a0..2979c40c10e 100644
--- a/Documentation/ABI/testing/sysfs-bus-css
+++ b/Documentation/ABI/testing/sysfs-bus-css
@@ -29,7 +29,7 @@ Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
 		linux-s390@vger.kernel.org
 Description:	Contains the PIM/PAM/POM values, as reported by the
 		channel subsystem when last queried by the common I/O
-		layer (this implies that this attribute is not neccessarily
+		layer (this implies that this attribute is not necessarily
 		in sync with the values current in the channel subsystem).
 		Note: This is an I/O-subchannel specific attribute.
 Users:		s390-tools, HAL
diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
index edff6630c80..3646ec85d51 100644
--- a/Documentation/ABI/testing/sysfs-class-led
+++ b/Documentation/ABI/testing/sysfs-class-led
@@ -33,5 +33,5 @@ Contact:	Richard Purdie <rpurdie@rpsys.net>
 Description:
 		Invert the LED on/off state. This parameter is specific to
 		gpio and backlight triggers. In case of the backlight trigger,
-		it is usefull when driving a LED which is intended to indicate
+		it is useful when driving a LED which is intended to indicate
 		a device in a standby like state.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 7564e88bfa4..e7be75b96e4 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -183,21 +183,21 @@ Description:	Discover and change clock speed of CPUs
 		to learn how to control the knobs.
 
 
-What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
-Date:      August 2008
+What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
+Date:		August 2008
 KernelVersion:	2.6.27
-Contact:	mark.langsdorf@amd.com
-Description:	These files exist in every cpu's cache index directories.
-		There are currently 2 cache_disable_# files in each
-		directory.  Reading from these files on a supported
-		processor will return that cache disable index value
-		for that processor and node.  Writing to one of these
-		files will cause the specificed cache index to be disabled.
-
-		Currently, only AMD Family 10h Processors support cache index
-		disable, and only for their L3 caches.  See the BIOS and
-		Kernel Developer's Guide at
-		http://support.amd.com/us/Embedded_TechDocs/31116-Public-GH-BKDG_3-28_5-28-09.pdf	
-		for formatting information and other details on the
-		cache index disable.
-Users:    joachim.deguara@amd.com
+Contact:	discuss@x86-64.org
+Description:	Disable L3 cache indices
+
+		These files exist in every CPU's cache/index3 directory. Each
+		cache_disable_{0,1} file corresponds to one disable slot which
+		can be used to disable a cache index. Reading from these files
+		on a processor with this functionality will return the currently
+		disabled index for that node. There is one L3 structure per
+		node, or per internal node on MCM machines. Writing a valid
+		index to one of these files will cause the specificed cache
+		index to be disabled.
+
+		All AMD processors with L3 caches provide this functionality.
+		For details, see BKDGs at
+		http://developer.amd.com/documentation/guides/Pages/default.aspx
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
index b4c4f158ab9..3ca3971109b 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -40,7 +40,7 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		March 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
-                press of a button. A profile holds informations like button
+                press of a button. A profile holds information like button
                 mappings, sensitivity, the colors of the 5 leds and light
                 effects.
                 When read, these files return the respective profile. The
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
index 00efced7396..326e05452da 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -33,7 +33,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 77 bytes long.
 		The mouse will reject invalid data.
@@ -47,7 +47,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 77 bytes in size.
 		This file is readonly.
@@ -58,7 +58,7 @@ Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 43 bytes long.
@@ -73,7 +73,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 43 bytes in size.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
index fdfa16f8189..20f937c9d84 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
@@ -52,7 +52,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 23 bytes long.
 		The mouse will reject invalid data.
@@ -66,7 +66,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 23 bytes in size.
 		This file is readonly.
@@ -77,7 +77,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 16 bytes long.
@@ -92,7 +92,7 @@ Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 16 bytes in size.
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
index 5fab71af3c4..3f8de50e4ff 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -39,7 +39,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When written, this file lets one write the respective profile
 		settings back to the mouse. The data has to be 13 bytes long.
@@ -54,7 +54,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_settings holds informations like resolution, sensitivity
+		profile_settings holds information like resolution, sensitivity
 		and light effects.
 		When read, these files return the respective profile settings.
 		The returned data is 13 bytes in size.
@@ -66,7 +66,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When written, this file lets one write the respective profile
 		buttons back to the mouse. The data has to be 19 bytes long.
 		The mouse will reject invalid data.
@@ -80,7 +80,7 @@ Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	The mouse can store 5 profiles which can be switched by the
 		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds informations about button layout.
+		profile_buttons holds information about button layout.
 		When read, these files return the respective profile buttons.
 		The returned data is 19 bytes in size.
 		This file is readonly.
diff --git a/Documentation/ABI/testing/sysfs-firmware-dmi b/Documentation/ABI/testing/sysfs-firmware-dmi
index ba9da9503c2..c78f9ab01e5 100644
--- a/Documentation/ABI/testing/sysfs-firmware-dmi
+++ b/Documentation/ABI/testing/sysfs-firmware-dmi
@@ -14,14 +14,15 @@ Description:
 
 		DMI is structured as a large table of entries, where
 		each entry has a common header indicating the type and
-		length of the entry, as well as 'handle' that is
-		supposed to be unique amongst all entries.
+		length of the entry, as well as a firmware-provided
+		'handle' that is supposed to be unique amongst all
+		entries.
 
 		Some entries are required by the specification, but many
 		others are optional.  In general though, users should
 		never expect to find a specific entry type on their
 		system unless they know for certain what their firmware
-		is doing.  Machine to machine will vary.
+		is doing.  Machine to machine experiences will vary.
 
 		Multiple entries of the same type are allowed.  In order
 		to handle these duplicate entry types, each entry is
@@ -67,25 +68,24 @@ Description:
 			  and the two terminating nul characters.
 		type	: The type of the entry.  This value is the same
 			  as found in the directory name.  It indicates
-			  how the rest of the entry should be
-			  interpreted.
+			  how the rest of the entry should be interpreted.
 		instance: The instance ordinal of the entry for the
 			  given type.  This value is the same as found
 			  in the parent directory name.
-		position: The position of the entry within the entirety
-			  of the entirety.
+		position: The ordinal position (zero-based) of the entry
+			  within the entirety of the DMI entry table.
 
 		=== Entry Specialization ===
 
 		Some entry types may have other information available in
-		sysfs.
+		sysfs.  Not all types are specialized.
 
 		--- Type 15 - System Event Log ---
 
 		This entry allows the firmware to export a log of
 		events the system has taken.  This information is
 		typically backed by nvram, but the implementation
-		details are abstracted by this table.  This entries data
+		details are abstracted by this table.  This entry's data
 		is exported in the directory:
 
 		/sys/firmware/dmi/entries/15-0/system_event_log
diff --git a/Documentation/ABI/testing/sysfs-firmware-gsmi b/Documentation/ABI/testing/sysfs-firmware-gsmi
new file mode 100644
index 00000000000..0faa0aaf4b6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-gsmi
@@ -0,0 +1,58 @@
+What:		/sys/firmware/gsmi
+Date:		March 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		Some servers used internally at Google have firmware
+		that provides callback functionality via explicit SMI
+		triggers.  Some of the callbacks are similar to those
+		provided by the EFI runtime services page, but due to
+		historical reasons this different entry-point has been
+		used.
+
+		The gsmi driver implements the kernel's abstraction for
+		these firmware callbacks.  Currently, this functionality
+		is limited to handling the system event log and getting
+		access to EFI-style variables stored in nvram.
+
+		Layout:
+
+		/sys/firmware/gsmi/vars:
+
+			This directory has the same layout (and
+			underlying implementation as /sys/firmware/efi/vars.
+			See Documentation/ABI/*/sysfs-firmware-efi-vars
+			for more information on how to interact with
+			this structure.
+
+		/sys/firmware/gsmi/append_to_eventlog - write-only:
+
+			This file takes a binary blob and passes it onto
+			the firmware to be timestamped and appended to
+			the system eventlog.  The binary format is
+			interpreted by the firmware and may change from
+			platform to platform.  The only kernel-enforced
+			requirement is that the blob be prefixed with a
+			32bit host-endian type used as part of the
+			firmware call.
+
+		/sys/firmware/gsmi/clear_config - write-only:
+
+			Writing any value to this file will cause the
+			entire firmware configuration to be reset to
+			"factory defaults".  Callers should assume that
+			a reboot is required for the configuration to be
+			cleared.
+
+		/sys/firmware/gsmi/clear_eventlog - write-only:
+
+			This file is used to clear out a portion/the
+			whole of the system event log.  Values written
+			should be values between 1 and 100 inclusive (in
+			ASCII) representing the fraction of the log to
+			clear.  Not all platforms support fractional
+			clearing though, and this writes to this file
+			will error out if the firmware doesn't like your
+			submitted fraction.
+
+			Callers should assume that a reboot is needed
+			for this operation to complete.
diff --git a/Documentation/ABI/testing/sysfs-firmware-log b/Documentation/ABI/testing/sysfs-firmware-log
new file mode 100644
index 00000000000..9b58e7c5365
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-log
@@ -0,0 +1,7 @@
+What:		/sys/firmware/log
+Date:		February 2011
+Contact:	Mike Waychison <mikew@google.com>
+Description:
+		The /sys/firmware/log is a binary file that represents a
+		read-only copy of the firmware's log if one is
+		available.
diff --git a/Documentation/ABI/testing/sysfs-kernel-fscaps b/Documentation/ABI/testing/sysfs-kernel-fscaps
new file mode 100644
index 00000000000..50a3033b5e1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-fscaps
@@ -0,0 +1,8 @@
+What:		/sys/kernel/fscaps
+Date:		February 2011
+KernelVersion:	2.6.38
+Contact:	Ludwig Nussel <ludwig.nussel@suse.de>
+Description
+		Shows whether file system capabilities are honored
+		when executing a binary
+
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index 41ff8ae4dee..cd9d667c3da 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -27,7 +27,7 @@ KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Some models like the W1N have a LED display that can be
-		used to display several informations.
+		used to display several items of information.
 		To control the LED display, use the following :
 		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
 		where T control the 3 letters display, and DDD the 3 digits display.
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 194ca446ac2..b464d12761b 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -158,3 +158,17 @@ Description:
 		successful, will make the kernel abort a subsequent transition
 		to a sleep state if any wakeup events are reported after the
 		write has returned.
+
+What:		/sys/power/reserved_size
+Date:		May 2011
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/reserved_size file allows user space to control
+		the amount of memory reserved for allocations made by device
+		drivers during the "device freeze" stage of hibernation.  It can
+		be written a string representing a non-negative integer that
+		will be used as the amount of memory to reserve for allocations
+		made by device drivers' "freeze" callbacks, in bytes.
+
+		Reading from this file will display the current value, which is
+		set to 1 MB by default.
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 36f63d4a0a0..b638e50cf8f 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -96,10 +96,10 @@ X!Iinclude/linux/kobject.h
 
   <chapter id="devdrivers">
      <title>Device drivers infrastructure</title>
+     <sect1><title>The Basic Device Driver-Model Structures </title>
+!Iinclude/linux/device.h
+     </sect1>
      <sect1><title>Device Drivers Base</title>
-<!--
-X!Iinclude/linux/device.h
--->
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
 !Edrivers/base/class.c
diff --git a/Documentation/DocBook/dvb/dvbproperty.xml b/Documentation/DocBook/dvb/dvbproperty.xml
index 5f57c7ccd4b..97f397e2fb3 100644
--- a/Documentation/DocBook/dvb/dvbproperty.xml
+++ b/Documentation/DocBook/dvb/dvbproperty.xml
@@ -40,7 +40,7 @@
 
 			<para>Central frequency of the channel.</para>
 
-			<para>For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a
+			<para>For ISDB-T the channels are usually transmitted with an offset of 143kHz. E.g. a
 				valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
 				the channel which is 6MHz.</para>
 
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml
index 78d756de590..60c6976fb31 100644
--- a/Documentation/DocBook/dvb/frontend.xml
+++ b/Documentation/DocBook/dvb/frontend.xml
@@ -139,7 +139,7 @@ consistently to the DiSEqC commands as described in the DiSEqC spec.</para>
 <section id="frontend_sec_tone">
 <title>SEC continuous tone</title>
 
-<para>The continous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
+<para>The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
 high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to
 be switched consistently to the DiSEqC commands as described in the DiSEqC
 spec.</para>
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index fb10fd08c05..b3422341d65 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -191,8 +191,8 @@
 	<para>
 	Whenever an interrupt triggers, the lowlevel arch code calls into
 	the generic interrupt code by calling desc->handle_irq().
-	This highlevel IRQ handling function only uses desc->chip primitives
-	referenced by the assigned chip descriptor structure.
+	This highlevel IRQ handling function only uses desc->irq_data.chip
+	primitives referenced by the assigned chip descriptor structure.
 	</para>
     </sect1>
     <sect1 id="Highlevel_Driver_API">
@@ -206,11 +206,11 @@
 	  <listitem><para>enable_irq()</para></listitem>
 	  <listitem><para>disable_irq_nosync() (SMP only)</para></listitem>
 	  <listitem><para>synchronize_irq() (SMP only)</para></listitem>
-	  <listitem><para>set_irq_type()</para></listitem>
-	  <listitem><para>set_irq_wake()</para></listitem>
-	  <listitem><para>set_irq_data()</para></listitem>
-	  <listitem><para>set_irq_chip()</para></listitem>
-	  <listitem><para>set_irq_chip_data()</para></listitem>
+	  <listitem><para>irq_set_irq_type()</para></listitem>
+	  <listitem><para>irq_set_irq_wake()</para></listitem>
+	  <listitem><para>irq_set_handler_data()</para></listitem>
+	  <listitem><para>irq_set_chip()</para></listitem>
+	  <listitem><para>irq_set_chip_data()</para></listitem>
           </itemizedlist>
 	  See the autogenerated function documentation for details.
 	</para>
@@ -225,6 +225,8 @@
 	  <listitem><para>handle_fasteoi_irq</para></listitem>
 	  <listitem><para>handle_simple_irq</para></listitem>
 	  <listitem><para>handle_percpu_irq</para></listitem>
+	  <listitem><para>handle_edge_eoi_irq</para></listitem>
+	  <listitem><para>handle_bad_irq</para></listitem>
 	  </itemizedlist>
 	  The interrupt flow handlers (either predefined or architecture
 	  specific) are assigned to specific interrupts by the architecture
@@ -241,13 +243,13 @@
 		<programlisting>
 default_enable(struct irq_data *data)
 {
-	desc->chip->irq_unmask(data);
+	desc->irq_data.chip->irq_unmask(data);
 }
 
 default_disable(struct irq_data *data)
 {
 	if (!delay_disable(data))
-		desc->chip->irq_mask(data);
+		desc->irq_data.chip->irq_mask(data);
 }
 
 default_ack(struct irq_data *data)
@@ -284,9 +286,9 @@ noop(struct irq_data *data))
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-desc->chip->irq_mask();
-handle_IRQ_event(desc->action);
-desc->chip->irq_unmask();
+desc->irq_data.chip->irq_mask_ack();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_unmask();
 		</programlisting>
 		</para>
 	    </sect3>
@@ -300,8 +302,8 @@ desc->chip->irq_unmask();
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
-desc->chip->irq_eoi();
+handle_irq_event(desc->action);
+desc->irq_data.chip->irq_eoi();
 		</programlisting>
 		</para>
 	    </sect3>
@@ -315,17 +317,17 @@ desc->chip->irq_eoi();
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
 if (desc->status &amp; running) {
-	desc->chip->irq_mask();
+	desc->irq_data.chip->irq_mask_ack();
 	desc->status |= pending | masked;
 	return;
 }
-desc->chip->irq_ack();
+desc->irq_data.chip->irq_ack();
 desc->status |= running;
 do {
 	if (desc->status &amp; masked)
-		desc->chip->irq_unmask();
+		desc->irq_data.chip->irq_unmask();
 	desc->status &amp;= ~pending;
-	handle_IRQ_event(desc->action);
+	handle_irq_event(desc->action);
 } while (status &amp; pending);
 desc->status &amp;= ~running;
 		</programlisting>
@@ -344,7 +346,7 @@ desc->status &amp;= ~running;
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
+handle_irq_event(desc->action);
 		</programlisting>
 		</para>
    	    </sect3>
@@ -362,12 +364,29 @@ handle_IRQ_event(desc->action);
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-handle_IRQ_event(desc->action);
-if (desc->chip->irq_eoi)
-        desc->chip->irq_eoi();
+if (desc->irq_data.chip->irq_ack)
+	desc->irq_data.chip->irq_ack();
+handle_irq_event(desc->action);
+if (desc->irq_data.chip->irq_eoi)
+        desc->irq_data.chip->irq_eoi();
 		</programlisting>
 		</para>
    	    </sect3>
+	    <sect3 id="EOI_Edge_IRQ_flow_handler">
+	 	<title>EOI Edge IRQ flow handler</title>
+		<para>
+		handle_edge_eoi_irq provides an abnomination of the edge
+		handler which is solely used to tame a badly wreckaged
+		irq controller on powerpc/cell.
+		</para>
+   	    </sect3>
+	    <sect3 id="BAD_IRQ_flow_handler">
+	 	<title>Bad IRQ flow handler</title>
+		<para>
+		handle_bad_irq is used for spurious interrupts which
+		have no real handler assigned..
+		</para>
+   	    </sect3>
 	</sect2>
 	<sect2 id="Quirks_and_optimizations">
 	<title>Quirks and optimizations</title>
@@ -410,6 +429,7 @@ if (desc->chip->irq_eoi)
 	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
 	  <listitem><para>irq_mask()</para></listitem>
 	  <listitem><para>irq_unmask()</para></listitem>
+	  <listitem><para>irq_eoi() - Optional, required for eoi flow handlers</para></listitem>
 	  <listitem><para>irq_retrigger() - Optional</para></listitem>
 	  <listitem><para>irq_set_type() - Optional</para></listitem>
 	  <listitem><para>irq_set_wake() - Optional</para></listitem>
@@ -424,32 +444,24 @@ if (desc->chip->irq_eoi)
   <chapter id="doirq">
      <title>__do_IRQ entry point</title>
      <para>
- 	The original implementation __do_IRQ() is an alternative entry
-	point for all types of interrupts.
+	The original implementation __do_IRQ() was an alternative entry
+	point for all types of interrupts. It not longer exists.
      </para>
      <para>
 	This handler turned out to be not suitable for all
 	interrupt hardware and was therefore reimplemented with split
-	functionality for egde/level/simple/percpu interrupts. This is not
+	functionality for edge/level/simple/percpu interrupts. This is not
 	only a functional optimization. It also shortens code paths for
 	interrupts.
       </para>
-      <para>
-	To make use of the split implementation, replace the call to
-	__do_IRQ by a call to desc->handle_irq() and associate
-        the appropriate handler function to desc->handle_irq().
-	In most cases the generic handler implementations should
-	be sufficient.
-     </para>
   </chapter>
 
   <chapter id="locking">
      <title>Locking on SMP</title>
      <para>
 	The locking of chip registers is up to the architecture that
-	defines the chip primitives. There is a chip->lock field that can be used
-	for serialization, but the generic layer does not touch it. The per-irq
-	structure is protected via desc->lock, by the generic layer.
+	defines the chip primitives. The per-irq structure is
+	protected via desc->lock, by the generic layer.
      </para>
   </chapter>
   <chapter id="structs">
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index f66f4df1869..67e7ab41c0a 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1763,7 +1763,7 @@ as it would be on UP.
 There is a furthur optimization possible here: remember our original
 cache code, where there were no reference counts and the caller simply
 held the lock whenever using the object?  This is still possible: if
-you hold the lock, noone can delete the object, so you don't need to
+you hold the lock, no one can delete the object, so you don't need to
 get and put the reference count.
 </para>
 
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 8c5411cfeaf..cdd1bb9aac0 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -1032,7 +1032,7 @@ and other resources, etc.
 	   <listitem>
 	   <para>
 	   This is indicated by ICRC bit in the ERROR register and
-	   means that corruption occurred during data transfer.  Upto
+	   means that corruption occurred during data transfer.  Up to
 	   ATA/ATAPI-7, the standard specifies that this bit is only
 	   applicable to UDMA transfers but ATA/ATAPI-8 draft revision
 	   1f says that the bit may be applicable to multiword DMA and
@@ -1045,10 +1045,10 @@ and other resources, etc.
 	   <term>ABRT error during data transfer or on completion</term>
 	   <listitem>
 	   <para>
-	   Upto ATA/ATAPI-7, the standard specifies that ABRT could be
+	   Up to ATA/ATAPI-7, the standard specifies that ABRT could be
 	   set on ICRC errors and on cases where a device is not able
 	   to complete a command.  Combined with the fact that MWDMA
-	   and PIO transfer errors aren't allowed to use ICRC bit upto
+	   and PIO transfer errors aren't allowed to use ICRC bit up to
 	   ATA/ATAPI-7, it seems to imply that ABRT bit alone could
 	   indicate tranfer errors.
 	   </para>
@@ -1122,7 +1122,7 @@ and other resources, etc.
 	<para>
 	Depending on commands, not all STATUS/ERROR bits are
 	applicable.  These non-applicable bits are marked with
-	&quot;na&quot; in the output descriptions but upto ATA/ATAPI-7
+	&quot;na&quot; in the output descriptions but up to ATA/ATAPI-7
 	no definition of &quot;na&quot; can be found.  However,
 	ATA/ATAPI-8 draft revision 1f describes &quot;N/A&quot; as
 	follows.
@@ -1507,7 +1507,7 @@ and other resources, etc.
 
 	<listitem>
 	<para>
-	CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used)
+	CHS set up with INITIALIZE DEVICE PARAMETERS (seldom used)
 	</para>
 	</listitem>
 
diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
index 5d259c632cd..fea63b45471 100644
--- a/Documentation/DocBook/media-entities.tmpl
+++ b/Documentation/DocBook/media-entities.tmpl
@@ -294,6 +294,7 @@
 <!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
 <!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
 <!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
+<!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml">
 <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
 <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
 <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 620eb3f6a90..6f242d5dee9 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -485,7 +485,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				Reed-Solomon library.
 			</para>
 			<para>
-				The ECC bytes must be placed immidiately after the data
+				The ECC bytes must be placed immediately after the data
 				bytes in order to make the syndrome generator work. This
 				is contrary to the usual layout used by software ECC. The
 				separation of data and out of band area is not longer
@@ -629,7 +629,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				holds the bad block table. Store a pointer to the pattern  
 				in the pattern field. Further the length of the pattern has to be 
 				stored in len and the offset in the spare area must be given
-				in the offs member of the nand_bbt_descr stucture. For mirrored
+				in the offs member of the nand_bbt_descr structure. For mirrored
 				bad block tables different patterns are mandatory.</para></listitem>
 				<listitem><para>Table creation</para>
 				<para>Set the option NAND_BBT_CREATE to enable the table creation
@@ -648,7 +648,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				<listitem><para>Table version control</para>
 				<para>Set the option NAND_BBT_VERSION to enable the table version control.
 				It's highly recommended to enable this for mirrored tables with write
-				support. It makes sure that the risk of loosing the bad block
+				support. It makes sure that the risk of losing the bad block
 				table information is reduced to the loss of the information about the
 				one worn out block which should be marked bad. The version is stored in
 				4 consecutive bytes in the spare area of the device. The position of
@@ -1060,19 +1060,19 @@ data in this page</entry>
 <row>
 <entry>0x3D</entry>
 <entry>ECC byte 21</entry>
-<entry>Error correction code byte 0 of the eigth 256 Bytes of data
+<entry>Error correction code byte 0 of the eighth 256 Bytes of data
 in this page</entry>
 </row>
 <row>
 <entry>0x3E</entry>
 <entry>ECC byte 22</entry>
-<entry>Error correction code byte 1 of the eigth 256 Bytes of data
+<entry>Error correction code byte 1 of the eighth 256 Bytes of data
 in this page</entry>
 </row>
 <row>
 <entry>0x3F</entry>
 <entry>ECC byte 23</entry>
-<entry>Error correction code byte 2 of the eigth 256 Bytes of data
+<entry>Error correction code byte 2 of the eighth 256 Bytes of data
 in this page</entry>
 </row>
 </tbody></tgroup></informaltable>
diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl
index 53f4f8d3b81..346e552fa2c 100644
--- a/Documentation/DocBook/regulator.tmpl
+++ b/Documentation/DocBook/regulator.tmpl
@@ -267,8 +267,8 @@
      <sect1 id="machine-constraint">
        <title>Constraints</title>
        <para>
-	 As well as definining the connections the machine interface
-	 also provides constraints definining the operations that
+	 As well as defining the connections the machine interface
+	 also provides constraints defining the operations that
 	 clients are allowed to perform and the parameters that may be
 	 set.  This is required since generally regulator devices will
 	 offer more flexibility than it is safe to use on a given
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index b4665b9c40b..7c4b514d62b 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -797,7 +797,7 @@ framework to set up sysfs files for this region. Simply leave it alone.
 	perform some initialization. After that, your hardware
 	starts working and will generate an interrupt as soon
 	as it's finished, has some data available, or needs your
-	attention because an error occured.
+	attention because an error occurred.
 	</para>
 	<para>
 	<filename>/dev/uioX</filename> is a read-only file. A
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
index af293606fbe..8d57c1888dc 100644
--- a/Documentation/DocBook/usb.tmpl
+++ b/Documentation/DocBook/usb.tmpl
@@ -690,7 +690,7 @@ usbdev_ioctl (int fd, int ifno, unsigned request, void *param)
 		    </para><para>
 		    This request lets kernel drivers talk to user mode code
 		    through filesystem operations even when they don't create
-		    a charactor or block special device.
+		    a character or block special device.
 		    It's also been used to do things like ask devices what
 		    device special file should be used.
 		    Two pre-defined ioctls are used
diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml
index dbab79c215c..9028721438d 100644
--- a/Documentation/DocBook/v4l/common.xml
+++ b/Documentation/DocBook/v4l/common.xml
@@ -100,7 +100,7 @@ linux-kernel@vger.kernel.org, 2002-11-20. --></para>
 
       <para>By convention system administrators create various
 character device special files with these major and minor numbers in
-the <filename>/dev</filename> directory. The names recomended for the
+the <filename>/dev</filename> directory. The names recommended for the
 different V4L2 device types are listed in <xref linkend="devices" />.
 </para>
 
diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml
index 2fae3e87ce7..a920ee80f64 100644
--- a/Documentation/DocBook/v4l/controls.xml
+++ b/Documentation/DocBook/v4l/controls.xml
@@ -1243,7 +1243,7 @@ values are:</entry>
 	      </row><row><entry spanname="descr">Mutes the audio when
 capturing. This is not done by muting audio hardware, which can still
 produce a slight hiss, but in the encoder itself, guaranteeing a fixed
-and reproducable audio bitstream. 0 = unmuted, 1 = muted.</entry>
+and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry>
 	      </row>
 	      <row><entry></entry></row>
 	      <row id="v4l2-mpeg-video-encoding">
diff --git a/Documentation/DocBook/v4l/dev-subdev.xml b/Documentation/DocBook/v4l/dev-subdev.xml
index 21caff6d159..05c8fefcbcb 100644
--- a/Documentation/DocBook/v4l/dev-subdev.xml
+++ b/Documentation/DocBook/v4l/dev-subdev.xml
@@ -90,7 +90,7 @@
     processing hardware.</para>
 
     <figure id="pipeline-scaling">
-      <title>Image Format Negotation on Pipelines</title>
+      <title>Image Format Negotiation on Pipelines</title>
       <mediaobject>
 	<imageobject>
 	  <imagedata fileref="pipeline.pdf" format="PS" />
diff --git a/Documentation/DocBook/v4l/libv4l.xml b/Documentation/DocBook/v4l/libv4l.xml
index c14fc3db2a8..3cb10ec5192 100644
--- a/Documentation/DocBook/v4l/libv4l.xml
+++ b/Documentation/DocBook/v4l/libv4l.xml
@@ -140,7 +140,7 @@ and is not locked sets the cid to the scaled value.
 			<para>int v4l2_get_control(int fd, int cid) -
 This function returns a value of 0 - 65535, scaled to from the actual range
 of the given v4l control id. when the cid does not exist, could not be
-accessed for some reason, or some error occured 0 is returned.
+accessed for some reason, or some error occurred 0 is returned.
 </para></listitem>
 </itemizedlist>
 		</section>
diff --git a/Documentation/DocBook/v4l/media-ioc-setup-link.xml b/Documentation/DocBook/v4l/media-ioc-setup-link.xml
index 2331e76ded1..cec97af4dab 100644
--- a/Documentation/DocBook/v4l/media-ioc-setup-link.xml
+++ b/Documentation/DocBook/v4l/media-ioc-setup-link.xml
@@ -34,7 +34,7 @@
       <varlistentry>
 	<term><parameter>request</parameter></term>
 	<listitem>
-	  <para>MEDIA_IOC_ENUM_LINKS</para>
+	  <para>MEDIA_IOC_SETUP_LINK</para>
 	</listitem>
       </varlistentry>
       <varlistentry>
diff --git a/Documentation/DocBook/v4l/pixfmt-y12.xml b/Documentation/DocBook/v4l/pixfmt-y12.xml
new file mode 100644
index 00000000000..ff417b858cc
--- /dev/null
+++ b/Documentation/DocBook/v4l/pixfmt-y12.xml
@@ -0,0 +1,79 @@
+<refentry id="V4L2-PIX-FMT-Y12">
+  <refmeta>
+    <refentrytitle>V4L2_PIX_FMT_Y12 ('Y12 ')</refentrytitle>
+    &manvol;
+  </refmeta>
+  <refnamediv>
+    <refname><constant>V4L2_PIX_FMT_Y12</constant></refname>
+    <refpurpose>Grey-scale image</refpurpose>
+  </refnamediv>
+  <refsect1>
+    <title>Description</title>
+
+    <para>This is a grey-scale image with a depth of 12 bits per pixel. Pixels
+are stored in 16-bit words with unused high bits padded with 0. The least
+significant byte is stored at lower memory addresses (little-endian).</para>
+
+    <example>
+      <title><constant>V4L2_PIX_FMT_Y12</constant> 4 &times; 4
+pixel image</title>
+
+      <formalpara>
+	<title>Byte Order.</title>
+	<para>Each cell is one byte.
+	  <informaltable frame="none">
+	    <tgroup cols="9" align="center">
+	      <colspec align="left" colwidth="2*" />
+	      <tbody valign="top">
+		<row>
+		  <entry>start&nbsp;+&nbsp;0:</entry>
+		  <entry>Y'<subscript>00low</subscript></entry>
+		  <entry>Y'<subscript>00high</subscript></entry>
+		  <entry>Y'<subscript>01low</subscript></entry>
+		  <entry>Y'<subscript>01high</subscript></entry>
+		  <entry>Y'<subscript>02low</subscript></entry>
+		  <entry>Y'<subscript>02high</subscript></entry>
+		  <entry>Y'<subscript>03low</subscript></entry>
+		  <entry>Y'<subscript>03high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;8:</entry>
+		  <entry>Y'<subscript>10low</subscript></entry>
+		  <entry>Y'<subscript>10high</subscript></entry>
+		  <entry>Y'<subscript>11low</subscript></entry>
+		  <entry>Y'<subscript>11high</subscript></entry>
+		  <entry>Y'<subscript>12low</subscript></entry>
+		  <entry>Y'<subscript>12high</subscript></entry>
+		  <entry>Y'<subscript>13low</subscript></entry>
+		  <entry>Y'<subscript>13high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;16:</entry>
+		  <entry>Y'<subscript>20low</subscript></entry>
+		  <entry>Y'<subscript>20high</subscript></entry>
+		  <entry>Y'<subscript>21low</subscript></entry>
+		  <entry>Y'<subscript>21high</subscript></entry>
+		  <entry>Y'<subscript>22low</subscript></entry>
+		  <entry>Y'<subscript>22high</subscript></entry>
+		  <entry>Y'<subscript>23low</subscript></entry>
+		  <entry>Y'<subscript>23high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;24:</entry>
+		  <entry>Y'<subscript>30low</subscript></entry>
+		  <entry>Y'<subscript>30high</subscript></entry>
+		  <entry>Y'<subscript>31low</subscript></entry>
+		  <entry>Y'<subscript>31high</subscript></entry>
+		  <entry>Y'<subscript>32low</subscript></entry>
+		  <entry>Y'<subscript>32high</subscript></entry>
+		  <entry>Y'<subscript>33low</subscript></entry>
+		  <entry>Y'<subscript>33high</subscript></entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	  </informaltable>
+	</para>
+      </formalpara>
+    </example>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml
index c6fdcbbd1b4..40af4beb48b 100644
--- a/Documentation/DocBook/v4l/pixfmt.xml
+++ b/Documentation/DocBook/v4l/pixfmt.xml
@@ -696,6 +696,7 @@ information.</para>
     &sub-packed-yuv;
     &sub-grey;
     &sub-y10;
+    &sub-y12;
     &sub-y16;
     &sub-yuyv;
     &sub-uyvy;
diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml
index 3c3b667b28e..160e464d44b 100644
--- a/Documentation/DocBook/v4l/remote_controllers.xml
+++ b/Documentation/DocBook/v4l/remote_controllers.xml
@@ -133,7 +133,7 @@ different IR's. Due to that, V4L2 API now specifies a standard for mapping Media
 <row><entry><constant>KEY_LEFT</constant></entry><entry>Left key</entry><entry>LEFT</entry></row>
 <row><entry><constant>KEY_RIGHT</constant></entry><entry>Right key</entry><entry>RIGHT</entry></row>
 
-<row><entry><emphasis role="bold">Miscelaneous keys</emphasis></entry></row>
+<row><entry><emphasis role="bold">Miscellaneous keys</emphasis></entry></row>
 
 <row><entry><constant>KEY_DOT</constant></entry><entry>Return a dot</entry><entry>.</entry></row>
 <row><entry><constant>KEY_FN</constant></entry><entry>Select a function</entry><entry>FUNCTION</entry></row>
diff --git a/Documentation/DocBook/v4l/subdev-formats.xml b/Documentation/DocBook/v4l/subdev-formats.xml
index 7041127d6df..d7ccd25edcc 100644
--- a/Documentation/DocBook/v4l/subdev-formats.xml
+++ b/Documentation/DocBook/v4l/subdev-formats.xml
@@ -456,6 +456,23 @@
 	      <entry>b<subscript>1</subscript></entry>
 	      <entry>b<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SGBRG8-1X8">
+	      <entry>V4L2_MBUS_FMT_SGBRG8_1X8</entry>
+	      <entry>0x3013</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SGRBG8-1X8">
 	      <entry>V4L2_MBUS_FMT_SGRBG8_1X8</entry>
 	      <entry>0x3002</entry>
@@ -473,6 +490,23 @@
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SRGGB8-1X8">
+	      <entry>V4L2_MBUS_FMT_SRGGB8_1X8</entry>
+	      <entry>0x3014</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SBGGR10-DPCM8-1X8">
 	      <entry>V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8</entry>
 	      <entry>0x300b</entry>
@@ -2159,6 +2193,31 @@
 	      <entry>u<subscript>1</subscript></entry>
 	      <entry>u<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-Y12-1X12">
+	      <entry>V4L2_MBUS_FMT_Y12_1X12</entry>
+	      <entry>0x2013</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>y<subscript>11</subscript></entry>
+	      <entry>y<subscript>10</subscript></entry>
+	      <entry>y<subscript>9</subscript></entry>
+	      <entry>y<subscript>8</subscript></entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-UYVY8-1X16">
 	      <entry>V4L2_MBUS_FMT_UYVY8_1X16</entry>
 	      <entry>0x200f</entry>
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 0ba149de260..58ced2346e6 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -4784,7 +4784,7 @@ struct _snd_pcm_runtime {
         FM registers can be directly accessed through the direct-FM API,
       defined in <filename>&lt;sound/asound_fm.h&gt;</filename>. In
       ALSA native mode, FM registers are accessed through
-      the Hardware-Dependant Device direct-FM extension API, whereas in
+      the Hardware-Dependent Device direct-FM extension API, whereas in
       OSS compatible mode, FM registers can be accessed with the OSS
       direct-FM compatible API in <filename>/dev/dmfmX</filename> device. 
       </para>
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index dcf7acc720e..3f5e0b09bed 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -253,8 +253,8 @@ In constrast, MSI is restricted to a maximum of 32 interrupts (and
 must be a power of two).  In addition, the MSI interrupt vectors must
 be allocated consecutively, so the system may not be able to allocate
 as many vectors for MSI as it could for MSI-X.  On some platforms, MSI
-interrupts must all be targetted at the same set of CPUs whereas MSI-X
-interrupts can all be targetted at different CPUs.
+interrupts must all be targeted at the same set of CPUs whereas MSI-X
+interrupts can all be targeted at different CPUs.
 
 4.5.2 Spinlocks
 
diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX
index 71b6f500ddb..1d7a885761f 100644
--- a/Documentation/RCU/00-INDEX
+++ b/Documentation/RCU/00-INDEX
@@ -21,7 +21,7 @@ rcu.txt
 RTFP.txt
 	- List of RCU papers (bibliography) going back to 1980.
 stallwarn.txt
-	- RCU CPU stall warnings (CONFIG_RCU_CPU_STALL_DETECTOR)
+	- RCU CPU stall warnings (module parameter rcu_cpu_stall_suppress)
 torture.txt
 	- RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST)
 trace.txt
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 862c08ef1fd..4e959208f73 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -1,22 +1,25 @@
 Using RCU's CPU Stall Detector
 
-The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables
-RCU's CPU stall detector, which detects conditions that unduly delay
-RCU grace periods.  The stall detector's idea of what constitutes
-"unduly delayed" is controlled by a set of C preprocessor macros:
+The rcu_cpu_stall_suppress module parameter enables RCU's CPU stall
+detector, which detects conditions that unduly delay RCU grace periods.
+This module parameter enables CPU stall detection by default, but
+may be overridden via boot-time parameter or at runtime via sysfs.
+The stall detector's idea of what constitutes "unduly delayed" is
+controlled by a set of kernel configuration variables and cpp macros:
 
-RCU_SECONDS_TILL_STALL_CHECK
+CONFIG_RCU_CPU_STALL_TIMEOUT
 
-	This macro defines the period of time that RCU will wait from
-	the beginning of a grace period until it issues an RCU CPU
-	stall warning.	This time period is normally ten seconds.
+	This kernel configuration parameter defines the period of time
+	that RCU will wait from the beginning of a grace period until it
+	issues an RCU CPU stall warning.  This time period is normally
+	ten seconds.
 
 RCU_SECONDS_TILL_STALL_RECHECK
 
 	This macro defines the period of time that RCU will wait after
 	issuing a stall warning until it issues another stall warning
-	for the same stall.  This time period is normally set to thirty
-	seconds.
+	for the same stall.  This time period is normally set to three
+	times the check interval plus thirty seconds.
 
 RCU_STALL_RAT_DELAY
 
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 6a8c73f55b8..c078ad48f7a 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -10,34 +10,46 @@ for rcutree and next for rcutiny.
 
 CONFIG_TREE_RCU and CONFIG_TREE_PREEMPT_RCU debugfs Files and Formats
 
-These implementations of RCU provides five debugfs files under the
-top-level directory RCU: rcu/rcudata (which displays fields in struct
-rcu_data), rcu/rcudata.csv (which is a .csv spreadsheet version of
-rcu/rcudata), rcu/rcugp (which displays grace-period counters),
-rcu/rcuhier (which displays the struct rcu_node hierarchy), and
-rcu/rcu_pending (which displays counts of the reasons that the
-rcu_pending() function decided that there was core RCU work to do).
+These implementations of RCU provides several debugfs files under the
+top-level directory "rcu":
+
+rcu/rcudata:
+	Displays fields in struct rcu_data.
+rcu/rcudata.csv:
+	Comma-separated values spreadsheet version of rcudata.
+rcu/rcugp:
+	Displays grace-period counters.
+rcu/rcuhier:
+	Displays the struct rcu_node hierarchy.
+rcu/rcu_pending:
+	Displays counts of the reasons rcu_pending() decided that RCU had
+	work to do.
+rcu/rcutorture:
+	Displays rcutorture test progress.
+rcu/rcuboost:
+	Displays RCU boosting statistics.  Only present if
+	CONFIG_RCU_BOOST=y.
 
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu_sched:
-  0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
-  1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
-  2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
-  3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
-  4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
-  5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
-  6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
-  7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
+  0 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=545/1/0 df=50 of=0 ri=0 ql=163 qs=NRW. kt=0/W/0 ktl=ebc3 b=10 ci=153737 co=0 ca=0
+  1 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=967/1/0 df=58 of=0 ri=0 ql=634 qs=NRW. kt=0/W/1 ktl=58c b=10 ci=191037 co=0 ca=0
+  2 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=1081/1/0 df=175 of=0 ri=0 ql=74 qs=N.W. kt=0/W/2 ktl=da94 b=10 ci=75991 co=0 ca=0
+  3 c=20942 g=20943 pq=1 pqc=20942 qp=1 dt=1846/0/0 df=404 of=0 ri=0 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=72261 co=0 ca=0
+  4 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=369/1/0 df=83 of=0 ri=0 ql=48 qs=N.W. kt=0/W/4 ktl=e0e7 b=10 ci=128365 co=0 ca=0
+  5 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=381/1/0 df=64 of=0 ri=0 ql=169 qs=NRW. kt=0/W/5 ktl=fb2f b=10 ci=164360 co=0 ca=0
+  6 c=20972 g=20973 pq=1 pqc=20972 qp=0 dt=1037/1/0 df=183 of=0 ri=0 ql=62 qs=N.W. kt=0/W/6 ktl=d2ad b=10 ci=65663 co=0 ca=0
+  7 c=20897 g=20897 pq=1 pqc=20896 qp=0 dt=1572/0/0 df=382 of=0 ri=0 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=75006 co=0 ca=0
 rcu_bh:
-  0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
-  1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
-  2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
-  4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  0 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=545/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/0 ktl=ebc3 b=10 ci=0 co=0 ca=0
+  1 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=967/1/0 df=3 of=0 ri=1 ql=0 qs=.... kt=0/W/1 ktl=58c b=10 ci=151 co=0 ca=0
+  2 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1081/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/2 ktl=da94 b=10 ci=0 co=0 ca=0
+  3 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1846/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=0 co=0 ca=0
+  4 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=369/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/4 ktl=e0e7 b=10 ci=0 co=0 ca=0
+  5 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=381/1/0 df=4 of=0 ri=1 ql=0 qs=.... kt=0/W/5 ktl=fb2f b=10 ci=0 co=0 ca=0
+  6 c=1480 g=1480 pq=1 pqc=1479 qp=0 dt=1037/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/6 ktl=d2ad b=10 ci=0 co=0 ca=0
+  7 c=1474 g=1474 pq=1 pqc=1473 qp=0 dt=1572/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=0 co=0 ca=0
 
 The first section lists the rcu_data structures for rcu_sched, the second
 for rcu_bh.  Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
@@ -52,17 +64,18 @@ o	The number at the beginning of each line is the CPU number.
 	substantially larger than the number of actual CPUs.
 
 o	"c" is the count of grace periods that this CPU believes have
-	completed.  CPUs in dynticks idle mode may lag quite a ways
-	behind, for example, CPU 4 under "rcu_sched" above, which has
-	slept through the past 25 RCU grace periods.  It is not unusual
-	to see CPUs lagging by thousands of grace periods.
+	completed.  Offlined CPUs and CPUs in dynticks idle mode may
+	lag quite a ways behind, for example, CPU 6 under "rcu_sched"
+	above, which has been offline through not quite 40,000 RCU grace
+	periods.  It is not unusual to see CPUs lagging by thousands of
+	grace periods.
 
 o	"g" is the count of grace periods that this CPU believes have
-	started.  Again, CPUs in dynticks idle mode may lag behind.
-	If the "c" and "g" values are equal, this CPU has already
-	reported a quiescent state for the last RCU grace period that
-	it is aware of, otherwise, the CPU believes that it owes RCU a
-	quiescent state.
+	started.  Again, offlined CPUs and CPUs in dynticks idle mode
+	may lag behind.  If the "c" and "g" values are equal, this CPU
+	has already reported a quiescent state for the last RCU grace
+	period that it is aware of, otherwise, the CPU believes that it
+	owes RCU a quiescent state.
 
 o	"pq" indicates that this CPU has passed through a quiescent state
 	for the current grace period.  It is possible for "pq" to be
@@ -81,7 +94,8 @@ o	"pqc" indicates which grace period the last-observed quiescent
 	the next grace period!
 
 o	"qp" indicates that RCU still expects a quiescent state from
-	this CPU.
+	this CPU.  Offlined CPUs and CPUs in dyntick idle mode might
+	well have qp=1, which is OK: RCU is still ignoring them.
 
 o	"dt" is the current value of the dyntick counter that is incremented
 	when entering or leaving dynticks idle state, either by the
@@ -108,7 +122,7 @@ o	"df" is the number of times that some other CPU has forced a
 
 o	"of" is the number of times that some other CPU has forced a
 	quiescent state on behalf of this CPU due to this CPU being
-	offline.  In a perfect world, this might neve happen, but it
+	offline.  In a perfect world, this might never happen, but it
 	turns out that offlining and onlining a CPU can take several grace
 	periods, and so there is likely to be an extended period of time
 	when RCU believes that the CPU is online when it really is not.
@@ -125,6 +139,62 @@ o	"ql" is the number of RCU callbacks currently residing on
 	of what state they are in (new, waiting for grace period to
 	start, waiting for grace period to end, ready to invoke).
 
+o	"qs" gives an indication of the state of the callback queue
+	with four characters:
+
+	"N"	Indicates that there are callbacks queued that are not
+		ready to be handled by the next grace period, and thus
+		will be handled by the grace period following the next
+		one.
+
+	"R"	Indicates that there are callbacks queued that are
+		ready to be handled by the next grace period.
+
+	"W"	Indicates that there are callbacks queued that are
+		waiting on the current grace period.
+
+	"D"	Indicates that there are callbacks queued that have
+		already been handled by a prior grace period, and are
+		thus waiting to be invoked.  Note that callbacks in
+		the process of being invoked are not counted here.
+		Callbacks in the process of being invoked are those
+		that have been removed from the rcu_data structures
+		queues by rcu_do_batch(), but which have not yet been
+		invoked.
+
+	If there are no callbacks in a given one of the above states,
+	the corresponding character is replaced by ".".
+
+o	"kt" is the per-CPU kernel-thread state.  The digit preceding
+	the first slash is zero if there is no work pending and 1
+	otherwise.  The character between the first pair of slashes is
+	as follows:
+
+	"S"	The kernel thread is stopped, in other words, all
+		CPUs corresponding to this rcu_node structure are
+		offline.
+
+	"R"	The kernel thread is running.
+
+	"W"	The kernel thread is waiting because there is no work
+		for it to do.
+
+	"O"	The kernel thread is waiting because it has been
+		forced off of its designated CPU or because its
+		->cpus_allowed mask permits it to run on other than
+		its designated CPU.
+
+	"Y"	The kernel thread is yielding to avoid hogging CPU.
+
+	"?"	Unknown value, indicates a bug.
+
+	The number after the final slash is the CPU that the kthread
+	is actually running on.
+
+o	"ktl" is the low-order 16 bits (in hexadecimal) of the count of
+	the number of times that this CPU's per-CPU kthread has gone
+	through its loop servicing invoke_rcu_cpu_kthread() requests.
+
 o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
@@ -174,14 +244,14 @@ o	"gpnum" is the number of grace periods that have started.  It is
 The output of "cat rcu/rcuhier" looks as follows, with very long lines:
 
 c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
-1/1 .>. 0:127 ^0    
-3/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
-3/3f .>. 0:5 ^0    2/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3    
+1/1 ..>. 0:127 ^0
+3/3 ..>. 0:35 ^0    0/0 ..>. 36:71 ^1    0/0 ..>. 72:107 ^2    0/0 ..>. 108:127 ^3
+3/3f ..>. 0:5 ^0    2/3 ..>. 6:11 ^1    0/0 ..>. 12:17 ^2    0/0 ..>. 18:23 ^3    0/0 ..>. 24:29 ^4    0/0 ..>. 30:35 ^5    0/0 ..>. 36:41 ^0    0/0 ..>. 42:47 ^1    0/0 ..>. 48:53 ^2    0/0 ..>. 54:59 ^3    0/0 ..>. 60:65 ^4    0/0 ..>. 66:71 ^5    0/0 ..>. 72:77 ^0    0/0 ..>. 78:83 ^1    0/0 ..>. 84:89 ^2    0/0 ..>. 90:95 ^3    0/0 ..>. 96:101 ^4    0/0 ..>. 102:107 ^5    0/0 ..>. 108:113 ^0    0/0 ..>. 114:119 ^1    0/0 ..>. 120:125 ^2    0/0 ..>. 126:127 ^3
 rcu_bh:
 c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
-0/1 .>. 0:127 ^0    
-0/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
-0/3f .>. 0:5 ^0    0/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3
+0/1 ..>. 0:127 ^0
+0/3 ..>. 0:35 ^0    0/0 ..>. 36:71 ^1    0/0 ..>. 72:107 ^2    0/0 ..>. 108:127 ^3
+0/3f ..>. 0:5 ^0    0/3 ..>. 6:11 ^1    0/0 ..>. 12:17 ^2    0/0 ..>. 18:23 ^3    0/0 ..>. 24:29 ^4    0/0 ..>. 30:35 ^5    0/0 ..>. 36:41 ^0    0/0 ..>. 42:47 ^1    0/0 ..>. 48:53 ^2    0/0 ..>. 54:59 ^3    0/0 ..>. 60:65 ^4    0/0 ..>. 66:71 ^5    0/0 ..>. 72:77 ^0    0/0 ..>. 78:83 ^1    0/0 ..>. 84:89 ^2    0/0 ..>. 90:95 ^3    0/0 ..>. 96:101 ^4    0/0 ..>. 102:107 ^5    0/0 ..>. 108:113 ^0    0/0 ..>. 114:119 ^1    0/0 ..>. 120:125 ^2    0/0 ..>. 126:127 ^3
 
 This is once again split into "rcu_sched" and "rcu_bh" portions,
 and CONFIG_TREE_PREEMPT_RCU kernels will again have an additional
@@ -240,13 +310,20 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		current grace period.
 
 	o	The characters separated by the ">" indicate the state
-		of the blocked-tasks lists.  A "T" preceding the ">"
+		of the blocked-tasks lists.  A "G" preceding the ">"
 		indicates that at least one task blocked in an RCU
 		read-side critical section blocks the current grace
-		period, while a "." preceding the ">" indicates otherwise.
-		The character following the ">" indicates similarly for
-		the next grace period.  A "T" should appear in this
-		field only for rcu-preempt.
+		period, while a "E" preceding the ">" indicates that
+		at least one task blocked in an RCU read-side critical
+		section blocks the current expedited grace period.
+		A "T" character following the ">" indicates that at
+		least one task is blocked within an RCU read-side
+		critical section, regardless of whether any current
+		grace period (expedited or normal) is inconvenienced.
+		A "." character appears if the corresponding condition
+		does not hold, so that "..>." indicates that no tasks
+		are blocked.  In contrast, "GE>T" indicates maximal
+		inconvenience from blocked tasks.
 
 	o	The numbers separated by the ":" are the range of CPUs
 		served by this struct rcu_node.  This can be helpful
@@ -328,6 +405,113 @@ o	"nn" is the number of times that this CPU needed nothing.  Alert
 	is due to short-circuit evaluation in rcu_pending().
 
 
+The output of "cat rcu/rcutorture" looks as follows:
+
+rcutorture test sequence: 0 (test in progress)
+rcutorture update version number: 615
+
+The first line shows the number of rcutorture tests that have completed
+since boot.  If a test is currently running, the "(test in progress)"
+string will appear as shown above.  The second line shows the number of
+update cycles that the current test has started, or zero if there is
+no test in progress.
+
+
+The output of "cat rcu/rcuboost" looks as follows:
+
+0:5 tasks=.... kt=W ntb=0 neb=0 nnb=0 j=2f95 bt=300f
+     balk: nt=0 egt=989 bt=0 nb=0 ny=0 nos=16
+6:7 tasks=.... kt=W ntb=0 neb=0 nnb=0 j=2f95 bt=300f
+     balk: nt=0 egt=225 bt=0 nb=0 ny=0 nos=6
+
+This information is output only for rcu_preempt.  Each two-line entry
+corresponds to a leaf rcu_node strcuture.  The fields are as follows:
+
+o	"n:m" is the CPU-number range for the corresponding two-line
+	entry.  In the sample output above, the first entry covers
+	CPUs zero through five and the second entry covers CPUs 6
+	and 7.
+
+o	"tasks=TNEB" gives the state of the various segments of the
+	rnp->blocked_tasks list:
+
+	"T"	This indicates that there are some tasks that blocked
+		while running on one of the corresponding CPUs while
+		in an RCU read-side critical section.
+
+	"N"	This indicates that some of the blocked tasks are preventing
+		the current normal (non-expedited) grace period from
+		completing.
+
+	"E"	This indicates that some of the blocked tasks are preventing
+		the current expedited grace period from completing.
+
+	"B"	This indicates that some of the blocked tasks are in
+		need of RCU priority boosting.
+
+	Each character is replaced with "." if the corresponding
+	condition does not hold.
+
+o	"kt" is the state of the RCU priority-boosting kernel
+	thread associated with the corresponding rcu_node structure.
+	The state can be one of the following:
+
+	"S"	The kernel thread is stopped, in other words, all
+		CPUs corresponding to this rcu_node structure are
+		offline.
+
+	"R"	The kernel thread is running.
+
+	"W"	The kernel thread is waiting because there is no work
+		for it to do.
+
+	"Y"	The kernel thread is yielding to avoid hogging CPU.
+
+	"?"	Unknown value, indicates a bug.
+
+o	"ntb" is the number of tasks boosted.
+
+o	"neb" is the number of tasks boosted in order to complete an
+	expedited grace period.
+
+o	"nnb" is the number of tasks boosted in order to complete a
+	normal (non-expedited) grace period.  When boosting a task
+	that was blocking both an expedited and a normal grace period,
+	it is counted against the expedited total above.
+
+o	"j" is the low-order 16 bits of the jiffies counter in
+	hexadecimal.
+
+o	"bt" is the low-order 16 bits of the value that the jiffies
+	counter will have when we next start boosting, assuming that
+	the current grace period does not end beforehand.  This is
+	also in hexadecimal.
+
+o	"balk: nt" counts the number of times we didn't boost (in
+	other words, we balked) even though it was time to boost because
+	there were no blocked tasks to boost.  This situation occurs
+	when there is one blocked task on one rcu_node structure and
+	none on some other rcu_node structure.
+
+o	"egt" counts the number of times we balked because although
+	there were blocked tasks, none of them were blocking the
+	current grace period, whether expedited or otherwise.
+
+o	"bt" counts the number of times we balked because boosting
+	had already been initiated for the current grace period.
+
+o	"nb" counts the number of times we balked because there
+	was at least one task blocking the current non-expedited grace
+	period that never had blocked.  If it is already running, it
+	just won't help to boost its priority!
+
+o	"ny" counts the number of times we balked because it was
+	not yet time to start boosting.
+
+o	"nos" counts the number of times we balked for other
+	reasons, e.g., the grace period ended first.
+
+
 CONFIG_TINY_RCU and CONFIG_TINY_PREEMPT_RCU debugfs Files and Formats
 
 These implementations of RCU provides a single debugfs file under the
@@ -394,9 +578,9 @@ o	"neb" is the number of expedited grace periods that have had
 o	"nnb" is the number of normal grace periods that have had
 	to resort to RCU priority boosting since boot.
 
-o	"j" is the low-order 12 bits of the jiffies counter in hexadecimal.
+o	"j" is the low-order 16 bits of the jiffies counter in hexadecimal.
 
-o	"bt" is the low-order 12 bits of the value that the jiffies counter
+o	"bt" is the low-order 16 bits of the value that the jiffies counter
 	will have at the next time that boosting is scheduled to begin.
 
 o	In the line beginning with "normal balk", the fields are as follows:
diff --git a/Documentation/SecurityBugs b/Documentation/SecurityBugs
index 26c3b3635d9..a660d494c8e 100644
--- a/Documentation/SecurityBugs
+++ b/Documentation/SecurityBugs
@@ -28,7 +28,7 @@ expect these delays to be short, measurable in days, not weeks or months.
 A disclosure date is negotiated by the security team working with the
 bug submitter as well as vendors.  However, the kernel security team
 holds the final say when setting a disclosure date.  The timeframe for
-disclosure is from immediate (esp. if it's already publically known)
+disclosure is from immediate (esp. if it's already publicly known)
 to a few weeks.  As a basic default policy, we expect report date to
 disclosure date to be on the order of 7 days.
 
diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers
index 38d2aab59ca..319baa8b60d 100644
--- a/Documentation/SubmittingDrivers
+++ b/Documentation/SubmittingDrivers
@@ -101,7 +101,7 @@ PM support:	Since Linux is used on many portable and desktop systems, your
 		complete overview of the power management issues related to
 		drivers see Documentation/power/devices.txt .
 
-Control:	In general if there is active maintainance of a driver by
+Control:	In general if there is active maintenance of a driver by
 		the author then patches will be redirected to them unless
 		they are totally obvious and without need of checking.
 		If you want to be the contact and update point for the
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 689e2371095..e439cd0d337 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -729,7 +729,7 @@ Linus Torvalds's mail on the canonical patch format:
   <http://lkml.org/lkml/2005/4/7/183>
 
 Andi Kleen, "On submitting kernel patches"
-  Some strategies to get difficult or controversal changes in.
+  Some strategies to get difficult or controversial changes in.
   http://halobates.de/on-submitting-patches.pdf
 
 --
diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx
index 133c5fa6c7a..7b9351f2f55 100644
--- a/Documentation/arm/IXP4xx
+++ b/Documentation/arm/IXP4xx
@@ -36,7 +36,7 @@ Linux currently supports the following features on the IXP4xx chips:
 - Timers (watchdog, OS)
 
 The following components of the chips are not supported by Linux and
-require the use of Intel's propietary CSR softare:
+require the use of Intel's proprietary CSR softare:
 
 - USB device interface
 - Network interfaces (HSS, Utopia, NPEs, etc)
@@ -47,7 +47,7 @@ software from:
 
    http://developer.intel.com/design/network/products/npfamily/ixp425.htm    
 
-DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY
+DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY
 SOFTWARE.
 
 There are several websites that provide directions/pointers on using
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index 7edd0e2e6c5..1ca63b3e563 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -116,7 +116,7 @@ Configuration
     Allows the entire memory to be checksummed before and after the
     suspend to see if there has been any corruption of the contents.
 
-    Note, the time to calculate the CRC is dependant on the CPU speed
+    Note, the time to calculate the CRC is dependent on the CPU speed
     and the size of memory. For an 64Mbyte RAM area on an 200MHz
     S3C2410, this can take approximately 4 seconds to complete.
 
diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt
index 05850c62abe..513f2562c1a 100644
--- a/Documentation/arm/Samsung/GPIO.txt
+++ b/Documentation/arm/Samsung/GPIO.txt
@@ -5,7 +5,7 @@ Introduction
 ------------
 
 This outlines the Samsung GPIO implementation and the architecture
-specfic calls provided alongisde the drivers/gpio core.
+specific calls provided alongisde the drivers/gpio core.
 
 
 S3C24XX (Legacy)
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 2a7b38c832c..c6d84cfd2f5 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -497,7 +497,7 @@ The scatter gather list is in the form of an array of <page, offset, len>
 entries with their corresponding dma address mappings filled in at the
 appropriate time. As an optimization, contiguous physical pages can be
 covered by a single entry where <page> refers to the first page and <len>
-covers the range of pages (upto 16 contiguous pages could be covered this
+covers the range of pages (up to 16 contiguous pages could be covered this
 way). There is a helper routine (blk_rq_map_sg) which drivers can use to build
 the sg list.
 
@@ -565,7 +565,7 @@ struct request {
 	.
 	int tag;	/* command tag associated with request */
 	void *special;  /* same as before */
-	char *buffer;   /* valid only for low memory buffers upto
+	char *buffer;   /* valid only for low memory buffers up to
 			 current_nr_sectors */
 	.
 	.
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index cbdfb7d9455..aedf1bd02fd 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -110,22 +110,22 @@ university server with various users - students, professors, system
 tasks etc. The resource planning for this server could be along the
 following lines:
 
-       CPU :           Top cpuset
+       CPU :          "Top cpuset"
                        /       \
                CPUSet1         CPUSet2
-                  |              |
-               (Profs)         (Students)
+                  |               |
+               (Professors)    (Students)
 
                In addition (system tasks) are attached to topcpuset (so
                that they can run anywhere) with a limit of 20%
 
-       Memory : Professors (50%), students (30%), system (20%)
+       Memory : Professors (50%), Students (30%), system (20%)
 
-       Disk : Prof (50%), students (30%), system (20%)
+       Disk : Professors (50%), Students (30%), system (20%)
 
        Network : WWW browsing (20%), Network File System (60%), others (20%)
                                / \
-                       Prof (15%) students (5%)
+               Professors (15%)  students (5%)
 
 Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go
 into NFS network class.
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index b6ed61c9585..7c163477fcd 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -52,8 +52,10 @@ Brief summary of control files.
  tasks				 # attach a task(thread) and show list of threads
  cgroup.procs			 # show list of processes
  cgroup.event_control		 # an interface for event_fd()
- memory.usage_in_bytes		 # show current memory(RSS+Cache) usage.
- memory.memsw.usage_in_bytes	 # show current memory+Swap usage
+ memory.usage_in_bytes		 # show current res_counter usage for memory
+				 (See 5.5 for details)
+ memory.memsw.usage_in_bytes	 # show current res_counter usage for memory+Swap
+				 (See 5.5 for details)
  memory.limit_in_bytes		 # set/show limit of memory usage
  memory.memsw.limit_in_bytes	 # set/show limit of memory+Swap usage
  memory.failcnt			 # show the number of memory usage hits limits
@@ -453,6 +455,15 @@ memory under it will be reclaimed.
 You can reset failcnt by writing 0 to failcnt file.
 # echo 0 > .../memory.failcnt
 
+5.5 usage_in_bytes
+
+For efficiency, as other kernel components, memory cgroup uses some optimization
+to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the
+method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz
+value for efficient access. (Of course, when necessary, it's synchronized.)
+If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
+value in memory.stat(see 5.2).
+
 6. Hierarchy support
 
 The memory controller supports a deep hierarchy and hierarchical accounting.
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index 45d5a217484..a20bfd415e4 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -196,7 +196,7 @@ the state as 0 when a cpu if offline and 1 when its online.
 	#To display the current cpu state.
 	#cat /sys/devices/system/cpu/cpuX/online
 
-Q: Why cant i remove CPU0 on some systems?
+Q: Why can't i remove CPU0 on some systems?
 A: Some architectures may have some special dependency on a certain CPU.
 
 For e.g in IA64 platforms we have ability to sent platform interrupts to the
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index 15174985ad0..d262e22bdde 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -62,7 +62,7 @@ image file and then arrange all these packets back to back in to one single
 file.
 This file is then copied to /sys/class/firmware/dell_rbu/data.
 Once this file gets to the driver, the driver extracts packet_size data from
-the file and spreads it accross the physical memory in contiguous packet_sized
+the file and spreads it across the physical memory in contiguous packet_sized
 space.
 This method makes sure that all the packets get to the driver in a single operation.
 
diff --git a/Documentation/device-mapper/dm-service-time.txt b/Documentation/device-mapper/dm-service-time.txt
index 7d00668e97b..fb1d4a0cf12 100644
--- a/Documentation/device-mapper/dm-service-time.txt
+++ b/Documentation/device-mapper/dm-service-time.txt
@@ -37,7 +37,7 @@ Algorithm
 =========
 
 dm-service-time adds the I/O size to 'in-flight-size' when the I/O is
-dispatched and substracts when completed.
+dispatched and subtracts when completed.
 Basically, dm-service-time selects a path having minimum service time
 which is calculated by:
 
diff --git a/Documentation/devicetree/bindings/fb/sm501fb.txt b/Documentation/devicetree/bindings/fb/sm501fb.txt
index 7d319fba9b5..9d9f0098092 100644
--- a/Documentation/devicetree/bindings/fb/sm501fb.txt
+++ b/Documentation/devicetree/bindings/fb/sm501fb.txt
@@ -18,9 +18,9 @@ Optional properties:
 - edid : verbatim EDID data block describing attached display.
   Data from the detailed timing descriptor will be used to
   program the display controller.
-- little-endian: availiable on big endian systems, to
+- little-endian: available on big endian systems, to
   set different foreign endian.
-- big-endian: availiable on little endian systems, to
+- big-endian: available on little endian systems, to
   set different foreign endian.
 
 Example for MPC5200:
diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
index a48b2cadc7f..00f1f546b32 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
@@ -15,7 +15,7 @@ Optional properties:
 - gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins
 	(R/B#). For multi-chip devices, "n" GPIO definitions are required
 	according to the number of chips.
-- chip-delay : chip dependent delay for transfering data from array to
+- chip-delay : chip dependent delay for transferring data from array to
 	read registers (tR). Required if property "gpios" is not used
 	(R/B# pins not connected).
 
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
new file mode 100755
index 00000000000..1a729f08986
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
@@ -0,0 +1,61 @@
+CAN Device Tree Bindings
+------------------------
+2011 Freescale Semiconductor, Inc.
+
+fsl,flexcan-v1.0 nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller.
+
+CPI Clock- Can Protocol Interface Clock
+	This CLK_SRC bit of CTRL(control register) selects the clock source to
+	the CAN Protocol Interface(CPI) to be either the peripheral clock
+	(driven by the PLL) or the crystal oscillator clock. The selected clock
+	is the one fed to the prescaler to generate the Serial Clock (Sclock).
+	The PRESDIV field of CTRL(control register) controls a prescaler that
+	generates the Serial Clock (Sclock), whose period defines the
+	time quantum used to compose the CAN waveform.
+
+Can Engine Clock Source
+	There are two sources for CAN clock
+	- Platform Clock  It represents the bus clock
+	- Oscillator Clock
+
+	Peripheral Clock (PLL)
+	--------------
+		     |
+		    ---------		      -------------
+		    |       |CPI Clock	      | Prescaler |       Sclock
+		    |       |---------------->| (1.. 256) |------------>
+		    ---------		      -------------
+                     |  |
+	--------------  ---------------------CLK_SRC
+	Oscillator Clock
+
+- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects
+			     the peripheral clock. PLL clock is fed to the
+			     prescaler to generate the Serial Clock (Sclock).
+			     Valid values are "oscillator" and "platform"
+			     "oscillator": CAN engine clock source is oscillator clock.
+			     "platform" The CAN engine clock source is the bus clock
+		             (platform clock).
+
+- fsl,flexcan-clock-divider : for the reference and system clock, an additional
+			      clock divider can be specified.
+- clock-frequency: frequency required to calculate the bitrate for FlexCAN.
+
+Note:
+	- v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC.
+	- P1010 does not have oscillator as the Clock Source.So the default
+	  Clock Source is platform clock.
+Examples:
+
+	can0@1c000 {
+		compatible = "fsl,flexcan-v1.0";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2>;
+		interrupt-parent = <&mpic>;
+		fsl,flexcan-clock-source = "platform";
+		fsl,flexcan-clock-divider = <2>;
+		clock-frequency = <fixed by u-boot>;
+	};
diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt
index d6d209ded93..c2dbcec0ee3 100644
--- a/Documentation/devicetree/bindings/net/can/sja1000.txt
+++ b/Documentation/devicetree/bindings/net/can/sja1000.txt
@@ -39,7 +39,7 @@ Optional properties:
 
 - nxp,no-comparator-bypass : Allows to disable the CAN input comperator.
 
-For futher information, please have a look to the SJA1000 data sheet.
+For further information, please have a look to the SJA1000 data sheet.
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt
new file mode 100644
index 00000000000..939a26d541f
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt
@@ -0,0 +1,76 @@
+Integrated Flash Controller
+
+Properties:
+- name : Should be ifc
+- compatible : should contain "fsl,ifc". The version of the integrated
+               flash controller can be found in the IFC_REV register at
+               offset zero.
+
+- #address-cells : Should be either two or three.  The first cell is the
+                   chipselect number, and the remaining cells are the
+                   offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+                can be.
+- reg : Offset and length of the register set for the device
+- interrupts : IFC has two interrupts. The first one is the "common"
+               interrupt(CM_EVTER_STAT), and second is the NAND interrupt
+               (NAND_EVTER_STAT).
+
+- ranges : Each range corresponds to a single chipselect, and covers
+           the entire access window as configured.
+
+Child device nodes describe the devices connected to IFC such as NOR (e.g.
+cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+like FPGAs, CPLDs, etc.
+
+Example:
+
+	ifc@ffe1e000 {
+		compatible = "fsl,ifc", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x0 0xffe1e000 0 0x2000>;
+		interrupts = <16 2 19 2>;
+
+		/* NOR, NAND Flashes and CPLD on board */
+		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+			  0x1 0x0 0x0 0xffa00000 0x00010000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 32MB for user data */
+				reg = <0x0 0x02000000>;
+				label = "NOR Data";
+			};
+		};
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+		};
+
+		cpld@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1010rdb-cpld";
+			reg = <0x3 0x0 0x000001f>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
new file mode 100644
index 00000000000..df41958140e
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
@@ -0,0 +1,38 @@
+* Freescale MPIC timers
+
+Required properties:
+- compatible: "fsl,mpic-global-timer"
+
+- reg : Contains two regions.  The first is the main timer register bank
+  (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx).  The second is the timer control
+  register (TCRx) for the group.
+
+- fsl,available-ranges: use <start count> style section to define which
+  timer interrupts can be used.  This property is optional; without this,
+  all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+  with timer zero.  If timer-available-ranges is present, only the
+  interrupts that correspond to available timers shall be present.
+
+Example:
+	/* Note that this requires #interrupt-cells to be 4 */
+	timer0: timer@41100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x41100 0x100 0x41300 4>;
+
+		/* Another AMP partition is using timers 0 and 1 */
+		fsl,available-ranges = <2 2>;
+
+		interrupts = <2 0 3 0
+		              3 0 3 0>;
+	};
+
+	timer1: timer@42100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x42100 0x100 0x42300 4>;
+		interrupts = <4 0 3 0
+		              5 0 3 0
+		              6 0 3 0
+		              7 0 3 0>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
index 8aa10f45ebe..2cf38bd841f 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
@@ -190,7 +190,7 @@ EXAMPLE 4
 	 */
 	timer0: timer@41100 {
 		compatible = "fsl,mpic-global-timer";
-		reg = <0x41100 0x100>;
+		reg = <0x41100 0x100 0x41300 4>;
 		interrupts = <0 0 3 0
 		              1 0 3 0
 		              2 0 3 0
@@ -199,7 +199,7 @@ EXAMPLE 4
 
 EXAMPLE 5
 	/*
-	 * Definition of an error interrupt (interupt type 1).
+	 * Definition of an error interrupt (interrupt type 1).
 	 * SoC interrupt number is 16 and the specific error
          * interrupt bit in the error interrupt summary register
 	 * is 23.
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index 55fd2623445..50619a0720a 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -138,7 +138,7 @@ and properties to be present. This will be described in detail in
 section III, but, for example, the kernel does not require you to
 create a node for every PCI device in the system. It is a requirement
 to have a node for PCI host bridges in order to provide interrupt
-routing informations and memory/IO ranges, among others. It is also
+routing information and memory/IO ranges, among others. It is also
 recommended to define nodes for on chip devices and other buses that
 don't specifically fit in an existing OF specification. This creates a
 great flexibility in the way the kernel can then probe those and match
@@ -385,7 +385,7 @@ struct boot_param_header {
      among others, by kexec. If you are on an SMP system, this value
      should match the content of the "reg" property of the CPU node in
      the device-tree corresponding to the CPU calling the kernel entry
-     point (see further chapters for more informations on the required
+     point (see further chapters for more information on the required
      device-tree contents)
 
    - size_dt_strings
@@ -553,7 +553,7 @@ looks like in practice.
 
 This tree is almost a minimal tree. It pretty much contains the
 minimal set of required nodes and properties to boot a linux kernel;
-that is, some basic model informations at the root, the CPUs, and the
+that is, some basic model information at the root, the CPUs, and the
 physical memory layout.  It also includes misc information passed
 through /chosen, like in this example, the platform type (mandatory)
 and the kernel command line arguments (optional).
diff --git a/Documentation/driver-model/bus.txt b/Documentation/driver-model/bus.txt
index 5001b751162..6754b2df8aa 100644
--- a/Documentation/driver-model/bus.txt
+++ b/Documentation/driver-model/bus.txt
@@ -3,24 +3,7 @@ Bus Types
 
 Definition
 ~~~~~~~~~~
-
-struct bus_type {
-	char			* name;
-
-	struct subsystem	subsys;
-	struct kset		drivers;
-	struct kset		devices;
-
-	struct bus_attribute	* bus_attrs;
-	struct device_attribute	* dev_attrs;
-	struct driver_attribute	* drv_attrs;
-
-	int		(*match)(struct device * dev, struct device_driver * drv);
-	int		(*hotplug) (struct device *dev, char **envp, 
-				    int num_envp, char *buffer, int buffer_size);
-	int		(*suspend)(struct device * dev, pm_message_t state);
-	int		(*resume)(struct device * dev);
-};
+See the kerneldoc for the struct bus_type.
 
 int bus_register(struct bus_type * bus);
 
diff --git a/Documentation/driver-model/class.txt b/Documentation/driver-model/class.txt
index 548505f14aa..1fefc480a80 100644
--- a/Documentation/driver-model/class.txt
+++ b/Documentation/driver-model/class.txt
@@ -27,22 +27,7 @@ The device class structure looks like:
 typedef int (*devclass_add)(struct device *);
 typedef void (*devclass_remove)(struct device *);
 
-struct device_class {
-	char			* name;
-	rwlock_t		lock;
-	u32			devnum;
-	struct list_head	node;
-
-	struct list_head	drivers;
-	struct list_head	intf_list;
-
-	struct driver_dir_entry	dir;
-	struct driver_dir_entry	device_dir;
-	struct driver_dir_entry	driver_dir;
-
-	devclass_add		add_device;
-	devclass_remove		remove_device;
-};
+See the kerneldoc for the struct class.
 
 A typical device class definition would look like: 
 
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index a124f3126b0..b2ff42685bc 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -2,96 +2,7 @@
 The Basic Device Structure
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-struct device {
-        struct list_head g_list;
-        struct list_head node;
-        struct list_head bus_list;
-        struct list_head driver_list;
-        struct list_head intf_list;
-        struct list_head children;
-        struct device   * parent;
-
-        char    name[DEVICE_NAME_SIZE];
-        char    bus_id[BUS_ID_SIZE];
-
-        spinlock_t      lock;
-        atomic_t        refcount;
-
-        struct bus_type * bus;
-        struct driver_dir_entry dir;
-
-	u32		class_num;
-
-        struct device_driver *driver;
-        void            *driver_data;
-        void            *platform_data;
-
-        u32             current_state;
-        unsigned char *saved_state;
-
-        void    (*release)(struct device * dev);
-};
-
-Fields 
-~~~~~~
-g_list:	Node in the global device list.
-
-node:	Node in device's parent's children list.
-
-bus_list: Node in device's bus's devices list.
-
-driver_list:   Node in device's driver's devices list.
-
-intf_list:     List of intf_data. There is one structure allocated for
-	       each interface that the device supports.
-
-children:      List of child devices.
-
-parent:        *** FIXME ***
-
-name:	       ASCII description of device. 
-	       Example: " 3Com Corporation 3c905 100BaseTX [Boomerang]"
-
-bus_id:	       ASCII representation of device's bus position. This 
-	       field should be a name unique across all devices on the
-	       bus type the device belongs to. 
-
-	       Example: PCI bus_ids are in the form of
-	       <bus number>:<slot number>.<function number> 
-	       This name is unique across all PCI devices in the system.
-
-lock:	       Spinlock for the device. 
-
-refcount:      Reference count on the device.
-
-bus:	       Pointer to struct bus_type that device belongs to.
-
-dir:	       Device's sysfs directory.
-
-class_num:     Class-enumerated value of the device.
-
-driver:	       Pointer to struct device_driver that controls the device.
-
-driver_data:   Driver-specific data.
-
-platform_data: Platform data specific to the device.
-
-	       Example:  for devices on custom boards, as typical of embedded
-	       and SOC based hardware, Linux often uses platform_data to point
-	       to board-specific structures describing devices and how they
-	       are wired.  That can include what ports are available, chip
-	       variants, which GPIO pins act in what additional roles, and so
-	       on.  This shrinks the "Board Support Packages" (BSPs) and
-	       minimizes board-specific #ifdefs in drivers.
-
-current_state: Current power state of the device.
-
-saved_state:   Pointer to saved state of the device. This is usable by
-	       the device driver controlling the device.
-
-release:       Callback to free the device after all references have 
-	       gone away. This should be set by the allocator of the 
-	       device (i.e. the bus driver that discovered the device).
+See the kerneldoc for the struct device.
 
 
 Programming Interface
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index d2cd6fb8ba9..4421135826a 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -1,23 +1,7 @@
 
 Device Drivers
 
-struct device_driver {
-        char                    * name;
-        struct bus_type         * bus;
-
-        struct completion	unloaded;
-        struct kobject		kobj;
-        list_t                  devices;
-
-        struct module		*owner;
-
-        int     (*probe)        (struct device * dev);
-        int     (*remove)       (struct device * dev);
-
-        int     (*suspend)      (struct device * dev, pm_message_t state);
-        int     (*resume)       (struct device * dev);
-};
-
+See the kerneldoc for the struct device_driver.
 
 
 Allocation
diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb
index c8238e44ed6..c4d963a67d6 100644
--- a/Documentation/dvb/README.dvb-usb
+++ b/Documentation/dvb/README.dvb-usb
@@ -138,7 +138,7 @@ Hotplug is able to load the driver, when it is needed (because you plugged
 in the device).
 
 If you want to enable debug output, you have to load the driver manually and
-from withing the dvb-kernel cvs repository.
+from within the dvb-kernel cvs repository.
 
 first have a look, which debug level are available:
 
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
index 4a0c2b56e69..6c3bda50f7d 100644
--- a/Documentation/dvb/ci.txt
+++ b/Documentation/dvb/ci.txt
@@ -47,7 +47,7 @@ so on.
 
 * CI modules that are supported
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The CI module support is largely dependant upon the firmware on the cards
+The CI module support is largely dependent upon the firmware on the cards
 Some cards do support almost all of the available CI modules. There is
 nothing much that can be done in order to make additional CI modules
 working with these cards.
diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
index 121832e5d89..97b1373f242 100644
--- a/Documentation/dvb/faq.txt
+++ b/Documentation/dvb/faq.txt
@@ -106,7 +106,7 @@ Some very frequently asked questions about linuxtv-dvb
 5. The dvb_net device doesn't give me any packets at all
 
 	Run tcpdump on the dvb0_0 interface. This sets the interface
-	into promiscous mode so it accepts any packets from the PID
+	into promiscuous mode so it accepts any packets from the PID
 	you have configured with the dvbnet utility. Check if there
 	are any packets with the IP addr and MAC addr you have
 	configured with ifconfig.
diff --git a/Documentation/dvb/udev.txt b/Documentation/dvb/udev.txt
index 68ee224b6aa..412305b7c55 100644
--- a/Documentation/dvb/udev.txt
+++ b/Documentation/dvb/udev.txt
@@ -1,7 +1,7 @@
 The DVB subsystem currently registers to the sysfs subsystem using the
 "class_simple" interface.
 
-This means that only the basic informations like module loading parameters
+This means that only the basic information like module loading parameters
 are presented through sysfs. Other things that might be interesting are
 currently *not* available.
 
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 9ee774de57c..249822cde82 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -311,7 +311,7 @@ Total Correctable Errors count attribute file:
 	'ce_noinfo_count'
 
 	This attribute file displays the number of CEs that
-	have occurred wherewith no informations as to which DIMM slot
+	have occurred wherewith no information as to which DIMM slot
 	is having errors. Memory is handicapped, but operational,
 	yet no information is available to indicate which slot
 	the failing memory is in. This count field should be also
@@ -741,7 +741,7 @@ were done at i7core_edac driver. This chapter will cover those differences
    As EDAC API maps the minimum unity is csrows, the driver sequencially
    maps channel/dimm into different csrows.
 
-   For example, suposing the following layout:
+   For example, supposing the following layout:
 	Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs
 	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
 	  dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index f297fc1202a..38cf0c7b559 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -84,7 +84,7 @@ struct eisa_driver {
 
 id_table	: an array of NULL terminated EISA id strings,
 		  followed by an empty string. Each string can
-		  optionally be paired with a driver-dependant value
+		  optionally be paired with a driver-dependent value
 		  (driver_data).
 
 driver		: a generic driver, such as described in
diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt
index 1a2e8aa3fbb..444e34b52ae 100644
--- a/Documentation/fb/viafb.txt
+++ b/Documentation/fb/viafb.txt
@@ -204,7 +204,7 @@ Notes:
 
     supported_output_devices
 
-        This read-only file contains a full ',' seperated list containing all
+        This read-only file contains a full ',' separated list containing all
         output devices that could be available on your platform. It is likely
         that not all of those have a connector on your hardware but it should
         provide a good starting point to figure out which of those names match
@@ -225,7 +225,7 @@ Notes:
         This can happen for example if only one (the other) iga is used.
         Writing to these files allows adjusting the output devices during
         runtime. One can add new devices, remove existing ones or switch
-        between igas. Essentially you can write a ',' seperated list of device
+        between igas. Essentially you can write a ',' separated list of device
         names (or a single one) in the same format as the output to those
         files. You can add a '+' or '-' as a prefix allowing simple addition
         and removal of devices. So a prefix '+' adds the devices from your list
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 05ed6f301d8..4cba260e305 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -376,26 +376,6 @@ Who:	Tejun Heo <tj@kernel.org>
 
 ----------------------------
 
-What:	Support for lcd_switch and display_get in asus-laptop driver
-When:	March 2010
-Why:	These two features use non-standard interfaces. There are the
-	only features that really need multiple path to guess what's
-	the right method name on a specific laptop.
-
-	Removing them will allow to remove a lot of code an significantly
-	clean the drivers.
-
-	This will affect the backlight code which won't be able to know
-	if the backlight is on or off. The platform display file will also be
-	write only (like the one in eeepc-laptop).
-
-	This should'nt affect a lot of user because they usually know
-	when their display is on or off.
-
-Who:	Corentin Chary <corentin.chary@gmail.com>
-
-----------------------------
-
 What:	sysfs-class-rfkill state file
 When:	Feb 2014
 Files:	net/rfkill/core.c
@@ -414,16 +394,6 @@ Who: 	anybody or Florian Mickler <florian@mickler.org>
 
 ----------------------------
 
-What:	capifs
-When:	February 2011
-Files:	drivers/isdn/capi/capifs.*
-Why:	udev fully replaces this special file system that only contains CAPI
-	NCCI TTY device nodes. User space (pppdcapiplugin) works without
-	noticing the difference.
-Who:	Jan Kiszka <jan.kiszka@web.de>
-
-----------------------------
-
 What:	KVM paravirt mmu host support
 When:	January 2011
 Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
@@ -469,14 +439,6 @@ Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ----------------------------
 
-What:	The acpi_sleep=s4_nonvs command line option
-When:	2.6.37
-Files:	arch/x86/kernel/acpi/sleep.c
-Why:	superseded by acpi_sleep=nonvs
-Who:	Rafael J. Wysocki <rjw@sisk.pl>
-
-----------------------------
-
 What: 	PCI DMA unmap state API
 When:	August 2012
 Why:	PCI DMA unmap state API (include/linux/pci-dma.h) was replaced
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index 51986bf08a4..4c95935cbcf 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -309,7 +309,7 @@ ioctlfd field set to the descriptor obtained from the open call.
 AUTOFS_DEV_IOCTL_TIMEOUT_CMD
 ----------------------------
 
-Set the expire timeout for mounts withing an autofs mount point.
+Set the expire timeout for mounts within an autofs mount point.
 
 The call requires an initialized struct autofs_dev_ioctl with the
 ioctlfd field set to the descriptor obtained from the open call.
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 1902c57b72e..a167ab876c3 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -95,7 +95,7 @@ restraints as possible on how an index is structured and where it is placed in
 the tree.  The netfs can even mix indices and data files at the same level, but
 it's not recommended.
 
-Each index entry consists of a key of indeterminate length plus some auxilliary
+Each index entry consists of a key of indeterminate length plus some auxiliary
 data, also of indeterminate length.
 
 There are some limits on indices:
@@ -203,23 +203,23 @@ This has the following fields:
 
      If the function is absent, a file size of 0 is assumed.
 
- (6) A function to retrieve auxilliary data from the netfs [optional].
+ (6) A function to retrieve auxiliary data from the netfs [optional].
 
      This function will be called with the netfs data that was passed to the
-     cookie acquisition function and the maximum length of auxilliary data that
-     it may provide.  It should write the auxilliary data into the given buffer
+     cookie acquisition function and the maximum length of auxiliary data that
+     it may provide.  It should write the auxiliary data into the given buffer
      and return the quantity it wrote.
 
-     If this function is absent, the auxilliary data length will be set to 0.
+     If this function is absent, the auxiliary data length will be set to 0.
 
-     The length of the auxilliary data buffer may be dependent on the key
+     The length of the auxiliary data buffer may be dependent on the key
      length.  A netfs mustn't rely on being able to provide more than 400 bytes
      for both.
 
- (7) A function to check the auxilliary data [optional].
+ (7) A function to check the auxiliary data [optional].
 
      This function will be called to check that a match found in the cache for
-     this object is valid.  For instance with AFS it could check the auxilliary
+     this object is valid.  For instance with AFS it could check the auxiliary
      data against the data version number returned by the server to determine
      whether the index entry in a cache is still valid.
 
@@ -232,7 +232,7 @@ This has the following fields:
 	(*) FSCACHE_CHECKAUX_NEEDS_UPDATE	- the entry requires update
 	(*) FSCACHE_CHECKAUX_OBSOLETE		- the entry should be deleted
 
-     This function can also be used to extract data from the auxilliary data in
+     This function can also be used to extract data from the auxiliary data in
      the cache and copy it into the netfs's structures.
 
  (8) A pair of functions to manage contexts for the completion callback
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index fabcb0e00f2..dd57bb6bb39 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -409,7 +409,7 @@ As a consequence of this, default_groups cannot be removed directly via
 rmdir(2).  They also are not considered when rmdir(2) on the parent
 group is checking for children.
 
-[Dependant Subsystems]
+[Dependent Subsystems]
 
 Sometimes other drivers depend on particular configfs items.  For
 example, ocfs2 mounts depend on a heartbeat region item.  If that
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 6b050464a90..c79ec58fd7f 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -97,7 +97,7 @@ Note: More extensive information for getting started with ext4 can be
 * Inode allocation using large virtual block groups via flex_bg
 * delayed allocation
 * large block (up to pagesize) support
-* efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force
+* efficient new ordered mode in JBD2 and ext4(avoid using buffer head to force
   the ordering)
 
 [1] Filesystems with a block size of 1k may see a limit imposed by the
@@ -106,7 +106,7 @@ directory hash tree having a maximum depth of two.
 2.2 Candidate features for future inclusion
 
 * Online defrag (patches available but not well tested)
-* reduced mke2fs time via lazy itable initialization in conjuction with
+* reduced mke2fs time via lazy itable initialization in conjunction with
   the uninit_bg feature (capability to do this is available in e2fsprogs
   but a kernel thread to do lazy zeroing of unused inode table blocks
   after filesystem is first mounted is required for safety)
diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt
index fd966dc9979..d8188966929 100644
--- a/Documentation/filesystems/gfs2-uevents.txt
+++ b/Documentation/filesystems/gfs2-uevents.txt
@@ -62,7 +62,7 @@ be fixed.
 
 The REMOVE uevent is generated at the end of an unsuccessful mount
 or at the end of a umount of the filesystem. All REMOVE uevents will
-have been preceeded by at least an ADD uevent for the same fileystem,
+have been preceded by at least an ADD uevent for the same fileystem,
 and unlike the other uevents is generated automatically by the kernel's
 kobject subsystem.
 
diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.txt
index 0b59c020091..4cda926628a 100644
--- a/Documentation/filesystems/gfs2.txt
+++ b/Documentation/filesystems/gfs2.txt
@@ -11,7 +11,7 @@ their I/O so file system consistency is maintained.  One of the nifty
 features of GFS is perfect consistency -- changes made to the file system
 on one machine show up immediately on all other machines in the cluster.
 
-GFS uses interchangable inter-node locking mechanisms, the currently
+GFS uses interchangeable inter-node locking mechanisms, the currently
 supported mechanisms are:
 
   lock_nolock -- allows gfs to be used as a local file system
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index 933bc66ccff..791af8dac06 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -350,7 +350,7 @@ Note the "Should sync?" parameter "nosync" means that the two mirrors are
 already in sync which will be the case on a clean shutdown of Windows.  If the
 mirrors are not clean, you can specify the "sync" option instead of "nosync"
 and the Device-Mapper driver will then copy the entirety of the "Source Device"
-to the "Target Device" or if you specified multipled target devices to all of
+to the "Target Device" or if you specified multiple target devices to all of
 them.
 
 Once you have your table, save it in a file somewhere (e.g. /etc/ntfsvolume1),
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 5393e661169..9ed920a8cd7 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -80,7 +80,7 @@ user_xattr	(*)	Enables Extended User Attributes.
 nouser_xattr		Disables Extended User Attributes.
 acl			Enables POSIX Access Control Lists support.
 noacl		(*)	Disables POSIX Access Control Lists support.
-resv_level=2	(*)	Set how agressive allocation reservations will be.
+resv_level=2	(*)	Set how aggressive allocation reservations will be.
 			Valid values are between 0 (reservations off) to 8
 			(maximum space for reservations).
 dir_resv_level=	(*)	By default, directory reservations will scale with file
diff --git a/Documentation/filesystems/path-lookup.txt b/Documentation/filesystems/path-lookup.txt
index eb59c8b44be..3571667c710 100644
--- a/Documentation/filesystems/path-lookup.txt
+++ b/Documentation/filesystems/path-lookup.txt
@@ -42,7 +42,7 @@ Path walking overview
 A name string specifies a start (root directory, cwd, fd-relative) and a
 sequence of elements (directory entry names), which together refer to a path in
 the namespace. A path is represented as a (dentry, vfsmount) tuple. The name
-elements are sub-strings, seperated by '/'.
+elements are sub-strings, separated by '/'.
 
 Name lookups will want to find a particular path that a name string refers to
 (usually the final element, or parent of final element). This is done by taking
@@ -354,7 +354,7 @@ vfstest 24185492        4945    708725(2.9%) 1076136(4.4%)     0        2651
 
 What this shows is that failed rcu-walk lookups, ie. ones that are restarted
 entirely with ref-walk, are quite rare. Even the "vfstest" case which
-specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to excercise
+specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to exercise
 such races is not showing a huge amount of restarts.
 
 Dropping from rcu-walk to ref-walk mean that we have encountered a dentry where
diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt
index 40ea6c295af..65e03dd4482 100644
--- a/Documentation/filesystems/pohmelfs/network_protocol.txt
+++ b/Documentation/filesystems/pohmelfs/network_protocol.txt
@@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command
 so one can extend protocol as needed without breaking backward compatibility as long
 as old commands are supported. All string lengths include tail 0 byte.
 
-All commans are transfered over the network in big-endian. CPU endianess is used at the end peers.
+All commands are transferred over the network in big-endian. CPU endianess is used at the end peers.
 
 @cmd - command number, which specifies command to be processed. Following
 	commands are used currently:
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 23cae6548d3..60740e8ecb3 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -543,7 +543,7 @@ just those considered 'most important'.  The new vectors are:
   their statistics are used by kernel developers and interested users to
   determine the occurrence of interrupts of the given type.
 
-The above IRQ vectors are displayed only when relevent.  For example,
+The above IRQ vectors are displayed only when relevant.  For example,
 the threshold vector does not exist on x86_64 platforms.  Others are
 suppressed when the system is a uniprocessor.  As of this writing, only
 i386 and x86_64 platforms support the new IRQ vector displays.
@@ -836,7 +836,6 @@ Provides counts of softirq handlers serviced since boot time, for each cpu.
  TASKLET:          0          0          0        290
    SCHED:      27035      26983      26971      26746
  HRTIMER:          0          0          0          0
-     RCU:       1678       1769       2178       2250
 
 
 1.3 IDE devices in /proc/ide
@@ -1202,7 +1201,7 @@ The columns are:
                        W = can do write operations
                        U = can do unblank
   flags                E = it is enabled
-                       C = it is prefered console
+                       C = it is preferred console
                        B = it is primary boot console
                        p = it is used for printk buffer
                        b = it is not a TTY but a Braille device
@@ -1331,7 +1330,7 @@ NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see
 Documentation/feature-removal-schedule.txt.
 
 Caveat: when a parent task is selected, the oom killer will sacrifice any first
-generation children with seperate address spaces instead, if possible.  This
+generation children with separate address spaces instead, if possible.  This
 avoids servers and important system daemons from being killed and loses the
 minimal amount of work.
 
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 2d78f191184..d4d41465a0b 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -219,7 +219,7 @@ or if it is stored out of line (in which case the value field stores a
 reference to where the actual value is stored).  This allows large values
 to be stored out of line improving scanning and lookup performance and it
 also allows values to be de-duplicated, the value being stored once, and
-all other occurences holding an out of line reference to that value.
+all other occurrences holding an out of line reference to that value.
 
 The xattr lists are packed into compressed 8K metadata blocks.
 To reduce overhead in inodes, rather than storing the on-disk
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index f806e50aaa6..597f728e7b4 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -62,7 +62,7 @@ values of the same type.
 
 Mixing types, expressing multiple lines of data, and doing fancy
 formatting of data is heavily frowned upon. Doing these things may get
-you publically humiliated and your code rewritten without notice. 
+you publicly humiliated and your code rewritten without notice. 
 
 
 An attribute definition is simply:
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 80815ed654c..21a7dc467bb 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -97,7 +97,7 @@ functions:
 The passed struct file_system_type describes your filesystem. When a
 request is made to mount a filesystem onto a directory in your namespace,
 the VFS will call the appropriate mount() method for the specific
-filesystem.  New vfsmount refering to the tree returned by ->mount()
+filesystem.  New vfsmount referring to the tree returned by ->mount()
 will be attached to the mountpoint, so that when pathname resolution
 reaches the mountpoint it will jump into the root of that vfsmount.
 
diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt
index 5282e3e5141..2ce36439c09 100644
--- a/Documentation/filesystems/xfs-delayed-logging-design.txt
+++ b/Documentation/filesystems/xfs-delayed-logging-design.txt
@@ -42,7 +42,7 @@ the aggregation of all the previous changes currently held only in the log.
 This relogging technique also allows objects to be moved forward in the log so
 that an object being relogged does not prevent the tail of the log from ever
 moving forward.  This can be seen in the table above by the changing
-(increasing) LSN of each subsquent transaction - the LSN is effectively a
+(increasing) LSN of each subsequent transaction - the LSN is effectively a
 direct encoding of the location in the log of the transaction.
 
 This relogging is also used to implement long-running, multiple-commit
@@ -338,7 +338,7 @@ the same time another transaction modifies the item and inserts the log item
 into the new CIL, then checkpoint transaction commit code cannot use log items
 to store the list of log vectors that need to be written into the transaction.
 Hence log vectors need to be able to be chained together to allow them to be
-detatched from the log items. That is, when the CIL is flushed the memory
+detached from the log items. That is, when the CIL is flushed the memory
 buffer and log vector attached to each log item needs to be attached to the
 checkpoint context so that the log item can be released. In diagrammatic form,
 the CIL would look like this before the flush:
@@ -577,7 +577,7 @@ only becomes unpinned when all the transactions complete and there are no
 pending transactions. Thus the pinning and unpinning of a log item is symmetric
 as there is a 1:1 relationship with transaction commit and log item completion.
 
-For delayed logging, however, we have an assymetric transaction commit to
+For delayed logging, however, we have an asymmetric transaction commit to
 completion relationship. Every time an object is relogged in the CIL it goes
 through the commit process without a corresponding completion being registered.
 That is, we now have a many-to-one relationship between transaction commit and
@@ -780,7 +780,7 @@ With delayed logging, there are new steps inserted into the life cycle:
 From this, it can be seen that the only life cycle differences between the two
 logging methods are in the middle of the life cycle - they still have the same
 beginning and end and execution constraints. The only differences are in the
-commiting of the log items to the log itself and the completion processing.
+committing of the log items to the log itself and the completion processing.
 Hence delayed logging should not introduce any constraints on log item
 behaviour, allocation or freeing that don't already exist.
 
diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt
index cb8a3a00cc9..df904aec990 100644
--- a/Documentation/flexible-arrays.txt
+++ b/Documentation/flexible-arrays.txt
@@ -66,10 +66,10 @@ trick is to ensure that any needed memory allocations are done before
 entering atomic context, using:
 
     int flex_array_prealloc(struct flex_array *array, unsigned int start,
-			    unsigned int end, gfp_t flags);
+			    unsigned int nr_elements, gfp_t flags);
 
 This function will ensure that memory for the elements indexed in the range
-defined by start and end has been allocated.  Thereafter, a
+defined by start and nr_elements has been allocated.  Thereafter, a
 flex_array_put() call on an element in that range is guaranteed not to
 block.
 
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 5eb3b9d5f0d..915f32063a2 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -78,7 +78,7 @@ motherboards (most modern Abit motherboards).
 
 The first and second revision of the uGuru chip in reality is a Winbond
 W83L950D in disguise (despite Abit claiming it is "a new microprocessor
-designed by the ABIT Engineers"). Unfortunatly this doesn't help since the
+designed by the ABIT Engineers"). Unfortunately this doesn't help since the
 W83L950D is a generic microcontroller with a custom Abit application running
 on it.
 
diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet
index d9251efdcec..8d2be8a0b1e 100644
--- a/Documentation/hwmon/abituguru-datasheet
+++ b/Documentation/hwmon/abituguru-datasheet
@@ -5,9 +5,9 @@ First of all, what I know about uGuru is no fact based on any help, hints or
 datasheet from Abit. The data I have got on uGuru have I assembled through
 my weak knowledge in "backwards engineering".
 And just for the record, you may have noticed uGuru isn't a chip developed by
-Abit, as they claim it to be. It's realy just an microprocessor (uC) created by
+Abit, as they claim it to be. It's really just an microprocessor (uC) created by
 Winbond (W83L950D). And no, reading the manual for this specific uC or
-mailing  Windbond for help won't give any usefull data about uGuru, as it is
+mailing  Windbond for help won't give any useful data about uGuru, as it is
 the program inside the uC that is responding to calls.
 
 Olle Sandberg <ollebull@gmail.com>, 2005-05-25
@@ -41,7 +41,7 @@ later on attached again data-port will hold 0x08, more about this later.
 
 After wider testing of the Linux kernel driver some variants of the uGuru have
 turned up which will hold 0x00 instead of 0xAC at the CMD port, thus we also
-have to test CMD for two different values. On these uGuru's DATA will initally
+have to test CMD for two different values. On these uGuru's DATA will initially
 hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read
 first!
 
@@ -308,5 +308,5 @@ the voltage / clock programming out, I tried reading and only reading banks
 resulted in a _permanent_ reprogramming of the voltages, luckily I had the
 sensors part configured so that it would shutdown my system on any out of spec
 voltages which proprably safed my computer (after a reboot I managed to
-immediatly enter the bios and reload the defaults). This probably means that
+immediately enter the bios and reload the defaults). This probably means that
 the read/write cycle for the non sensor part is different from the sensor part.
diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3
index fa598aac22f..a6ccfe4bb6a 100644
--- a/Documentation/hwmon/abituguru3
+++ b/Documentation/hwmon/abituguru3
@@ -47,7 +47,7 @@ This driver supports the hardware monitoring features of the third revision of
 the Abit uGuru chip, found on recent Abit uGuru featuring motherboards.
 
 The 3rd revision of the uGuru chip in reality is a Winbond W83L951G.
-Unfortunatly this doesn't help since the W83L951G is a generic microcontroller
+Unfortunately this doesn't help since the W83L951G is a generic microcontroller
 with a custom Abit application running on it.
 
 Despite Abit not releasing any information regarding the uGuru revision 3,
diff --git a/Documentation/hwmon/adm1021 b/Documentation/hwmon/adm1021
index 03d02bfb3df..02ad96cf9b2 100644
--- a/Documentation/hwmon/adm1021
+++ b/Documentation/hwmon/adm1021
@@ -14,10 +14,6 @@ Supported chips:
     Prefix: 'gl523sm'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
     Datasheet:
-  * Intel Xeon Processor
-    Prefix: - any other - may require 'force_adm1021' parameter
-    Addresses scanned: none
-    Datasheet: Publicly available at Intel website
   * Maxim MAX1617
     Prefix: 'max1617'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
@@ -91,21 +87,27 @@ will do no harm, but will return 'old' values. It is possible to make
 ADM1021-clones do faster measurements, but there is really no good reason
 for that.
 
-Xeon support
-------------
 
-Some Xeon processors have real max1617, adm1021, or compatible chips
-within them, with two temperature sensors.
+Netburst-based Xeon support
+---------------------------
 
-Other Xeons have chips with only one sensor.
+Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to
+2003) microarchitecture had real MAX1617, ADM1021, or compatible chips
+within them, with two temperature sensors. Other Xeon processors of this
+era (with 400 MHz FSB) had chips with only one temperature sensor.
 
-If you have a Xeon, and the adm1021 module loads, and both temperatures
-appear valid, then things are good.
+If you have such an old Xeon, and you get two valid temperatures when
+loading the adm1021 module, then things are good.
 
-If the adm1021 module doesn't load, you should try this:
-	modprobe adm1021 force_adm1021=BUS,ADDRESS
-	ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e.
+If nothing happens when loading the adm1021 module, and you are certain
+that your specific Xeon processor model includes compatible sensors, you
+will have to explicitly instantiate the sensor chips from user-space. See
+method 4 in Documentation/i2c/instantiating-devices. Possible slave
+addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that
+only temp2 will be correct and temp1 will have to be ignored.
 
-If you have dual Xeons you may have appear to have two separate
-adm1021-compatible chips, or two single-temperature sensors, at distinct
-addresses.
+Previous generations of the Xeon processor (based on Pentium II/III)
+didn't have these sensors. Next generations of Xeon processors (533 MHz
+FSB and faster) lost them, until the Core-based generation which
+introduced integrated digital thermal sensors. These are supported by
+the coretemp driver.
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index fa475c0a48a..f3efd18e87f 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -32,6 +32,16 @@ Supported chips:
     Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the ON Semiconductor website
                http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461
+  * Analog Devices ADT7461A
+    Prefix: 'adt7461a'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: Publicly available at the ON Semiconductor website
+               http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
+  * ON Semiconductor NCT1008
+    Prefix: 'nct1008'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: Publicly available at the ON Semiconductor website
+               http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
   * Maxim MAX6646
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4d
@@ -149,7 +159,7 @@ ADM1032:
   * ALERT is triggered by open remote sensor.
   * SMBus PEC support for Write Byte and Receive Byte transactions.
 
-ADT7461:
+ADT7461, ADT7461A, NCT1008:
   * Extended temperature range (breaks compatibility)
   * Lower resolution for remote temperature
 
@@ -195,9 +205,9 @@ are exported, one for each channel, but these values are of course linked.
 Only the local hysteresis can be set from user-space, and the same delta
 applies to the remote hysteresis.
 
-The lm90 driver will not update its values more frequently than every
-other second; reading them more often will do no harm, but will return
-'old' values.
+The lm90 driver will not update its values more frequently than configured with
+the update_interval attribute; reading them more often will do no harm, but will
+return 'old' values.
 
 SMBus Alert Support
 -------------------
@@ -205,11 +215,12 @@ SMBus Alert Support
 This driver has basic support for SMBus alert. When an alert is received,
 the status register is read and the faulty temperature channel is logged.
 
-The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus
-alert protocol properly so additional care is needed: the ALERT output is
-disabled when an alert is received, and is re-enabled only when the alarm
-is gone. Otherwise the chip would block alerts from other chips in the bus
-as long as the alarm is active.
+The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
+Semiconductor chips (NCT1008) do not implement the SMBus alert protocol
+properly so additional care is needed: the ALERT output is disabled when
+an alert is received, and is re-enabled only when the alarm is gone.
+Otherwise the chip would block alerts from other chips in the bus as long
+as the alarm is active.
 
 PEC Support
 -----------
diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064
new file mode 100644
index 00000000000..41728999e14
--- /dev/null
+++ b/Documentation/hwmon/max16064
@@ -0,0 +1,62 @@
+Kernel driver max16064
+======================
+
+Supported chips:
+  * Maxim MAX16064
+    Prefix: 'max16064'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply
+Controller with Active-Voltage Output Control and PMBus Interface.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-4]_label		"vout[1-4]"
+in[1-4]_input		Measured voltage. From READ_VOUT register.
+in[1-4]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-4]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-4]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-4]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-4]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-4]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-4]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-4]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+temp1_input		Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm		Chip temperature high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+			status is set.
+temp1_crit_alarm	Chip temperature critical high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+			status is set.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
new file mode 100644
index 00000000000..6c525dd07d5
--- /dev/null
+++ b/Documentation/hwmon/max34440
@@ -0,0 +1,79 @@
+Kernel driver max34440
+======================
+
+Supported chips:
+  * Maxim MAX34440
+    Prefixes: 'max34440'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
+  * Maxim MAX34441
+    PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
+    Prefixes: 'max34441'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
+Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager
+and Intelligent Fan Controller.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-6]_label		"vout[1-6]".
+in[1-6]_input		Measured voltage. From READ_VOUT register.
+in[1-6]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-6]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-6]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-6]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-6]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-6]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-6]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-6]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr[1-6]_label		"iout[1-6]".
+curr[1-6]_input		Measured current. From READ_IOUT register.
+curr[1-6]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[1-6]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr[1-6]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
+curr[1-6]_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+
+			in6 and curr6 attributes only exist for MAX34440.
+
+temp[1-8]_input		Measured temperatures. From READ_TEMPERATURE_1 register.
+			temp1 is the chip's internal temperature. temp2..temp5
+			are remote I2C temperature sensors. For MAX34441, temp6
+			is a remote thermal-diode sensor. For MAX34440, temp6..8
+			are remote I2C temperature sensors.
+temp[1-8]_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-8]_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-8]_max_alarm	Temperature high alarm.
+temp[1-8]_crit_alarm	Temperature critical high alarm.
+
+			temp7 and temp8 attributes only exist for MAX34440.
diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688
new file mode 100644
index 00000000000..0ddd3a41203
--- /dev/null
+++ b/Documentation/hwmon/max8688
@@ -0,0 +1,69 @@
+Kernel driver max8688
+=====================
+
+Supported chips:
+  * Maxim MAX8688
+    Prefix: 'max8688'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply
+Controller/Monitor with PMBus Interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label		"vout1"
+in1_input		Measured voltage. From READ_VOUT register.
+in1_min			Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_max			Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in1_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in1_min_alarm		Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in1_max_alarm		Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in1_lcrit_alarm		Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in1_crit_alarm		Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr1_label		"iout1"
+curr1_input		Measured current. From READ_IOUT register.
+curr1_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr1_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr1_max_alarm		Current high alarm. From IOUT_OC_WARN_LIMIT register.
+curr1_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+
+temp1_input		Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm		Chip temperature high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+			status is set.
+temp1_crit_alarm	Chip temperature critical high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+			status is set.
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index f2d42e8bdf4..5e462fc7f99 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -13,26 +13,6 @@ Supported chips:
     Prefix: 'ltc2978'
     Addresses scanned: -
     Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
-  * Maxim MAX16064
-    Quad Power-Supply Controller
-    Prefix: 'max16064'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
-  * Maxim MAX34440
-    PMBus 6-Channel Power-Supply Manager
-    Prefixes: 'max34440'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
-  * Maxim MAX34441
-    PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
-    Prefixes: 'max34441'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
-  * Maxim MAX8688
-    Digital Power-Supply Controller/Monitor
-    Prefix: 'max8688'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
   * Generic PMBus devices
     Prefix: 'pmbus'
     Addresses scanned: -
@@ -150,11 +130,11 @@ The following attributes are supported. Limits are read-write; all other
 attributes are read-only.
 
 inX_input		Measured voltage. From READ_VIN or READ_VOUT register.
-inX_min			Minumum Voltage.
+inX_min			Minimum Voltage.
 			From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
 inX_max			Maximum voltage.
 			From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register.
-inX_lcrit		Critical minumum Voltage.
+inX_lcrit		Critical minimum Voltage.
 			From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register.
 inX_crit		Critical maximum voltage.
 			From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register.
@@ -169,17 +149,19 @@ inX_label		"vin", "vcap", or "voutY"
 currX_input		Measured current. From READ_IIN or READ_IOUT register.
 currX_max		Maximum current.
 			From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register.
-currX_lcrit		Critical minumum output current.
+currX_lcrit		Critical minimum output current.
 			From IOUT_UC_FAULT_LIMIT register.
 currX_crit		Critical maximum current.
 			From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
 currX_alarm		Current high alarm.
 			From IIN_OC_WARNING or IOUT_OC_WARNING status.
+currX_max_alarm		Current high alarm.
+			From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
 currX_lcrit_alarm	Output current critical low alarm.
 			From IOUT_UC_FAULT status.
 currX_crit_alarm	Current critical high alarm.
 			From IIN_OC_FAULT or IOUT_OC_FAULT status.
-currX_label		"iin" or "vinY"
+currX_label		"iin" or "ioutY"
 
 powerX_input		Measured power. From READ_PIN or READ_POUT register.
 powerX_cap		Output power cap. From POUT_MAX register.
@@ -193,13 +175,13 @@ powerX_crit_alarm	Output power critical high alarm.
 			From POUT_OP_FAULT status.
 powerX_label		"pin" or "poutY"
 
-tempX_input		Measured tempererature.
+tempX_input		Measured temperature.
 			From READ_TEMPERATURE_X register.
-tempX_min		Mimimum tempererature. From UT_WARN_LIMIT register.
-tempX_max		Maximum tempererature. From OT_WARN_LIMIT register.
-tempX_lcrit		Critical low tempererature.
+tempX_min		Mimimum temperature. From UT_WARN_LIMIT register.
+tempX_max		Maximum temperature. From OT_WARN_LIMIT register.
+tempX_lcrit		Critical low temperature.
 			From UT_FAULT_LIMIT register.
-tempX_crit		Critical high tempererature.
+tempX_crit		Critical high temperature.
 			From OT_FAULT_LIMIT register.
 tempX_min_alarm		Chip temperature low alarm. Set by comparing
 			READ_TEMPERATURE_X with UT_WARN_LIMIT if
diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665
index 3820fc9ca52..59e31614054 100644
--- a/Documentation/hwmon/smm665
+++ b/Documentation/hwmon/smm665
@@ -150,8 +150,8 @@ in8_crit_alarm		Channel F critical alarm
 in9_crit_alarm		AIN1 critical alarm
 in10_crit_alarm		AIN2 critical alarm
 
-temp1_input		Chip tempererature
-temp1_min		Mimimum chip tempererature
-temp1_max		Maximum chip tempererature
-temp1_crit		Critical chip tempererature
+temp1_input		Chip temperature
+temp1_min		Mimimum chip temperature
+temp1_max		Maximum chip temperature
+temp1_crit		Critical chip temperature
 temp1_crit_alarm	Temperature critical alarm
diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches
new file mode 100644
index 00000000000..86f42e8e9e4
--- /dev/null
+++ b/Documentation/hwmon/submitting-patches
@@ -0,0 +1,109 @@
+	How to Get Your Patch Accepted Into the Hwmon Subsystem
+	-------------------------------------------------------
+
+This text is is a collection of suggestions for people writing patches or
+drivers for the hwmon subsystem. Following these suggestions will greatly
+increase the chances of your change being accepted.
+
+
+1. General
+----------
+
+* It should be unnecessary to mention, but please read and follow
+    Documentation/SubmitChecklist
+    Documentation/SubmittingDrivers
+    Documentation/SubmittingPatches
+    Documentation/CodingStyle
+
+* If your patch generates checkpatch warnings, please refrain from explanations
+  such as "I don't like that coding style". Keep in mind that each unnecessary
+  warning helps hiding a real problem. If you don't like the kernel coding
+  style, don't write kernel drivers.
+
+* Please test your patch thoroughly. We are not your test group.
+  Sometimes a patch can not or not completely be tested because of missing
+  hardware. In such cases, you should test-build the code on at least one
+  architecture. If run-time testing was not achieved, it should be written
+  explicitly below the patch header.
+
+* If your patch (or the driver) is affected by configuration options such as
+  CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration
+  variants.
+
+
+2. Adding functionality to existing drivers
+-------------------------------------------
+
+* Make sure the documentation in Documentation/hwmon/<driver_name> is up to
+  date.
+
+* Make sure the information in Kconfig is up to date.
+
+* If the added functionality requires some cleanup or structural changes, split
+  your patch into a cleanup part and the actual addition. This makes it easier
+  to review your changes, and to bisect any resulting problems.
+
+* Never mix bug fixes, cleanup, and functional enhancements in a single patch.
+
+
+3. New drivers
+--------------
+
+* Running your patch or driver file(s) through checkpatch does not mean its
+  formatting is clean. If unsure about formatting in your new driver, run it
+  through Lindent. Lindent is not perfect, and you may have to do some minor
+  cleanup, but it is a good start.
+
+* Consider adding yourself to MAINTAINERS.
+
+* Document the driver in Documentation/hwmon/<driver_name>.
+
+* Add the driver to Kconfig and Makefile in alphabetical order.
+
+* Make sure that all dependencies are listed in Kconfig. For new drivers, it
+  is most likely prudent to add a dependency on EXPERIMENTAL.
+
+* Avoid forward declarations if you can. Rearrange the code if necessary.
+
+* Avoid calculations in macros and macro-generated functions. While such macros
+  may save a line or so in the source, it obfuscates the code and makes code
+  review more difficult. It may also result in code which is more complicated
+  than necessary. Use inline functions or just regular functions instead.
+
+* If the driver has a detect function, make sure it is silent. Debug messages
+  and messages printed after a successful detection are acceptable, but it
+  must not print messages such as "Chip XXX not found/supported".
+
+  Keep in mind that the detect function will run for all drivers supporting an
+  address if a chip is detected on that address. Unnecessary messages will just
+  pollute the kernel log and not provide any value.
+
+* Provide a detect function if and only if a chip can be detected reliably.
+
+* Avoid writing to chip registers in the detect function. If you have to write,
+  only do it after you have already gathered enough data to be certain that the
+  detection is going to be successful.
+
+  Keep in mind that the chip might not be what your driver believes it is, and
+  writing to it might cause a bad misconfiguration.
+
+* Make sure there are no race conditions in the probe function. Specifically,
+  completely initialize your chip first, then create sysfs entries and register
+  with the hwmon subsystem.
+
+* Do not provide support for deprecated sysfs attributes.
+
+* Do not create non-standard attributes unless really needed. If you have to use
+  non-standard attributes, or you believe you do, discuss it on the mailing list
+  first. Either case, provide a detailed explanation why you need the
+  non-standard attribute(s).
+  Standard attributes are specified in Documentation/hwmon/sysfs-interface.
+
+* When deciding which sysfs attributes to support, look at the chip's
+  capabilities. While we do not expect your driver to support everything the
+  chip may offer, it should at least support all limits and alarms.
+
+* Last but not least, please check if a driver for your chip already exists
+  before starting to write a new driver. Especially for temperature sensors,
+  new chips are often variants of previously released chips. In some cases,
+  a presumably new chip may simply have been relabeled.
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 83a698773ad..8f63c244f1a 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -579,7 +579,7 @@ channel should not be trusted.
 fan[1-*]_fault
 temp[1-*]_fault
 		Input fault condition
-		0: no fault occured
+		0: no fault occurred
 		1: fault condition
 		RO
 
diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d
index ecbc1e4574b..129b0a3b555 100644
--- a/Documentation/hwmon/w83781d
+++ b/Documentation/hwmon/w83781d
@@ -403,7 +403,7 @@ found out the following values do work as a form of coarse pwm:
 
 0x80 - seems to turn fans off after some time(1-2 minutes)... might be
 some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an
-old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attemp at Qfan
+old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan
 that was dropped at the BIOS)
 0x81 - off
 0x82 - slightly "on-ner" than off, but my fans do not get to move. I can
diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d
index 5663e491655..90387c3540f 100644
--- a/Documentation/hwmon/w83791d
+++ b/Documentation/hwmon/w83791d
@@ -93,7 +93,7 @@ The sysfs interface to the beep bitmask has migrated from the original legacy
 method of a single sysfs beep_mask file to a newer method using multiple
 *_beep files as described in .../Documentation/hwmon/sysfs-interface.
 
-A similar change has occured for the bitmap corresponding to the alarms. The
+A similar change has occurred for the bitmap corresponding to the alarms. The
 original legacy method used a single sysfs alarms file containing a bitmap
 of triggered alarms. The newer method uses multiple sysfs *_alarm files
 (again following the pattern described in sysfs-interface).
diff --git a/Documentation/i2c/busses/i2c-parport-light b/Documentation/i2c/busses/i2c-parport-light
index bdc9cbb2e0f..c22ee063e1e 100644
--- a/Documentation/i2c/busses/i2c-parport-light
+++ b/Documentation/i2c/busses/i2c-parport-light
@@ -4,7 +4,7 @@ Author: Jean Delvare <khali@linux-fr.org>
 
 This driver is a light version of i2c-parport. It doesn't depend        
 on the parport driver, and uses direct I/O access instead. This might be
-prefered on embedded systems where wasting memory for the clean but heavy
+preferred on embedded systems where wasting memory for the clean but heavy
 parport handling is not an option. The drawback is a reduced portability
 and the impossibility to daisy-chain other parallel port devices.                 
   
diff --git a/Documentation/i2c/busses/i2c-sis96x b/Documentation/i2c/busses/i2c-sis96x
index 70e6a0cc1e1..0b979f3252a 100644
--- a/Documentation/i2c/busses/i2c-sis96x
+++ b/Documentation/i2c/busses/i2c-sis96x
@@ -35,7 +35,7 @@ or perhaps this...
 
 (kernel versions later than 2.4.18 may fill in the "Unknown"s)
 
-If you cant see it please look on quirk_sis_96x_smbus
+If you can't see it please look on quirk_sis_96x_smbus
 (drivers/pci/quirks.c) (also if southbridge detection fails)
 
 I suspect that this driver could be made to work for the following SiS
diff --git a/Documentation/i2c/busses/i2c-taos-evm b/Documentation/i2c/busses/i2c-taos-evm
index 9146e33be6d..63f62bcbf59 100644
--- a/Documentation/i2c/busses/i2c-taos-evm
+++ b/Documentation/i2c/busses/i2c-taos-evm
@@ -13,7 +13,7 @@ Currently supported devices are:
 
 * TAOS TSL2550 EVM
 
-For addtional information on TAOS products, please see
+For additional information on TAOS products, please see
   http://www.taosinc.com/
 
 
diff --git a/Documentation/i2o/README b/Documentation/i2o/README
index 0ebf58c73f5..ee91e2626ff 100644
--- a/Documentation/i2o/README
+++ b/Documentation/i2o/README
@@ -53,7 +53,7 @@ Symbios Logic (Now LSI)
 BoxHill Corporation
 	Loan of initial FibreChannel disk array used for development work.
 
-European Comission
+European Commission
 	Funding the work done by the University of Helsinki
 
 SysKonnect
diff --git a/Documentation/ia64/aliasing-test.c b/Documentation/ia64/aliasing-test.c
index 3dfb76ca693..5caa2af3320 100644
--- a/Documentation/ia64/aliasing-test.c
+++ b/Documentation/ia64/aliasing-test.c
@@ -177,7 +177,7 @@ static int scan_rom(char *path, char *file)
 
 			/*
 			 * It's OK if the ROM is unreadable.  Maybe there
-			 * is no ROM, or some other error ocurred.  The
+			 * is no ROM, or some other error occurred.  The
 			 * important thing is that no MCA happened.
 			 */
 			if (rc > 0)
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
new file mode 100644
index 00000000000..23fcb05175b
--- /dev/null
+++ b/Documentation/input/event-codes.txt
@@ -0,0 +1,262 @@
+The input protocol uses a map of types and codes to express input device values
+to userspace. This document describes the types and codes and how and when they
+may be used.
+
+A single hardware event generates multiple input events. Each input event
+contains the new value of a single data item. A special event type, EV_SYN, is
+used to separate input events into packets of input data changes occurring at
+the same moment in time. In the following, the term "event" refers to a single
+input event encompassing a type, code, and value.
+
+The input protocol is a stateful protocol. Events are emitted only when values
+of event codes have changed. However, the state is maintained within the Linux
+input subsystem; drivers do not need to maintain the state and may attempt to
+emit unchanged values without harm. Userspace may obtain the current state of
+event code values using the EVIOCG* ioctls defined in linux/input.h. The event
+reports supported by a device are also provided by sysfs in
+class/input/event*/device/capabilities/, and the properties of a device are
+provided in class/input/event*/device/properties.
+
+Types:
+==========
+Types are groupings of codes under a logical input construct. Each type has a
+set of applicable codes to be used in generating events. See the Codes section
+for details on valid codes for each type.
+
+* EV_SYN:
+  - Used as markers to separate events. Events may be separated in time or in
+    space, such as with the multitouch protocol.
+
+* EV_KEY:
+  - Used to describe state changes of keyboards, buttons, or other key-like
+    devices.
+
+* EV_REL:
+  - Used to describe relative axis value changes, e.g. moving the mouse 5 units
+    to the left.
+
+* EV_ABS:
+  - Used to describe absolute axis value changes, e.g. describing the
+    coordinates of a touch on a touchscreen.
+
+* EV_MSC:
+  - Used to describe miscellaneous input data that do not fit into other types.
+
+* EV_SW:
+  - Used to describe binary state input switches.
+
+* EV_LED:
+  - Used to turn LEDs on devices on and off.
+
+* EV_SND:
+  - Used to output sound to devices.
+
+* EV_REP:
+  - Used for autorepeating devices.
+
+* EV_FF:
+  - Used to send force feedback commands to an input device.
+
+* EV_PWR:
+  - A special type for power button and switch input.
+
+* EV_FF_STATUS:
+  - Used to receive force feedback device status.
+
+Codes:
+==========
+Codes define the precise type of event.
+
+EV_SYN:
+----------
+EV_SYN event values are undefined. Their usage is defined only by when they are
+sent in the evdev event stream.
+
+* SYN_REPORT:
+  - Used to synchronize and separate events into packets of input data changes
+    occurring at the same moment in time. For example, motion of a mouse may set
+    the REL_X and REL_Y values for one motion, then emit a SYN_REPORT. The next
+    motion will emit more REL_X and REL_Y values and send another SYN_REPORT.
+
+* SYN_CONFIG:
+  - TBD
+
+* SYN_MT_REPORT:
+  - Used to synchronize and separate touch events. See the
+    multi-touch-protocol.txt document for more information.
+
+* SYN_DROPPED:
+  - Used to indicate buffer overrun in the evdev client's event queue.
+    Client should ignore all events up to and including next SYN_REPORT
+    event and query the device (using EVIOCG* ioctls) to obtain its
+    current state.
+
+EV_KEY:
+----------
+EV_KEY events take the form KEY_<name> or BTN_<name>. For example, KEY_A is used
+to represent the 'A' key on a keyboard. When a key is depressed, an event with
+the key's code is emitted with value 1. When the key is released, an event is
+emitted with value 0. Some hardware send events when a key is repeated. These
+events have a value of 2. In general, KEY_<name> is used for keyboard keys, and
+BTN_<name> is used for other types of momentary switch events.
+
+A few EV_KEY codes have special meanings:
+
+* BTN_TOOL_<name>:
+  - These codes are used in conjunction with input trackpads, tablets, and
+    touchscreens. These devices may be used with fingers, pens, or other tools.
+    When an event occurs and a tool is used, the corresponding BTN_TOOL_<name>
+    code should be set to a value of 1. When the tool is no longer interacting
+    with the input device, the BTN_TOOL_<name> code should be reset to 0. All
+    trackpads, tablets, and touchscreens should use at least one BTN_TOOL_<name>
+    code when events are generated.
+
+* BTN_TOUCH:
+    BTN_TOUCH is used for touch contact. While an input tool is determined to be
+    within meaningful physical contact, the value of this property must be set
+    to 1. Meaningful physical contact may mean any contact, or it may mean
+    contact conditioned by an implementation defined property. For example, a
+    touchpad may set the value to 1 only when the touch pressure rises above a
+    certain value. BTN_TOUCH may be combined with BTN_TOOL_<name> codes. For
+    example, a pen tablet may set BTN_TOOL_PEN to 1 and BTN_TOUCH to 0 while the
+    pen is hovering over but not touching the tablet surface.
+
+Note: For appropriate function of the legacy mousedev emulation driver,
+BTN_TOUCH must be the first evdev code emitted in a synchronization frame.
+
+Note: Historically a touch device with BTN_TOOL_FINGER and BTN_TOUCH was
+interpreted as a touchpad by userspace, while a similar device without
+BTN_TOOL_FINGER was interpreted as a touchscreen. For backwards compatibility
+with current userspace it is recommended to follow this distinction. In the
+future, this distinction will be deprecated and the device properties ioctl
+EVIOCGPROP, defined in linux/input.h, will be used to convey the device type.
+
+* BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP, BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP:
+  - These codes denote one, two, three, and four finger interaction on a
+    trackpad or touchscreen. For example, if the user uses two fingers and moves
+    them on the touchpad in an effort to scroll content on screen,
+    BTN_TOOL_DOUBLETAP should be set to value 1 for the duration of the motion.
+    Note that all BTN_TOOL_<name> codes and the BTN_TOUCH code are orthogonal in
+    purpose. A trackpad event generated by finger touches should generate events
+    for one code from each group. At most only one of these BTN_TOOL_<name>
+    codes should have a value of 1 during any synchronization frame.
+
+Note: Historically some drivers emitted multiple of the finger count codes with
+a value of 1 in the same synchronization frame. This usage is deprecated.
+
+Note: In multitouch drivers, the input_mt_report_finger_count() function should
+be used to emit these codes. Please see multi-touch-protocol.txt for details.
+
+EV_REL:
+----------
+EV_REL events describe relative changes in a property. For example, a mouse may
+move to the left by a certain number of units, but its absolute position in
+space is unknown. If the absolute position is known, EV_ABS codes should be used
+instead of EV_REL codes.
+
+A few EV_REL codes have special meanings:
+
+* REL_WHEEL, REL_HWHEEL:
+  - These codes are used for vertical and horizontal scroll wheels,
+    respectively.
+
+EV_ABS:
+----------
+EV_ABS events describe absolute changes in a property. For example, a touchpad
+may emit coordinates for a touch location.
+
+A few EV_ABS codes have special meanings:
+
+* ABS_DISTANCE:
+  - Used to describe the distance of a tool from an interaction surface. This
+    event should only be emitted while the tool is hovering, meaning in close
+    proximity of the device and while the value of the BTN_TOUCH code is 0. If
+    the input device may be used freely in three dimensions, consider ABS_Z
+    instead.
+
+* ABS_MT_<name>:
+  - Used to describe multitouch input events. Please see
+    multi-touch-protocol.txt for details.
+
+EV_SW:
+----------
+EV_SW events describe stateful binary switches. For example, the SW_LID code is
+used to denote when a laptop lid is closed.
+
+Upon binding to a device or resuming from suspend, a driver must report
+the current switch state. This ensures that the device, kernel, and userspace
+state is in sync.
+
+Upon resume, if the switch state is the same as before suspend, then the input
+subsystem will filter out the duplicate switch state reports. The driver does
+not need to keep the state of the switch at any time.
+
+EV_MSC:
+----------
+EV_MSC events are used for input and output events that do not fall under other
+categories.
+
+EV_LED:
+----------
+EV_LED events are used for input and output to set and query the state of
+various LEDs on devices.
+
+EV_REP:
+----------
+EV_REP events are used for specifying autorepeating events.
+
+EV_SND:
+----------
+EV_SND events are used for sending sound commands to simple sound output
+devices.
+
+EV_FF:
+----------
+EV_FF events are used to initialize a force feedback capable device and to cause
+such device to feedback.
+
+EV_PWR:
+----------
+EV_PWR events are a special type of event used specifically for power
+mangement. Its usage is not well defined. To be addressed later.
+
+Guidelines:
+==========
+The guidelines below ensure proper single-touch and multi-finger functionality.
+For multi-touch functionality, see the multi-touch-protocol.txt document for
+more information.
+
+Mice:
+----------
+REL_{X,Y} must be reported when the mouse moves. BTN_LEFT must be used to report
+the primary button press. BTN_{MIDDLE,RIGHT,4,5,etc.} should be used to report
+further buttons of the device. REL_WHEEL and REL_HWHEEL should be used to report
+scroll wheel events where available.
+
+Touchscreens:
+----------
+ABS_{X,Y} must be reported with the location of the touch. BTN_TOUCH must be
+used to report when a touch is active on the screen.
+BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
+contact. BTN_TOOL_<name> events should be reported where possible.
+
+Trackpads:
+----------
+Legacy trackpads that only provide relative position information must report
+events like mice described above.
+
+Trackpads that provide absolute touch position must report ABS_{X,Y} for the
+location of the touch. BTN_TOUCH should be used to report when a touch is active
+on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should
+be used to report the number of touches active on the trackpad.
+
+Tablets:
+----------
+BTN_TOOL_<name> events must be reported when a stylus or other tool is active on
+the tablet. ABS_{X,Y} must be reported with the location of the tool. BTN_TOUCH
+should be used to report when the tool is in contact with the tablet.
+BTN_{STYLUS,STYLUS2} should be used to report buttons on the tool itself. Any
+button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}.
+BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
+meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
+purpose on the device.
diff --git a/Documentation/input/joystick-parport.txt b/Documentation/input/joystick-parport.txt
index 1c856f32ff2..56870c70a79 100644
--- a/Documentation/input/joystick-parport.txt
+++ b/Documentation/input/joystick-parport.txt
@@ -272,7 +272,7 @@ if you want to use gamecon.c.
 
   Also, the connection is a bit more complex. You'll need a bunch of diodes,
 and one pullup resistor. First, you connect the Directions and the button
-the same as for db9, however with the diodes inbetween.
+the same as for db9, however with the diodes between.
 
 	    Diodes
 (pin 2) -----|<|----> Up
diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
index 8b4129de1d2..943e8f6f2b1 100644
--- a/Documentation/input/rotary-encoder.txt
+++ b/Documentation/input/rotary-encoder.txt
@@ -46,7 +46,7 @@ c) Falling edge on channel A, channel B in high state
 
 d) Falling edge on channel B, channel A in low state
 	Parking position. If the encoder enters this state, a full transition
-	should have happend, unless it flipped back on half the way. The
+	should have happened, unless it flipped back on half the way. The
 	'armed' state tells us about that.
 
 2. Platform requirements
diff --git a/Documentation/input/walkera0701.txt b/Documentation/input/walkera0701.txt
index 8f4289efc5c..561385d3848 100644
--- a/Documentation/input/walkera0701.txt
+++ b/Documentation/input/walkera0701.txt
@@ -77,7 +77,7 @@ pulse length:
 
 24 bin+oct values + 1 bin value = 24*4+1 bits  = 97 bits
 
-(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync
+(Warning, pulses on ACK are inverted by transistor, irq is raised up on sync
 to bin change or octal value to bin change).
 
 Binary data representations:
diff --git a/Documentation/irqflags-tracing.txt b/Documentation/irqflags-tracing.txt
index 6a444877ee0..67aa71e7303 100644
--- a/Documentation/irqflags-tracing.txt
+++ b/Documentation/irqflags-tracing.txt
@@ -53,5 +53,5 @@ implementation in an architecture: lockdep will detect that and will
 turn itself off. I.e. the lock validator will still be reliable. There
 should be no crashes due to irq-tracing bugs. (except if the assembly
 changes break other code by modifying conditions or registers that
-shouldnt be)
+shouldn't be)
 
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 309eb5ed942..1688b5a1fd7 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -240,7 +240,7 @@ Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
 messages between their transport encoding described in the CAPI 2.0 standard
 and their _cmsg structure representation. Note that capi_cmsg2message() does
 not know or check the size of its destination buffer. The caller must make
-sure it is big enough to accomodate the resulting CAPI message.
+sure it is big enough to accommodate the resulting CAPI message.
 
 
 5. Lower Layer Interface Functions
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index b63301a0381..050d37fe6d4 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2008/10/24
+Last Updated: 2011/03/31
 ==================================
 �れ��
-linux-2.6.28/Documentation/HOWTO
+linux-2.6.38/Documentation/HOWTO
 �和訳��。
 
 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2008/10/24
+翻訳日： 2011/3/28
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： �倉�ん <nbh--mats at nifty dot com>
          �林 雅典�ん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -256,8 +256,8 @@ Linux カーãƒ�ルã�®é–‹ç™ºãƒ—ロセスã�¯ç�¾åœ¨å¹¾ã�¤ã�‹ã�®ç•°ã�ªã‚‹ãƒ¡ã‚¤ãƒ³ã‚
   - メイン� 2.6.x カー�ルツリー
   - 2.6.x.y -stable カー�ルツリー
   - 2.6.x -git カー�ルパッ�
-  - 2.6.x -mm カー�ルパッ�
   - サブシステム毎�カー�ルツリー�パッ�
+  - 統�テスト���� 2.6.x -next カー�ルツリー
 
 2.6.x カー�ルツリー
 -----------------
@@ -268,9 +268,9 @@ Linux カーãƒ�ルã�®é–‹ç™ºãƒ—ロセスã�¯ç�¾åœ¨å¹¾ã�¤ã�‹ã�®ç•°ã�ªã‚‹ãƒ¡ã‚¤ãƒ³ã‚
 
   - 新��カー�ル�リリース�れ�直後��2週間�特別期間�設�られ�
     ��期間中��メンテナ�� Linus �大��差分を�る�������。
-    ��よ��差分�通常 -mm カー�ル�数週間��れ���パッ���。
+    ��よ��差分�通常 -next カー�ル�数週間��れ���パッ���。
     大��変更� git(カー�ル�ソース管�ツール�詳細�
-    http://git.or.cz/  �照) を使���る��好���やり方����パッ
+    http://git-scm.com/  �照) を使���る��好���やり方����パッ
     �ファイル�形�����る��も�分��。
 
   - 2週間後�-rc1 カー�ル�リリース�れ���後��カー�ル全体�安定
@@ -333,86 +333,44 @@ git リãƒ�ジトリã�§ç®¡ç�†ã�•ã‚Œã�¦ã�„ã‚‹Linus ã�®ã‚«ãƒ¼ãƒ�ルツリーã�®æ¯Žæ
 れ� -rc カー�ル�比���パッ��大丈夫����も確�����自動的
 �生��れる���より実験的��。
 
-2.6.x -mm カー�ルパッ�
-------------------------
-
-Andrew Morton �よ��リリース�れる実験的�カー�ルパッ�群��。
-Andrew �個別�サブシステムカー�ルツリー�パッ�を全�集����
-linux-kernel メーリングリスト��集�れ�多数�パッ���時�一���
-����。
-��ツリー�新機能�パッ��検証�れる場��り��。�る期間�間パッ�
-� -mm �入��価値を証明�れ�ら�Andrew やサブシステムメンテナ��
-メインライン�入れるよ�� Linus �プッシュ���。
-
-メインカー�ルツリー���る��� Linus ��る�������新��パッ
-�� -mm ツリー�テスト�れる���強�推奨�れ����。マージウィン
-ドウ�開��� -mm ツリー��れ����パッ��メインライン�マージ�
-れる���困難��り��。
-
-�れら�カー�ル�安定��動作���システム���使�����切���
-り��ん��カー�ルブラン��中�もも��も動作�リスク�高�も���。
-
-も������カー�ル開発プロセス�支�を��������る���れ��
-����れら�カー�ルリリースをテスト�使��������も��題��
-れ����も�全��正��動作�����も�linux-kernel メーリングリ
-スト�フィード�ックを�供������。
-
-����他�実験的パッ��加����れら�カー�ル�通常リリース時点�
-メインライン� -git カー�ル���れる全��変更も�ん����。
-
--mm カー�ル�決���スケジュール��リリース�れ��ん����通常幾
-��� -mm カー�ル (1 �ら 3 �普通）��-rc カー�ル�間�リリース�
-れ��。
-
 サブシステム毎�カー�ルツリー�パッ�
 -------------------------------------------
 
-カー�ル�様々�領域�何�起���る�を見られるよ���る���多��
-カー�ルサブシステム開発者�彼ら�開発ツリーを公開�����。�れら�
-ツリー�説明��よ�� -mm カー�ルリリース�入れ込�れ��。
-
-以下������カー�ルツリー�中������リスト-
-
-  git ツリー-
-    - Kbuild �開発ツリー�Sam Ravnborg <sam@ravnborg.org>
-	git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
-
-    - ACPI �開発ツリー� Len Brown <len.brown@intel.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
-
-    - Block �開発ツリー�Jens Axboe <axboe@suse.de>
-	git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
-
-    - DRM �開発ツリー�Dave Airlie <airlied@linux.ie>
-	git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
-
-    - ia64 �開発ツリー�Tony Luck <tony.luck@intel.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
-
-    - infiniband, Roland Dreier <rolandd@cisco.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
-
-    - libata, Jeff Garzik <jgarzik@pobox.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
-
-    - �ットワークドライ�, Jeff Garzik <jgarzik@pobox.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-
-    - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
-	git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
-
-    - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
-	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
-
-    - x86, Ingo Molnar <mingo@elte.hu>
-	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
-
-  quilt ツリー-
-    - USB, ドライ�コア� I2C, Greg Kroah-Hartman <gregkh@suse.de>
-	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+�れ�れ�カー�ルサブシステム�メンテナ�� --- ���多��カー�ル
+サブシステム�開発者�も --- �自�最新�開発状�をソースリ�ジトリ�
+公開�����。�����自分��異�る領域�カー�ル�何�起���る
+�を他�人�見られるよ��������。開発�早�進ん��る領域���
+開発者�自身�投稿���サブシステムカー�ルツリーを元����る�質�
+�れる�����投稿����進行中�他�作業�������られ��。
+
+大部分��れら�リ�ジトリ� git ツリー��。�����他� SCM や
+quilt シリーズ���公開�れ��るパッ�キューも使�れ����。�れら
+�サブシステムリ�ジトリ�アドレス� MAINTAINERS ファイル�リスト�れ
+����。�れら�多�� http://git.kernel.org/ ��照�る������
+�。
 
-  ��他�カー�ルツリー� http://git.kernel.org/ � MAINTAINERS ファ
-  イル�一覧表��り��。
+�案�れ�パッ����よ��サブシステムツリー�コミット�れる���メー
+リングリスト�事��レビュー���られ��（以下�対応�るセクションを
+�照）。�����カー�ルサブシステム�����レビュー� patchwork
+���ツール�よ��追跡�れ��。Patchwork � web インターフェイス�
+よ��パッ�投稿�表示�パッ���コメント付�や改訂���������
+メンテナ�パッ��対���レビュー中��付済��拒����よ��マーク
+を��る�������。大部分��れら� patchwork �サイト�
+http://patchwork.kernel.org/ �リスト�れ����。
+
+統�テスト���� 2.6.x -next カー�ルツリー
+---------------------------------------------
+
+サブシステムツリー�更新内容�メインライン� 2.6.x ツリー�マージ�れ
+る����れら�統�テスト�れる必���り��。��目的����実質的
+�全サブシステムツリー�ら��毎日プル�れ���る特別�テスト用�リ
+�ジトリ�存在���-
+       http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+       http://linux.f-seidel.de/linux-next/pmwiki/
+
+��やり方�よ���-next カー�ル�次�マージ機会��ん�も��メイン
+ラインカー�ル�マージ�れる��������展望を�供���。-next 
+カー�ル�実行テストを行�冒険好��テスター�大��歓迎�れ��
 
 �グレ�ート
 -------------
@@ -673,10 +631,9 @@ Linux カーãƒ�ルコミュニティã�¯ã€�一度ã�«å¤§é‡�ã�®ã‚³ãƒ¼ãƒ‰ã�®å¡Šã‚’å–
 �����らスタート������ら。
 
 Paolo Ciarrocchi �感��彼�彼�書�� "Development Process"
-(http://linux.tar.bz/articles/2.6-development_process)セクショ
-ンを��テキスト�原型��る��を許����れ���。
-Rundy Dunlap � Gerrit Huizenga �メーリングリスト�やる�����や�
-���������リストを�供���れ���。
+(http://lwn.net/Articles/94386/) セクションを��テキスト�原型��る
+��を許����れ���。Rundy Dunlap � Gerrit Huizenga �メーリング
+リスト�やる�����や����������リストを�供���れ���。
 以下�人々�レビュー�コメント�貢献�感�。
 Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
 Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index f1431d099fc..7c2a89ba674 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -26,11 +26,11 @@ Additional options to the assembler (for built-in and modules).
 
 AFLAGS_MODULE
 --------------------------------------------------
-Addtional module specific options to use for $(AS).
+Additional module specific options to use for $(AS).
 
 AFLAGS_KERNEL
 --------------------------------------------------
-Addtional options for $(AS) when used for assembler
+Additional options for $(AS) when used for assembler
 code for code that is compiled as built-in.
 
 KCFLAGS
@@ -39,12 +39,12 @@ Additional options to the C compiler (for built-in and modules).
 
 CFLAGS_KERNEL
 --------------------------------------------------
-Addtional options for $(CC) when used to compile
+Additional options for $(CC) when used to compile
 code that is compiled as built-in.
 
 CFLAGS_MODULE
 --------------------------------------------------
-Addtional module specific options to use for $(CC).
+Additional module specific options to use for $(CC).
 
 LDFLAGS_MODULE
 --------------------------------------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c357a31411c..c603ef7b056 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -245,7 +245,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
-				  old_ordering, s4_nonvs, sci_force_enable }
+				  old_ordering, nonvs, sci_force_enable }
 			See Documentation/power/video.txt for information on
 			s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
@@ -699,7 +699,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
 			ekgdboc=kbd
 
-			This is desgined to be used in conjunction with
+			This is designed to be used in conjunction with
 			the boot argument: earlyprintk=vga
 
 	edd=		[EDD]
@@ -1664,6 +1664,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
 
+	nosmep		[X86]
+			Disable SMEP (Supervisor Mode Execution Protection)
+			even if it is supported by processor.
+
 	noexec32	[X86-64]
 			This affects only 32-bit executables.
 			noexec32=on: enable non-executable mappings (default)
@@ -1832,15 +1836,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
-	oops=panic	Always panic on oopses. Default is to just kill the process,
-			but there is a small probability of deadlocking the machine.
+	oops=panic	Always panic on oopses. Default is to just kill the
+			process, but there is a small probability of
+			deadlocking the machine.
 			This will also cause panics on machine check exceptions.
 			Useful together with panic=30 to trigger a reboot.
 
 	OSS		[HW,OSS]
 			See Documentation/sound/oss/oss-parameters.txt
 
-	panic=		[KNL] Kernel behaviour on panic
+	panic=		[KNL] Kernel behaviour on panic: delay <timeout>
+			seconds before rebooting
 			Format: <timeout>
 
 	parkbd.port=	[HW] Parallel port number the keyboard adapter is
@@ -2343,6 +2349,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	softlockup_panic=
 			[KNL] Should the soft-lockup detector generate panics.
+			Format: <integer>
 
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/sonypi.txt
@@ -2475,8 +2482,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	topology=	[S390]
 			Format: {off | on}
 			Specify if the kernel should make use of the cpu
-			topology informations if the hardware supports these.
-			The scheduler will make use of these informations and
+			topology information if the hardware supports this.
+			The scheduler will make use of this information and
 			e.g. base its process migration decisions on it.
 			Default is on.
 
@@ -2529,8 +2536,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			reported either.
 
 	unknown_nmi_panic
-			[X86]
-			Set unknown_nmi_panic=1 early on boot.
+			[X86] Cause panic on unknown NMI.
 
 	usbcore.autosuspend=
 			[USB] The autosuspend time delay (in seconds) used
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 34f6638aa5a..090e6ee0453 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -11,6 +11,7 @@ with the difference that the orphan objects are not freed but only
 reported via /sys/kernel/debug/kmemleak. A similar method is used by the
 Valgrind tool (memcheck --leak-check) to detect the memory leaks in
 user-space applications.
+Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
 
 Usage
 -----
@@ -178,5 +179,4 @@ block doesn't need to be freed (some cases in the init_call functions),
 the pointer is calculated by other methods than the usual container_of
 macro or the pointer is stored in a location not scanned by kmemleak.
 
-Page allocations and ioremap are not tracked. Only the ARM and x86
-architectures are currently supported.
+Page allocations and ioremap are not tracked.
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index c1c5be84e4b..803e51f6768 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -61,7 +61,7 @@ Usage
   Hotkeys are also reported as input keys (like keyboards) you can check
   which key are supported using "xev" under X11.
 
-  You can get informations on the version of your DSDT table by reading the
+  You can get information on the version of your DSDT table by reading the
   /sys/devices/platform/asus-laptop/infos entry. If you have a question or a
   bug report to do, please include the output of this entry.
 
@@ -178,7 +178,7 @@ LED display
 -----------
 
   Some models like the W1N have a LED display that can be used to display
-  several informations.
+  several items of information.
 
   LED display works for the following models:
     W1000N
diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
new file mode 100644
index 00000000000..29f481df32c
--- /dev/null
+++ b/Documentation/leds/00-INDEX
@@ -0,0 +1,8 @@
+leds-class.txt
+	- documents LED handling under Linux.
+leds-lp3944.txt
+	- notes on how to use the leds-lp3944 driver.
+leds-lp5521.txt
+	- notes on how to use the leds-lp5521 driver.
+leds-lp5523.txt
+	- notes on how to use the leds-lp5523 driver.
diff --git a/Documentation/leds-class.txt b/Documentation/leds/leds-class.txt
index 58b266bd184..4996586e27e 100644
--- a/Documentation/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -95,4 +95,3 @@ There are a number of cases where a trigger might only be mappable to a
 particular LED (ACPI?). The addition of triggers provided by the LED driver
 should cover this option and be possible to add without breaking the
 current interface.
-
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds/leds-lp3944.txt
index c6eda18b15e..c6eda18b15e 100644
--- a/Documentation/leds-lp3944.txt
+++ b/Documentation/leds/leds-lp3944.txt
diff --git a/Documentation/md.txt b/Documentation/md.txt
index a81c7b4790f..2366b1c8cf1 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -552,6 +552,16 @@ also have
      within the array where IO will be blocked.  This is currently
      only supported for raid4/5/6.
 
+   sync_min
+   sync_max
+     The two values, given as numbers of sectors, indicate a range
+     withing the array where 'check'/'repair' will operate. Must be
+     a multiple of chunk_size. When it reaches "sync_max" it will
+     pause, rather than complete.
+     You can use 'select' or 'poll' on "sync_completed" to wait for
+     that number to reach sync_max.  Then you can either increase
+     "sync_max", or can write 'idle' to "sync_action".
+
 
 Each active md device may also have attributes specific to the
 personality module that manages it.
diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt
index fd48add02cb..76a2087db20 100644
--- a/Documentation/media-framework.txt
+++ b/Documentation/media-framework.txt
@@ -194,7 +194,7 @@ each pad.
 
 Links are represented by a struct media_link instance, defined in
 include/media/media-entity.h. Each entity stores all links originating at or
-targetting any of its pads in a links array. A given link is thus stored
+targeting any of its pads in a links array. A given link is thus stored
 twice, once in the source entity and once in the target entity. The array is
 pre-allocated and grows dynamically as needed.
 
@@ -348,6 +348,6 @@ a streaming entity. Links that can be modified while streaming must be marked
 with the MEDIA_LNK_FL_DYNAMIC flag.
 
 If other operations need to be disallowed on streaming entities (such as
-changing entities configuration parameters) drivers can explictly check the
+changing entities configuration parameters) drivers can explicitly check the
 media_entity stream_count field to find out if an entity is streaming. This
 operation must be done with the media_device graph_mutex held.
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
index 8ace35ebdcd..cc887ecfd6e 100644
--- a/Documentation/mips/AU1xxx_IDE.README
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -39,13 +39,13 @@ Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
       Interface and Linux Device Driver" Application Note.
 
 
-FILES, CONFIGS AND COMPATABILITY
+FILES, CONFIGS AND COMPATIBILITY
 --------------------------------
 
 Two files are introduced:
 
   a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
-     containes : struct _auide_hwif
+     contains : struct _auide_hwif
                  timing parameters for PIO mode 0/1/2/3/4
                  timing parameters for MWDMA 0/1/2
 
diff --git a/Documentation/misc-devices/ics932s401 b/Documentation/misc-devices/ics932s401
index 07a739f406d..bdac67ff6e3 100644
--- a/Documentation/misc-devices/ics932s401
+++ b/Documentation/misc-devices/ics932s401
@@ -5,7 +5,7 @@ Supported chips:
   * IDT ICS932S401
     Prefix: 'ics932s401'
     Addresses scanned: I2C 0x69
-    Datasheet: Publically available at the IDT website
+    Datasheet: Publicly available at the IDT website
 
 Author: Darrick J. Wong
 
diff --git a/Documentation/networking/3c359.txt b/Documentation/networking/3c359.txt
index 4af8071a6d1..dadfe8147ab 100644
--- a/Documentation/networking/3c359.txt
+++ b/Documentation/networking/3c359.txt
@@ -45,7 +45,7 @@ debugging messages on, that must be done by modified the source code.
 
 Variable MTU size:
 
-The driver can handle a MTU size upto either 4500 or 18000 depending upon 
+The driver can handle a MTU size up to either 4500 or 18000 depending upon 
 ring speed.  The driver also changes the size of the receive buffers as part
 of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
 to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring 
diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200
index 616a8e540b0..b7658bed490 100644
--- a/Documentation/networking/README.ipw2200
+++ b/Documentation/networking/README.ipw2200
@@ -256,7 +256,7 @@ You can set the debug level via:
 
 Where $VALUE would be a number in the case of this sysfs entry.  The 
 input to sysfs files does not have to be a number.  For example, the 
-firmware loader used by hotplug utilizes sysfs entries for transfering 
+firmware loader used by hotplug utilizes sysfs entries for transferring 
 the firmware image from user space into the driver.
 
 The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries 
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index 18afcd8afd5..88d4afbdef9 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -1,4 +1,4 @@
-[state: 27-01-2011]
+[state: 17-04-2011]
 
 BATMAN-ADV
 ----------
@@ -19,6 +19,7 @@ duce the overhead to a minimum. It does not depend on any (other)
 network driver, and can be used on wifi as well as ethernet  lan,
 vpn,  etc ... (anything with ethernet-style layer 2).
 
+
 CONFIGURATION
 -------------
 
@@ -72,7 +73,7 @@ folder:
 #  fragmentation    gw_sel_class  vis_mode
 
 
-There is a special folder for debugging informations:
+There is a special folder for debugging information:
 
 #  ls /sys/kernel/debug/batman_adv/bat0/
 #  gateways     socket        transtable_global  vis_data
@@ -160,13 +161,13 @@ face.  Each  entry can/has to have the following values:
 -> "TQ mac  value"  -  src mac's link quality towards mac address
                        of a neighbor originator's interface which
                        is being used for routing
--> "HNA mac" - HNA announced by source mac
+-> "TT mac" - TT announced by source mac
 -> "PRIMARY" - this  is a primary interface
 -> "SEC mac" - secondary mac address of source
                (requires preceding PRIMARY)
 
 The TQ value has a range from 4 to 255 with 255 being  the  best.
-The HNA entries are showing which hosts are connected to the mesh
+The TT entries are showing which hosts are connected to the mesh
 via bat0 or being bridged into the mesh network.  The PRIMARY/SEC
 values are only applied on primary interfaces
 
@@ -199,7 +200,7 @@ abled  during run time. Following log_levels are defined:
 
 0 - All  debug  output  disabled
 1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or hna added / changed / deleted
+2 - Enable route or tt entry added / changed / deleted
 3 - Enable all messages
 
 The debug output can be changed at runtime  using  the  file
@@ -207,7 +208,7 @@ The debug output can be changed at runtime  using  the  file
 
 # echo 2 > /sys/class/net/bat0/mesh/log_level
 
-will enable debug messages for when routes or HNAs change.
+will enable debug messages for when routes or TTs change.
 
 
 BATCTL
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index b36e741e94d..1f45bd887d6 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1,7 +1,7 @@
 
 		Linux Ethernet Bonding Driver HOWTO
 
-		Latest update: 23 September 2009
+		Latest update: 27 April 2011
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -368,7 +368,7 @@ fail_over_mac
 		gratuitous ARP is lost, communication may be
 		disrupted.
 
-		When this policy is used in conjuction with the mii
+		When this policy is used in conjunction with the mii
 		monitor, devices which assert link up prior to being
 		able to actually transmit and receive are particularly
 		susceptible to loss of the gratuitous ARP, and an
@@ -585,25 +585,23 @@ mode
 		chosen.
 
 num_grat_arp
-
-	Specifies the number of gratuitous ARPs to be issued after a
-	failover event.  One gratuitous ARP is issued immediately after
-	the failover, subsequent ARPs are sent at a rate of one per link
-	monitor interval (arp_interval or miimon, whichever is active).
-
-	The valid range is 0 - 255; the default value is 1.  This option
-	affects only the active-backup mode.  This option was added for
-	bonding version 3.3.0.
-
 num_unsol_na
 
-	Specifies the number of unsolicited IPv6 Neighbor Advertisements
-	to be issued after a failover event.  One unsolicited NA is issued
-	immediately after the failover.
-
-	The valid range is 0 - 255; the default value is 1.  This option
-	affects only the active-backup mode.  This option was added for
-	bonding version 3.4.0.
+	Specify the number of peer notifications (gratuitous ARPs and
+	unsolicited IPv6 Neighbor Advertisements) to be issued after a
+	failover event.  As soon as the link is up on the new slave
+	(possibly immediately) a peer notification is sent on the
+	bonding device and each VLAN sub-device.  This is repeated at
+	each link monitor interval (arp_interval or miimon, whichever
+	is active) if the number is greater than 1.
+
+	The valid range is 0 - 255; the default value is 1.  These options
+	affect only the active-backup mode.  These options were added for
+	bonding versions 3.3.0 and 3.4.0 respectively.
+
+	From Linux 2.6.40 and bonding version 3.7.1, these notifications
+	are generated by the ipv4 and ipv6 code and the numbers of
+	repetitions cannot be set independently.
 
 primary
 
diff --git a/Documentation/networking/caif/Linux-CAIF.txt b/Documentation/networking/caif/Linux-CAIF.txt
index 7fe7a9a33a4..e52fd62bef3 100644
--- a/Documentation/networking/caif/Linux-CAIF.txt
+++ b/Documentation/networking/caif/Linux-CAIF.txt
@@ -136,7 +136,7 @@ The CAIF Protocol implementation contains:
       - CFMUX CAIF Mux layer. Handles multiplexing between multiple
 	physical bearers and multiple channels such as VEI, Datagram, etc.
 	The MUX keeps track of the existing CAIF Channels and
-	Physical Instances and selects the apropriate instance based
+	Physical Instances and selects the appropriate instance based
 	on Channel-Id and Physical-ID.
 
       - CFFRML CAIF Framing layer. Handles Framing i.e. Frame length
diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt
index 0cb8cb9098f..9efd0687dc4 100644
--- a/Documentation/networking/caif/spi_porting.txt
+++ b/Documentation/networking/caif/spi_porting.txt
@@ -150,7 +150,7 @@ static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
 void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
 {
 	/* If xfer is true then you should assert the SPI_INT to indicate to
-	 * the master that you are ready to recieve the data from the master
+	 * the master that you are ready to receive the data from the master
 	 * SPI. If xfer is false then you should de-assert SPI_INT to indicate
 	 * that the transfer is done.
 	 */
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 5b04b67ddca..56ca3b75376 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -240,7 +240,7 @@ solution for a couple of reasons:
   the user application using the common CAN filter mechanisms. Inside
   this filter definition the (interested) type of errors may be
   selected. The reception of error frames is disabled by default.
-  The format of the CAN error frame is briefly decribed in the Linux
+  The format of the CAN error frame is briefly described in the Linux
   header file "include/linux/can/error.h".
 
 4. How to use Socket CAN
diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
index 23c995e6403..f41ea240522 100644
--- a/Documentation/networking/ieee802154.txt
+++ b/Documentation/networking/ieee802154.txt
@@ -9,7 +9,7 @@ The Linux-ZigBee project goal is to provide complete implementation
 of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack
 of protocols for organizing Low-Rate Wireless Personal Area Networks.
 
-Currently only IEEE 802.15.4 layer is implemented. We have choosen
+Currently only IEEE 802.15.4 layer is implemented. We have chosen
 to use plain Berkeley socket API, the generic Linux networking stack
 to transfer IEEE 802.15.4 messages and a special protocol over genetlink
 for configuration/management
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
index 98953c0d534..9a2a037194a 100644
--- a/Documentation/networking/igb.txt
+++ b/Documentation/networking/igb.txt
@@ -93,6 +93,19 @@ Additional Configurations
   REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
   found, the system will fallback to MSI or to Legacy interrupts.
 
+  MAC and VLAN anti-spoofing feature
+  ----------------------------------
+  When a malicious driver attempts to send a spoofed packet, it is dropped by
+  the hardware and not transmitted.  An interrupt is sent to the PF driver
+  notifying it of the spoof attempt.
+
+  When a spoofed packet is detected the PF driver will send the following
+  message to the system log (displayed by  the "dmesg" command):
+
+  Spoof event(s) detected on VF(n)
+
+  Where n=the VF that attempted to do the spoofing.
+
 Support
 =======
 
diff --git a/Documentation/networking/olympic.txt b/Documentation/networking/olympic.txt
index c65a94010ea..b95b5bf9675 100644
--- a/Documentation/networking/olympic.txt
+++ b/Documentation/networking/olympic.txt
@@ -65,7 +65,7 @@ together.
 
 Variable MTU size:
 
-The driver can handle a MTU size upto either 4500 or 18000 depending upon 
+The driver can handle a MTU size up to either 4500 or 18000 depending upon 
 ring speed.  The driver also changes the size of the receive buffers as part
 of the mtu re-sizing, so if you set mtu = 18000, you will need to be able
 to allocate 16 * (sk_buff with 18000 buffer size) call it 18500 bytes per ring 
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 073894d1c09..4acea660372 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -223,7 +223,7 @@ we will get the following buffer structure:
 
 A frame can be of any size with the only condition it can fit in a block. A block
 can only hold an integer number of frames, or in other words, a frame cannot 
-be spawned accross two blocks, so there are some details you have to take into 
+be spawned across two blocks, so there are some details you have to take into 
 account when choosing the frame_size. See "Mapping and use of the circular 
 buffer (ring)".
 
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt
index 9d4e0f4df5a..4be0c039edb 100644
--- a/Documentation/networking/s2io.txt
+++ b/Documentation/networking/s2io.txt
@@ -37,7 +37,7 @@ To associate an interface with a physical adapter use "ethtool -p <ethX>".
 The corresponding adapter's LED will blink multiple times.
 
 3.	Features supported:
-a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes,
+a. Jumbo frames. Xframe I/II supports MTU up to 9600 bytes,
 modifiable using ifconfig command.
 
 b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit
@@ -49,7 +49,7 @@ significant performance improvement on certain platforms(SGI Altix,
 IBM xSeries).
 
 d. MSI/MSI-X. Can be enabled on platforms which support this feature
-(IA64, Xeon) resulting in noticeable performance improvement(upto 7%
+(IA64, Xeon) resulting in noticeable performance improvement(up to 7%
 on certain platforms).
 
 e. Statistics. Comprehensive MAC-level and software statistics displayed
diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt
index dcadf6f88e3..70d6cf60825 100644
--- a/Documentation/networking/tc-actions-env-rules.txt
+++ b/Documentation/networking/tc-actions-env-rules.txt
@@ -1,5 +1,5 @@
 
-The "enviromental" rules for authors of any new tc actions are:
+The "environmental" rules for authors of any new tc actions are:
 
 1) If you stealeth or borroweth any packet thou shalt be branching
 from the righteous path and thou shalt cloneth.
@@ -20,7 +20,7 @@ this way any action downstream can stomp on the packet.
 3) Dropping packets you don't own is a no-no. You simply return
 TC_ACT_SHOT to the caller and they will drop it.
 
-The "enviromental" rules for callers of actions (qdiscs etc) are:
+The "environmental" rules for callers of actions (qdiscs etc) are:
 
 *) Thou art responsible for freeing anything returned as being
 TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index f023ba6bba6..88880839ece 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -279,11 +279,15 @@ When the system goes into the standby or memory sleep state, the phases are:
 	time.)  Unlike the other suspend-related phases, during the prepare
 	phase the device tree is traversed top-down.
 
-	The prepare phase uses only a bus callback.  After the callback method
-	returns, no new children may be registered below the device.  The method
-	may also prepare the device or driver in some way for the upcoming
-	system power transition, but it should not put the device into a
-	low-power state.
+	In addition to that, if device drivers need to allocate additional
+	memory to be able to hadle device suspend correctly, that should be
+	done in the prepare phase.
+
+	After the prepare callback method returns, no new children may be
+	registered below the device.  The method may also prepare the device or
+	driver in some way for the upcoming system power transition (for
+	example, by allocating additional memory required for this purpose), but
+	it should not put the device into a low-power state.
 
     2.	The suspend methods should quiesce the device to stop it from performing
 	I/O.  They also may save the device registers and put it into the
@@ -367,7 +371,7 @@ Drivers need to be able to handle hardware which has been reset since the
 suspend methods were called, for example by complete reinitialization.
 This may be the hardest part, and the one most protected by NDA'd documents
 and chip errata.  It's simplest if the hardware state hasn't changed since
-the suspend was carried out, but that can't be guaranteed (in fact, it ususally
+the suspend was carried out, but that can't be guaranteed (in fact, it usually
 is not the case).
 
 Drivers must also be prepared to notice that the device has been removed
diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt
index ae1b7ec0768..c2a4a346c0d 100644
--- a/Documentation/power/notifiers.txt
+++ b/Documentation/power/notifiers.txt
@@ -1,46 +1,41 @@
 Suspend notifiers
-	(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
-
-There are some operations that device drivers may want to carry out in their
-.suspend() routines, but shouldn't, because they can cause the hibernation or
-suspend to fail. For example, a driver may want to allocate a substantial amount
-of memory (like 50 MB) in .suspend(), but that shouldn't be done after the
-swsusp's memory shrinker has run.
-
-Also, there may be some operations, that subsystems want to carry out before a
-hibernation/suspend or after a restore/resume, requiring the system to be fully
-functional, so the drivers' .suspend() and .resume() routines are not suitable
-for this purpose.  For example, device drivers may want to upload firmware to
-their devices after a restore from a hibernation image, but they cannot do it by
-calling request_firmware() from their .resume() routines (user land processes
-are frozen at this point).  The solution may be to load the firmware into
-memory before processes are frozen and upload it from there in the .resume()
-routine.  Of course, a hibernation notifier may be used for this purpose.
-
-The subsystems that have such needs can register suspend notifiers that will be
-called upon the following events by the suspend core:
+	(C) 2007-2011 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+
+There are some operations that subsystems or drivers may want to carry out
+before hibernation/suspend or after restore/resume, but they require the system
+to be fully functional, so the drivers' and subsystems' .suspend() and .resume()
+or even .prepare() and .complete() callbacks are not suitable for this purpose.
+For example, device drivers may want to upload firmware to their devices after
+resume/restore, but they cannot do it by calling request_firmware() from their
+.resume() or .complete() routines (user land processes are frozen at these
+points).  The solution may be to load the firmware into memory before processes
+are frozen and upload it from there in the .resume() routine.
+A suspend/hibernation notifier may be used for this purpose.
+
+The subsystems or drivers having such needs can register suspend notifiers that
+will be called upon the following events by the PM core:
 
 PM_HIBERNATION_PREPARE	The system is going to hibernate or suspend, tasks will
 			be frozen immediately.
 
 PM_POST_HIBERNATION	The system memory state has been restored from a
-			hibernation image or an error occured during the
-			hibernation.  Device drivers' .resume() callbacks have
+			hibernation image or an error occurred during
+			hibernation.  Device drivers' restore callbacks have
 			been executed and tasks have been thawed.
 
 PM_RESTORE_PREPARE	The system is going to restore a hibernation image.
-			If all goes well the restored kernel will issue a
+			If all goes well, the restored kernel will issue a
 			PM_POST_HIBERNATION notification.
 
-PM_POST_RESTORE		An error occurred during the hibernation restore.
-			Device drivers' .resume() callbacks have been executed
+PM_POST_RESTORE		An error occurred during restore from hibernation.
+			Device drivers' restore callbacks have been executed
 			and tasks have been thawed.
 
-PM_SUSPEND_PREPARE	The system is preparing for a suspend.
+PM_SUSPEND_PREPARE	The system is preparing for suspend.
 
-PM_POST_SUSPEND		The system has just resumed or an error occured during
-			the suspend.	Device drivers' .resume() callbacks have
-			been executed and tasks have been thawed.
+PM_POST_SUSPEND		The system has just resumed or an error occurred during
+			suspend.  Device drivers' resume callbacks have been
+			executed and tasks have been thawed.
 
 It is generally assumed that whatever the notifiers do for
 PM_HIBERNATION_PREPARE, should be undone for PM_POST_HIBERNATION.  Analogously,
diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index cd445582d1f..5ae70a12c1e 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -178,7 +178,7 @@ opp_find_freq_ceil - Search for an available OPP which is *at least* the
 		if (!IS_ERR(opp))
 			soc_switch_to_freq_voltage(freq);
 		else
-			/* do something when we cant satisfy the req */
+			/* do something when we can't satisfy the req */
 		/* do other stuff */
 	 }
 
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index ea718891a66..ac190cf1963 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -192,7 +192,7 @@ Q: There don't seem to be any generally useful behavioral
 distinctions between SUSPEND and FREEZE.
 
 A: Doing SUSPEND when you are asked to do FREEZE is always correct,
-but it may be unneccessarily slow. If you want your driver to stay simple,
+but it may be unnecessarily slow. If you want your driver to stay simple,
 slowness may not matter to you. It can always be fixed later.
 
 For devices like disk it does matter, you do not want to spindown for
@@ -237,7 +237,7 @@ disk. Whole sequence goes like
 
       running system, user asks for suspend-to-disk
 
-      user processes are stopped (in common case there are none, but with resume-from-initrd, noone knows)
+      user processes are stopped (in common case there are none, but with resume-from-initrd, no one knows)
 
       read image from disk
 
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 81680f9f590..1101bee4e82 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -98,7 +98,7 @@ SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to
 The device's read() operation can be used to transfer the snapshot image from
 the kernel.  It has the following limitations:
 - you cannot read() more than one virtual memory page at a time
-- read()s accross page boundaries are impossible (ie. if ypu read() 1/2 of
+- read()s across page boundaries are impossible (ie. if ypu read() 1/2 of
 	a page in the previous call, you will only be able to read()
 	_at_ _most_ 1/2 of the page in the next call)
 
@@ -137,7 +137,7 @@ mechanism and the userland utilities using the interface SHOULD use additional
 means, such as checksums, to ensure the integrity of the snapshot image.
 
 The suspending and resuming utilities MUST lock themselves in memory,
-preferrably using mlockall(), before calling SNAPSHOT_FREEZE.
+preferably using mlockall(), before calling SNAPSHOT_FREEZE.
 
 The suspending utility MUST check the value stored by SNAPSHOT_CREATE_IMAGE
 in the memory location pointed to by the last argument of ioctl() and proceed
@@ -147,7 +147,7 @@ in accordance with it:
 	(a)	The suspending utility MUST NOT close the snapshot device
 		_unless_ the whole suspend procedure is to be cancelled, in
 		which case, if the snapshot image has already been saved, the
-		suspending utility SHOULD destroy it, preferrably by zapping
+		suspending utility SHOULD destroy it, preferably by zapping
 		its header.  If the suspend is not to be cancelled, the
 		system MUST be powered off or rebooted after the snapshot
 		image has been saved.
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt
index 6d8be3468d7..a730ca5a07f 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.txt
@@ -528,7 +528,7 @@ this driver assignment of hotplug added vty-servers may be in a different
 order than how they would be exposed on module load.  Rebooting or
 reloading the module after dynamic addition may result in the /dev/hvcs*
 and vty-server coupling changing if a vty-server adapter was added in a
-slot inbetween two other vty-server adapters.  Refer to the section above
+slot between two other vty-server adapters.  Refer to the section above
 on how to determine which vty-server goes with which /dev/hvcs* node.
 Hint; look at the sysfs "index" attribute for the vty-server.
 
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 86f9f74b2b3..efe998becc5 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -2273,7 +2273,7 @@ IP forwarding is on.
 There is a lot of useful info in here best found by going in & having a look around,
 so I'll take you through some entries I consider important.
 
-All the processes running on the machine have there own entry defined by
+All the processes running on the machine have their own entry defined by
 /proc/<pid>
 So lets have a look at the init process
 cd /proc/1
diff --git a/Documentation/scheduler/sched-domains.txt b/Documentation/scheduler/sched-domains.txt
index 373ceacc367..b7ee379b651 100644
--- a/Documentation/scheduler/sched-domains.txt
+++ b/Documentation/scheduler/sched-domains.txt
@@ -1,8 +1,7 @@
-Each CPU has a "base" scheduling domain (struct sched_domain). These are
-accessed via cpu_sched_domain(i) and this_sched_domain() macros. The domain
+Each CPU has a "base" scheduling domain (struct sched_domain). The domain
 hierarchy is built from these base domains via the ->parent pointer. ->parent
-MUST be NULL terminated, and domain structures should be per-CPU as they
-are locklessly updated.
+MUST be NULL terminated, and domain structures should be per-CPU as they are
+locklessly updated.
 
 Each scheduling domain spans a number of CPUs (stored in the ->span field).
 A domain's span MUST be a superset of it child's span (this restriction could
@@ -26,11 +25,26 @@ is treated as one entity. The load of a group is defined as the sum of the
 load of each of its member CPUs, and only when the load of a group becomes
 out of balance are tasks moved between groups.
 
-In kernel/sched.c, rebalance_tick is run periodically on each CPU. This
-function takes its CPU's base sched domain and checks to see if has reached
-its rebalance interval. If so, then it will run load_balance on that domain.
-rebalance_tick then checks the parent sched_domain (if it exists), and the
-parent of the parent and so forth.
+In kernel/sched.c, trigger_load_balance() is run periodically on each CPU
+through scheduler_tick(). It raises a softirq after the next regularly scheduled
+rebalancing event for the current runqueue has arrived. The actual load
+balancing workhorse, run_rebalance_domains()->rebalance_domains(), is then run
+in softirq context (SCHED_SOFTIRQ).
+
+The latter function takes two arguments: the current CPU and whether it was idle
+at the time the scheduler_tick() happened and iterates over all sched domains
+our CPU is on, starting from its base domain and going up the ->parent chain.
+While doing that, it checks to see if the current domain has exhausted its
+rebalance interval. If so, it runs load_balance() on that domain. It then checks
+the parent sched_domain (if it exists), and the parent of the parent and so
+forth.
+
+Initially, load_balance() finds the busiest group in the current sched domain.
+If it succeeds, it looks for the busiest runqueue of all the CPUs' runqueues in
+that group. If it manages to find such a runqueue, it locks both our initial
+CPU's runqueue and the newly found busiest one and starts moving tasks from it
+to our runqueue. The exact number of tasks amounts to an imbalance previously
+computed while iterating over this sched domain's groups.
 
 *** Implementing sched domains ***
 The "base" domain will "span" the first level of the hierarchy. In the case
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index 5e83769c6aa..c56ec99d7b2 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -352,7 +352,7 @@ Changes from 20041229 to 20050110
 	  lpfc_scsiport.c
 	* In remote port changes: no longer nulling target->pnode when
 	  removing from mapped list. Pnode get nulled when the node is
-	  freed (after nodev tmo). This bug was causing i/o recieved in
+	  freed (after nodev tmo). This bug was causing i/o received in
 	  the small window while the device was blocked to be errored w/
 	  did_no_connect. With the fix, it returns host_busy
 	  (per the pre-remote port changes).
@@ -530,7 +530,7 @@ Changes from 20041018 to 20041123
 	  coherent mappings.  Note: There are more consistent mappings
 	  that are using pci_dma_sync calls. Probably these should be
 	  removed as well.
-	* Modified lpfc_free_scsi_buf to accomodate all three scsi_buf
+	* Modified lpfc_free_scsi_buf to accommodate all three scsi_buf
 	  free types to alleviate miscellaneous panics with cable pull
 	  testing.
 	* Set hotplug to default 0 and lpfc_target_remove to not remove
@@ -583,7 +583,7 @@ Changes from 20041018 to 20041123
 	  included more than once.
 	* Replaced "set_current_state(TASK_UNINTERRUPTIBLE);
 	  schedule_timeout(timeout)" with "msleep(timeout)".
-	* Fixnode was loosing starget when rediscovered. We saw messages
+	* Fixnode was losing starget when rediscovered. We saw messages
 	  like: lpfc 0000:04:02.0: 0:0263 Cannot block scsi target as a
 	  result.  Moved starget field into struct lpfc_target which is
 	  referenced from the node.
@@ -604,7 +604,7 @@ Changes from 20041018 to 20041123
 	* Make 3 functions static: lpfc_get_hba_sym_node_name,
 	  lpfc_intr_prep and lpfc_setup_slim_access.  Move lpfc_intr_prep
 	  and lpfc_setup_slim_access so they're defined before being used.
-	* Remove an unecessary list_del() in lpfc_hbadisc.c.
+	* Remove an unnecessary list_del() in lpfc_hbadisc.c.
 	* Set nlp_state before calling lpfc_nlp_list() since this will
 	  potentially call fc_target_unblock which may cause a race in
 	  queuecommand by releasing host_lock.
@@ -753,7 +753,7 @@ Changes from 20040908 to 20040920
 	* Changed version number to 8.0.12
 	* Removed used #defines: DEFAULT_PCI_LATENCY_CLOCKS and
 	  PCI_LATENCY_VALUE from lpfc_hw.h.
-	* Changes to accomodate rnid.
+	* Changes to accommodate rnid.
 	* Fix RSCN handling so RSCN NS queries only effect NPorts found in
 	  RSCN data.
 	* If we rcv a plogi on a NPort queued up for discovery, clear the
@@ -813,7 +813,7 @@ Changes from 20040908 to 20040920
 	  counter instead, brd_no isn't reused anymore.  Also some tiny
 	  whitespace cleanups in surrounding code.
 	* Reorder functions in lpfc_els.c to remove need for prototypes.
-	* Removed unsed prototypes from lpfc_crtn.h -
+	* Removed unused prototypes from lpfc_crtn.h -
 	  lpfc_ip_timeout_handler, lpfc_read_pci and lpfc_revoke.
 	* Removed some unused prototypes from lpfc_crtn.h -
 	  lpfc_scsi_hba_reset, lpfc_scsi_issue_inqsn,
@@ -863,7 +863,7 @@ Changes from 20040823 to 20040908
 	* Minimal support for SCSI flat space addressing/volume set
 	  addressing.  Use 16 bits of LUN address so that flat
 	  addressing/VSA will work.
-	* Changed 2 occurences of if( 1 != f(x)) to if(f(x) != 1)
+	* Changed 2 occurrences of if( 1 != f(x)) to if(f(x) != 1)
 	* Drop include of lpfc_cfgparm.h.
 	* Reduce stack usage of lpfc_fdmi_cmd in lpfc_ct.c.
 	* Add minimum range checking property to /sys write/store
@@ -1449,7 +1449,7 @@ Changes from 20040402 to 20040409
 	* Removed lpfc_els_chk_latt from the lpfc_config_post function.
 	  lpfc_els_chk_latt will enable the link event interrupts when
 	  flogi is pending which causes two discovery state machines
-	  running parallely.
+	  running parallelly.
 	* Add pci_disable_device to unload path.
 	* Move lpfc_sleep_event from lpfc_fcp.c to lpfc_util_ioctl.c
 	* Call dma_map_single() & pci_map_single() directly instead of via
@@ -1590,7 +1590,7 @@ Changes from 20040326 to 20040402
 	  ELX_WRITE_HS ELX_WRITE_HA ELX_WRITE_CA ELX_READ_HC
 	  ELX_READ_HS ELX_READ_HA ELX_READ_CA ELX_READ_MB ELX_RESET
 	  ELX_READ_HBA ELX_INSTANCE ELX_LIP.  Also introduced
-	  attribute "set" to be used in conjuction with the above
+	  attribute "set" to be used in conjunction with the above
 	  attributes.
 	* Removed DLINK, enque and deque declarations now that clock
 	  doesn't use them anymore
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 5e07d320817..d2052fdbedd 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -168,7 +168,7 @@ Older Version	: 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
 
 1.	Sorted out PCI IDs to remove megaraid support overlaps.
 	Based on the patch from Daniel, sorted out PCI IDs along with
-	charactor node name change from 'megadev' to 'megadev_legacy' to avoid
+	character node name change from 'megadev' to 'megadev_legacy' to avoid
 	conflict.
 	---
 	Hopefully we'll be getting the build restriction zapped much sooner, 
diff --git a/Documentation/scsi/ChangeLog.ncr53c8xx b/Documentation/scsi/ChangeLog.ncr53c8xx
index 8b278c10edf..9288e3d8974 100644
--- a/Documentation/scsi/ChangeLog.ncr53c8xx
+++ b/Documentation/scsi/ChangeLog.ncr53c8xx
@@ -200,7 +200,7 @@ Sun Feb  14:00 1999 Gerard Roudier (groudier@club-internet.fr)
 	  By default the driver uses both IRQF_SHARED and IRQF_DISABLED.
 	  Option 'ncr53c8xx=irqm:0x20' may be used when an IRQ is shared by 
 	  a 53C8XX adapter and a network board.
-	- Tiny mispelling fixed (ABORT instead of ABRT). Was fortunately 
+	- Tiny misspelling fixed (ABORT instead of ABRT). Was fortunately 
 	  harmless.
 	- Negotiate SYNC data transfers with CCS devices.
 
diff --git a/Documentation/scsi/ChangeLog.sym53c8xx b/Documentation/scsi/ChangeLog.sym53c8xx
index 02ffbc1e8a8..c1933707d0b 100644
--- a/Documentation/scsi/ChangeLog.sym53c8xx
+++ b/Documentation/scsi/ChangeLog.sym53c8xx
@@ -457,7 +457,7 @@ Fri Jan  1  20:00 1999 Gerard Roudier (groudier@club-internet.fr)
 Sat Dec 19  21:00 1998 Gerard Roudier (groudier@club-internet.fr)
 	* version sym53c8xx-1.0
 	- Define some new IO registers for the 896 (istat1, mbox0, mbox1)
-	- Revamp slighly the Symbios NVRAM lay-out based on the excerpt of 
+	- Revamp slightly the Symbios NVRAM lay-out based on the excerpt of 
 	  the header file I received from Symbios.
 	- Check the PCI bus number for the boot order (Using a fast 
 	  PCI controller behing a PCI-PCI bridge seems sub-optimal).
diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx
index 9e15b4f9cd2..19e7cd4bba6 100644
--- a/Documentation/scsi/LICENSE.qla2xxx
+++ b/Documentation/scsi/LICENSE.qla2xxx
@@ -1,11 +1,11 @@
-Copyright (c)  2003-2005 QLogic Corporation
-QLogic Linux Fibre Channel HBA Driver
+Copyright (c) 2003-2011 QLogic Corporation
+QLogic Linux/ESX Fibre Channel HBA Driver
 
-This program includes a device driver for Linux 2.6 that may be
+This program includes a device driver for Linux 2.6/ESX that may be
 distributed with QLogic hardware specific firmware binary file.
 You may modify and redistribute the device driver code under the
-GNU General Public License as published by the Free Software
-Foundation (version 2 or a later version).
+GNU General Public License (a copy of which is attached hereto as
+Exhibit A) published by the Free Software Foundation (version 2).
 
 You may redistribute the hardware specific firmware binary file
 under the following terms:
@@ -43,3 +43,285 @@ OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
 TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
 ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
 COMBINATION WITH THIS PROGRAM.
+
+
+EXHIBIT A
+
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
diff --git a/Documentation/scsi/aha152x.txt b/Documentation/scsi/aha152x.txt
index 29ce6d87e45..94848734ac6 100644
--- a/Documentation/scsi/aha152x.txt
+++ b/Documentation/scsi/aha152x.txt
@@ -124,7 +124,7 @@ in the partition table and therefore every operating system has to know
 the right geometry to be able to interpret it.
 
 Moreover there are certain limitations to the C/H/S addressing scheme,
-namely the address space is limited to upto 255 heads, upto 63 sectors
+namely the address space is limited to up to 255 heads, up to 63 sectors
 and a maximum of 1023 cylinders.
 
 The AHA-1522 BIOS calculates the geometry by fixing the number of heads
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 16e054c9c70..64ac7093c87 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -267,7 +267,7 @@ The following information is available in this file:
               Option: tag_info:{{value[,value...]}[,{value[,value...]}...]}
           Definition: Set the per-target tagged queue depth on a
                       per controller basis.  Both controllers and targets
-                      may be ommitted indicating that they should retain
+                      may be omitted indicating that they should retain
                       the default tag depth.
             Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
                         On Controller 0
@@ -291,7 +291,7 @@ The following information is available in this file:
                       The rd_strm_bitmask is a 16 bit hex value in which
                       each bit represents a target.  Setting the target's
                       bit to '1' enables read streaming for that
-                      target.  Controllers may be ommitted indicating that
+                      target.  Controllers may be omitted indicating that
                       they should retain the default read streaming setting.
              Example: rd_strm:{0x0041}
                         On Controller 0
@@ -313,7 +313,7 @@ The following information is available in this file:
    -----------------------------------------------------------------
               Option: dv: {value[,value...]}
           Definition: Set Domain Validation Policy on a per-controller basis.
-                      Controllers may be ommitted indicating that
+                      Controllers may be omitted indicating that
                       they should retain the default read streaming setting.
              Example: dv:{-1,0,,1,1,0}
                         On Controller 0 leave DV at its default setting.
@@ -340,7 +340,7 @@ The following information is available in this file:
               Option: precomp: {value[,value...]}
           Definition: Set IO Cell precompensation value on a per-controller
                       basis.
-                      Controllers may be ommitted indicating that
+                      Controllers may be omitted indicating that
                       they should retain the default precompensation setting.
              Example: precomp:{0x1}
                         On Controller 0 set precompensation to 1.
@@ -353,7 +353,7 @@ The following information is available in this file:
    -----------------------------------------------------------------
               Option: slewrate: {value[,value...]}
           Definition: Set IO Cell slew rate on a per-controller basis.
-                      Controllers may be ommitted indicating that
+                      Controllers may be omitted indicating that
                       they should retain the default slew rate setting.
              Example: slewrate:{0x1}
                         On Controller 0 set slew rate to 1.
@@ -366,7 +366,7 @@ The following information is available in this file:
    -----------------------------------------------------------------
               Option: amplitude: {value[,value...]}
           Definition: Set IO Cell signal amplitude on a per-controller basis.
-                      Controllers may be ommitted indicating that
+                      Controllers may be omitted indicating that
                       they should retain the default read streaming setting.
              Example: amplitude:{0x1}
                         On Controller 0 set amplitude to 1.
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index 45d61ad8c6f..ac41a9fcac7 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -303,7 +303,7 @@
    (scb) and calls a local function issue_cmd(), which writes a scb 
    command into subsystem I/O ports. Once the scb command is carried out, 
    the interrupt_handler() is invoked. If a device is determined to be 
-   existant and it has not assigned any ldn, it gets one dynamically.
+   existent and it has not assigned any ldn, it gets one dynamically.
    For this, the whole stuff is done in ibmmca_queuecommand().
 
    2.6 Abort & Reset Commands
@@ -741,7 +741,7 @@
       some error appeared, else it is undefined. Now, this is fixed. Before
       any SCB command gets queued, the tsb.dev_status is set to 0, so the 
       cmd->result won't screw up Linux higher level drivers.
-   2) The reset-function has slightly improved. This is still planed for 
+   2) The reset-function has slightly improved. This is still planned for 
       abort. During the abort and the reset function, no interrupts are 
       allowed. This is however quite hard to cope with, so the INT-status
       register is read. When the interrupt gets queued, one can find its
diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
index 032399b16a5..ade046ea7c1 100644
--- a/Documentation/scsi/scsi-changer.txt
+++ b/Documentation/scsi/scsi-changer.txt
@@ -102,7 +102,7 @@ Trouble?
 
 If you insmod the driver with "insmod debug=1", it will be verbose and
 prints a lot of stuff to the syslog.  Compiling the kernel with
-CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot
+CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages a lot
 because the kernel will translate the error codes into human-readable
 strings then.
 
diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt
index 7acbebb17fa..6ff16b620d8 100644
--- a/Documentation/scsi/scsi_eh.txt
+++ b/Documentation/scsi/scsi_eh.txt
@@ -290,7 +290,7 @@ scmd->allowed.
 	SCSI transports/LLDDs automatically acquire sense data on
 	command failures (autosense).  Autosense is recommended for
 	performance reasons and as sense information could get out of
-	sync inbetween occurrence of CHECK CONDITION and this action.
+	sync between occurrence of CHECK CONDITION and this action.
 
 	Note that if autosense is not supported, scmd->sense_buffer
 	contains invalid sense data when error-completing the scmd
diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt
index e00192de4d1..f79282fc48d 100644
--- a/Documentation/scsi/scsi_fc_transport.txt
+++ b/Documentation/scsi/scsi_fc_transport.txt
@@ -291,7 +291,7 @@ Transport <-> LLDD Interfaces :
 Vport support by LLDD:
 
   The LLDD indicates support for vports by supplying a vport_create()
-  function in the transport template.  The presense of this function will
+  function in the transport template.  The presence of this function will
   cause the creation of the new attributes on the fc_host.  As part of
   the physical port completing its initialization relative to the
   transport, it should set the max_npiv_vports attribute to indicate the
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 6f63b798967..6af8f7a7770 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -285,7 +285,7 @@ from the driver.
 
 7. Profiling information
 
-This driver does not provide profiling informations as did its predecessors.
+This driver does not provide profiling information as did its predecessors.
 This feature was not this useful and added complexity to the code. 
 As the driver code got more complex, I have decided to remove everything 
 that didn't seem actually useful.
diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio
index d1044391868..5d2a33be0bd 100644
--- a/Documentation/serial/moxa-smartio
+++ b/Documentation/serial/moxa-smartio
@@ -473,7 +473,7 @@ Content
    spd_normal	  Use  38.4kb  when  the application requests 38.4kb.
    spd_cust	  Use  the custom divisor to set the speed when  the
 		  application requests 38.4kb.
-   divisor	  This option set the custom divison.
+   divisor	  This option set the custom division.
    baud_base	  This option set the base baud rate.
 
 -----------------------------------------------------------------------------
diff --git a/Documentation/serial/n_gsm.txt b/Documentation/serial/n_gsm.txt
index 397f41a1f15..a5d91126a8f 100644
--- a/Documentation/serial/n_gsm.txt
+++ b/Documentation/serial/n_gsm.txt
@@ -34,7 +34,7 @@ Major parts of the initialization program :
 	/* configure the serial port : speed, flow control ... */
 
 	/* send the AT commands to switch the modem to CMUX mode
-	   and check that it's succesful (should return OK) */
+	   and check that it's successful (should return OK) */
 	write(fd, "AT+CMUX=0\r", 10);
 
 	/* experience showed that some modems need some time before
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3c1eddd9fcc..9822afb6313 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -322,7 +322,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
     or the value stored in the card's EEPROM for cards that have an EEPROM and
     their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
-    be choosen freely from the options enumerated above.
+    be chosen freely from the options enumerated above.
 
     If dma2 is specified and different from dma1, the card will operate in
     full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
@@ -356,7 +356,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
     or the value stored in the card's EEPROM for cards that have an EEPROM and
     their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
-    be choosen freely from the options enumerated above.
+    be chosen freely from the options enumerated above.
 
     If dma2 is specified and different from dma1, the card will operate in
     full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
@@ -2229,7 +2229,7 @@ Proc interfaces (/proc/asound)
 
 /proc/asound/card#/pcm#[cp]/oss
 -------------------------------
-  String "erase" - erase all additional informations about OSS applications
+  String "erase" - erase all additional information about OSS applications
   String "<app_name> <fragments> <fragment_size> [<options>]"
 
    <app_name> - name of application with (higher priority) or without path
diff --git a/Documentation/sound/alsa/SB-Live-mixer.txt b/Documentation/sound/alsa/SB-Live-mixer.txt
index f5639d40521..f4b5988f450 100644
--- a/Documentation/sound/alsa/SB-Live-mixer.txt
+++ b/Documentation/sound/alsa/SB-Live-mixer.txt
@@ -87,14 +87,14 @@ accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
 The result is forwarded to the ADC capture FIFO (thus to the standard capture
 PCM device).
 
-name='Music Playback Volume',index=0
+name='Synth Playback Volume',index=0
 
 This control is used to attenuate samples for left and right MIDI FX-bus
 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
 
-name='Music Capture Volume',index=0
-name='Music Capture Switch',index=0
+name='Synth Capture Volume',index=0
+name='Synth Capture Switch',index=0
 
 These controls are used to attenuate samples for left and right MIDI FX-bus
 accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16
index c0f08922993..e0dc0641b48 100644
--- a/Documentation/sound/oss/AudioExcelDSP16
+++ b/Documentation/sound/oss/AudioExcelDSP16
@@ -1,10 +1,10 @@
 Driver
 ------
 
-Informations about Audio Excel DSP 16 driver can be found in the source
+Information about Audio Excel DSP 16 driver can be found in the source
 file aedsp16.c
 Please, read the head of the source before using it. It contain useful
-informations.
+information.
 
 Configuration
 -------------
@@ -68,7 +68,7 @@ Sound cards supported
 This driver supports the SC-6000 and SC-6600 based Gallant's sound card.
 It don't support the Audio Excel DSP 16 III (try the SC-6600 code).
 I'm working on the III version of the card: if someone have useful
-informations about it, please let me know.
+information about it, please let me know.
 For all the non-supported audio cards, you have to boot MS-DOS (or WIN95)
 activating the audio card with the MS-DOS device driver, then you have to
 <ctrl>-<alt>-<del> and boot Linux.
diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS
index c615debbf08..4be259428a1 100644
--- a/Documentation/sound/oss/README.OSS
+++ b/Documentation/sound/oss/README.OSS
@@ -1352,7 +1352,7 @@ OSS-mixer.
 The PCM20 contains a radio tuner, which is also controlled by
 ACI. This radio tuner is supported by the ACI driver together with the
 miropcm20.o module. Also the 7-band equalizer is integrated
-(limited by the OSS-design). Developement has started and maybe
+(limited by the OSS-design). Development has started and maybe
 finished for the RDS decoder on this card, too. You will be able to
 read RadioText, the Programme Service name, Programme TYpe and
 others. Even the v4l radio module benefits from it with a refined
diff --git a/Documentation/sound/oss/README.ymfsb b/Documentation/sound/oss/README.ymfsb
index af8a7d3a4e8..b6b77906b58 100644
--- a/Documentation/sound/oss/README.ymfsb
+++ b/Documentation/sound/oss/README.ymfsb
@@ -5,7 +5,7 @@ FIRST OF ALL
 ============
 
   This code references YAMAHA's sample codes and data sheets.
-  I respect and thank for all people they made open the informations
+  I respect and thank for all people they made open the information
   about YMF7xx cards.
 
   And this codes heavily based on Jeff Garzik <jgarzik@pobox.com>'s
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 68a4fe3818a..493dada5737 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -143,7 +143,7 @@ configured to use SSPFRM instead.
 NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the
 chipselect is dropped after each spi_transfer.  Most devices need chip select
 asserted around the complete message.  Use SSPFRM as a GPIO (through cs_control)
-to accomodate these chips.
+to accommodate these chips.
 
 
 NSSP SLAVE SAMPLE
diff --git a/Documentation/spi/spi-lm70llp b/Documentation/spi/spi-lm70llp
index 34a9cfd746b..463f6d01fa1 100644
--- a/Documentation/spi/spi-lm70llp
+++ b/Documentation/spi/spi-lm70llp
@@ -46,7 +46,7 @@ The hardware interfacing on the LM70 LLP eval board is as follows:
 
 Note that since the LM70 uses a "3-wire" variant of SPI, the SI/SO pin
 is connected to both pin D7 (as Master Out) and Select (as Master In)
-using an arrangment that lets either the parport or the LM70 pull the
+using an arrangement that lets either the parport or the LM70 pull the
 pin low.  This can't be shared with true SPI devices, but other 3-wire
 devices might share the same SI/SO pin.
 
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index cbd05ffc606..3201a7097e4 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -32,6 +32,17 @@ Table : Subdirectories in /proc/sys/net
 1. /proc/sys/net/core - Network core options
 -------------------------------------------------------
 
+bpf_jit_enable
+--------------
+
+This enables Berkeley Packet Filter Just in Time compiler.
+Currently supported on x86_64 architecture, bpf_jit provides a framework
+to speed packet filtering, the one used by tcpdump/libpcap for example.
+Values :
+	0 - disable the JIT (default value)
+	1 - enable the JIT
+	2 - enable the JIT and ask the compiler to emit traces on kernel log.
+
 rmem_default
 ------------
 
diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt
index 4fb314d5170..db94fb6c567 100644
--- a/Documentation/telephony/ixj.txt
+++ b/Documentation/telephony/ixj.txt
@@ -51,7 +51,7 @@ be removed to protect the rights of others.
 Specifically, very old Internet PhoneJACK cards have non-standard
 G.723.1 codecs (due to the early nature of the DSPs in those days).
 The auto-conversion code to bring those cards into compliance with
-todays standards is available as a binary only module to those people
+today's standards is available as a binary only module to those people
 needing it.  If you bought your card after 1997 or so, you are OK -
 it's only the very old cards that are affected.
 
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
index 6d27ab8d6e9..c83bd6b4e6e 100644
--- a/Documentation/trace/kprobetrace.txt
+++ b/Documentation/trace/kprobetrace.txt
@@ -120,7 +120,6 @@ format:
         field:unsigned char common_flags;       offset:2;       size:1; signed:0;
         field:unsigned char common_preempt_count;       offset:3; size:1;signed:0;
         field:int common_pid;   offset:4;       size:4; signed:1;
-        field:int common_lock_depth;    offset:8;       size:4; signed:1;
 
         field:unsigned long __probe_ip; offset:12;      size:4; signed:0;
         field:int __probe_nargs;        offset:16;      size:4; signed:1;
diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt
index d299ff31df5..7d350b49658 100644
--- a/Documentation/trace/ring-buffer-design.txt
+++ b/Documentation/trace/ring-buffer-design.txt
@@ -237,7 +237,7 @@ with the previous write.
       |written  |
       +---------+
       |written  |
-      +---------+  <--- next positon for write (current commit)
+      +---------+  <--- next position for write (current commit)
       | empty   |
       +---------+
 
diff --git a/Documentation/video4linux/README.pvrusb2 b/Documentation/video4linux/README.pvrusb2
index a747200fe67..2137b589276 100644
--- a/Documentation/video4linux/README.pvrusb2
+++ b/Documentation/video4linux/README.pvrusb2
@@ -172,7 +172,7 @@ Source file list / functional overview:
     to provide a streaming API usable by a read() system call style of
     I/O.  Right now this is the only layer on top of pvrusb2-io.[ch],
     however the underlying architecture here was intended to allow for
-    other styles of I/O to be implemented with additonal modules, like
+    other styles of I/O to be implemented with additional modules, like
     mmap()'ed buffers or something even more exotic.
 
   pvrusb2-main.c - This is the top level of the driver.  Module level
diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
index bbe3ed667d9..14c065fa23e 100644
--- a/Documentation/video4linux/bttv/Insmod-options
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -1,5 +1,5 @@
 
-Note: "modinfo <module>" prints various informations about a kernel
+Note: "modinfo <module>" prints various information about a kernel
 module, among them a complete and up-to-date list of insmod options.
 This list tends to be outdated because it is updated manually ...
 
diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README
index 3a367cdb664..7cbf4fb6cf3 100644
--- a/Documentation/video4linux/bttv/README
+++ b/Documentation/video4linux/bttv/README
@@ -70,7 +70,7 @@ If you have trouble with some specific TV card, try to ask there
 instead of mailing me directly.  The chance that someone with the
 same card listens there is much higher...
 
-For problems with sound:  There are alot of different systems used
+For problems with sound:  There are a lot of different systems used
 for TV sound all over the world.  And there are also different chips
 which decode the audio signal.  Reports about sound problems ("stereo
 does'nt work") are pretty useless unless you include some details
diff --git a/Documentation/video4linux/bttv/README.freeze b/Documentation/video4linux/bttv/README.freeze
index 4259dccc828..5eddfa076cf 100644
--- a/Documentation/video4linux/bttv/README.freeze
+++ b/Documentation/video4linux/bttv/README.freeze
@@ -33,7 +33,7 @@ state is stuck.
 
 I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
 for some people.  Thus probably a small buglet left somewhere in bttv
-0.7.x.  I have no idea where exactly, it works stable for me and alot of
+0.7.x.  I have no idea where exactly, it works stable for me and a lot of
 other people.  But in case you have problems with the 0.7.x versions you
 can give 0.8.x a try ...
 
diff --git a/Documentation/video4linux/bttv/Sound-FAQ b/Documentation/video4linux/bttv/Sound-FAQ
index 1e6328f9108..395f6c6fdd9 100644
--- a/Documentation/video4linux/bttv/Sound-FAQ
+++ b/Documentation/video4linux/bttv/Sound-FAQ
@@ -2,13 +2,13 @@
 bttv and sound mini howto
 =========================
 
-There are alot of different bt848/849/878/879 based boards available.
+There are a lot of different bt848/849/878/879 based boards available.
 Making video work often is not a big deal, because this is handled
 completely by the bt8xx chip, which is common on all boards.  But
 sound is handled in slightly different ways on each board.
 
 To handle the grabber boards correctly, there is a array tvcards[] in
-bttv-cards.c, which holds the informations required for each board.
+bttv-cards.c, which holds the information required for each board.
 Sound will work only, if the correct entry is used (for video it often
 makes no difference).  The bttv driver prints a line to the kernel
 log, telling which card type is used.  Like this one:
diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt
index 1247566c4de..e0cdae49185 100644
--- a/Documentation/video4linux/et61x251.txt
+++ b/Documentation/video4linux/et61x251.txt
@@ -191,10 +191,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only, when only one device
-		is used at the same time. It also shows some more informations
+		is used at the same time. It also shows some more information
 		about the hardware being detected. This module parameter can be
 		changed at runtime thanks to the /sys filesystem interface.
 Default:        2
diff --git a/Documentation/video4linux/pxa_camera.txt b/Documentation/video4linux/pxa_camera.txt
index 4f6d0ca0195..51ed1578b0e 100644
--- a/Documentation/video4linux/pxa_camera.txt
+++ b/Documentation/video4linux/pxa_camera.txt
@@ -84,12 +84,12 @@ DMA usage
        transfer is not started. On "End Of Frame" interrupt, the irq handler
        starts the DMA chain.
      - capture of one videobuffer
-       The DMA chain starts transfering data into videobuffer RAM pages.
-       When all pages are transfered, the DMA irq is raised on "ENDINTR" status
+       The DMA chain starts transferring data into videobuffer RAM pages.
+       When all pages are transferred, the DMA irq is raised on "ENDINTR" status
      - finishing one videobuffer
        The DMA irq handler marks the videobuffer as "done", and removes it from
        the active running queue
-       Meanwhile, the next videobuffer (if there is one), is transfered by DMA
+       Meanwhile, the next videobuffer (if there is one), is transferred by DMA
      - finishing the last videobuffer
        On the DMA irq of the last videobuffer, the QCI is stopped.
 
@@ -101,7 +101,7 @@ DMA usage
 
      This structure is pointed by dma->sg_cpu.
      The descriptors are used as follows :
-      - desc-sg[i]: i-th descriptor, transfering the i-th sg
+      - desc-sg[i]: i-th descriptor, transferring the i-th sg
         element to the video buffer scatter gather
       - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
       - linker: has ddadr= desc-sg[0] of next video buffer, dcmd=0
diff --git a/Documentation/video4linux/sh_mobile_ceu_camera.txt b/Documentation/video4linux/sh_mobile_ceu_camera.txt
index cb47e723af7..1e96ce6e2d2 100644
--- a/Documentation/video4linux/sh_mobile_ceu_camera.txt
+++ b/Documentation/video4linux/sh_mobile_ceu_camera.txt
@@ -37,7 +37,7 @@ Generic scaling / cropping scheme
 -1'-
 
 In the above chart minuses and slashes represent "real" data amounts, points and
-accents represent "useful" data, basically, CEU scaled amd cropped output,
+accents represent "useful" data, basically, CEU scaled and cropped output,
 mapped back onto the client's source plane.
 
 Such a configuration can be produced by user requests:
@@ -65,7 +65,7 @@ Do not touch input rectangle - it is already optimal.
 
 1. Calculate current sensor scales:
 
-	scale_s = ((3') - (3)) / ((2') - (2))
+	scale_s = ((2') - (2)) / ((3') - (3))
 
 2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
 current sensor scales onto input window - this is user S_CROP:
@@ -80,7 +80,7 @@ window:
 4. Calculate sensor output window by applying combined scales to real input
 window:
 
-	width_s_out = ((2') - (2)) / scale_comb
+	width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb
 
 5. Apply iterative sensor S_FMT for sensor output window.
 
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 73de4050d63..b4f67040403 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -214,10 +214,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only. It also shows some more
-		informations about the hardware being detected.
+		information about the hardware being detected.
 		This parameter can be changed at runtime thanks to the /sys
 		filesystem interface.
 Default:        2
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index 3b15608ee07..cf21f7aae97 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -343,7 +343,7 @@ ignored. If you want to check for errors use this:
 	err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
 
 Any error except -ENOIOCTLCMD will exit the loop with that error. If no
-errors (except -ENOIOCTLCMD) occured, then 0 is returned.
+errors (except -ENOIOCTLCMD) occurred, then 0 is returned.
 
 The second argument to both calls is a group ID. If 0, then all subdevs are
 called. If non-zero, then only those whose group ID match that value will
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
index 05138e8aea0..9649450f3b9 100644
--- a/Documentation/video4linux/w9968cf.txt
+++ b/Documentation/video4linux/w9968cf.txt
@@ -413,7 +413,7 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 6:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = configuration or general messages
 		4 = warnings
 		5 = called functions
diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt
index befdfdacdc5..b41c83cf09f 100644
--- a/Documentation/video4linux/zc0301.txt
+++ b/Documentation/video4linux/zc0301.txt
@@ -181,10 +181,10 @@ Syntax:         <n>
 Description:    Debugging information level, from 0 to 3:
 		0 = none (use carefully)
 		1 = critical errors
-		2 = significant informations
+		2 = significant information
 		3 = more verbose messages
 		Level 3 is useful for testing only, when only one device
-		is used at the same time. It also shows some more informations
+		is used at the same time. It also shows some information
 		about the hardware being detected. This module parameter can be
 		changed at runtime thanks to the /sys filesystem interface.
 Default:        2
@@ -261,7 +261,7 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
 
 11. Credits
 ===========
-- Informations about the chip internals needed to enable the I2C protocol have
+- Information about the chip internals needed to enable the I2C protocol have
   been taken from the documentation of the ZC030x Video4Linux1 driver written
   by Andrew Birkett <andy@nobugs.org>;
 - The initialization values of the ZC0301 controller connected to the PAS202BCB
diff --git a/Documentation/virtual/00-INDEX b/Documentation/virtual/00-INDEX
new file mode 100644
index 00000000000..fe0251c4cfb
--- /dev/null
+++ b/Documentation/virtual/00-INDEX
@@ -0,0 +1,10 @@
+Virtualization support in the Linux kernel.
+
+00-INDEX
+	- this file.
+kvm/
+	- Kernel Virtual Machine.  See also http://linux-kvm.org
+lguest/
+	- Extremely simple hypervisor for experimental/educational use.
+uml/
+	- User Mode Linux, builds/runs Linux kernel as a userspace program.
diff --git a/Documentation/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 9bef4e4cec5..9bef4e4cec5 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
diff --git a/Documentation/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt
index 882068538c9..882068538c9 100644
--- a/Documentation/kvm/cpuid.txt
+++ b/Documentation/virtual/kvm/cpuid.txt
diff --git a/Documentation/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt
index 3b4cd3bf563..3b4cd3bf563 100644
--- a/Documentation/kvm/locking.txt
+++ b/Documentation/virtual/kvm/locking.txt
diff --git a/Documentation/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt
index 142cc513665..f46aa58389c 100644
--- a/Documentation/kvm/mmu.txt
+++ b/Documentation/virtual/kvm/mmu.txt
@@ -23,7 +23,7 @@ The mmu code attempts to satisfy the following requirements:
                and framebuffer-based displays
 - footprint:   keep the amount of pinned kernel memory low (most memory
                should be shrinkable)
-- reliablity:  avoid multipage or GFP_ATOMIC allocations
+- reliability:  avoid multipage or GFP_ATOMIC allocations
 
 Acronyms
 ========
diff --git a/Documentation/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt
index d079aed27e0..d079aed27e0 100644
--- a/Documentation/kvm/msr.txt
+++ b/Documentation/virtual/kvm/msr.txt
diff --git a/Documentation/kvm/ppc-pv.txt b/Documentation/virtual/kvm/ppc-pv.txt
index a7f2244b3be..3ab969c5904 100644
--- a/Documentation/kvm/ppc-pv.txt
+++ b/Documentation/virtual/kvm/ppc-pv.txt
@@ -136,7 +136,7 @@ Patched instructions
 ====================
 
 The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions
-respectively on 32 bit systems with an added offset of 4 to accomodate for big
+respectively on 32 bit systems with an added offset of 4 to accommodate for big
 endianness.
 
 The following is a list of mapping the Linux kernel performs when running as
diff --git a/Documentation/kvm/review-checklist.txt b/Documentation/virtual/kvm/review-checklist.txt
index 730475ae1b8..a850986ed68 100644
--- a/Documentation/kvm/review-checklist.txt
+++ b/Documentation/virtual/kvm/review-checklist.txt
@@ -7,7 +7,7 @@ Review checklist for kvm patches
 2.  Patches should be against kvm.git master branch.
 
 3.  If the patch introduces or modifies a new userspace API:
-    - the API must be documented in Documentation/kvm/api.txt
+    - the API must be documented in Documentation/virtual/kvm/api.txt
     - the API must be discoverable using KVM_CHECK_EXTENSION
 
 4.  New state must include support for save/restore.
diff --git a/Documentation/kvm/timekeeping.txt b/Documentation/virtual/kvm/timekeeping.txt
index 0c5033a58c9..df8946377cb 100644
--- a/Documentation/kvm/timekeeping.txt
+++ b/Documentation/virtual/kvm/timekeeping.txt
@@ -81,7 +81,7 @@ Mode 0: Single Timeout.   This is a one-shot software timeout that counts down
  when the gate is high (always true for timers 0 and 1).  When the count
  reaches zero, the output goes high.
 
-Mode 1: Triggered One-shot.  The output is intially set high.  When the gate
+Mode 1: Triggered One-shot.  The output is initially set high.  When the gate
  line is set high, a countdown is initiated (which does not stop if the gate is
  lowered), during which the output is set low.  When the count reaches zero,
  the output goes high.
diff --git a/Documentation/lguest/.gitignore b/Documentation/virtual/lguest/.gitignore
index 115587fd5f6..115587fd5f6 100644
--- a/Documentation/lguest/.gitignore
+++ b/Documentation/virtual/lguest/.gitignore
diff --git a/Documentation/lguest/Makefile b/Documentation/virtual/lguest/Makefile
index bebac6b4f33..bebac6b4f33 100644
--- a/Documentation/lguest/Makefile
+++ b/Documentation/virtual/lguest/Makefile
diff --git a/Documentation/lguest/extract b/Documentation/virtual/lguest/extract
index 7730bb6e4b9..7730bb6e4b9 100644
--- a/Documentation/lguest/extract
+++ b/Documentation/virtual/lguest/extract
diff --git a/Documentation/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c
index d9da7e14853..d9da7e14853 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/virtual/lguest/lguest.c
diff --git a/Documentation/lguest/lguest.txt b/Documentation/virtual/lguest/lguest.txt
index dad99978a6a..bff0c554485 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/virtual/lguest/lguest.txt
@@ -74,7 +74,8 @@ Running Lguest:
 
 - Run an lguest as root:
 
-      Documentation/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 --block=rootfile root=/dev/vda
+      Documentation/virtual/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 \
+        --block=rootfile root=/dev/vda
 
    Explanation:
     64: the amount of memory to use, in MB.
diff --git a/Documentation/uml/UserModeLinux-HOWTO.txt b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
index 9b7e1904db1..9b7e1904db1 100644
--- a/Documentation/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
diff --git a/Documentation/vm/active_mm.txt b/Documentation/vm/active_mm.txt
index 4ee1f643d89..dbf45817405 100644
--- a/Documentation/vm/active_mm.txt
+++ b/Documentation/vm/active_mm.txt
@@ -74,7 +74,7 @@ we have a user context", and is generally done by the page fault handler
 and things like that).
 
 Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago,
-because it slightly changes the interfaces to accomodate the alpha (who
+because it slightly changes the interfaces to accommodate the alpha (who
 would have thought it, but the alpha actually ends up having one of the
 ugliest context switch codes - unlike the other architectures where the MM
 and register state is separate, the alpha PALcode joins the two, and you
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 457634c1e03..f8551b3879f 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -72,7 +72,7 @@ number of huge pages requested.  This is the most reliable method of
 allocating huge pages as memory has not yet become fragmented.
 
 Some platforms support multiple huge page sizes.  To allocate huge pages
-of a specific size, one must preceed the huge pages boot command parameters
+of a specific size, one must precede the huge pages boot command parameters
 with a huge page size selection parameter "hugepagesz=<size>".  <size> must
 be specified in bytes with optional scale suffix [kKmMgG].  The default huge
 page size may be selected with the "default_hugepagesz=<size>" boot parameter.
diff --git a/Documentation/vm/overcommit-accounting b/Documentation/vm/overcommit-accounting
index 21c7b1f8f32..706d7ed9d8d 100644
--- a/Documentation/vm/overcommit-accounting
+++ b/Documentation/vm/overcommit-accounting
@@ -4,7 +4,7 @@ The Linux kernel supports the following overcommit handling modes
 		address space are refused. Used for a typical system. It
 		ensures a seriously wild allocation fails while allowing
 		overcommit to reduce swap usage.  root is allowed to 
-		allocate slighly more memory in this mode. This is the 
+		allocate slightly more memory in this mode. This is the 
 		default.
 
 1	-	Always overcommit. Appropriate for some scientific
diff --git a/Documentation/w1/slaves/w1_ds2423 b/Documentation/w1/slaves/w1_ds2423
index 90a65d23cf5..3f98b505a0e 100644
--- a/Documentation/w1/slaves/w1_ds2423
+++ b/Documentation/w1/slaves/w1_ds2423
@@ -21,8 +21,8 @@ value and associated ram buffer is outpputed to own line.
 
 Each lines will contain the values of 42 bytes read from the counter and
 memory page along the crc=YES or NO for indicating whether the read operation
-was successfull and CRC matched.
-If the operation was successfull, there is also in the end of each line
+was successful and CRC matched.
+If the operation was successful, there is also in the end of each line
 a counter value expressed as an integer after c=
 
 Meaning of 42 bytes represented is following:
@@ -34,7 +34,7 @@ Meaning of 42 bytes represented is following:
  - crc=YES/NO indicating whether read was ok and crc matched
  - c=<int> current counter value
 
-example from the successfull read:
+example from the successful read:
 00 02 00 00 00 00 00 00 00 6d 38 00 ff ff 00 00 fe ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
 00 02 00 00 00 00 00 00 00 e0 1f 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
 00 29 c6 5d 18 00 00 00 00 04 37 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=408798761
diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink
index 804445f745e..f59a31965d5 100644
--- a/Documentation/w1/w1.netlink
+++ b/Documentation/w1/w1.netlink
@@ -81,7 +81,7 @@ which will contain list of all registered master ids in the following
 format:
 
 	cn_msg (CN_W1_IDX.CN_W1_VAL as id, len is equal to sizeof(struct
-	w1_netlink_msg) plus number of masters multipled by 4)
+	w1_netlink_msg) plus number of masters multiplied by 4)
 	w1_netlink_msg (type: W1_LIST_MASTERS, len is equal to
 		number of masters multiplied by 4 (u32 size))
 	id0 ... idN
diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
index 9c24d5ffbb0..9488078900e 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.txt
@@ -8,7 +8,7 @@ Last reviewed: 06/02/2009
  The HP iLO2 NMI Watchdog driver is a kernel module that provides basic
  watchdog functionality and the added benefit of NMI sourcing. Both the
  watchdog functionality and the NMI sourcing capability need to be enabled
- by the user. Remember that the two modes are not dependant on one another.
+ by the user. Remember that the two modes are not dependent on one another.
  A user can have the NMI sourcing without the watchdog timer and vice-versa.
 
  Watchdog functionality is enabled like any other common watchdog driver. That
diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt
index 01c513fac40..a0b577de918 100644
--- a/Documentation/workqueue.txt
+++ b/Documentation/workqueue.txt
@@ -12,6 +12,7 @@ CONTENTS
 4. Application Programming Interface (API)
 5. Example Execution Scenarios
 6. Guidelines
+7. Debugging
 
 
 1. Introduction
@@ -379,3 +380,42 @@ If q1 has WQ_CPU_INTENSIVE set,
 * Unless work items are expected to consume a huge amount of CPU
   cycles, using a bound wq is usually beneficial due to the increased
   level of locality in wq operations and work item execution.
+
+
+7. Debugging
+
+Because the work functions are executed by generic worker threads
+there are a few tricks needed to shed some light on misbehaving
+workqueue users.
+
+Worker threads show up in the process list as:
+
+root      5671  0.0  0.0      0     0 ?        S    12:07   0:00 [kworker/0:1]
+root      5672  0.0  0.0      0     0 ?        S    12:07   0:00 [kworker/1:2]
+root      5673  0.0  0.0      0     0 ?        S    12:12   0:00 [kworker/0:0]
+root      5674  0.0  0.0      0     0 ?        S    12:13   0:00 [kworker/1:0]
+
+If kworkers are going crazy (using too much cpu), there are two types
+of possible problems:
+
+	1. Something beeing scheduled in rapid succession
+	2. A single work item that consumes lots of cpu cycles
+
+The first one can be tracked using tracing:
+
+	$ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event
+	$ cat /sys/kernel/debug/tracing/trace_pipe > out.txt
+	(wait a few secs)
+	^C
+
+If something is busy looping on work queueing, it would be dominating
+the output and the offender can be determined with the work item
+function.
+
+For the second type of problems it should be possible to just check
+the stack trace of the offending worker thread.
+
+	$ cat /proc/THE_OFFENDING_KWORKER/stack
+
+The work item's function should be trivially visible in the stack
+trace.
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
index 092e596a130..c54b4f503e2 100644
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -206,7 +206,7 @@ IOMMU (input/output memory management unit)
       (e.g. because you have < 3 GB memory).
       Kernel boot message: "PCI-DMA: Disabling IOMMU"
 
-   2. <arch/x86_64/kernel/pci-gart.c>: AMD GART based hardware IOMMU.
+   2. <arch/x86/kernel/amd_gart_64.c>: AMD GART based hardware IOMMU.
       Kernel boot message: "PCI-DMA: using GART IOMMU"
 
    3. <arch/x86_64/kernel/pci-swiotlb.c> : Software IOMMU implementation. Used
diff --git a/Documentation/zh_CN/email-clients.txt b/Documentation/zh_CN/email-clients.txt
new file mode 100644
index 00000000000..5d65e323d06
--- /dev/null
+++ b/Documentation/zh_CN/email-clients.txt
@@ -0,0 +1,210 @@
+锘?Chinese translated version of Documentation/email-clients.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Chinese maintainer: Harry Wei <harryxiyou@gmail.com>
+---------------------------------------------------------------------
+Documentation/email-clients.txt ???涓????缈�??
+
+濡??????宠??�烘????存?版???????????瀹癸??璇风?存?ヨ??绯诲?????妗ｇ??�存?よ?????濡????浣?浣跨?ㄨ?辨??
+浜ゆ???????伴?剧??璇?锛?涔????浠ュ??涓???????�存?よ??姹???┿??濡???????缈�????存?�???????舵?????缈?
+璇?瀛???ㄩ??棰?锛?璇疯??绯讳腑??????�存?よ?????
+
+涓???????�存?よ??锛? �惧??濞?  Harry Wei <harryxiyou@gmail.com>
+涓???????缈�?????锛? �惧??濞?  Harry Wei <harryxiyou@gmail.com>
+涓?????????¤?????锛? Yinglin Luan <synmyth@gmail.com>
+		Xiaochen Wang <wangxiaochen0@gmail.com>
+		yaxinsn <yaxinsn@163.com>
+
+浠ヤ??涓烘?ｆ??
+---------------------------------------------------------------------
+
+Linux???浠跺?㈡?风?????缃?淇℃??
+======================================================================
+
+?????????缃?
+----------------------------------------------------------------------
+Linux?????歌ˉ涓???????�????浠惰?????浜ょ??锛????濂芥??�ヤ??浣?涓洪??浠朵????????宓?????????????浜?�存?よ??
+??ユ?堕??浠讹??浣???????浠�?????瀹规?煎??�?璇ユ??"text/plain"?????惰??锛????浠朵????????涓?璧???????锛?
+???涓鸿??浼?浣胯ˉ涓????寮???ㄩ?ㄥ????ㄨ??�鸿??绋?涓???????寰???伴?俱??
+
+??ㄦ?ュ?????Linux?????歌ˉ涓???????浠跺?㈡?风????ㄥ?????�ヤ????跺??璇ュ??浜?????????????濮???舵?????渚?濡?锛?
+浠?浠?涓???芥?瑰?????????????ゅ?惰〃绗???????绌烘?硷???????虫????ㄦ??涓?�????寮?澶存?????�?�俱??
+
+涓?瑕????�?"format=flowed"妯″????????�ヤ?????�???蜂??寮?璧蜂?????棰????浠ュ?????瀹崇?????�????
+
+涓?瑕?�╀????????浠跺?㈡?风??�?�??????ㄦ?㈣?????�???蜂??浼???�??浣????�ヤ?????
+
+???浠跺?㈡?风??涓???芥?瑰???????????瀛?绗????缂??????瑰?????瑕??????????�ヤ???????芥??ASCII??????UTF-8缂??????瑰??锛?
+濡????浣?浣跨??UTF-8缂??????瑰???????????浠讹????ｄ??浣?�?浼???垮??涓?浜??????藉????????瀛?绗???????棰????
+
+???浠跺?㈡?风??�?璇ュ舰???骞朵??淇???? References: ?????? In-Reply-To: ???棰?锛???ｄ??
+???浠惰??棰?��??浼?涓???????
+
+澶???�??甯?(?????????�寸??甯?)???甯�????界?ㄤ??�ヤ??锛????涓哄?惰〃绗?浼?�????涓虹┖??笺??浣跨??xclipboard, xclip
+??????xcutsel涔?�稿??浠ワ??浣???????濂芥??璇?涓?涓?????????垮??浣跨?ㄥ????�??甯????
+
+涓?瑕???ㄤ娇???PGP/GPG缃�????????浠朵腑??????�ヤ?????�???蜂??浣垮??寰?澶???????涓???借?诲??????????ㄤ??浣????�ヤ?????
+锛?�?涓????棰?�?璇ユ?????浠ヤ慨澶????锛?
+
+??ㄧ???????�??浠跺??�ㄥ?????�ヤ??涔????锛?�????宸�?????涓?涓?�ヤ?????涓?涓???????涓绘??锛?淇?瀛???ユ?跺?扮??
+???浠讹??�?�ヤ?????'patch'??戒护???涓?锛?濡??????????浜?锛????�??????�??浠跺??�ㄥ????????
+
+
+涓?浜????浠跺?㈡?风?????绀?
+----------------------------------------------------------------------
+�????�???轰??浜?璇?�????MUA???缃????绀猴?????浠ョ?ㄤ??�?Linux?????稿?????�ヤ?????�?浜?骞朵???????虫??
+?????????�?浠跺?????缃???�?????
+
+璇存??锛?
+TUI = 浠ユ?????涓哄?虹???????ㄦ?锋?ュ??
+GUI = ??惧舰?????㈢?ㄦ?锋?ュ??
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Alpine (TUI)
+
+???缃????椤癸??
+???"Sending Preferences"??ã„¥??é”›?
+
+- "Do Not Send Flowed Text"蹇?椤诲?????
+- "Strip Whitespace Before Sending"蹇?椤诲?抽??
+
+褰???????浠舵?讹????????�?璇ユ?惧?ㄨˉ涓?浼???虹?扮????版?癸????跺?????涓?CTRL-R�???????锛?浣挎??瀹????
+�ヤ?????浠跺????ュ?伴??浠朵腑???
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Evolution (GUI)
+
+涓?浜?寮????????????????浣跨?ㄥ????????�ヤ??
+
+褰??????╅??浠堕??椤癸??Preformat
+  浠?Format->Heading->Preformatted (Ctrl-7)??????宸ュ?锋??
+
+??跺??浣跨??锛?
+  Insert->Text File... (Alt-n x)?????ヨˉ涓????浠躲??
+
+浣?�????浠?"diff -Nru old.c new.c | xclip"锛???????Preformat锛???跺??浣跨?ㄤ腑??撮??�?�?绮?甯????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Kmail (GUI)
+
+涓?浜?寮????????????????浣跨?ㄥ????????�ヤ?????
+
+榛?�よ?剧疆涓?涓?HTML??煎??????????????锛?涓?瑕??????ㄥ?????
+
+褰?涔????涓?�????浠�????跺??锛???ㄩ??椤逛?????涓?瑕??????╄????ㄦ?㈣????????涓????缂虹?瑰氨???浣???ㄩ??浠朵腑�???ョ??浠讳????????
+??戒??浼?�??????ㄦ?㈣??锛????�や??蹇?椤诲?ㄥ?????�ヤ??涔?????????ㄦ?㈣????????绠?????????规??�辨???????ㄨ????ㄦ?㈣????ヤ功??????浠讹??
+??跺?????瀹?淇?瀛?涓鸿??绋裤??涓????浣???ㄨ??绋夸腑???娆℃??寮?瀹?锛?瀹?宸茬????ㄩ?ㄨ????ㄦ?㈣??浜?锛???ｄ??浣???????浠惰?界?舵病???
+?????╄????ㄦ?㈣??锛?浣????�?涓?浼?澶�?诲凡???????????ㄦ?㈣?????
+
+??ㄩ??浠�??�????锛??????ヨˉ涓?涔????锛???�??甯哥?ㄧ??�ヤ??瀹????绗?锛?涓?涓?�?瀛????(---)???
+
+??跺?????"Message"????????＄??锛??????╂????ユ??浠讹????ョ????????浣????�ヤ?????浠躲??�????涓?涓?棰?澶???????椤癸??浣????浠?
+???�?瀹????缃?浣???????浠跺缓绔?宸ュ?锋????????锛?�????浠ュ甫涓?"insert file"??炬?????
+
+浣????浠ュ????ㄥ?伴??�?GPG???�伴??浠讹??浣???????宓?�ヤ?????濂戒??瑕?浣跨??GPG???��??浠????浣?涓哄??宓??????????绛惧??�ヤ??锛?
+褰?浠?GPG涓???????7浣?缂??????朵??浣夸??浠?????????�??澶???????
+
+濡????浣????瑕?浠ラ??浠�??褰㈠????????�ヤ??锛???ｄ??��?抽????瑰?婚??浠讹????跺?????涓?�???�??�????"Suggest automatic
+display"锛?�???峰??宓????浠舵?�?规??�╄?�???????般??
+
+褰?浣?瑕?淇?瀛?�?瑕?????????????宓???????�ヤ??锛?浣????浠ヤ??娑???????�ㄧ????奸????�?????�ヤ????????浠讹????跺????冲?婚?????
+"save as"???浣????浠ヤ娇??ㄤ??涓?娌℃????存?圭????????�ヤ????????浠讹??濡????瀹????浠ユ?ｇ‘???褰㈠??�???????褰?浣?�ｇ????ㄥ??
+???宸辩??�???ｄ??涓?瀵????锛???ｆ?舵病??????椤瑰??浠ヤ??瀛????浠?--宸茬?????涓?涓?�???风??bug�?姹???ュ?�??kmail???bugzilla
+骞朵??甯????�?�?浼?�?澶??????????浠舵??浠ュ?????瀵规??涓???ㄦ?峰??璇诲???????????�?淇?瀛????锛????浠ュ?????浣???虫?????浠跺????跺?�?朵????版?癸??
+浣?涓?寰?涓????浠?浠????????????逛负�?????????翠?????璇汇??
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Lotus Notes (GUI)
+
+涓?瑕?浣跨?ㄥ?????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Mutt (TUI)
+
+寰?澶?Linux寮????浜哄??浣跨??mutt瀹㈡?风??锛????浠ヨ?????瀹????瀹?宸ヤ????????甯告??浜????
+
+Mutt涓????甯?缂?�????锛????浠ヤ??绠′??浣跨?ㄤ??涔?缂?�???ㄩ?戒??�?璇ュ甫????????ㄦ??�????澶у????扮??�???ㄩ?藉甫???
+涓?涓?"insert file"???椤癸??瀹????浠ラ??�?涓???瑰?????浠跺??瀹圭????瑰???????ユ??浠躲??
+
+'vim'浣?涓?mutt???缂?�????锛?
+  set editor="vi"
+
+  濡????浣跨??xclip锛???�?ヤ互涓???戒护
+  :set paste
+  ???涓????涔??????????shift-insert??????浣跨??
+  :r filename
+
+濡??????宠?????�ヤ??浣?涓哄??宓??????????
+(a)ttach宸ヤ?????寰?濂斤??涓?甯????"set paste"???
+
+???缃????椤癸??
+瀹?�?璇ヤ互榛?�よ?剧疆???褰㈠??宸ヤ?????
+??惰??锛????"send_charset"�剧疆涓?"us-ascii::utf-8"涔????涓?涓?涓???????涓绘?????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Pine (TUI)
+
+Pine�???绘??涓?浜?绌烘?煎????????棰?锛?浣????�?浜???�?ㄥ??璇ラ?借??淇?澶?浜????
+
+濡???????浠ワ??璇蜂娇???alpine(pine???�ф?胯??)
+
+???缃????椤癸??
+- ???�?????????????瑕?娑???ゆ??绋???????
+- "no-strip-whitespace-before-send"???椤逛????????瑕???????
+
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Sylpheed (GUI)
+
+- ???宓??????????浠ュ??濂界??宸ヤ??锛???????浣跨?ㄩ??浠讹?????
+- ???��娇??ㄥ????ㄧ??缂?�???ㄣ??
+- 瀵逛?????褰?�?澶???堕??甯告?????
+- 濡???????�?non-SSL�???ワ?????娉?浣跨??TLS SMTP?????????
+- ??ㄧ?????�???ｄ腑???涓?涓?寰??????ㄧ??ruler bar???
+- �???�?????涓?娣诲????�??��??浼?�ｇ‘???浜?瑙ｆ?剧�??????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Thunderbird (GUI)
+
+榛?�ゆ????典??锛?thunderbird寰?瀹规??????????????锛?浣????�????涓?浜???规?????浠ュ己??跺?????寰???�ソ???
+
+- ??ㄧ?ㄦ?峰????疯?剧疆???锛?�???????瀵诲??锛?涓?瑕???????"Compose messages in HTML format"???
+
+- 缂?�?浣????Thunderbird???缃?�剧疆??ヤ娇瀹?涓?瑕????�?浣跨??锛?user_pref("mailnews.wraplength", 0);
+
+- 缂?�?浣????Thunderbird???缃?�剧疆锛?浣垮??涓?瑕?浣跨??"format=flowed"??煎??锛?user_pref("mailnews.
+  send_plaintext_flowed", false);
+
+- 浣????瑕?浣?Thunderbird???涓洪???????煎????瑰??锛?
+  濡????榛?�ゆ????典??浣?涔??????????HTML??煎??锛???ｄ?????寰???俱??浠?浠?浠????棰???????涓????妗?涓???????"Preformat"??煎?????
+  濡????榛?�ゆ????典??浣?涔??????????????????煎??锛?浣?涓?寰????瀹???逛负HTML??煎??锛?浠?浠?浣?涓轰??娆℃?х??锛???ヤ功?????扮??娑????锛?
+  ??跺??寮哄?朵娇瀹??????版???????煎??锛???????瀹?��?????�????瑕?瀹???�??锛???ㄥ??淇＄????炬??涓?浣跨??shift?????ヤ娇瀹????涓?HTML
+  ??煎??锛???跺?????棰???????涓????妗?涓???????"Preformat"??煎?????
+
+- ???��娇??ㄥ????ㄧ??缂?�????锛?
+  ???瀵?Thunderbird???�ヤ?????绠?????????规??�辨??浣跨?ㄤ??涓?"external editor"??�??锛???跺??浣跨?ㄤ????????娆㈢??
+  $EDITOR??ヨ?诲???????????骞惰ˉ涓???版?????涓????瑕?瀹???�??锛????浠ヤ??�藉苟涓?瀹?�?�?涓???�??锛???跺??娣诲??涓?涓?浣跨?ㄥ?????
+  ??????View->Toolbars->Customize...??????褰?浣?涔????淇℃???????跺??浠?浠???瑰?诲??��??浠ヤ?????
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+TkRat (GUI)
+
+???浠ヤ娇??ㄥ?????浣跨??"Insert file..."??????澶???ㄧ??缂?�???ㄣ??
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Gmail (Web GUI)
+
+涓?瑕?浣跨?ㄥ????????�ヤ?????
+
+Gmail缃?椤�?㈡?风???????ㄥ?版????惰〃绗?�????涓虹┖??笺??
+
+??界?跺?惰〃绗?�????涓虹┖??奸??棰????浠ヨ??澶???ㄧ??�???ㄨВ??筹???????跺??�?浼?浣跨?ㄥ??�???㈣?????姣?�???????涓?78涓?瀛?绗????
+
+???涓?涓????棰????Gmail�?浼????浠讳??涓????ASCII???瀛?绗????淇℃????逛负base64缂???????瀹????涓?瑗垮????????娆ф床浜虹?????瀛????
+
+                                ###
diff --git a/MAINTAINERS b/MAINTAINERS
index df5585819a6..49a0bf3a5b9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -151,6 +151,7 @@ S:	Maintained
 F:	drivers/net/hamradio/6pack.c
 
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
+M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -184,10 +185,9 @@ F:	Documentation/filesystems/9p.txt
 F:	fs/9p/
 
 A2232 SERIAL BOARD DRIVER
-M:	Enver Haase <A2232@gmx.net>
 L:	linux-m68k@lists.linux-m68k.org
-S:	Maintained
-F:	drivers/char/ser_a2232*
+S:	Orphan
+F:	drivers/staging/generic_serial/ser_a2232*
 
 AACRAID SCSI RAID DRIVER
 M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
@@ -405,8 +405,8 @@ S:	Maintained
 F:	sound/oss/aedsp16.c
 
 AFFS FILE SYSTEM
-M:	Roman Zippel <zippel@linux-m68k.org>
-S:	Maintained
+L:	linux-fsdevel@vger.kernel.org
+S:	Orphan
 F:	Documentation/filesystems/affs.txt
 F:	fs/affs/
 
@@ -877,6 +877,13 @@ F:	arch/arm/mach-mv78xx0/
 F:	arch/arm/mach-orion5x/
 F:	arch/arm/plat-orion/
 
+ARM/Orion SoC/Technologic Systems TS-78xx platform support
+M:	Alexander Clouter <alex@digriz.org.uk>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W:	http://www.digriz.org.uk/ts78xx/kernel
+S:	Maintained
+F:	arch/arm/mach-orion5x/ts78xx-*
+
 ARM/MIOA701 MACHINE SUPPORT
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1025,12 +1032,13 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c64xx/
 
-ARM/S5P ARM ARCHITECTURES
+ARM/S5P EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-s5p*/
+F:	arch/arm/mach-exynos*/
 
 ARM/SAMSUNG MOBILE MACHINE SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
@@ -1063,7 +1071,7 @@ F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
 
 ARM/TELECHIPS ARM ARCHITECTURE
-M:	"Hans J. Koch" <hjk@linutronix.de>
+M:	"Hans J. Koch" <hjk@hansjkoch.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/plat-tcc/
@@ -1816,11 +1824,10 @@ S:	Maintained
 F:	drivers/platform/x86/compal-laptop.c
 
 COMPUTONE INTELLIPORT MULTIPORT CARD
-M:	"Michael H. Warfield" <mhw@wittsend.com>
 W:	http://www.wittsend.com/computone.html
-S:	Maintained
+S:	Orphan
 F:	Documentation/serial/computone.txt
-F:	drivers/char/ip2/
+F:	drivers/staging/tty/ip2/
 
 CONEXANT ACCESSRUNNER USB DRIVER
 M:	Simon Arlott <cxacru@fire.lp0.eu>
@@ -2003,7 +2010,7 @@ F:	drivers/net/wan/cycx*
 CYCLADES ASYNC MUX DRIVER
 W:	http://www.cyclades.com/
 S:	Orphan
-F:	drivers/char/cyclades.c
+F:	drivers/tty/cyclades.c
 F:	include/linux/cyclades.h
 
 CYCLADES PC300 DRIVER
@@ -2117,8 +2124,8 @@ L:	Eng.Linux@digi.com
 W:	http://www.digi.com
 S:	Orphan
 F:	Documentation/serial/digiepca.txt
-F:	drivers/char/epca*
-F:	drivers/char/digi*
+F:	drivers/staging/tty/epca*
+F:	drivers/staging/tty/digi*
 
 DIOLAN U2C-12 I2C DRIVER
 M:	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -2795,42 +2802,23 @@ GPIO SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
 S:	Maintained
 T:	git git://git.secretlab.ca/git/linux-2.6.git
-F:	Documentation/gpio/gpio.txt
+F:	Documentation/gpio.txt
 F:	drivers/gpio/
 F:	include/linux/gpio*
 
+GRE DEMULTIPLEXER DRIVER
+M:	Dmitry Kozlov <xeb@mail.ru>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/ipv4/gre.c
+F:	include/net/gre.h
+
 GRETH 10/100/1G Ethernet MAC device driver
 M:	Kristoffer Glembo <kristoffer@gaisler.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/greth*
 
-HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-M:	Frank Seidel <frank@f-seidel.de>
-L:	platform-driver-x86@vger.kernel.org
-W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
-S:	Maintained
-F:	drivers/platform/x86/hdaps.c
-
-HWPOISON MEMORY FAILURE HANDLING
-M:	Andi Kleen <andi@firstfloor.org>
-L:	linux-mm@kvack.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
-S:	Maintained
-F:	mm/memory-failure.c
-F:	mm/hwpoison-inject.c
-
-HYPERVISOR VIRTUAL CONSOLE DRIVER
-L:	linuxppc-dev@lists.ozlabs.org
-S:	Odd Fixes
-F:	drivers/tty/hvc/
-
-iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
-M:	Peter Jones <pjones@redhat.com>
-M:	Konrad Rzeszutek Wilk <konrad@kernel.org>
-S:	Maintained
-F:	drivers/firmware/iscsi_ibft*
-
 GSPCA FINEPIX SUBDRIVER
 M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
@@ -2881,6 +2869,26 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/
 
+HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
+M:	Frank Seidel <frank@f-seidel.de>
+L:	platform-driver-x86@vger.kernel.org
+W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
+S:	Maintained
+F:	drivers/platform/x86/hdaps.c
+
+HWPOISON MEMORY FAILURE HANDLING
+M:	Andi Kleen <andi@firstfloor.org>
+L:	linux-mm@kvack.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6.git hwpoison
+S:	Maintained
+F:	mm/memory-failure.c
+F:	mm/hwpoison-inject.c
+
+HYPERVISOR VIRTUAL CONSOLE DRIVER
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Odd Fixes
+F:	drivers/tty/hvc/
+
 HARDWARE MONITORING
 M:	Jean Delvare <khali@linux-fr.org>
 M:	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -2931,8 +2939,8 @@ F:	drivers/block/cciss*
 F:	include/linux/cciss_ioctl.h
 
 HFS FILESYSTEM
-M:	Roman Zippel <zippel@linux-m68k.org>
-S:	Maintained
+L:	linux-fsdevel@vger.kernel.org
+S:	Orphan
 F:	Documentation/filesystems/hfs.txt
 F:	fs/hfs/
 
@@ -3470,6 +3478,12 @@ F:	Documentation/isapnp.txt
 F:	drivers/pnp/isapnp/
 F:	include/linux/isapnp.h
 
+iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
+M:	Peter Jones <pjones@redhat.com>
+M:	Konrad Rzeszutek Wilk <konrad@kernel.org>
+S:	Maintained
+F:	drivers/firmware/iscsi_ibft*
+
 ISCSI
 M:	Mike Christie <michaelc@cs.wisc.edu>
 L:	open-iscsi@googlegroups.com
@@ -3799,7 +3813,7 @@ M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	lguest@lists.ozlabs.org
 W:	http://lguest.ozlabs.org/
 S:	Odd Fixes
-F:	Documentation/lguest/
+F:	Documentation/virtual/lguest/
 F:	arch/x86/lguest/
 F:	drivers/lguest/
 F:	include/linux/lguest*.h
@@ -3986,7 +4000,6 @@ F:	arch/m32r/
 
 M68K ARCHITECTURE
 M:	Geert Uytterhoeven <geert@linux-m68k.org>
-M:	Roman Zippel <zippel@linux-m68k.org>
 L:	linux-m68k@lists.linux-m68k.org
 W:	http://www.linux-m68k.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
@@ -4076,7 +4089,7 @@ F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-M:	"Hans J. Koch" <hjk@linutronix.de>
+M:	"Hans J. Koch" <hjk@hansjkoch.de>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/max6650
@@ -4191,7 +4204,7 @@ MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	Documentation/serial/moxa-smartio
-F:	drivers/char/mxser.*
+F:	drivers/tty/mxser.*
 
 MSI LAPTOP SUPPORT
 M:	"Lee, Chun-Yi" <jlee@novell.com>
@@ -4233,7 +4246,7 @@ F:	sound/oss/msnd*
 
 MULTITECH MULTIPORT CARD (ISICOM)
 S:	Orphan
-F:	drivers/char/isicom.c
+F:	drivers/tty/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
@@ -4371,6 +4384,7 @@ S:	Maintained
 F:	net/ipv4/
 F:	net/ipv6/
 F:	include/net/ip*
+F:	arch/x86/net/*
 
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
 M:	Paul Moore <paul.moore@hp.com>
@@ -4981,6 +4995,13 @@ F:	Documentation/pps/
 F:	drivers/pps/
 F:	include/linux/pps*.h
 
+PPTP DRIVER
+M:	Dmitry Kozlov <xeb@mail.ru>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/pptp.c
+W:	http://sourceforge.net/projects/accel-pptp
+
 PREEMPTIBLE KERNEL
 M:	Robert Love <rml@tech9.net>
 L:	kpreempt-tech@lists.sourceforge.net
@@ -5272,14 +5293,14 @@ F:	drivers/memstick/host/r592.*
 RISCOM8 DRIVER
 S:	Orphan
 F:	Documentation/serial/riscom8.txt
-F:	drivers/char/riscom8*
+F:	drivers/staging/tty/riscom8*
 
 ROCKETPORT DRIVER
 P:	Comtrol Corp.
 W:	http://www.comtrol.com
 S:	Maintained
 F:	Documentation/serial/rocket.txt
-F:	drivers/char/rocket*
+F:	drivers/tty/rocket*
 
 ROSE NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
@@ -5389,7 +5410,7 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Jassi Brar <jassi.brar@samsung.com>
+M:	Jassi Brar <jassisinghbrar@gmail.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/samsung
@@ -5410,6 +5431,7 @@ F:	include/linux/timex.h
 F:	kernel/time/clocksource.c
 F:	kernel/time/time*.c
 F:	kernel/time/ntp.c
+F:	drivers/clocksource
 
 TLG2300 VIDEO4LINUX-2 DRIVER
 M:	Huang Shijie <shijie8@gmail.com>
@@ -5590,9 +5612,9 @@ F:	include/linux/ata.h
 F:	include/linux/libata.h
 
 SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
-M:	Jayamohan Kallickal <jayamohank@serverengines.com>
+M:	Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.serverengines.com
+W:	http://www.emulex.com
 S:	Supported
 F:	drivers/scsi/be2iscsi/
 
@@ -5922,10 +5944,9 @@ F:	arch/arm/mach-spear6xx/spear600.c
 F:	arch/arm/mach-spear6xx/spear600_evb.c
 
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
-M:	Roger Wolff <R.E.Wolff@BitWizard.nl>
-S:	Supported
+S:	Orphan
 F:	Documentation/serial/specialix.txt
-F:	drivers/char/specialix*
+F:	drivers/staging/tty/specialix*
 
 SPI SUBSYSTEM
 M:	David Brownell <dbrownell@users.sourceforge.net>
@@ -5970,7 +5991,6 @@ F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
 M:	Greg Kroah-Hartman <greg@kroah.com>
-M:	Chris Wright <chrisw@sous-sol.org>
 L:	stable@kernel.org
 S:	Maintained
 
@@ -6254,7 +6274,8 @@ M:	Greg Ungerer <gerg@uclinux.org>
 W:	http://www.uclinux.org/
 L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
-F:	arch/m68knommu/
+F:	arch/m68k/*/*_no.*
+F:	arch/m68k/include/asm/*_no.*
 
 UCLINUX FOR RENESAS H8/300 (H8300)
 M:	Yoshinori Sato <ysato@users.sourceforge.jp>
@@ -6556,7 +6577,7 @@ S:	Maintained
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-M:	David Brownell <dbrownell@users.sourceforge.net>
+M:	Oliver Neukum <oneukum@suse.de>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -6618,13 +6639,13 @@ L:	user-mode-linux-devel@lists.sourceforge.net
 L:	user-mode-linux-user@lists.sourceforge.net
 W:	http://user-mode-linux.sourceforge.net
 S:	Maintained
-F:	Documentation/uml/
+F:	Documentation/virtual/uml/
 F:	arch/um/
 F:	fs/hostfs/
 F:	fs/hppfs/
 
 USERSPACE I/O (UIO)
-M:	"Hans J. Koch" <hjk@linutronix.de>
+M:	"Hans J. Koch" <hjk@hansjkoch.de>
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
@@ -6922,6 +6943,25 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
 S:	Maintained
 F:	drivers/platform/x86
 
+XEN HYPERVISOR INTERFACE
+M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
+M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
+L:	virtualization@lists.linux-foundation.org
+S:	Supported
+F:	arch/x86/xen/
+F:	drivers/*/xen-*front.c
+F:	drivers/xen/
+F:	arch/x86/include/asm/xen/
+F:	include/xen/
+
+XEN NETWORK BACKEND DRIVER
+M:	Ian Campbell <ian.campbell@citrix.com>
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/xen-netback/*
+
 XEN PCI SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
@@ -6936,18 +6976,6 @@ S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
-XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
-L:	virtualization@lists.linux-foundation.org
-S:	Supported
-F:	arch/x86/xen/
-F:	drivers/*/xen-*front.c
-F:	drivers/xen/
-F:	arch/x86/include/asm/xen/
-F:	include/xen/
-
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
 M:	Alex Elder <aelder@sgi.com>
@@ -7017,20 +7045,6 @@ M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/tty/serial/zs.*
 
-GRE DEMULTIPLEXER DRIVER
-M:	Dmitry Kozlov <xeb@mail.ru>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	net/ipv4/gre.c
-F:	include/net/gre.h
-
-PPTP DRIVER
-M:	Dmitry Kozlov <xeb@mail.ru>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/pptp.c
-W:	http://sourceforge.net/projects/accel-pptp
-
 THE REST
 M:	Linus Torvalds <torvalds@linux-foundation.org>
 L:	linux-kernel@vger.kernel.org
diff --git a/Makefile b/Makefile
index ba7a55ccd89..a0344a81a89 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 39
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
@@ -1268,6 +1268,7 @@ help:
 	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
 	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
 	@echo  '  make W=1   [targets] Enable extra gcc checks'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
 	@echo  ''
 	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
 	@echo  'For further info see the ./README file'
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index bd4160c5719..9808998cc07 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -12,7 +12,6 @@ config ALPHA
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index 9baae8afe8a..da5449e2217 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -101,7 +101,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
 #define ELF_PLAT_INIT(_r, load_addr)	_r->r0 = 0
 
-/* The registers are layed out in pt_regs for PAL and syscall
+/* The registers are laid out in pt_regs for PAL and syscall
    convenience.  Re-order them for the linear elf_gregset_t.  */
 
 struct pt_regs;
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 058937bf5a7..b1834166922 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -452,10 +452,14 @@
 #define __NR_fanotify_init		494
 #define __NR_fanotify_mark		495
 #define __NR_prlimit64			496
+#define __NR_name_to_handle_at		497
+#define __NR_open_by_handle_at		498
+#define __NR_clock_adjtime		499
+#define __NR_syncfs			500
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			497
+#define NR_SYSCALLS			501
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 9bb7b858ed2..7a6d908bb86 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -4,7 +4,7 @@
 
 extra-y		:= head.o vmlinux.lds
 asflags-y	:= $(KBUILD_CFLAGS)
-ccflags-y	:= -Werror -Wno-sign-compare
+ccflags-y	:= -Wno-sign-compare
 
 obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
index 4843f6ec9f3..cb2801cfd3d 100644
--- a/arch/alpha/kernel/core_lca.c
+++ b/arch/alpha/kernel/core_lca.c
@@ -133,7 +133,7 @@ conf_read(unsigned long addr)
 
 	local_irq_save(flags);
 
-	/* Reset status register to avoid loosing errors.  */
+	/* Reset status register to avoid losing errors.  */
 	stat0 = *(vulp)LCA_IOC_STAT0;
 	*(vulp)LCA_IOC_STAT0 = stat0;
 	mb();
@@ -170,7 +170,7 @@ conf_write(unsigned long addr, unsigned int value)
 
 	local_irq_save(flags);	/* avoid getting hit by machine check */
 
-	/* Reset status register to avoid loosing errors.  */
+	/* Reset status register to avoid losing errors.  */
 	stat0 = *(vulp)LCA_IOC_STAT0;
 	*(vulp)LCA_IOC_STAT0 = stat0;
 	mb();
diff --git a/arch/alpha/kernel/core_mcpcia.c b/arch/alpha/kernel/core_mcpcia.c
index 381fec0af52..da7bcc372f1 100644
--- a/arch/alpha/kernel/core_mcpcia.c
+++ b/arch/alpha/kernel/core_mcpcia.c
@@ -88,7 +88,7 @@ conf_read(unsigned long addr, unsigned char type1,
 {
 	unsigned long flags;
 	unsigned long mid = MCPCIA_HOSE2MID(hose->index);
-	unsigned int stat0, value, temp, cpu;
+	unsigned int stat0, value, cpu;
 
 	cpu = smp_processor_id();
 
@@ -101,7 +101,7 @@ conf_read(unsigned long addr, unsigned char type1,
 	stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
 	*(vuip)MCPCIA_CAP_ERR(mid) = stat0;
 	mb();
-	temp = *(vuip)MCPCIA_CAP_ERR(mid);
+	*(vuip)MCPCIA_CAP_ERR(mid);
 	DBG_CFG(("conf_read: MCPCIA_CAP_ERR(%d) was 0x%x\n", mid, stat0));
 
 	mb();
@@ -136,7 +136,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1,
 {
 	unsigned long flags;
 	unsigned long mid = MCPCIA_HOSE2MID(hose->index);
-	unsigned int stat0, temp, cpu;
+	unsigned int stat0, cpu;
 
 	cpu = smp_processor_id();
 
@@ -145,7 +145,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1,
 	/* Reset status register to avoid losing errors.  */
 	stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
 	*(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb();
-	temp = *(vuip)MCPCIA_CAP_ERR(mid);
+	*(vuip)MCPCIA_CAP_ERR(mid);
 	DBG_CFG(("conf_write: MCPCIA CAP_ERR(%d) was 0x%x\n", mid, stat0));
 
 	draina();
@@ -157,7 +157,7 @@ conf_write(unsigned long addr, unsigned int value, unsigned char type1,
 	*((vuip)addr) = value;
 	mb();
 	mb();  /* magic */
-	temp = *(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */
+	*(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */
 	mcheck_expected(cpu) = 0;
 	mb();
 
@@ -572,12 +572,10 @@ mcpcia_print_system_area(unsigned long la_ptr)
 void
 mcpcia_machine_check(unsigned long vector, unsigned long la_ptr)
 {
-	struct el_common *mchk_header;
 	struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout;
 	unsigned int cpu = smp_processor_id();
 	int expected;
 
-	mchk_header = (struct el_common *)la_ptr;
 	mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr;
 	expected = mcheck_expected(cpu);
 
diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c
index 648ae88aeb8..ae54ad91e18 100644
--- a/arch/alpha/kernel/err_marvel.c
+++ b/arch/alpha/kernel/err_marvel.c
@@ -1027,7 +1027,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
 	 * normal operation, dismiss them.
 	 *
 	 * Dismiss if:
-	 *	C_STAT		= 0x14 		(Error Reponse)
+	 *	C_STAT		= 0x14 		(Error Response)
 	 *	C_STS<3>	= 0    		(C_ADDR valid)
 	 *	C_ADDR<42>	= 1    		(I/O)
 	 *	C_ADDR<31:22>	= 111110xxb	(PCI Config space)
diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c
index c3b3781a03d..14b26c466c8 100644
--- a/arch/alpha/kernel/err_titan.c
+++ b/arch/alpha/kernel/err_titan.c
@@ -533,8 +533,6 @@ static struct el_subpacket_annotation el_titan_annotations[] = {
 static struct el_subpacket *
 el_process_regatta_subpacket(struct el_subpacket *header)
 {
-	int status;
-
 	if (header->class != EL_CLASS__REGATTA_FAMILY) {
 		printk("%s  ** Unexpected header CLASS %d TYPE %d, aborting\n",
 		       err_print_prefix,
@@ -551,7 +549,7 @@ el_process_regatta_subpacket(struct el_subpacket *header)
 		printk("%s  ** Occurred on CPU %d:\n", 
 		       err_print_prefix,
 		       (int)header->by_type.regatta_frame.cpuid);
-		status = privateer_process_logout_frame((struct el_common *)
+		privateer_process_logout_frame((struct el_common *)
 			header->by_type.regatta_frame.data_start, 1);
 		break;
 	default:
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index 1479dc6ebd9..51b7fbd9e4c 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -228,7 +228,7 @@ struct irqaction timer_irqaction = {
 void __init
 init_rtc_irq(void)
 {
-	irq_set_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
+	irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
 				      handle_simple_irq, "RTC");
 	setup_irq(RTC_IRQ, &timer_irqaction);
 }
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index d2634e4476b..edbddcbd5bc 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -1404,8 +1404,6 @@ determine_cpu_caches (unsigned int cpu_type)
 	case PCA56_CPU:
 	case PCA57_CPU:
 	  {
-		unsigned long cbox_config, size;
-
 		if (cpu_type == PCA56_CPU) {
 			L1I = CSHAPE(16*1024, 6, 1);
 			L1D = CSHAPE(8*1024, 5, 1);
@@ -1415,10 +1413,12 @@ determine_cpu_caches (unsigned int cpu_type)
 		}
 		L3 = -1;
 
+#if 0
+		unsigned long cbox_config, size;
+
 		cbox_config = *(vulp) phys_to_virt (0xfffff00008UL);
 		size = 512*1024 * (1 << ((cbox_config >> 12) & 3));
 
-#if 0
 		L2 = ((cbox_config >> 31) & 1 ? CSHAPE (size, 6, 1) : -1);
 #else
 		L2 = external_cache_probe(512*1024, 6);
diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
index 3e6a2893af9..6886b834f48 100644
--- a/arch/alpha/kernel/smc37c93x.c
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -79,7 +79,6 @@
 static unsigned long __init SMCConfigState(unsigned long baseAddr)
 {
 	unsigned char devId;
-	unsigned char devRev;
 
 	unsigned long configPort;
 	unsigned long indexPort;
@@ -100,7 +99,7 @@ static unsigned long __init SMCConfigState(unsigned long baseAddr)
 		devId = inb(dataPort);
 		if (devId == VALID_DEVICE_ID) {
 			outb(DEVICE_REV, indexPort);
-			devRev = inb(dataPort);
+			/* unsigned char devRev = */ inb(dataPort);
 			break;
 		}
 		else
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 42aa078a5e4..5a621c6d22a 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -585,8 +585,7 @@ handle_ipi(struct pt_regs *regs)
 
 		switch (which) {
 		case IPI_RESCHEDULE:
-			/* Reschedule callback.  Everything to be done
-			   is done by the interrupt return path.  */
+			scheduler_ipi();
 			break;
 
 		case IPI_CALL_FUNC:
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
index d3cb28bb8eb..d92cdc715c6 100644
--- a/arch/alpha/kernel/sys_wildfire.c
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -156,7 +156,6 @@ static void __init
 wildfire_init_irq_per_pca(int qbbno, int pcano)
 {
 	int i, irq_bias;
-	unsigned long io_bias;
 	static struct irqaction isa_enable = {
 		.handler	= no_action,
 		.name		= "isa_enable",
@@ -165,10 +164,12 @@ wildfire_init_irq_per_pca(int qbbno, int pcano)
 	irq_bias = qbbno * (WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA)
 		 + pcano * WILDFIRE_IRQ_PER_PCA;
 
+#if 0
+	unsigned long io_bias;
+
 	/* Only need the following for first PCI bus per PCA. */
 	io_bias = WILDFIRE_IO(qbbno, pcano<<1) - WILDFIRE_IO_BIAS;
 
-#if 0
 	outb(0, DMA1_RESET_REG + io_bias);
 	outb(0, DMA2_RESET_REG + io_bias);
 	outb(DMA_MODE_CASCADE, DMA2_MODE_REG + io_bias);
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index a6a1de9db16..15f999d41c7 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -498,23 +498,27 @@ sys_call_table:
 	.quad sys_ni_syscall			/* sys_timerfd */
 	.quad sys_eventfd
 	.quad sys_recvmmsg
-	.quad sys_fallocate				/* 480 */
+	.quad sys_fallocate			/* 480 */
 	.quad sys_timerfd_create
 	.quad sys_timerfd_settime
 	.quad sys_timerfd_gettime
 	.quad sys_signalfd4
-	.quad sys_eventfd2				/* 485 */
+	.quad sys_eventfd2			/* 485 */
 	.quad sys_epoll_create1
 	.quad sys_dup3
 	.quad sys_pipe2
 	.quad sys_inotify_init1
-	.quad sys_preadv				/* 490 */
+	.quad sys_preadv			/* 490 */
 	.quad sys_pwritev
 	.quad sys_rt_tgsigqueueinfo
 	.quad sys_perf_event_open
 	.quad sys_fanotify_init
-	.quad sys_fanotify_mark				/* 495 */
+	.quad sys_fanotify_mark			/* 495 */
 	.quad sys_prlimit64
+	.quad sys_name_to_handle_at
+	.quad sys_open_by_handle_at
+	.quad sys_clock_adjtime
+	.quad sys_syncfs			/* 500 */
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index a58e84f1a63..818e74ed45d 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -153,6 +153,7 @@ void read_persistent_clock(struct timespec *ts)
 		year += 100;
 
 	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = 0;
 }
 
 
@@ -374,8 +375,7 @@ static struct clocksource clocksource_rpcc = {
 
 static inline void register_rpcc_clocksource(long cycle_freq)
 {
-	clocksource_calc_mult_shift(&clocksource_rpcc, cycle_freq, 4);
-	clocksource_register(&clocksource_rpcc);
+	clocksource_register_hz(&clocksource_rpcc, cycle_freq);
 }
 #else /* !CONFIG_SMP */
 static inline void register_rpcc_clocksource(long cycle_freq)
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 433be2a24f3..3d890a98a08 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -46,6 +46,7 @@ SECTIONS
 	__init_end = .;
 	/* Freed after init ends here */
 
+	_sdata = .;	/* Start of rw data section */
 	_data = .;
 	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
diff --git a/arch/alpha/lib/ev67-strrchr.S b/arch/alpha/lib/ev67-strrchr.S
index 3fd8bf414c7..dd0d8c6b9f5 100644
--- a/arch/alpha/lib/ev67-strrchr.S
+++ b/arch/alpha/lib/ev67-strrchr.S
@@ -82,7 +82,7 @@ $loop:
 $eos:
 	negq	t1, t4		# E : isolate first null byte match
 	and	t1, t4, t4	# E :
-	subq	t4, 1, t5	# E : build a mask of the bytes upto...
+	subq	t4, 1, t5	# E : build a mask of the bytes up to...
 	or	t4, t5, t4	# E : ... and including the null
 
 	and	t3, t4, t3	# E : mask out char matches after null
diff --git a/arch/alpha/lib/fls.c b/arch/alpha/lib/fls.c
index 32afaa3fa68..ddd048c0d82 100644
--- a/arch/alpha/lib/fls.c
+++ b/arch/alpha/lib/fls.c
@@ -6,7 +6,7 @@
 #include <linux/bitops.h>
 
 /* This is fls(x)-1, except zero is held to zero.  This allows most
-   efficent input into extbl, plus it allows easy handling of fls(0)=0.  */
+   efficient input into extbl, plus it allows easy handling of fls(0)=0.  */
 
 const unsigned char __flsm1_tab[256] = 
 {
diff --git a/arch/alpha/lib/strrchr.S b/arch/alpha/lib/strrchr.S
index 82cfd0ac907..1970dc07cfd 100644
--- a/arch/alpha/lib/strrchr.S
+++ b/arch/alpha/lib/strrchr.S
@@ -54,7 +54,7 @@ $loop:
 $eos:
 	negq	t1, t4		# e0    : isolate first null byte match
 	and	t1, t4, t4	# e1    :
-	subq	t4, 1, t5	# e0    : build a mask of the bytes upto...
+	subq	t4, 1, t5	# e0    : build a mask of the bytes up to...
 	or	t4, t5, t4	# e1    : ... and including the null
 
 	and	t3, t4, t3	# e0    : mask out char matches after null
diff --git a/arch/alpha/oprofile/op_model_ev67.c b/arch/alpha/oprofile/op_model_ev67.c
index 70302086283..5b9d178e022 100644
--- a/arch/alpha/oprofile/op_model_ev67.c
+++ b/arch/alpha/oprofile/op_model_ev67.c
@@ -192,7 +192,7 @@ ev67_handle_interrupt(unsigned long which, struct pt_regs *regs,
 		case TRAP_INVALID1:
 		case TRAP_INVALID2:
 		case TRAP_INVALID3:
-			/* Pipeline redirection ocurred. PMPC points
+			/* Pipeline redirection occurred. PMPC points
 			   to PALcode. Recognize ITB miss by PALcode
 			   offset address, and get actual PC from
 			   EXC_ADDR.  */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7c0effb69fc..377a7a595b0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -366,6 +366,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select HAVE_SCHED_CLOCK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -693,7 +694,7 @@ config ARCH_S3C2410
 	  the Samsung SMDK2410 development board (and derivatives).
 
 	  Note, the S3C2416 and the S3C2450 are so close that they even share
-	  the same SoC ID code. This means that there is no seperate machine
+	  the same SoC ID code. This means that there is no separate machine
 	  directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
 
 config ARCH_S3C64XX
@@ -1539,7 +1540,6 @@ config HIGHMEM
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem"
 	depends on HIGHMEM
-	depends on !OUTER_CACHE
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
@@ -2011,6 +2011,8 @@ source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
 	depends on !ARCH_S5P64X0 && !ARCH_S5P6442
+	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
+		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y
 
 endmenu
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index 901e6dff843..2cef8e13f9f 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -34,7 +34,7 @@ config PROCESSOR_ID
 	  used instead of the auto-probing which utilizes the register.
 
 config REMAP_VECTORS_TO_RAM
-	bool 'Install vectors to the begining of RAM' if DRAM_BASE
+	bool 'Install vectors to the beginning of RAM' if DRAM_BASE
 	depends on DRAM_BASE
 	help
 	  The kernel needs to change the hardware exception vectors.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 494224a9b45..03d01d783e3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -63,17 +63,6 @@ config DEBUG_USER
 	      8 - SIGSEGV faults
 	     16 - SIGBUS faults
 
-config DEBUG_ERRORS
-	bool "Verbose kernel error messages"
-	depends on DEBUG_KERNEL
-	help
-	  This option controls verbose debugging information which can be
-	  printed when the kernel detects an internal error. This debugging
-	  information is useful to kernel hackers when tracking down problems,
-	  but mostly meaningless to other people. It's safe to say Y unless
-	  you are concerned with the code size or don't want to see these
-	  messages.
-
 config DEBUG_STACK_USAGE
 	bool "Enable stack utilization instrumentation"
 	depends on DEBUG_KERNEL
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 8ebbb511c78..0c6852d9350 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -74,7 +74,7 @@ ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
 ZBSSADDR	:= $(CONFIG_ZBOOT_ROM_BSS)
 else
 ZTEXTADDR	:= 0
-ZBSSADDR	:= ALIGN(4)
+ZBSSADDR	:= ALIGN(8)
 endif
 
 SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 84ac4d65631..49f5b2eaaa8 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -21,20 +21,12 @@
 
 #if defined(CONFIG_DEBUG_ICEDCC)
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
-#elif defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
-		.endm
-		.macro	writeb, ch, rb
-wait:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	wait
-		mcr	p14, 0, \ch, c0, c5, 0
-		.endm
 #elif defined(CONFIG_CPU_XSCALE)
 		.macro	loadsp, rb, tmp
 		.endm
@@ -187,15 +179,14 @@ not_angel:
 		bl	cache_on
 
 restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r5, r6, r9, r11, r12}
-		ldr	sp, [r0, #32]
+		ldmia	r0, {r1, r2, r3, r6, r9, r11, r12}
+		ldr	sp, [r0, #28]
 
 		/*
 		 * We might be running at a different address.  We need
 		 * to fix up various pointers.
 		 */
 		sub	r0, r0, r1		@ calculate the delta offset
-		add	r5, r5, r0		@ _start
 		add	r6, r6, r0		@ _edata
 
 #ifndef CONFIG_ZBOOT_ROM
@@ -214,31 +205,40 @@ restart:	adr	r0, LC0
 /*
  * Check to see if we will overwrite ourselves.
  *   r4  = final kernel address
- *   r5  = start of this image
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
  * We basically want:
- *   r4 >= r10 -> OK
- *   r4 + image length <= r5 -> OK
+ *   r4 - 16k page directory >= r10 -> OK
+ *   r4 + image length <= current position (pc) -> OK
  */
+		add	r10, r10, #16384
 		cmp	r4, r10
 		bhs	wont_overwrite
 		add	r10, r4, r9
-		cmp	r10, r5
+   ARM(		cmp	r10, pc		)
+ THUMB(		mov	lr, pc		)
+ THUMB(		cmp	r10, lr		)
 		bls	wont_overwrite
 
 /*
  * Relocate ourselves past the end of the decompressed kernel.
- *   r5  = start of this image
  *   r6  = _edata
  *   r10 = end of the decompressed kernel
  * Because we always copy ahead, we need to do it from the end and go
  * backward in case the source and destination overlap.
  */
-		/* Round up to next 256-byte boundary. */
-		add	r10, r10, #256
+		/*
+		 * Bump to the next 256-byte boundary with the size of
+		 * the relocation code added. This avoids overwriting
+		 * ourself when the offset is small.
+		 */
+		add	r10, r10, #((reloc_code_end - restart + 256) & ~255)
 		bic	r10, r10, #255
 
+		/* Get start of code we want to copy and align it down. */
+		adr	r5, restart
+		bic	r5, r5, #31
+
 		sub	r9, r6, r5		@ size to copy
 		add	r9, r9, #31		@ rounded up to a multiple
 		bic	r9, r9, #31		@ ... of 32 bytes
@@ -253,6 +253,11 @@ restart:	adr	r0, LC0
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
+#ifndef CONFIG_ZBOOT_ROM
+		/* cache_clean_flush may use the stack, so relocate it */
+		add	sp, sp, r6
+#endif
+
 		bl	cache_clean_flush
 
 		adr	r0, BSYM(restart)
@@ -341,7 +346,6 @@ not_relocated:	mov	r0, #0
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	_start			@ r5
 		.word	_edata			@ r6
 		.word	_image_size		@ r9
 		.word	_got_start		@ r11
@@ -1070,6 +1074,7 @@ memdump:	mov	r12, r0
 #endif
 
 		.ltorg
+reloc_code_end:
 
 		.align
 		.section ".stack", "aw", %nobits
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 4657e877bf8..2df38263124 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -36,7 +36,7 @@ extern void error(char *x);
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 
 static void icedcc_putc(int ch)
 {
@@ -52,16 +52,6 @@ static void icedcc_putc(int ch)
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
 
-#elif defined(CONFIG_CPU_V7)
-
-static void icedcc_putc(int ch)
-{
-	asm(
-	"wait:	mrc	p14, 0, pc, c0, c1, 0			\n\
-		bcs	wait					\n\
-		mcr     p14, 0, %0, c0, c5, 0			"
-	: : "r" (ch));
-}
 
 #elif defined(CONFIG_CPU_XSCALE)
 
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 5309909d728..ea80abe7884 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -54,6 +54,7 @@ SECTIONS
   .bss			: { *(.bss) }
   _end = .;
 
+  . = ALIGN(8);		/* the stack must be 64-bit aligned */
   .stack		: { *(.stack) }
 
   .stab 0		: { *(.stab) }
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e7521bca2c3..6ea9b6f3607 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -16,5 +16,4 @@ obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
-obj-$(CONFIG_COMMON_CLKDEV)	+= clkdev.o
 obj-$(CONFIG_ARM_TIMER_SP804)	+= timer-sp.o
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 8f0f86db360..97912fa4878 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[],
 	unsigned lcnt0, lcnt1, ljmp0, ljmp1;
 	struct _arg_LPEND lpend;
 
-	/* Max iterations possibile in DMALP is 256 */
+	/* Max iterations possible in DMALP is 256 */
 	if (*bursts >= 256*256) {
 		lcnt1 = 256;
 		lcnt0 = 256;
@@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi)
 	}
 
 	for (ev = 0; ev < pi->pcfg.num_events; ev++) {
-		if (val & (1 << ev)) { /* Event occured */
+		if (val & (1 << ev)) { /* Event occurred */
 			struct pl330_thread *thrd;
 			u32 inten = readl(regs + INTEN);
 			int active;
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 113085a7712..7aa4262ada7 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,17 +22,16 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-#if defined(CONFIG_PM)
+#ifdef CONFIG_PM
 /**
  * struct vic_device - VIC PM device
- * @sysdev: The system device which is registered.
  * @irq: The IRQ number for the base of the VIC.
  * @base: The register base for the VIC.
  * @resume_sources: A bitmask of interrupts for resume.
@@ -43,8 +42,6 @@
  * @protect: Save for VIC_PROTECT.
  */
 struct vic_device {
-	struct sys_device sysdev;
-
 	void __iomem	*base;
 	int		irq;
 	u32		resume_sources;
@@ -59,11 +56,6 @@ struct vic_device {
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
 static int vic_id;
-
-static inline struct vic_device *to_vic(struct sys_device *sys)
-{
-	return container_of(sys, struct vic_device, sysdev);
-}
 #endif /* CONFIG_PM */
 
 /**
@@ -85,10 +77,9 @@ static void vic_init2(void __iomem *base)
 	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 }
 
-#if defined(CONFIG_PM)
-static int vic_class_resume(struct sys_device *dev)
+#ifdef CONFIG_PM
+static void resume_one_vic(struct vic_device *vic)
 {
-	struct vic_device *vic = to_vic(dev);
 	void __iomem *base = vic->base;
 
 	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
@@ -107,13 +98,18 @@ static int vic_class_resume(struct sys_device *dev)
 
 	writel(vic->soft_int, base + VIC_INT_SOFT);
 	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+}
 
-	return 0;
+static void vic_resume(void)
+{
+	int id;
+
+	for (id = vic_id - 1; id >= 0; id--)
+		resume_one_vic(vic_devices + id);
 }
 
-static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+static void suspend_one_vic(struct vic_device *vic)
 {
-	struct vic_device *vic = to_vic(dev);
 	void __iomem *base = vic->base;
 
 	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
@@ -128,14 +124,21 @@ static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
 
 	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
 	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static int vic_suspend(void)
+{
+	int id;
+
+	for (id = 0; id < vic_id; id++)
+		suspend_one_vic(vic_devices + id);
 
 	return 0;
 }
 
-struct sysdev_class vic_class = {
-	.name		= "vic",
-	.suspend	= vic_class_suspend,
-	.resume		= vic_class_resume,
+struct syscore_ops vic_syscore_ops = {
+	.suspend	= vic_suspend,
+	.resume		= vic_resume,
 };
 
 /**
@@ -147,30 +150,8 @@ struct sysdev_class vic_class = {
 */
 static int __init vic_pm_init(void)
 {
-	struct vic_device *dev = vic_devices;
-	int err;
-	int id;
-
-	if (vic_id == 0)
-		return 0;
-
-	err = sysdev_class_register(&vic_class);
-	if (err) {
-		printk(KERN_ERR "%s: cannot register class\n", __func__);
-		return err;
-	}
-
-	for (id = 0; id < vic_id; id++, dev++) {
-		dev->sysdev.id = id;
-		dev->sysdev.cls = &vic_class;
-
-		err = sysdev_register(&dev->sysdev);
-		if (err) {
-			printk(KERN_ERR "%s: failed to register device\n",
-			       __func__);
-			return err;
-		}
-	}
+	if (vic_id > 0)
+		register_syscore_ops(&vic_syscore_ops);
 
 	return 0;
 }
diff --git a/arch/arm/configs/at91x40_defconfig b/arch/arm/configs/at91x40_defconfig
new file mode 100644
index 00000000000..c55e9212fcb
--- /dev/null
+++ b/arch/arm/configs/at91x40_defconfig
@@ -0,0 +1,48 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91X40=y
+CONFIG_MACH_AT91EB01=y
+CONFIG_AT91_EARLY_USART0=y
+CONFIG_CPU_ARM7TDMI=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x01000000
+CONFIG_DRAM_SIZE=0x00400000
+CONFIG_FLASH_MEM_BASE=0x01400000
+CONFIG_PROCESSOR_ID=0x14000040
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index ed5bc9e05a4..cd4458f6417 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -2,6 +2,7 @@
 #define __ASM_ARM_CPUTYPE_H
 
 #include <linux/stringify.h>
+#include <linux/kernel.h>
 
 #define CPUID_ID	0
 #define CPUID_CACHETYPE	1
diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h
index ee5e03efc1b..3ad4c10d0d8 100644
--- a/arch/arm/include/asm/fpstate.h
+++ b/arch/arm/include/asm/fpstate.h
@@ -18,7 +18,7 @@
  * VFP storage area has:
  *  - FPEXC, FPSCR, FPINST and FPINST2.
  *  - 16 or 32 double precision data registers
- *  - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6)
+ *  - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6)
  * 
  *  FPEXC will always be non-zero once the VFP has been used in this process.
  */
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
index c7afbc552c7..7e30874377e 100644
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -126,7 +126,7 @@
 #endif
 
 #if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
+#error Unknown cache maintenance model
 #endif
 
 #ifndef MULTI_CACHE
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index 0ec35d1698a..fbf71d75ec8 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -10,8 +10,8 @@
  *
  *  This file provides the glue to stick the processor-specific bits
  *  into the kernel in an efficient manner.  The idea is to use branches
- *  when we're only targetting one class of TLB, or indirect calls
- *  when we're targetting multiple classes of TLBs.
+ *  when we're only targeting one class of TLB, or indirect calls
+ *  when we're targeting multiple classes of TLBs.
  */
 #ifdef __KERNEL__
 
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index f35b86e68dd..e4a04e4e562 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -16,7 +16,7 @@
  * make it not entierly compatible with the PL080 specification from
  * ARM. When in doubt, check the Samsung documentation first.
  *
- * The Samsung defines are PL080S, and add an extra controll register,
+ * The Samsung defines are PL080S, and add an extra control register,
  * the ability to move more than 2^11 counts of data and some extra
  * OneNAND features.
 */
diff --git a/arch/arm/include/asm/i8253.h b/arch/arm/include/asm/i8253.h
new file mode 100644
index 00000000000..70656b69d5c
--- /dev/null
+++ b/arch/arm/include/asm/i8253.h
@@ -0,0 +1,15 @@
+#ifndef __ASMARM_I8253_H
+#define __ASMARM_I8253_H
+
+/* i8253A PIT registers */
+#define PIT_MODE	0x43
+#define PIT_CH0		0x40
+
+#define PIT_LATCH	((PIT_TICK_RATE + HZ / 2) / HZ)
+
+extern raw_spinlock_t i8253_lock;
+
+#define outb_pit	outb_p
+#define inb_pit		inb_p
+
+#endif
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index bb8a19bd582..e46bdd0097e 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -39,10 +39,13 @@ typedef u32 kprobe_opcode_t;
 struct kprobe;
 typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
 
+typedef unsigned long (kprobe_check_cc)(unsigned long);
+
 /* Architecture specific copy of original instruction. */
 struct arch_specific_insn {
 	kprobe_opcode_t		*insn;
 	kprobe_insn_handler_t	*insn_handler;
+	kprobe_check_cc		*insn_check_cc;
 };
 
 struct prev_kprobe {
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 883f6be5117..d5adaae5ee2 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -34,7 +34,6 @@
  *   timer interrupt which may be pending.
  */
 struct sys_timer {
-	struct sys_device	dev;
 	void			(*init)(void);
 	void			(*suspend)(void);
 	void			(*resume)(void);
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 833306ee9e7..ea297ac70bc 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -20,8 +20,6 @@ struct pxa2xx_udc_mach_info {
 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
-	bool	gpio_vbus_inverted;
-	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
 	int	gpio_pullup;			/* high == pullup activated */
 };
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 9a87823642d..832888d0c20 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -159,7 +159,7 @@ extern unsigned int user_debug;
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
 #define mb()		do { dsb(); outer_sync(); } while (0)
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		mb()
 #else
 #include <asm/memory.h>
@@ -249,7 +249,7 @@ do {									\
  * cache totally.  This means that the cache becomes inconsistent, and,
  * since we use normal loads/stores as well, this is really bad.
  * Typically, this causes oopsen in filp_close, but could have other,
- * more disasterous effects.  There are two work-arounds:
+ * more disastrous effects.  There are two work-arounds:
  *  1. Disable interrupts and emulate the atomic swap
  *  2. Clean the cache, perform atomic swap, flush the cache
  *
diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h
index c4391ba2035..1dc98067589 100644
--- a/arch/arm/include/asm/thread_notify.h
+++ b/arch/arm/include/asm/thread_notify.h
@@ -43,6 +43,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread)
 #define THREAD_NOTIFY_FLUSH	0
 #define THREAD_NOTIFY_EXIT	1
 #define THREAD_NOTIFY_SWITCH	2
+#define THREAD_NOTIFY_COPY	3
 
 #endif
 #endif
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
index 47f023aa849..14749aec94b 100644
--- a/arch/arm/include/asm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
@@ -47,7 +47,7 @@ struct crunch_sigframe {
 #endif
 
 #ifdef CONFIG_IWMMXT
-/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */
+/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */
 #define IWMMXT_MAGIC		0x12ef842a
 #define IWMMXT_STORAGE_SIZE	(IWMMXT_SIZE + 8)
 
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index c891eb76c0e..87dbe3e2197 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -396,6 +396,10 @@
 #define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
 #define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
 #define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
+#define __NR_name_to_handle_at		(__NR_SYSCALL_BASE+370)
+#define __NR_open_by_handle_at		(__NR_SYSCALL_BASE+371)
+#define __NR_clock_adjtime		(__NR_SYSCALL_BASE+372)
+#define __NR_syncfs			(__NR_SYSCALL_BASE+373)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 74554f1742d..8d95446150a 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
-obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM_SLEEP)		+= sleep.o
 obj-$(CONFIG_HAVE_SCHED_CLOCK)	+= sched_clock.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 5c26eccef99..7fbf28c35bb 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -379,6 +379,10 @@
 		CALL(sys_fanotify_init)
 		CALL(sys_fanotify_mark)
 		CALL(sys_prlimit64)
+/* 370 */	CALL(sys_name_to_handle_at)
+		CALL(sys_open_by_handle_at)
+		CALL(sys_clock_adjtime)
+		CALL(sys_syncfs)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index d2d983be096..bcd66e00bdb 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -25,7 +25,7 @@
 		.macro	addruart, rp, rv
 		.endm
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c0, c5, 0
@@ -49,23 +49,6 @@
 1002:
 		.endm
 
-#elif defined(CONFIG_CPU_V7)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c0, c5, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-busy:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	busy
-		.endm
-
-		.macro	waituart, rd, rx
-wait:		mrc	p14, 0, pc, c0, c1, 0
-		bcs	wait
-
-		.endm
-
 #elif defined(CONFIG_CPU_XSCALE)
 
 		.macro	senduart, rd, rx
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index d4a0da1e48f..9b05c6a0dce 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -40,15 +40,22 @@ EXPORT_SYMBOL(elf_check_arch);
 void elf_set_personality(const struct elf32_hdr *x)
 {
 	unsigned int eflags = x->e_flags;
-	unsigned int personality = PER_LINUX_32BIT;
+	unsigned int personality = current->personality & ~PER_MASK;
+
+	/*
+	 * We only support Linux ELF executables, so always set the
+	 * personality to LINUX.
+	 */
+	personality |= PER_LINUX;
 
 	/*
 	 * APCS-26 is only valid for OABI executables
 	 */
-	if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
-		if (eflags & EF_ARM_APCS_26)
-			personality = PER_LINUX;
-	}
+	if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN &&
+	    (eflags & EF_ARM_APCS_26))
+		personality &= ~ADDR_LIMIT_32BIT;
+	else
+		personality |= ADDR_LIMIT_32BIT;
 
 	set_personality(personality);
 
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 052b509e2d5..1bec8b5f22f 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -338,7 +338,7 @@ static struct miscdevice etb_miscdev = {
 	.fops = &etb_fops,
 };
 
-static int __init etb_probe(struct amba_device *dev, const struct amba_id *id)
+static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
@@ -530,7 +530,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
 static struct kobj_attribute trace_mode_attr =
 	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
 
-static int __init etm_probe(struct amba_device *dev, const struct amba_id *id)
+static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 8dbc126f715..87acc25d7a3 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -868,6 +868,13 @@ static void reset_ctrl_regs(void *info)
 		 */
 		asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
 		isb();
+
+		/*
+		 * Clear any configured vector-catch events before
+		 * enabling monitor mode.
+		 */
+		asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+		isb();
 	}
 
 	if (enable_monitor_mode())
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 8f6ed43861f..15eeff6aea0 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -34,9 +34,6 @@
  *
  *   *) If the PC is written to by the instruction, the
  *      instruction must be fully simulated in software.
- *      If it is a conditional instruction, the handler
- *      will use insn[0] to copy its condition code to
- *	set r0 to 1 and insn[1] to "mov pc, lr" to return.
  *
  *   *) Otherwise, a modified form of the instruction is
  *      directly executed.  Its handler calls the
@@ -68,13 +65,17 @@
 
 #define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
 
+#define is_r15(insn, bitpos) (((insn) & (0xf << bitpos)) == (0xf << bitpos))
+
+/*
+ * Test if load/store instructions writeback the address register.
+ * if P (bit 24) == 0 or W (bit 21) == 1
+ */
+#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
+
 #define PSR_fs	(PSR_f|PSR_s)
 
 #define KPROBE_RETURN_INSTRUCTION	0xe1a0f00e	/* mov pc, lr */
-#define SET_R0_TRUE_INSTRUCTION		0xe3a00001	/* mov	r0, #1 */
-
-#define	truecc_insn(insn)	(((insn) & 0xf0000000) | \
-				 (SET_R0_TRUE_INSTRUCTION & 0x0fffffff))
 
 typedef long (insn_0arg_fn_t)(void);
 typedef long (insn_1arg_fn_t)(long);
@@ -419,14 +420,10 @@ insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
 
 static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
 {
-	insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
 	long iaddr = (long)p->addr;
 	int disp  = branch_displacement(insn);
 
-	if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
-		return;
-
 	if (insn & (1 << 24))
 		regs->ARM_lr = iaddr + 4;
 
@@ -446,14 +443,10 @@ static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
 
 static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
 {
-	insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
 	int rm = insn & 0xf;
 	long rmv = regs->uregs[rm];
 
-	if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
-		return;
-
 	if (insn & (1 << 5))
 		regs->ARM_lr = (long)p->addr + 4;
 
@@ -463,9 +456,16 @@ static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
 		regs->ARM_cpsr |= PSR_T_BIT;
 }
 
+static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs)
+{
+	kprobe_opcode_t insn = p->opcode;
+	int rd = (insn >> 12) & 0xf;
+	unsigned long mask = 0xf8ff03df; /* Mask out execution state */
+	regs->uregs[rd] = regs->ARM_cpsr & mask;
+}
+
 static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
 {
-	insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
 	int rn = (insn >> 16) & 0xf;
 	int lbit = insn & (1 << 20);
@@ -476,9 +476,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
 	int reg_bit_vector;
 	int reg_count;
 
-	if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
-		return;
-
 	reg_count = 0;
 	reg_bit_vector = insn & 0xffff;
 	while (reg_bit_vector) {
@@ -510,11 +507,6 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
 
 static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
 {
-	insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
-
-	if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
-		return;
-
 	regs->ARM_pc = (long)p->addr + str_pc_offset;
 	simulate_ldm1stm1(p, regs);
 	regs->ARM_pc = (long)p->addr + 4;
@@ -525,24 +517,16 @@ static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
 	regs->uregs[12] = regs->uregs[13];
 }
 
-static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs)
-{
-	insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
-	kprobe_opcode_t insn = p->opcode;
-	int rn = (insn >> 16) & 0xf;
-	long rnv = regs->uregs[rn];
-
-	/* Save Rn in case of writeback. */
-	regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
-}
-
 static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
 {
 	insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
+	long ppc = (long)p->addr + 8;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;  /* rm may be invalid, don't care. */
+	long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+	long rnv = (rn == 15) ? ppc : regs->uregs[rn];
 
 	/* Not following the C calling convention here, so need asm(). */
 	__asm__ __volatile__ (
@@ -554,29 +538,36 @@ static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
 		"str	r0, %[rn]	\n\t"	/* in case of writeback */
 		"str	r2, %[rd0]	\n\t"
 		"str	r3, %[rd1]	\n\t"
-		: [rn]  "+m" (regs->uregs[rn]),
+		: [rn]  "+m" (rnv),
 		  [rd0] "=m" (regs->uregs[rd]),
 		  [rd1] "=m" (regs->uregs[rd+1])
-		: [rm]   "m" (regs->uregs[rm]),
+		: [rm]   "m" (rmv),
 		  [cpsr] "r" (regs->ARM_cpsr),
 		  [i_fn] "r" (i_fn)
 		: "r0", "r1", "r2", "r3", "lr", "cc"
 	);
+	if (is_writeback(insn))
+		regs->uregs[rn] = rnv;
 }
 
 static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs)
 {
 	insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
+	long ppc = (long)p->addr + 8;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm  = insn & 0xf;
-	long rnv = regs->uregs[rn];
-	long rmv = regs->uregs[rm];  /* rm/rmv may be invalid, don't care. */
+	long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+	/* rm/rmv may be invalid, don't care. */
+	long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+	long rnv_wb;
 
-	regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
+	rnv_wb = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
 					       regs->uregs[rd+1],
 					       regs->ARM_cpsr, i_fn);
+	if (is_writeback(insn))
+		regs->uregs[rn] = rnv_wb;
 }
 
 static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
@@ -594,7 +585,8 @@ static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
 	long cpsr = regs->ARM_cpsr;
 
 	fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
-	regs->uregs[rn] = fnr.r0;  /* Save Rn in case of writeback. */
+	if (rn != 15)
+		regs->uregs[rn] = fnr.r0;  /* Save Rn in case of writeback. */
 	rdv = fnr.r1;
 
 	if (rd == 15) {
@@ -622,35 +614,11 @@ static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs)
 	long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd];
 	long rnv = (rn == 15) ? iaddr +  8 : regs->uregs[rn];
 	long rmv = regs->uregs[rm];  /* rm/rmv may be invalid, don't care. */
+	long rnv_wb;
 
-	/* Save Rn in case of writeback. */
-	regs->uregs[rn] =
-		insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
-{
-	insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0];
-	kprobe_opcode_t insn = p->opcode;
-	union reg_pair fnr;
-	int rd = (insn >> 12) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-
-	fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn);
-	regs->uregs[rn] = fnr.r0;
-	regs->uregs[rd] = fnr.r1;
-}
-
-static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs)
-{
-	insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 12) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	long rnv = regs->uregs[rn];
-	long rdv = regs->uregs[rd];
-
-	insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn);
+	rnv_wb = insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+	if (rn != 15)
+		regs->uregs[rn] = rnv_wb;  /* Save Rn in case of writeback. */
 }
 
 static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs)
@@ -686,32 +654,32 @@ static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs)
 	insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
 }
 
-static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes emulate_nop(struct kprobe *p, struct pt_regs *regs)
 {
-	insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 12) & 0xf;
-
-	regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
 }
 
-static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes
+emulate_rd12_modify(struct kprobe *p, struct pt_regs *regs)
 {
 	insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
-	int ird = (insn >> 12) & 0xf;
+	int rd = (insn >> 12) & 0xf;
+	long rdv = regs->uregs[rd];
 
-	insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn);
+	regs->uregs[rd] = insnslot_1arg_rflags(rdv, regs->ARM_cpsr, i_fn);
 }
 
-static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes
+emulate_rd12rn0_modify(struct kprobe *p, struct pt_regs *regs)
 {
-	insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+	insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
-	int rn = (insn >> 16) & 0xf;
+	int rd = (insn >> 12) & 0xf;
+	int rn = insn & 0xf;
+	long rdv = regs->uregs[rd];
 	long rnv = regs->uregs[rn];
 
-	insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+	regs->uregs[rd] = insnslot_2arg_rflags(rdv, rnv, regs->ARM_cpsr, i_fn);
 }
 
 static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs)
@@ -817,6 +785,17 @@ emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs)
 }
 
 static void __kprobes
+emulate_alu_tests_imm(struct kprobe *p, struct pt_regs *regs)
+{
+	insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+	kprobe_opcode_t insn = p->opcode;
+	int rn = (insn >> 16) & 0xf;
+	long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+	insnslot_1arg_rwflags(rnv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
 emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs)
 {
 	insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
@@ -852,14 +831,34 @@ emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs)
 		insnslot_3arg_rwflags(rnv, rmv, rsv, &regs->ARM_cpsr, i_fn);
 }
 
+static void __kprobes
+emulate_alu_tests(struct kprobe *p, struct pt_regs *regs)
+{
+	insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+	kprobe_opcode_t insn = p->opcode;
+	long ppc = (long)p->addr + 8;
+	int rn = (insn >> 16) & 0xf;
+	int rs = (insn >> 8) & 0xf;	/* rs/rsv may be invalid, don't care. */
+	int rm = insn & 0xf;
+	long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+	long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+	long rsv = regs->uregs[rs];
+
+	insnslot_3arg_rwflags(rnv, rmv, rsv, &regs->ARM_cpsr, i_fn);
+}
+
 static enum kprobe_insn __kprobes
 prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
-	int ibit = (insn & (1 << 26)) ? 25 : 22;
+	int not_imm = (insn & (1 << 26)) ? (insn & (1 << 25))
+					 : (~insn & (1 << 22));
+
+	if (is_writeback(insn) && is_r15(insn, 16))
+		return INSN_REJECTED;	/* Writeback to PC */
 
 	insn &= 0xfff00fff;
 	insn |= 0x00001000;	/* Rn = r0, Rd = r1 */
-	if (insn & (1 << ibit)) {
+	if (not_imm) {
 		insn &= ~0xf;
 		insn |= 2;	/* Rm = r2 */
 	}
@@ -869,20 +868,40 @@ prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 }
 
 static enum kprobe_insn __kprobes
-prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+prep_emulate_rd12_modify(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
-	insn &= 0xffff0ff0;	/* Rd = r0, Rm = r0 */
+	if (is_r15(insn, 12))
+		return INSN_REJECTED;	/* Rd is PC */
+
+	insn &= 0xffff0fff;	/* Rd = r0 */
 	asi->insn[0] = insn;
-	asi->insn_handler = emulate_rd12rm0;
+	asi->insn_handler = emulate_rd12_modify;
 	return INSN_GOOD;
 }
 
 static enum kprobe_insn __kprobes
-prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+prep_emulate_rd12rn0_modify(kprobe_opcode_t insn,
+			    struct arch_specific_insn *asi)
 {
-	insn &= 0xffff0fff;	/* Rd = r0 */
+	if (is_r15(insn, 12))
+		return INSN_REJECTED;	/* Rd is PC */
+
+	insn &= 0xffff0ff0;	/* Rd = r0 */
+	insn |= 0x00000001;	/* Rn = r1 */
+	asi->insn[0] = insn;
+	asi->insn_handler = emulate_rd12rn0_modify;
+	return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+	if (is_r15(insn, 12))
+		return INSN_REJECTED;	/* Rd is PC */
+
+	insn &= 0xffff0ff0;	/* Rd = r0, Rm = r0 */
 	asi->insn[0] = insn;
-	asi->insn_handler = emulate_rd12;
+	asi->insn_handler = emulate_rd12rm0;
 	return INSN_GOOD;
 }
 
@@ -890,6 +909,9 @@ static enum kprobe_insn __kprobes
 prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn,
 				struct arch_specific_insn *asi)
 {
+	if (is_r15(insn, 12))
+		return INSN_REJECTED;	/* Rd is PC */
+
 	insn &= 0xfff00ff0;	/* Rd = r0, Rn = r0 */
 	insn |= 0x00000001;	/* Rm = r1 */
 	asi->insn[0] = insn;
@@ -901,6 +923,9 @@ static enum kprobe_insn __kprobes
 prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn,
 			       struct arch_specific_insn *asi)
 {
+	if (is_r15(insn, 16))
+		return INSN_REJECTED;	/* Rd is PC */
+
 	insn &= 0xfff0f0f0;	/* Rd = r0, Rs = r0 */
 	insn |= 0x00000001;	/* Rm = r1          */
 	asi->insn[0] = insn;
@@ -912,6 +937,9 @@ static enum kprobe_insn __kprobes
 prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn,
 				   struct arch_specific_insn *asi)
 {
+	if (is_r15(insn, 16))
+		return INSN_REJECTED;	/* Rd is PC */
+
 	insn &= 0xfff000f0;	/* Rd = r0, Rn = r0 */
 	insn |= 0x00000102;	/* Rs = r1, Rm = r2 */
 	asi->insn[0] = insn;
@@ -923,6 +951,9 @@ static enum kprobe_insn __kprobes
 prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
 				       struct arch_specific_insn *asi)
 {
+	if (is_r15(insn, 16) || is_r15(insn, 12))
+		return INSN_REJECTED;	/* RdHi or RdLo is PC */
+
 	insn &= 0xfff000f0;	/* RdHi = r0, RdLo = r1 */
 	insn |= 0x00001203;	/* Rs = r2, Rm = r3 */
 	asi->insn[0] = insn;
@@ -943,20 +974,13 @@ prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
 static enum kprobe_insn __kprobes
 space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
-	/* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */
-	/* RFE           : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */
-	/* SRS           : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */
-	if ((insn & 0xfff30020) == 0xf1020000 ||
-	    (insn & 0xfe500f00) == 0xf8100a00 ||
-	    (insn & 0xfe5f0f00) == 0xf84d0500)
-		return INSN_REJECTED;
-
-	/* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */
-	if ((insn & 0xfd700000) == 0xf4500000) {
-		insn &= 0xfff0ffff;	/* Rn = r0 */
-		asi->insn[0] = insn;
-		asi->insn_handler = emulate_rn16;
-		return INSN_GOOD;
+	/* memory hint : 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx : */
+	/* PLDI        : 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx : */
+	/* PLDW        : 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx : */
+	/* PLD         : 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx : */
+	if ((insn & 0xfe300000) == 0xf4100000) {
+		asi->insn_handler = emulate_nop;
+		return INSN_GOOD_NO_SLOT;
 	}
 
 	/* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */
@@ -965,41 +989,22 @@ space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 		return INSN_GOOD_NO_SLOT;
 	}
 
-	/* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
-	/* CDP2   : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
-	if ((insn & 0xffff00f0) == 0xf1010000 ||
-	    (insn & 0xff000010) == 0xfe000000) {
-		asi->insn[0] = insn;
-		asi->insn_handler = emulate_none;
-		return INSN_GOOD;
-	}
+	/* CPS   : 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */
+	/* SETEND: 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
+
+	/* SRS   : 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
+	/* RFE   : 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
 
+	/* Coprocessor instructions... */
 	/* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
 	/* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
-	if ((insn & 0xffe00000) == 0xfc400000) {
-		insn &= 0xfff00fff;	/* Rn = r0 */
-		insn |= 0x00001000;	/* Rd = r1 */
-		asi->insn[0] = insn;
-		asi->insn_handler =
-			(insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
-		return INSN_GOOD;
-	}
+	/* LDC2  : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+	/* STC2  : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+	/* CDP2  : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+	/* MCR2  : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+	/* MRC2  : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
 
-	/* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
-	/* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
-	if ((insn & 0xfe000000) == 0xfc000000) {
-		insn &= 0xfff0ffff;      /* Rn = r0 */
-		asi->insn[0] = insn;
-		asi->insn_handler = emulate_ldcstc;
-		return INSN_GOOD;
-	}
-
-	/* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
-	/* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
-	insn &= 0xffff0fff;	/* Rd = r0 */
-	asi->insn[0]      = insn;
-	asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
-	return INSN_GOOD;
+	return INSN_REJECTED;
 }
 
 static enum kprobe_insn __kprobes
@@ -1008,19 +1013,18 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	/* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */
 	if ((insn & 0x0f900010) == 0x01000000) {
 
-		/* BXJ  : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
-		/* MSR  : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
-		if ((insn & 0x0ff000f0) == 0x01200020 ||
-		    (insn & 0x0fb000f0) == 0x01200000)
-			return INSN_REJECTED;
-
-		/* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */
-		if ((insn & 0x0fb00010) == 0x01000000)
-			return prep_emulate_rd12(insn, asi);
+		/* MRS cpsr : cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */
+		if ((insn & 0x0ff000f0) == 0x01000000) {
+			if (is_r15(insn, 12))
+				return INSN_REJECTED;	/* Rd is PC */
+			asi->insn_handler = simulate_mrs;
+			return INSN_GOOD_NO_SLOT;
+		}
 
 		/* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
 		if ((insn & 0x0ff00090) == 0x01400080)
-			return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+			return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn,
+									asi);
 
 		/* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
 		/* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
@@ -1029,24 +1033,29 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 			return prep_emulate_rd16rs8rm0_wflags(insn, asi);
 
 		/* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */
-		/* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */
-		return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+		/* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx : Q */
+		if ((insn & 0x0ff00090) == 0x01000080 ||
+		    (insn & 0x0ff000b0) == 0x01200080)
+			return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
 
+		/* BXJ      : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
+		/* MSR      : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
+		/* MRS spsr : cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */
+
+		/* Other instruction encodings aren't yet defined */
+		return INSN_REJECTED;
 	}
 
 	/* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */
 	else if ((insn & 0x0f900090) == 0x01000010) {
 
-		/* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
-		if ((insn & 0xfff000f0) == 0xe1200070)
-			return INSN_REJECTED;
-
 		/* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
 		/* BX     : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
 		if ((insn & 0x0ff000d0) == 0x01200010) {
-			asi->insn[0] = truecc_insn(insn);
+			if ((insn & 0x0ff000ff) == 0x0120003f)
+				return INSN_REJECTED; /* BLX pc */
 			asi->insn_handler = simulate_blx2bx;
-			return INSN_GOOD;
+			return INSN_GOOD_NO_SLOT;
 		}
 
 		/* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
@@ -1057,17 +1066,27 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 		/* QSUB    : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */
 		/* QDADD   : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */
 		/* QDSUB   : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */
-		return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+		if ((insn & 0x0f9000f0) == 0x01000050)
+			return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+
+		/* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+		/* SMC  : cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */
+
+		/* Other instruction encodings aren't yet defined */
+		return INSN_REJECTED;
 	}
 
 	/* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */
-	else if ((insn & 0x0f000090) == 0x00000090) {
+	else if ((insn & 0x0f0000f0) == 0x00000090) {
 
 		/* MUL    : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx :   */
 		/* MULS   : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */
 		/* MLA    : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx :   */
 		/* MLAS   : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */
 		/* UMAAL  : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx :   */
+		/* undef  : cccc 0000 0101 xxxx xxxx xxxx 1001 xxxx :   */
+		/* MLS    : cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx :   */
+		/* undef  : cccc 0000 0111 xxxx xxxx xxxx 1001 xxxx :   */
 		/* UMULL  : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx :   */
 		/* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */
 		/* UMLAL  : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx :   */
@@ -1076,13 +1095,15 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 		/* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */
 		/* SMLAL  : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx :   */
 		/* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */
-		if ((insn & 0x0fe000f0) == 0x00000090) {
-		       return prep_emulate_rd16rs8rm0_wflags(insn, asi);
-		} else if  ((insn & 0x0fe000f0) == 0x00200090) {
-		       return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
-		} else {
-		       return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
-		}
+		if ((insn & 0x00d00000) == 0x00500000)
+			return INSN_REJECTED;
+		else if ((insn & 0x00e00000) == 0x00000000)
+			return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+		else if ((insn & 0x00a00000) == 0x00200000)
+			return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+		else
+			return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn,
+									asi);
 	}
 
 	/* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */
@@ -1090,23 +1111,45 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 
 		/* SWP   : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */
 		/* SWPB  : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */
-		/* LDRD  : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
-		/* STRD  : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
+		/* ???   : cccc 0001 0x01 xxxx xxxx xxxx 1001 xxxx */
+		/* ???   : cccc 0001 0x10 xxxx xxxx xxxx 1001 xxxx */
+		/* ???   : cccc 0001 0x11 xxxx xxxx xxxx 1001 xxxx */
 		/* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */
 		/* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */
+		/* STREXD: cccc 0001 1010 xxxx xxxx xxxx 1001 xxxx */
+		/* LDREXD: cccc 0001 1011 xxxx xxxx xxxx 1001 xxxx */
+		/* STREXB: cccc 0001 1100 xxxx xxxx xxxx 1001 xxxx */
+		/* LDREXB: cccc 0001 1101 xxxx xxxx xxxx 1001 xxxx */
+		/* STREXH: cccc 0001 1110 xxxx xxxx xxxx 1001 xxxx */
+		/* LDREXH: cccc 0001 1111 xxxx xxxx xxxx 1001 xxxx */
+
+		/* LDRD  : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
+		/* STRD  : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
 		/* LDRH  : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */
 		/* STRH  : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */
 		/* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */
 		/* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */
-		if ((insn & 0x0fb000f0) == 0x01000090) {
-			/* SWP/SWPB */
-			return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+		if ((insn & 0x0f0000f0) == 0x01000090) {
+			if ((insn & 0x0fb000f0) == 0x01000090) {
+				/* SWP/SWPB */
+				return prep_emulate_rd12rn16rm0_wflags(insn,
+									asi);
+			} else {
+				/* STREX/LDREX variants and unallocaed space */
+				return INSN_REJECTED;
+			}
+
 		} else if ((insn & 0x0e1000d0) == 0x00000d0) {
 			/* STRD/LDRD */
+			if ((insn & 0x0000e000) == 0x0000e000)
+				return INSN_REJECTED;	/* Rd is LR or PC */
+			if (is_writeback(insn) && is_r15(insn, 16))
+				return INSN_REJECTED;	/* Writeback to PC */
+
 			insn &= 0xfff00fff;
 			insn |= 0x00002000;	/* Rn = r0, Rd = r2 */
-			if (insn & (1 << 22)) {
-				/* I bit */
+			if (!(insn & (1 << 22))) {
+				/* Register index */
 				insn &= ~0xf;
 				insn |= 1;	/* Rm = r1 */
 			}
@@ -1116,6 +1159,9 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 			return INSN_GOOD;
 		}
 
+		/* LDRH/STRH/LDRSB/LDRSH */
+		if (is_r15(insn, 12))
+			return INSN_REJECTED;	/* Rd is PC */
 		return prep_emulate_ldr_str(insn, asi);
 	}
 
@@ -1123,7 +1169,7 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 
 	/*
 	 * ALU op with S bit and Rd == 15 :
-	 * 	cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
+	 *	cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
 	 */
 	if ((insn & 0x0e10f000) == 0x0010f000)
 		return INSN_REJECTED;
@@ -1152,22 +1198,61 @@ space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 		insn |= 0x00000200;     /* Rs = r2 */
 	}
 	asi->insn[0] = insn;
-	asi->insn_handler = (insn & (1 << 20)) ?  /* S-bit */
+
+	if ((insn & 0x0f900000) == 0x01100000) {
+		/*
+		 * TST : cccc 0001 0001 xxxx xxxx xxxx xxxx xxxx
+		 * TEQ : cccc 0001 0011 xxxx xxxx xxxx xxxx xxxx
+		 * CMP : cccc 0001 0101 xxxx xxxx xxxx xxxx xxxx
+		 * CMN : cccc 0001 0111 xxxx xxxx xxxx xxxx xxxx
+		 */
+		asi->insn_handler = emulate_alu_tests;
+	} else {
+		/* ALU ops which write to Rd */
+		asi->insn_handler = (insn & (1 << 20)) ?  /* S-bit */
 				emulate_alu_rwflags : emulate_alu_rflags;
+	}
 	return INSN_GOOD;
 }
 
 static enum kprobe_insn __kprobes
 space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
+	/* MOVW  : cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */
+	/* MOVT  : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */
+	if ((insn & 0x0fb00000) == 0x03000000)
+		return prep_emulate_rd12_modify(insn, asi);
+
+	/* hints : cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */
+	if ((insn & 0x0fff0000) == 0x03200000) {
+		unsigned op2 = insn & 0x000000ff;
+		if (op2 == 0x01 || op2 == 0x04) {
+			/* YIELD : cccc 0011 0010 0000 xxxx xxxx 0000 0001 */
+			/* SEV   : cccc 0011 0010 0000 xxxx xxxx 0000 0100 */
+			asi->insn[0] = insn;
+			asi->insn_handler = emulate_none;
+			return INSN_GOOD;
+		} else if (op2 <= 0x03) {
+			/* NOP   : cccc 0011 0010 0000 xxxx xxxx 0000 0000 */
+			/* WFE   : cccc 0011 0010 0000 xxxx xxxx 0000 0010 */
+			/* WFI   : cccc 0011 0010 0000 xxxx xxxx 0000 0011 */
+			/*
+			 * We make WFE and WFI true NOPs to avoid stalls due
+			 * to missing events whilst processing the probe.
+			 */
+			asi->insn_handler = emulate_nop;
+			return INSN_GOOD_NO_SLOT;
+		}
+		/* For DBG and unallocated hints it's safest to reject them */
+		return INSN_REJECTED;
+	}
+
 	/*
 	 * MSR   : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
-	 * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
 	 * ALU op with S bit and Rd == 15 :
 	 *	   cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
 	 */
 	if ((insn & 0x0fb00000) == 0x03200000 ||	/* MSR */
-	    (insn & 0x0ff00000) == 0x03400000 ||	/* Undef */
 	    (insn & 0x0e10f000) == 0x0210f000)		/* ALU s-bit, R15  */
 		return INSN_REJECTED;
 
@@ -1178,10 +1263,22 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	 * *S (bit 20) updates condition codes
 	 * ADC/SBC/RSC reads the C flag
 	 */
-	insn &= 0xffff0fff;	/* Rd = r0 */
+	insn &= 0xfff00fff;	/* Rn = r0 and Rd = r0 */
 	asi->insn[0] = insn;
-	asi->insn_handler = (insn & (1 << 20)) ?  /* S-bit */
+
+	if ((insn & 0x0f900000) == 0x03100000) {
+		/*
+		 * TST : cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx
+		 * TEQ : cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx
+		 * CMP : cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx
+		 * CMN : cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx
+		 */
+		asi->insn_handler = emulate_alu_tests_imm;
+	} else {
+		/* ALU ops which write to Rd */
+		asi->insn_handler = (insn & (1 << 20)) ?  /* S-bit */
 			emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
+	}
 	return INSN_GOOD;
 }
 
@@ -1190,6 +1287,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
 	/* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */
 	if ((insn & 0x0ff000f0) == 0x068000b0) {
+		if (is_r15(insn, 12))
+			return INSN_REJECTED;	/* Rd is PC */
 		insn &= 0xfff00ff0;	/* Rd = r0, Rn = r0 */
 		insn |= 0x00000001;	/* Rm = r1 */
 		asi->insn[0] = insn;
@@ -1203,6 +1302,8 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	/* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */
 	if ((insn & 0x0fa00030) == 0x06a00010 ||
 	    (insn & 0x0fb000f0) == 0x06a00030) {
+		if (is_r15(insn, 12))
+			return INSN_REJECTED;	/* Rd is PC */
 		insn &= 0xffff0ff0;	/* Rd = r0, Rm = r0 */
 		asi->insn[0] = insn;
 		asi->insn_handler = emulate_sat;
@@ -1211,57 +1312,101 @@ space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 
 	/* REV    : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
 	/* REV16  : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
+	/* RBIT   : cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */
 	/* REVSH  : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
 	if ((insn & 0x0ff00070) == 0x06b00030 ||
-	    (insn & 0x0ff000f0) == 0x06f000b0)
+	    (insn & 0x0ff00070) == 0x06f00030)
 		return prep_emulate_rd12rm0(insn, asi);
 
+	/* ???       : cccc 0110 0000 xxxx xxxx xxxx xxx1 xxxx :   */
 	/* SADD16    : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */
 	/* SADDSUBX  : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */
 	/* SSUBADDX  : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */
 	/* SSUB16    : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */
 	/* SADD8     : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */
+	/* ???       : cccc 0110 0001 xxxx xxxx xxxx 1011 xxxx :   */
+	/* ???       : cccc 0110 0001 xxxx xxxx xxxx 1101 xxxx :   */
 	/* SSUB8     : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */
 	/* QADD16    : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx :   */
 	/* QADDSUBX  : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx :   */
 	/* QSUBADDX  : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx :   */
 	/* QSUB16    : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx :   */
 	/* QADD8     : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx :   */
+	/* ???       : cccc 0110 0010 xxxx xxxx xxxx 1011 xxxx :   */
+	/* ???       : cccc 0110 0010 xxxx xxxx xxxx 1101 xxxx :   */
 	/* QSUB8     : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx :   */
 	/* SHADD16   : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx :   */
 	/* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx :   */
 	/* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx :   */
 	/* SHSUB16   : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx :   */
 	/* SHADD8    : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx :   */
+	/* ???       : cccc 0110 0011 xxxx xxxx xxxx 1011 xxxx :   */
+	/* ???       : cccc 0110 0011 xxxx xxxx xxxx 1101 xxxx :   */
 	/* SHSUB8    : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx :   */
+	/* ???       : cccc 0110 0100 xxxx xxxx xxxx xxx1 xxxx :   */
 	/* UADD16    : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */
 	/* UADDSUBX  : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */
 	/* USUBADDX  : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */
 	/* USUB16    : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */
 	/* UADD8     : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */
+	/* ???       : cccc 0110 0101 xxxx xxxx xxxx 1011 xxxx :   */
+	/* ???       : cccc 0110 0101 xxxx xxxx xxxx 1101 xxxx :   */
 	/* USUB8     : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */
 	/* UQADD16   : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx :   */
 	/* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx :   */
 	/* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx :   */
 	/* UQSUB16   : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx :   */
 	/* UQADD8    : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx :   */
+	/* ???       : cccc 0110 0110 xxxx xxxx xxxx 1011 xxxx :   */
+	/* ???       : cccc 0110 0110 xxxx xxxx xxxx 1101 xxxx :   */
 	/* UQSUB8    : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx :   */
 	/* UHADD16   : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx :   */
 	/* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx :   */
 	/* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx :   */
 	/* UHSUB16   : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx :   */
 	/* UHADD8    : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx :   */
+	/* ???       : cccc 0110 0111 xxxx xxxx xxxx 1011 xxxx :   */
+	/* ???       : cccc 0110 0111 xxxx xxxx xxxx 1101 xxxx :   */
 	/* UHSUB8    : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx :   */
+	if ((insn & 0x0f800010) == 0x06000010) {
+		if ((insn & 0x00300000) == 0x00000000 ||
+		    (insn & 0x000000e0) == 0x000000a0 ||
+		    (insn & 0x000000e0) == 0x000000c0)
+			return INSN_REJECTED;	/* Unallocated space */
+		return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+	}
+
 	/* PKHBT     : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx :   */
 	/* PKHTB     : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx :   */
+	if ((insn & 0x0ff00030) == 0x06800010)
+		return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+
 	/* SXTAB16   : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx :   */
-	/* SXTB      : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx :   */
+	/* SXTB16    : cccc 0110 1000 1111 xxxx xxxx 0111 xxxx :   */
+	/* ???       : cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx :   */
 	/* SXTAB     : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx :   */
+	/* SXTB      : cccc 0110 1010 1111 xxxx xxxx 0111 xxxx :   */
 	/* SXTAH     : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx :   */
+	/* SXTH      : cccc 0110 1011 1111 xxxx xxxx 0111 xxxx :   */
 	/* UXTAB16   : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx :   */
+	/* UXTB16    : cccc 0110 1100 1111 xxxx xxxx 0111 xxxx :   */
+	/* ???       : cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx :   */
 	/* UXTAB     : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx :   */
+	/* UXTB      : cccc 0110 1110 1111 xxxx xxxx 0111 xxxx :   */
 	/* UXTAH     : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx :   */
-	return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+	/* UXTH      : cccc 0110 1111 1111 xxxx xxxx 0111 xxxx :   */
+	if ((insn & 0x0f8000f0) == 0x06800070) {
+		if ((insn & 0x00300000) == 0x00100000)
+			return INSN_REJECTED;	/* Unallocated space */
+
+		if ((insn & 0x000f0000) == 0x000f0000)
+			return prep_emulate_rd12rm0(insn, asi);
+		else
+			return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+	}
+
+	/* Other instruction encodings aren't yet defined */
+	return INSN_REJECTED;
 }
 
 static enum kprobe_insn __kprobes
@@ -1271,29 +1416,49 @@ space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	if ((insn & 0x0ff000f0) == 0x03f000f0)
 		return INSN_REJECTED;
 
-	/* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
-	/* USAD8  : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
-	if ((insn & 0x0ff000f0) == 0x07800010)
-		 return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
-
 	/* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
 	/* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
 	if ((insn & 0x0ff00090) == 0x07400010)
 		return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
 
 	/* SMLAD  : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */
+	/* SMUAD  : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
 	/* SMLSD  : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */
+	/* SMUSD  : cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx :  */
 	/* SMMLA  : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx :  */
-	/* SMMLS  : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx :  */
+	/* SMMUL  : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx :  */
+	/* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx :  */
+	/* USAD8  : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx :  */
 	if ((insn & 0x0ff00090) == 0x07000010 ||
 	    (insn & 0x0ff000d0) == 0x07500010 ||
-	    (insn & 0x0ff000d0) == 0x075000d0)
+	    (insn & 0x0ff000f0) == 0x07800010) {
+
+		if ((insn & 0x0000f000) == 0x0000f000)
+			return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+		else
+			return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+	}
+
+	/* SMMLS  : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx :  */
+	if ((insn & 0x0ff000d0) == 0x075000d0)
 		return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
 
-	/* SMUSD  : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :  */
-	/* SMUAD  : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
-	/* SMMUL  : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx :  */
-	return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+	/* SBFX   : cccc 0111 101x xxxx xxxx xxxx x101 xxxx :  */
+	/* UBFX   : cccc 0111 111x xxxx xxxx xxxx x101 xxxx :  */
+	if ((insn & 0x0fa00070) == 0x07a00050)
+		return prep_emulate_rd12rm0(insn, asi);
+
+	/* BFI    : cccc 0111 110x xxxx xxxx xxxx x001 xxxx :  */
+	/* BFC    : cccc 0111 110x xxxx xxxx xxxx x001 1111 :  */
+	if ((insn & 0x0fe00070) == 0x07c00010) {
+
+		if ((insn & 0x0000000f) == 0x0000000f)
+			return prep_emulate_rd12_modify(insn, asi);
+		else
+			return prep_emulate_rd12rn0_modify(insn, asi);
+	}
+
+	return INSN_REJECTED;
 }
 
 static enum kprobe_insn __kprobes
@@ -1307,6 +1472,10 @@ space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	/* STRB  : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */
 	/* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
 	/* STRT  : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
+
+	if ((insn & 0x00500000) == 0x00500000 && is_r15(insn, 12))
+		return INSN_REJECTED;	/* LDRB into PC */
+
 	return prep_emulate_ldr_str(insn, asi);
 }
 
@@ -1321,10 +1490,9 @@ space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 
 	/* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
 	/* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
-	asi->insn[0] = truecc_insn(insn);
 	asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */
 				simulate_stm1_pc : simulate_ldm1stm1;
-	return INSN_GOOD;
+	return INSN_GOOD_NO_SLOT;
 }
 
 static enum kprobe_insn __kprobes
@@ -1332,58 +1500,117 @@ space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
 	/* B  : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
 	/* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
-	asi->insn[0] = truecc_insn(insn);
 	asi->insn_handler = simulate_bbl;
-	return INSN_GOOD;
+	return INSN_GOOD_NO_SLOT;
 }
 
 static enum kprobe_insn __kprobes
-space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+space_cccc_11xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
+	/* Coprocessor instructions... */
 	/* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
 	/* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
-	insn &= 0xfff00fff;
-	insn |= 0x00001000;	/* Rn = r0, Rd = r1 */
-	asi->insn[0] = insn;
-	asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
-	return INSN_GOOD;
+	/* LDC  : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+	/* STC  : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+	/* CDP  : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+	/* MCR  : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+	/* MRC  : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+
+	/* SVC  : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
+
+	return INSN_REJECTED;
 }
 
-static enum kprobe_insn __kprobes
-space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static unsigned long __kprobes __check_eq(unsigned long cpsr)
 {
-	/* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
-	/* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
-	insn &= 0xfff0ffff;	/* Rn = r0 */
-	asi->insn[0] = insn;
-	asi->insn_handler = emulate_ldcstc;
-	return INSN_GOOD;
+	return cpsr & PSR_Z_BIT;
 }
 
-static enum kprobe_insn __kprobes
-space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+static unsigned long __kprobes __check_ne(unsigned long cpsr)
 {
-	/* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
-	/* SWI  : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
-	if ((insn & 0xfff000f0) == 0xe1200070 ||
-	    (insn & 0x0f000000) == 0x0f000000)
-		return INSN_REJECTED;
+	return (~cpsr) & PSR_Z_BIT;
+}
 
-	/* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
-	if ((insn & 0x0f000010) == 0x0e000000) {
-		asi->insn[0] = insn;
-		asi->insn_handler = emulate_none;
-		return INSN_GOOD;
-	}
+static unsigned long __kprobes __check_cs(unsigned long cpsr)
+{
+	return cpsr & PSR_C_BIT;
+}
 
-	/* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
-	/* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
-	insn &= 0xffff0fff;	/* Rd = r0 */
-	asi->insn[0] = insn;
-	asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
-	return INSN_GOOD;
+static unsigned long __kprobes __check_cc(unsigned long cpsr)
+{
+	return (~cpsr) & PSR_C_BIT;
 }
 
+static unsigned long __kprobes __check_mi(unsigned long cpsr)
+{
+	return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_pl(unsigned long cpsr)
+{
+	return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_vs(unsigned long cpsr)
+{
+	return cpsr & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_vc(unsigned long cpsr)
+{
+	return (~cpsr) & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_hi(unsigned long cpsr)
+{
+	cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+	return cpsr & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ls(unsigned long cpsr)
+{
+	cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+	return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ge(unsigned long cpsr)
+{
+	cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+	return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_lt(unsigned long cpsr)
+{
+	cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+	return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_gt(unsigned long cpsr)
+{
+	unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+	temp |= (cpsr << 1);			 /* PSR_N_BIT |= PSR_Z_BIT */
+	return (~temp) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_le(unsigned long cpsr)
+{
+	unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+	temp |= (cpsr << 1);			 /* PSR_N_BIT |= PSR_Z_BIT */
+	return temp & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_al(unsigned long cpsr)
+{
+	return true;
+}
+
+static kprobe_check_cc * const condition_checks[16] = {
+	&__check_eq, &__check_ne, &__check_cs, &__check_cc,
+	&__check_mi, &__check_pl, &__check_vs, &__check_vc,
+	&__check_hi, &__check_ls, &__check_ge, &__check_lt,
+	&__check_gt, &__check_le, &__check_al, &__check_al
+};
+
 /* Return:
  *   INSN_REJECTED     If instruction is one not allowed to kprobe,
  *   INSN_GOOD         If instruction is supported and uses instruction slot,
@@ -1399,133 +1626,45 @@ space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 enum kprobe_insn __kprobes
 arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
+	asi->insn_check_cc = condition_checks[insn>>28];
 	asi->insn[1] = KPROBE_RETURN_INSTRUCTION;
 
-	if ((insn & 0xf0000000) == 0xf0000000) {
+	if ((insn & 0xf0000000) == 0xf0000000)
 
 		return space_1111(insn, asi);
 
-	} else if ((insn & 0x0e000000) == 0x00000000) {
+	else if ((insn & 0x0e000000) == 0x00000000)
 
 		return space_cccc_000x(insn, asi);
 
-	} else if ((insn & 0x0e000000) == 0x02000000) {
+	else if ((insn & 0x0e000000) == 0x02000000)
 
 		return space_cccc_001x(insn, asi);
 
-	} else if ((insn & 0x0f000010) == 0x06000010) {
+	else if ((insn & 0x0f000010) == 0x06000010)
 
 		return space_cccc_0110__1(insn, asi);
 
-	} else if ((insn & 0x0f000010) == 0x07000010) {
+	else if ((insn & 0x0f000010) == 0x07000010)
 
 		return space_cccc_0111__1(insn, asi);
 
-	} else if ((insn & 0x0c000000) == 0x04000000) {
+	else if ((insn & 0x0c000000) == 0x04000000)
 
 		return space_cccc_01xx(insn, asi);
 
-	} else if ((insn & 0x0e000000) == 0x08000000) {
+	else if ((insn & 0x0e000000) == 0x08000000)
 
 		return space_cccc_100x(insn, asi);
 
-	} else if ((insn & 0x0e000000) == 0x0a000000) {
+	else if ((insn & 0x0e000000) == 0x0a000000)
 
 		return space_cccc_101x(insn, asi);
 
-	} else if ((insn & 0x0fe00000) == 0x0c400000) {
-
-		return space_cccc_1100_010x(insn, asi);
-
-	} else if ((insn & 0x0e000000) == 0x0c000000) {
-
-		return space_cccc_110x(insn, asi);
-
-	}
-
-	return space_cccc_111x(insn, asi);
+	return space_cccc_11xx(insn, asi);
 }
 
 void __init arm_kprobe_decode_init(void)
 {
 	find_str_pc_offset();
 }
-
-
-/*
- * All ARM instructions listed below.
- *
- * Instructions and their general purpose registers are given.
- * If a particular register may not use R15, it is prefixed with a "!".
- * If marked with a "*" means the value returned by reading R15
- * is implementation defined.
- *
- * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ
- *     TST: Rd, Rn, Rm, !Rs
- * BX: Rm
- * BLX(2): !Rm
- * BX: Rm (R15 legal, but discouraged)
- * BXJ: !Rm,
- * CLZ: !Rd, !Rm
- * CPY: Rd, Rm
- * LDC/2,STC/2 immediate offset & unindex: Rn
- * LDC/2,STC/2 immediate pre/post-indexed: !Rn
- * LDM(1/3): !Rn, register_list
- * LDM(2): !Rn, !register_list
- * LDR,STR,PLD immediate offset: Rd, Rn
- * LDR,STR,PLD register offset: Rd, Rn, !Rm
- * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm
- * LDR,STR immediate pre/post-indexed: Rd, !Rn
- * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm
- * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm
- * LDRB,STRB immediate offset: !Rd, Rn
- * LDRB,STRB register offset: !Rd, Rn, !Rm
- * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm
- * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn
- * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn
- * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm
- * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn
- * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm
- * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn
- * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm
- * LDREX: !Rd, !Rn
- * MCR/2: !Rd
- * MCRR/2,MRRC/2: !Rd, !Rn
- * MLA: !Rd, !Rn, !Rm, !Rs
- * MOV: Rd
- * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register)
- * MRS,MSR: !Rd
- * MUL: !Rd, !Rm, !Rs
- * PKH{BT,TB}: !Rd, !Rn, !Rm
- * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn
- * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn
- * REV/16/SH: !Rd, !Rm
- * RFE: !Rn
- * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm
- * SEL: !Rd, !Rn, !Rm
- * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs
- * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs
- * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs
- * SSAT/16: !Rd, !Rm
- * STM(1/2): !Rn, register_list* (R15 in reg list not recommended)
- * STRT immediate pre/post-indexed: Rd*, !Rn
- * STRT register pre/post-indexed: Rd*, !Rn, !Rm
- * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm
- * STREX: !Rd, !Rn, !Rm
- * SWP/B: !Rd, !Rn, !Rm
- * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm
- * {S,U}XT{B,B16,H}: !Rd, !Rm
- * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs
- * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs
- *
- * May transfer control by writing R15 (possible mode changes or alternate
- * mode accesses marked by "*"):
- * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY,
- * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI*
- *
- * Instructions that do not take general registers, nor transfer control:
- * CDP/2, SETEND, SRS*
- */
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 2ba7deb3072..1656c87501c 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -134,7 +134,8 @@ static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
 				 struct kprobe_ctlblk *kcb)
 {
 	regs->ARM_pc += 4;
-	p->ainsn.insn_handler(p, regs);
+	if (p->ainsn.insn_check_cc(regs->ARM_cpsr))
+		p->ainsn.insn_handler(p, regs);
 }
 
 /*
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
index 31a316c1777..0f107dcb034 100644
--- a/arch/arm/kernel/leds.c
+++ b/arch/arm/kernel/leds.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/leds.h>
 
@@ -69,36 +70,37 @@ static ssize_t leds_store(struct sys_device *dev,
 
 static SYSDEV_ATTR(event, 0200, NULL, leds_store);
 
-static int leds_suspend(struct sys_device *dev, pm_message_t state)
+static struct sysdev_class leds_sysclass = {
+	.name		= "leds",
+};
+
+static struct sys_device leds_device = {
+	.id		= 0,
+	.cls		= &leds_sysclass,
+};
+
+static int leds_suspend(void)
 {
 	leds_event(led_stop);
 	return 0;
 }
 
-static int leds_resume(struct sys_device *dev)
+static void leds_resume(void)
 {
 	leds_event(led_start);
-	return 0;
 }
 
-static int leds_shutdown(struct sys_device *dev)
+static void leds_shutdown(void)
 {
 	leds_event(led_halted);
-	return 0;
 }
 
-static struct sysdev_class leds_sysclass = {
-	.name		= "leds",
+static struct syscore_ops leds_syscore_ops = {
 	.shutdown	= leds_shutdown,
 	.suspend	= leds_suspend,
 	.resume		= leds_resume,
 };
 
-static struct sys_device leds_device = {
-	.id		= 0,
-	.cls		= &leds_sysclass,
-};
-
 static int __init leds_init(void)
 {
 	int ret;
@@ -107,6 +109,8 @@ static int __init leds_init(void)
 		ret = sysdev_register(&leds_device);
 	if (ret == 0)
 		ret = sysdev_create_file(&leds_device, &attr_event);
+	if (ret == 0)
+		register_syscore_ops(&leds_syscore_ops);
 	return ret;
 }
 
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 22e194eb853..139e3c82736 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -79,6 +79,7 @@ struct arm_pmu {
 	void		(*write_counter)(int idx, u32 val);
 	void		(*start)(void);
 	void		(*stop)(void);
+	void		(*reset)(void *);
 	const unsigned	(*cache_map)[PERF_COUNT_HW_CACHE_MAX]
 				    [PERF_COUNT_HW_CACHE_OP_MAX]
 				    [PERF_COUNT_HW_CACHE_RESULT_MAX];
@@ -204,11 +205,9 @@ armpmu_event_set_period(struct perf_event *event,
 static u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx)
+		    int idx, int overflow)
 {
-	int shift = 64 - 32;
-	s64 prev_raw_count, new_raw_count;
-	u64 delta;
+	u64 delta, prev_raw_count, new_raw_count;
 
 again:
 	prev_raw_count = local64_read(&hwc->prev_count);
@@ -218,8 +217,13 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	delta = (new_raw_count << shift) - (prev_raw_count << shift);
-	delta >>= shift;
+	new_raw_count &= armpmu->max_period;
+	prev_raw_count &= armpmu->max_period;
+
+	if (overflow)
+		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
+	else
+		delta = new_raw_count - prev_raw_count;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -236,7 +240,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx);
+	armpmu_event_update(event, hwc, hwc->idx, 0);
 }
 
 static void
@@ -254,7 +258,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx);
+		armpmu_event_update(event, hwc, hwc->idx, 0);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -624,6 +628,19 @@ static struct pmu pmu = {
 #include "perf_event_v6.c"
 #include "perf_event_v7.c"
 
+/*
+ * Ensure the PMU has sane values out of reset.
+ * This requires SMP to be available, so exists as a separate initcall.
+ */
+static int __init
+armpmu_reset(void)
+{
+	if (armpmu && armpmu->reset)
+		return on_each_cpu(armpmu->reset, NULL, 1);
+	return 0;
+}
+arch_initcall(armpmu_reset);
+
 static int __init
 init_hw_perf_events(void)
 {
@@ -729,7 +746,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 
 	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
 
-	while (tail && !((unsigned long)tail & 0x3))
+	while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
+	       tail && !((unsigned long)tail & 0x3))
 		tail = user_backtrace(tail, entry);
 }
 
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 6fc2d228db5..f1e8dd94afe 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -474,7 +474,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 2e1402556fa..4960686afb5 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -466,6 +466,7 @@ static inline unsigned long armv7_pmnc_read(void)
 static inline void armv7_pmnc_write(unsigned long val)
 {
 	val &= ARMV7_PMNC_MASK;
+	isb();
 	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
 }
 
@@ -502,6 +503,7 @@ static inline int armv7_pmnc_select_counter(unsigned int idx)
 
 	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
 	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+	isb();
 
 	return idx;
 }
@@ -780,7 +782,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -847,6 +849,18 @@ static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
 	}
 }
 
+static void armv7pmu_reset(void *info)
+{
+	u32 idx, nb_cnt = armpmu->num_events;
+
+	/* The counter and interrupt enable registers are unknown at reset. */
+	for (idx = 1; idx < nb_cnt; ++idx)
+		armv7pmu_disable_event(NULL, idx);
+
+	/* Initialize & Reset PMNC: C and P bits */
+	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+}
+
 static struct arm_pmu armv7pmu = {
 	.handle_irq		= armv7pmu_handle_irq,
 	.enable			= armv7pmu_enable_event,
@@ -856,17 +870,15 @@ static struct arm_pmu armv7pmu = {
 	.get_event_idx		= armv7pmu_get_event_idx,
 	.start			= armv7pmu_start,
 	.stop			= armv7pmu_stop,
+	.reset			= armv7pmu_reset,
 	.raw_event_mask		= 0xFF,
 	.max_period		= (1LLU << 32) - 1,
 };
 
-static u32 __init armv7_reset_read_pmnc(void)
+static u32 __init armv7_read_num_pmnc_events(void)
 {
 	u32 nb_cnt;
 
-	/* Initialize & Reset PMNC: C and P bits */
-	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
 	/* Read the nb of CNTx counters supported from PMNC */
 	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
 
@@ -880,7 +892,7 @@ static const struct arm_pmu *__init armv7_a8_pmu_init(void)
 	armv7pmu.name		= "ARMv7 Cortex-A8";
 	armv7pmu.cache_map	= &armv7_a8_perf_cache_map;
 	armv7pmu.event_map	= &armv7_a8_perf_map;
-	armv7pmu.num_events	= armv7_reset_read_pmnc();
+	armv7pmu.num_events	= armv7_read_num_pmnc_events();
 	return &armv7pmu;
 }
 
@@ -890,7 +902,7 @@ static const struct arm_pmu *__init armv7_a9_pmu_init(void)
 	armv7pmu.name		= "ARMv7 Cortex-A9";
 	armv7pmu.cache_map	= &armv7_a9_perf_cache_map;
 	armv7pmu.event_map	= &armv7_a9_perf_map;
-	armv7pmu.num_events	= armv7_reset_read_pmnc();
+	armv7pmu.num_events	= armv7_read_num_pmnc_events();
 	return &armv7pmu;
 }
 #else
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 28cd3b025bc..39affbe4fdb 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -246,7 +246,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -578,7 +578,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
+		armpmu_event_update(event, hwc, idx, 1);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 94bbedbed63..5e1e5419722 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -372,6 +372,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	if (clone_flags & CLONE_SETTLS)
 		thread->tp_value = regs->ARM_r3;
 
+	thread_notify(THREAD_NOTIFY_COPY, thread);
+
 	return 0;
 }
 
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 2bf27f364d0..8182f45ca49 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request,
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 		case PTRACE_GETHBPREGS:
+			if (ptrace_get_breakpoints(child) < 0)
+				return -ESRCH;
+
 			ret = ptrace_gethbpregs(child, addr,
 						(unsigned long __user *)data);
+			ptrace_put_breakpoints(child);
 			break;
 		case PTRACE_SETHBPREGS:
+			if (ptrace_get_breakpoints(child) < 0)
+				return -ESRCH;
+
 			ret = ptrace_sethbpregs(child, addr,
 						(unsigned long __user *)data);
+			ptrace_put_breakpoints(child);
 			break;
 #endif
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index cb839831764..0340224cf73 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -597,19 +597,13 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
 	return err;
 }
 
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
-	regs->ARM_r0 = regs->ARM_ORIG_r0;
-	regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
-}
-
 /*
  * OK, we're invoking a handler
  */	
 static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset,
-	      struct pt_regs * regs, int syscall)
+	      struct pt_regs * regs)
 {
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = current;
@@ -617,26 +611,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	int ret;
 
 	/*
-	 * If we were from a system call, check for system call restarting...
-	 */
-	if (syscall) {
-		switch (regs->ARM_r0) {
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-			regs->ARM_r0 = -EINTR;
-			break;
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				regs->ARM_r0 = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			setup_syscall_restart(regs);
-		}
-	}
-
-	/*
 	 * translate the signal
 	 */
 	if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
@@ -685,6 +659,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  */
 static void do_signal(struct pt_regs *regs, int syscall)
 {
+	unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
 	struct k_sigaction ka;
 	siginfo_t info;
 	int signr;
@@ -698,18 +673,61 @@ static void do_signal(struct pt_regs *regs, int syscall)
 	if (!user_mode(regs))
 		return;
 
+	/*
+	 * If we were from a system call, check for system call restarting...
+	 */
+	if (syscall) {
+		continue_addr = regs->ARM_pc;
+		restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4);
+		retval = regs->ARM_r0;
+
+		/*
+		 * Prepare for system call restart.  We do this here so that a
+		 * debugger will see the already changed PSW.
+		 */
+		switch (retval) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			regs->ARM_r0 = regs->ARM_ORIG_r0;
+			regs->ARM_pc = restart_addr;
+			break;
+		case -ERESTART_RESTARTBLOCK:
+			regs->ARM_r0 = -EINTR;
+			break;
+		}
+	}
+
 	if (try_to_freeze())
 		goto no_signal;
 
+	/*
+	 * Get the signal to deliver.  When running under ptrace, at this
+	 * point the debugger may change all our registers ...
+	 */
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
 		sigset_t *oldset;
 
+		/*
+		 * Depending on the signal settings we may need to revert the
+		 * decision to restart the system call.  But skip this if a
+		 * debugger has chosen to restart at a different PC.
+		 */
+		if (regs->ARM_pc == restart_addr) {
+			if (retval == -ERESTARTNOHAND
+			    || (retval == -ERESTARTSYS
+				&& !(ka.sa.sa_flags & SA_RESTART))) {
+				regs->ARM_r0 = -EINTR;
+				regs->ARM_pc = continue_addr;
+			}
+		}
+
 		if (test_thread_flag(TIF_RESTORE_SIGMASK))
 			oldset = &current->saved_sigmask;
 		else
 			oldset = &current->blocked;
-		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
 			/*
 			 * A signal was successfully delivered; the saved
 			 * sigmask will have been stored in the signal frame,
@@ -723,11 +741,14 @@ static void do_signal(struct pt_regs *regs, int syscall)
 	}
 
  no_signal:
-	/*
-	 * No signal to deliver to the process - restart the syscall.
-	 */
 	if (syscall) {
-		if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
+		/*
+		 * Handle restarting a different system call.  As above,
+		 * if a debugger has chosen to restart at a different PC,
+		 * ignore the restart.
+		 */
+		if (retval == -ERESTART_RESTARTBLOCK
+		    && regs->ARM_pc == continue_addr) {
 			if (thumb_mode(regs)) {
 				regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
 				regs->ARM_pc -= 2;
@@ -750,11 +771,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
 #endif
 			}
 		}
-		if (regs->ARM_r0 == -ERESTARTNOHAND ||
-		    regs->ARM_r0 == -ERESTARTSYS ||
-		    regs->ARM_r0 == -ERESTARTNOINTR) {
-			setup_syscall_restart(regs);
-		}
 
 		/* If there's no signal to deliver, we just put the saved sigmask
 		 * back.
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index bfad698a02e..6398ead9d1c 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -119,11 +119,19 @@ ENTRY(cpu_resume)
 #else
 	ldr	r0, sleep_save_sp	@ stack phys addr
 #endif
-	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+	setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set SVC, irqs off
 #ifdef MULTI_CPU
-	ldmia	r0!, {r1, sp, lr, pc}	@ load v:p, stack, return fn, resume fn
+	@ load v:p, stack, return fn, resume fn
+  ARM(	ldmia	r0!, {r1, sp, lr, pc}	)
+THUMB(	ldmia	r0!, {r1, r2, r3, r4}	)
+THUMB(	mov	sp, r2			)
+THUMB(	mov	lr, r3			)
+THUMB(	bx	r4			)
 #else
-	ldmia	r0!, {r1, sp, lr}	@ load v:p, stack, return fn
+	@ load v:p, stack, return fn
+  ARM(	ldmia	r0!, {r1, sp, lr}	)
+THUMB(	ldmia	r0!, {r1, r2, lr}	)
+THUMB(	mov	sp, r2			)
 	b	cpu_do_resume
 #endif
 ENDPROC(cpu_resume)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8fe05ad932e..007a0a950e7 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -479,7 +479,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-static void broadcast_timer_setup(struct clock_event_device *evt)
+static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 {
 	evt->name	= "dummy_timer";
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
@@ -560,10 +560,7 @@ asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
 		break;
 
 	case IPI_RESCHEDULE:
-		/*
-		 * nothing more to do - eveything is
-		 * done on the interrupt return path
-		 */
+		scheduler_ipi();
 		break;
 
 	case IPI_CALL_FUNC:
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 7a576092291..40ee7e5045e 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -158,7 +158,7 @@ static int emulate_swpX(unsigned int address, unsigned int *data,
 
 	if (res == 0) {
 		/*
-		 * Barrier also required between aquiring a lock for a
+		 * Barrier also required between acquiring a lock for a
 		 * protected resource and accessing the resource. Inserted for
 		 * same reason as above.
 		 */
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 4ad8da15ef2..af0aaebf4de 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int semid,
 	long err;
 	int i;
 
-	if (nsops < 1)
+	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
 	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
 	if (!sops)
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 1ff46cabc7e..cb634c3e28e 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,7 +21,7 @@
 #include <linux/timex.h>
 #include <linux/errno.h>
 #include <linux/profile.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/timer.h>
 #include <linux/irq.h>
 
@@ -115,48 +115,37 @@ void timer_tick(void)
 #endif
 
 #if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(struct sys_device *dev, pm_message_t state)
+static int timer_suspend(void)
 {
-	struct sys_timer *timer = container_of(dev, struct sys_timer, dev);
-
-	if (timer->suspend != NULL)
-		timer->suspend();
+	if (system_timer->suspend)
+		system_timer->suspend();
 
 	return 0;
 }
 
-static int timer_resume(struct sys_device *dev)
+static void timer_resume(void)
 {
-	struct sys_timer *timer = container_of(dev, struct sys_timer, dev);
-
-	if (timer->resume != NULL)
-		timer->resume();
-
-	return 0;
+	if (system_timer->resume)
+		system_timer->resume();
 }
 #else
 #define timer_suspend NULL
 #define timer_resume NULL
 #endif
 
-static struct sysdev_class timer_sysclass = {
-	.name		= "timer",
+static struct syscore_ops timer_syscore_ops = {
 	.suspend	= timer_suspend,
 	.resume		= timer_resume,
 };
 
-static int __init timer_init_sysfs(void)
+static int __init timer_init_syscore_ops(void)
 {
-	int ret = sysdev_class_register(&timer_sysclass);
-	if (ret == 0) {
-		system_timer->dev.cls = &timer_sysclass;
-		ret = sysdev_register(&system_timer->dev);
-	}
+	register_syscore_ops(&timer_syscore_ops);
 
-	return ret;
+	return 0;
 }
 
-device_initcall(timer_init_sysfs);
+device_initcall(timer_init_syscore_ops);
 
 void __init time_init(void)
 {
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f0000e188c8..d52eec268b4 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -234,7 +234,6 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt
 
 	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
-	sysfs_printk_last_file();
 
 	/* trap and error numbers are mostly meaningless on ARM */
 	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
@@ -410,8 +409,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	struct thread_info *thread = current_thread_info();
 	siginfo_t info;
 
-	if (current->personality != PER_LINUX &&
-	    current->personality != PER_LINUX_32BIT &&
+	if ((current->personality & PER_MASK) != PER_LINUX &&
 	    thread->exec_domain->handler) {
 		thread->exec_domain->handler(n, regs);
 		return regs->ARM_r0;
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 19390231a0e..2d299bf5d72 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -83,6 +83,7 @@ config ARCH_AT91CAP9
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT572D940HF
 	bool "AT572D940HF"
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 2e74a19874d..295e1e77fa6 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -76,7 +76,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 	.pullup_pin	= AT91_PIN_PD9,
 };
 
-/* FIXME: user dependant */
+/* FIXME: user dependent */
 // static struct at91_cf_data __initdata carmeva_cf_data = {
 //	.det_pin	= AT91_PIN_PB0,
 //	.rst_pin	= AT91_PIN_PC5,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 1f9d3cb64c5..d8df59a3426 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -30,6 +30,11 @@
 #include <mach/board.h>
 #include "generic.h"
 
+static void __init at91eb01_init_irq(void)
+{
+	at91x40_init_interrupts(NULL);
+}
+
 static void __init at91eb01_map_io(void)
 {
 	at91x40_initialize(40000000);
@@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void)
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
 	.timer		= &at91x40_timer,
-	.init_irq	= at91x40_init_interrupts,
+	.init_irq	= at91eb01_init_irq,
 	.map_io		= at91eb01_map_io,
 MACHINE_END
 
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 27ac6f550fe..02182c16a02 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -102,7 +102,7 @@
 #define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
 #define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
 #define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
-#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
+#define		AT91_MCI_RTOE		(1 << 20)	/* Response Time-out Error */
 #define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
 #define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
 #define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 3bef931d0b1..0700f212530 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -27,6 +27,7 @@
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
 #define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
+#define ARCH_ID_AT91SAM9X5	0x819a05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void)
 #define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
+#define ARCH_EXID_AT91SAM9G15	0x00000000
+#define ARCH_EXID_AT91SAM9G35	0x00000001
+#define ARCH_EXID_AT91SAM9X35	0x00000002
+#define ARCH_EXID_AT91SAM9G25	0x00000003
+#define ARCH_EXID_AT91SAM9X25	0x00000004
+
 static inline unsigned long at91_exid_identify(void)
 {
 	return at91_sys_read(AT91_DBGU_EXID);
@@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9m11()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9X5
+#define cpu_is_at91sam9x5()	(at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
+#define cpu_is_at91sam9g25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9x25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#else
+#define cpu_is_at91sam9x5()	(0)
+#define cpu_is_at91sam9g15()	(0)
+#define cpu_is_at91sam9g35()	(0)
+#define cpu_is_at91sam9x35()	(0)
+#define cpu_is_at91sam9g25()	(0)
+#define cpu_is_at91sam9x25()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index ddeb6453675..056dc6674b6 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -208,7 +208,7 @@ extern void at91_gpio_resume(void);
 
 /*-------------------------------------------------------------------------*/
 
-/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
+/* wrappers for "new style" GPIO calls. the old AT91-specific ones should
  * eventually be removed (along with this errno.h inclusion), and the
  * gpio request/free calls should probably be implemented.
  */
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index 77f84b40dda..a1f328357aa 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -551,7 +551,7 @@ int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Config
 
 /****************************************************************************/
 /**
-*  @brief   Check the existance of pending descriptor
+*  @brief   Check the existence of pending descriptor
 *
 *  This function confirmes if there is any pending descriptor in the chain
 *  to program the channel
@@ -775,7 +775,7 @@ int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Cha
 /**
 *  @brief   Read data DMAed to memory
 *
-*  This function will read data that has been DMAed to memory while transfering from:
+*  This function will read data that has been DMAed to memory while transferring from:
 *          - Memory to memory
 *          - Peripheral to memory
 *
@@ -941,7 +941,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configurat
 /**
 *  @brief   Sets channel specific user data
 *
-*  This function associates user data to a specif DMA channel
+*  This function associates user data to a specific DMA channel
 *
 */
 /****************************************************************************/
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 8d1baf3f468..d87ad30dda3 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -629,7 +629,7 @@ EXPORT_SYMBOL(dma_get_device_descriptor_ring);
 *   Configures a DMA channel.
 *
 *   @return
-*       >= 0    - Initialization was successfull.
+*       >= 0    - Initialization was successful.
 *
 *       -EBUSY  - Device is currently being used.
 *       -ENODEV - Device handed in is invalid.
@@ -673,7 +673,7 @@ static int ConfigChannel(DMA_Handle_t handle)
 /**
 *   Initializes all of the data structures associated with the DMA.
 *   @return
-*       >= 0    - Initialization was successfull.
+*       >= 0    - Initialization was successful.
 *
 *       -EBUSY  - Device is currently being used.
 *       -ENODEV - Device handed in is invalid.
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
index 6c8da2b9fc1..e6a1dc484ca 100644
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -362,7 +362,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configurati
 /**
 *  @brief   Read data DMA transferred to memory
 *
-*  This function will read data that has been DMAed to memory while transfering from:
+*  This function will read data that has been DMAed to memory while transferring from:
 *          - Memory to memory
 *          - Peripheral to memory
 *
@@ -446,7 +446,7 @@ void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle *
 
 /****************************************************************************/
 /**
-*  @brief   Check the existance of pending descriptor
+*  @brief   Check the existence of pending descriptor
 *
 *  This function confirmes if there is any pending descriptor in the chain
 *  to program the channel
@@ -542,7 +542,7 @@ dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
 /**
 *  @brief   Sets channel specific user data
 *
-*  This function associates user data to a specif DMA channel
+*  This function associates user data to a specific DMA channel
 *
 */
 /****************************************************************************/
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
index 70eaea866cf..161973385fa 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -180,7 +180,7 @@ typedef enum {
 
 #define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
 
-/* Programable pin defines */
+/* Programmable pin defines */
 #define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
 									     /* GPIO pin 0 - 60 */
 #define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
index c78833acb37..03238c29900 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -832,7 +832,7 @@ static inline void chipcHw_setUsbDevice(void)
 
 /****************************************************************************/
 /**
-*  @brief   Lower layer funtion to enable/disable a clock of a certain device
+*  @brief   Lower layer function to enable/disable a clock of a certain device
 *
 *  This function enables/disables a core clock
 *
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
index e01fc4607c9..0aeb6a6fe7f 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -109,9 +109,9 @@
 #define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
 
 /* INTC1 - interrupt controller 1 */
-#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */
 #define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interrupt (For A0 only)) */
 #define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
 #define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
 /* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h
index 06a355481ea..0992842caa7 100644
--- a/arch/arm/mach-bcmring/include/mach/reg_umi.h
+++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h
@@ -88,7 +88,7 @@
 /* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */
 /* Enable wait pin during burst write or read */
 #define REG_UMI_TCR_WAITEN              0x80000000
-/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */
+/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */
 #define REG_UMI_TCR_LOWFREQ             0x40000000
 /* 1=synch write, 0=async write */
 #define REG_UMI_TCR_MEMTYPE_SYNCWRITE   0x20000000
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 32f147998cd..c0deacae778 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM
 	depends on ARCH_DAVINCI_DM644x
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
@@ -72,6 +73,7 @@ config MACH_SFFSDR
 	depends on ARCH_DAVINCI_DM644x
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
@@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM
 	select MACH_DAVINCI_DM6467TEVM
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
@@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM
 	depends on ARCH_DAVINCI_DM365
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
@@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM
 	select GPIO_PCF857X
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
@@ -205,6 +210,7 @@ config MACH_MITYOMAPL138
 	depends on ARCH_DAVINCI_DA850
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2aa79c54f98..606a6f27ed6 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -29,7 +29,7 @@
 #include <mach/mux.h>
 #include <mach/spi.h>
 
-#define MITYOMAPL138_PHY_ID		"0:03"
+#define MITYOMAPL138_PHY_ID		""
 
 #define FACTORY_CONFIG_MAGIC	0x012C0138
 #define FACTORY_CONFIG_VERSION	0x00010001
@@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = {
 
 static struct platform_device mityomapl138_nandflash_device = {
 	.name		= "davinci_nand",
-	.id		= 0,
+	.id		= 1,
 	.dev		= {
 		.platform_data	= &mityomapl138_nandflash_data,
 	},
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 6c389ff1020..3e7be2de96d 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -11,7 +11,7 @@
  * DM644X-EVM board. It has:
  * 	DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
  * 	USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
- * 	Additionaly realtime clock, IR remote control receiver,
+ * 	Additionally realtime clock, IR remote control receiver,
  * 	IR Blaster based on MSP430 (firmware although is different
  * 	from used in DM644X-EVM), internal ATA-6 3.5� HDD drive
  * 	with PATA interface, two muxed red-green leds.
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 4a68c2b1ec1..41669ecc1f9 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -94,9 +94,7 @@ static int davinci_target(struct cpufreq_policy *policy,
 	if (freqs.old == freqs.new)
 		return ret;
 
-	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
-			dev_driver_string(cpufreq.dev),
-			"transition: %u --> %u\n", freqs.old, freqs.new);
+	dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
 
 	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
 						freqs.new, relation, &idx);
@@ -167,7 +165,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy)
 	/*
 	 * Time measurement across the target() function yields ~1500-1800us
 	 * time taken with no drivers on notification list.
-	 * Setting the latency to 2000 us to accomodate addition of drivers
+	 * Setting the latency to 2000 us to accommodate addition of drivers
 	 * to pre/post change notification list.
 	 */
 	policy->cpuinfo.transition_latency = 2000 * 1000;
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 68fe4c289d7..b95b9196dee 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1123,7 +1123,7 @@ void __init da850_init(void)
 	 * This helps keeping the peripherals on this domain insulated
 	 * from CPU frequency changes caused by DVFS. The firmware sets
 	 * both PLL0 and PLL1 to the same frequency so, there should not
-	 * be any noticible change even in non-DVFS use cases.
+	 * be any noticeable change even in non-DVFS use cases.
 	 */
 	da850_set_async3_src(1);
 
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 625d4b66718..58a02dc7b15 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -39,7 +39,8 @@
 #define DA8XX_GPIO_BASE			0x01e26000
 #define DA8XX_I2C1_BASE			0x01e28000
 #define DA8XX_SPI0_BASE			0x01c41000
-#define DA8XX_SPI1_BASE			0x01f0e000
+#define DA830_SPI1_BASE			0x01e12000
+#define DA850_SPI1_BASE			0x01f0e000
 
 #define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
 #define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
@@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = {
 
 static struct resource da8xx_spi1_resources[] = {
 	[0] = {
-		.start	= DA8XX_SPI1_BASE,
-		.end	= DA8XX_SPI1_BASE + SZ_4K - 1,
+		.start	= DA830_SPI1_BASE,
+		.end	= DA830_SPI1_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
 
 	da8xx_spi_pdata[instance].num_chipselect = len;
 
+	if (instance == 1 && cpu_is_davinci_da850()) {
+		da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
+		da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
+	}
+
 	return platform_device_register(&da8xx_spi_device[instance]);
 }
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 76364d1345d..a3a94e9c937 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -314,7 +314,7 @@ static struct clk timer2_clk = {
 	.name = "timer2",
 	.parent = &pll1_aux_clk,
 	.lpsc = DAVINCI_LPSC_TIMER2,
-	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+	.usecount = 1,              /* REVISIT: why can't this be disabled? */
 };
 
 static struct clk timer3_clk = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 9a2376b3137..4c82c271629 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -274,7 +274,7 @@ static struct clk timer2_clk = {
 	.name = "timer2",
 	.parent = &pll1_aux_clk,
 	.lpsc = DAVINCI_LPSC_TIMER2,
-	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+	.usecount = 1,              /* REVISIT: why can't this be disabled? */
 };
 
 static struct clk_lookup dm644x_clks[] = {
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index cea6b897204..957fb87e832 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -4,7 +4,7 @@
  * Author: Kevin Hilman, Deep Root Systems, LLC
  *
  * Defines the cpu_is_*() macros for runtime detection of DaVinci
- * device type.  In addtion, if support for a given device is not
+ * device type.  In addition, if support for a given device is not
  * compiled in to the kernel, the macros return 0 so that
  * resulting code can be optimized out.
  *
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 9f1befc5ac3..f8b7ea4f623 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -24,6 +24,9 @@
 
 #define UART_SHIFT	2
 
+#define davinci_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define davinci_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
 		.pushsection .data
 davinci_uart_phys:	.word	0
 davinci_uart_virt:	.word	0
@@ -34,7 +37,7 @@ davinci_uart_virt:	.word	0
 		/* Use davinci_uart_phys/virt if already configured */
 10:		mrc	p15, 0, \rp, c1, c0
 		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =__virt_to_phys(davinci_uart_phys)
+		ldreq	\rp, =davinci_uart_v2p(davinci_uart_phys)
 		ldrne	\rp, =davinci_uart_phys
 		add	\rv, \rp, #4		@ davinci_uart_virt
 		ldr	\rp, [\rp, #0]
@@ -48,18 +51,18 @@ davinci_uart_virt:	.word	0
 		tst	\rp, #1			@ MMU enabled?
 
 		/* Copy uart phys address from decompressor uart info */
-		ldreq	\rv, =__virt_to_phys(davinci_uart_phys)
+		ldreq	\rv, =davinci_uart_v2p(davinci_uart_phys)
 		ldrne	\rv, =davinci_uart_phys
 		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
 		ldr	\rp, [\rp, #0]
 		str	\rp, [\rv]
 
 		/* Copy uart virt address from decompressor uart info */
-		ldreq	\rv, =__virt_to_phys(davinci_uart_virt)
+		ldreq	\rv, =davinci_uart_v2p(davinci_uart_virt)
 		ldrne	\rv, =davinci_uart_virt
 		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
 		ldr	\rp, [\rp, #4]
 		str	\rp, [\rv]
 
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 8051110b8ac..c9e6ce185a6 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -22,7 +22,7 @@
  *
  * This area sits just below the page tables (see arch/arm/kernel/head.S).
  */
-#define DAVINCI_UART_INFO	(PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO	(PLAT_PHYS_OFFSET + 0x3ff8)
 
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 180b8a9d0d2..a5a9ff70b19 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -101,7 +101,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	/*
-	 * map discontiguous hw irq range to continous sw irq range:
+	 * map discontiguous hw irq range to continuous sw irq range:
 	 *
 	 *  IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
 	 */
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h
index 939728b38d4..be9266b10fd 100644
--- a/arch/arm/mach-exynos4/include/mach/gpio.h
+++ b/arch/arm/mach-exynos4/include/mach/gpio.h
@@ -18,7 +18,7 @@
 #define gpio_cansleep	__gpio_cansleep
 #define gpio_to_irq	__gpio_to_irq
 
-/* Practically, GPIO banks upto GPZ are the configurable gpio banks */
+/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
 
 /* GPIO bank sizes */
 #define EXYNOS4_GPIO_A0_NR	(8)
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index af82a8fbb68..14ac10b7ec0 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -276,7 +276,7 @@ static void exynos4_mct_tick_start(unsigned long cycles,
 	/* update interrupt count buffer */
 	exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
 
-	/* enable MCT tick interupt */
+	/* enable MCT tick interrupt */
 	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
 
 	tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index 10d917d9e3a..8755ca8dd48 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -16,6 +16,7 @@
 
 #include <linux/init.h>
 #include <linux/suspend.h>
+#include <linux/syscore_ops.h>
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
@@ -372,7 +373,27 @@ void exynos4_scu_enable(void __iomem *scu_base)
 	flush_cache_all();
 }
 
-static int exynos4_pm_resume(struct sys_device *dev)
+static struct sysdev_driver exynos4_pm_driver = {
+	.add		= exynos4_pm_add,
+};
+
+static __init int exynos4_pm_drvinit(void)
+{
+	unsigned int tmp;
+
+	s3c_pm_init();
+
+	/* All wakeup disable */
+
+	tmp = __raw_readl(S5P_WAKEUP_MASK);
+	tmp |= ((0xFF << 8) | (0x1F << 1));
+	__raw_writel(tmp, S5P_WAKEUP_MASK);
+
+	return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+}
+arch_initcall(exynos4_pm_drvinit);
+
+static void exynos4_pm_resume(void)
 {
 	/* For release retention */
 
@@ -394,27 +415,15 @@ static int exynos4_pm_resume(struct sys_device *dev)
 	/* enable L2X0*/
 	writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
 #endif
-
-	return 0;
 }
 
-static struct sysdev_driver exynos4_pm_driver = {
-	.add		= exynos4_pm_add,
+static struct syscore_ops exynos4_pm_syscore_ops = {
 	.resume		= exynos4_pm_resume,
 };
 
-static __init int exynos4_pm_drvinit(void)
+static __init int exynos4_pm_syscore_init(void)
 {
-	unsigned int tmp;
-
-	s3c_pm_init();
-
-	/* All wakeup disable */
-
-	tmp = __raw_readl(S5P_WAKEUP_MASK);
-	tmp |= ((0xFF << 8) | (0x1F << 1));
-	__raw_writel(tmp, S5P_WAKEUP_MASK);
-
-	return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+	register_syscore_ops(&exynos4_pm_syscore_ops);
+	return 0;
 }
-arch_initcall(exynos4_pm_drvinit);
+arch_initcall(exynos4_pm_syscore_init);
diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c
index 1b3d3a2de95..e8d08bf8965 100644
--- a/arch/arm/mach-exynos4/setup-sdhci-gpio.c
+++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c
@@ -38,14 +38,14 @@ void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 	switch (width) {
 	case 8:
 		for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
-			/* Data pin GPK1[3:6] to special-funtion 3 */
+			/* Data pin GPK1[3:6] to special-function 3 */
 			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
 			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
 			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
 		}
 	case 4:
 		for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) {
-			/* Data pin GPK0[3:6] to special-funtion 2 */
+			/* Data pin GPK0[3:6] to special-function 2 */
 			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
 			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
 			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c
index 85f9433d483..1e83f8cf236 100644
--- a/arch/arm/mach-exynos4/setup-sdhci.c
+++ b/arch/arm/mach-exynos4/setup-sdhci.c
@@ -35,7 +35,7 @@ void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
 {
 	u32 ctrl2, ctrl3;
 
-	/* don't need to alter anything acording to card-type */
+	/* don't need to alter anything according to card-type */
 
 	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
 
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index bdd257921cf..46adca068f2 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -4,6 +4,7 @@ menu "Footbridge Implementations"
 
 config ARCH_CATS
 	bool "CATS"
+	select CLKSRC_I8253
 	select FOOTBRIDGE_HOST
 	select ISA
 	select ISA_DMA
@@ -59,6 +60,7 @@ config ARCH_EBSA285_HOST
 
 config ARCH_NETWINDER
 	bool "NetWinder"
+	select CLKSRC_I8253
 	select FOOTBRIDGE_HOST
 	select ISA
 	select ISA_DMA
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index 441c6ce0d55..7020f1a3fec 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -10,53 +10,16 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 #include <linux/timex.h>
 
 #include <asm/irq.h>
-
+#include <asm/i8253.h>
 #include <asm/mach/time.h>
 
 #include "common.h"
 
-#define PIT_MODE	0x43
-#define PIT_CH0		0x40
-
-#define PIT_LATCH	((PIT_TICK_RATE + HZ / 2) / HZ)
-
-static cycle_t pit_read(struct clocksource *cs)
-{
-	unsigned long flags;
-	static int old_count;
-	static u32 old_jifs;
-	int count;
-	u32 jifs;
-
-	raw_local_irq_save(flags);
-
-	jifs = jiffies;
-	outb_p(0x00, PIT_MODE);		/* latch the count */
-	count = inb_p(PIT_CH0);		/* read the latched count */
-	count |= inb_p(PIT_CH0) << 8;
-
-	if (count > old_count && jifs == old_jifs)
-		count = old_count;
-
-	old_count = count;
-	old_jifs = jifs;
-
-	raw_local_irq_restore(flags);
-
-	count = (PIT_LATCH - 1) - count;
-
-	return (cycle_t)(jifs * PIT_LATCH) + count;
-}
-
-static struct clocksource pit_cs = {
-	.name		= "pit",
-	.rating		= 110,
-	.read		= pit_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-};
+DEFINE_RAW_SPINLOCK(i8253_lock);
 
 static void pit_set_mode(enum clock_event_mode mode,
 	struct clock_event_device *evt)
@@ -121,7 +84,7 @@ static void __init isa_timer_init(void)
 	pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce);
 	pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce);
 
-	clocksource_register_hz(&pit_cs, PIT_TICK_RATE);
+	clocksource_i8253_init();
 
 	setup_irq(pit_ce.irq, &pit_timer_irq);
 	clockevents_register_device(&pit_ce);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5eec099e0c7..56b930a1344 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -255,6 +255,7 @@ config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
 	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_EHCI
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index cb705c28de0..6269053505f 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -34,6 +34,7 @@
 #include <mach/mx25.h>
 #include <mach/imx-uart.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx25.h"
 
@@ -242,6 +243,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
 
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.wp_gpio = -EINVAL,
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx25 init.
  *
@@ -275,7 +281,7 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx25_add_flexcan1(NULL);
-	imx25_add_sdhci_esdhc_imx(0, NULL);
+	imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 980803ff348..d3e96451529 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -24,7 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/string.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 #include <linux/clocksource.h>
@@ -180,13 +180,13 @@ static void __init ap_init_irq(void)
 #ifdef CONFIG_PM
 static unsigned long ic_irq_enable;
 
-static int irq_suspend(struct sys_device *dev, pm_message_t state)
+static int irq_suspend(void)
 {
 	ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE);
 	return 0;
 }
 
-static int irq_resume(struct sys_device *dev)
+static void irq_resume(void)
 {
 	/* disable all irq sources */
 	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
@@ -194,33 +194,25 @@ static int irq_resume(struct sys_device *dev)
 	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
 
 	writel(ic_irq_enable, VA_IC_BASE + IRQ_ENABLE_SET);
-	return 0;
 }
 #else
 #define irq_suspend NULL
 #define irq_resume NULL
 #endif
 
-static struct sysdev_class irq_class = {
-	.name		= "irq",
+static struct syscore_ops irq_syscore_ops = {
 	.suspend	= irq_suspend,
 	.resume		= irq_resume,
 };
 
-static struct sys_device irq_device = {
-	.id	= 0,
-	.cls	= &irq_class,
-};
-
-static int __init irq_init_sysfs(void)
+static int __init irq_syscore_init(void)
 {
-	int ret = sysdev_class_register(&irq_class);
-	if (ret == 0)
-		ret = sysdev_register(&irq_device);
-	return ret;
+	register_syscore_ops(&irq_syscore_ops);
+
+	return 0;
 }
 
-device_initcall(irq_init_sysfs);
+device_initcall(irq_syscore_init);
 
 /*
  * Flash handling.
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 773ea0c95b9..ba3dae352a2 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -225,7 +225,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
 /* This routine checks the status of the last configuration cycle.  If an error
  * was detected it returns >0, else it returns a 0.  The errors being checked
  * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
+ * errors occur during a config cycle where there is no device, like during
  * the discovery stage.
  */
 static int iop13xx_atux_pci_status(int clear)
@@ -332,7 +332,7 @@ static struct pci_ops iop13xx_atux_ops = {
 /* This routine checks the status of the last configuration cycle.  If an error
  * was detected it returns >0, else it returns a 0.  The errors being checked
  * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
+ * errors occur during a config cycle where there is no device, like during
  * the discovery stage.
  */
 static int iop13xx_atue_pci_status(int clear)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 0a95063f6d3..17de0bf53c0 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -58,6 +58,12 @@ static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
 
 static struct gpio_led sheevaplug_led_pins[] = {
 	{
+		.name			= "plug:red:misc",
+		.default_trigger	= "none",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
 		.name			= "plug:green:health",
 		.default_trigger	= "default-on",
 		.gpio			= 49,
@@ -80,6 +86,7 @@ static struct platform_device sheevaplug_leds = {
 
 static unsigned int sheevaplug_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED Red */
 	MPP49_GPIO,	/* LED */
 	0
 };
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index f781164e623..24294b2bc46 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -15,7 +15,7 @@
 
 /****************************************************************************
  * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
+ *     partitions on the device because we want to keep compatibility with
  *     the QNAP firmware.
  * Layout as used by QNAP:
  *  0x00000000-0x00080000 : "U-Boot"
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index e76d41bb705..b9c80597b7b 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -41,7 +41,7 @@
  * DRAM clocking and refresh are slightly different for systems with DDR
  * DRAM or regular SDRAM devices. If SDRAM is used in the system, the
  * SDRAM will still be accessible in direct-run mode. In DDR based systems,
- * a transistion to direct-run mode will stop all DDR accesses (no clocks).
+ * a transition to direct-run mode will stop all DDR accesses (no clocks).
  * Because of this, the code to switch power modes and the code to enter
  * and exit DRAM self-refresh modes must not be executed in DRAM. A small
  * section of IRAM is used instead for this.
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index ee8b02ed801..7bfb827f3fe 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -10,7 +10,7 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPIO_REG(x)	(*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
 
-#define NR_BUILTIN_GPIO	(192)
+#define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
 
 #define gpio_to_bank(gpio)	((gpio) >> 5)
 #define gpio_to_irq(gpio)	(IRQ_GPIO_START + (gpio))
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 4621067c772..713be155a44 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -8,6 +8,15 @@
 #define MFP_DRIVE_MEDIUM	(0x2 << 13)
 #define MFP_DRIVE_FAST		(0x3 << 13)
 
+#undef MFP_CFG
+#undef MFP_CFG_DRV
+
+#define MFP_CFG(pin, af)		\
+	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
+
 /* GPIO */
 #define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
 #define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index aeb9ae23e6c..99833b9485c 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -9,7 +9,7 @@
  *   2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
  *   2008-10-08: Bin Yang <bin.yang@marvell.com>
  *
- * The timers module actually includes three timers, each timer with upto
+ * The timers module actually includes three timers, each timer with up to
  * three match comparators. Timer #0 is used here in free-running mode as
  * the clock source, and match comparator #1 used as clock event device.
  *
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
index 7ffbd987eb5..805d4ee53f7 100644
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -343,7 +343,7 @@ int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
 		}
 	}
 
-	/* Set wait states for CPU inbetween frequency changes */
+	/* Set wait states for CPU between frequency changes */
 	reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
 	reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
 	writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 7f568611547..6a96911b0ad 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -160,10 +160,7 @@ static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
 
 static void __init qsd8x50_init_mmc(void)
 {
-	if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa())
-		vreg_mmc = vreg_get(NULL, "gp6");
-	else
-		vreg_mmc = vreg_get(NULL, "gp5");
+	vreg_mmc = vreg_get(NULL, "gp5");
 
 	if (IS_ERR(vreg_mmc)) {
 		pr_err("vreg get for vreg_mmc failed (%ld)\n",
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
index cfa808dd489..232f97a0450 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-msm/scm.c
@@ -46,7 +46,7 @@ static DEFINE_MUTEX(scm_lock);
  * @id: command to be executed
  * @buf: buffer returned from scm_get_command_buffer()
  *
- * An SCM command is layed out in memory as follows:
+ * An SCM command is laid out in memory as follows:
  *
  *	------------------- <--- struct scm_command
  *	| command header  |
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 56f920c55b6..38b95e949d1 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -269,7 +269,7 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
 	/* Use existing clock_event for cpu 0 */
 	if (!smp_processor_id())
-		return;
+		return 0;
 
 	writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
 
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 80761474c0f..2e288b38b4a 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -43,6 +43,7 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -163,11 +164,14 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD1 CD */
+	MX35_PAD_LD18__GPIO3_24,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 29)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
-#define GPIO_LCDPWR	(4)
+#define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
+#define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -254,6 +258,11 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
 	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
 };
 
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.wp_gpio = -EINVAL,
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx35 init.
  *
@@ -289,7 +298,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
@@ -301,7 +310,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 
 	gpio_request(GPIO_LCDPWR, "LCDPWR");
 	gpio_direction_output(GPIO_LCDPWR, 1);
-	gpio_free(GPIO_LCDPWR);
 
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index b3ecfb22d24..036ba1a4704 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -40,6 +40,7 @@
 #include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -217,11 +218,15 @@ static iomux_v3_cfg_t pcm043_pads[] = {
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
+	MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
 };
 
 #define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
 #define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
 #define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_WP	IMX_GPIO_NR(2, 23)
+#define SD1_GPIO_CD	IMX_GPIO_NR(2, 24)
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -346,6 +351,11 @@ static int __init pcm043_otg_mode(char *options)
 }
 __setup("otg_mode=", pcm043_otg_mode);
 
+static struct esdhc_platform_data sd1_pdata = {
+	.wp_gpio = SD1_GPIO_WP,
+	.cd_gpio = SD1_GPIO_CD,
+};
+
 /*
  * Board specific initialization.
  */
@@ -395,7 +405,7 @@ static void __init pcm043_init(void)
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 }
 
 static void __init pcm043_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
index 2cf390fbd98..47a69cbc31a 100644
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id,
+			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.portsc		= MXC_EHCI_MODE_SERIAL,
-	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY,
+	.init = vpr200_usbh_init,
+	.portsc = MXC_EHCI_MODE_SERIAL,
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 83ee08847d4..159340da919 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -165,6 +165,7 @@ config MACH_MX53_LOCO
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	help
 	  Include support for MX53 LOCO platform. This includes specific
 	  configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 4f63048be3c..0b9338cec51 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
 obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index b2ecd194e76..bea4e4135f9 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -228,13 +228,12 @@ static inline void babbage_fec_reset(void)
 	int ret;
 
 	/* reset FEC PHY */
-	ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+	ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
+					GPIOF_OUT_INIT_LOW, "fec-phy-reset");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
 		return;
 	}
-	gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
-	gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
 	msleep(1);
 	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
 }
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 7b5735c5ea5..2af3f43f74d 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -34,7 +34,7 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
-#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
 #define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
 #define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
 
@@ -82,15 +82,14 @@ static inline void mx53_evk_fec_reset(void)
 	int ret;
 
 	/* reset FEC PHY */
-	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
+	ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+							"fec-phy-reset");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
 		return;
 	}
-	gpio_direction_output(SMD_FEC_PHY_RST, 0);
-	gpio_set_value(SMD_FEC_PHY_RST, 0);
 	msleep(1);
-	gpio_set_value(SMD_FEC_PHY_RST, 1);
+	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
 static struct fec_platform_data mx53_evk_fec_pdata = {
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 0a18f8d23eb..6206b1191fe 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -36,6 +36,9 @@
 #include "crm_regs.h"
 #include "devices-imx53.h"
 
+#define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
+#define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
+#define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
 #define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
@@ -180,6 +183,27 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	MX53_PAD_GPIO_8__GPIO1_8,
 };
 
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
+{								\
+	.gpio		= gpio_num,				\
+	.type		= EV_KEY,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,				\
+	.wakeup		= wake,					\
+}
+
+static struct gpio_keys_button loco_buttons[] = {
+	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
+	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
+	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static const struct gpio_keys_platform_data loco_button_data __initconst = {
+	.buttons        = loco_buttons,
+	.nbuttons       = ARRAY_SIZE(loco_buttons),
+};
+
 static inline void mx53_loco_fec_reset(void)
 {
 	int ret;
@@ -215,6 +239,7 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	imx_add_gpio_keys(&loco_button_data);
 }
 
 static void __init mx53_loco_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 652ace41382..fdbc05ed551 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -865,6 +865,13 @@ static struct clk aips_tz2_clk = {
 	.disable = _clk_ccgr_disable_inwait,
 };
 
+static struct clk gpc_dvfs_clk = {
+	.enable_reg = MXC_CCM_CCGR5,
+	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable,
+};
+
 static struct clk gpt_32k_clk = {
 	.id = 0,
 	.parent = &ckil_clk,
@@ -1448,6 +1455,7 @@ static struct clk_lookup mx51_lookups[] = {
 	_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
 	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
 	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
+	_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
 };
 
 static struct clk_lookup mx53_lookups[] = {
@@ -1511,6 +1519,7 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&iim_clk);
 	mx51_revision();
 	clk_disable(&iim_clk);
+	mx51_display_revision();
 
 	/* move usb_phy_clk to 24MHz */
 	clk_set_parent(&usb_phy1_clk, &osc_clk);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index df46b5e6085..472bdfab2e5 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -21,6 +21,7 @@
 static int cpu_silicon_rev = -1;
 
 #define IIM_SREV 0x24
+#define MX50_HW_ADADIG_DIGPROG	0xB0
 
 static int get_mx51_srev(void)
 {
@@ -51,6 +52,26 @@ int mx51_revision(void)
 }
 EXPORT_SYMBOL(mx51_revision);
 
+void mx51_display_revision(void)
+{
+	int rev;
+	char *srev;
+	rev = mx51_revision();
+
+	switch (rev) {
+	case IMX_CHIP_REVISION_2_0:
+		srev = IMX_CHIP_REVISION_2_0_STRING;
+		break;
+	case IMX_CHIP_REVISION_3_0:
+		srev = IMX_CHIP_REVISION_3_0_STRING;
+		break;
+	default:
+		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
+	}
+	printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
+}
+EXPORT_SYMBOL(mx51_display_revision);
+
 #ifdef CONFIG_NEON
 
 /*
@@ -107,6 +128,44 @@ int mx53_revision(void)
 }
 EXPORT_SYMBOL(mx53_revision);
 
+static int get_mx50_srev(void)
+{
+	void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
+	u32 rev;
+
+	if (!anatop) {
+		cpu_silicon_rev = -EINVAL;
+		return 0;
+	}
+
+	rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
+	rev &= 0xff;
+
+	iounmap(anatop);
+	if (rev == 0x0)
+		return IMX_CHIP_REVISION_1_0;
+	else if (rev == 0x1)
+		return IMX_CHIP_REVISION_1_1;
+	return 0;
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx50
+ */
+int mx50_revision(void)
+{
+	if (!cpu_is_mx50())
+		return -EINVAL;
+
+	if (cpu_silicon_rev == -1)
+		cpu_silicon_rev = get_mx50_srev();
+
+	return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx50_revision);
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index c372a437369..e6c1119c20a 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -67,6 +67,10 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX51_PAD_SD1_DATA1__SD1_DATA1,
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 30)
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 868af8f435f..d0c7075937c 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -42,7 +42,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/mach-types.h>
 
 #include "devices-imx51.h"
 #include "devices.h"
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
new file mode 100644
index 00000000000..76ae8dc33e0
--- /dev/null
+++ b/arch/arm/mach-mx5/system.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include "crm_regs.h"
+
+/* set cpu low power mode before WFI instruction. This function is called
+  * mx5 because it can be used for mx50, mx51, and mx53.*/
+void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+{
+	u32 plat_lpc, arm_srpgcr, ccm_clpcr;
+	u32 empgc0, empgc1;
+	int stop_mode = 0;
+
+	/* always allow platform to issue a deep sleep mode request */
+	plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+	    ~(MXC_CORTEXA8_PLAT_LPC_DSM);
+	ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
+	arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
+	empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
+	empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+	case STOP_POWER_OFF:
+		plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
+			    | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
+		if (mode == WAIT_UNCLOCKED_POWER_OFF) {
+			ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
+			ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
+			ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
+			stop_mode = 0;
+		} else {
+			ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+			ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
+			ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
+			ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
+			stop_mode = 1;
+		}
+		arm_srpgcr |= MXC_SRPGCR_PCR;
+
+		if (tzic_enable_wake(1) != 0)
+			return;
+		break;
+	case STOP_POWER_ON:
+		ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
+		break;
+	default:
+		printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
+		return;
+	}
+
+	__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
+	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
+	__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
+
+	/* Enable NEON SRPG for all but MX50TO1.0. */
+	if (mx50_revision() != IMX_CHIP_REVISION_1_0)
+		__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+
+	if (stop_mode) {
+		empgc0 |= MXC_SRPGCR_PCR;
+		empgc1 |= MXC_SRPGCR_PCR;
+
+		__raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
+		__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+	}
+}
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4f6f174af6c..4522fbb235d 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -22,6 +22,7 @@ config MACH_MX23EVK
 	select SOC_IMX23
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	default y
 	help
@@ -35,6 +36,7 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
 	select MXS_HAVE_PLATFORM_FLEXCAN
+	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	select MXS_OCOTP
 	default y
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
index d133c7f3094..c3577ea789a 100644
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -521,6 +521,15 @@ static int clk_misc_init(void)
 	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
 			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
 
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac to get a 288 MHz ref_io.
+	 */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+	reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
+	reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+
 	return 0;
 }
 
@@ -528,6 +537,12 @@ int __init mx23_clocks_init(void)
 {
 	clk_misc_init();
 
+	/*
+	 * source ssp clock from ref_io than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	clk_set_parent(&ssp_clk, &ref_io_clk);
+
 	clk_enable(&cpu_clk);
 	clk_enable(&hbus_clk);
 	clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5e489a2b202..5dcc59d5b9e 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	unsigned long diff, parent_rate, calc_rate;			\
 	int i;								\
 									\
-	parent_rate = clk_get_rate(clk->parent);			\
 	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
 	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
 									\
 	if (clk->parent == &ref_xtal_clk) {				\
+		parent_rate = clk_get_rate(clk->parent);		\
 		div = DIV_ROUND_UP(parent_rate, rate);			\
 		if (clk == &cpu_clk) {					\
 			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
@@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 		if (div == 0 || div > div_max)				\
 			return -EINVAL;					\
 	} else {							\
+		/*							\
+		 * hack alert: this block modifies clk->parent, too,	\
+		 * so the base to use it the grand parent.		\
+		 */							\
+		parent_rate = clk_get_rate(clk->parent->parent);	\
 		rate >>= PARENT_RATE_SHIFT;				\
 		parent_rate >>= PARENT_RATE_SHIFT;			\
 		diff = parent_rate;					\
@@ -618,6 +623,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
 	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
 	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
+	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
 	_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
 	_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
 	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
@@ -737,6 +744,15 @@ static int clk_misc_init(void)
 	reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
 
+	/*
+	 * 480 MHz seems too high to be ssp clock source directly,
+	 * so set frac0 to get a 288 MHz ref_io0.
+	 */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+	reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
+	reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
+
 	return 0;
 }
 
@@ -744,6 +760,13 @@ int __init mx28_clocks_init(void)
 {
 	clk_misc_init();
 
+	/*
+	 * source ssp clock from ref_io0 than ref_xtal,
+	 * as ref_xtal only provides 24 MHz as maximum.
+	 */
+	clk_set_parent(&ssp0_clk, &ref_io0_clk);
+	clk_set_parent(&ssp1_clk, &ref_io0_clk);
+
 	clk_enable(&cpu_clk);
 	clk_enable(&hbus_clk);
 	clk_enable(&xbus_clk);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index c7e14f4e366..c6f345febd3 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -21,6 +21,10 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst;
 #define mx23_add_auart0()		mx23_add_auart(0)
 #define mx23_add_auart1()		mx23_add_auart(1)
 
+extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
+#define mx23_add_mxs_mmc(id, pdata) \
+	mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
+
 #define mx23_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
 
 struct platform_device *__init mx23_add_mxsfb(
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 9d08555c4cf..c473eddce8c 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -37,6 +37,10 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
 extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
 #define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
 
+extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
+#define mx28_add_mxs_mmc(id, pdata) \
+	mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
+
 #define mx28_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
 
 struct platform_device *__init mx28_add_mxsfb(
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index 1451ad060d8..acf9eea124c 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -15,6 +15,9 @@ config MXS_HAVE_PLATFORM_FLEXCAN
 config MXS_HAVE_PLATFORM_MXS_I2C
 	bool
 
+config MXS_HAVE_PLATFORM_MXS_MMC
+	bool
+
 config MXS_HAVE_PLATFORM_MXS_PWM
 	bool
 
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 0d9bea30b0a..324f2824d38 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -4,5 +4,6 @@ obj-y += platform-dma.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
new file mode 100644
index 00000000000..382dacbeca2
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid)			\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _SSP ## hwid ## _BASE_ADDR,		\
+		.dma = soc ## _DMA_SSP ## hwid,				\
+		.irq_err = soc ## _INT_SSP ## hwid ## _ERROR,		\
+		.irq_dma = soc ## _INT_SSP ## hwid ## _DMA,		\
+	}
+
+#define mxs_mxs_mmc_data_entry(soc, _id, hwid)				\
+	[_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid)
+
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
+	mxs_mxs_mmc_data_entry(MX23, 0, 1),
+	mxs_mxs_mmc_data_entry(MX23, 1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
+	mxs_mxs_mmc_data_entry(MX28, 0, 0),
+	mxs_mxs_mmc_data_entry(MX28, 1, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_mxs_mmc(
+		const struct mxs_mxs_mmc_data *data,
+		const struct mxs_mmc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start	= data->iobase,
+			.end	= data->iobase + SZ_8K - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= data->dma,
+			.end	= data->dma,
+			.flags	= IORESOURCE_DMA,
+		}, {
+			.start	= data->irq_err,
+			.end	= data->irq_err,
+			.flags	= IORESOURCE_IRQ,
+		}, {
+			.start	= data->irq_dma,
+			.end	= data->irq_dma,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("mxs-mmc", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 71f24484b04..c5137f14c36 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -73,6 +73,19 @@ struct mxs_i2c_data {
 };
 struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
 
+/* mmc */
+#include <mach/mmc.h>
+struct mxs_mxs_mmc_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t dma;
+	resource_size_t irq_err;
+	resource_size_t irq_dma;
+};
+struct platform_device *__init mxs_add_mxs_mmc(
+		const struct mxs_mxs_mmc_data *data,
+		const struct mxs_mmc_platform_data *pdata);
+
 /* pwm */
 struct platform_device *__init mxs_add_mxs_pwm(
 		resource_size_t iobase, int id);
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index a66994f0518..214e5b641bb 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -28,6 +28,8 @@
 
 #define MX23EVK_LCD_ENABLE	MXS_GPIO_NR(1, 18)
 #define MX23EVK_BL_ENABLE	MXS_GPIO_NR(1, 28)
+#define MX23EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
+#define MX23EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
 
 static const iomux_cfg_t mx23evk_pads[] __initconst = {
 	/* duart */
@@ -73,6 +75,36 @@ static const iomux_cfg_t mx23evk_pads[] __initconst = {
 	MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
 	/* backlight control */
 	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
+
+	/* mmc */
+	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D08__SSP1_DATA4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D09__SSP1_DATA5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D10__SSP1_DATA6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_GPMI_D11__SSP1_DATA7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_CMD__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX23_PAD_SSP1_SCK__SSP1_SCK |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX23_PAD_PWM4__GPIO_1_30 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX23_PAD_PWM3__GPIO_1_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
 /* mxsfb (lcdif) */
@@ -101,6 +133,11 @@ static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
 	.ld_intf_width	= STMLCDIF_24BIT,
 };
 
+static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
+	.wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
+	.flags = SLOTF_8_BIT_CAPABLE,
+};
+
 static void __init mx23evk_init(void)
 {
 	int ret;
@@ -110,6 +147,13 @@ static void __init mx23evk_init(void)
 	mx23_add_duart();
 	mx23_add_auart0();
 
+	/* power on mmc slot by writing 0 to the gpio */
+	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc0-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+	mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
+
 	ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
 	if (ret)
 		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 08002d02267..bb329b9a260 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -34,6 +34,11 @@
 #define MX28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 30)
 #define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
 
+#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
+#define MX28EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(3, 28)
+#define MX28EVK_MMC1_SLOT_POWER		MXS_GPIO_NR(3, 29)
+
 static const iomux_cfg_t mx28evk_pads[] __initconst = {
 	/* duart */
 	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
@@ -115,6 +120,65 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
 	MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
 	/* backlight control */
 	MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
+	/* mmc0 */
+	MX28_PAD_SSP0_DATA0__SSP0_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA1__SSP0_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA2__SSP0_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA3__SSP0_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA4__SSP0_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA5__SSP0_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA6__SSP0_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA7__SSP0_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_CMD__SSP0_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_SSP0_SCK__SSP0_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_SSP1_SCK__GPIO_2_12 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM3__GPIO_3_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* mmc1 */
+	MX28_PAD_GPMI_D00__SSP1_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D01__SSP1_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D02__SSP1_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D03__SSP1_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D04__SSP1_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D05__SSP1_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D06__SSP1_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D07__SSP1_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY1__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_WRN__SSP1_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM4__GPIO_3_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
 /* fec */
@@ -258,6 +322,18 @@ static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
 	.ld_intf_width	= STMLCDIF_24BIT,
 };
 
+static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
+	{
+		/* mmc0 */
+		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	}, {
+		/* mmc1 */
+		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	},
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -297,6 +373,19 @@ static void __init mx28evk_init(void)
 		gpio_set_value(MX28EVK_BL_ENABLE, 1);
 
 	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+
+	/* power on mmc slot by writing 0 to the gpio */
+	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc0-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
+	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+
+	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT,
+			       "mmc1-slot-power");
+	if (ret)
+		pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 }
 
 static void __init mx28evk_timer_init(void)
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c
index fa0b154da67..0fcff47009c 100644
--- a/arch/arm/mach-mxs/module-tx28.c
+++ b/arch/arm/mach-mxs/module-tx28.c
@@ -45,7 +45,7 @@ static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
 };
 
 #define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec_pads[] __initconst = {
+static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
 	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
 	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
 	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
@@ -57,7 +57,20 @@ static const iomux_cfg_t tx28_fec_pads[] __initconst = {
 	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
 };
 
-static const struct fec_platform_data tx28_fec_data __initconst = {
+static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1,
+	MX28_PAD_ENET0_COL__ENET1_TX_EN,
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
+};
+
+static struct fec_platform_data tx28_fec0_data = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct fec_platform_data tx28_fec1_data = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -108,15 +121,15 @@ int __init tx28_add_fec0(void)
 	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
 	gpio_set_value(TX28_FEC_PHY_RESET, 1);
 
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads,
-			ARRAY_SIZE(tx28_fec_pads));
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
+			ARRAY_SIZE(tx28_fec0_pads));
 	if (ret) {
 		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
 				__func__, ret);
 		goto free_gpios;
 	}
-	pr_debug("%s: Registering FEC device\n", __func__);
-	mx28_add_fec(0, &tx28_fec_data);
+	pr_debug("%s: Registering FEC0 device\n", __func__);
+	mx28_add_fec(0, &tx28_fec0_data);
 	return 0;
 
 free_gpios:
@@ -129,3 +142,19 @@ free_gpios:
 
 	return ret;
 }
+
+int __init tx28_add_fec1(void)
+{
+	int ret;
+
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
+			ARRAY_SIZE(tx28_fec1_pads));
+	if (ret) {
+		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
+				__func__, ret);
+		return ret;
+	}
+	pr_debug("%s: Registering FEC1 device\n", __func__);
+	mx28_add_fec(1, &tx28_fec1_data);
+	return 0;
+}
diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h
index df9e1b6e81b..8ed425457d3 100644
--- a/arch/arm/mach-mxs/module-tx28.h
+++ b/arch/arm/mach-mxs/module-tx28.h
@@ -7,3 +7,4 @@
  * Free Software Foundation.
  */
 int __init tx28_add_fec0(void);
+int __init tx28_add_fec1(void);
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 927d5a18176..c1c5fb6a5b4 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -79,7 +79,7 @@
 
 
 /*
- * Register useage
+ * Register usage
  * r8  - temporary
  * r9  - the driver buffer
  * r10 - temporary
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index d41fe2d0616..0ad781db4e6 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -399,7 +399,7 @@ static void __init omap_sx1_init(void)
 	sx1_mmc_init();
 
 	/* turn on USB power */
-	/* sx1_setusbpower(1); cant do it here because i2c is not ready */
+	/* sx1_setusbpower(1); can't do it here because i2c is not ready */
 	gpio_request(1, "A_IRDA_OFF");
 	gpio_request(11, "A_SWITCH");
 	gpio_request(15, "A_USB_ON");
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index b0f4c231595..36f26c3fa25 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {}
  * Claiming GPIOs, and setting their direction and initial values, is the
  * responsibility of the device drivers.  So is responding to probe().
  *
- * Board-specific knowlege like creating devices or pin setup is to be
+ * Board-specific knowledge like creating devices or pin setup is to be
  * kept out of drivers as much as possible.  In particular, pin setup
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 7a2df29400c..23eed0035ed 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -31,7 +31,7 @@
 #endif
 
 /*
- * These are the offsets from the begining of the fiq_buffer. They are put here
+ * These are the offsets from the beginning of the fiq_buffer. They are put here
  * since the buffer and header need to be accessed by drivers servicing devices
  * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
  */
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 6588c22b8a6..fe31d933f0e 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -24,75 +24,50 @@
 #ifdef CONFIG_PM_RUNTIME
 static int omap1_pm_runtime_suspend(struct device *dev)
 {
-	struct clk *iclk, *fclk;
-	int ret = 0;
+	int ret;
 
 	dev_dbg(dev, "%s\n", __func__);
 
 	ret = pm_generic_runtime_suspend(dev);
+	if (ret)
+		return ret;
 
-	fclk = clk_get(dev, "fck");
-	if (!IS_ERR(fclk)) {
-		clk_disable(fclk);
-		clk_put(fclk);
-	}
-
-	iclk = clk_get(dev, "ick");
-	if (!IS_ERR(iclk)) {
-		clk_disable(iclk);
-		clk_put(iclk);
+	ret = pm_runtime_clk_suspend(dev);
+	if (ret) {
+		pm_generic_runtime_resume(dev);
+		return ret;
 	}
 
 	return 0;
-};
+}
 
 static int omap1_pm_runtime_resume(struct device *dev)
 {
-	struct clk *iclk, *fclk;
-
 	dev_dbg(dev, "%s\n", __func__);
 
-	iclk = clk_get(dev, "ick");
-	if (!IS_ERR(iclk)) {
-		clk_enable(iclk);
-		clk_put(iclk);
-	}
+	pm_runtime_clk_resume(dev);
+	return pm_generic_runtime_resume(dev);
+}
 
-	fclk = clk_get(dev, "fck");
-	if (!IS_ERR(fclk)) {
-		clk_enable(fclk);
-		clk_put(fclk);
-	}
+static struct dev_power_domain default_power_domain = {
+	.ops = {
+		.runtime_suspend = omap1_pm_runtime_suspend,
+		.runtime_resume = omap1_pm_runtime_resume,
+		USE_PLATFORM_PM_SLEEP_OPS
+	},
+};
 
-	return pm_generic_runtime_resume(dev);
+static struct pm_clk_notifier_block platform_bus_notifier = {
+	.pwr_domain = &default_power_domain,
+	.con_ids = { "ick", "fck", NULL, },
 };
 
 static int __init omap1_pm_runtime_init(void)
 {
-	const struct dev_pm_ops *pm;
-	struct dev_pm_ops *omap_pm;
-
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	pm = platform_bus_get_pm_ops();
-	if (!pm) {
-		pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
-	if (!omap_pm) {
-		pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	omap_pm->runtime_suspend = omap1_pm_runtime_suspend;
-	omap_pm->runtime_resume = omap1_pm_runtime_resume;
-
-	platform_bus_set_pm_ops(omap_pm);
+	pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a45cd640968..66dfbccacd2 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -59,16 +59,16 @@ endif
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o \
-					   cpuidle34xx.o pm_bus.o
-obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o pm_bus.o
+					   cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
-AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
+AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 ifeq ($(CONFIG_PM_VERBOSE),y)
 CFLAGS_pm_bus.o				+= -DDEBUG
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5f8a2fd0633..34cf982b967 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -696,7 +696,7 @@ static void __init igep2_init(void)
 	igep2_init_smsc911x();
 
 	/*
-	 * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
 	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
 	 */
 	igep2_wlan_bt_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index b10db0e6ee6..2cf86c3cb1a 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -440,7 +440,7 @@ static void __init igep3_init(void)
 	igep3_leds_init();
 
 	/*
-	 * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
 	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
 	 */
 	igep3_wifi_bt_init();
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index e964895b80e..f8ba20a14e6 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -141,14 +141,19 @@ static void __init rx51_init(void)
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_3xxx();
-	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
 
+static void __init rx51_reserve(void)
+{
+	rx51_video_mem_init();
+	omap_reserve();
+}
+
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.boot_params	= 0x80000100,
-	.reserve	= omap_reserve,
+	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
 	.init_irq	= omap_init_irq,
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index b2b1e37bb6b..d6e34dd9e7e 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -115,6 +115,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  0, 0, 0, 0);
+	clk->rate = rate;
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 276992d3b7f..8c965671b4d 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dsp_fck",			&dsp_fck,	CK_443X),
 	CLK("omapdss_dss",	"sys_clk",			&dss_sys_clk,	CK_443X),
 	CLK("omapdss_dss",	"tv_clk",			&dss_tv_clk,	CK_443X),
-	CLK("omapdss_dss",	"dss_clk",			&dss_dss_clk,	CK_443X),
 	CLK("omapdss_dss",	"video_clk",			&dss_48mhz_clk,	CK_443X),
-	CLK("omapdss_dss",	"fck",				&dss_fck,	CK_443X),
-	/*
-	 * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
-	 * with OMAP2/3.
-	 */
-	CLK("omapdss_dss",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omapdss_dss",	"fck",				&dss_dss_clk,	CK_443X),
+	CLK("omapdss_dss",	"ick",				&dss_fck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
 	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index ab878545bd9..6cb6c03293d 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
  * clkdm_init - set up the clockdomain layer
  * @clkdms: optional pointer to an array of clockdomains to register
  * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
  *
  * Set up internal state.  If a pointer to an array of clockdomains
  * @clkdms was supplied, loop through the list of clockdomains,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 85b3dce6564..5823584d9cd 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -125,7 +125,7 @@ struct clockdomain {
 };
 
 /**
- * struct clkdm_ops - Arch specfic function implementations
+ * struct clkdm_ops - Arch specific function implementations
  * @clkdm_add_wkdep: Add a wakeup dependency between clk domains
  * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains
  * @clkdm_read_wkdep: Read wakeup dependency state between clk domains
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 9d0dec806e9..38830d8d478 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -247,6 +247,7 @@ struct omap3_cm_regs {
 	u32 per_cm_clksel;
 	u32 emu_cm_clksel;
 	u32 emu_cm_clkstctrl;
+	u32 pll_cm_autoidle;
 	u32 pll_cm_autoidle2;
 	u32 pll_cm_clksel4;
 	u32 pll_cm_clksel5;
@@ -319,6 +320,15 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
 	cm_context.emu_cm_clkstctrl =
 		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+	 * In this case, even though this register has been saved in
+	 * scratchpad contents, we need to restore AUTO_PERIPH_DPLL
+	 * by ourselves. So, we need to save it anyway.
+	 */
+	cm_context.pll_cm_autoidle =
+		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
 	cm_context.pll_cm_autoidle2 =
 		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
 	cm_context.pll_cm_clksel4 =
@@ -441,6 +451,13 @@ void omap3_cm_restore_context(void)
 			       CM_CLKSEL1);
 	omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
 			       OMAP2_CM_CLKSTCTRL);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+	 * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
+	 */
+	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
+			       CM_AUTOIDLE);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
 			       CM_AUTOIDLE2);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 69527941902..da53ba3917c 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void)
 			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
 	prcm_block_contents.cm_clken_pll =
 			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 */
 	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
 	prcm_block_contents.cm_clksel1_pll =
 			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
 	prcm_block_contents.cm_clksel2_pll =
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index a44c5230340..1c240eff391 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
 /**
  * omap3_cpuidle_update_states() - Update the cpuidle states
- * @mpu_deepest_state:	Enable states upto and including this for mpu domain
- * @core_deepest_state:	Enable states upto and including this for core domain
+ * @mpu_deepest_state:	Enable states up to and including this for mpu domain
+ * @core_deepest_state:	Enable states up to and including this for core domain
  *
  * This goes through the list of states available and enables and disables the
  * validity of C states based on deepest state that can be achieved for the
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 84d1b735fe8..7b855856459 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -253,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			ARRAY_SIZE(omap_keyboard_latency), 0);
 
 	if (IS_ERR(od)) {
-		WARN(1, "Cant build omap_device for %s:%s.\n",
+		WARN(1, "Can't build omap_device for %s:%s.\n",
 						name, oh->name);
 		return PTR_ERR(od);
 	}
@@ -373,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 	od = omap_device_build(name, spi_num, oh, pdata,
 				sizeof(*pdata),	omap_mcspi_latency,
 				ARRAY_SIZE(omap_mcspi_latency), 0);
-	WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n",
+	WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
 				name, oh->name);
 	kfree(pdata);
 	return 0;
@@ -725,7 +725,7 @@ static int __init omap_init_wdt(void)
 	od = omap_device_build(dev_name, id, oh, NULL, 0,
 				omap_wdt_latency,
 				ARRAY_SIZE(omap_wdt_latency), 0);
-	WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n",
+	WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
 				dev_name, oh->name);
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 34922b2d2e3..c9ff0e79703 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 			omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
 	kfree(p);
 	if (IS_ERR(od)) {
-		pr_err("%s: Cant build omap_device for %s:%s.\n",
+		pr_err("%s: Can't build omap_device for %s:%s.\n",
 			__func__, name, oh->name);
 		return PTR_ERR(od);
 	}
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 413de18c1d2..9529842ae05 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	kfree(pdata);
 
 	if (IS_ERR(od)) {
-		WARN(1, "Cant build omap_device for %s:%s.\n",
+		WARN(1, "Can't build omap_device for %s:%s.\n",
 					name, oh->name);
 		return PTR_ERR(od);
 	}
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 137e1a5f3d8..b2f30bed5a2 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 	od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
 		sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
 	if (IS_ERR(od)) {
-		WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name);
+		WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
 		kfree(mmc_data->slots[0].name);
 		goto done;
 	}
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 565b9064a32..4a6ef6ab845 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 				ARRAY_SIZE(omap2_mcbsp_latency), false);
 	kfree(pdata);
 	if (IS_ERR(od))  {
-		pr_err("%s: Cant build omap_device for %s:%s.\n", __func__,
+		pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
 					name, oh->name);
 		return PTR_ERR(od);
 	}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index bb043cbb388..a4ab1e36431 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 			seq_printf(s, "/* %s */\n", m->muxnames[mode]);
 
 		/*
-		 * XXX: Might be revisited to support differences accross
+		 * XXX: Might be revisited to support differences across
 		 * same OMAP generation.
 		 */
 		seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h
index adbea0d03e0..9fd93149ebd 100644
--- a/arch/arm/mach-omap2/mux2430.h
+++ b/arch/arm/mach-omap2/mux2430.h
@@ -22,7 +22,7 @@
  * absolute addresses.  The name in the macro is the mode-0 name of
  * the pin.  NOTE: These registers are 8-bits wide.
  *
- * Note that these defines use SDMMC instead of MMC for compability
+ * Note that these defines use SDMMC instead of MMC for compatibility
  * with signal names used in 3630.
  */
 #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET		0x000
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 8eb3ce1bbfb..c4d0ae87d62 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a860fb5024c..9682dd519f8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
 			 * I2CHS IP's do not follow the usual pattern.
 			 * prcm_reg_id alone cannot be used to program
 			 * the iclk and fclk. Needs to be handled using
-			 * additonal flags when clk handling is moved
+			 * additional flags when clk handling is moved
 			 * to hwmod framework.
 			 */
 			.module_offs = CORE_MOD,
@@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio5_irqs),
 	.main_clk	= "gpio5_fck",
@@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index b98e2dfcba2..909a84de668 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio1_irqs),
 	.main_clk	= "gpio1_ick",
@@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio2_irqs),
 	.main_clk	= "gpio2_ick",
@@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio3_irqs),
 	.main_clk	= "gpio3_ick",
@@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio4_irqs),
 	.main_clk	= "gpio4_ick",
@@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio5_irqs),
 	.main_clk	= "gpio5_ick",
@@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 	.name		= "gpio6",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio6_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio6_irqs),
 	.main_clk	= "gpio6_ick",
@@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 3e88dd3f8ef..abc548a0c98 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
 static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x4a056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x4a056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index 5f2da7565b6..4321e793892 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
 		/* No timeout error for debug sources */
 	}
 
-	base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source)));
-
 	/* identify the error source */
 	for (err_source = 0; !(status & (1 << err_source)); err_source++)
 									;
+
+	base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
 	error = omap3_l3_readll(base, L3_ERROR_LOG);
 
 	if (error) {
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index e2e605fe913..05f6abc96b0 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on)
 		else
 			/*
 			 * Enable VBUS Valid, AValid and IDDIG
-			 * high impedence
+			 * high impedance
 			 */
 			__raw_writel(IDDIG | AVALID | VBUSVALID,
 						ctrl_base + USBOTGHS_CONTROL);
 	} else {
-		/* Enable session END and IDIG to high impedence. */
+		/* Enable session END and IDIG to high impedance. */
 		__raw_writel(SESSEND | IDDIG, ctrl_base +
 					USBOTGHS_CONTROL);
 	}
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 0a8e74e3e81..07d6140baa9 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -308,7 +308,7 @@ int __init omap3_twl_init(void)
  * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
  * in those scenarios this bit is to be cleared (enable = false).
  *
- * Returns 0 on sucess, error is returned if I2C read/write fails.
+ * Returns 0 on success, error is returned if I2C read/write fails.
  */
 int __init omap3_twl_set_sr_bit(bool enable)
 {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 30af3351c2d..49486f522dc 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void)
 	if (cpu_is_omap44xx()) {
 		_init_omap_device("l3_main_1", &l3_dev);
 		_init_omap_device("dsp", &dsp_dev);
+		_init_omap_device("iva", &iva_dev);
 	} else {
 		_init_omap_device("l3_main", &l3_dev);
 	}
diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c
deleted file mode 100644
index 5acd2ab298b..00000000000
--- a/arch/arm/mach-omap2/pm_bus.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Runtime PM support code for OMAP
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-
-#ifdef CONFIG_PM_RUNTIME
-static int omap_pm_runtime_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int r, ret = 0;
-
-	dev_dbg(dev, "%s\n", __func__);
-
-	ret = pm_generic_runtime_suspend(dev);
-
-	if (!ret && dev->parent == &omap_device_parent) {
-		r = omap_device_idle(pdev);
-		WARN_ON(r);
-	}
-
-	return ret;
-};
-
-static int omap_pm_runtime_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int r;
-
-	dev_dbg(dev, "%s\n", __func__);
-
-	if (dev->parent == &omap_device_parent) {
-		r = omap_device_enable(pdev);
-		WARN_ON(r);
-	}
-
-	return pm_generic_runtime_resume(dev);
-};
-#else
-#define omap_pm_runtime_suspend NULL
-#define omap_pm_runtime_resume NULL
-#endif /* CONFIG_PM_RUNTIME */
-
-static int __init omap_pm_runtime_init(void)
-{
-	const struct dev_pm_ops *pm;
-	struct dev_pm_ops *omap_pm;
-
-	pm = platform_bus_get_pm_ops();
-	if (!pm) {
-		pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
-	if (!omap_pm) {
-		pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	omap_pm->runtime_suspend = omap_pm_runtime_suspend;
-	omap_pm->runtime_resume = omap_pm_runtime_resume;
-
-	platform_bus_set_pm_ops(omap_pm);
-
-	return 0;
-}
-core_initcall(omap_pm_runtime_init);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 49c6513e90d..9af08473bf1 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
 /**
  * pwrdm_init - set up the powerdomain layer
  * @pwrdm_list: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
  *
  * Loop through the array of powerdomains @pwrdm_list, registering all
  * that are available on the current CPU. If pwrdm_list is supplied
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 027f40bd235..d23d979b9c3 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -121,7 +121,7 @@ struct powerdomain {
 };
 
 /**
- * struct pwrdm_ops - Arch specfic function implementations
+ * struct pwrdm_ops - Arch specific function implementations
  * @pwrdm_set_next_pwrst: Set the target power state for a pd
  * @pwrdm_read_next_pwrst: Read the target power state set for a pd
  * @pwrdm_read_pwrst: Read the current power state of a pd
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 9c9c113788b..469a920a74d 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = {
 
 /*
  * The USBTLL Save-and-Restore mechanism is broken on
- * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
+ * 3430s up to ES3.0 and 3630ES1.0. Hence this feature
  * needs to be disabled on these chips.
  * Refer: 3430 errata ID i459 and 3630 errata ID i579
  *
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 8f674c9442b..13e24f913dd 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
  * driver register and sr device intializtion API's. Only one call
  * will ultimately succeed.
  *
- * Currenly this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrrupt handler for a particular SR
  * if smartreflex class driver is already registered and has
  * requested for interrupts and the SR interrupt line in present.
  */
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index c6facf7becf..0c1552d9d99 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
 	sys_clk_speed /= 1000;
 
 	/* Generic voltage parameters */
-	vdd->curr_volt = 1200000;
 	vdd->volt_scale = vp_forceupdate_scale_voltage;
 	vdd->vp_enabled = false;
 
@@ -851,7 +850,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
  * @voltdm:	pointer to the VDD whose voltage is to be reset.
  *
  * This API finds out the correct voltage the voltage domain is supposed
- * to be at and resets the voltage to that level. Should be used expecially
+ * to be at and resets the voltage to that level. Should be used especially
  * while disabling any voltage compensation modules.
  */
 void omap_voltage_reset(struct voltagedomain *voltdm)
@@ -912,7 +911,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm,
  * This API searches only through the non-compensated voltages int the
  * voltage table.
  * Returns pointer to the voltage table entry corresponding to volt on
- * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage
+ * success. Returns -ENODATA if no voltage table exisits for the passed voltage
  * domain or if there is no matching entry.
  */
 struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 1a5d6a0e260..5ceafdccc45 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -19,7 +19,7 @@
 #include "common.h"
 
 /*
- * The Orion has fully programable address map. There's a separate address
+ * The Orion has fully programmable address map. There's a separate address
  * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
  * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
  * address decode windows that allow it to access any of the Orion resources.
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 429ecafe9fd..a5930f83958 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -190,7 +190,7 @@ err_free_1:
  * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
  * single GPIO line and are compatible with the leds-gpio driver.
  *
- * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * The SATA blue LEDs have some hardware blink capabilities which are detailed
  * in the following array:
  *
  * SATAx blue LED | SATAx activity | LED state
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index f0f43e13ac8..e6d64494d3d 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -36,7 +36,7 @@
 
 /****************************************************************************
  * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
+ *     partitions on the device because we want to keep compatibility with
  *     existing QNAP firmware.
  *
  * Layout as used by QNAP:
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 92f393f08fa..9eac8192d92 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -56,7 +56,7 @@
 
 /****************************************************************************
  * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
+ *     partitions on the device because we want to keep compatibility with
  *     existing QNAP firmware.
  *
  * Layout as used by QNAP:
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 8554707d20a..edb1dd2d161 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -402,7 +402,7 @@ static void ts78xx_fpga_supports(void)
 		/* enable devices if magic matches */
 		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
 		case TS7800_FPGA_MAGIC:
-			printk(KERN_WARNING "TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+			pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
 					ts78xx_fpga.id & 0xff);
 			ts78xx_fpga.supports.ts_rtc.present = 1;
 			ts78xx_fpga.supports.ts_nand.present = 1;
@@ -423,7 +423,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
 		tmp = ts78xx_ts_rtc_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: RTC not registered\n");
+			pr_info("TS-78xx: RTC not registered\n");
 			ts78xx_fpga.supports.ts_rtc.present = 0;
 		}
 		ret |= tmp;
@@ -431,7 +431,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_nand.present == 1) {
 		tmp = ts78xx_ts_nand_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: NAND not registered\n");
+			pr_info("TS-78xx: NAND not registered\n");
 			ts78xx_fpga.supports.ts_nand.present = 0;
 		}
 		ret |= tmp;
@@ -439,7 +439,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rng.present == 1) {
 		tmp = ts78xx_ts_rng_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx: RNG not registered\n");
+			pr_info("TS-78xx: RNG not registered\n");
 			ts78xx_fpga.supports.ts_rng.present = 0;
 		}
 		ret |= tmp;
@@ -466,7 +466,7 @@ static int ts78xx_fpga_load(void)
 {
 	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
 
-	printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+	pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff,
 			ts78xx_fpga.id & 0xff);
 
@@ -494,7 +494,7 @@ static int ts78xx_fpga_unload(void)
 	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
 	 */
 	if (ts78xx_fpga.id != fpga_id) {
-		printk(KERN_ERR	"TS-78xx FPGA: magic/rev mismatch\n"
+		pr_err("TS-78xx FPGA: magic/rev mismatch\n"
 			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
 			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
 			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +525,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	int value, ret;
 
 	if (ts78xx_fpga.state < 0) {
-		printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+		pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
 		return -EBUSY;
 	}
 
@@ -534,7 +534,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
 	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
 		value = 0;
 	else {
-		printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+		pr_err("ts78xx_fpga_store: Invalid value\n");
 		return -EINVAL;
 	}
 
@@ -616,7 +616,7 @@ static void __init ts78xx_init(void)
 	ret = ts78xx_fpga_load();
 	ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
 	if (ret)
-		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+		pr_err("sysfs_create_file failed: %d\n", ret);
 }
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 3499fada73a..4cb069fd9af 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -128,8 +128,8 @@ static int am200_init_gpio_regs(struct metronomefb_par *par)
 	return 0;
 
 err_req_gpio:
-	while (i > 0)
-		gpio_free(gpios[i--]);
+	while (--i >= 0)
+		gpio_free(gpios[i]);
 
 	return err;
 }
@@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = {
 };
 
 /* this gets called as part of our init. these steps must be done now so
- * that we can use set_pxa_fb_info */
+ * that we can use pxa_set_fb_info */
 static void __init am200_presetup_fb(void)
 {
 	int fw;
@@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void)
 	/* we divide since we told the LCD controller we're 16bpp */
 	am200_fb_info.modes->xres /= 2;
 
-	set_pxa_fb_info(&am200_fb_info);
+	pxa_set_fb_info(NULL, &am200_fb_info);
 
 }
 
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 993d75e6639..fa8bad235d9 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -125,10 +125,7 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 		if (err) {
 			dev_err(&am300_device->dev, "failed requesting "
 				"gpio %d, err=%d\n", i, err);
-			while (i >= DB0_GPIO_PIN)
-				gpio_free(i--);
-			i = ARRAY_SIZE(gpios) - 1;
-			goto err_req_gpio;
+			goto err_req_gpio2;
 		}
 	}
 
@@ -159,9 +156,13 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 
 	return 0;
 
+err_req_gpio2:
+	while (--i >= DB0_GPIO_PIN)
+		gpio_free(i);
+	i = ARRAY_SIZE(gpios);
 err_req_gpio:
-	while (i > 0)
-		gpio_free(gpios[i--]);
+	while (--i >= 0)
+		gpio_free(gpios[i]);
 
 	return err;
 }
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 38dea05df7f..810a982a66f 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -15,7 +15,6 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
@@ -263,7 +262,7 @@ static void __init balloon3_lcd_init(void)
 	}
 
 	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	set_pxa_fb_info(&balloon3_lcd_screen);
+	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
 	return;
 
 err2:
diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c
index 1ce09044849..1d5859d9a0e 100644
--- a/arch/arm/mach-pxa/clock-pxa2xx.c
+++ b/arch/arm/mach-pxa/clock-pxa2xx.c
@@ -9,7 +9,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/pxa2xx-regs.h>
 
@@ -33,32 +33,22 @@ const struct clkops clk_pxa2xx_cken_ops = {
 #ifdef CONFIG_PM
 static uint32_t saved_cken;
 
-static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state)
+static int pxa2xx_clock_suspend(void)
 {
 	saved_cken = CKEN;
 	return 0;
 }
 
-static int pxa2xx_clock_resume(struct sys_device *d)
+static void pxa2xx_clock_resume(void)
 {
 	CKEN = saved_cken;
-	return 0;
 }
 #else
 #define pxa2xx_clock_suspend	NULL
 #define pxa2xx_clock_resume	NULL
 #endif
 
-struct sysdev_class pxa2xx_clock_sysclass = {
-	.name		= "pxa2xx-clock",
+struct syscore_ops pxa2xx_clock_syscore_ops = {
 	.suspend	= pxa2xx_clock_suspend,
 	.resume		= pxa2xx_clock_resume,
 };
-
-static int __init pxa2xx_clock_init(void)
-{
-	if (cpu_is_pxa2xx())
-		return sysdev_class_register(&pxa2xx_clock_sysclass);
-	return 0;
-}
-postcore_initcall(pxa2xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
index 3f864cd0bd2..2a37a9a8f62 100644
--- a/arch/arm/mach-pxa/clock-pxa3xx.c
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/smemc.h>
 #include <mach/pxa3xx-regs.h>
@@ -182,7 +183,7 @@ const struct clkops clk_pxa3xx_pout_ops = {
 static uint32_t cken[2];
 static uint32_t accr;
 
-static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
+static int pxa3xx_clock_suspend(void)
 {
 	cken[0] = CKENA;
 	cken[1] = CKENB;
@@ -190,28 +191,18 @@ static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
 	return 0;
 }
 
-static int pxa3xx_clock_resume(struct sys_device *d)
+static void pxa3xx_clock_resume(void)
 {
 	ACCR = accr;
 	CKENA = cken[0];
 	CKENB = cken[1];
-	return 0;
 }
 #else
 #define pxa3xx_clock_suspend	NULL
 #define pxa3xx_clock_resume	NULL
 #endif
 
-struct sysdev_class pxa3xx_clock_sysclass = {
-	.name		= "pxa3xx-clock",
+struct syscore_ops pxa3xx_clock_syscore_ops = {
 	.suspend	= pxa3xx_clock_suspend,
 	.resume		= pxa3xx_clock_resume,
 };
-
-static int __init pxa3xx_clock_init(void)
-{
-	if (cpu_is_pxa3xx() || cpu_is_pxa95x())
-		return sysdev_class_register(&pxa3xx_clock_sysclass);
-	return 0;
-}
-postcore_initcall(pxa3xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index f9f349a21b5..1f2fb9c43f0 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,5 +1,5 @@
 #include <linux/clkdev.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 struct clkops {
 	void			(*enable)(struct clk *);
@@ -54,7 +54,7 @@ extern const struct clkops clk_pxa2xx_cken_ops;
 void clk_pxa2xx_cken_enable(struct clk *clk);
 void clk_pxa2xx_cken_disable(struct clk *clk);
 
-extern struct sysdev_class pxa2xx_clock_sysclass;
+extern struct syscore_ops pxa2xx_clock_syscore_ops;
 
 #if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
 #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
@@ -74,5 +74,6 @@ extern const struct clkops clk_pxa3xx_smemc_ops;
 extern void clk_pxa3xx_cken_enable(struct clk *);
 extern void clk_pxa3xx_cken_disable(struct clk *);
 
-extern struct sysdev_class pxa3xx_clock_sysclass;
+extern struct syscore_ops pxa3xx_clock_syscore_ops;
+
 #endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index b88d601a809..13518a70539 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b734d846816..a1099678247 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -10,7 +10,7 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
@@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display);
 
 static void __init cmx2xx_init_display(void)
 {
-	set_pxa_fb_info(cmx2xx_display);
+	pxa_set_fb_info(NULL, cmx2xx_display);
 }
 #else
 static inline void cmx2xx_init_display(void) {}
@@ -388,7 +388,7 @@ static inline void cmx2xx_init_display(void) {}
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
-static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
+static int cmx2xx_suspend(void)
 {
 	cmx2xx_pci_suspend();
 
@@ -412,7 +412,7 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int cmx2xx_resume(struct sys_device *dev)
+static void cmx2xx_resume(void)
 {
 	cmx2xx_pci_resume();
 
@@ -420,27 +420,18 @@ static int cmx2xx_resume(struct sys_device *dev)
 	__raw_writel(sleep_save_msc[0], MSC0);
 	__raw_writel(sleep_save_msc[1], MSC1);
 	__raw_writel(sleep_save_msc[2], MSC2);
-
-	return 0;
 }
 
-static struct sysdev_class cmx2xx_pm_sysclass = {
-	.name = "pm",
+static struct syscore_ops cmx2xx_pm_syscore_ops = {
 	.resume = cmx2xx_resume,
 	.suspend = cmx2xx_suspend,
 };
 
-static struct sys_device cmx2xx_pm_device = {
-	.cls = &cmx2xx_pm_sysclass,
-};
-
 static int __init cmx2xx_pm_init(void)
 {
-	int error;
-	error = sysdev_class_register(&cmx2xx_pm_sysclass);
-	if (error == 0)
-		error = sysdev_register(&cmx2xx_pm_device);
-	return error;
+	register_syscore_ops(&cmx2xx_pm_syscore_ops);
+
+	return 0;
 }
 #else
 static int __init cmx2xx_pm_init(void) { return 0; }
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 06d0a03f462..b2248e76ec8 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = {
 
 static void __init cm_x300_init_lcd(void)
 {
-	set_pxa_fb_info(&cm_x300_lcd);
+	pxa_set_fb_info(NULL, &cm_x300_lcd);
 }
 #else
 static inline void cm_x300_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 81c3c433e2d..d28e802e244 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index ee797397dc5..80538b8806e 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/sysdev.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -175,7 +174,7 @@ static struct pxafb_mach_info income_lcd_screen = {
 
 static void __init income_lcd_init(void)
 {
-	set_pxa_fb_info(&income_lcd_screen);
+	pxa_set_fb_info(NULL, &income_lcd_screen);
 }
 #else
 static inline void income_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 6fc5d328ba7..7545a48ed88 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/ucb1400.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 96b2d9fbfef..3f9be419959 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 	lcd_bl_pin = bl_pin;
 	gpio_request(bl_pin, "lcd backlight");
 	gpio_direction_output(bl_pin, 0);
-	set_pxa_fb_info(&sharp_lq43_info);
+	pxa_set_fb_info(NULL, &sharp_lq43_info);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index d4e705caefe..3a5507e3191 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -462,7 +462,6 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index c4bf08b3eb6..2e0425404de 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -90,7 +90,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 
 static struct pxa2xx_udc_mach_info pxa_udc_info = {
 	.gpio_pullup = -1,
-	.gpio_vbus   = -1,
 };
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
@@ -188,16 +187,12 @@ struct platform_device pxa_device_fb = {
 	.resource	= pxafb_resources,
 };
 
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
 {
+	pxa_device_fb.dev.parent = parent;
 	pxa_register_device(&pxa_device_fb, info);
 }
 
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
-	pxa_device_fb.dev.parent = parent_dev;
-}
-
 static struct resource pxa_resource_ffuart[] = {
 	{
 		.start	= 0x40100000,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index b411d7cbf5a..f8a6e9d79a3 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = {
 
 static void __init em_x270_init_lcd(void)
 {
-	set_pxa_fb_info(&em_x270_lcd);
+	pxa_set_fb_info(NULL, &em_x270_lcd);
 }
 #else
 static inline void em_x270_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index edca0a04329..2e3970fdde0 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,6 +20,7 @@
 #include <linux/mfd/t7l66xb.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <video/w100fb.h>
 
@@ -51,12 +52,20 @@ void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
-struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+struct gpio_vbus_mach_info e7xx_udc_info = {
 	.gpio_vbus   = GPIO_E7XX_USB_DISC,
 	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
 	.gpio_pullup_inverted = 1
 };
 
+static struct platform_device e7xx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e7xx_udc_info,
+	},
+};
+
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
 	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
@@ -165,6 +174,7 @@ static struct platform_device e330_tc6387xb_device = {
 
 static struct platform_device *e330_devices[] __initdata = {
 	&e330_tc6387xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e330_init(void)
@@ -175,7 +185,6 @@ static void __init e330_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E330, "Toshiba e330")
@@ -214,6 +223,7 @@ static struct platform_device e350_t7l66xb_device = {
 
 static struct platform_device *e350_devices[] __initdata = {
 	&e350_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e350_init(void)
@@ -224,7 +234,6 @@ static void __init e350_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E350, "Toshiba e350")
@@ -333,6 +342,7 @@ static struct platform_device e400_t7l66xb_device = {
 
 static struct platform_device *e400_devices[] __initdata = {
 	&e400_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e400_init(void)
@@ -344,9 +354,8 @@ static void __init e400_init(void)
 	/* Fixme - e400 may have a switched clock */
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
-	set_pxa_fb_info(&e400_pxafb_mach_info);
+	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E400, "Toshiba e400")
@@ -519,6 +528,7 @@ static struct platform_device e740_t7l66xb_device = {
 static struct platform_device *e740_devices[] __initdata = {
 	&e740_fb_device,
 	&e740_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e740_init(void)
@@ -532,7 +542,6 @@ static void __init e740_init(void)
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
@@ -711,6 +720,7 @@ static struct platform_device e750_tc6393xb_device = {
 static struct platform_device *e750_devices[] __initdata = {
 	&e750_fb_device,
 	&e750_tc6393xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e750_init(void)
@@ -723,7 +733,6 @@ static void __init e750_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
@@ -873,12 +882,21 @@ static struct platform_device e800_fb_device = {
 
 /* --------------------------- UDC definitions --------------------------- */
 
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+static struct gpio_vbus_mach_info e800_udc_info = {
 	.gpio_vbus   = GPIO_E800_USB_DISC,
 	.gpio_pullup = GPIO_E800_USB_PULLUP,
 	.gpio_pullup_inverted = 1
 };
 
+static struct platform_device e800_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e800_udc_info,
+	},
+};
+
+
 /* ----------------- e800 tc6393xb parameters ------------------ */
 
 static struct tc6393xb_platform_data e800_tc6393xb_info = {
@@ -907,6 +925,7 @@ static struct platform_device e800_tc6393xb_device = {
 static struct platform_device *e800_devices[] __initdata = {
 	&e800_fb_device,
 	&e800_tc6393xb_device,
+	&e800_gpio_vbus,
 };
 
 static void __init e800_init(void)
@@ -919,7 +938,6 @@ static void __init e800_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_udc_info(&e800_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 }
 
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 93f05e02431..d88aed8fbe1 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -783,7 +783,7 @@ static void __init a780_init(void)
 
 	pxa_set_i2c_info(NULL);
 
-	set_pxa_fb_info(&ezx_fb_info_1);
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
@@ -853,7 +853,7 @@ static void __init e680_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_1);
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
@@ -918,7 +918,7 @@ static void __init a1200_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
@@ -1103,7 +1103,7 @@ static void __init a910_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
@@ -1173,7 +1173,7 @@ static void __init e6_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
@@ -1212,7 +1212,7 @@ static void __init e2_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index a079d8baa45..e6c9344a95a 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -61,10 +61,10 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
 #endif
 
-extern struct sysdev_class pxa_irq_sysclass;
-extern struct sysdev_class pxa_gpio_sysclass;
-extern struct sysdev_class pxa2xx_mfp_sysclass;
-extern struct sysdev_class pxa3xx_mfp_sysclass;
+extern struct syscore_ops pxa_irq_syscore_ops;
+extern struct syscore_ops pxa_gpio_syscore_ops;
+extern struct syscore_ops pxa2xx_mfp_syscore_ops;
+extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 
 void __init pxa_set_ffuart_info(void *info);
 void __init pxa_set_btuart_info(void *info);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 6fd319ea528..d65e4bde9b9 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void)
 #endif
 
 #ifdef CONFIG_USB_GADGET_PXA25X
-static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
+static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
 };
 
+static struct platform_device gumstix_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gumstix_udc_info,
+	},
+};
+
 static void __init gumstix_udc_init(void)
 {
-	pxa_set_udc_info(&gumstix_udc_info);
+	platform_device_register(&gumstix_gpio_vbus);
 }
 #else
 static void gumstix_udc_init(void)
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6de0ad0eea6..9cdcca59792 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
 		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
 	.consumer_supplies      = bq24022_consumers,
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index dd40e4a9291..f7fb64f11a7 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -167,7 +167,7 @@ static void __init idp_init(void)
 
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
-	set_pxa_fb_info(&sharp_lm8v31);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&idp_mci_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index b024a8b3743..c4639502efc 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -99,11 +99,24 @@
 #define GAFR(x)		GPIO_REG(0x54 + (((x) & 0x70) >> 2))
 
 
-#define NR_BUILTIN_GPIO 128
+#define NR_BUILTIN_GPIO		PXA_GPIO_IRQ_NUM
 
 #define gpio_to_bank(gpio)	((gpio) >> 5)
 #define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
-#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	int gpio;
+
+	if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1)
+		return irq - IRQ_GPIO0;
+
+	gpio = irq - PXA_GPIO_IRQ_BASE;
+	if (gpio >= 2 && gpio < NR_BUILTIN_GPIO)
+		return gpio;
+
+	return -1;
+}
 
 #ifdef CONFIG_CPU_PXA26x
 /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index a4285fc0087..038402404e3 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -93,9 +93,6 @@
 #define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
 #define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
 
-#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
-#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
-
 /*
  * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2bbcf70dd93..0d4700a7961 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -44,6 +44,11 @@
 #define GPIO_NR_PALMZ72_BT_POWER		17
 #define GPIO_NR_PALMZ72_BT_RESET		83
 
+/* Camera */
+#define GPIO_NR_PALMZ72_CAM_PWDN		56
+#define GPIO_NR_PALMZ72_CAM_RESET		57
+#define GPIO_NR_PALMZ72_CAM_POWER		91
+
 /** Initial values **/
 
 /* Battery */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index e4fb4668c26..207ecb49a61 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -38,7 +38,7 @@
 #define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
 
 /*
- * Slave Power Managment Unit
+ * Slave Power Management Unit
  */
 #define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
 #define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 160ec83f51a..01a45ac4811 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -154,8 +154,8 @@ struct pxafb_mach_info {
 	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
 	void (*smart_update)(struct fb_info *);
 };
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
 unsigned long pxafb_get_hsync_time(struct device *dev);
 
 extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
index 8835c16bc82..7b0f71ef316 100644
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -25,8 +25,7 @@
 #define	GPIO98_ZIPITZ2_LID_BUTTON	98
 
 /* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_RESET	14
-#define	GPIO15_ZIPITZ2_WIFI_POWER	15
+#define	GPIO14_ZIPITZ2_WIFI_POWER	14
 #define	GPIO24_ZIPITZ2_WIFI_CS		24
 #define	GPIO36_ZIPITZ2_WIFI_IRQ		36
 
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index faa408ab7ad..0641f31a56b 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -64,7 +64,7 @@
 
 /*
  * CPLD registers:
- * Only 4 registers, but spreaded over a 32MB address space.
+ * Only 4 registers, but spread over a 32MB address space.
  * Be gentle, and remap that over 32kB...
  */
 
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 6251e3f5c62..32ed551bf9c 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 
@@ -183,7 +183,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
 static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
 
-static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa_irq_suspend(void)
 {
 	int i;
 
@@ -202,7 +202,7 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int pxa_irq_resume(struct sys_device *dev)
+static void pxa_irq_resume(void)
 {
 	int i;
 
@@ -218,22 +218,13 @@ static int pxa_irq_resume(struct sys_device *dev)
 			__raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
 
 	__raw_writel(1, IRQ_BASE + ICCR);
-	return 0;
 }
 #else
 #define pxa_irq_suspend		NULL
 #define pxa_irq_resume		NULL
 #endif
 
-struct sysdev_class pxa_irq_sysclass = {
-	.name		= "irq",
+struct syscore_ops pxa_irq_syscore_ops = {
 	.suspend	= pxa_irq_suspend,
 	.resume		= pxa_irq_resume,
 };
-
-static int __init pxa_irq_init(void)
-{
-	return sysdev_class_register(&pxa_irq_sysclass);
-}
-
-core_initcall(pxa_irq_init);
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 87c1ed9ccd2..e5e326d2cdc 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
 
 static void littleton_init_lcd(void)
 {
-	set_pxa_fb_info(&littleton_lcd_info);
+	pxa_set_fb_info(NULL, &littleton_lcd_info);
 }
 #else
 static inline void littleton_init_lcd(void) {};
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 6307f70ae22..6cf8180bf5b 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -15,7 +15,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
@@ -159,30 +159,22 @@ static void __init lpd270_init_irq(void)
 
 
 #ifdef CONFIG_PM
-static int lpd270_irq_resume(struct sys_device *dev)
+static void lpd270_irq_resume(void)
 {
 	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-	return 0;
 }
 
-static struct sysdev_class lpd270_irq_sysclass = {
-	.name = "cpld_irq",
+static struct syscore_ops lpd270_irq_syscore_ops = {
 	.resume = lpd270_irq_resume,
 };
 
-static struct sys_device lpd270_irq_device = {
-	.cls = &lpd270_irq_sysclass,
-};
-
 static int __init lpd270_irq_device_init(void)
 {
-	int ret = -ENODEV;
 	if (machine_is_logicpd_pxa270()) {
-		ret = sysdev_class_register(&lpd270_irq_sysclass);
-		if (ret == 0)
-			ret = sysdev_register(&lpd270_irq_device);
+		register_syscore_ops(&lpd270_irq_syscore_ops);
+		return 0;
 	}
-	return ret;
+	return -ENODEV;
 }
 
 device_initcall(lpd270_irq_device_init);
@@ -480,7 +472,7 @@ static void __init lpd270_init(void)
 	pxa_set_ac97_info(NULL);
 
 	if (lpd270_lcd_to_use != NULL)
-		set_pxa_fb_info(lpd270_lcd_to_use);
+		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
 
 	pxa_set_ohci_info(&lpd270_ohci_platform_data);
 }
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0fea945dd6f..e10ddb82714 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/major.h>
 #include <linux/fb.h>
 #include <linux/interrupt.h>
@@ -176,31 +176,22 @@ static void __init lubbock_init_irq(void)
 
 #ifdef CONFIG_PM
 
-static int lubbock_irq_resume(struct sys_device *dev)
+static void lubbock_irq_resume(void)
 {
 	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-	return 0;
 }
 
-static struct sysdev_class lubbock_irq_sysclass = {
-	.name = "cpld_irq",
+static struct syscore_ops lubbock_irq_syscore_ops = {
 	.resume = lubbock_irq_resume,
 };
 
-static struct sys_device lubbock_irq_device = {
-	.cls = &lubbock_irq_sysclass,
-};
-
 static int __init lubbock_irq_device_init(void)
 {
-	int ret = -ENODEV;
-
 	if (machine_is_lubbock()) {
-		ret = sysdev_class_register(&lubbock_irq_sysclass);
-		if (ret == 0)
-			ret = sysdev_register(&lubbock_irq_device);
+		register_syscore_ops(&lubbock_irq_syscore_ops);
+		return 0;
 	}
-	return ret;
+	return -ENODEV;
 }
 
 device_initcall(lubbock_irq_device_init);
@@ -521,7 +512,7 @@ static void __init lubbock_init(void)
 
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
-	set_pxa_fb_info(&sharp_lm8v31);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
 	pxa_set_ficp_info(&lubbock_ficp_platform_data);
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5535991c4a3..9984ef70bd7 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
 		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
 	.consumer_supplies      = bq24022_consumers,
@@ -757,7 +757,7 @@ static void __init magician_init(void)
 		gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
 		gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
 		gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info);
+		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
 }
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 29b6e7a94e1..3479e2b3b51 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -15,7 +15,7 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
@@ -185,31 +185,21 @@ static void __init mainstone_init_irq(void)
 
 #ifdef CONFIG_PM
 
-static int mainstone_irq_resume(struct sys_device *dev)
+static void mainstone_irq_resume(void)
 {
 	MST_INTMSKENA = mainstone_irq_enabled;
-	return 0;
 }
 
-static struct sysdev_class mainstone_irq_sysclass = {
-	.name = "cpld_irq",
+static struct syscore_ops mainstone_irq_syscore_ops = {
 	.resume = mainstone_irq_resume,
 };
 
-static struct sys_device mainstone_irq_device = {
-	.cls = &mainstone_irq_sysclass,
-};
-
 static int __init mainstone_irq_device_init(void)
 {
-	int ret = -ENODEV;
+	if (machine_is_mainstone())
+		register_syscore_ops(&mainstone_irq_syscore_ops);
 
-	if (machine_is_mainstone()) {
-		ret = sysdev_class_register(&mainstone_irq_sysclass);
-		if (ret == 0)
-			ret = sysdev_register(&mainstone_irq_device);
-	}
-	return ret;
+	return 0;
 }
 
 device_initcall(mainstone_irq_device_init);
@@ -592,7 +582,7 @@ static void __init mainstone_init(void)
 	else
 		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
 
-	set_pxa_fb_info(&mainstone_pxafb_info);
+	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
 	mainstone_backlight_register();
 
 	pxa_set_mci_info(&mainstone_mci_platform_data);
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 1d1419b7345..87ae3129f4f 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/gpio.h>
 #include <mach/pxa2xx-regs.h>
@@ -338,7 +338,7 @@ static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
 static unsigned long saved_pgsr[4];
 
-static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+static int pxa2xx_mfp_suspend(void)
 {
 	int i;
 
@@ -365,7 +365,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 	return 0;
 }
 
-static int pxa2xx_mfp_resume(struct sys_device *d)
+static void pxa2xx_mfp_resume(void)
 {
 	int i;
 
@@ -376,15 +376,13 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
 		PGSR(i) = saved_pgsr[i];
 	}
 	PSSR = PSSR_RDH | PSSR_PH;
-	return 0;
 }
 #else
 #define pxa2xx_mfp_suspend	NULL
 #define pxa2xx_mfp_resume	NULL
 #endif
 
-struct sysdev_class pxa2xx_mfp_sysclass = {
-	.name		= "mfp",
+struct syscore_ops pxa2xx_mfp_syscore_ops = {
 	.suspend	= pxa2xx_mfp_suspend,
 	.resume		= pxa2xx_mfp_resume,
 };
@@ -409,6 +407,6 @@ static int __init pxa2xx_mfp_init(void)
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
 		gpdr_lpm[i] = GPDR(i * 32);
 
-	return sysdev_class_register(&pxa2xx_mfp_sysclass);
+	return 0;
 }
 postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 7a270eecd48..89863a01ecd 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -17,7 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
 #include <mach/mfp-pxa3xx.h>
@@ -31,13 +31,13 @@
  * a pull-down mode if they're an active low chip select, and we're
  * just entering standby.
  */
-static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+static int pxa3xx_mfp_suspend(void)
 {
 	mfp_config_lpm();
 	return 0;
 }
 
-static int pxa3xx_mfp_resume(struct sys_device *d)
+static void pxa3xx_mfp_resume(void)
 {
 	mfp_config_run();
 
@@ -47,24 +47,13 @@ static int pxa3xx_mfp_resume(struct sys_device *d)
 	 * preserve them here in case they will be referenced later
 	 */
 	ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-	return 0;
 }
 #else
 #define pxa3xx_mfp_suspend	NULL
 #define pxa3xx_mfp_resume	NULL
 #endif
 
-struct sysdev_class pxa3xx_mfp_sysclass = {
-	.name		= "mfp",
+struct syscore_ops pxa3xx_mfp_syscore_ops = {
 	.suspend	= pxa3xx_mfp_suspend,
-	.resume 	= pxa3xx_mfp_resume,
+	.resume		= pxa3xx_mfp_resume,
 };
-
-static int __init mfp_init_devicefs(void)
-{
-	if (cpu_is_pxa3xx())
-		return sysdev_class_register(&pxa3xx_mfp_sysclass);
-
-	return 0;
-}
-postcore_initcall(mfp_init_devicefs);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 78d98a8607e..e3470137c93 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -458,7 +458,7 @@ static struct platform_device strataflash = {
 /*
  * Suspend/Resume bootstrap management
  *
- * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
+ * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
  * this sequence is as follows :
  *   - disables interrupts
  *   - initialize SDRAM (self refresh RAM into active RAM)
@@ -488,7 +488,7 @@ static void install_bootstrap(void)
 }
 
 
-static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+static int mioa701_sys_suspend(void)
 {
 	int i = 0, is_bt_on;
 	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
@@ -514,7 +514,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 	return 0;
 }
 
-static int mioa701_sys_resume(struct sys_device *sysdev)
+static void mioa701_sys_resume(void)
 {
 	int i = 0;
 	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
@@ -527,43 +527,18 @@ static int mioa701_sys_resume(struct sys_device *sysdev)
 	*mem_resume_enabler = save_buffer[i++];
 	*mem_resume_bt	    = save_buffer[i++];
 	*mem_resume_unknown = save_buffer[i++];
-
-	return 0;
 }
 
-static struct sysdev_class mioa701_sysclass = {
-	.name = "mioa701",
-};
-
-static struct sys_device sysdev_bootstrap = {
-	.cls		= &mioa701_sysclass,
-};
-
-static struct sysdev_driver driver_bootstrap = {
-	.suspend	= &mioa701_sys_suspend,
-	.resume		= &mioa701_sys_resume,
+static struct syscore_ops mioa701_syscore_ops = {
+	.suspend	= mioa701_sys_suspend,
+	.resume		= mioa701_sys_resume,
 };
 
 static int __init bootstrap_init(void)
 {
-	int rc;
 	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
 
-	rc = sysdev_class_register(&mioa701_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering mioa701 sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&sysdev_bootstrap);
-	if (rc) {
-		printk(KERN_ERR "Failed registering mioa701 sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
-	if (rc) {
-		printk(KERN_ERR "Failed registering PMU sys driver\n");
-		return -ENODEV;
-	}
+	register_syscore_ops(&mioa701_syscore_ops);
 
 	save_buffer = kmalloc(save_size, GFP_KERNEL);
 	if (!save_buffer)
@@ -576,9 +551,7 @@ static int __init bootstrap_init(void)
 static void bootstrap_exit(void)
 {
 	kfree(save_buffer);
-	sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
-	sysdev_unregister(&sysdev_bootstrap);
-	sysdev_class_unregister(&mioa701_sysclass);
+	unregister_syscore_ops(&mioa701_syscore_ops);
 
 	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
 	       "resume !!!\n");
@@ -795,7 +768,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_stuart_info(NULL);
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
-	set_pxa_fb_info(&mioa701_pxafb_info);
+	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	pxa_set_udc_info(&mioa701_udc_info);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 72adb3ae2b4..325c245c0a0 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -1,8 +1,7 @@
 /*
  * Common code for Palm LD, T5, TX, Z72
  *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -158,7 +157,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
 	}
 
-	set_pxa_fb_info(&palm27x_lcd_screen);
+	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index a6f898cbfac..4061ecddee7 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -24,7 +24,6 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
-#include <linux/sysdev.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index a09a2374697..fb06bd04727 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = {
 
 static void __init palmtc_lcd_init(void)
 {
-	set_pxa_fb_info(&palmtc_lcd_screen);
+	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
 }
 #else
 static inline void palmtc_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3f25014a136..726f5b98dcd 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = {
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+static struct gpio palmte_bl_gpios[] = {
+	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
+	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
+};
+
 static int palmte2_backlight_init(struct device *dev)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-err:
-	return ret;
+	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
 }
 
 static int palmte2_backlight_notify(struct device *dev, int brightness)
@@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness)
 
 static void palmte2_backlight_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-	gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
 }
 
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
@@ -363,7 +346,7 @@ static void __init palmte2_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	set_pxa_fb_info(&palmte2_lcd_screen);
+	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
 	pxa_set_ac97_info(&palmte2_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 8aadad55fbe..20d1b18b173 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -25,7 +25,6 @@
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/power_supply.h>
-#include <linux/sysdev.h>
 #include <linux/w1-gpio.h>
 
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3010193b081..65f24f0b77e 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -19,7 +19,7 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
@@ -30,6 +30,7 @@
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -47,6 +48,9 @@
 #include <mach/palm27x.h>
 
 #include <mach/pm.h>
+#include <mach/camera.h>
+
+#include <media/soc_camera.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -103,6 +107,28 @@ static unsigned long palmz72_pin_config[] __initdata = {
 	GPIO22_GPIO,	/* LCD border color */
 	GPIO96_GPIO,	/* lcd power */
 
+	/* PXA Camera */
+	GPIO81_CIF_DD_0,
+	GPIO48_CIF_DD_5,
+	GPIO50_CIF_DD_3,
+	GPIO51_CIF_DD_2,
+	GPIO52_CIF_DD_4,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO55_CIF_DD_1,
+	GPIO84_CIF_FV,
+	GPIO85_CIF_LV,
+	GPIO93_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+
+	GPIO56_GPIO,	/* OV9640 Powerdown */
+	GPIO57_GPIO,	/* OV9640 Reset */
+	GPIO91_GPIO,	/* OV9640 Power */
+
+	/* I2C */
+	GPIO117_GPIO,	/* I2C_SCL */
+	GPIO118_GPIO,	/* I2C_SDA */
+
 	/* Misc. */
 	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
 	GPIO88_GPIO,				/* green led */
@@ -207,9 +233,9 @@ static struct palmz72_resume_info palmz72_resume_info = {
 
 static unsigned long store_ptr;
 
-/* sys_device for Palm Zire 72 PM */
+/* syscore_ops for Palm Zire 72 PM */
 
-static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
+static int palmz72_pm_suspend(void)
 {
 	/* setup the resume_info struct for the original bootloader */
 	palmz72_resume_info.resume_addr = (u32) cpu_resume;
@@ -223,37 +249,129 @@ static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
 	return 0;
 }
 
-static int palmz72_pm_resume(struct sys_device *dev)
+static void palmz72_pm_resume(void)
 {
 	*PALMZ72_SAVE_DWORD = store_ptr;
-	return 0;
 }
 
-static struct sysdev_class palmz72_pm_sysclass = {
-	.name = "palmz72_pm",
+static struct syscore_ops palmz72_pm_syscore_ops = {
 	.suspend = palmz72_pm_suspend,
 	.resume = palmz72_pm_resume,
 };
 
-static struct sys_device palmz72_pm_device = {
-	.cls = &palmz72_pm_sysclass,
-};
-
 static int __init palmz72_pm_init(void)
 {
-	int ret = -ENODEV;
 	if (machine_is_palmz72()) {
-		ret = sysdev_class_register(&palmz72_pm_sysclass);
-		if (ret == 0)
-			ret = sysdev_register(&palmz72_pm_device);
+		register_syscore_ops(&palmz72_pm_syscore_ops);
+		return 0;
 	}
-	return ret;
+	return -ENODEV;
 }
 
 device_initcall(palmz72_pm_init);
 #endif
 
 /******************************************************************************
+ * SoC Camera
+ ******************************************************************************/
+#if defined(CONFIG_SOC_CAMERA_OV9640) || \
+	defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
+static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
+	.flags		= PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+			PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz	= 2600,
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info palmz72_i2c_device[] = {
+	{
+		I2C_BOARD_INFO("ov9640", 0x30),
+	}
+};
+
+static int palmz72_camera_power(struct device *dev, int power)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
+	mdelay(50);
+	return 0;
+}
+
+static int palmz72_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
+	mdelay(50);
+	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
+	mdelay(50);
+	return 0;
+}
+
+static struct soc_camera_link palmz72_iclink = {
+	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
+	.board_info	= &palmz72_i2c_device[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "ov96xx",
+	.power		= &palmz72_camera_power,
+	.reset		= &palmz72_camera_reset,
+	.flags		= SOCAM_DATAWIDTH_8,
+};
+
+static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
+	.sda_pin	= 118,
+	.scl_pin	= 117,
+	.udelay		= 10,
+	.timeout	= 100,
+};
+
+static struct platform_device palmz72_i2c_bus_device = {
+	.name		= "i2c-gpio",
+	.id		= 0, /* we use this as a replacement for i2c-pxa */
+	.dev		= {
+		.platform_data	= &palmz72_i2c_bus_data,
+	}
+};
+
+static struct platform_device palmz72_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmz72_iclink,
+	},
+};
+
+/* Here we request the camera GPIOs and configure them. We power up the camera
+ * module, deassert the reset pin, but put it into powerdown (low to no power
+ * consumption) mode. This allows us to later bring the module up fast. */
+static struct gpio palmz72_camera_gpios[] = {
+	{ GPIO_NR_PALMZ72_CAM_POWER,	GPIOF_INIT_HIGH,"Camera DVDD" },
+	{ GPIO_NR_PALMZ72_CAM_RESET,	GPIOF_INIT_LOW,	"Camera RESET" },
+	{ GPIO_NR_PALMZ72_CAM_PWDN,	GPIOF_INIT_LOW,	"Camera PWDN" },
+};
+
+static inline void __init palmz72_cam_gpio_init(void)
+{
+	int ret;
+
+	ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+	if (!ret)
+		gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
+	else
+		printk(KERN_ERR "Camera GPIO init failed!\n");
+
+	return;
+}
+
+static void __init palmz72_camera_init(void)
+{
+	palmz72_cam_gpio_init();
+	pxa_set_camera_info(&palmz72_pxacamera_platform_data);
+	platform_device_register(&palmz72_i2c_bus_device);
+	platform_device_register(&palmz72_camera);
+}
+#else
+static inline void palmz72_camera_init(void) {}
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init palmz72_init(void)
@@ -276,6 +394,7 @@ static void __init palmz72_init(void)
 	palm27x_pmic_init();
 	palmz72_kpc_init();
 	palmz72_leds_init();
+	palmz72_camera_init();
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 4d012054012..6d5b7e06212 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -515,7 +515,7 @@ void __init pcm990_baseboard_init(void)
 	pcm990_init_irq();
 
 #ifndef CONFIG_PCM990_DISPLAY_NONE
-	set_pxa_fb_info(&pcm990_fbinfo);
+	pxa_set_fb_info(NULL, &pcm990_fbinfo);
 #endif
 	platform_device_register(&pcm990_backlight_device);
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 35353af345d..16d14fd79b4 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -445,8 +445,7 @@ static void __init poodle_init(void)
 	if (ret)
 		pr_warning("poodle: Unable to register LoCoMo device\n");
 
-	set_pxa_fb_parent(&poodle_locomo_device.dev);
-	set_pxa_fb_info(&poodle_fb_info);
+	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6bde5956358..fed363cec9c 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/suspend.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/irq.h>
 
 #include <asm/mach/map.h>
@@ -285,7 +285,7 @@ static inline void pxa25x_init_pm(void) {}
 
 static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
 {
-	int gpio = IRQ_TO_GPIO(d->irq);
+	int gpio = irq_to_gpio(d->irq);
 	uint32_t mask = 0;
 
 	if (gpio >= 0 && gpio < 85)
@@ -350,21 +350,9 @@ static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa_device_asoc_platform,
 };
 
-static struct sys_device pxa25x_sysdev[] = {
-	{
-		.cls	= &pxa_irq_sysclass,
-	}, {
-		.cls	= &pxa2xx_mfp_sysclass,
-	}, {
-		.cls	= &pxa_gpio_sysclass,
-	}, {
-		.cls	= &pxa2xx_clock_sysclass,
-	}
-};
-
 static int __init pxa25x_init(void)
 {
-	int i, ret = 0;
+	int ret = 0;
 
 	if (cpu_is_pxa25x()) {
 
@@ -377,11 +365,10 @@ static int __init pxa25x_init(void)
 
 		pxa25x_init_pm();
 
-		for (i = 0; i < ARRAY_SIZE(pxa25x_sysdev); i++) {
-			ret = sysdev_register(&pxa25x_sysdev[i]);
-			if (ret)
-				pr_err("failed to register sysdev[%d]\n", i);
-		}
+		register_syscore_ops(&pxa_irq_syscore_ops);
+		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+		register_syscore_ops(&pxa_gpio_syscore_ops);
+		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 1cb5d0f9723..2fecbec58d8 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -345,7 +345,7 @@ static inline void pxa27x_init_pm(void) {}
  */
 static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
 {
-	int gpio = IRQ_TO_GPIO(d->irq);
+	int gpio = irq_to_gpio(d->irq);
 	uint32_t mask;
 
 	if (gpio >= 0 && gpio < 128)
@@ -428,21 +428,9 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_pwm1,
 };
 
-static struct sys_device pxa27x_sysdev[] = {
-	{
-		.cls	= &pxa_irq_sysclass,
-	}, {
-		.cls	= &pxa2xx_mfp_sysclass,
-	}, {
-		.cls	= &pxa_gpio_sysclass,
-	}, {
-		.cls	= &pxa2xx_clock_sysclass,
-	}
-};
-
 static int __init pxa27x_init(void)
 {
-	int i, ret = 0;
+	int ret = 0;
 
 	if (cpu_is_pxa27x()) {
 
@@ -455,11 +443,10 @@ static int __init pxa27x_init(void)
 
 		pxa27x_init_pm();
 
-		for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) {
-			ret = sysdev_register(&pxa27x_sysdev[i]);
-			if (ret)
-				pr_err("failed to register sysdev[%d]\n", i);
-		}
+		register_syscore_ops(&pxa_irq_syscore_ops);
+		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+		register_syscore_ops(&pxa_gpio_syscore_ops);
+		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 8dd10739115..8521d7d6f1d 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -20,7 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach/map.h>
@@ -427,21 +427,9 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_pwm1,
 };
 
-static struct sys_device pxa3xx_sysdev[] = {
-	{
-		.cls	= &pxa_irq_sysclass,
-	}, {
-		.cls	= &pxa3xx_mfp_sysclass,
-	}, {
-		.cls	= &pxa_gpio_sysclass,
-	}, {
-		.cls	= &pxa3xx_clock_sysclass,
-	}
-};
-
 static int __init pxa3xx_init(void)
 {
-	int i, ret = 0;
+	int ret = 0;
 
 	if (cpu_is_pxa3xx()) {
 
@@ -462,11 +450,10 @@ static int __init pxa3xx_init(void)
 
 		pxa3xx_init_pm();
 
-		for (i = 0; i < ARRAY_SIZE(pxa3xx_sysdev); i++) {
-			ret = sysdev_register(&pxa3xx_sysdev[i]);
-			if (ret)
-				pr_err("failed to register sysdev[%d]\n", i);
-		}
+		register_syscore_ops(&pxa_irq_syscore_ops);
+		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
+		register_syscore_ops(&pxa_gpio_syscore_ops);
+		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 23b229bd06e..ecc82a330fa 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -18,7 +18,7 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -260,16 +260,6 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_pwm1,
 };
 
-static struct sys_device pxa95x_sysdev[] = {
-	{
-		.cls	= &pxa_irq_sysclass,
-	}, {
-		.cls	= &pxa_gpio_sysclass,
-	}, {
-		.cls	= &pxa3xx_clock_sysclass,
-	}
-};
-
 static int __init pxa95x_init(void)
 {
 	int ret = 0, i;
@@ -293,11 +283,9 @@ static int __init pxa95x_init(void)
 		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
 
-		for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
-			ret = sysdev_register(&pxa95x_sysdev[i]);
-			if (ret)
-				pr_err("failed to register sysdev[%d]\n", i);
-		}
+		register_syscore_ops(&pxa_irq_syscore_ops);
+		register_syscore_ops(&pxa_gpio_syscore_ops);
+		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 47094188e02..d130f77b6d1 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -18,7 +18,6 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
@@ -597,7 +596,7 @@ static void __init raumfeld_lcd_init(void)
 {
 	int ret;
 
-	set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
 
 	/* Earlier devices had the backlight regulator controlled
 	 * via PWM, later versions use another controller for that */
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index eb83c89428e..fee97a93512 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -473,7 +473,7 @@ static struct pxafb_mach_info saar_lcd_info = {
 
 static void __init saar_init_lcd(void)
 {
-	set_pxa_fb_info(&saar_lcd_info);
+	pxa_set_fb_info(NULL, &saar_lcd_info);
 }
 #else
 static inline void saar_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index 232b7316ec0..79923058d10 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
 #include <mach/smemc.h>
@@ -16,7 +16,7 @@ static unsigned long msc[2];
 static unsigned long sxcnfg, memclkcfg;
 static unsigned long csadrcfg[4];
 
-static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa3xx_smemc_suspend(void)
 {
 	msc[0] = __raw_readl(MSC0);
 	msc[1] = __raw_readl(MSC1);
@@ -30,7 +30,7 @@ static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int pxa3xx_smemc_resume(struct sys_device *dev)
+static void pxa3xx_smemc_resume(void)
 {
 	__raw_writel(msc[0], MSC0);
 	__raw_writel(msc[1], MSC1);
@@ -40,34 +40,19 @@ static int pxa3xx_smemc_resume(struct sys_device *dev)
 	__raw_writel(csadrcfg[1], CSADRCFG1);
 	__raw_writel(csadrcfg[2], CSADRCFG2);
 	__raw_writel(csadrcfg[3], CSADRCFG3);
-
-	return 0;
 }
 
-static struct sysdev_class smemc_sysclass = {
-	.name		= "smemc",
+static struct syscore_ops smemc_syscore_ops = {
 	.suspend	= pxa3xx_smemc_suspend,
 	.resume		= pxa3xx_smemc_resume,
 };
 
-static struct sys_device smemc_sysdev = {
-	.id		= 0,
-	.cls		= &smemc_sysclass,
-};
-
 static int __init smemc_init(void)
 {
-	int ret = 0;
+	if (cpu_is_pxa3xx())
+		register_syscore_ops(&smemc_syscore_ops);
 
-	if (cpu_is_pxa3xx()) {
-		ret = sysdev_class_register(&smemc_sysclass);
-		if (ret)
-			return ret;
-
-		ret = sysdev_register(&smemc_sysdev);
-	}
-
-	return ret;
+	return 0;
 }
 subsys_initcall(smemc_init);
 #endif
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 38e2c0912b9..01c576963e9 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -724,7 +724,7 @@ static struct pxafb_mach_info spitz_pxafb_info = {
 
 static void __init spitz_lcd_init(void)
 {
-	set_pxa_fb_info(&spitz_pxafb_info);
+	pxa_set_fb_info(NULL, &spitz_pxafb_info);
 }
 #else
 static inline void spitz_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 9cecf8366db..53d4a472b69 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -466,7 +466,7 @@ static void __init tavorevb_init_lcd(void)
 {
 	platform_device_register(&tavorevb_backlight_devices[0]);
 	platform_device_register(&tavorevb_backlight_devices[1]);
-	set_pxa_fb_info(&tavorevb_lcd_info);
+	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
 }
 #else
 static inline void tavorevb_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index e7f64d9b4f2..428da3ff33a 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -100,7 +100,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 static struct clock_event_device ckevt_pxa_osmr0 = {
 	.name		= "osmr0",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 200,
 	.set_next_event	= pxa_osmr0_set_next_event,
 	.set_mode	= pxa_osmr0_set_mode,
@@ -135,8 +134,8 @@ static void __init pxa_timer_init(void)
 
 	init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
 
-	ckevt_pxa_osmr0.mult =
-		div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+	clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4);
+	clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
 	ckevt_pxa_osmr0.max_delta_ns =
 		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
 	ckevt_pxa_osmr0.min_delta_ns =
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 5ad3807af33..5fa145778e7 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -35,6 +35,7 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -240,12 +241,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = {
 /*
  * USB Device Controller
  */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
+static struct gpio_vbus_mach_info tosa_udc_info = {
 	.gpio_pullup		= TOSA_GPIO_USB_PULLUP,
 	.gpio_vbus		= TOSA_GPIO_USB_IN,
 	.gpio_vbus_inverted	= 1,
 };
 
+static struct platform_device tosa_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_udc_info,
+	},
+};
+
 /*
  * MMC/SD Device
  */
@@ -891,6 +900,7 @@ static struct platform_device *devices[] __initdata = {
 	&tosa_bt_device,
 	&sharpsl_rom_device,
 	&wm9712_device,
+	&tosa_gpio_vbus,
 };
 
 static void tosa_poweroff(void)
@@ -937,7 +947,6 @@ static void __init tosa_init(void)
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
 	pxa_set_mci_info(&tosa_mci_platform_data);
-	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 857bb2e6348..687417a9369 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
@@ -516,9 +515,9 @@ static void __init trizeps4_init(void)
 	pxa_set_stuart_info(NULL);
 
 	if (0)	/* dont know how to determine LCD */
-		set_pxa_fb_info(&sharp_lcd);
+		pxa_set_fb_info(NULL, &sharp_lcd);
 	else
-		set_pxa_fb_info(&toshiba_lcd);
+		pxa_set_fb_info(NULL, &toshiba_lcd);
 
 	pxa_set_mci_info(&trizeps4_mci_platform_data);
 #ifndef STATUS_LEDS_ON_STUART_PINS
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index aa70331c080..903218eab56 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -44,6 +44,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
@@ -130,20 +131,19 @@ static u8 viper_hw_version(void)
 	return v1;
 }
 
-/* CPU sysdev */
-static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
+/* CPU system core operations. */
+static int viper_cpu_suspend(void)
 {
 	viper_icr_set_bit(VIPER_ICR_R_DIS);
 	return 0;
 }
 
-static int viper_cpu_resume(struct sys_device *sysdev)
+static void viper_cpu_resume(void)
 {
 	viper_icr_clear_bit(VIPER_ICR_R_DIS);
-	return 0;
 }
 
-static struct sysdev_driver viper_cpu_sysdev_driver = {
+static struct syscore_ops viper_cpu_syscore_ops = {
 	.suspend	= viper_cpu_suspend,
 	.resume		= viper_cpu_resume,
 };
@@ -932,7 +932,7 @@ static void __init viper_init(void)
 	/* Wake-up serial console */
 	viper_init_serial_gpio();
 
-	set_pxa_fb_info(&fb_info);
+	pxa_set_fb_info(NULL, &fb_info);
 
 	/* v1 hardware cannot use the datacs line */
 	version = viper_hw_version();
@@ -945,7 +945,7 @@ static void __init viper_init(void)
 	viper_init_vcore_gpios();
 	viper_init_cpufreq();
 
-	sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
+	register_syscore_ops(&viper_cpu_syscore_ops);
 
 	if (version) {
 		pr_info("viper: hardware v%di%d detected. "
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index e709fd45926..67bd41488bf 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -16,7 +16,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
-#include <linux/sysdev.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -572,7 +571,7 @@ static void __init vpac270_lcd_init(void)
 	}
 
 	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
-	set_pxa_fb_info(&vpac270_lcd_screen);
+	pxa_set_fb_info(NULL, &vpac270_lcd_screen);
 	return;
 
 err2:
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index aaf883754ef..fbe9e02e2f9 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -91,13 +91,13 @@ static unsigned long z2_pin_config[] = {
 	GPIO47_STUART_TXD,
 
 	/* Keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO38_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO16_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO17_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO34_KP_MKIN_3,
+	GPIO38_KP_MKIN_4,
+	GPIO16_KP_MKIN_5,
+	GPIO17_KP_MKIN_6,
 	GPIO103_KP_MKOUT_0,
 	GPIO104_KP_MKOUT_1,
 	GPIO105_KP_MKOUT_2,
@@ -138,8 +138,7 @@ static unsigned long z2_pin_config[] = {
 	GPIO1_GPIO,		/* Power button */
 	GPIO37_GPIO,		/* Headphone detect */
 	GPIO98_GPIO,		/* Lid switch */
-	GPIO14_GPIO,		/* WiFi Reset */
-	GPIO15_GPIO,		/* WiFi Power */
+	GPIO14_GPIO,		/* WiFi Power */
 	GPIO24_GPIO,		/* WiFi CS */
 	GPIO36_GPIO,		/* WiFi IRQ */
 	GPIO88_GPIO,		/* LCD CS */
@@ -204,7 +203,7 @@ static struct platform_pwm_backlight_data z2_backlight_data[] = {
 		/* Keypad Backlight */
 		.pwm_id		= 1,
 		.max_brightness	= 1023,
-		.dft_brightness	= 512,
+		.dft_brightness	= 0,
 		.pwm_period_ns	= 1260320,
 	},
 	[1] = {
@@ -271,7 +270,7 @@ static struct pxafb_mach_info z2_lcd_screen = {
 
 static void __init z2_lcd_init(void)
 {
-	set_pxa_fb_info(&z2_lcd_screen);
+	pxa_set_fb_info(NULL, &z2_lcd_screen);
 }
 #else
 static inline void z2_lcd_init(void) {}
@@ -309,12 +308,12 @@ struct gpio_led z2_gpio_leds[] = {
 	.active_low		= 1,
 }, {
 	.name			= "z2:green:charged",
-	.default_trigger	= "none",
+	.default_trigger	= "mmc0",
 	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
 	.active_low		= 1,
 }, {
 	.name			= "z2:amber:charging",
-	.default_trigger	= "none",
+	.default_trigger	= "Z2-charging-or-full",
 	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
 	.active_low		= 1,
 },
@@ -427,8 +426,22 @@ static inline void z2_mkp_init(void) {}
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button z2_pxa_buttons[] = {
-	{KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" },
-	{KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" },
+	{
+		.code		= KEY_POWER,
+		.gpio		= GPIO1_ZIPITZ2_POWER_BUTTON,
+		.active_low	= 0,
+		.desc		= "Power Button",
+		.wakeup		= 1,
+		.type		= EV_KEY,
+	},
+	{
+		.code		= SW_LID,
+		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
+		.active_low	= 1,
+		.desc		= "Lid Switch",
+		.wakeup		= 0,
+		.type		= EV_SW,
+	},
 };
 
 static struct gpio_keys_platform_data z2_pxa_keys_data = {
@@ -461,9 +474,9 @@ static struct z2_battery_info batt_chip_info = {
 	.batt_I2C_addr	= 0x55,
 	.batt_I2C_reg	= 2,
 	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
-	.min_voltage	= 2400000,
-	.max_voltage	= 3700000,
-	.batt_div	= 69,
+	.min_voltage	= 3475000,
+	.max_voltage	= 4190000,
+	.batt_div	= 59,
 	.batt_mult	= 1000000,
 	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
 	.batt_name	= "Z2",
@@ -497,26 +510,16 @@ static int z2_lbs_spi_setup(struct spi_device *spi)
 {
 	int ret = 0;
 
-	ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power");
+	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
 	if (ret)
 		goto err;
 
-	ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1);
+	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
 	if (ret)
 		goto err2;
 
-	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset");
-	if (ret)
-		goto err2;
-
-	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0);
-	if (ret)
-		goto err3;
-
-	/* Reset the card */
+	/* Wait until card is powered on */
 	mdelay(180);
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1);
-	mdelay(20);
 
 	spi->bits_per_word = 16;
 	spi->mode = SPI_MODE_2,
@@ -525,22 +528,18 @@ static int z2_lbs_spi_setup(struct spi_device *spi)
 
 	return 0;
 
-err3:
-	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
 err2:
-	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
 err:
 	return ret;
 };
 
 static int z2_lbs_spi_teardown(struct spi_device *spi)
 {
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0);
-	gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0);
-	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
-	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
-	return 0;
+	gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
+	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
 
+	return 0;
 };
 
 static struct pxa2xx_spi_chip z2_lbs_chip_info = {
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 139aa7f2ed9..00363c7ac18 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -847,7 +847,7 @@ static void __init zeus_init(void)
 	if (zeus_setup_fb_gpios())
 		pr_err("Failed to setup fb gpios\n");
 	else
-		set_pxa_fb_info(&zeus_fb_info);
+		pxa_set_fb_info(NULL, &zeus_fb_info);
 
 	pxa_set_mci_info(&zeus_mci_platform_data);
 	pxa_set_udc_info(&zeus_udc_info);
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index a4c784aab76..5821185f77a 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -208,7 +208,7 @@ static void __init zylonite_init_lcd(void)
 	platform_device_register(&zylonite_backlight_device);
 
 	if (lcd_id & 0x20) {
-		set_pxa_fb_info(&zylonite_sharp_lcd_info);
+		pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
 		return;
 	}
 
@@ -220,7 +220,7 @@ static void __init zylonite_init_lcd(void)
 	else
 		zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
 
-	set_pxa_fb_info(&zylonite_toshiba_lcd_info);
+	pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
 }
 #else
 static inline void zylonite_init_lcd(void) {}
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
index 0c5d749d7b5..9a732195aa1 100644
--- a/arch/arm/mach-realview/include/mach/barriers.h
+++ b/arch/arm/mach-realview/include/mach/barriers.h
@@ -4,5 +4,5 @@
  * operation to deadlock the system.
  */
 #define mb()		dsb()
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		mb()
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 2ecc1d94284..10e75faba4c 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -348,7 +348,7 @@ static void __init gic_init_irq(void)
 
 #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
 		/* board GIC, secondary */
-		gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE),
+		gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
 			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
 		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
 #endif
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index cf68136cc66..b2b2a5bb275 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -19,7 +19,7 @@
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
 /* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependant on the device)
+ * number of DMA channels, and not of all of them (dependent on the device)
  * can be attached to any DMA source. We therefore let the DMA core handle
  * the allocation of hardware channels to clients.
 */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 7f7c5294796..988a6863e54 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -101,7 +101,7 @@
 #define S3C2410_BANKCON_PMC16		(0x03)
 
 /* bank configurations for banks 0..7, note banks
- * 6 and 7 have differnt configurations depending on
+ * 6 and 7 have different configurations depending on
  * the memory type bits */
 
 #define S3C2410_BANKCON_Tacp2		(0x0 << 2)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 5e2f3533205..2854129f8cc 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -23,38 +23,12 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
-static int s3c2410_irq_add(struct sys_device *sysdev)
-{
-	return 0;
-}
-
-static struct sysdev_driver s3c2410_irq_driver = {
-	.add		= s3c2410_irq_add,
+struct syscore_ops s3c24xx_irq_syscore_ops = {
 	.suspend	= s3c24xx_irq_suspend,
 	.resume		= s3c24xx_irq_resume,
 };
-
-static int __init s3c2410_irq_init(void)
-{
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
-}
-
-arch_initcall(s3c2410_irq_init);
-
-static struct sysdev_driver s3c2410a_irq_driver = {
-	.add		= s3c2410_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
-
-static int __init s3c2410a_irq_init(void)
-{
-	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
-}
-
-arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 2970ea9f7c2..1e2d536adda 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -17,7 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
@@ -214,17 +214,16 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 /* NAND Flash on BAST board */
 
 #ifdef CONFIG_PM
-static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int bast_pm_suspend(void)
 {
 	/* ensure that an nRESET is not generated on resume. */
 	gpio_direction_output(S3C2410_GPA(21), 1);
 	return 0;
 }
 
-static int bast_pm_resume(struct sys_device *sd)
+static void bast_pm_resume(void)
 {
 	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-	return 0;
 }
 
 #else
@@ -232,16 +231,11 @@ static int bast_pm_resume(struct sys_device *sd)
 #define bast_pm_resume NULL
 #endif
 
-static struct sysdev_class bast_pm_sysclass = {
-	.name		= "mach-bast",
+static struct syscore_ops bast_pm_syscore_ops = {
 	.suspend	= bast_pm_suspend,
 	.resume		= bast_pm_resume,
 };
 
-static struct sys_device bast_pm_sysdev = {
-	.cls		= &bast_pm_sysclass,
-};
-
 static int smartmedia_map[] = { 0 };
 static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
@@ -642,8 +636,7 @@ static void __init bast_map_io(void)
 
 static void __init bast_init(void)
 {
-	sysdev_class_register(&bast_pm_sysclass);
-	sysdev_register(&bast_pm_sysdev);
+	register_syscore_ops(&bast_pm_syscore_ops);
 
 	s3c_i2c0_set_platdata(&bast_i2c_info);
 	s3c_nand_set_platdata(&bast_nand_info);
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 66f44440d5d..079dcaa602d 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -252,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.def_trigger	= "",
 };
 
-/* This is the blue LED on the device. Originaly used to indicate GPS activity
+/* This is the blue LED on the device. Originally used to indicate GPS activity
  * by flashing. */
 static struct s3c24xx_led_platdata n35_blue_led_pdata = {
 	.name		= "blue_led",
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 725636fc4dc..4728f9aa7df 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
 
@@ -92,7 +93,7 @@ static void s3c2410_pm_prepare(void)
 	}
 }
 
-static int s3c2410_pm_resume(struct sys_device *dev)
+static void s3c2410_pm_resume(void)
 {
 	unsigned long tmp;
 
@@ -104,10 +105,12 @@ static int s3c2410_pm_resume(struct sys_device *dev)
 
 	if ( machine_is_aml_m5900() )
 		s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-
-	return 0;
 }
 
+struct syscore_ops s3c2410_pm_syscore_ops = {
+	.resume		= s3c2410_pm_resume,
+};
+
 static int s3c2410_pm_add(struct sys_device *dev)
 {
 	pm_cpu_prep = s3c2410_pm_prepare;
@@ -119,7 +122,6 @@ static int s3c2410_pm_add(struct sys_device *dev)
 #if defined(CONFIG_CPU_S3C2410)
 static struct sysdev_driver s3c2410_pm_driver = {
 	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
 };
 
 /* register ourselves */
@@ -133,7 +135,6 @@ arch_initcall(s3c2410_pm_drvinit);
 
 static struct sysdev_driver s3c2410a_pm_driver = {
 	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
 };
 
 static int __init s3c2410a_pm_drvinit(void)
@@ -147,7 +148,6 @@ arch_initcall(s3c2410a_pm_drvinit);
 #if defined(CONFIG_CPU_S3C2440)
 static struct sysdev_driver s3c2440_pm_driver = {
 	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
 };
 
 static int __init s3c2440_pm_drvinit(void)
@@ -161,7 +161,6 @@ arch_initcall(s3c2440_pm_drvinit);
 #if defined(CONFIG_CPU_S3C2442)
 static struct sysdev_driver s3c2442_pm_driver = {
 	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
 };
 
 static int __init s3c2442_pm_drvinit(void)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index adc90a3c589..f1d3bd8f6f1 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -40,6 +41,7 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/pll.h>
+#include <plat/pm.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -168,6 +170,9 @@ int __init s3c2410_init(void)
 {
 	printk("S3C2410: Initialising architecture\n");
 
+	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
 	return sysdev_register(&s3c2410_sysdev);
 }
 
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index f3355d2ec63..1a1aa220972 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -202,8 +202,6 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
 
 static struct sysdev_driver s3c2412_irq_driver = {
 	.add		= s3c2412_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
 };
 
 static int s3c2412_irq_init(void)
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 923e01bdf01..85dcaeb9e62 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -17,7 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
@@ -486,7 +486,7 @@ static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
 /* Jive power management device */
 
 #ifdef CONFIG_PM
-static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int jive_pm_suspend(void)
 {
 	/* Write the magic value u-boot uses to check for resume into
 	 * the INFORM0 register, and ensure INFORM1 is set to the
@@ -498,10 +498,9 @@ static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
 	return 0;
 }
 
-static int jive_pm_resume(struct sys_device *sd)
+static void jive_pm_resume(void)
 {
 	__raw_writel(0x0, S3C2412_INFORM0);
-	return 0;
 }
 
 #else
@@ -509,16 +508,11 @@ static int jive_pm_resume(struct sys_device *sd)
 #define jive_pm_resume NULL
 #endif
 
-static struct sysdev_class jive_pm_sysclass = {
-	.name		= "jive-pm",
+static struct syscore_ops jive_pm_syscore_ops = {
 	.suspend	= jive_pm_suspend,
 	.resume		= jive_pm_resume,
 };
 
-static struct sys_device jive_pm_sysdev = {
-	.cls		= &jive_pm_sysclass,
-};
-
 static void __init jive_map_io(void)
 {
 	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
@@ -536,10 +530,9 @@ static void jive_power_off(void)
 
 static void __init jive_machine_init(void)
 {
-	/* register system devices for managing low level suspend */
+	/* register system core operations for managing low level suspend */
 
-	sysdev_class_register(&jive_pm_sysclass);
-	sysdev_register(&jive_pm_sysdev);
+	register_syscore_ops(&jive_pm_syscore_ops);
 
 	/* write our sleep configurations for the IO. Pull down all unused
 	 * IO, ensure that we have turned off all peripherals we do not
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index a7417c479ff..752b13a7b3d 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -17,6 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
@@ -86,13 +87,24 @@ static struct sleep_save s3c2412_sleep[] = {
 	SAVE_ITEM(S3C2413_GPJSLPCON),
 };
 
-static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
+static struct sysdev_driver s3c2412_pm_driver = {
+	.add		= s3c2412_pm_add,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+}
+
+arch_initcall(s3c2412_pm_init);
+
+static int s3c2412_pm_suspend(void)
 {
 	s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
 	return 0;
 }
 
-static int s3c2412_pm_resume(struct sys_device *dev)
+static void s3c2412_pm_resume(void)
 {
 	unsigned long tmp;
 
@@ -102,18 +114,9 @@ static int s3c2412_pm_resume(struct sys_device *dev)
 	__raw_writel(tmp, S3C2412_PWRCFG);
 
 	s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-	return 0;
 }
 
-static struct sysdev_driver s3c2412_pm_driver = {
-	.add		= s3c2412_pm_add,
+struct syscore_ops s3c2412_pm_syscore_ops = {
 	.suspend	= s3c2412_pm_suspend,
 	.resume		= s3c2412_pm_resume,
 };
-
-static __init int s3c2412_pm_init(void)
-{
-	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
-}
-
-arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 4c6df51ddf3..ef0958d3e5c 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -244,5 +245,8 @@ int __init s3c2412_init(void)
 {
 	printk("S3C2412: Initialising architecture\n");
 
+	register_syscore_ops(&s3c2412_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
 	return sysdev_register(&s3c2412_sysdev);
 }
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 77b38f2381c..28ad20d4244 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -236,8 +236,6 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev)
 
 static struct sysdev_driver s3c2416_irq_driver = {
 	.add		= s3c2416_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
 };
 
 static int __init s3c2416_irq_init(void)
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 4a04205b04d..41db2b21e21 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -11,6 +11,7 @@
 */
 
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
@@ -55,30 +56,26 @@ static int s3c2416_pm_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state)
+static struct sysdev_driver s3c2416_pm_driver = {
+	.add		= s3c2416_pm_add,
+};
+
+static __init int s3c2416_pm_init(void)
 {
-	return 0;
+	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
 }
 
-static int s3c2416_pm_resume(struct sys_device *dev)
+arch_initcall(s3c2416_pm_init);
+
+
+static void s3c2416_pm_resume(void)
 {
 	/* unset the return-from-sleep amd inform flags */
 	__raw_writel(0x0, S3C2443_PWRMODE);
 	__raw_writel(0x0, S3C2412_INFORM0);
 	__raw_writel(0x0, S3C2412_INFORM1);
-
-	return 0;
 }
 
-static struct sysdev_driver s3c2416_pm_driver = {
-	.add		= s3c2416_pm_add,
-	.suspend	= s3c2416_pm_suspend,
+struct syscore_ops s3c2416_pm_syscore_ops = {
 	.resume		= s3c2416_pm_resume,
 };
-
-static __init int s3c2416_pm_init(void)
-{
-	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
-}
-
-arch_initcall(s3c2416_pm_init);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index ba7fd873743..494ce913dc9 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -54,6 +55,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/sdhci.h>
+#include <plat/pm.h>
 
 #include <plat/iic-core.h>
 #include <plat/fb-core.h>
@@ -95,6 +97,9 @@ int __init s3c2416_init(void)
 
 	s3c_fb_setname("s3c2443-fb");
 
+	register_syscore_ops(&s3c2416_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
 	return sysdev_register(&s3c2416_sysdev);
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 0db2411ef4b..716662008ce 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = {
 	.num_resources	= 0,
 };
 
+static struct platform_device gta02_dfbmcs320_device = {
+	.name = "dfbmcs320",
+};
+
 static struct i2c_board_info gta02_i2c_devs[] __initdata = {
 	{
 		I2C_BOARD_INFO("pcf50633", 0x73),
@@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = {
 	&s3c_device_iis,
 	&samsung_asoc_dma,
 	&s3c_device_i2c0,
+	&gta02_dfbmcs320_device,
 	&gta02_buttons_device,
 	&s3c_device_adc,
 	&s3c_device_ts,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index dfedc9c9e00..dd3120df09f 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -155,7 +155,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 	 * the same timings, however, anything smaller than 1024x768
 	 * will only be displayed in the top left corner of a 1024x768
 	 * XGA output unless you add optional dip switches to the shield.
-	 * Therefore timings for other resolutions have been ommited here.
+	 * Therefore timings for other resolutions have been omitted here.
 	 */
 	[2] = {
 		_LCD_DECLARE(
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 14dc6789775..d8853639331 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -17,7 +17,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
 #include <linux/clk.h>
 #include <linux/i2c.h>
@@ -284,7 +284,7 @@ static struct platform_device osiris_pcmcia = {
 #ifdef CONFIG_PM
 static unsigned char pm_osiris_ctrl0;
 
-static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
+static int osiris_pm_suspend(void)
 {
 	unsigned int tmp;
 
@@ -304,7 +304,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 	return 0;
 }
 
-static int osiris_pm_resume(struct sys_device *sd)
+static void osiris_pm_resume(void)
 {
 	if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
 		__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
@@ -312,8 +312,6 @@ static int osiris_pm_resume(struct sys_device *sd)
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
 	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-
-	return 0;
 }
 
 #else
@@ -321,16 +319,11 @@ static int osiris_pm_resume(struct sys_device *sd)
 #define osiris_pm_resume NULL
 #endif
 
-static struct sysdev_class osiris_pm_sysclass = {
-	.name		= "mach-osiris",
+static struct syscore_ops osiris_pm_syscore_ops = {
 	.suspend	= osiris_pm_suspend,
 	.resume		= osiris_pm_resume,
 };
 
-static struct sys_device osiris_pm_sysdev = {
-	.cls		= &osiris_pm_sysclass,
-};
-
 /* Link for DVS driver to TPS65011 */
 
 static void osiris_tps_release(struct device *dev)
@@ -439,8 +432,7 @@ static void __init osiris_map_io(void)
 
 static void __init osiris_init(void)
 {
-	sysdev_class_register(&osiris_pm_sysclass);
-	sysdev_register(&osiris_pm_sysdev);
+	register_syscore_ops(&osiris_pm_syscore_ops);
 
 	s3c_i2c0_set_platdata(NULL);
 	s3c_nand_set_platdata(&osiris_nand_info);
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index f7663f731ea..ce99ff72838 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -33,6 +34,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
+#include <plat/pm.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -51,6 +53,12 @@ int __init s3c2440_init(void)
 	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
 	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
 
+	/* register suspend/resume handlers */
+
+	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c244x_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
 	/* register our system device for everything else */
 
 	return sysdev_register(&s3c2440_sysdev);
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index ecf81354655..6224bad4d60 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -29,6 +29,7 @@
 #include <linux/err.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/mutex.h>
@@ -45,6 +46,7 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
+#include <plat/pm.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -167,6 +169,10 @@ int __init s3c2442_init(void)
 {
 	printk("S3C2442: Initialising architecture\n");
 
+	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c244x_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+
 	return sysdev_register(&s3c2442_sysdev);
 }
 
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index de07c2feaa3..c63e8f26d90 100644
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
@@ -116,8 +116,6 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
 
 static struct sysdev_driver s3c2440_irq_driver = {
 	.add		= s3c244x_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
 };
 
 static int s3c2440_irq_init(void)
@@ -129,8 +127,6 @@ arch_initcall(s3c2440_irq_init);
 
 static struct sysdev_driver s3c2442_irq_driver = {
 	.add		= s3c244x_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
 };
 
 
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 90c1707b9c9..7e8a23d2098 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -19,6 +19,7 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -134,45 +135,14 @@ void __init s3c244x_init_clocks(int xtal)
 	s3c2410_baseclk_add();
 }
 
-#ifdef CONFIG_PM
-
-static struct sleep_save s3c244x_sleep[] = {
-	SAVE_ITEM(S3C2440_DSC0),
-	SAVE_ITEM(S3C2440_DSC1),
-	SAVE_ITEM(S3C2440_GPJDAT),
-	SAVE_ITEM(S3C2440_GPJCON),
-	SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
-{
-	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-static int s3c244x_resume(struct sys_device *dev)
-{
-	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume  NULL
-#endif
-
 /* Since the S3C2442 and S3C2440 share  items, put both sysclasses here */
 
 struct sysdev_class s3c2440_sysclass = {
 	.name		= "s3c2440-core",
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume
 };
 
 struct sysdev_class s3c2442_sysclass = {
 	.name		= "s3c2442-core",
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume
 };
 
 /* need to register class before we actually register the device, and
@@ -194,3 +164,33 @@ static int __init s3c2442_core_init(void)
 }
 
 core_initcall(s3c2442_core_init);
+
+
+#ifdef CONFIG_PM
+static struct sleep_save s3c244x_sleep[] = {
+	SAVE_ITEM(S3C2440_DSC0),
+	SAVE_ITEM(S3C2440_DSC1),
+	SAVE_ITEM(S3C2440_GPJDAT),
+	SAVE_ITEM(S3C2440_GPJCON),
+	SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(void)
+{
+	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+	return 0;
+}
+
+static void s3c244x_resume(void)
+{
+	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+}
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume  NULL
+#endif
+
+struct syscore_ops s3c244x_pm_syscore_ops = {
+	.suspend	= s3c244x_suspend,
+	.resume		= s3c244x_resume,
+};
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index c35585cf8c4..b197171e7d0 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -315,7 +315,7 @@ int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
 	case S3C2410_DMAOP_FLUSH:
 		return s3c64xx_dma_flush(chan);
 
-	/* belive PAUSE/RESUME are no-ops */
+	/* believe PAUSE/RESUME are no-ops */
 	case S3C2410_DMAOP_PAUSE:
 	case S3C2410_DMAOP_RESUME:
 	case S3C2410_DMAOP_STARTED:
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index da1bec64b9d..8bec61e242c 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/irq.h>
@@ -54,7 +54,7 @@ static struct irq_grp_save {
 
 static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
 
-static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+static int s3c64xx_irq_pm_suspend(void)
 {
 	struct irq_grp_save *grp = eint_grp_save;
 	int i;
@@ -75,7 +75,7 @@ static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+static void s3c64xx_irq_pm_resume(void)
 {
 	struct irq_grp_save *grp = eint_grp_save;
 	int i;
@@ -94,18 +94,18 @@ static int s3c64xx_irq_pm_resume(struct sys_device *dev)
 	}
 
 	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
-	return 0;
 }
 
-static struct sysdev_driver s3c64xx_irq_driver = {
+struct syscore_ops s3c64xx_irq_syscore_ops = {
 	.suspend = s3c64xx_irq_pm_suspend,
 	.resume	 = s3c64xx_irq_pm_resume,
 };
 
-static int __init s3c64xx_irq_pm_init(void)
+static __init int s3c64xx_syscore_init(void)
 {
-	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
-}
+	register_syscore_ops(&s3c64xx_irq_syscore_ops);
 
-arch_initcall(s3c64xx_irq_pm_init);
+	return 0;
+}
 
+core_initcall(s3c64xx_syscore_init);
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
index 4be4cc9abf7..07aa4d6054f 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -29,7 +29,7 @@
 #define WPALCON_H					(0x19c)
 #define WPALCON_L					(0x1a0)
 
-/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but
  * different for WPAL2-4
  */
 /* In WPALCON_L (aka WPALCON) */
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index f16946e456e..be25879bb2e 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -40,7 +40,7 @@ void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
 {
 	u32 ctrl2, ctrl3;
 
-	/* don't need to alter anything acording to card-type */
+	/* don't need to alter anything according to card-type */
 
 	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
 
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index 1f4b595534c..a5a1e331f8e 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -18,7 +18,7 @@
 #define gpio_cansleep	__gpio_cansleep
 #define gpio_to_irq	__gpio_to_irq
 
-/* Practically, GPIO banks upto MP03 are the configurable gpio banks */
+/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
 
 /* GPIO bank sizes */
 #define S5PV210_GPIO_A0_NR	(8)
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 549d7924fd4..24febae3d4c 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -16,6 +16,7 @@
 
 #include <linux/init.h>
 #include <linux/suspend.h>
+#include <linux/syscore_ops.h>
 #include <linux/io.h>
 
 #include <plat/cpu.h>
@@ -140,7 +141,17 @@ static int s5pv210_pm_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static int s5pv210_pm_resume(struct sys_device *dev)
+static struct sysdev_driver s5pv210_pm_driver = {
+	.add		= s5pv210_pm_add,
+};
+
+static __init int s5pv210_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+}
+arch_initcall(s5pv210_pm_drvinit);
+
+static void s5pv210_pm_resume(void)
 {
 	u32 tmp;
 
@@ -150,17 +161,15 @@ static int s5pv210_pm_resume(struct sys_device *dev)
 	__raw_writel(tmp , S5P_OTHERS);
 
 	s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
-
-	return 0;
 }
 
-static struct sysdev_driver s5pv210_pm_driver = {
-	.add		= s5pv210_pm_add,
+static struct syscore_ops s5pv210_pm_syscore_ops = {
 	.resume		= s5pv210_pm_resume,
 };
 
-static __init int s5pv210_pm_drvinit(void)
+static __init int s5pv210_pm_syscore_init(void)
 {
-	return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+	register_syscore_ops(&s5pv210_pm_syscore_ops);
+	return 0;
 }
-arch_initcall(s5pv210_pm_drvinit);
+arch_initcall(s5pv210_pm_syscore_init);
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index 746777d56df..3e3ac05bb7b 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -32,10 +32,10 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 
 	switch (width) {
 	case 8:
-		/* GPG1[3:6] special-funtion 3 */
+		/* GPG1[3:6] special-function 3 */
 		s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3));
 	case 4:
-		/* GPG0[3:6] special-funtion 2 */
+		/* GPG0[3:6] special-function 2 */
 		s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2));
 	default:
 		break;
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index c32e202731c..a83b6c909f6 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -38,7 +38,7 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
 {
 	u32 ctrl2, ctrl3;
 
-	/* don't need to alter anything acording to card-type */
+	/* don't need to alter anything according to card-type */
 
 	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
 
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index e697691eed2..41252d22e65 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -50,7 +50,7 @@ led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o
 # LEDs support
 obj-$(CONFIG_LEDS) += $(led-y)
 
-# Miscelaneous functions
+# Miscellaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 07d4e8ba371..aaa8acf76b7 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -68,7 +68,7 @@
  * clock change in ROM and jump to that code from the kernel. The main
  * disadvantage is that the ROM has to be modified, which is not
  * possible on all SA-1100 platforms. Another disadvantage is that
- * jumping to ROM makes clock switching unecessary complicated.
+ * jumping to ROM makes clock switching unnecessary complicated.
  *
  * The idea behind this driver is that the memory configuration can be
  * changed while running from DRAM (even with interrupts turned on!)
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 4f7ea012e1e..bae8296f5db 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -1794,7 +1794,7 @@
                 	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
                 	 DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
 
-#define DCSR_RUN	0x00000001	/* DMA RUNing                      */
+#define DCSR_RUN	0x00000001	/* DMA running                     */
 #define DCSR_IE 	0x00000002	/* DMA Interrupt Enable            */
 #define DCSR_ERROR	0x00000004	/* DMA ERROR                       */
 #define DCSR_DONEA	0x00000008	/* DONE DMA transfer buffer A      */
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 423ddb3d65e..dfbf824a69f 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/ioport.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/irq.h>
@@ -234,7 +234,7 @@ static struct sa1100irq_state {
 	unsigned int	iccr;
 } sa1100irq_state;
 
-static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state)
+static int sa1100irq_suspend(void)
 {
 	struct sa1100irq_state *st = &sa1100irq_state;
 
@@ -264,7 +264,7 @@ static int sa1100irq_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int sa1100irq_resume(struct sys_device *dev)
+static void sa1100irq_resume(void)
 {
 	struct sa1100irq_state *st = &sa1100irq_state;
 
@@ -277,24 +277,17 @@ static int sa1100irq_resume(struct sys_device *dev)
 
 		ICMR = st->icmr;
 	}
-	return 0;
 }
 
-static struct sysdev_class sa1100irq_sysclass = {
-	.name		= "sa11x0-irq",
+static struct syscore_ops sa1100irq_syscore_ops = {
 	.suspend	= sa1100irq_suspend,
 	.resume		= sa1100irq_resume,
 };
 
-static struct sys_device sa1100irq_device = {
-	.id		= 0,
-	.cls		= &sa1100irq_sysclass,
-};
-
 static int __init sa1100irq_init_devicefs(void)
 {
-	sysdev_class_register(&sa1100irq_sysclass);
-	return sysdev_register(&sa1100irq_device);
+	register_syscore_ops(&sa1100irq_syscore_ops);
+	return 0;
 }
 
 device_initcall(sa1100irq_init_devicefs);
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 9d490c66891..f50b00bd18a 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -29,7 +29,7 @@ static unsigned long jornada_ssp_flags;
 /**
  * jornada_ssp_reverse - reverses input byte
  *
- * we need to reverse all data we recieve from the mcu due to its physical location
+ * we need to reverse all data we receive from the mcu due to its physical location
  * returns : 01110111 -> 11101110
  */
 u8 inline jornada_ssp_reverse(u8 byte)
@@ -179,7 +179,7 @@ static int __devinit jornada_ssp_probe(struct platform_device *dev)
 
 static int jornada_ssp_remove(struct platform_device *dev)
 {
-	/* Note that this doesnt actually remove the driver, since theres nothing to remove
+	/* Note that this doesn't actually remove the driver, since theres nothing to remove
 	 * It just makes sure everything is turned off */
 	GPSR = GPIO_GPIO25;
 	ssp_exit();
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 783b66fa95f..1e35fa976d6 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -947,7 +947,7 @@ static struct platform_device *ap4evb_devices[] __initdata = {
 	&ap4evb_camera,
 };
 
-static int __init hdmi_init_pm_clock(void)
+static void __init hdmi_init_pm_clock(void)
 {
 	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
 	int ret;
@@ -988,20 +988,15 @@ static int __init hdmi_init_pm_clock(void)
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-	if (ret < 0) {
+	if (ret < 0)
 		pr_err("Cannot set HDMI parent: %d\n", ret);
-		goto out;
-	}
 
 out:
 	if (!IS_ERR(hdmi_ick))
 		clk_put(hdmi_ick);
-	return ret;
 }
 
-device_initcall(hdmi_init_pm_clock);
-
-static int __init fsi_init_pm_clock(void)
+static void __init fsi_init_pm_clock(void)
 {
 	struct clk *fsia_ick;
 	int ret;
@@ -1010,7 +1005,7 @@ static int __init fsi_init_pm_clock(void)
 	if (IS_ERR(fsia_ick)) {
 		ret = PTR_ERR(fsia_ick);
 		pr_err("Cannot get FSI ICK: %d\n", ret);
-		return ret;
+		return;
 	}
 
 	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
@@ -1018,10 +1013,7 @@ static int __init fsi_init_pm_clock(void)
 		pr_err("Cannot set FSI-A parent: %d\n", ret);
 
 	clk_put(fsia_ick);
-
-	return ret;
 }
-device_initcall(fsi_init_pm_clock);
 
 /*
  * FIXME !!
@@ -1348,6 +1340,9 @@ static void __init ap4evb_init(void)
 	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
 
 	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+
+	hdmi_init_pm_clock();
+	fsi_init_pm_clock();
 }
 
 static void __init ap4evb_timer_init(void)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 8184d4d4f23..7da2ca24229 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -423,7 +423,7 @@ static struct platform_device fsi_hdmi_device = {
 	.name		= "sh_fsi2_b_hdmi",
 };
 
-static int __init hdmi_init_pm_clock(void)
+static void __init hdmi_init_pm_clock(void)
 {
 	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
 	int ret;
@@ -467,17 +467,13 @@ static int __init hdmi_init_pm_clock(void)
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-	if (ret < 0) {
+	if (ret < 0)
 		pr_err("Cannot set HDMI parent: %d\n", ret);
-		goto out;
-	}
 
 out:
 	if (!IS_ERR(hdmi_ick))
 		clk_put(hdmi_ick);
-	return ret;
 }
-device_initcall(hdmi_init_pm_clock);
 
 /* USB1 (Host) */
 static void usb1_host_port_power(int port, int power)
@@ -1218,6 +1214,8 @@ static void __init mackerel_init(void)
 	sh7372_add_standard_devices();
 
 	platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
+
+	hdmi_init_pm_clock();
 }
 
 static void __init mackerel_timer_init(void)
diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h
index e11560a525a..21a59db638b 100644
--- a/arch/arm/mach-shmobile/include/mach/mmc.h
+++ b/arch/arm/mach-shmobile/include/mach/mmc.h
@@ -9,7 +9,7 @@
 
 #ifdef CONFIG_MACH_AP4EVB
 #include "mach/mmc-ap4eb.h"
-#elif CONFIG_MACH_MACKEREL
+#elif defined(CONFIG_MACH_MACKEREL)
 #include "mach/mmc-mackerel.h"
 #else
 #error "unsupported board."
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index 6d6a205bcf9..9320aff0a20 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -13,7 +13,7 @@
 #ifdef CONFIG_MACH_AP4EVB
 #define MACH_TYPE	MACH_TYPE_AP4EVB
 #include "mach/head-ap4evb.txt"
-#elif CONFIG_MACH_MACKEREL
+#elif defined(CONFIG_MACH_MACKEREL)
 #define MACH_TYPE	MACH_TYPE_MACKEREL
 #include "mach/head-mackerel.txt"
 #else
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c
index 94912d3944d..2d1b67a59e4 100644
--- a/arch/arm/mach-shmobile/pm_runtime.c
+++ b/arch/arm/mach-shmobile/pm_runtime.c
@@ -18,152 +18,41 @@
 #include <linux/clk.h>
 #include <linux/sh_clk.h>
 #include <linux/bitmap.h>
+#include <linux/slab.h>
 
 #ifdef CONFIG_PM_RUNTIME
-#define BIT_ONCE 0
-#define BIT_ACTIVE 1
-#define BIT_CLK_ENABLED 2
 
-struct pm_runtime_data {
-	unsigned long flags;
-	struct clk *clk;
-};
-
-static void __devres_release(struct device *dev, void *res)
-{
-	struct pm_runtime_data *prd = res;
-
-	dev_dbg(dev, "__devres_release()\n");
-
-	if (test_bit(BIT_CLK_ENABLED, &prd->flags))
-		clk_disable(prd->clk);
-
-	if (test_bit(BIT_ACTIVE, &prd->flags))
-		clk_put(prd->clk);
-}
-
-static struct pm_runtime_data *__to_prd(struct device *dev)
-{
-	return devres_find(dev, __devres_release, NULL, NULL);
-}
-
-static void platform_pm_runtime_init(struct device *dev,
-				     struct pm_runtime_data *prd)
-{
-	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
-		prd->clk = clk_get(dev, NULL);
-		if (!IS_ERR(prd->clk)) {
-			set_bit(BIT_ACTIVE, &prd->flags);
-			dev_info(dev, "clocks managed by runtime pm\n");
-		}
-	}
-}
-
-static void platform_pm_runtime_bug(struct device *dev,
-				    struct pm_runtime_data *prd)
-{
-	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
-		dev_err(dev, "runtime pm suspend before resume\n");
-}
-
-int platform_pm_runtime_suspend(struct device *dev)
-{
-	struct pm_runtime_data *prd = __to_prd(dev);
-
-	dev_dbg(dev, "platform_pm_runtime_suspend()\n");
-
-	platform_pm_runtime_bug(dev, prd);
-
-	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
-		clk_disable(prd->clk);
-		clear_bit(BIT_CLK_ENABLED, &prd->flags);
-	}
-
-	return 0;
-}
-
-int platform_pm_runtime_resume(struct device *dev)
-{
-	struct pm_runtime_data *prd = __to_prd(dev);
-
-	dev_dbg(dev, "platform_pm_runtime_resume()\n");
-
-	platform_pm_runtime_init(dev, prd);
-
-	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
-		clk_enable(prd->clk);
-		set_bit(BIT_CLK_ENABLED, &prd->flags);
-	}
-
-	return 0;
-}
-
-int platform_pm_runtime_idle(struct device *dev)
+static int default_platform_runtime_idle(struct device *dev)
 {
 	/* suspend synchronously to disable clocks immediately */
 	return pm_runtime_suspend(dev);
 }
 
-static int platform_bus_notify(struct notifier_block *nb,
-			       unsigned long action, void *data)
-{
-	struct device *dev = data;
-	struct pm_runtime_data *prd;
-
-	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
-
-	if (action == BUS_NOTIFY_BIND_DRIVER) {
-		prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
-		if (prd)
-			devres_add(dev, prd);
-		else
-			dev_err(dev, "unable to alloc memory for runtime pm\n");
-	}
-
-	return 0;
-}
-
-#else /* CONFIG_PM_RUNTIME */
-
-static int platform_bus_notify(struct notifier_block *nb,
-			       unsigned long action, void *data)
-{
-	struct device *dev = data;
-	struct clk *clk;
+static struct dev_power_domain default_power_domain = {
+	.ops = {
+		.runtime_suspend = pm_runtime_clk_suspend,
+		.runtime_resume = pm_runtime_clk_resume,
+		.runtime_idle = default_platform_runtime_idle,
+		USE_PLATFORM_PM_SLEEP_OPS
+	},
+};
 
-	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+#define DEFAULT_PWR_DOMAIN_PTR	(&default_power_domain)
 
-	switch (action) {
-	case BUS_NOTIFY_BIND_DRIVER:
-		clk = clk_get(dev, NULL);
-		if (!IS_ERR(clk)) {
-			clk_enable(clk);
-			clk_put(clk);
-			dev_info(dev, "runtime pm disabled, clock forced on\n");
-		}
-		break;
-	case BUS_NOTIFY_UNBOUND_DRIVER:
-		clk = clk_get(dev, NULL);
-		if (!IS_ERR(clk)) {
-			clk_disable(clk);
-			clk_put(clk);
-			dev_info(dev, "runtime pm disabled, clock forced off\n");
-		}
-		break;
-	}
+#else
 
-	return 0;
-}
+#define DEFAULT_PWR_DOMAIN_PTR	NULL
 
 #endif /* CONFIG_PM_RUNTIME */
 
-static struct notifier_block platform_bus_notifier = {
-	.notifier_call = platform_bus_notify
+static struct pm_clk_notifier_block platform_bus_notifier = {
+	.pwr_domain = DEFAULT_PWR_DOMAIN_PTR,
+	.con_ids = { NULL, },
 };
 
 static int __init sh_pm_runtime_init(void)
 {
-	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+	pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
 	return 0;
 }
 core_initcall(sh_pm_runtime_init);
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index e945ae28ee7..f4ef5eb317b 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -223,7 +223,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
 	 *  - Change the source selector to invalid to stop the DMA from
 	 *    FIFO to memory.
 	 *  - Read the status register to know the number of pending
-	 *    bytes to be transfered.
+	 *    bytes to be transferred.
 	 *  - Finally stop or program the DMA to the next buffer in the
 	 *    list.
 	 */
@@ -244,7 +244,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
 	if (status & STA_BUSY)
 		req->bytes_transferred -= to_transfer;
 
-	/* In continous transfer mode, DMA only tracks the count of the
+	/* In continuous transfer mode, DMA only tracks the count of the
 	 * half DMA buffer. So, if the DMA already finished half the DMA
 	 * then add the half buffer to the completed count.
 	 *
diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c
index 76a3f654220..65a1aba6823 100644
--- a/arch/arm/mach-tegra/gpio.c
+++ b/arch/arm/mach-tegra/gpio.c
@@ -257,7 +257,8 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 void tegra_gpio_resume(void)
 {
 	unsigned long flags;
-	int b, p, i;
+	int b;
+	int p;
 
 	local_irq_save(flags);
 
@@ -280,7 +281,8 @@ void tegra_gpio_resume(void)
 void tegra_gpio_suspend(void)
 {
 	unsigned long flags;
-	int b, p, i;
+	int b;
+	int p;
 
 	local_irq_save(flags);
 	for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h
index cc115174899..425b42e91ef 100644
--- a/arch/arm/mach-tegra/include/mach/barriers.h
+++ b/arch/arm/mach-tegra/include/mach/barriers.h
@@ -23,7 +23,7 @@
 
 #include <asm/outercache.h>
 
-#define rmb()		dmb()
+#define rmb()		dsb()
 #define wmb()		do { dsb(); outer_sync(); } while (0)
 #define mb()		wmb()
 
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index 39011bd9a92..d0132e8031a 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -92,11 +92,11 @@ struct tegra_dma_req {
 	/*  This is a called from the DMA ISR context when the DMA is still in
 	 *  progress and is actively filling same buffer.
 	 *
-	 *  In case of continous mode receive, this threshold is 1/2 the buffer
+	 *  In case of continuous mode receive, this threshold is 1/2 the buffer
 	 *  size. In other cases, this will not even be called as there is no
 	 *  hardware support for it.
 	 *
-	 * In the case of continous mode receive, if there is next req already
+	 * In the case of continuous mode receive, if there is next req already
 	 * queued, DMA programs the HW to use that req when this req is
 	 * completed. If there is no "next req" queued, then DMA ISR doesn't do
 	 * anything before calling this callback.
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 6d7c4eea4dc..4459470c052 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -1362,14 +1362,15 @@ static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate)
 {
 	unsigned long flags;
 	int ret;
+	long new_rate = rate;
 
-	rate = clk_round_rate(c->parent, rate);
-	if (rate < 0)
-		return rate;
+	new_rate = clk_round_rate(c->parent, new_rate);
+	if (new_rate < 0)
+		return new_rate;
 
 	spin_lock_irqsave(&c->parent->spinlock, flags);
 
-	c->u.shared_bus_user.rate = rate;
+	c->u.shared_bus_user.rate = new_rate;
 	ret = tegra_clk_shared_bus_update(c->parent);
 
 	spin_unlock_irqrestore(&c->parent->spinlock, flags);
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index fabcc49abe8..5535dd0a78c 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -263,7 +263,7 @@ static void disable_i2s0_vcxo(void)
 	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
 	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
 	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if noone else is using VCXO */
+	/* Deactivate VCXO if no one else is using VCXO */
 	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
 		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
 	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
@@ -283,7 +283,7 @@ static void disable_i2s1_vcxo(void)
 	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
 	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
 	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if noone else is using VCXO */
+	/* Deactivate VCXO if no one else is using VCXO */
 	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
 		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
 	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
@@ -649,7 +649,7 @@ static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
  */
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	/* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
+	/* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */
 	/* Else default to fixed value */
 
 	if (clk->round_rate) {
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index dc8746d7826..6e1907fa94f 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -52,7 +52,7 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
 	 * on value present in GpioSel1 to GpioSel6 and AlternatFunction
 	 * register. This is the array of 7 configuration settings.
 	 * One has to compile time decide these settings. Below is the
-	 * explaination of these setting
+	 * explanation of these setting
 	 * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
 	 * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
 	 * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
@@ -178,16 +178,15 @@ static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
 		.irq		= NOMADIK_GPIO_TO_IRQ(217),
 		.platform_data  = &mop500_tc35892_data,
 	},
-};
-
-/* I2C0 devices only available prior to HREFv60 */
-static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = {
+	/* I2C0 devices only available prior to HREFv60 */
 	{
 		I2C_BOARD_INFO("tps61052", 0x33),
 		.platform_data  = &mop500_tps61052_data,
 	},
 };
 
+#define NUM_PRE_V60_I2C0_DEVICES 1
+
 static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	{
 		/* lp5521 LED driver, 1st device */
@@ -425,6 +424,8 @@ static void __init mop500_uart_init(void)
 
 static void __init mop500_init_machine(void)
 {
+	int i2c0_devs;
+
 	/*
 	 * The HREFv60 board removed a GPIO expander and routed
 	 * all these GPIO pins to the internal GPIO controller
@@ -448,11 +449,11 @@ static void __init mop500_init_machine(void)
 
 	platform_device_register(&ab8500_device);
 
-	i2c_register_board_info(0, mop500_i2c0_devices,
-				ARRAY_SIZE(mop500_i2c0_devices));
-	if (!machine_is_hrefv60())
-		i2c_register_board_info(0, mop500_i2c0_old_devices,
-					ARRAY_SIZE(mop500_i2c0_old_devices));
+	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+	if (machine_is_hrefv60())
+		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 	i2c_register_board_info(2, mop500_i2c2_devices,
 				ARRAY_SIZE(mop500_i2c2_devices));
 }
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 0fefb34c11e..16647b25537 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -58,7 +58,7 @@
 #define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xE000)
 #define U8500_GPIO3_BASE	(U8500_PER5_BASE + 0x1E000)
 
-/* per7 base addressess */
+/* per7 base addresses */
 #define U8500_CR_BASE_ED	(U8500_PER7_BASE_ED + 0x8000)
 #define U8500_MTU0_BASE_ED	(U8500_PER7_BASE_ED + 0xa000)
 #define U8500_MTU1_BASE_ED	(U8500_PER7_BASE_ED + 0xb000)
@@ -68,7 +68,7 @@
 #define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
 #define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
 
-/* per6 base addressess */
+/* per6 base addresses */
 #define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
 #define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
 #define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
@@ -79,11 +79,11 @@
 #define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
 #define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
 
-/* per5 base addressess */
+/* per5 base addresses */
 #define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
 #define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
 
-/* per4 base addressess */
+/* per4 base addresses */
 #define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x00000)
 #define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x01000)
 #define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x02000)
@@ -106,7 +106,7 @@
 #define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
 #define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
 
-/* per2 base addressess */
+/* per2 base addresses */
 #define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
 #define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
 #define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 96e59e3ee4f..eb7ffa0ee8b 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -314,7 +314,7 @@ static struct mmci_platform_data mmc0_plat_data = {
 	.gpio_cd	= -1,
 };
 
-static struct resource chalcd_resources[] = {
+static struct resource char_lcd_resources[] = {
 	{
 		.start = VERSATILE_CHAR_LCD_BASE,
 		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index d3644db467b..f40c69656d8 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -32,7 +32,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  *
  *  Size  Clean (ticks) Dirty (ticks)
  *   4096   21  20  21    53  55  54
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 49c2b66cf3d..a7b276dbda1 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -34,7 +34,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  *
  * *** This needs benchmarking
  */
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 6136e68ce95..dc18d81ef8c 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -96,7 +96,7 @@ ENDPROC(v7_flush_dcache_all)
  *	Flush the entire cache system.
  *  The data cache flush is now achieved using atomic clean / invalidates
  *  working outwards from L1 cache. This is done using Set/Way based cache
- *  maintainance instructions.
+ *  maintenance instructions.
  *  The instruction cache can still be invalidated back to the point of
  *  unification in a single instruction.
  *
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index e5f6fc42834..e591513bb53 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -392,7 +392,7 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 	 * Convert start_pfn/end_pfn to a struct page pointer.
 	 */
 	start_pg = pfn_to_page(start_pfn - 1) + 1;
-	end_pg = pfn_to_page(end_pfn);
+	end_pg = pfn_to_page(end_pfn - 1) + 1;
 
 	/*
 	 * Convert to physical addresses, and
@@ -426,6 +426,14 @@ static void __init free_unused_memmap(struct meminfo *mi)
 
 		bank_start = bank_pfn_start(bank);
 
+#ifdef CONFIG_SPARSEMEM
+		/*
+		 * Take care not to free memmap entries that don't exist
+		 * due to SPARSEMEM sections which aren't present.
+		 */
+		bank_start = min(bank_start,
+				 ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
@@ -440,6 +448,12 @@ static void __init free_unused_memmap(struct meminfo *mi)
 		 */
 		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
 	}
+
+#ifdef CONFIG_SPARSEMEM
+	if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
+		free_memmap(prev_bank_end,
+			    ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#endif
 }
 
 static void __init free_highpages(void)
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index afe209e1e1f..74be05f3e03 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -7,6 +7,7 @@
 #include <linux/shm.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/personality.h>
 #include <linux/random.h>
 #include <asm/cputype.h>
 #include <asm/system.h>
@@ -82,7 +83,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	        mm->cached_hole_size = 0;
 	}
 	/* 8 bits of randomness in 20 address space bits */
-	if (current->flags & PF_RANDOMIZE)
+	if ((current->flags & PF_RANDOMIZE) &&
+	    !(current->personality & ADDR_NO_RANDOMIZE))
 		addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
 
 full_search:
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 226e3d8351c..6c4e7fd6c8a 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -64,7 +64,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT	32768
 
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 86d9c2cf0bc..4ce947c1962 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -64,7 +64,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT	32768
 
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 83d3dd34f84..c8884c5413a 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -53,7 +53,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT	32768
 
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 686043ee728..413684660aa 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -53,7 +53,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT	32768
 
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 665266da143..7a06e5964f5 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -63,7 +63,7 @@ ENTRY(cpu_arm720_proc_fin)
 /*
  * Function: arm720_proc_do_idle(void)
  * Params  : r0 = unused
- * Purpose : put the processer in proper idle mode
+ * Purpose : put the processor in proper idle mode
  */
 ENTRY(cpu_arm720_do_idle)
 		mov	pc, lr
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 219980ec8b6..bf8a1d1cccb 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -53,7 +53,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT	65536
 
@@ -390,7 +390,7 @@ ENTRY(cpu_arm920_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm920_suspend_size
 .equ	cpu_arm920_suspend_size, 4 * 3
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm920_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ PID
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 36154b1e792..95ba1fc56e4 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -54,7 +54,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.  (I think this should
+ * cache line maintenance instructions.  (I think this should
  * be 32768).
  */
 #define CACHE_DLIMIT	8192
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 89c5e0009c4..541e4774eea 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -77,7 +77,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT	8192
 
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 6a4bdb2c94a..0ed85d930c0 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -404,7 +404,7 @@ ENTRY(cpu_arm926_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm926_suspend_size
 .equ	cpu_arm926_suspend_size, 4 * 3
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm926_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ PID
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index e32fa499194..34261f9486b 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -85,7 +85,7 @@
 
 /*
  * Sanity check the PTE configuration for the code below - which makes
- * certain assumptions about how these bits are layed out.
+ * certain assumptions about how these bits are laid out.
  */
 #ifdef CONFIG_MMU
 #if L_PTE_SHARED != PTE_EXT_SHARED
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 74483d1977f..184a9c997e3 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -171,7 +171,7 @@ ENTRY(cpu_sa1100_set_pte_ext)
 
 .globl	cpu_sa1100_suspend_size
 .equ	cpu_sa1100_suspend_size, 4*4
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_sa1100_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}
 	mrc	p15, 0, r4, c3, c0, 0		@ domain ID
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 832b6bdc192..7c99cb4c8e4 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -124,7 +124,7 @@ ENTRY(cpu_v6_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
 .globl	cpu_v6_suspend_size
 .equ	cpu_v6_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v6_do_suspend)
 	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
@@ -132,7 +132,7 @@ ENTRY(cpu_v6_do_suspend)
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ Translation table base 0
 	mrc	p15, 0, r8, c2, c0, 1	@ Translation table base 1
-	mrc	p15, 0, r9, c1, c0, 1	@ auxillary control register
+	mrc	p15, 0, r9, c1, c0, 1	@ auxiliary control register
 	mrc	p15, 0, r10, c1, c0, 2	@ co-processor access control
 	mrc	p15, 0, r11, c1, c0, 0	@ control register
 	stmia	r0, {r4 - r11}
@@ -151,7 +151,7 @@ ENTRY(cpu_v6_do_resume)
 	mcr	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0	@ Translation table base 0
 	mcr	p15, 0, r8, c2, c0, 1	@ Translation table base 1
-	mcr	p15, 0, r9, c1, c0, 1	@ auxillary control register
+	mcr	p15, 0, r9, c1, c0, 1	@ auxiliary control register
 	mcr	p15, 0, r10, c1, c0, 2	@ co-processor access control
 	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
 	mcr	p15, 0, ip, c7, c5, 4	@ ISB
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 262fa88a743..babfba09c89 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -211,7 +211,7 @@ cpu_v7_name:
 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl	cpu_v7_suspend_size
 .equ	cpu_v7_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v7_do_suspend)
 	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
@@ -237,7 +237,7 @@ ENTRY(cpu_v7_do_resume)
 	mcr	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r8, c2, c0, 1	@ TTB 1
 	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxillary control register
+	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
 	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access control
 	ldr	r4, =PRRR		@ PRRR
 	ldr	r5, =NMRR		@ NMRR
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 63d8b2044e8..596213699f3 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -417,7 +417,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 
 .globl	cpu_xsc3_suspend_size
 .equ	cpu_xsc3_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xsc3_do_suspend)
 	stmfd	sp!, {r4 - r10, lr}
 	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 086038cd86a..42af97664c9 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -395,7 +395,7 @@ ENTRY(xscale_dma_a0_map_area)
 	teq	r2, #DMA_TO_DEVICE
 	beq	xscale_dma_clean_range
 	b	xscale_dma_flush_range
-ENDPROC(xscsale_dma_a0_map_area)
+ENDPROC(xscale_dma_a0_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)
@@ -518,7 +518,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 
 .globl	cpu_xscale_suspend_size
 .equ	cpu_xscale_suspend_size, 4 * 7
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xscale_do_suspend)
 	stmfd	sp!, {r4 - r10, lr}
 	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index ce81481becf..4268a2bdf14 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -13,7 +13,7 @@
 
 /*
  * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controling CPU frequency. It allows you to change
+ * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
  * the CPU clock speed on the fly.
  */
 
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index 6561c9df5f0..ccc789e21da 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -53,7 +53,7 @@ struct platform_device *__init imx_add_fec(
 	struct resource res[] = {
 		{
 			.start = data->iobase,
-			.end = data->iobase + SZ_4K,
+			.end = data->iobase + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
 			.start = data->irq,
diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
index 10653cc8d1f..805336fdc25 100644
--- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
+++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
@@ -27,7 +27,7 @@ struct platform_device *__init imx_add_imxdi_rtc(
 	struct resource res[] = {
 		{
 			.start = data->iobase,
-			.end = data->iobase + SZ_16K,
+			.end = data->iobase + SZ_16K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
 			.start = data->irq,
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7a107246fd9..6cd6d7f686f 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 {
 	int i, j;
@@ -311,6 +317,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		__raw_writel(~0, port[i].base + GPIO_ISR);
 		for (j = port[i].virtual_irq_start;
 			j < port[i].virtual_irq_start + 32; j++) {
+			irq_set_lockdep_class(j, &gpio_lock_class);
 			irq_set_chip_and_handler(j, &gpio_irq_chip,
 						 handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);
diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h
index 5cd6466964a..6fda788ed0e 100644
--- a/arch/arm/plat-mxc/include/mach/audmux.h
+++ b/arch/arm/plat-mxc/include/mach/audmux.h
@@ -15,6 +15,14 @@
 #define MX31_AUDMUX_PORT5_SSI_PINS_5	4
 #define MX31_AUDMUX_PORT6_SSI_PINS_6	5
 
+#define MX51_AUDMUX_PORT1_SSI0		0
+#define MX51_AUDMUX_PORT2_SSI1		1
+#define MX51_AUDMUX_PORT3		2
+#define MX51_AUDMUX_PORT4		3
+#define MX51_AUDMUX_PORT5		4
+#define MX51_AUDMUX_PORT6		5
+#define MX51_AUDMUX_PORT7		6
+
 /* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
 #define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
 #define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
@@ -28,7 +36,7 @@
 #define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
 #define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
 
-/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */
 #define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
 #define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
 #define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index bd9bb979914..2e49e71b1b9 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -33,9 +33,9 @@
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
 
-	@ this macro checks which interrupt occured
+	@ this macro checks which interrupt occurred
 	@ and returns its number in irqnr
-	@ and returns if an interrupt occured in irqstat
+	@ and returns if an interrupt occurred in irqstat
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 #ifndef CONFIG_MXC_TZIC
 	@ Load offset & priority of the highest priority
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index c4f116d214f..7a9b20abda0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -90,12 +90,12 @@
 #define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
 #define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
 #define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | 24)
+#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
+#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
 #define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
 #define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
 #define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h
index aaec2a6e7b3..5f2da75a47f 100644
--- a/arch/arm/plat-mxc/include/mach/mx50.h
+++ b/arch/arm/plat-mxc/include/mach/mx50.h
@@ -282,4 +282,8 @@
 #define MX50_INT_APBHDMA_CHAN6	116
 #define MX50_INT_APBHDMA_CHAN7	117
 
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx50_revision(void);
+#endif
+
 #endif /* ifndef __MACH_MX50_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 1eb339e6c85..dede19a766f 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -347,6 +347,7 @@
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 extern int mx51_revision(void);
+extern void mx51_display_revision(void);
 #endif
 
 /* tape-out 1 defines */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 7e072637eef..1aea818d9d3 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -51,6 +51,20 @@
 #define IMX_CHIP_REVISION_3_3		0x33
 #define IMX_CHIP_REVISION_UNKNOWN	0xff
 
+#define IMX_CHIP_REVISION_1_0_STRING		"1.0"
+#define IMX_CHIP_REVISION_1_1_STRING		"1.1"
+#define IMX_CHIP_REVISION_1_2_STRING		"1.2"
+#define IMX_CHIP_REVISION_1_3_STRING		"1.3"
+#define IMX_CHIP_REVISION_2_0_STRING		"2.0"
+#define IMX_CHIP_REVISION_2_1_STRING		"2.1"
+#define IMX_CHIP_REVISION_2_2_STRING		"2.2"
+#define IMX_CHIP_REVISION_2_3_STRING		"2.3"
+#define IMX_CHIP_REVISION_3_0_STRING		"3.0"
+#define IMX_CHIP_REVISION_3_1_STRING		"3.1"
+#define IMX_CHIP_REVISION_3_2_STRING		"3.2"
+#define IMX_CHIP_REVISION_3_3_STRING		"3.3"
+#define IMX_CHIP_REVISION_UNKNOWN_STRING	"unknown"
+
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif
@@ -181,6 +195,15 @@ struct cpu_op {
 	u32 cpu_rate;
 };
 
+int tzic_enable_wake(int is_idle);
+enum mxc_cpu_pwr_mode {
+	WAIT_CLOCKED,		/* wfi only */
+	WAIT_UNCLOCKED,		/* WAIT */
+	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
+	STOP_POWER_ON,		/* just STOP */
+	STOP_POWER_OFF,		/* STOP + SRPG */
+};
+
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 04c0d060d81..6bb96ef1600 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -24,7 +24,7 @@
 
 struct mxc_nand_platform_data {
 	unsigned int width;	/* data bus width in bytes */
-	unsigned int hw_ecc:1;	/* 0 if supress hardware ECC */
+	unsigned int hw_ecc:1;	/* 0 if suppress hardware ECC */
 	unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
 	struct mtd_partition *parts;	/* partition table */
 	int nr_parts;			/* size of parts */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 95be51bfe9a..0417da9f710 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -20,6 +20,8 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+
 static inline void arch_idle(void)
 {
 #ifdef CONFIG_ARCH_MXC91231
@@ -54,7 +56,9 @@ static inline void arch_idle(void)
 			"orr %0, %0, #0x00000004\n"
 			"mcr p15, 0, %0, c1, c0, 0\n"
 			: "=r" (reg));
-	} else
+	} else if (cpu_is_mx51())
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	else
 		cpu_do_idle();
 }
 
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S
index 4ddce565b35..8397a2dd19f 100644
--- a/arch/arm/plat-mxc/ssi-fiq.S
+++ b/arch/arm/plat-mxc/ssi-fiq.S
@@ -124,6 +124,8 @@ imx_ssi_fiq_start:
 1:
 		@ return from FIQ
 		subs	pc, lr, #4
+
+		.align
 imx_ssi_fiq_base:
 		.word 0x0
 imx_ssi_fiq_rx_buffer:
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 9f0c2610595..2237ff8b434 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
+#include <asm/sched_clock.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
 
@@ -105,6 +106,11 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
 }
 
+static cycle_t dummy_get_cycles(struct clocksource *cs)
+{
+	return 0;
+}
+
 static cycle_t mx1_2_get_cycles(struct clocksource *cs)
 {
 	return __raw_readl(timer_base + MX1_2_TCN);
@@ -118,18 +124,35 @@ static cycle_t v2_get_cycles(struct clocksource *cs)
 static struct clocksource clocksource_mxc = {
 	.name 		= "mxc_timer1",
 	.rating		= 200,
-	.read		= mx1_2_get_cycles,
+	.read		= dummy_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static DEFINE_CLOCK_DATA(cd);
+unsigned long long notrace sched_clock(void)
+{
+	cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace mxc_update_sched_clock(void)
+{
+	cycle_t cyc = clocksource_mxc.read(&clocksource_mxc);
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
 	if (timer_is_v2())
 		clocksource_mxc.read = v2_get_cycles;
+	else
+		clocksource_mxc.read = mx1_2_get_cycles;
 
+	init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
 	clocksource_register_hz(&clocksource_mxc, c);
 
 	return 0;
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 7d9f815cede..ea28f98d5d6 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base);
  * Claiming GPIOs, and setting their direction and initial values, is the
  * responsibility of the device drivers.  So is responding to probe().
  *
- * Board-specific knowlege like creating devices or pin setup is to be
+ * Board-specific knowledge like creating devices or pin setup is to be
  * kept out of drivers as much as possible.  In particular, pin setup
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 2ec3b5d9f21..c22217c2ee5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback);
  * If the channel is running the caller must disable interrupts prior calling
  * this function and process the returned value before re-enabling interrupt to
  * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CSSA_L register overflow inbetween the two reads resulting
+ * is a chance for CSSA_L register overflow between the two reads resulting
  * in incorrect return value.
  */
 dma_addr_t omap_get_dma_src_pos(int lch)
@@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos);
  * If the channel is running the caller must disable interrupts prior calling
  * this function and process the returned value before re-enabling interrupt to
  * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CDSA_L register overflow inbetween the two reads resulting
+ * is a chance for CDSA_L register overflow between the two reads resulting
  * in incorrect return value.
  */
 dma_addr_t omap_get_dma_dst_pos(int lch)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d2adcdda23c..bd9e32187ea 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -1372,9 +1372,7 @@ static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
 	.resume_noirq = omap_mpuio_resume_noirq,
 };
 
-/* use platform_driver for this, now that there's no longer any
- * point to sys_device (other than not disturbing old code).
- */
+/* use platform_driver for this. */
 static struct platform_driver omap_mpuio_driver = {
 	.driver		= {
 		.name	= "mpuio",
@@ -1745,7 +1743,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
 }
 
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
+static int omap_gpio_suspend(void)
 {
 	int i;
 
@@ -1795,12 +1793,12 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 	return 0;
 }
 
-static int omap_gpio_resume(struct sys_device *dev)
+static void omap_gpio_resume(void)
 {
 	int i;
 
 	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
-		return 0;
+		return;
 
 	for (i = 0; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
@@ -1836,21 +1834,13 @@ static int omap_gpio_resume(struct sys_device *dev)
 		__raw_writel(bank->saved_wakeup, wake_set);
 		spin_unlock_irqrestore(&bank->lock, flags);
 	}
-
-	return 0;
 }
 
-static struct sysdev_class omap_gpio_sysclass = {
-	.name		= "gpio",
+static struct syscore_ops omap_gpio_syscore_ops = {
 	.suspend	= omap_gpio_suspend,
 	.resume		= omap_gpio_resume,
 };
 
-static struct sys_device omap_gpio_device = {
-	.id		= 0,
-	.cls		= &omap_gpio_sysclass,
-};
-
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
@@ -2108,21 +2098,14 @@ postcore_initcall(omap_gpio_drv_reg);
 
 static int __init omap_gpio_sysinit(void)
 {
-	int ret = 0;
-
 	mpuio_init();
 
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
-		if (ret == 0) {
-			ret = sysdev_class_register(&omap_gpio_sysclass);
-			if (ret == 0)
-				ret = sysdev_register(&omap_gpio_device);
-		}
-	}
+	if (cpu_is_omap16xx() || cpu_class_is_omap2())
+		register_syscore_ops(&omap_gpio_syscore_ops);
 #endif
 
-	return ret;
+	return 0;
 }
 
 arch_initcall(omap_gpio_sysinit);
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index d6f9fa0f62a..cac2e8ac696 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void);
 /* Wrappers for "new style" GPIO calls, using the new infrastructure
  * which lets us plug in FPGA, I2C, and other implementations.
  * *
- * The original OMAP-specfic calls should eventually be removed.
+ * The original OMAP-specific calls should eventually be removed.
  */
 
 #include <linux/errno.h>
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 12b31616503..1527929b445 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -90,7 +90,7 @@ enum omap_ecc {
 		/* 1-bit ecc: stored at end of spare area */
 	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
 	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-		/* 1-bit ecc: stored at begining of spare area as romcode */
+		/* 1-bit ecc: stored at beginning of spare area as romcode */
 	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
 };
 
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 8a51fd58f65..34fc31ee908 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -793,6 +793,8 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
 	clk_enable(obj->clk);
 	errs = iommu_report_fault(obj, &da);
 	clk_disable(obj->clk);
+	if (errs == 0)
+		return IRQ_HANDLED;
 
 	/* Fault callback or TLB/PTE Dynamic loading */
 	if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv))
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index d598d9fd65a..5587acf0eb2 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 		/* resend */
 		return -1;
 	} else {
-		/* wait for recieve confirmation */
+		/* wait for receive confirmation */
 		int attemps = 0;
 		while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) {
 			if (attemps++ > 1000) {
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 9bbda9acb73..a37b8eb65b7 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -536,6 +536,28 @@ int omap_early_device_register(struct omap_device *od)
 	return 0;
 }
 
+static int _od_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	return omap_device_idle(pdev);
+}
+
+static int _od_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	return omap_device_enable(pdev);
+}
+
+static struct dev_power_domain omap_device_power_domain = {
+	.ops = {
+		.runtime_suspend = _od_runtime_suspend,
+		.runtime_resume = _od_runtime_resume,
+		USE_PLATFORM_PM_SLEEP_OPS
+	}
+};
+
 /**
  * omap_device_register - register an omap_device with one omap_hwmod
  * @od: struct omap_device * to register
@@ -549,6 +571,7 @@ int omap_device_register(struct omap_device *od)
 	pr_debug("omap_device: %s: registering\n", od->pdev.name);
 
 	od->pdev.dev.parent = &omap_device_parent;
+	od->pdev.dev.pwr_domain = &omap_device_power_domain;
 	return platform_device_register(&od->pdev);
 }
 
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index dce088f4567..48ebb9479b6 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/slab.h>
 
 #include <mach/gpio.h>
@@ -295,7 +295,7 @@ void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
 }
 
 #ifdef CONFIG_PM
-static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+static int pxa_gpio_suspend(void)
 {
 	struct pxa_gpio_chip *c;
 	int gpio;
@@ -312,7 +312,7 @@ static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int pxa_gpio_resume(struct sys_device *dev)
+static void pxa_gpio_resume(void)
 {
 	struct pxa_gpio_chip *c;
 	int gpio;
@@ -326,22 +326,13 @@ static int pxa_gpio_resume(struct sys_device *dev)
 		__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
 		__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
 	}
-	return 0;
 }
 #else
 #define pxa_gpio_suspend	NULL
 #define pxa_gpio_resume		NULL
 #endif
 
-struct sysdev_class pxa_gpio_sysclass = {
-	.name		= "gpio",
+struct syscore_ops pxa_gpio_syscore_ops = {
 	.suspend	= pxa_gpio_suspend,
 	.resume		= pxa_gpio_resume,
 };
-
-static int __init pxa_gpio_init(void)
-{
-	return sysdev_class_register(&pxa_gpio_sysclass);
-}
-
-core_initcall(pxa_gpio_init);
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 75f65647124..89e68e07b0a 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -434,7 +434,7 @@ typedef unsigned long mfp_cfg_t;
  *
  * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
  * represents a range of MFP pins from "start" to "end", with the offset
- * begining at "offset", to define a single pin, let "end" = -1.
+ * beginning at "offset", to define a single pin, let "end" = -1.
  *
  * use
  *
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index a9aa5ad3f4e..be12eadcce2 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/sysdev.h>
 
 #include <plat/mfp.h>
 
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index c2064c30871..0291bd6e236 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
 obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
-# Architecture dependant builds
+# Architecture dependent builds
 
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index eea75ff81d1..b3d3d027899 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -455,7 +455,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
 
 	/* whilst we will be called later on, we try and re-set the
 	 * cpu frequencies as soon as possible so that we do not end
-	 * up resuming devices and then immediatley having to re-set
+	 * up resuming devices and then immediately having to re-set
 	 * a number of settings once these devices have restarted.
 	 *
 	 * as a note, it is expected devices are not used until they
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 6ad274e7593..c10d10c56e2 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -22,7 +22,7 @@
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/io.h>
@@ -557,7 +557,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
 		break;
 
 	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* I belive in this case we do not have anything to do
+		/* I believe in this case we do not have anything to do
 		 * until the next buffer comes along, and we turn off the
 		 * reload */
 		return;
@@ -1195,19 +1195,12 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
 
 EXPORT_SYMBOL(s3c2410_dma_getposition);
 
-static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
-{
-	return container_of(dev, struct s3c2410_dma_chan, dev);
-}
-
-/* system device class */
+/* system core operations */
 
 #ifdef CONFIG_PM
 
-static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
+static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
 {
-	struct s3c2410_dma_chan *cp = to_dma_chan(dev);
-
 	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
 
 	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
@@ -1222,13 +1215,21 @@ static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
 
 		s3c2410_dma_dostop(cp);
 	}
+}
+
+static int s3c2410_dma_suspend(void)
+{
+	struct s3c2410_dma_chan *cp = s3c2410_chans;
+	int channel;
+
+	for (channel = 0; channel < dma_channels; cp++, channel++)
+		s3c2410_dma_suspend_chan(cp);
 
 	return 0;
 }
 
-static int s3c2410_dma_resume(struct sys_device *dev)
+static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 {
-	struct s3c2410_dma_chan *cp = to_dma_chan(dev);
 	unsigned int no = cp->number | DMACH_LOW_LEVEL;
 
 	/* restore channel's hardware configuration */
@@ -1249,13 +1250,21 @@ static int s3c2410_dma_resume(struct sys_device *dev)
 	return 0;
 }
 
+static void s3c2410_dma_resume(void)
+{
+	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
+	int channel;
+
+	for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+		s3c2410_dma_resume_chan(cp);
+}
+
 #else
 #define s3c2410_dma_suspend NULL
 #define s3c2410_dma_resume  NULL
 #endif /* CONFIG_PM */
 
-struct sysdev_class dma_sysclass = {
-	.name		= "s3c24xx-dma",
+struct syscore_ops dma_syscore_ops = {
 	.suspend	= s3c2410_dma_suspend,
 	.resume		= s3c2410_dma_resume,
 };
@@ -1269,39 +1278,14 @@ static void s3c2410_dma_cache_ctor(void *p)
 
 /* initialisation code */
 
-static int __init s3c24xx_dma_sysclass_init(void)
+static int __init s3c24xx_dma_syscore_init(void)
 {
-	int ret = sysdev_class_register(&dma_sysclass);
-
-	if (ret != 0)
-		printk(KERN_ERR "dma sysclass registration failed\n");
-
-	return ret;
-}
-
-core_initcall(s3c24xx_dma_sysclass_init);
-
-static int __init s3c24xx_dma_sysdev_register(void)
-{
-	struct s3c2410_dma_chan *cp = s3c2410_chans;
-	int channel, ret;
-
-	for (channel = 0; channel < dma_channels; cp++, channel++) {
-		cp->dev.cls = &dma_sysclass;
-		cp->dev.id  = channel;
-		ret = sysdev_register(&cp->dev);
-
-		if (ret) {
-			printk(KERN_ERR "error registering dev for dma %d\n",
-			       channel);
- 			return ret;
-		}
-	}
+	register_syscore_ops(&dma_syscore_ops);
 
 	return 0;
 }
 
-late_initcall(s3c24xx_dma_sysdev_register);
+late_initcall(s3c24xx_dma_syscore_init);
 
 int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
 			    unsigned int stride)
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index c3624d89863..0efb2e2848c 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 
 #include <plat/cpu.h>
@@ -65,7 +64,7 @@ static unsigned long save_extint[3];
 static unsigned long save_eintflt[4];
 static unsigned long save_eintmask;
 
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+int s3c24xx_irq_suspend(void)
 {
 	unsigned int i;
 
@@ -81,7 +80,7 @@ int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-int s3c24xx_irq_resume(struct sys_device *dev)
+void s3c24xx_irq_resume(void)
 {
 	unsigned int i;
 
@@ -93,6 +92,4 @@ int s3c24xx_irq_resume(struct sys_device *dev)
 
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
-	return 0;
 }
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index 46dd078147d..cd6d67c8382 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -208,7 +208,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 	}
 
 	/*
-	 * chained GPIO irq has been sucessfully registered, allocate new gpio
+	 * chained GPIO irq has been successfully registered, allocate new gpio
 	 * int group and assign irq nubmers
 	 */
 
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
index 5259ad458bc..327acb3a446 100644
--- a/arch/arm/plat-s5p/irq-pm.c
+++ b/arch/arm/plat-s5p/irq-pm.c
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/sysdev.h>
 
 #include <plat/cpu.h>
 #include <plat/irqs.h>
@@ -77,17 +76,15 @@ static struct sleep_save eint_save[] = {
 	SAVE_ITEM(S5P_EINT_MASK(3)),
 };
 
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+int s3c24xx_irq_suspend(void)
 {
 	s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
 
 	return 0;
 }
 
-int s3c24xx_irq_resume(struct sys_device *dev)
+void s3c24xx_irq_resume(void)
 {
 	s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
-
-	return 0;
 }
 
diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c
index d592b6304b4..d15dc47b0e3 100644
--- a/arch/arm/plat-s5p/pm.c
+++ b/arch/arm/plat-s5p/pm.c
@@ -19,17 +19,6 @@
 
 #define PFX "s5p pm: "
 
-/* s3c_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
-	/* nothing here yet */
-}
-
 /* s3c_pm_configure_extint
  *
  * configure all external interrupt pins
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 9a82b887491..983c578b827 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -21,7 +21,7 @@ struct clk;
  * @set_parent: set the clock's parent, see clk_set_parent().
  *
  * Group the common clock implementations together so that we
- * don't have to keep setting the same fiels again. We leave
+ * don't have to keep setting the same fields again. We leave
  * enable in struct clk.
  *
  * Adding an extra layer of indirection into the process should
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index cedfff51c82..3aedac0034b 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -68,6 +68,12 @@ extern void s3c24xx_init_uartdevs(char *name,
 struct sys_timer;
 extern struct sys_timer s3c24xx_timer;
 
+extern struct syscore_ops s3c2410_pm_syscore_ops;
+extern struct syscore_ops s3c2412_pm_syscore_ops;
+extern struct syscore_ops s3c2416_pm_syscore_ops;
+extern struct syscore_ops s3c244x_pm_syscore_ops;
+extern struct syscore_ops s3c64xx_irq_syscore_ops;
+
 /* system device classes */
 
 extern struct sysdev_class s3c2410_sysclass;
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 5603db0b79b..3ad8386599c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
  * of control per GPIO, generally in the form of:
  *	0000 = Input
  *	0001 = Output
- *	others = Special functions (dependant on bank)
+ *	others = Special functions (dependent on bank)
  *
  * Note, since the code to deal with the case where there are two control
  * registers instead of one, we do not have a separate set of functions for
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 5e04fa6eda7..1762dcb4cb9 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  *
  * These values control the state of the weak pull-{up,down} resistors
  * available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependant on the chip that is being
+ * up or down settings, and it may be dependent on the chip that is being
  * used to whether the particular mode is available.
  */
 #define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
@@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  * @pull: The configuration for the pull resistor.
  *
  * This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successfull, or a negative error
+ * specified pin. It will return 0 if successful, or a negative error
  * code if the pin cannot support the requested pull setting.
  *
  * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
@@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
  * @drvstr: The new value of the driver strength
  *
  * This function sets the driver strength value for the specified pin.
- * It will return 0 if successfull, or a negative error code if the pin
+ * It will return 0 if successful, or a negative error code if the pin
  * cannot support the requested setting.
 */
 extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index dac35d0a711..8cad4cf19c3 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
  * of control per GPIO, generally in the form of:
  * 0000 = Input
  * 0001 = Output
- * others = Special functions (dependant on bank)
+ * others = Special functions (dependent on bank)
  *
  * Note, since the code to deal with the case where there are two control
  * registers instead of one, we do not have a separate set of function
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 937cc2ace51..7fb6f6be8c8 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -103,14 +103,16 @@ extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
 
 #ifdef CONFIG_PM
 extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
+extern int s3c24xx_irq_suspend(void);
+extern void s3c24xx_irq_resume(void);
 #else
 #define s3c_irqext_wake NULL
 #define s3c24xx_irq_suspend NULL
 #define s3c24xx_irq_resume  NULL
 #endif
 
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
 /* PM debug functions */
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index b0bdf16549d..058e09654fe 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -57,7 +57,7 @@ enum clk_types {
  * @cfg_gpio: Configure the GPIO for a specific card bit-width
  * @cfg_card: Configure the interface for a specific card and speed. This
  *            is necessary the controllers and/or GPIO blocks require the
- *	      changing of driver-strength and other controls dependant on
+ *	      changing of driver-strength and other controls dependent on
  *	      the card and speed of operation.
  *
  * Initialisation data specific to either the machine or the platform
@@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
-/* Helper function availablity */
+/* Helper function availability */
 
 extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c
index e4baf76f374..6b733fafe7c 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -164,7 +164,6 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
  */
 static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
 {
-	void *save_at = phys_to_virt(s3c_sleep_save_phys);
 	unsigned long addr;
 	unsigned long left;
 	void *stkpage;
@@ -192,11 +191,6 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
 			goto skip_check;
 		}
 
-		if (in_region(ptr, left, save_at, 32*4 )) {
-			S3C_PMDBG("skipping %08lx, has save block in\n", addr);
-			goto skip_check;
-		}
-
 		/* calculate and check the checksum */
 
 		calc = crc32_le(~0, ptr, left);
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index d5b58d31903..5c0a440d6e1 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -214,8 +214,9 @@ void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
  *
  * print any IRQs asserted at resume time (ie, we woke from)
 */
-static void s3c_pm_show_resume_irqs(int start, unsigned long which,
-				    unsigned long mask)
+static void __maybe_unused s3c_pm_show_resume_irqs(int start,
+						   unsigned long which,
+						   unsigned long mask)
 {
 	int i;
 
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
index b4ff8d74ac4..f85638c6f5a 100644
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ b/arch/arm/plat-samsung/s3c-pl330.c
@@ -68,7 +68,7 @@ struct s3c_pl330_xfer {
  * @req: Two requests to communicate with the PL330 engine.
  * @callback_fn: Callback function to the client.
  * @rqcfg: Channel configuration for the xfers.
- * @xfer_head: Pointer to the xfer to be next excecuted.
+ * @xfer_head: Pointer to the xfer to be next executed.
  * @dmac: Pointer to the DMAC that manages this channel, NULL if the
  * 	channel is available to be acquired.
  * @client: Client of this channel. NULL if the
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
index 2ae6606930a..fcc0d0ad4a1 100644
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -89,7 +89,7 @@ struct rate_config {
  * @sibling: node for list of clocks having same parents
  * @private_data: clock specific private data
  * @node: list to maintain clocks linearly
- * @cl: clocklook up assoicated with this clock
+ * @cl: clocklook up associated with this clock
  * @dent: object for debugfs
  */
 struct clk {
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index bbf3da012af..f25e7ec8941 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -78,6 +78,14 @@ static void vfp_thread_exit(struct thread_info *thread)
 	put_cpu();
 }
 
+static void vfp_thread_copy(struct thread_info *thread)
+{
+	struct thread_info *parent = current_thread_info();
+
+	vfp_sync_hwstate(parent);
+	thread->vfpstate = parent->vfpstate;
+}
+
 /*
  * When this function is called with the following 'cmd's, the following
  * is true while this function is being run:
@@ -104,12 +112,17 @@ static void vfp_thread_exit(struct thread_info *thread)
 static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 {
 	struct thread_info *thread = v;
+	u32 fpexc;
+#ifdef CONFIG_SMP
+	unsigned int cpu;
+#endif
 
-	if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
-		u32 fpexc = fmrx(FPEXC);
+	switch (cmd) {
+	case THREAD_NOTIFY_SWITCH:
+		fpexc = fmrx(FPEXC);
 
 #ifdef CONFIG_SMP
-		unsigned int cpu = thread->cpu;
+		cpu = thread->cpu;
 
 		/*
 		 * On SMP, if VFP is enabled, save the old state in
@@ -134,13 +147,20 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 		 * old state.
 		 */
 		fmxr(FPEXC, fpexc & ~FPEXC_EN);
-		return NOTIFY_DONE;
-	}
+		break;
 
-	if (cmd == THREAD_NOTIFY_FLUSH)
+	case THREAD_NOTIFY_FLUSH:
 		vfp_thread_flush(thread);
-	else
+		break;
+
+	case THREAD_NOTIFY_EXIT:
 		vfp_thread_exit(thread);
+		break;
+
+	case THREAD_NOTIFY_COPY:
+		vfp_thread_copy(thread);
+		break;
+	}
 
 	return NOTIFY_DONE;
 }
@@ -378,9 +398,9 @@ static void vfp_enable(void *unused)
 }
 
 #ifdef CONFIG_PM
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
-static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
+static int vfp_pm_suspend(void)
 {
 	struct thread_info *ti = current_thread_info();
 	u32 fpexc = fmrx(FPEXC);
@@ -400,34 +420,25 @@ static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int vfp_pm_resume(struct sys_device *dev)
+static void vfp_pm_resume(void)
 {
 	/* ensure we have access to the vfp */
 	vfp_enable(NULL);
 
 	/* and disable it to ensure the next usage restores the state */
 	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-
-	return 0;
 }
 
-static struct sysdev_class vfp_pm_sysclass = {
-	.name		= "vfp",
+static struct syscore_ops vfp_pm_syscore_ops = {
 	.suspend	= vfp_pm_suspend,
 	.resume		= vfp_pm_resume,
 };
 
-static struct sys_device vfp_pm_sysdev = {
-	.cls	= &vfp_pm_sysclass,
-};
-
 static void vfp_pm_init(void)
 {
-	sysdev_class_register(&vfp_pm_sysclass);
-	sysdev_register(&vfp_pm_sysdev);
+	register_syscore_ops(&vfp_pm_syscore_ops);
 }
 
-
 #else
 static inline void vfp_pm_init(void) { }
 #endif /* CONFIG_PM */
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 49642b59f73..e9d689b7c83 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,7 +10,6 @@ config AVR32
 	select GENERIC_IRQ_PROBE
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_SHOW
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  AVR32 is a high-performance 32-bit RISC microprocessor core,
 	  designed for cost-sensitive embedded applications, with particular
diff --git a/arch/avr32/include/asm/setup.h b/arch/avr32/include/asm/setup.h
index ff5b7cf6be4..160543dbec7 100644
--- a/arch/avr32/include/asm/setup.h
+++ b/arch/avr32/include/asm/setup.h
@@ -94,6 +94,13 @@ struct tag_ethernet {
 
 #define ETH_INVALID_PHY	0xff
 
+/* board information */
+#define ATAG_BOARDINFO	0x54410008
+
+struct tag_boardinfo {
+	u32	board_number;
+};
+
 struct tag {
 	struct tag_header hdr;
 	union {
@@ -102,6 +109,7 @@ struct tag {
 		struct tag_cmdline cmdline;
 		struct tag_clock clock;
 		struct tag_ethernet ethernet;
+		struct tag_boardinfo boardinfo;
 	} u;
 };
 
@@ -128,6 +136,7 @@ extern struct tag *bootloader_tags;
 
 extern resource_size_t fbmem_start;
 extern resource_size_t fbmem_size;
+extern u32 board_number;
 
 void setup_processor(void);
 
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index 5c7083916c3..bb0974cce4a 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -391,6 +391,21 @@ static int __init parse_tag_clock(struct tag *tag)
 __tagtable(ATAG_CLOCK, parse_tag_clock);
 
 /*
+ * The board_number correspond to the bd->bi_board_number in U-Boot. This
+ * parameter is only available during initialisation and can be used in some
+ * kind of board identification.
+ */
+u32 __initdata board_number;
+
+static int __init parse_tag_boardinfo(struct tag *tag)
+{
+	board_number = tag->u.boardinfo.board_number;
+
+	return 0;
+}
+__tagtable(ATAG_BOARDINFO, parse_tag_boardinfo);
+
+/*
  * Scan the tag table for this tag, and call its parse function. The
  * tag table is built by the linker from all the __tagtable
  * declarations.
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index b91b2044af9..7aa25756412 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -95,28 +95,6 @@ void _exception(long signr, struct pt_regs *regs, int code,
 	info.si_code = code;
 	info.si_addr = (void __user *)addr;
 	force_sig_info(signr, &info, current);
-
-	/*
-	 * Init gets no signals that it doesn't have a handler for.
-	 * That's all very well, but if it has caused a synchronous
-	 * exception and we ignore the resulting signal, it will just
-	 * generate the same exception over and over again and we get
-	 * nowhere.  Better to kill it and let the kernel panic.
-	 */
-	if (is_global_init(current)) {
-		__sighandler_t handler;
-
-		spin_lock_irq(&current->sighand->siglock);
-		handler = current->sighand->action[signr-1].sa.sa_handler;
-		spin_unlock_irq(&current->sighand->siglock);
-		if (handler == SIG_DFL) {
-			/* init has generated a synchronous exception
-			   and it doesn't have a handler for the signal */
-			printk(KERN_CRIT "init has generated signal %ld "
-			       "but has no handler for it\n", signr);
-			do_exit(signr);
-		}
-	}
 }
 
 asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 442f08c5e64..86925fd6ea5 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -35,22 +35,30 @@ void at32_clk_register(struct clk *clk)
 	spin_unlock(&clk_list_lock);
 }
 
-struct clk *clk_get(struct device *dev, const char *id)
+static struct clk *__clk_get(struct device *dev, const char *id)
 {
 	struct clk *clk;
 
-	spin_lock(&clk_list_lock);
-
 	list_for_each_entry(clk, &at32_clock_list, list) {
 		if (clk->dev == dev && strcmp(id, clk->name) == 0) {
-			spin_unlock(&clk_list_lock);
 			return clk;
 		}
 	}
 
-	spin_unlock(&clk_list_lock);
 	return ERR_PTR(-ENOENT);
 }
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *clk;
+
+	spin_lock(&clk_list_lock);
+	clk = __clk_get(dev, id);
+	spin_unlock(&clk_list_lock);
+
+	return clk;
+}
+
 EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)
@@ -257,15 +265,15 @@ static int clk_show(struct seq_file *s, void *unused)
 	spin_lock(&clk_list_lock);
 
 	/* show clock tree as derived from the three oscillators */
-	clk = clk_get(NULL, "osc32k");
+	clk = __clk_get(NULL, "osc32k");
 	dump_clock(clk, &r);
 	clk_put(clk);
 
-	clk = clk_get(NULL, "osc0");
+	clk = __clk_get(NULL, "osc0");
 	dump_clock(clk, &r);
 	clk_put(clk);
 
-	clk = clk_get(NULL, "osc1");
+	clk = __clk_get(NULL, "osc1");
 	dump_clock(clk, &r);
 	clk_put(clk);
 
diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
index 47ba4b9b6db..fbc2aeaebdd 100644
--- a/arch/avr32/mach-at32ap/extint.c
+++ b/arch/avr32/mach-at32ap/extint.c
@@ -61,34 +61,34 @@ struct eic {
 static struct eic *nmi_eic;
 static bool nmi_enabled;
 
-static void eic_ack_irq(struct irq_chip *d)
+static void eic_ack_irq(struct irq_data *d)
 {
-	struct eic *eic = irq_data_get_irq_chip_data(data);
+	struct eic *eic = irq_data_get_irq_chip_data(d);
 	eic_writel(eic, ICR, 1 << (d->irq - eic->first_irq));
 }
 
-static void eic_mask_irq(struct irq_chip *d)
+static void eic_mask_irq(struct irq_data *d)
 {
-	struct eic *eic = irq_data_get_irq_chip_data(data);
+	struct eic *eic = irq_data_get_irq_chip_data(d);
 	eic_writel(eic, IDR, 1 << (d->irq - eic->first_irq));
 }
 
-static void eic_mask_ack_irq(struct irq_chip *d)
+static void eic_mask_ack_irq(struct irq_data *d)
 {
-	struct eic *eic = irq_data_get_irq_chip_data(data);
+	struct eic *eic = irq_data_get_irq_chip_data(d);
 	eic_writel(eic, ICR, 1 << (d->irq - eic->first_irq));
 	eic_writel(eic, IDR, 1 << (d->irq - eic->first_irq));
 }
 
-static void eic_unmask_irq(struct irq_chip *d)
+static void eic_unmask_irq(struct irq_data *d)
 {
-	struct eic *eic = irq_data_get_irq_chip_data(data);
+	struct eic *eic = irq_data_get_irq_chip_data(d);
 	eic_writel(eic, IER, 1 << (d->irq - eic->first_irq));
 }
 
-static int eic_set_irq_type(struct irq_chip *d, unsigned int flow_type)
+static int eic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
-	struct eic *eic = irq_data_get_irq_chip_data(data);
+	struct eic *eic = irq_data_get_irq_chip_data(d);
 	unsigned int irq = d->irq;
 	unsigned int i = irq - eic->first_irq;
 	u32 mode, edge, level;
@@ -191,7 +191,7 @@ static int __init eic_probe(struct platform_device *pdev)
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	int_irq = platform_get_irq(pdev, 0);
-	if (!regs || !int_irq) {
+	if (!regs || (int)int_irq <= 0) {
 		dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
 		return -ENXIO;
 	}
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 21ce35f33aa..3e3646186c9 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -12,7 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/io.h>
 
@@ -21,7 +21,6 @@
 struct intc {
 	void __iomem		*regs;
 	struct irq_chip		chip;
-	struct sys_device	sysdev;
 #ifdef CONFIG_PM
 	unsigned long		suspend_ipr;
 	unsigned long		saved_ipr[64];
@@ -146,9 +145,8 @@ void intc_set_suspend_handler(unsigned long offset)
 	intc0.suspend_ipr = offset;
 }
 
-static int intc_suspend(struct sys_device *sdev, pm_message_t state)
+static int intc_suspend(void)
 {
-	struct intc *intc = container_of(sdev, struct intc, sysdev);
 	int i;
 
 	if (unlikely(!irqs_disabled())) {
@@ -156,28 +154,25 @@ static int intc_suspend(struct sys_device *sdev, pm_message_t state)
 		return -EINVAL;
 	}
 
-	if (unlikely(!intc->suspend_ipr)) {
+	if (unlikely(!intc0.suspend_ipr)) {
 		pr_err("intc_suspend: suspend_ipr not initialized\n");
 		return -EINVAL;
 	}
 
 	for (i = 0; i < 64; i++) {
-		intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i);
-		intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr);
+		intc0.saved_ipr[i] = intc_readl(&intc0, INTPR0 + 4 * i);
+		intc_writel(&intc0, INTPR0 + 4 * i, intc0.suspend_ipr);
 	}
 
 	return 0;
 }
 
-static int intc_resume(struct sys_device *sdev)
+static int intc_resume(void)
 {
-	struct intc *intc = container_of(sdev, struct intc, sysdev);
 	int i;
 
-	WARN_ON(!irqs_disabled());
-
 	for (i = 0; i < 64; i++)
-		intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]);
+		intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]);
 
 	return 0;
 }
@@ -186,27 +181,18 @@ static int intc_resume(struct sys_device *sdev)
 #define intc_resume	NULL
 #endif
 
-static struct sysdev_class intc_class = {
-	.name		= "intc",
+static struct syscore_ops intc_syscore_ops = {
 	.suspend	= intc_suspend,
 	.resume		= intc_resume,
 };
 
-static int __init intc_init_sysdev(void)
+static int __init intc_init_syscore(void)
 {
-	int ret;
-
-	ret = sysdev_class_register(&intc_class);
-	if (ret)
-		return ret;
+	register_syscore_ops(&intc_syscore_ops);
 
-	intc0.sysdev.id = 0;
-	intc0.sysdev.cls = &intc_class;
-	ret = sysdev_register(&intc0.sysdev);
-
-	return ret;
+	return 0;
 }
-device_initcall(intc_init_sysdev);
+device_initcall(intc_init_syscore);
 
 unsigned long intc_get_pending(unsigned int group)
 {
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 37534103574..2e0aa853a4b 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -257,7 +257,7 @@ static void gpio_irq_mask(struct irq_data *d)
 	pio_writel(pio, IDR, 1 << (gpio & 0x1f));
 }
 
-static void gpio_irq_unmask(struct irq_data *d))
+static void gpio_irq_unmask(struct irq_data *d)
 {
 	unsigned		gpio = irq_to_gpio(d->irq);
 	struct pio_device	*pio = &pio_dev[gpio >> 5];
@@ -282,7 +282,7 @@ static struct irq_chip gpio_irqchip = {
 
 static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct pio_device	*pio = get_irq_desc_chip_data(desc);
+	struct pio_device	*pio = irq_desc_get_chip_data(desc);
 	unsigned		gpio_irq;
 
 	gpio_irq = (unsigned) irq_get_handler_data(irq);
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
index 17503b0ed6c..f868f4ce761 100644
--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -53,7 +53,7 @@ cpu_enter_idle:
 	st.w	r8[TI_flags], r9
 	unmask_interrupts
 	sleep	CPU_SLEEP_IDLE
-	.size	cpu_idle_sleep, . - cpu_idle_sleep
+	.size	cpu_enter_idle, . - cpu_enter_idle
 
 	/*
 	 * Common return path for PM functions that don't run from
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 672c21632f2..8addb1220b4 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -34,7 +34,6 @@ config BLACKFIN
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
 	select IRQ_PER_CPU if SMP
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 
 config GENERIC_CSUM
 	def_bool y
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index acb83799a21..2641731f24c 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -59,7 +59,7 @@ config EXACT_HWERR
           be reported multiple cycles after the error happens. This delay
 	  can cause the wrong application, or even the kernel to receive a
 	  signal to be killed. If you are getting HW errors in your system,
-	  try turning this on to ensure they are at least comming from the
+	  try turning this on to ensure they are at least coming from the
 	  proper thread.
 
 	  On production systems, it is safe (and a small optimization) to say N.
diff --git a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
index 362f59dd522..ad0881ba30a 100644
--- a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
+++ b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
@@ -46,7 +46,6 @@ CONFIG_UNIX=y
 # CONFIG_WIRELESS is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 6883803e6ca..580bf4296a1 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -70,7 +70,6 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_PHYSMAP=m
 CONFIG_MTD_NAND=m
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_PHYLIB=y
 CONFIG_SMSC_PHY=y
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index b7c8451f26a..77a27e31d6d 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -63,7 +63,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 97ebe09a737..85014319672 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index c2457543e58..dbf750cd2db 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -64,7 +64,6 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_GPIO_ADDR=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index baf1c1573e5..07ffbdae34e 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -44,7 +44,6 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index df267588efe..31d954216c0 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -63,7 +63,6 @@ CONFIG_MTD_RAM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 # CONFIG_SCSI_LOWLEVEL is not set
diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig
index f50313657f3..b192acfae38 100644
--- a/arch/blackfin/configs/DNP5370_defconfig
+++ b/arch/blackfin/configs/DNP5370_defconfig
@@ -55,7 +55,6 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 7450127b645..06e9f497fae 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -45,6 +45,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_M25P80=y
 # CONFIG_M25PXX_USE_FAST_READ is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 853809510ee..12e66cd7cda 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -48,6 +48,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_UCLINUX=y
 CONFIG_MTD_NAND=m
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=m
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEV_1000 is not set
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 49762c6bb0d..8a0fed16058 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -25,7 +25,6 @@
 #include <asm-generic/bitops/const_hweight.h>
 #include <asm-generic/bitops/lock.h>
 
-#include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic.h>
 
 #ifndef CONFIG_SMP
@@ -113,6 +112,9 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 
 #endif /* CONFIG_SMP */
 
+/* Needs to be after test_bit and friends */
+#include <asm-generic/bitops/le.h>
+
 /*
  * hweightN: returns the hamming weight (i.e. the number
  * of bits set) of a N-bit word
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index 19e2c7c3e63..44bd0cced72 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -19,11 +19,11 @@
  * Force strict CPU ordering.
  */
 #define nop()  __asm__ __volatile__ ("nop;\n\t" : : )
-#define mb()   __asm__ __volatile__ (""   : : : "memory")
-#define rmb()  __asm__ __volatile__ (""   : : : "memory")
-#define wmb()  __asm__ __volatile__ (""   : : : "memory")
-#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
-#define read_barrier_depends() 		do { } while(0)
+#define smp_mb()  mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define smp_read_barrier_depends()	read_barrier_depends()
 
 #ifdef CONFIG_SMP
 asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value);
@@ -37,16 +37,16 @@ asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr,
 					unsigned long new, unsigned long old);
 
 #ifdef __ARCH_SYNC_CORE_DCACHE
-# define smp_mb()	do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0)
-# define smp_rmb()	do { barrier(); smp_check_barrier(); } while (0)
-# define smp_wmb()	do { barrier(); smp_mark_barrier(); } while (0)
-#define smp_read_barrier_depends()	do { barrier(); smp_check_barrier(); } while (0)
-
+/* Force Core data cache coherence */
+# define mb()	do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0)
+# define rmb()	do { barrier(); smp_check_barrier(); } while (0)
+# define wmb()	do { barrier(); smp_mark_barrier(); } while (0)
+# define read_barrier_depends()	do { barrier(); smp_check_barrier(); } while (0)
 #else
-# define smp_mb()	barrier()
-# define smp_rmb()	barrier()
-# define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	barrier()
+# define mb()	barrier()
+# define rmb()	barrier()
+# define wmb()	barrier()
+# define read_barrier_depends()	do { } while (0)
 #endif
 
 static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
@@ -99,10 +99,10 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 
 #else /* !CONFIG_SMP */
 
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
+#define mb()	barrier()
+#define rmb()	barrier()
+#define wmb()	barrier()
+#define read_barrier_depends()	do { } while (0)
 
 struct __xchg_dummy {
 	unsigned long a[100];
diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h
index 9fe0da612c0..70c4e511cae 100644
--- a/arch/blackfin/include/asm/traps.h
+++ b/arch/blackfin/include/asm/traps.h
@@ -57,7 +57,7 @@
 #define HWC_x3(level) \
 	"External Memory Addressing Error\n"
 #define EXC_0x04(level) \
-	"Unimplmented exception occured\n" \
+	"Unimplmented exception occurred\n" \
 	level " - Maybe you forgot to install a custom exception handler?\n"
 #define HWC_x12(level) \
 	"Performance Monitor Overflow\n"
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index cdbe075de1d..8b81dc04488 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -268,7 +268,7 @@ void disable_gptimers(uint16_t mask)
 	_disable_gptimers(mask);
 	for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
 		if (mask & (1 << i))
-			group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i];
+			group_regs[BFIN_TIMER_OCTET(i)]->status = trun_mask[i];
 	SSYNC();
 }
 EXPORT_SYMBOL(disable_gptimers);
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index b8cfe34989e..9b80b152435 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -181,7 +181,7 @@ static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 		return -ENOSPC;
 	}
 
-	/* Becasue hardware data watchpoint impelemented in current
+	/* Because hardware data watchpoint impelemented in current
 	 * Blackfin can not trigger an exception event as the hardware
 	 * instrction watchpoint does, we ignaore all data watch point here.
 	 * They can be turned on easily after future blackfin design
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index a6dfa6b71e6..35e350cad9d 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -4,7 +4,7 @@
  * Licensed under the GPL-2 or later
  */
 
-#define pr_fmt(fmt) "module %s: " fmt
+#define pr_fmt(fmt) "module %s: " fmt, mod->name
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
@@ -57,8 +57,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 inst memory allocation failed\n",
-					mod->name);
+				pr_err("L1 inst memory allocation failed\n");
 				return -1;
 			}
 			dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -70,8 +69,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 data memory allocation failed\n",
-					mod->name);
+				pr_err("L1 data memory allocation failed\n");
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -83,8 +81,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_data_sram_zalloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 data memory allocation failed\n",
-					mod->name);
+				pr_err("L1 data memory allocation failed\n");
 				return -1;
 			}
 
@@ -93,8 +90,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.data_b_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 data memory allocation failed\n",
-					mod->name);
+				pr_err("L1 data memory allocation failed\n");
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -104,8 +100,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.bss_b_l1 = dest;
 			if (dest == NULL) {
-				pr_err("L1 data memory allocation failed\n",
-					mod->name);
+				pr_err("L1 data memory allocation failed\n");
 				return -1;
 			}
 			memset(dest, 0, s->sh_size);
@@ -117,8 +112,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.text_l2 = dest;
 			if (dest == NULL) {
-				pr_err("L2 SRAM allocation failed\n",
-					mod->name);
+				pr_err("L2 SRAM allocation failed\n");
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -130,8 +124,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.data_l2 = dest;
 			if (dest == NULL) {
-				pr_err("L2 SRAM allocation failed\n",
-					mod->name);
+				pr_err("L2 SRAM allocation failed\n");
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -143,8 +136,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			dest = l2_sram_zalloc(s->sh_size);
 			mod->arch.bss_l2 = dest;
 			if (dest == NULL) {
-				pr_err("L2 SRAM allocation failed\n",
-					mod->name);
+				pr_err("L2 SRAM allocation failed\n");
 				return -1;
 			}
 
@@ -160,9 +152,9 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 
 int
 apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
-	       unsigned int symindex, unsigned int relsec, struct module *me)
+	       unsigned int symindex, unsigned int relsec, struct module *mod)
 {
-	pr_err(".rel unsupported\n", me->name);
+	pr_err(".rel unsupported\n");
 	return -ENOEXEC;
 }
 
@@ -186,7 +178,7 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 	Elf32_Sym *sym;
 	unsigned long location, value, size;
 
-	pr_debug("applying relocate section %u to %u\n", mod->name,
+	pr_debug("applying relocate section %u to %u\n",
 		relsec, sechdrs[relsec].sh_info);
 
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
@@ -203,14 +195,14 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 
 #ifdef CONFIG_SMP
 		if (location >= COREB_L1_DATA_A_START) {
-			pr_err("cannot relocate in L1: %u (SMP kernel)",
-				mod->name, ELF32_R_TYPE(rel[i].r_info));
+			pr_err("cannot relocate in L1: %u (SMP kernel)\n",
+				ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
 #endif
 
 		pr_debug("location is %lx, value is %lx type is %d\n",
-			mod->name, location, value, ELF32_R_TYPE(rel[i].r_info));
+			location, value, ELF32_R_TYPE(rel[i].r_info));
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
@@ -230,11 +222,11 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		case R_BFIN_PCREL12_JUMP_S:
 		case R_BFIN_PCREL10:
 			pr_err("unsupported relocation: %u (no -mlong-calls?)\n",
-				mod->name, ELF32_R_TYPE(rel[i].r_info));
+				ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 
 		default:
-			pr_err("unknown relocation: %u\n", mod->name,
+			pr_err("unknown relocation: %u\n",
 				ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
@@ -251,8 +243,7 @@ apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 			isram_memcpy((void *)location, &value, size);
 			break;
 		default:
-			pr_err("invalid relocation for %#lx\n",
-				mod->name, location);
+			pr_err("invalid relocation for %#lx\n", location);
 			return -ENOEXEC;
 		}
 	}
diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c
index 0b5f72f17fd..401eb1d8e3b 100644
--- a/arch/blackfin/kernel/nmi.c
+++ b/arch/blackfin/kernel/nmi.c
@@ -12,7 +12,7 @@
 
 #include <linux/bitops.h>
 #include <linux/hardirq.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/pm.h>
 #include <linux/nmi.h>
 #include <linux/smp.h>
@@ -196,43 +196,31 @@ void touch_nmi_watchdog(void)
 
 /* Suspend/resume support */
 #ifdef CONFIG_PM
-static int nmi_wdt_suspend(struct sys_device *dev, pm_message_t state)
+static int nmi_wdt_suspend(void)
 {
 	nmi_wdt_stop();
 	return 0;
 }
 
-static int nmi_wdt_resume(struct sys_device *dev)
+static void nmi_wdt_resume(void)
 {
 	if (nmi_active)
 		nmi_wdt_start();
-	return 0;
 }
 
-static struct sysdev_class nmi_sysclass = {
-	.name		= DRV_NAME,
+static struct syscore_ops nmi_syscore_ops = {
 	.resume		= nmi_wdt_resume,
 	.suspend	= nmi_wdt_suspend,
 };
 
-static struct sys_device device_nmi_wdt = {
-	.id	= 0,
-	.cls	= &nmi_sysclass,
-};
-
-static int __init init_nmi_wdt_sysfs(void)
+static int __init init_nmi_wdt_syscore(void)
 {
-	int error;
-
-	if (!nmi_active)
-		return 0;
+	if (nmi_active)
+		register_syscore_ops(&nmi_syscore_ops);
 
-	error = sysdev_class_register(&nmi_sysclass);
-	if (!error)
-		error = sysdev_register(&device_nmi_wdt);
-	return error;
+	return 0;
 }
-late_initcall(init_nmi_wdt_sysfs);
+late_initcall(init_nmi_wdt_syscore);
 
 #endif	/* CONFIG_PM */
 
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 8c9a43daf80..9e9b60d969d 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -23,29 +23,6 @@
 #include <asm/gptimers.h>
 #include <asm/nmi.h>
 
-/* Accelerators for sched_clock()
- * convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz) / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *
- *  We can use khz divisor instead of mhz to keep a better precision, since
- *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
- *  (mathieu.desnoyers@polymtl.ca)
- *
- *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
- */
-
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
 
@@ -63,7 +40,6 @@ static struct clocksource bfin_cs_cycles = {
 	.rating		= 400,
 	.read		= bfin_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(64),
-	.shift		= CYC2NS_SCALE_FACTOR,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -75,10 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void)
 
 static int __init bfin_cs_cycles_init(void)
 {
-	bfin_cs_cycles.mult = \
-		clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
-
-	if (clocksource_register(&bfin_cs_cycles))
+	if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
 		panic("failed to register clocksource");
 
 	return 0;
@@ -111,7 +84,6 @@ static struct clocksource bfin_cs_gptimer0 = {
 	.rating		= 350,
 	.read		= bfin_read_gptimer0,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= CYC2NS_SCALE_FACTOR,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -125,10 +97,7 @@ static int __init bfin_cs_gptimer0_init(void)
 {
 	setup_gptimer0();
 
-	bfin_cs_gptimer0.mult = \
-		clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift);
-
-	if (clocksource_register(&bfin_cs_gptimer0))
+	if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
 		panic("failed to register clocksource");
 
 	return 0;
@@ -206,8 +175,14 @@ irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = dev_id;
 	smp_mb();
-	evt->event_handler(evt);
+	/*
+	 * We want to ACK before we handle so that we can handle smaller timer
+	 * intervals.  This way if the timer expires again while we're handling
+	 * things, we're more likely to see that 2nd int rather than swallowing
+	 * it by ACKing the int at the end of this handler.
+	 */
 	bfin_gptmr0_ack();
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 59c1df75e4d..655f25d139a 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -98,7 +98,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 	/* send the appropriate signal to the user program */
 	switch (trapnr) {
 
-	/* This table works in conjuction with the one in ./mach-common/entry.S
+	/* This table works in conjunction with the one in ./mach-common/entry.S
 	 * Some exceptions are handled there (in assembly, in exception space)
 	 * Some are handled here, (in C, in interrupt space)
 	 * Some, like CPLB, are handled in both, where the normal path is
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index 3edbd8db659..79caccea85c 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -67,7 +67,7 @@
  *  - DMA version, which do not suffer from this issue. DMA versions have
  *      different name (prefixed by dma_ ), and are located in
  *      ../kernel/bfin_dma_5xx.c
- * Using the dma related functions are recommended for transfering large
+ * Using the dma related functions are recommended for transferring large
  * buffers in/out of FIFOs.
  */
 
diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S
index 80c240acac6..4eca566237a 100644
--- a/arch/blackfin/lib/memmove.S
+++ b/arch/blackfin/lib/memmove.S
@@ -60,7 +60,7 @@ ENTRY(_memmove)
 	[P0++] = R1;
 
 	CC = P2 == 0;             /* any remaining bytes? */
-	P3 = I0;                  /* Ammend P3 to updated ptr. */
+	P3 = I0;                  /* Amend P3 to updated ptr. */
 	IF !CC JUMP .Lbytes;
 	P3 = I1;
 	RTS;
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 2c69785a7bb..3fa335405b3 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -2530,7 +2530,7 @@ static struct resource bfin_pata_resources[] = {
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 0,
 };
-/* CompactFlash Storage Card Memory Mapped Adressing
+/* CompactFlash Storage Card Memory Mapped Addressing
  * /REG = A11 = 1
  */
 static struct resource bfin_pata_resources[] = {
diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c
index 382099fd556..5e4112e518a 100644
--- a/arch/blackfin/mach-common/dpmc.c
+++ b/arch/blackfin/mach-common/dpmc.c
@@ -19,9 +19,6 @@
 
 #define DRIVER_NAME "bfin dpmc"
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, DRIVER_NAME, msg)
-
 struct bfin_dpmc_platform_data *pdata;
 
 /**
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 46ab45704c8..f96933f48a7 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -268,7 +268,7 @@ ENTRY(_handle_bad_cplb)
 	/* To get here, we just tried and failed to change a CPLB
 	 * so, handle things in trap_c (C code), by lowering to
 	 * IRQ5, just like we normally do. Since this is not a
-	 * "normal" return path, we have a do alot of stuff to
+	 * "normal" return path, we have a do a lot of stuff to
 	 * the stack to get ready so, we can fall through - we
 	 * need to make a CPLB exception look like a normal exception
 	 */
@@ -817,7 +817,7 @@ _new_old_task:
 	rets = [sp++];
 
 	/*
-	 * When we come out of resume, r0 carries "old" task, becuase we are
+	 * When we come out of resume, r0 carries "old" task, because we are
 	 * in "new" task.
 	 */
 	rts;
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 581e2b0a71a..76de5724c1e 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -174,7 +174,7 @@ ENTRY(__start)
 	sp.l = lo(KERNEL_CLOCK_STACK);
 	sp.h = hi(KERNEL_CLOCK_STACK);
 	call _init_clocks;
-	sp = usp;	/* usp hasnt been touched, so restore from there */
+	sp = usp;	/* usp hasn't been touched, so restore from there */
 #endif
 
 	/* This section keeps the processor in supervisor mode
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 6e17a265c4d..1fbd94c4445 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -109,10 +109,23 @@ static void ipi_flush_icache(void *info)
 	struct blackfin_flush_data *fdata = info;
 
 	/* Invalidate the memory holding the bounds of the flushed region. */
-	invalidate_dcache_range((unsigned long)fdata,
-		(unsigned long)fdata + sizeof(*fdata));
+	blackfin_dcache_invalidate_range((unsigned long)fdata,
+					 (unsigned long)fdata + sizeof(*fdata));
+
+	/* Make sure all write buffers in the data side of the core
+	 * are flushed before trying to invalidate the icache.  This
+	 * needs to be after the data flush and before the icache
+	 * flush so that the SSYNC does the right thing in preventing
+	 * the instruction prefetcher from hitting things in cached
+	 * memory at the wrong time -- it runs much further ahead than
+	 * the pipeline.
+	 */
+	SSYNC();
 
-	flush_icache_range(fdata->start, fdata->end);
+	/* ipi_flaush_icache is invoked by generic flush_icache_range,
+	 * so call blackfin arch icache flush directly here.
+	 */
+	blackfin_icache_flush_range(fdata->start, fdata->end);
 }
 
 static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
@@ -164,6 +177,9 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 	while (msg_queue->count) {
 		msg = &msg_queue->ipi_message[msg_queue->head];
 		switch (msg->type) {
+		case BFIN_IPI_RESCHEDULE:
+			scheduler_ipi();
+			break;
 		case BFIN_IPI_CALL_FUNC:
 			spin_unlock_irqrestore(&msg_queue->lock, flags);
 			ipi_call_function(cpu, msg);
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 617925ddd14..a6d03069d0f 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -55,7 +55,6 @@ config CRIS
 	default y
 	select HAVE_IDE
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config HZ
diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm
index 517d1f027fe..67731d75cb5 100644
--- a/arch/cris/arch-v10/README.mm
+++ b/arch/cris/arch-v10/README.mm
@@ -38,7 +38,7 @@ space. We also use it to keep the user-mode virtual mapping in the same
 map during kernel-mode, so that the kernel easily can access the corresponding
 user-mode process' data.
 
-As a comparision, the Linux/i386 2.0 puts the kernel and physical RAM at
+As a comparison, the Linux/i386 2.0 puts the kernel and physical RAM at
 address 0, overlapping with the user-mode virtual space, so that descriptor
 registers are needed for each memory access to specify which MMU space to
 map through. That changed in 2.2, putting the kernel/physical RAM at 
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 399dc1ec8e6..85026537361 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -31,7 +31,7 @@
 #include <asm/sync_serial.h>
 #include <arch/io_interface_mux.h>
 
-/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
+/* The receiver is a bit tricky because of the continuous stream of data.*/
 /*                                                                       */
 /* Three DMA descriptors are linked together. Each DMA descriptor is     */
 /* responsible for port->bufchunk of a common buffer.                    */
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index 3d751250271..7b155f8203b 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -215,7 +215,7 @@ static struct mtd_partition main_partition = {
 };
 #endif
 
-/* Auxilliary partition if we find another flash */
+/* Auxiliary partition if we find another flash */
 static struct mtd_partition aux_partition = {
 	.name = "aux",
 	.size = 0,
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index 25d6f2b3a72..f58f2c1c529 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -165,7 +165,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 	/* Enable the following for a flash based bad block table */
 	/* this->options = NAND_USE_FLASH_BBT; */
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(crisv32_mtd, 1)) {
 		err = -ENXIO;
 		goto out_mtd;
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index c5a0f54763c..d5b0cc9f976 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -156,7 +156,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 	/* Enable the following for a flash based bad block table */
 	/* this->options = NAND_USE_FLASH_BBT; */
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(crisv32_mtd, 1)) {
 		err = -ENXIO;
 		goto out_ior;
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index c8637a9195e..a6a180bc566 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -33,7 +33,7 @@
 #include <asm/sync_serial.h>
 
 
-/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
+/* The receiver is a bit tricky because of the continuous stream of data.*/
 /*                                                                       */
 /* Three DMA descriptors are linked together. Each DMA descriptor is     */
 /* responsible for port->bufchunk of a common buffer.                    */
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 0ecb50b8f0d..3abf12c23e5 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -182,7 +182,7 @@ _syscall_traced:
 	move.d	$r0, [$sp]
 
 	;; The registers carrying parameters (R10-R13) are intact. The optional
-	;; fifth and sixth parameters is in MOF and SRP respectivly. Put them
+	;; fifth and sixth parameters is in MOF and SRP respectively. Put them
 	;; back on the stack.
 	subq	4, $sp
 	move	$srp, [$sp]
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 8023176e19b..68a1a5901ca 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -374,7 +374,7 @@ crisv32_do_multiple(struct pt_regs* regs)
 	irq_enter();
 
 	for (i = 0; i < NBR_REGS; i++) {
-		/* Get which IRQs that happend. */
+		/* Get which IRQs that happened. */
 		masked[i] = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
 			r_masked_vect, i);
 
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 6b653323d79..c0343c3ea7f 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -925,7 +925,7 @@ stub_is_stopped(int sigval)
 
 					if (reg.eda >= bp_d_regs[bp * 2] &&
 					    reg.eda <= bp_d_regs[bp * 2 + 1]) {
-						/* EDA withing range for this BP; it must be the one
+						/* EDA within range for this BP; it must be the one
 						   we're looking for. */
 						stopped_data_address = reg.eda;
 						break;
diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c
index 562f8471890..0570e8ce603 100644
--- a/arch/cris/arch-v32/kernel/process.c
+++ b/arch/cris/arch-v32/kernel/process.c
@@ -149,7 +149,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
         childregs->r10 = 0;	/* Child returns 0 after a fork/clone. */
 
 	/* Set a new TLS ?
-	 * The TLS is in $mof beacuse it is the 5th argument to sys_clone.
+	 * The TLS is in $mof because it is the 5th argument to sys_clone.
 	 */
 	if (p->mm && (clone_flags & CLONE_SETTLS)) {
 		task_thread_info(p)->tls = regs->mof;
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index b3a05ae5621..ce4ab1a5552 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -610,7 +610,7 @@ ugdb_trap_user(struct thread_info *ti, int sig)
 		user_regs(ti)->spc = 0;
 	}
 	/* FIXME: Filter out false h/w breakpoint hits (i.e. EDA
-	   not withing any configured h/w breakpoint range). Synchronize with
+	   not within any configured h/w breakpoint range). Synchronize with
 	   what already exists for kernel debugging.  */
 	if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) {
 		/* Break 8: subtract 2 from ERP unless in a delay slot. */
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 4c9e3e1ba5d..66cc75657e2 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -342,15 +342,18 @@ irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id)
 
 	ipi = REG_RD(intr_vect, irq_regs[smp_processor_id()], rw_ipi);
 
+	if (ipi.vector & IPI_SCHEDULE) {
+		scheduler_ipi();
+	}
 	if (ipi.vector & IPI_CALL) {
-	         func(info);
+		func(info);
 	}
 	if (ipi.vector & IPI_FLUSH_TLB) {
-		     if (flush_mm == FLUSH_ALL)
-			 __flush_tlb_all();
-		     else if (flush_vma == FLUSH_ALL)
+		if (flush_mm == FLUSH_ALL)
+			__flush_tlb_all();
+		else if (flush_vma == FLUSH_ALL)
 			__flush_tlb_mm(flush_mm);
-		     else
+		else
 			__flush_tlb_page(flush_vma, flush_addr);
 	}
 
diff --git a/arch/cris/arch-v32/mach-a3/arbiter.c b/arch/cris/arch-v32/mach-a3/arbiter.c
index 8b924db71c9..15f5c9de263 100644
--- a/arch/cris/arch-v32/mach-a3/arbiter.c
+++ b/arch/cris/arch-v32/mach-a3/arbiter.c
@@ -568,7 +568,7 @@ crisv32_foo_arbiter_irq(int irq, void *dev_id)
 	REG_WR(marb_foo_bp, watch->instance, rw_ack, ack);
 	REG_WR(marb_foo, regi_marb_foo, rw_ack_intr, ack_intr);
 
-	printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs());
+	printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs());
 
 	if (watch->cb)
 		watch->cb();
@@ -624,7 +624,7 @@ crisv32_bar_arbiter_irq(int irq, void *dev_id)
 	REG_WR(marb_bar_bp, watch->instance, rw_ack, ack);
 	REG_WR(marb_bar, regi_marb_bar, rw_ack_intr, ack_intr);
 
-	printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs()->erp);
+	printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs()->erp);
 
 	if (watch->cb)
 		watch->cb();
diff --git a/arch/cris/arch-v32/mach-fs/arbiter.c b/arch/cris/arch-v32/mach-fs/arbiter.c
index 82ef293c4c8..3f8ebb5c147 100644
--- a/arch/cris/arch-v32/mach-fs/arbiter.c
+++ b/arch/cris/arch-v32/mach-fs/arbiter.c
@@ -395,7 +395,7 @@ static irqreturn_t crisv32_arbiter_irq(int irq, void *dev_id)
 	REG_WR(marb_bp, watch->instance, rw_ack, ack);
 	REG_WR(marb, regi_marb, rw_ack_intr, ack_intr);
 
-	printk(KERN_INFO "IRQ occured at %lX\n", get_irq_regs()->erp);
+	printk(KERN_INFO "IRQ occurred at %lX\n", get_irq_regs()->erp);
 
 	if (watch->cb)
 		watch->cb();
diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S
index 2fafe247a25..af55df0994b 100644
--- a/arch/cris/boot/rescue/head_v10.S
+++ b/arch/cris/boot/rescue/head_v10.S
@@ -7,7 +7,7 @@
  * for each partition that this code should check.
  *
  * If any of the checksums fail, we assume the flash is so
- * corrupt that we cant use it to boot into the ftp flash
+ * corrupt that we can't use it to boot into the ftp flash
  * loader, and instead we initialize the serial port to
  * receive a flash-loader and new flash image. we dont include
  * any flash code here, but just accept a certain amount of
diff --git a/arch/cris/include/arch-v32/arch/hwregs/Makefile b/arch/cris/include/arch-v32/arch/hwregs/Makefile
index f9a05d2aa06..b8b3f8d666e 100644
--- a/arch/cris/include/arch-v32/arch/hwregs/Makefile
+++ b/arch/cris/include/arch-v32/arch/hwregs/Makefile
@@ -1,6 +1,6 @@
 # Makefile to generate or copy the latest register definitions
 # and related datastructures and helpermacros.
-# The offical place for these files is at:
+# The official place for these files is at:
 RELEASE ?= r1_alfa5
 OFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/
 
diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile
index a90056a095e..0747a22e3c0 100644
--- a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile
+++ b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile
@@ -1,7 +1,7 @@
 # $Id: Makefile,v 1.3 2004/01/07 20:34:55 johana Exp $
 # Makefile to generate or copy the latest register definitions
 # and related datastructures and helpermacros.
-# The offical place for these files is probably at:
+# The official place for these files is probably at:
 RELEASE ?= r1_alfa5
 IOPOFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/
 
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 9eaae217b21..7df43013835 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -97,7 +97,7 @@ extern unsigned long empty_zero_page;
 #define pte_clear(mm,addr,xp)	do { pte_val(*(xp)) = 0; } while (0)
 
 #define pmd_none(x)     (!pmd_val(x))
-/* by removing the _PAGE_KERNEL bit from the comparision, the same pmd_bad
+/* by removing the _PAGE_KERNEL bit from the comparison, the same pmd_bad
  * works for both _PAGE_TABLE and _KERNPG_TABLE pmd entries.
  */
 #define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_KERNEL)) != _PAGE_TABLE)
diff --git a/arch/cris/kernel/traps.c b/arch/cris/kernel/traps.c
index 541efbf0937..8da53f34c7a 100644
--- a/arch/cris/kernel/traps.c
+++ b/arch/cris/kernel/traps.c
@@ -183,7 +183,7 @@ __initcall(oops_nmi_register);
 
 /*
  * This gets called from entry.S when the watchdog has bitten. Show something
- * similiar to an Oops dump, and if the kernel is configured to be a nice
+ * similar to an Oops dump, and if the kernel is configured to be a nice
  * doggy, then halt instead of reboot.
  */
 void
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 6db8aea5667..064f6219674 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,7 +7,6 @@ config FRV
 	select HAVE_PERF_EVENTS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 
 config ZONE_DMA
 	bool
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
index 0d599790985..ef03baf5d89 100644
--- a/arch/frv/include/asm/pci.h
+++ b/arch/frv/include/asm/pci.h
@@ -54,7 +54,7 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 #endif
 
 /*
- *	These are pretty much arbitary with the CoMEM implementation.
+ *	These are pretty much arbitrary with the CoMEM implementation.
  *	We have the whole address space to ourselves.
  */
 #define PCIBIOS_MIN_IO		0x100
diff --git a/arch/frv/include/asm/spr-regs.h b/arch/frv/include/asm/spr-regs.h
index 01e6af5e99b..d3883021f23 100644
--- a/arch/frv/include/asm/spr-regs.h
+++ b/arch/frv/include/asm/spr-regs.h
@@ -274,7 +274,7 @@
 #define MSR0_RD			0xc0000000	/* rounding mode */
 #define MSR0_RD_NEAREST		0x00000000	/* - nearest */
 #define MSR0_RD_ZERO		0x40000000	/* - zero */
-#define MSR0_RD_POS_INF		0x80000000	/* - postive infinity */
+#define MSR0_RD_POS_INF		0x80000000	/* - positive infinity */
 #define MSR0_RD_NEG_INF		0xc0000000	/* - negative infinity */
 
 /*
diff --git a/arch/frv/include/asm/virtconvert.h b/arch/frv/include/asm/virtconvert.h
index 59788fa2a81..b26d70ab911 100644
--- a/arch/frv/include/asm/virtconvert.h
+++ b/arch/frv/include/asm/virtconvert.h
@@ -1,4 +1,4 @@
-/* virtconvert.h: virtual/physical/page address convertion
+/* virtconvert.h: virtual/physical/page address conversion
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S
index bf35f33e48c..06c5ae191e5 100644
--- a/arch/frv/kernel/entry-table.S
+++ b/arch/frv/kernel/entry-table.S
@@ -86,7 +86,7 @@ __break_usertrap_fixup_table:
 	.globl		__break_kerneltrap_fixup_table
 __break_kerneltrap_fixup_table:
 
-	# handler declaration for a sofware or program interrupt
+	# handler declaration for a software or program interrupt
 .macro VECTOR_SOFTPROG tbr_tt, vec
 	.section .trap.user
 	.org		\tbr_tt
@@ -145,7 +145,7 @@ __break_kerneltrap_fixup_table:
 	.long		\vec
 .endm
 
-	# handler declaration for an MMU only sofware or program interrupt
+	# handler declaration for an MMU only software or program interrupt
 .macro VECTOR_SP_MMU tbr_tt, vec
 #ifdef CONFIG_MMU
  	VECTOR_SOFTPROG	\tbr_tt, \vec
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 931a1ac99ff..e20322ffcaf 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -3,7 +3,6 @@ config H8300
 	default y
 	select HAVE_IDE
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config SYMBOL_PREFIX
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index c4ea0925cdb..e5cc56ae6ce 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -414,11 +414,11 @@ config PERMIT_BSP_REMOVE
 	support. 
 
 config FORCE_CPEI_RETARGET
-	bool "Force assumption that CPEI can be re-targetted"
+	bool "Force assumption that CPEI can be re-targeted"
 	depends on PERMIT_BSP_REMOVE
 	default n
 	---help---
-	Say Y if you need to force the assumption that CPEI can be re-targetted to
+	Say Y if you need to force the assumption that CPEI can be re-targeted to
 	any cpu in the system. This hint is available via ACPI 3.0 specifications.
 	Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP.
 	This option it useful to enable this feature on older BIOS's as well.
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 4ce8d1358fe..c04dd576f33 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -37,6 +37,7 @@
 #include <linux/crash_dump.h>
 #include <linux/iommu-helper.h>
 #include <linux/dma-mapping.h>
+#include <linux/prefetch.h>
 
 #include <asm/delay.h>		/* ia64_get_itc() */
 #include <asm/io.h>
diff --git a/arch/ia64/include/asm/pal.h b/arch/ia64/include/asm/pal.h
index 6a292505b39..2e69284df8e 100644
--- a/arch/ia64/include/asm/pal.h
+++ b/arch/ia64/include/asm/pal.h
@@ -1669,7 +1669,7 @@ typedef union pal_vp_info_u {
 } pal_vp_info_u_t;
 
 /*
- * Returns infomation about virtual processor features
+ * Returns information about virtual processor features
  */
 static inline s64
 ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id)
diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
index 74724b24c2b..a2d560c6723 100644
--- a/arch/ia64/include/asm/perfmon_default_smpl.h
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
@@ -67,8 +67,8 @@ typedef struct {
         unsigned long   ip;                     /* where did the overflow interrupt happened  */
         unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
 
-        unsigned short  cpu;                    /* cpu on which the overflow occured */
-        unsigned short  set;                    /* event set active when overflow ocurred   */
+        unsigned short  cpu;                    /* cpu on which the overflow occurred */
+        unsigned short  set;                    /* event set active when overflow occurred   */
         int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
 } pfm_default_smpl_entry_t;
 
diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h
index 96798d2da7c..cc6c4dbf53a 100644
--- a/arch/ia64/include/asm/sn/bte.h
+++ b/arch/ia64/include/asm/sn/bte.h
@@ -216,7 +216,7 @@ extern void bte_error_handler(unsigned long);
 	bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
 
 /*
- * The following is the prefered way of calling bte_unaligned_copy
+ * The following is the preferred way of calling bte_unaligned_copy
  * If the copy is fully cache line aligned, then bte_copy is
  * used instead.  Since bte_copy is inlined, this saves a call
  * stack.  NOTE: bte_copy is called synchronously and does block
diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h
index 7de1d1d4b71..a84d870f429 100644
--- a/arch/ia64/include/asm/sn/shub_mmr.h
+++ b/arch/ia64/include/asm/sn/shub_mmr.h
@@ -459,7 +459,7 @@
 /* ==================================================================== */
 /* Some MMRs are functionally identical (or close enough) on both SHUB1 */
 /* and SHUB2 that it makes sense to define a geberic name for the MMR.  */
-/* It is acceptible to use (for example) SH_IPI_INT to reference the    */
+/* It is acceptable to use (for example) SH_IPI_INT to reference the    */
 /* the IPI MMR. The value of SH_IPI_INT is determined at runtime based  */
 /* on the type of the SHUB. Do not use these #defines in performance    */
 /* critical code  or loops - there is a small performance penalty.      */
diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
index 6052422a22b..ecb8a49476b 100644
--- a/arch/ia64/include/asm/sn/shubio.h
+++ b/arch/ia64/include/asm/sn/shubio.h
@@ -1383,7 +1383,7 @@ typedef union ii_ibcr_u {
  * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The    *
  * errant header is thereby captured, and no further spurious read      *
  * respones are captured until IXSS[VALID] is cleared by setting the    *
- * appropriate bit in IECLR.Everytime a spurious read response is       *
+ * appropriate bit in IECLR. Every time a spurious read response is     *
  * detected, the SPUR_RD bit of the PRB corresponding to the incoming   *
  * message's SIDN field is set. This always happens, regarless of       *
  * whether a header is captured. The programmer should check            *
@@ -2738,7 +2738,7 @@ typedef union ii_ippr_u {
 /************************************************************************
  *									*
  * The following defines which were not formed into structures are	*
- * probably indentical to another register, and the name of the		*
+ * probably identical to another register, and the name of the		*
  * register is provided against each of these registers. This		*
  * information needs to be checked carefully				*
  *									*
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index 22f61526a8e..f09b174244d 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -23,8 +23,6 @@
 #include <linux/acpi.h>
 #include <acpi/processor.h>
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
-
 MODULE_AUTHOR("Venkatesh Pallipadi");
 MODULE_DESCRIPTION("ACPI Processor P-States Driver");
 MODULE_LICENSE("GPL");
@@ -47,12 +45,12 @@ processor_set_pstate (
 {
 	s64 retval;
 
-	dprintk("processor_set_pstate\n");
+	pr_debug("processor_set_pstate\n");
 
 	retval = ia64_pal_set_pstate((u64)value);
 
 	if (retval) {
-		dprintk("Failed to set freq to 0x%x, with error 0x%lx\n",
+		pr_debug("Failed to set freq to 0x%x, with error 0x%lx\n",
 		        value, retval);
 		return -ENODEV;
 	}
@@ -67,14 +65,14 @@ processor_get_pstate (
 	u64	pstate_index = 0;
 	s64 	retval;
 
-	dprintk("processor_get_pstate\n");
+	pr_debug("processor_get_pstate\n");
 
 	retval = ia64_pal_get_pstate(&pstate_index,
 	                             PAL_GET_PSTATE_TYPE_INSTANT);
 	*value = (u32) pstate_index;
 
 	if (retval)
-		dprintk("Failed to get current freq with "
+		pr_debug("Failed to get current freq with "
 			"error 0x%lx, idx 0x%x\n", retval, *value);
 
 	return (int)retval;
@@ -90,7 +88,7 @@ extract_clock (
 {
 	unsigned long i;
 
-	dprintk("extract_clock\n");
+	pr_debug("extract_clock\n");
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
 		if (value == data->acpi_data.states[i].status)
@@ -110,7 +108,7 @@ processor_get_freq (
 	cpumask_t		saved_mask;
 	unsigned long 		clock_freq;
 
-	dprintk("processor_get_freq\n");
+	pr_debug("processor_get_freq\n");
 
 	saved_mask = current->cpus_allowed;
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
@@ -148,7 +146,7 @@ processor_set_freq (
 	cpumask_t		saved_mask;
 	int			retval;
 
-	dprintk("processor_set_freq\n");
+	pr_debug("processor_set_freq\n");
 
 	saved_mask = current->cpus_allowed;
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
@@ -159,16 +157,16 @@ processor_set_freq (
 
 	if (state == data->acpi_data.state) {
 		if (unlikely(data->resume)) {
-			dprintk("Called after resume, resetting to P%d\n", state);
+			pr_debug("Called after resume, resetting to P%d\n", state);
 			data->resume = 0;
 		} else {
-			dprintk("Already at target state (P%d)\n", state);
+			pr_debug("Already at target state (P%d)\n", state);
 			retval = 0;
 			goto migrate_end;
 		}
 	}
 
-	dprintk("Transitioning from P%d to P%d\n",
+	pr_debug("Transitioning from P%d to P%d\n",
 		data->acpi_data.state, state);
 
 	/* cpufreq frequency struct */
@@ -186,7 +184,7 @@ processor_set_freq (
 
 	value = (u32) data->acpi_data.states[state].control;
 
-	dprintk("Transitioning to state: 0x%08x\n", value);
+	pr_debug("Transitioning to state: 0x%08x\n", value);
 
 	ret = processor_set_pstate(value);
 	if (ret) {
@@ -219,7 +217,7 @@ acpi_cpufreq_get (
 {
 	struct cpufreq_acpi_io *data = acpi_io_data[cpu];
 
-	dprintk("acpi_cpufreq_get\n");
+	pr_debug("acpi_cpufreq_get\n");
 
 	return processor_get_freq(data, cpu);
 }
@@ -235,7 +233,7 @@ acpi_cpufreq_target (
 	unsigned int next_state = 0;
 	unsigned int result = 0;
 
-	dprintk("acpi_cpufreq_setpolicy\n");
+	pr_debug("acpi_cpufreq_setpolicy\n");
 
 	result = cpufreq_frequency_table_target(policy,
 			data->freq_table, target_freq, relation, &next_state);
@@ -255,7 +253,7 @@ acpi_cpufreq_verify (
 	unsigned int result = 0;
 	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
 
-	dprintk("acpi_cpufreq_verify\n");
+	pr_debug("acpi_cpufreq_verify\n");
 
 	result = cpufreq_frequency_table_verify(policy,
 			data->freq_table);
@@ -273,7 +271,7 @@ acpi_cpufreq_cpu_init (
 	struct cpufreq_acpi_io	*data;
 	unsigned int		result = 0;
 
-	dprintk("acpi_cpufreq_cpu_init\n");
+	pr_debug("acpi_cpufreq_cpu_init\n");
 
 	data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
 	if (!data)
@@ -288,7 +286,7 @@ acpi_cpufreq_cpu_init (
 
 	/* capability check */
 	if (data->acpi_data.state_count <= 1) {
-		dprintk("No P-States\n");
+		pr_debug("No P-States\n");
 		result = -ENODEV;
 		goto err_unreg;
 	}
@@ -297,7 +295,7 @@ acpi_cpufreq_cpu_init (
 					ACPI_ADR_SPACE_FIXED_HARDWARE) ||
 	    (data->acpi_data.status_register.space_id !=
 					ACPI_ADR_SPACE_FIXED_HARDWARE)) {
-		dprintk("Unsupported address space [%d, %d]\n",
+		pr_debug("Unsupported address space [%d, %d]\n",
 			(u32) (data->acpi_data.control_register.space_id),
 			(u32) (data->acpi_data.status_register.space_id));
 		result = -ENODEV;
@@ -348,7 +346,7 @@ acpi_cpufreq_cpu_init (
 	       "activated.\n", cpu);
 
 	for (i = 0; i < data->acpi_data.state_count; i++)
-		dprintk("     %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
+		pr_debug("     %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
 			(i == data->acpi_data.state?'*':' '), i,
 			(u32) data->acpi_data.states[i].core_frequency,
 			(u32) data->acpi_data.states[i].power,
@@ -383,7 +381,7 @@ acpi_cpufreq_cpu_exit (
 {
 	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
 
-	dprintk("acpi_cpufreq_cpu_exit\n");
+	pr_debug("acpi_cpufreq_cpu_exit\n");
 
 	if (data) {
 		cpufreq_frequency_table_put_attr(policy->cpu);
@@ -418,7 +416,7 @@ static struct cpufreq_driver acpi_cpufreq_driver = {
 static int __init
 acpi_cpufreq_init (void)
 {
-	dprintk("acpi_cpufreq_init\n");
+	pr_debug("acpi_cpufreq_init\n");
 
  	return cpufreq_register_driver(&acpi_cpufreq_driver);
 }
@@ -427,7 +425,7 @@ acpi_cpufreq_init (void)
 static void __exit
 acpi_cpufreq_exit (void)
 {
-	dprintk("acpi_cpufreq_exit\n");
+	pr_debug("acpi_cpufreq_exit\n");
 
 	cpufreq_unregister_driver(&acpi_cpufreq_driver);
 	return;
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index d52f1f78eff..f64097b5118 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -31,8 +31,6 @@ static struct clocksource clocksource_cyclone = {
         .rating         = 300,
         .read           = read_cyclone,
         .mask           = (1LL << 40) - 1,
-        .mult           = 0, /*to be caluclated*/
-        .shift          = 16,
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -118,9 +116,7 @@ int __init init_cyclone_clock(void)
 	/* initialize last tick */
 	cyclone_mc = cyclone_timer;
 	clocksource_cyclone.fsys_mmio = cyclone_timer;
-	clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
-						clocksource_cyclone.shift);
-	clocksource_register(&clocksource_cyclone);
+	clocksource_register_hz(&clocksource_cyclone, CYCLONE_TIMER_FREQ);
 
 	return 0;
 }
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 5b704740f16..782c3a357f2 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -31,6 +31,7 @@
 #include <linux/irq.h>
 #include <linux/ratelimit.h>
 #include <linux/acpi.h>
+#include <linux/sched.h>
 
 #include <asm/delay.h>
 #include <asm/intrinsics.h>
@@ -496,6 +497,7 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
 			smp_local_flush_tlb();
 			kstat_incr_irqs_this_cpu(irq, desc);
 		} else if (unlikely(IS_RESCHEDULE(vector))) {
+			scheduler_ipi();
 			kstat_incr_irqs_this_cpu(irq, desc);
 		} else {
 			ia64_setreg(_IA64_REG_CR_TPR, vector);
diff --git a/arch/ia64/kernel/perfmon_default_smpl.c b/arch/ia64/kernel/perfmon_default_smpl.c
index 5f637bbfccc..30c644ea44c 100644
--- a/arch/ia64/kernel/perfmon_default_smpl.c
+++ b/arch/ia64/kernel/perfmon_default_smpl.c
@@ -150,7 +150,7 @@ default_handler(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct
 	 * current = task running at the time of the overflow.
 	 *
 	 * per-task mode:
-	 * 	- this is ususally the task being monitored.
+	 * 	- this is usually the task being monitored.
 	 * 	  Under certain conditions, it might be a different task
 	 *
 	 * system-wide:
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 44f11ee411c..14ec641003d 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -703,7 +703,7 @@ int migrate_platform_irqs(unsigned int cpu)
 				data->chip->irq_disable(data);
 				data->chip->irq_set_affinity(data, mask, false);
 				data->chip->irq_enable(data);
-				printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu);
+				printk ("Re-targeting CPEI to cpu %d\n", new_cpei_cpu);
 			}
 		}
 		if (!data) {
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 156ad803d5b..04440cc09b4 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -73,8 +73,6 @@ static struct clocksource clocksource_itc = {
 	.rating         = 350,
 	.read           = itc_get_cycles,
 	.mask           = CLOCKSOURCE_MASK(64),
-	.mult           = 0, /*to be calculated*/
-	.shift          = 16,
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 #ifdef CONFIG_PARAVIRT
 	.resume		= paravirt_clocksource_resume,
@@ -365,11 +363,8 @@ ia64_init_itm (void)
 	ia64_cpu_local_tick();
 
 	if (!itc_clocksource) {
-		/* Sort out mult/shift values: */
-		clocksource_itc.mult =
-			clocksource_hz2mult(local_cpu_data->itc_freq,
-						clocksource_itc.shift);
-		clocksource_register(&clocksource_itc);
+		clocksource_register_hz(&clocksource_itc,
+						local_cpu_data->itc_freq);
 		itc_clocksource = &clocksource_itc;
 	}
 }
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 0baa1bbb65f..0e0e0cc9e39 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -43,7 +43,7 @@ int __ref arch_register_cpu(int num)
 {
 #ifdef CONFIG_ACPI
 	/*
-	 * If CPEI can be re-targetted or if this is not
+	 * If CPEI can be re-targeted or if this is not
 	 * CPEI target, then it is hotpluggable
 	 */
 	if (can_cpei_retarget() || !is_cpu_cpei_target(num))
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 787de4a77d8..53c0ba004e9 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -209,6 +209,7 @@ SECTIONS {
 	data : {
 	} :data
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {
+		_sdata  =  .;
 		INIT_TASK_DATA(PAGE_SIZE)
 		CACHELINE_ALIGNED_DATA(SMP_CACHE_BYTES)
 		READ_MOSTLY_DATA(SMP_CACHE_BYTES)
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index bb862fb224f..b0398740b48 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -987,7 +987,7 @@ static void vmm_sanity_check(struct kvm_vcpu *vcpu)
 
 static void kvm_do_resume_op(struct kvm_vcpu *vcpu)
 {
-	vmm_sanity_check(vcpu); /*Guarantee vcpu runing on healthy vmm!*/
+	vmm_sanity_check(vcpu); /*Guarantee vcpu running on healthy vmm!*/
 
 	if (test_and_clear_bit(KVM_REQ_RESUME, &vcpu->requests)) {
 		vcpu_do_resume(vcpu);
diff --git a/arch/ia64/lib/do_csum.S b/arch/ia64/lib/do_csum.S
index 6bec2fc9f5b..1a431a5cf86 100644
--- a/arch/ia64/lib/do_csum.S
+++ b/arch/ia64/lib/do_csum.S
@@ -201,7 +201,7 @@ GLOBAL_ENTRY(do_csum)
 	;;
 (p6)	adds result1[0]=1,result1[0]
 (p9)	br.cond.sptk .do_csum_exit	// if (count == 1) exit
-	// Fall through to caluculate the checksum, feeding result1[0] as
+	// Fall through to calculate the checksum, feeding result1[0] as
 	// the initial value in result1[0].
 	//
 	// Calculate the checksum loading two 8-byte words per loop.
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 0799fea4c58..20b35937612 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -10,6 +10,7 @@
 #include <linux/interrupt.h>
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
+#include <linux/prefetch.h>
 
 #include <asm/pgtable.h>
 #include <asm/processor.h>
diff --git a/arch/ia64/oprofile/backtrace.c b/arch/ia64/oprofile/backtrace.c
index 5cdd7e4a597..f7b798993ce 100644
--- a/arch/ia64/oprofile/backtrace.c
+++ b/arch/ia64/oprofile/backtrace.c
@@ -29,7 +29,7 @@ typedef struct
 	unsigned int depth;
 	struct pt_regs *regs;
 	struct unw_frame_info frame;
-	u64 *prev_pfs_loc;	/* state for WAR for old spinlock ool code */
+	unsigned long *prev_pfs_loc;	/* state for WAR for old spinlock ool code */
 } ia64_backtrace_t;
 
 /* Returns non-zero if the PC is in the Interrupt Vector Table */
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 7f399f9d99c..81a1f4e6bcd 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -227,7 +227,7 @@ void sn_set_err_irq_affinity(unsigned int irq)
 {
         /*
          * On systems which support CPU disabling (SHub2), all error interrupts
-         * are targetted at the boot CPU.
+         * are targeted at the boot CPU.
          */
         if (is_shub2() && sn_prom_feature_available(PRF_CPU_DISABLE_SUPPORT))
                 set_irq_affinity_info(irq, cpu_physical_id(0), 0);
@@ -412,7 +412,7 @@ sn_call_force_intr_provider(struct sn_irq_info *sn_irq_info)
 	pci_provider = sn_pci_provider[sn_irq_info->irq_bridge_type];
 
 	/* Don't force an interrupt if the irq has been disabled */
-	if (!irqd_irq_disabled(sn_irq_info->irq_irq) &&
+	if (!irqd_irq_disabled(irq_get_irq_data(sn_irq_info->irq_irq)) &&
 	    pci_provider && pci_provider->force_interrupt)
 		(*pci_provider->force_interrupt)(sn_irq_info);
 }
@@ -435,7 +435,7 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info)
 	/*
 	 * Bridge types attached to TIO (anything but PIC) do not need this WAR
 	 * since they do not target Shub II interrupt registers.  If that
-	 * ever changes, this check needs to accomodate.
+	 * ever changes, this check needs to accommodate.
 	 */
 	if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_PIC)
 		return;
diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
index c76d8dc3aea..7aab87f4806 100644
--- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
+++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c
@@ -45,38 +45,6 @@ static int licenseID_open(struct inode *inode, struct file *file)
 	return single_open(file, licenseID_show, NULL);
 }
 
-/*
- * Enable forced interrupt by default.
- * When set, the sn interrupt handler writes the force interrupt register on
- * the bridge chip.  The hardware will then send an interrupt message if the
- * interrupt line is active.  This mimics a level sensitive interrupt.
- */
-extern int sn_force_interrupt_flag;
-
-static int sn_force_interrupt_show(struct seq_file *s, void *p)
-{
-	seq_printf(s, "Force interrupt is %s\n",
-		sn_force_interrupt_flag ? "enabled" : "disabled");
-	return 0;
-}
-
-static ssize_t sn_force_interrupt_write_proc(struct file *file,
-		const char __user *buffer, size_t count, loff_t *data)
-{
-	char val;
-
-	if (copy_from_user(&val, buffer, 1))
-		return -EFAULT;
-
-	sn_force_interrupt_flag = (val == '0') ? 0 : 1;
-	return count;
-}
-
-static int sn_force_interrupt_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, sn_force_interrupt_show, NULL);
-}
-
 static int coherence_id_show(struct seq_file *s, void *p)
 {
 	seq_printf(s, "%d\n", partition_coherence_id());
@@ -114,14 +82,6 @@ static const struct file_operations proc_license_id_fops = {
 	.release	= single_release,
 };
 
-static const struct file_operations proc_sn_force_intr_fops = {
-	.open		= sn_force_interrupt_open,
-	.read		= seq_read,
-	.write		= sn_force_interrupt_write_proc,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
 static const struct file_operations proc_coherence_id_fops = {
 	.open		= coherence_id_open,
 	.read		= seq_read,
@@ -149,8 +109,6 @@ void register_sn_procfs(void)
 	proc_create("system_serial_number", 0444, sgi_proc_dir,
 		    &proc_system_sn_fops);
 	proc_create("licenseID", 0444, sgi_proc_dir, &proc_license_id_fops);
-	proc_create("sn_force_interrupt", 0644, sgi_proc_dir,
-		    &proc_sn_force_intr_fops);
 	proc_create("coherence_id", 0444, sgi_proc_dir,
 		    &proc_coherence_id_fops);
 	proc_create("sn_topology", 0444, sgi_proc_dir, &proc_sn_topo_fops);
diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c
index 21d6f09e344..c34efda122e 100644
--- a/arch/ia64/sn/kernel/sn2/timer.c
+++ b/arch/ia64/sn/kernel/sn2/timer.c
@@ -33,8 +33,6 @@ static struct clocksource clocksource_sn2 = {
         .rating         = 450,
         .read           = read_sn2,
         .mask           = (1LL << 55) - 1,
-        .mult           = 0,
-        .shift          = 10,
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -57,9 +55,7 @@ ia64_sn_udelay (unsigned long usecs)
 void __init sn_timer_init(void)
 {
 	clocksource_sn2.fsys_mmio = RTC_COUNTER_ADDR;
-	clocksource_sn2.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
-							clocksource_sn2.shift);
-	clocksource_register(&clocksource_sn2);
+	clocksource_register_hz(&clocksource_sn2, sn_rtc_cycles_per_second);
 
 	ia64_udelay = &ia64_sn_udelay;
 }
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
index c659ad5613a..33def666a66 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -227,7 +227,7 @@ pcibr_dma_unmap(struct pci_dev *hwdev, dma_addr_t dma_handle, int direction)
  * after doing the read.  For PIC this routine then forces a fake interrupt
  * on another line, which is logically associated with the slot that the PIO
  * is addressed to.  It then spins while watching the memory location that
- * the interrupt is targetted to.  When the interrupt response arrives, we 
+ * the interrupt is targeted to.  When the interrupt response arrives, we 
  * are sure that the DMA has landed in memory and it is safe for the driver
  * to proceed.	For TIOCP use the Device(x) Write Request Buffer Flush 
  * Bridge register since it ensures the data has entered the coherence domain,
diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c
index 108bb858acf..b279e142c63 100644
--- a/arch/ia64/xen/irq_xen.c
+++ b/arch/ia64/xen/irq_xen.c
@@ -92,6 +92,8 @@ static unsigned short saved_irq_cnt;
 static int xen_slab_ready;
 
 #ifdef CONFIG_SMP
+#include <linux/sched.h>
+
 /* Dummy stub. Though we may check XEN_RESCHEDULE_VECTOR before __do_IRQ,
  * it ends up to issue several memory accesses upon percpu data and
  * thus adds unnecessary traffic to other paths.
@@ -99,7 +101,13 @@ static int xen_slab_ready;
 static irqreturn_t
 xen_dummy_handler(int irq, void *dev_id)
 {
+	return IRQ_HANDLED;
+}
 
+static irqreturn_t
+xen_resched_handler(int irq, void *dev_id)
+{
+	scheduler_ipi();
 	return IRQ_HANDLED;
 }
 
@@ -110,7 +118,7 @@ static struct irqaction xen_ipi_irqaction = {
 };
 
 static struct irqaction xen_resched_irqaction = {
-	.handler =	xen_dummy_handler,
+	.handler =	xen_resched_handler,
 	.flags =	IRQF_DISABLED,
 	.name =		"resched"
 };
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index b28d0908a40..736b808d229 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -8,7 +8,6 @@ config M32R
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 
diff --git a/arch/m32r/include/asm/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h
index 2dc89d68b6d..1feae9709f2 100644
--- a/arch/m32r/include/asm/m32104ut/m32104ut_pld.h
+++ b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h
@@ -4,7 +4,7 @@
 /*
  * include/asm-m32r/m32104ut/m32104ut_pld.h
  *
- * Definitions for Programable Logic Device(PLD) on M32104UT board.
+ * Definitions for Programmable Logic Device(PLD) on M32104UT board.
  * Based on m32700ut_pld.h
  *
  * Copyright (c) 2002	Takeo Takahashi
diff --git a/arch/m32r/include/asm/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h
index 57623beb44c..35294670b18 100644
--- a/arch/m32r/include/asm/m32700ut/m32700ut_pld.h
+++ b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h
@@ -4,7 +4,7 @@
 /*
  * include/asm-m32r/m32700ut/m32700ut_pld.h
  *
- * Definitions for Programable Logic Device(PLD) on M32700UT board.
+ * Definitions for Programmable Logic Device(PLD) on M32700UT board.
  *
  * Copyright (c) 2002	Takeo Takahashi
  *
diff --git a/arch/m32r/include/asm/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h
index 3f11ea1aac2..6901401fe9e 100644
--- a/arch/m32r/include/asm/opsput/opsput_pld.h
+++ b/arch/m32r/include/asm/opsput/opsput_pld.h
@@ -4,7 +4,7 @@
 /*
  * include/asm-m32r/opsput/opsput_pld.h
  *
- * Definitions for Programable Logic Device(PLD) on OPSPUT board.
+ * Definitions for Programmable Logic Device(PLD) on OPSPUT board.
  *
  * Copyright (c) 2002	Takeo Takahashi
  *
diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h
index bca3475f959..9cdaf7350ef 100644
--- a/arch/m32r/include/asm/pgtable-2level.h
+++ b/arch/m32r/include/asm/pgtable-2level.h
@@ -44,7 +44,7 @@ static inline int pgd_present(pgd_t pgd)	{ return 1; }
 #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
 /*
- * (pmds are folded into pgds so this doesnt get actually called,
+ * (pmds are folded into pgds so this doesn't get actually called,
  * but the define is needed for a generic inline function.)
  */
 #define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 31cef20b299..fc10b39893d 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -122,8 +122,6 @@ void smp_send_reschedule(int cpu_id)
  *
  * Description:  This routine executes on CPU which received
  *               'RESCHEDULE_IPI'.
- *               Rescheduling is processed at the exit of interrupt
- *               operation.
  *
  * Born on Date: 2002.02.05
  *
@@ -138,7 +136,7 @@ void smp_send_reschedule(int cpu_id)
  *==========================================================================*/
 void smp_reschedule_interrupt(void)
 {
-	/* nothing to do */
+	scheduler_ipi();
 }
 
 /*==========================================================================*
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index c194d64cdbb..cf95aec7746 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -44,6 +44,7 @@ SECTIONS
   EXCEPTION_TABLE(16)
   NOTES
 
+  _sdata = .;			/* Start of data section */
   RODATA
   RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
   _edata = .;			/* End of data section */
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index b8ec002aef8..2c9aeb45384 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -120,7 +120,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
 
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
-	 * kernel and should generate an OOPS.  Unfortunatly, in the case of an
+	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
 	 * erroneous fault occurring in a code path which already holds mmap_sem
 	 * we will deadlock attempting to validate the fault against the
 	 * address space.  Luckily the kernel only validly references user
@@ -128,7 +128,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
 	 * exceptions table.
 	 *
 	 * As the vast majority of faults will be valid we will only perform
-	 * the source reference check when there is a possibilty of a deadlock.
+	 * the source reference check when there is a possibility of a deadlock.
 	 * Attempt to lock the address space, if we cannot we then validate the
 	 * source.  If this is invalid we can skip the address space check,
 	 * thus avoiding the deadlock.
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 6e056d3c5d0..75531da02a4 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -5,7 +5,6 @@ config M68K
 	select HAVE_AOUT if MMU
 	select GENERIC_ATOMIC64 if MMU
 	select HAVE_GENERIC_HARDIRQS if !MMU
-	select GENERIC_HARDIRQS_NO_DEPRECATED if !MMU
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 5890897d28b..95022b04b62 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -36,13 +36,10 @@
 
 /* Hook for MIDI serial driver */
 void (*atari_MIDI_interrupt_hook) (void);
-/* Hook for mouse driver */
-void (*atari_mouse_interrupt_hook) (char *);
 /* Hook for keyboard inputdev  driver */
 void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
 /* Hook for mouse inputdev  driver */
 void (*atari_input_mouse_interrupt_hook) (char *);
-EXPORT_SYMBOL(atari_mouse_interrupt_hook);
 EXPORT_SYMBOL(atari_input_keyboard_interrupt_hook);
 EXPORT_SYMBOL(atari_input_mouse_interrupt_hook);
 
@@ -130,7 +127,7 @@ KEYBOARD_STATE kb_state;
  * it's really hard to decide whether they're mouse or keyboard bytes. Since
  * overruns usually occur when moving the Atari mouse rapidly, they're seen as
  * mouse bytes here. If this is wrong, only a make code of the keyboard gets
- * lost, which isn't too bad. Loosing a break code would be disastrous,
+ * lost, which isn't too bad. Losing a break code would be disastrous,
  * because then the keyboard repeat strikes...
  */
 
@@ -263,8 +260,8 @@ repeat:
 			kb_state.buf[kb_state.len++] = scancode;
 			if (kb_state.len == 3) {
 				kb_state.state = KEYBOARD;
-				if (atari_mouse_interrupt_hook)
-					atari_mouse_interrupt_hook(kb_state.buf);
+				if (atari_input_mouse_interrupt_hook)
+					atari_input_mouse_interrupt_hook(kb_state.buf);
 			}
 			break;
 
@@ -575,7 +572,7 @@ int atari_keyb_init(void)
 	kb_state.len = 0;
 
 	error = request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt,
-			    IRQ_TYPE_SLOW, "keyboard/mouse/MIDI",
+			    IRQ_TYPE_SLOW, "keyboard,mouse,MIDI",
 			    atari_keyboard_interrupt);
 	if (error)
 		return error;
diff --git a/arch/m68k/atari/stdma.c b/arch/m68k/atari/stdma.c
index 604329fafbb..ddbf43ca885 100644
--- a/arch/m68k/atari/stdma.c
+++ b/arch/m68k/atari/stdma.c
@@ -180,7 +180,7 @@ void __init stdma_init(void)
 {
 	stdma_isr = NULL;
 	if (request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED,
-			"ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int))
+			"ST-DMA floppy,ACSI,IDE,Falcon-SCSI", stdma_int))
 		pr_err("Couldn't register ST-DMA interrupt\n");
 }
 
diff --git a/arch/m68k/fpsp040/bindec.S b/arch/m68k/fpsp040/bindec.S
index 72f1159cb80..f2e79523104 100644
--- a/arch/m68k/fpsp040/bindec.S
+++ b/arch/m68k/fpsp040/bindec.S
@@ -609,7 +609,7 @@ do_fint:
 |      A6.  This test occurs only on the first pass.  If the
 |      result is exactly 10^LEN, decrement ILOG and divide
 |      the mantissa by 10.  The calculation of 10^LEN cannot
-|      be inexact, since all powers of ten upto 10^27 are exact
+|      be inexact, since all powers of ten up to 10^27 are exact
 |      in extended precision, so the use of a previous power-of-ten
 |      table will introduce no error.
 |
diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S
index 26e85e2b7a5..78cb60f5bb4 100644
--- a/arch/m68k/ifpsp060/src/fpsp.S
+++ b/arch/m68k/ifpsp060/src/fpsp.S
@@ -11813,7 +11813,7 @@ fmul_unfl_ena:
 	bne.b		fmul_unfl_ena_sd	# no, sgl or dbl
 
 # if the rnd mode is anything but RZ, then we have to re-do the above
-# multiplication becuase we used RZ for all.
+# multiplication because we used RZ for all.
 	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
 
 fmul_unfl_ena_cont:
@@ -18095,7 +18095,7 @@ fscc_mem_op:
 
 	rts
 
-# addresing mode is post-increment. write the result byte. if the write
+# addressing mode is post-increment. write the result byte. if the write
 # fails then don't update the address register. if write passes then
 # call inc_areg() to update the address register.
 fscc_mem_inc:
@@ -20876,7 +20876,7 @@ dst_get_dupper:
 	swap		%d0			# d0 now in upper word
 	lsl.l		&0x4,%d0		# d0 in proper place for dbl prec exp
 	tst.b		FTEMP_EX(%a0)		# test sign
-	bpl.b		dst_get_dman		# if postive, go process mantissa
+	bpl.b		dst_get_dman		# if positive, go process mantissa
 	bset		&0x1f,%d0		# if negative, set sign
 dst_get_dman:
 	mov.l		FTEMP_HI(%a0),%d1	# get ms mantissa
@@ -22943,7 +22943,7 @@ tbl_ovfl_result:
 #	FP_SRC(a6) = packed operand now as a binary FP number		#
 #									#
 # ALGORITHM ***********************************************************	#
-#	Get the correct <ea> whihc is the value on the exception stack	#
+#	Get the correct <ea> which is the value on the exception stack	#
 # frame w/ maybe a correction factor if the <ea> is -(an) or (an)+.	#
 # Then, fetch the operand from memory. If the fetch fails, exit		#
 # through facc_in_x().							#
@@ -24096,7 +24096,7 @@ do_fint12:
 #      A6.  This test occurs only on the first pass.  If the
 #      result is exactly 10^LEN, decrement ILOG and divide
 #      the mantissa by 10.  The calculation of 10^LEN cannot
-#      be inexact, since all powers of ten upto 10^27 are exact
+#      be inexact, since all powers of ten up to 10^27 are exact
 #      in extended precision, so the use of a previous power-of-ten
 #      table will introduce no error.
 #
diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S
index e71ba0ab013..4aedef973cf 100644
--- a/arch/m68k/ifpsp060/src/pfpsp.S
+++ b/arch/m68k/ifpsp060/src/pfpsp.S
@@ -7777,7 +7777,7 @@ dst_get_dupper:
 	swap		%d0			# d0 now in upper word
 	lsl.l		&0x4,%d0		# d0 in proper place for dbl prec exp
 	tst.b		FTEMP_EX(%a0)		# test sign
-	bpl.b		dst_get_dman		# if postive, go process mantissa
+	bpl.b		dst_get_dman		# if positive, go process mantissa
 	bset		&0x1f,%d0		# if negative, set sign
 dst_get_dman:
 	mov.l		FTEMP_HI(%a0),%d1	# get ms mantissa
@@ -8244,7 +8244,7 @@ fmul_unfl_ena:
 	bne.b		fmul_unfl_ena_sd	# no, sgl or dbl
 
 # if the rnd mode is anything but RZ, then we have to re-do the above
-# multiplication becuase we used RZ for all.
+# multiplication because we used RZ for all.
 	fmov.l		L_SCR3(%a6),%fpcr	# set FPCR
 
 fmul_unfl_ena_cont:
@@ -12903,7 +12903,7 @@ store_fpreg_7:
 #	FP_SRC(a6) = packed operand now as a binary FP number		#
 #									#
 # ALGORITHM ***********************************************************	#
-#	Get the correct <ea> whihc is the value on the exception stack	#
+#	Get the correct <ea> which is the value on the exception stack	#
 # frame w/ maybe a correction factor if the <ea> is -(an) or (an)+.	#
 # Then, fetch the operand from memory. If the fetch fails, exit		#
 # through facc_in_x().							#
@@ -14056,7 +14056,7 @@ do_fint12:
 #      A6.  This test occurs only on the first pass.  If the
 #      result is exactly 10^LEN, decrement ILOG and divide
 #      the mantissa by 10.  The calculation of 10^LEN cannot
-#      be inexact, since all powers of ten upto 10^27 are exact
+#      be inexact, since all powers of ten up to 10^27 are exact
 #      in extended precision, so the use of a previous power-of-ten
 #      table will introduce no error.
 #
diff --git a/arch/m68k/include/asm/atariints.h b/arch/m68k/include/asm/atariints.h
index f597892e43a..656bbbf5a6f 100644
--- a/arch/m68k/include/asm/atariints.h
+++ b/arch/m68k/include/asm/atariints.h
@@ -146,7 +146,7 @@ static inline void clear_mfp_bit( unsigned irq, int type )
 
 /*
  * {en,dis}able_irq have the usual semantics of temporary blocking the
- * interrupt, but not loosing requests that happen between disabling and
+ * interrupt, but not losing requests that happen between disabling and
  * enabling. This is done with the MFP mask registers.
  */
 
diff --git a/arch/m68k/include/asm/atarikb.h b/arch/m68k/include/asm/atarikb.h
index 546e7da5804..68f3622bf59 100644
--- a/arch/m68k/include/asm/atarikb.h
+++ b/arch/m68k/include/asm/atarikb.h
@@ -34,8 +34,6 @@ void ikbd_joystick_disable(void);
 
 /* Hook for MIDI serial driver */
 extern void (*atari_MIDI_interrupt_hook) (void);
-/* Hook for mouse driver */
-extern void (*atari_mouse_interrupt_hook) (char *);
 /* Hook for keyboard inputdev  driver */
 extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
 /* Hook for mouse inputdev  driver */
diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h
index 9d69f6e6236..e9020f88a74 100644
--- a/arch/m68k/include/asm/bitops_mm.h
+++ b/arch/m68k/include/asm/bitops_mm.h
@@ -181,14 +181,15 @@ static inline int find_first_zero_bit(const unsigned long *vaddr,
 {
 	const unsigned long *p = vaddr;
 	int res = 32;
+	unsigned int words;
 	unsigned long num;
 
 	if (!size)
 		return 0;
 
-	size = (size + 31) >> 5;
+	words = (size + 31) >> 5;
 	while (!(num = ~*p++)) {
-		if (!--size)
+		if (!--words)
 			goto out;
 	}
 
@@ -196,7 +197,8 @@ static inline int find_first_zero_bit(const unsigned long *vaddr,
 			      : "=d" (res) : "d" (num & -num));
 	res ^= 31;
 out:
-	return ((long)p - (long)vaddr - 4) * 8 + res;
+	res += ((long)p - (long)vaddr - 4) * 8;
+	return res < size ? res : size;
 }
 
 static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
@@ -215,27 +217,32 @@ static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
 		/* Look for zero in first longword */
 		__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
 				      : "=d" (res) : "d" (num & -num));
-		if (res < 32)
-			return offset + (res ^ 31);
+		if (res < 32) {
+			offset += res ^ 31;
+			return offset < size ? offset : size;
+		}
 		offset += 32;
+
+		if (offset >= size)
+			return size;
 	}
 	/* No zero yet, search remaining full bytes for a zero */
-	res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8);
-	return offset + res;
+	return offset + find_first_zero_bit(p, size - offset);
 }
 
 static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
 {
 	const unsigned long *p = vaddr;
 	int res = 32;
+	unsigned int words;
 	unsigned long num;
 
 	if (!size)
 		return 0;
 
-	size = (size + 31) >> 5;
+	words = (size + 31) >> 5;
 	while (!(num = *p++)) {
-		if (!--size)
+		if (!--words)
 			goto out;
 	}
 
@@ -243,7 +250,8 @@ static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
 			      : "=d" (res) : "d" (num & -num));
 	res ^= 31;
 out:
-	return ((long)p - (long)vaddr - 4) * 8 + res;
+	res += ((long)p - (long)vaddr - 4) * 8;
+	return res < size ? res : size;
 }
 
 static inline int find_next_bit(const unsigned long *vaddr, int size,
@@ -262,13 +270,17 @@ static inline int find_next_bit(const unsigned long *vaddr, int size,
 		/* Look for one in first longword */
 		__asm__ __volatile__ ("bfffo %1{#0,#0},%0"
 				      : "=d" (res) : "d" (num & -num));
-		if (res < 32)
-			return offset + (res ^ 31);
+		if (res < 32) {
+			offset += res ^ 31;
+			return offset < size ? offset : size;
+		}
 		offset += 32;
+
+		if (offset >= size)
+			return size;
 	}
 	/* No one yet, search remaining full bytes for a one */
-	res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8);
-	return offset + res;
+	return offset + find_first_bit(p, size - offset);
 }
 
 /*
@@ -366,23 +378,25 @@ static inline int test_bit_le(int nr, const void *vaddr)
 static inline int find_first_zero_bit_le(const void *vaddr, unsigned size)
 {
 	const unsigned long *p = vaddr, *addr = vaddr;
-	int res;
+	int res = 0;
+	unsigned int words;
 
 	if (!size)
 		return 0;
 
-	size = (size >> 5) + ((size & 31) > 0);
-	while (*p++ == ~0UL)
-	{
-		if (--size == 0)
-			return (p - addr) << 5;
+	words = (size >> 5) + ((size & 31) > 0);
+	while (*p++ == ~0UL) {
+		if (--words == 0)
+			goto out;
 	}
 
 	--p;
 	for (res = 0; res < 32; res++)
 		if (!test_bit_le(res, p))
 			break;
-	return (p - addr) * 32 + res;
+out:
+	res += (p - addr) * 32;
+	return res < size ? res : size;
 }
 
 static inline unsigned long find_next_zero_bit_le(const void *addr,
@@ -400,10 +414,15 @@ static inline unsigned long find_next_zero_bit_le(const void *addr,
 		offset -= bit;
 		/* Look for zero in first longword */
 		for (res = bit; res < 32; res++)
-			if (!test_bit_le(res, p))
-				return offset + res;
+			if (!test_bit_le(res, p)) {
+				offset += res;
+				return offset < size ? offset : size;
+			}
 		p++;
 		offset += 32;
+
+		if (offset >= size)
+			return size;
 	}
 	/* No zero yet, search remaining full bytes for a zero */
 	return offset + find_first_zero_bit_le(p, size - offset);
@@ -412,22 +431,25 @@ static inline unsigned long find_next_zero_bit_le(const void *addr,
 static inline int find_first_bit_le(const void *vaddr, unsigned size)
 {
 	const unsigned long *p = vaddr, *addr = vaddr;
-	int res;
+	int res = 0;
+	unsigned int words;
 
 	if (!size)
 		return 0;
 
-	size = (size >> 5) + ((size & 31) > 0);
+	words = (size >> 5) + ((size & 31) > 0);
 	while (*p++ == 0UL) {
-		if (--size == 0)
-			return (p - addr) << 5;
+		if (--words == 0)
+			goto out;
 	}
 
 	--p;
 	for (res = 0; res < 32; res++)
 		if (test_bit_le(res, p))
 			break;
-	return (p - addr) * 32 + res;
+out:
+	res += (p - addr) * 32;
+	return res < size ? res : size;
 }
 
 static inline unsigned long find_next_bit_le(const void *addr,
@@ -445,10 +467,15 @@ static inline unsigned long find_next_bit_le(const void *addr,
 		offset -= bit;
 		/* Look for one in first longword */
 		for (res = bit; res < 32; res++)
-			if (test_bit_le(res, p))
-				return offset + res;
+			if (test_bit_le(res, p)) {
+				offset += res;
+				return offset < size ? offset : size;
+			}
 		p++;
 		offset += 32;
+
+		if (offset >= size)
+			return size;
 	}
 	/* No set bit yet, search remaining full bytes for a set bit */
 	return offset + find_first_bit_le(p, size - offset);
diff --git a/arch/m68k/include/asm/bootstd.h b/arch/m68k/include/asm/bootstd.h
index bdc1a4ac4fe..e518f5a575b 100644
--- a/arch/m68k/include/asm/bootstd.h
+++ b/arch/m68k/include/asm/bootstd.h
@@ -31,7 +31,7 @@
 #define __BN_flash_write_range		20
 
 /* Calling conventions compatible to (uC)linux/68k
- * We use simmilar macros to call into the bootloader as for uClinux
+ * We use similar macros to call into the bootloader as for uClinux
  */
 
 #define __bsc_return(type, res) \
diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
index edf5eb6c08d..a73998528d2 100644
--- a/arch/m68k/include/asm/commproc.h
+++ b/arch/m68k/include/asm/commproc.h
@@ -88,7 +88,7 @@ typedef struct cpm_buf_desc {
 
 
 /* rx bd status/control bits */
-#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
 #define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
 #define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
 #define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
@@ -96,7 +96,7 @@ typedef struct cpm_buf_desc {
 #define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
 #define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
 
-#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
+#define BD_SC_CM	((ushort)0x0200)	/* Continuous mode */
 #define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
 
 #define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
diff --git a/arch/m68k/include/asm/delay_no.h b/arch/m68k/include/asm/delay_no.h
index 55cbd6294ab..c3a0edc90f2 100644
--- a/arch/m68k/include/asm/delay_no.h
+++ b/arch/m68k/include/asm/delay_no.h
@@ -16,7 +16,7 @@ static inline void __delay(unsigned long loops)
 	 * long word alignment which is the faster version.
 	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
 	 * than using a NOP (0x4e71) instruction because it executes in one
-	 * cycle not three and doesn't allow for an arbitary delay waiting
+	 * cycle not three and doesn't allow for an arbitrary delay waiting
 	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
 	 * stall waiting for the register to become valid if such is added
 	 * to the coldfire at some stage.
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index c64c7b74cf8..b2046839f4b 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -31,7 +31,7 @@
  * GPIOs in a single control area, others have some GPIOs implemented in
  * different modules.
  *
- * This implementation attempts accomodate the differences while presenting
+ * This implementation attempts accommodate the differences while presenting
  * a generic interface that will optimize to as few instructions as possible.
  */
 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 55d5a4c5fe0..b6bf2c518ba 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -157,7 +157,7 @@
 #define	MCFFEC_SIZE		0x800		/* Register set size */
 
 /*
- *  Reset Controll Unit.
+ *  Reset Control Unit.
  */
 #define	MCF_RCR			0xFC0A0000
 #define	MCF_RSR			0xFC0A0001
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 8996df62ede..6235921eca4 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -48,7 +48,7 @@
 #define	MCFSIM_DMR1		(MCF_IPSBAR + 0x54)	/* Address mask 1 */
 
 /*
- *  Reset Controll Unit (relative to IPSBAR).
+ *  Reset Control Unit (relative to IPSBAR).
  */
 #define	MCF_RCR			0x110000
 #define	MCF_RSR			0x110001
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 74855a66c05..758810ef91e 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -283,7 +283,7 @@
 #endif
 
 /*
- *  Reset Controll Unit (relative to IPSBAR).
+ *  Reset Control Unit (relative to IPSBAR).
  */
 #define	MCF_RCR			0x110000
 #define	MCF_RSR			0x110001
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 4c94c01f36c..8f8609fcc9b 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -29,7 +29,7 @@
 #define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
 #define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
 #define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_PLLCR		0x08		/* PLL Control Reg*/
 #define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
 #define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
 #define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index 762c58c8905..51e00b00b8a 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -29,7 +29,7 @@
 #define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
 #define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
 #define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_PLLCR		0x08		/* PLL Control Reg*/
 #define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
 #define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
 #define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
diff --git a/arch/m68k/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h
index 6d40f4d18e1..59414cc108d 100644
--- a/arch/m68k/include/asm/m68360_quicc.h
+++ b/arch/m68k/include/asm/m68360_quicc.h
@@ -32,7 +32,7 @@ struct user_data {
     /* BASE + 0x000: user data memory */
     volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
     volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
-    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extention ram */
+    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extension ram */
     volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
 };
 #else
diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h
index 7221f725193..3cf2b6ed685 100644
--- a/arch/m68k/include/asm/mac_oss.h
+++ b/arch/m68k/include/asm/mac_oss.h
@@ -61,7 +61,7 @@
 /*
  * OSS Interrupt levels for various sub-systems
  *
- * This mapping is layed out with two things in mind: first, we try to keep
+ * This mapping is laid out with two things in mind: first, we try to keep
  * things on their own levels to avoid having to do double-dispatches. Second,
  * the levels match as closely as possible the alternate IRQ mapping mode (aka
  * "A/UX mode") available on some VIA machines.
diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h
index 39afb438b65..a59665e1d41 100644
--- a/arch/m68k/include/asm/mac_via.h
+++ b/arch/m68k/include/asm/mac_via.h
@@ -204,7 +204,7 @@
 #define vT2CL	0x1000  /* [VIA only] Timer two counter low. */
 #define vT2CH	0x1200  /* [VIA only] Timer two counter high. */
 #define vSR	0x1400  /* [VIA only] Shift register. */
-#define vACR	0x1600  /* [VIA only] Auxilary control register. */
+#define vACR	0x1600  /* [VIA only] Auxiliary control register. */
 #define vPCR	0x1800  /* [VIA only] Peripheral control register. */
                         /*            CHRP sez never ever to *write* this.
 			 *            Mac family says never to *change* this.
diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h
index 50db3591ca1..c2a1c5eac1a 100644
--- a/arch/m68k/include/asm/macintosh.h
+++ b/arch/m68k/include/asm/macintosh.h
@@ -14,7 +14,7 @@ extern void mac_init_IRQ(void);
 extern int mac_irq_pending(unsigned int);
 
 /*
- *	Floppy driver magic hook - probably shouldnt be here
+ *	Floppy driver magic hook - probably shouldn't be here
  */
 
 extern void via1_set_head(int);
diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
index 92b276fe824..351c2723787 100644
--- a/arch/m68k/include/asm/mcftimer.h
+++ b/arch/m68k/include/asm/mcftimer.h
@@ -27,7 +27,7 @@
 
 /*
  *	Bit definitions for the Timer Mode Register (TMR).
- *	Register bit flags are common accross ColdFires.
+ *	Register bit flags are common across ColdFires.
  */
 #define	MCFTIMER_TMR_PREMASK	0xff00		/* Prescalar mask */
 #define	MCFTIMER_TMR_DISCE	0x0000		/* Disable capture */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 26d851d385b..f3b649de2a1 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -22,7 +22,7 @@
 #define __NR_mknod		 14
 #define __NR_chmod		 15
 #define __NR_chown		 16
-#define __NR_break		 17
+/*#define __NR_break		 17*/
 #define __NR_oldstat		 18
 #define __NR_lseek		 19
 #define __NR_getpid		 20
@@ -36,11 +36,11 @@
 #define __NR_oldfstat		 28
 #define __NR_pause		 29
 #define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
+/*#define __NR_stty		 31*/
+/*#define __NR_gtty		 32*/
 #define __NR_access		 33
 #define __NR_nice		 34
-#define __NR_ftime		 35
+/*#define __NR_ftime		 35*/
 #define __NR_sync		 36
 #define __NR_kill		 37
 #define __NR_rename		 38
@@ -49,7 +49,7 @@
 #define __NR_dup		 41
 #define __NR_pipe		 42
 #define __NR_times		 43
-#define __NR_prof		 44
+/*#define __NR_prof		 44*/
 #define __NR_brk		 45
 #define __NR_setgid		 46
 #define __NR_getgid		 47
@@ -58,13 +58,13 @@
 #define __NR_getegid		 50
 #define __NR_acct		 51
 #define __NR_umount2		 52
-#define __NR_lock		 53
+/*#define __NR_lock		 53*/
 #define __NR_ioctl		 54
 #define __NR_fcntl		 55
-#define __NR_mpx		 56
+/*#define __NR_mpx		 56*/
 #define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
+/*#define __NR_ulimit		 58*/
+/*#define __NR_oldolduname	 59*/
 #define __NR_umask		 60
 #define __NR_chroot		 61
 #define __NR_ustat		 62
@@ -103,10 +103,10 @@
 #define __NR_fchown		 95
 #define __NR_getpriority	 96
 #define __NR_setpriority	 97
-#define __NR_profil		 98
+/*#define __NR_profil		 98*/
 #define __NR_statfs		 99
 #define __NR_fstatfs		100
-#define __NR_ioperm		101
+/*#define __NR_ioperm		101*/
 #define __NR_socketcall		102
 #define __NR_syslog		103
 #define __NR_setitimer		104
@@ -114,11 +114,11 @@
 #define __NR_stat		106
 #define __NR_lstat		107
 #define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		/* 110 */ not supported
+/*#define __NR_olduname		109*/
+/*#define __NR_iopl		110*/ /* not supported */
 #define __NR_vhangup		111
-#define __NR_idle		/* 112 */ Obsolete
-#define __NR_vm86		/* 113 */ not supported
+/*#define __NR_idle		112*/ /* Obsolete */
+/*#define __NR_vm86		113*/ /* not supported */
 #define __NR_wait4		114
 #define __NR_swapoff		115
 #define __NR_sysinfo		116
@@ -132,17 +132,17 @@
 #define __NR_adjtimex		124
 #define __NR_mprotect		125
 #define __NR_sigprocmask	126
-#define __NR_create_module	127
+/*#define __NR_create_module	127*/
 #define __NR_init_module	128
 #define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
+/*#define __NR_get_kernel_syms	130*/
 #define __NR_quotactl		131
 #define __NR_getpgid		132
 #define __NR_fchdir		133
 #define __NR_bdflush		134
 #define __NR_sysfs		135
 #define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+/*#define __NR_afs_syscall	137*/ /* Syscall for Andrew File System */
 #define __NR_setfsuid		138
 #define __NR_setfsgid		139
 #define __NR__llseek		140
@@ -172,7 +172,7 @@
 #define __NR_setresuid		164
 #define __NR_getresuid		165
 #define __NR_getpagesize	166
-#define __NR_query_module	167
+/*#define __NR_query_module	167*/
 #define __NR_poll		168
 #define __NR_nfsservctl		169
 #define __NR_setresgid		170
@@ -193,8 +193,8 @@
 #define __NR_capset		185
 #define __NR_sigaltstack	186
 #define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
+/*#define __NR_getpmsg		188*/	/* some people actually want streams */
+/*#define __NR_putpmsg		189*/	/* some people actually want streams */
 #define __NR_vfork		190
 #define __NR_ugetrlimit		191
 #define __NR_mmap2		192
@@ -223,6 +223,8 @@
 #define __NR_setfsuid32		215
 #define __NR_setfsgid32		216
 #define __NR_pivot_root		217
+/* 218*/
+/* 219*/
 #define __NR_getdents64		220
 #define __NR_gettid		221
 #define __NR_tkill		222
@@ -281,7 +283,7 @@
 #define __NR_mq_notify		275
 #define __NR_mq_getsetattr	276
 #define __NR_waitid		277
-#define __NR_vserver		278
+/*#define __NR_vserver		278*/
 #define __NR_add_key		279
 #define __NR_request_key	280
 #define __NR_keyctl		281
@@ -343,10 +345,14 @@
 #define __NR_fanotify_init	337
 #define __NR_fanotify_mark	338
 #define __NR_prlimit64		339
+#define __NR_name_to_handle_at	340
+#define __NR_open_by_handle_at	341
+#define __NR_clock_adjtime	342
+#define __NR_syncfs		343
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		340
+#define NR_syscalls		344
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/Makefile_mm b/arch/m68k/kernel/Makefile_mm
index 55d5d6b680a..aced6780457 100644
--- a/arch/m68k/kernel/Makefile_mm
+++ b/arch/m68k/kernel/Makefile_mm
@@ -10,7 +10,7 @@ endif
 extra-y	+= vmlinux.lds
 
 obj-y	:= entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
-	   sys_m68k.o time.o setup.o m68k_ksyms.o devres.o
+	   sys_m68k.o time.o setup.o m68k_ksyms.o devres.o syscalltable.o
 
 devres-y = ../../../kernel/irq/devres.o
 
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
index 1559dea36e5..bd0ec05263b 100644
--- a/arch/m68k/kernel/entry_mm.S
+++ b/arch/m68k/kernel/entry_mm.S
@@ -407,347 +407,3 @@ resume:
 
 	rts
 
-.data
-ALIGN
-sys_call_table:
-	.long sys_restart_syscall	/* 0 - old "setup()" system call, used for restarting */
-	.long sys_exit
-	.long sys_fork
-	.long sys_read
-	.long sys_write
-	.long sys_open		/* 5 */
-	.long sys_close
-	.long sys_waitpid
-	.long sys_creat
-	.long sys_link
-	.long sys_unlink	/* 10 */
-	.long sys_execve
-	.long sys_chdir
-	.long sys_time
-	.long sys_mknod
-	.long sys_chmod		/* 15 */
-	.long sys_chown16
-	.long sys_ni_syscall				/* old break syscall holder */
-	.long sys_stat
-	.long sys_lseek
-	.long sys_getpid	/* 20 */
-	.long sys_mount
-	.long sys_oldumount
-	.long sys_setuid16
-	.long sys_getuid16
-	.long sys_stime		/* 25 */
-	.long sys_ptrace
-	.long sys_alarm
-	.long sys_fstat
-	.long sys_pause
-	.long sys_utime		/* 30 */
-	.long sys_ni_syscall				/* old stty syscall holder */
-	.long sys_ni_syscall				/* old gtty syscall holder */
-	.long sys_access
-	.long sys_nice
-	.long sys_ni_syscall	/* 35 */	/* old ftime syscall holder */
-	.long sys_sync
-	.long sys_kill
-	.long sys_rename
-	.long sys_mkdir
-	.long sys_rmdir		/* 40 */
-	.long sys_dup
-	.long sys_pipe
-	.long sys_times
-	.long sys_ni_syscall				/* old prof syscall holder */
-	.long sys_brk		/* 45 */
-	.long sys_setgid16
-	.long sys_getgid16
-	.long sys_signal
-	.long sys_geteuid16
-	.long sys_getegid16	/* 50 */
-	.long sys_acct
-	.long sys_umount				/* recycled never used phys() */
-	.long sys_ni_syscall				/* old lock syscall holder */
-	.long sys_ioctl
-	.long sys_fcntl		/* 55 */
-	.long sys_ni_syscall				/* old mpx syscall holder */
-	.long sys_setpgid
-	.long sys_ni_syscall				/* old ulimit syscall holder */
-	.long sys_ni_syscall
-	.long sys_umask		/* 60 */
-	.long sys_chroot
-	.long sys_ustat
-	.long sys_dup2
-	.long sys_getppid
-	.long sys_getpgrp	/* 65 */
-	.long sys_setsid
-	.long sys_sigaction
-	.long sys_sgetmask
-	.long sys_ssetmask
-	.long sys_setreuid16	/* 70 */
-	.long sys_setregid16
-	.long sys_sigsuspend
-	.long sys_sigpending
-	.long sys_sethostname
-	.long sys_setrlimit	/* 75 */
-	.long sys_old_getrlimit
-	.long sys_getrusage
-	.long sys_gettimeofday
-	.long sys_settimeofday
-	.long sys_getgroups16	/* 80 */
-	.long sys_setgroups16
-	.long sys_old_select
-	.long sys_symlink
-	.long sys_lstat
-	.long sys_readlink	/* 85 */
-	.long sys_uselib
-	.long sys_swapon
-	.long sys_reboot
-	.long sys_old_readdir
-	.long sys_old_mmap	/* 90 */
-	.long sys_munmap
-	.long sys_truncate
-	.long sys_ftruncate
-	.long sys_fchmod
-	.long sys_fchown16	/* 95 */
-	.long sys_getpriority
-	.long sys_setpriority
-	.long sys_ni_syscall				/* old profil syscall holder */
-	.long sys_statfs
-	.long sys_fstatfs	/* 100 */
-	.long sys_ni_syscall				/* ioperm for i386 */
-	.long sys_socketcall
-	.long sys_syslog
-	.long sys_setitimer
-	.long sys_getitimer	/* 105 */
-	.long sys_newstat
-	.long sys_newlstat
-	.long sys_newfstat
-	.long sys_ni_syscall
-	.long sys_ni_syscall	/* 110 */	/* iopl for i386 */
-	.long sys_vhangup
-	.long sys_ni_syscall				/* obsolete idle() syscall */
-	.long sys_ni_syscall				/* vm86old for i386 */
-	.long sys_wait4
-	.long sys_swapoff	/* 115 */
-	.long sys_sysinfo
-	.long sys_ipc
-	.long sys_fsync
-	.long sys_sigreturn
-	.long sys_clone		/* 120 */
-	.long sys_setdomainname
-	.long sys_newuname
-	.long sys_cacheflush				/* modify_ldt for i386 */
-	.long sys_adjtimex
-	.long sys_mprotect	/* 125 */
-	.long sys_sigprocmask
-	.long sys_ni_syscall		/* old "create_module" */
-	.long sys_init_module
-	.long sys_delete_module
-	.long sys_ni_syscall	/* 130 - old "get_kernel_syms" */
-	.long sys_quotactl
-	.long sys_getpgid
-	.long sys_fchdir
-	.long sys_bdflush
-	.long sys_sysfs		/* 135 */
-	.long sys_personality
-	.long sys_ni_syscall				/* for afs_syscall */
-	.long sys_setfsuid16
-	.long sys_setfsgid16
-	.long sys_llseek	/* 140 */
-	.long sys_getdents
-	.long sys_select
-	.long sys_flock
-	.long sys_msync
-	.long sys_readv		/* 145 */
-	.long sys_writev
-	.long sys_getsid
-	.long sys_fdatasync
-	.long sys_sysctl
-	.long sys_mlock		/* 150 */
-	.long sys_munlock
-	.long sys_mlockall
-	.long sys_munlockall
-	.long sys_sched_setparam
-	.long sys_sched_getparam	/* 155 */
-	.long sys_sched_setscheduler
-	.long sys_sched_getscheduler
-	.long sys_sched_yield
-	.long sys_sched_get_priority_max
-	.long sys_sched_get_priority_min  /* 160 */
-	.long sys_sched_rr_get_interval
-	.long sys_nanosleep
-	.long sys_mremap
-	.long sys_setresuid16
-	.long sys_getresuid16	/* 165 */
-	.long sys_getpagesize
-	.long sys_ni_syscall		/* old sys_query_module */
-	.long sys_poll
-	.long sys_nfsservctl
-	.long sys_setresgid16	/* 170 */
-	.long sys_getresgid16
-	.long sys_prctl
-	.long sys_rt_sigreturn
-	.long sys_rt_sigaction
-	.long sys_rt_sigprocmask	/* 175 */
-	.long sys_rt_sigpending
-	.long sys_rt_sigtimedwait
-	.long sys_rt_sigqueueinfo
-	.long sys_rt_sigsuspend
-	.long sys_pread64	/* 180 */
-	.long sys_pwrite64
-	.long sys_lchown16;
-	.long sys_getcwd
-	.long sys_capget
-	.long sys_capset	/* 185 */
-	.long sys_sigaltstack
-	.long sys_sendfile
-	.long sys_ni_syscall				/* streams1 */
-	.long sys_ni_syscall				/* streams2 */
-	.long sys_vfork		/* 190 */
-	.long sys_getrlimit
-	.long sys_mmap2
-	.long sys_truncate64
-	.long sys_ftruncate64
-	.long sys_stat64	/* 195 */
-	.long sys_lstat64
-	.long sys_fstat64
-	.long sys_chown
-	.long sys_getuid
-	.long sys_getgid	/* 200 */
-	.long sys_geteuid
-	.long sys_getegid
-	.long sys_setreuid
-	.long sys_setregid
-	.long sys_getgroups	/* 205 */
-	.long sys_setgroups
-	.long sys_fchown
-	.long sys_setresuid
-	.long sys_getresuid
-	.long sys_setresgid	/* 210 */
-	.long sys_getresgid
-	.long sys_lchown
-	.long sys_setuid
-	.long sys_setgid
-	.long sys_setfsuid	/* 215 */
-	.long sys_setfsgid
-	.long sys_pivot_root
-	.long sys_ni_syscall
-	.long sys_ni_syscall
-	.long sys_getdents64	/* 220 */
-	.long sys_gettid
-	.long sys_tkill
-	.long sys_setxattr
-	.long sys_lsetxattr
-	.long sys_fsetxattr	/* 225 */
-	.long sys_getxattr
-	.long sys_lgetxattr
-	.long sys_fgetxattr
-	.long sys_listxattr
-	.long sys_llistxattr	/* 230 */
-	.long sys_flistxattr
-	.long sys_removexattr
-	.long sys_lremovexattr
-	.long sys_fremovexattr
-	.long sys_futex		/* 235 */
-	.long sys_sendfile64
-	.long sys_mincore
-	.long sys_madvise
-	.long sys_fcntl64
-	.long sys_readahead	/* 240 */
-	.long sys_io_setup
-	.long sys_io_destroy
-	.long sys_io_getevents
-	.long sys_io_submit
-	.long sys_io_cancel	/* 245 */
-	.long sys_fadvise64
-	.long sys_exit_group
-	.long sys_lookup_dcookie
-	.long sys_epoll_create
-	.long sys_epoll_ctl	/* 250 */
-	.long sys_epoll_wait
-	.long sys_remap_file_pages
-	.long sys_set_tid_address
-	.long sys_timer_create
-	.long sys_timer_settime	/* 255 */
-	.long sys_timer_gettime
-	.long sys_timer_getoverrun
-	.long sys_timer_delete
-	.long sys_clock_settime
-	.long sys_clock_gettime	/* 260 */
-	.long sys_clock_getres
-	.long sys_clock_nanosleep
-	.long sys_statfs64
-	.long sys_fstatfs64
-	.long sys_tgkill	/* 265 */
-	.long sys_utimes
-	.long sys_fadvise64_64
-	.long sys_mbind
-	.long sys_get_mempolicy
-	.long sys_set_mempolicy	/* 270 */
-	.long sys_mq_open
-	.long sys_mq_unlink
-	.long sys_mq_timedsend
-	.long sys_mq_timedreceive
-	.long sys_mq_notify	/* 275 */
-	.long sys_mq_getsetattr
-	.long sys_waitid
-	.long sys_ni_syscall	/* for sys_vserver */
-	.long sys_add_key
-	.long sys_request_key	/* 280 */
-	.long sys_keyctl
-	.long sys_ioprio_set
-	.long sys_ioprio_get
-	.long sys_inotify_init
-	.long sys_inotify_add_watch	/* 285 */
-	.long sys_inotify_rm_watch
-	.long sys_migrate_pages
-	.long sys_openat
-	.long sys_mkdirat
-	.long sys_mknodat		/* 290 */
-	.long sys_fchownat
-	.long sys_futimesat
-	.long sys_fstatat64
-	.long sys_unlinkat
-	.long sys_renameat		/* 295 */
-	.long sys_linkat
-	.long sys_symlinkat
-	.long sys_readlinkat
-	.long sys_fchmodat
-	.long sys_faccessat		/* 300 */
-	.long sys_ni_syscall		/* Reserved for pselect6 */
-	.long sys_ni_syscall		/* Reserved for ppoll */
-	.long sys_unshare
-	.long sys_set_robust_list
-	.long sys_get_robust_list	/* 305 */
-	.long sys_splice
-	.long sys_sync_file_range
-	.long sys_tee
-	.long sys_vmsplice
-	.long sys_move_pages		/* 310 */
-	.long sys_sched_setaffinity
-	.long sys_sched_getaffinity
-	.long sys_kexec_load
-	.long sys_getcpu
-	.long sys_epoll_pwait		/* 315 */
-	.long sys_utimensat
-	.long sys_signalfd
-	.long sys_timerfd_create
-	.long sys_eventfd
-	.long sys_fallocate		/* 320 */
-	.long sys_timerfd_settime
-	.long sys_timerfd_gettime
-	.long sys_signalfd4
-	.long sys_eventfd2
-	.long sys_epoll_create1		/* 325 */
-	.long sys_dup3
-	.long sys_pipe2
-	.long sys_inotify_init1
-	.long sys_preadv
-	.long sys_pwritev		/* 330 */
-	.long sys_rt_tgsigqueueinfo
-	.long sys_perf_event_open
-	.long sys_get_thread_area
-	.long sys_set_thread_area
-	.long sys_atomic_cmpxchg_32	/* 335 */
-	.long sys_atomic_barrier
-	.long sys_fanotify_init
-	.long sys_fanotify_mark
-	.long sys_prlimit64
-
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index ef54128baa0..27622b3273c 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -134,7 +134,7 @@
  *	Thanks to a small helping routine enabling the mmu got quite simple
  * and there is only one way left. mmu_engage makes a complete a new mapping
  * that only includes the absolute necessary to be able to jump to the final
- * postion and to restore the original mapping.
+ * position and to restore the original mapping.
  * As this code doesn't need a transparent translation register anymore this
  * means all registers are free to be used by machines that needs them for
  * other purposes.
@@ -969,7 +969,7 @@ L(mmu_init_amiga):
 	is_not_040_or_060(1f)
 
 	/*
-	 * 040: Map the 16Meg range physical 0x0 upto logical 0x8000.0000
+	 * 040: Map the 16Meg range physical 0x0 up to logical 0x8000.0000
 	 */
 	mmu_map		#0x80000000,#0,#0x01000000,#_PAGE_NOCACHE_S
 	/*
@@ -982,7 +982,7 @@ L(mmu_init_amiga):
 
 1:
 	/*
-	 * 030:	Map the 32Meg range physical 0x0 upto logical 0x8000.0000
+	 * 030:	Map the 32Meg range physical 0x0 up to logical 0x8000.0000
 	 */
 	mmu_map		#0x80000000,#0,#0x02000000,#_PAGE_NOCACHE030
 	mmu_map_tt	#1,#0x40000000,#0x20000000,#_PAGE_NOCACHE030
@@ -1074,7 +1074,7 @@ L(notq40):
 	is_040(1f)
 
 	/*
-	 * 030: Map the 32Meg range physical 0x0 upto logical 0xf000.0000
+	 * 030: Map the 32Meg range physical 0x0 up to logical 0xf000.0000
 	 */
 	mmu_map	#0xf0000000,#0,#0x02000000,#_PAGE_NOCACHE030
 
@@ -1082,7 +1082,7 @@ L(notq40):
 
 1:
 	/*
-	 * 040: Map the 16Meg range physical 0x0 upto logical 0xf000.0000
+	 * 040: Map the 16Meg range physical 0x0 up to logical 0xf000.0000
 	 */
 	mmu_map #0xf0000000,#0,#0x01000000,#_PAGE_NOCACHE_S
 
@@ -3078,7 +3078,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 	/*
 	 * If the loader gave us a board type then we can use that to
 	 * select an appropriate output routine; otherwise we just use
-	 * the Bug code.  If we haev to use the Bug that means the Bug
+	 * the Bug code.  If we have to use the Bug that means the Bug
 	 * workspace has to be valid, which means the Bug has to use
 	 * the SRAM, which is non-standard.
 	 */
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index 79b1ed198c0..5909e392cb1 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/m68knommu/kernel/syscalltable.S
- *
  *  Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
  *
  *  Based on older entry.S files, the following copyrights apply:
@@ -9,171 +7,176 @@
  *                      Kenneth Albanowski <kjahds@kjahds.com>,
  *  Copyright (C) 2000  Lineo Inc. (www.lineo.com) 
  *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ *  Linux/m68k support by Hamish Macdonald
  */
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
-#include <asm/unistd.h>
 
-.text
+#ifndef CONFIG_MMU
+#define sys_mmap2		sys_mmap_pgoff
+#endif
+
+.section .rodata
 ALIGN
 ENTRY(sys_call_table)
-	.long sys_restart_syscall	/* 0  -  old "setup()" system call */
+	.long sys_restart_syscall	/* 0 - old "setup()" system call, used for restarting */
 	.long sys_exit
 	.long sys_fork
 	.long sys_read
 	.long sys_write
-	.long sys_open		/* 5 */
+	.long sys_open			/* 5 */
 	.long sys_close
 	.long sys_waitpid
 	.long sys_creat
 	.long sys_link
-	.long sys_unlink	/* 10 */
+	.long sys_unlink		/* 10 */
 	.long sys_execve
 	.long sys_chdir
 	.long sys_time
 	.long sys_mknod
-	.long sys_chmod		/* 15 */
+	.long sys_chmod			/* 15 */
 	.long sys_chown16
-	.long sys_ni_syscall	/* old break syscall holder */
+	.long sys_ni_syscall		/* old break syscall holder */
 	.long sys_stat
 	.long sys_lseek
-	.long sys_getpid	/* 20 */
+	.long sys_getpid		/* 20 */
 	.long sys_mount
 	.long sys_oldumount
 	.long sys_setuid16
 	.long sys_getuid16
-	.long sys_stime		/* 25 */
+	.long sys_stime			/* 25 */
 	.long sys_ptrace
 	.long sys_alarm
 	.long sys_fstat
 	.long sys_pause
-	.long sys_utime		/* 30 */
-	.long sys_ni_syscall	/* old stty syscall holder */
-	.long sys_ni_syscall	/* old gtty syscall holder */
+	.long sys_utime			/* 30 */
+	.long sys_ni_syscall		/* old stty syscall holder */
+	.long sys_ni_syscall		/* old gtty syscall holder */
 	.long sys_access
 	.long sys_nice
-	.long sys_ni_syscall	/* 35 */ /* old ftime syscall holder */
+	.long sys_ni_syscall		/* 35 - old ftime syscall holder */
 	.long sys_sync
 	.long sys_kill
 	.long sys_rename
 	.long sys_mkdir
-	.long sys_rmdir		/* 40 */
+	.long sys_rmdir			/* 40 */
 	.long sys_dup
 	.long sys_pipe
 	.long sys_times
-	.long sys_ni_syscall	/* old prof syscall holder */
-	.long sys_brk		/* 45 */
+	.long sys_ni_syscall		/* old prof syscall holder */
+	.long sys_brk			/* 45 */
 	.long sys_setgid16
 	.long sys_getgid16
 	.long sys_signal
 	.long sys_geteuid16
-	.long sys_getegid16	/* 50 */
+	.long sys_getegid16		/* 50 */
 	.long sys_acct
-	.long sys_umount	/* recycled never used phys() */
-	.long sys_ni_syscall	/* old lock syscall holder */
+	.long sys_umount		/* recycled never used phys() */
+	.long sys_ni_syscall		/* old lock syscall holder */
 	.long sys_ioctl
-	.long sys_fcntl		/* 55 */
-	.long sys_ni_syscall	/* old mpx syscall holder */
+	.long sys_fcntl			/* 55 */
+	.long sys_ni_syscall		/* old mpx syscall holder */
 	.long sys_setpgid
-	.long sys_ni_syscall	/* old ulimit syscall holder */
+	.long sys_ni_syscall		/* old ulimit syscall holder */
 	.long sys_ni_syscall
-	.long sys_umask		/* 60 */
+	.long sys_umask			/* 60 */
 	.long sys_chroot
 	.long sys_ustat
 	.long sys_dup2
 	.long sys_getppid
-	.long sys_getpgrp	/* 65 */
+	.long sys_getpgrp		/* 65 */
 	.long sys_setsid
 	.long sys_sigaction
 	.long sys_sgetmask
 	.long sys_ssetmask
-	.long sys_setreuid16	/* 70 */
+	.long sys_setreuid16		/* 70 */
 	.long sys_setregid16
 	.long sys_sigsuspend
 	.long sys_sigpending
 	.long sys_sethostname
-	.long sys_setrlimit	/* 75 */
+	.long sys_setrlimit		/* 75 */
 	.long sys_old_getrlimit
 	.long sys_getrusage
 	.long sys_gettimeofday
 	.long sys_settimeofday
-	.long sys_getgroups16	/* 80 */
+	.long sys_getgroups16		/* 80 */
 	.long sys_setgroups16
 	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
-	.long sys_readlink	/* 85 */
+	.long sys_readlink		/* 85 */
 	.long sys_uselib
-	.long sys_ni_syscall	/* sys_swapon */
+	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long sys_old_mmap	/* 90 */
+	.long sys_old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
 	.long sys_fchmod
-	.long sys_fchown16	/* 95 */
+	.long sys_fchown16		/* 95 */
 	.long sys_getpriority
 	.long sys_setpriority
-	.long sys_ni_syscall	/* old profil syscall holder */
+	.long sys_ni_syscall		/* old profil syscall holder */
 	.long sys_statfs
-	.long sys_fstatfs	/* 100 */
-	.long sys_ni_syscall	/* ioperm for i386 */
+	.long sys_fstatfs		/* 100 */
+	.long sys_ni_syscall		/* ioperm for i386 */
 	.long sys_socketcall
 	.long sys_syslog
 	.long sys_setitimer
-	.long sys_getitimer	/* 105 */
+	.long sys_getitimer		/* 105 */
 	.long sys_newstat
 	.long sys_newlstat
 	.long sys_newfstat
 	.long sys_ni_syscall
-	.long sys_ni_syscall	/* iopl for i386 */ /* 110 */
+	.long sys_ni_syscall		/* 110 - iopl for i386 */
 	.long sys_vhangup
-	.long sys_ni_syscall	/* obsolete idle() syscall */
-	.long sys_ni_syscall	/* vm86old for i386 */
+	.long sys_ni_syscall		/* obsolete idle() syscall */
+	.long sys_ni_syscall		/* vm86old for i386 */
 	.long sys_wait4
-	.long sys_ni_syscall	/* 115 */ /* sys_swapoff */
+	.long sys_swapoff		/* 115 */
 	.long sys_sysinfo
 	.long sys_ipc
 	.long sys_fsync
 	.long sys_sigreturn
-	.long sys_clone		/* 120 */
+	.long sys_clone			/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
-	.long sys_cacheflush	/* modify_ldt for i386 */
+	.long sys_cacheflush		/* modify_ldt for i386 */
 	.long sys_adjtimex
-	.long sys_ni_syscall	/* 125 */ /* sys_mprotect */
+	.long sys_mprotect		/* 125 */
 	.long sys_sigprocmask
-	.long sys_ni_syscall	/* old "creat_module" */
+	.long sys_ni_syscall		/* old "create_module" */
 	.long sys_init_module
 	.long sys_delete_module
-	.long sys_ni_syscall	/* 130: old "get_kernel_syms" */
+	.long sys_ni_syscall		/* 130 - old "get_kernel_syms" */
 	.long sys_quotactl
 	.long sys_getpgid
 	.long sys_fchdir
 	.long sys_bdflush
-	.long sys_sysfs		/* 135 */
+	.long sys_sysfs			/* 135 */
 	.long sys_personality
-	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_ni_syscall		/* for afs_syscall */
 	.long sys_setfsuid16
 	.long sys_setfsgid16
-	.long sys_llseek	/* 140 */
+	.long sys_llseek		/* 140 */
 	.long sys_getdents
 	.long sys_select
 	.long sys_flock
-	.long sys_ni_syscall	/* sys_msync */
-	.long sys_readv		/* 145 */
+	.long sys_msync
+	.long sys_readv			/* 145 */
 	.long sys_writev
 	.long sys_getsid
 	.long sys_fdatasync
 	.long sys_sysctl
-	.long sys_ni_syscall	/* 150 */ /* sys_mlock */
-	.long sys_ni_syscall	/* sys_munlock */
-	.long sys_ni_syscall	/* sys_mlockall */
-	.long sys_ni_syscall	/* sys_munlockall */
+	.long sys_mlock			/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
 	.long sys_sched_setparam
-	.long sys_sched_getparam /* 155 */
+	.long sys_sched_getparam	/* 155 */
 	.long sys_sched_setscheduler
 	.long sys_sched_getscheduler
 	.long sys_sched_yield
@@ -181,124 +184,124 @@ ENTRY(sys_call_table)
 	.long sys_sched_get_priority_min  /* 160 */
 	.long sys_sched_rr_get_interval
 	.long sys_nanosleep
-	.long sys_ni_syscall	/* sys_mremap */
+	.long sys_mremap
 	.long sys_setresuid16
-	.long sys_getresuid16	/* 165 */
-	.long sys_getpagesize	/* sys_getpagesize */
-	.long sys_ni_syscall	/* old "query_module" */
+	.long sys_getresuid16		/* 165 */
+	.long sys_getpagesize
+	.long sys_ni_syscall		/* old "query_module" */
 	.long sys_poll
-	.long sys_ni_syscall	/* sys_nfsservctl */
-	.long sys_setresgid16	/* 170 */
+	.long sys_nfsservctl
+	.long sys_setresgid16		/* 170 */
 	.long sys_getresgid16
 	.long sys_prctl
 	.long sys_rt_sigreturn
 	.long sys_rt_sigaction
-	.long sys_rt_sigprocmask /* 175 */
+	.long sys_rt_sigprocmask	/* 175 */
 	.long sys_rt_sigpending
 	.long sys_rt_sigtimedwait
 	.long sys_rt_sigqueueinfo
 	.long sys_rt_sigsuspend
-	.long sys_pread64	/* 180 */
+	.long sys_pread64		/* 180 */
 	.long sys_pwrite64
 	.long sys_lchown16
 	.long sys_getcwd
 	.long sys_capget
-	.long sys_capset	/* 185 */
+	.long sys_capset		/* 185 */
 	.long sys_sigaltstack
 	.long sys_sendfile
-	.long sys_ni_syscall	/* streams1 */
-	.long sys_ni_syscall	/* streams2 */
-	.long sys_vfork		/* 190 */
+	.long sys_ni_syscall		/* streams1 */
+	.long sys_ni_syscall		/* streams2 */
+	.long sys_vfork			/* 190 */
 	.long sys_getrlimit
-	.long sys_mmap_pgoff
+	.long sys_mmap2
 	.long sys_truncate64
 	.long sys_ftruncate64
-	.long sys_stat64	/* 195 */
+	.long sys_stat64		/* 195 */
 	.long sys_lstat64
 	.long sys_fstat64
 	.long sys_chown
 	.long sys_getuid
-	.long sys_getgid	/* 200 */
+	.long sys_getgid		/* 200 */
 	.long sys_geteuid
 	.long sys_getegid
 	.long sys_setreuid
 	.long sys_setregid
-	.long sys_getgroups	/* 205 */
+	.long sys_getgroups		/* 205 */
 	.long sys_setgroups
 	.long sys_fchown
 	.long sys_setresuid
 	.long sys_getresuid
-	.long sys_setresgid	/* 210 */
+	.long sys_setresgid		/* 210 */
 	.long sys_getresgid
 	.long sys_lchown
 	.long sys_setuid
 	.long sys_setgid
-	.long sys_setfsuid	/* 215 */
+	.long sys_setfsuid		/* 215 */
 	.long sys_setfsgid
 	.long sys_pivot_root
 	.long sys_ni_syscall
 	.long sys_ni_syscall
-	.long sys_getdents64	/* 220 */
+	.long sys_getdents64		/* 220 */
 	.long sys_gettid
 	.long sys_tkill
 	.long sys_setxattr
 	.long sys_lsetxattr
-	.long sys_fsetxattr	/* 225 */
+	.long sys_fsetxattr		/* 225 */
 	.long sys_getxattr
 	.long sys_lgetxattr
 	.long sys_fgetxattr
 	.long sys_listxattr
-	.long sys_llistxattr	/* 230 */
+	.long sys_llistxattr		/* 230 */
 	.long sys_flistxattr
 	.long sys_removexattr
 	.long sys_lremovexattr
 	.long sys_fremovexattr
-	.long sys_futex		/* 235 */
+	.long sys_futex			/* 235 */
 	.long sys_sendfile64
-	.long sys_ni_syscall	/* sys_mincore */
-	.long sys_ni_syscall	/* sys_madvise */
+	.long sys_mincore
+	.long sys_madvise
 	.long sys_fcntl64
-	.long sys_readahead	/* 240 */
+	.long sys_readahead		/* 240 */
 	.long sys_io_setup
 	.long sys_io_destroy
 	.long sys_io_getevents
 	.long sys_io_submit
-	.long sys_io_cancel	/* 245 */
+	.long sys_io_cancel		/* 245 */
 	.long sys_fadvise64
 	.long sys_exit_group
 	.long sys_lookup_dcookie
 	.long sys_epoll_create
-	.long sys_epoll_ctl	/* 250 */
+	.long sys_epoll_ctl		/* 250 */
 	.long sys_epoll_wait
-	.long sys_ni_syscall	/* sys_remap_file_pages */
+	.long sys_remap_file_pages
 	.long sys_set_tid_address
 	.long sys_timer_create
-	.long sys_timer_settime	/* 255 */
+	.long sys_timer_settime		/* 255 */
 	.long sys_timer_gettime
 	.long sys_timer_getoverrun
 	.long sys_timer_delete
 	.long sys_clock_settime
-	.long sys_clock_gettime	/* 260 */
+	.long sys_clock_gettime		/* 260 */
 	.long sys_clock_getres
 	.long sys_clock_nanosleep
 	.long sys_statfs64
 	.long sys_fstatfs64
-	.long sys_tgkill	/* 265 */
+	.long sys_tgkill		/* 265 */
 	.long sys_utimes
 	.long sys_fadvise64_64
-	.long sys_mbind	
+	.long sys_mbind
 	.long sys_get_mempolicy
-	.long sys_set_mempolicy	/* 270 */
+	.long sys_set_mempolicy		/* 270 */
 	.long sys_mq_open
 	.long sys_mq_unlink
 	.long sys_mq_timedsend
 	.long sys_mq_timedreceive
-	.long sys_mq_notify	/* 275 */
+	.long sys_mq_notify		/* 275 */
 	.long sys_mq_getsetattr
 	.long sys_waitid
-	.long sys_ni_syscall	/* for sys_vserver */
+	.long sys_ni_syscall		/* for sys_vserver */
 	.long sys_add_key
-	.long sys_request_key	/* 280 */
+	.long sys_request_key		/* 280 */
 	.long sys_keyctl
 	.long sys_ioprio_set
 	.long sys_ioprio_get
@@ -319,8 +322,8 @@ ENTRY(sys_call_table)
 	.long sys_readlinkat
 	.long sys_fchmodat
 	.long sys_faccessat		/* 300 */
-	.long sys_ni_syscall		/* Reserved for pselect6 */
-	.long sys_ni_syscall		/* Reserved for ppoll */
+	.long sys_pselect6
+	.long sys_ppoll
 	.long sys_unshare
 	.long sys_set_robust_list
 	.long sys_get_robust_list	/* 305 */
@@ -358,8 +361,8 @@ ENTRY(sys_call_table)
 	.long sys_fanotify_init
 	.long sys_fanotify_mark
 	.long sys_prlimit64
-
-	.rept NR_syscalls-(.-sys_call_table)/4
-		.long sys_ni_syscall
-	.endr
+	.long sys_name_to_handle_at	/* 340 */
+	.long sys_open_by_handle_at
+	.long sys_clock_adjtime
+	.long sys_syncfs
 
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 878be5f38ca..d0993594f55 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -25,6 +25,8 @@ SECTIONS
 
   EXCEPTION_TABLE(16)
 
+  _sdata = .;			/* Start of data section */
+
   RODATA
 
   RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 1ad6b7ad2c1..8080469ee6c 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -25,6 +25,7 @@ SECTIONS
   _etext = .;			/* End of text section */
 
   EXCEPTION_TABLE(16) :data
+  _sdata = .;			/* Start of rw data section */
   RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) :data
   /* End of data goes *here* so that freeing init code works properly. */
   _edata = .;
diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux.lds_no.S
index 47e15ebfd89..f4d715cdca0 100644
--- a/arch/m68k/kernel/vmlinux.lds_no.S
+++ b/arch/m68k/kernel/vmlinux.lds_no.S
@@ -3,7 +3,7 @@
  *
  *	(C) Copyright 2002-2006, Greg Ungerer <gerg@snapgear.com>
  *
- *	This linker script is equiped to build either ROM loaded or RAM
+ *	This linker script is equipped to build either ROM loaded or RAM
  *	run kernels.
  */
 
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 02b7a03e422..8b3db1c587f 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -300,6 +300,8 @@ void __init paging_init(void)
 		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
 		free_area_init_node(i, zones_size,
 				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
+		if (node_present_pages(i))
+			node_set_state(i, N_NORMAL_MEMORY);
 	}
 }
 
diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c
index 418a76feb1e..71f4436ec80 100644
--- a/arch/m68k/platform/523x/config.c
+++ b/arch/m68k/platform/523x/config.c
@@ -3,7 +3,7 @@
 /*
  *	linux/arch/m68knommu/platform/523x/config.c
  *
- *	Sub-architcture dependant initialization code for the Freescale
+ *	Sub-architcture dependent initialization code for the Freescale
  *	523x CPUs.
  *
  *	Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
diff --git a/arch/m68k/platform/5272/intc.c b/arch/m68k/platform/5272/intc.c
index 43e6e96f087..7e715dfe281 100644
--- a/arch/m68k/platform/5272/intc.c
+++ b/arch/m68k/platform/5272/intc.c
@@ -33,7 +33,7 @@
  *
  * Note that the external interrupts are edge triggered (unlike the
  * internal interrupt sources which are level triggered). Which means
- * they also need acknowledgeing via acknowledge bits.
+ * they also need acknowledging via acknowledge bits.
  */
 struct irqmap {
 	unsigned char	icr;
diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c
index fa359593b61..3ebc769cefd 100644
--- a/arch/m68k/platform/527x/config.c
+++ b/arch/m68k/platform/527x/config.c
@@ -3,7 +3,7 @@
 /*
  *	linux/arch/m68knommu/platform/527x/config.c
  *
- *	Sub-architcture dependant initialization code for the Freescale
+ *	Sub-architcture dependent initialization code for the Freescale
  *	5270/5271 CPUs.
  *
  *	Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c
index ac39fc66121..7abe77a2f3e 100644
--- a/arch/m68k/platform/528x/config.c
+++ b/arch/m68k/platform/528x/config.c
@@ -3,7 +3,7 @@
 /*
  *	linux/arch/m68knommu/platform/528x/config.c
  *
- *	Sub-architcture dependant initialization code for the Freescale
+ *	Sub-architcture dependent initialization code for the Freescale
  *	5280, 5281 and 5282 CPUs.
  *
  *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
diff --git a/arch/m68k/platform/coldfire/cache.c b/arch/m68k/platform/coldfire/cache.c
index 235d3c4f4f0..71beeaf0c5c 100644
--- a/arch/m68k/platform/coldfire/cache.c
+++ b/arch/m68k/platform/coldfire/cache.c
@@ -1,7 +1,7 @@
 /***************************************************************************/
 
 /*
- *	cache.c -- general ColdFire Cache maintainence code
+ *	cache.c -- general ColdFire Cache maintenance code
  *
  *	Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
  */
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index 5837cf080b6..eab63f09965 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -163,7 +163,7 @@ Lsignal_return:
 
 /*
  * This is the generic interrupt handler (for all hardware interrupt
- * sources). Calls upto high level code to do all the work.
+ * sources). Calls up to high level code to do all the work.
  */
 ENTRY(inthandler)
 	SAVE_ALL
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
index 129bff4956b..6ae91a49918 100644
--- a/arch/m68k/platform/coldfire/head.S
+++ b/arch/m68k/platform/coldfire/head.S
@@ -20,7 +20,7 @@
 
 /*
  *	If we don't have a fixed memory size, then lets build in code
- *	to auto detect the DRAM size. Obviously this is the prefered
+ *	to auto detect the DRAM size. Obviously this is the preferred
  *	method, and should work for most boards. It won't work for those
  *	that do not have their RAM starting at address 0, and it only
  *	works on SDRAM (not boards fitted with SRAM).
diff --git a/arch/m68k/platform/coldfire/intc.c b/arch/m68k/platform/coldfire/intc.c
index c28a6ed6cb2..0bbb414856e 100644
--- a/arch/m68k/platform/coldfire/intc.c
+++ b/arch/m68k/platform/coldfire/intc.c
@@ -37,7 +37,7 @@ unsigned char mcf_irq2imr[NR_IRQS];
 /*
  * In the early version 2 core ColdFire parts the IMR register was 16 bits
  * in size. Version 3 (and later version 2) core parts have a 32 bit
- * sized IMR register. Provide some size independant methods to access the
+ * sized IMR register. Provide some size independent methods to access the
  * IMR register.
  */
 #ifdef MCFSIM_IMR_IS_16BITS
diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
index 0a1b937c3e1..6a85daf9a7f 100644
--- a/arch/m68k/platform/coldfire/sltimers.c
+++ b/arch/m68k/platform/coldfire/sltimers.c
@@ -106,7 +106,7 @@ static cycle_t mcfslt_read_clk(struct clocksource *cs)
 	cycles = mcfslt_cnt;
 	local_irq_restore(flags);
 
-	/* substract because slice timers count down */
+	/* subtract because slice timers count down */
 	return cycles - scnt;
 }
 
diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README
index f877b724979..b26d5f55e91 100644
--- a/arch/m68k/q40/README
+++ b/arch/m68k/q40/README
@@ -89,7 +89,7 @@ The main interrupt register IIRQ_REG will indicate whether an IRQ was internal
 or from some ISA devices, EIRQ_REG can distinguish up to 8 ISA IRQs.
 
 The Q40 custom chip is programmable to provide 2 periodic timers:
-	- 50 or 200 Hz - level 2, !!THIS CANT BE DISABLED!!
+	- 50 or 200 Hz - level 2, !!THIS CAN'T BE DISABLED!!
 	- 10 or 20 KHz - level 4, used for dma-sound
 
 Linux uses the 200 Hz interrupt for timer and beep by default.
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index c49c326e7af..eccdefe70d4 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -6,7 +6,6 @@ config MICROBLAZE
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
-	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB
@@ -17,7 +16,6 @@ config MICROBLAZE
 	select OF_EARLY_FLATTREE
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config SWAP
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 6f432e6df9a..b23c40eb7a5 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -18,7 +18,7 @@ export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
 # rather than bools y/n
 
 # Work out HW multipler support. This is tricky.
-# 1. Spartan2 has no HW multiplers.
+# 1. Spartan2 has no HW multipliers.
 # 2. MicroBlaze v3.x always uses them, except in Spartan 2
 # 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
 ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index eae32220f44..8cdac14b55b 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -70,7 +70,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
 
 /*
  * read (readb, readw, readl, readq) and write (writeb, writew,
- * writel, writeq) accessors are for PCI and thus littel endian.
+ * writel, writeq) accessors are for PCI and thus little endian.
  * Linux 2.4 for Microblaze had this wrong.
  */
 static inline unsigned char readb(const volatile void __iomem *addr)
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 10717669e0c..746df91e579 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -76,7 +76,7 @@ struct pci_controller {
 	 * Used for variants of PCI indirect handling and possible quirks:
 	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
 	 *  EXT_REG - provides access to PCI-e extended registers
-	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *  SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
 	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
 	 *   to determine which bus number to match on when generating type0
 	 *   config cycles
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index 2232ff942ba..ba65cf47254 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -158,7 +158,7 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
 extern void pcibios_setup_bus_devices(struct pci_bus *bus);
 extern void pcibios_setup_bus_self(struct pci_bus *bus);
 
-/* This part of code was originaly in xilinx-pci.h */
+/* This part of code was originally in xilinx-pci.h */
 #ifdef CONFIG_PCI_XILINX
 extern void __init xilinx_pci_init(void);
 #else
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index d770b00ec6b..30edd61a6b8 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -386,8 +386,12 @@
 #define __NR_fanotify_init	368
 #define __NR_fanotify_mark	369
 #define __NR_prlimit64		370
+#define __NR_name_to_handle_at	371
+#define __NR_open_by_handle_at	372
+#define __NR_clock_adjtime	373
+#define __NR_syncfs		374
 
-#define __NR_syscalls		371
+#define __NR_syscalls		375
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index f0cb5c26c81..494b63b72dd 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -10,6 +10,7 @@ CFLAGS_REMOVE_early_printk.o = -pg
 CFLAGS_REMOVE_selfmod.o = -pg
 CFLAGS_REMOVE_heartbeat.o = -pg
 CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_process.o = -pg
 endif
 
 extra-y := head.o vmlinux.lds
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index cf0afd90a2c..4b7d8a3f4ae 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -129,7 +129,7 @@ do {									\
  * to use for simple wdc or wic.
  *
  * start address is cache aligned
- * end address is not aligned, if end is aligned then I have to substract
+ * end address is not aligned, if end is aligned then I have to subtract
  * cacheline length because I can't flush/invalidate the next cacheline.
  * If is not, I align it because I will flush/invalidate whole line.
  */
diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
index 515feb40455..357d56abe24 100644
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@@ -51,6 +51,9 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 			: "r" (parent), "r" (return_hooker)
 	);
 
+	flush_dcache_range((u32)parent, (u32)parent + 4);
+	flush_icache_range((u32)parent, (u32)parent + 4);
+
 	if (unlikely(faulted)) {
 		ftrace_graph_stop();
 		WARN_ON(1);
@@ -95,6 +98,9 @@ static int ftrace_modify_code(unsigned long addr, unsigned int value)
 	if (unlikely(faulted))
 		return -EFAULT;
 
+	flush_dcache_range(addr, addr + 4);
+	flush_icache_range(addr, addr + 4);
+
 	return 0;
 }
 
@@ -195,8 +201,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	ret += ftrace_modify_code((unsigned long)&ftrace_caller,
 				  MICROBLAZE_NOP);
 
-	/* All changes are done - lets do caches consistent */
-	flush_icache();
 	return ret;
 }
 
@@ -210,7 +214,6 @@ int ftrace_enable_ftrace_graph_caller(void)
 
 	old_jump = *(unsigned int *)ip; /* save jump over instruction */
 	ret = ftrace_modify_code(ip, MICROBLAZE_NOP);
-	flush_icache();
 
 	pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump);
 	return ret;
@@ -222,7 +225,6 @@ int ftrace_disable_ftrace_graph_caller(void)
 	unsigned long ip = (unsigned long)(&ftrace_call_graph);
 
 	ret = ftrace_modify_code(ip, old_jump);
-	flush_icache();
 
 	pr_debug("%s\n", __func__);
 	return ret;
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 5ba7e162833..c88f066f41b 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -158,11 +158,11 @@ void __init init_IRQ(void)
 	for (i = 0; i < nr_irq; ++i) {
 		if (intr_type & (0x00000001 << i)) {
 			irq_set_chip_and_handler_name(i, &intc_dev,
-				handle_edge_irq, intc_dev.name);
+				handle_edge_irq, "edge");
 			irq_clear_status_flags(i, IRQ_LEVEL);
 		} else {
 			irq_set_chip_and_handler_name(i, &intc_dev,
-				handle_level_irq, intc_dev.name);
+				handle_level_irq, "level");
 			irq_set_status_flags(i, IRQ_LEVEL);
 		}
 	}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index e88a930fd1e..85cea81d1ca 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -375,3 +375,7 @@ ENTRY(sys_call_table)
 	.long sys_fanotify_init
 	.long sys_fanotify_mark
 	.long sys_prlimit64	/* 370 */
+	.long sys_name_to_handle_at
+	.long sys_open_by_handle_at
+	.long sys_clock_adjtime
+	.long sys_syncfs
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index d8a214f11ac..e5550ce4e0e 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -217,16 +217,12 @@ static struct clocksource clocksource_microblaze = {
 	.rating		= 300,
 	.read		= microblaze_read,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 8, /* I can shift it */
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static int __init microblaze_clocksource_init(void)
 {
-	clocksource_microblaze.mult =
-			clocksource_hz2mult(timer_clock_freq,
-						clocksource_microblaze.shift);
-	if (clocksource_register(&clocksource_microblaze))
+	if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
 		panic("failed to register clocksource");
 
 	/* stop timer1 */
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index f1fcbff3da2..10c320aa908 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,6 +2,12 @@
 # Makefile
 #
 
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ashldi3.o = -pg
+CFLAGS_REMOVE_ashrdi3.o = -pg
+CFLAGS_REMOVE_lshrdi3.o = -pg
+endif
+
 lib-y :=  memset.o
 
 ifeq ($(CONFIG_OPT_LIB_ASM),y)
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index cc495d7d99c..52746e718df 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -63,8 +63,8 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
 	if (likely(c >= 4)) {
 		unsigned  value, buf_hold;
 
-		/* Align the dstination to a word boundry. */
-		/* This is done in an endian independant manner. */
+		/* Align the destination to a word boundary. */
+		/* This is done in an endian independent manner. */
 		switch ((unsigned long)dst & 3) {
 		case 1:
 			*dst++ = *src++;
@@ -80,7 +80,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
 		i_dst = (void *)dst;
 
 		/* Choose a copy scheme based on the source */
-		/* alignment relative to dstination. */
+		/* alignment relative to destination. */
 		switch ((unsigned long)src & 3) {
 		case 0x0:	/* Both byte offsets are aligned */
 			i_src  = (const void *)src;
@@ -173,7 +173,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
 	}
 
 	/* Finish off any remaining bytes */
-	/* simple fast copy, ... unless a cache boundry is crossed */
+	/* simple fast copy, ... unless a cache boundary is crossed */
 	switch (c) {
 	case 3:
 		*dst++ = *src++;
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
index 810fd68775e..2146c3752a8 100644
--- a/arch/microblaze/lib/memmove.c
+++ b/arch/microblaze/lib/memmove.c
@@ -83,8 +83,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
 	if (c >= 4) {
 		unsigned  value, buf_hold;
 
-		/* Align the destination to a word boundry. */
-		/* This is done in an endian independant manner. */
+		/* Align the destination to a word boundary. */
+		/* This is done in an endian independent manner. */
 
 		switch ((unsigned long)dst & 3) {
 		case 3:
@@ -193,7 +193,7 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
 		dst = (void *)i_dst;
 	}
 
-	/* simple fast copy, ... unless a cache boundry is crossed */
+	/* simple fast copy, ... unless a cache boundary is crossed */
 	/* Finish off any remaining bytes */
 	switch (c) {
 	case 4:
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 834565d1607..ddf67939576 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -64,7 +64,7 @@ void *memset(void *v_src, int c, __kernel_size_t n)
 
 	if (likely(n >= 4)) {
 		/* Align the destination to a word boundary */
-		/* This is done in an endian independant manner */
+		/* This is done in an endian independent manner */
 		switch ((unsigned) src & 3) {
 		case 1:
 			*src++ = c;
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
index 25f18f017f2..4196eb6bd76 100644
--- a/arch/microblaze/pci/indirect_pci.c
+++ b/arch/microblaze/pci/indirect_pci.c
@@ -108,7 +108,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
 			 (devfn << 8) | reg | cfg_type));
 
-	/* surpress setting of PCI_PRIMARY_BUS */
+	/* suppress setting of PCI_PRIMARY_BUS */
 	if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
 		if ((offset == PCI_PRIMARY_BUS) &&
 			(bus->number == hose->first_busno))
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
index 5d86fc19029..25a6f019e94 100644
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -29,7 +29,7 @@ config KERNEL_BASE_ADDR
 	  BASE Address for kernel
 
 config XILINX_MICROBLAZE0_FAMILY
-	string "Targetted FPGA family"
+	string "Targeted FPGA family"
 	default "virtex5"
 
 config XILINX_MICROBLAZE0_USE_MSR_INSTR
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 7ff9b549204..aef6c917b45 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@ platforms += dec
 platforms += emma
 platforms += jazz
 platforms += jz4740
+platforms += lantiq
 platforms += lasat
 platforms += loongson
 platforms += mipssim
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 83aa5fb8e8f..cef1a854487 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -212,6 +212,24 @@ config MACH_JZ4740
 	select HAVE_PWM
 	select HAVE_CLK
 
+config LANTIQ
+	bool "Lantiq based platforms"
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_HAS_EARLY_PRINTK
+	select ARCH_REQUIRE_GPIOLIB
+	select SWAP_IO_SPACE
+	select BOOT_RAW
+	select HAVE_CLK
+	select MIPS_MACHINE
+
 config LASAT
 	bool "LASAT Networks platforms"
 	select CEVT_R4K
@@ -736,6 +754,33 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 		Hikari
 	  Say Y here for most Octeon reference boards.
 
+config NLM_XLR_BOARD
+	bool "Netlogic XLR/XLS based systems"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select NLM_COMMON
+	select NLM_XLR
+	select SYS_HAS_CPU_XLR
+	select SYS_SUPPORTS_SMP
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select 64BIT_PHYS_ADDR
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select DMA_COHERENT
+	select NR_CPUS_DEFAULT_32
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select ZONE_DMA if 64BIT
+	select SYNC_R4K
+	select SYS_HAS_EARLY_PRINTK
+	help
+	  Support for systems based on Netlogic XLR and XLS processors.
+	  Say Y here if you have a XLR or XLS based board.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -743,6 +788,7 @@ source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
+source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/powertv/Kconfig"
@@ -752,6 +798,7 @@ source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/cavium-octeon/Kconfig"
 source "arch/mips/loongson/Kconfig"
+source "arch/mips/netlogic/Kconfig"
 
 endmenu
 
@@ -997,9 +1044,6 @@ config IRQ_GT641XX
 config IRQ_GIC
 	bool
 
-config IRQ_CPU_OCTEON
-	bool
-
 config MIPS_BOARDS_GEN
 	bool
 
@@ -1135,7 +1179,7 @@ config CPU_LOONGSON2E
 	  The Loongson 2E processor implements the MIPS III instruction set
 	  with many extensions.
 
-	  It has an internal FPGA northbridge, which is compatiable to
+	  It has an internal FPGA northbridge, which is compatible to
 	  bonito64.
 
 config CPU_LOONGSON2F
@@ -1359,8 +1403,6 @@ config CPU_SB1
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
 	depends on SYS_HAS_CPU_CAVIUM_OCTEON
-	select IRQ_CPU
-	select IRQ_CPU_OCTEON
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_SMP
@@ -1425,6 +1467,17 @@ config CPU_BMIPS5000
 	help
 	  Broadcom BMIPS5000 processors.
 
+config CPU_XLR
+	bool "Netlogic XLR SoC"
+	depends on SYS_HAS_CPU_XLR
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_SUPPORTS_HUGEPAGES
+	help
+	  Netlogic Microsystems XLR/XLS processors.
 endchoice
 
 if CPU_LOONGSON2F
@@ -1555,6 +1608,9 @@ config SYS_HAS_CPU_BMIPS4380
 config SYS_HAS_CPU_BMIPS5000
 	bool
 
+config SYS_HAS_CPU_XLR
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -2339,6 +2395,7 @@ config MMU
 
 config I8253
 	bool
+	select CLKSRC_I8253
 	select MIPS_EXTERNAL_TIMER
 
 config ZONE_DMA32
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ac1d5b611a2..884819cd060 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -101,7 +101,7 @@ cflags-y += -ffreestanding
 # carefully avoid to add it redundantly because gcc 3.3/3.4 complains
 # when fed the toolchain default!
 #
-# Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of
+# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of
 # 2006-10-10 don't properly change the predefined symbols if -EB / -EL
 # are used, so we kludge that here.  A bug has been filed at
 # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
@@ -191,6 +191,18 @@ endif
 #
 include $(srctree)/arch/mips/Kbuild.platforms
 
+#
+# NETLOGIC SOC Common (common)
+#
+cflags-$(CONFIG_NLM_COMMON)		+= -I$(srctree)/arch/mips/include/asm/mach-netlogic
+cflags-$(CONFIG_NLM_COMMON)		+= -I$(srctree)/arch/mips/include/asm/netlogic
+
+#
+# NETLOGIC XLR/XLS SoC, Simulator and boards
+#
+core-$(CONFIG_NLM_XLR)      		+= arch/mips/netlogic/xlr/
+load-$(CONFIG_NLM_XLR_BOARD)		+= 0xffffffff84000000
+
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 
@@ -314,5 +326,5 @@ define archhelp
 	echo '  vmlinuz.bin          - Raw binary zboot image'
 	echo '  vmlinuz.srec         - SREC zboot image'
 	echo
-	echo '  These will be default as apropriate for a configured platform.'
+	echo '  These will be default as appropriate for a configured platform.'
 endef
diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index af0fe41055a..f38298a8b98 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -75,7 +75,7 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
  * counter, if it exists.  If we don't have an accurate processor
  * speed, all of the peripherals that derive their clocks based on
  * this advertised speed will introduce error and sometimes not work
- * properly.  This function is futher convoluted to still allow configurations
+ * properly.  This function is further convoluted to still allow configurations
  * to do that in case they have really, really old silicon with a
  * write-only PLL register.			-- Dan
  */
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index ca0506a8585..3a5abb54d50 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -36,7 +36,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 
@@ -58,7 +58,8 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
 /* I couldn't find a macro that did this... */
 #define ALIGN_ADDR(x, a)	((((u32)(x)) + (a-1)) & ~(a-1))
 
-static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static dbdma_global_t *dbdma_gptr =
+			(dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
 static int dbdma_initialized;
 
 static dbdev_tab_t dbdev_tab[] = {
@@ -299,7 +300,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	if (ctp != NULL) {
 		memset(ctp, 0, sizeof(chan_tab_t));
 		ctp->chan_index = chan = i;
-		dcp = DDMA_CHANNEL_BASE;
+		dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
 		dcp += (0x0100 * chan);
 		ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
 		cp = (au1x_dma_chan_t *)dcp;
@@ -958,105 +959,75 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 }
 
 
-struct alchemy_dbdma_sysdev {
-	struct sys_device sysdev;
-	u32 pm_regs[NUM_DBDMA_CHANS + 1][6];
-};
+static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
 
-static int alchemy_dbdma_suspend(struct sys_device *dev,
-				 pm_message_t state)
+static int alchemy_dbdma_suspend(void)
 {
-	struct alchemy_dbdma_sysdev *sdev =
-		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
-	u32 addr;
+	void __iomem *addr;
 
-	addr = DDMA_GLOBAL_BASE;
-	sdev->pm_regs[0][0] = au_readl(addr + 0x00);
-	sdev->pm_regs[0][1] = au_readl(addr + 0x04);
-	sdev->pm_regs[0][2] = au_readl(addr + 0x08);
-	sdev->pm_regs[0][3] = au_readl(addr + 0x0c);
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
+	alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
+	alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
+	alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
 
 	/* save channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		sdev->pm_regs[i][0] = au_readl(addr + 0x00);
-		sdev->pm_regs[i][1] = au_readl(addr + 0x04);
-		sdev->pm_regs[i][2] = au_readl(addr + 0x08);
-		sdev->pm_regs[i][3] = au_readl(addr + 0x0c);
-		sdev->pm_regs[i][4] = au_readl(addr + 0x10);
-		sdev->pm_regs[i][5] = au_readl(addr + 0x14);
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+	for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+		alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
+		alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
+		alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
+		alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
+		alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
+		alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
 
 		/* halt channel */
-		au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00);
-		au_sync();
-		while (!(au_readl(addr + 0x14) & 1))
-			au_sync();
+		__raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
+		wmb();
+		while (!(__raw_readl(addr + 0x14) & 1))
+			wmb();
 
 		addr += 0x100;	/* next channel base */
 	}
 	/* disable channel interrupts */
-	au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
-	au_sync();
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	__raw_writel(0, addr + 0x0c);
+	wmb();
 
 	return 0;
 }
 
-static int alchemy_dbdma_resume(struct sys_device *dev)
+static void alchemy_dbdma_resume(void)
 {
-	struct alchemy_dbdma_sysdev *sdev =
-		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
-	u32 addr;
+	void __iomem *addr;
 
-	addr = DDMA_GLOBAL_BASE;
-	au_writel(sdev->pm_regs[0][0], addr + 0x00);
-	au_writel(sdev->pm_regs[0][1], addr + 0x04);
-	au_writel(sdev->pm_regs[0][2], addr + 0x08);
-	au_writel(sdev->pm_regs[0][3], addr + 0x0c);
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	__raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
+	__raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
+	__raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
+	__raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		au_writel(sdev->pm_regs[i][0], addr + 0x00);
-		au_writel(sdev->pm_regs[i][1], addr + 0x04);
-		au_writel(sdev->pm_regs[i][2], addr + 0x08);
-		au_writel(sdev->pm_regs[i][3], addr + 0x0c);
-		au_writel(sdev->pm_regs[i][4], addr + 0x10);
-		au_writel(sdev->pm_regs[i][5], addr + 0x14);
-		au_sync();
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+	for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+		__raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
+		__raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
+		__raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
+		__raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
+		__raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
+		__raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
+		wmb();
 		addr += 0x100;	/* next channel base */
 	}
-
-	return 0;
 }
 
-static struct sysdev_class alchemy_dbdma_sysdev_class = {
-	.name		= "dbdma",
+static struct syscore_ops alchemy_dbdma_syscore_ops = {
 	.suspend	= alchemy_dbdma_suspend,
 	.resume		= alchemy_dbdma_resume,
 };
 
-static int __init alchemy_dbdma_sysdev_init(void)
-{
-	struct alchemy_dbdma_sysdev *sdev;
-	int ret;
-
-	ret = sysdev_class_register(&alchemy_dbdma_sysdev_class);
-	if (ret)
-		return ret;
-
-	sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL);
-	if (!sdev)
-		return -ENOMEM;
-
-	sdev->sysdev.id = -1;
-	sdev->sysdev.cls = &alchemy_dbdma_sysdev_class;
-	ret = sysdev_register(&sdev->sysdev);
-	if (ret)
-		kfree(sdev);
-
-	return ret;
-}
-
 static int __init au1xxx_dbdma_init(void)
 {
 	int irq_nr, ret;
@@ -1084,11 +1055,7 @@ static int __init au1xxx_dbdma_init(void)
 	else {
 		dbdma_initialized = 1;
 		printk(KERN_INFO "Alchemy DBDMA initialized\n");
-		ret = alchemy_dbdma_sysdev_init();
-		if (ret) {
-			printk(KERN_ERR "DBDMA PM init failed\n");
-			ret = 0;
-		}
+		register_syscore_ops(&alchemy_dbdma_syscore_ops);
 	}
 
 	return ret;
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index d5278877891..347980e79a8 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -58,6 +58,9 @@
  * returned from request_dma.
  */
 
+/* DMA Channel register block spacing */
+#define DMA_CHANNEL_LEN		0x00000100
+
 DEFINE_SPINLOCK(au1000_dma_spin_lock);
 
 struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
@@ -77,22 +80,23 @@ static const struct dma_dev {
 	unsigned int fifo_addr;
 	unsigned int dma_mode;
 } dma_dev_table[DMA_NUM_DEV] = {
-	{UART0_ADDR + UART_TX, 0},
-	{UART0_ADDR + UART_RX, 0},
-	{0, 0},
-	{0, 0},
-	{AC97C_DATA, DMA_DW16 },          /* coherent */
-	{AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
-	{UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
-	{UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
-	{USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
-	{USBD_EP0WR, DMA_DW8 | DMA_NC},
-	{USBD_EP2WR, DMA_DW8 | DMA_NC},
-	{USBD_EP3WR, DMA_DW8 | DMA_NC},
-	{USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC},
-	{USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC},
-	{I2S_DATA, DMA_DW32 | DMA_NC},
-	{I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC}
+	{ AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 },		/* UART0_TX */
+	{ AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR },	/* UART0_RX */
+	{ 0, 0 },	/* DMA_REQ0 */
+	{ 0, 0 },	/* DMA_REQ1 */
+	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 },		/* AC97 TX c */
+	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR },	/* AC97 RX c */
+	{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC },	/* UART3_TX */
+	{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
+	{ AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+	{ AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+	{ AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+	{ AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+	{ AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+	{ AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+	/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
+	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC},	/* I2S TX */
+	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
 };
 
 int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
@@ -123,10 +127,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
 
 /* Device FIFO addresses and default DMA modes - 2nd bank */
 static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
-	{ SD0_XMIT_FIFO, DMA_DS | DMA_DW8 },		/* coherent */
-	{ SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 },	/* coherent */
-	{ SD1_XMIT_FIFO, DMA_DS | DMA_DW8 },		/* coherent */
-	{ SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }	/* coherent */
+	{ AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 },		/* coherent */
+	{ AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR },	/* coherent */
+	{ AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 },		/* coherent */
+	{ AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }	/* coherent */
 };
 
 void dump_au1000_dma_channel(unsigned int dmanr)
@@ -202,7 +206,7 @@ int request_au1000_dma(int dev_id, const char *dev_str,
 	}
 
 	/* fill it in */
-	chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
+	chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN;
 	chan->dev_id = dev_id;
 	chan->dev_str = dev_str;
 	chan->fifo_addr = dev->fifo_addr;
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 55dd7c88851..8b60ba0675e 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -30,7 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
@@ -39,6 +39,36 @@
 #include <asm/mach-pb1x00/pb1000.h>
 #endif
 
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD	0x40
+#define IC_CFG0SET	0x40
+#define IC_CFG0CLR	0x44
+#define IC_CFG1RD	0x48
+#define IC_CFG1SET	0x48
+#define IC_CFG1CLR	0x4C
+#define IC_CFG2RD	0x50
+#define IC_CFG2SET	0x50
+#define IC_CFG2CLR	0x54
+#define IC_REQ0INT	0x54
+#define IC_SRCRD	0x58
+#define IC_SRCSET	0x58
+#define IC_SRCCLR	0x5C
+#define IC_REQ1INT	0x5C
+#define IC_ASSIGNRD	0x60
+#define IC_ASSIGNSET	0x60
+#define IC_ASSIGNCLR	0x64
+#define IC_WAKERD	0x68
+#define IC_WAKESET	0x68
+#define IC_WAKECLR	0x6C
+#define IC_MASKRD	0x70
+#define IC_MASKSET	0x70
+#define IC_MASKCLR	0x74
+#define IC_RISINGRD	0x78
+#define IC_RISINGCLR	0x78
+#define IC_FALLINGRD	0x7C
+#define IC_FALLINGCLR	0x7C
+#define IC_TESTBIT	0x80
+
 static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
 
 /* NOTE on interrupt priorities: The original writers of this code said:
@@ -221,89 +251,101 @@ struct au1xxx_irqmap au1200_irqmap[] __initdata = {
 static void au1x_ic0_unmask(struct irq_data *d)
 {
 	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
-	au_writel(1 << bit, IC0_MASKSET);
-	au_writel(1 << bit, IC0_WAKESET);
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKSET);
+	__raw_writel(1 << bit, base + IC_WAKESET);
+	wmb();
 }
 
 static void au1x_ic1_unmask(struct irq_data *d)
 {
 	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
-	au_writel(1 << bit, IC1_MASKSET);
-	au_writel(1 << bit, IC1_WAKESET);
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKSET);
+	__raw_writel(1 << bit, base + IC_WAKESET);
 
 /* very hacky. does the pb1000 cpld auto-disable this int?
  * nowhere in the current kernel sources is it disabled.	--mlau
  */
 #if defined(CONFIG_MIPS_PB1000)
 	if (d->irq == AU1000_GPIO15_INT)
-		au_writel(0x4000, PB1000_MDR); /* enable int */
+		__raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
 #endif
-	au_sync();
+	wmb();
 }
 
 static void au1x_ic0_mask(struct irq_data *d)
 {
 	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
-	au_writel(1 << bit, IC0_MASKCLR);
-	au_writel(1 << bit, IC0_WAKECLR);
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	wmb();
 }
 
 static void au1x_ic1_mask(struct irq_data *d)
 {
 	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
-	au_writel(1 << bit, IC1_MASKCLR);
-	au_writel(1 << bit, IC1_WAKECLR);
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	wmb();
 }
 
 static void au1x_ic0_ack(struct irq_data *d)
 {
 	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 
 	/*
 	 * This may assume that we don't get interrupts from
 	 * both edges at once, or if we do, that we don't care.
 	 */
-	au_writel(1 << bit, IC0_FALLINGCLR);
-	au_writel(1 << bit, IC0_RISINGCLR);
-	au_sync();
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	wmb();
 }
 
 static void au1x_ic1_ack(struct irq_data *d)
 {
 	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 
 	/*
 	 * This may assume that we don't get interrupts from
 	 * both edges at once, or if we do, that we don't care.
 	 */
-	au_writel(1 << bit, IC1_FALLINGCLR);
-	au_writel(1 << bit, IC1_RISINGCLR);
-	au_sync();
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	wmb();
 }
 
 static void au1x_ic0_maskack(struct irq_data *d)
 {
 	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 
-	au_writel(1 << bit, IC0_WAKECLR);
-	au_writel(1 << bit, IC0_MASKCLR);
-	au_writel(1 << bit, IC0_RISINGCLR);
-	au_writel(1 << bit, IC0_FALLINGCLR);
-	au_sync();
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	wmb();
 }
 
 static void au1x_ic1_maskack(struct irq_data *d)
 {
 	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 
-	au_writel(1 << bit, IC1_WAKECLR);
-	au_writel(1 << bit, IC1_MASKCLR);
-	au_writel(1 << bit, IC1_RISINGCLR);
-	au_writel(1 << bit, IC1_FALLINGCLR);
-	au_sync();
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	wmb();
 }
 
 static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
@@ -318,13 +360,13 @@ static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
 		return -EINVAL;
 
 	local_irq_save(flags);
-	wakemsk = au_readl(SYS_WAKEMSK);
+	wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK);
 	if (on)
 		wakemsk |= 1 << bit;
 	else
 		wakemsk &= ~(1 << bit);
-	au_writel(wakemsk, SYS_WAKEMSK);
-	au_sync();
+	__raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK);
+	wmb();
 	local_irq_restore(flags);
 
 	return 0;
@@ -356,81 +398,74 @@ static struct irq_chip au1x_ic1_chip = {
 static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
 {
 	struct irq_chip *chip;
-	unsigned long icr[6];
-	unsigned int bit, ic, irq = d->irq;
+	unsigned int bit, irq = d->irq;
 	irq_flow_handler_t handler = NULL;
 	unsigned char *name = NULL;
+	void __iomem *base;
 	int ret;
 
 	if (irq >= AU1000_INTC1_INT_BASE) {
 		bit = irq - AU1000_INTC1_INT_BASE;
 		chip = &au1x_ic1_chip;
-		ic = 1;
+		base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 	} else {
 		bit = irq - AU1000_INTC0_INT_BASE;
 		chip = &au1x_ic0_chip;
-		ic = 0;
+		base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 	}
 
 	if (bit > 31)
 		return -EINVAL;
 
-	icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
-	icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
-	icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
-	icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
-	icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
-	icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
-
 	ret = 0;
 
 	switch (flow_type) {	/* cfgregs 2:1:0 */
 	case IRQ_TYPE_EDGE_RISING:	/* 0:0:1 */
-		au_writel(1 << bit, icr[5]);
-		au_writel(1 << bit, icr[4]);
-		au_writel(1 << bit, icr[0]);
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
 		handler = handle_edge_irq;
 		name = "riseedge";
 		break;
 	case IRQ_TYPE_EDGE_FALLING:	/* 0:1:0 */
-		au_writel(1 << bit, icr[5]);
-		au_writel(1 << bit, icr[1]);
-		au_writel(1 << bit, icr[3]);
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
 		handler = handle_edge_irq;
 		name = "falledge";
 		break;
 	case IRQ_TYPE_EDGE_BOTH:	/* 0:1:1 */
-		au_writel(1 << bit, icr[5]);
-		au_writel(1 << bit, icr[1]);
-		au_writel(1 << bit, icr[0]);
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
 		handler = handle_edge_irq;
 		name = "bothedge";
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:	/* 1:0:1 */
-		au_writel(1 << bit, icr[2]);
-		au_writel(1 << bit, icr[4]);
-		au_writel(1 << bit, icr[0]);
+		__raw_writel(1 << bit, base + IC_CFG2SET);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
 		handler = handle_level_irq;
 		name = "hilevel";
 		break;
 	case IRQ_TYPE_LEVEL_LOW:	/* 1:1:0 */
-		au_writel(1 << bit, icr[2]);
-		au_writel(1 << bit, icr[1]);
-		au_writel(1 << bit, icr[3]);
+		__raw_writel(1 << bit, base + IC_CFG2SET);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
 		handler = handle_level_irq;
 		name = "lowlevel";
 		break;
 	case IRQ_TYPE_NONE:		/* 0:0:0 */
-		au_writel(1 << bit, icr[5]);
-		au_writel(1 << bit, icr[4]);
-		au_writel(1 << bit, icr[3]);
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
 		break;
 	default:
 		ret = -EINVAL;
 	}
 	__irq_set_chip_handler_name_locked(d->irq, chip, handler, name);
 
-	au_sync();
+	wmb();
 
 	return ret;
 }
@@ -444,21 +479,21 @@ asmlinkage void plat_irq_dispatch(void)
 		off = MIPS_CPU_IRQ_BASE + 7;
 		goto handle;
 	} else if (pending & CAUSEF_IP2) {
-		s = IC0_REQ0INT;
+		s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT;
 		off = AU1000_INTC0_INT_BASE;
 	} else if (pending & CAUSEF_IP3) {
-		s = IC0_REQ1INT;
+		s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT;
 		off = AU1000_INTC0_INT_BASE;
 	} else if (pending & CAUSEF_IP4) {
-		s = IC1_REQ0INT;
+		s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT;
 		off = AU1000_INTC1_INT_BASE;
 	} else if (pending & CAUSEF_IP5) {
-		s = IC1_REQ1INT;
+		s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT;
 		off = AU1000_INTC1_INT_BASE;
 	} else
 		goto spurious;
 
-	s = au_readl(s);
+	s = __raw_readl((void __iomem *)s);
 	if (unlikely(!s)) {
 spurious:
 		spurious_interrupt();
@@ -469,48 +504,42 @@ handle:
 	do_IRQ(off);
 }
 
+
+static inline void ic_init(void __iomem *base)
+{
+	/* initialize interrupt controller to a safe state */
+	__raw_writel(0xffffffff, base + IC_CFG0CLR);
+	__raw_writel(0xffffffff, base + IC_CFG1CLR);
+	__raw_writel(0xffffffff, base + IC_CFG2CLR);
+	__raw_writel(0xffffffff, base + IC_MASKCLR);
+	__raw_writel(0xffffffff, base + IC_ASSIGNCLR);
+	__raw_writel(0xffffffff, base + IC_WAKECLR);
+	__raw_writel(0xffffffff, base + IC_SRCSET);
+	__raw_writel(0xffffffff, base + IC_FALLINGCLR);
+	__raw_writel(0xffffffff, base + IC_RISINGCLR);
+	__raw_writel(0x00000000, base + IC_TESTBIT);
+	wmb();
+}
+
 static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 {
 	unsigned int bit, irq_nr;
-	int i;
-
-	/*
-	 * Initialize interrupt controllers to a safe state.
-	 */
-	au_writel(0xffffffff, IC0_CFG0CLR);
-	au_writel(0xffffffff, IC0_CFG1CLR);
-	au_writel(0xffffffff, IC0_CFG2CLR);
-	au_writel(0xffffffff, IC0_MASKCLR);
-	au_writel(0xffffffff, IC0_ASSIGNCLR);
-	au_writel(0xffffffff, IC0_WAKECLR);
-	au_writel(0xffffffff, IC0_SRCSET);
-	au_writel(0xffffffff, IC0_FALLINGCLR);
-	au_writel(0xffffffff, IC0_RISINGCLR);
-	au_writel(0x00000000, IC0_TESTBIT);
-
-	au_writel(0xffffffff, IC1_CFG0CLR);
-	au_writel(0xffffffff, IC1_CFG1CLR);
-	au_writel(0xffffffff, IC1_CFG2CLR);
-	au_writel(0xffffffff, IC1_MASKCLR);
-	au_writel(0xffffffff, IC1_ASSIGNCLR);
-	au_writel(0xffffffff, IC1_WAKECLR);
-	au_writel(0xffffffff, IC1_SRCSET);
-	au_writel(0xffffffff, IC1_FALLINGCLR);
-	au_writel(0xffffffff, IC1_RISINGCLR);
-	au_writel(0x00000000, IC1_TESTBIT);
+	void __iomem *base;
 
+	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
+	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
 	mips_cpu_irq_init();
 
 	/* register all 64 possible IC0+IC1 irq sources as type "none".
 	 * Use set_irq_type() to set edge/level behaviour at runtime.
 	 */
-	for (i = AU1000_INTC0_INT_BASE;
-	     (i < AU1000_INTC0_INT_BASE + 32); i++)
-		au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+	for (irq_nr = AU1000_INTC0_INT_BASE;
+	     (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
+		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
 
-	for (i = AU1000_INTC1_INT_BASE;
-	     (i < AU1000_INTC1_INT_BASE + 32); i++)
-		au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+	for (irq_nr = AU1000_INTC1_INT_BASE;
+	     (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
+		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
 
 	/*
 	 * Initialize IC0, which is fixed per processor.
@@ -520,13 +549,13 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 
 		if (irq_nr >= AU1000_INTC1_INT_BASE) {
 			bit = irq_nr - AU1000_INTC1_INT_BASE;
-			if (map->im_request)
-				au_writel(1 << bit, IC1_ASSIGNSET);
+			base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 		} else {
 			bit = irq_nr - AU1000_INTC0_INT_BASE;
-			if (map->im_request)
-				au_writel(1 << bit, IC0_ASSIGNSET);
+			base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 		}
+		if (map->im_request)
+			__raw_writel(1 << bit, base + IC_ASSIGNSET);
 
 		au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type);
 		++map;
@@ -556,90 +585,62 @@ void __init arch_init_irq(void)
 	}
 }
 
-struct alchemy_ic_sysdev {
-	struct sys_device sysdev;
-	void __iomem *base;
-	unsigned long pmdata[7];
-};
 
-static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct alchemy_ic_sysdev *icdev =
-			container_of(dev, struct alchemy_ic_sysdev, sysdev);
+static unsigned long alchemy_ic_pmdata[7 * 2];
 
-	icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
-	icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
-	icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
-	icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
-	icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
-	icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
-	icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
-
-	return 0;
+static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
+{
+	d[0] = __raw_readl(base + IC_CFG0RD);
+	d[1] = __raw_readl(base + IC_CFG1RD);
+	d[2] = __raw_readl(base + IC_CFG2RD);
+	d[3] = __raw_readl(base + IC_SRCRD);
+	d[4] = __raw_readl(base + IC_ASSIGNRD);
+	d[5] = __raw_readl(base + IC_WAKERD);
+	d[6] = __raw_readl(base + IC_MASKRD);
+	ic_init(base);		/* shut it up too while at it */
 }
 
-static int alchemy_ic_resume(struct sys_device *dev)
+static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
 {
-	struct alchemy_ic_sysdev *icdev =
-			container_of(dev, struct alchemy_ic_sysdev, sysdev);
-
-	__raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
-	__raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
-	__raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
-	__raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
-	__raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
-	__raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
-	__raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
-	__raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
-	__raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
-	__raw_writel(0x00000000, icdev->base + IC_TESTBIT);
-	wmb();
-	__raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
-	__raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
-	__raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
-	__raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
-	__raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
-	__raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
+	ic_init(base);
+
+	__raw_writel(d[0], base + IC_CFG0SET);
+	__raw_writel(d[1], base + IC_CFG1SET);
+	__raw_writel(d[2], base + IC_CFG2SET);
+	__raw_writel(d[3], base + IC_SRCSET);
+	__raw_writel(d[4], base + IC_ASSIGNSET);
+	__raw_writel(d[5], base + IC_WAKESET);
 	wmb();
 
-	__raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
+	__raw_writel(d[6], base + IC_MASKSET);
 	wmb();
+}
 
+static int alchemy_ic_suspend(void)
+{
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			       alchemy_ic_pmdata);
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			       &alchemy_ic_pmdata[7]);
 	return 0;
 }
 
-static struct sysdev_class alchemy_ic_sysdev_class = {
-	.name		= "ic",
+static void alchemy_ic_resume(void)
+{
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			      &alchemy_ic_pmdata[7]);
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			      alchemy_ic_pmdata);
+}
+
+static struct syscore_ops alchemy_ic_syscore_ops = {
 	.suspend	= alchemy_ic_suspend,
 	.resume		= alchemy_ic_resume,
 };
 
-static int __init alchemy_ic_sysdev_init(void)
+static int __init alchemy_ic_pm_init(void)
 {
-	struct alchemy_ic_sysdev *icdev;
-	unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
-	int err, i;
-
-	err = sysdev_class_register(&alchemy_ic_sysdev_class);
-	if (err)
-		return err;
-
-	for (i = 0; i < 2; i++) {
-		icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
-		if (!icdev)
-			return -ENOMEM;
-
-		icdev->base = ioremap(icbase[i], 0x1000);
-
-		icdev->sysdev.id = i;
-		icdev->sysdev.cls = &alchemy_ic_sysdev_class;
-		err = sysdev_register(&icdev->sysdev);
-		if (err) {
-			kfree(icdev);
-			return err;
-		}
-	}
-
+	register_syscore_ops(&alchemy_ic_syscore_ops);
 	return 0;
 }
-device_initcall(alchemy_ic_sysdev_init);
+device_initcall(alchemy_ic_pm_init);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 9e7814db3d0..3b2c18b1434 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -13,9 +13,10 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
-#include <linux/init.h>
+#include <linux/slab.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -30,21 +31,12 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 #ifdef CONFIG_SERIAL_8250
 	switch (state) {
 	case 0:
-		if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
-			/* power-on sequence as suggested in the databooks */
-			__raw_writel(0, port->membase + UART_MOD_CNTRL);
-			wmb();
-			__raw_writel(1, port->membase + UART_MOD_CNTRL);
-			wmb();
-		}
-		__raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
-		wmb();
+		alchemy_uart_enable(CPHYSADDR(port->membase));
 		serial8250_do_pm(port, state, old_state);
 		break;
 	case 3:		/* power off */
 		serial8250_do_pm(port, state, old_state);
-		__raw_writel(0, port->membase + UART_MOD_CNTRL);
-		wmb();
+		alchemy_uart_disable(CPHYSADDR(port->membase));
 		break;
 	default:
 		serial8250_do_pm(port, state, old_state);
@@ -65,38 +57,60 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 		.pm		= alchemy_8250_pm,		\
 	}
 
-static struct plat_serial8250_port au1x00_uart_data[] = {
-#if defined(CONFIG_SOC_AU1000)
-	PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
-	PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
-	PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
-	PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
-#elif defined(CONFIG_SOC_AU1500)
-	PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
-	PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
-#elif defined(CONFIG_SOC_AU1100)
-	PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
-	PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
-	PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
-#elif defined(CONFIG_SOC_AU1550)
-	PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
-	PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
-	PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
-#elif defined(CONFIG_SOC_AU1200)
-	PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
-	PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
-#endif
-	{ },
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+		PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1100] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1200] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+	},
 };
 
 static struct platform_device au1xx0_uart_device = {
 	.name			= "serial8250",
 	.id			= PLAT8250_DEV_AU1X00,
-	.dev			= {
-		.platform_data	= au1x00_uart_data,
-	},
 };
 
+static void __init alchemy_setup_uarts(int ctype)
+{
+	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+	int s = sizeof(struct plat_serial8250_port);
+	int c = alchemy_get_uarts(ctype);
+	struct plat_serial8250_port *ports;
+
+	ports = kzalloc(s * (c + 1), GFP_KERNEL);
+	if (!ports) {
+		printk(KERN_INFO "Alchemy: no memory for UART data\n");
+		return;
+	}
+	memcpy(ports, au1x00_uart_data[ctype], s * c);
+	au1xx0_uart_device.dev.platform_data = ports;
+
+	/* Fill up uartclk. */
+	for (s = 0; s < c; s++)
+		ports[s].uartclk = uartclk;
+	if (platform_device_register(&au1xx0_uart_device))
+		printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
 /* OHCI (USB full speed host controller) */
 static struct resource au1xxx_usb_ohci_resources[] = {
 	[0] = {
@@ -269,8 +283,8 @@ extern struct au1xmmc_platform_data au1xmmc_platdata[2];
 
 static struct resource au1200_mmc0_resources[] = {
 	[0] = {
-		.start          = SD0_PHYS_ADDR,
-		.end            = SD0_PHYS_ADDR + 0x7ffff,
+		.start          = AU1100_SD0_PHYS_ADDR,
+		.end            = AU1100_SD0_PHYS_ADDR + 0xfff,
 		.flags          = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -305,8 +319,8 @@ static struct platform_device au1200_mmc0_device = {
 #ifndef CONFIG_MIPS_DB1200
 static struct resource au1200_mmc1_resources[] = {
 	[0] = {
-		.start          = SD1_PHYS_ADDR,
-		.end            = SD1_PHYS_ADDR + 0x7ffff,
+		.start          = AU1100_SD1_PHYS_ADDR,
+		.end            = AU1100_SD1_PHYS_ADDR + 0xfff,
 		.flags          = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -359,15 +373,16 @@ static struct platform_device pbdb_smbus_device = {
 #endif
 
 /* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES_COUNT	3	/* MAC regs base, MAC enable reg, MAC INT */
 #define MAC_RES(_base, _enable, _irq)			\
 	{						\
-		.start	= CPHYSADDR(_base),		\
-		.end	= CPHYSADDR(_base + 0xffff),	\
+		.start	= _base,			\
+		.end	= _base + 0xffff,		\
 		.flags	= IORESOURCE_MEM,		\
 	},						\
 	{						\
-		.start	= CPHYSADDR(_enable),		\
-		.end	= CPHYSADDR(_enable + 0x3),	\
+		.start	= _enable,			\
+		.end	= _enable + 0x3,		\
 		.flags	= IORESOURCE_MEM,		\
 	},						\
 	{						\
@@ -376,19 +391,29 @@ static struct platform_device pbdb_smbus_device = {
 		.flags	= IORESOURCE_IRQ		\
 	}
 
-static struct resource au1xxx_eth0_resources[] = {
-#if defined(CONFIG_SOC_AU1000)
-	MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1100)
-	MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1550)
-	MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
-#elif defined(CONFIG_SOC_AU1500)
-	MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
-#endif
+static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1000_MAC0_DMA_INT)
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		MAC_RES(AU1500_MAC0_PHYS_ADDR,
+			AU1500_MACEN_PHYS_ADDR,
+			AU1500_MAC0_DMA_INT)
+	},
+	[ALCHEMY_CPU_AU1100] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1100_MAC0_DMA_INT)
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1550_MAC0_DMA_INT)
+	},
 };
 
-
 static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
 	.phy1_search_mac0 = 1,
 };
@@ -396,20 +421,26 @@ static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
 static struct platform_device au1xxx_eth0_device = {
 	.name		= "au1000-eth",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(au1xxx_eth0_resources),
-	.resource	= au1xxx_eth0_resources,
+	.num_resources	= MAC_RES_COUNT,
 	.dev.platform_data = &au1xxx_eth0_platform_data,
 };
 
-#ifndef CONFIG_SOC_AU1100
-static struct resource au1xxx_eth1_resources[] = {
-#if defined(CONFIG_SOC_AU1000)
-	MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
-#elif defined(CONFIG_SOC_AU1550)
-	MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
-#elif defined(CONFIG_SOC_AU1500)
-	MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
-#endif
+static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		MAC_RES(AU1000_MAC1_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR + 4,
+			AU1000_MAC1_DMA_INT)
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		MAC_RES(AU1500_MAC1_PHYS_ADDR,
+			AU1500_MACEN_PHYS_ADDR + 4,
+			AU1500_MAC1_DMA_INT)
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		MAC_RES(AU1000_MAC1_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR + 4,
+			AU1550_MAC1_DMA_INT)
+	},
 };
 
 static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
@@ -419,11 +450,9 @@ static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
 static struct platform_device au1xxx_eth1_device = {
 	.name		= "au1000-eth",
 	.id		= 1,
-	.num_resources	= ARRAY_SIZE(au1xxx_eth1_resources),
-	.resource	= au1xxx_eth1_resources,
+	.num_resources	= MAC_RES_COUNT,
 	.dev.platform_data = &au1xxx_eth1_platform_data,
 };
-#endif
 
 void __init au1xxx_override_eth_cfg(unsigned int port,
 			struct au1000_eth_platform_data *eth_data)
@@ -434,15 +463,65 @@ void __init au1xxx_override_eth_cfg(unsigned int port,
 	if (port == 0)
 		memcpy(&au1xxx_eth0_platform_data, eth_data,
 			sizeof(struct au1000_eth_platform_data));
-#ifndef CONFIG_SOC_AU1100
 	else
 		memcpy(&au1xxx_eth1_platform_data, eth_data,
 			sizeof(struct au1000_eth_platform_data));
-#endif
+}
+
+static void __init alchemy_setup_macs(int ctype)
+{
+	int ret, i;
+	unsigned char ethaddr[6];
+	struct resource *macres;
+
+	/* Handle 1st MAC */
+	if (alchemy_get_macs(ctype) < 1)
+		return;
+
+	macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	if (!macres) {
+		printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
+		return;
+	}
+	memcpy(macres, au1xxx_eth0_resources[ctype],
+	       sizeof(struct resource) * MAC_RES_COUNT);
+	au1xxx_eth0_device.resource = macres;
+
+	i = prom_get_ethernet_addr(ethaddr);
+	if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+		memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
+	ret = platform_device_register(&au1xxx_eth0_device);
+	if (!ret)
+		printk(KERN_INFO "Alchemy: failed to register MAC0\n");
+
+
+	/* Handle 2nd MAC */
+	if (alchemy_get_macs(ctype) < 2)
+		return;
+
+	macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	if (!macres) {
+		printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
+		return;
+	}
+	memcpy(macres, au1xxx_eth1_resources[ctype],
+	       sizeof(struct resource) * MAC_RES_COUNT);
+	au1xxx_eth1_device.resource = macres;
+
+	ethaddr[5] += 1;	/* next addr for 2nd MAC */
+	if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+		memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
+	/* Register second MAC if enabled in pinfunc */
+	if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) {
+		ret = platform_device_register(&au1xxx_eth1_device);
+		if (ret)
+			printk(KERN_INFO "Alchemy: failed to register MAC1\n");
+	}
 }
 
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
-	&au1xx0_uart_device,
 	&au1xxx_usb_ohci_device,
 #ifdef CONFIG_FB_AU1100
 	&au1100_lcd_device,
@@ -460,36 +539,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 #ifdef SMBUS_PSC_BASE
 	&pbdb_smbus_device,
 #endif
-	&au1xxx_eth0_device,
 };
 
 static int __init au1xxx_platform_init(void)
 {
-	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
-	int err, i;
-	unsigned char ethaddr[6];
+	int err, ctype = alchemy_get_cputype();
 
-	/* Fill up uartclk. */
-	for (i = 0; au1x00_uart_data[i].flags; i++)
-		au1x00_uart_data[i].uartclk = uartclk;
-
-	/* use firmware-provided mac addr if available and necessary */
-	i = prom_get_ethernet_addr(ethaddr);
-	if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
-		memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+	alchemy_setup_uarts(ctype);
+	alchemy_setup_macs(ctype);
 
 	err = platform_add_devices(au1xxx_platform_devices,
 				   ARRAY_SIZE(au1xxx_platform_devices));
-#ifndef CONFIG_SOC_AU1100
-	ethaddr[5] += 1;	/* next addr for 2nd MAC */
-	if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
-		memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
-
-	/* Register second MAC if enabled in pinfunc */
-	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
-		err = platform_device_register(&au1xxx_eth1_device);
-#endif
-
 	return err;
 }
 
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 561e5da2658..1b887c86841 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -52,8 +52,6 @@ void __init plat_mem_setup(void)
 	/* this is faster than wasting cycles trying to approximate it */
 	preset_lpj = (est_freq >> 1) / HZ;
 
-	board_setup();  /* board specific setup */
-
 	if (au1xxx_cpu_needs_config_od())
 		/* Various early Au1xx0 errata corrected by this */
 		set_c0_config(1 << 19); /* Set Config[OD] */
@@ -61,6 +59,8 @@ void __init plat_mem_setup(void)
 		/* Clear to obtain best system bus performance */
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
+	board_setup();  /* board specific setup */
+
 	/* IO/MEM resources. */
 	set_io_port_base(0);
 	ioport_resource.start = IOPORT_RESOURCE_START;
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 2aecb2fdf98..d5da6adbf63 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -141,8 +141,7 @@ static int __init alchemy_time_init(unsigned int m2int)
 		goto cntr_err;
 
 	/* register counter1 clocksource and event device */
-	clocksource_set_clock(&au1x_counter1_clocksource, 32768);
-	clocksource_register(&au1x_counter1_clocksource);
+	clocksource_register_hz(&au1x_counter1_clocksource, 32768);
 
 	cd->shift = 32;
 	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index 4a8980027ec..1dac4f27d33 100644
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -23,6 +23,13 @@ void __init board_setup(void)
 	unsigned long freq0, clksrc, div, pfc;
 	unsigned short whoami;
 
+	/* Set Config[OD] (disable overlapping bus transaction):
+	 * This gets rid of a _lot_ of spurious interrupts (especially
+	 * wrt. IDE); but incurs ~10% performance hit in some
+	 * cpu-bound applications.
+	 */
+	set_c0_config(1 << 19);
+
 	bcsr_init(DB1200_BCSR_PHYS_ADDR,
 		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
 
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 05f120ff90f..5c956fe8760 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -127,13 +127,10 @@ const char *get_system_type(void)
 void __init board_setup(void)
 {
 	unsigned long bcsr1, bcsr2;
-	u32 pin_func;
 
 	bcsr1 = DB1000_BCSR_PHYS_ADDR;
 	bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
 
-	pin_func = 0;
-
 #ifdef CONFIG_MIPS_DB1000
 	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
 #endif
@@ -164,12 +161,16 @@ void __init board_setup(void)
 	/* Not valid for Au1550 */
 #if defined(CONFIG_IRDA) && \
    (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
-	/* Set IRFIRSEL instead of GPIO15 */
-	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
-	au_writel(pin_func, SYS_PINFUNC);
-	/* Power off until the driver is in use */
-	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
-				BCSR_RESETS_IRDA_MODE_OFF);
+	{
+		u32 pin_func;
+
+		/* Set IRFIRSEL instead of GPIO15 */
+		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
+		au_writel(pin_func, SYS_PINFUNC);
+		/* Power off until the driver is in use */
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+			 BCSR_RESETS_IRDA_MODE_OFF);
+	}
 #endif
 	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
@@ -177,31 +178,35 @@ void __init board_setup(void)
 	alchemy_gpio1_input_enable();
 
 #ifdef CONFIG_MIPS_MIRAGE
-	/* GPIO[20] is output */
-	alchemy_gpio_direction_output(20, 0);
+	{
+		u32 pin_func;
 
-	/* Set GPIO[210:208] instead of SSI_0 */
-	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
+		/* GPIO[20] is output */
+		alchemy_gpio_direction_output(20, 0);
 
-	/* Set GPIO[215:211] for LEDs */
-	pin_func |= 5 << 2;
+		/* Set GPIO[210:208] instead of SSI_0 */
+		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
 
-	/* Set GPIO[214:213] for more LEDs */
-	pin_func |= 5 << 12;
+		/* Set GPIO[215:211] for LEDs */
+		pin_func |= 5 << 2;
 
-	/* Set GPIO[207:200] instead of PCMCIA/LCD */
-	pin_func |= SYS_PF_LCD | SYS_PF_PC;
-	au_writel(pin_func, SYS_PINFUNC);
+		/* Set GPIO[214:213] for more LEDs */
+		pin_func |= 5 << 12;
 
-	/*
-	 * Enable speaker amplifier.  This should
-	 * be part of the audio driver.
-	 */
-	alchemy_gpio_direction_output(209, 1);
+		/* Set GPIO[207:200] instead of PCMCIA/LCD */
+		pin_func |= SYS_PF_LCD | SYS_PF_PC;
+		au_writel(pin_func, SYS_PINFUNC);
 
-	pm_power_off = mirage_power_off;
-	_machine_halt = mirage_power_off;
-	_machine_restart = (void(*)(char *))mips_softreset;
+		/*
+		 * Enable speaker amplifier.  This should
+		 * be part of the audio driver.
+		 */
+		alchemy_gpio_direction_output(209, 1);
+
+		pm_power_off = mirage_power_off;
+		_machine_halt = mirage_power_off;
+		_machine_restart = (void(*)(char *))mips_softreset;
+	}
 #endif
 
 #ifdef CONFIG_MIPS_BOSPORUS
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 2d85c4b5be0..e64fdcbf75d 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -65,7 +65,7 @@ void __init board_setup(void)
 
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
+	alchemy_gpio1_input_enable();
 	udelay(100);
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 83f46215eb0..3b4fa320696 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -56,7 +56,7 @@ void __init board_setup(void)
 	sys_clksrc = sys_freqctrl = pin_func = 0;
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
+	alchemy_gpio1_input_enable();
 	udelay(100);
 
 	/* GPIO201 is input for PCMCIA card detect */
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index baeb2138505..e5306b56da6 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -62,5 +62,5 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
-    alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
index ad2e3f13793..5f8f0691ed2 100644
--- a/arch/mips/alchemy/gpr/board_setup.c
+++ b/arch/mips/alchemy/gpr/board_setup.c
@@ -36,9 +36,6 @@
 
 #include <prom.h>
 
-#define UART1_ADDR	KSEG1ADDR(UART1_PHYS_ADDR)
-#define UART3_ADDR	KSEG1ADDR(UART3_PHYS_ADDR)
-
 char irq_tab_alchemy[][5] __initdata = {
 	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
 };
@@ -67,18 +64,15 @@ static void gpr_power_off(void)
 
 void __init board_setup(void)
 {
-	printk(KERN_INFO "Tarpeze ITS GPR board\n");
+	printk(KERN_INFO "Trapeze ITS GPR board\n");
 
 	pm_power_off = gpr_power_off;
 	_machine_halt = gpr_power_off;
 	_machine_restart = gpr_reset;
 
-	/* Enable UART3 */
-	au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */
-	au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
-	/* Enable UART1 */
-	au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
-	au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
+	/* Enable UART1/3 */
+	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+	alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
 
 	/* Take away Reset of UMTS-card */
 	alchemy_gpio_direction_output(215, 1);
diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c
index f044f4c541d..229aafae680 100644
--- a/arch/mips/alchemy/gpr/init.c
+++ b/arch/mips/alchemy/gpr/init.c
@@ -59,5 +59,5 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
-	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index cf436ab679a..3ae984cf98c 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -87,7 +87,7 @@ void __init board_setup(void)
 	au_writel(SYS_PF_NI2, SYS_PINFUNC);
 
 	/* Initialize GPIO */
-	au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+	au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
 	alchemy_gpio_direction_output(0, 0);	/* Disable M66EN (PCI 66MHz) */
 	alchemy_gpio_direction_output(3, 1);	/* Disable PCI CLKRUN# */
 	alchemy_gpio_direction_output(1, 1);	/* Enable EXT_IO3 */
diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index f8d25575fa0..2e81cc7f342 100644
--- a/arch/mips/alchemy/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
@@ -62,5 +62,5 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
-	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 956f946218c..55628e390fd 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -53,8 +53,8 @@ static struct platform_device mtx1_button = {
 
 static struct resource mtx1_wdt_res[] = {
 	[0] = {
-		.start	= 15,
-		.end	= 15,
+		.start	= 215,
+		.end	= 215,
 		.name	= "mtx1-wdt-gpio",
 		.flags	= IORESOURCE_IRQ,
 	}
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index febfb0fb089..81e57fad07a 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -66,13 +66,10 @@ void __init board_setup(void)
 	au_writel(pin_func, SYS_PINFUNC);
 
 	/* Enable UART */
-	au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
-	mdelay(10);
-	au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
-	mdelay(10);
-
-	/* Enable DTR = USB power up */
-	au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
+	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+	/* Enable DTR (MCR bit 0) = USB power up */
+	__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
+	wmb();
 
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)
diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 15125c2fda7..0ee02cfa989 100644
--- a/arch/mips/alchemy/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
@@ -51,14 +51,13 @@ void __init prom_init(void)
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
+	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
 		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
+
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
 void prom_putchar(unsigned char c)
 {
-	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index 425dfa5d6e1..bb571bcdb8f 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -325,9 +325,7 @@ int __init ar7_gpio_init(void)
 		size = 0x1f;
 	}
 
-	gpch->regs = ioremap_nocache(AR7_REGS_GPIO,
-					AR7_REGS_GPIO + 0x10);
-
+	gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size);
 	if (!gpch->regs) {
 		printk(KERN_ERR "%s: failed to ioremap regs\n",
 					gpch->chip.label);
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index e5b6615731e..54db815bc86 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2005 Broadcom Corporation
  * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -23,7 +24,7 @@
 static char nvram_buf[NVRAM_SPACE];
 
 /* Probe for NVRAM header */
-static void __init early_nvram_init(void)
+static void early_nvram_init(void)
 {
 	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
 	struct nvram_header *header;
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index c95f90bf734..73b529b5743 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -3,6 +3,7 @@
  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
  *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
  *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
+ *  Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -57,10 +58,49 @@ static void bcm47xx_machine_halt(void)
 }
 
 #define READ_FROM_NVRAM(_outvar, name, buf) \
-	if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+	if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
 		sprom->_outvar = simple_strtoul(buf, NULL, 0);
 
-static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+#define READ_FROM_NVRAM2(_outvar, name1, name2, buf) \
+	if (nvram_getprefix(prefix, name1, buf, sizeof(buf)) >= 0 || \
+	    nvram_getprefix(prefix, name2, buf, sizeof(buf)) >= 0)\
+		sprom->_outvar = simple_strtoul(buf, NULL, 0);
+
+static inline int nvram_getprefix(const char *prefix, char *name,
+				  char *buf, int len)
+{
+	if (prefix) {
+		char key[100];
+
+		snprintf(key, sizeof(key), "%s%s", prefix, name);
+		return nvram_getenv(key, buf, len);
+	}
+
+	return nvram_getenv(name, buf, len);
+}
+
+static u32 nvram_getu32(const char *name, char *buf, int len)
+{
+	int rv;
+	char key[100];
+	u16 var0, var1;
+
+	snprintf(key, sizeof(key), "%s0", name);
+	rv = nvram_getenv(key, buf, len);
+	/* return 0 here so this looks like unset */
+	if (rv < 0)
+		return 0;
+	var0 = simple_strtoul(buf, NULL, 0);
+
+	snprintf(key, sizeof(key), "%s1", name);
+	rv = nvram_getenv(key, buf, len);
+	if (rv < 0)
+		return 0;
+	var1 = simple_strtoul(buf, NULL, 0);
+	return var1 << 16 | var0;
+}
+
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
 {
 	char buf[100];
 	u32 boardflags;
@@ -69,11 +109,12 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 
 	sprom->revision = 1; /* Fallback: Old hardware does not define this. */
 	READ_FROM_NVRAM(revision, "sromrev", buf);
-	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+	if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getprefix(prefix, "macaddr", buf, sizeof(buf)) >= 0)
 		nvram_parse_macaddr(buf, sprom->il0mac);
-	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+	if (nvram_getprefix(prefix, "et0macaddr", buf, sizeof(buf)) >= 0)
 		nvram_parse_macaddr(buf, sprom->et0mac);
-	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+	if (nvram_getprefix(prefix, "et1macaddr", buf, sizeof(buf)) >= 0)
 		nvram_parse_macaddr(buf, sprom->et1mac);
 	READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
 	READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
@@ -95,20 +136,36 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 	READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
 	READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
 	READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
-	READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
-	READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
-	READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
-	READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
-	READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
-	READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
-	READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
-	READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
-	READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
-	READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+	READ_FROM_NVRAM2(gpio0, "ledbh0", "wl0gpio0", buf);
+	READ_FROM_NVRAM2(gpio1, "ledbh1", "wl0gpio1", buf);
+	READ_FROM_NVRAM2(gpio2, "ledbh2", "wl0gpio2", buf);
+	READ_FROM_NVRAM2(gpio3, "ledbh3", "wl0gpio3", buf);
+	READ_FROM_NVRAM2(maxpwr_bg, "maxp2ga0", "pa0maxpwr", buf);
+	READ_FROM_NVRAM2(maxpwr_al, "maxp5gla0", "pa1lomaxpwr", buf);
+	READ_FROM_NVRAM2(maxpwr_a, "maxp5ga0", "pa1maxpwr", buf);
+	READ_FROM_NVRAM2(maxpwr_ah, "maxp5gha0", "pa1himaxpwr", buf);
+	READ_FROM_NVRAM2(itssi_bg, "itt5ga0", "pa0itssit", buf);
+	READ_FROM_NVRAM2(itssi_a, "itt2ga0", "pa1itssit", buf);
 	READ_FROM_NVRAM(tri2g, "tri2g", buf);
 	READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
 	READ_FROM_NVRAM(tri5g, "tri5g", buf);
 	READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+	READ_FROM_NVRAM(txpid2g[0], "txpid2ga0", buf);
+	READ_FROM_NVRAM(txpid2g[1], "txpid2ga1", buf);
+	READ_FROM_NVRAM(txpid2g[2], "txpid2ga2", buf);
+	READ_FROM_NVRAM(txpid2g[3], "txpid2ga3", buf);
+	READ_FROM_NVRAM(txpid5g[0], "txpid5ga0", buf);
+	READ_FROM_NVRAM(txpid5g[1], "txpid5ga1", buf);
+	READ_FROM_NVRAM(txpid5g[2], "txpid5ga2", buf);
+	READ_FROM_NVRAM(txpid5g[3], "txpid5ga3", buf);
+	READ_FROM_NVRAM(txpid5gl[0], "txpid5gla0", buf);
+	READ_FROM_NVRAM(txpid5gl[1], "txpid5gla1", buf);
+	READ_FROM_NVRAM(txpid5gl[2], "txpid5gla2", buf);
+	READ_FROM_NVRAM(txpid5gl[3], "txpid5gla3", buf);
+	READ_FROM_NVRAM(txpid5gh[0], "txpid5gha0", buf);
+	READ_FROM_NVRAM(txpid5gh[1], "txpid5gha1", buf);
+	READ_FROM_NVRAM(txpid5gh[2], "txpid5gha2", buf);
+	READ_FROM_NVRAM(txpid5gh[3], "txpid5gha3", buf);
 	READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
 	READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
 	READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
@@ -120,19 +177,27 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 	READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
 	READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
 	READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
-	READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
-	READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
-	READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
-	READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
 
-	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+	sprom->ofdm2gpo = nvram_getu32("ofdm2gpo", buf, sizeof(buf));
+	sprom->ofdm5glpo = nvram_getu32("ofdm5glpo", buf, sizeof(buf));
+	sprom->ofdm5gpo = nvram_getu32("ofdm5gpo", buf, sizeof(buf));
+	sprom->ofdm5ghpo = nvram_getu32("ofdm5ghpo", buf, sizeof(buf));
+
+	READ_FROM_NVRAM(antenna_gain.ghz24.a0, "ag0", buf);
+	READ_FROM_NVRAM(antenna_gain.ghz24.a1, "ag1", buf);
+	READ_FROM_NVRAM(antenna_gain.ghz24.a2, "ag2", buf);
+	READ_FROM_NVRAM(antenna_gain.ghz24.a3, "ag3", buf);
+	memcpy(&sprom->antenna_gain.ghz5, &sprom->antenna_gain.ghz24,
+	       sizeof(sprom->antenna_gain.ghz5));
+
+	if (nvram_getprefix(prefix, "boardflags", buf, sizeof(buf)) >= 0) {
 		boardflags = simple_strtoul(buf, NULL, 0);
 		if (boardflags) {
 			sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
 			sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
 		}
 	}
-	if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+	if (nvram_getprefix(prefix, "boardflags2", buf, sizeof(buf)) >= 0) {
 		boardflags = simple_strtoul(buf, NULL, 0);
 		if (boardflags) {
 			sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
@@ -141,6 +206,22 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 	}
 }
 
+int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+	char prefix[10];
+
+	if (bus->bustype == SSB_BUSTYPE_PCI) {
+		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+			 bus->host_pci->bus->number + 1,
+			 PCI_SLOT(bus->host_pci->devfn));
+		bcm47xx_fill_sprom(out, prefix);
+		return 0;
+	} else {
+		printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+}
+
 static int bcm47xx_get_invariants(struct ssb_bus *bus,
 				   struct ssb_init_invariants *iv)
 {
@@ -158,7 +239,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
-	bcm47xx_fill_sprom(&iv->sprom);
+	bcm47xx_fill_sprom(&iv->sprom, NULL);
 
 	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
@@ -172,6 +253,11 @@ void __init plat_mem_setup(void)
 	char buf[100];
 	struct ssb_mipscore *mcore;
 
+	err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom);
+	if (err)
+		printk(KERN_WARNING "bcm47xx: someone else already registered"
+			" a ssb SPROM callback handler (err %d)\n", err);
+
 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
 				      bcm47xx_get_invariants);
 	if (err)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 8dba8cfb752..40b223b603b 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -643,6 +643,17 @@ static struct ssb_sprom bcm63xx_sprom = {
 	.boardflags_lo		= 0x2848,
 	.boardflags_hi		= 0x0000,
 };
+
+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+	if (bus->bustype == SSB_BUSTYPE_PCI) {
+		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+		return 0;
+	} else {
+		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+}
 #endif
 
 /*
@@ -793,8 +804,9 @@ void __init board_prom_init(void)
 	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
 		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-		if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
-			printk(KERN_ERR "failed to register fallback SPROM\n");
+		if (ssb_arch_register_fallback_sprom(
+				&bcm63xx_get_fallback_sprom) < 0)
+			printk(KERN_ERR PFX "failed to register fallback SPROM\n");
 	}
 #endif
 }
diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
index 88c9d963be8..9a6243676e2 100644
--- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
+++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
@@ -16,8 +16,8 @@
 
 int main(int argc, char *argv[])
 {
+	unsigned long long vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
 	struct stat sb;
-	uint64_t vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
 
 	if (argc != 3) {
 		fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n",
diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c
index 1bff22fa089..eb063e6dead 100644
--- a/arch/mips/boot/compressed/uart-alchemy.c
+++ b/arch/mips/boot/compressed/uart-alchemy.c
@@ -3,5 +3,5 @@
 void putc(char c)
 {
 	/* all current (Jan. 2010) in-kernel boards */
-	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index caae2285816..cad555ebeca 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -1,11 +1,7 @@
-config CAVIUM_OCTEON_SPECIFIC_OPTIONS
-	bool "Enable Octeon specific options"
-	depends on CPU_CAVIUM_OCTEON
-	default "y"
+if CPU_CAVIUM_OCTEON
 
 config CAVIUM_CN63XXP1
 	bool "Enable CN63XXP1 errata worarounds"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	default "n"
 	help
 	  The CN63XXP1 chip requires build time workarounds to
@@ -16,7 +12,6 @@ config CAVIUM_CN63XXP1
 
 config CAVIUM_OCTEON_2ND_KERNEL
 	bool "Build the kernel to be used as a 2nd kernel on the same chip"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	default "n"
 	help
 	  This option configures this kernel to be linked at a different
@@ -26,7 +21,6 @@ config CAVIUM_OCTEON_2ND_KERNEL
 
 config CAVIUM_OCTEON_HW_FIX_UNALIGNED
 	bool "Enable hardware fixups of unaligned loads and stores"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	default "y"
 	help
 	  Configure the Octeon hardware to automatically fix unaligned loads
@@ -38,7 +32,6 @@ config CAVIUM_OCTEON_HW_FIX_UNALIGNED
 
 config CAVIUM_OCTEON_CVMSEG_SIZE
 	int "Number of L1 cache lines reserved for CVMSEG memory"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	range 0 54
 	default 1
 	help
@@ -50,7 +43,6 @@ config CAVIUM_OCTEON_CVMSEG_SIZE
 
 config CAVIUM_OCTEON_LOCK_L2
 	bool "Lock often used kernel code in the L2"
-	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
 	default "y"
 	help
 	  Enable locking parts of the kernel into the L2 cache.
@@ -93,7 +85,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_STATIC
-	depends on CPU_CAVIUM_OCTEON
 
 config CAVIUM_OCTEON_HELPER
 	def_bool y
@@ -107,6 +98,8 @@ config NEED_SG_DMA_LENGTH
 
 config SWIOTLB
 	def_bool y
-	depends on CPU_CAVIUM_OCTEON
 	select IOMMU_HELPER
 	select NEED_SG_DMA_LENGTH
+
+
+endif # CPU_CAVIUM_OCTEON
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 26bf71130bf..29d56afbb02 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -105,8 +105,7 @@ unsigned long long notrace sched_clock(void)
 void __init plat_time_init(void)
 {
 	clocksource_mips.rating = 300;
-	clocksource_set_clock(&clocksource_mips, octeon_get_clock_rate());
-	clocksource_register(&clocksource_mips);
+	clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate());
 }
 
 static u64 octeon_udelay_factor;
diff --git a/arch/mips/cavium-octeon/executive/octeon-model.c b/arch/mips/cavium-octeon/executive/octeon-model.c
index 9afc3794ed1..c8d35684504 100644
--- a/arch/mips/cavium-octeon/executive/octeon-model.c
+++ b/arch/mips/cavium-octeon/executive/octeon-model.c
@@ -75,7 +75,7 @@ const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer)
 
 	num_cores = cvmx_octeon_num_cores();
 
-	/* Make sure the non existant devices look disabled */
+	/* Make sure the non existent devices look disabled */
 	switch ((chip_id >> 8) & 0xff) {
 	case 6:		/* CN50XX */
 	case 2:		/* CN30XX */
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index cecaf62aef3..cd61d7281d9 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -75,7 +75,7 @@ static int __init octeon_cf_device_init(void)
 		 * zero.
 		 */
 
-		/* Asume that CS1 immediately follows. */
+		/* Assume that CS1 immediately follows. */
 		mio_boot_reg_cfg.u64 =
 			cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1));
 		region_base = mio_boot_reg_cfg.s.base << 16;
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 8b139bf4a1b..2d9028f1474 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -288,7 +288,6 @@ void octeon_user_io_init(void)
 	union octeon_cvmemctl cvmmemctl;
 	union cvmx_iob_fau_timeout fau_timeout;
 	union cvmx_pow_nw_tim nm_tim;
-	uint64_t cvmctl;
 
 	/* Get the current settings for CP0_CVMMEMCTL_REG */
 	cvmmemctl.u64 = read_c0_cvmmemctl();
@@ -392,12 +391,6 @@ void octeon_user_io_init(void)
 			  CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE,
 			  CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128);
 
-	/* Move the performance counter interrupts to IRQ 6 */
-	cvmctl = read_c0_cvmctl();
-	cvmctl &= ~(7 << 7);
-	cvmctl |= 6 << 7;
-	write_c0_cvmctl(cvmctl);
-
 	/* Set a default for the hardware timeouts */
 	fau_timeout.u64 = 0;
 	fau_timeout.s.tout_val = 0xfff;
@@ -662,7 +655,7 @@ void __init plat_mem_setup(void)
 	 * some memory vectors. When SPARSEMEM is in use, it doesn't
 	 * verify that the size is big enough for the final
 	 * vectors. Making the smallest chuck 4MB seems to be enough
-	 * to consistantly work.
+	 * to consistently work.
 	 */
 	mem_alloc_size = 4 << 20;
 	if (mem_alloc_size > MAX_MEMORY)
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index ba78b21cc8d..8b606423bbd 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -37,13 +37,15 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
 	uint64_t action;
 
 	/* Load the mailbox register to figure out what we're supposed to do */
-	action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid));
+	action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)) & 0xffff;
 
 	/* Clear the mailbox to clear the interrupt */
 	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action);
 
 	if (action & SMP_CALL_FUNCTION)
 		smp_call_function_interrupt();
+	if (action & SMP_RESCHEDULE_YOURSELF)
+		scheduler_ipi();
 
 	/* Check if we've been told to flush the icache */
 	if (action & SMP_ICACHE_FLUSH)
@@ -200,16 +202,15 @@ void octeon_prepare_cpus(unsigned int max_cpus)
 	if (labi->labi_signature != LABI_SIGNATURE)
 		panic("The bootloader version on this board is incorrect.");
 #endif
-
-	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
+	/*
+	 * Only the low order mailbox bits are used for IPIs, leave
+	 * the other bits alone.
+	 */
+	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
 	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
-			"mailbox0", mailbox_interrupt)) {
+			"SMP-IPI", mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
 	}
-	if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED,
-			"mailbox1", mailbox_interrupt)) {
-		panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
-	}
 }
 
 /**
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 167c1d07b80..b6acd2f256b 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -86,8 +86,8 @@ CONFIG_NET_SCHED=y
 CONFIG_NET_EMATCH=y
 CONFIG_NET_CLS_ACT=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -329,7 +329,7 @@ CONFIG_USB_LED=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_M66592=y
 CONFIG_MMC=m
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
 CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_FB_SM7XX=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 7270f3183bd..5527abbb7de 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -374,7 +374,7 @@ CONFIG_FB_CIRRUS=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_HID=m
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index a97a42c6b2c..37862b2ce36 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -225,8 +225,8 @@ CONFIG_TOSHIBA_FIR=m
 CONFIG_VLSI_FIR=m
 CONFIG_MCS_FIR=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
new file mode 100644
index 00000000000..e4b399fdaa6
--- /dev/null
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -0,0 +1,574 @@
+CONFIG_NLM_XLR_BOARD=y
+CONFIG_HIGHMEM=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_KEXEC=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_CROSS_COMPILE="mips64-unknown-linux-gnu-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs"
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BINFMT_MISC=m
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NET_IPIP=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NETLABEL=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_DECNET_NF_GRABULATOR=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_RDS=m
+CONFIG_RDS_TCP=m
+CONFIG_TIPC=m
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_DECNET=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+CONFIG_ECONET=m
+CONFIG_ECONET_AUNUDP=y
+CONFIG_ECONET_NATIVE=y
+CONFIG_WAN_ROUTER=m
+CONFIG_PHONET=m
+CONFIG_IEEE802154=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_DCB=y
+CONFIG_NET_PKTGEN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_CONNECTOR=y
+CONFIG_MTD=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_CDROM_PKTCDVD=y
+CONFIG_MISC_DEVICES=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_TGT_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_ISCSI_TCP=m
+CONFIG_LIBFCOE=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_N_HDLC=m
+# CONFIG_DEVKMEM is not set
+CONFIG_STALDRV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=48
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_RAW_DRIVER=m
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_ADFS_FS=m
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=y
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+CONFIG_EXOFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+CONFIG_ACORN_PARTITION_ICS=y
+CONFIG_ACORN_PARTITION_RISCIX=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_SGI_PARTITION=y
+CONFIG_ULTRIX_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SCHED_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_KGDB=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_LSM_MMAP_MIN_ADDR=0
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SMACK=y
+CONFIG_SECURITY_TOMOYO=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRC_CCITT=m
+CONFIG_CRC7=m
diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c
index c508c00dbb6..b7f9dd3c93c 100644
--- a/arch/mips/fw/arc/promlib.c
+++ b/arch/mips/fw/arc/promlib.c
@@ -4,7 +4,7 @@
  * for more details.
  *
  * Copyright (C) 1996 David S. Miller (dm@sgi.com)
- * Compability with board caches, Ulf Carlsson
+ * Compatibility with board caches, Ulf Carlsson
  */
 #include <linux/kernel.h>
 #include <asm/sgialib.h>
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
index 650ac9ba734..b4db69fbc40 100644
--- a/arch/mips/include/asm/cache.h
+++ b/arch/mips/include/asm/cache.h
@@ -17,6 +17,6 @@
 #define SMP_CACHE_SHIFT		L1_CACHE_SHIFT
 #define SMP_CACHE_BYTES		L1_CACHE_BYTES
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #endif /* _ASM_CACHE_H */
diff --git a/arch/mips/include/asm/cevt-r4k.h b/arch/mips/include/asm/cevt-r4k.h
index fa4328f9124..65f9bdd02f1 100644
--- a/arch/mips/include/asm/cevt-r4k.h
+++ b/arch/mips/include/asm/cevt-r4k.h
@@ -14,6 +14,9 @@
 #ifndef __ASM_CEVT_R4K_H
 #define __ASM_CEVT_R4K_H
 
+#include <linux/clockchips.h>
+#include <asm/time.h>
+
 DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 
 void mips_event_handler(struct clock_event_device *dev);
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 86877539c6e..34c0d3cb116 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -33,6 +33,7 @@
 #define PRID_COMP_TOSHIBA	0x070000
 #define PRID_COMP_LSI		0x080000
 #define PRID_COMP_LEXRA		0x0b0000
+#define PRID_COMP_NETLOGIC	0x0c0000
 #define PRID_COMP_CAVIUM	0x0d0000
 #define PRID_COMP_INGENIC	0xd00000
 
@@ -142,6 +143,31 @@
 #define PRID_IMP_JZRISC        0x0200
 
 /*
+ * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC
+ */
+#define PRID_IMP_NETLOGIC_XLR732	0x0000
+#define PRID_IMP_NETLOGIC_XLR716	0x0200
+#define PRID_IMP_NETLOGIC_XLR532	0x0900
+#define PRID_IMP_NETLOGIC_XLR308	0x0600
+#define PRID_IMP_NETLOGIC_XLR532C	0x0800
+#define PRID_IMP_NETLOGIC_XLR516C	0x0a00
+#define PRID_IMP_NETLOGIC_XLR508C	0x0b00
+#define PRID_IMP_NETLOGIC_XLR308C	0x0f00
+#define PRID_IMP_NETLOGIC_XLS608	0x8000
+#define PRID_IMP_NETLOGIC_XLS408	0x8800
+#define PRID_IMP_NETLOGIC_XLS404	0x8c00
+#define PRID_IMP_NETLOGIC_XLS208	0x8e00
+#define PRID_IMP_NETLOGIC_XLS204	0x8f00
+#define PRID_IMP_NETLOGIC_XLS108	0xce00
+#define PRID_IMP_NETLOGIC_XLS104	0xcf00
+#define PRID_IMP_NETLOGIC_XLS616B	0x4000
+#define PRID_IMP_NETLOGIC_XLS608B	0x4a00
+#define PRID_IMP_NETLOGIC_XLS416B	0x4400
+#define PRID_IMP_NETLOGIC_XLS412B	0x4c00
+#define PRID_IMP_NETLOGIC_XLS408B	0x4e00
+#define PRID_IMP_NETLOGIC_XLS404B	0x4f00
+
+/*
  * Definitions for 7:0 on legacy processors
  */
 
@@ -234,6 +260,7 @@ enum cpu_type_enum {
 	 */
 	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
 	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
+	CPU_XLR,
 
 	CPU_LAST
 };
diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h
index b9c8203688d..c0ead631384 100644
--- a/arch/mips/include/asm/dec/prom.h
+++ b/arch/mips/include/asm/dec/prom.h
@@ -108,7 +108,7 @@ extern int (*__pmax_close)(int);
 
 /*
  * On MIPS64 we have to call PROM functions via a helper
- * dispatcher to accomodate ABI incompatibilities.
+ * dispatcher to accommodate ABI incompatibilities.
  */
 #define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \
 				 __asm__(#fun " = call_o32")
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 655f849bd08..7aa37ddfca4 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -5,7 +5,9 @@
 #include <asm/cache.h>
 #include <asm-generic/dma-coherent.h>
 
+#ifndef CONFIG_SGI_IP27	/* Kludge to fix 2.6.39 build for IP27 */
 #include <dma-coherence.h>
+#endif
 
 extern struct dma_map_ops *mips_dma_map_ops;
 
diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h
index 992d232adc8..c5c7c0e6064 100644
--- a/arch/mips/include/asm/floppy.h
+++ b/arch/mips/include/asm/floppy.h
@@ -24,7 +24,7 @@ static inline void fd_cacheflush(char * addr, long size)
  * And on Mips's the CMOS info fails also ...
  *
  * FIXME: This information should come from the ARC configuration tree
- *        or whereever a particular machine has stored this ...
+ *        or wherever a particular machine has stored this ...
  */
 #define FLOPPY0_TYPE 		fd_drive_type(0)
 #define FLOPPY1_TYPE		fd_drive_type(1)
diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h
index f5e85601532..c565b7c3f0b 100644
--- a/arch/mips/include/asm/hugetlb.h
+++ b/arch/mips/include/asm/hugetlb.h
@@ -70,6 +70,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
 					 unsigned long addr, pte_t *ptep)
 {
+	flush_tlb_mm(vma->vm_mm);
 }
 
 static inline int huge_pte_none(pte_t pte)
diff --git a/arch/mips/include/asm/hw_irq.h b/arch/mips/include/asm/hw_irq.h
index aca05a43a97..77adda297ad 100644
--- a/arch/mips/include/asm/hw_irq.h
+++ b/arch/mips/include/asm/hw_irq.h
@@ -13,7 +13,7 @@
 extern atomic_t irq_err_count;
 
 /*
- * interrupt-retrigger: NOP for now. This may not be apropriate for all
+ * interrupt-retrigger: NOP for now. This may not be appropriate for all
  * machines, we'll see ...
  */
 
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 48bb8237299..9ad011366f7 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,8 +12,13 @@
 #define PIT_CH0			0x40
 #define PIT_CH2			0x42
 
+#define PIT_LATCH		LATCH
+
 extern raw_spinlock_t i8253_lock;
 
 extern void setup_pit_timer(void);
 
+#define inb_pit inb_p
+#define outb_pit outb_p
+
 #endif /* __ASM_I8253_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 5b017f23e24..b04e4de5dd2 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -242,7 +242,7 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
  * This version of ioremap ensures that the memory is marked uncachable
  * on the CPU as well as honouring existing caching rules from things like
  * the PCI bus. Note that there are other caches and buffers on many
- * busses. In paticular driver authors should read up on PCI writes
+ * busses. In particular driver authors should read up on PCI writes
  *
  * It's useful if some control registers are in such an area and
  * write combining or read caching is not desirable:
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index 9ef3b0d1789..309cbcd6909 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -174,7 +174,7 @@ __asm__(
 	"mtc0	\\flags, $2, 1						\n"
 #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
 	/*
-	 * Slow, but doesn't suffer from a relativly unlikely race
+	 * Slow, but doesn't suffer from a relatively unlikely race
 	 * condition we're having since days 1.
 	 */
 	"	beqz	\\flags, 1f					\n"
diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h
index 7622ccf7507..1881b316ca4 100644
--- a/arch/mips/include/asm/jump_label.h
+++ b/arch/mips/include/asm/jump_label.h
@@ -20,16 +20,18 @@
 #define WORD_INSN ".word"
 #endif
 
-#define JUMP_LABEL(key, label)						\
-	do {								\
-		asm goto("1:\tnop\n\t"					\
-			"nop\n\t"					\
-			".pushsection __jump_table,  \"a\"\n\t"		\
-			WORD_INSN " 1b, %l[" #label "], %0\n\t"		\
-			".popsection\n\t"				\
-			: :  "i" (key) :  : label);			\
-	} while (0)
-
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+	asm goto("1:\tnop\n\t"
+		"nop\n\t"
+		".pushsection __jump_table,  \"aw\"\n\t"
+		WORD_INSN " 1b, %l[l_yes], %0\n\t"
+		".popsection\n\t"
+		: :  "i" (key) : : l_yes);
+	return false;
+l_yes:
+	return true;
+}
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index a6976619160..f260ebed713 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -161,6 +161,45 @@ static inline int alchemy_get_cputype(void)
 	return ALCHEMY_CPU_UNKNOWN;
 }
 
+/* return number of uarts on a given cputype */
+static inline int alchemy_get_uarts(int type)
+{
+	switch (type) {
+	case ALCHEMY_CPU_AU1000:
+		return 4;
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1200:
+		return 2;
+	case ALCHEMY_CPU_AU1100:
+	case ALCHEMY_CPU_AU1550:
+		return 3;
+	}
+	return 0;
+}
+
+/* enable an UART block if it isn't already */
+static inline void alchemy_uart_enable(u32 uart_phys)
+{
+	void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+
+	/* reset, enable clock, deassert reset */
+	if ((__raw_readl(addr + 0x100) & 3) != 3) {
+		__raw_writel(0, addr + 0x100);
+		wmb();
+		__raw_writel(1, addr + 0x100);
+		wmb();
+	}
+	__raw_writel(3, addr + 0x100);
+	wmb();
+}
+
+static inline void alchemy_uart_disable(u32 uart_phys)
+{
+	void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+	__raw_writel(0, addr + 0x100);	/* UART_MOD_CNTRL */
+	wmb();
+}
+
 static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
 {
 	void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys);
@@ -180,6 +219,20 @@ static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
 	wmb();
 }
 
+/* return number of ethernet MACs on a given cputype */
+static inline int alchemy_get_macs(int type)
+{
+	switch (type) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1550:
+		return 2;
+	case ALCHEMY_CPU_AU1100:
+		return 1;
+	}
+	return 0;
+}
+
 /* arch/mips/au1000/common/clocks.c */
 extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
@@ -630,38 +683,42 @@ enum soc_au1200_ints {
 
 /*
  * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
  */
 
+#define AU1000_AC97_PHYS_ADDR		0x10000000 /* 012 */
+#define AU1000_USBD_PHYS_ADDR		0x10200000 /* 0123 */
+#define AU1000_IC0_PHYS_ADDR		0x10400000 /* 01234 */
+#define AU1000_MAC0_PHYS_ADDR		0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR		0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR		0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR		0x10600000 /* 24 */
+#define AU1100_SD1_PHYS_ADDR		0x10680000 /* 24 */
+#define AU1000_I2S_PHYS_ADDR		0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR		0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR		0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR		0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR		0x11100000 /* 01234 */
+#define AU1000_UART1_PHYS_ADDR		0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR		0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR		0x11400000 /* 0123 */
+#define AU1500_GPIO2_PHYS_ADDR		0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR		0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 01234 */
+#define AU1000_DMA_PHYS_ADDR		0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 34 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 34 */
+#define AU1000_MACDMA0_PHYS_ADDR	0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR	0x14004200 /* 0123 */
+
+
 #ifdef CONFIG_SOC_AU1000
 #define	MEM_PHYS_ADDR		0x14000000
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	DMA0_PHYS_ADDR		0x14002000
-#define	DMA1_PHYS_ADDR		0x14002100
-#define	DMA2_PHYS_ADDR		0x14002200
-#define	DMA3_PHYS_ADDR		0x14002300
-#define	DMA4_PHYS_ADDR		0x14002400
-#define	DMA5_PHYS_ADDR		0x14002500
-#define	DMA6_PHYS_ADDR		0x14002600
-#define	DMA7_PHYS_ADDR		0x14002700
-#define	IC0_PHYS_ADDR		0x10400000
-#define	IC1_PHYS_ADDR		0x11800000
-#define	AC97_PHYS_ADDR		0x10000000
 #define	USBH_PHYS_ADDR		0x10100000
-#define	USBD_PHYS_ADDR		0x10200000
 #define	IRDA_PHYS_ADDR		0x10300000
-#define	MAC0_PHYS_ADDR		0x10500000
-#define	MAC1_PHYS_ADDR		0x10510000
-#define	MACEN_PHYS_ADDR		0x10520000
-#define	MACDMA0_PHYS_ADDR	0x14004000
-#define	MACDMA1_PHYS_ADDR	0x14004200
-#define	I2S_PHYS_ADDR		0x11000000
-#define	UART0_PHYS_ADDR		0x11100000
-#define	UART1_PHYS_ADDR		0x11200000
-#define	UART2_PHYS_ADDR		0x11300000
-#define	UART3_PHYS_ADDR		0x11400000
 #define	SSI0_PHYS_ADDR		0x11600000
 #define	SSI1_PHYS_ADDR		0x11680000
-#define	SYS_PHYS_ADDR		0x11900000
 #define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
 #define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
 #define PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL
@@ -672,30 +729,8 @@ enum soc_au1200_ints {
 #ifdef CONFIG_SOC_AU1500
 #define	MEM_PHYS_ADDR		0x14000000
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	DMA0_PHYS_ADDR		0x14002000
-#define	DMA1_PHYS_ADDR		0x14002100
-#define	DMA2_PHYS_ADDR		0x14002200
-#define	DMA3_PHYS_ADDR		0x14002300
-#define	DMA4_PHYS_ADDR		0x14002400
-#define	DMA5_PHYS_ADDR		0x14002500
-#define	DMA6_PHYS_ADDR		0x14002600
-#define	DMA7_PHYS_ADDR		0x14002700
-#define	IC0_PHYS_ADDR		0x10400000
-#define	IC1_PHYS_ADDR		0x11800000
-#define	AC97_PHYS_ADDR		0x10000000
 #define	USBH_PHYS_ADDR		0x10100000
-#define	USBD_PHYS_ADDR		0x10200000
 #define PCI_PHYS_ADDR		0x14005000
-#define	MAC0_PHYS_ADDR		0x11500000
-#define	MAC1_PHYS_ADDR		0x11510000
-#define	MACEN_PHYS_ADDR		0x11520000
-#define	MACDMA0_PHYS_ADDR	0x14004000
-#define	MACDMA1_PHYS_ADDR	0x14004200
-#define	I2S_PHYS_ADDR		0x11000000
-#define	UART0_PHYS_ADDR		0x11100000
-#define	UART3_PHYS_ADDR		0x11400000
-#define GPIO2_PHYS_ADDR		0x11700000
-#define	SYS_PHYS_ADDR		0x11900000
 #define PCI_MEM_PHYS_ADDR	0x400000000ULL
 #define PCI_IO_PHYS_ADDR	0x500000000ULL
 #define PCI_CONFIG0_PHYS_ADDR	0x600000000ULL
@@ -710,34 +745,10 @@ enum soc_au1200_ints {
 #ifdef CONFIG_SOC_AU1100
 #define	MEM_PHYS_ADDR		0x14000000
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	DMA0_PHYS_ADDR		0x14002000
-#define	DMA1_PHYS_ADDR		0x14002100
-#define	DMA2_PHYS_ADDR		0x14002200
-#define	DMA3_PHYS_ADDR		0x14002300
-#define	DMA4_PHYS_ADDR		0x14002400
-#define	DMA5_PHYS_ADDR		0x14002500
-#define	DMA6_PHYS_ADDR		0x14002600
-#define	DMA7_PHYS_ADDR		0x14002700
-#define	IC0_PHYS_ADDR		0x10400000
-#define SD0_PHYS_ADDR		0x10600000
-#define SD1_PHYS_ADDR		0x10680000
-#define	IC1_PHYS_ADDR		0x11800000
-#define	AC97_PHYS_ADDR		0x10000000
 #define	USBH_PHYS_ADDR		0x10100000
-#define	USBD_PHYS_ADDR		0x10200000
 #define	IRDA_PHYS_ADDR		0x10300000
-#define	MAC0_PHYS_ADDR		0x10500000
-#define	MACEN_PHYS_ADDR		0x10520000
-#define	MACDMA0_PHYS_ADDR	0x14004000
-#define	MACDMA1_PHYS_ADDR	0x14004200
-#define	I2S_PHYS_ADDR		0x11000000
-#define	UART0_PHYS_ADDR		0x11100000
-#define	UART1_PHYS_ADDR		0x11200000
-#define	UART3_PHYS_ADDR		0x11400000
 #define	SSI0_PHYS_ADDR		0x11600000
 #define	SSI1_PHYS_ADDR		0x11680000
-#define GPIO2_PHYS_ADDR		0x11700000
-#define	SYS_PHYS_ADDR		0x11900000
 #define LCD_PHYS_ADDR		0x15000000
 #define PCMCIA_IO_PHYS_ADDR	0xF00000000ULL
 #define PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL
@@ -749,22 +760,8 @@ enum soc_au1200_ints {
 #ifdef CONFIG_SOC_AU1550
 #define	MEM_PHYS_ADDR		0x14000000
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
-#define	IC0_PHYS_ADDR		0x10400000
-#define	IC1_PHYS_ADDR		0x11800000
 #define	USBH_PHYS_ADDR		0x14020000
-#define	USBD_PHYS_ADDR		0x10200000
 #define PCI_PHYS_ADDR		0x14005000
-#define	MAC0_PHYS_ADDR		0x10500000
-#define	MAC1_PHYS_ADDR		0x10510000
-#define	MACEN_PHYS_ADDR		0x10520000
-#define	MACDMA0_PHYS_ADDR	0x14004000
-#define	MACDMA1_PHYS_ADDR	0x14004200
-#define	UART0_PHYS_ADDR		0x11100000
-#define	UART1_PHYS_ADDR		0x11200000
-#define	UART3_PHYS_ADDR		0x11400000
-#define GPIO2_PHYS_ADDR		0x11700000
-#define	SYS_PHYS_ADDR		0x11900000
-#define	DDMA_PHYS_ADDR		0x14002000
 #define PE_PHYS_ADDR		0x14008000
 #define PSC0_PHYS_ADDR		0x11A00000
 #define PSC1_PHYS_ADDR		0x11B00000
@@ -786,19 +783,10 @@ enum soc_au1200_ints {
 #define	STATIC_MEM_PHYS_ADDR	0x14001000
 #define AES_PHYS_ADDR		0x10300000
 #define CIM_PHYS_ADDR		0x14004000
-#define	IC0_PHYS_ADDR		0x10400000
-#define	IC1_PHYS_ADDR		0x11800000
 #define USBM_PHYS_ADDR		0x14020000
 #define	USBH_PHYS_ADDR		0x14020100
-#define	UART0_PHYS_ADDR		0x11100000
-#define	UART1_PHYS_ADDR		0x11200000
-#define GPIO2_PHYS_ADDR		0x11700000
-#define	SYS_PHYS_ADDR		0x11900000
-#define	DDMA_PHYS_ADDR		0x14002000
 #define PSC0_PHYS_ADDR	 	0x11A00000
 #define PSC1_PHYS_ADDR	 	0x11B00000
-#define SD0_PHYS_ADDR		0x10600000
-#define SD1_PHYS_ADDR		0x10680000
 #define LCD_PHYS_ADDR		0x15000000
 #define SWCNT_PHYS_ADDR		0x1110010C
 #define MAEFE_PHYS_ADDR		0x14012000
@@ -835,183 +823,43 @@ enum soc_au1200_ints {
 #endif
 
 
-/* Interrupt Controller register offsets */
-#define IC_CFG0RD		0x40
-#define IC_CFG0SET		0x40
-#define IC_CFG0CLR		0x44
-#define IC_CFG1RD		0x48
-#define IC_CFG1SET		0x48
-#define IC_CFG1CLR		0x4C
-#define IC_CFG2RD		0x50
-#define IC_CFG2SET		0x50
-#define IC_CFG2CLR		0x54
-#define IC_REQ0INT		0x54
-#define IC_SRCRD		0x58
-#define IC_SRCSET		0x58
-#define IC_SRCCLR		0x5C
-#define IC_REQ1INT		0x5C
-#define IC_ASSIGNRD		0x60
-#define IC_ASSIGNSET		0x60
-#define IC_ASSIGNCLR		0x64
-#define IC_WAKERD		0x68
-#define IC_WAKESET		0x68
-#define IC_WAKECLR		0x6C
-#define IC_MASKRD		0x70
-#define IC_MASKSET		0x70
-#define IC_MASKCLR		0x74
-#define IC_RISINGRD		0x78
-#define IC_RISINGCLR		0x78
-#define IC_FALLINGRD		0x7C
-#define IC_FALLINGCLR		0x7C
-#define IC_TESTBIT		0x80
-
-
-/* Interrupt Controller 0 */
-#define IC0_CFG0RD		0xB0400040
-#define IC0_CFG0SET		0xB0400040
-#define IC0_CFG0CLR		0xB0400044
-
-#define IC0_CFG1RD		0xB0400048
-#define IC0_CFG1SET		0xB0400048
-#define IC0_CFG1CLR		0xB040004C
-
-#define IC0_CFG2RD		0xB0400050
-#define IC0_CFG2SET		0xB0400050
-#define IC0_CFG2CLR		0xB0400054
-
-#define IC0_REQ0INT		0xB0400054
-#define IC0_SRCRD		0xB0400058
-#define IC0_SRCSET		0xB0400058
-#define IC0_SRCCLR		0xB040005C
-#define IC0_REQ1INT		0xB040005C
-
-#define IC0_ASSIGNRD		0xB0400060
-#define IC0_ASSIGNSET		0xB0400060
-#define IC0_ASSIGNCLR		0xB0400064
-
-#define IC0_WAKERD		0xB0400068
-#define IC0_WAKESET		0xB0400068
-#define IC0_WAKECLR		0xB040006C
-
-#define IC0_MASKRD		0xB0400070
-#define IC0_MASKSET		0xB0400070
-#define IC0_MASKCLR		0xB0400074
-
-#define IC0_RISINGRD		0xB0400078
-#define IC0_RISINGCLR		0xB0400078
-#define IC0_FALLINGRD		0xB040007C
-#define IC0_FALLINGCLR		0xB040007C
-
-#define IC0_TESTBIT		0xB0400080
-
-/* Interrupt Controller 1 */
-#define IC1_CFG0RD		0xB1800040
-#define IC1_CFG0SET		0xB1800040
-#define IC1_CFG0CLR		0xB1800044
-
-#define IC1_CFG1RD		0xB1800048
-#define IC1_CFG1SET		0xB1800048
-#define IC1_CFG1CLR		0xB180004C
-
-#define IC1_CFG2RD		0xB1800050
-#define IC1_CFG2SET		0xB1800050
-#define IC1_CFG2CLR		0xB1800054
-
-#define IC1_REQ0INT		0xB1800054
-#define IC1_SRCRD		0xB1800058
-#define IC1_SRCSET		0xB1800058
-#define IC1_SRCCLR		0xB180005C
-#define IC1_REQ1INT		0xB180005C
-
-#define IC1_ASSIGNRD            0xB1800060
-#define IC1_ASSIGNSET           0xB1800060
-#define IC1_ASSIGNCLR           0xB1800064
-
-#define IC1_WAKERD		0xB1800068
-#define IC1_WAKESET		0xB1800068
-#define IC1_WAKECLR		0xB180006C
-
-#define IC1_MASKRD		0xB1800070
-#define IC1_MASKSET		0xB1800070
-#define IC1_MASKCLR		0xB1800074
-
-#define IC1_RISINGRD		0xB1800078
-#define IC1_RISINGCLR		0xB1800078
-#define IC1_FALLINGRD		0xB180007C
-#define IC1_FALLINGCLR		0xB180007C
-
-#define IC1_TESTBIT		0xB1800080
 
 
 /* Au1000 */
 #ifdef CONFIG_SOC_AU1000
 
-#define UART0_ADDR		0xB1100000
-#define UART3_ADDR		0xB1400000
-
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017FFFC
 #define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
-
-#define AU1000_ETH0_BASE	0xB0500000
-#define AU1000_ETH1_BASE	0xB0510000
-#define AU1000_MAC0_ENABLE	0xB0520000
-#define AU1000_MAC1_ENABLE	0xB0520004
-#define NUM_ETH_INTERFACES 2
 #endif /* CONFIG_SOC_AU1000 */
 
 /* Au1500 */
 #ifdef CONFIG_SOC_AU1500
 
-#define UART0_ADDR		0xB1100000
-#define UART3_ADDR		0xB1400000
-
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017fffc
 #define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
-
-#define AU1500_ETH0_BASE	0xB1500000
-#define AU1500_ETH1_BASE	0xB1510000
-#define AU1500_MAC0_ENABLE	0xB1520000
-#define AU1500_MAC1_ENABLE	0xB1520004
-#define NUM_ETH_INTERFACES 2
 #endif /* CONFIG_SOC_AU1500 */
 
 /* Au1100 */
 #ifdef CONFIG_SOC_AU1100
 
-#define UART0_ADDR		0xB1100000
-#define UART3_ADDR		0xB1400000
-
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017FFFC
 #define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
-
-#define AU1100_ETH0_BASE	0xB0500000
-#define AU1100_MAC0_ENABLE	0xB0520000
-#define NUM_ETH_INTERFACES 1
 #endif /* CONFIG_SOC_AU1100 */
 
 #ifdef CONFIG_SOC_AU1550
-#define UART0_ADDR		0xB1100000
 
 #define USB_OHCI_BASE		0x14020000	/* phys addr for ioremap */
 #define USB_OHCI_LEN		0x00060000
 #define USB_HOST_CONFIG 	0xB4027ffc
 #define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
-
-#define AU1550_ETH0_BASE	0xB0500000
-#define AU1550_ETH1_BASE	0xB0510000
-#define AU1550_MAC0_ENABLE	0xB0520000
-#define AU1550_MAC1_ENABLE	0xB0520004
-#define NUM_ETH_INTERFACES 2
 #endif /* CONFIG_SOC_AU1550 */
 
 
 #ifdef CONFIG_SOC_AU1200
 
-#define UART0_ADDR		0xB1100000
-
 #define USB_UOC_BASE		0x14020020
 #define USB_UOC_LEN		0x20
 #define USB_OHCI_BASE		0x14020100
@@ -1504,22 +1352,6 @@ enum soc_au1200_ints {
 #define SYS_PINFUNC_S1B 	(1 << 2)
 #endif
 
-#define SYS_TRIOUTRD		0xB1900100
-#define SYS_TRIOUTCLR		0xB1900100
-#define SYS_OUTPUTRD		0xB1900108
-#define SYS_OUTPUTSET		0xB1900108
-#define SYS_OUTPUTCLR		0xB190010C
-#define SYS_PINSTATERD		0xB1900110
-#define SYS_PININPUTEN		0xB1900110
-
-/* GPIO2, Au1500, Au1550 only */
-#define GPIO2_BASE		0xB1700000
-#define GPIO2_DIR		(GPIO2_BASE + 0)
-#define GPIO2_OUTPUT		(GPIO2_BASE + 8)
-#define GPIO2_PINSTATE		(GPIO2_BASE + 0xC)
-#define GPIO2_INTENABLE 	(GPIO2_BASE + 0x10)
-#define GPIO2_ENABLE		(GPIO2_BASE + 0x14)
-
 /* Power Management */
 #define SYS_SCRATCH0		0xB1900018
 #define SYS_SCRATCH1		0xB190001C
@@ -1635,12 +1467,6 @@ enum soc_au1200_ints {
 #  define AC97C_RS		(1 << 1)
 #  define AC97C_CE		(1 << 0)
 
-/* Secure Digital (SD) Controller */
-#define SD0_XMIT_FIFO	0xB0600000
-#define SD0_RECV_FIFO	0xB0600004
-#define SD1_XMIT_FIFO	0xB0680000
-#define SD1_RECV_FIFO	0xB0680004
-
 #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
 /* Au1500 PCI Controller */
 #define Au1500_CFG_BASE 	0xB4005000	/* virtual, KSEG1 addr */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
index c333b4e1cd4..59f5b55b220 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -37,10 +37,6 @@
 
 #define NUM_AU1000_DMA_CHANNELS	8
 
-/* DMA Channel Base Addresses */
-#define DMA_CHANNEL_BASE	0xB4002000
-#define DMA_CHANNEL_LEN		0x00000100
-
 /* DMA Channel Register Offsets */
 #define DMA_MODE_SET		0x00000000
 #define DMA_MODE_READ		DMA_MODE_SET
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index c8a553a36ba..2fdacfe85e2 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -37,14 +37,6 @@
 
 #ifndef _LANGUAGE_ASSEMBLY
 
-/*
- * The DMA base addresses.
- * The channels are every 256 bytes (0x0100) from the channel 0 base.
- * Interrupt status/enable is bits 15:0 for channels 15 to zero.
- */
-#define DDMA_GLOBAL_BASE	0xb4003000
-#define DDMA_CHANNEL_BASE	0xb4002000
-
 typedef volatile struct dbdma_global {
 	u32	ddma_config;
 	u32	ddma_intstat;
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 62d2f136d94..1f41a522906 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -24,6 +24,23 @@
 
 #define MAKE_IRQ(intc, off)	(AU1000_INTC##intc##_INT_BASE + (off))
 
+/* GPIO1 registers within SYS_ area */
+#define SYS_TRIOUTRD		0x100
+#define SYS_TRIOUTCLR		0x100
+#define SYS_OUTPUTRD		0x108
+#define SYS_OUTPUTSET		0x108
+#define SYS_OUTPUTCLR		0x10C
+#define SYS_PINSTATERD		0x110
+#define SYS_PININPUTEN		0x110
+
+/* register offsets within GPIO2 block */
+#define GPIO2_DIR		0x00
+#define GPIO2_OUTPUT		0x08
+#define GPIO2_PINSTATE		0x0C
+#define GPIO2_INTENABLE		0x10
+#define GPIO2_ENABLE		0x14
+
+struct gpio;
 
 static inline int au1000_gpio1_to_irq(int gpio)
 {
@@ -200,23 +217,26 @@ static inline int au1200_irq_to_gpio(int irq)
  */
 static inline void alchemy_gpio1_set_value(int gpio, int v)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
 	unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR;
-	au_writel(mask, r);
-	au_sync();
+	__raw_writel(mask, base + r);
+	wmb();
 }
 
 static inline int alchemy_gpio1_get_value(int gpio)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
-	return au_readl(SYS_PINSTATERD) & mask;
+	return __raw_readl(base + SYS_PINSTATERD) & mask;
 }
 
 static inline int alchemy_gpio1_direction_input(int gpio)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
-	au_writel(mask, SYS_TRIOUTCLR);
-	au_sync();
+	__raw_writel(mask, base + SYS_TRIOUTCLR);
+	wmb();
 	return 0;
 }
 
@@ -257,27 +277,31 @@ static inline int alchemy_gpio1_to_irq(int gpio)
  */
 static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
-	unsigned long d = au_readl(GPIO2_DIR);
+	unsigned long d = __raw_readl(base + GPIO2_DIR);
+
 	if (to_out)
 		d |= mask;
 	else
 		d &= ~mask;
-	au_writel(d, GPIO2_DIR);
-	au_sync();
+	__raw_writel(d, base + GPIO2_DIR);
+	wmb();
 }
 
 static inline void alchemy_gpio2_set_value(int gpio, int v)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
 	unsigned long mask;
 	mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
-	au_writel(mask, GPIO2_OUTPUT);
-	au_sync();
+	__raw_writel(mask, base + GPIO2_OUTPUT);
+	wmb();
 }
 
 static inline int alchemy_gpio2_get_value(int gpio)
 {
-	return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
 }
 
 static inline int alchemy_gpio2_direction_input(int gpio)
@@ -329,21 +353,23 @@ static inline int alchemy_gpio2_to_irq(int gpio)
  */
 static inline void alchemy_gpio1_input_enable(void)
 {
-	au_writel(0, SYS_PININPUTEN);	/* the write op is key */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+	__raw_writel(0, base + SYS_PININPUTEN);	/* the write op is key */
+	wmb();
 }
 
 /* GPIO2 shared interrupts and control */
 
 static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
 {
-	unsigned long r = au_readl(GPIO2_INTENABLE);
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long r = __raw_readl(base + GPIO2_INTENABLE);
 	if (en)
 		r |= 1 << gpio2;
 	else
 		r &= ~(1 << gpio2);
-	au_writel(r, GPIO2_INTENABLE);
-	au_sync();
+	__raw_writel(r, base + GPIO2_INTENABLE);
+	wmb();
 }
 
 /**
@@ -418,10 +444,11 @@ static inline void alchemy_gpio2_disable_int(int gpio2)
  */
 static inline void alchemy_gpio2_enable(void)
 {
-	au_writel(3, GPIO2_ENABLE);	/* reset, clock enabled */
-	au_sync();
-	au_writel(1, GPIO2_ENABLE);	/* clock enabled */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(3, base + GPIO2_ENABLE);	/* reset, clock enabled */
+	wmb();
+	__raw_writel(1, base + GPIO2_ENABLE);	/* clock enabled */
+	wmb();
 }
 
 /**
@@ -431,8 +458,9 @@ static inline void alchemy_gpio2_enable(void)
  */
 static inline void alchemy_gpio2_disable(void)
 {
-	au_writel(2, GPIO2_ENABLE);	/* reset, clock disabled */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(2, base + GPIO2_ENABLE);	/* reset, clock disabled */
+	wmb();
 }
 
 /**********************************************************************/
@@ -556,6 +584,16 @@ static inline void gpio_set_value(int gpio, int v)
 	alchemy_gpio_set_value(gpio, v);
 }
 
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+	return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+}
+
 static inline int gpio_is_valid(int gpio)
 {
 	return alchemy_gpio_is_valid(gpio);
@@ -581,10 +619,50 @@ static inline int gpio_request(unsigned gpio, const char *label)
 	return 0;
 }
 
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
 static inline void gpio_free(unsigned gpio)
 {
 }
 
+static inline void gpio_free_array(struct gpio *array, size_t num)
+{
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+				   unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+
 #endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
 
 
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
index 9759588ba3c..184d5ecb5f5 100644
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -39,8 +39,16 @@ extern int nvram_getenv(char *name, char *val, size_t val_len);
 
 static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
 {
-	sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
-	       &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+	if (strchr(buf, ':'))
+		sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
+			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+			&macaddr[5]);
+	else if (strchr(buf, '-'))
+		sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
+			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+			&macaddr[5]);
+	else
+		printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
 }
 
 #endif
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
index 5325084d5c4..ed72e6a26b7 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
@@ -4,7 +4,7 @@
 #define TAGVER_LEN		4	/* Length of Tag Version */
 #define TAGLAYOUT_LEN		4	/* Length of FlashLayoutVer */
 #define SIG1_LEN		20	/* Company Signature 1 Length */
-#define SIG2_LEN		14	/* Company Signature 2 Lenght */
+#define SIG2_LEN		14	/* Company Signature 2 Length */
 #define BOARDID_LEN		16	/* Length of BoardId */
 #define ENDIANFLAG_LEN		2	/* Endian Flag Length */
 #define CHIPID_LEN		6	/* Chip Id Length */
@@ -88,7 +88,7 @@ struct bcm_tag {
 	char kernel_crc[CRC_LEN];
 	/* 228-235: Unused at present */
 	char reserved1[8];
-	/* 236-239: CRC32 of header excluding tagVersion */
+	/* 236-239: CRC32 of header excluding last 20 bytes */
 	char header_crc[CRC_LEN];
 	/* 240-255: Unused at present */
 	char reserved2[16];
diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
index 0b2b5eb22e9..dedef7d2b01 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
@@ -63,6 +63,11 @@
 	# CN30XX Disable instruction prefetching
 	or  v0, v0, 0x2000
 skip:
+	# First clear off CvmCtl[IPPCI] bit and move the performance
+	# counters interrupt to IRQ 6
+	li	v1, ~(7 << 7)
+	and	v0, v0, v1
+	ori	v0, v0, (6 << 7)
 	# Write the cavium control register
 	dmtc0   v0, CP0_CVMCTL_REG
 	sync
diff --git a/arch/mips/include/asm/mach-ip32/mc146818rtc.h b/arch/mips/include/asm/mach-ip32/mc146818rtc.h
index c28ba8d8407..6b6bab43d5c 100644
--- a/arch/mips/include/asm/mach-ip32/mc146818rtc.h
+++ b/arch/mips/include/asm/mach-ip32/mc146818rtc.h
@@ -26,7 +26,7 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
 }
 
 /*
- * FIXME: Do it right. For now just assume that noone lives in 20th century
+ * FIXME: Do it right. For now just assume that no one lives in 20th century
  * and no O2 user in 22th century ;-)
  */
 #define mc146818_decode_year(year) ((year) + 2000)
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
new file mode 100644
index 00000000000..ce2f02929d2
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
@@ -0,0 +1,63 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _LANTIQ_H__
+#define _LANTIQ_H__
+
+#include <linux/irq.h>
+
+/* generic reg access functions */
+#define ltq_r32(reg)		__raw_readl(reg)
+#define ltq_w32(val, reg)	__raw_writel(val, reg)
+#define ltq_w32_mask(clear, set, reg)	\
+	ltq_w32((ltq_r32(reg) & ~(clear)) | (set), reg)
+#define ltq_r8(reg)		__raw_readb(reg)
+#define ltq_w8(val, reg)	__raw_writeb(val, reg)
+
+/* register access macros for EBU and CGU */
+#define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
+#define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
+#define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
+#define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
+
+extern __iomem void *ltq_ebu_membase;
+extern __iomem void *ltq_cgu_membase;
+
+extern unsigned int ltq_get_cpu_ver(void);
+extern unsigned int ltq_get_soc_type(void);
+
+/* clock speeds */
+#define CLOCK_60M	60000000
+#define CLOCK_83M	83333333
+#define CLOCK_111M	111111111
+#define CLOCK_133M	133333333
+#define CLOCK_167M	166666667
+#define CLOCK_200M	200000000
+#define CLOCK_266M	266666666
+#define CLOCK_333M	333333333
+#define CLOCK_400M	400000000
+
+/* spinlock all ebu i/o */
+extern spinlock_t ebu_lock;
+
+/* some irq helpers */
+extern void ltq_disable_irq(struct irq_data *data);
+extern void ltq_mask_and_ack_irq(struct irq_data *data);
+extern void ltq_enable_irq(struct irq_data *data);
+
+/* find out what caused the last cpu reset */
+extern int ltq_reset_cause(void);
+#define LTQ_RST_CAUSE_WDTRST	0x20
+
+#define IOPORT_RESOURCE_START	0x10000000
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xffffffff
+#define LTQ_FLASH_START		0x10000000
+#define LTQ_FLASH_MAX		0x04000000
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
new file mode 100644
index 00000000000..a305f1d0259
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
@@ -0,0 +1,53 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_PLATFORM_H__
+#define _LANTIQ_PLATFORM_H__
+
+#include <linux/mtd/partitions.h>
+#include <linux/socket.h>
+
+/* struct used to pass info to the pci core */
+enum {
+	PCI_CLOCK_INT = 0,
+	PCI_CLOCK_EXT
+};
+
+#define PCI_EXIN0	0x0001
+#define PCI_EXIN1	0x0002
+#define PCI_EXIN2	0x0004
+#define PCI_EXIN3	0x0008
+#define PCI_EXIN4	0x0010
+#define PCI_EXIN5	0x0020
+#define PCI_EXIN_MAX	6
+
+#define PCI_GNT1	0x0040
+#define PCI_GNT2	0x0080
+#define PCI_GNT3	0x0100
+#define PCI_GNT4	0x0200
+
+#define PCI_REQ1	0x0400
+#define PCI_REQ2	0x0800
+#define PCI_REQ3	0x1000
+#define PCI_REQ4	0x2000
+#define PCI_REQ_SHIFT	10
+#define PCI_REQ_MASK	0xf
+
+struct ltq_pci_data {
+	int clock;
+	int gpio;
+	int irq[16];
+};
+
+/* struct used to pass info to network drivers */
+struct ltq_eth_data {
+	struct sockaddr mac;
+	int mii_mode;
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/war.h b/arch/mips/include/asm/mach-lantiq/war.h
new file mode 100644
index 00000000000..01b08ef368d
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/war.h
@@ -0,0 +1,24 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_MIPS_MACH_LANTIQ_WAR_H
+#define __ASM_MIPS_MACH_LANTIQ_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR     0
+#define R4600_V1_HIT_CACHEOP_WAR        0
+#define R4600_V2_HIT_CACHEOP_WAR        0
+#define R5432_CP0_INTERRUPT_WAR         0
+#define BCM1250_M3_WAR                  0
+#define SIBYTE_1956_WAR                 0
+#define MIPS4K_ICACHE_REFILL_WAR        0
+#define MIPS_CACHE_SYNC_WAR             0
+#define TX49XX_ICACHE_INDEX_INV_WAR     0
+#define RM9000_CDEX_SMP_WAR             0
+#define ICACHE_REFILLS_WORKAROUND_WAR   0
+#define R10000_LLSC_WAR                 0
+#define MIPS34K_MISSED_ITLB_WAR         0
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/irq.h b/arch/mips/include/asm/mach-lantiq/xway/irq.h
new file mode 100644
index 00000000000..a1471d2dd0d
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/irq.h
@@ -0,0 +1,18 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef __LANTIQ_IRQ_H
+#define __LANTIQ_IRQ_H
+
+#include <lantiq_irq.h>
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
new file mode 100644
index 00000000000..b4465a888e2
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
@@ -0,0 +1,66 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_XWAY_IRQ_H__
+#define _LANTIQ_XWAY_IRQ_H__
+
+#define INT_NUM_IRQ0		8
+#define INT_NUM_IM0_IRL0	(INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0	(INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM2_IRL0	(INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM3_IRL0	(INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM4_IRL0	(INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM_OFFSET	(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define LTQ_ASC_TIR(x)		(INT_NUM_IM3_IRL0 + (x * 8))
+#define LTQ_ASC_RIR(x)		(INT_NUM_IM3_IRL0 + (x * 8) + 1)
+#define LTQ_ASC_EIR(x)		(INT_NUM_IM3_IRL0 + (x * 8) + 2)
+
+#define LTQ_ASC_ASE_TIR		INT_NUM_IM2_IRL0
+#define LTQ_ASC_ASE_RIR		(INT_NUM_IM2_IRL0 + 2)
+#define LTQ_ASC_ASE_EIR		(INT_NUM_IM2_IRL0 + 3)
+
+#define LTQ_SSC_TIR		(INT_NUM_IM0_IRL0 + 15)
+#define LTQ_SSC_RIR		(INT_NUM_IM0_IRL0 + 14)
+#define LTQ_SSC_EIR		(INT_NUM_IM0_IRL0 + 16)
+
+#define LTQ_MEI_DYING_GASP_INT	(INT_NUM_IM1_IRL0 + 21)
+#define LTQ_MEI_INT		(INT_NUM_IM1_IRL0 + 23)
+
+#define LTQ_TIMER6_INT		(INT_NUM_IM1_IRL0 + 23)
+#define LTQ_USB_INT		(INT_NUM_IM1_IRL0 + 22)
+#define LTQ_USB_OC_INT		(INT_NUM_IM4_IRL0 + 23)
+
+#define MIPS_CPU_TIMER_IRQ		7
+
+#define LTQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)
+#define LTQ_DMA_CH1_INT		(INT_NUM_IM2_IRL0 + 1)
+#define LTQ_DMA_CH2_INT		(INT_NUM_IM2_IRL0 + 2)
+#define LTQ_DMA_CH3_INT		(INT_NUM_IM2_IRL0 + 3)
+#define LTQ_DMA_CH4_INT		(INT_NUM_IM2_IRL0 + 4)
+#define LTQ_DMA_CH5_INT		(INT_NUM_IM2_IRL0 + 5)
+#define LTQ_DMA_CH6_INT		(INT_NUM_IM2_IRL0 + 6)
+#define LTQ_DMA_CH7_INT		(INT_NUM_IM2_IRL0 + 7)
+#define LTQ_DMA_CH8_INT		(INT_NUM_IM2_IRL0 + 8)
+#define LTQ_DMA_CH9_INT		(INT_NUM_IM2_IRL0 + 9)
+#define LTQ_DMA_CH10_INT	(INT_NUM_IM2_IRL0 + 10)
+#define LTQ_DMA_CH11_INT	(INT_NUM_IM2_IRL0 + 11)
+#define LTQ_DMA_CH12_INT	(INT_NUM_IM2_IRL0 + 25)
+#define LTQ_DMA_CH13_INT	(INT_NUM_IM2_IRL0 + 26)
+#define LTQ_DMA_CH14_INT	(INT_NUM_IM2_IRL0 + 27)
+#define LTQ_DMA_CH15_INT	(INT_NUM_IM2_IRL0 + 28)
+#define LTQ_DMA_CH16_INT	(INT_NUM_IM2_IRL0 + 29)
+#define LTQ_DMA_CH17_INT	(INT_NUM_IM2_IRL0 + 30)
+#define LTQ_DMA_CH18_INT	(INT_NUM_IM2_IRL0 + 16)
+#define LTQ_DMA_CH19_INT	(INT_NUM_IM2_IRL0 + 21)
+
+#define LTQ_PPE_MBOX_INT	(INT_NUM_IM2_IRL0 + 24)
+
+#define INT_NUM_IM4_IRL14	(INT_NUM_IM4_IRL0 + 14)
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
new file mode 100644
index 00000000000..8a3c6be669d
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -0,0 +1,141 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_XWAY_H__
+#define _LTQ_XWAY_H__
+
+#ifdef CONFIG_SOC_TYPE_XWAY
+
+#include <lantiq.h>
+
+/* Chip IDs */
+#define SOC_ID_DANUBE1		0x129
+#define SOC_ID_DANUBE2		0x12B
+#define SOC_ID_TWINPASS		0x12D
+#define SOC_ID_AMAZON_SE	0x152
+#define SOC_ID_ARX188		0x16C
+#define SOC_ID_ARX168		0x16D
+#define SOC_ID_ARX182		0x16F
+
+/* SoC Types */
+#define SOC_TYPE_DANUBE		0x01
+#define SOC_TYPE_TWINPASS	0x02
+#define SOC_TYPE_AR9		0x03
+#define SOC_TYPE_VR9		0x04
+#define SOC_TYPE_AMAZON_SE	0x05
+
+/* ASC0/1 - serial port */
+#define LTQ_ASC0_BASE_ADDR	0x1E100400
+#define LTQ_ASC1_BASE_ADDR	0x1E100C00
+#define LTQ_ASC_SIZE		0x400
+
+/* RCU - reset control unit */
+#define LTQ_RCU_BASE_ADDR	0x1F203000
+#define LTQ_RCU_SIZE		0x1000
+
+/* GPTU - general purpose timer unit */
+#define LTQ_GPTU_BASE_ADDR	0x18000300
+#define LTQ_GPTU_SIZE		0x100
+
+/* EBU - external bus unit */
+#define LTQ_EBU_GPIO_START	0x14000000
+#define LTQ_EBU_GPIO_SIZE	0x1000
+
+#define LTQ_EBU_BASE_ADDR	0x1E105300
+#define LTQ_EBU_SIZE		0x100
+
+#define LTQ_EBU_BUSCON0		0x0060
+#define LTQ_EBU_PCC_CON		0x0090
+#define LTQ_EBU_PCC_IEN		0x00A4
+#define LTQ_EBU_PCC_ISTAT	0x00A0
+#define LTQ_EBU_BUSCON1		0x0064
+#define LTQ_EBU_ADDRSEL1	0x0024
+#define EBU_WRDIS		0x80000000
+
+/* CGU - clock generation unit */
+#define LTQ_CGU_BASE_ADDR	0x1F103000
+#define LTQ_CGU_SIZE		0x1000
+
+/* ICU - interrupt control unit */
+#define LTQ_ICU_BASE_ADDR	0x1F880200
+#define LTQ_ICU_SIZE		0x100
+
+/* EIU - external interrupt unit */
+#define LTQ_EIU_BASE_ADDR	0x1F101000
+#define LTQ_EIU_SIZE		0x1000
+
+/* PMU - power management unit */
+#define LTQ_PMU_BASE_ADDR	0x1F102000
+#define LTQ_PMU_SIZE		0x1000
+
+#define PMU_DMA			0x0020
+#define PMU_USB			0x8041
+#define PMU_LED			0x0800
+#define PMU_GPT			0x1000
+#define PMU_PPE			0x2000
+#define PMU_FPI			0x4000
+#define PMU_SWITCH		0x10000000
+
+/* ETOP - ethernet */
+#define LTQ_ETOP_BASE_ADDR	0x1E180000
+#define LTQ_ETOP_SIZE		0x40000
+
+/* DMA */
+#define LTQ_DMA_BASE_ADDR	0x1E104100
+#define LTQ_DMA_SIZE		0x800
+
+/* PCI */
+#define PCI_CR_BASE_ADDR	0x1E105400
+#define PCI_CR_SIZE		0x400
+
+/* WDT */
+#define LTQ_WDT_BASE_ADDR	0x1F8803F0
+#define LTQ_WDT_SIZE		0x10
+
+/* STP - serial to parallel conversion unit */
+#define LTQ_STP_BASE_ADDR	0x1E100BB0
+#define LTQ_STP_SIZE		0x40
+
+/* GPIO */
+#define LTQ_GPIO0_BASE_ADDR	0x1E100B10
+#define LTQ_GPIO1_BASE_ADDR	0x1E100B40
+#define LTQ_GPIO2_BASE_ADDR	0x1E100B70
+#define LTQ_GPIO_SIZE		0x30
+
+/* SSC */
+#define LTQ_SSC_BASE_ADDR	0x1e100800
+#define LTQ_SSC_SIZE		0x100
+
+/* MEI - dsl core */
+#define LTQ_MEI_BASE_ADDR	0x1E116000
+
+/* DEU - data encryption unit */
+#define LTQ_DEU_BASE_ADDR	0x1E103100
+
+/* MPS - multi processor unit (voice) */
+#define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
+#define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+
+/* request a non-gpio and set the PIO config */
+extern int  ltq_gpio_request(unsigned int pin, unsigned int alt0,
+	unsigned int alt1, unsigned int dir, const char *name);
+extern void ltq_pmu_enable(unsigned int module);
+extern void ltq_pmu_disable(unsigned int module);
+
+static inline int ltq_is_ar9(void)
+{
+	return (ltq_get_soc_type() == SOC_TYPE_AR9);
+}
+
+static inline int ltq_is_vr9(void)
+{
+	return (ltq_get_soc_type() == SOC_TYPE_VR9);
+}
+
+#endif /* CONFIG_SOC_TYPE_XWAY */
+#endif /* _LTQ_XWAY_H__ */
diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
new file mode 100644
index 00000000000..872943a4b90
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
@@ -0,0 +1,60 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License version 2 as published
+ *   by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef LTQ_DMA_H__
+#define LTQ_DMA_H__
+
+#define LTQ_DESC_SIZE		0x08	/* each descriptor is 64bit */
+#define LTQ_DESC_NUM		0x40	/* 64 descriptors / channel */
+
+#define LTQ_DMA_OWN		BIT(31)	/* owner bit */
+#define LTQ_DMA_C		BIT(30) /* complete bit */
+#define LTQ_DMA_SOP		BIT(29) /* start of packet */
+#define LTQ_DMA_EOP		BIT(28) /* end of packet */
+#define LTQ_DMA_TX_OFFSET(x)	((x & 0x1f) << 23) /* data bytes offset */
+#define LTQ_DMA_RX_OFFSET(x)	((x & 0x7) << 23) /* data bytes offset */
+#define LTQ_DMA_SIZE_MASK	(0xffff) /* the size field is 16 bit */
+
+struct ltq_dma_desc {
+	u32 ctl;
+	u32 addr;
+};
+
+struct ltq_dma_channel {
+	int nr;				/* the channel number */
+	int irq;			/* the mapped irq */
+	int desc;			/* the current descriptor */
+	struct ltq_dma_desc *desc_base;	/* the descriptor base */
+	int phys;			/* physical addr */
+};
+
+enum {
+	DMA_PORT_ETOP = 0,
+	DMA_PORT_DEU,
+};
+
+extern void ltq_dma_enable_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_disable_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_ack_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_open(struct ltq_dma_channel *ch);
+extern void ltq_dma_close(struct ltq_dma_channel *ch);
+extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch);
+extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch);
+extern void ltq_dma_free(struct ltq_dma_channel *ch);
+extern void ltq_dma_init_port(int p);
+
+#endif
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
index 021f77ca59e..2a8e2bb5d53 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
@@ -1,5 +1,5 @@
 /*
- * The header file of cs5536 sourth bridge.
+ * The header file of cs5536 south bridge.
  *
  * Copyright (C) 2007 Lemote, Inc.
  * Author : jlliu <liujl@lemote.com>
diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
new file mode 100644
index 00000000000..3b728275b9b
--- /dev/null
+++ b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_counter		1
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		1
+#define cpu_has_ejtag		1
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	1
+#define cpu_has_mips64r2	0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#endif /* __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-netlogic/irq.h b/arch/mips/include/asm/mach-netlogic/irq.h
new file mode 100644
index 00000000000..b5902458e7c
--- /dev/null
+++ b/arch/mips/include/asm/mach-netlogic/irq.h
@@ -0,0 +1,14 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems.
+ */
+#ifndef __ASM_NETLOGIC_IRQ_H
+#define __ASM_NETLOGIC_IRQ_H
+
+#define NR_IRQS			64
+#define MIPS_CPU_IRQ_BASE	0
+
+#endif /* __ASM_NETLOGIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-netlogic/war.h b/arch/mips/include/asm/mach-netlogic/war.h
new file mode 100644
index 00000000000..22da8932735
--- /dev/null
+++ b/arch/mips/include/asm/mach-netlogic/war.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems.
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_NLM_WAR_H
+#define __ASM_MIPS_MACH_NLM_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_NLM_WAR_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h
index 6d1ff9060e4..65059255dc1 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1000.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1000.h
@@ -1,5 +1,5 @@
 /*
- * Alchemy Semi Pb1000 Referrence Board
+ * Alchemy Semi Pb1000 Reference Board
  *
  * Copyright 2001, 2008 MontaVista Software Inc.
  * Author: MontaVista Software, Inc. <source@mvista.com>
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
index 962eb55dc88..fce4332ebb7 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1200.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -1,5 +1,5 @@
 /*
- * AMD Alchemy Pb1200 Referrence Board
+ * AMD Alchemy Pb1200 Reference Board
  * Board Registers defines.
  *
  * ########################################################################
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
index fc4d766641c..f835c88e959 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1550.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -1,5 +1,5 @@
 /*
- * AMD Alchemy Semi PB1550 Referrence Board
+ * AMD Alchemy Semi PB1550 Reference Board
  * Board Registers defines.
  *
  * Copyright 2004 Embedded Edge LLC.
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
index f76029c2406..a8e72cf1214 100644
--- a/arch/mips/include/asm/mach-powertv/dma-coherence.h
+++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h
@@ -48,7 +48,7 @@ static inline unsigned long virt_to_phys_from_pte(void *addr)
 				/* check for a valid page */
 				if (pte_present(pte)) {
 					/* get the physical address the page is
-					 * refering to */
+					 * referring to */
 					phys_addr = (unsigned long)
 						page_to_phys(pte_page(pte));
 					/* add the offset within the page */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 4d987097538..6a6f8a8f542 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -922,7 +922,7 @@ do {									\
 #define write_c0_config7(val)	__write_32bit_c0_register($16, 7, val)
 
 /*
- * The WatchLo register.  There may be upto 8 of them.
+ * The WatchLo register.  There may be up to 8 of them.
  */
 #define read_c0_watchlo0()	__read_ulong_c0_register($18, 0)
 #define read_c0_watchlo1()	__read_ulong_c0_register($18, 1)
@@ -942,7 +942,7 @@ do {									\
 #define write_c0_watchlo7(val)	__write_ulong_c0_register($18, 7, val)
 
 /*
- * The WatchHi register.  There may be upto 8 of them.
+ * The WatchHi register.  There may be up to 8 of them.
  */
 #define read_c0_watchhi0()	__read_32bit_c0_register($19, 0)
 #define read_c0_watchhi1()	__read_32bit_c0_register($19, 1)
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index d94085a3eaf..bc01a02cacd 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -118,6 +118,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "LOONGSON2 "
 #elif defined CONFIG_CPU_CAVIUM_OCTEON
 #define MODULE_PROC_FAMILY "OCTEON "
+#elif defined CONFIG_CPU_XLR
+#define MODULE_PROC_FAMILY "XLR "
 #else
 #error MODULE_PROC_FAMILY undefined for your processor configuration
 #endif
diff --git a/arch/mips/include/asm/netlogic/interrupt.h b/arch/mips/include/asm/netlogic/interrupt.h
new file mode 100644
index 00000000000..a85aadb6cfd
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/interrupt.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_INTERRUPT_H
+#define _ASM_NLM_INTERRUPT_H
+
+/* Defines for the IRQ numbers */
+
+#define IRQ_IPI_SMP_FUNCTION	3
+#define IRQ_IPI_SMP_RESCHEDULE	4
+#define IRQ_MSGRING		6
+#define IRQ_TIMER		7
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h
new file mode 100644
index 00000000000..8c53d0ba4bf
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/mips-extns.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_MIPS_EXTS_H
+#define _ASM_NLM_MIPS_EXTS_H
+
+/*
+ * XLR and XLP interrupt request and interrupt mask registers
+ */
+#define read_c0_eirr()		__read_64bit_c0_register($9, 6)
+#define read_c0_eimr()		__read_64bit_c0_register($9, 7)
+#define write_c0_eirr(val)	__write_64bit_c0_register($9, 6, val)
+
+/*
+ * Writing EIMR in 32 bit is a special case, the lower 8 bit of the
+ * EIMR is shadowed in the status register, so we cannot save and
+ * restore status register for split read.
+ */
+#define write_c0_eimr(val)						\
+do {									\
+	if (sizeof(unsigned long) == 4)	{				\
+		unsigned long __flags;					\
+									\
+		local_irq_save(__flags);				\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dsll\t%L0, %L0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
+			"or\t%L0, %L0, %M0\n\t"				\
+			"dmtc0\t%L0, $9, 7\n\t"				\
+			".set\tmips0"					\
+			: : "r" (val));					\
+		__flags = (__flags & 0xffff00ff) | (((val) & 0xff) << 8);\
+		local_irq_restore(__flags);				\
+	} else								\
+		__write_64bit_c0_register($9, 7, (val));		\
+} while (0)
+
+static inline int hard_smp_processor_id(void)
+{
+	return __read_32bit_c0_register($15, 1) & 0x3ff;
+}
+
+#endif /*_ASM_NLM_MIPS_EXTS_H */
diff --git a/arch/mips/include/asm/netlogic/psb-bootinfo.h b/arch/mips/include/asm/netlogic/psb-bootinfo.h
new file mode 100644
index 00000000000..6878307f0ee
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/psb-bootinfo.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NETLOGIC_BOOTINFO_H
+#define _ASM_NETLOGIC_BOOTINFO_H
+
+struct psb_info {
+	uint64_t boot_level;
+	uint64_t io_base;
+	uint64_t output_device;
+	uint64_t uart_print;
+	uint64_t led_output;
+	uint64_t init;
+	uint64_t exit;
+	uint64_t warm_reset;
+	uint64_t wakeup;
+	uint64_t online_cpu_map;
+	uint64_t master_reentry_sp;
+	uint64_t master_reentry_gp;
+	uint64_t master_reentry_fn;
+	uint64_t slave_reentry_fn;
+	uint64_t magic_dword;
+	uint64_t uart_putchar;
+	uint64_t size;
+	uint64_t uart_getchar;
+	uint64_t nmi_handler;
+	uint64_t psb_version;
+	uint64_t mac_addr;
+	uint64_t cpu_frequency;
+	uint64_t board_version;
+	uint64_t malloc;
+	uint64_t free;
+	uint64_t global_shmem_addr;
+	uint64_t global_shmem_size;
+	uint64_t psb_os_cpu_map;
+	uint64_t userapp_cpu_map;
+	uint64_t wakeup_os;
+	uint64_t psb_mem_map;
+	uint64_t board_major_version;
+	uint64_t board_minor_version;
+	uint64_t board_manf_revision;
+	uint64_t board_serial_number;
+	uint64_t psb_physaddr_map;
+	uint64_t xlr_loaderip_config;
+	uint64_t bldr_envp;
+	uint64_t avail_mem_map;
+};
+
+enum {
+	NETLOGIC_IO_SPACE = 0x10,
+	PCIX_IO_SPACE,
+	PCIX_CFG_SPACE,
+	PCIX_MEMORY_SPACE,
+	HT_IO_SPACE,
+	HT_CFG_SPACE,
+	HT_MEMORY_SPACE,
+	SRAM_SPACE,
+	FLASH_CONTROLLER_SPACE
+};
+
+#define NLM_MAX_ARGS	64
+#define NLM_MAX_ENVS	32
+
+/* This is what netlboot passes and linux boot_mem_map is subtly different */
+#define NLM_BOOT_MEM_MAP_MAX	32
+struct nlm_boot_mem_map {
+	int nr_map;
+	struct nlm_boot_mem_map_entry {
+		uint64_t addr;		/* start of memory segment */
+		uint64_t size;		/* size of memory segment */
+		uint32_t type;		/* type of memory segment */
+	} map[NLM_BOOT_MEM_MAP_MAX];
+};
+
+/* Pointer to saved boot loader info */
+extern struct psb_info nlm_prom_info;
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/gpio.h b/arch/mips/include/asm/netlogic/xlr/gpio.h
new file mode 100644
index 00000000000..51f6ad4aeb1
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/gpio.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_GPIO_H
+#define _ASM_NLM_GPIO_H
+
+#define NETLOGIC_GPIO_INT_EN_REG		0
+#define NETLOGIC_GPIO_INPUT_INVERSION_REG	1
+#define NETLOGIC_GPIO_IO_DIR_REG		2
+#define NETLOGIC_GPIO_IO_DATA_WR_REG		3
+#define NETLOGIC_GPIO_IO_DATA_RD_REG		4
+
+#define NETLOGIC_GPIO_SWRESET_REG		8
+#define NETLOGIC_GPIO_DRAM1_CNTRL_REG		9
+#define NETLOGIC_GPIO_DRAM1_RATIO_REG		10
+#define NETLOGIC_GPIO_DRAM1_RESET_REG		11
+#define NETLOGIC_GPIO_DRAM1_STATUS_REG		12
+#define NETLOGIC_GPIO_DRAM2_CNTRL_REG		13
+#define NETLOGIC_GPIO_DRAM2_RATIO_REG		14
+#define NETLOGIC_GPIO_DRAM2_RESET_REG		15
+#define NETLOGIC_GPIO_DRAM2_STATUS_REG		16
+
+#define NETLOGIC_GPIO_PWRON_RESET_CFG_REG	21
+#define NETLOGIC_GPIO_BIST_ALL_GO_STATUS_REG	24
+#define NETLOGIC_GPIO_BIST_CPU_GO_STATUS_REG	25
+#define NETLOGIC_GPIO_BIST_DEV_GO_STATUS_REG	26
+
+#define NETLOGIC_GPIO_FUSE_BANK_REG		35
+#define NETLOGIC_GPIO_CPU_RESET_REG		40
+#define NETLOGIC_GPIO_RNG_REG			43
+
+#define NETLOGIC_PWRON_RESET_PCMCIA_BOOT	17
+#define NETLOGIC_GPIO_LED_BITMAP	0x1700000
+#define NETLOGIC_GPIO_LED_0_SHIFT		20
+#define NETLOGIC_GPIO_LED_1_SHIFT		24
+
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_RESET	0x01
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_MAIN	0x04
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h
new file mode 100644
index 00000000000..2e3a4dd5304
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/iomap.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_IOMAP_H
+#define _ASM_NLM_IOMAP_H
+
+#define DEFAULT_NETLOGIC_IO_BASE           CKSEG1ADDR(0x1ef00000)
+#define NETLOGIC_IO_DDR2_CHN0_OFFSET       0x01000
+#define NETLOGIC_IO_DDR2_CHN1_OFFSET       0x02000
+#define NETLOGIC_IO_DDR2_CHN2_OFFSET       0x03000
+#define NETLOGIC_IO_DDR2_CHN3_OFFSET       0x04000
+#define NETLOGIC_IO_PIC_OFFSET             0x08000
+#define NETLOGIC_IO_UART_0_OFFSET          0x14000
+#define NETLOGIC_IO_UART_1_OFFSET          0x15100
+
+#define NETLOGIC_IO_SIZE                   0x1000
+
+#define NETLOGIC_IO_BRIDGE_OFFSET          0x00000
+
+#define NETLOGIC_IO_RLD2_CHN0_OFFSET       0x05000
+#define NETLOGIC_IO_RLD2_CHN1_OFFSET       0x06000
+
+#define NETLOGIC_IO_SRAM_OFFSET            0x07000
+
+#define NETLOGIC_IO_PCIX_OFFSET            0x09000
+#define NETLOGIC_IO_HT_OFFSET              0x0A000
+
+#define NETLOGIC_IO_SECURITY_OFFSET        0x0B000
+
+#define NETLOGIC_IO_GMAC_0_OFFSET          0x0C000
+#define NETLOGIC_IO_GMAC_1_OFFSET          0x0D000
+#define NETLOGIC_IO_GMAC_2_OFFSET          0x0E000
+#define NETLOGIC_IO_GMAC_3_OFFSET          0x0F000
+
+/* XLS devices */
+#define NETLOGIC_IO_GMAC_4_OFFSET          0x20000
+#define NETLOGIC_IO_GMAC_5_OFFSET          0x21000
+#define NETLOGIC_IO_GMAC_6_OFFSET          0x22000
+#define NETLOGIC_IO_GMAC_7_OFFSET          0x23000
+
+#define NETLOGIC_IO_PCIE_0_OFFSET          0x1E000
+#define NETLOGIC_IO_PCIE_1_OFFSET          0x1F000
+#define NETLOGIC_IO_SRIO_0_OFFSET          0x1E000
+#define NETLOGIC_IO_SRIO_1_OFFSET          0x1F000
+
+#define NETLOGIC_IO_USB_0_OFFSET           0x24000
+#define NETLOGIC_IO_USB_1_OFFSET           0x25000
+
+#define NETLOGIC_IO_COMP_OFFSET            0x1D000
+/* end XLS devices */
+
+/* XLR devices */
+#define NETLOGIC_IO_SPI4_0_OFFSET          0x10000
+#define NETLOGIC_IO_XGMAC_0_OFFSET         0x11000
+#define NETLOGIC_IO_SPI4_1_OFFSET          0x12000
+#define NETLOGIC_IO_XGMAC_1_OFFSET         0x13000
+/* end XLR devices */
+
+#define NETLOGIC_IO_I2C_0_OFFSET           0x16000
+#define NETLOGIC_IO_I2C_1_OFFSET           0x17000
+
+#define NETLOGIC_IO_GPIO_OFFSET            0x18000
+#define NETLOGIC_IO_FLASH_OFFSET           0x19000
+#define NETLOGIC_IO_TB_OFFSET              0x1C000
+
+#define NETLOGIC_CPLD_OFFSET               KSEG1ADDR(0x1d840000)
+
+/*
+ * Base Address (Virtual) of the PCI Config address space
+ * For now, choose 256M phys in kseg1 = 0xA0000000 + (1<<28)
+ * Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes
+ * ie 1<<24 = 16M
+ */
+#define DEFAULT_PCI_CONFIG_BASE         0x18000000
+#define DEFAULT_HT_TYPE0_CFG_BASE       0x16000000
+#define DEFAULT_HT_TYPE1_CFG_BASE       0x17000000
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+typedef volatile __u32 nlm_reg_t;
+extern unsigned long netlogic_io_base;
+
+/* FIXME read once in write_reg */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define netlogic_read_reg(base, offset)		((base)[(offset)])
+#define netlogic_write_reg(base, offset, value)	((base)[(offset)] = (value))
+#else
+#define netlogic_read_reg(base, offset)		(be32_to_cpu((base)[(offset)]))
+#define netlogic_write_reg(base, offset, value) \
+				((base)[(offset)] = cpu_to_be32((value)))
+#endif
+
+#define netlogic_read_reg_le32(base, offset) (le32_to_cpu((base)[(offset)]))
+#define netlogic_write_reg_le32(base, offset, value) \
+				((base)[(offset)] = cpu_to_le32((value)))
+#define netlogic_io_mmio(offset) ((nlm_reg_t *)(netlogic_io_base+(offset)))
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h
new file mode 100644
index 00000000000..5cceb746f08
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/pic.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_XLR_PIC_H
+#define _ASM_NLM_XLR_PIC_H
+
+#define PIC_CLKS_PER_SEC		66666666ULL
+/* PIC hardware interrupt numbers */
+#define PIC_IRT_WD_INDEX		0
+#define PIC_IRT_TIMER_0_INDEX		1
+#define PIC_IRT_TIMER_1_INDEX		2
+#define PIC_IRT_TIMER_2_INDEX		3
+#define PIC_IRT_TIMER_3_INDEX		4
+#define PIC_IRT_TIMER_4_INDEX		5
+#define PIC_IRT_TIMER_5_INDEX		6
+#define PIC_IRT_TIMER_6_INDEX		7
+#define PIC_IRT_TIMER_7_INDEX		8
+#define PIC_IRT_CLOCK_INDEX		PIC_IRT_TIMER_7_INDEX
+#define PIC_IRT_UART_0_INDEX		9
+#define PIC_IRT_UART_1_INDEX		10
+#define PIC_IRT_I2C_0_INDEX		11
+#define PIC_IRT_I2C_1_INDEX		12
+#define PIC_IRT_PCMCIA_INDEX		13
+#define PIC_IRT_GPIO_INDEX		14
+#define PIC_IRT_HYPER_INDEX		15
+#define PIC_IRT_PCIX_INDEX		16
+/* XLS */
+#define PIC_IRT_CDE_INDEX		15
+#define PIC_IRT_BRIDGE_TB_XLS_INDEX	16
+/* XLS */
+#define PIC_IRT_GMAC0_INDEX		17
+#define PIC_IRT_GMAC1_INDEX		18
+#define PIC_IRT_GMAC2_INDEX		19
+#define PIC_IRT_GMAC3_INDEX		20
+#define PIC_IRT_XGS0_INDEX		21
+#define PIC_IRT_XGS1_INDEX		22
+#define PIC_IRT_HYPER_FATAL_INDEX	23
+#define PIC_IRT_PCIX_FATAL_INDEX	24
+#define PIC_IRT_BRIDGE_AERR_INDEX	25
+#define PIC_IRT_BRIDGE_BERR_INDEX	26
+#define PIC_IRT_BRIDGE_TB_XLR_INDEX	27
+#define PIC_IRT_BRIDGE_AERR_NMI_INDEX	28
+/* XLS */
+#define PIC_IRT_GMAC4_INDEX		21
+#define PIC_IRT_GMAC5_INDEX		22
+#define PIC_IRT_GMAC6_INDEX		23
+#define PIC_IRT_GMAC7_INDEX		24
+#define PIC_IRT_BRIDGE_ERR_INDEX	25
+#define PIC_IRT_PCIE_LINK0_INDEX	26
+#define PIC_IRT_PCIE_LINK1_INDEX	27
+#define PIC_IRT_PCIE_LINK2_INDEX	23
+#define PIC_IRT_PCIE_LINK3_INDEX	24
+#define PIC_IRT_PCIE_XLSB0_LINK2_INDEX	28
+#define PIC_IRT_PCIE_XLSB0_LINK3_INDEX	29
+#define PIC_IRT_SRIO_LINK0_INDEX	26
+#define PIC_IRT_SRIO_LINK1_INDEX	27
+#define PIC_IRT_SRIO_LINK2_INDEX	28
+#define PIC_IRT_SRIO_LINK3_INDEX	29
+#define PIC_IRT_PCIE_INT_INDEX		28
+#define PIC_IRT_PCIE_FATAL_INDEX	29
+#define PIC_IRT_GPIO_B_INDEX		30
+#define PIC_IRT_USB_INDEX		31
+/* XLS */
+#define PIC_NUM_IRTS			32
+
+
+#define PIC_CLOCK_TIMER			7
+
+/* PIC Registers */
+#define PIC_CTRL			0x00
+#define PIC_IPI				0x04
+#define PIC_INT_ACK			0x06
+
+#define WD_MAX_VAL_0			0x08
+#define WD_MAX_VAL_1			0x09
+#define WD_MASK_0			0x0a
+#define WD_MASK_1			0x0b
+#define WD_HEARBEAT_0			0x0c
+#define WD_HEARBEAT_1			0x0d
+
+#define PIC_IRT_0_BASE			0x40
+#define PIC_IRT_1_BASE			0x80
+#define PIC_TIMER_MAXVAL_0_BASE		0x100
+#define PIC_TIMER_MAXVAL_1_BASE		0x110
+#define PIC_TIMER_COUNT_0_BASE		0x120
+#define PIC_TIMER_COUNT_1_BASE		0x130
+
+#define PIC_IRT_0(picintr)      (PIC_IRT_0_BASE + (picintr))
+#define PIC_IRT_1(picintr)	(PIC_IRT_1_BASE + (picintr))
+
+#define PIC_TIMER_MAXVAL_0(i)	(PIC_TIMER_MAXVAL_0_BASE + (i))
+#define PIC_TIMER_MAXVAL_1(i)	(PIC_TIMER_MAXVAL_1_BASE + (i))
+#define PIC_TIMER_COUNT_0(i)	(PIC_TIMER_COUNT_0_BASE + (i))
+#define PIC_TIMER_COUNT_1(i)	(PIC_TIMER_COUNT_0_BASE + (i))
+
+/*
+ * Mapping between hardware interrupt numbers and IRQs on CPU
+ * we use a simple scheme to map PIC interrupts 0-31 to IRQs
+ * 8-39. This leaves the IRQ 0-7 for cpu interrupts like
+ * count/compare and FMN
+ */
+#define PIC_IRQ_BASE            8
+#define PIC_INTR_TO_IRQ(i)      (PIC_IRQ_BASE + (i))
+#define PIC_IRQ_TO_INTR(i)      ((i) - PIC_IRQ_BASE)
+
+#define PIC_IRT_FIRST_IRQ	PIC_IRQ_BASE
+#define PIC_WD_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_WD_INDEX)
+#define PIC_TIMER_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_0_INDEX)
+#define PIC_TIMER_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_1_INDEX)
+#define PIC_TIMER_2_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_2_INDEX)
+#define PIC_TIMER_3_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_3_INDEX)
+#define PIC_TIMER_4_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_4_INDEX)
+#define PIC_TIMER_5_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_5_INDEX)
+#define PIC_TIMER_6_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_6_INDEX)
+#define PIC_TIMER_7_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_7_INDEX)
+#define PIC_CLOCK_IRQ		(PIC_TIMER_7_IRQ)
+#define PIC_UART_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_UART_0_INDEX)
+#define PIC_UART_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_UART_1_INDEX)
+#define PIC_I2C_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_I2C_0_INDEX)
+#define PIC_I2C_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_I2C_1_INDEX)
+#define PIC_PCMCIA_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_PCMCIA_INDEX)
+#define PIC_GPIO_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GPIO_INDEX)
+#define PIC_HYPER_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_HYPER_INDEX)
+#define PIC_PCIX_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_PCIX_INDEX)
+/* XLS */
+#define PIC_CDE_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_CDE_INDEX)
+#define PIC_BRIDGE_TB_XLS_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLS_INDEX)
+/* end XLS */
+#define PIC_GMAC_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC0_INDEX)
+#define PIC_GMAC_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC1_INDEX)
+#define PIC_GMAC_2_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC2_INDEX)
+#define PIC_GMAC_3_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC3_INDEX)
+#define PIC_XGS_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_XGS0_INDEX)
+#define PIC_XGS_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_XGS1_INDEX)
+#define PIC_HYPER_FATAL_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_HYPER_FATAL_INDEX)
+#define PIC_PCIX_FATAL_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIX_FATAL_INDEX)
+#define PIC_BRIDGE_AERR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_INDEX)
+#define PIC_BRIDGE_BERR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_BERR_INDEX)
+#define PIC_BRIDGE_TB_XLR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLR_INDEX)
+#define PIC_BRIDGE_AERR_NMI_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX)
+/* XLS defines */
+#define PIC_GMAC_4_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC4_INDEX)
+#define PIC_GMAC_5_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC5_INDEX)
+#define PIC_GMAC_6_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC6_INDEX)
+#define PIC_GMAC_7_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC7_INDEX)
+#define PIC_BRIDGE_ERR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_ERR_INDEX)
+#define PIC_PCIE_LINK0_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK0_INDEX)
+#define PIC_PCIE_LINK1_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK1_INDEX)
+#define PIC_PCIE_LINK2_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK2_INDEX)
+#define PIC_PCIE_LINK3_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK3_INDEX)
+#define PIC_PCIE_XLSB0_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK2_INDEX)
+#define PIC_PCIE_XLSB0_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK3_INDEX)
+#define PIC_SRIO_LINK0_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK0_INDEX)
+#define PIC_SRIO_LINK1_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK1_INDEX)
+#define PIC_SRIO_LINK2_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK2_INDEX)
+#define PIC_SRIO_LINK3_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK3_INDEX)
+#define PIC_PCIE_INT_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_INT__INDEX)
+#define PIC_PCIE_FATAL_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_FATAL_INDEX)
+#define PIC_GPIO_B_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GPIO_B_INDEX)
+#define PIC_USB_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_USB_INDEX)
+#define PIC_IRT_LAST_IRQ	PIC_USB_IRQ
+/* end XLS */
+
+#ifndef __ASSEMBLY__
+static inline void pic_send_ipi(u32 ipi)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+	netlogic_write_reg(mmio, PIC_IPI, ipi);
+}
+
+static inline u32 pic_read_control(void)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+	return netlogic_read_reg(mmio, PIC_CTRL);
+}
+
+static inline void pic_write_control(u32 control)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+	netlogic_write_reg(mmio, PIC_CTRL, control);
+}
+
+static inline void pic_update_control(u32 control)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+	netlogic_write_reg(mmio, PIC_CTRL,
+		(control | netlogic_read_reg(mmio, PIC_CTRL)));
+}
+
+#define PIC_IRQ_IS_EDGE_TRIGGERED(irq)	(((irq) >= PIC_TIMER_0_IRQ) && \
+					((irq) <= PIC_TIMER_7_IRQ))
+#define PIC_IRQ_IS_IRT(irq)		(((irq) >= PIC_IRT_FIRST_IRQ) && \
+					((irq) <= PIC_IRT_LAST_IRQ))
+#endif
+
+#endif /* _ASM_NLM_XLR_PIC_H */
diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h
new file mode 100644
index 00000000000..3e6372692a0
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/xlr.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_XLR_H
+#define _ASM_NLM_XLR_H
+
+/* Platform UART functions */
+struct uart_port;
+unsigned int nlm_xlr_uart_in(struct uart_port *, int);
+void nlm_xlr_uart_out(struct uart_port *, int, int);
+
+/* SMP support functions */
+struct irq_desc;
+void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc);
+void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc);
+int nlm_wakeup_secondary_cpus(u32 wakeup_mask);
+void nlm_smp_irq_init(void);
+void nlm_boot_smp_nmi(void);
+void prom_pre_boot_secondary_cpus(void);
+
+extern struct plat_smp_ops nlm_smp_ops;
+extern unsigned long nlm_common_ebase;
+
+/* XLS B silicon "Rook" */
+static inline unsigned int nlm_chip_is_xls_b(void)
+{
+	uint32_t prid = read_c0_prid();
+
+	return ((prid & 0xf000) == 0x4000);
+}
+
+/*
+ *  XLR chip types
+ */
+ /* The XLS product line has chip versions 0x[48c]? */
+static inline unsigned int nlm_chip_is_xls(void)
+{
+	uint32_t prid = read_c0_prid();
+
+	return ((prid & 0xf000) == 0x8000 || (prid & 0xf000) == 0x4000 ||
+		(prid & 0xf000) == 0xc000);
+}
+
+#endif /* _ASM_NLM_XLR_H */
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index f3c23a43f84..4e4c3a8282d 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -200,7 +200,7 @@ enum cvmx_chip_types_enum {
 	CVMX_CHIP_TYPE_MAX,
 };
 
-/* Compatability alias for NAC38 name change, planned to be removed
+/* Compatibility alias for NAC38 name change, planned to be removed
  * from SDK 1.7 */
 #define CVMX_BOARD_TYPE_NAO38	CVMX_BOARD_TYPE_NAC38
 
diff --git a/arch/mips/include/asm/octeon/cvmx-bootmem.h b/arch/mips/include/asm/octeon/cvmx-bootmem.h
index 8e708bdb43f..877845b84b1 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootmem.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootmem.h
@@ -67,7 +67,7 @@ struct cvmx_bootmem_block_header {
 
 /*
  * Structure for named memory blocks.  Number of descriptors available
- * can be changed without affecting compatiblity, but name length
+ * can be changed without affecting compatibility, but name length
  * changes require a bump in the bootmem descriptor version Note: This
  * structure must be naturally 64 bit aligned, as a single memory
  * image will be used by both 32 and 64 bit programs.
diff --git a/arch/mips/include/asm/octeon/cvmx-l2c.h b/arch/mips/include/asm/octeon/cvmx-l2c.h
index 0b32c5b118e..2c8ff9e33ec 100644
--- a/arch/mips/include/asm/octeon/cvmx-l2c.h
+++ b/arch/mips/include/asm/octeon/cvmx-l2c.h
@@ -157,7 +157,7 @@ enum cvmx_l2c_tad_event {
 
 /**
  * Configure one of the four L2 Cache performance counters to capture event
- * occurences.
+ * occurrences.
  *
  * @counter:        The counter to configure. Range 0..3.
  * @event:          The type of L2 Cache event occurrence to count.
diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
index 9d9381e2e3d..7e1286706d4 100644
--- a/arch/mips/include/asm/octeon/cvmx.h
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -151,7 +151,7 @@ enum cvmx_mips_space {
 #endif
 
 /**
- * Convert a memory pointer (void*) into a hardware compatable
+ * Convert a memory pointer (void*) into a hardware compatible
  * memory address (uint64_t). Octeon hardware widgets don't
  * understand logical addresses.
  *
diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h
index c2394f8b0fe..9ce5a1e7e14 100644
--- a/arch/mips/include/asm/paccess.h
+++ b/arch/mips/include/asm/paccess.h
@@ -7,7 +7,7 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  *
  * Protected memory access.  Used for everything that might take revenge
- * by sending a DBE error like accessing possibly non-existant memory or
+ * by sending a DBE error like accessing possibly non-existent memory or
  * devices.
  */
 #ifndef _ASM_PACCESS_H
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index f1f508e4f97..be44fb0266d 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -262,7 +262,7 @@ typedef volatile struct bridge_s {
 } bridge_t;
 
 /*
- * Field formats for Error Command Word and Auxillary Error Command Word
+ * Field formats for Error Command Word and Auxiliary Error Command Word
  * of bridge.
  */
 typedef struct bridge_err_cmdword_s {
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
index 60a5a38dd5b..7d41474e548 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
@@ -205,7 +205,7 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr)
  *   custom_read_reg32(address, tmp);	<-- Reads the address and put the value
  *						in the 'tmp' variable given
  *
- *	From here on out, you are (basicly) atomic, so don't do anything too
+ *	From here on out, you are (basically) atomic, so don't do anything too
  *	fancy!
  *	Also, this code may loop if the end of this block fails to write
  *	everything back safely due do the other CPU, so do NOT do anything
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index ead6928fa6b..c104f1039a6 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -337,7 +337,7 @@ unsigned long get_wchan(struct task_struct *p);
 /*
  * Return_address is a replacement for __builtin_return_address(count)
  * which on certain architectures cannot reasonably be implemented in GCC
- * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386).
+ * (MIPS, Alpha) or is unusable with -fomit-frame-pointer (i386).
  * Note that __builtin_return_address(x>=1) is forbidden because GCC
  * aborts compilation on some CPUs.  It's simply not possible to unwind
  * some CPU's stackframes.
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 9f1b8dba2c8..de39b1f343e 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -141,7 +141,8 @@ extern int ptrace_set_watch_regs(struct task_struct *child,
 #define instruction_pointer(regs) ((regs)->cp0_epc)
 #define profile_pc(regs) instruction_pointer(regs)
 
-extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+extern asmlinkage void syscall_trace_enter(struct pt_regs *regs);
+extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
 
 extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
 
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
index 57a971904cf..380347b648e 100644
--- a/arch/mips/include/asm/sgi/ioc.h
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -17,7 +17,7 @@
 #include <asm/sgi/pi1.h>
 
 /*
- * All registers are 8-bit wide alligned on 32-bit boundary. Bad things
+ * All registers are 8-bit wide aligned on 32-bit boundary. Bad things
  * happen if you try word access them. You have been warned.
  */
 
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
index 591b9061fd8..77f78728423 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mac.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -520,7 +520,7 @@
 #define G_MAC_RX_EOP_COUNTER(x)     _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER)
 
 /*
- * MAC Recieve Address Filter Exact Match Registers (Table 9-21)
+ * MAC Receive Address Filter Exact Match Registers (Table 9-21)
  * Registers: MAC_ADDR0_0 through MAC_ADDR7_0
  * Registers: MAC_ADDR0_1 through MAC_ADDR7_1
  * Registers: MAC_ADDR0_2 through MAC_ADDR7_2
@@ -538,7 +538,7 @@
 /* No bitfields */
 
 /*
- * MAC Recieve Address Filter Hash Match Registers (Table 9-22)
+ * MAC Receive Address Filter Hash Match Registers (Table 9-22)
  * Registers: MAC_HASH0_0 through MAC_HASH7_0
  * Registers: MAC_HASH0_1 through MAC_HASH7_1
  * Registers: MAC_HASH0_2 through MAC_HASH7_2
diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h
index 1ca64b4d33d..20ebeb875ee 100644
--- a/arch/mips/include/asm/siginfo.h
+++ b/arch/mips/include/asm/siginfo.h
@@ -101,7 +101,7 @@ typedef struct siginfo {
 
 /*
  * si_code values
- * Again these have been choosen to be IRIX compatible.
+ * Again these have been chosen to be IRIX compatible.
  */
 #undef SI_ASYNCIO
 #undef SI_TIMER
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
index 09e590daca1..fe02900b930 100644
--- a/arch/mips/include/asm/sn/klconfig.h
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -78,7 +78,7 @@ typedef s32 klconf_off_t;
  */
 #define MAX_SLOTS_PER_NODE	(1 + 2 + 6 + 2)
 
-/* XXX if each node is guranteed to have some memory */
+/* XXX if each node is guaranteed to have some memory */
 
 #define MAX_PCI_DEVS		8
 
@@ -539,7 +539,7 @@ typedef struct klinfo_s {                  /* Generic info */
 #define KLSTRUCT_IOC3_TTY 	24
 
 /* Early Access IO proms are compatible
-   only with KLSTRUCT values upto 24. */
+   only with KLSTRUCT values up to 24. */
 
 #define KLSTRUCT_FIBERCHANNEL 	25
 #define KLSTRUCT_MOD_SERIAL_NUM 26
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
index 31c76c021bb..46286d8302a 100644
--- a/arch/mips/include/asm/sn/sn0/hubio.h
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -622,7 +622,7 @@ typedef union h1_icrbb_u {
  */
 #define	IIO_ICRB_PROC0		0	/* Source of request is Proc 0 */
 #define	IIO_ICRB_PROC1		1	/* Source of request is Proc 1 */
-#define	IIO_ICRB_GB_REQ		2	/* Source is Guranteed BW request */
+#define	IIO_ICRB_GB_REQ		2	/* Source is Guaranteed BW request */
 #define	IIO_ICRB_IO_REQ		3	/* Source is Normal IO request	*/
 
 /*
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 58730c5ce4b..b4ba2449444 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -346,7 +346,7 @@
 		 * we can't dispatch it directly without trashing
 		 * some registers, so we'll try to detect this unlikely
 		 * case and program a software interrupt in the VPE,
-		 * as would be done for a cross-VPE IPI.  To accomodate
+		 * as would be done for a cross-VPE IPI.  To accommodate
 		 * the handling of that case, we're doing a DVPE instead
 		 * of just a DMT here to protect against other threads.
 		 * This is a lot of cruft to cover a tiny window.
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index d71160de4d1..97f8bf6639e 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -149,6 +149,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 
+/* work to do in syscall_trace_leave() */
+#define _TIF_WORK_SYSCALL_EXIT	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(0x0000ffef &				\
 					~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index c7f1bfef157..bc14447e69b 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -84,12 +84,6 @@ static inline int init_mips_clocksource(void)
 #endif
 }
 
-static inline void clocksource_set_clock(struct clocksource *cs,
-					 unsigned int clock)
-{
-	clocksource_calc_mult_shift(cs, clock, 4);
-}
-
 static inline void clockevent_set_clock(struct clock_event_device *cd,
 					unsigned int clock)
 {
diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h
index 22361d5e3bf..fa133c1bc1f 100644
--- a/arch/mips/include/asm/war.h
+++ b/arch/mips/include/asm/war.h
@@ -227,7 +227,7 @@
 #endif
 
 /*
- * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
+ * On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that
  * may cause ll / sc and lld / scd sequences to execute non-atomically.
  */
 #ifndef R10000_LLSC_WAR
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index 9ce9f64cb76..2d8e447cb82 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -211,7 +211,7 @@ EXPORT_SYMBOL(vdma_free);
  */
 int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size)
 {
-	int first, pages, npages;
+	int first, pages;
 
 	if (laddr > 0xffffff) {
 		if (vdma_debug)
@@ -228,8 +228,7 @@ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size)
 		return -EINVAL;	/* invalid physical address */
 	}
 
-	npages = pages =
-	    (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
+	pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1;
 	first = laddr >> 12;
 	if (vdma_debug)
 		printk("vdma_remap: first=%x, pages=%x\n", first, pages);
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index bc18daaa8f8..c3b04be3fb2 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
 };
 
 /* Early prototypes of the QI LB60 had only 1GB of NAND.
- * In order to support these devices aswell the partition and ecc layout is
+ * In order to support these devices as well the partition and ecc layout is
  * initialized depending on the NAND size */
 static struct mtd_partition qi_lb60_partitions_1gb[] = {
 	{
@@ -439,7 +439,7 @@ static struct platform_device *jz_platform_devices[] __initdata = {
 static void __init board_gpio_setup(void)
 {
 	/* We only need to enable/disable pullup here for pins used in generic
-	 * drivers. Everything else is done by the drivers themselfs. */
+	 * drivers. Everything else is done by the drivers themselves. */
 	jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N);
 	jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD);
 }
diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c
index 5ebe75a6835..d7feb898692 100644
--- a/arch/mips/jz4740/dma.c
+++ b/arch/mips/jz4740/dma.c
@@ -242,9 +242,7 @@ EXPORT_SYMBOL_GPL(jz4740_dma_get_residue);
 
 static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
 {
-	uint32_t status;
-
-	status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
+	(void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
 
 	jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
 		JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 6a9e14dab91..d97cfbf882f 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -1,5 +1,6 @@
 /*
  *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Copyright (C) 2011, Maarten ter Huurne <maarten@treewalker.org>
  *  JZ4740 setup code
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -14,13 +15,44 @@
  */
 
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 
+#include <asm/bootinfo.h>
+
+#include <asm/mach-jz4740/base.h>
+
 #include "reset.h"
 
+
+#define JZ4740_EMC_SDRAM_CTRL 0x80
+
+
+static void __init jz4740_detect_mem(void)
+{
+	void __iomem *jz_emc_base;
+	u32 ctrl, bus, bank, rows, cols;
+	phys_t size;
+
+	jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100);
+	ctrl = readl(jz_emc_base + JZ4740_EMC_SDRAM_CTRL);
+	bus = 2 - ((ctrl >> 31) & 1);
+	bank = 1 + ((ctrl >> 19) & 1);
+	cols = 8 + ((ctrl >> 26) & 7);
+	rows = 11 + ((ctrl >> 20) & 3);
+	printk(KERN_DEBUG
+		"SDRAM preconfigured: bus:%u bank:%u rows:%u cols:%u\n",
+		bus, bank, rows, cols);
+	iounmap(jz_emc_base);
+
+	size = 1 << (bus + bank + cols + rows);
+	add_memory_region(0, size, BOOT_MEM_RAM);
+}
+
 void __init plat_mem_setup(void)
 {
 	jz4740_reset_init();
+	jz4740_detect_mem();
 }
 
 const char *get_system_type(void)
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index fe01678d94f..f83c2dd07a2 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -89,7 +89,7 @@ static int jz4740_clockevent_set_next(unsigned long evt,
 
 static struct clock_event_device jz4740_clockevent = {
 	.name = "jz4740-timer",
-	.features = CLOCK_EVT_FEAT_PERIODIC,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event = jz4740_clockevent_set_next,
 	.set_mode = jz4740_clockevent_set_mode,
 	.rating = 200,
@@ -121,8 +121,7 @@ void __init plat_time_init(void)
 
 	clockevents_register_device(&jz4740_clockevent);
 
-	clocksource_set_clock(&jz4740_clocksource, clk_rate);
-	ret = clocksource_register(&jz4740_clocksource);
+	ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
 
 	if (ret)
 		printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c
index b2c01512905..654d5c3900b 100644
--- a/arch/mips/jz4740/timer.c
+++ b/arch/mips/jz4740/timer.c
@@ -27,11 +27,13 @@ void jz4740_timer_enable_watchdog(void)
 {
 	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
 }
+EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog);
 
 void jz4740_timer_disable_watchdog(void)
 {
 	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
 }
+EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog);
 
 void __init jz4740_timer_init(void)
 {
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index cedee2bcbd1..83bba332bbf 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_TX49XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= octeon_switch.o
+obj-$(CONFIG_CPU_XLR)		+= r4k_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 0b7377361e2..f0ab92a1b05 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -51,8 +51,7 @@ void __init txx9_clocksource_init(unsigned long baseaddr,
 {
 	struct txx9_tmr_reg __iomem *tmrptr;
 
-	clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
-	clocksource_register(&txx9_clocksource.cs);
+	clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
 
 	tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
 	__raw_writel(TCR_BASE, &tmrptr->tcr);
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index b8bb8ba6086..f305ca14351 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -73,7 +73,7 @@ static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
 		: "0" (5), "1" (8), "2" (5));
 	align_mod(align, mod);
 	/*
-	 * The trailing nop is needed to fullfill the two-instruction
+	 * The trailing nop is needed to fulfill the two-instruction
 	 * requirement between reading hi/lo and staring a mult/div.
 	 * Leaving it out may cause gas insert a nop itself breaking
 	 * the desired alignment of the next chunk.
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index f65d4c8c65a..bb133d10b14 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -291,6 +291,12 @@ static inline int cpu_has_confreg(void)
 #endif
 }
 
+static inline void set_elf_platform(int cpu, const char *plat)
+{
+	if (cpu == 0)
+		__elf_platform = plat;
+}
+
 /*
  * Get the FPU Implementation/Revision.
  */
@@ -614,6 +620,16 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 	case PRID_IMP_LOONGSON2:
 		c->cputype = CPU_LOONGSON2;
 		__cpu_name[cpu] = "ICT Loongson-2";
+
+		switch (c->processor_id & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON2E:
+			set_elf_platform(cpu, "loongson2e");
+			break;
+		case PRID_REV_LOONGSON2F:
+			set_elf_platform(cpu, "loongson2f");
+			break;
+		}
+
 		c->isa_level = MIPS_CPU_ISA_III;
 		c->options = R4K_OPTS |
 			     MIPS_CPU_FPU | MIPS_CPU_LLSC |
@@ -911,12 +927,14 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 	case PRID_IMP_BMIPS32_REV8:
 		c->cputype = CPU_BMIPS32;
 		__cpu_name[cpu] = "Broadcom BMIPS32";
+		set_elf_platform(cpu, "bmips32");
 		break;
 	case PRID_IMP_BMIPS3300:
 	case PRID_IMP_BMIPS3300_ALT:
 	case PRID_IMP_BMIPS3300_BUG:
 		c->cputype = CPU_BMIPS3300;
 		__cpu_name[cpu] = "Broadcom BMIPS3300";
+		set_elf_platform(cpu, "bmips3300");
 		break;
 	case PRID_IMP_BMIPS43XX: {
 		int rev = c->processor_id & 0xff;
@@ -925,15 +943,18 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 				rev <= PRID_REV_BMIPS4380_HI) {
 			c->cputype = CPU_BMIPS4380;
 			__cpu_name[cpu] = "Broadcom BMIPS4380";
+			set_elf_platform(cpu, "bmips4380");
 		} else {
 			c->cputype = CPU_BMIPS4350;
 			__cpu_name[cpu] = "Broadcom BMIPS4350";
+			set_elf_platform(cpu, "bmips4350");
 		}
 		break;
 	}
 	case PRID_IMP_BMIPS5000:
 		c->cputype = CPU_BMIPS5000;
 		__cpu_name[cpu] = "Broadcom BMIPS5000";
+		set_elf_platform(cpu, "bmips5000");
 		c->options |= MIPS_CPU_ULRI;
 		break;
 	}
@@ -956,14 +977,12 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_CAVIUM_OCTEON_PLUS;
 		__cpu_name[cpu] = "Cavium Octeon+";
 platform:
-		if (cpu == 0)
-			__elf_platform = "octeon";
+		set_elf_platform(cpu, "octeon");
 		break;
 	case PRID_IMP_CAVIUM_CN63XX:
 		c->cputype = CPU_CAVIUM_OCTEON2;
 		__cpu_name[cpu] = "Cavium Octeon II";
-		if (cpu == 0)
-			__elf_platform = "octeon2";
+		set_elf_platform(cpu, "octeon2");
 		break;
 	default:
 		printk(KERN_INFO "Unknown Octeon chip!\n");
@@ -988,6 +1007,59 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 	}
 }
 
+static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
+{
+	decode_configs(c);
+
+	c->options = (MIPS_CPU_TLB       |
+			MIPS_CPU_4KEX    |
+			MIPS_CPU_COUNTER |
+			MIPS_CPU_DIVEC   |
+			MIPS_CPU_WATCH   |
+			MIPS_CPU_EJTAG   |
+			MIPS_CPU_LLSC);
+
+	switch (c->processor_id & 0xff00) {
+	case PRID_IMP_NETLOGIC_XLR732:
+	case PRID_IMP_NETLOGIC_XLR716:
+	case PRID_IMP_NETLOGIC_XLR532:
+	case PRID_IMP_NETLOGIC_XLR308:
+	case PRID_IMP_NETLOGIC_XLR532C:
+	case PRID_IMP_NETLOGIC_XLR516C:
+	case PRID_IMP_NETLOGIC_XLR508C:
+	case PRID_IMP_NETLOGIC_XLR308C:
+		c->cputype = CPU_XLR;
+		__cpu_name[cpu] = "Netlogic XLR";
+		break;
+
+	case PRID_IMP_NETLOGIC_XLS608:
+	case PRID_IMP_NETLOGIC_XLS408:
+	case PRID_IMP_NETLOGIC_XLS404:
+	case PRID_IMP_NETLOGIC_XLS208:
+	case PRID_IMP_NETLOGIC_XLS204:
+	case PRID_IMP_NETLOGIC_XLS108:
+	case PRID_IMP_NETLOGIC_XLS104:
+	case PRID_IMP_NETLOGIC_XLS616B:
+	case PRID_IMP_NETLOGIC_XLS608B:
+	case PRID_IMP_NETLOGIC_XLS416B:
+	case PRID_IMP_NETLOGIC_XLS412B:
+	case PRID_IMP_NETLOGIC_XLS408B:
+	case PRID_IMP_NETLOGIC_XLS404B:
+		c->cputype = CPU_XLR;
+		__cpu_name[cpu] = "Netlogic XLS";
+		break;
+
+	default:
+		printk(KERN_INFO "Unknown Netlogic chip id [%02x]!\n",
+		       c->processor_id);
+		c->cputype = CPU_XLR;
+		break;
+	}
+
+	c->isa_level = MIPS_CPU_ISA_M64R1;
+	c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1;
+}
+
 #ifdef CONFIG_64BIT
 /* For use by uaccess.h */
 u64 __ua_limit;
@@ -1035,6 +1107,9 @@ __cpuinit void cpu_probe(void)
 	case PRID_COMP_INGENIC:
 		cpu_probe_ingenic(c, cpu);
 		break;
+	case PRID_COMP_NETLOGIC:
+		cpu_probe_netlogic(c, cpu);
+		break;
 	}
 
 	BUG_ON(!__cpu_name[cpu]);
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 51489f8a825..f96f99c794a 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -49,6 +49,5 @@ void __init sb1480_clocksource_init(void)
 
 	plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
 	zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
-	clocksource_set_clock(cs, zbbus);
-	clocksource_register(cs);
+	clocksource_register_hz(cs, zbbus);
 }
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 23da108506b..46bd7fa98d6 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -59,7 +59,5 @@ void __init dec_ioasic_clocksource_init(void)
 	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
 
 	clocksource_dec.rating = 200 + freq / 10000000;
-	clocksource_set_clock(&clocksource_dec, freq);
-
-	clocksource_register(&clocksource_dec);
+	clocksource_register_hz(&clocksource_dec, freq);
 }
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
index a27c16c8690..2e7c5232da8 100644
--- a/arch/mips/kernel/csrc-powertv.c
+++ b/arch/mips/kernel/csrc-powertv.c
@@ -78,9 +78,7 @@ static void __init powertv_c0_hpt_clocksource_init(void)
 
 	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 
-	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
-	clocksource_register(&clocksource_mips);
+	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
 }
 
 /**
@@ -130,43 +128,16 @@ static struct clocksource clocksource_tim_c = {
 /**
  * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
  *
- * The hard part here is coming up with a constant k and shift s such that
- * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
- * when shifted right by s, yields the corresponding number of nanoseconds.
  * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
- * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
- * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
- * done in 64 bits, avoiding an overflow means that k must be less than
- * 64 - 48 = 16 bits.
+ * 1 / (27,000,000/8) seconds.
  */
 static void __init powertv_tim_c_clocksource_init(void)
 {
-	int			prescale;
-	unsigned long		dividend;
-	unsigned long		k;
-	int			s;
-	const int		max_k_bits = (64 - 48) - 1;
-	const unsigned long	billion = 1000000000;
 	const unsigned long	counts_per_second = 27000000 / 8;
 
-	prescale = BITS_PER_LONG - ilog2(billion) - 1;
-	dividend = billion << prescale;
-	k = dividend / counts_per_second;
-	s = ilog2(k) - max_k_bits;
-
-	if (s < 0)
-		s = prescale;
-
-	else {
-		k >>= s;
-		s += prescale;
-	}
-
-	clocksource_tim_c.mult = k;
-	clocksource_tim_c.shift = s;
 	clocksource_tim_c.rating = 200;
 
-	clocksource_register(&clocksource_tim_c);
+	clocksource_register_hz(&clocksource_tim_c, counts_per_second);
 	tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
 }
 
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index e95a3cd48ee..decd1fa38d5 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -30,9 +30,7 @@ int __init init_r4k_clocksource(void)
 	/* Calculate a somewhat reasonable rating value */
 	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 
-	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
-	clocksource_register(&clocksource_mips);
+	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
 
 	return 0;
 }
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index d14d3d1907f..e9606d90768 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -65,6 +65,5 @@ void __init sb1250_clocksource_init(void)
 		     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
 						 R_SCD_TIMER_CFG)));
 
-	clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
-	clocksource_register(cs);
+	clocksource_register_hz(cs, V_SCD_TIMER_FREQ);
 }
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index ffa331029e0..37acfa036d4 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -167,14 +167,13 @@ work_notifysig:				# deal with pending signals and
 FEXPORT(syscall_exit_work_partial)
 	SAVE_STATIC
 syscall_exit_work:
-	li	t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t0, _TIF_WORK_SYSCALL_EXIT
 	and	t0, a2			# a2 is preloaded with TI_FLAGS
 	beqz	t0, work_pending	# trace bit set?
-	local_irq_enable		# could let do_syscall_trace()
+	local_irq_enable		# could let syscall_trace_leave()
 					# call schedule() instead
 	move	a0, sp
-	li	a1, 1
-	jal	do_syscall_trace
+	jal	syscall_trace_leave
 	b	resume_userspace
 
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT)
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 94ca2b018af..feb8021a305 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -23,6 +23,7 @@
 
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
+#define JUMP_RANGE_MASK ((1UL << 28) - 1)
 
 #define INSN_NOP 0x00000000	/* nop */
 #define INSN_JAL(addr)	\
@@ -44,12 +45,12 @@ static inline void ftrace_dyn_arch_init_insns(void)
 
 	/* jal (ftrace_caller + 8), jump over the first two instruction */
 	buf = (u32 *)&insn_jal_ftrace_caller;
-	uasm_i_jal(&buf, (FTRACE_ADDR + 8));
+	uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK);
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	/* j ftrace_graph_caller */
 	buf = (u32 *)&insn_j_ftrace_graph_caller;
-	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
+	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK);
 #endif
 }
 
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 2392a7a296d..391221b6a6a 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -125,87 +125,11 @@ void __init setup_pit_timer(void)
 	setup_irq(0, &irq0);
 }
 
-/*
- * Since the PIT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t pit_read(struct clocksource *cs)
-{
-	unsigned long flags;
-	int count;
-	u32 jifs;
-	static int old_count;
-	static u32 old_jifs;
-
-	raw_spin_lock_irqsave(&i8253_lock, flags);
-	/*
-	 * Although our caller may have the read side of xtime_lock,
-	 * this is now a seqlock, and we are cheating in this routine
-	 * by having side effects on state that we cannot undo if
-	 * there is a collision on the seqlock and our caller has to
-	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
-	 * jiffies as volatile despite the lock.  We read jiffies
-	 * before latching the timer count to guarantee that although
-	 * the jiffies value might be older than the count (that is,
-	 * the counter may underflow between the last point where
-	 * jiffies was incremented and the point where we latch the
-	 * count), it cannot be newer.
-	 */
-	jifs = jiffies;
-	outb_p(0x00, PIT_MODE);	/* latch the count ASAP */
-	count = inb_p(PIT_CH0);	/* read the latched count */
-	count |= inb_p(PIT_CH0) << 8;
-
-	/* VIA686a test code... reset the latch if count > max + 1 */
-	if (count > LATCH) {
-		outb_p(0x34, PIT_MODE);
-		outb_p(LATCH & 0xff, PIT_CH0);
-		outb(LATCH >> 8, PIT_CH0);
-		count = LATCH - 1;
-	}
-
-	/*
-	 * It's possible for count to appear to go the wrong way for a
-	 * couple of reasons:
-	 *
-	 *  1. The timer counter underflows, but we haven't handled the
-	 *     resulting interrupt and incremented jiffies yet.
-	 *  2. Hardware problem with the timer, not giving us continuous time,
-	 *     the counter does small "jumps" upwards on some Pentium systems,
-	 *     (see c't 95/10 page 335 for Neptun bug.)
-	 *
-	 * Previous attempts to handle these cases intelligently were
-	 * buggy, so we just do the simple thing now.
-	 */
-	if (count > old_count && jifs == old_jifs) {
-		count = old_count;
-	}
-	old_count = count;
-	old_jifs = jifs;
-
-	raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
-	count = (LATCH - 1) - count;
-
-	return (cycle_t)(jifs * LATCH) + count;
-}
-
-static struct clocksource clocksource_pit = {
-	.name	= "pit",
-	.rating = 110,
-	.read	= pit_read,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.mult	= 0,
-	.shift	= 20,
-};
-
 static int __init init_pit_clocksource(void)
 {
 	if (num_possible_cpus() > 1) /* PIT does not scale! */
 		return 0;
 
-	clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
-	return clocksource_register(&clocksource_pit);
+	return clocksource_i8253_init();
 }
 arch_initcall(init_pit_clocksource);
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index d9a7db78ed6..75266ff4cc3 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -721,7 +721,7 @@ static void mipsxx_pmu_start(void)
 
 /*
  * MIPS performance counters can be per-TC. The control registers can
- * not be directly accessed accross CPUs. Hence if we want to do global
+ * not be directly accessed across CPUs. Hence if we want to do global
  * control, we need cross CPU calls. on_each_cpu() can help us, but we
  * can not make sure this function is called with interrupts enabled. So
  * here we pause local counters and then grab a rwlock and leave the
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index ae167df73dd..d2112d3cf11 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -410,7 +410,7 @@ unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
 	if (!kallsyms_lookup_size_offset(pc, &size, &ofs))
 		return 0;
 	/*
-	 * Return ra if an exception occured at the first instruction
+	 * Return ra if an exception occurred at the first instruction
 	 */
 	if (unlikely(ofs == 0)) {
 		pc = *ra;
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index d21c388c011..4e6ea1ffad4 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -533,15 +533,10 @@ static inline int audit_arch(void)
  * Notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 {
 	/* do the secure computing check first */
-	if (!entryexit)
-		secure_computing(regs->regs[2]);
-
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
-		                   regs->regs[2]);
+	secure_computing(regs->regs[2]);
 
 	if (!(current->ptrace & PT_PTRACED))
 		goto out;
@@ -565,8 +560,40 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 	}
 
 out:
-	if (unlikely(current->audit_context) && !entryexit)
+	if (unlikely(current->audit_context))
 		audit_syscall_entry(audit_arch(), regs->regs[2],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 }
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+{
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]),
+		                   -regs->regs[2]);
+
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+
+	/* The 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
+	                         0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 7f5468b38d4..7a8e1dd7f6f 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -88,8 +88,7 @@ syscall_trace_entry:
 	SAVE_STATIC
 	move	s0, t2
 	move	a0, sp
-	li	a1, 0
-	jal	do_syscall_trace
+	jal	syscall_trace_enter
 
 	move	t0, s0
 	RESTORE_STATIC
@@ -565,7 +564,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_ioprio_get		2	/* 4315 */
 	sys	sys_utimensat		4
 	sys	sys_signalfd		3
-	sys	sys_ni_syscall		0
+	sys	sys_ni_syscall		0	/* was timerfd */
 	sys	sys_eventfd		1
 	sys	sys_fallocate		6	/* 4320 */
 	sys	sys_timerfd_create	2
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index a2e1fcbc41d..2d31c83224f 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -91,8 +91,7 @@ syscall_trace_entry:
 	SAVE_STATIC
 	move	s0, t2
 	move	a0, sp
-	li	a1, 0
-	jal	do_syscall_trace
+	jal	syscall_trace_enter
 
 	move	t0, s0
 	RESTORE_STATIC
@@ -404,7 +403,7 @@ sys_call_table:
 	PTR	sys_ioprio_get
 	PTR	sys_utimensat			/* 5275 */
 	PTR	sys_signalfd
-	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was timerfd */
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create		/* 5280 */
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index b2c7624995b..38a0503b9a4 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -89,8 +89,7 @@ n32_syscall_trace_entry:
 	SAVE_STATIC
 	move	s0, t2
 	move	a0, sp
-	li	a1, 0
-	jal	do_syscall_trace
+	jal	syscall_trace_enter
 
 	move	t0, s0
 	RESTORE_STATIC
@@ -403,7 +402,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_ioprio_get
 	PTR	compat_sys_utimensat
 	PTR	compat_sys_signalfd		/* 6280 */
-	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was timerfd */
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 049a9c8c49a..91ea5e4041d 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -123,8 +123,7 @@ trace_a_syscall:
 
 	move	s0, t2			# Save syscall pointer
 	move	a0, sp
-	li	a1, 0
-	jal	do_syscall_trace
+	jal	syscall_trace_enter
 
 	move	t0, s0
 	RESTORE_STATIC
@@ -522,7 +521,7 @@ sys_call_table:
 	PTR	sys_ioprio_get			/* 4315 */
 	PTR	compat_sys_utimensat
 	PTR	compat_sys_signalfd
-	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was timerfd */
 	PTR	sys_eventfd
 	PTR	sys32_fallocate			/* 4320 */
 	PTR	sys_timerfd_create
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index c0e81418ba2..1ec56e635d0 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -120,7 +120,7 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action)
 
 	local_irq_save(flags);
 
-	vpflags = dvpe();	/* cant access the other CPU's registers whilst MVPE enabled */
+	vpflags = dvpe();	/* can't access the other CPU's registers whilst MVPE enabled */
 
 	switch (action) {
 	case SMP_CALL_FUNCTION:
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 5a88cc4ccd5..cedac463374 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -929,7 +929,7 @@ static void post_direct_ipi(int cpu, struct smtc_ipi *pipi)
 
 static void ipi_resched_interrupt(void)
 {
-	/* Return from interrupt should be enough to cause scheduler check */
+	scheduler_ipi();
 }
 
 static void ipi_call_interrupt(void)
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 58beabf50b3..d02765708dd 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -10,12 +10,9 @@
 #include <linux/capability.h>
 #include <linux/errno.h>
 #include <linux/linkage.h>
-#include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/mman.h>
 #include <linux/ptrace.h>
-#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/syscalls.h>
 #include <linux/file.h>
@@ -25,11 +22,9 @@
 #include <linux/msg.h>
 #include <linux/shm.h>
 #include <linux/compiler.h>
-#include <linux/module.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
-#include <linux/random.h>
 #include <linux/elf.h>
 
 #include <asm/asm.h>
@@ -66,121 +61,6 @@ out:
 	return res;
 }
 
-unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
-
-EXPORT_SYMBOL(shm_align_mask);
-
-#define COLOUR_ALIGN(addr,pgoff)				\
-	((((addr) + shm_align_mask) & ~shm_align_mask) +	\
-	 (((pgoff) << PAGE_SHIFT) & shm_align_mask))
-
-unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
-	unsigned long len, unsigned long pgoff, unsigned long flags)
-{
-	struct vm_area_struct * vmm;
-	int do_color_align;
-	unsigned long task_size;
-
-#ifdef CONFIG_32BIT
-	task_size = TASK_SIZE;
-#else /* Must be CONFIG_64BIT*/
-	task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE;
-#endif
-
-	if (len > task_size)
-		return -ENOMEM;
-
-	if (flags & MAP_FIXED) {
-		/* Even MAP_FIXED mappings must reside within task_size.  */
-		if (task_size - len < addr)
-			return -EINVAL;
-
-		/*
-		 * We do not accept a shared mapping if it would violate
-		 * cache aliasing constraints.
-		 */
-		if ((flags & MAP_SHARED) &&
-		    ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
-			return -EINVAL;
-		return addr;
-	}
-
-	do_color_align = 0;
-	if (filp || (flags & MAP_SHARED))
-		do_color_align = 1;
-	if (addr) {
-		if (do_color_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-		else
-			addr = PAGE_ALIGN(addr);
-		vmm = find_vma(current->mm, addr);
-		if (task_size - len >= addr &&
-		    (!vmm || addr + len <= vmm->vm_start))
-			return addr;
-	}
-	addr = current->mm->mmap_base;
-	if (do_color_align)
-		addr = COLOUR_ALIGN(addr, pgoff);
-	else
-		addr = PAGE_ALIGN(addr);
-
-	for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {
-		/* At this point:  (!vmm || addr < vmm->vm_end). */
-		if (task_size - len < addr)
-			return -ENOMEM;
-		if (!vmm || addr + len <= vmm->vm_start)
-			return addr;
-		addr = vmm->vm_end;
-		if (do_color_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-	}
-}
-
-void arch_pick_mmap_layout(struct mm_struct *mm)
-{
-	unsigned long random_factor = 0UL;
-
-	if (current->flags & PF_RANDOMIZE) {
-		random_factor = get_random_int();
-		random_factor = random_factor << PAGE_SHIFT;
-		if (TASK_IS_32BIT_ADDR)
-			random_factor &= 0xfffffful;
-		else
-			random_factor &= 0xffffffful;
-	}
-
-	mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
-	mm->get_unmapped_area = arch_get_unmapped_area;
-	mm->unmap_area = arch_unmap_area;
-}
-
-static inline unsigned long brk_rnd(void)
-{
-	unsigned long rnd = get_random_int();
-
-	rnd = rnd << PAGE_SHIFT;
-	/* 8MB for 32bit, 256MB for 64bit */
-	if (TASK_IS_32BIT_ADDR)
-		rnd = rnd & 0x7ffffful;
-	else
-		rnd = rnd & 0xffffffful;
-
-	return rnd;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
-	unsigned long base = mm->brk;
-	unsigned long ret;
-
-	ret = PAGE_ALIGN(base + brk_rnd());
-
-	if (ret < mm->brk)
-		return mm->brk;
-
-	return ret;
-}
-
 SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
 	unsigned long, prot, unsigned long, flags, unsigned long,
 	fd, off_t, offset)
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index fb749740551..1083ad4e101 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -102,7 +102,7 @@ static __init int cpu_has_mfc0_count_bug(void)
 	case CPU_R4400SC:
 	case CPU_R4400MC:
 		/*
-		 * The published errata for the R4400 upto 3.0 say the CPU
+		 * The published errata for the R4400 up to 3.0 say the CPU
 		 * has the mfc0 from count bug.
 		 */
 		if ((current_cpu_data.processor_id & 0xff) <= 0x30)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 71350f7f2d8..e9b3af27d84 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -374,7 +374,8 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV);
+	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
+		sig = 0;
 
 	console_verbose();
 	spin_lock_irq(&die_lock);
@@ -383,9 +384,6 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 	mips_mt_regdump(dvpret);
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
-		sig = 0;
-
 	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	add_taint(TAINT_DIE);
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 832afbb8758..01af3876cf9 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -65,15 +65,18 @@ SECTIONS
 	NOTES :text :note
 	.dummy : { *(.dummy) } :text
 
+	_sdata = .;			/* Start of data section */
 	RODATA
 
 	/* writeable */
+	_sdata = .;				/* Start of data section */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 
 		INIT_TASK_DATA(PAGE_SIZE)
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+		READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
 		DATA_DATA
 		CONSTRUCTORS
 	}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index ab52b7cf3b6..dbb6b408f00 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -19,7 +19,7 @@
  * VPE support module
  *
  * Provides support for loading a MIPS SP program on VPE1.
- * The SP enviroment is rather simple, no tlb's.  It needs to be relocatable
+ * The SP environment is rather simple, no tlb's.  It needs to be relocatable
  * (or partially linked). You should initialise your stack in the startup
  * code. This loader looks for the symbol __start and sets up
  * execution to resume from there. The MIPS SDE kit contains suitable examples.
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
new file mode 100644
index 00000000000..3fccf210451
--- /dev/null
+++ b/arch/mips/lantiq/Kconfig
@@ -0,0 +1,23 @@
+if LANTIQ
+
+config SOC_TYPE_XWAY
+	bool
+	default n
+
+choice
+	prompt "SoC Type"
+	default SOC_XWAY
+
+config SOC_AMAZON_SE
+	bool "Amazon SE"
+	select SOC_TYPE_XWAY
+
+config SOC_XWAY
+	bool "XWAY"
+	select SOC_TYPE_XWAY
+	select HW_HAS_PCI
+endchoice
+
+source "arch/mips/lantiq/xway/Kconfig"
+
+endif
diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
new file mode 100644
index 00000000000..e5dae0e24b0
--- /dev/null
+++ b/arch/mips/lantiq/Makefile
@@ -0,0 +1,11 @@
+# Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+
+obj-y := irq.o setup.o clk.o prom.o devices.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform
new file mode 100644
index 00000000000..f3dff05722d
--- /dev/null
+++ b/arch/mips/lantiq/Platform
@@ -0,0 +1,8 @@
+#
+# Lantiq
+#
+
+platform-$(CONFIG_LANTIQ)	+= lantiq/
+cflags-$(CONFIG_LANTIQ)		+= -I$(srctree)/arch/mips/include/asm/mach-lantiq
+load-$(CONFIG_LANTIQ)		= 0xffffffff80002000
+cflags-$(CONFIG_SOC_TYPE_XWAY)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
new file mode 100644
index 00000000000..94560899d13
--- /dev/null
+++ b/arch/mips/lantiq/clk.c
@@ -0,0 +1,140 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/list.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+#include "clk.h"
+
+struct clk {
+	const char *name;
+	unsigned long rate;
+	unsigned long (*get_rate) (void);
+};
+
+static struct clk *cpu_clk;
+static int cpu_clk_cnt;
+
+/* lantiq socs have 3 static clocks */
+static struct clk cpu_clk_generic[] = {
+	{
+		.name = "cpu",
+		.get_rate = ltq_get_cpu_hz,
+	}, {
+		.name = "fpi",
+		.get_rate = ltq_get_fpi_hz,
+	}, {
+		.name = "io",
+		.get_rate = ltq_get_io_region_clock,
+	},
+};
+
+static struct resource ltq_cgu_resource = {
+	.name	= "cgu",
+	.start	= LTQ_CGU_BASE_ADDR,
+	.end	= LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+/* remapped clock register range */
+void __iomem *ltq_cgu_membase;
+
+void clk_init(void)
+{
+	cpu_clk = cpu_clk_generic;
+	cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+	return clk && !IS_ERR(clk);
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->get_rate != NULL)
+		return clk->get_rate();
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	int i;
+
+	for (i = 0; i < cpu_clk_cnt; i++)
+		if (!strcmp(id, cpu_clk[i].name))
+			return &cpu_clk[i];
+	BUG();
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	/* not used */
+}
+EXPORT_SYMBOL(clk_put);
+
+static inline u32 ltq_get_counter_resolution(void)
+{
+	u32 res;
+
+	__asm__ __volatile__(
+		".set   push\n"
+		".set   mips32r2\n"
+		"rdhwr  %0, $3\n"
+		".set pop\n"
+		: "=&r" (res)
+		: /* no input */
+		: "memory");
+
+	return res;
+}
+
+void __init plat_time_init(void)
+{
+	struct clk *clk;
+
+	if (insert_resource(&iomem_resource, &ltq_cgu_resource) < 0)
+		panic("Failed to insert cgu memory\n");
+
+	if (request_mem_region(ltq_cgu_resource.start,
+			resource_size(&ltq_cgu_resource), "cgu") < 0)
+		panic("Failed to request cgu memory\n");
+
+	ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start,
+				resource_size(&ltq_cgu_resource));
+	if (!ltq_cgu_membase) {
+		pr_err("Failed to remap cgu memory\n");
+		unreachable();
+	}
+	clk = clk_get(0, "cpu");
+	mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
+	write_c0_compare(read_c0_count());
+	clk_put(clk);
+}
diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
new file mode 100644
index 00000000000..3328925f2c3
--- /dev/null
+++ b/arch/mips/lantiq/clk.h
@@ -0,0 +1,18 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_CLK_H__
+#define _LTQ_CLK_H__
+
+extern void clk_init(void);
+
+extern unsigned long ltq_get_cpu_hz(void);
+extern unsigned long ltq_get_fpi_hz(void);
+extern unsigned long ltq_get_io_region_clock(void);
+
+#endif
diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
new file mode 100644
index 00000000000..7b82c34cb16
--- /dev/null
+++ b/arch/mips/lantiq/devices.c
@@ -0,0 +1,122 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/etherdevice.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+
+#include <lantiq_soc.h>
+
+#include "devices.h"
+
+/* nor flash */
+static struct resource ltq_nor_resource = {
+	.name	= "nor",
+	.start	= LTQ_FLASH_START,
+	.end	= LTQ_FLASH_START + LTQ_FLASH_MAX - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device ltq_nor = {
+	.name		= "ltq_nor",
+	.resource	= &ltq_nor_resource,
+	.num_resources	= 1,
+};
+
+void __init ltq_register_nor(struct physmap_flash_data *data)
+{
+	ltq_nor.dev.platform_data = data;
+	platform_device_register(&ltq_nor);
+}
+
+/* watchdog */
+static struct resource ltq_wdt_resource = {
+	.name	= "watchdog",
+	.start  = LTQ_WDT_BASE_ADDR,
+	.end    = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+void __init ltq_register_wdt(void)
+{
+	platform_device_register_simple("ltq_wdt", 0, &ltq_wdt_resource, 1);
+}
+
+/* asc ports */
+static struct resource ltq_asc0_resources[] = {
+	{
+		.name	= "asc0",
+		.start  = LTQ_ASC0_BASE_ADDR,
+		.end    = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	IRQ_RES(tx, LTQ_ASC_TIR(0)),
+	IRQ_RES(rx, LTQ_ASC_RIR(0)),
+	IRQ_RES(err, LTQ_ASC_EIR(0)),
+};
+
+static struct resource ltq_asc1_resources[] = {
+	{
+		.name	= "asc1",
+		.start  = LTQ_ASC1_BASE_ADDR,
+		.end    = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	IRQ_RES(tx, LTQ_ASC_TIR(1)),
+	IRQ_RES(rx, LTQ_ASC_RIR(1)),
+	IRQ_RES(err, LTQ_ASC_EIR(1)),
+};
+
+void __init ltq_register_asc(int port)
+{
+	switch (port) {
+	case 0:
+		platform_device_register_simple("ltq_asc", 0,
+			ltq_asc0_resources, ARRAY_SIZE(ltq_asc0_resources));
+		break;
+	case 1:
+		platform_device_register_simple("ltq_asc", 1,
+			ltq_asc1_resources, ARRAY_SIZE(ltq_asc1_resources));
+		break;
+	default:
+		break;
+	}
+}
+
+#ifdef CONFIG_PCI
+/* pci */
+static struct platform_device ltq_pci = {
+	.name		= "ltq_pci",
+	.num_resources	= 0,
+};
+
+void __init ltq_register_pci(struct ltq_pci_data *data)
+{
+	ltq_pci.dev.platform_data = data;
+	platform_device_register(&ltq_pci);
+}
+#else
+void __init ltq_register_pci(struct ltq_pci_data *data)
+{
+	pr_err("kernel is compiled without PCI support\n");
+}
+#endif
diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h
new file mode 100644
index 00000000000..2947bb19a52
--- /dev/null
+++ b/arch/mips/lantiq/devices.h
@@ -0,0 +1,23 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_DEVICES_H__
+#define _LTQ_DEVICES_H__
+
+#include <lantiq_platform.h>
+#include <linux/mtd/physmap.h>
+
+#define IRQ_RES(resname, irq) \
+	{.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ}
+
+extern void ltq_register_nor(struct physmap_flash_data *data);
+extern void ltq_register_wdt(void);
+extern void ltq_register_asc(int port);
+extern void ltq_register_pci(struct ltq_pci_data *data);
+
+#endif
diff --git a/arch/mips/lantiq/early_printk.c b/arch/mips/lantiq/early_printk.c
new file mode 100644
index 00000000000..972e05f8763
--- /dev/null
+++ b/arch/mips/lantiq/early_printk.c
@@ -0,0 +1,33 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/cpu.h>
+
+#include <lantiq.h>
+#include <lantiq_soc.h>
+
+/* no ioremap possible at this early stage, lets use KSEG1 instead  */
+#define LTQ_ASC_BASE	KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
+#define ASC_BUF		1024
+#define LTQ_ASC_FSTAT	((u32 *)(LTQ_ASC_BASE + 0x0048))
+#define LTQ_ASC_TBUF	((u32 *)(LTQ_ASC_BASE + 0x0020))
+#define TXMASK		0x3F00
+#define TXOFFSET	8
+
+void prom_putchar(char c)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET);
+	if (c == '\n')
+		ltq_w32('\r', LTQ_ASC_TBUF);
+	ltq_w32(c, LTQ_ASC_TBUF);
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
new file mode 100644
index 00000000000..fc89795cafd
--- /dev/null
+++ b/arch/mips/lantiq/irq.c
@@ -0,0 +1,326 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq_cpu.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+/* register definitions */
+#define LTQ_ICU_IM0_ISR		0x0000
+#define LTQ_ICU_IM0_IER		0x0008
+#define LTQ_ICU_IM0_IOSR	0x0010
+#define LTQ_ICU_IM0_IRSR	0x0018
+#define LTQ_ICU_IM0_IMR		0x0020
+#define LTQ_ICU_IM1_ISR		0x0028
+#define LTQ_ICU_OFFSET		(LTQ_ICU_IM1_ISR - LTQ_ICU_IM0_ISR)
+
+#define LTQ_EIU_EXIN_C		0x0000
+#define LTQ_EIU_EXIN_INIC	0x0004
+#define LTQ_EIU_EXIN_INEN	0x000C
+
+/* irq numbers used by the external interrupt unit (EIU) */
+#define LTQ_EIU_IR0		(INT_NUM_IM4_IRL0 + 30)
+#define LTQ_EIU_IR1		(INT_NUM_IM3_IRL0 + 31)
+#define LTQ_EIU_IR2		(INT_NUM_IM1_IRL0 + 26)
+#define LTQ_EIU_IR3		INT_NUM_IM1_IRL0
+#define LTQ_EIU_IR4		(INT_NUM_IM1_IRL0 + 1)
+#define LTQ_EIU_IR5		(INT_NUM_IM1_IRL0 + 2)
+#define LTQ_EIU_IR6		(INT_NUM_IM2_IRL0 + 30)
+
+#define MAX_EIU			6
+
+/* irqs generated by device attached to the EBU need to be acked in
+ * a special manner
+ */
+#define LTQ_ICU_EBU_IRQ		22
+
+#define ltq_icu_w32(x, y)	ltq_w32((x), ltq_icu_membase + (y))
+#define ltq_icu_r32(x)		ltq_r32(ltq_icu_membase + (x))
+
+#define ltq_eiu_w32(x, y)	ltq_w32((x), ltq_eiu_membase + (y))
+#define ltq_eiu_r32(x)		ltq_r32(ltq_eiu_membase + (x))
+
+static unsigned short ltq_eiu_irq[MAX_EIU] = {
+	LTQ_EIU_IR0,
+	LTQ_EIU_IR1,
+	LTQ_EIU_IR2,
+	LTQ_EIU_IR3,
+	LTQ_EIU_IR4,
+	LTQ_EIU_IR5,
+};
+
+static struct resource ltq_icu_resource = {
+	.name	= "icu",
+	.start	= LTQ_ICU_BASE_ADDR,
+	.end	= LTQ_ICU_BASE_ADDR + LTQ_ICU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource ltq_eiu_resource = {
+	.name	= "eiu",
+	.start	= LTQ_EIU_BASE_ADDR,
+	.end	= LTQ_EIU_BASE_ADDR + LTQ_ICU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_icu_membase;
+static void __iomem *ltq_eiu_membase;
+
+void ltq_disable_irq(struct irq_data *d)
+{
+	u32 ier = LTQ_ICU_IM0_IER;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+	irq_nr %= INT_NUM_IM_OFFSET;
+	ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier);
+}
+
+void ltq_mask_and_ack_irq(struct irq_data *d)
+{
+	u32 ier = LTQ_ICU_IM0_IER;
+	u32 isr = LTQ_ICU_IM0_ISR;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+	isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+	irq_nr %= INT_NUM_IM_OFFSET;
+	ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier);
+	ltq_icu_w32((1 << irq_nr), isr);
+}
+
+static void ltq_ack_irq(struct irq_data *d)
+{
+	u32 isr = LTQ_ICU_IM0_ISR;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+	irq_nr %= INT_NUM_IM_OFFSET;
+	ltq_icu_w32((1 << irq_nr), isr);
+}
+
+void ltq_enable_irq(struct irq_data *d)
+{
+	u32 ier = LTQ_ICU_IM0_IER;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ier += LTQ_ICU_OFFSET  * (irq_nr / INT_NUM_IM_OFFSET);
+	irq_nr %= INT_NUM_IM_OFFSET;
+	ltq_icu_w32(ltq_icu_r32(ier) | (1 << irq_nr), ier);
+}
+
+static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
+{
+	int i;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ltq_enable_irq(d);
+	for (i = 0; i < MAX_EIU; i++) {
+		if (irq_nr == ltq_eiu_irq[i]) {
+			/* low level - we should really handle set_type */
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
+				(0x6 << (i * 4)), LTQ_EIU_EXIN_C);
+			/* clear all pending */
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~(1 << i),
+				LTQ_EIU_EXIN_INIC);
+			/* enable */
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | (1 << i),
+				LTQ_EIU_EXIN_INEN);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void ltq_shutdown_eiu_irq(struct irq_data *d)
+{
+	int i;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ltq_disable_irq(d);
+	for (i = 0; i < MAX_EIU; i++) {
+		if (irq_nr == ltq_eiu_irq[i]) {
+			/* disable */
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i),
+				LTQ_EIU_EXIN_INEN);
+			break;
+		}
+	}
+}
+
+static struct irq_chip ltq_irq_type = {
+	"icu",
+	.irq_enable = ltq_enable_irq,
+	.irq_disable = ltq_disable_irq,
+	.irq_unmask = ltq_enable_irq,
+	.irq_ack = ltq_ack_irq,
+	.irq_mask = ltq_disable_irq,
+	.irq_mask_ack = ltq_mask_and_ack_irq,
+};
+
+static struct irq_chip ltq_eiu_type = {
+	"eiu",
+	.irq_startup = ltq_startup_eiu_irq,
+	.irq_shutdown = ltq_shutdown_eiu_irq,
+	.irq_enable = ltq_enable_irq,
+	.irq_disable = ltq_disable_irq,
+	.irq_unmask = ltq_enable_irq,
+	.irq_ack = ltq_ack_irq,
+	.irq_mask = ltq_disable_irq,
+	.irq_mask_ack = ltq_mask_and_ack_irq,
+};
+
+static void ltq_hw_irqdispatch(int module)
+{
+	u32 irq;
+
+	irq = ltq_icu_r32(LTQ_ICU_IM0_IOSR + (module * LTQ_ICU_OFFSET));
+	if (irq == 0)
+		return;
+
+	/* silicon bug causes only the msb set to 1 to be valid. all
+	 * other bits might be bogus
+	 */
+	irq = __fls(irq);
+	do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
+
+	/* if this is a EBU irq, we need to ack it or get a deadlock */
+	if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0))
+		ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_ISTAT) | 0x10,
+			LTQ_EBU_PCC_ISTAT);
+}
+
+#define DEFINE_HWx_IRQDISPATCH(x)					\
+	static void ltq_hw ## x ## _irqdispatch(void)			\
+	{								\
+		ltq_hw_irqdispatch(x);					\
+	}
+DEFINE_HWx_IRQDISPATCH(0)
+DEFINE_HWx_IRQDISPATCH(1)
+DEFINE_HWx_IRQDISPATCH(2)
+DEFINE_HWx_IRQDISPATCH(3)
+DEFINE_HWx_IRQDISPATCH(4)
+
+static void ltq_hw5_irqdispatch(void)
+{
+	do_IRQ(MIPS_CPU_TIMER_IRQ);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	unsigned int i;
+
+	if (pending & CAUSEF_IP7) {
+		do_IRQ(MIPS_CPU_TIMER_IRQ);
+		goto out;
+	} else {
+		for (i = 0; i < 5; i++) {
+			if (pending & (CAUSEF_IP2 << i)) {
+				ltq_hw_irqdispatch(i);
+				goto out;
+			}
+		}
+	}
+	pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
+
+out:
+	return;
+}
+
+static struct irqaction cascade = {
+	.handler = no_action,
+	.flags = IRQF_DISABLED,
+	.name = "cascade",
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	if (insert_resource(&iomem_resource, &ltq_icu_resource) < 0)
+		panic("Failed to insert icu memory\n");
+
+	if (request_mem_region(ltq_icu_resource.start,
+			resource_size(&ltq_icu_resource), "icu") < 0)
+		panic("Failed to request icu memory\n");
+
+	ltq_icu_membase = ioremap_nocache(ltq_icu_resource.start,
+				resource_size(&ltq_icu_resource));
+	if (!ltq_icu_membase)
+		panic("Failed to remap icu memory\n");
+
+	if (insert_resource(&iomem_resource, &ltq_eiu_resource) < 0)
+		panic("Failed to insert eiu memory\n");
+
+	if (request_mem_region(ltq_eiu_resource.start,
+			resource_size(&ltq_eiu_resource), "eiu") < 0)
+		panic("Failed to request eiu memory\n");
+
+	ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start,
+				resource_size(&ltq_eiu_resource));
+	if (!ltq_eiu_membase)
+		panic("Failed to remap eiu memory\n");
+
+	/* make sure all irqs are turned off by default */
+	for (i = 0; i < 5; i++)
+		ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
+
+	/* clear all possibly pending interrupts */
+	ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
+
+	mips_cpu_irq_init();
+
+	for (i = 2; i <= 6; i++)
+		setup_irq(i, &cascade);
+
+	if (cpu_has_vint) {
+		pr_info("Setting up vectored interrupts\n");
+		set_vi_handler(2, ltq_hw0_irqdispatch);
+		set_vi_handler(3, ltq_hw1_irqdispatch);
+		set_vi_handler(4, ltq_hw2_irqdispatch);
+		set_vi_handler(5, ltq_hw3_irqdispatch);
+		set_vi_handler(6, ltq_hw4_irqdispatch);
+		set_vi_handler(7, ltq_hw5_irqdispatch);
+	}
+
+	for (i = INT_NUM_IRQ0;
+		i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++)
+		if ((i == LTQ_EIU_IR0) || (i == LTQ_EIU_IR1) ||
+			(i == LTQ_EIU_IR2))
+			irq_set_chip_and_handler(i, &ltq_eiu_type,
+				handle_level_irq);
+		/* EIU3-5 only exist on ar9 and vr9 */
+		else if (((i == LTQ_EIU_IR3) || (i == LTQ_EIU_IR4) ||
+			(i == LTQ_EIU_IR5)) && (ltq_is_ar9() || ltq_is_vr9()))
+			irq_set_chip_and_handler(i, &ltq_eiu_type,
+				handle_level_irq);
+		else
+			irq_set_chip_and_handler(i, &ltq_irq_type,
+				handle_level_irq);
+
+#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
+		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+#else
+	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
+		IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+#endif
+}
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h
new file mode 100644
index 00000000000..7e01b8c484e
--- /dev/null
+++ b/arch/mips/lantiq/machtypes.h
@@ -0,0 +1,20 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_MACH_H__
+#define _LANTIQ_MACH_H__
+
+#include <asm/mips_machine.h>
+
+enum lantiq_mach_type {
+	LTQ_MACH_GENERIC = 0,
+	LTQ_MACH_EASY50712,	/* Danube evaluation board */
+	LTQ_MACH_EASY50601,	/* Amazon SE evaluation board */
+};
+
+#endif
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
new file mode 100644
index 00000000000..56ba007bf1e
--- /dev/null
+++ b/arch/mips/lantiq/prom.c
@@ -0,0 +1,71 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq.h>
+
+#include "prom.h"
+#include "clk.h"
+
+static struct ltq_soc_info soc_info;
+
+unsigned int ltq_get_cpu_ver(void)
+{
+	return soc_info.rev;
+}
+EXPORT_SYMBOL(ltq_get_cpu_ver);
+
+unsigned int ltq_get_soc_type(void)
+{
+	return soc_info.type;
+}
+EXPORT_SYMBOL(ltq_get_soc_type);
+
+const char *get_system_type(void)
+{
+	return soc_info.sys_type;
+}
+
+void prom_free_prom_memory(void)
+{
+}
+
+static void __init prom_init_cmdline(void)
+{
+	int argc = fw_arg0;
+	char **argv = (char **) KSEG1ADDR(fw_arg1);
+	int i;
+
+	for (i = 0; i < argc; i++) {
+		char *p = (char *)  KSEG1ADDR(argv[i]);
+
+		if (p && *p) {
+			strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+			strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+		}
+	}
+}
+
+void __init prom_init(void)
+{
+	struct clk *clk;
+
+	ltq_soc_detect(&soc_info);
+	clk_init();
+	clk = clk_get(0, "cpu");
+	snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d",
+		soc_info.name, soc_info.rev);
+	clk_put(clk);
+	soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
+	pr_info("SoC: %s\n", soc_info.sys_type);
+	prom_init_cmdline();
+}
diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h
new file mode 100644
index 00000000000..b4229d94280
--- /dev/null
+++ b/arch/mips/lantiq/prom.h
@@ -0,0 +1,25 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_PROM_H__
+#define _LTQ_PROM_H__
+
+#define LTQ_SYS_TYPE_LEN	0x100
+
+struct ltq_soc_info {
+	unsigned char *name;
+	unsigned int rev;
+	unsigned int partnum;
+	unsigned int type;
+	unsigned char sys_type[LTQ_SYS_TYPE_LEN];
+};
+
+extern void ltq_soc_detect(struct ltq_soc_info *i);
+extern void ltq_soc_setup(void);
+
+#endif
diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c
new file mode 100644
index 00000000000..9b8af77ed0f
--- /dev/null
+++ b/arch/mips/lantiq/setup.c
@@ -0,0 +1,66 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <asm/bootinfo.h>
+
+#include <lantiq_soc.h>
+
+#include "machtypes.h"
+#include "devices.h"
+#include "prom.h"
+
+void __init plat_mem_setup(void)
+{
+	/* assume 16M as default incase uboot fails to pass proper ramsize */
+	unsigned long memsize = 16;
+	char **envp = (char **) KSEG1ADDR(fw_arg2);
+
+	ioport_resource.start = IOPORT_RESOURCE_START;
+	ioport_resource.end = IOPORT_RESOURCE_END;
+	iomem_resource.start = IOMEM_RESOURCE_START;
+	iomem_resource.end = IOMEM_RESOURCE_END;
+
+	set_io_port_base((unsigned long) KSEG1);
+
+	while (*envp) {
+		char *e = (char *)KSEG1ADDR(*envp);
+		if (!strncmp(e, "memsize=", 8)) {
+			e += 8;
+			if (strict_strtoul(e, 0, &memsize))
+				pr_warn("bad memsize specified\n");
+		}
+		envp++;
+	}
+	memsize *= 1024 * 1024;
+	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
+}
+
+static int __init
+lantiq_setup(void)
+{
+	ltq_soc_setup();
+	mips_machine_setup();
+	return 0;
+}
+
+arch_initcall(lantiq_setup);
+
+static void __init
+lantiq_generic_init(void)
+{
+	/* Nothing to do */
+}
+
+MIPS_MACHINE(LTQ_MACH_GENERIC,
+	     "Generic",
+	     "Generic Lantiq based board",
+	     lantiq_generic_init);
diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
new file mode 100644
index 00000000000..2b857de3662
--- /dev/null
+++ b/arch/mips/lantiq/xway/Kconfig
@@ -0,0 +1,23 @@
+if SOC_XWAY
+
+menu "MIPS Machine"
+
+config LANTIQ_MACH_EASY50712
+	bool "Easy50712 - Danube"
+	default y
+
+endmenu
+
+endif
+
+if SOC_AMAZON_SE
+
+menu "MIPS Machine"
+
+config LANTIQ_MACH_EASY50601
+	bool "Easy50601 - Amazon SE"
+	default y
+
+endmenu
+
+endif
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
new file mode 100644
index 00000000000..c517f2e7756
--- /dev/null
+++ b/arch/mips/lantiq/xway/Makefile
@@ -0,0 +1,7 @@
+obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
+
+obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
+obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
+
+obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
new file mode 100644
index 00000000000..22d823acd53
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk-ase.c
@@ -0,0 +1,48 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+/* cgu registers */
+#define LTQ_CGU_SYS	0x0010
+
+unsigned int ltq_get_io_region_clock(void)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int ltq_get_fpi_bus_clock(int fpi)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int ltq_get_cpu_hz(void)
+{
+	if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+		return CLOCK_266M;
+	else
+		return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int ltq_get_fpi_hz(void)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
new file mode 100644
index 00000000000..ddd39593c58
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk-xway.c
@@ -0,0 +1,223 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+static unsigned int ltq_ram_clocks[] = {
+	CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
+#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
+
+#define BASIC_FREQUENCY_1	35328000
+#define BASIC_FREQUENCY_2	36000000
+#define BASIS_REQUENCY_USB	12000000
+
+#define GET_BITS(x, msb, lsb) \
+	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+
+#define LTQ_CGU_PLL0_CFG	0x0004
+#define LTQ_CGU_PLL1_CFG	0x0008
+#define LTQ_CGU_PLL2_CFG	0x000C
+#define LTQ_CGU_SYS		0x0010
+#define LTQ_CGU_UPDATE		0x0014
+#define LTQ_CGU_IF_CLK		0x0018
+#define LTQ_CGU_OSC_CON		0x001C
+#define LTQ_CGU_SMD		0x0020
+#define LTQ_CGU_CT1SR		0x0028
+#define LTQ_CGU_CT2SR		0x002C
+#define LTQ_CGU_PCMCR		0x0030
+#define LTQ_CGU_PCI_CR		0x0034
+#define LTQ_CGU_PD_PC		0x0038
+#define LTQ_CGU_FMR		0x003C
+
+#define CGU_PLL0_PHASE_DIVIDER_ENABLE	\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
+#define CGU_PLL0_BYPASS			\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
+#define CGU_PLL0_CFG_DSMSEL		\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
+#define CGU_PLL0_CFG_FRAC_EN		\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
+#define CGU_PLL1_SRC			\
+	(ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
+#define CGU_PLL2_PHASE_DIVIDER_ENABLE	\
+	(ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
+#define CGU_SYS_FPI_SEL			(1 << 6)
+#define CGU_SYS_DDR_SEL			0x3
+#define CGU_PLL0_SRC			(1 << 29)
+
+#define CGU_PLL0_CFG_PLLK	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
+#define CGU_PLL0_CFG_PLLN	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
+#define CGU_PLL0_CFG_PLLM	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
+#define CGU_PLL2_SRC		GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
+#define CGU_PLL2_CFG_INPUT_DIV	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
+
+static unsigned int ltq_get_pll0_fdiv(void);
+
+static inline unsigned int get_input_clock(int pll)
+{
+	switch (pll) {
+	case 0:
+		if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
+			return BASIS_REQUENCY_USB;
+		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			return BASIC_FREQUENCY_1;
+		else
+			return BASIC_FREQUENCY_2;
+	case 1:
+		if (CGU_PLL1_SRC)
+			return BASIS_REQUENCY_USB;
+		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			return BASIC_FREQUENCY_1;
+		else
+			return BASIC_FREQUENCY_2;
+	case 2:
+		switch (CGU_PLL2_SRC) {
+		case 0:
+			return ltq_get_pll0_fdiv();
+		case 1:
+			return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
+				BASIC_FREQUENCY_1 :
+				BASIC_FREQUENCY_2;
+		case 2:
+			return BASIS_REQUENCY_USB;
+		}
+	default:
+		return 0;
+	}
+}
+
+static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
+{
+	u64 res, clock = get_input_clock(pll);
+
+	res = num * clock;
+	do_div(res, den);
+	return res;
+}
+
+static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = ((N + 1) << 10) + K;
+	unsigned int den = (M + 1) << 10;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = ((N + 1) << 11) + K + 512;
+	unsigned int den = (M + 1) << 11;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = K >= 512 ?
+		((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
+	unsigned int den = (M + 1) << 12;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
+	unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
+{
+	if (!dsmsel)
+		return mash_dsm(pll, M, N, K);
+	else if (!phase_div_en)
+		return mash_dsm(pll, M, N, K);
+	else
+		return ssff_dsm_2(pll, M, N, K);
+}
+
+static inline unsigned int ltq_get_pll0_fosc(void)
+{
+	if (CGU_PLL0_BYPASS)
+		return get_input_clock(0);
+	else
+		return !CGU_PLL0_CFG_FRAC_EN
+			? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
+				CGU_PLL0_CFG_DSMSEL,
+				CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			: dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
+				CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
+				CGU_PLL0_PHASE_DIVIDER_ENABLE);
+}
+
+static unsigned int ltq_get_pll0_fdiv(void)
+{
+	unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
+
+	return (ltq_get_pll0_fosc() + (div >> 1)) / div;
+}
+
+unsigned int ltq_get_io_region_clock(void)
+{
+	unsigned int ret = ltq_get_pll0_fosc();
+
+	switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
+	default:
+	case 0:
+		return (ret + 1) / 2;
+	case 1:
+		return (ret * 2 + 2) / 5;
+	case 2:
+		return (ret + 1) / 3;
+	case 3:
+		return (ret + 2) / 4;
+	}
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int ltq_get_fpi_bus_clock(int fpi)
+{
+	unsigned int ret = ltq_get_io_region_clock();
+
+	if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
+		ret >>= 1;
+	return ret;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int ltq_get_cpu_hz(void)
+{
+	switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+	case 0:
+		return CLOCK_333M;
+	case 4:
+		return DDR_HZ;
+	case 8:
+		return DDR_HZ << 1;
+	default:
+		return DDR_HZ >> 1;
+	}
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int ltq_get_fpi_hz(void)
+{
+	unsigned int ddr_clock = DDR_HZ;
+
+	if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+		return ddr_clock >> 1;
+	return ddr_clock;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
new file mode 100644
index 00000000000..e09e789dfc2
--- /dev/null
+++ b/arch/mips/lantiq/xway/devices.c
@@ -0,0 +1,121 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/etherdevice.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+#include <lantiq_platform.h>
+
+#include "devices.h"
+
+/* gpio */
+static struct resource ltq_gpio_resource[] = {
+	{
+		.name	= "gpio0",
+		.start  = LTQ_GPIO0_BASE_ADDR,
+		.end    = LTQ_GPIO0_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name	= "gpio1",
+		.start  = LTQ_GPIO1_BASE_ADDR,
+		.end    = LTQ_GPIO1_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name	= "gpio2",
+		.start  = LTQ_GPIO2_BASE_ADDR,
+		.end    = LTQ_GPIO2_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}
+};
+
+void __init ltq_register_gpio(void)
+{
+	platform_device_register_simple("ltq_gpio", 0,
+		&ltq_gpio_resource[0], 1);
+	platform_device_register_simple("ltq_gpio", 1,
+		&ltq_gpio_resource[1], 1);
+
+	/* AR9 and VR9 have an extra gpio block */
+	if (ltq_is_ar9() || ltq_is_vr9()) {
+		platform_device_register_simple("ltq_gpio", 2,
+			&ltq_gpio_resource[2], 1);
+	}
+}
+
+/* serial to parallel conversion */
+static struct resource ltq_stp_resource = {
+	.name   = "stp",
+	.start  = LTQ_STP_BASE_ADDR,
+	.end    = LTQ_STP_BASE_ADDR + LTQ_STP_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+void __init ltq_register_gpio_stp(void)
+{
+	platform_device_register_simple("ltq_stp", 0, &ltq_stp_resource, 1);
+}
+
+/* asc ports - amazon se has its own serial mapping */
+static struct resource ltq_ase_asc_resources[] = {
+	{
+		.name	= "asc0",
+		.start  = LTQ_ASC1_BASE_ADDR,
+		.end    = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	IRQ_RES(tx, LTQ_ASC_ASE_TIR),
+	IRQ_RES(rx, LTQ_ASC_ASE_RIR),
+	IRQ_RES(err, LTQ_ASC_ASE_EIR),
+};
+
+void __init ltq_register_ase_asc(void)
+{
+	platform_device_register_simple("ltq_asc", 0,
+		ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
+}
+
+/* ethernet */
+static struct resource ltq_etop_resources = {
+	.name	= "etop",
+	.start	= LTQ_ETOP_BASE_ADDR,
+	.end	= LTQ_ETOP_BASE_ADDR + LTQ_ETOP_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device ltq_etop = {
+	.name		= "ltq_etop",
+	.resource	= &ltq_etop_resources,
+	.num_resources	= 1,
+};
+
+void __init
+ltq_register_etop(struct ltq_eth_data *eth)
+{
+	if (eth) {
+		ltq_etop.dev.platform_data = eth;
+		platform_device_register(&ltq_etop);
+	}
+}
diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
new file mode 100644
index 00000000000..e90493471bc
--- /dev/null
+++ b/arch/mips/lantiq/xway/devices.h
@@ -0,0 +1,20 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_DEVICES_XWAY_H__
+#define _LTQ_DEVICES_XWAY_H__
+
+#include "../devices.h"
+#include <linux/phy.h>
+
+extern void ltq_register_gpio(void);
+extern void ltq_register_gpio_stp(void);
+extern void ltq_register_ase_asc(void);
+extern void ltq_register_etop(struct ltq_eth_data *eth);
+
+#endif
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
new file mode 100644
index 00000000000..4278a459d6c
--- /dev/null
+++ b/arch/mips/lantiq/xway/dma.c
@@ -0,0 +1,253 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License version 2 as published
+ *   by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include <lantiq_soc.h>
+#include <xway_dma.h>
+
+#define LTQ_DMA_CTRL		0x10
+#define LTQ_DMA_CPOLL		0x14
+#define LTQ_DMA_CS		0x18
+#define LTQ_DMA_CCTRL		0x1C
+#define LTQ_DMA_CDBA		0x20
+#define LTQ_DMA_CDLEN		0x24
+#define LTQ_DMA_CIS		0x28
+#define LTQ_DMA_CIE		0x2C
+#define LTQ_DMA_PS		0x40
+#define LTQ_DMA_PCTRL		0x44
+#define LTQ_DMA_IRNEN		0xf4
+
+#define DMA_DESCPT		BIT(3)		/* descriptor complete irq */
+#define DMA_TX			BIT(8)		/* TX channel direction */
+#define DMA_CHAN_ON		BIT(0)		/* channel on / off bit */
+#define DMA_PDEN		BIT(6)		/* enable packet drop */
+#define DMA_CHAN_RST		BIT(1)		/* channel on / off bit */
+#define DMA_RESET		BIT(0)		/* channel on / off bit */
+#define DMA_IRQ_ACK		0x7e		/* IRQ status register */
+#define DMA_POLL		BIT(31)		/* turn on channel polling */
+#define DMA_CLK_DIV4		BIT(6)		/* polling clock divider */
+#define DMA_2W_BURST		BIT(1)		/* 2 word burst length */
+#define DMA_MAX_CHANNEL		20		/* the soc has 20 channels */
+#define DMA_ETOP_ENDIANESS	(0xf << 8) /* endianess swap etop channels */
+#define DMA_WEIGHT	(BIT(17) | BIT(16))	/* default channel wheight */
+
+#define ltq_dma_r32(x)			ltq_r32(ltq_dma_membase + (x))
+#define ltq_dma_w32(x, y)		ltq_w32(x, ltq_dma_membase + (y))
+#define ltq_dma_w32_mask(x, y, z)	ltq_w32_mask(x, y, \
+						ltq_dma_membase + (z))
+
+static struct resource ltq_dma_resource = {
+	.name	= "dma",
+	.start	= LTQ_DMA_BASE_ADDR,
+	.end	= LTQ_DMA_BASE_ADDR + LTQ_DMA_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_dma_membase;
+
+void
+ltq_dma_enable_irq(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_enable_irq);
+
+void
+ltq_dma_disable_irq(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_disable_irq);
+
+void
+ltq_dma_ack_irq(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_ack_irq);
+
+void
+ltq_dma_open(struct ltq_dma_channel *ch)
+{
+	unsigned long flag;
+
+	local_irq_save(flag);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL);
+	ltq_dma_enable_irq(ch);
+	local_irq_restore(flag);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_open);
+
+void
+ltq_dma_close(struct ltq_dma_channel *ch)
+{
+	unsigned long flag;
+
+	local_irq_save(flag);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+	ltq_dma_disable_irq(ch);
+	local_irq_restore(flag);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_close);
+
+static void
+ltq_dma_alloc(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	ch->desc = 0;
+	ch->desc_base = dma_alloc_coherent(NULL,
+				LTQ_DESC_NUM * LTQ_DESC_SIZE,
+				&ch->phys, GFP_ATOMIC);
+	memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE);
+
+	local_irq_save(flags);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32(ch->phys, LTQ_DMA_CDBA);
+	ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN);
+	ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+	wmb();
+	ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL);
+	while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST)
+		;
+	local_irq_restore(flags);
+}
+
+void
+ltq_dma_alloc_tx(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	ltq_dma_alloc(ch);
+
+	local_irq_save(flags);
+	ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
+	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+	ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx);
+
+void
+ltq_dma_alloc_rx(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	ltq_dma_alloc(ch);
+
+	local_irq_save(flags);
+	ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
+	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+	ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx);
+
+void
+ltq_dma_free(struct ltq_dma_channel *ch)
+{
+	if (!ch->desc_base)
+		return;
+	ltq_dma_close(ch);
+	dma_free_coherent(NULL, LTQ_DESC_NUM * LTQ_DESC_SIZE,
+		ch->desc_base, ch->phys);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_free);
+
+void
+ltq_dma_init_port(int p)
+{
+	ltq_dma_w32(p, LTQ_DMA_PS);
+	switch (p) {
+	case DMA_PORT_ETOP:
+		/*
+		 * Tell the DMA engine to swap the endianess of data frames and
+		 * drop packets if the channel arbitration fails.
+		 */
+		ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN,
+			LTQ_DMA_PCTRL);
+		break;
+
+	case DMA_PORT_DEU:
+		ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2),
+			LTQ_DMA_PCTRL);
+		break;
+
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(ltq_dma_init_port);
+
+int __init
+ltq_dma_init(void)
+{
+	int i;
+
+	/* insert and request the memory region */
+	if (insert_resource(&iomem_resource, &ltq_dma_resource) < 0)
+		panic("Failed to insert dma memory\n");
+
+	if (request_mem_region(ltq_dma_resource.start,
+			resource_size(&ltq_dma_resource), "dma") < 0)
+		panic("Failed to request dma memory\n");
+
+	/* remap dma register range */
+	ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start,
+				resource_size(&ltq_dma_resource));
+	if (!ltq_dma_membase)
+		panic("Failed to remap dma memory\n");
+
+	/* power up and reset the dma engine */
+	ltq_pmu_enable(PMU_DMA);
+	ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+
+	/* disable all interrupts */
+	ltq_dma_w32(0, LTQ_DMA_IRNEN);
+
+	/* reset/configure each channel */
+	for (i = 0; i < DMA_MAX_CHANNEL; i++) {
+		ltq_dma_w32(i, LTQ_DMA_CS);
+		ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
+		ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
+		ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+	}
+	return 0;
+}
+
+postcore_initcall(ltq_dma_init);
diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
new file mode 100644
index 00000000000..66eb52fa50a
--- /dev/null
+++ b/arch/mips/lantiq/xway/ebu.c
@@ -0,0 +1,53 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  EBU - the external bus unit attaches PCI, NOR and NAND
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+
+#include <lantiq_soc.h>
+
+/* all access to the ebu must be locked */
+DEFINE_SPINLOCK(ebu_lock);
+EXPORT_SYMBOL_GPL(ebu_lock);
+
+static struct resource ltq_ebu_resource = {
+	.name	= "ebu",
+	.start	= LTQ_EBU_BASE_ADDR,
+	.end	= LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+/* remapped base addr of the clock unit and external bus unit */
+void __iomem *ltq_ebu_membase;
+
+static int __init lantiq_ebu_init(void)
+{
+	/* insert and request the memory region */
+	if (insert_resource(&iomem_resource, &ltq_ebu_resource) < 0)
+		panic("Failed to insert ebu memory\n");
+
+	if (request_mem_region(ltq_ebu_resource.start,
+			resource_size(&ltq_ebu_resource), "ebu") < 0)
+		panic("Failed to request ebu memory\n");
+
+	/* remap ebu register range */
+	ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start,
+				resource_size(&ltq_ebu_resource));
+	if (!ltq_ebu_membase)
+		panic("Failed to remap ebu memory\n");
+
+	/* make sure to unprotect the memory region where flash is located */
+	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+	return 0;
+}
+
+postcore_initcall(lantiq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
new file mode 100644
index 00000000000..a321451a545
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -0,0 +1,195 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_GPIO_OUT		0x00
+#define LTQ_GPIO_IN		0x04
+#define LTQ_GPIO_DIR		0x08
+#define LTQ_GPIO_ALTSEL0	0x0C
+#define LTQ_GPIO_ALTSEL1	0x10
+#define LTQ_GPIO_OD		0x14
+
+#define PINS_PER_PORT		16
+#define MAX_PORTS		3
+
+#define ltq_gpio_getbit(m, r, p)	(!!(ltq_r32(m + r) & (1 << p)))
+#define ltq_gpio_setbit(m, r, p)	ltq_w32_mask(0, (1 << p), m + r)
+#define ltq_gpio_clearbit(m, r, p)	ltq_w32_mask((1 << p), 0, m + r)
+
+struct ltq_gpio {
+	void __iomem *membase;
+	struct gpio_chip chip;
+};
+
+static struct ltq_gpio ltq_gpio_port[MAX_PORTS];
+
+int gpio_to_irq(unsigned int gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned int gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+int ltq_gpio_request(unsigned int pin, unsigned int alt0,
+	unsigned int alt1, unsigned int dir, const char *name)
+{
+	int id = 0;
+
+	if (pin >= (MAX_PORTS * PINS_PER_PORT))
+		return -EINVAL;
+	if (gpio_request(pin, name)) {
+		pr_err("failed to setup lantiq gpio: %s\n", name);
+		return -EBUSY;
+	}
+	if (dir)
+		gpio_direction_output(pin, 1);
+	else
+		gpio_direction_input(pin);
+	while (pin >= PINS_PER_PORT) {
+		pin -= PINS_PER_PORT;
+		id++;
+	}
+	if (alt0)
+		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL0, pin);
+	else
+		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL0, pin);
+	if (alt1)
+		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL1, pin);
+	else
+		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL1, pin);
+	return 0;
+}
+EXPORT_SYMBOL(ltq_gpio_request);
+
+static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	if (value)
+		ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+	else
+		ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+}
+
+static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset);
+}
+
+static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+
+	return 0;
+}
+
+static int ltq_gpio_direction_output(struct gpio_chip *chip,
+	unsigned int offset, int value)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+	ltq_gpio_set(chip, offset, value);
+
+	return 0;
+}
+
+static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
+	return 0;
+}
+
+static int ltq_gpio_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	if (pdev->id >= MAX_PORTS) {
+		dev_err(&pdev->dev, "invalid gpio port %d\n",
+			pdev->id);
+		return -EINVAL;
+	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
+			pdev->id);
+		return -ENOENT;
+	}
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev,
+			"failed to request memory for gpio port %d\n",
+			pdev->id);
+		return -EBUSY;
+	}
+	ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev,
+		res->start, resource_size(res));
+	if (!ltq_gpio_port[pdev->id].membase) {
+		dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n",
+			pdev->id);
+		return -ENOMEM;
+	}
+	ltq_gpio_port[pdev->id].chip.label = "ltq_gpio";
+	ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input;
+	ltq_gpio_port[pdev->id].chip.direction_output =
+		ltq_gpio_direction_output;
+	ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get;
+	ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
+	ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
+	ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
+	ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
+	platform_set_drvdata(pdev, &ltq_gpio_port[pdev->id]);
+	return gpiochip_add(&ltq_gpio_port[pdev->id].chip);
+}
+
+static struct platform_driver
+ltq_gpio_driver = {
+	.probe = ltq_gpio_probe,
+	.driver = {
+		.name = "ltq_gpio",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init ltq_gpio_init(void)
+{
+	int ret = platform_driver_register(&ltq_gpio_driver);
+
+	if (ret)
+		pr_info("ltq_gpio : Error registering platfom driver!");
+	return ret;
+}
+
+postcore_initcall(ltq_gpio_init);
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
new file mode 100644
index 00000000000..a479355abdb
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -0,0 +1,126 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+/*
+ * By attaching hardware latches to the EBU it is possible to create output
+ * only gpios. This driver configures a special memory address, which when
+ * written to outputs 16 bit to the latches.
+ */
+
+#define LTQ_EBU_BUSCON	0x1e7ff		/* 16 bit access, slowest timing */
+#define LTQ_EBU_WP	0x80000000	/* write protect bit */
+
+/* we keep a shadow value of the last value written to the ebu */
+static int ltq_ebu_gpio_shadow = 0x0;
+static void __iomem *ltq_ebu_gpio_membase;
+
+static void ltq_ebu_apply(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
+	*((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow;
+	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (value)
+		ltq_ebu_gpio_shadow |= (1 << offset);
+	else
+		ltq_ebu_gpio_shadow &= ~(1 << offset);
+	ltq_ebu_apply();
+}
+
+static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset,
+	int value)
+{
+	ltq_ebu_set(chip, offset, value);
+
+	return 0;
+}
+
+static struct gpio_chip ltq_ebu_chip = {
+	.label = "ltq_ebu",
+	.direction_output = ltq_ebu_direction_output,
+	.set = ltq_ebu_set,
+	.base = 72,
+	.ngpio = 16,
+	.can_sleep = 1,
+	.owner = THIS_MODULE,
+};
+
+static int ltq_ebu_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		return -ENOENT;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		return -EBUSY;
+	}
+
+	ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+		resource_size(res));
+	if (!ltq_ebu_gpio_membase) {
+		dev_err(&pdev->dev, "Failed to ioremap mem region\n");
+		return -ENOMEM;
+	}
+
+	/* grab the default shadow value passed form the platform code */
+	ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data;
+
+	/* tell the ebu controller which memory address we will be using */
+	ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1);
+
+	/* write protect the region */
+	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+
+	ret = gpiochip_add(&ltq_ebu_chip);
+	if (!ret)
+		ltq_ebu_apply();
+	return ret;
+}
+
+static struct platform_driver ltq_ebu_driver = {
+	.probe = ltq_ebu_probe,
+	.driver = {
+		.name = "ltq_ebu",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init ltq_ebu_init(void)
+{
+	int ret = platform_driver_register(&ltq_ebu_driver);
+
+	if (ret)
+		pr_info("ltq_ebu : Error registering platfom driver!");
+	return ret;
+}
+
+postcore_initcall(ltq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
new file mode 100644
index 00000000000..67d59d69034
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -0,0 +1,157 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_STP_CON0		0x00
+#define LTQ_STP_CON1		0x04
+#define LTQ_STP_CPU0		0x08
+#define LTQ_STP_CPU1		0x0C
+#define LTQ_STP_AR		0x10
+
+#define LTQ_STP_CON_SWU		(1 << 31)
+#define LTQ_STP_2HZ		0
+#define LTQ_STP_4HZ		(1 << 23)
+#define LTQ_STP_8HZ		(2 << 23)
+#define LTQ_STP_10HZ		(3 << 23)
+#define LTQ_STP_SPEED_MASK	(0xf << 23)
+#define LTQ_STP_UPD_FPI		(1 << 31)
+#define LTQ_STP_UPD_MASK	(3 << 30)
+#define LTQ_STP_ADSL_SRC	(3 << 24)
+
+#define LTQ_STP_GROUP0		(1 << 0)
+
+#define LTQ_STP_RISING		0
+#define LTQ_STP_FALLING		(1 << 26)
+#define LTQ_STP_EDGE_MASK	(1 << 26)
+
+#define ltq_stp_r32(reg)	__raw_readl(ltq_stp_membase + reg)
+#define ltq_stp_w32(val, reg)	__raw_writel(val, ltq_stp_membase + reg)
+#define ltq_stp_w32_mask(clear, set, reg) \
+		ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \
+		ltq_stp_membase + (reg))
+
+static int ltq_stp_shadow = 0xffff;
+static void __iomem *ltq_stp_membase;
+
+static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (value)
+		ltq_stp_shadow |= (1 << offset);
+	else
+		ltq_stp_shadow &= ~(1 << offset);
+	ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
+}
+
+static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
+	int value)
+{
+	ltq_stp_set(chip, offset, value);
+
+	return 0;
+}
+
+static struct gpio_chip ltq_stp_chip = {
+	.label = "ltq_stp",
+	.direction_output = ltq_stp_direction_output,
+	.set = ltq_stp_set,
+	.base = 48,
+	.ngpio = 24,
+	.can_sleep = 1,
+	.owner = THIS_MODULE,
+};
+
+static int ltq_stp_hw_init(void)
+{
+	/* the 3 pins used to control the external stp */
+	ltq_gpio_request(4, 1, 0, 1, "stp-st");
+	ltq_gpio_request(5, 1, 0, 1, "stp-d");
+	ltq_gpio_request(6, 1, 0, 1, "stp-sh");
+
+	/* sane defaults */
+	ltq_stp_w32(0, LTQ_STP_AR);
+	ltq_stp_w32(0, LTQ_STP_CPU0);
+	ltq_stp_w32(0, LTQ_STP_CPU1);
+	ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0);
+	ltq_stp_w32(0, LTQ_STP_CON1);
+
+	/* rising or falling edge */
+	ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0);
+
+	/* per default stp 15-0 are set */
+	ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1);
+
+	/* stp are update periodically by the FPI bus */
+	ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
+
+	/* set stp update speed */
+	ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
+
+	/* tell the hardware that pin (led) 0 and 1 are controlled
+	 *  by the dsl arc
+	 */
+	ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
+
+	ltq_pmu_enable(PMU_LED);
+	return 0;
+}
+
+static int __devinit ltq_stp_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int ret = 0;
+
+	if (!res)
+		return -ENOENT;
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request STP memory\n");
+		return -EBUSY;
+	}
+	ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+		resource_size(res));
+	if (!ltq_stp_membase) {
+		dev_err(&pdev->dev, "failed to remap STP memory\n");
+		return -ENOMEM;
+	}
+	ret = gpiochip_add(&ltq_stp_chip);
+	if (!ret)
+		ret = ltq_stp_hw_init();
+
+	return ret;
+}
+
+static struct platform_driver ltq_stp_driver = {
+	.probe = ltq_stp_probe,
+	.driver = {
+		.name = "ltq_stp",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init ltq_stp_init(void)
+{
+	int ret = platform_driver_register(&ltq_stp_driver);
+
+	if (ret)
+		pr_info("ltq_stp: error registering platfom driver");
+	return ret;
+}
+
+postcore_initcall(ltq_stp_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c
new file mode 100644
index 00000000000..d5aaf637ab1
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-easy50601.c
@@ -0,0 +1,57 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <lantiq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50601_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0xE0000,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= 0x100000,
+		.size	= 0x300000,
+	},
+};
+
+static struct physmap_flash_data easy50601_flash_data = {
+	.nr_parts	= ARRAY_SIZE(easy50601_partitions),
+	.parts		= easy50601_partitions,
+};
+
+static void __init easy50601_init(void)
+{
+	ltq_register_nor(&easy50601_flash_data);
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50601,
+			"EASY50601",
+			"EASY50601 Eval Board",
+			easy50601_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
new file mode 100644
index 00000000000..ea5027b3239
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
@@ -0,0 +1,74 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50712_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0xe0000,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= 0x100000,
+		.size	= 0x300000,
+	},
+};
+
+static struct physmap_flash_data easy50712_flash_data = {
+	.nr_parts	= ARRAY_SIZE(easy50712_partitions),
+	.parts		= easy50712_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+static void __init easy50712_init(void)
+{
+	ltq_register_gpio_stp();
+	ltq_register_nor(&easy50712_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50712,
+	     "EASY50712",
+	     "EASY50712 Eval Board",
+	      easy50712_init);
diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
new file mode 100644
index 00000000000..9d69f01e352
--- /dev/null
+++ b/arch/mips/lantiq/xway/pmu.c
@@ -0,0 +1,70 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+
+#include <lantiq_soc.h>
+
+/* PMU - the power management unit allows us to turn part of the core
+ * on and off
+ */
+
+/* the enable / disable registers */
+#define LTQ_PMU_PWDCR	0x1C
+#define LTQ_PMU_PWDSR	0x20
+
+#define ltq_pmu_w32(x, y)	ltq_w32((x), ltq_pmu_membase + (y))
+#define ltq_pmu_r32(x)		ltq_r32(ltq_pmu_membase + (x))
+
+static struct resource ltq_pmu_resource = {
+	.name	= "pmu",
+	.start	= LTQ_PMU_BASE_ADDR,
+	.end	= LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_pmu_membase;
+
+void ltq_pmu_enable(unsigned int module)
+{
+	int err = 1000000;
+
+	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
+	do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
+
+	if (!err)
+		panic("activating PMU module failed!\n");
+}
+EXPORT_SYMBOL(ltq_pmu_enable);
+
+void ltq_pmu_disable(unsigned int module)
+{
+	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
+}
+EXPORT_SYMBOL(ltq_pmu_disable);
+
+int __init ltq_pmu_init(void)
+{
+	if (insert_resource(&iomem_resource, &ltq_pmu_resource) < 0)
+		panic("Failed to insert pmu memory\n");
+
+	if (request_mem_region(ltq_pmu_resource.start,
+			resource_size(&ltq_pmu_resource), "pmu") < 0)
+		panic("Failed to request pmu memory\n");
+
+	ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start,
+				resource_size(&ltq_pmu_resource));
+	if (!ltq_pmu_membase)
+		panic("Failed to remap pmu memory\n");
+	return 0;
+}
+
+core_initcall(ltq_pmu_init);
diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
new file mode 100644
index 00000000000..abe49f4db57
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom-ase.c
@@ -0,0 +1,39 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_AMAZON_SE	"Amazon_SE"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFFFFF
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+	switch (i->partnum) {
+	case SOC_ID_AMAZON_SE:
+		i->name = SOC_AMAZON_SE;
+		i->type = SOC_TYPE_AMAZON_SE;
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}
diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
new file mode 100644
index 00000000000..1686692ac24
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom-xway.c
@@ -0,0 +1,54 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_DANUBE	"Danube"
+#define SOC_TWINPASS	"Twinpass"
+#define SOC_AR9		"AR9"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFFFFF
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+	switch (i->partnum) {
+	case SOC_ID_DANUBE1:
+	case SOC_ID_DANUBE2:
+		i->name = SOC_DANUBE;
+		i->type = SOC_TYPE_DANUBE;
+		break;
+
+	case SOC_ID_TWINPASS:
+		i->name = SOC_TWINPASS;
+		i->type = SOC_TYPE_DANUBE;
+		break;
+
+	case SOC_ID_ARX188:
+	case SOC_ID_ARX168:
+	case SOC_ID_ARX182:
+		i->name = SOC_AR9;
+		i->type = SOC_TYPE_AR9;
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
new file mode 100644
index 00000000000..a1be36d0e49
--- /dev/null
+++ b/arch/mips/lantiq/xway/reset.c
@@ -0,0 +1,91 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/module.h>
+#include <asm/reboot.h>
+
+#include <lantiq_soc.h>
+
+#define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
+#define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
+
+/* register definitions */
+#define LTQ_RCU_RST		0x0010
+#define LTQ_RCU_RST_ALL		0x40000000
+
+#define LTQ_RCU_RST_STAT	0x0014
+#define LTQ_RCU_STAT_SHIFT	26
+
+static struct resource ltq_rcu_resource = {
+	.name   = "rcu",
+	.start  = LTQ_RCU_BASE_ADDR,
+	.end    = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+/* remapped base addr of the reset control unit */
+static void __iomem *ltq_rcu_membase;
+
+/* This function is used by the watchdog driver */
+int ltq_reset_cause(void)
+{
+	u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
+	return val >> LTQ_RCU_STAT_SHIFT;
+}
+EXPORT_SYMBOL_GPL(ltq_reset_cause);
+
+static void ltq_machine_restart(char *command)
+{
+	pr_notice("System restart\n");
+	local_irq_disable();
+	ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
+	unreachable();
+}
+
+static void ltq_machine_halt(void)
+{
+	pr_notice("System halted.\n");
+	local_irq_disable();
+	unreachable();
+}
+
+static void ltq_machine_power_off(void)
+{
+	pr_notice("Please turn off the power now.\n");
+	local_irq_disable();
+	unreachable();
+}
+
+static int __init mips_reboot_setup(void)
+{
+	/* insert and request the memory region */
+	if (insert_resource(&iomem_resource, &ltq_rcu_resource) < 0)
+		panic("Failed to insert rcu memory\n");
+
+	if (request_mem_region(ltq_rcu_resource.start,
+			resource_size(&ltq_rcu_resource), "rcu") < 0)
+		panic("Failed to request rcu memory\n");
+
+	/* remap rcu register range */
+	ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
+				resource_size(&ltq_rcu_resource));
+	if (!ltq_rcu_membase)
+		panic("Failed to remap rcu memory\n");
+
+	_machine_restart = ltq_machine_restart;
+	_machine_halt = ltq_machine_halt;
+	pm_power_off = ltq_machine_power_off;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c
new file mode 100644
index 00000000000..f6f326798a3
--- /dev/null
+++ b/arch/mips/lantiq/xway/setup-ase.c
@@ -0,0 +1,19 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+#include "devices.h"
+
+void __init ltq_soc_setup(void)
+{
+	ltq_register_ase_asc();
+	ltq_register_gpio();
+	ltq_register_wdt();
+}
diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c
new file mode 100644
index 00000000000..c292f643a85
--- /dev/null
+++ b/arch/mips/lantiq/xway/setup-xway.c
@@ -0,0 +1,20 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+#include "devices.h"
+
+void __init ltq_soc_setup(void)
+{
+	ltq_register_asc(0);
+	ltq_register_asc(1);
+	ltq_register_gpio();
+	ltq_register_wdt();
+}
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 2adead5a8a3..b2cad4fd5fc 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_CPU_TX39XX)	+= r3k_dump_tlb.o
 obj-$(CONFIG_CPU_TX49XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_VR41XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= dump_tlb.o
+obj-$(CONFIG_CPU_XLR)		+= dump_tlb.o
 
 # libgcc-style stuff needed in the kernel
 obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S
index c768e300061..64457162f7e 100644
--- a/arch/mips/lib/strnlen_user.S
+++ b/arch/mips/lib/strnlen_user.S
@@ -17,7 +17,7 @@
 	.previous
 
 /*
- * Return the size of a string including the ending NUL character upto a
+ * Return the size of a string including the ending NUL character up to a
  * maximum of a1 or 0 in case of error.
  *
  * Note: for performance reasons we deliberately accept that a user may
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
index 8c807c96519..0cb1b9760e3 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -201,8 +201,6 @@ static struct clocksource clocksource_mfgpt = {
 	.rating = 120, /* Functional for real use, but not desired */
 	.read = mfgpt_read,
 	.mask = CLOCKSOURCE_MASK(32),
-	.mult = 0,
-	.shift = 22,
 };
 
 int __init init_mfgpt_clocksource(void)
@@ -210,8 +208,7 @@ int __init init_mfgpt_clocksource(void)
 	if (num_possible_cpus() > 1)	/* MFGPT does not scale! */
 		return 0;
 
-	clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22);
-	return clocksource_register(&clocksource_mfgpt);
+	return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
 }
 
 arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index 11b193f848f..d93830ad611 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -29,9 +29,10 @@ unsigned long memsize, highmemsize;
 
 #define parse_even_earlier(res, option, p)				\
 do {									\
-	int ret;							\
+	unsigned int tmp __maybe_unused;				\
+									\
 	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-		ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
+		tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \
 } while (0)
 
 void __init prom_init_env(void)
diff --git a/arch/mips/math-emu/dp_fsp.c b/arch/mips/math-emu/dp_fsp.c
index 1dfbd92ba9d..daed6834dc1 100644
--- a/arch/mips/math-emu/dp_fsp.c
+++ b/arch/mips/math-emu/dp_fsp.c
@@ -62,7 +62,7 @@ ieee754dp ieee754dp_fsp(ieee754sp x)
 		break;
 	}
 
-	/* CANT possibly overflow,underflow, or need rounding
+	/* CAN'T possibly overflow,underflow, or need rounding
 	 */
 
 	/* drop the hidden bit */
diff --git a/arch/mips/math-emu/dp_mul.c b/arch/mips/math-emu/dp_mul.c
index aa566e785f5..09175f46192 100644
--- a/arch/mips/math-emu/dp_mul.c
+++ b/arch/mips/math-emu/dp_mul.c
@@ -104,7 +104,7 @@ ieee754dp ieee754dp_mul(ieee754dp x, ieee754dp y)
 	case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_NORM):
 		break;
 	}
-	/* rm = xm * ym, re = xe+ye basicly */
+	/* rm = xm * ym, re = xe+ye basically */
 	assert(xm & DP_HIDDEN_BIT);
 	assert(ym & DP_HIDDEN_BIT);
 	{
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index 36d975ae08f..3c4a8c5ba7f 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -32,7 +32,7 @@
  * not change cp0_epc due to the instruction
  *
  * According to the spec:
- * 1) it shouldnt be a branch :-)
+ * 1) it shouldn't be a branch :-)
  * 2) it can be a COP instruction :-(
  * 3) if we are tring to run a protected memory space we must take
  *    special care on memory access instructions :-(
diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c
index c06bb4022be..2722a2570ea 100644
--- a/arch/mips/math-emu/sp_mul.c
+++ b/arch/mips/math-emu/sp_mul.c
@@ -104,7 +104,7 @@ ieee754sp ieee754sp_mul(ieee754sp x, ieee754sp y)
 	case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_NORM):
 		break;
 	}
-	/* rm = xm * ym, re = xe+ye basicly */
+	/* rm = xm * ym, re = xe+ye basically */
 	assert(xm & SP_HIDDEN_BIT);
 	assert(ym & SP_HIDDEN_BIT);
 
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index d679c772d08..4d8c1623eee 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,7 +3,8 @@
 #
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
-				   init.o tlbex.o tlbex-fault.o uasm.o page.o
+				   init.o mmap.o tlbex.o tlbex-fault.o uasm.o \
+				   page.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
@@ -29,6 +30,7 @@ obj-$(CONFIG_CPU_TX39XX)	+= c-tx39.o tlb-r3k.o
 obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-octeon.o cex-oct.o tlb-r4k.o
+obj-$(CONFIG_CPU_XLR)		+= c-r4k.o tlb-r4k.o cex-gen.o
 
 obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index b4923a75cb4..d9bc5d3593b 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1006,6 +1006,7 @@ static void __cpuinit probe_pcache(void)
 	case CPU_25KF:
 	case CPU_SB1:
 	case CPU_SB1A:
+	case CPU_XLR:
 		c->dcache.flags |= MIPS_CACHE_PINDEX;
 		break;
 
@@ -1075,7 +1076,6 @@ static int __cpuinit probe_scache(void)
 	unsigned long flags, addr, begin, end, pow2;
 	unsigned int config = read_c0_config();
 	struct cpuinfo_mips *c = &current_cpu_data;
-	int tmp;
 
 	if (config & CONF_SC)
 		return 0;
@@ -1108,7 +1108,6 @@ static int __cpuinit probe_scache(void)
 
 	/* Now search for the wrap around point. */
 	pow2 = (128 * 1024);
-	tmp = 0;
 	for (addr = begin + (128 * 1024); addr < end; addr = begin + pow2) {
 		cache_op(Index_Load_Tag_SD, addr);
 		__asm__ __volatile__("nop; nop; nop; nop;"); /* hazard... */
diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S
index 2d08268bb70..89c412bc4b6 100644
--- a/arch/mips/mm/cex-sb1.S
+++ b/arch/mips/mm/cex-sb1.S
@@ -79,7 +79,7 @@ LEAF(except_vec2_sb1)
 recovered_dcache:
 	/*
 	 * Unlock CacheErr-D (which in turn unlocks CacheErr-DPA).
-	 * Ought to log the occurence of this recovered dcache error.
+	 * Ought to log the occurrence of this recovered dcache error.
 	 */
 	b	recovered
 	 mtc0	$0,C0_CERR_D
diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
new file mode 100644
index 00000000000..ae3c20a9556
--- /dev/null
+++ b/arch/mips/mm/mmap.c
@@ -0,0 +1,122 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+
+unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
+
+EXPORT_SYMBOL(shm_align_mask);
+
+#define COLOUR_ALIGN(addr,pgoff)				\
+	((((addr) + shm_align_mask) & ~shm_align_mask) +	\
+	 (((pgoff) << PAGE_SHIFT) & shm_align_mask))
+
+unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
+	unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct vm_area_struct * vmm;
+	int do_color_align;
+
+	if (len > TASK_SIZE)
+		return -ENOMEM;
+
+	if (flags & MAP_FIXED) {
+		/* Even MAP_FIXED mappings must reside within TASK_SIZE.  */
+		if (TASK_SIZE - len < addr)
+			return -EINVAL;
+
+		/*
+		 * We do not accept a shared mapping if it would violate
+		 * cache aliasing constraints.
+		 */
+		if ((flags & MAP_SHARED) &&
+		    ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
+			return -EINVAL;
+		return addr;
+	}
+
+	do_color_align = 0;
+	if (filp || (flags & MAP_SHARED))
+		do_color_align = 1;
+	if (addr) {
+		if (do_color_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+		else
+			addr = PAGE_ALIGN(addr);
+		vmm = find_vma(current->mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vmm || addr + len <= vmm->vm_start))
+			return addr;
+	}
+	addr = current->mm->mmap_base;
+	if (do_color_align)
+		addr = COLOUR_ALIGN(addr, pgoff);
+	else
+		addr = PAGE_ALIGN(addr);
+
+	for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {
+		/* At this point:  (!vmm || addr < vmm->vm_end). */
+		if (TASK_SIZE - len < addr)
+			return -ENOMEM;
+		if (!vmm || addr + len <= vmm->vm_start)
+			return addr;
+		addr = vmm->vm_end;
+		if (do_color_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+	}
+}
+
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+	unsigned long random_factor = 0UL;
+
+	if (current->flags & PF_RANDOMIZE) {
+		random_factor = get_random_int();
+		random_factor = random_factor << PAGE_SHIFT;
+		if (TASK_IS_32BIT_ADDR)
+			random_factor &= 0xfffffful;
+		else
+			random_factor &= 0xffffffful;
+	}
+
+	mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
+	mm->get_unmapped_area = arch_get_unmapped_area;
+	mm->unmap_area = arch_unmap_area;
+}
+
+static inline unsigned long brk_rnd(void)
+{
+	unsigned long rnd = get_random_int();
+
+	rnd = rnd << PAGE_SHIFT;
+	/* 8MB for 32bit, 256MB for 64bit */
+	if (TASK_IS_32BIT_ADDR)
+		rnd = rnd & 0x7ffffful;
+	else
+		rnd = rnd & 0xffffffful;
+
+	return rnd;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	unsigned long base = mm->brk;
+	unsigned long ret;
+
+	ret = PAGE_ALIGN(base + brk_rnd());
+
+	if (ret < mm->brk)
+		return mm->brk;
+
+	return ret;
+}
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 04f9e17db9d..424ed4b92e6 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -352,7 +352,7 @@ static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
 
 /*
  * Write random or indexed TLB entry, and care about the hazards from
- * the preceeding mtc0 and for the following eret.
+ * the preceding mtc0 and for the following eret.
  */
 enum tlb_write_entry { tlb_random, tlb_indexed };
 
@@ -404,6 +404,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_5KC:
 	case CPU_TX49XX:
 	case CPU_PR4450:
+	case CPU_XLR:
 		uasm_i_nop(p);
 		tlbw(p);
 		break;
@@ -1151,8 +1152,8 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 	struct uasm_reloc *r = relocs;
 	u32 *f;
 	unsigned int final_len;
-	struct mips_huge_tlb_info htlb_info;
-	enum vmalloc64_mode vmalloc_mode;
+	struct mips_huge_tlb_info htlb_info __maybe_unused;
+	enum vmalloc64_mode vmalloc_mode __maybe_unused;
 
 	memset(tlb_handler, 0, sizeof(tlb_handler));
 	memset(labels, 0, sizeof(labels));
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 414f0c99b19..31180c321a1 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -193,8 +193,6 @@ extern struct plat_smp_ops msmtc_smp_ops;
 
 void __init prom_init(void)
 {
-	int result;
-
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -360,20 +358,14 @@ void __init prom_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	console_config();
 #endif
-	/* Early detection of CMP support */
-	result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
-
 #ifdef CONFIG_MIPS_CMP
-	if (result)
+	/* Early detection of CMP support */
+	if (gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ))
 		register_smp_ops(&cmp_smp_ops);
+	else
 #endif
 #ifdef CONFIG_MIPS_MT_SMP
-#ifdef CONFIG_MIPS_CMP
-	if (!result)
 		register_smp_ops(&vsmp_smp_ops);
-#else
-	register_smp_ops(&vsmp_smp_ops);
-#endif
 #endif
 #ifdef CONFIG_MIPS_MT_SMTC
 	register_smp_ops(&msmtc_smp_ops);
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 9027061f0ea..1d36c511a7a 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -56,7 +56,6 @@ static DEFINE_RAW_SPINLOCK(mips_irq_lock);
 static inline int mips_pcibios_iack(void)
 {
 	int irq;
-	u32 dummy;
 
 	/*
 	 * Determine highest priority pending interrupt by performing
@@ -83,7 +82,7 @@ static inline int mips_pcibios_iack(void)
 		BONITO_PCIMAP_CFG = 0x20000;
 
 		/* Flush Bonito register block */
-		dummy = BONITO_PCIMAP_CFG;
+		(void) BONITO_PCIMAP_CFG;
 		iob();    /* sync */
 
 		irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg);
@@ -309,6 +308,8 @@ static void ipi_call_dispatch(void)
 
 static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
 {
+	scheduler_ipi();
+
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
index e67891521ac..49a38b09a48 100644
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@@ -130,7 +130,7 @@ int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
 	 * cleared in the affinity mask, there will never be any
 	 * interrupt forwarding.  But as soon as a program or operator
 	 * sets affinity for one of the related IRQs, we need to make
-	 * sure that we don't ever try to forward across the VPE boundry,
+	 * sure that we don't ever try to forward across the VPE boundary,
 	 * at least not until we engineer a system where the interrupt
 	 * _ack() or _end() function can somehow know that it corresponds
 	 * to an interrupt taken on another VPE, and perform the appropriate
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
new file mode 100644
index 00000000000..a5ca743613f
--- /dev/null
+++ b/arch/mips/netlogic/Kconfig
@@ -0,0 +1,5 @@
+config NLM_COMMON
+	bool
+
+config NLM_XLR
+	bool
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
new file mode 100644
index 00000000000..9bd3f731f62
--- /dev/null
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -0,0 +1,5 @@
+obj-y				+= setup.o platform.o irq.o setup.o time.o
+obj-$(CONFIG_SMP)		+= smp.o smpboot.o
+obj-$(CONFIG_EARLY_PRINTK)	+= xlr_console.o
+
+EXTRA_CFLAGS			+= -Werror
diff --git a/arch/mips/netlogic/xlr/irq.c b/arch/mips/netlogic/xlr/irq.c
new file mode 100644
index 00000000000..1446d58e364
--- /dev/null
+++ b/arch/mips/netlogic/xlr/irq.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/mips-extns.h>
+
+static u64 nlm_irq_mask;
+static DEFINE_SPINLOCK(nlm_pic_lock);
+
+static void xlr_pic_enable(struct irq_data *d)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+	unsigned long flags;
+	nlm_reg_t reg;
+	int irq = d->irq;
+
+	WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq);
+
+	spin_lock_irqsave(&nlm_pic_lock, flags);
+	reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE);
+	netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE,
+			  reg | (1 << 6) | (1 << 30) | (1 << 31));
+	spin_unlock_irqrestore(&nlm_pic_lock, flags);
+}
+
+static void xlr_pic_mask(struct irq_data *d)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+	unsigned long flags;
+	nlm_reg_t reg;
+	int irq = d->irq;
+
+	WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq);
+
+	spin_lock_irqsave(&nlm_pic_lock, flags);
+	reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE);
+	netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE,
+			  reg | (1 << 6) | (1 << 30) | (0 << 31));
+	spin_unlock_irqrestore(&nlm_pic_lock, flags);
+}
+
+#ifdef CONFIG_PCI
+/* Extra ACK needed for XLR on chip PCI controller */
+static void xlr_pci_ack(struct irq_data *d)
+{
+	nlm_reg_t *pci_mmio = netlogic_io_mmio(NETLOGIC_IO_PCIX_OFFSET);
+
+	netlogic_read_reg(pci_mmio, (0x140 >> 2));
+}
+
+/* Extra ACK needed for XLS on chip PCIe controller */
+static void xls_pcie_ack(struct irq_data *d)
+{
+	nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET);
+
+	switch (d->irq) {
+	case PIC_PCIE_LINK0_IRQ:
+		netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff);
+		break;
+	case PIC_PCIE_LINK1_IRQ:
+		netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff);
+		break;
+	case PIC_PCIE_LINK2_IRQ:
+		netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff);
+		break;
+	case PIC_PCIE_LINK3_IRQ:
+		netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff);
+		break;
+	}
+}
+
+/* For XLS B silicon, the 3,4 PCI interrupts are different */
+static void xls_pcie_ack_b(struct irq_data *d)
+{
+	nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET);
+
+	switch (d->irq) {
+	case PIC_PCIE_LINK0_IRQ:
+		netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff);
+		break;
+	case PIC_PCIE_LINK1_IRQ:
+		netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff);
+		break;
+	case PIC_PCIE_XLSB0_LINK2_IRQ:
+		netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff);
+		break;
+	case PIC_PCIE_XLSB0_LINK3_IRQ:
+		netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff);
+		break;
+	}
+}
+#endif
+
+static void xlr_pic_ack(struct irq_data *d)
+{
+	unsigned long flags;
+	nlm_reg_t *mmio;
+	int irq = d->irq;
+	void *hd = irq_data_get_irq_handler_data(d);
+
+	WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq);
+
+	if (hd) {
+		void (*extra_ack)(void *) = hd;
+		extra_ack(d);
+	}
+	mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+	spin_lock_irqsave(&nlm_pic_lock, flags);
+	netlogic_write_reg(mmio, PIC_INT_ACK, (1 << (irq - PIC_IRQ_BASE)));
+	spin_unlock_irqrestore(&nlm_pic_lock, flags);
+}
+
+/*
+ * This chip definition handles interrupts routed thru the XLR
+ * hardware PIC, currently IRQs 8-39 are mapped to hardware intr
+ * 0-31 wired the XLR PIC
+ */
+static struct irq_chip xlr_pic = {
+	.name		= "XLR-PIC",
+	.irq_enable	= xlr_pic_enable,
+	.irq_mask	= xlr_pic_mask,
+	.irq_ack	= xlr_pic_ack,
+};
+
+static void rsvd_irq_handler(struct irq_data *d)
+{
+	WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq);
+}
+
+/*
+ * Chip definition for CPU originated interrupts(timer, msg) and
+ * IPIs
+ */
+struct irq_chip nlm_cpu_intr = {
+	.name		= "XLR-CPU-INTR",
+	.irq_enable	= rsvd_irq_handler,
+	.irq_mask	= rsvd_irq_handler,
+	.irq_ack	= rsvd_irq_handler,
+};
+
+void __init init_xlr_irqs(void)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+	uint32_t thread_mask = 1;
+	int level, i;
+
+	pr_info("Interrupt thread mask [%x]\n", thread_mask);
+	for (i = 0; i < PIC_NUM_IRTS; i++) {
+		level = PIC_IRQ_IS_EDGE_TRIGGERED(i);
+
+		/* Bind all PIC irqs to boot cpu */
+		netlogic_write_reg(mmio, PIC_IRT_0_BASE + i, thread_mask);
+
+		/*
+		 * Use local scheduling and high polarity for all IRTs
+		 * Invalidate all IRTs, by default
+		 */
+		netlogic_write_reg(mmio, PIC_IRT_1_BASE + i,
+				(level << 30) | (1 << 6) | (PIC_IRQ_BASE + i));
+	}
+
+	/* Make all IRQs as level triggered by default */
+	for (i = 0; i < NR_IRQS; i++) {
+		if (PIC_IRQ_IS_IRT(i))
+			irq_set_chip_and_handler(i, &xlr_pic, handle_level_irq);
+		else
+			irq_set_chip_and_handler(i, &nlm_cpu_intr,
+						handle_level_irq);
+	}
+#ifdef CONFIG_SMP
+	irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr,
+			 nlm_smp_function_ipi_handler);
+	irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr,
+			 nlm_smp_resched_ipi_handler);
+	nlm_irq_mask |=
+	    ((1ULL << IRQ_IPI_SMP_FUNCTION) | (1ULL << IRQ_IPI_SMP_RESCHEDULE));
+#endif
+
+#ifdef CONFIG_PCI
+	/*
+	 * For PCI interrupts, we need to ack the PIC controller too, overload
+	 * irq handler data to do this
+	 */
+	if (nlm_chip_is_xls()) {
+		if (nlm_chip_is_xls_b()) {
+			irq_set_handler_data(PIC_PCIE_LINK0_IRQ,
+							xls_pcie_ack_b);
+			irq_set_handler_data(PIC_PCIE_LINK1_IRQ,
+							xls_pcie_ack_b);
+			irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ,
+							xls_pcie_ack_b);
+			irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ,
+							xls_pcie_ack_b);
+		} else {
+			irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack);
+			irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack);
+			irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack);
+			irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack);
+		}
+	} else {
+		/* XLR PCI controller ACK */
+		irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack);
+	}
+#endif
+	/* unmask all PIC related interrupts. If no handler is installed by the
+	 * drivers, it'll just ack the interrupt and return
+	 */
+	for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++)
+		nlm_irq_mask |= (1ULL << i);
+
+	nlm_irq_mask |= (1ULL << IRQ_TIMER);
+}
+
+void __init arch_init_irq(void)
+{
+	/* Initialize the irq descriptors */
+	init_xlr_irqs();
+	write_c0_eimr(nlm_irq_mask);
+}
+
+void __cpuinit nlm_smp_irq_init(void)
+{
+	/* set interrupt mask for non-zero cpus */
+	write_c0_eimr(nlm_irq_mask);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	uint64_t eirr;
+	int i;
+
+	eirr = read_c0_eirr() & read_c0_eimr();
+	if (!eirr)
+		return;
+
+	/* no need of EIRR here, writing compare clears interrupt */
+	if (eirr & (1 << IRQ_TIMER)) {
+		do_IRQ(IRQ_TIMER);
+		return;
+	}
+
+	/* use dcltz: optimize below code */
+	for (i = 63; i != -1; i--) {
+		if (eirr & (1ULL << i))
+			break;
+	}
+	if (i == -1) {
+		pr_err("no interrupt !!\n");
+		return;
+	}
+
+	/* Ack eirr */
+	write_c0_eirr(1ULL << i);
+
+	do_IRQ(i);
+}
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
new file mode 100644
index 00000000000..609ec253464
--- /dev/null
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
+{
+	nlm_reg_t *mmio;
+	unsigned int value;
+
+	/* XLR uart does not need any mapping of regs */
+	mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift));
+	value = netlogic_read_reg(mmio, 0);
+
+	/* See XLR/XLS errata */
+	if (offset == UART_MSR)
+		value ^= 0xF0;
+	else if (offset == UART_MCR)
+		value ^= 0x3;
+
+	return value;
+}
+
+void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
+{
+	nlm_reg_t *mmio;
+
+	/* XLR uart does not need any mapping of regs */
+	mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift));
+
+	/* See XLR/XLS errata */
+	if (offset == UART_MSR)
+		value ^= 0xF0;
+	else if (offset == UART_MCR)
+		value ^= 0x3;
+
+	netlogic_write_reg(mmio, 0, value);
+}
+
+#define PORT(_irq)					\
+	{						\
+		.irq		= _irq,			\
+		.regshift	= 2,			\
+		.iotype		= UPIO_MEM32,		\
+		.flags		= (UPF_SKIP_TEST |	\
+			 UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
+		.uartclk	= PIC_CLKS_PER_SEC,	\
+		.type		= PORT_16550A,		\
+		.serial_in	= nlm_xlr_uart_in,	\
+		.serial_out	= nlm_xlr_uart_out,	\
+	}
+
+static struct plat_serial8250_port xlr_uart_data[] = {
+	PORT(PIC_UART_0_IRQ),
+	PORT(PIC_UART_1_IRQ),
+	{},
+};
+
+static struct platform_device uart_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = xlr_uart_data,
+	},
+};
+
+static int __init nlm_uart_init(void)
+{
+	nlm_reg_t *mmio;
+
+	mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET);
+	xlr_uart_data[0].membase = (void __iomem *)mmio;
+	xlr_uart_data[0].mapbase = CPHYSADDR((unsigned long)mmio);
+
+	mmio = netlogic_io_mmio(NETLOGIC_IO_UART_1_OFFSET);
+	xlr_uart_data[1].membase = (void __iomem *)mmio;
+	xlr_uart_data[1].mapbase = CPHYSADDR((unsigned long)mmio);
+
+	return platform_device_register(&uart_device);
+}
+
+arch_initcall(nlm_uart_init);
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
new file mode 100644
index 00000000000..482802569e7
--- /dev/null
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial_8250.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/smp-ops.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/psb-bootinfo.h>
+
+#include <asm/netlogic/xlr/xlr.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/gpio.h>
+
+unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE);
+unsigned long nlm_common_ebase = 0x0;
+struct psb_info nlm_prom_info;
+
+static void nlm_early_serial_setup(void)
+{
+	struct uart_port s;
+	nlm_reg_t *uart_base;
+
+	uart_base = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET);
+	memset(&s, 0, sizeof(s));
+	s.flags		= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	s.iotype	= UPIO_MEM32;
+	s.regshift	= 2;
+	s.irq		= PIC_UART_0_IRQ;
+	s.uartclk	= PIC_CLKS_PER_SEC;
+	s.serial_in	= nlm_xlr_uart_in;
+	s.serial_out	= nlm_xlr_uart_out;
+	s.mapbase	= (unsigned long)uart_base;
+	s.membase	= (unsigned char __iomem *)uart_base;
+	early_serial_setup(&s);
+}
+
+static void nlm_linux_exit(void)
+{
+	nlm_reg_t *mmio;
+
+	mmio = netlogic_io_mmio(NETLOGIC_IO_GPIO_OFFSET);
+	/* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */
+	netlogic_write_reg(mmio, NETLOGIC_GPIO_SWRESET_REG, 1);
+	for ( ; ; )
+		cpu_wait();
+}
+
+void __init plat_mem_setup(void)
+{
+	panic_timeout	= 5;
+	_machine_restart = (void (*)(char *))nlm_linux_exit;
+	_machine_halt	= nlm_linux_exit;
+	pm_power_off	= nlm_linux_exit;
+}
+
+const char *get_system_type(void)
+{
+	return "Netlogic XLR/XLS Series";
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing yet */
+}
+
+static void build_arcs_cmdline(int *argv)
+{
+	int i, remain, len;
+	char *arg;
+
+	remain = sizeof(arcs_cmdline) - 1;
+	arcs_cmdline[0] = '\0';
+	for (i = 0; argv[i] != 0; i++) {
+		arg = (char *)(long)argv[i];
+		len = strlen(arg);
+		if (len + 1 > remain)
+			break;
+		strcat(arcs_cmdline, arg);
+		strcat(arcs_cmdline, " ");
+		remain -=  len + 1;
+	}
+
+	/* Add the default options here */
+	if ((strstr(arcs_cmdline, "console=")) == NULL) {
+		arg = "console=ttyS0,38400 ";
+		len = strlen(arg);
+		if (len > remain)
+			goto fail;
+		strcat(arcs_cmdline, arg);
+		remain -= len;
+	}
+#ifdef CONFIG_BLK_DEV_INITRD
+	if ((strstr(arcs_cmdline, "rdinit=")) == NULL) {
+		arg = "rdinit=/sbin/init ";
+		len = strlen(arg);
+		if (len > remain)
+			goto fail;
+		strcat(arcs_cmdline, arg);
+		remain -= len;
+	}
+#endif
+	return;
+fail:
+	panic("Cannot add %s, command line too big!", arg);
+}
+
+static void prom_add_memory(void)
+{
+	struct nlm_boot_mem_map *bootm;
+	u64 start, size;
+	u64 pref_backup = 512;  /* avoid pref walking beyond end */
+	int i;
+
+	bootm = (void *)(long)nlm_prom_info.psb_mem_map;
+	for (i = 0; i < bootm->nr_map; i++) {
+		if (bootm->map[i].type != BOOT_MEM_RAM)
+			continue;
+		start = bootm->map[i].addr;
+		size   = bootm->map[i].size;
+
+		/* Work around for using bootloader mem */
+		if (i == 0 && start == 0 && size == 0x0c000000)
+			size = 0x0ff00000;
+
+		add_memory_region(start, size - pref_backup, BOOT_MEM_RAM);
+	}
+}
+
+void __init prom_init(void)
+{
+	int *argv, *envp;		/* passed as 32 bit ptrs */
+	struct psb_info *prom_infop;
+
+	/* truncate to 32 bit and sign extend all args */
+	argv = (int *)(long)(int)fw_arg1;
+	envp = (int *)(long)(int)fw_arg2;
+	prom_infop = (struct psb_info *)(long)(int)fw_arg3;
+
+	nlm_prom_info = *prom_infop;
+
+	nlm_early_serial_setup();
+	build_arcs_cmdline(argv);
+	nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
+	prom_add_memory();
+
+#ifdef CONFIG_SMP
+	nlm_wakeup_secondary_cpus(nlm_prom_info.online_cpu_map);
+	register_smp_ops(&nlm_smp_ops);
+#endif
+}
diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c
new file mode 100644
index 00000000000..b495a7f1433
--- /dev/null
+++ b/arch/mips/netlogic/xlr/smp.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+
+#include <asm/mmu_context.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/mips-extns.h>
+
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+void core_send_ipi(int logical_cpu, unsigned int action)
+{
+	int cpu = cpu_logical_map(logical_cpu);
+	u32 tid = cpu & 0x3;
+	u32 pid = (cpu >> 2) & 0x07;
+	u32 ipi = (tid << 16) | (pid << 20);
+
+	if (action & SMP_CALL_FUNCTION)
+		ipi |= IRQ_IPI_SMP_FUNCTION;
+	else if (action & SMP_RESCHEDULE_YOURSELF)
+		ipi |= IRQ_IPI_SMP_RESCHEDULE;
+	else
+		return;
+
+	pic_send_ipi(ipi);
+}
+
+void nlm_send_ipi_single(int cpu, unsigned int action)
+{
+	core_send_ipi(cpu, action);
+}
+
+void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+	int cpu;
+
+	for_each_cpu(cpu, mask) {
+		core_send_ipi(cpu, action);
+	}
+}
+
+/* IRQ_IPI_SMP_FUNCTION Handler */
+void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc)
+{
+	smp_call_function_interrupt();
+}
+
+/* IRQ_IPI_SMP_RESCHEDULE  handler */
+void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc)
+{
+	set_need_resched();
+}
+
+void nlm_common_ipi_handler(int irq, struct pt_regs *regs)
+{
+	if (irq == IRQ_IPI_SMP_FUNCTION) {
+		smp_call_function_interrupt();
+	} else {
+		/* Announce that we are for reschduling */
+		set_need_resched();
+	}
+}
+
+/*
+ * Called before going into mips code, early cpu init
+ */
+void nlm_early_init_secondary(void)
+{
+	write_c0_ebase((uint32_t)nlm_common_ebase);
+	/* TLB partition here later */
+}
+
+/*
+ * Code to run on secondary just after probing the CPU
+ */
+static void __cpuinit nlm_init_secondary(void)
+{
+	nlm_smp_irq_init();
+}
+
+void nlm_smp_finish(void)
+{
+#ifdef notyet
+	nlm_common_msgring_cpu_init();
+#endif
+}
+
+void nlm_cpus_done(void)
+{
+}
+
+/*
+ * Boot all other cpus in the system, initialize them, and bring them into
+ * the boot function
+ */
+int nlm_cpu_unblock[NR_CPUS];
+int nlm_cpu_ready[NR_CPUS];
+unsigned long nlm_next_gp;
+unsigned long nlm_next_sp;
+cpumask_t phys_cpu_present_map;
+
+void nlm_boot_secondary(int logical_cpu, struct task_struct *idle)
+{
+	unsigned long gp = (unsigned long)task_thread_info(idle);
+	unsigned long sp = (unsigned long)__KSTK_TOS(idle);
+	int cpu = cpu_logical_map(logical_cpu);
+
+	nlm_next_sp = sp;
+	nlm_next_gp = gp;
+
+	/* barrier */
+	__sync();
+	nlm_cpu_unblock[cpu] = 1;
+}
+
+void __init nlm_smp_setup(void)
+{
+	unsigned int boot_cpu;
+	int num_cpus, i;
+
+	boot_cpu = hard_smp_processor_id();
+	cpus_clear(phys_cpu_present_map);
+
+	cpu_set(boot_cpu, phys_cpu_present_map);
+	__cpu_number_map[boot_cpu] = 0;
+	__cpu_logical_map[0] = boot_cpu;
+	cpu_set(0, cpu_possible_map);
+
+	num_cpus = 1;
+	for (i = 0; i < NR_CPUS; i++) {
+		if (nlm_cpu_ready[i]) {
+			cpu_set(i, phys_cpu_present_map);
+			__cpu_number_map[i] = num_cpus;
+			__cpu_logical_map[num_cpus] = i;
+			cpu_set(num_cpus, cpu_possible_map);
+			++num_cpus;
+		}
+	}
+
+	pr_info("Phys CPU present map: %lx, possible map %lx\n",
+		(unsigned long)phys_cpu_present_map.bits[0],
+		(unsigned long)cpu_possible_map.bits[0]);
+
+	pr_info("Detected %i Slave CPU(s)\n", num_cpus);
+}
+
+void nlm_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops nlm_smp_ops = {
+	.send_ipi_single	= nlm_send_ipi_single,
+	.send_ipi_mask		= nlm_send_ipi_mask,
+	.init_secondary		= nlm_init_secondary,
+	.smp_finish		= nlm_smp_finish,
+	.cpus_done		= nlm_cpus_done,
+	.boot_secondary		= nlm_boot_secondary,
+	.smp_setup		= nlm_smp_setup,
+	.prepare_cpus		= nlm_prepare_cpus,
+};
+
+unsigned long secondary_entry_point;
+
+int nlm_wakeup_secondary_cpus(u32 wakeup_mask)
+{
+	unsigned int tid, pid, ipi, i, boot_cpu;
+	void *reset_vec;
+
+	secondary_entry_point = (unsigned long)prom_pre_boot_secondary_cpus;
+	reset_vec = (void *)CKSEG1ADDR(0x1fc00000);
+	memcpy(reset_vec, nlm_boot_smp_nmi, 0x80);
+	boot_cpu = hard_smp_processor_id();
+
+	for (i = 0; i < NR_CPUS; i++) {
+		if (i == boot_cpu)
+			continue;
+		if (wakeup_mask & (1u << i)) {
+			tid = i & 0x3;
+			pid = (i >> 2) & 0x7;
+			ipi = (tid << 16) | (pid << 20) | (1 << 8);
+			pic_send_ipi(ipi);
+		}
+	}
+
+	return 0;
+}
diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/smpboot.S
new file mode 100644
index 00000000000..b8e074402c9
--- /dev/null
+++ b/arch/mips/netlogic/xlr/smpboot.S
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+
+/* Don't jump to linux function from Bootloader stack. Change it
+ * here. Kernel might allocate bootloader memory before all the CPUs are
+ * brought up (eg: Inode cache region) and we better don't overwrite this
+ * memory
+ */
+NESTED(prom_pre_boot_secondary_cpus, 16, sp)
+	.set	mips64
+	mfc0	t0, $15, 1	# read ebase
+	andi	t0, 0x1f	# t0 has the processor_id()
+	sll	t0, 2		# offset in cpu array
+
+	PTR_LA	t1, nlm_cpu_ready # mark CPU ready
+	PTR_ADDU t1, t0
+	li	t2, 1
+	sw	t2, 0(t1)
+
+	PTR_LA	t1, nlm_cpu_unblock
+	PTR_ADDU t1, t0
+1:	lw	t2, 0(t1)	# wait till unblocked
+	beqz	t2, 1b
+	nop
+
+	PTR_LA	t1, nlm_next_sp
+	PTR_L	sp, 0(t1)
+	PTR_LA	t1, nlm_next_gp
+	PTR_L	gp, 0(t1)
+
+	PTR_LA	t0, nlm_early_init_secondary
+	jalr	t0
+	nop
+
+	PTR_LA	t0, smp_bootstrap
+	jr	t0
+	nop
+END(prom_pre_boot_secondary_cpus)
+
+NESTED(nlm_boot_smp_nmi, 0, sp)
+	.set push
+	.set noat
+	.set mips64
+	.set noreorder
+
+	/* Clear the  NMI and BEV bits */
+	MFC0	k0, CP0_STATUS
+	li 	k1, 0xffb7ffff
+	and	k0, k0, k1
+	MTC0	k0, CP0_STATUS
+
+	PTR_LA  k1, secondary_entry_point
+	PTR_L	k0, 0(k1)
+	jr	k0
+	nop
+	.set pop
+END(nlm_boot_smp_nmi)
diff --git a/arch/mips/netlogic/xlr/time.c b/arch/mips/netlogic/xlr/time.c
new file mode 100644
index 00000000000..0d81b262593
--- /dev/null
+++ b/arch/mips/netlogic/xlr/time.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+
+#include <asm/time.h>
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/psb-bootinfo.h>
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+	return IRQ_TIMER;
+}
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = nlm_prom_info.cpu_frequency;
+	pr_info("MIPS counter frequency [%ld]\n",
+		(unsigned long)mips_hpt_frequency);
+}
diff --git a/arch/mips/netlogic/xlr/xlr_console.c b/arch/mips/netlogic/xlr/xlr_console.c
new file mode 100644
index 00000000000..759df069220
--- /dev/null
+++ b/arch/mips/netlogic/xlr/xlr_console.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <asm/netlogic/xlr/iomap.h>
+
+void prom_putchar(char c)
+{
+	nlm_reg_t *mmio;
+
+	mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET);
+	while (netlogic_read_reg(mmio, 0x5) == 0)
+		;
+	netlogic_write_reg(mmio, 0x0, c);
+}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c9209ca6c8e..4df87993744 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
 obj-$(CONFIG_SIBYTE_BCM112X)	+= fixup-sb1250.o pci-sb1250.o
 obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
+obj-$(CONFIG_SOC_XWAY)		+= pci-lantiq.o ops-lantiq.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
@@ -55,6 +56,7 @@ obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
+obj-$(CONFIG_NLM_XLR)		+= pci-xlr.o
 
 ifdef CONFIG_PCI_MSI
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
new file mode 100644
index 00000000000..1f2afb55cc7
--- /dev/null
+++ b/arch/mips/pci/ops-lantiq.c
@@ -0,0 +1,116 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <asm/addrspace.h>
+#include <linux/vmalloc.h>
+
+#include <lantiq_soc.h>
+
+#include "pci-lantiq.h"
+
+#define LTQ_PCI_CFG_BUSNUM_SHF 16
+#define LTQ_PCI_CFG_DEVNUM_SHF 11
+#define LTQ_PCI_CFG_FUNNUM_SHF 8
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
+	unsigned int devfn, unsigned int where, u32 *data)
+{
+	unsigned long cfg_base;
+	unsigned long flags;
+	u32 temp;
+
+	/* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the
+	   SoC itself */
+	if ((bus->number != 0) || ((devfn & 0xf8) > 0x78)
+		|| ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68))
+		return 1;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+
+	cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+	cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn <<
+			LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
+
+	/* Perform access */
+	if (access_type == PCI_ACCESS_WRITE) {
+		ltq_w32(swab32(*data), ((u32 *)cfg_base));
+	} else {
+		*data = ltq_r32(((u32 *)(cfg_base)));
+		*data = swab32(*data);
+	}
+	wmb();
+
+	/* clean possible Master abort */
+	cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+	cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+	temp = ltq_r32(((u32 *)(cfg_base)));
+	temp = swab32(temp);
+	cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+	cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+	ltq_w32(temp, ((u32 *)cfg_base));
+
+	spin_unlock_irqrestore(&ebu_lock, flags);
+
+	if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
+		return 1;
+
+	return 0;
+}
+
+int ltq_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 *val)
+{
+	u32 data = 0;
+
+	if (ltq_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int ltq_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 val)
+{
+	u32 data = 0;
+
+	if (size == 4) {
+		data = val;
+	} else {
+		if (ltq_pci_config_access(PCI_ACCESS_READ, bus,
+				devfn, where, &data))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+		if (size == 1)
+			data = (data & ~(0xff << ((where & 3) << 3))) |
+				(val << ((where & 3) << 3));
+		else if (size == 2)
+			data = (data & ~(0xffff << ((where & 3) << 3))) |
+				(val << ((where & 3) << 3));
+	}
+
+	if (ltq_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 68798f869c0..8fbfbf2b931 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -344,7 +344,7 @@ static irqreturn_t bpci_interrupt(int irq, void *dev_id)
  *                              PCI_ACCESS_WRITE and PCI_ACCESS_READ.
  *
  *               bus          - pointer to the bus number of the device to
- *                              be targetted for the configuration cycle.
+ *                              be targeted for the configuration cycle.
  *                              The only element of the pci_bus structure
  *                              used is bus->number. This argument determines
  *                              if the configuration access will be Type 0 or
@@ -354,7 +354,7 @@ static irqreturn_t bpci_interrupt(int irq, void *dev_id)
  *
  *               devfn        - this is an 8-bit field. The lower three bits
  *                              specify the function number of the device to
- *                              be targetted for the configuration cycle, with
+ *                              be targeted for the configuration cycle, with
  *                              all three-bit combinations being legal. The
  *                              upper five bits specify the device number,
  *                              with legal values being 10 to 31.
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 6f5e24c6ae6..af8c3199696 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -210,7 +210,7 @@ static int __init bcm1480_pcibios_init(void)
 	PCIBIOS_MIN_IO = 0x00008000UL;
 	PCIBIOS_MIN_MEM = 0x01000000UL;
 
-	/* Set I/O resource limits. - unlimited for now to accomodate HT */
+	/* Set I/O resource limits. - unlimited for now to accommodate HT */
 	ioport_resource.end = 0xffffffffUL;
 	iomem_resource.end = 0xffffffffUL;
 
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
new file mode 100644
index 00000000000..603d7493e96
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.c
@@ -0,0 +1,297 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/platform_device.h>
+
+#include <asm/pci.h>
+#include <asm/gpio.h>
+#include <asm/addrspace.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+#include <lantiq_platform.h>
+
+#include "pci-lantiq.h"
+
+#define LTQ_PCI_CFG_BASE		0x17000000
+#define LTQ_PCI_CFG_SIZE		0x00008000
+#define LTQ_PCI_MEM_BASE		0x18000000
+#define LTQ_PCI_MEM_SIZE		0x02000000
+#define LTQ_PCI_IO_BASE			0x1AE00000
+#define LTQ_PCI_IO_SIZE			0x00200000
+
+#define PCI_CR_FCI_ADDR_MAP0		0x00C0
+#define PCI_CR_FCI_ADDR_MAP1		0x00C4
+#define PCI_CR_FCI_ADDR_MAP2		0x00C8
+#define PCI_CR_FCI_ADDR_MAP3		0x00CC
+#define PCI_CR_FCI_ADDR_MAP4		0x00D0
+#define PCI_CR_FCI_ADDR_MAP5		0x00D4
+#define PCI_CR_FCI_ADDR_MAP6		0x00D8
+#define PCI_CR_FCI_ADDR_MAP7		0x00DC
+#define PCI_CR_CLK_CTRL			0x0000
+#define PCI_CR_PCI_MOD			0x0030
+#define PCI_CR_PC_ARB			0x0080
+#define PCI_CR_FCI_ADDR_MAP11hg		0x00E4
+#define PCI_CR_BAR11MASK		0x0044
+#define PCI_CR_BAR12MASK		0x0048
+#define PCI_CR_BAR13MASK		0x004C
+#define PCI_CS_BASE_ADDR1		0x0010
+#define PCI_CR_PCI_ADDR_MAP11		0x0064
+#define PCI_CR_FCI_BURST_LENGTH		0x00E8
+#define PCI_CR_PCI_EOI			0x002C
+#define PCI_CS_STS_CMD			0x0004
+
+#define PCI_MASTER0_REQ_MASK_2BITS	8
+#define PCI_MASTER1_REQ_MASK_2BITS	10
+#define PCI_MASTER2_REQ_MASK_2BITS	12
+#define INTERNAL_ARB_ENABLE_BIT		0
+
+#define LTQ_CGU_IFCCR		0x0018
+#define LTQ_CGU_PCICR		0x0034
+
+#define ltq_pci_w32(x, y)	ltq_w32((x), ltq_pci_membase + (y))
+#define ltq_pci_r32(x)		ltq_r32(ltq_pci_membase + (x))
+
+#define ltq_pci_cfg_w32(x, y)	ltq_w32((x), ltq_pci_mapped_cfg + (y))
+#define ltq_pci_cfg_r32(x)	ltq_r32(ltq_pci_mapped_cfg + (x))
+
+struct ltq_pci_gpio_map {
+	int pin;
+	int alt0;
+	int alt1;
+	int dir;
+	char *name;
+};
+
+/* the pci core can make use of the following gpios */
+static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
+	{ 0, 1, 0, 0, "pci-exin0" },
+	{ 1, 1, 0, 0, "pci-exin1" },
+	{ 2, 1, 0, 0, "pci-exin2" },
+	{ 39, 1, 0, 0, "pci-exin3" },
+	{ 10, 1, 0, 0, "pci-exin4" },
+	{ 9, 1, 0, 0, "pci-exin5" },
+	{ 30, 1, 0, 1, "pci-gnt1" },
+	{ 23, 1, 0, 1, "pci-gnt2" },
+	{ 19, 1, 0, 1, "pci-gnt3" },
+	{ 38, 1, 0, 1, "pci-gnt4" },
+	{ 29, 1, 0, 0, "pci-req1" },
+	{ 31, 1, 0, 0, "pci-req2" },
+	{ 3, 1, 0, 0, "pci-req3" },
+	{ 37, 1, 0, 0, "pci-req4" },
+};
+
+__iomem void *ltq_pci_mapped_cfg;
+static __iomem void *ltq_pci_membase;
+
+int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
+
+/* Since the PCI REQ pins can be reused for other functionality, make it
+   possible to exclude those from interpretation by the PCI controller */
+static int ltq_pci_req_mask = 0xf;
+
+static int *ltq_pci_irq_map;
+
+struct pci_ops ltq_pci_ops = {
+	.read	= ltq_pci_read_config_dword,
+	.write	= ltq_pci_write_config_dword
+};
+
+static struct resource pci_io_resource = {
+	.name	= "pci io space",
+	.start	= LTQ_PCI_IO_BASE,
+	.end	= LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+	.name	= "pci memory space",
+	.start	= LTQ_PCI_MEM_BASE,
+	.end	= LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+static struct pci_controller ltq_pci_controller = {
+	.pci_ops	= &ltq_pci_ops,
+	.mem_resource	= &pci_mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_resource	= &pci_io_resource,
+	.io_offset	= 0x00000000UL,
+};
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	if (ltqpci_plat_dev_init)
+		return ltqpci_plat_dev_init(dev);
+
+	return 0;
+}
+
+static u32 ltq_calc_bar11mask(void)
+{
+	u32 mem, bar11mask;
+
+	/* BAR11MASK value depends on available memory on system. */
+	mem = num_physpages * PAGE_SIZE;
+	bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
+
+	return bar11mask;
+}
+
+static void ltq_pci_setup_gpio(int gpio)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
+		if (gpio & (1 << i)) {
+			ltq_gpio_request(ltq_pci_gpio_map[i].pin,
+				ltq_pci_gpio_map[i].alt0,
+				ltq_pci_gpio_map[i].alt1,
+				ltq_pci_gpio_map[i].dir,
+				ltq_pci_gpio_map[i].name);
+		}
+	}
+	ltq_gpio_request(21, 0, 0, 1, "pci-reset");
+	ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
+}
+
+static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
+{
+	u32 temp_buffer;
+
+	/* set clock to 33Mhz */
+	ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
+	ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
+
+	/* external or internal clock ? */
+	if (conf->clock) {
+		ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16),
+			LTQ_CGU_IFCCR);
+		ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR);
+	} else {
+		ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16),
+			LTQ_CGU_IFCCR);
+		ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR);
+	}
+
+	/* setup pci clock and gpis used by pci */
+	ltq_pci_setup_gpio(conf->gpio);
+
+	/* enable auto-switching between PCI and EBU */
+	ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
+
+	/* busy, i.e. configuration is not done, PCI access has to be retried */
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
+	wmb();
+	/* BUS Master/IO/MEM access */
+	ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
+
+	/* enable external 2 PCI masters */
+	temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
+	temp_buffer &= (~(ltq_pci_req_mask << 16));
+	/* enable internal arbiter */
+	temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
+	/* enable internal PCI master reqest */
+	temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
+
+	/* enable EBU request */
+	temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
+
+	/* enable all external masters request */
+	temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
+	ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
+	wmb();
+
+	/* setup BAR memory regions */
+	ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
+	ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
+	ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
+	ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
+	ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
+	ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
+	ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
+	ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
+	ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
+	ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
+	ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
+	ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
+	/* both TX and RX endian swap are enabled */
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
+	wmb();
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
+		PCI_CR_BAR12MASK);
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
+		PCI_CR_BAR13MASK);
+	/*use 8 dw burst length */
+	ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
+	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
+	wmb();
+
+	/* setup irq line */
+	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
+	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
+
+	/* toggle reset pin */
+	__gpio_set_value(21, 0);
+	wmb();
+	mdelay(1);
+	__gpio_set_value(21, 1);
+	return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (ltq_pci_irq_map[slot])
+		return ltq_pci_irq_map[slot];
+	printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
+		slot);
+
+	return 0;
+}
+
+static int __devinit ltq_pci_probe(struct platform_device *pdev)
+{
+	struct ltq_pci_data *ltq_pci_data =
+		(struct ltq_pci_data *) pdev->dev.platform_data;
+	pci_probe_only = 0;
+	ltq_pci_irq_map = ltq_pci_data->irq;
+	ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
+	ltq_pci_mapped_cfg =
+		ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
+	ltq_pci_controller.io_map_base =
+		(unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
+	ltq_pci_startup(ltq_pci_data);
+	register_pci_controller(&ltq_pci_controller);
+
+	return 0;
+}
+
+static struct platform_driver
+ltq_pci_driver = {
+	.probe = ltq_pci_probe,
+	.driver = {
+		.name = "ltq_pci",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init pcibios_init(void)
+{
+	int ret = platform_driver_register(&ltq_pci_driver);
+	if (ret)
+		printk(KERN_INFO "ltq_pci: Error registering platfom driver!");
+	return ret;
+}
+
+arch_initcall(pcibios_init);
diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
new file mode 100644
index 00000000000..66bf6cd6be3
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.h
@@ -0,0 +1,18 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_PCI_H__
+#define _LTQ_PCI_H__
+
+extern __iomem void *ltq_pci_mapped_cfg;
+extern int ltq_pci_read_config_dword(struct pci_bus *bus,
+	unsigned int devfn, int where, int size, u32 *val);
+extern int ltq_pci_write_config_dword(struct pci_bus *bus,
+	unsigned int devfn, int where, int size, u32 val);
+
+#endif
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 2d74fc9ae3b..ed1c54284b8 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -441,7 +441,7 @@ static void octeon_pci_initialize(void)
 
 	/*
 	 * TDOMC must be set to one in PCI mode. TDOMC should be set to 4
-	 * in PCI-X mode to allow four oustanding splits. Otherwise,
+	 * in PCI-X mode to allow four outstanding splits. Otherwise,
 	 * should not change from its reset value. Don't write PCI_CFG19
 	 * in PCI mode (0x82000001 reset value), write it to 0x82000004
 	 * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero.
@@ -515,7 +515,7 @@ static void octeon_pci_initialize(void)
 #endif	/* USE_OCTEON_INTERNAL_ARBITER */
 
 	/*
-	 * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
+	 * Preferably written to 1 to set MLTD. [RDSATI,TRTAE,
 	 * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to
 	 * 1..7.
 	 */
diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
new file mode 100644
index 00000000000..38fece16c43
--- /dev/null
+++ b/arch/mips/pci/pci-xlr.c
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+static void *pci_config_base;
+
+#define	pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off))
+
+/* PCI ops */
+static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn,
+	int where)
+{
+	u32 data;
+	u32 *cfgaddr;
+
+	cfgaddr = (u32 *)(pci_config_base +
+			pci_cfg_addr(bus->number, devfn, where & ~3));
+	data = *cfgaddr;
+	return cpu_to_le32(data);
+}
+
+static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn,
+	int where, u32 data)
+{
+	u32 *cfgaddr;
+
+	cfgaddr = (u32 *)(pci_config_base +
+			pci_cfg_addr(bus->number, devfn, where & ~3));
+	*cfgaddr = cpu_to_le32(data);
+}
+
+static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 *val)
+{
+	u32 data;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	data = pci_cfg_read_32bit(bus, devfn, where);
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+		int where, int size, u32 val)
+{
+	u32 data;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	data = pci_cfg_read_32bit(bus, devfn, where);
+
+	if (size == 1)
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+	else if (size == 2)
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+	else
+		data = val;
+
+	pci_cfg_write_32bit(bus, devfn, where, data);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops nlm_pci_ops = {
+	.read  = nlm_pcibios_read,
+	.write = nlm_pcibios_write
+};
+
+static struct resource nlm_pci_mem_resource = {
+	.name           = "XLR PCI MEM",
+	.start          = 0xd0000000UL,	/* 256MB PCI mem @ 0xd000_0000 */
+	.end            = 0xdfffffffUL,
+	.flags          = IORESOURCE_MEM,
+};
+
+static struct resource nlm_pci_io_resource = {
+	.name           = "XLR IO MEM",
+	.start          = 0x10000000UL,	/* 16MB PCI IO @ 0x1000_0000 */
+	.end            = 0x100fffffUL,
+	.flags          = IORESOURCE_IO,
+};
+
+struct pci_controller nlm_pci_controller = {
+	.index          = 0,
+	.pci_ops        = &nlm_pci_ops,
+	.mem_resource   = &nlm_pci_mem_resource,
+	.mem_offset     = 0x00000000UL,
+	.io_resource    = &nlm_pci_io_resource,
+	.io_offset      = 0x00000000UL,
+};
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (!nlm_chip_is_xls())
+		return	PIC_PCIX_IRQ;	/* for XLR just one IRQ*/
+
+	/*
+	 * For XLS PCIe, there is an IRQ per Link, find out which
+	 * link the device is on to assign interrupts
+	*/
+	if (dev->bus->self == NULL)
+		return 0;
+
+	switch	(dev->bus->self->devfn) {
+	case 0x0:
+		return PIC_PCIE_LINK0_IRQ;
+	case 0x8:
+		return PIC_PCIE_LINK1_IRQ;
+	case 0x10:
+		if (nlm_chip_is_xls_b())
+			return PIC_PCIE_XLSB0_LINK2_IRQ;
+		else
+			return PIC_PCIE_LINK2_IRQ;
+	case 0x18:
+		if (nlm_chip_is_xls_b())
+			return PIC_PCIE_XLSB0_LINK3_IRQ;
+		else
+			return PIC_PCIE_LINK3_IRQ;
+	}
+	WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
+	return 0;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static int __init pcibios_init(void)
+{
+	/* PSB assigns PCI resources */
+	pci_probe_only = 1;
+	pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20);
+
+	/* Extend IO port for memory mapped io */
+	ioport_resource.start =  0;
+	ioport_resource.end   = ~0;
+
+	set_io_port_base(CKSEG1);
+	nlm_pci_controller.io_map_base = CKSEG1;
+
+	pr_info("Registering XLR/XLS PCIX/PCIE Controller.\n");
+	register_pci_controller(&nlm_pci_controller);
+
+	return 0;
+}
+
+arch_initcall(pcibios_init);
+
+struct pci_fixup pcibios_fixups[] = {
+	{0}
+};
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 38bc28005b4..33bba7bff25 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -125,7 +125,7 @@ void __devinit register_pci_controller(struct pci_controller *hose)
 	hose_tail = &hose->next;
 
 	/*
-	 * Do not panic here but later - this might hapen before console init.
+	 * Do not panic here but later - this might happen before console init.
 	 */
 	if (!hose->io_map_base) {
 		printk(KERN_WARNING
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c
index f9b9dcdfa9d..98fd0099d96 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c
@@ -97,7 +97,7 @@ static int msp_per_irq_set_affinity(struct irq_data *d,
 
 static struct irq_chip msp_per_irq_controller = {
 	.name = "MSP_PER",
-	.irq_enable = unmask_per_irq.
+	.irq_enable = unmask_per_irq,
 	.irq_disable = mask_per_irq,
 	.irq_ack = msp_per_irq_ack,
 #ifdef CONFIG_SMP
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
index fb37a10e030..2413ea67877 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
@@ -239,7 +239,7 @@ void __init prom_init(void)
 #ifdef CONFIG_PMCTWILED
 	/*
 	 * Setup LED states before the subsys_initcall loads other
-	 * dependant drivers/modules.
+	 * dependent drivers/modules.
 	 */
 	pmctwiled_setup();
 #endif
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index efc9e889b34..2608752898c 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -55,6 +55,8 @@ void titan_mailbox_irq(void)
 
 		if (status & 0x2)
 			smp_call_function_interrupt();
+		if (status & 0x4)
+			scheduler_ipi();
 		break;
 
 	case 1:
@@ -63,6 +65,8 @@ void titan_mailbox_irq(void)
 
 		if (status & 0x2)
 			smp_call_function_interrupt();
+		if (status & 0x4)
+			scheduler_ipi();
 		break;
 	}
 }
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index ce45df17fd0..87167dcc79f 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -165,7 +165,7 @@ static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
 	{
 		.base = PNX833X_I2C0_PORTS_START,
 		.irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */
-		.clock = 6,	/* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */
+		.clock = 6,	/* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Preferred HDCP) */
 		.bus_addr = 0,	/* no slave support */
 	},
 	{
diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index dbb5c7b4b70..f8a751c0328 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -35,7 +35,7 @@ LEAF(swsusp_arch_resume)
 0:
 	PTR_L t1, PBE_ADDRESS(t0)   /* source */
 	PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */
-	PTR_ADDIU t3, t1, PAGE_SIZE
+	PTR_ADDU t3, t1, PAGE_SIZE
 1:
 	REG_L t8, (t1)
 	REG_S t8, (t2)
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 37de05d595e..6c47dfeb7be 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -185,7 +185,7 @@ int __init rb532_gpio_init(void)
 	struct resource *r;
 
 	r = rb532_gpio_reg0_res;
-	rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
+	rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r));
 
 	if (!rb532_gpio_chip->regbase) {
 		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index deddbf0ebe5..698904daf90 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -132,7 +132,7 @@ static struct platform_device eth1_device = {
  */
 static int __init sgiseeq_devinit(void)
 {
-	unsigned int tmp;
+	unsigned int pbdma __maybe_unused;
 	int res, i;
 
 	eth0_pd.hpc = hpc3c0;
@@ -151,7 +151,7 @@ static int __init sgiseeq_devinit(void)
 
 	/* Second HPC is missing? */
 	if (ip22_is_fullhouse() ||
-	    get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
+	    get_dbe(pbdma, (unsigned int *)&hpc3c1->pbdma[1]))
 		return 0;
 
 	sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 |
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 603fc91c103..1a94c989418 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -32,7 +32,7 @@
 static unsigned long dosample(void)
 {
 	u32 ct0, ct1;
-	u8 msb, lsb;
+	u8 msb;
 
 	/* Start the counter. */
 	sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
@@ -46,7 +46,7 @@ static unsigned long dosample(void)
 	/* Latch and spin until top byte of counter2 is zero */
 	do {
 		writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword);
-		lsb = readb(&sgint->tcnt2);
+		(void) readb(&sgint->tcnt2);
 		msb = readb(&sgint->tcnt2);
 		ct1 = read_c0_count();
 	} while (msb);
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
index 5e960ae9735..bc5e9769bb7 100644
--- a/arch/mips/sgi-ip27/Kconfig
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -1,7 +1,7 @@
 #config SGI_SN0_XXL
 #	bool "IP27 XXL"
 #	depends on SGI_IP27
-#	  This options adds support for userspace processes upto 16TB size.
+#	  This options adds support for userspace processes up to 16TB size.
 #	  Normally the limit is just .5TB.
 
 choice
diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO
index 19f1512c8f2..160857ff148 100644
--- a/arch/mips/sgi-ip27/TODO
+++ b/arch/mips/sgi-ip27/TODO
@@ -13,7 +13,7 @@ being invoked on all nodes in ip27-memory.c.
 9. start_thread must turn off UX64 ... and define tlb_refill_debug.
 10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable
 does not agree with pgd_bad/pmd_bad.
-11. All intrs (ip27_do_irq handlers) are targetted at cpu A on the node.
+11. All intrs (ip27_do_irq handlers) are targeted at cpu A on the node.
 This might need to change later. Only the timer intr is set up to be
 received on both Cpu A and B. (ip27_do_irq()/bridge_startup())
 13. Cache flushing (specially the SMP version) has to be investigated.
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index a1fa4abb3f6..cd0d5b06cd8 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@@ -29,7 +29,6 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
 			  unsigned long xtalk_addr, size_t size)
 {
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
-	volatile hubreg_t junk;
 	unsigned i;
 
 	/* use small-window mapping if possible */
@@ -64,7 +63,7 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
 		 * after we write it.
 		 */
 		IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
-		junk = HUB_L(IIO_ITTE_GET(nasid, i));
+		(void) HUB_L(IIO_ITTE_GET(nasid, i));
 
 		return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
 	}
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 51d3a4f2d7e..923c080f77b 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -93,7 +93,7 @@ static void __cpuinit per_hub_init(cnodeid_t cnode)
 
 	/*
 	 * Some interrupts are reserved by hardware or by software convention.
-	 * Mark these as reserved right away so they won't be used accidently
+	 * Mark these as reserved right away so they won't be used accidentally
 	 * later.
 	 */
 	for (i = 0; i <= BASE_PCI_IRQ; i++) {
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 11488719dd9..b18b04e4857 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -41,7 +41,7 @@
  * Linux has a controller-independent x86 interrupt architecture.
  * every controller has a 'controller-template', that is used
  * by the main code to do the right thing. Each driver-visible
- * interrupt source is transparently wired to the apropriate
+ * interrupt source is transparently wired to the appropriate
  * controller. Thus drivers need not be aware of the
  * interrupt-controller.
  *
@@ -147,8 +147,10 @@ static void ip27_do_irq_mask0(void)
 #ifdef CONFIG_SMP
 	if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
 		LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
+		scheduler_ipi();
 	} else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) {
 		LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
+		scheduler_ipi();
 	} else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
 		LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
 		smp_call_function_interrupt();
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index c3d30a88daf..1d1919a44e8 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -54,11 +54,8 @@ void __init setup_replication_mask(void)
 
 static __init void set_ktext_source(nasid_t client_nasid, nasid_t server_nasid)
 {
-	cnodeid_t client_cnode;
 	kern_vars_t *kvp;
 
-	client_cnode = NASID_TO_COMPACT_NODEID(client_nasid);
-
 	kvp = &hub_data(client_nasid)->kern_vars;
 
 	KERN_VARS_ADDR(client_nasid) = (unsigned long)kvp;
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index a152538d3c9..ef74f3267f9 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -66,18 +66,7 @@ static int rt_next_event(unsigned long delta, struct clock_event_device *evt)
 static void rt_set_mode(enum clock_event_mode mode,
 		struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* The only mode supported */
-		break;
-
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Nothing to do  */
-		break;
-	}
+	/* Nothing to do ...  */
 }
 
 int rt_timer_irq;
@@ -174,8 +163,7 @@ static void __init hub_rt_clocksource_init(void)
 {
 	struct clocksource *cs = &hub_rt_clocksource;
 
-	clocksource_set_clock(cs, CYCLES_PER_SEC);
-	clocksource_register(cs);
+	clocksource_register_hz(cs, CYCLES_PER_SEC);
 }
 
 void __init plat_time_init(void)
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index 47b347c992e..d667875be56 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/smp.h>
 #include <linux/kernel_stat.h>
+#include <linux/sched.h>
 
 #include <asm/mmu_context.h>
 #include <asm/io.h>
@@ -189,10 +190,8 @@ void bcm1480_mailbox_interrupt(void)
 	/* Clear the mailbox to clear the interrupt */
 	__raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
 
-	/*
-	 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
-	 * interrupt will do the reschedule for us
-	 */
+	if (action & SMP_RESCHEDULE_YOURSELF)
+		scheduler_ipi();
 
 	if (action & SMP_CALL_FUNCTION)
 		smp_call_function_interrupt();
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index c00a5cb1128..38e7f6bd792 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/kernel_stat.h>
+#include <linux/sched.h>
 
 #include <asm/mmu_context.h>
 #include <asm/io.h>
@@ -177,10 +178,8 @@ void sb1250_mailbox_interrupt(void)
 	/* Clear the mailbox to clear the interrupt */
 	____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
 
-	/*
-	 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
-	 * interrupt will do the reschedule for us
-	 */
+	if (action & SMP_RESCHEDULE_YOURSELF)
+		scheduler_ipi();
 
 	if (action & SMP_CALL_FUNCTION)
 		smp_call_function_interrupt();
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index c76151b5656..0904d4d30cb 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -95,7 +95,7 @@ static void __init sni_a20r_timer_setup(void)
 static __init unsigned long dosample(void)
 {
 	u32 ct0, ct1;
-	volatile u8 msb, lsb;
+	volatile u8 msb;
 
 	/* Start the counter. */
 	outb_p(0x34, 0x43);
@@ -108,7 +108,7 @@ static __init unsigned long dosample(void)
 	/* Latch and spin until top byte of counter0 is zero */
 	do {
 		outb(0x00, 0x43);
-		lsb = inb(0x40);
+		(void) inb(0x40);
 		msb = inb(0x40);
 		ct1 = read_c0_count();
 	} while (msb);
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 3dc19f48295..e9f95dcde37 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -318,19 +318,15 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
 }
 
 #if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
-static int tx4939_get_eth_speed(struct net_device *dev)
+static u32 tx4939_get_eth_speed(struct net_device *dev)
 {
-	struct ethtool_cmd cmd = { ETHTOOL_GSET };
-	int speed = 100;	/* default 100Mbps */
-	int err;
-	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
-		return speed;
-	err = dev->ethtool_ops->get_settings(dev, &cmd);
-	if (err < 0)
-		return speed;
-	speed = cmd.speed == SPEED_100 ? 100 : 10;
-	return speed;
+	struct ethtool_cmd cmd;
+	if (dev_ethtool_get_settings(dev, &cmd))
+		return 100;	/* default 100Mbps */
+
+	return ethtool_cmd_speed(&cmd);
 }
+
 static int tx4939_netdev_event(struct notifier_block *this,
 			       unsigned long event,
 			       void *ptr)
@@ -343,8 +339,7 @@ static int tx4939_netdev_event(struct notifier_block *this,
 		else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1))
 			bit = TX4939_PCFG_SPEED1;
 		if (bit) {
-			int speed = tx4939_get_eth_speed(dev);
-			if (speed == 100)
+			if (tx4939_get_eth_speed(dev) == 100)
 				txx9_set64(&tx4939_ccfgptr->pcfg, bit);
 			else
 				txx9_clear64(&tx4939_ccfgptr->pcfg, bit);
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index a523c94fa69..feaf09cc863 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -2,7 +2,6 @@ config MN10300
 	def_bool y
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_KGDB
diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h
index 90ed4a365c9..c54effae220 100644
--- a/arch/mn10300/include/asm/cpu-regs.h
+++ b/arch/mn10300/include/asm/cpu-regs.h
@@ -49,7 +49,7 @@ asm(" .am33_2\n");
 #define EPSW_IM_6		0x00000600	/* interrupt mode 6 */
 #define EPSW_IM_7		0x00000700	/* interrupt mode 7 */
 #define EPSW_IE			0x00000800	/* interrupt enable */
-#define EPSW_S			0x00003000	/* software auxilliary bits */
+#define EPSW_S			0x00003000	/* software auxiliary bits */
 #define EPSW_T			0x00008000	/* trace enable */
 #define EPSW_nSL		0x00010000	/* not supervisor level */
 #define EPSW_NMID		0x00020000	/* nonmaskable interrupt disable */
diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c
index 226c826a219..83fb2791223 100644
--- a/arch/mn10300/kernel/smp.c
+++ b/arch/mn10300/kernel/smp.c
@@ -494,14 +494,11 @@ void smp_send_stop(void)
  * @irq: The interrupt number.
  * @dev_id: The device ID.
  *
- * We need do nothing here, since the scheduling will be effected on our way
- * back through entry.S.
- *
  * Returns IRQ_HANDLED to indicate we handled the interrupt successfully.
  */
 static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id)
 {
-	/* do nothing */
+	scheduler_ipi();
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9b1f427cdc3..69ff049c857 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -15,7 +15,6 @@ config PARISC
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select IRQ_PER_CPU
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff --git a/arch/parisc/include/asm/eisa_eeprom.h b/arch/parisc/include/asm/eisa_eeprom.h
index 9c9da980402..8ce8b85ca58 100644
--- a/arch/parisc/include/asm/eisa_eeprom.h
+++ b/arch/parisc/include/asm/eisa_eeprom.h
@@ -27,7 +27,7 @@ struct eeprom_header
 	u_int8_t  ver_maj;
 	u_int8_t  ver_min;
 	u_int8_t  num_slots;        /* number of EISA slots in system */
-	u_int16_t csum;             /* checksum, I don't know how to calulate this */
+	u_int16_t csum;             /* checksum, I don't know how to calculate this */
 	u_int8_t  pad[10];
 } __attribute__ ((packed));
 
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index e5477092a5d..ead8d2a1034 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -187,8 +187,8 @@
 
 	/* Register definitions for tlb miss handler macros */
 
-	va  = r8	/* virtual address for which the trap occured */
-	spc = r24	/* space for which the trap occured */
+	va  = r8	/* virtual address for which the trap occurred */
+	spc = r24	/* space for which the trap occurred */
 
 #ifndef CONFIG_64BIT
 
@@ -882,7 +882,7 @@ ENTRY(syscall_exit_rfi)
 	 * (we don't store them in the sigcontext), so set them
 	 * to "proper" values now (otherwise we'll wind up restoring
 	 * whatever was last stored in the task structure, which might
-	 * be inconsistent if an interrupt occured while on the gateway
+	 * be inconsistent if an interrupt occurred while on the gateway
 	 * page). Note that we may be "trashing" values the user put in
 	 * them, but we don't support the user changing them.
 	 */
@@ -1156,11 +1156,11 @@ ENDPROC(intr_save)
 	 */
 
 	t0 = r1		/* temporary register 0 */
-	va = r8		/* virtual address for which the trap occured */
+	va = r8		/* virtual address for which the trap occurred */
 	t1 = r9		/* temporary register 1 */
 	pte  = r16	/* pte/phys page # */
 	prot = r17	/* prot bits */
-	spc  = r24	/* space for which the trap occured */
+	spc  = r24	/* space for which the trap occurred */
 	ptp = r25	/* page directory/page table pointer */
 
 #ifdef CONFIG_64BIT
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 4dbdf0ed6fa..145c5e4caaa 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -131,7 +131,7 @@ $pgt_fill_loop:
 	ldo             THREAD_SZ_ALGN(%r6),%sp
 
 #ifdef CONFIG_SMP
-	/* Set the smp rendevous address into page zero.
+	/* Set the smp rendezvous address into page zero.
 	** It would be safer to do this in init_smp_config() but
 	** it's just way easier to deal with here because
 	** of 64-bit function ptrs and the address is local to this file.
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index d228d823787..08324aac354 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -93,7 +93,7 @@ void __init setup_pdc(void)
 	case 0x6:		/* 705, 710 */
 	case 0x7:		/* 715, 725 */
 	case 0x8:		/* 745, 747, 742 */
-	case 0xA:		/* 712 and similiar */
+	case 0xA:		/* 712 and similar */
 	case 0xC:		/* 715/64, at least */
 
 		pdc_type = PDC_TYPE_SNAKE;
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 609a331878e..12c1ed33dc1 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -291,7 +291,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &frame->uc);
 		DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &frame->uc.uc_mcontext);
 		err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, in_syscall);
-		/* FIXME: Should probably be converted aswell for the compat case */
+		/* FIXME: Should probably be converted as well for the compat case */
 		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	}
 	
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 69d63d354ef..828305f19cf 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -155,10 +155,7 @@ ipi_interrupt(int irq, void *dev_id)
 				
 			case IPI_RESCHEDULE:
 				smp_debug(100, KERN_DEBUG "CPU%d IPI_RESCHEDULE\n", this_cpu);
-				/*
-				 * Reschedule callback.  Everything to be
-				 * done is done by the interrupt return path.
-				 */
+				scheduler_ipi();
 				break;
 
 			case IPI_CALL_FUNC:
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 68e75ce838d..82a52b2fb13 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -605,7 +605,7 @@ cas_action:
 	copy	%r0, %r21
 
 3:		
-	/* Error occured on load or store */
+	/* Error occurred on load or store */
 	/* Free lock */
 	stw	%r20, 0(%sr2,%r20)
 #if ENABLE_LWS_DEBUG
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 74867dfdabe..4be85ee10b8 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -34,7 +34,7 @@
 /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and
  * narrow palinux.  Use ENTRY_DIFF for those where a 32-bit specific
  * implementation is required on wide palinux.  Use ENTRY_COMP where
- * the compatability layer has a useful 32-bit implementation.
+ * the compatibility layer has a useful 32-bit implementation.
  */
 #define ENTRY_SAME(_name_) .dword sys_##_name_
 #define ENTRY_DIFF(_name_) .dword sys32_##_name_
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 8f1e4efd143..2d9a5c7c76f 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -69,6 +69,9 @@ SECTIONS
 	/* End of text section */
 	_etext = .;
 
+	/* Start of data section */
+	_sdata = .;
+
 	RODATA
 
 	/* writeable */
diff --git a/arch/parisc/math-emu/dfadd.c b/arch/parisc/math-emu/dfadd.c
index e147d7d3b0f..d37e2d2cb6f 100644
--- a/arch/parisc/math-emu/dfadd.c
+++ b/arch/parisc/math-emu/dfadd.c
@@ -303,7 +303,7 @@ dbl_fadd(
 	if(Dbl_iszero_hidden(resultp1))
 	    {
 	    /* Handle normalization */
-	    /* A straight foward algorithm would now shift the result
+	    /* A straight forward algorithm would now shift the result
 	     * and extension left until the hidden bit becomes one.  Not
 	     * all of the extension bits need participate in the shift.
 	     * Only the two most significant bits (round and guard) are
diff --git a/arch/parisc/math-emu/dfsub.c b/arch/parisc/math-emu/dfsub.c
index 87ebc60d465..2e8b5a79bff 100644
--- a/arch/parisc/math-emu/dfsub.c
+++ b/arch/parisc/math-emu/dfsub.c
@@ -306,7 +306,7 @@ dbl_fsub(
 	if(Dbl_iszero_hidden(resultp1))
 	    {
 	    /* Handle normalization */
-	    /* A straight foward algorithm would now shift the result
+	    /* A straight forward algorithm would now shift the result
 	     * and extension left until the hidden bit becomes one.  Not
 	     * all of the extension bits need participate in the shift.
 	     * Only the two most significant bits (round and guard) are
diff --git a/arch/parisc/math-emu/fmpyfadd.c b/arch/parisc/math-emu/fmpyfadd.c
index 5dd7f93a89b..b067c45c872 100644
--- a/arch/parisc/math-emu/fmpyfadd.c
+++ b/arch/parisc/math-emu/fmpyfadd.c
@@ -531,7 +531,7 @@ dbl_fmpyfadd(
 		sign_save = Dbl_signextendedsign(resultp1);
 		if (Dbl_iszero_hidden(resultp1)) {
 			/* Handle normalization */
-		/* A straight foward algorithm would now shift the
+		/* A straightforward algorithm would now shift the
 		 * result and extension left until the hidden bit
 		 * becomes one.  Not all of the extension bits need
 		 * participate in the shift.  Only the two most 
@@ -1191,7 +1191,7 @@ unsigned int *status;
 		sign_save = Dbl_signextendedsign(resultp1);
 		if (Dbl_iszero_hidden(resultp1)) {
 			/* Handle normalization */
-		/* A straight foward algorithm would now shift the
+		/* A straightforward algorithm would now shift the
 		 * result and extension left until the hidden bit
 		 * becomes one.  Not all of the extension bits need
 		 * participate in the shift.  Only the two most 
@@ -1841,7 +1841,7 @@ unsigned int *status;
 		sign_save = Sgl_signextendedsign(resultp1);
 		if (Sgl_iszero_hidden(resultp1)) {
 			/* Handle normalization */
-		/* A straight foward algorithm would now shift the
+		/* A straightforward algorithm would now shift the
 		 * result and extension left until the hidden bit
 		 * becomes one.  Not all of the extension bits need
 		 * participate in the shift.  Only the two most 
@@ -2483,7 +2483,7 @@ unsigned int *status;
 		sign_save = Sgl_signextendedsign(resultp1);
 		if (Sgl_iszero_hidden(resultp1)) {
 			/* Handle normalization */
-		/* A straight foward algorithm would now shift the
+		/* A straightforward algorithm would now shift the
 		 * result and extension left until the hidden bit
 		 * becomes one.  Not all of the extension bits need
 		 * participate in the shift.  Only the two most 
diff --git a/arch/parisc/math-emu/sfadd.c b/arch/parisc/math-emu/sfadd.c
index 008d721b5d2..f802cd6c786 100644
--- a/arch/parisc/math-emu/sfadd.c
+++ b/arch/parisc/math-emu/sfadd.c
@@ -298,7 +298,7 @@ sgl_fadd(
 	if(Sgl_iszero_hidden(result))
 	    {
 	    /* Handle normalization */
-	    /* A straight foward algorithm would now shift the result
+	    /* A straightforward algorithm would now shift the result
 	     * and extension left until the hidden bit becomes one.  Not
 	     * all of the extension bits need participate in the shift.
 	     * Only the two most significant bits (round and guard) are
diff --git a/arch/parisc/math-emu/sfsub.c b/arch/parisc/math-emu/sfsub.c
index 24eef61c8e3..5f90d0f31a5 100644
--- a/arch/parisc/math-emu/sfsub.c
+++ b/arch/parisc/math-emu/sfsub.c
@@ -301,7 +301,7 @@ sgl_fsub(
 	if(Sgl_iszero_hidden(result))
 	    {
 	    /* Handle normalization */
-	    /* A straight foward algorithm would now shift the result
+	    /* A straightforward algorithm would now shift the result
 	     * and extension left until the hidden bit becomes one.  Not
 	     * all of the extension bits need participate in the shift.
 	     * Only the two most significant bits (round and guard) are
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index b7ed8d7a9b3..b1d126258de 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -266,8 +266,10 @@ static void __init setup_bootmem(void)
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
-	for (i = 0; i < npmem_ranges; i++)
+	for (i = 0; i < npmem_ranges; i++) {
+		node_set_state(i, N_NORMAL_MEMORY);
 		node_set_online(i);
+	}
 #endif
 
 	/*
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d0e8a1dbf82..a3128ca0fe1 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -138,7 +138,6 @@ config PPC
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_SPARSE_IRQ
 	select IRQ_PER_CPU
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 
@@ -194,6 +193,12 @@ config SYS_SUPPORTS_APM_EMULATION
 	default y if PMAC_APM_EMU
 	bool
 
+config EPAPR_BOOT
+	bool
+	help
+	  Used to allow a board to specify it wants an ePAPR compliant wrapper.
+	default n
+
 config DEFAULT_UIMAGE
 	bool
 	help
@@ -210,7 +215,7 @@ config ARCH_HIBERNATION_POSSIBLE
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
-		   PPC_85xx || PPC_86xx || PPC_PSERIES || 44x || 40x
+		   (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
 
 config PPC_DCR_NATIVE
 	bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 2d38a50e66b..a597dd77b90 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -267,6 +267,11 @@ config PPC_EARLY_DEBUG_USBGECKO
 	  Select this to enable early debugging for Nintendo GameCube/Wii
 	  consoles via an external USB Gecko adapter.
 
+config PPC_EARLY_DEBUG_WSP
+	bool "Early debugging via WSP's internal UART"
+	depends on PPC_WSP
+	select PPC_UDBG_16550
+
 endchoice
 
 config PPC_EARLY_DEBUG_44x_PHYSLOW
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 89178164af5..c26200b40a4 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -69,7 +69,8 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c ugecon.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
-		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
+		cuboot-ebony.c cuboot-hotfoot.c epapr.c treeboot-ebony.c \
+		prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -127,7 +128,7 @@ quiet_cmd_bootas = BOOTAS  $@
       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
 
 quiet_cmd_bootar = BOOTAR  $@
-      cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+      cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
 
 $(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
 	$(call if_changed_dep,bootcc)
@@ -182,6 +183,7 @@ image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
 image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
 image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
 image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
+image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
 
 #
 # Targets which embed a device tree blob
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index f1c4dfc635b..0f7428a37ef 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -6,16 +6,28 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
- * NOTE: this code runs in 32 bit mode and is packaged as ELF32.
+ * NOTE: this code runs in 32 bit mode, is position-independent,
+ * and is packaged as ELF32.
  */
 
 #include "ppc_asm.h"
 
 	.text
-	/* a procedure descriptor used when booting this as a COFF file */
+	/* A procedure descriptor used when booting this as a COFF file.
+	 * When making COFF, this comes first in the link and we're
+	 * linked at 0x500000.
+	 */
 	.globl	_zimage_start_opd
 _zimage_start_opd:
-	.long	_zimage_start, 0, 0, 0
+	.long	0x500000, 0, 0, 0
+
+p_start:	.long	_start
+p_etext:	.long	_etext
+p_bss_start:	.long	__bss_start
+p_end:		.long	_end
+
+	.weak	_platform_stack_top
+p_pstack:	.long	_platform_stack_top
 
 	.weak	_zimage_start
 	.globl	_zimage_start
@@ -24,37 +36,65 @@ _zimage_start:
 _zimage_start_lib:
 	/* Work out the offset between the address we were linked at
 	   and the address where we're running. */
-	bl	1f
-1:	mflr	r0
-	lis	r9,1b@ha
-	addi	r9,r9,1b@l
-	subf.	r0,r9,r0
-	beq	3f		/* if running at same address as linked */
+	bl	.+4
+p_base:	mflr	r10		/* r10 now points to runtime addr of p_base */
+	/* grab the link address of the dynamic section in r11 */
+	addis	r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
+	lwz	r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
+	cmpwi	r11,0
+	beq	3f		/* if not linked -pie */
+	/* get the runtime address of the dynamic section in r12 */
+	.weak	__dynamic_start
+	addis	r12,r10,(__dynamic_start-p_base)@ha
+	addi	r12,r12,(__dynamic_start-p_base)@l
+	subf	r11,r11,r12	/* runtime - linktime offset */
+
+	/* The dynamic section contains a series of tagged entries.
+	 * We need the RELA and RELACOUNT entries. */
+RELA = 7
+RELACOUNT = 0x6ffffff9
+	li	r9,0
+	li	r0,0
+9:	lwz	r8,0(r12)	/* get tag */
+	cmpwi	r8,0
+	beq	10f		/* end of list */
+	cmpwi	r8,RELA
+	bne	11f
+	lwz	r9,4(r12)	/* get RELA pointer in r9 */
+	b	12f
+11:	addis	r8,r8,(-RELACOUNT)@ha
+	cmpwi	r8,RELACOUNT@l
+	bne	12f
+	lwz	r0,4(r12)	/* get RELACOUNT value in r0 */
+12:	addi	r12,r12,8
+	b	9b
 
-	/* The .got2 section contains a list of addresses, so add
-	   the address offset onto each entry. */
-	lis	r9,__got2_start@ha
-	addi	r9,r9,__got2_start@l
-	lis	r8,__got2_end@ha
-	addi	r8,r8,__got2_end@l
-	subf.	r8,r9,r8
+	/* The relocation section contains a list of relocations.
+	 * We now do the R_PPC_RELATIVE ones, which point to words
+	 * which need to be initialized with addend + offset.
+	 * The R_PPC_RELATIVE ones come first and there are RELACOUNT
+	 * of them. */
+10:	/* skip relocation if we don't have both */
+	cmpwi	r0,0
 	beq	3f
-	srwi.	r8,r8,2
-	mtctr	r8
-	add	r9,r0,r9
-2:	lwz	r8,0(r9)
-	add	r8,r8,r0
-	stw	r8,0(r9)
-	addi	r9,r9,4
+	cmpwi	r9,0
+	beq	3f
+
+	add	r9,r9,r11	/* Relocate RELA pointer */
+	mtctr	r0
+2:	lbz	r0,4+3(r9)	/* ELF32_R_INFO(reloc->r_info) */
+	cmpwi	r0,22		/* R_PPC_RELATIVE */
+	bne	3f
+	lwz	r12,0(r9)	/* reloc->r_offset */
+	lwz	r0,8(r9)	/* reloc->r_addend */
+	add	r0,r0,r11
+	stwx	r0,r11,r12
+	addi	r9,r9,12
 	bdnz	2b
 
 	/* Do a cache flush for our text, in case the loader didn't */
-3:	lis	r9,_start@ha
-	addi	r9,r9,_start@l
-	add	r9,r0,r9
-	lis	r8,_etext@ha
-	addi	r8,r8,_etext@l
-	add	r8,r0,r8
+3:	lwz	r9,p_start-p_base(r10)	/* note: these are relocated now */
+	lwz	r8,p_etext-p_base(r10)
 4:	dcbf	r0,r9
 	icbi	r0,r9
 	addi	r9,r9,0x20
@@ -64,27 +104,19 @@ _zimage_start_lib:
 	isync
 
 	/* Clear the BSS */
-	lis	r9,__bss_start@ha
-	addi	r9,r9,__bss_start@l
-	add	r9,r0,r9
-	lis	r8,_end@ha
-	addi	r8,r8,_end@l
-	add	r8,r0,r8
-	li	r10,0
-5:	stw	r10,0(r9)
+	lwz	r9,p_bss_start-p_base(r10)
+	lwz	r8,p_end-p_base(r10)
+	li	r0,0
+5:	stw	r0,0(r9)
 	addi	r9,r9,4
 	cmplw	cr0,r9,r8
 	blt	5b
 
 	/* Possibly set up a custom stack */
-.weak	_platform_stack_top
-	lis	r8,_platform_stack_top@ha
-	addi	r8,r8,_platform_stack_top@l
+	lwz	r8,p_pstack-p_base(r10)
 	cmpwi	r8,0
 	beq	6f
-	add	r8,r0,r8
 	lwz	r1,0(r8)
-	add	r1,r0,r1
 	li	r0,0
 	stwu	r0,-16(r1)	/* establish a stack frame */
 6:
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index 22f64b62d7f..d6a8ae45813 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -1,7 +1,7 @@
 /*
  * P1020 RDB Device Tree Source
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,12 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p1020si.dtsi"
+
 / {
-	model = "fsl,P1020";
+	model = "fsl,P1020RDB";
 	compatible = "fsl,P1020RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		serial0 = &serial0;
@@ -26,34 +25,11 @@
 		pci1 = &pci1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
 	};
 
 	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -165,88 +141,14 @@
 	};
 
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p1020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p1020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p1020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
 
 			fsl_m25p80@0 {
 				#address-cells = <1>;
@@ -294,66 +196,7 @@
 			};
 		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p1020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2,256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
 		mdio@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x24000 0x1000 0xb0030 0x4>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
@@ -369,10 +212,6 @@
 		};
 
 		mdio@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-tbi";
-			reg = <0x25000 0x1000 0xb1030 0x4>;
 
 			tbi0: tbi-phy@11 {
 				reg = <0x11>;
@@ -381,97 +220,25 @@
 		};
 
 		enet0: ethernet@b0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb0000 0x1000>;
-				interrupts = <29 2 30 2 34 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb4000 0x1000>;
-				interrupts = <17 2 18 2 24 2>;
-			};
 		};
 
 		enet1: ethernet@b1000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 			tbi-handle = <&tbi0>;
 			phy-connection-type = "sgmii";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb1000 0x1000>;
-				interrupts = <35 2 36 2 40 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb5000 0x1000>;
-				interrupts = <51 2 52 2 67 2>;
-			};
 		};
 
 		enet2: ethernet@b2000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb2000 0x1000>;
-				interrupts = <31 2 32 2 33 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb6000 0x1000>;
-				interrupts = <25 2 26 2 27 2>;
-			};
 		};
 
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
 			phy_type = "ulpi";
 		};
 
@@ -481,82 +248,23 @@
 		   it enables USB2. OTOH, U-Boot does create a new node
 		   when there isn't any. So, just comment it out.
 		usb@23000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <46 0x2>;
 			phy_type = "ulpi";
 		};
 		*/
 
-		sdhci@2e000 {
-			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p1020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
 	};
 
 	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
@@ -573,25 +281,23 @@
 	};
 
 	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
new file mode 100644
index 00000000000..f0bf7f42f09
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
@@ -0,0 +1,213 @@
+/*
+ * P1020 RDB  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si.dtsi"
+
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		PowerPC,P1020@1 {
+		status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@b0000 {
+			status = "disabled";
+		};
+
+		enet1: ethernet@b1000 {
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+
+		/* USB2 is shared with localbus, so it must be disabled
+		   by default. We can't put 'status = "disabled";' here
+		   since U-Boot doesn't clear the status property when
+		   it enables USB2. OTOH, U-Boot does create a new node
+		   when there isn't any. So, just comment it out.
+		usb@23000 {
+			phy_type = "ulpi";
+		};
+		*/
+
+		mpic: pic@40000 {
+			protected-sources = <
+			42 29 30 34	/* serial1, enet0-queue-group0 */
+			17 18 24 45	/* enet0-queue-group1, crypto */
+			>;
+		};
+
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
new file mode 100644
index 00000000000..6ec02204a44
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
@@ -0,0 +1,148 @@
+/*
+ * P1020 RDB Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si.dtsi"
+
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial1;
+		};
+
+	cpus {
+		PowerPC,P1020@0 {
+		status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
+		};
+
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
+		dma@21300 {
+			status = "disabled";
+		};
+
+		mdio@24000 {
+			status = "disabled";
+		};
+
+		mdio@25000 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@b0000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+		};
+
+		enet1: ethernet@b1000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@b2000 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			16 		/* ecm, mem, L2, pci0, pci1 */
+			43 42 59	/* i2c, serial0, spi */
+			47 63 62 	/* gpio, tdm */
+			20 21 22 23	/* dma */
+			03 02 		/* mdio */
+			35 36 40	/* enet1-queue-group0 */
+			51 52 67	/* enet1-queue-group1 */
+			31 32 33	/* enet2-queue-group0 */
+			25 26 27	/* enet2-queue-group1 */
+			28 72 58 	/* usb, sdhci, crypto */
+			0xb0 0xb1 0xb2	/* message */
+			0xb3 0xb4 0xb5
+			0xb6 0xb7
+			0xe0 0xe1 0xe2	/* msi */
+			0xe3 0xe4 0xe5
+			0xe6 0xe7		/* sdhci, crypto , pci */
+			>;
+		};
+
+		msi@41600 {
+			status = "disabled";
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+
+	};
+
+	pci0: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe0a000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
new file mode 100644
index 00000000000..5c5acb66c3f
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -0,0 +1,377 @@
+/*
+ * P1020si Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+
+		};
+
+		enet0: ethernet@b0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@b1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@b2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+		};
+
+		/* USB2 is shared with localbus, so it must be disabled
+		   by default. We can't put 'status = "disabled";' here
+		   since U-Boot doesn't clear the status property when
+		   it enables USB2. OTOH, U-Boot does create a new node
+		   when there isn't any. So, just comment it out.
+		usb@23000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+		*/
+
+		sdhci@2e000 {
+			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1020-guts","fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 59ef405c1c9..4f685a779f4 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -52,7 +52,7 @@
 		#size-cells = <1>;
 		compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
 		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
+		interrupts = <19 2 0 0>;
 
 		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
 			  0x1 0x0 0xf 0xe0000000 0x08000000
@@ -157,7 +157,7 @@
 			 * IRQ8 is generated if the "EVENT" switch is pressed
 			 * and PX_CTL[EVESEL] is set to 00.
 			 */
-			interrupts = <8 8>;
+			interrupts = <8 8 0 0>;
 		};
 	};
 
@@ -178,13 +178,13 @@
 		ecm@1000 {
 			compatible = "fsl,p1022-ecm", "fsl,ecm";
 			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		memory-controller@2000 {
 			compatible = "fsl,p1022-memory-controller";
 			reg = <0x2000 0x1000>;
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		i2c@3000 {
@@ -193,7 +193,7 @@
 			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
+			interrupts = <43 2 0 0>;
 			dfsrr;
 		};
 
@@ -203,7 +203,7 @@
 			cell-index = <1>;
 			compatible = "fsl-i2c";
 			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
+			interrupts = <43 2 0 0>;
 			dfsrr;
 
 			wm8776:codec@1a {
@@ -220,7 +220,7 @@
 			compatible = "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <42 2>;
+			interrupts = <42 2 0 0>;
 		};
 
 		serial1: serial@4600 {
@@ -229,7 +229,7 @@
 			compatible = "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <42 2>;
+			interrupts = <42 2 0 0>;
 		};
 
 		spi@7000 {
@@ -238,7 +238,7 @@
 			#size-cells = <0>;
 			compatible = "fsl,espi";
 			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
+			interrupts = <59 0x2 0 0>;
 			espi,num-ss-bits = <4>;
 			mode = "cpu";
 
@@ -275,7 +275,7 @@
 			compatible = "fsl,mpc8610-ssi";
 			cell-index = <0>;
 			reg = <0x15000 0x100>;
-			interrupts = <75 2>;
+			interrupts = <75 2 0 0>;
 			fsl,mode = "i2s-slave";
 			codec-handle = <&wm8776>;
 			fsl,playback-dma = <&dma00>;
@@ -294,25 +294,25 @@
 				compatible = "fsl,ssi-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
-				interrupts = <76 2>;
+				interrupts = <76 2 0 0>;
 			};
 			dma01: dma-channel@80 {
 				compatible = "fsl,ssi-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
-				interrupts = <77 2>;
+				interrupts = <77 2 0 0>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
-				interrupts = <78 2>;
+				interrupts = <78 2 0 0>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
-				interrupts = <79 2>;
+				interrupts = <79 2 0 0>;
 			};
 		};
 
@@ -320,7 +320,7 @@
 			#gpio-cells = <2>;
 			compatible = "fsl,mpc8572-gpio";
 			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
+			interrupts = <47 0x2 0 0>;
 			gpio-controller;
 		};
 
@@ -329,7 +329,7 @@
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>; // L2, 256K
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		dma@21300 {
@@ -343,25 +343,25 @@
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
-				interrupts = <20 2>;
+				interrupts = <20 2 0 0>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
-				interrupts = <21 2>;
+				interrupts = <21 2 0 0>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
-				interrupts = <22 2>;
+				interrupts = <22 2 0 0>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
-				interrupts = <23 2>;
+				interrupts = <23 2 0 0>;
 			};
 		};
 
@@ -370,7 +370,7 @@
 			#size-cells = <0>;
 			compatible = "fsl-usb2-dr";
 			reg = <0x22000 0x1000>;
-			interrupts = <28 0x2>;
+			interrupts = <28 0x2 0 0>;
 			phy_type = "ulpi";
 		};
 
@@ -381,11 +381,11 @@
 			reg = <0x24000 0x1000 0xb0030 0x4>;
 
 			phy0: ethernet-phy@0 {
-				interrupts = <3 1>;
+				interrupts = <3 1 0 0>;
 				reg = <0x1>;
 			};
 			phy1: ethernet-phy@1 {
-				interrupts = <9 1>;
+				interrupts = <9 1 0 0>;
 				reg = <0x2>;
 			};
 		};
@@ -416,13 +416,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB0000 0x1000>;
-				interrupts = <29 2 30 2 34 2>;
+				interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
 			};
 			queue-group@1{
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB4000 0x1000>;
-				interrupts = <17 2 18 2 24 2>;
+				interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
 			};
 		};
 
@@ -443,20 +443,20 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB1000 0x1000>;
-				interrupts = <35 2 36 2 40 2>;
+				interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
 			};
 			queue-group@1{
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB5000 0x1000>;
-				interrupts = <51 2 52 2 67 2>;
+				interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
 			};
 		};
 
 		sdhci@2e000 {
 			compatible = "fsl,p1022-esdhc", "fsl,esdhc";
 			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
+			interrupts = <72 0x2 0 0>;
 			fsl,sdhci-auto-cmd12;
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
@@ -467,7 +467,7 @@
 				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
 				     "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
+			interrupts = <45 2 0 0 58 2 0 0>;
 			fsl,num-channels = <4>;
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x97c>;
@@ -478,14 +478,14 @@
 			compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
 			reg = <0x18000 0x1000>;
 			cell-index = <1>;
-			interrupts = <74 0x2>;
+			interrupts = <74 0x2 0 0>;
 		};
 
 		sata@19000 {
 			compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
 			reg = <0x19000 0x1000>;
 			cell-index = <2>;
-			interrupts = <41 0x2>;
+			interrupts = <41 0x2 0 0>;
 		};
 
 		power@e0070{
@@ -496,21 +496,33 @@
 		display@10000 {
 			compatible = "fsl,diu", "fsl,p1022-diu";
 			reg = <0x10000 1000>;
-			interrupts = <64 2>;
+			interrupts = <64 2 0 0>;
 		};
 
 		timer@41100 {
 			compatible = "fsl,mpic-global-timer";
-			reg = <0x41100 0x204>;
-			interrupts = <0xf7 0x2>;
+			reg = <0x41100 0x100 0x41300 4>;
+			interrupts = <0 0 3 0
+			              1 0 3 0
+			              2 0 3 0
+			              3 0 3 0>;
+		};
+
+		timer@42100 {
+			compatible = "fsl,mpic-global-timer";
+			reg = <0x42100 0x100 0x42300 4>;
+			interrupts = <4 0 3 0
+			              5 0 3 0
+			              6 0 3 0
+			              7 0 3 0>;
 		};
 
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <4>;
 			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
+			compatible = "fsl,mpic";
 			device_type = "open-pic";
 		};
 
@@ -519,14 +531,14 @@
 			reg = <0x41600 0x80>;
 			msi-available-ranges = <0 0x100>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
@@ -547,7 +559,7 @@
 		ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -582,7 +594,7 @@
 		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -618,7 +630,7 @@
 		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index 11019142813..2bcf3683d22 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -1,7 +1,7 @@
 /*
  * P2020 DS Device Tree Source
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,12 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020DS";
 	compatible = "fsl,P2020DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -27,35 +26,13 @@
 		pci2 = &pci2;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
 
 	memory {
 		device_type = "memory";
 	};
 
 	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
 		compatible = "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
 		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
 			  0x1 0x0 0x0 0xe0000000 0x08000000
 			  0x2 0x0 0x0 0xffa00000 0x00040000
@@ -158,352 +135,77 @@
 	};
 
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0 0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p2020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p2020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		spi@7000 {
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
+		usb@22000 {
+			phy_type = "ulpi";
 		};
 
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
+				interrupts = <3 1>;
+				reg = <0x0>;
 			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
+			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
+				interrupts = <3 1>;
+				reg = <0x1>;
 			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
+			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
+				interrupts = <3 1>;
+				reg = <0x2>;
 			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
-		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
 		};
 
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2, 512k
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
 
-		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			phy_type = "ulpi";
 		};
 
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		sdhci@2e000 {
-			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
 
 		msi@41600 {
 			compatible = "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
 		};
 	};
 
 	pci0: pcie@ffe08000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe08000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -528,18 +230,8 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
 		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -667,18 +359,8 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index da4cb0d8d21..3782a58f13b 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -1,7 +1,7 @@
 /*
  * P2020 RDB Device Tree Source
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,12 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -26,34 +25,11 @@
 		pci1 = &pci1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
 	};
 
 	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		/* NOR and NAND Flashes */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -165,90 +141,16 @@
 	};
 
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p2020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p2020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
+	spi@7000 {
 
-		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
-
-			fsl_m25p80@0 {
+		fsl_m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,espi-flash";
@@ -294,254 +196,68 @@
 			};
 		};
 
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2,512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
+		usb@22000 {
+			phy_type = "ulpi";
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+				};
+			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
+				interrupts = <3 1>;
+				reg = <0x1>;
+				};
+		};
+
+		mdio@25520 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
-		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
-			phy_type = "ulpi";
+		mdio@26520 {
+			status = "disabled";
 		};
 
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <3 1>;
-					reg = <0x1>;
-				};
-			};
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
 
-		sdhci@2e000 {
-			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
+	};
 
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
+	pci0: pcie@ffe08000 {
+		status = "disabled";
 	};
 
-	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
+	pci1: pcie@ffe09000 {
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		pcie@0 {
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+			pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -556,26 +272,24 @@
 		};
 	};
 
-	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+	pci2: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index 0fe93d0c8b2..fc8ddddfccb 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -6,7 +6,7 @@
  * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
  * eth1, eth2, sdhc, crypto, global-util, pci0.
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -14,12 +14,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet1 = &enet1;
@@ -29,91 +28,33 @@
 	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
+		PowerPC,P2020@1 {
+		status = "disabled";
 		};
+
 	};
 
 	memory {
 		device_type = "memory";
 	};
 
-	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p2020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p2020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
+	localbus@ffe05000 {
+		status = "disabled";
+	};
 
+	soc@ffe00000 {
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
+		serial1: serial@4600 {
+			status = "disabled";
 		};
 
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
 
 			fsl_m25p80@0 {
 				#address-cells = <1>;
@@ -161,76 +102,15 @@
 			};
 		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2,512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
+		dma@c300 {
+			status = "disabled";
 		};
 
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
 			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
@@ -245,29 +125,21 @@
 		};
 
 		mdio@25520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-tbi";
-			reg = <0x26520 0x20>;
-
 			tbi0: tbi-phy@11 {
 				reg = <0x11>;
 				device_type = "tbi-phy";
 			};
 		};
 
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@24000 {
+			status = "disabled";
+		};
+
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "sgmii";
@@ -275,49 +147,12 @@
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
 
-		sdhci@2e000 {
-			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
 
 		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
 			protected-sources = <
 			42 76 77 78 79 /* serial1 , dma2 */
 			29 30 34 26 /* enet0, pci1 */
@@ -326,26 +161,28 @@
 			>;
 		};
 
-		global-utilities@e0000 {
-			compatible = "fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
+		msi@41600 {
+			status = "disabled";
 		};
+
+
 	};
 
-	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
+	pci0: pcie@ffe08000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
@@ -360,4 +197,8 @@
 				  0x0 0x100000>;
 		};
 	};
+
+	pci2: pcie@ffe0a000 {
+		status = "disabled";
+	};
 };
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index e95a5128532..261c34ba45e 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -7,7 +7,7 @@
  *
  * Please note to add "-b 1" for core1's dts compiling.
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -15,27 +15,21 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
-		serial0 = &serial0;
+		serial0 = &serial1;
 		pci1 = &pci1;
 	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
+		PowerPC,P2020@0 {
+		status = "disabled";
 		};
 	};
 
@@ -43,20 +37,37 @@
 		device_type = "memory";
 	};
 
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		serial0: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
 		};
 
 		dma@c300 {
@@ -96,6 +107,10 @@
 			};
 		};
 
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
 		L2: l2-cache-controller@20000 {
 			compatible = "fsl,p2020-l2-cache-controller";
 			reg = <0x20000 0x1000>;
@@ -104,31 +119,49 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		dma@21300 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		mdio@24520 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
 
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
 
 		};
 
+		enet1: ethernet@25000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@26000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		crypto@30000 {
+			status = "disabled";
+		};
+
 		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
 			protected-sources = <
 			17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
 			16 20 21 22 23 28 	/* L2, dma1, USB */
@@ -152,28 +185,39 @@
 				0xe7 0>;
 			interrupt-parent = <&mpic>;
 		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+
 	};
 
-	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+	pci0: pcie@ffe08000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
new file mode 100644
index 00000000000..6def17f265d
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020si.dtsi
@@ -0,0 +1,382 @@
+/*
+ * P2020 Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P2020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x520 0x20>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe08000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+	};
+
+	pci1: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+	};
+
+	pci2: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+	};
+};
diff --git a/arch/powerpc/boot/epapr.c b/arch/powerpc/boot/epapr.c
new file mode 100644
index 00000000000..06c1961bd12
--- /dev/null
+++ b/arch/powerpc/boot/epapr.c
@@ -0,0 +1,66 @@
+/*
+ * Bootwrapper for ePAPR compliant firmwares
+ *
+ * Copyright 2010 David Gibson <david@gibson.dropbear.id.au>, IBM Corporation.
+ *
+ * Based on earlier bootwrappers by:
+ * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\
+ *   and
+ * Scott Wood <scottwood@freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "io.h"
+#include <libfdt.h>
+
+BSS_STACK(4096);
+
+#define EPAPR_SMAGIC	0x65504150
+#define EPAPR_EMAGIC	0x45504150
+
+static unsigned epapr_magic;
+static unsigned long ima_size;
+static unsigned long fdt_addr;
+
+static void platform_fixups(void)
+{
+	if ((epapr_magic != EPAPR_EMAGIC)
+	    && (epapr_magic != EPAPR_SMAGIC))
+		fatal("r6 contained 0x%08x instead of ePAPR magic number\n",
+		      epapr_magic);
+
+	if (ima_size < (unsigned long)_end)
+		printf("WARNING: Image loaded outside IMA!"
+		       " (_end=%p, ima_size=0x%lx)\n", _end, ima_size);
+	if (ima_size < fdt_addr)
+		printf("WARNING: Device tree address is outside IMA!"
+		       "(fdt_addr=0x%lx, ima_size=0x%lx)\n", fdt_addr,
+		       ima_size);
+	if (ima_size < fdt_addr + fdt_totalsize((void *)fdt_addr))
+		printf("WARNING: Device tree extends outside IMA!"
+		       " (fdt_addr=0x%lx, size=0x%x, ima_size=0x%lx\n",
+		       fdt_addr, fdt_totalsize((void *)fdt_addr), ima_size);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	epapr_magic = r6;
+	ima_size = r7;
+	fdt_addr = r3;
+
+	/* FIXME: we should process reserve entries */
+
+	simple_alloc_init(_end, ima_size - (unsigned long)_end, 32, 64);
+
+	fdt_init((void *)fdt_addr);
+
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index cb97e7511d7..c74531af72c 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -39,6 +39,7 @@ dts=
 cacheit=
 binary=
 gzip=.gz
+pie=
 
 # cross-compilation prefix
 CROSS=
@@ -157,9 +158,10 @@ pmac|chrp)
     platformo=$object/of.o
     ;;
 coff)
-    platformo=$object/of.o
+    platformo="$object/crt0.o $object/of.o"
     lds=$object/zImage.coff.lds
     link_address='0x500000'
+    pie=
     ;;
 miboot|uboot)
     # miboot and U-boot want just the bare bits, not an ELF binary
@@ -208,6 +210,7 @@ ps3)
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     link_address=''
+    pie=
     ;;
 ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
@@ -244,6 +247,10 @@ gamecube|wii)
 treeboot-iss4xx-mpic)
     platformo="$object/treeboot-iss4xx.o"
     ;;
+epapr)
+    link_address='0x20000000'
+    pie=-pie
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -251,7 +258,7 @@ if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
     ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
 
     if [ -n "$gzip" ]; then
-        gzip -f -9 "$vmz.$$"
+        gzip -n -f -9 "$vmz.$$"
     fi
 
     if [ -n "$cacheit" ]; then
@@ -310,9 +317,9 @@ fi
 
 if [ "$platform" != "miboot" ]; then
     if [ -n "$link_address" ] ; then
-        text_start="-Ttext $link_address --defsym _start=$link_address"
+        text_start="-Ttext $link_address"
     fi
-    ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
+    ${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
@@ -336,7 +343,7 @@ coff)
     $objbin/hack-coff "$ofile"
     ;;
 cuboot*)
-    gzip -f -9 "$ofile"
+    gzip -n -f -9 "$ofile"
     ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
             $uboot_version -d "$ofile".gz "$ofile"
     ;;
@@ -383,6 +390,6 @@ ps3)
 
     odir="$(dirname "$ofile.bin")"
     rm -f "$odir/otheros.bld"
-    gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
+    gzip -n --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
     ;;
 esac
diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S
index 856dc78b14e..de4c9e3c934 100644
--- a/arch/powerpc/boot/zImage.coff.lds.S
+++ b/arch/powerpc/boot/zImage.coff.lds.S
@@ -3,13 +3,13 @@ ENTRY(_zimage_start_opd)
 EXTERN(_zimage_start_opd)
 SECTIONS
 {
-  _start = .;
   .text      :
   {
+    _start = .;
     *(.text)
     *(.fixup)
+    _etext = .;
   }
-  _etext = .;
   . = ALIGN(4096);
   .data    :
   {
@@ -17,9 +17,7 @@ SECTIONS
     *(.data*)
     *(__builtin_*)
     *(.sdata*)
-    __got2_start = .;
     *(.got2)
-    __got2_end = .;
 
     _dtb_start = .;
     *(.kernel:dtb)
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index 0962d62bdb5..2bd8731f136 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -3,49 +3,64 @@ ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
 {
-  _start = .;
   .text      :
   {
+    _start = .;
     *(.text)
     *(.fixup)
+    _etext = .;
   }
-  _etext = .;
   . = ALIGN(4096);
   .data    :
   {
     *(.rodata*)
     *(.data*)
     *(.sdata*)
-    __got2_start = .;
     *(.got2)
-    __got2_end = .;
   }
+  .dynsym : { *(.dynsym) }
+  .dynstr : { *(.dynstr) }
+  .dynamic :
+  {
+    __dynamic_start = .;
+    *(.dynamic)
+  }
+  .hash : { *(.hash) }
+  .interp : { *(.interp) }
+  .rela.dyn : { *(.rela*) }
 
   . = ALIGN(8);
-  _dtb_start = .;
-  .kernel:dtb : { *(.kernel:dtb) }
-  _dtb_end = .;
-
-  . = ALIGN(4096);
-  _vmlinux_start =  .;
-  .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) }
-  _vmlinux_end =  .;
+  .kernel:dtb :
+  {
+    _dtb_start = .;
+    *(.kernel:dtb)
+    _dtb_end = .;
+  }
 
   . = ALIGN(4096);
-  _initrd_start =  .;
-  .kernel:initrd : { *(.kernel:initrd) }
-  _initrd_end =  .;
+  .kernel:vmlinux.strip :
+  {
+    _vmlinux_start =  .;
+    *(.kernel:vmlinux.strip)
+    _vmlinux_end =  .;
+  }
 
   . = ALIGN(4096);
-  _edata  =  .;
+  .kernel:initrd :
+  {
+    _initrd_start =  .;
+    *(.kernel:initrd)
+    _initrd_end =  .;
+  }
 
   . = ALIGN(4096);
-  __bss_start = .;
   .bss       :
   {
-   *(.sbss)
-   *(.bss)
+    _edata  =  .;
+    __bss_start = .;
+    *(.sbss)
+    *(.bss)
+    *(COMMON)
+    _end = . ;
   }
-  . = ALIGN(4096);
-  _end = . ;
 }
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 6cf9d661480..abf74dc1f79 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -47,6 +47,7 @@ CONFIG_MTD_NAND_NDFC=y
 CONFIG_MTD_UBI=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 6828eda02bd..0c7de9620ea 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -43,6 +43,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_SCSI_TGT=y
 CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index c683bce4c26..126ef1b08a0 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -104,7 +104,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index a721cd3d793..abcf00ad939 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -101,7 +101,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 55e0725500d..11662c217ac 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -58,7 +58,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index d724095530a..ebe9b30b072 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -59,7 +59,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 4b44beaa21a..eb25229b387 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -63,7 +63,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 4b2441244ea..d41857a5152 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -85,6 +85,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_DS1682=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECS=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a360ba44b92..38303ec11bc 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -85,6 +85,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_DS1682=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECS=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index be2829dd129..98533973d20 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -138,6 +138,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_DS1682=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 0c9c7ed7ec7..f51c7ebc181 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -63,6 +63,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -167,7 +168,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index f9e6a3ea5a6..2a84fd7f631 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -132,8 +132,8 @@ CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_IND=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig
index 06f95492afc..d32283555b5 100644
--- a/arch/powerpc/configs/e55xx_smp_defconfig
+++ b/arch/powerpc/configs/e55xx_smp_defconfig
@@ -6,10 +6,10 @@ CONFIG_NR_CPUS=2
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
@@ -25,14 +25,42 @@ CONFIG_P5020_DS=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
-CONFIG_SPARSE_IRQ=y
 # CONFIG_PCI is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_INET_ESP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_NET_ETHERNET=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -63,22 +91,14 @@ CONFIG_NLS=y
 CONFIG_NLS_UTF8=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
-CONFIG_LIBCRC32C=m
 CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index f39d0cf876d..8a874b99986 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -78,6 +78,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index 62db8a3df16..c02bbb2fddf 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -61,6 +61,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_XIP=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7376e27b8ed..e63f537b854 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -52,6 +52,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI_TGT=y
 CONFIG_BLK_DEV_SD=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 99a19d1e9bf..96b89df7752 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -82,6 +82,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -203,7 +204,6 @@ CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index c636f23f8c9..de65841aa04 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -84,6 +84,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -205,7 +206,6 @@ CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 55b54318fef..a1cc8179e9f 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -66,6 +66,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -170,7 +171,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index edd2d54c819..f4deb0b78cf 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -59,6 +59,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ac4fc41035f..f8b394a76ac 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -112,8 +112,8 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
 CONFIG_IRTTY_SIR=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 9d64a6822d8..214208924a9 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -351,8 +351,8 @@ CONFIG_VLSI_FIR=m
 CONFIG_VIA_FIR=m
 CONFIG_MCS_FIR=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -398,6 +398,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_VIRTIO_BLK=m
 CONFIG_BLK_DEV_HD=y
+CONFIG_MISC_DEVICES=y
 CONFIG_ENCLOSURE_SERVICES=m
 CONFIG_SENSORS_TSL2550=m
 CONFIG_EEPROM_AT24=m
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index caba919f65d..6472322bf13 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -52,8 +52,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 9c3f22c6cde..7de13865508 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -146,12 +146,18 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_LPFC=m
 CONFIG_ATA=y
 # CONFIG_ATA_SFF is not set
@@ -189,6 +195,7 @@ CONFIG_TIGON3=y
 CONFIG_BNX2=m
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
 CONFIG_EHEA=y
 CONFIG_IXGBE=m
 CONFIG_IXGB=m
@@ -196,6 +203,8 @@ CONFIG_S2IO=m
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_MLX4_EN=m
+CONFIG_QLGE=m
+CONFIG_BE2NET=m
 CONFIG_PPP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
@@ -255,6 +264,8 @@ CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_EHCA=m
+CONFIG_INFINIBAND_CXGB3=m
+CONFIG_INFINIBAND_CXGB4=m
 CONFIG_MLX4_INFINIBAND=m
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_CM=y
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 6b6dc20b0be..bdf0563ba42 100644
--- a/arch/powerpc/include/asm/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -393,8 +393,8 @@ typedef struct fec {
 	uint	fec_addr_low;		/* lower 32 bits of station address	*/
 	ushort	fec_addr_high;		/* upper 16 bits of station address	*/
 	ushort	res1;			/* reserved				*/
-	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
-	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
+	uint	fec_grp_hash_table_high;	/* upper 32-bits of hash table		*/
+	uint	fec_grp_hash_table_low;	/* lower 32-bits of hash table		*/
 	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
 	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
 	uint	fec_r_buff_size;	/* Rx buffer size			*/
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index 2e561876fc8..f18c6d9b951 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -209,8 +209,8 @@ static __inline__ unsigned long ffz(unsigned long x)
 		return BITS_PER_LONG;
 
 	/*
-	 * Calculate the bit position of the least signficant '1' bit in x
-	 * (since x has been changed this will actually be the least signficant
+	 * Calculate the bit position of the least significant '1' bit in x
+	 * (since x has been changed this will actually be the least significant
 	 * '0' bit in * the original x).  Note: (x & -x) gives us a mask that
 	 * is the least significant * (RIGHT-most) 1-bit of the value in x.
 	 */
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index 2296112e247..91010e8f847 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -140,7 +140,7 @@ static inline void __user *arch_compat_alloc_user_space(long len)
 	unsigned long usp = regs->gpr[1];
 
 	/*
-	 * We cant access below the stack pointer in the 32bit ABI and
+	 * We can't access below the stack pointer in the 32bit ABI and
 	 * can access 288 bytes in the 64bit ABI
 	 */
 	if (!is_32bit_task())
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index e50323fe941..4398a6cdcf5 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -98,7 +98,7 @@ typedef struct cpm_buf_desc {
 #define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
 #define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
 #define BD_SC_TC	(0x0400)	/* Transmit CRC */
-#define BD_SC_CM	(0x0200)	/* Continous mode */
+#define BD_SC_CM	(0x0200)	/* Continuous mode */
 #define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
 #define BD_SC_P		(0x0100)	/* xmt preamble */
 #define BD_SC_BR	(0x0020)	/* Break received */
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index bd07650dca5..8ee4211ca0c 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -4,7 +4,7 @@
  *
  * This file contains structures and information for the communication
  * processor channels.  Some CPM control and status is available
- * throught the MPC8xx internal memory map.  See immap.h for details.
+ * through the MPC8xx internal memory map.  See immap.h for details.
  * This file only contains what I need for the moment, not the total
  * CPM capabilities.  I (or someone else) will add definitions as they
  * are needed.  -- Dan
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index be3cdf9134c..c0d842cfd01 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -157,6 +157,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_476_DD2			ASM_CONST(0x0000000000010000)
 #define CPU_FTR_NEED_COHERENT		ASM_CONST(0x0000000000020000)
 #define CPU_FTR_NO_BTIC			ASM_CONST(0x0000000000040000)
+#define CPU_FTR_DEBUG_LVL_EXC		ASM_CONST(0x0000000000080000)
 #define CPU_FTR_NODSISRALIGN		ASM_CONST(0x0000000000100000)
 #define CPU_FTR_PPC_LE			ASM_CONST(0x0000000000200000)
 #define CPU_FTR_REAL_LE			ASM_CONST(0x0000000000400000)
@@ -178,22 +179,18 @@ extern const char *powerpc_base_platform;
 #define LONG_ASM_CONST(x)		0
 #endif
 
-#define CPU_FTR_SLB			LONG_ASM_CONST(0x0000000100000000)
-#define CPU_FTR_16M_PAGE		LONG_ASM_CONST(0x0000000200000000)
-#define CPU_FTR_TLBIEL			LONG_ASM_CONST(0x0000000400000000)
+
+#define CPU_FTR_HVMODE_206		LONG_ASM_CONST(0x0000000800000000)
+#define CPU_FTR_CFAR			LONG_ASM_CONST(0x0000001000000000)
 #define CPU_FTR_IABR			LONG_ASM_CONST(0x0000002000000000)
 #define CPU_FTR_MMCRA			LONG_ASM_CONST(0x0000004000000000)
 #define CPU_FTR_CTRL			LONG_ASM_CONST(0x0000008000000000)
 #define CPU_FTR_SMT			LONG_ASM_CONST(0x0000010000000000)
-#define CPU_FTR_LOCKLESS_TLBIE		LONG_ASM_CONST(0x0000040000000000)
-#define CPU_FTR_CI_LARGE_PAGE		LONG_ASM_CONST(0x0000100000000000)
 #define CPU_FTR_PAUSE_ZERO		LONG_ASM_CONST(0x0000200000000000)
 #define CPU_FTR_PURR			LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_CELL_TB_BUG		LONG_ASM_CONST(0x0000800000000000)
 #define CPU_FTR_SPURR			LONG_ASM_CONST(0x0001000000000000)
 #define CPU_FTR_DSCR			LONG_ASM_CONST(0x0002000000000000)
-#define CPU_FTR_1T_SEGMENT		LONG_ASM_CONST(0x0004000000000000)
-#define CPU_FTR_NO_SLBIE_B		LONG_ASM_CONST(0x0008000000000000)
 #define CPU_FTR_VSX			LONG_ASM_CONST(0x0010000000000000)
 #define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
 #define CPU_FTR_CP_USE_DCBTZ		LONG_ASM_CONST(0x0040000000000000)
@@ -202,12 +199,14 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_STCX_CHECKS_ADDRESS	LONG_ASM_CONST(0x0200000000000000)
 #define CPU_FTR_POPCNTB			LONG_ASM_CONST(0x0400000000000000)
 #define CPU_FTR_POPCNTD			LONG_ASM_CONST(0x0800000000000000)
+#define CPU_FTR_ICSWX			LONG_ASM_CONST(0x1000000000000000)
 
 #ifndef __ASSEMBLY__
 
-#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_SLB | \
-				 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
-				 CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
+#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+
+#define MMU_FTR_PPCAS_ARCH_V2 	(MMU_FTR_SLB | MMU_FTR_TLBIEL | \
+				 MMU_FTR_16M_PAGE)
 
 /* We only set the altivec features if the kernel was compiled with altivec
  * support
@@ -382,10 +381,13 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_E500_2	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
 	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | \
 	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
-#define CPU_FTRS_E500MC	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \
+#define CPU_FTRS_E500MC	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL)
+#define CPU_FTRS_E5500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
+	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
+	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_DEBUG_LVL_EXC)
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
@@ -405,41 +407,46 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_POWER5	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-	    CPU_FTR_PURR | CPU_FTR_STCX_CHECKS_ADDRESS | \
-	    CPU_FTR_POPCNTB)
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
 #define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_COHERENT_ICACHE | \
 	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
 	    CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \
-	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR)
 #define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_HVMODE_206 |\
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_COHERENT_ICACHE | \
 	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
 	    CPU_FTR_DSCR | CPU_FTR_SAO  | CPU_FTR_ASYM_SMT | \
-	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD)
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_ICSWX | CPU_FTR_CFAR)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | \
-	    CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
+	    CPU_FTR_PAUSE_ZERO  | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
 	    CPU_FTR_UNALIGNED_LD_STD)
 #define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_PPCAS_ARCH_V2 | \
-	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
-	    CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_PURR | CPU_FTR_REAL_LE)
 #define CPU_FTRS_COMPATIBLE	(CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
 
+#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
+		     CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+
 #ifdef __powerpc64__
+#ifdef CONFIG_PPC_BOOK3E
+#define CPU_FTRS_POSSIBLE	(CPU_FTRS_E5500 | CPU_FTRS_A2)
+#else
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
 	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
 	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
-	    CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
+	    CPU_FTR_VSX)
+#endif
 #else
 enum {
 	CPU_FTRS_POSSIBLE =
@@ -473,16 +480,21 @@ enum {
 #endif
 #ifdef CONFIG_E500
 	    CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
+	    CPU_FTRS_E5500 |
 #endif
 	    0,
 };
 #endif /* __powerpc64__ */
 
 #ifdef __powerpc64__
+#ifdef CONFIG_PPC_BOOK3E
+#define CPU_FTRS_ALWAYS		(CPU_FTRS_E5500 & CPU_FTRS_A2)
+#else
 #define CPU_FTRS_ALWAYS		\
 	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\
 	    CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 &	\
 	    CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
+#endif
 #else
 enum {
 	CPU_FTRS_ALWAYS =
@@ -513,6 +525,7 @@ enum {
 #endif
 #ifdef CONFIG_E500
 	    CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
+	    CPU_FTRS_E5500 &
 #endif
 	    CPU_FTRS_POSSIBLE,
 };
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index f71bb4c118b..ce516e5eb0d 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -37,16 +37,16 @@ extern cpumask_t threads_core_mask;
  * This can typically be used for things like IPI for tlb invalidations
  * since those need to be done only once per core/TLB
  */
-static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+static inline cpumask_t cpu_thread_mask_to_cores(const struct cpumask *threads)
 {
 	cpumask_t	tmp, res;
 	int		i;
 
-	res = CPU_MASK_NONE;
+	cpumask_clear(&res);
 	for (i = 0; i < NR_CPUS; i += threads_per_core) {
-		cpus_shift_left(tmp, threads_core_mask, i);
-		if (cpus_intersects(threads, tmp))
-			cpu_set(i, res);
+		cpumask_shift_left(&tmp, &threads_core_mask, i);
+		if (cpumask_intersects(threads, &tmp))
+			cpumask_set_cpu(i, &res);
 	}
 	return res;
 }
@@ -58,7 +58,7 @@ static inline int cpu_nr_cores(void)
 
 static inline cpumask_t cpu_online_cores_map(void)
 {
-	return cpu_thread_mask_to_cores(cpu_online_map);
+	return cpu_thread_mask_to_cores(cpu_online_mask);
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index 0893ab9343a..9c70d0ca96d 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -27,9 +27,8 @@ enum ppc_dbell {
 	PPC_G_DBELL_MC = 4,	/* guest mcheck doorbell */
 };
 
-extern void doorbell_message_pass(int target, int msg);
+extern void doorbell_cause_ipi(int cpu, unsigned long data);
 extern void doorbell_exception(struct pt_regs *regs);
-extern void doorbell_check_self(void);
 extern void doorbell_setup_this_cpu(void);
 
 static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 6d2416a8570..dd70fac57ec 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -42,6 +42,7 @@ extern void __dma_free_coherent(size_t size, void *vaddr);
 extern void __dma_sync(void *vaddr, size_t size, int direction);
 extern void __dma_sync_page(struct page *page, unsigned long offset,
 				 size_t size, int direction);
+extern unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr);
 
 #else /* ! CONFIG_NOT_COHERENT_CACHE */
 /*
@@ -198,6 +199,11 @@ static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
+extern int dma_mmap_coherent(struct device *, struct vm_area_struct *,
+			     void *, dma_addr_t, size_t);
+#define ARCH_HAS_DMA_MMAP_COHERENT
+
+
 static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		enum dma_data_direction direction)
 {
diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
index f0fb4fc1f6e..45921672b97 100644
--- a/arch/powerpc/include/asm/emulated_ops.h
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -52,6 +52,10 @@ extern struct ppc_emulated {
 #ifdef CONFIG_VSX
 	struct ppc_emulated_entry vsx;
 #endif
+#ifdef CONFIG_PPC64
+	struct ppc_emulated_entry mfdscr;
+	struct ppc_emulated_entry mtdscr;
+#endif
 } ppc_emulated;
 
 extern u32 ppc_warn_emulated;
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 7778d6f0c87..f5dfe3411f6 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -46,6 +46,7 @@
 #define EX_CCR		60
 #define EX_R3		64
 #define EX_LR		72
+#define EX_CFAR		80
 
 /*
  * We're short on space and time in the exception prolog, so we can't
@@ -56,30 +57,40 @@
 #define LOAD_HANDLER(reg, label)					\
 	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
 
-#define EXCEPTION_PROLOG_1(area)				\
-	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
+/* Exception register prefixes */
+#define EXC_HV	H
+#define EXC_STD
+
+#define EXCEPTION_PROLOG_1(area)					\
+	GET_PACA(r13);							\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
 	std	r10,area+EX_R10(r13);					\
 	std	r11,area+EX_R11(r13);					\
 	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG_SCRATCH0;					\
+	BEGIN_FTR_SECTION_NESTED(66);					\
+	mfspr	r10,SPRN_CFAR;						\
+	std	r10,area+EX_CFAR(r13);					\
+	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		\
+	GET_SCRATCH0(r9);						\
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
-#define EXCEPTION_PROLOG_PSERIES_1(label)				\
+#define __EXCEPTION_PROLOG_PSERIES_1(label, h)				\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label)						\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
+	mtspr	SPRN_##h##SRR0,r12;					\
+	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
+	mtspr	SPRN_##h##SRR1,r10;					\
+	h##rfid;							\
 	b	.	/* prevent speculative execution */
+#define EXCEPTION_PROLOG_PSERIES_1(label, h) \
+	__EXCEPTION_PROLOG_PSERIES_1(label, h)
 
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+#define EXCEPTION_PROLOG_PSERIES(area, label, h)			\
 	EXCEPTION_PROLOG_1(area);					\
-	EXCEPTION_PROLOG_PSERIES_1(label);
+	EXCEPTION_PROLOG_PSERIES_1(label, h);
 
 /*
  * The common exception prolog is used for all except a few exceptions
@@ -98,10 +109,11 @@
 	beq-	1f;							   \
 	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
 1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
-	bge-	cr1,2f;			/* abort if it is		*/ \
-	b	3f;							   \
-2:	li	r1,(n);			/* will be reloaded later	*/ \
+	blt+	cr1,3f;			/* abort if it is		*/ \
+	li	r1,(n);			/* will be reloaded later	*/ \
 	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	std	r3,area+EX_R3(r13);					   \
+	addi	r3,r13,area;		/* r3 -> where regs are saved*/	   \
 	b	bad_stack;						   \
 3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
@@ -123,6 +135,10 @@
 	std	r9,GPR11(r1);						   \
 	std	r10,GPR12(r1);						   \
 	std	r11,GPR13(r1);						   \
+	BEGIN_FTR_SECTION_NESTED(66);					   \
+	ld	r10,area+EX_CFAR(r13);					   \
+	std	r10,ORIG_GPR3(r1);					   \
+	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		   \
 	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
 	mflr	r9;			/* save LR in stackframe	*/ \
 	std	r9,_LINK(r1);						   \
@@ -143,57 +159,62 @@
 /*
  * Exception vectors.
  */
-#define STD_EXCEPTION_PSERIES(n, label)			\
-	. = n;						\
+#define STD_EXCEPTION_PSERIES(loc, vec, label)		\
+	. = loc;					\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
-	DO_KVM	n;					\
-	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+	DO_KVM	vec;					\
+	SET_SCRATCH0(r13);		/* save r13 */		\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, EXC_STD)
 
-#define HSTD_EXCEPTION_PSERIES(n, label)		\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
+#define STD_EXCEPTION_HV(loc, vec, label)		\
+	. = loc;					\
+	.globl label##_hv;				\
+label##_hv:						\
 	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG_SCRATCH0,r20;	/* save r20 */	\
-	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR0,r20;				\
-	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG_SCRATCH0;	/* restore r20 */ \
-	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+	DO_KVM	vec;					\
+	SET_SCRATCH0(r13);	/* save r13 */		\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, EXC_HV)
 
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
-	. = n;								\
-	.globl label##_pSeries;						\
-label##_pSeries:							\
+#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h)			\
 	HMT_MEDIUM;							\
-	DO_KVM	n;							\
-	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
-	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
+	DO_KVM	vec;							\
+	SET_SCRATCH0(r13);    /* save r13 */				\
+	GET_PACA(r13);							\
 	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
 	std	r10,PACA_EXGEN+EX_R10(r13);				\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	mfcr	r9;							\
 	cmpwi	r10,0;							\
-	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG_SCRATCH0;					\
+	beq	masked_##h##interrupt;					\
+	GET_SCRATCH0(r10);						\
 	std	r10,PACA_EXGEN+EX_R13(r13);				\
 	std	r11,PACA_EXGEN+EX_R11(r13);				\
 	std	r12,PACA_EXGEN+EX_R12(r13);				\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label##_common)				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
+	mtspr	SPRN_##h##SRR0,r12;					\
+	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
+	mtspr	SPRN_##h##SRR1,r10;					\
+	h##rfid;							\
 	b	.	/* prevent speculative execution */
+#define _MASKABLE_EXCEPTION_PSERIES(vec, label, h)			\
+	__MASKABLE_EXCEPTION_PSERIES(vec, label, h)
+
+#define MASKABLE_EXCEPTION_PSERIES(loc, vec, label)			\
+	. = loc;							\
+	.globl label##_pSeries;						\
+label##_pSeries:							\
+	_MASKABLE_EXCEPTION_PSERIES(vec, label, EXC_STD)
+
+#define MASKABLE_EXCEPTION_HV(loc, vec, label)				\
+	. = loc;							\
+	.globl label##_hv;						\
+label##_hv:								\
+	_MASKABLE_EXCEPTION_PSERIES(vec, label, EXC_HV)
 
 #ifdef CONFIG_PPC_ISERIES
 #define DISABLE_INTS				\
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index 921a8470e18..9a67a38bf7b 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -49,7 +49,7 @@ label##5:							\
 	FTR_ENTRY_OFFSET label##2b-label##5b;			\
 	FTR_ENTRY_OFFSET label##3b-label##5b;			\
 	FTR_ENTRY_OFFSET label##4b-label##5b;			\
-	.ifgt (label##4b-label##3b)-(label##2b-label##1b);	\
+	.ifgt (label##4b- label##3b)-(label##2b- label##1b);	\
 	.error "Feature section else case larger than body";	\
 	.endif;							\
 	.popsection;
@@ -146,6 +146,19 @@ label##5:							\
 
 #ifndef __ASSEMBLY__
 
+#define ASM_FTR_IF(section_if, section_else, msk, val)	\
+	stringify_in_c(BEGIN_FTR_SECTION)			\
+	section_if "; "						\
+	stringify_in_c(FTR_SECTION_ELSE)			\
+	section_else "; "					\
+	stringify_in_c(ALT_FTR_SECTION_END((msk), (val)))
+
+#define ASM_FTR_IFSET(section_if, section_else, msk)	\
+	ASM_FTR_IF(section_if, section_else, (msk), (msk))
+
+#define ASM_FTR_IFCLR(section_if, section_else, msk)	\
+	ASM_FTR_IF(section_if, section_else, (msk), 0)
+
 #define ASM_MMU_FTR_IF(section_if, section_else, msk, val)	\
 	stringify_in_c(BEGIN_MMU_FTR_SECTION)			\
 	section_if "; "						\
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 4ef662e4a31..3a6c586c4e4 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -47,6 +47,7 @@
 #define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
 #define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
 #define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
 
 #ifndef __ASSEMBLY__
 
@@ -60,7 +61,7 @@ enum {
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
 		FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
 		FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
-		FW_FEATURE_CMO | FW_FEATURE_VPHN,
+		FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index ec089acfa56..852b8c1c09d 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -102,6 +102,7 @@
 #define H_ANDCOND		(1UL<<(63-33))
 #define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
 #define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_COALESCE_CAND	(1UL<<(63-42))	/* page is a good candidate for coalescing */
 #define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
 #define H_COPY_PAGE		(1UL<<(63-49))
 #define H_N			(1UL<<(63-61))
@@ -122,7 +123,7 @@
 #define H_DABRX_KERNEL		(1UL<<(63-62))
 #define H_DABRX_USER		(1UL<<(63-63))
 
-/* Each control block has to be on a 4K bondary */
+/* Each control block has to be on a 4K boundary */
 #define H_CB_ALIGNMENT          4096
 
 /* pSeries hypervisor opcodes */
@@ -234,6 +235,7 @@
 #define H_GET_MPP		0x2D4
 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC
 #define H_BEST_ENERGY		0x2F4
+#define H_GET_MPP_X		0x314
 #define MAX_HCALL_OPCODE	H_BEST_ENERGY
 
 #ifndef __ASSEMBLY__
@@ -312,6 +314,16 @@ struct hvcall_mpp_data {
 
 int h_get_mpp(struct hvcall_mpp_data *);
 
+struct hvcall_mpp_x_data {
+	unsigned long coalesced_bytes;
+	unsigned long pool_coalesced_bytes;
+	unsigned long pool_purr_cycles;
+	unsigned long pool_spurr_cycles;
+	unsigned long reserved[3];
+};
+
+int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data);
+
 #ifdef CONFIG_PPC_PSERIES
 extern int CMO_PrPSP;
 extern int CMO_SecPSP;
diff --git a/arch/powerpc/platforms/cell/io-workarounds.h b/arch/powerpc/include/asm/io-workarounds.h
index 6efc7782ebf..fbae4928692 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.h
+++ b/arch/powerpc/include/asm/io-workarounds.h
@@ -31,7 +31,6 @@ struct iowa_bus {
 	void   *private;
 };
 
-void __devinit io_workaround_init(void);
 void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
 				 int (*)(struct iowa_bus *, void *), void *);
 struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 001f2f11c19..45698d55cd6 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -2,6 +2,8 @@
 #define _ASM_POWERPC_IO_H
 #ifdef __KERNEL__
 
+#define ARCH_HAS_IOREMAP_WC
+
 /*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -481,10 +483,16 @@ __do_out_asm(_rec_outl, "stwbrx")
 				_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
 #endif /* !CONFIG_EEH */
 
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define DEF_PCI_HOOK(x)		x
+#ifdef CONFIG_PPC_INDIRECT_PIO
+#define DEF_PCI_HOOK_pio(x)	x
+#else
+#define DEF_PCI_HOOK_pio(x)	NULL
+#endif
+
+#ifdef CONFIG_PPC_INDIRECT_MMIO
+#define DEF_PCI_HOOK_mem(x)	x
 #else
-#define DEF_PCI_HOOK(x)		NULL
+#define DEF_PCI_HOOK_mem(x)	NULL
 #endif
 
 /* Structure containing all the hooks */
@@ -504,7 +512,7 @@ extern struct ppc_pci_io {
 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
 static inline ret name at					\
 {								\
-	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+	if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL)	\
 		return ppc_pci_io.name al;			\
 	return __do_##name al;					\
 }
@@ -512,7 +520,7 @@ static inline ret name at					\
 #define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
 static inline void name at					\
 {								\
-	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+	if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL)		\
 		ppc_pci_io.name al;				\
 	else							\
 		__do_##name al;					\
@@ -616,12 +624,13 @@ static inline void iosync(void)
  * * ioremap is the standard one and provides non-cacheable guarded mappings
  *   and can be hooked by the platform via ppc_md
  *
- * * ioremap_flags allows to specify the page flags as an argument and can
- *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
- *   same thing as ioremap_flags.
+ * * ioremap_prot allows to specify the page flags as an argument and can
+ *   also be hooked by the platform via ppc_md.
  *
  * * ioremap_nocache is identical to ioremap
  *
+ * * ioremap_wc enables write combining
+ *
  * * iounmap undoes such a mapping and can be hooked
  *
  * * __ioremap_at (and the pending __iounmap_at) are low level functions to
@@ -629,7 +638,7 @@ static inline void iosync(void)
  *   currently be hooked. Must be page aligned.
  *
  * * __ioremap is the low level implementation used by ioremap and
- *   ioremap_flags and cannot be hooked (but can be used by a hook on one
+ *   ioremap_prot and cannot be hooked (but can be used by a hook on one
  *   of the previous ones)
  *
  * * __ioremap_caller is the same as above but takes an explicit caller
@@ -640,10 +649,10 @@ static inline void iosync(void)
  *
  */
 extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
-				   unsigned long flags);
+extern void __iomem *ioremap_prot(phys_addr_t address, unsigned long size,
+				  unsigned long flags);
+extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
 #define ioremap_nocache(addr, size)	ioremap((addr), (size))
-#define ioremap_prot(addr, size, prot)	ioremap_flags((addr), (size), (prot))
 
 extern void iounmap(volatile void __iomem *addr);
 
diff --git a/arch/powerpc/include/asm/io_event_irq.h b/arch/powerpc/include/asm/io_event_irq.h
new file mode 100644
index 00000000000..b1a9a1be3c2
--- /dev/null
+++ b/arch/powerpc/include/asm/io_event_irq.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2010, 2011 Mark Nelson and Tseng-Hui (Frank) Lin, IBM Corporation
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_IO_EVENT_IRQ_H
+#define _ASM_POWERPC_IO_EVENT_IRQ_H
+
+#include <linux/types.h>
+#include <linux/notifier.h>
+
+#define PSERIES_IOEI_RPC_MAX_LEN 216
+
+#define PSERIES_IOEI_TYPE_ERR_DETECTED		0x01
+#define PSERIES_IOEI_TYPE_ERR_RECOVERED		0x02
+#define PSERIES_IOEI_TYPE_EVENT			0x03
+#define PSERIES_IOEI_TYPE_RPC_PASS_THRU		0x04
+
+#define PSERIES_IOEI_SUBTYPE_NOT_APP		0x00
+#define PSERIES_IOEI_SUBTYPE_REBALANCE_REQ	0x01
+#define PSERIES_IOEI_SUBTYPE_NODE_ONLINE	0x03
+#define PSERIES_IOEI_SUBTYPE_NODE_OFFLINE	0x04
+#define PSERIES_IOEI_SUBTYPE_DUMP_SIZE_CHANGE	0x05
+#define PSERIES_IOEI_SUBTYPE_TORRENT_IRV_UPDATE	0x06
+#define PSERIES_IOEI_SUBTYPE_TORRENT_HFI_CFGED	0x07
+
+#define PSERIES_IOEI_SCOPE_NOT_APP		0x00
+#define PSERIES_IOEI_SCOPE_RIO_HUB		0x36
+#define PSERIES_IOEI_SCOPE_RIO_BRIDGE		0x37
+#define PSERIES_IOEI_SCOPE_PHB			0x38
+#define PSERIES_IOEI_SCOPE_EADS_GLOBAL		0x39
+#define PSERIES_IOEI_SCOPE_EADS_SLOT		0x3A
+#define PSERIES_IOEI_SCOPE_TORRENT_HUB		0x3B
+#define PSERIES_IOEI_SCOPE_SERVICE_PROC		0x51
+
+/* Platform Event Log Format, Version 6, data portition of IO event section */
+struct pseries_io_event {
+	uint8_t event_type;		/* 0x00 IO-Event Type		*/
+	uint8_t rpc_data_len;		/* 0x01 RPC data length		*/
+	uint8_t scope;			/* 0x02 Error/Event Scope	*/
+	uint8_t event_subtype;		/* 0x03 I/O-Event Sub-Type	*/
+	uint32_t drc_index;		/* 0x04 DRC Index		*/
+	uint8_t rpc_data[PSERIES_IOEI_RPC_MAX_LEN];
+					/* 0x08 RPC Data (0-216 bytes,	*/
+					/* padded to 4 bytes alignment)	*/
+};
+
+extern struct atomic_notifier_head pseries_ioei_notifier_list;
+
+#endif /* _ASM_POWERPC_IO_EVENT_IRQ_H */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 67ab5fb7d15..1bff591f7f7 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -88,9 +88,6 @@ struct irq_host_ops {
 	/* Dispose of such a mapping */
 	void (*unmap)(struct irq_host *h, unsigned int virq);
 
-	/* Update of such a mapping  */
-	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
 	/* Translate device-tree interrupt specifier from raw format coming
 	 * from the firmware to a irq_hw_number_t (interrupt line number) and
 	 * type (sense) that can be passed to set_irq_type(). In the absence
@@ -128,19 +125,10 @@ struct irq_host {
 	struct device_node	*of_node;
 };
 
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
-	irq_hw_number_t	hwirq;
-	struct irq_host	*host;
-};
-
-extern struct irq_map_entry irq_map[NR_IRQS];
-
+struct irq_data;
+extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
 extern irq_hw_number_t virq_to_hw(unsigned int virq);
+extern bool virq_is_host(unsigned int virq, struct irq_host *host);
 
 /**
  * irq_alloc_host - Allocate a new irq_host data structure
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index f54408d995b..8a33698c61b 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -76,7 +76,7 @@ extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
 extern cpumask_t cpus_in_sr;
 static inline int kexec_sr_activated(int cpu)
 {
-	return cpu_isset(cpu,cpus_in_sr);
+	return cpumask_test_cpu(cpu, &cpus_in_sr);
 }
 
 struct kimage;
diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index d0e7701fa1f..be0171afdc0 100644
--- a/arch/powerpc/include/asm/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -50,7 +50,7 @@ typedef unsigned int kprobe_opcode_t;
  * Handle cases where:
  * 		- User passes a <.symbol> or <module:.symbol>
  * 		- User passes a <symbol> or <module:symbol>
- * 		- User passes a non-existant symbol, kallsyms_lookup_name
+ * 		- User passes a non-existent symbol, kallsyms_lookup_name
  * 		  returns 0. Don't deref the NULL pointer in that case
  */
 #define kprobe_lookup_name(name, addr)					\
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 5b750467439..0951b17f4eb 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -59,6 +59,7 @@
 #define BOOK3S_INTERRUPT_INST_SEGMENT	0x480
 #define BOOK3S_INTERRUPT_EXTERNAL	0x500
 #define BOOK3S_INTERRUPT_EXTERNAL_LEVEL	0x501
+#define BOOK3S_INTERRUPT_EXTERNAL_HV	0x502
 #define BOOK3S_INTERRUPT_ALIGNMENT	0x600
 #define BOOK3S_INTERRUPT_PROGRAM	0x700
 #define BOOK3S_INTERRUPT_FP_UNAVAIL	0x800
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index 36fdb3aff30..d5a8a386163 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -34,6 +34,7 @@
 	    (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+	    (\intno == BOOK3S_INTERRUPT_EXTERNAL_HV) || \
 	    (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
 	    (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 26b8c807f8f..e0298d26ce5 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -105,7 +105,7 @@ struct lppaca {
 	// processing of external interrupts.  Note that PLIC will store the
 	// XIRR directly into the xXirrValue field so that another XIRR will
 	// not be presented until this one clears.  The layout of the low
-	// 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
+	// 4-bytes of this Dword is up to SLIC - PLIC just checks whether the
 	// entire Dword is zero or not.  A non-zero value in the low order
 	// 2-bytes will result in SLIC being granted the highest thread
 	// priority upon return.  A 0 will return to SLIC as medium priority.
@@ -210,6 +210,8 @@ struct dtl_entry {
 #define DISPATCH_LOG_BYTES	4096	/* bytes per cpu */
 #define N_DISPATCH_LOG		(DISPATCH_LOG_BYTES / sizeof(struct dtl_entry))
 
+extern struct kmem_cache *dtl_cache;
+
 /*
  * When CONFIG_VIRT_CPU_ACCOUNTING = y, the cpu accounting code controls
  * reading from the dispatch trace log.  If other code wants to consume
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index fe56a23e1ff..47cacddb14c 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -29,21 +29,6 @@ struct file;
 struct pci_controller;
 struct kimage;
 
-#ifdef CONFIG_SMP
-struct smp_ops_t {
-	void  (*message_pass)(int target, int msg);
-	int   (*probe)(void);
-	void  (*kick_cpu)(int nr);
-	void  (*setup_cpu)(int nr);
-	void  (*take_timebase)(void);
-	void  (*give_timebase)(void);
-	int   (*cpu_enable)(unsigned int nr);
-	int   (*cpu_disable)(void);
-	void  (*cpu_die)(unsigned int nr);
-	int   (*cpu_bootable)(unsigned int nr);
-};
-#endif
-
 struct machdep_calls {
 	char		*name;
 #ifdef CONFIG_PPC64
@@ -267,7 +252,7 @@ struct machdep_calls {
 
 extern void e500_idle(void);
 extern void power4_idle(void);
-extern void power4_cpu_offline_powersave(void);
+extern void power7_idle(void);
 extern void ppc6xx_idle(void);
 extern void book3e_idle(void);
 
@@ -312,12 +297,6 @@ extern sys_ctrler_t sys_ctrler;
 
 #endif /* CONFIG_PPC_PMAC */
 
-#ifdef CONFIG_SMP
-/* Poor default implementations */
-extern void __devinit smp_generic_give_timebase(void);
-extern void __devinit smp_generic_take_timebase(void);
-#endif /* CONFIG_SMP */
-
 
 /* Functions to produce codes on the leds.
  * The SRC code should be unique for the message category and should
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 17194fcd404..3ea0f9a259d 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -43,6 +43,7 @@
 #define MAS0_TLBSEL(x)		(((x) << 28) & 0x30000000)
 #define MAS0_ESEL(x)		(((x) << 16) & 0x0FFF0000)
 #define MAS0_NV(x)		((x) & 0x00000FFF)
+#define MAS0_ESEL_MASK		0x0FFF0000
 #define MAS0_HES		0x00004000
 #define MAS0_WQ_ALLWAYS		0x00000000
 #define MAS0_WQ_COND		0x00001000
@@ -137,6 +138,21 @@
 #define MMUCSR0_TLB2PS	0x00078000	/* TLB2 Page Size */
 #define MMUCSR0_TLB3PS	0x00780000	/* TLB3 Page Size */
 
+/* MMUCFG bits */
+#define MMUCFG_MAVN_NASK	0x00000003
+#define MMUCFG_MAVN_V1_0	0x00000000
+#define MMUCFG_MAVN_V2_0	0x00000001
+#define MMUCFG_NTLB_MASK	0x0000000c
+#define MMUCFG_NTLB_SHIFT	2
+#define MMUCFG_PIDSIZE_MASK	0x000007c0
+#define MMUCFG_PIDSIZE_SHIFT	6
+#define MMUCFG_TWC		0x00008000
+#define MMUCFG_LRAT		0x00010000
+#define MMUCFG_RASIZE_MASK	0x00fe0000
+#define MMUCFG_RASIZE_SHIFT	17
+#define MMUCFG_LPIDSIZE_MASK	0x0f000000
+#define MMUCFG_LPIDSIZE_SHIFT	24
+
 /* TLBnCFG encoding */
 #define TLBnCFG_N_ENTRY		0x00000fff	/* number of entries */
 #define TLBnCFG_HES		0x00002000	/* HW select supported */
@@ -229,6 +245,10 @@ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 extern int mmu_linear_psize;
 extern int mmu_vmemmap_psize;
 
+#ifdef CONFIG_PPC64
+extern unsigned long linear_map_top;
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index acac35d5b38..d865bd909c7 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -27,7 +27,7 @@
 #define STE_VSID_SHIFT	12
 
 /* Location of cpu0's segment table */
-#define STAB0_PAGE	0x6
+#define STAB0_PAGE	0x8
 #define STAB0_OFFSET	(STAB0_PAGE << 12)
 #define STAB0_PHYS_ADDR	(STAB0_OFFSET + PHYSICAL_START)
 
@@ -408,6 +408,7 @@ static inline void subpage_prot_init_new_context(struct mm_struct *mm) { }
 #endif /* CONFIG_PPC_SUBPAGE_PROT */
 
 typedef unsigned long mm_context_id_t;
+struct spinlock;
 
 typedef struct {
 	mm_context_id_t id;
@@ -423,6 +424,11 @@ typedef struct {
 #ifdef CONFIG_PPC_SUBPAGE_PROT
 	struct subpage_prot_table spt;
 #endif /* CONFIG_PPC_SUBPAGE_PROT */
+#ifdef CONFIG_PPC_ICSWX
+	struct spinlock *cop_lockp; /* guard acop and cop_pid */
+	unsigned long acop;	/* mask of enabled coprocessor types */
+	unsigned int cop_pid;	/* pid value used with coprocessors */
+#endif /* CONFIG_PPC_ICSWX */
 } mm_context_t;
 
 
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index bb40a06d3b7..4138b21ae80 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -56,11 +56,6 @@
  */
 #define MMU_FTR_NEED_DTLB_SW_LRU	ASM_CONST(0x00200000)
 
-/* This indicates that the processor uses the ISA 2.06 server tlbie
- * mnemonics
- */
-#define MMU_FTR_TLBIE_206		ASM_CONST(0x00400000)
-
 /* Enable use of TLB reservation.  Processor should support tlbsrx.
  * instruction and MAS0[WQ].
  */
@@ -70,6 +65,53 @@
  */
 #define MMU_FTR_USE_PAIRED_MAS		ASM_CONST(0x01000000)
 
+/* MMU is SLB-based
+ */
+#define MMU_FTR_SLB			ASM_CONST(0x02000000)
+
+/* Support 16M large pages
+ */
+#define MMU_FTR_16M_PAGE		ASM_CONST(0x04000000)
+
+/* Supports TLBIEL variant
+ */
+#define MMU_FTR_TLBIEL			ASM_CONST(0x08000000)
+
+/* Supports tlbies w/o locking
+ */
+#define MMU_FTR_LOCKLESS_TLBIE		ASM_CONST(0x10000000)
+
+/* Large pages can be marked CI
+ */
+#define MMU_FTR_CI_LARGE_PAGE		ASM_CONST(0x20000000)
+
+/* 1T segments available
+ */
+#define MMU_FTR_1T_SEGMENT		ASM_CONST(0x40000000)
+
+/* Doesn't support the B bit (1T segment) in SLBIE
+ */
+#define MMU_FTR_NO_SLBIE_B		ASM_CONST(0x80000000)
+
+/* MMU feature bit sets for various CPUs */
+#define MMU_FTRS_DEFAULT_HPTE_ARCH_V2	\
+	MMU_FTR_HPTE_TABLE | MMU_FTR_PPCAS_ARCH_V2
+#define MMU_FTRS_POWER4		MMU_FTRS_DEFAULT_HPTE_ARCH_V2
+#define MMU_FTRS_PPC970		MMU_FTRS_POWER4
+#define MMU_FTRS_POWER5		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_CELL		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
+				MMU_FTR_CI_LARGE_PAGE
+#define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
+				MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B
+#define MMU_FTRS_A2		MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | \
+				MMU_FTR_USE_TLBIVAX_BCAST | \
+				MMU_FTR_LOCK_BCAST_INVAL | \
+				MMU_FTR_USE_TLBRSRV | \
+				MMU_FTR_USE_PAIRED_MAS | \
+				MMU_FTR_TLBIEL | \
+				MMU_FTR_16M_PAGE
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 81fb41289d6..a73668a5f30 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -32,6 +32,10 @@ extern void __destroy_context(unsigned long context_id);
 extern void mmu_context_init(void);
 #endif
 
+extern void switch_cop(struct mm_struct *next);
+extern int use_cop(unsigned long acop, struct mm_struct *mm);
+extern void drop_cop(unsigned long acop, struct mm_struct *mm);
+
 /*
  * switch_mm is the entry point called from the architecture independent
  * code in kernel/sched.c
@@ -55,6 +59,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	if (prev == next)
 		return;
 
+#ifdef CONFIG_PPC_ICSWX
+	/* Switch coprocessor context only if prev or next uses a coprocessor */
+	if (prev->context.acop || next->context.acop)
+		switch_cop(next);
+#endif /* CONFIG_PPC_ICSWX */
+
 	/* We must stop all altivec streams before changing the HW
 	 * context
 	 */
@@ -67,7 +77,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 * sub architectures.
 	 */
 #ifdef CONFIG_PPC_STD_MMU_64
-	if (cpu_has_feature(CPU_FTR_SLB))
+	if (mmu_has_feature(MMU_FTR_SLB))
 		switch_slb(tsk, next);
 	else
 		switch_stab(tsk, next);
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index 7005ee0b074..df18989e78d 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -3,7 +3,6 @@
 #ifdef __KERNEL__
 
 #include <linux/irq.h>
-#include <linux/sysdev.h>
 #include <asm/dcr.h>
 #include <asm/msi_bitmap.h>
 
@@ -263,6 +262,7 @@ struct mpic
 #ifdef CONFIG_SMP
 	struct irq_chip		hc_ipi;
 #endif
+	struct irq_chip		hc_tm;
 	const char		*name;
 	/* Flags */
 	unsigned int		flags;
@@ -281,7 +281,7 @@ struct mpic
 
 	/* vector numbers used for internal sources (ipi/timers) */
 	unsigned int		ipi_vecs[4];
-	unsigned int		timer_vecs[4];
+	unsigned int		timer_vecs[8];
 
 	/* Spurious vector to program into unused sources */
 	unsigned int		spurious_vec;
@@ -320,8 +320,6 @@ struct mpic
 	/* link */
 	struct mpic		*next;
 
-	struct sys_device	sysdev;
-
 #ifdef CONFIG_PM
 	struct mpic_irq_save	*save_data;
 #endif
@@ -371,6 +369,8 @@ struct mpic
  * NOTE: This flag trumps MPIC_WANTS_RESET.
  */
 #define MPIC_NO_RESET			0x00004000
+/* Freescale MPIC (compatible includes "fsl,mpic") */
+#define MPIC_FSL			0x00008000
 
 /* MPIC HW modification ID */
 #define MPIC_REGSET_MASK		0xf0000000
diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
index d4b4bfa26fb..89d2f99c1bf 100644
--- a/arch/powerpc/include/asm/pSeries_reconfig.h
+++ b/arch/powerpc/include/asm/pSeries_reconfig.h
@@ -18,13 +18,18 @@
 extern int pSeries_reconfig_notifier_register(struct notifier_block *);
 extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
 extern struct blocking_notifier_head pSeries_reconfig_chain;
+/* Not the best place to put this, will be fixed when we move some
+ * of the rtas suspend-me stuff to pseries */
+extern void pSeries_coalesce_init(void);
 #else /* !CONFIG_PPC_PSERIES */
 static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
 {
 	return 0;
 }
 static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+static inline void pSeries_coalesce_init(void) { }
 #endif /* CONFIG_PPC_PSERIES */
 
+
 #endif /* __KERNEL__ */
 #endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index ec57540cd7a..74126765106 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -92,9 +92,9 @@ struct paca_struct {
 	 * Now, starting in cacheline 2, the exception save areas
 	 */
 	/* used for most interrupts/exceptions */
-	u64 exgen[10] __attribute__((aligned(0x80)));
-	u64 exmc[10];		/* used for machine checks */
-	u64 exslb[10];		/* used for SLB/segment table misses
+	u64 exgen[11] __attribute__((aligned(0x80)));
+	u64 exmc[11];		/* used for machine checks */
+	u64 exslb[11];		/* used for SLB/segment table misses
  				 * on the linear mapping */
 	/* SLB related definitions */
 	u16 vmalloc_sllp;
@@ -106,7 +106,8 @@ struct paca_struct {
 	pgd_t *pgd;			/* Current PGD */
 	pgd_t *kernel_pgd;		/* Kernel PGD */
 	u64 exgen[8] __attribute__((aligned(0x80)));
-	u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80)));
+	/* We can have up to 3 levels of reentrancy in the TLB miss handler */
+	u64 extlb[3][EX_TLB_SIZE / sizeof(u64)] __attribute__((aligned(0x80)));
 	u64 exmc[8];		/* used for machine checks */
 	u64 excrit[8];		/* used for crit interrupts */
 	u64 exdbg[8];		/* used for debug interrupts */
@@ -125,7 +126,7 @@ struct paca_struct {
 	struct task_struct *__current;	/* Pointer to current */
 	u64 kstack;			/* Saved Kernel stack addr */
 	u64 stab_rr;			/* stab/slb round-robin counter */
-	u64 saved_r1;			/* r1 save for RTAS calls */
+	u64 saved_r1;			/* r1 save for RTAS calls or PM */
 	u64 saved_msr;			/* MSR saved here by enter_rtas */
 	u16 trap_save;			/* Used when bad stack is encountered */
 	u8 soft_enabled;		/* irq soft-enable flag */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index da4b2000854..2cd664ef0a5 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -100,7 +100,7 @@ extern phys_addr_t kernstart_addr;
 #endif
 
 #ifdef CONFIG_FLATMEM
-#define ARCH_PFN_OFFSET		(MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET		((unsigned long)(MEMORY_START >> PAGE_SHIFT))
 #define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
 #endif
 
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 932f88dcf6f..9356262fd3c 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -59,24 +59,7 @@ static __inline__ void clear_page(void *addr)
 	: "ctr", "memory");
 }
 
-extern void copy_4K_page(void *to, void *from);
-
-#ifdef CONFIG_PPC_64K_PAGES
-static inline void copy_page(void *to, void *from)
-{
-	unsigned int i;
-	for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) {
-		copy_4K_page(to, from);
-		to += 4096;
-		from += 4096;
-	}
-}
-#else /* CONFIG_PPC_64K_PAGES */
-static inline void copy_page(void *to, void *from)
-{
-	copy_4K_page(to, from);
-}
-#endif /* CONFIG_PPC_64K_PAGES */
+extern void copy_page(void *to, void *from);
 
 /* Log 2 of page table size */
 extern u64 ppc64_pft_size;
@@ -130,7 +113,7 @@ extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
 extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
 				  unsigned long len, unsigned int psize);
 
-#define slice_mm_new_context(mm)	((mm)->context.id == 0)
+#define slice_mm_new_context(mm)	((mm)->context.id == MMU_NO_CONTEXT)
 
 #endif /* __ASSEMBLY__ */
 #else
@@ -169,7 +152,7 @@ do {						\
 /*
  * This is the default if a program doesn't have a PT_GNU_STACK
  * program header entry. The PPC64 ELF ABI has a non executable stack
- * stack by default, so in the absense of a PT_GNU_STACK program header
+ * stack by default, so in the absence of a PT_GNU_STACK program header
  * we turn execute permission off.
  */
 #define VM_STACK_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h
index 19fd7933e2d..eafa5a5f56d 100644
--- a/arch/powerpc/include/asm/pasemi_dma.h
+++ b/arch/powerpc/include/asm/pasemi_dma.h
@@ -522,7 +522,7 @@ extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size,
 extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
 				dma_addr_t *handle);
 
-/* Routines to allocate flags (events) for channel syncronization */
+/* Routines to allocate flags (events) for channel synchronization */
 extern int  pasemi_dma_alloc_flag(void);
 extern void pasemi_dma_free_flag(int flag);
 extern void pasemi_dma_set_flag(int flag);
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 5e156e034fe..b90dbf8e5cd 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -106,7 +106,7 @@ struct pci_controller {
 	 * Used for variants of PCI indirect handling and possible quirks:
 	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
 	 *  EXT_REG - provides access to PCI-e extended registers
-	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *  SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
 	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
 	 *   to determine which bus number to match on when generating type0
 	 *   config cycles
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 2b09cd522d3..81576ee0cfb 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -257,21 +257,20 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pte_t *ptep)
 {
-	unsigned long old;
 
-       	if ((pte_val(*ptep) & _PAGE_RW) == 0)
-       		return;
-	old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+
+	pte_update(mm, addr, ptep, _PAGE_RW, 0);
 }
 
 static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 					   unsigned long addr, pte_t *ptep)
 {
-	unsigned long old;
-
 	if ((pte_val(*ptep) & _PAGE_RW) == 0)
 		return;
-	old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+
+	pte_update(mm, addr, ptep, _PAGE_RW, 1);
 }
 
 /*
diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h
index 00eedc5a4e6..10902c9375d 100644
--- a/arch/powerpc/include/asm/pmac_feature.h
+++ b/arch/powerpc/include/asm/pmac_feature.h
@@ -53,8 +53,8 @@
 
 /* Here is the infamous serie of OHare based machines
  */
-#define PMAC_TYPE_COMET			0x20	/* Beleived to be PowerBook 2400 */
-#define PMAC_TYPE_HOOPER		0x21	/* Beleived to be PowerBook 3400 */
+#define PMAC_TYPE_COMET			0x20	/* Believed to be PowerBook 2400 */
+#define PMAC_TYPE_HOOPER		0x21	/* Believed to be PowerBook 3400 */
 #define PMAC_TYPE_KANGA			0x22	/* PowerBook 3500 (first G3) */
 #define PMAC_TYPE_ALCHEMY		0x23	/* Alchemy motherboard base */
 #define PMAC_TYPE_GAZELLE		0x24	/* Spartacus, some 5xxx/6xxx */
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 1255569387b..e472659d906 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -41,6 +41,10 @@
 #define PPC_INST_RFCI			0x4c000066
 #define PPC_INST_RFDI			0x4c00004e
 #define PPC_INST_RFMCI			0x4c00004c
+#define PPC_INST_MFSPR_DSCR		0x7c1102a6
+#define PPC_INST_MFSPR_DSCR_MASK	0xfc1fffff
+#define PPC_INST_MTSPR_DSCR		0x7c1103a6
+#define PPC_INST_MTSPR_DSCR_MASK	0xfc1fffff
 
 #define PPC_INST_STRING			0x7c00042a
 #define PPC_INST_STRING_MASK		0xfc0007fe
@@ -56,6 +60,17 @@
 #define PPC_INST_TLBSRX_DOT		0x7c0006a5
 #define PPC_INST_XXLOR			0xf0000510
 
+#define PPC_INST_NAP			0x4c000364
+#define PPC_INST_SLEEP			0x4c0003a4
+
+/* A2 specific instructions */
+#define PPC_INST_ERATWE			0x7c0001a6
+#define PPC_INST_ERATRE			0x7c000166
+#define PPC_INST_ERATILX		0x7c000066
+#define PPC_INST_ERATIVAX		0x7c000666
+#define PPC_INST_ERATSX			0x7c000126
+#define PPC_INST_ERATSX_DOT		0x7c000127
+
 /* macros to insert fields into opcodes */
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
 #define __PPC_RB(b)	(((b) & 0x1f) << 11)
@@ -67,6 +82,8 @@
 #define __PPC_XT(s)	__PPC_XS(s)
 #define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
 #define __PPC_WC(w)	(((w) & 0x3) << 21)
+#define __PPC_WS(w)	(((w) & 0x1f) << 11)
+
 /*
  * Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
  * larx with EH set as an illegal instruction.
@@ -113,6 +130,21 @@
 #define PPC_TLBIVAX(a,b)	stringify_in_c(.long PPC_INST_TLBIVAX | \
 					__PPC_RA(a) | __PPC_RB(b))
 
+#define PPC_ERATWE(s, a, w)	stringify_in_c(.long PPC_INST_ERATWE | \
+					__PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
+#define PPC_ERATRE(s, a, w)	stringify_in_c(.long PPC_INST_ERATRE | \
+					__PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
+#define PPC_ERATILX(t, a, b)	stringify_in_c(.long PPC_INST_ERATILX | \
+					__PPC_T_TLB(t) | __PPC_RA(a) | \
+					__PPC_RB(b))
+#define PPC_ERATIVAX(s, a, b)	stringify_in_c(.long PPC_INST_ERATIVAX | \
+					__PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b))
+#define PPC_ERATSX(t, a, w)	stringify_in_c(.long PPC_INST_ERATSX | \
+					__PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+#define PPC_ERATSX_DOT(t, a, w)	stringify_in_c(.long PPC_INST_ERATSX_DOT | \
+					__PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+
+
 /*
  * Define what the VSX XX1 form instructions will look like, then add
  * the 128 bit load store instructions based on that.
@@ -126,4 +158,7 @@
 #define XXLOR(t, a, b)		stringify_in_c(.long PPC_INST_XXLOR | \
 					       VSX_XX3((t), (a), (b)))
 
+#define PPC_NAP			stringify_in_c(.long PPC_INST_NAP)
+#define PPC_SLEEP		stringify_in_c(.long PPC_INST_SLEEP)
+
 #endif /* _ASM_POWERPC_PPC_OPCODE_H */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 98210067c1c..1b422381fc1 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -170,6 +170,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define HMT_MEDIUM	or	2,2,2
 #define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
 #define HMT_HIGH	or	3,3,3
+#define HMT_EXTRA_HIGH	or	7,7,7		# power7 only
 
 #ifdef __KERNEL__
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index de1967a1ff5..d50c2b6d9bc 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -238,6 +238,10 @@ struct thread_struct {
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
 	void*		kvm_shadow_vcpu; /* KVM internal data */
 #endif /* CONFIG_KVM_BOOK3S_32_HANDLER */
+#ifdef CONFIG_PPC64
+	unsigned long	dscr;
+	int		dscr_inherit;
+#endif
 };
 
 #define ARCH_MIN_TASKALIGN 16
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index 76bb195e4f2..8d1569c2904 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -86,7 +86,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 #define PTE_RPN_MASK	(~((1UL<<PTE_RPN_SHIFT)-1))
 #endif
 
-/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
+/* _PAGE_CHG_MASK masks of bits that are to be preserved across
  * pgprot changes
  */
 #define _PAGE_CHG_MASK	(PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
@@ -162,7 +162,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
  * on platforms where such control is possible.
  */
 #if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
-	defined(CONFIG_KPROBES)
+	defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE)
 #define PAGE_KERNEL_TEXT	PAGE_KERNEL_X
 #else
 #define PAGE_KERNEL_TEXT	PAGE_KERNEL_ROX
@@ -174,7 +174,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 /*
  * Don't just check for any non zero bits in __PAGE_USER, since for book3e
  * and PTE_64BIT, PAGE_KERNEL_X contains _PAGE_BAP_SR which is also in
- * _PAGE_USER.  Need to explictly match _PAGE_BAP_UR bit in that case too.
+ * _PAGE_USER.  Need to explicitly match _PAGE_BAP_UR bit in that case too.
  */
 #define pte_user(val)		((val & _PAGE_USER) == _PAGE_USER)
 
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
index 9e2cb201916..f706164b0bd 100644
--- a/arch/powerpc/include/asm/qe_ic.h
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -81,7 +81,7 @@ int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
 static inline void qe_ic_cascade_low_ipic(unsigned int irq,
 					  struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
 
 	if (cascade_irq != NO_IRQ)
@@ -91,7 +91,7 @@ static inline void qe_ic_cascade_low_ipic(unsigned int irq,
 static inline void qe_ic_cascade_high_ipic(unsigned int irq,
 					   struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
 
 	if (cascade_irq != NO_IRQ)
@@ -101,9 +101,9 @@ static inline void qe_ic_cascade_high_ipic(unsigned int irq,
 static inline void qe_ic_cascade_low_mpic(unsigned int irq,
 					  struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
@@ -114,9 +114,9 @@ static inline void qe_ic_cascade_low_mpic(unsigned int irq,
 static inline void qe_ic_cascade_high_mpic(unsigned int irq,
 					   struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
@@ -127,9 +127,9 @@ static inline void qe_ic_cascade_high_mpic(unsigned int irq,
 static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
 					    struct irq_desc *desc)
 {
-	struct qe_ic *qe_ic = get_irq_desc_data(desc);
+	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
 	unsigned int cascade_irq;
-	struct irq_chip *chip = get_irq_desc_chip(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 
 	cascade_irq = qe_ic_get_high_irq(qe_ic);
 	if (cascade_irq == NO_IRQ)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 7e4abebe76c..c5cae0dd176 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -99,17 +99,23 @@
 #define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
 
 #if defined(CONFIG_PPC_BOOK3S_64)
+#define MSR_64BIT	MSR_SF
+
 /* Server variant */
 #define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
-#define MSR_KERNEL      MSR_ | MSR_SF
+#define MSR_KERNEL	MSR_ | MSR_64BIT
 #define MSR_USER32	MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64	MSR_USER32 | MSR_SF
+#define MSR_USER64	MSR_USER32 | MSR_64BIT
 #elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx)
 /* Default MSR for kernel mode. */
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
 #endif
 
+#ifndef MSR_64BIT
+#define MSR_64BIT	0
+#endif
+
 /* Floating Point Status and Control Register (FPSCR) Fields */
 #define FPSCR_FX	0x80000000	/* FPU exception summary */
 #define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
@@ -182,6 +188,8 @@
 
 #define SPRN_CTR	0x009	/* Count Register */
 #define SPRN_DSCR	0x11
+#define SPRN_CFAR	0x1c	/* Come From Address Register */
+#define SPRN_ACOP	0x1F	/* Available Coprocessor Register */
 #define SPRN_CTRLF	0x088
 #define SPRN_CTRLT	0x098
 #define   CTRL_CT	0xc0000000	/* current thread */
@@ -210,8 +218,43 @@
 #define SPRN_TBWL	0x11C	/* Time Base Lower Register (super, R/W) */
 #define SPRN_TBWU	0x11D	/* Time Base Upper Register (super, R/W) */
 #define SPRN_SPURR	0x134	/* Scaled PURR */
+#define SPRN_HSPRG0	0x130	/* Hypervisor Scratch 0 */
+#define SPRN_HSPRG1	0x131	/* Hypervisor Scratch 1 */
+#define SPRN_HDSISR     0x132
+#define SPRN_HDAR       0x133
+#define SPRN_HDEC	0x136	/* Hypervisor Decrementer */
 #define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
+#define SPRN_RMOR	0x138	/* Real mode offset register */
+#define SPRN_HRMOR	0x139	/* Real mode offset register */
+#define SPRN_HSRR0	0x13A	/* Hypervisor Save/Restore 0 */
+#define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
+#define   LPCR_VPM0	(1ul << (63-0))
+#define   LPCR_VPM1	(1ul << (63-1))
+#define   LPCR_ISL	(1ul << (63-2))
+#define   LPCR_DPFD_SH	(63-11)
+#define   LPCR_VRMA_L	(1ul << (63-12))
+#define   LPCR_VRMA_LP0	(1ul << (63-15))
+#define   LPCR_VRMA_LP1	(1ul << (63-16))
+#define   LPCR_RMLS    0x1C000000      /* impl dependent rmo limit sel */
+#define   LPCR_ILE     0x02000000      /* !HV irqs set MSR:LE */
+#define   LPCR_PECE	0x00007000	/* powersave exit cause enable */
+#define     LPCR_PECE0	0x00004000	/* ext. exceptions can cause exit */
+#define     LPCR_PECE1	0x00002000	/* decrementer can cause exit */
+#define     LPCR_PECE2	0x00001000	/* machine check etc can cause exit */
+#define   LPCR_MER	0x00000800	/* Mediated External Exception */
+#define   LPCR_LPES0   0x00000008      /* LPAR Env selector 0 */
+#define   LPCR_LPES1   0x00000004      /* LPAR Env selector 1 */
+#define   LPCR_RMI     0x00000002      /* real mode is cache inhibit */
+#define   LPCR_HDICE   0x00000001      /* Hyp Decr enable (HV,PR,EE) */
+#define SPRN_LPID	0x13F	/* Logical Partition Identifier */
+#define	SPRN_HMER	0x150	/* Hardware m? error recovery */
+#define	SPRN_HMEER	0x151	/* Hardware m? enable error recovery */
+#define	SPRN_HEIR	0x153	/* Hypervisor Emulated Instruction Register */
+#define SPRN_TLBINDEXR	0x154	/* P7 TLB control register */
+#define SPRN_TLBVPNR	0x155	/* P7 TLB control register */
+#define SPRN_TLBRPNR	0x156	/* P7 TLB control register */
+#define SPRN_TLBLPIDR	0x157	/* P7 TLB control register */
 #define SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
 #define SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */
 #define SPRN_DBAT1L	0x21B	/* Data BAT 1 Lower Register */
@@ -434,16 +477,23 @@
 #define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
 #define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
 #define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
-#define   SRR1_WAKERESET	0x00380000 /* System reset */
 #define   SRR1_WAKESYSERR	0x00300000 /* System error */
 #define   SRR1_WAKEEE		0x00200000 /* External interrupt */
 #define   SRR1_WAKEMT		0x00280000 /* mtctrl */
+#define	  SRR1_WAKEHMI		0x00280000 /* Hypervisor maintenance */
 #define   SRR1_WAKEDEC		0x00180000 /* Decrementer interrupt */
 #define   SRR1_WAKETHERM	0x00100000 /* Thermal management interrupt */
+#define	  SRR1_WAKERESET	0x00100000 /* System reset */
+#define	  SRR1_WAKESTATE	0x00030000 /* Powersave exit mask [46:47] */
+#define	  SRR1_WS_DEEPEST	0x00030000 /* Some resources not maintained,
+					  * may not be recoverable */
+#define	  SRR1_WS_DEEPER	0x00020000 /* Some resources not maintained */
+#define	  SRR1_WS_DEEP		0x00010000 /* All resources maintained */
 #define   SRR1_PROGFPE		0x00100000 /* Floating Point Enabled */
 #define   SRR1_PROGPRIV		0x00040000 /* Privileged instruction */
 #define   SRR1_PROGTRAP		0x00020000 /* Trap */
 #define   SRR1_PROGADDR		0x00010000 /* SRR0 contains subsequent addr */
+
 #define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
 #define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
 
@@ -673,12 +723,15 @@
  * SPRG usage:
  *
  * All 64-bit:
- *	- SPRG1 stores PACA pointer
+ *	- SPRG1 stores PACA pointer except 64-bit server in
+ *        HV mode in which case it is HSPRG0
  *
  * 64-bit server:
  *	- SPRG0 unused (reserved for HV on Power4)
  *	- SPRG2 scratch for exception vectors
  *	- SPRG3 unused (user visible)
+ *      - HSPRG0 stores PACA in HV mode
+ *      - HSPRG1 scratch for "HV" exceptions
  *
  * 64-bit embedded
  *	- SPRG0 generic exception scratch
@@ -741,6 +794,41 @@
 
 #ifdef CONFIG_PPC_BOOK3S_64
 #define SPRN_SPRG_SCRATCH0	SPRN_SPRG2
+#define SPRN_SPRG_HPACA		SPRN_HSPRG0
+#define SPRN_SPRG_HSCRATCH0	SPRN_HSPRG1
+
+#define GET_PACA(rX)					\
+	BEGIN_FTR_SECTION_NESTED(66);			\
+	mfspr	rX,SPRN_SPRG_PACA;			\
+	FTR_SECTION_ELSE_NESTED(66);			\
+	mfspr	rX,SPRN_SPRG_HPACA;			\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define SET_PACA(rX)					\
+	BEGIN_FTR_SECTION_NESTED(66);			\
+	mtspr	SPRN_SPRG_PACA,rX;			\
+	FTR_SECTION_ELSE_NESTED(66);			\
+	mtspr	SPRN_SPRG_HPACA,rX;			\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define GET_SCRATCH0(rX)				\
+	BEGIN_FTR_SECTION_NESTED(66);			\
+	mfspr	rX,SPRN_SPRG_SCRATCH0;			\
+	FTR_SECTION_ELSE_NESTED(66);			\
+	mfspr	rX,SPRN_SPRG_HSCRATCH0;			\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#define SET_SCRATCH0(rX)				\
+	BEGIN_FTR_SECTION_NESTED(66);			\
+	mtspr	SPRN_SPRG_SCRATCH0,rX;			\
+	FTR_SECTION_ELSE_NESTED(66);			\
+	mtspr	SPRN_SPRG_HSCRATCH0,rX;			\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE_206, 66)
+
+#else /* CONFIG_PPC_BOOK3S_64 */
+#define GET_SCRATCH0(rX)	mfspr	rX,SPRN_SPRG_SCRATCH0
+#define SET_SCRATCH0(rX)	mtspr	SPRN_SPRG_SCRATCH0,rX
+
 #endif
 
 #ifdef CONFIG_PPC_BOOK3E_64
@@ -750,6 +838,10 @@
 #define SPRN_SPRG_TLB_EXFRAME	SPRN_SPRG2
 #define SPRN_SPRG_TLB_SCRATCH	SPRN_SPRG6
 #define SPRN_SPRG_GEN_SCRATCH	SPRN_SPRG0
+
+#define SET_PACA(rX)	mtspr	SPRN_SPRG_PACA,rX
+#define GET_PACA(rX)	mfspr	rX,SPRN_SPRG_PACA
+
 #endif
 
 #ifdef CONFIG_PPC_BOOK3S_32
@@ -800,6 +892,8 @@
 #define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
 #endif
 
+
+
 /*
  * An mtfsf instruction with the L bit set. On CPUs that support this a
  * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
@@ -894,6 +988,8 @@
 #define PV_POWER5p	0x003B
 #define PV_POWER7	0x003F
 #define PV_970FX	0x003C
+#define PV_POWER6	0x003E
+#define PV_POWER7	0x003F
 #define PV_630		0x0040
 #define PV_630p	0x0041
 #define PV_970MP	0x0044
diff --git a/arch/powerpc/include/asm/reg_a2.h b/arch/powerpc/include/asm/reg_a2.h
new file mode 100644
index 00000000000..3d52a1132f3
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_a2.h
@@ -0,0 +1,165 @@
+/*
+ *  Register definitions specific to the A2 core
+ *
+ *  Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_REG_A2_H__
+#define __ASM_POWERPC_REG_A2_H__
+
+#define SPRN_TENSR	0x1b5
+#define SPRN_TENS	0x1b6	/* Thread ENable Set */
+#define SPRN_TENC	0x1b7	/* Thread ENable Clear */
+
+#define SPRN_A2_CCR0	0x3f0	/* Core Configuration Register 0 */
+#define SPRN_A2_CCR1	0x3f1	/* Core Configuration Register 1 */
+#define SPRN_A2_CCR2	0x3f2	/* Core Configuration Register 2 */
+#define SPRN_MMUCR0	0x3fc	/* MMU Control Register 0 */
+#define SPRN_MMUCR1	0x3fd	/* MMU Control Register 1 */
+#define SPRN_MMUCR2	0x3fe	/* MMU Control Register 2 */
+#define SPRN_MMUCR3	0x3ff	/* MMU Control Register 3 */
+
+#define SPRN_IAR	0x372
+
+#define SPRN_IUCR0	0x3f3
+#define IUCR0_ICBI_ACK	0x1000
+
+#define SPRN_XUCR0	0x3f6	/* Execution Unit Config Register 0 */
+
+#define A2_IERAT_SIZE	16
+#define A2_DERAT_SIZE	32
+
+/* A2 MMUCR0 bits */
+#define MMUCR0_ECL	0x80000000	/* Extended Class for TLB fills */
+#define MMUCR0_TID_NZ	0x40000000	/* TID is non-zero */
+#define MMUCR0_TS	0x10000000	/* Translation space for TLB fills */
+#define MMUCR0_TGS	0x20000000	/* Guest space for TLB fills */
+#define MMUCR0_TLBSEL	0x0c000000	/* TLB or ERAT target for TLB fills */
+#define MMUCR0_TLBSEL_U	0x00000000	/*  TLBSEL = UTLB */
+#define MMUCR0_TLBSEL_I	0x08000000	/*  TLBSEL = I-ERAT */
+#define MMUCR0_TLBSEL_D	0x0c000000	/*  TLBSEL = D-ERAT */
+#define MMUCR0_LOCKSRSH	0x02000000	/* Use TLB lock on tlbsx. */
+#define MMUCR0_TID_MASK	0x000000ff	/* TID field */
+
+/* A2 MMUCR1 bits */
+#define MMUCR1_IRRE		0x80000000	/* I-ERAT round robin enable */
+#define MMUCR1_DRRE		0x40000000	/* D-ERAT round robin enable */
+#define MMUCR1_REE		0x20000000	/* Reference Exception Enable*/
+#define MMUCR1_CEE		0x10000000	/* Change exception enable */
+#define MMUCR1_CSINV_ALL	0x00000000	/* Inval ERAT on all CS evts */
+#define MMUCR1_CSINV_NISYNC	0x04000000	/* Inval ERAT on all ex isync*/
+#define MMUCR1_CSINV_NEVER	0x0c000000	/* Don't inval ERAT on CS */
+#define MMUCR1_ICTID		0x00080000	/* IERAT class field as TID */
+#define MMUCR1_ITTID		0x00040000	/* IERAT thdid field as TID */
+#define MMUCR1_DCTID		0x00020000	/* DERAT class field as TID */
+#define MMUCR1_DTTID		0x00010000	/* DERAT thdid field as TID */
+#define MMUCR1_DCCD		0x00008000	/* DERAT class ignore */
+#define MMUCR1_TLBWE_BINV	0x00004000	/* back invalidate on tlbwe */
+
+/* A2 MMUCR2 bits */
+#define MMUCR2_PSSEL_SHIFT	4
+
+/* A2 MMUCR3 bits */
+#define MMUCR3_THID		0x0000000f	/* Thread ID */
+
+/* *** ERAT TLB bits definitions */
+#define TLB0_EPN_MASK		ASM_CONST(0xfffffffffffff000)
+#define TLB0_CLASS_MASK		ASM_CONST(0x0000000000000c00)
+#define TLB0_CLASS_00		ASM_CONST(0x0000000000000000)
+#define TLB0_CLASS_01		ASM_CONST(0x0000000000000400)
+#define TLB0_CLASS_10		ASM_CONST(0x0000000000000800)
+#define TLB0_CLASS_11		ASM_CONST(0x0000000000000c00)
+#define TLB0_V			ASM_CONST(0x0000000000000200)
+#define TLB0_X			ASM_CONST(0x0000000000000100)
+#define TLB0_SIZE_MASK		ASM_CONST(0x00000000000000f0)
+#define TLB0_SIZE_4K		ASM_CONST(0x0000000000000010)
+#define TLB0_SIZE_64K		ASM_CONST(0x0000000000000030)
+#define TLB0_SIZE_1M		ASM_CONST(0x0000000000000050)
+#define TLB0_SIZE_16M		ASM_CONST(0x0000000000000070)
+#define TLB0_SIZE_1G		ASM_CONST(0x00000000000000a0)
+#define TLB0_THDID_MASK		ASM_CONST(0x000000000000000f)
+#define TLB0_THDID_0		ASM_CONST(0x0000000000000001)
+#define TLB0_THDID_1		ASM_CONST(0x0000000000000002)
+#define TLB0_THDID_2		ASM_CONST(0x0000000000000004)
+#define TLB0_THDID_3		ASM_CONST(0x0000000000000008)
+#define TLB0_THDID_ALL		ASM_CONST(0x000000000000000f)
+
+#define TLB1_RESVATTR		ASM_CONST(0x00f0000000000000)
+#define TLB1_U0			ASM_CONST(0x0008000000000000)
+#define TLB1_U1			ASM_CONST(0x0004000000000000)
+#define TLB1_U2			ASM_CONST(0x0002000000000000)
+#define TLB1_U3			ASM_CONST(0x0001000000000000)
+#define TLB1_R			ASM_CONST(0x0000800000000000)
+#define TLB1_C			ASM_CONST(0x0000400000000000)
+#define TLB1_RPN_MASK		ASM_CONST(0x000003fffffff000)
+#define TLB1_W			ASM_CONST(0x0000000000000800)
+#define TLB1_I			ASM_CONST(0x0000000000000400)
+#define TLB1_M			ASM_CONST(0x0000000000000200)
+#define TLB1_G			ASM_CONST(0x0000000000000100)
+#define TLB1_E			ASM_CONST(0x0000000000000080)
+#define TLB1_VF			ASM_CONST(0x0000000000000040)
+#define TLB1_UX			ASM_CONST(0x0000000000000020)
+#define TLB1_SX			ASM_CONST(0x0000000000000010)
+#define TLB1_UW			ASM_CONST(0x0000000000000008)
+#define TLB1_SW			ASM_CONST(0x0000000000000004)
+#define TLB1_UR			ASM_CONST(0x0000000000000002)
+#define TLB1_SR			ASM_CONST(0x0000000000000001)
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
+#define WSP_UART_PHYS	0xffc000c000
+/* This needs to be careful chosen to hit a !0 congruence class
+ * in the TLB since we bolt it in way 3, which is already occupied
+ * by our linear mapping primary bolted entry in CC 0.
+ */
+#define WSP_UART_VIRT	0xf000000000001000
+#endif
+
+/* A2 erativax attributes definitions */
+#define ERATIVAX_RS_IS_ALL		0x000
+#define ERATIVAX_RS_IS_TID		0x040
+#define ERATIVAX_RS_IS_CLASS		0x080
+#define ERATIVAX_RS_IS_FULLMATCH	0x0c0
+#define ERATIVAX_CLASS_00		0x000
+#define ERATIVAX_CLASS_01		0x010
+#define ERATIVAX_CLASS_10		0x020
+#define ERATIVAX_CLASS_11		0x030
+#define ERATIVAX_PSIZE_4K		(TLB_PSIZE_4K >> 1)
+#define ERATIVAX_PSIZE_64K		(TLB_PSIZE_64K >> 1)
+#define ERATIVAX_PSIZE_1M		(TLB_PSIZE_1M >> 1)
+#define ERATIVAX_PSIZE_16M		(TLB_PSIZE_16M >> 1)
+#define ERATIVAX_PSIZE_1G		(TLB_PSIZE_1G >> 1)
+
+/* A2 eratilx attributes definitions */
+#define ERATILX_T_ALL			0
+#define ERATILX_T_TID			1
+#define ERATILX_T_TGS			2
+#define ERATILX_T_FULLMATCH		3
+#define ERATILX_T_CLASS0		4
+#define ERATILX_T_CLASS1		5
+#define ERATILX_T_CLASS2		6
+#define ERATILX_T_CLASS3		7
+
+/* XUCR0 bits */
+#define XUCR0_TRACE_UM_T0		0x40000000	/* Thread 0 */
+#define XUCR0_TRACE_UM_T1		0x20000000	/* Thread 1 */
+#define XUCR0_TRACE_UM_T2		0x10000000	/* Thread 2 */
+#define XUCR0_TRACE_UM_T3		0x08000000	/* Thread 3 */
+
+/* A2 CCR0 register */
+#define A2_CCR0_PME_DISABLED		0x00000000
+#define A2_CCR0_PME_SLEEP		0x40000000
+#define A2_CCR0_PME_RVW			0x80000000
+#define A2_CCR0_PME_DISABLED2		0xc0000000
+
+/* A2 CCR2 register */
+#define A2_CCR2_ERAT_ONLY_MODE		0x00000001
+#define A2_CCR2_ENABLE_ICSWX		0x00000002
+#define A2_CCR2_ENABLE_PC		0x20000000
+#define A2_CCR2_ENABLE_TRACE		0x40000000
+
+#endif /* __ASM_POWERPC_REG_A2_H__ */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 86ad8128963..0f0ad9fa01c 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -2,7 +2,7 @@
  * Contains register definitions common to the Book E PowerPC
  * specification.  Notice that while the IBM-40x series of CPUs
  * are not true Book E PowerPCs, they borrowed a number of features
- * before Book E was finalized, and are included here as well.  Unfortunatly,
+ * before Book E was finalized, and are included here as well.  Unfortunately,
  * they sometimes used different locations than true Book E CPUs did.
  *
  * This program is free software; you can redistribute it and/or
@@ -27,10 +27,12 @@
 #define MSR_CM		(1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */
 
 #if defined(CONFIG_PPC_BOOK3E_64)
+#define MSR_64BIT	MSR_CM
+
 #define MSR_		MSR_ME | MSR_CE
-#define MSR_KERNEL      MSR_ | MSR_CM
+#define MSR_KERNEL	MSR_ | MSR_64BIT
 #define MSR_USER32	MSR_ | MSR_PR | MSR_EE | MSR_DE
-#define MSR_USER64	MSR_USER32 | MSR_CM | MSR_DE
+#define MSR_USER64	MSR_USER32 | MSR_64BIT
 #elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
@@ -81,6 +83,10 @@
 #define SPRN_IVOR13	0x19D	/* Interrupt Vector Offset Register 13 */
 #define SPRN_IVOR14	0x19E	/* Interrupt Vector Offset Register 14 */
 #define SPRN_IVOR15	0x19F	/* Interrupt Vector Offset Register 15 */
+#define SPRN_IVOR38	0x1B0	/* Interrupt Vector Offset Register 38 */
+#define SPRN_IVOR39	0x1B1	/* Interrupt Vector Offset Register 39 */
+#define SPRN_IVOR40	0x1B2	/* Interrupt Vector Offset Register 40 */
+#define SPRN_IVOR41	0x1B3	/* Interrupt Vector Offset Register 41 */
 #define SPRN_SPEFSCR	0x200	/* SPE & Embedded FP Status & Control */
 #define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
 #define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */
@@ -110,7 +116,7 @@
 #define SPRN_MAS2	0x272	/* MMU Assist Register 2 */
 #define SPRN_MAS3	0x273	/* MMU Assist Register 3 */
 #define SPRN_MAS4	0x274	/* MMU Assist Register 4 */
-#define SPRN_MAS5	0x275	/* MMU Assist Register 5 */
+#define SPRN_MAS5	0x153	/* MMU Assist Register 5 */
 #define SPRN_MAS6	0x276	/* MMU Assist Register 6 */
 #define SPRN_PID1	0x279	/* Process ID Register 1 */
 #define SPRN_PID2	0x27A	/* Process ID Register 2 */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 9a1193e30f2..58625d1e780 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -158,7 +158,50 @@ struct rtas_error_log {
 	unsigned long target:4;			/* Target of failed operation */
 	unsigned long type:8;			/* General event or error*/
 	unsigned long extended_log_length:32;	/* length in bytes */
-	unsigned char buffer[1];
+	unsigned char buffer[1];		/* Start of extended log */
+						/* Variable length.      */
+};
+
+#define RTAS_V6EXT_LOG_FORMAT_EVENT_LOG	14
+
+#define RTAS_V6EXT_COMPANY_ID_IBM	(('I' << 24) | ('B' << 16) | ('M' << 8))
+
+/* RTAS general extended event log, Version 6. The extended log starts
+ * from "buffer" field of struct rtas_error_log defined above.
+ */
+struct rtas_ext_event_log_v6 {
+	/* Byte 0 */
+	uint32_t log_valid:1;		/* 1:Log valid */
+	uint32_t unrecoverable_error:1;	/* 1:Unrecoverable error */
+	uint32_t recoverable_error:1;	/* 1:recoverable (correctable	*/
+					/*   or successfully retried)	*/
+	uint32_t degraded_operation:1;	/* 1:Unrecoverable err, bypassed*/
+					/*   - degraded operation (e.g.	*/
+					/*   CPU or mem taken off-line)	*/
+	uint32_t predictive_error:1;
+	uint32_t new_log:1;		/* 1:"New" log (Always 1 for	*/
+					/*   data returned from RTAS	*/
+	uint32_t big_endian:1;		/* 1: Big endian */
+	uint32_t :1;			/* reserved */
+	/* Byte 1 */
+	uint32_t :8;			/* reserved */
+	/* Byte 2 */
+	uint32_t powerpc_format:1;	/* Set to 1 (indicating log is	*/
+					/* in PowerPC format		*/
+	uint32_t :3;			/* reserved */
+	uint32_t log_format:4;		/* Log format indicator. Define	*/
+					/* format used for byte 12-2047	*/
+	/* Byte 3 */
+	uint32_t :8;			/* reserved */
+	/* Byte 4-11 */
+	uint8_t reserved[8];		/* reserved */
+	/* Byte 12-15 */
+	uint32_t company_id;		/* Company ID of the company	*/
+					/* that defines the format for	*/
+					/* the vendor specific log type	*/
+	/* Byte 16-end of log */
+	uint8_t vendor_log[1];		/* Start of vendor specific log	*/
+					/* Variable length.		*/
 };
 
 /*
diff --git a/arch/powerpc/include/asm/scom.h b/arch/powerpc/include/asm/scom.h
new file mode 100644
index 00000000000..0cabfd7bc2d
--- /dev/null
+++ b/arch/powerpc/include/asm/scom.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2010 Benjamin Herrenschmidt, IBM Corp
+ *                <benh@kernel.crashing.org>
+ *     and        David Gibson, IBM Corporation.
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_SCOM_H
+#define _ASM_POWERPC_SCOM_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_SCOM
+
+/*
+ * The SCOM bus is a sideband bus used for accessing various internal
+ * registers of the processor or the chipset. The implementation details
+ * differ between processors and platforms, and the access method as
+ * well.
+ *
+ * This API allows to "map" ranges of SCOM register numbers associated
+ * with a given SCOM controller. The later must be represented by a
+ * device node, though some implementations might support NULL if there
+ * is no possible ambiguity
+ *
+ * Then, scom_read/scom_write can be used to accesses registers inside
+ * that range. The argument passed is a register number relative to
+ * the beginning of the range mapped.
+ */
+
+typedef void *scom_map_t;
+
+/* Value for an invalid SCOM map */
+#define SCOM_MAP_INVALID	(NULL)
+
+/* The scom_controller data structure is what the platform passes
+ * to the core code in scom_init, it provides the actual implementation
+ * of all the SCOM functions
+ */
+struct scom_controller {
+	scom_map_t (*map)(struct device_node *ctrl_dev, u64 reg, u64 count);
+	void (*unmap)(scom_map_t map);
+
+	u64 (*read)(scom_map_t map, u32 reg);
+	void (*write)(scom_map_t map, u32 reg, u64 value);
+};
+
+extern const struct scom_controller *scom_controller;
+
+/**
+ * scom_init - Initialize the SCOM backend, called by the platform
+ * @controller: The platform SCOM controller
+ */
+static inline void scom_init(const struct scom_controller *controller)
+{
+	scom_controller = controller;
+}
+
+/**
+ * scom_map_ok - Test is a SCOM mapping is successful
+ * @map: The result of scom_map to test
+ */
+static inline int scom_map_ok(scom_map_t map)
+{
+	return map != SCOM_MAP_INVALID;
+}
+
+/**
+ * scom_map - Map a block of SCOM registers
+ * @ctrl_dev: Device node of the SCOM controller
+ *            some implementations allow NULL here
+ * @reg: first SCOM register to map
+ * @count: Number of SCOM registers to map
+ */
+
+static inline scom_map_t scom_map(struct device_node *ctrl_dev,
+				  u64 reg, u64 count)
+{
+	return scom_controller->map(ctrl_dev, reg, count);
+}
+
+/**
+ * scom_find_parent - Find the SCOM controller for a device
+ * @dev: OF node of the device
+ *
+ * This is not meant for general usage, but in combination with
+ * scom_map() allows to map registers not represented by the
+ * device own scom-reg property. Useful for applying HW workarounds
+ * on things not properly represented in the device-tree for example.
+ */
+struct device_node *scom_find_parent(struct device_node *dev);
+
+
+/**
+ * scom_map_device - Map a device's block of SCOM registers
+ * @dev: OF node of the device
+ * @index: Register bank index (index in "scom-reg" property)
+ *
+ * This function will use the device-tree binding for SCOM which
+ * is to follow "scom-parent" properties until it finds a node with
+ * a "scom-controller" property to find the controller. It will then
+ * use the "scom-reg" property which is made of reg/count pairs,
+ * each of them having a size defined by the controller's #scom-cells
+ * property
+ */
+extern scom_map_t scom_map_device(struct device_node *dev, int index);
+
+
+/**
+ * scom_unmap - Unmap a block of SCOM registers
+ * @map: Result of scom_map is to be unmapped
+ */
+static inline void scom_unmap(scom_map_t map)
+{
+	if (scom_map_ok(map))
+		scom_controller->unmap(map);
+}
+
+/**
+ * scom_read - Read a SCOM register
+ * @map: Result of scom_map
+ * @reg: Register index within that map
+ */
+static inline u64 scom_read(scom_map_t map, u32 reg)
+{
+	return scom_controller->read(map, reg);
+}
+
+/**
+ * scom_write - Write to a SCOM register
+ * @map: Result of scom_map
+ * @reg: Register index within that map
+ * @value: Value to write
+ */
+static inline void scom_write(scom_map_t map, u32 reg, u64 value)
+{
+	scom_controller->write(map, reg, value);
+}
+
+#endif /* CONFIG_PPC_SCOM */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SCOM_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 66e237bbe15..880b8c1e6e5 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -20,6 +20,7 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/kernel.h>
+#include <linux/irqreturn.h>
 
 #ifndef __ASSEMBLY__
 
@@ -29,22 +30,41 @@
 #include <asm/percpu.h>
 
 extern int boot_cpuid;
+extern int boot_cpu_count;
 
 extern void cpu_die(void);
 
 #ifdef CONFIG_SMP
 
-extern void smp_send_debugger_break(int cpu);
-extern void smp_message_recv(int);
+struct smp_ops_t {
+	void  (*message_pass)(int cpu, int msg);
+#ifdef CONFIG_PPC_SMP_MUXED_IPI
+	void  (*cause_ipi)(int cpu, unsigned long data);
+#endif
+	int   (*probe)(void);
+	int   (*kick_cpu)(int nr);
+	void  (*setup_cpu)(int nr);
+	void  (*bringup_done)(void);
+	void  (*take_timebase)(void);
+	void  (*give_timebase)(void);
+	int   (*cpu_disable)(void);
+	void  (*cpu_die)(unsigned int nr);
+	int   (*cpu_bootable)(unsigned int nr);
+};
+
+extern void smp_send_debugger_break(void);
+extern void start_secondary_resume(void);
+extern void __devinit smp_generic_give_timebase(void);
+extern void __devinit smp_generic_take_timebase(void);
 
 DECLARE_PER_CPU(unsigned int, cpu_pvr);
 
 #ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(const struct cpumask *map);
+extern void migrate_irqs(void);
 int generic_cpu_disable(void);
-int generic_cpu_enable(unsigned int cpu);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
+void generic_set_cpu_dead(unsigned int cpu);
 #endif
 
 #ifdef CONFIG_PPC64
@@ -92,13 +112,16 @@ extern int cpu_to_core_id(int cpu);
 #define PPC_MSG_CALL_FUNC_SINGLE	2
 #define PPC_MSG_DEBUGGER_BREAK  3
 
-/*
- * irq controllers that have dedicated ipis per message and don't
- * need additional code in the action handler may use this
- */
+/* for irq controllers that have dedicated ipis per message (4) */
 extern int smp_request_message_ipi(int virq, int message);
 extern const char *smp_ipi_name[];
 
+/* for irq controllers with only a single ipi */
+extern void smp_muxed_ipi_set_data(int cpu, unsigned long data);
+extern void smp_muxed_ipi_message_pass(int cpu, int msg);
+extern void smp_muxed_ipi_resend(void);
+extern irqreturn_t smp_ipi_demux(void);
+
 void smp_init_iSeries(void);
 void smp_init_pSeries(void);
 void smp_init_cell(void);
@@ -148,7 +171,7 @@ extern int smt_enabled_at_boot;
 
 extern int smp_mpic_probe(void);
 extern void smp_mpic_setup_cpu(int cpu);
-extern void smp_generic_kick_cpu(int nr);
+extern int smp_generic_kick_cpu(int nr);
 
 extern void smp_generic_give_timebase(void);
 extern void smp_generic_take_timebase(void);
@@ -168,6 +191,8 @@ extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
 
+extern irqreturn_t debug_ipi_action(int irq, void *data);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h
index 25020a34ce7..d8f5c60f61c 100644
--- a/arch/powerpc/include/asm/spu_priv1.h
+++ b/arch/powerpc/include/asm/spu_priv1.h
@@ -223,7 +223,7 @@ spu_disable_spu (struct spu_context *ctx)
 }
 
 /*
- * The declarations folowing are put here for convenience
+ * The declarations following are put here for convenience
  * and only intended to be used by the platform setup code.
  */
 
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index aa0f1ebb4aa..8489d372077 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -348,3 +348,8 @@ COMPAT_SYS_SPU(sendmsg)
 COMPAT_SYS_SPU(recvmsg)
 COMPAT_SYS_SPU(recvmmsg)
 SYSCALL_SPU(accept4)
+SYSCALL_SPU(name_to_handle_at)
+COMPAT_SYS_SPU(open_by_handle_at)
+COMPAT_SYS_SPU(clock_adjtime)
+SYSCALL_SPU(syncfs)
+COMPAT_SYS_SPU(sendmmsg)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index 5e474ddd227..2dc595dda03 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -219,8 +219,6 @@ extern int mem_init_done;	/* set on boot once kmalloc can be called */
 extern int init_bootmem_done;	/* set once bootmem is available */
 extern phys_addr_t memory_limit;
 extern unsigned long klimit;
-
-extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
 extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index d50a380b2b6..81143fcbd11 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -79,6 +79,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 
 #elif defined(CONFIG_PPC_STD_MMU_64)
 
+#define MMU_NO_CONTEXT		0
+
 /*
  * TLB flushing for 64-bit hash-MMU CPUs
  */
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index 11ae699135b..58580e94a2b 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -52,6 +52,7 @@ extern void __init udbg_init_44x_as1(void);
 extern void __init udbg_init_40x_realmode(void);
 extern void __init udbg_init_cpm(void);
 extern void __init udbg_init_usbgecko(void);
+extern void __init udbg_init_wsp(void);
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_UDBG_H */
diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h
index f737732c386..d12b11d7641 100644
--- a/arch/powerpc/include/asm/uninorth.h
+++ b/arch/powerpc/include/asm/uninorth.h
@@ -60,7 +60,7 @@
  *
  * Obviously, the GART is not cache coherent and so any change to it
  * must be flushed to memory (or maybe just make the GART space non
- * cachable). AGP memory itself doens't seem to be cache coherent neither.
+ * cachable). AGP memory itself doesn't seem to be cache coherent neither.
  *
  * In order to invalidate the GART (which is probably necessary to inval
  * the bridge internal TLBs), the following sequence has to be written,
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 6151937657f..6d23c8193ca 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -367,10 +367,15 @@
 #define __NR_recvmsg		342
 #define __NR_recvmmsg		343
 #define __NR_accept4		344
+#define __NR_name_to_handle_at	345
+#define __NR_open_by_handle_at	346
+#define __NR_clock_adjtime	347
+#define __NR_syncfs		348
+#define __NR_sendmmsg		349
 
 #ifdef __KERNEL__
 
-#define __NR_syscalls		345
+#define __NR_syscalls		350
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index 25e39220e89..b73a8199f16 100644
--- a/arch/powerpc/include/asm/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -57,7 +57,7 @@ struct vdso_data {
 	} version;
 
 	/* Note about the platform flags: it now only contains the lpar
-	 * bit. The actual platform number is dead and burried
+	 * bit. The actual platform number is dead and buried
 	 */
 	__u32 platform;			/* Platform flags		0x18 */
 	__u32 processor;		/* Processor type		0x1C */
diff --git a/arch/powerpc/include/asm/wsp.h b/arch/powerpc/include/asm/wsp.h
new file mode 100644
index 00000000000..c7dc83088a3
--- /dev/null
+++ b/arch/powerpc/include/asm/wsp.h
@@ -0,0 +1,14 @@
+/*
+ *  Copyright 2011 Michael Ellerman, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_POWERPC_WSP_H
+#define __ASM_POWERPC_WSP_H
+
+extern int wsp_get_chip_id(struct device_node *dn);
+
+#endif /* __ASM_POWERPC_WSP_H */
diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h
new file mode 100644
index 00000000000..b183a406201
--- /dev/null
+++ b/arch/powerpc/include/asm/xics.h
@@ -0,0 +1,142 @@
+/*
+ * Common definitions accross all variants of ICP and ICS interrupt
+ * controllers.
+ */
+
+#ifndef _XICS_H
+#define _XICS_H
+
+#include <linux/interrupt.h>
+
+#define XICS_IPI		2
+#define XICS_IRQ_SPURIOUS	0
+
+/* Want a priority other than 0.  Various HW issues require this. */
+#define	DEFAULT_PRIORITY	5
+
+/*
+ * Mark IPIs as higher priority so we can take them inside interrupts that
+ * arent marked IRQF_DISABLED
+ */
+#define IPI_PRIORITY		4
+
+/* The least favored priority */
+#define LOWEST_PRIORITY		0xFF
+
+/* The number of priorities defined above */
+#define MAX_NUM_PRIORITIES	3
+
+/* Native ICP */
+extern int icp_native_init(void);
+
+/* PAPR ICP */
+extern int icp_hv_init(void);
+
+/* ICP ops */
+struct icp_ops {
+	unsigned int (*get_irq)(void);
+	void (*eoi)(struct irq_data *d);
+	void (*set_priority)(unsigned char prio);
+	void (*teardown_cpu)(void);
+	void (*flush_ipi)(void);
+#ifdef CONFIG_SMP
+	void (*cause_ipi)(int cpu, unsigned long data);
+	irq_handler_t ipi_action;
+#endif
+};
+
+extern const struct icp_ops *icp_ops;
+
+/* Native ICS */
+extern int ics_native_init(void);
+
+/* RTAS ICS */
+extern int ics_rtas_init(void);
+
+/* ICS instance, hooked up to chip_data of an irq */
+struct ics {
+	struct list_head link;
+	int (*map)(struct ics *ics, unsigned int virq);
+	void (*mask_unknown)(struct ics *ics, unsigned long vec);
+	long (*get_server)(struct ics *ics, unsigned long vec);
+	int (*host_match)(struct ics *ics, struct device_node *node);
+	char data[];
+};
+
+/* Commons */
+extern unsigned int xics_default_server;
+extern unsigned int xics_default_distrib_server;
+extern unsigned int xics_interrupt_server_size;
+extern struct irq_host *xics_host;
+
+struct xics_cppr {
+	unsigned char stack[MAX_NUM_PRIORITIES];
+	int index;
+};
+
+DECLARE_PER_CPU(struct xics_cppr, xics_cppr);
+
+static inline void xics_push_cppr(unsigned int vec)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1))
+		return;
+
+	if (vec == XICS_IPI)
+		os_cppr->stack[++os_cppr->index] = IPI_PRIORITY;
+	else
+		os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY;
+}
+
+static inline unsigned char xics_pop_cppr(void)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	if (WARN_ON(os_cppr->index < 1))
+		return LOWEST_PRIORITY;
+
+	return os_cppr->stack[--os_cppr->index];
+}
+
+static inline void xics_set_base_cppr(unsigned char cppr)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	/* we only really want to set the priority when there's
+	 * just one cppr value on the stack
+	 */
+	WARN_ON(os_cppr->index != 0);
+
+	os_cppr->stack[0] = cppr;
+}
+
+static inline unsigned char xics_cppr_top(void)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+	
+	return os_cppr->stack[os_cppr->index];
+}
+
+DECLARE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message);
+
+extern void xics_init(void);
+extern void xics_setup_cpu(void);
+extern void xics_update_irq_servers(void);
+extern void xics_set_cpu_giq(unsigned int gserver, unsigned int join);
+extern void xics_mask_unknown_vec(unsigned int vec);
+extern irqreturn_t xics_ipi_dispatch(int cpu);
+extern int xics_smp_probe(void);
+extern void xics_register_ics(struct ics *ics);
+extern void xics_teardown_cpu(void);
+extern void xics_kexec_teardown_cpu(int secondary);
+extern void xics_migrate_irqs_away(void);
+#ifdef CONFIG_SMP
+extern int xics_get_irq_server(unsigned int virq, const struct cpumask *cpumask,
+			       unsigned int strict_check);
+#else
+#define xics_get_irq_server(virq, cpumask, strict_check) (xics_default_server)
+#endif
+
+
+#endif /* _XICS_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 3bb2a3e6a33..9aab3631257 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -38,11 +38,14 @@ obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   paca.o nvram_64.o firmware.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
+obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power7.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
 obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
+obj-$(CONFIG_PPC_A2)		+= cpu_setup_a2.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
+obj-$(CONFIG_PPC_P7_NAP)	+= idle_power7.o
 obj-$(CONFIG_PPC_OF)		+= of_platform.o prom_parse.o
 obj-$(CONFIG_PPC_CLOCK)		+= clock.o
 procfs-y			:= proc_powerpc.o
@@ -75,7 +78,6 @@ obj-$(CONFIG_PPC_FSL_BOOK3E)	+= cpu_setup_fsl_booke.o dbell.o
 obj-$(CONFIG_PPC_BOOK3E_64)	+= dbell.o
 
 extra-y				:= head_$(CONFIG_WORD_SIZE).o
-extra-$(CONFIG_PPC_BOOK3E_32)	:= head_new_booke.o
 extra-$(CONFIG_40x)		:= head_40x.o
 extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
@@ -103,6 +105,8 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o \
 obj-$(CONFIG_AUDIT)		+= audit.o
 obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
+obj-$(CONFIG_PPC_IO_WORKAROUNDS)	+= io-workarounds.o
+
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 23e6a93145a..6887661ac07 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -74,6 +74,7 @@ int main(void)
 	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
+	DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 625942ae558..60b3e377b1e 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -99,7 +99,7 @@ void __init btext_prepare_BAT(void)
 
 /* This function can be used to enable the early boot text when doing
  * OF booting or within bootx init. It must be followed by a btext_unmap()
- * call before the logical address becomes unuseable
+ * call before the logical address becomes unusable
  */
 void __init btext_setup_display(int width, int height, int depth, int pitch,
 				unsigned long address)
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
new file mode 100644
index 00000000000..7f818feaa7a
--- /dev/null
+++ b/arch/powerpc/kernel/cpu_setup_a2.S
@@ -0,0 +1,114 @@
+/*
+ *  A2 specific assembly support code
+ *
+ *  Copyright 2009 Ben Herrenschmidt, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/ppc_asm.h>
+#include <asm/ppc-opcode.h>
+#include <asm/processor.h>
+#include <asm/reg_a2.h>
+#include <asm/reg.h>
+#include <asm/thread_info.h>
+
+/*
+ * Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity.
+ * This also prevents external LPID accesses but that isn't a problem when not a
+ * guest. Under PV, this setting will be ignored and MMUCR will return the right
+ * number of PID bits we can use.
+ */
+#define MMUCR1_EXTEND_PID \
+	(MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \
+	 MMUCR1_DTTID | MMUCR1_DCCD)
+
+/*
+ * Use extended PIDs if enabled.
+ * Don't clear the ERATs on context sync events and enable I & D LRU.
+ * Enable ERAT back invalidate when tlbwe overwrites an entry.
+ */
+#define INITIAL_MMUCR1 \
+	(MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \
+	 MMUCR1_DRRE | MMUCR1_TLBWE_BINV)
+
+_GLOBAL(__setup_cpu_a2)
+	/* Some of these are actually thread local and some are
+	 * core local but doing it always won't hurt
+	 */
+
+#ifdef CONFIG_PPC_WSP_COPRO
+	/* Make sure ACOP starts out as zero */
+	li	r3,0
+	mtspr   SPRN_ACOP,r3
+
+	/* Enable icswx instruction */
+	mfspr   r3,SPRN_A2_CCR2
+	ori     r3,r3,A2_CCR2_ENABLE_ICSWX
+	mtspr   SPRN_A2_CCR2,r3
+
+	/* Unmask all CTs in HACOP */
+	li      r3,-1
+	mtspr   SPRN_HACOP,r3
+#endif /* CONFIG_PPC_WSP_COPRO */
+
+	/* Enable doorbell */
+	mfspr   r3,SPRN_A2_CCR2
+	oris     r3,r3,A2_CCR2_ENABLE_PC@h
+	mtspr   SPRN_A2_CCR2,r3
+	isync
+
+	/* Setup CCR0 to disable power saving for now as it's busted
+	 * in the current implementations. Setup CCR1 to wake on
+	 * interrupts normally (we write the default value but who
+	 * knows what FW may have clobbered...)
+	 */
+	li	r3,0
+	mtspr	SPRN_A2_CCR0, r3
+	LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f)
+	mtspr	SPRN_A2_CCR1, r3
+
+	/* Initialise MMUCR1 */
+	lis	r3,INITIAL_MMUCR1@h
+	ori	r3,r3,INITIAL_MMUCR1@l
+	mtspr	SPRN_MMUCR1,r3
+
+	/* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
+	LOAD_REG_IMMEDIATE(r3, 0x000a7531)
+	mtspr	SPRN_MMUCR2,r3
+
+	/* Set MMUCR3 to write all thids bit to the TLB */
+	LOAD_REG_IMMEDIATE(r3, 0x0000000f)
+	mtspr	SPRN_MMUCR3,r3
+
+	/* Don't do ERAT stuff if running guest mode */
+	mfmsr	r3
+	andis.	r0,r3,MSR_GS@h
+	bne	1f
+
+	/* Now set the I-ERAT watermark to 15 */
+	lis	r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
+	mtspr	SPRN_MMUCR0, r4
+	li	r4,A2_IERAT_SIZE-1
+	PPC_ERATWE(r4,r4,3)
+
+	/* Now set the D-ERAT watermark to 31 */
+	lis	r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
+	mtspr	SPRN_MMUCR0, r4
+	li	r4,A2_DERAT_SIZE-1
+	PPC_ERATWE(r4,r4,3)
+
+	/* And invalidate the beast just in case. That won't get rid of
+	 * a bolted entry though it will be in LRU and so will go away eventually
+	 * but let's not bother for now
+	 */
+	PPC_ERATILX(0,0,0)
+1:
+	blr
+
+_GLOBAL(__restore_cpu_a2)
+	b	__setup_cpu_a2
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 913611105c1..8053db02b85 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -88,6 +88,9 @@ _GLOBAL(__setup_cpu_e5500)
 	bl	__e500_dcache_setup
 #ifdef CONFIG_PPC_BOOK3E_64
 	bl	.__setup_base_ivors
+	bl	.setup_perfmon_ivor
+	bl	.setup_doorbell_ivors
+	bl	.setup_ehv_ivors
 #else
 	bl	__setup_e500mc_ivors
 #endif
diff --git a/arch/powerpc/kernel/cpu_setup_power7.S b/arch/powerpc/kernel/cpu_setup_power7.S
new file mode 100644
index 00000000000..4f9a93fcfe0
--- /dev/null
+++ b/arch/powerpc/kernel/cpu_setup_power7.S
@@ -0,0 +1,91 @@
+/*
+ * This file contains low level CPU setup functions.
+ *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+
+/* Entry: r3 = crap, r4 = ptr to cputable entry
+ *
+ * Note that we can be called twice for pseudo-PVRs
+ */
+_GLOBAL(__setup_cpu_power7)
+	mflr	r11
+	bl	__init_hvmode_206
+	mtlr	r11
+	beqlr
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	bl	__init_LPCR
+	bl	__init_TLB
+	mtlr	r11
+	blr
+
+_GLOBAL(__restore_cpu_power7)
+	mflr	r11
+	mfmsr	r3
+	rldicl.	r0,r3,4,63
+	beqlr
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	bl	__init_LPCR
+	bl	__init_TLB
+	mtlr	r11
+	blr
+
+__init_hvmode_206:
+	/* Disable CPU_FTR_HVMODE_206 and exit if MSR:HV is not set */
+	mfmsr	r3
+	rldicl.	r0,r3,4,63
+	bnelr
+	ld	r5,CPU_SPEC_FEATURES(r4)
+	LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE_206)
+	xor	r5,r5,r6
+	std	r5,CPU_SPEC_FEATURES(r4)
+	blr
+
+__init_LPCR:
+	/* Setup a sane LPCR:
+	 *
+	 *   LPES = 0b01 (HSRR0/1 used for 0x500)
+	 *   PECE = 0b111
+	 *   DPFD = 4
+	 *
+	 * Other bits untouched for now
+	 */
+	mfspr	r3,SPRN_LPCR
+	ori	r3,r3,(LPCR_LPES0|LPCR_LPES1)
+	xori	r3,r3, LPCR_LPES0
+	ori	r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
+	li	r5,7
+	sldi	r5,r5,LPCR_DPFD_SH
+	andc	r3,r3,r5
+	li	r5,4
+	sldi	r5,r5,LPCR_DPFD_SH
+	or	r3,r3,r5
+	mtspr	SPRN_LPCR,r3
+	isync
+	blr
+
+__init_TLB:
+	/* Clear the TLB */
+	li	r6,128
+	mtctr	r6
+	li	r7,0xc00	/* IS field = 0b11 */
+	ptesync
+2:	tlbiel	r7
+	addi	r7,r7,0x1000
+	bdnz	2b
+	ptesync
+1:	blr
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index c9b68d07ac4..34d2722b945 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -62,10 +62,12 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_a2(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_pa6t(void);
 extern void __restore_cpu_ppc970(void);
 extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_power7(void);
+extern void __restore_cpu_a2(void);
 #endif /* CONFIG_PPC64 */
 #if defined(CONFIG_E500)
 extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec);
@@ -199,7 +201,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER4 (gp)",
 		.cpu_features		= CPU_FTRS_POWER4,
 		.cpu_user_features	= COMMON_USER_POWER4,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER4,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -214,7 +216,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER4+ (gq)",
 		.cpu_features		= CPU_FTRS_POWER4,
 		.cpu_user_features	= COMMON_USER_POWER4,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER4,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -230,7 +232,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -248,7 +250,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -284,7 +286,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -302,7 +304,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
@@ -318,7 +320,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER5 (gr)",
 		.cpu_features		= CPU_FTRS_POWER5,
 		.cpu_user_features	= COMMON_USER_POWER5,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -338,7 +340,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER5+ (gs)",
 		.cpu_features		= CPU_FTRS_POWER5,
 		.cpu_user_features	= COMMON_USER_POWER5_PLUS,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -354,7 +356,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER5+ (gs)",
 		.cpu_features		= CPU_FTRS_POWER5,
 		.cpu_user_features	= COMMON_USER_POWER5_PLUS,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -371,7 +373,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER5+",
 		.cpu_features		= CPU_FTRS_POWER5,
 		.cpu_user_features	= COMMON_USER_POWER5_PLUS,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER5,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
@@ -385,7 +387,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_POWER6,
 		.cpu_user_features	= COMMON_USER_POWER6 |
 			PPC_FEATURE_POWER6_EXT,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER6,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -404,7 +406,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER6 (architected)",
 		.cpu_features		= CPU_FTRS_POWER6,
 		.cpu_user_features	= COMMON_USER_POWER6,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_POWER6,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
@@ -417,12 +419,13 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7 (architected)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE |
-			MMU_FTR_TLBIE_206,
+		.mmu_features		= MMU_FTRS_POWER7,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7",
 	},
 	{	/* Power7 */
@@ -431,14 +434,15 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7 (raw)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE |
-			MMU_FTR_TLBIE_206,
+		.mmu_features		= MMU_FTRS_POWER7,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power7",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7",
 	},
 	{	/* Power7+ */
@@ -447,14 +451,15 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7+ (raw)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE |
-			MMU_FTR_TLBIE_206,
+		.mmu_features		= MMU_FTRS_POWER7,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power7",
 		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7+",
 	},
 	{	/* Cell Broadband Engine */
@@ -465,7 +470,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_user_features	= COMMON_USER_PPC64 |
 			PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP |
 			PPC_FEATURE_SMT,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_CELL,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 4,
@@ -480,7 +485,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "PA6T",
 		.cpu_features		= CPU_FTRS_PA6T,
 		.cpu_user_features	= COMMON_USER_PA6T,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PA6T,
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 6,
@@ -497,7 +502,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER4 (compatible)",
 		.cpu_features		= CPU_FTRS_COMPATIBLE,
 		.cpu_user_features	= COMMON_USER_PPC64,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_DEFAULT_HPTE_ARCH_V2,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
@@ -1973,7 +1978,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80240000,
 		.cpu_name		= "e5500",
-		.cpu_features		= CPU_FTRS_E500MC,
+		.cpu_features		= CPU_FTRS_E5500,
 		.cpu_user_features	= COMMON_USER_BOOKE,
 		.mmu_features		= MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
 			MMU_FTR_USE_TLBILX,
@@ -2005,7 +2010,22 @@ static struct cpu_spec __initdata cpu_specs[] = {
 #endif /* CONFIG_PPC32 */
 #endif /* CONFIG_E500 */
 
-#ifdef CONFIG_PPC_BOOK3E_64
+#ifdef CONFIG_PPC_A2
+	{	/* Standard A2 (>= DD2) + FPU core */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00480000,
+		.cpu_name		= "A2 (>= DD2)",
+		.cpu_features		= CPU_FTRS_A2,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.mmu_features		= MMU_FTRS_A2,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 0,
+		.cpu_setup		= __setup_cpu_a2,
+		.cpu_restore		= __restore_cpu_a2,
+		.machine_check		= machine_check_generic,
+		.platform		= "ppca2",
+	},
 	{	/* This is a default entry to get going, to be replaced by
 		 * a real one at some stage
 		 */
@@ -2026,7 +2046,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "power6",
 	},
-#endif
+#endif /* CONFIG_PPC_A2 */
 };
 
 static struct cpu_spec the_cpu_spec;
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 3d569e2aff1..4e6ee944495 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -64,9 +64,9 @@ void crash_ipi_callback(struct pt_regs *regs)
 		return;
 
 	hard_irq_disable();
-	if (!cpu_isset(cpu, cpus_in_crash))
+	if (!cpumask_test_cpu(cpu, &cpus_in_crash))
 		crash_save_cpu(regs, cpu);
-	cpu_set(cpu, cpus_in_crash);
+	cpumask_set_cpu(cpu, &cpus_in_crash);
 
 	/*
 	 * Entered via soft-reset - could be the kdump
@@ -77,8 +77,8 @@ void crash_ipi_callback(struct pt_regs *regs)
 	 * Tell the kexec CPU that entered via soft-reset and ready
 	 * to go down.
 	 */
-	if (cpu_isset(cpu, cpus_in_sr)) {
-		cpu_clear(cpu, cpus_in_sr);
+	if (cpumask_test_cpu(cpu, &cpus_in_sr)) {
+		cpumask_clear_cpu(cpu, &cpus_in_sr);
 		atomic_inc(&enter_on_soft_reset);
 	}
 
@@ -87,7 +87,7 @@ void crash_ipi_callback(struct pt_regs *regs)
 	 * This barrier is needed to make sure that all CPUs are stopped.
 	 * If not, soft-reset will be invoked to bring other CPUs.
 	 */
-	while (!cpu_isset(crashing_cpu, cpus_in_crash))
+	while (!cpumask_test_cpu(crashing_cpu, &cpus_in_crash))
 		cpu_relax();
 
 	if (ppc_md.kexec_cpu_down)
@@ -109,7 +109,7 @@ static void crash_soft_reset_check(int cpu)
 {
 	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
 
-	cpu_clear(cpu, cpus_in_sr);
+	cpumask_clear_cpu(cpu, &cpus_in_sr);
 	while (atomic_read(&enter_on_soft_reset) != ncpus)
 		cpu_relax();
 }
@@ -132,7 +132,7 @@ static void crash_kexec_prepare_cpus(int cpu)
 	 */
 	printk(KERN_EMERG "Sending IPI to other cpus...\n");
 	msecs = 10000;
-	while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
+	while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) {
 		cpu_relax();
 		mdelay(1);
 	}
@@ -144,52 +144,24 @@ static void crash_kexec_prepare_cpus(int cpu)
 	 * user to do soft reset such that we get all.
 	 * Soft-reset will be used until better mechanism is implemented.
 	 */
-	if (cpus_weight(cpus_in_crash) < ncpus) {
+	if (cpumask_weight(&cpus_in_crash) < ncpus) {
 		printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",
-			ncpus - cpus_weight(cpus_in_crash));
+			ncpus - cpumask_weight(&cpus_in_crash));
 		printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");
-		cpus_in_sr = CPU_MASK_NONE;
+		cpumask_clear(&cpus_in_sr);
 		atomic_set(&enter_on_soft_reset, 0);
-		while (cpus_weight(cpus_in_crash) < ncpus)
+		while (cpumask_weight(&cpus_in_crash) < ncpus)
 			cpu_relax();
 	}
 	/*
 	 * Make sure all CPUs are entered via soft-reset if the kdump is
 	 * invoked using soft-reset.
 	 */
-	if (cpu_isset(cpu, cpus_in_sr))
+	if (cpumask_test_cpu(cpu, &cpus_in_sr))
 		crash_soft_reset_check(cpu);
 	/* Leave the IPI callback set */
 }
 
-/* wait for all the CPUs to hit real mode but timeout if they don't come in */
-#ifdef CONFIG_PPC_STD_MMU_64
-static void crash_kexec_wait_realmode(int cpu)
-{
-	unsigned int msecs;
-	int i;
-
-	msecs = 10000;
-	for (i=0; i < NR_CPUS && msecs > 0; i++) {
-		if (i == cpu)
-			continue;
-
-		while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
-			barrier();
-			if (!cpu_possible(i)) {
-				break;
-			}
-			if (!cpu_online(i)) {
-				break;
-			}
-			msecs--;
-			mdelay(1);
-		}
-	}
-	mb();
-}
-#endif
-
 /*
  * This function will be called by secondary cpus or by kexec cpu
  * if soft-reset is activated to stop some CPUs.
@@ -210,7 +182,7 @@ void crash_kexec_secondary(struct pt_regs *regs)
 			 * exited using 'x'(exit and recover) or
 			 * kexec_should_crash() failed for all running tasks.
 			 */
-			cpu_clear(cpu, cpus_in_sr);
+			cpumask_clear_cpu(cpu, &cpus_in_sr);
 			local_irq_restore(flags);
 			return;
 		}
@@ -224,7 +196,7 @@ void crash_kexec_secondary(struct pt_regs *regs)
 		 * then start kexec boot.
 		 */
 		crash_soft_reset_check(cpu);
-		cpu_set(crashing_cpu, cpus_in_crash);
+		cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
 		if (ppc_md.kexec_cpu_down)
 			ppc_md.kexec_cpu_down(1, 0);
 		machine_kexec(kexec_crash_image);
@@ -233,7 +205,8 @@ void crash_kexec_secondary(struct pt_regs *regs)
 	crash_ipi_callback(regs);
 }
 
-#else
+#else	/* ! CONFIG_SMP */
+
 static void crash_kexec_prepare_cpus(int cpu)
 {
 	/*
@@ -251,9 +224,39 @@ static void crash_kexec_prepare_cpus(int cpu)
 
 void crash_kexec_secondary(struct pt_regs *regs)
 {
-	cpus_in_sr = CPU_MASK_NONE;
+	cpumask_clear(&cpus_in_sr);
 }
-#endif
+#endif	/* CONFIG_SMP */
+
+/* wait for all the CPUs to hit real mode but timeout if they don't come in */
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC_STD_MMU_64)
+static void crash_kexec_wait_realmode(int cpu)
+{
+	unsigned int msecs;
+	int i;
+
+	msecs = 10000;
+	for (i=0; i < nr_cpu_ids && msecs > 0; i++) {
+		if (i == cpu)
+			continue;
+
+		while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
+			barrier();
+			if (!cpu_possible(i)) {
+				break;
+			}
+			if (!cpu_online(i)) {
+				break;
+			}
+			msecs--;
+			mdelay(1);
+		}
+	}
+	mb();
+}
+#else
+static inline void crash_kexec_wait_realmode(int cpu) {}
+#endif	/* CONFIG_SMP && CONFIG_PPC_STD_MMU_64 */
 
 /*
  * Register a function to be called on shutdown.  Only use this if you
@@ -343,10 +346,8 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	crashing_cpu = smp_processor_id();
 	crash_save_cpu(regs, crashing_cpu);
 	crash_kexec_prepare_cpus(crashing_cpu);
-	cpu_set(crashing_cpu, cpus_in_crash);
-#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
+	cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
 	crash_kexec_wait_realmode(crashing_cpu);
-#endif
 
 	machine_kexec_mask_interrupts();
 
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index 3307a52d797..2cc451aaaca 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -13,84 +13,35 @@
 #include <linux/kernel.h>
 #include <linux/smp.h>
 #include <linux/threads.h>
-#include <linux/percpu.h>
+#include <linux/hardirq.h>
 
 #include <asm/dbell.h>
 #include <asm/irq_regs.h>
 
 #ifdef CONFIG_SMP
-struct doorbell_cpu_info {
-	unsigned long	messages;	/* current messages bits */
-	unsigned int	tag;		/* tag value */
-};
-
-static DEFINE_PER_CPU(struct doorbell_cpu_info, doorbell_cpu_info);
-
 void doorbell_setup_this_cpu(void)
 {
-	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
+	unsigned long tag = mfspr(SPRN_PIR) & 0x3fff;
 
-	info->messages = 0;
-	info->tag = mfspr(SPRN_PIR) & 0x3fff;
+	smp_muxed_ipi_set_data(smp_processor_id(), tag);
 }
 
-void doorbell_message_pass(int target, int msg)
+void doorbell_cause_ipi(int cpu, unsigned long data)
 {
-	struct doorbell_cpu_info *info;
-	int i;
-
-	if (target < NR_CPUS) {
-		info = &per_cpu(doorbell_cpu_info, target);
-		set_bit(msg, &info->messages);
-		ppc_msgsnd(PPC_DBELL, 0, info->tag);
-	}
-	else if (target == MSG_ALL_BUT_SELF) {
-		for_each_online_cpu(i) {
-			if (i == smp_processor_id())
-				continue;
-			info = &per_cpu(doorbell_cpu_info, i);
-			set_bit(msg, &info->messages);
-			ppc_msgsnd(PPC_DBELL, 0, info->tag);
-		}
-	}
-	else { /* target == MSG_ALL */
-		for_each_online_cpu(i) {
-			info = &per_cpu(doorbell_cpu_info, i);
-			set_bit(msg, &info->messages);
-		}
-		ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0);
-	}
+	ppc_msgsnd(PPC_DBELL, 0, data);
 }
 
 void doorbell_exception(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
-	int msg;
 
-	/* Warning: regs can be NULL when called from irq enable */
+	irq_enter();
 
-	if (!info->messages || (num_online_cpus() < 2))
-		goto out;
+	smp_ipi_demux();
 
-	for (msg = 0; msg < 4; msg++)
-		if (test_and_clear_bit(msg, &info->messages))
-			smp_message_recv(msg);
-
-out:
+	irq_exit();
 	set_irq_regs(old_regs);
 }
-
-void doorbell_check_self(void)
-{
-	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
-
-	if (!info->messages)
-		return;
-
-	ppc_msgsnd(PPC_DBELL, 0, info->tag);
-}
-
 #else /* CONFIG_SMP */
 void doorbell_exception(struct pt_regs *regs)
 {
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index cf02cad62d9..d238c082c3c 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -179,3 +179,21 @@ static int __init dma_init(void)
        return 0;
 }
 fs_initcall(dma_init);
+
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t handle, size_t size)
+{
+	unsigned long pfn;
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	pfn = __dma_get_coherent_pfn((unsigned long)cpu_addr);
+#else
+	pfn = page_to_pfn(virt_to_page(cpu_addr));
+#endif
+	return remap_pfn_range(vma, vma->vm_start,
+			       pfn + vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot);
+}
+EXPORT_SYMBOL_GPL(dma_mmap_coherent);
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d82878c4daa..d834425186a 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -421,6 +421,12 @@ BEGIN_FTR_SECTION
 	std	r24,THREAD_VRSAVE(r3)
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	mfspr	r25,SPRN_DSCR
+	std	r25,THREAD_DSCR(r3)
+END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
+#endif
 	and.	r0,r0,r22
 	beq+	1f
 	andc	r22,r22,r0
@@ -462,10 +468,10 @@ BEGIN_FTR_SECTION
   FTR_SECTION_ELSE_NESTED(95)
 	clrrdi	r6,r8,40	/* get its 1T ESID */
 	clrrdi	r9,r1,40	/* get current sp 1T ESID */
-  ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95)
+  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_1T_SEGMENT, 95)
 FTR_SECTION_ELSE
 	b	2f
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB)
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_SLB)
 	clrldi.	r0,r6,2		/* is new ESID c00000000? */
 	cmpd	cr1,r6,r9	/* or is new ESID the same as current ESID? */
 	cror	eq,4*cr1+eq,eq
@@ -479,7 +485,7 @@ BEGIN_FTR_SECTION
 	li	r9,MMU_SEGSIZE_1T	/* insert B field */
 	oris	r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
 	rldimi	r7,r9,SLB_VSID_SSIZE_SHIFT,0
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 
 	/* Update the last bolted SLB.  No write barriers are needed
 	 * here, provided we only update the current CPU's SLB shadow
@@ -491,7 +497,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
 	std	r7,SLBSHADOW_STACKVSID(r9)  /* Save VSID */
 	std	r0,SLBSHADOW_STACKESID(r9)  /* Save ESID */
 
-	/* No need to check for CPU_FTR_NO_SLBIE_B here, since when
+	/* No need to check for MMU_FTR_NO_SLBIE_B here, since when
 	 * we have 1TB segments, the only CPUs known to have the errata
 	 * only support less than 1TB of system memory and we'll never
 	 * actually hit this code path.
@@ -522,6 +528,15 @@ BEGIN_FTR_SECTION
 	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	ld	r0,THREAD_DSCR(r4)
+	cmpd	r0,r25
+	beq	1f
+	mtspr	SPRN_DSCR,r0
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
+#endif
 
 	/* r3-r13 are destroyed -- Cort */
 	REST_8GPRS(14, r1)
@@ -838,7 +853,7 @@ _GLOBAL(enter_rtas)
 
 _STATIC(rtas_return_loc)
 	/* relocation is off at this point */
-	mfspr	r4,SPRN_SPRG_PACA	/* Get PACA */
+	GET_PACA(r4)
 	clrldi	r4,r4,2			/* convert to realmode address */
 
 	bcl	20,31,$+4
@@ -869,7 +884,7 @@ _STATIC(rtas_restore_regs)
 	REST_8GPRS(14, r1)		/* Restore the non-volatiles */
 	REST_10GPRS(22, r1)		/* ditto */
 
-	mfspr	r13,SPRN_SPRG_PACA
+	GET_PACA(r13)
 
 	ld	r4,_CCR(r1)
 	mtcr	r4
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 5c43063d250..d24d4400cc7 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -17,6 +17,7 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/thread_info.h>
+#include <asm/reg_a2.h>
 #include <asm/exception-64e.h>
 #include <asm/bug.h>
 #include <asm/irqflags.h>
@@ -252,9 +253,6 @@ exception_marker:
 	.balign	0x1000
 	.globl interrupt_base_book3e
 interrupt_base_book3e:					/* fake trap */
-	/* Note: If real debug exceptions are supported by the HW, the vector
-	 * below will have to be patched up to point to an appropriate handler
-	 */
 	EXCEPTION_STUB(0x000, machine_check)		/* 0x0200 */
 	EXCEPTION_STUB(0x020, critical_input)		/* 0x0580 */
 	EXCEPTION_STUB(0x040, debug_crit)		/* 0x0d00 */
@@ -271,8 +269,13 @@ interrupt_base_book3e:					/* fake trap */
 	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
 	EXCEPTION_STUB(0x1c0, data_tlb_miss)
 	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+	EXCEPTION_STUB(0x260, perfmon)
 	EXCEPTION_STUB(0x280, doorbell)
 	EXCEPTION_STUB(0x2a0, doorbell_crit)
+	EXCEPTION_STUB(0x2c0, guest_doorbell)
+	EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
+	EXCEPTION_STUB(0x300, hypercall)
+	EXCEPTION_STUB(0x320, ehpriv)
 
 	.globl interrupt_end_book3e
 interrupt_end_book3e:
@@ -379,7 +382,7 @@ interrupt_end_book3e:
 	mfspr	r13,SPRN_SPRG_PACA	/* get our PACA */
 	b	system_call_common
 
-/* Auxillary Processor Unavailable Interrupt */
+/* Auxiliary Processor Unavailable Interrupt */
 	START_EXCEPTION(ap_unavailable);
 	NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP)
@@ -454,6 +457,70 @@ interrupt_end_book3e:
 kernel_dbg_exc:
 	b	.	/* NYI */
 
+/* Debug exception as a debug interrupt*/
+	START_EXCEPTION(debug_debug);
+	DBG_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+
+	/*
+	 * If there is a single step or branch-taken exception in an
+	 * exception entry sequence, it was probably meant to apply to
+	 * the code where the exception occurred (since exception entry
+	 * doesn't turn off DE automatically).  We simulate the effect
+	 * of turning off DE on entry to an exception handler by turning
+	 * off DE in the DSRR1 value and clearing the debug status.
+	 */
+
+	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
+	andis.	r15,r14,DBSR_IC@h
+	beq+	1f
+
+	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
+	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+	cmpld	cr0,r10,r14
+	cmpld	cr1,r10,r15
+	blt+	cr0,1f
+	bge+	cr1,1f
+
+	/* here it looks like we got an inappropriate debug exception. */
+	lis	r14,DBSR_IC@h		/* clear the IC event */
+	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the DSRR1 value */
+	mtspr	SPRN_DBSR,r14
+	mtspr	SPRN_DSRR1,r11
+	lwz	r10,PACA_EXDBG+EX_CR(r13)	/* restore registers */
+	ld	r1,PACA_EXDBG+EX_R1(r13)
+	ld	r14,PACA_EXDBG+EX_R14(r13)
+	ld	r15,PACA_EXDBG+EX_R15(r13)
+	mtcr	r10
+	ld	r10,PACA_EXDBG+EX_R10(r13)	/* restore registers */
+	ld	r11,PACA_EXDBG+EX_R11(r13)
+	mfspr	r13,SPRN_SPRG_DBG_SCRATCH
+	rfdi
+
+	/* Normal debug exception */
+	/* XXX We only handle coming from userspace for now since we can't
+	 *     quite save properly an interrupted kernel state yet
+	 */
+1:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
+	beq	kernel_dbg_exc;		/* if from kernel mode */
+
+	/* Now we mash up things to make it look like we are coming on a
+	 * normal exception
+	 */
+	mfspr	r15,SPRN_SPRG_DBG_SCRATCH
+	mtspr	SPRN_SPRG_GEN_SCRATCH,r15
+	mfspr	r14,SPRN_DBSR
+	EXCEPTION_COMMON(0xd00, PACA_EXDBG, INTS_DISABLE_ALL)
+	std	r14,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r14
+	ld	r14,PACA_EXDBG+EX_R14(r13)
+	ld	r15,PACA_EXDBG+EX_R15(r13)
+	bl	.save_nvgprs
+	bl	.DebugException
+	b	.ret_from_except
+
+	MASKABLE_EXCEPTION(0x260, perfmon, .performance_monitor_exception, ACK_NONE)
+
 /* Doorbell interrupt */
 	MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE)
 
@@ -468,6 +535,11 @@ kernel_dbg_exc:
 //	b	ret_from_crit_except
 	b	.
 
+	MASKABLE_EXCEPTION(0x2c0, guest_doorbell, .unknown_exception, ACK_NONE)
+	MASKABLE_EXCEPTION(0x2e0, guest_doorbell_crit, .unknown_exception, ACK_NONE)
+	MASKABLE_EXCEPTION(0x310, hypercall, .unknown_exception, ACK_NONE)
+	MASKABLE_EXCEPTION(0x320, ehpriv, .unknown_exception, ACK_NONE)
+
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -587,7 +659,12 @@ fast_exception_return:
 BAD_STACK_TRAMPOLINE(0x000)
 BAD_STACK_TRAMPOLINE(0x100)
 BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x260)
+BAD_STACK_TRAMPOLINE(0x2c0)
+BAD_STACK_TRAMPOLINE(0x2e0)
 BAD_STACK_TRAMPOLINE(0x300)
+BAD_STACK_TRAMPOLINE(0x310)
+BAD_STACK_TRAMPOLINE(0x320)
 BAD_STACK_TRAMPOLINE(0x400)
 BAD_STACK_TRAMPOLINE(0x500)
 BAD_STACK_TRAMPOLINE(0x600)
@@ -864,8 +941,23 @@ have_hes:
 	 * that will have to be made dependent on whether we are running under
 	 * a hypervisor I suppose.
 	 */
-	ori	r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS
-	mtspr	SPRN_MAS0,r3
+
+	/* BEWARE, MAGIC
+	 * This code is called as an ordinary function on the boot CPU. But to
+	 * avoid duplication, this code is also used in SCOM bringup of
+	 * secondary CPUs. We read the code between the initial_tlb_code_start
+	 * and initial_tlb_code_end labels one instruction at a time and RAM it
+	 * into the new core via SCOM. That doesn't process branches, so there
+	 * must be none between those two labels. It also means if this code
+	 * ever takes any parameters, the SCOM code must also be updated to
+	 * provide them.
+	 */
+	.globl a2_tlbinit_code_start
+a2_tlbinit_code_start:
+
+	ori	r11,r3,MAS0_WQ_ALLWAYS
+	oris	r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
+	mtspr	SPRN_MAS0,r11
 	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
 	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
 	mtspr	SPRN_MAS1,r3
@@ -879,18 +971,86 @@ have_hes:
 	/* Write the TLB entry */
 	tlbwe
 
+	.globl a2_tlbinit_after_linear_map
+a2_tlbinit_after_linear_map:
+
 	/* Now we branch the new virtual address mapped by this entry */
 	LOAD_REG_IMMEDIATE(r3,1f)
 	mtctr	r3
 	bctr
 
 1:	/* We are now running at PAGE_OFFSET, clean the TLB of everything
-	 * else (XXX we should scan for bolted crap from the firmware too)
+	 * else (including IPROTed things left by firmware)
+	 * r4 = TLBnCFG
+	 * r3 = current address (more or less)
 	 */
+
+	li	r5,0
+	mtspr	SPRN_MAS6,r5
+	tlbsx	0,r3
+
+	rlwinm	r9,r4,0,TLBnCFG_N_ENTRY
+	rlwinm	r10,r4,8,0xff
+	addi	r10,r10,-1	/* Get inner loop mask */
+
+	li	r3,1
+
+	mfspr	r5,SPRN_MAS1
+	rlwinm	r5,r5,0,(~(MAS1_VALID|MAS1_IPROT))
+
+	mfspr	r6,SPRN_MAS2
+	rldicr	r6,r6,0,51		/* Extract EPN */
+
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r7,r7,0,0xffff0fff	/* Clear HES and WQ */
+
+	rlwinm	r8,r7,16,0xfff		/* Extract ESEL */
+
+2:	add	r4,r3,r8
+	and	r4,r4,r10
+
+	rlwimi	r7,r4,16,MAS0_ESEL_MASK
+
+	mtspr	SPRN_MAS0,r7
+	mtspr	SPRN_MAS1,r5
+	mtspr	SPRN_MAS2,r6
+	tlbwe
+
+	addi	r3,r3,1
+	and.	r4,r3,r10
+
+	bne	3f
+	addis	r6,r6,(1<<30)@h
+3:
+	cmpw	r3,r9
+	blt	2b
+
+	.globl  a2_tlbinit_after_iprot_flush
+a2_tlbinit_after_iprot_flush:
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
+	/* Now establish early debug mappings if applicable */
+	/* Restore the MAS0 we used for linear mapping load */
+	mtspr	SPRN_MAS0,r11
+
+	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
+	ori	r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT)
+	mtspr	SPRN_MAS1,r3
+	LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G)
+	mtspr	SPRN_MAS2,r3
+	LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW)
+	mtspr	SPRN_MAS7_MAS3,r3
+	/* re-use the MAS8 value from the linear mapping */
+	tlbwe
+#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
+
 	PPC_TLBILX(0,0,0)
 	sync
 	isync
 
+	.globl a2_tlbinit_code_end
+a2_tlbinit_code_end:
+
 	/* We translate LR and return */
 	mflr	r3
 	tovirt(r3,r3)
@@ -1040,3 +1200,33 @@ _GLOBAL(__setup_base_ivors)
 	sync
 
 	blr
+
+_GLOBAL(setup_perfmon_ivor)
+	SET_IVOR(35, 0x260) /* Performance Monitor */
+	blr
+
+_GLOBAL(setup_doorbell_ivors)
+	SET_IVOR(36, 0x280) /* Processor Doorbell */
+	SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
+
+	/* Check MMUCFG[LPIDSIZE] to determine if we have category E.HV */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beqlr
+
+	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
+	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
+	blr
+
+_GLOBAL(setup_ehv_ivors)
+	/*
+	 * We may be running as a guest and lack E.HV even on a chip
+	 * that normally has it.
+	 */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beqlr
+
+	SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
+	SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
+	blr
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 8a817995b4c..a85f4874cba 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -5,7 +5,7 @@
  * handling and other fixed offset specific things.
  *
  * This file is meant to be #included from head_64.S due to
- * position dependant assembly.
+ * position dependent assembly.
  *
  * Most of this originates from head_64.S and thus has the same
  * copyright history.
@@ -37,23 +37,51 @@
 	.globl __start_interrupts
 __start_interrupts:
 
-	STD_EXCEPTION_PSERIES(0x100, system_reset)
+	.globl system_reset_pSeries;
+system_reset_pSeries:
+	HMT_MEDIUM;
+	DO_KVM	0x100;
+	SET_SCRATCH0(r13)
+#ifdef CONFIG_PPC_P7_NAP
+BEGIN_FTR_SECTION
+	/* Running native on arch 2.06 or later, check if we are
+	 * waking up from nap. We only handle no state loss and
+	 * supervisor state loss. We do -not- handle hypervisor
+	 * state loss at this time.
+	 */
+	mfspr	r13,SPRN_SRR1
+	rlwinm	r13,r13,47-31,30,31
+	cmpwi	cr0,r13,1
+	bne	1f
+	b	.power7_wakeup_noloss
+1:	cmpwi	cr0,r13,2
+	bne	1f
+	b	.power7_wakeup_loss
+	/* Total loss of HV state is fatal, we could try to use the
+	 * PIR to locate a PACA, then use an emergency stack etc...
+	 * but for now, let's just stay stuck here
+	 */
+1:	cmpwi	cr0,r13,3
+	beq	.
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE_206)
+#endif /* CONFIG_PPC_P7_NAP */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD)
 
 	. = 0x200
 _machine_check_pSeries:
 	HMT_MEDIUM
 	DO_KVM	0x200
-	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common, EXC_STD)
 
 	. = 0x300
 	.globl data_access_pSeries
 data_access_pSeries:
 	HMT_MEDIUM
 	DO_KVM	0x300
-	mtspr	SPRN_SPRG_SCRATCH0,r13
+	SET_SCRATCH0(r13)
 BEGIN_FTR_SECTION
-	mfspr	r13,SPRN_SPRG_PACA
+	GET_PACA(r13)
 	std	r9,PACA_EXSLB+EX_R9(r13)
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	mfspr	r10,SPRN_DAR
@@ -67,22 +95,22 @@ BEGIN_FTR_SECTION
 	std	r11,PACA_EXGEN+EX_R11(r13)
 	ld	r11,PACA_EXSLB+EX_R9(r13)
 	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r12,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r12)
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R9(r13)
 	std	r12,PACA_EXGEN+EX_R13(r13)
-	EXCEPTION_PROLOG_PSERIES_1(data_access_common)
+	EXCEPTION_PROLOG_PSERIES_1(data_access_common, EXC_STD)
 FTR_SECTION_ELSE
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
-ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_SLB)
 
 	. = 0x380
 	.globl data_access_slb_pSeries
 data_access_slb_pSeries:
 	HMT_MEDIUM
 	DO_KVM	0x380
-	mtspr	SPRN_SPRG_SCRATCH0,r13
-	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_DAR
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
@@ -95,7 +123,7 @@ data_access_slb_pSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r10)
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 #ifndef CONFIG_RELOCATABLE
@@ -113,15 +141,15 @@ data_access_slb_pSeries:
 	bctr
 #endif
 
-	STD_EXCEPTION_PSERIES(0x400, instruction_access)
+	STD_EXCEPTION_PSERIES(0x400, 0x400, instruction_access)
 
 	. = 0x480
 	.globl instruction_access_slb_pSeries
 instruction_access_slb_pSeries:
 	HMT_MEDIUM
 	DO_KVM	0x480
-	mtspr	SPRN_SPRG_SCRATCH0,r13
-	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
@@ -134,7 +162,7 @@ instruction_access_slb_pSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r10)
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 #ifndef CONFIG_RELOCATABLE
@@ -147,13 +175,29 @@ instruction_access_slb_pSeries:
 	bctr
 #endif
 
-	MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
-	STD_EXCEPTION_PSERIES(0x600, alignment)
-	STD_EXCEPTION_PSERIES(0x700, program_check)
-	STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
-	MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
-	STD_EXCEPTION_PSERIES(0xa00, trap_0a)
-	STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+	/* We open code these as we can't have a ". = x" (even with
+	 * x = "." within a feature section
+	 */
+	. = 0x500;
+	.globl hardware_interrupt_pSeries;
+	.globl hardware_interrupt_hv;
+hardware_interrupt_pSeries:
+hardware_interrupt_hv:
+	BEGIN_FTR_SECTION
+		_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD)
+	FTR_SECTION_ELSE
+		_MASKABLE_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV)
+	ALT_FTR_SECTION_END_IFCLR(CPU_FTR_HVMODE_206)
+
+	STD_EXCEPTION_PSERIES(0x600, 0x600, alignment)
+	STD_EXCEPTION_PSERIES(0x700, 0x700, program_check)
+	STD_EXCEPTION_PSERIES(0x800, 0x800, fp_unavailable)
+
+	MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer)
+	MASKABLE_EXCEPTION_HV(0x980, 0x980, decrementer)
+
+	STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a)
+	STD_EXCEPTION_PSERIES(0xb00, 0xb00, trap_0b)
 
 	. = 0xc00
 	.globl	system_call_pSeries
@@ -165,13 +209,13 @@ BEGIN_FTR_SECTION
 	beq-	1f
 END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	mr	r9,r13
-	mfspr	r13,SPRN_SPRG_PACA
+	GET_PACA(r13)
 	mfspr	r11,SPRN_SRR0
-	ld	r12,PACAKBASE(r13)
-	ld	r10,PACAKMSR(r13)
-	LOAD_HANDLER(r12, system_call_entry)
-	mtspr	SPRN_SRR0,r12
 	mfspr	r12,SPRN_SRR1
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, system_call_entry)
+	mtspr	SPRN_SRR0,r10
+	ld	r10,PACAKMSR(r13)
 	mtspr	SPRN_SRR1,r10
 	rfid
 	b	.	/* prevent speculative execution */
@@ -183,8 +227,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	rfid		/* return to userspace */
 	b	.
 
-	STD_EXCEPTION_PSERIES(0xd00, single_step)
-	STD_EXCEPTION_PSERIES(0xe00, trap_0e)
+	STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step)
+
+	/* At 0xe??? we have a bunch of hypervisor exceptions, we branch
+	 * out of line to handle them
+	 */
+	. = 0xe00
+	b	h_data_storage_hv
+	. = 0xe20
+	b	h_instr_storage_hv
+	. = 0xe40
+	b	emulation_assist_hv
+	. = 0xe50
+	b	hmi_exception_hv
+	. = 0xe60
+	b	hmi_exception_hv
 
 	/* We need to deal with the Altivec unavailable exception
 	 * here which is at 0xf20, thus in the middle of the
@@ -193,39 +250,42 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	 */
 performance_monitor_pSeries_1:
 	. = 0xf00
-	DO_KVM	0xf00
 	b	performance_monitor_pSeries
 
 altivec_unavailable_pSeries_1:
 	. = 0xf20
-	DO_KVM	0xf20
 	b	altivec_unavailable_pSeries
 
 vsx_unavailable_pSeries_1:
 	. = 0xf40
-	DO_KVM	0xf40
 	b	vsx_unavailable_pSeries
 
 #ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
+	STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
 #endif /* CONFIG_CBE_RAS */
-	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+	STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
 #ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
+	STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
 #endif /* CONFIG_CBE_RAS */
-	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+	STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
 #ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
+	STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
 #endif /* CONFIG_CBE_RAS */
 
 	. = 0x3000
 
-/*** pSeries interrupt support ***/
+/*** Out of line interrupts support ***/
+
+	/* moved from 0xe00 */
+	STD_EXCEPTION_HV(., 0xe00, h_data_storage)
+	STD_EXCEPTION_HV(., 0xe20, h_instr_storage)
+	STD_EXCEPTION_HV(., 0xe40, emulation_assist)
+	STD_EXCEPTION_HV(., 0xe60, hmi_exception) /* need to flush cache ? */
 
 	/* moved from 0xf00 */
-	STD_EXCEPTION_PSERIES(., performance_monitor)
-	STD_EXCEPTION_PSERIES(., altivec_unavailable)
-	STD_EXCEPTION_PSERIES(., vsx_unavailable)
+	STD_EXCEPTION_PSERIES(., 0xf00, performance_monitor)
+	STD_EXCEPTION_PSERIES(., 0xf20, altivec_unavailable)
+	STD_EXCEPTION_PSERIES(., 0xf40, vsx_unavailable)
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -240,17 +300,30 @@ masked_interrupt:
 	rotldi	r10,r10,16
 	mtspr	SPRN_SRR1,r10
 	ld	r10,PACA_EXGEN+EX_R10(r13)
-	mfspr	r13,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r13)
 	rfid
 	b	.
 
+masked_Hinterrupt:
+	stb	r10,PACAHARDIRQEN(r13)
+	mtcrf	0x80,r9
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	mfspr	r10,SPRN_HSRR1
+	rldicl	r10,r10,48,1		/* clear MSR_EE */
+	rotldi	r10,r10,16
+	mtspr	SPRN_HSRR1,r10
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	GET_SCRATCH0(r13)
+	hrfid
+	b	.
+
 	.align	7
 do_stab_bolted_pSeries:
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r10)
 	std	r10,PACA_EXSLB+EX_R13(r13)
-	EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted)
+	EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD)
 
 #ifdef CONFIG_PPC_PSERIES
 /*
@@ -260,15 +333,15 @@ do_stab_bolted_pSeries:
       .align 7
 system_reset_fwnmi:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+	SET_SCRATCH0(r13)		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD)
 
 	.globl machine_check_fwnmi
       .align 7
 machine_check_fwnmi:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+	SET_SCRATCH0(r13)		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common, EXC_STD)
 
 #endif /* CONFIG_PPC_PSERIES */
 
@@ -282,7 +355,7 @@ slb_miss_user_pseries:
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R11(r13)
 	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r10,SPRG_SCRATCH0
+	GET_SCRATCH0(r10)
 	ld	r11,PACA_EXSLB+EX_R9(r13)
 	ld	r12,PACA_EXSLB+EX_R3(r13)
 	std	r10,PACA_EXGEN+EX_R13(r13)
@@ -342,6 +415,8 @@ machine_check_common:
 	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
 	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
+        STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
+        STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
 	STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
 	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
 #ifdef CONFIG_ALTIVEC
@@ -386,9 +461,24 @@ bad_stack:
 	std	r12,_XER(r1)
 	SAVE_GPR(0,r1)
 	SAVE_GPR(2,r1)
-	SAVE_4GPRS(3,r1)
-	SAVE_2GPRS(7,r1)
-	SAVE_10GPRS(12,r1)
+	ld	r10,EX_R3(r3)
+	std	r10,GPR3(r1)
+	SAVE_GPR(4,r1)
+	SAVE_4GPRS(5,r1)
+	ld	r9,EX_R9(r3)
+	ld	r10,EX_R10(r3)
+	SAVE_2GPRS(9,r1)
+	ld	r9,EX_R11(r3)
+	ld	r10,EX_R12(r3)
+	ld	r11,EX_R13(r3)
+	std	r9,GPR11(r1)
+	std	r10,GPR12(r1)
+	std	r11,GPR13(r1)
+BEGIN_FTR_SECTION
+	ld	r10,EX_CFAR(r3)
+	std	r10,ORIG_GPR3(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+	SAVE_8GPRS(14,r1)
 	SAVE_10GPRS(22,r1)
 	lhz	r12,PACA_TRAP_SAVE(r13)
 	std	r12,_TRAP(r1)
@@ -397,6 +487,9 @@ bad_stack:
 	li	r12,0
 	std	r12,0(r11)
 	ld	r2,PACATOC(r13)
+	ld	r11,exception_marker@toc(r2)
+	std	r12,RESULT(r1)
+	std	r11,STACK_FRAME_OVERHEAD-16(r1)
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.kernel_bad_stack
 	b	1b
@@ -419,6 +512,19 @@ data_access_common:
 	li	r5,0x300
 	b	.do_hash_page	 	/* Try to handle as hpte fault */
 
+	.align  7
+        .globl  h_data_storage_common
+h_data_storage_common:
+        mfspr   r10,SPRN_HDAR
+        std     r10,PACA_EXGEN+EX_DAR(r13)
+        mfspr   r10,SPRN_HDSISR
+        stw     r10,PACA_EXGEN+EX_DSISR(r13)
+        EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
+        bl      .save_nvgprs
+        addi    r3,r1,STACK_FRAME_OVERHEAD
+        bl      .unknown_exception
+        b       .ret_from_except
+
 	.align	7
 	.globl instruction_access_common
 instruction_access_common:
@@ -428,6 +534,8 @@ instruction_access_common:
 	li	r5,0x400
 	b	.do_hash_page		/* Try to handle as hpte fault */
 
+        STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+
 /*
  * Here is the common SLB miss user that is used when going to virtual
  * mode for SLB misses, that is currently not used
@@ -750,7 +858,7 @@ _STATIC(do_hash_page)
 BEGIN_FTR_SECTION
 	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
 	bne-	do_ste_alloc		/* If so handle it */
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
 
 	clrrdi	r11,r1,THREAD_SHIFT
 	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
@@ -977,20 +1085,6 @@ _GLOBAL(do_stab_bolted)
 	rfid
 	b	.	/* prevent speculative execution */
 
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on).  The address is given to the hv
- * as a page number (see xLparMap below), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
-	. = STAB0_OFFSET	/* 0x6000 */
-	.globl initial_stab
-initial_stab:
-	.space	4096
-
 #ifdef CONFIG_PPC_PSERIES
 /*
  * Data area reserved for FWNMI option.
@@ -1027,3 +1121,17 @@ xLparMap:
 #ifdef CONFIG_PPC_PSERIES
         . = 0x8000
 #endif /* CONFIG_PPC_PSERIES */
+
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on).  The address is given to the hv
+ * as a page number (see xLparMap above), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+	. = STAB0_OFFSET	/* 0x8000 */
+	.globl initial_stab
+initial_stab:
+	.space	4096
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 98c4b29a56f..ba250d505e0 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -805,19 +805,6 @@ _ENTRY(copy_and_flush)
 	blr
 
 #ifdef CONFIG_SMP
-#ifdef CONFIG_GEMINI
-	.globl	__secondary_start_gemini
-__secondary_start_gemini:
-        mfspr   r4,SPRN_HID0
-        ori     r4,r4,HID0_ICFI
-        li      r3,0
-        ori     r3,r3,HID0_ICE
-        andc    r4,r4,r3
-        mtspr   SPRN_HID0,r4
-        sync
-        b       __secondary_start
-#endif /* CONFIG_GEMINI */
-
 	.globl __secondary_start_mpc86xx
 __secondary_start_mpc86xx:
 	mfspr	r3, SPRN_PIR
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 9dd21a8c4d5..a91626d87fc 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -766,7 +766,7 @@ DataAccess:
 	 * miss get to this point to load the TLB.
 	 * 	r10 - TLB_TAG value
 	 * 	r11 - Linux PTE
-	 *	r12, r9 - avilable to use
+	 *	r12, r9 - available to use
 	 *	PID - loaded with proper value when we get here
 	 *	Upon exit, we reload everything and RFI.
 	 * Actually, it will fit now, but oh well.....a common place
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index cbb3436b592..5e12b741ba5 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -178,7 +178,7 @@ interrupt_base:
 	NORMAL_EXCEPTION_PROLOG
 	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
 
-	/* Auxillary Processor Unavailable Interrupt */
+	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
 
 	/* Decrementer Interrupt */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 782f23df7c8..ba504099844 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -40,7 +40,7 @@
 #include <asm/kvm_book3s_asm.h>
 #include <asm/ptrace.h>
 
-/* The physical memory is layed out such that the secondary processor
+/* The physical memory is laid out such that the secondary processor
  * spin code sits at 0x0000...0x00ff. On server, the vectors follow
  * using the layout described in exceptions-64s.S
  */
@@ -147,6 +147,8 @@ __secondary_hold:
 	mtctr	r4
 	mr	r3,r24
 	li	r4,0
+	/* Make sure that patched code is visible */
+	isync
 	bctr
 #else
 	BUG_OPCODE
@@ -216,19 +218,25 @@ generic_secondary_common_init:
 	 */
 	LOAD_REG_ADDR(r13, paca)	/* Load paca pointer		 */
 	ld	r13,0(r13)		/* Get base vaddr of paca array	 */
+#ifndef CONFIG_SMP
+	addi	r13,r13,PACA_SIZE	/* know r13 if used accidentally */
+	b	.kexec_wait		/* wait for next kernel if !SMP	 */
+#else
+	LOAD_REG_ADDR(r7, nr_cpu_ids)	/* Load nr_cpu_ids address       */
+	lwz	r7,0(r7)		/* also the max paca allocated 	 */
 	li	r5,0			/* logical cpu id                */
 1:	lhz	r6,PACAHWCPUID(r13)	/* Load HW procid from paca      */
 	cmpw	r6,r24			/* Compare to our id             */
 	beq	2f
 	addi	r13,r13,PACA_SIZE	/* Loop to next PACA on miss     */
 	addi	r5,r5,1
-	cmpwi	r5,NR_CPUS
+	cmpw	r5,r7			/* Check if more pacas exist     */
 	blt	1b
 
 	mr	r3,r24			/* not found, copy phys to r3	 */
 	b	.kexec_wait		/* next kernel might do better	 */
 
-2:	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG */
+2:	SET_PACA(r13)
 #ifdef CONFIG_PPC_BOOK3E
 	addi	r12,r13,PACA_EXTLB	/* and TLB exc frame in another  */
 	mtspr	SPRN_SPRG_TLB_EXFRAME,r12
@@ -236,34 +244,39 @@ generic_secondary_common_init:
 
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
-3:	HMT_LOW
-	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor should */
-					/* start.			 */
-
-#ifndef CONFIG_SMP
-	b	3b			/* Never go on non-SMP		 */
-#else
-	cmpwi	0,r23,0
-	beq	3b			/* Loop until told to go	 */
-
-	sync				/* order paca.run and cur_cpu_spec */
 
 	/* See if we need to call a cpu state restore handler */
 	LOAD_REG_ADDR(r23, cur_cpu_spec)
 	ld	r23,0(r23)
 	ld	r23,CPU_SPEC_RESTORE(r23)
 	cmpdi	0,r23,0
-	beq	4f
+	beq	3f
 	ld	r23,0(r23)
 	mtctr	r23
 	bctrl
 
-4:	/* Create a temp kernel stack for use before relocation is on.	*/
+3:	LOAD_REG_ADDR(r3, boot_cpu_count) /* Decrement boot_cpu_count */
+	lwarx	r4,0,r3
+	subi	r4,r4,1
+	stwcx.	r4,0,r3
+	bne	3b
+	isync
+
+4:	HMT_LOW
+	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor should */
+					/* start.			 */
+	cmpwi	0,r23,0
+	beq	4b			/* Loop until told to go	 */
+
+	sync				/* order paca.run and cur_cpu_spec */
+	isync				/* In case code patching happened */
+
+	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
 	subi	r1,r1,STACK_FRAME_OVERHEAD
 
 	b	__secondary_start
-#endif
+#endif /* SMP */
 
 /*
  * Turn the MMU off.
@@ -534,7 +547,14 @@ _GLOBAL(pmac_secondary_start)
 	ld	r4,0(r4)		/* Get base vaddr of paca array	*/
 	mulli	r13,r24,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
-	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG*/
+	SET_PACA(r13)			/* Save vaddr of paca in an SPRG*/
+
+	/* Mark interrupts soft and hard disabled (they might be enabled
+	 * in the PACA when doing hotplug)
+	 */
+	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13)
+	stb	r0,PACAHARDIRQEN(r13)
 
 	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
@@ -638,7 +658,7 @@ _GLOBAL(enable_64b_mode)
 	oris	r11,r11,0x8000		/* CM bit set, we'll set ICM later */
 	mtmsr	r11
 #else /* CONFIG_PPC_BOOK3E */
-	li	r12,(MSR_SF | MSR_ISF)@highest
+	li	r12,(MSR_64BIT | MSR_ISF)@highest
 	sldi	r12,r12,48
 	or	r11,r11,r12
 	mtmsrd	r11
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 3e02710d956..5ecf54cfa7d 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -326,7 +326,7 @@ interrupt_base:
 	NORMAL_EXCEPTION_PROLOG
 	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
 
-	/* Auxillary Processor Unavailable Interrupt */
+	/* Auxiliary Processor Unavailable Interrupt */
 	EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
 
 	/* Decrementer Interrupt */
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index c00d4ca1ee1..28581f1ad2c 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -527,7 +527,7 @@ static int ibmebus_bus_pm_resume_noirq(struct device *dev)
 
 #endif /* !CONFIG_SUSPEND */
 
-#ifdef CONFIG_HIBERNATION
+#ifdef CONFIG_HIBERNATE_CALLBACKS
 
 static int ibmebus_bus_pm_freeze(struct device *dev)
 {
@@ -665,7 +665,7 @@ static int ibmebus_bus_pm_restore_noirq(struct device *dev)
 	return ret;
 }
 
-#else /* !CONFIG_HIBERNATION */
+#else /* !CONFIG_HIBERNATE_CALLBACKS */
 
 #define ibmebus_bus_pm_freeze		NULL
 #define ibmebus_bus_pm_thaw		NULL
@@ -676,7 +676,7 @@ static int ibmebus_bus_pm_restore_noirq(struct device *dev)
 #define ibmebus_bus_pm_poweroff_noirq	NULL
 #define ibmebus_bus_pm_restore_noirq	NULL
 
-#endif /* !CONFIG_HIBERNATION */
+#endif /* !CONFIG_HIBERNATE_CALLBACKS */
 
 static struct dev_pm_ops ibmebus_bus_dev_pm_ops = {
 	.prepare = ibmebus_bus_pm_prepare,
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index 5328709eeed..ba319547860 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -53,24 +53,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	isync
 	b	1b
 
-_GLOBAL(power4_cpu_offline_powersave)
-	/* Go to NAP now */
-	mfmsr	r7
-	rldicl	r0,r7,48,1
-	rotldi	r0,r0,16
-	mtmsrd	r0,1			/* hard-disable interrupts */
-	li	r0,1
-	li	r6,0
-	stb	r0,PACAHARDIRQEN(r13)	/* we'll hard-enable shortly */
-	stb	r6,PACASOFTIRQEN(r13)	/* soft-disable irqs */
-BEGIN_FTR_SECTION
-	DSSALL
-	sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	ori	r7,r7,MSR_EE
-	oris	r7,r7,MSR_POW@h
-	sync
-	isync
-	mtmsrd	r7
-	isync
-	blr
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
new file mode 100644
index 00000000000..f8f0bc7f1d4
--- /dev/null
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -0,0 +1,97 @@
+/*
+ *  This file contains the power_save function for 970-family CPUs.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/ppc-opcode.h>
+
+#undef DEBUG
+
+	.text
+
+_GLOBAL(power7_idle)
+	/* Now check if user or arch enabled NAP mode */
+	LOAD_REG_ADDRBASE(r3,powersave_nap)
+	lwz	r4,ADDROFF(powersave_nap)(r3)
+	cmpwi	0,r4,0
+	beqlr
+
+	/* NAP is a state loss, we create a regs frame on the
+	 * stack, fill it up with the state we care about and
+	 * stick a pointer to it in PACAR1. We really only
+	 * need to save PC, some CR bits and the NV GPRs,
+	 * but for now an interrupt frame will do.
+	 */
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,-INT_FRAME_SIZE(r1)
+	std	r0,_LINK(r1)
+	std	r0,_NIP(r1)
+
+#ifndef CONFIG_SMP
+	/* Make sure FPU, VSX etc... are flushed as we may lose
+	 * state when going to nap mode
+	 */
+	bl	.discard_lazy_cpu_state
+#endif /* CONFIG_SMP */
+
+	/* Hard disable interrupts */
+	mfmsr	r9
+	rldicl	r9,r9,48,1
+	rotldi	r9,r9,16
+	mtmsrd	r9,1			/* hard-disable interrupts */
+	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13)	/* we'll hard-enable shortly */
+	stb	r0,PACAHARDIRQEN(r13)
+
+	/* Continue saving state */
+	SAVE_GPR(2, r1)
+	SAVE_NVGPRS(r1)
+	mfcr	r3
+	std	r3,_CCR(r1)
+	std	r9,_MSR(r1)
+	std	r1,PACAR1(r13)
+
+	/* Magic NAP mode enter sequence */
+	std	r0,0(r1)
+	ptesync
+	ld	r0,0(r1)
+1:	cmp	cr0,r0,r0
+	bne	1b
+	PPC_NAP
+	b	.
+
+_GLOBAL(power7_wakeup_loss)
+	GET_PACA(r13)
+	ld	r1,PACAR1(r13)
+	REST_NVGPRS(r1)
+	REST_GPR(2, r1)
+	ld	r3,_CCR(r1)
+	ld	r4,_MSR(r1)
+	ld	r5,_NIP(r1)
+	addi	r1,r1,INT_FRAME_SIZE
+	mtcr	r3
+	mtspr	SPRN_SRR1,r4
+	mtspr	SPRN_SRR0,r5
+	rfid
+
+_GLOBAL(power7_wakeup_noloss)
+	GET_PACA(r13)
+	ld	r1,PACAR1(r13)
+	ld	r4,_MSR(r1)
+	ld	r5,_NIP(r1)
+	addi	r1,r1,INT_FRAME_SIZE
+	mtspr	SPRN_SRR1,r4
+	mtspr	SPRN_SRR0,r5
+	rfid
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/kernel/io-workarounds.c
index 5c1118e3194..ffafaea3d26 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/kernel/io-workarounds.c
@@ -17,8 +17,7 @@
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
 #include <asm/ppc-pci.h>
-
-#include "io-workarounds.h"
+#include <asm/io-workarounds.h>
 
 #define IOWA_MAX_BUS	8
 
@@ -145,7 +144,19 @@ static void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size,
 	return res;
 }
 
-/* Regist new bus to support workaround */
+/* Enable IO workaround */
+static void __devinit io_workaround_init(void)
+{
+	static int io_workaround_inited;
+
+	if (io_workaround_inited)
+		return;
+	ppc_pci_io = iowa_pci_io;
+	ppc_md.ioremap = iowa_ioremap;
+	io_workaround_inited = 1;
+}
+
+/* Register new bus to support workaround */
 void __devinit iowa_register_bus(struct pci_controller *phb,
 			struct ppc_pci_io *ops,
 			int (*initfunc)(struct iowa_bus *, void *), void *data)
@@ -153,6 +164,8 @@ void __devinit iowa_register_bus(struct pci_controller *phb,
 	struct iowa_bus *bus;
 	struct device_node *np = phb->dn;
 
+	io_workaround_init();
+
 	if (iowa_bus_count >= IOWA_MAX_BUS) {
 		pr_err("IOWA:Too many pci bridges, "
 		       "workarounds disabled for %s\n", np->full_name);
@@ -162,6 +175,7 @@ void __devinit iowa_register_bus(struct pci_controller *phb,
 	bus = &iowa_busses[iowa_bus_count];
 	bus->phb = phb;
 	bus->ops = ops;
+	bus->private = data;
 
 	if (initfunc)
 		if ((*initfunc)(bus, data))
@@ -172,14 +186,3 @@ void __devinit iowa_register_bus(struct pci_controller *phb,
 	pr_debug("IOWA:[%d]Add bus, %s.\n", iowa_bus_count-1, np->full_name);
 }
 
-/* enable IO workaround */
-void __devinit io_workaround_init(void)
-{
-	static int io_workaround_inited;
-
-	if (io_workaround_inited)
-		return;
-	ppc_pci_io = iowa_pci_io;
-	ppc_md.ioremap = iowa_ioremap;
-	io_workaround_inited = 1;
-}
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 63625e0650b..a24d37d4cf5 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -66,7 +66,6 @@
 #include <asm/ptrace.h>
 #include <asm/machdep.h>
 #include <asm/udbg.h>
-#include <asm/dbell.h>
 #include <asm/smp.h>
 
 #ifdef CONFIG_PPC64
@@ -160,7 +159,8 @@ notrace void arch_local_irq_restore(unsigned long en)
 
 #if defined(CONFIG_BOOKE) && defined(CONFIG_SMP)
 	/* Check for pending doorbell interrupts and resend to ourself */
-	doorbell_check_self();
+	if (cpu_has_feature(CPU_FTR_DBELL))
+		smp_muxed_ipi_resend();
 #endif
 
 	/*
@@ -246,12 +246,13 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-void fixup_irqs(const struct cpumask *map)
+void migrate_irqs(void)
 {
 	struct irq_desc *desc;
 	unsigned int irq;
 	static int warned;
 	cpumask_var_t mask;
+	const struct cpumask *map = cpu_online_mask;
 
 	alloc_cpumask_var(&mask, GFP_KERNEL);
 
@@ -396,24 +397,28 @@ struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
 void exc_lvl_ctx_init(void)
 {
 	struct thread_info *tp;
-	int i, hw_cpu;
+	int i, cpu_nr;
 
 	for_each_possible_cpu(i) {
-		hw_cpu = get_hard_smp_processor_id(i);
-		memset((void *)critirq_ctx[hw_cpu], 0, THREAD_SIZE);
-		tp = critirq_ctx[hw_cpu];
-		tp->cpu = i;
+#ifdef CONFIG_PPC64
+		cpu_nr = i;
+#else
+		cpu_nr = get_hard_smp_processor_id(i);
+#endif
+		memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE);
+		tp = critirq_ctx[cpu_nr];
+		tp->cpu = cpu_nr;
 		tp->preempt_count = 0;
 
 #ifdef CONFIG_BOOKE
-		memset((void *)dbgirq_ctx[hw_cpu], 0, THREAD_SIZE);
-		tp = dbgirq_ctx[hw_cpu];
-		tp->cpu = i;
+		memset((void *)dbgirq_ctx[cpu_nr], 0, THREAD_SIZE);
+		tp = dbgirq_ctx[cpu_nr];
+		tp->cpu = cpu_nr;
 		tp->preempt_count = 0;
 
-		memset((void *)mcheckirq_ctx[hw_cpu], 0, THREAD_SIZE);
-		tp = mcheckirq_ctx[hw_cpu];
-		tp->cpu = i;
+		memset((void *)mcheckirq_ctx[cpu_nr], 0, THREAD_SIZE);
+		tp = mcheckirq_ctx[cpu_nr];
+		tp->cpu = cpu_nr;
 		tp->preempt_count = HARDIRQ_OFFSET;
 #endif
 	}
@@ -476,20 +481,41 @@ void do_softirq(void)
  * IRQ controller and virtual interrupts
  */
 
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+	irq_hw_number_t	hwirq;
+	struct irq_host	*host;
+};
+
 static LIST_HEAD(irq_hosts);
 static DEFINE_RAW_SPINLOCK(irq_big_lock);
-static unsigned int revmap_trees_allocated;
 static DEFINE_MUTEX(revmap_trees_mutex);
-struct irq_map_entry irq_map[NR_IRQS];
+static struct irq_map_entry irq_map[NR_IRQS];
 static unsigned int irq_virq_count = NR_IRQS;
 static struct irq_host *irq_default_host;
 
+irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
+{
+	return irq_map[d->irq].hwirq;
+}
+EXPORT_SYMBOL_GPL(irqd_to_hwirq);
+
 irq_hw_number_t virq_to_hw(unsigned int virq)
 {
 	return irq_map[virq].hwirq;
 }
 EXPORT_SYMBOL_GPL(virq_to_hw);
 
+bool virq_is_host(unsigned int virq, struct irq_host *host)
+{
+	return irq_map[virq].host == host;
+}
+EXPORT_SYMBOL_GPL(virq_is_host);
+
 static int default_irq_host_match(struct irq_host *h, struct device_node *np)
 {
 	return h->of_node != NULL && h->of_node == np;
@@ -510,7 +536,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	/* Allocate structure and revmap table if using linear mapping */
 	if (revmap_type == IRQ_HOST_MAP_LINEAR)
 		size += revmap_arg * sizeof(unsigned int);
-	host = zalloc_maybe_bootmem(size, GFP_KERNEL);
+	host = kzalloc(size, GFP_KERNEL);
 	if (host == NULL)
 		return NULL;
 
@@ -560,14 +586,14 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 			irq_map[i].host = host;
 			smp_wmb();
 
-			/* Clear norequest flags */
-			irq_clear_status_flags(i, IRQ_NOREQUEST);
-
 			/* Legacy flags are left to default at this point,
 			 * one can then use irq_create_mapping() to
 			 * explicitly change them
 			 */
 			ops->map(host, i, i);
+
+			/* Clear norequest flags */
+			irq_clear_status_flags(i, IRQ_NOREQUEST);
 		}
 		break;
 	case IRQ_HOST_MAP_LINEAR:
@@ -578,6 +604,9 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 		smp_wmb();
 		host->revmap_data.linear.revmap = rmap;
 		break;
+	case IRQ_HOST_MAP_TREE:
+		INIT_RADIX_TREE(&host->revmap_data.tree, GFP_KERNEL);
+		break;
 	default:
 		break;
 	}
@@ -635,8 +664,6 @@ static int irq_setup_virq(struct irq_host *host, unsigned int virq,
 		goto error;
 	}
 
-	irq_clear_status_flags(virq, IRQ_NOREQUEST);
-
 	/* map it */
 	smp_wmb();
 	irq_map[virq].hwirq = hwirq;
@@ -647,6 +674,8 @@ static int irq_setup_virq(struct irq_host *host, unsigned int virq,
 		goto errdesc;
 	}
 
+	irq_clear_status_flags(virq, IRQ_NOREQUEST);
+
 	return 0;
 
 errdesc:
@@ -703,8 +732,6 @@ unsigned int irq_create_mapping(struct irq_host *host,
 	 */
 	virq = irq_find_mapping(host, hwirq);
 	if (virq != NO_IRQ) {
-		if (host->ops->remap)
-			host->ops->remap(host, virq, hwirq);
 		pr_debug("irq: -> existing mapping on virq %d\n", virq);
 		return virq;
 	}
@@ -785,14 +812,15 @@ void irq_dispose_mapping(unsigned int virq)
 		return;
 
 	host = irq_map[virq].host;
-	WARN_ON (host == NULL);
-	if (host == NULL)
+	if (WARN_ON(host == NULL))
 		return;
 
 	/* Never unmap legacy interrupts */
 	if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
 		return;
 
+	irq_set_status_flags(virq, IRQ_NOREQUEST);
+
 	/* remove chip and handler */
 	irq_set_chip_and_handler(virq, NULL, NULL);
 
@@ -812,13 +840,6 @@ void irq_dispose_mapping(unsigned int virq)
 			host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
 		break;
 	case IRQ_HOST_MAP_TREE:
-		/*
-		 * Check if radix tree allocated yet, if not then nothing to
-		 * remove.
-		 */
-		smp_rmb();
-		if (revmap_trees_allocated < 1)
-			break;
 		mutex_lock(&revmap_trees_mutex);
 		radix_tree_delete(&host->revmap_data.tree, hwirq);
 		mutex_unlock(&revmap_trees_mutex);
@@ -829,8 +850,6 @@ void irq_dispose_mapping(unsigned int virq)
 	smp_mb();
 	irq_map[virq].hwirq = host->inval_irq;
 
-	irq_set_status_flags(virq, IRQ_NOREQUEST);
-
 	irq_free_descs(virq, 1);
 	/* Free it */
 	irq_free_virt(virq, 1);
@@ -876,16 +895,9 @@ unsigned int irq_radix_revmap_lookup(struct irq_host *host,
 	struct irq_map_entry *ptr;
 	unsigned int virq;
 
-	WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
-
-	/*
-	 * Check if the radix tree exists and has bee initialized.
-	 * If not, we fallback to slow mode
-	 */
-	if (revmap_trees_allocated < 2)
+	if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_TREE))
 		return irq_find_mapping(host, hwirq);
 
-	/* Now try to resolve */
 	/*
 	 * No rcu_read_lock(ing) needed, the ptr returned can't go under us
 	 * as it's referencing an entry in the static irq_map table.
@@ -908,16 +920,7 @@ unsigned int irq_radix_revmap_lookup(struct irq_host *host,
 void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
 			     irq_hw_number_t hwirq)
 {
-
-	WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
-
-	/*
-	 * Check if the radix tree exists yet.
-	 * If not, then the irq will be inserted into the tree when it gets
-	 * initialized.
-	 */
-	smp_rmb();
-	if (revmap_trees_allocated < 1)
+	if (WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE))
 		return;
 
 	if (virq != NO_IRQ) {
@@ -933,7 +936,8 @@ unsigned int irq_linear_revmap(struct irq_host *host,
 {
 	unsigned int *revmap;
 
-	WARN_ON(host->revmap_type != IRQ_HOST_MAP_LINEAR);
+	if (WARN_ON_ONCE(host->revmap_type != IRQ_HOST_MAP_LINEAR))
+		return irq_find_mapping(host, hwirq);
 
 	/* Check revmap bounds */
 	if (unlikely(hwirq >= host->revmap_data.linear.size))
@@ -1027,53 +1031,6 @@ int arch_early_irq_init(void)
 	return 0;
 }
 
-/* We need to create the radix trees late */
-static int irq_late_init(void)
-{
-	struct irq_host *h;
-	unsigned int i;
-
-	/*
-	 * No mutual exclusion with respect to accessors of the tree is needed
-	 * here as the synchronization is done via the state variable
-	 * revmap_trees_allocated.
-	 */
-	list_for_each_entry(h, &irq_hosts, link) {
-		if (h->revmap_type == IRQ_HOST_MAP_TREE)
-			INIT_RADIX_TREE(&h->revmap_data.tree, GFP_KERNEL);
-	}
-
-	/*
-	 * Make sure the radix trees inits are visible before setting
-	 * the flag
-	 */
-	smp_wmb();
-	revmap_trees_allocated = 1;
-
-	/*
-	 * Insert the reverse mapping for those interrupts already present
-	 * in irq_map[].
-	 */
-	mutex_lock(&revmap_trees_mutex);
-	for (i = 0; i < irq_virq_count; i++) {
-		if (irq_map[i].host &&
-		    (irq_map[i].host->revmap_type == IRQ_HOST_MAP_TREE))
-			radix_tree_insert(&irq_map[i].host->revmap_data.tree,
-					  irq_map[i].hwirq, &irq_map[i]);
-	}
-	mutex_unlock(&revmap_trees_mutex);
-
-	/*
-	 * Make sure the radix trees insertions are visible before setting
-	 * the flag
-	 */
-	smp_wmb();
-	revmap_trees_allocated = 2;
-
-	return 0;
-}
-arch_initcall(irq_late_init);
-
 #ifdef CONFIG_VIRQ_DEBUG
 static int virq_debug_show(struct seq_file *m, void *private)
 {
@@ -1081,10 +1038,11 @@ static int virq_debug_show(struct seq_file *m, void *private)
 	struct irq_desc *desc;
 	const char *p;
 	static const char none[] = "none";
+	void *data;
 	int i;
 
-	seq_printf(m, "%-5s  %-7s  %-15s  %s\n", "virq", "hwirq",
-		      "chip name", "host name");
+	seq_printf(m, "%-5s  %-7s  %-15s  %-18s  %s\n", "virq", "hwirq",
+		      "chip name", "chip data", "host name");
 
 	for (i = 1; i < nr_irqs; i++) {
 		desc = irq_to_desc(i);
@@ -1097,7 +1055,7 @@ static int virq_debug_show(struct seq_file *m, void *private)
 			struct irq_chip *chip;
 
 			seq_printf(m, "%5d  ", i);
-			seq_printf(m, "0x%05lx  ", virq_to_hw(i));
+			seq_printf(m, "0x%05lx  ", irq_map[i].hwirq);
 
 			chip = irq_desc_get_chip(desc);
 			if (chip && chip->name)
@@ -1106,6 +1064,9 @@ static int virq_debug_show(struct seq_file *m, void *private)
 				p = none;
 			seq_printf(m, "%-15s  ", p);
 
+			data = irq_desc_get_chip_data(desc);
+			seq_printf(m, "0x%16p  ", data);
+
 			if (irq_map[i].host && irq_map[i].host->of_node)
 				p = irq_map[i].host->of_node->full_name;
 			else
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 42850ee00ad..bd9d35f59cf 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -109,7 +109,7 @@ static int kgdb_call_nmi_hook(struct pt_regs *regs)
 #ifdef CONFIG_SMP
 void kgdb_roundup_cpus(unsigned long flags)
 {
-	smp_send_debugger_break(MSG_ALL_BUT_SELF);
+	smp_send_debugger_break();
 }
 #endif
 
diff --git a/arch/powerpc/kernel/l2cr_6xx.S b/arch/powerpc/kernel/l2cr_6xx.S
index 2a2f3c3f6d8..97ec8557f97 100644
--- a/arch/powerpc/kernel/l2cr_6xx.S
+++ b/arch/powerpc/kernel/l2cr_6xx.S
@@ -151,7 +151,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	 /**** Might be a good idea to set L2DO here - to prevent instructions
 	       from getting into the cache.  But since we invalidate
 	       the next time we enable the cache it doesn't really matter.
-	       Don't do this unless you accomodate all processor variations.
+	       Don't do this unless you accommodate all processor variations.
 	       The bit moved on the 7450.....
 	  ****/
 
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index c834757bebc..2b97b80d6d7 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -330,9 +330,11 @@ void __init find_legacy_serial_ports(void)
 		if (!parent)
 			continue;
 		if (of_match_node(legacy_serial_parents, parent) != NULL) {
-			index = add_legacy_soc_port(np, np);
-			if (index >= 0 && np == stdout)
-				legacy_serial_console = index;
+			if (of_device_is_available(np)) {
+				index = add_legacy_soc_port(np, np);
+				if (index >= 0 && np == stdout)
+					legacy_serial_console = index;
+			}
 		}
 		of_node_put(parent);
 	}
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 16468362ad5..84daabe2fcb 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -132,34 +132,6 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-/**
- * h_get_mpp
- * H_GET_MPP hcall returns info in 7 parms
- */
-int h_get_mpp(struct hvcall_mpp_data *mpp_data)
-{
-	int rc;
-	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
-
-	rc = plpar_hcall9(H_GET_MPP, retbuf);
-
-	mpp_data->entitled_mem = retbuf[0];
-	mpp_data->mapped_mem = retbuf[1];
-
-	mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
-	mpp_data->pool_num = retbuf[2] & 0xffff;
-
-	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
-	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
-	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
-
-	mpp_data->pool_size = retbuf[4];
-	mpp_data->loan_request = retbuf[5];
-	mpp_data->backing_mem = retbuf[6];
-
-	return rc;
-}
-EXPORT_SYMBOL(h_get_mpp);
 
 struct hvcall_ppp_data {
 	u64	entitlement;
@@ -262,7 +234,7 @@ static void parse_ppp_data(struct seq_file *m)
 	seq_printf(m, "system_active_processors=%d\n",
 	           ppp_data.active_system_procs);
 
-	/* pool related entries are apropriate for shared configs */
+	/* pool related entries are appropriate for shared configs */
 	if (lppaca_of(0).shared_proc) {
 		unsigned long pool_idle_time, pool_procs;
 
@@ -345,6 +317,30 @@ static void parse_mpp_data(struct seq_file *m)
 	seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
 }
 
+/**
+ * parse_mpp_x_data
+ * Parse out data returned from h_get_mpp_x
+ */
+static void parse_mpp_x_data(struct seq_file *m)
+{
+	struct hvcall_mpp_x_data mpp_x_data;
+
+	if (!firmware_has_feature(FW_FEATURE_XCMO))
+		return;
+	if (h_get_mpp_x(&mpp_x_data))
+		return;
+
+	seq_printf(m, "coalesced_bytes=%ld\n", mpp_x_data.coalesced_bytes);
+
+	if (mpp_x_data.pool_coalesced_bytes)
+		seq_printf(m, "pool_coalesced_bytes=%ld\n",
+			   mpp_x_data.pool_coalesced_bytes);
+	if (mpp_x_data.pool_purr_cycles)
+		seq_printf(m, "coalesce_pool_purr=%ld\n", mpp_x_data.pool_purr_cycles);
+	if (mpp_x_data.pool_spurr_cycles)
+		seq_printf(m, "coalesce_pool_spurr=%ld\n", mpp_x_data.pool_spurr_cycles);
+}
+
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
 #define SPLPAR_MAXLENGTH 1026*(sizeof(char))
 
@@ -520,6 +516,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 		parse_system_parameter_string(m);
 		parse_ppp_data(m);
 		parse_mpp_data(m);
+		parse_mpp_x_data(m);
 		pseries_cmo_data(m);
 		splpar_dispatch_data(m);
 
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 094bd9821ad..402560e957b 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -694,6 +694,17 @@ _GLOBAL(kernel_thread)
 	addi	r1,r1,16
 	blr
 
+#ifdef CONFIG_SMP
+_GLOBAL(start_secondary_resume)
+	/* Reset stack */
+	rlwinm	r1,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	li	r3,0
+	std	r3,0(r1)		/* Zero the stack frame pointer	*/
+	bl	start_secondary
+	b	.
+#endif /* CONFIG_SMP */
+	
 /*
  * This routine is just here to keep GCC happy - sigh...
  */
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 206a321a71d..e89df59cdc5 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -462,7 +462,8 @@ _GLOBAL(disable_kernel_fp)
  * wait for the flag to change, indicating this kernel is going away but
  * the slave code for the next one is at addresses 0 to 100.
  *
- * This is used by all slaves.
+ * This is used by all slaves, even those that did not find a matching
+ * paca in the secondary startup code.
  *
  * Physical (hardware) cpu id should be in r3.
  */
@@ -471,10 +472,6 @@ _GLOBAL(kexec_wait)
 1:	mflr	r5
 	addi	r5,r5,kexec_flag-1b
 
-	li	r4,KEXEC_STATE_REAL_MODE
-	stb	r4,PACAKEXECSTATE(r13)
-	SYNC
-
 99:	HMT_LOW
 #ifdef CONFIG_KEXEC		/* use no memory without kexec */
 	lwz	r4,0(r5)
@@ -499,11 +496,17 @@ kexec_flag:
  *
  * get phys id from paca
  * switch to real mode
+ * mark the paca as no longer used
  * join other cpus in kexec_wait(phys_id)
  */
 _GLOBAL(kexec_smp_wait)
 	lhz	r3,PACAHWCPUID(r13)
 	bl	real_mode
+
+	li	r4,KEXEC_STATE_REAL_MODE
+	stb	r4,PACAKEXECSTATE(r13)
+	SYNC
+
 	b	.kexec_wait
 
 /*
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index f4adf89d761..efeb8818418 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -7,7 +7,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#include <linux/threads.h>
+#include <linux/smp.h>
 #include <linux/module.h>
 #include <linux/memblock.h>
 
@@ -156,18 +156,29 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
 /* Put the paca pointer into r13 and SPRG_PACA */
 void setup_paca(struct paca_struct *new_paca)
 {
+	/* Setup r13 */
 	local_paca = new_paca;
-	mtspr(SPRN_SPRG_PACA, local_paca);
+
 #ifdef CONFIG_PPC_BOOK3E
+	/* On Book3E, initialize the TLB miss exception frames */
 	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
+#else
+	/* In HV mode, we setup both HPACA and PACA to avoid problems
+	 * if we do a GET_PACA() before the feature fixups have been
+	 * applied
+	 */
+	if (cpu_has_feature(CPU_FTR_HVMODE_206))
+		mtspr(SPRN_SPRG_HPACA, local_paca);
 #endif
+	mtspr(SPRN_SPRG_PACA, local_paca);
+
 }
 
 static int __initdata paca_size;
 
 void __init allocate_pacas(void)
 {
-	int nr_cpus, cpu, limit;
+	int cpu, limit;
 
 	/*
 	 * We can't take SLB misses on the paca, and we want to access them
@@ -179,23 +190,18 @@ void __init allocate_pacas(void)
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		limit = min(limit, HvPagesToMap * HVPAGESIZE);
 
-	nr_cpus = NR_CPUS;
-	/* On iSeries we know we can never have more than 64 cpus */
-	if (firmware_has_feature(FW_FEATURE_ISERIES))
-		nr_cpus = min(64, nr_cpus);
-
-	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
+	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids);
 
 	paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
 	memset(paca, 0, paca_size);
 
 	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
-		paca_size, nr_cpus, paca);
+		paca_size, nr_cpu_ids, paca);
 
-	allocate_lppacas(nr_cpus, limit);
+	allocate_lppacas(nr_cpu_ids, limit);
 
 	/* Can't use for_each_*_cpu, as they aren't functional yet */
-	for (cpu = 0; cpu < nr_cpus; cpu++)
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
 		initialise_paca(&paca[cpu], cpu);
 }
 
@@ -203,7 +209,7 @@ void __init free_unused_pacas(void)
 {
 	int new_size;
 
-	new_size = PAGE_ALIGN(sizeof(struct paca_struct) * num_possible_cpus());
+	new_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids);
 
 	if (new_size >= paca_size)
 		return;
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index d225d99fe39..6baabc13306 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -43,10 +43,9 @@ void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 	const u32 *regs;
 	struct pci_dn *pdn;
 
-	pdn = alloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
+	pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
 	if (pdn == NULL)
 		return NULL;
-	memset(pdn, 0, sizeof(*pdn));
 	dn->data = pdn;
 	pdn->node = dn;
 	pdn->phb = phb;
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 97e0ae41494..822f63008ae 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -398,6 +398,25 @@ static int check_excludes(struct perf_event **ctrs, unsigned int cflags[],
 	return 0;
 }
 
+static u64 check_and_compute_delta(u64 prev, u64 val)
+{
+	u64 delta = (val - prev) & 0xfffffffful;
+
+	/*
+	 * POWER7 can roll back counter values, if the new value is smaller
+	 * than the previous value it will cause the delta and the counter to
+	 * have bogus values unless we rolled a counter over.  If a coutner is
+	 * rolled back, it will be smaller, but within 256, which is the maximum
+	 * number of events to rollback at once.  If we dectect a rollback
+	 * return 0.  This can lead to a small lack of precision in the
+	 * counters.
+	 */
+	if (prev > val && (prev - val) < 256)
+		delta = 0;
+
+	return delta;
+}
+
 static void power_pmu_read(struct perf_event *event)
 {
 	s64 val, delta, prev;
@@ -416,10 +435,11 @@ static void power_pmu_read(struct perf_event *event)
 		prev = local64_read(&event->hw.prev_count);
 		barrier();
 		val = read_pmc(event->hw.idx);
+		delta = check_and_compute_delta(prev, val);
+		if (!delta)
+			return;
 	} while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
 
-	/* The counters are only 32 bits wide */
-	delta = (val - prev) & 0xfffffffful;
 	local64_add(delta, &event->count);
 	local64_sub(delta, &event->hw.period_left);
 }
@@ -449,8 +469,9 @@ static void freeze_limited_counters(struct cpu_hw_events *cpuhw,
 		val = (event->hw.idx == 5) ? pmc5 : pmc6;
 		prev = local64_read(&event->hw.prev_count);
 		event->hw.idx = 0;
-		delta = (val - prev) & 0xfffffffful;
-		local64_add(delta, &event->count);
+		delta = check_and_compute_delta(prev, val);
+		if (delta)
+			local64_add(delta, &event->count);
 	}
 }
 
@@ -458,14 +479,16 @@ static void thaw_limited_counters(struct cpu_hw_events *cpuhw,
 				  unsigned long pmc5, unsigned long pmc6)
 {
 	struct perf_event *event;
-	u64 val;
+	u64 val, prev;
 	int i;
 
 	for (i = 0; i < cpuhw->n_limited; ++i) {
 		event = cpuhw->limited_counter[i];
 		event->hw.idx = cpuhw->limited_hwidx[i];
 		val = (event->hw.idx == 5) ? pmc5 : pmc6;
-		local64_set(&event->hw.prev_count, val);
+		prev = local64_read(&event->hw.prev_count);
+		if (check_and_compute_delta(prev, val))
+			local64_set(&event->hw.prev_count, val);
 		perf_event_update_userpage(event);
 	}
 }
@@ -759,7 +782,7 @@ static int power_pmu_add(struct perf_event *event, int ef_flags)
 
 	/*
 	 * If group events scheduling transaction was started,
-	 * skip the schedulability test here, it will be peformed
+	 * skip the schedulability test here, it will be performed
 	 * at commit time(->commit_txn) as a whole
 	 */
 	if (cpuhw->group_flag & PERF_EVENT_TXN)
@@ -1197,7 +1220,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 
 	/* we don't have to worry about interrupts here */
 	prev = local64_read(&event->hw.prev_count);
-	delta = (val - prev) & 0xfffffffful;
+	delta = check_and_compute_delta(prev, val);
 	local64_add(delta, &event->count);
 
 	/*
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index ef3ef566235..7d28f540200 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -54,7 +54,6 @@ extern void single_step_exception(struct pt_regs *regs);
 extern int sys_sigreturn(struct pt_regs *regs);
 
 EXPORT_SYMBOL(clear_pages);
-EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);
 EXPORT_SYMBOL(DMA_MODE_WRITE);
@@ -88,9 +87,7 @@ EXPORT_SYMBOL(__copy_tofrom_user);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__strnlen_user);
-#ifdef CONFIG_PPC64
-EXPORT_SYMBOL(copy_4K_page);
-#endif
+EXPORT_SYMBOL(copy_page);
 
 #if defined(CONFIG_PCI) && defined(CONFIG_PPC32)
 EXPORT_SYMBOL(isa_io_base);
diff --git a/arch/powerpc/kernel/ppc_save_regs.S b/arch/powerpc/kernel/ppc_save_regs.S
index e83ba3f078e..1b1787d5289 100644
--- a/arch/powerpc/kernel/ppc_save_regs.S
+++ b/arch/powerpc/kernel/ppc_save_regs.S
@@ -15,7 +15,7 @@
 
 /*
  * Grab the register values as they are now.
- * This won't do a particularily good job because we really
+ * This won't do a particularly good job because we really
  * want our caller's caller's registers, and our caller has
  * already executed its prologue.
  * ToDo: We could reach back into the caller's save area to do
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index f74f355a961..095043d7994 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -702,6 +702,8 @@ void prepare_to_copy(struct task_struct *tsk)
 /*
  * Copy a thread..
  */
+extern unsigned long dscr_default; /* defined in arch/powerpc/kernel/sysfs.c */
+
 int copy_thread(unsigned long clone_flags, unsigned long usp,
 		unsigned long unused, struct task_struct *p,
 		struct pt_regs *regs)
@@ -755,11 +757,11 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 				_ALIGN_UP(sizeof(struct thread_info), 16);
 
 #ifdef CONFIG_PPC_STD_MMU_64
-	if (cpu_has_feature(CPU_FTR_SLB)) {
+	if (mmu_has_feature(MMU_FTR_SLB)) {
 		unsigned long sp_vsid;
 		unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
 
-		if (cpu_has_feature(CPU_FTR_1T_SEGMENT))
+		if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
 			sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T)
 				<< SLB_VSID_SHIFT_1T;
 		else
@@ -769,6 +771,20 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		p->thread.ksp_vsid = sp_vsid;
 	}
 #endif /* CONFIG_PPC_STD_MMU_64 */
+#ifdef CONFIG_PPC64 
+	if (cpu_has_feature(CPU_FTR_DSCR)) {
+		if (current->thread.dscr_inherit) {
+			p->thread.dscr_inherit = 1;
+			p->thread.dscr = current->thread.dscr;
+		} else if (0 != dscr_default) {
+			p->thread.dscr_inherit = 1;
+			p->thread.dscr = dscr_default;
+		} else {
+			p->thread.dscr_inherit = 0;
+			p->thread.dscr = 0;
+		}
+	}
+#endif
 
 	/*
 	 * The PPC64 ABI makes use of a TOC to contain function 
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 05b7139d6a2..48aeb55faae 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -68,6 +68,7 @@ int __initdata iommu_force_on;
 unsigned long tce_alloc_start, tce_alloc_end;
 u64 ppc64_rma_size;
 #endif
+static phys_addr_t first_memblock_size;
 
 static int __init early_parse_mem(char *p)
 {
@@ -123,18 +124,19 @@ static void __init move_device_tree(void)
  */
 static struct ibm_pa_feature {
 	unsigned long	cpu_features;	/* CPU_FTR_xxx bit */
+	unsigned long	mmu_features;	/* MMU_FTR_xxx bit */
 	unsigned int	cpu_user_ftrs;	/* PPC_FEATURE_xxx bit */
 	unsigned char	pabyte;		/* byte number in ibm,pa-features */
 	unsigned char	pabit;		/* bit number (big-endian) */
 	unsigned char	invert;		/* if 1, pa bit set => clear feature */
 } ibm_pa_features[] __initdata = {
-	{0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
-	{0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
-	{CPU_FTR_SLB, 0,		0, 2, 0},
-	{CPU_FTR_CTRL, 0,		0, 3, 0},
-	{CPU_FTR_NOEXECUTE, 0,		0, 6, 0},
-	{CPU_FTR_NODSISRALIGN, 0,	1, 1, 1},
-	{CPU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
+	{0, 0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
+	{0, 0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
+	{0, MMU_FTR_SLB, 0,		0, 2, 0},
+	{CPU_FTR_CTRL, 0, 0,		0, 3, 0},
+	{CPU_FTR_NOEXECUTE, 0, 0,	0, 6, 0},
+	{CPU_FTR_NODSISRALIGN, 0, 0,	1, 1, 1},
+	{0, MMU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
 	{CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
 };
 
@@ -166,9 +168,11 @@ static void __init scan_features(unsigned long node, unsigned char *ftrs,
 		if (bit ^ fp->invert) {
 			cur_cpu_spec->cpu_features |= fp->cpu_features;
 			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+			cur_cpu_spec->mmu_features |= fp->mmu_features;
 		} else {
 			cur_cpu_spec->cpu_features &= ~fp->cpu_features;
 			cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+			cur_cpu_spec->mmu_features &= ~fp->mmu_features;
 		}
 	}
 }
@@ -268,13 +272,13 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 					  const char *uname, int depth,
 					  void *data)
 {
-	static int logical_cpuid = 0;
 	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
 	const u32 *prop;
 	const u32 *intserv;
 	int i, nthreads;
 	unsigned long len;
-	int found = 0;
+	int found = -1;
+	int found_thread = 0;
 
 	/* We are scanning "cpu" nodes only */
 	if (type == NULL || strcmp(type, "cpu") != 0)
@@ -298,11 +302,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 		 * version 2 of the kexec param format adds the phys cpuid of
 		 * booted proc.
 		 */
-		if (initial_boot_params && initial_boot_params->version >= 2) {
-			if (intserv[i] ==
-					initial_boot_params->boot_cpuid_phys) {
-				found = 1;
-				break;
+		if (initial_boot_params->version >= 2) {
+			if (intserv[i] == initial_boot_params->boot_cpuid_phys) {
+				found = boot_cpu_count;
+				found_thread = i;
 			}
 		} else {
 			/*
@@ -311,23 +314,20 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 			 * off secondary threads.
 			 */
 			if (of_get_flat_dt_prop(node,
-					"linux,boot-cpu", NULL) != NULL) {
-				found = 1;
-				break;
-			}
+					"linux,boot-cpu", NULL) != NULL)
+				found = boot_cpu_count;
 		}
-
 #ifdef CONFIG_SMP
 		/* logical cpu id is always 0 on UP kernels */
-		logical_cpuid++;
+		boot_cpu_count++;
 #endif
 	}
 
-	if (found) {
-		DBG("boot cpu: logical %d physical %d\n", logical_cpuid,
-			intserv[i]);
-		boot_cpuid = logical_cpuid;
-		set_hard_smp_processor_id(boot_cpuid, intserv[i]);
+	if (found >= 0) {
+		DBG("boot cpu: logical %d physical %d\n", found,
+			intserv[found_thread]);
+		boot_cpuid = found;
+		set_hard_smp_processor_id(found, intserv[found_thread]);
 
 		/*
 		 * PAPR defines "logical" PVR values for cpus that
@@ -509,11 +509,14 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 			size = 0x80000000ul - base;
 	}
 #endif
-
-	/* First MEMBLOCK added, do some special initializations */
-	if (memstart_addr == ~(phys_addr_t)0)
-		setup_initial_memory_limit(base, size);
-	memstart_addr = min((u64)memstart_addr, base);
+	/* Keep track of the beginning of memory -and- the size of
+	 * the very first block in the device-tree as it represents
+	 * the RMA on ppc64 server
+	 */
+	if (base < memstart_addr) {
+		memstart_addr = base;
+		first_memblock_size = size;
+	}
 
 	/* Add the chunk to the MEMBLOCK list */
 	memblock_add(base, size);
@@ -683,7 +686,7 @@ void __init early_init_devtree(void *params)
 #endif
 
 #ifdef CONFIG_PHYP_DUMP
-	/* scan tree to see if dump occured during last boot */
+	/* scan tree to see if dump occurred during last boot */
 	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
 #endif
 
@@ -698,6 +701,7 @@ void __init early_init_devtree(void *params)
 
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
+	setup_initial_memory_limit(memstart_addr, first_memblock_size);
 
 	/* Save command line for /proc/cmdline and then parse parameters */
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
@@ -739,7 +743,7 @@ void __init early_init_devtree(void *params)
 
 	DBG("Scanning CPUs ...\n");
 
-	/* Retreive CPU related informations from the flat tree
+	/* Retrieve CPU related informations from the flat tree
 	 * (altivec support, boot CPU ID, ...)
 	 */
 	of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 941ff4dbc56..c016033ba78 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -335,6 +335,7 @@ static void __init prom_printf(const char *format, ...)
 	const char *p, *q, *s;
 	va_list args;
 	unsigned long v;
+	long vs;
 	struct prom_t *_prom = &RELOC(prom);
 
 	va_start(args, format);
@@ -368,12 +369,35 @@ static void __init prom_printf(const char *format, ...)
 			v = va_arg(args, unsigned long);
 			prom_print_hex(v);
 			break;
+		case 'd':
+			++q;
+			vs = va_arg(args, int);
+			if (vs < 0) {
+				prom_print(RELOC("-"));
+				vs = -vs;
+			}
+			prom_print_dec(vs);
+			break;
 		case 'l':
 			++q;
-			if (*q == 'u') { /* '%lu' */
+			if (*q == 0)
+				break;
+			else if (*q == 'x') {
+				++q;
+				v = va_arg(args, unsigned long);
+				prom_print_hex(v);
+			} else if (*q == 'u') { /* '%lu' */
 				++q;
 				v = va_arg(args, unsigned long);
 				prom_print_dec(v);
+			} else if (*q == 'd') { /* %ld */
+				++q;
+				vs = va_arg(args, long);
+				if (vs < 0) {
+					prom_print(RELOC("-"));
+					vs = -vs;
+				}
+				prom_print_dec(vs);
 			}
 			break;
 		}
@@ -676,8 +700,10 @@ static void __init early_cmdline_parse(void)
 #endif /* CONFIG_PCI_MSI */
 #ifdef CONFIG_PPC_SMLPAR
 #define OV5_CMO			0x80	/* Cooperative Memory Overcommitment */
+#define OV5_XCMO			0x40	/* Page Coalescing */
 #else
 #define OV5_CMO			0x00
+#define OV5_XCMO			0x00
 #endif
 #define OV5_TYPE1_AFFINITY	0x80	/* Type 1 NUMA affinity */
 
@@ -732,7 +758,7 @@ static unsigned char ibm_architecture_vec[] = {
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,
 	0,
-	OV5_CMO,
+	OV5_CMO | OV5_XCMO,
 	OV5_TYPE1_AFFINITY,
 	0,
 	0,
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 895b082f1e4..a6ae1cfad86 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -463,7 +463,7 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
 #ifdef CONFIG_VSX
 /*
  * Currently to set and and get all the vsx state, you need to call
- * the fp and VMX calls aswell.  This only get/sets the lower 32
+ * the fp and VMX calls as well.  This only get/sets the lower 32
  * 128bit VSX registers.
  */
 
@@ -933,12 +933,16 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
+	if (ptrace_get_breakpoints(task) < 0)
+		return -ESRCH;
+
 	bp = thread->ptrace_bps[0];
 	if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) {
 		if (bp) {
 			unregister_hw_breakpoint(bp);
 			thread->ptrace_bps[0] = NULL;
 		}
+		ptrace_put_breakpoints(task);
 		return 0;
 	}
 	if (bp) {
@@ -948,9 +952,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 					(DABR_DATA_WRITE | DABR_DATA_READ),
 							&attr.bp_type);
 		ret =  modify_user_hw_breakpoint(bp, &attr);
-		if (ret)
+		if (ret) {
+			ptrace_put_breakpoints(task);
 			return ret;
+		}
 		thread->ptrace_bps[0] = bp;
+		ptrace_put_breakpoints(task);
 		thread->dabr = data;
 		return 0;
 	}
@@ -965,9 +972,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 							ptrace_triggered, task);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
+		ptrace_put_breakpoints(task);
 		return PTR_ERR(bp);
 	}
 
+	ptrace_put_breakpoints(task);
+
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
 	/* Move contents to the DABR register */
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 2097f2b3cba..271ff6318ed 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -42,6 +42,7 @@
 #include <asm/time.h>
 #include <asm/mmu.h>
 #include <asm/topology.h>
+#include <asm/pSeries_reconfig.h>
 
 struct rtas_t rtas = {
 	.lock = __ARCH_SPIN_LOCK_UNLOCKED
@@ -494,7 +495,7 @@ unsigned int rtas_busy_delay(int status)
 
 	might_sleep();
 	ms = rtas_busy_delay_time(status);
-	if (ms)
+	if (ms && need_resched())
 		msleep(ms);
 
 	return ms;
@@ -731,6 +732,7 @@ static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_w
 
 	atomic_set(&data->error, rc);
 	start_topology_update();
+	pSeries_coalesce_init();
 
 	if (wake_when_done) {
 		atomic_set(&data->done, 1);
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 7980ec0e1e1..67f6c3b5135 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -465,7 +465,7 @@ static void start_event_scan(void)
 	pr_debug("rtasd: will sleep for %d milliseconds\n",
 		 (30000 / rtas_event_scan_rate));
 
-	/* Retreive errors from nvram if any */
+	/* Retrieve errors from nvram if any */
 	retreive_nvram_error_log();
 
 	schedule_delayed_work_on(cpumask_first(cpu_online_mask),
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 9d4882a4664..79fca2651b6 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -381,7 +381,7 @@ static void __init cpu_init_thread_core_maps(int tpc)
 	int i;
 
 	threads_per_core = tpc;
-	threads_core_mask = CPU_MASK_NONE;
+	cpumask_clear(&threads_core_mask);
 
 	/* This implementation only supports power of 2 number of threads
 	 * for simplicity and performance
@@ -390,7 +390,7 @@ static void __init cpu_init_thread_core_maps(int tpc)
 	BUG_ON(tpc != (1 << threads_shift));
 
 	for (i = 0; i < tpc; i++)
-		cpu_set(i, threads_core_mask);
+		cpumask_set_cpu(i, &threads_core_mask);
 
 	printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n",
 	       tpc, tpc > 1 ? "s" : "");
@@ -404,7 +404,7 @@ static void __init cpu_init_thread_core_maps(int tpc)
  *                  cpu_present_mask
  *
  * Having the possible map set up early allows us to restrict allocations
- * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
+ * of things like irqstacks to nr_cpu_ids rather than NR_CPUS.
  *
  * We do not initialize the online map here; cpus set their own bits in
  * cpu_online_mask as they come up.
@@ -424,7 +424,7 @@ void __init smp_setup_cpu_maps(void)
 
 	DBG("smp_setup_cpu_maps()\n");
 
-	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
+	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < nr_cpu_ids) {
 		const int *intserv;
 		int j, len;
 
@@ -443,7 +443,7 @@ void __init smp_setup_cpu_maps(void)
 				intserv = &cpu;	/* assume logical == phys */
 		}
 
-		for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
+		for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
 			DBG("    thread %d -> cpu %d (hard id %d)\n",
 			    j, cpu, intserv[j]);
 			set_cpu_present(cpu, true);
@@ -483,12 +483,12 @@ void __init smp_setup_cpu_maps(void)
 		if (cpu_has_feature(CPU_FTR_SMT))
 			maxcpus *= nthreads;
 
-		if (maxcpus > NR_CPUS) {
+		if (maxcpus > nr_cpu_ids) {
 			printk(KERN_WARNING
 			       "Partition configured for %d cpus, "
 			       "operating system maximum is %d.\n",
-			       maxcpus, NR_CPUS);
-			maxcpus = NR_CPUS;
+			       maxcpus, nr_cpu_ids);
+			maxcpus = nr_cpu_ids;
 		} else
 			printk(KERN_INFO "Partition configured for %d cpus.\n",
 			       maxcpus);
@@ -509,6 +509,9 @@ void __init smp_setup_cpu_maps(void)
 	 */
 	cpu_init_thread_core_maps(nthreads);
 
+	/* Now that possible cpus are set, set nr_cpu_ids for later use */
+	setup_nr_cpu_ids();
+
 	free_unused_pacas();
 }
 #endif /* CONFIG_SMP */
@@ -599,6 +602,10 @@ int check_legacy_ioport(unsigned long base_port)
 		 * name instead */
 		if (!np)
 			np = of_find_node_by_name(NULL, "8042");
+		if (np) {
+			of_i8042_kbd_irq = 1;
+			of_i8042_aux_irq = 12;
+		}
 		break;
 	case FDC_BASE: /* FDC1 */
 		np = of_find_node_by_type(NULL, "fdc");
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d2fbc90530..620d792b52e 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -48,6 +48,7 @@ extern void bootx_init(unsigned long r4, unsigned long phys);
 
 int boot_cpuid = -1;
 EXPORT_SYMBOL_GPL(boot_cpuid);
+int __initdata boot_cpu_count;
 int boot_cpuid_phys;
 
 int smp_hw_index[NR_CPUS];
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 5a0401fcaeb..a88bf2713d4 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -62,6 +62,7 @@
 #include <asm/udbg.h>
 #include <asm/kexec.h>
 #include <asm/mmu_context.h>
+#include <asm/code-patching.h>
 
 #include "setup.h"
 
@@ -72,6 +73,7 @@
 #endif
 
 int boot_cpuid = 0;
+int __initdata boot_cpu_count;
 u64 ppc64_pft_size;
 
 /* Pick defaults since we might want to patch instructions
@@ -233,6 +235,7 @@ void early_setup_secondary(void)
 void smp_release_cpus(void)
 {
 	unsigned long *ptr;
+	int i;
 
 	DBG(" -> smp_release_cpus()\n");
 
@@ -245,7 +248,16 @@ void smp_release_cpus(void)
 	ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
 			- PHYSICAL_START);
 	*ptr = __pa(generic_secondary_smp_init);
-	mb();
+
+	/* And wait a bit for them to catch up */
+	for (i = 0; i < 100000; i++) {
+		mb();
+		HMT_low();
+		if (boot_cpu_count == 0)
+			break;
+		udelay(1);
+	}
+	DBG("boot_cpu_count = %d\n", boot_cpu_count);
 
 	DBG(" <- smp_release_cpus()\n");
 }
@@ -423,17 +435,30 @@ void __init setup_system(void)
 	DBG(" <- setup_system()\n");
 }
 
-static u64 slb0_limit(void)
+/* This returns the limit below which memory accesses to the linear
+ * mapping are guarnateed not to cause a TLB or SLB miss. This is
+ * used to allocate interrupt or emergency stacks for which our
+ * exception entry path doesn't deal with being interrupted.
+ */
+static u64 safe_stack_limit(void)
 {
-	if (cpu_has_feature(CPU_FTR_1T_SEGMENT)) {
+#ifdef CONFIG_PPC_BOOK3E
+	/* Freescale BookE bolts the entire linear mapping */
+	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
+		return linear_map_top;
+	/* Other BookE, we assume the first GB is bolted */
+	return 1ul << 30;
+#else
+	/* BookS, the first segment is bolted */
+	if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
 		return 1UL << SID_SHIFT_1T;
-	}
 	return 1UL << SID_SHIFT;
+#endif
 }
 
 static void __init irqstack_early_init(void)
 {
-	u64 limit = slb0_limit();
+	u64 limit = safe_stack_limit();
 	unsigned int i;
 
 	/*
@@ -453,6 +478,9 @@ static void __init irqstack_early_init(void)
 #ifdef CONFIG_PPC_BOOK3E
 static void __init exc_lvl_early_init(void)
 {
+	extern unsigned int interrupt_base_book3e;
+	extern unsigned int exc_debug_debug_book3e;
+
 	unsigned int i;
 
 	for_each_possible_cpu(i) {
@@ -463,6 +491,10 @@ static void __init exc_lvl_early_init(void)
 		mcheckirq_ctx[i] = (struct thread_info *)
 			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
+
+	if (cpu_has_feature(CPU_FTR_DEBUG_LVL_EXC))
+		patch_branch(&interrupt_base_book3e + (0x040 / 4) + 1,
+			     (unsigned long)&exc_debug_debug_book3e, 0);
 }
 #else
 #define exc_lvl_early_init()
@@ -486,7 +518,7 @@ static void __init emergency_stack_init(void)
 	 * bringup, we need to get at them in real mode. This means they
 	 * must also be within the RMO region.
 	 */
-	limit = min(slb0_limit(), ppc64_rma_size);
+	limit = min(safe_stack_limit(), ppc64_rma_size);
 
 	for_each_possible_cpu(i) {
 		unsigned long sp;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 27c4a4584f8..da989fff19c 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -381,7 +381,7 @@ badframe:
 	       regs, uc, &uc->uc_mcontext);
 #endif
 	if (show_unhandled_signals && printk_ratelimit())
-		printk(regs->msr & MSR_SF ? fmt64 : fmt32,
+		printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
 			current->comm, current->pid, "rt_sigreturn",
 			(long)uc, regs->nip, regs->link);
 
@@ -469,7 +469,7 @@ badframe:
 	       regs, frame, newsp);
 #endif
 	if (show_unhandled_signals && printk_ratelimit())
-		printk(regs->msr & MSR_SF ? fmt64 : fmt32,
+		printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
 			current->comm, current->pid, "setup_rt_frame",
 			(long)frame, regs->nip, regs->link);
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 98136050917..4a6f2ec7e76 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -57,6 +57,25 @@
 #define DBG(fmt...)
 #endif
 
+
+/* Store all idle threads, this can be reused instead of creating
+* a new thread. Also avoids complicated thread destroy functionality
+* for idle threads.
+*/
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
+ * removed after init for !CONFIG_HOTPLUG_CPU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
+#define get_idle_for_cpu(x)      (per_cpu(idle_thread_array, x))
+#define set_idle_for_cpu(x, p)   (per_cpu(idle_thread_array, x) = (p))
+#else
+static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+#define get_idle_for_cpu(x)      (idle_thread_array[(x)])
+#define set_idle_for_cpu(x, p)   (idle_thread_array[(x)] = (p))
+#endif
+
 struct thread_info *secondary_ti;
 
 DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
@@ -76,7 +95,7 @@ int smt_enabled_at_boot = 1;
 static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
 
 #ifdef CONFIG_PPC64
-void __devinit smp_generic_kick_cpu(int nr)
+int __devinit smp_generic_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
 
@@ -87,37 +106,10 @@ void __devinit smp_generic_kick_cpu(int nr)
 	 */
 	paca[nr].cpu_start = 1;
 	smp_mb();
-}
-#endif
 
-void smp_message_recv(int msg)
-{
-	switch(msg) {
-	case PPC_MSG_CALL_FUNCTION:
-		generic_smp_call_function_interrupt();
-		break;
-	case PPC_MSG_RESCHEDULE:
-		/* we notice need_resched on exit */
-		break;
-	case PPC_MSG_CALL_FUNC_SINGLE:
-		generic_smp_call_function_single_interrupt();
-		break;
-	case PPC_MSG_DEBUGGER_BREAK:
-		if (crash_ipi_function_ptr) {
-			crash_ipi_function_ptr(get_irq_regs());
-			break;
-		}
-#ifdef CONFIG_DEBUGGER
-		debugger_ipi(get_irq_regs());
-		break;
-#endif /* CONFIG_DEBUGGER */
-		/* FALLTHROUGH */
-	default:
-		printk("SMP %d: smp_message_recv(): unknown msg %d\n",
-		       smp_processor_id(), msg);
-		break;
-	}
+	return 0;
 }
+#endif
 
 static irqreturn_t call_function_action(int irq, void *data)
 {
@@ -127,7 +119,7 @@ static irqreturn_t call_function_action(int irq, void *data)
 
 static irqreturn_t reschedule_action(int irq, void *data)
 {
-	/* we just need the return path side effect of checking need_resched */
+	scheduler_ipi();
 	return IRQ_HANDLED;
 }
 
@@ -137,9 +129,17 @@ static irqreturn_t call_function_single_action(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t debug_ipi_action(int irq, void *data)
+irqreturn_t debug_ipi_action(int irq, void *data)
 {
-	smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
+	if (crash_ipi_function_ptr) {
+		crash_ipi_function_ptr(get_irq_regs());
+		return IRQ_HANDLED;
+	}
+
+#ifdef CONFIG_DEBUGGER
+	debugger_ipi(get_irq_regs());
+#endif /* CONFIG_DEBUGGER */
+
 	return IRQ_HANDLED;
 }
 
@@ -178,6 +178,66 @@ int smp_request_message_ipi(int virq, int msg)
 	return err;
 }
 
+#ifdef CONFIG_PPC_SMP_MUXED_IPI
+struct cpu_messages {
+	int messages;			/* current messages */
+	unsigned long data;		/* data for cause ipi */
+};
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct cpu_messages, ipi_message);
+
+void smp_muxed_ipi_set_data(int cpu, unsigned long data)
+{
+	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
+
+	info->data = data;
+}
+
+void smp_muxed_ipi_message_pass(int cpu, int msg)
+{
+	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
+	char *message = (char *)&info->messages;
+
+	message[msg] = 1;
+	mb();
+	smp_ops->cause_ipi(cpu, info->data);
+}
+
+void smp_muxed_ipi_resend(void)
+{
+	struct cpu_messages *info = &__get_cpu_var(ipi_message);
+
+	if (info->messages)
+		smp_ops->cause_ipi(smp_processor_id(), info->data);
+}
+
+irqreturn_t smp_ipi_demux(void)
+{
+	struct cpu_messages *info = &__get_cpu_var(ipi_message);
+	unsigned int all;
+
+	mb();	/* order any irq clear */
+
+	do {
+		all = xchg_local(&info->messages, 0);
+
+#ifdef __BIG_ENDIAN
+		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))
+			generic_smp_call_function_interrupt();
+		if (all & (1 << (24 - 8 * PPC_MSG_RESCHEDULE)))
+			scheduler_ipi();
+		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNC_SINGLE)))
+			generic_smp_call_function_single_interrupt();
+		if (all & (1 << (24 - 8 * PPC_MSG_DEBUGGER_BREAK)))
+			debug_ipi_action(0, NULL);
+#else
+#error Unsupported ENDIAN
+#endif
+	} while (info->messages);
+
+	return IRQ_HANDLED;
+}
+#endif /* CONFIG_PPC_SMP_MUXED_IPI */
+
 void smp_send_reschedule(int cpu)
 {
 	if (likely(smp_ops))
@@ -197,11 +257,18 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 		smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
 }
 
-#ifdef CONFIG_DEBUGGER
-void smp_send_debugger_break(int cpu)
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+void smp_send_debugger_break(void)
 {
-	if (likely(smp_ops))
-		smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK);
+	int cpu;
+	int me = raw_smp_processor_id();
+
+	if (unlikely(!smp_ops))
+		return;
+
+	for_each_online_cpu(cpu)
+		if (cpu != me)
+			smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK);
 }
 #endif
 
@@ -209,9 +276,9 @@ void smp_send_debugger_break(int cpu)
 void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
 {
 	crash_ipi_function_ptr = crash_ipi_callback;
-	if (crash_ipi_callback && smp_ops) {
+	if (crash_ipi_callback) {
 		mb();
-		smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK);
+		smp_send_debugger_break();
 	}
 }
 #endif
@@ -238,23 +305,6 @@ static void __devinit smp_store_cpu_info(int id)
 	per_cpu(cpu_pvr, id) = mfspr(SPRN_PVR);
 }
 
-static void __init smp_create_idle(unsigned int cpu)
-{
-	struct task_struct *p;
-
-	/* create a process for the processor */
-	p = fork_idle(cpu);
-	if (IS_ERR(p))
-		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
-#ifdef CONFIG_PPC64
-	paca[cpu].__current = p;
-	paca[cpu].kstack = (unsigned long) task_thread_info(p)
-		+ THREAD_SIZE - STACK_FRAME_OVERHEAD;
-#endif
-	current_set[cpu] = task_thread_info(p);
-	task_thread_info(p)->cpu = cpu;
-}
-
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned int cpu;
@@ -288,10 +338,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 			max_cpus = NR_CPUS;
 	else
 		max_cpus = 1;
-
-	for_each_possible_cpu(cpu)
-		if (cpu != boot_cpuid)
-			smp_create_idle(cpu);
 }
 
 void __devinit smp_prepare_boot_cpu(void)
@@ -305,7 +351,7 @@ void __devinit smp_prepare_boot_cpu(void)
 
 #ifdef CONFIG_HOTPLUG_CPU
 /* State of each CPU during hotplug phases */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
+static DEFINE_PER_CPU(int, cpu_state) = { 0 };
 
 int generic_cpu_disable(void)
 {
@@ -317,30 +363,8 @@ int generic_cpu_disable(void)
 	set_cpu_online(cpu, false);
 #ifdef CONFIG_PPC64
 	vdso_data->processorCount--;
-	fixup_irqs(cpu_online_mask);
-#endif
-	return 0;
-}
-
-int generic_cpu_enable(unsigned int cpu)
-{
-	/* Do the normal bootup if we haven't
-	 * already bootstrapped. */
-	if (system_state != SYSTEM_RUNNING)
-		return -ENOSYS;
-
-	/* get the target out of it's holding state */
-	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-	smp_wmb();
-
-	while (!cpu_online(cpu))
-		cpu_relax();
-
-#ifdef CONFIG_PPC64
-	fixup_irqs(cpu_online_mask);
-	/* counter the irq disable in fixup_irqs */
-	local_irq_enable();
 #endif
+	migrate_irqs();
 	return 0;
 }
 
@@ -362,37 +386,89 @@ void generic_mach_cpu_die(void)
 	unsigned int cpu;
 
 	local_irq_disable();
+	idle_task_exit();
 	cpu = smp_processor_id();
 	printk(KERN_DEBUG "CPU%d offline\n", cpu);
 	__get_cpu_var(cpu_state) = CPU_DEAD;
 	smp_wmb();
 	while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
 		cpu_relax();
-	set_cpu_online(cpu, true);
-	local_irq_enable();
+}
+
+void generic_set_cpu_dead(unsigned int cpu)
+{
+	per_cpu(cpu_state, cpu) = CPU_DEAD;
 }
 #endif
 
-static int __devinit cpu_enable(unsigned int cpu)
+struct create_idle {
+	struct work_struct work;
+	struct task_struct *idle;
+	struct completion done;
+	int cpu;
+};
+
+static void __cpuinit do_fork_idle(struct work_struct *work)
 {
-	if (smp_ops && smp_ops->cpu_enable)
-		return smp_ops->cpu_enable(cpu);
+	struct create_idle *c_idle =
+		container_of(work, struct create_idle, work);
 
-	return -ENOSYS;
+	c_idle->idle = fork_idle(c_idle->cpu);
+	complete(&c_idle->done);
 }
 
-int __cpuinit __cpu_up(unsigned int cpu)
+static int __cpuinit create_idle(unsigned int cpu)
 {
-	int c;
+	struct thread_info *ti;
+	struct create_idle c_idle = {
+		.cpu	= cpu,
+		.done	= COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
+	};
+	INIT_WORK_ONSTACK(&c_idle.work, do_fork_idle);
 
-	secondary_ti = current_set[cpu];
-	if (!cpu_enable(cpu))
-		return 0;
+	c_idle.idle = get_idle_for_cpu(cpu);
+
+	/* We can't use kernel_thread since we must avoid to
+	 * reschedule the child. We use a workqueue because
+	 * we want to fork from a kernel thread, not whatever
+	 * userspace process happens to be trying to online us.
+	 */
+	if (!c_idle.idle) {
+		schedule_work(&c_idle.work);
+		wait_for_completion(&c_idle.done);
+	} else
+		init_idle(c_idle.idle, cpu);
+	if (IS_ERR(c_idle.idle)) {		
+		pr_err("Failed fork for CPU %u: %li", cpu, PTR_ERR(c_idle.idle));
+		return PTR_ERR(c_idle.idle);
+	}
+	ti = task_thread_info(c_idle.idle);
+
+#ifdef CONFIG_PPC64
+	paca[cpu].__current = c_idle.idle;
+	paca[cpu].kstack = (unsigned long)ti + THREAD_SIZE - STACK_FRAME_OVERHEAD;
+#endif
+	ti->cpu = cpu;
+	current_set[cpu] = ti;
+
+	return 0;
+}
+
+int __cpuinit __cpu_up(unsigned int cpu)
+{
+	int rc, c;
 
 	if (smp_ops == NULL ||
 	    (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)))
 		return -EINVAL;
 
+	/* Make sure we have an idle thread */
+	rc = create_idle(cpu);
+	if (rc)
+		return rc;
+
+	secondary_ti = current_set[cpu];
+
 	/* Make sure callin-map entry is 0 (can be leftover a CPU
 	 * hotplug
 	 */
@@ -406,7 +482,11 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 	/* wake up cpus */
 	DBG("smp: kicking cpu %d\n", cpu);
-	smp_ops->kick_cpu(cpu);
+	rc = smp_ops->kick_cpu(cpu);
+	if (rc) {
+		pr_err("smp: failed starting cpu %d (rc %d)\n", cpu, rc);
+		return rc;
+	}
 
 	/*
 	 * wait to see if the cpu made a callin (is actually up).
@@ -479,7 +559,7 @@ int cpu_first_thread_of_core(int core)
 }
 EXPORT_SYMBOL_GPL(cpu_first_thread_of_core);
 
-/* Must be called when no change can occur to cpu_present_map,
+/* Must be called when no change can occur to cpu_present_mask,
  * i.e. during cpu online or offline.
  */
 static struct device_node *cpu_to_l2cache(int cpu)
@@ -502,7 +582,7 @@ static struct device_node *cpu_to_l2cache(int cpu)
 }
 
 /* Activate a secondary processor. */
-int __devinit start_secondary(void *unused)
+void __devinit start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
 	struct device_node *l2_cache;
@@ -523,6 +603,10 @@ int __devinit start_secondary(void *unused)
 
 	secondary_cpu_time_init();
 
+#ifdef CONFIG_PPC64
+	if (system_state == SYSTEM_RUNNING)
+		vdso_data->processorCount++;
+#endif
 	ipi_call_lock();
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
@@ -558,7 +642,8 @@ int __devinit start_secondary(void *unused)
 	local_irq_enable();
 
 	cpu_idle();
-	return 0;
+
+	BUG();
 }
 
 int setup_profiling_timer(unsigned int multiplier)
@@ -575,7 +660,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	 * se we pin us down to CPU 0 for a short while
 	 */
 	alloc_cpumask_var(&old_mask, GFP_NOWAIT);
-	cpumask_copy(old_mask, &current->cpus_allowed);
+	cpumask_copy(old_mask, tsk_cpus_allowed(current));
 	set_cpus_allowed_ptr(current, cpumask_of(boot_cpuid));
 	
 	if (smp_ops && smp_ops->setup_cpu)
@@ -585,7 +670,11 @@ void __init smp_cpus_done(unsigned int max_cpus)
 
 	free_cpumask_var(old_mask);
 
+	if (smp_ops && smp_ops->bringup_done)
+		smp_ops->bringup_done();
+
 	dump_numa_cpu_topology();
+
 }
 
 int arch_sd_sibling_asym_packing(void)
@@ -660,5 +749,9 @@ void cpu_die(void)
 {
 	if (ppc_md.cpu_die)
 		ppc_md.cpu_die();
+
+	/* If we return, we re-enter start_secondary */
+	start_secondary_resume();
 }
+
 #endif
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index b0754e23743..ba4dee3d233 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -143,7 +143,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
 	/* Disable MSR:DR to make sure we don't take a TLB or
 	 * hash miss during the copy, as our hash table will
-	 * for a while be unuseable. For .text, we assume we are
+	 * for a while be unusable. For .text, we assume we are
 	 * covered by a BAT. This works only for non-G5 at this
 	 * point. G5 will need a better approach, possibly using
 	 * a small temporary hash table filled with large mappings,
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index c0d8c2006bf..f0f2199e64e 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -182,6 +182,41 @@ static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
 static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
 static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
 static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
+
+unsigned long dscr_default = 0;
+EXPORT_SYMBOL(dscr_default);
+
+static ssize_t show_dscr_default(struct sysdev_class *class,
+		struct sysdev_class_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lx\n", dscr_default);
+}
+
+static ssize_t __used store_dscr_default(struct sysdev_class *class,
+		struct sysdev_class_attribute *attr, const char *buf,
+		size_t count)
+{
+	unsigned long val;
+	int ret = 0;
+	
+	ret = sscanf(buf, "%lx", &val);
+	if (ret != 1)
+		return -EINVAL;
+	dscr_default = val;
+
+	return count;
+}
+
+static SYSDEV_CLASS_ATTR(dscr_default, 0600,
+		show_dscr_default, store_dscr_default);
+
+static void sysfs_create_dscr_default(void)
+{
+	int err = 0;
+	if (cpu_has_feature(CPU_FTR_DSCR))
+		err = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+			&attr_dscr_default.attr);
+}
 #endif /* CONFIG_PPC64 */
 
 #ifdef HAS_PPC_PMC_PA6T
@@ -617,6 +652,9 @@ static int __init topology_init(void)
 		if (cpu_online(cpu))
 			register_cpu_online(cpu);
 	}
+#ifdef CONFIG_PPC64
+	sysfs_create_dscr_default();
+#endif /* CONFIG_PPC64 */
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 09d31dbf43f..f33acfd872a 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -229,6 +229,9 @@ static u64 scan_dispatch_log(u64 stop_tb)
 	u64 stolen = 0;
 	u64 dtb;
 
+	if (!dtl)
+		return 0;
+
 	if (i == vpa->dtl_idx)
 		return 0;
 	while (i < vpa->dtl_idx) {
@@ -356,7 +359,7 @@ void account_system_vtime(struct task_struct *tsk)
 	}
 	get_paca()->user_time_scaled += user_scaled;
 
-	if (in_irq() || idle_task(smp_processor_id()) != tsk) {
+	if (in_interrupt() || idle_task(smp_processor_id()) != tsk) {
 		account_system_time(tsk, 0, delta, sys_scaled);
 		if (stolen)
 			account_steal_time(stolen);
@@ -577,14 +580,21 @@ void timer_interrupt(struct pt_regs * regs)
 	struct clock_event_device *evt = &decrementer->event;
 	u64 now;
 
+	/* Ensure a positive value is written to the decrementer, or else
+	 * some CPUs will continue to take decrementer exceptions.
+	 */
+	set_dec(DECREMENTER_MAX);
+
+	/* Some implementations of hotplug will get timer interrupts while
+	 * offline, just ignore these
+	 */
+	if (!cpu_online(smp_processor_id()))
+		return;
+
 	trace_timer_interrupt_entry(regs);
 
 	__get_cpu_var(irq_stat).timer_irqs++;
 
-	/* Ensure a positive value is written to the decrementer, or else
-	 * some CPUs will continuue to take decrementer exceptions */
-	set_dec(DECREMENTER_MAX);
-
 #if defined(CONFIG_PPC32) && defined(CONFIG_PMAC)
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index bd74fac169b..b13306b0d92 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -143,7 +143,6 @@ int die(const char *str, struct pt_regs *regs, long err)
 #endif
 		printk("%s\n", ppc_md.name ? ppc_md.name : "");
 
-		sysfs_printk_last_file();
 		if (notify_die(DIE_OOPS, str, regs, err, 255,
 			       SIGSEGV) == NOTIFY_STOP)
 			return 1;
@@ -199,7 +198,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 	} else if (show_unhandled_signals &&
 		    unhandled_signal(current, signr) &&
 		    printk_ratelimit()) {
-			printk(regs->msr & MSR_SF ? fmt64 : fmt32,
+			printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
 				current->comm, current->pid, signr,
 				addr, regs->nip, regs->link, code);
 		}
@@ -221,7 +220,7 @@ void system_reset_exception(struct pt_regs *regs)
 	}
 
 #ifdef CONFIG_KEXEC
-	cpu_set(smp_processor_id(), cpus_in_sr);
+	cpumask_set_cpu(smp_processor_id(), &cpus_in_sr);
 #endif
 
 	die("System Reset", regs, SIGABRT);
@@ -909,6 +908,26 @@ static int emulate_instruction(struct pt_regs *regs)
 		return emulate_isel(regs, instword);
 	}
 
+#ifdef CONFIG_PPC64
+	/* Emulate the mfspr rD, DSCR. */
+	if (((instword & PPC_INST_MFSPR_DSCR_MASK) == PPC_INST_MFSPR_DSCR) &&
+			cpu_has_feature(CPU_FTR_DSCR)) {
+		PPC_WARN_EMULATED(mfdscr, regs);
+		rd = (instword >> 21) & 0x1f;
+		regs->gpr[rd] = mfspr(SPRN_DSCR);
+		return 0;
+	}
+	/* Emulate the mtspr DSCR, rD. */
+	if (((instword & PPC_INST_MTSPR_DSCR_MASK) == PPC_INST_MTSPR_DSCR) &&
+			cpu_has_feature(CPU_FTR_DSCR)) {
+		PPC_WARN_EMULATED(mtdscr, regs);
+		rd = (instword >> 21) & 0x1f;
+		mtspr(SPRN_DSCR, regs->gpr[rd]);
+		current->thread.dscr_inherit = 1;
+		return 0;
+	}
+#endif
+
 	return -EINVAL;
 }
 
@@ -959,7 +978,7 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 	 * ESR_DST (!?) or 0.  In the process of chasing this with the
 	 * hardware people - not sure if it can happen on any illegal
 	 * instruction or only on FP instructions, whether there is a
-	 * pattern to occurences etc. -dgibson 31/Mar/2003 */
+	 * pattern to occurrences etc. -dgibson 31/Mar/2003 */
 	switch (do_mathemu(regs)) {
 	case 0:
 		emulate_single_step(regs);
@@ -1506,6 +1525,10 @@ struct ppc_emulated ppc_emulated = {
 #ifdef CONFIG_VSX
 	WARN_EMULATED_SETUP(vsx),
 #endif
+#ifdef CONFIG_PPC64
+	WARN_EMULATED_SETUP(mfdscr),
+	WARN_EMULATED_SETUP(mtdscr),
+#endif
 };
 
 u32 ppc_warn_emulated;
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index e39cad83c88..23d65abbedc 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -62,6 +62,8 @@ void __init udbg_early_init(void)
 	udbg_init_cpm();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
 	udbg_init_usbgecko();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_WSP)
+	udbg_init_wsp();
 #endif
 
 #ifdef CONFIG_PPC_EARLY_DEBUG
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index b4b167b3364..6837f839ab7 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -1,5 +1,5 @@
 /*
- * udbg for NS16550 compatable serial ports
+ * udbg for NS16550 compatible serial ports
  *
  * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
  *
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <asm/udbg.h>
 #include <asm/io.h>
+#include <asm/reg_a2.h>
 
 extern u8 real_readb(volatile u8 __iomem  *addr);
 extern void real_writeb(u8 data, volatile u8 __iomem *addr);
@@ -298,3 +299,53 @@ void __init udbg_init_40x_realmode(void)
 	udbg_getc_poll = NULL;
 }
 #endif /* CONFIG_PPC_EARLY_DEBUG_40x */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
+static void udbg_wsp_flush(void)
+{
+	if (udbg_comport) {
+		while ((readb(&udbg_comport->lsr) & LSR_THRE) == 0)
+			/* wait for idle */;
+	}
+}
+
+static void udbg_wsp_putc(char c)
+{
+	if (udbg_comport) {
+		if (c == '\n')
+			udbg_wsp_putc('\r');
+		udbg_wsp_flush();
+		writeb(c, &udbg_comport->thr); eieio();
+	}
+}
+
+static int udbg_wsp_getc(void)
+{
+	if (udbg_comport) {
+		while ((readb(&udbg_comport->lsr) & LSR_DR) == 0)
+			; /* wait for char */
+		return readb(&udbg_comport->rbr);
+	}
+	return -1;
+}
+
+static int udbg_wsp_getc_poll(void)
+{
+	if (udbg_comport)
+		if (readb(&udbg_comport->lsr) & LSR_DR)
+			return readb(&udbg_comport->rbr);
+	return -1;
+}
+
+void __init udbg_init_wsp(void)
+{
+	udbg_comport = (struct NS16550 __iomem *)WSP_UART_VIRT;
+
+	udbg_init_uart(udbg_comport, 57600, 50000000);
+
+	udbg_putc = udbg_wsp_putc;
+	udbg_flush = udbg_wsp_flush;
+	udbg_getc = udbg_wsp_getc;
+	udbg_getc_poll = udbg_wsp_getc_poll;
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
diff --git a/arch/powerpc/kernel/vdso32/sigtramp.S b/arch/powerpc/kernel/vdso32/sigtramp.S
index 68d49dd71dc..cf0c9c9c24f 100644
--- a/arch/powerpc/kernel/vdso32/sigtramp.S
+++ b/arch/powerpc/kernel/vdso32/sigtramp.S
@@ -19,7 +19,7 @@
 
 /* The nop here is a hack.  The dwarf2 unwind routines subtract 1 from
    the return address to get an address in the middle of the presumed
-   call instruction.  Since we don't have a call here, we artifically
+   call instruction.  Since we don't have a call here, we artificially
    extend the range covered by the unwind info by adding a nop before
    the real start.  */
 	nop
diff --git a/arch/powerpc/kernel/vdso64/sigtramp.S b/arch/powerpc/kernel/vdso64/sigtramp.S
index 59eb59bb408..45ea281e9a2 100644
--- a/arch/powerpc/kernel/vdso64/sigtramp.S
+++ b/arch/powerpc/kernel/vdso64/sigtramp.S
@@ -20,7 +20,7 @@
 
 /* The nop here is a hack.  The dwarf2 unwind routines subtract 1 from
    the return address to get an address in the middle of the presumed
-   call instruction.  Since we don't have a call here, we artifically
+   call instruction.  Since we don't have a call here, we artificially
    extend the range covered by the unwind info by padding before the
    real start.  */
 	nop
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 9de6f396cf8..4d5a3edff49 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -102,7 +102,7 @@ _GLOBAL(giveup_altivec)
 	MTMSRD(r5)			/* enable use of VMX now */
 	isync
 	PPC_LCMPI	0,r3,0
-	beqlr-				/* if no previous owner, done */
+	beqlr				/* if no previous owner, done */
 	addi	r3,r3,THREAD		/* want THREAD of task */
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r5,0
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index c961de40c67..0f95b5cce03 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -236,7 +236,7 @@ void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu)
 
 int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu)
 {
-	return test_bit(BOOK3S_INTERRUPT_DECREMENTER >> 7, &vcpu->arch.pending_exceptions);
+	return test_bit(BOOK3S_IRQPRIO_DECREMENTER, &vcpu->arch.pending_exceptions);
 }
 
 void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu)
diff --git a/arch/powerpc/kvm/book3s_rmhandlers.S b/arch/powerpc/kvm/book3s_rmhandlers.S
index 2b9c9088d00..1a1b34487e7 100644
--- a/arch/powerpc/kvm/book3s_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_rmhandlers.S
@@ -35,9 +35,7 @@
 
 #if defined(CONFIG_PPC_BOOK3S_64)
 
-#define LOAD_SHADOW_VCPU(reg)				\
-	mfspr	reg, SPRN_SPRG_PACA
-
+#define LOAD_SHADOW_VCPU(reg)	GET_PACA(reg)					
 #define SHADOW_VCPU_OFF		PACA_KVM_SVCPU
 #define MSR_NOIRQ		MSR_KERNEL & ~(MSR_IR | MSR_DR)
 #define FUNC(name) 		GLUE(.,name)
@@ -72,7 +70,7 @@
 .global kvmppc_trampoline_\intno
 kvmppc_trampoline_\intno:
 
-	mtspr	SPRN_SPRG_SCRATCH0, r13		/* Save r13 */
+	SET_SCRATCH0(r13)		/* Save r13 */
 
 	/*
 	 * First thing to do is to find out if we're coming
@@ -91,7 +89,7 @@ kvmppc_trampoline_\intno:
 	lwz	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
 	mtcr	r12
 	PPC_LL	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
-	mfspr	r13, SPRN_SPRG_SCRATCH0		/* r13 = original r13 */
+	GET_SCRATCH0(r13)			/* r13 = original r13 */
 	b	kvmppc_resume_\intno		/* Get back original handler */
 
 	/* Now we know we're handling a KVM guest */
@@ -114,6 +112,9 @@ INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_MACHINE_CHECK
 INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_STORAGE
 INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_STORAGE
 INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_EXTERNAL
+#ifdef CONFIG_PPC_BOOK3S_64
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_EXTERNAL_HV
+#endif
 INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALIGNMENT
 INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PROGRAM
 INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_FP_UNAVAIL
@@ -158,7 +159,7 @@ kvmppc_handler_skip_ins:
 	lwz	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
 	mtcr	r12
 	PPC_LL	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
-	mfspr	r13, SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r13)
 
 	/* And get back into the code */
 	RFI
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
index 7c52ed0b705..451264274b8 100644
--- a/arch/powerpc/kvm/book3s_segment.S
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -155,14 +155,20 @@ kvmppc_handler_trampoline_exit:
 	PPC_LL	r2, (SHADOW_VCPU_OFF + SVCPU_HOST_R2)(r13)
 
 	/* Save guest PC and MSR */
-	mfsrr0	r3
+	andi.	r0,r12,0x2
+	beq	1f
+	mfspr	r3,SPRN_HSRR0
+	mfspr	r4,SPRN_HSRR1
+	andi.	r12,r12,0x3ffd
+	b	2f
+1:	mfsrr0	r3
 	mfsrr1	r4
-
+2:
 	PPC_STL	r3, (SHADOW_VCPU_OFF + SVCPU_PC)(r13)
 	PPC_STL	r4, (SHADOW_VCPU_OFF + SVCPU_SHADOW_SRR1)(r13)
 
 	/* Get scratch'ed off registers */
-	mfspr	r9, SPRN_SPRG_SCRATCH0
+	GET_SCRATCH0(r9)
 	PPC_LL	r8, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
 	lwz	r7, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
 
diff --git a/arch/powerpc/lib/alloc.c b/arch/powerpc/lib/alloc.c
index f53e09c7dac..13b676c20d1 100644
--- a/arch/powerpc/lib/alloc.c
+++ b/arch/powerpc/lib/alloc.c
@@ -6,14 +6,6 @@
 
 #include <asm/system.h>
 
-void * __init_refok alloc_maybe_bootmem(size_t size, gfp_t mask)
-{
-	if (mem_init_done)
-		return kmalloc(size, mask);
-	else
-		return alloc_bootmem(size);
-}
-
 void * __init_refok zalloc_maybe_bootmem(size_t size, gfp_t mask)
 {
 	void *p;
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 4d4eeb90048..53dcb6b1b70 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -6,6 +6,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
@@ -15,9 +16,9 @@ PPC64_CACHES:
         .tc             ppc64_caches[TC],ppc64_caches
         .section        ".text"
 
-
-_GLOBAL(copy_4K_page)
-	li	r5,4096		/* 4K page size */
+_GLOBAL(copy_page)
+	lis	r5,PAGE_SIZE@h
+	ori	r5,r5,PAGE_SIZE@l
 BEGIN_FTR_SECTION
 	ld      r10,PPC64_CACHES@toc(r2)
 	lwz	r11,DCACHEL1LOGLINESIZE(r10)	/* log2 of cache line size */
diff --git a/arch/powerpc/lib/devres.c b/arch/powerpc/lib/devres.c
index deac4d30daf..e91615abae6 100644
--- a/arch/powerpc/lib/devres.c
+++ b/arch/powerpc/lib/devres.c
@@ -9,11 +9,11 @@
 
 #include <linux/device.h>	/* devres_*(), devm_ioremap_release() */
 #include <linux/gfp.h>
-#include <linux/io.h>		/* ioremap_flags() */
+#include <linux/io.h>		/* ioremap_prot() */
 #include <linux/module.h>	/* EXPORT_SYMBOL() */
 
 /**
- * devm_ioremap_prot - Managed ioremap_flags()
+ * devm_ioremap_prot - Managed ioremap_prot()
  * @dev: Generic device to remap IO address for
  * @offset: BUS offset to map
  * @size: Size of map
@@ -31,7 +31,7 @@ void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
 	if (!ptr)
 		return NULL;
 
-	addr = ioremap_flags(offset, size, flags);
+	addr = ioremap_prot(offset, size, flags);
 	if (addr) {
 		*ptr = addr;
 		devres_add(dev, ptr);
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index ae5189ab004..9a52349874e 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/ptrace.h>
+#include <linux/prefetch.h>
 #include <asm/sstep.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
@@ -45,6 +46,18 @@ extern int do_stxvd2x(int rn, unsigned long ea);
 #endif
 
 /*
+ * Emulate the truncation of 64 bit values in 32-bit mode.
+ */
+static unsigned long truncate_if_32bit(unsigned long msr, unsigned long val)
+{
+#ifdef __powerpc64__
+	if ((msr & MSR_64BIT) == 0)
+		val &= 0xffffffffUL;
+#endif
+	return val;
+}
+
+/*
  * Determine whether a conditional branch instruction would branch.
  */
 static int __kprobes branch_taken(unsigned int instr, struct pt_regs *regs)
@@ -90,11 +103,8 @@ static unsigned long __kprobes dform_ea(unsigned int instr, struct pt_regs *regs
 		if (instr & 0x04000000)		/* update forms */
 			regs->gpr[ra] = ea;
 	}
-#ifdef __powerpc64__
-	if (!(regs->msr & MSR_SF))
-		ea &= 0xffffffffUL;
-#endif
-	return ea;
+
+	return truncate_if_32bit(regs->msr, ea);
 }
 
 #ifdef __powerpc64__
@@ -113,9 +123,8 @@ static unsigned long __kprobes dsform_ea(unsigned int instr, struct pt_regs *reg
 		if ((instr & 3) == 1)		/* update forms */
 			regs->gpr[ra] = ea;
 	}
-	if (!(regs->msr & MSR_SF))
-		ea &= 0xffffffffUL;
-	return ea;
+
+	return truncate_if_32bit(regs->msr, ea);
 }
 #endif /* __powerpc64 */
 
@@ -136,11 +145,8 @@ static unsigned long __kprobes xform_ea(unsigned int instr, struct pt_regs *regs
 		if (do_update)		/* update forms */
 			regs->gpr[ra] = ea;
 	}
-#ifdef __powerpc64__
-	if (!(regs->msr & MSR_SF))
-		ea &= 0xffffffffUL;
-#endif
-	return ea;
+
+	return truncate_if_32bit(regs->msr, ea);
 }
 
 /*
@@ -466,7 +472,7 @@ static void __kprobes set_cr0(struct pt_regs *regs, int rd)
 
 	regs->ccr = (regs->ccr & 0x0fffffff) | ((regs->xer >> 3) & 0x10000000);
 #ifdef __powerpc64__
-	if (!(regs->msr & MSR_SF))
+	if (!(regs->msr & MSR_64BIT))
 		val = (int) val;
 #endif
 	if (val < 0)
@@ -487,7 +493,7 @@ static void __kprobes add_with_carry(struct pt_regs *regs, int rd,
 		++val;
 	regs->gpr[rd] = val;
 #ifdef __powerpc64__
-	if (!(regs->msr & MSR_SF)) {
+	if (!(regs->msr & MSR_64BIT)) {
 		val = (unsigned int) val;
 		val1 = (unsigned int) val1;
 	}
@@ -570,8 +576,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		if ((instr & 2) == 0)
 			imm += regs->nip;
 		regs->nip += 4;
-		if ((regs->msr & MSR_SF) == 0)
-			regs->nip &= 0xffffffffUL;
+		regs->nip = truncate_if_32bit(regs->msr, regs->nip);
 		if (instr & 1)
 			regs->link = regs->nip;
 		if (branch_taken(instr, regs))
@@ -604,13 +609,9 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 			imm -= 0x04000000;
 		if ((instr & 2) == 0)
 			imm += regs->nip;
-		if (instr & 1) {
-			regs->link = regs->nip + 4;
-			if ((regs->msr & MSR_SF) == 0)
-				regs->link &= 0xffffffffUL;
-		}
-		if ((regs->msr & MSR_SF) == 0)
-			imm &= 0xffffffffUL;
+		if (instr & 1)
+			regs->link = truncate_if_32bit(regs->msr, regs->nip + 4);
+		imm = truncate_if_32bit(regs->msr, imm);
 		regs->nip = imm;
 		return 1;
 	case 19:
@@ -618,11 +619,8 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		case 16:	/* bclr */
 		case 528:	/* bcctr */
 			imm = (instr & 0x400)? regs->ctr: regs->link;
-			regs->nip += 4;
-			if ((regs->msr & MSR_SF) == 0) {
-				regs->nip &= 0xffffffffUL;
-				imm &= 0xffffffffUL;
-			}
+			regs->nip = truncate_if_32bit(regs->msr, regs->nip + 4);
+			imm = truncate_if_32bit(regs->msr, imm);
 			if (instr & 1)
 				regs->link = regs->nip;
 			if (branch_taken(instr, regs))
@@ -1616,11 +1614,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		return 0;	/* invoke DSI if -EFAULT? */
 	}
  instr_done:
-	regs->nip += 4;
-#ifdef __powerpc64__
-	if ((regs->msr & MSR_SF) == 0)
-		regs->nip &= 0xffffffffUL;
-#endif
+	regs->nip = truncate_if_32bit(regs->msr, regs->nip + 4);
 	return 1;
 
  logical_done:
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index 757c0bed9a9..b42f76c4948 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -399,3 +399,23 @@ void __dma_sync_page(struct page *page, unsigned long offset,
 #endif
 }
 EXPORT_SYMBOL(__dma_sync_page);
+
+/*
+ * Return the PFN for a given cpu virtual address returned by
+ * __dma_alloc_coherent. This is used by dma_mmap_coherent()
+ */
+unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr)
+{
+	/* This should always be populated, so we don't test every
+	 * level. If that fails, we'll have a nice crash which
+	 * will be as good as a BUG_ON()
+	 */
+	pgd_t *pgd = pgd_offset_k(cpu_addr);
+	pud_t *pud = pud_offset(pgd, cpu_addr);
+	pmd_t *pmd = pmd_offset(pud, cpu_addr);
+	pte_t *ptep = pte_offset_kernel(pmd, cpu_addr);
+
+	if (pte_none(*ptep) || !pte_present(*ptep))
+		return 0;
+	return pte_pfn(*ptep);
+}
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 3079f6b44cf..a242b5d7cbe 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -118,7 +118,7 @@ _GLOBAL(__hash_page_4K)
 BEGIN_FTR_SECTION
 	cmpdi	r9,0			/* check segment size */
 	bne	3f
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	/* Calc va and put it in r29 */
 	rldicr	r29,r5,28,63-28
 	rldicl	r3,r3,0,36
@@ -192,8 +192,8 @@ htab_insert_pte:
 	rldicr	r3,r0,3,63-3		/* r3 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
-	mr	r4,r29			/* Retreive va */
+	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
 	ld	r9,STK_PARM(r9)(r1)	/* segment size */
@@ -215,8 +215,8 @@ _GLOBAL(htab_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
 	
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
-	mr	r4,r29			/* Retreive va */
+	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
 	ld	r9,STK_PARM(r9)(r1)	/* segment size */
@@ -401,7 +401,7 @@ _GLOBAL(__hash_page_4K)
 BEGIN_FTR_SECTION
 	cmpdi	r9,0			/* check segment size */
 	bne	3f
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	/* Calc va and put it in r29 */
 	rldicr	r29,r5,28,63-28		/* r29 = (vsid << 28) */
 	rldicl	r3,r3,0,36		/* r3 = (ea & 0x0fffffff) */
@@ -495,8 +495,8 @@ htab_special_pfn:
 	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
-	mr	r4,r29			/* Retreive va */
+	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
 	ld	r9,STK_PARM(r9)(r1)	/* segment size */
@@ -522,8 +522,8 @@ _GLOBAL(htab_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3		/* r0 = (~hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
-	mr	r4,r29			/* Retreive va */
+	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
 	ld	r9,STK_PARM(r9)(r1)	/* segment size */
@@ -715,7 +715,7 @@ BEGIN_FTR_SECTION
 	andi.	r0,r31,_PAGE_NO_CACHE
 	/* If so, bail out and refault as a 4k page */
 	bne-	ht64_bail_ok
-END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_CI_LARGE_PAGE)
 	/* Prepare new PTE value (turn access RW into DIRTY, then
 	 * add BUSY and ACCESSED)
 	 */
@@ -736,7 +736,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
 BEGIN_FTR_SECTION
 	cmpdi	r9,0			/* check segment size */
 	bne	3f
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	/* Calc va and put it in r29 */
 	rldicr	r29,r5,28,63-28
 	rldicl	r3,r3,0,36
@@ -813,8 +813,8 @@ ht64_insert_pte:
 	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
-	mr	r4,r29			/* Retreive va */
+	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_64K
 	ld	r9,STK_PARM(r9)(r1)	/* segment size */
@@ -836,8 +836,8 @@ _GLOBAL(ht64_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retreive new pp bits */
-	mr	r4,r29			/* Retreive va */
+	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_64K
 	ld	r9,STK_PARM(r9)(r1)	/* segment size */
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 784a400e078..dfd764896db 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -50,9 +50,8 @@ static inline void __tlbie(unsigned long va, int psize, int ssize)
 	case MMU_PAGE_4K:
 		va &= ~0xffful;
 		va |= ssize << 8;
-		asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0),
-					       %2)
-			     : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+		asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2)
+			     : : "r" (va), "r"(0), "i" (CPU_FTR_HVMODE_206)
 			     : "memory");
 		break;
 	default:
@@ -61,9 +60,8 @@ static inline void __tlbie(unsigned long va, int psize, int ssize)
 		va |= penc << 12;
 		va |= ssize << 8;
 		va |= 1; /* L */
-		asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0),
-					       %2)
-			     : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+		asm volatile(ASM_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0), %2)
+			     : : "r" (va), "r"(0), "i" (CPU_FTR_HVMODE_206)
 			     : "memory");
 		break;
 	}
@@ -98,8 +96,8 @@ static inline void __tlbiel(unsigned long va, int psize, int ssize)
 
 static inline void tlbie(unsigned long va, int psize, int ssize, int local)
 {
-	unsigned int use_local = local && cpu_has_feature(CPU_FTR_TLBIEL);
-	int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
+	unsigned int use_local = local && mmu_has_feature(MMU_FTR_TLBIEL);
+	int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
 
 	if (use_local)
 		use_local = mmu_psize_defs[psize].tlbiel;
@@ -503,7 +501,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 		} pte_iterate_hashed_end();
 	}
 
-	if (cpu_has_feature(CPU_FTR_TLBIEL) &&
+	if (mmu_has_feature(MMU_FTR_TLBIEL) &&
 	    mmu_psize_defs[psize].tlbiel && local) {
 		asm volatile("ptesync":::"memory");
 		for (i = 0; i < number; i++) {
@@ -517,7 +515,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 		}
 		asm volatile("ptesync":::"memory");
 	} else {
-		int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
+		int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
 
 		if (lock_tlbie)
 			raw_spin_lock(&native_tlbie_lock);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index a5991facddc..26b2872b3d0 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -53,6 +53,7 @@
 #include <asm/sections.h>
 #include <asm/spu.h>
 #include <asm/udbg.h>
+#include <asm/code-patching.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -258,11 +259,11 @@ static int __init htab_dt_scan_seg_sizes(unsigned long node,
 	for (; size >= 4; size -= 4, ++prop) {
 		if (prop[0] == 40) {
 			DBG("1T segment support detected\n");
-			cur_cpu_spec->cpu_features |= CPU_FTR_1T_SEGMENT;
+			cur_cpu_spec->mmu_features |= MMU_FTR_1T_SEGMENT;
 			return 1;
 		}
 	}
-	cur_cpu_spec->cpu_features &= ~CPU_FTR_NO_SLBIE_B;
+	cur_cpu_spec->mmu_features &= ~MMU_FTR_NO_SLBIE_B;
 	return 0;
 }
 
@@ -288,7 +289,7 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 	if (prop != NULL) {
 		DBG("Page sizes from device-tree:\n");
 		size /= 4;
-		cur_cpu_spec->cpu_features &= ~(CPU_FTR_16M_PAGE);
+		cur_cpu_spec->mmu_features &= ~(MMU_FTR_16M_PAGE);
 		while(size > 0) {
 			unsigned int shift = prop[0];
 			unsigned int slbenc = prop[1];
@@ -316,7 +317,7 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 				break;
 			case 0x18:
 				idx = MMU_PAGE_16M;
-				cur_cpu_spec->cpu_features |= CPU_FTR_16M_PAGE;
+				cur_cpu_spec->mmu_features |= MMU_FTR_16M_PAGE;
 				break;
 			case 0x22:
 				idx = MMU_PAGE_16G;
@@ -411,7 +412,7 @@ static void __init htab_init_page_sizes(void)
 	 * Not in the device-tree, let's fallback on known size
 	 * list for 16M capable GP & GR
 	 */
-	if (cpu_has_feature(CPU_FTR_16M_PAGE))
+	if (mmu_has_feature(MMU_FTR_16M_PAGE))
 		memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
 		       sizeof(mmu_psize_defaults_gp));
  found:
@@ -441,7 +442,7 @@ static void __init htab_init_page_sizes(void)
 		mmu_vmalloc_psize = MMU_PAGE_64K;
 		if (mmu_linear_psize == MMU_PAGE_4K)
 			mmu_linear_psize = MMU_PAGE_64K;
-		if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE)) {
+		if (mmu_has_feature(MMU_FTR_CI_LARGE_PAGE)) {
 			/*
 			 * Don't use 64k pages for ioremap on pSeries, since
 			 * that would stop us accessing the HEA ethernet.
@@ -547,15 +548,7 @@ int remove_section_mapping(unsigned long start, unsigned long end)
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
-static inline void make_bl(unsigned int *insn_addr, void *func)
-{
-	unsigned long funcp = *((unsigned long *)func);
-	int offset = funcp - (unsigned long)insn_addr;
-
-	*insn_addr = (unsigned int)(0x48000001 | (offset & 0x03fffffc));
-	flush_icache_range((unsigned long)insn_addr, 4+
-			   (unsigned long)insn_addr);
-}
+#define FUNCTION_TEXT(A)	((*(unsigned long *)(A)))
 
 static void __init htab_finish_init(void)
 {
@@ -570,16 +563,33 @@ static void __init htab_finish_init(void)
 	extern unsigned int *ht64_call_hpte_remove;
 	extern unsigned int *ht64_call_hpte_updatepp;
 
-	make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert);
-	make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert);
-	make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove);
-	make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp);
+	patch_branch(ht64_call_hpte_insert1,
+		FUNCTION_TEXT(ppc_md.hpte_insert),
+		BRANCH_SET_LINK);
+	patch_branch(ht64_call_hpte_insert2,
+		FUNCTION_TEXT(ppc_md.hpte_insert),
+		BRANCH_SET_LINK);
+	patch_branch(ht64_call_hpte_remove,
+		FUNCTION_TEXT(ppc_md.hpte_remove),
+		BRANCH_SET_LINK);
+	patch_branch(ht64_call_hpte_updatepp,
+		FUNCTION_TEXT(ppc_md.hpte_updatepp),
+		BRANCH_SET_LINK);
+
 #endif /* CONFIG_PPC_HAS_HASH_64K */
 
-	make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert);
-	make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert);
-	make_bl(htab_call_hpte_remove, ppc_md.hpte_remove);
-	make_bl(htab_call_hpte_updatepp, ppc_md.hpte_updatepp);
+	patch_branch(htab_call_hpte_insert1,
+		FUNCTION_TEXT(ppc_md.hpte_insert),
+		BRANCH_SET_LINK);
+	patch_branch(htab_call_hpte_insert2,
+		FUNCTION_TEXT(ppc_md.hpte_insert),
+		BRANCH_SET_LINK);
+	patch_branch(htab_call_hpte_remove,
+		FUNCTION_TEXT(ppc_md.hpte_remove),
+		BRANCH_SET_LINK);
+	patch_branch(htab_call_hpte_updatepp,
+		FUNCTION_TEXT(ppc_md.hpte_updatepp),
+		BRANCH_SET_LINK);
 }
 
 static void __init htab_initialize(void)
@@ -598,7 +608,7 @@ static void __init htab_initialize(void)
 	/* Initialize page sizes */
 	htab_init_page_sizes();
 
-	if (cpu_has_feature(CPU_FTR_1T_SEGMENT)) {
+	if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) {
 		mmu_kernel_ssize = MMU_SEGSIZE_1T;
 		mmu_highuser_ssize = MMU_SEGSIZE_1T;
 		printk(KERN_INFO "Using 1TB segments\n");
@@ -739,7 +749,7 @@ void __init early_init_mmu(void)
 
 	/* Initialize stab / SLB management except on iSeries
 	 */
-	if (cpu_has_feature(CPU_FTR_SLB))
+	if (mmu_has_feature(MMU_FTR_SLB))
 		slb_initialize();
 	else if (!firmware_has_feature(FW_FEATURE_ISERIES))
 		stab_initialize(get_paca()->stab_real);
@@ -753,10 +763,10 @@ void __cpuinit early_init_mmu_secondary(void)
 		mtspr(SPRN_SDR1, _SDR1);
 
 	/* Initialize STAB/SLB. We use a virtual address as it works
-	 * in real mode on pSeries and we want a virutal address on
+	 * in real mode on pSeries and we want a virtual address on
 	 * iSeries anyway
 	 */
-	if (cpu_has_feature(CPU_FTR_SLB))
+	if (mmu_has_feature(MMU_FTR_SLB))
 		slb_initialize();
 	else
 		stab_initialize(get_paca()->stab_addr);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 9bb249c3046..0b9a5c1901b 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -529,7 +529,7 @@ static int __init hugetlbpage_init(void)
 {
 	int psize;
 
-	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
+	if (!mmu_has_feature(MMU_FTR_16M_PAGE))
 		return -ENODEV;
 
 	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index a6649965090..57e545b84bf 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -424,7 +424,7 @@ void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
 	clear_page(page);
 
 	/*
-	 * We shouldnt have to do this, but some versions of glibc
+	 * We shouldn't have to do this, but some versions of glibc
 	 * require it (ld.so assumes zero filled pages are icache clean)
 	 * - Anton
 	 */
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index 2535828aa84..3bafc3deca6 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -20,9 +20,205 @@
 #include <linux/idr.h>
 #include <linux/module.h>
 #include <linux/gfp.h>
+#include <linux/slab.h>
 
 #include <asm/mmu_context.h>
 
+#ifdef CONFIG_PPC_ICSWX
+/*
+ * The processor and its L2 cache cause the icswx instruction to
+ * generate a COP_REQ transaction on PowerBus. The transaction has
+ * no address, and the processor does not perform an MMU access
+ * to authenticate the transaction. The command portion of the
+ * PowerBus COP_REQ transaction includes the LPAR_ID (LPID) and
+ * the coprocessor Process ID (PID), which the coprocessor compares
+ * to the authorized LPID and PID held in the coprocessor, to determine
+ * if the process is authorized to generate the transaction.
+ * The data of the COP_REQ transaction is 128-byte or less and is
+ * placed in cacheable memory on a 128-byte cache line boundary.
+ *
+ * The task to use a coprocessor should use use_cop() to allocate
+ * a coprocessor PID before executing icswx instruction. use_cop()
+ * also enables the coprocessor context switching. Drop_cop() is
+ * used to free the coprocessor PID.
+ *
+ * Example:
+ * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
+ * Each HFI have multiple windows. Each HFI window serves as a
+ * network device sending to and receiving from HFI network.
+ * HFI immediate send function uses icswx instruction. The immediate
+ * send function allows small (single cache-line) packets be sent
+ * without using the regular HFI send FIFO and doorbell, which are
+ * much slower than immediate send.
+ *
+ * For each task intending to use HFI immediate send, the HFI driver
+ * calls use_cop() to obtain a coprocessor PID for the task.
+ * The HFI driver then allocate a free HFI window and save the
+ * coprocessor PID to the HFI window to allow the task to use the
+ * HFI window.
+ *
+ * The HFI driver repeatedly creates immediate send packets and
+ * issues icswx instruction to send data through the HFI window.
+ * The HFI compares the coprocessor PID in the CPU PID register
+ * to the PID held in the HFI window to determine if the transaction
+ * is allowed.
+ *
+ * When the task to release the HFI window, the HFI driver calls
+ * drop_cop() to release the coprocessor PID.
+ */
+
+#define COP_PID_NONE 0
+#define COP_PID_MIN (COP_PID_NONE + 1)
+#define COP_PID_MAX (0xFFFF)
+
+static DEFINE_SPINLOCK(mmu_context_acop_lock);
+static DEFINE_IDA(cop_ida);
+
+void switch_cop(struct mm_struct *next)
+{
+	mtspr(SPRN_PID, next->context.cop_pid);
+	mtspr(SPRN_ACOP, next->context.acop);
+}
+
+static int new_cop_pid(struct ida *ida, int min_id, int max_id,
+		       spinlock_t *lock)
+{
+	int index;
+	int err;
+
+again:
+	if (!ida_pre_get(ida, GFP_KERNEL))
+		return -ENOMEM;
+
+	spin_lock(lock);
+	err = ida_get_new_above(ida, min_id, &index);
+	spin_unlock(lock);
+
+	if (err == -EAGAIN)
+		goto again;
+	else if (err)
+		return err;
+
+	if (index > max_id) {
+		spin_lock(lock);
+		ida_remove(ida, index);
+		spin_unlock(lock);
+		return -ENOMEM;
+	}
+
+	return index;
+}
+
+static void sync_cop(void *arg)
+{
+	struct mm_struct *mm = arg;
+
+	if (mm == current->active_mm)
+		switch_cop(current->active_mm);
+}
+
+/**
+ * Start using a coprocessor.
+ * @acop: mask of coprocessor to be used.
+ * @mm: The mm the coprocessor to associate with. Most likely current mm.
+ *
+ * Return a positive PID if successful. Negative errno otherwise.
+ * The returned PID will be fed to the coprocessor to determine if an
+ * icswx transaction is authenticated.
+ */
+int use_cop(unsigned long acop, struct mm_struct *mm)
+{
+	int ret;
+
+	if (!cpu_has_feature(CPU_FTR_ICSWX))
+		return -ENODEV;
+
+	if (!mm || !acop)
+		return -EINVAL;
+
+	/* We need to make sure mm_users doesn't change */
+	down_read(&mm->mmap_sem);
+	spin_lock(mm->context.cop_lockp);
+
+	if (mm->context.cop_pid == COP_PID_NONE) {
+		ret = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
+				  &mmu_context_acop_lock);
+		if (ret < 0)
+			goto out;
+
+		mm->context.cop_pid = ret;
+	}
+	mm->context.acop |= acop;
+
+	sync_cop(mm);
+
+	/*
+	 * If this is a threaded process then there might be other threads
+	 * running. We need to send an IPI to force them to pick up any
+	 * change in PID and ACOP.
+	 */
+	if (atomic_read(&mm->mm_users) > 1)
+		smp_call_function(sync_cop, mm, 1);
+
+	ret = mm->context.cop_pid;
+
+out:
+	spin_unlock(mm->context.cop_lockp);
+	up_read(&mm->mmap_sem);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(use_cop);
+
+/**
+ * Stop using a coprocessor.
+ * @acop: mask of coprocessor to be stopped.
+ * @mm: The mm the coprocessor associated with.
+ */
+void drop_cop(unsigned long acop, struct mm_struct *mm)
+{
+	int free_pid = COP_PID_NONE;
+
+	if (!cpu_has_feature(CPU_FTR_ICSWX))
+		return;
+
+	if (WARN_ON_ONCE(!mm))
+		return;
+
+	/* We need to make sure mm_users doesn't change */
+	down_read(&mm->mmap_sem);
+	spin_lock(mm->context.cop_lockp);
+
+	mm->context.acop &= ~acop;
+
+	if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
+		free_pid = mm->context.cop_pid;
+		mm->context.cop_pid = COP_PID_NONE;
+	}
+
+	sync_cop(mm);
+
+	/*
+	 * If this is a threaded process then there might be other threads
+	 * running. We need to send an IPI to force them to pick up any
+	 * change in PID and ACOP.
+	 */
+	if (atomic_read(&mm->mm_users) > 1)
+		smp_call_function(sync_cop, mm, 1);
+
+	if (free_pid != COP_PID_NONE) {
+		spin_lock(&mmu_context_acop_lock);
+		ida_remove(&cop_ida, free_pid);
+		spin_unlock(&mmu_context_acop_lock);
+	}
+
+	spin_unlock(mm->context.cop_lockp);
+	up_read(&mm->mmap_sem);
+}
+EXPORT_SYMBOL_GPL(drop_cop);
+
+#endif /* CONFIG_PPC_ICSWX */
+
 static DEFINE_SPINLOCK(mmu_context_lock);
 static DEFINE_IDA(mmu_context_ida);
 
@@ -31,7 +227,6 @@ static DEFINE_IDA(mmu_context_ida);
  * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
  * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
  */
-#define NO_CONTEXT	0
 #define MAX_CONTEXT	((1UL << 19) - 1)
 
 int __init_new_context(void)
@@ -79,6 +274,16 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 		slice_set_user_psize(mm, mmu_virtual_psize);
 	subpage_prot_init_new_context(mm);
 	mm->context.id = index;
+#ifdef CONFIG_PPC_ICSWX
+	mm->context.cop_lockp = kmalloc(sizeof(spinlock_t), GFP_KERNEL);
+	if (!mm->context.cop_lockp) {
+		__destroy_context(index);
+		subpage_prot_free(mm);
+		mm->context.id = MMU_NO_CONTEXT;
+		return -ENOMEM;
+	}
+	spin_lock_init(mm->context.cop_lockp);
+#endif /* CONFIG_PPC_ICSWX */
 
 	return 0;
 }
@@ -93,7 +298,12 @@ EXPORT_SYMBOL_GPL(__destroy_context);
 
 void destroy_context(struct mm_struct *mm)
 {
+#ifdef CONFIG_PPC_ICSWX
+	drop_cop(mm->context.acop, mm);
+	kfree(mm->context.cop_lockp);
+	mm->context.cop_lockp = NULL;
+#endif /* CONFIG_PPC_ICSWX */
 	__destroy_context(mm->context.id);
 	subpage_prot_free(mm);
-	mm->context.id = NO_CONTEXT;
+	mm->context.id = MMU_NO_CONTEXT;
 }
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index c0aab52da3a..336807de550 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -338,12 +338,14 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 		return NOTIFY_OK;
 
 	switch (action) {
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
+	case CPU_UP_PREPARE:
+	case CPU_UP_PREPARE_FROZEN:
 		pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
 		stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
 		break;
 #ifdef CONFIG_HOTPLUG_CPU
+	case CPU_UP_CANCELED:
+	case CPU_UP_CANCELED_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
@@ -407,7 +409,17 @@ void __init mmu_context_init(void)
 	} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
 		first_context = 1;
 		last_context = 65535;
-	} else {
+	} else
+#ifdef CONFIG_PPC_BOOK3E_MMU
+	if (mmu_has_feature(MMU_FTR_TYPE_3E)) {
+		u32 mmucfg = mfspr(SPRN_MMUCFG);
+		u32 pid_bits = (mmucfg & MMUCFG_PIDSIZE_MASK)
+				>> MMUCFG_PIDSIZE_SHIFT;
+		first_context = 1;
+		last_context = (1UL << (pid_bits + 1)) - 1;
+	} else
+#endif
+	{
 		first_context = 1;
 		last_context = 255;
 	}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 0dc95c0aa3b..2164006fe17 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -311,14 +311,13 @@ EXPORT_SYMBOL_GPL(of_node_to_nid);
 static int __init find_min_common_depth(void)
 {
 	int depth;
-	struct device_node *rtas_root;
 	struct device_node *chosen;
+	struct device_node *root;
 	const char *vec5;
 
-	rtas_root = of_find_node_by_path("/rtas");
-
-	if (!rtas_root)
-		return -1;
+	root = of_find_node_by_path("/rtas");
+	if (!root)
+		root = of_find_node_by_path("/");
 
 	/*
 	 * This property is a set of 32-bit integers, each representing
@@ -332,7 +331,7 @@ static int __init find_min_common_depth(void)
 	 * NUMA boundary and the following are progressively less significant
 	 * boundaries. There can be more than one level of NUMA.
 	 */
-	distance_ref_points = of_get_property(rtas_root,
+	distance_ref_points = of_get_property(root,
 					"ibm,associativity-reference-points",
 					&distance_ref_points_depth);
 
@@ -376,11 +375,11 @@ static int __init find_min_common_depth(void)
 		distance_ref_points_depth = MAX_DISTANCE_REF_POINTS;
 	}
 
-	of_node_put(rtas_root);
+	of_node_put(root);
 	return depth;
 
 err:
-	of_node_put(rtas_root);
+	of_node_put(root);
 	return -1;
 }
 
@@ -440,11 +439,11 @@ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
 }
 
 /*
- * Retreive and validate the ibm,dynamic-memory property of the device tree.
+ * Retrieve and validate the ibm,dynamic-memory property of the device tree.
  *
  * The layout of the ibm,dynamic-memory property is a number N of memblock
  * list entries followed by N memblock list entries.  Each memblock list entry
- * contains information as layed out in the of_drconf_cell struct above.
+ * contains information as laid out in the of_drconf_cell struct above.
  */
 static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
 {
@@ -468,7 +467,7 @@ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
 }
 
 /*
- * Retreive and validate the ibm,lmb-size property for drconf memory
+ * Retrieve and validate the ibm,lmb-size property for drconf memory
  * from the device tree.
  */
 static u64 of_get_lmb_size(struct device_node *memory)
@@ -490,7 +489,7 @@ struct assoc_arrays {
 };
 
 /*
- * Retreive and validate the list of associativity arrays for drconf
+ * Retrieve and validate the list of associativity arrays for drconf
  * memory from the ibm,associativity-lookup-arrays property of the
  * device tree..
  *
@@ -604,7 +603,7 @@ static int __cpuinit cpu_numa_callback(struct notifier_block *nfb,
  * Returns the size the region should have to enforce the memory limit.
  * This will either be the original value of size, a truncated value,
  * or zero. If the returned value of size is 0 the region should be
- * discarded as it lies wholy above the memory limit.
+ * discarded as it lies wholly above the memory limit.
  */
 static unsigned long __init numa_enforce_memory_limit(unsigned long start,
 						      unsigned long size)
@@ -1453,7 +1452,7 @@ int arch_update_cpu_topology(void)
 	unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
 	struct sys_device *sysdev;
 
-	for_each_cpu_mask(cpu, cpu_associativity_changes_mask) {
+	for_each_cpu(cpu,&cpu_associativity_changes_mask) {
 		vphn_get_associativity(cpu, associativity);
 		nid = associativity_to_nid(associativity);
 
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 8dc41c0157f..51f87956f8f 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -133,7 +133,15 @@ ioremap(phys_addr_t addr, unsigned long size)
 EXPORT_SYMBOL(ioremap);
 
 void __iomem *
-ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
+ioremap_wc(phys_addr_t addr, unsigned long size)
+{
+	return __ioremap_caller(addr, size, _PAGE_NO_CACHE,
+				__builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_wc);
+
+void __iomem *
+ioremap_prot(phys_addr_t addr, unsigned long size, unsigned long flags)
 {
 	/* writeable implies dirty for kernel addresses */
 	if (flags & _PAGE_RW)
@@ -152,7 +160,7 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 
 	return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
 }
-EXPORT_SYMBOL(ioremap_flags);
+EXPORT_SYMBOL(ioremap_prot);
 
 void __iomem *
 __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 88927a05cdc..6e595f6496d 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -255,7 +255,17 @@ void __iomem * ioremap(phys_addr_t addr, unsigned long size)
 	return __ioremap_caller(addr, size, flags, caller);
 }
 
-void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
+void __iomem * ioremap_wc(phys_addr_t addr, unsigned long size)
+{
+	unsigned long flags = _PAGE_NO_CACHE;
+	void *caller = __builtin_return_address(0);
+
+	if (ppc_md.ioremap)
+		return ppc_md.ioremap(addr, size, flags, caller);
+	return __ioremap_caller(addr, size, flags, caller);
+}
+
+void __iomem * ioremap_prot(phys_addr_t addr, unsigned long size,
 			     unsigned long flags)
 {
 	void *caller = __builtin_return_address(0);
@@ -311,7 +321,8 @@ void iounmap(volatile void __iomem *token)
 }
 
 EXPORT_SYMBOL(ioremap);
-EXPORT_SYMBOL(ioremap_flags);
+EXPORT_SYMBOL(ioremap_wc);
+EXPORT_SYMBOL(ioremap_prot);
 EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(__ioremap_at);
 EXPORT_SYMBOL(iounmap);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 1d98ecc8eec..e22276cb67a 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -24,6 +24,7 @@
 #include <asm/firmware.h>
 #include <linux/compiler.h>
 #include <asm/udbg.h>
+#include <asm/code-patching.h>
 
 
 extern void slb_allocate_realmode(unsigned long ea);
@@ -166,7 +167,7 @@ static inline int esids_match(unsigned long addr1, unsigned long addr2)
 	int esid_1t_count;
 
 	/* System is not 1T segment size capable. */
-	if (!cpu_has_feature(CPU_FTR_1T_SEGMENT))
+	if (!mmu_has_feature(MMU_FTR_1T_SEGMENT))
 		return (GET_ESID(addr1) == GET_ESID(addr2));
 
 	esid_1t_count = (((addr1 >> SID_SHIFT_1T) != 0) +
@@ -201,7 +202,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 	 */
 	hard_irq_disable();
 	offset = get_paca()->slb_cache_ptr;
-	if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) &&
+	if (!mmu_has_feature(MMU_FTR_NO_SLBIE_B) &&
 	    offset <= SLB_CACHE_ENTRIES) {
 		int i;
 		asm volatile("isync" : : : "memory");
@@ -249,9 +250,8 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 static inline void patch_slb_encoding(unsigned int *insn_addr,
 				      unsigned int immed)
 {
-	*insn_addr = (*insn_addr & 0xffff0000) | immed;
-	flush_icache_range((unsigned long)insn_addr, 4+
-			   (unsigned long)insn_addr);
+	int insn = (*insn_addr & 0xffff0000) | immed;
+	patch_instruction(insn_addr, insn);
 }
 
 void slb_set_size(u16 size)
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 95ce3558169..ef653dc95b6 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -58,7 +58,7 @@ _GLOBAL(slb_miss_kernel_load_linear)
 	li	r11,0
 BEGIN_FTR_SECTION
 	b	slb_finish_load
-END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load_1T
 
 1:
@@ -87,7 +87,7 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
 6:
 BEGIN_FTR_SECTION
 	b	slb_finish_load
-END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load_1T
 
 0:	/* user address: proto-VSID = context << 15 | ESID. First check
@@ -138,11 +138,11 @@ END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
 	ld	r9,PACACONTEXTID(r13)
 BEGIN_FTR_SECTION
 	cmpldi	r10,0x1000
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	rldimi	r10,r9,USER_ESID_BITS,0
 BEGIN_FTR_SECTION
 	bge	slb_finish_load_1T
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load
 
 8:	/* invalid EA */
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 446a01842a7..41e31642a86 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -243,7 +243,7 @@ void __init stabs_alloc(void)
 {
 	int cpu;
 
-	if (cpu_has_feature(CPU_FTR_SLB))
+	if (mmu_has_feature(MMU_FTR_SLB))
 		return;
 
 	for_each_possible_cpu(cpu) {
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 8526bd9d2aa..af089220941 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -192,7 +192,7 @@ normal_tlb_miss:
 	or	r10,r15,r14
 
 BEGIN_MMU_FTR_SECTION
-	/* Set the TLB reservation and seach for existing entry. Then load
+	/* Set the TLB reservation and search for existing entry. Then load
 	 * the entry.
 	 */
 	PPC_TLBSRX_DOT(0,r16)
@@ -425,13 +425,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
 
 virt_page_table_tlb_miss_fault:
 	/* If we fault here, things are a little bit tricky. We need to call
-	 * either data or instruction store fault, and we need to retreive
+	 * either data or instruction store fault, and we need to retrieve
 	 * the original fault address and ESR (for data).
 	 *
 	 * The thing is, we know that in normal circumstances, this is
 	 * always called as a second level tlb miss for SW load or as a first
 	 * level TLB miss for HW load, so we should be able to peek at the
-	 * relevant informations in the first exception frame in the PACA.
+	 * relevant information in the first exception frame in the PACA.
 	 *
 	 * However, we do need to double check that, because we may just hit
 	 * a stray kernel pointer or a userland attack trying to hit those
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index c4d2b716756..cb515cff745 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -67,7 +67,7 @@
 
 #define MAX_SPU_COUNT 0xFFFFFF	/* maximum 24 bit LFSR value */
 
-/* Minumum HW interval timer setting to send value to trace buffer is 10 cycle.
+/* Minimum HW interval timer setting to send value to trace buffer is 10 cycle.
  * To configure counter to send value every N cycles set counter to
  * 2^32 - 1 - N.
  */
@@ -1470,7 +1470,7 @@ static int cell_global_start(struct op_counter_config *ctr)
  * trace buffer at the maximum rate possible.  The trace buffer is configured
  * to store the PCs, wrapping when it is full.  The performance counter is
  * initialized to the max hardware count minus the number of events, N, between
- * samples.  Once the N events have occured, a HW counter overflow occurs
+ * samples.  Once the N events have occurred, a HW counter overflow occurs
  * causing the generation of a HW counter interrupt which also stops the
  * writing of the SPU PC values to the trace buffer.  Hence the last PC
  * written to the trace buffer is the SPU PC that we want.  Unfortunately,
@@ -1656,7 +1656,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs,
 		 * The counters were frozen by the interrupt.
 		 * Reenable the interrupt and restart the counters.
 		 * If there was a race between the interrupt handler and
-		 * the virtual counter routine.	 The virutal counter
+		 * the virtual counter routine.	 The virtual counter
 		 * routine may have cleared the interrupts.  Hence must
 		 * use the virt_cntr_inter_mask to re-enable the interrupts.
 		 */
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 80774092db7..8ee51a252cf 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -207,7 +207,7 @@ static unsigned long get_pc(struct pt_regs *regs)
 	unsigned long mmcra;
 	unsigned long slot;
 
-	/* Cant do much about it */
+	/* Can't do much about it */
 	if (!cur_cpu_spec->oprofile_mmcra_sihv)
 		return pc;
 
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
index aa46e9d1e77..19395f18b1d 100644
--- a/arch/powerpc/platforms/44x/iss4xx.c
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -87,7 +87,7 @@ static void __cpuinit smp_iss4xx_setup_cpu(int cpu)
 	mpic_setup_this_cpu();
 }
 
-static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
+static int __cpuinit smp_iss4xx_kick_cpu(int cpu)
 {
 	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
 	const u64 *spin_table_addr_prop;
@@ -104,7 +104,7 @@ static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
 					       NULL);
 	if (spin_table_addr_prop == NULL) {
 		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);
-		return;
+		return -ENOENT;
 	}
 
 	/* Assume it's mapped as part of the linear mapping. This is a bit
@@ -117,6 +117,8 @@ static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
 	smp_wmb();
 	spin_table[1] = __pa(start_secondary_47x);
 	mb();
+
+	return 0;
 }
 
 static struct smp_ops_t iss_smp_ops = {
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index cfc4b200998..9f09319352c 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -61,7 +61,7 @@ irq_to_pic_bit(unsigned int irq)
 static void
 cpld_mask_irq(struct irq_data *d)
 {
-	unsigned int cpld_irq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int cpld_irq = (unsigned int)irqd_to_hwirq(d);
 	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
 
 	out_8(pic_mask,
@@ -71,7 +71,7 @@ cpld_mask_irq(struct irq_data *d)
 static void
 cpld_unmask_irq(struct irq_data *d)
 {
-	unsigned int cpld_irq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int cpld_irq = (unsigned int)irqd_to_hwirq(d);
 	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
 
 	out_8(pic_mask,
@@ -97,7 +97,7 @@ cpld_pic_get_irq(int offset, u8 ignore, u8 __iomem *statusp,
 	status |= (ignore | mask);
 
 	if (status == 0xff)
-		return NO_IRQ_IGNORE;
+		return NO_IRQ;
 
 	cpld_irq = ffz(status) + offset;
 
@@ -109,14 +109,14 @@ cpld_pic_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
 		&cpld_regs->pci_mask);
-	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+	if (irq != NO_IRQ) {
 		generic_handle_irq(irq);
 		return;
 	}
 
 	irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
 		&cpld_regs->misc_mask);
-	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+	if (irq != NO_IRQ) {
 		generic_handle_irq(irq);
 		return;
 	}
diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c
index 57a6a349e93..96f85e5e0cd 100644
--- a/arch/powerpc/platforms/52xx/media5200.c
+++ b/arch/powerpc/platforms/52xx/media5200.c
@@ -56,7 +56,7 @@ static void media5200_irq_unmask(struct irq_data *d)
 
 	spin_lock_irqsave(&media5200_irq.lock, flags);
 	val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
-	val |= 1 << (MEDIA5200_IRQ_SHIFT + irq_map[d->irq].hwirq);
+	val |= 1 << (MEDIA5200_IRQ_SHIFT + irqd_to_hwirq(d));
 	out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val);
 	spin_unlock_irqrestore(&media5200_irq.lock, flags);
 }
@@ -68,7 +68,7 @@ static void media5200_irq_mask(struct irq_data *d)
 
 	spin_lock_irqsave(&media5200_irq.lock, flags);
 	val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE);
-	val &= ~(1 << (MEDIA5200_IRQ_SHIFT + irq_map[d->irq].hwirq));
+	val &= ~(1 << (MEDIA5200_IRQ_SHIFT + irqd_to_hwirq(d)));
 	out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val);
 	spin_unlock_irqrestore(&media5200_irq.lock, flags);
 }
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index 6385d883cb8..9940ce8a2d4 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -57,7 +57,7 @@ struct mpc52xx_lpbfifo {
 static struct mpc52xx_lpbfifo lpbfifo;
 
 /**
- * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transfered
+ * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transferred
  */
 static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
 {
@@ -179,7 +179,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
  *
  * On transmit, the dma completion irq triggers before the fifo completion
  * triggers.  Handle the dma completion here instead of the LPB FIFO Bestcomm
- * task completion irq becuase everyting is not really done until the LPB FIFO
+ * task completion irq because everything is not really done until the LPB FIFO
  * completion irq triggers.
  *
  * In other words:
@@ -195,7 +195,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
  * Exit conditions:
  * 1) Transfer aborted
  * 2) FIFO complete without DMA; more data to do
- * 3) FIFO complete without DMA; all data transfered
+ * 3) FIFO complete without DMA; all data transferred
  * 4) FIFO complete using DMA
  *
  * Condition 1 can occur regardless of whether or not DMA is used.
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 3ddea96273c..1a9a4957057 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -157,48 +157,30 @@ static inline void io_be_clrbit(u32 __iomem *addr, int bitno)
  */
 static void mpc52xx_extirq_mask(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_clrbit(&intr->ctrl, 11 - l2irq);
 }
 
 static void mpc52xx_extirq_unmask(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_setbit(&intr->ctrl, 11 - l2irq);
 }
 
 static void mpc52xx_extirq_ack(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_setbit(&intr->ctrl, 27-l2irq);
 }
 
 static int mpc52xx_extirq_set_type(struct irq_data *d, unsigned int flow_type)
 {
 	u32 ctrl_reg, type;
-	int irq;
-	int l2irq;
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	void *handler = handle_level_irq;
 
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
-	pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__, irq, l2irq, flow_type);
+	pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__,
+		(int) irqd_to_hwirq(d), l2irq, flow_type);
 
 	switch (flow_type) {
 	case IRQF_TRIGGER_HIGH: type = 0; break;
@@ -237,23 +219,13 @@ static int mpc52xx_null_set_type(struct irq_data *d, unsigned int flow_type)
 
 static void mpc52xx_main_mask(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_setbit(&intr->main_mask, 16 - l2irq);
 }
 
 static void mpc52xx_main_unmask(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_clrbit(&intr->main_mask, 16 - l2irq);
 }
 
@@ -270,23 +242,13 @@ static struct irq_chip mpc52xx_main_irqchip = {
  */
 static void mpc52xx_periph_mask(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_setbit(&intr->per_mask, 31 - l2irq);
 }
 
 static void mpc52xx_periph_unmask(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_clrbit(&intr->per_mask, 31 - l2irq);
 }
 
@@ -303,34 +265,19 @@ static struct irq_chip mpc52xx_periph_irqchip = {
  */
 static void mpc52xx_sdma_mask(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_setbit(&sdma->IntMask, l2irq);
 }
 
 static void mpc52xx_sdma_unmask(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	io_be_clrbit(&sdma->IntMask, l2irq);
 }
 
 static void mpc52xx_sdma_ack(struct irq_data *d)
 {
-	int irq;
-	int l2irq;
-
-	irq = irq_map[d->irq].hwirq;
-	l2irq = irq & MPC52xx_IRQ_L2_MASK;
-
+	int l2irq = irqd_to_hwirq(d) & MPC52xx_IRQ_L2_MASK;
 	out_be32(&sdma->IntPend, 1 << l2irq);
 }
 
@@ -512,7 +459,7 @@ void __init mpc52xx_init_irq(void)
 /**
  * mpc52xx_get_irq - Get pending interrupt number hook function
  *
- * Called by the interupt handler to determine what IRQ handler needs to be
+ * Called by the interrupt handler to determine what IRQ handler needs to be
  * executed.
  *
  * Status of pending interrupts is determined by reading the encoded status
@@ -539,7 +486,7 @@ void __init mpc52xx_init_irq(void)
 unsigned int mpc52xx_get_irq(void)
 {
 	u32 status;
-	int irq = NO_IRQ_IGNORE;
+	int irq;
 
 	status = in_be32(&intr->enc_status);
 	if (status & 0x00000400) {	/* critical */
@@ -562,6 +509,8 @@ unsigned int mpc52xx_get_irq(void)
 		} else {
 			irq |= (MPC52xx_IRQ_L1_PERP << MPC52xx_IRQ_L1_OFFSET);
 		}
+	} else {
+		return NO_IRQ;
 	}
 
 	return irq_linear_revmap(mpc52xx_irqhost, irq);
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 4a4eb6ffa12..8ccf9ed62fe 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -42,7 +42,7 @@ struct pq2ads_pci_pic {
 static void pq2ads_pci_mask_irq(struct irq_data *d)
 {
 	struct pq2ads_pci_pic *priv = irq_data_get_irq_chip_data(d);
-	int irq = NUM_IRQS - virq_to_hw(d->irq) - 1;
+	int irq = NUM_IRQS - irqd_to_hwirq(d) - 1;
 
 	if (irq != -1) {
 		unsigned long flags;
@@ -58,7 +58,7 @@ static void pq2ads_pci_mask_irq(struct irq_data *d)
 static void pq2ads_pci_unmask_irq(struct irq_data *d)
 {
 	struct pq2ads_pci_pic *priv = irq_data_get_irq_chip_data(d);
-	int irq = NUM_IRQS - virq_to_hw(d->irq) - 1;
+	int irq = NUM_IRQS - irqd_to_hwirq(d) - 1;
 
 	if (irq != -1) {
 		unsigned long flags;
@@ -112,16 +112,8 @@ static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
 	return 0;
 }
 
-static void pci_host_unmap(struct irq_host *h, unsigned int virq)
-{
-	/* remove chip and handler */
-	irq_set_chip_data(virq, NULL);
-	irq_set_chip(virq, NULL);
-}
-
 static struct irq_host_ops pci_pic_host_ops = {
 	.map = pci_pic_host_map,
-	.unmap = pci_host_unmap,
 };
 
 int __init pq2ads_pci_init_irq(void)
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 188272934cf..104faa8aa23 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -318,17 +318,20 @@ static const struct platform_suspend_ops mpc83xx_suspend_ops = {
 	.end = mpc83xx_suspend_end,
 };
 
+static struct of_device_id pmc_match[];
 static int pmc_probe(struct platform_device *ofdev)
 {
+	const struct of_device_id *match;
 	struct device_node *np = ofdev->dev.of_node;
 	struct resource res;
 	struct pmc_type *type;
 	int ret = 0;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(pmc_match, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
 
-	type = ofdev->dev.of_match->data;
+	type = match->data;
 
 	if (!of_device_is_available(np))
 		return -ENODEV;
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 0d00ff9d05a..d6a93a10c0f 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -41,7 +41,7 @@ extern void __early_start(void);
 #define NUM_BOOT_ENTRY		8
 #define SIZE_BOOT_ENTRY		(NUM_BOOT_ENTRY * sizeof(u32))
 
-static void __init
+static int __init
 smp_85xx_kick_cpu(int nr)
 {
 	unsigned long flags;
@@ -60,7 +60,7 @@ smp_85xx_kick_cpu(int nr)
 
 	if (cpu_rel_addr == NULL) {
 		printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
-		return;
+		return -ENOENT;
 	}
 
 	/*
@@ -107,6 +107,8 @@ smp_85xx_kick_cpu(int nr)
 		iounmap(bptr_vaddr);
 
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
+
+	return 0;
 }
 
 static void __init
@@ -233,8 +235,10 @@ void __init mpc85xx_smp_init(void)
 		smp_85xx_ops.message_pass = smp_mpic_message_pass;
 	}
 
-	if (cpu_has_feature(CPU_FTR_DBELL))
-		smp_85xx_ops.message_pass = doorbell_message_pass;
+	if (cpu_has_feature(CPU_FTR_DBELL)) {
+		smp_85xx_ops.message_pass = smp_muxed_ipi_message_pass;
+		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
+	}
 
 	BUG_ON(!smp_85xx_ops.message_pass);
 
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index db864623b4a..12cb9bb2cc6 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -48,8 +48,6 @@ static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
 	[8] = {0, IRQ_TYPE_LEVEL_HIGH},
 };
 
-#define socrates_fpga_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
-
 static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock);
 
 static void __iomem *socrates_fpga_pic_iobase;
@@ -110,11 +108,9 @@ void socrates_fpga_pic_cascade(unsigned int irq, struct irq_desc *desc)
 static void socrates_fpga_pic_ack(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int hwirq, irq_line;
+	unsigned int irq_line, hwirq = irqd_to_hwirq(d);
 	uint32_t mask;
 
-	hwirq = socrates_fpga_irq_to_hw(d->irq);
-
 	irq_line = fpga_irqs[hwirq].irq_line;
 	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -127,12 +123,10 @@ static void socrates_fpga_pic_ack(struct irq_data *d)
 static void socrates_fpga_pic_mask(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int hwirq;
+	unsigned int hwirq = irqd_to_hwirq(d);
 	int irq_line;
 	u32 mask;
 
-	hwirq = socrates_fpga_irq_to_hw(d->irq);
-
 	irq_line = fpga_irqs[hwirq].irq_line;
 	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -145,12 +139,10 @@ static void socrates_fpga_pic_mask(struct irq_data *d)
 static void socrates_fpga_pic_mask_ack(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int hwirq;
+	unsigned int hwirq = irqd_to_hwirq(d);
 	int irq_line;
 	u32 mask;
 
-	hwirq = socrates_fpga_irq_to_hw(d->irq);
-
 	irq_line = fpga_irqs[hwirq].irq_line;
 	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -164,12 +156,10 @@ static void socrates_fpga_pic_mask_ack(struct irq_data *d)
 static void socrates_fpga_pic_unmask(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int hwirq;
+	unsigned int hwirq = irqd_to_hwirq(d);
 	int irq_line;
 	u32 mask;
 
-	hwirq = socrates_fpga_irq_to_hw(d->irq);
-
 	irq_line = fpga_irqs[hwirq].irq_line;
 	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -182,12 +172,10 @@ static void socrates_fpga_pic_unmask(struct irq_data *d)
 static void socrates_fpga_pic_eoi(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int hwirq;
+	unsigned int hwirq = irqd_to_hwirq(d);
 	int irq_line;
 	u32 mask;
 
-	hwirq = socrates_fpga_irq_to_hw(d->irq);
-
 	irq_line = fpga_irqs[hwirq].irq_line;
 	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
@@ -201,12 +189,10 @@ static int socrates_fpga_pic_set_type(struct irq_data *d,
 		unsigned int flow_type)
 {
 	unsigned long flags;
-	unsigned int hwirq;
+	unsigned int hwirq = irqd_to_hwirq(d);
 	int polarity;
 	u32 mask;
 
-	hwirq = socrates_fpga_irq_to_hw(d->irq);
-
 	if (fpga_irqs[hwirq].type != IRQ_TYPE_NONE)
 		return -EINVAL;
 
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 0beec7d5566..94594e58594 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -46,8 +46,6 @@
 #define GEF_PIC_CPU0_MCP_MASK	GEF_PIC_MCP_MASK(0)
 #define GEF_PIC_CPU1_MCP_MASK	GEF_PIC_MCP_MASK(1)
 
-#define gef_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
-
 
 static DEFINE_RAW_SPINLOCK(gef_pic_lock);
 
@@ -113,11 +111,9 @@ void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
 static void gef_pic_mask(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int hwirq;
+	unsigned int hwirq = irqd_to_hwirq(d);
 	u32 mask;
 
-	hwirq = gef_irq_to_hw(d->irq);
-
 	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
 	mask &= ~(1 << hwirq);
@@ -136,11 +132,9 @@ static void gef_pic_mask_ack(struct irq_data *d)
 static void gef_pic_unmask(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int hwirq;
+	unsigned int hwirq = irqd_to_hwirq(d);
 	u32 mask;
 
-	hwirq = gef_irq_to_hw(d->irq);
-
 	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
 	mask |= (1 << hwirq);
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 018cc67be42..a896511690c 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -66,7 +66,7 @@ static void __init mpc8610_suspend_init(void)
 		return;
 	}
 
-	ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL);
+	ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9:wakeup", NULL);
 	if (ret) {
 		pr_err("%s: can't request pixis event IRQ: %d\n",
 		       __func__, ret);
@@ -105,45 +105,77 @@ machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
-static u32 get_busfreq(void)
-{
-	struct device_node *node;
-
-	u32 fs_busfreq = 0;
-	node = of_find_node_by_type(NULL, "cpu");
-	if (node) {
-		unsigned int size;
-		const unsigned int *prop =
-			of_get_property(node, "bus-frequency", &size);
-		if (prop)
-			fs_busfreq = *prop;
-		of_node_put(node);
-	};
-	return fs_busfreq;
-}
+/*
+ * DIU Area Descriptor
+ *
+ * The MPC8610 reference manual shows the bits of the AD register in
+ * little-endian order, which causes the BLUE_C field to be split into two
+ * parts. To simplify the definition of the MAKE_AD() macro, we define the
+ * fields in big-endian order and byte-swap the result.
+ *
+ * So even though the registers don't look like they're in the
+ * same bit positions as they are on the P1022, the same value is written to
+ * the AD register on the MPC8610 and on the P1022.
+ */
+#define AD_BYTE_F		0x10000000
+#define AD_ALPHA_C_MASK		0x0E000000
+#define AD_ALPHA_C_SHIFT	25
+#define AD_BLUE_C_MASK		0x01800000
+#define AD_BLUE_C_SHIFT		23
+#define AD_GREEN_C_MASK		0x00600000
+#define AD_GREEN_C_SHIFT	21
+#define AD_RED_C_MASK		0x00180000
+#define AD_RED_C_SHIFT		19
+#define AD_PALETTE		0x00040000
+#define AD_PIXEL_S_MASK		0x00030000
+#define AD_PIXEL_S_SHIFT	16
+#define AD_COMP_3_MASK		0x0000F000
+#define AD_COMP_3_SHIFT		12
+#define AD_COMP_2_MASK		0x00000F00
+#define AD_COMP_2_SHIFT		8
+#define AD_COMP_1_MASK		0x000000F0
+#define AD_COMP_1_SHIFT		4
+#define AD_COMP_0_MASK		0x0000000F
+#define AD_COMP_0_SHIFT		0
+
+#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \
+	cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \
+	(blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \
+	(red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \
+	(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
+	(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
 
 unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
 						int monitor_port)
 {
 	static const unsigned long pixelformat[][3] = {
-		{0x88882317, 0x88083218, 0x65052119},
-		{0x88883316, 0x88082219, 0x65053118},
+		{
+			MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8),
+			MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0),
+			MAKE_AD(4, 0, 2, 1, 1, 5, 6, 5, 0)
+		},
+		{
+			MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8),
+			MAKE_AD(4, 0, 2, 1, 2, 8, 8, 8, 0),
+			MAKE_AD(4, 2, 0, 1, 1, 5, 6, 5, 0)
+		},
 	};
-	unsigned int pix_fmt, arch_monitor;
+	unsigned int arch_monitor;
 
+	/* The DVI port is mis-wired on revision 1 of this board. */
 	arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
-		/* DVI port for board version 0x01 */
-
-	if (bits_per_pixel == 32)
-		pix_fmt = pixelformat[arch_monitor][0];
-	else if (bits_per_pixel == 24)
-		pix_fmt = pixelformat[arch_monitor][1];
-	else if (bits_per_pixel == 16)
-		pix_fmt = pixelformat[arch_monitor][2];
-	else
-		pix_fmt = pixelformat[1][0];
-
-	return pix_fmt;
+
+	switch (bits_per_pixel) {
+	case 32:
+		return pixelformat[arch_monitor][0];
+	case 24:
+		return pixelformat[arch_monitor][1];
+	case 16:
+		return pixelformat[arch_monitor][2];
+	default:
+		pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel);
+		return 0;
+	}
 }
 
 void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
@@ -190,8 +222,7 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
 	}
 
 	/* Pixel Clock configuration */
-	pr_debug("DIU: Bus Frequency = %d\n", get_busfreq());
-	speed_ccb = get_busfreq();
+	speed_ccb = fsl_get_sys_freq();
 
 	/* Calculate the pixel clock with the smallest error */
 	/* calculate the following in steps to avoid overflow */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index eacea0e3fcc..af09baee22c 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -56,7 +56,7 @@ smp_86xx_release_core(int nr)
 }
 
 
-static void __init
+static int __init
 smp_86xx_kick_cpu(int nr)
 {
 	unsigned int save_vector;
@@ -65,7 +65,7 @@ smp_86xx_kick_cpu(int nr)
 	unsigned int *vector = (unsigned int *)(KERNELBASE + 0x100);
 
 	if (nr < 0 || nr >= NR_CPUS)
-		return;
+		return -ENOENT;
 
 	pr_debug("smp_86xx_kick_cpu: kick CPU #%d\n", nr);
 
@@ -92,6 +92,8 @@ smp_86xx_kick_cpu(int nr)
 	local_irq_restore(flags);
 
 	pr_debug("wait CPU #%d for %d msecs.\n", nr, n);
+
+	return 0;
 }
 
 
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 9ecce995dd4..1e121088826 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -150,7 +150,7 @@ void __init mpc8xx_calibrate_decr(void)
 	 */
 	cpu = of_find_node_by_type(NULL, "cpu");
 	virq= irq_of_parse_and_map(cpu, 0);
-	irq = irq_map[virq].hwirq;
+	irq = virq_to_hw(virq);
 
 	sys_tmr2 = immr_map(im_sit);
 	out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 20576829eca..f970ca2b180 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -20,6 +20,7 @@ source "arch/powerpc/platforms/embedded6xx/Kconfig"
 source "arch/powerpc/platforms/44x/Kconfig"
 source "arch/powerpc/platforms/40x/Kconfig"
 source "arch/powerpc/platforms/amigaone/Kconfig"
+source "arch/powerpc/platforms/wsp/Kconfig"
 
 config KVM_GUEST
 	bool "KVM Guest support"
@@ -46,7 +47,7 @@ config PPC_OF_BOOT_TRAMPOLINE
 	help
 	  Support from booting from Open Firmware or yaboot using an
 	  Open Firmware client interface. This enables the kernel to
-	  communicate with open firmware to retrieve system informations
+	  communicate with open firmware to retrieve system information
 	  such as the device tree.
 
 	  In case of doubt, say Y
@@ -56,16 +57,19 @@ config UDBG_RTAS_CONSOLE
 	depends on PPC_RTAS
 	default n
 
+config PPC_SMP_MUXED_IPI
+	bool
+	help
+	  Select this opton if your platform supports SMP and your
+	  interrupt controller provides less than 4 interrupts to each
+	  cpu.	This will enable the generic code to multiplex the 4
+	  messages on to one ipi.
+
 config PPC_UDBG_BEAT
 	bool "BEAT based debug console"
 	depends on PPC_CELLEB
 	default n
 
-config XICS
-	depends on PPC_PSERIES
-	bool
-	default y
-
 config IPIC
 	bool
 	default n
@@ -147,14 +151,27 @@ config PPC_970_NAP
 	bool
 	default n
 
+config PPC_P7_NAP
+	bool
+	default n
+
 config PPC_INDIRECT_IO
 	bool
 	select GENERIC_IOMAP
-	default n
+
+config PPC_INDIRECT_PIO
+	bool
+	select PPC_INDIRECT_IO
+
+config PPC_INDIRECT_MMIO
+	bool
+	select PPC_INDIRECT_IO
+
+config PPC_IO_WORKAROUNDS
+	bool
 
 config GENERIC_IOMAP
 	bool
-	default n
 
 source "drivers/cpufreq/Kconfig"
 
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 111138c55f9..2165b65876f 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -73,6 +73,7 @@ config PPC_BOOK3S_64
 config PPC_BOOK3E_64
 	bool "Embedded processors"
 	select PPC_FPU # Make it a choice ?
+	select PPC_SMP_MUXED_IPI
 
 endchoice
 
@@ -107,6 +108,10 @@ config POWER4
 	depends on PPC64 && PPC_BOOK3S
 	def_bool y
 
+config PPC_A2
+	bool
+	depends on PPC_BOOK3E_64
+
 config TUNE_CELL
 	bool "Optimize for Cell Broadband Engine"
 	depends on PPC64 && PPC_BOOK3S
@@ -174,6 +179,7 @@ config FSL_BOOKE
 config PPC_FSL_BOOK3E
 	bool
 	select FSL_EMB_PERFMON
+	select PPC_SMP_MUXED_IPI
 	default y if FSL_BOOKE
 
 config PTE_64BIT
@@ -226,6 +232,24 @@ config VSX
 
 	  If in doubt, say Y here.
 
+config PPC_ICSWX
+	bool "Support for PowerPC icswx coprocessor instruction"
+	depends on POWER4
+	default n
+	---help---
+
+	  This option enables kernel support for the PowerPC Initiate
+	  Coprocessor Store Word (icswx) coprocessor instruction on POWER7
+	  or newer processors.
+
+	  This option is only useful if you have a processor that supports
+	  the icswx coprocessor instruction. It does not have any effect
+	  on processors without the icswx coprocessor instruction.
+
+	  This option slightly increases kernel memory usage.
+
+	  If in doubt, say N here.
+
 config SPE
 	bool "SPE Support"
 	depends on E200 || (E500 && !PPC_E500MC)
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index fdb9f0b0d7a..73e2116cfee 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_PPC_CELL)		+= cell/
 obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_EMBEDDED6xx)	+= embedded6xx/
 obj-$(CONFIG_AMIGAONE)		+= amigaone/
+obj-$(CONFIG_PPC_WSP)		+= wsp/
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 81239ebed83..67d5009b4e8 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -6,7 +6,8 @@ config PPC_CELL_COMMON
 	bool
 	select PPC_CELL
 	select PPC_DCR_MMIO
-	select PPC_INDIRECT_IO
+	select PPC_INDIRECT_PIO
+	select PPC_INDIRECT_MMIO
 	select PPC_NATIVE
 	select PPC_RTAS
 	select IRQ_EDGE_EOI_HANDLER
@@ -15,6 +16,7 @@ config PPC_CELL_NATIVE
 	bool
 	select PPC_CELL_COMMON
 	select MPIC
+	select PPC_IO_WORKAROUNDS
 	select IBM_NEW_EMAC_EMAC4
 	select IBM_NEW_EMAC_RGMII
 	select IBM_NEW_EMAC_ZMII #test only
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 83fafe92264..a4a89350bcf 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -1,7 +1,7 @@
 obj-$(CONFIG_PPC_CELL_COMMON)		+= cbe_regs.o interrupt.o pervasive.o
 
 obj-$(CONFIG_PPC_CELL_NATIVE)		+= iommu.o setup.o spider-pic.o \
-					   pmu.o io-workarounds.o spider-pci.o
+					   pmu.o spider-pci.o
 obj-$(CONFIG_CBE_RAS)			+= ras.o
 
 obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
@@ -39,11 +39,10 @@ obj-y					+= celleb_setup.o \
 					   celleb_pci.o celleb_scc_epci.o \
 					   celleb_scc_pciex.o \
 					   celleb_scc_uhc.o \
-					   io-workarounds.o spider-pci.o \
-					   beat.o beat_htab.o beat_hvCall.o \
-					   beat_interrupt.o beat_iommu.o
+					   spider-pci.o beat.o beat_htab.o \
+					   beat_hvCall.o beat_interrupt.o \
+					   beat_iommu.o
 
-obj-$(CONFIG_SMP)			+= beat_smp.o
 obj-$(CONFIG_PPC_UDBG_BEAT)		+= beat_udbg.o
 obj-$(CONFIG_SERIAL_TXX9)		+= celleb_scc_sio.o
 obj-$(CONFIG_SPU_BASE)			+= beat_spu_priv1.o
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index bb5ebf8fa80..ac06903e136 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -113,7 +113,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
-		if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
+		if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) {
 			generic_handle_irq(msi);
 			msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
 		} else {
@@ -320,6 +320,7 @@ static struct irq_chip msic_irq_chip = {
 static int msic_host_map(struct irq_host *h, unsigned int virq,
 			 irq_hw_number_t hw)
 {
+	irq_set_chip_data(virq, h->host_data);
 	irq_set_chip_and_handler(virq, &msic_irq_chip, handle_simple_irq);
 
 	return 0;
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index 4cb9e147c30..55015e1f693 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -148,16 +148,6 @@ static int beatic_pic_host_map(struct irq_host *h, unsigned int virq,
 }
 
 /*
- * Update binding hardware IRQ number (hw) and Virtuql
- * IRQ number (virq). This is called only once for a given mapping.
- */
-static void beatic_pic_host_remap(struct irq_host *h, unsigned int virq,
-			       irq_hw_number_t hw)
-{
-	beat_construct_and_connect_irq_plug(virq, hw);
-}
-
-/*
  * Translate device-tree interrupt spec to irq_hw_number_t style (ulong),
  * to pass away to irq_create_mapping().
  *
@@ -184,7 +174,6 @@ static int beatic_pic_host_match(struct irq_host *h, struct device_node *np)
 
 static struct irq_host_ops beatic_pic_host_ops = {
 	.map = beatic_pic_host_map,
-	.remap = beatic_pic_host_remap,
 	.unmap = beatic_pic_host_unmap,
 	.xlate = beatic_pic_host_xlate,
 	.match = beatic_pic_host_match,
@@ -257,22 +246,6 @@ void __init beatic_init_IRQ(void)
 	irq_set_default_host(beatic_host);
 }
 
-#ifdef CONFIG_SMP
-
-/* Nullified to compile with SMP mode */
-void beatic_setup_cpu(int cpu)
-{
-}
-
-void beatic_cause_IPI(int cpu, int mesg)
-{
-}
-
-void beatic_request_IPIs(void)
-{
-}
-#endif /* CONFIG_SMP */
-
 void beatic_deinit_IRQ(void)
 {
 	int	i;
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.h b/arch/powerpc/platforms/cell/beat_interrupt.h
index b470fd0051f..a7e52f91a07 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.h
+++ b/arch/powerpc/platforms/cell/beat_interrupt.h
@@ -24,9 +24,6 @@
 
 extern void beatic_init_IRQ(void);
 extern unsigned int beatic_get_irq(void);
-extern void beatic_cause_IPI(int cpu, int mesg);
-extern void beatic_request_IPIs(void);
-extern void beatic_setup_cpu(int);
 extern void beatic_deinit_IRQ(void);
 
 #endif
diff --git a/arch/powerpc/platforms/cell/beat_smp.c b/arch/powerpc/platforms/cell/beat_smp.c
deleted file mode 100644
index 26efc204c47..00000000000
--- a/arch/powerpc/platforms/cell/beat_smp.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * SMP support for Celleb platform. (Incomplete)
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on arch/powerpc/platforms/cell/smp.c:
- * Dave Engebretsen, Peter Bergner, and
- * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
- * Plus various changes from other IBM teams...
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/cpu.h>
-
-#include <asm/irq.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "beat_interrupt.h"
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-/*
- * The primary thread of each non-boot processor is recorded here before
- * smp init.
- */
-/* static cpumask_t of_spin_map; */
-
-/**
- * smp_startup_cpu() - start the given cpu
- *
- * At boot time, there is nothing to do for primary threads which were
- * started from Open Firmware.  For anything else, call RTAS with the
- * appropriate start location.
- *
- * Returns:
- *	0	- failure
- *	1	- success
- */
-static inline int __devinit smp_startup_cpu(unsigned int lcpu)
-{
-	return 0;
-}
-
-static void smp_beatic_message_pass(int target, int msg)
-{
-	unsigned int i;
-
-	if (target < NR_CPUS) {
-		beatic_cause_IPI(target, msg);
-	} else {
-		for_each_online_cpu(i) {
-			if (target == MSG_ALL_BUT_SELF
-			    && i == smp_processor_id())
-				continue;
-			beatic_cause_IPI(i, msg);
-		}
-	}
-}
-
-static int __init smp_beatic_probe(void)
-{
-	return cpus_weight(cpu_possible_map);
-}
-
-static void __devinit smp_beatic_setup_cpu(int cpu)
-{
-	beatic_setup_cpu(cpu);
-}
-
-static void __devinit smp_celleb_kick_cpu(int nr)
-{
-	BUG_ON(nr < 0 || nr >= NR_CPUS);
-
-	if (!smp_startup_cpu(nr))
-		return;
-}
-
-static int smp_celleb_cpu_bootable(unsigned int nr)
-{
-	return 1;
-}
-static struct smp_ops_t bpa_beatic_smp_ops = {
-	.message_pass	= smp_beatic_message_pass,
-	.probe		= smp_beatic_probe,
-	.kick_cpu	= smp_celleb_kick_cpu,
-	.setup_cpu	= smp_beatic_setup_cpu,
-	.cpu_bootable	= smp_celleb_cpu_bootable,
-};
-
-/* This is called very early */
-void __init smp_init_celleb(void)
-{
-	DBG(" -> smp_init_celleb()\n");
-
-	smp_ops = &bpa_beatic_smp_ops;
-
-	DBG(" <- smp_init_celleb()\n");
-}
diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c
index dbc338f187a..f3917e7a5b4 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.c
+++ b/arch/powerpc/platforms/cell/cbe_regs.c
@@ -45,8 +45,8 @@ static struct cbe_thread_map
 	unsigned int cbe_id;
 } cbe_thread_map[NR_CPUS];
 
-static cpumask_t cbe_local_mask[MAX_CBE] = { [0 ... MAX_CBE-1] = CPU_MASK_NONE };
-static cpumask_t cbe_first_online_cpu = CPU_MASK_NONE;
+static cpumask_t cbe_local_mask[MAX_CBE] = { [0 ... MAX_CBE-1] = {CPU_BITS_NONE} };
+static cpumask_t cbe_first_online_cpu = { CPU_BITS_NONE };
 
 static struct cbe_regs_map *cbe_find_map(struct device_node *np)
 {
@@ -159,7 +159,8 @@ EXPORT_SYMBOL_GPL(cbe_cpu_to_node);
 
 u32 cbe_node_to_cpu(int node)
 {
-	return find_first_bit( (unsigned long *) &cbe_local_mask[node], sizeof(cpumask_t));
+	return cpumask_first(&cbe_local_mask[node]);
+
 }
 EXPORT_SYMBOL_GPL(cbe_node_to_cpu);
 
@@ -268,9 +269,9 @@ void __init cbe_regs_init(void)
 				thread->regs = map;
 				thread->cbe_id = cbe_id;
 				map->be_node = thread->be_node;
-				cpu_set(i, cbe_local_mask[cbe_id]);
+				cpumask_set_cpu(i, &cbe_local_mask[cbe_id]);
 				if(thread->thread_id == 0)
-					cpu_set(i, cbe_first_online_cpu);
+					cpumask_set_cpu(i, &cbe_first_online_cpu);
 			}
 		}
 
diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c
index 404d1fc04d5..5822141aa63 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.c
+++ b/arch/powerpc/platforms/cell/celleb_pci.c
@@ -41,7 +41,6 @@
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
 
-#include "io-workarounds.h"
 #include "celleb_pci.h"
 
 #define MAX_PCI_DEVICES    32
@@ -320,7 +319,7 @@ static int __init celleb_setup_fake_pci_device(struct device_node *node,
 
 	size = 256;
 	config = &private->fake_config[devno][fn];
-	*config = alloc_maybe_bootmem(size, GFP_KERNEL);
+	*config = zalloc_maybe_bootmem(size, GFP_KERNEL);
 	if (*config == NULL) {
 		printk(KERN_ERR "PCI: "
 		       "not enough memory for fake configuration space\n");
@@ -331,7 +330,7 @@ static int __init celleb_setup_fake_pci_device(struct device_node *node,
 
 	size = sizeof(struct celleb_pci_resource);
 	res = &private->res[devno][fn];
-	*res = alloc_maybe_bootmem(size, GFP_KERNEL);
+	*res = zalloc_maybe_bootmem(size, GFP_KERNEL);
 	if (*res == NULL) {
 		printk(KERN_ERR
 		       "PCI: not enough memory for resource data space\n");
@@ -432,7 +431,7 @@ static int __init phb_set_bus_ranges(struct device_node *dev,
 static void __init celleb_alloc_private_mem(struct pci_controller *hose)
 {
 	hose->private_data =
-		alloc_maybe_bootmem(sizeof(struct celleb_pci_private),
+		zalloc_maybe_bootmem(sizeof(struct celleb_pci_private),
 			GFP_KERNEL);
 }
 
@@ -469,18 +468,6 @@ static struct of_device_id celleb_phb_match[] __initdata = {
 	},
 };
 
-static int __init celleb_io_workaround_init(struct pci_controller *phb,
-					    struct celleb_phb_spec *phb_spec)
-{
-	if (phb_spec->ops) {
-		iowa_register_bus(phb, phb_spec->ops, phb_spec->iowa_init,
-				  phb_spec->iowa_data);
-		io_workaround_init();
-	}
-
-	return 0;
-}
-
 int __init celleb_setup_phb(struct pci_controller *phb)
 {
 	struct device_node *dev = phb->dn;
@@ -500,7 +487,11 @@ int __init celleb_setup_phb(struct pci_controller *phb)
 	if (rc)
 		return 1;
 
-	return celleb_io_workaround_init(phb, phb_spec);
+	if (phb_spec->ops)
+		iowa_register_bus(phb, phb_spec->ops,
+				  phb_spec->iowa_init,
+				  phb_spec->iowa_data);
+	return 0;
 }
 
 int celleb_pci_probe_mode(struct pci_bus *bus)
diff --git a/arch/powerpc/platforms/cell/celleb_pci.h b/arch/powerpc/platforms/cell/celleb_pci.h
index 4cba1523ec5..a801fcc5f38 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.h
+++ b/arch/powerpc/platforms/cell/celleb_pci.h
@@ -26,8 +26,9 @@
 #include <asm/pci-bridge.h>
 #include <asm/prom.h>
 #include <asm/ppc-pci.h>
+#include <asm/io-workarounds.h>
 
-#include "io-workarounds.h"
+struct iowa_bus;
 
 struct celleb_phb_spec {
 	int (*setup)(struct device_node *, struct pci_controller *);
diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index e5384557977..d58d9bae4b9 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -128,10 +128,6 @@ static void __init celleb_setup_arch_beat(void)
 	spu_management_ops	= &spu_management_of_ops;
 #endif
 
-#ifdef CONFIG_SMP
-	smp_init_celleb();
-#endif
-
 	celleb_setup_arch_common();
 }
 
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index a19bec07870..449c08c1586 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -196,8 +196,20 @@ static irqreturn_t iic_ipi_action(int irq, void *dev_id)
 {
 	int ipi = (int)(long)dev_id;
 
-	smp_message_recv(ipi);
-
+	switch(ipi) {
+	case PPC_MSG_CALL_FUNCTION:
+		generic_smp_call_function_interrupt();
+		break;
+	case PPC_MSG_RESCHEDULE:
+		scheduler_ipi();
+		break;
+	case PPC_MSG_CALL_FUNC_SINGLE:
+		generic_smp_call_function_single_interrupt();
+		break;
+	case PPC_MSG_DEBUGGER_BREAK:
+		debug_ipi_action(0, NULL);
+		break;
+	}
 	return IRQ_HANDLED;
 }
 static void iic_request_ipi(int ipi, const char *name)
@@ -244,7 +256,7 @@ static int iic_host_map(struct irq_host *h, unsigned int virq,
 		break;
 	case IIC_IRQ_TYPE_IOEXC:
 		irq_set_chip_and_handler(virq, &iic_ioexc_chip,
-					 handle_iic_irq);
+					 handle_edge_eoi_irq);
 		break;
 	default:
 		irq_set_chip_and_handler(virq, &iic_chip, handle_edge_eoi_irq);
diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c
index d31c594cfdf..51e290126bc 100644
--- a/arch/powerpc/platforms/cell/qpace_setup.c
+++ b/arch/powerpc/platforms/cell/qpace_setup.c
@@ -42,7 +42,6 @@
 #include "interrupt.h"
 #include "pervasive.h"
 #include "ras.h"
-#include "io-workarounds.h"
 
 static void qpace_show_cpuinfo(struct seq_file *m)
 {
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index fd57bfe00ed..c73cf4c43fc 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -51,11 +51,11 @@
 #include <asm/udbg.h>
 #include <asm/mpic.h>
 #include <asm/cell-regs.h>
+#include <asm/io-workarounds.h>
 
 #include "interrupt.h"
 #include "pervasive.h"
 #include "ras.h"
-#include "io-workarounds.h"
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -136,8 +136,6 @@ static int __devinit cell_setup_phb(struct pci_controller *phb)
 
 	iowa_register_bus(phb, &spiderpci_ops, &spiderpci_iowa_init,
 				  (void *)SPIDER_PCI_REG_BASE);
-	io_workaround_init();
-
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index f774530075b..d176e6148e3 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -77,7 +77,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 	unsigned int pcpu;
 	int start_cpu;
 
-	if (cpu_isset(lcpu, of_spin_map))
+	if (cpumask_test_cpu(lcpu, &of_spin_map))
 		/* Already started by OF and sitting in spin loop */
 		return 1;
 
@@ -103,27 +103,11 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 	return 1;
 }
 
-static void smp_iic_message_pass(int target, int msg)
-{
-	unsigned int i;
-
-	if (target < NR_CPUS) {
-		iic_cause_IPI(target, msg);
-	} else {
-		for_each_online_cpu(i) {
-			if (target == MSG_ALL_BUT_SELF
-			    && i == smp_processor_id())
-				continue;
-			iic_cause_IPI(i, msg);
-		}
-	}
-}
-
 static int __init smp_iic_probe(void)
 {
 	iic_request_IPIs();
 
-	return cpus_weight(cpu_possible_map);
+	return cpumask_weight(cpu_possible_mask);
 }
 
 static void __devinit smp_cell_setup_cpu(int cpu)
@@ -137,12 +121,12 @@ static void __devinit smp_cell_setup_cpu(int cpu)
 	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
 }
 
-static void __devinit smp_cell_kick_cpu(int nr)
+static int __devinit smp_cell_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
 
 	if (!smp_startup_cpu(nr))
-		return;
+		return -ENOENT;
 
 	/*
 	 * The processor is currently spinning, waiting for the
@@ -150,6 +134,8 @@ static void __devinit smp_cell_kick_cpu(int nr)
 	 * the processor will continue on to secondary_start
 	 */
 	paca[nr].cpu_start = 1;
+
+	return 0;
 }
 
 static int smp_cell_cpu_bootable(unsigned int nr)
@@ -166,7 +152,7 @@ static int smp_cell_cpu_bootable(unsigned int nr)
 	return 1;
 }
 static struct smp_ops_t bpa_iic_smp_ops = {
-	.message_pass	= smp_iic_message_pass,
+	.message_pass	= iic_cause_IPI,
 	.probe		= smp_iic_probe,
 	.kick_cpu	= smp_cell_kick_cpu,
 	.setup_cpu	= smp_cell_setup_cpu,
@@ -186,13 +172,12 @@ void __init smp_init_cell(void)
 	if (cpu_has_feature(CPU_FTR_SMT)) {
 		for_each_present_cpu(i) {
 			if (cpu_thread_in_core(i) == 0)
-				cpu_set(i, of_spin_map);
+				cpumask_set_cpu(i, &of_spin_map);
 		}
-	} else {
-		of_spin_map = cpu_present_map;
-	}
+	} else
+		cpumask_copy(&of_spin_map, cpu_present_mask);
 
-	cpu_clear(boot_cpuid, of_spin_map);
+	cpumask_clear_cpu(boot_cpuid, &of_spin_map);
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index ca7731c0b59..f1f7878893f 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -27,8 +27,7 @@
 
 #include <asm/ppc-pci.h>
 #include <asm/pci-bridge.h>
-
-#include "io-workarounds.h"
+#include <asm/io-workarounds.h>
 
 #define SPIDER_PCI_DISABLE_PREFETCH
 
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index c5cf50e6b45..442c28c00f8 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -68,9 +68,9 @@ struct spider_pic {
 };
 static struct spider_pic spider_pics[SPIDER_CHIP_COUNT];
 
-static struct spider_pic *spider_virq_to_pic(unsigned int virq)
+static struct spider_pic *spider_irq_data_to_pic(struct irq_data *d)
 {
-	return irq_map[virq].host->host_data;
+	return irq_data_get_irq_chip_data(d);
 }
 
 static void __iomem *spider_get_irq_config(struct spider_pic *pic,
@@ -81,24 +81,24 @@ static void __iomem *spider_get_irq_config(struct spider_pic *pic,
 
 static void spider_unmask_irq(struct irq_data *d)
 {
-	struct spider_pic *pic = spider_virq_to_pic(d->irq);
-	void __iomem *cfg = spider_get_irq_config(pic, irq_map[d->irq].hwirq);
+	struct spider_pic *pic = spider_irq_data_to_pic(d);
+	void __iomem *cfg = spider_get_irq_config(pic, irqd_to_hwirq(d));
 
 	out_be32(cfg, in_be32(cfg) | 0x30000000u);
 }
 
 static void spider_mask_irq(struct irq_data *d)
 {
-	struct spider_pic *pic = spider_virq_to_pic(d->irq);
-	void __iomem *cfg = spider_get_irq_config(pic, irq_map[d->irq].hwirq);
+	struct spider_pic *pic = spider_irq_data_to_pic(d);
+	void __iomem *cfg = spider_get_irq_config(pic, irqd_to_hwirq(d));
 
 	out_be32(cfg, in_be32(cfg) & ~0x30000000u);
 }
 
 static void spider_ack_irq(struct irq_data *d)
 {
-	struct spider_pic *pic = spider_virq_to_pic(d->irq);
-	unsigned int src = irq_map[d->irq].hwirq;
+	struct spider_pic *pic = spider_irq_data_to_pic(d);
+	unsigned int src = irqd_to_hwirq(d);
 
 	/* Reset edge detection logic if necessary
 	 */
@@ -116,8 +116,8 @@ static void spider_ack_irq(struct irq_data *d)
 static int spider_set_irq_type(struct irq_data *d, unsigned int type)
 {
 	unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
-	struct spider_pic *pic = spider_virq_to_pic(d->irq);
-	unsigned int hw = irq_map[d->irq].hwirq;
+	struct spider_pic *pic = spider_irq_data_to_pic(d);
+	unsigned int hw = irqd_to_hwirq(d);
 	void __iomem *cfg = spider_get_irq_config(pic, hw);
 	u32 old_mask;
 	u32 ic;
@@ -171,6 +171,7 @@ static struct irq_chip spider_pic = {
 static int spider_host_map(struct irq_host *h, unsigned int virq,
 			irq_hw_number_t hw)
 {
+	irq_set_chip_data(virq, h->host_data);
 	irq_set_chip_and_handler(virq, &spider_pic, handle_level_irq);
 
 	/* Set default irq type */
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index acfaccea5f4..3675da73623 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -32,6 +32,7 @@
 #include <linux/io.h>
 #include <linux/mutex.h>
 #include <linux/linux_logo.h>
+#include <linux/syscore_ops.h>
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
 #include <asm/spu_csa.h>
@@ -521,18 +522,8 @@ void spu_init_channels(struct spu *spu)
 }
 EXPORT_SYMBOL_GPL(spu_init_channels);
 
-static int spu_shutdown(struct sys_device *sysdev)
-{
-	struct spu *spu = container_of(sysdev, struct spu, sysdev);
-
-	spu_free_irqs(spu);
-	spu_destroy_spu(spu);
-	return 0;
-}
-
 static struct sysdev_class spu_sysdev_class = {
 	.name = "spu",
-	.shutdown = spu_shutdown,
 };
 
 int spu_add_sysdev_attr(struct sysdev_attribute *attr)
@@ -797,6 +788,22 @@ static inline void crash_register_spus(struct list_head *list)
 }
 #endif
 
+static void spu_shutdown(void)
+{
+	struct spu *spu;
+
+	mutex_lock(&spu_full_list_mutex);
+	list_for_each_entry(spu, &spu_full_list, full_list) {
+		spu_free_irqs(spu);
+		spu_destroy_spu(spu);
+	}
+	mutex_unlock(&spu_full_list_mutex);
+}
+
+static struct syscore_ops spu_syscore_ops = {
+	.shutdown = spu_shutdown,
+};
+
 static int __init init_spu_base(void)
 {
 	int i, ret = 0;
@@ -830,6 +837,7 @@ static int __init init_spu_base(void)
 	crash_register_spus(&spu_full_list);
 	mutex_unlock(&spu_full_list_mutex);
 	spu_add_sysdev_attr(&attr_stat);
+	register_syscore_ops(&spu_syscore_ops);
 
 	spu_init_affinity();
 
diff --git a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
index 3b894f58528..147069938cf 100644
--- a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
+++ b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
@@ -90,7 +90,7 @@ int spu_alloc_lscsa(struct spu_state *csa)
 	 */
 	for (i = 0; i < SPU_LSCSA_NUM_BIG_PAGES; i++) {
 		/* XXX This is likely to fail, we should use a special pool
-		 *     similiar to what hugetlbfs does.
+		 *     similar to what hugetlbfs does.
 		 */
 		csa->lscsa_pages[i] = alloc_pages(GFP_KERNEL,
 						  SPU_64K_PAGE_ORDER);
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 0b046628493..32cb4e66d2c 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -141,7 +141,7 @@ void __spu_update_sched_info(struct spu_context *ctx)
 	 * runqueue. The context will be rescheduled on the proper node
 	 * if it is timesliced or preempted.
 	 */
-	ctx->cpus_allowed = current->cpus_allowed;
+	cpumask_copy(&ctx->cpus_allowed, tsk_cpus_allowed(current));
 
 	/* Save the current cpu id for spu interrupt routing. */
 	ctx->last_ran = raw_smp_processor_id();
@@ -846,7 +846,7 @@ static struct spu_context *grab_runnable_context(int prio, int node)
 		struct list_head *rq = &spu_prio->runq[best];
 
 		list_for_each_entry(ctx, rq, rq) {
-			/* XXX(hch): check for affinity here aswell */
+			/* XXX(hch): check for affinity here as well */
 			if (__node_allowed(ctx, node)) {
 				__spu_del_from_rq(ctx);
 				goto found;
diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore.c b/arch/powerpc/platforms/cell/spufs/spu_restore.c
index 21a9c952d88..72c905f1ee7 100644
--- a/arch/powerpc/platforms/cell/spufs/spu_restore.c
+++ b/arch/powerpc/platforms/cell/spufs/spu_restore.c
@@ -284,7 +284,7 @@ static inline void restore_complete(void)
 		exit_instrs[3] = BR_INSTR;
 		break;
 	default:
-		/* SPU_Status[R]=1. No additonal instructions. */
+		/* SPU_Status[R]=1. No additional instructions. */
 		break;
 	}
 	spu_sync();
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 02cafecc90e..a800122e4dd 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -30,10 +30,12 @@
 #include <asm/mpic.h>
 #include <asm/rtas.h>
 
-static void __devinit smp_chrp_kick_cpu(int nr)
+static int __devinit smp_chrp_kick_cpu(int nr)
 {
 	*(unsigned long *)KERNELBASE = nr;
 	asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
+
+	return 0;
 }
 
 static void __devinit smp_chrp_setup_cpu(int cpu_nr)
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
index 12aa62b6f22..f61a2dd96b9 100644
--- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -48,7 +48,7 @@
 
 static void flipper_pic_mask_and_ack(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void __iomem *io_base = irq_data_get_irq_chip_data(d);
 	u32 mask = 1 << irq;
 
@@ -59,7 +59,7 @@ static void flipper_pic_mask_and_ack(struct irq_data *d)
 
 static void flipper_pic_ack(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void __iomem *io_base = irq_data_get_irq_chip_data(d);
 
 	/* this is at least needed for RSW */
@@ -68,7 +68,7 @@ static void flipper_pic_ack(struct irq_data *d)
 
 static void flipper_pic_mask(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void __iomem *io_base = irq_data_get_irq_chip_data(d);
 
 	clrbits32(io_base + FLIPPER_IMR, 1 << irq);
@@ -76,7 +76,7 @@ static void flipper_pic_mask(struct irq_data *d)
 
 static void flipper_pic_unmask(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void __iomem *io_base = irq_data_get_irq_chip_data(d);
 
 	setbits32(io_base + FLIPPER_IMR, 1 << irq);
@@ -107,12 +107,6 @@ static int flipper_pic_map(struct irq_host *h, unsigned int virq,
 	return 0;
 }
 
-static void flipper_pic_unmap(struct irq_host *h, unsigned int irq)
-{
-	irq_set_chip_data(irq, NULL);
-	irq_set_chip(irq, NULL);
-}
-
 static int flipper_pic_match(struct irq_host *h, struct device_node *np)
 {
 	return 1;
@@ -121,7 +115,6 @@ static int flipper_pic_match(struct irq_host *h, struct device_node *np)
 
 static struct irq_host_ops flipper_irq_host_ops = {
 	.map = flipper_pic_map,
-	.unmap = flipper_pic_unmap,
 	.match = flipper_pic_match,
 };
 
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index 2bdddfc9d52..e4919170c6b 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -43,7 +43,7 @@
 
 static void hlwd_pic_mask_and_ack(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void __iomem *io_base = irq_data_get_irq_chip_data(d);
 	u32 mask = 1 << irq;
 
@@ -53,7 +53,7 @@ static void hlwd_pic_mask_and_ack(struct irq_data *d)
 
 static void hlwd_pic_ack(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void __iomem *io_base = irq_data_get_irq_chip_data(d);
 
 	out_be32(io_base + HW_BROADWAY_ICR, 1 << irq);
@@ -61,7 +61,7 @@ static void hlwd_pic_ack(struct irq_data *d)
 
 static void hlwd_pic_mask(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void __iomem *io_base = irq_data_get_irq_chip_data(d);
 
 	clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
@@ -69,7 +69,7 @@ static void hlwd_pic_mask(struct irq_data *d)
 
 static void hlwd_pic_unmask(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void __iomem *io_base = irq_data_get_irq_chip_data(d);
 
 	setbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
@@ -100,15 +100,8 @@ static int hlwd_pic_map(struct irq_host *h, unsigned int virq,
 	return 0;
 }
 
-static void hlwd_pic_unmap(struct irq_host *h, unsigned int irq)
-{
-	irq_set_chip_data(irq, NULL);
-	irq_set_chip(irq, NULL);
-}
-
 static struct irq_host_ops hlwd_irq_host_ops = {
 	.map = hlwd_pic_map,
-	.unmap = hlwd_pic_unmap,
 };
 
 static unsigned int __hlwd_pic_get_irq(struct irq_host *h)
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index e5bc9f75d47..b57cda3a081 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -1,7 +1,9 @@
 config PPC_ISERIES
 	bool "IBM Legacy iSeries"
 	depends on PPC64 && PPC_BOOK3S
-	select PPC_INDIRECT_IO
+	select PPC_SMP_MUXED_IPI
+	select PPC_INDIRECT_PIO
+	select PPC_INDIRECT_MMIO
 	select PPC_PCI_CHOICE if EXPERT
 
 menu "iSeries device drivers"
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 32a56c6dfa7..29c02f36b32 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -31,6 +31,7 @@
 #include <asm/thread_info.h>
 #include <asm/ptrace.h>
 #include <asm/cputable.h>
+#include <asm/mmu.h>
 
 #include "exception.h"
 
@@ -60,29 +61,31 @@ system_reset_iSeries:
 /* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */
 /* In the UP case we'll yield() later, and we will not access the paca anyway */
 #ifdef CONFIG_SMP
-1:
+iSeries_secondary_wait_paca:
 	HMT_LOW
 	LOAD_REG_ADDR(r23, __secondary_hold_spinloop)
 	ld	r23,0(r23)
-	sync
-	LOAD_REG_ADDR(r3,current_set)
-	sldi	r28,r24,3		/* get current_set[cpu#] */
-	ldx	r3,r3,r28
-	addi	r1,r3,THREAD_SIZE
-	subi	r1,r1,STACK_FRAME_OVERHEAD
 
-	cmpwi	0,r23,0			/* Keep poking the Hypervisor until */
-	bne	2f			/* we're released */
-	/* Let the Hypervisor know we are alive */
+	cmpdi	0,r23,0
+	bne	2f			/* go on when the master is ready */
+
+	/* Keep poking the Hypervisor until we're released */
 	/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
 	lis	r3,0x8002
 	rldicr	r3,r3,32,15		/* r0 = (r3 << 32) & 0xffff000000000000 */
 	li	r0,-1			/* r0=-1 indicates a Hypervisor call */
 	sc				/* Invoke the hypervisor via a system call */
-	b	1b
-#endif
+	b	iSeries_secondary_wait_paca
 
 2:
+	HMT_MEDIUM
+	sync
+
+	LOAD_REG_ADDR(r3, nr_cpu_ids)	/* get number of pacas allocated */
+	lwz	r3,0(r3)		/* nr_cpus= or NR_CPUS can limit */
+	cmpld	0,r24,r3		/* is our cpu number allocated? */
+	bge	iSeries_secondary_yield	/* no, yield forever */
+
 	/* Load our paca now that it's been allocated */
 	LOAD_REG_ADDR(r13, paca)
 	ld	r13,0(r13)
@@ -93,10 +96,24 @@ system_reset_iSeries:
 	ori	r23,r23,MSR_RI
 	mtmsrd	r23			/* RI on */
 
-	HMT_LOW
-#ifdef CONFIG_SMP
+iSeries_secondary_smp_loop:
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor
 					 * should start */
+	cmpwi	0,r23,0
+	bne	3f			/* go on when we are told */
+
+	HMT_LOW
+	/* Let the Hypervisor know we are alive */
+	/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
+	lis	r3,0x8002
+	rldicr	r3,r3,32,15		/* r0 = (r3 << 32) & 0xffff000000000000 */
+	li	r0,-1			/* r0=-1 indicates a Hypervisor call */
+	sc				/* Invoke the hypervisor via a system call */
+	mfspr	r13,SPRN_SPRG_PACA	/* Put r13 back ???? */
+	b	iSeries_secondary_smp_loop /* wait for signal to start */
+
+3:
+	HMT_MEDIUM
 	sync
 	LOAD_REG_ADDR(r3,current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#] */
@@ -104,27 +121,22 @@ system_reset_iSeries:
 	addi	r1,r3,THREAD_SIZE
 	subi	r1,r1,STACK_FRAME_OVERHEAD
 
-	cmpwi	0,r23,0
-	beq	iSeries_secondary_smp_loop	/* Loop until told to go */
 	b	__secondary_start		/* Loop until told to go */
-iSeries_secondary_smp_loop:
-	/* Let the Hypervisor know we are alive */
-	/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
-	lis	r3,0x8002
-	rldicr	r3,r3,32,15		/* r0 = (r3 << 32) & 0xffff000000000000 */
-#else /* CONFIG_SMP */
+#endif /* CONFIG_SMP */
+
+iSeries_secondary_yield:
 	/* Yield the processor.  This is required for non-SMP kernels
 		which are running on multi-threaded machines. */
+	HMT_LOW
 	lis	r3,0x8000
 	rldicr	r3,r3,32,15		/* r3 = (r3 << 32) & 0xffff000000000000 */
 	addi	r3,r3,18		/* r3 = 0x8000000000000012 which is "yield" */
 	li	r4,0			/* "yield timed" */
 	li	r5,-1			/* "yield forever" */
-#endif /* CONFIG_SMP */
 	li	r0,-1			/* r0=-1 indicates a Hypervisor call */
 	sc				/* Invoke the hypervisor via a system call */
 	mfspr	r13,SPRN_SPRG_PACA	/* Put r13 back ???? */
-	b	2b			/* If SMP not configured, secondaries
+	b	iSeries_secondary_yield	/* If SMP not configured, secondaries
 					 * loop forever */
 
 /***  ISeries-LPAR interrupt handlers ***/
@@ -157,7 +169,7 @@ BEGIN_FTR_SECTION
 FTR_SECTION_ELSE
 	EXCEPTION_PROLOG_1(PACA_EXGEN)
 	EXCEPTION_PROLOG_ISERIES_1
-ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_SLB)
 	b	data_access_common
 
 .do_stab_bolted_iSeries:
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index 52a6889832c..b2103453eb0 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -42,7 +42,6 @@
 #include "irq.h"
 #include "pci.h"
 #include "call_pci.h"
-#include "smp.h"
 
 #ifdef CONFIG_PCI
 
@@ -171,7 +170,7 @@ static void iseries_enable_IRQ(struct irq_data *d)
 {
 	u32 bus, dev_id, function, mask;
 	const u32 sub_bus = 0;
-	unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
 
 	/* The IRQ has already been locked by the caller */
 	bus = REAL_IRQ_TO_BUS(rirq);
@@ -188,7 +187,7 @@ static unsigned int iseries_startup_IRQ(struct irq_data *d)
 {
 	u32 bus, dev_id, function, mask;
 	const u32 sub_bus = 0;
-	unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
 
 	bus = REAL_IRQ_TO_BUS(rirq);
 	function = REAL_IRQ_TO_FUNC(rirq);
@@ -234,7 +233,7 @@ static void iseries_shutdown_IRQ(struct irq_data *d)
 {
 	u32 bus, dev_id, function, mask;
 	const u32 sub_bus = 0;
-	unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
 
 	/* irq should be locked by the caller */
 	bus = REAL_IRQ_TO_BUS(rirq);
@@ -257,7 +256,7 @@ static void iseries_disable_IRQ(struct irq_data *d)
 {
 	u32 bus, dev_id, function, mask;
 	const u32 sub_bus = 0;
-	unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
 
 	/* The IRQ has already been locked by the caller */
 	bus = REAL_IRQ_TO_BUS(rirq);
@@ -271,7 +270,7 @@ static void iseries_disable_IRQ(struct irq_data *d)
 
 static void iseries_end_IRQ(struct irq_data *d)
 {
-	unsigned int rirq = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int rirq = (unsigned int)irqd_to_hwirq(d);
 
 	HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq),
 		(REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq));
@@ -316,7 +315,7 @@ unsigned int iSeries_get_irq(void)
 #ifdef CONFIG_SMP
 	if (get_lppaca()->int_dword.fields.ipi_cnt) {
 		get_lppaca()->int_dword.fields.ipi_cnt = 0;
-		iSeries_smp_message_recv();
+		smp_ipi_demux();
 	}
 #endif /* CONFIG_SMP */
 	if (hvlpevent_is_pending())
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index b5e026bdca2..62dabe3c2bf 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -51,7 +51,7 @@
 static int mf_initialized;
 
 /*
- * This is the structure layout for the Machine Facilites LPAR event
+ * This is the structure layout for the Machine Facilities LPAR event
  * flows.
  */
 struct vsp_cmd_data {
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 2946ae10fbf..c25a0815c26 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -249,7 +249,7 @@ static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array,
 	unsigned long i;
 	unsigned long mem_blocks = 0;
 
-	if (cpu_has_feature(CPU_FTR_SLB))
+	if (mmu_has_feature(MMU_FTR_SLB))
 		mem_blocks = iSeries_process_Regatta_mainstore_vpd(mb_array,
 				max_entries);
 	else
@@ -634,7 +634,7 @@ static int __init iseries_probe(void)
 
 	hpte_init_iSeries();
 	/* iSeries does not support 16M pages */
-	cur_cpu_spec->cpu_features &= ~CPU_FTR_16M_PAGE;
+	cur_cpu_spec->mmu_features &= ~MMU_FTR_16M_PAGE;
 
 	return 1;
 }
@@ -685,6 +685,11 @@ void * __init iSeries_early_setup(void)
 	powerpc_firmware_features |= FW_FEATURE_ISERIES;
 	powerpc_firmware_features |= FW_FEATURE_LPAR;
 
+#ifdef CONFIG_SMP
+	/* On iSeries we know we can never have more than 64 cpus */
+	nr_cpu_ids = max(nr_cpu_ids, 64);
+#endif
+
 	iSeries_fixup_klimit();
 
 	/*
diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c
index 6c6029914db..e3265adde5d 100644
--- a/arch/powerpc/platforms/iseries/smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -42,57 +42,23 @@
 #include <asm/cputable.h>
 #include <asm/system.h>
 
-#include "smp.h"
-
-static unsigned long iSeries_smp_message[NR_CPUS];
-
-void iSeries_smp_message_recv(void)
-{
-	int cpu = smp_processor_id();
-	int msg;
-
-	if (num_online_cpus() < 2)
-		return;
-
-	for (msg = 0; msg < 4; msg++)
-		if (test_and_clear_bit(msg, &iSeries_smp_message[cpu]))
-			smp_message_recv(msg);
-}
-
-static inline void smp_iSeries_do_message(int cpu, int msg)
+static void smp_iSeries_cause_ipi(int cpu, unsigned long data)
 {
-	set_bit(msg, &iSeries_smp_message[cpu]);
 	HvCall_sendIPI(&(paca[cpu]));
 }
 
-static void smp_iSeries_message_pass(int target, int msg)
-{
-	int i;
-
-	if (target < NR_CPUS)
-		smp_iSeries_do_message(target, msg);
-	else {
-		for_each_online_cpu(i) {
-			if ((target == MSG_ALL_BUT_SELF) &&
-					(i == smp_processor_id()))
-				continue;
-			smp_iSeries_do_message(i, msg);
-		}
-	}
-}
-
 static int smp_iSeries_probe(void)
 {
 	return cpumask_weight(cpu_possible_mask);
 }
 
-static void smp_iSeries_kick_cpu(int nr)
+static int smp_iSeries_kick_cpu(int nr)
 {
 	BUG_ON((nr < 0) || (nr >= NR_CPUS));
 
 	/* Verify that our partition has a processor nr */
 	if (lppaca_of(nr).dyn_proc_status >= 2)
-		return;
+		return -ENOENT;
 
 	/* The processor is currently spinning, waiting
 	 * for the cpu_start field to become non-zero
@@ -100,6 +66,8 @@ static void smp_iSeries_kick_cpu(int nr)
 	 * continue on to secondary_start in iSeries_head.S
 	 */
 	paca[nr].cpu_start = 1;
+
+	return 0;
 }
 
 static void __devinit smp_iSeries_setup_cpu(int nr)
@@ -107,7 +75,8 @@ static void __devinit smp_iSeries_setup_cpu(int nr)
 }
 
 static struct smp_ops_t iSeries_smp_ops = {
-	.message_pass = smp_iSeries_message_pass,
+	.message_pass = smp_muxed_ipi_message_pass,
+	.cause_ipi    = smp_iSeries_cause_ipi,
 	.probe        = smp_iSeries_probe,
 	.kick_cpu     = smp_iSeries_kick_cpu,
 	.setup_cpu    = smp_iSeries_setup_cpu,
diff --git a/arch/powerpc/platforms/iseries/smp.h b/arch/powerpc/platforms/iseries/smp.h
deleted file mode 100644
index d501f7de01e..00000000000
--- a/arch/powerpc/platforms/iseries/smp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _PLATFORMS_ISERIES_SMP_H
-#define _PLATFORMS_ISERIES_SMP_H
-
-extern void iSeries_smp_message_recv(void);
-
-#endif	/* _PLATFORMS_ISERIES_SMP_H */
diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c
index b5f05d943a9..2376069cdc1 100644
--- a/arch/powerpc/platforms/iseries/viopath.c
+++ b/arch/powerpc/platforms/iseries/viopath.c
@@ -396,7 +396,7 @@ static void vio_handleEvent(struct HvLpEvent *event)
 			viopathStatus[remoteLp].mTargetInst)) {
 			printk(VIOPATH_KERN_WARN
 			       "message from invalid partition. "
-			       "int msg rcvd, source inst (%d) doesnt match (%d)\n",
+			       "int msg rcvd, source inst (%d) doesn't match (%d)\n",
 			       viopathStatus[remoteLp].mTargetInst,
 			       event->xSourceInstanceId);
 			return;
@@ -407,7 +407,7 @@ static void vio_handleEvent(struct HvLpEvent *event)
 			viopathStatus[remoteLp].mSourceInst)) {
 			printk(VIOPATH_KERN_WARN
 			       "message from invalid partition. "
-			       "int msg rcvd, target inst (%d) doesnt match (%d)\n",
+			       "int msg rcvd, target inst (%d) doesn't match (%d)\n",
 			       viopathStatus[remoteLp].mSourceInst,
 			       event->xTargetInstanceId);
 			return;
@@ -418,7 +418,7 @@ static void vio_handleEvent(struct HvLpEvent *event)
 		    viopathStatus[remoteLp].mSourceInst) {
 			printk(VIOPATH_KERN_WARN
 			       "message from invalid partition. "
-			       "ack msg rcvd, source inst (%d) doesnt match (%d)\n",
+			       "ack msg rcvd, source inst (%d) doesn't match (%d)\n",
 			       viopathStatus[remoteLp].mSourceInst,
 			       event->xSourceInstanceId);
 			return;
@@ -428,7 +428,7 @@ static void vio_handleEvent(struct HvLpEvent *event)
 		    viopathStatus[remoteLp].mTargetInst) {
 			printk(VIOPATH_KERN_WARN
 			       "message from invalid partition. "
-			       "viopath: ack msg rcvd, target inst (%d) doesnt match (%d)\n",
+			       "viopath: ack msg rcvd, target inst (%d) doesn't match (%d)\n",
 			       viopathStatus[remoteLp].mTargetInst,
 			       event->xTargetInstanceId);
 			return;
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index 09695ae50f9..321a9b3a2d0 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -379,9 +379,9 @@ void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
 }
 EXPORT_SYMBOL(pasemi_dma_free_buf);
 
-/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization
+/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel synchronization
  *
- * Allocates a flag for use with channel syncronization (event descriptors).
+ * Allocates a flag for use with channel synchronization (event descriptors).
  * Returns allocated flag (0-63), < 0 on error.
  */
 int pasemi_dma_alloc_flag(void)
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index 1e1a0873e1d..1afd10f6785 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -18,4 +18,13 @@ config PPC_PMAC64
 	select PPC_970_NAP
 	default y
 
-
+config PPC_PMAC32_PSURGE
+	bool "Support for powersurge upgrade cards" if EXPERT
+	depends on SMP && PPC32 && PPC_PMAC
+	select PPC_SMP_MUXED_IPI
+	default y
+	help
+	  The powersurge cpu boards can be used in the generation
+	  of powermacs that have a socket for an upgradeable cpu card,
+	  including the 7500, 8500, 9500, 9600.  Support exists for
+	  both dual and quad socket upgrade cards.
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 50f16939255..ea47df66fee 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -11,7 +11,7 @@ obj-y				+= pic.o setup.o time.o feature.o pci.o \
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
 obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq_32.o
 obj-$(CONFIG_CPU_FREQ_PMAC64)	+= cpufreq_64.o
-# CONFIG_NVRAM is an arch. independant tristate symbol, for pmac32 we really
+# CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really
 # need this to be a bool.  Cheat here and pretend CONFIG_NVRAM=m is really
 # CONFIG_NVRAM=y
 obj-$(CONFIG_NVRAM:m=y)		+= nvram.o
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 480567e5fa9..e9c8a607268 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -904,7 +904,7 @@ static void __init smu_i2c_probe(void)
 	printk(KERN_INFO "SMU i2c %s\n", controller->full_name);
 
 	/* Look for childs, note that they might not be of the right
-	 * type as older device trees mix i2c busses and other thigns
+	 * type as older device trees mix i2c busses and other things
 	 * at the same level
 	 */
 	for (busnode = NULL;
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index ab689894270..f33e08d573c 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -299,7 +299,7 @@ static void __init setup_chaos(struct pci_controller *hose,
  * This function deals with some "special cases" devices.
  *
  *  0 -> No special case
- *  1 -> Skip the device but act as if the access was successfull
+ *  1 -> Skip the device but act as if the access was successful
  *       (return 0xff's on reads, eventually, cache config space
  *       accesses in a later version)
  * -1 -> Hide the device (unsuccessful access)
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 023f24086a0..9089b042119 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -21,7 +21,7 @@
 #include <linux/signal.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #include <linux/module.h>
@@ -84,7 +84,7 @@ static void __pmac_retrigger(unsigned int irq_nr)
 
 static void pmac_mask_and_ack_irq(struct irq_data *d)
 {
-	unsigned int src = irq_map[d->irq].hwirq;
+	unsigned int src = irqd_to_hwirq(d);
         unsigned long bit = 1UL << (src & 0x1f);
         int i = src >> 5;
         unsigned long flags;
@@ -106,7 +106,7 @@ static void pmac_mask_and_ack_irq(struct irq_data *d)
 
 static void pmac_ack_irq(struct irq_data *d)
 {
-	unsigned int src = irq_map[d->irq].hwirq;
+	unsigned int src = irqd_to_hwirq(d);
         unsigned long bit = 1UL << (src & 0x1f);
         int i = src >> 5;
         unsigned long flags;
@@ -152,7 +152,7 @@ static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
 static unsigned int pmac_startup_irq(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int src = irq_map[d->irq].hwirq;
+	unsigned int src = irqd_to_hwirq(d);
         unsigned long bit = 1UL << (src & 0x1f);
         int i = src >> 5;
 
@@ -169,7 +169,7 @@ static unsigned int pmac_startup_irq(struct irq_data *d)
 static void pmac_mask_irq(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int src = irq_map[d->irq].hwirq;
+	unsigned int src = irqd_to_hwirq(d);
 
 	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
         __clear_bit(src, ppc_cached_irq_mask);
@@ -180,7 +180,7 @@ static void pmac_mask_irq(struct irq_data *d)
 static void pmac_unmask_irq(struct irq_data *d)
 {
 	unsigned long flags;
-	unsigned int src = irq_map[d->irq].hwirq;
+	unsigned int src = irqd_to_hwirq(d);
 
 	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	__set_bit(src, ppc_cached_irq_mask);
@@ -193,7 +193,7 @@ static int pmac_retrigger(struct irq_data *d)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
-	__pmac_retrigger(irq_map[d->irq].hwirq);
+	__pmac_retrigger(irqd_to_hwirq(d));
 	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	return 1;
 }
@@ -239,15 +239,12 @@ static unsigned int pmac_pic_get_irq(void)
 	unsigned long bits = 0;
 	unsigned long flags;
 
-#ifdef CONFIG_SMP
-	void psurge_smp_message_recv(void);
-
-       	/* IPI's are a hack on the powersurge -- Cort */
-       	if ( smp_processor_id() != 0 ) {
-		psurge_smp_message_recv();
-		return NO_IRQ_IGNORE;	/* ignore, already handled */
+#ifdef CONFIG_PPC_PMAC32_PSURGE
+	/* IPI's are a hack on the powersurge -- Cort */
+	if (smp_processor_id() != 0) {
+		return  psurge_secondary_virq;
         }
-#endif /* CONFIG_SMP */
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
 	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
 		int i = irq >> 5;
@@ -677,7 +674,7 @@ not_found:
 	return viaint;
 }
 
-static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
+static int pmacpic_suspend(void)
 {
 	int viaint = pmacpic_find_viaint();
 
@@ -698,7 +695,7 @@ static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
         return 0;
 }
 
-static int pmacpic_resume(struct sys_device *sysdev)
+static void pmacpic_resume(void)
 {
 	int i;
 
@@ -709,39 +706,19 @@ static int pmacpic_resume(struct sys_device *sysdev)
 	for (i = 0; i < max_real_irqs; ++i)
 		if (test_bit(i, sleep_save_mask))
 			pmac_unmask_irq(irq_get_irq_data(i));
-
-	return 0;
 }
 
-#endif /* CONFIG_PM && CONFIG_PPC32 */
-
-static struct sysdev_class pmacpic_sysclass = {
-	.name = "pmac_pic",
-};
-
-static struct sys_device device_pmacpic = {
-	.id		= 0,
-	.cls		= &pmacpic_sysclass,
-};
-
-static struct sysdev_driver driver_pmacpic = {
-#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
-	.suspend	= &pmacpic_suspend,
-	.resume		= &pmacpic_resume,
-#endif /* CONFIG_PM && CONFIG_PPC32 */
+static struct syscore_ops pmacpic_syscore_ops = {
+	.suspend	= pmacpic_suspend,
+	.resume		= pmacpic_resume,
 };
 
-static int __init init_pmacpic_sysfs(void)
+static int __init init_pmacpic_syscore(void)
 {
-#ifdef CONFIG_PPC32
-	if (max_irqs == 0)
-		return -ENODEV;
-#endif
-	printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
-	sysdev_class_register(&pmacpic_sysclass);
-	sysdev_register(&device_pmacpic);
-	sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
+	register_syscore_ops(&pmacpic_syscore_ops);
 	return 0;
 }
-machine_subsys_initcall(powermac, init_pmacpic_sysfs);
 
+machine_subsys_initcall(powermac, init_pmacpic_syscore);
+
+#endif /* CONFIG_PM && CONFIG_PPC32 */
diff --git a/arch/powerpc/platforms/powermac/pic.h b/arch/powerpc/platforms/powermac/pic.h
deleted file mode 100644
index d622a8345aa..00000000000
--- a/arch/powerpc/platforms/powermac/pic.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __PPC_PLATFORMS_PMAC_PIC_H
-#define __PPC_PLATFORMS_PMAC_PIC_H
-
-#include <linux/irq.h>
-
-extern struct irq_chip pmac_pic;
-
-extern void pmac_pic_init(void);
-extern int pmac_get_irq(void);
-
-#endif /* __PPC_PLATFORMS_PMAC_PIC_H */
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index f0bc08f6c1f..8327cce2bdb 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -33,7 +33,7 @@ extern void pmac_setup_pci_dma(void);
 extern void pmac_check_ht_link(void);
 
 extern void pmac_setup_smp(void);
-extern void pmac32_cpu_die(void);
+extern int psurge_secondary_virq;
 extern void low_cpu_die(void) __attribute__((noreturn));
 
 extern int pmac_nvram_init(void);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index d5aceb7fb12..aa45281bd29 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -650,51 +650,6 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
 		return PCI_PROBE_NORMAL;
 	return PCI_PROBE_DEVTREE;
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
-/* access per cpu vars from generic smp.c */
-DECLARE_PER_CPU(int, cpu_state);
-
-static void pmac64_cpu_die(void)
-{
-	/*
-	 * turn off as much as possible, we'll be
-	 * kicked out as this will only be invoked
-	 * on core99 platforms for now ...
-	 */
-
-	printk(KERN_INFO "CPU#%d offline\n", smp_processor_id());
-	__get_cpu_var(cpu_state) = CPU_DEAD;
-	smp_wmb();
-
-	/*
-	 * during the path that leads here preemption is disabled,
-	 * reenable it now so that when coming up preempt count is
-	 * zero correctly
-	 */
-	preempt_enable();
-
-	/*
-	 * hard-disable interrupts for the non-NAP case, the NAP code
-	 * needs to re-enable interrupts (but soft-disables them)
-	 */
-	hard_irq_disable();
-
-	while (1) {
-		/* let's not take timer interrupts too often ... */
-		set_dec(0x7fffffff);
-
-		/* should always be true at this point */
-		if (cpu_has_feature(CPU_FTR_CAN_NAP))
-			power4_cpu_offline_powersave();
-		else {
-			HMT_low();
-			HMT_very_low();
-		}
-	}
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
 #endif /* CONFIG_PPC64 */
 
 define_machine(powermac) {
@@ -726,15 +681,4 @@ define_machine(powermac) {
 	.pcibios_after_init	= pmac_pcibios_after_init,
 	.phys_mem_access_prot	= pci_phys_mem_access_prot,
 #endif
-#ifdef CONFIG_HOTPLUG_CPU
-#ifdef CONFIG_PPC64
-	.cpu_die		= pmac64_cpu_die,
-#endif
-#ifdef CONFIG_PPC32
-	.cpu_die		= pmac32_cpu_die,
-#endif
-#endif
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
-	.cpu_die		= generic_mach_cpu_die,
-#endif
 };
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index c95215f4f8b..db092d7c4c5 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -70,7 +70,7 @@ static void (*pmac_tb_freeze)(int freeze);
 static u64 timebase;
 static int tb_req;
 
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_PMAC32_PSURGE
 
 /*
  * Powersurge (old powermac SMP) support.
@@ -124,6 +124,10 @@ static volatile u32 __iomem *psurge_start;
 /* what sort of powersurge board we have */
 static int psurge_type = PSURGE_NONE;
 
+/* irq for secondary cpus to report */
+static struct irq_host *psurge_host;
+int psurge_secondary_virq;
+
 /*
  * Set and clear IPIs for powersurge.
  */
@@ -156,51 +160,52 @@ static inline void psurge_clr_ipi(int cpu)
 /*
  * On powersurge (old SMP powermac architecture) we don't have
  * separate IPIs for separate messages like openpic does.  Instead
- * we have a bitmap for each processor, where a 1 bit means that
- * the corresponding message is pending for that processor.
- * Ideally each cpu's entry would be in a different cache line.
+ * use the generic demux helpers
  *  -- paulus.
  */
-static unsigned long psurge_smp_message[NR_CPUS];
-
-void psurge_smp_message_recv(void)
+static irqreturn_t psurge_ipi_intr(int irq, void *d)
 {
-	int cpu = smp_processor_id();
-	int msg;
-
-	/* clear interrupt */
-	psurge_clr_ipi(cpu);
+	psurge_clr_ipi(smp_processor_id());
+	smp_ipi_demux();
 
-	if (num_online_cpus() < 2)
-		return;
+	return IRQ_HANDLED;
+}
 
-	/* make sure there is a message there */
-	for (msg = 0; msg < 4; msg++)
-		if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
-			smp_message_recv(msg);
+static void smp_psurge_cause_ipi(int cpu, unsigned long data)
+{
+	psurge_set_ipi(cpu);
 }
 
-irqreturn_t psurge_primary_intr(int irq, void *d)
+static int psurge_host_map(struct irq_host *h, unsigned int virq,
+			 irq_hw_number_t hw)
 {
-	psurge_smp_message_recv();
-	return IRQ_HANDLED;
+	irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_percpu_irq);
+
+	return 0;
 }
 
-static void smp_psurge_message_pass(int target, int msg)
+struct irq_host_ops psurge_host_ops = {
+	.map	= psurge_host_map,
+};
+
+static int psurge_secondary_ipi_init(void)
 {
-	int i;
+	int rc = -ENOMEM;
 
-	if (num_online_cpus() < 2)
-		return;
+	psurge_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
+		&psurge_host_ops, 0);
 
-	for_each_online_cpu(i) {
-		if (target == MSG_ALL
-		    || (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
-		    || target == i) {
-			set_bit(msg, &psurge_smp_message[i]);
-			psurge_set_ipi(i);
-		}
-	}
+	if (psurge_host)
+		psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
+
+	if (psurge_secondary_virq)
+		rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
+			IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+
+	if (rc)
+		pr_err("Failed to setup secondary cpu IPI\n");
+
+	return rc;
 }
 
 /*
@@ -311,6 +316,9 @@ static int __init smp_psurge_probe(void)
 		ncpus = 2;
 	}
 
+	if (psurge_secondary_ipi_init())
+		return 1;
+
 	psurge_start = ioremap(PSURGE_START, 4);
 	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
 
@@ -329,7 +337,7 @@ static int __init smp_psurge_probe(void)
 	return ncpus;
 }
 
-static void __init smp_psurge_kick_cpu(int nr)
+static int __init smp_psurge_kick_cpu(int nr)
 {
 	unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
 	unsigned long a, flags;
@@ -394,11 +402,13 @@ static void __init smp_psurge_kick_cpu(int nr)
 		psurge_set_ipi(1);
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
+
+	return 0;
 }
 
 static struct irqaction psurge_irqaction = {
-	.handler = psurge_primary_intr,
-	.flags = IRQF_DISABLED,
+	.handler = psurge_ipi_intr,
+	.flags = IRQF_DISABLED|IRQF_PERCPU,
 	.name = "primary IPI",
 };
 
@@ -437,14 +447,15 @@ void __init smp_psurge_give_timebase(void)
 
 /* PowerSurge-style Macs */
 struct smp_ops_t psurge_smp_ops = {
-	.message_pass	= smp_psurge_message_pass,
+	.message_pass	= smp_muxed_ipi_message_pass,
+	.cause_ipi	= smp_psurge_cause_ipi,
 	.probe		= smp_psurge_probe,
 	.kick_cpu	= smp_psurge_kick_cpu,
 	.setup_cpu	= smp_psurge_setup_cpu,
 	.give_timebase	= smp_psurge_give_timebase,
 	.take_timebase	= smp_psurge_take_timebase,
 };
-#endif /* CONFIG_PPC32 - actually powersurge support */
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
 
 /*
  * Core 99 and later support
@@ -791,14 +802,14 @@ static int __init smp_core99_probe(void)
 	return ncpus;
 }
 
-static void __devinit smp_core99_kick_cpu(int nr)
+static int __devinit smp_core99_kick_cpu(int nr)
 {
 	unsigned int save_vector;
 	unsigned long target, flags;
 	unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100);
 
 	if (nr < 0 || nr > 3)
-		return;
+		return -ENOENT;
 
 	if (ppc_md.progress)
 		ppc_md.progress("smp_core99_kick_cpu", 0x346);
@@ -830,6 +841,8 @@ static void __devinit smp_core99_kick_cpu(int nr)
 
 	local_irq_restore(flags);
 	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+
+	return 0;
 }
 
 static void __devinit smp_core99_setup_cpu(int cpu_nr)
@@ -840,92 +853,151 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 
 	/* Setup openpic */
 	mpic_setup_this_cpu();
+}
 
-	if (cpu_nr == 0) {
 #ifdef CONFIG_PPC64
-		extern void g5_phy_disable_cpu1(void);
+#ifdef CONFIG_HOTPLUG_CPU
+static int smp_core99_cpu_notify(struct notifier_block *self,
+				 unsigned long action, void *hcpu)
+{
+	int rc;
 
-		/* Close i2c bus if it was used for tb sync */
+	switch(action) {
+	case CPU_UP_PREPARE:
+	case CPU_UP_PREPARE_FROZEN:
+		/* Open i2c bus if it was used for tb sync */
 		if (pmac_tb_clock_chip_host) {
-			pmac_i2c_close(pmac_tb_clock_chip_host);
-			pmac_tb_clock_chip_host	= NULL;
+			rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1);
+			if (rc) {
+				pr_err("Failed to open i2c bus for time sync\n");
+				return notifier_from_errno(rc);
+			}
 		}
+		break;
+	case CPU_ONLINE:
+	case CPU_UP_CANCELED:
+		/* Close i2c bus if it was used for tb sync */
+		if (pmac_tb_clock_chip_host)
+			pmac_i2c_close(pmac_tb_clock_chip_host);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
 
-		/* If we didn't start the second CPU, we must take
-		 * it off the bus
-		 */
-		if (of_machine_is_compatible("MacRISC4") &&
-		    num_online_cpus() < 2)		
-			g5_phy_disable_cpu1();
-#endif /* CONFIG_PPC64 */
+static struct notifier_block __cpuinitdata smp_core99_cpu_nb = {
+	.notifier_call	= smp_core99_cpu_notify,
+};
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static void __init smp_core99_bringup_done(void)
+{
+	extern void g5_phy_disable_cpu1(void);
 
-		if (ppc_md.progress)
-			ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+	/* Close i2c bus if it was used for tb sync */
+	if (pmac_tb_clock_chip_host)
+		pmac_i2c_close(pmac_tb_clock_chip_host);
+
+	/* If we didn't start the second CPU, we must take
+	 * it off the bus.
+	 */
+	if (of_machine_is_compatible("MacRISC4") &&
+	    num_online_cpus() < 2) {
+		set_cpu_present(1, false);
+		g5_phy_disable_cpu1();
 	}
-}
+#ifdef CONFIG_HOTPLUG_CPU
+	register_cpu_notifier(&smp_core99_cpu_nb);
+#endif
 
+	if (ppc_md.progress)
+		ppc_md.progress("smp_core99_bringup_done", 0x349);
+}
+#endif /* CONFIG_PPC64 */
 
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+#ifdef CONFIG_HOTPLUG_CPU
 
-int smp_core99_cpu_disable(void)
+static int smp_core99_cpu_disable(void)
 {
-	set_cpu_online(smp_processor_id(), false);
+	int rc = generic_cpu_disable();
+	if (rc)
+		return rc;
 
-	/* XXX reset cpu affinity here */
 	mpic_cpu_set_priority(0xf);
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
-	mb();
-	udelay(20);
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
 	return 0;
 }
 
-static int cpu_dead[NR_CPUS];
+#ifdef CONFIG_PPC32
 
-void pmac32_cpu_die(void)
+static void pmac_cpu_die(void)
 {
+	int cpu = smp_processor_id();
+
 	local_irq_disable();
-	cpu_dead[smp_processor_id()] = 1;
+	idle_task_exit();
+	pr_debug("CPU%d offline\n", cpu);
+	generic_set_cpu_dead(cpu);
+	smp_wmb();
 	mb();
 	low_cpu_die();
 }
 
-void smp_core99_cpu_die(unsigned int cpu)
+#else /* CONFIG_PPC32 */
+
+static void pmac_cpu_die(void)
 {
-	int timeout;
+	int cpu = smp_processor_id();
 
-	timeout = 1000;
-	while (!cpu_dead[cpu]) {
-		if (--timeout == 0) {
-			printk("CPU %u refused to die!\n", cpu);
-			break;
-		}
-		msleep(1);
+	local_irq_disable();
+	idle_task_exit();
+
+	/*
+	 * turn off as much as possible, we'll be
+	 * kicked out as this will only be invoked
+	 * on core99 platforms for now ...
+	 */
+
+	printk(KERN_INFO "CPU#%d offline\n", cpu);
+	generic_set_cpu_dead(cpu);
+	smp_wmb();
+
+	/*
+	 * Re-enable interrupts. The NAP code needs to enable them
+	 * anyways, do it now so we deal with the case where one already
+	 * happened while soft-disabled.
+	 * We shouldn't get any external interrupts, only decrementer, and the
+	 * decrementer handler is safe for use on offline CPUs
+	 */
+	local_irq_enable();
+
+	while (1) {
+		/* let's not take timer interrupts too often ... */
+		set_dec(0x7fffffff);
+
+		/* Enter NAP mode */
+		power4_idle();
 	}
-	cpu_dead[cpu] = 0;
 }
 
-#endif /* CONFIG_HOTPLUG_CPU && CONFIG_PP32 */
+#endif /* else CONFIG_PPC32 */
+#endif /* CONFIG_HOTPLUG_CPU */
 
 /* Core99 Macs (dual G4s and G5s) */
 struct smp_ops_t core99_smp_ops = {
 	.message_pass	= smp_mpic_message_pass,
 	.probe		= smp_core99_probe,
+#ifdef CONFIG_PPC64
+	.bringup_done	= smp_core99_bringup_done,
+#endif
 	.kick_cpu	= smp_core99_kick_cpu,
 	.setup_cpu	= smp_core99_setup_cpu,
 	.give_timebase	= smp_core99_give_timebase,
 	.take_timebase	= smp_core99_take_timebase,
 #if defined(CONFIG_HOTPLUG_CPU)
-# if defined(CONFIG_PPC32)
 	.cpu_disable	= smp_core99_cpu_disable,
-	.cpu_die	= smp_core99_cpu_die,
-# endif
-# if defined(CONFIG_PPC64)
-	.cpu_disable	= generic_cpu_disable,
 	.cpu_die	= generic_cpu_die,
-	/* intentionally do *NOT* assign cpu_enable,
-	 * the generic code will use kick_cpu then! */
-# endif
 #endif
 };
 
@@ -943,7 +1015,7 @@ void __init pmac_setup_smp(void)
 		of_node_put(np);
 		smp_ops = &core99_smp_ops;
 	}
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_PMAC32_PSURGE
 	else {
 		/* We have to set bits in cpu_possible_mask here since the
 		 * secondary CPU(s) aren't in the device tree. Various
@@ -956,6 +1028,11 @@ void __init pmac_setup_smp(void)
 			set_cpu_possible(cpu, true);
 		smp_ops = &psurge_smp_ops;
 	}
-#endif /* CONFIG_PPC32 */
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
+
+#ifdef CONFIG_HOTPLUG_CPU
+	ppc_md.cpu_die = pmac_cpu_die;
+#endif
 }
 
+
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index f2f6413b81d..600ed2c0ed5 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -197,7 +197,7 @@ static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
 	result = irq_set_chip_data(*virq, pd);
 
 	if (result) {
-		pr_debug("%s:%d: set_irq_chip_data failed\n",
+		pr_debug("%s:%d: irq_set_chip_data failed\n",
 			__func__, __LINE__);
 		goto fail_set;
 	}
@@ -659,11 +659,6 @@ static void __maybe_unused _dump_mask(struct ps3_private *pd,
 static void dump_bmp(struct ps3_private* pd) {};
 #endif /* defined(DEBUG) */
 
-static void ps3_host_unmap(struct irq_host *h, unsigned int virq)
-{
-	irq_set_chip_data(virq, NULL);
-}
-
 static int ps3_host_map(struct irq_host *h, unsigned int virq,
 	irq_hw_number_t hwirq)
 {
@@ -683,7 +678,6 @@ static int ps3_host_match(struct irq_host *h, struct device_node *np)
 
 static struct irq_host_ops ps3_host_ops = {
 	.map = ps3_host_map,
-	.unmap = ps3_host_unmap,
 	.match = ps3_host_match,
 };
 
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index 51ffde40af2..4c44794faac 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -39,7 +39,7 @@
 #define MSG_COUNT 4
 static DEFINE_PER_CPU(unsigned int [MSG_COUNT], ps3_ipi_virqs);
 
-static void do_message_pass(int target, int msg)
+static void ps3_smp_message_pass(int cpu, int msg)
 {
 	int result;
 	unsigned int virq;
@@ -49,28 +49,12 @@ static void do_message_pass(int target, int msg)
 		return;
 	}
 
-	virq = per_cpu(ps3_ipi_virqs, target)[msg];
+	virq = per_cpu(ps3_ipi_virqs, cpu)[msg];
 	result = ps3_send_event_locally(virq);
 
 	if (result)
 		DBG("%s:%d: ps3_send_event_locally(%d, %d) failed"
-			" (%d)\n", __func__, __LINE__, target, msg, result);
-}
-
-static void ps3_smp_message_pass(int target, int msg)
-{
-	int cpu;
-
-	if (target < NR_CPUS)
-		do_message_pass(target, msg);
-	else if (target == MSG_ALL_BUT_SELF) {
-		for_each_online_cpu(cpu)
-			if (cpu != smp_processor_id())
-				do_message_pass(cpu, msg);
-	} else {
-		for_each_online_cpu(cpu)
-			do_message_pass(cpu, msg);
-	}
+			" (%d)\n", __func__, __LINE__, cpu, msg, result);
 }
 
 static int ps3_smp_probe(void)
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 39a472e9e80..375a9f92158 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -197,7 +197,7 @@ static void spu_unmap(struct spu *spu)
  * The current HV requires the spu shadow regs to be mapped with the
  * PTE page protection bits set as read-only (PP=3).  This implementation
  * uses the low level __ioremap() to bypass the page protection settings
- * inforced by ioremap_flags() to get the needed PTE bits set for the
+ * inforced by ioremap_prot() to get the needed PTE bits set for the
  * shadow regs.
  */
 
@@ -214,7 +214,7 @@ static int __init setup_areas(struct spu *spu)
 		goto fail_ioremap;
 	}
 
-	spu->local_store = (__force void *)ioremap_flags(spu->local_store_phys,
+	spu->local_store = (__force void *)ioremap_prot(spu->local_store_phys,
 		LS_SIZE, _PAGE_NO_CACHE);
 
 	if (!spu->local_store) {
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 5b3da4b4ea7..71af4c5d6c0 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -3,7 +3,10 @@ config PPC_PSERIES
 	bool "IBM pSeries & new (POWER5-based) iSeries"
 	select MPIC
 	select PCI_MSI
-	select XICS
+	select PPC_XICS
+	select PPC_ICP_NATIVE
+	select PPC_ICP_HV
+	select PPC_ICS_RTAS
 	select PPC_I8259
 	select PPC_RTAS
 	select PPC_RTAS_DAEMON
@@ -47,6 +50,24 @@ config SCANLOG
 	tristate "Scanlog dump interface"
 	depends on RTAS_PROC && PPC_PSERIES
 
+config IO_EVENT_IRQ
+	bool "IO Event Interrupt support"
+	depends on PPC_PSERIES
+	default y
+	help
+	  Select this option, if you want to enable support for IO Event
+	  interrupts. IO event interrupt is a mechanism provided by RTAS
+	  to return information about hardware error and non-error events
+	  which may need OS attention. RTAS returns events for multiple
+	  event types and scopes. Device drivers can register their handlers
+	  to receive events.
+
+	  This option will only enable the IO event platform code. You
+	  will still need to enable or compile the actual drivers
+	  that use this infrastruture to handle IO event interrupts.
+
+	  Say Y if you are unsure.
+
 config LPARCFG
 	bool "LPAR Configuration Data"
 	depends on PPC_PSERIES || PPC_ISERIES
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index fc5237810ec..3556e402cbf 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -5,7 +5,6 @@ obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
 			   setup.o iommu.o event_sources.o ras.o \
 			   firmware.o power.o dlpar.o mobility.o
 obj-$(CONFIG_SMP)	+= smp.o
-obj-$(CONFIG_XICS)	+= xics.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
 obj-$(CONFIG_EEH)	+= eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o
 obj-$(CONFIG_KEXEC)	+= kexec.o
@@ -22,6 +21,7 @@ obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
 obj-$(CONFIG_PHYP_DUMP)		+= phyp_dump.o
 obj-$(CONFIG_CMM)		+= cmm.o
 obj-$(CONFIG_DTL)		+= dtl.o
+obj-$(CONFIG_IO_EVENT_IRQ)	+= io_event_irq.o
 
 ifeq ($(CONFIG_PPC_PSERIES),y)
 obj-$(CONFIG_SUSPEND)		+= suspend.o
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index b74a9230edc..57ceb92b228 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -74,7 +74,7 @@ static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
 		return NULL;
 
 	/* The configure connector reported name does not contain a
-	 * preceeding '/', so we allocate a buffer large enough to
+	 * preceding '/', so we allocate a buffer large enough to
 	 * prepend this to the full_name.
 	 */
 	name = (char *)ccwa + ccwa->name_offset;
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index c371bc06434..e9190073bb9 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -52,10 +52,10 @@ static u8 dtl_event_mask = 0x7;
 
 
 /*
- * Size of per-cpu log buffers. Default is just under 16 pages worth.
+ * Size of per-cpu log buffers. Firmware requires that the buffer does
+ * not cross a 4k boundary.
  */
-static int dtl_buf_entries = (16 * 85);
-
+static int dtl_buf_entries = N_DISPATCH_LOG;
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 struct dtl_ring {
@@ -151,7 +151,7 @@ static int dtl_start(struct dtl *dtl)
 
 	/* Register our dtl buffer with the hypervisor. The HV expects the
 	 * buffer size to be passed in the second word of the buffer */
-	((u32 *)dtl->buf)[1] = dtl->buf_entries * sizeof(struct dtl_entry);
+	((u32 *)dtl->buf)[1] = DISPATCH_LOG_BYTES;
 
 	hwcpu = get_hard_smp_processor_id(dtl->cpu);
 	addr = __pa(dtl->buf);
@@ -196,13 +196,15 @@ static int dtl_enable(struct dtl *dtl)
 	long int rc;
 	struct dtl_entry *buf = NULL;
 
+	if (!dtl_cache)
+		return -ENOMEM;
+
 	/* only allow one reader */
 	if (dtl->buf)
 		return -EBUSY;
 
 	n_entries = dtl_buf_entries;
-	buf = kmalloc_node(n_entries * sizeof(struct dtl_entry),
-			GFP_KERNEL, cpu_to_node(dtl->cpu));
+	buf = kmem_cache_alloc_node(dtl_cache, GFP_KERNEL, cpu_to_node(dtl->cpu));
 	if (!buf) {
 		printk(KERN_WARNING "%s: buffer alloc failed for cpu %d\n",
 				__func__, dtl->cpu);
@@ -223,7 +225,7 @@ static int dtl_enable(struct dtl *dtl)
 	spin_unlock(&dtl->lock);
 
 	if (rc)
-		kfree(buf);
+		kmem_cache_free(dtl_cache, buf);
 	return rc;
 }
 
@@ -231,7 +233,7 @@ static void dtl_disable(struct dtl *dtl)
 {
 	spin_lock(&dtl->lock);
 	dtl_stop(dtl);
-	kfree(dtl->buf);
+	kmem_cache_free(dtl_cache, dtl->buf);
 	dtl->buf = NULL;
 	dtl->buf_entries = 0;
 	spin_unlock(&dtl->lock);
@@ -365,7 +367,7 @@ static int dtl_init(void)
 
 	event_mask_file = debugfs_create_x8("dtl_event_mask", 0600,
 				dtl_dir, &dtl_event_mask);
-	buf_entries_file = debugfs_create_u32("dtl_buf_entries", 0600,
+	buf_entries_file = debugfs_create_u32("dtl_buf_entries", 0400,
 				dtl_dir, &dtl_buf_entries);
 
 	if (!event_mask_file || !buf_entries_file) {
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 3cc4d102b1f..46b55cf563e 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -65,7 +65,7 @@
  *  with EEH.
  *
  *  Ideally, a PCI device driver, when suspecting that an isolation
- *  event has occured (e.g. by reading 0xff's), will then ask EEH
+ *  event has occurred (e.g. by reading 0xff's), will then ask EEH
  *  whether this is the case, and then take appropriate steps to
  *  reset the PCI slot, the PCI device, and then resume operations.
  *  However, until that day,  the checking is done here, with the
@@ -93,6 +93,7 @@ static int ibm_slot_error_detail;
 static int ibm_get_config_addr_info;
 static int ibm_get_config_addr_info2;
 static int ibm_configure_bridge;
+static int ibm_configure_pe;
 
 int eeh_subsystem_enabled;
 EXPORT_SYMBOL(eeh_subsystem_enabled);
@@ -261,6 +262,8 @@ void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
 	pci_regs_buf[0] = 0;
 
 	rtas_pci_enable(pdn, EEH_THAW_MMIO);
+	rtas_configure_bridge(pdn);
+	eeh_restore_bars(pdn);
 	loglen = gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
 
 	rtas_slot_error_detail(pdn, severity, pci_regs_buf, loglen);
@@ -448,6 +451,39 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag)
 	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
 }
 
+void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset)
+{
+	struct device_node *dn;
+
+	for_each_child_of_node(parent, dn) {
+		if (PCI_DN(dn)) {
+
+			struct pci_dev *dev = PCI_DN(dn)->pcidev;
+
+			if (dev && dev->driver)
+				*freset |= dev->needs_freset;
+
+			__eeh_set_pe_freset(dn, freset);
+		}
+	}
+}
+
+void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset)
+{
+	struct pci_dev *dev;
+	dn = find_device_pe(dn);
+
+	/* Back up one, since config addrs might be shared */
+	if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+		dn = dn->parent;
+
+	dev = PCI_DN(dn)->pcidev;
+	if (dev)
+		*freset |= dev->needs_freset;
+
+	__eeh_set_pe_freset(dn, freset);
+}
+
 /**
  * eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze
  * @dn device node
@@ -692,15 +728,24 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state)
 	if (pdn->eeh_pe_config_addr)
 		config_addr = pdn->eeh_pe_config_addr;
 
-	rc = rtas_call(ibm_set_slot_reset,4,1, NULL,
+	rc = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
 	               config_addr,
 	               BUID_HI(pdn->phb->buid),
 	               BUID_LO(pdn->phb->buid),
 	               state);
-	if (rc)
-		printk (KERN_WARNING "EEH: Unable to reset the failed slot,"
-		        " (%d) #RST=%d dn=%s\n",
-		        rc, state, pdn->node->full_name);
+
+	/* Fundamental-reset not supported on this PE, try hot-reset */
+	if (rc == -8 && state == 3) {
+		rc = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+			       config_addr,
+			       BUID_HI(pdn->phb->buid),
+			       BUID_LO(pdn->phb->buid), 1);
+		if (rc)
+			printk(KERN_WARNING
+				"EEH: Unable to reset the failed slot,"
+				" #RST=%d dn=%s\n",
+				rc, pdn->node->full_name);
+	}
 }
 
 /**
@@ -736,18 +781,21 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 /**
  * rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
  * @pdn: pci device node to be reset.
- *
- *  Return 0 if success, else a non-zero value.
  */
 
 static void __rtas_set_slot_reset(struct pci_dn *pdn)
 {
-	struct pci_dev *dev = pdn->pcidev;
+	unsigned int freset = 0;
 
-	/* Determine type of EEH reset required by device,
-	 * default hot reset or fundamental reset
-	 */
-	if (dev && dev->needs_freset)
+	/* Determine type of EEH reset required for
+	 * Partitionable Endpoint, a hot-reset (1)
+	 * or a fundamental reset (3).
+	 * A fundamental reset required by any device under
+	 * Partitionable Endpoint trumps hot-reset.
+  	 */
+	eeh_set_pe_freset(pdn->node, &freset);
+
+	if (freset)
 		rtas_pci_slot_reset(pdn, 3);
 	else
 		rtas_pci_slot_reset(pdn, 1);
@@ -895,13 +943,20 @@ rtas_configure_bridge(struct pci_dn *pdn)
 {
 	int config_addr;
 	int rc;
+	int token;
 
 	/* Use PE configuration address, if present */
 	config_addr = pdn->eeh_config_addr;
 	if (pdn->eeh_pe_config_addr)
 		config_addr = pdn->eeh_pe_config_addr;
 
-	rc = rtas_call(ibm_configure_bridge,3,1, NULL,
+	/* Use new configure-pe function, if supported */
+	if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE)
+		token = ibm_configure_pe;
+	else
+		token = ibm_configure_bridge;
+
+	rc = rtas_call(token, 3, 1, NULL,
 	               config_addr,
 	               BUID_HI(pdn->phb->buid),
 	               BUID_LO(pdn->phb->buid));
@@ -1077,6 +1132,7 @@ void __init eeh_init(void)
 	ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
 	ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
 	ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
+	ibm_configure_pe = rtas_token("ibm,configure-pe");
 
 	if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
 		return;
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index b8d70f5d9aa..1b6cb10589e 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -328,7 +328,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 	struct pci_bus *frozen_bus;
 	int rc = 0;
 	enum pci_ers_result result = PCI_ERS_RESULT_NONE;
-	const char *location, *pci_str, *drv_str;
+	const char *location, *pci_str, *drv_str, *bus_pci_str, *bus_drv_str;
 
 	frozen_dn = find_device_pe(event->dn);
 	if (!frozen_dn) {
@@ -364,13 +364,8 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 	frozen_pdn = PCI_DN(frozen_dn);
 	frozen_pdn->eeh_freeze_count++;
 
-	if (frozen_pdn->pcidev) {
-		pci_str = pci_name (frozen_pdn->pcidev);
-		drv_str = pcid_name (frozen_pdn->pcidev);
-	} else {
-		pci_str = eeh_pci_name(event->dev);
-		drv_str = pcid_name (event->dev);
-	}
+	pci_str = eeh_pci_name(event->dev);
+	drv_str = pcid_name(event->dev);
 	
 	if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
 		goto excess_failures;
@@ -378,8 +373,17 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 	printk(KERN_WARNING
 	   "EEH: This PCI device has failed %d times in the last hour:\n",
 		frozen_pdn->eeh_freeze_count);
+
+	if (frozen_pdn->pcidev) {
+		bus_pci_str = pci_name(frozen_pdn->pcidev);
+		bus_drv_str = pcid_name(frozen_pdn->pcidev);
+		printk(KERN_WARNING
+			"EEH: Bus location=%s driver=%s pci addr=%s\n",
+			location, bus_drv_str, bus_pci_str);
+	}
+
 	printk(KERN_WARNING
-		"EEH: location=%s driver=%s pci addr=%s\n",
+		"EEH: Device location=%s driver=%s pci addr=%s\n",
 		location, drv_str, pci_str);
 
 	/* Walk the various device drivers attached to this slot through
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index fd50ccd4bac..46f13a3c5d0 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/cpu.h>
 #include <asm/system.h>
@@ -28,7 +29,7 @@
 #include <asm/machdep.h>
 #include <asm/vdso_datapage.h>
 #include <asm/pSeries_reconfig.h>
-#include "xics.h"
+#include <asm/xics.h>
 #include "plpar_wrappers.h"
 #include "offline_states.h"
 
@@ -216,7 +217,7 @@ static void pseries_cpu_die(unsigned int cpu)
 		       cpu, pcpu, cpu_status);
 	}
 
-	/* Isolation and deallocation are definatly done by
+	/* Isolation and deallocation are definitely done by
 	 * drslot_chrp_cpu.  If they were not they would be
 	 * done here.  Change isolate state to Isolate and
 	 * change allocation-state to Unusable.
@@ -280,7 +281,7 @@ static int pseries_add_processor(struct device_node *np)
 	}
 
 	for_each_cpu(cpu, tmp) {
-		BUG_ON(cpumask_test_cpu(cpu, cpu_present_mask));
+		BUG_ON(cpu_present(cpu));
 		set_cpu_present(cpu, true);
 		set_hard_smp_processor_id(cpu, *intserv++);
 	}
diff --git a/arch/powerpc/platforms/pseries/io_event_irq.c b/arch/powerpc/platforms/pseries/io_event_irq.c
new file mode 100644
index 00000000000..c829e6067d5
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/io_event_irq.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2010 2011 Mark Nelson and Tseng-Hui (Frank) Lin, IBM Corporation
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include <asm/irq.h>
+#include <asm/io_event_irq.h>
+
+#include "pseries.h"
+
+/*
+ * IO event interrupt is a mechanism provided by RTAS to return
+ * information about hardware error and non-error events. Device
+ * drivers can register their event handlers to receive events.
+ * Device drivers are expected to use atomic_notifier_chain_register()
+ * and atomic_notifier_chain_unregister() to register and unregister
+ * their event handlers. Since multiple IO event types and scopes
+ * share an IO event interrupt, the event handlers are called one
+ * by one until the IO event is claimed by one of the handlers.
+ * The event handlers are expected to return NOTIFY_OK if the
+ * event is handled by the event handler or NOTIFY_DONE if the
+ * event does not belong to the handler.
+ *
+ * Usage:
+ *
+ * Notifier function:
+ * #include <asm/io_event_irq.h>
+ * int event_handler(struct notifier_block *nb, unsigned long val, void *data) {
+ * 	p = (struct pseries_io_event_sect_data *) data;
+ * 	if (! is_my_event(p->scope, p->event_type)) return NOTIFY_DONE;
+ * 		:
+ * 		:
+ * 	return NOTIFY_OK;
+ * }
+ * struct notifier_block event_nb = {
+ * 	.notifier_call = event_handler,
+ * }
+ *
+ * Registration:
+ * atomic_notifier_chain_register(&pseries_ioei_notifier_list, &event_nb);
+ *
+ * Unregistration:
+ * atomic_notifier_chain_unregister(&pseries_ioei_notifier_list, &event_nb);
+ */
+
+ATOMIC_NOTIFIER_HEAD(pseries_ioei_notifier_list);
+EXPORT_SYMBOL_GPL(pseries_ioei_notifier_list);
+
+static int ioei_check_exception_token;
+
+/* pSeries event log format */
+
+/* Two bytes ASCII section IDs */
+#define PSERIES_ELOG_SECT_ID_PRIV_HDR		(('P' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_USER_HDR		(('U' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_PRIMARY_SRC	(('P' << 8) | 'S')
+#define PSERIES_ELOG_SECT_ID_EXTENDED_UH	(('E' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_FAILING_MTMS	(('M' << 8) | 'T')
+#define PSERIES_ELOG_SECT_ID_SECONDARY_SRC	(('S' << 8) | 'S')
+#define PSERIES_ELOG_SECT_ID_DUMP_LOCATOR	(('D' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_FW_ERROR		(('S' << 8) | 'W')
+#define PSERIES_ELOG_SECT_ID_IMPACT_PART_ID	(('L' << 8) | 'P')
+#define PSERIES_ELOG_SECT_ID_LOGIC_RESOURCE_ID	(('L' << 8) | 'R')
+#define PSERIES_ELOG_SECT_ID_HMC_ID		(('H' << 8) | 'M')
+#define PSERIES_ELOG_SECT_ID_EPOW		(('E' << 8) | 'P')
+#define PSERIES_ELOG_SECT_ID_IO_EVENT		(('I' << 8) | 'E')
+#define PSERIES_ELOG_SECT_ID_MANUFACT_INFO	(('M' << 8) | 'I')
+#define PSERIES_ELOG_SECT_ID_CALL_HOME		(('C' << 8) | 'H')
+#define PSERIES_ELOG_SECT_ID_USER_DEF		(('U' << 8) | 'D')
+
+/* Vendor specific Platform Event Log Format, Version 6, section header */
+struct pseries_elog_section {
+	uint16_t id;			/* 0x00 2-byte ASCII section ID	*/
+	uint16_t length;		/* 0x02 Section length in bytes	*/
+	uint8_t version;		/* 0x04 Section version		*/
+	uint8_t subtype;		/* 0x05 Section subtype		*/
+	uint16_t creator_component;	/* 0x06 Creator component ID	*/
+	uint8_t data[];			/* 0x08 Start of section data	*/
+};
+
+static char ioei_rtas_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned;
+
+/**
+ * Find data portion of a specific section in RTAS extended event log.
+ * @elog: RTAS error/event log.
+ * @sect_id: secsion ID.
+ *
+ * Return:
+ *	pointer to the section data of the specified section
+ *	NULL if not found
+ */
+static struct pseries_elog_section *find_xelog_section(struct rtas_error_log *elog,
+						       uint16_t sect_id)
+{
+	struct rtas_ext_event_log_v6 *xelog =
+		(struct rtas_ext_event_log_v6 *) elog->buffer;
+	struct pseries_elog_section *sect;
+	unsigned char *p, *log_end;
+
+	/* Check that we understand the format */
+	if (elog->extended_log_length < sizeof(struct rtas_ext_event_log_v6) ||
+	    xelog->log_format != RTAS_V6EXT_LOG_FORMAT_EVENT_LOG ||
+	    xelog->company_id != RTAS_V6EXT_COMPANY_ID_IBM)
+		return NULL;
+
+	log_end = elog->buffer + elog->extended_log_length;
+	p = xelog->vendor_log;
+	while (p < log_end) {
+		sect = (struct pseries_elog_section *)p;
+		if (sect->id == sect_id)
+			return sect;
+		p += sect->length;
+	}
+	return NULL;
+}
+
+/**
+ * Find the data portion of an IO Event section from event log.
+ * @elog: RTAS error/event log.
+ *
+ * Return:
+ * 	pointer to a valid IO event section data. NULL if not found.
+ */
+static struct pseries_io_event * ioei_find_event(struct rtas_error_log *elog)
+{
+	struct pseries_elog_section *sect;
+
+	/* We should only ever get called for io-event interrupts, but if
+	 * we do get called for another type then something went wrong so
+	 * make some noise about it.
+	 * RTAS_TYPE_IO only exists in extended event log version 6 or later.
+	 * No need to check event log version.
+	 */
+	if (unlikely(elog->type != RTAS_TYPE_IO)) {
+		printk_once(KERN_WARNING "io_event_irq: Unexpected event type %d",
+			    elog->type);
+		return NULL;
+	}
+
+	sect = find_xelog_section(elog, PSERIES_ELOG_SECT_ID_IO_EVENT);
+	if (unlikely(!sect)) {
+		printk_once(KERN_WARNING "io_event_irq: RTAS extended event "
+			    "log does not contain an IO Event section. "
+			    "Could be a bug in system firmware!\n");
+		return NULL;
+	}
+	return (struct pseries_io_event *) &sect->data;
+}
+
+/*
+ * PAPR:
+ * - check-exception returns the first found error or event and clear that
+ *   error or event so it is reported once.
+ * - Each interrupt returns one event. If a plateform chooses to report
+ *   multiple events through a single interrupt, it must ensure that the
+ *   interrupt remains asserted until check-exception has been used to
+ *   process all out-standing events for that interrupt.
+ *
+ * Implementation notes:
+ * - Events must be processed in the order they are returned. Hence,
+ *   sequential in nature.
+ * - The owner of an event is determined by combinations of scope,
+ *   event type, and sub-type. There is no easy way to pre-sort clients
+ *   by scope or event type alone. For example, Torrent ISR route change
+ *   event is reported with scope 0x00 (Not Applicatable) rather than
+ *   0x3B (Torrent-hub). It is better to let the clients to identify
+ *   who owns the the event.
+ */
+
+static irqreturn_t ioei_interrupt(int irq, void *dev_id)
+{
+	struct pseries_io_event *event;
+	int rtas_rc;
+
+	for (;;) {
+		rtas_rc = rtas_call(ioei_check_exception_token, 6, 1, NULL,
+				    RTAS_VECTOR_EXTERNAL_INTERRUPT,
+				    virq_to_hw(irq),
+				    RTAS_IO_EVENTS, 1 /* Time Critical */,
+				    __pa(ioei_rtas_buf),
+				    RTAS_DATA_BUF_SIZE);
+		if (rtas_rc != 0)
+			break;
+
+		event = ioei_find_event((struct rtas_error_log *)ioei_rtas_buf);
+		if (!event)
+			continue;
+
+		atomic_notifier_call_chain(&pseries_ioei_notifier_list,
+					   0, event);
+	}
+	return IRQ_HANDLED;
+}
+
+static int __init ioei_init(void)
+{
+	struct device_node *np;
+
+	ioei_check_exception_token = rtas_token("check-exception");
+	if (ioei_check_exception_token == RTAS_UNKNOWN_SERVICE) {
+		pr_warning("IO Event IRQ not supported on this system !\n");
+		return -ENODEV;
+	}
+	np = of_find_node_by_path("/event-sources/ibm,io-events");
+	if (np) {
+		request_event_sources_irqs(np, ioei_interrupt, "IO_EVENT");
+		of_node_put(np);
+	} else {
+		pr_err("io_event_irq: No ibm,io-events on system! "
+		       "IO Event interrupt disabled.\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+machine_subsys_initcall(pseries, ioei_init);
+
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 154c464cdca..01faab9456c 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -272,7 +272,7 @@ static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum)
 	return tce_ret;
 }
 
-/* this is compatable with cells for the device tree property */
+/* this is compatible with cells for the device tree property */
 struct dynamic_dma_window_prop {
 	__be32	liobn;		/* tce table number */
 	__be64	dma_base;	/* address hi,lo */
@@ -659,15 +659,18 @@ static void remove_ddw(struct device_node *np)
 {
 	struct dynamic_dma_window_prop *dwp;
 	struct property *win64;
-	const u32 *ddr_avail;
+	const u32 *ddw_avail;
 	u64 liobn;
 	int len, ret;
 
-	ddr_avail = of_get_property(np, "ibm,ddw-applicable", &len);
+	ddw_avail = of_get_property(np, "ibm,ddw-applicable", &len);
 	win64 = of_find_property(np, DIRECT64_PROPNAME, NULL);
-	if (!win64 || !ddr_avail || len < 3 * sizeof(u32))
+	if (!win64)
 		return;
 
+	if (!ddw_avail || len < 3 * sizeof(u32) || win64->length < sizeof(*dwp))
+		goto delprop;
+
 	dwp = win64->value;
 	liobn = (u64)be32_to_cpu(dwp->liobn);
 
@@ -681,28 +684,29 @@ static void remove_ddw(struct device_node *np)
 		pr_debug("%s successfully cleared tces in window.\n",
 			 np->full_name);
 
-	ret = rtas_call(ddr_avail[2], 1, 1, NULL, liobn);
+	ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn);
 	if (ret)
 		pr_warning("%s: failed to remove direct window: rtas returned "
 			"%d to ibm,remove-pe-dma-window(%x) %llx\n",
-			np->full_name, ret, ddr_avail[2], liobn);
+			np->full_name, ret, ddw_avail[2], liobn);
 	else
 		pr_debug("%s: successfully removed direct window: rtas returned "
 			"%d to ibm,remove-pe-dma-window(%x) %llx\n",
-			np->full_name, ret, ddr_avail[2], liobn);
-}
+			np->full_name, ret, ddw_avail[2], liobn);
 
+delprop:
+	ret = prom_remove_property(np, win64);
+	if (ret)
+		pr_warning("%s: failed to remove direct window property: %d\n",
+			np->full_name, ret);
+}
 
-static int dupe_ddw_if_already_created(struct pci_dev *dev, struct device_node *pdn)
+static u64 find_existing_ddw(struct device_node *pdn)
 {
-	struct device_node *dn;
-	struct pci_dn *pcidn;
 	struct direct_window *window;
 	const struct dynamic_dma_window_prop *direct64;
 	u64 dma_addr = 0;
 
-	dn = pci_device_to_OF_node(dev);
-	pcidn = PCI_DN(dn);
 	spin_lock(&direct_window_list_lock);
 	/* check if we already created a window and dupe that config if so */
 	list_for_each_entry(window, &direct_window_list, list) {
@@ -717,36 +721,40 @@ static int dupe_ddw_if_already_created(struct pci_dev *dev, struct device_node *
 	return dma_addr;
 }
 
-static u64 dupe_ddw_if_kexec(struct pci_dev *dev, struct device_node *pdn)
+static int find_existing_ddw_windows(void)
 {
-	struct device_node *dn;
-	struct pci_dn *pcidn;
 	int len;
+	struct device_node *pdn;
 	struct direct_window *window;
 	const struct dynamic_dma_window_prop *direct64;
-	u64 dma_addr = 0;
 
-	dn = pci_device_to_OF_node(dev);
-	pcidn = PCI_DN(dn);
-	direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len);
-	if (direct64) {
+	if (!firmware_has_feature(FW_FEATURE_LPAR))
+		return 0;
+
+	for_each_node_with_property(pdn, DIRECT64_PROPNAME) {
+		direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len);
+		if (!direct64)
+			continue;
+
 		window = kzalloc(sizeof(*window), GFP_KERNEL);
-		if (!window) {
+		if (!window || len < sizeof(struct dynamic_dma_window_prop)) {
+			kfree(window);
 			remove_ddw(pdn);
-		} else {
-			window->device = pdn;
-			window->prop = direct64;
-			spin_lock(&direct_window_list_lock);
-			list_add(&window->list, &direct_window_list);
-			spin_unlock(&direct_window_list_lock);
-			dma_addr = direct64->dma_base;
+			continue;
 		}
+
+		window->device = pdn;
+		window->prop = direct64;
+		spin_lock(&direct_window_list_lock);
+		list_add(&window->list, &direct_window_list);
+		spin_unlock(&direct_window_list_lock);
 	}
 
-	return dma_addr;
+	return 0;
 }
+machine_arch_initcall(pseries, find_existing_ddw_windows);
 
-static int query_ddw(struct pci_dev *dev, const u32 *ddr_avail,
+static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
 			struct ddw_query_response *query)
 {
 	struct device_node *dn;
@@ -767,15 +775,15 @@ static int query_ddw(struct pci_dev *dev, const u32 *ddr_avail,
 	if (pcidn->eeh_pe_config_addr)
 		cfg_addr = pcidn->eeh_pe_config_addr;
 	buid = pcidn->phb->buid;
-	ret = rtas_call(ddr_avail[0], 3, 5, (u32 *)query,
+	ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query,
 		  cfg_addr, BUID_HI(buid), BUID_LO(buid));
 	dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
-		" returned %d\n", ddr_avail[0], cfg_addr, BUID_HI(buid),
+		" returned %d\n", ddw_avail[0], cfg_addr, BUID_HI(buid),
 		BUID_LO(buid), ret);
 	return ret;
 }
 
-static int create_ddw(struct pci_dev *dev, const u32 *ddr_avail,
+static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
 			struct ddw_create_response *create, int page_shift,
 			int window_shift)
 {
@@ -800,12 +808,12 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddr_avail,
 
 	do {
 		/* extra outputs are LIOBN and dma-addr (hi, lo) */
-		ret = rtas_call(ddr_avail[1], 5, 4, (u32 *)create, cfg_addr,
+		ret = rtas_call(ddw_avail[1], 5, 4, (u32 *)create, cfg_addr,
 				BUID_HI(buid), BUID_LO(buid), page_shift, window_shift);
 	} while (rtas_busy_delay(ret));
 	dev_info(&dev->dev,
 		"ibm,create-pe-dma-window(%x) %x %x %x %x %x returned %d "
-		"(liobn = 0x%x starting addr = %x %x)\n", ddr_avail[1],
+		"(liobn = 0x%x starting addr = %x %x)\n", ddw_avail[1],
 		 cfg_addr, BUID_HI(buid), BUID_LO(buid), page_shift,
 		 window_shift, ret, create->liobn, create->addr_hi, create->addr_lo);
 
@@ -831,18 +839,14 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	int page_shift;
 	u64 dma_addr, max_addr;
 	struct device_node *dn;
-	const u32 *uninitialized_var(ddr_avail);
+	const u32 *uninitialized_var(ddw_avail);
 	struct direct_window *window;
-	struct property *uninitialized_var(win64);
+	struct property *win64;
 	struct dynamic_dma_window_prop *ddwprop;
 
 	mutex_lock(&direct_window_init_mutex);
 
-	dma_addr = dupe_ddw_if_already_created(dev, pdn);
-	if (dma_addr != 0)
-		goto out_unlock;
-
-	dma_addr = dupe_ddw_if_kexec(dev, pdn);
+	dma_addr = find_existing_ddw(pdn);
 	if (dma_addr != 0)
 		goto out_unlock;
 
@@ -854,8 +858,8 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	 * for the given node in that order.
 	 * the property is actually in the parent, not the PE
 	 */
-	ddr_avail = of_get_property(pdn, "ibm,ddw-applicable", &len);
-	if (!ddr_avail || len < 3 * sizeof(u32))
+	ddw_avail = of_get_property(pdn, "ibm,ddw-applicable", &len);
+	if (!ddw_avail || len < 3 * sizeof(u32))
 		goto out_unlock;
 
        /*
@@ -865,7 +869,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	 * of page sizes: supported and supported for migrate-dma.
 	 */
 	dn = pci_device_to_OF_node(dev);
-	ret = query_ddw(dev, ddr_avail, &query);
+	ret = query_ddw(dev, ddw_avail, &query);
 	if (ret != 0)
 		goto out_unlock;
 
@@ -907,13 +911,14 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 	}
 	win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL);
 	win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL);
+	win64->length = sizeof(*ddwprop);
 	if (!win64->name || !win64->value) {
 		dev_info(&dev->dev,
 			"couldn't allocate property name and value\n");
 		goto out_free_prop;
 	}
 
-	ret = create_ddw(dev, ddr_avail, &create, page_shift, len);
+	ret = create_ddw(dev, ddw_avail, &create, page_shift, len);
 	if (ret != 0)
 		goto out_free_prop;
 
@@ -976,7 +981,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 	pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev));
 
 	/* dev setup for LPAR is a little tricky, since the device tree might
-	 * contain the dma-window properties per-device and not neccesarily
+	 * contain the dma-window properties per-device and not necessarily
 	 * for the bus. So we need to search upwards in the tree until we
 	 * either hit a dma-window property, OR find a parent with a table
 	 * already allocated.
@@ -1021,19 +1026,22 @@ static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)
 	const void *dma_window = NULL;
 	u64 dma_offset;
 
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+	if (!dev->dma_mask)
 		return -EIO;
 
+	if (!dev_is_pci(dev))
+		goto check_mask;
+
+	pdev = to_pci_dev(dev);
+
 	/* only attempt to use a new window if 64-bit DMA is requested */
 	if (!disable_ddw && dma_mask == DMA_BIT_MASK(64)) {
-		pdev = to_pci_dev(dev);
-
 		dn = pci_device_to_OF_node(pdev);
 		dev_dbg(dev, "node is %s\n", dn->full_name);
 
 		/*
 		 * the device tree might contain the dma-window properties
-		 * per-device and not neccesarily for the bus. So we need to
+		 * per-device and not necessarily for the bus. So we need to
 		 * search upwards in the tree until we either hit a dma-window
 		 * property, OR find a parent with a table already allocated.
 		 */
@@ -1054,12 +1062,17 @@ static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)
 		}
 	}
 
-	/* fall-through to iommu ops */
-	if (!ddw_enabled) {
-		dev_info(dev, "Using 32-bit DMA via iommu\n");
+	/* fall back on iommu ops, restore table pointer with ops */
+	if (!ddw_enabled && get_dma_ops(dev) != &dma_iommu_ops) {
+		dev_info(dev, "Restoring 32-bit DMA via iommu\n");
 		set_dma_ops(dev, &dma_iommu_ops);
+		pci_dma_dev_setup_pSeriesLP(pdev);
 	}
 
+check_mask:
+	if (!dma_supported(dev, dma_mask))
+		return -EIO;
+
 	*dev->dma_mask = dma_mask;
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c
index 77d38a5e2ff..54cf3a4aa16 100644
--- a/arch/powerpc/platforms/pseries/kexec.c
+++ b/arch/powerpc/platforms/pseries/kexec.c
@@ -7,15 +7,18 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+
 #include <asm/machdep.h>
 #include <asm/page.h>
 #include <asm/firmware.h>
 #include <asm/kexec.h>
 #include <asm/mpic.h>
+#include <asm/xics.h>
 #include <asm/smp.h>
 
 #include "pseries.h"
-#include "xics.h"
 #include "plpar_wrappers.h"
 
 static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index ca5d5898d32..39e6e0a7b2f 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -329,6 +329,8 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	/* Make pHyp happy */
 	if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
 		hpte_r &= ~_PAGE_COHERENT;
+	if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N))
+		flags |= H_COALESCE_CAND;
 
 	lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
 	if (unlikely(lpar_rc == H_PTEG_FULL)) {
@@ -573,7 +575,7 @@ static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
 	unsigned long i, pix, rc;
 	unsigned long flags = 0;
 	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-	int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
+	int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
 	unsigned long param[9];
 	unsigned long va;
 	unsigned long hash, index, shift, hidx, slot;
@@ -771,3 +773,47 @@ out:
 	local_irq_restore(flags);
 }
 #endif
+
+/**
+ * h_get_mpp
+ * H_GET_MPP hcall returns info in 7 parms
+ */
+int h_get_mpp(struct hvcall_mpp_data *mpp_data)
+{
+	int rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9(H_GET_MPP, retbuf);
+
+	mpp_data->entitled_mem = retbuf[0];
+	mpp_data->mapped_mem = retbuf[1];
+
+	mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	mpp_data->pool_num = retbuf[2] & 0xffff;
+
+	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
+	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
+	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+
+	mpp_data->pool_size = retbuf[4];
+	mpp_data->loan_request = retbuf[5];
+	mpp_data->backing_mem = retbuf[6];
+
+	return rc;
+}
+EXPORT_SYMBOL(h_get_mpp);
+
+int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data)
+{
+	int rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE] = { 0 };
+
+	rc = plpar_hcall9(H_GET_MPP_X, retbuf);
+
+	mpp_x_data->coalesced_bytes = retbuf[0];
+	mpp_x_data->pool_coalesced_bytes = retbuf[1];
+	mpp_x_data->pool_purr_cycles = retbuf[2];
+	mpp_x_data->pool_spurr_cycles = retbuf[3];
+
+	return rc;
+}
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 419707b0724..00cc3a09488 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -480,8 +480,32 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 		const char *new_msgs, unsigned long new_len)
 {
 	static unsigned int oops_count = 0;
+	static bool panicking = false;
 	size_t text_len;
 
+	switch (reason) {
+	case KMSG_DUMP_RESTART:
+	case KMSG_DUMP_HALT:
+	case KMSG_DUMP_POWEROFF:
+		/* These are almost always orderly shutdowns. */
+		return;
+	case KMSG_DUMP_OOPS:
+	case KMSG_DUMP_KEXEC:
+		break;
+	case KMSG_DUMP_PANIC:
+		panicking = true;
+		break;
+	case KMSG_DUMP_EMERG:
+		if (panicking)
+			/* Panic report already captured. */
+			return;
+		break;
+	default:
+		pr_err("%s: ignoring unrecognized KMSG_DUMP_* reason %d\n",
+						__FUNCTION__, (int) reason);
+		return;
+	}
+
 	if (clobbering_unread_rtas_event())
 		return;
 
diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h
index 75a6f480d93..08672d9136a 100644
--- a/arch/powerpc/platforms/pseries/offline_states.h
+++ b/arch/powerpc/platforms/pseries/offline_states.h
@@ -34,6 +34,4 @@ static inline void set_default_offline_state(int cpu)
 #endif
 
 extern enum cpu_state_vals get_preferred_offline_state(int cpu);
-extern int start_secondary(void);
-extern void start_secondary_resume(void);
 #endif
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d9801117124..4bf21207d7d 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -270,31 +270,4 @@ static inline long plpar_put_term_char(unsigned long termno, unsigned long len,
 			lbuf[1]);
 }
 
-static inline long plpar_eoi(unsigned long xirr)
-{
-	return plpar_hcall_norets(H_EOI, xirr);
-}
-
-static inline long plpar_cppr(unsigned long cppr)
-{
-	return plpar_hcall_norets(H_CPPR, cppr);
-}
-
-static inline long plpar_ipi(unsigned long servernum, unsigned long mfrr)
-{
-	return plpar_hcall_norets(H_IPI, servernum, mfrr);
-}
-
-static inline long plpar_xirr(unsigned long *xirr_ret, unsigned char cppr)
-{
-	long rc;
-	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
-
-	rc = plpar_hcall(H_XIRR, retbuf, cppr);
-
-	*xirr_ret = retbuf[0];
-
-	return rc;
-}
-
 #endif /* _PSERIES_PLPAR_WRAPPERS_H */
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index c55d7ad9c64..086d2ae4e06 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -122,7 +122,7 @@ static irqreturn_t ras_epow_interrupt(int irq, void *dev_id)
 
 	status = rtas_call(ras_check_exception_token, 6, 1, NULL,
 			   RTAS_VECTOR_EXTERNAL_INTERRUPT,
-			   irq_map[irq].hwirq,
+			   virq_to_hw(irq),
 			   RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS,
 			   critical, __pa(&ras_log_buf),
 				rtas_get_error_log_max());
@@ -157,7 +157,7 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id)
 
 	status = rtas_call(ras_check_exception_token, 6, 1, NULL,
 			   RTAS_VECTOR_EXTERNAL_INTERRUPT,
-			   irq_map[irq].hwirq,
+			   virq_to_hw(irq),
 			   RTAS_INTERNAL_ERROR, 1 /*Time Critical */,
 			   __pa(&ras_log_buf),
 				rtas_get_error_log_max());
@@ -227,7 +227,7 @@ static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs)
 	struct rtas_error_log *h, *errhdr = NULL;
 
 	if (!VALID_FWNMI_BUFFER(regs->gpr[3])) {
-		printk(KERN_ERR "FWNMI: corrupt r3\n");
+		printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]);
 		return NULL;
 	}
 
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c319d04aa79..593acceeff9 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -53,9 +53,9 @@
 #include <asm/irq.h>
 #include <asm/time.h>
 #include <asm/nvram.h>
-#include "xics.h"
 #include <asm/pmc.h>
 #include <asm/mpic.h>
+#include <asm/xics.h>
 #include <asm/ppc-pci.h>
 #include <asm/i8259.h>
 #include <asm/udbg.h>
@@ -205,6 +205,9 @@ static void __init pseries_mpic_init_IRQ(void)
 		mpic_assign_isu(mpic, n, isuaddr);
 	}
 
+	/* Setup top-level get_irq */
+	ppc_md.get_irq = mpic_get_irq;
+
 	/* All ISUs are setup, complete initialization */
 	mpic_init(mpic);
 
@@ -214,7 +217,7 @@ static void __init pseries_mpic_init_IRQ(void)
 
 static void __init pseries_xics_init_IRQ(void)
 {
-	xics_init_IRQ();
+	xics_init();
 	pseries_setup_i8259_cascade();
 }
 
@@ -238,7 +241,6 @@ static void __init pseries_discover_pic(void)
 		if (strstr(typep, "open-pic")) {
 			pSeries_mpic_node = of_node_get(np);
 			ppc_md.init_IRQ       = pseries_mpic_init_IRQ;
-			ppc_md.get_irq        = mpic_get_irq;
 			setup_kexec_cpu_down_mpic();
 			smp_init_pseries_mpic();
 			return;
@@ -276,6 +278,8 @@ static struct notifier_block pci_dn_reconfig_nb = {
 	.notifier_call = pci_dn_reconfig_notifier,
 };
 
+struct kmem_cache *dtl_cache;
+
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 /*
  * Allocate space for the dispatch trace log for all possible cpus
@@ -291,10 +295,12 @@ static int alloc_dispatch_logs(void)
 	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
 		return 0;
 
+	if (!dtl_cache)
+		return 0;
+
 	for_each_possible_cpu(cpu) {
 		pp = &paca[cpu];
-		dtl = kmalloc_node(DISPATCH_LOG_BYTES, GFP_KERNEL,
-				   cpu_to_node(cpu));
+		dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL);
 		if (!dtl) {
 			pr_warn("Failed to allocate dispatch trace log for cpu %d\n",
 				cpu);
@@ -324,10 +330,27 @@ static int alloc_dispatch_logs(void)
 
 	return 0;
 }
-
-early_initcall(alloc_dispatch_logs);
+#else /* !CONFIG_VIRT_CPU_ACCOUNTING */
+static inline int alloc_dispatch_logs(void)
+{
+	return 0;
+}
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING */
 
+static int alloc_dispatch_log_kmem_cache(void)
+{
+	dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
+						DISPATCH_LOG_BYTES, 0, NULL);
+	if (!dtl_cache) {
+		pr_warn("Failed to create dispatch trace log buffer cache\n");
+		pr_warn("Stolen time statistics will be unreliable\n");
+		return 0;
+	}
+
+	return alloc_dispatch_logs();
+}
+early_initcall(alloc_dispatch_log_kmem_cache);
+
 static void __init pSeries_setup_arch(void)
 {
 	/* Discover PIC type and setup ppc_md accordingly */
@@ -378,7 +401,7 @@ static int __init pSeries_init_panel(void)
 
 	return 0;
 }
-arch_initcall(pSeries_init_panel);
+machine_arch_initcall(pseries, pSeries_init_panel);
 
 static int pseries_set_dabr(unsigned long dabr)
 {
@@ -395,6 +418,16 @@ static int pseries_set_xdabr(unsigned long dabr)
 #define CMO_CHARACTERISTICS_TOKEN 44
 #define CMO_MAXLENGTH 1026
 
+void pSeries_coalesce_init(void)
+{
+	struct hvcall_mpp_x_data mpp_x_data;
+
+	if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data))
+		powerpc_firmware_features |= FW_FEATURE_XCMO;
+	else
+		powerpc_firmware_features &= ~FW_FEATURE_XCMO;
+}
+
 /**
  * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
  * handle that here. (Stolen from parse_system_parameter_string)
@@ -464,6 +497,7 @@ void pSeries_cmo_feature_init(void)
 		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
 		         CMO_SecPSP);
 		powerpc_firmware_features |= FW_FEATURE_CMO;
+		pSeries_coalesce_init();
 	} else
 		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
 		         CMO_SecPSP);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 0317cce877c..fbffd7e47ab 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -44,10 +44,11 @@
 #include <asm/mpic.h>
 #include <asm/vdso_datapage.h>
 #include <asm/cputhreads.h>
+#include <asm/mpic.h>
+#include <asm/xics.h>
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
-#include "xics.h"
 #include "offline_states.h"
 
 
@@ -64,8 +65,8 @@ int smp_query_cpu_stopped(unsigned int pcpu)
 	int qcss_tok = rtas_token("query-cpu-stopped-state");
 
 	if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
-		printk(KERN_INFO "Firmware doesn't support "
-				"query-cpu-stopped-state\n");
+		printk_once(KERN_INFO
+			"Firmware doesn't support query-cpu-stopped-state\n");
 		return QCSS_HARDWARE_ERROR;
 	}
 
@@ -112,10 +113,10 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 
 	/* Fixup atomic count: it exited inside IRQ handler. */
 	task_thread_info(paca[lcpu].__current)->preempt_count	= 0;
-
+#ifdef CONFIG_HOTPLUG_CPU
 	if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
 		goto out;
-
+#endif
 	/* 
 	 * If the RTAS start-cpu token does not exist then presume the
 	 * cpu is already spinning.
@@ -130,11 +131,12 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 		return 0;
 	}
 
+#ifdef CONFIG_HOTPLUG_CPU
 out:
+#endif
 	return 1;
 }
 
-#ifdef CONFIG_XICS
 static void __devinit smp_xics_setup_cpu(int cpu)
 {
 	if (cpu != boot_cpuid)
@@ -144,20 +146,18 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 		vpa_init(cpu);
 
 	cpumask_clear_cpu(cpu, of_spin_mask);
+#ifdef CONFIG_HOTPLUG_CPU
 	set_cpu_current_state(cpu, CPU_STATE_ONLINE);
 	set_default_offline_state(cpu);
-
+#endif
 }
-#endif /* CONFIG_XICS */
 
-static void __devinit smp_pSeries_kick_cpu(int nr)
+static int __devinit smp_pSeries_kick_cpu(int nr)
 {
-	long rc;
-	unsigned long hcpuid;
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
 
 	if (!smp_startup_cpu(nr))
-		return;
+		return -ENOENT;
 
 	/*
 	 * The processor is currently spinning, waiting for the
@@ -165,16 +165,22 @@ static void __devinit smp_pSeries_kick_cpu(int nr)
 	 * the processor will continue on to secondary_start
 	 */
 	paca[nr].cpu_start = 1;
-
+#ifdef CONFIG_HOTPLUG_CPU
 	set_preferred_offline_state(nr, CPU_STATE_ONLINE);
 
 	if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
+		long rc;
+		unsigned long hcpuid;
+
 		hcpuid = get_hard_smp_processor_id(nr);
 		rc = plpar_hcall_norets(H_PROD, hcpuid);
 		if (rc != H_SUCCESS)
 			printk(KERN_ERR "Error: Prod to wake up processor %d "
 						"Ret= %ld\n", nr, rc);
 	}
+#endif
+
+	return 0;
 }
 
 static int smp_pSeries_cpu_bootable(unsigned int nr)
@@ -192,23 +198,22 @@ static int smp_pSeries_cpu_bootable(unsigned int nr)
 
 	return 1;
 }
-#ifdef CONFIG_MPIC
+
 static struct smp_ops_t pSeries_mpic_smp_ops = {
 	.message_pass	= smp_mpic_message_pass,
 	.probe		= smp_mpic_probe,
 	.kick_cpu	= smp_pSeries_kick_cpu,
 	.setup_cpu	= smp_mpic_setup_cpu,
 };
-#endif
-#ifdef CONFIG_XICS
+
 static struct smp_ops_t pSeries_xics_smp_ops = {
-	.message_pass	= smp_xics_message_pass,
-	.probe		= smp_xics_probe,
+	.message_pass	= smp_muxed_ipi_message_pass,
+	.cause_ipi	= NULL,	/* Filled at runtime by xics_smp_probe() */
+	.probe		= xics_smp_probe,
 	.kick_cpu	= smp_pSeries_kick_cpu,
 	.setup_cpu	= smp_xics_setup_cpu,
 	.cpu_bootable	= smp_pSeries_cpu_bootable,
 };
-#endif
 
 /* This is called very early */
 static void __init smp_init_pseries(void)
@@ -240,14 +245,12 @@ static void __init smp_init_pseries(void)
 	pr_debug(" <- smp_init_pSeries()\n");
 }
 
-#ifdef CONFIG_MPIC
 void __init smp_init_pseries_mpic(void)
 {
 	smp_ops = &pSeries_mpic_smp_ops;
 
 	smp_init_pseries();
 }
-#endif
 
 void __init smp_init_pseries_xics(void)
 {
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
deleted file mode 100644
index 6c1e638f0ce..00000000000
--- a/arch/powerpc/platforms/pseries/xics.c
+++ /dev/null
@@ -1,948 +0,0 @@
-/*
- * arch/powerpc/platforms/pseries/xics.c
- *
- * Copyright 2000 IBM Corporation.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/threads.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/radix-tree.h>
-#include <linux/cpu.h>
-#include <linux/msi.h>
-#include <linux/of.h>
-#include <linux/percpu.h>
-
-#include <asm/firmware.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/smp.h>
-#include <asm/rtas.h>
-#include <asm/hvcall.h>
-#include <asm/machdep.h>
-
-#include "xics.h"
-#include "plpar_wrappers.h"
-
-static struct irq_host *xics_host;
-
-#define XICS_IPI		2
-#define XICS_IRQ_SPURIOUS	0
-
-/* Want a priority other than 0.  Various HW issues require this. */
-#define	DEFAULT_PRIORITY	5
-
-/*
- * Mark IPIs as higher priority so we can take them inside interrupts that
- * arent marked IRQF_DISABLED
- */
-#define IPI_PRIORITY		4
-
-/* The least favored priority */
-#define LOWEST_PRIORITY		0xFF
-
-/* The number of priorities defined above */
-#define MAX_NUM_PRIORITIES	3
-
-static unsigned int default_server = 0xFF;
-static unsigned int default_distrib_server = 0;
-static unsigned int interrupt_server_size = 8;
-
-/* RTAS service tokens */
-static int ibm_get_xive;
-static int ibm_set_xive;
-static int ibm_int_on;
-static int ibm_int_off;
-
-struct xics_cppr {
-	unsigned char stack[MAX_NUM_PRIORITIES];
-	int index;
-};
-
-static DEFINE_PER_CPU(struct xics_cppr, xics_cppr);
-
-/* Direct hardware low level accessors */
-
-/* The part of the interrupt presentation layer that we care about */
-struct xics_ipl {
-	union {
-		u32 word;
-		u8 bytes[4];
-	} xirr_poll;
-	union {
-		u32 word;
-		u8 bytes[4];
-	} xirr;
-	u32 dummy;
-	union {
-		u32 word;
-		u8 bytes[4];
-	} qirr;
-};
-
-static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS];
-
-static inline unsigned int direct_xirr_info_get(void)
-{
-	int cpu = smp_processor_id();
-
-	return in_be32(&xics_per_cpu[cpu]->xirr.word);
-}
-
-static inline void direct_xirr_info_set(unsigned int value)
-{
-	int cpu = smp_processor_id();
-
-	out_be32(&xics_per_cpu[cpu]->xirr.word, value);
-}
-
-static inline void direct_cppr_info(u8 value)
-{
-	int cpu = smp_processor_id();
-
-	out_8(&xics_per_cpu[cpu]->xirr.bytes[0], value);
-}
-
-static inline void direct_qirr_info(int n_cpu, u8 value)
-{
-	out_8(&xics_per_cpu[n_cpu]->qirr.bytes[0], value);
-}
-
-
-/* LPAR low level accessors */
-
-static inline unsigned int lpar_xirr_info_get(unsigned char cppr)
-{
-	unsigned long lpar_rc;
-	unsigned long return_value;
-
-	lpar_rc = plpar_xirr(&return_value, cppr);
-	if (lpar_rc != H_SUCCESS)
-		panic(" bad return code xirr - rc = %lx\n", lpar_rc);
-	return (unsigned int)return_value;
-}
-
-static inline void lpar_xirr_info_set(unsigned int value)
-{
-	unsigned long lpar_rc;
-
-	lpar_rc = plpar_eoi(value);
-	if (lpar_rc != H_SUCCESS)
-		panic("bad return code EOI - rc = %ld, value=%x\n", lpar_rc,
-		      value);
-}
-
-static inline void lpar_cppr_info(u8 value)
-{
-	unsigned long lpar_rc;
-
-	lpar_rc = plpar_cppr(value);
-	if (lpar_rc != H_SUCCESS)
-		panic("bad return code cppr - rc = %lx\n", lpar_rc);
-}
-
-static inline void lpar_qirr_info(int n_cpu , u8 value)
-{
-	unsigned long lpar_rc;
-
-	lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value);
-	if (lpar_rc != H_SUCCESS)
-		panic("bad return code qirr - rc = %lx\n", lpar_rc);
-}
-
-
-/* Interface to generic irq subsystem */
-
-#ifdef CONFIG_SMP
-/*
- * For the moment we only implement delivery to all cpus or one cpu.
- *
- * If the requested affinity is cpu_all_mask, we set global affinity.
- * If not we set it to the first cpu in the mask, even if multiple cpus
- * are set. This is so things like irqbalance (which set core and package
- * wide affinities) do the right thing.
- */
-static int get_irq_server(unsigned int virq, const struct cpumask *cpumask,
-			  unsigned int strict_check)
-{
-
-	if (!distribute_irqs)
-		return default_server;
-
-	if (!cpumask_subset(cpu_possible_mask, cpumask)) {
-		int server = cpumask_first_and(cpu_online_mask, cpumask);
-
-		if (server < nr_cpu_ids)
-			return get_hard_smp_processor_id(server);
-
-		if (strict_check)
-			return -1;
-	}
-
-	/*
-	 * Workaround issue with some versions of JS20 firmware that
-	 * deliver interrupts to cpus which haven't been started. This
-	 * happens when using the maxcpus= boot option.
-	 */
-	if (cpumask_equal(cpu_online_mask, cpu_present_mask))
-		return default_distrib_server;
-
-	return default_server;
-}
-#else
-#define get_irq_server(virq, cpumask, strict_check) (default_server)
-#endif
-
-static void xics_unmask_irq(struct irq_data *d)
-{
-	unsigned int irq;
-	int call_status;
-	int server;
-
-	pr_devel("xics: unmask virq %d\n", d->irq);
-
-	irq = (unsigned int)irq_map[d->irq].hwirq;
-	pr_devel(" -> map to hwirq 0x%x\n", irq);
-	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
-		return;
-
-	server = get_irq_server(d->irq, d->affinity, 0);
-
-	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
-				DEFAULT_PRIORITY);
-	if (call_status != 0) {
-		printk(KERN_ERR
-			"%s: ibm_set_xive irq %u server %x returned %d\n",
-			__func__, irq, server, call_status);
-		return;
-	}
-
-	/* Now unmask the interrupt (often a no-op) */
-	call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq);
-	if (call_status != 0) {
-		printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
-			__func__, irq, call_status);
-		return;
-	}
-}
-
-static unsigned int xics_startup(struct irq_data *d)
-{
-	/*
-	 * The generic MSI code returns with the interrupt disabled on the
-	 * card, using the MSI mask bits. Firmware doesn't appear to unmask
-	 * at that level, so we do it here by hand.
-	 */
-	if (d->msi_desc)
-		unmask_msi_irq(d);
-
-	/* unmask it */
-	xics_unmask_irq(d);
-	return 0;
-}
-
-static void xics_mask_real_irq(struct irq_data *d)
-{
-	int call_status;
-
-	if (d->irq == XICS_IPI)
-		return;
-
-	call_status = rtas_call(ibm_int_off, 1, 1, NULL, d->irq);
-	if (call_status != 0) {
-		printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
-			__func__, d->irq, call_status);
-		return;
-	}
-
-	/* Have to set XIVE to 0xff to be able to remove a slot */
-	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, d->irq,
-				default_server, 0xff);
-	if (call_status != 0) {
-		printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
-			__func__, d->irq, call_status);
-		return;
-	}
-}
-
-static void xics_mask_irq(struct irq_data *d)
-{
-	unsigned int irq;
-
-	pr_devel("xics: mask virq %d\n", d->irq);
-
-	irq = (unsigned int)irq_map[d->irq].hwirq;
-	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
-		return;
-	xics_mask_real_irq(d);
-}
-
-static void xics_mask_unknown_vec(unsigned int vec)
-{
-	printk(KERN_ERR "Interrupt %u (real) is invalid, disabling it.\n", vec);
-	xics_mask_real_irq(irq_get_irq_data(vec));
-}
-
-static inline unsigned int xics_xirr_vector(unsigned int xirr)
-{
-	/*
-	 * The top byte is the old cppr, to be restored on EOI.
-	 * The remaining 24 bits are the vector.
-	 */
-	return xirr & 0x00ffffff;
-}
-
-static void push_cppr(unsigned int vec)
-{
-	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
-
-	if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1))
-		return;
-
-	if (vec == XICS_IPI)
-		os_cppr->stack[++os_cppr->index] = IPI_PRIORITY;
-	else
-		os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY;
-}
-
-static unsigned int xics_get_irq_direct(void)
-{
-	unsigned int xirr = direct_xirr_info_get();
-	unsigned int vec = xics_xirr_vector(xirr);
-	unsigned int irq;
-
-	if (vec == XICS_IRQ_SPURIOUS)
-		return NO_IRQ;
-
-	irq = irq_radix_revmap_lookup(xics_host, vec);
-	if (likely(irq != NO_IRQ)) {
-		push_cppr(vec);
-		return irq;
-	}
-
-	/* We don't have a linux mapping, so have rtas mask it. */
-	xics_mask_unknown_vec(vec);
-
-	/* We might learn about it later, so EOI it */
-	direct_xirr_info_set(xirr);
-	return NO_IRQ;
-}
-
-static unsigned int xics_get_irq_lpar(void)
-{
-	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
-	unsigned int xirr = lpar_xirr_info_get(os_cppr->stack[os_cppr->index]);
-	unsigned int vec = xics_xirr_vector(xirr);
-	unsigned int irq;
-
-	if (vec == XICS_IRQ_SPURIOUS)
-		return NO_IRQ;
-
-	irq = irq_radix_revmap_lookup(xics_host, vec);
-	if (likely(irq != NO_IRQ)) {
-		push_cppr(vec);
-		return irq;
-	}
-
-	/* We don't have a linux mapping, so have RTAS mask it. */
-	xics_mask_unknown_vec(vec);
-
-	/* We might learn about it later, so EOI it */
-	lpar_xirr_info_set(xirr);
-	return NO_IRQ;
-}
-
-static unsigned char pop_cppr(void)
-{
-	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
-
-	if (WARN_ON(os_cppr->index < 1))
-		return LOWEST_PRIORITY;
-
-	return os_cppr->stack[--os_cppr->index];
-}
-
-static void xics_eoi_direct(struct irq_data *d)
-{
-	unsigned int irq = (unsigned int)irq_map[d->irq].hwirq;
-
-	iosync();
-	direct_xirr_info_set((pop_cppr() << 24) | irq);
-}
-
-static void xics_eoi_lpar(struct irq_data *d)
-{
-	unsigned int irq = (unsigned int)irq_map[d->irq].hwirq;
-
-	iosync();
-	lpar_xirr_info_set((pop_cppr() << 24) | irq);
-}
-
-static int
-xics_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool force)
-{
-	unsigned int irq;
-	int status;
-	int xics_status[2];
-	int irq_server;
-
-	irq = (unsigned int)irq_map[d->irq].hwirq;
-	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
-		return -1;
-
-	status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
-
-	if (status) {
-		printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
-			__func__, irq, status);
-		return -1;
-	}
-
-	irq_server = get_irq_server(d->irq, cpumask, 1);
-	if (irq_server == -1) {
-		char cpulist[128];
-		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
-		printk(KERN_WARNING
-			"%s: No online cpus in the mask %s for irq %d\n",
-			__func__, cpulist, d->irq);
-		return -1;
-	}
-
-	status = rtas_call(ibm_set_xive, 3, 1, NULL,
-				irq, irq_server, xics_status[1]);
-
-	if (status) {
-		printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
-			__func__, irq, status);
-		return -1;
-	}
-
-	return 0;
-}
-
-static struct irq_chip xics_pic_direct = {
-	.name = "XICS",
-	.irq_startup = xics_startup,
-	.irq_mask = xics_mask_irq,
-	.irq_unmask = xics_unmask_irq,
-	.irq_eoi = xics_eoi_direct,
-	.irq_set_affinity = xics_set_affinity
-};
-
-static struct irq_chip xics_pic_lpar = {
-	.name = "XICS",
-	.irq_startup = xics_startup,
-	.irq_mask = xics_mask_irq,
-	.irq_unmask = xics_unmask_irq,
-	.irq_eoi = xics_eoi_lpar,
-	.irq_set_affinity = xics_set_affinity
-};
-
-
-/* Interface to arch irq controller subsystem layer */
-
-/* Points to the irq_chip we're actually using */
-static struct irq_chip *xics_irq_chip;
-
-static int xics_host_match(struct irq_host *h, struct device_node *node)
-{
-	/* IBM machines have interrupt parents of various funky types for things
-	 * like vdevices, events, etc... The trick we use here is to match
-	 * everything here except the legacy 8259 which is compatible "chrp,iic"
-	 */
-	return !of_device_is_compatible(node, "chrp,iic");
-}
-
-static int xics_host_map(struct irq_host *h, unsigned int virq,
-			 irq_hw_number_t hw)
-{
-	pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
-
-	/* Insert the interrupt mapping into the radix tree for fast lookup */
-	irq_radix_revmap_insert(xics_host, virq, hw);
-
-	irq_set_status_flags(virq, IRQ_LEVEL);
-	irq_set_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
-	return 0;
-}
-
-static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
-			   const u32 *intspec, unsigned int intsize,
-			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
-
-{
-	/* Current xics implementation translates everything
-	 * to level. It is not technically right for MSIs but this
-	 * is irrelevant at this point. We might get smarter in the future
-	 */
-	*out_hwirq = intspec[0];
-	*out_flags = IRQ_TYPE_LEVEL_LOW;
-
-	return 0;
-}
-
-static struct irq_host_ops xics_host_ops = {
-	.match = xics_host_match,
-	.map = xics_host_map,
-	.xlate = xics_host_xlate,
-};
-
-static void __init xics_init_host(void)
-{
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		xics_irq_chip = &xics_pic_lpar;
-	else
-		xics_irq_chip = &xics_pic_direct;
-
-	xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops,
-				   XICS_IRQ_SPURIOUS);
-	BUG_ON(xics_host == NULL);
-	irq_set_default_host(xics_host);
-}
-
-
-/* Inter-processor interrupt support */
-
-#ifdef CONFIG_SMP
-/*
- * XICS only has a single IPI, so encode the messages per CPU
- */
-static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message);
-
-static inline void smp_xics_do_message(int cpu, int msg)
-{
-	unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
-
-	set_bit(msg, tgt);
-	mb();
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		lpar_qirr_info(cpu, IPI_PRIORITY);
-	else
-		direct_qirr_info(cpu, IPI_PRIORITY);
-}
-
-void smp_xics_message_pass(int target, int msg)
-{
-	unsigned int i;
-
-	if (target < NR_CPUS) {
-		smp_xics_do_message(target, msg);
-	} else {
-		for_each_online_cpu(i) {
-			if (target == MSG_ALL_BUT_SELF
-			    && i == smp_processor_id())
-				continue;
-			smp_xics_do_message(i, msg);
-		}
-	}
-}
-
-static irqreturn_t xics_ipi_dispatch(int cpu)
-{
-	unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
-
-	mb();	/* order mmio clearing qirr */
-	while (*tgt) {
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, tgt)) {
-			smp_message_recv(PPC_MSG_CALL_FUNCTION);
-		}
-		if (test_and_clear_bit(PPC_MSG_RESCHEDULE, tgt)) {
-			smp_message_recv(PPC_MSG_RESCHEDULE);
-		}
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE, tgt)) {
-			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
-		}
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, tgt)) {
-			smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
-		}
-#endif
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id)
-{
-	int cpu = smp_processor_id();
-
-	direct_qirr_info(cpu, 0xff);
-
-	return xics_ipi_dispatch(cpu);
-}
-
-static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id)
-{
-	int cpu = smp_processor_id();
-
-	lpar_qirr_info(cpu, 0xff);
-
-	return xics_ipi_dispatch(cpu);
-}
-
-static void xics_request_ipi(void)
-{
-	unsigned int ipi;
-	int rc;
-
-	ipi = irq_create_mapping(xics_host, XICS_IPI);
-	BUG_ON(ipi == NO_IRQ);
-
-	/*
-	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	irq_set_handler(ipi, handle_percpu_irq);
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		rc = request_irq(ipi, xics_ipi_action_lpar,
-				IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
-	else
-		rc = request_irq(ipi, xics_ipi_action_direct,
-				IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
-	BUG_ON(rc);
-}
-
-int __init smp_xics_probe(void)
-{
-	xics_request_ipi();
-
-	return cpumask_weight(cpu_possible_mask);
-}
-
-#endif /* CONFIG_SMP */
-
-
-/* Initialization */
-
-static void xics_update_irq_servers(void)
-{
-	int i, j;
-	struct device_node *np;
-	u32 ilen;
-	const u32 *ireg;
-	u32 hcpuid;
-
-	/* Find the server numbers for the boot cpu. */
-	np = of_get_cpu_node(boot_cpuid, NULL);
-	BUG_ON(!np);
-
-	ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
-	if (!ireg) {
-		of_node_put(np);
-		return;
-	}
-
-	i = ilen / sizeof(int);
-	hcpuid = get_hard_smp_processor_id(boot_cpuid);
-
-	/* Global interrupt distribution server is specified in the last
-	 * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
-	 * entry fom this property for current boot cpu id and use it as
-	 * default distribution server
-	 */
-	for (j = 0; j < i; j += 2) {
-		if (ireg[j] == hcpuid) {
-			default_server = hcpuid;
-			default_distrib_server = ireg[j+1];
-		}
-	}
-
-	of_node_put(np);
-}
-
-static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
-				     unsigned long size)
-{
-	int i;
-
-	/* This may look gross but it's good enough for now, we don't quite
-	 * have a hard -> linux processor id matching.
-	 */
-	for_each_possible_cpu(i) {
-		if (!cpu_present(i))
-			continue;
-		if (hw_id == get_hard_smp_processor_id(i)) {
-			xics_per_cpu[i] = ioremap(addr, size);
-			return;
-		}
-	}
-}
-
-static void __init xics_init_one_node(struct device_node *np,
-				      unsigned int *indx)
-{
-	unsigned int ilen;
-	const u32 *ireg;
-
-	/* This code does the theorically broken assumption that the interrupt
-	 * server numbers are the same as the hard CPU numbers.
-	 * This happens to be the case so far but we are playing with fire...
-	 * should be fixed one of these days. -BenH.
-	 */
-	ireg = of_get_property(np, "ibm,interrupt-server-ranges", NULL);
-
-	/* Do that ever happen ? we'll know soon enough... but even good'old
-	 * f80 does have that property ..
-	 */
-	WARN_ON(ireg == NULL);
-	if (ireg) {
-		/*
-		 * set node starting index for this node
-		 */
-		*indx = *ireg;
-	}
-	ireg = of_get_property(np, "reg", &ilen);
-	if (!ireg)
-		panic("xics_init_IRQ: can't find interrupt reg property");
-
-	while (ilen >= (4 * sizeof(u32))) {
-		unsigned long addr, size;
-
-		/* XXX Use proper OF parsing code here !!! */
-		addr = (unsigned long)*ireg++ << 32;
-		ilen -= sizeof(u32);
-		addr |= *ireg++;
-		ilen -= sizeof(u32);
-		size = (unsigned long)*ireg++ << 32;
-		ilen -= sizeof(u32);
-		size |= *ireg++;
-		ilen -= sizeof(u32);
-		xics_map_one_cpu(*indx, addr, size);
-		(*indx)++;
-	}
-}
-
-void __init xics_init_IRQ(void)
-{
-	struct device_node *np;
-	u32 indx = 0;
-	int found = 0;
-	const u32 *isize;
-
-	ppc64_boot_msg(0x20, "XICS Init");
-
-	ibm_get_xive = rtas_token("ibm,get-xive");
-	ibm_set_xive = rtas_token("ibm,set-xive");
-	ibm_int_on  = rtas_token("ibm,int-on");
-	ibm_int_off = rtas_token("ibm,int-off");
-
-	for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") {
-		found = 1;
-		if (firmware_has_feature(FW_FEATURE_LPAR)) {
-			of_node_put(np);
-			break;
-			}
-		xics_init_one_node(np, &indx);
-	}
-	if (found == 0)
-		return;
-
-	/* get the bit size of server numbers */
-	found = 0;
-
-	for_each_compatible_node(np, NULL, "ibm,ppc-xics") {
-		isize = of_get_property(np, "ibm,interrupt-server#-size", NULL);
-
-		if (!isize)
-			continue;
-
-		if (!found) {
-			interrupt_server_size = *isize;
-			found = 1;
-		} else if (*isize != interrupt_server_size) {
-			printk(KERN_WARNING "XICS: "
-			       "mismatched ibm,interrupt-server#-size\n");
-			interrupt_server_size = max(*isize,
-						    interrupt_server_size);
-		}
-	}
-
-	xics_update_irq_servers();
-	xics_init_host();
-
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		ppc_md.get_irq = xics_get_irq_lpar;
-	else
-		ppc_md.get_irq = xics_get_irq_direct;
-
-	xics_setup_cpu();
-
-	ppc64_boot_msg(0x21, "XICS Done");
-}
-
-/* Cpu startup, shutdown, and hotplug */
-
-static void xics_set_cpu_priority(unsigned char cppr)
-{
-	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
-
-	/*
-	 * we only really want to set the priority when there's
-	 * just one cppr value on the stack
-	 */
-	WARN_ON(os_cppr->index != 0);
-
-	os_cppr->stack[0] = cppr;
-
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		lpar_cppr_info(cppr);
-	else
-		direct_cppr_info(cppr);
-	iosync();
-}
-
-/* Have the calling processor join or leave the specified global queue */
-static void xics_set_cpu_giq(unsigned int gserver, unsigned int join)
-{
-	int index;
-	int status;
-
-	if (!rtas_indicator_present(GLOBAL_INTERRUPT_QUEUE, NULL))
-		return;
-
-	index = (1UL << interrupt_server_size) - 1 - gserver;
-
-	status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, index, join);
-
-	WARN(status < 0, "set-indicator(%d, %d, %u) returned %d\n",
-	     GLOBAL_INTERRUPT_QUEUE, index, join, status);
-}
-
-void xics_setup_cpu(void)
-{
-	xics_set_cpu_priority(LOWEST_PRIORITY);
-
-	xics_set_cpu_giq(default_distrib_server, 1);
-}
-
-void xics_teardown_cpu(void)
-{
-	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
-	int cpu = smp_processor_id();
-
-	/*
-	 * we have to reset the cppr index to 0 because we're
-	 * not going to return from the IPI
-	 */
-	os_cppr->index = 0;
-	xics_set_cpu_priority(0);
-
-	/* Clear any pending IPI request */
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		lpar_qirr_info(cpu, 0xff);
-	else
-		direct_qirr_info(cpu, 0xff);
-}
-
-void xics_kexec_teardown_cpu(int secondary)
-{
-	xics_teardown_cpu();
-
-	/*
-	 * we take the ipi irq but and never return so we
-	 * need to EOI the IPI, but want to leave our priority 0
-	 *
-	 * should we check all the other interrupts too?
-	 * should we be flagging idle loop instead?
-	 * or creating some task to be scheduled?
-	 */
-
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		lpar_xirr_info_set((0x00 << 24) | XICS_IPI);
-	else
-		direct_xirr_info_set((0x00 << 24) | XICS_IPI);
-
-	/*
-	 * Some machines need to have at least one cpu in the GIQ,
-	 * so leave the master cpu in the group.
-	 */
-	if (secondary)
-		xics_set_cpu_giq(default_distrib_server, 0);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Interrupts are disabled. */
-void xics_migrate_irqs_away(void)
-{
-	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
-	unsigned int irq, virq;
-
-	/* If we used to be the default server, move to the new "boot_cpuid" */
-	if (hw_cpu == default_server)
-		xics_update_irq_servers();
-
-	/* Reject any interrupt that was queued to us... */
-	xics_set_cpu_priority(0);
-
-	/* Remove ourselves from the global interrupt queue */
-	xics_set_cpu_giq(default_distrib_server, 0);
-
-	/* Allow IPIs again... */
-	xics_set_cpu_priority(DEFAULT_PRIORITY);
-
-	for_each_irq(virq) {
-		struct irq_desc *desc;
-		struct irq_chip *chip;
-		int xics_status[2];
-		int status;
-		unsigned long flags;
-
-		/* We cant set affinity on ISA interrupts */
-		if (virq < NUM_ISA_INTERRUPTS)
-			continue;
-		if (irq_map[virq].host != xics_host)
-			continue;
-		irq = (unsigned int)irq_map[virq].hwirq;
-		/* We need to get IPIs still. */
-		if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
-			continue;
-
-		desc = irq_to_desc(virq);
-
-		/* We only need to migrate enabled IRQS */
-		if (desc == NULL || desc->action == NULL)
-			continue;
-
-		chip = irq_desc_get_chip(desc);
-		if (chip == NULL || chip->irq_set_affinity == NULL)
-			continue;
-
-		raw_spin_lock_irqsave(&desc->lock, flags);
-
-		status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
-		if (status) {
-			printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
-					__func__, irq, status);
-			goto unlock;
-		}
-
-		/*
-		 * We only support delivery to all cpus or to one cpu.
-		 * The irq has to be migrated only in the single cpu
-		 * case.
-		 */
-		if (xics_status[0] != hw_cpu)
-			goto unlock;
-
-		/* This is expected during cpu offline. */
-		if (cpu_online(cpu))
-			printk(KERN_WARNING "IRQ %u affinity broken off cpu %u\n",
-			       virq, cpu);
-
-		/* Reset affinity to all cpus */
-		cpumask_setall(desc->irq_data.affinity);
-		chip->irq_set_affinity(&desc->irq_data, cpu_all_mask, true);
-unlock:
-		raw_spin_unlock_irqrestore(&desc->lock, flags);
-	}
-}
-#endif
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
deleted file mode 100644
index d1d5a83039a..00000000000
--- a/arch/powerpc/platforms/pseries/xics.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/powerpc/platforms/pseries/xics.h
- *
- * Copyright 2000 IBM Corporation.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#ifndef _POWERPC_KERNEL_XICS_H
-#define _POWERPC_KERNEL_XICS_H
-
-extern void xics_init_IRQ(void);
-extern void xics_setup_cpu(void);
-extern void xics_teardown_cpu(void);
-extern void xics_kexec_teardown_cpu(int secondary);
-extern void xics_migrate_irqs_away(void);
-extern int smp_xics_probe(void);
-extern void smp_xics_message_pass(int target, int msg);
-
-#endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
new file mode 100644
index 00000000000..c3c48eb62cc
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/Kconfig
@@ -0,0 +1,28 @@
+config PPC_WSP
+	bool
+	default n
+
+menu "WSP platform selection"
+	depends on PPC_BOOK3E_64
+
+config PPC_PSR2
+	bool "PSR-2 platform"
+	select PPC_A2
+	select GENERIC_TBSYNC
+	select PPC_SCOM
+	select EPAPR_BOOT
+	select PPC_WSP
+	select PPC_XICS
+	select PPC_ICP_NATIVE
+	default y
+
+endmenu
+
+config PPC_A2_DD2
+	bool "Support for DD2 based A2/WSP systems"
+	depends on PPC_A2
+
+config WORKAROUND_ERRATUM_463
+	depends on PPC_A2_DD2
+	bool "Workaround erratum 463"
+	default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
new file mode 100644
index 00000000000..095be73d6cd
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/Makefile
@@ -0,0 +1,6 @@
+ccflags-y			+= -mno-minimal-toc
+
+obj-y				+= setup.o ics.o
+obj-$(CONFIG_PPC_PSR2)		+= psr2.o opb_pic.o
+obj-$(CONFIG_PPC_WSP)		+= scom_wsp.o
+obj-$(CONFIG_SMP)		+= smp.o scom_smp.o
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
new file mode 100644
index 00000000000..e53bd9e7b12
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/ics.c
@@ -0,0 +1,712 @@
+/*
+ * Copyright 2008-2011 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/xics.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+
+/* WSP ICS */
+
+struct wsp_ics {
+	struct ics ics;
+	struct device_node *dn;
+	void __iomem *regs;
+	spinlock_t lock;
+	unsigned long *bitmap;
+	u32 chip_id;
+	u32 lsi_base;
+	u32 lsi_count;
+	u64 hwirq_start;
+	u64 count;
+#ifdef CONFIG_SMP
+	int *hwirq_cpu_map;
+#endif
+};
+
+#define to_wsp_ics(ics)	container_of(ics, struct wsp_ics, ics)
+
+#define INT_SRC_LAYER_BUID_REG(base)	((base) + 0x00)
+#define IODA_TBL_ADDR_REG(base)		((base) + 0x18)
+#define IODA_TBL_DATA_REG(base)		((base) + 0x20)
+#define XIVE_UPDATE_REG(base)		((base) + 0x28)
+#define ICS_INT_CAPS_REG(base)		((base) + 0x30)
+
+#define TBL_AUTO_INCREMENT	((1UL << 63) | (1UL << 15))
+#define TBL_SELECT_XIST		(1UL << 48)
+#define TBL_SELECT_XIVT		(1UL << 49)
+
+#define IODA_IRQ(irq)		((irq) & (0x7FFULL))	/* HRM 5.1.3.4 */
+
+#define XIST_REQUIRED		0x8
+#define XIST_REJECTED		0x4
+#define XIST_PRESENTED		0x2
+#define XIST_PENDING		0x1
+
+#define XIVE_SERVER_SHIFT	42
+#define XIVE_SERVER_MASK	0xFFFFULL
+#define XIVE_PRIORITY_MASK	0xFFULL
+#define XIVE_PRIORITY_SHIFT	32
+#define XIVE_WRITE_ENABLE	(1ULL << 63)
+
+/*
+ * The docs refer to a 6 bit field called ChipID, which consists of a
+ * 3 bit NodeID and a 3 bit ChipID. On WSP the ChipID is always zero
+ * so we ignore it, and every where we use "chip id" in this code we
+ * mean the NodeID.
+ */
+#define WSP_ICS_CHIP_SHIFT		17
+
+
+static struct wsp_ics *ics_list;
+static int num_ics;
+
+/* ICS Source controller accessors */
+
+static u64 wsp_ics_get_xive(struct wsp_ics *ics, unsigned int irq)
+{
+	unsigned long flags;
+	u64 xive;
+
+	spin_lock_irqsave(&ics->lock, flags);
+	out_be64(IODA_TBL_ADDR_REG(ics->regs), TBL_SELECT_XIVT | IODA_IRQ(irq));
+	xive = in_be64(IODA_TBL_DATA_REG(ics->regs));
+	spin_unlock_irqrestore(&ics->lock, flags);
+
+	return xive;
+}
+
+static void wsp_ics_set_xive(struct wsp_ics *ics, unsigned int irq, u64 xive)
+{
+	xive &= ~XIVE_ADDR_MASK;
+	xive |= (irq & XIVE_ADDR_MASK);
+	xive |= XIVE_WRITE_ENABLE;
+
+	out_be64(XIVE_UPDATE_REG(ics->regs), xive);
+}
+
+static u64 xive_set_server(u64 xive, unsigned int server)
+{
+	u64 mask = ~(XIVE_SERVER_MASK << XIVE_SERVER_SHIFT);
+
+	xive &= mask;
+	xive |= (server & XIVE_SERVER_MASK) << XIVE_SERVER_SHIFT;
+
+	return xive;
+}
+
+static u64 xive_set_priority(u64 xive, unsigned int priority)
+{
+	u64 mask = ~(XIVE_PRIORITY_MASK << XIVE_PRIORITY_SHIFT);
+
+	xive &= mask;
+	xive |= (priority & XIVE_PRIORITY_MASK) << XIVE_PRIORITY_SHIFT;
+
+	return xive;
+}
+
+
+#ifdef CONFIG_SMP
+/* Find logical CPUs within mask on a given chip and store result in ret */
+void cpus_on_chip(int chip_id, cpumask_t *mask, cpumask_t *ret)
+{
+	int cpu, chip;
+	struct device_node *cpu_dn, *dn;
+	const u32 *prop;
+
+	cpumask_clear(ret);
+	for_each_cpu(cpu, mask) {
+		cpu_dn = of_get_cpu_node(cpu, NULL);
+		if (!cpu_dn)
+			continue;
+
+		prop = of_get_property(cpu_dn, "at-node", NULL);
+		if (!prop) {
+			of_node_put(cpu_dn);
+			continue;
+		}
+
+		dn = of_find_node_by_phandle(*prop);
+		of_node_put(cpu_dn);
+
+		chip = wsp_get_chip_id(dn);
+		if (chip == chip_id)
+			cpumask_set_cpu(cpu, ret);
+
+		of_node_put(dn);
+	}
+}
+
+/* Store a suitable CPU to handle a hwirq in the ics->hwirq_cpu_map cache */
+static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
+			   const cpumask_t *affinity)
+{
+	cpumask_var_t avail, newmask;
+	int ret = -ENOMEM, cpu, cpu_rover = 0, target;
+	int index = hwirq - ics->hwirq_start;
+	unsigned int nodeid;
+
+	BUG_ON(index < 0 || index >= ics->count);
+
+	if (!ics->hwirq_cpu_map)
+		return -ENOMEM;
+
+	if (!distribute_irqs) {
+		ics->hwirq_cpu_map[hwirq - ics->hwirq_start] = xics_default_server;
+		return 0;
+	}
+
+	/* Allocate needed CPU masks */
+	if (!alloc_cpumask_var(&avail, GFP_KERNEL))
+		goto ret;
+	if (!alloc_cpumask_var(&newmask, GFP_KERNEL))
+		goto freeavail;
+
+	/* Find PBus attached to the source of this IRQ */
+	nodeid = (hwirq >> WSP_ICS_CHIP_SHIFT) & 0x3; /* 12:14 */
+
+	/* Find CPUs that could handle this IRQ */
+	if (affinity)
+		cpumask_and(avail, cpu_online_mask, affinity);
+	else
+		cpumask_copy(avail, cpu_online_mask);
+
+	/* Narrow selection down to logical CPUs on the same chip */
+	cpus_on_chip(nodeid, avail, newmask);
+
+	/* Ensure we haven't narrowed it down to 0 */
+	if (unlikely(cpumask_empty(newmask))) {
+		if (unlikely(cpumask_empty(avail))) {
+			ret = -1;
+			goto out;
+		}
+		cpumask_copy(newmask, avail);
+	}
+
+	/* Choose a CPU out of those we narrowed it down to in round robin */
+	target = hwirq % cpumask_weight(newmask);
+	for_each_cpu(cpu, newmask) {
+		if (cpu_rover++ >= target) {
+			ics->hwirq_cpu_map[index] = get_hard_smp_processor_id(cpu);
+			ret = 0;
+			goto out;
+		}
+	}
+
+	/* Shouldn't happen */
+	WARN_ON(1);
+
+out:
+	free_cpumask_var(newmask);
+freeavail:
+	free_cpumask_var(avail);
+ret:
+	if (ret < 0) {
+		ics->hwirq_cpu_map[index] = cpumask_first(cpu_online_mask);
+		pr_warning("Error, falling hwirq 0x%x routing back to CPU %i\n",
+			   hwirq, ics->hwirq_cpu_map[index]);
+	}
+	return ret;
+}
+
+static void alloc_irq_map(struct wsp_ics *ics)
+{
+	int i;
+
+	ics->hwirq_cpu_map = kmalloc(sizeof(int) * ics->count, GFP_KERNEL);
+	if (!ics->hwirq_cpu_map) {
+		pr_warning("Allocate hwirq_cpu_map failed, "
+			   "IRQ balancing disabled\n");
+		return;
+	}
+
+	for (i=0; i < ics->count; i++)
+		ics->hwirq_cpu_map[i] = xics_default_server;
+}
+
+static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
+{
+	int index = hwirq - ics->hwirq_start;
+
+	BUG_ON(index < 0 || index >= ics->count);
+
+	if (!ics->hwirq_cpu_map)
+		return xics_default_server;
+
+	return ics->hwirq_cpu_map[index];
+}
+#else /* !CONFIG_SMP */
+static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
+			   const cpumask_t *affinity)
+{
+	return 0;
+}
+
+static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
+{
+	return xics_default_server;
+}
+
+static void alloc_irq_map(struct wsp_ics *ics) { }
+#endif
+
+static void wsp_chip_unmask_irq(struct irq_data *d)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	struct wsp_ics *ics;
+	int server;
+	u64 xive;
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return;
+
+	ics = d->chip_data;
+	if (WARN_ON(!ics))
+		return;
+
+	server = get_irq_server(ics, hw_irq);
+
+	xive = wsp_ics_get_xive(ics, hw_irq);
+	xive = xive_set_server(xive, server);
+	xive = xive_set_priority(xive, DEFAULT_PRIORITY);
+	wsp_ics_set_xive(ics, hw_irq, xive);
+}
+
+static unsigned int wsp_chip_startup(struct irq_data *d)
+{
+	/* unmask it */
+	wsp_chip_unmask_irq(d);
+	return 0;
+}
+
+static void wsp_mask_real_irq(unsigned int hw_irq, struct wsp_ics *ics)
+{
+	u64 xive;
+
+	if (hw_irq == XICS_IPI)
+		return;
+
+	if (WARN_ON(!ics))
+		return;
+	xive = wsp_ics_get_xive(ics, hw_irq);
+	xive = xive_set_server(xive, xics_default_server);
+	xive = xive_set_priority(xive, LOWEST_PRIORITY);
+	wsp_ics_set_xive(ics, hw_irq, xive);
+}
+
+static void wsp_chip_mask_irq(struct irq_data *d)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	struct wsp_ics *ics = d->chip_data;
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return;
+
+	wsp_mask_real_irq(hw_irq, ics);
+}
+
+static int wsp_chip_set_affinity(struct irq_data *d,
+				 const struct cpumask *cpumask, bool force)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	struct wsp_ics *ics;
+	int ret;
+	u64 xive;
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return -1;
+
+	ics = d->chip_data;
+	if (WARN_ON(!ics))
+		return -1;
+	xive = wsp_ics_get_xive(ics, hw_irq);
+
+	/*
+	 * For the moment only implement delivery to all cpus or one cpu.
+	 * Get current irq_server for the given irq
+	 */
+	ret = cache_hwirq_map(ics, d->irq, cpumask);
+	if (ret == -1) {
+		char cpulist[128];
+		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
+		pr_warning("%s: No online cpus in the mask %s for irq %d\n",
+			   __func__, cpulist, d->irq);
+		return -1;
+	} else if (ret == -ENOMEM) {
+		pr_warning("%s: Out of memory\n", __func__);
+		return -1;
+	}
+
+	xive = xive_set_server(xive, get_irq_server(ics, hw_irq));
+	wsp_ics_set_xive(ics, hw_irq, xive);
+
+	return 0;
+}
+
+static struct irq_chip wsp_irq_chip = {
+	.name = "WSP ICS",
+	.irq_startup		= wsp_chip_startup,
+	.irq_mask		= wsp_chip_mask_irq,
+	.irq_unmask		= wsp_chip_unmask_irq,
+	.irq_set_affinity	= wsp_chip_set_affinity
+};
+
+static int wsp_ics_host_match(struct ics *ics, struct device_node *dn)
+{
+	/* All ICSs in the system implement a global irq number space,
+	 * so match against them all. */
+	return of_device_is_compatible(dn, "ibm,ppc-xics");
+}
+
+static int wsp_ics_match_hwirq(struct wsp_ics *wsp_ics, unsigned int hwirq)
+{
+	if (hwirq >= wsp_ics->hwirq_start &&
+	    hwirq <  wsp_ics->hwirq_start + wsp_ics->count)
+		return 1;
+
+	return 0;
+}
+
+static int wsp_ics_map(struct ics *ics, unsigned int virq)
+{
+	struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+	unsigned int hw_irq = virq_to_hw(virq);
+	unsigned long flags;
+
+	if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+		return -ENOENT;
+
+	irq_set_chip_and_handler(virq, &wsp_irq_chip, handle_fasteoi_irq);
+
+	irq_set_chip_data(virq, wsp_ics);
+
+	spin_lock_irqsave(&wsp_ics->lock, flags);
+	bitmap_allocate_region(wsp_ics->bitmap, hw_irq - wsp_ics->hwirq_start, 0);
+	spin_unlock_irqrestore(&wsp_ics->lock, flags);
+
+	return 0;
+}
+
+static void wsp_ics_mask_unknown(struct ics *ics, unsigned long hw_irq)
+{
+	struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+
+	if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+		return;
+
+	pr_err("%s: IRQ %lu (real) is invalid, disabling it.\n", __func__, hw_irq);
+	wsp_mask_real_irq(hw_irq, wsp_ics);
+}
+
+static long wsp_ics_get_server(struct ics *ics, unsigned long hw_irq)
+{
+	struct wsp_ics *wsp_ics = to_wsp_ics(ics);
+
+	if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
+		return -ENOENT;
+
+	return get_irq_server(wsp_ics, hw_irq);
+}
+
+/* HW Number allocation API */
+
+static struct wsp_ics *wsp_ics_find_dn_ics(struct device_node *dn)
+{
+	struct device_node *iparent;
+	int i;
+
+	iparent = of_irq_find_parent(dn);
+	if (!iparent) {
+		pr_err("wsp_ics: Failed to find interrupt parent!\n");
+		return NULL;
+	}
+
+	for(i = 0; i < num_ics; i++) {
+		if(ics_list[i].dn == iparent)
+			break;
+	}
+
+	if (i >= num_ics) {
+		pr_err("wsp_ics: Unable to find parent bitmap!\n");
+		return NULL;
+	}
+
+	return &ics_list[i];
+}
+
+int wsp_ics_alloc_irq(struct device_node *dn, int num)
+{
+	struct wsp_ics *ics;
+	int order, offset;
+
+	ics = wsp_ics_find_dn_ics(dn);
+	if (!ics)
+		return -ENODEV;
+
+	/* Fast, but overly strict if num isn't a power of two */
+	order = get_count_order(num);
+
+	spin_lock_irq(&ics->lock);
+	offset = bitmap_find_free_region(ics->bitmap, ics->count, order);
+	spin_unlock_irq(&ics->lock);
+
+	if (offset < 0)
+		return offset;
+
+	return offset + ics->hwirq_start;
+}
+
+void wsp_ics_free_irq(struct device_node *dn, unsigned int irq)
+{
+	struct wsp_ics *ics;
+
+	ics = wsp_ics_find_dn_ics(dn);
+	if (WARN_ON(!ics))
+		return;
+
+	spin_lock_irq(&ics->lock);
+	bitmap_release_region(ics->bitmap, irq, 0);
+	spin_unlock_irq(&ics->lock);
+}
+
+/* Initialisation */
+
+static int __init wsp_ics_bitmap_setup(struct wsp_ics *ics,
+				      struct device_node *dn)
+{
+	int len, i, j, size;
+	u32 start, count;
+	const u32 *p;
+
+	size = BITS_TO_LONGS(ics->count) * sizeof(long);
+	ics->bitmap = kzalloc(size, GFP_KERNEL);
+	if (!ics->bitmap) {
+		pr_err("wsp_ics: ENOMEM allocating IRQ bitmap!\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&ics->lock);
+
+	p = of_get_property(dn, "available-ranges", &len);
+	if (!p || !len) {
+		/* FIXME this should be a WARN() once mambo is updated */
+		pr_err("wsp_ics: No available-ranges defined for %s\n",
+			dn->full_name);
+		return 0;
+	}
+
+	if (len % (2 * sizeof(u32)) != 0) {
+		/* FIXME this should be a WARN() once mambo is updated */
+		pr_err("wsp_ics: Invalid available-ranges for %s\n",
+			dn->full_name);
+		return 0;
+	}
+
+	bitmap_fill(ics->bitmap, ics->count);
+
+	for (i = 0; i < len / sizeof(u32); i += 2) {
+		start = of_read_number(p + i, 1);
+		count = of_read_number(p + i + 1, 1);
+
+		pr_devel("%s: start: %d count: %d\n", __func__, start, count);
+
+		if ((start + count) > (ics->hwirq_start + ics->count) ||
+		     start < ics->hwirq_start) {
+			pr_err("wsp_ics: Invalid range! -> %d to %d\n",
+					start, start + count);
+			break;
+		}
+
+		for (j = 0; j < count; j++)
+			bitmap_release_region(ics->bitmap,
+				(start + j) - ics->hwirq_start, 0);
+	}
+
+	/* Ensure LSIs are not available for allocation */
+	bitmap_allocate_region(ics->bitmap, ics->lsi_base,
+			       get_count_order(ics->lsi_count));
+
+	return 0;
+}
+
+static int __init wsp_ics_setup(struct wsp_ics *ics, struct device_node *dn)
+{
+	u32 lsi_buid, msi_buid, msi_base, msi_count;
+	void __iomem *regs;
+	const u32 *p;
+	int rc, len, i;
+	u64 caps, buid;
+
+	p = of_get_property(dn, "interrupt-ranges", &len);
+	if (!p || len < (2 * sizeof(u32))) {
+		pr_err("wsp_ics: No/bad interrupt-ranges found on %s\n",
+			dn->full_name);
+		return -ENOENT;
+	}
+
+	if (len > (2 * sizeof(u32))) {
+		pr_err("wsp_ics: Multiple ics ranges not supported.\n");
+		return -EINVAL;
+	}
+
+	regs = of_iomap(dn, 0);
+	if (!regs) {
+		pr_err("wsp_ics: of_iomap(%s) failed\n", dn->full_name);
+		return -ENXIO;
+	}
+
+	ics->hwirq_start = of_read_number(p, 1);
+	ics->count = of_read_number(p + 1, 1);
+	ics->regs = regs;
+
+	ics->chip_id = wsp_get_chip_id(dn);
+	if (WARN_ON(ics->chip_id < 0))
+		ics->chip_id = 0;
+
+	/* Get some informations about the critter */
+	caps = in_be64(ICS_INT_CAPS_REG(ics->regs));
+	buid = in_be64(INT_SRC_LAYER_BUID_REG(ics->regs));
+	ics->lsi_count = caps >> 56;
+	msi_count = (caps >> 44) & 0x7ff;
+
+	/* Note: LSI BUID is 9 bits, but really only 3 are BUID and the
+	 * rest is mixed in the interrupt number. We store the whole
+	 * thing though
+	 */
+	lsi_buid = (buid >> 48) & 0x1ff;
+	ics->lsi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | lsi_buid << 5;
+	msi_buid = (buid >> 37) & 0x7;
+	msi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | msi_buid << 11;
+
+	pr_info("wsp_ics: Found %s\n", dn->full_name);
+	pr_info("wsp_ics:    irq range : 0x%06llx..0x%06llx\n",
+		ics->hwirq_start, ics->hwirq_start + ics->count - 1);
+	pr_info("wsp_ics:    %4d LSIs : 0x%06x..0x%06x\n",
+		ics->lsi_count, ics->lsi_base,
+		ics->lsi_base + ics->lsi_count - 1);
+	pr_info("wsp_ics:    %4d MSIs : 0x%06x..0x%06x\n",
+		msi_count, msi_base,
+		msi_base + msi_count - 1);
+
+	/* Let's check the HW config is sane */
+	if (ics->lsi_base < ics->hwirq_start ||
+	    (ics->lsi_base + ics->lsi_count) > (ics->hwirq_start + ics->count))
+		pr_warning("wsp_ics: WARNING ! LSIs out of interrupt-ranges !\n");
+	if (msi_base < ics->hwirq_start ||
+	    (msi_base + msi_count) > (ics->hwirq_start + ics->count))
+		pr_warning("wsp_ics: WARNING ! MSIs out of interrupt-ranges !\n");
+
+	/* We don't check for overlap between LSI and MSI, which will happen
+	 * if we use the same BUID, I'm not sure yet how legit that is.
+	 */
+
+	rc = wsp_ics_bitmap_setup(ics, dn);
+	if (rc) {
+		iounmap(regs);
+		return rc;
+	}
+
+	ics->dn = of_node_get(dn);
+	alloc_irq_map(ics);
+
+	for(i = 0; i < ics->count; i++)
+		wsp_mask_real_irq(ics->hwirq_start + i, ics);
+
+	ics->ics.map = wsp_ics_map;
+	ics->ics.mask_unknown = wsp_ics_mask_unknown;
+	ics->ics.get_server = wsp_ics_get_server;
+	ics->ics.host_match = wsp_ics_host_match;
+
+	xics_register_ics(&ics->ics);
+
+	return 0;
+}
+
+static void __init wsp_ics_set_default_server(void)
+{
+	struct device_node *np;
+	u32 hwid;
+
+	/* Find the server number for the boot cpu. */
+	np = of_get_cpu_node(boot_cpuid, NULL);
+	BUG_ON(!np);
+
+	hwid = get_hard_smp_processor_id(boot_cpuid);
+
+	pr_info("wsp_ics: default server is %#x, CPU %s\n", hwid, np->full_name);
+	xics_default_server = hwid;
+
+	of_node_put(np);
+}
+
+static int __init wsp_ics_init(void)
+{
+	struct device_node *dn;
+	struct wsp_ics *ics;
+	int rc, found;
+
+	wsp_ics_set_default_server();
+
+	found = 0;
+	for_each_compatible_node(dn, NULL, "ibm,ppc-xics")
+		found++;
+
+	if (found == 0) {
+		pr_err("wsp_ics: No ICS's found!\n");
+		return -ENODEV;
+	}
+
+	ics_list = kmalloc(sizeof(*ics) * found, GFP_KERNEL);
+	if (!ics_list) {
+		pr_err("wsp_ics: No memory for structs.\n");
+		return -ENOMEM;
+	}
+
+	num_ics = 0;
+	ics = ics_list;
+	for_each_compatible_node(dn, NULL, "ibm,wsp-xics") {
+		rc = wsp_ics_setup(ics, dn);
+		if (rc == 0) {
+			ics++;
+			num_ics++;
+		}
+	}
+
+	if (found != num_ics) {
+		pr_err("wsp_ics: Failed setting up %d ICS's\n",
+			found - num_ics);
+		return -1;
+	}
+
+	return 0;
+}
+
+void __init wsp_init_irq(void)
+{
+	wsp_ics_init();
+	xics_init();
+
+	/* We need to patch our irq chip's EOI to point to the right ICP */
+	wsp_irq_chip.irq_eoi = icp_ops->eoi;
+}
diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h
new file mode 100644
index 00000000000..e34d5310264
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/ics.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2009 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ICS_H
+#define __ICS_H
+
+#define XIVE_ADDR_MASK		0x7FFULL
+
+extern void wsp_init_irq(void);
+
+extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
+extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
+
+#endif /* __ICS_H */
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
new file mode 100644
index 00000000000..be05631a3c1
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/opb_pic.c
@@ -0,0 +1,332 @@
+/*
+ * IBM Onboard Peripheral Bus Interrupt Controller
+ *
+ * Copyright 2010 Jack Miller, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#include <asm/reg_a2.h>
+#include <asm/irq.h>
+
+#define OPB_NR_IRQS 32
+
+#define OPB_MLSASIER	0x04    /* MLS Accumulated Status IER */
+#define OPB_MLSIR	0x50	/* MLS Interrupt Register */
+#define OPB_MLSIER	0x54	/* MLS Interrupt Enable Register */
+#define OPB_MLSIPR	0x58	/* MLS Interrupt Polarity Register */
+#define OPB_MLSIIR	0x5c	/* MLS Interrupt Inputs Register */
+
+static int opb_index = 0;
+
+struct opb_pic {
+	struct irq_host *host;
+	void *regs;
+	int index;
+	spinlock_t lock;
+};
+
+static u32 opb_in(struct opb_pic *opb, int offset)
+{
+	return in_be32(opb->regs + offset);
+}
+
+static void opb_out(struct opb_pic *opb, int offset, u32 val)
+{
+	out_be32(opb->regs + offset, val);
+}
+
+static void opb_unmask_irq(struct irq_data *d)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	u32 ier, bitset;
+
+	opb = d->chip_data;
+	bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	ier = opb_in(opb, OPB_MLSIER);
+	opb_out(opb, OPB_MLSIER, ier | bitset);
+	ier = opb_in(opb, OPB_MLSIER);
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_mask_irq(struct irq_data *d)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	u32 ier, mask;
+
+	opb = d->chip_data;
+	mask = ~(1 << (31 - irqd_to_hwirq(d)));
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	ier = opb_in(opb, OPB_MLSIER);
+	opb_out(opb, OPB_MLSIER, ier & mask);
+	ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_ack_irq(struct irq_data *d)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	u32 bitset;
+
+	opb = d->chip_data;
+	bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	opb_out(opb, OPB_MLSIR, bitset);
+	opb_in(opb, OPB_MLSIR); // Flush posted writes
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static void opb_mask_ack_irq(struct irq_data *d)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	u32 bitset;
+	u32 ier, ir;
+
+	opb = d->chip_data;
+	bitset = (1 << (31 - irqd_to_hwirq(d)));
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	ier = opb_in(opb, OPB_MLSIER);
+	opb_out(opb, OPB_MLSIER, ier & ~bitset);
+	ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
+
+	opb_out(opb, OPB_MLSIR, bitset);
+	ir = opb_in(opb, OPB_MLSIR); // Flush posted writes
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+}
+
+static int opb_set_irq_type(struct irq_data *d, unsigned int flow)
+{
+	struct opb_pic *opb;
+	unsigned long flags;
+	int invert, ipr, mask, bit;
+
+	opb = d->chip_data;
+
+	/* The only information we're interested in in the type is whether it's
+	 * a high or low trigger. For high triggered interrupts, the polarity
+	 * set for it in the MLS Interrupt Polarity Register is 0, for low
+	 * interrupts it's 1 so that the proper input in the MLS Interrupt Input
+	 * Register is interrupted as asserting the interrupt. */
+
+	switch (flow) {
+		case IRQ_TYPE_NONE:
+			opb_mask_irq(d);
+			return 0;
+
+		case IRQ_TYPE_LEVEL_HIGH:
+			invert = 0;
+			break;
+
+		case IRQ_TYPE_LEVEL_LOW:
+			invert = 1;
+			break;
+
+		default:
+			return -EINVAL;
+	}
+
+	bit = (1 << (31 - irqd_to_hwirq(d)));
+	mask = ~bit;
+
+	spin_lock_irqsave(&opb->lock, flags);
+
+	ipr = opb_in(opb, OPB_MLSIPR);
+	ipr = (ipr & mask) | (invert ? bit : 0);
+	opb_out(opb, OPB_MLSIPR, ipr);
+	ipr = opb_in(opb, OPB_MLSIPR);  // Flush posted writes
+
+	spin_unlock_irqrestore(&opb->lock, flags);
+
+	/* Record the type in the interrupt descriptor */
+	irqd_set_trigger_type(d, flow);
+
+	return 0;
+}
+
+static struct irq_chip opb_irq_chip = {
+	.name		= "OPB",
+	.irq_mask	= opb_mask_irq,
+	.irq_unmask	= opb_unmask_irq,
+	.irq_mask_ack	= opb_mask_ack_irq,
+	.irq_ack	= opb_ack_irq,
+	.irq_set_type	= opb_set_irq_type
+};
+
+static int opb_host_map(struct irq_host *host, unsigned int virq,
+		irq_hw_number_t hwirq)
+{
+	struct opb_pic *opb;
+
+	opb = host->host_data;
+
+	/* Most of the important stuff is handled by the generic host code, like
+	 * the lookup, so just attach some info to the virtual irq */
+
+	irq_set_chip_data(virq, opb);
+	irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq);
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int opb_host_xlate(struct irq_host *host, struct device_node *dn,
+		const u32 *intspec, unsigned int intsize,
+		irq_hw_number_t *out_hwirq, unsigned int *out_type)
+{
+	/* Interrupt size must == 2 */
+	BUG_ON(intsize != 2);
+	*out_hwirq = intspec[0];
+	*out_type = intspec[1];
+	return 0;
+}
+
+static struct irq_host_ops opb_host_ops = {
+	.map = opb_host_map,
+	.xlate = opb_host_xlate,
+};
+
+irqreturn_t opb_irq_handler(int irq, void *private)
+{
+	struct opb_pic *opb;
+	u32 ir, src, subvirq;
+
+	opb = (struct opb_pic *) private;
+
+	/* Read the OPB MLS Interrupt Register for
+	 * asserted interrupts */
+	ir = opb_in(opb, OPB_MLSIR);
+	if (!ir)
+		return IRQ_NONE;
+
+	do {
+		/* Get 1 - 32 source, *NOT* bit */
+		src = 32 - ffs(ir);
+
+		/* Translate from the OPB's conception of interrupt number to
+		 * Linux's virtual IRQ */
+
+		subvirq = irq_linear_revmap(opb->host, src);
+
+		generic_handle_irq(subvirq);
+	} while ((ir = opb_in(opb, OPB_MLSIR)));
+
+	return IRQ_HANDLED;
+}
+
+struct opb_pic *opb_pic_init_one(struct device_node *dn)
+{
+	struct opb_pic *opb;
+	struct resource res;
+
+	if (of_address_to_resource(dn, 0, &res)) {
+		printk(KERN_ERR "opb: Couldn't translate resource\n");
+		return  NULL;
+	}
+
+	opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL);
+	if (!opb) {
+		printk(KERN_ERR "opb: Failed to allocate opb struct!\n");
+		return NULL;
+	}
+
+	/* Get access to the OPB MMIO registers */
+	opb->regs = ioremap(res.start + 0x10000, 0x1000);
+	if (!opb->regs) {
+		printk(KERN_ERR "opb: Failed to allocate register space!\n");
+		goto free_opb;
+	}
+
+	/* Allocate an irq host so that Linux knows that despite only
+	 * having one interrupt to issue, we're the controller for multiple
+	 * hardware IRQs, so later we can lookup their virtual IRQs. */
+
+	opb->host = irq_alloc_host(dn, IRQ_HOST_MAP_LINEAR,
+			OPB_NR_IRQS, &opb_host_ops, -1);
+
+	if (!opb->host) {
+		printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
+		goto free_regs;
+	}
+
+	opb->index = opb_index++;
+	spin_lock_init(&opb->lock);
+	opb->host->host_data = opb;
+
+	/* Disable all interrupts by default */
+	opb_out(opb, OPB_MLSASIER, 0);
+	opb_out(opb, OPB_MLSIER, 0);
+
+	/* ACK any interrupts left by FW */
+	opb_out(opb, OPB_MLSIR, 0xFFFFFFFF);
+
+	return opb;
+
+free_regs:
+	iounmap(opb->regs);
+free_opb:
+	kfree(opb);
+	return NULL;
+}
+
+void __init opb_pic_init(void)
+{
+	struct device_node *dn;
+	struct opb_pic *opb;
+	int virq;
+	int rc;
+
+	/* Call init_one for each OPB device */
+	for_each_compatible_node(dn, NULL, "ibm,opb") {
+
+		/* Fill in an OPB struct */
+		opb = opb_pic_init_one(dn);
+		if (!opb) {
+			printk(KERN_WARNING "opb: Failed to init node, skipped!\n");
+			continue;
+		}
+
+		/* Map / get opb's hardware virtual irq */
+		virq = irq_of_parse_and_map(dn, 0);
+		if (virq <= 0) {
+			printk("opb: irq_op_parse_and_map failed!\n");
+			continue;
+		}
+
+		/* Attach opb interrupt handler to new virtual IRQ */
+		rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
+		if (rc) {
+			printk("opb: request_irq failed: %d\n", rc);
+			continue;
+		}
+
+		printk("OPB%d init with %d IRQs at %p\n", opb->index,
+				OPB_NR_IRQS, opb->regs);
+	}
+}
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
new file mode 100644
index 00000000000..40f28916ff6
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+
+static void psr2_spin(void)
+{
+	hard_irq_disable();
+	for (;;) ;
+}
+
+static void psr2_restart(char *cmd)
+{
+	psr2_spin();
+}
+
+static int psr2_probe_devices(void)
+{
+	struct device_node *np;
+
+	/* Our RTC is a ds1500. It seems to be programatically compatible
+	 * with the ds1511 for which we have a driver so let's use that
+	 */
+	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+	if (np != NULL) {
+		struct resource res;
+		if (of_address_to_resource(np, 0, &res) == 0)
+			platform_device_register_simple("ds1511", 0, &res, 1);
+	}
+	return 0;
+}
+machine_arch_initcall(psr2_md, psr2_probe_devices);
+
+static void __init psr2_setup_arch(void)
+{
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	scom_init_wsp();
+
+	/* Setup SMP callback */
+#ifdef CONFIG_SMP
+	a2_setup_smp();
+#endif
+}
+
+static int __init psr2_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
+		return 0;
+
+	return 1;
+}
+
+static void __init psr2_init_irq(void)
+{
+	wsp_init_irq();
+	opb_pic_init();
+}
+
+define_machine(psr2_md) {
+	.name			= "PSR2 A2",
+	.probe			= psr2_probe,
+	.setup_arch		= psr2_setup_arch,
+	.restart		= psr2_restart,
+	.power_off		= psr2_spin,
+	.halt			= psr2_spin,
+	.calibrate_decr		= generic_calibrate_decr,
+	.init_IRQ		= psr2_init_irq,
+	.progress		= udbg_progress,
+	.power_save		= book3e_idle,
+};
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
new file mode 100644
index 00000000000..141e7803209
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/scom_smp.c
@@ -0,0 +1,427 @@
+/*
+ * SCOM support for A2 platforms
+ *
+ * Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson,
+ *		       Michael Ellerman, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/cputhreads.h>
+#include <asm/reg_a2.h>
+#include <asm/scom.h>
+#include <asm/udbg.h>
+
+#include "wsp.h"
+
+#define SCOM_RAMC		0x2a		/* Ram Command */
+#define SCOM_RAMC_TGT1_EXT	0x80000000
+#define SCOM_RAMC_SRC1_EXT	0x40000000
+#define SCOM_RAMC_SRC2_EXT	0x20000000
+#define SCOM_RAMC_SRC3_EXT	0x10000000
+#define SCOM_RAMC_ENABLE	0x00080000
+#define SCOM_RAMC_THREADSEL	0x00060000
+#define SCOM_RAMC_EXECUTE	0x00010000
+#define SCOM_RAMC_MSR_OVERRIDE	0x00008000
+#define SCOM_RAMC_MSR_PR	0x00004000
+#define SCOM_RAMC_MSR_GS	0x00002000
+#define SCOM_RAMC_FORCE		0x00001000
+#define SCOM_RAMC_FLUSH		0x00000800
+#define SCOM_RAMC_INTERRUPT	0x00000004
+#define SCOM_RAMC_ERROR		0x00000002
+#define SCOM_RAMC_DONE		0x00000001
+#define SCOM_RAMI		0x29		/* Ram Instruction */
+#define SCOM_RAMIC		0x28		/* Ram Instruction and Command */
+#define SCOM_RAMIC_INSN		0xffffffff00000000
+#define SCOM_RAMD		0x2d		/* Ram Data */
+#define SCOM_RAMDH		0x2e		/* Ram Data High */
+#define SCOM_RAMDL		0x2f		/* Ram Data Low */
+#define SCOM_PCCR0		0x33		/* PC Configuration Register 0 */
+#define SCOM_PCCR0_ENABLE_DEBUG	0x80000000
+#define SCOM_PCCR0_ENABLE_RAM	0x40000000
+#define SCOM_THRCTL		0x30		/* Thread Control and Status */
+#define SCOM_THRCTL_T0_STOP	0x80000000
+#define SCOM_THRCTL_T1_STOP	0x40000000
+#define SCOM_THRCTL_T2_STOP	0x20000000
+#define SCOM_THRCTL_T3_STOP	0x10000000
+#define SCOM_THRCTL_T0_STEP	0x08000000
+#define SCOM_THRCTL_T1_STEP	0x04000000
+#define SCOM_THRCTL_T2_STEP	0x02000000
+#define SCOM_THRCTL_T3_STEP	0x01000000
+#define SCOM_THRCTL_T0_RUN	0x00800000
+#define SCOM_THRCTL_T1_RUN	0x00400000
+#define SCOM_THRCTL_T2_RUN	0x00200000
+#define SCOM_THRCTL_T3_RUN	0x00100000
+#define SCOM_THRCTL_T0_PM	0x00080000
+#define SCOM_THRCTL_T1_PM	0x00040000
+#define SCOM_THRCTL_T2_PM	0x00020000
+#define SCOM_THRCTL_T3_PM	0x00010000
+#define SCOM_THRCTL_T0_UDE	0x00008000
+#define SCOM_THRCTL_T1_UDE	0x00004000
+#define SCOM_THRCTL_T2_UDE	0x00002000
+#define SCOM_THRCTL_T3_UDE	0x00001000
+#define SCOM_THRCTL_ASYNC_DIS	0x00000800
+#define SCOM_THRCTL_TB_DIS	0x00000400
+#define SCOM_THRCTL_DEC_DIS	0x00000200
+#define SCOM_THRCTL_AND		0x31		/* Thread Control and Status */
+#define SCOM_THRCTL_OR		0x32		/* Thread Control and Status */
+
+
+static DEFINE_PER_CPU(scom_map_t, scom_ptrs);
+
+static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread)
+{
+	scom_map_t scom = per_cpu(scom_ptrs, cpu);
+	int tcpu;
+
+	if (scom_map_ok(scom)) {
+		*first_thread = 0;
+		return scom;
+	}
+
+	*first_thread = 1;
+
+	scom = scom_map_device(np, 0);
+
+	for (tcpu = cpu_first_thread_sibling(cpu);
+	     tcpu <= cpu_last_thread_sibling(cpu); tcpu++)
+		per_cpu(scom_ptrs, tcpu) = scom;
+
+	/* Hack: for the boot core, this will actually get called on
+	 * the second thread up, not the first so our test above will
+	 * set first_thread incorrectly. */
+	if (cpu_first_thread_sibling(cpu) == 0)
+		*first_thread = 0;
+
+	return scom;
+}
+
+static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask)
+{
+	u64 cmd, mask, val;
+	int n = 0;
+
+	cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28)
+		| ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE;
+	mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR;
+
+	scom_write(scom, SCOM_RAMIC, cmd);
+
+	while (!((val = scom_read(scom, SCOM_RAMC)) & mask)) {
+		pr_devel("Waiting on RAMC = 0x%llx\n", val);
+		if (++n == 3) {
+			pr_err("RAMC timeout on instruction 0x%08x, thread %d\n",
+			       insn, thread);
+			return -1;
+		}
+	}
+
+	if (val & SCOM_RAMC_INTERRUPT) {
+		pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n",
+		       insn, thread);
+		return -SCOM_RAMC_INTERRUPT;
+	}
+
+	if (val & SCOM_RAMC_ERROR) {
+		pr_err("RAMC error on instruction 0x%08x, thread %d\n",
+		       insn, thread);
+		return -SCOM_RAMC_ERROR;
+	}
+
+	return 0;
+}
+
+static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt,
+			  u64 *out_gpr)
+{
+	int rc;
+
+	/* or rN, rN, rN */
+	u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11);
+	rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0);
+	if (rc)
+		return rc;
+
+	*out_gpr = scom_read(scom, SCOM_RAMD);
+
+	return 0;
+}
+
+static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr)
+{
+	int rc, sprhi, sprlo;
+	u32 insn;
+
+	sprhi = spr >> 5;
+	sprlo = spr & 0x1f;
+	insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */
+
+	if (spr == 0x0ff0)
+		insn = 0x7c2000a6; /* mfmsr r1 */
+
+	rc = a2_scom_ram(scom, thread, insn, 0xf);
+	if (rc)
+		return rc;
+	return a2_scom_getgpr(scom, thread, 1, 1, out_spr);
+}
+
+static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr,
+			  int alt, u64 val)
+{
+	u32 lis = 0x3c000000 | (gpr << 21);
+	u32 li = 0x38000000 | (gpr << 21);
+	u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16);
+	u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16);
+	u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16);
+	u32 highest = val >> 48;
+	u32 higher = (val >> 32) & 0xffff;
+	u32 high = (val >> 16) & 0xffff;
+	u32 low = val & 0xffff;
+	int lext = alt ? 0x8 : 0x0;
+	int oext = alt ? 0xf : 0x0;
+	int rc = 0;
+
+	if (highest)
+		rc |= a2_scom_ram(scom, thread, lis | highest, lext);
+
+	if (higher) {
+		if (highest)
+			rc |= a2_scom_ram(scom, thread, oris | higher, oext);
+		else
+			rc |= a2_scom_ram(scom, thread, li | higher, lext);
+	}
+
+	if (highest || higher)
+		rc |= a2_scom_ram(scom, thread, rldicr32, oext);
+
+	if (high) {
+		if (highest || higher)
+			rc |= a2_scom_ram(scom, thread, oris | high, oext);
+		else
+			rc |= a2_scom_ram(scom, thread, lis | high, lext);
+	}
+
+	if (highest || higher || high)
+		rc |= a2_scom_ram(scom, thread, ori | low, oext);
+	else
+		rc |= a2_scom_ram(scom, thread, li | low, lext);
+
+	return rc;
+}
+
+static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val)
+{
+	int sprhi = spr >> 5;
+	int sprlo = spr & 0x1f;
+	/* mtspr spr, r1 */
+	u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11);
+
+	if (spr == 0x0ff0)
+		insn = 0x7c200124; /* mtmsr r1 */
+
+	if (a2_scom_setgpr(scom, thread, 1, 1, val))
+		return -1;
+
+	return a2_scom_ram(scom, thread, insn, 0xf);
+}
+
+static int a2_scom_initial_tlb(scom_map_t scom, int thread)
+{
+	extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[];
+	extern u32 a2_tlbinit_after_iprot_flush[];
+	extern u32 a2_tlbinit_after_linear_map[];
+	u32 assoc, entries, i;
+	u64 epn, tlbcfg;
+	u32 *p;
+	int rc;
+
+	/* Invalidate all entries (including iprot) */
+
+	rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg);
+	if (rc)
+		goto scom_fail;
+	entries = tlbcfg & TLBnCFG_N_ENTRY;
+	assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24;
+	epn = 0;
+
+	/* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
+	a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531);
+	/* Set MMUCR3 to write all thids bit to the TLB */
+	a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f);
+
+	/* Set MAS1 for 1G page size, and MAS2 to our initial EPN */
+	a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB));
+	a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
+	for (i = 0; i < entries; i++) {
+
+		a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc));
+
+		/* tlbwe */
+		rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0);
+		if (rc)
+			goto scom_fail;
+
+		/* Next entry is new address? */
+		if((i + 1) % assoc == 0) {
+			epn += (1 << 30);
+			a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
+		}
+	}
+
+	/* Setup args for linear mapping */
+	rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0));
+	if (rc)
+		goto scom_fail;
+
+	/* Linear mapping */
+	for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) {
+		rc = a2_scom_ram(scom, thread, *p, 0);
+		if (rc)
+			goto scom_fail;
+	}
+
+	/*
+	 * For the boot thread, between the linear mapping and the debug
+	 * mappings there is a loop to flush iprot mappings. Ramming doesn't do
+	 * branches, but the secondary threads don't need to be nearly as smart
+	 * (i.e. we don't need to worry about invalidating the mapping we're
+	 * standing on).
+	 */
+
+	/* Debug mappings. Expects r11 = MAS0 from linear map (set above) */
+	for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) {
+		rc = a2_scom_ram(scom, thread, *p, 0);
+		if (rc)
+			goto scom_fail;
+	}
+
+scom_fail:
+	if (rc)
+		pr_err("Setting up initial TLB failed, err %d\n", rc);
+
+	if (rc == -SCOM_RAMC_INTERRUPT) {
+		/* Interrupt, dump some status */
+		int rc[10];
+		u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2;
+		rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar);
+		rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0);
+		rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1);
+		rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr);
+		rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0);
+		rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1);
+		rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2);
+		rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3);
+		rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8);
+		rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2);
+		pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]);
+		pr_err("    retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]);
+		pr_err("    retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]);
+		pr_err("    retreived ESR =0x%llx (err %d)\n", esr, rc[3]);
+		pr_err("    retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]);
+		pr_err("    retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]);
+		pr_err("    retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]);
+		pr_err("    retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]);
+		pr_err("    retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]);
+		pr_err("    retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]);
+	}
+
+	return rc;
+}
+
+int __devinit a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
+				  struct device_node *np)
+{
+	u64 init_iar, init_msr, init_ccr2;
+	unsigned long start_here;
+	int rc, core_setup;
+	scom_map_t scom;
+	u64 pccr0;
+
+	scom = get_scom(lcpu, np, &core_setup);
+	if (!scom) {
+		printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu);
+		return -1;
+	}
+
+	pr_devel("Bringing up CPU%d using SCOM...\n", lcpu);
+
+	pccr0 = scom_read(scom, SCOM_PCCR0);
+	scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG |
+				     SCOM_PCCR0_ENABLE_RAM);
+
+	/* Stop the thead with THRCTL. If we are setting up the TLB we stop all
+	 * threads. We also disable asynchronous interrupts while RAMing.
+	 */
+	if (core_setup)
+		scom_write(scom, SCOM_THRCTL_OR,
+			      SCOM_THRCTL_T0_STOP |
+			      SCOM_THRCTL_T1_STOP |
+			      SCOM_THRCTL_T2_STOP |
+			      SCOM_THRCTL_T3_STOP |
+			      SCOM_THRCTL_ASYNC_DIS);
+	else
+		scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx);
+
+	/* Flush its pipeline just in case */
+	scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) |
+		      SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE);
+
+	a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar);
+	a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr);
+	a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2);
+
+	/* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */
+	rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM);
+	if (rc) {
+		pr_err("Failed to set MSR ! err %d\n", rc);
+		return rc;
+	}
+
+	/* RAM in an sync/isync for the sake of it */
+	a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0);
+	a2_scom_ram(scom, thr_idx, 0x4c00012c, 0);
+
+	if (core_setup) {
+		pr_devel("CPU%d is first thread in core, initializing TLB...\n",
+			 lcpu);
+		rc = a2_scom_initial_tlb(scom, thr_idx);
+		if (rc)
+			goto fail;
+	}
+
+	start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
+					: generic_secondary_thread_init);
+	pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
+
+	rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here);
+	rc |= a2_scom_setgpr(scom, thr_idx, 3, 0,
+			     get_hard_smp_processor_id(lcpu));
+	/*
+	 * Tell book3e_secondary_core_init not to set up the TLB, we've
+	 * already done that.
+	 */
+	rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1);
+
+	rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx);
+
+	scom_write(scom, SCOM_RAMC, 0);
+	scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx));
+	scom_write(scom, SCOM_PCCR0, pccr0);
+fail:
+	pr_devel("  SCOM initialization %s\n", rc ? "failed" : "succeeded");
+	if (rc) {
+		pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n",
+		       init_iar, init_msr, init_ccr2);
+	}
+
+	return rc;
+}
diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c
new file mode 100644
index 00000000000..4052e2259f3
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/scom_wsp.c
@@ -0,0 +1,77 @@
+/*
+ *  SCOM backend for WSP
+ *
+ *  Copyright 2010 Benjamin Herrenschmidt, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/cputhreads.h>
+#include <asm/reg_a2.h>
+#include <asm/scom.h>
+#include <asm/udbg.h>
+
+#include "wsp.h"
+
+
+static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count)
+{
+	struct resource r;
+	u64 xscom_addr;
+
+	if (!of_get_property(dev, "scom-controller", NULL)) {
+		pr_err("%s: device %s is not a SCOM controller\n",
+			__func__, dev->full_name);
+		return SCOM_MAP_INVALID;
+	}
+
+	if (of_address_to_resource(dev, 0, &r)) {
+		pr_debug("Failed to find SCOM controller address\n");
+		return 0;
+	}
+
+	/* Transform the SCOM address into an XSCOM offset */
+	xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3);
+
+	return (scom_map_t)ioremap(r.start + xscom_addr, count << 3);
+}
+
+static void wsp_scom_unmap(scom_map_t map)
+{
+	iounmap((void *)map);
+}
+
+static u64 wsp_scom_read(scom_map_t map, u32 reg)
+{
+	u64 __iomem *addr = (u64 __iomem *)map;
+
+	return in_be64(addr + reg);
+}
+
+static void wsp_scom_write(scom_map_t map, u32 reg, u64 value)
+{
+	u64 __iomem *addr = (u64 __iomem *)map;
+
+	return out_be64(addr + reg, value);
+}
+
+static const struct scom_controller wsp_scom_controller = {
+	.map	= wsp_scom_map,
+	.unmap	= wsp_scom_unmap,
+	.read	= wsp_scom_read,
+	.write	= wsp_scom_write
+};
+
+void scom_init_wsp(void)
+{
+	scom_init(&wsp_scom_controller);
+}
diff --git a/arch/powerpc/platforms/wsp/setup.c b/arch/powerpc/platforms/wsp/setup.c
new file mode 100644
index 00000000000..11ac2f05e01
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/setup.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2010 Michael Ellerman, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include "wsp.h"
+
+/*
+ * Find chip-id by walking up device tree looking for ibm,wsp-chip-id property.
+ * Won't work for nodes that are not a descendant of a wsp node.
+ */
+int wsp_get_chip_id(struct device_node *dn)
+{
+	const u32 *p;
+	int rc;
+
+	/* Start looking at the specified node, not its parent */
+	dn = of_node_get(dn);
+	while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL)))
+		dn = of_get_next_parent(dn);
+
+	if (!dn)
+		return -1;
+
+	rc = *p;
+	of_node_put(dn);
+
+	return rc;
+}
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
new file mode 100644
index 00000000000..9d20fa9d371
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/smp.c
@@ -0,0 +1,88 @@
+/*
+ *  SMP Support for A2 platforms
+ *
+ *  Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/dbell.h>
+#include <asm/machdep.h>
+#include <asm/xics.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+static void __devinit smp_a2_setup_cpu(int cpu)
+{
+	doorbell_setup_this_cpu();
+
+	if (cpu != boot_cpuid)
+		xics_setup_cpu();
+}
+
+int __devinit smp_a2_kick_cpu(int nr)
+{
+	const char *enable_method;
+	struct device_node *np;
+	int thr_idx;
+
+	if (nr < 0 || nr >= NR_CPUS)
+		return -ENOENT;
+
+	np = of_get_cpu_node(nr, &thr_idx);
+	if (!np)
+		return -ENODEV;
+
+	enable_method = of_get_property(np, "enable-method", NULL);
+	pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method);
+
+	if (!enable_method) {
+                printk(KERN_ERR "CPU%d has no enable-method\n", nr);
+		return -ENOENT;
+	} else if (strcmp(enable_method, "ibm,a2-scom") == 0) {
+		if (a2_scom_startup_cpu(nr, thr_idx, np))
+			return -1;
+	} else {
+		printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n",
+                       nr, enable_method);
+		return -EINVAL;
+	}
+
+	/*
+	 * The processor is currently spinning, waiting for the
+	 * cpu_start field to become non-zero After we set cpu_start,
+	 * the processor will continue on to secondary_start
+	 */
+	paca[nr].cpu_start = 1;
+
+	return 0;
+}
+
+static int __init smp_a2_probe(void)
+{
+	return cpus_weight(cpu_possible_map);
+}
+
+static struct smp_ops_t a2_smp_ops = {
+	.message_pass	= smp_muxed_ipi_message_pass,
+	.cause_ipi	= doorbell_cause_ipi,
+	.probe		= smp_a2_probe,
+	.kick_cpu	= smp_a2_kick_cpu,
+	.setup_cpu	= smp_a2_setup_cpu,
+};
+
+void __init a2_setup_smp(void)
+{
+	smp_ops = &a2_smp_ops;
+}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
new file mode 100644
index 00000000000..7c3e087fd2f
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -0,0 +1,17 @@
+#ifndef __WSP_H
+#define __WSP_H
+
+#include <asm/wsp.h>
+
+extern void wsp_setup_pci(void);
+extern void scom_init_wsp(void);
+
+extern void a2_setup_smp(void);
+extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
+			       struct device_node *np);
+int smp_a2_cpu_bootable(unsigned int nr);
+int __devinit smp_a2_kick_cpu(int nr);
+
+void opb_pic_init(void);
+
+#endif /*  __WSP_H */
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index 396582835cb..d775fd148d1 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -12,3 +12,13 @@ config PPC_MSI_BITMAP
 	depends on PCI_MSI
 	default y if MPIC
 	default y if FSL_PCI
+
+source "arch/powerpc/sysdev/xics/Kconfig"
+
+config PPC_SCOM
+	bool
+
+config SCOM_DEBUGFS
+	bool "Expose SCOM controllers via debugfs"
+	depends on PPC_SCOM
+	default n
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 1e0c933ef77..6076e0074a8 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -57,3 +57,9 @@ obj-$(CONFIG_PPC_MPC52xx)	+= mpc5xxx_clocks.o
 ifeq ($(CONFIG_SUSPEND),y)
 obj-$(CONFIG_6xx)		+= 6xx-suspend.o
 endif
+
+obj-$(CONFIG_PPC_SCOM)		+= scom.o
+
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
+obj-$(CONFIG_PPC_XICS)		+= xics/
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 27402c7d309..bd0d54060b9 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -95,7 +95,7 @@ axon_ram_irq_handler(int irq, void *dev)
 
 	BUG_ON(!bank);
 
-	dev_err(&device->dev, "Correctable memory error occured\n");
+	dev_err(&device->dev, "Correctable memory error occurred\n");
 	bank->ecc_counter++;
 	return IRQ_HANDLED;
 }
@@ -216,7 +216,7 @@ static int axon_ram_probe(struct platform_device *device)
 			AXON_RAM_DEVICE_NAME, axon_ram_bank_id, bank->size >> 20);
 
 	bank->ph_addr = resource.start;
-	bank->io_addr = (unsigned long) ioremap_flags(
+	bank->io_addr = (unsigned long) ioremap_prot(
 			bank->ph_addr, bank->size, _PAGE_NO_CACHE);
 	if (bank->io_addr == 0) {
 		dev_err(&device->dev, "ioremap() failed\n");
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/arch/powerpc/sysdev/bestcomm/bestcomm.h
index 23a95f80dfd..a0e2e6b19b5 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.h
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.h
@@ -20,7 +20,7 @@
  * struct bcom_bd - Structure describing a generic BestComm buffer descriptor
  * @status: The current status of this buffer. Exact meaning depends on the
  *          task type
- * @data: An array of u32 extra data.  Size of array is task dependant.
+ * @data: An array of u32 extra data.  Size of array is task dependent.
  *
  * Note: Don't dereference a bcom_bd pointer as an array.  The size of the
  *       bcom_bd is variable.  Use bcom_get_bd() instead.
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h
index eb0d1c883c3..3b52f3ffbdf 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h
@@ -97,7 +97,7 @@ struct bcom_task_header {
 	u8	reserved[8];
 };
 
-/* Descriptors stucture & co */
+/* Descriptors structure & co */
 #define BCOM_DESC_NOP		0x000001f8
 #define BCOM_LCD_MASK		0x80000000
 #define BCOM_DRD_EXTENDED	0x40000000
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 8b5aba26332..350787c83e2 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -58,21 +58,21 @@ static struct irq_host *cpm_pic_host;
 
 static void cpm_mask_irq(struct irq_data *d)
 {
-	unsigned int cpm_vec = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
 
 	clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
 }
 
 static void cpm_unmask_irq(struct irq_data *d)
 {
-	unsigned int cpm_vec = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
 
 	setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
 }
 
 static void cpm_end_irq(struct irq_data *d)
 {
-	unsigned int cpm_vec = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
 
 	out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
 }
@@ -157,7 +157,7 @@ unsigned int cpm_pic_init(void)
 		goto end;
 
 	/* Initialize the CPM interrupt controller. */
-	hwirq = (unsigned int)irq_map[sirq].hwirq;
+	hwirq = (unsigned int)virq_to_hw(sirq);
 	out_be32(&cpic_reg->cpic_cicr,
 	    (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
 		((hwirq/2) << 13) | CICR_HP_MASK);
@@ -223,7 +223,7 @@ void __init cpm_reset(void)
 
 	/* Set SDMA Bus Request priority 5.
 	 * On 860T, this also enables FEC priority 6.  I am not sure
-	 * this is what we realy want for some applications, but the
+	 * this is what we really want for some applications, but the
 	 * manual recommends it.
 	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
 	 */
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 5495c1be472..bcab50e2a9e 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -81,7 +81,7 @@ static const u_char irq_to_siubit[] = {
 static void cpm2_mask_irq(struct irq_data *d)
 {
 	int	bit, word;
-	unsigned int irq_nr = virq_to_hw(d->irq);
+	unsigned int irq_nr = irqd_to_hwirq(d);
 
 	bit = irq_to_siubit[irq_nr];
 	word = irq_to_siureg[irq_nr];
@@ -93,7 +93,7 @@ static void cpm2_mask_irq(struct irq_data *d)
 static void cpm2_unmask_irq(struct irq_data *d)
 {
 	int	bit, word;
-	unsigned int irq_nr = virq_to_hw(d->irq);
+	unsigned int irq_nr = irqd_to_hwirq(d);
 
 	bit = irq_to_siubit[irq_nr];
 	word = irq_to_siureg[irq_nr];
@@ -105,7 +105,7 @@ static void cpm2_unmask_irq(struct irq_data *d)
 static void cpm2_ack(struct irq_data *d)
 {
 	int	bit, word;
-	unsigned int irq_nr = virq_to_hw(d->irq);
+	unsigned int irq_nr = irqd_to_hwirq(d);
 
 	bit = irq_to_siubit[irq_nr];
 	word = irq_to_siureg[irq_nr];
@@ -116,7 +116,7 @@ static void cpm2_ack(struct irq_data *d)
 static void cpm2_end_irq(struct irq_data *d)
 {
 	int	bit, word;
-	unsigned int irq_nr = virq_to_hw(d->irq);
+	unsigned int irq_nr = irqd_to_hwirq(d);
 
 	bit = irq_to_siubit[irq_nr];
 	word = irq_to_siureg[irq_nr];
@@ -133,7 +133,7 @@ static void cpm2_end_irq(struct irq_data *d)
 
 static int cpm2_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
-	unsigned int src = virq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned int vold, vnew, edibit;
 
 	/* Port C interrupts are either IRQ_TYPE_EDGE_FALLING or
diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
index 54fb1922fe3..11641589917 100644
--- a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
+++ b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
@@ -106,10 +106,10 @@ int __init instantiate_cache_sram(struct platform_device *dev,
 		goto out_free;
 	}
 
-	cache_sram->base_virt = ioremap_flags(cache_sram->base_phys,
+	cache_sram->base_virt = ioremap_prot(cache_sram->base_phys,
 				cache_sram->size, _PAGE_COHERENT | PAGE_KERNEL);
 	if (!cache_sram->base_virt) {
-		dev_err(&dev->dev, "%s: ioremap_flags failed\n",
+		dev_err(&dev->dev, "%s: ioremap_prot failed\n",
 				dev->dev.of_node->full_name);
 		ret = -ENOMEM;
 		goto out_release;
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index d5679dc1e20..92e78333c47 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -110,7 +110,7 @@ static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
 	list_for_each_entry(entry, &pdev->msi_list, list) {
 		if (entry->irq == NO_IRQ)
 			continue;
-		msi_data = irq_get_handler_data(entry->irq);
+		msi_data = irq_get_chip_data(entry->irq);
 		irq_set_msi_desc(entry->irq, NULL);
 		msi_bitmap_free_hwirqs(&msi_data->bitmap,
 				       virq_to_hw(entry->irq), 1);
@@ -168,7 +168,7 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 			rc = -ENOSPC;
 			goto out_free;
 		}
-		irq_set_handler_data(virq, msi_data);
+		/* chip_data is msi_data via host->hostdata in host->map() */
 		irq_set_msi_desc(virq, entry);
 
 		fsl_compose_msi_msg(pdev, hwirq, &msg, msi_data);
@@ -193,7 +193,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	u32 have_shift = 0;
 	struct fsl_msi_cascade_data *cascade_data;
 
-	cascade_data = (struct fsl_msi_cascade_data *)irq_get_handler_data(irq);
+	cascade_data = irq_get_handler_data(irq);
 	msi_data = cascade_data->msi_data;
 
 	raw_spin_lock(&desc->lock);
@@ -253,7 +253,7 @@ unlock:
 
 static int fsl_of_msi_remove(struct platform_device *ofdev)
 {
-	struct fsl_msi *msi = ofdev->dev.platform_data;
+	struct fsl_msi *msi = platform_get_drvdata(ofdev);
 	int virq, i;
 	struct fsl_msi_cascade_data *cascade_data;
 
@@ -304,8 +304,10 @@ static int __devinit fsl_msi_setup_hwirq(struct fsl_msi *msi,
 	return 0;
 }
 
+static const struct of_device_id fsl_of_msi_ids[];
 static int __devinit fsl_of_msi_probe(struct platform_device *dev)
 {
+	const struct of_device_id *match;
 	struct fsl_msi *msi;
 	struct resource res;
 	int err, i, j, irq_index, count;
@@ -316,9 +318,10 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
 	u32 offset;
 	static const u32 all_avail[] = { 0, NR_MSI_IRQS };
 
-	if (!dev->dev.of_match)
+	match = of_match_device(fsl_of_msi_ids, &dev->dev);
+	if (!match)
 		return -EINVAL;
-	features = dev->dev.of_match->data;
+	features = match->data;
 
 	printk(KERN_DEBUG "Setting up Freescale MSI support\n");
 
@@ -327,7 +330,7 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
 		dev_err(&dev->dev, "No memory for MSI structure\n");
 		return -ENOMEM;
 	}
-	dev->dev.platform_data = msi;
+	platform_set_drvdata(dev, msi);
 
 	msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR,
 				      NR_MSI_IRQS, &fsl_msi_host_ops, 0);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index f8f7f28c634..68ca9290df9 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -324,6 +324,11 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	struct resource rsrc;
 	const int *bus_range;
 
+	if (!of_device_is_available(dev)) {
+		pr_warning("%s: disabled\n", dev->full_name);
+		return -ENODEV;
+	}
+
 	pr_debug("Adding PCI host bridge %s\n", dev->full_name);
 
 	/* Fetch host bridge registers address */
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 14232d57369..49798532b47 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1457,7 +1457,6 @@ int fsl_rio_setup(struct platform_device *dev)
 	port->ops = ops;
 	port->priv = priv;
 	port->phys_efptr = 0x100;
-	rio_register_mport(port);
 
 	priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1);
 	rio_regs_win = priv->regs_win;
@@ -1504,6 +1503,9 @@ int fsl_rio_setup(struct platform_device *dev)
 	dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
 			port->sys_size ? 65536 : 256);
 
+	if (rio_register_mport(port))
+		goto err;
+
 	if (port->host_deviceid >= 0)
 		out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
 			RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 142770cb84b..d18bb27e4df 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -185,18 +185,6 @@ static int i8259_host_map(struct irq_host *h, unsigned int virq,
 	return 0;
 }
 
-static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
-{
-	/* Make sure irq is masked in hardware */
-	i8259_mask_irq(irq_get_irq_data(virq));
-
-	/* remove chip and handler */
-	irq_set_chip_and_handler(virq, NULL, NULL);
-
-	/* Make sure it's completed */
-	synchronize_irq(virq);
-}
-
 static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
 			    const u32 *intspec, unsigned int intsize,
 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
@@ -220,7 +208,6 @@ static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
 static struct irq_host_ops i8259_host_ops = {
 	.match = i8259_host_match,
 	.map = i8259_host_map,
-	.unmap = i8259_host_unmap,
 	.xlate = i8259_host_xlate,
 };
 
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 7ed80967664..82fdad885d2 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -117,7 +117,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
 			 (devfn << 8) | reg | cfg_type));
 
-	/* surpress setting of PCI_PRIMARY_BUS */
+	/* suppress setting of PCI_PRIMARY_BUS */
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
 		if ((offset == PCI_PRIMARY_BUS) &&
 			(bus->number == hose->first_busno))
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index fa438be962b..7367d17364c 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -18,7 +18,7 @@
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
@@ -521,12 +521,10 @@ static inline struct ipic * ipic_from_irq(unsigned int virq)
 	return primary_ipic;
 }
 
-#define ipic_irq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
-
 static void ipic_unmask_irq(struct irq_data *d)
 {
 	struct ipic *ipic = ipic_from_irq(d->irq);
-	unsigned int src = ipic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 temp;
 
@@ -542,7 +540,7 @@ static void ipic_unmask_irq(struct irq_data *d)
 static void ipic_mask_irq(struct irq_data *d)
 {
 	struct ipic *ipic = ipic_from_irq(d->irq);
-	unsigned int src = ipic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 temp;
 
@@ -562,7 +560,7 @@ static void ipic_mask_irq(struct irq_data *d)
 static void ipic_ack_irq(struct irq_data *d)
 {
 	struct ipic *ipic = ipic_from_irq(d->irq);
-	unsigned int src = ipic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 temp;
 
@@ -581,7 +579,7 @@ static void ipic_ack_irq(struct irq_data *d)
 static void ipic_mask_irq_and_ack(struct irq_data *d)
 {
 	struct ipic *ipic = ipic_from_irq(d->irq);
-	unsigned int src = ipic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 temp;
 
@@ -604,7 +602,7 @@ static void ipic_mask_irq_and_ack(struct irq_data *d)
 static int ipic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
 	struct ipic *ipic = ipic_from_irq(d->irq);
-	unsigned int src = ipic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned int vold, vnew, edibit;
 
 	if (flow_type == IRQ_TYPE_NONE)
@@ -793,7 +791,7 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 int ipic_set_priority(unsigned int virq, unsigned int priority)
 {
 	struct ipic *ipic = ipic_from_irq(virq);
-	unsigned int src = ipic_irq_to_hw(virq);
+	unsigned int src = virq_to_hw(virq);
 	u32 temp;
 
 	if (priority > 7)
@@ -821,7 +819,7 @@ int ipic_set_priority(unsigned int virq, unsigned int priority)
 void ipic_set_highest_priority(unsigned int virq)
 {
 	struct ipic *ipic = ipic_from_irq(virq);
-	unsigned int src = ipic_irq_to_hw(virq);
+	unsigned int src = virq_to_hw(virq);
 	u32 temp;
 
 	temp = ipic_read(ipic->regs, IPIC_SICFR);
@@ -902,7 +900,7 @@ static struct {
 	u32 sercr;
 } ipic_saved_state;
 
-static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
+static int ipic_suspend(void)
 {
 	struct ipic *ipic = primary_ipic;
 
@@ -933,7 +931,7 @@ static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
 	return 0;
 }
 
-static int ipic_resume(struct sys_device *sdev)
+static void ipic_resume(void)
 {
 	struct ipic *ipic = primary_ipic;
 
@@ -949,44 +947,26 @@ static int ipic_resume(struct sys_device *sdev)
 	ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr);
 	ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr);
 	ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr);
-
-	return 0;
 }
 #else
 #define ipic_suspend NULL
 #define ipic_resume NULL
 #endif
 
-static struct sysdev_class ipic_sysclass = {
-	.name = "ipic",
+static struct syscore_ops ipic_syscore_ops = {
 	.suspend = ipic_suspend,
 	.resume = ipic_resume,
 };
 
-static struct sys_device device_ipic = {
-	.id		= 0,
-	.cls		= &ipic_sysclass,
-};
-
-static int __init init_ipic_sysfs(void)
+static int __init init_ipic_syscore(void)
 {
-	int rc;
-
 	if (!primary_ipic || !primary_ipic->regs)
 		return -ENODEV;
-	printk(KERN_DEBUG "Registering ipic with sysfs...\n");
 
-	rc = sysdev_class_register(&ipic_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering ipic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_ipic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering ipic sys device\n");
-		return -ENODEV;
-	}
+	printk(KERN_DEBUG "Registering ipic system core operations\n");
+	register_syscore_ops(&ipic_syscore_ops);
+
 	return 0;
 }
 
-subsys_initcall(init_ipic_sysfs);
+subsys_initcall(init_ipic_syscore);
diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index 20732420906..ddc877a3a23 100644
--- a/arch/powerpc/sysdev/mmio_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -115,6 +115,8 @@ int __init mmio_nvram_init(void)
 	int ret;
 
 	nvram_node = of_find_node_by_type(NULL, "nvram");
+	if (!nvram_node)
+		nvram_node = of_find_compatible_node(NULL, NULL, "nvram");
 	if (!nvram_node) {
 		printk(KERN_WARNING "nvram: no node found in device-tree\n");
 		return -ENODEV;
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index f550e23632f..20924f2246f 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -28,7 +28,7 @@ int cpm_get_irq(struct pt_regs *regs);
 static void mpc8xx_unmask_irq(struct irq_data *d)
 {
 	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
 
 	bit = irq_nr & 0x1f;
 	word = irq_nr >> 5;
@@ -40,7 +40,7 @@ static void mpc8xx_unmask_irq(struct irq_data *d)
 static void mpc8xx_mask_irq(struct irq_data *d)
 {
 	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
 
 	bit = irq_nr & 0x1f;
 	word = irq_nr >> 5;
@@ -52,7 +52,7 @@ static void mpc8xx_mask_irq(struct irq_data *d)
 static void mpc8xx_ack(struct irq_data *d)
 {
 	int	bit;
-	unsigned int irq_nr = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
 
 	bit = irq_nr & 0x1f;
 	out_be32(&siu_reg->sc_sipend, 1 << (31-bit));
@@ -61,7 +61,7 @@ static void mpc8xx_ack(struct irq_data *d)
 static void mpc8xx_end_irq(struct irq_data *d)
 {
 	int bit, word;
-	unsigned int irq_nr = (unsigned int)irq_map[d->irq].hwirq;
+	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
 
 	bit = irq_nr & 0x1f;
 	word = irq_nr >> 5;
@@ -73,14 +73,14 @@ static void mpc8xx_end_irq(struct irq_data *d)
 static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
 	if (flow_type & IRQ_TYPE_EDGE_FALLING) {
-		irq_hw_number_t hw = (unsigned int)irq_map[d->irq].hwirq;
+		irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d);
 		unsigned int siel = in_be32(&siu_reg->sc_siel);
 
 		/* only external IRQ senses are programmable */
 		if ((hw & 1) == 0) {
 			siel |= (0x80000000 >> hw);
 			out_be32(&siu_reg->sc_siel, siel);
-			__irq_set_handler_locked(irq, handle_edge_irq);
+			__irq_set_handler_locked(d->irq, handle_edge_irq);
 		}
 	}
 	return 0;
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
index 0892a2841c2..fb4963abdf5 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -163,7 +163,7 @@ static void mpc8xxx_irq_unmask(struct irq_data *d)
 
 	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 
-	setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+	setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 
 	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 }
@@ -176,7 +176,7 @@ static void mpc8xxx_irq_mask(struct irq_data *d)
 
 	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 
-	clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+	clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 
 	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 }
@@ -186,7 +186,7 @@ static void mpc8xxx_irq_ack(struct irq_data *d)
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
 	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
 
-	out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+	out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 }
 
 static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
@@ -199,14 +199,14 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
 	case IRQ_TYPE_EDGE_FALLING:
 		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 		setbits32(mm->regs + GPIO_ICR,
-			  mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+			  mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 		break;
 
 	case IRQ_TYPE_EDGE_BOTH:
 		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 		clrbits32(mm->regs + GPIO_ICR,
-			  mpc8xxx_gpio2mask(virq_to_hw(d->irq)));
+			  mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 		break;
 
@@ -221,7 +221,7 @@ static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
 	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
-	unsigned long gpio = virq_to_hw(d->irq);
+	unsigned long gpio = irqd_to_hwirq(d);
 	void __iomem *reg;
 	unsigned int shift;
 	unsigned long flags;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index f91c065bed5..3a8de5bb628 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -6,6 +6,7 @@
  *  with various broken implementations of this HW.
  *
  *  Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
+ *  Copyright 2010-2011 Freescale Semiconductor, Inc.
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License.  See the file COPYING in the main directory of this archive
@@ -27,6 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/ptrace.h>
 #include <asm/signal.h>
@@ -218,6 +220,28 @@ static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 valu
 	_mpic_write(mpic->reg_type, &mpic->gregs, offset, value);
 }
 
+static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+{
+	unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
+			      ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+
+	if (tm >= 4)
+		offset += 0x1000 / 4;
+
+	return _mpic_read(mpic->reg_type, &mpic->tmregs, offset);
+}
+
+static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value)
+{
+	unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
+			      ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+
+	if (tm >= 4)
+		offset += 0x1000 / 4;
+
+	_mpic_write(mpic->reg_type, &mpic->tmregs, offset, value);
+}
+
 static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg)
 {
 	unsigned int cpu = mpic_processor_id(mpic);
@@ -268,6 +292,8 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
 #define mpic_write(b,r,v)	_mpic_write(mpic->reg_type,&(b),(r),(v))
 #define mpic_ipi_read(i)	_mpic_ipi_read(mpic,(i))
 #define mpic_ipi_write(i,v)	_mpic_ipi_write(mpic,(i),(v))
+#define mpic_tm_read(i)		_mpic_tm_read(mpic,(i))
+#define mpic_tm_write(i,v)	_mpic_tm_write(mpic,(i),(v))
 #define mpic_cpu_read(i)	_mpic_cpu_read(mpic,(i))
 #define mpic_cpu_write(i,v)	_mpic_cpu_write(mpic,(i),(v))
 #define mpic_irq_read(s,r)	_mpic_irq_read(mpic,(s),(r))
@@ -607,8 +633,6 @@ static int irq_choose_cpu(const struct cpumask *mask)
 }
 #endif
 
-#define mpic_irq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
-
 /* Find an mpic associated with a given linux interrupt */
 static struct mpic *mpic_find(unsigned int irq)
 {
@@ -621,11 +645,18 @@ static struct mpic *mpic_find(unsigned int irq)
 /* Determine if the linux irq is an IPI */
 static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
 {
-	unsigned int src = mpic_irq_to_hw(irq);
+	unsigned int src = virq_to_hw(irq);
 
 	return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
 }
 
+/* Determine if the linux irq is a timer */
+static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq)
+{
+	unsigned int src = virq_to_hw(irq);
+
+	return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]);
+}
 
 /* Convert a cpu mask from logical to physical cpu numbers. */
 static inline u32 mpic_physmask(u32 cpumask)
@@ -633,7 +664,7 @@ static inline u32 mpic_physmask(u32 cpumask)
 	int i;
 	u32 mask = 0;
 
-	for (i = 0; i < NR_CPUS; ++i, cpumask >>= 1)
+	for (i = 0; i < min(32, NR_CPUS); ++i, cpumask >>= 1)
 		mask |= (cpumask & 1) << get_hard_smp_processor_id(i);
 	return mask;
 }
@@ -674,7 +705,7 @@ void mpic_unmask_irq(struct irq_data *d)
 {
 	unsigned int loops = 100000;
 	struct mpic *mpic = mpic_from_irq_data(d);
-	unsigned int src = mpic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 
 	DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, d->irq, src);
 
@@ -695,7 +726,7 @@ void mpic_mask_irq(struct irq_data *d)
 {
 	unsigned int loops = 100000;
 	struct mpic *mpic = mpic_from_irq_data(d);
-	unsigned int src = mpic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 
 	DBG("%s: disable_irq: %d (src %d)\n", mpic->name, d->irq, src);
 
@@ -733,7 +764,7 @@ void mpic_end_irq(struct irq_data *d)
 static void mpic_unmask_ht_irq(struct irq_data *d)
 {
 	struct mpic *mpic = mpic_from_irq_data(d);
-	unsigned int src = mpic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 
 	mpic_unmask_irq(d);
 
@@ -744,7 +775,7 @@ static void mpic_unmask_ht_irq(struct irq_data *d)
 static unsigned int mpic_startup_ht_irq(struct irq_data *d)
 {
 	struct mpic *mpic = mpic_from_irq_data(d);
-	unsigned int src = mpic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 
 	mpic_unmask_irq(d);
 	mpic_startup_ht_interrupt(mpic, src, irqd_is_level_type(d));
@@ -755,7 +786,7 @@ static unsigned int mpic_startup_ht_irq(struct irq_data *d)
 static void mpic_shutdown_ht_irq(struct irq_data *d)
 {
 	struct mpic *mpic = mpic_from_irq_data(d);
-	unsigned int src = mpic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 
 	mpic_shutdown_ht_interrupt(mpic, src);
 	mpic_mask_irq(d);
@@ -764,7 +795,7 @@ static void mpic_shutdown_ht_irq(struct irq_data *d)
 static void mpic_end_ht_irq(struct irq_data *d)
 {
 	struct mpic *mpic = mpic_from_irq_data(d);
-	unsigned int src = mpic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 
 #ifdef DEBUG_IRQ
 	DBG("%s: end_irq: %d\n", mpic->name, d->irq);
@@ -785,7 +816,7 @@ static void mpic_end_ht_irq(struct irq_data *d)
 static void mpic_unmask_ipi(struct irq_data *d)
 {
 	struct mpic *mpic = mpic_from_ipi(d);
-	unsigned int src = mpic_irq_to_hw(d->irq) - mpic->ipi_vecs[0];
+	unsigned int src = virq_to_hw(d->irq) - mpic->ipi_vecs[0];
 
 	DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, d->irq, src);
 	mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK);
@@ -812,27 +843,42 @@ static void mpic_end_ipi(struct irq_data *d)
 
 #endif /* CONFIG_SMP */
 
+static void mpic_unmask_tm(struct irq_data *d)
+{
+	struct mpic *mpic = mpic_from_irq_data(d);
+	unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0];
+
+	DBG("%s: enable_tm: %d (tm %d)\n", mpic->name, irq, src);
+	mpic_tm_write(src, mpic_tm_read(src) & ~MPIC_VECPRI_MASK);
+	mpic_tm_read(src);
+}
+
+static void mpic_mask_tm(struct irq_data *d)
+{
+	struct mpic *mpic = mpic_from_irq_data(d);
+	unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0];
+
+	mpic_tm_write(src, mpic_tm_read(src) | MPIC_VECPRI_MASK);
+	mpic_tm_read(src);
+}
+
 int mpic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
 		      bool force)
 {
 	struct mpic *mpic = mpic_from_irq_data(d);
-	unsigned int src = mpic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 
 	if (mpic->flags & MPIC_SINGLE_DEST_CPU) {
 		int cpuid = irq_choose_cpu(cpumask);
 
 		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
 	} else {
-		cpumask_var_t tmp;
-
-		alloc_cpumask_var(&tmp, GFP_KERNEL);
+		u32 mask = cpumask_bits(cpumask)[0];
 
-		cpumask_and(tmp, cpumask, cpu_online_mask);
+		mask &= cpumask_bits(cpu_online_mask)[0];
 
 		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
-			       mpic_physmask(cpumask_bits(tmp)[0]));
-
-		free_cpumask_var(tmp);
+			       mpic_physmask(mask));
 	}
 
 	return 0;
@@ -862,7 +908,7 @@ static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type)
 int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
 	struct mpic *mpic = mpic_from_irq_data(d);
-	unsigned int src = mpic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned int vecpri, vold, vnew;
 
 	DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
@@ -898,7 +944,7 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 void mpic_set_vector(unsigned int virq, unsigned int vector)
 {
 	struct mpic *mpic = mpic_from_irq(virq);
-	unsigned int src = mpic_irq_to_hw(virq);
+	unsigned int src = virq_to_hw(virq);
 	unsigned int vecpri;
 
 	DBG("mpic: set_vector(mpic:@%p,virq:%d,src:%d,vector:0x%x)\n",
@@ -916,7 +962,7 @@ void mpic_set_vector(unsigned int virq, unsigned int vector)
 void mpic_set_destination(unsigned int virq, unsigned int cpuid)
 {
 	struct mpic *mpic = mpic_from_irq(virq);
-	unsigned int src = mpic_irq_to_hw(virq);
+	unsigned int src = virq_to_hw(virq);
 
 	DBG("mpic: set_destination(mpic:@%p,virq:%d,src:%d,cpuid:0x%x)\n",
 	    mpic, virq, src, cpuid);
@@ -942,6 +988,12 @@ static struct irq_chip mpic_ipi_chip = {
 };
 #endif /* CONFIG_SMP */
 
+static struct irq_chip mpic_tm_chip = {
+	.irq_mask	= mpic_mask_tm,
+	.irq_unmask	= mpic_unmask_tm,
+	.irq_eoi	= mpic_end_irq,
+};
+
 #ifdef CONFIG_MPIC_U3_HT_IRQS
 static struct irq_chip mpic_irq_ht_chip = {
 	.irq_startup	= mpic_startup_ht_irq,
@@ -985,6 +1037,16 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq,
 	}
 #endif /* CONFIG_SMP */
 
+	if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) {
+		WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+
+		DBG("mpic: mapping as timer\n");
+		irq_set_chip_data(virq, mpic);
+		irq_set_chip_and_handler(virq, &mpic->hc_tm,
+					 handle_fasteoi_irq);
+		return 0;
+	}
+
 	if (hw >= mpic->irq_count)
 		return -EINVAL;
 
@@ -1025,6 +1087,7 @@ static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
 			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 
 {
+	struct mpic *mpic = h->host_data;
 	static unsigned char map_mpic_senses[4] = {
 		IRQ_TYPE_EDGE_RISING,
 		IRQ_TYPE_LEVEL_LOW,
@@ -1033,7 +1096,38 @@ static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
 	};
 
 	*out_hwirq = intspec[0];
-	if (intsize > 1) {
+	if (intsize >= 4 && (mpic->flags & MPIC_FSL)) {
+		/*
+		 * Freescale MPIC with extended intspec:
+		 * First two cells are as usual.  Third specifies
+		 * an "interrupt type".  Fourth is type-specific data.
+		 *
+		 * See Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
+		 */
+		switch (intspec[2]) {
+		case 0:
+		case 1: /* no EISR/EIMR support for now, treat as shared IRQ */
+			break;
+		case 2:
+			if (intspec[0] >= ARRAY_SIZE(mpic->ipi_vecs))
+				return -EINVAL;
+
+			*out_hwirq = mpic->ipi_vecs[intspec[0]];
+			break;
+		case 3:
+			if (intspec[0] >= ARRAY_SIZE(mpic->timer_vecs))
+				return -EINVAL;
+
+			*out_hwirq = mpic->timer_vecs[intspec[0]];
+			break;
+		default:
+			pr_debug("%s: unknown irq type %u\n",
+				 __func__, intspec[2]);
+			return -EINVAL;
+		}
+
+		*out_flags = map_mpic_senses[intspec[1] & 3];
+	} else if (intsize > 1) {
 		u32 mask = 0x3;
 
 		/* Apple invented a new race of encoding on machines with
@@ -1109,6 +1203,9 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->hc_ipi.name = name;
 #endif /* CONFIG_SMP */
 
+	mpic->hc_tm = mpic_tm_chip;
+	mpic->hc_tm.name = name;
+
 	mpic->flags = flags;
 	mpic->isu_size = isu_size;
 	mpic->irq_count = irq_count;
@@ -1119,10 +1216,14 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	else
 		intvec_top = 255;
 
-	mpic->timer_vecs[0] = intvec_top - 8;
-	mpic->timer_vecs[1] = intvec_top - 7;
-	mpic->timer_vecs[2] = intvec_top - 6;
-	mpic->timer_vecs[3] = intvec_top - 5;
+	mpic->timer_vecs[0] = intvec_top - 12;
+	mpic->timer_vecs[1] = intvec_top - 11;
+	mpic->timer_vecs[2] = intvec_top - 10;
+	mpic->timer_vecs[3] = intvec_top - 9;
+	mpic->timer_vecs[4] = intvec_top - 8;
+	mpic->timer_vecs[5] = intvec_top - 7;
+	mpic->timer_vecs[6] = intvec_top - 6;
+	mpic->timer_vecs[7] = intvec_top - 5;
 	mpic->ipi_vecs[0]   = intvec_top - 4;
 	mpic->ipi_vecs[1]   = intvec_top - 3;
 	mpic->ipi_vecs[2]   = intvec_top - 2;
@@ -1132,6 +1233,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	/* Check for "big-endian" in device-tree */
 	if (node && of_get_property(node, "big-endian", NULL) != NULL)
 		mpic->flags |= MPIC_BIG_ENDIAN;
+	if (node && of_device_is_compatible(node, "fsl,mpic"))
+		mpic->flags |= MPIC_FSL;
 
 	/* Look for protected sources */
 	if (node) {
@@ -1323,15 +1426,17 @@ void __init mpic_init(struct mpic *mpic)
 	/* Set current processor priority to max */
 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
 
-	/* Initialize timers: just disable them all */
+	/* Initialize timers to our reserved vectors and mask them for now */
 	for (i = 0; i < 4; i++) {
 		mpic_write(mpic->tmregs,
 			   i * MPIC_INFO(TIMER_STRIDE) +
-			   MPIC_INFO(TIMER_DESTINATION), 0);
+			   MPIC_INFO(TIMER_DESTINATION),
+			   1 << hard_smp_processor_id());
 		mpic_write(mpic->tmregs,
 			   i * MPIC_INFO(TIMER_STRIDE) +
 			   MPIC_INFO(TIMER_VECTOR_PRI),
 			   MPIC_VECPRI_MASK |
+			   (9 << MPIC_VECPRI_PRIORITY_SHIFT) |
 			   (mpic->timer_vecs[0] + i));
 	}
 
@@ -1427,7 +1532,7 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable)
 void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 {
 	struct mpic *mpic = mpic_find(irq);
-	unsigned int src = mpic_irq_to_hw(irq);
+	unsigned int src = virq_to_hw(irq);
 	unsigned long flags;
 	u32 reg;
 
@@ -1440,6 +1545,11 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_ipi_write(src - mpic->ipi_vecs[0],
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
+	} else if (mpic_is_tm(mpic, irq)) {
+		reg = mpic_tm_read(src - mpic->timer_vecs[0]) &
+			~MPIC_VECPRI_PRIORITY_MASK;
+		mpic_tm_write(src - mpic->timer_vecs[0],
+			      reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
 	} else {
 		reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI))
 			& ~MPIC_VECPRI_PRIORITY_MASK;
@@ -1619,46 +1729,28 @@ void mpic_request_ipis(void)
 	}
 }
 
-static void mpic_send_ipi(unsigned int ipi_no, const struct cpumask *cpu_mask)
+void smp_mpic_message_pass(int cpu, int msg)
 {
 	struct mpic *mpic = mpic_primary;
+	u32 physmask;
 
 	BUG_ON(mpic == NULL);
 
-#ifdef DEBUG_IPI
-	DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no);
-#endif
-
-	mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) +
-		       ipi_no * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE),
-		       mpic_physmask(cpumask_bits(cpu_mask)[0]));
-}
-
-void smp_mpic_message_pass(int target, int msg)
-{
-	cpumask_var_t tmp;
-
 	/* make sure we're sending something that translates to an IPI */
 	if ((unsigned int)msg > 3) {
 		printk("SMP %d: smp_message_pass: unknown msg %d\n",
 		       smp_processor_id(), msg);
 		return;
 	}
-	switch (target) {
-	case MSG_ALL:
-		mpic_send_ipi(msg, cpu_online_mask);
-		break;
-	case MSG_ALL_BUT_SELF:
-		alloc_cpumask_var(&tmp, GFP_NOWAIT);
-		cpumask_andnot(tmp, cpu_online_mask,
-			       cpumask_of(smp_processor_id()));
-		mpic_send_ipi(msg, tmp);
-		free_cpumask_var(tmp);
-		break;
-	default:
-		mpic_send_ipi(msg, cpumask_of(target));
-		break;
-	}
+
+#ifdef DEBUG_IPI
+	DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, msg);
+#endif
+
+	physmask = 1 << get_hard_smp_processor_id(cpu);
+
+	mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) +
+		       msg * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE), physmask);
 }
 
 int __init smp_mpic_probe(void)
@@ -1702,9 +1794,8 @@ void mpic_reset_core(int cpu)
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PM
-static int mpic_suspend(struct sys_device *dev, pm_message_t state)
+static void mpic_suspend_one(struct mpic *mpic)
 {
-	struct mpic *mpic = container_of(dev, struct mpic, sysdev);
 	int i;
 
 	for (i = 0; i < mpic->num_sources; i++) {
@@ -1713,13 +1804,22 @@ static int mpic_suspend(struct sys_device *dev, pm_message_t state)
 		mpic->save_data[i].dest =
 			mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION));
 	}
+}
+
+static int mpic_suspend(void)
+{
+	struct mpic *mpic = mpics;
+
+	while (mpic) {
+		mpic_suspend_one(mpic);
+		mpic = mpic->next;
+	}
 
 	return 0;
 }
 
-static int mpic_resume(struct sys_device *dev)
+static void mpic_resume_one(struct mpic *mpic)
 {
-	struct mpic *mpic = container_of(dev, struct mpic, sysdev);
 	int i;
 
 	for (i = 0; i < mpic->num_sources; i++) {
@@ -1746,33 +1846,28 @@ static int mpic_resume(struct sys_device *dev)
 	}
 #endif
 	} /* end for loop */
+}
 
-	return 0;
+static void mpic_resume(void)
+{
+	struct mpic *mpic = mpics;
+
+	while (mpic) {
+		mpic_resume_one(mpic);
+		mpic = mpic->next;
+	}
 }
-#endif
 
-static struct sysdev_class mpic_sysclass = {
-#ifdef CONFIG_PM
+static struct syscore_ops mpic_syscore_ops = {
 	.resume = mpic_resume,
 	.suspend = mpic_suspend,
-#endif
-	.name = "mpic",
 };
 
 static int mpic_init_sys(void)
 {
-	struct mpic *mpic = mpics;
-	int error, id = 0;
-
-	error = sysdev_class_register(&mpic_sysclass);
-
-	while (mpic && !error) {
-		mpic->sysdev.cls = &mpic_sysclass;
-		mpic->sysdev.id = id++;
-		error = sysdev_register(&mpic->sysdev);
-		mpic = mpic->next;
-	}
-	return error;
+	register_syscore_ops(&mpic_syscore_ops);
+	return 0;
 }
 
 device_initcall(mpic_init_sys);
+#endif
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
index e9c633c7c08..14d130268e7 100644
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ b/arch/powerpc/sysdev/mv64x60_pic.c
@@ -78,7 +78,7 @@ static struct irq_host *mv64x60_irq_host;
 
 static void mv64x60_mask_low(struct irq_data *d)
 {
-	int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+	int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
 	unsigned long flags;
 
 	spin_lock_irqsave(&mv64x60_lock, flags);
@@ -91,7 +91,7 @@ static void mv64x60_mask_low(struct irq_data *d)
 
 static void mv64x60_unmask_low(struct irq_data *d)
 {
-	int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+	int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
 	unsigned long flags;
 
 	spin_lock_irqsave(&mv64x60_lock, flags);
@@ -115,7 +115,7 @@ static struct irq_chip mv64x60_chip_low = {
 
 static void mv64x60_mask_high(struct irq_data *d)
 {
-	int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+	int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
 	unsigned long flags;
 
 	spin_lock_irqsave(&mv64x60_lock, flags);
@@ -128,7 +128,7 @@ static void mv64x60_mask_high(struct irq_data *d)
 
 static void mv64x60_unmask_high(struct irq_data *d)
 {
-	int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+	int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
 	unsigned long flags;
 
 	spin_lock_irqsave(&mv64x60_lock, flags);
@@ -152,7 +152,7 @@ static struct irq_chip mv64x60_chip_high = {
 
 static void mv64x60_mask_gpp(struct irq_data *d)
 {
-	int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+	int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
 	unsigned long flags;
 
 	spin_lock_irqsave(&mv64x60_lock, flags);
@@ -165,7 +165,7 @@ static void mv64x60_mask_gpp(struct irq_data *d)
 
 static void mv64x60_mask_ack_gpp(struct irq_data *d)
 {
-	int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+	int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
 	unsigned long flags;
 
 	spin_lock_irqsave(&mv64x60_lock, flags);
@@ -180,7 +180,7 @@ static void mv64x60_mask_ack_gpp(struct irq_data *d)
 
 static void mv64x60_unmask_gpp(struct irq_data *d)
 {
-	int level2 = irq_map[d->irq].hwirq & MV64x60_LEVEL2_MASK;
+	int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
 	unsigned long flags;
 
 	spin_lock_irqsave(&mv64x60_lock, flags);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 56d9e5deccb..c39a134e868 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -324,7 +324,7 @@
 #define PESDR0_460EX_IHS2		0x036D
 
 /*
- * 460SX addtional DCRs
+ * 460SX additional DCRs
  */
 #define PESDRn_460SX_RCEI		0x02
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 832d6924ad1..b2acda07220 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -197,12 +197,10 @@ static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
 	return irq_data_get_irq_chip_data(d);
 }
 
-#define virq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
-
 static void qe_ic_unmask_irq(struct irq_data *d)
 {
 	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-	unsigned int src = virq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 temp;
 
@@ -218,7 +216,7 @@ static void qe_ic_unmask_irq(struct irq_data *d)
 static void qe_ic_mask_irq(struct irq_data *d)
 {
 	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-	unsigned int src = virq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 temp;
 
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
new file mode 100644
index 00000000000..b2593ce30c9
--- /dev/null
+++ b/arch/powerpc/sysdev/scom.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2010 Benjamin Herrenschmidt, IBM Corp
+ *                <benh@kernel.crashing.org>
+ *     and        David Gibson, IBM Corporation.
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <asm/prom.h>
+#include <asm/scom.h>
+
+const struct scom_controller *scom_controller;
+EXPORT_SYMBOL_GPL(scom_controller);
+
+struct device_node *scom_find_parent(struct device_node *node)
+{
+	struct device_node *par, *tmp;
+	const u32 *p;
+
+	for (par = of_node_get(node); par;) {
+		if (of_get_property(par, "scom-controller", NULL))
+			break;
+		p = of_get_property(par, "scom-parent", NULL);
+		tmp = par;
+		if (p == NULL)
+			par = of_get_parent(par);
+		else
+			par = of_find_node_by_phandle(*p);
+		of_node_put(tmp);
+	}
+	return par;
+}
+EXPORT_SYMBOL_GPL(scom_find_parent);
+
+scom_map_t scom_map_device(struct device_node *dev, int index)
+{
+	struct device_node *parent;
+	unsigned int cells, size;
+	const u32 *prop;
+	u64 reg, cnt;
+	scom_map_t ret;
+
+	parent = scom_find_parent(dev);
+
+	if (parent == NULL)
+		return 0;
+
+	prop = of_get_property(parent, "#scom-cells", NULL);
+	cells = prop ? *prop : 1;
+
+	prop = of_get_property(dev, "scom-reg", &size);
+	if (!prop)
+		return 0;
+	size >>= 2;
+
+	if (index >= (size / (2*cells)))
+		return 0;
+
+	reg = of_read_number(&prop[index * cells * 2], cells);
+	cnt = of_read_number(&prop[index * cells * 2 + cells], cells);
+
+	ret = scom_map(parent, reg, cnt);
+	of_node_put(parent);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(scom_map_device);
+
+#ifdef CONFIG_SCOM_DEBUGFS
+struct scom_debug_entry {
+	struct device_node *dn;
+	unsigned long addr;
+	scom_map_t map;
+	spinlock_t lock;
+	char name[8];
+	struct debugfs_blob_wrapper blob;
+};
+
+static int scom_addr_set(void *data, u64 val)
+{
+	struct scom_debug_entry *ent = data;
+
+	ent->addr = 0;
+	scom_unmap(ent->map);
+
+	ent->map = scom_map(ent->dn, val, 1);
+	if (scom_map_ok(ent->map))
+		ent->addr = val;
+	else
+		return -EFAULT;
+
+	return 0;
+}
+
+static int scom_addr_get(void *data, u64 *val)
+{
+	struct scom_debug_entry *ent = data;
+	*val = ent->addr;
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(scom_addr_fops, scom_addr_get, scom_addr_set,
+			"0x%llx\n");
+
+static int scom_val_set(void *data, u64 val)
+{
+	struct scom_debug_entry *ent = data;
+
+	if (!scom_map_ok(ent->map))
+		return -EFAULT;
+
+	scom_write(ent->map, 0, val);
+
+	return 0;
+}
+
+static int scom_val_get(void *data, u64 *val)
+{
+	struct scom_debug_entry *ent = data;
+
+	if (!scom_map_ok(ent->map))
+		return -EFAULT;
+
+	*val = scom_read(ent->map, 0);
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(scom_val_fops, scom_val_get, scom_val_set,
+			"0x%llx\n");
+
+static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
+			       int i)
+{
+	struct scom_debug_entry *ent;
+	struct dentry *dir;
+
+	ent = kzalloc(sizeof(*ent), GFP_KERNEL);
+	if (!ent)
+		return -ENOMEM;
+
+	ent->dn = of_node_get(dn);
+	ent->map = SCOM_MAP_INVALID;
+	spin_lock_init(&ent->lock);
+	snprintf(ent->name, 8, "scom%d", i);
+	ent->blob.data = dn->full_name;
+	ent->blob.size = strlen(dn->full_name);
+
+	dir = debugfs_create_dir(ent->name, root);
+	if (!dir) {
+		of_node_put(dn);
+		kfree(ent);
+		return -1;
+	}
+
+	debugfs_create_file("addr", 0600, dir, ent, &scom_addr_fops);
+	debugfs_create_file("value", 0600, dir, ent, &scom_val_fops);
+	debugfs_create_blob("path", 0400, dir, &ent->blob);
+
+	return 0;
+}
+
+static int scom_debug_init(void)
+{
+	struct device_node *dn;
+	struct dentry *root;
+	int i, rc;
+
+	root = debugfs_create_dir("scom", powerpc_debugfs_root);
+	if (!root)
+		return -1;
+
+	i = rc = 0;
+	for_each_node_with_property(dn, "scom-controller")
+		rc |= scom_debug_init_one(root, dn, i++);
+
+	return rc;
+}
+device_initcall(scom_debug_init);
+#endif /* CONFIG_SCOM_DEBUGFS */
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 5d913851662..984cd202915 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -41,8 +41,6 @@
 #define UIC_VR		0x7
 #define UIC_VCR		0x8
 
-#define uic_irq_to_hw(virq)	(irq_map[virq].hwirq)
-
 struct uic *primary_uic;
 
 struct uic {
@@ -58,7 +56,7 @@ struct uic {
 static void uic_unmask_irq(struct irq_data *d)
 {
 	struct uic *uic = irq_data_get_irq_chip_data(d);
-	unsigned int src = uic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 er, sr;
 
@@ -76,7 +74,7 @@ static void uic_unmask_irq(struct irq_data *d)
 static void uic_mask_irq(struct irq_data *d)
 {
 	struct uic *uic = irq_data_get_irq_chip_data(d);
-	unsigned int src = uic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 er;
 
@@ -90,7 +88,7 @@ static void uic_mask_irq(struct irq_data *d)
 static void uic_ack_irq(struct irq_data *d)
 {
 	struct uic *uic = irq_data_get_irq_chip_data(d);
-	unsigned int src = uic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 
 	spin_lock_irqsave(&uic->lock, flags);
@@ -101,7 +99,7 @@ static void uic_ack_irq(struct irq_data *d)
 static void uic_mask_ack_irq(struct irq_data *d)
 {
 	struct uic *uic = irq_data_get_irq_chip_data(d);
-	unsigned int src = uic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 er, sr;
 
@@ -126,7 +124,7 @@ static void uic_mask_ack_irq(struct irq_data *d)
 static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
 	struct uic *uic = irq_data_get_irq_chip_data(d);
-	unsigned int src = uic_irq_to_hw(d->irq);
+	unsigned int src = irqd_to_hwirq(d);
 	unsigned long flags;
 	int trigger, polarity;
 	u32 tr, pr, mask;
diff --git a/arch/powerpc/sysdev/xics/Kconfig b/arch/powerpc/sysdev/xics/Kconfig
new file mode 100644
index 00000000000..0031eda320c
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/Kconfig
@@ -0,0 +1,13 @@
+config PPC_XICS
+       def_bool n
+       select PPC_SMP_MUXED_IPI
+
+config PPC_ICP_NATIVE
+       def_bool n
+
+config PPC_ICP_HV
+       def_bool n
+
+config PPC_ICS_RTAS
+       def_bool n
+
diff --git a/arch/powerpc/sysdev/xics/Makefile b/arch/powerpc/sysdev/xics/Makefile
new file mode 100644
index 00000000000..b75a6059337
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/Makefile
@@ -0,0 +1,6 @@
+subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
+
+obj-y				+= xics-common.o
+obj-$(CONFIG_PPC_ICP_NATIVE)	+= icp-native.o
+obj-$(CONFIG_PPC_ICP_HV)	+= icp-hv.o
+obj-$(CONFIG_PPC_ICS_RTAS)	+= ics-rtas.o
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
new file mode 100644
index 00000000000..9518d367a64
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2011 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/xics.h>
+#include <asm/io.h>
+#include <asm/hvcall.h>
+
+static inline unsigned int icp_hv_get_xirr(unsigned char cppr)
+{
+	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+	long rc;
+
+	rc = plpar_hcall(H_XIRR, retbuf, cppr);
+	if (rc != H_SUCCESS)
+		panic(" bad return code xirr - rc = %lx\n", rc);
+	return (unsigned int)retbuf[0];
+}
+
+static inline void icp_hv_set_xirr(unsigned int value)
+{
+	long rc = plpar_hcall_norets(H_EOI, value);
+	if (rc != H_SUCCESS)
+		panic("bad return code EOI - rc = %ld, value=%x\n", rc, value);
+}
+
+static inline void icp_hv_set_cppr(u8 value)
+{
+	long rc = plpar_hcall_norets(H_CPPR, value);
+	if (rc != H_SUCCESS)
+		panic("bad return code cppr - rc = %lx\n", rc);
+}
+
+static inline void icp_hv_set_qirr(int n_cpu , u8 value)
+{
+	long rc = plpar_hcall_norets(H_IPI, get_hard_smp_processor_id(n_cpu),
+				     value);
+	if (rc != H_SUCCESS)
+		panic("bad return code qirr - rc = %lx\n", rc);
+}
+
+static void icp_hv_eoi(struct irq_data *d)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+	iosync();
+	icp_hv_set_xirr((xics_pop_cppr() << 24) | hw_irq);
+}
+
+static void icp_hv_teardown_cpu(void)
+{
+	int cpu = smp_processor_id();
+
+	/* Clear any pending IPI */
+	icp_hv_set_qirr(cpu, 0xff);
+}
+
+static void icp_hv_flush_ipi(void)
+{
+	/* We take the ipi irq but and never return so we
+	 * need to EOI the IPI, but want to leave our priority 0
+	 *
+	 * should we check all the other interrupts too?
+	 * should we be flagging idle loop instead?
+	 * or creating some task to be scheduled?
+	 */
+
+	icp_hv_set_xirr((0x00 << 24) | XICS_IPI);
+}
+
+static unsigned int icp_hv_get_irq(void)
+{
+	unsigned int xirr = icp_hv_get_xirr(xics_cppr_top());
+	unsigned int vec = xirr & 0x00ffffff;
+	unsigned int irq;
+
+	if (vec == XICS_IRQ_SPURIOUS)
+		return NO_IRQ;
+
+	irq = irq_radix_revmap_lookup(xics_host, vec);
+	if (likely(irq != NO_IRQ)) {
+		xics_push_cppr(vec);
+		return irq;
+	}
+
+	/* We don't have a linux mapping, so have rtas mask it. */
+	xics_mask_unknown_vec(vec);
+
+	/* We might learn about it later, so EOI it */
+	icp_hv_set_xirr(xirr);
+
+	return NO_IRQ;
+}
+
+static void icp_hv_set_cpu_priority(unsigned char cppr)
+{
+	xics_set_base_cppr(cppr);
+	icp_hv_set_cppr(cppr);
+	iosync();
+}
+
+#ifdef CONFIG_SMP
+
+static void icp_hv_cause_ipi(int cpu, unsigned long data)
+{
+	icp_hv_set_qirr(cpu, IPI_PRIORITY);
+}
+
+static irqreturn_t icp_hv_ipi_action(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	icp_hv_set_qirr(cpu, 0xff);
+
+	return smp_ipi_demux();
+}
+
+#endif /* CONFIG_SMP */
+
+static const struct icp_ops icp_hv_ops = {
+	.get_irq	= icp_hv_get_irq,
+	.eoi		= icp_hv_eoi,
+	.set_priority	= icp_hv_set_cpu_priority,
+	.teardown_cpu	= icp_hv_teardown_cpu,
+	.flush_ipi	= icp_hv_flush_ipi,
+#ifdef CONFIG_SMP
+	.ipi_action	= icp_hv_ipi_action,
+	.cause_ipi	= icp_hv_cause_ipi,
+#endif
+};
+
+int icp_hv_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,ppc-xicp");
+	if (!np)
+		np = of_find_node_by_type(NULL,
+				    "PowerPC-External-Interrupt-Presentation");
+	if (!np)
+		return -ENODEV;
+
+	icp_ops = &icp_hv_ops;
+
+	return 0;
+}
+
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
new file mode 100644
index 00000000000..1f15ad43614
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright 2011 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/xics.h>
+
+struct icp_ipl {
+	union {
+		u32 word;
+		u8 bytes[4];
+	} xirr_poll;
+	union {
+		u32 word;
+		u8 bytes[4];
+	} xirr;
+	u32 dummy;
+	union {
+		u32 word;
+		u8 bytes[4];
+	} qirr;
+	u32 link_a;
+	u32 link_b;
+	u32 link_c;
+};
+
+static struct icp_ipl __iomem *icp_native_regs[NR_CPUS];
+
+static inline unsigned int icp_native_get_xirr(void)
+{
+	int cpu = smp_processor_id();
+
+	return in_be32(&icp_native_regs[cpu]->xirr.word);
+}
+
+static inline void icp_native_set_xirr(unsigned int value)
+{
+	int cpu = smp_processor_id();
+
+	out_be32(&icp_native_regs[cpu]->xirr.word, value);
+}
+
+static inline void icp_native_set_cppr(u8 value)
+{
+	int cpu = smp_processor_id();
+
+	out_8(&icp_native_regs[cpu]->xirr.bytes[0], value);
+}
+
+static inline void icp_native_set_qirr(int n_cpu, u8 value)
+{
+	out_8(&icp_native_regs[n_cpu]->qirr.bytes[0], value);
+}
+
+static void icp_native_set_cpu_priority(unsigned char cppr)
+{
+	xics_set_base_cppr(cppr);
+	icp_native_set_cppr(cppr);
+	iosync();
+}
+
+static void icp_native_eoi(struct irq_data *d)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+	iosync();
+	icp_native_set_xirr((xics_pop_cppr() << 24) | hw_irq);
+}
+
+static void icp_native_teardown_cpu(void)
+{
+	int cpu = smp_processor_id();
+
+	/* Clear any pending IPI */
+	icp_native_set_qirr(cpu, 0xff);
+}
+
+static void icp_native_flush_ipi(void)
+{
+	/* We take the ipi irq but and never return so we
+	 * need to EOI the IPI, but want to leave our priority 0
+	 *
+	 * should we check all the other interrupts too?
+	 * should we be flagging idle loop instead?
+	 * or creating some task to be scheduled?
+	 */
+
+	icp_native_set_xirr((0x00 << 24) | XICS_IPI);
+}
+
+static unsigned int icp_native_get_irq(void)
+{
+	unsigned int xirr = icp_native_get_xirr();
+	unsigned int vec = xirr & 0x00ffffff;
+	unsigned int irq;
+
+	if (vec == XICS_IRQ_SPURIOUS)
+		return NO_IRQ;
+
+	irq = irq_radix_revmap_lookup(xics_host, vec);
+	if (likely(irq != NO_IRQ)) {
+		xics_push_cppr(vec);
+		return irq;
+	}
+
+	/* We don't have a linux mapping, so have rtas mask it. */
+	xics_mask_unknown_vec(vec);
+
+	/* We might learn about it later, so EOI it */
+	icp_native_set_xirr(xirr);
+
+	return NO_IRQ;
+}
+
+#ifdef CONFIG_SMP
+
+static void icp_native_cause_ipi(int cpu, unsigned long data)
+{
+	icp_native_set_qirr(cpu, IPI_PRIORITY);
+}
+
+static irqreturn_t icp_native_ipi_action(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	icp_native_set_qirr(cpu, 0xff);
+
+	return smp_ipi_demux();
+}
+
+#endif /* CONFIG_SMP */
+
+static int __init icp_native_map_one_cpu(int hw_id, unsigned long addr,
+					 unsigned long size)
+{
+	char *rname;
+	int i, cpu = -1;
+
+	/* This may look gross but it's good enough for now, we don't quite
+	 * have a hard -> linux processor id matching.
+	 */
+	for_each_possible_cpu(i) {
+		if (!cpu_present(i))
+			continue;
+		if (hw_id == get_hard_smp_processor_id(i)) {
+			cpu = i;
+			break;
+		}
+	}
+
+	/* Fail, skip that CPU. Don't print, it's normal, some XICS come up
+	 * with way more entries in there than you have CPUs
+	 */
+	if (cpu == -1)
+		return 0;
+
+	rname = kasprintf(GFP_KERNEL, "CPU %d [0x%x] Interrupt Presentation",
+			  cpu, hw_id);
+
+	if (!request_mem_region(addr, size, rname)) {
+		pr_warning("icp_native: Could not reserve ICP MMIO"
+			   " for CPU %d, interrupt server #0x%x\n",
+			   cpu, hw_id);
+		return -EBUSY;
+	}
+
+	icp_native_regs[cpu] = ioremap(addr, size);
+	if (!icp_native_regs[cpu]) {
+		pr_warning("icp_native: Failed ioremap for CPU %d, "
+			   "interrupt server #0x%x, addr %#lx\n",
+			   cpu, hw_id, addr);
+		release_mem_region(addr, size);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int __init icp_native_init_one_node(struct device_node *np,
+					   unsigned int *indx)
+{
+	unsigned int ilen;
+	const u32 *ireg;
+	int i;
+	int reg_tuple_size;
+	int num_servers = 0;
+
+	/* This code does the theorically broken assumption that the interrupt
+	 * server numbers are the same as the hard CPU numbers.
+	 * This happens to be the case so far but we are playing with fire...
+	 * should be fixed one of these days. -BenH.
+	 */
+	ireg = of_get_property(np, "ibm,interrupt-server-ranges", &ilen);
+
+	/* Do that ever happen ? we'll know soon enough... but even good'old
+	 * f80 does have that property ..
+	 */
+	WARN_ON((ireg == NULL) || (ilen != 2*sizeof(u32)));
+
+	if (ireg) {
+		*indx = of_read_number(ireg, 1);
+		if (ilen >= 2*sizeof(u32))
+			num_servers = of_read_number(ireg + 1, 1);
+	}
+
+	ireg = of_get_property(np, "reg", &ilen);
+	if (!ireg) {
+		pr_err("icp_native: Can't find interrupt reg property");
+		return -1;
+	}
+
+	reg_tuple_size = (of_n_addr_cells(np) + of_n_size_cells(np)) * 4;
+	if (((ilen % reg_tuple_size) != 0)
+	    || (num_servers && (num_servers != (ilen / reg_tuple_size)))) {
+		pr_err("icp_native: ICP reg len (%d) != num servers (%d)",
+		       ilen / reg_tuple_size, num_servers);
+		return -1;
+	}
+
+	for (i = 0; i < (ilen / reg_tuple_size); i++) {
+		struct resource r;
+		int err;
+
+		err = of_address_to_resource(np, i, &r);
+		if (err) {
+			pr_err("icp_native: Could not translate ICP MMIO"
+			       " for interrupt server 0x%x (%d)\n", *indx, err);
+			return -1;
+		}
+
+		if (icp_native_map_one_cpu(*indx, r.start, r.end - r.start))
+			return -1;
+
+		(*indx)++;
+	}
+	return 0;
+}
+
+static const struct icp_ops icp_native_ops = {
+	.get_irq	= icp_native_get_irq,
+	.eoi		= icp_native_eoi,
+	.set_priority	= icp_native_set_cpu_priority,
+	.teardown_cpu	= icp_native_teardown_cpu,
+	.flush_ipi	= icp_native_flush_ipi,
+#ifdef CONFIG_SMP
+	.ipi_action	= icp_native_ipi_action,
+	.cause_ipi	= icp_native_cause_ipi,
+#endif
+};
+
+int icp_native_init(void)
+{
+	struct device_node *np;
+	u32 indx = 0;
+	int found = 0;
+
+	for_each_compatible_node(np, NULL, "ibm,ppc-xicp")
+		if (icp_native_init_one_node(np, &indx) == 0)
+			found = 1;
+	if (!found) {
+		for_each_node_by_type(np,
+			"PowerPC-External-Interrupt-Presentation") {
+				if (icp_native_init_one_node(np, &indx) == 0)
+					found = 1;
+		}
+	}
+
+	if (found == 0)
+		return -ENODEV;
+
+	icp_ops = &icp_native_ops;
+
+	return 0;
+}
diff --git a/arch/powerpc/sysdev/xics/ics-rtas.c b/arch/powerpc/sysdev/xics/ics-rtas.c
new file mode 100644
index 00000000000..c782f85cf7e
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/ics-rtas.c
@@ -0,0 +1,240 @@
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/msi.h>
+
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/xics.h>
+#include <asm/rtas.h>
+
+/* RTAS service tokens */
+static int ibm_get_xive;
+static int ibm_set_xive;
+static int ibm_int_on;
+static int ibm_int_off;
+
+static int ics_rtas_map(struct ics *ics, unsigned int virq);
+static void ics_rtas_mask_unknown(struct ics *ics, unsigned long vec);
+static long ics_rtas_get_server(struct ics *ics, unsigned long vec);
+static int ics_rtas_host_match(struct ics *ics, struct device_node *node);
+
+/* Only one global & state struct ics */
+static struct ics ics_rtas = {
+	.map		= ics_rtas_map,
+	.mask_unknown	= ics_rtas_mask_unknown,
+	.get_server	= ics_rtas_get_server,
+	.host_match	= ics_rtas_host_match,
+};
+
+static void ics_rtas_unmask_irq(struct irq_data *d)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	int call_status;
+	int server;
+
+	pr_devel("xics: unmask virq %d [hw 0x%x]\n", d->irq, hw_irq);
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return;
+
+	server = xics_get_irq_server(d->irq, d->affinity, 0);
+
+	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hw_irq, server,
+				DEFAULT_PRIORITY);
+	if (call_status != 0) {
+		printk(KERN_ERR
+			"%s: ibm_set_xive irq %u server %x returned %d\n",
+			__func__, hw_irq, server, call_status);
+		return;
+	}
+
+	/* Now unmask the interrupt (often a no-op) */
+	call_status = rtas_call(ibm_int_on, 1, 1, NULL, hw_irq);
+	if (call_status != 0) {
+		printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
+			__func__, hw_irq, call_status);
+		return;
+	}
+}
+
+static unsigned int ics_rtas_startup(struct irq_data *d)
+{
+#ifdef CONFIG_PCI_MSI
+	/*
+	 * The generic MSI code returns with the interrupt disabled on the
+	 * card, using the MSI mask bits. Firmware doesn't appear to unmask
+	 * at that level, so we do it here by hand.
+	 */
+	if (d->msi_desc)
+		unmask_msi_irq(d);
+#endif
+	/* unmask it */
+	ics_rtas_unmask_irq(d);
+	return 0;
+}
+
+static void ics_rtas_mask_real_irq(unsigned int hw_irq)
+{
+	int call_status;
+
+	if (hw_irq == XICS_IPI)
+		return;
+
+	call_status = rtas_call(ibm_int_off, 1, 1, NULL, hw_irq);
+	if (call_status != 0) {
+		printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
+			__func__, hw_irq, call_status);
+		return;
+	}
+
+	/* Have to set XIVE to 0xff to be able to remove a slot */
+	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hw_irq,
+				xics_default_server, 0xff);
+	if (call_status != 0) {
+		printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
+			__func__, hw_irq, call_status);
+		return;
+	}
+}
+
+static void ics_rtas_mask_irq(struct irq_data *d)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+	pr_devel("xics: mask virq %d [hw 0x%x]\n", d->irq, hw_irq);
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return;
+	ics_rtas_mask_real_irq(hw_irq);
+}
+
+static int ics_rtas_set_affinity(struct irq_data *d,
+				 const struct cpumask *cpumask,
+				 bool force)
+{
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	int status;
+	int xics_status[2];
+	int irq_server;
+
+	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
+		return -1;
+
+	status = rtas_call(ibm_get_xive, 1, 3, xics_status, hw_irq);
+
+	if (status) {
+		printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
+			__func__, hw_irq, status);
+		return -1;
+	}
+
+	irq_server = xics_get_irq_server(d->irq, cpumask, 1);
+	if (irq_server == -1) {
+		char cpulist[128];
+		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
+		printk(KERN_WARNING
+			"%s: No online cpus in the mask %s for irq %d\n",
+			__func__, cpulist, d->irq);
+		return -1;
+	}
+
+	status = rtas_call(ibm_set_xive, 3, 1, NULL,
+			   hw_irq, irq_server, xics_status[1]);
+
+	if (status) {
+		printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
+			__func__, hw_irq, status);
+		return -1;
+	}
+
+	return IRQ_SET_MASK_OK;
+}
+
+static struct irq_chip ics_rtas_irq_chip = {
+	.name = "XICS",
+	.irq_startup = ics_rtas_startup,
+	.irq_mask = ics_rtas_mask_irq,
+	.irq_unmask = ics_rtas_unmask_irq,
+	.irq_eoi = NULL, /* Patched at init time */
+	.irq_set_affinity = ics_rtas_set_affinity
+};
+
+static int ics_rtas_map(struct ics *ics, unsigned int virq)
+{
+	unsigned int hw_irq = (unsigned int)virq_to_hw(virq);
+	int status[2];
+	int rc;
+
+	if (WARN_ON(hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS))
+		return -EINVAL;
+
+	/* Check if RTAS knows about this interrupt */
+	rc = rtas_call(ibm_get_xive, 1, 3, status, hw_irq);
+	if (rc)
+		return -ENXIO;
+
+	irq_set_chip_and_handler(virq, &ics_rtas_irq_chip, handle_fasteoi_irq);
+	irq_set_chip_data(virq, &ics_rtas);
+
+	return 0;
+}
+
+static void ics_rtas_mask_unknown(struct ics *ics, unsigned long vec)
+{
+	ics_rtas_mask_real_irq(vec);
+}
+
+static long ics_rtas_get_server(struct ics *ics, unsigned long vec)
+{
+	int rc, status[2];
+
+	rc = rtas_call(ibm_get_xive, 1, 3, status, vec);
+	if (rc)
+		return -1;
+	return status[0];
+}
+
+static int ics_rtas_host_match(struct ics *ics, struct device_node *node)
+{
+	/* IBM machines have interrupt parents of various funky types for things
+	 * like vdevices, events, etc... The trick we use here is to match
+	 * everything here except the legacy 8259 which is compatible "chrp,iic"
+	 */
+	return !of_device_is_compatible(node, "chrp,iic");
+}
+
+int ics_rtas_init(void)
+{
+	ibm_get_xive = rtas_token("ibm,get-xive");
+	ibm_set_xive = rtas_token("ibm,set-xive");
+	ibm_int_on  = rtas_token("ibm,int-on");
+	ibm_int_off = rtas_token("ibm,int-off");
+
+	/* We enable the RTAS "ICS" if RTAS is present with the
+	 * appropriate tokens
+	 */
+	if (ibm_get_xive == RTAS_UNKNOWN_SERVICE ||
+	    ibm_set_xive == RTAS_UNKNOWN_SERVICE)
+		return -ENODEV;
+
+	/* We need to patch our irq chip's EOI to point to the
+	 * right ICP
+	 */
+	ics_rtas_irq_chip.irq_eoi = icp_ops->eoi;
+
+	/* Register ourselves */
+	xics_register_ics(&ics_rtas);
+
+	return 0;
+}
+
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
new file mode 100644
index 00000000000..445c5a01b76
--- /dev/null
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -0,0 +1,443 @@
+/*
+ * Copyright 2011 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+#include <linux/types.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/errno.h>
+#include <asm/rtas.h>
+#include <asm/xics.h>
+#include <asm/firmware.h>
+
+/* Globals common to all ICP/ICS implementations */
+const struct icp_ops	*icp_ops;
+
+unsigned int xics_default_server		= 0xff;
+unsigned int xics_default_distrib_server	= 0;
+unsigned int xics_interrupt_server_size		= 8;
+
+DEFINE_PER_CPU(struct xics_cppr, xics_cppr);
+
+struct irq_host *xics_host;
+
+static LIST_HEAD(ics_list);
+
+void xics_update_irq_servers(void)
+{
+	int i, j;
+	struct device_node *np;
+	u32 ilen;
+	const u32 *ireg;
+	u32 hcpuid;
+
+	/* Find the server numbers for the boot cpu. */
+	np = of_get_cpu_node(boot_cpuid, NULL);
+	BUG_ON(!np);
+
+	hcpuid = get_hard_smp_processor_id(boot_cpuid);
+	xics_default_server = xics_default_distrib_server = hcpuid;
+
+	pr_devel("xics: xics_default_server = 0x%x\n", xics_default_server);
+
+	ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
+	if (!ireg) {
+		of_node_put(np);
+		return;
+	}
+
+	i = ilen / sizeof(int);
+
+	/* Global interrupt distribution server is specified in the last
+	 * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
+	 * entry fom this property for current boot cpu id and use it as
+	 * default distribution server
+	 */
+	for (j = 0; j < i; j += 2) {
+		if (ireg[j] == hcpuid) {
+			xics_default_distrib_server = ireg[j+1];
+			break;
+		}
+	}
+	pr_devel("xics: xics_default_distrib_server = 0x%x\n",
+		 xics_default_distrib_server);
+	of_node_put(np);
+}
+
+/* GIQ stuff, currently only supported on RTAS setups, will have
+ * to be sorted properly for bare metal
+ */
+void xics_set_cpu_giq(unsigned int gserver, unsigned int join)
+{
+#ifdef CONFIG_PPC_RTAS
+	int index;
+	int status;
+
+	if (!rtas_indicator_present(GLOBAL_INTERRUPT_QUEUE, NULL))
+		return;
+
+	index = (1UL << xics_interrupt_server_size) - 1 - gserver;
+
+	status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, index, join);
+
+	WARN(status < 0, "set-indicator(%d, %d, %u) returned %d\n",
+	     GLOBAL_INTERRUPT_QUEUE, index, join, status);
+#endif
+}
+
+void xics_setup_cpu(void)
+{
+	icp_ops->set_priority(LOWEST_PRIORITY);
+
+	xics_set_cpu_giq(xics_default_distrib_server, 1);
+}
+
+void xics_mask_unknown_vec(unsigned int vec)
+{
+	struct ics *ics;
+
+	pr_err("Interrupt 0x%x (real) is invalid, disabling it.\n", vec);
+
+	list_for_each_entry(ics, &ics_list, link)
+		ics->mask_unknown(ics, vec);
+}
+
+
+#ifdef CONFIG_SMP
+
+static void xics_request_ipi(void)
+{
+	unsigned int ipi;
+
+	ipi = irq_create_mapping(xics_host, XICS_IPI);
+	BUG_ON(ipi == NO_IRQ);
+
+	/*
+	 * IPIs are marked IRQF_DISABLED as they must run with irqs
+	 * disabled, and PERCPU.  The handler was set in map.
+	 */
+	BUG_ON(request_irq(ipi, icp_ops->ipi_action,
+			   IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL));
+}
+
+int __init xics_smp_probe(void)
+{
+	/* Setup cause_ipi callback  based on which ICP is used */
+	smp_ops->cause_ipi = icp_ops->cause_ipi;
+
+	/* Register all the IPIs */
+	xics_request_ipi();
+
+	return cpumask_weight(cpu_possible_mask);
+}
+
+#endif /* CONFIG_SMP */
+
+void xics_teardown_cpu(void)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	/*
+	 * we have to reset the cppr index to 0 because we're
+	 * not going to return from the IPI
+	 */
+	os_cppr->index = 0;
+	icp_ops->set_priority(0);
+	icp_ops->teardown_cpu();
+}
+
+void xics_kexec_teardown_cpu(int secondary)
+{
+	xics_teardown_cpu();
+
+	icp_ops->flush_ipi();
+
+	/*
+	 * Some machines need to have at least one cpu in the GIQ,
+	 * so leave the master cpu in the group.
+	 */
+	if (secondary)
+		xics_set_cpu_giq(xics_default_distrib_server, 0);
+}
+
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+/* Interrupts are disabled. */
+void xics_migrate_irqs_away(void)
+{
+	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
+	unsigned int irq, virq;
+
+	/* If we used to be the default server, move to the new "boot_cpuid" */
+	if (hw_cpu == xics_default_server)
+		xics_update_irq_servers();
+
+	/* Reject any interrupt that was queued to us... */
+	icp_ops->set_priority(0);
+
+	/* Remove ourselves from the global interrupt queue */
+	xics_set_cpu_giq(xics_default_distrib_server, 0);
+
+	/* Allow IPIs again... */
+	icp_ops->set_priority(DEFAULT_PRIORITY);
+
+	for_each_irq(virq) {
+		struct irq_desc *desc;
+		struct irq_chip *chip;
+		long server;
+		unsigned long flags;
+		struct ics *ics;
+
+		/* We can't set affinity on ISA interrupts */
+		if (virq < NUM_ISA_INTERRUPTS)
+			continue;
+		if (!virq_is_host(virq, xics_host))
+			continue;
+		irq = (unsigned int)virq_to_hw(virq);
+		/* We need to get IPIs still. */
+		if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+			continue;
+		desc = irq_to_desc(virq);
+		/* We only need to migrate enabled IRQS */
+		if (!desc || !desc->action)
+			continue;
+		chip = irq_desc_get_chip(desc);
+		if (!chip || !chip->irq_set_affinity)
+			continue;
+
+		raw_spin_lock_irqsave(&desc->lock, flags);
+
+		/* Locate interrupt server */
+		server = -1;
+		ics = irq_get_chip_data(virq);
+		if (ics)
+			server = ics->get_server(ics, irq);
+		if (server < 0) {
+			printk(KERN_ERR "%s: Can't find server for irq %d\n",
+			       __func__, irq);
+			goto unlock;
+		}
+
+		/* We only support delivery to all cpus or to one cpu.
+		 * The irq has to be migrated only in the single cpu
+		 * case.
+		 */
+		if (server != hw_cpu)
+			goto unlock;
+
+		/* This is expected during cpu offline. */
+		if (cpu_online(cpu))
+			pr_warning("IRQ %u affinity broken off cpu %u\n",
+			       virq, cpu);
+
+		/* Reset affinity to all cpus */
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+		irq_set_affinity(virq, cpu_all_mask);
+		continue;
+unlock:
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+	}
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+#ifdef CONFIG_SMP
+/*
+ * For the moment we only implement delivery to all cpus or one cpu.
+ *
+ * If the requested affinity is cpu_all_mask, we set global affinity.
+ * If not we set it to the first cpu in the mask, even if multiple cpus
+ * are set. This is so things like irqbalance (which set core and package
+ * wide affinities) do the right thing.
+ *
+ * We need to fix this to implement support for the links
+ */
+int xics_get_irq_server(unsigned int virq, const struct cpumask *cpumask,
+			unsigned int strict_check)
+{
+
+	if (!distribute_irqs)
+		return xics_default_server;
+
+	if (!cpumask_subset(cpu_possible_mask, cpumask)) {
+		int server = cpumask_first_and(cpu_online_mask, cpumask);
+
+		if (server < nr_cpu_ids)
+			return get_hard_smp_processor_id(server);
+
+		if (strict_check)
+			return -1;
+	}
+
+	/*
+	 * Workaround issue with some versions of JS20 firmware that
+	 * deliver interrupts to cpus which haven't been started. This
+	 * happens when using the maxcpus= boot option.
+	 */
+	if (cpumask_equal(cpu_online_mask, cpu_present_mask))
+		return xics_default_distrib_server;
+
+	return xics_default_server;
+}
+#endif /* CONFIG_SMP */
+
+static int xics_host_match(struct irq_host *h, struct device_node *node)
+{
+	struct ics *ics;
+
+	list_for_each_entry(ics, &ics_list, link)
+		if (ics->host_match(ics, node))
+			return 1;
+
+	return 0;
+}
+
+/* Dummies */
+static void xics_ipi_unmask(struct irq_data *d) { }
+static void xics_ipi_mask(struct irq_data *d) { }
+
+static struct irq_chip xics_ipi_chip = {
+	.name = "XICS",
+	.irq_eoi = NULL, /* Patched at init time */
+	.irq_mask = xics_ipi_mask,
+	.irq_unmask = xics_ipi_unmask,
+};
+
+static int xics_host_map(struct irq_host *h, unsigned int virq,
+			 irq_hw_number_t hw)
+{
+	struct ics *ics;
+
+	pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+
+	/* Insert the interrupt mapping into the radix tree for fast lookup */
+	irq_radix_revmap_insert(xics_host, virq, hw);
+
+	/* They aren't all level sensitive but we just don't really know */
+	irq_set_status_flags(virq, IRQ_LEVEL);
+
+	/* Don't call into ICS for IPIs */
+	if (hw == XICS_IPI) {
+		irq_set_chip_and_handler(virq, &xics_ipi_chip,
+					 handle_percpu_irq);
+		return 0;
+	}
+
+	/* Let the ICS setup the chip data */
+	list_for_each_entry(ics, &ics_list, link)
+		if (ics->map(ics, virq) == 0)
+			return 0;
+
+	return -EINVAL;
+}
+
+static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
+			   const u32 *intspec, unsigned int intsize,
+			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+	/* Current xics implementation translates everything
+	 * to level. It is not technically right for MSIs but this
+	 * is irrelevant at this point. We might get smarter in the future
+	 */
+	*out_hwirq = intspec[0];
+	*out_flags = IRQ_TYPE_LEVEL_LOW;
+
+	return 0;
+}
+
+static struct irq_host_ops xics_host_ops = {
+	.match = xics_host_match,
+	.map = xics_host_map,
+	.xlate = xics_host_xlate,
+};
+
+static void __init xics_init_host(void)
+{
+	xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops,
+				   XICS_IRQ_SPURIOUS);
+	BUG_ON(xics_host == NULL);
+	irq_set_default_host(xics_host);
+}
+
+void __init xics_register_ics(struct ics *ics)
+{
+	list_add(&ics->link, &ics_list);
+}
+
+static void __init xics_get_server_size(void)
+{
+	struct device_node *np;
+	const u32 *isize;
+
+	/* We fetch the interrupt server size from the first ICS node
+	 * we find if any
+	 */
+	np = of_find_compatible_node(NULL, NULL, "ibm,ppc-xics");
+	if (!np)
+		return;
+	isize = of_get_property(np, "ibm,interrupt-server#-size", NULL);
+	if (!isize)
+		return;
+	xics_interrupt_server_size = *isize;
+	of_node_put(np);
+}
+
+void __init xics_init(void)
+{
+	int rc = -1;
+
+	/* Fist locate ICP */
+#ifdef CONFIG_PPC_ICP_HV
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		rc = icp_hv_init();
+#endif
+#ifdef CONFIG_PPC_ICP_NATIVE
+	if (rc < 0)
+		rc = icp_native_init();
+#endif
+	if (rc < 0) {
+		pr_warning("XICS: Cannot find a Presentation Controller !\n");
+		return;
+	}
+
+	/* Copy get_irq callback over to ppc_md */
+	ppc_md.get_irq = icp_ops->get_irq;
+
+	/* Patch up IPI chip EOI */
+	xics_ipi_chip.irq_eoi = icp_ops->eoi;
+
+	/* Now locate ICS */
+#ifdef CONFIG_PPC_ICS_RTAS
+	rc = ics_rtas_init();
+#endif
+	if (rc < 0)
+		pr_warning("XICS: Cannot find a Source Controller !\n");
+
+	/* Initialize common bits */
+	xics_get_server_size();
+	xics_update_irq_servers();
+	xics_init_host();
+	xics_setup_cpu();
+}
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 0a13fc19e28..6183799754a 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -71,7 +71,7 @@ static unsigned char xilinx_intc_map_senses[] = {
  */
 static void xilinx_intc_mask(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void * regs = irq_data_get_irq_chip_data(d);
 	pr_debug("mask: %d\n", irq);
 	out_be32(regs + XINTC_CIE, 1 << irq);
@@ -87,7 +87,7 @@ static int xilinx_intc_set_type(struct irq_data *d, unsigned int flow_type)
  */
 static void xilinx_intc_level_unmask(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void * regs = irq_data_get_irq_chip_data(d);
 	pr_debug("unmask: %d\n", irq);
 	out_be32(regs + XINTC_SIE, 1 << irq);
@@ -112,7 +112,7 @@ static struct irq_chip xilinx_intc_level_irqchip = {
  */
 static void xilinx_intc_edge_unmask(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void *regs = irq_data_get_irq_chip_data(d);
 	pr_debug("unmask: %d\n", irq);
 	out_be32(regs + XINTC_SIE, 1 << irq);
@@ -120,7 +120,7 @@ static void xilinx_intc_edge_unmask(struct irq_data *d)
 
 static void xilinx_intc_edge_ack(struct irq_data *d)
 {
-	int irq = virq_to_hw(d->irq);
+	int irq = irqd_to_hwirq(d);
 	void * regs = irq_data_get_irq_chip_data(d);
 	pr_debug("ack: %d\n", irq);
 	out_be32(regs + XINTC_IAR, 1 << irq);
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 33794c1d92c..42541bbcc7f 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -334,7 +334,7 @@ static void release_output_lock(void)
 
 int cpus_are_in_xmon(void)
 {
-	return !cpus_empty(cpus_in_xmon);
+	return !cpumask_empty(&cpus_in_xmon);
 }
 #endif
 
@@ -373,7 +373,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 
 #ifdef CONFIG_SMP
 	cpu = smp_processor_id();
-	if (cpu_isset(cpu, cpus_in_xmon)) {
+	if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
 		get_output_lock();
 		excprint(regs);
 		printf("cpu 0x%x: Exception %lx %s in xmon, "
@@ -396,10 +396,10 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 	}
 
 	xmon_fault_jmp[cpu] = recurse_jmp;
-	cpu_set(cpu, cpus_in_xmon);
+	cpumask_set_cpu(cpu, &cpus_in_xmon);
 
 	bp = NULL;
-	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF))
+	if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT))
 		bp = at_breakpoint(regs->nip);
 	if (bp || unrecoverable_excp(regs))
 		fromipi = 0;
@@ -437,10 +437,10 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 		xmon_owner = cpu;
 		mb();
 		if (ncpus > 1) {
-			smp_send_debugger_break(MSG_ALL_BUT_SELF);
+			smp_send_debugger_break();
 			/* wait for other cpus to come in */
 			for (timeout = 100000000; timeout != 0; --timeout) {
-				if (cpus_weight(cpus_in_xmon) >= ncpus)
+				if (cpumask_weight(&cpus_in_xmon) >= ncpus)
 					break;
 				barrier();
 			}
@@ -484,7 +484,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 		}
 	}
  leave:
-	cpu_clear(cpu, cpus_in_xmon);
+	cpumask_clear_cpu(cpu, &cpus_in_xmon);
 	xmon_fault_jmp[cpu] = NULL;
 #else
 	/* UP is simple... */
@@ -529,7 +529,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 		}
 	}
 #else
-	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
+	if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) {
 		bp = at_breakpoint(regs->nip);
 		if (bp != NULL) {
 			int stepped = emulate_step(regs, bp->instr[0]);
@@ -578,7 +578,7 @@ static int xmon_bpt(struct pt_regs *regs)
 	struct bpt *bp;
 	unsigned long offset;
 
-	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
+	if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
 		return 0;
 
 	/* Are we at the trap at bp->instr[1] for some bp? */
@@ -609,7 +609,7 @@ static int xmon_sstep(struct pt_regs *regs)
 
 static int xmon_dabr_match(struct pt_regs *regs)
 {
-	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
+	if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
 		return 0;
 	if (dabr.enabled == 0)
 		return 0;
@@ -619,7 +619,7 @@ static int xmon_dabr_match(struct pt_regs *regs)
 
 static int xmon_iabr_match(struct pt_regs *regs)
 {
-	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
+	if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
 		return 0;
 	if (iabr == NULL)
 		return 0;
@@ -630,7 +630,7 @@ static int xmon_iabr_match(struct pt_regs *regs)
 static int xmon_ipi(struct pt_regs *regs)
 {
 #ifdef CONFIG_SMP
-	if (in_xmon && !cpu_isset(smp_processor_id(), cpus_in_xmon))
+	if (in_xmon && !cpumask_test_cpu(smp_processor_id(), &cpus_in_xmon))
 		xmon_core(regs, 1);
 #endif
 	return 0;
@@ -644,7 +644,7 @@ static int xmon_fault_handler(struct pt_regs *regs)
 	if (in_xmon && catch_memory_errors)
 		handle_fault(regs);	/* doesn't return */
 
-	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
+	if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) {
 		bp = in_breakpoint_table(regs->nip, &offset);
 		if (bp != NULL) {
 			regs->nip = bp->address + offset;
@@ -929,7 +929,7 @@ static int do_step(struct pt_regs *regs)
 	int stepped;
 
 	/* check we are in 64-bit kernel mode, translation enabled */
-	if ((regs->msr & (MSR_SF|MSR_PR|MSR_IR)) == (MSR_SF|MSR_IR)) {
+	if ((regs->msr & (MSR_64BIT|MSR_PR|MSR_IR)) == (MSR_64BIT|MSR_IR)) {
 		if (mread(regs->nip, &instr, 4) == 4) {
 			stepped = emulate_step(regs, instr);
 			if (stepped < 0) {
@@ -976,7 +976,7 @@ static int cpu_cmd(void)
 		printf("cpus stopped:");
 		count = 0;
 		for (cpu = 0; cpu < NR_CPUS; ++cpu) {
-			if (cpu_isset(cpu, cpus_in_xmon)) {
+			if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
 				if (count == 0)
 					printf(" %x", cpu);
 				++count;
@@ -992,7 +992,7 @@ static int cpu_cmd(void)
 		return 0;
 	}
 	/* try to switch to cpu specified */
-	if (!cpu_isset(cpu, cpus_in_xmon)) {
+	if (!cpumask_test_cpu(cpu, &cpus_in_xmon)) {
 		printf("cpu 0x%x isn't in xmon\n", cpu);
 		return 0;
 	}
@@ -1497,6 +1497,10 @@ static void prregs(struct pt_regs *fp)
 #endif
 	printf("pc  = ");
 	xmon_print_symbol(fp->nip, " ", "\n");
+	if (TRAP(fp) != 0xc00 && cpu_has_feature(CPU_FTR_CFAR)) {
+		printf("cfar= ");
+		xmon_print_symbol(fp->orig_gpr3, " ", "\n");
+	}
 	printf("lr  = ");
 	xmon_print_symbol(fp->link, " ", "\n");
 	printf("msr = "REG"   cr  = %.8lx\n", fp->msr, fp->ccr);
@@ -2663,7 +2667,7 @@ static void dump_stab(void)
 
 void dump_segments(void)
 {
-	if (cpu_has_feature(CPU_FTR_SLB))
+	if (mmu_has_feature(MMU_FTR_SLB))
 		dump_slb();
 	else
 		dump_stab();
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2508a6f3158..4a7f14079e0 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -88,6 +88,7 @@ config S390
 	select HAVE_KERNEL_XZ
 	select HAVE_GET_USER_PAGES_FAST
 	select HAVE_ARCH_MUTEX_CPU_RELAX
+	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
 	select ARCH_INLINE_SPIN_TRYLOCK
 	select ARCH_INLINE_SPIN_TRYLOCK_BH
 	select ARCH_INLINE_SPIN_LOCK
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index 975e3ab13cb..8b16c479585 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -76,7 +76,7 @@ static void prng_seed(int nbytes)
 
 	/* Add the entropy */
 	while (nbytes >= 8) {
-		*((__u64 *)parm_block) ^= *((__u64 *)buf+i*8);
+		*((__u64 *)parm_block) ^= *((__u64 *)(buf+i));
 		prng_add_entropy();
 		i += 8;
 		nbytes -= 8;
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 5c5ba10384c..d9db13810d1 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -9,7 +9,7 @@
  *
  * Atomic operations that C can't guarantee us.
  * Useful for resource counting etc.
- * s390 uses 'Compare And Swap' for atomicity in SMP enviroment.
+ * s390 uses 'Compare And Swap' for atomicity in SMP environment.
  *
  */
 
diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h
index 43a5c78046d..3e20383d092 100644
--- a/arch/s390/include/asm/cacheflush.h
+++ b/arch/s390/include/asm/cacheflush.h
@@ -11,5 +11,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable);
 int set_memory_ro(unsigned long addr, int numpages);
 int set_memory_rw(unsigned long addr, int numpages);
 int set_memory_nx(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
 
 #endif /* _S390_CACHEFLUSH_H */
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index e34347d567a..fc50a3342da 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -183,7 +183,7 @@ struct esw3 {
  * The irb that is handed to the device driver when an interrupt occurs. For
  * solicited interrupts, the common I/O layer already performs checks whether
  * a field is valid; a field not being valid is always passed as %0.
- * If a unit check occured, @ecw may contain sense data; this is retrieved
+ * If a unit check occurred, @ecw may contain sense data; this is retrieved
  * by the common I/O layer itself if the device doesn't support concurrent
  * sense (so that the device driver never needs to perform basic sene itself).
  * For unsolicited interrupts, the irb is passed as-is (expect for sense data,
diff --git a/arch/s390/include/asm/diag.h b/arch/s390/include/asm/diag.h
index 72b2e2f2d32..7e91c58072e 100644
--- a/arch/s390/include/asm/diag.h
+++ b/arch/s390/include/asm/diag.h
@@ -9,9 +9,22 @@
 #define _ASM_S390_DIAG_H
 
 /*
- * Diagnose 10: Release pages
+ * Diagnose 10: Release page range
  */
-extern void diag10(unsigned long addr);
+static inline void diag10_range(unsigned long start_pfn, unsigned long num_pfn)
+{
+	unsigned long start_addr, end_addr;
+
+	start_addr = start_pfn << PAGE_SHIFT;
+	end_addr = (start_pfn + num_pfn - 1) << PAGE_SHIFT;
+
+	asm volatile(
+		"0:	diag	%0,%1,0x10\n"
+		"1:\n"
+		EX_TABLE(0b, 1b)
+		EX_TABLE(1b, 1b)
+		: : "a" (start_addr), "a" (end_addr));
+}
 
 /*
  * Diagnose 14: Input spool file manipulation
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index 3c29be4836e..b7931faaef6 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -11,15 +11,13 @@ struct dyn_arch_ftrace { };
 
 #ifdef CONFIG_64BIT
 #define MCOUNT_INSN_SIZE  12
-#define MCOUNT_OFFSET	   8
 #else
 #define MCOUNT_INSN_SIZE  20
-#define MCOUNT_OFFSET	   4
 #endif
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
-	return addr - MCOUNT_OFFSET;
+	return addr;
 }
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/s390/include/asm/jump_label.h b/arch/s390/include/asm/jump_label.h
new file mode 100644
index 00000000000..95a6cf2b5b6
--- /dev/null
+++ b/arch/s390/include/asm/jump_label.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_S390_JUMP_LABEL_H
+#define _ASM_S390_JUMP_LABEL_H
+
+#include <linux/types.h>
+
+#define JUMP_LABEL_NOP_SIZE 6
+
+#ifdef CONFIG_64BIT
+#define ASM_PTR ".quad"
+#define ASM_ALIGN ".balign 8"
+#else
+#define ASM_PTR ".long"
+#define ASM_ALIGN ".balign 4"
+#endif
+
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+	asm goto("0:	brcl 0,0\n"
+		".pushsection __jump_table, \"aw\"\n"
+		ASM_ALIGN "\n"
+		ASM_PTR " 0b, %l[label], %0\n"
+		".popsection\n"
+		: : "X" (key) : : label);
+	return false;
+label:
+	return true;
+}
+
+typedef unsigned long jump_label_t;
+
+struct jump_entry {
+	jump_label_t code;
+	jump_label_t target;
+	jump_label_t key;
+};
+
+#endif
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index a6f0e7cc9cd..8c277caa8d3 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -23,7 +23,7 @@ static inline int init_new_context(struct task_struct *tsk,
 #ifdef CONFIG_64BIT
 	mm->context.asce_bits |= _ASCE_TYPE_REGION3;
 #endif
-	if (current->mm->context.alloc_pgste) {
+	if (current->mm && current->mm->context.alloc_pgste) {
 		/*
 		 * alloc_pgste indicates, that any NEW context will be created
 		 * with extended page tables. The old context is unchanged. The
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 64230bc392f..5ff15dacb57 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -23,7 +23,7 @@ CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o setup.o \
 	    processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
 	    s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \
-	    vdso.o vtime.o sysinfo.o nmi.o sclp.o
+	    vdso.o vtime.o sysinfo.o nmi.o sclp.o jump_label.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c
index c032d11da8a..8237fc07ac7 100644
--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -9,27 +9,6 @@
 #include <asm/diag.h>
 
 /*
- * Diagnose 10: Release pages
- */
-void diag10(unsigned long addr)
-{
-	if (addr >= 0x7ff00000)
-		return;
-	asm volatile(
-#ifdef CONFIG_64BIT
-		"	sam31\n"
-		"	diag	%0,%0,0x10\n"
-		"0:	sam64\n"
-#else
-		"	diag	%0,%0,0x10\n"
-		"0:\n"
-#endif
-		EX_TABLE(0b, 0b)
-		: : "a" (addr));
-}
-EXPORT_SYMBOL(diag10);
-
-/*
  * Diagnose 14: Input spool file manipulation
  */
 int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode)
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index c83726c9fe0..3d4a78fc1ad 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -672,6 +672,7 @@ static struct insn opcode_b2[] = {
 	{ "rp", 0x77, INSTR_S_RD },
 	{ "stcke", 0x78, INSTR_S_RD },
 	{ "sacf", 0x79, INSTR_S_RD },
+	{ "spp", 0x80, INSTR_S_RD },
 	{ "stsi", 0x7d, INSTR_S_RD },
 	{ "srnm", 0x99, INSTR_S_RD },
 	{ "stfpc", 0x9c, INSTR_S_RD },
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 648f64239a9..1b67fc6ebdc 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -836,7 +836,7 @@ restart_base:
 	stosm	__SF_EMPTY(%r15),0x04	# now we can turn dat on
 	basr	%r14,0
 	l	%r14,restart_addr-.(%r14)
-	br	%r14			# branch to start_secondary
+	basr	%r14,%r14		# branch to start_secondary
 restart_addr:
 	.long	start_secondary
 	.align	8
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 9d3603d6c51..9fd86456349 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -841,7 +841,7 @@ restart_base:
 	mvc	__LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
 	xc	__LC_STEAL_TIMER(8),__LC_STEAL_TIMER
 	stosm	__SF_EMPTY(%r15),0x04	# now we can turn dat on
-	jg	start_secondary
+	brasl	%r14,start_secondary
 	.align	8
 restart_vtime:
 	.long	0x7fffffff,0xffffffff
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 7061398341d..fb317bf2c37 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -460,7 +460,7 @@ startup:
 #ifndef CONFIG_MARCH_G5
 	# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
 	xc	__LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
-	stfl	__LC_STFL_FAC_LIST	# store facility list
+	.insn	s,0xb2b10000,__LC_STFL_FAC_LIST	# store facility list
 	tm	__LC_STFL_FAC_LIST,0x01	# stfle available ?
 	jz	0f
 	la	%r0,0
diff --git a/arch/s390/kernel/jump_label.c b/arch/s390/kernel/jump_label.c
new file mode 100644
index 00000000000..44cc06bedf7
--- /dev/null
+++ b/arch/s390/kernel/jump_label.c
@@ -0,0 +1,59 @@
+/*
+ * Jump label s390 support
+ *
+ * Copyright IBM Corp. 2011
+ * Author(s): Jan Glauber <jang@linux.vnet.ibm.com>
+ */
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/stop_machine.h>
+#include <linux/jump_label.h>
+#include <asm/ipl.h>
+
+#ifdef HAVE_JUMP_LABEL
+
+struct insn {
+	u16 opcode;
+	s32 offset;
+} __packed;
+
+struct insn_args {
+	unsigned long *target;
+	struct insn *insn;
+	ssize_t size;
+};
+
+static int __arch_jump_label_transform(void *data)
+{
+	struct insn_args *args = data;
+	int rc;
+
+	rc = probe_kernel_write(args->target, args->insn, args->size);
+	WARN_ON_ONCE(rc < 0);
+	return 0;
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+			       enum jump_label_type type)
+{
+	struct insn_args args;
+	struct insn insn;
+
+	if (type == JUMP_LABEL_ENABLE) {
+		/* brcl 15,offset */
+		insn.opcode = 0xc0f4;
+		insn.offset = (entry->target - entry->code) >> 1;
+	} else {
+		/* brcl 0,0 */
+		insn.opcode = 0xc004;
+		insn.offset = 0;
+	}
+
+	args.target = (void *) entry->code;
+	args.insn = &insn;
+	args.size = JUMP_LABEL_NOP_SIZE;
+
+	stop_machine(__arch_jump_label_transform, &args, NULL);
+}
+
+#endif
diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S
index 5e73dee63ba..9eabbc90795 100644
--- a/arch/s390/kernel/reipl64.S
+++ b/arch/s390/kernel/reipl64.S
@@ -78,7 +78,7 @@ do_reipl_asm:	basr	%r13,0
  * in the ESA psw.
  * Bit 31 of the addresses has to be 0 for the
  * 31bit lpswe instruction a fact they appear to have
- * ommited from the pop.
+ * omitted from the pop.
  */
 .Lnewpsw:	.quad	0x0000000080000000
 		.quad	.Lpg1
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index ed183c2c616..f5434d1ecb3 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -708,7 +708,7 @@ static void __init setup_hwcaps(void)
 	 * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information
 	 * as stored by stfl, bits 32-xxx contain additional facilities.
 	 * How many facility words are stored depends on the number of
-	 * doublewords passed to the instruction. The additional facilites
+	 * doublewords passed to the instruction. The additional facilities
 	 * are:
 	 *   Bit 42: decimal floating point facility is installed
 	 *   Bit 44: perform floating point operation facility is installed
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 63a97db83f9..63c7d9ff220 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -165,12 +165,12 @@ static void do_ext_call_interrupt(unsigned int ext_int_code,
 	kstat_cpu(smp_processor_id()).irqs[EXTINT_IPI]++;
 	/*
 	 * handle bit signal external calls
-	 *
-	 * For the ec_schedule signal we have to do nothing. All the work
-	 * is done automatically when we return from the interrupt.
 	 */
 	bits = xchg(&S390_lowcore.ext_call_fast, 0);
 
+	if (test_bit(ec_schedule, &bits))
+		scheduler_ipi();
+
 	if (test_bit(ec_call_function, &bits))
 		generic_smp_call_function_interrupt();
 
diff --git a/arch/s390/kernel/switch_cpu.S b/arch/s390/kernel/switch_cpu.S
index 469f11b574f..20530dd2eab 100644
--- a/arch/s390/kernel/switch_cpu.S
+++ b/arch/s390/kernel/switch_cpu.S
@@ -46,7 +46,9 @@ smp_restart_cpu:
 	ltr	%r4,%r4			/* New stack ? */
 	jz	1f
 	lr	%r15,%r4
-1:	basr	%r14,%r2
+1:	lr	%r14,%r2		/* r14: Function to call */
+	lr	%r2,%r3			/* r2 : Parameter for function*/
+	basr	%r14,%r14		/* Call function */
 
 .gprregs_addr:
 	.long	.gprregs
diff --git a/arch/s390/kernel/switch_cpu64.S b/arch/s390/kernel/switch_cpu64.S
index d94aacc898c..5be3f43898f 100644
--- a/arch/s390/kernel/switch_cpu64.S
+++ b/arch/s390/kernel/switch_cpu64.S
@@ -42,7 +42,9 @@ smp_restart_cpu:
 	ltgr	%r4,%r4			/* New stack ? */
 	jz	1f
 	lgr	%r15,%r4
-1:	basr	%r14,%r2
+1:	lgr	%r14,%r2		/* r14: Function to call */
+	lgr	%r2,%r3			/* r2 : Parameter for function*/
+	basr	%r14,%r14		/* Call function */
 
 	.section .data,"aw",@progbits
 .gprregs:
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 9e7b039458d..87be655557a 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -724,7 +724,7 @@ static void clock_sync_cpu(struct clock_sync_data *sync)
 }
 
 /*
- * Sync the TOD clock using the port refered to by aibp. This port
+ * Sync the TOD clock using the port referred to by aibp. This port
  * has to be enabled and the other port has to be disabled. The
  * last eacr update has to be more than 1.6 seconds in the past.
  */
@@ -1012,7 +1012,7 @@ static void etr_work_fn(struct work_struct *work)
 		eacr = etr_handle_update(&aib, eacr);
 
 	/*
-	 * Select ports to enable. The prefered synchronization mode is PPS.
+	 * Select ports to enable. The preferred synchronization mode is PPS.
 	 * If a port can be enabled depends on a number of things:
 	 * 1) The port needs to be online and uptodate. A port is not
 	 *    disabled just because it is not uptodate, but it is only
@@ -1091,7 +1091,7 @@ static void etr_work_fn(struct work_struct *work)
 	/*
 	 * Update eacr and try to synchronize the clock. If the update
 	 * of eacr caused a stepping port switch (or if we have to
-	 * assume that a stepping port switch has occured) or the
+	 * assume that a stepping port switch has occurred) or the
 	 * clock syncing failed, reset the sync check control bit
 	 * and set up a timer to try again after 0.5 seconds
 	 */
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 1ccdf4d8aa8..5e8ead4b4ab 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -44,7 +44,7 @@ static inline void set_vtimer(__u64 expires)
 	__u64 timer;
 
 	asm volatile ("  STPT %0\n"  /* Store current cpu timer value */
-		      "  SPT %1"     /* Set new value immediatly afterwards */
+		      "  SPT %1"     /* Set new value immediately afterwards */
 		      : "=m" (timer) : "m" (expires) );
 	S390_lowcore.system_timer += S390_lowcore.last_update_timer - timer;
 	S390_lowcore.last_update_timer = expires;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index bade533ba28..30ca85cce31 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -721,7 +721,7 @@ static int __init kvm_s390_init(void)
 
 	/*
 	 * guests can ask for up to 255+1 double words, we need a full page
-	 * to hold the maximum amount of facilites. On the other hand, we
+	 * to hold the maximum amount of facilities. On the other hand, we
 	 * only set facilities that are known to work in KVM.
 	 */
 	facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 9194a4b52b2..73c47bd95db 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -311,7 +311,7 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu)
 
 	/*
 	 * a lot of B2 instructions are priviledged. We first check for
-	 * the priviledges ones, that we can handle in the kernel. If the
+	 * the privileged ones, that we can handle in the kernel. If the
 	 * kernel can handle this instruction, we check for the problem
 	 * state bit and (a) handle the instruction or (b) send a code 2
 	 * program check.
diff --git a/arch/s390/kvm/sie64a.S b/arch/s390/kvm/sie64a.S
index 7e9d30d567b..ab0e041ac54 100644
--- a/arch/s390/kvm/sie64a.S
+++ b/arch/s390/kvm/sie64a.S
@@ -48,10 +48,10 @@ sie_irq_handler:
 	tm	__TI_flags+7(%r2),_TIF_EXIT_SIE
 	jz	0f
 	larl	%r2,sie_exit			# work pending, leave sie
-	stg	%r2,__LC_RETURN_PSW+8
+	stg	%r2,SPI_PSW+8(0,%r15)
 	br	%r14
 0:	larl	%r2,sie_reenter			# re-enter with guest id
-	stg	%r2,__LC_RETURN_PSW+8
+	stg	%r2,SPI_PSW+8(0,%r15)
 1:	br	%r14
 
 /*
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index c66ffd8dbbb..1f1dba9dcf5 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -91,7 +91,7 @@ static long cmm_alloc_pages(long nr, long *counter,
 			} else
 				free_page((unsigned long) npa);
 		}
-		diag10(addr);
+		diag10_range(addr >> PAGE_SHIFT, 1);
 		pa->pages[pa->index++] = addr;
 		(*counter)++;
 		spin_unlock(&cmm_lock);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 2c57806c085..ab988135e5c 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -392,7 +392,7 @@ void __kprobes do_protection_exception(struct pt_regs *regs, long pgm_int_code,
 {
 	int fault;
 
-	/* Protection exception is supressing, decrement psw address. */
+	/* Protection exception is suppressing, decrement psw address. */
 	regs->psw.addr -= (pgm_int_code >> 16);
 	/*
 	 * Check for low-address protection.  This needs to be treated
@@ -543,7 +543,6 @@ static void pfault_interrupt(unsigned int ext_int_code,
 	struct task_struct *tsk;
 	__u16 subcode;
 
-	kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++;
 	/*
 	 * Get the external interruption subcode & pfault
 	 * initial/completion signal bit. VM stores this 
@@ -553,14 +552,15 @@ static void pfault_interrupt(unsigned int ext_int_code,
 	subcode = ext_int_code >> 16;
 	if ((subcode & 0xff00) != __SUBCODE_MASK)
 		return;
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++;
 
 	/*
 	 * Get the token (= address of the task structure of the affected task).
 	 */
 #ifdef CONFIG_64BIT
-	tsk = *(struct task_struct **) param64;
+	tsk = (struct task_struct *) param64;
 #else
-	tsk = *(struct task_struct **) param32;
+	tsk = (struct task_struct *) param32;
 #endif
 
 	if (subcode & 0x0080) {
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index 122ffbd08ce..f05edcc3bef 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -24,12 +24,13 @@ static void change_page_attr(unsigned long addr, int numpages,
 			WARN_ON_ONCE(1);
 			continue;
 		}
-		ptep = pte_offset_kernel(pmdp, addr + i * PAGE_SIZE);
+		ptep = pte_offset_kernel(pmdp, addr);
 
 		pte = *ptep;
 		pte = set(pte);
-		ptep_invalidate(&init_mm, addr + i * PAGE_SIZE, ptep);
+		ptep_invalidate(&init_mm, addr, ptep);
 		*ptep = pte;
+		addr += PAGE_SIZE;
 	}
 }
 
@@ -53,3 +54,8 @@ int set_memory_nx(unsigned long addr, int numpages)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(set_memory_nx);
+
+int set_memory_x(unsigned long addr, int numpages)
+{
+	return 0;
+}
diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c
index 3d48f4db246..33cbd373cce 100644
--- a/arch/s390/oprofile/hwsampler.c
+++ b/arch/s390/oprofile/hwsampler.c
@@ -517,12 +517,8 @@ stop_exit:
 
 static int check_hardware_prerequisites(void)
 {
-	unsigned long long facility_bits[2];
-
-	memcpy(facility_bits, S390_lowcore.stfle_fac_list, 32);
-	if (!(facility_bits[1] & (1ULL << 59)))
+	if (!test_facility(68))
 		return -EOPNOTSUPP;
-
 	return 0;
 }
 /*
@@ -1025,20 +1021,14 @@ deallocate_exit:
 	return rc;
 }
 
-long hwsampler_query_min_interval(void)
+unsigned long hwsampler_query_min_interval(void)
 {
-	if (min_sampler_rate)
-		return min_sampler_rate;
-	else
-		return -EINVAL;
+	return min_sampler_rate;
 }
 
-long hwsampler_query_max_interval(void)
+unsigned long hwsampler_query_max_interval(void)
 {
-	if (max_sampler_rate)
-		return max_sampler_rate;
-	else
-		return -EINVAL;
+	return max_sampler_rate;
 }
 
 unsigned long hwsampler_get_sample_overflow_count(unsigned int cpu)
diff --git a/arch/s390/oprofile/hwsampler.h b/arch/s390/oprofile/hwsampler.h
index 8c72b59316b..1912f3bb190 100644
--- a/arch/s390/oprofile/hwsampler.h
+++ b/arch/s390/oprofile/hwsampler.h
@@ -102,8 +102,8 @@ int hwsampler_setup(void);
 int hwsampler_shutdown(void);
 int hwsampler_allocate(unsigned long sdbt, unsigned long sdb);
 int hwsampler_deallocate(void);
-long hwsampler_query_min_interval(void);
-long hwsampler_query_max_interval(void);
+unsigned long hwsampler_query_min_interval(void);
+unsigned long hwsampler_query_max_interval(void);
 int hwsampler_start_all(unsigned long interval);
 int hwsampler_stop_all(void);
 int hwsampler_deactivate(unsigned int cpu);
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index c63d7e58352..5995e9bc72d 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -145,15 +145,11 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops)
 	 * create hwsampler files only if hwsampler_setup() succeeds.
 	 */
 	oprofile_min_interval = hwsampler_query_min_interval();
-	if (oprofile_min_interval < 0) {
-		oprofile_min_interval = 0;
+	if (oprofile_min_interval == 0)
 		return -ENODEV;
-	}
 	oprofile_max_interval = hwsampler_query_max_interval();
-	if (oprofile_max_interval < 0) {
-		oprofile_max_interval = 0;
+	if (oprofile_max_interval == 0)
 		return -ENODEV;
-	}
 
 	if (oprofile_timer_init(ops))
 		return -ENODEV;
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index 4278bbc032c..e73bc781cc1 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -3,7 +3,6 @@ menu "Machine selection"
 config SCORE
        def_bool y
        select HAVE_GENERIC_HARDIRQS
-       select GENERIC_HARDIRQS_NO_DEPRECATED
        select GENERIC_IRQ_SHOW
 
 choice
diff --git a/arch/score/Makefile b/arch/score/Makefile
index d77dc639d8e..974aefe8612 100644
--- a/arch/score/Makefile
+++ b/arch/score/Makefile
@@ -40,5 +40,5 @@ archclean:
 define archhelp
 	echo '  vmlinux.bin          - Raw binary boot image'
 	echo
-	echo '  These will be default as apropriate for a configured platform.'
+	echo '  These will be default as appropriate for a configured platform.'
 endef
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9af3c8d0776..bc439de48cd 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -23,7 +23,6 @@ config SUPERH
 	select HAVE_SPARSE_IRQ
 	select RTC_LIB
 	select GENERIC_ATOMIC64
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 12fec72fec5..1553d56cf4e 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -82,7 +82,7 @@ config SH_NO_BSS_INIT
 	help
 	  If running in painfully slow environments, such as an RTL
 	  simulation or from remote memory via SHdebug, where the memory
-	  can already be gauranteed to ber zeroed on boot, say Y.
+	  can already be guaranteed to ber zeroed on boot, say Y.
 
 	  For all other cases, say N. If this option seems perplexing, or
 	  you aren't sure, say N.
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index a9e33569ad3..fa2a208ec6c 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <cpu/sh7757.h>
 #include <asm/sh_eth.h>
 #include <asm/heartbeat.h>
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 636d8318a72..618bd566cf5 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -156,24 +156,34 @@ static struct platform_device nand_flash_device = {
 #define PORT_DRVCRA	0xA405018A
 #define PORT_DRVCRB	0xA405018C
 
+static int ap320_wvga_set_brightness(void *board_data, int brightness)
+{
+	if (brightness) {
+		gpio_set_value(GPIO_PTS3, 0);
+		__raw_writew(0x100, FPGA_BKLREG);
+	} else {
+		__raw_writew(0, FPGA_BKLREG);
+		gpio_set_value(GPIO_PTS3, 1);
+	}
+	
+	return 0;
+}
+
+static int ap320_wvga_get_brightness(void *board_data)
+{
+	return gpio_get_value(GPIO_PTS3);
+}
+
 static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
 {
 	msleep(100);
 
 	/* ASD AP-320/325 LCD ON */
 	__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
-
-	/* backlight */
-	gpio_set_value(GPIO_PTS3, 0);
-	__raw_writew(0x100, FPGA_BKLREG);
 }
 
 static void ap320_wvga_power_off(void *board_data)
 {
-	/* backlight */
-	__raw_writew(0, FPGA_BKLREG);
-	gpio_set_value(GPIO_PTS3, 1);
-
 	/* ASD AP-320/325 LCD OFF */
 	__raw_writew(0, FPGA_LCDREG);
 }
@@ -209,6 +219,12 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.board_cfg = {
 			.display_on = ap320_wvga_power_on,
 			.display_off = ap320_wvga_power_off,
+			.set_brightness = ap320_wvga_set_brightness,
+			.get_brightness = ap320_wvga_get_brightness,
+		},
+		.bl_info = {
+			.name = "sh_mobile_lcdc_bl",
+			.max_brightness = 1,
 		},
 	}
 };
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index 78cf2ab89d7..f63d323f411 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -51,7 +51,7 @@
  */
 #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
 
-/* Return the hardware event's bit positon within the EMR/ESR */
+/* Return the hardware event's bit position within the EMR/ESR */
 #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
 
 /*
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index fd4ff25f23b..86a0d565ade 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -263,6 +263,18 @@ const static struct fb_videomode ecovec_dvi_modes[] = {
 	},
 };
 
+static int ecovec24_set_brightness(void *board_data, int brightness)
+{
+	gpio_set_value(GPIO_PTR1, brightness);
+
+	return 0;
+}
+
+static int ecovec24_get_brightness(void *board_data)
+{
+	return gpio_get_value(GPIO_PTR1);
+}
+
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.ch[0] = {
 		.interface_type = RGB18,
@@ -273,6 +285,12 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.height = 91,
 		},
 		.board_cfg = {
+			.set_brightness = ecovec24_set_brightness,
+			.get_brightness = ecovec24_get_brightness,
+		},
+		.bl_info = {
+			.name = "sh_mobile_lcdc_bl",
+			.max_brightness = 1,
 		},
 	}
 };
@@ -936,7 +954,7 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd)
 		return;
 	}
 
-	/* read MAC address frome EEPROM */
+	/* read MAC address from EEPROM */
 	for (i = 0; i < sizeof(pd->mac_addr); i++) {
 		pd->mac_addr[i] = mac_read(a, 0x10 + i);
 		msleep(10);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index 94186cf079b..f1147caebac 100644
--- a/arch/sh/boards/mach-landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -23,7 +23,7 @@
 
 static void landisk_power_off(void)
 {
-        __raw_writeb(0x01, PA_SHUTDOWN);
+	__raw_writeb(0x01, PA_SHUTDOWN);
 }
 
 static struct resource cf_ide_resources[3];
@@ -85,7 +85,7 @@ device_initcall(landisk_devices_setup);
 
 static void __init landisk_setup(char **cmdline_p)
 {
-        /* LED ON */
+	/* LED ON */
 	__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
 
 	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
@@ -97,7 +97,6 @@ static void __init landisk_setup(char **cmdline_p)
  */
 static struct sh_machine_vector mv_landisk __initmv = {
 	.mv_name = "LANDISK",
-	.mv_nr_irqs = 72,
 	.mv_setup = landisk_setup,
 	.mv_init_irq = init_landisk_IRQ,
 };
diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig
index e71a531f1e3..77ec0e7b8dd 100644
--- a/arch/sh/configs/apsh4ad0a_defconfig
+++ b/arch/sh/configs/apsh4ad0a_defconfig
@@ -48,7 +48,6 @@ CONFIG_PREEMPT=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
 CONFIG_PM_RUNTIME=y
 CONFIG_CPU_IDLE=y
 CONFIG_NET=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
index dc4a2eb6a61..c41650572d7 100644
--- a/arch/sh/configs/sdk7786_defconfig
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -83,7 +83,6 @@ CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
 CONFIG_PM_RUNTIME=y
 CONFIG_CPU_IDLE=y
 CONFIG_NET=y
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 4983a4d2035..5ede38c330d 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -61,7 +61,7 @@
   #define SH7751_PCICONF3_BIST7      0x80000000  /* Bist Supported */
   #define SH7751_PCICONF3_BIST6      0x40000000  /* Bist Executing */
   #define SH7751_PCICONF3_BIST3_0    0x0F000000  /* Bist Passed */
-  #define SH7751_PCICONF3_HD7        0x00800000  /* Single Funtion device */
+  #define SH7751_PCICONF3_HD7        0x00800000  /* Single Function device */
   #define SH7751_PCICONF3_HD6_0      0x007F0000  /* Configuration Layout */
   #define SH7751_PCICONF3_LAT        0x0000FF00  /* Latency Timer */
   #define SH7751_PCICONF3_CLS        0x000000FF  /* Cache Line Size */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index a09c77dd09d..194231cb5a7 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -84,7 +84,7 @@ int __devinit register_pci_controller(struct pci_channel *hose)
 	hose_tail = &hose->next;
 
 	/*
-	 * Do not panic here but later - this might hapen before console init.
+	 * Do not panic here but later - this might happen before console init.
 	 */
 	if (!hose->io_map_base) {
 		printk(KERN_WARNING
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index c4e0b3d472b..822d6084195 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -186,7 +186,7 @@ typedef struct page *pgtable_t;
 /*
  * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
  * happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is gauranteed by
+ * alignment to avoid traps. The kmalloc alignment is guaranteed by
  * virtue of L1_CACHE_BYTES, requiring this to only be special cased
  * for slab caches.
  */
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index b799fe71114..0bce3d81569 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -167,7 +167,7 @@ static inline unsigned long copy_ptea_attributes(unsigned long x)
 #endif
 
 /*
- * Mask of bits that are to be preserved accross pgprot changes.
+ * Mask of bits that are to be preserved across pgprot changes.
  */
 #define _PAGE_CHG_MASK \
 	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h
index c48a9c3420d..95adc500cab 100644
--- a/arch/sh/include/asm/unaligned-sh4a.h
+++ b/arch/sh/include/asm/unaligned-sh4a.h
@@ -9,7 +9,7 @@
  * struct.
  *
  * The same note as with the movli.l/movco.l pair applies here, as long
- * as the load is gauranteed to be inlined, nothing else will hook in to
+ * as the load is guaranteed to be inlined, nothing else will hook in to
  * r0 and we get the return value for free.
  *
  * NOTE: Due to the fact we require r0 encoding, care should be taken to
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
index 5d9d4d5154b..6ce944e33e5 100644
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -24,7 +24,7 @@
 #define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
 #define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
 #define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extension Pin Polarity control */
 #define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
 #define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
 #define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
@@ -89,7 +89,7 @@
 #define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
 #define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
 #define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
-#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extension Pin Polarity control */
 #define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
 #define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
 #define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h
index 0a800157b82..e04f75eaa15 100644
--- a/arch/sh/include/mach-common/mach/r2d.h
+++ b/arch/sh/include/mach-common/mach/r2d.h
@@ -18,18 +18,18 @@
 #define PA_DISPCTL	0xa4000008	/* Display Timing control */
 #define PA_SDMPOW	0xa400000a	/* SD Power control */
 #define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
-#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
+#define PA_PCICD	0xa400000e	/* PCI Extension detect control */
 #define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
 
 #define PA_R2D1_AXRST		0xa4000022	/* AX_LAN Reset control */
 #define PA_R2D1_CFRST		0xa4000024	/* CF Reset control */
 #define PA_R2D1_ADMRTS		0xa4000026	/* SD Reset control */
-#define PA_R2D1_EXTRST		0xa4000028	/* Extention Reset control */
+#define PA_R2D1_EXTRST		0xa4000028	/* Extension Reset control */
 #define PA_R2D1_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
 
 #define PA_R2DPLUS_CFRST	0xa4000022	/* CF Reset control */
 #define PA_R2DPLUS_ADMRTS	0xa4000024	/* SD Reset control */
-#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extention Reset control */
+#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extension Reset control */
 #define PA_R2DPLUS_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
 #define PA_R2DPLUS_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
 
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index dd0e0f21135..8f63a264a84 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -67,7 +67,7 @@ int __init __deprecated cpg_clk_init(void)
 }
 
 /*
- * Placeholder for compatability, until the lazy CPUs do this
+ * Placeholder for compatibility, until the lazy CPUs do this
  * on their own.
  */
 int __init __weak arch_clk_init(void)
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 14726eef1ce..f0907995b4c 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -20,6 +20,7 @@
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
 #include <linux/io.h>
+#include <linux/prefetch.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
 #include <cpu/sq.h>
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 1656b8c91fa..beba32beb6d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -648,7 +648,7 @@ static void __init sh7786_usb_setup(void)
 	 * The following settings are necessary
 	 * for using the USB modules.
 	 *
-	 * see "USB Inital Settings" for detail
+	 * see "USB Initial Settings" for detail
 	 */
 	__raw_writel(USBINITVAL1, USBINITREG1);
 	__raw_writel(USBINITVAL2, USBINITREG2);
diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
index 6dcb8166a64..22db127afa7 100644
--- a/arch/sh/kernel/cpu/shmobile/pm_runtime.c
+++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -139,7 +139,7 @@ void platform_pm_runtime_suspend_idle(void)
 	queue_work(pm_wq, &hwblk_work);
 }
 
-int platform_pm_runtime_suspend(struct device *dev)
+static int default_platform_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct pdev_archdata *ad = &pdev->archdata;
@@ -147,7 +147,7 @@ int platform_pm_runtime_suspend(struct device *dev)
 	int hwblk = ad->hwblk_id;
 	int ret = 0;
 
-	dev_dbg(dev, "platform_pm_runtime_suspend() [%d]\n", hwblk);
+	dev_dbg(dev, "%s() [%d]\n", __func__, hwblk);
 
 	/* ignore off-chip platform devices */
 	if (!hwblk)
@@ -183,20 +183,20 @@ int platform_pm_runtime_suspend(struct device *dev)
 	mutex_unlock(&ad->mutex);
 
 out:
-	dev_dbg(dev, "platform_pm_runtime_suspend() [%d] returns %d\n",
-		hwblk, ret);
+	dev_dbg(dev, "%s() [%d] returns %d\n",
+		 __func__, hwblk, ret);
 
 	return ret;
 }
 
-int platform_pm_runtime_resume(struct device *dev)
+static int default_platform_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct pdev_archdata *ad = &pdev->archdata;
 	int hwblk = ad->hwblk_id;
 	int ret = 0;
 
-	dev_dbg(dev, "platform_pm_runtime_resume() [%d]\n", hwblk);
+	dev_dbg(dev, "%s() [%d]\n", __func__, hwblk);
 
 	/* ignore off-chip platform devices */
 	if (!hwblk)
@@ -228,19 +228,19 @@ int platform_pm_runtime_resume(struct device *dev)
 	 */
 	mutex_unlock(&ad->mutex);
 out:
-	dev_dbg(dev, "platform_pm_runtime_resume() [%d] returns %d\n",
-		hwblk, ret);
+	dev_dbg(dev, "%s() [%d] returns %d\n",
+		__func__, hwblk, ret);
 
 	return ret;
 }
 
-int platform_pm_runtime_idle(struct device *dev)
+static int default_platform_runtime_idle(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	int hwblk = pdev->archdata.hwblk_id;
 	int ret = 0;
 
-	dev_dbg(dev, "platform_pm_runtime_idle() [%d]\n", hwblk);
+	dev_dbg(dev, "%s() [%d]\n", __func__, hwblk);
 
 	/* ignore off-chip platform devices */
 	if (!hwblk)
@@ -252,10 +252,19 @@ int platform_pm_runtime_idle(struct device *dev)
 	/* suspend synchronously to disable clocks immediately */
 	ret = pm_runtime_suspend(dev);
 out:
-	dev_dbg(dev, "platform_pm_runtime_idle() [%d] done!\n", hwblk);
+	dev_dbg(dev, "%s() [%d] done!\n", __func__, hwblk);
 	return ret;
 }
 
+static struct dev_power_domain default_power_domain = {
+	.ops = {
+		.runtime_suspend = default_platform_runtime_suspend,
+		.runtime_resume = default_platform_runtime_resume,
+		.runtime_idle = default_platform_runtime_idle,
+		USE_PLATFORM_PM_SLEEP_OPS
+	},
+};
+
 static int platform_bus_notify(struct notifier_block *nb,
 			       unsigned long action, void *data)
 {
@@ -276,6 +285,7 @@ static int platform_bus_notify(struct notifier_block *nb,
 		hwblk_disable(hwblk_info, hwblk);
 		/* make sure driver re-inits itself once */
 		__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
+		dev->pwr_domain = &default_power_domain;
 		break;
 	/* TODO: add BUS_NOTIFY_BIND_DRIVER and increase idle count */
 	case BUS_NOTIFY_BOUND_DRIVER:
@@ -289,6 +299,7 @@ static int platform_bus_notify(struct notifier_block *nb,
 		__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
 		break;
 	case BUS_NOTIFY_DEL_DEVICE:
+		dev->pwr_domain = NULL;
 		break;
 	}
 	return 0;
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 64ea0b16539..91971103b62 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -183,7 +183,7 @@ asmlinkage void do_softirq(void)
 		);
 
 		/*
-		 * Shouldnt happen, we returned above if in_interrupt():
+		 * Shouldn't happen, we returned above if in_interrupt():
 		 */
 		WARN_ON_ONCE(softirq_count());
 	}
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 2130ca674e9..3d7b209b217 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -117,7 +117,11 @@ void user_enable_single_step(struct task_struct *child)
 
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 
+	if (ptrace_get_breakpoints(child) < 0)
+		return;
+
 	set_single_step(child, pc);
+	ptrace_put_breakpoints(child);
 }
 
 void user_disable_single_step(struct task_struct *child)
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 4f267160c51..58bff45d115 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -150,7 +150,7 @@ void __init check_for_initrd(void)
 	}
 
 	/*
-	 * If we got this far inspite of the boot loader's best efforts
+	 * If we got this far in spite of the boot loader's best efforts
 	 * to the contrary, assume we actually have a valid initrd and
 	 * fix up the root dev.
 	 */
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 509b36b4511..6207561ea34 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <asm/atomic.h>
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -323,6 +324,7 @@ void smp_message_recv(unsigned int msg)
 		generic_smp_call_function_interrupt();
 		break;
 	case SMP_MSG_RESCHEDULE:
+		scheduler_ipi();
 		break;
 	case SMP_MSG_FUNCTION_SINGLE:
 		generic_smp_call_function_single_interrupt();
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 3484c2f65ab..b51a17104b5 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -87,7 +87,6 @@ void die(const char * str, struct pt_regs * regs, long err)
 	bust_spinlocks(1);
 
 	printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
-	sysfs_printk_last_file();
 	print_modules();
 	show_regs(regs);
 
diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S
index 2a62816d2dd..49aeabeba2c 100644
--- a/arch/sh/lib64/copy_user_memcpy.S
+++ b/arch/sh/lib64/copy_user_memcpy.S
@@ -27,7 +27,7 @@
 ! 2.: When there are two or three bytes in the last word of an 11-or-more
 !     bytes memory chunk to b copied, the rest of the word can be read
 !     without side effects.
-!     This could be easily changed by increasing the minumum size of
+!     This could be easily changed by increasing the minimum size of
 !     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
 !     however, this would cost a few extra cyles on average.
 !     For SHmedia, the assumption is that any quadword can be read in its
diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S
index dd300c372ce..5d682e0ee24 100644
--- a/arch/sh/lib64/memcpy.S
+++ b/arch/sh/lib64/memcpy.S
@@ -29,7 +29,7 @@
 ! 2.: When there are two or three bytes in the last word of an 11-or-more
 !     bytes memory chunk to b copied, the rest of the word can be read
 !     without side effects.
-!     This could be easily changed by increasing the minumum size of
+!     This could be easily changed by increasing the minimum size of
 !     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
 !     however, this would cost a few extra cyles on average.
 !     For SHmedia, the assumption is that any quadword can be read in its
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 14b234631f5..e560d102215 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -51,7 +51,6 @@ config SPARC64
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	select IRQ_PREFLOW_FASTEOI
 
diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
index bafe5a631b6..75686409be2 100644
--- a/arch/sparc/include/asm/hypervisor.h
+++ b/arch/sparc/include/asm/hypervisor.h
@@ -654,7 +654,7 @@ extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
  * ARG3:	mmu context
  * ARG4:	flags (HV_MMU_{IMMU,DMMU})
  * RET0:	status
- * ERRORS:	EINVAL			Invalid virutal address, context, or
+ * ERRORS:	EINVAL			Invalid virtual address, context, or
  *					flags value
  *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
  *
@@ -721,7 +721,7 @@ extern void sun4v_mmu_demap_all(void);
  * ARG2:	TTE
  * ARG3:	flags (HV_MMU_{IMMU,DMMU})
  * RET0:	status
- * ERRORS:	EINVAL			Invalid virutal address or flags value
+ * ERRORS:	EINVAL			Invalid virtual address or flags value
  *		EBADPGSZ		Invalid page size value
  *		ENORADDR		Invalid real address in TTE
  *		ETOOMANY		Too many mappings (max of 8 reached)
@@ -800,7 +800,7 @@ extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
  * ARG1:	reserved, must be zero
  * ARG2:	flags (HV_MMU_{IMMU,DMMU})
  * RET0:	status
- * ERRORS:	EINVAL			Invalid virutal address or flags value
+ * ERRORS:	EINVAL			Invalid virtual address or flags value
  *		ENOMAP			Specified mapping was not found
  *
  * Demaps any permanent page mapping (established via
@@ -1205,7 +1205,7 @@ struct hv_trap_trace_control {
  * structure contents.  Attempts to do so will result in undefined
  * behavior for the guest.
  *
- * Each trap trace buffer entry is layed out as follows:
+ * Each trap trace buffer entry is laid out as follows:
  */
 #ifndef __ASSEMBLY__
 struct hv_trap_trace_entry {
@@ -1300,7 +1300,7 @@ struct hv_trap_trace_entry {
  * state in RET1.  Future systems may define various flags for the
  * enable argument (ARG0), for the moment a guest should pass
  * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
- * tracing - which will ensure future compatability.
+ * tracing - which will ensure future compatibility.
  */
 #define HV_FAST_TTRACE_ENABLE		0x92
 
@@ -1880,7 +1880,7 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
  * pci_device, at pci_config_offset from the beginning of the device's
  * configuration space.  If there was no error, RET1 is set to zero and
  * RET2 is set to the data read.  Insignificant bits in RET2 are not
- * guarenteed to have any specific value and therefore must be ignored.
+ * guaranteed to have any specific value and therefore must be ignored.
  *
  * The data returned in RET2 is size based byte swapped.
  *
@@ -1941,9 +1941,9 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
  * and return the actual data read in RET2.  The data returned is size based
  * byte swapped.
  *
- * Non-significant bits in RET2 are not guarenteed to have any specific value
+ * Non-significant bits in RET2 are not guaranteed to have any specific value
  * and therefore must be ignored.  If RET1 is returned as non-zero, the data
- * value is not guarenteed to have any specific value and should be ignored.
+ * value is not guaranteed to have any specific value and should be ignored.
  *
  * The caller must have permission to read from the given devhandle, real
  * address, which must be an IO address.  The argument real address must be a
@@ -2456,9 +2456,9 @@ extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
  *
  * As receive queue configuration causes a reset of the queue's head and
  * tail pointers there is no way for a gues to determine how many entries
- * have been received between a preceeding ldc_get_rx_state() API call
+ * have been received between a preceding ldc_get_rx_state() API call
  * and the completion of the configuration operation.  It should be noted
- * that datagram delivery is not guarenteed via domain channels anyway,
+ * that datagram delivery is not guaranteed via domain channels anyway,
  * and therefore any higher protocol should be resilient to datagram
  * loss if necessary.  However, to overcome this specific race potential
  * it is recommended, for example, that a higher level protocol be employed
diff --git a/arch/sparc/include/asm/jump_label.h b/arch/sparc/include/asm/jump_label.h
index 427d4684e0d..fc73a82366f 100644
--- a/arch/sparc/include/asm/jump_label.h
+++ b/arch/sparc/include/asm/jump_label.h
@@ -7,17 +7,20 @@
 
 #define JUMP_LABEL_NOP_SIZE 4
 
-#define JUMP_LABEL(key, label)					\
-	do {							\
-		asm goto("1:\n\t"				\
-			 "nop\n\t"				\
-			 "nop\n\t"				\
-			 ".pushsection __jump_table,  \"a\"\n\t"\
-			 ".align 4\n\t"				\
-			 ".word 1b, %l[" #label "], %c0\n\t"	\
-			 ".popsection \n\t"			\
-			 : :  "i" (key) :  : label);\
-	} while (0)
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+		asm goto("1:\n\t"
+			 "nop\n\t"
+			 "nop\n\t"
+			 ".pushsection __jump_table,  \"aw\"\n\t"
+			 ".align 4\n\t"
+			 ".word 1b, %l[l_yes], %c0\n\t"
+			 ".popsection \n\t"
+			 : :  "i" (key) : : l_yes);
+	return false;
+l_yes:
+	return true;
+}
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/sparc/include/asm/ns87303.h b/arch/sparc/include/asm/ns87303.h
index 686defe6aaa..af755483e17 100644
--- a/arch/sparc/include/asm/ns87303.h
+++ b/arch/sparc/include/asm/ns87303.h
@@ -37,7 +37,7 @@
 /* Power and Test Register (PTR) bits */
 #define PTR_LPTB_IRQ7	0x08
 #define PTR_LEVEL_IRQ	0x80	/* When not ECP/EPP: Use level IRQ           */
-#define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controlls direction */
+#define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controls direction */
 				/*               of the parallel port	     */
 
 /* Function Control Register (FCR) bits */
diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h
index 843e4faf6a5..288d7beba05 100644
--- a/arch/sparc/include/asm/pcr.h
+++ b/arch/sparc/include/asm/pcr.h
@@ -31,7 +31,7 @@ extern unsigned int picl_shift;
 
 /* In order to commonize as much of the implementation as
  * possible, we use PICH as our counter.  Mostly this is
- * to accomodate Niagara-1 which can only count insn cycles
+ * to accommodate Niagara-1 which can only count insn cycles
  * in PICH.
  */
 static inline u64 picl_value(unsigned int nmi_hz)
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
index 30b0b797dc0..c7ad3fe2b25 100644
--- a/arch/sparc/include/asm/ptrace.h
+++ b/arch/sparc/include/asm/ptrace.h
@@ -33,7 +33,7 @@ struct pt_regs {
 	 * things like "in a system call" etc. for an arbitray
 	 * process.
 	 *
-	 * The PT_REGS_MAGIC is choosen such that it can be
+	 * The PT_REGS_MAGIC is chosen such that it can be
 	 * loaded completely using just a sethi instruction.
 	 */
 	unsigned int magic;
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 1c79f32734a..8b9c556d630 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -65,6 +65,10 @@ static inline int pcibus_to_node(struct pci_bus *pbus)
 #define smt_capable()				(sparc64_multi_core)
 #endif /* CONFIG_SMP */
 
-#define cpu_coregroup_mask(cpu)			(&cpu_core_map[cpu])
+extern cpumask_t cpu_core_map[NR_CPUS];
+static inline const struct cpumask *cpu_coregroup_mask(int cpu)
+{
+        return &cpu_core_map[cpu];
+}
 
 #endif /* _ASM_SPARC64_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 2f475d7c0b5..c5387ed0add 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -403,8 +403,10 @@
 #define __NR_name_to_handle_at	332
 #define __NR_open_by_handle_at	333
 #define __NR_clock_adjtime	334
+#define __NR_syncfs		335
+#define __NR_sendmmsg		336
 
-#define NR_syscalls		335
+#define NR_syscalls		337
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index f679c57644d..1e34f29e58b 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -165,7 +165,7 @@ static int __devinit apc_probe(struct platform_device *op)
 	return 0;
 }
 
-static struct of_device_id __initdata apc_match[] = {
+static struct of_device_id apc_match[] = {
 	{
 		.name = APC_OBPNAME,
 	},
diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c
index 2abace076c7..773091ac71a 100644
--- a/arch/sparc/kernel/auxio_64.c
+++ b/arch/sparc/kernel/auxio_64.c
@@ -93,7 +93,7 @@ void auxio_set_lte(int on)
 }
 EXPORT_SYMBOL(auxio_set_lte);
 
-static struct of_device_id __initdata auxio_match[] = {
+static const struct of_device_id auxio_match[] = {
 	{
 		.name = "auxio",
 	},
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 136d3718a74..7eef3f74196 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -140,7 +140,7 @@ out_free:
 	goto out;
 }
 
-static struct of_device_id __initdata clock_board_match[] = {
+static const struct of_device_id clock_board_match[] = {
 	{
 		.name = "clock-board",
 	},
@@ -245,7 +245,7 @@ out_free:
 	goto out;
 }
 
-static struct of_device_id __initdata fhc_match[] = {
+static const struct of_device_id fhc_match[] = {
 	{
 		.name = "fhc",
 	},
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 4a700f4b79c..3add4de8a1a 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1218,7 +1218,7 @@ static int ds_remove(struct vio_dev *vdev)
 	return 0;
 }
 
-static struct vio_device_id __initdata ds_match[] = {
+static const struct vio_device_id ds_match[] = {
 	{
 		.type = "domain-services-port",
 	},
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 1504df8ddf7..6da784a5612 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -801,7 +801,7 @@ vac_linesize_patch_32:		subcc	%l7, 32, %l7
 	.globl	vac_hwflush_patch1_on, vac_hwflush_patch2_on
 
 /*
- * Ugly, but we cant use hardware flushing on the sun4 and we'd require
+ * Ugly, but we can't use hardware flushing on the sun4 and we'd require
  * two instructions (Anton)
  */
 vac_hwflush_patch1_on:		addcc	%l7, -PAGE_SIZE, %l7
@@ -851,7 +851,7 @@ sun4c_fault:
 	 sethi	%hi(~((1 << SUN4C_REAL_PGDIR_SHIFT) - 1)), %l4
 
 	/* If the kernel references a bum kernel pointer, or a pte which
-	 * points to a non existant page in ram, we will run this code
+	 * points to a non existent page in ram, we will run this code
 	 * _forever_ and lock up the machine!!!!! So we must check for
 	 * this condition, the AC_SYNC_ERR bits are what we must examine.
 	 * Also a parity error would make this happen as well.  So we just
@@ -1283,7 +1283,7 @@ linux_syscall_trace:
 	.globl	ret_from_fork
 ret_from_fork:
 	call	schedule_tail
-	 mov	%g3, %o0
+	 ld	[%g3 + TI_TASK], %o0
 	b	ret_sys_call
 	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
 
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index f8f21050448..aa594c792d1 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -85,7 +85,7 @@ sparc_ramdisk_image64:
 sparc64_boot:
 	mov	%o4, %l7
 
-	/* We need to remap the kernel.  Use position independant
+	/* We need to remap the kernel.  Use position independent
 	 * code to remap us to KERNBASE.
 	 *
 	 * SILO can invoke us with 32-bit address masking enabled,
diff --git a/arch/sparc/kernel/init_task.c b/arch/sparc/kernel/init_task.c
index 5fe3d65581f..35f141a9f50 100644
--- a/arch/sparc/kernel/init_task.c
+++ b/arch/sparc/kernel/init_task.c
@@ -15,7 +15,7 @@ EXPORT_SYMBOL(init_task);
 
 /* .text section in head.S is aligned at 8k boundary and this gets linked
  * right after that so that the init_thread_union is aligned properly as well.
- * If this is not aligned on a 8k boundry, then you should change code
+ * If this is not aligned on a 8k boundary, then you should change code
  * in etrap.S which assumes it.
  */
 union thread_union init_thread_union __init_task_data =
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index 6addb914fcc..56db06432ce 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -107,7 +107,7 @@ static struct mdesc_handle * __init mdesc_memblock_alloc(unsigned int mdesc_size
 	return hp;
 }
 
-static void mdesc_memblock_free(struct mdesc_handle *hp)
+static void __init mdesc_memblock_free(struct mdesc_handle *hp)
 {
 	unsigned int alloc_size;
 	unsigned long start;
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 63cd4e5d47c..5c149689bb2 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -459,7 +459,7 @@ apply_interrupt_map(struct device_node *dp, struct device_node *pp,
 		 *
 		 * Handle this by deciding that, if we didn't get a
 		 * match in the parent's 'interrupt-map', and the
-		 * parent is an IRQ translater, then use the parent as
+		 * parent is an IRQ translator, then use the parent as
 		 * our IRQ controller.
 		 */
 		if (pp->irq_trans)
diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c
index 3d70f8326ef..d29a32fcc5e 100644
--- a/arch/sparc/kernel/pci_fire.c
+++ b/arch/sparc/kernel/pci_fire.c
@@ -496,7 +496,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id __initdata fire_match[] = {
+static const struct of_device_id fire_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pciex108e,80f0",
diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c
index 56ee745064d..86ae08d9b6e 100644
--- a/arch/sparc/kernel/pci_psycho.c
+++ b/arch/sparc/kernel/pci_psycho.c
@@ -592,7 +592,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id __initdata psycho_match[] = {
+static const struct of_device_id psycho_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,8000",
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index 2857073342d..d1840dbdaa2 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -452,8 +452,10 @@ static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm,
 	sabre_scan_bus(pbm, &op->dev);
 }
 
+static const struct of_device_id sabre_match[];
 static int __devinit sabre_probe(struct platform_device *op)
 {
+	const struct of_device_id *match;
 	const struct linux_prom64_registers *pr_regs;
 	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
@@ -463,7 +465,8 @@ static int __devinit sabre_probe(struct platform_device *op)
 	const u32 *vdma;
 	u64 clear_irq;
 
-	hummingbird_p = op->dev.of_match && (op->dev.of_match->data != NULL);
+	match = of_match_device(sabre_match, &op->dev);
+	hummingbird_p = match && (match->data != NULL);
 	if (!hummingbird_p) {
 		struct device_node *cpu_dp;
 
@@ -581,7 +584,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id __initdata sabre_match[] = {
+static const struct of_device_id sabre_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,a001",
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index 1d41af73a92..283fbc329a4 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -1458,11 +1458,15 @@ out_err:
 	return err;
 }
 
+static const struct of_device_id schizo_match[];
 static int __devinit schizo_probe(struct platform_device *op)
 {
-	if (!op->dev.of_match)
+	const struct of_device_id *match;
+
+	match = of_match_device(schizo_match, &op->dev);
+	if (!match)
 		return -EINVAL;
-	return __schizo_init(op, (unsigned long) op->dev.of_match->data);
+	return __schizo_init(op, (unsigned long)match->data);
 }
 
 /* The ordering of this table is very important.  Some Tomatillo
@@ -1470,7 +1474,7 @@ static int __devinit schizo_probe(struct platform_device *op)
  * and pci108e,8001.  So list the chips in reverse chronological
  * order.
  */
-static struct of_device_id __initdata schizo_match[] = {
+static const struct of_device_id schizo_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,a801",
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 6cf53468178..b01a06e9ae4 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -998,7 +998,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id __initdata pci_sun4v_match[] = {
+static const struct of_device_id pci_sun4v_match[] = {
 	{
 		.name = "pci",
 		.compatible = "SUNW,sun4v-pci",
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 760578687e7..ee8426ede7c 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1027,7 +1027,7 @@ static int sparc_pmu_add(struct perf_event *event, int ef_flags)
 
 	/*
 	 * If group events scheduling transaction was started,
-	 * skip the schedulability test here, it will be peformed
+	 * skip the schedulability test here, it will be performed
 	 * at commit time(->commit_txn) as a whole
 	 */
 	if (cpuc->group_flag & PERF_EVENT_TXN)
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index 93d7b4465f8..6a585d39358 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -69,7 +69,7 @@ static int __devinit pmc_probe(struct platform_device *op)
 	return 0;
 }
 
-static struct of_device_id __initdata pmc_match[] = {
+static struct of_device_id pmc_match[] = {
 	{
 		.name = PMC_OBPNAME,
 	},
diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c
index cd725fe238b..cb4c0f57c02 100644
--- a/arch/sparc/kernel/power.c
+++ b/arch/sparc/kernel/power.c
@@ -52,7 +52,7 @@ static int __devinit power_probe(struct platform_device *op)
 	return 0;
 }
 
-static struct of_device_id __initdata power_match[] = {
+static const struct of_device_id power_match[] = {
 	{
 		.name = "power",
 	},
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index 91c10fb7085..442286d8343 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -53,6 +53,7 @@ cpumask_t smp_commenced_mask = CPU_MASK_NONE;
 void __cpuinit smp_store_cpu_info(int id)
 {
 	int cpu_node;
+	int mid;
 
 	cpu_data(id).udelay_val = loops_per_jiffy;
 
@@ -60,10 +61,13 @@ void __cpuinit smp_store_cpu_info(int id)
 	cpu_data(id).clock_tick = prom_getintdefault(cpu_node,
 						     "clock-frequency", 0);
 	cpu_data(id).prom_node = cpu_node;
-	cpu_data(id).mid = cpu_get_hwmid(cpu_node);
+	mid = cpu_get_hwmid(cpu_node);
 
-	if (cpu_data(id).mid < 0)
-		panic("No MID found for CPU%d at node 0x%08d", id, cpu_node);
+	if (mid < 0) {
+		printk(KERN_NOTICE "No MID found for CPU%d at node 0x%08d", id, cpu_node);
+		mid = 0;
+	}
+	cpu_data(id).mid = mid;
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -125,7 +129,9 @@ struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 };
 
 void smp_send_reschedule(int cpu)
 {
-	/* See sparc64 */
+	/*
+	 * XXX missing reschedule IPI, see scheduler_ipi()
+	 */
 }
 
 void smp_send_stop(void)
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 3e94a8c2323..9478da7fdb3 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1368,6 +1368,7 @@ void smp_send_reschedule(int cpu)
 void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
+	scheduler_ipi();
 }
 
 /* This is a nop because we capture all other cpus
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 4b86eaf04fe..332c83ff770 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -84,4 +84,4 @@ sys_call_table:
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 /*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-
+/*335*/	.long sys_syncfs, sys_sendmmsg
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 0331bafdf3a..43887ca0be0 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -85,6 +85,7 @@ sys_call_table32:
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
 	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
+	.word sys_syncfs, compat_sys_sendmmsg
 
 #endif /* CONFIG_COMPAT */
 
@@ -161,3 +162,4 @@ sys_call_table:
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
+	.word sys_syncfs, sys_sendmmsg
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 4e236391b63..96046a4024c 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -168,7 +168,7 @@ static int __devinit clock_probe(struct platform_device *op)
 	return 0;
 }
 
-static struct of_device_id __initdata clock_match[] = {
+static struct of_device_id clock_match[] = {
 	{
 		.name = "eeprom",
 	},
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 95ec25faba3..2b8d54b2d85 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -442,7 +442,7 @@ static int __devinit rtc_probe(struct platform_device *op)
 	return platform_device_register(&rtc_cmos_device);
 }
 
-static struct of_device_id __initdata rtc_match[] = {
+static const struct of_device_id rtc_match[] = {
 	{
 		.name = "rtc",
 		.compatible = "m5819",
@@ -487,7 +487,7 @@ static int __devinit bq4802_probe(struct platform_device *op)
 	return platform_device_register(&rtc_bq4802_device);
 }
 
-static struct of_device_id __initdata bq4802_match[] = {
+static const struct of_device_id bq4802_match[] = {
 	{
 		.name = "rtc",
 		.compatible = "bq4802",
@@ -552,7 +552,7 @@ static int __devinit mostek_probe(struct platform_device *op)
 	return platform_device_register(&m48t59_rtc);
 }
 
-static struct of_device_id __initdata mostek_match[] = {
+static const struct of_device_id mostek_match[] = {
 	{
 		.name = "eeprom",
 	},
diff --git a/arch/sparc/lib/checksum_32.S b/arch/sparc/lib/checksum_32.S
index 3632cb34e91..0084c3361e1 100644
--- a/arch/sparc/lib/checksum_32.S
+++ b/arch/sparc/lib/checksum_32.S
@@ -289,10 +289,16 @@ cc_end_cruft:
 
 	/* Also, handle the alignment code out of band. */
 cc_dword_align:
-	cmp	%g1, 6
-	bl,a	ccte
+	cmp	%g1, 16
+	bge	1f
+	 srl	%g1, 1, %o3
+2:	cmp	%o3, 0
+	be,a	ccte
 	 andcc	%g1, 0xf, %o3
-	andcc	%o0, 0x1, %g0
+	andcc	%o3, %o0, %g0	! Check %o0 only (%o1 has the same last 2 bits)
+	be,a	2b
+	 srl	%o3, 1, %o3
+1:	andcc	%o0, 0x1, %g0
 	bne	ccslow
 	 andcc	%o0, 0x2, %g0
 	be	1f
diff --git a/arch/sparc/math-emu/Makefile b/arch/sparc/math-emu/Makefile
index b9085ecbb27..825dbee94d8 100644
--- a/arch/sparc/math-emu/Makefile
+++ b/arch/sparc/math-emu/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the FPU instruction emulation.
 #
 
-# supress all warnings - as math.c produces a lot!
+# suppress all warnings - as math.c produces a lot!
 ccflags-y := -w
 
 obj-y    := math_$(BITS).o
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 5e34a9fee9b..e32b0c23c4c 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -11,7 +11,6 @@ config TILE
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 # FIXME: investigate whether we need/want these options.
@@ -52,7 +51,7 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool y
 
-# FIXME: tilegx can implement a more efficent rwsem.
+# FIXME: tilegx can implement a more efficient rwsem.
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h
index 146e47d5334..f13188ac281 100644
--- a/arch/tile/include/hv/drv_xgbe_intf.h
+++ b/arch/tile/include/hv/drv_xgbe_intf.h
@@ -319,7 +319,7 @@ typedef union
  *         is an error code, or zero if no error.  The val0 member is the
  *         updated value of seqno; it has been incremented by 1 for each
  *         packet sent.  That increment may be less than nentries if an
- *         error occured, or if some of the entries in the vector contain
+ *         error occurred, or if some of the entries in the vector contain
  *         handles equal to NETIO_PKT_HANDLE_NONE.  The val1 member is the
  *         updated value of nentries; it has been decremented by 1 for each
  *         vector entry processed.  Again, that decrement may be less than
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
index 1b8bf03d62a..ee41bca4c8c 100644
--- a/arch/tile/include/hv/hypervisor.h
+++ b/arch/tile/include/hv/hypervisor.h
@@ -1340,7 +1340,7 @@ typedef struct
  *  this operation.  If any permanent delivery errors were encountered,
  *  the routine returns HV_ERECIP.  In the event of permanent delivery
  *  errors, it may be the case that delivery was not attempted to all
- *  recipients; if any messages were succesfully delivered, however,
+ *  recipients; if any messages were successfully delivered, however,
  *  recipients' state values will be updated appropriately.
  *
  *  It is explicitly legal to specify a recipient structure whose state
@@ -1359,7 +1359,7 @@ typedef struct
  *  never call hv_receive_message, or could register a different state
  *  buffer, losing the message.
  *
- *  Specifiying the same recipient more than once in the recipient list
+ *  Specifying the same recipient more than once in the recipient list
  *  is an error, which will not result in an error return but which may
  *  or may not result in more than one message being delivered to the
  *  recipient tile.
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index a1ee25be9ad..ea38f0c9ec7 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -36,7 +36,7 @@
  * Initialization flow and process
  * -------------------------------
  *
- * This files containes the routines to search for PCI buses,
+ * This files contains the routines to search for PCI buses,
  * enumerate the buses, and configure any attached devices.
  *
  * There are two entry points here:
@@ -519,7 +519,7 @@ static int __devinit tile_cfg_read(struct pci_bus *bus,
 
 
 /*
- * See tile_cfg_read() for relevent comments.
+ * See tile_cfg_read() for relevant comments.
  * Note that "val" is the value to write, not a pointer to that value.
  */
 static int __devinit tile_cfg_write(struct pci_bus *bus,
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index a4293102ef8..c52224d5ed4 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -189,12 +189,8 @@ void flush_icache_range(unsigned long start, unsigned long end)
 /* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */
 static irqreturn_t handle_reschedule_ipi(int irq, void *token)
 {
-	/*
-	 * Nothing to do here; when we return from interrupt, the
-	 * rescheduling will occur there. But do bump the interrupt
-	 * profiler count in the meantime.
-	 */
 	__get_cpu_var(irq_stat).irq_resched_count++;
+	scheduler_ipi();
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index 758f597f488..51f8663bf07 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -290,7 +290,7 @@ static int handle_page_fault(struct pt_regs *regs,
 	/*
 	 * Early on, we need to check for migrating PTE entries;
 	 * see homecache.c.  If we find a migrating PTE, we wait until
-	 * the backing page claims to be done migrating, then we procede.
+	 * the backing page claims to be done migrating, then we proceed.
 	 * For kernel PTEs, we rewrite the PTE and return and retry.
 	 * Otherwise, we treat the fault like a normal "no PTE" fault,
 	 * rather than trying to patch up the existing PTE.
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
index 201a582c413..42cfcba4e1e 100644
--- a/arch/tile/mm/hugetlbpage.c
+++ b/arch/tile/mm/hugetlbpage.c
@@ -219,7 +219,7 @@ try_again:
 	if (mm->free_area_cache < len)
 		goto fail;
 
-	/* either no address requested or cant fit in requested address hole */
+	/* either no address requested or can't fit in requested address hole */
 	addr = (mm->free_area_cache - len) & huge_page_mask(h);
 	do {
 		/*
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 109ddc0071c..a9234838e8a 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -7,7 +7,6 @@ config UML
 	bool
 	default y
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config MMU
diff --git a/arch/um/Kconfig.net b/arch/um/Kconfig.net
index 9e9a4aaa703..3160b1a5adb 100644
--- a/arch/um/Kconfig.net
+++ b/arch/um/Kconfig.net
@@ -186,7 +186,7 @@ config UML_NET_SLIRP
         other transports, SLiRP works without the need of root level
         privleges, setuid binaries, or SLIP devices on the host.  This
         also means not every type of connection is possible, but most
-        situations can be accomodated with carefully crafted slirp
+        situations can be accommodated with carefully crafted slirp
         commands that can be passed along as part of the network device's
         setup string.  The effect of this transport on the UML is similar
         that of a host behind a firewall that masquerades all network
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
index 90a438acbfa..b5e675e370c 100644
--- a/arch/um/Kconfig.um
+++ b/arch/um/Kconfig.um
@@ -47,7 +47,7 @@ config HOSTFS
 
 config HPPFS
 	tristate "HoneyPot ProcFS (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on EXPERIMENTAL && PROC_FS
 	help
 	  hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
 	  entries to be overridden, removed, or fabricated from the host.
diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86
index 02fb017fed4..a9da516a527 100644
--- a/arch/um/Kconfig.x86
+++ b/arch/um/Kconfig.x86
@@ -4,6 +4,10 @@ menu "UML-specific options"
 
 menu "Host processor type and features"
 
+config CMPXCHG_LOCAL
+	bool
+	default n
+
 source "arch/x86/Kconfig.cpu"
 
 endmenu
diff --git a/arch/um/include/asm/bug.h b/arch/um/include/asm/bug.h
new file mode 100644
index 00000000000..9e33b864c35
--- /dev/null
+++ b/arch/um/include/asm/bug.h
@@ -0,0 +1,6 @@
+#ifndef __UM_BUG_H
+#define __UM_BUG_H
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index e2cf786bda0..5bd1bad33fa 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -49,7 +49,10 @@ static inline struct thread_info *current_thread_info(void)
 {
 	struct thread_info *ti;
 	unsigned long mask = THREAD_SIZE - 1;
-	ti = (struct thread_info *) (((unsigned long) &ti) & ~mask);
+	void *p;
+
+	asm volatile ("" : "=r" (p) : "0" (&ti));
+	ti = (struct thread_info *) (((unsigned long)p) & ~mask);
 	return ti;
 }
 
diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c
index 106bf27e2a9..eefb107d2d7 100644
--- a/arch/um/kernel/smp.c
+++ b/arch/um/kernel/smp.c
@@ -173,7 +173,7 @@ void IPI_handler(int cpu)
 			break;
 
 		case 'R':
-			set_tsk_need_resched(current);
+			scheduler_ipi();
 			break;
 
 		case 'S':
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index 6ea77979531..42827cafa6a 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -5,6 +5,7 @@
 
 #include <stdio.h>
 #include <stdlib.h>
+#include <unistd.h>
 #include <errno.h>
 #include <signal.h>
 #include <string.h>
@@ -75,6 +76,26 @@ void setup_hostinfo(char *buf, int len)
 		 host.release, host.version, host.machine);
 }
 
+/*
+ * We cannot use glibc's abort(). It makes use of tgkill() which
+ * has no effect within UML's kernel threads.
+ * After that glibc would execute an invalid instruction to kill
+ * the calling process and UML crashes with SIGSEGV.
+ */
+static inline void __attribute__ ((noreturn)) uml_abort(void)
+{
+	sigset_t sig;
+
+	fflush(NULL);
+
+	if (!sigemptyset(&sig) && !sigaddset(&sig, SIGABRT))
+		sigprocmask(SIG_UNBLOCK, &sig, 0);
+
+	for (;;)
+		if (kill(getpid(), SIGABRT) < 0)
+			exit(127);
+}
+
 void os_dump_core(void)
 {
 	int pid;
@@ -116,5 +137,5 @@ void os_dump_core(void)
 	while ((pid = waitpid(-1, NULL, WNOHANG | __WALL)) > 0)
 		os_kill_ptraced_process(pid, 0);
 
-	abort();
+	uml_abort();
 }
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 804b28dd032..b1da91c1b20 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -4,7 +4,7 @@
 
 obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
 	ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \
-	sys_call_table.o tls.o
+	sys_call_table.o tls.o atomic64_cx8_32.o
 
 obj-$(CONFIG_BINFMT_ELF) += elfcore.o
 
diff --git a/arch/um/sys-i386/atomic64_cx8_32.S b/arch/um/sys-i386/atomic64_cx8_32.S
new file mode 100644
index 00000000000..1e901d3d4a9
--- /dev/null
+++ b/arch/um/sys-i386/atomic64_cx8_32.S
@@ -0,0 +1,225 @@
+/*
+ * atomic64_t for 586+
+ *
+ * Copied from arch/x86/lib/atomic64_cx8_32.S
+ *
+ * Copyright © 2010  Luca Barbieri
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/dwarf2.h>
+
+.macro SAVE reg
+	pushl_cfi %\reg
+	CFI_REL_OFFSET \reg, 0
+.endm
+
+.macro RESTORE reg
+	popl_cfi %\reg
+	CFI_RESTORE \reg
+.endm
+
+.macro read64 reg
+	movl %ebx, %eax
+	movl %ecx, %edx
+/* we need LOCK_PREFIX since otherwise cmpxchg8b always does the write */
+	LOCK_PREFIX
+	cmpxchg8b (\reg)
+.endm
+
+ENTRY(atomic64_read_cx8)
+	CFI_STARTPROC
+
+	read64 %ecx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_read_cx8)
+
+ENTRY(atomic64_set_cx8)
+	CFI_STARTPROC
+
+1:
+/* we don't need LOCK_PREFIX since aligned 64-bit writes
+ * are atomic on 586 and newer */
+	cmpxchg8b (%esi)
+	jne 1b
+
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_set_cx8)
+
+ENTRY(atomic64_xchg_cx8)
+	CFI_STARTPROC
+
+	movl %ebx, %eax
+	movl %ecx, %edx
+1:
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_xchg_cx8)
+
+.macro addsub_return func ins insc
+ENTRY(atomic64_\func\()_return_cx8)
+	CFI_STARTPROC
+	SAVE ebp
+	SAVE ebx
+	SAVE esi
+	SAVE edi
+
+	movl %eax, %esi
+	movl %edx, %edi
+	movl %ecx, %ebp
+
+	read64 %ebp
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	\ins\()l %esi, %ebx
+	\insc\()l %edi, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%ebp)
+	jne 1b
+
+10:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE edi
+	RESTORE esi
+	RESTORE ebx
+	RESTORE ebp
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_\func\()_return_cx8)
+.endm
+
+addsub_return add add adc
+addsub_return sub sub sbb
+
+.macro incdec_return func ins insc
+ENTRY(atomic64_\func\()_return_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	\ins\()l $1, %ebx
+	\insc\()l $0, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+10:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE ebx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_\func\()_return_cx8)
+.endm
+
+incdec_return inc add adc
+incdec_return dec sub sbb
+
+ENTRY(atomic64_dec_if_positive_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	subl $1, %ebx
+	sbb $0, %ecx
+	js 2f
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+2:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE ebx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_dec_if_positive_cx8)
+
+ENTRY(atomic64_add_unless_cx8)
+	CFI_STARTPROC
+	SAVE ebp
+	SAVE ebx
+/* these just push these two parameters on the stack */
+	SAVE edi
+	SAVE esi
+
+	movl %ecx, %ebp
+	movl %eax, %esi
+	movl %edx, %edi
+
+	read64 %ebp
+1:
+	cmpl %eax, 0(%esp)
+	je 4f
+2:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	addl %esi, %ebx
+	adcl %edi, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%ebp)
+	jne 1b
+
+	movl $1, %eax
+3:
+	addl $8, %esp
+	CFI_ADJUST_CFA_OFFSET -8
+	RESTORE ebx
+	RESTORE ebp
+	ret
+4:
+	cmpl %edx, 4(%esp)
+	jne 2b
+	xorl %eax, %eax
+	jmp 3b
+	CFI_ENDPROC
+ENDPROC(atomic64_add_unless_cx8)
+
+ENTRY(atomic64_inc_not_zero_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	testl %eax, %eax
+	je 4f
+2:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	addl $1, %ebx
+	adcl $0, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+	movl $1, %eax
+3:
+	RESTORE ebx
+	ret
+4:
+	testl %edx, %edx
+	jne 2b
+	jmp 3b
+	CFI_ENDPROC
+ENDPROC(atomic64_inc_not_zero_cx8)
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 04e024919b2..d3a303246c9 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -10,7 +10,6 @@ config UNICORE32
 	select HAVE_KERNEL_LZMA
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_IRQ_PROBE
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_FRAME_POINTERS
 	help
diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile
index e08d6d370a8..76a8beec7d0 100644
--- a/arch/unicore32/Makefile
+++ b/arch/unicore32/Makefile
@@ -48,7 +48,7 @@ ASM_GENERIC_HEADERS	+= bitsperlong.h bug.h bugs.h
 ASM_GENERIC_HEADERS	+= cputime.h current.h
 ASM_GENERIC_HEADERS	+= device.h div64.h
 ASM_GENERIC_HEADERS	+= emergency-restart.h errno.h
-ASM_GENERIC_HEADERS	+= fb.h fcntl.h ftrace.h
+ASM_GENERIC_HEADERS	+= fb.h fcntl.h ftrace.h futex.h
 ASM_GENERIC_HEADERS	+= hardirq.h hw_irq.h
 ASM_GENERIC_HEADERS	+= ioctl.h ioctls.h ipcbuf.h irq_regs.h
 ASM_GENERIC_HEADERS	+= kdebug.h kmap_types.h
diff --git a/arch/unicore32/include/asm/futex.h b/arch/unicore32/include/asm/futex.h
deleted file mode 100644
index 07dea617055..00000000000
--- a/arch/unicore32/include/asm/futex.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/unicore32/include/asm/futex.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __UNICORE_FUTEX_H__
-#define __UNICORE_FUTEX_H__
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/preempt.h>
-#include <linux/uaccess.h>
-#include <linux/errno.h>
-
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
-	__asm__ __volatile__(					\
-	"1:	ldw.u	%1, [%2]\n"				\
-	"	" insn "\n"					\
-	"2:	stw.u	%0, [%2]\n"				\
-	"	mov	%0, #0\n"				\
-	"3:\n"							\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 4f, 2b, 4f\n"			\
-	"	.popsection\n"					\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"4:	mov	%0, %4\n"				\
-	"	b	3b\n"					\
-	"	.popsection"					\
-	: "=&r" (ret), "=&r" (oldval)				\
-	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
-	: "cc", "memory")
-
-static inline int
-futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
-
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	pagefault_disable();	/* implies preempt_disable() */
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op("or	%0, %1, %3", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3",
-				ret, oldval, uaddr, ~oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op("xor	%0, %1, %3", ret, oldval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	pagefault_enable();	/* subsumes preempt_enable() */
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (oldval == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (oldval != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (oldval <  cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (oldval >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (oldval <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (oldval >  cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
-	int val;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	pagefault_disable();	/* implies preempt_disable() */
-
-	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	ldw.u	%0, [%3]\n"
-	"	cmpxor.a	%0, %1\n"
-	"	bne	3f\n"
-	"2:	stw.u	%2, [%3]\n"
-	"3:\n"
-	"	.pushsection __ex_table,\"a\"\n"
-	"	.align	3\n"
-	"	.long	1b, 4f, 2b, 4f\n"
-	"	.popsection\n"
-	"	.pushsection .fixup,\"ax\"\n"
-	"4:	mov	%0, %4\n"
-	"	b	3b\n"
-	"	.popsection"
-	: "=&r" (val)
-	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
-	: "cc", "memory");
-
-	pagefault_enable();	/* subsumes preempt_enable() */
-
-	return val;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __UNICORE_FUTEX_H__ */
diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h
index a18bdc3810e..8040d575ddd 100644
--- a/arch/unicore32/include/mach/PKUnity.h
+++ b/arch/unicore32/include/mach/PKUnity.h
@@ -24,16 +24,6 @@
 #define PKUNITY_MMIO_BASE		0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */
 
 /*
- * PKUNITY Memory Map Addresses: 0x0D000000 - 0x0EFFFFFF (32MB)
- *	0x0D000000 - 0x0DFFFFFF 16MB: for UVC
- *	0x0E000000 - 0x0EFFFFFF 16MB: for UNIGFX
- */
-#define PKUNITY_UVC_MMAP_BASE		0x0D000000
-#define PKUNITY_UVC_MMAP_SIZE		0x01000000 /* 16MB */
-#define PKUNITY_UNIGFX_MMAP_BASE        0x0E000000
-#define PKUNITY_UNIGFX_MMAP_SIZE        0x01000000 /* 16MB */
-
-/*
  * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB)
  * 0x80000000 - 0x8000000B 12B    PCI Configuration regs
  * 0x80010000 - 0x80010250 592B   PCI Bridge Base
diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h
index 0bf21c94471..4be72c21d49 100644
--- a/arch/unicore32/include/mach/memory.h
+++ b/arch/unicore32/include/mach/memory.h
@@ -50,7 +50,6 @@ void puv3_pci_adjust_zones(unsigned long *size, unsigned long *holes);
 
 /* kuser area */
 #define KUSER_VECPAGE_BASE	(KUSER_BASE + UL(0x3fff0000))
-#define KUSER_UNIGFX_BASE	(PAGE_OFFSET + PKUNITY_UNIGFX_MMAP_BASE)
 /* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */
 #define kuser_vecpage_to_vectors(x)	((x) - (KUSER_VECPAGE_BASE)	\
 					+ (VECTORS_BASE))
diff --git a/arch/unicore32/include/mach/regs-umal.h b/arch/unicore32/include/mach/regs-umal.h
index 885bb62fee7..aa22df74e11 100644
--- a/arch/unicore32/include/mach/regs-umal.h
+++ b/arch/unicore32/include/mach/regs-umal.h
@@ -52,7 +52,7 @@
  */
 #define UMAL_MIISTATUS		(PKUNITY_UMAL_BASE + 0x0030)
 /*
- * MII Managment Indicator UMAL_MIIIDCT
+ * MII Management Indicator UMAL_MIIIDCT
  */
 #define UMAL_MIIIDCT		(PKUNITY_UMAL_BASE + 0x0034)
 /*
@@ -91,7 +91,7 @@
 #define UMAL_FIFORAM6		(PKUNITY_UMAL_BASE + 0x0078)
 #define UMAL_FIFORAM7		(PKUNITY_UMAL_BASE + 0x007c)
 
-/* MAHBE MODUEL OF UMAL */
+/* MAHBE MODULE OF UMAL */
 /* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master
  * and Slave ports.Registers within the M-AHBE provide Control and Status
  * information concerning these transfers.
diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S
index 92255f3ab6a..8caf322e110 100644
--- a/arch/unicore32/kernel/head.S
+++ b/arch/unicore32/kernel/head.S
@@ -164,7 +164,7 @@ ENTRY(stext)
 ENDPROC(stext)
 
 /*
- * Enable the MMU.  This completely changes the stucture of the visible
+ * Enable the MMU.  This completely changes the structure of the visible
  * memory space.  You will not be able to trace execution through this.
  *
  *  r0  = cp#0 control register
diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c
index 2aa30a364bb..d4efa7d679f 100644
--- a/arch/unicore32/kernel/irq.c
+++ b/arch/unicore32/kernel/irq.c
@@ -23,7 +23,7 @@
 #include <linux/list.h>
 #include <linux/kallsyms.h>
 #include <linux/proc_fs.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/gpio.h>
 
 #include <asm/system.h>
@@ -237,7 +237,7 @@ static struct puv3_irq_state {
 	unsigned int	iccr;
 } puv3_irq_state;
 
-static int puv3_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int puv3_irq_suspend(void)
 {
 	struct puv3_irq_state *st = &puv3_irq_state;
 
@@ -265,7 +265,7 @@ static int puv3_irq_suspend(struct sys_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int puv3_irq_resume(struct sys_device *dev)
+static void puv3_irq_resume(void)
 {
 	struct puv3_irq_state *st = &puv3_irq_state;
 
@@ -278,27 +278,20 @@ static int puv3_irq_resume(struct sys_device *dev)
 
 		writel(st->icmr, INTC_ICMR);
 	}
-	return 0;
 }
 
-static struct sysdev_class puv3_irq_sysclass = {
-	.name		= "pkunity-irq",
+static struct syscore_ops puv3_irq_syscore_ops = {
 	.suspend	= puv3_irq_suspend,
 	.resume		= puv3_irq_resume,
 };
 
-static struct sys_device puv3_irq_device = {
-	.id		= 0,
-	.cls		= &puv3_irq_sysclass,
-};
-
-static int __init puv3_irq_init_devicefs(void)
+static int __init puv3_irq_init_syscore(void)
 {
-	sysdev_class_register(&puv3_irq_sysclass);
-	return sysdev_register(&puv3_irq_device);
+	register_syscore_ops(&puv3_irq_syscore_ops);
+	return 0;
 }
 
-device_initcall(puv3_irq_init_devicefs);
+device_initcall(puv3_irq_init_syscore);
 
 void __init init_IRQ(void)
 {
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
index 8b1b6beb858..1a505a78776 100644
--- a/arch/unicore32/kernel/puv3-core.c
+++ b/arch/unicore32/kernel/puv3-core.c
@@ -99,11 +99,6 @@ static struct resource puv3_unigfx_resources[] = {
 		.end	= io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= PKUNITY_UNIGFX_MMAP_BASE,
-		.end	= PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
 };
 
 static struct resource puv3_rtc_resources[] = {
diff --git a/arch/unicore32/kernel/rtc.c b/arch/unicore32/kernel/rtc.c
index c5f068295b5..8cad70b3302 100644
--- a/arch/unicore32/kernel/rtc.c
+++ b/arch/unicore32/kernel/rtc.c
@@ -88,11 +88,6 @@ static int puv3_rtc_setpie(struct device *dev, int enabled)
 	return 0;
 }
 
-static int puv3_rtc_setfreq(struct device *dev, int freq)
-{
-	return 0;
-}
-
 /* Time read/write */
 
 static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
@@ -214,8 +209,6 @@ static const struct rtc_class_ops puv3_rtcops = {
 	.set_time	= puv3_rtc_settime,
 	.read_alarm	= puv3_rtc_getalarm,
 	.set_alarm	= puv3_rtc_setalarm,
-	.irq_set_freq	= puv3_rtc_setfreq,
-	.irq_set_state	= puv3_rtc_setpie,
 	.proc	        = puv3_rtc_proc,
 };
 
@@ -294,8 +287,6 @@ static int puv3_rtc_probe(struct platform_device *pdev)
 
 	puv3_rtc_enable(pdev, 1);
 
-	puv3_rtc_setfreq(&pdev->dev, 1);
-
 	/* register RTC and exit */
 
 	rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops,
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
index 1e175a82844..471b6bca8da 100644
--- a/arch/unicore32/kernel/setup.c
+++ b/arch/unicore32/kernel/setup.c
@@ -64,12 +64,6 @@ static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
  */
 static struct resource mem_res[] = {
 	{
-		.name = "Video RAM",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_MEM
-	},
-	{
 		.name = "Kernel text",
 		.start = 0,
 		.end = 0,
@@ -83,9 +77,8 @@ static struct resource mem_res[] = {
 	}
 };
 
-#define video_ram   mem_res[0]
-#define kernel_code mem_res[1]
-#define kernel_data mem_res[2]
+#define kernel_code mem_res[0]
+#define kernel_data mem_res[1]
 
 /*
  * These functions re-use the assembly code in head.S, which
@@ -224,10 +217,6 @@ request_standard_resources(struct meminfo *mi)
 		    kernel_data.end <= res->end)
 			request_resource(res, &kernel_data);
 	}
-
-	video_ram.start = PKUNITY_UNIGFX_MMAP_BASE;
-	video_ram.end   = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE;
-	request_resource(&iomem_resource, &video_ram);
 }
 
 static void (*init_machine)(void) __initdata;
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
index 25abbb10172..b9a26465e72 100644
--- a/arch/unicore32/kernel/traps.c
+++ b/arch/unicore32/kernel/traps.c
@@ -22,7 +22,6 @@
 #include <linux/delay.h>
 #include <linux/hardirq.h>
 #include <linux/init.h>
-#include <linux/uaccess.h>
 #include <linux/atomic.h>
 #include <linux/unistd.h>
 
@@ -193,7 +192,6 @@ static int __die(const char *str, int err, struct thread_info *thread,
 
 	printk(KERN_EMERG "Internal error: %s: %x [#%d]\n",
 	       str, err, ++die_counter);
-	sysfs_printk_last_file();
 
 	/* trap and error numbers are mostly meaningless on UniCore */
 	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
index 0b4eb89729e..9bf7f7af52c 100644
--- a/arch/unicore32/kernel/vmlinux.lds.S
+++ b/arch/unicore32/kernel/vmlinux.lds.S
@@ -14,6 +14,7 @@
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
+#include <asm/cache.h>
 
 OUTPUT_ARCH(unicore32)
 ENTRY(stext)
@@ -29,7 +30,7 @@ SECTIONS
 	HEAD_TEXT_SECTION
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	INIT_DATA_SECTION(16)
-	PERCPU(PAGE_SIZE)
+	PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
 	__init_end = .;
 
 	_stext = .;
@@ -45,10 +46,10 @@ SECTIONS
 
 	_sdata = .;
 	RO_DATA_SECTION(PAGE_SIZE)
-	RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 	_edata = .;
 
-	EXCEPTION_TABLE(32)
+	EXCEPTION_TABLE(L1_CACHE_BYTES)
 	NOTES
 
 	BSS_SECTION(0, 0, 0)
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
index 7bf3d588631..db2d334941b 100644
--- a/arch/unicore32/mm/mmu.c
+++ b/arch/unicore32/mm/mmu.c
@@ -338,15 +338,6 @@ void __init uc32_mm_memblock_reserve(void)
 	 * and can only be in node 0.
 	 */
 	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
-
-#ifdef CONFIG_PUV3_UNIGFX
-	/*
-	 * These should likewise go elsewhere.  They pre-reserve the
-	 * screen/video memory region at the 48M~64M of main system memory.
-	 */
-	memblock_reserve(PKUNITY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE);
-	memblock_reserve(PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE);
-#endif
 }
 
 /*
@@ -371,17 +362,6 @@ static void __init devicemaps_init(void)
 		pmd_clear(pmd_off_k(addr));
 
 	/*
-	 * Create a mapping for UniGFX VRAM
-	 */
-#ifdef CONFIG_PUV3_UNIGFX
-	map.pfn = __phys_to_pfn(PKUNITY_UNIGFX_MMAP_BASE);
-	map.virtual = KUSER_UNIGFX_BASE;
-	map.length = PKUNITY_UNIGFX_MMAP_SIZE;
-	map.type = MT_KUSER;
-	create_mapping(&map);
-#endif
-
-	/*
 	 * Create a mapping for the machine vectors at the high-vectors
 	 * location (0xffff0000).  If we aren't using high-vectors, also
 	 * create a mapping at the low-vectors virtual address.
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index 0e103236b75..0e9dec6cadd 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -15,3 +15,4 @@ obj-y += vdso/
 obj-$(CONFIG_IA32_EMULATION) += ia32/
 
 obj-y += platform/
+obj-y += net/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cc6c53a95bf..880fcb6c86f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -8,6 +8,7 @@ config 64BIT
 
 config X86_32
 	def_bool !64BIT
+	select CLKSRC_I8253
 
 config X86_64
 	def_bool 64BIT
@@ -71,7 +72,7 @@ config X86
 	select GENERIC_IRQ_SHOW
 	select IRQ_FORCED_THREADING
 	select USE_GENERIC_SMP_HELPERS if SMP
-	select ARCH_NO_SYSDEV_OPS
+	select HAVE_BPF_JIT if (X86_64 && NET)
 
 config INSTRUCTION_DECODER
 	def_bool (KPROBES || PERF_EVENTS)
@@ -112,7 +113,14 @@ config MMU
 	def_bool y
 
 config ZONE_DMA
-	def_bool y
+	bool "DMA memory allocation support" if EXPERT
+	default y
+	help
+	  DMA memory allocation support allows devices with less than 32-bit
+	  addressing to allocate within the first 16MB of address space.
+	  Disable if no such devices will be used.
+
+	  If unsure, say Y.
 
 config SBUS
 	bool
@@ -365,17 +373,6 @@ config X86_UV
 # Following is an alphabetically sorted list of 32 bit extended platforms
 # Please maintain the alphabetic order if and when there are additions
 
-config X86_ELAN
-	bool "AMD Elan"
-	depends on X86_32
-	depends on X86_EXTENDED_PLATFORM
-	---help---
-	  Select this for an AMD Elan processor.
-
-	  Do not use this option for K6/Athlon/Opteron processors!
-
-	  If unsure, choose "PC-compatible" instead.
-
 config X86_INTEL_CE
 	bool "CE4100 TV platform"
 	depends on PCI
@@ -690,6 +687,7 @@ config AMD_IOMMU
 	bool "AMD IOMMU support"
 	select SWIOTLB
 	select PCI_MSI
+	select PCI_IOV
 	depends on X86_64 && PCI && ACPI
 	---help---
 	  With this option you can enable support for AMD IOMMU hardware in
@@ -1174,7 +1172,7 @@ comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
 config AMD_NUMA
 	def_bool y
 	prompt "Old style AMD Opteron NUMA detection"
-	depends on X86_64 && NUMA && PCI
+	depends on NUMA && PCI
 	---help---
 	  Enable AMD NUMA node topology detection.  You should say Y here if
 	  you have a multi processor AMD system. This uses an old method to
@@ -1201,7 +1199,7 @@ config NODES_SPAN_OTHER_NODES
 
 config NUMA_EMU
 	bool "NUMA emulation"
-	depends on X86_64 && NUMA
+	depends on NUMA
 	---help---
 	  Enable NUMA emulation. A flat machine will be split
 	  into virtual nodes when booted with "numa=fake=N", where N is the
@@ -1223,6 +1221,10 @@ config HAVE_ARCH_BOOTMEM
 	def_bool y
 	depends on X86_32 && NUMA
 
+config HAVE_ARCH_ALLOC_REMAP
+	def_bool y
+	depends on X86_32 && NUMA
+
 config ARCH_HAVE_MEMORY_PRESENT
 	def_bool y
 	depends on X86_32 && DISCONTIGMEM
@@ -1231,13 +1233,9 @@ config NEED_NODE_MEMMAP_SIZE
 	def_bool y
 	depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
 
-config HAVE_ARCH_ALLOC_REMAP
-	def_bool y
-	depends on X86_32 && NUMA
-
 config ARCH_FLATMEM_ENABLE
 	def_bool y
-	depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
+	depends on X86_32 && !NUMA
 
 config ARCH_DISCONTIGMEM_ENABLE
 	def_bool y
@@ -1247,20 +1245,16 @@ config ARCH_DISCONTIGMEM_DEFAULT
 	def_bool y
 	depends on NUMA && X86_32
 
-config ARCH_PROC_KCORE_TEXT
-	def_bool y
-	depends on X86_64 && PROC_KCORE
-
-config ARCH_SPARSEMEM_DEFAULT
-	def_bool y
-	depends on X86_64
-
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD
 	select SPARSEMEM_STATIC if X86_32
 	select SPARSEMEM_VMEMMAP_ENABLE if X86_64
 
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
+	depends on X86_64
+
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 	depends on ARCH_SPARSEMEM_ENABLE
@@ -1269,6 +1263,10 @@ config ARCH_MEMORY_PROBE
 	def_bool X86_64
 	depends on MEMORY_HOTPLUG
 
+config ARCH_PROC_KCORE_TEXT
+	def_bool y
+	depends on X86_64 && PROC_KCORE
+
 config ILLEGAL_POINTER_VALUE
        hex
        default 0 if X86_32
@@ -1703,10 +1701,6 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 	def_bool y
 	depends on MEMORY_HOTPLUG
 
-config HAVE_ARCH_EARLY_PFN_TO_NID
-	def_bool X86_64
-	depends on NUMA
-
 config USE_PERCPU_NUMA_NODE_ID
 	def_bool y
 	depends on NUMA
@@ -1848,7 +1842,7 @@ config APM_ALLOW_INTS
 
 endif # APM
 
-source "arch/x86/kernel/cpu/cpufreq/Kconfig"
+source "drivers/cpufreq/Kconfig"
 
 source "drivers/cpuidle/Kconfig"
 
@@ -2076,7 +2070,7 @@ config OLPC
 	depends on !X86_PAE
 	select GPIOLIB
 	select OF
-	select OF_PROMTREE if PROC_DEVICETREE
+	select OF_PROMTREE
 	---help---
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index d161e939df6..6a7cfdf8ff6 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -1,6 +1,4 @@
 # Put here option for CPU selection and depending optimization
-if !X86_ELAN
-
 choice
 	prompt "Processor family"
 	default M686 if X86_32
@@ -203,6 +201,14 @@ config MWINCHIP3D
 	  stores for this CPU, which can increase performance of some
 	  operations.
 
+config MELAN
+	bool "AMD Elan"
+	depends on X86_32
+	---help---
+	  Select this for an AMD Elan processor.
+
+	  Do not use this option for K6/Athlon/Opteron processors!
+
 config MGEODEGX1
 	bool "GeodeGX1"
 	depends on X86_32
@@ -292,8 +298,6 @@ config X86_GENERIC
 	  This is really intended for distributors who need more
 	  generic optimizations.
 
-endif
-
 #
 # Define implied options from the CPU selection here
 config X86_INTERNODE_CACHE_SHIFT
@@ -312,7 +316,7 @@ config X86_L1_CACHE_SHIFT
 	int
 	default "7" if MPENTIUM4 || MPSC
 	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
-	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
+	default "4" if MELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
 
 config X86_XADD
@@ -358,7 +362,7 @@ config X86_POPAD_OK
 
 config X86_ALIGNMENT_16
 	def_bool y
-	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
 
 config X86_INTEL_USERCOPY
 	def_bool y
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index f2ee1abb1df..86cee7b749e 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -37,7 +37,7 @@ cflags-$(CONFIG_MATOM)		+= $(call cc-option,-march=atom,$(call cc-option,-march=
 	$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
 
 # AMD Elan support
-cflags-$(CONFIG_X86_ELAN)	+= -march=i486
+cflags-$(CONFIG_MELAN)		+= -march=i486
 
 # Geode GX1 support
 cflags-$(CONFIG_MGEODEGX1)	+= -march=pentium-mmx
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index cae3feb1035..db75d07c364 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -91,7 +91,7 @@ static int detect_memory_e801(void)
 	if (oreg.ax > 15*1024) {
 		return -1;	/* Bogus! */
 	} else if (oreg.ax == 15*1024) {
-		boot_params.alt_mem_k = (oreg.dx << 6) + oreg.ax;
+		boot_params.alt_mem_k = (oreg.bx << 6) + oreg.ax;
 	} else {
 		/*
 		 * This ignores memory above 16MB if we have a memory
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 849a9d23c71..95f5826be45 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -848,4 +848,5 @@ ia32_sys_call_table:
 	.quad compat_sys_open_by_handle_at
 	.quad compat_sys_clock_adjtime
 	.quad sys_syncfs
+	.quad compat_sys_sendmmsg	/* 345 */
 ia32_syscall_end:
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 12e0e7dd869..416d865eae3 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -183,8 +183,6 @@ static inline void disable_acpi(void) { }
 
 #define ARCH_HAS_POWER_INIT	1
 
-struct bootnode;
-
 #ifdef CONFIG_ACPI_NUMA
 extern int acpi_numa;
 extern int x86_acpi_numa_init(void);
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index a63a68be1cc..94d420b360d 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -15,4 +15,13 @@
 	.endm
 #endif
 
+.macro altinstruction_entry orig alt feature orig_len alt_len
+	.align 8
+	.quad \orig
+	.quad \alt
+	.word \feature
+	.byte \orig_len
+	.byte \alt_len
+.endm
+
 #endif  /*  __ASSEMBLY__  */
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 13009d1af99..bf535f947e8 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -4,7 +4,6 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/stringify.h>
-#include <linux/jump_label.h>
 #include <asm/asm.h>
 
 /*
@@ -191,12 +190,4 @@ extern void *text_poke(void *addr, const void *opcode, size_t len);
 extern void *text_poke_smp(void *addr, const void *opcode, size_t len);
 extern void text_poke_smp_batch(struct text_poke_param *params, int n);
 
-#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
-#define IDEAL_NOP_SIZE_5 5
-extern unsigned char ideal_nop5[IDEAL_NOP_SIZE_5];
-extern void arch_init_ideal_nop5(void);
-#else
-static inline void arch_init_ideal_nop5(void) {}
-#endif
-
 #endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h
index 916bc8111a0..55d95eb789b 100644
--- a/arch/x86/include/asm/amd_iommu_proto.h
+++ b/arch/x86/include/asm/amd_iommu_proto.h
@@ -19,13 +19,12 @@
 #ifndef _ASM_X86_AMD_IOMMU_PROTO_H
 #define _ASM_X86_AMD_IOMMU_PROTO_H
 
-struct amd_iommu;
+#include <asm/amd_iommu_types.h>
 
 extern int amd_iommu_init_dma_ops(void);
 extern int amd_iommu_init_passthrough(void);
+extern irqreturn_t amd_iommu_int_thread(int irq, void *data);
 extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
-extern void amd_iommu_flush_all_domains(void);
-extern void amd_iommu_flush_all_devices(void);
 extern void amd_iommu_apply_erratum_63(u16 devid);
 extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
 extern int amd_iommu_init_devices(void);
@@ -44,4 +43,12 @@ static inline bool is_rd890_iommu(struct pci_dev *pdev)
 	       (pdev->device == PCI_DEVICE_ID_RD890_IOMMU);
 }
 
+static inline bool iommu_feature(struct amd_iommu *iommu, u64 f)
+{
+	if (!(iommu->cap & (1 << IOMMU_CAP_EFR)))
+		return false;
+
+	return !!(iommu->features & f);
+}
+
 #endif /* _ASM_X86_AMD_IOMMU_PROTO_H  */
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index e3509fc303b..4c998299541 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -68,12 +68,25 @@
 #define MMIO_CONTROL_OFFSET     0x0018
 #define MMIO_EXCL_BASE_OFFSET   0x0020
 #define MMIO_EXCL_LIMIT_OFFSET  0x0028
+#define MMIO_EXT_FEATURES	0x0030
 #define MMIO_CMD_HEAD_OFFSET	0x2000
 #define MMIO_CMD_TAIL_OFFSET	0x2008
 #define MMIO_EVT_HEAD_OFFSET	0x2010
 #define MMIO_EVT_TAIL_OFFSET	0x2018
 #define MMIO_STATUS_OFFSET	0x2020
 
+
+/* Extended Feature Bits */
+#define FEATURE_PREFETCH	(1ULL<<0)
+#define FEATURE_PPR		(1ULL<<1)
+#define FEATURE_X2APIC		(1ULL<<2)
+#define FEATURE_NX		(1ULL<<3)
+#define FEATURE_GT		(1ULL<<4)
+#define FEATURE_IA		(1ULL<<6)
+#define FEATURE_GA		(1ULL<<7)
+#define FEATURE_HE		(1ULL<<8)
+#define FEATURE_PC		(1ULL<<9)
+
 /* MMIO status bits */
 #define MMIO_STATUS_COM_WAIT_INT_MASK	0x04
 
@@ -113,7 +126,9 @@
 /* command specific defines */
 #define CMD_COMPL_WAIT          0x01
 #define CMD_INV_DEV_ENTRY       0x02
-#define CMD_INV_IOMMU_PAGES     0x03
+#define CMD_INV_IOMMU_PAGES	0x03
+#define CMD_INV_IOTLB_PAGES	0x04
+#define CMD_INV_ALL		0x08
 
 #define CMD_COMPL_WAIT_STORE_MASK	0x01
 #define CMD_COMPL_WAIT_INT_MASK		0x02
@@ -215,6 +230,8 @@
 #define IOMMU_PTE_IR (1ULL << 61)
 #define IOMMU_PTE_IW (1ULL << 62)
 
+#define DTE_FLAG_IOTLB	0x01
+
 #define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
 #define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
 #define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
@@ -227,6 +244,7 @@
 /* IOMMU capabilities */
 #define IOMMU_CAP_IOTLB   24
 #define IOMMU_CAP_NPCACHE 26
+#define IOMMU_CAP_EFR     27
 
 #define MAX_DOMAIN_ID 65536
 
@@ -249,6 +267,8 @@ extern bool amd_iommu_dump;
 
 /* global flag if IOMMUs cache non-present entries */
 extern bool amd_iommu_np_cache;
+/* Only true if all IOMMUs support device IOTLBs */
+extern bool amd_iommu_iotlb_sup;
 
 /*
  * Make iterating over all IOMMUs easier
@@ -371,6 +391,9 @@ struct amd_iommu {
 	/* flags read from acpi table */
 	u8 acpi_flags;
 
+	/* Extended features */
+	u64 features;
+
 	/*
 	 * Capability pointer. There could be more than one IOMMU per PCI
 	 * device function if there are more than one AMD IOMMU capability
@@ -409,9 +432,6 @@ struct amd_iommu {
 	/* if one, we need to send a completion wait command */
 	bool need_sync;
 
-	/* becomes true if a command buffer reset is running */
-	bool reset_in_progress;
-
 	/* default dma_ops domain for that IOMMU */
 	struct dma_ops_domain *default_dom;
 
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index 331682231bb..67f87f25761 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -11,7 +11,6 @@ struct amd_nb_bus_dev_range {
 
 extern const struct pci_device_id amd_nb_misc_ids[];
 extern const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[];
-struct bootnode;
 
 extern bool early_is_amd_nb(u32 value);
 extern int amd_cache_northbridges(void);
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index a279d98ea95..a0c46f06121 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -2,7 +2,6 @@
 #define _ASM_X86_APIC_H
 
 #include <linux/cpumask.h>
-#include <linux/delay.h>
 #include <linux/pm.h>
 
 #include <asm/alternative.h>
@@ -364,7 +363,12 @@ struct apic {
 	 */
 	int (*x86_32_early_logical_apicid)(int cpu);
 
-	/* determine CPU -> NUMA node mapping */
+	/*
+	 * Optional method called from setup_local_APIC() after logical
+	 * apicid is guaranteed to be known to initialize apicid -> node
+	 * mapping if NUMA initialization hasn't done so already.  Don't
+	 * add new users.
+	 */
 	int (*x86_32_numa_cpu_node)(int cpu);
 #endif
 };
@@ -538,8 +542,6 @@ static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
 	return cpuid_apic >> index_msb;
 }
 
-extern int default_x86_32_numa_cpu_node(int cpu);
-
 #endif
 
 static inline unsigned int
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index d87988bacf3..34595d5e103 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -78,6 +78,7 @@
 #define		APIC_DEST_LOGICAL	0x00800
 #define		APIC_DEST_PHYSICAL	0x00000
 #define		APIC_DM_FIXED		0x00000
+#define		APIC_DM_FIXED_MASK	0x00700
 #define		APIC_DM_LOWEST		0x00100
 #define		APIC_DM_SMI		0x00200
 #define		APIC_DM_REMRD		0x00300
diff --git a/arch/x86/include/asm/bios_ebda.h b/arch/x86/include/asm/bios_ebda.h
index 3c7521063d3..aa6a3170ab5 100644
--- a/arch/x86/include/asm/bios_ebda.h
+++ b/arch/x86/include/asm/bios_ebda.h
@@ -4,16 +4,40 @@
 #include <asm/io.h>
 
 /*
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E.
+ * Returns physical address of EBDA.  Returns 0 if there is no EBDA.
  */
 static inline unsigned int get_bios_ebda(void)
 {
+	/*
+	 * There is a real-mode segmented pointer pointing to the
+	 * 4K EBDA area at 0x40E.
+	 */
 	unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
 	address <<= 4;
 	return address;	/* 0 means none */
 }
 
+/*
+ * Return the sanitized length of the EBDA in bytes, if it exists.
+ */
+static inline unsigned int get_bios_ebda_length(void)
+{
+	unsigned int address;
+	unsigned int length;
+
+	address = get_bios_ebda();
+	if (!address)
+		return 0;
+
+	/* EBDA length is byte 0 of the EBDA (stored in KiB) */
+	length = *(unsigned char *)phys_to_virt(address);
+	length <<= 10;
+
+	/* Trim the length if it extends beyond 640KiB */
+	length = min_t(unsigned int, (640 * 1024) - address, length);
+	return length;
+}
+
 void reserve_ebda_region(void);
 
 #ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 91f3e087cf2..5dc6acc98db 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -195,6 +195,8 @@
 
 /* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
 #define X86_FEATURE_FSGSBASE	(9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/
+#define X86_FEATURE_SMEP	(9*32+ 7) /* Supervisor Mode Execution Protection */
+#define X86_FEATURE_ERMS	(9*32+ 9) /* Enhanced REP MOVSB/STOSB */
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 
@@ -207,8 +209,7 @@ extern const char * const x86_power_flags[32];
 #define test_cpu_cap(c, bit)						\
 	 test_bit(bit, (unsigned long *)((c)->x86_capability))
 
-#define cpu_has(c, bit)							\
-	(__builtin_constant_p(bit) &&					\
+#define REQUIRED_MASK_BIT_SET(bit)					\
 	 ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) ||	\
 	   (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) ||	\
 	   (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) ||	\
@@ -218,10 +219,16 @@ extern const char * const x86_power_flags[32];
 	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ||	\
 	   (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) ||	\
 	   (((bit)>>5)==8 && (1UL<<((bit)&31) & REQUIRED_MASK8)) ||	\
-	   (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) )	\
-	  ? 1 :								\
+	   (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) )
+
+#define cpu_has(c, bit)							\
+	(__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 :	\
 	 test_cpu_cap(c, bit))
 
+#define this_cpu_has(bit)						\
+	(__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : 	\
+	 x86_this_cpu_test_bit(bit, (unsigned long *)&cpu_info.x86_capability))
+
 #define boot_cpu_has(bit)	cpu_has(&boot_cpu_data, bit)
 
 #define set_cpu_cap(c, bit)	set_bit(bit, (unsigned long *)((c)->x86_capability))
diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h
index 97b6d8114a4..0bdb0c54d9a 100644
--- a/arch/x86/include/asm/dma.h
+++ b/arch/x86/include/asm/dma.h
@@ -10,7 +10,6 @@
 
 #include <linux/spinlock.h>	/* And spinlocks */
 #include <asm/io.h>		/* need byte IO */
-#include <linux/delay.h>
 
 #ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
 #define dma_outb	outb_p
@@ -70,22 +69,18 @@
 
 #define MAX_DMA_CHANNELS	8
 
-#ifdef CONFIG_X86_32
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS      (PAGE_OFFSET + 0x1000000)
-
-#else
-
 /* 16MB ISA DMA zone */
 #define MAX_DMA_PFN   ((16 * 1024 * 1024) >> PAGE_SHIFT)
 
 /* 4GB broken PCI/AGP hardware bus master zone */
 #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
 
+#ifdef CONFIG_X86_32
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS      (PAGE_OFFSET + 0x1000000)
+#else
 /* Compat define for old dma zone */
 #define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT))
-
 #endif
 
 /* 8237 DMA controllers */
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 8e4a16508d4..7093e4a6a0b 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -90,6 +90,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
 #endif /* CONFIG_X86_32 */
 
 extern int add_efi_memmap;
+extern void efi_set_executable(efi_memory_desc_t *md, bool executable);
 extern void efi_memblock_x86_reserve_range(void);
 extern void efi_call_phys_prelog(void);
 extern void efi_call_phys_epilog(void);
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index db24c2278be..268c783ab1c 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -38,11 +38,10 @@ extern void mcount(void);
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
 	/*
-	 * call mcount is "e8 <4 byte offset>"
-	 * The addr points to the 4 byte offset and the caller of this
-	 * function wants the pointer to e8. Simply subtract one.
+	 * addr is the address of the mcount call instruction.
+	 * recordmcount does the necessary offset calculation.
 	 */
-	return addr - 1;
+	return addr;
 }
 
 #ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h
index 43085bfc99c..156cd5d18d2 100644
--- a/arch/x86/include/asm/gart.h
+++ b/arch/x86/include/asm/gart.h
@@ -66,7 +66,7 @@ static inline void gart_set_size_and_enable(struct pci_dev *dev, u32 order)
 	 * Don't enable translation but enable GART IO and CPU accesses.
 	 * Also, set DISTLBWALKPRB since GART tables memory is UC.
 	 */
-	ctl = DISTLBWALKPRB | order << 1;
+	ctl = order << 1;
 
 	pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
 }
@@ -75,17 +75,17 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
 {
 	u32 tmp, ctl;
 
-        /* address of the mappings table */
-        addr >>= 12;
-        tmp = (u32) addr<<4;
-        tmp &= ~0xf;
-        pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
-
-        /* Enable GART translation for this hammer. */
-        pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
-        ctl |= GARTEN;
-        ctl &= ~(DISGARTCPU | DISGARTIO);
-        pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
+	/* address of the mappings table */
+	addr >>= 12;
+	tmp = (u32) addr<<4;
+	tmp &= ~0xf;
+	pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
+
+	/* Enable GART translation for this hammer. */
+	pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
+	ctl |= GARTEN | DISTLBWALKPRB;
+	ctl &= ~(DISGARTCPU | DISGARTIO);
+	pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
 }
 
 static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index ef328901c80..c9e09ea0564 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -237,7 +237,7 @@ static inline void fpu_save_init(struct fpu *fpu)
 	} else if (use_fxsr()) {
 		fpu_fxsave(fpu);
 	} else {
-		asm volatile("fsave %[fx]; fwait"
+		asm volatile("fnsave %[fx]; fwait"
 			     : [fx] "=m" (fpu->state->fsave));
 		return;
 	}
diff --git a/arch/x86/include/asm/i8253.h b/arch/x86/include/asm/i8253.h
index fc1f579fb96..65aaa91d585 100644
--- a/arch/x86/include/asm/i8253.h
+++ b/arch/x86/include/asm/i8253.h
@@ -6,6 +6,8 @@
 #define PIT_CH0			0x40
 #define PIT_CH2			0x42
 
+#define PIT_LATCH	LATCH
+
 extern raw_spinlock_t i8253_lock;
 
 extern struct clock_event_device *global_clock_event;
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index c4bd267dfc5..a97a240f67f 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,7 +150,7 @@ void setup_IO_APIC_irq_extra(u32 gsi);
 extern void ioapic_and_gsi_init(void);
 extern void ioapic_insert_resources(void);
 
-int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr);
+int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr);
 
 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
 extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h
index 574dbc22893..a32b18ce6ea 100644
--- a/arch/x86/include/asm/jump_label.h
+++ b/arch/x86/include/asm/jump_label.h
@@ -5,20 +5,25 @@
 
 #include <linux/types.h>
 #include <asm/nops.h>
+#include <asm/asm.h>
 
 #define JUMP_LABEL_NOP_SIZE 5
 
-# define JUMP_LABEL_INITIAL_NOP ".byte 0xe9 \n\t .long 0\n\t"
-
-# define JUMP_LABEL(key, label)					\
-	do {							\
-		asm goto("1:"					\
-			JUMP_LABEL_INITIAL_NOP			\
-			".pushsection __jump_table,  \"aw\" \n\t"\
-			_ASM_PTR "1b, %l[" #label "], %c0 \n\t" \
-			".popsection \n\t"			\
-			: :  "i" (key) :  : label);		\
-	} while (0)
+#define JUMP_LABEL_INITIAL_NOP ".byte 0xe9 \n\t .long 0\n\t"
+
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+	asm goto("1:"
+		JUMP_LABEL_INITIAL_NOP
+		".pushsection __jump_table,  \"aw\" \n\t"
+		_ASM_ALIGN "\n\t"
+		_ASM_PTR "1b, %l[l_yes], %c0 \n\t"
+		".popsection \n\t"
+		: :  "i" (key) : : l_yes);
+	return false;
+l_yes:
+	return true;
+}
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index eb16e94ae04..021979a6e23 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -142,8 +142,6 @@ static inline void winchip_mcheck_init(struct cpuinfo_x86 *c) {}
 static inline void enable_p5_mce(void) {}
 #endif
 
-extern void (*x86_mce_decode_callback)(struct mce *m);
-
 void mce_setup(struct mce *m);
 void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, mce_dev);
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index 91df7c51806..5e83a416eca 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -13,31 +13,11 @@ extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
 
 #include <asm/numaq.h>
-/* summit or generic arch */
-#include <asm/srat.h>
-
-extern int get_memcfg_numa_flat(void);
-/*
- * This allows any one NUMA architecture to be compiled
- * for, and still fall back to the flat function if it
- * fails.
- */
-static inline void get_memcfg_numa(void)
-{
-
-	if (get_memcfg_numaq())
-		return;
-	if (get_memcfg_from_srat())
-		return;
-	get_memcfg_numa_flat();
-}
 
 extern void resume_map_numa_kva(pgd_t *pgd);
 
 #else /* !CONFIG_NUMA */
 
-#define get_memcfg_numa get_memcfg_numa_flat
-
 static inline void resume_map_numa_kva(pgd_t *pgd) {}
 
 #endif /* CONFIG_NUMA */
diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h
index 288b96f815a..b3f88d7867c 100644
--- a/arch/x86/include/asm/mmzone_64.h
+++ b/arch/x86/include/asm/mmzone_64.h
@@ -4,36 +4,13 @@
 #ifndef _ASM_X86_MMZONE_64_H
 #define _ASM_X86_MMZONE_64_H
 
-
 #ifdef CONFIG_NUMA
 
 #include <linux/mmdebug.h>
-
 #include <asm/smp.h>
 
-/* Simple perfect hash to map physical addresses to node numbers */
-struct memnode {
-	int shift;
-	unsigned int mapsize;
-	s16 *map;
-	s16 embedded_map[64 - 8];
-} ____cacheline_aligned; /* total size = 128 bytes */
-extern struct memnode memnode;
-#define memnode_shift memnode.shift
-#define memnodemap memnode.map
-#define memnodemapsize memnode.mapsize
-
 extern struct pglist_data *node_data[];
 
-static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
-{
-	unsigned nid;
-	VIRTUAL_BUG_ON(!memnodemap);
-	nid = memnodemap[addr >> memnode_shift];
-	VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
-	return nid;
-}
-
 #define NODE_DATA(nid)		(node_data[nid])
 
 #define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 67763c5d8b4..9eae7752ae9 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -35,7 +35,7 @@
 #define MODULE_PROC_FAMILY "K7 "
 #elif defined CONFIG_MK8
 #define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_X86_ELAN
+#elif defined CONFIG_MELAN
 #define MODULE_PROC_FAMILY "ELAN "
 #elif defined CONFIG_MCRUSOE
 #define MODULE_PROC_FAMILY "CRUSOE "
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index fd5a1f365c9..3cce71413d0 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -96,11 +96,15 @@
 #define MSR_IA32_MC0_ADDR		0x00000402
 #define MSR_IA32_MC0_MISC		0x00000403
 
+#define MSR_AMD64_MC0_MASK		0xc0010044
+
 #define MSR_IA32_MCx_CTL(x)		(MSR_IA32_MC0_CTL + 4*(x))
 #define MSR_IA32_MCx_STATUS(x)		(MSR_IA32_MC0_STATUS + 4*(x))
 #define MSR_IA32_MCx_ADDR(x)		(MSR_IA32_MC0_ADDR + 4*(x))
 #define MSR_IA32_MCx_MISC(x)		(MSR_IA32_MC0_MISC + 4*(x))
 
+#define MSR_AMD64_MCx_MASK(x)		(MSR_AMD64_MC0_MASK + (x))
+
 /* These are consecutive and not in the normal 4er MCE bank block */
 #define MSR_IA32_MC0_CTL2		0x00000280
 #define MSR_IA32_MCx_CTL2(x)		(MSR_IA32_MC0_CTL2 + (x))
diff --git a/arch/x86/include/asm/nops.h b/arch/x86/include/asm/nops.h
index af788496020..405b4032a60 100644
--- a/arch/x86/include/asm/nops.h
+++ b/arch/x86/include/asm/nops.h
@@ -1,7 +1,13 @@
 #ifndef _ASM_X86_NOPS_H
 #define _ASM_X86_NOPS_H
 
-/* Define nops for use with alternative() */
+/*
+ * Define nops for use with alternative() and for tracing.
+ *
+ * *_NOP5_ATOMIC must be a single instruction.
+ */
+
+#define NOP_DS_PREFIX 0x3e
 
 /* generic versions from gas
    1: nop
@@ -13,14 +19,15 @@
    6: leal 0x00000000(%esi),%esi
    7: leal 0x00000000(,%esi,1),%esi
 */
-#define GENERIC_NOP1 ".byte 0x90\n"
-#define GENERIC_NOP2 ".byte 0x89,0xf6\n"
-#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n"
-#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n"
-#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4
-#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7
+#define GENERIC_NOP1 0x90
+#define GENERIC_NOP2 0x89,0xf6
+#define GENERIC_NOP3 0x8d,0x76,0x00
+#define GENERIC_NOP4 0x8d,0x74,0x26,0x00
+#define GENERIC_NOP5 GENERIC_NOP1,GENERIC_NOP4
+#define GENERIC_NOP6 0x8d,0xb6,0x00,0x00,0x00,0x00
+#define GENERIC_NOP7 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00
+#define GENERIC_NOP8 GENERIC_NOP1,GENERIC_NOP7
+#define GENERIC_NOP5_ATOMIC NOP_DS_PREFIX,GENERIC_NOP4
 
 /* Opteron 64bit nops
    1: nop
@@ -29,13 +36,14 @@
    4: osp osp osp nop
 */
 #define K8_NOP1 GENERIC_NOP1
-#define K8_NOP2	".byte 0x66,0x90\n"
-#define K8_NOP3	".byte 0x66,0x66,0x90\n"
-#define K8_NOP4	".byte 0x66,0x66,0x66,0x90\n"
-#define K8_NOP5	K8_NOP3 K8_NOP2
-#define K8_NOP6	K8_NOP3 K8_NOP3
-#define K8_NOP7	K8_NOP4 K8_NOP3
-#define K8_NOP8	K8_NOP4 K8_NOP4
+#define K8_NOP2	0x66,K8_NOP1
+#define K8_NOP3	0x66,K8_NOP2
+#define K8_NOP4	0x66,K8_NOP3
+#define K8_NOP5	K8_NOP3,K8_NOP2
+#define K8_NOP6	K8_NOP3,K8_NOP3
+#define K8_NOP7	K8_NOP4,K8_NOP3
+#define K8_NOP8	K8_NOP4,K8_NOP4
+#define K8_NOP5_ATOMIC 0x66,K8_NOP4
 
 /* K7 nops
    uses eax dependencies (arbitrary choice)
@@ -47,13 +55,14 @@
    7: leal 0x00000000(,%eax,1),%eax
 */
 #define K7_NOP1	GENERIC_NOP1
-#define K7_NOP2	".byte 0x8b,0xc0\n"
-#define K7_NOP3	".byte 0x8d,0x04,0x20\n"
-#define K7_NOP4	".byte 0x8d,0x44,0x20,0x00\n"
-#define K7_NOP5	K7_NOP4 ASM_NOP1
-#define K7_NOP6	".byte 0x8d,0x80,0,0,0,0\n"
-#define K7_NOP7	".byte 0x8D,0x04,0x05,0,0,0,0\n"
-#define K7_NOP8	K7_NOP7 ASM_NOP1
+#define K7_NOP2	0x8b,0xc0
+#define K7_NOP3	0x8d,0x04,0x20
+#define K7_NOP4	0x8d,0x44,0x20,0x00
+#define K7_NOP5	K7_NOP4,K7_NOP1
+#define K7_NOP6	0x8d,0x80,0,0,0,0
+#define K7_NOP7	0x8D,0x04,0x05,0,0,0,0
+#define K7_NOP8	K7_NOP7,K7_NOP1
+#define K7_NOP5_ATOMIC NOP_DS_PREFIX,K7_NOP4
 
 /* P6 nops
    uses eax dependencies (Intel-recommended choice)
@@ -69,52 +78,65 @@
 	There is kernel code that depends on this.
 */
 #define P6_NOP1	GENERIC_NOP1
-#define P6_NOP2	".byte 0x66,0x90\n"
-#define P6_NOP3	".byte 0x0f,0x1f,0x00\n"
-#define P6_NOP4	".byte 0x0f,0x1f,0x40,0\n"
-#define P6_NOP5	".byte 0x0f,0x1f,0x44,0x00,0\n"
-#define P6_NOP6	".byte 0x66,0x0f,0x1f,0x44,0x00,0\n"
-#define P6_NOP7	".byte 0x0f,0x1f,0x80,0,0,0,0\n"
-#define P6_NOP8	".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n"
+#define P6_NOP2	0x66,0x90
+#define P6_NOP3	0x0f,0x1f,0x00
+#define P6_NOP4	0x0f,0x1f,0x40,0
+#define P6_NOP5	0x0f,0x1f,0x44,0x00,0
+#define P6_NOP6	0x66,0x0f,0x1f,0x44,0x00,0
+#define P6_NOP7	0x0f,0x1f,0x80,0,0,0,0
+#define P6_NOP8	0x0f,0x1f,0x84,0x00,0,0,0,0
+#define P6_NOP5_ATOMIC P6_NOP5
+
+#define _ASM_MK_NOP(x) ".byte " __stringify(x) "\n"
 
 #if defined(CONFIG_MK7)
-#define ASM_NOP1 K7_NOP1
-#define ASM_NOP2 K7_NOP2
-#define ASM_NOP3 K7_NOP3
-#define ASM_NOP4 K7_NOP4
-#define ASM_NOP5 K7_NOP5
-#define ASM_NOP6 K7_NOP6
-#define ASM_NOP7 K7_NOP7
-#define ASM_NOP8 K7_NOP8
+#define ASM_NOP1 _ASM_MK_NOP(K7_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(K7_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(K7_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(K7_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(K7_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(K7_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(K7_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(K7_NOP8)
+#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K7_NOP5_ATOMIC)
 #elif defined(CONFIG_X86_P6_NOP)
-#define ASM_NOP1 P6_NOP1
-#define ASM_NOP2 P6_NOP2
-#define ASM_NOP3 P6_NOP3
-#define ASM_NOP4 P6_NOP4
-#define ASM_NOP5 P6_NOP5
-#define ASM_NOP6 P6_NOP6
-#define ASM_NOP7 P6_NOP7
-#define ASM_NOP8 P6_NOP8
+#define ASM_NOP1 _ASM_MK_NOP(P6_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(P6_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(P6_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(P6_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(P6_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(P6_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(P6_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(P6_NOP8)
+#define ASM_NOP5_ATOMIC _ASM_MK_NOP(P6_NOP5_ATOMIC)
 #elif defined(CONFIG_X86_64)
-#define ASM_NOP1 K8_NOP1
-#define ASM_NOP2 K8_NOP2
-#define ASM_NOP3 K8_NOP3
-#define ASM_NOP4 K8_NOP4
-#define ASM_NOP5 K8_NOP5
-#define ASM_NOP6 K8_NOP6
-#define ASM_NOP7 K8_NOP7
-#define ASM_NOP8 K8_NOP8
+#define ASM_NOP1 _ASM_MK_NOP(K8_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(K8_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(K8_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(K8_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(K8_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(K8_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(K8_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(K8_NOP8)
+#define ASM_NOP5_ATOMIC _ASM_MK_NOP(K8_NOP5_ATOMIC)
 #else
-#define ASM_NOP1 GENERIC_NOP1
-#define ASM_NOP2 GENERIC_NOP2
-#define ASM_NOP3 GENERIC_NOP3
-#define ASM_NOP4 GENERIC_NOP4
-#define ASM_NOP5 GENERIC_NOP5
-#define ASM_NOP6 GENERIC_NOP6
-#define ASM_NOP7 GENERIC_NOP7
-#define ASM_NOP8 GENERIC_NOP8
+#define ASM_NOP1 _ASM_MK_NOP(GENERIC_NOP1)
+#define ASM_NOP2 _ASM_MK_NOP(GENERIC_NOP2)
+#define ASM_NOP3 _ASM_MK_NOP(GENERIC_NOP3)
+#define ASM_NOP4 _ASM_MK_NOP(GENERIC_NOP4)
+#define ASM_NOP5 _ASM_MK_NOP(GENERIC_NOP5)
+#define ASM_NOP6 _ASM_MK_NOP(GENERIC_NOP6)
+#define ASM_NOP7 _ASM_MK_NOP(GENERIC_NOP7)
+#define ASM_NOP8 _ASM_MK_NOP(GENERIC_NOP8)
+#define ASM_NOP5_ATOMIC _ASM_MK_NOP(GENERIC_NOP5_ATOMIC)
 #endif
 
 #define ASM_NOP_MAX 8
+#define NOP_ATOMIC5 (ASM_NOP_MAX+1)	/* Entry for the 5-byte atomic NOP */
+
+#ifndef __ASSEMBLY__
+extern const unsigned char * const *ideal_nops;
+extern void arch_init_ideal_nops(void);
+#endif
 
 #endif /* _ASM_X86_NOPS_H */
diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h
index 3d4dab43c99..bfacd2ccf65 100644
--- a/arch/x86/include/asm/numa.h
+++ b/arch/x86/include/asm/numa.h
@@ -1,12 +1,24 @@
 #ifndef _ASM_X86_NUMA_H
 #define _ASM_X86_NUMA_H
 
+#include <linux/nodemask.h>
+
 #include <asm/topology.h>
 #include <asm/apicdef.h>
 
 #ifdef CONFIG_NUMA
 
 #define NR_NODE_MEMBLKS		(MAX_NUMNODES*2)
+#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
+
+/*
+ * Too small node sizes may confuse the VM badly. Usually they
+ * result from BIOS bugs. So dont recognize nodes as standalone
+ * NUMA entities that have less than this amount of RAM listed:
+ */
+#define NODE_MIN_SIZE (4*1024*1024)
+
+extern int numa_off;
 
 /*
  * __apicid_to_node[] stores the raw mapping between physical apicid and
@@ -17,15 +29,27 @@
  * numa_cpu_node().
  */
 extern s16 __apicid_to_node[MAX_LOCAL_APIC];
+extern nodemask_t numa_nodes_parsed __initdata;
+
+extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
+extern void __init numa_set_distance(int from, int to, int distance);
 
 static inline void set_apicid_to_node(int apicid, s16 node)
 {
 	__apicid_to_node[apicid] = node;
 }
+
+extern int __cpuinit numa_cpu_node(int cpu);
+
 #else	/* CONFIG_NUMA */
 static inline void set_apicid_to_node(int apicid, s16 node)
 {
 }
+
+static inline int numa_cpu_node(int cpu)
+{
+	return NUMA_NO_NODE;
+}
 #endif	/* CONFIG_NUMA */
 
 #ifdef CONFIG_X86_32
@@ -37,21 +61,25 @@ static inline void set_apicid_to_node(int apicid, s16 node)
 #ifdef CONFIG_NUMA
 extern void __cpuinit numa_set_node(int cpu, int node);
 extern void __cpuinit numa_clear_node(int cpu);
-extern void __init numa_init_array(void);
 extern void __init init_cpu_to_node(void);
 extern void __cpuinit numa_add_cpu(int cpu);
 extern void __cpuinit numa_remove_cpu(int cpu);
 #else	/* CONFIG_NUMA */
 static inline void numa_set_node(int cpu, int node)	{ }
 static inline void numa_clear_node(int cpu)		{ }
-static inline void numa_init_array(void)		{ }
 static inline void init_cpu_to_node(void)		{ }
 static inline void numa_add_cpu(int cpu)		{ }
 static inline void numa_remove_cpu(int cpu)		{ }
 #endif	/* CONFIG_NUMA */
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
-struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable);
+void debug_cpumask_set_cpu(int cpu, int node, bool enable);
 #endif
 
+#ifdef CONFIG_NUMA_EMU
+#define FAKE_NODE_MIN_SIZE	((u64)32 << 20)
+#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
+void numa_emu_cmdline(char *);
+#endif /* CONFIG_NUMA_EMU */
+
 #endif	/* _ASM_X86_NUMA_H */
diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h
index c6beed1ef10..e7d6b825474 100644
--- a/arch/x86/include/asm/numa_32.h
+++ b/arch/x86/include/asm/numa_32.h
@@ -1,16 +1,6 @@
 #ifndef _ASM_X86_NUMA_32_H
 #define _ASM_X86_NUMA_32_H
 
-extern int numa_off;
-
-extern int pxm_to_nid(int pxm);
-
-#ifdef CONFIG_NUMA
-extern int __cpuinit numa_cpu_node(int cpu);
-#else	/* CONFIG_NUMA */
-static inline int numa_cpu_node(int cpu)		{ return NUMA_NO_NODE; }
-#endif	/* CONFIG_NUMA */
-
 #ifdef CONFIG_HIGHMEM
 extern void set_highmem_pages_init(void);
 #else
diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h
index 344eb1790b4..0c05f7ae46e 100644
--- a/arch/x86/include/asm/numa_64.h
+++ b/arch/x86/include/asm/numa_64.h
@@ -1,42 +1,6 @@
 #ifndef _ASM_X86_NUMA_64_H
 #define _ASM_X86_NUMA_64_H
 
-#include <linux/nodemask.h>
-
-struct bootnode {
-	u64 start;
-	u64 end;
-};
-
-#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
-
-extern int numa_off;
-
 extern unsigned long numa_free_all_bootmem(void);
-extern void setup_node_bootmem(int nodeid, unsigned long start,
-			       unsigned long end);
-
-#ifdef CONFIG_NUMA
-/*
- * Too small node sizes may confuse the VM badly. Usually they
- * result from BIOS bugs. So dont recognize nodes as standalone
- * NUMA entities that have less than this amount of RAM listed:
- */
-#define NODE_MIN_SIZE (4*1024*1024)
-
-extern nodemask_t numa_nodes_parsed __initdata;
-
-extern int __cpuinit numa_cpu_node(int cpu);
-extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
-extern void __init numa_set_distance(int from, int to, int distance);
-
-#ifdef CONFIG_NUMA_EMU
-#define FAKE_NODE_MIN_SIZE	((u64)32 << 20)
-#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
-void numa_emu_cmdline(char *);
-#endif /* CONFIG_NUMA_EMU */
-#else
-static inline int numa_cpu_node(int cpu)		{ return NUMA_NO_NODE; }
-#endif
 
 #endif /* _ASM_X86_NUMA_64_H */
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
index 37c516545ec..c3b3c322fd8 100644
--- a/arch/x86/include/asm/numaq.h
+++ b/arch/x86/include/asm/numaq.h
@@ -29,7 +29,7 @@
 #ifdef CONFIG_X86_NUMAQ
 
 extern int found_numaq;
-extern int get_memcfg_numaq(void);
+extern int numaq_numa_init(void);
 extern int pci_numaq_init(void);
 
 extern void *xquad_portio;
@@ -166,11 +166,6 @@ struct sys_cfg_data {
 
 void numaq_tsc_disable(void);
 
-#else
-static inline int get_memcfg_numaq(void)
-{
-	return 0;
-}
 #endif /* CONFIG_X86_NUMAQ */
 #endif /* _ASM_X86_NUMAQ_H */
 
diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h
index c5d3a5abbb9..24487712e0b 100644
--- a/arch/x86/include/asm/olpc_ofw.h
+++ b/arch/x86/include/asm/olpc_ofw.h
@@ -26,15 +26,12 @@ extern void setup_olpc_ofw_pgd(void);
 /* check if OFW was detected during boot */
 extern bool olpc_ofw_present(void);
 
+extern void olpc_dt_build_devicetree(void);
+
 #else /* !CONFIG_OLPC */
 static inline void olpc_ofw_detect(void) { }
 static inline void setup_olpc_ofw_pgd(void) { }
-#endif /* !CONFIG_OLPC */
-
-#ifdef CONFIG_OF_PROMTREE
-extern void olpc_dt_build_devicetree(void);
-#else
 static inline void olpc_dt_build_devicetree(void) { }
-#endif
+#endif /* !CONFIG_OLPC */
 
 #endif /* _ASM_X86_OLPC_OFW_H */
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index d475b4398d8..53278b0dfdf 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -517,7 +517,7 @@ do {									\
 	typeof(o2) __o2 = o2;						\
 	typeof(o2) __n2 = n2;						\
 	typeof(o2) __dummy;						\
-	alternative_io("call this_cpu_cmpxchg16b_emu\n\t" P6_NOP4,	\
+	alternative_io("call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP4,	\
 		       "cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t",	\
 		       X86_FEATURE_CX16,				\
 		       ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)),		\
@@ -542,6 +542,33 @@ do {									\
 	old__;								\
 })
 
+static __always_inline int x86_this_cpu_constant_test_bit(unsigned int nr,
+                        const unsigned long __percpu *addr)
+{
+	unsigned long __percpu *a = (unsigned long *)addr + nr / BITS_PER_LONG;
+
+	return ((1UL << (nr % BITS_PER_LONG)) & percpu_read(*a)) != 0;
+}
+
+static inline int x86_this_cpu_variable_test_bit(int nr,
+                        const unsigned long __percpu *addr)
+{
+	int oldbit;
+
+	asm volatile("bt "__percpu_arg(2)",%1\n\t"
+			"sbb %0,%0"
+			: "=r" (oldbit)
+			: "m" (*(unsigned long *)addr), "Ir" (nr));
+
+	return oldbit;
+}
+
+#define x86_this_cpu_test_bit(nr, addr)			\
+	(__builtin_constant_p((nr))			\
+	 ? x86_this_cpu_constant_test_bit((nr), (addr))	\
+	 : x86_this_cpu_variable_test_bit((nr), (addr)))
+
+
 #include <asm-generic/percpu.h>
 
 /* We can use this directly for local CPU (faster). */
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 7db7723d1f3..d56187c6b83 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -299,6 +299,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 /* Install a pte for a particular vaddr in kernel space. */
 void set_pte_vaddr(unsigned long vaddr, pte_t pte);
 
+extern void native_pagetable_reserve(u64 start, u64 end);
 #ifdef CONFIG_X86_32
 extern void native_pagetable_setup_start(pgd_t *base);
 extern void native_pagetable_setup_done(pgd_t *base);
diff --git a/arch/x86/include/asm/probe_roms.h b/arch/x86/include/asm/probe_roms.h
new file mode 100644
index 00000000000..4950a0b1d09
--- /dev/null
+++ b/arch/x86/include/asm/probe_roms.h
@@ -0,0 +1,8 @@
+#ifndef _PROBE_ROMS_H_
+#define _PROBE_ROMS_H_
+struct pci_dev;
+
+extern void __iomem *pci_map_biosrom(struct pci_dev *pdev);
+extern void pci_unmap_biosrom(void __iomem *rom);
+extern size_t pci_biosrom_size(struct pci_dev *pdev);
+#endif
diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
index a898a2b6e10..59ab4dffa37 100644
--- a/arch/x86/include/asm/processor-flags.h
+++ b/arch/x86/include/asm/processor-flags.h
@@ -60,6 +60,7 @@
 #define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
 #define X86_CR4_VMXE	0x00002000 /* enable VMX virtualization */
 #define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
+#define X86_CR4_SMEP	0x00100000 /* enable SMEP support */
 
 /*
  * x86-64 Task Priority Register, CR8
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index db8aa19a08a..9756551ec76 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -88,7 +88,7 @@ void *extend_brk(size_t size, size_t align);
  * executable.)
  */
 #define RESERVE_BRK(name,sz)						\
-	static void __section(.discard.text) __used			\
+	static void __section(.discard.text) __used notrace		\
 	__brk_reservation_fn_##name##__(void) {				\
 		asm volatile (						\
 			".pushsection .brk_reservation,\"aw\",@nobits;" \
@@ -104,10 +104,10 @@ void *extend_brk(size_t size, size_t align);
 	type *name;					\
 	RESERVE_BRK(name, sizeof(type) * entries)
 
+extern void probe_roms(void);
 #ifdef __i386__
 
 void __init i386_start_kernel(void);
-extern void probe_roms(void);
 
 #else
 void __init x86_64_start_kernel(char *real_mode);
diff --git a/arch/x86/include/asm/srat.h b/arch/x86/include/asm/srat.h
deleted file mode 100644
index b508d639d1a..00000000000
--- a/arch/x86/include/asm/srat.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Some of the code in this file has been gleaned from the 64 bit
- * discontigmem support code base.
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to Pat Gaughen <gone@us.ibm.com>
- */
-
-#ifndef _ASM_X86_SRAT_H
-#define _ASM_X86_SRAT_H
-
-#ifdef CONFIG_ACPI_NUMA
-extern int get_memcfg_from_srat(void);
-#else
-static inline int get_memcfg_from_srat(void)
-{
-	return 0;
-}
-#endif
-
-#endif /* _ASM_X86_SRAT_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index d7e89c83645..70bbe39043a 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -37,9 +37,6 @@ print_context_stack_bp(struct thread_info *tinfo,
 /* Generic stack tracer with callbacks */
 
 struct stacktrace_ops {
-	void (*warning)(void *data, char *msg);
-	/* msg must contain %s for the symbol */
-	void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
 	void (*address)(void *data, unsigned long address, int reliable);
 	/* On negative return stop dumping */
 	int (*stack)(void *data, char *name);
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 12569e691ce..c2ff2a1d845 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -303,24 +303,81 @@ static inline void native_wbinvd(void)
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
-#define read_cr0()	(native_read_cr0())
-#define write_cr0(x)	(native_write_cr0(x))
-#define read_cr2()	(native_read_cr2())
-#define write_cr2(x)	(native_write_cr2(x))
-#define read_cr3()	(native_read_cr3())
-#define write_cr3(x)	(native_write_cr3(x))
-#define read_cr4()	(native_read_cr4())
-#define read_cr4_safe()	(native_read_cr4_safe())
-#define write_cr4(x)	(native_write_cr4(x))
-#define wbinvd()	(native_wbinvd())
+
+static inline unsigned long read_cr0(void)
+{
+	return native_read_cr0();
+}
+
+static inline void write_cr0(unsigned long x)
+{
+	native_write_cr0(x);
+}
+
+static inline unsigned long read_cr2(void)
+{
+	return native_read_cr2();
+}
+
+static inline void write_cr2(unsigned long x)
+{
+	native_write_cr2(x);
+}
+
+static inline unsigned long read_cr3(void)
+{
+	return native_read_cr3();
+}
+
+static inline void write_cr3(unsigned long x)
+{
+	native_write_cr3(x);
+}
+
+static inline unsigned long read_cr4(void)
+{
+	return native_read_cr4();
+}
+
+static inline unsigned long read_cr4_safe(void)
+{
+	return native_read_cr4_safe();
+}
+
+static inline void write_cr4(unsigned long x)
+{
+	native_write_cr4(x);
+}
+
+static inline void wbinvd(void)
+{
+	native_wbinvd();
+}
+
 #ifdef CONFIG_X86_64
-#define read_cr8()	(native_read_cr8())
-#define write_cr8(x)	(native_write_cr8(x))
-#define load_gs_index   native_load_gs_index
+
+static inline unsigned long read_cr8(void)
+{
+	return native_read_cr8();
+}
+
+static inline void write_cr8(unsigned long x)
+{
+	native_write_cr8(x);
+}
+
+static inline void load_gs_index(unsigned selector)
+{
+	native_load_gs_index(selector);
+}
+
 #endif
 
 /* Clear the 'TS' bit */
-#define clts()		(native_clts())
+static inline void clts(void)
+{
+	native_clts();
+}
 
 #endif/* CONFIG_PARAVIRT */
 
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 910a7084f7f..c00692476e9 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -93,19 +93,11 @@ extern void setup_node_to_cpumask_map(void);
 #define pcibus_to_node(bus) __pcibus_to_node(bus)
 
 #ifdef CONFIG_X86_32
-extern unsigned long node_start_pfn[];
-extern unsigned long node_end_pfn[];
-extern unsigned long node_remap_size[];
-#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
-
 # define SD_CACHE_NICE_TRIES	1
 # define SD_IDLE_IDX		1
-
 #else
-
 # define SD_CACHE_NICE_TRIES	2
 # define SD_IDLE_IDX		2
-
 #endif
 
 /* sched_domains SD_NODE_INIT for NUMA machines */
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index abd3e0ea762..99ddd148a76 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -6,7 +6,6 @@
 #include <linux/errno.h>
 #include <linux/compiler.h>
 #include <linux/thread_info.h>
-#include <linux/prefetch.h>
 #include <linux/string.h>
 #include <asm/asm.h>
 #include <asm/page.h>
@@ -42,7 +41,7 @@
  * Returns 0 if the range is valid, nonzero otherwise.
  *
  * This is equivalent to the following test:
- * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64)
+ * (u33)addr + (u33)size > (u33)current->addr_limit.seg (u65 for x86_64)
  *
  * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
  */
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 088d09fb161..566e803cc60 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -6,7 +6,6 @@
  */
 #include <linux/errno.h>
 #include <linux/thread_info.h>
-#include <linux/prefetch.h>
 #include <linux/string.h>
 #include <asm/asm.h>
 #include <asm/page.h>
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 316708d5af9..1c66d30971a 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -6,7 +6,6 @@
  */
 #include <linux/compiler.h>
 #include <linux/errno.h>
-#include <linux/prefetch.h>
 #include <linux/lockdep.h>
 #include <asm/alternative.h>
 #include <asm/cpufeature.h>
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index a755ef5e597..fb6a625c99b 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -350,10 +350,11 @@
 #define __NR_open_by_handle_at  342
 #define __NR_clock_adjtime	343
 #define __NR_syncfs             344
+#define __NR_sendmmsg		345
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 345
+#define NR_syscalls 346
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 160fa76bd57..79f90eb15aa 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -677,6 +677,8 @@ __SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at)
 __SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
 #define __NR_syncfs                             306
 __SYSCALL(__NR_syncfs, sys_syncfs)
+#define __NR_sendmmsg				307
+__SYSCALL(__NR_sendmmsg, sys_sendmmsg)
 
 #ifndef __NO_STUBS
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 3e094af443c..130f1eeee5f 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -94,6 +94,8 @@
 /* after this # consecutive successes, bump up the throttle if it was lowered */
 #define COMPLETE_THRESHOLD 5
 
+#define UV_LB_SUBNODEID 0x10
+
 /*
  * number of entries in the destination side payload queue
  */
@@ -124,7 +126,7 @@
  * The distribution specification (32 bytes) is interpreted as a 256-bit
  * distribution vector. Adjacent bits correspond to consecutive even numbered
  * nodeIDs. The result of adding the index of a given bit to the 15-bit
- * 'base_dest_nodeid' field of the header corresponds to the
+ * 'base_dest_nasid' field of the header corresponds to the
  * destination nodeID associated with that specified bit.
  */
 struct bau_target_uvhubmask {
@@ -176,7 +178,7 @@ struct bau_msg_payload {
 struct bau_msg_header {
 	unsigned int dest_subnodeid:6;	/* must be 0x10, for the LB */
 	/* bits 5:0 */
-	unsigned int base_dest_nodeid:15; /* nasid of the */
+	unsigned int base_dest_nasid:15; /* nasid of the */
 	/* bits 20:6 */			  /* first bit in uvhub map */
 	unsigned int command:8;	/* message type */
 	/* bits 28:21 */
@@ -378,6 +380,10 @@ struct ptc_stats {
 	unsigned long d_rcanceled; /* number of messages canceled by resets */
 };
 
+struct hub_and_pnode {
+	short uvhub;
+	short pnode;
+};
 /*
  * one per-cpu; to locate the software tables
  */
@@ -399,10 +405,12 @@ struct bau_control {
 	int baudisabled;
 	int set_bau_off;
 	short cpu;
+	short osnode;
 	short uvhub_cpu;
 	short uvhub;
 	short cpus_in_socket;
 	short cpus_in_uvhub;
+	short partition_base_pnode;
 	unsigned short message_number;
 	unsigned short uvhub_quiesce;
 	short socket_acknowledge_count[DEST_Q_SIZE];
@@ -422,15 +430,16 @@ struct bau_control {
 	int congested_period;
 	cycles_t period_time;
 	long period_requests;
+	struct hub_and_pnode *target_hub_and_pnode;
 };
 
 static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp)
 {
 	return constant_test_bit(uvhub, &dstp->bits[0]);
 }
-static inline void bau_uvhub_set(int uvhub, struct bau_target_uvhubmask *dstp)
+static inline void bau_uvhub_set(int pnode, struct bau_target_uvhubmask *dstp)
 {
-	__set_bit(uvhub, &dstp->bits[0]);
+	__set_bit(pnode, &dstp->bits[0]);
 }
 static inline void bau_uvhubs_clear(struct bau_target_uvhubmask *dstp,
 				    int nbits)
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a501741c233..4298002d0c8 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -398,6 +398,8 @@ struct uv_blade_info {
 	unsigned short	nr_online_cpus;
 	unsigned short	pnode;
 	short		memory_nid;
+	spinlock_t	nmi_lock;
+	unsigned long	nmi_count;
 };
 extern struct uv_blade_info *uv_blade_info;
 extern short *uv_node_to_blade;
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index 20cafeac745..f5bb64a823d 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -5,7 +5,7 @@
  *
  * SGI UV MMR definitions
  *
- * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2011 Silicon Graphics, Inc. All rights reserved.
  */
 
 #ifndef _ASM_X86_UV_UV_MMRS_H
@@ -1099,5 +1099,19 @@ union uvh_rtc1_int_config_u {
     } s;
 };
 
+/* ========================================================================= */
+/*                               UVH_SCRATCH5                                */
+/* ========================================================================= */
+#define UVH_SCRATCH5 0x2d0200UL
+#define UVH_SCRATCH5_32 0x00778
+
+#define UVH_SCRATCH5_SCRATCH5_SHFT 0
+#define UVH_SCRATCH5_SCRATCH5_MASK 0xffffffffffffffffUL
+union uvh_scratch5_u {
+    unsigned long	v;
+    struct uvh_scratch5_s {
+	unsigned long	scratch5 : 64;  /* RW, W1CS */
+    } s;
+};
 
 #endif /* __ASM_UV_MMRS_X86_H__ */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 643ebf2e2ad..d3d859035af 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -68,6 +68,17 @@ struct x86_init_oem {
 };
 
 /**
+ * struct x86_init_mapping - platform specific initial kernel pagetable setup
+ * @pagetable_reserve:	reserve a range of addresses for kernel pagetable usage
+ *
+ * For more details on the purpose of this hook, look in
+ * init_memory_mapping and the commit that added it.
+ */
+struct x86_init_mapping {
+	void (*pagetable_reserve)(u64 start, u64 end);
+};
+
+/**
  * struct x86_init_paging - platform specific paging functions
  * @pagetable_setup_start:	platform specific pre paging_init() call
  * @pagetable_setup_done:	platform specific post paging_init() call
@@ -123,6 +134,7 @@ struct x86_init_ops {
 	struct x86_init_mpparse		mpparse;
 	struct x86_init_irqs		irqs;
 	struct x86_init_oem		oem;
+	struct x86_init_mapping		mapping;
 	struct x86_init_paging		paging;
 	struct x86_init_timers		timers;
 	struct x86_init_iommu		iommu;
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index c61934fbf22..64a619d47d3 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -47,8 +47,9 @@ extern bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
 extern unsigned long set_phys_range_identity(unsigned long pfn_s,
 					     unsigned long pfn_e);
 
-extern int m2p_add_override(unsigned long mfn, struct page *page);
-extern int m2p_remove_override(struct page *page);
+extern int m2p_add_override(unsigned long mfn, struct page *page,
+			    bool clear_pte);
+extern int m2p_remove_override(struct page *page, bool clear_pte);
 extern struct page *m2p_find_override(unsigned long mfn);
 extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn);
 
diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h
index aa862098916..4fbda9a3f33 100644
--- a/arch/x86/include/asm/xen/pci.h
+++ b/arch/x86/include/asm/xen/pci.h
@@ -15,10 +15,26 @@ static inline int pci_xen_hvm_init(void)
 #endif
 #if defined(CONFIG_XEN_DOM0)
 void __init xen_setup_pirqs(void);
+int xen_find_device_domain_owner(struct pci_dev *dev);
+int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain);
+int xen_unregister_device_domain_owner(struct pci_dev *dev);
 #else
 static inline void __init xen_setup_pirqs(void)
 {
 }
+static inline int xen_find_device_domain_owner(struct pci_dev *dev)
+{
+	return -1;
+}
+static inline int xen_register_device_domain_owner(struct pci_dev *dev,
+						   uint16_t domain)
+{
+	return -1;
+}
+static inline int xen_unregister_device_domain_owner(struct pci_dev *dev)
+{
+	return -1;
+}
 #endif
 
 #if defined(CONFIG_PCI_MSI)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 7338ef2218b..250806472a7 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -36,7 +36,7 @@ obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time.o ioport.o ldt.o dumpstack.o
 obj-y			+= setup.o x86_init.o i8259.o irqinit.o jump_label.o
 obj-$(CONFIG_IRQ_WORK)  += irq_work.o
-obj-$(CONFIG_X86_32)	+= probe_roms_32.o
+obj-y			+= probe_roms.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
@@ -117,7 +117,7 @@ obj-$(CONFIG_OF)			+= devicetree.o
 ifeq ($(CONFIG_X86_64),y)
 	obj-$(CONFIG_AUDIT)		+= audit_64.o
 
-	obj-$(CONFIG_GART_IOMMU)	+= pci-gart_64.o aperture_64.o
+	obj-$(CONFIG_GART_IOMMU)	+= amd_gart_64.o aperture_64.o
 	obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
 	obj-$(CONFIG_AMD_IOMMU)		+= amd_iommu_init.o amd_iommu.o
 
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index ff93bc1b09c..18a857ba7a2 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -112,11 +112,6 @@ static int __init acpi_sleep_setup(char *str)
 #ifdef CONFIG_HIBERNATION
 		if (strncmp(str, "s4_nohwsig", 10) == 0)
 			acpi_no_s4_hw_signature();
-		if (strncmp(str, "s4_nonvs", 8) == 0) {
-			pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
-					"please use acpi_sleep=nonvs instead");
-			acpi_nvs_nosave();
-		}
 #endif
 		if (strncmp(str, "nonvs", 5) == 0)
 			acpi_nvs_nosave();
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 4a234677e21..a81f2d52f86 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -67,17 +67,30 @@ __setup("noreplace-paravirt", setup_noreplace_paravirt);
 #define DPRINTK(fmt, args...) if (debug_alternative) \
 	printk(KERN_DEBUG fmt, args)
 
+/*
+ * Each GENERIC_NOPX is of X bytes, and defined as an array of bytes
+ * that correspond to that nop. Getting from one nop to the next, we
+ * add to the array the offset that is equal to the sum of all sizes of
+ * nops preceding the one we are after.
+ *
+ * Note: The GENERIC_NOP5_ATOMIC is at the end, as it breaks the
+ * nice symmetry of sizes of the previous nops.
+ */
 #if defined(GENERIC_NOP1) && !defined(CONFIG_X86_64)
-/* Use inline assembly to define this because the nops are defined
-   as inline assembly strings in the include files and we cannot
-   get them easily into strings. */
-asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nintelnops: "
-	GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
-	GENERIC_NOP7 GENERIC_NOP8
-    "\t.previous");
-extern const unsigned char intelnops[];
-static const unsigned char *const __initconst_or_module
-intel_nops[ASM_NOP_MAX+1] = {
+static const unsigned char intelnops[] =
+{
+	GENERIC_NOP1,
+	GENERIC_NOP2,
+	GENERIC_NOP3,
+	GENERIC_NOP4,
+	GENERIC_NOP5,
+	GENERIC_NOP6,
+	GENERIC_NOP7,
+	GENERIC_NOP8,
+	GENERIC_NOP5_ATOMIC
+};
+static const unsigned char * const intel_nops[ASM_NOP_MAX+2] =
+{
 	NULL,
 	intelnops,
 	intelnops + 1,
@@ -87,17 +100,25 @@ intel_nops[ASM_NOP_MAX+1] = {
 	intelnops + 1 + 2 + 3 + 4 + 5,
 	intelnops + 1 + 2 + 3 + 4 + 5 + 6,
 	intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+	intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
 };
 #endif
 
 #ifdef K8_NOP1
-asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk8nops: "
-	K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
-	K8_NOP7 K8_NOP8
-    "\t.previous");
-extern const unsigned char k8nops[];
-static const unsigned char *const __initconst_or_module
-k8_nops[ASM_NOP_MAX+1] = {
+static const unsigned char k8nops[] =
+{
+	K8_NOP1,
+	K8_NOP2,
+	K8_NOP3,
+	K8_NOP4,
+	K8_NOP5,
+	K8_NOP6,
+	K8_NOP7,
+	K8_NOP8,
+	K8_NOP5_ATOMIC
+};
+static const unsigned char * const k8_nops[ASM_NOP_MAX+2] =
+{
 	NULL,
 	k8nops,
 	k8nops + 1,
@@ -107,17 +128,25 @@ k8_nops[ASM_NOP_MAX+1] = {
 	k8nops + 1 + 2 + 3 + 4 + 5,
 	k8nops + 1 + 2 + 3 + 4 + 5 + 6,
 	k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+	k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
 };
 #endif
 
 #if defined(K7_NOP1) && !defined(CONFIG_X86_64)
-asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk7nops: "
-	K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
-	K7_NOP7 K7_NOP8
-    "\t.previous");
-extern const unsigned char k7nops[];
-static const unsigned char *const __initconst_or_module
-k7_nops[ASM_NOP_MAX+1] = {
+static const unsigned char k7nops[] =
+{
+	K7_NOP1,
+	K7_NOP2,
+	K7_NOP3,
+	K7_NOP4,
+	K7_NOP5,
+	K7_NOP6,
+	K7_NOP7,
+	K7_NOP8,
+	K7_NOP5_ATOMIC
+};
+static const unsigned char * const k7_nops[ASM_NOP_MAX+2] =
+{
 	NULL,
 	k7nops,
 	k7nops + 1,
@@ -127,17 +156,25 @@ k7_nops[ASM_NOP_MAX+1] = {
 	k7nops + 1 + 2 + 3 + 4 + 5,
 	k7nops + 1 + 2 + 3 + 4 + 5 + 6,
 	k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+	k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
 };
 #endif
 
 #ifdef P6_NOP1
-asm("\t" __stringify(__INITRODATA_OR_MODULE) "\np6nops: "
-	P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
-	P6_NOP7 P6_NOP8
-    "\t.previous");
-extern const unsigned char p6nops[];
-static const unsigned char *const __initconst_or_module
-p6_nops[ASM_NOP_MAX+1] = {
+static const unsigned char  __initconst_or_module p6nops[] =
+{
+	P6_NOP1,
+	P6_NOP2,
+	P6_NOP3,
+	P6_NOP4,
+	P6_NOP5,
+	P6_NOP6,
+	P6_NOP7,
+	P6_NOP8,
+	P6_NOP5_ATOMIC
+};
+static const unsigned char * const p6_nops[ASM_NOP_MAX+2] =
+{
 	NULL,
 	p6nops,
 	p6nops + 1,
@@ -147,47 +184,65 @@ p6_nops[ASM_NOP_MAX+1] = {
 	p6nops + 1 + 2 + 3 + 4 + 5,
 	p6nops + 1 + 2 + 3 + 4 + 5 + 6,
 	p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+	p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8,
 };
 #endif
 
+/* Initialize these to a safe default */
 #ifdef CONFIG_X86_64
+const unsigned char * const *ideal_nops = p6_nops;
+#else
+const unsigned char * const *ideal_nops = intel_nops;
+#endif
 
-extern char __vsyscall_0;
-static const unsigned char *const *__init_or_module find_nop_table(void)
+void __init arch_init_ideal_nops(void)
 {
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
-	    boot_cpu_has(X86_FEATURE_NOPL))
-		return p6_nops;
-	else
-		return k8_nops;
-}
-
-#else /* CONFIG_X86_64 */
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		/*
+		 * Due to a decoder implementation quirk, some
+		 * specific Intel CPUs actually perform better with
+		 * the "k8_nops" than with the SDM-recommended NOPs.
+		 */
+		if (boot_cpu_data.x86 == 6 &&
+		    boot_cpu_data.x86_model >= 0x0f &&
+		    boot_cpu_data.x86_model != 0x1c &&
+		    boot_cpu_data.x86_model != 0x26 &&
+		    boot_cpu_data.x86_model != 0x27 &&
+		    boot_cpu_data.x86_model < 0x30) {
+			ideal_nops = k8_nops;
+		} else if (boot_cpu_has(X86_FEATURE_NOPL)) {
+			   ideal_nops = p6_nops;
+		} else {
+#ifdef CONFIG_X86_64
+			ideal_nops = k8_nops;
+#else
+			ideal_nops = intel_nops;
+#endif
+		}
 
-static const unsigned char *const *__init_or_module find_nop_table(void)
-{
-	if (boot_cpu_has(X86_FEATURE_K8))
-		return k8_nops;
-	else if (boot_cpu_has(X86_FEATURE_K7))
-		return k7_nops;
-	else if (boot_cpu_has(X86_FEATURE_NOPL))
-		return p6_nops;
-	else
-		return intel_nops;
+	default:
+#ifdef CONFIG_X86_64
+		ideal_nops = k8_nops;
+#else
+		if (boot_cpu_has(X86_FEATURE_K8))
+			ideal_nops = k8_nops;
+		else if (boot_cpu_has(X86_FEATURE_K7))
+			ideal_nops = k7_nops;
+		else
+			ideal_nops = intel_nops;
+#endif
+	}
 }
 
-#endif /* CONFIG_X86_64 */
-
 /* Use this to add nops to a buffer, then text_poke the whole buffer. */
 static void __init_or_module add_nops(void *insns, unsigned int len)
 {
-	const unsigned char *const *noptable = find_nop_table();
-
 	while (len > 0) {
 		unsigned int noplen = len;
 		if (noplen > ASM_NOP_MAX)
 			noplen = ASM_NOP_MAX;
-		memcpy(insns, noptable[noplen], noplen);
+		memcpy(insns, ideal_nops[noplen], noplen);
 		insns += noplen;
 		len -= noplen;
 	}
@@ -195,6 +250,7 @@ static void __init_or_module add_nops(void *insns, unsigned int len)
 
 extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
 extern s32 __smp_locks[], __smp_locks_end[];
+extern char __vsyscall_0;
 void *text_poke_early(void *addr, const void *opcode, size_t len);
 
 /* Replace instructions with better alternatives for this CPU type.
@@ -210,6 +266,15 @@ void __init_or_module apply_alternatives(struct alt_instr *start,
 	u8 insnbuf[MAX_PATCH_LEN];
 
 	DPRINTK("%s: alt table %p -> %p\n", __func__, start, end);
+	/*
+	 * The scan order should be from start to end. A later scanned
+	 * alternative code can overwrite a previous scanned alternative code.
+	 * Some kernel functions (e.g. memcpy, memset, etc) use this order to
+	 * patch code.
+	 *
+	 * So be careful if you want to change the scan order to any other
+	 * order.
+	 */
 	for (a = start; a < end; a++) {
 		u8 *instr = a->instr;
 		BUG_ON(a->replacementlen > a->instrlen);
@@ -678,29 +743,3 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n)
 	wrote_text = 0;
 	__stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
 }
-
-#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
-
-#ifdef CONFIG_X86_64
-unsigned char ideal_nop5[5] = { 0x66, 0x66, 0x66, 0x66, 0x90 };
-#else
-unsigned char ideal_nop5[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
-#endif
-
-void __init arch_init_ideal_nop5(void)
-{
-	/*
-	 * There is no good nop for all x86 archs.  This selection
-	 * algorithm should be unified with the one in find_nop_table(),
-	 * but this should be good enough for now.
-	 *
-	 * For cases other than the ones below, use the safe (as in
-	 * always functional) defaults above.
-	 */
-#ifdef CONFIG_X86_64
-	/* Don't use these on 32 bits due to broken virtualizers */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-		memcpy(ideal_nop5, p6_nops[5], 5);
-#endif
-}
-#endif
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/amd_gart_64.c
index 82ada01625b..b117efd24f7 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/amd_gart_64.c
@@ -81,6 +81,9 @@ static u32 gart_unmapped_entry;
 #define AGPEXTERN
 #endif
 
+/* GART can only remap to physical addresses < 1TB */
+#define GART_MAX_PHYS_ADDR	(1ULL << 40)
+
 /* backdoor interface to AGP driver */
 AGPEXTERN int agp_memory_reserved;
 AGPEXTERN __u32 *agp_gatt_table;
@@ -212,9 +215,13 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 				size_t size, int dir, unsigned long align_mask)
 {
 	unsigned long npages = iommu_num_pages(phys_mem, size, PAGE_SIZE);
-	unsigned long iommu_page = alloc_iommu(dev, npages, align_mask);
+	unsigned long iommu_page;
 	int i;
 
+	if (unlikely(phys_mem + size > GART_MAX_PHYS_ADDR))
+		return bad_dma_addr;
+
+	iommu_page = alloc_iommu(dev, npages, align_mask);
 	if (iommu_page == -1) {
 		if (!nonforced_iommu(dev, phys_mem, size))
 			return phys_mem;
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 57ca7778722..873e7e1ead7 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/pci-ats.h>
 #include <linux/bitmap.h>
 #include <linux/slab.h>
 #include <linux/debugfs.h>
@@ -25,6 +26,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/iommu-helper.h>
 #include <linux/iommu.h>
+#include <linux/delay.h>
 #include <asm/proto.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
@@ -34,7 +36,7 @@
 
 #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
 
-#define EXIT_LOOP_COUNT 10000000
+#define LOOP_TIMEOUT	100000
 
 static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 
@@ -57,7 +59,6 @@ struct iommu_cmd {
 	u32 data[4];
 };
 
-static void reset_iommu_command_buffer(struct amd_iommu *iommu);
 static void update_domain(struct protection_domain *domain);
 
 /****************************************************************************
@@ -322,8 +323,6 @@ static void iommu_print_event(struct amd_iommu *iommu, void *__evt)
 		break;
 	case EVENT_TYPE_ILL_CMD:
 		printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
-		iommu->reset_in_progress = true;
-		reset_iommu_command_buffer(iommu);
 		dump_command(address);
 		break;
 	case EVENT_TYPE_CMD_HARD_ERR:
@@ -367,7 +366,7 @@ static void iommu_poll_events(struct amd_iommu *iommu)
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-irqreturn_t amd_iommu_int_handler(int irq, void *data)
+irqreturn_t amd_iommu_int_thread(int irq, void *data)
 {
 	struct amd_iommu *iommu;
 
@@ -377,192 +376,300 @@ irqreturn_t amd_iommu_int_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+irqreturn_t amd_iommu_int_handler(int irq, void *data)
+{
+	return IRQ_WAKE_THREAD;
+}
+
 /****************************************************************************
  *
  * IOMMU command queuing functions
  *
  ****************************************************************************/
 
-/*
- * Writes the command to the IOMMUs command buffer and informs the
- * hardware about the new command. Must be called with iommu->lock held.
- */
-static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
+static int wait_on_sem(volatile u64 *sem)
+{
+	int i = 0;
+
+	while (*sem == 0 && i < LOOP_TIMEOUT) {
+		udelay(1);
+		i += 1;
+	}
+
+	if (i == LOOP_TIMEOUT) {
+		pr_alert("AMD-Vi: Completion-Wait loop timed out\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void copy_cmd_to_buffer(struct amd_iommu *iommu,
+			       struct iommu_cmd *cmd,
+			       u32 tail)
 {
-	u32 tail, head;
 	u8 *target;
 
-	WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED);
-	tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
 	target = iommu->cmd_buf + tail;
-	memcpy_toio(target, cmd, sizeof(*cmd));
-	tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
-	head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
-	if (tail == head)
-		return -ENOMEM;
+	tail   = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
+
+	/* Copy command to buffer */
+	memcpy(target, cmd, sizeof(*cmd));
+
+	/* Tell the IOMMU about it */
 	writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+}
 
-	return 0;
+static void build_completion_wait(struct iommu_cmd *cmd, u64 address)
+{
+	WARN_ON(address & 0x7ULL);
+
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->data[0] = lower_32_bits(__pa(address)) | CMD_COMPL_WAIT_STORE_MASK;
+	cmd->data[1] = upper_32_bits(__pa(address));
+	cmd->data[2] = 1;
+	CMD_SET_TYPE(cmd, CMD_COMPL_WAIT);
+}
+
+static void build_inv_dte(struct iommu_cmd *cmd, u16 devid)
+{
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->data[0] = devid;
+	CMD_SET_TYPE(cmd, CMD_INV_DEV_ENTRY);
+}
+
+static void build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address,
+				  size_t size, u16 domid, int pde)
+{
+	u64 pages;
+	int s;
+
+	pages = iommu_num_pages(address, size, PAGE_SIZE);
+	s     = 0;
+
+	if (pages > 1) {
+		/*
+		 * If we have to flush more than one page, flush all
+		 * TLB entries for this domain
+		 */
+		address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
+		s = 1;
+	}
+
+	address &= PAGE_MASK;
+
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->data[1] |= domid;
+	cmd->data[2]  = lower_32_bits(address);
+	cmd->data[3]  = upper_32_bits(address);
+	CMD_SET_TYPE(cmd, CMD_INV_IOMMU_PAGES);
+	if (s) /* size bit - we flush more than one 4kb page */
+		cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
+	if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
+		cmd->data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
+}
+
+static void build_inv_iotlb_pages(struct iommu_cmd *cmd, u16 devid, int qdep,
+				  u64 address, size_t size)
+{
+	u64 pages;
+	int s;
+
+	pages = iommu_num_pages(address, size, PAGE_SIZE);
+	s     = 0;
+
+	if (pages > 1) {
+		/*
+		 * If we have to flush more than one page, flush all
+		 * TLB entries for this domain
+		 */
+		address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
+		s = 1;
+	}
+
+	address &= PAGE_MASK;
+
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->data[0]  = devid;
+	cmd->data[0] |= (qdep & 0xff) << 24;
+	cmd->data[1]  = devid;
+	cmd->data[2]  = lower_32_bits(address);
+	cmd->data[3]  = upper_32_bits(address);
+	CMD_SET_TYPE(cmd, CMD_INV_IOTLB_PAGES);
+	if (s)
+		cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
+}
+
+static void build_inv_all(struct iommu_cmd *cmd)
+{
+	memset(cmd, 0, sizeof(*cmd));
+	CMD_SET_TYPE(cmd, CMD_INV_ALL);
 }
 
 /*
- * General queuing function for commands. Takes iommu->lock and calls
- * __iommu_queue_command().
+ * Writes the command to the IOMMUs command buffer and informs the
+ * hardware about the new command.
  */
 static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 {
+	u32 left, tail, head, next_tail;
 	unsigned long flags;
-	int ret;
 
+	WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED);
+
+again:
 	spin_lock_irqsave(&iommu->lock, flags);
-	ret = __iommu_queue_command(iommu, cmd);
-	if (!ret)
-		iommu->need_sync = true;
-	spin_unlock_irqrestore(&iommu->lock, flags);
 
-	return ret;
-}
+	head      = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+	tail      = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+	next_tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
+	left      = (head - next_tail) % iommu->cmd_buf_size;
 
-/*
- * This function waits until an IOMMU has completed a completion
- * wait command
- */
-static void __iommu_wait_for_completion(struct amd_iommu *iommu)
-{
-	int ready = 0;
-	unsigned status = 0;
-	unsigned long i = 0;
+	if (left <= 2) {
+		struct iommu_cmd sync_cmd;
+		volatile u64 sem = 0;
+		int ret;
 
-	INC_STATS_COUNTER(compl_wait);
+		build_completion_wait(&sync_cmd, (u64)&sem);
+		copy_cmd_to_buffer(iommu, &sync_cmd, tail);
 
-	while (!ready && (i < EXIT_LOOP_COUNT)) {
-		++i;
-		/* wait for the bit to become one */
-		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
-		ready = status & MMIO_STATUS_COM_WAIT_INT_MASK;
+		spin_unlock_irqrestore(&iommu->lock, flags);
+
+		if ((ret = wait_on_sem(&sem)) != 0)
+			return ret;
+
+		goto again;
 	}
 
-	/* set bit back to zero */
-	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
-	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
+	copy_cmd_to_buffer(iommu, cmd, tail);
+
+	/* We need to sync now to make sure all commands are processed */
+	iommu->need_sync = true;
+
+	spin_unlock_irqrestore(&iommu->lock, flags);
 
-	if (unlikely(i == EXIT_LOOP_COUNT))
-		iommu->reset_in_progress = true;
+	return 0;
 }
 
 /*
  * This function queues a completion wait command into the command
  * buffer of an IOMMU
  */
-static int __iommu_completion_wait(struct amd_iommu *iommu)
+static int iommu_completion_wait(struct amd_iommu *iommu)
 {
 	struct iommu_cmd cmd;
+	volatile u64 sem = 0;
+	int ret;
 
-	 memset(&cmd, 0, sizeof(cmd));
-	 cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
-	 CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
+	if (!iommu->need_sync)
+		return 0;
 
-	 return __iommu_queue_command(iommu, &cmd);
+	build_completion_wait(&cmd, (u64)&sem);
+
+	ret = iommu_queue_command(iommu, &cmd);
+	if (ret)
+		return ret;
+
+	return wait_on_sem(&sem);
 }
 
-/*
- * This function is called whenever we need to ensure that the IOMMU has
- * completed execution of all commands we sent. It sends a
- * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs
- * us about that by writing a value to a physical address we pass with
- * the command.
- */
-static int iommu_completion_wait(struct amd_iommu *iommu)
+static int iommu_flush_dte(struct amd_iommu *iommu, u16 devid)
 {
-	int ret = 0;
-	unsigned long flags;
+	struct iommu_cmd cmd;
 
-	spin_lock_irqsave(&iommu->lock, flags);
+	build_inv_dte(&cmd, devid);
 
-	if (!iommu->need_sync)
-		goto out;
+	return iommu_queue_command(iommu, &cmd);
+}
 
-	ret = __iommu_completion_wait(iommu);
+static void iommu_flush_dte_all(struct amd_iommu *iommu)
+{
+	u32 devid;
 
-	iommu->need_sync = false;
+	for (devid = 0; devid <= 0xffff; ++devid)
+		iommu_flush_dte(iommu, devid);
 
-	if (ret)
-		goto out;
-
-	__iommu_wait_for_completion(iommu);
+	iommu_completion_wait(iommu);
+}
 
-out:
-	spin_unlock_irqrestore(&iommu->lock, flags);
+/*
+ * This function uses heavy locking and may disable irqs for some time. But
+ * this is no issue because it is only called during resume.
+ */
+static void iommu_flush_tlb_all(struct amd_iommu *iommu)
+{
+	u32 dom_id;
 
-	if (iommu->reset_in_progress)
-		reset_iommu_command_buffer(iommu);
+	for (dom_id = 0; dom_id <= 0xffff; ++dom_id) {
+		struct iommu_cmd cmd;
+		build_inv_iommu_pages(&cmd, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
+				      dom_id, 1);
+		iommu_queue_command(iommu, &cmd);
+	}
 
-	return 0;
+	iommu_completion_wait(iommu);
 }
 
-static void iommu_flush_complete(struct protection_domain *domain)
+static void iommu_flush_all(struct amd_iommu *iommu)
 {
-	int i;
+	struct iommu_cmd cmd;
 
-	for (i = 0; i < amd_iommus_present; ++i) {
-		if (!domain->dev_iommu[i])
-			continue;
+	build_inv_all(&cmd);
 
-		/*
-		 * Devices of this domain are behind this IOMMU
-		 * We need to wait for completion of all commands.
-		 */
-		iommu_completion_wait(amd_iommus[i]);
+	iommu_queue_command(iommu, &cmd);
+	iommu_completion_wait(iommu);
+}
+
+void iommu_flush_all_caches(struct amd_iommu *iommu)
+{
+	if (iommu_feature(iommu, FEATURE_IA)) {
+		iommu_flush_all(iommu);
+	} else {
+		iommu_flush_dte_all(iommu);
+		iommu_flush_tlb_all(iommu);
 	}
 }
 
 /*
- * Command send function for invalidating a device table entry
+ * Command send function for flushing on-device TLB
  */
-static int iommu_flush_device(struct device *dev)
+static int device_flush_iotlb(struct device *dev, u64 address, size_t size)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct amd_iommu *iommu;
 	struct iommu_cmd cmd;
 	u16 devid;
+	int qdep;
 
+	qdep  = pci_ats_queue_depth(pdev);
 	devid = get_device_id(dev);
 	iommu = amd_iommu_rlookup_table[devid];
 
-	/* Build command */
-	memset(&cmd, 0, sizeof(cmd));
-	CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
-	cmd.data[0] = devid;
+	build_inv_iotlb_pages(&cmd, devid, qdep, address, size);
 
 	return iommu_queue_command(iommu, &cmd);
 }
 
-static void __iommu_build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address,
-					  u16 domid, int pde, int s)
-{
-	memset(cmd, 0, sizeof(*cmd));
-	address &= PAGE_MASK;
-	CMD_SET_TYPE(cmd, CMD_INV_IOMMU_PAGES);
-	cmd->data[1] |= domid;
-	cmd->data[2] = lower_32_bits(address);
-	cmd->data[3] = upper_32_bits(address);
-	if (s) /* size bit - we flush more than one 4kb page */
-		cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
-	if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
-		cmd->data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
-}
-
 /*
- * Generic command send function for invalidaing TLB entries
+ * Command send function for invalidating a device table entry
  */
-static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
-		u64 address, u16 domid, int pde, int s)
+static int device_flush_dte(struct device *dev)
 {
-	struct iommu_cmd cmd;
+	struct amd_iommu *iommu;
+	struct pci_dev *pdev;
+	u16 devid;
 	int ret;
 
-	__iommu_build_inv_iommu_pages(&cmd, address, domid, pde, s);
+	pdev  = to_pci_dev(dev);
+	devid = get_device_id(dev);
+	iommu = amd_iommu_rlookup_table[devid];
 
-	ret = iommu_queue_command(iommu, &cmd);
+	ret = iommu_flush_dte(iommu, devid);
+	if (ret)
+		return ret;
+
+	if (pci_ats_enabled(pdev))
+		ret = device_flush_iotlb(dev, 0, ~0UL);
 
 	return ret;
 }
@@ -572,23 +679,14 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
  * It invalidates a single PTE if the range to flush is within a single
  * page. Otherwise it flushes the whole TLB of the IOMMU.
  */
-static void __iommu_flush_pages(struct protection_domain *domain,
-				u64 address, size_t size, int pde)
+static void __domain_flush_pages(struct protection_domain *domain,
+				 u64 address, size_t size, int pde)
 {
-	int s = 0, i;
-	unsigned long pages = iommu_num_pages(address, size, PAGE_SIZE);
-
-	address &= PAGE_MASK;
-
-	if (pages > 1) {
-		/*
-		 * If we have to flush more than one page, flush all
-		 * TLB entries for this domain
-		 */
-		address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
-		s = 1;
-	}
+	struct iommu_dev_data *dev_data;
+	struct iommu_cmd cmd;
+	int ret = 0, i;
 
+	build_inv_iommu_pages(&cmd, address, size, domain->id, pde);
 
 	for (i = 0; i < amd_iommus_present; ++i) {
 		if (!domain->dev_iommu[i])
@@ -598,101 +696,70 @@ static void __iommu_flush_pages(struct protection_domain *domain,
 		 * Devices of this domain are behind this IOMMU
 		 * We need a TLB flush
 		 */
-		iommu_queue_inv_iommu_pages(amd_iommus[i], address,
-					    domain->id, pde, s);
+		ret |= iommu_queue_command(amd_iommus[i], &cmd);
+	}
+
+	list_for_each_entry(dev_data, &domain->dev_list, list) {
+		struct pci_dev *pdev = to_pci_dev(dev_data->dev);
+
+		if (!pci_ats_enabled(pdev))
+			continue;
+
+		ret |= device_flush_iotlb(dev_data->dev, address, size);
 	}
 
-	return;
+	WARN_ON(ret);
 }
 
-static void iommu_flush_pages(struct protection_domain *domain,
-			     u64 address, size_t size)
+static void domain_flush_pages(struct protection_domain *domain,
+			       u64 address, size_t size)
 {
-	__iommu_flush_pages(domain, address, size, 0);
+	__domain_flush_pages(domain, address, size, 0);
 }
 
 /* Flush the whole IO/TLB for a given protection domain */
-static void iommu_flush_tlb(struct protection_domain *domain)
+static void domain_flush_tlb(struct protection_domain *domain)
 {
-	__iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0);
+	__domain_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0);
 }
 
 /* Flush the whole IO/TLB for a given protection domain - including PDE */
-static void iommu_flush_tlb_pde(struct protection_domain *domain)
+static void domain_flush_tlb_pde(struct protection_domain *domain)
 {
-	__iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1);
-}
-
-
-/*
- * This function flushes the DTEs for all devices in domain
- */
-static void iommu_flush_domain_devices(struct protection_domain *domain)
-{
-	struct iommu_dev_data *dev_data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&domain->lock, flags);
-
-	list_for_each_entry(dev_data, &domain->dev_list, list)
-		iommu_flush_device(dev_data->dev);
-
-	spin_unlock_irqrestore(&domain->lock, flags);
+	__domain_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1);
 }
 
-static void iommu_flush_all_domain_devices(void)
+static void domain_flush_complete(struct protection_domain *domain)
 {
-	struct protection_domain *domain;
-	unsigned long flags;
+	int i;
 
-	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
+	for (i = 0; i < amd_iommus_present; ++i) {
+		if (!domain->dev_iommu[i])
+			continue;
 
-	list_for_each_entry(domain, &amd_iommu_pd_list, list) {
-		iommu_flush_domain_devices(domain);
-		iommu_flush_complete(domain);
+		/*
+		 * Devices of this domain are behind this IOMMU
+		 * We need to wait for completion of all commands.
+		 */
+		iommu_completion_wait(amd_iommus[i]);
 	}
-
-	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
 }
 
-void amd_iommu_flush_all_devices(void)
-{
-	iommu_flush_all_domain_devices();
-}
 
 /*
- * This function uses heavy locking and may disable irqs for some time. But
- * this is no issue because it is only called during resume.
+ * This function flushes the DTEs for all devices in domain
  */
-void amd_iommu_flush_all_domains(void)
+static void domain_flush_devices(struct protection_domain *domain)
 {
-	struct protection_domain *domain;
+	struct iommu_dev_data *dev_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
-
-	list_for_each_entry(domain, &amd_iommu_pd_list, list) {
-		spin_lock(&domain->lock);
-		iommu_flush_tlb_pde(domain);
-		iommu_flush_complete(domain);
-		spin_unlock(&domain->lock);
-	}
-
-	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
-}
-
-static void reset_iommu_command_buffer(struct amd_iommu *iommu)
-{
-	pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
-
-	if (iommu->reset_in_progress)
-		panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
+	spin_lock_irqsave(&domain->lock, flags);
 
-	amd_iommu_reset_cmd_buffer(iommu);
-	amd_iommu_flush_all_devices();
-	amd_iommu_flush_all_domains();
+	list_for_each_entry(dev_data, &domain->dev_list, list)
+		device_flush_dte(dev_data->dev);
 
-	iommu->reset_in_progress = false;
+	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
 /****************************************************************************
@@ -1410,17 +1477,22 @@ static bool dma_ops_domain(struct protection_domain *domain)
 	return domain->flags & PD_DMA_OPS_MASK;
 }
 
-static void set_dte_entry(u16 devid, struct protection_domain *domain)
+static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
 {
 	u64 pte_root = virt_to_phys(domain->pt_root);
+	u32 flags = 0;
 
 	pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
 		    << DEV_ENTRY_MODE_SHIFT;
 	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
 
-	amd_iommu_dev_table[devid].data[2] = domain->id;
-	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
-	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
+	if (ats)
+		flags |= DTE_FLAG_IOTLB;
+
+	amd_iommu_dev_table[devid].data[3] |= flags;
+	amd_iommu_dev_table[devid].data[2]  = domain->id;
+	amd_iommu_dev_table[devid].data[1]  = upper_32_bits(pte_root);
+	amd_iommu_dev_table[devid].data[0]  = lower_32_bits(pte_root);
 }
 
 static void clear_dte_entry(u16 devid)
@@ -1437,34 +1509,42 @@ static void do_attach(struct device *dev, struct protection_domain *domain)
 {
 	struct iommu_dev_data *dev_data;
 	struct amd_iommu *iommu;
+	struct pci_dev *pdev;
+	bool ats = false;
 	u16 devid;
 
 	devid    = get_device_id(dev);
 	iommu    = amd_iommu_rlookup_table[devid];
 	dev_data = get_dev_data(dev);
+	pdev     = to_pci_dev(dev);
+
+	if (amd_iommu_iotlb_sup)
+		ats = pci_ats_enabled(pdev);
 
 	/* Update data structures */
 	dev_data->domain = domain;
 	list_add(&dev_data->list, &domain->dev_list);
-	set_dte_entry(devid, domain);
+	set_dte_entry(devid, domain, ats);
 
 	/* Do reference counting */
 	domain->dev_iommu[iommu->index] += 1;
 	domain->dev_cnt                 += 1;
 
 	/* Flush the DTE entry */
-	iommu_flush_device(dev);
+	device_flush_dte(dev);
 }
 
 static void do_detach(struct device *dev)
 {
 	struct iommu_dev_data *dev_data;
 	struct amd_iommu *iommu;
+	struct pci_dev *pdev;
 	u16 devid;
 
 	devid    = get_device_id(dev);
 	iommu    = amd_iommu_rlookup_table[devid];
 	dev_data = get_dev_data(dev);
+	pdev     = to_pci_dev(dev);
 
 	/* decrease reference counters */
 	dev_data->domain->dev_iommu[iommu->index] -= 1;
@@ -1476,7 +1556,7 @@ static void do_detach(struct device *dev)
 	clear_dte_entry(devid);
 
 	/* Flush the DTE entry */
-	iommu_flush_device(dev);
+	device_flush_dte(dev);
 }
 
 /*
@@ -1539,9 +1619,13 @@ out_unlock:
 static int attach_device(struct device *dev,
 			 struct protection_domain *domain)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	unsigned long flags;
 	int ret;
 
+	if (amd_iommu_iotlb_sup)
+		pci_enable_ats(pdev, PAGE_SHIFT);
+
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
 	ret = __attach_device(dev, domain);
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
@@ -1551,7 +1635,7 @@ static int attach_device(struct device *dev,
 	 * left the caches in the IOMMU dirty. So we have to flush
 	 * here to evict all dirty stuff.
 	 */
-	iommu_flush_tlb_pde(domain);
+	domain_flush_tlb_pde(domain);
 
 	return ret;
 }
@@ -1598,12 +1682,16 @@ static void __detach_device(struct device *dev)
  */
 static void detach_device(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	unsigned long flags;
 
 	/* lock device table */
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
 	__detach_device(dev);
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	if (amd_iommu_iotlb_sup && pci_ats_enabled(pdev))
+		pci_disable_ats(pdev);
 }
 
 /*
@@ -1692,7 +1780,7 @@ static int device_change_notifier(struct notifier_block *nb,
 		goto out;
 	}
 
-	iommu_flush_device(dev);
+	device_flush_dte(dev);
 	iommu_completion_wait(iommu);
 
 out:
@@ -1753,8 +1841,9 @@ static void update_device_table(struct protection_domain *domain)
 	struct iommu_dev_data *dev_data;
 
 	list_for_each_entry(dev_data, &domain->dev_list, list) {
+		struct pci_dev *pdev = to_pci_dev(dev_data->dev);
 		u16 devid = get_device_id(dev_data->dev);
-		set_dte_entry(devid, domain);
+		set_dte_entry(devid, domain, pci_ats_enabled(pdev));
 	}
 }
 
@@ -1764,8 +1853,9 @@ static void update_domain(struct protection_domain *domain)
 		return;
 
 	update_device_table(domain);
-	iommu_flush_domain_devices(domain);
-	iommu_flush_tlb_pde(domain);
+
+	domain_flush_devices(domain);
+	domain_flush_tlb_pde(domain);
 
 	domain->updated = false;
 }
@@ -1924,10 +2014,10 @@ retry:
 	ADD_STATS_COUNTER(alloced_io_mem, size);
 
 	if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) {
-		iommu_flush_tlb(&dma_dom->domain);
+		domain_flush_tlb(&dma_dom->domain);
 		dma_dom->need_flush = false;
 	} else if (unlikely(amd_iommu_np_cache))
-		iommu_flush_pages(&dma_dom->domain, address, size);
+		domain_flush_pages(&dma_dom->domain, address, size);
 
 out:
 	return address;
@@ -1976,7 +2066,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom,
 	dma_ops_free_addresses(dma_dom, dma_addr, pages);
 
 	if (amd_iommu_unmap_flush || dma_dom->need_flush) {
-		iommu_flush_pages(&dma_dom->domain, flush_addr, size);
+		domain_flush_pages(&dma_dom->domain, flush_addr, size);
 		dma_dom->need_flush = false;
 	}
 }
@@ -2012,7 +2102,7 @@ static dma_addr_t map_page(struct device *dev, struct page *page,
 	if (addr == DMA_ERROR_CODE)
 		goto out;
 
-	iommu_flush_complete(domain);
+	domain_flush_complete(domain);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -2039,7 +2129,7 @@ static void unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 
 	__unmap_single(domain->priv, dma_addr, size, dir);
 
-	iommu_flush_complete(domain);
+	domain_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -2104,7 +2194,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 			goto unmap;
 	}
 
-	iommu_flush_complete(domain);
+	domain_flush_complete(domain);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -2150,7 +2240,7 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 		s->dma_address = s->dma_length = 0;
 	}
 
-	iommu_flush_complete(domain);
+	domain_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -2200,7 +2290,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
 		goto out_free;
 	}
 
-	iommu_flush_complete(domain);
+	domain_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 
@@ -2232,7 +2322,7 @@ static void free_coherent(struct device *dev, size_t size,
 
 	__unmap_single(domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
 
-	iommu_flush_complete(domain);
+	domain_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 
@@ -2476,7 +2566,7 @@ static void amd_iommu_detach_device(struct iommu_domain *dom,
 	if (!iommu)
 		return;
 
-	iommu_flush_device(dev);
+	device_flush_dte(dev);
 	iommu_completion_wait(iommu);
 }
 
@@ -2542,7 +2632,7 @@ static int amd_iommu_unmap(struct iommu_domain *dom, unsigned long iova,
 	unmap_size = iommu_unmap_page(domain, iova, page_size);
 	mutex_unlock(&domain->api_lock);
 
-	iommu_flush_tlb_pde(domain);
+	domain_flush_tlb_pde(domain);
 
 	return get_order(unmap_size);
 }
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 246d727b65b..9179c21120a 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -137,6 +137,7 @@ int amd_iommus_present;
 
 /* IOMMUs have a non-present cache? */
 bool amd_iommu_np_cache __read_mostly;
+bool amd_iommu_iotlb_sup __read_mostly = true;
 
 /*
  * The ACPI table parsing functions set this variable on an error
@@ -180,6 +181,12 @@ static u32 dev_table_size;	/* size of the device table */
 static u32 alias_table_size;	/* size of the alias table */
 static u32 rlookup_table_size;	/* size if the rlookup table */
 
+/*
+ * This function flushes all internal caches of
+ * the IOMMU used by this driver.
+ */
+extern void iommu_flush_all_caches(struct amd_iommu *iommu);
+
 static inline void update_last_devid(u16 devid)
 {
 	if (devid > amd_iommu_last_bdf)
@@ -293,9 +300,23 @@ static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 /* Function to enable the hardware */
 static void iommu_enable(struct amd_iommu *iommu)
 {
-	printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n",
+	static const char * const feat_str[] = {
+		"PreF", "PPR", "X2APIC", "NX", "GT", "[5]",
+		"IA", "GA", "HE", "PC", NULL
+	};
+	int i;
+
+	printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx",
 	       dev_name(&iommu->dev->dev), iommu->cap_ptr);
 
+	if (iommu->cap & (1 << IOMMU_CAP_EFR)) {
+		printk(KERN_CONT " extended features: ");
+		for (i = 0; feat_str[i]; ++i)
+			if (iommu_feature(iommu, (1ULL << i)))
+				printk(KERN_CONT " %s", feat_str[i]);
+	}
+	printk(KERN_CONT "\n");
+
 	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
 }
 
@@ -651,7 +672,7 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
 static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 {
 	int cap_ptr = iommu->cap_ptr;
-	u32 range, misc;
+	u32 range, misc, low, high;
 	int i, j;
 
 	pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
@@ -667,6 +688,15 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 					MMIO_GET_LD(range));
 	iommu->evt_msi_num = MMIO_MSI_NUM(misc);
 
+	if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB)))
+		amd_iommu_iotlb_sup = false;
+
+	/* read extended feature bits */
+	low  = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
+	high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
+
+	iommu->features = ((u64)high << 32) | low;
+
 	if (!is_rd890_iommu(iommu->dev))
 		return;
 
@@ -1004,10 +1034,11 @@ static int iommu_setup_msi(struct amd_iommu *iommu)
 	if (pci_enable_msi(iommu->dev))
 		return 1;
 
-	r = request_irq(iommu->dev->irq, amd_iommu_int_handler,
-			IRQF_SAMPLE_RANDOM,
-			"AMD-Vi",
-			NULL);
+	r = request_threaded_irq(iommu->dev->irq,
+				 amd_iommu_int_handler,
+				 amd_iommu_int_thread,
+				 0, "AMD-Vi",
+				 iommu->dev);
 
 	if (r) {
 		pci_disable_msi(iommu->dev);
@@ -1244,6 +1275,7 @@ static void enable_iommus(void)
 		iommu_set_exclusion_range(iommu);
 		iommu_init_msi(iommu);
 		iommu_enable(iommu);
+		iommu_flush_all_caches(iommu);
 	}
 }
 
@@ -1274,8 +1306,8 @@ static void amd_iommu_resume(void)
 	 * we have to flush after the IOMMUs are enabled because a
 	 * disabled IOMMU will never execute the commands we send
 	 */
-	amd_iommu_flush_all_devices();
-	amd_iommu_flush_all_domains();
+	for_each_iommu(iommu)
+		iommu_flush_all_caches(iommu);
 }
 
 static int amd_iommu_suspend(void)
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 6801959a8b2..4c39baa8fac 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -21,7 +21,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 EXPORT_SYMBOL(amd_nb_misc_ids);
 
 static struct pci_device_id amd_nb_link_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_LINK) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
 	{}
 };
 
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 1293c709ee8..289e92862fd 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -177,7 +177,6 @@ static struct clocksource clocksource_apbt = {
 	.rating		= APBT_CLOCKSOURCE_RATING,
 	.read		= apbt_read_clocksource,
 	.mask		= APBT_MASK,
-	.shift		= APBT_SHIFT,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 	.resume		= apbt_restart_clocksource,
 };
@@ -316,7 +315,7 @@ static void apbt_setup_irq(struct apbt_dev *adev)
 	irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
 	irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
 	/* APB timer irqs are set up as mp_irqs, timer is edge type */
-	__set_irq_handler(adev->irq, handle_edge_irq, 0, "edge");
+	__irq_set_handler(adev->irq, handle_edge_irq, 0, "edge");
 
 	if (system_state == SYSTEM_BOOTING) {
 		if (request_irq(adev->irq, apbt_interrupt_handler,
@@ -543,14 +542,7 @@ static int apbt_clocksource_register(void)
 	if (t1 == apbt_read_clocksource(&clocksource_apbt))
 		panic("APBT counter not counting. APBT disabled\n");
 
-	/*
-	 * initialize and register APBT clocksource
-	 * convert that to ns/clock cycle
-	 * mult = (ns/c) * 2^APBT_SHIFT
-	 */
-	clocksource_apbt.mult = div_sc(MSEC_PER_SEC,
-				       (unsigned long) apbt_freq, APBT_SHIFT);
-	clocksource_register(&clocksource_apbt);
+	clocksource_register_khz(&clocksource_apbt, (u32)apbt_freq*1000);
 
 	return 0;
 }
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 86d1ad4962a..3d2661ca654 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -30,6 +30,22 @@
 #include <asm/amd_nb.h>
 #include <asm/x86_init.h>
 
+/*
+ * Using 512M as goal, in case kexec will load kernel_big
+ * that will do the on-position decompress, and could overlap with
+ * with the gart aperture that is used.
+ * Sequence:
+ * kernel_small
+ * ==> kexec (with kdump trigger path or gart still enabled)
+ * ==> kernel_small (gart area become e820_reserved)
+ * ==> kexec (with kdump trigger path or gart still enabled)
+ * ==> kerne_big (uncompressed size will be big than 64M or 128M)
+ * So don't use 512M below as gart iommu, leave the space for kernel
+ * code for safe.
+ */
+#define GART_MIN_ADDR	(512ULL << 20)
+#define GART_MAX_ADDR	(1ULL   << 32)
+
 int gart_iommu_aperture;
 int gart_iommu_aperture_disabled __initdata;
 int gart_iommu_aperture_allowed __initdata;
@@ -70,21 +86,9 @@ static u32 __init allocate_aperture(void)
 	 * memory. Unfortunately we cannot move it up because that would
 	 * make the IOMMU useless.
 	 */
-	/*
-	 * using 512M as goal, in case kexec will load kernel_big
-	 * that will do the on position decompress, and  could overlap with
-	 * that position with gart that is used.
-	 * sequende:
-	 * kernel_small
-	 * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
-	 * ==> kernel_small(gart area become e820_reserved)
-	 * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
-	 * ==> kerne_big (uncompressed size will be big than 64M or 128M)
-	 * so don't use 512M below as gart iommu, leave the space for kernel
-	 * code for safe
-	 */
-	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
-	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
+	addr = memblock_find_in_range(GART_MIN_ADDR, GART_MAX_ADDR,
+				      aper_size, aper_size);
+	if (addr == MEMBLOCK_ERROR || addr + aper_size > GART_MAX_ADDR) {
 		printk(KERN_ERR
 			"Cannot allocate aperture memory hole (%lx,%uK)\n",
 				addr, aper_size>>10);
@@ -499,7 +503,7 @@ out:
 		 * Don't enable translation yet but enable GART IO and CPU
 		 * accesses and set DISTLBWALKPRB since GART table memory is UC.
 		 */
-		u32 ctl = DISTLBWALKPRB | aper_order << 1;
+		u32 ctl = aper_order << 1;
 
 		bus = amd_nb_bus_dev_ranges[i].bus;
 		dev_base = amd_nb_bus_dev_ranges[i].dev_base;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index fabf01eff77..f92a8e5d1e2 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -505,7 +505,7 @@ static void __cpuinit setup_APIC_timer(void)
 {
 	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 
-	if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) {
+	if (this_cpu_has(X86_FEATURE_ARAT)) {
 		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
 		/* Make LAPIC timer preferrable over percpu HPET */
 		lapic_clockevent.rating = 150;
@@ -1237,6 +1237,17 @@ void __cpuinit setup_local_APIC(void)
 	/* always use the value from LDR */
 	early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
 		logical_smp_processor_id();
+
+	/*
+	 * Some NUMA implementations (NUMAQ) don't initialize apicid to
+	 * node mapping during NUMA init.  Now that logical apicid is
+	 * guaranteed to be known, give it another chance.  This is already
+	 * a bit too late - percpu allocation has already happened without
+	 * proper NUMA affinity.
+	 */
+	if (apic->x86_32_numa_cpu_node)
+		set_apicid_to_node(early_per_cpu(x86_cpu_to_apicid, cpu),
+				   apic->x86_32_numa_cpu_node(cpu));
 #endif
 
 	/*
@@ -1812,30 +1823,41 @@ void smp_spurious_interrupt(struct pt_regs *regs)
  */
 void smp_error_interrupt(struct pt_regs *regs)
 {
-	u32 v, v1;
+	u32 v0, v1;
+	u32 i = 0;
+	static const char * const error_interrupt_reason[] = {
+		"Send CS error",		/* APIC Error Bit 0 */
+		"Receive CS error",		/* APIC Error Bit 1 */
+		"Send accept error",		/* APIC Error Bit 2 */
+		"Receive accept error",		/* APIC Error Bit 3 */
+		"Redirectable IPI",		/* APIC Error Bit 4 */
+		"Send illegal vector",		/* APIC Error Bit 5 */
+		"Received illegal vector",	/* APIC Error Bit 6 */
+		"Illegal register address",	/* APIC Error Bit 7 */
+	};
 
 	exit_idle();
 	irq_enter();
 	/* First tickle the hardware, only then report what went on. -- REW */
-	v = apic_read(APIC_ESR);
+	v0 = apic_read(APIC_ESR);
 	apic_write(APIC_ESR, 0);
 	v1 = apic_read(APIC_ESR);
 	ack_APIC_irq();
 	atomic_inc(&irq_err_count);
 
-	/*
-	 * Here is what the APIC error bits mean:
-	 * 0: Send CS error
-	 * 1: Receive CS error
-	 * 2: Send accept error
-	 * 3: Receive accept error
-	 * 4: Reserved
-	 * 5: Send illegal vector
-	 * 6: Received illegal vector
-	 * 7: Illegal register address
-	 */
-	pr_debug("APIC error on CPU%d: %02x(%02x)\n",
-		smp_processor_id(), v , v1);
+	apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x(%02x)",
+		    smp_processor_id(), v0 , v1);
+
+	v1 = v1 & 0xff;
+	while (v1) {
+		if (v1 & 0x1)
+			apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]);
+		i++;
+		v1 >>= 1;
+	};
+
+	apic_printk(APIC_DEBUG, KERN_CONT "\n");
+
 	irq_exit();
 }
 
@@ -2003,21 +2025,6 @@ void default_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-#ifdef CONFIG_X86_32
-int default_x86_32_numa_cpu_node(int cpu)
-{
-#ifdef CONFIG_NUMA
-	int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
-
-	if (apicid != BAD_APICID)
-		return __apicid_to_node[apicid];
-	return NUMA_NO_NODE;
-#else
-	return 0;
-#endif
-}
-#endif
-
 /*
  * Power management
  */
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index f1baa2dc087..775b82bc655 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -119,14 +119,6 @@ static void noop_apic_write(u32 reg, u32 v)
 	WARN_ON_ONCE(cpu_has_apic && !disable_apic);
 }
 
-#ifdef CONFIG_X86_32
-static int noop_x86_32_numa_cpu_node(int cpu)
-{
-	/* we're always on node 0 */
-	return 0;
-}
-#endif
-
 struct apic apic_noop = {
 	.name				= "noop",
 	.probe				= noop_probe,
@@ -195,6 +187,5 @@ struct apic apic_noop = {
 
 #ifdef CONFIG_X86_32
 	.x86_32_early_logical_apicid	= noop_x86_32_early_logical_apicid,
-	.x86_32_numa_cpu_node		= noop_x86_32_numa_cpu_node,
 #endif
 };
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 541a2e43165..d84ac5a584b 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -253,5 +253,4 @@ struct apic apic_bigsmp = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 
 	.x86_32_early_logical_apicid	= bigsmp_early_logical_apicid,
-	.x86_32_numa_cpu_node		= default_x86_32_numa_cpu_node,
 };
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 3e9de4854c5..70533de5bd2 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -510,11 +510,6 @@ static void es7000_setup_apic_routing(void)
 		nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
 }
 
-static int es7000_numa_cpu_node(int cpu)
-{
-	return 0;
-}
-
 static int es7000_cpu_present_to_apicid(int mps_cpu)
 {
 	if (!mps_cpu)
@@ -688,7 +683,6 @@ struct apic __refdata apic_es7000_cluster = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 
 	.x86_32_early_logical_apicid	= es7000_early_logical_apicid,
-	.x86_32_numa_cpu_node		= es7000_numa_cpu_node,
 };
 
 struct apic __refdata apic_es7000 = {
@@ -752,5 +746,4 @@ struct apic __refdata apic_es7000 = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 
 	.x86_32_early_logical_apicid	= es7000_early_logical_apicid,
-	.x86_32_numa_cpu_node		= es7000_numa_cpu_node,
 };
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index c4e557a1ebb..5260fe91bcb 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/nmi.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
 u64 hw_nmi_get_sample_period(void)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 68df09bba92..45fd33d1fd3 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -128,8 +128,8 @@ static int __init parse_noapic(char *str)
 }
 early_param("noapic", parse_noapic);
 
-static int io_apic_setup_irq_pin_once(unsigned int irq, int node,
-				      struct io_apic_irq_attr *attr);
+static int io_apic_setup_irq_pin(unsigned int irq, int node,
+				 struct io_apic_irq_attr *attr);
 
 /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */
 void mp_save_irq(struct mpc_intsrc *m)
@@ -3570,7 +3570,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 }
 #endif /* CONFIG_HT_IRQ */
 
-int
+static int
 io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr)
 {
 	struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node);
@@ -3585,8 +3585,8 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr)
 	return ret;
 }
 
-static int io_apic_setup_irq_pin_once(unsigned int irq, int node,
-				      struct io_apic_irq_attr *attr)
+int io_apic_setup_irq_pin_once(unsigned int irq, int node,
+			       struct io_apic_irq_attr *attr)
 {
 	unsigned int id = attr->ioapic, pin = attr->ioapic_pin;
 	int ret;
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 6273eee5134..30f13319e24 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -48,8 +48,6 @@
 #include <asm/e820.h>
 #include <asm/ipi.h>
 
-#define	MB_TO_PAGES(addr)		((addr) << (20 - PAGE_SHIFT))
-
 int found_numaq;
 
 /*
@@ -79,31 +77,20 @@ int					quad_local_to_mp_bus_id[NR_CPUS/4][4];
 static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
 {
 	struct eachquadmem *eq = scd->eq + node;
+	u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20;
+	u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20;
+	int ret;
 
-	node_set_online(node);
-
-	/* Convert to pages */
-	node_start_pfn[node] =
-		 MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
-
-	node_end_pfn[node] =
-		 MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
-
-	memblock_x86_register_active_regions(node, node_start_pfn[node],
-						node_end_pfn[node]);
-
-	memory_present(node, node_start_pfn[node], node_end_pfn[node]);
-
-	node_remap_size[node] = node_memmap_size_bytes(node,
-					node_start_pfn[node],
-					node_end_pfn[node]);
+	node_set(node, numa_nodes_parsed);
+	ret = numa_add_memblk(node, start, end);
+	BUG_ON(ret < 0);
 }
 
 /*
  * Function: smp_dump_qct()
  *
  * Description: gets memory layout from the quad config table.  This
- * function also updates node_online_map with the nodes (quads) present.
+ * function also updates numa_nodes_parsed with the nodes (quads) present.
  */
 static void __init smp_dump_qct(void)
 {
@@ -112,7 +99,6 @@ static void __init smp_dump_qct(void)
 
 	scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
 
-	nodes_clear(node_online_map);
 	for_each_node(node) {
 		if (scd->quads_present31_0 & (1 << node))
 			numaq_register_node(node, scd);
@@ -282,14 +268,14 @@ static __init void early_check_numaq(void)
 	}
 }
 
-int __init get_memcfg_numaq(void)
+int __init numaq_numa_init(void)
 {
 	early_check_numaq();
 	if (!found_numaq)
-		return 0;
+		return -ENOENT;
 	smp_dump_qct();
 
-	return 1;
+	return 0;
 }
 
 #define NUMAQ_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index fc84c7b6110..6541e471fd9 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -172,7 +172,6 @@ struct apic apic_default = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 
 	.x86_32_early_logical_apicid	= default_x86_32_early_logical_apicid,
-	.x86_32_numa_cpu_node		= default_x86_32_numa_cpu_node,
 };
 
 extern struct apic apic_numaq;
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index e4b8059b414..35bcd7d995a 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -551,5 +551,4 @@ struct apic apic_summit = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 
 	.x86_32_early_logical_apicid	= summit_early_logical_apicid,
-	.x86_32_numa_cpu_node		= default_x86_32_numa_cpu_node,
 };
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 3c289281394..7acd2d2ac96 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -23,6 +23,8 @@
 #include <linux/io.h>
 #include <linux/pci.h>
 #include <linux/kdebug.h>
+#include <linux/delay.h>
+#include <linux/crash_dump.h>
 
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
@@ -34,6 +36,14 @@
 #include <asm/ipi.h>
 #include <asm/smp.h>
 #include <asm/x86_init.h>
+#include <asm/emergency-restart.h>
+#include <asm/nmi.h>
+
+/* BMC sets a bit this MMR non-zero before sending an NMI */
+#define UVH_NMI_MMR				UVH_SCRATCH5
+#define UVH_NMI_MMR_CLEAR			(UVH_NMI_MMR + 8)
+#define UV_NMI_PENDING_MASK			(1UL << 63)
+DEFINE_PER_CPU(unsigned long, cpu_last_nmi_count);
 
 DEFINE_PER_CPU(int, x2apic_extra_bits);
 
@@ -639,18 +649,46 @@ void __cpuinit uv_cpu_init(void)
  */
 int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data)
 {
+	unsigned long real_uv_nmi;
+	int bid;
+
 	if (reason != DIE_NMIUNKNOWN)
 		return NOTIFY_OK;
 
 	if (in_crash_kexec)
 		/* do nothing if entering the crash kernel */
 		return NOTIFY_OK;
+
+	/*
+	 * Each blade has an MMR that indicates when an NMI has been sent
+	 * to cpus on the blade. If an NMI is detected, atomically
+	 * clear the MMR and update a per-blade NMI count used to
+	 * cause each cpu on the blade to notice a new NMI.
+	 */
+	bid = uv_numa_blade_id();
+	real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK);
+
+	if (unlikely(real_uv_nmi)) {
+		spin_lock(&uv_blade_info[bid].nmi_lock);
+		real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK);
+		if (real_uv_nmi) {
+			uv_blade_info[bid].nmi_count++;
+			uv_write_local_mmr(UVH_NMI_MMR_CLEAR, UV_NMI_PENDING_MASK);
+		}
+		spin_unlock(&uv_blade_info[bid].nmi_lock);
+	}
+
+	if (likely(__get_cpu_var(cpu_last_nmi_count) == uv_blade_info[bid].nmi_count))
+		return NOTIFY_DONE;
+
+	__get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count;
+
 	/*
-	 * Use a lock so only one cpu prints at a time
-	 * to prevent intermixed output.
+	 * Use a lock so only one cpu prints at a time.
+	 * This prevents intermixed output.
 	 */
 	spin_lock(&uv_nmi_lock);
-	pr_info("NMI stack dump cpu %u:\n", smp_processor_id());
+	pr_info("UV NMI stack dump cpu %u:\n", smp_processor_id());
 	dump_stack();
 	spin_unlock(&uv_nmi_lock);
 
@@ -658,7 +696,8 @@ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data)
 }
 
 static struct notifier_block uv_dump_stack_nmi_nb = {
-	.notifier_call	= uv_handle_nmi
+	.notifier_call	= uv_handle_nmi,
+	.priority = NMI_LOCAL_LOW_PRIOR - 1,
 };
 
 void uv_register_nmi_notifier(void)
@@ -717,8 +756,9 @@ void __init uv_system_init(void)
 	printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
 
 	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
-	uv_blade_info = kmalloc(bytes, GFP_KERNEL);
+	uv_blade_info = kzalloc(bytes, GFP_KERNEL);
 	BUG_ON(!uv_blade_info);
+
 	for (blade = 0; blade < uv_num_possible_blades(); blade++)
 		uv_blade_info[blade].memory_nid = -1;
 
@@ -744,6 +784,7 @@ void __init uv_system_init(void)
 			uv_blade_info[blade].pnode = pnode;
 			uv_blade_info[blade].nr_possible_cpus = 0;
 			uv_blade_info[blade].nr_online_cpus = 0;
+			spin_lock_init(&uv_blade_info[blade].nmi_lock);
 			max_pnode = max(pnode, max_pnode);
 			blade++;
 		}
@@ -810,4 +851,11 @@ void __init uv_system_init(void)
 
 	/* register Legacy VGA I/O redirection handler */
 	pci_register_set_vga_state(uv_set_vga_state);
+
+	/*
+	 * For a kdump kernel the reset must be BOOT_ACPI, not BOOT_EFI, as
+	 * EFI is not enabled in the kdump kernel.
+	 */
+	if (is_kdump_kernel())
+		reboot_type = BOOT_ACPI;
 }
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 0b4be431c62..3bfa0223596 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -228,6 +228,7 @@
 #include <linux/kthread.h>
 #include <linux/jiffies.h>
 #include <linux/acpi.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -1237,7 +1238,7 @@ static int suspend(int vetoable)
 	dpm_suspend_noirq(PMSG_SUSPEND);
 
 	local_irq_disable();
-	sysdev_suspend(PMSG_SUSPEND);
+	syscore_suspend();
 
 	local_irq_enable();
 
@@ -1255,7 +1256,7 @@ static int suspend(int vetoable)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
 
-	sysdev_resume();
+	syscore_resume();
 	local_irq_enable();
 
 	dpm_resume_noirq(PMSG_RESUME);
@@ -1279,7 +1280,7 @@ static void standby(void)
 	dpm_suspend_noirq(PMSG_SUSPEND);
 
 	local_irq_disable();
-	sysdev_suspend(PMSG_SUSPEND);
+	syscore_suspend();
 	local_irq_enable();
 
 	err = set_system_power_state(APM_STATE_STANDBY);
@@ -1287,7 +1288,7 @@ static void standby(void)
 		apm_error("standby", err);
 
 	local_irq_disable();
-	sysdev_resume();
+	syscore_resume();
 	local_irq_enable();
 
 	dpm_resume_noirq(PMSG_RESUME);
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 3f0ebe429a0..6042981d030 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
 
 obj-$(CONFIG_X86_MCE)			+= mcheck/
 obj-$(CONFIG_MTRR)			+= mtrr/
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq/
 
 obj-$(CONFIG_X86_LOCAL_APIC)		+= perfctr-watchdog.o
 
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 3ecece0217e..6f9d1f6063e 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -613,8 +613,27 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 #endif
 
 	/* As a rule processors have APIC timer running in deep C states */
-	if (c->x86 >= 0xf && !cpu_has_amd_erratum(amd_erratum_400))
+	if (c->x86 > 0xf && !cpu_has_amd_erratum(amd_erratum_400))
 		set_cpu_cap(c, X86_FEATURE_ARAT);
+
+	/*
+	 * Disable GART TLB Walk Errors on Fam10h. We do this here
+	 * because this is always needed when GART is enabled, even in a
+	 * kernel which has no MCE support built in.
+	 */
+	if (c->x86 == 0x10) {
+		/*
+		 * BIOS should disable GartTlbWlk Errors themself. If
+		 * it doesn't do it here as suggested by the BKDG.
+		 *
+		 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
+		 */
+		u64 mask;
+
+		rdmsrl(MSR_AMD64_MCx_MASK(4), mask);
+		mask |= (1 << 10);
+		wrmsrl(MSR_AMD64_MCx_MASK(4), mask);
+	}
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index e2ced0074a4..cbc70a27430 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -254,6 +254,25 @@ static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 }
 #endif
 
+static int disable_smep __initdata;
+static __init int setup_disable_smep(char *arg)
+{
+	disable_smep = 1;
+	return 1;
+}
+__setup("nosmep", setup_disable_smep);
+
+static __init void setup_smep(struct cpuinfo_x86 *c)
+{
+	if (cpu_has(c, X86_FEATURE_SMEP)) {
+		if (unlikely(disable_smep)) {
+			setup_clear_cpu_cap(X86_FEATURE_SMEP);
+			clear_in_cr4(X86_CR4_SMEP);
+		} else
+			set_in_cr4(X86_CR4_SMEP);
+	}
+}
+
 /*
  * Some CPU features depend on higher CPUID levels, which may not always
  * be available due to CPUID level capping or broken virtualization
@@ -565,8 +584,7 @@ void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
 
 		cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx);
 
-		if (eax > 0)
-			c->x86_capability[9] = ebx;
+		c->x86_capability[9] = ebx;
 	}
 
 	/* AMD-defined flags: level 0x80000001 */
@@ -668,6 +686,8 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 	c->cpu_index = 0;
 #endif
 	filter_cpuid_features(c, false);
+
+	setup_smep(c);
 }
 
 void __init early_cpu_init(void)
@@ -753,6 +773,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 #endif
 	}
 
+	setup_smep(c);
+
 	get_model_name(c); /* Default name */
 
 	detect_nopl(c);
diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile
deleted file mode 100644
index bd54bf67e6f..00000000000
--- a/arch/x86/kernel/cpu/cpufreq/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
-# K8 systems. ACPI is preferred to all other hardware-specific drivers.
-# speedstep-* is preferred over p4-clockmod.
-
-obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o mperf.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o mperf.o
-obj-$(CONFIG_X86_PCC_CPUFREQ)		+= pcc-cpufreq.o
-obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
-obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
-obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
-obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
-obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
-obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
-obj-$(CONFIG_X86_LONGRUN)		+= longrun.o  
-obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
-obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
-obj-$(CONFIG_X86_SPEEDSTEP_LIB)		+= speedstep-lib.o
-obj-$(CONFIG_X86_SPEEDSTEP_SMI)		+= speedstep-smi.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
-obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
-obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index df86bc8c859..1edf5ba4fb2 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -29,10 +29,10 @@
 
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
+	u64 misc_enable;
+
 	/* Unmask CPUID levels if masked: */
 	if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
-		u64 misc_enable;
-
 		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
 
 		if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) {
@@ -118,8 +118,6 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 	 * (model 2) with the same problem.
 	 */
 	if (c->x86 == 15) {
-		u64 misc_enable;
-
 		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
 
 		if (misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING) {
@@ -130,6 +128,19 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 		}
 	}
 #endif
+
+	/*
+	 * If fast string is not enabled in IA32_MISC_ENABLE for any reason,
+	 * clear the fast string and enhanced fast string CPU capabilities.
+	 */
+	if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
+		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+		if (!(misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING)) {
+			printk(KERN_INFO "Disabled fast string operations\n");
+			setup_clear_cpu_cap(X86_FEATURE_REP_GOOD);
+			setup_clear_cpu_cap(X86_FEATURE_ERMS);
+		}
+	}
 }
 
 #ifdef CONFIG_X86_32
@@ -400,12 +411,10 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 
 		switch (c->x86_model) {
 		case 5:
-			if (c->x86_mask == 0) {
-				if (l2 == 0)
-					p = "Celeron (Covington)";
-				else if (l2 == 256)
-					p = "Mobile Pentium II (Dixon)";
-			}
+			if (l2 == 0)
+				p = "Celeron (Covington)";
+			else if (l2 == 256)
+				p = "Mobile Pentium II (Dixon)";
 			break;
 
 		case 6:
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 1ce1af2899d..c105c533ed9 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -327,7 +327,6 @@ static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3)
 	l3->subcaches[2] = sc2 = !(val & BIT(8))  + !(val & BIT(9));
 	l3->subcaches[3] = sc3 = !(val & BIT(12)) + !(val & BIT(13));
 
-	l3->indices = (max(max(max(sc0, sc1), sc2), sc3) << 10) - 1;
 	l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
 }
 
@@ -454,27 +453,16 @@ int amd_set_l3_disable_slot(struct amd_l3_cache *l3, int cpu, unsigned slot,
 {
 	int ret = 0;
 
-#define SUBCACHE_MASK	(3UL << 20)
-#define SUBCACHE_INDEX	0xfff
-
-	/*
-	 * check whether this slot is already used or
-	 * the index is already disabled
-	 */
+	/*  check if @slot is already used or the index is already disabled */
 	ret = amd_get_l3_disable_slot(l3, slot);
 	if (ret >= 0)
 		return -EINVAL;
 
-	/*
-	 * check whether the other slot has disabled the
-	 * same index already
-	 */
-	if (index == amd_get_l3_disable_slot(l3, !slot))
+	if (index > l3->indices)
 		return -EINVAL;
 
-	/* do not allow writes outside of allowed bits */
-	if ((index & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) ||
-	    ((index & SUBCACHE_INDEX) > l3->indices))
+	/* check whether the other slot has disabled the same index already */
+	if (index == amd_get_l3_disable_slot(l3, !slot))
 		return -EINVAL;
 
 	amd_l3_disable_index(l3, cpu, slot, index);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 5a05ef63eb4..ff1ae9b6464 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -105,20 +105,6 @@ static int			cpu_missing;
 ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
 EXPORT_SYMBOL_GPL(x86_mce_decoder_chain);
 
-static int default_decode_mce(struct notifier_block *nb, unsigned long val,
-			       void *data)
-{
-	pr_emerg(HW_ERR "No human readable MCE decoding support on this CPU type.\n");
-	pr_emerg(HW_ERR "Run the message through 'mcelog --ascii' to decode.\n");
-
-	return NOTIFY_STOP;
-}
-
-static struct notifier_block mce_dec_nb = {
-	.notifier_call = default_decode_mce,
-	.priority      = -1,
-};
-
 /* MCA banks polled by the period polling timer for corrected events */
 DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
 	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
@@ -212,6 +198,8 @@ void mce_log(struct mce *mce)
 
 static void print_mce(struct mce *m)
 {
+	int ret = 0;
+
 	pr_emerg(HW_ERR "CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n",
 	       m->extcpu, m->mcgstatus, m->bank, m->status);
 
@@ -239,7 +227,11 @@ static void print_mce(struct mce *m)
 	 * Print out human-readable details about the MCE error,
 	 * (if the CPU has an implementation for that)
 	 */
-	atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
+	ret = atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
+	if (ret == NOTIFY_STOP)
+		return;
+
+	pr_emerg_ratelimited(HW_ERR "Run the above through 'mcelog --ascii'\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -590,7 +582,6 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
 			mce_log(&m);
 			atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m);
-			add_taint(TAINT_MACHINE_CHECK);
 		}
 
 		/*
@@ -1626,7 +1617,7 @@ out:
 static unsigned int mce_poll(struct file *file, poll_table *wait)
 {
 	poll_wait(file, &mce_wait, wait);
-	if (rcu_dereference_check_mce(mcelog.next))
+	if (rcu_access_index(mcelog.next))
 		return POLLIN | POLLRDNORM;
 	if (!mce_apei_read_done && apei_check_mce())
 		return POLLIN | POLLRDNORM;
@@ -1722,8 +1713,6 @@ __setup("mce", mcheck_enable);
 
 int __init mcheck_init(void)
 {
-	atomic_notifier_chain_register(&x86_mce_decoder_chain, &mce_dec_nb);
-
 	mcheck_intel_therm_init();
 
 	return 0;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 167f97b5596..bb0adad3514 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -509,6 +509,7 @@ recurse:
 out_free:
 	if (b) {
 		kobject_put(&b->kobj);
+		list_del(&b->miscj);
 		kfree(b);
 	}
 	return err;
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 6f8c5e9da97..27c625178bf 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -187,8 +187,6 @@ static int therm_throt_process(bool new_event, int event, int level)
 				this_cpu,
 				level == CORE_LEVEL ? "Core" : "Package",
 				state->count);
-
-		add_taint(TAINT_MACHINE_CHECK);
 		return 1;
 	}
 	if (old_event) {
@@ -355,7 +353,6 @@ static void notify_thresholds(__u64 msr_val)
 static void intel_thermal_interrupt(void)
 {
 	__u64 msr_val;
-	struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
 
@@ -367,19 +364,19 @@ static void intel_thermal_interrupt(void)
 				CORE_LEVEL) != 0)
 		mce_log_therm_throt_event(CORE_THROTTLED | msr_val);
 
-	if (cpu_has(c, X86_FEATURE_PLN))
+	if (this_cpu_has(X86_FEATURE_PLN))
 		if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
 					POWER_LIMIT_EVENT,
 					CORE_LEVEL) != 0)
 			mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val);
 
-	if (cpu_has(c, X86_FEATURE_PTS)) {
+	if (this_cpu_has(X86_FEATURE_PTS)) {
 		rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
 		if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
 					THERMAL_THROTTLING_EVENT,
 					PACKAGE_LEVEL) != 0)
 			mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val);
-		if (cpu_has(c, X86_FEATURE_PLN))
+		if (this_cpu_has(X86_FEATURE_PLN))
 			if (therm_throt_process(msr_val &
 					PACKAGE_THERM_STATUS_POWER_LIMIT,
 					POWER_LIMIT_EVENT,
@@ -393,7 +390,6 @@ static void unexpected_thermal_interrupt(void)
 {
 	printk(KERN_ERR "CPU%d: Unexpected LVT thermal interrupt!\n",
 			smp_processor_id());
-	add_taint(TAINT_MACHINE_CHECK);
 }
 
 static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;
@@ -446,18 +442,20 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 	 */
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 
+	h = lvtthmr_init;
 	/*
 	 * The initial value of thermal LVT entries on all APs always reads
 	 * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
 	 * sequence to them and LVT registers are reset to 0s except for
 	 * the mask bits which are set to 1s when APs receive INIT IPI.
-	 * Always restore the value that BIOS has programmed on AP based on
-	 * BSP's info we saved since BIOS is always setting the same value
-	 * for all threads/cores
+	 * If BIOS takes over the thermal interrupt and sets its interrupt
+	 * delivery mode to SMI (not fixed), it restores the value that the
+	 * BIOS has programmed on AP based on BSP's info we saved since BIOS
+	 * is always setting the same value for all threads/cores.
 	 */
-	apic_write(APIC_LVTTHMR, lvtthmr_init);
+	if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED)
+		apic_write(APIC_LVTTHMR, lvtthmr_init);
 
-	h = lvtthmr_init;
 
 	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 307dfbbf4a8..929739a653d 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -293,14 +293,24 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 
 	/*
 	 * HACK!
-	 * We use this same function to initialize the mtrrs on boot.
-	 * The state of the boot cpu's mtrrs has been saved, and we want
-	 * to replicate across all the APs.
-	 * If we're doing that @reg is set to something special...
+	 *
+	 * We use this same function to initialize the mtrrs during boot,
+	 * resume, runtime cpu online and on an explicit request to set a
+	 * specific MTRR.
+	 *
+	 * During boot or suspend, the state of the boot cpu's mtrrs has been
+	 * saved, and we want to replicate that across all the cpus that come
+	 * online (either at the end of boot or resume or during a runtime cpu
+	 * online). If we're doing that, @reg is set to something special and on
+	 * this cpu we still do mtrr_if->set_all(). During boot/resume, this
+	 * is unnecessary if at this point we are still on the cpu that started
+	 * the boot/resume sequence. But there is no guarantee that we are still
+	 * on the same cpu. So we do mtrr_if->set_all() on this cpu aswell to be
+	 * sure that we are in sync with everyone else.
 	 */
 	if (reg != ~0U)
 		mtrr_if->set(reg, base, size, type);
-	else if (!mtrr_aps_delayed_init)
+	else
 		mtrr_if->set_all();
 
 	/* Wait for the others */
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index eed3673a865..3a0338b4b17 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -31,6 +31,7 @@
 #include <asm/nmi.h>
 #include <asm/compat.h>
 #include <asm/smp.h>
+#include <asm/alternative.h>
 
 #if 0
 #undef wrmsrl
@@ -363,12 +364,18 @@ again:
 	return new_raw_count;
 }
 
-/* using X86_FEATURE_PERFCTR_CORE to later implement ALTERNATIVE() here */
 static inline int x86_pmu_addr_offset(int index)
 {
-	if (boot_cpu_has(X86_FEATURE_PERFCTR_CORE))
-		return index << 1;
-	return index;
+	int offset;
+
+	/* offset = X86_FEATURE_PERFCTR_CORE ? index << 1 : index */
+	alternative_io(ASM_NOP2,
+		       "shll $1, %%eax",
+		       X86_FEATURE_PERFCTR_CORE,
+		       "=a" (offset),
+		       "a"  (index));
+
+	return offset;
 }
 
 static inline unsigned int x86_pmu_config_addr(int index)
@@ -586,8 +593,12 @@ static int x86_setup_perfctr(struct perf_event *event)
 			return -EOPNOTSUPP;
 	}
 
+	/*
+	 * Do not allow config1 (extended registers) to propagate,
+	 * there's no sane user-space generalization yet:
+	 */
 	if (attr->type == PERF_TYPE_RAW)
-		return x86_pmu_extra_regs(event->attr.config, event);
+		return 0;
 
 	if (attr->type == PERF_TYPE_HW_CACHE)
 		return set_ext_hw_attr(hwc, event);
@@ -609,8 +620,8 @@ static int x86_setup_perfctr(struct perf_event *event)
 	/*
 	 * Branch tracing:
 	 */
-	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
-	    (hwc->sample_period == 1)) {
+	if (attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS &&
+	    !attr->freq && hwc->sample_period == 1) {
 		/* BTS is not supported by this architecture. */
 		if (!x86_pmu.bts_active)
 			return -EOPNOTSUPP;
@@ -1284,6 +1295,16 @@ static int x86_pmu_handle_irq(struct pt_regs *regs)
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
+	/*
+	 * Some chipsets need to unmask the LVTPC in a particular spot
+	 * inside the nmi handler.  As a result, the unmasking was pushed
+	 * into all the nmi handlers.
+	 *
+	 * This generic handler doesn't seem to have any issues where the
+	 * unmasking occurs so it was left at the top.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		if (!test_bit(idx, cpuc->active_mask)) {
 			/*
@@ -1370,8 +1391,6 @@ perf_event_nmi_handler(struct notifier_block *self,
 		return NOTIFY_DONE;
 	}
 
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-
 	handled = x86_pmu.handle_irq(args->regs);
 	if (!handled)
 		return NOTIFY_DONE;
@@ -1754,17 +1773,6 @@ static struct pmu pmu = {
  * callchain support
  */
 
-static void
-backtrace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-	/* Ignore warnings */
-}
-
-static void backtrace_warning(void *data, char *msg)
-{
-	/* Ignore warnings */
-}
-
 static int backtrace_stack(void *data, char *name)
 {
 	return 0;
@@ -1778,8 +1786,6 @@ static void backtrace_address(void *data, unsigned long addr, int reliable)
 }
 
 static const struct stacktrace_ops backtrace_ops = {
-	.warning		= backtrace_warning,
-	.warning_symbol		= backtrace_warning_symbol,
 	.stack			= backtrace_stack,
 	.address		= backtrace_address,
 	.walk_stack		= print_context_stack_bp,
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 461f62bbd77..fe29c1d2219 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -8,7 +8,7 @@ static __initconst const u64 amd_hw_cache_event_ids
  [ C(L1D) ] = {
 	[ C(OP_READ) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
-		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
+		[ C(RESULT_MISS)   ] = 0x0141, /* Data Cache Misses          */
 	},
 	[ C(OP_WRITE) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
@@ -96,12 +96,14 @@ static __initconst const u64 amd_hw_cache_event_ids
  */
 static const u64 amd_perfmon_event_map[] =
 {
-  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0076,
-  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0080,
-  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0081,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c2,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c3,
+  [PERF_COUNT_HW_CPU_CYCLES]			= 0x0076,
+  [PERF_COUNT_HW_INSTRUCTIONS]			= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]		= 0x0080,
+  [PERF_COUNT_HW_CACHE_MISSES]			= 0x0081,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]		= 0x00c2,
+  [PERF_COUNT_HW_BRANCH_MISSES]			= 0x00c3,
+  [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= 0x00d0, /* "Decoder empty" event */
+  [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= 0x00d1, /* "Dispatch stalls" event */
 };
 
 static u64 amd_pmu_event_map(int hw_event)
@@ -427,7 +429,9 @@ static __initconst const struct x86_pmu amd_pmu = {
  *
  * Exceptions:
  *
+ * 0x000	FP	PERF_CTL[3], PERF_CTL[5:3] (*)
  * 0x003	FP	PERF_CTL[3]
+ * 0x004	FP	PERF_CTL[3], PERF_CTL[5:3] (*)
  * 0x00B	FP	PERF_CTL[3]
  * 0x00D	FP	PERF_CTL[3]
  * 0x023	DE	PERF_CTL[2:0]
@@ -448,6 +452,8 @@ static __initconst const struct x86_pmu amd_pmu = {
  * 0x0DF	LS	PERF_CTL[5:0]
  * 0x1D6	EX	PERF_CTL[5:0]
  * 0x1D8	EX	PERF_CTL[5:0]
+ *
+ * (*) depending on the umask all FPU counters may be used
  */
 
 static struct event_constraint amd_f15_PMC0  = EVENT_CONSTRAINT(0, 0x01, 0);
@@ -460,18 +466,28 @@ static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0);
 static struct event_constraint *
 amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, struct perf_event *event)
 {
-	unsigned int event_code = amd_get_event_code(&event->hw);
+	struct hw_perf_event *hwc = &event->hw;
+	unsigned int event_code = amd_get_event_code(hwc);
 
 	switch (event_code & AMD_EVENT_TYPE_MASK) {
 	case AMD_EVENT_FP:
 		switch (event_code) {
+		case 0x000:
+			if (!(hwc->config & 0x0000F000ULL))
+				break;
+			if (!(hwc->config & 0x00000F00ULL))
+				break;
+			return &amd_f15_PMC3;
+		case 0x004:
+			if (hweight_long(hwc->config & ARCH_PERFMON_EVENTSEL_UMASK) <= 1)
+				break;
+			return &amd_f15_PMC3;
 		case 0x003:
 		case 0x00B:
 		case 0x00D:
 			return &amd_f15_PMC3;
-		default:
-			return &amd_f15_PMC53;
 		}
+		return &amd_f15_PMC53;
 	case AMD_EVENT_LS:
 	case AMD_EVENT_DC:
 	case AMD_EVENT_EX_LS:
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 8fc2b2cee1d..41178c826c4 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -25,7 +25,7 @@ struct intel_percore {
 /*
  * Intel PerfMon, used on Core and later.
  */
-static const u64 intel_perfmon_event_map[] =
+static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly =
 {
   [PERF_COUNT_HW_CPU_CYCLES]		= 0x003c,
   [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
@@ -36,7 +36,7 @@ static const u64 intel_perfmon_event_map[] =
   [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
 };
 
-static struct event_constraint intel_core_event_constraints[] =
+static struct event_constraint intel_core_event_constraints[] __read_mostly =
 {
 	INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
 	INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
@@ -47,7 +47,7 @@ static struct event_constraint intel_core_event_constraints[] =
 	EVENT_CONSTRAINT_END
 };
 
-static struct event_constraint intel_core2_event_constraints[] =
+static struct event_constraint intel_core2_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -70,7 +70,7 @@ static struct event_constraint intel_core2_event_constraints[] =
 	EVENT_CONSTRAINT_END
 };
 
-static struct event_constraint intel_nehalem_event_constraints[] =
+static struct event_constraint intel_nehalem_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -86,19 +86,19 @@ static struct event_constraint intel_nehalem_event_constraints[] =
 	EVENT_CONSTRAINT_END
 };
 
-static struct extra_reg intel_nehalem_extra_regs[] =
+static struct extra_reg intel_nehalem_extra_regs[] __read_mostly =
 {
 	INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff),
 	EVENT_EXTRA_END
 };
 
-static struct event_constraint intel_nehalem_percore_constraints[] =
+static struct event_constraint intel_nehalem_percore_constraints[] __read_mostly =
 {
 	INTEL_EVENT_CONSTRAINT(0xb7, 0),
 	EVENT_CONSTRAINT_END
 };
 
-static struct event_constraint intel_westmere_event_constraints[] =
+static struct event_constraint intel_westmere_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -110,7 +110,7 @@ static struct event_constraint intel_westmere_event_constraints[] =
 	EVENT_CONSTRAINT_END
 };
 
-static struct event_constraint intel_snb_event_constraints[] =
+static struct event_constraint intel_snb_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -123,21 +123,21 @@ static struct event_constraint intel_snb_event_constraints[] =
 	EVENT_CONSTRAINT_END
 };
 
-static struct extra_reg intel_westmere_extra_regs[] =
+static struct extra_reg intel_westmere_extra_regs[] __read_mostly =
 {
 	INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff),
 	INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0xffff),
 	EVENT_EXTRA_END
 };
 
-static struct event_constraint intel_westmere_percore_constraints[] =
+static struct event_constraint intel_westmere_percore_constraints[] __read_mostly =
 {
 	INTEL_EVENT_CONSTRAINT(0xb7, 0),
 	INTEL_EVENT_CONSTRAINT(0xbb, 0),
 	EVENT_CONSTRAINT_END
 };
 
-static struct event_constraint intel_gen_event_constraints[] =
+static struct event_constraint intel_gen_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
@@ -184,26 +184,23 @@ static __initconst const u64 snb_hw_cache_event_ids
 	},
  },
  [ C(LL  ) ] = {
-	/*
-	 * TBD: Need Off-core Response Performance Monitoring support
-	 */
 	[ C(OP_READ) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_WRITE) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_RFO.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_RFO.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_PREFETCH) ] = {
-		/* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
  },
  [ C(DTLB) ] = {
@@ -285,26 +282,26 @@ static __initconst const u64 westmere_hw_cache_event_ids
  },
  [ C(LL  ) ] = {
 	[ C(OP_READ) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	/*
 	 * Use RFO, not WRITEBACK, because a write miss would typically occur
 	 * on RFO.
 	 */
 	[ C(OP_WRITE) ] = {
-		/* OFFCORE_RESPONSE_1.ANY_RFO.LOCAL_CACHE */
-		[ C(RESULT_ACCESS) ] = 0x01bb,
-		/* OFFCORE_RESPONSE_0.ANY_RFO.ANY_LLC_MISS */
+		/* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
+		[ C(RESULT_ACCESS) ] = 0x01b7,
+		/* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
 		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_PREFETCH) ] = {
-		/* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
  },
  [ C(DTLB) ] = {
@@ -352,16 +349,36 @@ static __initconst const u64 westmere_hw_cache_event_ids
 };
 
 /*
- * OFFCORE_RESPONSE MSR bits (subset), See IA32 SDM Vol 3 30.6.1.3
+ * Nehalem/Westmere MSR_OFFCORE_RESPONSE bits;
+ * See IA32 SDM Vol 3B 30.6.1.3
  */
 
-#define DMND_DATA_RD     (1 << 0)
-#define DMND_RFO         (1 << 1)
-#define DMND_WB          (1 << 3)
-#define PF_DATA_RD       (1 << 4)
-#define PF_DATA_RFO      (1 << 5)
-#define RESP_UNCORE_HIT  (1 << 8)
-#define RESP_MISS        (0xf600) /* non uncore hit */
+#define NHM_DMND_DATA_RD	(1 << 0)
+#define NHM_DMND_RFO		(1 << 1)
+#define NHM_DMND_IFETCH		(1 << 2)
+#define NHM_DMND_WB		(1 << 3)
+#define NHM_PF_DATA_RD		(1 << 4)
+#define NHM_PF_DATA_RFO		(1 << 5)
+#define NHM_PF_IFETCH		(1 << 6)
+#define NHM_OFFCORE_OTHER	(1 << 7)
+#define NHM_UNCORE_HIT		(1 << 8)
+#define NHM_OTHER_CORE_HIT_SNP	(1 << 9)
+#define NHM_OTHER_CORE_HITM	(1 << 10)
+        			/* reserved */
+#define NHM_REMOTE_CACHE_FWD	(1 << 12)
+#define NHM_REMOTE_DRAM		(1 << 13)
+#define NHM_LOCAL_DRAM		(1 << 14)
+#define NHM_NON_DRAM		(1 << 15)
+
+#define NHM_ALL_DRAM		(NHM_REMOTE_DRAM|NHM_LOCAL_DRAM)
+
+#define NHM_DMND_READ		(NHM_DMND_DATA_RD)
+#define NHM_DMND_WRITE		(NHM_DMND_RFO|NHM_DMND_WB)
+#define NHM_DMND_PREFETCH	(NHM_PF_DATA_RD|NHM_PF_DATA_RFO)
+
+#define NHM_L3_HIT	(NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM)
+#define NHM_L3_MISS	(NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD)
+#define NHM_L3_ACCESS	(NHM_L3_HIT|NHM_L3_MISS)
 
 static __initconst const u64 nehalem_hw_cache_extra_regs
 				[PERF_COUNT_HW_CACHE_MAX]
@@ -370,16 +387,16 @@ static __initconst const u64 nehalem_hw_cache_extra_regs
 {
  [ C(LL  ) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = DMND_DATA_RD|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = DMND_DATA_RD|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_READ|NHM_L3_MISS,
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = DMND_RFO|DMND_WB|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = DMND_RFO|DMND_WB|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_WRITE|NHM_L3_MISS,
 	},
 	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = PF_DATA_RD|PF_DATA_RFO|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_PREFETCH|NHM_L3_MISS,
 	},
  }
 };
@@ -391,12 +408,12 @@ static __initconst const u64 nehalem_hw_cache_event_ids
 {
  [ C(L1D) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE         */
+		[ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS       */
+		[ C(RESULT_MISS)   ] = 0x0151, /* L1D.REPL                     */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE         */
+		[ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES      */
+		[ C(RESULT_MISS)   ] = 0x0251, /* L1D.M_REPL                   */
 	},
 	[ C(OP_PREFETCH) ] = {
 		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
@@ -933,6 +950,16 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
+	/*
+	 * Some chipsets need to unmask the LVTPC in a particular spot
+	 * inside the nmi handler.  As a result, the unmasking was pushed
+	 * into all the nmi handlers.
+	 *
+	 * This handler doesn't seem to have any issues with the unmasking
+	 * so it was left at the top.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+
 	intel_pmu_disable_all();
 	handled = intel_pmu_drain_bts_buffer();
 	status = intel_pmu_get_status();
@@ -998,6 +1025,9 @@ intel_bts_constraints(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	unsigned int hw_event, bts_event;
 
+	if (event->attr.freq)
+		return NULL;
+
 	hw_event = hwc->config & INTEL_ARCH_EVENT_MASK;
 	bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS);
 
@@ -1305,7 +1335,7 @@ static void intel_clovertown_quirks(void)
 	 * AJ106 could possibly be worked around by not allowing LBR
 	 *       usage from PEBS, including the fixup.
 	 * AJ68  could possibly be worked around by always programming
-	 * 	 a pebs_event_reset[0] value and coping with the lost events.
+	 *	 a pebs_event_reset[0] value and coping with the lost events.
 	 *
 	 * But taken together it might just make sense to not enable PEBS on
 	 * these chips.
@@ -1409,6 +1439,23 @@ static __init int intel_pmu_init(void)
 		x86_pmu.percore_constraints = intel_nehalem_percore_constraints;
 		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
 		x86_pmu.extra_regs = intel_nehalem_extra_regs;
+
+		/* UOPS_ISSUED.STALLED_CYCLES */
+		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e;
+		/* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */
+		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1;
+
+		if (ebx & 0x40) {
+			/*
+			 * Erratum AAJ80 detected, we work it around by using
+			 * the BR_MISP_EXEC.ANY event. This will over-count
+			 * branch-misses, but it's still much better than the
+			 * architectural event which is often completely bogus:
+			 */
+			intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
+
+			pr_cont("erratum AAJ80 worked around, ");
+		}
 		pr_cont("Nehalem events, ");
 		break;
 
@@ -1425,6 +1472,7 @@ static __init int intel_pmu_init(void)
 
 	case 37: /* 32 nm nehalem, "Clarkdale" */
 	case 44: /* 32 nm nehalem, "Gulftown" */
+	case 47: /* 32 nm Xeon E7 */
 		memcpy(hw_cache_event_ids, westmere_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, nehalem_hw_cache_extra_regs,
@@ -1437,6 +1485,12 @@ static __init int intel_pmu_init(void)
 		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
 		x86_pmu.pebs_constraints = intel_westmere_pebs_event_constraints;
 		x86_pmu.extra_regs = intel_westmere_extra_regs;
+
+		/* UOPS_ISSUED.STALLED_CYCLES */
+		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e;
+		/* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */
+		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1;
+
 		pr_cont("Westmere events, ");
 		break;
 
@@ -1448,6 +1502,12 @@ static __init int intel_pmu_init(void)
 
 		x86_pmu.event_constraints = intel_snb_event_constraints;
 		x86_pmu.pebs_constraints = intel_snb_pebs_events;
+
+		/* UOPS_ISSUED.ANY,c=1,i=1 to count stall cycles */
+		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e;
+		/* UOPS_DISPATCHED.THREAD,c=1,i=1 to count stall cycles*/
+		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x18001b1;
+
 		pr_cont("SandyBridge events, ");
 		break;
 
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index c2520e178d3..ead584fb6a7 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -468,7 +468,7 @@ static struct p4_event_bind p4_event_bind_map[] = {
 		.opcode		= P4_OPCODE(P4_EVENT_MISPRED_BRANCH_RETIRED),
 		.escr_msr	= { MSR_P4_CRU_ESCR0, MSR_P4_CRU_ESCR1 },
 		.escr_emask	=
-		P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS),
+			P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS),
 		.cntr		= { {12, 13, 16}, {14, 15, 17} },
 	},
 	[P4_EVENT_X87_ASSIST] = {
@@ -912,8 +912,7 @@ static int p4_pmu_handle_irq(struct pt_regs *regs)
 	int idx, handled = 0;
 	u64 val;
 
-	data.addr = 0;
-	data.raw = NULL;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -947,14 +946,23 @@ static int p4_pmu_handle_irq(struct pt_regs *regs)
 		if (!x86_perf_event_set_period(event))
 			continue;
 		if (perf_event_overflow(event, 1, &data, regs))
-			p4_pmu_disable_event(event);
+			x86_pmu_stop(event, 0);
 	}
 
-	if (handled) {
-		/* p4 quirk: unmask it again */
-		apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
+	if (handled)
 		inc_irq_stat(apic_perf_irqs);
-	}
+
+	/*
+	 * When dealing with the unmasking of the LVTPC on P4 perf hw, it has
+	 * been observed that the OVF bit flag has to be cleared first _before_
+	 * the LVTPC can be unmasked.
+	 *
+	 * The reason is the NMI line will continue to be asserted while the OVF
+	 * bit is set.  This causes a second NMI to generate if the LVTPC is
+	 * unmasked before the OVF bit is cleared, leading to unknown NMI
+	 * messages.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
 
 	return handled;
 }
@@ -1188,7 +1196,7 @@ static __init int p4_pmu_init(void)
 {
 	unsigned int low, high;
 
-	/* If we get stripped -- indexig fails */
+	/* If we get stripped -- indexing fails */
 	BUILD_BUG_ON(ARCH_P4_MAX_CCCR > X86_PMC_MAX_GENERIC);
 
 	rdmsr(MSR_IA32_MISC_ENABLE, low, high);
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 706a9fb46a5..e90f08458e6 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -391,7 +391,7 @@ static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize,
 
 	set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity);
 
-	return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr);
+	return io_apic_setup_irq_pin_once(*out_hwirq, cpu_to_node(0), &attr);
 }
 
 static void __init ioapic_add_ofnode(struct device_node *np)
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index e2a3f0606da..1aae78f775f 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -135,20 +135,6 @@ print_context_stack_bp(struct thread_info *tinfo,
 }
 EXPORT_SYMBOL_GPL(print_context_stack_bp);
 
-
-static void
-print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-	printk(data);
-	print_symbol(msg, symbol);
-	printk("\n");
-}
-
-static void print_trace_warning(void *data, char *msg)
-{
-	printk("%s%s\n", (char *)data, msg);
-}
-
 static int print_trace_stack(void *data, char *name)
 {
 	printk("%s <%s> ", (char *)data, name);
@@ -166,8 +152,6 @@ static void print_trace_address(void *data, unsigned long addr, int reliable)
 }
 
 static const struct stacktrace_ops print_trace_ops = {
-	.warning		= print_trace_warning,
-	.warning_symbol		= print_trace_warning_symbol,
 	.stack			= print_trace_stack,
 	.address		= print_trace_address,
 	.walk_stack		= print_context_stack,
@@ -279,7 +263,6 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 	printk("DEBUG_PAGEALLOC");
 #endif
 	printk("\n");
-	sysfs_printk_last_file();
 	if (notify_die(DIE_OOPS, str, regs, err,
 			current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
 		return 1;
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index a93742a5746..0ba15a6cc57 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -260,9 +260,9 @@ do_ftrace_mod_code(unsigned long ip, void *new_code)
 	return mod_code_status;
 }
 
-static unsigned char *ftrace_nop_replace(void)
+static const unsigned char *ftrace_nop_replace(void)
 {
-	return ideal_nop5;
+	return ideal_nops[NOP_ATOMIC5];
 }
 
 static int
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index d6d6bb36193..3bb08509a7a 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -23,7 +23,6 @@
 static void __init i386_default_early_setup(void)
 {
 	/* Initialize 32bit specific setup functions */
-	x86_init.resources.probe_roms = probe_roms;
 	x86_init.resources.reserve_resources = i386_reserve_resources;
 	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
 
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index bfe8f729e08..6781765b3a0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -217,7 +217,7 @@ static void hpet_reserve_platform_timers(unsigned int id) { }
 /*
  * Common hpet info
  */
-static unsigned long hpet_period;
+static unsigned long hpet_freq;
 
 static void hpet_legacy_set_mode(enum clock_event_mode mode,
 			  struct clock_event_device *evt);
@@ -232,7 +232,6 @@ static struct clock_event_device hpet_clockevent = {
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= hpet_legacy_set_mode,
 	.set_next_event = hpet_legacy_next_event,
-	.shift		= 32,
 	.irq		= 0,
 	.rating		= 50,
 };
@@ -290,28 +289,12 @@ static void hpet_legacy_clockevent_register(void)
 	hpet_enable_legacy_int();
 
 	/*
-	 * The mult factor is defined as (include/linux/clockchips.h)
-	 *  mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h)
-	 * hpet_period is in units of femtoseconds (per cycle), so
-	 *  mult/2^shift = cyc/ns = 10^6/hpet_period
-	 *  mult = (10^6 * 2^shift)/hpet_period
-	 *  mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period
-	 */
-	hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC,
-				      hpet_period, hpet_clockevent.shift);
-	/* Calculate the min / max delta */
-	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
-							   &hpet_clockevent);
-	/* Setup minimum reprogramming delta. */
-	hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
-							   &hpet_clockevent);
-
-	/*
 	 * Start hpet with the boot cpu mask and make it
 	 * global after the IO_APIC has been initialized.
 	 */
 	hpet_clockevent.cpumask = cpumask_of(smp_processor_id());
-	clockevents_register_device(&hpet_clockevent);
+	clockevents_config_and_register(&hpet_clockevent, hpet_freq,
+					HPET_MIN_PROG_DELTA, 0x7FFFFFFF);
 	global_clock_event = &hpet_clockevent;
 	printk(KERN_DEBUG "hpet clockevent registered\n");
 }
@@ -549,7 +532,6 @@ static int hpet_setup_irq(struct hpet_dev *dev)
 static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
 {
 	struct clock_event_device *evt = &hdev->evt;
-	uint64_t hpet_freq;
 
 	WARN_ON(cpu != smp_processor_id());
 	if (!(hdev->flags & HPET_DEV_VALID))
@@ -571,24 +553,10 @@ static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
 
 	evt->set_mode = hpet_msi_set_mode;
 	evt->set_next_event = hpet_msi_next_event;
-	evt->shift = 32;
-
-	/*
-	 * The period is a femto seconds value. We need to calculate the
-	 * scaled math multiplication factor for nanosecond to hpet tick
-	 * conversion.
-	 */
-	hpet_freq = FSEC_PER_SEC;
-	do_div(hpet_freq, hpet_period);
-	evt->mult = div_sc((unsigned long) hpet_freq,
-				      NSEC_PER_SEC, evt->shift);
-	/* Calculate the max delta */
-	evt->max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, evt);
-	/* 5 usec minimum reprogramming delta. */
-	evt->min_delta_ns = 5000;
-
 	evt->cpumask = cpumask_of(hdev->cpu);
-	clockevents_register_device(evt);
+
+	clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA,
+					0x7FFFFFFF);
 }
 
 #ifdef CONFIG_HPET
@@ -792,7 +760,6 @@ static struct clocksource clocksource_hpet = {
 static int hpet_clocksource_register(void)
 {
 	u64 start, now;
-	u64 hpet_freq;
 	cycle_t t1;
 
 	/* Start the counter */
@@ -819,24 +786,7 @@ static int hpet_clocksource_register(void)
 		return -ENODEV;
 	}
 
-	/*
-	 * The definition of mult is (include/linux/clocksource.h)
-	 * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc
-	 * so we first need to convert hpet_period to ns/cyc units:
-	 *  mult/2^shift = ns/cyc = hpet_period/10^6
-	 *  mult = (hpet_period * 2^shift)/10^6
-	 *  mult = (hpet_period << shift)/FSEC_PER_NSEC
-	 */
-
-	/* Need to convert hpet_period (fsec/cyc) to cyc/sec:
-	 *
-	 * cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc)
-	 * cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period
-	 */
-	hpet_freq = FSEC_PER_SEC;
-	do_div(hpet_freq, hpet_period);
 	clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
-
 	return 0;
 }
 
@@ -845,7 +795,9 @@ static int hpet_clocksource_register(void)
  */
 int __init hpet_enable(void)
 {
+	unsigned long hpet_period;
 	unsigned int id;
+	u64 freq;
 	int i;
 
 	if (!is_hpet_capable())
@@ -884,6 +836,14 @@ int __init hpet_enable(void)
 		goto out_nohpet;
 
 	/*
+	 * The period is a femto seconds value. Convert it to a
+	 * frequency.
+	 */
+	freq = FSEC_PER_SEC;
+	do_div(freq, hpet_period);
+	hpet_freq = freq;
+
+	/*
 	 * Read the HPET ID register to retrieve the IRQ routing
 	 * information and the number of channels
 	 */
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 2dfd3159744..fb66dc9e36c 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -93,7 +93,6 @@ static struct clock_event_device pit_ce = {
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= init_pit_timer,
 	.set_next_event = pit_next_event,
-	.shift		= 32,
 	.irq		= 0,
 };
 
@@ -108,90 +107,12 @@ void __init setup_pit_timer(void)
 	 * IO_APIC has been initialized.
 	 */
 	pit_ce.cpumask = cpumask_of(smp_processor_id());
-	pit_ce.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, pit_ce.shift);
-	pit_ce.max_delta_ns = clockevent_delta2ns(0x7FFF, &pit_ce);
-	pit_ce.min_delta_ns = clockevent_delta2ns(0xF, &pit_ce);
 
-	clockevents_register_device(&pit_ce);
+	clockevents_config_and_register(&pit_ce, CLOCK_TICK_RATE, 0xF, 0x7FFF);
 	global_clock_event = &pit_ce;
 }
 
 #ifndef CONFIG_X86_64
-/*
- * Since the PIT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t pit_read(struct clocksource *cs)
-{
-	static int old_count;
-	static u32 old_jifs;
-	unsigned long flags;
-	int count;
-	u32 jifs;
-
-	raw_spin_lock_irqsave(&i8253_lock, flags);
-	/*
-	 * Although our caller may have the read side of xtime_lock,
-	 * this is now a seqlock, and we are cheating in this routine
-	 * by having side effects on state that we cannot undo if
-	 * there is a collision on the seqlock and our caller has to
-	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
-	 * jiffies as volatile despite the lock.  We read jiffies
-	 * before latching the timer count to guarantee that although
-	 * the jiffies value might be older than the count (that is,
-	 * the counter may underflow between the last point where
-	 * jiffies was incremented and the point where we latch the
-	 * count), it cannot be newer.
-	 */
-	jifs = jiffies;
-	outb_pit(0x00, PIT_MODE);	/* latch the count ASAP */
-	count = inb_pit(PIT_CH0);	/* read the latched count */
-	count |= inb_pit(PIT_CH0) << 8;
-
-	/* VIA686a test code... reset the latch if count > max + 1 */
-	if (count > LATCH) {
-		outb_pit(0x34, PIT_MODE);
-		outb_pit(LATCH & 0xff, PIT_CH0);
-		outb_pit(LATCH >> 8, PIT_CH0);
-		count = LATCH - 1;
-	}
-
-	/*
-	 * It's possible for count to appear to go the wrong way for a
-	 * couple of reasons:
-	 *
-	 *  1. The timer counter underflows, but we haven't handled the
-	 *     resulting interrupt and incremented jiffies yet.
-	 *  2. Hardware problem with the timer, not giving us continuous time,
-	 *     the counter does small "jumps" upwards on some Pentium systems,
-	 *     (see c't 95/10 page 335 for Neptun bug.)
-	 *
-	 * Previous attempts to handle these cases intelligently were
-	 * buggy, so we just do the simple thing now.
-	 */
-	if (count > old_count && jifs == old_jifs)
-		count = old_count;
-
-	old_count = count;
-	old_jifs = jifs;
-
-	raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
-	count = (LATCH - 1) - count;
-
-	return (cycle_t)(jifs * LATCH) + count;
-}
-
-static struct clocksource pit_cs = {
-	.name		= "pit",
-	.rating		= 110,
-	.read		= pit_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.mult		= 0,
-	.shift		= 20,
-};
-
 static int __init init_pit_clocksource(void)
 {
 	 /*
@@ -205,10 +126,7 @@ static int __init init_pit_clocksource(void)
 	    pit_ce.mode != CLOCK_EVT_MODE_PERIODIC)
 		return 0;
 
-	pit_cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE, pit_cs.shift);
-
-	return clocksource_register(&pit_cs);
+	return clocksource_i8253_init();
 }
 arch_initcall(init_pit_clocksource);
-
 #endif /* !CONFIG_X86_64 */
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 948a31eae75..6c0802eb2f7 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -8,6 +8,7 @@
 #include <linux/seq_file.h>
 #include <linux/smp.h>
 #include <linux/ftrace.h>
+#include <linux/delay.h>
 
 #include <asm/apic.h>
 #include <asm/io_apic.h>
@@ -248,7 +249,7 @@ void fixup_irqs(void)
 
 		data = irq_desc_get_irq_data(desc);
 		affinity = data->affinity;
-		if (!irq_has_action(irq) ||
+		if (!irq_has_action(irq) || irqd_is_per_cpu(data) ||
 		    cpumask_subset(affinity, cpu_online_mask)) {
 			raw_spin_unlock(&desc->lock);
 			continue;
@@ -275,7 +276,8 @@ void fixup_irqs(void)
 		else if (!(warned++))
 			set_affinity = 0;
 
-		if (!irqd_can_move_in_process_context(data) && chip->irq_unmask)
+		if (!irqd_can_move_in_process_context(data) &&
+		    !irqd_irq_disabled(data) && chip->irq_unmask)
 			chip->irq_unmask(data);
 
 		raw_spin_unlock(&desc->lock);
diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index 961b6b30ba9..3fee346ef54 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -34,7 +34,7 @@ void arch_jump_label_transform(struct jump_entry *entry,
 		code.offset = entry->target -
 				(entry->code + JUMP_LABEL_NOP_SIZE);
 	} else
-		memcpy(&code, ideal_nop5, JUMP_LABEL_NOP_SIZE);
+		memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE);
 	get_online_cpus();
 	mutex_lock(&text_mutex);
 	text_poke_smp((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
@@ -44,7 +44,8 @@ void arch_jump_label_transform(struct jump_entry *entry,
 
 void arch_jump_label_text_poke_early(jump_label_t addr)
 {
-	text_poke_early((void *)addr, ideal_nop5, JUMP_LABEL_NOP_SIZE);
+	text_poke_early((void *)addr, ideal_nops[NOP_ATOMIC5],
+			JUMP_LABEL_NOP_SIZE);
 }
 
 #endif
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index c969fd9d156..f1a6244d7d9 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -1183,12 +1183,13 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op,
 					 struct pt_regs *regs)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	unsigned long flags;
 
 	/* This is possible if op is under delayed unoptimizing */
 	if (kprobe_disabled(&op->kp))
 		return;
 
-	preempt_disable();
+	local_irq_save(flags);
 	if (kprobe_running()) {
 		kprobes_inc_nmissed_count(&op->kp);
 	} else {
@@ -1207,7 +1208,7 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op,
 		opt_pre_handler(&op->kp, regs);
 		__this_cpu_write(current_kprobe, NULL);
 	}
-	preempt_enable_no_resched();
+	local_irq_restore(flags);
 }
 
 static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src)
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index f98d3eafe07..6389a6bca11 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -26,8 +26,6 @@
 #include <asm/x86_init.h>
 #include <asm/reboot.h>
 
-#define KVM_SCALE 22
-
 static int kvmclock = 1;
 static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
 static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
@@ -120,8 +118,6 @@ static struct clocksource kvm_clock = {
 	.read = kvm_clock_get_cycles,
 	.rating = 400,
 	.mask = CLOCKSOURCE_MASK(64),
-	.mult = 1 << KVM_SCALE,
-	.shift = KVM_SCALE,
 	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -203,7 +199,7 @@ void __init kvmclock_init(void)
 	machine_ops.crash_shutdown  = kvm_crash_shutdown;
 #endif
 	kvm_get_preset_lpj();
-	clocksource_register(&kvm_clock);
+	clocksource_register_hz(&kvm_clock, NSEC_PER_SEC);
 	pv_info.paravirt_enabled = 1;
 	pv_info.name = "KVM";
 
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 5ed0ab549eb..f9242800bc8 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -550,6 +550,7 @@ static void __exit microcode_exit(void)
 	microcode_dev_exit();
 
 	unregister_hotcpu_notifier(&mc_cpu_notifier);
+	unregister_syscore_ops(&mc_syscore_ops);
 
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index ab23f1ad4bf..52f256f2cc8 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -24,6 +24,7 @@
 #include <linux/bug.h>
 #include <linux/mm.h>
 #include <linux/gfp.h>
+#include <linux/jump_label.h>
 
 #include <asm/system.h>
 #include <asm/page.h>
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 5a532ce646b..6f9bfffb272 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -715,17 +715,15 @@ static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
 	}
 }
 
-static int
+static int __init
 check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
 {
-	int ret = 0;
-
 	if (!mpc_new_phys || count <= mpc_new_length) {
 		WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
 		return -1;
 	}
 
-	return ret;
+	return 0;
 }
 #else /* CONFIG_X86_IO_APIC */
 static
diff --git a/arch/x86/kernel/pci-iommu_table.c b/arch/x86/kernel/pci-iommu_table.c
index 55d745ec118..35ccf75696e 100644
--- a/arch/x86/kernel/pci-iommu_table.c
+++ b/arch/x86/kernel/pci-iommu_table.c
@@ -50,20 +50,14 @@ void __init check_iommu_entries(struct iommu_table_entry *start,
 				struct iommu_table_entry *finish)
 {
 	struct iommu_table_entry *p, *q, *x;
-	char sym_p[KSYM_SYMBOL_LEN];
-	char sym_q[KSYM_SYMBOL_LEN];
 
 	/* Simple cyclic dependency checker. */
 	for (p = start; p < finish; p++) {
 		q = find_dependents_of(start, finish, p);
 		x = find_dependents_of(start, finish, q);
 		if (p == x) {
-			sprint_symbol(sym_p, (unsigned long)p->detect);
-			sprint_symbol(sym_q, (unsigned long)q->detect);
-
-			printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %s depends" \
-					" on %s and vice-versa. BREAKING IT.\n",
-					sym_p, sym_q);
+			printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %pS depends on %pS and vice-versa. BREAKING IT.\n",
+			       p->detect, q->detect);
 			/* Heavy handed way..*/
 			x->depend = 0;
 		}
@@ -72,12 +66,8 @@ void __init check_iommu_entries(struct iommu_table_entry *start,
 	for (p = start; p < finish; p++) {
 		q = find_dependents_of(p, finish, p);
 		if (q && q > p) {
-			sprint_symbol(sym_p, (unsigned long)p->detect);
-			sprint_symbol(sym_q, (unsigned long)q->detect);
-
-			printk(KERN_ERR "EXECUTION ORDER INVALID! %s "\
-					"should be called before %s!\n",
-					sym_p, sym_q);
+			printk(KERN_ERR "EXECUTION ORDER INVALID! %pS should be called before %pS!\n",
+			       p->detect, q->detect);
 		}
 	}
 }
diff --git a/arch/x86/kernel/probe_roms_32.c b/arch/x86/kernel/probe_roms.c
index 071e7fea42e..ba0a4cce53b 100644
--- a/arch/x86/kernel/probe_roms_32.c
+++ b/arch/x86/kernel/probe_roms.c
@@ -73,6 +73,107 @@ static struct resource video_rom_resource = {
 	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
 };
 
+/* does this oprom support the given pci device, or any of the devices
+ * that the driver supports?
+ */
+static bool match_id(struct pci_dev *pdev, unsigned short vendor, unsigned short device)
+{
+	struct pci_driver *drv = pdev->driver;
+	const struct pci_device_id *id;
+
+	if (pdev->vendor == vendor && pdev->device == device)
+		return true;
+
+	for (id = drv ? drv->id_table : NULL; id && id->vendor; id++)
+		if (id->vendor == vendor && id->device == device)
+			break;
+
+	return id && id->vendor;
+}
+
+static bool probe_list(struct pci_dev *pdev, unsigned short vendor,
+		       const unsigned char *rom_list)
+{
+	unsigned short device;
+
+	do {
+		if (probe_kernel_address(rom_list, device) != 0)
+			device = 0;
+
+		if (device && match_id(pdev, vendor, device))
+			break;
+
+		rom_list += 2;
+	} while (device);
+
+	return !!device;
+}
+
+static struct resource *find_oprom(struct pci_dev *pdev)
+{
+	struct resource *oprom = NULL;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(adapter_rom_resources); i++) {
+		struct resource *res = &adapter_rom_resources[i];
+		unsigned short offset, vendor, device, list, rev;
+		const unsigned char *rom;
+
+		if (res->end == 0)
+			break;
+
+		rom = isa_bus_to_virt(res->start);
+		if (probe_kernel_address(rom + 0x18, offset) != 0)
+			continue;
+
+		if (probe_kernel_address(rom + offset + 0x4, vendor) != 0)
+			continue;
+
+		if (probe_kernel_address(rom + offset + 0x6, device) != 0)
+			continue;
+
+		if (match_id(pdev, vendor, device)) {
+			oprom = res;
+			break;
+		}
+
+		if (probe_kernel_address(rom + offset + 0x8, list) == 0 &&
+		    probe_kernel_address(rom + offset + 0xc, rev) == 0 &&
+		    rev >= 3 && list &&
+		    probe_list(pdev, vendor, rom + offset + list)) {
+			oprom = res;
+			break;
+		}
+	}
+
+	return oprom;
+}
+
+void *pci_map_biosrom(struct pci_dev *pdev)
+{
+	struct resource *oprom = find_oprom(pdev);
+
+	if (!oprom)
+		return NULL;
+
+	return ioremap(oprom->start, resource_size(oprom));
+}
+EXPORT_SYMBOL(pci_map_biosrom);
+
+void pci_unmap_biosrom(void __iomem *image)
+{
+	iounmap(image);
+}
+EXPORT_SYMBOL(pci_unmap_biosrom);
+
+size_t pci_biosrom_size(struct pci_dev *pdev)
+{
+	struct resource *oprom = find_oprom(pdev);
+
+	return oprom ? resource_size(oprom) : 0;
+}
+EXPORT_SYMBOL(pci_biosrom_size);
+
 #define ROMSIGNATURE 0xaa55
 
 static int __init romsignature(const unsigned char *rom)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index d46cbe46b7a..88a90a977f8 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -449,7 +449,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait);
 void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 {
 	if (!need_resched()) {
-		if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR))
+		if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
 
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
@@ -465,7 +465,7 @@ static void mwait_idle(void)
 	if (!need_resched()) {
 		trace_power_start(POWER_CSTATE, 1, smp_processor_id());
 		trace_cpu_idle(1, smp_processor_id());
-		if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR))
+		if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
 
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 45892dc4b72..f65e5b521db 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -608,6 +608,9 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 	unsigned len, type;
 	struct perf_event *bp;
 
+	if (ptrace_get_breakpoints(tsk) < 0)
+		return -ESRCH;
+
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
 restore:
@@ -655,6 +658,9 @@ restore:
 		}
 		goto restore;
 	}
+
+	ptrace_put_breakpoints(tsk);
+
 	return ((orig_ret < 0) ? orig_ret : rc);
 }
 
@@ -668,10 +674,17 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 
 	if (n < HBP_NUM) {
 		struct perf_event *bp;
+
+		if (ptrace_get_breakpoints(tsk) < 0)
+			return -ESRCH;
+
 		bp = thread->ptrace_bps[n];
 		if (!bp)
-			return 0;
-		val = bp->hw.info.address;
+			val = 0;
+		else
+			val = bp->hw.info.address;
+
+		ptrace_put_breakpoints(tsk);
 	} else if (n == 6) {
 		val = thread->debugreg6;
 	 } else if (n == 7) {
@@ -686,6 +699,10 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 	struct perf_event *bp;
 	struct thread_struct *t = &tsk->thread;
 	struct perf_event_attr attr;
+	int err = 0;
+
+	if (ptrace_get_breakpoints(tsk) < 0)
+		return -ESRCH;
 
 	if (!t->ptrace_bps[nr]) {
 		ptrace_breakpoint_init(&attr);
@@ -709,24 +726,23 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		 * writing for the user. And anyway this is the previous
 		 * behaviour.
 		 */
-		if (IS_ERR(bp))
-			return PTR_ERR(bp);
+		if (IS_ERR(bp)) {
+			err = PTR_ERR(bp);
+			goto put;
+		}
 
 		t->ptrace_bps[nr] = bp;
 	} else {
-		int err;
-
 		bp = t->ptrace_bps[nr];
 
 		attr = bp->attr;
 		attr.bp_addr = addr;
 		err = modify_user_hw_breakpoint(bp, &attr);
-		if (err)
-			return err;
 	}
 
-
-	return 0;
+put:
+	ptrace_put_breakpoints(tsk);
+	return err;
 }
 
 /*
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d3ce37edb54..0c016f72769 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -6,6 +6,7 @@
 #include <linux/dmi.h>
 #include <linux/sched.h>
 #include <linux/tboot.h>
+#include <linux/delay.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
 #include <asm/apic.h>
@@ -35,7 +36,7 @@ EXPORT_SYMBOL(pm_power_off);
 
 static const struct desc_ptr no_idt = {};
 static int reboot_mode;
-enum reboot_type reboot_type = BOOT_KBD;
+enum reboot_type reboot_type = BOOT_ACPI;
 int reboot_force;
 
 #if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
@@ -477,9 +478,24 @@ void __attribute__((weak)) mach_reboot_fixups(void)
 {
 }
 
+/*
+ * Windows compatible x86 hardware expects the following on reboot:
+ *
+ * 1) If the FADT has the ACPI reboot register flag set, try it
+ * 2) If still alive, write to the keyboard controller
+ * 3) If still alive, write to the ACPI reboot register again
+ * 4) If still alive, write to the keyboard controller again
+ *
+ * If the machine is still alive at this stage, it gives up. We default to
+ * following the same pattern, except that if we're still alive after (4) we'll
+ * try to force a triple fault and then cycle between hitting the keyboard
+ * controller and doing that
+ */
 static void native_machine_emergency_restart(void)
 {
 	int i;
+	int attempt = 0;
+	int orig_reboot_type = reboot_type;
 
 	if (reboot_emergency)
 		emergency_vmx_disable_all();
@@ -501,6 +517,13 @@ static void native_machine_emergency_restart(void)
 				outb(0xfe, 0x64); /* pulse reset low */
 				udelay(50);
 			}
+			if (attempt == 0 && orig_reboot_type == BOOT_ACPI) {
+				attempt = 1;
+				reboot_type = BOOT_ACPI;
+			} else {
+				reboot_type = BOOT_TRIPLE;
+			}
+			break;
 
 		case BOOT_TRIPLE:
 			load_idt(&no_idt);
diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S
index 29092b38d81..1d5c46df0d7 100644
--- a/arch/x86/kernel/reboot_32.S
+++ b/arch/x86/kernel/reboot_32.S
@@ -21,26 +21,26 @@ r_base = .
 	/* Get our own relocated address */
 	call	1f
 1:	popl	%ebx
-	subl	$1b, %ebx
+	subl	$(1b - r_base), %ebx
 
 	/* Compute the equivalent real-mode segment */
 	movl	%ebx, %ecx
 	shrl	$4, %ecx
 	
 	/* Patch post-real-mode segment jump */
-	movw	dispatch_table(%ebx,%eax,2),%ax
-	movw	%ax, 101f(%ebx)
-	movw	%cx, 102f(%ebx)
+	movw	(dispatch_table - r_base)(%ebx,%eax,2),%ax
+	movw	%ax, (101f - r_base)(%ebx)
+	movw	%cx, (102f - r_base)(%ebx)
 
 	/* Set up the IDT for real mode. */
-	lidtl	machine_real_restart_idt(%ebx)
+	lidtl	(machine_real_restart_idt - r_base)(%ebx)
 
 	/*
 	 * Set up a GDT from which we can load segment descriptors for real
 	 * mode.  The GDT is not used in real mode; it is just needed here to
 	 * prepare the descriptors.
 	 */
-	lgdtl	machine_real_restart_gdt(%ebx)
+	lgdtl	(machine_real_restart_gdt - r_base)(%ebx)
 
 	/*
 	 * Load the data segment registers with 16-bit compatible values
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 5a0484a95ad..c3050af9306 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -691,8 +691,6 @@ early_param("reservelow", parse_reservelow);
 
 void __init setup_arch(char **cmdline_p)
 {
-	unsigned long flags;
-
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
@@ -976,6 +974,11 @@ void __init setup_arch(char **cmdline_p)
 	paging_init();
 	x86_init.paging.pagetable_setup_done(swapper_pg_dir);
 
+	if (boot_cpu_data.cpuid_level >= 0) {
+		/* A CPU has %cr4 if and only if it has CPUID */
+		mmu_cr4_features = read_cr4();
+	}
+
 #ifdef CONFIG_X86_32
 	/* sync back kernel address range */
 	clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
@@ -1036,9 +1039,7 @@ void __init setup_arch(char **cmdline_p)
 
 	mcheck_init();
 
-	local_irq_save(flags);
-	arch_init_ideal_nop5();
-	local_irq_restore(flags);
+	arch_init_ideal_nops();
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 4fd173cd8e5..40a24932a8a 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -601,10 +601,7 @@ long sys_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
 		goto badframe;
@@ -682,6 +679,7 @@ static int
 handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	      sigset_t *oldset, struct pt_regs *regs)
 {
+	sigset_t blocked;
 	int ret;
 
 	/* Are we from a system call? */
@@ -741,12 +739,10 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	 */
 	regs->flags &= ~X86_EFLAGS_TF;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
+	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
 	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+		sigaddset(&blocked, sig);
+	set_current_blocked(&blocked);
 
 	tracehook_signal_handler(sig, info, ka, regs,
 				 test_thread_flag(TIF_SINGLESTEP));
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 513deac7228..013e7eba83b 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -194,14 +194,13 @@ static void native_stop_other_cpus(int wait)
 }
 
 /*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
+ * Reschedule call back.
  */
 void smp_reschedule_interrupt(struct pt_regs *regs)
 {
 	ack_APIC_irq();
 	inc_irq_stat(irq_resched_count);
+	scheduler_ipi();
 	/*
 	 * KVM uses this interrupt to force a cpu out of guest mode
 	 */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index c2871d3c71b..a3c430bdfb6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1332,9 +1332,9 @@ static inline void mwait_play_dead(void)
 	void *mwait_ptr;
 	struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info);
 
-	if (!(cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)))
+	if (!this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c))
 		return;
-	if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLSH))
+	if (!this_cpu_has(X86_FEATURE_CLFLSH))
 		return;
 	if (__this_cpu_read(cpu_info.cpuid_level) < CPUID_MWAIT_LEAF)
 		return;
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 6515733a289..55d9bc03f69 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -9,15 +9,6 @@
 #include <linux/uaccess.h>
 #include <asm/stacktrace.h>
 
-static void save_stack_warning(void *data, char *msg)
-{
-}
-
-static void
-save_stack_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-}
-
 static int save_stack_stack(void *data, char *name)
 {
 	return 0;
@@ -53,16 +44,12 @@ save_stack_address_nosched(void *data, unsigned long addr, int reliable)
 }
 
 static const struct stacktrace_ops save_stack_ops = {
-	.warning	= save_stack_warning,
-	.warning_symbol	= save_stack_warning_symbol,
 	.stack		= save_stack_stack,
 	.address	= save_stack_address,
 	.walk_stack	= print_context_stack,
 };
 
 static const struct stacktrace_ops save_stack_ops_nosched = {
-	.warning	= save_stack_warning,
-	.warning_symbol	= save_stack_warning_symbol,
 	.stack		= save_stack_stack,
 	.address	= save_stack_address_nosched,
 	.walk_stack	= print_context_stack,
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index abce34d5c79..32cbffb0c49 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -344,3 +344,4 @@ ENTRY(sys_call_table)
 	.long sys_open_by_handle_at
 	.long sys_clock_adjtime
 	.long sys_syncfs
+	.long sys_sendmmsg		/* 345 */
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index c11514e9128..6f164bd5e14 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -35,7 +35,7 @@ void iommu_shutdown_noop(void) { }
 struct x86_init_ops x86_init __initdata = {
 
 	.resources = {
-		.probe_roms		= x86_init_noop,
+		.probe_roms		= probe_roms,
 		.reserve_resources	= reserve_standard_io_resources,
 		.memory_setup		= default_machine_specific_memory_setup,
 	},
@@ -61,6 +61,10 @@ struct x86_init_ops x86_init __initdata = {
 		.banner			= default_banner,
 	},
 
+	.mapping = {
+		.pagetable_reserve		= native_pagetable_reserve,
+	},
+
 	.paging = {
 		.pagetable_setup_start	= native_pagetable_setup_start,
 		.pagetable_setup_done	= native_pagetable_setup_done,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 58f517b5964..934b4c6b0bf 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2395,9 +2395,9 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		int i;
 
 		entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
-		for (i = 1; *nent < maxnent; ++i) {
-			if (entry[i - 1].eax == 0 && i != 2)
-				break;
+		for (i = 1; *nent < maxnent && i < 64; ++i) {
+			if (entry[i].eax == 0)
+				continue;
 			do_cpuid_1_ent(&entry[i], function, i);
 			entry[i].flags |=
 			       KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
@@ -4958,12 +4958,6 @@ struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
 			best = e;
 			break;
 		}
-		/*
-		 * Both basic or both extended?
-		 */
-		if (((e->function ^ function) & 0x80000000) == 0)
-			if (!best || e->function > best->function)
-				best = e;
 	}
 	return best;
 }
@@ -4983,6 +4977,27 @@ not_found:
 	return 36;
 }
 
+/*
+ * If no match is found, check whether we exceed the vCPU's limit
+ * and return the content of the highest valid _standard_ leaf instead.
+ * This is to satisfy the CPUID specification.
+ */
+static struct kvm_cpuid_entry2* check_cpuid_limit(struct kvm_vcpu *vcpu,
+                                                  u32 function, u32 index)
+{
+	struct kvm_cpuid_entry2 *maxlevel;
+
+	maxlevel = kvm_find_cpuid_entry(vcpu, function & 0x80000000, 0);
+	if (!maxlevel || maxlevel->eax >= function)
+		return NULL;
+	if (function & 0x80000000) {
+		maxlevel = kvm_find_cpuid_entry(vcpu, 0, 0);
+		if (!maxlevel)
+			return NULL;
+	}
+	return kvm_find_cpuid_entry(vcpu, maxlevel->eax, index);
+}
+
 void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
 {
 	u32 function, index;
@@ -4995,6 +5010,10 @@ void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
 	kvm_register_write(vcpu, VCPU_REGS_RCX, 0);
 	kvm_register_write(vcpu, VCPU_REGS_RDX, 0);
 	best = kvm_find_cpuid_entry(vcpu, function, index);
+
+	if (!best)
+		best = check_cpuid_limit(vcpu, function, index);
+
 	if (best) {
 		kvm_register_write(vcpu, VCPU_REGS_RAX, best->eax);
 		kvm_register_write(vcpu, VCPU_REGS_RBX, best->ebx);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 1cd608973ce..e191c096ab9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -7,7 +7,7 @@
  * kernel and insert a module (lg.ko) which allows us to run other Linux
  * kernels the same way we'd run processes.  We call the first kernel the Host,
  * and the others the Guests.  The program which sets up and configures Guests
- * (such as the example in Documentation/lguest/lguest.c) is called the
+ * (such as the example in Documentation/virtual/lguest/lguest.c) is called the
  * Launcher.
  *
  * Secondly, we only run specially modified Guests, not normal kernels: setting
@@ -913,8 +913,6 @@ static struct clocksource lguest_clock = {
 	.rating		= 200,
 	.read		= lguest_clock_read,
 	.mask		= CLOCKSOURCE_MASK(64),
-	.mult		= 1 << 22,
-	.shift		= 22,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -997,7 +995,7 @@ static void lguest_time_init(void)
 	/* Set up the timer interrupt (0) to go to our simple timer routine */
 	irq_set_handler(0, lguest_time_irq);
 
-	clocksource_register(&lguest_clock);
+	clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);
 
 	/* We can't set cpumask in the initializer: damn C limitations!  Set it
 	 * here and register our timer device. */
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index aa4326bfb24..f2145cfa12a 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -1,5 +1,6 @@
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
+#include <asm/alternative-asm.h>
 
 /*
  * Zero a page. 	
@@ -14,6 +15,15 @@ ENTRY(clear_page_c)
 	CFI_ENDPROC
 ENDPROC(clear_page_c)
 
+ENTRY(clear_page_c_e)
+	CFI_STARTPROC
+	movl $4096,%ecx
+	xorl %eax,%eax
+	rep stosb
+	ret
+	CFI_ENDPROC
+ENDPROC(clear_page_c_e)
+
 ENTRY(clear_page)
 	CFI_STARTPROC
 	xorl   %eax,%eax
@@ -38,21 +48,26 @@ ENTRY(clear_page)
 .Lclear_page_end:
 ENDPROC(clear_page)
 
-	/* Some CPUs run faster using the string instructions.
-	   It is also a lot simpler. Use this when possible */
+	/*
+	 * Some CPUs support enhanced REP MOVSB/STOSB instructions.
+	 * It is recommended to use this when possible.
+	 * If enhanced REP MOVSB/STOSB is not available, try to use fast string.
+	 * Otherwise, use original function.
+	 *
+	 */
 
 #include <asm/cpufeature.h>
 
 	.section .altinstr_replacement,"ax"
 1:	.byte 0xeb					/* jmp <disp8> */
 	.byte (clear_page_c - clear_page) - (2f - 1b)	/* offset */
-2:
+2:	.byte 0xeb					/* jmp <disp8> */
+	.byte (clear_page_c_e - clear_page) - (3f - 2b)	/* offset */
+3:
 	.previous
 	.section .altinstructions,"a"
-	.align 8
-	.quad clear_page
-	.quad 1b
-	.word X86_FEATURE_REP_GOOD
-	.byte .Lclear_page_end - clear_page
-	.byte 2b - 1b
+	altinstruction_entry clear_page,1b,X86_FEATURE_REP_GOOD,\
+			     .Lclear_page_end-clear_page, 2b-1b
+	altinstruction_entry clear_page,2b,X86_FEATURE_ERMS,   \
+			     .Lclear_page_end-clear_page,3b-2b
 	.previous
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 99e48261519..024840266ba 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -15,23 +15,30 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
 
-	.macro ALTERNATIVE_JUMP feature,orig,alt
+/*
+ * By placing feature2 after feature1 in altinstructions section, we logically
+ * implement:
+ * If CPU has feature2, jmp to alt2 is used
+ * else if CPU has feature1, jmp to alt1 is used
+ * else jmp to orig is used.
+ */
+	.macro ALTERNATIVE_JUMP feature1,feature2,orig,alt1,alt2
 0:
 	.byte 0xe9	/* 32bit jump */
 	.long \orig-1f	/* by default jump to orig */
 1:
 	.section .altinstr_replacement,"ax"
 2:	.byte 0xe9			/* near jump with 32bit immediate */
-	.long \alt-1b /* offset */   /* or alternatively to alt */
+	.long \alt1-1b /* offset */   /* or alternatively to alt1 */
+3:	.byte 0xe9			/* near jump with 32bit immediate */
+	.long \alt2-1b /* offset */   /* or alternatively to alt2 */
 	.previous
+
 	.section .altinstructions,"a"
-	.align 8
-	.quad  0b
-	.quad  2b
-	.word  \feature			/* when feature is set */
-	.byte  5
-	.byte  5
+	altinstruction_entry 0b,2b,\feature1,5,5
+	altinstruction_entry 0b,3b,\feature2,5,5
 	.previous
 	.endm
 
@@ -72,8 +79,10 @@ ENTRY(_copy_to_user)
 	addq %rdx,%rcx
 	jc bad_to_user
 	cmpq TI_addr_limit(%rax),%rcx
-	jae bad_to_user
-	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+	ja bad_to_user
+	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS,	\
+		copy_user_generic_unrolled,copy_user_generic_string,	\
+		copy_user_enhanced_fast_string
 	CFI_ENDPROC
 ENDPROC(_copy_to_user)
 
@@ -85,8 +94,10 @@ ENTRY(_copy_from_user)
 	addq %rdx,%rcx
 	jc bad_from_user
 	cmpq TI_addr_limit(%rax),%rcx
-	jae bad_from_user
-	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+	ja bad_from_user
+	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS,	\
+		copy_user_generic_unrolled,copy_user_generic_string,	\
+		copy_user_enhanced_fast_string
 	CFI_ENDPROC
 ENDPROC(_copy_from_user)
 
@@ -255,3 +266,37 @@ ENTRY(copy_user_generic_string)
 	.previous
 	CFI_ENDPROC
 ENDPROC(copy_user_generic_string)
+
+/*
+ * Some CPUs are adding enhanced REP MOVSB/STOSB instructions.
+ * It's recommended to use enhanced REP MOVSB/STOSB if it's enabled.
+ *
+ * Input:
+ * rdi destination
+ * rsi source
+ * rdx count
+ *
+ * Output:
+ * eax uncopied bytes or 0 if successful.
+ */
+ENTRY(copy_user_enhanced_fast_string)
+	CFI_STARTPROC
+	andl %edx,%edx
+	jz 2f
+	movl %edx,%ecx
+1:	rep
+	movsb
+2:	xorl %eax,%eax
+	ret
+
+	.section .fixup,"ax"
+12:	movl %ecx,%edx		/* ecx is zerorest also */
+	jmp copy_user_handle_tail
+	.previous
+
+	.section __ex_table,"a"
+	.align 8
+	.quad 1b,12b
+	.previous
+	CFI_ENDPROC
+ENDPROC(copy_user_enhanced_fast_string)
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 75ef61e35e3..efbf2a0ecde 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -4,6 +4,7 @@
 
 #include <asm/cpufeature.h>
 #include <asm/dwarf2.h>
+#include <asm/alternative-asm.h>
 
 /*
  * memcpy - Copy a memory block.
@@ -37,6 +38,23 @@
 .Lmemcpy_e:
 	.previous
 
+/*
+ * memcpy_c_e() - enhanced fast string memcpy. This is faster and simpler than
+ * memcpy_c. Use memcpy_c_e when possible.
+ *
+ * This gets patched over the unrolled variant (below) via the
+ * alternative instructions framework:
+ */
+	.section .altinstr_replacement, "ax", @progbits
+.Lmemcpy_c_e:
+	movq %rdi, %rax
+
+	movl %edx, %ecx
+	rep movsb
+	ret
+.Lmemcpy_e_e:
+	.previous
+
 ENTRY(__memcpy)
 ENTRY(memcpy)
 	CFI_STARTPROC
@@ -49,7 +67,7 @@ ENTRY(memcpy)
 	jb .Lhandle_tail
 
 	/*
-	 * We check whether memory false dependece could occur,
+	 * We check whether memory false dependence could occur,
 	 * then jump to corresponding copy mode.
 	 */
 	cmp  %dil, %sil
@@ -171,21 +189,22 @@ ENDPROC(memcpy)
 ENDPROC(__memcpy)
 
 	/*
-	 * Some CPUs run faster using the string copy instructions.
-	 * It is also a lot simpler. Use this when possible:
-	 */
-
-	.section .altinstructions, "a"
-	.align 8
-	.quad memcpy
-	.quad .Lmemcpy_c
-	.word X86_FEATURE_REP_GOOD
-
-	/*
+	 * Some CPUs are adding enhanced REP MOVSB/STOSB feature
+	 * If the feature is supported, memcpy_c_e() is the first choice.
+	 * If enhanced rep movsb copy is not available, use fast string copy
+	 * memcpy_c() when possible. This is faster and code is simpler than
+	 * original memcpy().
+	 * Otherwise, original memcpy() is used.
+	 * In .altinstructions section, ERMS feature is placed after REG_GOOD
+         * feature to implement the right patch order.
+	 *
 	 * Replace only beginning, memcpy is used to apply alternatives,
 	 * so it is silly to overwrite itself with nops - reboot is the
 	 * only outcome...
 	 */
-	.byte .Lmemcpy_e - .Lmemcpy_c
-	.byte .Lmemcpy_e - .Lmemcpy_c
+	.section .altinstructions, "a"
+	altinstruction_entry memcpy,.Lmemcpy_c,X86_FEATURE_REP_GOOD,\
+			     .Lmemcpy_e-.Lmemcpy_c,.Lmemcpy_e-.Lmemcpy_c
+	altinstruction_entry memcpy,.Lmemcpy_c_e,X86_FEATURE_ERMS, \
+			     .Lmemcpy_e_e-.Lmemcpy_c_e,.Lmemcpy_e_e-.Lmemcpy_c_e
 	.previous
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 0ecb8433e5a..d0ec9c2936d 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -8,6 +8,7 @@
 #define _STRING_C
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
 
 #undef memmove
 
@@ -24,6 +25,7 @@
  */
 ENTRY(memmove)
 	CFI_STARTPROC
+
 	/* Handle more 32bytes in loop */
 	mov %rdi, %rax
 	cmp $0x20, %rdx
@@ -31,8 +33,13 @@ ENTRY(memmove)
 
 	/* Decide forward/backward copy mode */
 	cmp %rdi, %rsi
-	jb	2f
+	jge .Lmemmove_begin_forward
+	mov %rsi, %r8
+	add %rdx, %r8
+	cmp %rdi, %r8
+	jg 2f
 
+.Lmemmove_begin_forward:
 	/*
 	 * movsq instruction have many startup latency
 	 * so we handle small size by general register.
@@ -78,6 +85,8 @@ ENTRY(memmove)
 	rep movsq
 	movq %r11, (%r10)
 	jmp 13f
+.Lmemmove_end_forward:
+
 	/*
 	 * Handle data backward by movsq.
 	 */
@@ -194,4 +203,22 @@ ENTRY(memmove)
 13:
 	retq
 	CFI_ENDPROC
+
+	.section .altinstr_replacement,"ax"
+.Lmemmove_begin_forward_efs:
+	/* Forward moving data. */
+	movq %rdx, %rcx
+	rep movsb
+	retq
+.Lmemmove_end_forward_efs:
+	.previous
+
+	.section .altinstructions,"a"
+	.align 8
+	.quad .Lmemmove_begin_forward
+	.quad .Lmemmove_begin_forward_efs
+	.word X86_FEATURE_ERMS
+	.byte .Lmemmove_end_forward-.Lmemmove_begin_forward
+	.byte .Lmemmove_end_forward_efs-.Lmemmove_begin_forward_efs
+	.previous
 ENDPROC(memmove)
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 09d34426965..79bd454b78a 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -2,9 +2,13 @@
 
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
 
 /*
- * ISO C memset - set a memory block to a byte value.
+ * ISO C memset - set a memory block to a byte value. This function uses fast
+ * string to get better performance than the original function. The code is
+ * simpler and shorter than the orignal function as well.
  *	
  * rdi   destination
  * rsi   value (char) 
@@ -31,6 +35,28 @@
 .Lmemset_e:
 	.previous
 
+/*
+ * ISO C memset - set a memory block to a byte value. This function uses
+ * enhanced rep stosb to override the fast string function.
+ * The code is simpler and shorter than the fast string function as well.
+ *
+ * rdi   destination
+ * rsi   value (char)
+ * rdx   count (bytes)
+ *
+ * rax   original destination
+ */
+	.section .altinstr_replacement, "ax", @progbits
+.Lmemset_c_e:
+	movq %rdi,%r9
+	movb %sil,%al
+	movl %edx,%ecx
+	rep stosb
+	movq %r9,%rax
+	ret
+.Lmemset_e_e:
+	.previous
+
 ENTRY(memset)
 ENTRY(__memset)
 	CFI_STARTPROC
@@ -112,16 +138,20 @@ ENTRY(__memset)
 ENDPROC(memset)
 ENDPROC(__memset)
 
-	/* Some CPUs run faster using the string instructions.
-	   It is also a lot simpler. Use this when possible */
-
-#include <asm/cpufeature.h>
-
+	/* Some CPUs support enhanced REP MOVSB/STOSB feature.
+	 * It is recommended to use this when possible.
+	 *
+	 * If enhanced REP MOVSB/STOSB feature is not available, use fast string
+	 * instructions.
+	 *
+	 * Otherwise, use original memset function.
+	 *
+	 * In .altinstructions section, ERMS feature is placed after REG_GOOD
+         * feature to implement the right patch order.
+	 */
 	.section .altinstructions,"a"
-	.align 8
-	.quad memset
-	.quad .Lmemset_c
-	.word X86_FEATURE_REP_GOOD
-	.byte .Lfinal - memset
-	.byte .Lmemset_e - .Lmemset_c
+	altinstruction_entry memset,.Lmemset_c,X86_FEATURE_REP_GOOD,\
+			     .Lfinal-memset,.Lmemset_e-.Lmemset_c
+	altinstruction_entry memset,.Lmemset_c_e,X86_FEATURE_ERMS, \
+			     .Lfinal-memset,.Lmemset_e_e-.Lmemset_c_e
 	.previous
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 3e608edf995..3d11327c9ab 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -23,8 +23,8 @@ mmiotrace-y			:= kmmio.o pf_in.o mmio-mod.o
 obj-$(CONFIG_MMIOTRACE_TEST)	+= testmmiotrace.o
 
 obj-$(CONFIG_NUMA)		+= numa.o numa_$(BITS).o
-obj-$(CONFIG_AMD_NUMA)		+= amdtopology_64.o
-obj-$(CONFIG_ACPI_NUMA)		+= srat_$(BITS).o
+obj-$(CONFIG_AMD_NUMA)		+= amdtopology.o
+obj-$(CONFIG_ACPI_NUMA)		+= srat.o
 obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
 
 obj-$(CONFIG_HAVE_MEMBLOCK)		+= memblock.o
diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology.c
index 0919c26820d..5247d01329c 100644
--- a/arch/x86/mm/amdtopology_64.c
+++ b/arch/x86/mm/amdtopology.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
+#include <linux/bootmem.h>
 
 #include <asm/io.h>
 #include <linux/pci_ids.h>
@@ -69,10 +70,10 @@ static __init void early_get_boot_cpu_id(void)
 
 int __init amd_numa_init(void)
 {
-	unsigned long start = PFN_PHYS(0);
-	unsigned long end = PFN_PHYS(max_pfn);
+	u64 start = PFN_PHYS(0);
+	u64 end = PFN_PHYS(max_pfn);
 	unsigned numnodes;
-	unsigned long prevbase;
+	u64 prevbase;
 	int i, j, nb;
 	u32 nodeid, reg;
 	unsigned int bits, cores, apicid_base;
@@ -95,7 +96,7 @@ int __init amd_numa_init(void)
 
 	prevbase = 0;
 	for (i = 0; i < 8; i++) {
-		unsigned long base, limit;
+		u64 base, limit;
 
 		base = read_pci_config(0, nb, 1, 0x40 + i*8);
 		limit = read_pci_config(0, nb, 1, 0x44 + i*8);
@@ -107,18 +108,18 @@ int __init amd_numa_init(void)
 			continue;
 		}
 		if (nodeid >= numnodes) {
-			pr_info("Ignoring excess node %d (%lx:%lx)\n", nodeid,
+			pr_info("Ignoring excess node %d (%Lx:%Lx)\n", nodeid,
 				base, limit);
 			continue;
 		}
 
 		if (!limit) {
-			pr_info("Skipping node entry %d (base %lx)\n",
+			pr_info("Skipping node entry %d (base %Lx)\n",
 				i, base);
 			continue;
 		}
 		if ((base >> 8) & 3 || (limit >> 8) & 3) {
-			pr_err("Node %d using interleaving mode %lx/%lx\n",
+			pr_err("Node %d using interleaving mode %Lx/%Lx\n",
 			       nodeid, (base >> 8) & 3, (limit >> 8) & 3);
 			return -EINVAL;
 		}
@@ -150,19 +151,19 @@ int __init amd_numa_init(void)
 			continue;
 		}
 		if (limit < base) {
-			pr_err("Node %d bogus settings %lx-%lx.\n",
+			pr_err("Node %d bogus settings %Lx-%Lx.\n",
 			       nodeid, base, limit);
 			continue;
 		}
 
 		/* Could sort here, but pun for now. Should not happen anyroads. */
 		if (prevbase > base) {
-			pr_err("Node map not sorted %lx,%lx\n",
+			pr_err("Node map not sorted %Lx,%Lx\n",
 			       prevbase, base);
 			return -EINVAL;
 		}
 
-		pr_info("Node %d MemBase %016lx Limit %016lx\n",
+		pr_info("Node %d MemBase %016Lx Limit %016Lx\n",
 			nodeid, base, limit);
 
 		prevbase = base;
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 20e3f8702d1..bcb394dfbb3 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -12,6 +12,7 @@
 #include <linux/mmiotrace.h>		/* kmmio_handler, ...		*/
 #include <linux/perf_event.h>		/* perf_sw_event		*/
 #include <linux/hugetlb.h>		/* hstate_index_to_shift	*/
+#include <linux/prefetch.h>		/* prefetchw			*/
 
 #include <asm/traps.h>			/* dotraplinkage, ...		*/
 #include <asm/pgalloc.h>		/* pgd_*(), ...			*/
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 286d289b039..37b8b0fe832 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -81,6 +81,11 @@ static void __init find_early_table_space(unsigned long end, int use_pse,
 		end, pgt_buf_start << PAGE_SHIFT, pgt_buf_top << PAGE_SHIFT);
 }
 
+void __init native_pagetable_reserve(u64 start, u64 end)
+{
+	memblock_x86_reserve_range(start, end, "PGTABLE");
+}
+
 struct map_range {
 	unsigned long start;
 	unsigned long end;
@@ -272,9 +277,24 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 
 	__flush_tlb_all();
 
+	/*
+	 * Reserve the kernel pagetable pages we used (pgt_buf_start -
+	 * pgt_buf_end) and free the other ones (pgt_buf_end - pgt_buf_top)
+	 * so that they can be reused for other purposes.
+	 *
+	 * On native it just means calling memblock_x86_reserve_range, on Xen it
+	 * also means marking RW the pagetable pages that we allocated before
+	 * but that haven't been used.
+	 *
+	 * In fact on xen we mark RO the whole range pgt_buf_start -
+	 * pgt_buf_top, because we have to make sure that when
+	 * init_memory_mapping reaches the pagetable pages area, it maps
+	 * RO all the pagetable pages, including the ones that are beyond
+	 * pgt_buf_end at that time.
+	 */
 	if (!after_bootmem && pgt_buf_end > pgt_buf_start)
-		memblock_x86_reserve_range(pgt_buf_start << PAGE_SHIFT,
-				 pgt_buf_end << PAGE_SHIFT, "PGTABLE");
+		x86_init.mapping.pagetable_reserve(PFN_PHYS(pgt_buf_start),
+				PFN_PHYS(pgt_buf_end));
 
 	if (!after_bootmem)
 		early_memtest(start, end);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 80088f99419..29f7c6d9817 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -678,8 +678,10 @@ static void __init zone_sizes_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+#ifdef CONFIG_ZONE_DMA
 	max_zone_pfns[ZONE_DMA] =
 		virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+#endif
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 #ifdef CONFIG_HIGHMEM
 	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
@@ -716,6 +718,7 @@ void __init paging_init(void)
 	 * NOTE: at this point the bootmem allocator is fully available.
 	 */
 	olpc_dt_build_devicetree();
+	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
 	zone_sizes_init();
 }
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 79423358728..d865c4aeec5 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -616,7 +616,9 @@ void __init paging_init(void)
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+#ifdef CONFIG_ZONE_DMA
 	max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
+#endif
 	max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
 	max_zone_pfns[ZONE_NORMAL] = max_pfn;
 
@@ -679,14 +681,6 @@ int arch_add_memory(int nid, u64 start, u64 size)
 }
 EXPORT_SYMBOL_GPL(arch_add_memory);
 
-#if !defined(CONFIG_ACPI_NUMA) && defined(CONFIG_NUMA)
-int memory_add_physaddr_to_nid(u64 start)
-{
-	return 0;
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
-
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
 static struct kcore_list kcore_vsyscall;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 0369843511d..be1ef574ce9 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -91,13 +91,6 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 		return (__force void __iomem *)phys_to_virt(phys_addr);
 
 	/*
-	 * Check if the request spans more than any BAR in the iomem resource
-	 * tree.
-	 */
-	WARN_ONCE(iomem_map_sanity_check(phys_addr, size),
-		  KERN_INFO "Info: mapping multiple BARs. Your kernel is fine.");
-
-	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
 	last_pfn = last_addr >> PAGE_SHIFT;
@@ -170,6 +163,13 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	ret_addr = (void __iomem *) (vaddr + offset);
 	mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr);
 
+	/*
+	 * Check if the request spans more than any BAR in the iomem resource
+	 * tree.
+	 */
+	WARN_ONCE(iomem_map_sanity_check(unaligned_phys_addr, unaligned_size),
+		  KERN_INFO "Info: mapping multiple BARs. Your kernel is fine.");
+
 	return ret_addr;
 err_free_area:
 	free_vm_area(area);
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 9559d360fde..f5510d889a2 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -1,11 +1,39 @@
 /* Common code for 32 and 64-bit NUMA */
-#include <linux/topology.h>
-#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/init.h>
 #include <linux/bootmem.h>
-#include <asm/numa.h>
+#include <linux/memblock.h>
+#include <linux/mmzone.h>
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/nodemask.h>
+#include <linux/sched.h>
+#include <linux/topology.h>
+
+#include <asm/e820.h>
+#include <asm/proto.h>
+#include <asm/dma.h>
 #include <asm/acpi.h>
+#include <asm/amd_nb.h>
+
+#include "numa_internal.h"
 
 int __initdata numa_off;
+nodemask_t numa_nodes_parsed __initdata;
+
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+
+static struct numa_meminfo numa_meminfo
+#ifndef CONFIG_MEMORY_HOTPLUG
+__initdata
+#endif
+;
+
+static int numa_distance_cnt;
+static u8 *numa_distance;
 
 static __init int numa_setup(char *opt)
 {
@@ -32,6 +60,15 @@ s16 __apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
 	[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
 };
 
+int __cpuinit numa_cpu_node(int cpu)
+{
+	int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
+
+	if (apicid != BAD_APICID)
+		return __apicid_to_node[apicid];
+	return NUMA_NO_NODE;
+}
+
 cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
 EXPORT_SYMBOL(node_to_cpumask_map);
 
@@ -95,6 +132,407 @@ void __init setup_node_to_cpumask_map(void)
 	pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids);
 }
 
+static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
+				     struct numa_meminfo *mi)
+{
+	/* ignore zero length blks */
+	if (start == end)
+		return 0;
+
+	/* whine about and ignore invalid blks */
+	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
+		pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n",
+			   nid, start, end);
+		return 0;
+	}
+
+	if (mi->nr_blks >= NR_NODE_MEMBLKS) {
+		pr_err("NUMA: too many memblk ranges\n");
+		return -EINVAL;
+	}
+
+	mi->blk[mi->nr_blks].start = start;
+	mi->blk[mi->nr_blks].end = end;
+	mi->blk[mi->nr_blks].nid = nid;
+	mi->nr_blks++;
+	return 0;
+}
+
+/**
+ * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
+ * @idx: Index of memblk to remove
+ * @mi: numa_meminfo to remove memblk from
+ *
+ * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
+ * decrementing @mi->nr_blks.
+ */
+void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
+{
+	mi->nr_blks--;
+	memmove(&mi->blk[idx], &mi->blk[idx + 1],
+		(mi->nr_blks - idx) * sizeof(mi->blk[0]));
+}
+
+/**
+ * numa_add_memblk - Add one numa_memblk to numa_meminfo
+ * @nid: NUMA node ID of the new memblk
+ * @start: Start address of the new memblk
+ * @end: End address of the new memblk
+ *
+ * Add a new memblk to the default numa_meminfo.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init numa_add_memblk(int nid, u64 start, u64 end)
+{
+	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
+}
+
+/* Initialize NODE_DATA for a node on the local memory */
+static void __init setup_node_data(int nid, u64 start, u64 end)
+{
+	const u64 nd_low = PFN_PHYS(MAX_DMA_PFN);
+	const u64 nd_high = PFN_PHYS(max_pfn_mapped);
+	const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
+	bool remapped = false;
+	u64 nd_pa;
+	void *nd;
+	int tnid;
+
+	/*
+	 * Don't confuse VM with a node that doesn't have the
+	 * minimum amount of memory:
+	 */
+	if (end && (end - start) < NODE_MIN_SIZE)
+		return;
+
+	/* initialize remap allocator before aligning to ZONE_ALIGN */
+	init_alloc_remap(nid, start, end);
+
+	start = roundup(start, ZONE_ALIGN);
+
+	printk(KERN_INFO "Initmem setup node %d %016Lx-%016Lx\n",
+	       nid, start, end);
+
+	/*
+	 * Allocate node data.  Try remap allocator first, node-local
+	 * memory and then any node.  Never allocate in DMA zone.
+	 */
+	nd = alloc_remap(nid, nd_size);
+	if (nd) {
+		nd_pa = __pa(nd);
+		remapped = true;
+	} else {
+		nd_pa = memblock_x86_find_in_range_node(nid, nd_low, nd_high,
+						nd_size, SMP_CACHE_BYTES);
+		if (nd_pa == MEMBLOCK_ERROR)
+			nd_pa = memblock_find_in_range(nd_low, nd_high,
+						nd_size, SMP_CACHE_BYTES);
+		if (nd_pa == MEMBLOCK_ERROR) {
+			pr_err("Cannot find %zu bytes in node %d\n",
+			       nd_size, nid);
+			return;
+		}
+		memblock_x86_reserve_range(nd_pa, nd_pa + nd_size, "NODE_DATA");
+		nd = __va(nd_pa);
+	}
+
+	/* report and initialize */
+	printk(KERN_INFO "  NODE_DATA [%016Lx - %016Lx]%s\n",
+	       nd_pa, nd_pa + nd_size - 1, remapped ? " (remapped)" : "");
+	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
+	if (!remapped && tnid != nid)
+		printk(KERN_INFO "    NODE_DATA(%d) on node %d\n", nid, tnid);
+
+	node_data[nid] = nd;
+	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
+	NODE_DATA(nid)->node_id = nid;
+	NODE_DATA(nid)->node_start_pfn = start >> PAGE_SHIFT;
+	NODE_DATA(nid)->node_spanned_pages = (end - start) >> PAGE_SHIFT;
+
+	node_set_online(nid);
+}
+
+/**
+ * numa_cleanup_meminfo - Cleanup a numa_meminfo
+ * @mi: numa_meminfo to clean up
+ *
+ * Sanitize @mi by merging and removing unncessary memblks.  Also check for
+ * conflicts and clear unused memblks.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
+{
+	const u64 low = 0;
+	const u64 high = PFN_PHYS(max_pfn);
+	int i, j, k;
+
+	/* first, trim all entries */
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *bi = &mi->blk[i];
+
+		/* make sure all blocks are inside the limits */
+		bi->start = max(bi->start, low);
+		bi->end = min(bi->end, high);
+
+		/* and there's no empty block */
+		if (bi->start >= bi->end)
+			numa_remove_memblk_from(i--, mi);
+	}
+
+	/* merge neighboring / overlapping entries */
+	for (i = 0; i < mi->nr_blks; i++) {
+		struct numa_memblk *bi = &mi->blk[i];
+
+		for (j = i + 1; j < mi->nr_blks; j++) {
+			struct numa_memblk *bj = &mi->blk[j];
+			u64 start, end;
+
+			/*
+			 * See whether there are overlapping blocks.  Whine
+			 * about but allow overlaps of the same nid.  They
+			 * will be merged below.
+			 */
+			if (bi->end > bj->start && bi->start < bj->end) {
+				if (bi->nid != bj->nid) {
+					pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n",
+					       bi->nid, bi->start, bi->end,
+					       bj->nid, bj->start, bj->end);
+					return -EINVAL;
+				}
+				pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n",
+					   bi->nid, bi->start, bi->end,
+					   bj->start, bj->end);
+			}
+
+			/*
+			 * Join together blocks on the same node, holes
+			 * between which don't overlap with memory on other
+			 * nodes.
+			 */
+			if (bi->nid != bj->nid)
+				continue;
+			start = min(bi->start, bj->start);
+			end = max(bi->end, bj->end);
+			for (k = 0; k < mi->nr_blks; k++) {
+				struct numa_memblk *bk = &mi->blk[k];
+
+				if (bi->nid == bk->nid)
+					continue;
+				if (start < bk->end && end > bk->start)
+					break;
+			}
+			if (k < mi->nr_blks)
+				continue;
+			printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%Lx,%Lx)\n",
+			       bi->nid, bi->start, bi->end, bj->start, bj->end,
+			       start, end);
+			bi->start = start;
+			bi->end = end;
+			numa_remove_memblk_from(j--, mi);
+		}
+	}
+
+	/* clear unused ones */
+	for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
+		mi->blk[i].start = mi->blk[i].end = 0;
+		mi->blk[i].nid = NUMA_NO_NODE;
+	}
+
+	return 0;
+}
+
+/*
+ * Set nodes, which have memory in @mi, in *@nodemask.
+ */
+static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
+					      const struct numa_meminfo *mi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
+		if (mi->blk[i].start != mi->blk[i].end &&
+		    mi->blk[i].nid != NUMA_NO_NODE)
+			node_set(mi->blk[i].nid, *nodemask);
+}
+
+/**
+ * numa_reset_distance - Reset NUMA distance table
+ *
+ * The current table is freed.  The next numa_set_distance() call will
+ * create a new one.
+ */
+void __init numa_reset_distance(void)
+{
+	size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
+
+	/* numa_distance could be 1LU marking allocation failure, test cnt */
+	if (numa_distance_cnt)
+		memblock_x86_free_range(__pa(numa_distance),
+					__pa(numa_distance) + size);
+	numa_distance_cnt = 0;
+	numa_distance = NULL;	/* enable table creation */
+}
+
+static int __init numa_alloc_distance(void)
+{
+	nodemask_t nodes_parsed;
+	size_t size;
+	int i, j, cnt = 0;
+	u64 phys;
+
+	/* size the new table and allocate it */
+	nodes_parsed = numa_nodes_parsed;
+	numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
+
+	for_each_node_mask(i, nodes_parsed)
+		cnt = i;
+	cnt++;
+	size = cnt * cnt * sizeof(numa_distance[0]);
+
+	phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
+				      size, PAGE_SIZE);
+	if (phys == MEMBLOCK_ERROR) {
+		pr_warning("NUMA: Warning: can't allocate distance table!\n");
+		/* don't retry until explicitly reset */
+		numa_distance = (void *)1LU;
+		return -ENOMEM;
+	}
+	memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
+
+	numa_distance = __va(phys);
+	numa_distance_cnt = cnt;
+
+	/* fill with the default distances */
+	for (i = 0; i < cnt; i++)
+		for (j = 0; j < cnt; j++)
+			numa_distance[i * cnt + j] = i == j ?
+				LOCAL_DISTANCE : REMOTE_DISTANCE;
+	printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
+
+	return 0;
+}
+
+/**
+ * numa_set_distance - Set NUMA distance from one NUMA to another
+ * @from: the 'from' node to set distance
+ * @to: the 'to'  node to set distance
+ * @distance: NUMA distance
+ *
+ * Set the distance from node @from to @to to @distance.  If distance table
+ * doesn't exist, one which is large enough to accommodate all the currently
+ * known nodes will be created.
+ *
+ * If such table cannot be allocated, a warning is printed and further
+ * calls are ignored until the distance table is reset with
+ * numa_reset_distance().
+ *
+ * If @from or @to is higher than the highest known node at the time of
+ * table creation or @distance doesn't make sense, the call is ignored.
+ * This is to allow simplification of specific NUMA config implementations.
+ */
+void __init numa_set_distance(int from, int to, int distance)
+{
+	if (!numa_distance && numa_alloc_distance() < 0)
+		return;
+
+	if (from >= numa_distance_cnt || to >= numa_distance_cnt) {
+		printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n",
+			    from, to, distance);
+		return;
+	}
+
+	if ((u8)distance != distance ||
+	    (from == to && distance != LOCAL_DISTANCE)) {
+		pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+			     from, to, distance);
+		return;
+	}
+
+	numa_distance[from * numa_distance_cnt + to] = distance;
+}
+
+int __node_distance(int from, int to)
+{
+	if (from >= numa_distance_cnt || to >= numa_distance_cnt)
+		return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
+	return numa_distance[from * numa_distance_cnt + to];
+}
+EXPORT_SYMBOL(__node_distance);
+
+/*
+ * Sanity check to catch more bad NUMA configurations (they are amazingly
+ * common).  Make sure the nodes cover all memory.
+ */
+static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
+{
+	u64 numaram, e820ram;
+	int i;
+
+	numaram = 0;
+	for (i = 0; i < mi->nr_blks; i++) {
+		u64 s = mi->blk[i].start >> PAGE_SHIFT;
+		u64 e = mi->blk[i].end >> PAGE_SHIFT;
+		numaram += e - s;
+		numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
+		if ((s64)numaram < 0)
+			numaram = 0;
+	}
+
+	e820ram = max_pfn - (memblock_x86_hole_size(0,
+					PFN_PHYS(max_pfn)) >> PAGE_SHIFT);
+	/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
+	if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
+		printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
+		       (numaram << PAGE_SHIFT) >> 20,
+		       (e820ram << PAGE_SHIFT) >> 20);
+		return false;
+	}
+	return true;
+}
+
+static int __init numa_register_memblks(struct numa_meminfo *mi)
+{
+	int i, nid;
+
+	/* Account for nodes with cpus and no memory */
+	node_possible_map = numa_nodes_parsed;
+	numa_nodemask_from_meminfo(&node_possible_map, mi);
+	if (WARN_ON(nodes_empty(node_possible_map)))
+		return -EINVAL;
+
+	for (i = 0; i < mi->nr_blks; i++)
+		memblock_x86_register_active_regions(mi->blk[i].nid,
+					mi->blk[i].start >> PAGE_SHIFT,
+					mi->blk[i].end >> PAGE_SHIFT);
+
+	/* for out of order entries */
+	sort_node_map();
+	if (!numa_meminfo_cover_memory(mi))
+		return -EINVAL;
+
+	/* Finally register nodes. */
+	for_each_node_mask(nid, node_possible_map) {
+		u64 start = PFN_PHYS(max_pfn);
+		u64 end = 0;
+
+		for (i = 0; i < mi->nr_blks; i++) {
+			if (nid != mi->blk[i].nid)
+				continue;
+			start = min(mi->blk[i].start, start);
+			end = max(mi->blk[i].end, end);
+		}
+
+		if (start < end)
+			setup_node_data(nid, start, end);
+	}
+
+	return 0;
+}
+
 /*
  * There are unfortunately some poorly designed mainboards around that
  * only connect memory to a single CPU. This breaks the 1:1 cpu->node
@@ -102,7 +540,7 @@ void __init setup_node_to_cpumask_map(void)
  * as the number of CPUs is not known yet. We round robin the existing
  * nodes.
  */
-void __init numa_init_array(void)
+static void __init numa_init_array(void)
 {
 	int rr, i;
 
@@ -117,6 +555,95 @@ void __init numa_init_array(void)
 	}
 }
 
+static int __init numa_init(int (*init_func)(void))
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < MAX_LOCAL_APIC; i++)
+		set_apicid_to_node(i, NUMA_NO_NODE);
+
+	nodes_clear(numa_nodes_parsed);
+	nodes_clear(node_possible_map);
+	nodes_clear(node_online_map);
+	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
+	remove_all_active_ranges();
+	numa_reset_distance();
+
+	ret = init_func();
+	if (ret < 0)
+		return ret;
+	ret = numa_cleanup_meminfo(&numa_meminfo);
+	if (ret < 0)
+		return ret;
+
+	numa_emulation(&numa_meminfo, numa_distance_cnt);
+
+	ret = numa_register_memblks(&numa_meminfo);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < nr_cpu_ids; i++) {
+		int nid = early_cpu_to_node(i);
+
+		if (nid == NUMA_NO_NODE)
+			continue;
+		if (!node_online(nid))
+			numa_clear_node(i);
+	}
+	numa_init_array();
+	return 0;
+}
+
+/**
+ * dummy_numa_init - Fallback dummy NUMA init
+ *
+ * Used if there's no underlying NUMA architecture, NUMA initialization
+ * fails, or NUMA is disabled on the command line.
+ *
+ * Must online at least one node and add memory blocks that cover all
+ * allowed memory.  This function must not fail.
+ */
+static int __init dummy_numa_init(void)
+{
+	printk(KERN_INFO "%s\n",
+	       numa_off ? "NUMA turned off" : "No NUMA configuration found");
+	printk(KERN_INFO "Faking a node at %016Lx-%016Lx\n",
+	       0LLU, PFN_PHYS(max_pfn));
+
+	node_set(0, numa_nodes_parsed);
+	numa_add_memblk(0, 0, PFN_PHYS(max_pfn));
+
+	return 0;
+}
+
+/**
+ * x86_numa_init - Initialize NUMA
+ *
+ * Try each configured NUMA initialization method until one succeeds.  The
+ * last fallback is dummy single node config encomapssing whole memory and
+ * never fails.
+ */
+void __init x86_numa_init(void)
+{
+	if (!numa_off) {
+#ifdef CONFIG_X86_NUMAQ
+		if (!numa_init(numaq_numa_init))
+			return;
+#endif
+#ifdef CONFIG_ACPI_NUMA
+		if (!numa_init(x86_acpi_numa_init))
+			return;
+#endif
+#ifdef CONFIG_AMD_NUMA
+		if (!numa_init(amd_numa_init))
+			return;
+#endif
+	}
+
+	numa_init(dummy_numa_init);
+}
+
 static __init int find_near_online_node(int node)
 {
 	int n, val;
@@ -213,53 +740,48 @@ int early_cpu_to_node(int cpu)
 	return per_cpu(x86_cpu_to_node_map, cpu);
 }
 
-struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable)
+void debug_cpumask_set_cpu(int cpu, int node, bool enable)
 {
-	int node = early_cpu_to_node(cpu);
 	struct cpumask *mask;
 	char buf[64];
 
 	if (node == NUMA_NO_NODE) {
 		/* early_cpu_to_node() already emits a warning and trace */
-		return NULL;
+		return;
 	}
 	mask = node_to_cpumask_map[node];
 	if (!mask) {
 		pr_err("node_to_cpumask_map[%i] NULL\n", node);
 		dump_stack();
-		return NULL;
+		return;
 	}
 
+	if (enable)
+		cpumask_set_cpu(cpu, mask);
+	else
+		cpumask_clear_cpu(cpu, mask);
+
 	cpulist_scnprintf(buf, sizeof(buf), mask);
 	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
 		enable ? "numa_add_cpu" : "numa_remove_cpu",
 		cpu, node, buf);
-	return mask;
+	return;
 }
 
 # ifndef CONFIG_NUMA_EMU
-static void __cpuinit numa_set_cpumask(int cpu, int enable)
+static void __cpuinit numa_set_cpumask(int cpu, bool enable)
 {
-	struct cpumask *mask;
-
-	mask = debug_cpumask_set_cpu(cpu, enable);
-	if (!mask)
-		return;
-
-	if (enable)
-		cpumask_set_cpu(cpu, mask);
-	else
-		cpumask_clear_cpu(cpu, mask);
+	debug_cpumask_set_cpu(cpu, early_cpu_to_node(cpu), enable);
 }
 
 void __cpuinit numa_add_cpu(int cpu)
 {
-	numa_set_cpumask(cpu, 1);
+	numa_set_cpumask(cpu, true);
 }
 
 void __cpuinit numa_remove_cpu(int cpu)
 {
-	numa_set_cpumask(cpu, 0);
+	numa_set_cpumask(cpu, false);
 }
 # endif	/* !CONFIG_NUMA_EMU */
 
@@ -287,3 +809,18 @@ const struct cpumask *cpumask_of_node(int node)
 EXPORT_SYMBOL(cpumask_of_node);
 
 #endif	/* !CONFIG_DEBUG_PER_CPU_MAPS */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int memory_add_physaddr_to_nid(u64 start)
+{
+	struct numa_meminfo *mi = &numa_meminfo;
+	int nid = mi->blk[0].nid;
+	int i;
+
+	for (i = 0; i < mi->nr_blks; i++)
+		if (mi->blk[i].start <= start && mi->blk[i].end > start)
+			nid = mi->blk[i].nid;
+	return nid;
+}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index bde3906420d..849a975d3fa 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -22,39 +22,11 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/mm.h>
 #include <linux/bootmem.h>
 #include <linux/memblock.h>
-#include <linux/mmzone.h>
-#include <linux/highmem.h>
-#include <linux/initrd.h>
-#include <linux/nodemask.h>
 #include <linux/module.h>
-#include <linux/kexec.h>
-#include <linux/pfn.h>
-#include <linux/swap.h>
-#include <linux/acpi.h>
-
-#include <asm/e820.h>
-#include <asm/setup.h>
-#include <asm/mmzone.h>
-#include <asm/bios_ebda.h>
-#include <asm/proto.h>
-
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
-
-/*
- * numa interface - we expect the numa architecture specific code to have
- *                  populated the following initialisation.
- *
- * 1) node_online_map  - the map of all nodes configured (online) in the system
- * 2) node_start_pfn   - the starting page frame number for a node
- * 3) node_end_pfn     - the ending page fram number for a node
- */
-unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
-unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
 
+#include "numa_internal.h"
 
 #ifdef CONFIG_DISCONTIGMEM
 /*
@@ -99,108 +71,46 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
 }
 #endif
 
-extern unsigned long find_max_low_pfn(void);
 extern unsigned long highend_pfn, highstart_pfn;
 
 #define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
 
-unsigned long node_remap_size[MAX_NUMNODES];
 static void *node_remap_start_vaddr[MAX_NUMNODES];
 void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
 
-static unsigned long kva_start_pfn;
-static unsigned long kva_pages;
-
-int __cpuinit numa_cpu_node(int cpu)
-{
-	return apic->x86_32_numa_cpu_node(cpu);
-}
-
-/*
- * FLAT - support for basic PC memory model with discontig enabled, essentially
- *        a single node with all available processors in it with a flat
- *        memory map.
- */
-int __init get_memcfg_numa_flat(void)
-{
-	printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
-
-	node_start_pfn[0] = 0;
-	node_end_pfn[0] = max_pfn;
-	memblock_x86_register_active_regions(0, 0, max_pfn);
-	memory_present(0, 0, max_pfn);
-	node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
-
-        /* Indicate there is one node available. */
-	nodes_clear(node_online_map);
-	node_set_online(0);
-	return 1;
-}
-
-/*
- * Find the highest page frame number we have available for the node
- */
-static void __init propagate_e820_map_node(int nid)
-{
-	if (node_end_pfn[nid] > max_pfn)
-		node_end_pfn[nid] = max_pfn;
-	/*
-	 * if a user has given mem=XXXX, then we need to make sure 
-	 * that the node _starts_ before that, too, not just ends
-	 */
-	if (node_start_pfn[nid] > max_pfn)
-		node_start_pfn[nid] = max_pfn;
-	BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
-}
-
-/* 
- * Allocate memory for the pg_data_t for this node via a crude pre-bootmem
- * method.  For node zero take this from the bottom of memory, for
- * subsequent nodes place them at node_remap_start_vaddr which contains
- * node local data in physically node local memory.  See setup_memory()
- * for details.
- */
-static void __init allocate_pgdat(int nid)
-{
-	char buf[16];
-
-	if (node_has_online_mem(nid) && node_remap_start_vaddr[nid])
-		NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
-	else {
-		unsigned long pgdat_phys;
-		pgdat_phys = memblock_find_in_range(min_low_pfn<<PAGE_SHIFT,
-				 max_pfn_mapped<<PAGE_SHIFT,
-				 sizeof(pg_data_t),
-				 PAGE_SIZE);
-		NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
-		memset(buf, 0, sizeof(buf));
-		sprintf(buf, "NODE_DATA %d",  nid);
-		memblock_x86_reserve_range(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
-	}
-	printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
-		nid, (unsigned long)NODE_DATA(nid));
-}
-
 /*
- * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel
- * virtual address space (KVA) is reserved and portions of nodes are mapped
- * using it. This is to allow node-local memory to be allocated for
- * structures that would normally require ZONE_NORMAL. The memory is
- * allocated with alloc_remap() and callers should be prepared to allocate
- * from the bootmem allocator instead.
+ * Remap memory allocator
  */
 static unsigned long node_remap_start_pfn[MAX_NUMNODES];
 static void *node_remap_end_vaddr[MAX_NUMNODES];
 static void *node_remap_alloc_vaddr[MAX_NUMNODES];
-static unsigned long node_remap_offset[MAX_NUMNODES];
 
+/**
+ * alloc_remap - Allocate remapped memory
+ * @nid: NUMA node to allocate memory from
+ * @size: The size of allocation
+ *
+ * Allocate @size bytes from the remap area of NUMA node @nid.  The
+ * size of the remap area is predetermined by init_alloc_remap() and
+ * only the callers considered there should call this function.  For
+ * more info, please read the comment on top of init_alloc_remap().
+ *
+ * The caller must be ready to handle allocation failure from this
+ * function and fall back to regular memory allocator in such cases.
+ *
+ * CONTEXT:
+ * Single CPU early boot context.
+ *
+ * RETURNS:
+ * Pointer to the allocated memory on success, %NULL on failure.
+ */
 void *alloc_remap(int nid, unsigned long size)
 {
 	void *allocation = node_remap_alloc_vaddr[nid];
 
 	size = ALIGN(size, L1_CACHE_BYTES);
 
-	if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid])
+	if (!allocation || (allocation + size) > node_remap_end_vaddr[nid])
 		return NULL;
 
 	node_remap_alloc_vaddr[nid] += size;
@@ -209,26 +119,6 @@ void *alloc_remap(int nid, unsigned long size)
 	return allocation;
 }
 
-static void __init remap_numa_kva(void)
-{
-	void *vaddr;
-	unsigned long pfn;
-	int node;
-
-	for_each_online_node(node) {
-		printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
-		for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
-			vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
-			printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
-				(unsigned long)vaddr,
-				node_remap_start_pfn[node] + pfn);
-			set_pmd_pfn((ulong) vaddr, 
-				node_remap_start_pfn[node] + pfn, 
-				PAGE_KERNEL_LARGE);
-		}
-	}
-}
-
 #ifdef CONFIG_HIBERNATION
 /**
  * resume_map_numa_kva - add KVA mapping to the temporary page tables created
@@ -240,15 +130,16 @@ void resume_map_numa_kva(pgd_t *pgd_base)
 	int node;
 
 	for_each_online_node(node) {
-		unsigned long start_va, start_pfn, size, pfn;
+		unsigned long start_va, start_pfn, nr_pages, pfn;
 
 		start_va = (unsigned long)node_remap_start_vaddr[node];
 		start_pfn = node_remap_start_pfn[node];
-		size = node_remap_size[node];
+		nr_pages = (node_remap_end_vaddr[node] -
+			    node_remap_start_vaddr[node]) >> PAGE_SHIFT;
 
 		printk(KERN_DEBUG "%s: node %d\n", __func__, node);
 
-		for (pfn = 0; pfn < size; pfn += PTRS_PER_PTE) {
+		for (pfn = 0; pfn < nr_pages; pfn += PTRS_PER_PTE) {
 			unsigned long vaddr = start_va + (pfn << PAGE_SHIFT);
 			pgd_t *pgd = pgd_base + pgd_index(vaddr);
 			pud_t *pud = pud_offset(pgd, vaddr);
@@ -264,132 +155,89 @@ void resume_map_numa_kva(pgd_t *pgd_base)
 }
 #endif
 
-static __init unsigned long calculate_numa_remap_pages(void)
+/**
+ * init_alloc_remap - Initialize remap allocator for a NUMA node
+ * @nid: NUMA node to initizlie remap allocator for
+ *
+ * NUMA nodes may end up without any lowmem.  As allocating pgdat and
+ * memmap on a different node with lowmem is inefficient, a special
+ * remap allocator is implemented which can be used by alloc_remap().
+ *
+ * For each node, the amount of memory which will be necessary for
+ * pgdat and memmap is calculated and two memory areas of the size are
+ * allocated - one in the node and the other in lowmem; then, the area
+ * in the node is remapped to the lowmem area.
+ *
+ * As pgdat and memmap must be allocated in lowmem anyway, this
+ * doesn't waste lowmem address space; however, the actual lowmem
+ * which gets remapped over is wasted.  The amount shouldn't be
+ * problematic on machines this feature will be used.
+ *
+ * Initialization failure isn't fatal.  alloc_remap() is used
+ * opportunistically and the callers will fall back to other memory
+ * allocation mechanisms on failure.
+ */
+void __init init_alloc_remap(int nid, u64 start, u64 end)
 {
-	int nid;
-	unsigned long size, reserve_pages = 0;
-
-	for_each_online_node(nid) {
-		u64 node_kva_target;
-		u64 node_kva_final;
-
-		/*
-		 * The acpi/srat node info can show hot-add memroy zones
-		 * where memory could be added but not currently present.
-		 */
-		printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
-			nid, node_start_pfn[nid], node_end_pfn[nid]);
-		if (node_start_pfn[nid] > max_pfn)
-			continue;
-		if (!node_end_pfn[nid])
-			continue;
-		if (node_end_pfn[nid] > max_pfn)
-			node_end_pfn[nid] = max_pfn;
-
-		/* ensure the remap includes space for the pgdat. */
-		size = node_remap_size[nid] + sizeof(pg_data_t);
-
-		/* convert size to large (pmd size) pages, rounding up */
-		size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES;
-		/* now the roundup is correct, convert to PAGE_SIZE pages */
-		size = size * PTRS_PER_PTE;
-
-		node_kva_target = round_down(node_end_pfn[nid] - size,
-						 PTRS_PER_PTE);
-		node_kva_target <<= PAGE_SHIFT;
-		do {
-			node_kva_final = memblock_find_in_range(node_kva_target,
-					((u64)node_end_pfn[nid])<<PAGE_SHIFT,
-						((u64)size)<<PAGE_SHIFT,
-						LARGE_PAGE_BYTES);
-			node_kva_target -= LARGE_PAGE_BYTES;
-		} while (node_kva_final == MEMBLOCK_ERROR &&
-			 (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
-
-		if (node_kva_final == MEMBLOCK_ERROR)
-			panic("Can not get kva ram\n");
-
-		node_remap_size[nid] = size;
-		node_remap_offset[nid] = reserve_pages;
-		reserve_pages += size;
-		printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
-				  " node %d at %llx\n",
-				size, nid, node_kva_final>>PAGE_SHIFT);
-
-		/*
-		 *  prevent kva address below max_low_pfn want it on system
-		 *  with less memory later.
-		 *  layout will be: KVA address , KVA RAM
-		 *
-		 *  we are supposed to only record the one less then max_low_pfn
-		 *  but we could have some hole in high memory, and it will only
-		 *  check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide
-		 *  to use it as free.
-		 *  So memblock_x86_reserve_range here, hope we don't run out of that array
-		 */
-		memblock_x86_reserve_range(node_kva_final,
-			      node_kva_final+(((u64)size)<<PAGE_SHIFT),
-			      "KVA RAM");
-
-		node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT;
-	}
-	printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
-			reserve_pages);
-	return reserve_pages;
-}
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long end_pfn = end >> PAGE_SHIFT;
+	unsigned long size, pfn;
+	u64 node_pa, remap_pa;
+	void *remap_va;
 
-static void init_remap_allocator(int nid)
-{
-	node_remap_start_vaddr[nid] = pfn_to_kaddr(
-			kva_start_pfn + node_remap_offset[nid]);
-	node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] +
-		(node_remap_size[nid] * PAGE_SIZE);
-	node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
-		ALIGN(sizeof(pg_data_t), PAGE_SIZE);
-
-	printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
-		(ulong) node_remap_start_vaddr[nid],
-		(ulong) node_remap_end_vaddr[nid]);
+	/*
+	 * The acpi/srat node info can show hot-add memroy zones where
+	 * memory could be added but not currently present.
+	 */
+	printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
+	       nid, start_pfn, end_pfn);
+
+	/* calculate the necessary space aligned to large page size */
+	size = node_memmap_size_bytes(nid, start_pfn, end_pfn);
+	size += ALIGN(sizeof(pg_data_t), PAGE_SIZE);
+	size = ALIGN(size, LARGE_PAGE_BYTES);
+
+	/* allocate node memory and the lowmem remap area */
+	node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES);
+	if (node_pa == MEMBLOCK_ERROR) {
+		pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n",
+			   size, nid);
+		return;
+	}
+	memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
+
+	remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
+					  max_low_pfn << PAGE_SHIFT,
+					  size, LARGE_PAGE_BYTES);
+	if (remap_pa == MEMBLOCK_ERROR) {
+		pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
+			   size, nid);
+		memblock_x86_free_range(node_pa, node_pa + size);
+		return;
+	}
+	memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
+	remap_va = phys_to_virt(remap_pa);
+
+	/* perform actual remap */
+	for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE)
+		set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT),
+			    (node_pa >> PAGE_SHIFT) + pfn,
+			    PAGE_KERNEL_LARGE);
+
+	/* initialize remap allocator parameters */
+	node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT;
+	node_remap_start_vaddr[nid] = remap_va;
+	node_remap_end_vaddr[nid] = remap_va + size;
+	node_remap_alloc_vaddr[nid] = remap_va;
+
+	printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n",
+	       nid, node_pa, node_pa + size, remap_va, remap_va + size);
 }
 
 void __init initmem_init(void)
 {
-	int nid;
-	long kva_target_pfn;
-
-	/*
-	 * When mapping a NUMA machine we allocate the node_mem_map arrays
-	 * from node local memory.  They are then mapped directly into KVA
-	 * between zone normal and vmalloc space.  Calculate the size of
-	 * this space and use it to adjust the boundary between ZONE_NORMAL
-	 * and ZONE_HIGHMEM.
-	 */
-
-	get_memcfg_numa();
-	numa_init_array();
-
-	kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE);
+	x86_numa_init();
 
-	kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
-	do {
-		kva_start_pfn = memblock_find_in_range(kva_target_pfn<<PAGE_SHIFT,
-					max_low_pfn<<PAGE_SHIFT,
-					kva_pages<<PAGE_SHIFT,
-					PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
-		kva_target_pfn -= PTRS_PER_PTE;
-	} while (kva_start_pfn == MEMBLOCK_ERROR && kva_target_pfn > min_low_pfn);
-
-	if (kva_start_pfn == MEMBLOCK_ERROR)
-		panic("Can not get kva space\n");
-
-	printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
-		kva_start_pfn, max_low_pfn);
-	printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
-
-	/* avoid clash with initrd */
-	memblock_x86_reserve_range(kva_start_pfn<<PAGE_SHIFT,
-		      (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
-		     "KVA PG");
 #ifdef CONFIG_HIGHMEM
 	highstart_pfn = highend_pfn = max_pfn;
 	if (max_pfn > max_low_pfn)
@@ -409,51 +257,9 @@ void __init initmem_init(void)
 
 	printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
 			(ulong) pfn_to_kaddr(max_low_pfn));
-	for_each_online_node(nid) {
-		init_remap_allocator(nid);
-
-		allocate_pgdat(nid);
-	}
-	remap_numa_kva();
 
 	printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
 			(ulong) pfn_to_kaddr(highstart_pfn));
-	for_each_online_node(nid)
-		propagate_e820_map_node(nid);
-
-	for_each_online_node(nid) {
-		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
-		NODE_DATA(nid)->node_id = nid;
-	}
 
 	setup_bootmem_allocator();
 }
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-static int paddr_to_nid(u64 addr)
-{
-	int nid;
-	unsigned long pfn = PFN_DOWN(addr);
-
-	for_each_node(nid)
-		if (node_start_pfn[nid] <= pfn &&
-		    pfn < node_end_pfn[nid])
-			return nid;
-
-	return -1;
-}
-
-/*
- * This function is used to ask node id BEFORE memmap and mem_section's
- * initialization (pfn_to_nid() can't be used yet).
- * If _PXM is not defined on ACPI's DSDT, node id must be found by this.
- */
-int memory_add_physaddr_to_nid(u64 addr)
-{
-	int nid = paddr_to_nid(addr);
-	return (nid >= 0) ? nid : 0;
-}
-
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
-
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index e8c00cc7203..dd27f401f0a 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -2,646 +2,13 @@
  * Generic VM initialization for x86-64 NUMA setups.
  * Copyright 2002,2003 Andi Kleen, SuSE Labs.
  */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/memblock.h>
-#include <linux/mmzone.h>
-#include <linux/ctype.h>
-#include <linux/module.h>
-#include <linux/nodemask.h>
-#include <linux/sched.h>
-#include <linux/acpi.h>
-
-#include <asm/e820.h>
-#include <asm/proto.h>
-#include <asm/dma.h>
-#include <asm/acpi.h>
-#include <asm/amd_nb.h>
 
 #include "numa_internal.h"
 
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
-
-nodemask_t numa_nodes_parsed __initdata;
-
-struct memnode memnode;
-
-static unsigned long __initdata nodemap_addr;
-static unsigned long __initdata nodemap_size;
-
-static struct numa_meminfo numa_meminfo __initdata;
-
-static int numa_distance_cnt;
-static u8 *numa_distance;
-
-/*
- * Given a shift value, try to populate memnodemap[]
- * Returns :
- * 1 if OK
- * 0 if memnodmap[] too small (of shift too small)
- * -1 if node overlap or lost ram (shift too big)
- */
-static int __init populate_memnodemap(const struct numa_meminfo *mi, int shift)
-{
-	unsigned long addr, end;
-	int i, res = -1;
-
-	memset(memnodemap, 0xff, sizeof(s16)*memnodemapsize);
-	for (i = 0; i < mi->nr_blks; i++) {
-		addr = mi->blk[i].start;
-		end = mi->blk[i].end;
-		if (addr >= end)
-			continue;
-		if ((end >> shift) >= memnodemapsize)
-			return 0;
-		do {
-			if (memnodemap[addr >> shift] != NUMA_NO_NODE)
-				return -1;
-			memnodemap[addr >> shift] = mi->blk[i].nid;
-			addr += (1UL << shift);
-		} while (addr < end);
-		res = 1;
-	}
-	return res;
-}
-
-static int __init allocate_cachealigned_memnodemap(void)
-{
-	unsigned long addr;
-
-	memnodemap = memnode.embedded_map;
-	if (memnodemapsize <= ARRAY_SIZE(memnode.embedded_map))
-		return 0;
-
-	addr = 0x8000;
-	nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
-	nodemap_addr = memblock_find_in_range(addr, get_max_mapped(),
-				      nodemap_size, L1_CACHE_BYTES);
-	if (nodemap_addr == MEMBLOCK_ERROR) {
-		printk(KERN_ERR
-		       "NUMA: Unable to allocate Memory to Node hash map\n");
-		nodemap_addr = nodemap_size = 0;
-		return -1;
-	}
-	memnodemap = phys_to_virt(nodemap_addr);
-	memblock_x86_reserve_range(nodemap_addr, nodemap_addr + nodemap_size, "MEMNODEMAP");
-
-	printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n",
-	       nodemap_addr, nodemap_addr + nodemap_size);
-	return 0;
-}
-
-/*
- * The LSB of all start and end addresses in the node map is the value of the
- * maximum possible shift.
- */
-static int __init extract_lsb_from_nodes(const struct numa_meminfo *mi)
-{
-	int i, nodes_used = 0;
-	unsigned long start, end;
-	unsigned long bitfield = 0, memtop = 0;
-
-	for (i = 0; i < mi->nr_blks; i++) {
-		start = mi->blk[i].start;
-		end = mi->blk[i].end;
-		if (start >= end)
-			continue;
-		bitfield |= start;
-		nodes_used++;
-		if (end > memtop)
-			memtop = end;
-	}
-	if (nodes_used <= 1)
-		i = 63;
-	else
-		i = find_first_bit(&bitfield, sizeof(unsigned long)*8);
-	memnodemapsize = (memtop >> i)+1;
-	return i;
-}
-
-static int __init compute_hash_shift(const struct numa_meminfo *mi)
-{
-	int shift;
-
-	shift = extract_lsb_from_nodes(mi);
-	if (allocate_cachealigned_memnodemap())
-		return -1;
-	printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n",
-		shift);
-
-	if (populate_memnodemap(mi, shift) != 1) {
-		printk(KERN_INFO "Your memory is not aligned you need to "
-		       "rebuild your kernel with a bigger NODEMAPSIZE "
-		       "shift=%d\n", shift);
-		return -1;
-	}
-	return shift;
-}
-
-int __meminit  __early_pfn_to_nid(unsigned long pfn)
-{
-	return phys_to_nid(pfn << PAGE_SHIFT);
-}
-
-static void * __init early_node_mem(int nodeid, unsigned long start,
-				    unsigned long end, unsigned long size,
-				    unsigned long align)
-{
-	unsigned long mem;
-
-	/*
-	 * put it on high as possible
-	 * something will go with NODE_DATA
-	 */
-	if (start < (MAX_DMA_PFN<<PAGE_SHIFT))
-		start = MAX_DMA_PFN<<PAGE_SHIFT;
-	if (start < (MAX_DMA32_PFN<<PAGE_SHIFT) &&
-	    end > (MAX_DMA32_PFN<<PAGE_SHIFT))
-		start = MAX_DMA32_PFN<<PAGE_SHIFT;
-	mem = memblock_x86_find_in_range_node(nodeid, start, end, size, align);
-	if (mem != MEMBLOCK_ERROR)
-		return __va(mem);
-
-	/* extend the search scope */
-	end = max_pfn_mapped << PAGE_SHIFT;
-	start = MAX_DMA_PFN << PAGE_SHIFT;
-	mem = memblock_find_in_range(start, end, size, align);
-	if (mem != MEMBLOCK_ERROR)
-		return __va(mem);
-
-	printk(KERN_ERR "Cannot find %lu bytes in node %d\n",
-		       size, nodeid);
-
-	return NULL;
-}
-
-static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
-				     struct numa_meminfo *mi)
-{
-	/* ignore zero length blks */
-	if (start == end)
-		return 0;
-
-	/* whine about and ignore invalid blks */
-	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
-		pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n",
-			   nid, start, end);
-		return 0;
-	}
-
-	if (mi->nr_blks >= NR_NODE_MEMBLKS) {
-		pr_err("NUMA: too many memblk ranges\n");
-		return -EINVAL;
-	}
-
-	mi->blk[mi->nr_blks].start = start;
-	mi->blk[mi->nr_blks].end = end;
-	mi->blk[mi->nr_blks].nid = nid;
-	mi->nr_blks++;
-	return 0;
-}
-
-/**
- * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
- * @idx: Index of memblk to remove
- * @mi: numa_meminfo to remove memblk from
- *
- * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
- * decrementing @mi->nr_blks.
- */
-void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
-{
-	mi->nr_blks--;
-	memmove(&mi->blk[idx], &mi->blk[idx + 1],
-		(mi->nr_blks - idx) * sizeof(mi->blk[0]));
-}
-
-/**
- * numa_add_memblk - Add one numa_memblk to numa_meminfo
- * @nid: NUMA node ID of the new memblk
- * @start: Start address of the new memblk
- * @end: End address of the new memblk
- *
- * Add a new memblk to the default numa_meminfo.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_add_memblk(int nid, u64 start, u64 end)
-{
-	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
-}
-
-/* Initialize bootmem allocator for a node */
-void __init
-setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
-{
-	unsigned long start_pfn, last_pfn, nodedata_phys;
-	const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
-	int nid;
-
-	if (!end)
-		return;
-
-	/*
-	 * Don't confuse VM with a node that doesn't have the
-	 * minimum amount of memory:
-	 */
-	if (end && (end - start) < NODE_MIN_SIZE)
-		return;
-
-	start = roundup(start, ZONE_ALIGN);
-
-	printk(KERN_INFO "Initmem setup node %d %016lx-%016lx\n", nodeid,
-	       start, end);
-
-	start_pfn = start >> PAGE_SHIFT;
-	last_pfn = end >> PAGE_SHIFT;
-
-	node_data[nodeid] = early_node_mem(nodeid, start, end, pgdat_size,
-					   SMP_CACHE_BYTES);
-	if (node_data[nodeid] == NULL)
-		return;
-	nodedata_phys = __pa(node_data[nodeid]);
-	memblock_x86_reserve_range(nodedata_phys, nodedata_phys + pgdat_size, "NODE_DATA");
-	printk(KERN_INFO "  NODE_DATA [%016lx - %016lx]\n", nodedata_phys,
-		nodedata_phys + pgdat_size - 1);
-	nid = phys_to_nid(nodedata_phys);
-	if (nid != nodeid)
-		printk(KERN_INFO "    NODE_DATA(%d) on node %d\n", nodeid, nid);
-
-	memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
-	NODE_DATA(nodeid)->node_id = nodeid;
-	NODE_DATA(nodeid)->node_start_pfn = start_pfn;
-	NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
-
-	node_set_online(nodeid);
-}
-
-/**
- * numa_cleanup_meminfo - Cleanup a numa_meminfo
- * @mi: numa_meminfo to clean up
- *
- * Sanitize @mi by merging and removing unncessary memblks.  Also check for
- * conflicts and clear unused memblks.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
-{
-	const u64 low = 0;
-	const u64 high = (u64)max_pfn << PAGE_SHIFT;
-	int i, j, k;
-
-	for (i = 0; i < mi->nr_blks; i++) {
-		struct numa_memblk *bi = &mi->blk[i];
-
-		/* make sure all blocks are inside the limits */
-		bi->start = max(bi->start, low);
-		bi->end = min(bi->end, high);
-
-		/* and there's no empty block */
-		if (bi->start == bi->end) {
-			numa_remove_memblk_from(i--, mi);
-			continue;
-		}
-
-		for (j = i + 1; j < mi->nr_blks; j++) {
-			struct numa_memblk *bj = &mi->blk[j];
-			unsigned long start, end;
-
-			/*
-			 * See whether there are overlapping blocks.  Whine
-			 * about but allow overlaps of the same nid.  They
-			 * will be merged below.
-			 */
-			if (bi->end > bj->start && bi->start < bj->end) {
-				if (bi->nid != bj->nid) {
-					pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n",
-					       bi->nid, bi->start, bi->end,
-					       bj->nid, bj->start, bj->end);
-					return -EINVAL;
-				}
-				pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n",
-					   bi->nid, bi->start, bi->end,
-					   bj->start, bj->end);
-			}
-
-			/*
-			 * Join together blocks on the same node, holes
-			 * between which don't overlap with memory on other
-			 * nodes.
-			 */
-			if (bi->nid != bj->nid)
-				continue;
-			start = max(min(bi->start, bj->start), low);
-			end = min(max(bi->end, bj->end), high);
-			for (k = 0; k < mi->nr_blks; k++) {
-				struct numa_memblk *bk = &mi->blk[k];
-
-				if (bi->nid == bk->nid)
-					continue;
-				if (start < bk->end && end > bk->start)
-					break;
-			}
-			if (k < mi->nr_blks)
-				continue;
-			printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n",
-			       bi->nid, bi->start, bi->end, bj->start, bj->end,
-			       start, end);
-			bi->start = start;
-			bi->end = end;
-			numa_remove_memblk_from(j--, mi);
-		}
-	}
-
-	for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
-		mi->blk[i].start = mi->blk[i].end = 0;
-		mi->blk[i].nid = NUMA_NO_NODE;
-	}
-
-	return 0;
-}
-
-/*
- * Set nodes, which have memory in @mi, in *@nodemask.
- */
-static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
-					      const struct numa_meminfo *mi)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
-		if (mi->blk[i].start != mi->blk[i].end &&
-		    mi->blk[i].nid != NUMA_NO_NODE)
-			node_set(mi->blk[i].nid, *nodemask);
-}
-
-/**
- * numa_reset_distance - Reset NUMA distance table
- *
- * The current table is freed.  The next numa_set_distance() call will
- * create a new one.
- */
-void __init numa_reset_distance(void)
-{
-	size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
-
-	/* numa_distance could be 1LU marking allocation failure, test cnt */
-	if (numa_distance_cnt)
-		memblock_x86_free_range(__pa(numa_distance),
-					__pa(numa_distance) + size);
-	numa_distance_cnt = 0;
-	numa_distance = NULL;	/* enable table creation */
-}
-
-static int __init numa_alloc_distance(void)
-{
-	nodemask_t nodes_parsed;
-	size_t size;
-	int i, j, cnt = 0;
-	u64 phys;
-
-	/* size the new table and allocate it */
-	nodes_parsed = numa_nodes_parsed;
-	numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
-
-	for_each_node_mask(i, nodes_parsed)
-		cnt = i;
-	cnt++;
-	size = cnt * cnt * sizeof(numa_distance[0]);
-
-	phys = memblock_find_in_range(0, (u64)max_pfn_mapped << PAGE_SHIFT,
-				      size, PAGE_SIZE);
-	if (phys == MEMBLOCK_ERROR) {
-		pr_warning("NUMA: Warning: can't allocate distance table!\n");
-		/* don't retry until explicitly reset */
-		numa_distance = (void *)1LU;
-		return -ENOMEM;
-	}
-	memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
-
-	numa_distance = __va(phys);
-	numa_distance_cnt = cnt;
-
-	/* fill with the default distances */
-	for (i = 0; i < cnt; i++)
-		for (j = 0; j < cnt; j++)
-			numa_distance[i * cnt + j] = i == j ?
-				LOCAL_DISTANCE : REMOTE_DISTANCE;
-	printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
-
-	return 0;
-}
-
-/**
- * numa_set_distance - Set NUMA distance from one NUMA to another
- * @from: the 'from' node to set distance
- * @to: the 'to'  node to set distance
- * @distance: NUMA distance
- *
- * Set the distance from node @from to @to to @distance.  If distance table
- * doesn't exist, one which is large enough to accommodate all the currently
- * known nodes will be created.
- *
- * If such table cannot be allocated, a warning is printed and further
- * calls are ignored until the distance table is reset with
- * numa_reset_distance().
- *
- * If @from or @to is higher than the highest known node at the time of
- * table creation or @distance doesn't make sense, the call is ignored.
- * This is to allow simplification of specific NUMA config implementations.
- */
-void __init numa_set_distance(int from, int to, int distance)
-{
-	if (!numa_distance && numa_alloc_distance() < 0)
-		return;
-
-	if (from >= numa_distance_cnt || to >= numa_distance_cnt) {
-		printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n",
-			    from, to, distance);
-		return;
-	}
-
-	if ((u8)distance != distance ||
-	    (from == to && distance != LOCAL_DISTANCE)) {
-		pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
-			     from, to, distance);
-		return;
-	}
-
-	numa_distance[from * numa_distance_cnt + to] = distance;
-}
-
-int __node_distance(int from, int to)
-{
-	if (from >= numa_distance_cnt || to >= numa_distance_cnt)
-		return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
-	return numa_distance[from * numa_distance_cnt + to];
-}
-EXPORT_SYMBOL(__node_distance);
-
-/*
- * Sanity check to catch more bad NUMA configurations (they are amazingly
- * common).  Make sure the nodes cover all memory.
- */
-static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
-{
-	unsigned long numaram, e820ram;
-	int i;
-
-	numaram = 0;
-	for (i = 0; i < mi->nr_blks; i++) {
-		unsigned long s = mi->blk[i].start >> PAGE_SHIFT;
-		unsigned long e = mi->blk[i].end >> PAGE_SHIFT;
-		numaram += e - s;
-		numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
-		if ((long)numaram < 0)
-			numaram = 0;
-	}
-
-	e820ram = max_pfn - (memblock_x86_hole_size(0,
-					max_pfn << PAGE_SHIFT) >> PAGE_SHIFT);
-	/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
-	if ((long)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
-		printk(KERN_ERR "NUMA: nodes only cover %luMB of your %luMB e820 RAM. Not used.\n",
-		       (numaram << PAGE_SHIFT) >> 20,
-		       (e820ram << PAGE_SHIFT) >> 20);
-		return false;
-	}
-	return true;
-}
-
-static int __init numa_register_memblks(struct numa_meminfo *mi)
-{
-	int i, nid;
-
-	/* Account for nodes with cpus and no memory */
-	node_possible_map = numa_nodes_parsed;
-	numa_nodemask_from_meminfo(&node_possible_map, mi);
-	if (WARN_ON(nodes_empty(node_possible_map)))
-		return -EINVAL;
-
-	memnode_shift = compute_hash_shift(mi);
-	if (memnode_shift < 0) {
-		printk(KERN_ERR "NUMA: No NUMA node hash function found. Contact maintainer\n");
-		return -EINVAL;
-	}
-
-	for (i = 0; i < mi->nr_blks; i++)
-		memblock_x86_register_active_regions(mi->blk[i].nid,
-					mi->blk[i].start >> PAGE_SHIFT,
-					mi->blk[i].end >> PAGE_SHIFT);
-
-	/* for out of order entries */
-	sort_node_map();
-	if (!numa_meminfo_cover_memory(mi))
-		return -EINVAL;
-
-	/* Finally register nodes. */
-	for_each_node_mask(nid, node_possible_map) {
-		u64 start = (u64)max_pfn << PAGE_SHIFT;
-		u64 end = 0;
-
-		for (i = 0; i < mi->nr_blks; i++) {
-			if (nid != mi->blk[i].nid)
-				continue;
-			start = min(mi->blk[i].start, start);
-			end = max(mi->blk[i].end, end);
-		}
-
-		if (start < end)
-			setup_node_bootmem(nid, start, end);
-	}
-
-	return 0;
-}
-
-/**
- * dummy_numma_init - Fallback dummy NUMA init
- *
- * Used if there's no underlying NUMA architecture, NUMA initialization
- * fails, or NUMA is disabled on the command line.
- *
- * Must online at least one node and add memory blocks that cover all
- * allowed memory.  This function must not fail.
- */
-static int __init dummy_numa_init(void)
-{
-	printk(KERN_INFO "%s\n",
-	       numa_off ? "NUMA turned off" : "No NUMA configuration found");
-	printk(KERN_INFO "Faking a node at %016lx-%016lx\n",
-	       0LU, max_pfn << PAGE_SHIFT);
-
-	node_set(0, numa_nodes_parsed);
-	numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT);
-
-	return 0;
-}
-
-static int __init numa_init(int (*init_func)(void))
-{
-	int i;
-	int ret;
-
-	for (i = 0; i < MAX_LOCAL_APIC; i++)
-		set_apicid_to_node(i, NUMA_NO_NODE);
-
-	nodes_clear(numa_nodes_parsed);
-	nodes_clear(node_possible_map);
-	nodes_clear(node_online_map);
-	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-	remove_all_active_ranges();
-	numa_reset_distance();
-
-	ret = init_func();
-	if (ret < 0)
-		return ret;
-	ret = numa_cleanup_meminfo(&numa_meminfo);
-	if (ret < 0)
-		return ret;
-
-	numa_emulation(&numa_meminfo, numa_distance_cnt);
-
-	ret = numa_register_memblks(&numa_meminfo);
-	if (ret < 0)
-		return ret;
-
-	for (i = 0; i < nr_cpu_ids; i++) {
-		int nid = early_cpu_to_node(i);
-
-		if (nid == NUMA_NO_NODE)
-			continue;
-		if (!node_online(nid))
-			numa_clear_node(i);
-	}
-	numa_init_array();
-	return 0;
-}
-
 void __init initmem_init(void)
 {
-	int ret;
-
-	if (!numa_off) {
-#ifdef CONFIG_ACPI_NUMA
-		ret = numa_init(x86_acpi_numa_init);
-		if (!ret)
-			return;
-#endif
-#ifdef CONFIG_AMD_NUMA
-		ret = numa_init(amd_numa_init);
-		if (!ret)
-			return;
-#endif
-	}
-
-	numa_init(dummy_numa_init);
+	x86_numa_init();
 }
 
 unsigned long __init numa_free_all_bootmem(void)
@@ -656,12 +23,3 @@ unsigned long __init numa_free_all_bootmem(void)
 
 	return pages;
 }
-
-int __cpuinit numa_cpu_node(int cpu)
-{
-	int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
-
-	if (apicid != BAD_APICID)
-		return __apicid_to_node[apicid];
-	return NUMA_NO_NODE;
-}
diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c
index ad091e4cff1..d0ed086b624 100644
--- a/arch/x86/mm/numa_emulation.c
+++ b/arch/x86/mm/numa_emulation.c
@@ -5,6 +5,7 @@
 #include <linux/errno.h>
 #include <linux/topology.h>
 #include <linux/memblock.h>
+#include <linux/bootmem.h>
 #include <asm/dma.h>
 
 #include "numa_internal.h"
@@ -84,7 +85,13 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
 		nr_nodes = MAX_NUMNODES;
 	}
 
-	size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / nr_nodes;
+	/*
+	 * Calculate target node size.  x86_32 freaks on __udivdi3() so do
+	 * the division in ulong number of pages and convert back.
+	 */
+	size = max_addr - addr - memblock_x86_hole_size(addr, max_addr);
+	size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes);
+
 	/*
 	 * Calculate the number of big nodes that can be allocated as a result
 	 * of consolidating the remainder.
@@ -226,7 +233,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
 	 */
 	while (nodes_weight(physnode_mask)) {
 		for_each_node_mask(i, physnode_mask) {
-			u64 dma32_end = MAX_DMA32_PFN << PAGE_SHIFT;
+			u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN);
 			u64 start, limit, end;
 			int phys_blk;
 
@@ -298,7 +305,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 {
 	static struct numa_meminfo ei __initdata;
 	static struct numa_meminfo pi __initdata;
-	const u64 max_addr = max_pfn << PAGE_SHIFT;
+	const u64 max_addr = PFN_PHYS(max_pfn);
 	u8 *phys_dist = NULL;
 	size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]);
 	int max_emu_nid, dfl_phys_nid;
@@ -342,8 +349,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
 	if (numa_dist_cnt) {
 		u64 phys;
 
-		phys = memblock_find_in_range(0,
-					      (u64)max_pfn_mapped << PAGE_SHIFT,
+		phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
 					      phys_size, PAGE_SIZE);
 		if (phys == MEMBLOCK_ERROR) {
 			pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");
@@ -454,10 +460,9 @@ void __cpuinit numa_remove_cpu(int cpu)
 		cpumask_clear_cpu(cpu, node_to_cpumask_map[i]);
 }
 #else	/* !CONFIG_DEBUG_PER_CPU_MAPS */
-static void __cpuinit numa_set_cpumask(int cpu, int enable)
+static void __cpuinit numa_set_cpumask(int cpu, bool enable)
 {
-	struct cpumask *mask;
-	int nid, physnid, i;
+	int nid, physnid;
 
 	nid = early_cpu_to_node(cpu);
 	if (nid == NUMA_NO_NODE) {
@@ -467,28 +472,21 @@ static void __cpuinit numa_set_cpumask(int cpu, int enable)
 
 	physnid = emu_nid_to_phys[nid];
 
-	for_each_online_node(i) {
+	for_each_online_node(nid) {
 		if (emu_nid_to_phys[nid] != physnid)
 			continue;
 
-		mask = debug_cpumask_set_cpu(cpu, enable);
-		if (!mask)
-			return;
-
-		if (enable)
-			cpumask_set_cpu(cpu, mask);
-		else
-			cpumask_clear_cpu(cpu, mask);
+		debug_cpumask_set_cpu(cpu, nid, enable);
 	}
 }
 
 void __cpuinit numa_add_cpu(int cpu)
 {
-	numa_set_cpumask(cpu, 1);
+	numa_set_cpumask(cpu, true);
 }
 
 void __cpuinit numa_remove_cpu(int cpu)
 {
-	numa_set_cpumask(cpu, 0);
+	numa_set_cpumask(cpu, false);
 }
 #endif	/* !CONFIG_DEBUG_PER_CPU_MAPS */
diff --git a/arch/x86/mm/numa_internal.h b/arch/x86/mm/numa_internal.h
index ef2d97377d7..7178c3afe05 100644
--- a/arch/x86/mm/numa_internal.h
+++ b/arch/x86/mm/numa_internal.h
@@ -19,6 +19,14 @@ void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi);
 int __init numa_cleanup_meminfo(struct numa_meminfo *mi);
 void __init numa_reset_distance(void);
 
+void __init x86_numa_init(void);
+
+#ifdef CONFIG_X86_64
+static inline void init_alloc_remap(int nid, u64 start, u64 end)	{ }
+#else
+void __init init_alloc_remap(int nid, u64 start, u64 end);
+#endif
+
 #ifdef CONFIG_NUMA_EMU
 void __init numa_emulation(struct numa_meminfo *numa_meminfo,
 			   int numa_dist_cnt);
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat.c
index 8e9d3394f6d..81dbfdeb080 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat.c
@@ -26,8 +26,6 @@
 
 int acpi_numa __initdata;
 
-static struct bootnode nodes_add[MAX_NUMNODES];
-
 static __init int setup_node(int pxm)
 {
 	return acpi_map_pxm_to_node(pxm);
@@ -37,7 +35,6 @@ static __init void bad_srat(void)
 {
 	printk(KERN_ERR "SRAT: SRAT not used.\n");
 	acpi_numa = -1;
-	memset(nodes_add, 0, sizeof(nodes_add));
 }
 
 static __init inline int srat_disabled(void)
@@ -131,73 +128,17 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 	       pxm, apic_id, node);
 }
 
-#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+#ifdef CONFIG_MEMORY_HOTPLUG
 static inline int save_add_info(void) {return 1;}
 #else
 static inline int save_add_info(void) {return 0;}
 #endif
-/*
- * Update nodes_add[]
- * This code supports one contiguous hot add area per node
- */
-static void __init
-update_nodes_add(int node, unsigned long start, unsigned long end)
-{
-	unsigned long s_pfn = start >> PAGE_SHIFT;
-	unsigned long e_pfn = end >> PAGE_SHIFT;
-	int changed = 0;
-	struct bootnode *nd = &nodes_add[node];
-
-	/* I had some trouble with strange memory hotadd regions breaking
-	   the boot. Be very strict here and reject anything unexpected.
-	   If you want working memory hotadd write correct SRATs.
-
-	   The node size check is a basic sanity check to guard against
-	   mistakes */
-	if ((signed long)(end - start) < NODE_MIN_SIZE) {
-		printk(KERN_ERR "SRAT: Hotplug area too small\n");
-		return;
-	}
-
-	/* This check might be a bit too strict, but I'm keeping it for now. */
-	if (absent_pages_in_range(s_pfn, e_pfn) != e_pfn - s_pfn) {
-		printk(KERN_ERR
-			"SRAT: Hotplug area %lu -> %lu has existing memory\n",
-			s_pfn, e_pfn);
-		return;
-	}
-
-	/* Looks good */
-
-	if (nd->start == nd->end) {
-		nd->start = start;
-		nd->end = end;
-		changed = 1;
-	} else {
-		if (nd->start == end) {
-			nd->start = start;
-			changed = 1;
-		}
-		if (nd->end == start) {
-			nd->end = end;
-			changed = 1;
-		}
-		if (!changed)
-			printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
-	}
-
-	if (changed) {
-		node_set(node, numa_nodes_parsed);
-		printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
-				 nd->start, nd->end);
-	}
-}
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
 void __init
 acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 {
-	unsigned long start, end;
+	u64 start, end;
 	int node, pxm;
 
 	if (srat_disabled())
@@ -226,11 +167,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 		return;
 	}
 
-	printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm,
+	printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
 	       start, end);
-
-	if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)
-		update_nodes_add(node, start, end);
 }
 
 void __init acpi_numa_arch_fixup(void) {}
@@ -244,17 +182,3 @@ int __init x86_acpi_numa_init(void)
 		return ret;
 	return srat_disabled() ? -EINVAL : 0;
 }
-
-#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY)
-int memory_add_physaddr_to_nid(u64 start)
-{
-	int i, ret = 0;
-
-	for_each_node(i)
-		if (nodes_add[i].start <= start && nodes_add[i].end > start)
-			ret = i;
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
deleted file mode 100644
index 48651c6f657..00000000000
--- a/arch/x86/mm/srat_32.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Some of the code in this file has been gleaned from the 64 bit 
- * discontigmem support code base.
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.          
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to Pat Gaughen <gone@us.ibm.com>
- */
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/memblock.h>
-#include <linux/mmzone.h>
-#include <linux/acpi.h>
-#include <linux/nodemask.h>
-#include <asm/srat.h>
-#include <asm/topology.h>
-#include <asm/smp.h>
-#include <asm/e820.h>
-
-/*
- * proximity macros and definitions
- */
-#define NODE_ARRAY_INDEX(x)	((x) / 8)	/* 8 bits/char */
-#define NODE_ARRAY_OFFSET(x)	((x) % 8)	/* 8 bits/char */
-#define BMAP_SET(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit))
-#define BMAP_TEST(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
-/* bitmap length; _PXM is at most 255 */
-#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) 
-static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN];	/* bitmap of proximity domains */
-
-#define MAX_CHUNKS_PER_NODE	3
-#define MAXCHUNKS		(MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
-struct node_memory_chunk_s {
-	unsigned long	start_pfn;
-	unsigned long	end_pfn;
-	u8	pxm;		// proximity domain of node
-	u8	nid;		// which cnode contains this chunk?
-	u8	bank;		// which mem bank on this node
-};
-static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS];
-
-static int __initdata num_memory_chunks; /* total number of memory chunks */
-static u8 __initdata apicid_to_pxm[MAX_LOCAL_APIC];
-
-int acpi_numa __initdata;
-
-static __init void bad_srat(void)
-{
-        printk(KERN_ERR "SRAT: SRAT not used.\n");
-        acpi_numa = -1;
-	num_memory_chunks = 0;
-}
-
-static __init inline int srat_disabled(void)
-{
-	return numa_off || acpi_numa < 0;
-}
-
-/* Identify CPU proximity domains */
-void __init
-acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity)
-{
-	if (srat_disabled())
-		return;
-	if (cpu_affinity->header.length !=
-	     sizeof(struct acpi_srat_cpu_affinity)) {
-		bad_srat();
-		return;
-	}
-
-	if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
-		return;		/* empty entry */
-
-	/* mark this node as "seen" in node bitmap */
-	BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
-
-	/* don't need to check apic_id here, because it is always 8 bits */
-	apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
-
-	printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
-		cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
-}
-
-/*
- * Identify memory proximity domains and hot-remove capabilities.
- * Fill node memory chunk list structure.
- */
-void __init
-acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity)
-{
-	unsigned long long paddr, size;
-	unsigned long start_pfn, end_pfn;
-	u8 pxm;
-	struct node_memory_chunk_s *p, *q, *pend;
-
-	if (srat_disabled())
-		return;
-	if (memory_affinity->header.length !=
-	     sizeof(struct acpi_srat_mem_affinity)) {
-		bad_srat();
-		return;
-	}
-
-	if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
-		return;		/* empty entry */
-
-	pxm = memory_affinity->proximity_domain & 0xff;
-
-	/* mark this node as "seen" in node bitmap */
-	BMAP_SET(pxm_bitmap, pxm);
-
-	/* calculate info for memory chunk structure */
-	paddr = memory_affinity->base_address;
-	size = memory_affinity->length;
-
-	start_pfn = paddr >> PAGE_SHIFT;
-	end_pfn = (paddr + size) >> PAGE_SHIFT;
-
-
-	if (num_memory_chunks >= MAXCHUNKS) {
-		printk(KERN_WARNING "Too many mem chunks in SRAT."
-			" Ignoring %lld MBytes at %llx\n",
-			size/(1024*1024), paddr);
-		return;
-	}
-
-	/* Insertion sort based on base address */
-	pend = &node_memory_chunk[num_memory_chunks];
-	for (p = &node_memory_chunk[0]; p < pend; p++) {
-		if (start_pfn < p->start_pfn)
-			break;
-	}
-	if (p < pend) {
-		for (q = pend; q >= p; q--)
-			*(q + 1) = *q;
-	}
-	p->start_pfn = start_pfn;
-	p->end_pfn = end_pfn;
-	p->pxm = pxm;
-
-	num_memory_chunks++;
-
-	printk(KERN_DEBUG "Memory range %08lx to %08lx"
-			  " in proximity domain %02x %s\n",
-		start_pfn, end_pfn,
-		pxm,
-		((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
-		 "enabled and removable" : "enabled" ) );
-}
-
-/* Callback for SLIT parsing */
-void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
-{
-}
-
-void acpi_numa_arch_fixup(void)
-{
-}
-/*
- * The SRAT table always lists ascending addresses, so can always
- * assume that the first "start" address that you see is the real
- * start of the node, and that the current "end" address is after
- * the previous one.
- */
-static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
-{
-	/*
-	 * Only add present memory as told by the e820.
-	 * There is no guarantee from the SRAT that the memory it
-	 * enumerates is present at boot time because it represents
-	 * *possible* memory hotplug areas the same as normal RAM.
-	 */
-	if (memory_chunk->start_pfn >= max_pfn) {
-		printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
-			memory_chunk->start_pfn, memory_chunk->end_pfn);
-		return -1;
-	}
-	if (memory_chunk->nid != nid)
-		return -1;
-
-	if (!node_has_online_mem(nid))
-		node_start_pfn[nid] = memory_chunk->start_pfn;
-
-	if (node_start_pfn[nid] > memory_chunk->start_pfn)
-		node_start_pfn[nid] = memory_chunk->start_pfn;
-
-	if (node_end_pfn[nid] < memory_chunk->end_pfn)
-		node_end_pfn[nid] = memory_chunk->end_pfn;
-
-	return 0;
-}
-
-int __init get_memcfg_from_srat(void)
-{
-	int i, j, nid;
-
-
-	if (srat_disabled())
-		goto out_fail;
-
-	if (num_memory_chunks == 0) {
-		printk(KERN_DEBUG
-			 "could not find any ACPI SRAT memory areas.\n");
-		goto out_fail;
-	}
-
-	/* Calculate total number of nodes in system from PXM bitmap and create
-	 * a set of sequential node IDs starting at zero.  (ACPI doesn't seem
-	 * to specify the range of _PXM values.)
-	 */
-	/*
-	 * MCD - we no longer HAVE to number nodes sequentially.  PXM domain
-	 * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically
-	 * 32, so we will continue numbering them in this manner until MAX_NUMNODES
-	 * approaches MAX_PXM_DOMAINS for i386.
-	 */
-	nodes_clear(node_online_map);
-	for (i = 0; i < MAX_PXM_DOMAINS; i++) {
-		if (BMAP_TEST(pxm_bitmap, i)) {
-			int nid = acpi_map_pxm_to_node(i);
-			node_set_online(nid);
-		}
-	}
-	BUG_ON(num_online_nodes() == 0);
-
-	/* set cnode id in memory chunk structure */
-	for (i = 0; i < num_memory_chunks; i++)
-		node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm);
-
-	printk(KERN_DEBUG "pxm bitmap: ");
-	for (i = 0; i < sizeof(pxm_bitmap); i++) {
-		printk(KERN_CONT "%02x ", pxm_bitmap[i]);
-	}
-	printk(KERN_CONT "\n");
-	printk(KERN_DEBUG "Number of logical nodes in system = %d\n",
-			 num_online_nodes());
-	printk(KERN_DEBUG "Number of memory chunks in system = %d\n",
-			 num_memory_chunks);
-
-	for (i = 0; i < MAX_LOCAL_APIC; i++)
-		set_apicid_to_node(i, pxm_to_node(apicid_to_pxm[i]));
-
-	for (j = 0; j < num_memory_chunks; j++){
-		struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
-		printk(KERN_DEBUG
-			"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
-		       j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
-		if (node_read_chunk(chunk->nid, chunk))
-			continue;
-
-		memblock_x86_register_active_regions(chunk->nid, chunk->start_pfn,
-					     min(chunk->end_pfn, max_pfn));
-	}
-	/* for out of order entries in SRAT */
-	sort_node_map();
-
-	for_each_online_node(nid) {
-		unsigned long start = node_start_pfn[nid];
-		unsigned long end = min(node_end_pfn[nid], max_pfn);
-
-		memory_present(nid, start, end);
-		node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
-	}
-	return 1;
-out_fail:
-	printk(KERN_DEBUG "failed to get NUMA memory information from SRAT"
-			" table\n");
-	return 0;
-}
diff --git a/arch/x86/net/Makefile b/arch/x86/net/Makefile
new file mode 100644
index 00000000000..90568c33ddb
--- /dev/null
+++ b/arch/x86/net/Makefile
@@ -0,0 +1,4 @@
+#
+# Arch-specific network modules
+#
+obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_comp.o
diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
new file mode 100644
index 00000000000..66870223f8c
--- /dev/null
+++ b/arch/x86/net/bpf_jit.S
@@ -0,0 +1,140 @@
+/* bpf_jit.S : BPF JIT helper functions
+ *
+ * Copyright (C) 2011 Eric Dumazet (eric.dumazet@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+/*
+ * Calling convention :
+ * rdi : skb pointer
+ * esi : offset of byte(s) to fetch in skb (can be scratched)
+ * r8  : copy of skb->data
+ * r9d : hlen = skb->len - skb->data_len
+ */
+#define SKBDATA	%r8
+
+sk_load_word_ind:
+	.globl	sk_load_word_ind
+
+	add	%ebx,%esi	/* offset += X */
+#	test    %esi,%esi	/* if (offset < 0) goto bpf_error; */
+	js	bpf_error
+
+sk_load_word:
+	.globl	sk_load_word
+
+	mov	%r9d,%eax		# hlen
+	sub	%esi,%eax		# hlen - offset
+	cmp	$3,%eax
+	jle	bpf_slow_path_word
+	mov     (SKBDATA,%rsi),%eax
+	bswap   %eax  			/* ntohl() */
+	ret
+
+
+sk_load_half_ind:
+	.globl sk_load_half_ind
+
+	add	%ebx,%esi	/* offset += X */
+	js	bpf_error
+
+sk_load_half:
+	.globl	sk_load_half
+
+	mov	%r9d,%eax
+	sub	%esi,%eax		#	hlen - offset
+	cmp	$1,%eax
+	jle	bpf_slow_path_half
+	movzwl	(SKBDATA,%rsi),%eax
+	rol	$8,%ax			# ntohs()
+	ret
+
+sk_load_byte_ind:
+	.globl sk_load_byte_ind
+	add	%ebx,%esi	/* offset += X */
+	js	bpf_error
+
+sk_load_byte:
+	.globl	sk_load_byte
+
+	cmp	%esi,%r9d   /* if (offset >= hlen) goto bpf_slow_path_byte */
+	jle	bpf_slow_path_byte
+	movzbl	(SKBDATA,%rsi),%eax
+	ret
+
+/**
+ * sk_load_byte_msh - BPF_S_LDX_B_MSH helper
+ *
+ * Implements BPF_S_LDX_B_MSH : ldxb  4*([offset]&0xf)
+ * Must preserve A accumulator (%eax)
+ * Inputs : %esi is the offset value, already known positive
+ */
+ENTRY(sk_load_byte_msh)
+	CFI_STARTPROC
+	cmp	%esi,%r9d      /* if (offset >= hlen) goto bpf_slow_path_byte_msh */
+	jle	bpf_slow_path_byte_msh
+	movzbl	(SKBDATA,%rsi),%ebx
+	and	$15,%bl
+	shl	$2,%bl
+	ret
+	CFI_ENDPROC
+ENDPROC(sk_load_byte_msh)
+
+bpf_error:
+# force a return 0 from jit handler
+	xor		%eax,%eax
+	mov		-8(%rbp),%rbx
+	leaveq
+	ret
+
+/* rsi contains offset and can be scratched */
+#define bpf_slow_path_common(LEN)		\
+	push	%rdi;    /* save skb */		\
+	push	%r9;				\
+	push	SKBDATA;			\
+/* rsi already has offset */			\
+	mov	$LEN,%ecx;	/* len */	\
+	lea	-12(%rbp),%rdx;			\
+	call	skb_copy_bits;			\
+	test    %eax,%eax;			\
+	pop	SKBDATA;			\
+	pop	%r9;				\
+	pop	%rdi
+
+
+bpf_slow_path_word:
+	bpf_slow_path_common(4)
+	js	bpf_error
+	mov	-12(%rbp),%eax
+	bswap	%eax
+	ret
+
+bpf_slow_path_half:
+	bpf_slow_path_common(2)
+	js	bpf_error
+	mov	-12(%rbp),%ax
+	rol	$8,%ax
+	movzwl	%ax,%eax
+	ret
+
+bpf_slow_path_byte:
+	bpf_slow_path_common(1)
+	js	bpf_error
+	movzbl	-12(%rbp),%eax
+	ret
+
+bpf_slow_path_byte_msh:
+	xchg	%eax,%ebx /* dont lose A , X is about to be scratched */
+	bpf_slow_path_common(1)
+	js	bpf_error
+	movzbl	-12(%rbp),%eax
+	and	$15,%al
+	shl	$2,%al
+	xchg	%eax,%ebx
+	ret
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
new file mode 100644
index 00000000000..bfab3fa10ed
--- /dev/null
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -0,0 +1,654 @@
+/* bpf_jit_comp.c : BPF JIT compiler
+ *
+ * Copyright (C) 2011 Eric Dumazet (eric.dumazet@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/moduleloader.h>
+#include <asm/cacheflush.h>
+#include <linux/netdevice.h>
+#include <linux/filter.h>
+
+/*
+ * Conventions :
+ *  EAX : BPF A accumulator
+ *  EBX : BPF X accumulator
+ *  RDI : pointer to skb   (first argument given to JIT function)
+ *  RBP : frame pointer (even if CONFIG_FRAME_POINTER=n)
+ *  ECX,EDX,ESI : scratch registers
+ *  r9d : skb->len - skb->data_len (headlen)
+ *  r8  : skb->data
+ * -8(RBP) : saved RBX value
+ * -16(RBP)..-80(RBP) : BPF_MEMWORDS values
+ */
+int bpf_jit_enable __read_mostly;
+
+/*
+ * assembly code in arch/x86/net/bpf_jit.S
+ */
+extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+extern u8 sk_load_word_ind[], sk_load_half_ind[], sk_load_byte_ind[];
+
+static inline u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
+{
+	if (len == 1)
+		*ptr = bytes;
+	else if (len == 2)
+		*(u16 *)ptr = bytes;
+	else {
+		*(u32 *)ptr = bytes;
+		barrier();
+	}
+	return ptr + len;
+}
+
+#define EMIT(bytes, len)	do { prog = emit_code(prog, bytes, len); } while (0)
+
+#define EMIT1(b1)		EMIT(b1, 1)
+#define EMIT2(b1, b2)		EMIT((b1) + ((b2) << 8), 2)
+#define EMIT3(b1, b2, b3)	EMIT((b1) + ((b2) << 8) + ((b3) << 16), 3)
+#define EMIT4(b1, b2, b3, b4)   EMIT((b1) + ((b2) << 8) + ((b3) << 16) + ((b4) << 24), 4)
+#define EMIT1_off32(b1, off)	do { EMIT1(b1); EMIT(off, 4);} while (0)
+
+#define CLEAR_A() EMIT2(0x31, 0xc0) /* xor %eax,%eax */
+#define CLEAR_X() EMIT2(0x31, 0xdb) /* xor %ebx,%ebx */
+
+static inline bool is_imm8(int value)
+{
+	return value <= 127 && value >= -128;
+}
+
+static inline bool is_near(int offset)
+{
+	return offset <= 127 && offset >= -128;
+}
+
+#define EMIT_JMP(offset)						\
+do {									\
+	if (offset) {							\
+		if (is_near(offset))					\
+			EMIT2(0xeb, offset); /* jmp .+off8 */		\
+		else							\
+			EMIT1_off32(0xe9, offset); /* jmp .+off32 */	\
+	}								\
+} while (0)
+
+/* list of x86 cond jumps opcodes (. + s8)
+ * Add 0x10 (and an extra 0x0f) to generate far jumps (. + s32)
+ */
+#define X86_JB  0x72
+#define X86_JAE 0x73
+#define X86_JE  0x74
+#define X86_JNE 0x75
+#define X86_JBE 0x76
+#define X86_JA  0x77
+
+#define EMIT_COND_JMP(op, offset)				\
+do {								\
+	if (is_near(offset))					\
+		EMIT2(op, offset); /* jxx .+off8 */		\
+	else {							\
+		EMIT2(0x0f, op + 0x10);				\
+		EMIT(offset, 4); /* jxx .+off32 */		\
+	}							\
+} while (0)
+
+#define COND_SEL(CODE, TOP, FOP)	\
+	case CODE:			\
+		t_op = TOP;		\
+		f_op = FOP;		\
+		goto cond_branch
+
+
+#define SEEN_DATAREF 1 /* might call external helpers */
+#define SEEN_XREG    2 /* ebx is used */
+#define SEEN_MEM     4 /* use mem[] for temporary storage */
+
+static inline void bpf_flush_icache(void *start, void *end)
+{
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(KERNEL_DS);
+	smp_wmb();
+	flush_icache_range((unsigned long)start, (unsigned long)end);
+	set_fs(old_fs);
+}
+
+
+void bpf_jit_compile(struct sk_filter *fp)
+{
+	u8 temp[64];
+	u8 *prog;
+	unsigned int proglen, oldproglen = 0;
+	int ilen, i;
+	int t_offset, f_offset;
+	u8 t_op, f_op, seen = 0, pass;
+	u8 *image = NULL;
+	u8 *func;
+	int pc_ret0 = -1; /* bpf index of first RET #0 instruction (if any) */
+	unsigned int cleanup_addr; /* epilogue code offset */
+	unsigned int *addrs;
+	const struct sock_filter *filter = fp->insns;
+	int flen = fp->len;
+
+	if (!bpf_jit_enable)
+		return;
+
+	addrs = kmalloc(flen * sizeof(*addrs), GFP_KERNEL);
+	if (addrs == NULL)
+		return;
+
+	/* Before first pass, make a rough estimation of addrs[]
+	 * each bpf instruction is translated to less than 64 bytes
+	 */
+	for (proglen = 0, i = 0; i < flen; i++) {
+		proglen += 64;
+		addrs[i] = proglen;
+	}
+	cleanup_addr = proglen; /* epilogue address */
+
+	for (pass = 0; pass < 10; pass++) {
+		/* no prologue/epilogue for trivial filters (RET something) */
+		proglen = 0;
+		prog = temp;
+
+		if (seen) {
+			EMIT4(0x55, 0x48, 0x89, 0xe5); /* push %rbp; mov %rsp,%rbp */
+			EMIT4(0x48, 0x83, 0xec, 96);	/* subq  $96,%rsp	*/
+			/* note : must save %rbx in case bpf_error is hit */
+			if (seen & (SEEN_XREG | SEEN_DATAREF))
+				EMIT4(0x48, 0x89, 0x5d, 0xf8); /* mov %rbx, -8(%rbp) */
+			if (seen & SEEN_XREG)
+				CLEAR_X(); /* make sure we dont leek kernel memory */
+
+			/*
+			 * If this filter needs to access skb data,
+			 * loads r9 and r8 with :
+			 *  r9 = skb->len - skb->data_len
+			 *  r8 = skb->data
+			 */
+			if (seen & SEEN_DATAREF) {
+				if (offsetof(struct sk_buff, len) <= 127)
+					/* mov    off8(%rdi),%r9d */
+					EMIT4(0x44, 0x8b, 0x4f, offsetof(struct sk_buff, len));
+				else {
+					/* mov    off32(%rdi),%r9d */
+					EMIT3(0x44, 0x8b, 0x8f);
+					EMIT(offsetof(struct sk_buff, len), 4);
+				}
+				if (is_imm8(offsetof(struct sk_buff, data_len)))
+					/* sub    off8(%rdi),%r9d */
+					EMIT4(0x44, 0x2b, 0x4f, offsetof(struct sk_buff, data_len));
+				else {
+					EMIT3(0x44, 0x2b, 0x8f);
+					EMIT(offsetof(struct sk_buff, data_len), 4);
+				}
+
+				if (is_imm8(offsetof(struct sk_buff, data)))
+					/* mov off8(%rdi),%r8 */
+					EMIT4(0x4c, 0x8b, 0x47, offsetof(struct sk_buff, data));
+				else {
+					/* mov off32(%rdi),%r8 */
+					EMIT3(0x4c, 0x8b, 0x87);
+					EMIT(offsetof(struct sk_buff, data), 4);
+				}
+			}
+		}
+
+		switch (filter[0].code) {
+		case BPF_S_RET_K:
+		case BPF_S_LD_W_LEN:
+		case BPF_S_ANC_PROTOCOL:
+		case BPF_S_ANC_IFINDEX:
+		case BPF_S_ANC_MARK:
+		case BPF_S_ANC_RXHASH:
+		case BPF_S_ANC_CPU:
+		case BPF_S_ANC_QUEUE:
+		case BPF_S_LD_W_ABS:
+		case BPF_S_LD_H_ABS:
+		case BPF_S_LD_B_ABS:
+			/* first instruction sets A register (or is RET 'constant') */
+			break;
+		default:
+			/* make sure we dont leak kernel information to user */
+			CLEAR_A(); /* A = 0 */
+		}
+
+		for (i = 0; i < flen; i++) {
+			unsigned int K = filter[i].k;
+
+			switch (filter[i].code) {
+			case BPF_S_ALU_ADD_X: /* A += X; */
+				seen |= SEEN_XREG;
+				EMIT2(0x01, 0xd8);		/* add %ebx,%eax */
+				break;
+			case BPF_S_ALU_ADD_K: /* A += K; */
+				if (!K)
+					break;
+				if (is_imm8(K))
+					EMIT3(0x83, 0xc0, K);	/* add imm8,%eax */
+				else
+					EMIT1_off32(0x05, K);	/* add imm32,%eax */
+				break;
+			case BPF_S_ALU_SUB_X: /* A -= X; */
+				seen |= SEEN_XREG;
+				EMIT2(0x29, 0xd8);		/* sub    %ebx,%eax */
+				break;
+			case BPF_S_ALU_SUB_K: /* A -= K */
+				if (!K)
+					break;
+				if (is_imm8(K))
+					EMIT3(0x83, 0xe8, K); /* sub imm8,%eax */
+				else
+					EMIT1_off32(0x2d, K); /* sub imm32,%eax */
+				break;
+			case BPF_S_ALU_MUL_X: /* A *= X; */
+				seen |= SEEN_XREG;
+				EMIT3(0x0f, 0xaf, 0xc3);	/* imul %ebx,%eax */
+				break;
+			case BPF_S_ALU_MUL_K: /* A *= K */
+				if (is_imm8(K))
+					EMIT3(0x6b, 0xc0, K); /* imul imm8,%eax,%eax */
+				else {
+					EMIT2(0x69, 0xc0);		/* imul imm32,%eax */
+					EMIT(K, 4);
+				}
+				break;
+			case BPF_S_ALU_DIV_X: /* A /= X; */
+				seen |= SEEN_XREG;
+				EMIT2(0x85, 0xdb);	/* test %ebx,%ebx */
+				if (pc_ret0 != -1)
+					EMIT_COND_JMP(X86_JE, addrs[pc_ret0] - (addrs[i] - 4));
+				else {
+					EMIT_COND_JMP(X86_JNE, 2 + 5);
+					CLEAR_A();
+					EMIT1_off32(0xe9, cleanup_addr - (addrs[i] - 4)); /* jmp .+off32 */
+				}
+				EMIT4(0x31, 0xd2, 0xf7, 0xf3); /* xor %edx,%edx; div %ebx */
+				break;
+			case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
+				EMIT3(0x48, 0x69, 0xc0); /* imul imm32,%rax,%rax */
+				EMIT(K, 4);
+				EMIT4(0x48, 0xc1, 0xe8, 0x20); /* shr $0x20,%rax */
+				break;
+			case BPF_S_ALU_AND_X:
+				seen |= SEEN_XREG;
+				EMIT2(0x21, 0xd8);		/* and %ebx,%eax */
+				break;
+			case BPF_S_ALU_AND_K:
+				if (K >= 0xFFFFFF00) {
+					EMIT2(0x24, K & 0xFF); /* and imm8,%al */
+				} else if (K >= 0xFFFF0000) {
+					EMIT2(0x66, 0x25);	/* and imm16,%ax */
+					EMIT2(K, 2);
+				} else {
+					EMIT1_off32(0x25, K);	/* and imm32,%eax */
+				}
+				break;
+			case BPF_S_ALU_OR_X:
+				seen |= SEEN_XREG;
+				EMIT2(0x09, 0xd8);		/* or %ebx,%eax */
+				break;
+			case BPF_S_ALU_OR_K:
+				if (is_imm8(K))
+					EMIT3(0x83, 0xc8, K); /* or imm8,%eax */
+				else
+					EMIT1_off32(0x0d, K);	/* or imm32,%eax */
+				break;
+			case BPF_S_ALU_LSH_X: /* A <<= X; */
+				seen |= SEEN_XREG;
+				EMIT4(0x89, 0xd9, 0xd3, 0xe0);	/* mov %ebx,%ecx; shl %cl,%eax */
+				break;
+			case BPF_S_ALU_LSH_K:
+				if (K == 0)
+					break;
+				else if (K == 1)
+					EMIT2(0xd1, 0xe0); /* shl %eax */
+				else
+					EMIT3(0xc1, 0xe0, K);
+				break;
+			case BPF_S_ALU_RSH_X: /* A >>= X; */
+				seen |= SEEN_XREG;
+				EMIT4(0x89, 0xd9, 0xd3, 0xe8);	/* mov %ebx,%ecx; shr %cl,%eax */
+				break;
+			case BPF_S_ALU_RSH_K: /* A >>= K; */
+				if (K == 0)
+					break;
+				else if (K == 1)
+					EMIT2(0xd1, 0xe8); /* shr %eax */
+				else
+					EMIT3(0xc1, 0xe8, K);
+				break;
+			case BPF_S_ALU_NEG:
+				EMIT2(0xf7, 0xd8);		/* neg %eax */
+				break;
+			case BPF_S_RET_K:
+				if (!K) {
+					if (pc_ret0 == -1)
+						pc_ret0 = i;
+					CLEAR_A();
+				} else {
+					EMIT1_off32(0xb8, K);	/* mov $imm32,%eax */
+				}
+				/* fallinto */
+			case BPF_S_RET_A:
+				if (seen) {
+					if (i != flen - 1) {
+						EMIT_JMP(cleanup_addr - addrs[i]);
+						break;
+					}
+					if (seen & SEEN_XREG)
+						EMIT4(0x48, 0x8b, 0x5d, 0xf8);  /* mov  -8(%rbp),%rbx */
+					EMIT1(0xc9);		/* leaveq */
+				}
+				EMIT1(0xc3);		/* ret */
+				break;
+			case BPF_S_MISC_TAX: /* X = A */
+				seen |= SEEN_XREG;
+				EMIT2(0x89, 0xc3);	/* mov    %eax,%ebx */
+				break;
+			case BPF_S_MISC_TXA: /* A = X */
+				seen |= SEEN_XREG;
+				EMIT2(0x89, 0xd8);	/* mov    %ebx,%eax */
+				break;
+			case BPF_S_LD_IMM: /* A = K */
+				if (!K)
+					CLEAR_A();
+				else
+					EMIT1_off32(0xb8, K); /* mov $imm32,%eax */
+				break;
+			case BPF_S_LDX_IMM: /* X = K */
+				seen |= SEEN_XREG;
+				if (!K)
+					CLEAR_X();
+				else
+					EMIT1_off32(0xbb, K); /* mov $imm32,%ebx */
+				break;
+			case BPF_S_LD_MEM: /* A = mem[K] : mov off8(%rbp),%eax */
+				seen |= SEEN_MEM;
+				EMIT3(0x8b, 0x45, 0xf0 - K*4);
+				break;
+			case BPF_S_LDX_MEM: /* X = mem[K] : mov off8(%rbp),%ebx */
+				seen |= SEEN_XREG | SEEN_MEM;
+				EMIT3(0x8b, 0x5d, 0xf0 - K*4);
+				break;
+			case BPF_S_ST: /* mem[K] = A : mov %eax,off8(%rbp) */
+				seen |= SEEN_MEM;
+				EMIT3(0x89, 0x45, 0xf0 - K*4);
+				break;
+			case BPF_S_STX: /* mem[K] = X : mov %ebx,off8(%rbp) */
+				seen |= SEEN_XREG | SEEN_MEM;
+				EMIT3(0x89, 0x5d, 0xf0 - K*4);
+				break;
+			case BPF_S_LD_W_LEN: /*	A = skb->len; */
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
+				if (is_imm8(offsetof(struct sk_buff, len)))
+					/* mov    off8(%rdi),%eax */
+					EMIT3(0x8b, 0x47, offsetof(struct sk_buff, len));
+				else {
+					EMIT2(0x8b, 0x87);
+					EMIT(offsetof(struct sk_buff, len), 4);
+				}
+				break;
+			case BPF_S_LDX_W_LEN: /* X = skb->len; */
+				seen |= SEEN_XREG;
+				if (is_imm8(offsetof(struct sk_buff, len)))
+					/* mov off8(%rdi),%ebx */
+					EMIT3(0x8b, 0x5f, offsetof(struct sk_buff, len));
+				else {
+					EMIT2(0x8b, 0x9f);
+					EMIT(offsetof(struct sk_buff, len), 4);
+				}
+				break;
+			case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol); */
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, protocol) != 2);
+				if (is_imm8(offsetof(struct sk_buff, protocol))) {
+					/* movzwl off8(%rdi),%eax */
+					EMIT4(0x0f, 0xb7, 0x47, offsetof(struct sk_buff, protocol));
+				} else {
+					EMIT3(0x0f, 0xb7, 0x87); /* movzwl off32(%rdi),%eax */
+					EMIT(offsetof(struct sk_buff, protocol), 4);
+				}
+				EMIT2(0x86, 0xc4); /* ntohs() : xchg   %al,%ah */
+				break;
+			case BPF_S_ANC_IFINDEX:
+				if (is_imm8(offsetof(struct sk_buff, dev))) {
+					/* movq off8(%rdi),%rax */
+					EMIT4(0x48, 0x8b, 0x47, offsetof(struct sk_buff, dev));
+				} else {
+					EMIT3(0x48, 0x8b, 0x87); /* movq off32(%rdi),%rax */
+					EMIT(offsetof(struct sk_buff, dev), 4);
+				}
+				EMIT3(0x48, 0x85, 0xc0);	/* test %rax,%rax */
+				EMIT_COND_JMP(X86_JE, cleanup_addr - (addrs[i] - 6));
+				BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
+				EMIT2(0x8b, 0x80);	/* mov off32(%rax),%eax */
+				EMIT(offsetof(struct net_device, ifindex), 4);
+				break;
+			case BPF_S_ANC_MARK:
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
+				if (is_imm8(offsetof(struct sk_buff, mark))) {
+					/* mov off8(%rdi),%eax */
+					EMIT3(0x8b, 0x47, offsetof(struct sk_buff, mark));
+				} else {
+					EMIT2(0x8b, 0x87);
+					EMIT(offsetof(struct sk_buff, mark), 4);
+				}
+				break;
+			case BPF_S_ANC_RXHASH:
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
+				if (is_imm8(offsetof(struct sk_buff, rxhash))) {
+					/* mov off8(%rdi),%eax */
+					EMIT3(0x8b, 0x47, offsetof(struct sk_buff, rxhash));
+				} else {
+					EMIT2(0x8b, 0x87);
+					EMIT(offsetof(struct sk_buff, rxhash), 4);
+				}
+				break;
+			case BPF_S_ANC_QUEUE:
+				BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, queue_mapping) != 2);
+				if (is_imm8(offsetof(struct sk_buff, queue_mapping))) {
+					/* movzwl off8(%rdi),%eax */
+					EMIT4(0x0f, 0xb7, 0x47, offsetof(struct sk_buff, queue_mapping));
+				} else {
+					EMIT3(0x0f, 0xb7, 0x87); /* movzwl off32(%rdi),%eax */
+					EMIT(offsetof(struct sk_buff, queue_mapping), 4);
+				}
+				break;
+			case BPF_S_ANC_CPU:
+#ifdef CONFIG_SMP
+				EMIT4(0x65, 0x8b, 0x04, 0x25); /* mov %gs:off32,%eax */
+				EMIT((u32)(unsigned long)&cpu_number, 4); /* A = smp_processor_id(); */
+#else
+				CLEAR_A();
+#endif
+				break;
+			case BPF_S_LD_W_ABS:
+				func = sk_load_word;
+common_load:			seen |= SEEN_DATAREF;
+				if ((int)K < 0)
+					goto out;
+				t_offset = func - (image + addrs[i]);
+				EMIT1_off32(0xbe, K); /* mov imm32,%esi */
+				EMIT1_off32(0xe8, t_offset); /* call */
+				break;
+			case BPF_S_LD_H_ABS:
+				func = sk_load_half;
+				goto common_load;
+			case BPF_S_LD_B_ABS:
+				func = sk_load_byte;
+				goto common_load;
+			case BPF_S_LDX_B_MSH:
+				if ((int)K < 0) {
+					if (pc_ret0 != -1) {
+						EMIT_JMP(addrs[pc_ret0] - addrs[i]);
+						break;
+					}
+					CLEAR_A();
+					EMIT_JMP(cleanup_addr - addrs[i]);
+					break;
+				}
+				seen |= SEEN_DATAREF | SEEN_XREG;
+				t_offset = sk_load_byte_msh - (image + addrs[i]);
+				EMIT1_off32(0xbe, K);	/* mov imm32,%esi */
+				EMIT1_off32(0xe8, t_offset); /* call sk_load_byte_msh */
+				break;
+			case BPF_S_LD_W_IND:
+				func = sk_load_word_ind;
+common_load_ind:		seen |= SEEN_DATAREF | SEEN_XREG;
+				t_offset = func - (image + addrs[i]);
+				EMIT1_off32(0xbe, K);	/* mov imm32,%esi   */
+				EMIT1_off32(0xe8, t_offset);	/* call sk_load_xxx_ind */
+				break;
+			case BPF_S_LD_H_IND:
+				func = sk_load_half_ind;
+				goto common_load_ind;
+			case BPF_S_LD_B_IND:
+				func = sk_load_byte_ind;
+				goto common_load_ind;
+			case BPF_S_JMP_JA:
+				t_offset = addrs[i + K] - addrs[i];
+				EMIT_JMP(t_offset);
+				break;
+			COND_SEL(BPF_S_JMP_JGT_K, X86_JA, X86_JBE);
+			COND_SEL(BPF_S_JMP_JGE_K, X86_JAE, X86_JB);
+			COND_SEL(BPF_S_JMP_JEQ_K, X86_JE, X86_JNE);
+			COND_SEL(BPF_S_JMP_JSET_K,X86_JNE, X86_JE);
+			COND_SEL(BPF_S_JMP_JGT_X, X86_JA, X86_JBE);
+			COND_SEL(BPF_S_JMP_JGE_X, X86_JAE, X86_JB);
+			COND_SEL(BPF_S_JMP_JEQ_X, X86_JE, X86_JNE);
+			COND_SEL(BPF_S_JMP_JSET_X,X86_JNE, X86_JE);
+
+cond_branch:			f_offset = addrs[i + filter[i].jf] - addrs[i];
+				t_offset = addrs[i + filter[i].jt] - addrs[i];
+
+				/* same targets, can avoid doing the test :) */
+				if (filter[i].jt == filter[i].jf) {
+					EMIT_JMP(t_offset);
+					break;
+				}
+
+				switch (filter[i].code) {
+				case BPF_S_JMP_JGT_X:
+				case BPF_S_JMP_JGE_X:
+				case BPF_S_JMP_JEQ_X:
+					seen |= SEEN_XREG;
+					EMIT2(0x39, 0xd8); /* cmp %ebx,%eax */
+					break;
+				case BPF_S_JMP_JSET_X:
+					seen |= SEEN_XREG;
+					EMIT2(0x85, 0xd8); /* test %ebx,%eax */
+					break;
+				case BPF_S_JMP_JEQ_K:
+					if (K == 0) {
+						EMIT2(0x85, 0xc0); /* test   %eax,%eax */
+						break;
+					}
+				case BPF_S_JMP_JGT_K:
+				case BPF_S_JMP_JGE_K:
+					if (K <= 127)
+						EMIT3(0x83, 0xf8, K); /* cmp imm8,%eax */
+					else
+						EMIT1_off32(0x3d, K); /* cmp imm32,%eax */
+					break;
+				case BPF_S_JMP_JSET_K:
+					if (K <= 0xFF)
+						EMIT2(0xa8, K); /* test imm8,%al */
+					else if (!(K & 0xFFFF00FF))
+						EMIT3(0xf6, 0xc4, K >> 8); /* test imm8,%ah */
+					else if (K <= 0xFFFF) {
+						EMIT2(0x66, 0xa9); /* test imm16,%ax */
+						EMIT(K, 2);
+					} else {
+						EMIT1_off32(0xa9, K); /* test imm32,%eax */
+					}
+					break;
+				}
+				if (filter[i].jt != 0) {
+					if (filter[i].jf)
+						t_offset += is_near(f_offset) ? 2 : 6;
+					EMIT_COND_JMP(t_op, t_offset);
+					if (filter[i].jf)
+						EMIT_JMP(f_offset);
+					break;
+				}
+				EMIT_COND_JMP(f_op, f_offset);
+				break;
+			default:
+				/* hmm, too complex filter, give up with jit compiler */
+				goto out;
+			}
+			ilen = prog - temp;
+			if (image) {
+				if (unlikely(proglen + ilen > oldproglen)) {
+					pr_err("bpb_jit_compile fatal error\n");
+					kfree(addrs);
+					module_free(NULL, image);
+					return;
+				}
+				memcpy(image + proglen, temp, ilen);
+			}
+			proglen += ilen;
+			addrs[i] = proglen;
+			prog = temp;
+		}
+		/* last bpf instruction is always a RET :
+		 * use it to give the cleanup instruction(s) addr
+		 */
+		cleanup_addr = proglen - 1; /* ret */
+		if (seen)
+			cleanup_addr -= 1; /* leaveq */
+		if (seen & SEEN_XREG)
+			cleanup_addr -= 4; /* mov  -8(%rbp),%rbx */
+
+		if (image) {
+			WARN_ON(proglen != oldproglen);
+			break;
+		}
+		if (proglen == oldproglen) {
+			image = module_alloc(max_t(unsigned int,
+						   proglen,
+						   sizeof(struct work_struct)));
+			if (!image)
+				goto out;
+		}
+		oldproglen = proglen;
+	}
+	if (bpf_jit_enable > 1)
+		pr_err("flen=%d proglen=%u pass=%d image=%p\n",
+		       flen, proglen, pass, image);
+
+	if (image) {
+		if (bpf_jit_enable > 1)
+			print_hex_dump(KERN_ERR, "JIT code: ", DUMP_PREFIX_ADDRESS,
+				       16, 1, image, proglen, false);
+
+		bpf_flush_icache(image, image + proglen);
+
+		fp->bpf_func = (void *)image;
+	}
+out:
+	kfree(addrs);
+	return;
+}
+
+static void jit_free_defer(struct work_struct *arg)
+{
+	module_free(NULL, arg);
+}
+
+/* run from softirq, we must use a work_struct to call
+ * module_free() from process context
+ */
+void bpf_jit_free(struct sk_filter *fp)
+{
+	if (fp->bpf_func != sk_run_filter) {
+		struct work_struct *work = (struct work_struct *)fp->bpf_func;
+
+		INIT_WORK(work, jit_free_defer);
+		schedule_work(work);
+	}
+}
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index 2d49d4e19a3..a5b64ab4cd6 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -16,17 +16,6 @@
 #include <asm/stacktrace.h>
 #include <linux/compat.h>
 
-static void backtrace_warning_symbol(void *data, char *msg,
-				     unsigned long symbol)
-{
-	/* Ignore warnings */
-}
-
-static void backtrace_warning(void *data, char *msg)
-{
-	/* Ignore warnings */
-}
-
 static int backtrace_stack(void *data, char *name)
 {
 	/* Yes, we want all stacks */
@@ -42,8 +31,6 @@ static void backtrace_address(void *data, unsigned long addr, int reliable)
 }
 
 static struct stacktrace_ops backtrace_ops = {
-	.warning	= backtrace_warning,
-	.warning_symbol	= backtrace_warning_symbol,
 	.stack		= backtrace_stack,
 	.address	= backtrace_address,
 	.walk_stack	= print_context_stack,
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 8dace181c88..cf9750004a0 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -49,6 +49,10 @@ u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 	val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
 	val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
 	val |= (counter_config->unit_mask & 0xFF) << 8;
+	counter_config->extra &= (ARCH_PERFMON_EVENTSEL_INV |
+				  ARCH_PERFMON_EVENTSEL_EDGE |
+				  ARCH_PERFMON_EVENTSEL_CMASK);
+	val |= counter_config->extra;
 	event &= model->event_mask ? model->event_mask : 0xFF;
 	val |= event & 0xFF;
 	val |= (event & 0x0F00) << 24;
@@ -440,6 +444,7 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 		oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
 		oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
 		oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+		oprofilefs_create_ulong(sb, dir, "extra", &counter_config[i].extra);
 	}
 
 	return 0;
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index e28398df0df..0b7b7b179cb 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -22,6 +22,7 @@ struct op_counter_config {
 	unsigned long kernel;
 	unsigned long user;
 	unsigned long unit_mask;
+	unsigned long extra;
 };
 
 extern struct op_counter_config counter_config[];
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index e37b407a0ee..8214724ce54 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -108,7 +108,8 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		}
 		irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq, 0,
 					       (type == PCI_CAP_ID_MSIX) ?
-					       "msi-x" : "msi");
+					       "msi-x" : "msi",
+					       DOMID_SELF);
 		if (irq < 0)
 			goto error;
 		dev_dbg(&dev->dev,
@@ -148,7 +149,8 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0,
 					       (type == PCI_CAP_ID_MSIX) ?
 					       "pcifront-msi-x" :
-					       "pcifront-msi");
+					       "pcifront-msi",
+						DOMID_SELF);
 		if (irq < 0)
 			goto free;
 		i++;
@@ -190,9 +192,16 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	list_for_each_entry(msidesc, &dev->msi_list, list) {
 		struct physdev_map_pirq map_irq;
+		domid_t domid;
+
+		domid = ret = xen_find_device_domain_owner(dev);
+		/* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED,
+		 * hence check ret value for < 0. */
+		if (ret < 0)
+			domid = DOMID_SELF;
 
 		memset(&map_irq, 0, sizeof(map_irq));
-		map_irq.domid = DOMID_SELF;
+		map_irq.domid = domid;
 		map_irq.type = MAP_PIRQ_TYPE_MSI;
 		map_irq.index = -1;
 		map_irq.pirq = -1;
@@ -215,14 +224,16 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 		ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
 		if (ret) {
-			dev_warn(&dev->dev, "xen map irq failed %d\n", ret);
+			dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
+				 ret, domid);
 			goto out;
 		}
 
 		ret = xen_bind_pirq_msi_to_irq(dev, msidesc,
 					       map_irq.pirq, map_irq.index,
 					       (type == PCI_CAP_ID_MSIX) ?
-					       "msi-x" : "msi");
+					       "msi-x" : "msi",
+						domid);
 		if (ret < 0)
 			goto out;
 	}
@@ -461,3 +472,78 @@ void __init xen_setup_pirqs(void)
 	}
 }
 #endif
+
+#ifdef CONFIG_XEN_DOM0
+struct xen_device_domain_owner {
+	domid_t domain;
+	struct pci_dev *dev;
+	struct list_head list;
+};
+
+static DEFINE_SPINLOCK(dev_domain_list_spinlock);
+static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
+
+static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
+{
+	struct xen_device_domain_owner *owner;
+
+	list_for_each_entry(owner, &dev_domain_list, list) {
+		if (owner->dev == dev)
+			return owner;
+	}
+	return NULL;
+}
+
+int xen_find_device_domain_owner(struct pci_dev *dev)
+{
+	struct xen_device_domain_owner *owner;
+	int domain = -ENODEV;
+
+	spin_lock(&dev_domain_list_spinlock);
+	owner = find_device(dev);
+	if (owner)
+		domain = owner->domain;
+	spin_unlock(&dev_domain_list_spinlock);
+	return domain;
+}
+EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
+
+int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
+{
+	struct xen_device_domain_owner *owner;
+
+	owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
+	if (!owner)
+		return -ENODEV;
+
+	spin_lock(&dev_domain_list_spinlock);
+	if (find_device(dev)) {
+		spin_unlock(&dev_domain_list_spinlock);
+		kfree(owner);
+		return -EEXIST;
+	}
+	owner->domain = domain;
+	owner->dev = dev;
+	list_add_tail(&owner->list, &dev_domain_list);
+	spin_unlock(&dev_domain_list_spinlock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
+
+int xen_unregister_device_domain_owner(struct pci_dev *dev)
+{
+	struct xen_device_domain_owner *owner;
+
+	spin_lock(&dev_domain_list_spinlock);
+	owner = find_device(dev);
+	if (!owner) {
+		spin_unlock(&dev_domain_list_spinlock);
+		return -ENODEV;
+	}
+	list_del(&owner->list);
+	spin_unlock(&dev_domain_list_spinlock);
+	kfree(owner);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
+#endif
diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
index dc701ea5854..e70be38ce03 100644
--- a/arch/x86/platform/ce4100/falconfalls.dts
+++ b/arch/x86/platform/ce4100/falconfalls.dts
@@ -74,6 +74,7 @@
 				compatible = "intel,ce4100-pci", "pci";
 				device_type = "pci";
 				bus-range = <1 1>;
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
 				ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>;
 
 				interrupt-parent = <&ioapic2>;
@@ -346,7 +347,7 @@
 						   "pciclass0c03";
 
 					reg = <0x16800 0x0 0x0 0x0 0x0>;
-					interrupts = <22 3>;
+					interrupts = <22 1>;
 				};
 
 				usb@d,1 {
@@ -356,7 +357,7 @@
 						   "pciclass0c03";
 
 					reg = <0x16900 0x0 0x0 0x0 0x0>;
-					interrupts = <22 3>;
+					interrupts = <22 1>;
 				};
 
 				sata@e,0 {
@@ -366,7 +367,7 @@
 						   "pciclass0106";
 
 					reg = <0x17000 0x0 0x0 0x0 0x0>;
-					interrupts = <23 3>;
+					interrupts = <23 1>;
 				};
 
 				flash@f,0 {
@@ -412,6 +413,7 @@
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "isa";
+				reg = <0xf800 0x0 0x0 0x0 0x0>;
 				ranges = <1 0 0 0 0 0x100>;
 
 				rtc@70 {
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 0fe27d7c625..b30aa26a8df 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -145,17 +145,6 @@ static void virt_efi_reset_system(int reset_type,
 		       data_size, data);
 }
 
-static efi_status_t virt_efi_set_virtual_address_map(
-	unsigned long memory_map_size,
-	unsigned long descriptor_size,
-	u32 descriptor_version,
-	efi_memory_desc_t *virtual_map)
-{
-	return efi_call_virt4(set_virtual_address_map,
-			      memory_map_size, descriptor_size,
-			      descriptor_version, virtual_map);
-}
-
 static efi_status_t __init phys_efi_set_virtual_address_map(
 	unsigned long memory_map_size,
 	unsigned long descriptor_size,
@@ -468,11 +457,25 @@ void __init efi_init(void)
 #endif
 }
 
+void __init efi_set_executable(efi_memory_desc_t *md, bool executable)
+{
+	u64 addr, npages;
+
+	addr = md->virt_addr;
+	npages = md->num_pages;
+
+	memrange_efi_to_native(&addr, &npages);
+
+	if (executable)
+		set_memory_x(addr, npages);
+	else
+		set_memory_nx(addr, npages);
+}
+
 static void __init runtime_code_page_mkexec(void)
 {
 	efi_memory_desc_t *md;
 	void *p;
-	u64 addr, npages;
 
 	/* Make EFI runtime service code area executable */
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
@@ -481,10 +484,7 @@ static void __init runtime_code_page_mkexec(void)
 		if (md->type != EFI_RUNTIME_SERVICES_CODE)
 			continue;
 
-		addr = md->virt_addr;
-		npages = md->num_pages;
-		memrange_efi_to_native(&addr, &npages);
-		set_memory_x(addr, npages);
+		efi_set_executable(md, true);
 	}
 }
 
@@ -498,13 +498,42 @@ static void __init runtime_code_page_mkexec(void)
  */
 void __init efi_enter_virtual_mode(void)
 {
-	efi_memory_desc_t *md;
+	efi_memory_desc_t *md, *prev_md = NULL;
 	efi_status_t status;
 	unsigned long size;
 	u64 end, systab, addr, npages, end_pfn;
-	void *p, *va;
+	void *p, *va, *new_memmap = NULL;
+	int count = 0;
 
 	efi.systab = NULL;
+
+	/* Merge contiguous regions of the same type and attribute */
+	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+		u64 prev_size;
+		md = p;
+
+		if (!prev_md) {
+			prev_md = md;
+			continue;
+		}
+
+		if (prev_md->type != md->type ||
+		    prev_md->attribute != md->attribute) {
+			prev_md = md;
+			continue;
+		}
+
+		prev_size = prev_md->num_pages << EFI_PAGE_SHIFT;
+
+		if (md->phys_addr == (prev_md->phys_addr + prev_size)) {
+			prev_md->num_pages += md->num_pages;
+			md->type = EFI_RESERVED_TYPE;
+			md->attribute = 0;
+			continue;
+		}
+		prev_md = md;
+	}
+
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
 		md = p;
 		if (!(md->attribute & EFI_MEMORY_RUNTIME))
@@ -541,15 +570,21 @@ void __init efi_enter_virtual_mode(void)
 			systab += md->virt_addr - md->phys_addr;
 			efi.systab = (efi_system_table_t *) (unsigned long) systab;
 		}
+		new_memmap = krealloc(new_memmap,
+				      (count + 1) * memmap.desc_size,
+				      GFP_KERNEL);
+		memcpy(new_memmap + (count * memmap.desc_size), md,
+		       memmap.desc_size);
+		count++;
 	}
 
 	BUG_ON(!efi.systab);
 
 	status = phys_efi_set_virtual_address_map(
-		memmap.desc_size * memmap.nr_map,
+		memmap.desc_size * count,
 		memmap.desc_size,
 		memmap.desc_version,
-		memmap.phys_map);
+		(efi_memory_desc_t *)__pa(new_memmap));
 
 	if (status != EFI_SUCCESS) {
 		printk(KERN_ALERT "Unable to switch EFI into virtual mode "
@@ -572,11 +607,12 @@ void __init efi_enter_virtual_mode(void)
 	efi.set_variable = virt_efi_set_variable;
 	efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count;
 	efi.reset_system = virt_efi_reset_system;
-	efi.set_virtual_address_map = virt_efi_set_virtual_address_map;
+	efi.set_virtual_address_map = NULL;
 	if (__supported_pte_mask & _PAGE_NX)
 		runtime_code_page_mkexec();
 	early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
 	memmap.map = NULL;
+	kfree(new_memmap);
 }
 
 /*
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index ac0621a7ac3..2649426a790 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -41,22 +41,7 @@
 static pgd_t save_pgd __initdata;
 static unsigned long efi_flags __initdata;
 
-static void __init early_mapping_set_exec(unsigned long start,
-					  unsigned long end,
-					  int executable)
-{
-	unsigned long num_pages;
-
-	start &= PMD_MASK;
-	end = (end + PMD_SIZE - 1) & PMD_MASK;
-	num_pages = (end - start) >> PAGE_SHIFT;
-	if (executable)
-		set_memory_x((unsigned long)__va(start), num_pages);
-	else
-		set_memory_nx((unsigned long)__va(start), num_pages);
-}
-
-static void __init early_runtime_code_mapping_set_exec(int executable)
+static void __init early_code_mapping_set_exec(int executable)
 {
 	efi_memory_desc_t *md;
 	void *p;
@@ -67,11 +52,8 @@ static void __init early_runtime_code_mapping_set_exec(int executable)
 	/* Make EFI runtime service code area executable */
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
 		md = p;
-		if (md->type == EFI_RUNTIME_SERVICES_CODE) {
-			unsigned long end;
-			end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
-			early_mapping_set_exec(md->phys_addr, end, executable);
-		}
+		if (md->type == EFI_RUNTIME_SERVICES_CODE)
+			efi_set_executable(md, executable);
 	}
 }
 
@@ -79,7 +61,7 @@ void __init efi_call_phys_prelog(void)
 {
 	unsigned long vaddress;
 
-	early_runtime_code_mapping_set_exec(1);
+	early_code_mapping_set_exec(1);
 	local_irq_save(efi_flags);
 	vaddress = (unsigned long)__va(0x0UL);
 	save_pgd = *pgd_offset_k(0x0UL);
@@ -95,7 +77,7 @@ void __init efi_call_phys_epilog(void)
 	set_pgd(pgd_offset_k(0x0UL), save_pgd);
 	__flush_tlb_all();
 	local_irq_restore(efi_flags);
-	early_runtime_code_mapping_set_exec(0);
+	early_code_mapping_set_exec(0);
 }
 
 void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
@@ -107,8 +89,10 @@ void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
 		return ioremap(phys_addr, size);
 
 	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
-	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
-		return NULL;
+	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
+		unsigned long top = last_map_pfn << PAGE_SHIFT;
+		efi_ioremap(top, size - (top - phys_addr), type);
+	}
 
 	return (void __iomem *)__va(phys_addr);
 }
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 5c0207bf959..7000e74b308 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -97,11 +97,11 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table)
 			pentry->freq_hz, pentry->irq);
 			if (!pentry->irq)
 				continue;
-			mp_irq.type = MP_IOAPIC;
+			mp_irq.type = MP_INTSRC;
 			mp_irq.irqtype = mp_INT;
 /* triggering mode edge bit 2-3, active high polarity bit 0-1 */
 			mp_irq.irqflag = 5;
-			mp_irq.srcbus = 0;
+			mp_irq.srcbus = MP_BUS_ISA;
 			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
 			mp_irq.dstapic = MP_APIC_ALL;
 			mp_irq.dstirq = pentry->irq;
@@ -168,10 +168,10 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
 		pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
 			totallen, (u32)pentry->phys_addr, pentry->irq);
-		mp_irq.type = MP_IOAPIC;
+		mp_irq.type = MP_INTSRC;
 		mp_irq.irqtype = mp_INT;
 		mp_irq.irqflag = 0xf;	/* level trigger and active low */
-		mp_irq.srcbus = 0;
+		mp_irq.srcbus = MP_BUS_ISA;
 		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
 		mp_irq.dstapic = MP_APIC_ALL;
 		mp_irq.dstirq = pentry->irq;
@@ -194,7 +194,7 @@ static unsigned long __init mrst_calibrate_tsc(void)
 	return 0;
 }
 
-void __init mrst_time_init(void)
+static void __init mrst_time_init(void)
 {
 	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
 	switch (mrst_timer_options) {
@@ -216,7 +216,7 @@ void __init mrst_time_init(void)
 	apbt_time_init();
 }
 
-void __cpuinit mrst_arch_setup(void)
+static void __cpuinit mrst_arch_setup(void)
 {
 	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
 		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
@@ -282,7 +282,7 @@ void __init x86_mrst_early_setup(void)
 	/* Avoid searching for BIOS MP tables */
 	x86_init.mpparse.find_smp_config = x86_init_noop;
 	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
-
+	set_bit(MP_BUS_ISA, mp_bus_not_pci);
 }
 
 /*
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index 04cf645feb9..73d70d65e76 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -100,9 +100,11 @@ int vrtc_set_mmss(unsigned long nowtime)
 
 void __init mrst_rtc_init(void)
 {
-	unsigned long vrtc_paddr = sfi_mrtc_array[0].phys_addr;
+	unsigned long vrtc_paddr;
 
 	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
+
+	vrtc_paddr = sfi_mrtc_array[0].phys_addr;
 	if (!sfi_mrtc_num || !vrtc_paddr)
 		return;
 
diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile
index c2a8cab65e5..81c5e2165c2 100644
--- a/arch/x86/platform/olpc/Makefile
+++ b/arch/x86/platform/olpc/Makefile
@@ -1,4 +1,2 @@
-obj-$(CONFIG_OLPC)		+= olpc.o
+obj-$(CONFIG_OLPC)		+= olpc.o olpc_ofw.o olpc_dt.o
 obj-$(CONFIG_OLPC_XO1)		+= olpc-xo1.o
-obj-$(CONFIG_OLPC)		+= olpc_ofw.o
-obj-$(CONFIG_OF_PROMTREE)	+= olpc_dt.o
diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c
index edaf3fe8dc5..0060fd59ea0 100644
--- a/arch/x86/platform/olpc/olpc.c
+++ b/arch/x86/platform/olpc/olpc.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <asm/geode.h>
 #include <asm/setup.h>
@@ -187,41 +188,43 @@ err:
 }
 EXPORT_SYMBOL_GPL(olpc_ec_cmd);
 
-static bool __init check_ofw_architecture(void)
+static bool __init check_ofw_architecture(struct device_node *root)
 {
-	size_t propsize;
-	char olpc_arch[5];
-	const void *args[] = { NULL, "architecture", olpc_arch, (void *)5 };
-	void *res[] = { &propsize };
+	const char *olpc_arch;
+	int propsize;
 
-	if (olpc_ofw("getprop", args, res)) {
-		printk(KERN_ERR "ofw: getprop call failed!\n");
-		return false;
-	}
+	olpc_arch = of_get_property(root, "architecture", &propsize);
 	return propsize == 5 && strncmp("OLPC", olpc_arch, 5) == 0;
 }
 
-static u32 __init get_board_revision(void)
+static u32 __init get_board_revision(struct device_node *root)
 {
-	size_t propsize;
-	__be32 rev;
-	const void *args[] = { NULL, "board-revision-int", &rev, (void *)4 };
-	void *res[] = { &propsize };
-
-	if (olpc_ofw("getprop", args, res) || propsize != 4) {
-		printk(KERN_ERR "ofw: getprop call failed!\n");
-		return cpu_to_be32(0);
-	}
-	return be32_to_cpu(rev);
+	int propsize;
+	const __be32 *rev;
+
+	rev = of_get_property(root, "board-revision-int", &propsize);
+	if (propsize != 4)
+		return 0;
+
+	return be32_to_cpu(*rev);
 }
 
 static bool __init platform_detect(void)
 {
-	if (!check_ofw_architecture())
+	struct device_node *root = of_find_node_by_path("/");
+	bool success;
+
+	if (!root)
 		return false;
-	olpc_platform_info.flags |= OLPC_F_PRESENT;
-	olpc_platform_info.boardrev = get_board_revision();
-	return true;
+
+	success = check_ofw_architecture(root);
+	if (success) {
+		olpc_platform_info.boardrev = get_board_revision(root);
+		olpc_platform_info.flags |= OLPC_F_PRESENT;
+	}
+
+	of_node_put(root);
+	return success;
 }
 
 static int __init add_xo1_platform_devices(void)
diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c
index 044bda5b317..d39f63d017d 100644
--- a/arch/x86/platform/olpc/olpc_dt.c
+++ b/arch/x86/platform/olpc/olpc_dt.c
@@ -19,7 +19,9 @@
 #include <linux/kernel.h>
 #include <linux/bootmem.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/of_pdt.h>
+#include <asm/olpc.h>
 #include <asm/olpc_ofw.h>
 
 static phandle __init olpc_dt_getsibling(phandle node)
@@ -180,3 +182,20 @@ void __init olpc_dt_build_devicetree(void)
 	pr_info("PROM DT: Built device tree with %u bytes of memory.\n",
 			prom_early_allocated);
 }
+
+/* A list of DT node/bus matches that we want to expose as platform devices */
+static struct of_device_id __initdata of_ids[] = {
+	{ .compatible = "olpc,xo1-battery" },
+	{ .compatible = "olpc,xo1-dcon" },
+	{ .compatible = "olpc,xo1-rtc" },
+	{},
+};
+
+static int __init olpc_create_platform_devices(void)
+{
+	if (machine_is_olpc())
+		return of_platform_bus_probe(NULL, of_ids, NULL);
+	else
+		return 0;
+}
+device_initcall(olpc_create_platform_devices);
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index a7b38d35c29..c58e0ea39ef 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -11,6 +11,7 @@
 #include <linux/debugfs.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 
 #include <asm/mmu_context.h>
 #include <asm/uv/uv.h>
@@ -698,16 +699,17 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 					  struct mm_struct *mm,
 					  unsigned long va, unsigned int cpu)
 {
-	int tcpu;
-	int uvhub;
 	int locals = 0;
 	int remotes = 0;
 	int hubs = 0;
+	int tcpu;
+	int tpnode;
 	struct bau_desc *bau_desc;
 	struct cpumask *flush_mask;
 	struct ptc_stats *stat;
 	struct bau_control *bcp;
 	struct bau_control *tbcp;
+	struct hub_and_pnode *hpp;
 
 	/* kernel was booted 'nobau' */
 	if (nobau)
@@ -749,11 +751,18 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 	bau_desc += UV_ITEMS_PER_DESCRIPTOR * bcp->uvhub_cpu;
 	bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
 
-	/* cpu statistics */
 	for_each_cpu(tcpu, flush_mask) {
-		uvhub = uv_cpu_to_blade_id(tcpu);
-		bau_uvhub_set(uvhub, &bau_desc->distribution);
-		if (uvhub == bcp->uvhub)
+		/*
+		 * The distribution vector is a bit map of pnodes, relative
+		 * to the partition base pnode (and the partition base nasid
+		 * in the header).
+		 * Translate cpu to pnode and hub using an array stored
+		 * in local memory.
+		 */
+		hpp = &bcp->socket_master->target_hub_and_pnode[tcpu];
+		tpnode = hpp->pnode - bcp->partition_base_pnode;
+		bau_uvhub_set(tpnode, &bau_desc->distribution);
+		if (hpp->uvhub == bcp->uvhub)
 			locals++;
 		else
 			remotes++;
@@ -854,7 +863,7 @@ void uv_bau_message_interrupt(struct pt_regs *regs)
  * an interrupt, but causes an error message to be returned to
  * the sender.
  */
-static void uv_enable_timeouts(void)
+static void __init uv_enable_timeouts(void)
 {
 	int uvhub;
 	int nuvhubs;
@@ -1325,10 +1334,10 @@ static int __init uv_ptc_init(void)
 }
 
 /*
- * initialize the sending side's sending buffers
+ * Initialize the sending side's sending buffers.
  */
 static void
-uv_activation_descriptor_init(int node, int pnode)
+uv_activation_descriptor_init(int node, int pnode, int base_pnode)
 {
 	int i;
 	int cpu;
@@ -1351,11 +1360,11 @@ uv_activation_descriptor_init(int node, int pnode)
 	n = pa >> uv_nshift;
 	m = pa & uv_mmask;
 
+	/* the 14-bit pnode */
 	uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
 			      (n << UV_DESC_BASE_PNODE_SHIFT | m));
-
 	/*
-	 * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
+	 * Initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
 	 * cpu even though we only use the first one; one descriptor can
 	 * describe a broadcast to 256 uv hubs.
 	 */
@@ -1364,12 +1373,13 @@ uv_activation_descriptor_init(int node, int pnode)
 		memset(bd2, 0, sizeof(struct bau_desc));
 		bd2->header.sw_ack_flag = 1;
 		/*
-		 * base_dest_nodeid is the nasid of the first uvhub
-		 * in the partition. The bit map will indicate uvhub numbers,
-		 * which are 0-N in a partition. Pnodes are unique system-wide.
+		 * The base_dest_nasid set in the message header is the nasid
+		 * of the first uvhub in the partition. The bit map will
+		 * indicate destination pnode numbers relative to that base.
+		 * They may not be consecutive if nasid striding is being used.
 		 */
-		bd2->header.base_dest_nodeid = UV_PNODE_TO_NASID(uv_partition_base_pnode);
-		bd2->header.dest_subnodeid = 0x10; /* the LB */
+		bd2->header.base_dest_nasid = UV_PNODE_TO_NASID(base_pnode);
+		bd2->header.dest_subnodeid = UV_LB_SUBNODEID;
 		bd2->header.command = UV_NET_ENDPOINT_INTD;
 		bd2->header.int_both = 1;
 		/*
@@ -1441,7 +1451,7 @@ uv_payload_queue_init(int node, int pnode)
 /*
  * Initialization of each UV hub's structures
  */
-static void __init uv_init_uvhub(int uvhub, int vector)
+static void __init uv_init_uvhub(int uvhub, int vector, int base_pnode)
 {
 	int node;
 	int pnode;
@@ -1449,11 +1459,11 @@ static void __init uv_init_uvhub(int uvhub, int vector)
 
 	node = uvhub_to_first_node(uvhub);
 	pnode = uv_blade_to_pnode(uvhub);
-	uv_activation_descriptor_init(node, pnode);
+	uv_activation_descriptor_init(node, pnode, base_pnode);
 	uv_payload_queue_init(node, pnode);
 	/*
-	 * the below initialization can't be in firmware because the
-	 * messaging IRQ will be determined by the OS
+	 * The below initialization can't be in firmware because the
+	 * messaging IRQ will be determined by the OS.
 	 */
 	apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
 	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
@@ -1490,10 +1500,11 @@ calculate_destination_timeout(void)
 /*
  * initialize the bau_control structure for each cpu
  */
-static int __init uv_init_per_cpu(int nuvhubs)
+static int __init uv_init_per_cpu(int nuvhubs, int base_part_pnode)
 {
 	int i;
 	int cpu;
+	int tcpu;
 	int pnode;
 	int uvhub;
 	int have_hmaster;
@@ -1527,6 +1538,15 @@ static int __init uv_init_per_cpu(int nuvhubs)
 		bcp = &per_cpu(bau_control, cpu);
 		memset(bcp, 0, sizeof(struct bau_control));
 		pnode = uv_cpu_hub_info(cpu)->pnode;
+		if ((pnode - base_part_pnode) >= UV_DISTRIBUTION_SIZE) {
+			printk(KERN_EMERG
+				"cpu %d pnode %d-%d beyond %d; BAU disabled\n",
+				cpu, pnode, base_part_pnode,
+				UV_DISTRIBUTION_SIZE);
+			return 1;
+		}
+		bcp->osnode = cpu_to_node(cpu);
+		bcp->partition_base_pnode = uv_partition_base_pnode;
 		uvhub = uv_cpu_hub_info(cpu)->numa_blade_id;
 		*(uvhub_mask + (uvhub/8)) |= (1 << (uvhub%8));
 		bdp = &uvhub_descs[uvhub];
@@ -1535,7 +1555,7 @@ static int __init uv_init_per_cpu(int nuvhubs)
 		bdp->pnode = pnode;
 		/* kludge: 'assuming' one node per socket, and assuming that
 		   disabling a socket just leaves a gap in node numbers */
-		socket = (cpu_to_node(cpu) & 1);
+		socket = bcp->osnode & 1;
 		bdp->socket_mask |= (1 << socket);
 		sdp = &bdp->socket[socket];
 		sdp->cpu_number[sdp->num_cpus] = cpu;
@@ -1584,6 +1604,20 @@ static int __init uv_init_per_cpu(int nuvhubs)
 nextsocket:
 			socket++;
 			socket_mask = (socket_mask >> 1);
+			/* each socket gets a local array of pnodes/hubs */
+			bcp = smaster;
+			bcp->target_hub_and_pnode = kmalloc_node(
+				sizeof(struct hub_and_pnode) *
+				num_possible_cpus(), GFP_KERNEL, bcp->osnode);
+			memset(bcp->target_hub_and_pnode, 0,
+				sizeof(struct hub_and_pnode) *
+				num_possible_cpus());
+			for_each_present_cpu(tcpu) {
+				bcp->target_hub_and_pnode[tcpu].pnode =
+					uv_cpu_hub_info(tcpu)->pnode;
+				bcp->target_hub_and_pnode[tcpu].uvhub =
+					uv_cpu_hub_info(tcpu)->numa_blade_id;
+			}
 		}
 	}
 	kfree(uvhub_descs);
@@ -1636,21 +1670,22 @@ static int __init uv_bau_init(void)
 	spin_lock_init(&disable_lock);
 	congested_cycles = microsec_2_cycles(congested_response_us);
 
-	if (uv_init_per_cpu(nuvhubs)) {
-		nobau = 1;
-		return 0;
-	}
-
 	uv_partition_base_pnode = 0x7fffffff;
-	for (uvhub = 0; uvhub < nuvhubs; uvhub++)
+	for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
 		if (uv_blade_nr_possible_cpus(uvhub) &&
 			(uv_blade_to_pnode(uvhub) < uv_partition_base_pnode))
 			uv_partition_base_pnode = uv_blade_to_pnode(uvhub);
+	}
+
+	if (uv_init_per_cpu(nuvhubs, uv_partition_base_pnode)) {
+		nobau = 1;
+		return 0;
+	}
 
 	vector = UV_BAU_MESSAGE;
 	for_each_possible_blade(uvhub)
 		if (uv_blade_nr_possible_cpus(uvhub))
-			uv_init_uvhub(uvhub, vector);
+			uv_init_uvhub(uvhub, vector, uv_partition_base_pnode);
 
 	uv_enable_timeouts();
 	alloc_intr_gate(vector, uv_bau_message_intr1);
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 9daf5d1af9f..0eb90184515 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -40,7 +40,6 @@ static struct clocksource clocksource_uv = {
 	.rating		= 400,
 	.read		= uv_read_rtc,
 	.mask		= (cycle_t)UVH_RTC_REAL_TIME_CLOCK_MASK,
-	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -372,14 +371,11 @@ static __init int uv_rtc_setup_clock(void)
 	if (!is_uv_system())
 		return -ENODEV;
 
-	clocksource_uv.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
-				clocksource_uv.shift);
-
 	/* If single blade, prefer tsc */
 	if (uv_num_possible_blades() == 1)
 		clocksource_uv.rating = 250;
 
-	rc = clocksource_register(&clocksource_uv);
+	rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
 	if (rc)
 		printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
 	else
diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c
index fe4cf829487..c7abf13a213 100644
--- a/arch/x86/platform/visws/visws_quirks.c
+++ b/arch/x86/platform/visws/visws_quirks.c
@@ -471,15 +471,7 @@ static unsigned int startup_piix4_master_irq(struct irq_data *data)
 {
 	legacy_pic->init(0);
 	enable_cobalt_irq(data);
-}
-
-static void end_piix4_master_irq(struct irq_data *data)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	enable_cobalt_irq(data);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
+	return 0;
 }
 
 static struct irq_chip piix4_master_irq_type = {
@@ -492,7 +484,7 @@ static void pii4_mask(struct irq_data *data) { }
 
 static struct irq_chip piix4_virtual_irq_type = {
 	.name		= "PIIX4-virtual",
-	.mask		= pii4_mask,
+	.irq_mask	= pii4_mask,
 };
 
 /*
@@ -580,9 +572,9 @@ static struct irqaction cascade_action = {
 
 static inline void set_piix4_virtual_irq_type(void)
 {
-	piix4_virtual_irq_type.enable =	i8259A_chip.unmask;
-	piix4_virtual_irq_type.disable = i8259A_chip.mask;
-	piix4_virtual_irq_type.unmask =	i8259A_chip.unmask;
+	piix4_virtual_irq_type.irq_enable = i8259A_chip.irq_unmask;
+	piix4_virtual_irq_type.irq_disable = i8259A_chip.irq_mask;
+	piix4_virtual_irq_type.irq_unmask = i8259A_chip.irq_unmask;
 }
 
 static void __init visws_pre_intr_init(void)
@@ -599,7 +591,7 @@ static void __init visws_pre_intr_init(void)
 		else if (i == CO_IRQ_IDE0)
 			chip = &cobalt_irq_type;
 		else if (i == CO_IRQ_IDE1)
-			>chip = &cobalt_irq_type;
+			chip = &cobalt_irq_type;
 		else if (i == CO_IRQ_8259)
 			chip = &piix4_master_irq_type;
 		else if (i < CO_IRQ_APIC0)
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 1c7121ba18f..5cc821cb2e0 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -39,6 +39,7 @@ config XEN_MAX_DOMAIN_MEMORY
 config XEN_SAVE_RESTORE
        bool
        depends on XEN
+       select HIBERNATE_CALLBACKS
        default y
 
 config XEN_DEBUG_FS
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 49dbd78ec3c..dd7b88f2ec7 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -235,9 +235,10 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
 	*dx &= maskedx;
 }
 
-static __init void xen_init_cpuid_mask(void)
+static void __init xen_init_cpuid_mask(void)
 {
 	unsigned int ax, bx, cx, dx;
+	unsigned int xsave_mask;
 
 	cpuid_leaf1_edx_mask =
 		~((1 << X86_FEATURE_MCE)  |  /* disable MCE */
@@ -249,24 +250,16 @@ static __init void xen_init_cpuid_mask(void)
 		cpuid_leaf1_edx_mask &=
 			~((1 << X86_FEATURE_APIC) |  /* disable local APIC */
 			  (1 << X86_FEATURE_ACPI));  /* disable ACPI */
-
 	ax = 1;
-	cx = 0;
 	xen_cpuid(&ax, &bx, &cx, &dx);
 
-	/* cpuid claims we support xsave; try enabling it to see what happens */
-	if (cx & (1 << (X86_FEATURE_XSAVE % 32))) {
-		unsigned long cr4;
-
-		set_in_cr4(X86_CR4_OSXSAVE);
-		
-		cr4 = read_cr4();
+	xsave_mask =
+		(1 << (X86_FEATURE_XSAVE % 32)) |
+		(1 << (X86_FEATURE_OSXSAVE % 32));
 
-		if ((cr4 & X86_CR4_OSXSAVE) == 0)
-			cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32));
-
-		clear_in_cr4(X86_CR4_OSXSAVE);
-	}
+	/* Xen will set CR4.OSXSAVE if supported and not disabled by force */
+	if ((cx & xsave_mask) != xsave_mask)
+		cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */
 }
 
 static void xen_set_debugreg(int reg, unsigned long val)
@@ -407,7 +400,7 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 /*
  * load_gdt for early boot, when the gdt is only mapped once
  */
-static __init void xen_load_gdt_boot(const struct desc_ptr *dtr)
+static void __init xen_load_gdt_boot(const struct desc_ptr *dtr)
 {
 	unsigned long va = dtr->address;
 	unsigned int size = dtr->size + 1;
@@ -669,7 +662,7 @@ static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
  * Version of write_gdt_entry for use at early boot-time needed to
  * update an entry as simply as possible.
  */
-static __init void xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
+static void __init xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
 					    const void *desc, int type)
 {
 	switch (type) {
@@ -940,18 +933,18 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
 	return ret;
 }
 
-static const struct pv_info xen_info __initdata = {
+static const struct pv_info xen_info __initconst = {
 	.paravirt_enabled = 1,
 	.shared_kernel_pmd = 0,
 
 	.name = "Xen",
 };
 
-static const struct pv_init_ops xen_init_ops __initdata = {
+static const struct pv_init_ops xen_init_ops __initconst = {
 	.patch = xen_patch,
 };
 
-static const struct pv_cpu_ops xen_cpu_ops __initdata = {
+static const struct pv_cpu_ops xen_cpu_ops __initconst = {
 	.cpuid = xen_cpuid,
 
 	.set_debugreg = xen_set_debugreg,
@@ -1011,7 +1004,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.end_context_switch = xen_end_context_switch,
 };
 
-static const struct pv_apic_ops xen_apic_ops __initdata = {
+static const struct pv_apic_ops xen_apic_ops __initconst = {
 #ifdef CONFIG_X86_LOCAL_APIC
 	.startup_ipi_hook = paravirt_nop,
 #endif
@@ -1062,7 +1055,7 @@ int xen_panic_handler_init(void)
 	return 0;
 }
 
-static const struct machine_ops __initdata xen_machine_ops = {
+static const struct machine_ops xen_machine_ops __initconst = {
 	.restart = xen_restart,
 	.halt = xen_machine_halt,
 	.power_off = xen_machine_halt,
@@ -1339,7 +1332,7 @@ static int __cpuinit xen_hvm_cpu_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata xen_hvm_cpu_notifier = {
+static struct notifier_block xen_hvm_cpu_notifier __cpuinitdata = {
 	.notifier_call	= xen_hvm_cpu_notify,
 };
 
@@ -1388,7 +1381,7 @@ bool xen_hvm_need_lapic(void)
 }
 EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
 
-const __refconst struct hypervisor_x86 x86_hyper_xen_hvm = {
+const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = {
 	.name			= "Xen HVM",
 	.detect			= xen_hvm_platform,
 	.init_platform		= xen_hvm_guest_init,
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index 6a6fe893964..8bbb465b6f0 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -113,7 +113,7 @@ static void xen_halt(void)
 		xen_safe_halt();
 }
 
-static const struct pv_irq_ops xen_irq_ops __initdata = {
+static const struct pv_irq_ops xen_irq_ops __initconst = {
 	.save_fl = PV_CALLEE_SAVE(xen_save_fl),
 	.restore_fl = PV_CALLEE_SAVE(xen_restore_fl),
 	.irq_disable = PV_CALLEE_SAVE(xen_irq_disable),
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index c82df6c9c0f..02d75246037 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -565,13 +565,13 @@ pte_t xen_make_pte_debug(pteval_t pte)
 	if (io_page &&
 	    (xen_initial_domain() || addr >= ISA_END_ADDRESS)) {
 		other_addr = pfn_to_mfn(addr >> PAGE_SHIFT) << PAGE_SHIFT;
-		WARN(addr != other_addr,
+		WARN_ONCE(addr != other_addr,
 			"0x%lx is using VM_IO, but it is 0x%lx!\n",
 			(unsigned long)addr, (unsigned long)other_addr);
 	} else {
 		pteval_t iomap_set = (_pte.pte & PTE_FLAGS_MASK) & _PAGE_IOMAP;
 		other_addr = (_pte.pte & PTE_PFN_MASK);
-		WARN((addr == other_addr) && (!io_page) && (!iomap_set),
+		WARN_ONCE((addr == other_addr) && (!io_page) && (!iomap_set),
 			"0x%lx is missing VM_IO (and wasn't fixed)!\n",
 			(unsigned long)addr);
 	}
@@ -1054,7 +1054,7 @@ void xen_mm_pin_all(void)
  * that's before we have page structures to store the bits.  So do all
  * the book-keeping now.
  */
-static __init int xen_mark_pinned(struct mm_struct *mm, struct page *page,
+static int __init xen_mark_pinned(struct mm_struct *mm, struct page *page,
 				  enum pt_level level)
 {
 	SetPagePinned(page);
@@ -1187,7 +1187,7 @@ static void drop_other_mm_ref(void *info)
 
 	active_mm = percpu_read(cpu_tlbstate.active_mm);
 
-	if (active_mm == mm)
+	if (active_mm == mm && percpu_read(cpu_tlbstate.state) != TLBSTATE_OK)
 		leave_mm(smp_processor_id());
 
 	/* If this cpu still has a stale cr3 reference, then make sure
@@ -1271,13 +1271,27 @@ void xen_exit_mmap(struct mm_struct *mm)
 	spin_unlock(&mm->page_table_lock);
 }
 
-static __init void xen_pagetable_setup_start(pgd_t *base)
+static void __init xen_pagetable_setup_start(pgd_t *base)
 {
 }
 
+static __init void xen_mapping_pagetable_reserve(u64 start, u64 end)
+{
+	/* reserve the range used */
+	native_pagetable_reserve(start, end);
+
+	/* set as RW the rest */
+	printk(KERN_DEBUG "xen: setting RW the range %llx - %llx\n", end,
+			PFN_PHYS(pgt_buf_top));
+	while (end < PFN_PHYS(pgt_buf_top)) {
+		make_lowmem_page_readwrite(__va(end));
+		end += PAGE_SIZE;
+	}
+}
+
 static void xen_post_allocator_init(void);
 
-static __init void xen_pagetable_setup_done(pgd_t *base)
+static void __init xen_pagetable_setup_done(pgd_t *base)
 {
 	xen_setup_shared_info();
 	xen_post_allocator_init();
@@ -1473,16 +1487,20 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
 #endif
 }
 
-static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
-{
-	unsigned long pfn = pte_pfn(pte);
-
 #ifdef CONFIG_X86_32
+static pte_t __init mask_rw_pte(pte_t *ptep, pte_t pte)
+{
 	/* If there's an existing pte, then don't allow _PAGE_RW to be set */
 	if (pte_val_ma(*ptep) & _PAGE_PRESENT)
 		pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) &
 			       pte_val_ma(pte));
-#endif
+
+	return pte;
+}
+#else /* CONFIG_X86_64 */
+static pte_t __init mask_rw_pte(pte_t *ptep, pte_t pte)
+{
+	unsigned long pfn = pte_pfn(pte);
 
 	/*
 	 * If the new pfn is within the range of the newly allocated
@@ -1491,16 +1509,17 @@ static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
 	 * it is RO.
 	 */
 	if (((!is_early_ioremap_ptep(ptep) &&
-			pfn >= pgt_buf_start && pfn < pgt_buf_end)) ||
+			pfn >= pgt_buf_start && pfn < pgt_buf_top)) ||
 			(is_early_ioremap_ptep(ptep) && pfn != (pgt_buf_end - 1)))
 		pte = pte_wrprotect(pte);
 
 	return pte;
 }
+#endif /* CONFIG_X86_64 */
 
 /* Init-time set_pte while constructing initial pagetables, which
    doesn't allow RO pagetable pages to be remapped RW */
-static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
+static void __init xen_set_pte_init(pte_t *ptep, pte_t pte)
 {
 	pte = mask_rw_pte(ptep, pte);
 
@@ -1518,7 +1537,7 @@ static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
 
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
-static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
+static void __init xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
 {
 #ifdef CONFIG_FLATMEM
 	BUG_ON(mem_map);	/* should only be used early */
@@ -1528,7 +1547,7 @@ static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
 }
 
 /* Used for pmd and pud */
-static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
+static void __init xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
 {
 #ifdef CONFIG_FLATMEM
 	BUG_ON(mem_map);	/* should only be used early */
@@ -1538,13 +1557,13 @@ static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
 
 /* Early release_pte assumes that all pts are pinned, since there's
    only init_mm and anything attached to that is pinned. */
-static __init void xen_release_pte_init(unsigned long pfn)
+static void __init xen_release_pte_init(unsigned long pfn)
 {
 	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
 	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
 
-static __init void xen_release_pmd_init(unsigned long pfn)
+static void __init xen_release_pmd_init(unsigned long pfn)
 {
 	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
@@ -1670,7 +1689,7 @@ static void set_page_prot(void *addr, pgprot_t prot)
 		BUG();
 }
 
-static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
+static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
 {
 	unsigned pmdidx, pteidx;
 	unsigned ident_pte;
@@ -1753,7 +1772,7 @@ static void convert_pfn_mfn(void *v)
  * of the physical mapping once some sort of allocator has been set
  * up.
  */
-__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
+pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 					 unsigned long max_pfn)
 {
 	pud_t *l3;
@@ -1824,7 +1843,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
 static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
 
-static __init void xen_write_cr3_init(unsigned long cr3)
+static void __init xen_write_cr3_init(unsigned long cr3)
 {
 	unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
 
@@ -1861,7 +1880,7 @@ static __init void xen_write_cr3_init(unsigned long cr3)
 	pv_mmu_ops.write_cr3 = &xen_write_cr3;
 }
 
-__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
+pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd,
 					 unsigned long max_pfn)
 {
 	pmd_t *kernel_pmd;
@@ -1967,7 +1986,7 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot)
 #endif
 }
 
-__init void xen_ident_map_ISA(void)
+void __init xen_ident_map_ISA(void)
 {
 	unsigned long pa;
 
@@ -1990,7 +2009,7 @@ __init void xen_ident_map_ISA(void)
 	xen_flush_tlb();
 }
 
-static __init void xen_post_allocator_init(void)
+static void __init xen_post_allocator_init(void)
 {
 #ifdef CONFIG_XEN_DEBUG
 	pv_mmu_ops.make_pte = PV_CALLEE_SAVE(xen_make_pte_debug);
@@ -2027,7 +2046,7 @@ static void xen_leave_lazy_mmu(void)
 	preempt_enable();
 }
 
-static const struct pv_mmu_ops xen_mmu_ops __initdata = {
+static const struct pv_mmu_ops xen_mmu_ops __initconst = {
 	.read_cr2 = xen_read_cr2,
 	.write_cr2 = xen_write_cr2,
 
@@ -2100,6 +2119,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 
 void __init xen_init_mmu_ops(void)
 {
+	x86_init.mapping.pagetable_reserve = xen_mapping_pagetable_reserve;
 	x86_init.paging.pagetable_setup_start = xen_pagetable_setup_start;
 	x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
 	pv_mmu_ops = xen_mmu_ops;
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index 141eb0de8b0..58efeb9d544 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -522,11 +522,20 @@ static bool __init __early_alloc_p2m(unsigned long pfn)
 	/* Boundary cross-over for the edges: */
 	if (idx) {
 		unsigned long *p2m = extend_brk(PAGE_SIZE, PAGE_SIZE);
+		unsigned long *mid_mfn_p;
 
 		p2m_init(p2m);
 
 		p2m_top[topidx][mididx] = p2m;
 
+		/* For save/restore we need to MFN of the P2M saved */
+		
+		mid_mfn_p = p2m_top_mfn_p[topidx];
+		WARN(mid_mfn_p[mididx] != virt_to_mfn(p2m_missing),
+			"P2M_TOP_P[%d][%d] != MFN of p2m_missing!\n",
+			topidx, mididx);
+		mid_mfn_p[mididx] = virt_to_mfn(p2m);
+
 	}
 	return idx != 0;
 }
@@ -549,12 +558,29 @@ unsigned long __init set_phys_range_identity(unsigned long pfn_s,
 		pfn += P2M_MID_PER_PAGE * P2M_PER_PAGE)
 	{
 		unsigned topidx = p2m_top_index(pfn);
-		if (p2m_top[topidx] == p2m_mid_missing) {
-			unsigned long **mid = extend_brk(PAGE_SIZE, PAGE_SIZE);
+		unsigned long *mid_mfn_p;
+		unsigned long **mid;
+
+		mid = p2m_top[topidx];
+		mid_mfn_p = p2m_top_mfn_p[topidx];
+		if (mid == p2m_mid_missing) {
+			mid = extend_brk(PAGE_SIZE, PAGE_SIZE);
 
 			p2m_mid_init(mid);
 
 			p2m_top[topidx] = mid;
+
+			BUG_ON(mid_mfn_p != p2m_mid_missing_mfn);
+		}
+		/* And the save/restore P2M tables.. */
+		if (mid_mfn_p == p2m_mid_missing_mfn) {
+			mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE);
+			p2m_mid_mfn_init(mid_mfn_p);
+
+			p2m_top_mfn_p[topidx] = mid_mfn_p;
+			p2m_top_mfn[topidx] = virt_to_mfn(mid_mfn_p);
+			/* Note: we don't set mid_mfn_p[midix] here,
+		 	 * look in __early_alloc_p2m */
 		}
 	}
 
@@ -650,7 +676,7 @@ static unsigned long mfn_hash(unsigned long mfn)
 }
 
 /* Add an MFN override for a particular page */
-int m2p_add_override(unsigned long mfn, struct page *page)
+int m2p_add_override(unsigned long mfn, struct page *page, bool clear_pte)
 {
 	unsigned long flags;
 	unsigned long pfn;
@@ -662,7 +688,6 @@ int m2p_add_override(unsigned long mfn, struct page *page)
 	if (!PageHighMem(page)) {
 		address = (unsigned long)__va(pfn << PAGE_SHIFT);
 		ptep = lookup_address(address, &level);
-
 		if (WARN(ptep == NULL || level != PG_LEVEL_4K,
 					"m2p_add_override: pfn %lx not mapped", pfn))
 			return -EINVAL;
@@ -674,18 +699,17 @@ int m2p_add_override(unsigned long mfn, struct page *page)
 	if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn))))
 		return -ENOMEM;
 
-	if (!PageHighMem(page))
+	if (clear_pte && !PageHighMem(page))
 		/* Just zap old mapping for now */
 		pte_clear(&init_mm, address, ptep);
-
 	spin_lock_irqsave(&m2p_override_lock, flags);
 	list_add(&page->lru,  &m2p_overrides[mfn_hash(mfn)]);
 	spin_unlock_irqrestore(&m2p_override_lock, flags);
 
 	return 0;
 }
-
-int m2p_remove_override(struct page *page)
+EXPORT_SYMBOL_GPL(m2p_add_override);
+int m2p_remove_override(struct page *page, bool clear_pte)
 {
 	unsigned long flags;
 	unsigned long mfn;
@@ -713,7 +737,7 @@ int m2p_remove_override(struct page *page)
 	spin_unlock_irqrestore(&m2p_override_lock, flags);
 	set_phys_to_machine(pfn, page->index);
 
-	if (!PageHighMem(page))
+	if (clear_pte && !PageHighMem(page))
 		set_pte_at(&init_mm, address, ptep,
 				pfn_pte(pfn, PAGE_KERNEL));
 		/* No tlb flush necessary because the caller already
@@ -721,6 +745,7 @@ int m2p_remove_override(struct page *page)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(m2p_remove_override);
 
 struct page *m2p_find_override(unsigned long mfn)
 {
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index fa0269a9937..be1a464f6d6 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -50,7 +50,7 @@ phys_addr_t xen_extra_mem_start, xen_extra_mem_size;
  */
 #define EXTRA_MEM_RATIO		(10)
 
-static __init void xen_add_extra_mem(unsigned long pages)
+static void __init xen_add_extra_mem(unsigned long pages)
 {
 	unsigned long pfn;
 
@@ -166,7 +166,7 @@ static unsigned long __init xen_set_identity(const struct e820entry *list,
 		if (last > end)
 			continue;
 
-		if (entry->type == E820_RAM) {
+		if ((entry->type == E820_RAM) || (entry->type == E820_UNUSABLE)) {
 			if (start > start_pci)
 				identity += set_phys_range_identity(
 						PFN_UP(start_pci), PFN_DOWN(start));
@@ -227,7 +227,11 @@ char * __init xen_memory_setup(void)
 
 	memcpy(map_raw, map, sizeof(map));
 	e820.nr_map = 0;
+#ifdef CONFIG_X86_32
 	xen_extra_mem_start = mem_end;
+#else
+	xen_extra_mem_start = max((1ULL << 32), mem_end);
+#endif
 	for (i = 0; i < memmap.nr_entries; i++) {
 		unsigned long long end;
 
@@ -336,7 +340,7 @@ static void __init fiddle_vdso(void)
 #endif
 }
 
-static __cpuinit int register_callback(unsigned type, const void *func)
+static int __cpuinit register_callback(unsigned type, const void *func)
 {
 	struct callback_register callback = {
 		.type = type,
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 30612441ed9..41038c01de4 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -46,18 +46,17 @@ static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id);
 static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id);
 
 /*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
+ * Reschedule call back.
  */
 static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
 {
 	inc_irq_stat(irq_resched_count);
+	scheduler_ipi();
 
 	return IRQ_HANDLED;
 }
 
-static __cpuinit void cpu_bringup(void)
+static void __cpuinit cpu_bringup(void)
 {
 	int cpu = smp_processor_id();
 
@@ -85,7 +84,7 @@ static __cpuinit void cpu_bringup(void)
 	wmb();			/* make sure everything is out */
 }
 
-static __cpuinit void cpu_bringup_and_idle(void)
+static void __cpuinit cpu_bringup_and_idle(void)
 {
 	cpu_bringup();
 	cpu_idle();
@@ -242,7 +241,7 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-static __cpuinit int
+static int __cpuinit
 cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 {
 	struct vcpu_guest_context *ctxt;
@@ -486,7 +485,7 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static const struct smp_ops xen_smp_ops __initdata = {
+static const struct smp_ops xen_smp_ops __initconst = {
 	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
 	.smp_prepare_cpus = xen_smp_prepare_cpus,
 	.smp_cpus_done = xen_smp_cpus_done,
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 2e2d370a47b..5158c505bef 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -26,8 +26,6 @@
 
 #include "xen-ops.h"
 
-#define XEN_SHIFT 22
-
 /* Xen may fire a timer up to this many ns early */
 #define TIMER_SLOP	100000
 #define NS_PER_TICK	(1000000000LL / HZ)
@@ -211,8 +209,6 @@ static struct clocksource xen_clocksource __read_mostly = {
 	.rating = 400,
 	.read = xen_clocksource_get_cycles,
 	.mask = ~0,
-	.mult = 1<<XEN_SHIFT,		/* time directly in nanoseconds */
-	.shift = XEN_SHIFT,
 	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -439,16 +435,16 @@ void xen_timer_resume(void)
 	}
 }
 
-static const struct pv_time_ops xen_time_ops __initdata = {
+static const struct pv_time_ops xen_time_ops __initconst = {
 	.sched_clock = xen_clocksource_read,
 };
 
-static __init void xen_time_init(void)
+static void __init xen_time_init(void)
 {
 	int cpu = smp_processor_id();
 	struct timespec tp;
 
-	clocksource_register(&xen_clocksource);
+	clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);
 
 	if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) {
 		/* Successfully turned off 100Hz tick, so we have the
@@ -468,7 +464,7 @@ static __init void xen_time_init(void)
 	xen_setup_cpu_clockevents();
 }
 
-__init void xen_init_time_ops(void)
+void __init xen_init_time_ops(void)
 {
 	pv_time_ops = xen_time_ops;
 
@@ -490,7 +486,7 @@ static void xen_hvm_setup_cpu_clockevents(void)
 	xen_setup_cpu_clockevents();
 }
 
-__init void xen_hvm_init_time_ops(void)
+void __init xen_hvm_init_time_ops(void)
 {
 	/* vector callback is needed otherwise we cannot receive interrupts
 	 * on cpu > 0 and at this point we don't know how many cpus are
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 3112f55638c..97dfdc8757b 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -74,7 +74,7 @@ static inline void xen_hvm_smp_init(void) {}
 
 #ifdef CONFIG_PARAVIRT_SPINLOCKS
 void __init xen_init_spinlocks(void);
-__cpuinit void xen_init_lock_cpu(int cpu);
+void __cpuinit xen_init_lock_cpu(int cpu);
 void xen_uninit_lock_cpu(int cpu);
 #else
 static inline void xen_init_spinlocks(void)
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 1d730b5579a..7c275f5d0df 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -9,7 +9,6 @@ config XTENSA
 	select HAVE_IDE
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  Xtensa processors are 32-bit RISC machines designed by Tensilica
 	  primarily for embedded systems.  These processors are both
diff --git a/arch/xtensa/include/asm/dma.h b/arch/xtensa/include/asm/dma.h
index 137ca3945b0..bb099a373b5 100644
--- a/arch/xtensa/include/asm/dma.h
+++ b/arch/xtensa/include/asm/dma.h
@@ -37,7 +37,7 @@
  *	the size of the statically mapped kernel segment
  *	(XCHAL_KSEG_{CACHED,BYPASS}_SIZE), ie. 128 MB.
  *
- * NOTE: When the entire KSEG area is DMA capable, we substract
+ * NOTE: When the entire KSEG area is DMA capable, we subtract
  *	one from the max address so that the virt_to_phys() macro
  *	works correctly on the address (otherwise the address
  *	enters another area, and virt_to_phys() may not return
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 5fd01f6aaf3..6223f3346b5 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -1026,7 +1026,7 @@ ENTRY(fast_syscall_unrecoverable)
  * TRY	 adds an entry to the __ex_table fixup table for the immediately
  *	 following instruction.
  *
- * CATCH catches any exception that occurred at one of the preceeding TRY
+ * CATCH catches any exception that occurred at one of the preceding TRY
  *       statements and continues from there
  *
  * Usage TRY	l32i	a0, a1, 0
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index d77089df412..4340ee076bd 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -64,47 +64,41 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
-	int j;
-
-	seq_printf(p, "%*s: ", prec, "NMI");
-	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", nmi_count(j));
-	seq_putc(p, '\n');
 	seq_printf(p, "%*s: ", prec, "ERR");
 	seq_printf(p, "%10u\n", atomic_read(&irq_err_count));
 	return 0;
 }
 
-static void xtensa_irq_mask(struct irq_chip *d)
+static void xtensa_irq_mask(struct irq_data *d)
 {
 	cached_irq_mask &= ~(1 << d->irq);
 	set_sr (cached_irq_mask, INTENABLE);
 }
 
-static void xtensa_irq_unmask(struct irq_chip *d)
+static void xtensa_irq_unmask(struct irq_data *d)
 {
 	cached_irq_mask |= 1 << d->irq;
 	set_sr (cached_irq_mask, INTENABLE);
 }
 
-static void xtensa_irq_enable(struct irq_chip *d)
+static void xtensa_irq_enable(struct irq_data *d)
 {
 	variant_irq_enable(d->irq);
 	xtensa_irq_unmask(d->irq);
 }
 
-static void xtensa_irq_disable(struct irq_chip *d)
+static void xtensa_irq_disable(struct irq_data *d)
 {
 	xtensa_irq_mask(d->irq);
 	variant_irq_disable(d->irq);
 }
 
-static void xtensa_irq_ack(struct irq_chip *d)
+static void xtensa_irq_ack(struct irq_data *d)
 {
 	set_sr(1 << d->irq, INTCLEAR);
 }
 
-static int xtensa_irq_retrigger(struct irq_chip *d)
+static int xtensa_irq_retrigger(struct irq_data *d)
 {
 	set_sr (1 << d->irq, INTSET);
 	return 1;
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 2bef5705ce2..471fdcc5df8 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -114,6 +114,13 @@ struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup)
 }
 EXPORT_SYMBOL_GPL(cgroup_to_blkio_cgroup);
 
+struct blkio_cgroup *task_blkio_cgroup(struct task_struct *tsk)
+{
+	return container_of(task_subsys_state(tsk, blkio_subsys_id),
+			    struct blkio_cgroup, css);
+}
+EXPORT_SYMBOL_GPL(task_blkio_cgroup);
+
 static inline void
 blkio_update_group_weight(struct blkio_group *blkg, unsigned int weight)
 {
@@ -868,7 +875,7 @@ static void blkio_update_policy_rule(struct blkio_policy_node *oldpn,
 }
 
 /*
- * Some rules/values in blkg have changed. Propogate those to respective
+ * Some rules/values in blkg have changed. Propagate those to respective
  * policies.
  */
 static void blkio_update_blkg_policy(struct blkio_cgroup *blkcg,
@@ -903,7 +910,7 @@ static void blkio_update_blkg_policy(struct blkio_cgroup *blkcg,
 }
 
 /*
- * A policy node rule has been updated. Propogate this update to all the
+ * A policy node rule has been updated. Propagate this update to all the
  * block groups which might be affected by this update.
  */
 static void blkio_update_policy_node_blkg(struct blkio_cgroup *blkcg,
diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h
index 10919fae2d3..c774930cc20 100644
--- a/block/blk-cgroup.h
+++ b/block/blk-cgroup.h
@@ -291,6 +291,7 @@ static inline void blkiocg_set_start_empty_time(struct blkio_group *blkg) {}
 #if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE)
 extern struct blkio_cgroup blkio_root_cgroup;
 extern struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup);
+extern struct blkio_cgroup *task_blkio_cgroup(struct task_struct *tsk);
 extern void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
 	struct blkio_group *blkg, void *key, dev_t dev,
 	enum blkio_policy_id plid);
@@ -314,6 +315,8 @@ void blkiocg_update_io_remove_stats(struct blkio_group *blkg,
 struct cgroup;
 static inline struct blkio_cgroup *
 cgroup_to_blkio_cgroup(struct cgroup *cgroup) { return NULL; }
+static inline struct blkio_cgroup *
+task_blkio_cgroup(struct task_struct *tsk) { return NULL; }
 
 static inline void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
 		struct blkio_group *blkg, void *key, dev_t dev,
diff --git a/block/blk-core.c b/block/blk-core.c
index e0a06236393..3fe00a14822 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -198,26 +198,13 @@ void blk_dump_rq_flags(struct request *rq, char *msg)
 }
 EXPORT_SYMBOL(blk_dump_rq_flags);
 
-/*
- * Make sure that plugs that were pending when this function was entered,
- * are now complete and requests pushed to the queue.
-*/
-static inline void queue_sync_plugs(struct request_queue *q)
-{
-	/*
-	 * If the current process is plugged and has barriers submitted,
-	 * we will livelock if we don't unplug first.
-	 */
-	blk_flush_plug(current);
-}
-
 static void blk_delay_work(struct work_struct *work)
 {
 	struct request_queue *q;
 
 	q = container_of(work, struct request_queue, delay_work.work);
 	spin_lock_irq(q->queue_lock);
-	__blk_run_queue(q, false);
+	__blk_run_queue(q);
 	spin_unlock_irq(q->queue_lock);
 }
 
@@ -233,7 +220,8 @@ static void blk_delay_work(struct work_struct *work)
  */
 void blk_delay_queue(struct request_queue *q, unsigned long msecs)
 {
-	schedule_delayed_work(&q->delay_work, msecs_to_jiffies(msecs));
+	queue_delayed_work(kblockd_workqueue, &q->delay_work,
+				msecs_to_jiffies(msecs));
 }
 EXPORT_SYMBOL(blk_delay_queue);
 
@@ -251,7 +239,7 @@ void blk_start_queue(struct request_queue *q)
 	WARN_ON(!irqs_disabled());
 
 	queue_flag_clear(QUEUE_FLAG_STOPPED, q);
-	__blk_run_queue(q, false);
+	__blk_run_queue(q);
 }
 EXPORT_SYMBOL(blk_start_queue);
 
@@ -298,38 +286,44 @@ void blk_sync_queue(struct request_queue *q)
 {
 	del_timer_sync(&q->timeout);
 	cancel_delayed_work_sync(&q->delay_work);
-	queue_sync_plugs(q);
 }
 EXPORT_SYMBOL(blk_sync_queue);
 
 /**
  * __blk_run_queue - run a single device queue
  * @q:	The queue to run
- * @force_kblockd: Don't run @q->request_fn directly.  Use kblockd.
  *
  * Description:
  *    See @blk_run_queue. This variant must be called with the queue lock
  *    held and interrupts disabled.
- *
  */
-void __blk_run_queue(struct request_queue *q, bool force_kblockd)
+void __blk_run_queue(struct request_queue *q)
 {
 	if (unlikely(blk_queue_stopped(q)))
 		return;
 
-	/*
-	 * Only recurse once to avoid overrunning the stack, let the unplug
-	 * handling reinvoke the handler shortly if we already got there.
-	 */
-	if (!force_kblockd && !queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
-		q->request_fn(q);
-		queue_flag_clear(QUEUE_FLAG_REENTER, q);
-	} else
-		queue_delayed_work(kblockd_workqueue, &q->delay_work, 0);
+	q->request_fn(q);
 }
 EXPORT_SYMBOL(__blk_run_queue);
 
 /**
+ * blk_run_queue_async - run a single device queue in workqueue context
+ * @q:	The queue to run
+ *
+ * Description:
+ *    Tells kblockd to perform the equivalent of @blk_run_queue on behalf
+ *    of us.
+ */
+void blk_run_queue_async(struct request_queue *q)
+{
+	if (likely(!blk_queue_stopped(q))) {
+		__cancel_delayed_work(&q->delay_work);
+		queue_delayed_work(kblockd_workqueue, &q->delay_work, 0);
+	}
+}
+EXPORT_SYMBOL(blk_run_queue_async);
+
+/**
  * blk_run_queue - run a single device queue
  * @q: The queue to run
  *
@@ -342,7 +336,7 @@ void blk_run_queue(struct request_queue *q)
 	unsigned long flags;
 
 	spin_lock_irqsave(q->queue_lock, flags);
-	__blk_run_queue(q, false);
+	__blk_run_queue(q);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 EXPORT_SYMBOL(blk_run_queue);
@@ -991,7 +985,7 @@ void blk_insert_request(struct request_queue *q, struct request *rq,
 		blk_queue_end_tag(q, rq);
 
 	add_acct_request(q, rq, where);
-	__blk_run_queue(q, false);
+	__blk_run_queue(q);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 EXPORT_SYMBOL(blk_insert_request);
@@ -1184,7 +1178,7 @@ static bool bio_attempt_front_merge(struct request_queue *q,
 
 /*
  * Attempts to merge with the plugged list in the current process. Returns
- * true if merge was succesful, otherwise false.
+ * true if merge was successful, otherwise false.
  */
 static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
 			       struct bio *bio)
@@ -1311,7 +1305,15 @@ get_rq:
 
 	plug = current->plug;
 	if (plug) {
-		if (!plug->should_sort && !list_empty(&plug->list)) {
+		/*
+		 * If this is the first request added after a plug, fire
+		 * of a plug trace. If others have been added before, check
+		 * if we have multiple devices in this plug. If so, make a
+		 * note to sort the list before dispatch.
+		 */
+		if (list_empty(&plug->list))
+			trace_block_plug(q);
+		else if (!plug->should_sort) {
 			struct request *__rq;
 
 			__rq = list_entry_rq(plug->list.prev);
@@ -1327,7 +1329,7 @@ get_rq:
 	} else {
 		spin_lock_irq(q->queue_lock);
 		add_acct_request(q, req, where);
-		__blk_run_queue(q, false);
+		__blk_run_queue(q);
 out_unlock:
 		spin_unlock_irq(q->queue_lock);
 	}
@@ -2163,7 +2165,7 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
 	 * size, something has gone terribly wrong.
 	 */
 	if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
-		printk(KERN_ERR "blk: request botched\n");
+		blk_dump_rq_flags(req, "request botched");
 		req->__data_len = blk_rq_cur_bytes(req);
 	}
 
@@ -2644,6 +2646,7 @@ void blk_start_plug(struct blk_plug *plug)
 
 	plug->magic = PLUG_MAGIC;
 	INIT_LIST_HEAD(&plug->list);
+	INIT_LIST_HEAD(&plug->cb_list);
 	plug->should_sort = 0;
 
 	/*
@@ -2665,36 +2668,96 @@ static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b)
 	struct request *rqa = container_of(a, struct request, queuelist);
 	struct request *rqb = container_of(b, struct request, queuelist);
 
-	return !(rqa->q == rqb->q);
+	return !(rqa->q <= rqb->q);
 }
 
-static void flush_plug_list(struct blk_plug *plug)
+/*
+ * If 'from_schedule' is true, then postpone the dispatch of requests
+ * until a safe kblockd context. We due this to avoid accidental big
+ * additional stack usage in driver dispatch, in places where the originally
+ * plugger did not intend it.
+ */
+static void queue_unplugged(struct request_queue *q, unsigned int depth,
+			    bool from_schedule)
+	__releases(q->queue_lock)
+{
+	trace_block_unplug(q, depth, !from_schedule);
+
+	/*
+	 * If we are punting this to kblockd, then we can safely drop
+	 * the queue_lock before waking kblockd (which needs to take
+	 * this lock).
+	 */
+	if (from_schedule) {
+		spin_unlock(q->queue_lock);
+		blk_run_queue_async(q);
+	} else {
+		__blk_run_queue(q);
+		spin_unlock(q->queue_lock);
+	}
+
+}
+
+static void flush_plug_callbacks(struct blk_plug *plug)
+{
+	LIST_HEAD(callbacks);
+
+	if (list_empty(&plug->cb_list))
+		return;
+
+	list_splice_init(&plug->cb_list, &callbacks);
+
+	while (!list_empty(&callbacks)) {
+		struct blk_plug_cb *cb = list_first_entry(&callbacks,
+							  struct blk_plug_cb,
+							  list);
+		list_del(&cb->list);
+		cb->callback(cb);
+	}
+}
+
+void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule)
 {
 	struct request_queue *q;
 	unsigned long flags;
 	struct request *rq;
+	LIST_HEAD(list);
+	unsigned int depth;
 
 	BUG_ON(plug->magic != PLUG_MAGIC);
 
+	flush_plug_callbacks(plug);
 	if (list_empty(&plug->list))
 		return;
 
-	if (plug->should_sort)
-		list_sort(NULL, &plug->list, plug_rq_cmp);
+	list_splice_init(&plug->list, &list);
+
+	if (plug->should_sort) {
+		list_sort(NULL, &list, plug_rq_cmp);
+		plug->should_sort = 0;
+	}
 
 	q = NULL;
+	depth = 0;
+
+	/*
+	 * Save and disable interrupts here, to avoid doing it for every
+	 * queue lock we have to take.
+	 */
 	local_irq_save(flags);
-	while (!list_empty(&plug->list)) {
-		rq = list_entry_rq(plug->list.next);
+	while (!list_empty(&list)) {
+		rq = list_entry_rq(list.next);
 		list_del_init(&rq->queuelist);
 		BUG_ON(!(rq->cmd_flags & REQ_ON_PLUG));
 		BUG_ON(!rq->q);
 		if (rq->q != q) {
-			if (q) {
-				__blk_run_queue(q, false);
-				spin_unlock(q->queue_lock);
-			}
+			/*
+			 * This drops the queue lock
+			 */
+			if (q)
+				queue_unplugged(q, depth, from_schedule);
 			q = rq->q;
+			depth = 0;
 			spin_lock(q->queue_lock);
 		}
 		rq->cmd_flags &= ~REQ_ON_PLUG;
@@ -2706,38 +2769,27 @@ static void flush_plug_list(struct blk_plug *plug)
 			__elv_add_request(q, rq, ELEVATOR_INSERT_FLUSH);
 		else
 			__elv_add_request(q, rq, ELEVATOR_INSERT_SORT_MERGE);
-	}
 
-	if (q) {
-		__blk_run_queue(q, false);
-		spin_unlock(q->queue_lock);
+		depth++;
 	}
 
-	BUG_ON(!list_empty(&plug->list));
-	local_irq_restore(flags);
-}
-
-static void __blk_finish_plug(struct task_struct *tsk, struct blk_plug *plug)
-{
-	flush_plug_list(plug);
+	/*
+	 * This drops the queue lock
+	 */
+	if (q)
+		queue_unplugged(q, depth, from_schedule);
 
-	if (plug == tsk->plug)
-		tsk->plug = NULL;
+	local_irq_restore(flags);
 }
 
 void blk_finish_plug(struct blk_plug *plug)
 {
-	if (plug)
-		__blk_finish_plug(current, plug);
-}
-EXPORT_SYMBOL(blk_finish_plug);
+	blk_flush_plug_list(plug, false);
 
-void __blk_flush_plug(struct task_struct *tsk, struct blk_plug *plug)
-{
-	__blk_finish_plug(tsk, plug);
-	tsk->plug = plug;
+	if (plug == current->plug)
+		current->plug = NULL;
 }
-EXPORT_SYMBOL(__blk_flush_plug);
+EXPORT_SYMBOL(blk_finish_plug);
 
 int __init blk_dev_init(void)
 {
diff --git a/block/blk-exec.c b/block/blk-exec.c
index 7482b7fa863..81e31819a59 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -55,7 +55,7 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
 	WARN_ON(irqs_disabled());
 	spin_lock_irq(q->queue_lock);
 	__elv_add_request(q, rq, where);
-	__blk_run_queue(q, false);
+	__blk_run_queue(q);
 	/* the queue is stopped so it won't be plugged+unplugged */
 	if (rq->cmd_type == REQ_TYPE_PM_RESUME)
 		q->request_fn(q);
diff --git a/block/blk-flush.c b/block/blk-flush.c
index 93d5fd8e51e..6c9b5e189e6 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -218,7 +218,7 @@ static void flush_end_io(struct request *flush_rq, int error)
 	 * request_fn may confuse the driver.  Always use kblockd.
 	 */
 	if (queued)
-		__blk_run_queue(q, true);
+		blk_run_queue_async(q);
 }
 
 /**
@@ -261,7 +261,7 @@ static bool blk_kick_flush(struct request_queue *q)
 	q->flush_rq.end_io = flush_end_io;
 
 	q->flush_pending_idx ^= 1;
-	elv_insert(q, &q->flush_rq, ELEVATOR_INSERT_REQUEUE);
+	list_add_tail(&q->flush_rq.queuelist, &q->queue_head);
 	return true;
 }
 
@@ -274,14 +274,14 @@ static void flush_data_end_io(struct request *rq, int error)
 	 * the comment in flush_end_io().
 	 */
 	if (blk_flush_complete_seq(rq, REQ_FSEQ_DATA, error))
-		__blk_run_queue(q, true);
+		blk_run_queue_async(q);
 }
 
 /**
  * blk_insert_flush - insert a new FLUSH/FUA request
  * @rq: request to insert
  *
- * To be called from elv_insert() for %ELEVATOR_INSERT_FLUSH insertions.
+ * To be called from __elv_add_request() for %ELEVATOR_INSERT_FLUSH insertions.
  * @rq is being submitted.  Analyze what needs to be done and put it on the
  * right queue.
  *
@@ -312,7 +312,7 @@ void blk_insert_flush(struct request *rq)
 	 */
 	if ((policy & REQ_FSEQ_DATA) &&
 	    !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
-		list_add(&rq->queuelist, &q->queue_head);
+		list_add_tail(&rq->queuelist, &q->queue_head);
 		return;
 	}
 
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 54bcba6c02a..129b9e209a3 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -30,6 +30,8 @@
 
 static struct kmem_cache *integrity_cachep;
 
+static const char *bi_unsupported_name = "unsupported";
+
 /**
  * blk_rq_count_integrity_sg - Count number of integrity scatterlist elements
  * @q:		request queue
@@ -358,6 +360,14 @@ static struct kobj_type integrity_ktype = {
 	.release	= blk_integrity_release,
 };
 
+bool blk_integrity_is_initialized(struct gendisk *disk)
+{
+	struct blk_integrity *bi = blk_get_integrity(disk);
+
+	return (bi && bi->name && strcmp(bi->name, bi_unsupported_name) != 0);
+}
+EXPORT_SYMBOL(blk_integrity_is_initialized);
+
 /**
  * blk_integrity_register - Register a gendisk as being integrity-capable
  * @disk:	struct gendisk pointer to make integrity-aware
@@ -407,7 +417,7 @@ int blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
 		bi->get_tag_fn = template->get_tag_fn;
 		bi->tag_size = template->tag_size;
 	} else
-		bi->name = "unsupported";
+		bi->name = bi_unsupported_name;
 
 	return 0;
 }
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 261c75c665a..bd236313f35 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -66,14 +66,14 @@ queue_requests_store(struct request_queue *q, const char *page, size_t count)
 
 	if (rl->count[BLK_RW_SYNC] >= q->nr_requests) {
 		blk_set_queue_full(q, BLK_RW_SYNC);
-	} else if (rl->count[BLK_RW_SYNC]+1 <= q->nr_requests) {
+	} else {
 		blk_clear_queue_full(q, BLK_RW_SYNC);
 		wake_up(&rl->wait[BLK_RW_SYNC]);
 	}
 
 	if (rl->count[BLK_RW_ASYNC] >= q->nr_requests) {
 		blk_set_queue_full(q, BLK_RW_ASYNC);
-	} else if (rl->count[BLK_RW_ASYNC]+1 <= q->nr_requests) {
+	} else {
 		blk_clear_queue_full(q, BLK_RW_ASYNC);
 		wake_up(&rl->wait[BLK_RW_ASYNC]);
 	}
@@ -498,7 +498,6 @@ int blk_register_queue(struct gendisk *disk)
 {
 	int ret;
 	struct device *dev = disk_to_dev(disk);
-
 	struct request_queue *q = disk->queue;
 
 	if (WARN_ON(!q))
@@ -509,8 +508,10 @@ int blk_register_queue(struct gendisk *disk)
 		return ret;
 
 	ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
-	if (ret < 0)
+	if (ret < 0) {
+		blk_trace_remove_sysfs(dev);
 		return ret;
+	}
 
 	kobject_uevent(&q->kobj, KOBJ_ADD);
 
@@ -521,7 +522,7 @@ int blk_register_queue(struct gendisk *disk)
 	if (ret) {
 		kobject_uevent(&q->kobj, KOBJ_REMOVE);
 		kobject_del(&q->kobj);
-		blk_trace_remove_sysfs(disk_to_dev(disk));
+		blk_trace_remove_sysfs(dev);
 		kobject_put(&dev->kobj);
 		return ret;
 	}
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 5352bdafbcf..252a81a306f 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -77,7 +77,7 @@ struct throtl_grp {
 	unsigned long slice_end[2];
 
 	/* Some throttle limits got updated for the group */
-	bool limits_changed;
+	int limits_changed;
 };
 
 struct throtl_data
@@ -102,7 +102,7 @@ struct throtl_data
 	/* Work for dispatching throttled bios */
 	struct delayed_work throtl_work;
 
-	bool limits_changed;
+	int limits_changed;
 };
 
 enum tg_state_flags {
@@ -160,9 +160,8 @@ static void throtl_put_tg(struct throtl_grp *tg)
 }
 
 static struct throtl_grp * throtl_find_alloc_tg(struct throtl_data *td,
-			struct cgroup *cgroup)
+			struct blkio_cgroup *blkcg)
 {
-	struct blkio_cgroup *blkcg = cgroup_to_blkio_cgroup(cgroup);
 	struct throtl_grp *tg = NULL;
 	void *key = td;
 	struct backing_dev_info *bdi = &td->queue->backing_dev_info;
@@ -229,12 +228,12 @@ done:
 
 static struct throtl_grp * throtl_get_tg(struct throtl_data *td)
 {
-	struct cgroup *cgroup;
 	struct throtl_grp *tg = NULL;
+	struct blkio_cgroup *blkcg;
 
 	rcu_read_lock();
-	cgroup = task_cgroup(current, blkio_subsys_id);
-	tg = throtl_find_alloc_tg(td, cgroup);
+	blkcg = task_blkio_cgroup(current);
+	tg = throtl_find_alloc_tg(td, blkcg);
 	if (!tg)
 		tg = &td->root_tg;
 	rcu_read_unlock();
@@ -916,7 +915,7 @@ static void throtl_update_blkio_group_common(struct throtl_data *td,
 /*
  * For all update functions, key should be a valid pointer because these
  * update functions are called under blkcg_lock, that means, blkg is
- * valid and in turn key is valid. queue exit path can not race becuase
+ * valid and in turn key is valid. queue exit path can not race because
  * of blkcg_lock
  *
  * Can not take queue lock in update functions as queue lock under blkcg_lock
diff --git a/block/blk.h b/block/blk.h
index c8db371a921..61263463e38 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -32,7 +32,7 @@ enum rq_atomic_flags {
 
 /*
  * EH timer and IO completion will both attempt to 'grab' the request, make
- * sure that only one of them suceeds
+ * sure that only one of them succeeds
  */
 static inline int blk_mark_rq_complete(struct request *rq)
 {
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 7785169f3c8..ab7a9e6a9b1 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -888,7 +888,7 @@ cfq_group_notify_queue_add(struct cfq_data *cfqd, struct cfq_group *cfqg)
 	/*
 	 * Currently put the group at the end. Later implement something
 	 * so that groups get lesser vtime based on their weights, so that
-	 * if group does not loose all if it was not continously backlogged.
+	 * if group does not loose all if it was not continuously backlogged.
 	 */
 	n = rb_last(&st->rb);
 	if (n) {
@@ -1014,10 +1014,9 @@ void cfq_update_blkio_group_weight(void *key, struct blkio_group *blkg,
 	cfqg->needs_update = true;
 }
 
-static struct cfq_group *
-cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create)
+static struct cfq_group * cfq_find_alloc_cfqg(struct cfq_data *cfqd,
+		struct blkio_cgroup *blkcg, int create)
 {
-	struct blkio_cgroup *blkcg = cgroup_to_blkio_cgroup(cgroup);
 	struct cfq_group *cfqg = NULL;
 	void *key = cfqd;
 	int i, j;
@@ -1079,12 +1078,12 @@ done:
  */
 static struct cfq_group *cfq_get_cfqg(struct cfq_data *cfqd, int create)
 {
-	struct cgroup *cgroup;
+	struct blkio_cgroup *blkcg;
 	struct cfq_group *cfqg = NULL;
 
 	rcu_read_lock();
-	cgroup = task_cgroup(current, blkio_subsys_id);
-	cfqg = cfq_find_alloc_cfqg(cfqd, cgroup, create);
+	blkcg = task_blkio_cgroup(current);
+	cfqg = cfq_find_alloc_cfqg(cfqd, blkcg, create);
 	if (!cfqg && create)
 		cfqg = &cfqd->root_group;
 	rcu_read_unlock();
@@ -2582,28 +2581,20 @@ static void cfq_put_queue(struct cfq_queue *cfqq)
 }
 
 /*
- * Must always be called with the rcu_read_lock() held
+ * Call func for each cic attached to this ioc.
  */
 static void
-__call_for_each_cic(struct io_context *ioc,
-		    void (*func)(struct io_context *, struct cfq_io_context *))
+call_for_each_cic(struct io_context *ioc,
+		  void (*func)(struct io_context *, struct cfq_io_context *))
 {
 	struct cfq_io_context *cic;
 	struct hlist_node *n;
 
+	rcu_read_lock();
+
 	hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list)
 		func(ioc, cic);
-}
 
-/*
- * Call func for each cic attached to this ioc.
- */
-static void
-call_for_each_cic(struct io_context *ioc,
-		  void (*func)(struct io_context *, struct cfq_io_context *))
-{
-	rcu_read_lock();
-	__call_for_each_cic(ioc, func);
 	rcu_read_unlock();
 }
 
@@ -2664,7 +2655,7 @@ static void cfq_free_io_context(struct io_context *ioc)
 	 * should be ok to iterate over the known list, we will see all cic's
 	 * since no new ones are added.
 	 */
-	__call_for_each_cic(ioc, cic_free_func);
+	call_for_each_cic(ioc, cic_free_func);
 }
 
 static void cfq_put_cooperator(struct cfq_queue *cfqq)
@@ -3368,7 +3359,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 			    cfqd->busy_queues > 1) {
 				cfq_del_timer(cfqd, cfqq);
 				cfq_clear_cfqq_wait_request(cfqq);
-				__blk_run_queue(cfqd->queue, false);
+				__blk_run_queue(cfqd->queue);
 			} else {
 				cfq_blkiocg_update_idle_time_stats(
 						&cfqq->cfqg->blkg);
@@ -3383,7 +3374,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		 * this new queue is RT and the current one is BE
 		 */
 		cfq_preempt_queue(cfqd, cfqq);
-		__blk_run_queue(cfqd->queue, false);
+		__blk_run_queue(cfqd->queue);
 	}
 }
 
@@ -3743,7 +3734,7 @@ static void cfq_kick_queue(struct work_struct *work)
 	struct request_queue *q = cfqd->queue;
 
 	spin_lock_irq(q->queue_lock);
-	__blk_run_queue(cfqd->queue, false);
+	__blk_run_queue(cfqd->queue);
 	spin_unlock_irq(q->queue_lock);
 }
 
diff --git a/block/elevator.c b/block/elevator.c
index c387d316873..45ca1e34f58 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -610,7 +610,7 @@ void elv_requeue_request(struct request_queue *q, struct request *rq)
 
 	rq->cmd_flags &= ~REQ_STARTED;
 
-	elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE);
+	__elv_add_request(q, rq, ELEVATOR_INSERT_REQUEUE);
 }
 
 void elv_drain_elevator(struct request_queue *q)
@@ -642,7 +642,7 @@ void elv_quiesce_start(struct request_queue *q)
 	 */
 	elv_drain_elevator(q);
 	while (q->rq.elvpriv) {
-		__blk_run_queue(q, false);
+		__blk_run_queue(q);
 		spin_unlock_irq(q->queue_lock);
 		msleep(10);
 		spin_lock_irq(q->queue_lock);
@@ -655,12 +655,26 @@ void elv_quiesce_end(struct request_queue *q)
 	queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
 }
 
-void elv_insert(struct request_queue *q, struct request *rq, int where)
+void __elv_add_request(struct request_queue *q, struct request *rq, int where)
 {
 	trace_block_rq_insert(q, rq);
 
 	rq->q = q;
 
+	BUG_ON(rq->cmd_flags & REQ_ON_PLUG);
+
+	if (rq->cmd_flags & REQ_SOFTBARRIER) {
+		/* barriers are scheduling boundary, update end_sector */
+		if (rq->cmd_type == REQ_TYPE_FS ||
+		    (rq->cmd_flags & REQ_DISCARD)) {
+			q->end_sector = rq_end_sector(rq);
+			q->boundary_rq = rq;
+		}
+	} else if (!(rq->cmd_flags & REQ_ELVPRIV) &&
+		    (where == ELEVATOR_INSERT_SORT ||
+		     where == ELEVATOR_INSERT_SORT_MERGE))
+		where = ELEVATOR_INSERT_BACK;
+
 	switch (where) {
 	case ELEVATOR_INSERT_REQUEUE:
 	case ELEVATOR_INSERT_FRONT:
@@ -682,7 +696,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
 		 *   with anything.  There's no point in delaying queue
 		 *   processing.
 		 */
-		__blk_run_queue(q, false);
+		__blk_run_queue(q);
 		break;
 
 	case ELEVATOR_INSERT_SORT_MERGE:
@@ -722,24 +736,6 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
 		BUG();
 	}
 }
-
-void __elv_add_request(struct request_queue *q, struct request *rq, int where)
-{
-	BUG_ON(rq->cmd_flags & REQ_ON_PLUG);
-
-	if (rq->cmd_flags & REQ_SOFTBARRIER) {
-		/* barriers are scheduling boundary, update end_sector */
-		if (rq->cmd_type == REQ_TYPE_FS ||
-		    (rq->cmd_flags & REQ_DISCARD)) {
-			q->end_sector = rq_end_sector(rq);
-			q->boundary_rq = rq;
-		}
-	} else if (!(rq->cmd_flags & REQ_ELVPRIV) &&
-		    where == ELEVATOR_INSERT_SORT)
-		where = ELEVATOR_INSERT_BACK;
-
-	elv_insert(q, rq, where);
-}
 EXPORT_SYMBOL(__elv_add_request);
 
 void elv_add_request(struct request_queue *q, struct request *rq, int where)
diff --git a/block/genhd.c b/block/genhd.c
index c91a2dac6b6..2dd988723d7 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -739,7 +739,7 @@ void __init printk_all_partitions(void)
 
 		/*
 		 * Don't show empty devices or things that have been
-		 * surpressed
+		 * suppressed
 		 */
 		if (get_capacity(disk) == 0 ||
 		    (disk->flags & GENHD_FL_SUPPRESS_PARTITION_INFO))
@@ -1588,9 +1588,13 @@ static void disk_events_workfn(struct work_struct *work)
 
 	spin_unlock_irq(&ev->lock);
 
-	/* tell userland about new events */
+	/*
+	 * Tell userland about new events.  Only the events listed in
+	 * @disk->events are reported.  Unlisted events are processed the
+	 * same internally but never get reported to userland.
+	 */
 	for (i = 0; i < ARRAY_SIZE(disk_uevents); i++)
-		if (events & (1 << i))
+		if (events & disk->events & (1 << i))
 			envp[nr_events++] = disk_uevents[i];
 
 	if (nr_events)
diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c
index 2bc33214284..ffa0245e2ab 100644
--- a/crypto/ansi_cprng.c
+++ b/crypto/ansi_cprng.c
@@ -83,7 +83,7 @@ static void xor_vectors(unsigned char *in1, unsigned char *in2,
 }
 /*
  * Returns DEFAULT_BLK_SZ bytes of random data per call
- * returns 0 if generation succeded, <0 if something went wrong
+ * returns 0 if generation succeeded, <0 if something went wrong
  */
 static int _get_more_prng_bytes(struct prng_context *ctx, int cont_test)
 {
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 079ae8ca590..bc28337fded 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -94,7 +94,7 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
 		if (unlikely(!tx))
 			async_tx_quiesce(&submit->depend_tx);
 
-		/* spin wait for the preceeding transactions to complete */
+		/* spin wait for the preceding transactions to complete */
 		while (unlikely(!tx)) {
 			dma_async_issue_pending(chan);
 			tx = dma->device_prep_dma_xor(chan, dma_dest,
diff --git a/crypto/gf128mul.c b/crypto/gf128mul.c
index a90d260528d..df35e4ccd07 100644
--- a/crypto/gf128mul.c
+++ b/crypto/gf128mul.c
@@ -89,7 +89,7 @@
 }
 
 /*	Given the value i in 0..255 as the byte overflow when a field element
-    in GHASH is multipled by x^8, this function will return the values that
+    in GHASH is multiplied by x^8, this function will return the values that
     are generated in the lo 16-bit word of the field value by applying the
     modular polynomial. The values lo_byte and hi_byte are returned via the
     macro xp_fun(lo_byte, hi_byte) so that the values can be assembled into
diff --git a/crypto/vmac.c b/crypto/vmac.c
index 0999274a27a..f35ff8a3926 100644
--- a/crypto/vmac.c
+++ b/crypto/vmac.c
@@ -95,7 +95,7 @@ const u64 mpoly = UINT64_C(0x1fffffff1fffffff);  /* Poly key mask     */
 
 /*
  * For highest performance the L1 NH and L2 polynomial hashes should be
- * carefully implemented to take advantage of one's target architechture.
+ * carefully implemented to take advantage of one's target architecture.
  * Here these two hash functions are defined multiple time; once for
  * 64-bit architectures, once for 32-bit SSE2 architectures, and once
  * for the rest (32-bit) architectures.
diff --git a/crypto/xts.c b/crypto/xts.c
index 555ecaab1e5..851705446c8 100644
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -45,7 +45,7 @@ static int setkey(struct crypto_tfm *parent, const u8 *key,
 		return -EINVAL;
 	}
 
-	/* we need two cipher instances: one to compute the inital 'tweak'
+	/* we need two cipher instances: one to compute the initial 'tweak'
 	 * by encrypting the IV (usually the 'plain' iv) and the other
 	 * one to encrypt and decrypt the data */
 
diff --git a/drivers/Kconfig b/drivers/Kconfig
index aca70675146..61631edfecc 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -121,4 +121,7 @@ source "drivers/platform/Kconfig"
 source "drivers/clk/Kconfig"
 
 source "drivers/hwspinlock/Kconfig"
+
+source "drivers/clocksource/Kconfig"
+
 endmenu
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
index 66a03caa2ad..f739a70b1c7 100644
--- a/drivers/acpi/apei/Kconfig
+++ b/drivers/acpi/apei/Kconfig
@@ -1,5 +1,6 @@
 config ACPI_APEI
 	bool "ACPI Platform Error Interface (APEI)"
+	select MISC_FILESYSTEMS
 	select PSTORE
 	depends on X86
 	help
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index d6cb0ff6988..e6cef8e1b53 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -929,13 +929,17 @@ static int erst_check_table(struct acpi_table_erst *erst_tab)
 	return 0;
 }
 
-static size_t erst_reader(u64 *id, enum pstore_type_id *type,
+static int erst_open_pstore(struct pstore_info *psi);
+static int erst_close_pstore(struct pstore_info *psi);
+static ssize_t erst_reader(u64 *id, enum pstore_type_id *type,
 		       struct timespec *time);
 static u64 erst_writer(enum pstore_type_id type, size_t size);
 
 static struct pstore_info erst_info = {
 	.owner		= THIS_MODULE,
 	.name		= "erst",
+	.open		= erst_open_pstore,
+	.close		= erst_close_pstore,
 	.read		= erst_reader,
 	.write		= erst_writer,
 	.erase		= erst_clear
@@ -957,12 +961,32 @@ struct cper_pstore_record {
 	char data[];
 } __packed;
 
-static size_t erst_reader(u64 *id, enum pstore_type_id *type,
+static int reader_pos;
+
+static int erst_open_pstore(struct pstore_info *psi)
+{
+	int rc;
+
+	if (erst_disable)
+		return -ENODEV;
+
+	rc = erst_get_record_id_begin(&reader_pos);
+
+	return rc;
+}
+
+static int erst_close_pstore(struct pstore_info *psi)
+{
+	erst_get_record_id_end();
+
+	return 0;
+}
+
+static ssize_t erst_reader(u64 *id, enum pstore_type_id *type,
 		       struct timespec *time)
 {
 	int rc;
-	ssize_t len;
-	unsigned long flags;
+	ssize_t len = 0;
 	u64 record_id;
 	struct cper_pstore_record *rcd = (struct cper_pstore_record *)
 					(erst_info.buf - sizeof(*rcd));
@@ -970,24 +994,28 @@ static size_t erst_reader(u64 *id, enum pstore_type_id *type,
 	if (erst_disable)
 		return -ENODEV;
 
-	raw_spin_lock_irqsave(&erst_lock, flags);
 skip:
-	rc = __erst_get_next_record_id(&record_id);
-	if (rc) {
-		raw_spin_unlock_irqrestore(&erst_lock, flags);
-		return rc;
-	}
+	rc = erst_get_record_id_next(&reader_pos, &record_id);
+	if (rc)
+		goto out;
+
 	/* no more record */
 	if (record_id == APEI_ERST_INVALID_RECORD_ID) {
-		raw_spin_unlock_irqrestore(&erst_lock, flags);
-		return 0;
+		rc = -1;
+		goto out;
 	}
 
-	len = __erst_read(record_id, &rcd->hdr, sizeof(*rcd) +
-			  erst_erange.size);
+	len = erst_read(record_id, &rcd->hdr, sizeof(*rcd) +
+			erst_info.bufsize);
+	/* The record may be cleared by others, try read next record */
+	if (len == -ENOENT)
+		goto skip;
+	else if (len < 0) {
+		rc = -1;
+		goto out;
+	}
 	if (uuid_le_cmp(rcd->hdr.creator_id, CPER_CREATOR_PSTORE) != 0)
 		goto skip;
-	raw_spin_unlock_irqrestore(&erst_lock, flags);
 
 	*id = record_id;
 	if (uuid_le_cmp(rcd->sec_hdr.section_type,
@@ -1005,7 +1033,8 @@ skip:
 		time->tv_sec = 0;
 	time->tv_nsec = 0;
 
-	return len - sizeof(*rcd);
+out:
+	return (rc < 0) ? rc : (len - sizeof(*rcd));
 }
 
 static u64 erst_writer(enum pstore_type_id type, size_t size)
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index d1d484d4a06..f703b288115 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -241,7 +241,7 @@ static inline int ghes_severity(int severity)
 	case CPER_SEV_FATAL:
 		return GHES_SEV_PANIC;
 	default:
-		/* Unkown, go panic */
+		/* Unknown, go panic */
 		return GHES_SEV_PANIC;
 	}
 }
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 3a73a93596e..85b32376dad 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -49,10 +49,6 @@ ACPI_MODULE_NAME("processor_perflib");
 
 static DEFINE_MUTEX(performance_mutex);
 
-/* Use cpufreq debug layer for _PPC changes. */
-#define cpufreq_printk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
-						"cpufreq-core", msg)
-
 /*
  * _PPC support is implemented as a CPUfreq policy notifier:
  * This means each time a CPUfreq driver registered also with
@@ -145,7 +141,7 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 		return -ENODEV;
 	}
 
-	cpufreq_printk("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
+	pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
 		       (int)ppc, ppc ? "" : "not");
 
 	pr->performance_platform_limit = (int)ppc;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index fa84e974433..605a2954ef1 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -710,20 +710,14 @@ static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr)
 }
 
 #ifdef CONFIG_X86
-static int acpi_throttling_rdmsr(struct acpi_processor *pr,
-					u64 *value)
+static int acpi_throttling_rdmsr(u64 *value)
 {
-	struct cpuinfo_x86 *c;
 	u64 msr_high, msr_low;
-	unsigned int cpu;
 	u64 msr = 0;
 	int ret = -1;
 
-	cpu = pr->id;
-	c = &cpu_data(cpu);
-
-	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
-		!cpu_has(c, X86_FEATURE_ACPI)) {
+	if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) ||
+		!this_cpu_has(X86_FEATURE_ACPI)) {
 		printk(KERN_ERR PREFIX
 			"HARDWARE addr space,NOT supported yet\n");
 	} else {
@@ -738,18 +732,13 @@ static int acpi_throttling_rdmsr(struct acpi_processor *pr,
 	return ret;
 }
 
-static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
+static int acpi_throttling_wrmsr(u64 value)
 {
-	struct cpuinfo_x86 *c;
-	unsigned int cpu;
 	int ret = -1;
 	u64 msr;
 
-	cpu = pr->id;
-	c = &cpu_data(cpu);
-
-	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
-		!cpu_has(c, X86_FEATURE_ACPI)) {
+	if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) ||
+		!this_cpu_has(X86_FEATURE_ACPI)) {
 		printk(KERN_ERR PREFIX
 			"HARDWARE addr space,NOT supported yet\n");
 	} else {
@@ -761,15 +750,14 @@ static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
 	return ret;
 }
 #else
-static int acpi_throttling_rdmsr(struct acpi_processor *pr,
-				u64 *value)
+static int acpi_throttling_rdmsr(u64 *value)
 {
 	printk(KERN_ERR PREFIX
 		"HARDWARE addr space,NOT supported yet\n");
 	return -1;
 }
 
-static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
+static int acpi_throttling_wrmsr(u64 value)
 {
 	printk(KERN_ERR PREFIX
 		"HARDWARE addr space,NOT supported yet\n");
@@ -801,7 +789,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr,
 		ret = 0;
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		ret = acpi_throttling_rdmsr(pr, value);
+		ret = acpi_throttling_rdmsr(value);
 		break;
 	default:
 		printk(KERN_ERR PREFIX "Unknown addr space %d\n",
@@ -834,7 +822,7 @@ static int acpi_write_throttling_state(struct acpi_processor *pr,
 		ret = 0;
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		ret = acpi_throttling_wrmsr(pr, value);
+		ret = acpi_throttling_wrmsr(value);
 		break;
 	default:
 		printk(KERN_ERR PREFIX "Unknown addr space %d\n",
@@ -1164,7 +1152,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr,
 			 */
 			if (!match_pr->flags.throttling) {
 				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					"Throttling Controll is unsupported "
+					"Throttling Control is unsupported "
 					"on CPU %d\n", i));
 				continue;
 			}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index b136c9c1e53..449c556274c 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -943,6 +943,10 @@ static int acpi_bus_get_flags(struct acpi_device *device)
 	if (ACPI_SUCCESS(status))
 		device->flags.lockable = 1;
 
+	/* Power resources cannot be power manageable. */
+	if (device->device_type == ACPI_BUS_TYPE_POWER)
+		return 0;
+
 	/* Presence of _PS0|_PR0 indicates 'power manageable' */
 	status = acpi_get_handle(device->handle, "_PS0", &temp);
 	if (ACPI_FAILURE(status))
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 31e9e10f657..ec574fc8fbc 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1354,7 +1354,7 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video,
 		status = acpi_video_bus_get_one_device(dev, video);
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_WARNING PREFIX
-					"Cant attach device\n");
+					"Can't attach device\n");
 			continue;
 		}
 	}
@@ -1373,7 +1373,7 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
 					    acpi_video_device_notify);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_WARNING PREFIX
-		       "Cant remove video notify handler\n");
+		       "Can't remove video notify handler\n");
 	}
 	if (device->backlight) {
 		backlight_device_unregister(device->backlight);
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 6d2bb2524b6..7025593a58c 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -214,7 +214,7 @@ static int amba_pm_resume_noirq(struct device *dev)
 
 #endif /* !CONFIG_SUSPEND */
 
-#ifdef CONFIG_HIBERNATION
+#ifdef CONFIG_HIBERNATE_CALLBACKS
 
 static int amba_pm_freeze(struct device *dev)
 {
@@ -352,7 +352,7 @@ static int amba_pm_restore_noirq(struct device *dev)
 	return ret;
 }
 
-#else /* !CONFIG_HIBERNATION */
+#else /* !CONFIG_HIBERNATE_CALLBACKS */
 
 #define amba_pm_freeze		NULL
 #define amba_pm_thaw		NULL
@@ -363,7 +363,7 @@ static int amba_pm_restore_noirq(struct device *dev)
 #define amba_pm_poweroff_noirq	NULL
 #define amba_pm_restore_noirq	NULL
 
-#endif /* !CONFIG_HIBERNATION */
+#endif /* !CONFIG_HIBERNATE_CALLBACKS */
 
 #ifdef CONFIG_PM
 
@@ -760,7 +760,7 @@ int amba_request_regions(struct amba_device *dev, const char *name)
 }
 
 /**
- *	amba_release_regions - release mem regions assoicated with device
+ *	amba_release_regions - release mem regions associated with device
  *	@dev: amba_device structure for device
  *
  *	Release regions claimed by a successful call to amba_request_regions.
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 339c210f03a..ae22be4157b 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -417,7 +417,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
 
 	VPRINTK("ENTER\n");
 
-	WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+	WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS);
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e62f693be8e..71afe037131 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -150,7 +150,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP |
 				 AHCI_HFLAG_YES_NCQ),
-		.flags		= AHCI_FLAG_COMMON,
+		.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
@@ -261,6 +261,12 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e02), board_ahci }, /* Panther Point AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e04), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e05), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e06), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -926,7 +932,7 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
 		/*
 		 * Acer eMachines G725 has the same problem.  BIOS
 		 * V1.03 is known to be broken.  V3.04 is known to
-		 * work.  Inbetween, there are V1.06, V2.06 and V3.03
+		 * work.  Between, there are V1.06, V2.06 and V3.03
 		 * that we don't have much idea about.  For now,
 		 * blacklist anything older than V3.04.
 		 *
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index ccaf0812205..12c5282e7fc 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -225,10 +225,14 @@ enum {
 	/* em_ctl bits */
 	EM_CTL_RST		= (1 << 9), /* Reset */
 	EM_CTL_TM		= (1 << 8), /* Transmit Message */
-	EM_CTL_MR		= (1 << 0), /* Message Recieved */
+	EM_CTL_MR		= (1 << 0), /* Message Received */
 	EM_CTL_ALHD		= (1 << 26), /* Activity LED */
 	EM_CTL_XMT		= (1 << 25), /* Transmit Only */
 	EM_CTL_SMB		= (1 << 24), /* Single Message Buffer */
+	EM_CTL_SGPIO		= (1 << 19), /* SGPIO messages supported */
+	EM_CTL_SES		= (1 << 18), /* SES-2 messages supported */
+	EM_CTL_SAFTE		= (1 << 17), /* SAF-TE messages supported */
+	EM_CTL_LED		= (1 << 16), /* LED messages supported */
 
 	/* em message type */
 	EM_MSG_TYPE_LED		= (1 << 0), /* LED */
@@ -281,7 +285,7 @@ struct ahci_port_priv {
 };
 
 struct ahci_host_priv {
-	void __iomem *		mmio;		/* bus-independant mem map */
+	void __iomem *		mmio;		/* bus-independent mem map */
 	unsigned int		flags;		/* AHCI_HFLAG_* */
 	u32			cap;		/* cap to use */
 	u32			cap2;		/* cap2 to use */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index cdec4ab3b15..6f6e7718b05 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -38,16 +38,16 @@
  *  Hardware documentation available at http://developer.intel.com/
  *
  * Documentation
- *	Publically available from Intel web site. Errata documentation
- * is also publically available. As an aide to anyone hacking on this
+ *	Publicly available from Intel web site. Errata documentation
+ * is also publicly available. As an aide to anyone hacking on this
  * driver the list of errata that are relevant is below, going back to
  * PIIX4. Older device documentation is now a bit tricky to find.
  *
  * The chipsets all follow very much the same design. The original Triton
- * series chipsets do _not_ support independant device timings, but this
+ * series chipsets do _not_ support independent device timings, but this
  * is fixed in Triton II. With the odd mobile exception the chips then
  * change little except in gaining more modes until SATA arrives. This
- * driver supports only the chips with independant timing (that is those
+ * driver supports only the chips with independent timing (that is those
  * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix
  * for the early chip drivers.
  *
@@ -122,7 +122,7 @@ enum {
 	P2			= 2,  /* port 2 */
 	P3			= 3,  /* port 3 */
 	IDE			= -1, /* IDE */
-	NA			= -2, /* not avaliable */
+	NA			= -2, /* not available */
 	RV			= -3, /* reserved */
 
 	PIIX_AHCI_DEVICE	= 6,
@@ -309,6 +309,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (PBG) */
 	{ 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Panther Point) */
+	{ 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (Panther Point) */
+	{ 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (Panther Point) */
+	{ 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Panther Point) */
+	{ 0x8086, 0x1e09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	{ }	/* terminate list */
 };
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 26d452339e9..d38c40fe4dd 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -109,6 +109,8 @@ static ssize_t ahci_read_em_buffer(struct device *dev,
 static ssize_t ahci_store_em_buffer(struct device *dev,
 				    struct device_attribute *attr,
 				    const char *buf, size_t size);
+static ssize_t ahci_show_em_supported(struct device *dev,
+				      struct device_attribute *attr, char *buf);
 
 static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
 static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
@@ -116,6 +118,7 @@ static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
 static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
 static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
 		   ahci_read_em_buffer, ahci_store_em_buffer);
+static DEVICE_ATTR(em_message_supported, S_IRUGO, ahci_show_em_supported, NULL);
 
 struct device_attribute *ahci_shost_attrs[] = {
 	&dev_attr_link_power_management_policy,
@@ -126,6 +129,7 @@ struct device_attribute *ahci_shost_attrs[] = {
 	&dev_attr_ahci_host_version,
 	&dev_attr_ahci_port_cmd,
 	&dev_attr_em_buffer,
+	&dev_attr_em_message_supported,
 	NULL
 };
 EXPORT_SYMBOL_GPL(ahci_shost_attrs);
@@ -343,6 +347,24 @@ static ssize_t ahci_store_em_buffer(struct device *dev,
 	return size;
 }
 
+static ssize_t ahci_show_em_supported(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 em_ctl;
+
+	em_ctl = readl(mmio + HOST_EM_CTL);
+
+	return sprintf(buf, "%s%s%s%s\n",
+		       em_ctl & EM_CTL_LED ? "led " : "",
+		       em_ctl & EM_CTL_SAFTE ? "saf-te " : "",
+		       em_ctl & EM_CTL_SES ? "ses-2 " : "",
+		       em_ctl & EM_CTL_SGPIO ? "sgpio " : "");
+}
+
 /**
  *	ahci_save_initial_config - Save and fixup initial config values
  *	@dev: target AHCI device
@@ -1897,7 +1919,17 @@ static void ahci_pmp_attach(struct ata_port *ap)
 	ahci_enable_fbs(ap);
 
 	pp->intr_mask |= PORT_IRQ_BAD_PMP;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+	/*
+	 * We must not change the port interrupt mask register if the
+	 * port is marked frozen, the value in pp->intr_mask will be
+	 * restored later when the port is thawed.
+	 *
+	 * Note that during initialization, the port is marked as
+	 * frozen since the irq handler is not yet registered.
+	 */
+	if (!(ap->pflags & ATA_PFLAG_FROZEN))
+		writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
 }
 
 static void ahci_pmp_detach(struct ata_port *ap)
@@ -1913,7 +1945,10 @@ static void ahci_pmp_detach(struct ata_port *ap)
 	writel(cmd, port_mmio + PORT_CMD);
 
 	pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+	/* see comment above in ahci_pmp_attach() */
+	if (!(ap->pflags & ATA_PFLAG_FROZEN))
+		writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
 }
 
 int ahci_port_resume(struct ata_port *ap)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b91e19cab10..736bee5dafe 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3619,8 +3619,14 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 		scontrol |= (0x2 << 8);
 		break;
 	case ATA_LPM_MIN_POWER:
-		/* no restrictions on LPM transitions */
-		scontrol &= ~(0x3 << 8);
+		if (ata_link_nr_enabled(link) > 0)
+			/* no restrictions on LPM transitions */
+			scontrol &= ~(0x3 << 8);
+		else {
+			/* empty port, power off */
+			scontrol &= ~0xf;
+			scontrol |= (0x1 << 2);
+		}
 		break;
 	default:
 		WARN_ON(1);
@@ -4139,6 +4145,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	 */
 	{ "PIONEER DVD-RW  DVRTD08",	"1.00",	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-212D",	"1.28", ATA_HORKAGE_NOSETXFER },
+	{ "PIONEER DVD-RW  DVR-216D",	"1.08", ATA_HORKAGE_NOSETXFER },
 
 	/* End Marker */
 	{ }
@@ -5340,7 +5347,7 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
  *
  *	Resume @host.  Actual operation is performed by EH.  This
  *	function requests EH to perform PM operations and returns.
- *	Note that all resume operations are performed parallely.
+ *	Note that all resume operations are performed parallelly.
  *
  *	LOCKING:
  *	Kernel thread context (may sleep).
@@ -5480,7 +5487,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 	if (!ap)
 		return NULL;
 
-	ap->pflags |= ATA_PFLAG_INITIALIZING;
+	ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN;
 	ap->lock = &host->lock;
 	ap->print_id = -1;
 	ap->host = host;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index df3f3140c9c..dfb6e9d3d75 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -771,7 +771,7 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
 		/* process port suspend request */
 		ata_eh_handle_port_suspend(ap);
 
-		/* Exception might have happend after ->error_handler
+		/* Exception might have happened after ->error_handler
 		 * recovered the port but before this point.  Repeat
 		 * EH in such case.
 		 */
@@ -1742,7 +1742,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
  *
  *	Analyze taskfile of @qc and further determine cause of
  *	failure.  This function also requests ATAPI sense data if
- *	avaliable.
+ *	available.
  *
  *	LOCKING:
  *	Kernel thread context (may sleep).
@@ -1893,7 +1893,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
  *	   occurred during last 5 mins, NCQ_OFF.
  *
  *	3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors
- *	   ocurred during last 5 mins, FALLBACK_TO_PIO
+ *	   occurred during last 5 mins, FALLBACK_TO_PIO
  *
  *	4. If more than 3 TOUT_HSM or UNK_DEV errors occurred
  *	   during last 10 mins, NCQ_OFF.
@@ -2577,7 +2577,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	if (link->flags & ATA_LFLAG_NO_SRST)
 		softreset = NULL;
 
-	/* make sure each reset attemp is at least COOL_DOWN apart */
+	/* make sure each reset attempt is at least COOL_DOWN apart */
 	if (ehc->i.flags & ATA_EHI_DID_RESET) {
 		now = jiffies;
 		WARN_ON(time_after(ehc->last_reset, now));
@@ -2736,7 +2736,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			if (!reset) {
 				ata_link_printk(link, KERN_ERR,
 						"follow-up softreset required "
-						"but no softreset avaliable\n");
+						"but no softreset available\n");
 				failed_link = link;
 				rc = -EINVAL;
 				goto fail;
@@ -3316,6 +3316,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	struct ata_eh_context *ehc = &link->eh_context;
 	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
 	enum ata_lpm_policy old_policy = link->lpm_policy;
+	bool no_dipm = link->ap->flags & ATA_FLAG_NO_DIPM;
 	unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
 	unsigned int err_mask;
 	int rc;
@@ -3332,7 +3333,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	 */
 	ata_for_each_dev(dev, link, ENABLED) {
 		bool hipm = ata_id_has_hipm(dev->id);
-		bool dipm = ata_id_has_dipm(dev->id);
+		bool dipm = ata_id_has_dipm(dev->id) && !no_dipm;
 
 		/* find the first enabled and LPM enabled devices */
 		if (!link_dev)
@@ -3389,7 +3390,8 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 
 	/* host config updated, enable DIPM if transitioning to MIN_POWER */
 	ata_for_each_dev(dev, link, ENABLED) {
-		if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
+		if (policy == ATA_LPM_MIN_POWER && !no_dipm &&
+		    ata_id_has_dipm(dev->id)) {
 			err_mask = ata_dev_set_feature(dev,
 					SETFEATURES_SATA_ENABLE, SATA_DIPM);
 			if (err_mask && err_mask != AC_ERR_DEV) {
@@ -3421,7 +3423,7 @@ fail:
 	return rc;
 }
 
-static int ata_link_nr_enabled(struct ata_link *link)
+int ata_link_nr_enabled(struct ata_link *link)
 {
 	struct ata_device *dev;
 	int cnt = 0;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 3120596d4af..f06b7ea590d 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -449,6 +449,16 @@ static void sata_pmp_quirks(struct ata_port *ap)
 		 * otherwise.  Don't try hard to recover it.
 		 */
 		ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
+	} else if (vendor == 0x197b && devid == 0x2352) {
+		/* chip found in Thermaltake BlackX Duet, jmicron JMB350? */
+		ata_for_each_link(link, ap, EDGE) {
+			/* SRST breaks detection and disks get misclassified
+			 * LPM disabled to avoid potential problems
+			 */
+			link->flags |= ATA_LFLAG_NO_LPM |
+				       ATA_LFLAG_NO_SRST |
+				       ATA_LFLAG_ASSUME_ATA;
+		}
 	}
 }
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a8341999135..30ea95f43e7 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -999,7 +999,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
  *	@qc: Command that we are erroring out
  *
  *	Generate sense block for a failed ATA command @qc.  Descriptor
- *	format is used to accomodate LBA48 block address.
+ *	format is used to accommodate LBA48 block address.
  *
  *	LOCKING:
  *	None.
@@ -2138,7 +2138,7 @@ static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
 	 * with the unmap bit set.
 	 */
 	if (ata_id_has_trim(args->id)) {
-		put_unaligned_be32(65535 * 512 / 8, &rbuf[20]);
+		put_unaligned_be64(65535 * 512 / 8, &rbuf[36]);
 		put_unaligned_be32(1, &rbuf[28]);
 	}
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index cf7acbc0cfc..b1b926c55a7 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2447,13 +2447,18 @@ int ata_pci_sff_activate_host(struct ata_host *host,
 		return -ENOMEM;
 
 	if (!legacy_mode && pdev->irq) {
+		int i;
+
 		rc = devm_request_irq(dev, pdev->irq, irq_handler,
 				      IRQF_SHARED, drv_name, host);
 		if (rc)
 			goto out;
 
-		ata_port_desc(host->ports[0], "irq %d", pdev->irq);
-		ata_port_desc(host->ports[1], "irq %d", pdev->irq);
+		for (i = 0; i < 2; i++) {
+			if (ata_port_is_dummy(host->ports[i]))
+				continue;
+			ata_port_desc(host->ports[i], "irq %d", pdev->irq);
+		}
 	} else if (legacy_mode) {
 		if (!ata_port_is_dummy(host->ports[0])) {
 			rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
@@ -2839,7 +2844,7 @@ unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
 		bmdma_stopped = true;
 
 		if (unlikely(host_stat & ATA_DMA_ERR)) {
-			/* error when transfering data to/from memory */
+			/* error when transferring data to/from memory */
 			qc->err_mask |= AC_ERR_HOST_BUS;
 			ap->hsm_task_state = HSM_ST_ERR;
 		}
@@ -3032,7 +3037,7 @@ void ata_bmdma_start(struct ata_queued_cmd *qc)
 	 * Or maybe I'm just being paranoid.
 	 *
 	 * FIXME: The posting of this write means I/O starts are
-	 * unneccessarily delayed for MMIO
+	 * unnecessarily delayed for MMIO
 	 */
 }
 EXPORT_SYMBOL_GPL(ata_bmdma_start);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 620a07cabe3..b0975a5ad8c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -11,7 +11,7 @@
  *	Power management on ports
  *
  *
- *  Documentation publically available.
+ *  Documentation publicly available.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 65cee74605b..719bb73a73e 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -385,7 +385,7 @@ static inline int wait4buf(struct arasan_cf_dev *acdev)
 		return -ETIMEDOUT;
 	}
 
-	/* Check if PIO Error interrupt has occured */
+	/* Check if PIO Error interrupt has occurred */
 	if (acdev->dma_status & ATA_DMA_ERR)
 		return -EAGAIN;
 
@@ -450,7 +450,7 @@ static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg)
 	/*
 	 * For each sg:
 	 * MAX_XFER_COUNT data will be transferred before we get transfer
-	 * complete interrupt. Inbetween after FIFO_SIZE data
+	 * complete interrupt. Between after FIFO_SIZE data
 	 * buffer available interrupt will be generated. At this time we will
 	 * fill FIFO again: max FIFO_SIZE data.
 	 */
@@ -463,7 +463,7 @@ static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg)
 				acdev->vbase + XFER_CTR);
 		spin_unlock_irqrestore(&acdev->host->lock, flags);
 
-		/* continue dma xfers untill current sg is completed */
+		/* continue dma xfers until current sg is completed */
 		while (xfer_cnt) {
 			/* wait for read to complete */
 			if (!write) {
@@ -563,7 +563,7 @@ static void data_xfer(struct work_struct *work)
 
 chan_request_fail:
 	spin_lock_irqsave(&acdev->host->lock, flags);
-	/* error when transfering data to/from memory */
+	/* error when transferring data to/from memory */
 	qc->err_mask |= AC_ERR_HOST_BUS;
 	qc->ap->hsm_task_state = HSM_ST_ERR;
 
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 0da0dcc7dd0..960c7257139 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -3,6 +3,7 @@
  * with CompactFlash interface in True IDE mode
  *
  * Copyright (C) 2009 Matyukevich Sergey
+ *               2011 Igor Plyatov
  *
  * Based on:
  *      * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
@@ -31,26 +32,149 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 
+#define DRV_NAME		"pata_at91"
+#define DRV_VERSION		"0.3"
 
-#define DRV_NAME "pata_at91"
-#define DRV_VERSION "0.1"
-
-#define CF_IDE_OFFSET	    0x00c00000
-#define CF_ALT_IDE_OFFSET   0x00e00000
-#define CF_IDE_RES_SIZE     0x08
+#define CF_IDE_OFFSET		0x00c00000
+#define CF_ALT_IDE_OFFSET	0x00e00000
+#define CF_IDE_RES_SIZE		0x08
+#define CS_PULSE_MAXIMUM	319
+#define ER_SMC_CALC		1
+#define ER_SMC_RECALC		2
 
 struct at91_ide_info {
 	unsigned long mode;
 	unsigned int cs;
-
 	struct clk *mck;
-
 	void __iomem *ide_addr;
 	void __iomem *alt_addr;
 };
 
-static const struct ata_timing initial_timing =
-	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
+/**
+ * struct smc_range - range of valid values for SMC register.
+ */
+struct smc_range {
+	int min;
+	int max;
+};
+
+/**
+ * adjust_smc_value - adjust value for one of SMC registers.
+ * @value: adjusted value
+ * @range: array of SMC ranges with valid values
+ * @size: SMC ranges array size
+ *
+ * This returns the difference between input and output value or negative
+ * in case of invalid input value.
+ * If negative returned, then output value = maximal possible from ranges.
+ */
+static int adjust_smc_value(int *value, struct smc_range *range, int size)
+{
+	int maximum = (range + size - 1)->max;
+	int remainder;
+
+	do {
+		if (*value < range->min) {
+			remainder = range->min - *value;
+			*value = range->min; /* nearest valid value */
+			return remainder;
+		} else if ((range->min <= *value) && (*value <= range->max))
+			return 0;
+
+		range++;
+	} while (--size);
+	*value = maximum;
+
+	return -1; /* invalid value */
+}
+
+/**
+ * calc_smc_vals - calculate SMC register values
+ * @dev: ATA device
+ * @setup: SMC_SETUP register value
+ * @pulse: SMC_PULSE register value
+ * @cycle: SMC_CYCLE register value
+ *
+ * This returns negative in case of invalid values for SMC registers:
+ * -ER_SMC_RECALC - recalculation required for SMC values,
+ * -ER_SMC_CALC - calculation failed (invalid input values).
+ *
+ * SMC use special coding scheme, see "Coding and Range of Timing
+ * Parameters" table from AT91SAM9 datasheets.
+ *
+ *	SMC_SETUP = 128*setup[5] + setup[4:0]
+ *	SMC_PULSE = 256*pulse[6] + pulse[5:0]
+ *	SMC_CYCLE = 256*cycle[8:7] + cycle[6:0]
+ */
+static int calc_smc_vals(struct device *dev,
+		int *setup, int *pulse, int *cycle, int *cs_pulse)
+{
+	int ret_val;
+	int err = 0;
+	struct smc_range range_setup[] = {	/* SMC_SETUP valid values */
+		{.min = 0,	.max = 31},	/* first  range */
+		{.min = 128,	.max = 159}	/* second range */
+	};
+	struct smc_range range_pulse[] = {	/* SMC_PULSE valid values */
+		{.min = 0,	.max = 63},	/* first  range */
+		{.min = 256,	.max = 319}	/* second range */
+	};
+	struct smc_range range_cycle[] = {	/* SMC_CYCLE valid values */
+		{.min = 0,	.max = 127},	/* first  range */
+		{.min = 256,	.max = 383},	/* second range */
+		{.min = 512,	.max = 639},	/* third  range */
+		{.min = 768,	.max = 895}	/* fourth range */
+	};
+
+	ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup));
+	if (ret_val < 0)
+		dev_warn(dev, "maximal SMC Setup value\n");
+	else
+		*cycle += ret_val;
+
+	ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse));
+	if (ret_val < 0)
+		dev_warn(dev, "maximal SMC Pulse value\n");
+	else
+		*cycle += ret_val;
+
+	ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle));
+	if (ret_val < 0)
+		dev_warn(dev, "maximal SMC Cycle value\n");
+
+	*cs_pulse = *cycle;
+	if (*cs_pulse > CS_PULSE_MAXIMUM) {
+		dev_err(dev, "unable to calculate valid SMC settings\n");
+		return -ER_SMC_CALC;
+	}
+
+	ret_val = adjust_smc_value(cs_pulse, range_pulse,
+					ARRAY_SIZE(range_pulse));
+	if (ret_val < 0) {
+		dev_warn(dev, "maximal SMC CS Pulse value\n");
+	} else if (ret_val != 0) {
+		*cycle = *cs_pulse;
+		dev_warn(dev, "SMC Cycle extended\n");
+		err = -ER_SMC_RECALC;
+	}
+
+	return err;
+}
+
+/**
+ * to_smc_format - convert values into SMC format
+ * @setup: SETUP value of SMC Setup Register
+ * @pulse: PULSE value of SMC Pulse Register
+ * @cycle: CYCLE value of SMC Cycle Register
+ * @cs_pulse: NCS_PULSE value of SMC Pulse Register
+ */
+static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse)
+{
+	*setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2);
+	*pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2);
+	*cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1);
+	*cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2);
+}
 
 static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 {
@@ -69,80 +193,77 @@ static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 	return (ns * mul + 65536) >> 16;    /* rounding */
 }
 
-static void set_smc_mode(struct at91_ide_info *info)
-{
-	at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
-	return;
-}
-
-static void set_smc_timing(struct device *dev,
+/**
+ * set_smc_timing - SMC timings setup.
+ * @dev: device
+ * @info: AT91 IDE info
+ * @ata: ATA timings
+ *
+ * Its assumed that write timings are same as read timings,
+ * cs_setup = 0 and cs_pulse = cycle.
+ */
+static void set_smc_timing(struct device *dev, struct ata_device *adev,
 		struct at91_ide_info *info, const struct ata_timing *ata)
 {
-	unsigned long read_cycle, write_cycle, active, recover;
-	unsigned long nrd_setup, nrd_pulse, nrd_recover;
-	unsigned long nwe_setup, nwe_pulse;
-
-	unsigned long ncs_write_setup, ncs_write_pulse;
-	unsigned long ncs_read_setup, ncs_read_pulse;
-
-	unsigned long mck_hz;
-
-	read_cycle  = ata->cyc8b;
-	nrd_setup   = ata->setup;
-	nrd_pulse   = ata->act8b;
-	nrd_recover = ata->rec8b;
-
+	int ret = 0;
+	int use_iordy;
+	unsigned int t6z;         /* data tristate time in ns */
+	unsigned int cycle;       /* SMC Cycle width in MCK ticks */
+	unsigned int setup;       /* SMC Setup width in MCK ticks */
+	unsigned int pulse;       /* CFIOR and CFIOW pulse width in MCK ticks */
+	unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
+	unsigned int cs_pulse;    /* CS4 or CS5 pulse width in MCK ticks*/
+	unsigned int tdf_cycles;  /* SMC TDF MCK ticks */
+	unsigned long mck_hz;     /* MCK frequency in Hz */
+
+	t6z = (ata->mode < XFER_PIO_5) ? 30 : 20;
 	mck_hz = clk_get_rate(info->mck);
+	cycle = calc_mck_cycles(ata->cyc8b, mck_hz);
+	setup = calc_mck_cycles(ata->setup, mck_hz);
+	pulse = calc_mck_cycles(ata->act8b, mck_hz);
+	tdf_cycles = calc_mck_cycles(t6z, mck_hz);
+
+	do {
+		ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse);
+	} while (ret == -ER_SMC_RECALC);
+
+	if (ret == -ER_SMC_CALC)
+		dev_err(dev, "Interface may not operate correctly\n");
+
+	dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n",
+		setup, pulse, cycle, cs_pulse);
+	to_smc_format(&setup, &pulse, &cycle, &cs_pulse);
+	/* disable or enable waiting for IORDY signal */
+	use_iordy = ata_pio_need_iordy(adev);
+	if (use_iordy)
+		info->mode |= AT91_SMC_EXNWMODE_READY;
+
+	if (tdf_cycles > 15) {
+		tdf_cycles = 15;
+		dev_warn(dev, "maximal SMC TDF Cycles value\n");
+	}
 
-	read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
-	nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
-	nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
-	nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
-
-	active  = nrd_setup + nrd_pulse;
-	recover = read_cycle - active;
-
-	/* Need at least two cycles recovery */
-	if (recover < 2)
-		read_cycle = active + 2;
-
-	/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
-	ncs_read_setup = 1;
-	ncs_read_pulse = read_cycle - 2;
-
-	/* Write timings same as read timings */
-	write_cycle = read_cycle;
-	nwe_setup = nrd_setup;
-	nwe_pulse = nrd_pulse;
-	ncs_write_setup = ncs_read_setup;
-	ncs_write_pulse = ncs_read_pulse;
-
-	dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
-			nrd_setup, nrd_pulse, read_cycle);
-	dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
-			nwe_setup, nwe_pulse, write_cycle);
-	dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
-			ncs_read_setup, ncs_read_pulse);
-	dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
-			ncs_write_setup, ncs_write_pulse);
+	dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
+	info->mode |= AT91_SMC_TDF_(tdf_cycles);
 
+	/* write SMC Setup Register */
 	at91_sys_write(AT91_SMC_SETUP(info->cs),
-			AT91_SMC_NWESETUP_(nwe_setup) |
-			AT91_SMC_NRDSETUP_(nrd_setup) |
-			AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
-			AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
-
+			AT91_SMC_NWESETUP_(setup) |
+			AT91_SMC_NRDSETUP_(setup) |
+			AT91_SMC_NCS_WRSETUP_(cs_setup) |
+			AT91_SMC_NCS_RDSETUP_(cs_setup));
+	/* write SMC Pulse Register */
 	at91_sys_write(AT91_SMC_PULSE(info->cs),
-			AT91_SMC_NWEPULSE_(nwe_pulse) |
-			AT91_SMC_NRDPULSE_(nrd_pulse) |
-			AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
-			AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
-
+			AT91_SMC_NWEPULSE_(pulse) |
+			AT91_SMC_NRDPULSE_(pulse) |
+			AT91_SMC_NCS_WRPULSE_(cs_pulse) |
+			AT91_SMC_NCS_RDPULSE_(cs_pulse));
+	/* write SMC Cycle Register */
 	at91_sys_write(AT91_SMC_CYCLE(info->cs),
-			AT91_SMC_NWECYCLE_(write_cycle) |
-			AT91_SMC_NRDCYCLE_(read_cycle));
-
-	return;
+			AT91_SMC_NWECYCLE_(cycle) |
+			AT91_SMC_NRDCYCLE_(cycle));
+	/* write SMC Mode Register*/
+	at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
 }
 
 static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -156,15 +277,9 @@ static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	if (ret) {
 		dev_warn(ap->dev, "Failed to compute ATA timing %d, "
 			 "set PIO_0 timing\n", ret);
-		set_smc_timing(ap->dev, info, &initial_timing);
-	} else {
-		set_smc_timing(ap->dev, info, &timing);
+		timing = *ata_timing_find_mode(XFER_PIO_0);
 	}
-
-	/* Setup SMC mode */
-	set_smc_mode(info);
-
-	return;
+	set_smc_timing(ap->dev, adev, info, &timing);
 }
 
 static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
@@ -330,7 +445,7 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
 static struct platform_driver pata_at91_driver = {
 	.probe		= pata_at91_probe,
 	.remove		= __devexit_p(pata_at91_remove),
-	.driver 	= {
+	.driver		= {
 		.name		= DRV_NAME,
 		.owner		= THIS_MODULE,
 	},
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index e0b58b8dfe6..ea64967000f 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1342,7 +1342,7 @@ static unsigned int bfin_ata_host_intr(struct ata_port *ap,
 			ap->ops->bmdma_stop(qc);
 
 			if (unlikely(host_stat & ATA_DMA_ERR)) {
-				/* error when transfering data to/from memory */
+				/* error when transferring data to/from memory */
 				qc->err_mask |= AC_ERR_HOST_BUS;
 				ap->hsm_task_state = HSM_ST_ERR;
 			}
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 905ff76d3cb..7bafc16cf5e 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -41,6 +41,9 @@
 enum {
 	CFR 		= 0x50,
 		CFR_INTR_CH0  = 0x04,
+	CNTRL		= 0x51,
+		CNTRL_CH0     = 0x04,
+		CNTRL_CH1     = 0x08,
 	CMDTIM 		= 0x52,
 	ARTTIM0 	= 0x53,
 	DRWTIM0 	= 0x54,
@@ -328,9 +331,19 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &cmd648_port_ops
 		}
 	};
-	const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
-	u8 mrdmode;
+	const struct ata_port_info *ppi[] = { 
+		&cmd_info[id->driver_data],
+		&cmd_info[id->driver_data],
+		NULL
+	};
+	u8 mrdmode, reg;
 	int rc;
+	struct pci_dev *bridge = pdev->bus->self;
+	/* mobility split bridges don't report enabled ports correctly */
+	int port_ok = !(bridge && bridge->vendor ==
+			PCI_VENDOR_ID_MOBILITY_ELECTRONICS);
+	/* all (with exceptions below) apart from 643 have CNTRL_CH0 bit */
+	int cntrl_ch0_ok = (id->driver_data != 0);
 
 	rc = pcim_enable_device(pdev);
 	if (rc)
@@ -341,11 +354,18 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	if (pdev->device == PCI_DEVICE_ID_CMD_646) {
 		/* Does UDMA work ? */
-		if (pdev->revision > 4)
+		if (pdev->revision > 4) {
 			ppi[0] = &cmd_info[2];
+			ppi[1] = &cmd_info[2];
+		}
 		/* Early rev with other problems ? */
-		else if (pdev->revision == 1)
+		else if (pdev->revision == 1) {
 			ppi[0] = &cmd_info[3];
+			ppi[1] = &cmd_info[3];
+		}
+		/* revs 1,2 have no CNTRL_CH0 */
+		if (pdev->revision < 3)
+			cntrl_ch0_ok = 0;
 	}
 
 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
@@ -354,6 +374,20 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	mrdmode |= 0x02;	/* Memory read line enable */
 	pci_write_config_byte(pdev, MRDMODE, mrdmode);
 
+	/* check for enabled ports */
+	pci_read_config_byte(pdev, CNTRL, &reg);
+	if (!port_ok)
+		dev_printk(KERN_NOTICE, &pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
+	if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
+		dev_printk(KERN_NOTICE, &pdev->dev, "Primary port is disabled\n");
+		ppi[0] = &ata_dummy_port_info;
+		
+	}
+	if (port_ok && !(reg & CNTRL_CH1)) {
+		dev_printk(KERN_NOTICE, &pdev->dev, "Secondary port is disabled\n");
+		ppi[1] = &ata_dummy_port_info;
+	}
+
 	/* Force PIO 0 here.. */
 
 	/* PPC specific fixup copied from old driver */
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 030952f1f97..e3254fcff0f 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -29,7 +29,7 @@
  * General Public License for more details.
  *
  * Documentation:
- *	Not publically available.
+ *	Not publicly available.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index b21f0021f54..d8d9c580774 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -15,7 +15,7 @@
  * with PCI IDE and also that we do not disable the device when our driver is
  * unloaded (as it has many other functions).
  *
- * The driver conciously keeps this logic internally to avoid pushing quirky
+ * The driver consciously keeps this logic internally to avoid pushing quirky
  * PATA history into the clean libata layer.
  *
  * Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
index a2a73d95384..b86d7e22595 100644
--- a/drivers/ata/pata_palmld.c
+++ b/drivers/ata/pata_palmld.c
@@ -33,6 +33,11 @@
 
 #define DRV_NAME "pata_palmld"
 
+static struct gpio palmld_hdd_gpios[] = {
+	{ GPIO_NR_PALMLD_IDE_PWEN,	GPIOF_INIT_HIGH,	"HDD Power" },
+	{ GPIO_NR_PALMLD_IDE_RESET,	GPIOF_INIT_LOW,		"HDD Reset" },
+};
+
 static struct scsi_host_template palmld_sht = {
 	ATA_PIO_SHT(DRV_NAME),
 };
@@ -52,28 +57,23 @@ static __devinit int palmld_pata_probe(struct platform_device *pdev)
 
 	/* allocate host */
 	host = ata_host_alloc(&pdev->dev, 1);
-	if (!host)
-		return -ENOMEM;
+	if (!host) {
+		ret = -ENOMEM;
+		goto err1;
+	}
 
 	/* remap drive's physical memory address */
 	mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
-	if (!mem)
-		return -ENOMEM;
+	if (!mem) {
+		ret = -ENOMEM;
+		goto err1;
+	}
 
 	/* request and activate power GPIO, IRQ GPIO */
-	ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+	ret = gpio_request_array(palmld_hdd_gpios,
+				ARRAY_SIZE(palmld_hdd_gpios));
 	if (ret)
 		goto err1;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
-	if (ret)
-		goto err3;
 
 	/* reset the drive */
 	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
@@ -96,13 +96,15 @@ static __devinit int palmld_pata_probe(struct platform_device *pdev)
 	ata_sff_std_ports(&ap->ioaddr);
 
 	/* activate host */
-	return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+	ret = ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
 					&palmld_sht);
+	if (ret)
+		goto err2;
+
+	return ret;
 
-err3:
-	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
 err2:
-	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+	gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios));
 err1:
 	return ret;
 }
@@ -116,8 +118,7 @@ static __devexit int palmld_pata_remove(struct platform_device *dev)
 	/* power down the HDD */
 	gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
 
-	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
-	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+	gpio_free_array(palmld_hdd_gpios, ARRAY_SIZE(palmld_hdd_gpios));
 
 	return 0;
 }
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 4a454a88aa9..4d04471794b 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -112,7 +112,7 @@ static int rz1000_reinit_one(struct pci_dev *pdev)
 	if (rc)
 		return rc;
 
-	/* If this fails on resume (which is a "cant happen" case), we
+	/* If this fails on resume (which is a "can't happen" case), we
 	   must stop as any progress risks data loss */
 	if (rz1000_fifo_disable(pdev))
 		panic("rz1000 fifo");
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 00eefbd84b3..118787caa93 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -11,7 +11,7 @@
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *
- *  Documentation publically available.
+ *  Documentation publicly available.
  *
  *	If you have strange problems with nVidia chipset systems please
  *	see the SI support documentation and update your system BIOS
@@ -43,7 +43,7 @@
  *
  *	Turn a config register offset into the right address in either
  *	PCI space or MMIO space to access the control register in question
- *	Thankfully this is a configuration operation so isnt performance
+ *	Thankfully this is a configuration operation so isn't performance
  *	criticial.
  */
 
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index c04abc393fc..be08ff92db1 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -331,7 +331,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
-		   the higher bits are dependant on the device */
+		   the higher bits are dependent on the device */
 		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
 	} else {
@@ -371,7 +371,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
-		   the higher bits are dependant on the device, bit 15 udma */
+		   the higher bits are dependent on the device, bit 15 udma */
 		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
 	} else {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 0d1f89e571d..b3e0c943228 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -30,7 +30,7 @@
  * Loosely based on the piix & svwks drivers.
  *
  * Documentation:
- *	Not publically available.
+ *	Not publicly available.
  */
 
 #include <linux/kernel.h>
@@ -210,13 +210,34 @@ static const struct pci_device_id triflex[] = {
 	{ },
 };
 
+#ifdef CONFIG_PM
+static int triflex_ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc = 0;
+
+	rc = ata_host_suspend(host, mesg);
+	if (rc)
+		return rc;
+
+	/*
+	 * We must not disable or powerdown the device.
+	 * APM bios refuses to suspend if IDE is not accessible.
+	 */
+	pci_save_state(pdev);
+
+	return 0;
+}
+
+#endif
+
 static struct pci_driver triflex_pci_driver = {
 	.name 		= DRV_NAME,
 	.id_table	= triflex,
 	.probe 		= triflex_init_one,
 	.remove		= ata_pci_remove_one,
 #ifdef CONFIG_PM
-	.suspend	= ata_pci_device_suspend,
+	.suspend	= triflex_ata_pci_device_suspend,
 	.resume		= ata_pci_device_resume,
 #endif
 };
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 0f91e583892..35a71d875d0 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -42,7 +42,7 @@ enum {
 
 	/*
 	 * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
-	 * chained indirect PRDEs upto a max count of 63.
+	 * chained indirect PRDEs up to a max count of 63.
 	 * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will
 	 * be setup as an indirect descriptor, pointing to it's next
 	 * (contiguous) PRDE. Though chained indirect PRDE arrays are
@@ -907,7 +907,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
 	ata_msleep(ap, 1);
 
 	/*
-	 * SATA device enters reset state after receving a Control register
+	 * SATA device enters reset state after receiving a Control register
 	 * FIS with SRST bit asserted and it awaits another H2D Control reg.
 	 * FIS with SRST bit cleared, then the device does internal diags &
 	 * initialization, followed by indicating it's initialization status
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index cd40651e9b7..b52c0519ad0 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1352,7 +1352,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
 			/*
 			 * Workaround for 88SX60x1 FEr SATA#26:
 			 *
-			 * COMRESETs have to take care not to accidently
+			 * COMRESETs have to take care not to accidentally
 			 * put the drive to sleep when writing SCR_CONTROL.
 			 * Setting bits 12..15 prevents this problem.
 			 *
@@ -2044,7 +2044,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 
 	cw = &pp->crqb[in_index].ata_cmd[0];
 
-	/* Sadly, the CRQB cannot accomodate all registers--there are
+	/* Sadly, the CRQB cannot accommodate all registers--there are
 	 * only 11 bytes...so we must pick and choose required
 	 * registers based on the command.  So, we drop feature and
 	 * hob_feature for [RW] DMA commands, but they are needed for
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 42344e3c686..f173ef3bfc1 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2121,7 +2121,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 
 	host_stat = ap->ops->bmdma_status(ap);
 	if (unlikely(host_stat & ATA_DMA_ERR)) {
-		/* error when transfering data to/from memory */
+		/* error when transferring data to/from memory */
 		ata_ehi_clear_desc(ehi);
 		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
 		ehi->err_mask |= AC_ERR_HOST_BUS;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 21242c5709a..54434db15b1 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -582,7 +582,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
 	 * When host issues HOLD, device may send up to 20DW of data
 	 * before acknowledging it with HOLDA and the host should be
 	 * able to buffer them in FIFO.  Unfortunately, some WD drives
-	 * send upto 40DW before acknowledging HOLD and, in the
+	 * send up to 40DW before acknowledging HOLD and, in the
 	 * default configuration, this ends up overflowing vt6421's
 	 * FIFO, making the controller abort the transaction with
 	 * R_ERR.
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index 9f47e862526..a5fcb1eb862 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -497,7 +497,7 @@ static void rx_complete (amb_dev * dev, rx_out * rx) {
 	  // VC layer stats
 	  atomic_inc(&atm_vcc->stats->rx);
 	  __net_timestamp(skb);
-	  // end of our responsability
+	  // end of our responsibility
 	  atm_vcc->push (atm_vcc, skb);
 	  return;
 	  
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index c495fae7420..3230ea0df83 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1469,10 +1469,7 @@ if (eni_boards) printk(KERN_INFO "loss: %ld\n",ENI_DEV(eni_boards)->lost);
 
 static void bug_int(struct atm_dev *dev,unsigned long reason)
 {
-	struct eni_dev *eni_dev;
-
 	DPRINTK(">bug_int\n");
-	eni_dev = ENI_DEV(dev);
 	if (reason & MID_DMA_ERR_ACK)
 		printk(KERN_CRIT DEV_LABEL "(itf %d): driver error - DMA "
 		    "error\n",dev->number);
@@ -1900,7 +1897,6 @@ static void eni_close(struct atm_vcc *vcc)
 
 static int eni_open(struct atm_vcc *vcc)
 {
-	struct eni_dev *eni_dev;
 	struct eni_vcc *eni_vcc;
 	int error;
 	short vpi = vcc->vpi;
@@ -1910,7 +1906,6 @@ static int eni_open(struct atm_vcc *vcc)
 	EVENT("eni_open\n",0,0);
 	if (!test_bit(ATM_VF_PARTIAL,&vcc->flags))
 		vcc->dev_data = NULL;
-	eni_dev = ENI_DEV(vcc->dev);
 	if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC)
 		set_bit(ATM_VF_ADDR,&vcc->flags);
 	if (vcc->qos.aal != ATM_AAL0 && vcc->qos.aal != ATM_AAL5)
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 049650d42c8..ef7a658312a 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1782,7 +1782,7 @@ static int __devinit fs_init (struct fs_dev *dev)
 		write_fs (dev, RAS0, RAS0_DCD_XHLT 
 			  | (((1 << FS155_VPI_BITS) - 1) * RAS0_VPSEL)
 			  | (((1 << FS155_VCI_BITS) - 1) * RAS0_VCSEL));
-		/* We can chose the split arbitarily. We might be able to 
+		/* We can chose the split arbitrarily. We might be able to 
 		   support more. Whatever. This should do for now. */
 		dev->atm_dev->ci_range.vpi_bits = FS155_VPI_BITS;
 		dev->atm_dev->ci_range.vci_bits = FS155_VCI_BITS;
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index bdd2719f3f6..bc9e702186d 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2643,16 +2643,19 @@ fore200e_init(struct fore200e* fore200e, struct device *parent)
 }
 
 #ifdef CONFIG_SBUS
+static const struct of_device_id fore200e_sba_match[];
 static int __devinit fore200e_sba_probe(struct platform_device *op)
 {
+	const struct of_device_id *match;
 	const struct fore200e_bus *bus;
 	struct fore200e *fore200e;
 	static int index = 0;
 	int err;
 
-	if (!op->dev.of_match)
+	match = of_match_device(fore200e_sba_match, &op->dev);
+	if (!match)
 		return -EINVAL;
-	bus = op->dev.of_match->data;
+	bus = match->data;
 
 	fore200e = kzalloc(sizeof(struct fore200e), GFP_KERNEL);
 	if (!fore200e)
diff --git a/drivers/atm/fore200e.h b/drivers/atm/fore200e.h
index 7f97c09aaea..ba34a02b717 100644
--- a/drivers/atm/fore200e.h
+++ b/drivers/atm/fore200e.h
@@ -263,7 +263,7 @@ typedef enum opcode {
 } opcode_t;
 
 
-/* virtual path / virtual channel identifers */
+/* virtual path / virtual channel identifiers */
 
 typedef struct vpvc {
     BITFIELD3(
@@ -926,7 +926,7 @@ typedef struct fore200e_vcc {
 
 #define PCA200E_PCI_LATENCY      0x40    /* maximum slave latenty            */
 #define PCA200E_PCI_MASTER_CTRL  0x41    /* master control                   */
-#define PCA200E_PCI_THRESHOLD    0x42    /* burst / continous req threshold  */
+#define PCA200E_PCI_THRESHOLD    0x42    /* burst / continuous req threshold  */
 
 /* PBI master control register */
 
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 6cf59bf281d..9a51df4f5b7 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -1801,7 +1801,7 @@ return_host_buffers:
 next_rbrq_entry:
 		he_dev->rbrq_head = (struct he_rbrq *)
 				((unsigned long) he_dev->rbrq_base |
-					RBRQ_MASK(++he_dev->rbrq_head));
+					RBRQ_MASK(he_dev->rbrq_head + 1));
 
 	}
 	read_unlock(&vcc_sklist_lock);
@@ -1884,7 +1884,7 @@ next_tbrq_entry:
 			pci_pool_free(he_dev->tpd_pool, tpd, TPD_ADDR(tpd->status));
 		he_dev->tbrq_head = (struct he_tbrq *)
 				((unsigned long) he_dev->tbrq_base |
-					TBRQ_MASK(++he_dev->tbrq_head));
+					TBRQ_MASK(he_dev->tbrq_head + 1));
 	}
 
 	if (updated) {
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index 24761e1d664..d58e3fcb9db 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -169,13 +169,13 @@ static inline void __init show_version (void) {
   Real Time (cdv and max CDT given)
   
   CBR(pcr)             pcr bandwidth always available
-  rtVBR(pcr,scr,mbs)   scr bandwidth always available, upto pcr at mbs too
+  rtVBR(pcr,scr,mbs)   scr bandwidth always available, up to pcr at mbs too
   
   Non Real Time
   
-  nrtVBR(pcr,scr,mbs)  scr bandwidth always available, upto pcr at mbs too
+  nrtVBR(pcr,scr,mbs)  scr bandwidth always available, up to pcr at mbs too
   UBR()
-  ABR(mcr,pcr)         mcr bandwidth always available, upto pcr (depending) too
+  ABR(mcr,pcr)         mcr bandwidth always available, up to pcr (depending) too
   
   mbs is max burst size (bucket)
   pcr and scr have associated cdvt values
@@ -944,7 +944,7 @@ static void hrz_close_rx (hrz_dev * dev, u16 vc) {
 // to be fixed soon, so do not define TAILRECUSRIONWORKS unless you
 // are sure it does as you may otherwise overflow the kernel stack.
 
-// giving this fn a return value would help GCC, alledgedly
+// giving this fn a return value would help GCC, allegedly
 
 static void rx_schedule (hrz_dev * dev, int irq) {
   unsigned int rx_bytes;
@@ -1036,7 +1036,7 @@ static void rx_schedule (hrz_dev * dev, int irq) {
 	  // VC layer stats
 	  atomic_inc(&vcc->stats->rx);
 	  __net_timestamp(skb);
-	  // end of our responsability
+	  // end of our responsibility
 	  vcc->push (vcc, skb);
 	}
       }
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index bfb7feee040..1f8d724a18b 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -1261,14 +1261,13 @@ idt77252_rx_raw(struct idt77252_dev *card)
 				    PCI_DMA_FROMDEVICE);
 
 	while (head != tail) {
-		unsigned int vpi, vci, pti;
+		unsigned int vpi, vci;
 		u32 header;
 
 		header = le32_to_cpu(*(u32 *) &queue->data[0]);
 
 		vpi = (header & ATM_HDR_VPI_MASK) >> ATM_HDR_VPI_SHIFT;
 		vci = (header & ATM_HDR_VCI_MASK) >> ATM_HDR_VCI_SHIFT;
-		pti = (header & ATM_HDR_PTI_MASK) >> ATM_HDR_PTI_SHIFT;
 
 #ifdef CONFIG_ATM_IDT77252_DEBUG
 		if (debug & DBG_RAW_CELL) {
@@ -2709,53 +2708,10 @@ idt77252_proc_read(struct atm_dev *dev, loff_t * pos, char *page)
 static void
 idt77252_collect_stat(struct idt77252_dev *card)
 {
-	u32 cdc, vpec, icc;
+	(void) readl(SAR_REG_CDC);
+	(void) readl(SAR_REG_VPEC);
+	(void) readl(SAR_REG_ICC);
 
-	cdc = readl(SAR_REG_CDC);
-	vpec = readl(SAR_REG_VPEC);
-	icc = readl(SAR_REG_ICC);
-
-#ifdef	NOTDEF
-	printk("%s:", card->name);
-
-	if (cdc & 0x7f0000) {
-		char *s = "";
-
-		printk(" [");
-		if (cdc & (1 << 22)) {
-			printk("%sRM ID", s);
-			s = " | ";
-		}
-		if (cdc & (1 << 21)) {
-			printk("%sCON TAB", s);
-			s = " | ";
-		}
-		if (cdc & (1 << 20)) {
-			printk("%sNO FB", s);
-			s = " | ";
-		}
-		if (cdc & (1 << 19)) {
-			printk("%sOAM CRC", s);
-			s = " | ";
-		}
-		if (cdc & (1 << 18)) {
-			printk("%sRM CRC", s);
-			s = " | ";
-		}
-		if (cdc & (1 << 17)) {
-			printk("%sRM FIFO", s);
-			s = " | ";
-		}
-		if (cdc & (1 << 16)) {
-			printk("%sRX FIFO", s);
-			s = " | ";
-		}
-		printk("]");
-	}
-
-	printk(" CDC %04x, VPEC %04x, ICC: %04x\n",
-	       cdc & 0xffff, vpec & 0xffff, icc & 0xffff);
-#endif
 }
 
 static irqreturn_t
@@ -3495,7 +3451,7 @@ init_card(struct atm_dev *dev)
 		return -1;
 	}
 	if (dev->phy->ioctl == NULL) {
-		printk("%s: LT had no IOCTL funtion defined.\n", card->name);
+		printk("%s: LT had no IOCTL function defined.\n", card->name);
 		deinit_card(card);
 		return -1;
 	}
diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h
index f53a43ae2bb..3a82cc23a05 100644
--- a/drivers/atm/idt77252.h
+++ b/drivers/atm/idt77252.h
@@ -766,7 +766,7 @@ struct idt77252_dev
 #define SAR_RCTE_BUFFSTAT_MASK 0x00003000  /* buffer status                  */
 #define SAR_RCTE_EFCI          0x00000800  /* EFCI Congestion flag           */
 #define SAR_RCTE_CLP           0x00000400  /* Cell Loss Priority flag        */
-#define SAR_RCTE_CRC           0x00000200  /* Recieved CRC Error             */
+#define SAR_RCTE_CRC           0x00000200  /* Received CRC Error             */
 #define SAR_RCTE_CELLCNT_MASK  0x000001FF  /* cell Count                     */
 
 #define SAR_RCTE_AAL0          0x00000000  /* AAL types for ALL field        */
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index d80d51b62a1..dee4f01a64d 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -613,7 +613,6 @@ static int ia_que_tx (IADEV *iadev) {
    struct sk_buff *skb;
    int num_desc;
    struct atm_vcc *vcc;
-   struct ia_vcc *iavcc;
    num_desc = ia_avail_descs(iadev);
 
    while (num_desc && (skb = skb_dequeue(&iadev->tx_backlog))) {
@@ -627,7 +626,6 @@ static int ia_que_tx (IADEV *iadev) {
          printk("Free the SKB on closed vci %d \n", vcc->vci);
          break;
       }
-      iavcc = INPH_IA_VCC(vcc);
       if (ia_pkt_tx (vcc, skb)) {
          skb_queue_head(&iadev->tx_backlog, skb);
       }
@@ -823,8 +821,6 @@ static void IaFrontEndIntr(IADEV *iadev) {
   volatile IA_SUNI *suni;
   volatile ia_mb25_t *mb25;
   volatile suni_pm7345_t *suni_pm7345;
-  u32 intr_status;
-  u_int frmr_intr;
 
   if(iadev->phy_type & FE_25MBIT_PHY) {
      mb25 = (ia_mb25_t*)iadev->phy;
@@ -832,18 +828,18 @@ static void IaFrontEndIntr(IADEV *iadev) {
   } else if (iadev->phy_type & FE_DS3_PHY) {
      suni_pm7345 = (suni_pm7345_t *)iadev->phy;
      /* clear FRMR interrupts */
-     frmr_intr   = suni_pm7345->suni_ds3_frm_intr_stat; 
+     (void) suni_pm7345->suni_ds3_frm_intr_stat; 
      iadev->carrier_detect =  
            Boolean(!(suni_pm7345->suni_ds3_frm_stat & SUNI_DS3_LOSV));
   } else if (iadev->phy_type & FE_E3_PHY ) {
      suni_pm7345 = (suni_pm7345_t *)iadev->phy;
-     frmr_intr   = suni_pm7345->suni_e3_frm_maint_intr_ind;
+     (void) suni_pm7345->suni_e3_frm_maint_intr_ind;
      iadev->carrier_detect =
            Boolean(!(suni_pm7345->suni_e3_frm_fram_intr_ind_stat&SUNI_E3_LOS));
   }
   else { 
      suni = (IA_SUNI *)iadev->phy;
-     intr_status = suni->suni_rsop_status & 0xff;
+     (void) suni->suni_rsop_status;
      iadev->carrier_detect = Boolean(!(suni->suni_rsop_status & SUNI_LOSV));
   }
   if (iadev->carrier_detect)
@@ -1025,7 +1021,7 @@ static void desc_dbg(IADEV *iadev) {
 } 
   
   
-/*----------------------------- Recieving side stuff --------------------------*/  
+/*----------------------------- Receiving side stuff --------------------------*/  
  
 static void rx_excp_rcvd(struct atm_dev *dev)  
 {  
@@ -1195,7 +1191,7 @@ static void rx_intr(struct atm_dev *dev)
   if (status & RX_PKT_RCVD)  
   {  
 	/* do something */  
-	/* Basically recvd an interrupt for receving a packet.  
+	/* Basically recvd an interrupt for receiving a packet.  
 	A descriptor would have been written to the packet complete   
 	queue. Get all the descriptors and set up dma to move the   
 	packets till the packet complete queue is empty..  
@@ -1855,7 +1851,7 @@ static int open_tx(struct atm_vcc *vcc)
                     return -EINVAL; 
                 }
                 if (vcc->qos.txtp.max_pcr > iadev->LineRate) {
-                   IF_CBR(printk("PCR is not availble\n");)
+                   IF_CBR(printk("PCR is not available\n");)
                    return -1;
                 }
                 vc->type = CBR;
@@ -2660,7 +2656,6 @@ static void ia_close(struct atm_vcc *vcc)
   
 static int ia_open(struct atm_vcc *vcc)
 {  
-	IADEV *iadev;  
 	struct ia_vcc *ia_vcc;  
 	int error;  
 	if (!test_bit(ATM_VF_PARTIAL,&vcc->flags))  
@@ -2668,7 +2663,6 @@ static int ia_open(struct atm_vcc *vcc)
 		IF_EVENT(printk("ia: not partially allocated resources\n");)  
 		vcc->dev_data = NULL;
 	}  
-	iadev = INPH_IA_DEV(vcc->dev);  
 	if (vcc->vci != ATM_VPI_UNSPEC && vcc->vpi != ATM_VCI_UNSPEC)  
 	{  
 		IF_EVENT(printk("iphase open: unspec part\n");)  
@@ -3052,11 +3046,9 @@ static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb) {
 static int ia_send(struct atm_vcc *vcc, struct sk_buff *skb)
 {
         IADEV *iadev; 
-        struct ia_vcc *iavcc;
         unsigned long flags;
 
         iadev = INPH_IA_DEV(vcc->dev);
-        iavcc = INPH_IA_VCC(vcc); 
         if ((!skb)||(skb->len>(iadev->tx_buf_sz-sizeof(struct cpcs_trailer))))
         {
             if (!skb)
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 52880c8387d..4e8ba56f75d 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -1255,7 +1255,7 @@ static inline void lanai_endtx(struct lanai_dev *lanai,
 	/*
 	 * Since the "butt register" is a shared resounce on the card we
 	 * serialize all accesses to it through this spinlock.  This is
-	 * mostly just paranoia sicne the register is rarely "busy" anyway
+	 * mostly just paranoia since the register is rarely "busy" anyway
 	 * but is needed for correctness.
 	 */
 	spin_lock(&lanai->endtxlock);
@@ -1990,7 +1990,7 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai)
 
 /*
  * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll
- * get a CBRZERO interrupt), and we can use it only if noone is receiving
+ * get a CBRZERO interrupt), and we can use it only if no one is receiving
  * AAL0 traffic (since they will use the same queue) - according to the
  * docs we shouldn't even use it for AAL0 traffic
  */
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index cd0ff66469b..5d1d0764513 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -527,7 +527,6 @@ static int flash_upgrade(struct solos_card *card, int chip)
 {
 	const struct firmware *fw;
 	const char *fw_name;
-	uint32_t data32 = 0;
 	int blocksize = 0;
 	int numblocks = 0;
 	int offset;
@@ -576,7 +575,7 @@ static int flash_upgrade(struct solos_card *card, int chip)
 	
 	dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
 	iowrite32(1, card->config_regs + FPGA_MODE);
-	data32 = ioread32(card->config_regs + FPGA_MODE); 
+	(void) ioread32(card->config_regs + FPGA_MODE); 
 
 	/* Set mode to Chip Erase */
 	if(chip == 0 || chip == 2)
diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c
index 49758593a5b..41ce4bd9681 100644
--- a/drivers/auxdisplay/cfag12864b.c
+++ b/drivers/auxdisplay/cfag12864b.c
@@ -49,7 +49,7 @@
 static unsigned int cfag12864b_rate = CONFIG_CFAG12864B_RATE;
 module_param(cfag12864b_rate, uint, S_IRUGO);
 MODULE_PARM_DESC(cfag12864b_rate,
-	"Refresh rate (hertzs)");
+	"Refresh rate (hertz)");
 
 unsigned int cfag12864b_getrate(void)
 {
@@ -60,7 +60,7 @@ unsigned int cfag12864b_getrate(void)
  * cfag12864b Commands
  *
  *	E = Enable signal
- *		Everytime E switch from low to high,
+ *		Every time E switch from low to high,
  *		cfag12864b/ks0108 reads the command/data.
  *
  *	CS1 = First ks0108controller.
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index e9e5238f310..d57e8d0fb82 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -168,11 +168,4 @@ config SYS_HYPERVISOR
 	bool
 	default n
 
-config ARCH_NO_SYSDEV_OPS
-	bool
-	---help---
-	  To be selected by architectures that don't use sysdev class or
-	  sysdev driver power management (suspend/resume) and shutdown
-	  operations.
-
 endmenu
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 19f49e41ce5..a34dca0ad04 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -111,8 +111,6 @@ static inline int driver_match_device(struct device_driver *drv,
 	return drv->bus->match ? drv->bus->match(dev, drv) : 1;
 }
 
-extern void sysdev_shutdown(void);
-
 extern char *make_class_name(const char *name, struct kobject *kobj);
 
 extern int devres_release_all(struct device *dev);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 81b78ede37c..bc8729d603a 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -400,7 +400,7 @@ static void device_remove_groups(struct device *dev,
 static int device_add_attrs(struct device *dev)
 {
 	struct class *class = dev->class;
-	struct device_type *type = dev->type;
+	const struct device_type *type = dev->type;
 	int error;
 
 	if (class) {
@@ -440,7 +440,7 @@ static int device_add_attrs(struct device *dev)
 static void device_remove_attrs(struct device *dev)
 {
 	struct class *class = dev->class;
-	struct device_type *type = dev->type;
+	const struct device_type *type = dev->type;
 
 	device_remove_groups(dev, dev->groups);
 
@@ -1314,8 +1314,7 @@ EXPORT_SYMBOL_GPL(put_device);
 EXPORT_SYMBOL_GPL(device_create_file);
 EXPORT_SYMBOL_GPL(device_remove_file);
 
-struct root_device
-{
+struct root_device {
 	struct device dev;
 	struct module *owner;
 };
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index da57ee9d63f..6658da743c3 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -245,6 +245,10 @@ int device_attach(struct device *dev)
 
 	device_lock(dev);
 	if (dev->driver) {
+		if (klist_node_attached(&dev->p->knode_driver)) {
+			ret = 1;
+			goto out_unlock;
+		}
 		ret = device_bind_driver(dev);
 		if (ret == 0)
 			ret = 1;
@@ -257,6 +261,7 @@ int device_attach(struct device *dev)
 		ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
 		pm_runtime_put_sync(dev);
 	}
+out_unlock:
 	device_unlock(dev);
 	return ret;
 }
@@ -316,8 +321,7 @@ static void __device_release_driver(struct device *dev)
 
 	drv = dev->driver;
 	if (drv) {
-		pm_runtime_get_noresume(dev);
-		pm_runtime_barrier(dev);
+		pm_runtime_get_sync(dev);
 
 		driver_sysfs_remove(dev);
 
@@ -326,6 +330,8 @@ static void __device_release_driver(struct device *dev)
 						     BUS_NOTIFY_UNBIND_DRIVER,
 						     dev);
 
+		pm_runtime_put_sync(dev);
+
 		if (dev->bus && dev->bus->remove)
 			dev->bus->remove(dev);
 		else if (drv->remove)
@@ -338,7 +344,6 @@ static void __device_release_driver(struct device *dev)
 						     BUS_NOTIFY_UNBOUND_DRIVER,
 						     dev);
 
-		pm_runtime_put_sync(dev);
 	}
 }
 
@@ -408,17 +413,16 @@ void *dev_get_drvdata(const struct device *dev)
 }
 EXPORT_SYMBOL(dev_get_drvdata);
 
-void dev_set_drvdata(struct device *dev, void *data)
+int dev_set_drvdata(struct device *dev, void *data)
 {
 	int error;
 
-	if (!dev)
-		return;
 	if (!dev->p) {
 		error = device_private_init(dev);
 		if (error)
-			return;
+			return error;
 	}
 	dev->p->driver_data = data;
+	return 0;
 }
 EXPORT_SYMBOL(dev_set_drvdata);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 8c798ef7f13..bbb03e6f725 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -521,6 +521,11 @@ static int _request_firmware(const struct firmware **firmware_p,
 	if (!firmware_p)
 		return -EINVAL;
 
+	if (WARN_ON(usermodehelper_is_disabled())) {
+		dev_err(device, "firmware: %s will not be loaded\n", name);
+		return -EBUSY;
+	}
+
 	*firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL);
 	if (!firmware) {
 		dev_err(device, "%s: kmalloc(struct firmware) failed\n",
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 3da6a43b775..0a134a424a3 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -48,7 +48,8 @@ static const char *memory_uevent_name(struct kset *kset, struct kobject *kobj)
 	return MEMORY_CLASS_NAME;
 }
 
-static int memory_uevent(struct kset *kset, struct kobject *obj, struct kobj_uevent_env *env)
+static int memory_uevent(struct kset *kset, struct kobject *obj,
+			struct kobj_uevent_env *env)
 {
 	int retval = 0;
 
@@ -228,10 +229,11 @@ int memory_isolate_notify(unsigned long val, void *v)
  * OK to have direct references to sparsemem variables in here.
  */
 static int
-memory_section_action(unsigned long phys_index, unsigned long action)
+memory_block_action(unsigned long phys_index, unsigned long action)
 {
 	int i;
 	unsigned long start_pfn, start_paddr;
+	unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block;
 	struct page *first_page;
 	int ret;
 
@@ -243,7 +245,7 @@ memory_section_action(unsigned long phys_index, unsigned long action)
 	 * that way.
 	 */
 	if (action == MEM_ONLINE) {
-		for (i = 0; i < PAGES_PER_SECTION; i++) {
+		for (i = 0; i < nr_pages; i++) {
 			if (PageReserved(first_page+i))
 				continue;
 
@@ -257,12 +259,12 @@ memory_section_action(unsigned long phys_index, unsigned long action)
 	switch (action) {
 		case MEM_ONLINE:
 			start_pfn = page_to_pfn(first_page);
-			ret = online_pages(start_pfn, PAGES_PER_SECTION);
+			ret = online_pages(start_pfn, nr_pages);
 			break;
 		case MEM_OFFLINE:
 			start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
 			ret = remove_memory(start_paddr,
-					    PAGES_PER_SECTION << PAGE_SHIFT);
+					    nr_pages << PAGE_SHIFT);
 			break;
 		default:
 			WARN(1, KERN_WARNING "%s(%ld, %ld) unknown action: "
@@ -276,7 +278,7 @@ memory_section_action(unsigned long phys_index, unsigned long action)
 static int memory_block_change_state(struct memory_block *mem,
 		unsigned long to_state, unsigned long from_state_req)
 {
-	int i, ret = 0;
+	int ret = 0;
 
 	mutex_lock(&mem->state_mutex);
 
@@ -288,20 +290,11 @@ static int memory_block_change_state(struct memory_block *mem,
 	if (to_state == MEM_OFFLINE)
 		mem->state = MEM_GOING_OFFLINE;
 
-	for (i = 0; i < sections_per_block; i++) {
-		ret = memory_section_action(mem->start_section_nr + i,
-					    to_state);
-		if (ret)
-			break;
-	}
-
-	if (ret) {
-		for (i = 0; i < sections_per_block; i++)
-			memory_section_action(mem->start_section_nr + i,
-					      from_state_req);
+	ret = memory_block_action(mem->start_section_nr, to_state);
 
+	if (ret)
 		mem->state = from_state_req;
-	} else
+	else
 		mem->state = to_state;
 
 out:
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index f051cfff18a..1c291af637b 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -149,6 +149,7 @@ static void platform_device_release(struct device *dev)
 
 	of_device_node_put(&pa->pdev.dev);
 	kfree(pa->pdev.dev.platform_data);
+	kfree(pa->pdev.mfd_cell);
 	kfree(pa->pdev.resource);
 	kfree(pa);
 }
@@ -191,18 +192,18 @@ EXPORT_SYMBOL_GPL(platform_device_alloc);
 int platform_device_add_resources(struct platform_device *pdev,
 				  const struct resource *res, unsigned int num)
 {
-	struct resource *r;
+	struct resource *r = NULL;
 
-	if (!res)
-		return 0;
-
-	r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
-	if (r) {
-		pdev->resource = r;
-		pdev->num_resources = num;
-		return 0;
+	if (res) {
+		r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
+		if (!r)
+			return -ENOMEM;
 	}
-	return -ENOMEM;
+
+	kfree(pdev->resource);
+	pdev->resource = r;
+	pdev->num_resources = num;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(platform_device_add_resources);
 
@@ -219,17 +220,17 @@ EXPORT_SYMBOL_GPL(platform_device_add_resources);
 int platform_device_add_data(struct platform_device *pdev, const void *data,
 			     size_t size)
 {
-	void *d;
+	void *d = NULL;
 
-	if (!data)
-		return 0;
-
-	d = kmemdup(data, size, GFP_KERNEL);
-	if (d) {
-		pdev->dev.platform_data = d;
-		return 0;
+	if (data) {
+		d = kmemdup(data, size, GFP_KERNEL);
+		if (!d)
+			return -ENOMEM;
 	}
-	return -ENOMEM;
+
+	kfree(pdev->dev.platform_data);
+	pdev->dev.platform_data = d;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(platform_device_add_data);
 
@@ -666,7 +667,7 @@ static int platform_legacy_resume(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_prepare(struct device *dev)
+int platform_pm_prepare(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -677,7 +678,7 @@ static int platform_pm_prepare(struct device *dev)
 	return ret;
 }
 
-static void platform_pm_complete(struct device *dev)
+void platform_pm_complete(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 
@@ -685,16 +686,11 @@ static void platform_pm_complete(struct device *dev)
 		drv->pm->complete(dev);
 }
 
-#else /* !CONFIG_PM_SLEEP */
-
-#define platform_pm_prepare		NULL
-#define platform_pm_complete		NULL
-
-#endif /* !CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM_SLEEP */
 
 #ifdef CONFIG_SUSPEND
 
-int __weak platform_pm_suspend(struct device *dev)
+int platform_pm_suspend(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -712,7 +708,7 @@ int __weak platform_pm_suspend(struct device *dev)
 	return ret;
 }
 
-int __weak platform_pm_suspend_noirq(struct device *dev)
+int platform_pm_suspend_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -728,7 +724,7 @@ int __weak platform_pm_suspend_noirq(struct device *dev)
 	return ret;
 }
 
-int __weak platform_pm_resume(struct device *dev)
+int platform_pm_resume(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -746,7 +742,7 @@ int __weak platform_pm_resume(struct device *dev)
 	return ret;
 }
 
-int __weak platform_pm_resume_noirq(struct device *dev)
+int platform_pm_resume_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -762,18 +758,11 @@ int __weak platform_pm_resume_noirq(struct device *dev)
 	return ret;
 }
 
-#else /* !CONFIG_SUSPEND */
-
-#define platform_pm_suspend		NULL
-#define platform_pm_resume		NULL
-#define platform_pm_suspend_noirq	NULL
-#define platform_pm_resume_noirq	NULL
-
-#endif /* !CONFIG_SUSPEND */
+#endif /* CONFIG_SUSPEND */
 
-#ifdef CONFIG_HIBERNATION
+#ifdef CONFIG_HIBERNATE_CALLBACKS
 
-static int platform_pm_freeze(struct device *dev)
+int platform_pm_freeze(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -791,7 +780,7 @@ static int platform_pm_freeze(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_freeze_noirq(struct device *dev)
+int platform_pm_freeze_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -807,7 +796,7 @@ static int platform_pm_freeze_noirq(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_thaw(struct device *dev)
+int platform_pm_thaw(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -825,7 +814,7 @@ static int platform_pm_thaw(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_thaw_noirq(struct device *dev)
+int platform_pm_thaw_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -841,7 +830,7 @@ static int platform_pm_thaw_noirq(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_poweroff(struct device *dev)
+int platform_pm_poweroff(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -859,7 +848,7 @@ static int platform_pm_poweroff(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_poweroff_noirq(struct device *dev)
+int platform_pm_poweroff_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -875,7 +864,7 @@ static int platform_pm_poweroff_noirq(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_restore(struct device *dev)
+int platform_pm_restore(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -893,7 +882,7 @@ static int platform_pm_restore(struct device *dev)
 	return ret;
 }
 
-static int platform_pm_restore_noirq(struct device *dev)
+int platform_pm_restore_noirq(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
 	int ret = 0;
@@ -909,62 +898,13 @@ static int platform_pm_restore_noirq(struct device *dev)
 	return ret;
 }
 
-#else /* !CONFIG_HIBERNATION */
-
-#define platform_pm_freeze		NULL
-#define platform_pm_thaw		NULL
-#define platform_pm_poweroff		NULL
-#define platform_pm_restore		NULL
-#define platform_pm_freeze_noirq	NULL
-#define platform_pm_thaw_noirq		NULL
-#define platform_pm_poweroff_noirq	NULL
-#define platform_pm_restore_noirq	NULL
-
-#endif /* !CONFIG_HIBERNATION */
-
-#ifdef CONFIG_PM_RUNTIME
-
-int __weak platform_pm_runtime_suspend(struct device *dev)
-{
-	return pm_generic_runtime_suspend(dev);
-};
-
-int __weak platform_pm_runtime_resume(struct device *dev)
-{
-	return pm_generic_runtime_resume(dev);
-};
-
-int __weak platform_pm_runtime_idle(struct device *dev)
-{
-	return pm_generic_runtime_idle(dev);
-};
-
-#else /* !CONFIG_PM_RUNTIME */
-
-#define platform_pm_runtime_suspend NULL
-#define platform_pm_runtime_resume NULL
-#define platform_pm_runtime_idle NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
 
 static const struct dev_pm_ops platform_dev_pm_ops = {
-	.prepare = platform_pm_prepare,
-	.complete = platform_pm_complete,
-	.suspend = platform_pm_suspend,
-	.resume = platform_pm_resume,
-	.freeze = platform_pm_freeze,
-	.thaw = platform_pm_thaw,
-	.poweroff = platform_pm_poweroff,
-	.restore = platform_pm_restore,
-	.suspend_noirq = platform_pm_suspend_noirq,
-	.resume_noirq = platform_pm_resume_noirq,
-	.freeze_noirq = platform_pm_freeze_noirq,
-	.thaw_noirq = platform_pm_thaw_noirq,
-	.poweroff_noirq = platform_pm_poweroff_noirq,
-	.restore_noirq = platform_pm_restore_noirq,
-	.runtime_suspend = platform_pm_runtime_suspend,
-	.runtime_resume = platform_pm_runtime_resume,
-	.runtime_idle = platform_pm_runtime_idle,
+	.runtime_suspend = pm_generic_runtime_suspend,
+	.runtime_resume = pm_generic_runtime_resume,
+	.runtime_idle = pm_generic_runtime_idle,
+	USE_PLATFORM_PM_SLEEP_OPS
 };
 
 struct bus_type platform_bus_type = {
@@ -976,41 +916,6 @@ struct bus_type platform_bus_type = {
 };
 EXPORT_SYMBOL_GPL(platform_bus_type);
 
-/**
- * platform_bus_get_pm_ops() - return pointer to busses dev_pm_ops
- *
- * This function can be used by platform code to get the current
- * set of dev_pm_ops functions used by the platform_bus_type.
- */
-const struct dev_pm_ops * __init platform_bus_get_pm_ops(void)
-{
-	return platform_bus_type.pm;
-}
-
-/**
- * platform_bus_set_pm_ops() - update dev_pm_ops for the platform_bus_type
- *
- * @pm: pointer to new dev_pm_ops struct to be used for platform_bus_type
- *
- * Platform code can override the dev_pm_ops methods of
- * platform_bus_type by using this function.  It is expected that
- * platform code will first do a platform_bus_get_pm_ops(), then
- * kmemdup it, then customize selected methods and pass a pointer to
- * the new struct dev_pm_ops to this function.
- *
- * Since platform-specific code is customizing methods for *all*
- * devices (not just platform-specific devices) it is expected that
- * any custom overrides of these functions will keep existing behavior
- * and simply extend it.  For example, any customization of the
- * runtime PM methods should continue to call the pm_generic_*
- * functions as the default ones do in addition to the
- * platform-specific behavior.
- */
-void __init platform_bus_set_pm_ops(const struct dev_pm_ops *pm)
-{
-	platform_bus_type.pm = pm;
-}
-
 int __init platform_bus_init(void)
 {
 	int error;
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 118c1b92a51..3647e114d0e 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -3,6 +3,6 @@ obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_RUNTIME)	+= runtime.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
 obj-$(CONFIG_PM_OPP)	+= opp.o
+obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
 
-ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
-ccflags-$(CONFIG_PM_VERBOSE)   += -DDEBUG
+ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
\ No newline at end of file
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
new file mode 100644
index 00000000000..c0dd09df7be
--- /dev/null
+++ b/drivers/base/power/clock_ops.c
@@ -0,0 +1,431 @@
+/*
+ * drivers/base/power/clock_ops.c - Generic clock manipulation PM callbacks
+ *
+ * Copyright (c) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+struct pm_runtime_clk_data {
+	struct list_head clock_list;
+	struct mutex lock;
+};
+
+enum pce_status {
+	PCE_STATUS_NONE = 0,
+	PCE_STATUS_ACQUIRED,
+	PCE_STATUS_ENABLED,
+	PCE_STATUS_ERROR,
+};
+
+struct pm_clock_entry {
+	struct list_head node;
+	char *con_id;
+	struct clk *clk;
+	enum pce_status status;
+};
+
+static struct pm_runtime_clk_data *__to_prd(struct device *dev)
+{
+	return dev ? dev->power.subsys_data : NULL;
+}
+
+/**
+ * pm_runtime_clk_add - Start using a device clock for runtime PM.
+ * @dev: Device whose clock is going to be used for runtime PM.
+ * @con_id: Connection ID of the clock.
+ *
+ * Add the clock represented by @con_id to the list of clocks used for
+ * the runtime PM of @dev.
+ */
+int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	if (!prd)
+		return -EINVAL;
+
+	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+	if (!ce) {
+		dev_err(dev, "Not enough memory for clock entry.\n");
+		return -ENOMEM;
+	}
+
+	if (con_id) {
+		ce->con_id = kstrdup(con_id, GFP_KERNEL);
+		if (!ce->con_id) {
+			dev_err(dev,
+				"Not enough memory for clock connection ID.\n");
+			kfree(ce);
+			return -ENOMEM;
+		}
+	}
+
+	mutex_lock(&prd->lock);
+	list_add_tail(&ce->node, &prd->clock_list);
+	mutex_unlock(&prd->lock);
+	return 0;
+}
+
+/**
+ * __pm_runtime_clk_remove - Destroy runtime PM clock entry.
+ * @ce: Runtime PM clock entry to destroy.
+ *
+ * This routine must be called under the mutex protecting the runtime PM list
+ * of clocks corresponding the the @ce's device.
+ */
+static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
+{
+	if (!ce)
+		return;
+
+	list_del(&ce->node);
+
+	if (ce->status < PCE_STATUS_ERROR) {
+		if (ce->status == PCE_STATUS_ENABLED)
+			clk_disable(ce->clk);
+
+		if (ce->status >= PCE_STATUS_ACQUIRED)
+			clk_put(ce->clk);
+	}
+
+	if (ce->con_id)
+		kfree(ce->con_id);
+
+	kfree(ce);
+}
+
+/**
+ * pm_runtime_clk_remove - Stop using a device clock for runtime PM.
+ * @dev: Device whose clock should not be used for runtime PM any more.
+ * @con_id: Connection ID of the clock.
+ *
+ * Remove the clock represented by @con_id from the list of clocks used for
+ * the runtime PM of @dev.
+ */
+void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	if (!prd)
+		return;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry(ce, &prd->clock_list, node) {
+		if (!con_id && !ce->con_id) {
+			__pm_runtime_clk_remove(ce);
+			break;
+		} else if (!con_id || !ce->con_id) {
+			continue;
+		} else if (!strcmp(con_id, ce->con_id)) {
+			__pm_runtime_clk_remove(ce);
+			break;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+}
+
+/**
+ * pm_runtime_clk_init - Initialize a device's list of runtime PM clocks.
+ * @dev: Device to initialize the list of runtime PM clocks for.
+ *
+ * Allocate a struct pm_runtime_clk_data object, initialize its lock member and
+ * make the @dev's power.subsys_data field point to it.
+ */
+int pm_runtime_clk_init(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd;
+
+	prd = kzalloc(sizeof(*prd), GFP_KERNEL);
+	if (!prd) {
+		dev_err(dev, "Not enough memory fo runtime PM data.\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&prd->clock_list);
+	mutex_init(&prd->lock);
+	dev->power.subsys_data = prd;
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_destroy - Destroy a device's list of runtime PM clocks.
+ * @dev: Device to destroy the list of runtime PM clocks for.
+ *
+ * Clear the @dev's power.subsys_data field, remove the list of clock entries
+ * from the struct pm_runtime_clk_data object pointed to by it before and free
+ * that object.
+ */
+void pm_runtime_clk_destroy(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce, *c;
+
+	if (!prd)
+		return;
+
+	dev->power.subsys_data = NULL;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry_safe_reverse(ce, c, &prd->clock_list, node)
+		__pm_runtime_clk_remove(ce);
+
+	mutex_unlock(&prd->lock);
+
+	kfree(prd);
+}
+
+/**
+ * pm_runtime_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @con_id: Connection ID of the clock.
+ */
+static void pm_runtime_clk_acquire(struct device *dev,
+				    struct pm_clock_entry *ce)
+{
+	ce->clk = clk_get(dev, ce->con_id);
+	if (IS_ERR(ce->clk)) {
+		ce->status = PCE_STATUS_ERROR;
+	} else {
+		ce->status = PCE_STATUS_ACQUIRED;
+		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+	}
+}
+
+/**
+ * pm_runtime_clk_suspend - Disable clocks in a device's runtime PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_runtime_clk_suspend(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	if (!prd)
+		return 0;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry_reverse(ce, &prd->clock_list, node) {
+		if (ce->status == PCE_STATUS_NONE)
+			pm_runtime_clk_acquire(dev, ce);
+
+		if (ce->status < PCE_STATUS_ERROR) {
+			clk_disable(ce->clk);
+			ce->status = PCE_STATUS_ACQUIRED;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_resume - Enable clocks in a device's runtime PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_runtime_clk_resume(struct device *dev)
+{
+	struct pm_runtime_clk_data *prd = __to_prd(dev);
+	struct pm_clock_entry *ce;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	if (!prd)
+		return 0;
+
+	mutex_lock(&prd->lock);
+
+	list_for_each_entry(ce, &prd->clock_list, node) {
+		if (ce->status == PCE_STATUS_NONE)
+			pm_runtime_clk_acquire(dev, ce);
+
+		if (ce->status < PCE_STATUS_ERROR) {
+			clk_enable(ce->clk);
+			ce->status = PCE_STATUS_ENABLED;
+		}
+	}
+
+	mutex_unlock(&prd->lock);
+
+	return 0;
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the pwr_domain member of that object is copied to the device's
+ * pwr_domain field and its con_ids member is used to populate the device's list
+ * of runtime PM clocks, depending on @action.
+ *
+ * If the device's pwr_domain field is already populated with a value different
+ * from the one stored in the struct pm_clk_notifier_block object, the function
+ * does nothing.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+				 unsigned long action, void *data)
+{
+	struct pm_clk_notifier_block *clknb;
+	struct device *dev = data;
+	char *con_id;
+	int error;
+
+	dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+	clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->pwr_domain)
+			break;
+
+		error = pm_runtime_clk_init(dev);
+		if (error)
+			break;
+
+		dev->pwr_domain = clknb->pwr_domain;
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				pm_runtime_clk_add(dev, con_id);
+		} else {
+			pm_runtime_clk_add(dev, NULL);
+		}
+
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->pwr_domain != clknb->pwr_domain)
+			break;
+
+		dev->pwr_domain = NULL;
+		pm_runtime_clk_destroy(dev);
+		break;
+	}
+
+	return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+/**
+ * enable_clock - Enable a device clock.
+ * @dev: Device whose clock is to be enabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void enable_clock(struct device *dev, const char *con_id)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, con_id);
+	if (!IS_ERR(clk)) {
+		clk_enable(clk);
+		clk_put(clk);
+		dev_info(dev, "Runtime PM disabled, clock forced on.\n");
+	}
+}
+
+/**
+ * disable_clock - Disable a device clock.
+ * @dev: Device whose clock is to be disabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void disable_clock(struct device *dev, const char *con_id)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, con_id);
+	if (!IS_ERR(clk)) {
+		clk_disable(clk);
+		clk_put(clk);
+		dev_info(dev, "Runtime PM disabled, clock forced off.\n");
+	}
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the con_ids member of that object is used to enable or disable
+ * the device's clocks, depending on @action.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+				 unsigned long action, void *data)
+{
+	struct pm_clk_notifier_block *clknb;
+	struct device *dev = data;
+	char *con_id;
+
+	dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+	clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				enable_clock(dev, con_id);
+		} else {
+			enable_clock(dev, NULL);
+		}
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (clknb->con_ids[0]) {
+			for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+				disable_clock(dev, con_id);
+		} else {
+			disable_clock(dev, NULL);
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+/**
+ * pm_runtime_clk_add_notifier - Add bus type notifier for runtime PM clocks.
+ * @bus: Bus type to add the notifier to.
+ * @clknb: Notifier to be added to the given bus type.
+ *
+ * The nb member of @clknb is not expected to be initialized and its
+ * notifier_call member will be replaced with pm_runtime_clk_notify().  However,
+ * the remaining members of @clknb should be populated prior to calling this
+ * routine.
+ */
+void pm_runtime_clk_add_notifier(struct bus_type *bus,
+				 struct pm_clk_notifier_block *clknb)
+{
+	if (!bus || !clknb)
+		return;
+
+	clknb->nb.notifier_call = pm_runtime_clk_notify;
+	bus_register_notifier(bus, &clknb->nb);
+}
diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
index 42f97f92562..cb3bb368681 100644
--- a/drivers/base/power/generic_ops.c
+++ b/drivers/base/power/generic_ops.c
@@ -74,6 +74,23 @@ EXPORT_SYMBOL_GPL(pm_generic_runtime_resume);
 
 #ifdef CONFIG_PM_SLEEP
 /**
+ * pm_generic_prepare - Generic routine preparing a device for power transition.
+ * @dev: Device to prepare.
+ *
+ * Prepare a device for a system-wide power transition.
+ */
+int pm_generic_prepare(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (drv && drv->pm && drv->pm->prepare)
+		ret = drv->pm->prepare(dev);
+
+	return ret;
+}
+
+/**
  * __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback.
  * @dev: Device to handle.
  * @event: PM transition of the system under way.
@@ -213,16 +230,38 @@ int pm_generic_restore(struct device *dev)
 	return __pm_generic_resume(dev, PM_EVENT_RESTORE);
 }
 EXPORT_SYMBOL_GPL(pm_generic_restore);
+
+/**
+ * pm_generic_complete - Generic routine competing a device power transition.
+ * @dev: Device to handle.
+ *
+ * Complete a device power transition during a system-wide power transition.
+ */
+void pm_generic_complete(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+
+	if (drv && drv->pm && drv->pm->complete)
+		drv->pm->complete(dev);
+
+	/*
+	 * Let runtime PM try to suspend devices that haven't been in use before
+	 * going into the system-wide sleep state we're resuming from.
+	 */
+	pm_runtime_idle(dev);
+}
 #endif /* CONFIG_PM_SLEEP */
 
 struct dev_pm_ops generic_subsys_pm_ops = {
 #ifdef CONFIG_PM_SLEEP
+	.prepare = pm_generic_prepare,
 	.suspend = pm_generic_suspend,
 	.resume = pm_generic_resume,
 	.freeze = pm_generic_freeze,
 	.thaw = pm_generic_thaw,
 	.poweroff = pm_generic_poweroff,
 	.restore = pm_generic_restore,
+	.complete = pm_generic_complete,
 #endif
 #ifdef CONFIG_PM_RUNTIME
 	.runtime_suspend = pm_generic_runtime_suspend,
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 052dc53eef3..aa632020774 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -63,6 +63,7 @@ void device_pm_init(struct device *dev)
 	dev->power.wakeup = NULL;
 	spin_lock_init(&dev->power.lock);
 	pm_runtime_init(dev);
+	INIT_LIST_HEAD(&dev->power.entry);
 }
 
 /**
@@ -233,7 +234,7 @@ static int pm_op(struct device *dev,
 		}
 		break;
 #endif /* CONFIG_SUSPEND */
-#ifdef CONFIG_HIBERNATION
+#ifdef CONFIG_HIBERNATE_CALLBACKS
 	case PM_EVENT_FREEZE:
 	case PM_EVENT_QUIESCE:
 		if (ops->freeze) {
@@ -260,7 +261,7 @@ static int pm_op(struct device *dev,
 			suspend_report_result(ops->restore, error);
 		}
 		break;
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
 	default:
 		error = -EINVAL;
 	}
@@ -308,7 +309,7 @@ static int pm_noirq_op(struct device *dev,
 		}
 		break;
 #endif /* CONFIG_SUSPEND */
-#ifdef CONFIG_HIBERNATION
+#ifdef CONFIG_HIBERNATE_CALLBACKS
 	case PM_EVENT_FREEZE:
 	case PM_EVENT_QUIESCE:
 		if (ops->freeze_noirq) {
@@ -335,7 +336,7 @@ static int pm_noirq_op(struct device *dev,
 			suspend_report_result(ops->restore_noirq, error);
 		}
 		break;
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
 	default:
 		error = -EINVAL;
 	}
@@ -425,10 +426,8 @@ static int device_resume_noirq(struct device *dev, pm_message_t state)
 
 	if (dev->pwr_domain) {
 		pm_dev_dbg(dev, state, "EARLY power domain ");
-		pm_noirq_op(dev, &dev->pwr_domain->ops, state);
-	}
-
-	if (dev->type && dev->type->pm) {
+		error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "EARLY type ");
 		error = pm_noirq_op(dev, dev->type->pm, state);
 	} else if (dev->class && dev->class->pm) {
@@ -516,7 +515,8 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 
 	if (dev->pwr_domain) {
 		pm_dev_dbg(dev, state, "power domain ");
-		pm_op(dev, &dev->pwr_domain->ops, state);
+		error = pm_op(dev, &dev->pwr_domain->ops, state);
+		goto End;
 	}
 
 	if (dev->type && dev->type->pm) {
@@ -579,11 +579,13 @@ static bool is_async(struct device *dev)
  * Execute the appropriate "resume" callback for all devices whose status
  * indicates that they are suspended.
  */
-static void dpm_resume(pm_message_t state)
+void dpm_resume(pm_message_t state)
 {
 	struct device *dev;
 	ktime_t starttime = ktime_get();
 
+	might_sleep();
+
 	mutex_lock(&dpm_list_mtx);
 	pm_transition = state;
 	async_error = 0;
@@ -628,12 +630,11 @@ static void device_complete(struct device *dev, pm_message_t state)
 {
 	device_lock(dev);
 
-	if (dev->pwr_domain && dev->pwr_domain->ops.complete) {
+	if (dev->pwr_domain) {
 		pm_dev_dbg(dev, state, "completing power domain ");
-		dev->pwr_domain->ops.complete(dev);
-	}
-
-	if (dev->type && dev->type->pm) {
+		if (dev->pwr_domain->ops.complete)
+			dev->pwr_domain->ops.complete(dev);
+	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "completing type ");
 		if (dev->type->pm->complete)
 			dev->type->pm->complete(dev);
@@ -657,10 +658,12 @@ static void device_complete(struct device *dev, pm_message_t state)
  * Execute the ->complete() callbacks for all devices whose PM status is not
  * DPM_ON (this allows new devices to be registered).
  */
-static void dpm_complete(pm_message_t state)
+void dpm_complete(pm_message_t state)
 {
 	struct list_head list;
 
+	might_sleep();
+
 	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
 	while (!list_empty(&dpm_prepared_list)) {
@@ -689,7 +692,6 @@ static void dpm_complete(pm_message_t state)
  */
 void dpm_resume_end(pm_message_t state)
 {
-	might_sleep();
 	dpm_resume(state);
 	dpm_complete(state);
 }
@@ -731,7 +733,12 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state)
 {
 	int error;
 
-	if (dev->type && dev->type->pm) {
+	if (dev->pwr_domain) {
+		pm_dev_dbg(dev, state, "LATE power domain ");
+		error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+		if (error)
+			return error;
+	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "LATE type ");
 		error = pm_noirq_op(dev, dev->type->pm, state);
 		if (error)
@@ -748,11 +755,6 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state)
 			return error;
 	}
 
-	if (dev->pwr_domain) {
-		pm_dev_dbg(dev, state, "LATE power domain ");
-		pm_noirq_op(dev, &dev->pwr_domain->ops, state);
-	}
-
 	return 0;
 }
 
@@ -840,21 +842,27 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		goto End;
 	}
 
+	if (dev->pwr_domain) {
+		pm_dev_dbg(dev, state, "power domain ");
+		error = pm_op(dev, &dev->pwr_domain->ops, state);
+		goto End;
+	}
+
 	if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "type ");
 		error = pm_op(dev, dev->type->pm, state);
-		goto Domain;
+		goto End;
 	}
 
 	if (dev->class) {
 		if (dev->class->pm) {
 			pm_dev_dbg(dev, state, "class ");
 			error = pm_op(dev, dev->class->pm, state);
-			goto Domain;
+			goto End;
 		} else if (dev->class->suspend) {
 			pm_dev_dbg(dev, state, "legacy class ");
 			error = legacy_suspend(dev, state, dev->class->suspend);
-			goto Domain;
+			goto End;
 		}
 	}
 
@@ -868,12 +876,6 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		}
 	}
 
- Domain:
-	if (!error && dev->pwr_domain) {
-		pm_dev_dbg(dev, state, "power domain ");
-		pm_op(dev, &dev->pwr_domain->ops, state);
-	}
-
  End:
 	device_unlock(dev);
 	complete_all(&dev->power.completion);
@@ -913,11 +915,13 @@ static int device_suspend(struct device *dev)
  * dpm_suspend - Execute "suspend" callbacks for all non-sysdev devices.
  * @state: PM transition of the system being carried out.
  */
-static int dpm_suspend(pm_message_t state)
+int dpm_suspend(pm_message_t state)
 {
 	ktime_t starttime = ktime_get();
 	int error = 0;
 
+	might_sleep();
+
 	mutex_lock(&dpm_list_mtx);
 	pm_transition = state;
 	async_error = 0;
@@ -964,7 +968,14 @@ static int device_prepare(struct device *dev, pm_message_t state)
 
 	device_lock(dev);
 
-	if (dev->type && dev->type->pm) {
+	if (dev->pwr_domain) {
+		pm_dev_dbg(dev, state, "preparing power domain ");
+		if (dev->pwr_domain->ops.prepare)
+			error = dev->pwr_domain->ops.prepare(dev);
+		suspend_report_result(dev->pwr_domain->ops.prepare, error);
+		if (error)
+			goto End;
+	} else if (dev->type && dev->type->pm) {
 		pm_dev_dbg(dev, state, "preparing type ");
 		if (dev->type->pm->prepare)
 			error = dev->type->pm->prepare(dev);
@@ -983,13 +994,6 @@ static int device_prepare(struct device *dev, pm_message_t state)
 		if (dev->bus->pm->prepare)
 			error = dev->bus->pm->prepare(dev);
 		suspend_report_result(dev->bus->pm->prepare, error);
-		if (error)
-			goto End;
-	}
-
-	if (dev->pwr_domain && dev->pwr_domain->ops.prepare) {
-		pm_dev_dbg(dev, state, "preparing power domain ");
-		dev->pwr_domain->ops.prepare(dev);
 	}
 
  End:
@@ -1004,10 +1008,12 @@ static int device_prepare(struct device *dev, pm_message_t state)
  *
  * Execute the ->prepare() callback(s) for all devices.
  */
-static int dpm_prepare(pm_message_t state)
+int dpm_prepare(pm_message_t state)
 {
 	int error = 0;
 
+	might_sleep();
+
 	mutex_lock(&dpm_list_mtx);
 	while (!list_empty(&dpm_list)) {
 		struct device *dev = to_device(dpm_list.next);
@@ -1056,7 +1062,6 @@ int dpm_suspend_start(pm_message_t state)
 {
 	int error;
 
-	might_sleep();
 	error = dpm_prepare(state);
 	if (!error)
 		error = dpm_suspend(state);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 54597c859ec..0d4587b15c5 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -168,7 +168,6 @@ static int rpm_check_suspend_allowed(struct device *dev)
 static int rpm_idle(struct device *dev, int rpmflags)
 {
 	int (*callback)(struct device *);
-	int (*domain_callback)(struct device *);
 	int retval;
 
 	retval = rpm_check_suspend_allowed(dev);
@@ -214,7 +213,9 @@ static int rpm_idle(struct device *dev, int rpmflags)
 
 	dev->power.idle_notification = true;
 
-	if (dev->type && dev->type->pm)
+	if (dev->pwr_domain)
+		callback = dev->pwr_domain->ops.runtime_idle;
+	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_idle;
 	else if (dev->class && dev->class->pm)
 		callback = dev->class->pm->runtime_idle;
@@ -223,19 +224,10 @@ static int rpm_idle(struct device *dev, int rpmflags)
 	else
 		callback = NULL;
 
-	if (dev->pwr_domain)
-		domain_callback = dev->pwr_domain->ops.runtime_idle;
-	else
-		domain_callback = NULL;
-
-	if (callback || domain_callback) {
+	if (callback) {
 		spin_unlock_irq(&dev->power.lock);
 
-		if (domain_callback)
-			retval = domain_callback(dev);
-
-		if (!retval && callback)
-			callback(dev);
+		callback(dev);
 
 		spin_lock_irq(&dev->power.lock);
 	}
@@ -382,7 +374,9 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 
 	__update_runtime_status(dev, RPM_SUSPENDING);
 
-	if (dev->type && dev->type->pm)
+	if (dev->pwr_domain)
+		callback = dev->pwr_domain->ops.runtime_suspend;
+	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_suspend;
 	else if (dev->class && dev->class->pm)
 		callback = dev->class->pm->runtime_suspend;
@@ -400,8 +394,6 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 		else
 			pm_runtime_cancel_pending(dev);
 	} else {
-		if (dev->pwr_domain)
-			rpm_callback(dev->pwr_domain->ops.runtime_suspend, dev);
  no_callback:
 		__update_runtime_status(dev, RPM_SUSPENDED);
 		pm_runtime_deactivate_timer(dev);
@@ -443,7 +435,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
  *
  * Check if the device's run-time PM status allows it to be resumed.  Cancel
  * any scheduled or pending requests.  If another resume has been started
- * earlier, either return imediately or wait for it to finish, depending on the
+ * earlier, either return immediately or wait for it to finish, depending on the
  * RPM_NOWAIT and RPM_ASYNC flags.  Similarly, if there's a suspend running in
  * parallel with this function, either tell the other process to resume after
  * suspending (deferred_resume) or wait for it to finish.  If the RPM_ASYNC
@@ -582,9 +574,8 @@ static int rpm_resume(struct device *dev, int rpmflags)
 	__update_runtime_status(dev, RPM_RESUMING);
 
 	if (dev->pwr_domain)
-		rpm_callback(dev->pwr_domain->ops.runtime_resume, dev);
-
-	if (dev->type && dev->type->pm)
+		callback = dev->pwr_domain->ops.runtime_resume;
+	else if (dev->type && dev->type->pm)
 		callback = dev->type->pm->runtime_resume;
 	else if (dev->class && dev->class->pm)
 		callback = dev->class->pm->runtime_resume;
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index fff49bee781..a9f5b897961 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -212,8 +212,9 @@ static ssize_t autosuspend_delay_ms_store(struct device *dev,
 static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show,
 		autosuspend_delay_ms_store);
 
-#endif
+#endif /* CONFIG_PM_RUNTIME */
 
+#ifdef CONFIG_PM_SLEEP
 static ssize_t
 wake_show(struct device * dev, struct device_attribute *attr, char * buf)
 {
@@ -248,7 +249,6 @@ wake_store(struct device * dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
 
-#ifdef CONFIG_PM_SLEEP
 static ssize_t wakeup_count_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index 4573c83df6d..84f7c7d5a09 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -110,7 +110,6 @@ void wakeup_source_add(struct wakeup_source *ws)
 	spin_lock_irq(&events_lock);
 	list_add_rcu(&ws->entry, &wakeup_sources);
 	spin_unlock_irq(&events_lock);
-	synchronize_rcu();
 }
 EXPORT_SYMBOL_GPL(wakeup_source_add);
 
@@ -258,7 +257,7 @@ void device_set_wakeup_capable(struct device *dev, bool capable)
 	if (!!dev->power.can_wakeup == !!capable)
 		return;
 
-	if (device_is_registered(dev)) {
+	if (device_is_registered(dev) && !list_empty(&dev->power.entry)) {
 		if (capable) {
 			if (wakeup_sysfs_add(dev))
 				return;
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index fbe72da6c41..9dff77bfe1e 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -197,7 +197,7 @@ kset_put:
 }
 
 /**
- *	sysdev_driver_register - Register auxillary driver
+ *	sysdev_driver_register - Register auxiliary driver
  *	@cls:	Device class driver belongs to.
  *	@drv:	Driver.
  *
@@ -250,7 +250,7 @@ unlock:
 }
 
 /**
- *	sysdev_driver_unregister - Remove an auxillary driver.
+ *	sysdev_driver_unregister - Remove an auxiliary driver.
  *	@cls:	Class driver belongs to.
  *	@drv:	Driver.
  */
@@ -302,7 +302,7 @@ int sysdev_register(struct sys_device *sysdev)
 		 * code that should have called us.
 		 */
 
-		/* Notify class auxillary drivers */
+		/* Notify class auxiliary drivers */
 		list_for_each_entry(drv, &cls->drivers, entry) {
 			if (drv->add)
 				drv->add(sysdev);
@@ -328,203 +328,8 @@ void sysdev_unregister(struct sys_device *sysdev)
 	kobject_put(&sysdev->kobj);
 }
 
-
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-/**
- *	sysdev_shutdown - Shut down all system devices.
- *
- *	Loop over each class of system devices, and the devices in each
- *	of those classes. For each device, we call the shutdown method for
- *	each driver registered for the device - the auxillaries,
- *	and the class driver.
- *
- *	Note: The list is iterated in reverse order, so that we shut down
- *	child devices before we shut down their parents. The list ordering
- *	is guaranteed by virtue of the fact that child devices are registered
- *	after their parents.
- */
-void sysdev_shutdown(void)
-{
-	struct sysdev_class *cls;
-
-	pr_debug("Shutting Down System Devices\n");
-
-	mutex_lock(&sysdev_drivers_lock);
-	list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
-		struct sys_device *sysdev;
-
-		pr_debug("Shutting down type '%s':\n",
-			 kobject_name(&cls->kset.kobj));
-
-		list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
-			struct sysdev_driver *drv;
-			pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
-			/* Call auxillary drivers first */
-			list_for_each_entry(drv, &cls->drivers, entry) {
-				if (drv->shutdown)
-					drv->shutdown(sysdev);
-			}
-
-			/* Now call the generic one */
-			if (cls->shutdown)
-				cls->shutdown(sysdev);
-		}
-	}
-	mutex_unlock(&sysdev_drivers_lock);
-}
-
-static void __sysdev_resume(struct sys_device *dev)
-{
-	struct sysdev_class *cls = dev->cls;
-	struct sysdev_driver *drv;
-
-	/* First, call the class-specific one */
-	if (cls->resume)
-		cls->resume(dev);
-	WARN_ONCE(!irqs_disabled(),
-		"Interrupts enabled after %pF\n", cls->resume);
-
-	/* Call auxillary drivers next. */
-	list_for_each_entry(drv, &cls->drivers, entry) {
-		if (drv->resume)
-			drv->resume(dev);
-		WARN_ONCE(!irqs_disabled(),
-			"Interrupts enabled after %pF\n", drv->resume);
-	}
-}
-
-/**
- *	sysdev_suspend - Suspend all system devices.
- *	@state:		Power state to enter.
- *
- *	We perform an almost identical operation as sysdev_shutdown()
- *	above, though calling ->suspend() instead. Interrupts are disabled
- *	when this called. Devices are responsible for both saving state and
- *	quiescing or powering down the device.
- *
- *	This is only called by the device PM core, so we let them handle
- *	all synchronization.
- */
-int sysdev_suspend(pm_message_t state)
-{
-	struct sysdev_class *cls;
-	struct sys_device *sysdev, *err_dev;
-	struct sysdev_driver *drv, *err_drv;
-	int ret;
-
-	pr_debug("Checking wake-up interrupts\n");
-
-	/* Return error code if there are any wake-up interrupts pending */
-	ret = check_wakeup_irqs();
-	if (ret)
-		return ret;
-
-	WARN_ONCE(!irqs_disabled(),
-		"Interrupts enabled while suspending system devices\n");
-
-	pr_debug("Suspending System Devices\n");
-
-	list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
-		pr_debug("Suspending type '%s':\n",
-			 kobject_name(&cls->kset.kobj));
-
-		list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
-			pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
-			/* Call auxillary drivers first */
-			list_for_each_entry(drv, &cls->drivers, entry) {
-				if (drv->suspend) {
-					ret = drv->suspend(sysdev, state);
-					if (ret)
-						goto aux_driver;
-				}
-				WARN_ONCE(!irqs_disabled(),
-					"Interrupts enabled after %pF\n",
-					drv->suspend);
-			}
-
-			/* Now call the generic one */
-			if (cls->suspend) {
-				ret = cls->suspend(sysdev, state);
-				if (ret)
-					goto cls_driver;
-				WARN_ONCE(!irqs_disabled(),
-					"Interrupts enabled after %pF\n",
-					cls->suspend);
-			}
-		}
-	}
-	return 0;
-	/* resume current sysdev */
-cls_driver:
-	drv = NULL;
-	printk(KERN_ERR "Class suspend failed for %s: %d\n",
-		kobject_name(&sysdev->kobj), ret);
-
-aux_driver:
-	if (drv)
-		printk(KERN_ERR "Class driver suspend failed for %s: %d\n",
-				kobject_name(&sysdev->kobj), ret);
-	list_for_each_entry(err_drv, &cls->drivers, entry) {
-		if (err_drv == drv)
-			break;
-		if (err_drv->resume)
-			err_drv->resume(sysdev);
-	}
-
-	/* resume other sysdevs in current class */
-	list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) {
-		if (err_dev == sysdev)
-			break;
-		pr_debug(" %s\n", kobject_name(&err_dev->kobj));
-		__sysdev_resume(err_dev);
-	}
-
-	/* resume other classes */
-	list_for_each_entry_continue(cls, &system_kset->list, kset.kobj.entry) {
-		list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) {
-			pr_debug(" %s\n", kobject_name(&err_dev->kobj));
-			__sysdev_resume(err_dev);
-		}
-	}
-	return ret;
-}
-EXPORT_SYMBOL_GPL(sysdev_suspend);
-
-/**
- *	sysdev_resume - Bring system devices back to life.
- *
- *	Similar to sysdev_suspend(), but we iterate the list forwards
- *	to guarantee that parent devices are resumed before their children.
- *
- *	Note: Interrupts are disabled when called.
- */
-int sysdev_resume(void)
-{
-	struct sysdev_class *cls;
-
-	WARN_ONCE(!irqs_disabled(),
-		"Interrupts enabled while resuming system devices\n");
-
-	pr_debug("Resuming System Devices\n");
-
-	list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) {
-		struct sys_device *sysdev;
-
-		pr_debug("Resuming type '%s':\n",
-			 kobject_name(&cls->kset.kobj));
-
-		list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
-			pr_debug(" %s\n", kobject_name(&sysdev->kobj));
-
-			__sysdev_resume(sysdev);
-		}
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(sysdev_resume);
-#endif /* CONFIG_ARCH_NO_SYSDEV_OPS */
+EXPORT_SYMBOL_GPL(sysdev_register);
+EXPORT_SYMBOL_GPL(sysdev_unregister);
 
 int __init system_bus_init(void)
 {
@@ -534,9 +339,6 @@ int __init system_bus_init(void)
 	return 0;
 }
 
-EXPORT_SYMBOL_GPL(sysdev_register);
-EXPORT_SYMBOL_GPL(sysdev_unregister);
-
 #define to_ext_attr(x) container_of(x, struct sysdev_ext_attribute, attr)
 
 ssize_t sysdev_store_ulong(struct sys_device *sysdev,
diff --git a/drivers/base/syscore.c b/drivers/base/syscore.c
index 90af2943f9e..c126db3cb7d 100644
--- a/drivers/base/syscore.c
+++ b/drivers/base/syscore.c
@@ -73,6 +73,7 @@ int syscore_suspend(void)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(syscore_suspend);
 
 /**
  * syscore_resume - Execute all the registered system core resume callbacks.
@@ -95,6 +96,7 @@ void syscore_resume(void)
 				"Interrupts enabled after %pF\n", ops->resume);
 		}
 }
+EXPORT_SYMBOL_GPL(syscore_resume);
 #endif /* CONFIG_PM_SLEEP */
 
 /**
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 79882104e43..e086fbbbe85 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -1790,7 +1790,7 @@ static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
   unsigned short LogicalDeviceNumber = 0;
   int ModelNameLength;
 
-  /* Get data into dma-able area, then copy into permanant location */
+  /* Get data into dma-able area, then copy into permanent location */
   if (!DAC960_V2_NewControllerInfo(Controller))
     return DAC960_Failure(Controller, "GET CONTROLLER INFO");
   memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
@@ -2547,7 +2547,6 @@ static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
 	disk->major = MajorNumber;
 	disk->first_minor = n << DAC960_MaxPartitionsBits;
 	disk->fops = &DAC960_BlockDeviceOperations;
-	disk->events = DISK_EVENT_MEDIA_CHANGE;
    }
   /*
     Indicate the Block Device Registration completed successfully,
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 456c0cc90dc..8eba86bba59 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1736,7 +1736,6 @@ static int __init fd_probe_drives(void)
 		disk->major = FLOPPY_MAJOR;
 		disk->first_minor = drive;
 		disk->fops = &floppy_fops;
-		disk->events = DISK_EVENT_MEDIA_CHANGE;
 		sprintf(disk->disk_name, "fd%d", drive);
 		disk->private_data = &unit[drive];
 		set_capacity(disk, 880*2);
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index c871eae1412..ede16c64ff0 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1964,7 +1964,6 @@ static int __init atari_floppy_init (void)
 		unit[i].disk->first_minor = i;
 		sprintf(unit[i].disk->disk_name, "fd%d", i);
 		unit[i].disk->fops = &floppy_fops;
-		unit[i].disk->events = DISK_EVENT_MEDIA_CHANGE;
 		unit[i].disk->private_data = &unit[i];
 		unit[i].disk->queue = blk_init_queue(do_fd_request,
 					&ataflop_lock);
diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c
index 2a1642bc451..c6828b68d77 100644
--- a/drivers/block/drbd/drbd_actlog.c
+++ b/drivers/block/drbd/drbd_actlog.c
@@ -30,7 +30,7 @@
 
 /* We maintain a trivial check sum in our on disk activity log.
  * With that we can ensure correct operation even when the storage
- * device might do a partial (last) sector write while loosing power.
+ * device might do a partial (last) sector write while losing power.
  */
 struct __packed al_transaction {
 	u32       magic;
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 81030d8d654..b2699bb2e53 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -622,7 +622,7 @@ DCBP_set_pad_bits(struct p_compressed_bm *p, int n)
 /* one bitmap packet, including the p_header,
  * should fit within one _architecture independend_ page.
  * so we need to use the fixed size 4KiB page size
- * most architechtures have used for a long time.
+ * most architectures have used for a long time.
  */
 #define BM_PACKET_PAYLOAD_BYTES (4096 - sizeof(struct p_header80))
 #define BM_PACKET_WORDS (BM_PACKET_PAYLOAD_BYTES/sizeof(long))
@@ -810,7 +810,7 @@ enum {
 
 /* global flag bits */
 enum {
-	CREATE_BARRIER,		/* next P_DATA is preceeded by a P_BARRIER */
+	CREATE_BARRIER,		/* next P_DATA is preceded by a P_BARRIER */
 	SIGNAL_ASENDER,		/* whether asender wants to be interrupted */
 	SEND_PING,		/* whether asender should send a ping asap */
 
@@ -1126,7 +1126,7 @@ struct drbd_conf {
 	int c_sync_rate; /* current resync rate after syncer throttle magic */
 	struct fifo_buffer rs_plan_s; /* correction values of resync planer */
 	int rs_in_flight; /* resync sectors in flight (to proxy, in proxy and from proxy) */
-	int rs_planed;    /* resync sectors already planed */
+	int rs_planed;    /* resync sectors already planned */
 	atomic_t ap_in_flight; /* App sectors in flight (waiting for ack) */
 };
 
@@ -1144,7 +1144,7 @@ static inline unsigned int mdev_to_minor(struct drbd_conf *mdev)
 	return mdev->minor;
 }
 
-/* returns 1 if it was successfull,
+/* returns 1 if it was successful,
  * returns 0 if there was no data socket.
  * so wherever you are going to use the data.socket, e.g. do
  * if (!drbd_get_data_sock(mdev))
@@ -2079,7 +2079,7 @@ static inline void inc_ap_pending(struct drbd_conf *mdev)
 /* counts how many resync-related answers we still expect from the peer
  *		     increase			decrease
  * C_SYNC_TARGET sends P_RS_DATA_REQUEST (and expects P_RS_DATA_REPLY)
- * C_SYNC_SOURCE sends P_RS_DATA_REPLY   (and expects P_WRITE_ACK whith ID_SYNCER)
+ * C_SYNC_SOURCE sends P_RS_DATA_REPLY   (and expects P_WRITE_ACK with ID_SYNCER)
  *					   (or P_NEG_ACK with ID_SYNCER)
  */
 static inline void inc_rs_pending(struct drbd_conf *mdev)
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index dfc85f32d31..5b525c179f3 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -1561,7 +1561,7 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 		if (drbd_send_state(mdev))
 			dev_warn(DEV, "Notified peer that I'm now diskless.\n");
 		/* corresponding get_ldev in __drbd_set_state
-		 * this may finaly trigger drbd_ldev_destroy. */
+		 * this may finally trigger drbd_ldev_destroy. */
 		put_ldev(mdev);
 	}
 
@@ -3706,7 +3706,7 @@ int drbd_md_read(struct drbd_conf *mdev, struct drbd_backing_dev *bdev)
 	buffer = (struct meta_data_on_disk *)page_address(mdev->md_io_page);
 
 	if (!drbd_md_sync_page_io(mdev, bdev, bdev->md.md_offset, READ)) {
-		/* NOTE: cant do normal error processing here as this is
+		/* NOTE: can't do normal error processing here as this is
 		   called BEFORE disk is attached */
 		dev_err(DEV, "Error while reading metadata.\n");
 		rv = ERR_IO_MD_DISK;
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index fe1564c7d8b..fd26666c0b0 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -862,7 +862,7 @@ retry:
 	msock->sk->sk_rcvtimeo = mdev->net_conf->ping_int*HZ;
 
 	/* we don't want delays.
-	 * we use TCP_CORK where apropriate, though */
+	 * we use TCP_CORK where appropriate, though */
 	drbd_tcp_nodelay(sock);
 	drbd_tcp_nodelay(msock);
 
diff --git a/drivers/block/drbd/drbd_vli.h b/drivers/block/drbd/drbd_vli.h
index fc824006e72..8cb1532a381 100644
--- a/drivers/block/drbd/drbd_vli.h
+++ b/drivers/block/drbd/drbd_vli.h
@@ -32,7 +32,7 @@
  * the bitmap transfer time can take much too long,
  * if transmitted in plain text.
  *
- * We try to reduce the transfered bitmap information
+ * We try to reduce the transferred bitmap information
  * by encoding runlengths of bit polarity.
  *
  * We never actually need to encode a "zero" (runlengths are positive).
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 301d7a9a41a..db8f88586c8 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4205,7 +4205,6 @@ static int __init floppy_init(void)
 		disks[dr]->major = FLOPPY_MAJOR;
 		disks[dr]->first_minor = TOMINOR(dr);
 		disks[dr]->fops = &floppy_fops;
-		disks[dr]->events = DISK_EVENT_MEDIA_CHANGE;
 		sprintf(disks[dr]->disk_name, "fd%d", dr);
 
 		init_timer(&motor_off_timer[dr]);
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index 30ec6b37424..007c630904c 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -733,7 +733,7 @@ static int __init hd_init(void)
 		 * the BIOS or CMOS.  This doesn't work all that well,
 		 * since this assumes that this is a primary or secondary
 		 * drive, and if we're using this legacy driver, it's
-		 * probably an auxilliary controller added to recover
+		 * probably an auxiliary controller added to recover
 		 * legacy data off an ST-506 drive.  Either way, it's
 		 * definitely safest to have the user explicitly specify
 		 * the information.
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index 2f2ccf68625..8690e31d993 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -320,7 +320,6 @@ static void pcd_init_units(void)
 		disk->first_minor = unit;
 		strcpy(disk->disk_name, cd->name);	/* umm... */
 		disk->fops = &pcd_bdops;
-		disk->events = DISK_EVENT_MEDIA_CHANGE;
 	}
 }
 
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
index 21dfdb77686..869e7676d46 100644
--- a/drivers/block/paride/pd.c
+++ b/drivers/block/paride/pd.c
@@ -837,7 +837,6 @@ static void pd_probe_drive(struct pd_unit *disk)
 	p->fops = &pd_fops;
 	p->major = major;
 	p->first_minor = (disk - pd) << PD_BITS;
-	p->events = DISK_EVENT_MEDIA_CHANGE;
 	disk->gd = p;
 	p->private_data = disk;
 	p->queue = pd_queue;
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
index 7adeb1edbf4..f21b520ef41 100644
--- a/drivers/block/paride/pf.c
+++ b/drivers/block/paride/pf.c
@@ -294,7 +294,6 @@ static void __init pf_init_units(void)
 		disk->first_minor = unit;
 		strcpy(disk->disk_name, pf->name);
 		disk->fops = &pf_fops;
-		disk->events = DISK_EVENT_MEDIA_CHANGE;
 		if (!(*drives[unit])[D_PRT])
 			pf_drive_count++;
 	}
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 16dc3645291..9712fad82bc 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -92,6 +92,8 @@ struct rbd_client {
 	struct list_head	node;
 };
 
+struct rbd_req_coll;
+
 /*
  * a single io request
  */
@@ -100,6 +102,24 @@ struct rbd_request {
 	struct bio		*bio;		/* cloned bio */
 	struct page		**pages;	/* list of used pages */
 	u64			len;
+	int			coll_index;
+	struct rbd_req_coll	*coll;
+};
+
+struct rbd_req_status {
+	int done;
+	int rc;
+	u64 bytes;
+};
+
+/*
+ * a collection of requests
+ */
+struct rbd_req_coll {
+	int			total;
+	int			num_done;
+	struct kref		kref;
+	struct rbd_req_status	status[0];
 };
 
 struct rbd_snap {
@@ -416,6 +436,17 @@ static void rbd_put_client(struct rbd_device *rbd_dev)
 	rbd_dev->client = NULL;
 }
 
+/*
+ * Destroy requests collection
+ */
+static void rbd_coll_release(struct kref *kref)
+{
+	struct rbd_req_coll *coll =
+		container_of(kref, struct rbd_req_coll, kref);
+
+	dout("rbd_coll_release %p\n", coll);
+	kfree(coll);
+}
 
 /*
  * Create a new header structure, translate header format from the on-disk
@@ -590,6 +621,14 @@ static u64 rbd_get_segment(struct rbd_image_header *header,
 	return len;
 }
 
+static int rbd_get_num_segments(struct rbd_image_header *header,
+				u64 ofs, u64 len)
+{
+	u64 start_seg = ofs >> header->obj_order;
+	u64 end_seg = (ofs + len - 1) >> header->obj_order;
+	return end_seg - start_seg + 1;
+}
+
 /*
  * bio helpers
  */
@@ -735,6 +774,50 @@ static void rbd_destroy_ops(struct ceph_osd_req_op *ops)
 	kfree(ops);
 }
 
+static void rbd_coll_end_req_index(struct request *rq,
+				   struct rbd_req_coll *coll,
+				   int index,
+				   int ret, u64 len)
+{
+	struct request_queue *q;
+	int min, max, i;
+
+	dout("rbd_coll_end_req_index %p index %d ret %d len %lld\n",
+	     coll, index, ret, len);
+
+	if (!rq)
+		return;
+
+	if (!coll) {
+		blk_end_request(rq, ret, len);
+		return;
+	}
+
+	q = rq->q;
+
+	spin_lock_irq(q->queue_lock);
+	coll->status[index].done = 1;
+	coll->status[index].rc = ret;
+	coll->status[index].bytes = len;
+	max = min = coll->num_done;
+	while (max < coll->total && coll->status[max].done)
+		max++;
+
+	for (i = min; i<max; i++) {
+		__blk_end_request(rq, coll->status[i].rc,
+				  coll->status[i].bytes);
+		coll->num_done++;
+		kref_put(&coll->kref, rbd_coll_release);
+	}
+	spin_unlock_irq(q->queue_lock);
+}
+
+static void rbd_coll_end_req(struct rbd_request *req,
+			     int ret, u64 len)
+{
+	rbd_coll_end_req_index(req->rq, req->coll, req->coll_index, ret, len);
+}
+
 /*
  * Send ceph osd request
  */
@@ -749,6 +832,8 @@ static int rbd_do_request(struct request *rq,
 			  int flags,
 			  struct ceph_osd_req_op *ops,
 			  int num_reply,
+			  struct rbd_req_coll *coll,
+			  int coll_index,
 			  void (*rbd_cb)(struct ceph_osd_request *req,
 					 struct ceph_msg *msg),
 			  struct ceph_osd_request **linger_req,
@@ -763,12 +848,20 @@ static int rbd_do_request(struct request *rq,
 	struct ceph_osd_request_head *reqhead;
 	struct rbd_image_header *header = &dev->header;
 
-	ret = -ENOMEM;
 	req_data = kzalloc(sizeof(*req_data), GFP_NOIO);
-	if (!req_data)
-		goto done;
+	if (!req_data) {
+		if (coll)
+			rbd_coll_end_req_index(rq, coll, coll_index,
+					       -ENOMEM, len);
+		return -ENOMEM;
+	}
 
-	dout("rbd_do_request len=%lld ofs=%lld\n", len, ofs);
+	if (coll) {
+		req_data->coll = coll;
+		req_data->coll_index = coll_index;
+	}
+
+	dout("rbd_do_request obj=%s ofs=%lld len=%lld\n", obj, len, ofs);
 
 	down_read(&header->snap_rwsem);
 
@@ -777,9 +870,9 @@ static int rbd_do_request(struct request *rq,
 				      ops,
 				      false,
 				      GFP_NOIO, pages, bio);
-	if (IS_ERR(req)) {
+	if (!req) {
 		up_read(&header->snap_rwsem);
-		ret = PTR_ERR(req);
+		ret = -ENOMEM;
 		goto done_pages;
 	}
 
@@ -828,7 +921,8 @@ static int rbd_do_request(struct request *rq,
 		ret = ceph_osdc_wait_request(&dev->client->osdc, req);
 		if (ver)
 			*ver = le64_to_cpu(req->r_reassert_version.version);
-		dout("reassert_ver=%lld\n", le64_to_cpu(req->r_reassert_version.version));
+		dout("reassert_ver=%lld\n",
+		     le64_to_cpu(req->r_reassert_version.version));
 		ceph_osdc_put_request(req);
 	}
 	return ret;
@@ -837,10 +931,8 @@ done_err:
 	bio_chain_put(req_data->bio);
 	ceph_osdc_put_request(req);
 done_pages:
+	rbd_coll_end_req(req_data, ret, len);
 	kfree(req_data);
-done:
-	if (rq)
-		blk_end_request(rq, ret, len);
 	return ret;
 }
 
@@ -874,7 +966,7 @@ static void rbd_req_cb(struct ceph_osd_request *req, struct ceph_msg *msg)
 		bytes = req_data->len;
 	}
 
-	blk_end_request(req_data->rq, rc, bytes);
+	rbd_coll_end_req(req_data, rc, bytes);
 
 	if (req_data->bio)
 		bio_chain_put(req_data->bio);
@@ -934,6 +1026,7 @@ static int rbd_req_sync_op(struct rbd_device *dev,
 			  flags,
 			  ops,
 			  2,
+			  NULL, 0,
 			  NULL,
 			  linger_req, ver);
 	if (ret < 0)
@@ -959,7 +1052,9 @@ static int rbd_do_op(struct request *rq,
 		     u64 snapid,
 		     int opcode, int flags, int num_reply,
 		     u64 ofs, u64 len,
-		     struct bio *bio)
+		     struct bio *bio,
+		     struct rbd_req_coll *coll,
+		     int coll_index)
 {
 	char *seg_name;
 	u64 seg_ofs;
@@ -995,7 +1090,10 @@ static int rbd_do_op(struct request *rq,
 			     flags,
 			     ops,
 			     num_reply,
+			     coll, coll_index,
 			     rbd_req_cb, 0, NULL);
+
+	rbd_destroy_ops(ops);
 done:
 	kfree(seg_name);
 	return ret;
@@ -1008,13 +1106,15 @@ static int rbd_req_write(struct request *rq,
 			 struct rbd_device *rbd_dev,
 			 struct ceph_snap_context *snapc,
 			 u64 ofs, u64 len,
-			 struct bio *bio)
+			 struct bio *bio,
+			 struct rbd_req_coll *coll,
+			 int coll_index)
 {
 	return rbd_do_op(rq, rbd_dev, snapc, CEPH_NOSNAP,
 			 CEPH_OSD_OP_WRITE,
 			 CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK,
 			 2,
-			 ofs, len, bio);
+			 ofs, len, bio, coll, coll_index);
 }
 
 /*
@@ -1024,14 +1124,16 @@ static int rbd_req_read(struct request *rq,
 			 struct rbd_device *rbd_dev,
 			 u64 snapid,
 			 u64 ofs, u64 len,
-			 struct bio *bio)
+			 struct bio *bio,
+			 struct rbd_req_coll *coll,
+			 int coll_index)
 {
 	return rbd_do_op(rq, rbd_dev, NULL,
 			 (snapid ? snapid : CEPH_NOSNAP),
 			 CEPH_OSD_OP_READ,
 			 CEPH_OSD_FLAG_READ,
 			 2,
-			 ofs, len, bio);
+			 ofs, len, bio, coll, coll_index);
 }
 
 /*
@@ -1063,7 +1165,9 @@ static int rbd_req_sync_notify_ack(struct rbd_device *dev,
 {
 	struct ceph_osd_req_op *ops;
 	struct page **pages = NULL;
-	int ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_NOTIFY_ACK, 0);
+	int ret;
+
+	ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_NOTIFY_ACK, 0);
 	if (ret < 0)
 		return ret;
 
@@ -1077,6 +1181,7 @@ static int rbd_req_sync_notify_ack(struct rbd_device *dev,
 			  CEPH_OSD_FLAG_READ,
 			  ops,
 			  1,
+			  NULL, 0,
 			  rbd_simple_req_cb, 0, NULL);
 
 	rbd_destroy_ops(ops);
@@ -1274,6 +1379,20 @@ static int rbd_req_sync_exec(struct rbd_device *dev,
 	return ret;
 }
 
+static struct rbd_req_coll *rbd_alloc_coll(int num_reqs)
+{
+	struct rbd_req_coll *coll =
+			kzalloc(sizeof(struct rbd_req_coll) +
+			        sizeof(struct rbd_req_status) * num_reqs,
+				GFP_ATOMIC);
+
+	if (!coll)
+		return NULL;
+	coll->total = num_reqs;
+	kref_init(&coll->kref);
+	return coll;
+}
+
 /*
  * block device queue callback
  */
@@ -1291,6 +1410,8 @@ static void rbd_rq_fn(struct request_queue *q)
 		bool do_write;
 		int size, op_size = 0;
 		u64 ofs;
+		int num_segs, cur_seg = 0;
+		struct rbd_req_coll *coll;
 
 		/* peek at request from block layer */
 		if (!rq)
@@ -1321,6 +1442,14 @@ static void rbd_rq_fn(struct request_queue *q)
 		     do_write ? "write" : "read",
 		     size, blk_rq_pos(rq) * 512ULL);
 
+		num_segs = rbd_get_num_segments(&rbd_dev->header, ofs, size);
+		coll = rbd_alloc_coll(num_segs);
+		if (!coll) {
+			spin_lock_irq(q->queue_lock);
+			__blk_end_request_all(rq, -ENOMEM);
+			goto next;
+		}
+
 		do {
 			/* a bio clone to be passed down to OSD req */
 			dout("rq->bio->bi_vcnt=%d\n", rq->bio->bi_vcnt);
@@ -1328,35 +1457,41 @@ static void rbd_rq_fn(struct request_queue *q)
 						  rbd_dev->header.block_name,
 						  ofs, size,
 						  NULL, NULL);
+			kref_get(&coll->kref);
 			bio = bio_chain_clone(&rq_bio, &next_bio, &bp,
 					      op_size, GFP_ATOMIC);
 			if (!bio) {
-				spin_lock_irq(q->queue_lock);
-				__blk_end_request_all(rq, -ENOMEM);
-				goto next;
+				rbd_coll_end_req_index(rq, coll, cur_seg,
+						       -ENOMEM, op_size);
+				goto next_seg;
 			}
 
+
 			/* init OSD command: write or read */
 			if (do_write)
 				rbd_req_write(rq, rbd_dev,
 					      rbd_dev->header.snapc,
 					      ofs,
-					      op_size, bio);
+					      op_size, bio,
+					      coll, cur_seg);
 			else
 				rbd_req_read(rq, rbd_dev,
 					     cur_snap_id(rbd_dev),
 					     ofs,
-					     op_size, bio);
+					     op_size, bio,
+					     coll, cur_seg);
 
+next_seg:
 			size -= op_size;
 			ofs += op_size;
 
+			cur_seg++;
 			rq_bio = next_bio;
 		} while (size > 0);
+		kref_put(&coll->kref, rbd_coll_release);
 
 		if (bp)
 			bio_pair_release(bp);
-
 		spin_lock_irq(q->queue_lock);
 next:
 		rq = blk_fetch_request(q);
diff --git a/drivers/block/swim.c b/drivers/block/swim.c
index 24a482f2fbd..fd5adcd5594 100644
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -858,7 +858,6 @@ static int __devinit swim_floppy_init(struct swim_priv *swd)
 		swd->unit[drive].disk->first_minor = drive;
 		sprintf(swd->unit[drive].disk->disk_name, "fd%d", drive);
 		swd->unit[drive].disk->fops = &floppy_fops;
-		swd->unit[drive].disk->events = DISK_EVENT_MEDIA_CHANGE;
 		swd->unit[drive].disk->private_data = &swd->unit[drive];
 		swd->unit[drive].disk->queue = swd->queue;
 		set_capacity(swd->unit[drive].disk, 2880);
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 4c10f56facb..773bfa79277 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1163,7 +1163,6 @@ static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device
 	disk->major = FLOPPY_MAJOR;
 	disk->first_minor = i;
 	disk->fops = &floppy_fops;
-	disk->events = DISK_EVENT_MEDIA_CHANGE;
 	disk->private_data = &floppy_states[i];
 	disk->queue = swim3_queue;
 	disk->flags |= GENHD_FL_REMOVABLE;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 68b9430c7cf..0e376d46bdd 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -2334,7 +2334,6 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
 	disk->major = UB_MAJOR;
 	disk->first_minor = lun->id * UB_PARTS_PER_LUN;
 	disk->fops = &ub_bd_fops;
-	disk->events = DISK_EVENT_MEDIA_CHANGE;
 	disk->private_data = lun;
 	disk->driverfs_dev = &sc->intf->dev;
 
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index e2ff697697c..9a5b2a2d616 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -94,7 +94,7 @@ static const struct vio_error_entry viodasd_err_table[] = {
 	{ 0x0204, EIO, "Use Error" },
 	{ 0x0205, EIO, "Release Error" },
 	{ 0x0206, EINVAL, "Invalid Disk" },
-	{ 0x0207, EBUSY, "Cant Lock" },
+	{ 0x0207, EBUSY, "Can't Lock" },
 	{ 0x0208, EIO, "Already Locked" },
 	{ 0x0209, EIO, "Already Unlocked" },
 	{ 0x020A, EIO, "Invalid Arg" },
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 73354b081ed..6c7fd7db6df 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -621,7 +621,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
 		ace_dump_mem(ace->cf_id, 512);	/* Debug: Dump out disk ID */
 
 		if (ace->data_result) {
-			/* Error occured, disable the disk */
+			/* Error occurred, disable the disk */
 			ace->media_change = 1;
 			set_capacity(ace->gd, 0);
 			dev_err(ace->dev, "error fetching CF id (%i)\n",
@@ -801,7 +801,7 @@ static int ace_interrupt_checkstate(struct ace_device *ace)
 	u32 sreg = ace_in32(ace, ACE_STATUS);
 	u16 creg = ace_in(ace, ACE_CTRL);
 
-	/* Check for error occurance */
+	/* Check for error occurrence */
 	if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) &&
 	    (creg & ACE_CTRL_ERRORIRQ)) {
 		dev_err(ace->dev, "transfer failure\n");
@@ -1005,7 +1005,6 @@ static int __devinit ace_setup(struct ace_device *ace)
 	ace->gd->major = ace_major;
 	ace->gd->first_minor = ace->id * ACE_NUM_MINORS;
 	ace->gd->fops = &ace_fops;
-	ace->gd->events = DISK_EVENT_MEDIA_CHANGE;
 	ace->gd->queue = ace->queue;
 	ace->gd->private_data = ace;
 	snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a');
@@ -1169,7 +1168,7 @@ static int __devinit ace_probe(struct platform_device *dev)
 			irq = dev->resource[i].start;
 	}
 
-	/* Call the bus-independant setup code */
+	/* Call the bus-independent setup code */
 	return ace_alloc(&dev->dev, id, physaddr, irq, bus_width);
 }
 
@@ -1222,7 +1221,7 @@ static int __devinit ace_of_probe(struct platform_device *op)
 	if (of_find_property(op->dev.of_node, "8-bit", NULL))
 		bus_width = ACE_BUS_WIDTH_8;
 
-	/* Call the bus-independant setup code */
+	/* Call the bus-independent setup code */
 	return ace_alloc(&op->dev, id ? be32_to_cpup(id) : 0,
 						physaddr, irq, bus_width);
 }
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index 38595e782d0..7e4b435f79f 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -207,7 +207,7 @@ static void ll_device_want_to_wakeup(struct hci_uart *hu)
 		/*
 		 * This state means that both the host and the BRF chip
 		 * have simultaneously sent a wake-up-indication packet.
-		 * Traditionaly, in this case, receiving a wake-up-indication
+		 * Traditionally, in this case, receiving a wake-up-indication
 		 * was enough and an additional wake-up-ack wasn't needed.
 		 * This has changed with the BRF6350, which does require an
 		 * explicit wake-up-ack. Other BRF versions, which do not
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index e2c48a7eccf..75fb965b8f7 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -30,7 +30,7 @@
   changelog for the 1.x series, David?
 
 2.00  Dec  2, 1997 -- Erik Andersen <andersee@debian.org>
-  -- New maintainer! As David A. van Leeuwen has been too busy to activly
+  -- New maintainer! As David A. van Leeuwen has been too busy to actively
   maintain and improve this driver, I am now carrying on the torch. If
   you have a problem with this driver, please feel free to contact me.
 
@@ -986,6 +986,9 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev, fmode_t
 
 	cdinfo(CD_OPEN, "entering cdrom_open\n"); 
 
+	/* open is event synchronization point, check events first */
+	check_disk_change(bdev);
+
 	/* if this was a O_NONBLOCK open and we should honor the flags,
 	 * do a quick open without drive/disc integrity checks. */
 	cdi->use_count++;
@@ -1012,9 +1015,6 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev, fmode_t
 
 	cdinfo(CD_OPEN, "Use count for \"/dev/%s\" now %d\n",
 			cdi->name, cdi->use_count);
-	/* Do this on open.  Don't wait for mount, because they might
-	    not be mounting, but opening with O_NONBLOCK */
-	check_disk_change(bdev);
 	return 0;
 err_release:
 	if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) {
@@ -2520,7 +2520,7 @@ static int cdrom_ioctl_drive_status(struct cdrom_device_info *cdi,
 /*
  * Ok, this is where problems start.  The current interface for the
  * CDROM_DISC_STATUS ioctl is flawed.  It makes the false assumption that
- * CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.  Unfortunatly, while this
+ * CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.  Unfortunately, while this
  * is often the case, it is also very common for CDs to have some tracks
  * with data, and some tracks with audio.  Just because I feel like it,
  * I declare the following to be the best way to cope.  If the CD has ANY
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index b2b034fea34..3ceaf006e7f 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -803,7 +803,6 @@ static int __devinit probe_gdrom(struct platform_device *devptr)
 		goto probe_fail_cdrom_register;
 	}
 	gd.disk->fops = &gdrom_bdops;
-	gd.disk->events = DISK_EVENT_MEDIA_CHANGE;
 	/* latch on to the interrupt */
 	err = gdrom_set_interrupt_handlers();
 	if (err)
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 4e874c5fa60..e427fbe4599 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -626,7 +626,6 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	gendisk->queue = q;
 	gendisk->fops = &viocd_fops;
 	gendisk->flags = GENHD_FL_CD|GENHD_FL_REMOVABLE;
-	gendisk->events = DISK_EVENT_MEDIA_CHANGE;
 	set_capacity(gendisk, 0);
 	gendisk->private_data = d;
 	d->viocd_disk = gendisk;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ad59b4e0a9b..49502bc5360 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -523,7 +523,7 @@ config RAW_DRIVER
           with the O_DIRECT flag.
 
 config MAX_RAW_DEVS
-	int "Maximum number of RAW devices to support (1-8192)"
+	int "Maximum number of RAW devices to support (1-65536)"
 	depends on RAW_DRIVER
 	default "256"
 	help
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 3e67ddde9e1..923f99df4f1 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -237,7 +237,7 @@ extern int agp_try_unsupported_boot;
 
 long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 
-/* Chipset independant registers (from AGP Spec) */
+/* Chipset independent registers (from AGP Spec) */
 #define AGP_APBASE	0x10
 
 #define AGPSTAT		0x4
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 45681c0ff3b..f7e88787af9 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -272,7 +272,7 @@ static void amd_irongate_cleanup(void)
  * This routine could be implemented by taking the addresses
  * written to the GATT, and flushing them individually.  However
  * currently it just flushes the whole table.  Which is probably
- * more efficent, since agp_memory blocks can be a large number of
+ * more efficient, since agp_memory blocks can be a large number of
  * entries.
  */
 
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 012cba0d6d9..b072648dc3f 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -115,6 +115,9 @@ static struct agp_memory *agp_create_user_memory(unsigned long num_agp_pages)
 	struct agp_memory *new;
 	unsigned long alloc_size = num_agp_pages*sizeof(struct page *);
 
+	if (INT_MAX/sizeof(struct page *) < num_agp_pages)
+		return NULL;
+
 	new = kzalloc(sizeof(struct agp_memory), GFP_KERNEL);
 	if (new == NULL)
 		return NULL;
@@ -234,11 +237,14 @@ struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge,
 	int scratch_pages;
 	struct agp_memory *new;
 	size_t i;
+	int cur_memory;
 
 	if (!bridge)
 		return NULL;
 
-	if ((atomic_read(&bridge->current_memory_agp) + page_count) > bridge->max_memory_agp)
+	cur_memory = atomic_read(&bridge->current_memory_agp);
+	if ((cur_memory + page_count > bridge->max_memory_agp) ||
+	    (cur_memory + page_count < page_count))
 		return NULL;
 
 	if (type >= AGP_USER_TYPES) {
@@ -1089,8 +1095,8 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type)
 		return -EINVAL;
 	}
 
-	/* AK: could wrap */
-	if ((pg_start + mem->page_count) > num_entries)
+	if (((pg_start + mem->page_count) > num_entries) ||
+	    ((pg_start + mem->page_count) < pg_start))
 		return -EINVAL;
 
 	j = pg_start;
@@ -1124,7 +1130,7 @@ int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
 {
 	size_t i;
 	struct agp_bridge_data *bridge;
-	int mask_type;
+	int mask_type, num_entries;
 
 	bridge = mem->bridge;
 	if (!bridge)
@@ -1136,6 +1142,11 @@ int agp_generic_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
 	if (type != mem->type)
 		return -EINVAL;
 
+	num_entries = agp_num_entries();
+	if (((pg_start + mem->page_count) > num_entries) ||
+	    ((pg_start + mem->page_count) < pg_start))
+		return -EINVAL;
+
 	mask_type = bridge->driver->agp_type_to_mask_type(bridge, type);
 	if (mask_type != 0) {
 		/* The generic routines know nothing of memory types */
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 13acaaf64ed..f02f9b07fd4 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -229,7 +229,7 @@ static int serverworks_fetch_size(void)
  * This routine could be implemented by taking the addresses
  * written to the GATT, and flushing them individually.  However
  * currently it just flushes the whole table.  Which is probably
- * more efficent, since agp_memory blocks can be a large number of
+ * more efficient, since agp_memory blocks can be a large number of
  * entries.
  */
 static void serverworks_tlbflush(struct agp_memory *temp)
diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c
index df67e80019d..8bc38493740 100644
--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@@ -400,7 +400,7 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata =
 	 * the traditional AGP which resides only in chipset. AGP is used
 	 * by 3D driver which wasn't available for the VT3336 and VT3364
 	 * generation until now.  Unfortunately, by testing, VT3364 works
-	 * but VT3336 doesn't. - explaination from via, just leave this as
+	 * but VT3336 doesn't. - explanation from via, just leave this as
 	 * as a placeholder to avoid future patches adding it back in.
 	 */
 #if 0
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index a4a6c2f044b..cf39bc08ce0 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -295,7 +295,7 @@ static int bsr_create_devs(struct device_node *bn)
 static int __init bsr_init(void)
 {
 	struct device_node *np;
-	dev_t bsr_dev = MKDEV(bsr_major, 0);
+	dev_t bsr_dev;
 	int ret = -ENODEV;
 	int result;
 
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 7066e801b9d..051474c65b7 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -84,8 +84,6 @@ static struct clocksource clocksource_hpet = {
 	.rating		= 250,
 	.read		= read_hpet,
 	.mask		= CLOCKSOURCE_MASK(64),
-	.mult		= 0,		/* to be calculated */
-	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 static struct clocksource *hpet_clocksource;
@@ -934,9 +932,7 @@ int hpet_alloc(struct hpet_data *hdp)
 	if (!hpet_clocksource) {
 		hpet_mctr = (void __iomem *)&hpetp->hp_hpet->hpet_mc;
 		CLKSRC_FSYS_MMIO_SET(clocksource_hpet.fsys_mmio, hpet_mctr);
-		clocksource_hpet.mult = clocksource_hz2mult(hpetp->hp_tick_freq,
-						clocksource_hpet.shift);
-		clocksource_register(&clocksource_hpet);
+		clocksource_register_hz(&clocksource_hpet, hpetp->hp_tick_freq);
 		hpetp->hp_clocksource = &clocksource_hpet;
 		hpet_clocksource = &clocksource_hpet;
 	}
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 43ac61978d8..ac6739e085e 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -619,15 +619,18 @@ static void __devinit n2rng_driver_version(void)
 		pr_info("%s", version);
 }
 
+static const struct of_device_id n2rng_match[];
 static int __devinit n2rng_probe(struct platform_device *op)
 {
+	const struct of_device_id *match;
 	int victoria_falls;
 	int err = -ENOMEM;
 	struct n2rng *np;
 
-	if (!op->dev.of_match)
+	match = of_match_device(n2rng_match, &op->dev);
+	if (!match)
 		return -EINVAL;
-	victoria_falls = (op->dev.of_match->data != NULL);
+	victoria_falls = (match->data != NULL);
 
 	n2rng_driver_version();
 	np = kzalloc(sizeof(*np), GFP_KERNEL);
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
index 0dec5da000e..2efa176beab 100644
--- a/drivers/char/ipmi/ipmi_poweroff.c
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -122,7 +122,7 @@ static struct ipmi_recv_msg halt_recv_msg = {
 
 
 /*
- * Code to send a message and wait for the reponse.
+ * Code to send a message and wait for the response.
  */
 
 static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index d28b484aee4..64c6b853061 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -339,7 +339,7 @@ static void return_hosed_msg(struct smi_info *smi_info, int cCode)
 		cCode = IPMI_ERR_UNSPECIFIED;
 	/* else use it as is */
 
-	/* Make it a reponse */
+	/* Make it a response */
 	msg->rsp[0] = msg->data[0] | 4;
 	msg->rsp[1] = msg->data[1];
 	msg->rsp[2] = cCode;
@@ -2554,9 +2554,11 @@ static struct pci_driver ipmi_pci_driver = {
 };
 #endif /* CONFIG_PCI */
 
+static struct of_device_id ipmi_match[];
 static int __devinit ipmi_probe(struct platform_device *dev)
 {
 #ifdef CONFIG_OF
+	const struct of_device_id *match;
 	struct smi_info *info;
 	struct resource resource;
 	const __be32 *regsize, *regspacing, *regshift;
@@ -2566,7 +2568,8 @@ static int __devinit ipmi_probe(struct platform_device *dev)
 
 	dev_info(&dev->dev, "probing via device tree\n");
 
-	if (!dev->dev.of_match)
+	match = of_match_device(ipmi_match, &dev->dev);
+	if (!match)
 		return -EINVAL;
 
 	ret = of_address_to_resource(np, 0, &resource);
@@ -2601,7 +2604,7 @@ static int __devinit ipmi_probe(struct platform_device *dev)
 		return -ENOMEM;
 	}
 
-	info->si_type		= (enum si_type) dev->dev.of_match->data;
+	info->si_type		= (enum si_type) match->data;
 	info->addr_source	= SI_DEVICETREE;
 	info->irq_setup		= std_irq_setup;
 
@@ -2927,7 +2930,7 @@ static void return_hosed_msg_badsize(struct smi_info *smi_info)
 {
 	struct ipmi_smi_msg *msg = smi_info->curr_msg;
 
-	/* Make it a reponse */
+	/* Make it a response */
 	msg->rsp[0] = msg->data[0] | 4;
 	msg->rsp[1] = msg->data[1];
 	msg->rsp[2] = CANNOT_RETURN_REQUESTED_LENGTH;
diff --git a/drivers/char/mbcs.h b/drivers/char/mbcs.h
index ba671589f4c..1a36884c48b 100644
--- a/drivers/char/mbcs.h
+++ b/drivers/char/mbcs.h
@@ -36,13 +36,13 @@
 #define MBCS_RD_DMA_CTRL	0x0110	/* Read DMA Control */
 #define MBCS_RD_DMA_AMO_DEST	0x0118	/* Read DMA AMO Destination */
 #define MBCS_RD_DMA_INT_DEST	0x0120	/* Read DMA Interrupt Destination */
-#define MBCS_RD_DMA_AUX_STAT	0x0130	/* Read DMA Auxillary Status */
+#define MBCS_RD_DMA_AUX_STAT	0x0130	/* Read DMA Auxiliary Status */
 #define MBCS_WR_DMA_SYS_ADDR	0x0200	/* Write DMA System Address */
 #define MBCS_WR_DMA_LOC_ADDR	0x0208	/* Write DMA Local Address */
 #define MBCS_WR_DMA_CTRL	0x0210	/* Write DMA Control */
 #define MBCS_WR_DMA_AMO_DEST	0x0218	/* Write DMA AMO Destination */
 #define MBCS_WR_DMA_INT_DEST	0x0220	/* Write DMA Interrupt Destination */
-#define MBCS_WR_DMA_AUX_STAT	0x0230	/* Write DMA Auxillary Status */
+#define MBCS_WR_DMA_AUX_STAT	0x0230	/* Write DMA Auxiliary Status */
 #define MBCS_ALG_AMO_DEST	0x0300	/* Algorithm AMO Destination */
 #define MBCS_ALG_INT_DEST	0x0308	/* Algorithm Interrupt Destination */
 #define MBCS_ALG_OFFSETS	0x0310
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 436a9901799..8fc04b4f311 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -806,29 +806,41 @@ static const struct file_operations oldmem_fops = {
 };
 #endif
 
-static ssize_t kmsg_write(struct file *file, const char __user *buf,
-			  size_t count, loff_t *ppos)
+static ssize_t kmsg_writev(struct kiocb *iocb, const struct iovec *iv,
+			   unsigned long count, loff_t pos)
 {
-	char *tmp;
-	ssize_t ret;
+	char *line, *p;
+	int i;
+	ssize_t ret = -EFAULT;
+	size_t len = iov_length(iv, count);
 
-	tmp = kmalloc(count + 1, GFP_KERNEL);
-	if (tmp == NULL)
+	line = kmalloc(len + 1, GFP_KERNEL);
+	if (line == NULL)
 		return -ENOMEM;
-	ret = -EFAULT;
-	if (!copy_from_user(tmp, buf, count)) {
-		tmp[count] = 0;
-		ret = printk("%s", tmp);
-		if (ret > count)
-			/* printk can add a prefix */
-			ret = count;
+
+	/*
+	 * copy all vectors into a single string, to ensure we do
+	 * not interleave our log line with other printk calls
+	 */
+	p = line;
+	for (i = 0; i < count; i++) {
+		if (copy_from_user(p, iv[i].iov_base, iv[i].iov_len))
+			goto out;
+		p += iv[i].iov_len;
 	}
-	kfree(tmp);
+	p[0] = '\0';
+
+	ret = printk("%s", line);
+	/* printk can add a prefix */
+	if (ret > len)
+		ret = len;
+out:
+	kfree(line);
 	return ret;
 }
 
 static const struct file_operations kmsg_fops = {
-	.write = kmsg_write,
+	.aio_write = kmsg_writev,
 	.llseek = noop_llseek,
 };
 
diff --git a/drivers/char/mwave/3780i.h b/drivers/char/mwave/3780i.h
index 270431ca7da..fba6ab1160c 100644
--- a/drivers/char/mwave/3780i.h
+++ b/drivers/char/mwave/3780i.h
@@ -122,7 +122,7 @@ typedef struct {
 typedef struct {
 	unsigned char Dma:3;	/* RW: DMA channel selection */
 	unsigned char NumTransfers:2;	/* RW: Maximum # of transfers once being granted the ISA bus */
-	unsigned char ReRequest:2;	/* RW: Minumum delay between releasing the ISA bus and requesting it again */
+	unsigned char ReRequest:2;	/* RW: Minimum delay between releasing the ISA bus and requesting it again */
 	unsigned char MEMCS16:1;	/* RW: ISA signal MEMCS16: 0=disabled, 1=enabled */
 } DSP_BUSMASTER_CFG_1;
 
diff --git a/drivers/char/nwbutton.c b/drivers/char/nwbutton.c
index 8994ce32e6c..04a480f86c6 100644
--- a/drivers/char/nwbutton.c
+++ b/drivers/char/nwbutton.c
@@ -75,7 +75,7 @@ int button_add_callback (void (*callback) (void), int count)
  * with -EINVAL. If there is more than one entry with the same address,
  * because it searches the list from end to beginning, it will unregister the
  * last one to be registered first (FILO- First In Last Out).
- * Note that this is not neccessarily true if the entries are not submitted
+ * Note that this is not necessarily true if the entries are not submitted
  * at the same time, because another driver could have unregistered a callback
  * between the submissions creating a gap earlier in the list, which would
  * be filled first at submission time.
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index bcbbc71febb..90bd01671c7 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -806,7 +806,7 @@ static void monitor_card(unsigned long p)
 		dev->flags1 = 0x01;
 		xoutb(dev->flags1, REG_FLAGS1(iobase));
 
-		/* atr is present (which doesnt mean it's valid) */
+		/* atr is present (which doesn't mean it's valid) */
 		set_bit(IS_ATR_PRESENT, &dev->flags);
 		if (dev->atr[0] == 0x03)
 			str_invert_revert(dev->atr, dev->atr_len);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index beca80bb9bd..b575411c69b 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1290,7 +1290,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
 	/* Allocate and claim adapter resources */
 	retval = claim_resources(info);
 
-	/* perform existance check and diagnostics */
+	/* perform existence check and diagnostics */
 	if ( !retval )
 		retval = adapter_test(info);
 
@@ -2680,7 +2680,7 @@ static void rx_free_buffers(MGSLPC_INFO *info)
 static int claim_resources(MGSLPC_INFO *info)
 {
 	if (rx_alloc_buffers(info) < 0 ) {
-		printk( "Cant allocate rx buffer %s\n", info->device_name);
+		printk( "Can't allocate rx buffer %s\n", info->device_name);
 		release_resources(info);
 		return -ENODEV;
 	}
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 5e29e8031bb..d4ddeba5668 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -732,7 +732,7 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf,
 			       size_t nbytes, int min, int rsvd);
 
 /*
- * This utility inline function is responsible for transfering entropy
+ * This utility inline function is responsible for transferring entropy
  * from the primary pool to the secondary extraction pool. We make
  * sure we pull enough for a 'catastrophic reseed'.
  */
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index b4b9d5a4788..b33e8ea314e 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -21,6 +21,7 @@
 #include <linux/mutex.h>
 #include <linux/gfp.h>
 #include <linux/compat.h>
+#include <linux/vmalloc.h>
 
 #include <asm/uaccess.h>
 
@@ -30,10 +31,15 @@ struct raw_device_data {
 };
 
 static struct class *raw_class;
-static struct raw_device_data raw_devices[MAX_RAW_MINORS];
+static struct raw_device_data *raw_devices;
 static DEFINE_MUTEX(raw_mutex);
 static const struct file_operations raw_ctl_fops; /* forward declaration */
 
+static int max_raw_minors = MAX_RAW_MINORS;
+
+module_param(max_raw_minors, int, 0);
+MODULE_PARM_DESC(max_raw_minors, "Maximum number of raw devices (1-65536)");
+
 /*
  * Open/close code for raw IO.
  *
@@ -125,7 +131,7 @@ static int bind_set(int number, u64 major, u64 minor)
 	struct raw_device_data *rawdev;
 	int err = 0;
 
-	if (number <= 0 || number >= MAX_RAW_MINORS)
+	if (number <= 0 || number >= max_raw_minors)
 		return -EINVAL;
 
 	if (MAJOR(dev) != major || MINOR(dev) != minor)
@@ -312,14 +318,27 @@ static int __init raw_init(void)
 	dev_t dev = MKDEV(RAW_MAJOR, 0);
 	int ret;
 
-	ret = register_chrdev_region(dev, MAX_RAW_MINORS, "raw");
+	if (max_raw_minors < 1 || max_raw_minors > 65536) {
+		printk(KERN_WARNING "raw: invalid max_raw_minors (must be"
+			" between 1 and 65536), using %d\n", MAX_RAW_MINORS);
+		max_raw_minors = MAX_RAW_MINORS;
+	}
+
+	raw_devices = vmalloc(sizeof(struct raw_device_data) * max_raw_minors);
+	if (!raw_devices) {
+		printk(KERN_ERR "Not enough memory for raw device structures\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+	memset(raw_devices, 0, sizeof(struct raw_device_data) * max_raw_minors);
+
+	ret = register_chrdev_region(dev, max_raw_minors, "raw");
 	if (ret)
 		goto error;
 
 	cdev_init(&raw_cdev, &raw_fops);
-	ret = cdev_add(&raw_cdev, dev, MAX_RAW_MINORS);
+	ret = cdev_add(&raw_cdev, dev, max_raw_minors);
 	if (ret) {
-		kobject_put(&raw_cdev.kobj);
 		goto error_region;
 	}
 
@@ -336,8 +355,9 @@ static int __init raw_init(void)
 	return 0;
 
 error_region:
-	unregister_chrdev_region(dev, MAX_RAW_MINORS);
+	unregister_chrdev_region(dev, max_raw_minors);
 error:
+	vfree(raw_devices);
 	return ret;
 }
 
@@ -346,7 +366,7 @@ static void __exit raw_exit(void)
 	device_destroy(raw_class, MKDEV(RAW_MAJOR, 0));
 	class_destroy(raw_class);
 	cdev_del(&raw_cdev);
-	unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), MAX_RAW_MINORS);
+	unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), max_raw_minors);
 }
 
 module_init(raw_init);
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 79e36c878a4..1ee8ce7d276 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1241,7 +1241,7 @@ static int __devinit sonypi_setup_ioports(struct sonypi_device *dev,
 	while (check_ioport && check->port1) {
 		if (!request_region(check->port1,
 				   sonypi_device.region_size,
-				   "Sony Programable I/O Device Check")) {
+				   "Sony Programmable I/O Device Check")) {
 			printk(KERN_ERR "sonypi: ioport 0x%.4x busy, using sony-laptop? "
 					"if not use check_ioport=0\n",
 					check->port1);
@@ -1255,7 +1255,7 @@ static int __devinit sonypi_setup_ioports(struct sonypi_device *dev,
 
 		if (request_region(ioport_list->port1,
 				   sonypi_device.region_size,
-				   "Sony Programable I/O Device")) {
+				   "Sony Programmable I/O Device")) {
 			dev->ioport1 = ioport_list->port1;
 			dev->ioport2 = ioport_list->port2;
 			return 0;
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 84b164d1eb2..838568a7dbf 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1280,18 +1280,7 @@ static void unplug_port(struct port *port)
 		spin_lock_irq(&pdrvdata_lock);
 		list_del(&port->cons.list);
 		spin_unlock_irq(&pdrvdata_lock);
-#if 0
-		/*
-		 * hvc_remove() not called as removing one hvc port
-		 * results in other hvc ports getting frozen.
-		 *
-		 * Once this is resolved in hvc, this functionality
-		 * will be enabled.  Till that is done, the -EPIPE
-		 * return from get_chars() above will help
-		 * hvc_console.c to clean up on ports we remove here.
-		 */
 		hvc_remove(port->cons.hvc);
-#endif
 	}
 
 	/* Remove unused data this port might have received. */
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d3c9d755ed9..39ccdeada79 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -67,7 +67,7 @@
  * cp foo.bit /dev/icap0
  *
  * Note that unless foo.bit is an appropriately constructed partial
- * bitstream, this has a high likelyhood of overwriting the design
+ * bitstream, this has a high likelihood of overwriting the design
  * currently programmed in the FPGA.
  */
 
@@ -715,13 +715,13 @@ static int __devexit hwicap_remove(struct device *dev)
 }
 
 #ifdef CONFIG_OF
-static int __devinit hwicap_of_probe(struct platform_device *op)
+static int __devinit hwicap_of_probe(struct platform_device *op,
+				     const struct hwicap_driver_config *config)
 {
 	struct resource res;
 	const unsigned int *id;
 	const char *family;
 	int rc;
-	const struct hwicap_driver_config *config = op->dev.of_match->data;
 	const struct config_registers *regs;
 
 
@@ -751,20 +751,24 @@ static int __devinit hwicap_of_probe(struct platform_device *op)
 			regs);
 }
 #else
-static inline int hwicap_of_probe(struct platform_device *op)
+static inline int hwicap_of_probe(struct platform_device *op,
+				  const struct hwicap_driver_config *config)
 {
 	return -EINVAL;
 }
 #endif /* CONFIG_OF */
 
+static const struct of_device_id __devinitconst hwicap_of_match[];
 static int __devinit hwicap_drv_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *match;
 	struct resource *res;
 	const struct config_registers *regs;
 	const char *family;
 
-	if (pdev->dev.of_match)
-		return hwicap_of_probe(pdev);
+	match = of_match_device(hwicap_of_match, &pdev->dev);
+	if (match)
+		return hwicap_of_probe(pdev, match->data);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
index 0fc0a79852d..6db161f64ae 100644
--- a/drivers/clk/clkdev.c
+++ b/drivers/clk/clkdev.c
@@ -32,10 +32,9 @@ static DEFINE_MUTEX(clocks_mutex);
  * Then we take the most specific entry - with the following
  * order of precedence: dev+con > dev only > con only.
  */
-static struct clk *clk_find(const char *dev_id, const char *con_id)
+static struct clk_lookup *clk_find(const char *dev_id, const char *con_id)
 {
-	struct clk_lookup *p;
-	struct clk *clk = NULL;
+	struct clk_lookup *p, *cl = NULL;
 	int match, best = 0;
 
 	list_for_each_entry(p, &clocks, node) {
@@ -52,27 +51,27 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
 		}
 
 		if (match > best) {
-			clk = p->clk;
+			cl = p;
 			if (match != 3)
 				best = match;
 			else
 				break;
 		}
 	}
-	return clk;
+	return cl;
 }
 
 struct clk *clk_get_sys(const char *dev_id, const char *con_id)
 {
-	struct clk *clk;
+	struct clk_lookup *cl;
 
 	mutex_lock(&clocks_mutex);
-	clk = clk_find(dev_id, con_id);
-	if (clk && !__clk_get(clk))
-		clk = NULL;
+	cl = clk_find(dev_id, con_id);
+	if (cl && !__clk_get(cl->clk))
+		cl = NULL;
 	mutex_unlock(&clocks_mutex);
 
-	return clk ? clk : ERR_PTR(-ENOENT);
+	return cl ? cl->clk : ERR_PTR(-ENOENT);
 }
 EXPORT_SYMBOL(clk_get_sys);
 
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
new file mode 100644
index 00000000000..110aeeb52f9
--- /dev/null
+++ b/drivers/clocksource/Kconfig
@@ -0,0 +1,2 @@
+config CLKSRC_I8253
+	bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index be61ece6330..cfb6383b543 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC)	+= cs5535-clockevt.o
 obj-$(CONFIG_SH_TIMER_CMT)	+= sh_cmt.o
 obj-$(CONFIG_SH_TIMER_MTU2)	+= sh_mtu2.o
 obj-$(CONFIG_SH_TIMER_TMU)	+= sh_tmu.o
+obj-$(CONFIG_CLKSRC_I8253)	+= i8253.o
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 64e528e8bfa..72f811f73e9 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -29,8 +29,6 @@ static struct clocksource clocksource_cyclone = {
 	.rating		= 250,
 	.read		= read_cyclone,
 	.mask		= CYCLONE_TIMER_MASK,
-	.mult		= 10,
-	.shift		= 0,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -108,12 +106,8 @@ static int __init init_cyclone_clocksource(void)
 	}
 	cyclone_ptr = cyclone_timer;
 
-	/* sort out mult/shift values: */
-	clocksource_cyclone.shift = 22;
-	clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ,
-						clocksource_cyclone.shift);
-
-	return clocksource_register(&clocksource_cyclone);
+	return clocksource_register_hz(&clocksource_cyclone,
+					CYCLONE_TIMER_FREQ);
 }
 
 arch_initcall(init_cyclone_clocksource);
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
new file mode 100644
index 00000000000..225c1761b37
--- /dev/null
+++ b/drivers/clocksource/i8253.c
@@ -0,0 +1,88 @@
+/*
+ * i8253 PIT clocksource
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/timex.h>
+
+#include <asm/i8253.h>
+
+/*
+ * Since the PIT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t i8253_read(struct clocksource *cs)
+{
+	static int old_count;
+	static u32 old_jifs;
+	unsigned long flags;
+	int count;
+	u32 jifs;
+
+	raw_spin_lock_irqsave(&i8253_lock, flags);
+	/*
+	 * Although our caller may have the read side of xtime_lock,
+	 * this is now a seqlock, and we are cheating in this routine
+	 * by having side effects on state that we cannot undo if
+	 * there is a collision on the seqlock and our caller has to
+	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
+	 * jiffies as volatile despite the lock.  We read jiffies
+	 * before latching the timer count to guarantee that although
+	 * the jiffies value might be older than the count (that is,
+	 * the counter may underflow between the last point where
+	 * jiffies was incremented and the point where we latch the
+	 * count), it cannot be newer.
+	 */
+	jifs = jiffies;
+	outb_pit(0x00, PIT_MODE);	/* latch the count ASAP */
+	count = inb_pit(PIT_CH0);	/* read the latched count */
+	count |= inb_pit(PIT_CH0) << 8;
+
+	/* VIA686a test code... reset the latch if count > max + 1 */
+	if (count > LATCH) {
+		outb_pit(0x34, PIT_MODE);
+		outb_pit(PIT_LATCH & 0xff, PIT_CH0);
+		outb_pit(PIT_LATCH >> 8, PIT_CH0);
+		count = PIT_LATCH - 1;
+	}
+
+	/*
+	 * It's possible for count to appear to go the wrong way for a
+	 * couple of reasons:
+	 *
+	 *  1. The timer counter underflows, but we haven't handled the
+	 *     resulting interrupt and incremented jiffies yet.
+	 *  2. Hardware problem with the timer, not giving us continuous time,
+	 *     the counter does small "jumps" upwards on some Pentium systems,
+	 *     (see c't 95/10 page 335 for Neptun bug.)
+	 *
+	 * Previous attempts to handle these cases intelligently were
+	 * buggy, so we just do the simple thing now.
+	 */
+	if (count > old_count && jifs == old_jifs)
+		count = old_count;
+
+	old_count = count;
+	old_jifs = jifs;
+
+	raw_spin_unlock_irqrestore(&i8253_lock, flags);
+
+	count = (PIT_LATCH - 1) - count;
+
+	return (cycle_t)(jifs * PIT_LATCH) + count;
+}
+
+static struct clocksource i8253_cs = {
+	.name		= "pit",
+	.rating		= 110,
+	.read		= i8253_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+};
+
+int __init clocksource_i8253_init(void)
+{
+	return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
+}
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index d77005849af..219d88a0eea 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -142,6 +142,7 @@ static int cn_call_callback(struct sk_buff *skb)
 		cbq->callback(msg, nsp);
 		kfree_skb(skb);
 		cn_queue_release_callback(cbq);
+		err = 0;
 	}
 
 	return err;
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index ca8ee8093d6..9fb84853d8e 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -1,3 +1,5 @@
+menu "CPU Frequency scaling"
+
 config CPU_FREQ
 	bool "CPU Frequency scaling"
 	help
@@ -18,19 +20,6 @@ if CPU_FREQ
 config CPU_FREQ_TABLE
 	tristate
 
-config CPU_FREQ_DEBUG
-	bool "Enable CPUfreq debugging"
-	help
-	  Say Y here to enable CPUfreq subsystem (including drivers)
-	  debugging. You will need to activate it via the kernel
-	  command line by passing
-	     cpufreq.debug=<value>
-
-	  To get <value>, add 
-	       1 to activate CPUfreq core debugging,
-	       2 to activate CPUfreq drivers debugging, and
-	       4 to activate CPUfreq governor debugging
-
 config CPU_FREQ_STAT
 	tristate "CPU frequency translation statistics"
 	select CPU_FREQ_TABLE
@@ -190,4 +179,10 @@ config CPU_FREQ_GOV_CONSERVATIVE
 
 	  If in doubt, say N.
 
-endif	# CPU_FREQ
+menu "x86 CPU frequency scaling drivers"
+depends on X86
+source "drivers/cpufreq/Kconfig.x86"
+endmenu
+
+endif
+endmenu
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/drivers/cpufreq/Kconfig.x86
index 870e6cc6ad2..78ff7ee4895 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig.x86
@@ -1,15 +1,7 @@
 #
-# CPU Frequency scaling
+# x86 CPU Frequency scaling drivers
 #
 
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
 config X86_PCC_CPUFREQ
 	tristate "Processor Clocking Control interface driver"
 	depends on ACPI && ACPI_PROCESSOR
@@ -43,7 +35,7 @@ config X86_ACPI_CPUFREQ
 config ELAN_CPUFREQ
 	tristate "AMD Elan SC400 and SC410"
 	select CPU_FREQ_TABLE
-	depends on X86_ELAN
+	depends on MELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
 	  processors.
@@ -59,7 +51,7 @@ config ELAN_CPUFREQ
 config SC520_CPUFREQ
 	tristate "AMD Elan SC520"
 	select CPU_FREQ_TABLE
-	depends on X86_ELAN
+	depends on MELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC520 processor.
 
@@ -261,6 +253,3 @@ config X86_SPEEDSTEP_RELAXED_CAP_CHECK
 	  option lets the probing code bypass some of those checks if the
 	  parameter "relaxed_check=1" is passed to the module.
 
-endif	# CPU_FREQ
-
-endmenu
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 71fc3b4173f..c7f1a6f16b6 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,3 +13,29 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
 # CPUfreq cross-arch helpers
 obj-$(CONFIG_CPU_FREQ_TABLE)		+= freq_table.o
 
+##################################################################################d
+# x86 drivers.
+# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
+# K8 systems. ACPI is preferred to all other hardware-specific drivers.
+# speedstep-* is preferred over p4-clockmod.
+
+obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o mperf.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o mperf.o
+obj-$(CONFIG_X86_PCC_CPUFREQ)		+= pcc-cpufreq.o
+obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
+obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
+obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
+obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
+obj-$(CONFIG_X86_LONGRUN)		+= longrun.o
+obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
+obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
+obj-$(CONFIG_X86_SPEEDSTEP_LIB)		+= speedstep-lib.o
+obj-$(CONFIG_X86_SPEEDSTEP_SMI)		+= speedstep-smi.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
+obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
+obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
+
+##################################################################################d
+
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index a2baafb2fe6..4e04e127438 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -47,9 +47,6 @@
 #include <asm/cpufeature.h>
 #include "mperf.h"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"acpi-cpufreq", msg)
-
 MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
 MODULE_DESCRIPTION("ACPI Processor P-States Driver");
 MODULE_LICENSE("GPL");
@@ -233,7 +230,7 @@ static u32 get_cur_val(const struct cpumask *mask)
 	cmd.mask = mask;
 	drv_read(&cmd);
 
-	dprintk("get_cur_val = %u\n", cmd.val);
+	pr_debug("get_cur_val = %u\n", cmd.val);
 
 	return cmd.val;
 }
@@ -244,7 +241,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 	unsigned int freq;
 	unsigned int cached_freq;
 
-	dprintk("get_cur_freq_on_cpu (%d)\n", cpu);
+	pr_debug("get_cur_freq_on_cpu (%d)\n", cpu);
 
 	if (unlikely(data == NULL ||
 		     data->acpi_data == NULL || data->freq_table == NULL)) {
@@ -261,7 +258,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 		data->resume = 1;
 	}
 
-	dprintk("cur freq = %u\n", freq);
+	pr_debug("cur freq = %u\n", freq);
 
 	return freq;
 }
@@ -293,7 +290,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	unsigned int i;
 	int result = 0;
 
-	dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
+	pr_debug("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
 
 	if (unlikely(data == NULL ||
 	     data->acpi_data == NULL || data->freq_table == NULL)) {
@@ -313,11 +310,11 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	next_perf_state = data->freq_table[next_state].index;
 	if (perf->state == next_perf_state) {
 		if (unlikely(data->resume)) {
-			dprintk("Called after resume, resetting to P%d\n",
+			pr_debug("Called after resume, resetting to P%d\n",
 				next_perf_state);
 			data->resume = 0;
 		} else {
-			dprintk("Already at target state (P%d)\n",
+			pr_debug("Already at target state (P%d)\n",
 				next_perf_state);
 			goto out;
 		}
@@ -357,7 +354,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 	if (acpi_pstate_strict) {
 		if (!check_freqs(cmd.mask, freqs.new, data)) {
-			dprintk("acpi_cpufreq_target failed (%d)\n",
+			pr_debug("acpi_cpufreq_target failed (%d)\n",
 				policy->cpu);
 			result = -EAGAIN;
 			goto out;
@@ -378,7 +375,7 @@ static int acpi_cpufreq_verify(struct cpufreq_policy *policy)
 {
 	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
 
-	dprintk("acpi_cpufreq_verify\n");
+	pr_debug("acpi_cpufreq_verify\n");
 
 	return cpufreq_frequency_table_verify(policy, data->freq_table);
 }
@@ -433,11 +430,11 @@ static void free_acpi_perf_data(void)
 static int __init acpi_cpufreq_early_init(void)
 {
 	unsigned int i;
-	dprintk("acpi_cpufreq_early_init\n");
+	pr_debug("acpi_cpufreq_early_init\n");
 
 	acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
 	if (!acpi_perf_data) {
-		dprintk("Memory allocation error for acpi_perf_data.\n");
+		pr_debug("Memory allocation error for acpi_perf_data.\n");
 		return -ENOMEM;
 	}
 	for_each_possible_cpu(i) {
@@ -519,7 +516,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	static int blacklisted;
 #endif
 
-	dprintk("acpi_cpufreq_cpu_init\n");
+	pr_debug("acpi_cpufreq_cpu_init\n");
 
 #ifdef CONFIG_SMP
 	if (blacklisted)
@@ -566,7 +563,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	/* capability check */
 	if (perf->state_count <= 1) {
-		dprintk("No P-States\n");
+		pr_debug("No P-States\n");
 		result = -ENODEV;
 		goto err_unreg;
 	}
@@ -578,11 +575,11 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	switch (perf->control_register.space_id) {
 	case ACPI_ADR_SPACE_SYSTEM_IO:
-		dprintk("SYSTEM IO addr space\n");
+		pr_debug("SYSTEM IO addr space\n");
 		data->cpu_feature = SYSTEM_IO_CAPABLE;
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		dprintk("HARDWARE addr space\n");
+		pr_debug("HARDWARE addr space\n");
 		if (!check_est_cpu(cpu)) {
 			result = -ENODEV;
 			goto err_unreg;
@@ -590,7 +587,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE;
 		break;
 	default:
-		dprintk("Unknown addr space %d\n",
+		pr_debug("Unknown addr space %d\n",
 			(u32) (perf->control_register.space_id));
 		result = -ENODEV;
 		goto err_unreg;
@@ -661,9 +658,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (cpu_has(c, X86_FEATURE_APERFMPERF))
 		acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf;
 
-	dprintk("CPU%u - ACPI performance management activated.\n", cpu);
+	pr_debug("CPU%u - ACPI performance management activated.\n", cpu);
 	for (i = 0; i < perf->state_count; i++)
-		dprintk("     %cP%d: %d MHz, %d mW, %d uS\n",
+		pr_debug("     %cP%d: %d MHz, %d mW, %d uS\n",
 			(i == perf->state ? '*' : ' '), i,
 			(u32) perf->states[i].core_frequency,
 			(u32) perf->states[i].power,
@@ -694,7 +691,7 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
 	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
 
-	dprintk("acpi_cpufreq_cpu_exit\n");
+	pr_debug("acpi_cpufreq_cpu_exit\n");
 
 	if (data) {
 		cpufreq_frequency_table_put_attr(policy->cpu);
@@ -712,7 +709,7 @@ static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
 {
 	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
 
-	dprintk("acpi_cpufreq_resume\n");
+	pr_debug("acpi_cpufreq_resume\n");
 
 	data->resume = 1;
 
@@ -743,7 +740,7 @@ static int __init acpi_cpufreq_init(void)
 	if (acpi_disabled)
 		return 0;
 
-	dprintk("acpi_cpufreq_init\n");
+	pr_debug("acpi_cpufreq_init\n");
 
 	ret = acpi_cpufreq_early_init();
 	if (ret)
@@ -758,7 +755,7 @@ static int __init acpi_cpufreq_init(void)
 
 static void __exit acpi_cpufreq_exit(void)
 {
-	dprintk("acpi_cpufreq_exit\n");
+	pr_debug("acpi_cpufreq_exit\n");
 
 	cpufreq_unregister_driver(&acpi_cpufreq_driver);
 
diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
index 141abebc451..7bac808804f 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -57,8 +57,6 @@ MODULE_PARM_DESC(min_fsb,
 		"Minimum FSB to use, if not defined: current FSB - 50");
 
 #define PFX "cpufreq-nforce2: "
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"cpufreq-nforce2", msg)
 
 /**
  * nforce2_calc_fsb - calculate FSB
@@ -270,7 +268,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
 	if (freqs.old == freqs.new)
 		return 0;
 
-	dprintk("Old CPU frequency %d kHz, new %d kHz\n",
+	pr_debug("Old CPU frequency %d kHz, new %d kHz\n",
 	       freqs.old, freqs.new);
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
@@ -282,7 +280,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
 		printk(KERN_ERR PFX "Changing FSB to %d failed\n",
 			target_fsb);
 	else
-		dprintk("Changed FSB successfully to %d\n",
+		pr_debug("Changed FSB successfully to %d\n",
 			target_fsb);
 
 	/* Enable IRQs */
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b03771d4787..0a5bea9e358 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -32,9 +32,6 @@
 
 #include <trace/events/power.h>
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
-						"cpufreq-core", msg)
-
 /**
  * The "cpufreq driver" - the arch- or hardware-dependent low
  * level driver of CPUFreq support, and its spinlock. This lock
@@ -181,93 +178,6 @@ EXPORT_SYMBOL_GPL(cpufreq_cpu_put);
 
 
 /*********************************************************************
- *                     UNIFIED DEBUG HELPERS                         *
- *********************************************************************/
-#ifdef CONFIG_CPU_FREQ_DEBUG
-
-/* what part(s) of the CPUfreq subsystem are debugged? */
-static unsigned int debug;
-
-/* is the debug output ratelimit'ed using printk_ratelimit? User can
- * set or modify this value.
- */
-static unsigned int debug_ratelimit = 1;
-
-/* is the printk_ratelimit'ing enabled? It's enabled after a successful
- * loading of a cpufreq driver, temporarily disabled when a new policy
- * is set, and disabled upon cpufreq driver removal
- */
-static unsigned int disable_ratelimit = 1;
-static DEFINE_SPINLOCK(disable_ratelimit_lock);
-
-static void cpufreq_debug_enable_ratelimit(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&disable_ratelimit_lock, flags);
-	if (disable_ratelimit)
-		disable_ratelimit--;
-	spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-}
-
-static void cpufreq_debug_disable_ratelimit(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&disable_ratelimit_lock, flags);
-	disable_ratelimit++;
-	spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-}
-
-void cpufreq_debug_printk(unsigned int type, const char *prefix,
-			const char *fmt, ...)
-{
-	char s[256];
-	va_list args;
-	unsigned int len;
-	unsigned long flags;
-
-	WARN_ON(!prefix);
-	if (type & debug) {
-		spin_lock_irqsave(&disable_ratelimit_lock, flags);
-		if (!disable_ratelimit && debug_ratelimit
-					&& !printk_ratelimit()) {
-			spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-			return;
-		}
-		spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
-
-		len = snprintf(s, 256, KERN_DEBUG "%s: ", prefix);
-
-		va_start(args, fmt);
-		len += vsnprintf(&s[len], (256 - len), fmt, args);
-		va_end(args);
-
-		printk(s);
-
-		WARN_ON(len < 5);
-	}
-}
-EXPORT_SYMBOL(cpufreq_debug_printk);
-
-
-module_param(debug, uint, 0644);
-MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core,"
-			" 2 to debug drivers, and 4 to debug governors.");
-
-module_param(debug_ratelimit, uint, 0644);
-MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging:"
-					" set to 0 to disable ratelimiting.");
-
-#else /* !CONFIG_CPU_FREQ_DEBUG */
-
-static inline void cpufreq_debug_enable_ratelimit(void) { return; }
-static inline void cpufreq_debug_disable_ratelimit(void) { return; }
-
-#endif /* CONFIG_CPU_FREQ_DEBUG */
-
-
-/*********************************************************************
  *            EXTERNALLY AFFECTING FREQUENCY CHANGES                 *
  *********************************************************************/
 
@@ -291,7 +201,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 	if (!l_p_j_ref_freq) {
 		l_p_j_ref = loops_per_jiffy;
 		l_p_j_ref_freq = ci->old;
-		dprintk("saving %lu as reference value for loops_per_jiffy; "
+		pr_debug("saving %lu as reference value for loops_per_jiffy; "
 			"freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
 	}
 	if ((val == CPUFREQ_PRECHANGE  && ci->old < ci->new) ||
@@ -299,7 +209,7 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 	    (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
 		loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
 								ci->new);
-		dprintk("scaling loops_per_jiffy to %lu "
+		pr_debug("scaling loops_per_jiffy to %lu "
 			"for frequency %u kHz\n", loops_per_jiffy, ci->new);
 	}
 }
@@ -326,7 +236,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 	BUG_ON(irqs_disabled());
 
 	freqs->flags = cpufreq_driver->flags;
-	dprintk("notification %u of frequency transition to %u kHz\n",
+	pr_debug("notification %u of frequency transition to %u kHz\n",
 		state, freqs->new);
 
 	policy = per_cpu(cpufreq_cpu_data, freqs->cpu);
@@ -340,7 +250,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
 			if ((policy) && (policy->cpu == freqs->cpu) &&
 			    (policy->cur) && (policy->cur != freqs->old)) {
-				dprintk("Warning: CPU frequency is"
+				pr_debug("Warning: CPU frequency is"
 					" %u, cpufreq assumed %u kHz.\n",
 					freqs->old, policy->cur);
 				freqs->old = policy->cur;
@@ -353,7 +263,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 
 	case CPUFREQ_POSTCHANGE:
 		adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
-		dprintk("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
+		pr_debug("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
 			(unsigned long)freqs->cpu);
 		trace_power_frequency(POWER_PSTATE, freqs->new, freqs->cpu);
 		trace_cpu_frequency(freqs->new, freqs->cpu);
@@ -411,21 +321,14 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
 		t = __find_governor(str_governor);
 
 		if (t == NULL) {
-			char *name = kasprintf(GFP_KERNEL, "cpufreq_%s",
-								str_governor);
-
-			if (name) {
-				int ret;
+			int ret;
 
-				mutex_unlock(&cpufreq_governor_mutex);
-				ret = request_module("%s", name);
-				mutex_lock(&cpufreq_governor_mutex);
+			mutex_unlock(&cpufreq_governor_mutex);
+			ret = request_module("cpufreq_%s", str_governor);
+			mutex_lock(&cpufreq_governor_mutex);
 
-				if (ret == 0)
-					t = __find_governor(str_governor);
-			}
-
-			kfree(name);
+			if (ret == 0)
+				t = __find_governor(str_governor);
 		}
 
 		if (t != NULL) {
@@ -753,7 +656,7 @@ no_policy:
 static void cpufreq_sysfs_release(struct kobject *kobj)
 {
 	struct cpufreq_policy *policy = to_policy(kobj);
-	dprintk("last reference is dropped\n");
+	pr_debug("last reference is dropped\n");
 	complete(&policy->kobj_unregister);
 }
 
@@ -788,7 +691,7 @@ static int cpufreq_add_dev_policy(unsigned int cpu,
 	gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu));
 	if (gov) {
 		policy->governor = gov;
-		dprintk("Restoring governor %s for cpu %d\n",
+		pr_debug("Restoring governor %s for cpu %d\n",
 		       policy->governor->name, cpu);
 	}
 #endif
@@ -824,7 +727,7 @@ static int cpufreq_add_dev_policy(unsigned int cpu,
 			per_cpu(cpufreq_cpu_data, cpu) = managed_policy;
 			spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
-			dprintk("CPU already managed, adding link\n");
+			pr_debug("CPU already managed, adding link\n");
 			ret = sysfs_create_link(&sys_dev->kobj,
 						&managed_policy->kobj,
 						"cpufreq");
@@ -865,7 +768,7 @@ static int cpufreq_add_dev_symlink(unsigned int cpu,
 		if (!cpu_online(j))
 			continue;
 
-		dprintk("CPU %u already managed, adding link\n", j);
+		pr_debug("CPU %u already managed, adding link\n", j);
 		managed_policy = cpufreq_cpu_get(cpu);
 		cpu_sys_dev = get_cpu_sysdev(j);
 		ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
@@ -941,7 +844,7 @@ static int cpufreq_add_dev_interface(unsigned int cpu,
 	policy->user_policy.governor = policy->governor;
 
 	if (ret) {
-		dprintk("setting policy failed\n");
+		pr_debug("setting policy failed\n");
 		if (cpufreq_driver->exit)
 			cpufreq_driver->exit(policy);
 	}
@@ -977,8 +880,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	if (cpu_is_offline(cpu))
 		return 0;
 
-	cpufreq_debug_disable_ratelimit();
-	dprintk("adding CPU %u\n", cpu);
+	pr_debug("adding CPU %u\n", cpu);
 
 #ifdef CONFIG_SMP
 	/* check whether a different CPU already registered this
@@ -986,7 +888,6 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	policy = cpufreq_cpu_get(cpu);
 	if (unlikely(policy)) {
 		cpufreq_cpu_put(policy);
-		cpufreq_debug_enable_ratelimit();
 		return 0;
 	}
 #endif
@@ -1037,7 +938,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	 */
 	ret = cpufreq_driver->init(policy);
 	if (ret) {
-		dprintk("initialization failed\n");
+		pr_debug("initialization failed\n");
 		goto err_unlock_policy;
 	}
 	policy->user_policy.min = policy->min;
@@ -1063,8 +964,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 
 	kobject_uevent(&policy->kobj, KOBJ_ADD);
 	module_put(cpufreq_driver->owner);
-	dprintk("initialization complete\n");
-	cpufreq_debug_enable_ratelimit();
+	pr_debug("initialization complete\n");
 
 	return 0;
 
@@ -1088,7 +988,6 @@ err_free_policy:
 nomem_out:
 	module_put(cpufreq_driver->owner);
 module_out:
-	cpufreq_debug_enable_ratelimit();
 	return ret;
 }
 
@@ -1112,15 +1011,13 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	unsigned int j;
 #endif
 
-	cpufreq_debug_disable_ratelimit();
-	dprintk("unregistering CPU %u\n", cpu);
+	pr_debug("unregistering CPU %u\n", cpu);
 
 	spin_lock_irqsave(&cpufreq_driver_lock, flags);
 	data = per_cpu(cpufreq_cpu_data, cpu);
 
 	if (!data) {
 		spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
-		cpufreq_debug_enable_ratelimit();
 		unlock_policy_rwsem_write(cpu);
 		return -EINVAL;
 	}
@@ -1132,12 +1029,11 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	 * only need to unlink, put and exit
 	 */
 	if (unlikely(cpu != data->cpu)) {
-		dprintk("removing link\n");
+		pr_debug("removing link\n");
 		cpumask_clear_cpu(cpu, data->cpus);
 		spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 		kobj = &sys_dev->kobj;
 		cpufreq_cpu_put(data);
-		cpufreq_debug_enable_ratelimit();
 		unlock_policy_rwsem_write(cpu);
 		sysfs_remove_link(kobj, "cpufreq");
 		return 0;
@@ -1170,7 +1066,7 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 		for_each_cpu(j, data->cpus) {
 			if (j == cpu)
 				continue;
-			dprintk("removing link for cpu %u\n", j);
+			pr_debug("removing link for cpu %u\n", j);
 #ifdef CONFIG_HOTPLUG_CPU
 			strncpy(per_cpu(cpufreq_cpu_governor, j),
 				data->governor->name, CPUFREQ_NAME_LEN);
@@ -1199,21 +1095,35 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	 * not referenced anymore by anybody before we proceed with
 	 * unloading.
 	 */
-	dprintk("waiting for dropping of refcount\n");
+	pr_debug("waiting for dropping of refcount\n");
 	wait_for_completion(cmp);
-	dprintk("wait complete\n");
+	pr_debug("wait complete\n");
 
 	lock_policy_rwsem_write(cpu);
 	if (cpufreq_driver->exit)
 		cpufreq_driver->exit(data);
 	unlock_policy_rwsem_write(cpu);
 
+#ifdef CONFIG_HOTPLUG_CPU
+	/* when the CPU which is the parent of the kobj is hotplugged
+	 * offline, check for siblings, and create cpufreq sysfs interface
+	 * and symlinks
+	 */
+	if (unlikely(cpumask_weight(data->cpus) > 1)) {
+		/* first sibling now owns the new sysfs dir */
+		cpumask_clear_cpu(cpu, data->cpus);
+		cpufreq_add_dev(get_cpu_sysdev(cpumask_first(data->cpus)));
+
+		/* finally remove our own symlink */
+		lock_policy_rwsem_write(cpu);
+		__cpufreq_remove_dev(sys_dev);
+	}
+#endif
+
 	free_cpumask_var(data->related_cpus);
 	free_cpumask_var(data->cpus);
 	kfree(data);
-	per_cpu(cpufreq_cpu_data, cpu) = NULL;
 
-	cpufreq_debug_enable_ratelimit();
 	return 0;
 }
 
@@ -1239,7 +1149,7 @@ static void handle_update(struct work_struct *work)
 	struct cpufreq_policy *policy =
 		container_of(work, struct cpufreq_policy, update);
 	unsigned int cpu = policy->cpu;
-	dprintk("handle_update for cpu %u called\n", cpu);
+	pr_debug("handle_update for cpu %u called\n", cpu);
 	cpufreq_update_policy(cpu);
 }
 
@@ -1257,7 +1167,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
 {
 	struct cpufreq_freqs freqs;
 
-	dprintk("Warning: CPU frequency out of sync: cpufreq and timing "
+	pr_debug("Warning: CPU frequency out of sync: cpufreq and timing "
 	       "core thinks of %u, is %u kHz.\n", old_freq, new_freq);
 
 	freqs.cpu = cpu;
@@ -1360,7 +1270,7 @@ static int cpufreq_bp_suspend(void)
 	int cpu = smp_processor_id();
 	struct cpufreq_policy *cpu_policy;
 
-	dprintk("suspending cpu %u\n", cpu);
+	pr_debug("suspending cpu %u\n", cpu);
 
 	/* If there's no policy for the boot CPU, we have nothing to do. */
 	cpu_policy = cpufreq_cpu_get(cpu);
@@ -1398,7 +1308,7 @@ static void cpufreq_bp_resume(void)
 	int cpu = smp_processor_id();
 	struct cpufreq_policy *cpu_policy;
 
-	dprintk("resuming cpu %u\n", cpu);
+	pr_debug("resuming cpu %u\n", cpu);
 
 	/* If there's no policy for the boot CPU, we have nothing to do. */
 	cpu_policy = cpufreq_cpu_get(cpu);
@@ -1510,7 +1420,7 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 {
 	int retval = -EINVAL;
 
-	dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
+	pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
 		target_freq, relation);
 	if (cpu_online(policy->cpu) && cpufreq_driver->target)
 		retval = cpufreq_driver->target(policy, target_freq, relation);
@@ -1596,7 +1506,7 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
 	if (!try_module_get(policy->governor->owner))
 		return -EINVAL;
 
-	dprintk("__cpufreq_governor for CPU %u, event %u\n",
+	pr_debug("__cpufreq_governor for CPU %u, event %u\n",
 						policy->cpu, event);
 	ret = policy->governor->governor(policy, event);
 
@@ -1697,8 +1607,7 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 {
 	int ret = 0;
 
-	cpufreq_debug_disable_ratelimit();
-	dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
+	pr_debug("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
 		policy->min, policy->max);
 
 	memcpy(&policy->cpuinfo, &data->cpuinfo,
@@ -1735,19 +1644,19 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 	data->min = policy->min;
 	data->max = policy->max;
 
-	dprintk("new min and max freqs are %u - %u kHz\n",
+	pr_debug("new min and max freqs are %u - %u kHz\n",
 					data->min, data->max);
 
 	if (cpufreq_driver->setpolicy) {
 		data->policy = policy->policy;
-		dprintk("setting range\n");
+		pr_debug("setting range\n");
 		ret = cpufreq_driver->setpolicy(policy);
 	} else {
 		if (policy->governor != data->governor) {
 			/* save old, working values */
 			struct cpufreq_governor *old_gov = data->governor;
 
-			dprintk("governor switch\n");
+			pr_debug("governor switch\n");
 
 			/* end old governor */
 			if (data->governor)
@@ -1757,7 +1666,7 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 			data->governor = policy->governor;
 			if (__cpufreq_governor(data, CPUFREQ_GOV_START)) {
 				/* new governor failed, so re-start old one */
-				dprintk("starting governor %s failed\n",
+				pr_debug("starting governor %s failed\n",
 							data->governor->name);
 				if (old_gov) {
 					data->governor = old_gov;
@@ -1769,12 +1678,11 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 			}
 			/* might be a policy change, too, so fall through */
 		}
-		dprintk("governor: change or update limits\n");
+		pr_debug("governor: change or update limits\n");
 		__cpufreq_governor(data, CPUFREQ_GOV_LIMITS);
 	}
 
 error_out:
-	cpufreq_debug_enable_ratelimit();
 	return ret;
 }
 
@@ -1782,7 +1690,7 @@ error_out:
  *	cpufreq_update_policy - re-evaluate an existing cpufreq policy
  *	@cpu: CPU which shall be re-evaluated
  *
- *	Usefull for policy notifiers which have different necessities
+ *	Useful for policy notifiers which have different necessities
  *	at different times.
  */
 int cpufreq_update_policy(unsigned int cpu)
@@ -1801,7 +1709,7 @@ int cpufreq_update_policy(unsigned int cpu)
 		goto fail;
 	}
 
-	dprintk("updating policy for CPU %u\n", cpu);
+	pr_debug("updating policy for CPU %u\n", cpu);
 	memcpy(&policy, data, sizeof(struct cpufreq_policy));
 	policy.min = data->user_policy.min;
 	policy.max = data->user_policy.max;
@@ -1813,7 +1721,7 @@ int cpufreq_update_policy(unsigned int cpu)
 	if (cpufreq_driver->get) {
 		policy.cur = cpufreq_driver->get(cpu);
 		if (!data->cur) {
-			dprintk("Driver did not initialize current freq");
+			pr_debug("Driver did not initialize current freq");
 			data->cur = policy.cur;
 		} else {
 			if (data->cur != policy.cur)
@@ -1889,7 +1797,7 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 	    ((!driver_data->setpolicy) && (!driver_data->target)))
 		return -EINVAL;
 
-	dprintk("trying to register driver %s\n", driver_data->name);
+	pr_debug("trying to register driver %s\n", driver_data->name);
 
 	if (driver_data->setpolicy)
 		driver_data->flags |= CPUFREQ_CONST_LOOPS;
@@ -1920,15 +1828,14 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 
 		/* if all ->init() calls failed, unregister */
 		if (ret) {
-			dprintk("no CPU initialized for driver %s\n",
+			pr_debug("no CPU initialized for driver %s\n",
 							driver_data->name);
 			goto err_sysdev_unreg;
 		}
 	}
 
 	register_hotcpu_notifier(&cpufreq_cpu_notifier);
-	dprintk("driver %s up and running\n", driver_data->name);
-	cpufreq_debug_enable_ratelimit();
+	pr_debug("driver %s up and running\n", driver_data->name);
 
 	return 0;
 err_sysdev_unreg:
@@ -1955,14 +1862,10 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
 {
 	unsigned long flags;
 
-	cpufreq_debug_disable_ratelimit();
-
-	if (!cpufreq_driver || (driver != cpufreq_driver)) {
-		cpufreq_debug_enable_ratelimit();
+	if (!cpufreq_driver || (driver != cpufreq_driver))
 		return -EINVAL;
-	}
 
-	dprintk("unregistering driver %s\n", driver->name);
+	pr_debug("unregistering driver %s\n", driver->name);
 
 	sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
 	unregister_hotcpu_notifier(&cpufreq_cpu_notifier);
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index 7e2e515087f..f13a8a9af6a 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -15,9 +15,6 @@
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
-
 
 static int cpufreq_governor_performance(struct cpufreq_policy *policy,
 					unsigned int event)
@@ -25,7 +22,7 @@ static int cpufreq_governor_performance(struct cpufreq_policy *policy,
 	switch (event) {
 	case CPUFREQ_GOV_START:
 	case CPUFREQ_GOV_LIMITS:
-		dprintk("setting to %u kHz because of event %u\n",
+		pr_debug("setting to %u kHz because of event %u\n",
 						policy->max, event);
 		__cpufreq_driver_target(policy, policy->max,
 						CPUFREQ_RELATION_H);
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index e6db5faf3eb..4c2eb512f2b 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -15,16 +15,13 @@
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
-
 static int cpufreq_governor_powersave(struct cpufreq_policy *policy,
 					unsigned int event)
 {
 	switch (event) {
 	case CPUFREQ_GOV_START:
 	case CPUFREQ_GOV_LIMITS:
-		dprintk("setting to %u kHz because of event %u\n",
+		pr_debug("setting to %u kHz because of event %u\n",
 							policy->min, event);
 		__cpufreq_driver_target(policy, policy->min,
 						CPUFREQ_RELATION_L);
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 00d73fc8e4e..b60a4c26368 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -165,17 +165,27 @@ static int freq_table_get_index(struct cpufreq_stats *stat, unsigned int freq)
 	return -1;
 }
 
+/* should be called late in the CPU removal sequence so that the stats
+ * memory is still available in case someone tries to use it.
+ */
 static void cpufreq_stats_free_table(unsigned int cpu)
 {
 	struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
-	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-	if (policy && policy->cpu == cpu)
-		sysfs_remove_group(&policy->kobj, &stats_attr_group);
 	if (stat) {
 		kfree(stat->time_in_state);
 		kfree(stat);
 	}
 	per_cpu(cpufreq_stats_table, cpu) = NULL;
+}
+
+/* must be called early in the CPU removal sequence (before
+ * cpufreq_remove_dev) so that policy is still valid.
+ */
+static void cpufreq_stats_free_sysfs(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	if (policy && policy->cpu == cpu)
+		sysfs_remove_group(&policy->kobj, &stats_attr_group);
 	if (policy)
 		cpufreq_cpu_put(policy);
 }
@@ -316,6 +326,9 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb,
 	case CPU_ONLINE_FROZEN:
 		cpufreq_update_policy(cpu);
 		break;
+	case CPU_DOWN_PREPARE:
+		cpufreq_stats_free_sysfs(cpu);
+		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		cpufreq_stats_free_table(cpu);
@@ -324,9 +337,10 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block cpufreq_stat_cpu_notifier __refdata =
-{
+/* priority=1 so this will get called before cpufreq_remove_dev */
+static struct notifier_block cpufreq_stat_cpu_notifier __refdata = {
 	.notifier_call = cpufreq_stat_cpu_callback,
+	.priority = 1,
 };
 
 static struct notifier_block notifier_policy_block = {
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index 66d2d1d6c80..f231015904c 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -37,9 +37,6 @@ static DEFINE_PER_CPU(unsigned int, cpu_is_managed);
 static DEFINE_MUTEX(userspace_mutex);
 static int cpus_using_userspace_governor;
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
-
 /* keep track of frequency transitions */
 static int
 userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
@@ -50,7 +47,7 @@ userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 	if (!per_cpu(cpu_is_managed, freq->cpu))
 		return 0;
 
-	dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n",
+	pr_debug("saving cpu_cur_freq of cpu %u to be %u kHz\n",
 			freq->cpu, freq->new);
 	per_cpu(cpu_cur_freq, freq->cpu) = freq->new;
 
@@ -73,7 +70,7 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
 {
 	int ret = -EINVAL;
 
-	dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
+	pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
 
 	mutex_lock(&userspace_mutex);
 	if (!per_cpu(cpu_is_managed, policy->cpu))
@@ -134,7 +131,7 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 		per_cpu(cpu_max_freq, cpu) = policy->max;
 		per_cpu(cpu_cur_freq, cpu) = policy->cur;
 		per_cpu(cpu_set_freq, cpu) = policy->cur;
-		dprintk("managing cpu %u started "
+		pr_debug("managing cpu %u started "
 			"(%u - %u kHz, currently %u kHz)\n",
 				cpu,
 				per_cpu(cpu_min_freq, cpu),
@@ -156,12 +153,12 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 		per_cpu(cpu_min_freq, cpu) = 0;
 		per_cpu(cpu_max_freq, cpu) = 0;
 		per_cpu(cpu_set_freq, cpu) = 0;
-		dprintk("managing cpu %u stopped\n", cpu);
+		pr_debug("managing cpu %u stopped\n", cpu);
 		mutex_unlock(&userspace_mutex);
 		break;
 	case CPUFREQ_GOV_LIMITS:
 		mutex_lock(&userspace_mutex);
-		dprintk("limit event for cpu %u: %u - %u kHz, "
+		pr_debug("limit event for cpu %u: %u - %u kHz, "
 			"currently %u kHz, last set to %u kHz\n",
 			cpu, policy->min, policy->max,
 			per_cpu(cpu_cur_freq, cpu),
diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 35a257dd4bb..35a257dd4bb 100644
--- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
index c587db472a7..c587db472a7 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/drivers/cpufreq/elanfreq.c
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 05432216e22..90431cb9280 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -14,9 +14,6 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
-
 /*********************************************************************
  *                     FREQUENCY TABLE HELPERS                       *
  *********************************************************************/
@@ -31,11 +28,11 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
 	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
 		unsigned int freq = table[i].frequency;
 		if (freq == CPUFREQ_ENTRY_INVALID) {
-			dprintk("table entry %u is invalid, skipping\n", i);
+			pr_debug("table entry %u is invalid, skipping\n", i);
 
 			continue;
 		}
-		dprintk("table entry %u: %u kHz, %u index\n",
+		pr_debug("table entry %u: %u kHz, %u index\n",
 					i, freq, table[i].index);
 		if (freq < min_freq)
 			min_freq = freq;
@@ -61,7 +58,7 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
 	unsigned int i;
 	unsigned int count = 0;
 
-	dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n",
+	pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n",
 					policy->min, policy->max, policy->cpu);
 
 	if (!cpu_online(policy->cpu))
@@ -86,7 +83,7 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
 				     policy->cpuinfo.max_freq);
 
-	dprintk("verification lead to (%u - %u kHz) for cpu %u\n",
+	pr_debug("verification lead to (%u - %u kHz) for cpu %u\n",
 				policy->min, policy->max, policy->cpu);
 
 	return 0;
@@ -110,7 +107,7 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 	};
 	unsigned int i;
 
-	dprintk("request for target %u kHz (relation: %u) for cpu %u\n",
+	pr_debug("request for target %u kHz (relation: %u) for cpu %u\n",
 					target_freq, relation, policy->cpu);
 
 	switch (relation) {
@@ -167,7 +164,7 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 	} else
 		*index = optimal.index;
 
-	dprintk("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
+	pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
 		table[*index].index);
 
 	return 0;
@@ -216,14 +213,14 @@ EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
 void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
 				      unsigned int cpu)
 {
-	dprintk("setting show_table for cpu %u to %p\n", cpu, table);
+	pr_debug("setting show_table for cpu %u to %p\n", cpu, table);
 	per_cpu(cpufreq_show_table, cpu) = table;
 }
 EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_attr);
 
 void cpufreq_frequency_table_put_attr(unsigned int cpu)
 {
-	dprintk("clearing show_table for cpu %u\n", cpu);
+	pr_debug("clearing show_table for cpu %u\n", cpu);
 	per_cpu(cpufreq_show_table, cpu) = NULL;
 }
 EXPORT_SYMBOL_GPL(cpufreq_frequency_table_put_attr);
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/drivers/cpufreq/gx-suspmod.c
index 32974cf8423..ffe1f2c92ed 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/drivers/cpufreq/gx-suspmod.c
@@ -142,9 +142,6 @@ module_param(max_duration, int, 0444);
 #define POLICY_MIN_DIV 20
 
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"gx-suspmod", msg)
-
 /**
  * we can detect a core multipiler from dir0_lsb
  * from GX1 datasheet p.56,
@@ -191,7 +188,7 @@ static __init struct pci_dev *gx_detect_chipset(void)
 	/* check if CPU is a MediaGX or a Geode. */
 	if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
 	    (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
-		dprintk("error: no MediaGX/Geode processor found!\n");
+		pr_debug("error: no MediaGX/Geode processor found!\n");
 		return NULL;
 	}
 
@@ -201,7 +198,7 @@ static __init struct pci_dev *gx_detect_chipset(void)
 			return gx_pci;
 	}
 
-	dprintk("error: no supported chipset found!\n");
+	pr_debug("error: no supported chipset found!\n");
 	return NULL;
 }
 
@@ -305,14 +302,14 @@ static void gx_set_cpuspeed(unsigned int khz)
 			break;
 		default:
 			local_irq_restore(flags);
-			dprintk("fatal: try to set unknown chipset.\n");
+			pr_debug("fatal: try to set unknown chipset.\n");
 			return;
 		}
 	} else {
 		suscfg = gx_params->pci_suscfg & ~(SUSMOD);
 		gx_params->off_duration = 0;
 		gx_params->on_duration = 0;
-		dprintk("suspend modulation disabled: cpu runs 100%% speed.\n");
+		pr_debug("suspend modulation disabled: cpu runs 100%% speed.\n");
 	}
 
 	gx_write_byte(PCI_MODOFF, gx_params->off_duration);
@@ -327,9 +324,9 @@ static void gx_set_cpuspeed(unsigned int khz)
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
-	dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+	pr_debug("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
 		gx_params->on_duration * 32, gx_params->off_duration * 32);
-	dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
+	pr_debug("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
 }
 
 /****************************************************************
@@ -428,8 +425,8 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
 	stock_freq = maxfreq;
 	curfreq = gx_get_cpuspeed(0);
 
-	dprintk("cpu max frequency is %d.\n", maxfreq);
-	dprintk("cpu current frequency is %dkHz.\n", curfreq);
+	pr_debug("cpu max frequency is %d.\n", maxfreq);
+	pr_debug("cpu current frequency is %dkHz.\n", curfreq);
 
 	/* setup basic struct for cpufreq API */
 	policy->cpu = 0;
@@ -475,7 +472,7 @@ static int __init cpufreq_gx_init(void)
 	if (max_duration > 0xff)
 		max_duration = 0xff;
 
-	dprintk("geode suspend modulation available.\n");
+	pr_debug("geode suspend modulation available.\n");
 
 	params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
 	if (params == NULL)
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index cf48cdd6907..f47d26e2a13 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -77,9 +77,6 @@ static int scale_voltage;
 static int disable_acpi_c3;
 static int revid_errata;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"longhaul", msg)
-
 
 /* Clock ratios multiplied by 10 */
 static int mults[32];
@@ -87,7 +84,6 @@ static int eblcr[32];
 static int longhaul_version;
 static struct cpufreq_frequency_table *longhaul_table;
 
-#ifdef CONFIG_CPU_FREQ_DEBUG
 static char speedbuffer[8];
 
 static char *print_speed(int speed)
@@ -106,7 +102,6 @@ static char *print_speed(int speed)
 
 	return speedbuffer;
 }
-#endif
 
 
 static unsigned int calc_speed(int mult)
@@ -275,7 +270,7 @@ static void longhaul_setstate(unsigned int table_index)
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+	pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
 			fsb, mult/10, mult%10, print_speed(speed/1000));
 retry_loop:
 	preempt_disable();
@@ -460,12 +455,12 @@ static int __cpuinit longhaul_get_ranges(void)
 		break;
 	}
 
-	dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n",
+	pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n",
 		 minmult/10, minmult%10, maxmult/10, maxmult%10);
 
 	highest_speed = calc_speed(maxmult);
 	lowest_speed = calc_speed(minmult);
-	dprintk("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
+	pr_debug("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
 		 print_speed(lowest_speed/1000),
 		 print_speed(highest_speed/1000));
 
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/drivers/cpufreq/longhaul.h
index cbf48fbca88..cbf48fbca88 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.h
+++ b/drivers/cpufreq/longhaul.h
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/drivers/cpufreq/longrun.c
index d9f51367666..34ea359b370 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/drivers/cpufreq/longrun.c
@@ -15,9 +15,6 @@
 #include <asm/msr.h>
 #include <asm/processor.h>
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"longrun", msg)
-
 static struct cpufreq_driver	longrun_driver;
 
 /**
@@ -40,14 +37,14 @@ static void __cpuinit longrun_get_policy(struct cpufreq_policy *policy)
 	u32 msr_lo, msr_hi;
 
 	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
-	dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi);
+	pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi);
 	if (msr_lo & 0x01)
 		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
 	else
 		policy->policy = CPUFREQ_POLICY_POWERSAVE;
 
 	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
-	dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
+	pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
 	msr_lo &= 0x0000007F;
 	msr_hi &= 0x0000007F;
 
@@ -150,7 +147,7 @@ static unsigned int longrun_get(unsigned int cpu)
 		return 0;
 
 	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
-	dprintk("cpuid eax is %u\n", eax);
+	pr_debug("cpuid eax is %u\n", eax);
 
 	return eax * 1000;
 }
@@ -196,7 +193,7 @@ static int __cpuinit longrun_determine_freqs(unsigned int *low_freq,
 		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
 		*high_freq = msr_lo * 1000; /* to kHz */
 
-		dprintk("longrun table interface told %u - %u kHz\n",
+		pr_debug("longrun table interface told %u - %u kHz\n",
 				*low_freq, *high_freq);
 
 		if (*low_freq > *high_freq)
@@ -207,7 +204,7 @@ static int __cpuinit longrun_determine_freqs(unsigned int *low_freq,
 	/* set the upper border to the value determined during TSC init */
 	*high_freq = (cpu_khz / 1000);
 	*high_freq = *high_freq * 1000;
-	dprintk("high frequency is %u kHz\n", *high_freq);
+	pr_debug("high frequency is %u kHz\n", *high_freq);
 
 	/* get current borders */
 	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
@@ -233,7 +230,7 @@ static int __cpuinit longrun_determine_freqs(unsigned int *low_freq,
 		/* restore values */
 		wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
 	}
-	dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax);
+	pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax);
 
 	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
 	 * eqals
@@ -249,7 +246,7 @@ static int __cpuinit longrun_determine_freqs(unsigned int *low_freq,
 	edx = ((eax - ebx) * 100) / (100 - ecx);
 	*low_freq = edx * 1000; /* back to kHz */
 
-	dprintk("low frequency is %u kHz\n", *low_freq);
+	pr_debug("low frequency is %u kHz\n", *low_freq);
 
 	if (*low_freq > *high_freq)
 		*low_freq = *high_freq;
diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.c b/drivers/cpufreq/mperf.c
index 911e193018a..911e193018a 100644
--- a/arch/x86/kernel/cpu/cpufreq/mperf.c
+++ b/drivers/cpufreq/mperf.c
diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.h b/drivers/cpufreq/mperf.h
index 5dbf2950dc2..5dbf2950dc2 100644
--- a/arch/x86/kernel/cpu/cpufreq/mperf.h
+++ b/drivers/cpufreq/mperf.h
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c
index 52c93648e49..6be3e0760c2 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/drivers/cpufreq/p4-clockmod.c
@@ -35,8 +35,6 @@
 #include "speedstep-lib.h"
 
 #define PFX	"p4-clockmod: "
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"p4-clockmod", msg)
 
 /*
  * Duty Cycle (3bits), note DC_DISABLE is not specified in
@@ -66,7 +64,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
 
 	if (l & 0x01)
-		dprintk("CPU#%d currently thermal throttled\n", cpu);
+		pr_debug("CPU#%d currently thermal throttled\n", cpu);
 
 	if (has_N44_O17_errata[cpu] &&
 	    (newstate == DC_25PT || newstate == DC_DFLT))
@@ -74,10 +72,10 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 
 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
 	if (newstate == DC_DISABLE) {
-		dprintk("CPU#%d disabling modulation\n", cpu);
+		pr_debug("CPU#%d disabling modulation\n", cpu);
 		wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
 	} else {
-		dprintk("CPU#%d setting duty cycle to %d%%\n",
+		pr_debug("CPU#%d setting duty cycle to %d%%\n",
 			cpu, ((125 * newstate) / 10));
 		/* bits 63 - 5	: reserved
 		 * bit  4	: enable/disable
@@ -217,7 +215,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 	case 0x0f11:
 	case 0x0f12:
 		has_N44_O17_errata[policy->cpu] = 1;
-		dprintk("has errata -- disabling low frequencies\n");
+		pr_debug("has errata -- disabling low frequencies\n");
 	}
 
 	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index 755a31e0f5b..7b0603eb012 100644
--- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -39,7 +39,7 @@
 
 #include <acpi/processor.h>
 
-#define PCC_VERSION 	"1.00.00"
+#define PCC_VERSION	"1.10.00"
 #define POLL_LOOPS 	300
 
 #define CMD_COMPLETE 	0x1
@@ -48,9 +48,6 @@
 
 #define BUF_SZ		4
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,	\
-					     "pcc-cpufreq", msg)
-
 struct pcc_register_resource {
 	u8 descriptor;
 	u16 length;
@@ -102,7 +99,7 @@ static struct acpi_generic_address doorbell;
 static u64 doorbell_preserve;
 static u64 doorbell_write;
 
-static u8 OSC_UUID[16] = {0x63, 0x9B, 0x2C, 0x9F, 0x70, 0x91, 0x49, 0x1f,
+static u8 OSC_UUID[16] = {0x9F, 0x2C, 0x9B, 0x63, 0x91, 0x70, 0x1f, 0x49,
 			  0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46};
 
 struct pcc_cpu {
@@ -152,7 +149,7 @@ static unsigned int pcc_get_freq(unsigned int cpu)
 
 	spin_lock(&pcc_lock);
 
-	dprintk("get: get_freq for CPU %d\n", cpu);
+	pr_debug("get: get_freq for CPU %d\n", cpu);
 	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
 
 	input_buffer = 0x1;
@@ -170,7 +167,7 @@ static unsigned int pcc_get_freq(unsigned int cpu)
 
 	status = ioread16(&pcch_hdr->status);
 	if (status != CMD_COMPLETE) {
-		dprintk("get: FAILED: for CPU %d, status is %d\n",
+		pr_debug("get: FAILED: for CPU %d, status is %d\n",
 			cpu, status);
 		goto cmd_incomplete;
 	}
@@ -178,14 +175,14 @@ static unsigned int pcc_get_freq(unsigned int cpu)
 	curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff))
 			/ 100) * 1000);
 
-	dprintk("get: SUCCESS: (virtual) output_offset for cpu %d is "
-		"0x%x, contains a value of: 0x%x. Speed is: %d MHz\n",
+	pr_debug("get: SUCCESS: (virtual) output_offset for cpu %d is "
+		"0x%p, contains a value of: 0x%x. Speed is: %d MHz\n",
 		cpu, (pcch_virt_addr + pcc_cpu_data->output_offset),
 		output_buffer, curr_freq);
 
 	freq_limit = (output_buffer >> 8) & 0xff;
 	if (freq_limit != 0xff) {
-		dprintk("get: frequency for cpu %d is being temporarily"
+		pr_debug("get: frequency for cpu %d is being temporarily"
 			" capped at %d\n", cpu, curr_freq);
 	}
 
@@ -212,8 +209,8 @@ static int pcc_cpufreq_target(struct cpufreq_policy *policy,
 	cpu = policy->cpu;
 	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
 
-	dprintk("target: CPU %d should go to target freq: %d "
-		"(virtual) input_offset is 0x%x\n",
+	pr_debug("target: CPU %d should go to target freq: %d "
+		"(virtual) input_offset is 0x%p\n",
 		cpu, target_freq,
 		(pcch_virt_addr + pcc_cpu_data->input_offset));
 
@@ -234,14 +231,14 @@ static int pcc_cpufreq_target(struct cpufreq_policy *policy,
 
 	status = ioread16(&pcch_hdr->status);
 	if (status != CMD_COMPLETE) {
-		dprintk("target: FAILED for cpu %d, with status: 0x%x\n",
+		pr_debug("target: FAILED for cpu %d, with status: 0x%x\n",
 			cpu, status);
 		goto cmd_incomplete;
 	}
 	iowrite16(0, &pcch_hdr->status);
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	dprintk("target: was SUCCESSFUL for cpu %d\n", cpu);
+	pr_debug("target: was SUCCESSFUL for cpu %d\n", cpu);
 	spin_unlock(&pcc_lock);
 
 	return 0;
@@ -293,7 +290,7 @@ static int pcc_get_offset(int cpu)
 	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
 	memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ);
 
-	dprintk("pcc_get_offset: for CPU %d: pcc_cpu_data "
+	pr_debug("pcc_get_offset: for CPU %d: pcc_cpu_data "
 		"input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n",
 		cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset);
 out_free:
@@ -410,7 +407,7 @@ static int __init pcc_cpufreq_probe(void)
 	if (ACPI_SUCCESS(status)) {
 		ret = pcc_cpufreq_do_osc(&osc_handle);
 		if (ret)
-			dprintk("probe: _OSC evaluation did not succeed\n");
+			pr_debug("probe: _OSC evaluation did not succeed\n");
 		/* Firmware's use of _OSC is optional */
 		ret = 0;
 	}
@@ -433,7 +430,7 @@ static int __init pcc_cpufreq_probe(void)
 
 	mem_resource = (struct pcc_memory_resource *)member->buffer.pointer;
 
-	dprintk("probe: mem_resource descriptor: 0x%x,"
+	pr_debug("probe: mem_resource descriptor: 0x%x,"
 		" length: %d, space_id: %d, resource_usage: %d,"
 		" type_specific: %d, granularity: 0x%llx,"
 		" minimum: 0x%llx, maximum: 0x%llx,"
@@ -453,13 +450,13 @@ static int __init pcc_cpufreq_probe(void)
 	pcch_virt_addr = ioremap_nocache(mem_resource->minimum,
 					mem_resource->address_length);
 	if (pcch_virt_addr == NULL) {
-		dprintk("probe: could not map shared mem region\n");
+		pr_debug("probe: could not map shared mem region\n");
 		goto out_free;
 	}
 	pcch_hdr = pcch_virt_addr;
 
-	dprintk("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
-	dprintk("probe: PCCH header is at physical address: 0x%llx,"
+	pr_debug("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
+	pr_debug("probe: PCCH header is at physical address: 0x%llx,"
 		" signature: 0x%x, length: %d bytes, major: %d, minor: %d,"
 		" supported features: 0x%x, command field: 0x%x,"
 		" status field: 0x%x, nominal latency: %d us\n",
@@ -469,7 +466,7 @@ static int __init pcc_cpufreq_probe(void)
 		ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status),
 		ioread32(&pcch_hdr->latency));
 
-	dprintk("probe: min time between commands: %d us,"
+	pr_debug("probe: min time between commands: %d us,"
 		" max time between commands: %d us,"
 		" nominal CPU frequency: %d MHz,"
 		" minimum CPU frequency: %d MHz,"
@@ -494,7 +491,7 @@ static int __init pcc_cpufreq_probe(void)
 	doorbell.access_width = 64;
 	doorbell.address = reg_resource->address;
 
-	dprintk("probe: doorbell: space_id is %d, bit_width is %d, "
+	pr_debug("probe: doorbell: space_id is %d, bit_width is %d, "
 		"bit_offset is %d, access_width is %d, address is 0x%llx\n",
 		doorbell.space_id, doorbell.bit_width, doorbell.bit_offset,
 		doorbell.access_width, reg_resource->address);
@@ -515,7 +512,7 @@ static int __init pcc_cpufreq_probe(void)
 
 	doorbell_write = member->integer.value;
 
-	dprintk("probe: doorbell_preserve: 0x%llx,"
+	pr_debug("probe: doorbell_preserve: 0x%llx,"
 		" doorbell_write: 0x%llx\n",
 		doorbell_preserve, doorbell_write);
 
@@ -550,7 +547,7 @@ static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	result = pcc_get_offset(cpu);
 	if (result) {
-		dprintk("init: PCCP evaluation failed\n");
+		pr_debug("init: PCCP evaluation failed\n");
 		goto out;
 	}
 
@@ -561,12 +558,12 @@ static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->cur = pcc_get_freq(cpu);
 
 	if (!policy->cur) {
-		dprintk("init: Unable to get current CPU frequency\n");
+		pr_debug("init: Unable to get current CPU frequency\n");
 		result = -EINVAL;
 		goto out;
 	}
 
-	dprintk("init: policy->max is %d, policy->min is %d\n",
+	pr_debug("init: policy->max is %d, policy->min is %d\n",
 		policy->max, policy->min);
 out:
 	return result;
@@ -597,7 +594,7 @@ static int __init pcc_cpufreq_init(void)
 
 	ret = pcc_cpufreq_probe();
 	if (ret) {
-		dprintk("pcc_cpufreq_init: PCCH evaluation failed\n");
+		pr_debug("pcc_cpufreq_init: PCCH evaluation failed\n");
 		return ret;
 	}
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index b3379d6a5c5..b3379d6a5c5 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
index 4a45fd6e41b..d71d9f37235 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -68,7 +68,6 @@ union powernow_acpi_control_t {
 };
 #endif
 
-#ifdef CONFIG_CPU_FREQ_DEBUG
 /* divide by 1000 to get VCore voltage in V. */
 static const int mobile_vid_table[32] = {
     2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
@@ -76,7 +75,6 @@ static const int mobile_vid_table[32] = {
     1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
     1075, 1050, 1025, 1000, 975, 950, 925, 0,
 };
-#endif
 
 /* divide by 10 to get FID. */
 static const int fid_codes[32] = {
@@ -103,9 +101,6 @@ static unsigned int fsb;
 static unsigned int latency;
 static char have_a0;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"powernow-k7", msg)
-
 static int check_fsb(unsigned int fsbspeed)
 {
 	int delta;
@@ -209,7 +204,7 @@ static int get_ranges(unsigned char *pst)
 		vid = *pst++;
 		powernow_table[j].index |= (vid << 8); /* upper 8 bits */
 
-		dprintk("   FID: 0x%x (%d.%dx [%dMHz])  "
+		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
 			 fid_codes[fid] % 10, speed/1000, vid,
 			 mobile_vid_table[vid]/1000,
@@ -367,7 +362,7 @@ static int powernow_acpi_init(void)
 		unsigned int speed, speed_mhz;
 
 		pc.val = (unsigned long) state->control;
-		dprintk("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+		pr_debug("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
 			 i,
 			 (u32) state->core_frequency,
 			 (u32) state->power,
@@ -401,7 +396,7 @@ static int powernow_acpi_init(void)
 				invalidate_entry(i);
 		}
 
-		dprintk("   FID: 0x%x (%d.%dx [%dMHz])  "
+		pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  "
 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
 			 fid_codes[fid] % 10, speed_mhz, vid,
 			 mobile_vid_table[vid]/1000,
@@ -409,7 +404,7 @@ static int powernow_acpi_init(void)
 
 		if (state->core_frequency != speed_mhz) {
 			state->core_frequency = speed_mhz;
-			dprintk("   Corrected ACPI frequency to %d\n",
+			pr_debug("   Corrected ACPI frequency to %d\n",
 				speed_mhz);
 		}
 
@@ -453,8 +448,8 @@ static int powernow_acpi_init(void)
 
 static void print_pst_entry(struct pst_s *pst, unsigned int j)
 {
-	dprintk("PST:%d (@%p)\n", j, pst);
-	dprintk(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
+	pr_debug("PST:%d (@%p)\n", j, pst);
+	pr_debug(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
 		pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
 }
 
@@ -474,20 +469,20 @@ static int powernow_decode_bios(int maxfid, int startvid)
 		p = phys_to_virt(i);
 
 		if (memcmp(p, "AMDK7PNOW!",  10) == 0) {
-			dprintk("Found PSB header at %p\n", p);
+			pr_debug("Found PSB header at %p\n", p);
 			psb = (struct psb_s *) p;
-			dprintk("Table version: 0x%x\n", psb->tableversion);
+			pr_debug("Table version: 0x%x\n", psb->tableversion);
 			if (psb->tableversion != 0x12) {
 				printk(KERN_INFO PFX "Sorry, only v1.2 tables"
 						" supported right now\n");
 				return -ENODEV;
 			}
 
-			dprintk("Flags: 0x%x\n", psb->flags);
+			pr_debug("Flags: 0x%x\n", psb->flags);
 			if ((psb->flags & 1) == 0)
-				dprintk("Mobile voltage regulator\n");
+				pr_debug("Mobile voltage regulator\n");
 			else
-				dprintk("Desktop voltage regulator\n");
+				pr_debug("Desktop voltage regulator\n");
 
 			latency = psb->settlingtime;
 			if (latency < 100) {
@@ -497,9 +492,9 @@ static int powernow_decode_bios(int maxfid, int startvid)
 						"Correcting.\n", latency);
 				latency = 100;
 			}
-			dprintk("Settling Time: %d microseconds.\n",
+			pr_debug("Settling Time: %d microseconds.\n",
 					psb->settlingtime);
-			dprintk("Has %d PST tables. (Only dumping ones "
+			pr_debug("Has %d PST tables. (Only dumping ones "
 					"relevant to this CPU).\n",
 					psb->numpst);
 
@@ -650,7 +645,7 @@ static int __cpuinit powernow_cpu_init(struct cpufreq_policy *policy)
 		printk(KERN_WARNING PFX "can not determine bus frequency\n");
 		return -EINVAL;
 	}
-	dprintk("FSB: %3dMHz\n", fsb/1000);
+	pr_debug("FSB: %3dMHz\n", fsb/1000);
 
 	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
 		printk(KERN_INFO PFX "PSB/PST known to be broken.  "
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/drivers/cpufreq/powernow-k7.h
index 35fb4eaf6e1..35fb4eaf6e1 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
+++ b/drivers/cpufreq/powernow-k7.h
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index 2368e38327b..83479b6fb9a 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -139,7 +139,7 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
 	}
 	do {
 		if (i++ > 10000) {
-			dprintk("detected change pending stuck\n");
+			pr_debug("detected change pending stuck\n");
 			return 1;
 		}
 		rdmsr(MSR_FIDVID_STATUS, lo, hi);
@@ -176,7 +176,7 @@ static void fidvid_msr_init(void)
 	fid = lo & MSR_S_LO_CURRENT_FID;
 	lo = fid | (vid << MSR_C_LO_VID_SHIFT);
 	hi = MSR_C_HI_STP_GNT_BENIGN;
-	dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
+	pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
 	wrmsr(MSR_FIDVID_CTL, lo, hi);
 }
 
@@ -196,7 +196,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 	lo |= (data->currvid << MSR_C_LO_VID_SHIFT);
 	lo |= MSR_C_LO_INIT_FID_VID;
 
-	dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
+	pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
 		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
 
 	do {
@@ -244,7 +244,7 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 	lo |= (vid << MSR_C_LO_VID_SHIFT);
 	lo |= MSR_C_LO_INIT_FID_VID;
 
-	dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
+	pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
 		vid, lo, STOP_GRANT_5NS);
 
 	do {
@@ -325,7 +325,7 @@ static int transition_fid_vid(struct powernow_k8_data *data,
 		return 1;
 	}
 
-	dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
+	pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
 		smp_processor_id(), data->currfid, data->currvid);
 
 	return 0;
@@ -339,7 +339,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data,
 	u32 savefid = data->currfid;
 	u32 maxvid, lo, rvomult = 1;
 
-	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
+	pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
 		"reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
@@ -349,12 +349,12 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data,
 	rvosteps *= rvomult;
 	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
 	maxvid = 0x1f & (maxvid >> 16);
-	dprintk("ph1 maxvid=0x%x\n", maxvid);
+	pr_debug("ph1 maxvid=0x%x\n", maxvid);
 	if (reqvid < maxvid) /* lower numbers are higher voltages */
 		reqvid = maxvid;
 
 	while (data->currvid > reqvid) {
-		dprintk("ph1: curr 0x%x, req vid 0x%x\n",
+		pr_debug("ph1: curr 0x%x, req vid 0x%x\n",
 			data->currvid, reqvid);
 		if (decrease_vid_code_by_step(data, reqvid, data->vidmvs))
 			return 1;
@@ -365,7 +365,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data,
 		if (data->currvid == maxvid) {
 			rvosteps = 0;
 		} else {
-			dprintk("ph1: changing vid for rvo, req 0x%x\n",
+			pr_debug("ph1: changing vid for rvo, req 0x%x\n",
 				data->currvid - 1);
 			if (decrease_vid_code_by_step(data, data->currvid-1, 1))
 				return 1;
@@ -382,7 +382,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data,
 		return 1;
 	}
 
-	dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n",
+	pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n",
 		data->currfid, data->currvid);
 
 	return 0;
@@ -400,7 +400,7 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 		return 0;
 	}
 
-	dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
+	pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
 		"reqfid 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqfid);
@@ -457,7 +457,7 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 		return 1;
 	}
 
-	dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n",
+	pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n",
 		data->currfid, data->currvid);
 
 	return 0;
@@ -470,7 +470,7 @@ static int core_voltage_post_transition(struct powernow_k8_data *data,
 	u32 savefid = data->currfid;
 	u32 savereqvid = reqvid;
 
-	dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
+	pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid);
 
@@ -498,17 +498,17 @@ static int core_voltage_post_transition(struct powernow_k8_data *data,
 		return 1;
 
 	if (savereqvid != data->currvid) {
-		dprintk("ph3 failed, currvid 0x%x\n", data->currvid);
+		pr_debug("ph3 failed, currvid 0x%x\n", data->currvid);
 		return 1;
 	}
 
 	if (savefid != data->currfid) {
-		dprintk("ph3 failed, currfid changed 0x%x\n",
+		pr_debug("ph3 failed, currfid changed 0x%x\n",
 			data->currfid);
 		return 1;
 	}
 
-	dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n",
+	pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n",
 		data->currfid, data->currvid);
 
 	return 0;
@@ -707,7 +707,7 @@ static int fill_powernow_table(struct powernow_k8_data *data,
 		return -EIO;
 	}
 
-	dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
+	pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
 	data->powernow_table = powernow_table;
 	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
 		print_basics(data);
@@ -717,7 +717,7 @@ static int fill_powernow_table(struct powernow_k8_data *data,
 		    (pst[j].vid == data->currvid))
 			return 0;
 
-	dprintk("currfid/vid do not match PST, ignoring\n");
+	pr_debug("currfid/vid do not match PST, ignoring\n");
 	return 0;
 }
 
@@ -739,36 +739,36 @@ static int find_psb_table(struct powernow_k8_data *data)
 		if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
 			continue;
 
-		dprintk("found PSB header at 0x%p\n", psb);
+		pr_debug("found PSB header at 0x%p\n", psb);
 
-		dprintk("table vers: 0x%x\n", psb->tableversion);
+		pr_debug("table vers: 0x%x\n", psb->tableversion);
 		if (psb->tableversion != PSB_VERSION_1_4) {
 			printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n");
 			return -ENODEV;
 		}
 
-		dprintk("flags: 0x%x\n", psb->flags1);
+		pr_debug("flags: 0x%x\n", psb->flags1);
 		if (psb->flags1) {
 			printk(KERN_ERR FW_BUG PFX "unknown flags\n");
 			return -ENODEV;
 		}
 
 		data->vstable = psb->vstable;
-		dprintk("voltage stabilization time: %d(*20us)\n",
+		pr_debug("voltage stabilization time: %d(*20us)\n",
 				data->vstable);
 
-		dprintk("flags2: 0x%x\n", psb->flags2);
+		pr_debug("flags2: 0x%x\n", psb->flags2);
 		data->rvo = psb->flags2 & 3;
 		data->irt = ((psb->flags2) >> 2) & 3;
 		mvs = ((psb->flags2) >> 4) & 3;
 		data->vidmvs = 1 << mvs;
 		data->batps = ((psb->flags2) >> 6) & 3;
 
-		dprintk("ramp voltage offset: %d\n", data->rvo);
-		dprintk("isochronous relief time: %d\n", data->irt);
-		dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
+		pr_debug("ramp voltage offset: %d\n", data->rvo);
+		pr_debug("isochronous relief time: %d\n", data->irt);
+		pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
 
-		dprintk("numpst: 0x%x\n", psb->num_tables);
+		pr_debug("numpst: 0x%x\n", psb->num_tables);
 		cpst = psb->num_tables;
 		if ((psb->cpuid == 0x00000fc0) ||
 		    (psb->cpuid == 0x00000fe0)) {
@@ -783,13 +783,13 @@ static int find_psb_table(struct powernow_k8_data *data)
 		}
 
 		data->plllock = psb->plllocktime;
-		dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
-		dprintk("maxfid: 0x%x\n", psb->maxfid);
-		dprintk("maxvid: 0x%x\n", psb->maxvid);
+		pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
+		pr_debug("maxfid: 0x%x\n", psb->maxfid);
+		pr_debug("maxvid: 0x%x\n", psb->maxvid);
 		maxvid = psb->maxvid;
 
 		data->numps = psb->numps;
-		dprintk("numpstates: 0x%x\n", data->numps);
+		pr_debug("numpstates: 0x%x\n", data->numps);
 		return fill_powernow_table(data,
 				(struct pst_s *)(psb+1), maxvid);
 	}
@@ -834,13 +834,13 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	u64 control, status;
 
 	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
-		dprintk("register performance failed: bad ACPI data\n");
+		pr_debug("register performance failed: bad ACPI data\n");
 		return -EIO;
 	}
 
 	/* verify the data contained in the ACPI structures */
 	if (data->acpi_data.state_count <= 1) {
-		dprintk("No ACPI P-States\n");
+		pr_debug("No ACPI P-States\n");
 		goto err_out;
 	}
 
@@ -849,7 +849,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 
 	if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
 	    (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
-		dprintk("Invalid control/status registers (%x - %x)\n",
+		pr_debug("Invalid control/status registers (%llx - %llx)\n",
 			control, status);
 		goto err_out;
 	}
@@ -858,7 +858,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
 		* (data->acpi_data.state_count + 1)), GFP_KERNEL);
 	if (!powernow_table) {
-		dprintk("powernow_table memory alloc failure\n");
+		pr_debug("powernow_table memory alloc failure\n");
 		goto err_out;
 	}
 
@@ -928,7 +928,7 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 		}
 		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
 		if (!(hi & HW_PSTATE_VALID_MASK)) {
-			dprintk("invalid pstate %d, ignoring\n", index);
+			pr_debug("invalid pstate %d, ignoring\n", index);
 			invalidate_entry(powernow_table, i);
 			continue;
 		}
@@ -968,7 +968,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 			vid = (control >> VID_SHIFT) & VID_MASK;
 		}
 
-		dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+		pr_debug("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
 
 		index = fid | (vid<<8);
 		powernow_table[i].index = index;
@@ -978,7 +978,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 
 		/* verify frequency is OK */
 		if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
-			dprintk("invalid freq %u kHz, ignoring\n", freq);
+			pr_debug("invalid freq %u kHz, ignoring\n", freq);
 			invalidate_entry(powernow_table, i);
 			continue;
 		}
@@ -986,7 +986,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		/* verify voltage is OK -
 		 * BIOSs are using "off" to indicate invalid */
 		if (vid == VID_OFF) {
-			dprintk("invalid vid %u, ignoring\n", vid);
+			pr_debug("invalid vid %u, ignoring\n", vid);
 			invalidate_entry(powernow_table, i);
 			continue;
 		}
@@ -1047,7 +1047,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 	int res, i;
 	struct cpufreq_freqs freqs;
 
-	dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+	pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
 
 	/* fid/vid correctness check for k8 */
 	/* fid are the lower 8 bits of the index we stored into
@@ -1057,18 +1057,18 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 	fid = data->powernow_table[index].index & 0xFF;
 	vid = (data->powernow_table[index].index & 0xFF00) >> 8;
 
-	dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
+	pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
 
 	if (query_current_values_with_pending_wait(data))
 		return 1;
 
 	if ((data->currvid == vid) && (data->currfid == fid)) {
-		dprintk("target matches current values (fid 0x%x, vid 0x%x)\n",
+		pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n",
 			fid, vid);
 		return 0;
 	}
 
-	dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
+	pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n",
 		smp_processor_id(), fid, vid);
 	freqs.old = find_khz_freq_from_fid(data->currfid);
 	freqs.new = find_khz_freq_from_fid(fid);
@@ -1096,7 +1096,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data,
 	int res, i;
 	struct cpufreq_freqs freqs;
 
-	dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+	pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index);
 
 	/* get MSR index for hardware pstate transition */
 	pstate = index & HW_PSTATE_MASK;
@@ -1156,14 +1156,14 @@ static int powernowk8_target(struct cpufreq_policy *pol,
 		goto err_out;
 	}
 
-	dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
+	pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
 		pol->cpu, targfreq, pol->min, pol->max, relation);
 
 	if (query_current_values_with_pending_wait(data))
 		goto err_out;
 
 	if (cpu_family != CPU_HW_PSTATE) {
-		dprintk("targ: curr fid 0x%x, vid 0x%x\n",
+		pr_debug("targ: curr fid 0x%x, vid 0x%x\n",
 		data->currfid, data->currvid);
 
 		if ((checkvid != data->currvid) ||
@@ -1319,7 +1319,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 				data->currpstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
-	dprintk("policy current frequency %d kHz\n", pol->cur);
+	pr_debug("policy current frequency %d kHz\n", pol->cur);
 
 	/* min/max the cpu is capable of */
 	if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
@@ -1337,10 +1337,10 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		dprintk("cpu_init done, current pstate 0x%x\n",
+		pr_debug("cpu_init done, current pstate 0x%x\n",
 				data->currpstate);
 	else
-		dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
+		pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n",
 			data->currfid, data->currvid);
 
 	per_cpu(powernow_data, pol->cpu) = data;
@@ -1586,7 +1586,7 @@ static int __cpuinit powernowk8_init(void)
 /* driver entry point for term */
 static void __exit powernowk8_exit(void)
 {
-	dprintk("exit\n");
+	pr_debug("exit\n");
 
 	if (boot_cpu_has(X86_FEATURE_CPB)) {
 		msrs_free(msrs);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/drivers/cpufreq/powernow-k8.h
index df3529b1c02..3744d26cdc2 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/drivers/cpufreq/powernow-k8.h
@@ -211,8 +211,6 @@ struct pst_s {
 	u8 vid;
 };
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
-
 static int core_voltage_pre_transition(struct powernow_k8_data *data,
 	u32 reqvid, u32 regfid);
 static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c
index 435a996a613..1e205e6b172 100644
--- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
+++ b/drivers/cpufreq/sc520_freq.c
@@ -29,8 +29,6 @@
 
 static __u8 __iomem *cpuctl;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"sc520_freq", msg)
 #define PFX "sc520_freq: "
 
 static struct cpufreq_frequency_table sc520_freq_table[] = {
@@ -66,7 +64,7 @@ static void sc520_freq_set_cpu_state(unsigned int state)
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	dprintk("attempting to set frequency to %i kHz\n",
+	pr_debug("attempting to set frequency to %i kHz\n",
 			sc520_freq_table[state].frequency);
 
 	local_irq_disable();
@@ -161,7 +159,7 @@ static int __init sc520_freq_init(void)
 	/* Test if we have the right hardware */
 	if (c->x86_vendor != X86_VENDOR_AMD ||
 	    c->x86 != 4 || c->x86_model != 9) {
-		dprintk("no Elan SC520 processor found!\n");
+		pr_debug("no Elan SC520 processor found!\n");
 		return -ENODEV;
 	}
 	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c
index 9b1ff37de46..6ea3455def2 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -29,9 +29,6 @@
 #define PFX		"speedstep-centrino: "
 #define MAINTAINER	"cpufreq@vger.kernel.org"
 
-#define dprintk(msg...) \
-	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
-
 #define INTEL_MSR_RANGE	(0xffff)
 
 struct cpu_id
@@ -244,7 +241,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 
 	if (model->cpu_id == NULL) {
 		/* No match at all */
-		dprintk("no support for CPU model \"%s\": "
+		pr_debug("no support for CPU model \"%s\": "
 		       "send /proc/cpuinfo to " MAINTAINER "\n",
 		       cpu->x86_model_id);
 		return -ENOENT;
@@ -252,15 +249,15 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 
 	if (model->op_points == NULL) {
 		/* Matched a non-match */
-		dprintk("no table support for CPU model \"%s\"\n",
+		pr_debug("no table support for CPU model \"%s\"\n",
 		       cpu->x86_model_id);
-		dprintk("try using the acpi-cpufreq driver\n");
+		pr_debug("try using the acpi-cpufreq driver\n");
 		return -ENOENT;
 	}
 
 	per_cpu(centrino_model, policy->cpu) = model;
 
-	dprintk("found \"%s\": max frequency: %dkHz\n",
+	pr_debug("found \"%s\": max frequency: %dkHz\n",
 	       model->model_name, model->max_freq);
 
 	return 0;
@@ -369,7 +366,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
 
 	if (!per_cpu(centrino_cpu, policy->cpu)) {
-		dprintk("found unsupported CPU with "
+		pr_debug("found unsupported CPU with "
 		"Enhanced SpeedStep: send /proc/cpuinfo to "
 		MAINTAINER "\n");
 		return -ENODEV;
@@ -385,7 +382,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 
 	if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
 		l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
-		dprintk("trying to enable Enhanced SpeedStep (%x)\n", l);
+		pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
 		wrmsr(MSR_IA32_MISC_ENABLE, l, h);
 
 		/* check to see if it stuck */
@@ -402,7 +399,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 						/* 10uS transition latency */
 	policy->cur = freq;
 
-	dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
+	pr_debug("centrino_cpu_init: cur=%dkHz\n", policy->cur);
 
 	ret = cpufreq_frequency_table_cpuinfo(policy,
 		per_cpu(centrino_model, policy->cpu)->op_points);
@@ -498,7 +495,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			good_cpu = j;
 
 		if (good_cpu >= nr_cpu_ids) {
-			dprintk("couldn't limit to CPUs in this domain\n");
+			pr_debug("couldn't limit to CPUs in this domain\n");
 			retval = -EAGAIN;
 			if (first_cpu) {
 				/* We haven't started the transition yet. */
@@ -512,7 +509,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 		if (first_cpu) {
 			rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
 			if (msr == (oldmsr & 0xffff)) {
-				dprintk("no change needed - msr was and needs "
+				pr_debug("no change needed - msr was and needs "
 					"to be %x\n", oldmsr);
 				retval = 0;
 				goto out;
@@ -521,7 +518,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			freqs.old = extract_clock(oldmsr, cpu, 0);
 			freqs.new = extract_clock(msr, cpu, 0);
 
-			dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
+			pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
 				target_freq, freqs.old, freqs.new, msr);
 
 			for_each_cpu(k, policy->cpus) {
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c
index 561758e9518..a748ce782fe 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/drivers/cpufreq/speedstep-ich.c
@@ -53,10 +53,6 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
 };
 
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"speedstep-ich", msg)
-
-
 /**
  * speedstep_find_register - read the PMBASE address
  *
@@ -80,7 +76,7 @@ static int speedstep_find_register(void)
 		return -ENODEV;
 	}
 
-	dprintk("pmbase is 0x%x\n", pmbase);
+	pr_debug("pmbase is 0x%x\n", pmbase);
 	return 0;
 }
 
@@ -106,13 +102,13 @@ static void speedstep_set_state(unsigned int state)
 	/* read state */
 	value = inb(pmbase + 0x50);
 
-	dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
 
 	/* write new state */
 	value &= 0xFE;
 	value |= state;
 
-	dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
+	pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
 
 	/* Disable bus master arbitration */
 	pm2_blk = inb(pmbase + 0x20);
@@ -132,10 +128,10 @@ static void speedstep_set_state(unsigned int state)
 	/* Enable IRQs */
 	local_irq_restore(flags);
 
-	dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
 
 	if (state == (value & 0x1))
-		dprintk("change to %u MHz succeeded\n",
+		pr_debug("change to %u MHz succeeded\n",
 			speedstep_get_frequency(speedstep_processor) / 1000);
 	else
 		printk(KERN_ERR "cpufreq: change failed - I/O error\n");
@@ -165,7 +161,7 @@ static int speedstep_activate(void)
 	pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
 	if (!(value & 0x08)) {
 		value |= 0x08;
-		dprintk("activating SpeedStep (TM) registers\n");
+		pr_debug("activating SpeedStep (TM) registers\n");
 		pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
 	}
 
@@ -218,7 +214,7 @@ static unsigned int speedstep_detect_chipset(void)
 			return 2; /* 2-M */
 
 		if (hostbridge->revision < 5) {
-			dprintk("hostbridge does not support speedstep\n");
+			pr_debug("hostbridge does not support speedstep\n");
 			speedstep_chipset_dev = NULL;
 			pci_dev_put(hostbridge);
 			return 0;
@@ -246,7 +242,7 @@ static unsigned int speedstep_get(unsigned int cpu)
 	if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
 		BUG();
 
-	dprintk("detected %u kHz as current frequency\n", speed);
+	pr_debug("detected %u kHz as current frequency\n", speed);
 	return speed;
 }
 
@@ -276,7 +272,7 @@ static int speedstep_target(struct cpufreq_policy *policy,
 	freqs.new = speedstep_freqs[newstate].frequency;
 	freqs.cpu = policy->cpu;
 
-	dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new);
+	pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);
 
 	/* no transition necessary */
 	if (freqs.old == freqs.new)
@@ -351,7 +347,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 	if (!speed)
 		return -EIO;
 
-	dprintk("currently at %s speed setting - %i MHz\n",
+	pr_debug("currently at %s speed setting - %i MHz\n",
 		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
 		? "low" : "high",
 		(speed / 1000));
@@ -405,14 +401,14 @@ static int __init speedstep_init(void)
 	/* detect processor */
 	speedstep_processor = speedstep_detect_processor();
 	if (!speedstep_processor) {
-		dprintk("Intel(R) SpeedStep(TM) capable processor "
+		pr_debug("Intel(R) SpeedStep(TM) capable processor "
 				"not found\n");
 		return -ENODEV;
 	}
 
 	/* detect chipset */
 	if (!speedstep_detect_chipset()) {
-		dprintk("Intel(R) SpeedStep(TM) for this chipset not "
+		pr_debug("Intel(R) SpeedStep(TM) for this chipset not "
 				"(yet) available.\n");
 		return -ENODEV;
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
index a94ec6be69f..8af2d2fd9d5 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -18,9 +18,6 @@
 #include <asm/tsc.h>
 #include "speedstep-lib.h"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"speedstep-lib", msg)
-
 #define PFX "speedstep-lib: "
 
 #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
@@ -75,7 +72,7 @@ static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
 
 	/* read MSR 0x2a - we only need the low 32 bits */
 	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
-	dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+	pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
 	msr_tmp = msr_lo;
 
 	/* decode the FSB */
@@ -89,7 +86,7 @@ static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
 
 	/* decode the multiplier */
 	if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
-		dprintk("workaround for early PIIIs\n");
+		pr_debug("workaround for early PIIIs\n");
 		msr_lo &= 0x03c00000;
 	} else
 		msr_lo &= 0x0bc00000;
@@ -100,7 +97,7 @@ static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
 		j++;
 	}
 
-	dprintk("speed is %u\n",
+	pr_debug("speed is %u\n",
 		(msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
 
 	return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
@@ -112,7 +109,7 @@ static unsigned int pentiumM_get_frequency(void)
 	u32 msr_lo, msr_tmp;
 
 	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
-	dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+	pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
 
 	/* see table B-2 of 24547212.pdf */
 	if (msr_lo & 0x00040000) {
@@ -122,7 +119,7 @@ static unsigned int pentiumM_get_frequency(void)
 	}
 
 	msr_tmp = (msr_lo >> 22) & 0x1f;
-	dprintk("bits 22-26 are 0x%x, speed is %u\n",
+	pr_debug("bits 22-26 are 0x%x, speed is %u\n",
 			msr_tmp, (msr_tmp * 100 * 1000));
 
 	return msr_tmp * 100 * 1000;
@@ -160,11 +157,11 @@ static unsigned int pentium_core_get_frequency(void)
 	}
 
 	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
-	dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
+	pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
 			msr_lo, msr_tmp);
 
 	msr_tmp = (msr_lo >> 22) & 0x1f;
-	dprintk("bits 22-26 are 0x%x, speed is %u\n",
+	pr_debug("bits 22-26 are 0x%x, speed is %u\n",
 			msr_tmp, (msr_tmp * fsb));
 
 	ret = (msr_tmp * fsb);
@@ -190,7 +187,7 @@ static unsigned int pentium4_get_frequency(void)
 
 	rdmsr(0x2c, msr_lo, msr_hi);
 
-	dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
+	pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
 
 	/* decode the FSB: see IA-32 Intel (C) Architecture Software
 	 * Developer's Manual, Volume 3: System Prgramming Guide,
@@ -217,7 +214,7 @@ static unsigned int pentium4_get_frequency(void)
 	/* Multiplier. */
 	mult = msr_lo >> 24;
 
-	dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
+	pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
 			fsb, mult, (fsb * mult));
 
 	ret = (fsb * mult);
@@ -257,7 +254,7 @@ unsigned int speedstep_detect_processor(void)
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	u32 ebx, msr_lo, msr_hi;
 
-	dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
+	pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
 
 	if ((c->x86_vendor != X86_VENDOR_INTEL) ||
 	    ((c->x86 != 6) && (c->x86 != 0xF)))
@@ -272,7 +269,7 @@ unsigned int speedstep_detect_processor(void)
 		ebx = cpuid_ebx(0x00000001);
 		ebx &= 0x000000FF;
 
-		dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+		pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
 
 		switch (c->x86_mask) {
 		case 4:
@@ -327,7 +324,7 @@ unsigned int speedstep_detect_processor(void)
 		/* cpuid_ebx(1) is 0x04 for desktop PIII,
 		 * 0x06 for mobile PIII-M */
 		ebx = cpuid_ebx(0x00000001);
-		dprintk("ebx is %x\n", ebx);
+		pr_debug("ebx is %x\n", ebx);
 
 		ebx &= 0x000000FF;
 
@@ -344,7 +341,7 @@ unsigned int speedstep_detect_processor(void)
 		/* all mobile PIII Coppermines have FSB 100 MHz
 		 * ==> sort out a few desktop PIIIs. */
 		rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
-		dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
+		pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
 				msr_lo, msr_hi);
 		msr_lo &= 0x00c0000;
 		if (msr_lo != 0x0080000)
@@ -357,12 +354,12 @@ unsigned int speedstep_detect_processor(void)
 		 * bit 56 or 57 is set
 		 */
 		rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
-		dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
+		pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
 				msr_lo, msr_hi);
 		if ((msr_hi & (1<<18)) &&
 		    (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
 			if (c->x86_mask == 0x01) {
-				dprintk("early PIII version\n");
+				pr_debug("early PIII version\n");
 				return SPEEDSTEP_CPU_PIII_C_EARLY;
 			} else
 				return SPEEDSTEP_CPU_PIII_C;
@@ -393,14 +390,14 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 	if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
 		return -EINVAL;
 
-	dprintk("trying to determine both speeds\n");
+	pr_debug("trying to determine both speeds\n");
 
 	/* get current speed */
 	prev_speed = speedstep_get_frequency(processor);
 	if (!prev_speed)
 		return -EIO;
 
-	dprintk("previous speed is %u\n", prev_speed);
+	pr_debug("previous speed is %u\n", prev_speed);
 
 	local_irq_save(flags);
 
@@ -412,7 +409,7 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 		goto out;
 	}
 
-	dprintk("low speed is %u\n", *low_speed);
+	pr_debug("low speed is %u\n", *low_speed);
 
 	/* start latency measurement */
 	if (transition_latency)
@@ -431,7 +428,7 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 		goto out;
 	}
 
-	dprintk("high speed is %u\n", *high_speed);
+	pr_debug("high speed is %u\n", *high_speed);
 
 	if (*low_speed == *high_speed) {
 		ret = -ENODEV;
@@ -445,7 +442,7 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 	if (transition_latency) {
 		*transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC +
 			tv2.tv_usec - tv1.tv_usec;
-		dprintk("transition latency is %u uSec\n", *transition_latency);
+		pr_debug("transition latency is %u uSec\n", *transition_latency);
 
 		/* convert uSec to nSec and add 20% for safety reasons */
 		*transition_latency *= 1200;
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/drivers/cpufreq/speedstep-lib.h
index 70d9cea1219..70d9cea1219 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/drivers/cpufreq/speedstep-lib.h
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index 91bc25b67bc..c76ead3490b 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -55,9 +55,6 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
  * of DMA activity going on? */
 #define SMI_TRIES 5
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
-		"speedstep-smi", msg)
-
 /**
  * speedstep_smi_ownership
  */
@@ -70,7 +67,7 @@ static int speedstep_smi_ownership(void)
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 	magic = virt_to_phys(magic_data);
 
-	dprintk("trying to obtain ownership with command %x at port %x\n",
+	pr_debug("trying to obtain ownership with command %x at port %x\n",
 			command, smi_port);
 
 	__asm__ __volatile__(
@@ -85,7 +82,7 @@ static int speedstep_smi_ownership(void)
 		: "memory"
 	);
 
-	dprintk("result is %x\n", result);
+	pr_debug("result is %x\n", result);
 
 	return result;
 }
@@ -106,13 +103,13 @@ static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
 	u32 function = GET_SPEEDSTEP_FREQS;
 
 	if (!(ist_info.event & 0xFFFF)) {
-		dprintk("bug #1422 -- can't read freqs from BIOS\n");
+		pr_debug("bug #1422 -- can't read freqs from BIOS\n");
 		return -ENODEV;
 	}
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to determine frequencies with command %x at port %x\n",
+	pr_debug("trying to determine frequencies with command %x at port %x\n",
 			command, smi_port);
 
 	__asm__ __volatile__(
@@ -129,7 +126,7 @@ static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
 		  "d" (smi_port), "S" (0), "D" (0)
 	);
 
-	dprintk("result %x, low_freq %u, high_freq %u\n",
+	pr_debug("result %x, low_freq %u, high_freq %u\n",
 			result, low_mhz, high_mhz);
 
 	/* abort if results are obviously incorrect... */
@@ -154,7 +151,7 @@ static int speedstep_get_state(void)
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to determine current setting with command %x "
+	pr_debug("trying to determine current setting with command %x "
 		"at port %x\n", command, smi_port);
 
 	__asm__ __volatile__(
@@ -168,7 +165,7 @@ static int speedstep_get_state(void)
 		  "d" (smi_port), "S" (0), "D" (0)
 	);
 
-	dprintk("state is %x, result is %x\n", state, result);
+	pr_debug("state is %x, result is %x\n", state, result);
 
 	return state & 1;
 }
@@ -194,13 +191,13 @@ static void speedstep_set_state(unsigned int state)
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to set frequency to state %u "
+	pr_debug("trying to set frequency to state %u "
 		"with command %x at port %x\n",
 		state, command, smi_port);
 
 	do {
 		if (retry) {
-			dprintk("retry %u, previous result %u, waiting...\n",
+			pr_debug("retry %u, previous result %u, waiting...\n",
 					retry, result);
 			mdelay(retry * 50);
 		}
@@ -221,7 +218,7 @@ static void speedstep_set_state(unsigned int state)
 	local_irq_restore(flags);
 
 	if (new_state == state)
-		dprintk("change to %u MHz succeeded after %u tries "
+		pr_debug("change to %u MHz succeeded after %u tries "
 			"with result %u\n",
 			(speedstep_freqs[new_state].frequency / 1000),
 			retry, result);
@@ -292,7 +289,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 
 	result = speedstep_smi_ownership();
 	if (result) {
-		dprintk("fails in acquiring ownership of a SMI interface.\n");
+		pr_debug("fails in acquiring ownership of a SMI interface.\n");
 		return -EINVAL;
 	}
 
@@ -304,7 +301,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 	if (result) {
 		/* fall back to speedstep_lib.c dection mechanism:
 		 * try both states out */
-		dprintk("could not detect low and high frequencies "
+		pr_debug("could not detect low and high frequencies "
 				"by SMI call.\n");
 		result = speedstep_get_freqs(speedstep_processor,
 				low, high,
@@ -312,18 +309,18 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 				&speedstep_set_state);
 
 		if (result) {
-			dprintk("could not detect two different speeds"
+			pr_debug("could not detect two different speeds"
 					" -- aborting.\n");
 			return result;
 		} else
-			dprintk("workaround worked.\n");
+			pr_debug("workaround worked.\n");
 	}
 
 	/* get current speed setting */
 	state = speedstep_get_state();
 	speed = speedstep_freqs[state].frequency;
 
-	dprintk("currently at %s speed setting - %i MHz\n",
+	pr_debug("currently at %s speed setting - %i MHz\n",
 		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
 		? "low" : "high",
 		(speed / 1000));
@@ -360,7 +357,7 @@ static int speedstep_resume(struct cpufreq_policy *policy)
 	int result = speedstep_smi_ownership();
 
 	if (result)
-		dprintk("fails in re-acquiring ownership of a SMI interface.\n");
+		pr_debug("fails in re-acquiring ownership of a SMI interface.\n");
 
 	return result;
 }
@@ -403,12 +400,12 @@ static int __init speedstep_init(void)
 	}
 
 	if (!speedstep_processor) {
-		dprintk("No supported Intel CPU detected.\n");
+		pr_debug("No supported Intel CPU detected.\n");
 		return -ENODEV;
 	}
 
-	dprintk("signature:0x%.8lx, command:0x%.8lx, "
-		"event:0x%.8lx, perf_level:0x%.8lx.\n",
+	pr_debug("signature:0x%.8ulx, command:0x%.8ulx, "
+		"event:0x%.8ulx, perf_level:0x%.8ulx.\n",
 		ist_info.signature, ist_info.command,
 		ist_info.event, ist_info.perf_level);
 
diff --git a/drivers/crypto/amcc/crypto4xx_sa.c b/drivers/crypto/amcc/crypto4xx_sa.c
index 466fd94cd4a..de8a7a48775 100644
--- a/drivers/crypto/amcc/crypto4xx_sa.c
+++ b/drivers/crypto/amcc/crypto4xx_sa.c
@@ -17,7 +17,7 @@
  * @file crypto4xx_sa.c
  *
  * This file implements the security context
- * assoicate format.
+ * associate format.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/crypto/amcc/crypto4xx_sa.h b/drivers/crypto/amcc/crypto4xx_sa.h
index 4b83ed7e557..1352d58d4e3 100644
--- a/drivers/crypto/amcc/crypto4xx_sa.h
+++ b/drivers/crypto/amcc/crypto4xx_sa.h
@@ -15,7 +15,7 @@
  * GNU General Public License for more details.
  *
  * This file defines the security context
- * assoicate format.
+ * associate format.
  */
 
 #ifndef __CRYPTO4XX_SA_H__
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 0d662213c06..4c20c5bf605 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -1044,7 +1044,7 @@ static int aead_perform(struct aead_request *req, int encrypt,
 	memcpy(crypt->iv, req->iv, ivsize);
 
 	if (req->src != req->dst) {
-		BUG(); /* -ENOTSUP because of my lazyness */
+		BUG(); /* -ENOTSUP because of my laziness */
 	}
 
 	/* ASSOC data */
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 3d7d705f026..235f53bf494 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -167,7 +167,7 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
 /**
  * atc_assign_cookie - compute and assign new cookie
  * @atchan: channel we work on
- * @desc: descriptor to asign cookie for
+ * @desc: descriptor to assign cookie for
  *
  * Called with atchan->lock held and bh disabled
  */
diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index 00deabd9a04..f48e5400651 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -529,7 +529,7 @@ static void coh901318_pause(struct dma_chan *chan)
 	val = readl(virtbase + COH901318_CX_CFG +
 		    COH901318_CX_CFG_SPACING * channel);
 
-	/* Stopping infinit transfer */
+	/* Stopping infinite transfer */
 	if ((val & COH901318_CX_CTRL_TC_ENABLE) == 0 &&
 	    (val & COH901318_CX_CFG_CH_ENABLE))
 		cohc->stopped = 1;
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 6b396759e7f..8a781540590 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -1448,7 +1448,7 @@ static const struct of_device_id fsldma_of_ids[] = {
 	{}
 };
 
-static struct of_platform_driver fsldma_of_driver = {
+static struct platform_driver fsldma_of_driver = {
 	.driver = {
 		.name = "fsl-elo-dma",
 		.owner = THIS_MODULE,
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 798f46a4590..3d4ec38b9b6 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -911,8 +911,8 @@ static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan)
 
 /**
  * midc_handle_error -	Handle DMA txn error
- * @mid: controller where error occured
- * @midc: chan where error occured
+ * @mid: controller where error occurred
+ * @midc: chan where error occurred
  *
  * Scan the descriptor for error
  */
@@ -1099,7 +1099,7 @@ static int mid_setup_dma(struct pci_dev *pdev)
 		dma->mask_reg = ioremap(LNW_PERIPHRAL_MASK_BASE,
 					LNW_PERIPHRAL_MASK_SIZE);
 		if (dma->mask_reg == NULL) {
-			pr_err("ERR_MDMA:Cant map periphral intr space !!\n");
+			pr_err("ERR_MDMA:Can't map periphral intr space !!\n");
 			return -ENOMEM;
 		}
 	} else
@@ -1373,7 +1373,7 @@ int dma_resume(struct pci_dev *pci)
 	pci_restore_state(pci);
 	ret = pci_enable_device(pci);
 	if (ret) {
-		pr_err("MDMA: device cant be enabled for %x\n", pci->device);
+		pr_err("MDMA: device can't be enabled for %x\n", pci->device);
 		return ret;
 	}
 	device->state = RUNNING;
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
index 709fecbdde7..aea5ee88ce0 100644
--- a/drivers/dma/intel_mid_dma_regs.h
+++ b/drivers/dma/intel_mid_dma_regs.h
@@ -174,8 +174,8 @@ union intel_mid_dma_cfg_hi {
  * @dma: dma device struture pointer
  * @busy: bool representing if ch is busy (active txn) or not
  * @in_use: bool representing if ch is in use or not
- * @raw_tfr: raw trf interrupt recieved
- * @raw_block: raw block interrupt recieved
+ * @raw_tfr: raw trf interrupt received
+ * @raw_block: raw block interrupt received
  */
 struct intel_mid_dma_chan {
 	struct dma_chan		chan;
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 4f95d31f5a2..b9bae94f201 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -328,7 +328,7 @@ static irqreturn_t mpc_dma_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-/* proccess completed descriptors */
+/* process completed descriptors */
 static void mpc_dma_process_completed(struct mpc_dma *mdma)
 {
 	dma_cookie_t last_cookie = 0;
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index 6451b581a70..d50da41ac32 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -865,7 +865,12 @@ static unsigned int sh_dmae_reset(struct sh_dmae_device *shdev)
 
 static irqreturn_t sh_dmae_err(int irq, void *data)
 {
-	return IRQ_RETVAL(sh_dmae_reset(data));
+	struct sh_dmae_device *shdev = data;
+
+	if (dmaor_read(shdev) & DMAOR_AE)
+		return IRQ_RETVAL(sh_dmae_reset(data));
+	else
+		return IRQ_NONE;
 }
 
 static void dmae_do_tasklet(unsigned long data)
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index af955de035f..94ee15dd3ae 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -90,7 +90,7 @@ struct d40_lli_pool {
  * @lli_log: Same as above but for logical channels.
  * @lli_pool: The pool with two entries pre-allocated.
  * @lli_len: Number of llis of current descriptor.
- * @lli_current: Number of transfered llis.
+ * @lli_current: Number of transferred llis.
  * @lcla_alloc: Number of LCLA entries allocated.
  * @txd: DMA engine struct. Used for among other things for communication
  * during a transfer.
@@ -1214,7 +1214,7 @@ static void dma_tasklet(unsigned long data)
 	return;
 
  err:
-	/* Rescue manouver if receiving double interrupts */
+	/* Rescue manoeuvre if receiving double interrupts */
 	if (d40c->pending_tx > 0)
 		d40c->pending_tx--;
 	spin_unlock_irqrestore(&d40c->lock, flags);
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index fac1a2002e6..af1a17d42bd 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -45,7 +45,7 @@ config EDAC_DECODE_MCE
 	default y
 	---help---
 	  Enable this option if you want to decode Machine Check Exceptions
-	  occuring on your machine in human-readable form.
+	  occurring on your machine in human-readable form.
 
 	  You should definitely say Y here in case you want to decode MCEs
 	  which occur really early upon boot, before the module infrastructure
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 31e71c4fc83..9a8bebcf6b1 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -211,8 +211,6 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci)
 
 	scrubval = scrubval & 0x001F;
 
-	amd64_debug("pci-read, sdram scrub control value: %d\n", scrubval);
-
 	for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
 		if (scrubrates[i].scrubval == scrubval) {
 			retval = scrubrates[i].bandwidth;
@@ -933,25 +931,74 @@ static int k8_early_channel_count(struct amd64_pvt *pvt)
 /* On F10h and later ErrAddr is MC4_ADDR[47:1] */
 static u64 get_error_address(struct mce *m)
 {
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+	u64 addr;
 	u8 start_bit = 1;
 	u8 end_bit   = 47;
 
-	if (boot_cpu_data.x86 == 0xf) {
+	if (c->x86 == 0xf) {
 		start_bit = 3;
 		end_bit   = 39;
 	}
 
-	return m->addr & GENMASK(start_bit, end_bit);
+	addr = m->addr & GENMASK(start_bit, end_bit);
+
+	/*
+	 * Erratum 637 workaround
+	 */
+	if (c->x86 == 0x15) {
+		struct amd64_pvt *pvt;
+		u64 cc6_base, tmp_addr;
+		u32 tmp;
+		u8 mce_nid, intlv_en;
+
+		if ((addr & GENMASK(24, 47)) >> 24 != 0x00fdf7)
+			return addr;
+
+		mce_nid	= amd_get_nb_id(m->extcpu);
+		pvt	= mcis[mce_nid]->pvt_info;
+
+		amd64_read_pci_cfg(pvt->F1, DRAM_LOCAL_NODE_LIM, &tmp);
+		intlv_en = tmp >> 21 & 0x7;
+
+		/* add [47:27] + 3 trailing bits */
+		cc6_base  = (tmp & GENMASK(0, 20)) << 3;
+
+		/* reverse and add DramIntlvEn */
+		cc6_base |= intlv_en ^ 0x7;
+
+		/* pin at [47:24] */
+		cc6_base <<= 24;
+
+		if (!intlv_en)
+			return cc6_base | (addr & GENMASK(0, 23));
+
+		amd64_read_pci_cfg(pvt->F1, DRAM_LOCAL_NODE_BASE, &tmp);
+
+							/* faster log2 */
+		tmp_addr  = (addr & GENMASK(12, 23)) << __fls(intlv_en + 1);
+
+		/* OR DramIntlvSel into bits [14:12] */
+		tmp_addr |= (tmp & GENMASK(21, 23)) >> 9;
+
+		/* add remaining [11:0] bits from original MC4_ADDR */
+		tmp_addr |= addr & GENMASK(0, 11);
+
+		return cc6_base | tmp_addr;
+	}
+
+	return addr;
 }
 
 static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
 {
+	struct cpuinfo_x86 *c = &boot_cpu_data;
 	int off = range << 3;
 
 	amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off,  &pvt->ranges[range].base.lo);
 	amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo);
 
-	if (boot_cpu_data.x86 == 0xf)
+	if (c->x86 == 0xf)
 		return;
 
 	if (!dram_rw(pvt, range))
@@ -959,6 +1006,31 @@ static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
 
 	amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off,  &pvt->ranges[range].base.hi);
 	amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi);
+
+	/* Factor in CC6 save area by reading dst node's limit reg */
+	if (c->x86 == 0x15) {
+		struct pci_dev *f1 = NULL;
+		u8 nid = dram_dst_node(pvt, range);
+		u32 llim;
+
+		f1 = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0x18 + nid, 1));
+		if (WARN_ON(!f1))
+			return;
+
+		amd64_read_pci_cfg(f1, DRAM_LOCAL_NODE_LIM, &llim);
+
+		pvt->ranges[range].lim.lo &= GENMASK(0, 15);
+
+					    /* {[39:27],111b} */
+		pvt->ranges[range].lim.lo |= ((llim & 0x1fff) << 3 | 0x7) << 16;
+
+		pvt->ranges[range].lim.hi &= GENMASK(0, 7);
+
+					    /* [47:40] */
+		pvt->ranges[range].lim.hi |= llim >> 13;
+
+		pci_dev_put(f1);
+	}
 }
 
 static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
@@ -1403,12 +1475,8 @@ static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
 		return -EINVAL;
 	}
 
-	if (intlv_en &&
-	    (intlv_sel != ((sys_addr >> 12) & intlv_en))) {
-		amd64_warn("Botched intlv bits, en: 0x%x, sel: 0x%x\n",
-			   intlv_en, intlv_sel);
+	if (intlv_en && (intlv_sel != ((sys_addr >> 12) & intlv_en)))
 		return -EINVAL;
-	}
 
 	sys_addr = f1x_swap_interleaved_region(pvt, sys_addr);
 
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 11be36a311e..9a666cb985b 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -196,6 +196,9 @@
 
 #define DCT_CFG_SEL			0x10C
 
+#define DRAM_LOCAL_NODE_BASE		0x120
+#define DRAM_LOCAL_NODE_LIM		0x124
+
 #define DRAM_BASE_HI			0x140
 #define DRAM_LIMIT_HI			0x144
 
diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c
index b9a781c47e3..837ad8f85b4 100644
--- a/drivers/edac/cpc925_edac.c
+++ b/drivers/edac/cpc925_edac.c
@@ -817,7 +817,7 @@ static void cpc925_del_edac_devices(void)
 	}
 }
 
-/* Convert current back-ground scrub rate into byte/sec bandwith */
+/* Convert current back-ground scrub rate into byte/sec bandwidth */
 static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci)
 {
 	struct cpc925_mc_pdata *pdata = mci->pvt_info;
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 3d965347a67..eefa3501916 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -164,7 +164,7 @@ enum mem_type {
 /* chipset Error Detection and Correction capabilities and mode */
 enum edac_type {
 	EDAC_UNKNOWN = 0,	/* Unknown if ECC is available */
-	EDAC_NONE,		/* Doesnt support ECC */
+	EDAC_NONE,		/* Doesn't support ECC */
 	EDAC_RESERVED,		/* Reserved ECC type */
 	EDAC_PARITY,		/* Detects parity errors */
 	EDAC_EC,		/* Error Checking - no correction */
@@ -233,7 +233,7 @@ enum scrub_type {
  *			of these in parallel provides 64 bits which is common
  *			for a memory stick.
  *
- * Memory Stick:	A printed circuit board that agregates multiple
+ * Memory Stick:	A printed circuit board that aggregates multiple
  *			memory devices in parallel.  This is the atomic
  *			memory component that is purchaseable by Joe consumer
  *			and loaded into a memory socket.
@@ -385,7 +385,7 @@ struct mem_ctl_info {
 
 	/* Get the current sdram memory scrub rate from the internal
 	   representation and converts it to the closest matching
-	   bandwith in bytes/sec.
+	   bandwidth in bytes/sec.
 	 */
 	int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
 
@@ -823,7 +823,7 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci,
  * There are a limited number of error logging registers that can
  * be exausted.  When all registers are exhausted and an additional
  * error occurs then an error overflow register records that an
- * error occured and the type of error, but doesn't have any
+ * error occurred and the type of error, but doesn't have any
  * further information.  The ce/ue versions make for cleaner
  * reporting logic and function interface - reduces conditional
  * statement clutter and extra function arguments.
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index d5e13c94714..a7408cf86f3 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -672,7 +672,7 @@ void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev,
 		block->counters.ce_count++;
 	}
 
-	/* Propogate the count up the 'totals' tree */
+	/* Propagate the count up the 'totals' tree */
 	instance->counters.ce_count++;
 	edac_dev->counters.ce_count++;
 
@@ -718,7 +718,7 @@ void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev,
 		block->counters.ue_count++;
 	}
 
-	/* Propogate the count up the 'totals' tree */
+	/* Propagate the count up the 'totals' tree */
 	instance->counters.ue_count++;
 	edac_dev->counters.ue_count++;
 
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 400de071cab..86649df0028 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -533,7 +533,7 @@ static int edac_device_create_block(struct edac_device_ctl_info *edac_dev,
 	memset(&block->kobj, 0, sizeof(struct kobject));
 
 	/* bump the main kobject's reference count for this controller
-	 * and this instance is dependant on the main
+	 * and this instance is dependent on the main
 	 */
 	main_kobj = kobject_get(&edac_dev->kobj);
 	if (!main_kobj) {
@@ -635,7 +635,7 @@ static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev,
 	instance->ctl = edac_dev;
 
 	/* bump the main kobject's reference count for this controller
-	 * and this instance is dependant on the main
+	 * and this instance is dependent on the main
 	 */
 	main_kobj = kobject_get(&edac_dev->kobj);
 	if (!main_kobj) {
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index a4e9db2d652..1d805604907 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -724,7 +724,7 @@ void edac_mc_handle_ce(struct mem_ctl_info *mci,
 		 * Some MC's can remap memory so that it is still available
 		 * at a different address when PCI devices map into memory.
 		 * MC's that can't do this lose the memory where PCI devices
-		 * are mapped.  This mapping is MC dependant and so we call
+		 * are mapped.  This mapping is MC dependent and so we call
 		 * back into the MC driver for it to map the MC page to
 		 * a physical (CPU) page which can then be mapped to a virtual
 		 * page - which can then be scrubbed.
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 73196f7b722..29ffa350bfb 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -458,13 +458,13 @@ static ssize_t mci_sdram_scrub_rate_store(struct mem_ctl_info *mci,
 		return -EINVAL;
 
 	new_bw = mci->set_sdram_scrub_rate(mci, bandwidth);
-	if (new_bw >= 0) {
-		edac_printk(KERN_DEBUG, EDAC_MC, "Scrub rate set to %d\n", new_bw);
-		return count;
+	if (new_bw < 0) {
+		edac_printk(KERN_WARNING, EDAC_MC,
+			    "Error setting scrub rate to: %lu\n", bandwidth);
+		return -EINVAL;
 	}
 
-	edac_printk(KERN_DEBUG, EDAC_MC, "Error setting scrub rate to: %lu\n", bandwidth);
-	return -EINVAL;
+	return count;
 }
 
 /*
@@ -483,7 +483,6 @@ static ssize_t mci_sdram_scrub_rate_show(struct mem_ctl_info *mci, char *data)
 		return bandwidth;
 	}
 
-	edac_printk(KERN_DEBUG, EDAC_MC, "Read scrub rate: %d\n", bandwidth);
 	return sprintf(data, "%d\n", bandwidth);
 }
 
@@ -850,7 +849,7 @@ static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci,
 
 	/*
 	 * loop if there are attributes and until we hit a NULL entry
-	 * Remove first all the atributes
+	 * Remove first all the attributes
 	 */
 	while (sysfs_attrib) {
 		debugf4("%s() sysfs_attrib = %p\n",__func__, sysfs_attrib);
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index 023b01cb517..495198ad059 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -352,7 +352,7 @@ static int edac_pci_main_kobj_setup(void)
 		return 0;
 
 	/* First time, so create the main kobject and its
-	 * controls and atributes
+	 * controls and attributes
 	 */
 	edac_class = edac_get_sysfs_class();
 	if (edac_class == NULL) {
@@ -551,7 +551,7 @@ static void edac_pci_dev_parity_clear(struct pci_dev *dev)
 /*
  *  PCI Parity polling
  *
- *	Fucntion to retrieve the current parity status
+ *	Function to retrieve the current parity status
  *	and decode it
  *
  */
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index a5cefab8d65..87f427c2ce5 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1372,7 +1372,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx)
 	 * actual number of slots/dimms per channel, we thus utilize the
 	 * resource as specified by the chipset. Thus, we might have
 	 * have more DIMMs per channel than actually on the mobo, but this
-	 * allows the driver to support upto the chipset max, without
+	 * allows the driver to support up to the chipset max, without
 	 * some fancy mobo determination.
 	 */
 	i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index 0448da0af75..bcbdeeca48b 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -11,7 +11,7 @@
  *
  * The intel 5100 has two independent channels. EDAC core currently
  * can not reflect this configuration so instead the chip-select
- * rows for each respective channel are layed out one after another,
+ * rows for each respective channel are laid out one after another,
  * the first half belonging to channel 0, the second half belonging
  * to channel 1.
  */
diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
index 38a9be9e1c7..80a465efbae 100644
--- a/drivers/edac/i5400_edac.c
+++ b/drivers/edac/i5400_edac.c
@@ -648,7 +648,7 @@ static void i5400_process_nonfatal_error_info(struct mem_ctl_info *mci,
 		return;
 	}
 
-	/* Miscelaneous errors */
+	/* Miscellaneous errors */
 	errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));
 
 	branch = extract_fbdchan_indx(info->ferr_nf_fbd);
@@ -1240,7 +1240,7 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx)
 	 * actual number of slots/dimms per channel, we thus utilize the
 	 * resource as specified by the chipset. Thus, we might have
 	 * have more DIMMs per channel than actually on the mobo, but this
-	 * allows the driver to support upto the chipset max, without
+	 * allows the driver to support up to the chipset max, without
 	 * some fancy mobo determination.
 	 */
 	num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL;
diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
index 76d1f576cdc..363cc160294 100644
--- a/drivers/edac/i7300_edac.c
+++ b/drivers/edac/i7300_edac.c
@@ -1065,7 +1065,7 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
 	 * actual number of slots/dimms per channel, we thus utilize the
 	 * resource as specified by the chipset. Thus, we might have
 	 * have more DIMMs per channel than actually on the mobo, but this
-	 * allows the driver to support upto the chipset max, without
+	 * allows the driver to support up to the chipset max, without
 	 * some fancy mobo determination.
 	 */
 	num_dimms_per_channel = MAX_SLOTS;
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 81154ab296b..465cbc25149 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1772,7 +1772,7 @@ static void i7core_check_error(struct mem_ctl_info *mci)
 	/*
 	 * MCE first step: Copy all mce errors into a temporary buffer
 	 * We use a double buffering here, to reduce the risk of
-	 * loosing an error.
+	 * losing an error.
 	 */
 	smp_rmb();
 	count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
index 678405ab04e..4329d39f902 100644
--- a/drivers/edac/i82443bxgx_edac.c
+++ b/drivers/edac/i82443bxgx_edac.c
@@ -203,7 +203,7 @@ static void i82443bxgx_init_csrows(struct mem_ctl_info *mci,
 		row_high_limit = ((u32) drbar << 23);
 		/* find the DRAM Chip Select Base address and mask */
 		debugf1("MC%d: %s: %s() Row=%d, "
-			"Boundry Address=%#0x, Last = %#0x\n",
+			"Boundary Address=%#0x, Last = %#0x\n",
 			mci->mc_idx, __FILE__, __func__, index, row_high_limit,
 			row_high_limit_last);
 
@@ -305,7 +305,7 @@ static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx)
 	i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);
 
 	/* Many BIOSes don't clear error flags on boot, so do this
-	 * here, or we get "phantom" errors occuring at module-load
+	 * here, or we get "phantom" errors occurring at module-load
 	 * time. */
 	pci_write_bits32(pdev, I82443BXGX_EAP,
 			(I82443BXGX_EAP_OFFSET_SBE |
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index 733a7e7a8d6..a4987e03f59 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -90,7 +90,7 @@ static ssize_t edac_inject_bank_store(struct kobject *kobj,
 
 	if (value > 5)
 		if (boot_cpu_data.x86 != 0x15 || value > 6) {
-			printk(KERN_ERR "Non-existant MCE bank: %lu\n", value);
+			printk(KERN_ERR "Non-existent MCE bank: %lu\n", value);
 			return -EINVAL;
 		}
 
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index ffb5ad080be..38ab8e2cd7f 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -1147,13 +1147,14 @@ static struct platform_driver mpc85xx_mc_err_driver = {
 static void __init mpc85xx_mc_clear_rfxe(void *data)
 {
 	orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1);
-	mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~0x20000));
+	mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~HID1_RFXE));
 }
 #endif
 
 static int __init mpc85xx_mc_init(void)
 {
 	int res = 0;
+	u32 pvr = 0;
 
 	printk(KERN_INFO "Freescale(R) MPC85xx EDAC driver, "
 	       "(C) 2006 Montavista Software\n");
@@ -1183,12 +1184,17 @@ static int __init mpc85xx_mc_init(void)
 #endif
 
 #ifdef CONFIG_FSL_SOC_BOOKE
-	/*
-	 * need to clear HID1[RFXE] to disable machine check int
-	 * so we can catch it
-	 */
-	if (edac_op_state == EDAC_OPSTATE_INT)
-		on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0);
+	pvr = mfspr(SPRN_PVR);
+
+	if ((PVR_VER(pvr) == PVR_VER_E500V1) ||
+	    (PVR_VER(pvr) == PVR_VER_E500V2)) {
+		/*
+		 * need to clear HID1[RFXE] to disable machine check int
+		 * so we can catch it
+		 */
+		if (edac_op_state == EDAC_OPSTATE_INT)
+			on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0);
+	}
 #endif
 
 	return 0;
@@ -1206,7 +1212,12 @@ static void __exit mpc85xx_mc_restore_hid1(void *data)
 static void __exit mpc85xx_mc_exit(void)
 {
 #ifdef CONFIG_FSL_SOC_BOOKE
-	on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
+	u32 pvr = mfspr(SPRN_PVR);
+
+	if ((PVR_VER(pvr) == PVR_VER_E500V1) ||
+	    (PVR_VER(pvr) == PVR_VER_E500V2)) {
+		on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
+	}
 #endif
 #ifdef CONFIG_PCI
 	platform_driver_unregister(&mpc85xx_pci_err_driver);
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index c1f0045ceb8..af8e7b1aa29 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -1019,7 +1019,7 @@ ppc4xx_edac_mc_init(struct mem_ctl_info *mci,
 	struct ppc4xx_edac_pdata *pdata = NULL;
 	const struct device_node *np = op->dev.of_node;
 
-	if (op->dev.of_match == NULL)
+	if (of_match_device(ppc4xx_edac_match, &op->dev) == NULL)
 		return -EINVAL;
 
 	/* Initial driver pointers and private data */
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
index 6a822c631ef..678513738c3 100644
--- a/drivers/edac/r82600_edac.c
+++ b/drivers/edac/r82600_edac.c
@@ -120,7 +120,7 @@
 				 *        write 0=NOP
 				 */
 
-#define R82600_DRBA	0x60	/* + 0x60..0x63 SDRAM Row Boundry Address
+#define R82600_DRBA	0x60	/* + 0x60..0x63 SDRAM Row Boundary Address
 				 *  Registers
 				 *
 				 * 7:0  Address lines 30:24 - upper limit of
@@ -217,7 +217,7 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
 {
 	struct csrow_info *csrow;
 	int index;
-	u8 drbar;		/* SDRAM Row Boundry Address Register */
+	u8 drbar;		/* SDRAM Row Boundary Address Register */
 	u32 row_high_limit, row_high_limit_last;
 	u32 reg_sdram, ecc_on, row_base;
 
@@ -236,7 +236,7 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
 		row_high_limit = ((u32) drbar << 24);
 /*		row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
 
-		debugf1("%s() Row=%d, Boundry Address=%#0x, Last = %#0x\n",
+		debugf1("%s() Row=%d, Boundary Address=%#0x, Last = %#0x\n",
 			__func__, index, row_high_limit, row_high_limit_last);
 
 		/* Empty row [p.57] */
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 7ed08fd1214..3f04dd3681c 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -453,7 +453,7 @@ static bool fwnet_pd_update(struct fwnet_peer *peer,
 	memcpy(pd->pbuf + frag_off, frag_buf, frag_len);
 
 	/*
-	 * Move list entry to beginnig of list so that oldest partial
+	 * Move list entry to beginning of list so that oldest partial
 	 * datagrams percolate to the end of the list
 	 */
 	list_move_tail(&pd->pd_link, &peer->pd_list);
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index f903d7b6f34..23d1468ad25 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -2199,7 +2199,6 @@ static int ohci_set_config_rom(struct fw_card *card,
 {
 	struct fw_ohci *ohci;
 	unsigned long flags;
-	int ret = -EBUSY;
 	__be32 *next_config_rom;
 	dma_addr_t uninitialized_var(next_config_rom_bus);
 
@@ -2240,22 +2239,37 @@ static int ohci_set_config_rom(struct fw_card *card,
 
 	spin_lock_irqsave(&ohci->lock, flags);
 
+	/*
+	 * If there is not an already pending config_rom update,
+	 * push our new allocation into the ohci->next_config_rom
+	 * and then mark the local variable as null so that we
+	 * won't deallocate the new buffer.
+	 *
+	 * OTOH, if there is a pending config_rom update, just
+	 * use that buffer with the new config_rom data, and
+	 * let this routine free the unused DMA allocation.
+	 */
+
 	if (ohci->next_config_rom == NULL) {
 		ohci->next_config_rom = next_config_rom;
 		ohci->next_config_rom_bus = next_config_rom_bus;
+		next_config_rom = NULL;
+	}
 
-		copy_config_rom(ohci->next_config_rom, config_rom, length);
+	copy_config_rom(ohci->next_config_rom, config_rom, length);
 
-		ohci->next_header = config_rom[0];
-		ohci->next_config_rom[0] = 0;
+	ohci->next_header = config_rom[0];
+	ohci->next_config_rom[0] = 0;
 
-		reg_write(ohci, OHCI1394_ConfigROMmap,
-			  ohci->next_config_rom_bus);
-		ret = 0;
-	}
+	reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
 
 	spin_unlock_irqrestore(&ohci->lock, flags);
 
+	/* If we didn't use the DMA allocation, delete it. */
+	if (next_config_rom != NULL)
+		dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+				  next_config_rom, next_config_rom_bus);
+
 	/*
 	 * Now initiate a bus reset to have the changes take
 	 * effect. We clean up the old config rom memory and DMA
@@ -2263,13 +2277,10 @@ static int ohci_set_config_rom(struct fw_card *card,
 	 * controller could need to access it before the bus reset
 	 * takes effect.
 	 */
-	if (ret == 0)
-		fw_schedule_bus_reset(&ohci->card, true, true);
-	else
-		dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
-				  next_config_rom, next_config_rom_bus);
 
-	return ret;
+	fw_schedule_bus_reset(&ohci->card, true, true);
+
+	return 0;
 }
 
 static void ohci_send_request(struct fw_card *card, struct fw_packet *packet)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b3a25a55ba2..efba163595d 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -157,4 +157,6 @@ config SIGMA
 	  If unsure, say N here.  Drivers that need these helpers will select
 	  this option automatically.
 
+source "drivers/firmware/google/Kconfig"
+
 endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 00bb0b80a79..47338c97912 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -13,3 +13,5 @@ obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_SIGMA)		+= sigma.o
+
+obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 96c25d93eed..f1b7f659d3c 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -531,8 +531,8 @@ static int
 edd_has_edd30(struct edd_device *edev)
 {
 	struct edd_info *info;
-	int i, nonzero_path = 0;
-	char c;
+	int i;
+	u8 csum = 0;
 
 	if (!edev)
 		return 0;
@@ -544,16 +544,16 @@ edd_has_edd30(struct edd_device *edev)
 		return 0;
 	}
 
-	for (i = 30; i <= 73; i++) {
-		c = *(((uint8_t *) info) + i + 4);
-		if (c) {
-			nonzero_path++;
-			break;
-		}
-	}
-	if (!nonzero_path) {
+
+	/* We support only T13 spec */
+	if (info->params.device_path_info_length != 44)
+		return 0;
+
+	for (i = 30; i < info->params.device_path_info_length + 30; i++)
+		csum += *(((u8 *)&info->params) + i);
+
+	if (csum)
 		return 0;
-	}
 
 	return 1;
 }
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index ff0c373e3bb..a2d2f1f0d4f 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -677,8 +677,8 @@ create_efivars_bin_attributes(struct efivars *efivars)
 
 	return 0;
 out_free:
-	kfree(efivars->new_var);
-	efivars->new_var = NULL;
+	kfree(efivars->del_var);
+	efivars->del_var = NULL;
 	kfree(efivars->new_var);
 	efivars->new_var = NULL;
 	return error;
@@ -803,6 +803,8 @@ efivars_init(void)
 	ops.set_variable = efi.set_variable;
 	ops.get_next_variable = efi.get_next_variable;
 	error = register_efivars(&__efivars, &ops, efi_kobj);
+	if (error)
+		goto err_put;
 
 	/* Don't forget the systab entry */
 	error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group);
@@ -810,18 +812,25 @@ efivars_init(void)
 		printk(KERN_ERR
 		       "efivars: Sysfs attribute export failed with error %d.\n",
 		       error);
-		unregister_efivars(&__efivars);
-		kobject_put(efi_kobj);
+		goto err_unregister;
 	}
 
+	return 0;
+
+err_unregister:
+	unregister_efivars(&__efivars);
+err_put:
+	kobject_put(efi_kobj);
 	return error;
 }
 
 static void __exit
 efivars_exit(void)
 {
-	unregister_efivars(&__efivars);
-	kobject_put(efi_kobj);
+	if (efi_enabled) {
+		unregister_efivars(&__efivars);
+		kobject_put(efi_kobj);
+	}
 }
 
 module_init(efivars_init);
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
new file mode 100644
index 00000000000..87096b6ca5c
--- /dev/null
+++ b/drivers/firmware/google/Kconfig
@@ -0,0 +1,31 @@
+config GOOGLE_FIRMWARE
+	bool "Google Firmware Drivers"
+	depends on X86
+	default n
+	help
+	  These firmware drivers are used by Google's servers.  They are
+	  only useful if you are working directly on one of their
+	  proprietary servers.  If in doubt, say "N".
+
+menu "Google Firmware Drivers"
+	depends on GOOGLE_FIRMWARE
+
+config GOOGLE_SMI
+	tristate "SMI interface for Google platforms"
+	depends on ACPI && DMI
+	select EFI_VARS
+	help
+	  Say Y here if you want to enable SMI callbacks for Google
+	  platforms.  This provides an interface for writing to and
+	  clearing the EFI event log and reading and writing NVRAM
+	  variables.
+
+config GOOGLE_MEMCONSOLE
+	tristate "Firmware Memory Console"
+	depends on DMI
+	help
+	  This option enables the kernel to search for a firmware log in
+	  the EBDA on Google servers.  If found, this log is exported to
+	  userland in the file /sys/firmware/log.
+
+endmenu
diff --git a/drivers/firmware/google/Makefile b/drivers/firmware/google/Makefile
new file mode 100644
index 00000000000..54a294e3cb6
--- /dev/null
+++ b/drivers/firmware/google/Makefile
@@ -0,0 +1,3 @@
+
+obj-$(CONFIG_GOOGLE_SMI)		+= gsmi.o
+obj-$(CONFIG_GOOGLE_MEMCONSOLE)		+= memconsole.o
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
new file mode 100644
index 00000000000..fa7f0b3e81d
--- /dev/null
+++ b/drivers/firmware/google/gsmi.c
@@ -0,0 +1,940 @@
+/*
+ * Copyright 2010 Google Inc. All Rights Reserved.
+ * Author: dlaurie@google.com (Duncan Laurie)
+ *
+ * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison)
+ *
+ * EFI SMI interface for Google platforms
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/ioctl.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/dmi.h>
+#include <linux/kdebug.h>
+#include <linux/reboot.h>
+#include <linux/efi.h>
+
+#define GSMI_SHUTDOWN_CLEAN	0	/* Clean Shutdown */
+/* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
+#define GSMI_SHUTDOWN_NMIWDT	1	/* NMI Watchdog */
+#define GSMI_SHUTDOWN_PANIC	2	/* Panic */
+#define GSMI_SHUTDOWN_OOPS	3	/* Oops */
+#define GSMI_SHUTDOWN_DIE	4	/* Die -- No longer meaningful */
+#define GSMI_SHUTDOWN_MCE	5	/* Machine Check */
+#define GSMI_SHUTDOWN_SOFTWDT	6	/* Software Watchdog */
+#define GSMI_SHUTDOWN_MBE	7	/* Uncorrected ECC */
+#define GSMI_SHUTDOWN_TRIPLE	8	/* Triple Fault */
+
+#define DRIVER_VERSION		"1.0"
+#define GSMI_GUID_SIZE		16
+#define GSMI_BUF_SIZE		1024
+#define GSMI_BUF_ALIGN		sizeof(u64)
+#define GSMI_CALLBACK		0xef
+
+/* SMI return codes */
+#define GSMI_SUCCESS		0x00
+#define GSMI_UNSUPPORTED2	0x03
+#define GSMI_LOG_FULL		0x0b
+#define GSMI_VAR_NOT_FOUND	0x0e
+#define GSMI_HANDSHAKE_SPIN	0x7d
+#define GSMI_HANDSHAKE_CF	0x7e
+#define GSMI_HANDSHAKE_NONE	0x7f
+#define GSMI_INVALID_PARAMETER	0x82
+#define GSMI_UNSUPPORTED	0x83
+#define GSMI_BUFFER_TOO_SMALL	0x85
+#define GSMI_NOT_READY		0x86
+#define GSMI_DEVICE_ERROR	0x87
+#define GSMI_NOT_FOUND		0x8e
+
+#define QUIRKY_BOARD_HASH 0x78a30a50
+
+/* Internally used commands passed to the firmware */
+#define GSMI_CMD_GET_NVRAM_VAR		0x01
+#define GSMI_CMD_GET_NEXT_VAR		0x02
+#define GSMI_CMD_SET_NVRAM_VAR		0x03
+#define GSMI_CMD_SET_EVENT_LOG		0x08
+#define GSMI_CMD_CLEAR_EVENT_LOG	0x09
+#define GSMI_CMD_CLEAR_CONFIG		0x20
+#define GSMI_CMD_HANDSHAKE_TYPE		0xC1
+
+/* Magic entry type for kernel events */
+#define GSMI_LOG_ENTRY_TYPE_KERNEL     0xDEAD
+
+/* SMI buffers must be in 32bit physical address space */
+struct gsmi_buf {
+	u8 *start;			/* start of buffer */
+	size_t length;			/* length of buffer */
+	dma_addr_t handle;		/* dma allocation handle */
+	u32 address;			/* physical address of buffer */
+};
+
+struct gsmi_device {
+	struct platform_device *pdev;	/* platform device */
+	struct gsmi_buf *name_buf;	/* variable name buffer */
+	struct gsmi_buf *data_buf;	/* generic data buffer */
+	struct gsmi_buf *param_buf;	/* parameter buffer */
+	spinlock_t lock;		/* serialize access to SMIs */
+	u16 smi_cmd;			/* SMI command port */
+	int handshake_type;		/* firmware handler interlock type */
+	struct dma_pool *dma_pool;	/* DMA buffer pool */
+} gsmi_dev;
+
+/* Packed structures for communicating with the firmware */
+struct gsmi_nvram_var_param {
+	efi_guid_t	guid;
+	u32		name_ptr;
+	u32		attributes;
+	u32		data_len;
+	u32		data_ptr;
+} __packed;
+
+struct gsmi_get_next_var_param {
+	u8	guid[GSMI_GUID_SIZE];
+	u32	name_ptr;
+	u32	name_len;
+} __packed;
+
+struct gsmi_set_eventlog_param {
+	u32	data_ptr;
+	u32	data_len;
+	u32	type;
+} __packed;
+
+/* Event log formats */
+struct gsmi_log_entry_type_1 {
+	u16	type;
+	u32	instance;
+} __packed;
+
+
+/*
+ * Some platforms don't have explicit SMI handshake
+ * and need to wait for SMI to complete.
+ */
+#define GSMI_DEFAULT_SPINCOUNT	0x10000
+static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT;
+module_param(spincount, uint, 0600);
+MODULE_PARM_DESC(spincount,
+	"The number of loop iterations to use when using the spin handshake.");
+
+static struct gsmi_buf *gsmi_buf_alloc(void)
+{
+	struct gsmi_buf *smibuf;
+
+	smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
+	if (!smibuf) {
+		printk(KERN_ERR "gsmi: out of memory\n");
+		return NULL;
+	}
+
+	/* allocate buffer in 32bit address space */
+	smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL,
+				       &smibuf->handle);
+	if (!smibuf->start) {
+		printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+		kfree(smibuf);
+		return NULL;
+	}
+
+	/* fill in the buffer handle */
+	smibuf->length = GSMI_BUF_SIZE;
+	smibuf->address = (u32)virt_to_phys(smibuf->start);
+
+	return smibuf;
+}
+
+static void gsmi_buf_free(struct gsmi_buf *smibuf)
+{
+	if (smibuf) {
+		if (smibuf->start)
+			dma_pool_free(gsmi_dev.dma_pool, smibuf->start,
+				      smibuf->handle);
+		kfree(smibuf);
+	}
+}
+
+/*
+ * Make a call to gsmi func(sub).  GSMI error codes are translated to
+ * in-kernel errnos (0 on success, -ERRNO on error).
+ */
+static int gsmi_exec(u8 func, u8 sub)
+{
+	u16 cmd = (sub << 8) | func;
+	u16 result = 0;
+	int rc = 0;
+
+	/*
+	 * AH  : Subfunction number
+	 * AL  : Function number
+	 * EBX : Parameter block address
+	 * DX  : SMI command port
+	 *
+	 * Three protocols here. See also the comment in gsmi_init().
+	 */
+	if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) {
+		/*
+		 * If handshake_type == HANDSHAKE_CF then set CF on the
+		 * way in and wait for the handler to clear it; this avoids
+		 * corrupting register state on those chipsets which have
+		 * a delay between writing the SMI trigger register and
+		 * entering SMM.
+		 */
+		asm volatile (
+			"stc\n"
+			"outb %%al, %%dx\n"
+		"1:      jc 1b\n"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address)
+			: "memory", "cc"
+		);
+	} else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) {
+		/*
+		 * If handshake_type == HANDSHAKE_SPIN we spin a
+		 * hundred-ish usecs to ensure the SMI has triggered.
+		 */
+		asm volatile (
+			"outb %%al, %%dx\n"
+		"1:      loop 1b\n"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address),
+			  "c" (spincount)
+			: "memory", "cc"
+		);
+	} else {
+		/*
+		 * If handshake_type == HANDSHAKE_NONE we do nothing;
+		 * either we don't need to or it's legacy firmware that
+		 * doesn't understand the CF protocol.
+		 */
+		asm volatile (
+			"outb %%al, %%dx\n\t"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address)
+			: "memory", "cc"
+		);
+	}
+
+	/* check return code from SMI handler */
+	switch (result) {
+	case GSMI_SUCCESS:
+		break;
+	case GSMI_VAR_NOT_FOUND:
+		/* not really an error, but let the caller know */
+		rc = 1;
+		break;
+	case GSMI_INVALID_PARAMETER:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
+		rc = -EINVAL;
+		break;
+	case GSMI_BUFFER_TOO_SMALL:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
+		rc = -ENOMEM;
+		break;
+	case GSMI_UNSUPPORTED:
+	case GSMI_UNSUPPORTED2:
+		if (sub != GSMI_CMD_HANDSHAKE_TYPE)
+			printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
+			       cmd);
+		rc = -ENOSYS;
+		break;
+	case GSMI_NOT_READY:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
+		rc = -EBUSY;
+		break;
+	case GSMI_DEVICE_ERROR:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
+		rc = -EFAULT;
+		break;
+	case GSMI_NOT_FOUND:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
+		rc = -ENOENT;
+		break;
+	case GSMI_LOG_FULL:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
+		rc = -ENOSPC;
+		break;
+	case GSMI_HANDSHAKE_CF:
+	case GSMI_HANDSHAKE_SPIN:
+	case GSMI_HANDSHAKE_NONE:
+		rc = result;
+		break;
+	default:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
+		       cmd, result);
+		rc = -ENXIO;
+	}
+
+	return rc;
+}
+
+/* Return the number of unicode characters in data */
+static size_t
+utf16_strlen(efi_char16_t *data, unsigned long maxlength)
+{
+	unsigned long length = 0;
+
+	while (*data++ != 0 && length < maxlength)
+		length++;
+	return length;
+}
+
+static efi_status_t gsmi_get_variable(efi_char16_t *name,
+				      efi_guid_t *vendor, u32 *attr,
+				      unsigned long *data_size,
+				      void *data)
+{
+	struct gsmi_nvram_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.data_ptr = gsmi_dev.data_buf->address,
+		.data_len = (u32)*data_size,
+	};
+	efi_status_t ret = EFI_SUCCESS;
+	unsigned long flags;
+	size_t name_len = utf16_strlen(name, GSMI_BUF_SIZE / 2);
+	int rc;
+
+	if (name_len >= GSMI_BUF_SIZE / 2)
+		return EFI_BAD_BUFFER_SIZE;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* Vendor guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+	memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Get Variable failed\n");
+		ret = EFI_LOAD_ERROR;
+	} else if (rc == 1) {
+		/* variable was not found */
+		ret = EFI_NOT_FOUND;
+	} else {
+		/* Get the arguments back */
+		memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
+
+		/* The size reported is the min of all of our buffers */
+		*data_size = min(*data_size, gsmi_dev.data_buf->length);
+		*data_size = min_t(unsigned long, *data_size, param.data_len);
+
+		/* Copy data back to return buffer. */
+		memcpy(data, gsmi_dev.data_buf->start, *data_size);
+
+		/* All variables are have the following attributes */
+		*attr = EFI_VARIABLE_NON_VOLATILE |
+			EFI_VARIABLE_BOOTSERVICE_ACCESS |
+			EFI_VARIABLE_RUNTIME_ACCESS;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static efi_status_t gsmi_get_next_variable(unsigned long *name_size,
+					   efi_char16_t *name,
+					   efi_guid_t *vendor)
+{
+	struct gsmi_get_next_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.name_len = gsmi_dev.name_buf->length,
+	};
+	efi_status_t ret = EFI_SUCCESS;
+	int rc;
+	unsigned long flags;
+
+	/* For the moment, only support buffers that exactly match in size */
+	if (*name_size != GSMI_BUF_SIZE)
+		return EFI_BAD_BUFFER_SIZE;
+
+	/* Let's make sure the thing is at least null-terminated */
+	if (utf16_strlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2)
+		return EFI_INVALID_PARAMETER;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memcpy(gsmi_dev.name_buf->start, name, *name_size);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
+		ret = EFI_LOAD_ERROR;
+	} else if (rc == 1) {
+		/* variable not found -- end of list */
+		ret = EFI_NOT_FOUND;
+	} else {
+		/* copy variable data back to return buffer */
+		memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
+
+		/* Copy the name back */
+		memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE);
+		*name_size = utf16_strlen(name, GSMI_BUF_SIZE / 2) * 2;
+
+		/* copy guid to return buffer */
+		memcpy(vendor, &param.guid, sizeof(param.guid));
+		ret = EFI_SUCCESS;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static efi_status_t gsmi_set_variable(efi_char16_t *name,
+				      efi_guid_t *vendor,
+				      unsigned long attr,
+				      unsigned long data_size,
+				      void *data)
+{
+	struct gsmi_nvram_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.data_ptr = gsmi_dev.data_buf->address,
+		.data_len = (u32)data_size,
+		.attributes = EFI_VARIABLE_NON_VOLATILE |
+			      EFI_VARIABLE_BOOTSERVICE_ACCESS |
+			      EFI_VARIABLE_RUNTIME_ACCESS,
+	};
+	size_t name_len = utf16_strlen(name, GSMI_BUF_SIZE / 2);
+	efi_status_t ret = EFI_SUCCESS;
+	int rc;
+	unsigned long flags;
+
+	if (name_len >= GSMI_BUF_SIZE / 2)
+		return EFI_BAD_BUFFER_SIZE;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+	memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, data, data_size);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Set Variable failed\n");
+		ret = EFI_INVALID_PARAMETER;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static const struct efivar_operations efivar_ops = {
+	.get_variable = gsmi_get_variable,
+	.set_variable = gsmi_set_variable,
+	.get_next_variable = gsmi_get_next_variable,
+};
+
+static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t pos, size_t count)
+{
+	struct gsmi_set_eventlog_param param = {
+		.data_ptr = gsmi_dev.data_buf->address,
+	};
+	int rc = 0;
+	unsigned long flags;
+
+	/* Pull the type out */
+	if (count < sizeof(u32))
+		return -EINVAL;
+	param.type = *(u32 *)buf;
+	count -= sizeof(u32);
+	buf += sizeof(u32);
+
+	/* The remaining buffer is the data payload */
+	if (count > gsmi_dev.data_buf->length)
+		return -EINVAL;
+	param.data_len = count - sizeof(u32);
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, buf, param.data_len);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+	if (rc < 0)
+		printk(KERN_ERR "gsmi: Set Event Log failed\n");
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return rc;
+
+}
+
+static struct bin_attribute eventlog_bin_attr = {
+	.attr = {.name = "append_to_eventlog", .mode = 0200},
+	.write = eventlog_write,
+};
+
+static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj,
+					 struct kobj_attribute *attr,
+					 const char *buf, size_t count)
+{
+	int rc;
+	unsigned long flags;
+	unsigned long val;
+	struct {
+		u32 percentage;
+		u32 data_type;
+	} param;
+
+	rc = strict_strtoul(buf, 0, &val);
+	if (rc)
+		return rc;
+
+	/*
+	 * Value entered is a percentage, 0 through 100, anything else
+	 * is invalid.
+	 */
+	if (val > 100)
+		return -EINVAL;
+
+	/* data_type here selects the smbios event log. */
+	param.percentage = val;
+	param.data_type = 0;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc)
+		return rc;
+	return count;
+}
+
+static struct kobj_attribute gsmi_clear_eventlog_attr = {
+	.attr = {.name = "clear_eventlog", .mode = 0200},
+	.store = gsmi_clear_eventlog_store,
+};
+
+static ssize_t gsmi_clear_config_store(struct kobject *kobj,
+				       struct kobj_attribute *attr,
+				       const char *buf, size_t count)
+{
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* clear parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc)
+		return rc;
+	return count;
+}
+
+static struct kobj_attribute gsmi_clear_config_attr = {
+	.attr = {.name = "clear_config", .mode = 0200},
+	.store = gsmi_clear_config_store,
+};
+
+static const struct attribute *gsmi_attrs[] = {
+	&gsmi_clear_config_attr.attr,
+	&gsmi_clear_eventlog_attr.attr,
+	NULL,
+};
+
+static int gsmi_shutdown_reason(int reason)
+{
+	struct gsmi_log_entry_type_1 entry = {
+		.type     = GSMI_LOG_ENTRY_TYPE_KERNEL,
+		.instance = reason,
+	};
+	struct gsmi_set_eventlog_param param = {
+		.data_len = sizeof(entry),
+		.type     = 1,
+	};
+	static int saved_reason;
+	int rc = 0;
+	unsigned long flags;
+
+	/* avoid duplicate entries in the log */
+	if (saved_reason & (1 << reason))
+		return 0;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	saved_reason |= (1 << reason);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry));
+
+	/* parameter buffer */
+	param.data_ptr = gsmi_dev.data_buf->address;
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc < 0)
+		printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
+	else
+		printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
+		       reason);
+
+	return rc;
+}
+
+static int gsmi_reboot_callback(struct notifier_block *nb,
+				unsigned long reason, void *arg)
+{
+	gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_reboot_notifier = {
+	.notifier_call = gsmi_reboot_callback
+};
+
+static int gsmi_die_callback(struct notifier_block *nb,
+			     unsigned long reason, void *arg)
+{
+	if (reason == DIE_OOPS)
+		gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_die_notifier = {
+	.notifier_call = gsmi_die_callback
+};
+
+static int gsmi_panic_callback(struct notifier_block *nb,
+			       unsigned long reason, void *arg)
+{
+	gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_panic_notifier = {
+	.notifier_call = gsmi_panic_callback,
+};
+
+/*
+ * This hash function was blatantly copied from include/linux/hash.h.
+ * It is used by this driver to obfuscate a board name that requires a
+ * quirk within this driver.
+ *
+ * Please do not remove this copy of the function as any changes to the
+ * global utility hash_64() function would break this driver's ability
+ * to identify a board and provide the appropriate quirk -- mikew@google.com
+ */
+static u64 __init local_hash_64(u64 val, unsigned bits)
+{
+	u64 hash = val;
+
+	/*  Sigh, gcc can't optimise this alone like it does for 32 bits. */
+	u64 n = hash;
+	n <<= 18;
+	hash -= n;
+	n <<= 33;
+	hash -= n;
+	n <<= 3;
+	hash += n;
+	n <<= 3;
+	hash -= n;
+	n <<= 4;
+	hash += n;
+	n <<= 2;
+	hash += n;
+
+	/* High bits are more random, so use them. */
+	return hash >> (64 - bits);
+}
+
+static u32 __init hash_oem_table_id(char s[8])
+{
+	u64 input;
+	memcpy(&input, s, 8);
+	return local_hash_64(input, 32);
+}
+
+static struct dmi_system_id gsmi_dmi_table[] __initdata = {
+	{
+		.ident = "Google Board",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table);
+
+static __init int gsmi_system_valid(void)
+{
+	u32 hash;
+
+	if (!dmi_check_system(gsmi_dmi_table))
+		return -ENODEV;
+
+	/*
+	 * Only newer firmware supports the gsmi interface.  All older
+	 * firmware that didn't support this interface used to plug the
+	 * table name in the first four bytes of the oem_table_id field.
+	 * Newer firmware doesn't do that though, so use that as the
+	 * discriminant factor.  We have to do this in order to
+	 * whitewash our board names out of the public driver.
+	 */
+	if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
+		printk(KERN_INFO "gsmi: Board is too old\n");
+		return -ENODEV;
+	}
+
+	/* Disable on board with 1.0 BIOS due to Google bug 2602657 */
+	hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id);
+	if (hash == QUIRKY_BOARD_HASH) {
+		const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
+		if (strncmp(bios_ver, "1.0", 3) == 0) {
+			pr_info("gsmi: disabled on this board's BIOS %s\n",
+				bios_ver);
+			return -ENODEV;
+		}
+	}
+
+	/* check for valid SMI command port in ACPI FADT */
+	if (acpi_gbl_FADT.smi_command == 0) {
+		pr_info("gsmi: missing smi_command\n");
+		return -ENODEV;
+	}
+
+	/* Found */
+	return 0;
+}
+
+static struct kobject *gsmi_kobj;
+static struct efivars efivars;
+
+static __init int gsmi_init(void)
+{
+	unsigned long flags;
+	int ret;
+
+	ret = gsmi_system_valid();
+	if (ret)
+		return ret;
+
+	gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
+
+	/* register device */
+	gsmi_dev.pdev = platform_device_register_simple("gsmi", -1, NULL, 0);
+	if (IS_ERR(gsmi_dev.pdev)) {
+		printk(KERN_ERR "gsmi: unable to register platform device\n");
+		return PTR_ERR(gsmi_dev.pdev);
+	}
+
+	/* SMI access needs to be serialized */
+	spin_lock_init(&gsmi_dev.lock);
+
+	/* SMI callbacks require 32bit addresses */
+	gsmi_dev.pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	gsmi_dev.pdev->dev.dma_mask =
+		&gsmi_dev.pdev->dev.coherent_dma_mask;
+	ret = -ENOMEM;
+	gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev,
+					     GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0);
+	if (!gsmi_dev.dma_pool)
+		goto out_err;
+
+	/*
+	 * pre-allocate buffers because sometimes we are called when
+	 * this is not feasible: oops, panic, die, mce, etc
+	 */
+	gsmi_dev.name_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.name_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+		goto out_err;
+	}
+
+	gsmi_dev.data_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.data_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
+		goto out_err;
+	}
+
+	gsmi_dev.param_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.param_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
+		goto out_err;
+	}
+
+	/*
+	 * Determine type of handshake used to serialize the SMI
+	 * entry. See also gsmi_exec().
+	 *
+	 * There's a "behavior" present on some chipsets where writing the
+	 * SMI trigger register in the southbridge doesn't result in an
+	 * immediate SMI. Rather, the processor can execute "a few" more
+	 * instructions before the SMI takes effect. To ensure synchronous
+	 * behavior, implement a handshake between the kernel driver and the
+	 * firmware handler to spin until released. This ioctl determines
+	 * the type of handshake.
+	 *
+	 * NONE: The firmware handler does not implement any
+	 * handshake. Either it doesn't need to, or it's legacy firmware
+	 * that doesn't know it needs to and never will.
+	 *
+	 * CF: The firmware handler will clear the CF in the saved
+	 * state before returning. The driver may set the CF and test for
+	 * it to clear before proceeding.
+	 *
+	 * SPIN: The firmware handler does not implement any handshake
+	 * but the driver should spin for a hundred or so microseconds
+	 * to ensure the SMI has triggered.
+	 *
+	 * Finally, the handler will return -ENOSYS if
+	 * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies
+	 * HANDSHAKE_NONE.
+	 */
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+	gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN;
+	gsmi_dev.handshake_type =
+	    gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE);
+	if (gsmi_dev.handshake_type == -ENOSYS)
+		gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE;
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	/* Remove and clean up gsmi if the handshake could not complete. */
+	if (gsmi_dev.handshake_type == -ENXIO) {
+		printk(KERN_INFO "gsmi version " DRIVER_VERSION
+		       " failed to load\n");
+		ret = -ENODEV;
+		goto out_err;
+	}
+
+	printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
+
+	/* Register in the firmware directory */
+	ret = -ENOMEM;
+	gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
+	if (!gsmi_kobj) {
+		printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
+		goto out_err;
+	}
+
+	/* Setup eventlog access */
+	ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to setup eventlog");
+		goto out_err;
+	}
+
+	/* Other attributes */
+	ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to add attrs");
+		goto out_err;
+	}
+
+	if (register_efivars(&efivars, &efivar_ops, gsmi_kobj)) {
+		printk(KERN_INFO "gsmi: Failed to register efivars\n");
+		goto out_err;
+	}
+
+	register_reboot_notifier(&gsmi_reboot_notifier);
+	register_die_notifier(&gsmi_die_notifier);
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &gsmi_panic_notifier);
+
+	return 0;
+
+ out_err:
+	kobject_put(gsmi_kobj);
+	gsmi_buf_free(gsmi_dev.param_buf);
+	gsmi_buf_free(gsmi_dev.data_buf);
+	gsmi_buf_free(gsmi_dev.name_buf);
+	if (gsmi_dev.dma_pool)
+		dma_pool_destroy(gsmi_dev.dma_pool);
+	platform_device_unregister(gsmi_dev.pdev);
+	pr_info("gsmi: failed to load: %d\n", ret);
+	return ret;
+}
+
+static void __exit gsmi_exit(void)
+{
+	unregister_reboot_notifier(&gsmi_reboot_notifier);
+	unregister_die_notifier(&gsmi_die_notifier);
+	atomic_notifier_chain_unregister(&panic_notifier_list,
+					 &gsmi_panic_notifier);
+	unregister_efivars(&efivars);
+
+	kobject_put(gsmi_kobj);
+	gsmi_buf_free(gsmi_dev.param_buf);
+	gsmi_buf_free(gsmi_dev.data_buf);
+	gsmi_buf_free(gsmi_dev.name_buf);
+	dma_pool_destroy(gsmi_dev.dma_pool);
+	platform_device_unregister(gsmi_dev.pdev);
+}
+
+module_init(gsmi_init);
+module_exit(gsmi_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/memconsole.c b/drivers/firmware/google/memconsole.c
new file mode 100644
index 00000000000..2a90ba61361
--- /dev/null
+++ b/drivers/firmware/google/memconsole.c
@@ -0,0 +1,166 @@
+/*
+ * memconsole.c
+ *
+ * Infrastructure for importing the BIOS memory based console
+ * into the kernel log ringbuffer.
+ *
+ * Copyright 2010 Google Inc. All rights reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <asm/bios_ebda.h>
+
+#define BIOS_MEMCONSOLE_V1_MAGIC	0xDEADBABE
+#define BIOS_MEMCONSOLE_V2_MAGIC	(('M')|('C'<<8)|('O'<<16)|('N'<<24))
+
+struct biosmemcon_ebda {
+	u32 signature;
+	union {
+		struct {
+			u8  enabled;
+			u32 buffer_addr;
+			u16 start;
+			u16 end;
+			u16 num_chars;
+			u8  wrapped;
+		} __packed v1;
+		struct {
+			u32 buffer_addr;
+			/* Misdocumented as number of pages! */
+			u16 num_bytes;
+			u16 start;
+			u16 end;
+		} __packed v2;
+	};
+} __packed;
+
+static char *memconsole_baseaddr;
+static size_t memconsole_length;
+
+static ssize_t memconsole_read(struct file *filp, struct kobject *kobp,
+			       struct bin_attribute *bin_attr, char *buf,
+			       loff_t pos, size_t count)
+{
+	return memory_read_from_buffer(buf, count, &pos, memconsole_baseaddr,
+				       memconsole_length);
+}
+
+static struct bin_attribute memconsole_bin_attr = {
+	.attr = {.name = "log", .mode = 0444},
+	.read = memconsole_read,
+};
+
+
+static void found_v1_header(struct biosmemcon_ebda *hdr)
+{
+	printk(KERN_INFO "BIOS console v1 EBDA structure found at %p\n", hdr);
+	printk(KERN_INFO "BIOS console buffer at 0x%.8x, "
+	       "start = %d, end = %d, num = %d\n",
+	       hdr->v1.buffer_addr, hdr->v1.start,
+	       hdr->v1.end, hdr->v1.num_chars);
+
+	memconsole_length = hdr->v1.num_chars;
+	memconsole_baseaddr = phys_to_virt(hdr->v1.buffer_addr);
+}
+
+static void found_v2_header(struct biosmemcon_ebda *hdr)
+{
+	printk(KERN_INFO "BIOS console v2 EBDA structure found at %p\n", hdr);
+	printk(KERN_INFO "BIOS console buffer at 0x%.8x, "
+	       "start = %d, end = %d, num_bytes = %d\n",
+	       hdr->v2.buffer_addr, hdr->v2.start,
+	       hdr->v2.end, hdr->v2.num_bytes);
+
+	memconsole_length = hdr->v2.end - hdr->v2.start;
+	memconsole_baseaddr = phys_to_virt(hdr->v2.buffer_addr
+					   + hdr->v2.start);
+}
+
+/*
+ * Search through the EBDA for the BIOS Memory Console, and
+ * set the global variables to point to it.  Return true if found.
+ */
+static bool found_memconsole(void)
+{
+	unsigned int address;
+	size_t length, cur;
+
+	address = get_bios_ebda();
+	if (!address) {
+		printk(KERN_INFO "BIOS EBDA non-existent.\n");
+		return false;
+	}
+
+	/* EBDA length is byte 0 of EBDA (in KB) */
+	length = *(u8 *)phys_to_virt(address);
+	length <<= 10; /* convert to bytes */
+
+	/*
+	 * Search through EBDA for BIOS memory console structure
+	 * note: signature is not necessarily dword-aligned
+	 */
+	for (cur = 0; cur < length; cur++) {
+		struct biosmemcon_ebda *hdr = phys_to_virt(address + cur);
+
+		/* memconsole v1 */
+		if (hdr->signature == BIOS_MEMCONSOLE_V1_MAGIC) {
+			found_v1_header(hdr);
+			return true;
+		}
+
+		/* memconsole v2 */
+		if (hdr->signature == BIOS_MEMCONSOLE_V2_MAGIC) {
+			found_v2_header(hdr);
+			return true;
+		}
+	}
+
+	printk(KERN_INFO "BIOS console EBDA structure not found!\n");
+	return false;
+}
+
+static struct dmi_system_id memconsole_dmi_table[] __initdata = {
+	{
+		.ident = "Google Board",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, memconsole_dmi_table);
+
+static int __init memconsole_init(void)
+{
+	int ret;
+
+	if (!dmi_check_system(memconsole_dmi_table))
+		return -ENODEV;
+
+	if (!found_memconsole())
+		return -ENODEV;
+
+	memconsole_bin_attr.size = memconsole_length;
+
+	ret = sysfs_create_bin_file(firmware_kobj, &memconsole_bin_attr);
+
+	return ret;
+}
+
+static void __exit memconsole_exit(void)
+{
+	sysfs_remove_bin_file(firmware_kobj, &memconsole_bin_attr);
+}
+
+module_init(memconsole_init);
+module_exit(memconsole_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 2192456dfd6..f032e446fc1 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -42,7 +42,20 @@
 struct acpi_table_ibft *ibft_addr;
 EXPORT_SYMBOL_GPL(ibft_addr);
 
-#define IBFT_SIGN "iBFT"
+static const struct {
+	char *sign;
+} ibft_signs[] = {
+#ifdef CONFIG_ACPI
+	/*
+	 * One spec says "IBFT", the other says "iBFT". We have to check
+	 * for both.
+	 */
+	{ ACPI_SIG_IBFT },
+#endif
+	{ "iBFT" },
+	{ "BIFT" },	/* Broadcom iSCSI Offload */
+};
+
 #define IBFT_SIGN_LEN 4
 #define IBFT_START 0x80000 /* 512kB */
 #define IBFT_END 0x100000 /* 1MB */
@@ -62,6 +75,7 @@ static int __init find_ibft_in_mem(void)
 	unsigned long pos;
 	unsigned int len = 0;
 	void *virt;
+	int i;
 
 	for (pos = IBFT_START; pos < IBFT_END; pos += 16) {
 		/* The table can't be inside the VGA BIOS reserved space,
@@ -69,18 +83,23 @@ static int __init find_ibft_in_mem(void)
 		if (pos == VGA_MEM)
 			pos += VGA_SIZE;
 		virt = isa_bus_to_virt(pos);
-		if (memcmp(virt, IBFT_SIGN, IBFT_SIGN_LEN) == 0) {
-			unsigned long *addr =
-			    (unsigned long *)isa_bus_to_virt(pos + 4);
-			len = *addr;
-			/* if the length of the table extends past 1M,
-			 * the table cannot be valid. */
-			if (pos + len <= (IBFT_END-1)) {
-				ibft_addr = (struct acpi_table_ibft *)virt;
-				break;
+
+		for (i = 0; i < ARRAY_SIZE(ibft_signs); i++) {
+			if (memcmp(virt, ibft_signs[i].sign, IBFT_SIGN_LEN) ==
+			    0) {
+				unsigned long *addr =
+				    (unsigned long *)isa_bus_to_virt(pos + 4);
+				len = *addr;
+				/* if the length of the table extends past 1M,
+				 * the table cannot be valid. */
+				if (pos + len <= (IBFT_END-1)) {
+					ibft_addr = (struct acpi_table_ibft *)virt;
+					goto done;
+				}
 			}
 		}
 	}
+done:
 	return len;
 }
 /*
@@ -89,18 +108,12 @@ static int __init find_ibft_in_mem(void)
  */
 unsigned long __init find_ibft_region(unsigned long *sizep)
 {
-
+	int i;
 	ibft_addr = NULL;
 
 #ifdef CONFIG_ACPI
-	/*
-	 * One spec says "IBFT", the other says "iBFT". We have to check
-	 * for both.
-	 */
-	if (!ibft_addr)
-		acpi_table_parse(ACPI_SIG_IBFT, acpi_find_ibft);
-	if (!ibft_addr)
-		acpi_table_parse(IBFT_SIGN, acpi_find_ibft);
+	for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++)
+		acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft);
 #endif /* CONFIG_ACPI */
 
 	/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
diff --git a/drivers/gpio/mc33880.c b/drivers/gpio/mc33880.c
index 00f6d24c669..4ec797593bd 100644
--- a/drivers/gpio/mc33880.c
+++ b/drivers/gpio/mc33880.c
@@ -45,7 +45,7 @@
  * To save time we cache them here in memory
  */
 struct mc33880 {
-	struct mutex	lock;	/* protect from simultanous accesses */
+	struct mutex	lock;	/* protect from simultaneous accesses */
 	u8		port_config;
 	struct gpio_chip chip;
 	struct spi_device *spi;
diff --git a/drivers/gpio/ml_ioh_gpio.c b/drivers/gpio/ml_ioh_gpio.c
index 7f6f01a4b14..0a775f7987c 100644
--- a/drivers/gpio/ml_ioh_gpio.c
+++ b/drivers/gpio/ml_ioh_gpio.c
@@ -116,6 +116,7 @@ static int ioh_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 		reg_val |= (1 << nr);
 	else
 		reg_val &= ~(1 << nr);
+	iowrite32(reg_val, &chip->reg->regs[chip->ch].po);
 
 	mutex_unlock(&chip->lock);
 
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 583e9259207..7630ab7b9be 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -558,7 +558,7 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 
 	ret = gpiochip_add(&chip->gpio_chip);
 	if (ret)
-		goto out_failed;
+		goto out_failed_irq;
 
 	if (pdata->setup) {
 		ret = pdata->setup(client, chip->gpio_chip.base,
@@ -570,8 +570,9 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, chip);
 	return 0;
 
-out_failed:
+out_failed_irq:
 	pca953x_irq_teardown(chip);
+out_failed:
 	kfree(chip->dyn_pdata);
 	kfree(chip);
 	return ret;
diff --git a/drivers/gpio/pch_gpio.c b/drivers/gpio/pch_gpio.c
index 2c6af870510..f970a5f3585 100644
--- a/drivers/gpio/pch_gpio.c
+++ b/drivers/gpio/pch_gpio.c
@@ -105,6 +105,7 @@ static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 		reg_val |= (1 << nr);
 	else
 		reg_val &= ~(1 << nr);
+	iowrite32(reg_val, &chip->reg->po);
 
 	mutex_unlock(&chip->lock);
 
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index a6feb78c404..b493663c7ba 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -24,6 +24,7 @@ config DRM_KMS_HELPER
 	depends on DRM
 	select FB
 	select FRAMEBUFFER_CONSOLE if !EXPERT
+	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
 	help
 	  FB and CRTC helpers for KMS drivers.
 
@@ -96,6 +97,7 @@ config DRM_I915
 	# i915 depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
 	select BACKLIGHT_CLASS_DEVICE if ACPI
+	select VIDEO_OUTPUT_CONTROL if ACPI
 	select INPUT if ACPI
 	select ACPI_VIDEO if ACPI
 	select ACPI_BUTTON if ACPI
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 799e1490cf2..872747c5a54 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1699,7 +1699,7 @@ int drm_mode_addfb(struct drm_device *dev,
 
 	mutex_lock(&dev->mode_config.mutex);
 
-	/* TODO check buffer is sufficently large */
+	/* TODO check buffer is sufficiently large */
 	/* TODO setup destructor callback */
 
 	fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
@@ -1750,7 +1750,7 @@ int drm_mode_rmfb(struct drm_device *dev,
 
 	mutex_lock(&dev->mode_config.mutex);
 	obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB);
-	/* TODO check that we realy get a framebuffer back. */
+	/* TODO check that we really get a framebuffer back. */
 	if (!obj) {
 		DRM_ERROR("mode invalid framebuffer id\n");
 		ret = -EINVAL;
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 9c595e3b9c2..adc9358c9be 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1297,7 +1297,7 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
 /**
  * Search EDID for CEA extension block.
  */
-static u8 *drm_find_cea_extension(struct edid *edid)
+u8 *drm_find_cea_extension(struct edid *edid)
 {
 	u8 *edid_ext = NULL;
 	int i;
@@ -1318,6 +1318,7 @@ static u8 *drm_find_cea_extension(struct edid *edid)
 
 	return edid_ext;
 }
+EXPORT_SYMBOL(drm_find_cea_extension);
 
 /**
  * drm_detect_hdmi_monitor - detect whether monitor is hdmi.
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 95072047396..140b9525b48 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -342,9 +342,22 @@ int drm_fb_helper_debug_leave(struct fb_info *info)
 }
 EXPORT_SYMBOL(drm_fb_helper_debug_leave);
 
+bool drm_fb_helper_restore_fbdev_mode(struct drm_fb_helper *fb_helper)
+{
+	bool error = false;
+	int i, ret;
+	for (i = 0; i < fb_helper->crtc_count; i++) {
+		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
+		ret = drm_crtc_helper_set_config(mode_set);
+		if (ret)
+			error = true;
+	}
+	return error;
+}
+EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode);
+
 bool drm_fb_helper_force_kernel_mode(void)
 {
-	int i = 0;
 	bool ret, error = false;
 	struct drm_fb_helper *helper;
 
@@ -352,12 +365,12 @@ bool drm_fb_helper_force_kernel_mode(void)
 		return false;
 
 	list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
-		for (i = 0; i < helper->crtc_count; i++) {
-			struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set;
-			ret = drm_crtc_helper_set_config(mode_set);
-			if (ret)
-				error = true;
-		}
+		if (helper->dev->switch_power_state == DRM_SWITCH_POWER_OFF)
+			continue;
+
+		ret = drm_fb_helper_restore_fbdev_mode(helper);
+		if (ret)
+			error = true;
 	}
 	return error;
 }
@@ -1503,17 +1516,33 @@ bool drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
 }
 EXPORT_SYMBOL(drm_fb_helper_initial_config);
 
-bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
+/**
+ * drm_fb_helper_hotplug_event - respond to a hotplug notification by
+ *                               probing all the outputs attached to the fb.
+ * @fb_helper: the drm_fb_helper
+ *
+ * LOCKING:
+ * Called at runtime, must take mode config lock.
+ *
+ * Scan the connectors attached to the fb_helper and try to put together a
+ * setup after *notification of a change in output configuration.
+ *
+ * RETURNS:
+ * 0 on success and a non-zero error code otherwise.
+ */
+int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
 {
+	struct drm_device *dev = fb_helper->dev;
 	int count = 0;
 	u32 max_width, max_height, bpp_sel;
 	bool bound = false, crtcs_bound = false;
 	struct drm_crtc *crtc;
 
 	if (!fb_helper->fb)
-		return false;
+		return 0;
 
-	list_for_each_entry(crtc, &fb_helper->dev->mode_config.crtc_list, head) {
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		if (crtc->fb)
 			crtcs_bound = true;
 		if (crtc->fb == fb_helper->fb)
@@ -1522,7 +1551,8 @@ bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
 
 	if (!bound && crtcs_bound) {
 		fb_helper->delayed_hotplug = true;
-		return false;
+		mutex_unlock(&dev->mode_config.mutex);
+		return 0;
 	}
 	DRM_DEBUG_KMS("\n");
 
@@ -1533,6 +1563,7 @@ bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
 	count = drm_fb_helper_probe_connector_modes(fb_helper, max_width,
 						    max_height);
 	drm_setup_crtcs(fb_helper);
+	mutex_unlock(&dev->mode_config.mutex);
 
 	return drm_fb_helper_single_fb_probe(fb_helper, bpp_sel);
 }
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 741457bd1c4..a1f12cb043d 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -932,11 +932,34 @@ EXPORT_SYMBOL(drm_vblank_put);
 
 void drm_vblank_off(struct drm_device *dev, int crtc)
 {
+	struct drm_pending_vblank_event *e, *t;
+	struct timeval now;
 	unsigned long irqflags;
+	unsigned int seq;
 
 	spin_lock_irqsave(&dev->vbl_lock, irqflags);
 	vblank_disable_and_save(dev, crtc);
 	DRM_WAKEUP(&dev->vbl_queue[crtc]);
+
+	/* Send any queued vblank events, lest the natives grow disquiet */
+	seq = drm_vblank_count_and_time(dev, crtc, &now);
+	list_for_each_entry_safe(e, t, &dev->vblank_event_list, base.link) {
+		if (e->pipe != crtc)
+			continue;
+		DRM_DEBUG("Sending premature vblank event on disable: \
+			  wanted %d, current %d\n",
+			  e->event.sequence, seq);
+
+		e->event.sequence = seq;
+		e->event.tv_sec = now.tv_sec;
+		e->event.tv_usec = now.tv_usec;
+		drm_vblank_put(dev, e->pipe);
+		list_move_tail(&e->base.link, &e->base.file_priv->event_list);
+		wake_up_interruptible(&e->base.file_priv->event_wait);
+		trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
+						 e->event.sequence);
+	}
+
 	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 }
 EXPORT_SYMBOL(drm_vblank_off);
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index add1737dae0..959186cbf32 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -431,7 +431,7 @@ EXPORT_SYMBOL(drm_mm_search_free_in_range);
 void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new)
 {
 	list_replace(&old->node_list, &new->node_list);
-	list_replace(&old->node_list, &new->hole_stack);
+	list_replace(&old->hole_stack, &new->hole_stack);
 	new->hole_follows = old->hole_follows;
 	new->mm = old->mm;
 	new->start = old->start;
@@ -551,7 +551,7 @@ EXPORT_SYMBOL(drm_mm_scan_add_block);
  * corrupted.
  *
  * When the scan list is empty, the selected memory nodes can be freed. An
- * immediatly following drm_mm_search_free with best_match = 0 will then return
+ * immediately following drm_mm_search_free with best_match = 0 will then return
  * the just freed block (because its at the top of the free_stack list).
  *
  * Returns one if this block should be evicted, zero otherwise. Will always
@@ -699,8 +699,8 @@ int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm)
 				entry->size);
 		total_used += entry->size;
 		if (entry->hole_follows) {
-			hole_start = drm_mm_hole_node_start(&mm->head_node);
-			hole_end = drm_mm_hole_node_end(&mm->head_node);
+			hole_start = drm_mm_hole_node_start(entry);
+			hole_end = drm_mm_hole_node_end(entry);
 			hole_size = hole_end - hole_start;
 			seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n",
 					hole_start, hole_end, hole_size);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 72730377a01..12876f2795d 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -2207,7 +2207,7 @@ void i915_driver_lastclose(struct drm_device * dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) {
-		drm_fb_helper_restore();
+		intel_fb_restore_mode(dev);
 		vga_switcheroo_process_delayed_switch();
 		return;
 	}
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index c34a8dd31d0..32d1b3e829c 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -49,7 +49,7 @@ module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
 unsigned int i915_powersave = 1;
 module_param_named(powersave, i915_powersave, int, 0600);
 
-unsigned int i915_semaphores = 1;
+unsigned int i915_semaphores = 0;
 module_param_named(semaphores, i915_semaphores, int, 0600);
 
 unsigned int i915_enable_rc6 = 0;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 5004724ea57..1c1b27c97e5 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -630,7 +630,7 @@ typedef struct drm_i915_private {
 		 * Flag if the hardware appears to be wedged.
 		 *
 		 * This is set when attempts to idle the device timeout.
-		 * It prevents command submission from occuring and makes
+		 * It prevents command submission from occurring and makes
 		 * every pending request fail
 		 */
 		atomic_t wedged;
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 8342259f316..d03fc05b39c 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -269,21 +269,6 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	return ret;
 }
 
-static bool intel_crt_ddc_probe(struct drm_i915_private *dev_priv, int ddc_bus)
-{
-	u8 buf;
-	struct i2c_msg msgs[] = {
-		{
-			.addr = 0xA0,
-			.flags = 0,
-			.len = 1,
-			.buf = &buf,
-		},
-	};
-	/* DDC monitor detect: Does it ACK a write to 0xA0? */
-	return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
-}
-
 static bool intel_crt_detect_ddc(struct drm_connector *connector)
 {
 	struct intel_crt *crt = intel_attached_crt(connector);
@@ -293,11 +278,6 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
 	if (crt->base.type != INTEL_OUTPUT_ANALOG)
 		return false;
 
-	if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
-		DRM_DEBUG_KMS("CRT detected via DDC:0xa0\n");
-		return true;
-	}
-
 	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
 		struct edid *edid;
 		bool is_digital = false;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 432fc04c6bf..2166ee071dd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3771,8 +3771,11 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 	int entries, tlb_miss;
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	if (crtc->fb == NULL || !crtc->enabled)
+	if (crtc->fb == NULL || !crtc->enabled) {
+		*cursor_wm = cursor->guard_size;
+		*plane_wm = display->guard_size;
 		return false;
+	}
 
 	htotal = crtc->mode.htotal;
 	hdisplay = crtc->mode.hdisplay;
@@ -5602,9 +5605,9 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
 	intel_clock_t clock;
 
 	if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
-		fp = FP0(pipe);
+		fp = I915_READ(FP0(pipe));
 	else
-		fp = FP1(pipe);
+		fp = I915_READ(FP1(pipe));
 
 	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
 	if (IS_PINEVIEW(dev)) {
@@ -6215,36 +6218,6 @@ cleanup_work:
 	return ret;
 }
 
-static void intel_crtc_reset(struct drm_crtc *crtc)
-{
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
-	/* Reset flags back to the 'unknown' status so that they
-	 * will be correctly set on the initial modeset.
-	 */
-	intel_crtc->dpms_mode = -1;
-}
-
-static struct drm_crtc_helper_funcs intel_helper_funcs = {
-	.dpms = intel_crtc_dpms,
-	.mode_fixup = intel_crtc_mode_fixup,
-	.mode_set = intel_crtc_mode_set,
-	.mode_set_base = intel_pipe_set_base,
-	.mode_set_base_atomic = intel_pipe_set_base_atomic,
-	.load_lut = intel_crtc_load_lut,
-	.disable = intel_crtc_disable,
-};
-
-static const struct drm_crtc_funcs intel_crtc_funcs = {
-	.reset = intel_crtc_reset,
-	.cursor_set = intel_crtc_cursor_set,
-	.cursor_move = intel_crtc_cursor_move,
-	.gamma_set = intel_crtc_gamma_set,
-	.set_config = drm_crtc_helper_set_config,
-	.destroy = intel_crtc_destroy,
-	.page_flip = intel_crtc_page_flip,
-};
-
 static void intel_sanitize_modesetting(struct drm_device *dev,
 				       int pipe, int plane)
 {
@@ -6281,6 +6254,42 @@ static void intel_sanitize_modesetting(struct drm_device *dev,
 	intel_disable_pipe(dev_priv, pipe);
 }
 
+static void intel_crtc_reset(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	/* Reset flags back to the 'unknown' status so that they
+	 * will be correctly set on the initial modeset.
+	 */
+	intel_crtc->dpms_mode = -1;
+
+	/* We need to fix up any BIOS configuration that conflicts with
+	 * our expectations.
+	 */
+	intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
+}
+
+static struct drm_crtc_helper_funcs intel_helper_funcs = {
+	.dpms = intel_crtc_dpms,
+	.mode_fixup = intel_crtc_mode_fixup,
+	.mode_set = intel_crtc_mode_set,
+	.mode_set_base = intel_pipe_set_base,
+	.mode_set_base_atomic = intel_pipe_set_base_atomic,
+	.load_lut = intel_crtc_load_lut,
+	.disable = intel_crtc_disable,
+};
+
+static const struct drm_crtc_funcs intel_crtc_funcs = {
+	.reset = intel_crtc_reset,
+	.cursor_set = intel_crtc_cursor_set,
+	.cursor_move = intel_crtc_cursor_move,
+	.gamma_set = intel_crtc_gamma_set,
+	.set_config = drm_crtc_helper_set_config,
+	.destroy = intel_crtc_destroy,
+	.page_flip = intel_crtc_page_flip,
+};
+
 static void intel_crtc_init(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -6330,8 +6339,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 
 	setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
 		    (unsigned long)intel_crtc);
-
-	intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
 }
 
 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
@@ -6572,8 +6579,10 @@ intel_user_framebuffer_create(struct drm_device *dev,
 		return ERR_PTR(-ENOENT);
 
 	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
-	if (!intel_fb)
+	if (!intel_fb) {
+		drm_gem_object_unreference_unlocked(&obj->base);
 		return ERR_PTR(-ENOMEM);
+	}
 
 	ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
 	if (ret) {
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 0daefca5cbb..a4d80314e7f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -213,7 +213,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
 			return MODE_PANEL;
 	}
 
-	/* only refuse the mode on non eDP since we have seen some wierd eDP panels
+	/* only refuse the mode on non eDP since we have seen some weird eDP panels
 	   which are outside spec tolerances but somehow work by magic */
 	if (!is_edp(intel_dp) &&
 	    (intel_dp_link_required(connector->dev, intel_dp, mode->clock)
@@ -1470,7 +1470,8 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 
 	if (!HAS_PCH_CPT(dev) &&
 	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
-		struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+		struct drm_crtc *crtc = intel_dp->base.base.crtc;
+
 		/* Hardware workaround: leaving our transcoder select
 		 * set to transcoder B while it's off will prevent the
 		 * corresponding HDMI output on transcoder A.
@@ -1485,7 +1486,19 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 		/* Changes to enable or select take place the vblank
 		 * after being written.
 		 */
-		intel_wait_for_vblank(dev, intel_crtc->pipe);
+		if (crtc == NULL) {
+			/* We can arrive here never having been attached
+			 * to a CRTC, for instance, due to inheriting
+			 * random state from the BIOS.
+			 *
+			 * If the pipe is not running, play safe and
+			 * wait for the clocks to stabilise before
+			 * continuing.
+			 */
+			POSTING_READ(intel_dp->output_reg);
+			msleep(50);
+		} else
+			intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
 	}
 
 	I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 5daa991cb28..1d20712d527 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -39,7 +39,7 @@
 			ret__ = -ETIMEDOUT;				\
 			break;						\
 		}							\
-		if (W && !in_dbg_master()) msleep(W);			\
+		if (W && !(in_atomic() || in_dbg_master())) msleep(W);	\
 	}								\
 	ret__;								\
 })
@@ -338,4 +338,5 @@ extern int intel_overlay_attrs(struct drm_device *dev, void *data,
 			       struct drm_file *file_priv);
 
 extern void intel_fb_output_poll_changed(struct drm_device *dev);
+extern void intel_fb_restore_mode(struct drm_device *dev);
 #endif /* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 512782728e5..ec49bae7338 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -264,3 +264,13 @@ void intel_fb_output_poll_changed(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	drm_fb_helper_hotplug_event(&dev_priv->fbdev->helper);
 }
+
+void intel_fb_restore_mode(struct drm_device *dev)
+{
+	int ret;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	ret = drm_fb_helper_restore_fbdev_mode(&dev_priv->fbdev->helper);
+	if (ret)
+		DRM_DEBUG("failed to restore crtc mode\n");
+}
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 82d04c5899d..d3b903bce7c 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -259,7 +259,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
 				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
 					goto timeout;
 				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
-					return 0;
+					goto clear_err;
 
 				val = I915_READ(GMBUS3 + reg_offset);
 				do {
@@ -287,7 +287,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
 				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
 					goto timeout;
 				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
-					return 0;
+					goto clear_err;
 
 				val = loop = 0;
 				do {
@@ -302,14 +302,31 @@ gmbus_xfer(struct i2c_adapter *adapter,
 		if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
 			goto timeout;
 		if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
-			return 0;
+			goto clear_err;
 	}
 
-	return num;
+	goto done;
+
+clear_err:
+	/* Toggle the Software Clear Interrupt bit. This has the effect
+	 * of resetting the GMBUS controller and so clearing the
+	 * BUS_ERROR raised by the slave's NAK.
+	 */
+	I915_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT);
+	I915_WRITE(GMBUS1 + reg_offset, 0);
+
+done:
+	/* Mark the GMBUS interface as disabled. We will re-enable it at the
+	 * start of the next xfer, till then let it sleep.
+	 */
+	I915_WRITE(GMBUS0 + reg_offset, 0);
+	return i;
 
 timeout:
 	DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
 		 bus->reg0 & 0xff, bus->adapter.name);
+	I915_WRITE(GMBUS0 + reg_offset, 0);
+
 	/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
 	bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff);
 	if (!bus->force_bit)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 1a311ad0111..67cb076d271 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -473,19 +473,13 @@ static enum drm_connector_status
 intel_lvds_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
-	enum drm_connector_status status = connector_status_connected;
+	enum drm_connector_status status;
 
 	status = intel_panel_detect(dev);
 	if (status != connector_status_unknown)
 		return status;
 
-	/* ACPI lid methods were generally unreliable in this generation, so
-	 * don't even bother.
-	 */
-	if (IS_GEN2(dev) || IS_GEN3(dev))
-		return connector_status_connected;
-
-	return status;
+	return connector_status_connected;
 }
 
 /**
@@ -545,6 +539,9 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	struct drm_device *dev = dev_priv->dev;
 	struct drm_connector *connector = dev_priv->int_lvds_connector;
 
+	if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
+		return NOTIFY_OK;
+
 	/*
 	 * check and update the status of LVDS connector after receiving
 	 * the LID nofication event.
@@ -835,25 +832,6 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev,
 	return false;
 }
 
-static bool intel_lvds_ddc_probe(struct drm_device *dev, u8 pin)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u8 buf = 0;
-	struct i2c_msg msgs[] = {
-		{
-			.addr = 0xA0,
-			.flags = 0,
-			.len = 1,
-			.buf = &buf,
-		},
-	};
-	struct i2c_adapter *i2c = &dev_priv->gmbus[pin].adapter;
-	/* XXX this only appears to work when using GMBUS */
-	if (intel_gmbus_is_forced_bit(i2c))
-		return true;
-	return i2c_transfer(i2c, msgs, 1) == 1;
-}
-
 /**
  * intel_lvds_init - setup LVDS connectors on this device
  * @dev: drm device
@@ -894,11 +872,6 @@ bool intel_lvds_init(struct drm_device *dev)
 		}
 	}
 
-	if (!intel_lvds_ddc_probe(dev, pin)) {
-		DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n");
-		return false;
-	}
-
 	intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
 	if (!intel_lvds) {
 		return false;
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
index a386b022e53..4f4e23bc2d1 100644
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -230,7 +230,7 @@ struct intel_sdvo_set_target_input_args {
 } __attribute__((packed));
 
 /**
- * Takes a struct intel_sdvo_output_flags of which outputs are targetted by
+ * Takes a struct intel_sdvo_output_flags of which outputs are targeted by
  * future output commands.
  *
  * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 4256b8ef394..6b22c1dcc01 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1151,10 +1151,10 @@ intel_tv_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 			    (video_levels->blank << TV_BLANK_LEVEL_SHIFT)));
 	{
 		int pipeconf_reg = PIPECONF(pipe);
-		int dspcntr_reg = DSPCNTR(pipe);
+		int dspcntr_reg = DSPCNTR(intel_crtc->plane);
 		int pipeconf = I915_READ(pipeconf_reg);
 		int dspcntr = I915_READ(dspcntr_reg);
-		int dspbase_reg = DSPADDR(pipe);
+		int dspbase_reg = DSPADDR(intel_crtc->plane);
 		int xpos = 0x0, ypos = 0x0;
 		unsigned int xsize, ysize;
 		/* Pipe must be off here */
@@ -1378,7 +1378,9 @@ intel_tv_detect(struct drm_connector *connector, bool force)
 	if (type < 0)
 		return connector_status_disconnected;
 
+	intel_tv->type = type;
 	intel_tv_find_better_format(connector);
+
 	return connector_status_connected;
 }
 
@@ -1670,8 +1672,7 @@ intel_tv_init(struct drm_device *dev)
 	 *
 	 * More recent chipsets favour HDMI rather than integrated S-Video.
 	 */
-	connector->polled =
-		DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+	connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
 	drm_connector_init(dev, connector, &intel_tv_connector_funcs,
 			   DRM_MODE_CONNECTOR_SVIDEO);
diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c
index 1e1eb1d7e97..5ccb65deb83 100644
--- a/drivers/gpu/drm/mga/mga_dma.c
+++ b/drivers/gpu/drm/mga/mga_dma.c
@@ -426,7 +426,7 @@ int mga_driver_load(struct drm_device *dev, unsigned long flags)
  * Bootstrap the driver for AGP DMA.
  *
  * \todo
- * Investigate whether there is any benifit to storing the WARP microcode in
+ * Investigate whether there is any benefit to storing the WARP microcode in
  * AGP memory.  If not, the microcode may as well always be put in PCI
  * memory.
  *
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 8314a49b6b9..90aef64b76f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -269,7 +269,7 @@ struct init_tbl_entry {
 	int (*handler)(struct nvbios *, uint16_t, struct init_exec *);
 };
 
-static int parse_init_table(struct nvbios *, unsigned int, struct init_exec *);
+static int parse_init_table(struct nvbios *, uint16_t, struct init_exec *);
 
 #define MACRO_INDEX_SIZE	2
 #define MACRO_SIZE		8
@@ -2011,6 +2011,27 @@ init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 }
 
 static int
+init_jump(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
+{
+	/*
+	 * INIT_JUMP   opcode: 0x5C ('\')
+	 *
+	 * offset      (8  bit): opcode
+	 * offset + 1  (16 bit): offset (in bios)
+	 *
+	 * Continue execution of init table from 'offset'
+	 */
+
+	uint16_t jmp_offset = ROM16(bios->data[offset + 1]);
+
+	if (!iexec->execute)
+		return 3;
+
+	BIOSLOG(bios, "0x%04X: Jump to 0x%04X\n", offset, jmp_offset);
+	return jmp_offset - offset;
+}
+
+static int
 init_i2c_if(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 {
 	/*
@@ -3659,6 +3680,7 @@ static struct init_tbl_entry itbl_entry[] = {
 	{ "INIT_ZM_REG_SEQUENCE"              , 0x58, init_zm_reg_sequence            },
 	/* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */
 	{ "INIT_SUB_DIRECT"                   , 0x5B, init_sub_direct                 },
+	{ "INIT_JUMP"                         , 0x5C, init_jump                       },
 	{ "INIT_I2C_IF"                       , 0x5E, init_i2c_if                     },
 	{ "INIT_COPY_NV_REG"                  , 0x5F, init_copy_nv_reg                },
 	{ "INIT_ZM_INDEX_IO"                  , 0x62, init_zm_index_io                },
@@ -3700,8 +3722,7 @@ static struct init_tbl_entry itbl_entry[] = {
 #define MAX_TABLE_OPS 1000
 
 static int
-parse_init_table(struct nvbios *bios, unsigned int offset,
-		 struct init_exec *iexec)
+parse_init_table(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 {
 	/*
 	 * Parses all commands in an init table.
@@ -6333,6 +6354,32 @@ apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf)
 		}
 	}
 
+	/* XFX GT-240X-YA
+	 *
+	 * So many things wrong here, replace the entire encoder table..
+	 */
+	if (nv_match_device(dev, 0x0ca3, 0x1682, 0x3003)) {
+		if (idx == 0) {
+			*conn = 0x02001300; /* VGA, connector 1 */
+			*conf = 0x00000028;
+		} else
+		if (idx == 1) {
+			*conn = 0x01010312; /* DVI, connector 0 */
+			*conf = 0x00020030;
+		} else
+		if (idx == 2) {
+			*conn = 0x01010310; /* VGA, connector 0 */
+			*conf = 0x00000028;
+		} else
+		if (idx == 3) {
+			*conn = 0x02022362; /* HDMI, connector 2 */
+			*conf = 0x00020010;
+		} else {
+			*conn = 0x0000000e; /* EOL */
+			*conf = 0x00000000;
+		}
+	}
+
 	return true;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c
index 3837090d66a..4cea35c57d1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_channel.c
+++ b/drivers/gpu/drm/nouveau/nouveau_channel.c
@@ -200,7 +200,7 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret,
 	/* disable the fifo caches */
 	pfifo->reassign(dev, false);
 
-	/* Construct inital RAMFC for new channel */
+	/* Construct initial RAMFC for new channel */
 	ret = pfifo->create_context(chan);
 	if (ret) {
 		nouveau_channel_put(&chan);
@@ -278,7 +278,7 @@ nouveau_channel_put_unlocked(struct nouveau_channel **pchan)
 		return;
 	}
 
-	/* noone wants the channel anymore */
+	/* no one wants the channel anymore */
 	NV_DEBUG(dev, "freeing channel %d\n", chan->id);
 	nouveau_debugfs_channel_fini(chan);
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c
index ce38e97b942..568caedd721 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dma.c
@@ -83,7 +83,7 @@ nouveau_dma_init(struct nouveau_channel *chan)
 		return ret;
 
 	/* NV_MEMORY_TO_MEMORY_FORMAT requires a notifier object */
-	ret = nouveau_notifier_alloc(chan, NvNotify0, 32, 0xfd0, 0x1000,
+	ret = nouveau_notifier_alloc(chan, NvNotify0, 32, 0xfe0, 0x1000,
 				     &chan->m2mf_ntfy);
 	if (ret)
 		return ret;
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index fff180a9986..a76514a209b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -216,7 +216,7 @@ struct nouveau_channel {
 	/* mapping of the fifo itself */
 	struct drm_local_map *map;
 
-	/* mapping of the regs controling the fifo */
+	/* mapping of the regs controlling the fifo */
 	void __iomem *user;
 	uint32_t user_get;
 	uint32_t user_put;
@@ -682,6 +682,9 @@ struct drm_nouveau_private {
 	/* For PFIFO and PGRAPH. */
 	spinlock_t context_switch_lock;
 
+	/* VM/PRAMIN flush, legacy PRAMIN aperture */
+	spinlock_t vm_lock;
+
 	/* RAMIN configuration, RAMFC, RAMHT and RAMRO offsets */
 	struct nouveau_ramht  *ramht;
 	struct nouveau_gpuobj *ramfc;
@@ -1190,7 +1193,7 @@ extern int  nv50_graph_load_context(struct nouveau_channel *);
 extern int  nv50_graph_unload_context(struct drm_device *);
 extern int  nv50_grctx_init(struct nouveau_grctx *);
 extern void nv50_graph_tlb_flush(struct drm_device *dev);
-extern void nv86_graph_tlb_flush(struct drm_device *dev);
+extern void nv84_graph_tlb_flush(struct drm_device *dev);
 extern struct nouveau_enum nv50_data_error_names[];
 
 /* nvc0_graph.c */
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 889c4454682..39aee6d4daf 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -181,13 +181,13 @@ nouveau_fbcon_sync(struct fb_info *info)
 		OUT_RING  (chan, 0);
 	}
 
-	nouveau_bo_wr32(chan->notifier_bo, chan->m2mf_ntfy + 3, 0xffffffff);
+	nouveau_bo_wr32(chan->notifier_bo, chan->m2mf_ntfy/4 + 3, 0xffffffff);
 	FIRE_RING(chan);
 	mutex_unlock(&chan->mutex);
 
 	ret = -EBUSY;
 	for (i = 0; i < 100000; i++) {
-		if (!nouveau_bo_rd32(chan->notifier_bo, chan->m2mf_ntfy + 3)) {
+		if (!nouveau_bo_rd32(chan->notifier_bo, chan->m2mf_ntfy/4 + 3)) {
 			ret = 0;
 			break;
 		}
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index e8b04f4aed7..b52e4601824 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -97,7 +97,7 @@ nouveau_gem_new(struct drm_device *dev, struct nouveau_channel *chan,
 		return -ENOMEM;
 	}
 
-	nvbo->bo.persistant_swap_storage = nvbo->gem->filp;
+	nvbo->bo.persistent_swap_storage = nvbo->gem->filp;
 	nvbo->gem->driver_private = nvbo;
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 2683377f413..c3e953b0899 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -152,8 +152,6 @@ nouveau_mem_vram_fini(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
-	nouveau_bo_ref(NULL, &dev_priv->vga_ram);
-
 	ttm_bo_device_release(&dev_priv->ttm.bdev);
 
 	nouveau_ttm_global_release(dev_priv);
@@ -398,7 +396,7 @@ nouveau_mem_vram_init(struct drm_device *dev)
 			dma_bits = 40;
 	} else
 	if (drm_pci_device_is_pcie(dev) &&
-	    dev_priv->chipset != 0x40 &&
+	    dev_priv->chipset  > 0x40 &&
 	    dev_priv->chipset != 0x45) {
 		if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(39)))
 			dma_bits = 39;
@@ -552,6 +550,7 @@ nouveau_mem_timing_init(struct drm_device *dev)
 	u8 tRC;		/* Byte 9 */
 	u8 tUNK_10, tUNK_11, tUNK_12, tUNK_13, tUNK_14;
 	u8 tUNK_18, tUNK_19, tUNK_20, tUNK_21;
+	u8 magic_number = 0; /* Yeah... sorry*/
 	u8 *mem = NULL, *entry;
 	int i, recordlen, entries;
 
@@ -596,6 +595,12 @@ nouveau_mem_timing_init(struct drm_device *dev)
 	if (!memtimings->timing)
 		return;
 
+	/* Get "some number" from the timing reg for NV_40
+	 * Used in calculations later */
+	if(dev_priv->card_type == NV_40) {
+		magic_number = (nv_rd32(dev,0x100228) & 0x0f000000) >> 24;
+	}
+
 	entry = mem + mem[1];
 	for (i = 0; i < entries; i++, entry += recordlen) {
 		struct nouveau_pm_memtiming *timing = &pm->memtimings.timing[i];
@@ -635,36 +640,51 @@ nouveau_mem_timing_init(struct drm_device *dev)
 
 		/* XXX: I don't trust the -1's and +1's... they must come
 		 *      from somewhere! */
-		timing->reg_100224 = ((tUNK_0 + tUNK_19 + 1) << 24 |
+		timing->reg_100224 = (tUNK_0 + tUNK_19 + 1 + magic_number) << 24 |
 				      tUNK_18 << 16 |
-				      (tUNK_1 + tUNK_19 + 1) << 8 |
-				      (tUNK_2 - 1));
+				      (tUNK_1 + tUNK_19 + 1 + magic_number) << 8;
+		if(dev_priv->chipset == 0xa8) {
+			timing->reg_100224 |= (tUNK_2 - 1);
+		} else {
+			timing->reg_100224 |= (tUNK_2 + 2 - magic_number);
+		}
 
 		timing->reg_100228 = (tUNK_12 << 16 | tUNK_11 << 8 | tUNK_10);
-		if(recordlen > 19) {
-			timing->reg_100228 += (tUNK_19 - 1) << 24;
-		}/* I cannot back-up this else-statement right now
-			 else {
-			timing->reg_100228 += tUNK_12 << 24;
-		}*/
-
-		/* XXX: reg_10022c */
-		timing->reg_10022c = tUNK_2 - 1;
-
-		timing->reg_100230 = (tUNK_20 << 24 | tUNK_21 << 16 |
-				      tUNK_13 << 8  | tUNK_13);
-
-		/* XXX: +6? */
-		timing->reg_100234 = (tRAS << 24 | (tUNK_19 + 6) << 8 | tRC);
-		timing->reg_100234 += max(tUNK_10,tUNK_11) << 16;
-
-		/* XXX; reg_100238, reg_10023c
-		 * reg: 0x00??????
-		 * reg_10023c:
-		 *      0 for pre-NV50 cards
-		 *      0x????0202 for NV50+ cards (empirical evidence) */
-		if(dev_priv->card_type >= NV_50) {
+		if(dev_priv->chipset >= 0xa3 && dev_priv->chipset < 0xaa) {
+			timing->reg_100228 |= (tUNK_19 - 1) << 24;
+		}
+
+		if(dev_priv->card_type == NV_40) {
+			/* NV40: don't know what the rest of the regs are..
+			 * And don't need to know either */
+			timing->reg_100228 |= 0x20200000 | magic_number << 24;
+		} else if(dev_priv->card_type >= NV_50) {
+			/* XXX: reg_10022c */
+			timing->reg_10022c = tUNK_2 - 1;
+
+			timing->reg_100230 = (tUNK_20 << 24 | tUNK_21 << 16 |
+						  tUNK_13 << 8  | tUNK_13);
+
+			timing->reg_100234 = (tRAS << 24 | tRC);
+			timing->reg_100234 += max(tUNK_10,tUNK_11) << 16;
+
+			if(dev_priv->chipset < 0xa3) {
+				timing->reg_100234 |= (tUNK_2 + 2) << 8;
+			} else {
+				/* XXX: +6? */
+				timing->reg_100234 |= (tUNK_19 + 6) << 8;
+			}
+
+			/* XXX; reg_100238, reg_10023c
+			 * reg_100238: 0x00??????
+			 * reg_10023c: 0x!!??0202 for NV50+ cards (empirical evidence) */
 			timing->reg_10023c = 0x202;
+			if(dev_priv->chipset < 0xa3) {
+				timing->reg_10023c |= 0x4000000 | (tUNK_2 - 1) << 16;
+			} else {
+				/* currently unknown
+				 * 10023c seen as 06xxxxxx, 0bxxxxxx or 0fxxxxxx */
+			}
 		}
 
 		NV_DEBUG(dev, "Entry %d: 220: %08x %08x %08x %08x\n", i,
@@ -675,7 +695,7 @@ nouveau_mem_timing_init(struct drm_device *dev)
 			 timing->reg_100238, timing->reg_10023c);
 	}
 
-	memtimings->nr_timing  = entries;
+	memtimings->nr_timing = entries;
 	memtimings->supported = true;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c
index 7ba3fc0b30c..5b39718ae1f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_notifier.c
+++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c
@@ -35,19 +35,22 @@ nouveau_notifier_init_channel(struct nouveau_channel *chan)
 {
 	struct drm_device *dev = chan->dev;
 	struct nouveau_bo *ntfy = NULL;
-	uint32_t flags;
+	uint32_t flags, ttmpl;
 	int ret;
 
-	if (nouveau_vram_notify)
+	if (nouveau_vram_notify) {
 		flags = NOUVEAU_GEM_DOMAIN_VRAM;
-	else
+		ttmpl = TTM_PL_FLAG_VRAM;
+	} else {
 		flags = NOUVEAU_GEM_DOMAIN_GART;
+		ttmpl = TTM_PL_FLAG_TT;
+	}
 
 	ret = nouveau_gem_new(dev, NULL, PAGE_SIZE, 0, flags, 0, 0, &ntfy);
 	if (ret)
 		return ret;
 
-	ret = nouveau_bo_pin(ntfy, flags);
+	ret = nouveau_bo_pin(ntfy, ttmpl);
 	if (ret)
 		goto out_err;
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c
index 4f00c87ed86..67a16e01ffa 100644
--- a/drivers/gpu/drm/nouveau/nouveau_object.c
+++ b/drivers/gpu/drm/nouveau/nouveau_object.c
@@ -1039,19 +1039,20 @@ nv_ro32(struct nouveau_gpuobj *gpuobj, u32 offset)
 {
 	struct drm_nouveau_private *dev_priv = gpuobj->dev->dev_private;
 	struct drm_device *dev = gpuobj->dev;
+	unsigned long flags;
 
 	if (gpuobj->pinst == ~0 || !dev_priv->ramin_available) {
 		u64  ptr = gpuobj->vinst + offset;
 		u32 base = ptr >> 16;
 		u32  val;
 
-		spin_lock(&dev_priv->ramin_lock);
+		spin_lock_irqsave(&dev_priv->vm_lock, flags);
 		if (dev_priv->ramin_base != base) {
 			dev_priv->ramin_base = base;
 			nv_wr32(dev, 0x001700, dev_priv->ramin_base);
 		}
 		val = nv_rd32(dev, 0x700000 + (ptr & 0xffff));
-		spin_unlock(&dev_priv->ramin_lock);
+		spin_unlock_irqrestore(&dev_priv->vm_lock, flags);
 		return val;
 	}
 
@@ -1063,18 +1064,19 @@ nv_wo32(struct nouveau_gpuobj *gpuobj, u32 offset, u32 val)
 {
 	struct drm_nouveau_private *dev_priv = gpuobj->dev->dev_private;
 	struct drm_device *dev = gpuobj->dev;
+	unsigned long flags;
 
 	if (gpuobj->pinst == ~0 || !dev_priv->ramin_available) {
 		u64  ptr = gpuobj->vinst + offset;
 		u32 base = ptr >> 16;
 
-		spin_lock(&dev_priv->ramin_lock);
+		spin_lock_irqsave(&dev_priv->vm_lock, flags);
 		if (dev_priv->ramin_base != base) {
 			dev_priv->ramin_base = base;
 			nv_wr32(dev, 0x001700, dev_priv->ramin_base);
 		}
 		nv_wr32(dev, 0x700000 + (ptr & 0xffff), val);
-		spin_unlock(&dev_priv->ramin_lock);
+		spin_unlock_irqrestore(&dev_priv->vm_lock, flags);
 		return;
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c
index ac62a1b8c4f..670e3cb697e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_perf.c
+++ b/drivers/gpu/drm/nouveau/nouveau_perf.c
@@ -134,7 +134,7 @@ nouveau_perf_init(struct drm_device *dev)
 		case 0x13:
 		case 0x15:
 			perflvl->fanspeed = entry[55];
-			perflvl->voltage = entry[56];
+			perflvl->voltage = (recordlen > 56) ? entry[56] : 0;
 			perflvl->core = ROM32(entry[1]) * 10;
 			perflvl->memory = ROM32(entry[5]) * 20;
 			break;
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index a33fe401928..c77111eca6a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -42,7 +42,8 @@ nouveau_sgdma_populate(struct ttm_backend *be, unsigned long num_pages,
 
 	nvbe->nr_pages = 0;
 	while (num_pages--) {
-		if (dma_addrs[nvbe->nr_pages] != DMA_ERROR_CODE) {
+		/* this code path isn't called and is incorrect anyways */
+		if (0) { /*dma_addrs[nvbe->nr_pages] != DMA_ERROR_CODE)*/
 			nvbe->pages[nvbe->nr_pages] =
 					dma_addrs[nvbe->nr_pages];
 		 	nvbe->ttm_alloced[nvbe->nr_pages] = true;
@@ -55,6 +56,7 @@ nouveau_sgdma_populate(struct ttm_backend *be, unsigned long num_pages,
 				be->func->clear(be);
 				return -EFAULT;
 			}
+			nvbe->ttm_alloced[nvbe->nr_pages] = false;
 		}
 
 		nvbe->nr_pages++;
@@ -427,7 +429,7 @@ nouveau_sgdma_init(struct drm_device *dev)
 	u32 aper_size, align;
 	int ret;
 
-	if (dev_priv->card_type >= NV_50 || drm_pci_device_is_pcie(dev))
+	if (dev_priv->card_type >= NV_40 && drm_pci_device_is_pcie(dev))
 		aper_size = 512 * 1024 * 1024;
 	else
 		aper_size = 64 * 1024 * 1024;
@@ -457,7 +459,7 @@ nouveau_sgdma_init(struct drm_device *dev)
 		dev_priv->gart_info.func = &nv50_sgdma_backend;
 	} else
 	if (drm_pci_device_is_pcie(dev) &&
-	    dev_priv->chipset != 0x40 && dev_priv->chipset != 0x45) {
+	    dev_priv->chipset > 0x40 && dev_priv->chipset != 0x45) {
 		if (nv44_graph_class(dev)) {
 			dev_priv->gart_info.func = &nv44_sgdma_backend;
 			align = 512 * 1024;
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index 4fcbd091a11..915fbce8959 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -376,15 +376,11 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->graph.destroy_context	= nv50_graph_destroy_context;
 		engine->graph.load_context	= nv50_graph_load_context;
 		engine->graph.unload_context	= nv50_graph_unload_context;
-		if (dev_priv->chipset != 0x86)
+		if (dev_priv->chipset == 0x50 ||
+		    dev_priv->chipset == 0xac)
 			engine->graph.tlb_flush	= nv50_graph_tlb_flush;
-		else {
-			/* from what i can see nvidia do this on every
-			 * pre-NVA3 board except NVAC, but, we've only
-			 * ever seen problems on NV86
-			 */
-			engine->graph.tlb_flush	= nv86_graph_tlb_flush;
-		}
+		else
+			engine->graph.tlb_flush	= nv84_graph_tlb_flush;
 		engine->fifo.channels		= 128;
 		engine->fifo.init		= nv50_fifo_init;
 		engine->fifo.takedown		= nv50_fifo_takedown;
@@ -612,6 +608,7 @@ nouveau_card_init(struct drm_device *dev)
 	spin_lock_init(&dev_priv->channels.lock);
 	spin_lock_init(&dev_priv->tile.lock);
 	spin_lock_init(&dev_priv->context_switch_lock);
+	spin_lock_init(&dev_priv->vm_lock);
 
 	/* Make the CRTCs and I2C buses accessible */
 	ret = engine->display.early_init(dev);
@@ -771,6 +768,11 @@ static void nouveau_card_takedown(struct drm_device *dev)
 	engine->mc.takedown(dev);
 	engine->display.late_takedown(dev);
 
+	if (dev_priv->vga_ram) {
+		nouveau_bo_unpin(dev_priv->vga_ram);
+		nouveau_bo_ref(NULL, &dev_priv->vga_ram);
+	}
+
 	mutex_lock(&dev->struct_mutex);
 	ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
 	ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT);
@@ -963,7 +965,7 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
 	if (ret)
 		goto err_mmio;
 
-	/* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
+	/* Map PRAMIN BAR, or on older cards, the aperture within BAR0 */
 	if (dev_priv->card_type >= NV_40) {
 		int ramin_bar = 2;
 		if (pci_resource_len(dev->pdev, ramin_bar) == 0)
diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c
index a260fbbe3d9..748b9d9c294 100644
--- a/drivers/gpu/drm/nouveau/nv04_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv04_crtc.c
@@ -164,7 +164,7 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode)
 	NV_DEBUG_KMS(dev, "Setting dpms mode %d on CRTC %d\n", mode,
 							nv_crtc->index);
 
-	if (nv_crtc->last_dpms == mode) /* Don't do unnecesary mode changes. */
+	if (nv_crtc->last_dpms == mode) /* Don't do unnecessary mode changes. */
 		return;
 
 	nv_crtc->last_dpms = mode;
@@ -677,7 +677,7 @@ static void nv_crtc_prepare(struct drm_crtc *crtc)
 
 	NVBlankScreen(dev, nv_crtc->index, true);
 
-	/* Some more preperation. */
+	/* Some more preparation. */
 	NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA);
 	if (dev_priv->card_type == NV_40) {
 		uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900);
diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c
index c82db37d9f4..12098bf839c 100644
--- a/drivers/gpu/drm/nouveau/nv04_dfp.c
+++ b/drivers/gpu/drm/nouveau/nv04_dfp.c
@@ -581,12 +581,13 @@ static void nv04_dfp_restore(struct drm_encoder *encoder)
 	int head = nv_encoder->restore.head;
 
 	if (nv_encoder->dcb->type == OUTPUT_LVDS) {
-		struct drm_display_mode *native_mode = nouveau_encoder_connector_get(nv_encoder)->native_mode;
-		if (native_mode)
-			call_lvds_script(dev, nv_encoder->dcb, head, LVDS_PANEL_ON,
-					 native_mode->clock);
-		else
-			NV_ERROR(dev, "Not restoring LVDS without native mode\n");
+		struct nouveau_connector *connector =
+			nouveau_encoder_connector_get(nv_encoder);
+
+		if (connector && connector->native_mode)
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_ON,
+					 connector->native_mode->clock);
 
 	} else if (nv_encoder->dcb->type == OUTPUT_TMDS) {
 		int clock = nouveau_hw_pllvals_to_clk
diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c
index 18d30c2c1aa..fceb44c0ec7 100644
--- a/drivers/gpu/drm/nouveau/nv40_graph.c
+++ b/drivers/gpu/drm/nouveau/nv40_graph.c
@@ -181,7 +181,7 @@ nv40_graph_load_context(struct nouveau_channel *chan)
 		  NV40_PGRAPH_CTXCTL_CUR_LOADED);
 	/* 0x32E0 records the instance address of the active FIFO's PGRAPH
 	 * context.  If at any time this doesn't match 0x40032C, you will
-	 * recieve PGRAPH_INTR_CONTEXT_SWITCH
+	 * receive PGRAPH_INTR_CONTEXT_SWITCH
 	 */
 	nv_wr32(dev, NV40_PFIFO_GRCTX_INSTANCE, inst);
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c
index 2b9984027f4..a19ccaa025b 100644
--- a/drivers/gpu/drm/nouveau/nv50_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv50_crtc.c
@@ -469,9 +469,6 @@ nv50_crtc_wait_complete(struct drm_crtc *crtc)
 
 	start = ptimer->read(dev);
 	do {
-		nv_wr32(dev, 0x61002c, 0x370);
-		nv_wr32(dev, 0x000140, 1);
-
 		if (nv_ro32(disp->ntfy, 0x000))
 			return 0;
 	} while (ptimer->read(dev) - start < 2000000000ULL);
diff --git a/drivers/gpu/drm/nouveau/nv50_evo.c b/drivers/gpu/drm/nouveau/nv50_evo.c
index a2cfaa691e9..c8e83c1a4de 100644
--- a/drivers/gpu/drm/nouveau/nv50_evo.c
+++ b/drivers/gpu/drm/nouveau/nv50_evo.c
@@ -186,6 +186,7 @@ nv50_evo_channel_init(struct nouveau_channel *evo)
 	nv_mask(dev, 0x610028, 0x00000000, 0x00010001 << id);
 
 	evo->dma.max = (4096/4) - 2;
+	evo->dma.max &= ~7;
 	evo->dma.put = 0;
 	evo->dma.cur = evo->dma.put;
 	evo->dma.free = evo->dma.max - evo->dma.cur;
diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c
index 8675b00caf1..b02a5b1e7d3 100644
--- a/drivers/gpu/drm/nouveau/nv50_graph.c
+++ b/drivers/gpu/drm/nouveau/nv50_graph.c
@@ -503,7 +503,7 @@ nv50_graph_tlb_flush(struct drm_device *dev)
 }
 
 void
-nv86_graph_tlb_flush(struct drm_device *dev)
+nv84_graph_tlb_flush(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c
index a6f8aa651fc..4f95a1e5822 100644
--- a/drivers/gpu/drm/nouveau/nv50_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv50_instmem.c
@@ -404,23 +404,25 @@ void
 nv50_instmem_flush(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	unsigned long flags;
 
-	spin_lock(&dev_priv->ramin_lock);
+	spin_lock_irqsave(&dev_priv->vm_lock, flags);
 	nv_wr32(dev, 0x00330c, 0x00000001);
 	if (!nv_wait(dev, 0x00330c, 0x00000002, 0x00000000))
 		NV_ERROR(dev, "PRAMIN flush timeout\n");
-	spin_unlock(&dev_priv->ramin_lock);
+	spin_unlock_irqrestore(&dev_priv->vm_lock, flags);
 }
 
 void
 nv84_instmem_flush(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	unsigned long flags;
 
-	spin_lock(&dev_priv->ramin_lock);
+	spin_lock_irqsave(&dev_priv->vm_lock, flags);
 	nv_wr32(dev, 0x070000, 0x00000001);
 	if (!nv_wait(dev, 0x070000, 0x00000002, 0x00000000))
 		NV_ERROR(dev, "PRAMIN flush timeout\n");
-	spin_unlock(&dev_priv->ramin_lock);
+	spin_unlock_irqrestore(&dev_priv->vm_lock, flags);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv50_vm.c b/drivers/gpu/drm/nouveau/nv50_vm.c
index 4fd3432b5b8..6c269449074 100644
--- a/drivers/gpu/drm/nouveau/nv50_vm.c
+++ b/drivers/gpu/drm/nouveau/nv50_vm.c
@@ -174,10 +174,11 @@ void
 nv50_vm_flush_engine(struct drm_device *dev, int engine)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	unsigned long flags;
 
-	spin_lock(&dev_priv->ramin_lock);
+	spin_lock_irqsave(&dev_priv->vm_lock, flags);
 	nv_wr32(dev, 0x100c80, (engine << 16) | 1);
 	if (!nv_wait(dev, 0x100c80, 0x00000001, 0x00000000))
 		NV_ERROR(dev, "vm flush timeout: engine %d\n", engine);
-	spin_unlock(&dev_priv->ramin_lock);
+	spin_unlock_irqrestore(&dev_priv->vm_lock, flags);
 }
diff --git a/drivers/gpu/drm/nouveau/nvc0_vm.c b/drivers/gpu/drm/nouveau/nvc0_vm.c
index 69af0ba7edd..a179e6c55af 100644
--- a/drivers/gpu/drm/nouveau/nvc0_vm.c
+++ b/drivers/gpu/drm/nouveau/nvc0_vm.c
@@ -104,20 +104,27 @@ nvc0_vm_flush(struct nouveau_vm *vm)
 	struct nouveau_instmem_engine *pinstmem = &dev_priv->engine.instmem;
 	struct drm_device *dev = vm->dev;
 	struct nouveau_vm_pgd *vpgd;
-	u32 r100c80, engine;
+	unsigned long flags;
+	u32 engine = (dev_priv->chan_vm == vm) ? 1 : 5;
 
 	pinstmem->flush(vm->dev);
 
-	if (vm == dev_priv->chan_vm)
-		engine = 1;
-	else
-		engine = 5;
-
+	spin_lock_irqsave(&dev_priv->vm_lock, flags);
 	list_for_each_entry(vpgd, &vm->pgd_list, head) {
-		r100c80 = nv_rd32(dev, 0x100c80);
+		/* looks like maybe a "free flush slots" counter, the
+		 * faster you write to 0x100cbc to more it decreases
+		 */
+		if (!nv_wait_ne(dev, 0x100c80, 0x00ff0000, 0x00000000)) {
+			NV_ERROR(dev, "vm timeout 0: 0x%08x %d\n",
+				 nv_rd32(dev, 0x100c80), engine);
+		}
 		nv_wr32(dev, 0x100cb8, vpgd->obj->vinst >> 8);
 		nv_wr32(dev, 0x100cbc, 0x80000000 | engine);
-		if (!nv_wait(dev, 0x100c80, 0xffffffff, r100c80))
-			NV_ERROR(dev, "vm flush timeout eng %d\n", engine);
+		/* wait for flush to be queued? */
+		if (!nv_wait(dev, 0x100c80, 0x00008000, 0x00008000)) {
+			NV_ERROR(dev, "vm timeout 1: 0x%08x %d\n",
+				 nv_rd32(dev, 0x100c80), engine);
+		}
 	}
+	spin_unlock_irqrestore(&dev_priv->vm_lock, flags);
 }
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index 258fa5e7a2d..7bd74568909 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -32,6 +32,7 @@
 #include "atom.h"
 #include "atom-names.h"
 #include "atom-bits.h"
+#include "radeon.h"
 
 #define ATOM_COND_ABOVE		0
 #define ATOM_COND_ABOVEOREQUAL	1
@@ -101,7 +102,9 @@ static void debug_print_spaces(int n)
 static uint32_t atom_iio_execute(struct atom_context *ctx, int base,
 				 uint32_t index, uint32_t data)
 {
+	struct radeon_device *rdev = ctx->card->dev->dev_private;
 	uint32_t temp = 0xCDCDCDCD;
+
 	while (1)
 		switch (CU8(base)) {
 		case ATOM_IIO_NOP:
@@ -112,7 +115,8 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base,
 			base += 3;
 			break;
 		case ATOM_IIO_WRITE:
-			(void)ctx->card->ioreg_read(ctx->card, CU16(base + 1));
+			if (rdev->family == CHIP_RV515)
+				(void)ctx->card->ioreg_read(ctx->card, CU16(base + 1));
 			ctx->card->ioreg_write(ctx->card, CU16(base + 1), temp);
 			base += 3;
 			break;
@@ -131,7 +135,7 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base,
 		case ATOM_IIO_MOVE_INDEX:
 			temp &=
 			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
-			      CU8(base + 2));
+			      CU8(base + 3));
 			temp |=
 			    ((index >> CU8(base + 2)) &
 			     (0xFFFFFFFF >> (32 - CU8(base + 1)))) << CU8(base +
@@ -141,7 +145,7 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base,
 		case ATOM_IIO_MOVE_DATA:
 			temp &=
 			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
-			      CU8(base + 2));
+			      CU8(base + 3));
 			temp |=
 			    ((data >> CU8(base + 2)) &
 			     (0xFFFFFFFF >> (32 - CU8(base + 1)))) << CU8(base +
@@ -151,7 +155,7 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base,
 		case ATOM_IIO_MOVE_ATTR:
 			temp &=
 			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
-			      CU8(base + 2));
+			      CU8(base + 3));
 			temp |=
 			    ((ctx->
 			      io_attr >> CU8(base + 2)) & (0xFFFFFFFF >> (32 -
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 04b269d14a5..7fd88497b93 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -738,13 +738,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V3
 {
 #if ATOM_BIG_ENDIAN
     UCHAR ucReserved1:1;
-    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
     UCHAR ucReserved:3;
     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
 #else
     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
     UCHAR ucReserved:3;
-    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
     UCHAR ucReserved1:1;
 #endif
 }ATOM_DIG_ENCODER_CONFIG_V3;
@@ -785,13 +785,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
 {
 #if ATOM_BIG_ENDIAN
     UCHAR ucReserved1:1;
-    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
     UCHAR ucReserved:2;
     UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
 #else
     UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
     UCHAR ucReserved:2;
-    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
     UCHAR ucReserved1:1;
 #endif
 }ATOM_DIG_ENCODER_CONFIG_V4;
@@ -2126,7 +2126,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
 // Structures used in FirmwareInfoTable
 /****************************************************************************/	
 
-// usBIOSCapability Defintion:
+// usBIOSCapability Definition:
 // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; 
 // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; 
 // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; 
@@ -3341,7 +3341,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_INFO
 /****************************************************************************/	
 // Structure used in AnalogTV_InfoTable (Top level)
 /****************************************************************************/	
-//ucTVBootUpDefaultStd definiton:
+//ucTVBootUpDefaultStd definition:
 
 //ATOM_TV_NTSC                1
 //ATOM_TV_NTSCJ               2
@@ -3816,7 +3816,7 @@ typedef  struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
   UCHAR                    Reserved [6];                          // for potential expansion
 }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
 
-//Related definitions, all records are differnt but they have a commond header
+//Related definitions, all records are different but they have a commond header
 typedef struct _ATOM_COMMON_RECORD_HEADER
 {
   UCHAR               ucRecordType;                      //An emun to indicate the record type
@@ -4365,14 +4365,14 @@ ucUMAChannelNumber:      	        System memory channel numbers.
 ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
 ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
 ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
-sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high  
+sAvail_SCLK[5]:                   Arrays to provide available list of SLCK and corresponding voltage, order from low to high  
 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. 
 ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. 
 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
 ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
 ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
-usPCIEClkSSPercentage:            PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
-usPCIEClkSSType:                  PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usPCIEClkSSPercentage:            PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType:                  PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
 usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. 
 usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. 
 usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting. 
@@ -4555,7 +4555,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S0_CRT1_MONOb0             0x01
 #define ATOM_S0_CRT1_COLORb0            0x02
 #define ATOM_S0_CRT1_MASKb0             (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
@@ -4621,7 +4621,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK   0xC0000000L
 
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S2_TV1_STANDARD_MASKb0     0x0F
 #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
 #define ATOM_S2_DEVICE_DPMS_STATEb2     0x01
@@ -4671,7 +4671,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S3_ALLOW_FAST_PWR_SWITCH   0x40000000L
 #define ATOM_S3_RQST_GPU_USE_MIN_PWR    0x80000000L
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S3_CRT1_ACTIVEb0           0x01
 #define ATOM_S3_LCD1_ACTIVEb0           0x02
 #define ATOM_S3_TV1_ACTIVEb0            0x04
@@ -4707,7 +4707,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S4_LCD1_REFRESH_MASK       0x0000FF00L
 #define ATOM_S4_LCD1_REFRESH_SHIFT      8
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S4_LCD1_PANEL_ID_MASKb0	  0x0FF
 #define ATOM_S4_LCD1_REFRESH_MASKb1		  ATOM_S4_LCD1_PANEL_ID_MASKb0
 #define ATOM_S4_VRAM_INFO_MASKb2        ATOM_S4_LCD1_PANEL_ID_MASKb0
@@ -4786,7 +4786,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE       0x40000000L
 #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK  0x80000000L
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S6_DEVICE_CHANGEb0         0x01
 #define ATOM_S6_SCALER_CHANGEb0         0x02
 #define ATOM_S6_LID_CHANGEb0            0x04
@@ -5027,7 +5027,7 @@ typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
 
 typedef struct _MEMORY_CLEAN_UP_PARAMETERS
 {
-  USHORT  usMemoryStart;                //in 8Kb boundry, offset from memory base address
+  USHORT  usMemoryStart;                //in 8Kb boundary, offset from memory base address
   USHORT  usMemorySize;                 //8Kb blocks aligned
 }MEMORY_CLEAN_UP_PARAMETERS;
 #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
@@ -6855,7 +6855,7 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
 /**************************************************************************/
 
 
-// Following definitions are for compatiblity issue in different SW components. 
+// Following definitions are for compatibility issue in different SW components. 
 #define ATOM_MASTER_DATA_TABLE_REVISION   0x01
 #define Object_Info												Object_Header			
 #define	AdjustARB_SEQ											MC_InitParameter
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 10e41af6b02..529a3a70473 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -531,6 +531,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 			pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
 		else
 			pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+
+		if (rdev->family < CHIP_RV770)
+			pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
 	} else {
 		pll->flags |= RADEON_PLL_LEGACY;
 
@@ -559,7 +562,6 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
 				if (ss_enabled) {
 					if (ss->refdiv) {
-						pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
 						pll->flags |= RADEON_PLL_USE_REF_DIV;
 						pll->reference_div = ss->refdiv;
 						if (ASIC_IS_AVIVO(rdev))
@@ -1009,6 +1011,7 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
 	uint64_t fb_location;
 	uint32_t fb_format, fb_pitch_pixels, tiling_flags;
 	u32 fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_NONE);
+	u32 tmp;
 	int r;
 
 	/* no fb bound */
@@ -1137,6 +1140,15 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
 	WREG32(EVERGREEN_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
 	       (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
 
+	/* pageflip setup */
+	/* make sure flip is at vb rather than hb */
+	tmp = RREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
+	tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN;
+	WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
+
+	/* set pageflip to happen anywhere in vblank interval */
+	WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
+
 	if (!atomic && fb && fb != crtc->fb) {
 		radeon_fb = to_radeon_framebuffer(fb);
 		rbo = gem_to_radeon_bo(radeon_fb->obj);
@@ -1167,6 +1179,7 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc,
 	uint64_t fb_location;
 	uint32_t fb_format, fb_pitch_pixels, tiling_flags;
 	u32 fb_swap = R600_D1GRPH_SWAP_ENDIAN_NONE;
+	u32 tmp;
 	int r;
 
 	/* no fb bound */
@@ -1294,6 +1307,15 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc,
 	WREG32(AVIVO_D1MODE_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
 	       (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
 
+	/* pageflip setup */
+	/* make sure flip is at vb rather than hb */
+	tmp = RREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
+	tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN;
+	WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
+
+	/* set pageflip to happen anywhere in vblank interval */
+	WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
+
 	if (!atomic && fb && fb != crtc->fb) {
 		radeon_fb = to_radeon_framebuffer(fb);
 		rbo = gem_to_radeon_bo(radeon_fb->obj);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 941080a7794..9073e3bfb08 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -43,17 +43,6 @@ static void evergreen_pcie_gen2_enable(struct radeon_device *rdev);
 
 void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc)
 {
-	struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc];
-	u32 tmp;
-
-	/* make sure flip is at vb rather than hb */
-	tmp = RREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
-	tmp &= ~EVERGREEN_GRPH_SURFACE_UPDATE_H_RETRACE_EN;
-	WREG32(EVERGREEN_GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
-
-	/* set pageflip to happen anywhere in vblank interval */
-	WREG32(EVERGREEN_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
-
 	/* enable the pflip int */
 	radeon_irq_kms_pflip_irq_get(rdev, crtc);
 }
@@ -131,11 +120,16 @@ void evergreen_pm_misc(struct radeon_device *rdev)
 	struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
 	struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
 
-	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
-		if (voltage->voltage != rdev->pm.current_vddc) {
-			radeon_atom_set_voltage(rdev, voltage->voltage);
+	if (voltage->type == VOLTAGE_SW) {
+		if (voltage->voltage && (voltage->voltage != rdev->pm.current_vddc)) {
+			radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
 			rdev->pm.current_vddc = voltage->voltage;
-			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+			DRM_DEBUG("Setting: vddc: %d\n", voltage->voltage);
+		}
+		if (voltage->vddci && (voltage->vddci != rdev->pm.current_vddci)) {
+			radeon_atom_set_voltage(rdev, voltage->vddci, SET_VOLTAGE_TYPE_ASIC_VDDCI);
+			rdev->pm.current_vddci = voltage->vddci;
+			DRM_DEBUG("Setting: vddci: %d\n", voltage->vddci);
 		}
 	}
 }
@@ -359,7 +353,7 @@ static u32 evergreen_line_buffer_adjust(struct radeon_device *rdev,
 					struct drm_display_mode *mode,
 					struct drm_display_mode *other_mode)
 {
-	u32 tmp = 0;
+	u32 tmp;
 	/*
 	 * Line Buffer Setup
 	 * There are 3 line buffers, each one shared by 2 display controllers.
@@ -369,64 +363,63 @@ static u32 evergreen_line_buffer_adjust(struct radeon_device *rdev,
 	 * first display controller
 	 *  0 - first half of lb (3840 * 2)
 	 *  1 - first 3/4 of lb (5760 * 2)
-	 *  2 - whole lb (7680 * 2)
+	 *  2 - whole lb (7680 * 2), other crtc must be disabled
 	 *  3 - first 1/4 of lb (1920 * 2)
 	 * second display controller
 	 *  4 - second half of lb (3840 * 2)
 	 *  5 - second 3/4 of lb (5760 * 2)
-	 *  6 - whole lb (7680 * 2)
+	 *  6 - whole lb (7680 * 2), other crtc must be disabled
 	 *  7 - last 1/4 of lb (1920 * 2)
 	 */
-	if (mode && other_mode) {
-		if (mode->hdisplay > other_mode->hdisplay) {
-			if (mode->hdisplay > 2560)
-				tmp = 1; /* 3/4 */
-			else
-				tmp = 0; /* 1/2 */
-		} else if (other_mode->hdisplay > mode->hdisplay) {
-			if (other_mode->hdisplay > 2560)
-				tmp = 3; /* 1/4 */
-			else
-				tmp = 0; /* 1/2 */
-		} else
+	/* this can get tricky if we have two large displays on a paired group
+	 * of crtcs.  Ideally for multiple large displays we'd assign them to
+	 * non-linked crtcs for maximum line buffer allocation.
+	 */
+	if (radeon_crtc->base.enabled && mode) {
+		if (other_mode)
 			tmp = 0; /* 1/2 */
-	} else if (mode)
-		tmp = 2; /* whole */
-	else if (other_mode)
-		tmp = 3; /* 1/4 */
+		else
+			tmp = 2; /* whole */
+	} else
+		tmp = 0;
 
 	/* second controller of the pair uses second half of the lb */
 	if (radeon_crtc->crtc_id % 2)
 		tmp += 4;
 	WREG32(DC_LB_MEMORY_SPLIT + radeon_crtc->crtc_offset, tmp);
 
-	switch (tmp) {
-	case 0:
-	case 4:
-	default:
-		if (ASIC_IS_DCE5(rdev))
-			return 4096 * 2;
-		else
-			return 3840 * 2;
-	case 1:
-	case 5:
-		if (ASIC_IS_DCE5(rdev))
-			return 6144 * 2;
-		else
-			return 5760 * 2;
-	case 2:
-	case 6:
-		if (ASIC_IS_DCE5(rdev))
-			return 8192 * 2;
-		else
-			return 7680 * 2;
-	case 3:
-	case 7:
-		if (ASIC_IS_DCE5(rdev))
-			return 2048 * 2;
-		else
-			return 1920 * 2;
+	if (radeon_crtc->base.enabled && mode) {
+		switch (tmp) {
+		case 0:
+		case 4:
+		default:
+			if (ASIC_IS_DCE5(rdev))
+				return 4096 * 2;
+			else
+				return 3840 * 2;
+		case 1:
+		case 5:
+			if (ASIC_IS_DCE5(rdev))
+				return 6144 * 2;
+			else
+				return 5760 * 2;
+		case 2:
+		case 6:
+			if (ASIC_IS_DCE5(rdev))
+				return 8192 * 2;
+			else
+				return 7680 * 2;
+		case 3:
+		case 7:
+			if (ASIC_IS_DCE5(rdev))
+				return 2048 * 2;
+			else
+				return 1920 * 2;
+		}
 	}
+
+	/* controller not enabled, so no lb used */
+	return 0;
 }
 
 static u32 evergreen_get_number_of_dram_channels(struct radeon_device *rdev)
@@ -869,9 +862,15 @@ int evergreen_pcie_gart_enable(struct radeon_device *rdev)
 		SYSTEM_ACCESS_MODE_NOT_IN_SYS |
 		SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU |
 		EFFECTIVE_L1_TLB_SIZE(5) | EFFECTIVE_L1_QUEUE_SIZE(5);
-	WREG32(MC_VM_MD_L1_TLB0_CNTL, tmp);
-	WREG32(MC_VM_MD_L1_TLB1_CNTL, tmp);
-	WREG32(MC_VM_MD_L1_TLB2_CNTL, tmp);
+	if (rdev->flags & RADEON_IS_IGP) {
+		WREG32(FUS_MC_VM_MD_L1_TLB0_CNTL, tmp);
+		WREG32(FUS_MC_VM_MD_L1_TLB1_CNTL, tmp);
+		WREG32(FUS_MC_VM_MD_L1_TLB2_CNTL, tmp);
+	} else {
+		WREG32(MC_VM_MD_L1_TLB0_CNTL, tmp);
+		WREG32(MC_VM_MD_L1_TLB1_CNTL, tmp);
+		WREG32(MC_VM_MD_L1_TLB2_CNTL, tmp);
+	}
 	WREG32(MC_VM_MB_L1_TLB0_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
@@ -1781,7 +1780,10 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 
 
 	mc_shared_chmap = RREG32(MC_SHARED_CHMAP);
-	mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG);
+	if (rdev->flags & RADEON_IS_IGP)
+		mc_arb_ramcfg = RREG32(FUS_MC_ARB_RAMCFG);
+	else
+		mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG);
 
 	switch (rdev->config.evergreen.max_tile_pipes) {
 	case 1:
@@ -2587,7 +2589,7 @@ static inline u32 evergreen_get_ih_wptr(struct radeon_device *rdev)
 	u32 wptr, tmp;
 
 	if (rdev->wb.enabled)
-		wptr = rdev->wb.wb[R600_WB_IH_WPTR_OFFSET/4];
+		wptr = le32_to_cpu(rdev->wb.wb[R600_WB_IH_WPTR_OFFSET/4]);
 	else
 		wptr = RREG32(IH_RB_WPTR);
 
@@ -2930,11 +2932,6 @@ static int evergreen_startup(struct radeon_device *rdev)
 		rdev->asic->copy = NULL;
 		dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
 	}
-	/* XXX: ontario has problems blitting to gart at the moment */
-	if (rdev->family == CHIP_PALM) {
-		rdev->asic->copy = NULL;
-		radeon_ttm_set_active_vram_size(rdev, rdev->mc.visible_vram_size);
-	}
 
 	/* allocate wb buffer */
 	r = radeon_wb_init(rdev);
@@ -3047,9 +3044,6 @@ int evergreen_init(struct radeon_device *rdev)
 {
 	int r;
 
-	r = radeon_dummy_page_init(rdev);
-	if (r)
-		return r;
 	/* This don't do much */
 	r = radeon_gem_init(rdev);
 	if (r)
@@ -3161,7 +3155,6 @@ void evergreen_fini(struct radeon_device *rdev)
 	radeon_atombios_fini(rdev);
 	kfree(rdev->bios);
 	rdev->bios = NULL;
-	radeon_dummy_page_fini(rdev);
 }
 
 static void evergreen_pcie_gen2_enable(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index edde90b3755..23d36417158 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -442,7 +442,7 @@ static inline int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u3
 	}
 	ib = p->ib->ptr;
 	switch (reg) {
-	/* force following reg to 0 in an attemp to disable out buffer
+	/* force following reg to 0 in an attempt to disable out buffer
 	 * which will need us to better understand how it works to perform
 	 * security check on it (Jerome)
 	 */
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 9aaa3f0c937..fc40e0cc345 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -200,6 +200,7 @@
 #define		BURSTLENGTH_SHIFT				9
 #define		BURSTLENGTH_MASK				0x00000200
 #define		CHANSIZE_OVERRIDE				(1 << 11)
+#define	FUS_MC_ARB_RAMCFG				0x2768
 #define	MC_VM_AGP_TOP					0x2028
 #define	MC_VM_AGP_BOT					0x202C
 #define	MC_VM_AGP_BASE					0x2030
@@ -221,6 +222,11 @@
 #define	MC_VM_MD_L1_TLB0_CNTL				0x2654
 #define	MC_VM_MD_L1_TLB1_CNTL				0x2658
 #define	MC_VM_MD_L1_TLB2_CNTL				0x265C
+
+#define	FUS_MC_VM_MD_L1_TLB0_CNTL			0x265C
+#define	FUS_MC_VM_MD_L1_TLB1_CNTL			0x2660
+#define	FUS_MC_VM_MD_L1_TLB2_CNTL			0x2664
+
 #define	MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR		0x203C
 #define	MC_VM_SYSTEM_APERTURE_HIGH_ADDR			0x2038
 #define	MC_VM_SYSTEM_APERTURE_LOW_ADDR			0x2034
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 7aade20f63a..3d8a7634bbe 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -674,7 +674,7 @@ static void cayman_gpu_init(struct radeon_device *rdev)
 
 	cc_rb_backend_disable = RREG32(CC_RB_BACKEND_DISABLE);
 	cc_gc_shader_pipe_config = RREG32(CC_GC_SHADER_PIPE_CONFIG);
-	cgts_tcc_disable = RREG32(CGTS_TCC_DISABLE);
+	cgts_tcc_disable = 0xff000000;
 	gc_user_rb_backend_disable = RREG32(GC_USER_RB_BACKEND_DISABLE);
 	gc_user_shader_pipe_config = RREG32(GC_USER_SHADER_PIPE_CONFIG);
 	cgts_user_tcc_disable = RREG32(CGTS_USER_TCC_DISABLE);
@@ -871,7 +871,7 @@ static void cayman_gpu_init(struct radeon_device *rdev)
 
 	smx_dc_ctl0 = RREG32(SMX_DC_CTL0);
 	smx_dc_ctl0 &= ~NUMBER_OF_SETS(0x1ff);
-	smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
+	smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.cayman.sx_num_of_sets);
 	WREG32(SMX_DC_CTL0, smx_dc_ctl0);
 
 	WREG32(SPI_CONFIG_CNTL_1, VTX_DONE_DELAY(4) | CRC_SIMD_ID_WADDR_DISABLE);
@@ -887,20 +887,20 @@ static void cayman_gpu_init(struct radeon_device *rdev)
 
 	WREG32(TA_CNTL_AUX, DISABLE_CUBE_ANISO);
 
-	WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
-					POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
-					SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
+	WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.cayman.sx_max_export_size / 4) - 1) |
+					POSITION_BUFFER_SIZE((rdev->config.cayman.sx_max_export_pos_size / 4) - 1) |
+					SMX_BUFFER_SIZE((rdev->config.cayman.sx_max_export_smx_size / 4) - 1)));
 
-	WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.evergreen.sc_prim_fifo_size) |
-				 SC_HIZ_TILE_FIFO_SIZE(rdev->config.evergreen.sc_hiz_tile_fifo_size) |
-				 SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.evergreen.sc_earlyz_tile_fifo_size)));
+	WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.cayman.sc_prim_fifo_size) |
+				 SC_HIZ_TILE_FIFO_SIZE(rdev->config.cayman.sc_hiz_tile_fifo_size) |
+				 SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.cayman.sc_earlyz_tile_fifo_size)));
 
 
 	WREG32(VGT_NUM_INSTANCES, 1);
 
 	WREG32(CP_PERFMON_CNTL, 0);
 
-	WREG32(SQ_MS_FIFO_SIZES, (CACHE_FIFO_SIZE(16 * rdev->config.evergreen.sq_num_cf_insts) |
+	WREG32(SQ_MS_FIFO_SIZES, (CACHE_FIFO_SIZE(16 * rdev->config.cayman.sq_num_cf_insts) |
 				  FETCH_FIFO_HIWATER(0x4) |
 				  DONE_FIFO_HIWATER(0xe0) |
 				  ALU_UPDATE_FIFO_HIWATER(0x8)));
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 8713731fa01..55a7f190027 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -437,7 +437,7 @@ int r300_asic_reset(struct radeon_device *rdev)
 	status = RREG32(R_000E40_RBBM_STATUS);
 	dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status);
 	/* resetting the CP seems to be problematic sometimes it end up
-	 * hard locking the computer, but it's necessary for successfull
+	 * hard locking the computer, but it's necessary for successful
 	 * reset more test & playing is needed on R3XX/R4XX to find a
 	 * reliable (if any solution)
 	 */
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index f0bce399c9f..00c0d2ba22d 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -608,7 +608,7 @@
  * My guess is that there are two bits for each zbias primitive
  * (FILL, LINE, POINT).
  *  One to enable depth test and one for depth write.
- * Yet this doesnt explain why depth writes work ...
+ * Yet this doesn't explain why depth writes work ...
  */
 #define R300_RE_OCCLUSION_CNTL		    0x42B4
 #	define R300_OCCLUSION_ON		(1<<1)
@@ -817,7 +817,7 @@
 #	define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST        (6  <<  11)
 #	define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR         (10 <<  11)
 
-/* NOTE: NEAREST doesnt seem to exist.
+/* NOTE: NEAREST doesn't seem to exist.
  * Im not seting MAG_FILTER_MASK and (3 << 11) on for all
  * anisotropy modes because that would void selected mag filter
  */
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index be271c42de4..6f27593901c 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -587,7 +587,7 @@ void r600_pm_misc(struct radeon_device *rdev)
 
 	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
 		if (voltage->voltage != rdev->pm.current_vddc) {
-			radeon_atom_set_voltage(rdev, voltage->voltage);
+			radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
 			rdev->pm.current_vddc = voltage->voltage;
 			DRM_DEBUG_DRIVER("Setting: v: %d\n", voltage->voltage);
 		}
@@ -2509,9 +2509,6 @@ int r600_init(struct radeon_device *rdev)
 {
 	int r;
 
-	r = radeon_dummy_page_init(rdev);
-	if (r)
-		return r;
 	if (r600_debugfs_mc_info_init(rdev)) {
 		DRM_ERROR("Failed to register debugfs file for mc !\n");
 	}
@@ -2625,7 +2622,6 @@ void r600_fini(struct radeon_device *rdev)
 	radeon_atombios_fini(rdev);
 	kfree(rdev->bios);
 	rdev->bios = NULL;
-	radeon_dummy_page_fini(rdev);
 }
 
 
@@ -3235,7 +3231,7 @@ static inline u32 r600_get_ih_wptr(struct radeon_device *rdev)
 	u32 wptr, tmp;
 
 	if (rdev->wb.enabled)
-		wptr = rdev->wb.wb[R600_WB_IH_WPTR_OFFSET/4];
+		wptr = le32_to_cpu(rdev->wb.wb[R600_WB_IH_WPTR_OFFSET/4]);
 	else
 		wptr = RREG32(IH_RB_WPTR);
 
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 3324620b2db..fd18be9871a 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -921,7 +921,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 		return 0;
 	ib = p->ib->ptr;
 	switch (reg) {
-	/* force following reg to 0 in an attemp to disable out buffer
+	/* force following reg to 0 in an attempt to disable out buffer
 	 * which will need us to better understand how it works to perform
 	 * security check on it (Jerome)
 	 */
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 50db6d62eec..f5ac7e788d8 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -334,7 +334,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
 	r600_hdmi_videoinfoframe(encoder, RGB, 0, 0, 0, 0,
 		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
 
-	/* it's unknown what these bits do excatly, but it's indeed quite usefull for debugging */
+	/* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */
 	WREG32(offset+R600_HDMI_AUDIO_DEBUG_0, 0x00FFFFFF);
 	WREG32(offset+R600_HDMI_AUDIO_DEBUG_1, 0x007FFFFF);
 	WREG32(offset+R600_HDMI_AUDIO_DEBUG_2, 0x00000001);
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index cfe3af1a793..ba643b57605 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -177,7 +177,7 @@ void radeon_pm_suspend(struct radeon_device *rdev);
 void radeon_pm_resume(struct radeon_device *rdev);
 void radeon_combios_get_power_modes(struct radeon_device *rdev);
 void radeon_atombios_get_power_modes(struct radeon_device *rdev);
-void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level);
+void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type);
 void rs690_pm_info(struct radeon_device *rdev);
 extern int rv6xx_get_temp(struct radeon_device *rdev);
 extern int rv770_get_temp(struct radeon_device *rdev);
@@ -679,11 +679,11 @@ struct radeon_wb {
  * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP)
  * @ht_bandwidth:       ht bandwidth the gpu has (MByte/s) (IGP)
  * @core_bandwidth:     core GPU bandwidth the gpu has (MByte/s) (IGP)
- * @sclk:          	GPU clock Mhz (core bandwith depends of this clock)
+ * @sclk:          	GPU clock Mhz (core bandwidth depends of this clock)
  * @needed_bandwidth:   current bandwidth needs
  *
  * It keeps track of various data needed to take powermanagement decision.
- * Bandwith need is used to determine minimun clock of the GPU and memory.
+ * Bandwidth need is used to determine minimun clock of the GPU and memory.
  * Equation between gpu/memory clock and available bandwidth is hw dependent
  * (type of memory, bus size, efficiency, ...)
  */
@@ -767,7 +767,9 @@ struct radeon_voltage {
 	u8 vddci_id; /* index into vddci voltage table */
 	bool vddci_enabled;
 	/* r6xx+ sw */
-	u32 voltage;
+	u16 voltage;
+	/* evergreen+ vddci */
+	u16 vddci;
 };
 
 /* clock mode flags */
@@ -835,10 +837,12 @@ struct radeon_pm {
 	int                     default_power_state_index;
 	u32                     current_sclk;
 	u32                     current_mclk;
-	u32                     current_vddc;
+	u16                     current_vddc;
+	u16                     current_vddci;
 	u32                     default_sclk;
 	u32                     default_mclk;
-	u32                     default_vddc;
+	u16                     default_vddc;
+	u16                     default_vddci;
 	struct radeon_i2c_chan *i2c_bus;
 	/* selected pm method */
 	enum radeon_pm_method     pm_method;
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index eb888ee5f67..ca576191d05 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -94,7 +94,7 @@ static void radeon_register_accessor_init(struct radeon_device *rdev)
 		rdev->mc_rreg = &rs600_mc_rreg;
 		rdev->mc_wreg = &rs600_mc_wreg;
 	}
-	if ((rdev->family >= CHIP_R600) && (rdev->family <= CHIP_HEMLOCK)) {
+	if (rdev->family >= CHIP_R600) {
 		rdev->pciep_rreg = &r600_pciep_rreg;
 		rdev->pciep_wreg = &r600_pciep_wreg;
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 02d5c415f49..90dfb2b8cf0 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -431,7 +431,7 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 		}
 	}
 
-	/* Acer laptop (Acer TravelMate 5730G) has an HDMI port
+	/* Acer laptop (Acer TravelMate 5730/5730G) has an HDMI port
 	 * on the laptop and a DVI port on the docking station and
 	 * both share the same encoder, hpd pin, and ddc line.
 	 * So while the bios table is technically correct,
@@ -440,7 +440,7 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 	 * with different crtcs which isn't possible on the hardware
 	 * side and leaves no crtcs for LVDS or VGA.
 	 */
-	if ((dev->pdev->device == 0x95c4) &&
+	if (((dev->pdev->device == 0x95c4) || (dev->pdev->device == 0x9591)) &&
 	    (dev->pdev->subsystem_vendor == 0x1025) &&
 	    (dev->pdev->subsystem_device == 0x013c)) {
 		if ((*connector_type == DRM_MODE_CONNECTOR_DVII) &&
@@ -675,7 +675,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 							ATOM_ENCODER_CAP_RECORD *cap_record;
 							u16 caps = 0;
 
-							while (record->ucRecordType > 0 &&
+							while (record->ucRecordSize > 0 &&
+							       record->ucRecordType > 0 &&
 							       record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
 								switch (record->ucRecordType) {
 								case ATOM_ENCODER_CAP_RECORD_TYPE:
@@ -720,7 +721,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 									break;
 							}
 
-							while (record->ucRecordType > 0 &&
+							while (record->ucRecordSize > 0 &&
+							       record->ucRecordType > 0 &&
 							       record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
 								switch (record->ucRecordType) {
 								case ATOM_I2C_RECORD_TYPE:
@@ -782,10 +784,9 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 						ATOM_HPD_INT_RECORD *hpd_record;
 						ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
 
-						while (record->ucRecordType > 0
-						       && record->
-						       ucRecordType <=
-						       ATOM_MAX_OBJECT_RECORD_NUMBER) {
+						while (record->ucRecordSize > 0 &&
+						       record->ucRecordType > 0 &&
+						       record->ucRecordType <= ATOM_MAX_OBJECT_RECORD_NUMBER) {
 							switch (record->ucRecordType) {
 							case ATOM_I2C_RECORD_TYPE:
 								i2c_record =
@@ -1573,9 +1574,17 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct
 			ATOM_FAKE_EDID_PATCH_RECORD *fake_edid_record;
 			ATOM_PANEL_RESOLUTION_PATCH_RECORD *panel_res_record;
 			bool bad_record = false;
-			u8 *record = (u8 *)(mode_info->atom_context->bios +
-					    data_offset +
-					    le16_to_cpu(lvds_info->info.usModePatchTableOffset));
+			u8 *record;
+
+			if ((frev == 1) && (crev < 2))
+				/* absolute */
+				record = (u8 *)(mode_info->atom_context->bios +
+						le16_to_cpu(lvds_info->info.usModePatchTableOffset));
+			else
+				/* relative */
+				record = (u8 *)(mode_info->atom_context->bios +
+						data_offset +
+						le16_to_cpu(lvds_info->info.usModePatchTableOffset));
 			while (*record != ATOM_RECORD_END_TYPE) {
 				switch (*record) {
 				case LCD_MODE_PATCH_RECORD_MODE_TYPE:
@@ -1598,9 +1607,10 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct
 							memcpy((u8 *)edid, (u8 *)&fake_edid_record->ucFakeEDIDString[0],
 							       fake_edid_record->ucFakeEDIDLength);
 
-							if (drm_edid_is_valid(edid))
+							if (drm_edid_is_valid(edid)) {
 								rdev->mode_info.bios_hardcoded_edid = edid;
-							else
+								rdev->mode_info.bios_hardcoded_edid_size = edid_size;
+							} else
 								kfree(edid);
 						}
 					}
@@ -2175,24 +2185,27 @@ static void radeon_atombios_add_pplib_thermal_controller(struct radeon_device *r
 	}
 }
 
-static u16 radeon_atombios_get_default_vddc(struct radeon_device *rdev)
+static void radeon_atombios_get_default_voltages(struct radeon_device *rdev,
+						 u16 *vddc, u16 *vddci)
 {
 	struct radeon_mode_info *mode_info = &rdev->mode_info;
 	int index = GetIndexIntoMasterTable(DATA, FirmwareInfo);
 	u8 frev, crev;
 	u16 data_offset;
 	union firmware_info *firmware_info;
-	u16 vddc = 0;
+
+	*vddc = 0;
+	*vddci = 0;
 
 	if (atom_parse_data_header(mode_info->atom_context, index, NULL,
 				   &frev, &crev, &data_offset)) {
 		firmware_info =
 			(union firmware_info *)(mode_info->atom_context->bios +
 						data_offset);
-		vddc = le16_to_cpu(firmware_info->info_14.usBootUpVDDCVoltage);
+		*vddc = le16_to_cpu(firmware_info->info_14.usBootUpVDDCVoltage);
+		if ((frev == 2) && (crev >= 2))
+			*vddci = le16_to_cpu(firmware_info->info_22.usBootUpVDDCIVoltage);
 	}
-
-	return vddc;
 }
 
 static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rdev,
@@ -2202,7 +2215,9 @@ static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rde
 	int j;
 	u32 misc = le32_to_cpu(non_clock_info->ulCapsAndSettings);
 	u32 misc2 = le16_to_cpu(non_clock_info->usClassification);
-	u16 vddc = radeon_atombios_get_default_vddc(rdev);
+	u16 vddc, vddci;
+
+	radeon_atombios_get_default_voltages(rdev, &vddc, &vddci);
 
 	rdev->pm.power_state[state_index].misc = misc;
 	rdev->pm.power_state[state_index].misc2 = misc2;
@@ -2243,6 +2258,7 @@ static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rde
 			rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk;
 			rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk;
 			rdev->pm.default_vddc = rdev->pm.power_state[state_index].clock_info[0].voltage.voltage;
+			rdev->pm.default_vddci = rdev->pm.power_state[state_index].clock_info[0].voltage.vddci;
 		} else {
 			/* patch the table values with the default slck/mclk from firmware info */
 			for (j = 0; j < mode_index; j++) {
@@ -2285,6 +2301,8 @@ static bool radeon_atombios_parse_pplib_clock_info(struct radeon_device *rdev,
 			VOLTAGE_SW;
 		rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage =
 			le16_to_cpu(clock_info->evergreen.usVDDC);
+		rdev->pm.power_state[state_index].clock_info[mode_index].voltage.vddci =
+			le16_to_cpu(clock_info->evergreen.usVDDCI);
 	} else {
 		sclk = le16_to_cpu(clock_info->r600.usEngineClockLow);
 		sclk |= clock_info->r600.ucEngineClockHigh << 16;
@@ -2576,25 +2594,25 @@ union set_voltage {
 	struct _SET_VOLTAGE_PARAMETERS_V2 v2;
 };
 
-void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level)
+void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type)
 {
 	union set_voltage args;
 	int index = GetIndexIntoMasterTable(COMMAND, SetVoltage);
-	u8 frev, crev, volt_index = level;
+	u8 frev, crev, volt_index = voltage_level;
 
 	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
 		return;
 
 	switch (crev) {
 	case 1:
-		args.v1.ucVoltageType = SET_VOLTAGE_TYPE_ASIC_VDDC;
+		args.v1.ucVoltageType = voltage_type;
 		args.v1.ucVoltageMode = SET_ASIC_VOLTAGE_MODE_ALL_SOURCE;
 		args.v1.ucVoltageIndex = volt_index;
 		break;
 	case 2:
-		args.v2.ucVoltageType = SET_VOLTAGE_TYPE_ASIC_VDDC;
+		args.v2.ucVoltageType = voltage_type;
 		args.v2.ucVoltageMode = SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE;
-		args.v2.usVoltageLevel = cpu_to_le16(level);
+		args.v2.usVoltageLevel = cpu_to_le16(voltage_level);
 		break;
 	default:
 		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index ed5dfe58f29..9d95792bea3 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -15,6 +15,9 @@
 #define ATPX_VERSION 0
 #define ATPX_GPU_PWR 2
 #define ATPX_MUX_SELECT 3
+#define ATPX_I2C_MUX_SELECT 4
+#define ATPX_SWITCH_START 5
+#define ATPX_SWITCH_END 6
 
 #define ATPX_INTEGRATED 0
 #define ATPX_DISCRETE 1
@@ -149,13 +152,35 @@ static int radeon_atpx_switch_mux(acpi_handle handle, int mux_id)
 	return radeon_atpx_execute(handle, ATPX_MUX_SELECT, mux_id);
 }
 
+static int radeon_atpx_switch_i2c_mux(acpi_handle handle, int mux_id)
+{
+	return radeon_atpx_execute(handle, ATPX_I2C_MUX_SELECT, mux_id);
+}
+
+static int radeon_atpx_switch_start(acpi_handle handle, int gpu_id)
+{
+	return radeon_atpx_execute(handle, ATPX_SWITCH_START, gpu_id);
+}
+
+static int radeon_atpx_switch_end(acpi_handle handle, int gpu_id)
+{
+	return radeon_atpx_execute(handle, ATPX_SWITCH_END, gpu_id);
+}
 
 static int radeon_atpx_switchto(enum vga_switcheroo_client_id id)
 {
+	int gpu_id;
+
 	if (id == VGA_SWITCHEROO_IGD)
-		radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, 0);
+		gpu_id = ATPX_INTEGRATED;
 	else
-		radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, 1);
+		gpu_id = ATPX_DISCRETE;
+
+	radeon_atpx_switch_start(radeon_atpx_priv.atpx_handle, gpu_id);
+	radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, gpu_id);
+	radeon_atpx_switch_i2c_mux(radeon_atpx_priv.atpx_handle, gpu_id);
+	radeon_atpx_switch_end(radeon_atpx_priv.atpx_handle, gpu_id);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index cf602e2d071..8caf546c8e9 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -2079,6 +2079,19 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
 					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
 					    CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I,
 					    &hpd);
+		/* TV - TV DAC */
+		ddc_i2c.valid = false;
+		hpd.hpd = RADEON_HPD_NONE;
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_SVIDEO,
+					    &hpd);
 		break;
 	default:
 		DRM_INFO("Connector table: %d (invalid)\n",
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 2ef6d513506..5f45fa12bb8 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1199,7 +1199,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 	if (router->ddc_valid || router->cd_valid) {
 		radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
 		if (!radeon_connector->router_bus)
-			goto failed;
+			DRM_ERROR("Failed to assign router i2c bus! Check dmesg for i2c errors.\n");
 	}
 	switch (connector_type) {
 	case DRM_MODE_CONNECTOR_VGA:
@@ -1208,7 +1208,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("VGA: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
@@ -1226,7 +1226,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("DVIA: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
@@ -1249,7 +1249,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("DVI: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		subpixel_order = SubPixelHorizontalRGB;
 		drm_connector_attach_property(&radeon_connector->base,
@@ -1290,7 +1290,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("HDMI: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.coherent_mode_property,
@@ -1329,10 +1329,10 @@ radeon_add_atom_connector(struct drm_device *dev,
 			else
 				radeon_dig_connector->dp_i2c_bus = radeon_i2c_create_dp(dev, i2c_bus, "DP-auxch");
 			if (!radeon_dig_connector->dp_i2c_bus)
-				goto failed;
+				DRM_ERROR("DP: Failed to assign dp ddc bus! Check dmesg for i2c errors.\n");
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("DP: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		subpixel_order = SubPixelHorizontalRGB;
 		drm_connector_attach_property(&radeon_connector->base,
@@ -1381,7 +1381,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("LVDS: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		drm_connector_attach_property(&radeon_connector->base,
 					      dev->mode_config.scaling_mode_property,
@@ -1457,7 +1457,7 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("VGA: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
@@ -1475,7 +1475,7 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("DVIA: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
@@ -1493,7 +1493,7 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("DVI: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		if (connector_type == DRM_MODE_CONNECTOR_DVII) {
 			radeon_connector->dac_load_detect = true;
@@ -1538,7 +1538,7 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_lookup(rdev, i2c_bus);
 			if (!radeon_connector->ddc_bus)
-				goto failed;
+				DRM_ERROR("LVDS: Failed to assign ddc bus! Check dmesg for i2c errors.\n");
 		}
 		drm_connector_attach_property(&radeon_connector->base,
 					      dev->mode_config.scaling_mode_property,
@@ -1567,9 +1567,4 @@ radeon_add_legacy_connector(struct drm_device *dev,
 				radeon_legacy_backlight_init(radeon_encoder, connector);
 		}
 	}
-	return;
-
-failed:
-	drm_connector_cleanup(connector);
-	kfree(connector);
 }
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 3d599e33b9c..75867792a4e 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -244,7 +244,7 @@ void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base)
 	u32 agp_base_lo = agp_base & 0xffffffff;
 	u32 r6xx_agp_base = (agp_base >> 22) & 0x3ffff;
 
-	/* R6xx/R7xx must be aligned to a 4MB boundry */
+	/* R6xx/R7xx must be aligned to a 4MB boundary */
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV770)
 		RADEON_WRITE(R700_MC_VM_AGP_BASE, r6xx_agp_base);
 	else if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600)
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index 017ac54920f..3189a7efb2e 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -167,9 +167,6 @@ int radeon_crtc_cursor_set(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
-	radeon_crtc->cursor_width = width;
-	radeon_crtc->cursor_height = height;
-
 	obj = drm_gem_object_lookup(crtc->dev, file_priv, handle);
 	if (!obj) {
 		DRM_ERROR("Cannot find cursor object %x for crtc %d\n", handle, radeon_crtc->crtc_id);
@@ -180,6 +177,9 @@ int radeon_crtc_cursor_set(struct drm_crtc *crtc,
 	if (ret)
 		goto fail;
 
+	radeon_crtc->cursor_width = width;
+	radeon_crtc->cursor_height = height;
+
 	radeon_lock_cursor(crtc, true);
 	/* XXX only 27 bit offset for legacy cursor */
 	radeon_set_cursor(crtc, obj, gpu_addr);
@@ -226,7 +226,7 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
 		y += crtc->y;
 		DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
 
-		/* avivo cursor image can't end on 128 pixel boundry or
+		/* avivo cursor image can't end on 128 pixel boundary or
 		 * go past the end of the frame if both crtcs are enabled
 		 */
 		list_for_each_entry(crtc_p, &crtc->dev->mode_config.crtc_list, head) {
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f0209be7a34..890217e678d 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -262,7 +262,7 @@ int radeon_wb_init(struct radeon_device *rdev)
  * Note: GTT start, end, size should be initialized before calling this
  * function on AGP platform.
  *
- * Note: We don't explictly enforce VRAM start to be aligned on VRAM size,
+ * Note: We don't explicitly enforce VRAM start to be aligned on VRAM size,
  * this shouldn't be a problem as we are using the PCI aperture as a reference.
  * Otherwise this would be needed for rv280, all r3xx, and all r4xx, but
  * not IGP.
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 4be58793dc1..bdbab5c43bd 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -1492,7 +1492,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
  *
  * \return Flags, or'ed together as follows:
  *
- * DRM_SCANOUTPOS_VALID = Query successfull.
+ * DRM_SCANOUTPOS_VALID = Query successful.
  * DRM_SCANOUTPOS_INVBL = Inside vblank.
  * DRM_SCANOUTPOS_ACCURATE = Returned position is accurate. A lack of
  * this flag means that returned position may be offset by a constant but
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 5cba46b9779..a1b59ca96d0 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -271,7 +271,7 @@ typedef struct drm_radeon_private {
 
 	int have_z_offset;
 
-	/* starting from here on, data is preserved accross an open */
+	/* starting from here on, data is preserved across an open */
 	uint32_t flags;		/* see radeon_chip_flags */
 	resource_size_t fb_aper_offset;
 
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 9e59868d354..bbcd1dd7bac 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -79,7 +79,7 @@ static bool radeon_fence_poll_locked(struct radeon_device *rdev)
 			scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
 		else
 			scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
-		seq = rdev->wb.wb[scratch_index/4];
+		seq = le32_to_cpu(rdev->wb.wb[scratch_index/4]);
 	} else
 		seq = RREG32(rdev->fence_drv.scratch_reg);
 	if (seq != rdev->fence_drv.last_seq) {
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index f0534ef2f33..a533f52fd16 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -181,9 +181,9 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset,
 	p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE);
 
 	for (i = 0; i < pages; i++, p++) {
-		/* On TTM path, we only use the DMA API if TTM_PAGE_FLAG_DMA32
-		 * is requested. */
-		if (dma_addr[i] != DMA_ERROR_CODE) {
+		/* we reverted the patch using dma_addr in TTM for now but this
+		 * code stops building on alpha so just comment it out for now */
+		if (0) { /*dma_addr[i] != DMA_ERROR_CODE) */
 			rdev->gart.ttm_alloced[p] = true;
 			rdev->gart.pages_addr[p] = dma_addr[i];
 		} else {
@@ -285,4 +285,6 @@ void radeon_gart_fini(struct radeon_device *rdev)
 	rdev->gart.pages = NULL;
 	rdev->gart.pages_addr = NULL;
 	rdev->gart.ttm_alloced = NULL;
+
+	radeon_dummy_page_fini(rdev);
 }
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index ded2a45bc95..983cbac75af 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -1062,7 +1062,7 @@ void radeon_i2c_get_byte(struct radeon_i2c_chan *i2c_bus,
 		*val = in_buf[0];
 		DRM_DEBUG("val = 0x%02x\n", *val);
 	} else {
-		DRM_ERROR("i2c 0x%02x 0x%02x read failed\n",
+		DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n",
 			  addr, *val);
 	}
 }
@@ -1084,7 +1084,7 @@ void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c_bus,
 	out_buf[1] = val;
 
 	if (i2c_transfer(&i2c_bus->adapter, &msg, 1) != 1)
-		DRM_ERROR("i2c 0x%02x 0x%02x write failed\n",
+		DRM_DEBUG("i2c 0x%02x 0x%02x write failed\n",
 			  addr, val);
 }
 
@@ -1096,6 +1096,9 @@ void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector)
 	if (!radeon_connector->router.ddc_valid)
 		return;
 
+	if (!radeon_connector->router_bus)
+		return;
+
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, &val);
@@ -1121,6 +1124,9 @@ void radeon_router_select_cd_port(struct radeon_connector *radeon_connector)
 	if (!radeon_connector->router.cd_valid)
 		return;
 
+	if (!radeon_connector->router_bus)
+		return;
+
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, &val);
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index bf7d4c06145..bd58af65858 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -221,6 +221,22 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 			return -EINVAL;
 		}
 		break;
+	case RADEON_INFO_NUM_TILE_PIPES:
+		if (rdev->family >= CHIP_CAYMAN)
+			value = rdev->config.cayman.max_tile_pipes;
+		else if (rdev->family >= CHIP_CEDAR)
+			value = rdev->config.evergreen.max_tile_pipes;
+		else if (rdev->family >= CHIP_RV770)
+			value = rdev->config.rv770.max_tile_pipes;
+		else if (rdev->family >= CHIP_R600)
+			value = rdev->config.r600.max_tile_pipes;
+		else {
+			return -EINVAL;
+		}
+		break;
+	case RADEON_INFO_FUSION_GART_WORKING:
+		value = 1;
+		break;
 	default:
 		DRM_DEBUG_KMS("Invalid request %d\n", info->request);
 		return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 5b54268ed6b..2f46e0c8df5 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -269,7 +269,7 @@ static const struct drm_encoder_helper_funcs radeon_legacy_lvds_helper_funcs = {
 	.disable = radeon_legacy_encoder_disable,
 };
 
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
 
 #define MAX_RADEON_LEVEL 0xFF
 
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index 7f8e778dba4..ede6c13628f 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -87,7 +87,7 @@ static inline void radeon_bo_unreserve(struct radeon_bo *bo)
  * Returns current GPU offset of the object.
  *
  * Note: object should either be pinned or reserved when calling this
- * function, it might be usefull to add check for this for debugging.
+ * function, it might be useful to add check for this for debugging.
  */
 static inline u64 radeon_bo_gpu_offset(struct radeon_bo *bo)
 {
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 08de669e025..86eda1ea94d 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -23,6 +23,7 @@
 #include "drmP.h"
 #include "radeon.h"
 #include "avivod.h"
+#include "atom.h"
 #ifdef CONFIG_ACPI
 #include <linux/acpi.h>
 #endif
@@ -535,7 +536,11 @@ void radeon_pm_resume(struct radeon_device *rdev)
 	/* set up the default clocks if the MC ucode is loaded */
 	if (ASIC_IS_DCE5(rdev) && rdev->mc_fw) {
 		if (rdev->pm.default_vddc)
-			radeon_atom_set_voltage(rdev, rdev->pm.default_vddc);
+			radeon_atom_set_voltage(rdev, rdev->pm.default_vddc,
+						SET_VOLTAGE_TYPE_ASIC_VDDC);
+		if (rdev->pm.default_vddci)
+			radeon_atom_set_voltage(rdev, rdev->pm.default_vddci,
+						SET_VOLTAGE_TYPE_ASIC_VDDCI);
 		if (rdev->pm.default_sclk)
 			radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
 		if (rdev->pm.default_mclk)
@@ -548,6 +553,7 @@ void radeon_pm_resume(struct radeon_device *rdev)
 	rdev->pm.current_sclk = rdev->pm.default_sclk;
 	rdev->pm.current_mclk = rdev->pm.default_mclk;
 	rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
+	rdev->pm.current_vddci = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.vddci;
 	if (rdev->pm.pm_method == PM_METHOD_DYNPM
 	    && rdev->pm.dynpm_state == DYNPM_STATE_SUSPENDED) {
 		rdev->pm.dynpm_state = DYNPM_STATE_ACTIVE;
@@ -585,7 +591,8 @@ int radeon_pm_init(struct radeon_device *rdev)
 		/* set up the default clocks if the MC ucode is loaded */
 		if (ASIC_IS_DCE5(rdev) && rdev->mc_fw) {
 			if (rdev->pm.default_vddc)
-				radeon_atom_set_voltage(rdev, rdev->pm.default_vddc);
+				radeon_atom_set_voltage(rdev, rdev->pm.default_vddc,
+							SET_VOLTAGE_TYPE_ASIC_VDDC);
 			if (rdev->pm.default_sclk)
 				radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
 			if (rdev->pm.default_mclk)
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index bbc9cd82333..c6776e48fdd 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -248,7 +248,7 @@ void radeon_ib_pool_fini(struct radeon_device *rdev)
 void radeon_ring_free_size(struct radeon_device *rdev)
 {
 	if (rdev->wb.enabled)
-		rdev->cp.rptr = rdev->wb.wb[RADEON_WB_CP_RPTR_OFFSET/4];
+		rdev->cp.rptr = le32_to_cpu(rdev->wb.wb[RADEON_WB_CP_RPTR_OFFSET/4]);
 	else {
 		if (rdev->family >= CHIP_R600)
 			rdev->cp.rptr = RREG32(R600_CP_RB_RPTR);
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 4ae5a3d1074..92e7ea73b7c 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -980,7 +980,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev,
 	}
 
 	/* hyper z clear */
-	/* no docs available, based on reverse engeneering by Stephane Marchesin */
+	/* no docs available, based on reverse engineering by Stephane Marchesin */
 	if ((flags & (RADEON_DEPTH | RADEON_STENCIL))
 	    && (flags & RADEON_CLEAR_FASTZ)) {
 
diff --git a/drivers/gpu/drm/radeon/reg_srcs/cayman b/drivers/gpu/drm/radeon/reg_srcs/cayman
index 6334f8ac120..0aa8e85a945 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/cayman
+++ b/drivers/gpu/drm/radeon/reg_srcs/cayman
@@ -33,6 +33,7 @@ cayman 0x9400
 0x00008E48 SQ_EX_ALLOC_TABLE_SLOTS
 0x00009100 SPI_CONFIG_CNTL
 0x0000913C SPI_CONFIG_CNTL_1
+0x00009508 TA_CNTL_AUX
 0x00009830 DB_DEBUG
 0x00009834 DB_DEBUG2
 0x00009838 DB_DEBUG3
diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen
index 7e1637176e0..0e28cae7ea4 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/evergreen
+++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen
@@ -46,6 +46,7 @@ evergreen 0x9400
 0x00008E48 SQ_EX_ALLOC_TABLE_SLOTS
 0x00009100 SPI_CONFIG_CNTL
 0x0000913C SPI_CONFIG_CNTL_1
+0x00009508 TA_CNTL_AUX
 0x00009700 VC_CNTL
 0x00009714 VC_ENHANCE
 0x00009830 DB_DEBUG
diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600
index af0da4ae3f5..92f1900dc7c 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/r600
+++ b/drivers/gpu/drm/radeon/reg_srcs/r600
@@ -708,6 +708,7 @@ r600 0x9400
 0x00028D0C DB_RENDER_CONTROL
 0x00028D10 DB_RENDER_OVERRIDE
 0x0002880C DB_SHADER_CONTROL
+0x00028D28 DB_SRESULTS_COMPARE_STATE0
 0x00028D2C DB_SRESULTS_COMPARE_STATE1
 0x00028430 DB_STENCILREFMASK
 0x00028434 DB_STENCILREFMASK_BF
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 19763f5df5e..6e3b11e5abb 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -48,17 +48,6 @@ int rs600_mc_wait_for_idle(struct radeon_device *rdev);
 
 void rs600_pre_page_flip(struct radeon_device *rdev, int crtc)
 {
-	struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc];
-	u32 tmp;
-
-	/* make sure flip is at vb rather than hb */
-	tmp = RREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset);
-	tmp &= ~AVIVO_D1GRPH_SURFACE_UPDATE_H_RETRACE_EN;
-	WREG32(AVIVO_D1GRPH_FLIP_CONTROL + radeon_crtc->crtc_offset, tmp);
-
-	/* set pageflip to happen anywhere in vblank interval */
-	WREG32(AVIVO_D1MODE_MASTER_UPDATE_MODE + radeon_crtc->crtc_offset, 0);
-
 	/* enable the pflip int */
 	radeon_irq_kms_pflip_irq_get(rdev, crtc);
 }
@@ -125,7 +114,7 @@ void rs600_pm_misc(struct radeon_device *rdev)
 				udelay(voltage->delay);
 		}
 	} else if (voltage->type == VOLTAGE_VDDC)
-		radeon_atom_set_voltage(rdev, voltage->vddc_id);
+		radeon_atom_set_voltage(rdev, voltage->vddc_id, SET_VOLTAGE_TYPE_ASIC_VDDC);
 
 	dyn_pwrmgt_sclk_length = RREG32_PLL(DYN_PWRMGT_SCLK_LENGTH);
 	dyn_pwrmgt_sclk_length &= ~REDUCED_POWER_SCLK_HILEN(0xf);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b974ac7df8d..ef8a5babe9f 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -106,7 +106,7 @@ void rv770_pm_misc(struct radeon_device *rdev)
 
 	if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
 		if (voltage->voltage != rdev->pm.current_vddc) {
-			radeon_atom_set_voltage(rdev, voltage->voltage);
+			radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
 			rdev->pm.current_vddc = voltage->voltage;
 			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
 		}
@@ -1255,9 +1255,6 @@ int rv770_init(struct radeon_device *rdev)
 {
 	int r;
 
-	r = radeon_dummy_page_init(rdev);
-	if (r)
-		return r;
 	/* This don't do much */
 	r = radeon_gem_init(rdev);
 	if (r)
@@ -1372,7 +1369,6 @@ void rv770_fini(struct radeon_device *rdev)
 	radeon_atombios_fini(rdev);
 	kfree(rdev->bios);
 	rdev->bios = NULL;
-	radeon_dummy_page_fini(rdev);
 }
 
 static void rv770_pcie_gen2_enable(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 0b6a55ac2f8..2e618b5ac46 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1168,7 +1168,7 @@ int ttm_bo_init(struct ttm_bo_device *bdev,
 		uint32_t page_alignment,
 		unsigned long buffer_start,
 		bool interruptible,
-		struct file *persistant_swap_storage,
+		struct file *persistent_swap_storage,
 		size_t acc_size,
 		void (*destroy) (struct ttm_buffer_object *))
 {
@@ -1211,7 +1211,7 @@ int ttm_bo_init(struct ttm_bo_device *bdev,
 	bo->priv_flags = 0;
 	bo->mem.placement = (TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED);
 	bo->seq_valid = false;
-	bo->persistant_swap_storage = persistant_swap_storage;
+	bo->persistent_swap_storage = persistent_swap_storage;
 	bo->acc_size = acc_size;
 	atomic_inc(&bo->glob->bo_count);
 
@@ -1260,7 +1260,7 @@ int ttm_bo_create(struct ttm_bo_device *bdev,
 			uint32_t page_alignment,
 			unsigned long buffer_start,
 			bool interruptible,
-			struct file *persistant_swap_storage,
+			struct file *persistent_swap_storage,
 			struct ttm_buffer_object **p_bo)
 {
 	struct ttm_buffer_object *bo;
@@ -1282,7 +1282,7 @@ int ttm_bo_create(struct ttm_bo_device *bdev,
 
 	ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment,
 				buffer_start, interruptible,
-				persistant_swap_storage, acc_size, NULL);
+				persistent_swap_storage, acc_size, NULL);
 	if (likely(ret == 0))
 		*p_bo = bo;
 
@@ -1863,7 +1863,7 @@ static int ttm_bo_swapout(struct ttm_mem_shrink *shrink)
 	if (bo->bdev->driver->swap_notify)
 		bo->bdev->driver->swap_notify(bo);
 
-	ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage);
+	ret = ttm_tt_swapout(bo->ttm, bo->persistent_swap_storage);
 out:
 
 	/**
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index 737a2a2e46a..9d9d92945f8 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -683,22 +683,14 @@ int ttm_get_pages(struct list_head *pages, int flags,
 			gfp_flags |= GFP_HIGHUSER;
 
 		for (r = 0; r < count; ++r) {
-			if ((flags & TTM_PAGE_FLAG_DMA32) && dma_address) {
-				void *addr;
-				addr = dma_alloc_coherent(NULL, PAGE_SIZE,
-							  &dma_address[r],
-							  gfp_flags);
-				if (addr == NULL)
-					return -ENOMEM;
-				p = virt_to_page(addr);
-			} else
-				p = alloc_page(gfp_flags);
+			p = alloc_page(gfp_flags);
 			if (!p) {
 
 				printk(KERN_ERR TTM_PFX
 				       "Unable to allocate page.");
 				return -ENOMEM;
 			}
+
 			list_add(&p->lru, pages);
 		}
 		return 0;
@@ -746,24 +738,12 @@ void ttm_put_pages(struct list_head *pages, unsigned page_count, int flags,
 	unsigned long irq_flags;
 	struct ttm_page_pool *pool = ttm_get_pool(flags, cstate);
 	struct page *p, *tmp;
-	unsigned r;
 
 	if (pool == NULL) {
 		/* No pool for this memory type so free the pages */
 
-		r = page_count-1;
 		list_for_each_entry_safe(p, tmp, pages, lru) {
-			if ((flags & TTM_PAGE_FLAG_DMA32) && dma_address) {
-				void *addr = page_address(p);
-				WARN_ON(!addr || !dma_address[r]);
-				if (addr)
-					dma_free_coherent(NULL, PAGE_SIZE,
-							  addr,
-							  dma_address[r]);
-				dma_address[r] = 0;
-			} else
-				__free_page(p);
-			r--;
+			__free_page(p);
 		}
 		/* Make the pages list empty */
 		INIT_LIST_HEAD(pages);
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 86d5b1745a4..90e23e0bfad 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -332,7 +332,7 @@ void ttm_tt_destroy(struct ttm_tt *ttm)
 		ttm_tt_free_page_directory(ttm);
 	}
 
-	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP) &&
+	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTENT_SWAP) &&
 	    ttm->swap_storage)
 		fput(ttm->swap_storage);
 
@@ -503,7 +503,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm)
 		page_cache_release(from_page);
 	}
 
-	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP))
+	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTENT_SWAP))
 		fput(swap_storage);
 	ttm->swap_storage = NULL;
 	ttm->page_flags &= ~TTM_PAGE_FLAG_SWAPPED;
@@ -514,7 +514,7 @@ out_err:
 	return ret;
 }
 
-int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
+int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage)
 {
 	struct address_space *swap_space;
 	struct file *swap_storage;
@@ -540,7 +540,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
 		return 0;
 	}
 
-	if (!persistant_swap_storage) {
+	if (!persistent_swap_storage) {
 		swap_storage = shmem_file_setup("ttm swap",
 						ttm->num_pages << PAGE_SHIFT,
 						0);
@@ -549,7 +549,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
 			return PTR_ERR(swap_storage);
 		}
 	} else
-		swap_storage = persistant_swap_storage;
+		swap_storage = persistent_swap_storage;
 
 	swap_space = swap_storage->f_path.dentry->d_inode->i_mapping;
 
@@ -577,12 +577,12 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
 	ttm_tt_free_alloced_pages(ttm);
 	ttm->swap_storage = swap_storage;
 	ttm->page_flags |= TTM_PAGE_FLAG_SWAPPED;
-	if (persistant_swap_storage)
-		ttm->page_flags |= TTM_PAGE_FLAG_PERSISTANT_SWAP;
+	if (persistent_swap_storage)
+		ttm->page_flags |= TTM_PAGE_FLAG_PERSISTENT_SWAP;
 
 	return 0;
 out_err:
-	if (!persistant_swap_storage)
+	if (!persistent_swap_storage)
 		fput(swap_storage);
 
 	return ret;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index cceeb42789b..dfe32e62bd9 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -245,7 +245,7 @@ void vmw_kms_cursor_snoop(struct vmw_surface *srf,
 		/* TODO handle none page aligned offsets */
 		/* TODO handle partial uploads and pitch != 256 */
 		/* TODO handle more then one copy (size != 64) */
-		DRM_ERROR("lazy programer, cant handle wierd stuff\n");
+		DRM_ERROR("lazy programmer, can't handle weird stuff\n");
 		return;
 	}
 
diff --git a/drivers/gpu/stub/Kconfig b/drivers/gpu/stub/Kconfig
index 70e60a4bb67..419917955bf 100644
--- a/drivers/gpu/stub/Kconfig
+++ b/drivers/gpu/stub/Kconfig
@@ -5,6 +5,7 @@ config STUB_POULSBO
 	# Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
 	select BACKLIGHT_CLASS_DEVICE if ACPI
+	select VIDEO_OUTPUT_CONTROL if ACPI
 	select INPUT if ACPI
 	select ACPI_VIDEO if ACPI
 	select THERMAL if ACPI
diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
index e01cacba685..498b284e5ef 100644
--- a/drivers/gpu/vga/vga_switcheroo.c
+++ b/drivers/gpu/vga/vga_switcheroo.c
@@ -219,9 +219,6 @@ static int vga_switchto_stage1(struct vga_switcheroo_client *new_client)
 	int i;
 	struct vga_switcheroo_client *active = NULL;
 
-	if (new_client->active == true)
-		return 0;
-
 	for (i = 0; i < VGA_SWITCHEROO_MAX_CLIENTS; i++) {
 		if (vgasr_priv.clients[i].active == true) {
 			active = &vgasr_priv.clients[i];
@@ -372,6 +369,9 @@ vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf,
 		goto out;
 	}
 
+	if (client->active == true)
+		goto out;
+
 	/* okay we want a switch - test if devices are willing to switch */
 	can_switch = true;
 	for (i = 0; i < VGA_SWITCHEROO_MAX_CLIENTS; i++) {
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index ace2b1623b2..be8d4cb5861 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -151,7 +151,7 @@ static inline void vga_irq_set_state(struct vga_device *vgadev, bool state)
 static void vga_check_first_use(void)
 {
 	/* we should inform all GPUs in the system that
-	 * VGA arb has occured and to try and disable resources
+	 * VGA arb has occurred and to try and disable resources
 	 * if they can */
 	if (!vga_arbiter_used) {
 		vga_arbiter_used = true;
@@ -774,7 +774,7 @@ static ssize_t vga_arb_read(struct file *file, char __user * buf,
 	 */
 	spin_lock_irqsave(&vga_lock, flags);
 
-	/* If we are targetting the default, use it */
+	/* If we are targeting the default, use it */
 	pdev = priv->target;
 	if (pdev == NULL || pdev == PCI_INVALID_CARD) {
 		spin_unlock_irqrestore(&vga_lock, flags);
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index b7ec4057841..9de9e97149e 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -185,7 +185,7 @@ config HID_EZKEY
 	Support for Ezkey BTC 8193 keyboard.
 
 config HID_KEYTOUCH
-	tristate "Keyoutch HID devices"
+	tristate "Keytouch HID devices"
 	depends on USB_HID
 	---help---
 	Support for Keytouch HID devices not fully compliant with
@@ -340,10 +340,17 @@ config HID_NTRIG
 	Support for N-Trig touch screen.
 
 config HID_ORTEK
-	tristate "Ortek PKB-1700/WKB-2000 wireless keyboard and mouse trackpad"
+	tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
 	depends on USB_HID
 	---help---
-	Support for Ortek PKB-1700/WKB-2000 wireless keyboard + mouse trackpad.
+	There are certain devices which have LogicalMaximum wrong in the keyboard
+	usage page of their report descriptor. The most prevailing ones so far
+	are manufactured by Ortek, thus the name of the driver. Currently
+	supported devices by this driver are
+
+	   - Ortek PKB-1700
+	   - Ortek WKB-2000
+	   - Skycable wireless presenter
 
 config HID_PANTHERLORD
 	tristate "Pantherlord/GreenAsia game controller"
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index e9687768a33..408c4bea4d8 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -306,7 +306,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
 	case HID_GLOBAL_ITEM_TAG_PUSH:
 
 		if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) {
-			dbg_hid("global enviroment stack overflow\n");
+			dbg_hid("global environment stack overflow\n");
 			return -1;
 		}
 
@@ -317,7 +317,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
 	case HID_GLOBAL_ITEM_TAG_POP:
 
 		if (!parser->global_stack_ptr) {
-			dbg_hid("global enviroment stack underflow\n");
+			dbg_hid("global environment stack underflow\n");
 			return -1;
 		}
 
@@ -1449,8 +1449,10 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPLUS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 555382fc741..bae48745bb4 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -341,7 +341,7 @@ static const struct hid_usage_entry hid_usage_table[] = {
     { 0x85, 0x83, "DesignCapacity" },
     { 0x85, 0x85, "ManufacturerDate" },
     { 0x85, 0x89, "iDeviceChemistry" },
-    { 0x85, 0x8b, "Rechargable" },
+    { 0x85, 0x8b, "Rechargeable" },
     { 0x85, 0x8f, "iOEMInformation" },
     { 0x85, 0x8d, "CapacityGranularity1" },
     { 0x85, 0xd0, "ACPresent" },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 65ac53d7aec..00a94b535d2 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -150,6 +150,7 @@
 #define USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6 0x0f01
 
 #define USB_VENDOR_ID_CH		0x068e
+#define USB_DEVICE_ID_CH_PRO_THROTTLE	0x00f1
 #define USB_DEVICE_ID_CH_PRO_PEDALS	0x00f2
 #define USB_DEVICE_ID_CH_COMBATSTICK	0x00f4
 #define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE       0x0051
@@ -524,6 +525,9 @@
 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE	0x0001
 #define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE	0x0600
 
+#define USB_VENDOR_ID_SKYCABLE			0x1223
+#define	USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER	0x3F07
+
 #define USB_VENDOR_ID_SONY			0x054c
 #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE	0x024b
 #define USB_DEVICE_ID_SONY_PS3_CONTROLLER	0x0268
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index 90d0ef2c92b..f099079ca6b 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -73,6 +73,8 @@ static const struct dev_type devices[] = {
 	{ 0x046d, 0xc293, ff_joystick },
 	{ 0x046d, 0xc294, ff_wheel },
 	{ 0x046d, 0xc295, ff_joystick },
+	{ 0x046d, 0xc298, ff_wheel },
+	{ 0x046d, 0xc299, ff_wheel },
 	{ 0x046d, 0xca03, ff_wheel },
 };
 
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index 318cc40df92..0ec91c18a42 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -76,7 +76,7 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie
  * This is true when single_touch_id is equal to NO_TOUCHES. If multiple touches
  * are down and the touch providing for single touch emulation is lifted,
  * single_touch_id is equal to SINGLE_TOUCH_UP. While single touch emulation is
- * occuring, single_touch_id corresponds with the tracking id of the touch used.
+ * occurring, single_touch_id corresponds with the tracking id of the touch used.
  */
 #define NO_TOUCHES -1
 #define SINGLE_TOUCH_UP -2
@@ -418,6 +418,8 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
 			input_set_abs_params(input, ABS_MT_POSITION_Y, -2456,
 				2565, 4, 0);
 		}
+
+		input_set_events_per_packet(input, 60);
 	}
 
 	if (report_undeciphered) {
diff --git a/drivers/hid/hid-ortek.c b/drivers/hid/hid-ortek.c
index f9b7dd4f607..0ffa1d2d64f 100644
--- a/drivers/hid/hid-ortek.c
+++ b/drivers/hid/hid-ortek.c
@@ -1,8 +1,14 @@
 /*
- *  HID driver for Ortek PKB-1700/WKB-2000 (wireless keyboard + mouse trackpad).
- *  Fixes LogicalMaximum error in HID report description.
+ *  HID driver for various devices which are apparently based on the same chipset
+ *  from certain vendor which produces chips that contain wrong LogicalMaximum
+ *  value in their HID report descriptor. Currently supported devices are:
+ *
+ *    Ortek PKB-1700
+ *    Ortek WKB-2000
+ *    Skycable wireless presenter
  *
  *  Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
+ *  Copyright (c) 2011 Jiri Kosina
  */
 
 /*
@@ -22,8 +28,11 @@ static __u8 *ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
 	if (*rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) {
-		hid_info(hdev, "Fixing up Ortek WKB-2000 report descriptor\n");
+		hid_info(hdev, "Fixing up logical minimum in report descriptor (Ortek)\n");
 		rdesc[55] = 0x92;
+	} else if (*rsize >= 54 && rdesc[52] == 0x25 && rdesc[53] == 0x01) {
+		hid_info(hdev, "Fixing up logical minimum in report descriptor (Skycable)\n");
+		rdesc[53] = 0x65;
 	}
 	return rdesc;
 }
@@ -31,6 +40,7 @@ static __u8 *ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 static const struct hid_device_id ortek_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ortek_devices);
diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c
index 657da5a3d5c..b2f56a13bcf 100644
--- a/drivers/hid/hid-picolcd.c
+++ b/drivers/hid/hid-picolcd.c
@@ -1806,13 +1806,13 @@ static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u,
 /*
  * Notes:
  * - concurrent writing is prevented by mutex and all writes must be
- *   n*64 bytes and 64-byte aligned, each write being preceeded by an
+ *   n*64 bytes and 64-byte aligned, each write being preceded by an
  *   ERASE which erases a 64byte block.
  *   If less than requested was written or an error is returned for an
  *   otherwise correct write request the next 64-byte block which should
  *   have been written is in undefined state (mostly: original, erased,
  *   (half-)written with write error)
- * - reading can happend without special restriction
+ * - reading can happen without special restriction
  */
 static const struct file_operations picolcd_debug_flash_fops = {
 	.owner    = THIS_MODULE,
diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h
index 64abb5b8a59..4109a028e13 100644
--- a/drivers/hid/hid-roccat-kone.h
+++ b/drivers/hid/hid-roccat-kone.h
@@ -166,7 +166,7 @@ enum kone_mouse_events {
 	/* osd events are thought to be display on screen */
 	kone_mouse_event_osd_dpi = 0xa0,
 	kone_mouse_event_osd_profile = 0xb0,
-	/* TODO clarify meaning and occurence of kone_mouse_event_calibration */
+	/* TODO clarify meaning and occurrence of kone_mouse_event_calibration */
 	kone_mouse_event_calibration = 0xc0,
 	kone_mouse_event_call_overlong_macro = 0xe0,
 	/* switch events notify if user changed values with mousebutton click */
diff --git a/drivers/hid/hid-roccat-pyra.c b/drivers/hid/hid-roccat-pyra.c
index 160f481344f..38280c055a1 100644
--- a/drivers/hid/hid-roccat-pyra.c
+++ b/drivers/hid/hid-roccat-pyra.c
@@ -652,7 +652,8 @@ static int pyra_raw_event(struct hid_device *hdev, struct hid_report *report,
 static const struct hid_device_id pyra_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT,
 			USB_DEVICE_ID_ROCCAT_PYRA_WIRED) },
-	/* TODO add USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS after testing */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT,
+			USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) },
 	{ }
 };
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 9a94b643ccd..a8426f15e9a 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -59,6 +59,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_THROTTLE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 060ef632787..50e40dbd8bb 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -110,8 +110,7 @@ config SENSORS_ADM1021
 	help
 	  If you say yes here you get support for Analog Devices ADM1021
 	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
-	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
-	  and the XEON processor built-in sensor.
+	  Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called adm1021.
@@ -618,10 +617,10 @@ config SENSORS_LM90
 	depends on I2C
 	help
 	  If you say yes here you get support for National Semiconductor LM90,
-	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
-	  MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
-	  MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
-	  W83L771W/G/AWG/ASG sensor chips.
+	  LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
+	  Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+	  MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
+	  and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 0e05aa179ea..e7d4c4687f0 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -1422,7 +1422,7 @@ static int __init abituguru_detect(void)
 	   at DATA and 0xAC, when this driver has already been loaded once
 	   DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either
 	   scenario but some will hold 0x00.
-	   Some uGuru's initally hold 0x09 at DATA and will only hold 0x08
+	   Some uGuru's initially hold 0x09 at DATA and will only hold 0x08
 	   after reading CMD first, so CMD must be read first! */
 	u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD);
 	u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA);
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 034cebfcd27..e89d572e332 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -151,7 +151,7 @@ struct abituguru3_data {
 	/* Pointer to the sensors info for the detected motherboard */
 	const struct abituguru3_sensor_info *sensors;
 
-	/* The abituguru3 supports upto 48 sensors, and thus has registers
+	/* The abituguru3 supports up to 48 sensors, and thus has registers
 	   sets for 48 sensors, for convienence reasons / simplicity of the
 	   code we always read and store all registers for all 48 sensors */
 
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index be0fdd58aa2..0531867484f 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -175,7 +175,7 @@ static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f };
  * these macros are called: arguments may be evaluated more than once.
  */
 
-/* IN are scaled acording to built-in resistors.  These are the
+/* IN are scaled according to built-in resistors.  These are the
  *   voltages corresponding to 3/4 of full scale (192 or 0xc0)
  *   NOTE: The -12V input needs an additional factor to account
  *      for the Vref pullup resistor.
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index cf47e6e476e..da72dc12068 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -130,7 +130,7 @@ enum chips {
    these macros are called: arguments may be evaluated more than once.
  */
 
-/* IN are scaled acording to built-in resistors */
+/* IN are scaled according to built-in resistors */
 static const int lm85_scaling[] = {  /* .001 Volts */
 	2500, 2250, 3300, 5000, 12000,
 	3300, 1500, 1800 /*EMC6D100*/
@@ -1094,6 +1094,7 @@ static struct attribute *lm85_attributes_minctl[] = {
 	&sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
+	NULL
 };
 
 static const struct attribute_group lm85_group_minctl = {
@@ -1104,6 +1105,7 @@ static struct attribute *lm85_attributes_temp_off[] = {
 	&sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
 	&sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
 	&sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
+	NULL
 };
 
 static const struct attribute_group lm85_group_temp_off = {
@@ -1329,11 +1331,11 @@ static int lm85_probe(struct i2c_client *client,
 	if (data->type != emc6d103s) {
 		err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl);
 		if (err)
-			goto err_kfree;
+			goto err_remove_files;
 		err = sysfs_create_group(&client->dev.kobj,
 					 &lm85_group_temp_off);
 		if (err)
-			goto err_kfree;
+			goto err_remove_files;
 	}
 
 	/* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 812781c655a..2f94f950480 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -49,10 +49,10 @@
  * chips, but support three temperature sensors instead of two. MAX6695
  * and MAX6696 only differ in the pinout so they can be treated identically.
  *
- * This driver also supports the ADT7461 chip from Analog Devices.
- * It's supported in both compatibility and extended mode. It is mostly
- * compatible with LM90 except for a data format difference for the
- * temperature value registers.
+ * This driver also supports ADT7461 and ADT7461A from Analog Devices as well as
+ * NCT1008 from ON Semiconductor. The chips are supported in both compatibility
+ * and extended mode. They are mostly compatible with LM90 except for a data
+ * format difference for the temperature value registers.
  *
  * Since the LM90 was the first chipset supported by this driver, most
  * comments will refer to this chipset, but are actually general and
@@ -88,9 +88,10 @@
  * Addresses to scan
  * Address is fully defined internally and cannot be changed except for
  * MAX6659, MAX6680 and MAX6681.
- * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657,
- * MAX6658 and W83L771 have address 0x4c.
- * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d.
+ * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, ADT7461A, MAX6649,
+ * MAX6657, MAX6658, NCT1008 and W83L771 have address 0x4c.
+ * ADM1032-2, ADT7461-2, ADT7461A-2, LM89-1, LM99-1, MAX6646, and NCT1008D
+ * have address 0x4d.
  * MAX6647 has address 0x4e.
  * MAX6659 can have address 0x4c, 0x4d or 0x4e.
  * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
@@ -174,6 +175,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 static const struct i2c_device_id lm90_id[] = {
 	{ "adm1032", adm1032 },
 	{ "adt7461", adt7461 },
+	{ "adt7461a", adt7461 },
 	{ "lm90", lm90 },
 	{ "lm86", lm86 },
 	{ "lm89", lm86 },
@@ -188,6 +190,7 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "max6681", max6680 },
 	{ "max6695", max6696 },
 	{ "max6696", max6696 },
+	{ "nct1008", adt7461 },
 	{ "w83l771", w83l771 },
 	{ }
 };
@@ -356,7 +359,7 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
 	/*
 	 * There is a trick here. We have to read two registers to have the
 	 * sensor temperature, but we have to beware a conversion could occur
-	 * inbetween the readings. The datasheet says we should either use
+	 * between the readings. The datasheet says we should either use
 	 * the one-shot conversion register, which we don't want to do
 	 * (disables hardware monitoring) or monitor the busy bit, which is
 	 * impossible (we can't read the values and monitor that bit at the
@@ -1153,6 +1156,11 @@ static int lm90_detect(struct i2c_client *new_client,
 		 && (reg_config1 & 0x1B) == 0x00
 		 && reg_convrate <= 0x0A) {
 			name = "adt7461";
+		} else
+		if (chip_id == 0x57 /* ADT7461A, NCT1008 */
+		 && (reg_config1 & 0x1B) == 0x00
+		 && reg_convrate <= 0x0A) {
+			name = "adt7461a";
 		}
 	} else
 	if (man_id == 0x4D) { /* Maxim */
diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c
index edfb92e4173..196ffafafd8 100644
--- a/drivers/hwmon/pmbus_core.c
+++ b/drivers/hwmon/pmbus_core.c
@@ -139,7 +139,6 @@ struct pmbus_data {
 	 * A single status register covers multiple attributes,
 	 * so we keep them all together.
 	 */
-	u8 status_bits;
 	u8 status[PB_NUM_STATUS_REG];
 
 	u8 currpage;
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 1a9c32d6893..f4e617adb22 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -52,7 +52,7 @@
 #define SHT15_TSU		150	/* data setup time */
 
 /**
- * struct sht15_temppair - elements of voltage dependant temp calc
+ * struct sht15_temppair - elements of voltage dependent temp calc
  * @vdd:	supply voltage in microvolts
  * @d1:		see data sheet
  */
@@ -251,7 +251,7 @@ static inline int sht15_update_single_val(struct sht15_data *data,
 	enable_irq(gpio_to_irq(data->pdata->gpio_data));
 	if (gpio_get_value(data->pdata->gpio_data) == 0) {
 		disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
-		/* Only relevant if the interrupt hasn't occured. */
+		/* Only relevant if the interrupt hasn't occurred. */
 		if (!atomic_read(&data->interrupt_handled))
 			schedule_work(&data->read_work);
 	}
@@ -452,7 +452,7 @@ static void sht15_bh_read_data(struct work_struct *work_s)
 		*/
 		atomic_set(&data->interrupt_handled, 0);
 		enable_irq(gpio_to_irq(data->pdata->gpio_data));
-		/* If still not occured or another handler has been scheduled */
+		/* If still not occurred or another handler has been scheduled */
 		if (gpio_get_value(data->pdata->gpio_data)
 		    || atomic_read(&data->interrupt_handled))
 			return;
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 93187c3cb5e..5bd19496880 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -166,7 +166,7 @@ static int __devinit tmp102_probe(struct i2c_client *client,
 
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_WORD_DATA)) {
-		dev_err(&client->dev, "adapter doesnt support SMBus word "
+		dev_err(&client->dev, "adapter doesn't support SMBus word "
 			"transactions\n");
 		return -ENODEV;
 	}
diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index 97e22bef85a..57240740b16 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -98,7 +98,6 @@ static const struct attribute_group twl4030_madc_group = {
 static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev)
 {
 	int ret;
-	int status;
 	struct device *hwmon;
 
 	ret = sysfs_create_group(&pdev->dev.kobj, &twl4030_madc_group);
@@ -107,7 +106,7 @@ static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev)
 	hwmon = hwmon_device_register(&pdev->dev);
 	if (IS_ERR(hwmon)) {
 		dev_err(&pdev->dev, "hwmon_device_register failed.\n");
-		status = PTR_ERR(hwmon);
+		ret = PTR_ERR(hwmon);
 		goto err_reg;
 	}
 
@@ -154,4 +153,4 @@ module_exit(twl4030_madc_hwmon_exit);
 MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("J Keerthy");
-MODULE_ALIAS("twl4030_madc_hwmon");
+MODULE_ALIAS("platform:twl4030_madc_hwmon");
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 400a88bde27..17cf1ab9552 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -556,7 +556,7 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
 
 /* Note: we save and restore the fan minimum here, because its value is
    determined in part by the fan divisor.  This follows the principle of
-   least suprise; the user doesn't expect the fan minimum to change just
+   least surprise; the user doesn't expect the fan minimum to change just
    because the divisor changed. */
 static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
 				const char *buf, size_t count)
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 63841f8cec0..f3e7130c4cd 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -244,7 +244,7 @@ FAN_TO_REG(long rpm, int div)
 #define TEMP1_TO_REG(val)	(SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
 					: (val)) / 1000, 0, 0xff))
 #define TEMP1_FROM_REG(val)	(((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
-/* for temp2 and temp3, because they need addtional resolution */
+/* for temp2 and temp3, because they need additional resolution */
 #define TEMP_ADD_FROM_REG(val1, val2) \
 	((((val1) & 0x80 ? (val1)-0x100 \
 		: (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0))
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index e3bdedfb534..854f9117f1a 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1921,7 +1921,7 @@ static void w83793_update_nonvolatile(struct device *dev)
 	struct w83793_data *data = i2c_get_clientdata(client);
 	int i, j;
 	/*
-	   They are somewhat "stable" registers, and to update them everytime
+	   They are somewhat "stable" registers, and to update them every time
 	   takes so much time, it's just not worthy. Update them in a long
 	   interval to avoid exception.
 	 */
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 38319a69bd0..d6d58684712 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -232,9 +232,17 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
  * Sanity check for the adapter hardware - check the reaction of
  * the bus lines only if it seems to be idle.
  */
-static int test_bus(struct i2c_algo_bit_data *adap, char *name)
+static int test_bus(struct i2c_adapter *i2c_adap)
 {
-	int scl, sda;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	const char *name = i2c_adap->name;
+	int scl, sda, ret;
+
+	if (adap->pre_xfer) {
+		ret = adap->pre_xfer(i2c_adap);
+		if (ret < 0)
+			return -ENODEV;
+	}
 
 	if (adap->getscl == NULL)
 		pr_info("%s: Testing SDA only, SCL is not readable\n", name);
@@ -297,11 +305,19 @@ static int test_bus(struct i2c_algo_bit_data *adap, char *name)
 		       "while pulling SCL high!\n", name);
 		goto bailout;
 	}
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
+
 	pr_info("%s: Test OK\n", name);
 	return 0;
 bailout:
 	sdahi(adap);
 	sclhi(adap);
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
+
 	return -ENODEV;
 }
 
@@ -607,7 +623,7 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap,
 	int ret;
 
 	if (bit_test) {
-		ret = test_bus(bit_adap, adap->name);
+		ret = test_bus(adap);
 		if (ret < 0)
 			return -ENODEV;
 	}
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 2b9a8f54bb2..4ca9cf9cde7 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -343,7 +343,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
 	ret = curmsg;
  out:
-	DEB1("}}} transfered %d/%d messages. "
+	DEB1("}}} transferred %d/%d messages. "
 	     "status is %#04x. control is %#04x\n",
 	     curmsg, num, pca_status(adap),
 	     pca_get_con(adap));
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 906a3ca50db..dd364171f9c 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -295,7 +295,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	}
 
 	/* Unfortunately the ALI SMB controller maps "no response" and "bus
-	 * collision" into a single bit. No reponse is the usual case so don't
+	 * collision" into a single bit. No response is the usual case so don't
 	 * do a printk.  This means that bus collisions go unreported.
 	 */
 	if (temp & ALI1535_STS_BUSERR) {
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index b14f6d68221..83e8a60cdc8 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -318,7 +318,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 
 	/*
 	  Unfortunately the ALI SMB controller maps "no response" and "bus
-	  collision" into a single bit. No reponse is the usual case so don't
+	  collision" into a single bit. No response is the usual case so don't
 	  do a printk.
 	  This means that bus collisions go unreported.
 	*/
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 5795c8398c7..a76d85fa3ad 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -355,7 +355,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	/*
 	 * Write mode register first as needed for correct behaviour
 	 * on OMAP-L138, but don't set STT yet to avoid a race with XRDY
-	 * occuring before we have loaded DXR
+	 * occurring before we have loaded DXR
 	 */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
 
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b664ed8bbdb..b7a51c43b18 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -178,7 +178,7 @@ static char *abort_sources[] = {
  * @lock: protect this struct and IO registers
  * @clk: input reference clock
  * @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transfered
+ * @msgs: points to an array of messages currently being transferred
  * @msgs_num: the number of elements in msgs
  * @msg_write_idx: the element index of the current tx message in the msgs
  *	array
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index e5b1a3bf5b8..37e2e82a9c8 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -22,7 +22,7 @@
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
    Frodo Looijaard <frodol@dds.nl> */
 
-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
+/* Partially rewriten by Oleg I. Vdovikin for mmapped support of
    for Alpha Processor Inc. UP-2000(+) boards */
 
 #include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ed2e0c5ea37..455e909bc76 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -96,7 +96,7 @@
 #define SMBHSTCFG_SMB_SMI_EN	2
 #define SMBHSTCFG_I2C_EN	4
 
-/* Auxillary control register bits, ICH4+ only */
+/* Auxiliary control register bits, ICH4+ only */
 #define SMBAUXCTL_CRC		1
 #define SMBAUXCTL_E32B		2
 
@@ -134,10 +134,15 @@
 				 SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
 				 SMBHSTSTS_INTR)
 
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0	0x1d70
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1	0x1d71
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2	0x1d72
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 
 struct i801_priv {
 	struct i2c_adapter adapter;
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index e4f88dca99b..3c110fbc409 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -494,7 +494,7 @@ static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
 		if (unlikely(ret < 0))
 			break;
 		else if (unlikely(ret != count)){
-			DBG("%d: xfer_bytes, requested %d, transfered %d\n",
+			DBG("%d: xfer_bytes, requested %d, transferred %d\n",
 				dev->idx, count, ret);
 
 			/* If it's not a last part of xfer, abort it */
@@ -593,7 +593,7 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
 		DBG("%d: iic_xfer, bus is not free\n", dev->idx);
 
-		/* Usually it means something serious has happend.
+		/* Usually it means something serious has happened.
 		 * We *cannot* have unfinished previous transfer
 		 * so it doesn't make any sense to try to stop it.
 		 * Probably we were not able to recover from the
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
index c71492782bb..e828ac85cfa 100644
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ b/drivers/i2c/busses/i2c-intel-mid.c
@@ -170,8 +170,8 @@ struct intel_mid_i2c_private {
 /* Raw Interrupt Status Register */
 #define IC_RAW_INTR_STAT	0x34		/* Read Only */
 #define GEN_CALL		(1 << 11)	/* General call */
-#define START_DET		(1 << 10)	/* (RE)START occured */
-#define STOP_DET		(1 << 9)	/* STOP occured */
+#define START_DET		(1 << 10)	/* (RE)START occurred */
+#define STOP_DET		(1 << 9)	/* STOP occurred */
 #define ACTIVITY		(1 << 8)	/* Bus busy */
 #define RX_DONE			(1 << 7)	/* Not used in Master mode */
 #define	TX_ABRT			(1 << 6)	/* Transmit Abort */
@@ -375,7 +375,7 @@ static int intel_mid_i2c_disable(struct i2c_adapter *adap)
  * I2C should be disabled prior to other register operation. If failed, an
  * errno is returned. Mask and Clear all interrpts, this should be done at
  * first.  Set common registers which will not be modified during normal
- * transfers, including: controll register, FIFO threshold and clock freq.
+ * transfers, including: control register, FIFO threshold and clock freq.
  * Check APB data width at last.
  */
 static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c)
@@ -455,7 +455,7 @@ static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
  *
  * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
  * distingushed. At present, no circumstances have been found out that
- * multiple errors would be occured simutaneously, so we simply use the
+ * multiple errors would be occurred simutaneously, so we simply use the
  * register value directly.
  *
  * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
@@ -469,7 +469,7 @@ static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)
 
 	/* Single transfer error check:
 	 * According to databook, TX/RX FIFOs would be flushed when
-	 * the abort interrupt occured.
+	 * the abort interrupt occurred.
 	 */
 	if (abort & ABRT_MASTER_DIS)
 		dev_err(&adap->dev,
@@ -569,7 +569,7 @@ static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
  * Return Values:
  * 0	if the read transfer succeeds
  * -ETIMEDOUT	if we cannot read the "raw" interrupt register
- * -EINVAL	if a transfer abort occured
+ * -EINVAL	if a transfer abort occurred
  *
  * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
  * data transfer. The actual "write" operation will be performed when the
@@ -697,7 +697,7 @@ static int intel_mid_i2c_setup(struct i2c_adapter *adap,  struct i2c_msg *pmsg)
  * @num: number of i2c_msg
  *
  * Return Values:
- * +		number of messages transfered
+ * +		number of messages transferred
  * -ETIMEDOUT	If cannot disable I2C controller or read IC_STATUS
  * -EINVAL	If the address in i2c_msg is invalid
  *
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index ddc258edb34..0682f8f277b 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -141,7 +141,7 @@ static int sch_transaction(void)
  * This is the main access entry for i2c-sch access
  * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write
  * (0 for read and 1 for write), size is i2c transaction type and data is the
- * union of transaction for data to be transfered or data read from bus.
+ * union of transaction for data to be transferred or data read from bus.
  * return 0 for success and others for failure.
  */
 static s32 sch_access(struct i2c_adapter *adap, u16 addr,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 75b984c519a..107397a606b 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -560,15 +560,18 @@ static struct i2c_adapter mpc_ops = {
 	.timeout = HZ,
 };
 
+static const struct of_device_id mpc_i2c_of_match[];
 static int __devinit fsl_i2c_probe(struct platform_device *op)
 {
+	const struct of_device_id *match;
 	struct mpc_i2c *i2c;
 	const u32 *prop;
 	u32 clock = MPC_I2C_CLOCK_LEGACY;
 	int result = 0;
 	int plen;
 
-	if (!op->dev.of_match)
+	match = of_match_device(mpc_i2c_of_match, &op->dev);
+	if (!match)
 		return -EINVAL;
 
 	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
@@ -605,8 +608,8 @@ static int __devinit fsl_i2c_probe(struct platform_device *op)
 			clock = *prop;
 	}
 
-	if (op->dev.of_match->data) {
-		struct mpc_i2c_data *data = op->dev.of_match->data;
+	if (match->data) {
+		struct mpc_i2c_data *data = match->data;
 		data->setup(op->dev.of_node, i2c, clock, data->prescaler);
 	} else {
 		/* Backwards compatibility */
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index caf96dc8ca1..7e78f7c8785 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -149,7 +149,7 @@ static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
 	 * We have to copy the slave address (u8) and buffer (arbitrary number
 	 * of u8) into the data register (u32). To achieve that, the u8 are put
 	 * into the MSBs of 'data' which is then shifted for the next u8. When
-	 * apropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
+	 * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
 	 * looks like this:
 	 *
 	 *  3          2          1          0
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 594ed5059c4..e10e5cf3751 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -126,9 +126,9 @@ enum i2c_operation {
 /**
  * struct i2c_nmk_client - client specific data
  * @slave_adr: 7-bit slave address
- * @count: no. bytes to be transfered
+ * @count: no. bytes to be transferred
  * @buffer: client data buffer
- * @xfer_bytes: bytes transfered till now
+ * @xfer_bytes: bytes transferred till now
  * @operation: current I2C operation
  */
 struct i2c_nmk_client {
@@ -330,7 +330,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * slsu defines the data setup time after SCL clock
 	 * stretching in terms of i2c clk cycles. The
 	 * needed setup time for the three modes are 250ns,
-	 * 100ns, 10ns repectively thus leading to the values
+	 * 100ns, 10ns respectively thus leading to the values
 	 * of 14, 6, 2 for a 48 MHz i2c clk.
 	 */
 	writel(dev->cfg.slsu << 16, dev->virtbase + I2C_SCR);
@@ -364,7 +364,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	/*
 	 * set the speed mode. Currently we support
 	 * only standard and fast mode of operation
-	 * TODO - support for fast mode plus (upto 1Mb/s)
+	 * TODO - support for fast mode plus (up to 1Mb/s)
 	 * and high speed (up to 3.4 Mb/s)
 	 */
 	if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 0eb1515541e..2dbba163b10 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -1,7 +1,7 @@
 /* ------------------------------------------------------------------------ *
  * i2c-parport.c I2C bus over parallel port                                 *
  * ------------------------------------------------------------------------ *
-   Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
+   Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org>
    
    Based on older i2c-philips-par.c driver
    Copyright (C) 1995-2000 Simon G. Vogl
@@ -33,6 +33,8 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-smbus.h>
 #include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
 #include "i2c-parport.h"
 
 /* ----- Device list ------------------------------------------------------ */
@@ -43,10 +45,11 @@ struct i2c_par {
 	struct i2c_algo_bit_data algo_data;
 	struct i2c_smbus_alert_setup alert_data;
 	struct i2c_client *ara;
-	struct i2c_par *next;
+	struct list_head node;
 };
 
-static struct i2c_par *adapter_list;
+static LIST_HEAD(adapter_list);
+static DEFINE_MUTEX(adapter_list_lock);
 
 /* ----- Low-level parallel port access ----------------------------------- */
 
@@ -228,8 +231,9 @@ static void i2c_parport_attach (struct parport *port)
 	}
 
 	/* Add the new adapter to the list */
-	adapter->next = adapter_list;
-	adapter_list = adapter;
+	mutex_lock(&adapter_list_lock);
+	list_add_tail(&adapter->node, &adapter_list);
+	mutex_unlock(&adapter_list_lock);
         return;
 
 ERROR1:
@@ -241,11 +245,11 @@ ERROR0:
 
 static void i2c_parport_detach (struct parport *port)
 {
-	struct i2c_par *adapter, *prev;
+	struct i2c_par *adapter, *_n;
 
 	/* Walk the list */
-	for (prev = NULL, adapter = adapter_list; adapter;
-	     prev = adapter, adapter = adapter->next) {
+	mutex_lock(&adapter_list_lock);
+	list_for_each_entry_safe(adapter, _n, &adapter_list, node) {
 		if (adapter->pdev->port == port) {
 			if (adapter->ara) {
 				parport_disable_irq(port);
@@ -259,14 +263,11 @@ static void i2c_parport_detach (struct parport *port)
 				
 			parport_release(adapter->pdev);
 			parport_unregister_device(adapter->pdev);
-			if (prev)
-				prev->next = adapter->next;
-			else
-				adapter_list = adapter->next;
+			list_del(&adapter->node);
 			kfree(adapter);
-			return;
 		}
 	}
+	mutex_unlock(&adapter_list_lock);
 }
 
 static struct parport_driver i2c_parport_driver = {
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index a97e3fec814..04be9f82e14 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -65,7 +65,7 @@ static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
 		jiffies, expires);
 
 	timer->expires = jiffies + expires;
-	timer->data = (unsigned long)&alg_data;
+	timer->data = (unsigned long)alg_data;
 
 	add_timer(timer);
 }
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index cadc0216e02..cb5d01e279c 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -318,7 +318,7 @@ static int __devinit s6i2c_probe(struct platform_device *dev)
 	rc = request_irq(iface->irq, s6i2c_interrupt_entry,
 			 IRQF_SHARED, dev->name, iface);
 	if (rc) {
-		dev_err(&p_adap->dev, "s6i2c: cant get IRQ %d\n", iface->irq);
+		dev_err(&p_adap->dev, "s6i2c: can't get IRQ %d\n", iface->irq);
 		goto err_clk_dis;
 	}
 
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 266135ddf7f..99879617e68 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 	u32 val;
 	int i = 0;
 
-	/* Locate the apropriate clock setting */
+	/* Locate the appropriate clock setting */
 	while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
 	       stu300_clktable[i].rate < clkrate)
 		i++;
@@ -644,7 +644,7 @@ static int stu300_send_address(struct stu300_dev *dev,
 	ret = stu300_await_event(dev, STU300_EVENT_6);
 
 	/*
-	 * Clear any pending EVENT 6 no matter what happend during
+	 * Clear any pending EVENT 6 no matter what happened during
 	 * await_event.
 	 */
 	val = stu300_r8(dev->virtbase + I2C_CR);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3921f664c9c..b4ab39b741e 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -386,7 +386,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
 	return IRQ_HANDLED;
 err:
-	/* An error occured, mask all interrupts */
+	/* An error occurred, mask all interrupts */
 	tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST |
 		I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ |
 		I2C_INT_RX_FIFO_DATA_REQ);
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 9fbd7e6fe32..e9d5ff4d149 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -21,7 +21,7 @@
  * to the automotive development board Russellville. The copyright holder
  * as seen in the header is Intel corporation.
  * Mocean Laboratories forked off the GNU/Linux platform work into a
- * separate company called Pelagicore AB, which commited the code to the
+ * separate company called Pelagicore AB, which committed the code to the
  * kernel.
  */
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e5f76a0372f..9a58994ff7e 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -348,7 +348,7 @@ EXPORT_SYMBOL(i2c_verify_client);
 
 
 /* This is a permissive address validity check, I2C address map constraints
- * are purposedly not enforced, except for the general call address. */
+ * are purposely not enforced, except for the general call address. */
 static int i2c_check_client_addr_validity(const struct i2c_client *client)
 {
 	if (client->flags & I2C_CLIENT_TEN) {
@@ -797,7 +797,8 @@ static int i2c_do_add_adapter(struct i2c_driver *driver,
 
 	/* Let legacy drivers scan this bus for matching devices */
 	if (driver->attach_adapter) {
-		dev_warn(&adap->dev, "attach_adapter method is deprecated\n");
+		dev_warn(&adap->dev, "%s: attach_adapter method is deprecated\n",
+			 driver->driver.name);
 		dev_warn(&adap->dev, "Please use another way to instantiate "
 			 "your i2c_client\n");
 		/* We ignore the return code; if it fails, too bad */
@@ -984,7 +985,8 @@ static int i2c_do_del_adapter(struct i2c_driver *driver,
 
 	if (!driver->detach_adapter)
 		return 0;
-	dev_warn(&adapter->dev, "detach_adapter method is deprecated\n");
+	dev_warn(&adapter->dev, "%s: detach_adapter method is deprecated\n",
+		 driver->driver.name);
 	res = driver->detach_adapter(adapter);
 	if (res)
 		dev_err(&adapter->dev, "detach_adapter failed (%d) "
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index 9383f67deae..3be60da5212 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -67,7 +67,7 @@ static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 	/*
 	 * note: below we set the value for Bus Master IDE TimeOut Register
-	 * I'm not absolutly sure what this does, but it solved my problem
+	 * I'm not absolutely sure what this does, but it solved my problem
 	 * with IDE DMA and sound, so I now can play sound and work with
 	 * my IDE driver at the same time :-)
 	 *
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index fd1e1179913..a5ec5a7cb38 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1782,7 +1782,6 @@ static int ide_cd_probe(ide_drive_t *drive)
 	ide_cd_read_toc(drive, &sense);
 	g->fops = &idecd_ops;
 	g->flags |= GENHD_FL_REMOVABLE;
-	g->events = DISK_EVENT_MEDIA_CHANGE;
 	add_disk(g);
 	return 0;
 
diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c
index 2a6bc50e8a4..02caa7dd51c 100644
--- a/drivers/ide/ide-cd_ioctl.c
+++ b/drivers/ide/ide-cd_ioctl.c
@@ -79,6 +79,12 @@ int ide_cdrom_drive_status(struct cdrom_device_info *cdi, int slot_nr)
 	return CDS_DRIVE_NOT_READY;
 }
 
+/*
+ * ide-cd always generates media changed event if media is missing, which
+ * makes it impossible to use for proper event reporting, so disk->events
+ * is cleared to 0 and the following function is used only to trigger
+ * revalidation and never propagated to userland.
+ */
 unsigned int ide_cdrom_check_events_real(struct cdrom_device_info *cdi,
 					 unsigned int clearing, int slot_nr)
 {
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 5406b6ea3ad..5a702d02c84 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -107,7 +107,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc)
 static void ide_floppy_report_error(struct ide_disk_obj *floppy,
 				    struct ide_atapi_pc *pc)
 {
-	/* supress error messages resulting from Medium not present */
+	/* suppress error messages resulting from Medium not present */
 	if (floppy->sense_key == 0x02 &&
 	    floppy->asc       == 0x3a &&
 	    floppy->ascq      == 0x00)
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index c4ffd488893..70ea8763567 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -298,6 +298,12 @@ static unsigned int ide_gd_check_events(struct gendisk *disk,
 		return 0;
 	}
 
+	/*
+	 * The following is used to force revalidation on the first open on
+	 * removeable devices, and never gets reported to userland as
+	 * genhd->events is 0.  This is intended as removeable ide disk
+	 * can't really detect MEDIA_CHANGE events.
+	 */
 	ret = drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED;
 	drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED;
 
@@ -413,7 +419,6 @@ static int ide_gd_probe(ide_drive_t *drive)
 	if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
 		g->flags = GENHD_FL_REMOVABLE;
 	g->fops = &ide_gd_ops;
-	g->events = DISK_EVENT_MEDIA_CHANGE;
 	add_disk(g);
 	return 0;
 
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 0e406d73b2c..177db6d5b2f 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -430,6 +430,26 @@ static inline void ide_unlock_host(struct ide_host *host)
 	}
 }
 
+static void __ide_requeue_and_plug(struct request_queue *q, struct request *rq)
+{
+	if (rq)
+		blk_requeue_request(q, rq);
+	if (rq || blk_peek_request(q)) {
+		/* Use 3ms as that was the old plug delay */
+		blk_delay_queue(q, 3);
+	}
+}
+
+void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
+{
+	struct request_queue *q = drive->queue;
+	unsigned long flags;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	__ide_requeue_and_plug(q, rq);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
 /*
  * Issue a new request to a device.
  */
@@ -550,28 +570,7 @@ plug_device:
 	ide_unlock_host(host);
 plug_device_2:
 	spin_lock_irq(q->queue_lock);
-
-	if (rq) {
-		blk_requeue_request(q, rq);
-		blk_delay_queue(q, queue_run_ms);
-	}
-}
-
-void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
-{
-	struct request_queue *q = drive->queue;
-	unsigned long flags;
-
-	spin_lock_irqsave(q->queue_lock, flags);
-
-	if (rq)
-		blk_requeue_request(q, rq);
-
-	spin_unlock_irqrestore(q->queue_lock, flags);
-
-	/* Use 3ms as that was the old plug delay */
-	if (rq)
-		blk_delay_queue(q, 3);
+	__ide_requeue_and_plug(q, rq);
 }
 
 static int drive_is_ready(ide_drive_t *drive)
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 34b9872f35d..600c89a3d13 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -201,7 +201,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
 	u8 stat;
 
 	/*
-	 * Last sector was transfered, wait until device is ready.  This can
+	 * Last sector was transferred, wait until device is ready.  This can
 	 * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
 	 */
 	for (retries = 0; retries < 1000; retries++) {
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 1bdca49e5a0..b59d04c7205 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -8,8 +8,8 @@
  *
  * Documentation:
  *
- *	Publically available from Intel web site. Errata documentation
- * is also publically available. As an aide to anyone hacking on this
+ *	Publicly available from Intel web site. Errata documentation
+ * is also publicly available. As an aide to anyone hacking on this
  * driver the list of errata that are relevant is below.going back to
  * PIIX4. Older device documentation is now a bit tricky to find.
  *
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index db7f4e761db..4a002256775 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -53,7 +53,7 @@
 
 #define DRV_NAME "sis5513"
 
-/* registers layout and init values are chipset family dependant */
+/* registers layout and init values are chipset family dependent */
 
 #define ATA_16		0x01
 #define ATA_33		0x02
@@ -406,7 +406,7 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 					pci_name(dev));
 				chipset_family = ATA_133;
 
-				/* Check for 5513 compability mapping
+				/* Check for 5513 compatibility mapping
 				 * We must use this, else the port enabled code will fail,
 				 * as it expects the enablebits at 0x4a.
 				 */
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 7953447eae0..e53a1b78378 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -22,7 +22,7 @@
  * Loosely based on the piix & svwks drivers.
  *
  * Documentation:
- *	Not publically available.
+ *	Not publicly available.
  */
 
 #include <linux/types.h>
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index d2a0997b78f..f46f49cfcc2 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -14,7 +14,7 @@
  *	Andre Hedrick
  *
  * Documentation:
- *	Obsolete device documentation publically available from via.com.tw
+ *	Obsolete device documentation publicly available from via.com.tw
  *	Current device documentation available under NDA only
  */
 
diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
index d9d0e13efe4..a5a49a1baae 100644
--- a/drivers/ieee802154/fakehard.c
+++ b/drivers/ieee802154/fakehard.c
@@ -393,16 +393,6 @@ static int __devinit ieee802154fake_probe(struct platform_device *pdev)
 	priv = netdev_priv(dev);
 	priv->phy = phy;
 
-	/*
-	 * If the name is a format string the caller wants us to do a
-	 * name allocation.
-	 */
-	if (strchr(dev->name, '%')) {
-		err = dev_alloc_name(dev, dev->name);
-		if (err < 0)
-			goto out;
-	}
-
 	wpan_phy_set_dev(phy, &pdev->dev);
 	SET_NETDEV_DEV(dev, &phy->dev);
 
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index 4ffc224faa7..8e21d457b89 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -185,15 +185,20 @@ static int addr4_resolve(struct sockaddr_in *src_in,
 	__be32 dst_ip = dst_in->sin_addr.s_addr;
 	struct rtable *rt;
 	struct neighbour *neigh;
+	struct flowi4 fl4;
 	int ret;
 
-	rt = ip_route_output(&init_net, dst_ip, src_ip, 0, addr->bound_dev_if);
+	memset(&fl4, 0, sizeof(fl4));
+	fl4.daddr = dst_ip;
+	fl4.saddr = src_ip;
+	fl4.flowi4_oif = addr->bound_dev_if;
+	rt = ip_route_output_key(&init_net, &fl4);
 	if (IS_ERR(rt)) {
 		ret = PTR_ERR(rt);
 		goto out;
 	}
 	src_in->sin_family = AF_INET;
-	src_in->sin_addr.s_addr = rt->rt_src;
+	src_in->sin_addr.s_addr = fl4.saddr;
 
 	if (rt->dst.dev->flags & IFF_LOOPBACK) {
 		ret = rdma_translate_ip((struct sockaddr *) dst_in, addr);
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 5ed9d25d021..99dde874fbb 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -148,6 +148,7 @@ struct rdma_id_private {
 	u32			qp_num;
 	u8			srq;
 	u8			tos;
+	u8			reuseaddr;
 };
 
 struct cma_multicast {
@@ -712,6 +713,21 @@ static inline int cma_any_addr(struct sockaddr *addr)
 	return cma_zero_addr(addr) || cma_loopback_addr(addr);
 }
 
+static int cma_addr_cmp(struct sockaddr *src, struct sockaddr *dst)
+{
+	if (src->sa_family != dst->sa_family)
+		return -1;
+
+	switch (src->sa_family) {
+	case AF_INET:
+		return ((struct sockaddr_in *) src)->sin_addr.s_addr !=
+		       ((struct sockaddr_in *) dst)->sin_addr.s_addr;
+	default:
+		return ipv6_addr_cmp(&((struct sockaddr_in6 *) src)->sin6_addr,
+				     &((struct sockaddr_in6 *) dst)->sin6_addr);
+	}
+}
+
 static inline __be16 cma_port(struct sockaddr *addr)
 {
 	if (addr->sa_family == AF_INET)
@@ -1564,50 +1580,6 @@ static void cma_listen_on_all(struct rdma_id_private *id_priv)
 	mutex_unlock(&lock);
 }
 
-int rdma_listen(struct rdma_cm_id *id, int backlog)
-{
-	struct rdma_id_private *id_priv;
-	int ret;
-
-	id_priv = container_of(id, struct rdma_id_private, id);
-	if (id_priv->state == CMA_IDLE) {
-		((struct sockaddr *) &id->route.addr.src_addr)->sa_family = AF_INET;
-		ret = rdma_bind_addr(id, (struct sockaddr *) &id->route.addr.src_addr);
-		if (ret)
-			return ret;
-	}
-
-	if (!cma_comp_exch(id_priv, CMA_ADDR_BOUND, CMA_LISTEN))
-		return -EINVAL;
-
-	id_priv->backlog = backlog;
-	if (id->device) {
-		switch (rdma_node_get_transport(id->device->node_type)) {
-		case RDMA_TRANSPORT_IB:
-			ret = cma_ib_listen(id_priv);
-			if (ret)
-				goto err;
-			break;
-		case RDMA_TRANSPORT_IWARP:
-			ret = cma_iw_listen(id_priv, backlog);
-			if (ret)
-				goto err;
-			break;
-		default:
-			ret = -ENOSYS;
-			goto err;
-		}
-	} else
-		cma_listen_on_all(id_priv);
-
-	return 0;
-err:
-	id_priv->backlog = 0;
-	cma_comp_exch(id_priv, CMA_LISTEN, CMA_ADDR_BOUND);
-	return ret;
-}
-EXPORT_SYMBOL(rdma_listen);
-
 void rdma_set_service_type(struct rdma_cm_id *id, int tos)
 {
 	struct rdma_id_private *id_priv;
@@ -2090,6 +2062,25 @@ err:
 }
 EXPORT_SYMBOL(rdma_resolve_addr);
 
+int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse)
+{
+	struct rdma_id_private *id_priv;
+	unsigned long flags;
+	int ret;
+
+	id_priv = container_of(id, struct rdma_id_private, id);
+	spin_lock_irqsave(&id_priv->lock, flags);
+	if (id_priv->state == CMA_IDLE) {
+		id_priv->reuseaddr = reuse;
+		ret = 0;
+	} else {
+		ret = -EINVAL;
+	}
+	spin_unlock_irqrestore(&id_priv->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(rdma_set_reuseaddr);
+
 static void cma_bind_port(struct rdma_bind_list *bind_list,
 			  struct rdma_id_private *id_priv)
 {
@@ -2165,41 +2156,71 @@ retry:
 	return -EADDRNOTAVAIL;
 }
 
-static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv)
+/*
+ * Check that the requested port is available.  This is called when trying to
+ * bind to a specific port, or when trying to listen on a bound port.  In
+ * the latter case, the provided id_priv may already be on the bind_list, but
+ * we still need to check that it's okay to start listening.
+ */
+static int cma_check_port(struct rdma_bind_list *bind_list,
+			  struct rdma_id_private *id_priv, uint8_t reuseaddr)
 {
 	struct rdma_id_private *cur_id;
-	struct sockaddr_in *sin, *cur_sin;
-	struct rdma_bind_list *bind_list;
+	struct sockaddr *addr, *cur_addr;
 	struct hlist_node *node;
+
+	addr = (struct sockaddr *) &id_priv->id.route.addr.src_addr;
+	if (cma_any_addr(addr) && !reuseaddr)
+		return -EADDRNOTAVAIL;
+
+	hlist_for_each_entry(cur_id, node, &bind_list->owners, node) {
+		if (id_priv == cur_id)
+			continue;
+
+		if ((cur_id->state == CMA_LISTEN) ||
+		    !reuseaddr || !cur_id->reuseaddr) {
+			cur_addr = (struct sockaddr *) &cur_id->id.route.addr.src_addr;
+			if (cma_any_addr(cur_addr))
+				return -EADDRNOTAVAIL;
+
+			if (!cma_addr_cmp(addr, cur_addr))
+				return -EADDRINUSE;
+		}
+	}
+	return 0;
+}
+
+static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv)
+{
+	struct rdma_bind_list *bind_list;
 	unsigned short snum;
+	int ret;
 
-	sin = (struct sockaddr_in *) &id_priv->id.route.addr.src_addr;
-	snum = ntohs(sin->sin_port);
+	snum = ntohs(cma_port((struct sockaddr *) &id_priv->id.route.addr.src_addr));
 	if (snum < PROT_SOCK && !capable(CAP_NET_BIND_SERVICE))
 		return -EACCES;
 
 	bind_list = idr_find(ps, snum);
-	if (!bind_list)
-		return cma_alloc_port(ps, id_priv, snum);
-
-	/*
-	 * We don't support binding to any address if anyone is bound to
-	 * a specific address on the same port.
-	 */
-	if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr))
-		return -EADDRNOTAVAIL;
-
-	hlist_for_each_entry(cur_id, node, &bind_list->owners, node) {
-		if (cma_any_addr((struct sockaddr *) &cur_id->id.route.addr.src_addr))
-			return -EADDRNOTAVAIL;
-
-		cur_sin = (struct sockaddr_in *) &cur_id->id.route.addr.src_addr;
-		if (sin->sin_addr.s_addr == cur_sin->sin_addr.s_addr)
-			return -EADDRINUSE;
+	if (!bind_list) {
+		ret = cma_alloc_port(ps, id_priv, snum);
+	} else {
+		ret = cma_check_port(bind_list, id_priv, id_priv->reuseaddr);
+		if (!ret)
+			cma_bind_port(bind_list, id_priv);
 	}
+	return ret;
+}
 
-	cma_bind_port(bind_list, id_priv);
-	return 0;
+static int cma_bind_listen(struct rdma_id_private *id_priv)
+{
+	struct rdma_bind_list *bind_list = id_priv->bind_list;
+	int ret = 0;
+
+	mutex_lock(&lock);
+	if (bind_list->owners.first->next)
+		ret = cma_check_port(bind_list, id_priv, 0);
+	mutex_unlock(&lock);
+	return ret;
 }
 
 static int cma_get_port(struct rdma_id_private *id_priv)
@@ -2253,6 +2274,56 @@ static int cma_check_linklocal(struct rdma_dev_addr *dev_addr,
 	return 0;
 }
 
+int rdma_listen(struct rdma_cm_id *id, int backlog)
+{
+	struct rdma_id_private *id_priv;
+	int ret;
+
+	id_priv = container_of(id, struct rdma_id_private, id);
+	if (id_priv->state == CMA_IDLE) {
+		((struct sockaddr *) &id->route.addr.src_addr)->sa_family = AF_INET;
+		ret = rdma_bind_addr(id, (struct sockaddr *) &id->route.addr.src_addr);
+		if (ret)
+			return ret;
+	}
+
+	if (!cma_comp_exch(id_priv, CMA_ADDR_BOUND, CMA_LISTEN))
+		return -EINVAL;
+
+	if (id_priv->reuseaddr) {
+		ret = cma_bind_listen(id_priv);
+		if (ret)
+			goto err;
+	}
+
+	id_priv->backlog = backlog;
+	if (id->device) {
+		switch (rdma_node_get_transport(id->device->node_type)) {
+		case RDMA_TRANSPORT_IB:
+			ret = cma_ib_listen(id_priv);
+			if (ret)
+				goto err;
+			break;
+		case RDMA_TRANSPORT_IWARP:
+			ret = cma_iw_listen(id_priv, backlog);
+			if (ret)
+				goto err;
+			break;
+		default:
+			ret = -ENOSYS;
+			goto err;
+		}
+	} else
+		cma_listen_on_all(id_priv);
+
+	return 0;
+err:
+	id_priv->backlog = 0;
+	cma_comp_exch(id_priv, CMA_LISTEN, CMA_ADDR_BOUND);
+	return ret;
+}
+EXPORT_SYMBOL(rdma_listen);
+
 int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr)
 {
 	struct rdma_id_private *id_priv;
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index 2a1e9ae134b..a9c042345c6 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -725,7 +725,7 @@ static int cm_conn_rep_handler(struct iwcm_id_private *cm_id_priv,
 	 */
 	clear_bit(IWCM_F_CONNECT_WAIT, &cm_id_priv->flags);
 	BUG_ON(cm_id_priv->state != IW_CM_STATE_CONN_SENT);
-	if (iw_event->status == IW_CM_EVENT_STATUS_ACCEPTED) {
+	if (iw_event->status == 0) {
 		cm_id_priv->id.local_addr = iw_event->local_addr;
 		cm_id_priv->id.remote_addr = iw_event->remote_addr;
 		cm_id_priv->state = IW_CM_STATE_ESTABLISHED;
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index ec1e9da1488..b3fa798525b 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -883,6 +883,13 @@ static int ucma_set_option_id(struct ucma_context *ctx, int optname,
 		}
 		rdma_set_service_type(ctx->cm_id, *((u8 *) optval));
 		break;
+	case RDMA_OPTION_ID_REUSEADDR:
+		if (optlen != sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		ret = rdma_set_reuseaddr(ctx->cm_id, *((int *) optval) ? 1 : 0);
+		break;
 	default:
 		ret = -ENOSYS;
 	}
diff --git a/drivers/infiniband/hw/amso1100/c2_ae.c b/drivers/infiniband/hw/amso1100/c2_ae.c
index 62af74295db..24f9e3a90e8 100644
--- a/drivers/infiniband/hw/amso1100/c2_ae.c
+++ b/drivers/infiniband/hw/amso1100/c2_ae.c
@@ -157,7 +157,7 @@ void c2_ae_event(struct c2_dev *c2dev, u32 mq_index)
 	int status;
 
 	/*
-	 * retreive the message
+	 * retrieve the message
 	 */
 	wr = c2_mq_consume(mq);
 	if (!wr)
diff --git a/drivers/infiniband/hw/amso1100/c2_qp.c b/drivers/infiniband/hw/amso1100/c2_qp.c
index d8f4bb8bf42..0d7b6f23caf 100644
--- a/drivers/infiniband/hw/amso1100/c2_qp.c
+++ b/drivers/infiniband/hw/amso1100/c2_qp.c
@@ -612,7 +612,7 @@ void c2_free_qp(struct c2_dev *c2dev, struct c2_qp *qp)
 	c2_unlock_cqs(send_cq, recv_cq);
 
 	/*
-	 * Destory qp in the rnic...
+	 * Destroy qp in the rnic...
 	 */
 	destroy_qp(c2dev, qp);
 
diff --git a/drivers/infiniband/hw/amso1100/c2_wr.h b/drivers/infiniband/hw/amso1100/c2_wr.h
index c65fbdd6e46..8d4b4ca463c 100644
--- a/drivers/infiniband/hw/amso1100/c2_wr.h
+++ b/drivers/infiniband/hw/amso1100/c2_wr.h
@@ -131,7 +131,7 @@ enum c2wr_ids {
 	 *          All the preceding IDs are fixed, and must not change.
 	 *          You can add new IDs, but must not remove or reorder
 	 *          any IDs. If you do, YOU will ruin any hope of
-	 *          compatability between versions.
+	 *          compatibility between versions.
 	 */
 	CCWR_LAST,
 
@@ -242,7 +242,7 @@ enum c2_acf {
 /*
  *  to fix bug 1815 we define the max size allowable of the
  *  terminate message (per the IETF spec).Refer to the IETF
- *  protocal specification, section 12.1.6, page 64)
+ *  protocol specification, section 12.1.6, page 64)
  *  The message is prefixed by 20 types of DDP info.
  *
  *  Then the message has 6 bytes for the terminate control
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 3216bcad7e8..23918413899 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -338,8 +338,9 @@ static struct rtable *find_route(struct t3cdev *dev, __be32 local_ip,
 				 __be16 peer_port, u8 tos)
 {
 	struct rtable *rt;
+	struct flowi4 fl4;
 
-	rt = ip_route_output_ports(&init_net, NULL, peer_ip, local_ip,
+	rt = ip_route_output_ports(&init_net, &fl4, NULL, peer_ip, local_ip,
 				   peer_port, local_port, IPPROTO_TCP,
 				   tos, 0);
 	if (IS_ERR(rt))
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 9d8dcfab2b3..f660cd04ec2 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -315,8 +315,9 @@ static struct rtable *find_route(struct c4iw_dev *dev, __be32 local_ip,
 				 __be16 peer_port, u8 tos)
 {
 	struct rtable *rt;
+	struct flowi4 fl4;
 
-	rt = ip_route_output_ports(&init_net, NULL, peer_ip, local_ip,
+	rt = ip_route_output_ports(&init_net, &fl4, NULL, peer_ip, local_ip,
 				   peer_port, local_port, IPPROTO_TCP,
 				   tos, 0);
 	if (IS_ERR(rt))
@@ -1198,9 +1199,7 @@ static int pass_open_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 	}
 	PDBG("%s ep %p status %d error %d\n", __func__, ep,
 	     rpl->status, status2errno(rpl->status));
-	ep->com.wr_wait.ret = status2errno(rpl->status);
-	ep->com.wr_wait.done = 1;
-	wake_up(&ep->com.wr_wait.wait);
+	c4iw_wake_up(&ep->com.wr_wait, status2errno(rpl->status));
 
 	return 0;
 }
@@ -1234,9 +1233,7 @@ static int close_listsrv_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 	struct c4iw_listen_ep *ep = lookup_stid(t, stid);
 
 	PDBG("%s ep %p\n", __func__, ep);
-	ep->com.wr_wait.ret = status2errno(rpl->status);
-	ep->com.wr_wait.done = 1;
-	wake_up(&ep->com.wr_wait.wait);
+	c4iw_wake_up(&ep->com.wr_wait, status2errno(rpl->status));
 	return 0;
 }
 
@@ -1466,7 +1463,7 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 	struct c4iw_qp_attributes attrs;
 	int disconnect = 1;
 	int release = 0;
-	int closing = 0;
+	int abort = 0;
 	struct tid_info *t = dev->rdev.lldi.tids;
 	unsigned int tid = GET_TID(hdr);
 
@@ -1492,23 +1489,22 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		 * in rdma connection migration (see c4iw_accept_cr()).
 		 */
 		__state_set(&ep->com, CLOSING);
-		ep->com.wr_wait.done = 1;
-		ep->com.wr_wait.ret = -ECONNRESET;
 		PDBG("waking up ep %p tid %u\n", ep, ep->hwtid);
-		wake_up(&ep->com.wr_wait.wait);
+		c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
 		break;
 	case MPA_REP_SENT:
 		__state_set(&ep->com, CLOSING);
-		ep->com.wr_wait.done = 1;
-		ep->com.wr_wait.ret = -ECONNRESET;
 		PDBG("waking up ep %p tid %u\n", ep, ep->hwtid);
-		wake_up(&ep->com.wr_wait.wait);
+		c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
 		break;
 	case FPDU_MODE:
 		start_ep_timer(ep);
 		__state_set(&ep->com, CLOSING);
-		closing = 1;
+		attrs.next_state = C4IW_QP_STATE_CLOSING;
+		abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
+				       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
 		peer_close_upcall(ep);
+		disconnect = 1;
 		break;
 	case ABORTING:
 		disconnect = 0;
@@ -1536,11 +1532,6 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		BUG_ON(1);
 	}
 	mutex_unlock(&ep->com.mutex);
-	if (closing) {
-		attrs.next_state = C4IW_QP_STATE_CLOSING;
-		c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
-			       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
-	}
 	if (disconnect)
 		c4iw_ep_disconnect(ep, 0, GFP_KERNEL);
 	if (release)
@@ -1581,9 +1572,7 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 	/*
 	 * Wake up any threads in rdma_init() or rdma_fini().
 	 */
-	ep->com.wr_wait.done = 1;
-	ep->com.wr_wait.ret = -ECONNRESET;
-	wake_up(&ep->com.wr_wait.wait);
+	c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
 
 	mutex_lock(&ep->com.mutex);
 	switch (ep->com.state) {
@@ -1710,14 +1699,14 @@ static int terminate(struct c4iw_dev *dev, struct sk_buff *skb)
 	ep = lookup_tid(t, tid);
 	BUG_ON(!ep);
 
-	if (ep->com.qp) {
+	if (ep && ep->com.qp) {
 		printk(KERN_WARNING MOD "TERM received tid %u qpid %u\n", tid,
 		       ep->com.qp->wq.sq.qid);
 		attrs.next_state = C4IW_QP_STATE_TERMINATE;
 		c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
 			       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
 	} else
-		printk(KERN_WARNING MOD "TERM received tid %u no qp\n", tid);
+		printk(KERN_WARNING MOD "TERM received tid %u no ep/qp\n", tid);
 
 	return 0;
 }
@@ -2296,14 +2285,8 @@ static int fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb)
 		ret = (int)((be64_to_cpu(rpl->data[0]) >> 8) & 0xff);
 		wr_waitp = (struct c4iw_wr_wait *)(__force unsigned long) rpl->data[1];
 		PDBG("%s wr_waitp %p ret %u\n", __func__, wr_waitp, ret);
-		if (wr_waitp) {
-			if (ret)
-				wr_waitp->ret = -ret;
-			else
-				wr_waitp->ret = 0;
-			wr_waitp->done = 1;
-			wake_up(&wr_waitp->wait);
-		}
+		if (wr_waitp)
+			c4iw_wake_up(wr_waitp, ret ? -ret : 0);
 		kfree_skb(skb);
 		break;
 	case 2:
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index e29172c2afc..40a13cc633a 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -44,7 +44,7 @@ MODULE_DESCRIPTION("Chelsio T4 RDMA Driver");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_VERSION(DRV_VERSION);
 
-static LIST_HEAD(dev_list);
+static LIST_HEAD(uld_ctx_list);
 static DEFINE_MUTEX(dev_mutex);
 
 static struct dentry *c4iw_debugfs_root;
@@ -370,18 +370,23 @@ static void c4iw_rdev_close(struct c4iw_rdev *rdev)
 	c4iw_destroy_resource(&rdev->resource);
 }
 
-static void c4iw_remove(struct c4iw_dev *dev)
+struct uld_ctx {
+	struct list_head entry;
+	struct cxgb4_lld_info lldi;
+	struct c4iw_dev *dev;
+};
+
+static void c4iw_remove(struct uld_ctx *ctx)
 {
-	PDBG("%s c4iw_dev %p\n", __func__,  dev);
-	list_del(&dev->entry);
-	if (dev->registered)
-		c4iw_unregister_device(dev);
-	c4iw_rdev_close(&dev->rdev);
-	idr_destroy(&dev->cqidr);
-	idr_destroy(&dev->qpidr);
-	idr_destroy(&dev->mmidr);
-	iounmap(dev->rdev.oc_mw_kva);
-	ib_dealloc_device(&dev->ibdev);
+	PDBG("%s c4iw_dev %p\n", __func__,  ctx->dev);
+	c4iw_unregister_device(ctx->dev);
+	c4iw_rdev_close(&ctx->dev->rdev);
+	idr_destroy(&ctx->dev->cqidr);
+	idr_destroy(&ctx->dev->qpidr);
+	idr_destroy(&ctx->dev->mmidr);
+	iounmap(ctx->dev->rdev.oc_mw_kva);
+	ib_dealloc_device(&ctx->dev->ibdev);
+	ctx->dev = NULL;
 }
 
 static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
@@ -392,7 +397,7 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
 	devp = (struct c4iw_dev *)ib_alloc_device(sizeof(*devp));
 	if (!devp) {
 		printk(KERN_ERR MOD "Cannot allocate ib device\n");
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 	devp->rdev.lldi = *infop;
 
@@ -402,27 +407,23 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
 	devp->rdev.oc_mw_kva = ioremap_wc(devp->rdev.oc_mw_pa,
 					       devp->rdev.lldi.vr->ocq.size);
 
-	printk(KERN_INFO MOD "ocq memory: "
+	PDBG(KERN_INFO MOD "ocq memory: "
 	       "hw_start 0x%x size %u mw_pa 0x%lx mw_kva %p\n",
 	       devp->rdev.lldi.vr->ocq.start, devp->rdev.lldi.vr->ocq.size,
 	       devp->rdev.oc_mw_pa, devp->rdev.oc_mw_kva);
 
-	mutex_lock(&dev_mutex);
-
 	ret = c4iw_rdev_open(&devp->rdev);
 	if (ret) {
 		mutex_unlock(&dev_mutex);
 		printk(KERN_ERR MOD "Unable to open CXIO rdev err %d\n", ret);
 		ib_dealloc_device(&devp->ibdev);
-		return NULL;
+		return ERR_PTR(ret);
 	}
 
 	idr_init(&devp->cqidr);
 	idr_init(&devp->qpidr);
 	idr_init(&devp->mmidr);
 	spin_lock_init(&devp->lock);
-	list_add_tail(&devp->entry, &dev_list);
-	mutex_unlock(&dev_mutex);
 
 	if (c4iw_debugfs_root) {
 		devp->debugfs_root = debugfs_create_dir(
@@ -435,7 +436,7 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
 
 static void *c4iw_uld_add(const struct cxgb4_lld_info *infop)
 {
-	struct c4iw_dev *dev;
+	struct uld_ctx *ctx;
 	static int vers_printed;
 	int i;
 
@@ -443,25 +444,33 @@ static void *c4iw_uld_add(const struct cxgb4_lld_info *infop)
 		printk(KERN_INFO MOD "Chelsio T4 RDMA Driver - version %s\n",
 		       DRV_VERSION);
 
-	dev = c4iw_alloc(infop);
-	if (!dev)
+	ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
+	if (!ctx) {
+		ctx = ERR_PTR(-ENOMEM);
 		goto out;
+	}
+	ctx->lldi = *infop;
 
 	PDBG("%s found device %s nchan %u nrxq %u ntxq %u nports %u\n",
-	     __func__, pci_name(dev->rdev.lldi.pdev),
-	     dev->rdev.lldi.nchan, dev->rdev.lldi.nrxq,
-	     dev->rdev.lldi.ntxq, dev->rdev.lldi.nports);
+	     __func__, pci_name(ctx->lldi.pdev),
+	     ctx->lldi.nchan, ctx->lldi.nrxq,
+	     ctx->lldi.ntxq, ctx->lldi.nports);
+
+	mutex_lock(&dev_mutex);
+	list_add_tail(&ctx->entry, &uld_ctx_list);
+	mutex_unlock(&dev_mutex);
 
-	for (i = 0; i < dev->rdev.lldi.nrxq; i++)
-		PDBG("rxqid[%u] %u\n", i, dev->rdev.lldi.rxq_ids[i]);
+	for (i = 0; i < ctx->lldi.nrxq; i++)
+		PDBG("rxqid[%u] %u\n", i, ctx->lldi.rxq_ids[i]);
 out:
-	return dev;
+	return ctx;
 }
 
 static int c4iw_uld_rx_handler(void *handle, const __be64 *rsp,
 			const struct pkt_gl *gl)
 {
-	struct c4iw_dev *dev = handle;
+	struct uld_ctx *ctx = handle;
+	struct c4iw_dev *dev = ctx->dev;
 	struct sk_buff *skb;
 	const struct cpl_act_establish *rpl;
 	unsigned int opcode;
@@ -503,47 +512,49 @@ nomem:
 
 static int c4iw_uld_state_change(void *handle, enum cxgb4_state new_state)
 {
-	struct c4iw_dev *dev = handle;
+	struct uld_ctx *ctx = handle;
 
 	PDBG("%s new_state %u\n", __func__, new_state);
 	switch (new_state) {
 	case CXGB4_STATE_UP:
-		printk(KERN_INFO MOD "%s: Up\n", pci_name(dev->rdev.lldi.pdev));
-		if (!dev->registered) {
-			int ret;
-			ret = c4iw_register_device(dev);
-			if (ret)
+		printk(KERN_INFO MOD "%s: Up\n", pci_name(ctx->lldi.pdev));
+		if (!ctx->dev) {
+			int ret = 0;
+
+			ctx->dev = c4iw_alloc(&ctx->lldi);
+			if (!IS_ERR(ctx->dev))
+				ret = c4iw_register_device(ctx->dev);
+			if (IS_ERR(ctx->dev) || ret)
 				printk(KERN_ERR MOD
 				       "%s: RDMA registration failed: %d\n",
-				       pci_name(dev->rdev.lldi.pdev), ret);
+				       pci_name(ctx->lldi.pdev), ret);
 		}
 		break;
 	case CXGB4_STATE_DOWN:
 		printk(KERN_INFO MOD "%s: Down\n",
-		       pci_name(dev->rdev.lldi.pdev));
-		if (dev->registered)
-			c4iw_unregister_device(dev);
+		       pci_name(ctx->lldi.pdev));
+		if (ctx->dev)
+			c4iw_remove(ctx);
 		break;
 	case CXGB4_STATE_START_RECOVERY:
 		printk(KERN_INFO MOD "%s: Fatal Error\n",
-		       pci_name(dev->rdev.lldi.pdev));
-		dev->rdev.flags |= T4_FATAL_ERROR;
-		if (dev->registered) {
+		       pci_name(ctx->lldi.pdev));
+		if (ctx->dev) {
 			struct ib_event event;
 
+			ctx->dev->rdev.flags |= T4_FATAL_ERROR;
 			memset(&event, 0, sizeof event);
 			event.event  = IB_EVENT_DEVICE_FATAL;
-			event.device = &dev->ibdev;
+			event.device = &ctx->dev->ibdev;
 			ib_dispatch_event(&event);
-			c4iw_unregister_device(dev);
+			c4iw_remove(ctx);
 		}
 		break;
 	case CXGB4_STATE_DETACH:
 		printk(KERN_INFO MOD "%s: Detach\n",
-		       pci_name(dev->rdev.lldi.pdev));
-		mutex_lock(&dev_mutex);
-		c4iw_remove(dev);
-		mutex_unlock(&dev_mutex);
+		       pci_name(ctx->lldi.pdev));
+		if (ctx->dev)
+			c4iw_remove(ctx);
 		break;
 	}
 	return 0;
@@ -576,11 +587,13 @@ static int __init c4iw_init_module(void)
 
 static void __exit c4iw_exit_module(void)
 {
-	struct c4iw_dev *dev, *tmp;
+	struct uld_ctx *ctx, *tmp;
 
 	mutex_lock(&dev_mutex);
-	list_for_each_entry_safe(dev, tmp, &dev_list, entry) {
-		c4iw_remove(dev);
+	list_for_each_entry_safe(ctx, tmp, &uld_ctx_list, entry) {
+		if (ctx->dev)
+			c4iw_remove(ctx);
+		kfree(ctx);
 	}
 	mutex_unlock(&dev_mutex);
 	cxgb4_unregister_uld(CXGB4_ULD_RDMA);
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index 9f6166f5926..35d2a5dd9bb 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -131,42 +131,58 @@ static inline int c4iw_num_stags(struct c4iw_rdev *rdev)
 
 #define C4IW_WR_TO (10*HZ)
 
+enum {
+	REPLY_READY = 0,
+};
+
 struct c4iw_wr_wait {
 	wait_queue_head_t wait;
-	int done;
+	unsigned long status;
 	int ret;
 };
 
 static inline void c4iw_init_wr_wait(struct c4iw_wr_wait *wr_waitp)
 {
 	wr_waitp->ret = 0;
-	wr_waitp->done = 0;
+	wr_waitp->status = 0;
 	init_waitqueue_head(&wr_waitp->wait);
 }
 
+static inline void c4iw_wake_up(struct c4iw_wr_wait *wr_waitp, int ret)
+{
+	wr_waitp->ret = ret;
+	set_bit(REPLY_READY, &wr_waitp->status);
+	wake_up(&wr_waitp->wait);
+}
+
 static inline int c4iw_wait_for_reply(struct c4iw_rdev *rdev,
 				 struct c4iw_wr_wait *wr_waitp,
 				 u32 hwtid, u32 qpid,
 				 const char *func)
 {
 	unsigned to = C4IW_WR_TO;
-	do {
+	int ret;
 
-		wait_event_timeout(wr_waitp->wait, wr_waitp->done, to);
-		if (!wr_waitp->done) {
+	do {
+		ret = wait_event_timeout(wr_waitp->wait,
+			test_and_clear_bit(REPLY_READY, &wr_waitp->status), to);
+		if (!ret) {
 			printk(KERN_ERR MOD "%s - Device %s not responding - "
 			       "tid %u qpid %u\n", func,
 			       pci_name(rdev->lldi.pdev), hwtid, qpid);
+			if (c4iw_fatal_error(rdev)) {
+				wr_waitp->ret = -EIO;
+				break;
+			}
 			to = to << 2;
 		}
-	} while (!wr_waitp->done);
+	} while (!ret);
 	if (wr_waitp->ret)
-		printk(KERN_WARNING MOD "%s: FW reply %d tid %u qpid %u\n",
-		       pci_name(rdev->lldi.pdev), wr_waitp->ret, hwtid, qpid);
+		PDBG("%s: FW reply %d tid %u qpid %u\n",
+		     pci_name(rdev->lldi.pdev), wr_waitp->ret, hwtid, qpid);
 	return wr_waitp->ret;
 }
 
-
 struct c4iw_dev {
 	struct ib_device ibdev;
 	struct c4iw_rdev rdev;
@@ -175,9 +191,7 @@ struct c4iw_dev {
 	struct idr qpidr;
 	struct idr mmidr;
 	spinlock_t lock;
-	struct list_head entry;
 	struct dentry *debugfs_root;
-	u8 registered;
 };
 
 static inline struct c4iw_dev *to_c4iw_dev(struct ib_device *ibdev)
diff --git a/drivers/infiniband/hw/cxgb4/provider.c b/drivers/infiniband/hw/cxgb4/provider.c
index f66dd8bf512..5b9e4220ca0 100644
--- a/drivers/infiniband/hw/cxgb4/provider.c
+++ b/drivers/infiniband/hw/cxgb4/provider.c
@@ -516,7 +516,6 @@ int c4iw_register_device(struct c4iw_dev *dev)
 		if (ret)
 			goto bail2;
 	}
-	dev->registered = 1;
 	return 0;
 bail2:
 	ib_unregister_device(&dev->ibdev);
@@ -535,6 +534,5 @@ void c4iw_unregister_device(struct c4iw_dev *dev)
 				   c4iw_class_attributes[i]);
 	ib_unregister_device(&dev->ibdev);
 	kfree(dev->ibdev.iwcm);
-	dev->registered = 0;
 	return;
 }
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 70a5a3c646d..3b773b05a89 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -214,7 +214,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 		V_FW_RI_RES_WR_HOSTFCMODE(0) |	/* no host cidx updates */
 		V_FW_RI_RES_WR_CPRIO(0) |	/* don't keep in chip cache */
 		V_FW_RI_RES_WR_PCIECHN(0) |	/* set by uP at ri_init time */
-		t4_sq_onchip(&wq->sq) ? F_FW_RI_RES_WR_ONCHIP : 0 |
+		(t4_sq_onchip(&wq->sq) ? F_FW_RI_RES_WR_ONCHIP : 0) |
 		V_FW_RI_RES_WR_IQID(scq->cqid));
 	res->u.sqrq.dcaen_to_eqsize = cpu_to_be32(
 		V_FW_RI_RES_WR_DCAEN(0) |
@@ -1210,7 +1210,6 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 			if (ret) {
 				if (internal)
 					c4iw_get_ep(&qhp->ep->com);
-				disconnect = abort = 1;
 				goto err;
 			}
 			break;
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index 24af12fc822..c0221eec881 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -269,11 +269,8 @@ struct t4_swsqe {
 
 static inline pgprot_t t4_pgprot_wc(pgprot_t prot)
 {
-#if defined(__i386__) || defined(__x86_64__)
+#if defined(__i386__) || defined(__x86_64__) || defined(CONFIG_PPC64)
 	return pgprot_writecombine(prot);
-#elif defined(CONFIG_PPC64)
-	return __pgprot((pgprot_val(prot) | _PAGE_NO_CACHE) &
-			~(pgprot_t)_PAGE_GUARDED);
 #else
 	return pgprot_noncached(prot);
 #endif
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 47db4bf3462..be24ac72611 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -398,7 +398,6 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	struct ipath_devdata *dd;
 	unsigned long long addr;
 	u32 bar0 = 0, bar1 = 0;
-	u8 rev;
 
 	dd = ipath_alloc_devdata(pdev);
 	if (IS_ERR(dd)) {
@@ -540,13 +539,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 		goto bail_regions;
 	}
 
-	ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-	if (ret) {
-		ipath_dev_err(dd, "Failed to read PCI revision ID unit "
-			      "%u: err %d\n", dd->ipath_unit, -ret);
-		goto bail_regions;	/* shouldn't ever happen */
-	}
-	dd->ipath_pcirev = rev;
+	dd->ipath_pcirev = pdev->revision;
 
 #if defined(__powerpc__)
 	/* There isn't a generic way to specify writethrough mappings */
@@ -2392,7 +2385,7 @@ void ipath_shutdown_device(struct ipath_devdata *dd)
 	/*
 	 * clear SerdesEnable and turn the leds off; do this here because
 	 * we are unloading, so don't count on interrupts to move along
-	 * Turn the LEDs off explictly for the same reason.
+	 * Turn the LEDs off explicitly for the same reason.
 	 */
 	dd->ipath_f_quiet_serdes(dd);
 
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 6d4b29c4cd8..ee79a2d97b1 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -1972,7 +1972,7 @@ static int ipath_do_user_init(struct file *fp,
 	 * 0 to 1.  So for those chips, we turn it off and then back on.
 	 * This will (very briefly) affect any other open ports, but the
 	 * duration is very short, and therefore isn't an issue.  We
-	 * explictly set the in-memory tail copy to 0 beforehand, so we
+	 * explicitly set the in-memory tail copy to 0 beforehand, so we
 	 * don't have to wait to be sure the DMA update has happened
 	 * (chip resets head/tail to 0 on transition to enable).
 	 */
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index fef0f420125..7c1eebe8c7c 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -335,7 +335,7 @@ done:
  * @dd: the infinipath device
  *
  * sanity check at least some of the values after reset, and
- * ensure no receive or transmit (explictly, in case reset
+ * ensure no receive or transmit (explicitly, in case reset
  * failed
  */
 static int init_chip_reset(struct ipath_devdata *dd)
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 7420715256a..e8a2a915251 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -86,7 +86,7 @@ static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe)
 	}
 
 	/*
-	 * A GRH is expected to preceed the data even if not
+	 * A GRH is expected to precede the data even if not
 	 * present on the wire.
 	 */
 	length = swqe->length;
@@ -515,7 +515,7 @@ void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
 	}
 
 	/*
-	 * A GRH is expected to preceed the data even if not
+	 * A GRH is expected to precede the data even if not
 	 * present on the wire.
 	 */
 	wc.byte_len = tlen + sizeof(struct ib_grh);
diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.c b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
index be78f6643c0..f5cb13b2144 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
@@ -236,7 +236,7 @@ static int ipath_user_sdma_num_pages(const struct iovec *iov)
 	return 1 + ((epage - spage) >> PAGE_SHIFT);
 }
 
-/* truncate length to page boundry */
+/* truncate length to page boundary */
 static int ipath_user_sdma_page_length(unsigned long addr, unsigned long len)
 {
 	const unsigned long offset = addr & ~PAGE_MASK;
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index cfa3a2b2223..e74cdf9ef47 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1397,7 +1397,7 @@ static void handle_fin_pkt(struct nes_cm_node *cm_node)
 		cleanup_retrans_entry(cm_node);
 		cm_node->state = NES_CM_STATE_CLOSING;
 		send_ack(cm_node, NULL);
-		/* Wait for ACK as this is simultanous close..
+		/* Wait for ACK as this is simultaneous close..
 		* After we receive ACK, do not send anything..
 		* Just rm the node.. Done.. */
 		break;
@@ -2563,7 +2563,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 	u16 last_ae;
 	u8 original_hw_tcp_state;
 	u8 original_ibqp_state;
-	enum iw_cm_event_status disconn_status = IW_CM_EVENT_STATUS_OK;
+	int disconn_status = 0;
 	int issue_disconn = 0;
 	int issue_close = 0;
 	int issue_flush = 0;
@@ -2605,7 +2605,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			(last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
 		issue_disconn = 1;
 		if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET)
-			disconn_status = IW_CM_EVENT_STATUS_RESET;
+			disconn_status = -ECONNRESET;
 	}
 
 	if (((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
@@ -2666,7 +2666,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			cm_id->provider_data = nesqp;
 			/* Send up the close complete event */
 			cm_event.event = IW_CM_EVENT_CLOSE;
-			cm_event.status = IW_CM_EVENT_STATUS_OK;
+			cm_event.status = 0;
 			cm_event.provider_data = cm_id->provider_data;
 			cm_event.local_addr = cm_id->local_addr;
 			cm_event.remote_addr = cm_id->remote_addr;
@@ -2966,7 +2966,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	nes_add_ref(&nesqp->ibqp);
 
 	cm_event.event = IW_CM_EVENT_ESTABLISHED;
-	cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
+	cm_event.status = 0;
 	cm_event.provider_data = (void *)nesqp;
 	cm_event.local_addr = cm_id->local_addr;
 	cm_event.remote_addr = cm_id->remote_addr;
@@ -3377,7 +3377,7 @@ static void cm_event_connected(struct nes_cm_event *event)
 
 	/* notify OF layer we successfully created the requested connection */
 	cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
-	cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
+	cm_event.status = 0;
 	cm_event.provider_data = cm_id->provider_data;
 	cm_event.local_addr.sin_family = AF_INET;
 	cm_event.local_addr.sin_port = cm_id->local_addr.sin_port;
@@ -3484,7 +3484,7 @@ static void cm_event_reset(struct nes_cm_event *event)
 	nesqp->cm_id = NULL;
 	/* cm_id->provider_data = NULL; */
 	cm_event.event = IW_CM_EVENT_DISCONNECT;
-	cm_event.status = IW_CM_EVENT_STATUS_RESET;
+	cm_event.status = -ECONNRESET;
 	cm_event.provider_data = cm_id->provider_data;
 	cm_event.local_addr = cm_id->local_addr;
 	cm_event.remote_addr = cm_id->remote_addr;
@@ -3495,7 +3495,7 @@ static void cm_event_reset(struct nes_cm_event *event)
 	ret = cm_id->event_handler(cm_id, &cm_event);
 	atomic_inc(&cm_closes);
 	cm_event.event = IW_CM_EVENT_CLOSE;
-	cm_event.status = IW_CM_EVENT_STATUS_OK;
+	cm_event.status = 0;
 	cm_event.provider_data = cm_id->provider_data;
 	cm_event.local_addr = cm_id->local_addr;
 	cm_event.remote_addr = cm_id->remote_addr;
@@ -3534,7 +3534,7 @@ static void cm_event_mpa_req(struct nes_cm_event *event)
 			cm_node, cm_id, jiffies);
 
 	cm_event.event = IW_CM_EVENT_CONNECT_REQUEST;
-	cm_event.status = IW_CM_EVENT_STATUS_OK;
+	cm_event.status = 0;
 	cm_event.provider_data = (void *)cm_node;
 
 	cm_event.local_addr.sin_family = AF_INET;
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 08c194861af..96fa9a4cafd 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -80,7 +80,7 @@ static void nes_terminate_start_timer(struct nes_qp *nesqp);
 
 #ifdef CONFIG_INFINIBAND_NES_DEBUG
 static unsigned char *nes_iwarp_state_str[] = {
-	"Non-Existant",
+	"Non-Existent",
 	"Idle",
 	"RTS",
 	"Closing",
@@ -91,7 +91,7 @@ static unsigned char *nes_iwarp_state_str[] = {
 };
 
 static unsigned char *nes_tcp_state_str[] = {
-	"Non-Existant",
+	"Non-Existent",
 	"Closed",
 	"Listen",
 	"SYN Sent",
@@ -2885,9 +2885,8 @@ void nes_nic_ce_handler(struct nes_device *nesdev, struct nes_hw_nic_cq *cq)
 					if ((cqe_errv &
 							(NES_NIC_ERRV_BITS_IPV4_CSUM_ERR | NES_NIC_ERRV_BITS_TCPUDP_CSUM_ERR |
 							NES_NIC_ERRV_BITS_IPH_ERR | NES_NIC_ERRV_BITS_WQE_OVERRUN)) == 0) {
-						if (nesvnic->rx_checksum_disabled == 0) {
+						if (nesvnic->netdev->features & NETIF_F_RXCSUM)
 							rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
-						}
 					} else
 						nes_debug(NES_DBG_CQ, "%s: unsuccessfully checksummed TCP or UDP packet."
 								" errv = 0x%X, pkt_type = 0x%X.\n",
@@ -2897,7 +2896,7 @@ void nes_nic_ce_handler(struct nes_device *nesdev, struct nes_hw_nic_cq *cq)
 					if ((cqe_errv &
 							(NES_NIC_ERRV_BITS_IPV4_CSUM_ERR | NES_NIC_ERRV_BITS_IPH_ERR |
 							NES_NIC_ERRV_BITS_WQE_OVERRUN)) == 0) {
-						if (nesvnic->rx_checksum_disabled == 0) {
+						if (nesvnic->netdev->features & NETIF_F_RXCSUM) {
 							rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
 							/* nes_debug(NES_DBG_CQ, "%s: Reporting successfully checksummed IPv4 packet.\n",
 								  nesvnic->netdev->name); */
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index d2abe07133a..91594116f94 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -1245,7 +1245,6 @@ struct nes_vnic {
 	u8  next_qp_nic_index;
 	u8  of_device_registered;
 	u8  rdma_enabled;
-	u8  rx_checksum_disabled;
 	u32 lro_max_aggr;
 	struct net_lro_mgr lro_mgr;
 	struct net_lro_desc lro_desc[NES_MAX_LRO_DESCRIPTORS];
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 2c9c1933bbe..d3a1c41cfd2 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -902,7 +902,7 @@ static void nes_netdev_set_multicast_list(struct net_device *netdev)
 		nes_write_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL, nic_active);
 	}
 
-	nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscous = %d, All Multicast = %d.\n",
+	nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscuous = %d, All Multicast = %d.\n",
 		  mc_count, !!(netdev->flags & IFF_PROMISC),
 		  !!(netdev->flags & IFF_ALLMULTI));
 	if (!mc_all_on) {
@@ -1093,34 +1093,6 @@ static const char nes_ethtool_stringset[][ETH_GSTRING_LEN] = {
 };
 #define NES_ETHTOOL_STAT_COUNT  ARRAY_SIZE(nes_ethtool_stringset)
 
-/**
- * nes_netdev_get_rx_csum
- */
-static u32 nes_netdev_get_rx_csum (struct net_device *netdev)
-{
-	struct nes_vnic *nesvnic = netdev_priv(netdev);
-
-	if (nesvnic->rx_checksum_disabled)
-		return 0;
-	else
-		return 1;
-}
-
-
-/**
- * nes_netdev_set_rc_csum
- */
-static int nes_netdev_set_rx_csum(struct net_device *netdev, u32 enable)
-{
-	struct nes_vnic *nesvnic = netdev_priv(netdev);
-
-	if (enable)
-		nesvnic->rx_checksum_disabled = 0;
-	else
-		nesvnic->rx_checksum_disabled = 1;
-	return 0;
-}
-
 
 /**
  * nes_netdev_get_sset_count
@@ -1521,7 +1493,7 @@ static int nes_netdev_get_settings(struct net_device *netdev, struct ethtool_cmd
 	et_cmd->maxrxpkt = 511;
 
 	if (nesadapter->OneG_Mode) {
-		et_cmd->speed = SPEED_1000;
+		ethtool_cmd_speed_set(et_cmd, SPEED_1000);
 		if (phy_type == NES_PHY_TYPE_PUMA_1G) {
 			et_cmd->supported   = SUPPORTED_1000baseT_Full;
 			et_cmd->advertising = ADVERTISED_1000baseT_Full;
@@ -1560,7 +1532,7 @@ static int nes_netdev_get_settings(struct net_device *netdev, struct ethtool_cmd
 		et_cmd->advertising = ADVERTISED_10000baseT_Full;
 		et_cmd->phy_address = mac_index;
 	}
-	et_cmd->speed = SPEED_10000;
+	ethtool_cmd_speed_set(et_cmd, SPEED_10000);
 	et_cmd->autoneg = AUTONEG_DISABLE;
 	return 0;
 }
@@ -1598,19 +1570,10 @@ static int nes_netdev_set_settings(struct net_device *netdev, struct ethtool_cmd
 }
 
 
-static int nes_netdev_set_flags(struct net_device *netdev, u32 flags)
-{
-	return ethtool_op_set_flags(netdev, flags, ETH_FLAG_LRO);
-}
-
-
 static const struct ethtool_ops nes_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
 	.get_settings = nes_netdev_get_settings,
 	.set_settings = nes_netdev_set_settings,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.get_rx_csum = nes_netdev_get_rx_csum,
-	.get_sg = ethtool_op_get_sg,
 	.get_strings = nes_netdev_get_strings,
 	.get_sset_count = nes_netdev_get_sset_count,
 	.get_ethtool_stats = nes_netdev_get_ethtool_stats,
@@ -1619,13 +1582,6 @@ static const struct ethtool_ops nes_ethtool_ops = {
 	.set_coalesce = nes_netdev_set_coalesce,
 	.get_pauseparam = nes_netdev_get_pauseparam,
 	.set_pauseparam = nes_netdev_set_pauseparam,
-	.set_tx_csum = ethtool_op_set_tx_csum,
-	.set_rx_csum = nes_netdev_set_rx_csum,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = ethtool_op_set_tso,
-	.get_flags = ethtool_op_get_flags,
-	.set_flags = nes_netdev_set_flags,
 };
 
 
@@ -1727,12 +1683,11 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 	netdev->dev_addr[5] = (u8)u64temp;
 	memcpy(netdev->perm_addr, netdev->dev_addr, 6);
 
-	if ((nesvnic->logical_port < 2) || (nesdev->nesadapter->hw_rev != NE020_REV)) {
-		netdev->features |= NETIF_F_TSO | NETIF_F_SG | NETIF_F_IP_CSUM;
-		netdev->features |= NETIF_F_GSO | NETIF_F_TSO | NETIF_F_SG | NETIF_F_IP_CSUM;
-	} else {
-		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
-	}
+	netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_IP_CSUM;
+	if ((nesvnic->logical_port < 2) || (nesdev->nesadapter->hw_rev != NE020_REV))
+		netdev->hw_features |= NETIF_F_TSO;
+	netdev->features |= netdev->hw_features;
+	netdev->hw_features |= NETIF_F_LRO;
 
 	nes_debug(NES_DBG_INIT, "nesvnic = %p, reported features = 0x%lX, QPid = %d,"
 			" nic_index = %d, logical_port = %d, mac_index = %d.\n",
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 26d8018c0a7..95ca93ceeda 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1484,7 +1484,7 @@ static int nes_destroy_qp(struct ib_qp *ibqp)
 			(nesqp->ibqp_state == IB_QPS_RTR)) && (nesqp->cm_id)) {
 		cm_id = nesqp->cm_id;
 		cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
-		cm_event.status = IW_CM_EVENT_STATUS_TIMEOUT;
+		cm_event.status = -ETIMEDOUT;
 		cm_event.local_addr = cm_id->local_addr;
 		cm_event.remote_addr = cm_id->remote_addr;
 		cm_event.private_data = NULL;
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 73225eee3cc..769a1d9da4b 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -653,7 +653,7 @@ struct diag_observer_list_elt;
 
 /* device data struct now contains only "general per-device" info.
  * fields related to a physical IB port are in a qib_pportdata struct,
- * described above) while fields only used by a particualr chip-type are in
+ * described above) while fields only used by a particular chip-type are in
  * a qib_chipdata struct, whose contents are opaque to this file.
  */
 struct qib_devdata {
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index 75bfad16c11..406fca50d03 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -1539,7 +1539,7 @@ done_chk_sdma:
 
 		/*
 		 * If process has NOT already set it's affinity, select and
-		 * reserve a processor for it, as a rendevous for all
+		 * reserve a processor for it, as a rendezvous for all
 		 * users of the driver.  If they don't actually later
 		 * set affinity to this cpu, or set it to some other cpu,
 		 * it just means that sooner or later we don't recommend
@@ -1657,7 +1657,7 @@ static int qib_do_user_init(struct file *fp,
 	 * 0 to 1.  So for those chips, we turn it off and then back on.
 	 * This will (very briefly) affect any other open ctxts, but the
 	 * duration is very short, and therefore isn't an issue.  We
-	 * explictly set the in-memory tail copy to 0 beforehand, so we
+	 * explicitly set the in-memory tail copy to 0 beforehand, so we
 	 * don't have to wait to be sure the DMA update has happened
 	 * (chip resets head/tail to 0 on transition to enable).
 	 */
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 774dea897e9..d8ca0a0b970 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -1799,7 +1799,7 @@ static int qib_6120_setup_reset(struct qib_devdata *dd)
 	/*
 	 * Keep chip from being accessed until we are ready.  Use
 	 * writeq() directly, to allow the write even though QIB_PRESENT
-	 * isnt' set.
+	 * isn't set.
 	 */
 	dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
 	dd->int_counter = 0; /* so we check interrupts work again */
@@ -2171,7 +2171,7 @@ static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op,
 		 * Init the context registers also; if we were
 		 * disabled, tail and head should both be zero
 		 * already from the enable, but since we don't
-		 * know, we have to do it explictly.
+		 * know, we have to do it explicitly.
 		 */
 		val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
 		qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index de799f17cb9..c765a2eb04c 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -2111,7 +2111,7 @@ static int qib_setup_7220_reset(struct qib_devdata *dd)
 	/*
 	 * Keep chip from being accessed until we are ready.  Use
 	 * writeq() directly, to allow the write even though QIB_PRESENT
-	 * isnt' set.
+	 * isn't set.
 	 */
 	dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
 	dd->int_counter = 0; /* so we check interrupts work again */
@@ -2479,7 +2479,7 @@ static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
 		 * we command the link down.  As with width, only write the
 		 * actual register if the link is currently down, otherwise
 		 * takes effect on next link change.  Since setting is being
-		 * explictly requested (via MAD or sysfs), clear autoneg
+		 * explicitly requested (via MAD or sysfs), clear autoneg
 		 * failure status if speed autoneg is enabled.
 		 */
 		ppd->link_speed_enabled = val;
@@ -2778,7 +2778,7 @@ static void rcvctrl_7220_mod(struct qib_pportdata *ppd, unsigned int op,
 		 * Init the context registers also; if we were
 		 * disabled, tail and head should both be zero
 		 * already from the enable, but since we don't
-		 * know, we have to do it explictly.
+		 * know, we have to do it explicitly.
 		 */
 		val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
 		qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 4a2d21e15a7..9f53e68a096 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -3299,7 +3299,7 @@ static int qib_do_7322_reset(struct qib_devdata *dd)
 	/*
 	 * Keep chip from being accessed until we are ready.  Use
 	 * writeq() directly, to allow the write even though QIB_PRESENT
-	 * isnt' set.
+	 * isn't set.
 	 */
 	dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR);
 	dd->flags |= QIB_DOING_RESET;
@@ -3727,7 +3727,7 @@ static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
 		/*
 		 * As with width, only write the actual register if the
 		 * link is currently down, otherwise takes effect on next
-		 * link change.  Since setting is being explictly requested
+		 * link change.  Since setting is being explicitly requested
 		 * (via MAD or sysfs), clear autoneg failure status if speed
 		 * autoneg is enabled.
 		 */
@@ -4163,7 +4163,7 @@ static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op,
 		 * Init the context registers also; if we were
 		 * disabled, tail and head should both be zero
 		 * already from the enable, but since we don't
-		 * know, we have to do it explictly.
+		 * know, we have to do it explicitly.
 		 */
 		val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
 		qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
@@ -7483,7 +7483,7 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd)
 	/*       Baseline Wander Correction Gain [13:4-0] (leave as default) */
 	/*       Baseline Wander Correction Gain [3:7-5] (leave as default) */
 	/*       Data Rate Select [5:7-6] (leave as default) */
-	/*       RX Parralel Word Width [3:10-8] (leave as default) */
+	/*       RX Parallel Word Width [3:10-8] (leave as default) */
 
 	/* RX REST */
 	/*       Single- or Multi-channel reset */
@@ -7534,7 +7534,8 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd)
 	ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10));
 	tstart = get_jiffies_64();
 	while (chan_done &&
-	       !time_after64(tstart, tstart + msecs_to_jiffies(500))) {
+	       !time_after64(get_jiffies_64(),
+			tstart + msecs_to_jiffies(500))) {
 		msleep(20);
 		for (chan = 0; chan < SERDES_CHANS; ++chan) {
 			rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx),
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index ffefb78b894..a01f3fce8eb 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -346,7 +346,7 @@ done:
  * @dd: the qlogic_ib device
  *
  * sanity check at least some of the values after reset, and
- * ensure no receive or transmit (explictly, in case reset
+ * ensure no receive or transmit (explicitly, in case reset
  * failed
  */
 static int init_after_reset(struct qib_devdata *dd)
diff --git a/drivers/infiniband/hw/qib/qib_mad.h b/drivers/infiniband/hw/qib/qib_mad.h
index 147aff9117d..7840ab593bc 100644
--- a/drivers/infiniband/hw/qib/qib_mad.h
+++ b/drivers/infiniband/hw/qib/qib_mad.h
@@ -73,7 +73,7 @@ struct ib_mad_notice_attr {
 
 		struct {
 			__be16	reserved;
-			__be16	lid;		/* LID where change occured */
+			__be16	lid;		/* LID where change occurred */
 			u8	reserved2;
 			u8	local_changes;	/* low bit - local changes */
 			__be32	new_cap_mask;	/* new capability mask */
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 48b6674cbc4..891cc2ff5f0 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -526,11 +526,8 @@ static int qib_tune_pcie_coalesce(struct qib_devdata *dd)
 	 */
 	devid = parent->device;
 	if (devid >= 0x25e2 && devid <= 0x25fa) {
-		u8 rev;
-
 		/* 5000 P/V/X/Z */
-		pci_read_config_byte(parent, PCI_REVISION_ID, &rev);
-		if (rev <= 0xb2)
+		if (parent->revision <= 0xb2)
 			bits = 1U << 10;
 		else
 			bits = 7U << 10;
diff --git a/drivers/infiniband/hw/qib/qib_twsi.c b/drivers/infiniband/hw/qib/qib_twsi.c
index 6f31ca5039d..ddde72e11ed 100644
--- a/drivers/infiniband/hw/qib/qib_twsi.c
+++ b/drivers/infiniband/hw/qib/qib_twsi.c
@@ -41,7 +41,7 @@
  * QLogic_IB "Two Wire Serial Interface" driver.
  * Originally written for a not-quite-i2c serial eeprom, which is
  * still used on some supported boards. Later boards have added a
- * variety of other uses, most board-specific, so teh bit-boffing
+ * variety of other uses, most board-specific, so the bit-boffing
  * part has been split off to this file, while the other parts
  * have been moved to chip-specific files.
  *
diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c
index 4a51fd1e9cb..828609fa4d2 100644
--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -116,7 +116,7 @@ static void qib_ud_loopback(struct qib_qp *sqp, struct qib_swqe *swqe)
 	}
 
 	/*
-	 * A GRH is expected to preceed the data even if not
+	 * A GRH is expected to precede the data even if not
 	 * present on the wire.
 	 */
 	length = swqe->length;
@@ -520,7 +520,7 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
 		goto drop;
 
 	/*
-	 * A GRH is expected to preceed the data even if not
+	 * A GRH is expected to precede the data even if not
 	 * present on the wire.
 	 */
 	wc.byte_len = tlen + sizeof(struct ib_grh);
diff --git a/drivers/infiniband/hw/qib/qib_user_sdma.c b/drivers/infiniband/hw/qib/qib_user_sdma.c
index 66208bcd7c1..82442085cbe 100644
--- a/drivers/infiniband/hw/qib/qib_user_sdma.c
+++ b/drivers/infiniband/hw/qib/qib_user_sdma.c
@@ -239,7 +239,7 @@ static int qib_user_sdma_num_pages(const struct iovec *iov)
 }
 
 /*
- * Truncate length to page boundry.
+ * Truncate length to page boundary.
  */
 static int qib_user_sdma_page_length(unsigned long addr, unsigned long len)
 {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index ab97f92fc25..7b6985a2e65 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -91,7 +91,6 @@ enum {
 	IPOIB_STOP_REAPER	  = 7,
 	IPOIB_FLAG_ADMIN_CM	  = 9,
 	IPOIB_FLAG_UMCAST	  = 10,
-	IPOIB_FLAG_CSUM		  = 11,
 
 	IPOIB_MAX_BACKOFF_SECONDS = 16,
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 93d55806b96..39913a065f9 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1463,8 +1463,7 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr,
 		set_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
 		ipoib_warn(priv, "enabling connected mode "
 			   "will cause multicast packet drops\n");
-
-		dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO);
+		netdev_update_features(dev);
 		rtnl_unlock();
 		priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM;
 
@@ -1474,13 +1473,7 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr,
 
 	if (!strcmp(buf, "datagram\n")) {
 		clear_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
-
-		if (test_bit(IPOIB_FLAG_CSUM, &priv->flags)) {
-			dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
-			priv->dev->features |= NETIF_F_GRO;
-			if (priv->hca_caps & IB_DEVICE_UD_TSO)
-				dev->features |= NETIF_F_TSO;
-		}
+		netdev_update_features(dev);
 		dev_set_mtu(dev, min(priv->mcast_mtu, dev->mtu));
 		rtnl_unlock();
 		ipoib_flush_paths(dev);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
index 19f7f5206f7..29bc7b5724a 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
@@ -42,32 +42,6 @@ static void ipoib_get_drvinfo(struct net_device *netdev,
 	strncpy(drvinfo->driver, "ipoib", sizeof(drvinfo->driver) - 1);
 }
 
-static u32 ipoib_get_rx_csum(struct net_device *dev)
-{
-	struct ipoib_dev_priv *priv = netdev_priv(dev);
-	return test_bit(IPOIB_FLAG_CSUM, &priv->flags) &&
-		!test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
-}
-
-static int ipoib_set_tso(struct net_device *dev, u32 data)
-{
-	struct ipoib_dev_priv *priv = netdev_priv(dev);
-
-	if (data) {
-		if (!test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags) &&
-		    (dev->features & NETIF_F_SG) &&
-		    (priv->hca_caps & IB_DEVICE_UD_TSO)) {
-			dev->features |= NETIF_F_TSO;
-		} else {
-			ipoib_warn(priv, "can't set TSO on\n");
-			return -EOPNOTSUPP;
-		}
-	} else
-		dev->features &= ~NETIF_F_TSO;
-
-	return 0;
-}
-
 static int ipoib_get_coalesce(struct net_device *dev,
 			      struct ethtool_coalesce *coal)
 {
@@ -108,8 +82,6 @@ static int ipoib_set_coalesce(struct net_device *dev,
 
 static const struct ethtool_ops ipoib_ethtool_ops = {
 	.get_drvinfo		= ipoib_get_drvinfo,
-	.get_rx_csum		= ipoib_get_rx_csum,
-	.set_tso		= ipoib_set_tso,
 	.get_coalesce		= ipoib_get_coalesce,
 	.set_coalesce		= ipoib_set_coalesce,
 };
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 806d0292dc3..81ae61d68a2 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -292,7 +292,7 @@ static void ipoib_ib_handle_rx_wc(struct net_device *dev, struct ib_wc *wc)
 	dev->stats.rx_bytes += skb->len;
 
 	skb->dev = dev;
-	if (test_bit(IPOIB_FLAG_CSUM, &priv->flags) && likely(wc->csum_ok))
+	if ((dev->features & NETIF_F_RXCSUM) && likely(wc->csum_ok))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	napi_gro_receive(&priv->napi, skb);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index aca3b44f7ae..86addca9ddf 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -171,6 +171,16 @@ static int ipoib_stop(struct net_device *dev)
 	return 0;
 }
 
+static u32 ipoib_fix_features(struct net_device *dev, u32 features)
+{
+	struct ipoib_dev_priv *priv = netdev_priv(dev);
+
+	if (test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags))
+		features &= ~(NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
+	return features;
+}
+
 static int ipoib_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -970,6 +980,7 @@ static const struct net_device_ops ipoib_netdev_ops = {
 	.ndo_open		 = ipoib_open,
 	.ndo_stop		 = ipoib_stop,
 	.ndo_change_mtu		 = ipoib_change_mtu,
+	.ndo_fix_features	 = ipoib_fix_features,
 	.ndo_start_xmit	 	 = ipoib_start_xmit,
 	.ndo_tx_timeout		 = ipoib_timeout,
 	.ndo_set_multicast_list	 = ipoib_set_mcast_list,
@@ -1154,19 +1165,18 @@ int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca)
 	kfree(device_attr);
 
 	if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) {
-		set_bit(IPOIB_FLAG_CSUM, &priv->flags);
-		priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
-	}
+		priv->dev->hw_features = NETIF_F_SG |
+			NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
 
-	priv->dev->features |= NETIF_F_GRO;
+		if (priv->hca_caps & IB_DEVICE_UD_TSO)
+			priv->dev->hw_features |= NETIF_F_TSO;
 
-	if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO)
-		priv->dev->features |= NETIF_F_TSO;
+		priv->dev->features |= priv->dev->hw_features;
+	}
 
 	return 0;
 }
 
-
 static struct net_device *ipoib_add_port(const char *format,
 					 struct ib_device *hca, u8 port)
 {
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h
index f1df01567bb..2f02ab0ccc1 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -91,7 +91,7 @@
 #define SIZE_4K	(1UL << SHIFT_4K)
 #define MASK_4K	(~(SIZE_4K-1))
 
-					/* support upto 512KB in one RDMA */
+					/* support up to 512KB in one RDMA */
 #define ISCSI_ISER_SG_TABLESIZE         (0x80000 >> SHIFT_4K)
 #define ISER_DEF_CMD_PER_LUN		128
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 7f42d3a454d..88d8e4cb419 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -39,13 +39,13 @@ struct evdev {
 };
 
 struct evdev_client {
-	int head;
-	int tail;
+	unsigned int head;
+	unsigned int tail;
 	spinlock_t buffer_lock; /* protects access to buffer, head and tail */
 	struct fasync_struct *fasync;
 	struct evdev *evdev;
 	struct list_head node;
-	int bufsize;
+	unsigned int bufsize;
 	struct input_event buffer[];
 };
 
@@ -55,16 +55,25 @@ static DEFINE_MUTEX(evdev_table_mutex);
 static void evdev_pass_event(struct evdev_client *client,
 			     struct input_event *event)
 {
-	/*
-	 * Interrupts are disabled, just acquire the lock.
-	 * Make sure we don't leave with the client buffer
-	 * "empty" by having client->head == client->tail.
-	 */
+	/* Interrupts are disabled, just acquire the lock. */
 	spin_lock(&client->buffer_lock);
-	do {
-		client->buffer[client->head++] = *event;
-		client->head &= client->bufsize - 1;
-	} while (client->head == client->tail);
+
+	client->buffer[client->head++] = *event;
+	client->head &= client->bufsize - 1;
+
+	if (unlikely(client->head == client->tail)) {
+		/*
+		 * This effectively "drops" all unconsumed events, leaving
+		 * EV_SYN/SYN_DROPPED plus the newest event in the queue.
+		 */
+		client->tail = (client->head - 2) & (client->bufsize - 1);
+
+		client->buffer[client->tail].time = event->time;
+		client->buffer[client->tail].type = EV_SYN;
+		client->buffer[client->tail].code = SYN_DROPPED;
+		client->buffer[client->tail].value = 0;
+	}
+
 	spin_unlock(&client->buffer_lock);
 
 	if (event->type == EV_SYN)
diff --git a/drivers/input/input.c b/drivers/input/input.c
index d6e8bd8a851..ebbceedc92f 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1746,6 +1746,42 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int
 }
 EXPORT_SYMBOL(input_set_capability);
 
+static unsigned int input_estimate_events_per_packet(struct input_dev *dev)
+{
+	int mt_slots;
+	int i;
+	unsigned int events;
+
+	if (dev->mtsize) {
+		mt_slots = dev->mtsize;
+	} else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) {
+		mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum -
+			   dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1,
+		clamp(mt_slots, 2, 32);
+	} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
+		mt_slots = 2;
+	} else {
+		mt_slots = 0;
+	}
+
+	events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */
+
+	for (i = 0; i < ABS_CNT; i++) {
+		if (test_bit(i, dev->absbit)) {
+			if (input_is_mt_axis(i))
+				events += mt_slots;
+			else
+				events++;
+		}
+	}
+
+	for (i = 0; i < REL_CNT; i++)
+		if (test_bit(i, dev->relbit))
+			events++;
+
+	return events;
+}
+
 #define INPUT_CLEANSE_BITMASK(dev, type, bits)				\
 	do {								\
 		if (!test_bit(EV_##type, dev->evbit))			\
@@ -1793,6 +1829,10 @@ int input_register_device(struct input_dev *dev)
 	/* Make sure that bitmasks not mentioned in dev->evbit are clean. */
 	input_cleanse_bitmasks(dev);
 
+	if (!dev->hint_events_per_packet)
+		dev->hint_events_per_packet =
+				input_estimate_events_per_packet(dev);
+
 	/*
 	 * If delay and period are pre-set by the driver, then autorepeating
 	 * is handled by the driver itself and we don't do it in input.c.
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 3182c9cd1b0..5688b5c88f2 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -758,7 +758,7 @@ static void joydev_remove_chrdev(struct joydev *joydev)
 }
 
 /*
- * Mark device non-existant. This disables writes, ioctls and
+ * Mark device non-existent. This disables writes, ioctls and
  * prevents new users from opening the device. Already posted
  * blocking reads will stay, however new ones will fail.
  */
@@ -777,7 +777,7 @@ static void joydev_cleanup(struct joydev *joydev)
 	joydev_hangup(joydev);
 	joydev_remove_chrdev(joydev);
 
-	/* joydev is marked dead so noone else accesses joydev->open */
+	/* joydev is marked dead so no one else accesses joydev->open */
 	if (joydev->open)
 		input_close_device(handle);
 }
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index d259b41354b..1639ab2b94b 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -3,7 +3,7 @@
  */
 
 /*
- * FP-Gaming Assasin 3D joystick driver for Linux
+ * FP-Gaming Assassin 3D joystick driver for Linux
  */
 
 /*
@@ -34,7 +34,7 @@
 #include <linux/input.h>
 #include <linux/jiffies.h>
 
-#define DRIVER_DESC	"FP-Gaming Assasin 3D joystick driver"
+#define DRIVER_DESC	"FP-Gaming Assassin 3D joystick driver"
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c
index 1839194ea98..10bcd4ae540 100644
--- a/drivers/input/keyboard/atakbd.c
+++ b/drivers/input/keyboard/atakbd.c
@@ -223,8 +223,9 @@ static int __init atakbd_init(void)
 		return -ENODEV;
 
 	// need to init core driver if not already done so
-	if (atari_keyb_init())
-		return -ENODEV;
+	error = atari_keyb_init();
+	if (error)
+		return error;
 
 	atakbd_dev = input_allocate_device();
 	if (!atakbd_dev)
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index a91ee941b5c..cd89d17162a 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -5,7 +5,7 @@
  *
  * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
  *
- * Intial Code: Sandeep Paulraj <s-paulraj@ti.com>
+ * Initial Code: Sandeep Paulraj <s-paulraj@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index bee03d64c45..d712dffd215 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -69,7 +69,7 @@ static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
 	u8 sts, val;
 
 	sts = readb(kbd->io_base + STATUS_REG);
-	if (sts & DATA_AVAIL)
+	if (!(sts & DATA_AVAIL))
 		return IRQ_NONE;
 
 	if (kbd->last_key != KEY_RESERVED) {
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 09bef79d9da..a26922cf0e8 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -332,18 +332,20 @@ static int __devinit twl4030_kp_program(struct twl4030_keypad *kp)
 static int __devinit twl4030_kp_probe(struct platform_device *pdev)
 {
 	struct twl4030_keypad_data *pdata = pdev->dev.platform_data;
-	const struct matrix_keymap_data *keymap_data = pdata->keymap_data;
+	const struct matrix_keymap_data *keymap_data;
 	struct twl4030_keypad *kp;
 	struct input_dev *input;
 	u8 reg;
 	int error;
 
-	if (!pdata || !pdata->rows || !pdata->cols ||
+	if (!pdata || !pdata->rows || !pdata->cols || !pdata->keymap_data ||
 	    pdata->rows > TWL4030_MAX_ROWS || pdata->cols > TWL4030_MAX_COLS) {
 		dev_err(&pdev->dev, "Invalid platform_data\n");
 		return -EINVAL;
 	}
 
+	keymap_data = pdata->keymap_data;
+
 	kp = kzalloc(sizeof(*kp), GFP_KERNEL);
 	input = input_allocate_device();
 	if (!kp || !input) {
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index de5900d5078..144ddbdeb9b 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -716,7 +716,7 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
 	pdata = dev->platform_data;
 	if (!pdata) {
 		dev_dbg(dev,
-			"No platfrom data: Using default initialization\n");
+			"No platform data: Using default initialization\n");
 		pdata = &adxl34x_default_init;
 	}
 
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index a93c525475c..fc62256c963 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -312,7 +312,7 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 			remote->data.tester = remote->data.tester >> 5;
 			remote->data.bits_left -= 5;
 		} else {
-			err("Bad message recieved, no stop bit found.\n");
+			err("Bad message received, no stop bit found.\n");
 		}
 
 		dev_dbg(&remote->udev->dev,
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 364bdf43a38..736056897e5 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -302,10 +302,14 @@ static int uinput_validate_absbits(struct input_dev *dev)
 	int retval = 0;
 
 	for (cnt = 0; cnt < ABS_CNT; cnt++) {
+		int min, max;
 		if (!test_bit(cnt, dev->absbit))
 			continue;
 
-		if (input_abs_get_max(dev, cnt) <= input_abs_get_min(dev, cnt)) {
+		min = input_abs_get_min(dev, cnt);
+		max = input_abs_get_max(dev, cnt);
+
+		if ((min != 0 || max != 0) && max <= min) {
 			printk(KERN_DEBUG
 				"%s: invalid abs[%02x] min:%d max:%d\n",
 				UINPUT_NAME, cnt,
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 12501de0c5c..52b41934898 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -274,7 +274,7 @@ static struct key_entry keymap_fs_amilo_pro_v3505[] __initdata = {
 	{ KE_BLUETOOTH, 0x30 },                      /* Fn+F10 */
 	{ KE_KEY,       0x31, {KEY_MAIL} },          /* mail button */
 	{ KE_KEY,       0x36, {KEY_WWW} },           /* www button */
-	{ KE_WIFI,      0x78 },                      /* satelite dish button */
+	{ KE_WIFI,      0x78 },                      /* satellite dish button */
 	{ KE_END,       0 }
 };
 
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 7077f9bf5ea..62bae99424e 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -303,7 +303,7 @@ static void xenkbd_backend_changed(struct xenbus_device *dev,
 				   enum xenbus_state backend_state)
 {
 	struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
-	int val;
+	int ret, val;
 
 	switch (backend_state) {
 	case XenbusStateInitialising:
@@ -316,6 +316,17 @@ static void xenkbd_backend_changed(struct xenbus_device *dev,
 
 	case XenbusStateInitWait:
 InitWait:
+		ret = xenbus_scanf(XBT_NIL, info->xbdev->otherend,
+				   "feature-abs-pointer", "%d", &val);
+		if (ret < 0)
+			val = 0;
+		if (val) {
+			ret = xenbus_printf(XBT_NIL, info->xbdev->nodename,
+					    "request-abs-pointer", "1");
+			if (ret)
+				pr_warning("xenkbd: can't request abs-pointer");
+		}
+
 		xenbus_switch_state(dev, XenbusStateConnected);
 		break;
 
diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c
index adf45b3040e..5c4a692bf73 100644
--- a/drivers/input/mouse/atarimouse.c
+++ b/drivers/input/mouse/atarimouse.c
@@ -77,15 +77,15 @@ static void atamouse_interrupt(char *buf)
 #endif
 
 	/* only relative events get here */
-	dx =  buf[1];
-	dy = -buf[2];
+	dx = buf[1];
+	dy = buf[2];
 
 	input_report_rel(atamouse_dev, REL_X, dx);
 	input_report_rel(atamouse_dev, REL_Y, dy);
 
-	input_report_key(atamouse_dev, BTN_LEFT,   buttons & 0x1);
+	input_report_key(atamouse_dev, BTN_LEFT,   buttons & 0x4);
 	input_report_key(atamouse_dev, BTN_MIDDLE, buttons & 0x2);
-	input_report_key(atamouse_dev, BTN_RIGHT,  buttons & 0x4);
+	input_report_key(atamouse_dev, BTN_RIGHT,  buttons & 0x1);
 
 	input_sync(atamouse_dev);
 
@@ -108,7 +108,7 @@ static int atamouse_open(struct input_dev *dev)
 static void atamouse_close(struct input_dev *dev)
 {
 	ikbd_mouse_disable();
-	atari_mouse_interrupt_hook = NULL;
+	atari_input_mouse_interrupt_hook = NULL;
 }
 
 static int __init atamouse_init(void)
@@ -118,8 +118,9 @@ static int __init atamouse_init(void)
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
 		return -ENODEV;
 
-	if (!atari_keyb_init())
-		return -ENODEV;
+	error = atari_keyb_init();
+	if (error)
+		return error;
 
 	atamouse_dev = input_allocate_device();
 	if (!atamouse_dev)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 3aead91bacc..3126983c004 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -639,7 +639,7 @@ exit:
  * device, resulting in trackpad malfunction under certain
  * circumstances. To get around this problem, there is at least one
  * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
- * recieve a reset_resume request rather than the normal resume.
+ * receive a reset_resume request rather than the normal resume.
  * Since the implementation of reset_resume is equal to mode switch
  * plus start_traffic, it seems easier to always do the switch when
  * starting traffic on the device.
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index aa186cf6c51..e06e045bf90 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -836,8 +836,8 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
 		},
 
 	},
-	{ }
 #endif
+	{ }
 };
 
 static bool broken_olpc_ec;
@@ -851,8 +851,8 @@ static const struct dmi_system_id __initconst olpc_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
 		},
 	},
-	{ }
 #endif
+	{ }
 };
 
 void __init synaptics_module_init(void)
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
index f6aa26d305e..cba3c84d2f2 100644
--- a/drivers/input/mouse/synaptics_i2c.c
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -462,7 +462,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work)
 	 * While interrupt driven, there is no real need to poll the device.
 	 * But touchpads are very sensitive, so there could be errors
 	 * related to physical environment and the attention line isn't
-	 * neccesarily asserted. In such case we can lose the touchpad.
+	 * necessarily asserted. In such case we can lose the touchpad.
 	 * We poll the device once in THREAD_IRQ_SLEEP_SECS and
 	 * if error is detected, we try to reset and reconfigure the touchpad.
 	 */
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index bf2c0c80d6c..eb9a3cfbeef 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -334,7 +334,7 @@ static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
 	 * M: manufacturer location code
 	 * R: revision code
 	 * E: Error code. If it's in the range of 0x00..0x1f, only some
-	 *    minor problem occured. Errors >= 0x20 are considered bad
+	 *    minor problem occurred. Errors >= 0x20 are considered bad
 	 *    and the device may not work properly...
 	 * D: <0010> == mouse, <0100> == tablet
 	 */
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 8c0b51c3142..42206205e4f 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d)
 	INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
 
 	ret = hp_sdc_init();
-	/* after successfull initialization give SDC some time to settle
+	/* after successful initialization give SDC some time to settle
 	 * and then load the hp_sdc_mlc upper layer driver */
 	if (!ret)
 		schedule_delayed_work(&moduleloader_work,
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index ac4c93689ab..d37a48e099d 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -869,15 +869,15 @@ static int i8042_controller_selftest(void)
 	do {
 
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			pr_err("i8042 controller self test timeout\n");
+			pr_err("i8042 controller selftest timeout\n");
 			return -ENODEV;
 		}
 
 		if (param == I8042_RET_CTL_TEST)
 			return 0;
 
-		pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
-		       param, I8042_RET_CTL_TEST);
+		dbg("i8042 controller selftest: %#x != %#x\n",
+		    param, I8042_RET_CTL_TEST);
 		msleep(50);
 	} while (i++ < 5);
 
@@ -891,6 +891,7 @@ static int i8042_controller_selftest(void)
 	pr_info("giving up on controller selftest, continuing anyway...\n");
 	return 0;
 #else
+	pr_err("i8042 controller selftest failed\n");
 	return -EIO;
 #endif
 }
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 9da6fbcaaa7..7ec3c97dc1b 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -90,7 +90,7 @@ static int rpckbd_open(struct serio *port)
 
 	if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) {
 		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
-		free_irq(IRQ_KEYBOARDRX, NULL);
+		free_irq(IRQ_KEYBOARDRX, port);
 		return -EBUSY;
 	}
 
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 7540bafc95c..80baa53da5b 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -225,7 +225,7 @@ static void sxps2_close(struct serio *pserio)
 /**
  * xps2_of_probe - probe method for the PS/2 device.
  * @of_dev:	pointer to OF device structure
- * @match:	pointer to the stucture used for matching a device
+ * @match:	pointer to the structure used for matching a device
  *
  * This function probes the PS/2 device in the device tree.
  * It initializes the driver data structure and the hardware.
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index 337bf51bc98..fdb6a3976f9 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -208,6 +208,12 @@ int sparse_keymap_setup(struct input_dev *dev,
 		}
 	}
 
+	if (test_bit(EV_KEY, dev->evbit)) {
+		__set_bit(KEY_UNKNOWN, dev->keybit);
+		__set_bit(EV_MSC, dev->evbit);
+		__set_bit(MSC_SCAN, dev->mscbit);
+	}
+
 	dev->keycode = map;
 	dev->keycodemax = map_size;
 	dev->getkeycode = sparse_keymap_getkeycode;
@@ -268,6 +274,7 @@ void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *k
 {
 	switch (ke->type) {
 	case KE_KEY:
+		input_event(dev, EV_MSC, MSC_SCAN, ke->code);
 		input_report_key(dev, ke->keycode, value);
 		input_sync(dev);
 		if (value && autorelease) {
@@ -305,12 +312,19 @@ bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
 {
 	const struct key_entry *ke =
 		sparse_keymap_entry_from_scancode(dev, code);
+	struct key_entry unknown_ke;
 
 	if (ke) {
 		sparse_keymap_report_entry(dev, ke, value, autorelease);
 		return true;
 	}
 
+	/* Report an unknown key event as a debugging aid */
+	unknown_ke.type = KE_KEY;
+	unknown_ke.code = code;
+	unknown_ke.keycode = KEY_UNKNOWN;
+	sparse_keymap_report_entry(dev, &unknown_ke, value, true);
+
 	return false;
 }
 EXPORT_SYMBOL(sparse_keymap_report_event);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 5597637cfd4..08ba5ad9c9b 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -16,6 +16,14 @@
 #include "wacom.h"
 #include <linux/input/mt.h>
 
+/* resolution for penabled devices */
+#define WACOM_PL_RES		20
+#define WACOM_PENPRTN_RES	40
+#define WACOM_VOLITO_RES	50
+#define WACOM_GRAPHIRE_RES	80
+#define WACOM_INTUOS_RES	100
+#define WACOM_INTUOS3_RES	200
+
 static int wacom_penpartner_irq(struct wacom_wac *wacom)
 {
 	unsigned char *data = wacom->data;
@@ -1055,6 +1063,19 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
 			     features->pressure_fuzz, 0);
 
+	if (features->device_type == BTN_TOOL_PEN) {
+		/* penabled devices have fixed resolution for each model */
+		input_abs_set_res(input_dev, ABS_X, features->x_resolution);
+		input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
+	} else {
+		input_abs_set_res(input_dev, ABS_X,
+			wacom_calculate_touch_res(features->x_max,
+						features->x_phy));
+		input_abs_set_res(input_dev, ABS_Y,
+			wacom_calculate_touch_res(features->y_max,
+						features->y_phy));
+	}
+
 	__set_bit(ABS_MISC, input_dev->absbit);
 
 	switch (wacom_wac->features.type) {
@@ -1171,15 +1192,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	case TABLETPC:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
-		if (features->device_type != BTN_TOOL_PEN) {
-			input_abs_set_res(input_dev, ABS_X,
-				wacom_calculate_touch_res(features->x_max,
-							features->x_phy));
-			input_abs_set_res(input_dev, ABS_Y,
-				wacom_calculate_touch_res(features->y_max,
-							features->y_phy));
+		if (features->device_type != BTN_TOOL_PEN)
 			break;  /* no need to process stylus stuff */
-		}
+
 		/* fall through */
 
 	case PL:
@@ -1216,12 +1231,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			input_set_abs_params(input_dev, ABS_MT_PRESSURE,
 					     0, features->pressure_max,
 					     features->pressure_fuzz, 0);
-			input_abs_set_res(input_dev, ABS_X,
-				wacom_calculate_touch_res(features->x_max,
-							features->x_phy));
-			input_abs_set_res(input_dev, ABS_Y,
-				wacom_calculate_touch_res(features->y_max,
-							features->y_phy));
 		} else if (features->device_type == BTN_TOOL_PEN) {
 			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
@@ -1233,161 +1242,242 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 }
 
 static const struct wacom_features wacom_features_0x00 =
-	{ "Wacom Penpartner",     WACOM_PKGLEN_PENPRTN,    5040,  3780,  255,  0, PENPARTNER };
+	{ "Wacom Penpartner",     WACOM_PKGLEN_PENPRTN,    5040,  3780,  255,
+	  0, PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
 static const struct wacom_features wacom_features_0x10 =
-	{ "Wacom Graphire",       WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire",       WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x11 =
-	{ "Wacom Graphire2 4x5",  WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire2 4x5",  WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x12 =
-	{ "Wacom Graphire2 5x7",  WACOM_PKGLEN_GRAPHIRE,  13918, 10206,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire2 5x7",  WACOM_PKGLEN_GRAPHIRE,  13918, 10206,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x13 =
-	{ "Wacom Graphire3",      WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire3",      WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x14 =
-	{ "Wacom Graphire3 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, GRAPHIRE };
+	{ "Wacom Graphire3 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x15 =
-	{ "Wacom Graphire4 4x5",  WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511, 63, WACOM_G4 };
+	{ "Wacom Graphire4 4x5",  WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511,
+	  63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x16 =
-	{ "Wacom Graphire4 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, WACOM_G4 };
+	{ "Wacom Graphire4 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
+	  63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x17 =
-	{ "Wacom BambooFun 4x5",  WACOM_PKGLEN_BBFUN,     14760,  9225,  511, 63, WACOM_MO };
+	{ "Wacom BambooFun 4x5",  WACOM_PKGLEN_BBFUN,     14760,  9225,  511,
+	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x18 =
-	{ "Wacom BambooFun 6x8",  WACOM_PKGLEN_BBFUN,     21648, 13530,  511, 63, WACOM_MO };
+	{ "Wacom BambooFun 6x8",  WACOM_PKGLEN_BBFUN,     21648, 13530,  511,
+	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x19 =
-	{ "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, GRAPHIRE };
+	{ "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
+	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x60 =
-	{ "Wacom Volito",         WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+	{ "Wacom Volito",         WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x61 =
-	{ "Wacom PenStation2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  255, 63, GRAPHIRE };
+	{ "Wacom PenStation2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  255,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x62 =
-	{ "Wacom Volito2 4x5",    WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+	{ "Wacom Volito2 4x5",    WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x63 =
-	{ "Wacom Volito2 2x3",    WACOM_PKGLEN_GRAPHIRE,   3248,  2320,  511, 63, GRAPHIRE };
+	{ "Wacom Volito2 2x3",    WACOM_PKGLEN_GRAPHIRE,   3248,  2320,  511,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x64 =
-	{ "Wacom PenPartner2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  511, 63, GRAPHIRE };
+	{ "Wacom PenPartner2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  511,
+	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
 static const struct wacom_features wacom_features_0x65 =
-	{ "Wacom Bamboo",         WACOM_PKGLEN_BBFUN,     14760,  9225,  511, 63, WACOM_MO };
+	{ "Wacom Bamboo",         WACOM_PKGLEN_BBFUN,     14760,  9225,  511,
+	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x69 =
-	{ "Wacom Bamboo1",        WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+	{ "Wacom Bamboo1",        WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
+	  63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
 static const struct wacom_features wacom_features_0x20 =
-	{ "Wacom Intuos 4x5",     WACOM_PKGLEN_INTUOS,    12700, 10600, 1023, 31, INTUOS };
+	{ "Wacom Intuos 4x5",     WACOM_PKGLEN_INTUOS,    12700, 10600, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x21 =
-	{ "Wacom Intuos 6x8",     WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
+	{ "Wacom Intuos 6x8",     WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x22 =
-	{ "Wacom Intuos 9x12",    WACOM_PKGLEN_INTUOS,    30480, 24060, 1023, 31, INTUOS };
+	{ "Wacom Intuos 9x12",    WACOM_PKGLEN_INTUOS,    30480, 24060, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x23 =
-	{ "Wacom Intuos 12x12",   WACOM_PKGLEN_INTUOS,    30480, 31680, 1023, 31, INTUOS };
+	{ "Wacom Intuos 12x12",   WACOM_PKGLEN_INTUOS,    30480, 31680, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x24 =
-	{ "Wacom Intuos 12x18",   WACOM_PKGLEN_INTUOS,    45720, 31680, 1023, 31, INTUOS };
+	{ "Wacom Intuos 12x18",   WACOM_PKGLEN_INTUOS,    45720, 31680, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x30 =
-	{ "Wacom PL400",          WACOM_PKGLEN_GRAPHIRE,   5408,  4056,  255,  0, PL };
+	{ "Wacom PL400",          WACOM_PKGLEN_GRAPHIRE,   5408,  4056,  255,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x31 =
-	{ "Wacom PL500",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  255,  0, PL };
+	{ "Wacom PL500",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  255,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x32 =
-	{ "Wacom PL600",          WACOM_PKGLEN_GRAPHIRE,   6126,  4604,  255,  0, PL };
+	{ "Wacom PL600",          WACOM_PKGLEN_GRAPHIRE,   6126,  4604,  255,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x33 =
-	{ "Wacom PL600SX",        WACOM_PKGLEN_GRAPHIRE,   6260,  5016,  255,  0, PL };
+	{ "Wacom PL600SX",        WACOM_PKGLEN_GRAPHIRE,   6260,  5016,  255,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x34 =
-	{ "Wacom PL550",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  511,  0, PL };
+	{ "Wacom PL550",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x35 =
-	{ "Wacom PL800",          WACOM_PKGLEN_GRAPHIRE,   7220,  5780,  511,  0, PL };
+	{ "Wacom PL800",          WACOM_PKGLEN_GRAPHIRE,   7220,  5780,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x37 =
-	{ "Wacom PL700",          WACOM_PKGLEN_GRAPHIRE,   6758,  5406,  511,  0, PL };
+	{ "Wacom PL700",          WACOM_PKGLEN_GRAPHIRE,   6758,  5406,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x38 =
-	{ "Wacom PL510",          WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,  0, PL };
+	{ "Wacom PL510",          WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x39 =
-	{ "Wacom DTU710",         WACOM_PKGLEN_GRAPHIRE,  34080, 27660,  511,  0, PL };
+	{ "Wacom DTU710",         WACOM_PKGLEN_GRAPHIRE,  34080, 27660,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0xC4 =
-	{ "Wacom DTF521",         WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,  0, PL };
+	{ "Wacom DTF521",         WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0xC0 =
-	{ "Wacom DTF720",         WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,  0, PL };
+	{ "Wacom DTF720",         WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0xC2 =
-	{ "Wacom DTF720a",        WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,  0, PL };
+	{ "Wacom DTF720a",        WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,
+	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x03 =
-	{ "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE,  20480, 15360,  511,  0, PTU };
+	{ "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE,  20480, 15360,  511,
+	  0, PTU, WACOM_PL_RES, WACOM_PL_RES };
 static const struct wacom_features wacom_features_0x41 =
-	{ "Wacom Intuos2 4x5",    WACOM_PKGLEN_INTUOS,    12700, 10600, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 4x5",    WACOM_PKGLEN_INTUOS,    12700, 10600, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x42 =
-	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x43 =
-	{ "Wacom Intuos2 9x12",   WACOM_PKGLEN_INTUOS,    30480, 24060, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 9x12",   WACOM_PKGLEN_INTUOS,    30480, 24060, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x44 =
-	{ "Wacom Intuos2 12x12",  WACOM_PKGLEN_INTUOS,    30480, 31680, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 12x12",  WACOM_PKGLEN_INTUOS,    30480, 31680, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x45 =
-	{ "Wacom Intuos2 12x18",  WACOM_PKGLEN_INTUOS,    45720, 31680, 1023, 31, INTUOS };
+	{ "Wacom Intuos2 12x18",  WACOM_PKGLEN_INTUOS,    45720, 31680, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xB0 =
-	{ "Wacom Intuos3 4x5",    WACOM_PKGLEN_INTUOS,    25400, 20320, 1023, 63, INTUOS3S };
+	{ "Wacom Intuos3 4x5",    WACOM_PKGLEN_INTUOS,    25400, 20320, 1023,
+	  63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB1 =
-	{ "Wacom Intuos3 6x8",    WACOM_PKGLEN_INTUOS,    40640, 30480, 1023, 63, INTUOS3 };
+	{ "Wacom Intuos3 6x8",    WACOM_PKGLEN_INTUOS,    40640, 30480, 1023,
+	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB2 =
-	{ "Wacom Intuos3 9x12",   WACOM_PKGLEN_INTUOS,    60960, 45720, 1023, 63, INTUOS3 };
+	{ "Wacom Intuos3 9x12",   WACOM_PKGLEN_INTUOS,    60960, 45720, 1023,
+	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB3 =
-	{ "Wacom Intuos3 12x12",  WACOM_PKGLEN_INTUOS,    60960, 60960, 1023, 63, INTUOS3L };
+	{ "Wacom Intuos3 12x12",  WACOM_PKGLEN_INTUOS,    60960, 60960, 1023,
+	  63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB4 =
-	{ "Wacom Intuos3 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 1023, 63, INTUOS3L };
+	{ "Wacom Intuos3 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 1023,
+	  63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB5 =
-	{ "Wacom Intuos3 6x11",   WACOM_PKGLEN_INTUOS,    54204, 31750, 1023, 63, INTUOS3 };
+	{ "Wacom Intuos3 6x11",   WACOM_PKGLEN_INTUOS,    54204, 31750, 1023,
+	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB7 =
-	{ "Wacom Intuos3 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 1023, 63, INTUOS3S };
+	{ "Wacom Intuos3 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 1023,
+	  63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB8 =
-	{ "Wacom Intuos4 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 2047, 63, INTUOS4S };
+	{ "Wacom Intuos4 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 2047,
+	  63, INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xB9 =
-	{ "Wacom Intuos4 6x9",    WACOM_PKGLEN_INTUOS,    44704, 27940, 2047, 63, INTUOS4 };
+	{ "Wacom Intuos4 6x9",    WACOM_PKGLEN_INTUOS,    44704, 27940, 2047,
+	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xBA =
-	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047, 63, INTUOS4L };
+	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047,
+	  63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xBB =
-	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047, 63, INTUOS4L };
+	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047,
+	  63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xBC =
-	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047, 63, INTUOS4 };
+	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047,
+	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0x3F =
-	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023, 63, CINTIQ };
+	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023,
+	  63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xC5 =
-	{ "Wacom Cintiq 20WSX",   WACOM_PKGLEN_INTUOS,    86680, 54180, 1023, 63, WACOM_BEE };
+	{ "Wacom Cintiq 20WSX",   WACOM_PKGLEN_INTUOS,    86680, 54180, 1023,
+	  63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xC6 =
-	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023, 63, WACOM_BEE };
+	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023,
+	  63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xC7 =
-	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,  0, PL };
+	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,
+	  0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xCE =
-	{ "Wacom DTU2231",        WACOM_PKGLEN_GRAPHIRE,  47864, 27011,  511,  0, DTU };
+	{ "Wacom DTU2231",        WACOM_PKGLEN_GRAPHIRE,  47864, 27011,  511,
+	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xF0 =
-	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,  0, DTU };
+	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,
+	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xCC =
-	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047, 63, WACOM_21UX2 };
+	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047,
+	  63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0x90 =
-	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x93 =
-	{ "Wacom ISDv4 93",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 93",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x9A =
-	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x9F =
-	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xE2 =
-	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
+	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xE3 =
-	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
+	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xE6 =
+	{ "Wacom ISDv4 E6",       WACOM_PKGLEN_TPC2FG,    27760, 15694,  255,
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x47 =
-	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
-static struct wacom_features wacom_features_0xD0 =
-	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD1 =
-	{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD2 =
-	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD3 =
-	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023, 63, BAMBOO_PT };
+	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
+	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xD0 =
+	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xD1 =
+	{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xD2 =
+	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xD3 =
+	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD4 =
-	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200,  255, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD6 =
-	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD7 =
-	{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720,  9200, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xD8 =
-	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023, 63, BAMBOO_PT };
-static struct wacom_features wacom_features_0xDA =
-	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200,  255,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xD6 =
+	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xD7 =
+	{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xD8 =
+	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xDA =
+	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static struct wacom_features wacom_features_0xDB =
-	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13530, 1023, 63, BAMBOO_PT };
+	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13530, 1023,
+	  63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x6004 =
-	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800, 8000, 255, 0, TABLETPC };
+	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
+	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 
 #define USB_DEVICE_WACOM(prod)					\
 	USB_DEVICE(USB_VENDOR_ID_WACOM, prod),			\
@@ -1474,6 +1564,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x9F) },
 	{ USB_DEVICE_WACOM(0xE2) },
 	{ USB_DEVICE_WACOM(0xE3) },
+	{ USB_DEVICE_WACOM(0xE6) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_LENOVO(0x6004) },
 	{ }
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 835f756b150..53eb71b6833 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -74,6 +74,8 @@ struct wacom_features {
 	int pressure_max;
 	int distance_max;
 	int type;
+	int x_resolution;
+	int y_resolution;
 	int device_type;
 	int x_phy;
 	int y_phy;
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index c24946f5125..1de1c19dad3 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -281,17 +281,24 @@ struct ser_req {
 	u8			command;
 	u8			ref_off;
 	u16			scratch;
-	__be16			sample;
 	struct spi_message	msg;
 	struct spi_transfer	xfer[6];
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	__be16 sample ____cacheline_aligned;
 };
 
 struct ads7845_ser_req {
 	u8			command[3];
-	u8			pwrdown[3];
-	u8			sample[3];
 	struct spi_message	msg;
 	struct spi_transfer	xfer[2];
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	u8 sample[3] ____cacheline_aligned;
 };
 
 static int ads7846_read12_ser(struct device *dev, unsigned command)
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index b4d7f63deff..45f93d0f559 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -62,7 +62,7 @@ MODULE_LICENSE("GPL");
         Programmer has no control over these numbers.
         TODO there are holes - specifically  1,7,0x0a
 */
-#define VERSION_ID              0       /* Get Version (request/respose) */
+#define VERSION_ID              0       /* Get Version (request/response) */
 #define KEYBD_ID                2       /* Keyboard (event) */
 #define TOUCHS_ID               3       /* Touch Screen (event)*/
 #define EEPROM_READ_ID          4       /* (request/response) */
@@ -399,31 +399,34 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv)
 			IRQF_SHARED | IRQF_DISABLED, "h3600_action", &ts->dev)) {
 		printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
 		err = -EBUSY;
-		goto fail2;
+		goto fail1;
 	}
 
 	if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
 			IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", &ts->dev)) {
 		printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
 		err = -EBUSY;
-		goto fail3;
+		goto fail2;
 	}
 
 	serio_set_drvdata(serio, ts);
 
 	err = serio_open(serio, drv);
 	if (err)
-		return err;
+		goto fail3;
 
 	//h3600_flite_control(1, 25);     /* default brightness */
-	input_register_device(ts->dev);
+	err = input_register_device(ts->dev);
+	if (err)
+		goto fail4;
 
 	return 0;
 
-fail3:	free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
+fail4:	serio_close(serio);
+fail3:	serio_set_drvdata(serio, NULL);
+	free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
 fail2:	free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev);
-fail1:	serio_set_drvdata(serio, NULL);
-	input_free_device(input_dev);
+fail1:	input_free_device(input_dev);
 	kfree(ts);
 	return err;
 }
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index c0307b22d86..66c96bfc552 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -542,7 +542,7 @@ static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev)
 	 * ADC power on, start, enable PENDET and set loop delay
 	 * ADC loop delay is set to 4.5 ms approximately
 	 * Loop delay more than this results in jitter in adc readings
-	 * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET
+	 * Setting loop delay to 0 (continuous loop) in MAXIM stops PENDET
 	 * interrupt generation sometimes.
 	 */
 
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 028a5363eea..3b5b5df04dd 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -6,7 +6,7 @@
  *  Copyright:	MontaVista Software, Inc.
  *
  * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
  * dont bother Nicolas please ;-)
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
index 6ae054f8e0a..9175d49d254 100644
--- a/drivers/input/touchscreen/wm831x-ts.c
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -68,8 +68,23 @@ struct wm831x_ts {
 	unsigned int pd_irq;
 	bool pressure;
 	bool pen_down;
+	struct work_struct pd_data_work;
 };
 
+static void wm831x_pd_data_work(struct work_struct *work)
+{
+	struct wm831x_ts *wm831x_ts =
+		container_of(work, struct wm831x_ts, pd_data_work);
+
+	if (wm831x_ts->pen_down) {
+		enable_irq(wm831x_ts->data_irq);
+		dev_dbg(wm831x_ts->wm831x->dev, "IRQ PD->DATA done\n");
+	} else {
+		enable_irq(wm831x_ts->pd_irq);
+		dev_dbg(wm831x_ts->wm831x->dev, "IRQ DATA->PD done\n");
+	}
+}
+
 static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
 {
 	struct wm831x_ts *wm831x_ts = irq_data;
@@ -110,6 +125,9 @@ static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
 	}
 
 	if (!wm831x_ts->pen_down) {
+		/* Switch from data to pen down */
+		dev_dbg(wm831x->dev, "IRQ DATA->PD\n");
+
 		disable_irq_nosync(wm831x_ts->data_irq);
 
 		/* Don't need data any more */
@@ -128,6 +146,10 @@ static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
 					 ABS_PRESSURE, 0);
 
 		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0);
+
+		schedule_work(&wm831x_ts->pd_data_work);
+	} else {
+		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
 	}
 
 	input_sync(wm831x_ts->input_dev);
@@ -141,6 +163,11 @@ static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data)
 	struct wm831x *wm831x = wm831x_ts->wm831x;
 	int ena = 0;
 
+	if (wm831x_ts->pen_down)
+		return IRQ_HANDLED;
+
+	disable_irq_nosync(wm831x_ts->pd_irq);
+
 	/* Start collecting data */
 	if (wm831x_ts->pressure)
 		ena |= WM831X_TCH_Z_ENA;
@@ -149,14 +176,14 @@ static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data)
 			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA,
 			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | ena);
 
-	input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
-	input_sync(wm831x_ts->input_dev);
-
 	wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
 			WM831X_TCHPD_EINT, WM831X_TCHPD_EINT);
 
 	wm831x_ts->pen_down = true;
-	enable_irq(wm831x_ts->data_irq);
+
+	/* Switch from pen down to data */
+	dev_dbg(wm831x->dev, "IRQ PD->DATA\n");
+	schedule_work(&wm831x_ts->pd_data_work);
 
 	return IRQ_HANDLED;
 }
@@ -182,13 +209,28 @@ static void wm831x_ts_input_close(struct input_dev *idev)
 	struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
 	struct wm831x *wm831x = wm831x_ts->wm831x;
 
+	/* Shut the controller down, disabling all other functionality too */
 	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
-			WM831X_TCH_ENA | WM831X_TCH_CVT_ENA |
-			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
-			WM831X_TCH_Z_ENA, 0);
+			WM831X_TCH_ENA | WM831X_TCH_X_ENA |
+			WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, 0);
 
-	if (wm831x_ts->pen_down)
+	/* Make sure any pending IRQs are done, the above will prevent
+	 * new ones firing.
+	 */
+	synchronize_irq(wm831x_ts->data_irq);
+	synchronize_irq(wm831x_ts->pd_irq);
+
+	/* Make sure the IRQ completion work is quiesced */
+	flush_work_sync(&wm831x_ts->pd_data_work);
+
+	/* If we ended up with the pen down then make sure we revert back
+	 * to pen detection state for the next time we start up.
+	 */
+	if (wm831x_ts->pen_down) {
 		disable_irq(wm831x_ts->data_irq);
+		enable_irq(wm831x_ts->pd_irq);
+		wm831x_ts->pen_down = false;
+	}
 }
 
 static __devinit int wm831x_ts_probe(struct platform_device *pdev)
@@ -198,7 +240,7 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev)
 	struct wm831x_pdata *core_pdata = dev_get_platdata(pdev->dev.parent);
 	struct wm831x_touch_pdata *pdata = NULL;
 	struct input_dev *input_dev;
-	int error;
+	int error, irqf;
 
 	if (core_pdata)
 		pdata = core_pdata->touch;
@@ -212,6 +254,7 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev)
 
 	wm831x_ts->wm831x = wm831x;
 	wm831x_ts->input_dev = input_dev;
+	INIT_WORK(&wm831x_ts->pd_data_work, wm831x_pd_data_work);
 
 	/*
 	 * If we have a direct IRQ use it, otherwise use the interrupt
@@ -270,9 +313,14 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev)
 	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
 			WM831X_TCH_RATE_MASK, 6);
 
+	if (pdata && pdata->data_irqf)
+		irqf = pdata->data_irqf;
+	else
+		irqf = IRQF_TRIGGER_HIGH;
+
 	error = request_threaded_irq(wm831x_ts->data_irq,
 				     NULL, wm831x_ts_data_irq,
-				     IRQF_ONESHOT,
+				     irqf | IRQF_ONESHOT,
 				     "Touchscreen data", wm831x_ts);
 	if (error) {
 		dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n",
@@ -281,9 +329,14 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev)
 	}
 	disable_irq(wm831x_ts->data_irq);
 
+	if (pdata && pdata->pd_irqf)
+		irqf = pdata->pd_irqf;
+	else
+		irqf = IRQF_TRIGGER_HIGH;
+
 	error = request_threaded_irq(wm831x_ts->pd_irq,
 				     NULL, wm831x_ts_pen_down_irq,
-				     IRQF_ONESHOT,
+				     irqf | IRQF_ONESHOT,
 				     "Touchscreen pen down", wm831x_ts);
 	if (error) {
 		dev_err(&pdev->dev, "Failed to request pen down IRQ %d: %d\n",
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 6b5be742c27..98e61175d3f 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -306,7 +306,7 @@ static int wm9705_acc_enable(struct wm97xx *wm, int enable)
 	dig2 = wm->dig[2];
 
 	if (enable) {
-		/* continous mode */
+		/* continuous mode */
 		if (wm->mach_ops->acc_startup &&
 		    (ret = wm->mach_ops->acc_startup(wm)) < 0)
 			return ret;
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 7490b05c356..2bc2fb80100 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -419,7 +419,7 @@ static int wm9712_acc_enable(struct wm97xx *wm, int enable)
 	dig2 = wm->dig[2];
 
 	if (enable) {
-		/* continous mode */
+		/* continuous mode */
 		if (wm->mach_ops->acc_startup) {
 			ret = wm->mach_ops->acc_startup(wm);
 			if (ret < 0)
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 238b5132712..73ec99568f1 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -431,7 +431,7 @@ static int wm9713_acc_enable(struct wm97xx *wm, int enable)
 	dig3 = wm->dig[2];
 
 	if (enable) {
-		/* continous mode */
+		/* continuous mode */
 		if (wm->mach_ops->acc_startup &&
 			(ret = wm->mach_ops->acc_startup(wm)) < 0)
 			return ret;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 6b75c9f660a..5dbe73af2f8 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -335,7 +335,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
 	 */
 	if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) {
 		if (wm->pen_is_down && !pen_was_down) {
-			/* Data is not availiable immediately on pen down */
+			/* Data is not available immediately on pen down */
 			queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1);
 		}
 
@@ -354,7 +354,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
  * Codec PENDOWN irq handler
  *
  * We have to disable the codec interrupt in the handler because it
- * can take upto 1ms to clear the interrupt source. We schedule a task
+ * can take up to 1ms to clear the interrupt source. We schedule a task
  * in a work queue to do the actual interaction with the chip.  The
  * interrupt is then enabled again in the slow handler when the source
  * has been cleared.
diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig
index a168e8a891b..15c3ffd9d86 100644
--- a/drivers/isdn/capi/Kconfig
+++ b/drivers/isdn/capi/Kconfig
@@ -33,21 +33,6 @@ config ISDN_CAPI_CAPI20
 	  standardized libcapi20 to access this functionality.  You should say
 	  Y/M here.
 
-config ISDN_CAPI_CAPIFS_BOOL
-	bool "CAPI2.0 filesystem support (DEPRECATED)"
-	depends on ISDN_CAPI_MIDDLEWARE && ISDN_CAPI_CAPI20
-	help
-	  This option provides a special file system, similar to /dev/pts with
-	  device nodes for the special ttys established by using the
-	  middleware extension above.
-	  You no longer need this, udev fully replaces it. This feature is
-	  scheduled for removal.
-
-config ISDN_CAPI_CAPIFS
-	tristate
-	depends on ISDN_CAPI_CAPIFS_BOOL
-	default ISDN_CAPI_CAPI20
-
 config ISDN_CAPI_CAPIDRV
 	tristate "CAPI2.0 capidrv interface support"
 	depends on ISDN_I4L
diff --git a/drivers/isdn/capi/Makefile b/drivers/isdn/capi/Makefile
index 57123e3e497..4d5b4b71db1 100644
--- a/drivers/isdn/capi/Makefile
+++ b/drivers/isdn/capi/Makefile
@@ -7,7 +7,6 @@
 obj-$(CONFIG_ISDN_CAPI)			+= kernelcapi.o
 obj-$(CONFIG_ISDN_CAPI_CAPI20)		+= capi.o 
 obj-$(CONFIG_ISDN_CAPI_CAPIDRV)		+= capidrv.o
-obj-$(CONFIG_ISDN_CAPI_CAPIFS)		+= capifs.o
 
 # Multipart objects.
 
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 0d708836703..e44933d5879 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -38,15 +38,10 @@
 #include <linux/isdn/capiutil.h>
 #include <linux/isdn/capicmd.h>
 
-#include "capifs.h"
-
 MODULE_DESCRIPTION("CAPI4Linux: Userspace /dev/capi20 interface");
 MODULE_AUTHOR("Carsten Paeth");
 MODULE_LICENSE("GPL");
 
-#undef _DEBUG_TTYFUNCS		/* call to tty_driver */
-#undef _DEBUG_DATAFLOW		/* data flow */
-
 /* -------- driver information -------------------------------------- */
 
 static DEFINE_MUTEX(capi_mutex);
@@ -85,7 +80,6 @@ struct capiminor {
 	struct kref kref;
 
 	unsigned int      minor;
-	struct dentry *capifs_dentry;
 
 	struct capi20_appl	*ap;
 	u32			ncci;
@@ -300,17 +294,8 @@ static void capiminor_free(struct capiminor *mp)
 
 static void capincci_alloc_minor(struct capidev *cdev, struct capincci *np)
 {
-	struct capiminor *mp;
-	dev_t device;
-
-	if (!(cdev->userflags & CAPIFLAG_HIGHJACKING))
-		return;
-
-	mp = np->minorp = capiminor_alloc(&cdev->ap, np->ncci);
-	if (mp) {
-		device = MKDEV(capinc_tty_driver->major, mp->minor);
-		mp->capifs_dentry = capifs_new_ncci(mp->minor, device);
-	}
+	if (cdev->userflags & CAPIFLAG_HIGHJACKING)
+		np->minorp = capiminor_alloc(&cdev->ap, np->ncci);
 }
 
 static void capincci_free_minor(struct capincci *np)
@@ -319,8 +304,6 @@ static void capincci_free_minor(struct capincci *np)
 	struct tty_struct *tty;
 
 	if (mp) {
-		capifs_free_ncci(mp->capifs_dentry);
-
 		tty = tty_port_tty_get(&mp->port);
 		if (tty) {
 			tty_vhangup(tty);
@@ -432,9 +415,7 @@ static int handle_recv_skb(struct capiminor *mp, struct sk_buff *skb)
 
 	tty = tty_port_tty_get(&mp->port);
 	if (!tty) {
-#ifdef _DEBUG_DATAFLOW
-		printk(KERN_DEBUG "capi: currently no receiver\n");
-#endif
+		pr_debug("capi: currently no receiver\n");
 		return -1;
 	}
 	
@@ -447,23 +428,17 @@ static int handle_recv_skb(struct capiminor *mp, struct sk_buff *skb)
 	}
 
 	if (ld->ops->receive_buf == NULL) {
-#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
-		printk(KERN_DEBUG "capi: ldisc has no receive_buf function\n");
-#endif
+		pr_debug("capi: ldisc has no receive_buf function\n");
 		/* fatal error, do not requeue */
 		goto free_skb;
 	}
 	if (mp->ttyinstop) {
-#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
-		printk(KERN_DEBUG "capi: recv tty throttled\n");
-#endif
+		pr_debug("capi: recv tty throttled\n");
 		goto deref_ldisc;
 	}
 
 	if (tty->receive_room < datalen) {
-#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
-		printk(KERN_DEBUG "capi: no room in tty\n");
-#endif
+		pr_debug("capi: no room in tty\n");
 		goto deref_ldisc;
 	}
 
@@ -479,10 +454,8 @@ static int handle_recv_skb(struct capiminor *mp, struct sk_buff *skb)
 
 	if (errcode == CAPI_NOERROR) {
 		skb_pull(skb, CAPIMSG_LEN(skb->data));
-#ifdef _DEBUG_DATAFLOW
-		printk(KERN_DEBUG "capi: DATA_B3_RESP %u len=%d => ldisc\n",
-					datahandle, skb->len);
-#endif
+		pr_debug("capi: DATA_B3_RESP %u len=%d => ldisc\n",
+			 datahandle, skb->len);
 		ld->ops->receive_buf(tty, skb->data, NULL, skb->len);
 	} else {
 		printk(KERN_ERR "capi: send DATA_B3_RESP failed=%x\n",
@@ -529,9 +502,7 @@ static void handle_minor_send(struct capiminor *mp)
 		return;
 
 	if (mp->ttyoutstop) {
-#if defined(_DEBUG_DATAFLOW) || defined(_DEBUG_TTYFUNCS)
-		printk(KERN_DEBUG "capi: send: tty stopped\n");
-#endif
+		pr_debug("capi: send: tty stopped\n");
 		tty_kref_put(tty);
 		return;
 	}
@@ -573,10 +544,8 @@ static void handle_minor_send(struct capiminor *mp)
 		}
 		errcode = capi20_put_message(mp->ap, skb);
 		if (errcode == CAPI_NOERROR) {
-#ifdef _DEBUG_DATAFLOW
-			printk(KERN_DEBUG "capi: DATA_B3_REQ %u len=%u\n",
-							datahandle, len);
-#endif
+			pr_debug("capi: DATA_B3_REQ %u len=%u\n",
+				 datahandle, len);
 			continue;
 		}
 		capiminor_del_ack(mp, datahandle);
@@ -650,10 +619,8 @@ static void capi_recv_message(struct capi20_appl *ap, struct sk_buff *skb)
 	}
 	if (CAPIMSG_SUBCOMMAND(skb->data) == CAPI_IND) {
 		datahandle = CAPIMSG_U16(skb->data, CAPIMSG_BASELEN+4+4+2);
-#ifdef _DEBUG_DATAFLOW
-		printk(KERN_DEBUG "capi_signal: DATA_B3_IND %u len=%d\n",
-				datahandle, skb->len-CAPIMSG_LEN(skb->data));
-#endif
+		pr_debug("capi_signal: DATA_B3_IND %u len=%d\n",
+			 datahandle, skb->len-CAPIMSG_LEN(skb->data));
 		skb_queue_tail(&mp->inqueue, skb);
 
 		handle_minor_recv(mp);
@@ -661,11 +628,9 @@ static void capi_recv_message(struct capi20_appl *ap, struct sk_buff *skb)
 	} else if (CAPIMSG_SUBCOMMAND(skb->data) == CAPI_CONF) {
 
 		datahandle = CAPIMSG_U16(skb->data, CAPIMSG_BASELEN+4);
-#ifdef _DEBUG_DATAFLOW
-		printk(KERN_DEBUG "capi_signal: DATA_B3_CONF %u 0x%x\n",
-				datahandle,
-				CAPIMSG_U16(skb->data, CAPIMSG_BASELEN+4+2));
-#endif
+		pr_debug("capi_signal: DATA_B3_CONF %u 0x%x\n",
+			 datahandle,
+			 CAPIMSG_U16(skb->data, CAPIMSG_BASELEN+4+2));
 		kfree_skb(skb);
 		capiminor_del_ack(mp, datahandle);
 		tty = tty_port_tty_get(&mp->port);
@@ -1095,9 +1060,7 @@ static int capinc_tty_write(struct tty_struct *tty,
 	struct capiminor *mp = tty->driver_data;
 	struct sk_buff *skb;
 
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_write(count=%d)\n", count);
-#endif
+	pr_debug("capinc_tty_write(count=%d)\n", count);
 
 	spin_lock_bh(&mp->outlock);
 	skb = mp->outskb;
@@ -1133,9 +1096,7 @@ static int capinc_tty_put_char(struct tty_struct *tty, unsigned char ch)
 	struct sk_buff *skb;
 	int ret = 1;
 
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_put_char(%u)\n", ch);
-#endif
+	pr_debug("capinc_put_char(%u)\n", ch);
 
 	spin_lock_bh(&mp->outlock);
 	skb = mp->outskb;
@@ -1174,9 +1135,7 @@ static void capinc_tty_flush_chars(struct tty_struct *tty)
 	struct capiminor *mp = tty->driver_data;
 	struct sk_buff *skb;
 
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_flush_chars\n");
-#endif
+	pr_debug("capinc_tty_flush_chars\n");
 
 	spin_lock_bh(&mp->outlock);
 	skb = mp->outskb;
@@ -1200,9 +1159,7 @@ static int capinc_tty_write_room(struct tty_struct *tty)
 
 	room = CAPINC_MAX_SENDQUEUE-skb_queue_len(&mp->outqueue);
 	room *= CAPI_MAX_BLKSIZE;
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_write_room = %d\n", room);
-#endif
+	pr_debug("capinc_tty_write_room = %d\n", room);
 	return room;
 }
 
@@ -1210,12 +1167,10 @@ static int capinc_tty_chars_in_buffer(struct tty_struct *tty)
 {
 	struct capiminor *mp = tty->driver_data;
 
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_chars_in_buffer = %d nack=%d sq=%d rq=%d\n",
-			mp->outbytes, mp->nack,
-			skb_queue_len(&mp->outqueue),
-			skb_queue_len(&mp->inqueue));
-#endif
+	pr_debug("capinc_tty_chars_in_buffer = %d nack=%d sq=%d rq=%d\n",
+		 mp->outbytes, mp->nack,
+		 skb_queue_len(&mp->outqueue),
+		 skb_queue_len(&mp->inqueue));
 	return mp->outbytes;
 }
 
@@ -1227,17 +1182,13 @@ static int capinc_tty_ioctl(struct tty_struct *tty,
 
 static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
 {
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_set_termios\n");
-#endif
+	pr_debug("capinc_tty_set_termios\n");
 }
 
 static void capinc_tty_throttle(struct tty_struct *tty)
 {
 	struct capiminor *mp = tty->driver_data;
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_throttle\n");
-#endif
+	pr_debug("capinc_tty_throttle\n");
 	mp->ttyinstop = 1;
 }
 
@@ -1245,9 +1196,7 @@ static void capinc_tty_unthrottle(struct tty_struct *tty)
 {
 	struct capiminor *mp = tty->driver_data;
 
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_unthrottle\n");
-#endif
+	pr_debug("capinc_tty_unthrottle\n");
 	mp->ttyinstop = 0;
 	handle_minor_recv(mp);
 }
@@ -1256,9 +1205,7 @@ static void capinc_tty_stop(struct tty_struct *tty)
 {
 	struct capiminor *mp = tty->driver_data;
 
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_stop\n");
-#endif
+	pr_debug("capinc_tty_stop\n");
 	mp->ttyoutstop = 1;
 }
 
@@ -1266,9 +1213,7 @@ static void capinc_tty_start(struct tty_struct *tty)
 {
 	struct capiminor *mp = tty->driver_data;
 
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_start\n");
-#endif
+	pr_debug("capinc_tty_start\n");
 	mp->ttyoutstop = 0;
 	handle_minor_send(mp);
 }
@@ -1277,39 +1222,29 @@ static void capinc_tty_hangup(struct tty_struct *tty)
 {
 	struct capiminor *mp = tty->driver_data;
 
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_hangup\n");
-#endif
+	pr_debug("capinc_tty_hangup\n");
 	tty_port_hangup(&mp->port);
 }
 
 static int capinc_tty_break_ctl(struct tty_struct *tty, int state)
 {
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_break_ctl(%d)\n", state);
-#endif
+	pr_debug("capinc_tty_break_ctl(%d)\n", state);
 	return 0;
 }
 
 static void capinc_tty_flush_buffer(struct tty_struct *tty)
 {
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_flush_buffer\n");
-#endif
+	pr_debug("capinc_tty_flush_buffer\n");
 }
 
 static void capinc_tty_set_ldisc(struct tty_struct *tty)
 {
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_set_ldisc\n");
-#endif
+	pr_debug("capinc_tty_set_ldisc\n");
 }
 
 static void capinc_tty_send_xchar(struct tty_struct *tty, char ch)
 {
-#ifdef _DEBUG_TTYFUNCS
-	printk(KERN_DEBUG "capinc_tty_send_xchar(%d)\n", ch);
-#endif
+	pr_debug("capinc_tty_send_xchar(%d)\n", ch);
 }
 
 static const struct tty_operations capinc_ops = {
@@ -1514,10 +1449,8 @@ static int __init capi_init(void)
 
 	proc_init();
 
-#if defined(CONFIG_ISDN_CAPI_CAPIFS) || defined(CONFIG_ISDN_CAPI_CAPIFS_MODULE)
-        compileinfo = " (middleware+capifs)";
-#elif defined(CONFIG_ISDN_CAPI_MIDDLEWARE)
-        compileinfo = " (no capifs)";
+#ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
+        compileinfo = " (middleware)";
 #else
         compileinfo = " (no middleware)";
 #endif
diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
deleted file mode 100644
index b4faed7fe0d..00000000000
--- a/drivers/isdn/capi/capifs.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* $Id: capifs.c,v 1.1.2.3 2004/01/16 21:09:26 keil Exp $
- * 
- * Copyright 2000 by Carsten Paeth <calle@calle.de>
- *
- * Heavily based on devpts filesystem from H. Peter Anvin
- * 
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/fs.h>
-#include <linux/mount.h>
-#include <linux/slab.h>
-#include <linux/namei.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/sched.h>	/* current */
-
-#include "capifs.h"
-
-MODULE_DESCRIPTION("CAPI4Linux: /dev/capi/ filesystem");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------------ */
-
-#define CAPIFS_SUPER_MAGIC (('C'<<8)|'N')
-
-static struct vfsmount *capifs_mnt;
-static int capifs_mnt_count;
-
-static struct {
-	int setuid;
-	int setgid;
-	uid_t   uid;
-	gid_t   gid;
-	umode_t mode;
-} config = {.mode = 0600};
-
-/* ------------------------------------------------------------------ */
-
-static int capifs_remount(struct super_block *s, int *flags, char *data)
-{
-	int setuid = 0;
-	int setgid = 0;
-	uid_t uid = 0;
-	gid_t gid = 0;
-	umode_t mode = 0600;
-	char *this_char;
-	char *new_opt = kstrdup(data, GFP_KERNEL);
-
-	this_char = NULL;
-	while ((this_char = strsep(&data, ",")) != NULL) {
-		int n;
-		char dummy;
-		if (!*this_char)
-			continue;
-		if (sscanf(this_char, "uid=%i%c", &n, &dummy) == 1) {
-			setuid = 1;
-			uid = n;
-		} else if (sscanf(this_char, "gid=%i%c", &n, &dummy) == 1) {
-			setgid = 1;
-			gid = n;
-		} else if (sscanf(this_char, "mode=%o%c", &n, &dummy) == 1)
-			mode = n & ~S_IFMT;
-		else {
-			kfree(new_opt);
-			printk("capifs: called with bogus options\n");
-			return -EINVAL;
-		}
-	}
-
-	mutex_lock(&s->s_root->d_inode->i_mutex);
-
-	replace_mount_options(s, new_opt);
-	config.setuid  = setuid;
-	config.setgid  = setgid;
-	config.uid     = uid;
-	config.gid     = gid;
-	config.mode    = mode;
-
-	mutex_unlock(&s->s_root->d_inode->i_mutex);
-
-	return 0;
-}
-
-static const struct super_operations capifs_sops =
-{
-	.statfs		= simple_statfs,
-	.remount_fs	= capifs_remount,
-	.show_options	= generic_show_options,
-};
-
-
-static int
-capifs_fill_super(struct super_block *s, void *data, int silent)
-{
-	struct inode * inode;
-
-	s->s_blocksize = 1024;
-	s->s_blocksize_bits = 10;
-	s->s_magic = CAPIFS_SUPER_MAGIC;
-	s->s_op = &capifs_sops;
-	s->s_time_gran = 1;
-
-	inode = new_inode(s);
-	if (!inode)
-		goto fail;
-	inode->i_ino = 1;
-	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
-	inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
-	inode->i_op = &simple_dir_inode_operations;
-	inode->i_fop = &simple_dir_operations;
-	inode->i_nlink = 2;
-
-	s->s_root = d_alloc_root(inode);
-	if (s->s_root)
-		return 0;
-	
-	printk("capifs: get root dentry failed\n");
-	iput(inode);
-fail:
-	return -ENOMEM;
-}
-
-static struct dentry *capifs_mount(struct file_system_type *fs_type,
-	int flags, const char *dev_name, void *data)
-{
-	return mount_single(fs_type, flags, data, capifs_fill_super);
-}
-
-static struct file_system_type capifs_fs_type = {
-	.owner		= THIS_MODULE,
-	.name		= "capifs",
-	.mount		= capifs_mount,
-	.kill_sb	= kill_anon_super,
-};
-
-static struct dentry *new_ncci(unsigned int number, dev_t device)
-{
-	struct super_block *s = capifs_mnt->mnt_sb;
-	struct dentry *root = s->s_root;
-	struct dentry *dentry;
-	struct inode *inode;
-	char name[10];
-	int namelen;
-
-	mutex_lock(&root->d_inode->i_mutex);
-
-	namelen = sprintf(name, "%d", number);
-	dentry = lookup_one_len(name, root, namelen);
-	if (IS_ERR(dentry)) {
-		dentry = NULL;
-		goto unlock_out;
-	}
-
-	if (dentry->d_inode) {
-		dput(dentry);
-		dentry = NULL;
-		goto unlock_out;
-	}
-
-	inode = new_inode(s);
-	if (!inode) {
-		dput(dentry);
-		dentry = NULL;
-		goto unlock_out;
-	}
-
-	/* config contents is protected by root's i_mutex */
-	inode->i_uid = config.setuid ? config.uid : current_fsuid();
-	inode->i_gid = config.setgid ? config.gid : current_fsgid();
-	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
-	inode->i_ino = number + 2;
-	init_special_inode(inode, S_IFCHR|config.mode, device);
-
-	d_instantiate(dentry, inode);
-	dget(dentry);
-
-unlock_out:
-	mutex_unlock(&root->d_inode->i_mutex);
-
-	return dentry;
-}
-
-struct dentry *capifs_new_ncci(unsigned int number, dev_t device)
-{
-	struct dentry *dentry;
-
-	if (simple_pin_fs(&capifs_fs_type, &capifs_mnt, &capifs_mnt_count) < 0)
-		return NULL;
-
-	dentry = new_ncci(number, device);
-	if (!dentry)
-		simple_release_fs(&capifs_mnt, &capifs_mnt_count);
-
-	return dentry;
-}
-
-void capifs_free_ncci(struct dentry *dentry)
-{
-	struct dentry *root = capifs_mnt->mnt_sb->s_root;
-	struct inode *inode;
-
-	if (!dentry)
-		return;
-
-	mutex_lock(&root->d_inode->i_mutex);
-
-	inode = dentry->d_inode;
-	if (inode) {
-		drop_nlink(inode);
-		d_delete(dentry);
-		dput(dentry);
-	}
-	dput(dentry);
-
-	mutex_unlock(&root->d_inode->i_mutex);
-
-	simple_release_fs(&capifs_mnt, &capifs_mnt_count);
-}
-
-static int __init capifs_init(void)
-{
-	return register_filesystem(&capifs_fs_type);
-}
-
-static void __exit capifs_exit(void)
-{
-	unregister_filesystem(&capifs_fs_type);
-}
-
-EXPORT_SYMBOL(capifs_new_ncci);
-EXPORT_SYMBOL(capifs_free_ncci);
-
-module_init(capifs_init);
-module_exit(capifs_exit);
diff --git a/drivers/isdn/capi/capifs.h b/drivers/isdn/capi/capifs.h
deleted file mode 100644
index e193d118953..00000000000
--- a/drivers/isdn/capi/capifs.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* $Id: capifs.h,v 1.1.2.2 2004/01/16 21:09:26 keil Exp $
- * 
- * Copyright 2000 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/dcache.h>
-
-#if defined(CONFIG_ISDN_CAPI_CAPIFS) || defined(CONFIG_ISDN_CAPI_CAPIFS_MODULE)
-
-struct dentry *capifs_new_ncci(unsigned int num, dev_t device);
-void capifs_free_ncci(struct dentry *dentry);
-
-#else
-
-static inline struct dentry *capifs_new_ncci(unsigned int num, dev_t device)
-{
-	return NULL;
-}
-
-static inline void capifs_free_ncci(struct dentry *dentry)
-{
-}
-
-#endif
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 8a3c5cfc4fe..3913f47ef86 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -1157,7 +1157,6 @@ static void write_iso_tasklet(unsigned long data)
 	struct urb *urb;
 	int status;
 	struct usb_iso_packet_descriptor *ifd;
-	int offset;
 	unsigned long flags;
 	int i;
 	struct sk_buff *skb;
@@ -1225,7 +1224,6 @@ static void write_iso_tasklet(unsigned long data)
 			 *   successfully sent
 			 * - all following frames are not sent at all
 			 */
-			offset = done->limit;	/* default (no error) */
 			for (i = 0; i < BAS_NUMFRAMES; i++) {
 				ifd = &urb->iso_frame_desc[i];
 				if (ifd->status ||
@@ -1235,9 +1233,6 @@ static void write_iso_tasklet(unsigned long data)
 						 i, ifd->actual_length,
 						 ifd->length,
 						 get_usb_statmsg(ifd->status));
-					offset = (ifd->offset +
-						  ifd->actual_length)
-						 % BAS_OUTBUFSIZE;
 					break;
 				}
 			}
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index a14187605f5..ba74646cf0e 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -390,12 +390,12 @@ static const struct zsau_resp_t {
  */
 static int cid_of_response(char *s)
 {
-	unsigned long cid;
+	int cid;
 	int rc;
 
 	if (s[-1] != ';')
 		return 0;	/* no CID separator */
-	rc = strict_strtoul(s, 10, &cid);
+	rc = kstrtoint(s, 10, &cid);
 	if (rc)
 		return 0;	/* CID not numeric */
 	if (cid < 1 || cid > 65535)
@@ -566,27 +566,19 @@ void gigaset_handle_modem_response(struct cardstate *cs)
 		case RT_ZCAU:
 			event->parameter = -1;
 			if (curarg + 1 < params) {
-				unsigned long type, value;
-
-				i = strict_strtoul(argv[curarg++], 16, &type);
-				j = strict_strtoul(argv[curarg++], 16, &value);
+				u8 type, value;
 
-				if (i == 0 && type < 256 &&
-				    j == 0 && value < 256)
+				i = kstrtou8(argv[curarg++], 16, &type);
+				j = kstrtou8(argv[curarg++], 16, &value);
+				if (i == 0 && j == 0)
 					event->parameter = (type << 8) | value;
 			} else
 				curarg = params - 1;
 			break;
 		case RT_NUMBER:
-			event->parameter = -1;
-			if (curarg < params) {
-				unsigned long res;
-				int rc;
-
-				rc = strict_strtoul(argv[curarg++], 10, &res);
-				if (rc == 0)
-					event->parameter = res;
-			}
+			if (curarg >= params ||
+			    kstrtoint(argv[curarg++], 10, &event->parameter))
+				event->parameter = -1;
 			gig_dbg(DEBUG_EVENT, "parameter==%d", event->parameter);
 			break;
 		}
diff --git a/drivers/isdn/hardware/eicon/debug.c b/drivers/isdn/hardware/eicon/debug.c
index 36264012088..7a9894cb455 100644
--- a/drivers/isdn/hardware/eicon/debug.c
+++ b/drivers/isdn/hardware/eicon/debug.c
@@ -861,7 +861,7 @@ static int diva_get_idi_adapter_info (IDI_CALL request, dword* serial, dword* lo
 void diva_mnt_add_xdi_adapter (const DESCRIPTOR* d) {
   diva_os_spin_lock_magic_t old_irql, old_irql1;
   dword sec, usec, logical, serial, org_mask;
-  int id, best_id = 0, free_id = -1;
+  int id, free_id = -1;
   char tmp[128];
   diva_dbg_entry_head_t* pmsg = NULL;
   int len;
@@ -906,7 +906,6 @@ void diva_mnt_add_xdi_adapter (const DESCRIPTOR* d) {
         and slot is still free - reuse it
         */
       free_id = id;
-      best_id = 1;
       break;
     }
   }
diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index 9f5b68037a2..e330da0c5fc 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -673,7 +673,7 @@ struct async_s {
 
 
 /*------------------------------------------------------------------*/
-/* auxilliary states for supplementary services                     */
+/* auxiliary states for supplementary services                     */
 /*------------------------------------------------------------------*/
 
 #define IDLE                0
diff --git a/drivers/isdn/hardware/eicon/io.h b/drivers/isdn/hardware/eicon/io.h
index 0c6c650d76b..a6f17559636 100644
--- a/drivers/isdn/hardware/eicon/io.h
+++ b/drivers/isdn/hardware/eicon/io.h
@@ -60,7 +60,7 @@ typedef struct _diva_xdi_capi_cfg {
   -------------------------------------------------------------------------- */
 struct _ISDN_ADAPTER {
  void             (* DIRequest)(PISDN_ADAPTER, ENTITY *) ;
- int                 State ; /* from NT4 1.srv, a good idea, but  a poor achievment */
+ int                 State ; /* from NT4 1.srv, a good idea, but  a poor achievement */
  int                 Initialized ;
  int         RegisteredWithDidd ;
  int                 Unavailable ;  /* callback function possible? */
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index 341ef17c22a..a3395986df3 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -1198,7 +1198,6 @@ static byte connect_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
   word ch;
   word i;
   word Info;
-  word CIP;
   byte LinkLayer;
   API_PARSE * ai;
   API_PARSE * bp;
@@ -1340,7 +1339,6 @@ static byte connect_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
         add_s(plci,BC,&parms[6]);
         add_s(plci,LLC,&parms[7]);
         add_s(plci,HLC,&parms[8]);
-        CIP = GET_WORD(parms[0].info);
         if (a->Info_Mask[appl->Id-1] & 0x200)
         {
           /* early B3 connect (CIP mask bit 9) no release after a disc */
@@ -2639,7 +2637,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
     }
     else
     {
-      /* local reply if assign unsuccessfull
+      /* local reply if assign unsuccessful
          or B3 protocol allows only one layer 3 connection
            and already connected
              or B2 protocol not any LAPD
@@ -4830,7 +4828,6 @@ static void sig_ind(PLCI *plci)
   dword x_Id;
   dword Id;
   dword rId;
-  word Number = 0;
   word i;
   word cip;
   dword cip_mask;
@@ -5106,7 +5103,7 @@ static void sig_ind(PLCI *plci)
     }
   }
 
-  if(plci->appl) Number = plci->appl->Number++;
+  if(plci->appl) plci->appl->Number++;
 
   switch(plci->Sig.Ind) {
   /* Response to Get_Supported_Services request */
@@ -5894,7 +5891,6 @@ static void sig_ind(PLCI *plci)
     break;
 
   case TEL_CTRL:
-    Number = 0;
     ie = multi_fac_parms[0]; /* inspect the facility hook indications */
     if(plci->State==ADVANCED_VOICE_SIG && ie[0]){
       switch (ie[1]&0x91) {
@@ -8189,7 +8185,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
       dlc[ 0] = 15;
       if(b2_config->length >= 8) { /* PIAFS control abilities */
         dlc[ 7] = 10; 
-        dlc[16] = 2; /* Length of PIAFS extention */
+        dlc[16] = 2; /* Length of PIAFS extension */
         dlc[17] = PIAFS_UDATA_ABILITIES; /* control (UDATA) ability */
         dlc[18] = b2_config_parms[4].info[0]; /* value */
         dlc[ 0] = 18;
@@ -10119,14 +10115,12 @@ static byte dtmf_request (dword Id, word Number, DIVA_CAPI_ADAPTER   *a, PLCI
 
 static void dtmf_confirmation (dword Id, PLCI   *plci)
 {
-  word Info;
   word i;
     byte result[4];
 
   dbug (1, dprintf ("[%06lx] %s,%d: dtmf_confirmation",
     UnMapId (Id), (char   *)(FILE_), __LINE__));
 
-  Info = GOOD;
   result[0] = 2;
   PUT_WORD (&result[1], DTMF_SUCCESS);
   if (plci->dtmf_send_requests != 0)
@@ -11520,13 +11514,12 @@ static word mixer_restore_config (dword Id, PLCI   *plci, byte Rc)
 static void mixer_command (dword Id, PLCI   *plci, byte Rc)
 {
   DIVA_CAPI_ADAPTER   *a;
-  word i, internal_command, Info;
+  word i, internal_command;
 
   dbug (1, dprintf ("[%06lx] %s,%d: mixer_command %02x %04x %04x",
     UnMapId (Id), (char   *)(FILE_), __LINE__, Rc, plci->internal_command,
     plci->li_cmd));
 
-  Info = GOOD;
   a = plci->adapter;
   internal_command = plci->internal_command;
   plci->internal_command = 0;
@@ -11550,7 +11543,6 @@ static void mixer_command (dword Id, PLCI   *plci, byte Rc)
         {
           dbug (1, dprintf ("[%06lx] %s,%d: Load mixer failed",
             UnMapId (Id), (char   *)(FILE_), __LINE__));
-          Info = _FACILITY_NOT_SUPPORTED;
           break;
         }
         if (plci->internal_command)
@@ -11592,7 +11584,6 @@ static void mixer_command (dword Id, PLCI   *plci, byte Rc)
             } while ((plci->li_plci_b_write_pos != plci->li_plci_b_req_pos)
               && !(plci->li_plci_b_queue[i] & LI_PLCI_B_LAST_FLAG));
           }
-          Info = _FACILITY_NOT_SUPPORTED;
           break;
         }
         if (plci->internal_command)
@@ -11610,7 +11601,6 @@ static void mixer_command (dword Id, PLCI   *plci, byte Rc)
         {
           dbug (1, dprintf ("[%06lx] %s,%d: Unload mixer failed",
             UnMapId (Id), (char   *)(FILE_), __LINE__));
-          Info = _FACILITY_NOT_SUPPORTED;
           break;
         }
         if (plci->internal_command)
@@ -12448,13 +12438,11 @@ static byte mixer_request (dword Id, word Number, DIVA_CAPI_ADAPTER   *a, PLCI
 static void mixer_indication_coefs_set (dword Id, PLCI   *plci)
 {
   dword d;
-  DIVA_CAPI_ADAPTER   *a;
     byte result[12];
 
   dbug (1, dprintf ("[%06lx] %s,%d: mixer_indication_coefs_set",
     UnMapId (Id), (char   *)(FILE_), __LINE__));
 
-  a = plci->adapter;
   if (plci->li_plci_b_read_pos != plci->li_plci_b_req_pos)
   {
     do
@@ -14111,13 +14099,11 @@ static void select_b_command (dword Id, PLCI   *plci, byte Rc)
 
 static void fax_connect_ack_command (dword Id, PLCI   *plci, byte Rc)
 {
-  word Info;
   word internal_command;
 
   dbug (1, dprintf ("[%06lx] %s,%d: fax_connect_ack_command %02x %04x",
     UnMapId (Id), (char   *)(FILE_), __LINE__, Rc, plci->internal_command));
 
-  Info = GOOD;
   internal_command = plci->internal_command;
   plci->internal_command = 0;
   switch (internal_command)
@@ -14160,13 +14146,11 @@ static void fax_connect_ack_command (dword Id, PLCI   *plci, byte Rc)
 
 static void fax_edata_ack_command (dword Id, PLCI   *plci, byte Rc)
 {
-  word Info;
   word internal_command;
 
   dbug (1, dprintf ("[%06lx] %s,%d: fax_edata_ack_command %02x %04x",
     UnMapId (Id), (char   *)(FILE_), __LINE__, Rc, plci->internal_command));
 
-  Info = GOOD;
   internal_command = plci->internal_command;
   plci->internal_command = 0;
   switch (internal_command)
@@ -14395,13 +14379,11 @@ static void rtp_connect_b3_req_command (dword Id, PLCI   *plci, byte Rc)
 
 static void rtp_connect_b3_res_command (dword Id, PLCI   *plci, byte Rc)
 {
-  word Info;
   word internal_command;
 
   dbug (1, dprintf ("[%06lx] %s,%d: rtp_connect_b3_res_command %02x %04x",
     UnMapId (Id), (char   *)(FILE_), __LINE__, Rc, plci->internal_command));
 
-  Info = GOOD;
   internal_command = plci->internal_command;
   plci->internal_command = 0;
   switch (internal_command)
@@ -14423,7 +14405,6 @@ static void rtp_connect_b3_res_command (dword Id, PLCI   *plci, byte Rc)
     {
       dbug (1, dprintf ("[%06lx] %s,%d: RTP setting connect resp info failed %02x",
         UnMapId (Id), (char   *)(FILE_), __LINE__, Rc));
-      Info = _WRONG_STATE;
       break;
     }
     if (plci_nl_busy (plci))
diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h
index 1c6945768a3..bf6b0181240 100644
--- a/drivers/isdn/hardware/eicon/pc.h
+++ b/drivers/isdn/hardware/eicon/pc.h
@@ -701,7 +701,7 @@ Byte | 8 7 6 5 4 3 2 1
 #define PROTCAP_FREE12    0x1000  /* not used                            */
 #define PROTCAP_FREE13    0x2000  /* not used                            */
 #define PROTCAP_FREE14    0x4000  /* not used                            */
-#define PROTCAP_EXTENSION 0x8000  /* used for future extentions          */
+#define PROTCAP_EXTENSION 0x8000  /* used for future extensions          */
 /* -----------------------------------------------------------* */
 /* Onhook data transmission ETS30065901 */
 /* Message Type */
diff --git a/drivers/isdn/hardware/eicon/um_idi.c b/drivers/isdn/hardware/eicon/um_idi.c
index 6563db998d0..ac0bdd1f23f 100644
--- a/drivers/isdn/hardware/eicon/um_idi.c
+++ b/drivers/isdn/hardware/eicon/um_idi.c
@@ -363,7 +363,7 @@ int diva_um_idi_read(void *entity,
 
 		if ((ret = (*cp_fn) (os_handle, dst, data, length)) >= 0) {
 			/*
-			   Acknowledge only if read was successfull
+			   Acknowledge only if read was successful
 			 */
 			diva_data_q_ack_segment4read(q);
 		}
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 4e3780d78ac..f6f3c87cc7c 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -118,7 +118,7 @@
  *	-> See hfc_multi.h for HFC_IO_MODE_* values
  *	By default, the IO mode is pci memory IO (MEMIO).
  *	Some cards require specific IO mode, so it cannot be changed.
- *	It may be usefull to set IO mode to register io (REGIO) to solve
+ *	It may be useful to set IO mode to register io (REGIO) to solve
  *	PCI bridge problems.
  *	If unsure, don't give this parameter.
  *
@@ -903,7 +903,7 @@ vpm_echocan_off(struct hfc_multi *hc, int ch)
 /*
  * Speech Design resync feature
  * NOTE: This is called sometimes outside interrupt handler.
- * We must lock irqsave, so no other interrupt (other card) will occurr!
+ * We must lock irqsave, so no other interrupt (other card) will occur!
  * Also multiple interrupts may nest, so must lock each access (lists, card)!
  */
 static inline void
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 15d323b8be6..b01a7be1300 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -272,7 +272,7 @@ reset_hfcpci(struct hfc_pci *hc)
 	 * D- and monitor/CI channel are not enabled
 	 * STIO1 is used as output for data, B1+B2 from ST->IOM+HFC
 	 * STIO2 is used as data input, B1+B2 from IOM->ST
-	 * ST B-channel send disabled -> continous 1s
+	 * ST B-channel send disabled -> continuous 1s
 	 * The IOM slots are always enabled
 	 */
 	if (test_bit(HFC_CFG_PCM, &hc->cfg)) {
@@ -405,7 +405,7 @@ hfcpci_empty_bfifo(struct bchannel *bch, struct bzfifo *bz,
     u_char *bdata, int count)
 {
 	u_char		*ptr, *ptr1, new_f2;
-	int		total, maxlen, new_z2;
+	int		maxlen, new_z2;
 	struct zt	*zp;
 
 	if ((bch->debug & DEBUG_HW_BCHANNEL) && !(bch->debug & DEBUG_HW_BFIFO))
@@ -431,7 +431,6 @@ hfcpci_empty_bfifo(struct bchannel *bch, struct bzfifo *bz,
 			printk(KERN_WARNING "HFCPCI: receive out of memory\n");
 			return;
 		}
-		total = count;
 		count -= 3;
 		ptr = skb_put(bch->rx_skb, count);
 
@@ -968,7 +967,6 @@ static void
 ph_state_nt(struct dchannel *dch)
 {
 	struct hfc_pci	*hc = dch->hw;
-	u_char	val;
 
 	if (dch->debug)
 		printk(KERN_DEBUG "%s: NT newstate %x\n",
@@ -982,7 +980,7 @@ ph_state_nt(struct dchannel *dch)
 			hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
 			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
 			/* Clear already pending ints */
-			val = Read_hfc(hc, HFCPCI_INT_S1);
+			(void) Read_hfc(hc, HFCPCI_INT_S1);
 			Write_hfc(hc, HFCPCI_STATES, 4 | HFCPCI_LOAD_STATE);
 			udelay(10);
 			Write_hfc(hc, HFCPCI_STATES, 4);
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 8700474747e..3ccbff13eaf 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -118,14 +118,12 @@ static void
 ctrl_complete(struct urb *urb)
 {
 	struct hfcsusb *hw = (struct hfcsusb *) urb->context;
-	struct ctrl_buf *buf;
 
 	if (debug & DBG_HFC_CALL_TRACE)
 		printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
 
 	urb->dev = hw->dev;
 	if (hw->ctrl_cnt) {
-		buf = &hw->ctrl_buff[hw->ctrl_out_idx];
 		hw->ctrl_cnt--;	/* decrement actual count */
 		if (++hw->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
 			hw->ctrl_out_idx = 0;	/* pointer wrap */
@@ -1726,7 +1724,6 @@ hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel)
 static int
 setup_hfcsusb(struct hfcsusb *hw)
 {
-	int err;
 	u_char b;
 
 	if (debug & DBG_HFC_CALL_TRACE)
@@ -1745,7 +1742,7 @@ setup_hfcsusb(struct hfcsusb *hw)
 	}
 
 	/* first set the needed config, interface and alternate */
-	err = usb_set_interface(hw->dev, hw->if_used, hw->alt_used);
+	(void) usb_set_interface(hw->dev, hw->if_used, hw->alt_used);
 
 	hw->led_state = 0;
 
diff --git a/drivers/isdn/hisax/arcofi.c b/drivers/isdn/hisax/arcofi.c
index 85a8fd8dd0b..21cbbe1d556 100644
--- a/drivers/isdn/hisax/arcofi.c
+++ b/drivers/isdn/hisax/arcofi.c
@@ -30,8 +30,6 @@ add_arcofi_timer(struct IsdnCardState *cs) {
 
 static void
 send_arcofi(struct IsdnCardState *cs) {
-	u_char val;
-	
 	add_arcofi_timer(cs);
 	cs->dc.isac.mon_txp = 0;
 	cs->dc.isac.mon_txc = cs->dc.isac.arcofi_list->len;
@@ -45,7 +43,7 @@ send_arcofi(struct IsdnCardState *cs) {
 	cs->dc.isac.mocr &= 0x0f;
 	cs->dc.isac.mocr |= 0xa0;
 	cs->writeisac(cs, ISAC_MOCR, cs->dc.isac.mocr);
-	val = cs->readisac(cs, ISAC_MOSR);
+	(void) cs->readisac(cs, ISAC_MOSR);
 	cs->writeisac(cs, ISAC_MOX1, cs->dc.isac.mon_tx[cs->dc.isac.mon_txp++]);
 	cs->dc.isac.mocr |= 0x10;
 	cs->writeisac(cs, ISAC_MOCR, cs->dc.isac.mocr);
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 496d477af0f..9e5e87be756 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -129,12 +129,10 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
 
 static int __devinit elsa_cs_config(struct pcmcia_device *link)
 {
-    local_info_t *dev;
     int i;
     IsdnCard_t icard;
 
     dev_dbg(&link->dev, "elsa_config(0x%p)\n", link);
-    dev = link->priv;
 
     link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 
diff --git a/drivers/isdn/hisax/elsa_ser.c b/drivers/isdn/hisax/elsa_ser.c
index cbda3790a10..3fa9f617109 100644
--- a/drivers/isdn/hisax/elsa_ser.c
+++ b/drivers/isdn/hisax/elsa_ser.c
@@ -109,11 +109,10 @@ static void change_speed(struct IsdnCardState *cs, int baud)
 {
 	int	quot = 0, baud_base;
 	unsigned cval, fcr = 0;
-	int	bits;
 
 
 	/* byte size and parity */
-	cval = 0x03; bits = 10;
+	cval = 0x03;
 	/* Determine divisor based on baud rate */
 	baud_base = BASE_BAUD;
 	quot = baud_base / baud;
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 3147020d188..0cb0546ead8 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -146,7 +146,7 @@ reset_hfcpci(struct IsdnCardState *cs)
 	/* D- and monitor/CI channel are not enabled */
 	/* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */
 	/* STIO2 is used as data input, B1+B2 from IOM->ST */
-	/* ST B-channel send disabled -> continous 1s */
+	/* ST B-channel send disabled -> continuous 1s */
 	/* The IOM slots are always enabled */
 	cs->hw.hfcpci.conn = 0x36;	/* set data flow directions */
 	Write_hfc(cs, HFCPCI_CONNECT, cs->hw.hfcpci.conn);
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 1235b7131ae..156d7c63d94 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -399,7 +399,7 @@ reset_hfcsx(struct IsdnCardState *cs)
 	/* D- and monitor/CI channel are not enabled */
 	/* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */
 	/* STIO2 is used as data input, B1+B2 from IOM->ST */
-	/* ST B-channel send disabled -> continous 1s */
+	/* ST B-channel send disabled -> continuous 1s */
 	/* The IOM slots are always enabled */
 	cs->hw.hfcsx.conn = 0x36;	/* set data flow directions */
 	Write_hfc(cs, HFCSX_CONNECT, cs->hw.hfcsx.conn);
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index ed9527aa5f2..f407de0e006 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -258,11 +258,9 @@ static void
 ctrl_complete(struct urb *urb)
 {
 	hfcusb_data *hfc = (hfcusb_data *) urb->context;
-	ctrl_buft *buf;
 
 	urb->dev = hfc->dev;
 	if (hfc->ctrl_cnt) {
-		buf = &hfc->ctrl_buff[hfc->ctrl_out_idx];
 		hfc->ctrl_cnt--;	/* decrement actual count */
 		if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
 			hfc->ctrl_out_idx = 0;	/* pointer wrap */
@@ -1097,7 +1095,7 @@ static int
 hfc_usb_init(hfcusb_data * hfc)
 {
 	usb_fifo *fifo;
-	int i, err;
+	int i;
 	u_char b;
 	struct hisax_b_if *p_b_if[2];
 
@@ -1112,7 +1110,7 @@ hfc_usb_init(hfcusb_data * hfc)
 	}
 
 	/* first set the needed config, interface and alternate */
-	err = usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
+	usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
 
 	/* do Chip reset */
 	write_usb(hfc, HFCUSB_CIRM, 8);
diff --git a/drivers/isdn/hisax/hfc_usb.h b/drivers/isdn/hisax/hfc_usb.h
index e79f56568d3..2f581c0b469 100644
--- a/drivers/isdn/hisax/hfc_usb.h
+++ b/drivers/isdn/hisax/hfc_usb.h
@@ -126,7 +126,7 @@ static struct hfcusb_symbolic_list urb_errlist[] = {
 
 
 /*
- * device dependant information to support different
+ * device dependent information to support different
  * ISDN Ta's using the HFC-S USB chip
  */
 
diff --git a/drivers/isdn/hisax/ipacx.c b/drivers/isdn/hisax/ipacx.c
index 332104103e1..69084044418 100644
--- a/drivers/isdn/hisax/ipacx.c
+++ b/drivers/isdn/hisax/ipacx.c
@@ -96,7 +96,7 @@ dch_l2l1(struct PStack *st, int pr, void *arg)
 {
 	struct IsdnCardState *cs = (struct IsdnCardState *) st->l1.hardware;
 	struct sk_buff *skb = arg;
-  u_char cda1_cr, cda2_cr;
+	u_char cda1_cr;
 
 	switch (pr) {
 		case (PH_DATA |REQUEST):
@@ -163,7 +163,7 @@ dch_l2l1(struct PStack *st, int pr, void *arg)
       cs->writeisac(cs, IPACX_CDA_TSDP10, 0x80); // Timeslot 0 is B1
       cs->writeisac(cs, IPACX_CDA_TSDP11, 0x81); // Timeslot 0 is B1
       cda1_cr = cs->readisac(cs, IPACX_CDA1_CR);
-      cda2_cr = cs->readisac(cs, IPACX_CDA2_CR);
+      (void) cs->readisac(cs, IPACX_CDA2_CR);
 			if ((long)arg &1) { // loop B1
         cs->writeisac(cs, IPACX_CDA1_CR, cda1_cr |0x0a); 
       }
diff --git a/drivers/isdn/hisax/jade.c b/drivers/isdn/hisax/jade.c
index ea8f840871d..a06cea09158 100644
--- a/drivers/isdn/hisax/jade.c
+++ b/drivers/isdn/hisax/jade.c
@@ -23,10 +23,9 @@
 int
 JadeVersion(struct IsdnCardState *cs, char *s)
 {
-    int ver,i;
+    int ver;
     int to = 50;
     cs->BC_Write_Reg(cs, -1, 0x50, 0x19);
-    i=0;
     while (to) {
     	udelay(1);
 	ver = cs->BC_Read_Reg(cs, -1, 0x60);
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index cc6ee2d3988..b0d9ab1f21c 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -1595,7 +1595,7 @@ l3dss1_setup(struct l3_process *pc, u_char pr, void *arg)
 	 * Bearer Capabilities
 	 */
 	p = skb->data;
-	/* only the first occurence 'll be detected ! */
+	/* only the first occurrence 'll be detected ! */
 	if ((p = findie(p, skb->len, 0x04, 0))) {
 		if ((p[1] < 2) || (p[1] > 11))
 			err = 1;
@@ -2161,7 +2161,7 @@ static void l3dss1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)
 
 /***********************************************/
 /* handle special commands for this protocol.  */
-/* Examples are call independant services like */
+/* Examples are call independent services like */
 /* remote operations with dummy  callref.      */
 /***********************************************/
 static int l3dss1_cmd_global(struct PStack *st, isdn_ctrl *ic)
@@ -2943,7 +2943,7 @@ global_handler(struct PStack *st, int mt, struct sk_buff *skb)
 static void
 dss1up(struct PStack *st, int pr, void *arg)
 {
-	int i, mt, cr, cause, callState;
+	int i, mt, cr, callState;
 	char *ptr;
 	u_char *p;
 	struct sk_buff *skb = arg;
@@ -3034,12 +3034,10 @@ dss1up(struct PStack *st, int pr, void *arg)
 				return;
 			}
 		} else if (mt == MT_STATUS) {
-			cause = 0;
 			if ((ptr = findie(skb->data, skb->len, IE_CAUSE, 0)) != NULL) {
 				ptr++;
 				if (*ptr++ == 2)
 					ptr++;
-				cause = *ptr & 0x7f;
 			}
 			callState = 0;
 			if ((ptr = findie(skb->data, skb->len, IE_CALL_STATE, 0)) != NULL) {
diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c
index f9584491fe8..092dcbb39d9 100644
--- a/drivers/isdn/hisax/l3ni1.c
+++ b/drivers/isdn/hisax/l3ni1.c
@@ -1449,7 +1449,7 @@ l3ni1_setup(struct l3_process *pc, u_char pr, void *arg)
 	 * Bearer Capabilities
 	 */
 	p = skb->data;
-	/* only the first occurence 'll be detected ! */
+	/* only the first occurrence 'll be detected ! */
 	if ((p = findie(p, skb->len, 0x04, 0))) {
 		if ((p[1] < 2) || (p[1] > 11))
 			err = 1;
@@ -2017,7 +2017,7 @@ static void l3ni1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)
 
 /***********************************************/
 /* handle special commands for this protocol.  */
-/* Examples are call independant services like */
+/* Examples are call independent services like */
 /* remote operations with dummy  callref.      */
 /***********************************************/
 static int l3ni1_cmd_global(struct PStack *st, isdn_ctrl *ic)
@@ -2883,7 +2883,7 @@ global_handler(struct PStack *st, int mt, struct sk_buff *skb)
 static void
 ni1up(struct PStack *st, int pr, void *arg)
 {
-	int i, mt, cr, cause, callState;
+	int i, mt, cr, callState;
 	char *ptr;
 	u_char *p;
 	struct sk_buff *skb = arg;
@@ -2986,12 +2986,10 @@ ni1up(struct PStack *st, int pr, void *arg)
 				return;
 			}
 		} else if (mt == MT_STATUS) {
-			cause = 0;
 			if ((ptr = findie(skb->data, skb->len, IE_CAUSE, 0)) != NULL) {
 				ptr++;
 				if (*ptr++ == 2)
 					ptr++;
-				cause = *ptr & 0x7f;
 			}
 			callState = 0;
 			if ((ptr = findie(skb->data, skb->len, IE_CALL_STATE, 0)) != NULL) {
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index 2344e7b3344..a1b89524b50 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -167,7 +167,7 @@ static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
 		return(0);
 	}
 	/* the TJ300 and TJ320 must be detected, the IRQ handling is different
-	 * unfortunatly the chips use the same device ID, but the TJ320 has
+	 * unfortunately the chips use the same device ID, but the TJ320 has
 	 * the bit20 in status PCI cfg register set
 	 */
 	pci_read_config_dword(dev_netjet, 0x04, &cfg);
diff --git a/drivers/isdn/hisax/st5481.h b/drivers/isdn/hisax/st5481.h
index 64f78a8c28c..b9054cb7a0d 100644
--- a/drivers/isdn/hisax/st5481.h
+++ b/drivers/isdn/hisax/st5481.h
@@ -377,7 +377,6 @@ struct st5481_bcs {
 };
 
 struct st5481_adapter {
-	struct list_head list;
 	int number_of_leds;
 	struct usb_device *usb_dev;
 	struct hisax_d_if hisax_d_if;
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index e56e5af889b..ed4bc564dc6 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -124,7 +124,7 @@ static void usb_b_out(struct st5481_bcs *bcs,int buf_nr)
 }
 
 /*
- * Start transfering (flags or data) on the B channel, since
+ * Start transferring (flags or data) on the B channel, since
  * FIFO counters has been set to a non-zero value.
  */
 static void st5481B_start_xfer(void *context)
diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c
index 13751237bfc..9f7fd18ff77 100644
--- a/drivers/isdn/hisax/st5481_init.c
+++ b/drivers/isdn/hisax/st5481_init.c
@@ -46,8 +46,6 @@ module_param(debug, int, 0);
 #endif
 int st5481_debug;
 
-static LIST_HEAD(adapter_list);
-
 /* ======================================================================
  * registration/deregistration with the USB layer
  */
@@ -86,7 +84,6 @@ static int probe_st5481(struct usb_interface *intf,
 		adapter->bcs[i].b_if.ifc.priv = &adapter->bcs[i];
 		adapter->bcs[i].b_if.ifc.l2l1 = st5481_b_l2l1;
 	}
-	list_add(&adapter->list, &adapter_list);
 
 	retval = st5481_setup_usb(adapter);
 	if (retval < 0)
@@ -125,6 +122,7 @@ static int probe_st5481(struct usb_interface *intf,
  err_usb:
 	st5481_release_usb(adapter);
  err:
+	kfree(adapter);
 	return -EIO;
 }
 
@@ -142,8 +140,6 @@ static void disconnect_st5481(struct usb_interface *intf)
 	if (!adapter)
 		return;
 	
-	list_del(&adapter->list);
-
 	st5481_stop(adapter);
 	st5481_release_b(&adapter->bcs[1]);
 	st5481_release_b(&adapter->bcs[0]);
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index 10d41c5d73e..159e8fa00fd 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -470,7 +470,7 @@ void st5481_release_isocpipes(struct urb* urb[2])
 
 /*
  * Decode frames received on the B/D channel.
- * Note that this function will be called continously
+ * Note that this function will be called continuously
  * with 64Kbit/s / 16Kbit/s of data and hence it will be 
  * called 50 times per second with 20 ISOC descriptors. 
  * Called at interrupt.
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 282a4467ef1..360f9ec7c80 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -9,7 +9,7 @@
     Also inspired by ELSA PCMCIA driver 
     by Klaus Lichtenwalder <Lichtenwalder@ACM.org>
     
-    Extentions to new hisax_pcmcia by Karsten Keil
+    Extensions to new hisax_pcmcia by Karsten Keil
 
     minor changes to be compatible with kernel 2.4.x
     by Jan.Schubert@GMX.li
@@ -111,12 +111,10 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
 
 static int __devinit teles_cs_config(struct pcmcia_device *link)
 {
-    local_info_t *dev;
     int i;
     IsdnCard_t icard;
 
     dev_dbg(&link->dev, "teles_config(0x%p)\n", link);
-    dev = link->priv;
 
     i = pcmcia_loop_config(link, teles_cs_configcheck, NULL);
     if (i != 0)
diff --git a/drivers/isdn/hysdn/hysdn_proclog.c b/drivers/isdn/hysdn/hysdn_proclog.c
index 2ee93d04b2d..236cc7dadfd 100644
--- a/drivers/isdn/hysdn/hysdn_proclog.c
+++ b/drivers/isdn/hysdn/hysdn_proclog.c
@@ -155,7 +155,6 @@ put_log_buffer(hysdn_card * card, char *cp)
 static ssize_t
 hysdn_log_write(struct file *file, const char __user *buf, size_t count, loff_t * off)
 {
-	unsigned long u = 0;
 	int rc;
 	unsigned char valbuf[128];
 	hysdn_card *card = file->private_data;
@@ -167,12 +166,10 @@ hysdn_log_write(struct file *file, const char __user *buf, size_t count, loff_t
 
 	valbuf[count] = 0;	/* terminating 0 */
 
-	rc = strict_strtoul(valbuf, 0, &u);
-
-	if (rc == 0) {
-		card->debug_flags = u;	/* remember debug flags */
-		hysdn_addlog(card, "debug set to 0x%lx", card->debug_flags);
-	}
+	rc = kstrtoul(valbuf, 0, &card->debug_flags);
+	if (rc < 0)
+		return rc;
+	hysdn_addlog(card, "debug set to 0x%lx", card->debug_flags);
 	return (count);
 }				/* hysdn_log_write */
 
diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c
index 81db4a190d4..3674d30d6a0 100644
--- a/drivers/isdn/hysdn/hysdn_sched.c
+++ b/drivers/isdn/hysdn/hysdn_sched.c
@@ -143,7 +143,7 @@ hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
 /* send one config line to the card and return 0 if successful, otherwise a */
 /* negative error code.                                                      */
 /* The function works with timeouts perhaps not giving the greatest speed    */
-/* sending the line, but this should be meaningless beacuse only some lines  */
+/* sending the line, but this should be meaningless because only some lines  */
 /* are to be sent and this happens very seldom.                              */
 /*****************************************************************************/
 int
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 15632bd2f64..6ed82add6ff 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -399,13 +399,8 @@ isdn_all_eaz(int di, int ch)
 #include <linux/isdn/capicmd.h>
 
 static int
-isdn_capi_rec_hl_msg(capi_msg *cm) {
-	
-	int di;
-	int ch;
-	
-	di = (cm->adr.Controller & 0x7f) -1;
-	ch = isdn_dc2minor(di, (cm->adr.Controller>>8)& 0x7f);
+isdn_capi_rec_hl_msg(capi_msg *cm)
+{
 	switch(cm->Command) {
 		case CAPI_FACILITY:
 			/* in the moment only handled in tty */
@@ -1278,7 +1273,6 @@ isdn_ioctl(struct file *file, uint cmd, ulong arg)
 	uint minor = iminor(file->f_path.dentry->d_inode);
 	isdn_ctrl c;
 	int drvidx;
-	int chidx;
 	int ret;
 	int i;
 	char __user *p;
@@ -1340,7 +1334,6 @@ isdn_ioctl(struct file *file, uint cmd, ulong arg)
 		drvidx = isdn_minor2drv(minor);
 		if (drvidx < 0)
 			return -ENODEV;
-		chidx = isdn_minor2chan(minor);
 		if (!(dev->drv[drvidx]->flags & DRV_FLAG_RUNNING))
 			return -ENODEV;
 		return 0;
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index afeede7ee29..97988111e45 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1530,7 +1530,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data)
 		printk (KERN_WARNING
 				"UPDOWN: Line protocol on Interface %s,"
 				" changed state to down\n", lp->netdev->dev->name);
-		/* should stop routing higher-level data accross */
+		/* should stop routing higher-level data across */
 	} else if ((!lp->cisco_line_state) &&
 		(myseq_diff >= 0) && (myseq_diff <= 2)) {
 		/* line down -> up */
@@ -1538,7 +1538,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data)
 		printk (KERN_WARNING
 				"UPDOWN: Line protocol on Interface %s,"
 				" changed state to up\n", lp->netdev->dev->name);
-		/* restart routing higher-level data accross */
+		/* restart routing higher-level data across */
 	}
 
 	if (lp->cisco_debserint)
@@ -1678,7 +1678,6 @@ isdn_net_ciscohdlck_slarp_in(isdn_net_local *lp, struct sk_buff *skb)
 	u32 your_seq;
 	__be32 local;
 	__be32 *addr, *mask;
-	u16 unused;
 
 	if (skb->len < 14)
 		return;
@@ -1722,7 +1721,6 @@ isdn_net_ciscohdlck_slarp_in(isdn_net_local *lp, struct sk_buff *skb)
 		lp->cisco_last_slarp_in = jiffies;
 		my_seq = be32_to_cpup((__be32 *)(p + 0));
 		your_seq = be32_to_cpup((__be32 *)(p + 4));
-		unused = be16_to_cpup((__be16 *)(p + 8));
 		p += 10;
 		lp->cisco_yourseq = my_seq;
 		lp->cisco_mineseen = your_seq;
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index 9e8162c80bb..1b002b0002a 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -1514,7 +1514,7 @@ int isdn_ppp_autodial_filter(struct sk_buff *skb, isdn_net_local *lp)
 #define MP_LONGSEQ_MAXBIT	((MP_LONGSEQ_MASK+1)>>1)
 #define MP_SHORTSEQ_MAXBIT	((MP_SHORTSEQ_MASK+1)>>1)
 
-/* sequence-wrap safe comparisions (for long sequence)*/ 
+/* sequence-wrap safe comparisons (for long sequence)*/
 #define MP_LT(a,b)	((a-b)&MP_LONGSEQ_MAXBIT)
 #define MP_LE(a,b) 	!((b-a)&MP_LONGSEQ_MAXBIT)
 #define MP_GT(a,b) 	((b-a)&MP_LONGSEQ_MAXBIT)
@@ -1746,7 +1746,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp,
 		 * then next fragment should be the start of new reassembly
 		 * if sequence is contiguous, but we haven't reassembled yet,
 		 * keep going.
-		 * if sequence is not contiguous, either clear everyting
+		 * if sequence is not contiguous, either clear everything
 		 * below low watermark and set start to the next frag or
 		 * clear start ptr.
 		 */ 
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3d88f15aa21..d8504279e50 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -792,7 +792,7 @@ isdn_tty_suspend(char *id, modem_info * info, atemu * m)
 }
 
 /* isdn_tty_resume() tries to resume a suspended call
- * setup of the lower levels before that. unfortunatly here is no
+ * setup of the lower levels before that. unfortunately here is no
  * checking for compatibility of used protocols implemented by Q931
  * It does the same things like isdn_tty_dial, the last command
  * is different, may be we can merge it.
@@ -998,7 +998,6 @@ isdn_tty_change_speed(modem_info * info)
 {
 	uint cflag,
 	 cval,
-	 fcr,
 	 quot;
 	int i;
 
@@ -1037,7 +1036,6 @@ isdn_tty_change_speed(modem_info * info)
 		cval |= UART_LCR_PARITY;
 	if (!(cflag & PARODD))
 		cval |= UART_LCR_EPAR;
-	fcr = 0;
 
 	/* CTS flow control flag and modem status interrupts */
 	if (cflag & CRTSCTS) {
diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index b8a1098b66e..d497db0a26d 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -954,7 +954,7 @@ isdnloop_parse_cmd(isdnloop_card * card)
 /*
  * Put command-strings into the of the 'card'. In reality, execute them
  * right in place by calling isdnloop_parse_cmd(). Also copy every
- * command to the read message ringbuffer, preceeding it with a '>'.
+ * command to the read message ringbuffer, preceding it with a '>'.
  * These mesagges can be read at /dev/isdnctrl.
  *
  * Parameter:
diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h
index 18af86879c0..8549431430f 100644
--- a/drivers/isdn/mISDN/dsp.h
+++ b/drivers/isdn/mISDN/dsp.h
@@ -21,7 +21,7 @@
 /* options may be:
  *
  * bit 0 = use ulaw instead of alaw
- * bit 1 = enable hfc hardware accelleration for all channels
+ * bit 1 = enable hfc hardware acceleration for all channels
  *
  */
 #define DSP_OPT_ULAW		(1<<0)
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index 309bacf1fad..4d395dea32f 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -1513,7 +1513,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 	/* -> if echo is NOT enabled */
 	if (!dsp->echo.software) {
 		/*
-		 * -> substract rx-data from conf-data,
+		 * -> subtract rx-data from conf-data,
 		 * if tx-data is available, mix
 		 */
 		while (r != rr && t != tt) {
@@ -1572,7 +1572,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 send_packet:
 	/*
 	 * send tx-data if enabled - don't filter,
-	 * becuase we want what we send, not what we filtered
+	 * because we want what we send, not what we filtered
 	 */
 	if (dsp->tx_data) {
 		if (tx_data_only) {
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 6f5b5486428..2877291a9ed 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -115,7 +115,7 @@
  *
  * The CMX has special functions for conferences with one, two and more
  * members. It will allow different types of data flow. Receive and transmit
- * data to/form upper layer may be swithed on/off individually without loosing
+ * data to/form upper layer may be swithed on/off individually without losing
  * features of CMX, Tones and DTMF.
  *
  * Echo Cancellation: Sometimes we like to cancel echo from the interface.
@@ -127,9 +127,9 @@
  *
  * If all used features can be realized in hardware, and if transmit and/or
  * receive data ist disabled, the card may not send/receive any data at all.
- * Not receiving is usefull if only announcements are played. Not sending is
- * usefull if an answering machine records audio. Not sending and receiving is
- * usefull during most states of the call. If supported by hardware, tones
+ * Not receiving is useful if only announcements are played. Not sending is
+ * useful if an answering machine records audio. Not sending and receiving is
+ * useful during most states of the call. If supported by hardware, tones
  * will be played without cpu load. Small PBXs and NT-Mode applications will
  * not need expensive hardware when processing calls.
  *
diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c
index 9ae2d33b06f..5b484c3f4af 100644
--- a/drivers/isdn/mISDN/dsp_dtmf.c
+++ b/drivers/isdn/mISDN/dsp_dtmf.c
@@ -106,7 +106,7 @@ void dsp_dtmf_hardware(struct dsp *dsp)
  * tested it allot. it even works with very short tones (40ms). the only
  * disadvantage is, that it doesn't work good with different volumes of both
  * tones. this will happen, if accoustically coupled dialers are used.
- * it sometimes detects tones during speach, which is normal for decoders.
+ * it sometimes detects tones during speech, which is normal for decoders.
  * use sequences to given commands during calls.
  *
  * dtmf - points to a structure of the current dtmf state
@@ -244,7 +244,7 @@ coefficients:
 		if (result[i] < tresh) {
 			lowgroup = -1;
 			highgroup = -1;
-			break;  /* noise inbetween */
+			break;  /* noise in between */
 		}
 		/* good level found. This is allowed only one time per group */
 		if (i < NCOEFF/2) {
diff --git a/drivers/isdn/mISDN/dsp_tones.c b/drivers/isdn/mISDN/dsp_tones.c
index 7dbe54ed1de..4e4440e8bae 100644
--- a/drivers/isdn/mISDN/dsp_tones.c
+++ b/drivers/isdn/mISDN/dsp_tones.c
@@ -394,7 +394,7 @@ void dsp_tone_copy(struct dsp *dsp, u8 *data, int len)
 	while (len) {
 		/* find sample to start with */
 		while (42) {
-			/* warp arround */
+			/* wrap around */
 			if (!pat->seq[index]) {
 				count = 0;
 				index = 0;
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index bd526f664a3..22f8ec8b924 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -179,7 +179,7 @@ NOTE: A value of 0 equals 256 bytes of data.
 - Time Base = Timestamp of first sample in frame
 The "Time Base" is used to rearange packets and to detect packet loss.
 The 16 bits are sent in network order (MSB first) and count 1/8000 th of a
-second. This causes a wrap arround each 8,192 seconds. There is no requirement
+second. This causes a wrap around each 8,192 seconds. There is no requirement
 for the initial "Time Base", but 0 should be used for the first packet.
 In case of HDLC data, this timestamp counts the packet or byte number.
 
@@ -205,7 +205,7 @@ On Demand:
 
 If the ondemand parameter is given, the remote IP is set to 0 on timeout.
 This will stop keepalive traffic to remote. If the remote is online again,
-traffic will continue to the remote address. This is usefull for road warriors.
+traffic will continue to the remote address. This is useful for road warriors.
 This feature only works with ID set, otherwhise it is highly unsecure.
 
 
@@ -590,7 +590,7 @@ multiframe:
 			return;
 		}
 	} else
-		mlen = len-2; /* single frame, substract timebase */
+		mlen = len-2; /* single frame, subtract timebase */
 
 	if (len < 2) {
 		printk(KERN_WARNING "%s: packet error - packet too short, time "
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index 4ae75053c9d..5bc00156315 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -1640,7 +1640,7 @@ l2_tei_remove(struct FsmInst *fi, int event, void *arg)
 }
 
 static void
-l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st14_persistent_da(struct FsmInst *fi, int event, void *arg)
 {
 	struct layer2 *l2 = fi->userdata;
 	struct sk_buff *skb = arg;
@@ -1654,7 +1654,7 @@ l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg)
 }
 
 static void
-l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st5_persistent_da(struct FsmInst *fi, int event, void *arg)
 {
 	struct layer2 *l2 = fi->userdata;
 	struct sk_buff *skb = arg;
@@ -1671,7 +1671,7 @@ l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg)
 }
 
 static void
-l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_st6_persistent_da(struct FsmInst *fi, int event, void *arg)
 {
 	struct layer2 *l2 = fi->userdata;
 	struct sk_buff *skb = arg;
@@ -1685,7 +1685,7 @@ l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg)
 }
 
 static void
-l2_persistant_da(struct FsmInst *fi, int event, void *arg)
+l2_persistent_da(struct FsmInst *fi, int event, void *arg)
 {
 	struct layer2 *l2 = fi->userdata;
 	struct sk_buff *skb = arg;
@@ -1829,14 +1829,14 @@ static struct FsmNode L2FnList[] =
 	{ST_L2_6, EV_L2_FRAME_ERROR, l2_frame_error},
 	{ST_L2_7, EV_L2_FRAME_ERROR, l2_frame_error_reest},
 	{ST_L2_8, EV_L2_FRAME_ERROR, l2_frame_error_reest},
-	{ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistant_da},
+	{ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistent_da},
 	{ST_L2_2, EV_L1_DEACTIVATE, l2_st24_tei_remove},
 	{ST_L2_3, EV_L1_DEACTIVATE, l2_st3_tei_remove},
-	{ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistant_da},
-	{ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistant_da},
-	{ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistant_da},
-	{ST_L2_7, EV_L1_DEACTIVATE, l2_persistant_da},
-	{ST_L2_8, EV_L1_DEACTIVATE, l2_persistant_da},
+	{ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistent_da},
+	{ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistent_da},
+	{ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistent_da},
+	{ST_L2_7, EV_L1_DEACTIVATE, l2_persistent_da},
+	{ST_L2_8, EV_L1_DEACTIVATE, l2_persistent_da},
 };
 
 static int
@@ -1864,7 +1864,7 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
 		psapi >>= 2;
 		ptei >>= 1;
 		if (psapi != l2->sapi) {
-			/* not our bussiness */
+			/* not our business */
 			if (*debug & DEBUG_L2)
 				printk(KERN_DEBUG "%s: sapi %d/%d mismatch\n",
 					__func__, psapi, l2->sapi);
@@ -1872,7 +1872,7 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
 			return 0;
 		}
 		if ((ptei != l2->tei) && (ptei != GROUP_TEI)) {
-			/* not our bussiness */
+			/* not our business */
 			if (*debug & DEBUG_L2)
 				printk(KERN_DEBUG "%s: tei %d/%d mismatch\n",
 					__func__, ptei, l2->tei);
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 7446d8b4282..8e325227b4c 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -457,6 +457,9 @@ static int data_sock_getsockopt(struct socket *sock, int level, int optname,
 	if (get_user(len, optlen))
 		return -EFAULT;
 
+	if (len != sizeof(char))
+		return -EINVAL;
+
 	switch (optname) {
 	case MISDN_TIME_STAMP:
 		if (_pms(sk)->cmask & MISDN_TIME_STAMP)
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index e7089a1f6cb..b37e6186d0f 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -349,6 +349,7 @@ static const struct i2c_device_id lm3530_id[] = {
 	{LM3530_NAME, 0},
 	{}
 };
+MODULE_DEVICE_TABLE(i2c, lm3530_id);
 
 static struct i2c_driver lm3530_i2c_driver = {
 	.probe = lm3530_probe,
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index afac338d502..5bf63af09dd 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -58,7 +58,7 @@ static struct i2c_driver pca9532_driver = {
 	.id_table = pca9532_id,
 };
 
-/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly,
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionally,
  * the clever Thecus people are using one pwm to drive the beeper. So,
  * as a compromise we average one pwm to the values requested by all
  * leds that are not ON/OFF.
diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c
index 3790816643b..8497f56f8e4 100644
--- a/drivers/leds/leds-regulator.c
+++ b/drivers/leds/leds-regulator.c
@@ -178,6 +178,10 @@ static int __devinit regulator_led_probe(struct platform_device *pdev)
 	led->cdev.flags |= LED_CORE_SUSPENDRESUME;
 	led->vcc = vcc;
 
+	/* to handle correctly an already enabled regulator */
+	if (regulator_is_enabled(led->vcc))
+		led->enabled = 1;
+
 	mutex_init(&led->mutex);
 	INIT_WORK(&led->work, led_work);
 
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index a0452327328..f14edd82cb0 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -215,13 +215,13 @@ static int wm8350_led_probe(struct platform_device *pdev)
 
 	isink = regulator_get(&pdev->dev, "led_isink");
 	if (IS_ERR(isink)) {
-		printk(KERN_ERR "%s: cant get ISINK\n", __func__);
+		printk(KERN_ERR "%s: can't get ISINK\n", __func__);
 		return PTR_ERR(isink);
 	}
 
 	dcdc = regulator_get(&pdev->dev, "led_vcc");
 	if (IS_ERR(dcdc)) {
-		printk(KERN_ERR "%s: cant get DCDC\n", __func__);
+		printk(KERN_ERR "%s: can't get DCDC\n", __func__);
 		ret = PTR_ERR(dcdc);
 		goto err_isink;
 	}
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index 0aaa0597a62..34ae49dc557 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -5,8 +5,10 @@ config LGUEST
 	---help---
 	  This is a very simple module which allows you to run
 	  multiple instances of the same Linux kernel, using the
-	  "lguest" command found in the Documentation/lguest directory.
+	  "lguest" command found in the Documentation/virtual/lguest
+	  directory.
+
 	  Note that "lguest" is pronounced to rhyme with "fell quest",
-	  not "rustyvisor".  See Documentation/lguest/lguest.txt.
+	  not "rustyvisor". See Documentation/virtual/lguest/lguest.txt.
 
 	  If unsure, say N.  If curious, say M.  If masochistic, say Y.
diff --git a/drivers/lguest/Makefile b/drivers/lguest/Makefile
index 7d463c26124..8ac947c7e7c 100644
--- a/drivers/lguest/Makefile
+++ b/drivers/lguest/Makefile
@@ -18,7 +18,7 @@ Mastery: PREFIX=M
 Beer:
 	@for f in Preparation Guest Drivers Launcher Host Switcher Mastery; do echo "{==- $$f -==}"; make -s $$f; done; echo "{==-==}"
 Preparation Preparation! Guest Drivers Launcher Host Switcher Mastery:
-	@sh ../../Documentation/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
+	@sh ../../Documentation/virtual/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
 Puppy:
 	@clear
 	@printf "      __  \n (___()'\`;\n /,    /\`\n \\\\\\\"--\\\\\\   \n"
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 3c781cdddda..948c547b8e9 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -130,7 +130,7 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
 	rcu_assign_pointer(lg->eventfds, new);
 
 	/*
-	 * We're not in a big hurry.  Wait until noone's looking at old
+	 * We're not in a big hurry.  Wait until no one's looking at old
 	 * version, then free it.
 	 */
 	synchronize_rcu();
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index 5396c67ba0a..09d72bb00d1 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -328,7 +328,7 @@ adbhid_input_keycode(int id, int scancode, int repeat)
 	switch (keycode) {
 	case ADB_KEY_CAPSLOCK:
 		if (!restore_capslock_events) {
-			/* Generate down/up events for CapsLock everytime. */
+			/* Generate down/up events for CapsLock every time. */
 			input_report_key(ahid->input, KEY_CAPSLOCK, 1);
 			input_sync(ahid->input);
 			input_report_key(ahid->input, KEY_CAPSLOCK, 0);
diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c
index bd6da7a9c55..b6ef8f59076 100644
--- a/drivers/macintosh/macio-adb.c
+++ b/drivers/macintosh/macio-adb.c
@@ -147,7 +147,7 @@ static int macio_adb_reset_bus(void)
 
 	/* Hrm... we may want to not lock interrupts for so
 	 * long ... oh well, who uses that chip anyway ? :)
-	 * That function will be seldomly used during boot
+	 * That function will be seldom used during boot
 	 * on rare machines, so...
 	 */
 	spin_lock_irqsave(&macio_lock, flags);
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 9e3e2c56659..02367308ff2 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -662,7 +662,7 @@ static void thermostat_create_files(void)
 		err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
 	if (err)
 		printk(KERN_WARNING
-			"Failed to create tempertaure attribute file(s).\n");
+			"Failed to create temperature attribute file(s).\n");
 }
 
 static void thermostat_remove_files(void)
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index bca2af2e376..bb8b722a978 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -91,7 +91,7 @@
  *
  *  Mar. 10, 2005 : 1.2
  *	- Add basic support for Xserve G5
- *	- Retreive pumps min/max from EEPROM image in device-tree (broken)
+ *	- Retrieve pumps min/max from EEPROM image in device-tree (broken)
  *	- Use min/max macros here or there
  *	- Latest darwin updated U3H min fan speed to 20% PWM
  *
@@ -153,7 +153,7 @@ static struct i2c_adapter *		u3_0;
 static struct i2c_adapter *		u3_1;
 static struct i2c_adapter *		k2;
 static struct i2c_client *		fcu;
-static struct cpu_pid_state		cpu_state[2];
+static struct cpu_pid_state		processor_state[2];
 static struct basckside_pid_params	backside_params;
 static struct backside_pid_state	backside_state;
 static struct drives_pid_state		drives_state;
@@ -375,7 +375,7 @@ static int read_smon_adc(struct cpu_pid_state *state, int chan)
 		rc = i2c_master_send(state->monitor, buf, 2);
 		if (rc <= 0)
 			goto error;
-		/* Wait for convertion */
+		/* Wait for conversion */
 		msleep(1);
 		/* Switch to data register */
 		buf[0] = 4;
@@ -664,8 +664,8 @@ static int read_eeprom(int cpu, struct mpu_data *out)
 
 static void fetch_cpu_pumps_minmax(void)
 {
-	struct cpu_pid_state *state0 = &cpu_state[0];
-	struct cpu_pid_state *state1 = &cpu_state[1];
+	struct cpu_pid_state *state0 = &processor_state[0];
+	struct cpu_pid_state *state1 = &processor_state[1];
 	u16 pump_min = 0, pump_max = 0xffff;
 	u16 tmp[4];
 
@@ -717,17 +717,17 @@ static ssize_t show_##name(struct device *dev, struct device_attribute *attr, ch
 	return sprintf(buf, "%d", data);			\
 }
 
-BUILD_SHOW_FUNC_FIX(cpu0_temperature, cpu_state[0].last_temp)
-BUILD_SHOW_FUNC_FIX(cpu0_voltage, cpu_state[0].voltage)
-BUILD_SHOW_FUNC_FIX(cpu0_current, cpu_state[0].current_a)
-BUILD_SHOW_FUNC_INT(cpu0_exhaust_fan_rpm, cpu_state[0].rpm)
-BUILD_SHOW_FUNC_INT(cpu0_intake_fan_rpm, cpu_state[0].intake_rpm)
+BUILD_SHOW_FUNC_FIX(cpu0_temperature, processor_state[0].last_temp)
+BUILD_SHOW_FUNC_FIX(cpu0_voltage, processor_state[0].voltage)
+BUILD_SHOW_FUNC_FIX(cpu0_current, processor_state[0].current_a)
+BUILD_SHOW_FUNC_INT(cpu0_exhaust_fan_rpm, processor_state[0].rpm)
+BUILD_SHOW_FUNC_INT(cpu0_intake_fan_rpm, processor_state[0].intake_rpm)
 
-BUILD_SHOW_FUNC_FIX(cpu1_temperature, cpu_state[1].last_temp)
-BUILD_SHOW_FUNC_FIX(cpu1_voltage, cpu_state[1].voltage)
-BUILD_SHOW_FUNC_FIX(cpu1_current, cpu_state[1].current_a)
-BUILD_SHOW_FUNC_INT(cpu1_exhaust_fan_rpm, cpu_state[1].rpm)
-BUILD_SHOW_FUNC_INT(cpu1_intake_fan_rpm, cpu_state[1].intake_rpm)
+BUILD_SHOW_FUNC_FIX(cpu1_temperature, processor_state[1].last_temp)
+BUILD_SHOW_FUNC_FIX(cpu1_voltage, processor_state[1].voltage)
+BUILD_SHOW_FUNC_FIX(cpu1_current, processor_state[1].current_a)
+BUILD_SHOW_FUNC_INT(cpu1_exhaust_fan_rpm, processor_state[1].rpm)
+BUILD_SHOW_FUNC_INT(cpu1_intake_fan_rpm, processor_state[1].intake_rpm)
 
 BUILD_SHOW_FUNC_FIX(backside_temperature, backside_state.last_temp)
 BUILD_SHOW_FUNC_INT(backside_fan_pwm, backside_state.pwm)
@@ -919,8 +919,8 @@ static void do_cpu_pid(struct cpu_pid_state *state, s32 temp, s32 power)
 
 static void do_monitor_cpu_combined(void)
 {
-	struct cpu_pid_state *state0 = &cpu_state[0];
-	struct cpu_pid_state *state1 = &cpu_state[1];
+	struct cpu_pid_state *state0 = &processor_state[0];
+	struct cpu_pid_state *state1 = &processor_state[1];
 	s32 temp0, power0, temp1, power1;
 	s32 temp_combi, power_combi;
 	int rc, intake, pump;
@@ -1150,7 +1150,7 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state)
 /*
  * Initialize the state structure for one CPU control loop
  */
-static int init_cpu_state(struct cpu_pid_state *state, int index)
+static int init_processor_state(struct cpu_pid_state *state, int index)
 {
 	int err;
 
@@ -1192,7 +1192,7 @@ static int init_cpu_state(struct cpu_pid_state *state, int index)
 		err |= device_create_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm);
 	}
 	if (err)
-		printk(KERN_WARNING "Failed to create some of the atribute"
+		printk(KERN_WARNING "Failed to create some of the attribute"
 			"files for CPU %d\n", index);
 
 	return 0;
@@ -1205,7 +1205,7 @@ static int init_cpu_state(struct cpu_pid_state *state, int index)
 /*
  * Dispose of the state data for one CPU control loop
  */
-static void dispose_cpu_state(struct cpu_pid_state *state)
+static void dispose_processor_state(struct cpu_pid_state *state)
 {
 	if (state->monitor == NULL)
 		return;
@@ -1804,9 +1804,9 @@ static int main_control_loop(void *x)
 		set_pwm_fan(SLOTS_FAN_PWM_INDEX, SLOTS_FAN_DEFAULT_PWM);
 
 	/* Initialize ADCs */
-	initialize_adc(&cpu_state[0]);
-	if (cpu_state[1].monitor != NULL)
-		initialize_adc(&cpu_state[1]);
+	initialize_adc(&processor_state[0]);
+	if (processor_state[1].monitor != NULL)
+		initialize_adc(&processor_state[1]);
 
 	fcu_tickle_ticks = FCU_TICKLE_TICKS;
 
@@ -1833,14 +1833,14 @@ static int main_control_loop(void *x)
 		if (cpu_pid_type == CPU_PID_TYPE_COMBINED)
 			do_monitor_cpu_combined();
 		else if (cpu_pid_type == CPU_PID_TYPE_RACKMAC) {
-			do_monitor_cpu_rack(&cpu_state[0]);
-			if (cpu_state[1].monitor != NULL)
-				do_monitor_cpu_rack(&cpu_state[1]);
+			do_monitor_cpu_rack(&processor_state[0]);
+			if (processor_state[1].monitor != NULL)
+				do_monitor_cpu_rack(&processor_state[1]);
 			// better deal with UP
 		} else {
-			do_monitor_cpu_split(&cpu_state[0]);
-			if (cpu_state[1].monitor != NULL)
-				do_monitor_cpu_split(&cpu_state[1]);
+			do_monitor_cpu_split(&processor_state[0]);
+			if (processor_state[1].monitor != NULL)
+				do_monitor_cpu_split(&processor_state[1]);
 			// better deal with UP
 		}
 		/* Then, the rest */
@@ -1885,8 +1885,8 @@ static int main_control_loop(void *x)
  */
 static void dispose_control_loops(void)
 {
-	dispose_cpu_state(&cpu_state[0]);
-	dispose_cpu_state(&cpu_state[1]);
+	dispose_processor_state(&processor_state[0]);
+	dispose_processor_state(&processor_state[1]);
 	dispose_backside_state(&backside_state);
 	dispose_drives_state(&drives_state);
 	dispose_slots_state(&slots_state);
@@ -1928,12 +1928,12 @@ static int create_control_loops(void)
 	/* Create control loops for everything. If any fail, everything
 	 * fails
 	 */
-	if (init_cpu_state(&cpu_state[0], 0))
+	if (init_processor_state(&processor_state[0], 0))
 		goto fail;
 	if (cpu_pid_type == CPU_PID_TYPE_COMBINED)
 		fetch_cpu_pumps_minmax();
 
-	if (cpu_count > 1 && init_cpu_state(&cpu_state[1], 1))
+	if (cpu_count > 1 && init_processor_state(&processor_state[1], 1))
 		goto fail;
 	if (init_backside_state(&backside_state))
 		goto fail;
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index d37819fd5ad..46c4e95f10d 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -45,7 +45,7 @@
 #include <asm/sections.h>
 #include <asm/macio.h>
 
-#define LOG_TEMP		0			/* continously log temperature */
+#define LOG_TEMP		0			/* continuously log temperature */
 
 static struct {
 	volatile int		running;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 8b021eb0d48..6cccd60c594 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -40,7 +40,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/freezer.h>
 #include <linux/syscalls.h>
 #include <linux/suspend.h>
@@ -2527,12 +2527,9 @@ void pmu_blink(int n)
 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 int pmu_sys_suspended;
 
-static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+static int pmu_syscore_suspend(void)
 {
-	if (state.event != PM_EVENT_SUSPEND || pmu_sys_suspended)
-		return 0;
-
-	/* Suspend PMU event interrupts */\
+	/* Suspend PMU event interrupts */
 	pmu_suspend();
 	pmu_sys_suspended = 1;
 
@@ -2544,12 +2541,12 @@ static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 	return 0;
 }
 
-static int pmu_sys_resume(struct sys_device *sysdev)
+static void pmu_syscore_resume(void)
 {
 	struct adb_request req;
 
 	if (!pmu_sys_suspended)
-		return 0;
+		return;
 
 	/* Tell PMU we are ready */
 	pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
@@ -2562,50 +2559,21 @@ static int pmu_sys_resume(struct sys_device *sysdev)
 	/* Resume PMU event interrupts */
 	pmu_resume();
 	pmu_sys_suspended = 0;
-
-	return 0;
 }
 
-#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
-
-static struct sysdev_class pmu_sysclass = {
-	.name = "pmu",
-};
-
-static struct sys_device device_pmu = {
-	.cls		= &pmu_sysclass,
-};
-
-static struct sysdev_driver driver_pmu = {
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
-	.suspend	= &pmu_sys_suspend,
-	.resume		= &pmu_sys_resume,
-#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
+static struct syscore_ops pmu_syscore_ops = {
+	.suspend = pmu_syscore_suspend,
+	.resume = pmu_syscore_resume,
 };
 
-static int __init init_pmu_sysfs(void)
+static int pmu_syscore_register(void)
 {
-	int rc;
+	register_syscore_ops(&pmu_syscore_ops);
 
-	rc = sysdev_class_register(&pmu_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering PMU sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_pmu);
-	if (rc) {
-		printk(KERN_ERR "Failed registering PMU sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&pmu_sysclass, &driver_pmu);
-	if (rc) {
-		printk(KERN_ERR "Failed registering PMU sys driver\n");
-		return -ENODEV;
-	}
 	return 0;
 }
-
-subsys_initcall(init_pmu_sysfs);
+subsys_initcall(pmu_syscore_register);
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 
 EXPORT_SYMBOL(pmu_request);
 EXPORT_SYMBOL(pmu_queue_request);
diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h
index 931a7a7c379..d0aeaf46d93 100644
--- a/drivers/md/bitmap.h
+++ b/drivers/md/bitmap.h
@@ -45,7 +45,7 @@
  *
  * The counter counts pending write requests, plus the on-disk bit.
  * When the counter is '1' and the resync bits are clear, the on-disk
- * bit can be cleared aswell, thus setting the counter to 0.
+ * bit can be cleared as well, thus setting the counter to 0.
  * When we set a bit, or in the counter (to start a write), if the fields is
  * 0, we first set the disk bit and set the counter to 1.
  *
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 5ef136cdba9..e5d8904fc8f 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -390,13 +390,6 @@ static int raid_is_congested(struct dm_target_callbacks *cb, int bits)
 	return md_raid5_congested(&rs->md, bits);
 }
 
-static void raid_unplug(struct dm_target_callbacks *cb)
-{
-	struct raid_set *rs = container_of(cb, struct raid_set, callbacks);
-
-	md_raid5_kick_device(rs->md.private);
-}
-
 /*
  * Construct a RAID4/5/6 mapping:
  * Args:
@@ -487,7 +480,6 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	}
 
 	rs->callbacks.congested_fn = raid_is_congested;
-	rs->callbacks.unplug_fn = raid_unplug;
 	dm_table_add_target_callbacks(ti->table, &rs->callbacks);
 
 	return 0;
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index dad011aed0c..7771ed21218 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -419,7 +419,7 @@ void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio)
 	/*
 	 * Possible cases:
 	 *   1) DM_RH_DIRTY
-	 *   2) DM_RH_NOSYNC: was dirty, other preceeding writes failed
+	 *   2) DM_RH_NOSYNC: was dirty, other preceding writes failed
 	 *   3) DM_RH_RECOVERING: flushing pending writes
 	 * Either case, the region should have not been connected to list.
 	 */
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 416d4e258df..cb8380c9767 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -927,20 +927,80 @@ static int dm_table_build_index(struct dm_table *t)
 }
 
 /*
+ * Get a disk whose integrity profile reflects the table's profile.
+ * If %match_all is true, all devices' profiles must match.
+ * If %match_all is false, all devices must at least have an
+ * allocated integrity profile; but uninitialized is ok.
+ * Returns NULL if integrity support was inconsistent or unavailable.
+ */
+static struct gendisk * dm_table_get_integrity_disk(struct dm_table *t,
+						    bool match_all)
+{
+	struct list_head *devices = dm_table_get_devices(t);
+	struct dm_dev_internal *dd = NULL;
+	struct gendisk *prev_disk = NULL, *template_disk = NULL;
+
+	list_for_each_entry(dd, devices, list) {
+		template_disk = dd->dm_dev.bdev->bd_disk;
+		if (!blk_get_integrity(template_disk))
+			goto no_integrity;
+		if (!match_all && !blk_integrity_is_initialized(template_disk))
+			continue; /* skip uninitialized profiles */
+		else if (prev_disk &&
+			 blk_integrity_compare(prev_disk, template_disk) < 0)
+			goto no_integrity;
+		prev_disk = template_disk;
+	}
+
+	return template_disk;
+
+no_integrity:
+	if (prev_disk)
+		DMWARN("%s: integrity not set: %s and %s profile mismatch",
+		       dm_device_name(t->md),
+		       prev_disk->disk_name,
+		       template_disk->disk_name);
+	return NULL;
+}
+
+/*
  * Register the mapped device for blk_integrity support if
- * the underlying devices support it.
+ * the underlying devices have an integrity profile.  But all devices
+ * may not have matching profiles (checking all devices isn't reliable
+ * during table load because this table may use other DM device(s) which
+ * must be resumed before they will have an initialized integity profile).
+ * Stacked DM devices force a 2 stage integrity profile validation:
+ * 1 - during load, validate all initialized integrity profiles match
+ * 2 - during resume, validate all integrity profiles match
  */
 static int dm_table_prealloc_integrity(struct dm_table *t, struct mapped_device *md)
 {
-	struct list_head *devices = dm_table_get_devices(t);
-	struct dm_dev_internal *dd;
+	struct gendisk *template_disk = NULL;
 
-	list_for_each_entry(dd, devices, list)
-		if (bdev_get_integrity(dd->dm_dev.bdev)) {
-			t->integrity_supported = 1;
-			return blk_integrity_register(dm_disk(md), NULL);
-		}
+	template_disk = dm_table_get_integrity_disk(t, false);
+	if (!template_disk)
+		return 0;
 
+	if (!blk_integrity_is_initialized(dm_disk(md))) {
+		t->integrity_supported = 1;
+		return blk_integrity_register(dm_disk(md), NULL);
+	}
+
+	/*
+	 * If DM device already has an initalized integrity
+	 * profile the new profile should not conflict.
+	 */
+	if (blk_integrity_is_initialized(template_disk) &&
+	    blk_integrity_compare(dm_disk(md), template_disk) < 0) {
+		DMWARN("%s: conflict with existing integrity profile: "
+		       "%s profile mismatch",
+		       dm_device_name(t->md),
+		       template_disk->disk_name);
+		return 1;
+	}
+
+	/* Preserve existing initialized integrity profile */
+	t->integrity_supported = 1;
 	return 0;
 }
 
@@ -1094,41 +1154,27 @@ combine_limits:
 
 /*
  * Set the integrity profile for this device if all devices used have
- * matching profiles.
+ * matching profiles.  We're quite deep in the resume path but still
+ * don't know if all devices (particularly DM devices this device
+ * may be stacked on) have matching profiles.  Even if the profiles
+ * don't match we have no way to fail (to resume) at this point.
  */
 static void dm_table_set_integrity(struct dm_table *t)
 {
-	struct list_head *devices = dm_table_get_devices(t);
-	struct dm_dev_internal *prev = NULL, *dd = NULL;
+	struct gendisk *template_disk = NULL;
 
 	if (!blk_get_integrity(dm_disk(t->md)))
 		return;
 
-	list_for_each_entry(dd, devices, list) {
-		if (prev &&
-		    blk_integrity_compare(prev->dm_dev.bdev->bd_disk,
-					  dd->dm_dev.bdev->bd_disk) < 0) {
-			DMWARN("%s: integrity not set: %s and %s mismatch",
-			       dm_device_name(t->md),
-			       prev->dm_dev.bdev->bd_disk->disk_name,
-			       dd->dm_dev.bdev->bd_disk->disk_name);
-			goto no_integrity;
-		}
-		prev = dd;
+	template_disk = dm_table_get_integrity_disk(t, true);
+	if (!template_disk &&
+	    blk_integrity_is_initialized(dm_disk(t->md))) {
+		DMWARN("%s: device no longer has a valid integrity profile",
+		       dm_device_name(t->md));
+		return;
 	}
-
-	if (!prev || !bdev_get_integrity(prev->dm_dev.bdev))
-		goto no_integrity;
-
 	blk_integrity_register(dm_disk(t->md),
-			       bdev_get_integrity(prev->dm_dev.bdev));
-
-	return;
-
-no_integrity:
-	blk_integrity_register(dm_disk(t->md), NULL);
-
-	return;
+			       blk_get_integrity(template_disk));
 }
 
 void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c
index 339fdc67075..23078dabb6d 100644
--- a/drivers/md/faulty.c
+++ b/drivers/md/faulty.c
@@ -30,7 +30,7 @@
  *
  * Different modes can be active at a time, but only
  * one can be set at array creation.  Others can be added later.
- * A mode can be one-shot or recurrent with the recurrance being
+ * A mode can be one-shot or recurrent with the recurrence being
  * once in every N requests.
  * The bottom 5 bits of the "layout" indicate the mode.  The
  * remainder indicate a period, or 0 for one-shot.
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8b66e04c2ea..7d6f7f18a92 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -447,48 +447,59 @@ EXPORT_SYMBOL(md_flush_request);
 
 /* Support for plugging.
  * This mirrors the plugging support in request_queue, but does not
- * require having a whole queue
+ * require having a whole queue or request structures.
+ * We allocate an md_plug_cb for each md device and each thread it gets
+ * plugged on.  This links tot the private plug_handle structure in the
+ * personality data where we keep a count of the number of outstanding
+ * plugs so other code can see if a plug is active.
  */
-static void plugger_work(struct work_struct *work)
-{
-	struct plug_handle *plug =
-		container_of(work, struct plug_handle, unplug_work);
-	plug->unplug_fn(plug);
-}
-static void plugger_timeout(unsigned long data)
-{
-	struct plug_handle *plug = (void *)data;
-	kblockd_schedule_work(NULL, &plug->unplug_work);
-}
-void plugger_init(struct plug_handle *plug,
-		  void (*unplug_fn)(struct plug_handle *))
-{
-	plug->unplug_flag = 0;
-	plug->unplug_fn = unplug_fn;
-	init_timer(&plug->unplug_timer);
-	plug->unplug_timer.function = plugger_timeout;
-	plug->unplug_timer.data = (unsigned long)plug;
-	INIT_WORK(&plug->unplug_work, plugger_work);
-}
-EXPORT_SYMBOL_GPL(plugger_init);
+struct md_plug_cb {
+	struct blk_plug_cb cb;
+	mddev_t *mddev;
+};
 
-void plugger_set_plug(struct plug_handle *plug)
+static void plugger_unplug(struct blk_plug_cb *cb)
 {
-	if (!test_and_set_bit(PLUGGED_FLAG, &plug->unplug_flag))
-		mod_timer(&plug->unplug_timer, jiffies + msecs_to_jiffies(3)+1);
+	struct md_plug_cb *mdcb = container_of(cb, struct md_plug_cb, cb);
+	if (atomic_dec_and_test(&mdcb->mddev->plug_cnt))
+		md_wakeup_thread(mdcb->mddev->thread);
+	kfree(mdcb);
 }
-EXPORT_SYMBOL_GPL(plugger_set_plug);
 
-int plugger_remove_plug(struct plug_handle *plug)
+/* Check that an unplug wakeup will come shortly.
+ * If not, wakeup the md thread immediately
+ */
+int mddev_check_plugged(mddev_t *mddev)
 {
-	if (test_and_clear_bit(PLUGGED_FLAG, &plug->unplug_flag)) {
-		del_timer(&plug->unplug_timer);
-		return 1;
-	} else
+	struct blk_plug *plug = current->plug;
+	struct md_plug_cb *mdcb;
+
+	if (!plug)
 		return 0;
-}
-EXPORT_SYMBOL_GPL(plugger_remove_plug);
 
+	list_for_each_entry(mdcb, &plug->cb_list, cb.list) {
+		if (mdcb->cb.callback == plugger_unplug &&
+		    mdcb->mddev == mddev) {
+			/* Already on the list, move to top */
+			if (mdcb != list_first_entry(&plug->cb_list,
+						    struct md_plug_cb,
+						    cb.list))
+				list_move(&mdcb->cb.list, &plug->cb_list);
+			return 1;
+		}
+	}
+	/* Not currently on the callback list */
+	mdcb = kmalloc(sizeof(*mdcb), GFP_ATOMIC);
+	if (!mdcb)
+		return 0;
+
+	mdcb->mddev = mddev;
+	mdcb->cb.callback = plugger_unplug;
+	atomic_inc(&mddev->plug_cnt);
+	list_add(&mdcb->cb.list, &plug->cb_list);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(mddev_check_plugged);
 
 static inline mddev_t *mddev_get(mddev_t *mddev)
 {
@@ -538,6 +549,7 @@ void mddev_init(mddev_t *mddev)
 	atomic_set(&mddev->active, 1);
 	atomic_set(&mddev->openers, 0);
 	atomic_set(&mddev->active_io, 0);
+	atomic_set(&mddev->plug_cnt, 0);
 	spin_lock_init(&mddev->write_lock);
 	atomic_set(&mddev->flush_pending, 0);
 	init_waitqueue_head(&mddev->sb_wait);
@@ -3158,6 +3170,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len)
 	mddev->layout = mddev->new_layout;
 	mddev->chunk_sectors = mddev->new_chunk_sectors;
 	mddev->delta_disks = 0;
+	mddev->degraded = 0;
 	if (mddev->pers->sync_request == NULL) {
 		/* this is now an array without redundancy, so
 		 * it must always be in_sync
@@ -4723,7 +4736,6 @@ static void md_clean(mddev_t *mddev)
 	mddev->bitmap_info.chunksize = 0;
 	mddev->bitmap_info.daemon_sleep = 0;
 	mddev->bitmap_info.max_write_behind = 0;
-	mddev->plug = NULL;
 }
 
 static void __md_stop_writes(mddev_t *mddev)
@@ -6266,7 +6278,7 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev)
 	 * rt is a sector_t, so could be 32bit or 64bit.
 	 * So we divide before multiply in case it is 32bit and close
 	 * to the limit.
-	 * We scale the divisor (db) by 32 to avoid loosing precision
+	 * We scale the divisor (db) by 32 to avoid losing precision
 	 * near the end of resync when the number of remaining sectors
 	 * is close to 'db'.
 	 * We then divide rt by 32 after multiplying by db to compensate.
@@ -6688,12 +6700,6 @@ int md_allow_write(mddev_t *mddev)
 }
 EXPORT_SYMBOL_GPL(md_allow_write);
 
-void md_unplug(mddev_t *mddev)
-{
-	if (mddev->plug)
-		mddev->plug->unplug_fn(mddev->plug);
-}
-
 #define SYNC_MARKS	10
 #define	SYNC_MARK_STEP	(3*HZ)
 void md_do_sync(mddev_t *mddev)
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 12215d437fc..0b1fd3f1d85 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -29,26 +29,6 @@
 typedef struct mddev_s mddev_t;
 typedef struct mdk_rdev_s mdk_rdev_t;
 
-/* generic plugging support - like that provided with request_queue,
- * but does not require a request_queue
- */
-struct plug_handle {
-	void			(*unplug_fn)(struct plug_handle *);
-	struct timer_list	unplug_timer;
-	struct work_struct	unplug_work;
-	unsigned long		unplug_flag;
-};
-#define	PLUGGED_FLAG 1
-void plugger_init(struct plug_handle *plug,
-		  void (*unplug_fn)(struct plug_handle *));
-void plugger_set_plug(struct plug_handle *plug);
-int plugger_remove_plug(struct plug_handle *plug);
-static inline void plugger_flush(struct plug_handle *plug)
-{
-	del_timer_sync(&plug->unplug_timer);
-	cancel_work_sync(&plug->unplug_work);
-}
-
 /*
  * MD's 'extended' device
  */
@@ -94,7 +74,7 @@ struct mdk_rdev_s
 #define	In_sync		2		/* device is in_sync with rest of array */
 #define	WriteMostly	4		/* Avoid reading if at all possible */
 #define	AutoDetected	7		/* added by auto-detect */
-#define Blocked		8		/* An error occured on an externally
+#define Blocked		8		/* An error occurred on an externally
 					 * managed array, don't allow writes
 					 * until it is cleared */
 	wait_queue_head_t blocked_wait;
@@ -199,6 +179,9 @@ struct mddev_s
 	int				delta_disks, new_level, new_layout;
 	int				new_chunk_sectors;
 
+	atomic_t			plug_cnt;	/* If device is expecting
+							 * more bios soon.
+							 */
 	struct mdk_thread_s		*thread;	/* management thread */
 	struct mdk_thread_s		*sync_thread;	/* doing resync or reconstruct */
 	sector_t			curr_resync;	/* last block scheduled */
@@ -336,7 +319,6 @@ struct mddev_s
 	struct list_head		all_mddevs;
 
 	struct attribute_group		*to_remove;
-	struct plug_handle		*plug; /* if used by personality */
 
 	struct bio_set			*bio_set;
 
@@ -516,7 +498,6 @@ extern int md_integrity_register(mddev_t *mddev);
 extern void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
 extern int strict_strtoul_scaled(const char *cp, unsigned long *res, int scale);
 extern void restore_bitmap_write_access(struct file *file);
-extern void md_unplug(mddev_t *mddev);
 
 extern void mddev_init(mddev_t *mddev);
 extern int md_run(mddev_t *mddev);
@@ -530,4 +511,5 @@ extern struct bio *bio_clone_mddev(struct bio *bio, gfp_t gfp_mask,
 				   mddev_t *mddev);
 extern struct bio *bio_alloc_mddev(gfp_t gfp_mask, int nr_iovecs,
 				   mddev_t *mddev);
+extern int mddev_check_plugged(mddev_t *mddev);
 #endif /* _MD_MD_H */
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index c2a21ae56d9..2b7a7ff401d 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -565,12 +565,6 @@ static void flush_pending_writes(conf_t *conf)
 		spin_unlock_irq(&conf->device_lock);
 }
 
-static void md_kick_device(mddev_t *mddev)
-{
-	blk_flush_plug(current);
-	md_wakeup_thread(mddev->thread);
-}
-
 /* Barriers....
  * Sometimes we need to suspend IO while we do something else,
  * either some resync/recovery, or reconfigure the array.
@@ -600,7 +594,7 @@ static void raise_barrier(conf_t *conf)
 
 	/* Wait until no block IO is waiting */
 	wait_event_lock_irq(conf->wait_barrier, !conf->nr_waiting,
-			    conf->resync_lock, md_kick_device(conf->mddev));
+			    conf->resync_lock, );
 
 	/* block any new IO from starting */
 	conf->barrier++;
@@ -608,7 +602,7 @@ static void raise_barrier(conf_t *conf)
 	/* Now wait for all pending IO to complete */
 	wait_event_lock_irq(conf->wait_barrier,
 			    !conf->nr_pending && conf->barrier < RESYNC_DEPTH,
-			    conf->resync_lock, md_kick_device(conf->mddev));
+			    conf->resync_lock, );
 
 	spin_unlock_irq(&conf->resync_lock);
 }
@@ -630,7 +624,7 @@ static void wait_barrier(conf_t *conf)
 		conf->nr_waiting++;
 		wait_event_lock_irq(conf->wait_barrier, !conf->barrier,
 				    conf->resync_lock,
-				    md_kick_device(conf->mddev));
+				    );
 		conf->nr_waiting--;
 	}
 	conf->nr_pending++;
@@ -666,8 +660,7 @@ static void freeze_array(conf_t *conf)
 	wait_event_lock_irq(conf->wait_barrier,
 			    conf->nr_pending == conf->nr_queued+1,
 			    conf->resync_lock,
-			    ({ flush_pending_writes(conf);
-			       md_kick_device(conf->mddev); }));
+			    flush_pending_writes(conf));
 	spin_unlock_irq(&conf->resync_lock);
 }
 static void unfreeze_array(conf_t *conf)
@@ -729,6 +722,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
 	const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
 	const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
 	mdk_rdev_t *blocked_rdev;
+	int plugged;
 
 	/*
 	 * Register the new request and wait if the reconstruction
@@ -820,6 +814,8 @@ static int make_request(mddev_t *mddev, struct bio * bio)
 	 * inc refcount on their rdev.  Record them by setting
 	 * bios[x] to bio
 	 */
+	plugged = mddev_check_plugged(mddev);
+
 	disks = conf->raid_disks;
  retry_write:
 	blocked_rdev = NULL;
@@ -925,7 +921,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
 	/* In case raid1d snuck in to freeze_array */
 	wake_up(&conf->wait_barrier);
 
-	if (do_sync || !bitmap)
+	if (do_sync || !bitmap || !plugged)
 		md_wakeup_thread(mddev->thread);
 
 	return 0;
@@ -1516,13 +1512,16 @@ static void raid1d(mddev_t *mddev)
 	conf_t *conf = mddev->private;
 	struct list_head *head = &conf->retry_list;
 	mdk_rdev_t *rdev;
+	struct blk_plug plug;
 
 	md_check_recovery(mddev);
-	
+
+	blk_start_plug(&plug);
 	for (;;) {
 		char b[BDEVNAME_SIZE];
 
-		flush_pending_writes(conf);
+		if (atomic_read(&mddev->plug_cnt) == 0)
+			flush_pending_writes(conf);
 
 		spin_lock_irqsave(&conf->device_lock, flags);
 		if (list_empty(head)) {
@@ -1593,6 +1592,7 @@ static void raid1d(mddev_t *mddev)
 		}
 		cond_resched();
 	}
+	blk_finish_plug(&plug);
 }
 
 
@@ -2039,7 +2039,6 @@ static int stop(mddev_t *mddev)
 
 	md_unregister_thread(mddev->thread);
 	mddev->thread = NULL;
-	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
 	if (conf->r1bio_pool)
 		mempool_destroy(conf->r1bio_pool);
 	kfree(conf->mirrors);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index f7b62370b37..8e9462626ec 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -5,7 +5,7 @@
  *
  * RAID-10 support for md.
  *
- * Base on code in raid1.c.  See raid1.c for futher copyright information.
+ * Base on code in raid1.c.  See raid1.c for further copyright information.
  *
  *
  * This program is free software; you can redistribute it and/or modify
@@ -340,14 +340,14 @@ static void raid10_end_write_request(struct bio *bio, int error)
 
 /*
  * RAID10 layout manager
- * Aswell as the chunksize and raid_disks count, there are two
+ * As well as the chunksize and raid_disks count, there are two
  * parameters: near_copies and far_copies.
  * near_copies * far_copies must be <= raid_disks.
  * Normally one of these will be 1.
  * If both are 1, we get raid0.
  * If near_copies == raid_disks, we get raid1.
  *
- * Chunks are layed out in raid0 style with near_copies copies of the
+ * Chunks are laid out in raid0 style with near_copies copies of the
  * first chunk, followed by near_copies copies of the next chunk and
  * so on.
  * If far_copies > 1, then after 1/far_copies of the array has been assigned
@@ -634,12 +634,6 @@ static void flush_pending_writes(conf_t *conf)
 		spin_unlock_irq(&conf->device_lock);
 }
 
-static void md_kick_device(mddev_t *mddev)
-{
-	blk_flush_plug(current);
-	md_wakeup_thread(mddev->thread);
-}
-
 /* Barriers....
  * Sometimes we need to suspend IO while we do something else,
  * either some resync/recovery, or reconfigure the array.
@@ -669,15 +663,15 @@ static void raise_barrier(conf_t *conf, int force)
 
 	/* Wait until no block IO is waiting (unless 'force') */
 	wait_event_lock_irq(conf->wait_barrier, force || !conf->nr_waiting,
-			    conf->resync_lock, md_kick_device(conf->mddev));
+			    conf->resync_lock, );
 
 	/* block any new IO from starting */
 	conf->barrier++;
 
-	/* No wait for all pending IO to complete */
+	/* Now wait for all pending IO to complete */
 	wait_event_lock_irq(conf->wait_barrier,
 			    !conf->nr_pending && conf->barrier < RESYNC_DEPTH,
-			    conf->resync_lock, md_kick_device(conf->mddev));
+			    conf->resync_lock, );
 
 	spin_unlock_irq(&conf->resync_lock);
 }
@@ -698,7 +692,7 @@ static void wait_barrier(conf_t *conf)
 		conf->nr_waiting++;
 		wait_event_lock_irq(conf->wait_barrier, !conf->barrier,
 				    conf->resync_lock,
-				    md_kick_device(conf->mddev));
+				    );
 		conf->nr_waiting--;
 	}
 	conf->nr_pending++;
@@ -734,8 +728,8 @@ static void freeze_array(conf_t *conf)
 	wait_event_lock_irq(conf->wait_barrier,
 			    conf->nr_pending == conf->nr_queued+1,
 			    conf->resync_lock,
-			    ({ flush_pending_writes(conf);
-			       md_kick_device(conf->mddev); }));
+			    flush_pending_writes(conf));
+
 	spin_unlock_irq(&conf->resync_lock);
 }
 
@@ -762,6 +756,7 @@ static int make_request(mddev_t *mddev, struct bio * bio)
 	const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
 	unsigned long flags;
 	mdk_rdev_t *blocked_rdev;
+	int plugged;
 
 	if (unlikely(bio->bi_rw & REQ_FLUSH)) {
 		md_flush_request(mddev, bio);
@@ -870,6 +865,8 @@ static int make_request(mddev_t *mddev, struct bio * bio)
 	 * inc refcount on their rdev.  Record them by setting
 	 * bios[x] to bio
 	 */
+	plugged = mddev_check_plugged(mddev);
+
 	raid10_find_phys(conf, r10_bio);
  retry_write:
 	blocked_rdev = NULL;
@@ -946,9 +943,8 @@ static int make_request(mddev_t *mddev, struct bio * bio)
 	/* In case raid10d snuck in to freeze_array */
 	wake_up(&conf->wait_barrier);
 
-	if (do_sync || !mddev->bitmap)
+	if (do_sync || !mddev->bitmap || !plugged)
 		md_wakeup_thread(mddev->thread);
-
 	return 0;
 }
 
@@ -1640,9 +1636,11 @@ static void raid10d(mddev_t *mddev)
 	conf_t *conf = mddev->private;
 	struct list_head *head = &conf->retry_list;
 	mdk_rdev_t *rdev;
+	struct blk_plug plug;
 
 	md_check_recovery(mddev);
 
+	blk_start_plug(&plug);
 	for (;;) {
 		char b[BDEVNAME_SIZE];
 
@@ -1716,6 +1714,7 @@ static void raid10d(mddev_t *mddev)
 		}
 		cond_resched();
 	}
+	blk_finish_plug(&plug);
 }
 
 
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 2316ac2e8e2..944b1104d3b 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -17,8 +17,8 @@ struct r10_private_data_s {
 	spinlock_t		device_lock;
 
 	/* geometry */
-	int			near_copies;  /* number of copies layed out raid0 style */
-	int 			far_copies;   /* number of copies layed out
+	int			near_copies;  /* number of copies laid out raid0 style */
+	int 			far_copies;   /* number of copies laid out
 					       * at large strides across drives
 					       */
 	int			far_offset;   /* far_copies are offset by 1 stripe
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e867ee42b15..49bf5f89143 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -27,12 +27,12 @@
  *
  * We group bitmap updates into batches.  Each batch has a number.
  * We may write out several batches at once, but that isn't very important.
- * conf->bm_write is the number of the last batch successfully written.
- * conf->bm_flush is the number of the last batch that was closed to
+ * conf->seq_write is the number of the last batch successfully written.
+ * conf->seq_flush is the number of the last batch that was closed to
  *    new additions.
  * When we discover that we will need to write to any block in a stripe
  * (in add_stripe_bio) we update the in-memory bitmap and record in sh->bm_seq
- * the number of the batch it will be in. This is bm_flush+1.
+ * the number of the batch it will be in. This is seq_flush+1.
  * When we are ready to do a write, if that batch hasn't been written yet,
  *   we plug the array and queue the stripe for later.
  * When an unplug happens, we increment bm_flush, thus closing the current
@@ -199,14 +199,12 @@ static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh)
 		BUG_ON(!list_empty(&sh->lru));
 		BUG_ON(atomic_read(&conf->active_stripes)==0);
 		if (test_bit(STRIPE_HANDLE, &sh->state)) {
-			if (test_bit(STRIPE_DELAYED, &sh->state)) {
+			if (test_bit(STRIPE_DELAYED, &sh->state))
 				list_add_tail(&sh->lru, &conf->delayed_list);
-				plugger_set_plug(&conf->plug);
-			} else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
-				   sh->bm_seq - conf->seq_write > 0) {
+			else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
+				   sh->bm_seq - conf->seq_write > 0)
 				list_add_tail(&sh->lru, &conf->bitmap_list);
-				plugger_set_plug(&conf->plug);
-			} else {
+			else {
 				clear_bit(STRIPE_BIT_DELAY, &sh->state);
 				list_add_tail(&sh->lru, &conf->handle_list);
 			}
@@ -461,7 +459,7 @@ get_active_stripe(raid5_conf_t *conf, sector_t sector,
 						     < (conf->max_nr_stripes *3/4)
 						     || !conf->inactive_blocked),
 						    conf->device_lock,
-						    md_raid5_kick_device(conf));
+						    );
 				conf->inactive_blocked = 0;
 			} else
 				init_stripe(sh, sector, previous);
@@ -1470,7 +1468,7 @@ static int resize_stripes(raid5_conf_t *conf, int newsize)
 		wait_event_lock_irq(conf->wait_for_stripe,
 				    !list_empty(&conf->inactive_list),
 				    conf->device_lock,
-				    blk_flush_plug(current));
+				    );
 		osh = get_free_stripe(conf);
 		spin_unlock_irq(&conf->device_lock);
 		atomic_set(&nsh->count, 1);
@@ -3623,8 +3621,7 @@ static void raid5_activate_delayed(raid5_conf_t *conf)
 				atomic_inc(&conf->preread_active_stripes);
 			list_add_tail(&sh->lru, &conf->hold_list);
 		}
-	} else
-		plugger_set_plug(&conf->plug);
+	}
 }
 
 static void activate_bit_delay(raid5_conf_t *conf)
@@ -3641,21 +3638,6 @@ static void activate_bit_delay(raid5_conf_t *conf)
 	}
 }
 
-void md_raid5_kick_device(raid5_conf_t *conf)
-{
-	blk_flush_plug(current);
-	raid5_activate_delayed(conf);
-	md_wakeup_thread(conf->mddev->thread);
-}
-EXPORT_SYMBOL_GPL(md_raid5_kick_device);
-
-static void raid5_unplug(struct plug_handle *plug)
-{
-	raid5_conf_t *conf = container_of(plug, raid5_conf_t, plug);
-
-	md_raid5_kick_device(conf);
-}
-
 int md_raid5_congested(mddev_t *mddev, int bits)
 {
 	raid5_conf_t *conf = mddev->private;
@@ -3945,6 +3927,7 @@ static int make_request(mddev_t *mddev, struct bio * bi)
 	struct stripe_head *sh;
 	const int rw = bio_data_dir(bi);
 	int remaining;
+	int plugged;
 
 	if (unlikely(bi->bi_rw & REQ_FLUSH)) {
 		md_flush_request(mddev, bi);
@@ -3963,6 +3946,7 @@ static int make_request(mddev_t *mddev, struct bio * bi)
 	bi->bi_next = NULL;
 	bi->bi_phys_segments = 1;	/* over-loaded to count active stripes */
 
+	plugged = mddev_check_plugged(mddev);
 	for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
 		DEFINE_WAIT(w);
 		int disks, data_disks;
@@ -4057,7 +4041,7 @@ static int make_request(mddev_t *mddev, struct bio * bi)
 				 * add failed due to overlap.  Flush everything
 				 * and wait a while
 				 */
-				md_raid5_kick_device(conf);
+				md_wakeup_thread(mddev->thread);
 				release_stripe(sh);
 				schedule();
 				goto retry;
@@ -4077,6 +4061,9 @@ static int make_request(mddev_t *mddev, struct bio * bi)
 		}
 			
 	}
+	if (!plugged)
+		md_wakeup_thread(mddev->thread);
+
 	spin_lock_irq(&conf->device_lock);
 	remaining = raid5_dec_bi_phys_segments(bi);
 	spin_unlock_irq(&conf->device_lock);
@@ -4478,24 +4465,30 @@ static void raid5d(mddev_t *mddev)
 	struct stripe_head *sh;
 	raid5_conf_t *conf = mddev->private;
 	int handled;
+	struct blk_plug plug;
 
 	pr_debug("+++ raid5d active\n");
 
 	md_check_recovery(mddev);
 
+	blk_start_plug(&plug);
 	handled = 0;
 	spin_lock_irq(&conf->device_lock);
 	while (1) {
 		struct bio *bio;
 
-		if (conf->seq_flush != conf->seq_write) {
-			int seq = conf->seq_flush;
+		if (atomic_read(&mddev->plug_cnt) == 0 &&
+		    !list_empty(&conf->bitmap_list)) {
+			/* Now is a good time to flush some bitmap updates */
+			conf->seq_flush++;
 			spin_unlock_irq(&conf->device_lock);
 			bitmap_unplug(mddev->bitmap);
 			spin_lock_irq(&conf->device_lock);
-			conf->seq_write = seq;
+			conf->seq_write = conf->seq_flush;
 			activate_bit_delay(conf);
 		}
+		if (atomic_read(&mddev->plug_cnt) == 0)
+			raid5_activate_delayed(conf);
 
 		while ((bio = remove_bio_from_retry(conf))) {
 			int ok;
@@ -4525,6 +4518,7 @@ static void raid5d(mddev_t *mddev)
 	spin_unlock_irq(&conf->device_lock);
 
 	async_tx_issue_pending_all();
+	blk_finish_plug(&plug);
 
 	pr_debug("--- raid5d inactive\n");
 }
@@ -5141,8 +5135,6 @@ static int run(mddev_t *mddev)
 		       mdname(mddev));
 	md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
 
-	plugger_init(&conf->plug, raid5_unplug);
-	mddev->plug = &conf->plug;
 	if (mddev->queue) {
 		int chunk_size;
 		/* read-ahead size must cover two whole stripes, which
@@ -5159,7 +5151,6 @@ static int run(mddev_t *mddev)
 
 		mddev->queue->backing_dev_info.congested_data = mddev;
 		mddev->queue->backing_dev_info.congested_fn = raid5_congested;
-		mddev->queue->queue_lock = &conf->device_lock;
 
 		chunk_size = mddev->chunk_sectors << 9;
 		blk_queue_io_min(mddev->queue, chunk_size);
@@ -5192,7 +5183,6 @@ static int stop(mddev_t *mddev)
 	mddev->thread = NULL;
 	if (mddev->queue)
 		mddev->queue->backing_dev_info.congested_fn = NULL;
-	plugger_flush(&conf->plug); /* the unplug fn references 'conf'*/
 	free_conf(conf);
 	mddev->private = NULL;
 	mddev->to_remove = &raid5_attrs_group;
@@ -5688,6 +5678,7 @@ static void raid5_quiesce(mddev_t *mddev, int state)
 static void *raid45_takeover_raid0(mddev_t *mddev, int level)
 {
 	struct raid0_private_data *raid0_priv = mddev->private;
+	sector_t sectors;
 
 	/* for raid0 takeover only one zone is supported */
 	if (raid0_priv->nr_strip_zones > 1) {
@@ -5696,6 +5687,9 @@ static void *raid45_takeover_raid0(mddev_t *mddev, int level)
 		return ERR_PTR(-EINVAL);
 	}
 
+	sectors = raid0_priv->strip_zone[0].zone_end;
+	sector_div(sectors, raid0_priv->strip_zone[0].nb_dev);
+	mddev->dev_sectors = sectors;
 	mddev->new_level = level;
 	mddev->new_layout = ALGORITHM_PARITY_N;
 	mddev->new_chunk_sectors = mddev->chunk_sectors;
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 8d563a4f022..3ca77a2613b 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -400,8 +400,6 @@ struct raid5_private_data {
 					    * Cleared when a sync completes.
 					    */
 
-	struct plug_handle	plug;
-
 	/* per cpu variables */
 	struct raid5_percpu {
 		struct page	*spare_page; /* Used when checking P/Q in raid6 */
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 74ee172b5bc..b2ba9dc0dd6 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -161,7 +161,7 @@ static int saa7146_i2c_reset(struct saa7146_dev *dev)
 		msleep(SAA7146_I2C_DELAY);
 	}
 
-	/* if any error is still present, a fatal error has occured ... */
+	/* if any error is still present, a fatal error has occurred ... */
 	status = saa7146_i2c_status(dev);
 	if ( dev->i2c_bitrate != status ) {
 		DEB_I2C(("fatal error. status:0x%08x\n",status));
@@ -326,9 +326,9 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m
 			if ( 0 != err) {
 				/* this one is unsatisfying: some i2c slaves on some
 				   dvb cards don't acknowledge correctly, so the saa7146
-				   thinks that an address error occured. in that case, the
+				   thinks that an address error occurred. in that case, the
 				   transaction should be retrying, even if an address error
-				   occured. analog saa7146 based cards extensively rely on
+				   occurred. analog saa7146 based cards extensively rely on
 				   i2c address probing, however, and address errors indicate that a
 				   device is really *not* there. retrying in that case
 				   increases the time the device needs to probe greatly, so
@@ -365,7 +365,7 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m
 	DEB_I2C(("transmission successful. (msg:%d).\n",err));
 out:
 	/* another bug in revision 0: the i2c-registers get uploaded randomly by other
-	   uploads, so we better clear them out before continueing */
+	   uploads, so we better clear them out before continuing */
 	if( 0 == dev->revision ) {
 		__le32 zero = 0;
 		saa7146_i2c_reset(dev);
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 605e28b7326..0d6e0941904 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -106,7 +106,7 @@ enum {
 /* MXL5005 Tuner Register Struct */
 struct TunerReg {
 	u16 Reg_Num;	/* Tuner Register Address */
-	u16 Reg_Val;	/* Current sw programmed value waiting to be writen */
+	u16 Reg_Val;	/* Current sw programmed value waiting to be written */
 };
 
 enum {
diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index 5466d47db89..aae40e52af5 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -533,16 +533,7 @@ int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq)
 	if (tda_fail(ret))
 		goto fail;
 
-	regs[R_MPD]   = (0x77 & pd);
-
-	switch (priv->mode) {
-	case TDA18271_ANALOG:
-		regs[R_MPD]  &= ~0x08;
-		break;
-	case TDA18271_DIGITAL:
-		regs[R_MPD]  |=  0x08;
-		break;
-	}
+	regs[R_MPD]   = (0x7f & pd);
 
 	div =  ((d * (freq / 1000)) << 7) / 125;
 
diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 9ad4454a148..d884f5eee73 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -579,8 +579,8 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq)
 #define RF3 2
 	u32 rf_default[3];
 	u32 rf_freq[3];
-	u8 prog_cal[3];
-	u8 prog_tab[3];
+	s32 prog_cal[3];
+	s32 prog_tab[3];
 
 	i = tda18271_lookup_rf_band(fe, &freq, NULL);
 
@@ -602,32 +602,33 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq)
 			return bcal;
 
 		tda18271_calc_rf_cal(fe, &rf_freq[rf]);
-		prog_tab[rf] = regs[R_EB14];
+		prog_tab[rf] = (s32)regs[R_EB14];
 
 		if (1 == bcal)
-			prog_cal[rf] = tda18271_calibrate_rf(fe, rf_freq[rf]);
+			prog_cal[rf] =
+				(s32)tda18271_calibrate_rf(fe, rf_freq[rf]);
 		else
 			prog_cal[rf] = prog_tab[rf];
 
 		switch (rf) {
 		case RF1:
 			map[i].rf_a1 = 0;
-			map[i].rf_b1 = (s32)(prog_cal[RF1] - prog_tab[RF1]);
+			map[i].rf_b1 = (prog_cal[RF1] - prog_tab[RF1]);
 			map[i].rf1   = rf_freq[RF1] / 1000;
 			break;
 		case RF2:
-			dividend = (s32)(prog_cal[RF2] - prog_tab[RF2]) -
-				   (s32)(prog_cal[RF1] + prog_tab[RF1]);
+			dividend = (prog_cal[RF2] - prog_tab[RF2] -
+				    prog_cal[RF1] + prog_tab[RF1]);
 			divisor = (s32)(rf_freq[RF2] - rf_freq[RF1]) / 1000;
 			map[i].rf_a1 = (dividend / divisor);
 			map[i].rf2   = rf_freq[RF2] / 1000;
 			break;
 		case RF3:
-			dividend = (s32)(prog_cal[RF3] - prog_tab[RF3]) -
-				   (s32)(prog_cal[RF2] + prog_tab[RF2]);
+			dividend = (prog_cal[RF3] - prog_tab[RF3] -
+				    prog_cal[RF2] + prog_tab[RF2]);
 			divisor = (s32)(rf_freq[RF3] - rf_freq[RF2]) / 1000;
 			map[i].rf_a2 = (dividend / divisor);
-			map[i].rf_b2 = (s32)(prog_cal[RF2] - prog_tab[RF2]);
+			map[i].rf_b2 = (prog_cal[RF2] - prog_tab[RF2]);
 			map[i].rf3   = rf_freq[RF3] / 1000;
 			break;
 		default:
diff --git a/drivers/media/common/tuners/tda18271-maps.c b/drivers/media/common/tuners/tda18271-maps.c
index e7f84c705da..3d5b6ab7e33 100644
--- a/drivers/media/common/tuners/tda18271-maps.c
+++ b/drivers/media/common/tuners/tda18271-maps.c
@@ -229,8 +229,7 @@ static struct tda18271_map tda18271c2_km[] = {
 static struct tda18271_map tda18271_rf_band[] = {
 	{ .rfmax =  47900, .val = 0x00 },
 	{ .rfmax =  61100, .val = 0x01 },
-/*	{ .rfmax = 152600, .val = 0x02 }, */
-	{ .rfmax = 121200, .val = 0x02 },
+	{ .rfmax = 152600, .val = 0x02 },
 	{ .rfmax = 164700, .val = 0x03 },
 	{ .rfmax = 203500, .val = 0x04 },
 	{ .rfmax = 457800, .val = 0x05 },
@@ -448,7 +447,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = {
 	{ .rfmax = 150000, .val = 0xb0 },
 	{ .rfmax = 151000, .val = 0xb1 },
 	{ .rfmax = 152000, .val = 0xb7 },
-	{ .rfmax = 153000, .val = 0xbd },
+	{ .rfmax = 152600, .val = 0xbd },
 	{ .rfmax = 154000, .val = 0x20 },
 	{ .rfmax = 155000, .val = 0x22 },
 	{ .rfmax = 156000, .val = 0x24 },
@@ -459,7 +458,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = {
 	{ .rfmax = 161000, .val = 0x2d },
 	{ .rfmax = 163000, .val = 0x2e },
 	{ .rfmax = 164000, .val = 0x2f },
-	{ .rfmax = 165000, .val = 0x30 },
+	{ .rfmax = 164700, .val = 0x30 },
 	{ .rfmax = 166000, .val = 0x11 },
 	{ .rfmax = 167000, .val = 0x12 },
 	{ .rfmax = 168000, .val = 0x13 },
@@ -510,7 +509,8 @@ static struct tda18271_map tda18271c2_rf_cal[] = {
 	{ .rfmax = 236000, .val = 0x1b },
 	{ .rfmax = 237000, .val = 0x1c },
 	{ .rfmax = 240000, .val = 0x1d },
-	{ .rfmax = 242000, .val = 0x1f },
+	{ .rfmax = 242000, .val = 0x1e },
+	{ .rfmax = 244000, .val = 0x1f },
 	{ .rfmax = 247000, .val = 0x20 },
 	{ .rfmax = 249000, .val = 0x21 },
 	{ .rfmax = 252000, .val = 0x22 },
@@ -624,7 +624,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = {
 	{ .rfmax = 453000, .val = 0x93 },
 	{ .rfmax = 454000, .val = 0x94 },
 	{ .rfmax = 456000, .val = 0x96 },
-	{ .rfmax = 457000, .val = 0x98 },
+	{ .rfmax = 457800, .val = 0x98 },
 	{ .rfmax = 461000, .val = 0x11 },
 	{ .rfmax = 468000, .val = 0x12 },
 	{ .rfmax = 472000, .val = 0x13 },
diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/common/tuners/tda18271.h
index 3abb221f3d0..50cfa8cebb9 100644
--- a/drivers/media/common/tuners/tda18271.h
+++ b/drivers/media/common/tuners/tda18271.h
@@ -98,7 +98,7 @@ struct tda18271_config {
 	/* output options that can be disabled */
 	enum tda18271_output_options output_opt;
 
-	/* some i2c providers cant write all 39 registers at once */
+	/* some i2c providers can't write all 39 registers at once */
 	enum tda18271_small_i2c small_i2c;
 
 	/* force rf tracking filter calibration on startup */
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 227c0200b70..03f96d6ca89 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -38,7 +38,7 @@ MODULE_PARM_DESC(debug,
 	DEBSTATUS);
 
 #define DRIVER_VERSION "0.1"
-#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
+#define DRIVER_NAME "flexcop-pci"
 #define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
 
 struct flexcop_pci {
@@ -58,7 +58,7 @@ struct flexcop_pci {
 
 	int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
 	u32 last_dma1_cur_pos;
-	/* position of the pointer last time the timer/packet irq occured */
+	/* position of the pointer last time the timer/packet irq occurred */
 	int count;
 	int count_prev;
 	int stream_problem;
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 78fc469f0f6..1e1106dcd06 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -427,10 +427,10 @@ static void or51211_reset(struct dvb_frontend * fe)
 	struct dvb_bt8xx_card *bt = fe->dvb->priv;
 
 	/* RESET DEVICE
-	 * reset is controled by GPIO-0
+	 * reset is controlled by GPIO-0
 	 * when set to 0 causes reset and when to 1 for normal op
 	 * must remain reset for 128 clock cycles on a 50Mhz clock
-	 * also PRM1 PRM2 & PRM4 are controled by GPIO-1,GPIO-2 & GPIO-4
+	 * also PRM1 PRM2 & PRM4 are controlled by GPIO-1,GPIO-2 & GPIO-4
 	 * We assume that the reset has be held low long enough or we
 	 * have been reset by a power on.  When the driver is unloaded
 	 * reset set to 0 so if reloaded we have been reset.
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index cad6634610e..31e2c0d45db 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1638,7 +1638,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
 	case FE_READ_STATUS: {
 		fe_status_t* status = parg;
 
-		/* if retune was requested but hasn't occured yet, prevent
+		/* if retune was requested but hasn't occurred yet, prevent
 		 * that user get signal state from previous tuning */
 		if (fepriv->state == FESTATE_RETUNE ||
 		    fepriv->state == FESTATE_ERROR) {
@@ -1729,7 +1729,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
 			 * Dish network legacy switches (as used by Dish500)
 			 * are controlled by sending 9-bit command words
 			 * spaced 8msec apart.
-			 * the actual command word is switch/port dependant
+			 * the actual command word is switch/port dependent
 			 * so it is up to the userspace application to send
 			 * the right command.
 			 * The command must always start with a '0' after
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index fe4f894183f..c545039287a 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -356,13 +356,15 @@ config DVB_USB_LME2510
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
 	select DVB_STV0288 if !DVB_FE_CUSTOMISE
 	select DVB_IX2505V if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 .
 
 config DVB_USB_TECHNISAT_USB2
 	tristate "Technisat DVB-S/S2 USB2.0 support"
 	depends on DVB_USB
-	select DVB_STB0899 if !DVB_FE_CUSTOMISE
-	select DVB_STB6100 if !DVB_FE_CUSTOMISE
+	select DVB_STV090x if !DVB_FE_CUSTOMISE
+	select DVB_STV6110x if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the Technisat USB2 DVB-S/S2 device
diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c
index 199ece0d488..6ad94745bbd 100644
--- a/drivers/media/dvb/dvb-usb/af9005-fe.c
+++ b/drivers/media/dvb/dvb-usb/af9005-fe.c
@@ -580,7 +580,7 @@ static int af9005_fe_program_cfoe(struct dvb_usb_device *d, fe_bandwidth_t bw)
 		NS_coeff2_8k = 0x724925;
 		break;
 	default:
-		err("Invalid bandwith %d.", bw);
+		err("Invalid bandwidth %d.", bw);
 		return -EINVAL;
 	}
 
@@ -789,7 +789,7 @@ static int af9005_fe_select_bw(struct dvb_usb_device *d, fe_bandwidth_t bw)
 		temp = 2;
 		break;
 	default:
-		err("Invalid bandwith %d.", bw);
+		err("Invalid bandwidth %d.", bw);
 		return -EINVAL;
 	}
 	return af9005_write_register_bits(d, xd_g_reg_bw, reg_bw_pos,
@@ -930,7 +930,7 @@ static int af9005_fe_init(struct dvb_frontend *fe)
 	if (ret)
 		return ret;
 
-	/* init other parameters: program cfoe and select bandwith */
+	/* init other parameters: program cfoe and select bandwidth */
 	deb_info("program cfoe\n");
 	if ((ret = af9005_fe_program_cfoe(state->d, BANDWIDTH_6_MHZ)))
 		return ret;
@@ -1167,7 +1167,7 @@ static int af9005_fe_set_frontend(struct dvb_frontend *fe,
 	if (ret)
 		return ret;
 
-	/* select bandwith */
+	/* select bandwidth */
 	deb_info("select bandwidth");
 	ret = af9005_fe_select_bw(state->d, fep->u.ofdm.bandwidth);
 	if (ret)
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 97af266d7f1..65214af5cd7 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -2162,7 +2162,7 @@ struct dibx000_agc_config dib7090_agc_config[2] = {
 		.agc1_pt3       = 98,
 		.agc1_slope1    = 0,
 		.agc1_slope2    = 167,
-		.agc1_pt1       = 98,
+		.agc2_pt1       = 98,
 		.agc2_pt2       = 255,
 		.agc2_slope1    = 104,
 		.agc2_slope2    = 0,
@@ -2440,11 +2440,11 @@ static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
 	dib0700_set_i2c_speed(adap->dev, 340);
 	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
 
-	dib7090_slave_reset(adap->fe);
-
 	if (adap->fe == NULL)
 		return -ENODEV;
 
+	dib7090_slave_reset(adap->fe);
+
 	return 0;
 }
 
diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h
index af8d55e390f..0f461ca10cb 100644
--- a/drivers/media/dvb/dvb-usb/friio.h
+++ b/drivers/media/dvb/dvb-usb/friio.h
@@ -20,7 +20,7 @@
  *         Frontend:                             comtech JDVBT-90502
  *             (tuner PLL:                       tua6034, I2C addr:(0xC0 >> 1))
  *             (OFDM demodulator:                TC90502, I2C addr:(0x30 >> 1))
- *         LED x3 (+LNB) controll:               PIC 16F676
+ *         LED x3 (+LNB) control:                PIC 16F676
  *         EEPROM:                               24C08
  *
  *        (USB smart card reader:                AU9522)
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index cd26e7c1536..f2db01212ca 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -321,7 +321,7 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap)
 	lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
 	usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
-	info("INT Interupt Service Started");
+	info("INT Interrupt Service Started");
 
 	return 0;
 }
@@ -482,7 +482,7 @@ static int lme2510_msg(struct dvb_usb_device *d,
 			break;
 		}
 
-		deb_info(4, "I2C From Interupt Message out(%02x) in(%02x)",
+		deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)",
 				wbuf[3], rbuf[1]);
 
 	}
@@ -632,11 +632,11 @@ static int lme2510_int_service(struct dvb_usb_adapter *adap)
 	}
 	d->rc_dev = rc;
 
-	/* Start the Interupt */
+	/* Start the Interrupt */
 	ret = lme2510_int_read(adap);
 	if (ret < 0) {
 		rc_unregister_device(rc);
-		info("INT Unable to start Interupt Service");
+		info("INT Unable to start Interrupt Service");
 		return -ENODEV;
 	}
 
@@ -1003,7 +1003,7 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
 		return -ENODEV;
 	}
 
-	/* Start the Interupt & Remote*/
+	/* Start the Interrupt & Remote*/
 	ret = lme2510_int_service(adap);
 
 	return ret;
@@ -1171,7 +1171,7 @@ void *lme2510_exit_int(struct dvb_usb_device *d)
 		usb_kill_urb(st->lme_urb);
 		usb_free_coherent(d->udev, 5000, st->buffer,
 				  st->lme_urb->transfer_dma);
-		info("Interupt Service Stopped");
+		info("Interrupt Service Stopped");
 		rc_unregister_device(d->rc_dev);
 		info("Remote Stopped");
 	}
diff --git a/drivers/media/dvb/frontends/atbm8830.h b/drivers/media/dvb/frontends/atbm8830.h
index e8149f39330..024273374bd 100644
--- a/drivers/media/dvb/frontends/atbm8830.h
+++ b/drivers/media/dvb/frontends/atbm8830.h
@@ -39,7 +39,7 @@ struct atbm8830_config {
 	/* parallel or serial transport stream */
 	u8 serial_ts;
 
-	/* transport stream clock output only when receving valid stream */
+	/* transport stream clock output only when receiving valid stream */
 	u8 ts_clk_gated;
 
 	/* Decoder sample TS data at rising edge of clock */
diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c
index 65f6a36dfb2..1d572940e24 100644
--- a/drivers/media/dvb/frontends/au8522_dig.c
+++ b/drivers/media/dvb/frontends/au8522_dig.c
@@ -635,7 +635,7 @@ static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)
 	struct au8522_led_config *led_config = state->config->led_cfg;
 	u8 val;
 
-	/* bail out if we cant control an LED */
+	/* bail out if we can't control an LED */
 	if (!led_config || !led_config->gpio_output ||
 	    !led_config->gpio_output_enable || !led_config->gpio_output_disable)
 		return 0;
@@ -665,7 +665,7 @@ static int au8522_led_ctrl(struct au8522_state *state, int led)
 	struct au8522_led_config *led_config = state->config->led_cfg;
 	int i, ret = 0;
 
-	/* bail out if we cant control an LED */
+	/* bail out if we can't control an LED */
 	if (!led_config || !led_config->gpio_leds ||
 	    !led_config->num_led_states || !led_config->led_states)
 		return 0;
@@ -803,7 +803,7 @@ static int au8522_led_status(struct au8522_state *state, const u16 *snr)
 	int led;
 	u16 strong;
 
-	/* bail out if we cant control an LED */
+	/* bail out if we can't control an LED */
 	if (!led_config)
 		return 0;
 
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index cf5e576dfdc..8aff5868a5e 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -155,7 +155,7 @@ static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len)
 	unsigned long t;
 
 /* Check if any previous HAB request still needs to be serviced by the
- * Aquisition Processor before sending new request */
+ * Acquisition Processor before sending new request */
 	if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
 		return ret;
 	if (v.HABSTAT_a8.HABR) {
@@ -361,7 +361,7 @@ static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
 /* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
 	c.TUNCTL_state = 0x40;
 
-/* PRESCALER DEVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
+/* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
 	c.ctl_dat[0].ctrl.size = BITS_8;
 	c.ctl_dat[0].data      = 0x80 | bc;
 
@@ -397,7 +397,7 @@ static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
 	c.ctl_dat[7].ctrl.cs0  = 1;
 	c.ctl_dat[7].data      = 0x40;
 
-/* PRESCALER DEVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
+/* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
 	c.ctl_dat[8].ctrl.size = BITS_8;
 	c.ctl_dat[8].data      = 0x80;
 
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index 5fbc0fc37ec..0142214b013 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -179,7 +179,7 @@ static int cx22700_set_tps (struct cx22700_state *state, struct dvb_ofdm_paramet
 	cx22700_writereg (state, 0x06, val);
 
 	cx22700_writereg (state, 0x08, 0x04 | 0x02);  /* use user tps parameters */
-	cx22700_writereg (state, 0x08, 0x04);         /* restart aquisition */
+	cx22700_writereg (state, 0x08, 0x04);         /* restart acquisition */
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index ff6c4983051..3139558148b 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -55,7 +55,7 @@ MODULE_PARM_DESC(debug, "Enable verbose debug messages");
 
 /* Register values to initialise the demod */
 static const u8 init_tab[] = {
-	0x00, 0x00, /* Stop aquisition */
+	0x00, 0x00, /* Stop acquisition */
 	0x0B, 0x06,
 	0x09, 0x01,
 	0x0D, 0x41,
@@ -310,7 +310,7 @@ static int cx22702_set_tps(struct dvb_frontend *fe,
 			& 0xfc);
 		cx22702_writereg(state, 0x0C,
 			(cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
-		cx22702_writereg(state, 0x00, 0x01); /* Begin aquisition */
+		cx22702_writereg(state, 0x00, 0x01); /* Begin acquisition */
 		dprintk("%s: Autodetecting\n", __func__);
 		return 0;
 	}
@@ -424,7 +424,7 @@ static int cx22702_set_tps(struct dvb_frontend *fe,
 	cx22702_writereg(state, 0x0C,
 		(cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
 
-	/* Begin channel aquisition */
+	/* Begin channel acquisition */
 	cx22702_writereg(state, 0x00, 0x01);
 
 	return 0;
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 7a1a5bc337d..bf9c999aa47 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -544,7 +544,7 @@ static int cx24110_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 	cx24110_set_inversion (state, p->inversion);
 	cx24110_set_fec (state, p->u.qpsk.fec_inner);
 	cx24110_set_symbolrate (state, p->u.qpsk.symbol_rate);
-	cx24110_writereg(state,0x04,0x05); /* start aquisition */
+	cx24110_writereg(state,0x04,0x05); /* start acquisition */
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/cx24113.h b/drivers/media/dvb/frontends/cx24113.h
index 5de0f7ffd8d..01eb7b9c28f 100644
--- a/drivers/media/dvb/frontends/cx24113.h
+++ b/drivers/media/dvb/frontends/cx24113.h
@@ -1,5 +1,5 @@
 /*
- *  Driver for Conexant CX24113/CX24128 Tuner (Satelite)
+ *  Driver for Conexant CX24113/CX24128 Tuner (Satellite)
  *
  *  Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org>
  *
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index fad6a990a39..b1dd8acc607 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -949,7 +949,7 @@ static int cx24123_set_frontend(struct dvb_frontend *fe,
 	else
 		err("it seems I don't have a tuner...");
 
-	/* Enable automatic aquisition and reset cycle */
+	/* Enable automatic acquisition and reset cycle */
 	cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07));
 	cx24123_writereg(state, 0x00, 0x10);
 	cx24123_writereg(state, 0x00, 0);
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index a05007c8098..536f02b1733 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -1097,7 +1097,7 @@ static int drx397x_init(struct dvb_frontend *fe)
 	s->config.ifagc.w0A = 0x3ff;
 	s->config.ifagc.w0C = 0x388;
 
-	/* for signal strenght calculations */
+	/* for signal strength calculations */
 	s->config.ss76 = 820;
 	s->config.ss78 = 2200;
 	s->config.ss7A = 150;
diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c
index 33b63235b86..c283112051b 100644
--- a/drivers/media/dvb/frontends/mb86a16.c
+++ b/drivers/media/dvb/frontends/mb86a16.c
@@ -1630,7 +1630,7 @@ static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe,
 	state->srate = p->u.qpsk.symbol_rate / 1000;
 
 	if (!mb86a16_set_fe(state)) {
-		dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK");
+		dprintk(verbose, MB86A16_ERROR, 1, "Successfully acquired LOCK");
 		return DVBFE_ALGO_SEARCH_SUCCESS;
 	}
 
diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c
index cc4acd2f920..0f867a5055f 100644
--- a/drivers/media/dvb/frontends/mb86a20s.c
+++ b/drivers/media/dvb/frontends/mb86a20s.c
@@ -406,7 +406,7 @@ err:
 		printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n");
 	} else {
 		state->need_init = false;
-		dprintk("Initialization succeded.\n");
+		dprintk("Initialization succeeded.\n");
 	}
 	return rc;
 }
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 472907d4346..83e6f1a1b70 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -670,7 +670,7 @@ static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
 		if (ret < 0)
 			goto error;
 
-		/* preserve this bit to not accidently shutdown ADC */
+		/* preserve this bit to not accidentally shutdown ADC */
 		val &= 0x80;
 		break;
 	}
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index e87b747ea99..17f8cdf8afe 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -225,7 +225,7 @@ static int s5h1420_recv_slave_reply (struct dvb_frontend* fe,
 	unsigned long timeout;
 	int result = 0;
 
-	/* setup for DISEQC recieve */
+	/* setup for DISEQC receive */
 	val = s5h1420_readreg(state, 0x3b);
 	s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */
 	msleep(15);
diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
index 64673b8b64a..bc1a8af4f6e 100644
--- a/drivers/media/dvb/frontends/stb6100.c
+++ b/drivers/media/dvb/frontends/stb6100.c
@@ -360,7 +360,7 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
 	else
 		odiv = 0;
 
-	/* VCO enabled, seach clock off as per LL3.7, 3.4.1 */
+	/* VCO enabled, search clock off as per LL3.7, 3.4.1 */
 	regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
 
 	/* OSM	*/
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 4fd7479bb62..84d88f33275 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -435,7 +435,7 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par
 		return -EINVAL;
 	}
 
-	// determine inversion dependant parameters
+	// determine inversion dependent parameters
 	inversion = p->inversion;
 	if (state->config->invert)
 		inversion = (inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON;
diff --git a/drivers/media/dvb/frontends/stv0367.c b/drivers/media/dvb/frontends/stv0367.c
index 4e0e6a873b8..e57ab53e2e2 100644
--- a/drivers/media/dvb/frontends/stv0367.c
+++ b/drivers/media/dvb/frontends/stv0367.c
@@ -1328,7 +1328,7 @@ stv0367_ter_signal_type stv0367ter_lock_algo(struct stv0367_state *state)
 
 	/*guard=stv0367_readbits(state,F367TER_SYR_GUARD); */
 
-	/*supress EPQ auto for SYR_GARD 1/16 or 1/32
+	/*suppress EPQ auto for SYR_GARD 1/16 or 1/32
 	and set channel predictor in automatic */
 #if 0
 	switch (guard) {
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index b62b0f0a4fe..e0ea74c8e09 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -238,7 +238,7 @@ enum fe_stv0900_demod_mode {
 };
 
 struct stv0900_init_params{
-	u32	dmd_ref_clk;/* Refrence,Input clock for the demod in Hz */
+	u32	dmd_ref_clk;/* Reference,Input clock for the demod in Hz */
 
 	/* Demodulator Type (single demod or dual demod) */
 	enum fe_stv0900_demod_mode	demod_mode;
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 41d0f0a6655..52d8712411e 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -1424,7 +1424,7 @@ static int stv090x_start_search(struct stv090x_state *state)
 			if (STV090x_WRITE_DEMOD(state, CFRLOW0, 0x00) < 0)
 				goto err;
 
-			/*enlarge the timing bandwith for Low SR*/
+			/*enlarge the timing bandwidth for Low SR*/
 			if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0)
 				goto err;
 		} else {
@@ -1432,17 +1432,17 @@ static int stv090x_start_search(struct stv090x_state *state)
 			Set The carrier search up and low to auto mode */
 			if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0)
 				goto err;
-			/*reduce the timing bandwith for high SR*/
+			/*reduce the timing bandwidth for high SR*/
 			if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0)
 				goto err;
 		}
 	} else {
 		/* >= Cut 3 */
 		if (state->srate <= 5000000) {
-			/* enlarge the timing bandwith for Low SR */
+			/* enlarge the timing bandwidth for Low SR */
 			STV090x_WRITE_DEMOD(state, RTCS2, 0x68);
 		} else {
-			/* reduce timing bandwith for high SR */
+			/* reduce timing bandwidth for high SR */
 			STV090x_WRITE_DEMOD(state, RTCS2, 0x44);
 		}
 
@@ -2482,7 +2482,7 @@ static int stv090x_sw_algo(struct stv090x_state *state)
 					dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD);
 				}
 				if (dvbs2_fly_wheel < 0xd) {
-					/*FALSE lock, The demod is loosing lock */
+					/*FALSE lock, The demod is losing lock */
 					lock = 0;
 					if (trials < 2) {
 						if (state->internal->dev_ver >= 0x20) {
@@ -3202,7 +3202,7 @@ static enum stv090x_signal_state stv090x_algo(struct stv090x_state *state)
 			goto err;
 		if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0)
 			goto err;
-		if (stv090x_set_srate(state, 1000000) < 0) /* inital srate = 1Msps */
+		if (stv090x_set_srate(state, 1000000) < 0) /* initial srate = 1Msps */
 			goto err;
 	} else {
 		/* known srate */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
index 97b889e8a34..f807c8ba26e 100644
--- a/drivers/media/dvb/mantis/mantis_uart.c
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -172,7 +172,7 @@ int mantis_uart_init(struct mantis_pci *mantis)
 	mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
 
 	schedule_work(&mantis->uart_work);
-	dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized");
+	dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
 
 	return 0;
 }
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index 175a0f6c2a4..6927c726ce3 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -122,7 +122,7 @@ static void demux_tasklet(unsigned long data)
 						Cur->ngeneBuffer.SR.Flags &=
 							~0x40;
 						break;
-						/* Stop proccessing stream */
+						/* Stop processing stream */
 					}
 				} else {
 					/* We got a valid buffer,
@@ -133,7 +133,7 @@ static void demux_tasklet(unsigned long data)
 				printk(KERN_ERR DEVICE_NAME ": OOPS\n");
 				if (chan->HWState == HWSTATE_RUN) {
 					Cur->ngeneBuffer.SR.Flags &= ~0x40;
-					break;	/* Stop proccessing stream */
+					break;	/* Stop processing stream */
 				}
 			}
 			if (chan->AudioDTOUpdated) {
@@ -1520,6 +1520,7 @@ static int init_channel(struct ngene_channel *chan)
 	if (dev->ci.en && (io & NGENE_IO_TSOUT)) {
 		dvb_ca_en50221_init(adapter, dev->ci.en, 0, 1);
 		set_transfer(chan, 1);
+		chan->dev->channel[2].DataFormatFlags = DF_SWAP32;
 		set_transfer(&chan->dev->channel[2], 1);
 		dvb_register_device(adapter, &chan->ci_dev,
 				    &ngene_dvbdev_ci, (void *) chan,
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 6ca6713d527..7cb79ec685f 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -294,13 +294,13 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
 
 	/* Workaround for broken hardware:
 	 * [1] On startup NBPACKETS seems to contain an uninitialized value,
-	 *     but no packets have been transfered.
+	 *     but no packets have been transferred.
 	 * [2] Sometimes (actually very often) NBPACKETS stays at zero
-	 *     although one packet has been transfered.
+	 *     although one packet has been transferred.
 	 * [3] Sometimes (actually rarely), the card gets into an erroneous
 	 *     mode where it continuously generates interrupts, claiming it
-	 *     has recieved nbpackets>TS_DMA_PACKETS packets, but no packet
-	 *     has been transfered. Only a reset seems to solve this
+	 *     has received nbpackets>TS_DMA_PACKETS packets, but no packet
+	 *     has been transferred. Only a reset seems to solve this
 	 */
 	if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
 		unsigned int i = 0;
@@ -332,7 +332,7 @@ static irqreturn_t pluto_irq(int irq, void *dev_id)
 	struct pluto *pluto = dev_id;
 	u32 tscr;
 
-	/* check whether an interrupt occured on this device */
+	/* check whether an interrupt occurred on this device */
 	tscr = pluto_readreg(pluto, REG_TSCR);
 	if (!(tscr & (TSCR_DE | TSCR_OVR)))
 		return IRQ_NONE;
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index b80d09b035a..37c594f8278 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -650,7 +650,7 @@ static int smsdvb_dvbt_set_frontend(struct dvb_frontend *fe,
 		if (status & FE_HAS_LOCK)
 			return ret;
 
-		/* previous tune didnt lock - enable LNA and tune again */
+		/* previous tune didn't lock - enable LNA and tune again */
 		sms_board_lna_control(client->coredev, 1);
 	}
 
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index fc0a60f8a1e..3d20719fce1 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2332,7 +2332,7 @@ static int frontend_init(struct av7110 *av7110)
  * increment. That's how the 7146 is programmed to do event
  * counting in this budget-patch.c
  * I *think* HPS setting has something to do with the phase
- * of HS but I cant be 100% sure in that.
+ * of HS but I can't be 100% sure in that.
  *
  * hardware debug note: a working budget card (including budget patch)
  * with vpeirq() interrupt setup in mode "0x90" (every 64K) will
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 57983559069..3395d1a9051 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -539,7 +539,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 **      increment. That's how the 7146 is programmed to do event
 **      counting in this budget-patch.c
 **      I *think* HPS setting has something to do with the phase
-**      of HS but I cant be 100% sure in that.
+**      of HS but I can't be 100% sure in that.
 
 **      hardware debug note: a working budget card (including budget patch)
 **      with vpeirq() interrupt setup in mode "0x90" (every 64K) will
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index fe1b8037b24..f893bffa08a 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -234,7 +234,7 @@ static void ttusb_dec_handle_irq( struct urb *urb)
 		 * (with buffer[3] == 0x40) in an intervall of ~100ms.
 		 * But to handle this correctly we had to imlemenent some
 		 * kind of timer which signals a 'key up' event if no
-		 * keyrepeat signal is recieved for lets say 200ms.
+		 * keyrepeat signal is received for lets say 200ms.
 		 * this should/could be added later ...
 		 * for now lets report each signal as a key down and up*/
 		dprintk("%s:rc signal:%d\n", __func__, buffer[4]);
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 23640ed44d8..056138f63c7 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -378,7 +378,6 @@ EXPORT_SYMBOL_GPL(media_entity_create_link);
 
 static int __media_entity_setup_link_notify(struct media_link *link, u32 flags)
 {
-	const u32 mask = MEDIA_LNK_FL_ENABLED;
 	int ret;
 
 	/* Notify both entities. */
@@ -395,7 +394,7 @@ static int __media_entity_setup_link_notify(struct media_link *link, u32 flags)
 		return ret;
 	}
 
-	link->flags = (link->flags & ~mask) | (flags & mask);
+	link->flags = flags;
 	link->reverse->flags = link->flags;
 
 	return 0;
@@ -417,6 +416,7 @@ static int __media_entity_setup_link_notify(struct media_link *link, u32 flags)
  */
 int __media_entity_setup_link(struct media_link *link, u32 flags)
 {
+	const u32 mask = MEDIA_LNK_FL_ENABLED;
 	struct media_device *mdev;
 	struct media_entity *source, *sink;
 	int ret = -EBUSY;
@@ -424,6 +424,10 @@ int __media_entity_setup_link(struct media_link *link, u32 flags)
 	if (link == NULL)
 		return -EINVAL;
 
+	/* The non-modifiable link flags must not be modified. */
+	if ((link->flags & ~mask) != (flags & ~mask))
+		return -EINVAL;
+
 	if (link->flags & MEDIA_LNK_FL_IMMUTABLE)
 		return link->flags == flags ? 0 : -EINVAL;
 
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index e6b2d085a44..b3a635b9582 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -99,7 +99,7 @@ devices, that would be 76 and 91.  */
 
 /*
  * Commands that device should understand
- * List isnt full and will be updated with implementation of new functions
+ * List isn't full and will be updated with implementation of new functions
  */
 #define AMRADIO_SET_FREQ	0xa4
 #define AMRADIO_SET_MUTE	0xab
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index dc3f04c52d5..87bad7678d9 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -170,7 +170,7 @@ static int fmr2_setfreq(struct fmr2 *dev)
 	return 0;
 }
 
-/* !!! not tested, in my card this does't work !!! */
+/* !!! not tested, in my card this doesn't work !!! */
 static int fmr2_setvolume(struct fmr2 *dev)
 {
 	int vol[16] = { 0x021, 0x084, 0x090, 0x104,
diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c
index 585680ffbfb..b1193dfc508 100644
--- a/drivers/media/radio/saa7706h.c
+++ b/drivers/media/radio/saa7706h.c
@@ -376,7 +376,7 @@ static int __devinit saa7706h_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;
diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index 0fab6f8f7e2..deca2e06ff2 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -481,7 +481,7 @@ unlock:
 }
 
 /*
- * si4713_wait_stc - Waits STC interrupt and clears status bits. Usefull
+ * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful
  *		     for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
  * @sdev: si4713_device structure for the device we are communicating
  * @usecs: timeout to wait for STC interrupt signal
diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c
index 7c0d77751f6..0991e197367 100644
--- a/drivers/media/radio/tef6862.c
+++ b/drivers/media/radio/tef6862.c
@@ -176,7 +176,7 @@ static int __devinit tef6862_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct tef6862_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tef6862_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	state->freq = TEF6862_LO_FREQ;
diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 64454d39c0c..5991ab60303 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -352,7 +352,7 @@ static void send_tasklet(unsigned long arg)
 	if (!atomic_read(&fmdev->tx_cnt))
 		return;
 
-	/* Check, is there any timeout happenned to last transmitted packet */
+	/* Check, is there any timeout happened to last transmitted packet */
 	if ((jiffies - fmdev->last_tx_jiffies) > FM_DRV_TX_TIMEOUT) {
 		fmerr("TX timeout occurred\n");
 		atomic_set(&fmdev->tx_cnt, 1);
@@ -478,7 +478,7 @@ u32 fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
 		return -ETIMEDOUT;
 	}
 	if (!fmdev->resp_skb) {
-		fmerr("Reponse SKB is missing\n");
+		fmerr("Response SKB is missing\n");
 		return -EFAULT;
 	}
 	spin_lock_irqsave(&fmdev->resp_skb_lock, flags);
@@ -1494,12 +1494,17 @@ u32 fmc_prepare(struct fmdev *fmdev)
 	}
 
 	memset(&fm_st_proto, 0, sizeof(fm_st_proto));
-	fm_st_proto.type = ST_FM;
 	fm_st_proto.recv = fm_st_receive;
 	fm_st_proto.match_packet = NULL;
 	fm_st_proto.reg_complete_cb = fm_st_reg_comp_cb;
 	fm_st_proto.write = NULL; /* TI ST driver will fill write pointer */
 	fm_st_proto.priv_data = fmdev;
+	fm_st_proto.chnl_id = 0x08;
+	fm_st_proto.max_frame_size = 0xff;
+	fm_st_proto.hdr_len = 1;
+	fm_st_proto.offset_len_in_hdr = 0;
+	fm_st_proto.len_size = 1;
+	fm_st_proto.reserve = 1;
 
 	ret = st_register(&fm_st_proto);
 	if (ret == -EINPROGRESS) {
@@ -1532,7 +1537,7 @@ u32 fmc_prepare(struct fmdev *fmdev)
 		g_st_write = fm_st_proto.write;
 	} else {
 		fmerr("Failed to get ST write func pointer\n");
-		ret = st_unregister(ST_FM);
+		ret = st_unregister(&fm_st_proto);
 		if (ret < 0)
 			fmerr("st_unregister failed %d\n", ret);
 		return -EAGAIN;
@@ -1586,13 +1591,14 @@ u32 fmc_prepare(struct fmdev *fmdev)
  */
 u32 fmc_release(struct fmdev *fmdev)
 {
+	static struct st_proto_s fm_st_proto;
 	u32 ret;
 
 	if (!test_bit(FM_CORE_READY, &fmdev->flag)) {
 		fmdbg("FM Core is already down\n");
 		return 0;
 	}
-	/* Sevice pending read */
+	/* Service pending read */
 	wake_up_interruptible(&fmdev->rx.rds.read_queue);
 
 	tasklet_kill(&fmdev->tx_task);
@@ -1604,7 +1610,11 @@ u32 fmc_release(struct fmdev *fmdev)
 	fmdev->resp_comp = NULL;
 	fmdev->rx.freq = 0;
 
-	ret = st_unregister(ST_FM);
+	memset(&fm_st_proto, 0, sizeof(fm_st_proto));
+	fm_st_proto.chnl_id = 0x08;
+
+	ret = st_unregister(&fm_st_proto);
+
 	if (ret < 0)
 		fmerr("Failed to de-register FM from ST %d\n", ret);
 	else
diff --git a/drivers/media/radio/wl128x/fmdrv_common.h b/drivers/media/radio/wl128x/fmdrv_common.h
index 427c4164cec..aee243bb663 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.h
+++ b/drivers/media/radio/wl128x/fmdrv_common.h
@@ -362,7 +362,7 @@ struct fm_event_msg_hdr {
 #define FM_TX_PREEMPH_50US		0
 #define FM_TX_PREEMPH_75US		2
 
-/* FM TX antenna impedence values */
+/* FM TX antenna impedance values */
 #define FM_TX_ANT_IMP_50		0
 #define FM_TX_ANT_IMP_200		1
 #define FM_TX_ANT_IMP_500		2
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 1ac49139158..a43ed6c41bf 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -520,7 +520,7 @@ static void ene_rx_disable(struct ene_device *dev)
 	dev->rx_enabled = false;
 }
 
-/* This resets the receiver. Usefull to stop stream of spaces at end of
+/* This resets the receiver. Useful to stop stream of spaces at end of
  * transmission
  */
 static void ene_rx_reset(struct ene_device *dev)
@@ -1089,7 +1089,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	if (error < 0)
 		goto error;
 
-	ene_notice("driver has been succesfully loaded");
+	ene_notice("driver has been successfully loaded");
 	return 0;
 error:
 	if (dev && dev->irq >= 0)
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index f714e1a22c9..8fc0f081b47 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -46,7 +46,7 @@
 #define MOD_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
 #define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
 #define MOD_NAME	"imon"
-#define MOD_VERSION	"0.9.2"
+#define MOD_VERSION	"0.9.3"
 
 #define DISPLAY_MINOR_BASE	144
 #define DEVICE_NAME	"lcd%d"
@@ -460,8 +460,9 @@ static int display_close(struct inode *inode, struct file *file)
 }
 
 /**
- * Sends a packet to the device -- this function must be called
- * with ictx->lock held.
+ * Sends a packet to the device -- this function must be called with
+ * ictx->lock held, or its unlock/lock sequence while waiting for tx
+ * to complete can/will lead to a deadlock.
  */
 static int send_packet(struct imon_context *ictx)
 {
@@ -991,12 +992,21 @@ static void imon_touch_display_timeout(unsigned long data)
  * the iMON remotes, and those used by the Windows MCE remotes (which is
  * really just RC-6), but only one or the other at a time, as the signals
  * are decoded onboard the receiver.
+ *
+ * This function gets called two different ways, one way is from
+ * rc_register_device, for initial protocol selection/setup, and the other is
+ * via a userspace-initiated protocol change request, either by direct sysfs
+ * prodding or by something like ir-keytable. In the rc_register_device case,
+ * the imon context lock is already held, but when initiated from userspace,
+ * it is not, so we must acquire it prior to calling send_packet, which
+ * requires that the lock is held.
  */
 static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 {
 	int retval;
 	struct imon_context *ictx = rc->priv;
 	struct device *dev = ictx->dev;
+	bool unlock = false;
 	unsigned char ir_proto_packet[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
 
@@ -1029,6 +1039,11 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 
 	memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
 
+	if (!mutex_is_locked(&ictx->lock)) {
+		unlock = true;
+		mutex_lock(&ictx->lock);
+	}
+
 	retval = send_packet(ictx);
 	if (retval)
 		goto out;
@@ -1037,6 +1052,9 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 	ictx->pad_mouse = false;
 
 out:
+	if (unlock)
+		mutex_unlock(&ictx->lock);
+
 	return retval;
 }
 
@@ -1293,7 +1311,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
 	 * contain a position coordinate (x,y), with each component ranging
 	 * from -14 to 14. We want to down-sample this to only 4 discrete values
 	 * for up/down/left/right arrow keys. Also, when you get too close to
-	 * diagonals, it has a tendancy to jump back and forth, so lets try to
+	 * diagonals, it has a tendency to jump back and forth, so lets try to
 	 * ignore when they get too close.
 	 */
 	if (ictx->product != 0xffdc) {
@@ -2134,6 +2152,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
 		goto rdev_setup_failed;
 	}
 
+	mutex_unlock(&ictx->lock);
 	return ictx;
 
 rdev_setup_failed:
@@ -2205,6 +2224,7 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
 		goto urb_submit_failed;
 	}
 
+	mutex_unlock(&ictx->lock);
 	return ictx;
 
 urb_submit_failed:
@@ -2299,6 +2319,8 @@ static int __devinit imon_probe(struct usb_interface *interface,
 	usb_set_intfdata(interface, ictx);
 
 	if (ifnum == 0) {
+		mutex_lock(&ictx->lock);
+
 		if (product == 0xffdc && ictx->rf_device) {
 			sysfs_err = sysfs_create_group(&interface->dev.kobj,
 						       &imon_rf_attr_group);
@@ -2309,13 +2331,14 @@ static int __devinit imon_probe(struct usb_interface *interface,
 
 		if (ictx->display_supported)
 			imon_init_display(ictx, interface);
+
+		mutex_unlock(&ictx->lock);
 	}
 
 	dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
 		 "usb<%d:%d> initialized\n", vendor, product, ifnum,
 		 usbdev->bus->busnum, usbdev->devnum);
 
-	mutex_unlock(&ictx->lock);
 	mutex_unlock(&driver_lock);
 
 	return 0;
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 01f258a2a57..11c19d8d0ee 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -153,7 +153,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
  * @type:	the type of the event that has occurred
  *
  * This routine (which may be called from an interrupt context) works
- * in similiar manner to ir_raw_event_store_edge.
+ * in similar manner to ir_raw_event_store_edge.
  * This routine is intended for devices with limited internal buffer
  * It automerges samples of same type, and handles timeouts
  */
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index ac0e42b47b2..43908a70bd8 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -36,11 +36,13 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/bitops.h>
 #include <media/rc-core.h>
 #include <linux/pci_ids.h>
+#include <linux/delay.h>
 
 #include "ite-cir.h"
 
diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
index 3c1913926c1..afae14fd152 100644
--- a/drivers/media/rc/keymaps/rc-lme2510.c
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -55,7 +55,7 @@ static struct rc_map_table lme2510_rc[] = {
 	{ 0xff40fb04, KEY_MEDIA_REPEAT}, /* Recall */
 	{ 0xff40e51a, KEY_PAUSE }, /* Timeshift */
 	{ 0xff40fd02, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
-	{ 0xff40f906, KEY_VOLUMEDOWN }, /* Volumne defined as right hand*/
+	{ 0xff40f906, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/
 	{ 0xff40fe01, KEY_CHANNELUP },
 	{ 0xff40fa05, KEY_CHANNELDOWN },
 	{ 0xff40eb14, KEY_ZOOM },
@@ -76,7 +76,7 @@ static struct rc_map_table lme2510_rc[] = {
 	{ 0xff00bb44, KEY_MEDIA_REPEAT}, /* Recall */
 	{ 0xff00b54a, KEY_PAUSE }, /* Timeshift */
 	{ 0xff00b847, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
-	{ 0xff00bc43, KEY_VOLUMEDOWN }, /* Volumne defined as right hand*/
+	{ 0xff00bc43, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/
 	{ 0xff00b946, KEY_CHANNELUP },
 	{ 0xff00bf40, KEY_CHANNELDOWN },
 	{ 0xff00f708, KEY_ZOOM },
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
index 18b37facb0d..fdd213ff1ad 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
@@ -29,7 +29,7 @@ static struct rc_map_table msi_tvanywhere[] = {
 
 	{ 0x0c, KEY_MUTE },
 	{ 0x0f, KEY_SCREEN },		/* Full Screen */
-	{ 0x10, KEY_FN },		/* Funtion */
+	{ 0x10, KEY_FN },		/* Function */
 	{ 0x11, KEY_TIME },		/* Time shift */
 	{ 0x12, KEY_POWER },
 	{ 0x13, KEY_MEDIA },		/* MTS */
diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
index f1c1281fbc1..f9f2fa2819b 100644
--- a/drivers/media/rc/keymaps/rc-norwood.c
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -49,7 +49,7 @@ static struct rc_map_table norwood[] = {
 	{ 0x37, KEY_PLAY },		/* Play                */
 	{ 0x36, KEY_PAUSE },		/* Pause               */
 	{ 0x2b, KEY_STOP },		/* Stop                */
-	{ 0x67, KEY_FASTFORWARD },	/* Foward              */
+	{ 0x67, KEY_FASTFORWARD },	/* Forward              */
 	{ 0x66, KEY_REWIND },		/* Rewind              */
 	{ 0x3e, KEY_SEARCH },		/* Auto Scan           */
 	{ 0x2e, KEY_CAMERA },		/* Capture Video       */
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 044fb7a382d..0c273ec465c 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -220,6 +220,8 @@ static struct usb_device_id mceusb_dev_table[] = {
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
 	/* Philips/Spinel plus IR transceiver for ASUS */
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
+	/* Philips IR transceiver (Dell branded) */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x2093) },
 	/* Realtek MCE IR Receiver and card reader */
 	{ USB_DEVICE(VENDOR_REALTEK, 0x0161),
 	  .driver_info = MULTIFUNCTION },
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 5ac1baf45c8..a2706648e36 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -255,7 +255,7 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,
  * @rc_map:	scancode table to be searched
  * @scancode:	the desired scancode
  * @resize:	controls whether we allowed to resize the table to
- *		accomodate not yet present scancodes
+ *		accommodate not yet present scancodes
  * @return:	index of the mapping containing scancode in question
  *		or -1U in case of failure.
  *
@@ -707,7 +707,8 @@ static void ir_close(struct input_dev *idev)
 {
 	struct rc_dev *rdev = input_get_drvdata(idev);
 
-	rdev->close(rdev);
+	 if (rdev)
+		rdev->close(rdev);
 }
 
 /* class for /sys/class/rc */
@@ -733,6 +734,7 @@ static struct {
 	{ RC_TYPE_SONY,		"sony"		},
 	{ RC_TYPE_RC5_SZ,	"rc-5-sz"	},
 	{ RC_TYPE_LIRC,		"lirc"		},
+	{ RC_TYPE_OTHER,	"other"		},
 };
 
 #define PROTO_NONE	"none"
@@ -1037,7 +1039,7 @@ int rc_register_device(struct rc_dev *dev)
 		goto out_table;
 
 	/*
-	 * Default delay of 250ms is too short for some protocols, expecially
+	 * Default delay of 250ms is too short for some protocols, especially
 	 * since the timeout is currently set to 250ms. Increase it to 500ms,
 	 * to avoid wrong repetition of the keycodes. Note that this must be
 	 * set after the call to input_register_device().
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 4498b944dec..00f51dd121f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -875,7 +875,7 @@ config MX3_VIDEO
 config VIDEO_MX3
 	tristate "i.MX3x Camera Sensor Interface driver"
 	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
-	select VIDEOBUF_DMA_CONTIG
+	select VIDEOBUF2_DMA_CONTIG
 	select MX3_VIDEO
 	---help---
 	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 6ad83a15d07..c03eb29a9ee 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -502,7 +502,7 @@ static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q,
 
 	/* Get the next buffer */
 	*buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue);
-	/* Cleans up buffer - Usefull for testing for frame/URB loss */
+	/* Cleans up buffer - Useful for testing for frame/URB loss */
 	outp = videobuf_to_vmalloc(&(*buf)->vb);
 	memset(outp, 0x00, (*buf)->vb.size);
 
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 242f0d51223..3c9e6c7e7b5 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2244,8 +2244,8 @@ struct tvcard bttv_tvcards[] = {
 	},
 	[BTTV_BOARD_PICOLO_TETRA_CHIP] = {
 		/*Eric DEBIEF <debief@telemsa.com>*/
-		/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
-		/* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
+		/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
+		/* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
 		/*0x79 in bttv.h*/
 		.name           = "Euresys Picolo Tetra",
 		.video_inputs   = 4,
@@ -4567,7 +4567,7 @@ static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
  * at one input while the monitor is looking at another.
  *
  * Since I've couldn't be bothered figuring out how to add an
- * independant muxsel for the monitor bus, I've just set it to
+ * independent muxsel for the monitor bus, I've just set it to
  * whatever the card is looking at.
  *
  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
diff --git a/drivers/media/video/bt8xx/bttv-gpio.c b/drivers/media/video/bt8xx/bttv-gpio.c
index fd604d32bbb..13ce72c04b3 100644
--- a/drivers/media/video/bt8xx/bttv-gpio.c
+++ b/drivers/media/video/bt8xx/bttv-gpio.c
@@ -3,7 +3,7 @@
     bttv-gpio.c  --  gpio sub drivers
 
     sysfs-based sub driver interface for bttv
-    mainly intented for gpio access
+    mainly intended for gpio access
 
 
     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 55ffd60ffa7..66470339849 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -383,7 +383,7 @@ static int cafe_smbus_write_data(struct cafe_camera *cam,
 	 * causes the device to die.
 	 * Use a busy-wait because we often send a large quantity of small
 	 * commands at-once; using msleep() would cause a lot of context
-	 * switches which take longer than 2ms, resulting in a noticable
+	 * switches which take longer than 2ms, resulting in a noticeable
 	 * boot-time and capture-start delays.
 	 */
 	mdelay(2);
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index 188c9c3d2db..e9c69d9c9e4 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -109,7 +109,7 @@ struct cx18_av_state {
 	int is_initialized;
 
 	/*
-	 * The VBI slicer starts operating and counting lines, begining at
+	 * The VBI slicer starts operating and counting lines, beginning at
 	 * slicer line count of 1, at D lines after the deassertion of VRESET.
 	 * This staring field line, S, is 6 (& 319) or 10 (& 273) for 625 or 525
 	 * line systems respectively.  Sliced ancillary data captured on VBI
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 86c30b9963e..4f041c033c5 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -312,7 +312,7 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh,
 
 	/*
 	 * Set the digitizer registers for raw active VBI.
-	 * Note cx18_av_vbi_wipes out alot of the passed in fmt under valid
+	 * Note cx18_av_vbi_wipes out a lot of the passed in fmt under valid
 	 * calling conditions
 	 */
 	ret = v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &fmt->fmt.vbi);
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index c6e2ca3b114..6fbc356113c 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -350,9 +350,17 @@ void cx18_streams_cleanup(struct cx18 *cx, int unregister)
 
 		/* No struct video_device, but can have buffers allocated */
 		if (type == CX18_ENC_STREAM_TYPE_IDX) {
+			/* If the module params didn't inhibit IDX ... */
 			if (cx->stream_buffers[type] != 0) {
 				cx->stream_buffers[type] = 0;
-				cx18_stream_free(&cx->streams[type]);
+				/*
+				 * Before calling cx18_stream_free(),
+				 * check if the IDX stream was actually set up.
+				 * Needed, since the cx18_probe() error path
+				 * exits through here as well as normal clean up
+				 */
+				if (cx->streams[type].buffers != 0)
+					cx18_stream_free(&cx->streams[type]);
 			}
 			continue;
 		}
diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/video/cx18/cx18-vbi.c
index 582227522cf..6d3121ff45a 100644
--- a/drivers/media/video/cx18/cx18-vbi.c
+++ b/drivers/media/video/cx18/cx18-vbi.c
@@ -29,7 +29,7 @@
 /*
  * Raster Reference/Protection (RP) bytes, used in Start/End Active
  * Video codes emitted from the digitzer in VIP 1.x mode, that flag the start
- * of VBI sample or VBI ancilliary data regions in the digitial ratser line.
+ * of VBI sample or VBI ancillary data regions in the digitial ratser line.
  *
  * Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0
  */
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 62843d39817..280df43ca44 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -2577,7 +2577,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
 			break;
 
 		case 6:	/* ts1 parallel mode */
-			cx231xx_info("%s: set ts1 parrallel mode registers\n",
+			cx231xx_info("%s: set ts1 parallel mode registers\n",
 				     __func__);
 			status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
 			status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
diff --git a/drivers/media/video/cx231xx/cx231xx-vbi.c b/drivers/media/video/cx231xx/cx231xx-vbi.c
index 1d914488dbb..1c7a4daafec 100644
--- a/drivers/media/video/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/video/cx231xx/cx231xx-vbi.c
@@ -631,7 +631,7 @@ static inline void get_next_vbi_buf(struct cx231xx_dmaqueue *dma_q,
 	/* Get the next buffer */
 	*buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue);
 
-	/* Cleans up buffer - Usefull for testing for frame/URB loss */
+	/* Cleans up buffer - Useful for testing for frame/URB loss */
 	outp = videobuf_to_vmalloc(&(*buf)->vb);
 	memset(outp, 0, (*buf)->vb.size);
 
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index ffd5af914c4..a69c24d8db0 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -309,7 +309,7 @@ static inline void get_next_buf(struct cx231xx_dmaqueue *dma_q,
 	/* Get the next buffer */
 	*buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue);
 
-	/* Cleans up buffer - Usefull for testing for frame/URB loss */
+	/* Cleans up buffer - Useful for testing for frame/URB loss */
 	outp = videobuf_to_vmalloc(&(*buf)->vb);
 	memset(outp, 0, (*buf)->vb.size);
 
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 3b6e7f28568..caab1bfb79e 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -22,6 +22,7 @@ config VIDEO_CX23885
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_STV0900 if !DVB_FE_CUSTOMISE
 	select DVB_DS3000 if !DVB_FE_CUSTOMISE
+	select DVB_STV0367 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c
index 209b971bd26..c9f15d6dec4 100644
--- a/drivers/media/video/cx23885/cimax2.c
+++ b/drivers/media/video/cx23885/cimax2.c
@@ -449,7 +449,7 @@ int netup_ci_init(struct cx23885_tsport *port)
 		0x04, /* ack active low */
 		0x00, /* LOCK = 0 */
 		0x33, /* serial mode, rising in, rising out, MSB first*/
-		0x31, /* syncronization */
+		0x31, /* synchronization */
 	};
 	int ret;
 
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 8db2797bc7c..c186473fc57 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -214,7 +214,7 @@ struct cx23885_board {
 
 	/* Vendors can and do run the PCIe bridge at different
 	 * clock rates, driven physically by crystals on the PCBs.
-	 * The core has to accomodate this. This allows the user
+	 * The core has to accommodate this. This allows the user
 	 * to add new boards with new frequencys. The value is
 	 * expressed in Hz.
 	 *
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 35796e03524..b7ee2ae7058 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -2,7 +2,7 @@
  *
  * Copyright (C) 2004 Ulf Eklund
  *
- * Based on the saa7115 driver and on the first verison of Chris Kennedy's
+ * Based on the saa7115 driver and on the first version of Chris Kennedy's
  * cx25840 driver.
  *
  * Changes by Tyler Trafford <tatrafford@comcast.net>
@@ -445,7 +445,7 @@ static void cx25840_initialize(struct i2c_client *client)
 	cx25840_write(client, 0x918, 0xa0);
 	cx25840_write(client, 0x919, 0x01);
 
-	/* stereo prefered */
+	/* stereo preferred */
 	cx25840_write(client, 0x809, 0x04);
 	/* AC97 shift */
 	cx25840_write(client, 0x8cf, 0x0f);
@@ -546,7 +546,7 @@ static void cx23885_initialize(struct i2c_client *client)
 	 * Aux PLL
 	 * Initial setup for audio sample clock:
 	 * 48 ksps, 16 bits/sample, x160 multiplier = 122.88 MHz
-	 * Intial I2S output/master clock(?):
+	 * Initial I2S output/master clock(?):
 	 * 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz
 	 */
 	switch (state->id) {
@@ -903,7 +903,7 @@ static void input_change(struct i2c_client *client)
 	} else if (std & V4L2_STD_PAL) {
 		/* Autodetect audio standard and audio system */
 		cx25840_write(client, 0x808, 0xff);
-		/* Since system PAL-L is pretty much non-existant and
+		/* Since system PAL-L is pretty much non-existent and
 		   not used by any public broadcast network, force
 		   6.5 MHz carrier to be interpreted as System DK,
 		   this avoids DK audio detection instability */
@@ -1851,7 +1851,7 @@ static u32 get_cx2388x_ident(struct i2c_client *client)
 			ret = V4L2_IDENT_CX23885_AV;
 		} else {
 			/* CX23887 has a broken DIF, but the registers
-			 * appear valid (but unsed), good enough to detect. */
+			 * appear valid (but unused), good enough to detect. */
 			ret = V4L2_IDENT_CX23887_AV;
 		}
 	} else if (cx25840_read4(client, 0x300) & 0x0fffffff) {
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index c820e2f5352..3f442003623 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -524,7 +524,7 @@ void cx88_ir_irq(struct cx88_core *core)
 	for (todo = 32; todo > 0; todo -= bits) {
 		ev.pulse = samples & 0x80000000 ? false : true;
 		bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
-		ev.duration = (bits * NSEC_PER_SEC) / (1000 * ir_samplerate);
+		ev.duration = (bits * (NSEC_PER_SEC / 1000)) / ir_samplerate;
 		ir_raw_event_store_with_filter(ir->dev, &ev);
 		samples <<= bits;
 	}
diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
index 490aafb34e2..c8b32c1c738 100644
--- a/drivers/media/video/davinci/dm644x_ccdc.c
+++ b/drivers/media/video/davinci/dm644x_ccdc.c
@@ -258,7 +258,7 @@ static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params)
 	/*
 	 * Allocate memory for FPC table if current
 	 * FPC table buffer is not big enough to
-	 * accomodate FPC Number requested
+	 * accommodate FPC Number requested
 	 */
 	if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) {
 		if (fpc_physaddr != NULL) {
@@ -436,7 +436,7 @@ void ccdc_config_ycbcr(void)
 
 	/*
 	 * configure the horizontal line offset. This should be a
-	 * on 32 byte bondary. So clear LSB 5 bits
+	 * on 32 byte boundary. So clear LSB 5 bits
 	 */
 	regw(((params->win.width * 2  + 31) & ~0x1f), CCDC_HSIZE_OFF);
 
diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
index 71e961e53a5..5b38fc93ff2 100644
--- a/drivers/media/video/davinci/vpfe_capture.c
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -1691,7 +1691,7 @@ static int vpfe_s_crop(struct file *file, void *priv,
 		goto unlock_out;
 	}
 
-	/* adjust the width to 16 pixel boundry */
+	/* adjust the width to 16 pixel boundary */
 	crop->c.width = ((crop->c.width + 15) & ~0xf);
 
 	/* make sure parameters are valid */
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index a83131bd00b..7b6461d2d1f 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -377,7 +377,7 @@ static inline void get_next_buf(struct em28xx_dmaqueue *dma_q,
 	/* Get the next buffer */
 	*buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue);
 
-	/* Cleans up buffer - Usefull for testing for frame/URB loss */
+	/* Cleans up buffer - Useful for testing for frame/URB loss */
 	outp = videobuf_to_vmalloc(&(*buf)->vb);
 	memset(outp, 0, (*buf)->vb.size);
 
@@ -404,7 +404,7 @@ static inline void vbi_get_next_buf(struct em28xx_dmaqueue *dma_q,
 
 	/* Get the next buffer */
 	*buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue);
-	/* Cleans up buffer - Usefull for testing for frame/URB loss */
+	/* Cleans up buffer - Useful for testing for frame/URB loss */
 	outp = videobuf_to_vmalloc(&(*buf)->vb);
 	memset(outp, 0x00, (*buf)->vb.size);
 
diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/video/gspca/gl860/gl860-mi1320.c
index c276a7debde..b57160e0486 100644
--- a/drivers/media/video/gspca/gl860/gl860-mi1320.c
+++ b/drivers/media/video/gspca/gl860/gl860-mi1320.c
@@ -201,7 +201,7 @@ void mi1320_init_settings(struct gspca_dev *gspca_dev)
 	sd->vmax.backlight  =  2;
 	sd->vmax.brightness =  8;
 	sd->vmax.sharpness  =  7;
-	sd->vmax.contrast   =  0; /* 10 but not working with tihs driver */
+	sd->vmax.contrast   =  0; /* 10 but not working with this driver */
 	sd->vmax.gamma      = 40;
 	sd->vmax.hue        =  5 + 1;
 	sd->vmax.saturation =  8;
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 9c6a643caf0..e526aa3deda 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -857,7 +857,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 		}
 
 		/* the bandwidth is not wide enough
-		 * negociate or try a lower alternate setting */
+		 * negotiate or try a lower alternate setting */
 		PDEBUG(D_ERR|D_STREAM,
 			"bandwidth not wide enough - trying again");
 		msleep(20);	/* wait for kill complete */
@@ -2346,7 +2346,7 @@ void gspca_disconnect(struct usb_interface *intf)
 	usb_set_intfdata(intf, NULL);
 
 	/* release the device */
-	/* (this will call gspca_release() immediatly or on last close) */
+	/* (this will call gspca_release() immediately or on last close) */
 	video_unregister_device(&gspca_dev->vdev);
 
 /*	PDEBUG(D_PROBE, "disconnect complete"); */
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index cb4d0bf0d78..0196209a948 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -361,7 +361,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		mi_w(gspca_dev, i + 1, mi_data[i]);
 
 	data[0] = 0x00;
-	data[1] = 0x4d;		/* ISOC transfering enable... */
+	data[1] = 0x4d;		/* ISOC transferring enable... */
 	reg_w(gspca_dev, 2);
 
 	gspca_dev->ctrl_inac = 0; /* activate the illuminator controls */
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index 3884c9d300c..97e50796743 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -469,7 +469,7 @@ static void lcd_stop(struct gspca_dev *gspca_dev)
 static int isoc_enable(struct gspca_dev *gspca_dev)
 {
 	gspca_dev->usb_buf[0] = 0x00;
-	gspca_dev->usb_buf[1] = 0x4d;  /* ISOC transfering enable... */
+	gspca_dev->usb_buf[1] = 0x4d;  /* ISOC transferring enable... */
 	return mr_write(gspca_dev, 2);
 }
 
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index fd1b6082c96..36a46fc7873 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -381,7 +381,7 @@ static const struct v4l2_pix_format ov519_sif_mode[] = {
    larger then necessary, however they need to be this big as the ov511 /
    ov518 always fills the entire isoc frame, using 0 padding bytes when
    it doesn't have any data. So with low framerates the amount of data
-   transfered can become quite large (libv4l will remove all the 0 padding
+   transferred can become quite large (libv4l will remove all the 0 padding
    in userspace). */
 static const struct v4l2_pix_format ov518_vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
@@ -4368,7 +4368,7 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
 				gspca_dev->last_packet_type = DISCARD_PACKET;
 				return;
 			}
-			/* Add 11 byte footer to frame, might be usefull */
+			/* Add 11 byte footer to frame, might be useful */
 			gspca_frame_add(gspca_dev, LAST_PACKET, in, 11);
 			return;
 		} else {
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 5a08738fba3..146b459b08d 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -827,7 +827,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		   possible to use less exposure then what the fps maximum
 		   allows by setting register 10. register 10 configures the
 		   actual exposure as quotient of the full exposure, with 0
-		   being no exposure at all (not very usefull) and reg10_max
+		   being no exposure at all (not very useful) and reg10_max
 		   being max exposure possible at that framerate.
 
 		   The code maps our 0 - 510 ms exposure ctrl to these 2
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 45552c3ff8d..3e76951e3c1 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -607,7 +607,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x00, 0x8880, 2);
 	/* family cam Quicksmart stuff */
 	reg_w(gspca_dev, 0x00, 0x800a, 0x00);
-	/* Set agc transfer: synced inbetween frames */
+	/* Set agc transfer: synced between frames */
 	reg_w(gspca_dev, 0x00, 0x820f, 0x01);
 	/* Init SDRAM - needed for SDRAM access */
 	reg_w(gspca_dev, 0x00, 0x870a, 0x04);
@@ -831,7 +831,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 		/* familycam Quicksmart pocketDV stuff */
 		reg_w(gspca_dev, 0x00, 0x800a, 0x00);
-		/* Set agc transfer: synced inbetween frames */
+		/* Set agc transfer: synced between frames */
 		reg_w(gspca_dev, 0x00, 0x820f, 0x01);
 		/* Init SDRAM - needed for SDRAM access */
 		reg_w(gspca_dev, 0x00, 0x870a, 0x04);
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 34831937152..41dce49fb43 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -592,7 +592,7 @@ static const u16 spca508_sightcam_init_data[][2] = {
 /* This line seems to setup the frame/canvas */
 	{0x000f, 0x8402},
 
-/* Theese 6 lines are needed to startup the webcam */
+/* These 6 lines are needed to startup the webcam */
 	{0x0090, 0x8110},
 	{0x0001, 0x8114},
 	{0x0001, 0x8114},
diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c
index 2e9c0617519..5ba96aff225 100644
--- a/drivers/media/video/gspca/sq905.c
+++ b/drivers/media/video/gspca/sq905.c
@@ -22,7 +22,7 @@
  * History and Acknowledgments
  *
  * The original Linux driver for SQ905 based cameras was written by
- * Marcell Lengyel and furter developed by many other contributers
+ * Marcell Lengyel and furter developed by many other contributors
  * and is available from http://sourceforge.net/projects/sqcam/
  *
  * This driver takes advantage of the reverse engineering work done for
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 17531b41a07..b8156855f2b 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -569,7 +569,7 @@ static int hdcs_init(struct sd *sd)
 	if (err < 0)
 		return err;
 
-	/* Enable continous frame capture, bit 2: stop when frame complete */
+	/* Enable continuous frame capture, bit 2: stop when frame complete */
 	err = stv06xx_write_sensor(sd, HDCS_REG_CONFIG(sd), BIT(3));
 	if (err < 0)
 		return err;
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index cdf8b191f71..cbc505a2fc2 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -261,7 +261,7 @@ static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
 
 /* the saa7146 provides some controls (brightness, contrast, saturation)
    which gets registered *after* this function. because of this we have
-   to return with a value != 0 even if the function succeded.. */
+   to return with a value != 0 even if the function succeeded.. */
 static int vidioc_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qc)
 {
 	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c
index 1a116911571..0382ea752e6 100644
--- a/drivers/media/video/imx074.c
+++ b/drivers/media/video/imx074.c
@@ -298,7 +298,7 @@ static unsigned long imx074_query_bus_param(struct soc_camera_device *icd)
 static int imx074_set_bus_param(struct soc_camera_device *icd,
 				 unsigned long flags)
 {
-	return -1;
+	return -EINVAL;
 }
 
 static struct soc_camera_ops imx074_ops = {
diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c
index 4df01947a7d..14a1cea1d70 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.c
+++ b/drivers/media/video/ivtv/ivtv-firmware.c
@@ -179,7 +179,7 @@ static volatile struct ivtv_mailbox __iomem *ivtv_search_mailbox(const volatile
 {
 	int i;
 
-	/* mailbox is preceeded by a 16 byte 'magic cookie' starting at a 256-byte
+	/* mailbox is preceded by a 16 byte 'magic cookie' starting at a 256-byte
 	   address boundary */
 	for (i = 0; i < size; i += 0x100) {
 		if (readl(mem + i)      == 0x12345678 &&
@@ -377,7 +377,7 @@ int ivtv_firmware_check(struct ivtv *itv, char *where)
 			  "Reloading\n", where);
 		res = ivtv_firmware_restart(itv);
 		/*
-		 * Even if restarted ok, still signal a problem had occured.
+		 * Even if restarted ok, still signal a problem had occurred.
 		 * The caller can come through this function again to check
 		 * if things are really ok after the restart.
 		 */
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index f0316d02f09..17247451c69 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -1080,7 +1080,7 @@ static int ivtvfb_init_vidmode(struct ivtv *itv)
 		kmalloc(sizeof(u32) * 16, GFP_KERNEL|__GFP_NOWARN);
 
 	if (!oi->ivtvfb_info.pseudo_palette) {
-		IVTVFB_ERR("abort, unable to alloc pseudo pallete\n");
+		IVTVFB_ERR("abort, unable to alloc pseudo palette\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c
index 5e1c9a81984..303ffa7df4a 100644
--- a/drivers/media/video/m52790.c
+++ b/drivers/media/video/m52790.c
@@ -174,7 +174,7 @@ static int m52790_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct m52790_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct m52790_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index b1763ac93ab..8126622fb4f 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -69,7 +69,7 @@ MODULE_LICENSE("GPL");
 /* module parameters */
 static int opmode   = OPMODE_AUTO;
 int msp_debug;		 /* msp_debug output */
-int msp_once;		 /* no continous stereo monitoring */
+int msp_once;		 /* no continuous stereo monitoring */
 int msp_amsound;	 /* hard-wire AM sound at 6.5 Hz (france),
 			    the autoscan seems work well only with FM... */
 int msp_standard = 1;    /* Override auto detect of audio msp_standard,
@@ -551,7 +551,7 @@ static int msp_log_status(struct v4l2_subdev *sd)
 	switch (state->mode) {
 		case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break;
 		case MSP_MODE_FM_RADIO: p = "FM Radio"; break;
-		case MSP_MODE_FM_TERRA: p = "Terrestial FM-mono/stereo"; break;
+		case MSP_MODE_FM_TERRA: p = "Terrestrial FM-mono/stereo"; break;
 		case MSP_MODE_FM_SAT: p = "Satellite FM-mono"; break;
 		case MSP_MODE_FM_NICAM1: p = "NICAM/FM (B/G, D/K)"; break;
 		case MSP_MODE_FM_NICAM2: p = "NICAM/FM (I)"; break;
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index b376fcdee65..80387e2c3ec 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -87,7 +87,7 @@ static struct msp3400c_init_data_dem {
 		{-8, -8, 4, 6, 78, 107},
 		MSP_CARRIER(10.7), MSP_CARRIER(10.7),
 		0x00d0, 0x0480, 0x0020, 0x3000
-	}, {	/* Terrestial FM-mono + FM-stereo */
+	}, {	/* Terrestrial FM-mono + FM-stereo */
 		{3, 18, 27, 48, 66, 72},
 		{3, 18, 27, 48, 66, 72},
 		MSP_CARRIER(5.5), MSP_CARRIER(5.5),
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 029a4babfd6..d4fe7bc92a1 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -473,7 +473,7 @@ static int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
 /*
  * Convert V4L2 rotation to DSS rotation
  *	V4L2 understand 0, 90, 180, 270.
- *	Convert to 0, 1, 2 and 3 repsectively for DSS
+ *	Convert to 0, 1, 2 and 3 respectively for DSS
  */
 static int v4l2_rot_to_dss_rot(int v4l2_rotation,
 			enum dss_rotation *rotation, bool mirror)
@@ -1142,7 +1142,7 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 }
 
 /*
- * Buffer queue funtion will be called from the videobuf layer when _QBUF
+ * Buffer queue function will be called from the videobuf layer when _QBUF
  * ioctl is called. It is used to enqueue buffer, which is ready to be
  * displayed.
  */
diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c
index b941c761eef..2aa6a76c5e5 100644
--- a/drivers/media/video/omap/omap_voutlib.c
+++ b/drivers/media/video/omap/omap_voutlib.c
@@ -53,7 +53,7 @@ EXPORT_SYMBOL_GPL(omap_vout_default_crop);
 /* Given a new render window in new_win, adjust the window to the
  * nearest supported configuration.  The adjusted window parameters are
  * returned in new_win.
- * Returns zero if succesful, or -EINVAL if the requested window is
+ * Returns zero if successful, or -EINVAL if the requested window is
  * impossible and cannot reasonably be adjusted.
  */
 int omap_vout_try_window(struct v4l2_framebuffer *fbuf,
@@ -101,7 +101,7 @@ EXPORT_SYMBOL_GPL(omap_vout_try_window);
  * will also be adjusted if necessary.  Preference is given to keeping the
  * the window as close to the requested configuration as possible.  If
  * successful, new_win, vout->win, and crop are updated.
- * Returns zero if succesful, or -EINVAL if the requested preview window is
+ * Returns zero if successful, or -EINVAL if the requested preview window is
  * impossible and cannot reasonably be adjusted.
  */
 int omap_vout_new_window(struct v4l2_rect *crop,
@@ -155,7 +155,7 @@ EXPORT_SYMBOL_GPL(omap_vout_new_window);
  * window would fall outside the display boundaries, the cropping rectangle
  * will also be adjusted to maintain the rescaling ratios.  If successful, crop
  * and win are updated.
- * Returns zero if succesful, or -EINVAL if the requested cropping rectangle is
+ * Returns zero if successful, or -EINVAL if the requested cropping rectangle is
  * impossible and cannot reasonably be adjusted.
  */
 int omap_vout_new_crop(struct v4l2_pix_format *pix,
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index eab31cbd68e..5954b930663 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -687,7 +687,7 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
 		 * In CONTIG mode, the current buffer parameters had already
 		 * been entered into the DMA programming register set while the
 		 * buffer was fetched with prepare_next_vb(), they may have also
-		 * been transfered into the runtime set and already active if
+		 * been transferred into the runtime set and already active if
 		 * the DMA still running.
 		 */
 	} else {
@@ -835,7 +835,7 @@ static irqreturn_t cam_isr(int irq, void *data)
 				/*
 				 * If exactly 2 sgbufs from the next sglist have
 				 * been programmed into the DMA engine (the
-				 * frist one already transfered into the DMA
+				 * first one already transferred into the DMA
 				 * runtime register set, the second one still
 				 * in the programming set), then we are in sync.
 				 */
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 1a9963bd6d4..472a69359e6 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -215,20 +215,21 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel)
 	}
 
 	switch (xclksel) {
-	case 0:
+	case ISP_XCLK_A:
 		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL,
 				ISPTCTRL_CTRL_DIVA_MASK,
 				divisor << ISPTCTRL_CTRL_DIVA_SHIFT);
 		dev_dbg(isp->dev, "isp_set_xclk(): cam_xclka set to %d Hz\n",
 			currentxclk);
 		break;
-	case 1:
+	case ISP_XCLK_B:
 		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL,
 				ISPTCTRL_CTRL_DIVB_MASK,
 				divisor << ISPTCTRL_CTRL_DIVB_SHIFT);
 		dev_dbg(isp->dev, "isp_set_xclk(): cam_xclkb set to %d Hz\n",
 			currentxclk);
 		break;
+	case ISP_XCLK_NONE:
 	default:
 		omap3isp_put(isp);
 		dev_dbg(isp->dev, "ISP_ERR: isp_set_xclk(): Invalid requested "
@@ -237,13 +238,13 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel)
 	}
 
 	/* Do we go from stable whatever to clock? */
-	if (divisor >= 2 && isp->xclk_divisor[xclksel] < 2)
+	if (divisor >= 2 && isp->xclk_divisor[xclksel - 1] < 2)
 		omap3isp_get(isp);
 	/* Stopping the clock. */
-	else if (divisor < 2 && isp->xclk_divisor[xclksel] >= 2)
+	else if (divisor < 2 && isp->xclk_divisor[xclksel - 1] >= 2)
 		omap3isp_put(isp);
 
-	isp->xclk_divisor[xclksel] = divisor;
+	isp->xclk_divisor[xclksel - 1] = divisor;
 
 	omap3isp_put(isp);
 
@@ -285,7 +286,8 @@ static void isp_power_settings(struct isp_device *isp, int idle)
  */
 void omap3isp_configure_bridge(struct isp_device *isp,
 			       enum ccdc_input_entity input,
-			       const struct isp_parallel_platform_data *pdata)
+			       const struct isp_parallel_platform_data *pdata,
+			       unsigned int shift)
 {
 	u32 ispctrl_val;
 
@@ -298,9 +300,9 @@ void omap3isp_configure_bridge(struct isp_device *isp,
 	switch (input) {
 	case CCDC_INPUT_PARALLEL:
 		ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL;
-		ispctrl_val |= pdata->data_lane_shift << ISPCTRL_SHIFT_SHIFT;
 		ispctrl_val |= pdata->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT;
 		ispctrl_val |= pdata->bridge << ISPCTRL_PAR_BRIDGE_SHIFT;
+		shift += pdata->data_lane_shift * 2;
 		break;
 
 	case CCDC_INPUT_CSI2A:
@@ -319,6 +321,8 @@ void omap3isp_configure_bridge(struct isp_device *isp,
 		return;
 	}
 
+	ispctrl_val |= ((shift/2) << ISPCTRL_SHIFT_SHIFT) & ISPCTRL_SHIFT_MASK;
+
 	ispctrl_val &= ~ISPCTRL_SYNC_DETECT_MASK;
 	ispctrl_val |= ISPCTRL_SYNC_DETECT_VSRISE;
 
@@ -658,6 +662,8 @@ int omap3isp_pipeline_pm_use(struct media_entity *entity, int use)
 
 	/* Apply power change to connected non-nodes. */
 	ret = isp_pipeline_pm_power(entity, change);
+	if (ret < 0)
+		entity->use_count -= change;
 
 	mutex_unlock(&entity->parent->graph_mutex);
 
@@ -715,7 +721,7 @@ static int isp_pipeline_link_notify(struct media_pad *source,
  * Walk the entities chain starting at the pipeline output video node and start
  * all modules in the chain in the given mode.
  *
- * Return 0 if successfull, or the return value of the failed video::s_stream
+ * Return 0 if successful, or the return value of the failed video::s_stream
  * operation otherwise.
  */
 static int isp_pipeline_enable(struct isp_pipeline *pipe,
@@ -872,6 +878,9 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe)
 		}
 	}
 
+	if (failure < 0)
+		isp->needs_reset = true;
+
 	return failure;
 }
 
@@ -883,8 +892,9 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe)
  * Set the pipeline to the given stream state. Pipelines can be started in
  * single-shot or continuous mode.
  *
- * Return 0 if successfull, or the return value of the failed video::s_stream
- * operation otherwise.
+ * Return 0 if successful, or the return value of the failed video::s_stream
+ * operation otherwise. The pipeline state is not updated when the operation
+ * fails, except when stopping the pipeline.
  */
 int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe,
 				 enum isp_pipeline_stream_state state)
@@ -895,7 +905,9 @@ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe,
 		ret = isp_pipeline_disable(pipe);
 	else
 		ret = isp_pipeline_enable(pipe, state);
-	pipe->stream_state = state;
+
+	if (ret == 0 || state == ISP_PIPELINE_STREAM_STOPPED)
+		pipe->stream_state = state;
 
 	return ret;
 }
@@ -1283,7 +1295,7 @@ static void __isp_subclk_update(struct isp_device *isp)
 		clk |= ISPCTRL_RSZ_CLK_EN;
 
 	/* NOTE: For CCDC & Preview submodules, we need to affect internal
-	 *       RAM aswell.
+	 *       RAM as well.
 	 */
 	if (isp->subclk_resources & OMAP3_ISP_SUBCLK_CCDC)
 		clk |= ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN;
@@ -1431,7 +1443,7 @@ static int isp_get_clocks(struct isp_device *isp)
  * Increment the reference count on the ISP. If the first reference is taken,
  * enable clocks and power-up all submodules.
  *
- * Return a pointer to the ISP device structure, or NULL if an error occured.
+ * Return a pointer to the ISP device structure, or NULL if an error occurred.
  */
 struct isp_device *omap3isp_get(struct isp_device *isp)
 {
@@ -1481,6 +1493,10 @@ void omap3isp_put(struct isp_device *isp)
 	if (--isp->ref_count == 0) {
 		isp_disable_interrupts(isp);
 		isp_save_ctx(isp);
+		if (isp->needs_reset) {
+			isp_reset(isp);
+			isp->needs_reset = false;
+		}
 		isp_disable_clocks(isp);
 	}
 	mutex_unlock(&isp->isp_mutex);
diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h
index cf5214e95a9..2620c405f5e 100644
--- a/drivers/media/video/omap3isp/isp.h
+++ b/drivers/media/video/omap3isp/isp.h
@@ -132,7 +132,6 @@ struct isp_reg {
 
 /**
  * struct isp_parallel_platform_data - Parallel interface platform data
- * @width: Parallel bus width in bits (8, 10, 11 or 12)
  * @data_lane_shift: Data lane shifter
  *		0 - CAMEXT[13:0] -> CAM[13:0]
  *		1 - CAMEXT[13:2] -> CAM[11:0]
@@ -146,7 +145,6 @@ struct isp_reg {
  *		ISPCTRL_PAR_BRIDGE_BENDIAN - Big endian
  */
 struct isp_parallel_platform_data {
-	unsigned int width;
 	unsigned int data_lane_shift:2;
 	unsigned int clk_pol:1;
 	unsigned int bridge:4;
@@ -262,6 +260,7 @@ struct isp_device {
 	/* ISP Obj */
 	spinlock_t stat_lock;	/* common lock for statistic drivers */
 	struct mutex isp_mutex;	/* For handling ref_count field */
+	bool needs_reset;
 	int has_context;
 	int ref_count;
 	unsigned int autoidle;
@@ -311,11 +310,12 @@ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe,
 				 enum isp_pipeline_stream_state state);
 void omap3isp_configure_bridge(struct isp_device *isp,
 			       enum ccdc_input_entity input,
-			       const struct isp_parallel_platform_data *pdata);
+			       const struct isp_parallel_platform_data *pdata,
+			       unsigned int shift);
 
-#define ISP_XCLK_NONE			-1
-#define ISP_XCLK_A			0
-#define ISP_XCLK_B			1
+#define ISP_XCLK_NONE			0
+#define ISP_XCLK_A			1
+#define ISP_XCLK_B			2
 
 struct isp_device *omap3isp_get(struct isp_device *isp);
 void omap3isp_put(struct isp_device *isp);
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 5ff9d14ce71..39d501bda63 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -43,6 +43,12 @@ __ccdc_get_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh,
 
 static const unsigned int ccdc_fmts[] = {
 	V4L2_MBUS_FMT_Y8_1X8,
+	V4L2_MBUS_FMT_Y10_1X10,
+	V4L2_MBUS_FMT_Y12_1X12,
+	V4L2_MBUS_FMT_SGRBG8_1X8,
+	V4L2_MBUS_FMT_SRGGB8_1X8,
+	V4L2_MBUS_FMT_SBGGR8_1X8,
+	V4L2_MBUS_FMT_SGBRG8_1X8,
 	V4L2_MBUS_FMT_SGRBG10_1X10,
 	V4L2_MBUS_FMT_SRGGB10_1X10,
 	V4L2_MBUS_FMT_SBGGR10_1X10,
@@ -1110,21 +1116,38 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc)
 	struct isp_parallel_platform_data *pdata = NULL;
 	struct v4l2_subdev *sensor;
 	struct v4l2_mbus_framefmt *format;
+	const struct isp_format_info *fmt_info;
+	struct v4l2_subdev_format fmt_src;
+	unsigned int depth_out;
+	unsigned int depth_in = 0;
 	struct media_pad *pad;
 	unsigned long flags;
+	unsigned int shift;
 	u32 syn_mode;
 	u32 ccdc_pattern;
 
-	if (ccdc->input == CCDC_INPUT_PARALLEL) {
-		pad = media_entity_remote_source(&ccdc->pads[CCDC_PAD_SINK]);
-		sensor = media_entity_to_v4l2_subdev(pad->entity);
+	pad = media_entity_remote_source(&ccdc->pads[CCDC_PAD_SINK]);
+	sensor = media_entity_to_v4l2_subdev(pad->entity);
+	if (ccdc->input == CCDC_INPUT_PARALLEL)
 		pdata = &((struct isp_v4l2_subdevs_group *)sensor->host_priv)
 			->bus.parallel;
+
+	/* Compute shift value for lane shifter to configure the bridge. */
+	fmt_src.pad = pad->index;
+	fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	if (!v4l2_subdev_call(sensor, pad, get_fmt, NULL, &fmt_src)) {
+		fmt_info = omap3isp_video_format_info(fmt_src.format.code);
+		depth_in = fmt_info->bpp;
 	}
 
-	omap3isp_configure_bridge(isp, ccdc->input, pdata);
+	fmt_info = omap3isp_video_format_info
+		(isp->isp_ccdc.formats[CCDC_PAD_SINK].code);
+	depth_out = fmt_info->bpp;
+
+	shift = depth_in - depth_out;
+	omap3isp_configure_bridge(isp, ccdc->input, pdata, shift);
 
-	ccdc->syncif.datsz = pdata ? pdata->width : 10;
+	ccdc->syncif.datsz = depth_out;
 	ccdc_config_sync_if(ccdc, &ccdc->syncif);
 
 	/* CCDC_PAD_SINK */
@@ -1338,7 +1361,7 @@ static int ccdc_sbl_wait_idle(struct isp_ccdc_device *ccdc,
  * @ccdc: Pointer to ISP CCDC device.
  * @event: Pointing which event trigger handler
  *
- * Return 1 when the event and stopping request combination is satisfyied,
+ * Return 1 when the event and stopping request combination is satisfied,
  * zero otherwise.
  */
 static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event)
@@ -1618,7 +1641,7 @@ static int ccdc_video_queue(struct isp_video *video, struct isp_buffer *buffer)
 
 	ccdc_set_outaddr(ccdc, buffer->isp_addr);
 
-	/* We now have a buffer queued on the output, restart the pipeline in
+	/* We now have a buffer queued on the output, restart the pipeline
 	 * on the next CCDC interrupt if running in continuous mode (or when
 	 * starting the stream).
 	 */
diff --git a/drivers/media/video/omap3isp/ispccdc.h b/drivers/media/video/omap3isp/ispccdc.h
index d403af5d31d..483a19cac1a 100644
--- a/drivers/media/video/omap3isp/ispccdc.h
+++ b/drivers/media/video/omap3isp/ispccdc.h
@@ -150,7 +150,7 @@ struct ispccdc_lsc {
  * @input: Active input
  * @output: Active outputs
  * @video_out: Output video node
- * @error: A hardware error occured during capture
+ * @error: A hardware error occurred during capture
  * @alaw: A-law compression enabled (1) or disabled (0)
  * @lpf: Low pass filter enabled (1) or disabled (0)
  * @obclamp: Optical-black clamp enabled (1) or disabled (0)
@@ -163,7 +163,7 @@ struct ispccdc_lsc {
  * @shadow_update: Controls update in progress by userspace
  * @syncif: Interface synchronization configuration
  * @vpcfg: Video port configuration
- * @underrun: A buffer underrun occured and a new buffer has been queued
+ * @underrun: A buffer underrun occurred and a new buffer has been queued
  * @state: Streaming state
  * @lock: Serializes shadow_update with interrupt handler
  * @wait: Wait queue used to stop the module
diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
index 0efef2e78d9..0e16cab8e08 100644
--- a/drivers/media/video/omap3isp/ispccp2.c
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -772,7 +772,7 @@ static int ccp2_enum_frame_size(struct v4l2_subdev *sd,
  * @sd    : pointer to v4l2 subdev structure
  * @fh    : V4L2 subdev file handle
  * @fmt   : pointer to v4l2 subdev format structure
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 			      struct v4l2_subdev_format *fmt)
diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/video/omap3isp/ispcsi2.c
index fb503f3db3b..69161a682b3 100644
--- a/drivers/media/video/omap3isp/ispcsi2.c
+++ b/drivers/media/video/omap3isp/ispcsi2.c
@@ -969,7 +969,7 @@ static int csi2_enum_frame_size(struct v4l2_subdev *sd,
  * @sd : pointer to v4l2 subdev structure
  * @fh : V4L2 subdev file handle
  * @fmt: pointer to v4l2 subdev format structure
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 			   struct v4l2_subdev_format *fmt)
diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
index baf9374201d..aba537af87e 100644
--- a/drivers/media/video/omap3isp/isppreview.c
+++ b/drivers/media/video/omap3isp/isppreview.c
@@ -34,7 +34,7 @@
 #include "ispreg.h"
 #include "isppreview.h"
 
-/* Default values in Office Flourescent Light for RGBtoRGB Blending */
+/* Default values in Office Fluorescent Light for RGBtoRGB Blending */
 static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
 	{	/* RGB-RGB Matrix */
 		{0x01E2, 0x0F30, 0x0FEE},
@@ -44,7 +44,7 @@ static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
 	{0x0000, 0x0000, 0x0000}
 };
 
-/* Default values in Office Flourescent Light for RGB to YUV Conversion*/
+/* Default values in Office Fluorescent Light for RGB to YUV Conversion*/
 static struct omap3isp_prev_csc flr_prev_csc = {
 	{	/* CSC Coef Matrix */
 		{66, 129, 25},
@@ -54,22 +54,22 @@ static struct omap3isp_prev_csc flr_prev_csc = {
 	{0x0, 0x0, 0x0}
 };
 
-/* Default values in Office Flourescent Light for CFA Gradient*/
+/* Default values in Office Fluorescent Light for CFA Gradient*/
 #define FLR_CFA_GRADTHRS_HORZ	0x28
 #define FLR_CFA_GRADTHRS_VERT	0x28
 
-/* Default values in Office Flourescent Light for Chroma Suppression*/
+/* Default values in Office Fluorescent Light for Chroma Suppression*/
 #define FLR_CSUP_GAIN		0x0D
 #define FLR_CSUP_THRES		0xEB
 
-/* Default values in Office Flourescent Light for Noise Filter*/
+/* Default values in Office Fluorescent Light for Noise Filter*/
 #define FLR_NF_STRGTH		0x03
 
 /* Default values for White Balance */
 #define FLR_WBAL_DGAIN		0x100
 #define FLR_WBAL_COEF		0x20
 
-/* Default values in Office Flourescent Light for Black Adjustment*/
+/* Default values in Office Fluorescent Light for Black Adjustment*/
 #define FLR_BLKADJ_BLUE		0x0
 #define FLR_BLKADJ_GREEN	0x0
 #define FLR_BLKADJ_RED		0x0
@@ -137,7 +137,7 @@ preview_enable_invalaw(struct isp_prev_device *prev, u8 enable)
  * @enable: 1 - Enable, 0 - Disable
  *
  * NOTE: PRV_WSDR_ADDR and PRV_WADD_OFFSET must be set also
- * The proccess is applied for each captured frame.
+ * The process is applied for each captured frame.
  */
 static void
 preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable)
@@ -157,7 +157,7 @@ preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable)
  * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is
  *          subtracted with the pixels in the current frame.
  *
- * The proccess is applied for each captured frame.
+ * The process is applied for each captured frame.
  */
 static void
 preview_enable_drkframe(struct isp_prev_device *prev, u8 enable)
@@ -755,7 +755,7 @@ static struct preview_update update_attrs[] = {
  * @configs - pointer to update config structure.
  * @config - return pointer to appropriate structure field.
  * @bit - for which feature to return pointers.
- * Return size of coresponding prev_params member
+ * Return size of corresponding prev_params member
  */
 static u32
 __preview_get_ptrs(struct prev_params *params, void **param,
@@ -1528,7 +1528,7 @@ static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
  * preview_set_stream - Enable/Disable streaming on preview subdev
  * @sd    : pointer to v4l2 subdev structure
  * @enable: 1 == Enable, 0 == Disable
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int preview_set_stream(struct v4l2_subdev *sd, int enable)
 {
@@ -1780,7 +1780,7 @@ static int preview_enum_frame_size(struct v4l2_subdev *sd,
  * @sd : pointer to v4l2 subdev structure
  * @fh : V4L2 subdev file handle
  * @fmt: pointer to v4l2 subdev format structure
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 			      struct v4l2_subdev_format *fmt)
diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/video/omap3isp/isppreview.h
index f2d63ca4bd6..fa943bd05c7 100644
--- a/drivers/media/video/omap3isp/isppreview.h
+++ b/drivers/media/video/omap3isp/isppreview.h
@@ -163,7 +163,7 @@ struct isptables_update {
  * @output: Bitmask of the active output
  * @video_in: Input video entity
  * @video_out: Output video entity
- * @error: A hardware error occured during capture
+ * @error: A hardware error occurred during capture
  * @params: Module configuration data
  * @shadow_update: If set, update the hardware configured in the next interrupt
  * @underrun: Whether the preview entity has queued buffers on the output
diff --git a/drivers/media/video/omap3isp/ispqueue.c b/drivers/media/video/omap3isp/ispqueue.c
index 8fddc5806b0..9c317148205 100644
--- a/drivers/media/video/omap3isp/ispqueue.c
+++ b/drivers/media/video/omap3isp/ispqueue.c
@@ -339,7 +339,7 @@ static int isp_video_buffer_prepare_user(struct isp_video_buffer *buf)
 	up_read(&current->mm->mmap_sem);
 
 	if (ret != buf->npages) {
-		buf->npages = ret;
+		buf->npages = ret < 0 ? 0 : ret;
 		isp_video_buffer_cleanup(buf);
 		return -EFAULT;
 	}
@@ -408,8 +408,8 @@ done:
  * isp_video_buffer_prepare_vm_flags - Get VMA flags for a userspace address
  *
  * This function locates the VMAs for the buffer's userspace address and checks
- * that their flags match. The onlflag that we need to care for at the moment is
- * VM_PFNMAP.
+ * that their flags match. The only flag that we need to care for at the moment
+ * is VM_PFNMAP.
  *
  * The buffer vm_flags field is set to the first VMA flags.
  *
diff --git a/drivers/media/video/omap3isp/ispqueue.h b/drivers/media/video/omap3isp/ispqueue.h
index 251de3e1679..92c5a12157d 100644
--- a/drivers/media/video/omap3isp/ispqueue.h
+++ b/drivers/media/video/omap3isp/ispqueue.h
@@ -46,9 +46,9 @@ struct scatterlist;
  *	device yet.
  * @ISP_BUF_STATE_ACTIVE: The buffer is in use for an active video transfer.
  * @ISP_BUF_STATE_ERROR: The device is done with the buffer and an error
- *	occured. For capture device the buffer likely contains corrupted data or
+ *	occurred. For capture device the buffer likely contains corrupted data or
  *	no data at all.
- * @ISP_BUF_STATE_DONE: The device is done with the buffer and no error occured.
+ * @ISP_BUF_STATE_DONE: The device is done with the buffer and no error occurred.
  *	For capture devices the buffer contains valid data.
  */
 enum isp_video_buffer_state {
diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c
index 75d39b115d4..0bb0f8cd36f 100644
--- a/drivers/media/video/omap3isp/ispresizer.c
+++ b/drivers/media/video/omap3isp/ispresizer.c
@@ -714,19 +714,50 @@ static void resizer_print_status(struct isp_res_device *res)
  * iw and ih are the input width and height after cropping. Those equations need
  * to be satisfied exactly for the resizer to work correctly.
  *
- * Reverting the equations, we can compute the resizing ratios with
+ * The equations can't be easily reverted, as the >> 8 operation is not linear.
+ * In addition, not all input sizes can be achieved for a given output size. To
+ * get the highest input size lower than or equal to the requested input size,
+ * we need to compute the highest resizing ratio that satisfies the following
+ * inequality (taking the 4-tap mode width equation as an example)
+ *
+ *	iw >= (32 * sph + (ow - 1) * hrsz + 16) >> 8 - 7
+ *
+ * (where iw is the requested input width) which can be rewritten as
+ *
+ *	  iw - 7            >= (32 * sph + (ow - 1) * hrsz + 16) >> 8
+ *	 (iw - 7) << 8      >=  32 * sph + (ow - 1) * hrsz + 16 - b
+ *	((iw - 7) << 8) + b >=  32 * sph + (ow - 1) * hrsz + 16
+ *
+ * where b is the value of the 8 least significant bits of the right hand side
+ * expression of the last inequality. The highest resizing ratio value will be
+ * achieved when b is equal to its maximum value of 255. That resizing ratio
+ * value will still satisfy the original inequality, as b will disappear when
+ * the expression will be shifted right by 8.
+ *
+ * The reverted the equations thus become
  *
  * - 8-phase, 4-tap mode
- *	hrsz = ((iw - 7) * 256 - 16 - 32 * sph) / (ow - 1)
- *	vrsz = ((ih - 4) * 256 - 16 - 32 * spv) / (oh - 1)
+ *	hrsz = ((iw - 7) * 256 + 255 - 16 - 32 * sph) / (ow - 1)
+ *	vrsz = ((ih - 4) * 256 + 255 - 16 - 32 * spv) / (oh - 1)
  * - 4-phase, 7-tap mode
- *	hrsz = ((iw - 7) * 256 - 32 - 64 * sph) / (ow - 1)
- *	vrsz = ((ih - 7) * 256 - 32 - 64 * spv) / (oh - 1)
+ *	hrsz = ((iw - 7) * 256 + 255 - 32 - 64 * sph) / (ow - 1)
+ *	vrsz = ((ih - 7) * 256 + 255 - 32 - 64 * spv) / (oh - 1)
+ *
+ * The ratios are integer values, and are rounded down to ensure that the
+ * cropped input size is not bigger than the uncropped input size.
  *
- * The ratios are integer values, and must be rounded down to ensure that the
- * cropped input size is not bigger than the uncropped input size. As the ratio
- * in 7-tap mode is always smaller than the ratio in 4-tap mode, we can use the
- * 7-tap mode equations to compute a ratio approximation.
+ * As the number of phases/taps, used to select the correct equations to compute
+ * the ratio, depends on the ratio, we start with the 4-tap mode equations to
+ * compute an approximation of the ratio, and switch to the 7-tap mode equations
+ * if the approximation is higher than the ratio threshold.
+ *
+ * As the 7-tap mode equations will return a ratio smaller than or equal to the
+ * 4-tap mode equations, the resulting ratio could become lower than or equal to
+ * the ratio threshold. This 'equations loop' isn't an issue as long as the
+ * correct equations are used to compute the final input size. Starting with the
+ * 4-tap mode equations ensure that, in case of values resulting in a 'ratio
+ * loop', the smallest of the ratio values will be used, never exceeding the
+ * requested input size.
  *
  * We first clamp the output size according to the hardware capabilitie to avoid
  * auto-cropping the input more than required to satisfy the TRM equations. The
@@ -751,7 +782,7 @@ static void resizer_print_status(struct isp_res_device *res)
  * ratio will thus result in a resizing factor slightly larger than the
  * requested value.
  *
- * To accomodate that, and make sure the TRM equations are satisfied exactly, we
+ * To accommodate that, and make sure the TRM equations are satisfied exactly, we
  * compute the input crop rectangle as the last step.
  *
  * As if the situation wasn't complex enough, the maximum output width depends
@@ -775,6 +806,8 @@ static void resizer_calc_ratios(struct isp_res_device *res,
 	unsigned int max_width;
 	unsigned int max_height;
 	unsigned int width_alignment;
+	unsigned int width;
+	unsigned int height;
 
 	/*
 	 * Clamp the output height based on the hardware capabilities and
@@ -786,19 +819,22 @@ static void resizer_calc_ratios(struct isp_res_device *res,
 	max_height = min_t(unsigned int, max_height, MAX_OUT_HEIGHT);
 	output->height = clamp(output->height, min_height, max_height);
 
-	ratio->vert = ((input->height - 7) * 256 - 32 - 64 * spv)
+	ratio->vert = ((input->height - 4) * 256 + 255 - 16 - 32 * spv)
 		    / (output->height - 1);
+	if (ratio->vert > MID_RESIZE_VALUE)
+		ratio->vert = ((input->height - 7) * 256 + 255 - 32 - 64 * spv)
+			    / (output->height - 1);
 	ratio->vert = clamp_t(unsigned int, ratio->vert,
 			      MIN_RESIZE_VALUE, MAX_RESIZE_VALUE);
 
 	if (ratio->vert <= MID_RESIZE_VALUE) {
 		upscaled_height = (output->height - 1) * ratio->vert
 				+ 32 * spv + 16;
-		input->height = (upscaled_height >> 8) + 4;
+		height = (upscaled_height >> 8) + 4;
 	} else {
 		upscaled_height = (output->height - 1) * ratio->vert
 				+ 64 * spv + 32;
-		input->height = (upscaled_height >> 8) + 7;
+		height = (upscaled_height >> 8) + 7;
 	}
 
 	/*
@@ -854,20 +890,29 @@ static void resizer_calc_ratios(struct isp_res_device *res,
 			      max_width & ~(width_alignment - 1));
 	output->width = ALIGN(output->width, width_alignment);
 
-	ratio->horz = ((input->width - 7) * 256 - 32 - 64 * sph)
+	ratio->horz = ((input->width - 7) * 256 + 255 - 16 - 32 * sph)
 		    / (output->width - 1);
+	if (ratio->horz > MID_RESIZE_VALUE)
+		ratio->horz = ((input->width - 7) * 256 + 255 - 32 - 64 * sph)
+			    / (output->width - 1);
 	ratio->horz = clamp_t(unsigned int, ratio->horz,
 			      MIN_RESIZE_VALUE, MAX_RESIZE_VALUE);
 
 	if (ratio->horz <= MID_RESIZE_VALUE) {
 		upscaled_width = (output->width - 1) * ratio->horz
 			       + 32 * sph + 16;
-		input->width = (upscaled_width >> 8) + 7;
+		width = (upscaled_width >> 8) + 7;
 	} else {
 		upscaled_width = (output->width - 1) * ratio->horz
 			       + 64 * sph + 32;
-		input->width = (upscaled_width >> 8) + 7;
+		width = (upscaled_width >> 8) + 7;
 	}
+
+	/* Center the new crop rectangle. */
+	input->left += (input->width - width) / 2;
+	input->top += (input->height - height) / 2;
+	input->width = width;
+	input->height = height;
 }
 
 /*
@@ -1386,7 +1431,7 @@ static int resizer_enum_frame_size(struct v4l2_subdev *sd,
  * @sd    : pointer to v4l2 subdev structure
  * @fh    : V4L2 subdev file handle
  * @fmt   : pointer to v4l2 subdev format structure
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int resizer_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 			      struct v4l2_subdev_format *fmt)
diff --git a/drivers/media/video/omap3isp/ispstat.h b/drivers/media/video/omap3isp/ispstat.h
index 820950c9ef4..d86da94fa50 100644
--- a/drivers/media/video/omap3isp/ispstat.h
+++ b/drivers/media/video/omap3isp/ispstat.h
@@ -131,9 +131,9 @@ struct ispstat {
 struct ispstat_generic_config {
 	/*
 	 * Fields must be in the same order as in:
-	 *  - isph3a_aewb_config
-	 *  - isph3a_af_config
-	 *  - isphist_config
+	 *  - omap3isp_h3a_aewb_config
+	 *  - omap3isp_h3a_af_config
+	 *  - omap3isp_hist_config
 	 */
 	u32 buf_size;
 	u16 config_counter;
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index a0bb5db9cb8..9cd8f1aa567 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -47,29 +47,59 @@
 
 static struct isp_format_info formats[] = {
 	{ V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8,
-	  V4L2_MBUS_FMT_Y8_1X8, V4L2_PIX_FMT_GREY, 8, },
+	  V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8,
+	  V4L2_PIX_FMT_GREY, 8, },
+	{ V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y10_1X10,
+	  V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y8_1X8,
+	  V4L2_PIX_FMT_Y10, 10, },
+	{ V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y10_1X10,
+	  V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y8_1X8,
+	  V4L2_PIX_FMT_Y12, 12, },
+	{ V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8,
+	  V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8,
+	  V4L2_PIX_FMT_SBGGR8, 8, },
+	{ V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8,
+	  V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8,
+	  V4L2_PIX_FMT_SGBRG8, 8, },
+	{ V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8,
+	  V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8,
+	  V4L2_PIX_FMT_SGRBG8, 8, },
+	{ V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8,
+	  V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8,
+	  V4L2_PIX_FMT_SRGGB8, 8, },
 	{ V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8,
-	  V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10DPCM8, 8, },
+	  V4L2_MBUS_FMT_SGRBG10_1X10, 0,
+	  V4L2_PIX_FMT_SGRBG10DPCM8, 8, },
 	{ V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10,
-	  V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10, 10, },
+	  V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR8_1X8,
+	  V4L2_PIX_FMT_SBGGR10, 10, },
 	{ V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_1X10,
-	  V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10, 10, },
+	  V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG8_1X8,
+	  V4L2_PIX_FMT_SGBRG10, 10, },
 	{ V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_1X10,
-	  V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10, 10, },
+	  V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG8_1X8,
+	  V4L2_PIX_FMT_SGRBG10, 10, },
 	{ V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10,
-	  V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10, 10, },
+	  V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB8_1X8,
+	  V4L2_PIX_FMT_SRGGB10, 10, },
 	{ V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR10_1X10,
-	  V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12, 12, },
+	  V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR8_1X8,
+	  V4L2_PIX_FMT_SBGGR12, 12, },
 	{ V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG10_1X10,
-	  V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12, 12, },
+	  V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG8_1X8,
+	  V4L2_PIX_FMT_SGBRG12, 12, },
 	{ V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG10_1X10,
-	  V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12, 12, },
+	  V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG8_1X8,
+	  V4L2_PIX_FMT_SGRBG12, 12, },
 	{ V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB10_1X10,
-	  V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12, 12, },
+	  V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB8_1X8,
+	  V4L2_PIX_FMT_SRGGB12, 12, },
 	{ V4L2_MBUS_FMT_UYVY8_1X16, V4L2_MBUS_FMT_UYVY8_1X16,
-	  V4L2_MBUS_FMT_UYVY8_1X16, V4L2_PIX_FMT_UYVY, 16, },
+	  V4L2_MBUS_FMT_UYVY8_1X16, 0,
+	  V4L2_PIX_FMT_UYVY, 16, },
 	{ V4L2_MBUS_FMT_YUYV8_1X16, V4L2_MBUS_FMT_YUYV8_1X16,
-	  V4L2_MBUS_FMT_YUYV8_1X16, V4L2_PIX_FMT_YUYV, 16, },
+	  V4L2_MBUS_FMT_YUYV8_1X16, 0,
+	  V4L2_PIX_FMT_YUYV, 16, },
 };
 
 const struct isp_format_info *
@@ -86,6 +116,37 @@ omap3isp_video_format_info(enum v4l2_mbus_pixelcode code)
 }
 
 /*
+ * Decide whether desired output pixel code can be obtained with
+ * the lane shifter by shifting the input pixel code.
+ * @in: input pixelcode to shifter
+ * @out: output pixelcode from shifter
+ * @additional_shift: # of bits the sensor's LSB is offset from CAMEXT[0]
+ *
+ * return true if the combination is possible
+ * return false otherwise
+ */
+static bool isp_video_is_shiftable(enum v4l2_mbus_pixelcode in,
+		enum v4l2_mbus_pixelcode out,
+		unsigned int additional_shift)
+{
+	const struct isp_format_info *in_info, *out_info;
+
+	if (in == out)
+		return true;
+
+	in_info = omap3isp_video_format_info(in);
+	out_info = omap3isp_video_format_info(out);
+
+	if ((in_info->flavor == 0) || (out_info->flavor == 0))
+		return false;
+
+	if (in_info->flavor != out_info->flavor)
+		return false;
+
+	return in_info->bpp - out_info->bpp + additional_shift <= 6;
+}
+
+/*
  * isp_video_mbus_to_pix - Convert v4l2_mbus_framefmt to v4l2_pix_format
  * @video: ISP video instance
  * @mbus: v4l2_mbus_framefmt format (input)
@@ -235,6 +296,7 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
 		return -EPIPE;
 
 	while (1) {
+		unsigned int shifter_link;
 		/* Retrieve the sink format */
 		pad = &subdev->entity.pads[0];
 		if (!(pad->flags & MEDIA_PAD_FL_SINK))
@@ -263,6 +325,10 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
 				return -ENOSPC;
 		}
 
+		/* If sink pad is on CCDC, the link has the lane shifter
+		 * in the middle of it. */
+		shifter_link = subdev == &isp->isp_ccdc.subdev;
+
 		/* Retrieve the source format */
 		pad = media_entity_remote_source(pad);
 		if (pad == NULL ||
@@ -278,10 +344,24 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
 			return -EPIPE;
 
 		/* Check if the two ends match */
-		if (fmt_source.format.code != fmt_sink.format.code ||
-		    fmt_source.format.width != fmt_sink.format.width ||
+		if (fmt_source.format.width != fmt_sink.format.width ||
 		    fmt_source.format.height != fmt_sink.format.height)
 			return -EPIPE;
+
+		if (shifter_link) {
+			unsigned int parallel_shift = 0;
+			if (isp->isp_ccdc.input == CCDC_INPUT_PARALLEL) {
+				struct isp_parallel_platform_data *pdata =
+					&((struct isp_v4l2_subdevs_group *)
+					      subdev->host_priv)->bus.parallel;
+				parallel_shift = pdata->data_lane_shift * 2;
+			}
+			if (!isp_video_is_shiftable(fmt_source.format.code,
+						fmt_sink.format.code,
+						parallel_shift))
+				return -EPIPE;
+		} else if (fmt_source.format.code != fmt_sink.format.code)
+			return -EPIPE;
 	}
 
 	return 0;
@@ -494,12 +574,12 @@ static const struct isp_video_queue_operations isp_video_queue_ops = {
 /*
  * omap3isp_video_buffer_next - Complete the current buffer and return the next
  * @video: ISP video object
- * @error: Whether an error occured during capture
+ * @error: Whether an error occurred during capture
  *
  * Remove the current video buffer from the DMA queue and fill its timestamp,
  * field count and state fields before waking up its completion handler.
  *
- * The buffer state is set to VIDEOBUF_DONE if no error occured (@error is 0)
+ * The buffer state is set to VIDEOBUF_DONE if no error occurred (@error is 0)
  * or VIDEOBUF_ERROR otherwise (@error is non-zero).
  *
  * The DMA queue is expected to contain at least one buffer.
@@ -578,7 +658,7 @@ struct isp_buffer *omap3isp_video_buffer_next(struct isp_video *video,
 /*
  * omap3isp_video_resume - Perform resume operation on the buffers
  * @video: ISP video object
- * @continuous: Pipeline is in single shot mode if 0 or continous mode otherwise
+ * @continuous: Pipeline is in single shot mode if 0 or continuous mode otherwise
  *
  * This function is intended to be used on suspend/resume scenario. It
  * requests video queue layer to discard buffers marked as DONE if it's in
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index 524a1acd090..911bea64e78 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -49,6 +49,8 @@ struct v4l2_pix_format;
  *	bits. Identical to @code if the format is 10 bits wide or less.
  * @uncompressed: V4L2 media bus format code for the corresponding uncompressed
  *	format. Identical to @code if the format is not DPCM compressed.
+ * @flavor: V4L2 media bus format code for the same pixel layout but
+ *	shifted to be 8 bits per pixel. =0 if format is not shiftable.
  * @pixelformat: V4L2 pixel format FCC identifier
  * @bpp: Bits per pixel
  */
@@ -56,6 +58,7 @@ struct isp_format_info {
 	enum v4l2_mbus_pixelcode code;
 	enum v4l2_mbus_pixelcode truncated;
 	enum v4l2_mbus_pixelcode uncompressed;
+	enum v4l2_mbus_pixelcode flavor;
 	u32 pixelformat;
 	unsigned int bpp;
 };
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index fe8e3ebd9ce..456d9ad9ae5 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -1038,7 +1038,7 @@ static int ov6650_reset(struct i2c_client *client)
 	ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0);
 	if (ret)
 		dev_err(&client->dev,
-			"An error occured while entering soft reset!\n");
+			"An error occurred while entering soft reset!\n");
 
 	return ret;
 }
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 53d88a2ab92..5173ac449dd 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -273,7 +273,7 @@ static int ov9640_reset(struct i2c_client *client)
 	ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET);
 	if (ret)
 		dev_err(&client->dev,
-			"An error occured while entering soft reset!\n");
+			"An error occurred while entering soft reset!\n");
 
 	return ret;
 }
diff --git a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c b/drivers/media/video/pvrusb2/pvrusb2-eeprom.c
index aeed1c2945f..9515f3a68f8 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-eeprom.c
@@ -32,7 +32,7 @@
 
    Read and analyze data in the eeprom.  Use tveeprom to figure out
    the packet structure, since this is another Hauppauge device and
-   internally it has a family resemblence to ivtv-type devices
+   internally it has a family resemblance to ivtv-type devices
 
 */
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
index 51d3009ab57..d7753ae9ff4 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
@@ -75,7 +75,7 @@ enum pvr2_v4l_type {
  *  (but it might still on the bus).  In this state there's nothing we can
  *  do; it must be replugged in order to recover.
  *
- *  COLD - Device is in an unusuable state, needs microcontroller firmware.
+ *  COLD - Device is in an unusable state, needs microcontroller firmware.
  *
  *  WARM - We can communicate with the device and the proper
  *  microcontroller firmware is running, but other device initialization is
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 02686771740..c1ee09a043b 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -714,7 +714,7 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
  *
  * The DMA chaining is done with DMA running. This means a tiny temporal window
  * remains, where a buffer is queued on the chain, while the chain is already
- * stopped. This means the tailed buffer would never be transfered by DMA.
+ * stopped. This means the tailed buffer would never be transferred by DMA.
  * This function restarts the capture for this corner case, where :
  *  - DADR() == DADDR_STOP
  *  - a videobuffer is queued on the pcdev->capture list
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 95f8b4e11e4..d142b40ea64 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -527,7 +527,7 @@ static int fimc_cap_s_fmt_mplane(struct file *file, void *priv,
 	if (ret)
 		return ret;
 
-	if (vb2_is_streaming(&fimc->vid_cap.vbq) || fimc_capture_active(fimc))
+	if (vb2_is_busy(&fimc->vid_cap.vbq) || fimc_capture_active(fimc))
 		return -EBUSY;
 
 	frame = &ctx->d_frame;
@@ -539,8 +539,10 @@ static int fimc_cap_s_fmt_mplane(struct file *file, void *priv,
 		return -EINVAL;
 	}
 
-	for (i = 0; i < frame->fmt->colplanes; i++)
-		frame->payload[i] = pix->plane_fmt[i].bytesperline * pix->height;
+	for (i = 0; i < frame->fmt->colplanes; i++) {
+		frame->payload[i] =
+			(pix->width * pix->height * frame->fmt->depth[i]) >> 3;
+	}
 
 	/* Output DMA frame pixel size and offsets. */
 	frame->f_width = pix->plane_fmt[0].bytesperline * 8
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 6c919b38a3d..dc91a8511af 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -361,10 +361,20 @@ static void fimc_capture_irq_handler(struct fimc_dev *fimc)
 {
 	struct fimc_vid_cap *cap = &fimc->vid_cap;
 	struct fimc_vid_buffer *v_buf;
+	struct timeval *tv;
+	struct timespec ts;
 
 	if (!list_empty(&cap->active_buf_q) &&
 	    test_bit(ST_CAPT_RUN, &fimc->state)) {
+		ktime_get_real_ts(&ts);
+
 		v_buf = active_queue_pop(cap);
+
+		tv = &v_buf->vb.v4l2_buf.timestamp;
+		tv->tv_sec = ts.tv_sec;
+		tv->tv_usec = ts.tv_nsec / NSEC_PER_USEC;
+		v_buf->vb.v4l2_buf.sequence = cap->frame_count++;
+
 		vb2_buffer_done(&v_buf->vb, VB2_BUF_STATE_DONE);
 	}
 
@@ -758,7 +768,7 @@ static void fimc_unlock(struct vb2_queue *vq)
 	mutex_unlock(&ctx->fimc_dev->lock);
 }
 
-struct vb2_ops fimc_qops = {
+static struct vb2_ops fimc_qops = {
 	.queue_setup	 = fimc_queue_setup,
 	.buf_prepare	 = fimc_buf_prepare,
 	.buf_queue	 = fimc_buf_queue,
@@ -927,23 +937,23 @@ int fimc_vidioc_try_fmt_mplane(struct file *file, void *priv,
 	pix->num_planes = fmt->memplanes;
 	pix->colorspace	= V4L2_COLORSPACE_JPEG;
 
-	for (i = 0; i < pix->num_planes; ++i) {
-		int bpl = pix->plane_fmt[i].bytesperline;
 
-		dbg("[%d] bpl: %d, depth: %d, w: %d, h: %d",
-		    i, bpl, fmt->depth[i], pix->width, pix->height);
+	for (i = 0; i < pix->num_planes; ++i) {
+		u32 bpl = pix->plane_fmt[i].bytesperline;
+		u32 *sizeimage = &pix->plane_fmt[i].sizeimage;
 
-		if (!bpl || (bpl * 8 / fmt->depth[i]) > pix->width)
-			bpl = (pix->width * fmt->depth[0]) >> 3;
+		if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width))
+			bpl = pix->width; /* Planar */
 
-		if (!pix->plane_fmt[i].sizeimage)
-			pix->plane_fmt[i].sizeimage = pix->height * bpl;
+		if (fmt->colplanes == 1 && /* Packed */
+		    (bpl == 0 || ((bpl * 8) / fmt->depth[i]) < pix->width))
+			bpl = (pix->width * fmt->depth[0]) / 8;
 
-		pix->plane_fmt[i].bytesperline = bpl;
+		if (i == 0) /* Same bytesperline for each plane. */
+			mod_x = bpl;
 
-		dbg("[%d]: bpl: %d, sizeimage: %d",
-		    i, pix->plane_fmt[i].bytesperline,
-		    pix->plane_fmt[i].sizeimage);
+		pix->plane_fmt[i].bytesperline = mod_x;
+		*sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8;
 	}
 
 	return 0;
@@ -965,7 +975,7 @@ static int fimc_m2m_s_fmt_mplane(struct file *file, void *priv,
 
 	vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
 
-	if (vb2_is_streaming(vq)) {
+	if (vb2_is_busy(vq)) {
 		v4l2_err(&fimc->m2m.v4l2_dev, "queue (%d) busy\n", f->type);
 		return -EBUSY;
 	}
@@ -985,8 +995,10 @@ static int fimc_m2m_s_fmt_mplane(struct file *file, void *priv,
 	if (!frame->fmt)
 		return -EINVAL;
 
-	for (i = 0; i < frame->fmt->colplanes; i++)
-		frame->payload[i] = pix->plane_fmt[i].bytesperline * pix->height;
+	for (i = 0; i < frame->fmt->colplanes; i++) {
+		frame->payload[i] =
+			(pix->width * pix->height * frame->fmt->depth[i]) / 8;
+	}
 
 	frame->f_width	= pix->plane_fmt[0].bytesperline * 8 /
 		frame->fmt->depth[0];
@@ -1750,7 +1762,7 @@ static int __devexit fimc_remove(struct platform_device *pdev)
 }
 
 /* Image pixel limits, similar across several FIMC HW revisions. */
-static struct fimc_pix_limit s5p_pix_limit[3] = {
+static struct fimc_pix_limit s5p_pix_limit[4] = {
 	[0] = {
 		.scaler_en_w	= 3264,
 		.scaler_dis_w	= 8192,
@@ -1775,6 +1787,14 @@ static struct fimc_pix_limit s5p_pix_limit[3] = {
 		.out_rot_en_w	= 1280,
 		.out_rot_dis_w	= 1920,
 	},
+	[3] = {
+		.scaler_en_w	= 1920,
+		.scaler_dis_w	= 8192,
+		.in_rot_en_h	= 1366,
+		.in_rot_dis_w	= 8192,
+		.out_rot_en_w	= 1366,
+		.out_rot_dis_w	= 1920,
+	},
 };
 
 static struct samsung_fimc_variant fimc0_variant_s5p = {
@@ -1827,7 +1847,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
 	.pix_limit	 = &s5p_pix_limit[2],
 };
 
-static struct samsung_fimc_variant fimc0_variant_s5pv310 = {
+static struct samsung_fimc_variant fimc0_variant_exynos4 = {
 	.pix_hoff	 = 1,
 	.has_inp_rot	 = 1,
 	.has_out_rot	 = 1,
@@ -1840,7 +1860,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv310 = {
 	.pix_limit	 = &s5p_pix_limit[1],
 };
 
-static struct samsung_fimc_variant fimc2_variant_s5pv310 = {
+static struct samsung_fimc_variant fimc2_variant_exynos4 = {
 	.pix_hoff	 = 1,
 	.has_cistatus2	 = 1,
 	.has_mainscaler_ext = 1,
@@ -1848,7 +1868,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv310 = {
 	.min_out_pixsize = 16,
 	.hor_offs_align	 = 1,
 	.out_buf_count	 = 32,
-	.pix_limit	 = &s5p_pix_limit[2],
+	.pix_limit	 = &s5p_pix_limit[3],
 };
 
 /* S5PC100 */
@@ -1874,12 +1894,12 @@ static struct samsung_fimc_driverdata fimc_drvdata_s5pv210 = {
 };
 
 /* S5PV310, S5PC210 */
-static struct samsung_fimc_driverdata fimc_drvdata_s5pv310 = {
+static struct samsung_fimc_driverdata fimc_drvdata_exynos4 = {
 	.variant = {
-		[0] = &fimc0_variant_s5pv310,
-		[1] = &fimc0_variant_s5pv310,
-		[2] = &fimc0_variant_s5pv310,
-		[3] = &fimc2_variant_s5pv310,
+		[0] = &fimc0_variant_exynos4,
+		[1] = &fimc0_variant_exynos4,
+		[2] = &fimc0_variant_exynos4,
+		[3] = &fimc2_variant_exynos4,
 	},
 	.num_entities = 4,
 	.lclk_frequency = 166000000UL,
@@ -1893,8 +1913,8 @@ static struct platform_device_id fimc_driver_ids[] = {
 		.name		= "s5pv210-fimc",
 		.driver_data	= (unsigned long)&fimc_drvdata_s5pv210,
 	}, {
-		.name		= "s5pv310-fimc",
-		.driver_data	= (unsigned long)&fimc_drvdata_s5pv310,
+		.name		= "exynos4-fimc",
+		.driver_data	= (unsigned long)&fimc_drvdata_exynos4,
 	},
 	{},
 };
diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c
index 4d929a39452..4893b2d91d8 100644
--- a/drivers/media/video/s5p-fimc/fimc-reg.c
+++ b/drivers/media/video/s5p-fimc/fimc-reg.c
@@ -356,7 +356,7 @@ void fimc_hw_en_capture(struct fimc_ctx *ctx)
 		/* one shot mode */
 		cfg |= S5P_CIIMGCPT_CPT_FREN_ENABLE | S5P_CIIMGCPT_IMGCPTEN;
 	} else {
-		/* Continous frame capture mode (freerun). */
+		/* Continuous frame capture mode (freerun). */
 		cfg &= ~(S5P_CIIMGCPT_CPT_FREN_ENABLE |
 			 S5P_CIIMGCPT_CPT_FRMOD_CNT);
 		cfg |= S5P_CIIMGCPT_IMGCPTEN;
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 61c6007c8ea..50f1be05ebd 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -7460,7 +7460,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 				dev->tuner_type = TUNER_PHILIPS_FM1216ME_MK3;
 				break;
 			default:
-				printk(KERN_ERR "%s Cant determine tuner type %x from EEPROM\n", dev->name, tuner_t);
+				printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t);
 			}
 		} else if ((data[1] != 0) && (data[1] != 0xff)) {
 			/* new config structure */
@@ -7480,7 +7480,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 					printk(KERN_INFO "%s Board has DVB-T\n", dev->name);
 				break;
 			default:
-				printk(KERN_ERR "%s Cant determine tuner type %x from EEPROM\n", dev->name, tuner_t);
+				printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t);
 			}
 		} else {
 			printk(KERN_ERR "%s unexpected config structure\n", dev->name);
diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index 6a4c217ed3a..62fac7f9d04 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -257,7 +257,7 @@ out:
 }
 
 /* Wait for a signal event, without holding a mutex. Either return TIMEOUT if
- * the event never occured, or SAA_OK if it was signaled during the wait.
+ * the event never occurred, or SAA_OK if it was signaled during the wait.
  */
 int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
 {
diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c
index b369300cce0..a266bf0169e 100644
--- a/drivers/media/video/saa7164/saa7164-fw.c
+++ b/drivers/media/video/saa7164/saa7164-fw.c
@@ -444,7 +444,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 		printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved);
 		printk(KERN_INFO " .Version = 0x%x\n", hdr->version);
 
-		/* Retreive bootloader if reqd */
+		/* Retrieve bootloader if reqd */
 		if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0))
 			/* Second bootloader in the firmware file */
 			filesize = hdr->reserved * 16;
diff --git a/drivers/media/video/saa7164/saa7164-types.h b/drivers/media/video/saa7164/saa7164-types.h
index df1d2997fa6..1d2140a3eb3 100644
--- a/drivers/media/video/saa7164/saa7164-types.h
+++ b/drivers/media/video/saa7164/saa7164-types.h
@@ -412,7 +412,7 @@ struct tmComResVBIFormatDescrHeader {
 	u8	StartLine; /* NTSC Start = 10 */
 	u8	EndLine; /* NTSC = 21 */
 	u8	FieldRate; /* 60 for NTSC */
-	u8	bNumLines; /* Unsed - scheduled for removal */
+	u8	bNumLines; /* Unused - scheduled for removal */
 } __attribute__((packed));
 
 struct tmComResProbeCommit {
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 3fe54bf4114..134e86bf6d9 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -922,7 +922,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int
 			/* Try 2560x1920, 1280x960, 640x480, 320x240 */
 			mf.width	= 2560 >> shift;
 			mf.height	= 1920 >> shift;
-			ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video,
+			ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
 							 s_mbus_fmt, &mf);
 			if (ret < 0)
 				return ret;
@@ -1224,7 +1224,7 @@ static int client_s_fmt(struct soc_camera_device *icd,
 	struct v4l2_cropcap cap;
 	int ret;
 
-	ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video,
+	ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
 					 s_mbus_fmt, mf);
 	if (ret < 0)
 		return ret;
@@ -1254,7 +1254,7 @@ static int client_s_fmt(struct soc_camera_device *icd,
 		tmp_h = min(2 * tmp_h, max_height);
 		mf->width = tmp_w;
 		mf->height = tmp_h;
-		ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video,
+		ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
 						 s_mbus_fmt, mf);
 		dev_geo(dev, "Camera scaled to %ux%u\n",
 			mf->width, mf->height);
@@ -1658,7 +1658,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	mf.code		= xlate->code;
 	mf.colorspace	= pix->colorspace;
 
-	ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, try_mbus_fmt, &mf);
+	ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, try_mbus_fmt, &mf);
 	if (ret < 0)
 		return ret;
 
@@ -1682,7 +1682,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 			 */
 			mf.width = 2560;
 			mf.height = 1920;
-			ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video,
+			ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
 							 try_mbus_fmt, &mf);
 			if (ret < 0) {
 				/* Shouldn't actually happen... */
diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c
index dd1b81b1442..98b87481fa9 100644
--- a/drivers/media/video/sh_mobile_csi2.c
+++ b/drivers/media/video/sh_mobile_csi2.c
@@ -38,6 +38,8 @@ struct sh_csi2 {
 	void __iomem			*base;
 	struct platform_device		*pdev;
 	struct sh_csi2_client_config	*client;
+	unsigned long (*query_bus_param)(struct soc_camera_device *);
+	int (*set_bus_param)(struct soc_camera_device *, unsigned long);
 };
 
 static int sh_csi2_try_fmt(struct v4l2_subdev *sd,
@@ -208,6 +210,7 @@ static int sh_csi2_notify(struct notifier_block *nb,
 	case BUS_NOTIFY_BOUND_DRIVER:
 		snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s",
 			 dev_name(v4l2_dev->dev), ".mipi-csi");
+		priv->subdev.grp_id = (long)icd;
 		ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev);
 		dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret);
 		if (ret < 0)
@@ -215,6 +218,8 @@ static int sh_csi2_notify(struct notifier_block *nb,
 
 		priv->client = pdata->clients + i;
 
+		priv->set_bus_param		= icd->ops->set_bus_param;
+		priv->query_bus_param		= icd->ops->query_bus_param;
 		icd->ops->set_bus_param		= sh_csi2_set_bus_param;
 		icd->ops->query_bus_param	= sh_csi2_query_bus_param;
 
@@ -226,8 +231,10 @@ static int sh_csi2_notify(struct notifier_block *nb,
 		priv->client = NULL;
 
 		/* Driver is about to be unbound */
-		icd->ops->set_bus_param		= NULL;
-		icd->ops->query_bus_param	= NULL;
+		icd->ops->set_bus_param		= priv->set_bus_param;
+		icd->ops->query_bus_param	= priv->query_bus_param;
+		priv->set_bus_param		= NULL;
+		priv->query_bus_param		= NULL;
 
 		v4l2_device_unregister_subdev(&priv->subdev);
 
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index ce56a1cdbf0..0e07c493e6f 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -1810,7 +1810,7 @@ static int sn9c102_open(struct file *filp)
 		/*
 		   We will not release the "open_mutex" lock, so that only one
 		   process can be in the wait queue below. This way the process
-		   will be sleeping while holding the lock, without loosing its
+		   will be sleeping while holding the lock, without losing its
 		   priority after any wake_up().
 		*/
 		err = wait_event_interruptible_exclusive(cam->wait_open,
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 7f38549715b..3679970dba2 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -180,7 +180,7 @@ struct sn9c102_sensor {
 	   It should be used to initialize the sensor only, but may also
 	   configure part of the SN9C1XX chip if necessary. You don't need to
 	   setup picture settings like brightness, contrast, etc.. here, if
-	   the corrisponding controls are implemented (see below), since
+	   the corresponding controls are implemented (see below), since
 	   they are adjusted in the core driver by calling the set_ctrl()
 	   method after init(), where the arguments are the default values
 	   specified in the v4l2_queryctrl list of supported controls;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 46284489e4e..ddb4c091ded 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -136,11 +136,50 @@ unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
 }
 EXPORT_SYMBOL(soc_camera_apply_sensor_flags);
 
+#define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \
+	((x) >> 24) & 0xff
+
+static int soc_camera_try_fmt(struct soc_camera_device *icd,
+			      struct v4l2_format *f)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	int ret;
+
+	dev_dbg(&icd->dev, "TRY_FMT(%c%c%c%c, %ux%u)\n",
+		pixfmtstr(pix->pixelformat), pix->width, pix->height);
+
+	pix->bytesperline = 0;
+	pix->sizeimage = 0;
+
+	ret = ici->ops->try_fmt(icd, f);
+	if (ret < 0)
+		return ret;
+
+	if (!pix->sizeimage) {
+		if (!pix->bytesperline) {
+			const struct soc_camera_format_xlate *xlate;
+
+			xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+			if (!xlate)
+				return -EINVAL;
+
+			ret = soc_mbus_bytes_per_line(pix->width,
+						      xlate->host_fmt);
+			if (ret > 0)
+				pix->bytesperline = ret;
+		}
+		if (pix->bytesperline)
+			pix->sizeimage = pix->bytesperline * pix->height;
+	}
+
+	return 0;
+}
+
 static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv,
 				      struct v4l2_format *f)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -149,7 +188,7 @@ static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv,
 		return -EINVAL;
 
 	/* limit format to hardware capabilities */
-	return ici->ops->try_fmt(icd, f);
+	return soc_camera_try_fmt(icd, f);
 }
 
 static int soc_camera_enum_input(struct file *file, void *priv,
@@ -362,9 +401,6 @@ static void soc_camera_free_user_formats(struct soc_camera_device *icd)
 	icd->user_formats = NULL;
 }
 
-#define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \
-	((x) >> 24) & 0xff
-
 /* Called with .vb_lock held, or from the first open(2), see comment there */
 static int soc_camera_set_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
@@ -377,7 +413,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd,
 		pixfmtstr(pix->pixelformat), pix->width, pix->height);
 
 	/* We always call try_fmt() before set_fmt() or set_crop() */
-	ret = ici->ops->try_fmt(icd, f);
+	ret = soc_camera_try_fmt(icd, f);
 	if (ret < 0)
 		return ret;
 
@@ -996,10 +1032,11 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd)
 {
 	struct i2c_client *client =
 		to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_adapter *adap = client->adapter;
 	dev_set_drvdata(&icd->dev, NULL);
 	v4l2_device_unregister_subdev(i2c_get_clientdata(client));
 	i2c_unregister_device(client);
-	i2c_put_adapter(client->adapter);
+	i2c_put_adapter(adap);
 }
 #else
 #define soc_camera_init_i2c(icd, icl)	(-ENODEV)
@@ -1071,6 +1108,9 @@ static int soc_camera_probe(struct device *dev)
 		}
 	}
 
+	sd = soc_camera_to_subdev(icd);
+	sd->grp_id = (long)icd;
+
 	/* At this point client .probe() should have run already */
 	ret = soc_camera_init_user_formats(icd);
 	if (ret < 0)
@@ -1092,7 +1132,6 @@ static int soc_camera_probe(struct device *dev)
 		goto evidstart;
 
 	/* Try to improve our guess of a reasonable window format */
-	sd = soc_camera_to_subdev(icd);
 	if (!v4l2_subdev_call(sd, video, g_mbus_fmt, &mf)) {
 		icd->user_width		= mf.width;
 		icd->user_height	= mf.height;
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index 54681a53582..b6ee1bd342d 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -493,7 +493,7 @@ static int ioctl_g_ctrl(struct v4l2_int_device *s,
 	int val, r;
 	struct vcontrol *lvc;
 
-	/* exposure time is special, spread accross 2 registers */
+	/* exposure time is special, spread across 2 registers */
 	if (vc->id == V4L2_CID_EXPOSURE) {
 		int val_lower, val_upper;
 
@@ -538,7 +538,7 @@ static int ioctl_s_ctrl(struct v4l2_int_device *s,
 	struct vcontrol *lvc;
 	int val = vc->value;
 
-	/* exposure time is special, spread accross 2 registers */
+	/* exposure time is special, spread across 2 registers */
 	if (vc->id == V4L2_CID_EXPOSURE) {
 		int val_lower, val_upper;
 		val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L);
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
index 5d4cf3b3d43..22fa8202d5c 100644
--- a/drivers/media/video/tda9840.c
+++ b/drivers/media/video/tda9840.c
@@ -171,7 +171,7 @@ static int tda9840_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tda9840_ops);
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index 19621ed523e..827425c5b86 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -152,7 +152,7 @@ static int tea6415c_probe(struct i2c_client *client,
 
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tea6415c_ops);
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 5ea840401f2..f350b6c2450 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -125,7 +125,7 @@ static int tea6420_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tea6420_ops);
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index a25e2b5e194..c46a3bb9585 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -1058,11 +1058,11 @@ static int tda9874a_initialize(struct CHIPSTATE *chip)
 #define TDA9875_MVR         0x1b  /* Main volume droite */
 #define TDA9875_MBA         0x1d  /* Main Basse */
 #define TDA9875_MTR         0x1e  /* Main treble */
-#define TDA9875_ACS         0x1f  /* Auxilary channel select (FM) 0b0000000*/
-#define TDA9875_AVL         0x20  /* Auxilary volume gauche */
-#define TDA9875_AVR         0x21  /* Auxilary volume droite */
-#define TDA9875_ABA         0x22  /* Auxilary Basse */
-#define TDA9875_ATR         0x23  /* Auxilary treble */
+#define TDA9875_ACS         0x1f  /* Auxiliary channel select (FM) 0b0000000*/
+#define TDA9875_AVL         0x20  /* Auxiliary volume gauche */
+#define TDA9875_AVR         0x21  /* Auxiliary volume droite */
+#define TDA9875_ABA         0x22  /* Auxiliary Basse */
+#define TDA9875_ATR         0x23  /* Auxiliary treble */
 
 #define TDA9875_MSR         0x02  /* Monitor select register */
 #define TDA9875_C1MSB       0x03  /* Carrier 1 (FM) frequency register MSB */
diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c
index f8138c75be8..1aab96a8820 100644
--- a/drivers/media/video/upd64031a.c
+++ b/drivers/media/video/upd64031a.c
@@ -230,7 +230,7 @@ static int upd64031a_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;
diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c
index 28e0e6b6ca8..9bbe61700fd 100644
--- a/drivers/media/video/upd64083.c
+++ b/drivers/media/video/upd64083.c
@@ -202,7 +202,7 @@ static int upd64083_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct upd64083_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 545c0294813..fc766b9f24c 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -394,11 +394,11 @@ int uvc_commit_video(struct uvc_streaming *stream,
  *
  * uvc_video_decode_end is called with header data at the end of a bulk or
  * isochronous payload. It performs any additional header data processing and
- * returns 0 or a negative error code if an error occured. As header data have
+ * returns 0 or a negative error code if an error occurred. As header data have
  * already been processed by uvc_video_decode_start, this functions isn't
  * required to perform sanity checks a second time.
  *
- * For isochronous transfers where a payload is always transfered in a single
+ * For isochronous transfers where a payload is always transferred in a single
  * URB, the three functions will be called in a row.
  *
  * To let the decoder process header data and update its internal state even
@@ -658,7 +658,7 @@ static void uvc_video_decode_bulk(struct urb *urb, struct uvc_streaming *stream,
 							    buf);
 		} while (ret == -EAGAIN);
 
-		/* If an error occured skip the rest of the payload. */
+		/* If an error occurred skip the rest of the payload. */
 		if (ret < 0 || buf == NULL) {
 			stream->bulk.skip_payload = 1;
 		} else {
@@ -821,7 +821,7 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream,
 		return stream->urb_size / psize;
 
 	/* Compute the number of packets. Bulk endpoints might transfer UVC
-	 * payloads accross multiple URBs.
+	 * payloads across multiple URBs.
 	 */
 	npackets = DIV_ROUND_UP(size, psize);
 	if (npackets > UVC_MAX_PACKETS)
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 498e6742579..6dc7196296b 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -389,7 +389,8 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 	video_get(vdev);
 	mutex_unlock(&videodev_lock);
 #if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) {
+	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
+	    vdev->vfl_type != VFL_TYPE_SUBDEV) {
 		entity = media_entity_get(&vdev->entity);
 		if (!entity) {
 			ret = -EBUSY;
@@ -415,7 +416,8 @@ err:
 	/* decrease the refcount in case of an error */
 	if (ret) {
 #if defined(CONFIG_MEDIA_CONTROLLER)
-		if (vdev->v4l2_dev && vdev->v4l2_dev->mdev)
+		if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
+		    vdev->vfl_type != VFL_TYPE_SUBDEV)
 			media_entity_put(entity);
 #endif
 		video_put(vdev);
@@ -437,7 +439,8 @@ static int v4l2_release(struct inode *inode, struct file *filp)
 			mutex_unlock(vdev->lock);
 	}
 #if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev)
+	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
+	    vdev->vfl_type != VFL_TYPE_SUBDEV)
 		media_entity_put(&vdev->entity);
 #endif
 	/* decrease the refcount unconditionally since the release()
@@ -686,7 +689,8 @@ int __video_register_device(struct video_device *vdev, int type, int nr,
 
 #if defined(CONFIG_MEDIA_CONTROLLER)
 	/* Part 5: Register the entity. */
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) {
+	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
+	    vdev->vfl_type != VFL_TYPE_SUBDEV) {
 		vdev->entity.type = MEDIA_ENT_T_DEVNODE_V4L;
 		vdev->entity.name = vdev->name;
 		vdev->entity.v4l.major = VIDEO_MAJOR;
@@ -733,7 +737,8 @@ void video_unregister_device(struct video_device *vdev)
 		return;
 
 #if defined(CONFIG_MEDIA_CONTROLLER)
-	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev)
+	if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
+	    vdev->vfl_type != VFL_TYPE_SUBDEV)
 		media_device_unregister_entity(&vdev->entity);
 #endif
 
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 5aeaf876ba9..4aae501f02d 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -155,8 +155,10 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
 	sd->v4l2_dev = v4l2_dev;
 	if (sd->internal_ops && sd->internal_ops->registered) {
 		err = sd->internal_ops->registered(sd);
-		if (err)
+		if (err) {
+			module_put(sd->owner);
 			return err;
+		}
 	}
 
 	/* This just returns 0 if either of the two args is NULL */
@@ -164,6 +166,7 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
 	if (err) {
 		if (sd->internal_ops && sd->internal_ops->unregistered)
 			sd->internal_ops->unregistered(sd);
+		module_put(sd->owner);
 		return err;
 	}
 
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index a01ed39e6c1..506edcc2dde 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -48,7 +48,7 @@
 			printk(KERN_CONT "%s: " fmt, vfd->name, ## arg);\
 		} while (0)
 
-/* Zero out the end of the struct pointed to by p.  Everthing after, but
+/* Zero out the end of the struct pointed to by p.  Everything after, but
  * not including, the specified field is cleared. */
 #define CLEAR_AFTER_FIELD(p, field) \
 	memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index 0b806449067..812729ebf09 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -155,25 +155,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 	switch (cmd) {
 	case VIDIOC_QUERYCTRL:
-		return v4l2_subdev_queryctrl(sd, arg);
+		return v4l2_queryctrl(sd->ctrl_handler, arg);
 
 	case VIDIOC_QUERYMENU:
-		return v4l2_subdev_querymenu(sd, arg);
+		return v4l2_querymenu(sd->ctrl_handler, arg);
 
 	case VIDIOC_G_CTRL:
-		return v4l2_subdev_g_ctrl(sd, arg);
+		return v4l2_g_ctrl(sd->ctrl_handler, arg);
 
 	case VIDIOC_S_CTRL:
-		return v4l2_subdev_s_ctrl(sd, arg);
+		return v4l2_s_ctrl(sd->ctrl_handler, arg);
 
 	case VIDIOC_G_EXT_CTRLS:
-		return v4l2_subdev_g_ext_ctrls(sd, arg);
+		return v4l2_g_ext_ctrls(sd->ctrl_handler, arg);
 
 	case VIDIOC_S_EXT_CTRLS:
-		return v4l2_subdev_s_ext_ctrls(sd, arg);
+		return v4l2_s_ext_ctrls(sd->ctrl_handler, arg);
 
 	case VIDIOC_TRY_EXT_CTRLS:
-		return v4l2_subdev_try_ext_ctrls(sd, arg);
+		return v4l2_try_ext_ctrls(sd->ctrl_handler, arg);
 
 	case VIDIOC_DQEVENT:
 		if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS))
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index c4742fc1552..c9691115f2d 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -300,7 +300,7 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 	retval = remap_pfn_range(vma, vma->vm_start,
-				 PFN_DOWN(virt_to_phys(mem->vaddr)),
+				 mem->dma_handle >> PAGE_SHIFT,
 				 size, vma->vm_page_prot);
 	if (retval) {
 		dev_err(q->dev, "mmap: remap failed with error %d. ", retval);
diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 6698c77e0f6..6ba1461d51e 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -37,6 +37,9 @@ module_param(debug, int, 0644);
 #define call_qop(q, op, args...)					\
 	(((q)->ops->op) ? ((q)->ops->op(args)) : 0)
 
+#define V4L2_BUFFER_STATE_FLAGS	(V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | \
+				 V4L2_BUF_FLAG_DONE | V4L2_BUF_FLAG_ERROR)
+
 /**
  * __vb2_buf_mem_alloc() - allocate video memory for the given buffer
  */
@@ -51,7 +54,7 @@ static int __vb2_buf_mem_alloc(struct vb2_buffer *vb,
 	for (plane = 0; plane < vb->num_planes; ++plane) {
 		mem_priv = call_memop(q, plane, alloc, q->alloc_ctx[plane],
 					plane_sizes[plane]);
-		if (!mem_priv)
+		if (IS_ERR_OR_NULL(mem_priv))
 			goto free;
 
 		/* Associate allocator private data with this plane */
@@ -284,7 +287,7 @@ static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b)
 	struct vb2_queue *q = vb->vb2_queue;
 	int ret = 0;
 
-	/* Copy back data such as timestamp, input, etc. */
+	/* Copy back data such as timestamp, flags, input, etc. */
 	memcpy(b, &vb->v4l2_buf, offsetof(struct v4l2_buffer, m));
 	b->input = vb->v4l2_buf.input;
 	b->reserved = vb->v4l2_buf.reserved;
@@ -313,7 +316,10 @@ static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b)
 			b->m.userptr = vb->v4l2_planes[0].m.userptr;
 	}
 
-	b->flags = 0;
+	/*
+	 * Clear any buffer state related flags.
+	 */
+	b->flags &= ~V4L2_BUFFER_STATE_FLAGS;
 
 	switch (vb->state) {
 	case VB2_BUF_STATE_QUEUED:
@@ -519,6 +525,7 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
 	num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME);
 	memset(plane_sizes, 0, sizeof(plane_sizes));
 	memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx));
+	q->memory = req->memory;
 
 	/*
 	 * Ask the driver how many buffers and planes per buffer it requires.
@@ -560,8 +567,6 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
 		ret = num_buffers;
 	}
 
-	q->memory = req->memory;
-
 	/*
 	 * Return the number of successfully allocated buffers
 	 * to the userspace.
@@ -715,6 +720,8 @@ static int __fill_vb2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b,
 
 	vb->v4l2_buf.field = b->field;
 	vb->v4l2_buf.timestamp = b->timestamp;
+	vb->v4l2_buf.input = b->input;
+	vb->v4l2_buf.flags = b->flags & ~V4L2_BUFFER_STATE_FLAGS;
 
 	return 0;
 }
diff --git a/drivers/media/video/videobuf2-dma-contig.c b/drivers/media/video/videobuf2-dma-contig.c
index 58205d59613..a790a5f8c06 100644
--- a/drivers/media/video/videobuf2-dma-contig.c
+++ b/drivers/media/video/videobuf2-dma-contig.c
@@ -46,7 +46,7 @@ static void *vb2_dma_contig_alloc(void *alloc_ctx, unsigned long size)
 					GFP_KERNEL);
 	if (!buf->vaddr) {
 		dev_err(conf->dev, "dma_alloc_coherent of size %ld failed\n",
-			buf->size);
+			size);
 		kfree(buf);
 		return ERR_PTR(-ENOMEM);
 	}
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 75301d10a83..ca372eb911d 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -354,7 +354,7 @@ static int vpx3220_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 
 	/* Here we back up the input selection because it gets
 	   overwritten when we fill the registers with the
-	   choosen video norm */
+	   chosen video norm */
 	temp_input = vpx3220_fp_read(sd, 0xf2);
 
 	v4l2_dbg(1, debug, sd, "s_std %llx\n", (unsigned long long)std);
diff --git a/drivers/media/video/zoran/videocodec.h b/drivers/media/video/zoran/videocodec.h
index b654bfff874..def55585ad2 100644
--- a/drivers/media/video/zoran/videocodec.h
+++ b/drivers/media/video/zoran/videocodec.h
@@ -57,7 +57,7 @@
    therfor they may not be initialized.
 
    The other functions are just for convenience, as they are for sure used by
-   most/all of the codecs. The last ones may be ommited, too.
+   most/all of the codecs. The last ones may be omitted, too.
 
    See the structure declaration below for more information and which data has
    to be set up for the master and the slave.
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 4bb368e6fd4..f3f64001492 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -259,7 +259,7 @@ struct card_info {
 	struct vfe_polarity vfe_pol;
 	u8 gpio_pol[ZR_GPIO_MAX];
 
-	/* is the /GWS line conected? */
+	/* is the /GWS line connected? */
 	u8 gws_not_connected;
 
 	/* avs6eyes mux setting */
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 7c3921de958..2771d818406 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1254,7 +1254,7 @@ static int setup_overlay(struct zoran_fh *fh, int on)
 {
 	struct zoran *zr = fh->zr;
 
-	/* If there is nothing to do, return immediatly */
+	/* If there is nothing to do, return immediately */
 	if ((on && fh->overlay_active != ZORAN_FREE) ||
 	    (!on && fh->overlay_active == ZORAN_FREE))
 		return 0;
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 57b42bfc7d2..4a1909a32b6 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -973,7 +973,7 @@ try_again:
 }
 
 /* Memory allocated for attributes by this function should be freed by
- * mspro_block_data_clear, no matter if the initialization process succeded
+ * mspro_block_data_clear, no matter if the initialization process succeeded
  * or failed.
  */
 static int mspro_block_read_attributes(struct memstick_dev *card)
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c
index 700d420a59a..668f5c6a039 100644
--- a/drivers/memstick/host/r592.c
+++ b/drivers/memstick/host/r592.c
@@ -796,7 +796,7 @@ static int r592_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (memstick_add_host(host))
 		goto error7;
 
-	message("driver succesfully loaded");
+	message("driver successfully loaded");
 	return 0;
 error7:
 	free_irq(dev->irq, dev);
diff --git a/drivers/memstick/host/r592.h b/drivers/memstick/host/r592.h
index eee264e6028..c5726c1e883 100644
--- a/drivers/memstick/host/r592.h
+++ b/drivers/memstick/host/r592.h
@@ -43,12 +43,12 @@
 
 							/* Error detection via CRC */
 #define R592_STATUS_SEND_ERR		(1 << 24)	/* Send failed */
-#define R592_STATUS_RECV_ERR		(1 << 25)	/* Recieve failed */
+#define R592_STATUS_RECV_ERR		(1 << 25)	/* Receive failed */
 
 							/* Card state */
-#define R592_STATUS_RDY			(1 << 28)	/* RDY signal recieved */
+#define R592_STATUS_RDY			(1 << 28)	/* RDY signal received */
 #define R592_STATUS_CED			(1 << 29)	/* INT: Command done (serial mode)*/
-#define R592_STATUS_SFIFO_INPUT		(1 << 30)	/* Small fifo recieved data*/
+#define R592_STATUS_SFIFO_INPUT		(1 << 30)	/* Small fifo received data*/
 
 #define R592_SFIFO_SIZE			32		/* total size of small fifo is 32 bytes */
 #define R592_SFIFO_PACKET		8		/* packet size of small fifo */
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
index face6e7acc7..03be8b21770 100644
--- a/drivers/message/fusion/lsi/mpi_log_fc.h
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -38,8 +38,8 @@ typedef enum _MpiIocLogInfoFc
 {
     MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
     MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primitive */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primitive */
     MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
     MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
     MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 8b04810df46..f62960b5d52 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -56,9 +56,9 @@
 #define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE         (0x0003E000) /* Tried to upload from flash, but there is none */
 #define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE         (0x0003E001) /* ImageType field contents were invalid */
 #define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE           (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
-#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
-#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occured while attempting to upload single flash region */
-#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occured while DMAing FW to host memory */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occurred while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occurred while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occurred while DMAing FW to host memory */
 
 #define IOP_LOGINFO_CODE_DIAG_MSG_ERROR                      (0x00040000) /* Error handling diag msg - or'd with diag status */
 
@@ -187,8 +187,8 @@
 #define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD   (0x00005000)
 
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE          (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occurred on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occurred on SMP Write */
 #define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL      (0x00200040) /* Encl Mgmt services not available for this WWID */
 #define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED    (0x00200050) /* Address Mode not suppored */
 #define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM               (0x00200060) /* Invalid Slot Number in SEP Msg */
@@ -207,8 +207,8 @@
 #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE           (0x00200103) /* SEP NACK'd, it is busy */
 #define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK                (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
 #define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM              (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transfering data */
-#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transferring data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transferring sense data */
 #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1          (0x00200108) /* SEP returned unknown scsi status */
 #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2          (0x00200109) /* SEP returned unknown scsi status */
 #define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP            (0x0020010A) /* SEP returned bad chksum after STOP */
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index ec8080c9808..fa15e853d4e 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -3435,7 +3435,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
  *	If memory has already been allocated, the same (cached) value
  *	is returned.
  *
- *	Return 0 if successfull, or non-zero for failure
+ *	Return 0 if successful, or non-zero for failure
  **/
 int
 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
@@ -6932,7 +6932,7 @@ EXPORT_SYMBOL(mpt_halt_firmware);
  *	Message Unit Reset - instructs the IOC to reset the Reply Post and
  *	Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
  *	All posted buffers are freed, and event notification is turned off.
- *	IOC doesnt reply to any outstanding request. This will transfer IOC
+ *	IOC doesn't reply to any outstanding request. This will transfer IOC
  *	to READY state.
  **/
 int
@@ -7905,7 +7905,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
 		    "Owner", 					/* 15h */
 		"Open Transmit DMA Abort",			/* 16h */
 		"IO Device Missing Delay Retry",		/* 17h */
-		"IO Cancelled Due to Recieve Error",		/* 18h */
+		"IO Cancelled Due to Receive Error",		/* 18h */
 		NULL,						/* 19h */
 		NULL,						/* 1Ah */
 		NULL,						/* 1Bh */
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 1735c84ff75..fe902338539 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2008 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.18"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.18"
+#define MPT_LINUX_VERSION_COMMON	"3.04.19"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.19"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 878bda0cce7..6e6e16aab9d 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -985,7 +985,7 @@ retry_wait:
 	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
 	iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
 	if (iocstat == MPI_IOCSTATUS_SUCCESS) {
-		printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
+		printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
 		return 0;
 	} else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) {
 		printk(MYIOC_s_WARN_FMT "Hmmm...  F/W download not supported!?!\n",
@@ -2407,7 +2407,7 @@ done_free_mem:
 	}
 
 	/* mf is null if command issued successfully
-	 * otherwise, failure occured after mf acquired.
+	 * otherwise, failure occurred after mf acquired.
 	 */
 	if (mf)
 		mpt_free_msg_frame(ioc, mf);
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index f5a14afad2c..7596aecd507 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -307,7 +307,7 @@ mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
-/* free memory assoicated to a sas firmware event */
+/* free memory associated to a sas firmware event */
 static void
 mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
 {
@@ -1094,7 +1094,7 @@ mptsas_block_io_starget(struct scsi_target *starget)
 /**
  * mptsas_target_reset_queue
  *
- * Receive request for TARGET_RESET after recieving an firmware
+ * Receive request for TARGET_RESET after receiving an firmware
  * event NOT_RESPONDING_EVENT, then put command in link list
  * and queue if task_queue already in use.
  *
@@ -1403,7 +1403,7 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 /**
  *	mptsas_add_end_device - report a new end device to sas transport layer
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@phy_info: decribes attached device
+ *	@phy_info: describes attached device
  *
  *	return (0) success (1) failure
  *
@@ -1481,7 +1481,7 @@ mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
 /**
  *	mptsas_del_end_device - report a deleted end device to sas transport layer
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@phy_info: decribes attached device
+ *	@phy_info: describes attached device
  *
  **/
 static void
@@ -5012,7 +5012,6 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 			(ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)) {
 			VirtTarget *vtarget = NULL;
 			u8		id, channel;
-			u32	 log_info = le32_to_cpu(reply->IOCLogInfo);
 
 			id = sas_event_data->TargetID;
 			channel = sas_event_data->Bus;
@@ -5023,7 +5022,8 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 				    "LogInfo (0x%x) available for "
 				   "INTERNAL_DEVICE_RESET"
 				   "fw_id %d fw_channel %d\n", ioc->name,
-				   log_info, id, channel));
+				   le32_to_cpu(reply->IOCLogInfo),
+				   id, channel));
 				if (vtarget->raidVolume) {
 					devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 					"Skipping Raid Volume for inDMD\n",
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 0d9b82a4454..a1d4ee6671b 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1415,11 +1415,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n",
 		ioc->name, SCpnt, done));
 
-	if (ioc->taskmgmt_quiesce_io) {
-		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
-			ioc->name, SCpnt));
+	if (ioc->taskmgmt_quiesce_io)
 		return SCSI_MLQUEUE_HOST_BUSY;
-	}
 
 	/*
 	 *  Put together a MPT SCSI request...
@@ -1773,7 +1770,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	int		 scpnt_idx;
 	int		 retval;
 	VirtDevice	 *vdevice;
-	ulong	 	 sn = SCpnt->serial_number;
 	MPT_ADAPTER	*ioc;
 
 	/* If we can't locate our host adapter structure, return FAILED status.
@@ -1859,8 +1855,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 			 vdevice->vtarget->id, vdevice->lun,
 			 ctx2abort, mptscsih_get_tm_timeout(ioc));
 
-	if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx &&
-	    SCpnt->serial_number == sn) {
+	if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) {
 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		    "task abort: command still in active list! (sc=%p)\n",
 		    ioc->name, SCpnt));
@@ -1873,9 +1868,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	}
 
  out:
-	printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p) (sn=%ld)\n",
+	printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
 	    ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
-	    SCpnt, SCpnt->serial_number);
+	    SCpnt);
 
 	return retval;
 }
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 6d9568d2ec5..8f61ba6aac2 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -867,6 +867,10 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
 	struct _x_config_parms cfg;
 	struct _CONFIG_PAGE_HEADER hdr;
 	int err = -EBUSY;
+	u32 nego_parms;
+	u32 period;
+	struct scsi_device *sdev;
+	int i;
 
 	/* don't allow updating nego parameters on RAID devices */
 	if (starget->channel == 0 &&
@@ -904,6 +908,24 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
 	pg1->Header.PageNumber = hdr.PageNumber;
 	pg1->Header.PageType = hdr.PageType;
 
+	nego_parms = le32_to_cpu(pg1->RequestedParameters);
+	period = (nego_parms & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK) >>
+		MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD;
+	if (period == 8) {
+		/* Turn on inline data padding for TAPE when running U320 */
+		for (i = 0 ; i < 16; i++) {
+			sdev = scsi_device_lookup_by_target(starget, i);
+			if (sdev && sdev->type == TYPE_TAPE) {
+				sdev_printk(KERN_DEBUG, sdev, MYIOC_s_FMT
+					    "IDP:ON\n", ioc->name);
+				nego_parms |= MPI_SCSIDEVPAGE1_RP_IDP;
+				pg1->RequestedParameters =
+				    cpu_to_le32(nego_parms);
+				break;
+			}
+		}
+	}
+
 	mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters));
 
 	if (mpt_config(ioc, &cfg)) {
diff --git a/drivers/message/i2o/README b/drivers/message/i2o/README
index 911fc3021e3..f072a8eb304 100644
--- a/drivers/message/i2o/README
+++ b/drivers/message/i2o/README
@@ -53,7 +53,7 @@ Symbios Logic (Now LSI)
 BoxHill Corporation
 	Loan of initial FibreChannel disk array used for development work.
 
-European Comission
+European Commission
 	Funding the work done by the University of Helsinki
 
 SysKonnect
diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c
index 0ee4264f5db..4547db99f7d 100644
--- a/drivers/message/i2o/device.c
+++ b/drivers/message/i2o/device.c
@@ -65,7 +65,7 @@ int i2o_device_claim(struct i2o_device *dev)
 
 	rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_CLAIM, I2O_CLAIM_PRIMARY);
 	if (!rc)
-		pr_debug("i2o: claim of device %d succeded\n",
+		pr_debug("i2o: claim of device %d succeeded\n",
 			 dev->lct_data.tid);
 	else
 		pr_debug("i2o: claim of device %d failed %d\n",
@@ -110,7 +110,7 @@ int i2o_device_claim_release(struct i2o_device *dev)
 	}
 
 	if (!rc)
-		pr_debug("i2o: claim release of device %d succeded\n",
+		pr_debug("i2o: claim release of device %d succeeded\n",
 			 dev->lct_data.tid);
 	else
 		pr_debug("i2o: claim release of device %d failed %d\n",
@@ -248,7 +248,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
 			goto unreg_dev;
 	}
 
-	/* create user entries refering to this device */
+	/* create user entries referring to this device */
 	list_for_each_entry(tmp, &c->devices, list)
 	    if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
 		&& (tmp != i2o_dev)) {
@@ -267,7 +267,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
 			goto rmlink1;
 	}
 
-	/* create parent entries refering to this device */
+	/* create parent entries referring to this device */
 	list_for_each_entry(tmp, &c->devices, list)
 	    if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
 		&& (tmp != i2o_dev)) {
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 47ec5bc0ed2..4796bbf0ae4 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -610,7 +610,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
 
 	/*
 	 * This is to deail with the case of an application
-	 * opening a device and then the device dissapears while
+	 * opening a device and then the device disappears while
 	 * it's in use, and then the application tries to release
 	 * it.  ex: Unmounting a deleted RAID volume at reboot.
 	 * If we send messages, it will just cause FAILs since
@@ -717,7 +717,7 @@ static unsigned int i2o_block_check_events(struct gendisk *disk,
 
 /**
  *	i2o_block_transfer - Transfer a request to/from the I2O controller
- *	@req: the request which should be transfered
+ *	@req: the request which should be transferred
  *
  *	This function converts the request into a I2O message. The necessary
  *	DMA buffers are allocated and after everything is setup post the message
@@ -1000,7 +1000,6 @@ static struct i2o_block_device *i2o_block_device_alloc(void)
 	gd->major = I2O_MAJOR;
 	gd->queue = queue;
 	gd->fops = &i2o_block_fops;
-	gd->events = DISK_EVENT_MEDIA_CHANGE;
 	gd->private_data = dev;
 
 	dev->gd = gd;
diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h
index 67f921b4419..cf8873cbca3 100644
--- a/drivers/message/i2o/i2o_block.h
+++ b/drivers/message/i2o/i2o_block.h
@@ -73,7 +73,7 @@ struct i2o_block_device {
 	struct i2o_device *i2o_dev;	/* pointer to I2O device */
 	struct gendisk *gd;
 	spinlock_t lock;	/* queue lock */
-	struct list_head open_queue;	/* list of transfered, but unfinished
+	struct list_head open_queue;	/* list of transferred, but unfinished
 					   requests */
 	unsigned int open_queue_depth;	/* number of requests in the queue */
 
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 97bdf82ec90..74fbe56321f 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -204,7 +204,7 @@ static int i2o_scsi_remove(struct device *dev)
  *	i2o_scsi_probe - verify if dev is a I2O SCSI device and install it
  *	@dev: device to verify if it is a I2O SCSI device
  *
- *	Retrieve channel, id and lun for I2O device. If everthing goes well
+ *	Retrieve channel, id and lun for I2O device. If everything goes well
  *	register the I2O device as SCSI device on the I2O SCSI controller.
  *
  *	Returns 0 on success or negative error code on failure.
@@ -361,7 +361,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
 	 */
 	error = le32_to_cpu(msg->body[0]);
 
-	osm_debug("Completed %ld\n", cmd->serial_number);
+	osm_debug("Completed %0x%p\n", cmd);
 
 	cmd->result = error & 0xff;
 	/*
@@ -678,7 +678,7 @@ static int i2o_scsi_queuecommand_lck(struct scsi_cmnd *SCpnt,
 	/* Queue the message */
 	i2o_msg_post(c, msg);
 
-	osm_debug("Issued %ld\n", SCpnt->serial_number);
+	osm_debug("Issued %0x%p\n", SCpnt);
 
 	return 0;
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e2fea580585..3ed3ff06be5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -201,7 +201,7 @@ config TWL4030_POWER
 	  as clock request handshaking.
 
 	  This driver uses board-specific data to initialize the resources
-	  and load scripts controling which resources are switched off/on
+	  and load scripts controlling which resources are switched off/on
 	  or reset when a sleep, wakeup or warm reset event occurs.
 
 config TWL4030_CODEC
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index bc93b2e8230..6421ad1160d 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -314,7 +314,7 @@ int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
 	/* wait for completion of conversion */
 	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) {
 		dev_err(gpadc->dev,
-			"timeout: didnt recieve GPADC conversion interrupt\n");
+			"timeout: didn't receive GPADC conversion interrupt\n");
 		ret = -EINVAL;
 		goto out;
 	}
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index d4a851c6b5b..0b4d5b23bec 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -144,7 +144,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
 	int iter, i;
 	unsigned long flags;
 
-	data->chip->irq_ack(irq_data);
+	data->chip->irq_ack(data);
 
 	for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
 		u32 status;
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index f2f4029e21a..43a76c41cfc 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -185,7 +185,7 @@ static void pcap_isr_work(struct work_struct *work)
 		ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
 		ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
 
-		/* We cant service/ack irqs that are assigned to port 2 */
+		/* We can't service/ack irqs that are assigned to port 2 */
 		if (!(pdata->config & PCAP_SECOND_PORT)) {
 			ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
 			isr &= ~int_sel;
@@ -457,7 +457,7 @@ static int __devinit ezx_pcap_probe(struct spi_device *spi)
 	pcap->workqueue = create_singlethread_workqueue("pcapd");
 	if (!pcap->workqueue) {
 		ret = -ENOMEM;
-		dev_err(&spi->dev, "cant create pcap thread\n");
+		dev_err(&spi->dev, "can't create pcap thread\n");
 		goto free_pcap;
 	}
 
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index d01574d9887..f4c8c844b91 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -55,6 +55,19 @@ int mfd_cell_disable(struct platform_device *pdev)
 }
 EXPORT_SYMBOL(mfd_cell_disable);
 
+static int mfd_platform_add_cell(struct platform_device *pdev,
+				 const struct mfd_cell *cell)
+{
+	if (!cell)
+		return 0;
+
+	pdev->mfd_cell = kmemdup(cell, sizeof(*cell), GFP_KERNEL);
+	if (!pdev->mfd_cell)
+		return -ENOMEM;
+
+	return 0;
+}
+
 static int mfd_add_device(struct device *parent, int id,
 			  const struct mfd_cell *cell,
 			  struct resource *mem_base,
@@ -75,7 +88,7 @@ static int mfd_add_device(struct device *parent, int id,
 
 	pdev->dev.parent = parent;
 
-	ret = platform_device_add_data(pdev, cell, sizeof(*cell));
+	ret = mfd_platform_add_cell(pdev, cell);
 	if (ret)
 		goto fail_res;
 
@@ -123,7 +136,6 @@ static int mfd_add_device(struct device *parent, int id,
 
 	return 0;
 
-/*	platform_device_del(pdev); */
 fail_res:
 	kfree(res);
 fail_device:
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index cb01209754e..3ab9ffa00aa 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -25,7 +25,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
 #include <plat/usb.h>
 
 #define USBHS_DRIVER_NAME	"usbhs-omap"
@@ -332,7 +331,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 	int				i;
 
 	if (!pdata) {
-		dev_err(dev, "Missing platfrom data\n");
+		dev_err(dev, "Missing platform data\n");
 		ret = -ENOMEM;
 		goto end_probe;
 	}
@@ -700,8 +699,7 @@ static int usbhs_enable(struct device *dev)
 	dev_dbg(dev, "starting TI HSUSB Controller\n");
 	if (!pdata) {
 		dev_dbg(dev, "missing platform_data\n");
-		ret =  -ENODEV;
-		goto end_enable;
+		return  -ENODEV;
 	}
 
 	spin_lock_irqsave(&omap->lock, flags);
@@ -719,14 +717,14 @@ static int usbhs_enable(struct device *dev)
 			gpio_request(pdata->ehci_data->reset_gpio_port[0],
 						"USB1 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[0], 1);
+				(pdata->ehci_data->reset_gpio_port[0], 0);
 		}
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
 			gpio_request(pdata->ehci_data->reset_gpio_port[1],
 						"USB2 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[1], 1);
+				(pdata->ehci_data->reset_gpio_port[1], 0);
 		}
 
 		/* Hold the PHY in RESET for enough time till DIR is high */
@@ -906,16 +904,17 @@ static int usbhs_enable(struct device *dev)
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[0], 0);
+				(pdata->ehci_data->reset_gpio_port[0], 1);
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[1], 0);
+				(pdata->ehci_data->reset_gpio_port[1], 1);
 	}
 
 end_count:
 	omap->count++;
-	goto end_enable;
+	spin_unlock_irqrestore(&omap->lock, flags);
+	return 0;
 
 err_tll:
 	if (pdata->ehci_data->phy_reset) {
@@ -931,8 +930,6 @@ err_tll:
 	clk_disable(omap->usbhost_fs_fck);
 	clk_disable(omap->usbhost_hs_fck);
 	clk_disable(omap->usbhost_ick);
-
-end_enable:
 	spin_unlock_irqrestore(&omap->lock, flags);
 	return ret;
 }
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index c7687f6a78a..57868416c76 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -51,7 +51,7 @@ static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
 
 }
 
-/* Read a block of upto 32 regs  */
+/* Read a block of up to 32 regs  */
 int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
 					int nr_regs, u8 *data)
 {
@@ -65,7 +65,7 @@ int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
 }
 EXPORT_SYMBOL_GPL(pcf50633_read_block);
 
-/* Write a block of upto 32 regs  */
+/* Write a block of up to 32 regs  */
 int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
 					int nr_regs, u8 *data)
 {
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 16422de0823..2c0d4d16491 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -447,12 +447,13 @@ static int __init load_twl4030_script(struct twl4030_script *tscript,
 		if (err)
 			goto out;
 	}
-	if (tscript->flags & TWL4030_SLEEP_SCRIPT)
+	if (tscript->flags & TWL4030_SLEEP_SCRIPT) {
 		if (order)
 			pr_warning("TWL4030: Bad order of scripts (sleep "\
 					"script before wakeup) Leads to boot"\
 					"failure on some boards\n");
 		err = twl4030_config_sleep_sequence(address);
+	}
 out:
 	return err;
 }
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index fa937052fba..dfbae34e180 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -229,7 +229,7 @@ int twl6030_mmc_card_detect_config(void)
 	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
 						REG_INT_MSK_STS_B);
 	/*
-	 * Intially Configuring MMC_CTRL for receving interrupts &
+	 * Initially Configuring MMC_CTRL for receiving interrupts &
 	 * Card status on TWL6030 for MMC1
 	 */
 	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
@@ -275,7 +275,7 @@ int twl6030_mmc_card_detect(struct device *dev, int slot)
 		/* TWL6030 provide's Card detect support for
 		 * only MMC1 controller.
 		 */
-		pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__);
+		pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
 		return ret;
 	}
 	/*
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index d73f84ba0f0..daf69527ed8 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -8,7 +8,7 @@
  *  Copyright:	MontaVista Software, Inc.
  *
  * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
  * dont bother Nicolas please ;-)
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e007c6a4b4..d80dcdee88f 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -481,5 +481,6 @@ source "drivers/misc/cb710/Kconfig"
 source "drivers/misc/iwmc3200top/Kconfig"
 source "drivers/misc/ti-st/Kconfig"
 source "drivers/misc/lis3lv02d/Kconfig"
+source "drivers/misc/carma/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f5468602961..848e8464faa 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
 obj-y				+= ti-st/
 obj-$(CONFIG_AB8500_PWM)	+= ab8500-pwm.o
 obj-y				+= lis3lv02d/
+obj-y				+= carma/
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index ecd276ad6b1..5f898cb706a 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -2,7 +2,7 @@
 
     This driver supports the bmp085 digital barometric pressure
     and temperature sensor from Bosch Sensortec. The datasheet
-    is avaliable from their website:
+    is available from their website:
     http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
 
     A pressure measurement is issued by reading from pressure0_input.
@@ -429,7 +429,7 @@ static int __devinit bmp085_probe(struct i2c_client *client,
 	if (err)
 		goto exit_free;
 
-	dev_info(&data->client->dev, "Succesfully initialized bmp085!\n");
+	dev_info(&data->client->dev, "Successfully initialized bmp085!\n");
 	goto exit;
 
 exit_free:
diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c
index 338dcc12150..778fc3fdfb9 100644
--- a/drivers/misc/c2port/c2port-duramar2150.c
+++ b/drivers/misc/c2port/c2port-duramar2150.c
@@ -41,7 +41,7 @@ static void duramar2150_c2port_access(struct c2port_device *dev, int status)
 		outb(v | (C2D | C2CK), DIR_PORT);
 	else
 		/* When access is "off" is important that both lines are set
-		 * as inputs or hi-impedence */
+		 * as inputs or hi-impedance */
 		outb(v & ~(C2D | C2CK), DIR_PORT);
 
 	mutex_unlock(&update_lock);
diff --git a/drivers/misc/carma/Kconfig b/drivers/misc/carma/Kconfig
new file mode 100644
index 00000000000..c90370ed712
--- /dev/null
+++ b/drivers/misc/carma/Kconfig
@@ -0,0 +1,17 @@
+config CARMA_FPGA
+	tristate "CARMA DATA-FPGA Access Driver"
+	depends on FSL_SOC && PPC_83xx && MEDIA_SUPPORT && HAS_DMA && FSL_DMA
+	select VIDEOBUF_DMA_SG
+	default n
+	help
+	  Say Y here to include support for communicating with the data
+	  processing FPGAs on the OVRO CARMA board.
+
+config CARMA_FPGA_PROGRAM
+	tristate "CARMA DATA-FPGA Programmer"
+	depends on FSL_SOC && PPC_83xx && MEDIA_SUPPORT && HAS_DMA && FSL_DMA
+	select VIDEOBUF_DMA_SG
+	default n
+	help
+	  Say Y here to include support for programming the data processing
+	  FPGAs on the OVRO CARMA board.
diff --git a/drivers/misc/carma/Makefile b/drivers/misc/carma/Makefile
new file mode 100644
index 00000000000..ff36ac2ce53
--- /dev/null
+++ b/drivers/misc/carma/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_CARMA_FPGA)		+= carma-fpga.o
+obj-$(CONFIG_CARMA_FPGA_PROGRAM)	+= carma-fpga-program.o
diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c
new file mode 100644
index 00000000000..7ce6065dc20
--- /dev/null
+++ b/drivers/misc/carma/carma-fpga-program.c
@@ -0,0 +1,1141 @@
+/*
+ * CARMA Board DATA-FPGA Programmer
+ *
+ * Copyright (c) 2009-2011 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/completion.h>
+#include <linux/miscdevice.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+
+#include <media/videobuf-dma-sg.h>
+
+/* MPC8349EMDS specific get_immrbase() */
+#include <sysdev/fsl_soc.h>
+
+static const char drv_name[] = "carma-fpga-program";
+
+/*
+ * Firmware images are always this exact size
+ *
+ * 12849552 bytes for a CARMA Digitizer Board (EP2S90 FPGAs)
+ * 18662880 bytes for a CARMA Correlator Board (EP2S130 FPGAs)
+ */
+#define FW_SIZE_EP2S90		12849552
+#define FW_SIZE_EP2S130		18662880
+
+struct fpga_dev {
+	struct miscdevice miscdev;
+
+	/* Reference count */
+	struct kref ref;
+
+	/* Device Registers */
+	struct device *dev;
+	void __iomem *regs;
+	void __iomem *immr;
+
+	/* Freescale DMA Device */
+	struct dma_chan *chan;
+
+	/* Interrupts */
+	int irq, status;
+	struct completion completion;
+
+	/* FPGA Bitfile */
+	struct mutex lock;
+
+	struct videobuf_dmabuf vb;
+	bool vb_allocated;
+
+	/* max size and written bytes */
+	size_t fw_size;
+	size_t bytes;
+};
+
+/*
+ * FPGA Bitfile Helpers
+ */
+
+/**
+ * fpga_drop_firmware_data() - drop the bitfile image from memory
+ * @priv: the driver's private data structure
+ *
+ * LOCKING: must hold priv->lock
+ */
+static void fpga_drop_firmware_data(struct fpga_dev *priv)
+{
+	videobuf_dma_free(&priv->vb);
+	priv->vb_allocated = false;
+	priv->bytes = 0;
+}
+
+/*
+ * Private Data Reference Count
+ */
+
+static void fpga_dev_remove(struct kref *ref)
+{
+	struct fpga_dev *priv = container_of(ref, struct fpga_dev, ref);
+
+	/* free any firmware image that was not programmed */
+	fpga_drop_firmware_data(priv);
+
+	mutex_destroy(&priv->lock);
+	kfree(priv);
+}
+
+/*
+ * LED Trigger (could be a seperate module)
+ */
+
+/*
+ * NOTE: this whole thing does have the problem that whenever the led's are
+ * NOTE: first set to use the fpga trigger, they could be in the wrong state
+ */
+
+DEFINE_LED_TRIGGER(ledtrig_fpga);
+
+static void ledtrig_fpga_programmed(bool enabled)
+{
+	if (enabled)
+		led_trigger_event(ledtrig_fpga, LED_FULL);
+	else
+		led_trigger_event(ledtrig_fpga, LED_OFF);
+}
+
+/*
+ * FPGA Register Helpers
+ */
+
+/* Register Definitions */
+#define FPGA_CONFIG_CONTROL		0x40
+#define FPGA_CONFIG_STATUS		0x44
+#define FPGA_CONFIG_FIFO_SIZE		0x48
+#define FPGA_CONFIG_FIFO_USED		0x4C
+#define FPGA_CONFIG_TOTAL_BYTE_COUNT	0x50
+#define FPGA_CONFIG_CUR_BYTE_COUNT	0x54
+
+#define FPGA_FIFO_ADDRESS		0x3000
+
+static int fpga_fifo_size(void __iomem *regs)
+{
+	return ioread32be(regs + FPGA_CONFIG_FIFO_SIZE);
+}
+
+#define CFG_STATUS_ERR_MASK	0xfffe
+
+static int fpga_config_error(void __iomem *regs)
+{
+	return ioread32be(regs + FPGA_CONFIG_STATUS) & CFG_STATUS_ERR_MASK;
+}
+
+static int fpga_fifo_empty(void __iomem *regs)
+{
+	return ioread32be(regs + FPGA_CONFIG_FIFO_USED) == 0;
+}
+
+static void fpga_fifo_write(void __iomem *regs, u32 val)
+{
+	iowrite32be(val, regs + FPGA_FIFO_ADDRESS);
+}
+
+static void fpga_set_byte_count(void __iomem *regs, u32 count)
+{
+	iowrite32be(count, regs + FPGA_CONFIG_TOTAL_BYTE_COUNT);
+}
+
+#define CFG_CTL_ENABLE	(1 << 0)
+#define CFG_CTL_RESET	(1 << 1)
+#define CFG_CTL_DMA	(1 << 2)
+
+static void fpga_programmer_enable(struct fpga_dev *priv, bool dma)
+{
+	u32 val;
+
+	val = (dma) ? (CFG_CTL_ENABLE | CFG_CTL_DMA) : CFG_CTL_ENABLE;
+	iowrite32be(val, priv->regs + FPGA_CONFIG_CONTROL);
+}
+
+static void fpga_programmer_disable(struct fpga_dev *priv)
+{
+	iowrite32be(0x0, priv->regs + FPGA_CONFIG_CONTROL);
+}
+
+static void fpga_dump_registers(struct fpga_dev *priv)
+{
+	u32 control, status, size, used, total, curr;
+
+	/* good status: do nothing */
+	if (priv->status == 0)
+		return;
+
+	/* Dump all status registers */
+	control = ioread32be(priv->regs + FPGA_CONFIG_CONTROL);
+	status = ioread32be(priv->regs + FPGA_CONFIG_STATUS);
+	size = ioread32be(priv->regs + FPGA_CONFIG_FIFO_SIZE);
+	used = ioread32be(priv->regs + FPGA_CONFIG_FIFO_USED);
+	total = ioread32be(priv->regs + FPGA_CONFIG_TOTAL_BYTE_COUNT);
+	curr = ioread32be(priv->regs + FPGA_CONFIG_CUR_BYTE_COUNT);
+
+	dev_err(priv->dev, "Configuration failed, dumping status registers\n");
+	dev_err(priv->dev, "Control:    0x%.8x\n", control);
+	dev_err(priv->dev, "Status:     0x%.8x\n", status);
+	dev_err(priv->dev, "FIFO Size:  0x%.8x\n", size);
+	dev_err(priv->dev, "FIFO Used:  0x%.8x\n", used);
+	dev_err(priv->dev, "FIFO Total: 0x%.8x\n", total);
+	dev_err(priv->dev, "FIFO Curr:  0x%.8x\n", curr);
+}
+
+/*
+ * FPGA Power Supply Code
+ */
+
+#define CTL_PWR_CONTROL		0x2006
+#define CTL_PWR_STATUS		0x200A
+#define CTL_PWR_FAIL		0x200B
+
+#define PWR_CONTROL_ENABLE	0x01
+
+#define PWR_STATUS_ERROR_MASK	0x10
+#define PWR_STATUS_GOOD		0x0f
+
+/*
+ * Determine if the FPGA power is good for all supplies
+ */
+static bool fpga_power_good(struct fpga_dev *priv)
+{
+	u8 val;
+
+	val = ioread8(priv->regs + CTL_PWR_STATUS);
+	if (val & PWR_STATUS_ERROR_MASK)
+		return false;
+
+	return val == PWR_STATUS_GOOD;
+}
+
+/*
+ * Disable the FPGA power supplies
+ */
+static void fpga_disable_power_supplies(struct fpga_dev *priv)
+{
+	unsigned long start;
+	u8 val;
+
+	iowrite8(0x0, priv->regs + CTL_PWR_CONTROL);
+
+	/*
+	 * Wait 500ms for the power rails to discharge
+	 *
+	 * Without this delay, the CTL-CPLD state machine can get into a
+	 * state where it is waiting for the power-goods to assert, but they
+	 * never do. This only happens when enabling and disabling the
+	 * power sequencer very rapidly.
+	 *
+	 * The loop below will also wait for the power goods to de-assert,
+	 * but testing has shown that they are always disabled by the time
+	 * the sleep completes. However, omitting the sleep and only waiting
+	 * for the power-goods to de-assert was not sufficient to ensure
+	 * that the power sequencer would not wedge itself.
+	 */
+	msleep(500);
+
+	start = jiffies;
+	while (time_before(jiffies, start + HZ)) {
+		val = ioread8(priv->regs + CTL_PWR_STATUS);
+		if (!(val & PWR_STATUS_GOOD))
+			break;
+
+		usleep_range(5000, 10000);
+	}
+
+	val = ioread8(priv->regs + CTL_PWR_STATUS);
+	if (val & PWR_STATUS_GOOD) {
+		dev_err(priv->dev, "power disable failed: "
+				   "power goods: status 0x%.2x\n", val);
+	}
+
+	if (val & PWR_STATUS_ERROR_MASK) {
+		dev_err(priv->dev, "power disable failed: "
+				   "alarm bit set: status 0x%.2x\n", val);
+	}
+}
+
+/**
+ * fpga_enable_power_supplies() - enable the DATA-FPGA power supplies
+ * @priv: the driver's private data structure
+ *
+ * Enable the DATA-FPGA power supplies, waiting up to 1 second for
+ * them to enable successfully.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int fpga_enable_power_supplies(struct fpga_dev *priv)
+{
+	unsigned long start = jiffies;
+
+	if (fpga_power_good(priv)) {
+		dev_dbg(priv->dev, "power was already good\n");
+		return 0;
+	}
+
+	iowrite8(PWR_CONTROL_ENABLE, priv->regs + CTL_PWR_CONTROL);
+	while (time_before(jiffies, start + HZ)) {
+		if (fpga_power_good(priv))
+			return 0;
+
+		usleep_range(5000, 10000);
+	}
+
+	return fpga_power_good(priv) ? 0 : -ETIMEDOUT;
+}
+
+/*
+ * Determine if the FPGA power supplies are all enabled
+ */
+static bool fpga_power_enabled(struct fpga_dev *priv)
+{
+	u8 val;
+
+	val = ioread8(priv->regs + CTL_PWR_CONTROL);
+	if (val & PWR_CONTROL_ENABLE)
+		return true;
+
+	return false;
+}
+
+/*
+ * Determine if the FPGA's are programmed and running correctly
+ */
+static bool fpga_running(struct fpga_dev *priv)
+{
+	if (!fpga_power_good(priv))
+		return false;
+
+	/* Check the config done bit */
+	return ioread32be(priv->regs + FPGA_CONFIG_STATUS) & (1 << 18);
+}
+
+/*
+ * FPGA Programming Code
+ */
+
+/**
+ * fpga_program_block() - put a block of data into the programmer's FIFO
+ * @priv: the driver's private data structure
+ * @buf: the data to program
+ * @count: the length of data to program (must be a multiple of 4 bytes)
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int fpga_program_block(struct fpga_dev *priv, void *buf, size_t count)
+{
+	u32 *data = buf;
+	int size = fpga_fifo_size(priv->regs);
+	int i, len;
+	unsigned long timeout;
+
+	/* enforce correct data length for the FIFO */
+	BUG_ON(count % 4 != 0);
+
+	while (count > 0) {
+
+		/* Get the size of the block to write (maximum is FIFO_SIZE) */
+		len = min_t(size_t, count, size);
+		timeout = jiffies + HZ / 4;
+
+		/* Write the block */
+		for (i = 0; i < len / 4; i++)
+			fpga_fifo_write(priv->regs, data[i]);
+
+		/* Update the amounts left */
+		count -= len;
+		data += len / 4;
+
+		/* Wait for the fifo to empty */
+		while (true) {
+
+			if (fpga_fifo_empty(priv->regs)) {
+				break;
+			} else {
+				dev_dbg(priv->dev, "Fifo not empty\n");
+				cpu_relax();
+			}
+
+			if (fpga_config_error(priv->regs)) {
+				dev_err(priv->dev, "Error detected\n");
+				return -EIO;
+			}
+
+			if (time_after(jiffies, timeout)) {
+				dev_err(priv->dev, "Fifo drain timeout\n");
+				return -ETIMEDOUT;
+			}
+
+			usleep_range(5000, 10000);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * fpga_program_cpu() - program the DATA-FPGA's using the CPU
+ * @priv: the driver's private data structure
+ *
+ * This is useful when the DMA programming method fails. It is possible to
+ * wedge the Freescale DMA controller such that the DMA programming method
+ * always fails. This method has always succeeded.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static noinline int fpga_program_cpu(struct fpga_dev *priv)
+{
+	int ret;
+
+	/* Disable the programmer */
+	fpga_programmer_disable(priv);
+
+	/* Set the total byte count */
+	fpga_set_byte_count(priv->regs, priv->bytes);
+	dev_dbg(priv->dev, "total byte count %u bytes\n", priv->bytes);
+
+	/* Enable the controller for programming */
+	fpga_programmer_enable(priv, false);
+	dev_dbg(priv->dev, "enabled the controller\n");
+
+	/* Write each chunk of the FPGA bitfile to FPGA programmer */
+	ret = fpga_program_block(priv, priv->vb.vaddr, priv->bytes);
+	if (ret)
+		goto out_disable_controller;
+
+	/* Wait for the interrupt handler to signal that programming finished */
+	ret = wait_for_completion_timeout(&priv->completion, 2 * HZ);
+	if (!ret) {
+		dev_err(priv->dev, "Timed out waiting for completion\n");
+		ret = -ETIMEDOUT;
+		goto out_disable_controller;
+	}
+
+	/* Retrieve the status from the interrupt handler */
+	ret = priv->status;
+
+out_disable_controller:
+	fpga_programmer_disable(priv);
+	return ret;
+}
+
+#define FIFO_DMA_ADDRESS	0xf0003000
+#define FIFO_MAX_LEN		4096
+
+/**
+ * fpga_program_dma() - program the DATA-FPGA's using the DMA engine
+ * @priv: the driver's private data structure
+ *
+ * Program the DATA-FPGA's using the Freescale DMA engine. This requires that
+ * the engine is programmed such that the hardware DMA request lines can
+ * control the entire DMA transaction. The system controller FPGA then
+ * completely offloads the programming from the CPU.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static noinline int fpga_program_dma(struct fpga_dev *priv)
+{
+	struct videobuf_dmabuf *vb = &priv->vb;
+	struct dma_chan *chan = priv->chan;
+	struct dma_async_tx_descriptor *tx;
+	size_t num_pages, len, avail = 0;
+	struct dma_slave_config config;
+	struct scatterlist *sg;
+	struct sg_table table;
+	dma_cookie_t cookie;
+	int ret, i;
+
+	/* Disable the programmer */
+	fpga_programmer_disable(priv);
+
+	/* Allocate a scatterlist for the DMA destination */
+	num_pages = DIV_ROUND_UP(priv->bytes, FIFO_MAX_LEN);
+	ret = sg_alloc_table(&table, num_pages, GFP_KERNEL);
+	if (ret) {
+		dev_err(priv->dev, "Unable to allocate dst scatterlist\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	/*
+	 * This is an ugly hack
+	 *
+	 * We fill in a scatterlist as if it were mapped for DMA. This is
+	 * necessary because there exists no better structure for this
+	 * inside the kernel code.
+	 *
+	 * As an added bonus, we can use the DMAEngine API for all of this,
+	 * rather than inventing another extremely similar API.
+	 */
+	avail = priv->bytes;
+	for_each_sg(table.sgl, sg, num_pages, i) {
+		len = min_t(size_t, avail, FIFO_MAX_LEN);
+		sg_dma_address(sg) = FIFO_DMA_ADDRESS;
+		sg_dma_len(sg) = len;
+
+		avail -= len;
+	}
+
+	/* Map the buffer for DMA */
+	ret = videobuf_dma_map(priv->dev, &priv->vb);
+	if (ret) {
+		dev_err(priv->dev, "Unable to map buffer for DMA\n");
+		goto out_free_table;
+	}
+
+	/*
+	 * Configure the DMA channel to transfer FIFO_SIZE / 2 bytes per
+	 * transaction, and then put it under external control
+	 */
+	memset(&config, 0, sizeof(config));
+	config.direction = DMA_TO_DEVICE;
+	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	config.dst_maxburst = fpga_fifo_size(priv->regs) / 2 / 4;
+	ret = chan->device->device_control(chan, DMA_SLAVE_CONFIG,
+					   (unsigned long)&config);
+	if (ret) {
+		dev_err(priv->dev, "DMA slave configuration failed\n");
+		goto out_dma_unmap;
+	}
+
+	ret = chan->device->device_control(chan, FSLDMA_EXTERNAL_START, 1);
+	if (ret) {
+		dev_err(priv->dev, "DMA external control setup failed\n");
+		goto out_dma_unmap;
+	}
+
+	/* setup and submit the DMA transaction */
+	tx = chan->device->device_prep_dma_sg(chan,
+					      table.sgl, num_pages,
+					      vb->sglist, vb->sglen, 0);
+	if (!tx) {
+		dev_err(priv->dev, "Unable to prep DMA transaction\n");
+		ret = -ENOMEM;
+		goto out_dma_unmap;
+	}
+
+	cookie = tx->tx_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(priv->dev, "Unable to submit DMA transaction\n");
+		ret = -ENOMEM;
+		goto out_dma_unmap;
+	}
+
+	dma_async_memcpy_issue_pending(chan);
+
+	/* Set the total byte count */
+	fpga_set_byte_count(priv->regs, priv->bytes);
+	dev_dbg(priv->dev, "total byte count %u bytes\n", priv->bytes);
+
+	/* Enable the controller for DMA programming */
+	fpga_programmer_enable(priv, true);
+	dev_dbg(priv->dev, "enabled the controller\n");
+
+	/* Wait for the interrupt handler to signal that programming finished */
+	ret = wait_for_completion_timeout(&priv->completion, 2 * HZ);
+	if (!ret) {
+		dev_err(priv->dev, "Timed out waiting for completion\n");
+		ret = -ETIMEDOUT;
+		goto out_disable_controller;
+	}
+
+	/* Retrieve the status from the interrupt handler */
+	ret = priv->status;
+
+out_disable_controller:
+	fpga_programmer_disable(priv);
+out_dma_unmap:
+	videobuf_dma_unmap(priv->dev, vb);
+out_free_table:
+	sg_free_table(&table);
+out_return:
+	return ret;
+}
+
+/*
+ * Interrupt Handling
+ */
+
+static irqreturn_t fpga_irq(int irq, void *dev_id)
+{
+	struct fpga_dev *priv = dev_id;
+
+	/* Save the status */
+	priv->status = fpga_config_error(priv->regs) ? -EIO : 0;
+	dev_dbg(priv->dev, "INTERRUPT status %d\n", priv->status);
+	fpga_dump_registers(priv);
+
+	/* Disabling the programmer clears the interrupt */
+	fpga_programmer_disable(priv);
+
+	/* Notify any waiters */
+	complete(&priv->completion);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * SYSFS Helpers
+ */
+
+/**
+ * fpga_do_stop() - deconfigure (reset) the DATA-FPGA's
+ * @priv: the driver's private data structure
+ *
+ * LOCKING: must hold priv->lock
+ */
+static int fpga_do_stop(struct fpga_dev *priv)
+{
+	u32 val;
+
+	/* Set the led to unprogrammed */
+	ledtrig_fpga_programmed(false);
+
+	/* Pulse the config line to reset the FPGA's */
+	val = CFG_CTL_ENABLE | CFG_CTL_RESET;
+	iowrite32be(val, priv->regs + FPGA_CONFIG_CONTROL);
+	iowrite32be(0x0, priv->regs + FPGA_CONFIG_CONTROL);
+
+	return 0;
+}
+
+static noinline int fpga_do_program(struct fpga_dev *priv)
+{
+	int ret;
+
+	if (priv->bytes != priv->fw_size) {
+		dev_err(priv->dev, "Incorrect bitfile size: got %zu bytes, "
+				   "should be %zu bytes\n",
+				   priv->bytes, priv->fw_size);
+		return -EINVAL;
+	}
+
+	if (!fpga_power_enabled(priv)) {
+		dev_err(priv->dev, "Power not enabled\n");
+		return -EINVAL;
+	}
+
+	if (!fpga_power_good(priv)) {
+		dev_err(priv->dev, "Power not good\n");
+		return -EINVAL;
+	}
+
+	/* Set the LED to unprogrammed */
+	ledtrig_fpga_programmed(false);
+
+	/* Try to program the FPGA's using DMA */
+	ret = fpga_program_dma(priv);
+
+	/* If DMA failed or doesn't exist, try with CPU */
+	if (ret) {
+		dev_warn(priv->dev, "Falling back to CPU programming\n");
+		ret = fpga_program_cpu(priv);
+	}
+
+	if (ret) {
+		dev_err(priv->dev, "Unable to program FPGA's\n");
+		return ret;
+	}
+
+	/* Drop the firmware bitfile from memory */
+	fpga_drop_firmware_data(priv);
+
+	dev_dbg(priv->dev, "FPGA programming successful\n");
+	ledtrig_fpga_programmed(true);
+
+	return 0;
+}
+
+/*
+ * File Operations
+ */
+
+static int fpga_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * The miscdevice layer puts our struct miscdevice into the
+	 * filp->private_data field. We use this to find our private
+	 * data and then overwrite it with our own private structure.
+	 */
+	struct fpga_dev *priv = container_of(filp->private_data,
+					     struct fpga_dev, miscdev);
+	unsigned int nr_pages;
+	int ret;
+
+	/* We only allow one process at a time */
+	ret = mutex_lock_interruptible(&priv->lock);
+	if (ret)
+		return ret;
+
+	filp->private_data = priv;
+	kref_get(&priv->ref);
+
+	/* Truncation: drop any existing data */
+	if (filp->f_flags & O_TRUNC)
+		priv->bytes = 0;
+
+	/* Check if we have already allocated a buffer */
+	if (priv->vb_allocated)
+		return 0;
+
+	/* Allocate a buffer to hold enough data for the bitfile */
+	nr_pages = DIV_ROUND_UP(priv->fw_size, PAGE_SIZE);
+	ret = videobuf_dma_init_kernel(&priv->vb, DMA_TO_DEVICE, nr_pages);
+	if (ret) {
+		dev_err(priv->dev, "unable to allocate data buffer\n");
+		mutex_unlock(&priv->lock);
+		kref_put(&priv->ref, fpga_dev_remove);
+		return ret;
+	}
+
+	priv->vb_allocated = true;
+	return 0;
+}
+
+static int fpga_release(struct inode *inode, struct file *filp)
+{
+	struct fpga_dev *priv = filp->private_data;
+
+	mutex_unlock(&priv->lock);
+	kref_put(&priv->ref, fpga_dev_remove);
+	return 0;
+}
+
+static ssize_t fpga_write(struct file *filp, const char __user *buf,
+			  size_t count, loff_t *f_pos)
+{
+	struct fpga_dev *priv = filp->private_data;
+
+	/* FPGA bitfiles have an exact size: disallow anything else */
+	if (priv->bytes >= priv->fw_size)
+		return -ENOSPC;
+
+	count = min_t(size_t, priv->fw_size - priv->bytes, count);
+	if (copy_from_user(priv->vb.vaddr + priv->bytes, buf, count))
+		return -EFAULT;
+
+	priv->bytes += count;
+	return count;
+}
+
+static ssize_t fpga_read(struct file *filp, char __user *buf, size_t count,
+			 loff_t *f_pos)
+{
+	struct fpga_dev *priv = filp->private_data;
+
+	count = min_t(size_t, priv->bytes - *f_pos, count);
+	if (copy_to_user(buf, priv->vb.vaddr + *f_pos, count))
+		return -EFAULT;
+
+	*f_pos += count;
+	return count;
+}
+
+static loff_t fpga_llseek(struct file *filp, loff_t offset, int origin)
+{
+	struct fpga_dev *priv = filp->private_data;
+	loff_t newpos;
+
+	/* only read-only opens are allowed to seek */
+	if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
+		return -EINVAL;
+
+	switch (origin) {
+	case SEEK_SET: /* seek relative to the beginning of the file */
+		newpos = offset;
+		break;
+	case SEEK_CUR: /* seek relative to current position in the file */
+		newpos = filp->f_pos + offset;
+		break;
+	case SEEK_END: /* seek relative to the end of the file */
+		newpos = priv->fw_size - offset;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* check for sanity */
+	if (newpos > priv->fw_size)
+		return -EINVAL;
+
+	filp->f_pos = newpos;
+	return newpos;
+}
+
+static const struct file_operations fpga_fops = {
+	.open		= fpga_open,
+	.release	= fpga_release,
+	.write		= fpga_write,
+	.read		= fpga_read,
+	.llseek		= fpga_llseek,
+};
+
+/*
+ * Device Attributes
+ */
+
+static ssize_t pfail_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	u8 val;
+
+	val = ioread8(priv->regs + CTL_PWR_FAIL);
+	return snprintf(buf, PAGE_SIZE, "0x%.2x\n", val);
+}
+
+static ssize_t pgood_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	return snprintf(buf, PAGE_SIZE, "%d\n", fpga_power_good(priv));
+}
+
+static ssize_t penable_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	return snprintf(buf, PAGE_SIZE, "%d\n", fpga_power_enabled(priv));
+}
+
+static ssize_t penable_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	if (strict_strtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val) {
+		ret = fpga_enable_power_supplies(priv);
+		if (ret)
+			return ret;
+	} else {
+		fpga_do_stop(priv);
+		fpga_disable_power_supplies(priv);
+	}
+
+	return count;
+}
+
+static ssize_t program_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	return snprintf(buf, PAGE_SIZE, "%d\n", fpga_running(priv));
+}
+
+static ssize_t program_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	if (strict_strtoul(buf, 0, &val))
+		return -EINVAL;
+
+	/* We can't have an image writer and be programming simultaneously */
+	if (mutex_lock_interruptible(&priv->lock))
+		return -ERESTARTSYS;
+
+	/* Program or Reset the FPGA's */
+	ret = val ? fpga_do_program(priv) : fpga_do_stop(priv);
+	if (ret)
+		goto out_unlock;
+
+	/* Success */
+	ret = count;
+
+out_unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static DEVICE_ATTR(power_fail, S_IRUGO, pfail_show, NULL);
+static DEVICE_ATTR(power_good, S_IRUGO, pgood_show, NULL);
+static DEVICE_ATTR(power_enable, S_IRUGO | S_IWUSR,
+		   penable_show, penable_store);
+
+static DEVICE_ATTR(program, S_IRUGO | S_IWUSR,
+		   program_show, program_store);
+
+static struct attribute *fpga_attributes[] = {
+	&dev_attr_power_fail.attr,
+	&dev_attr_power_good.attr,
+	&dev_attr_power_enable.attr,
+	&dev_attr_program.attr,
+	NULL,
+};
+
+static const struct attribute_group fpga_attr_group = {
+	.attrs = fpga_attributes,
+};
+
+/*
+ * OpenFirmware Device Subsystem
+ */
+
+#define SYS_REG_VERSION		0x00
+#define SYS_REG_GEOGRAPHIC	0x10
+
+static bool dma_filter(struct dma_chan *chan, void *data)
+{
+	/*
+	 * DMA Channel #0 is the only acceptable device
+	 *
+	 * This probably won't survive an unload/load cycle of the Freescale
+	 * DMAEngine driver, but that won't be a problem
+	 */
+	return chan->chan_id == 0 && chan->device->dev_id == 0;
+}
+
+static int fpga_of_remove(struct platform_device *op)
+{
+	struct fpga_dev *priv = dev_get_drvdata(&op->dev);
+	struct device *this_device = priv->miscdev.this_device;
+
+	sysfs_remove_group(&this_device->kobj, &fpga_attr_group);
+	misc_deregister(&priv->miscdev);
+
+	free_irq(priv->irq, priv);
+	irq_dispose_mapping(priv->irq);
+
+	/* make sure the power supplies are off */
+	fpga_disable_power_supplies(priv);
+
+	/* unmap registers */
+	iounmap(priv->immr);
+	iounmap(priv->regs);
+
+	dma_release_channel(priv->chan);
+
+	/* drop our reference to the private data structure */
+	kref_put(&priv->ref, fpga_dev_remove);
+	return 0;
+}
+
+/* CTL-CPLD Version Register */
+#define CTL_CPLD_VERSION	0x2000
+
+static int fpga_of_probe(struct platform_device *op,
+			 const struct of_device_id *match)
+{
+	struct device_node *of_node = op->dev.of_node;
+	struct device *this_device;
+	struct fpga_dev *priv;
+	dma_cap_mask_t mask;
+	u32 ver;
+	int ret;
+
+	/* Allocate private data */
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&op->dev, "Unable to allocate private data\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	/* Setup the miscdevice */
+	priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+	priv->miscdev.name = drv_name;
+	priv->miscdev.fops = &fpga_fops;
+
+	kref_init(&priv->ref);
+
+	dev_set_drvdata(&op->dev, priv);
+	priv->dev = &op->dev;
+	mutex_init(&priv->lock);
+	init_completion(&priv->completion);
+	videobuf_dma_init(&priv->vb);
+
+	dev_set_drvdata(priv->dev, priv);
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_MEMCPY, mask);
+	dma_cap_set(DMA_INTERRUPT, mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_cap_set(DMA_SG, mask);
+
+	/* Get control of DMA channel #0 */
+	priv->chan = dma_request_channel(mask, dma_filter, NULL);
+	if (!priv->chan) {
+		dev_err(&op->dev, "Unable to acquire DMA channel #0\n");
+		ret = -ENODEV;
+		goto out_free_priv;
+	}
+
+	/* Remap the registers for use */
+	priv->regs = of_iomap(of_node, 0);
+	if (!priv->regs) {
+		dev_err(&op->dev, "Unable to ioremap registers\n");
+		ret = -ENOMEM;
+		goto out_dma_release_channel;
+	}
+
+	/* Remap the IMMR for use */
+	priv->immr = ioremap(get_immrbase(), 0x100000);
+	if (!priv->immr) {
+		dev_err(&op->dev, "Unable to ioremap IMMR\n");
+		ret = -ENOMEM;
+		goto out_unmap_regs;
+	}
+
+	/*
+	 * Check that external DMA is configured
+	 *
+	 * U-Boot does this for us, but we should check it and bail out if
+	 * there is a problem. Failing to have this register setup correctly
+	 * will cause the DMA controller to transfer a single cacheline
+	 * worth of data, then wedge itself.
+	 */
+	if ((ioread32be(priv->immr + 0x114) & 0xE00) != 0xE00) {
+		dev_err(&op->dev, "External DMA control not configured\n");
+		ret = -ENODEV;
+		goto out_unmap_immr;
+	}
+
+	/*
+	 * Check the CTL-CPLD version
+	 *
+	 * This driver uses the CTL-CPLD DATA-FPGA power sequencer, and we
+	 * don't want to run on any version of the CTL-CPLD that does not use
+	 * a compatible register layout.
+	 *
+	 * v2: changed register layout, added power sequencer
+	 * v3: added glitch filter on the i2c overcurrent/overtemp outputs
+	 */
+	ver = ioread8(priv->regs + CTL_CPLD_VERSION);
+	if (ver != 0x02 && ver != 0x03) {
+		dev_err(&op->dev, "CTL-CPLD is not version 0x02 or 0x03!\n");
+		ret = -ENODEV;
+		goto out_unmap_immr;
+	}
+
+	/* Set the exact size that the firmware image should be */
+	ver = ioread32be(priv->regs + SYS_REG_VERSION);
+	priv->fw_size = (ver & (1 << 18)) ? FW_SIZE_EP2S130 : FW_SIZE_EP2S90;
+
+	/* Find the correct IRQ number */
+	priv->irq = irq_of_parse_and_map(of_node, 0);
+	if (priv->irq == NO_IRQ) {
+		dev_err(&op->dev, "Unable to find IRQ line\n");
+		ret = -ENODEV;
+		goto out_unmap_immr;
+	}
+
+	/* Request the IRQ */
+	ret = request_irq(priv->irq, fpga_irq, IRQF_SHARED, drv_name, priv);
+	if (ret) {
+		dev_err(&op->dev, "Unable to request IRQ %d\n", priv->irq);
+		ret = -ENODEV;
+		goto out_irq_dispose_mapping;
+	}
+
+	/* Reset and stop the FPGA's, just in case */
+	fpga_do_stop(priv);
+
+	/* Register the miscdevice */
+	ret = misc_register(&priv->miscdev);
+	if (ret) {
+		dev_err(&op->dev, "Unable to register miscdevice\n");
+		goto out_free_irq;
+	}
+
+	/* Create the sysfs files */
+	this_device = priv->miscdev.this_device;
+	dev_set_drvdata(this_device, priv);
+	ret = sysfs_create_group(&this_device->kobj, &fpga_attr_group);
+	if (ret) {
+		dev_err(&op->dev, "Unable to create sysfs files\n");
+		goto out_misc_deregister;
+	}
+
+	dev_info(priv->dev, "CARMA FPGA Programmer: %s rev%s with %s FPGAs\n",
+			(ver & (1 << 17)) ? "Correlator" : "Digitizer",
+			(ver & (1 << 16)) ? "B" : "A",
+			(ver & (1 << 18)) ? "EP2S130" : "EP2S90");
+
+	return 0;
+
+out_misc_deregister:
+	misc_deregister(&priv->miscdev);
+out_free_irq:
+	free_irq(priv->irq, priv);
+out_irq_dispose_mapping:
+	irq_dispose_mapping(priv->irq);
+out_unmap_immr:
+	iounmap(priv->immr);
+out_unmap_regs:
+	iounmap(priv->regs);
+out_dma_release_channel:
+	dma_release_channel(priv->chan);
+out_free_priv:
+	kref_put(&priv->ref, fpga_dev_remove);
+out_return:
+	return ret;
+}
+
+static struct of_device_id fpga_of_match[] = {
+	{ .compatible = "carma,fpga-programmer", },
+	{},
+};
+
+static struct of_platform_driver fpga_of_driver = {
+	.probe		= fpga_of_probe,
+	.remove		= fpga_of_remove,
+	.driver		= {
+		.name		= drv_name,
+		.of_match_table	= fpga_of_match,
+		.owner		= THIS_MODULE,
+	},
+};
+
+/*
+ * Module Init / Exit
+ */
+
+static int __init fpga_init(void)
+{
+	led_trigger_register_simple("fpga", &ledtrig_fpga);
+	return of_register_platform_driver(&fpga_of_driver);
+}
+
+static void __exit fpga_exit(void)
+{
+	of_unregister_platform_driver(&fpga_of_driver);
+	led_trigger_unregister_simple(ledtrig_fpga);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("CARMA Board DATA-FPGA Programmer");
+MODULE_LICENSE("GPL");
+
+module_init(fpga_init);
+module_exit(fpga_exit);
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
new file mode 100644
index 00000000000..3965821fef1
--- /dev/null
+++ b/drivers/misc/carma/carma-fpga.c
@@ -0,0 +1,1433 @@
+/*
+ * CARMA DATA-FPGA Access Driver
+ *
+ * Copyright (c) 2009-2011 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * FPGA Memory Dump Format
+ *
+ * FPGA #0 control registers (32 x 32-bit words)
+ * FPGA #1 control registers (32 x 32-bit words)
+ * FPGA #2 control registers (32 x 32-bit words)
+ * FPGA #3 control registers (32 x 32-bit words)
+ * SYSFPGA control registers (32 x 32-bit words)
+ * FPGA #0 correlation array (NUM_CORL0 correlation blocks)
+ * FPGA #1 correlation array (NUM_CORL1 correlation blocks)
+ * FPGA #2 correlation array (NUM_CORL2 correlation blocks)
+ * FPGA #3 correlation array (NUM_CORL3 correlation blocks)
+ *
+ * Each correlation array consists of:
+ *
+ * Correlation Data      (2 x NUM_LAGSn x 32-bit words)
+ * Pipeline Metadata     (2 x NUM_METAn x 32-bit words)
+ * Quantization Counters (2 x NUM_QCNTn x 32-bit words)
+ *
+ * The NUM_CORLn, NUM_LAGSn, NUM_METAn, and NUM_QCNTn values come from
+ * the FPGA configuration registers. They do not change once the FPGA's
+ * have been programmed, they only change on re-programming.
+ */
+
+/*
+ * Basic Description:
+ *
+ * This driver is used to capture correlation spectra off of the four data
+ * processing FPGAs. The FPGAs are often reprogrammed at runtime, therefore
+ * this driver supports dynamic enable/disable of capture while the device
+ * remains open.
+ *
+ * The nominal capture rate is 64Hz (every 15.625ms). To facilitate this fast
+ * capture rate, all buffers are pre-allocated to avoid any potentially long
+ * running memory allocations while capturing.
+ *
+ * There are two lists and one pointer which are used to keep track of the
+ * different states of data buffers.
+ *
+ * 1) free list
+ * This list holds all empty data buffers which are ready to receive data.
+ *
+ * 2) inflight pointer
+ * This pointer holds the currently inflight data buffer. This buffer is having
+ * data copied into it by the DMA engine.
+ *
+ * 3) used list
+ * This list holds data buffers which have been filled, and are waiting to be
+ * read by userspace.
+ *
+ * All buffers start life on the free list, then move successively to the
+ * inflight pointer, and then to the used list. After they have been read by
+ * userspace, they are moved back to the free list. The cycle repeats as long
+ * as necessary.
+ *
+ * It should be noted that all buffers are mapped and ready for DMA when they
+ * are on any of the three lists. They are only unmapped when they are in the
+ * process of being read by userspace.
+ */
+
+/*
+ * Notes on the IRQ masking scheme:
+ *
+ * The IRQ masking scheme here is different than most other hardware. The only
+ * way for the DATA-FPGAs to detect if the kernel has taken too long to copy
+ * the data is if the status registers are not cleared before the next
+ * correlation data dump is ready.
+ *
+ * The interrupt line is connected to the status registers, such that when they
+ * are cleared, the interrupt is de-asserted. Therein lies our problem. We need
+ * to schedule a long-running DMA operation and return from the interrupt
+ * handler quickly, but we cannot clear the status registers.
+ *
+ * To handle this, the system controller FPGA has the capability to connect the
+ * interrupt line to a user-controlled GPIO pin. This pin is driven high
+ * (unasserted) and left that way. To mask the interrupt, we change the
+ * interrupt source to the GPIO pin. Tada, we hid the interrupt. :)
+ */
+
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/seq_file.h>
+#include <linux/highmem.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+#include <linux/io.h>
+
+#include <media/videobuf-dma-sg.h>
+
+/* system controller registers */
+#define SYS_IRQ_SOURCE_CTL	0x24
+#define SYS_IRQ_OUTPUT_EN	0x28
+#define SYS_IRQ_OUTPUT_DATA	0x2C
+#define SYS_IRQ_INPUT_DATA	0x30
+#define SYS_FPGA_CONFIG_STATUS	0x44
+
+/* GPIO IRQ line assignment */
+#define IRQ_CORL_DONE		0x10
+
+/* FPGA registers */
+#define MMAP_REG_VERSION	0x00
+#define MMAP_REG_CORL_CONF1	0x08
+#define MMAP_REG_CORL_CONF2	0x0C
+#define MMAP_REG_STATUS		0x48
+
+#define SYS_FPGA_BLOCK		0xF0000000
+
+#define DATA_FPGA_START		0x400000
+#define DATA_FPGA_SIZE		0x80000
+
+static const char drv_name[] = "carma-fpga";
+
+#define NUM_FPGA	4
+
+#define MIN_DATA_BUFS	8
+#define MAX_DATA_BUFS	64
+
+struct fpga_info {
+	unsigned int num_lag_ram;
+	unsigned int blk_size;
+};
+
+struct data_buf {
+	struct list_head entry;
+	struct videobuf_dmabuf vb;
+	size_t size;
+};
+
+struct fpga_device {
+	/* character device */
+	struct miscdevice miscdev;
+	struct device *dev;
+	struct mutex mutex;
+
+	/* reference count */
+	struct kref ref;
+
+	/* FPGA registers and information */
+	struct fpga_info info[NUM_FPGA];
+	void __iomem *regs;
+	int irq;
+
+	/* FPGA Physical Address/Size Information */
+	resource_size_t phys_addr;
+	size_t phys_size;
+
+	/* DMA structures */
+	struct sg_table corl_table;
+	unsigned int corl_nents;
+	struct dma_chan *chan;
+
+	/* Protection for all members below */
+	spinlock_t lock;
+
+	/* Device enable/disable flag */
+	bool enabled;
+
+	/* Correlation data buffers */
+	wait_queue_head_t wait;
+	struct list_head free;
+	struct list_head used;
+	struct data_buf *inflight;
+
+	/* Information about data buffers */
+	unsigned int num_dropped;
+	unsigned int num_buffers;
+	size_t bufsize;
+	struct dentry *dbg_entry;
+};
+
+struct fpga_reader {
+	struct fpga_device *priv;
+	struct data_buf *buf;
+	off_t buf_start;
+};
+
+static void fpga_device_release(struct kref *ref)
+{
+	struct fpga_device *priv = container_of(ref, struct fpga_device, ref);
+
+	/* the last reader has exited, cleanup the last bits */
+	mutex_destroy(&priv->mutex);
+	kfree(priv);
+}
+
+/*
+ * Data Buffer Allocation Helpers
+ */
+
+/**
+ * data_free_buffer() - free a single data buffer and all allocated memory
+ * @buf: the buffer to free
+ *
+ * This will free all of the pages allocated to the given data buffer, and
+ * then free the structure itself
+ */
+static void data_free_buffer(struct data_buf *buf)
+{
+	/* It is ok to free a NULL buffer */
+	if (!buf)
+		return;
+
+	/* free all memory */
+	videobuf_dma_free(&buf->vb);
+	kfree(buf);
+}
+
+/**
+ * data_alloc_buffer() - allocate and fill a data buffer with pages
+ * @bytes: the number of bytes required
+ *
+ * This allocates all space needed for a data buffer. It must be mapped before
+ * use in a DMA transaction using videobuf_dma_map().
+ *
+ * Returns NULL on failure
+ */
+static struct data_buf *data_alloc_buffer(const size_t bytes)
+{
+	unsigned int nr_pages;
+	struct data_buf *buf;
+	int ret;
+
+	/* calculate the number of pages necessary */
+	nr_pages = DIV_ROUND_UP(bytes, PAGE_SIZE);
+
+	/* allocate the buffer structure */
+	buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		goto out_return;
+
+	/* initialize internal fields */
+	INIT_LIST_HEAD(&buf->entry);
+	buf->size = bytes;
+
+	/* allocate the videobuf */
+	videobuf_dma_init(&buf->vb);
+	ret = videobuf_dma_init_kernel(&buf->vb, DMA_FROM_DEVICE, nr_pages);
+	if (ret)
+		goto out_free_buf;
+
+	return buf;
+
+out_free_buf:
+	kfree(buf);
+out_return:
+	return NULL;
+}
+
+/**
+ * data_free_buffers() - free all allocated buffers
+ * @priv: the driver's private data structure
+ *
+ * Free all buffers allocated by the driver (except those currently in the
+ * process of being read by userspace).
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user
+ */
+static void data_free_buffers(struct fpga_device *priv)
+{
+	struct data_buf *buf, *tmp;
+
+	/* the device should be stopped, no DMA in progress */
+	BUG_ON(priv->inflight != NULL);
+
+	list_for_each_entry_safe(buf, tmp, &priv->free, entry) {
+		list_del_init(&buf->entry);
+		videobuf_dma_unmap(priv->dev, &buf->vb);
+		data_free_buffer(buf);
+	}
+
+	list_for_each_entry_safe(buf, tmp, &priv->used, entry) {
+		list_del_init(&buf->entry);
+		videobuf_dma_unmap(priv->dev, &buf->vb);
+		data_free_buffer(buf);
+	}
+
+	priv->num_buffers = 0;
+	priv->bufsize = 0;
+}
+
+/**
+ * data_alloc_buffers() - allocate 1 seconds worth of data buffers
+ * @priv: the driver's private data structure
+ *
+ * Allocate enough buffers for a whole second worth of data
+ *
+ * This routine will attempt to degrade nicely by succeeding even if a full
+ * second worth of data buffers could not be allocated, as long as a minimum
+ * number were allocated. In this case, it will print a message to the kernel
+ * log.
+ *
+ * The device must not be modifying any lists when this is called.
+ *
+ * CONTEXT: user
+ * LOCKING: must hold dev->mutex
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_alloc_buffers(struct fpga_device *priv)
+{
+	struct data_buf *buf;
+	int i, ret;
+
+	for (i = 0; i < MAX_DATA_BUFS; i++) {
+
+		/* allocate a buffer */
+		buf = data_alloc_buffer(priv->bufsize);
+		if (!buf)
+			break;
+
+		/* map it for DMA */
+		ret = videobuf_dma_map(priv->dev, &buf->vb);
+		if (ret) {
+			data_free_buffer(buf);
+			break;
+		}
+
+		/* add it to the list of free buffers */
+		list_add_tail(&buf->entry, &priv->free);
+		priv->num_buffers++;
+	}
+
+	/* Make sure we allocated the minimum required number of buffers */
+	if (priv->num_buffers < MIN_DATA_BUFS) {
+		dev_err(priv->dev, "Unable to allocate enough data buffers\n");
+		data_free_buffers(priv);
+		return -ENOMEM;
+	}
+
+	/* Warn if we are running in a degraded state, but do not fail */
+	if (priv->num_buffers < MAX_DATA_BUFS) {
+		dev_warn(priv->dev,
+			 "Unable to allocate %d buffers, using %d buffers instead\n",
+			 MAX_DATA_BUFS, i);
+	}
+
+	return 0;
+}
+
+/*
+ * DMA Operations Helpers
+ */
+
+/**
+ * fpga_start_addr() - get the physical address a DATA-FPGA
+ * @priv: the driver's private data structure
+ * @fpga: the DATA-FPGA number (zero based)
+ */
+static dma_addr_t fpga_start_addr(struct fpga_device *priv, unsigned int fpga)
+{
+	return priv->phys_addr + 0x400000 + (0x80000 * fpga);
+}
+
+/**
+ * fpga_block_addr() - get the physical address of a correlation data block
+ * @priv: the driver's private data structure
+ * @fpga: the DATA-FPGA number (zero based)
+ * @blknum: the correlation block number (zero based)
+ */
+static dma_addr_t fpga_block_addr(struct fpga_device *priv, unsigned int fpga,
+				  unsigned int blknum)
+{
+	return fpga_start_addr(priv, fpga) + (0x10000 * (1 + blknum));
+}
+
+#define REG_BLOCK_SIZE	(32 * 4)
+
+/**
+ * data_setup_corl_table() - create the scatterlist for correlation dumps
+ * @priv: the driver's private data structure
+ *
+ * Create the scatterlist for transferring a correlation dump from the
+ * DATA FPGAs. This structure will be reused for each buffer than needs
+ * to be filled with correlation data.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_setup_corl_table(struct fpga_device *priv)
+{
+	struct sg_table *table = &priv->corl_table;
+	struct scatterlist *sg;
+	struct fpga_info *info;
+	int i, j, ret;
+
+	/* Calculate the number of entries needed */
+	priv->corl_nents = (1 + NUM_FPGA) * REG_BLOCK_SIZE;
+	for (i = 0; i < NUM_FPGA; i++)
+		priv->corl_nents += priv->info[i].num_lag_ram;
+
+	/* Allocate the scatterlist table */
+	ret = sg_alloc_table(table, priv->corl_nents, GFP_KERNEL);
+	if (ret) {
+		dev_err(priv->dev, "unable to allocate DMA table\n");
+		return ret;
+	}
+
+	/* Add the DATA FPGA registers to the scatterlist */
+	sg = table->sgl;
+	for (i = 0; i < NUM_FPGA; i++) {
+		sg_dma_address(sg) = fpga_start_addr(priv, i);
+		sg_dma_len(sg) = REG_BLOCK_SIZE;
+		sg = sg_next(sg);
+	}
+
+	/* Add the SYS-FPGA registers to the scatterlist */
+	sg_dma_address(sg) = SYS_FPGA_BLOCK;
+	sg_dma_len(sg) = REG_BLOCK_SIZE;
+	sg = sg_next(sg);
+
+	/* Add the FPGA correlation data blocks to the scatterlist */
+	for (i = 0; i < NUM_FPGA; i++) {
+		info = &priv->info[i];
+		for (j = 0; j < info->num_lag_ram; j++) {
+			sg_dma_address(sg) = fpga_block_addr(priv, i, j);
+			sg_dma_len(sg) = info->blk_size;
+			sg = sg_next(sg);
+		}
+	}
+
+	/*
+	 * All physical addresses and lengths are present in the structure
+	 * now. It can be reused for every FPGA DATA interrupt
+	 */
+	return 0;
+}
+
+/*
+ * FPGA Register Access Helpers
+ */
+
+static void fpga_write_reg(struct fpga_device *priv, unsigned int fpga,
+			   unsigned int reg, u32 val)
+{
+	const int fpga_start = DATA_FPGA_START + (fpga * DATA_FPGA_SIZE);
+	iowrite32be(val, priv->regs + fpga_start + reg);
+}
+
+static u32 fpga_read_reg(struct fpga_device *priv, unsigned int fpga,
+			 unsigned int reg)
+{
+	const int fpga_start = DATA_FPGA_START + (fpga * DATA_FPGA_SIZE);
+	return ioread32be(priv->regs + fpga_start + reg);
+}
+
+/**
+ * data_calculate_bufsize() - calculate the data buffer size required
+ * @priv: the driver's private data structure
+ *
+ * Calculate the total buffer size needed to hold a single block
+ * of correlation data
+ *
+ * CONTEXT: user
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_calculate_bufsize(struct fpga_device *priv)
+{
+	u32 num_corl, num_lags, num_meta, num_qcnt, num_pack;
+	u32 conf1, conf2, version;
+	u32 num_lag_ram, blk_size;
+	int i;
+
+	/* Each buffer starts with the 5 FPGA register areas */
+	priv->bufsize = (1 + NUM_FPGA) * REG_BLOCK_SIZE;
+
+	/* Read and store the configuration data for each FPGA */
+	for (i = 0; i < NUM_FPGA; i++) {
+		version = fpga_read_reg(priv, i, MMAP_REG_VERSION);
+		conf1 = fpga_read_reg(priv, i, MMAP_REG_CORL_CONF1);
+		conf2 = fpga_read_reg(priv, i, MMAP_REG_CORL_CONF2);
+
+		/* minor version 2 and later */
+		if ((version & 0x000000FF) >= 2) {
+			num_corl = (conf1 & 0x000000F0) >> 4;
+			num_pack = (conf1 & 0x00000F00) >> 8;
+			num_lags = (conf1 & 0x00FFF000) >> 12;
+			num_meta = (conf1 & 0x7F000000) >> 24;
+			num_qcnt = (conf2 & 0x00000FFF) >> 0;
+		} else {
+			num_corl = (conf1 & 0x000000F0) >> 4;
+			num_pack = 1; /* implied */
+			num_lags = (conf1 & 0x000FFF00) >> 8;
+			num_meta = (conf1 & 0x7FF00000) >> 20;
+			num_qcnt = (conf2 & 0x00000FFF) >> 0;
+		}
+
+		num_lag_ram = (num_corl + num_pack - 1) / num_pack;
+		blk_size = ((num_pack * num_lags) + num_meta + num_qcnt) * 8;
+
+		priv->info[i].num_lag_ram = num_lag_ram;
+		priv->info[i].blk_size = blk_size;
+		priv->bufsize += num_lag_ram * blk_size;
+
+		dev_dbg(priv->dev, "FPGA %d NUM_CORL: %d\n", i, num_corl);
+		dev_dbg(priv->dev, "FPGA %d NUM_PACK: %d\n", i, num_pack);
+		dev_dbg(priv->dev, "FPGA %d NUM_LAGS: %d\n", i, num_lags);
+		dev_dbg(priv->dev, "FPGA %d NUM_META: %d\n", i, num_meta);
+		dev_dbg(priv->dev, "FPGA %d NUM_QCNT: %d\n", i, num_qcnt);
+		dev_dbg(priv->dev, "FPGA %d BLK_SIZE: %d\n", i, blk_size);
+	}
+
+	dev_dbg(priv->dev, "TOTAL BUFFER SIZE: %zu bytes\n", priv->bufsize);
+	return 0;
+}
+
+/*
+ * Interrupt Handling
+ */
+
+/**
+ * data_disable_interrupts() - stop the device from generating interrupts
+ * @priv: the driver's private data structure
+ *
+ * Hide interrupts by switching to GPIO interrupt source
+ *
+ * LOCKING: must hold dev->lock
+ */
+static void data_disable_interrupts(struct fpga_device *priv)
+{
+	/* hide the interrupt by switching the IRQ driver to GPIO */
+	iowrite32be(0x2F, priv->regs + SYS_IRQ_SOURCE_CTL);
+}
+
+/**
+ * data_enable_interrupts() - allow the device to generate interrupts
+ * @priv: the driver's private data structure
+ *
+ * Unhide interrupts by switching to the FPGA interrupt source. At the
+ * same time, clear the DATA-FPGA status registers.
+ *
+ * LOCKING: must hold dev->lock
+ */
+static void data_enable_interrupts(struct fpga_device *priv)
+{
+	/* clear the actual FPGA corl_done interrupt */
+	fpga_write_reg(priv, 0, MMAP_REG_STATUS, 0x0);
+	fpga_write_reg(priv, 1, MMAP_REG_STATUS, 0x0);
+	fpga_write_reg(priv, 2, MMAP_REG_STATUS, 0x0);
+	fpga_write_reg(priv, 3, MMAP_REG_STATUS, 0x0);
+
+	/* flush the writes */
+	fpga_read_reg(priv, 0, MMAP_REG_STATUS);
+
+	/* switch back to the external interrupt source */
+	iowrite32be(0x3F, priv->regs + SYS_IRQ_SOURCE_CTL);
+}
+
+/**
+ * data_dma_cb() - DMAEngine callback for DMA completion
+ * @data: the driver's private data structure
+ *
+ * Complete a DMA transfer from the DATA-FPGA's
+ *
+ * This is called via the DMA callback mechanism, and will handle moving the
+ * completed DMA transaction to the used list, and then wake any processes
+ * waiting for new data
+ *
+ * CONTEXT: any, softirq expected
+ */
+static void data_dma_cb(void *data)
+{
+	struct fpga_device *priv = data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* If there is no inflight buffer, we've got a bug */
+	BUG_ON(priv->inflight == NULL);
+
+	/* Move the inflight buffer onto the used list */
+	list_move_tail(&priv->inflight->entry, &priv->used);
+	priv->inflight = NULL;
+
+	/* clear the FPGA status and re-enable interrupts */
+	data_enable_interrupts(priv);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/*
+	 * We've changed both the inflight and used lists, so we need
+	 * to wake up any processes that are blocking for those events
+	 */
+	wake_up(&priv->wait);
+}
+
+/**
+ * data_submit_dma() - prepare and submit the required DMA to fill a buffer
+ * @priv: the driver's private data structure
+ * @buf: the data buffer
+ *
+ * Prepare and submit the necessary DMA transactions to fill a correlation
+ * data buffer.
+ *
+ * LOCKING: must hold dev->lock
+ * CONTEXT: hardirq only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_submit_dma(struct fpga_device *priv, struct data_buf *buf)
+{
+	struct scatterlist *dst_sg, *src_sg;
+	unsigned int dst_nents, src_nents;
+	struct dma_chan *chan = priv->chan;
+	struct dma_async_tx_descriptor *tx;
+	dma_cookie_t cookie;
+	dma_addr_t dst, src;
+
+	dst_sg = buf->vb.sglist;
+	dst_nents = buf->vb.sglen;
+
+	src_sg = priv->corl_table.sgl;
+	src_nents = priv->corl_nents;
+
+	/*
+	 * All buffers passed to this function should be ready and mapped
+	 * for DMA already. Therefore, we don't need to do anything except
+	 * submit it to the Freescale DMA Engine for processing
+	 */
+
+	/* setup the scatterlist to scatterlist transfer */
+	tx = chan->device->device_prep_dma_sg(chan,
+					      dst_sg, dst_nents,
+					      src_sg, src_nents,
+					      0);
+	if (!tx) {
+		dev_err(priv->dev, "unable to prep scatterlist DMA\n");
+		return -ENOMEM;
+	}
+
+	/* submit the transaction to the DMA controller */
+	cookie = tx->tx_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(priv->dev, "unable to submit scatterlist DMA\n");
+		return -ENOMEM;
+	}
+
+	/* Prepare the re-read of the SYS-FPGA block */
+	dst = sg_dma_address(dst_sg) + (NUM_FPGA * REG_BLOCK_SIZE);
+	src = SYS_FPGA_BLOCK;
+	tx = chan->device->device_prep_dma_memcpy(chan, dst, src,
+						  REG_BLOCK_SIZE,
+						  DMA_PREP_INTERRUPT);
+	if (!tx) {
+		dev_err(priv->dev, "unable to prep SYS-FPGA DMA\n");
+		return -ENOMEM;
+	}
+
+	/* Setup the callback */
+	tx->callback = data_dma_cb;
+	tx->callback_param = priv;
+
+	/* submit the transaction to the DMA controller */
+	cookie = tx->tx_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(priv->dev, "unable to submit SYS-FPGA DMA\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+#define CORL_DONE	0x1
+#define CORL_ERR	0x2
+
+static irqreturn_t data_irq(int irq, void *dev_id)
+{
+	struct fpga_device *priv = dev_id;
+	bool submitted = false;
+	struct data_buf *buf;
+	u32 status;
+	int i;
+
+	/* detect spurious interrupts via FPGA status */
+	for (i = 0; i < 4; i++) {
+		status = fpga_read_reg(priv, i, MMAP_REG_STATUS);
+		if (!(status & (CORL_DONE | CORL_ERR))) {
+			dev_err(priv->dev, "spurious irq detected (FPGA)\n");
+			return IRQ_NONE;
+		}
+	}
+
+	/* detect spurious interrupts via raw IRQ pin readback */
+	status = ioread32be(priv->regs + SYS_IRQ_INPUT_DATA);
+	if (status & IRQ_CORL_DONE) {
+		dev_err(priv->dev, "spurious irq detected (IRQ)\n");
+		return IRQ_NONE;
+	}
+
+	spin_lock(&priv->lock);
+
+	/* hide the interrupt by switching the IRQ driver to GPIO */
+	data_disable_interrupts(priv);
+
+	/* If there are no free buffers, drop this data */
+	if (list_empty(&priv->free)) {
+		priv->num_dropped++;
+		goto out;
+	}
+
+	buf = list_first_entry(&priv->free, struct data_buf, entry);
+	list_del_init(&buf->entry);
+	BUG_ON(buf->size != priv->bufsize);
+
+	/* Submit a DMA transfer to get the correlation data */
+	if (data_submit_dma(priv, buf)) {
+		dev_err(priv->dev, "Unable to setup DMA transfer\n");
+		list_move_tail(&buf->entry, &priv->free);
+		goto out;
+	}
+
+	/* Save the buffer for the DMA callback */
+	priv->inflight = buf;
+	submitted = true;
+
+	/* Start the DMA Engine */
+	dma_async_memcpy_issue_pending(priv->chan);
+
+out:
+	/* If no DMA was submitted, re-enable interrupts */
+	if (!submitted)
+		data_enable_interrupts(priv);
+
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Realtime Device Enable Helpers
+ */
+
+/**
+ * data_device_enable() - enable the device for buffered dumping
+ * @priv: the driver's private data structure
+ *
+ * Enable the device for buffered dumping. Allocates buffers and hooks up
+ * the interrupt handler. When this finishes, data will come pouring in.
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user context only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_device_enable(struct fpga_device *priv)
+{
+	u32 val;
+	int ret;
+
+	/* multiple enables are safe: they do nothing */
+	if (priv->enabled)
+		return 0;
+
+	/* check that the FPGAs are programmed */
+	val = ioread32be(priv->regs + SYS_FPGA_CONFIG_STATUS);
+	if (!(val & (1 << 18))) {
+		dev_err(priv->dev, "DATA-FPGAs are not enabled\n");
+		return -ENODATA;
+	}
+
+	/* read the FPGAs to calculate the buffer size */
+	ret = data_calculate_bufsize(priv);
+	if (ret) {
+		dev_err(priv->dev, "unable to calculate buffer size\n");
+		goto out_error;
+	}
+
+	/* allocate the correlation data buffers */
+	ret = data_alloc_buffers(priv);
+	if (ret) {
+		dev_err(priv->dev, "unable to allocate buffers\n");
+		goto out_error;
+	}
+
+	/* setup the source scatterlist for dumping correlation data */
+	ret = data_setup_corl_table(priv);
+	if (ret) {
+		dev_err(priv->dev, "unable to setup correlation DMA table\n");
+		goto out_error;
+	}
+
+	/* hookup the irq handler */
+	ret = request_irq(priv->irq, data_irq, IRQF_SHARED, drv_name, priv);
+	if (ret) {
+		dev_err(priv->dev, "unable to request IRQ handler\n");
+		goto out_error;
+	}
+
+	/* switch to the external FPGA IRQ line */
+	data_enable_interrupts(priv);
+
+	/* success, we're enabled */
+	priv->enabled = true;
+	return 0;
+
+out_error:
+	sg_free_table(&priv->corl_table);
+	priv->corl_nents = 0;
+
+	data_free_buffers(priv);
+	return ret;
+}
+
+/**
+ * data_device_disable() - disable the device for buffered dumping
+ * @priv: the driver's private data structure
+ *
+ * Disable the device for buffered dumping. Stops new DMA transactions from
+ * being generated, waits for all outstanding DMA to complete, and then frees
+ * all buffers.
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_device_disable(struct fpga_device *priv)
+{
+	int ret;
+
+	/* allow multiple disable */
+	if (!priv->enabled)
+		return 0;
+
+	/* switch to the internal GPIO IRQ line */
+	data_disable_interrupts(priv);
+
+	/* unhook the irq handler */
+	free_irq(priv->irq, priv);
+
+	/*
+	 * wait for all outstanding DMA to complete
+	 *
+	 * Device interrupts are disabled, therefore another buffer cannot
+	 * be marked inflight.
+	 */
+	ret = wait_event_interruptible(priv->wait, priv->inflight == NULL);
+	if (ret)
+		return ret;
+
+	/* free the correlation table */
+	sg_free_table(&priv->corl_table);
+	priv->corl_nents = 0;
+
+	/*
+	 * We are taking the spinlock not to protect priv->enabled, but instead
+	 * to make sure that there are no readers in the process of altering
+	 * the free or used lists while we are setting this flag.
+	 */
+	spin_lock_irq(&priv->lock);
+	priv->enabled = false;
+	spin_unlock_irq(&priv->lock);
+
+	/* free all buffers: the free and used lists are not being changed */
+	data_free_buffers(priv);
+	return 0;
+}
+
+/*
+ * DEBUGFS Interface
+ */
+#ifdef CONFIG_DEBUG_FS
+
+/*
+ * Count the number of entries in the given list
+ */
+static unsigned int list_num_entries(struct list_head *list)
+{
+	struct list_head *entry;
+	unsigned int ret = 0;
+
+	list_for_each(entry, list)
+		ret++;
+
+	return ret;
+}
+
+static int data_debug_show(struct seq_file *f, void *offset)
+{
+	struct fpga_device *priv = f->private;
+	int ret;
+
+	/*
+	 * Lock the mutex first, so that we get an accurate value for enable
+	 * Lock the spinlock next, to get accurate list counts
+	 */
+	ret = mutex_lock_interruptible(&priv->mutex);
+	if (ret)
+		return ret;
+
+	spin_lock_irq(&priv->lock);
+
+	seq_printf(f, "enabled: %d\n", priv->enabled);
+	seq_printf(f, "bufsize: %d\n", priv->bufsize);
+	seq_printf(f, "num_buffers: %d\n", priv->num_buffers);
+	seq_printf(f, "num_free: %d\n", list_num_entries(&priv->free));
+	seq_printf(f, "inflight: %d\n", priv->inflight != NULL);
+	seq_printf(f, "num_used: %d\n", list_num_entries(&priv->used));
+	seq_printf(f, "num_dropped: %d\n", priv->num_dropped);
+
+	spin_unlock_irq(&priv->lock);
+	mutex_unlock(&priv->mutex);
+	return 0;
+}
+
+static int data_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, data_debug_show, inode->i_private);
+}
+
+static const struct file_operations data_debug_fops = {
+	.owner		= THIS_MODULE,
+	.open		= data_debug_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int data_debugfs_init(struct fpga_device *priv)
+{
+	priv->dbg_entry = debugfs_create_file(drv_name, S_IRUGO, NULL, priv,
+					      &data_debug_fops);
+	if (IS_ERR(priv->dbg_entry))
+		return PTR_ERR(priv->dbg_entry);
+
+	return 0;
+}
+
+static void data_debugfs_exit(struct fpga_device *priv)
+{
+	debugfs_remove(priv->dbg_entry);
+}
+
+#else
+
+static inline int data_debugfs_init(struct fpga_device *priv)
+{
+	return 0;
+}
+
+static inline void data_debugfs_exit(struct fpga_device *priv)
+{
+}
+
+#endif	/* CONFIG_DEBUG_FS */
+
+/*
+ * SYSFS Attributes
+ */
+
+static ssize_t data_en_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct fpga_device *priv = dev_get_drvdata(dev);
+	return snprintf(buf, PAGE_SIZE, "%u\n", priv->enabled);
+}
+
+static ssize_t data_en_set(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct fpga_device *priv = dev_get_drvdata(dev);
+	unsigned long enable;
+	int ret;
+
+	ret = strict_strtoul(buf, 0, &enable);
+	if (ret) {
+		dev_err(priv->dev, "unable to parse enable input\n");
+		return -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&priv->mutex);
+	if (ret)
+		return ret;
+
+	if (enable)
+		ret = data_device_enable(priv);
+	else
+		ret = data_device_disable(priv);
+
+	if (ret) {
+		dev_err(priv->dev, "device %s failed\n",
+			enable ? "enable" : "disable");
+		count = ret;
+		goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&priv->mutex);
+	return count;
+}
+
+static DEVICE_ATTR(enable, S_IWUSR | S_IRUGO, data_en_show, data_en_set);
+
+static struct attribute *data_sysfs_attrs[] = {
+	&dev_attr_enable.attr,
+	NULL,
+};
+
+static const struct attribute_group rt_sysfs_attr_group = {
+	.attrs = data_sysfs_attrs,
+};
+
+/*
+ * FPGA Realtime Data Character Device
+ */
+
+static int data_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * The miscdevice layer puts our struct miscdevice into the
+	 * filp->private_data field. We use this to find our private
+	 * data and then overwrite it with our own private structure.
+	 */
+	struct fpga_device *priv = container_of(filp->private_data,
+						struct fpga_device, miscdev);
+	struct fpga_reader *reader;
+	int ret;
+
+	/* allocate private data */
+	reader = kzalloc(sizeof(*reader), GFP_KERNEL);
+	if (!reader)
+		return -ENOMEM;
+
+	reader->priv = priv;
+	reader->buf = NULL;
+
+	filp->private_data = reader;
+	ret = nonseekable_open(inode, filp);
+	if (ret) {
+		dev_err(priv->dev, "nonseekable-open failed\n");
+		kfree(reader);
+		return ret;
+	}
+
+	/*
+	 * success, increase the reference count of the private data structure
+	 * so that it doesn't disappear if the device is unbound
+	 */
+	kref_get(&priv->ref);
+	return 0;
+}
+
+static int data_release(struct inode *inode, struct file *filp)
+{
+	struct fpga_reader *reader = filp->private_data;
+	struct fpga_device *priv = reader->priv;
+
+	/* free the per-reader structure */
+	data_free_buffer(reader->buf);
+	kfree(reader);
+	filp->private_data = NULL;
+
+	/* decrement our reference count to the private data */
+	kref_put(&priv->ref, fpga_device_release);
+	return 0;
+}
+
+static ssize_t data_read(struct file *filp, char __user *ubuf, size_t count,
+			 loff_t *f_pos)
+{
+	struct fpga_reader *reader = filp->private_data;
+	struct fpga_device *priv = reader->priv;
+	struct list_head *used = &priv->used;
+	struct data_buf *dbuf;
+	size_t avail;
+	void *data;
+	int ret;
+
+	/* check if we already have a partial buffer */
+	if (reader->buf) {
+		dbuf = reader->buf;
+		goto have_buffer;
+	}
+
+	spin_lock_irq(&priv->lock);
+
+	/* Block until there is at least one buffer on the used list */
+	while (list_empty(used)) {
+		spin_unlock_irq(&priv->lock);
+
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		ret = wait_event_interruptible(priv->wait, !list_empty(used));
+		if (ret)
+			return ret;
+
+		spin_lock_irq(&priv->lock);
+	}
+
+	/* Grab the first buffer off of the used list */
+	dbuf = list_first_entry(used, struct data_buf, entry);
+	list_del_init(&dbuf->entry);
+
+	spin_unlock_irq(&priv->lock);
+
+	/* Buffers are always mapped: unmap it */
+	videobuf_dma_unmap(priv->dev, &dbuf->vb);
+
+	/* save the buffer for later */
+	reader->buf = dbuf;
+	reader->buf_start = 0;
+
+have_buffer:
+	/* Get the number of bytes available */
+	avail = dbuf->size - reader->buf_start;
+	data = dbuf->vb.vaddr + reader->buf_start;
+
+	/* Get the number of bytes we can transfer */
+	count = min(count, avail);
+
+	/* Copy the data to the userspace buffer */
+	if (copy_to_user(ubuf, data, count))
+		return -EFAULT;
+
+	/* Update the amount of available space */
+	avail -= count;
+
+	/*
+	 * If there is still some data available, save the buffer for the
+	 * next userspace call to read() and return
+	 */
+	if (avail > 0) {
+		reader->buf_start += count;
+		reader->buf = dbuf;
+		return count;
+	}
+
+	/*
+	 * Get the buffer ready to be reused for DMA
+	 *
+	 * If it fails, we pretend that the read never happed and return
+	 * -EFAULT to userspace. The read will be retried.
+	 */
+	ret = videobuf_dma_map(priv->dev, &dbuf->vb);
+	if (ret) {
+		dev_err(priv->dev, "unable to remap buffer for DMA\n");
+		return -EFAULT;
+	}
+
+	/* Lock against concurrent enable/disable */
+	spin_lock_irq(&priv->lock);
+
+	/* the reader is finished with this buffer */
+	reader->buf = NULL;
+
+	/*
+	 * One of two things has happened, the device is disabled, or the
+	 * device has been reconfigured underneath us. In either case, we
+	 * should just throw away the buffer.
+	 */
+	if (!priv->enabled || dbuf->size != priv->bufsize) {
+		videobuf_dma_unmap(priv->dev, &dbuf->vb);
+		data_free_buffer(dbuf);
+		goto out_unlock;
+	}
+
+	/* The buffer is safe to reuse, so add it back to the free list */
+	list_add_tail(&dbuf->entry, &priv->free);
+
+out_unlock:
+	spin_unlock_irq(&priv->lock);
+	return count;
+}
+
+static unsigned int data_poll(struct file *filp, struct poll_table_struct *tbl)
+{
+	struct fpga_reader *reader = filp->private_data;
+	struct fpga_device *priv = reader->priv;
+	unsigned int mask = 0;
+
+	poll_wait(filp, &priv->wait, tbl);
+
+	if (!list_empty(&priv->used))
+		mask |= POLLIN | POLLRDNORM;
+
+	return mask;
+}
+
+static int data_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct fpga_reader *reader = filp->private_data;
+	struct fpga_device *priv = reader->priv;
+	unsigned long offset, vsize, psize, addr;
+
+	/* VMA properties */
+	offset = vma->vm_pgoff << PAGE_SHIFT;
+	vsize = vma->vm_end - vma->vm_start;
+	psize = priv->phys_size - offset;
+	addr = (priv->phys_addr + offset) >> PAGE_SHIFT;
+
+	/* Check against the FPGA region's physical memory size */
+	if (vsize > psize) {
+		dev_err(priv->dev, "requested mmap mapping too large\n");
+		return -EINVAL;
+	}
+
+	/* IO memory (stop cacheing) */
+	vma->vm_flags |= VM_IO | VM_RESERVED;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	return io_remap_pfn_range(vma, vma->vm_start, addr, vsize,
+				  vma->vm_page_prot);
+}
+
+static const struct file_operations data_fops = {
+	.owner		= THIS_MODULE,
+	.open		= data_open,
+	.release	= data_release,
+	.read		= data_read,
+	.poll		= data_poll,
+	.mmap		= data_mmap,
+	.llseek		= no_llseek,
+};
+
+/*
+ * OpenFirmware Device Subsystem
+ */
+
+static bool dma_filter(struct dma_chan *chan, void *data)
+{
+	/*
+	 * DMA Channel #0 is used for the FPGA Programmer, so ignore it
+	 *
+	 * This probably won't survive an unload/load cycle of the Freescale
+	 * DMAEngine driver, but that won't be a problem
+	 */
+	if (chan->chan_id == 0 && chan->device->dev_id == 0)
+		return false;
+
+	return true;
+}
+
+static int data_of_probe(struct platform_device *op,
+			 const struct of_device_id *match)
+{
+	struct device_node *of_node = op->dev.of_node;
+	struct device *this_device;
+	struct fpga_device *priv;
+	struct resource res;
+	dma_cap_mask_t mask;
+	int ret;
+
+	/* Allocate private data */
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&op->dev, "Unable to allocate device private data\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	dev_set_drvdata(&op->dev, priv);
+	priv->dev = &op->dev;
+	kref_init(&priv->ref);
+	mutex_init(&priv->mutex);
+
+	dev_set_drvdata(priv->dev, priv);
+	spin_lock_init(&priv->lock);
+	INIT_LIST_HEAD(&priv->free);
+	INIT_LIST_HEAD(&priv->used);
+	init_waitqueue_head(&priv->wait);
+
+	/* Setup the misc device */
+	priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+	priv->miscdev.name = drv_name;
+	priv->miscdev.fops = &data_fops;
+
+	/* Get the physical address of the FPGA registers */
+	ret = of_address_to_resource(of_node, 0, &res);
+	if (ret) {
+		dev_err(&op->dev, "Unable to find FPGA physical address\n");
+		ret = -ENODEV;
+		goto out_free_priv;
+	}
+
+	priv->phys_addr = res.start;
+	priv->phys_size = resource_size(&res);
+
+	/* ioremap the registers for use */
+	priv->regs = of_iomap(of_node, 0);
+	if (!priv->regs) {
+		dev_err(&op->dev, "Unable to ioremap registers\n");
+		ret = -ENOMEM;
+		goto out_free_priv;
+	}
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_MEMCPY, mask);
+	dma_cap_set(DMA_INTERRUPT, mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_cap_set(DMA_SG, mask);
+
+	/* Request a DMA channel */
+	priv->chan = dma_request_channel(mask, dma_filter, NULL);
+	if (!priv->chan) {
+		dev_err(&op->dev, "Unable to request DMA channel\n");
+		ret = -ENODEV;
+		goto out_unmap_regs;
+	}
+
+	/* Find the correct IRQ number */
+	priv->irq = irq_of_parse_and_map(of_node, 0);
+	if (priv->irq == NO_IRQ) {
+		dev_err(&op->dev, "Unable to find IRQ line\n");
+		ret = -ENODEV;
+		goto out_release_dma;
+	}
+
+	/* Drive the GPIO for FPGA IRQ high (no interrupt) */
+	iowrite32be(IRQ_CORL_DONE, priv->regs + SYS_IRQ_OUTPUT_DATA);
+
+	/* Register the miscdevice */
+	ret = misc_register(&priv->miscdev);
+	if (ret) {
+		dev_err(&op->dev, "Unable to register miscdevice\n");
+		goto out_irq_dispose_mapping;
+	}
+
+	/* Create the debugfs files */
+	ret = data_debugfs_init(priv);
+	if (ret) {
+		dev_err(&op->dev, "Unable to create debugfs files\n");
+		goto out_misc_deregister;
+	}
+
+	/* Create the sysfs files */
+	this_device = priv->miscdev.this_device;
+	dev_set_drvdata(this_device, priv);
+	ret = sysfs_create_group(&this_device->kobj, &rt_sysfs_attr_group);
+	if (ret) {
+		dev_err(&op->dev, "Unable to create sysfs files\n");
+		goto out_data_debugfs_exit;
+	}
+
+	dev_info(&op->dev, "CARMA FPGA Realtime Data Driver Loaded\n");
+	return 0;
+
+out_data_debugfs_exit:
+	data_debugfs_exit(priv);
+out_misc_deregister:
+	misc_deregister(&priv->miscdev);
+out_irq_dispose_mapping:
+	irq_dispose_mapping(priv->irq);
+out_release_dma:
+	dma_release_channel(priv->chan);
+out_unmap_regs:
+	iounmap(priv->regs);
+out_free_priv:
+	kref_put(&priv->ref, fpga_device_release);
+out_return:
+	return ret;
+}
+
+static int data_of_remove(struct platform_device *op)
+{
+	struct fpga_device *priv = dev_get_drvdata(&op->dev);
+	struct device *this_device = priv->miscdev.this_device;
+
+	/* remove all sysfs files, now the device cannot be re-enabled */
+	sysfs_remove_group(&this_device->kobj, &rt_sysfs_attr_group);
+
+	/* remove all debugfs files */
+	data_debugfs_exit(priv);
+
+	/* disable the device from generating data */
+	data_device_disable(priv);
+
+	/* remove the character device to stop new readers from appearing */
+	misc_deregister(&priv->miscdev);
+
+	/* cleanup everything not needed by readers */
+	irq_dispose_mapping(priv->irq);
+	dma_release_channel(priv->chan);
+	iounmap(priv->regs);
+
+	/* release our reference */
+	kref_put(&priv->ref, fpga_device_release);
+	return 0;
+}
+
+static struct of_device_id data_of_match[] = {
+	{ .compatible = "carma,carma-fpga", },
+	{},
+};
+
+static struct of_platform_driver data_of_driver = {
+	.probe		= data_of_probe,
+	.remove		= data_of_remove,
+	.driver		= {
+		.name		= drv_name,
+		.of_match_table	= data_of_match,
+		.owner		= THIS_MODULE,
+	},
+};
+
+/*
+ * Module Init / Exit
+ */
+
+static int __init data_init(void)
+{
+	return of_register_platform_driver(&data_of_driver);
+}
+
+static void __exit data_exit(void)
+{
+	of_unregister_platform_driver(&data_of_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("CARMA DATA-FPGA Access Driver");
+MODULE_LICENSE("GPL");
+
+module_init(data_init);
+module_exit(data_exit);
diff --git a/drivers/misc/ibmasm/remote.h b/drivers/misc/ibmasm/remote.h
index 72acf5af7a2..00dbf1d4373 100644
--- a/drivers/misc/ibmasm/remote.h
+++ b/drivers/misc/ibmasm/remote.h
@@ -20,7 +20,7 @@
  *
  * Author: Max Asböck <amax@us.ibm.com>
  *
- * Orignally written by Pete Reynolds
+ * Originally written by Pete Reynolds
  */
 
 #ifndef _IBMASM_REMOTE_H_
diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c
index 727af07f1fb..b1f4563be9a 100644
--- a/drivers/misc/iwmc3200top/main.c
+++ b/drivers/misc/iwmc3200top/main.c
@@ -268,7 +268,7 @@ static void iwmct_irq_read_worker(struct work_struct *ws)
 		LOG_INFO(priv, IRQ, "ACK barker arrived "
 				"- starting FW download\n");
 	} else { /* REBOOT barker */
-		LOG_INFO(priv, IRQ, "Recieved reboot barker: %x\n", barker);
+		LOG_INFO(priv, IRQ, "Received reboot barker: %x\n", barker);
 		priv->barker = barker;
 
 		if (barker & BARKER_DNLOAD_SYNC_MSK) {
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 27dc463097f..74f16f167b8 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -645,7 +645,7 @@ static int validate_simple_test(char *put_str)
 
 	while (*chk_str != '\0' && *put_str != '\0') {
 		/* If someone does a * to match the rest of the string, allow
-		 * it, or stop if the recieved string is complete.
+		 * it, or stop if the received string is complete.
 		 */
 		if (*put_str == '#' || *chk_str == '*')
 			return 0;
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
index 38657cdaf54..c4acac74725 100644
--- a/drivers/misc/sgi-gru/grufault.c
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -33,6 +33,7 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 #include <linux/security.h>
+#include <linux/prefetch.h>
 #include <asm/pgtable.h>
 #include "gru.h"
 #include "grutables.h"
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 20e4e9395b6..ecafa4ba238 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -348,15 +348,15 @@ static unsigned long gru_chiplet_cpu_to_mmr(int chiplet, int cpu, int *corep)
 
 static int gru_irq_count[GRU_CHIPLETS_PER_BLADE];
 
-static void gru_noop(unsigned int irq)
+static void gru_noop(struct irq_data *d)
 {
 }
 
 static struct irq_chip gru_chip[GRU_CHIPLETS_PER_BLADE] = {
 	[0 ... GRU_CHIPLETS_PER_BLADE - 1] {
-		.mask		= gru_noop,
-		.unmask		= gru_noop,
-		.ack		= gru_noop
+		.irq_mask	= gru_noop,
+		.irq_unmask	= gru_noop,
+		.irq_ack	= gru_noop
 	}
 };
 
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 34749ee88df..9e9bddaa95a 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -229,7 +229,7 @@ again:
 	bid = blade_id < 0 ? uv_numa_blade_id() : blade_id;
 	bs = gru_base[bid];
 
-	/* Handle the case where migration occured while waiting for the sema */
+	/* Handle the case where migration occurred while waiting for the sema */
 	down_read(&bs->bs_kgts_sema);
 	if (blade_id < 0 && bid != uv_numa_blade_id()) {
 		up_read(&bs->bs_kgts_sema);
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
index f8538bbd0bf..ae16c8cb4f3 100644
--- a/drivers/misc/sgi-gru/grumain.c
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -28,6 +28,7 @@
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/err.h>
+#include <linux/prefetch.h>
 #include <asm/uv/uv_hub.h>
 #include "gru.h"
 #include "grutables.h"
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 7a8b9068ea0..5c3ce245967 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -379,7 +379,7 @@ struct gru_thread_state {
 						   required for contest */
 	char			ts_cch_req_slice;/* CCH packet slice */
 	char			ts_blade;	/* If >= 0, migrate context if
-						   ref from diferent blade */
+						   ref from different blade */
 	char			ts_force_cch_reload;
 	char			ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
 							  allocated CB */
diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
index 2c8c3f39710..abb5de1afce 100644
--- a/drivers/misc/ti-st/Kconfig
+++ b/drivers/misc/ti-st/Kconfig
@@ -5,7 +5,7 @@
 menu "Texas Instruments shared transport line discipline"
 config TI_ST
 	tristate "Shared transport core driver"
-	depends on RFKILL
+	depends on NET && GPIOLIB
 	select FW_LOADER
 	help
 	  This enables the shared transport core driver for TI
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 486117f72c9..f91f82eabda 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -43,13 +43,15 @@ static void add_channel_to_table(struct st_data_s *st_gdata,
 	pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
 	/* list now has the channel id as index itself */
 	st_gdata->list[new_proto->chnl_id] = new_proto;
+	st_gdata->is_registered[new_proto->chnl_id] = true;
 }
 
 static void remove_channel_from_table(struct st_data_s *st_gdata,
 		struct st_proto_s *proto)
 {
 	pr_info("%s: id %d\n", __func__, proto->chnl_id);
-	st_gdata->list[proto->chnl_id] = NULL;
+/*	st_gdata->list[proto->chnl_id] = NULL; */
+	st_gdata->is_registered[proto->chnl_id] = false;
 }
 
 /*
@@ -104,7 +106,7 @@ void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
 
 	if (unlikely
 	    (st_gdata == NULL || st_gdata->rx_skb == NULL
-	     || st_gdata->list[chnl_id] == NULL)) {
+	     || st_gdata->is_registered[chnl_id] == false)) {
 		pr_err("chnl_id %d not registered, no data to send?",
 			   chnl_id);
 		kfree_skb(st_gdata->rx_skb);
@@ -141,14 +143,15 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 	unsigned char i = 0;
 	pr_info(" %s ", __func__);
 	for (i = 0; i < ST_MAX_CHANNELS; i++) {
-		if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
-			   st_gdata->list[i]->reg_complete_cb != NULL)) {
+		if (likely(st_gdata != NULL &&
+			st_gdata->is_registered[i] == true &&
+				st_gdata->list[i]->reg_complete_cb != NULL)) {
 			st_gdata->list[i]->reg_complete_cb
 				(st_gdata->list[i]->priv_data, err);
 			pr_info("protocol %d's cb sent %d\n", i, err);
 			if (err) { /* cleanup registered protocol */
 				st_gdata->protos_registered--;
-				st_gdata->list[i] = NULL;
+				st_gdata->is_registered[i] = false;
 			}
 		}
 	}
@@ -475,9 +478,9 @@ void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
 {
 	seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
 			st_gdata->protos_registered,
-			st_gdata->list[0x04] != NULL ? 'R' : 'U',
-			st_gdata->list[0x08] != NULL ? 'R' : 'U',
-			st_gdata->list[0x09] != NULL ? 'R' : 'U');
+			st_gdata->is_registered[0x04] == true ? 'R' : 'U',
+			st_gdata->is_registered[0x08] == true ? 'R' : 'U',
+			st_gdata->is_registered[0x09] == true ? 'R' : 'U');
 }
 
 /********************************************************************/
@@ -504,7 +507,7 @@ long st_register(struct st_proto_s *new_proto)
 		return -EPROTONOSUPPORT;
 	}
 
-	if (st_gdata->list[new_proto->chnl_id] != NULL) {
+	if (st_gdata->is_registered[new_proto->chnl_id] == true) {
 		pr_err("chnl_id %d already registered", new_proto->chnl_id);
 		return -EALREADY;
 	}
@@ -563,7 +566,7 @@ long st_register(struct st_proto_s *new_proto)
 		/* check for already registered once more,
 		 * since the above check is old
 		 */
-		if (st_gdata->list[new_proto->chnl_id] != NULL) {
+		if (st_gdata->is_registered[new_proto->chnl_id] == true) {
 			pr_err(" proto %d already registered ",
 				   new_proto->chnl_id);
 			return -EALREADY;
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 9ee4c788aa6..5da93ee6f6b 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -30,6 +30,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/sched.h>
+#include <linux/sysfs.h>
 #include <linux/tty.h>
 
 #include <linux/skbuff.h>
@@ -649,7 +650,7 @@ static int kim_probe(struct platform_device *pdev)
 		/* multiple devices could exist */
 		st_kim_devices[pdev->id] = pdev;
 	} else {
-		/* platform's sure about existance of 1 device */
+		/* platform's sure about existence of 1 device */
 		st_kim_devices[0] = pdev;
 	}
 
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index f5cedeccad4..abc1a63bcc5 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -292,7 +292,7 @@ static void mmc_test_free_mem(struct mmc_test_mem *mem)
 }
 
 /*
- * Allocate a lot of memory, preferrably max_sz but at least min_sz.  In case
+ * Allocate a lot of memory, preferably max_sz but at least min_sz.  In case
  * there isn't much memory do not exceed 1/16th total lowmem pages.  Also do
  * not exceed a maximum number of segments and try not to make segments much
  * bigger than maximum segment size.
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 63667a8f140..d6d62fd07ee 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -284,6 +284,7 @@ int mmc_add_card(struct mmc_card *card)
 		type = "SD-combo";
 		if (mmc_card_blockaddr(card))
 			type = "SDHC-combo";
+		break;
 	default:
 		type = "?";
 		break;
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 14e95f39a7b..772d0d0a541 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -538,7 +538,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 
 	/*
 	 * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF
-	 * bit.  This bit will be lost everytime after a reset or power off.
+	 * bit.  This bit will be lost every time after a reset or power off.
 	 */
 	if (card->ext_csd.enhanced_area_en) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 60842f878de..f3b22bf89cc 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -105,7 +105,7 @@ int mmc_go_idle(struct mmc_host *host)
 	 * that in case of hardware that won't pull up DAT3/nCS otherwise.
 	 *
 	 * SPI hosts ignore ios.chip_select; it's managed according to
-	 * rules that must accomodate non-MMC slaves which this layer
+	 * rules that must accommodate non-MMC slaves which this layer
 	 * won't even know about.
 	 */
 	if (!mmc_host_is_spi(host)) {
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index bb192f90e8e..b3001617e67 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -45,7 +45,7 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
 			struct sdio_func *func = card->sdio_func[i - 1];
 			if (!func) {
 				printk(KERN_WARNING "%s: pending IRQ for "
-					"non-existant function\n",
+					"non-existent function\n",
 					mmc_card_id(card));
 				ret = -EINVAL;
 			} else if (func->irq_handler) {
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 80bc9a5c25c..ea3888b65d5 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -127,7 +127,7 @@ struct atmel_mci_dma {
  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
  * interrupts must be disabled and @data_status updated with a
  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
  * bytes_xfered field of @data must be written. This is ensured by
  * using barriers.
@@ -1082,7 +1082,7 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
 	/*
 	 * Update the MMC clock rate if necessary. This may be
 	 * necessary if set_ios() is called when a different slot is
-	 * busy transfering data.
+	 * busy transferring data.
 	 */
 	if (host->need_clock_update) {
 		mci_writel(host, MR, host->mode_reg);
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 2f7fc0c5146..7c1e16aaf17 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -99,7 +99,7 @@
 #define r1b_timeout		(HZ * 3)
 
 /* One of the critical speed parameters is the amount of data which may
- * be transfered in one command. If this value is too low, the SD card
+ * be transferred in one command. If this value is too low, the SD card
  * controller has to do multiple partial block writes (argggh!). With
  * today (2008) SD cards there is little speed gain if we transfer more
  * than 64 KBytes at a time. So use this value until there is any indication
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 2e032f0e8cf..a6c32904014 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -832,7 +832,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 		return IRQ_HANDLED;
 	}
 
-	if (end_command)
+	if (end_command && host->cmd)
 		mmc_omap_cmd_done(host, host->cmd);
 	if (host->data != NULL) {
 		if (transfer_error)
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 1ccd4b256ce..a04f87d7ee3 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -874,7 +874,7 @@ static void finalize_request(struct s3cmci_host *host)
 	if (!mrq->data)
 		goto request_done;
 
-	/* Calulate the amout of bytes transfer if there was no error */
+	/* Calculate the amout of bytes transfer if there was no error */
 	if (mrq->data->error == 0) {
 		mrq->data->bytes_xfered =
 			(mrq->data->blocks * mrq->data->blksz);
@@ -882,7 +882,7 @@ static void finalize_request(struct s3cmci_host *host)
 		mrq->data->bytes_xfered = 0;
 	}
 
-	/* If we had an error while transfering data we flush the
+	/* If we had an error while transferring data we flush the
 	 * DMA channel and the fifo to clear out any garbage. */
 	if (mrq->data->error != 0) {
 		if (s3cmci_host_usedma(host))
@@ -980,7 +980,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 
 	if ((data->blksz & 3) != 0) {
 		/* We cannot deal with unaligned blocks with more than
-		 * one block being transfered. */
+		 * one block being transferred. */
 
 		if (data->blocks > 1) {
 			pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c
index f9b611fc773..60e4186a434 100644
--- a/drivers/mmc/host/sdhci-of-core.c
+++ b/drivers/mmc/host/sdhci-of-core.c
@@ -124,8 +124,10 @@ static bool __devinit sdhci_of_wp_inverted(struct device_node *np)
 #endif
 }
 
+static const struct of_device_id sdhci_of_match[];
 static int __devinit sdhci_of_probe(struct platform_device *ofdev)
 {
+	const struct of_device_id *match;
 	struct device_node *np = ofdev->dev.of_node;
 	struct sdhci_of_data *sdhci_of_data;
 	struct sdhci_host *host;
@@ -134,9 +136,10 @@ static int __devinit sdhci_of_probe(struct platform_device *ofdev)
 	int size;
 	int ret;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(sdhci_of_match, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
-	sdhci_of_data = ofdev->dev.of_match->data;
+	sdhci_of_data = match->data;
 
 	if (!of_device_is_available(np))
 		return -ENODEV;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index a136be70634..f8b5f37007b 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -957,6 +957,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
 	host->ioaddr = pci_ioremap_bar(pdev, bar);
 	if (!host->ioaddr) {
 		dev_err(&pdev->dev, "failed to remap registers\n");
+		ret = -ENOMEM;
 		goto release;
 	}
 
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9e15f41f87b..5d20661bc35 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1334,6 +1334,13 @@ static void sdhci_tasklet_finish(unsigned long param)
 
 	host = (struct sdhci_host*)param;
 
+        /*
+         * If this tasklet gets rescheduled while running, it will
+         * be run again afterwards but without any active request.
+         */
+	if (!host->mrq)
+		return;
+
 	spin_lock_irqsave(&host->lock, flags);
 
 	del_timer(&host->timer);
@@ -1345,7 +1352,7 @@ static void sdhci_tasklet_finish(unsigned long param)
 	 * upon error conditions.
 	 */
 	if (!(host->flags & SDHCI_DEVICE_DEAD) &&
-		(mrq->cmd->error ||
+	    ((mrq->cmd && mrq->cmd->error) ||
 		 (mrq->data && (mrq->data->error ||
 		  (mrq->data->stop && mrq->data->stop->error))) ||
 		   (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 6ae8d2f00ec..710339a85c8 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -355,7 +355,7 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
 /*
  * This chip always returns (at least?) as much data as you ask for.
  * I'm unsure what happens if you ask for less than a block. This should be
- * looked into to ensure that a funny length read doesnt hose the controller.
+ * looked into to ensure that a funny length read doesn't hose the controller.
  */
 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
@@ -728,15 +728,15 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		tmio_mmc_set_clock(host, ios->clock);
 
 	/* Power sequence - OFF -> UP -> ON */
-	if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
+	if (ios->power_mode == MMC_POWER_UP) {
+		/* power up SD bus */
+		if (host->set_pwr)
+			host->set_pwr(host->pdev, 1);
+	} else if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
 		/* power down SD bus */
 		if (ios->power_mode == MMC_POWER_OFF && host->set_pwr)
 			host->set_pwr(host->pdev, 0);
 		tmio_mmc_clk_stop(host);
-	} else if (ios->power_mode == MMC_POWER_UP) {
-		/* power up SD bus */
-		if (host->set_pwr)
-			host->set_pwr(host->pdev, 1);
 	} else {
 		/* start bus clock */
 		tmio_mmc_clk_start(host);
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 7fca0a386ba..62e5a4d171e 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -484,7 +484,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
 
 	/*
 	 * Check that we aren't being called after the
-	 * entire buffer has been transfered.
+	 * entire buffer has been transferred.
 	 */
 	if (host->num_sg == 0)
 		return;
@@ -828,7 +828,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	/*
 	 * If this is a data transfer the request
 	 * will be finished after the data has
-	 * transfered.
+	 * transferred.
 	 */
 	if (cmd->data && !cmd->error) {
 		/*
@@ -904,7 +904,7 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			setup &= ~WBSD_DAT3_H;
 
 			/*
-			 * We cannot resume card detection immediatly
+			 * We cannot resume card detection immediately
 			 * because of capacitance and delays in the chip.
 			 */
 			mod_timer(&host->ignore_timer, jiffies + HZ / 100);
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 35c6a23b183..b1e3c26edd6 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -19,7 +19,7 @@ config MTD_JEDECPROBE
 	help
 	  This option enables JEDEC-style probing of flash chips which are not
 	  compatible with the Common Flash Interface, but will use the common
-	  CFI-targetted flash drivers for any chips which are identified which
+	  CFI-targeted flash drivers for any chips which are identified which
 	  are in fact compatible in all but the probe method. This actually
 	  covers most AMD/Fujitsu-compatible chips and also non-CFI
 	  Intel chips.
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 092aef11120..09cb7c8d93b 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1247,12 +1247,12 @@ static int inval_cache_and_wait_for_operation(
 			break;
 
 		if (chip->erase_suspended && chip_state == FL_ERASING)  {
-			/* Erase suspend occured while sleep: reset timeout */
+			/* Erase suspend occurred while sleep: reset timeout */
 			timeo = reset_timeo;
 			chip->erase_suspended = 0;
 		}
 		if (chip->write_suspended && chip_state == FL_WRITING)  {
-			/* Write suspend occured while sleep: reset timeout */
+			/* Write suspend occurred while sleep: reset timeout */
 			timeo = reset_timeo;
 			chip->write_suspended = 0;
 		}
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index f9a5331e944..0b49266840b 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -263,7 +263,7 @@ static void fixup_old_sst_eraseregion(struct mtd_info *mtd)
 	struct cfi_private *cfi = map->fldrv_priv;
 
 	/*
-	 * These flashes report two seperate eraseblock regions based on the
+	 * These flashes report two separate eraseblock regions based on the
 	 * sector_erase-size and block_erase-size, although they both operate on the
 	 * same memory. This is not allowed according to CFI, so we just pick the
 	 * sector_erase-size.
@@ -611,8 +611,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
  *
  * Note that anything more complicated than checking if no bits are toggling
  * (including checking DQ5 for an error status) is tricky to get working
- * correctly and is therefore not done	(particulary with interleaved chips
- * as each chip must be checked independantly of the others).
+ * correctly and is therefore not done	(particularly with interleaved chips
+ * as each chip must be checked independently of the others).
  */
 static int __xipram chip_ready(struct map_info *map, unsigned long addr)
 {
@@ -635,8 +635,8 @@ static int __xipram chip_ready(struct map_info *map, unsigned long addr)
  *
  * Note that anything more complicated than checking if no bits are toggling
  * (including checking DQ5 for an error status) is tricky to get working
- * correctly and is therefore not done	(particulary with interleaved chips
- * as each chip must be checked independantly of the others).
+ * correctly and is therefore not done	(particularly with interleaved chips
+ * as each chip must be checked independently of the others).
  *
  */
 static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected)
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 6ae3d111e1e..8e464054a63 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -1,6 +1,6 @@
 /*
  * Common Flash Interface support:
- *   Generic utility functions not dependant on command set
+ *   Generic utility functions not dependent on command set
  *
  * Copyright (C) 2002 Red Hat
  * Copyright (C) 2003 STMicroelectronics Limited
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 4e1be51cc12..ea832ea0e4a 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -2075,7 +2075,7 @@ static inline int jedec_match( uint32_t base,
 	}
 
 	/*
-	 * Make sure the ID's dissappear when the device is taken out of
+	 * Make sure the ID's disappear when the device is taken out of
 	 * ID mode.  The only time this should fail when it should succeed
 	 * is when the ID's are written as data to the same
 	 * addresses.  For this rare and unfortunate case the chip
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index f29a6f9df6e..97183c8c9e3 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -295,7 +295,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 	dev->mtd.owner = THIS_MODULE;
 
 	if (add_mtd_device(&dev->mtd)) {
-		/* Device didnt get added, so free the entry */
+		/* Device didn't get added, so free the entry */
 		goto devinit_err;
 	}
 	list_add(&dev->list, &blkmtd_device_list);
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 719b2915dc3..8b36fa77a19 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -90,7 +90,7 @@ static inline int DoC_WaitReady(void __iomem * docptr)
 	return ret;
 }
 
-/* For some reason the Millennium Plus seems to occassionally put itself
+/* For some reason the Millennium Plus seems to occasionally put itself
  * into reset mode. For me this happens randomly, with no pattern that I
  * can detect. M-systems suggest always check this on any block level
  * operation and setting to normal mode if in reset mode.
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index a99838bb2dc..37ef29a73ee 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -109,7 +109,7 @@ for(ci=(n)-1;ci >=0;ci--)\
    of the integer "alpha_to[i]" with a(0) being the LSB and a(m-1) the MSB. Thus for
    example the polynomial representation of @^5 would be given by the binary
    representation of the integer "alpha_to[5]".
-                   Similarily, index_of[] can be used as follows:
+                   Similarly, index_of[] can be used as follows:
         As above, let @ represent the primitive element of GF(2^m) that is
    the root of the primitive polynomial p(x). In order to find the power
    of @ (alpha) that has the polynomial representation
@@ -121,7 +121,7 @@ for(ci=(n)-1;ci >=0;ci--)\
    NOTE:
         The element alpha_to[2^m-1] = 0 always signifying that the
    representation of "@^infinity" = 0 is (0,0,0,...,0).
-        Similarily, the element index_of[0] = A0 always signifying
+        Similarly, the element index_of[0] = A0 always signifying
    that the power of alpha which has the polynomial representation
    (0,0,...,0) is "infinity".
 
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index caf604167f0..4b829f97d56 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -353,7 +353,7 @@ static inline int erase_block (__u32 offset)
    /* put the flash back into command mode */
    write32 (DATA_TO_FLASH (READ_ARRAY),offset);
 
-   /* was the erase successfull? */
+   /* was the erase successful? */
    if ((status & STATUS_ERASE_ERR))
 	 {
 		printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset);
@@ -508,7 +508,7 @@ static inline int write_dword (__u32 offset,__u32 x)
    /* put the flash back into command mode */
    write32 (DATA_TO_FLASH (READ_ARRAY),offset);
 
-   /* was the write successfull? */
+   /* was the write successful? */
    if ((status & STATUS_PGM_ERR) || read32 (offset) != x)
 	 {
 		printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset);
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index ef0aba0ce58..41b8cdcc64c 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -351,7 +351,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
  * Fixup routines for the V370PDC
  * PCI device ID 0x020011b0
  *
- * This function basicly kick starts the DRAM oboard the card and gets it
+ * This function basically kick starts the DRAM oboard the card and gets it
  * ready to be used.  Before this is done the device reads VERY erratic, so
  * much that it can crash the Linux 2.2.x series kernels when a user cat's
  * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL
@@ -540,7 +540,7 @@ static u32 fixup_pmc551(struct pci_dev *dev)
 
 	/*
 	 * Check to make certain the DEVSEL is set correctly, this device
-	 * has a tendancy to assert DEVSEL and TRDY when a write is performed
+	 * has a tendency to assert DEVSEL and TRDY when a write is performed
 	 * to the memory when memory is read-only
 	 */
 	if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) {
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index 04fdfcca93f..12679925b42 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -3,7 +3,7 @@
  * erase, lock/unlock support for LPDDR flash memories
  * (C) 2008 Korolev Alexey <akorolev@infradead.org>
  * (C) 2008 Vasiliy Leonenko <vasiliy.leonenko@gmail.com>
- * Many thanks to Roman Borisov for intial enabling
+ * Many thanks to Roman Borisov for initial enabling
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -171,7 +171,7 @@ static int wait_for_ready(struct map_info *map, struct flchip *chip,
 			mutex_lock(&chip->mutex);
 		}
 		if (chip->erase_suspended || chip->write_suspended)  {
-			/* Suspend has occured while sleep: reset timeout */
+			/* Suspend has occurred while sleep: reset timeout */
 			timeo = reset_timeo;
 			chip->erase_suspended = chip->write_suspended = 0;
 		}
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 44b1f46458c..5069111c81c 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -260,6 +260,13 @@ config MTD_BCM963XX
 	  Support for parsing CFE image tag and creating MTD partitions on
 	  Broadcom BCM63xx boards.
 
+config MTD_LANTIQ
+	tristate "Lantiq SoC NOR support"
+	depends on LANTIQ
+	select MTD_PARTITIONS
+	help
+	  Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
+
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
 	depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 08533bd5cba..6adf4c9b905 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
 obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
 obj-$(CONFIG_MTD_BCM963XX)	+= bcm963xx-flash.o
 obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
+obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index e5f645b775a..23f551dc8ca 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -42,7 +42,7 @@
  *
  * Please note:
  *  1. The flash size given should be the largest flash size that can
- *     be accomodated.
+ *     be accommodated.
  *
  *  2. The bus width must defined in clps_setup_flash.
  *
@@ -58,7 +58,7 @@
 #define BOOT_PARTITION_SIZE_KiB       (16)
 #define PARAMS_PARTITION_SIZE_KiB     (8)
 #define KERNEL_PARTITION_SIZE_KiB     (4*128)
-/* Use both remaing portion of first flash, and all of second flash */
+/* Use both remaining portion of first flash, and all of second flash */
 #define ROOT_PARTITION_SIZE_KiB       (3*128) + (8*128)
 
 static struct mtd_partition ceiva_partitions[] = {
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index b4ed8161191..f71343cd77c 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -33,7 +33,7 @@
 
 
 /* We split the flash chip up into four parts.
- * 1: bootloader firts 128k			(0x00000000 - 0x0001FFFF) size 0x020000
+ * 1: bootloader first 128k			(0x00000000 - 0x0001FFFF) size 0x020000
  * 2: kernel 640k					(0x00020000 - 0x000BFFFF) size 0x0A0000
  * 3: compressed 1536k root ramdisk	(0x000C0000 - 0x0023FFFF) size 0x180000
  * 4: writeable diskpartition (jffs)(0x00240000 - 0x003FFFFF) size 0x1C0000
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
new file mode 100644
index 00000000000..a90cabd7b84
--- /dev/null
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -0,0 +1,251 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_platform.h>
+
+/*
+ * The NOR flash is connected to the same external bus unit (EBU) as PCI.
+ * To make PCI work we need to enable the endianness swapping for the address
+ * written to the EBU. This endianness swapping works for PCI correctly but
+ * fails for attached NOR devices. To workaround this we need to use a complex
+ * map. The workaround involves swapping all addresses whilst probing the chip.
+ * Once probing is complete we stop swapping the addresses but swizzle the
+ * unlock addresses to ensure that access to the NOR device works correctly.
+ */
+
+enum {
+	LTQ_NOR_PROBING,
+	LTQ_NOR_NORMAL
+};
+
+struct ltq_mtd {
+	struct resource *res;
+	struct mtd_info *mtd;
+	struct map_info *map;
+};
+
+static char ltq_map_name[] = "ltq_nor";
+
+static map_word
+ltq_read16(struct map_info *map, unsigned long adr)
+{
+	unsigned long flags;
+	map_word temp;
+
+	if (map->map_priv_1 == LTQ_NOR_PROBING)
+		adr ^= 2;
+	spin_lock_irqsave(&ebu_lock, flags);
+	temp.x[0] = *(u16 *)(map->virt + adr);
+	spin_unlock_irqrestore(&ebu_lock, flags);
+	return temp;
+}
+
+static void
+ltq_write16(struct map_info *map, map_word d, unsigned long adr)
+{
+	unsigned long flags;
+
+	if (map->map_priv_1 == LTQ_NOR_PROBING)
+		adr ^= 2;
+	spin_lock_irqsave(&ebu_lock, flags);
+	*(u16 *)(map->virt + adr) = d.x[0];
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+/*
+ * The following 2 functions copy data between iomem and a cached memory
+ * section. As memcpy() makes use of pre-fetching we cannot use it here.
+ * The normal alternative of using memcpy_{to,from}io also makes use of
+ * memcpy() on MIPS so it is not applicable either. We are therefore stuck
+ * with having to use our own loop.
+ */
+static void
+ltq_copy_from(struct map_info *map, void *to,
+	unsigned long from, ssize_t len)
+{
+	unsigned char *f = (unsigned char *)map->virt + from;
+	unsigned char *t = (unsigned char *)to;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	while (len--)
+		*t++ = *f++;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void
+ltq_copy_to(struct map_info *map, unsigned long to,
+	const void *from, ssize_t len)
+{
+	unsigned char *f = (unsigned char *)from;
+	unsigned char *t = (unsigned char *)map->virt + to;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	while (len--)
+		*t++ = *f++;
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static const char const *part_probe_types[] = { "cmdlinepart", NULL };
+
+static int __init
+ltq_mtd_probe(struct platform_device *pdev)
+{
+	struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
+	struct ltq_mtd *ltq_mtd;
+	struct mtd_partition *parts;
+	struct resource *res;
+	int nr_parts = 0;
+	struct cfi_private *cfi;
+	int err;
+
+	ltq_mtd = kzalloc(sizeof(struct ltq_mtd), GFP_KERNEL);
+	platform_set_drvdata(pdev, ltq_mtd);
+
+	ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ltq_mtd->res) {
+		dev_err(&pdev->dev, "failed to get memory resource");
+		err = -ENOENT;
+		goto err_out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, ltq_mtd->res->start,
+		resource_size(ltq_mtd->res), dev_name(&pdev->dev));
+	if (!ltq_mtd->res) {
+		dev_err(&pdev->dev, "failed to request mem resource");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
+	ltq_mtd->map->phys = res->start;
+	ltq_mtd->map->size = resource_size(res);
+	ltq_mtd->map->virt = devm_ioremap_nocache(&pdev->dev,
+				ltq_mtd->map->phys, ltq_mtd->map->size);
+	if (!ltq_mtd->map->virt) {
+		dev_err(&pdev->dev, "failed to ioremap!\n");
+		err = -ENOMEM;
+		goto err_free;
+	}
+
+	ltq_mtd->map->name = ltq_map_name;
+	ltq_mtd->map->bankwidth = 2;
+	ltq_mtd->map->read = ltq_read16;
+	ltq_mtd->map->write = ltq_write16;
+	ltq_mtd->map->copy_from = ltq_copy_from;
+	ltq_mtd->map->copy_to = ltq_copy_to;
+
+	ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+	ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
+	ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
+
+	if (!ltq_mtd->mtd) {
+		dev_err(&pdev->dev, "probing failed\n");
+		err = -ENXIO;
+		goto err_unmap;
+	}
+
+	ltq_mtd->mtd->owner = THIS_MODULE;
+
+	cfi = ltq_mtd->map->fldrv_priv;
+	cfi->addr_unlock1 ^= 1;
+	cfi->addr_unlock2 ^= 1;
+
+	nr_parts = parse_mtd_partitions(ltq_mtd->mtd,
+				part_probe_types, &parts, 0);
+	if (nr_parts > 0) {
+		dev_info(&pdev->dev,
+			"using %d partitions from cmdline", nr_parts);
+	} else {
+		nr_parts = ltq_mtd_data->nr_parts;
+		parts = ltq_mtd_data->parts;
+	}
+
+	err = add_mtd_partitions(ltq_mtd->mtd, parts, nr_parts);
+	if (err) {
+		dev_err(&pdev->dev, "failed to add partitions\n");
+		goto err_destroy;
+	}
+
+	return 0;
+
+err_destroy:
+	map_destroy(ltq_mtd->mtd);
+err_unmap:
+	iounmap(ltq_mtd->map->virt);
+err_free:
+	kfree(ltq_mtd->map);
+err_out:
+	kfree(ltq_mtd);
+	return err;
+}
+
+static int __devexit
+ltq_mtd_remove(struct platform_device *pdev)
+{
+	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
+
+	if (ltq_mtd) {
+		if (ltq_mtd->mtd) {
+			del_mtd_partitions(ltq_mtd->mtd);
+			map_destroy(ltq_mtd->mtd);
+		}
+		if (ltq_mtd->map->virt)
+			iounmap(ltq_mtd->map->virt);
+		kfree(ltq_mtd->map);
+		kfree(ltq_mtd);
+	}
+	return 0;
+}
+
+static struct platform_driver ltq_mtd_driver = {
+	.remove = __devexit_p(ltq_mtd_remove),
+	.driver = {
+		.name = "ltq_nor",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init
+init_ltq_mtd(void)
+{
+	int ret = platform_driver_probe(&ltq_mtd_driver, ltq_mtd_probe);
+
+	if (ret)
+		pr_err("ltq_nor: error registering platform driver");
+	return ret;
+}
+
+static void __exit
+exit_ltq_mtd(void)
+{
+	platform_driver_unregister(&ltq_mtd_driver);
+}
+
+module_init(init_ltq_mtd);
+module_exit(exit_ltq_mtd);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC NOR");
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 91702294839..6799e75d74e 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -497,7 +497,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 		dev->pcmcia_map.set_vpp = pcmciamtd_set_vpp;
 
 	/* Request a memory window for PCMCIA. Some architeures can map windows
-	 * upto the maximum that PCMCIA can support (64MiB) - this is ideal and
+	 * up to the maximum that PCMCIA can support (64MiB) - this is ideal and
 	 * we aim for a window the size of the whole card - otherwise we try
 	 * smaller windows until we succeed
 	 */
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index bd483f0c57e..c1d33464aee 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -214,11 +214,13 @@ static void __devinit of_free_probes(const char **probes)
 }
 #endif
 
+static struct of_device_id of_flash_match[];
 static int __devinit of_flash_probe(struct platform_device *dev)
 {
 #ifdef CONFIG_MTD_PARTITIONS
 	const char **part_probe_types;
 #endif
+	const struct of_device_id *match;
 	struct device_node *dp = dev->dev.of_node;
 	struct resource res;
 	struct of_flash *info;
@@ -232,9 +234,10 @@ static int __devinit of_flash_probe(struct platform_device *dev)
 	struct mtd_info **mtd_list = NULL;
 	resource_size_t res_size;
 
-	if (!dev->dev.of_match)
+	match = of_match_device(of_flash_match, &dev->dev);
+	if (!match)
 		return -EINVAL;
-	probe_type = dev->dev.of_match->data;
+	probe_type = match->data;
 
 	reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
 
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index acb13fa5001..64aea6acd48 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -3,7 +3,7 @@
  * Config with both CFI and JEDEC device support.
  *
  * Basically physmap.c with the addition of partitions and
- * an array of mapping info to accomodate more than one flash type per board.
+ * an array of mapping info to accommodate more than one flash type per board.
  *
  * Copyright 2005-2007 PMC-Sierra, Inc.
  *
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 85c1e56309e..4d8aaaf4bb7 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -197,7 +197,7 @@ static void sc520cdp_setup_par(void)
 	}
 
 	/*
-	** Find the PARxx registers that are reponsible for activating
+	** Find the PARxx registers that are responsible for activating
 	** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a
 	** new value from the table.
 	*/
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index c08e140d40e..0718dfb3ee6 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -63,7 +63,7 @@ static void __iomem *start_scan_addr;
  */
 
 #ifdef CONFIG_MTD_PARTITIONS
-/* Currently, TQM8xxL has upto 8MiB flash */
+/* Currently, TQM8xxL has up to 8MiB flash */
 static unsigned long tqm8xxl_max_flash_size = 0x00800000;
 
 /* partition definition for first flash bank
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 1e74ad96104..3326615ad66 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -129,7 +129,7 @@ static int write_cached_data (struct mtdblk_dev *mtdblk)
 		return ret;
 
 	/*
-	 * Here we could argubly set the cache state to STATE_CLEAN.
+	 * Here we could arguably set the cache state to STATE_CLEAN.
 	 * However this could lead to inconsistency since we will not
 	 * be notified if this content is altered on the flash by other
 	 * means.  Let's declare it empty and leave buffering tasks to
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 145b3d0dc0d..4c36ef66a46 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -234,7 +234,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
 		 * the data. For our userspace tools it is important
 		 * to dump areas with ecc errors !
 		 * For kernel internal usage it also might return -EUCLEAN
-		 * to signal the caller that a bitflip has occured and has
+		 * to signal the caller that a bitflip has occurred and has
 		 * been corrected by the ECC algorithm.
 		 * Userspace software which accesses NAND this way
 		 * must be aware of the fact that it deals with NAND
diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c
index 237913c5c92..fed215c4cfa 100644
--- a/drivers/mtd/mtdswap.c
+++ b/drivers/mtd/mtdswap.c
@@ -1452,7 +1452,7 @@ static void mtdswap_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 	oinfo = mtd->ecclayout;
 	if (!mtd->oobsize || !oinfo || oinfo->oobavail < MTDSWAP_OOBSIZE) {
 		printk(KERN_ERR "%s: Not enough free bytes in OOB, "
-			"%d available, %lu needed.\n",
+			"%d available, %zu needed.\n",
 			MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE);
 		return;
 	}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a92054e945e..edec457d361 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -239,7 +239,7 @@ config MTD_NAND_BCM_UMI
 	help
 	  This enables the NAND flash controller on the BCM UMI block.
 
-	  No board specfic support is done by this driver, each board
+	  No board specific support is done by this driver, each board
 	  must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_BCM_UMI_HWCS
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index a067d090cb3..bc65bf71e1a 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -228,7 +228,7 @@ static int __devinit ams_delta_init(struct platform_device *pdev)
 					  AMS_DELTA_LATCH2_NAND_NCE |
 					  AMS_DELTA_LATCH2_NAND_NWP);
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(ams_delta_mtd, 1)) {
 		err = -ENXIO;
 		goto out_mtd;
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 6fae04b3fc6..950646aa4c4 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -209,22 +209,8 @@ static int atmel_nand_dma_op(struct mtd_info *mtd, void *buf, int len,
 	int err = -EIO;
 	enum dma_data_direction dir = is_read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 
-	if (buf >= high_memory) {
-		struct page *pg;
-
-		if (((size_t)buf & PAGE_MASK) !=
-		    ((size_t)(buf + len - 1) & PAGE_MASK)) {
-			dev_warn(host->dev, "Buffer not fit in one page\n");
-			goto err_buf;
-		}
-
-		pg = vmalloc_to_page(buf);
-		if (pg == 0) {
-			dev_err(host->dev, "Failed to vmalloc_to_page\n");
-			goto err_buf;
-		}
-		p = page_address(pg) + ((size_t)buf & ~PAGE_MASK);
-	}
+	if (buf >= high_memory)
+		goto err_buf;
 
 	dma_dev = host->dma_chan->device;
 
@@ -280,7 +266,8 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 	struct nand_chip *chip = mtd->priv;
 	struct atmel_nand_host *host = chip->priv;
 
-	if (use_dma && len >= mtd->oobsize)
+	if (use_dma && len > mtd->oobsize)
+		/* only use DMA for bigger than oob size: better performances */
 		if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
 			return;
 
@@ -295,7 +282,8 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 	struct nand_chip *chip = mtd->priv;
 	struct atmel_nand_host *host = chip->priv;
 
-	if (use_dma && len >= mtd->oobsize)
+	if (use_dma && len > mtd->oobsize)
+		/* only use DMA for bigger than oob size: better performances */
 		if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
 			return;
 
@@ -599,7 +587,10 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		nand_chip->options |= NAND_USE_FLASH_BBT;
 	}
 
-	if (cpu_has_dma() && use_dma) {
+	if (!cpu_has_dma())
+		use_dma = 0;
+
+	if (use_dma) {
 		dma_cap_mask_t mask;
 
 		dma_cap_zero(mask);
@@ -611,7 +602,8 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		}
 	}
 	if (use_dma)
-		dev_info(host->dev, "Using DMA for NAND access.\n");
+		dev_info(host->dev, "Using %s for DMA transfers.\n",
+					dma_chan_name(host->dma_chan));
 	else
 		dev_info(host->dev, "No DMA support for NAND access.\n");
 
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 3ffe05db492..5d513b54a7d 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -470,7 +471,7 @@ static int __init au1xxx_nand_init(void)
 
 #ifdef CONFIG_MIPS_PB1550
 	/* set gpio206 high */
-	au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
+	gpio_direction_input(206);
 
 	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
 
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 7c95da1f612..0911cf03db8 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -176,7 +176,7 @@ static int __init autcpu12_init(void)
 	 */
 	this->options = NAND_USE_FLASH_BBT;
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(autcpu12_mtd, 1)) {
 		err = -ENXIO;
 		goto out_ior;
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 9f1b451005c..71c35a0b982 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -241,7 +241,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 	/* Enable the following for a flash based bad block table */
 	this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(new_mtd, 1)) {
 		err = -ENXIO;
 		goto out_ior;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 8c8d3c86c0e..4633f094c51 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -724,7 +724,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
 }
 
 /* This helper function setups the registers for ECC and whether or not
- * the spare area will be transfered. */
+ * the spare area will be transferred. */
 static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
 				bool transfer_spare)
 {
@@ -965,7 +965,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
 
 			if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
 				/* If err_byte is larger than ECC_SECTOR_SIZE,
-				 * means error happend in OOB, so we ignore
+				 * means error happened in OOB, so we ignore
 				 * it. It's no need for us to correct it
 				 * err_device is represented the NAND error
 				 * bits are happened in if there are more
@@ -1109,7 +1109,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /* This is the callback that the NAND core calls to write a page without ECC.
- * raw access is similiar to ECC page writes, so all the work is done in the
+ * raw access is similar to ECC page writes, so all the work is done in the
  * write_page() function above.
  */
 static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index b7f8de7b278..657b9f4b6f9 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -137,7 +137,7 @@ static struct rs_control *rs_decoder;
  *
  * Fabrice Bellard figured this out in the old docecc code. I added
  * some comments, improved a minor bit and converted it to make use
- * of the generic Reed-Solomon libary. tglx
+ * of the generic Reed-Solomon library. tglx
  */
 static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 {
@@ -400,7 +400,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
 	doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
 	doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
-	/* We cant' use dev_ready here, but at least we wait for the
+	/* We can't use dev_ready here, but at least we wait for the
 	 * command to complete
 	 */
 	udelay(50);
@@ -986,7 +986,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
 		dummy = ReadDOC(docptr, ECCConf);
 	}
 
-	/* Error occured ? */
+	/* Error occurred ? */
 	if (dummy & 0x80) {
 		for (i = 0; i < 6; i++) {
 			if (DoC_is_MillenniumPlus(doc))
@@ -1160,7 +1160,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 	/* NOTE: The lines below modify internal variables of the NAND and MTD
 	   layers; variables with have already been configured by nand_scan.
 	   Unfortunately, we didn't know before this point what these values
-	   should be.  Thus, this code is somewhat dependant on the exact
+	   should be.  Thus, this code is somewhat dependent on the exact
 	   implementation of the NAND layer.  */
 	if (mh->UnitSizeFactor != 0xff) {
 		this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 7a13d42cbab..537e380b8dc 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -59,7 +59,7 @@ struct fsl_elbc_mtd {
 	unsigned int fmr;       /* FCM Flash Mode Register value     */
 };
 
-/* Freescale eLBC FCM controller infomation */
+/* Freescale eLBC FCM controller information */
 
 struct fsl_elbc_fcm_ctrl {
 	struct nand_hw_control controller;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 205b10b9f9b..0d45ef3883e 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -335,7 +335,7 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
 
 /*
  * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
- * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto
+ * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
  * max of 8-bits)
  */
 static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
@@ -381,7 +381,7 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
 
 /*
  * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
- * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto
+ * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
  * max of 1-bit)
  */
 static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
@@ -408,10 +408,10 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
  * @buf:	buffer to store read data
  * @page:	page number to read
  *
- * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
+ * This routine is needed for fsmc version 8 as reading from NAND chip has to be
  * performed in a strict sequence as follows:
  * data(512 byte) -> ecc(13 byte)
- * After this read, fsmc hardware generates and reports error data bits(upto a
+ * After this read, fsmc hardware generates and reports error data bits(up to a
  * max of 8 bits)
  */
 static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
@@ -686,7 +686,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 	}
 
 	/*
-	 * Scan to find existance of the device
+	 * Scan to find existence of the device
 	 */
 	if (nand_scan_ident(&host->mtd, 1, NULL)) {
 		ret = -ENXIO;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 85cfc061d41..c54a4cbac6b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1582,7 +1582,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 }
 
 /**
- * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
+ * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
  * @mtd:	MTD device structure
  * @from:	offset to read from
  * @len:	number of bytes to read
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index a1e8b30078d..af46428286f 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -945,7 +945,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 		rd2 = NULL;
 		/* Per chip or per device ? */
 		chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
-		/* Mirrored table avilable ? */
+		/* Mirrored table available ? */
 		if (md) {
 			if (td->pages[i] == -1 && md->pages[i] == -1) {
 				writeops = 0x03;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 213181be0d9..893d95bfea4 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -162,7 +162,7 @@ MODULE_PARM_DESC(bitflips,       "Maximum number of random bit flips per page (z
 MODULE_PARM_DESC(gravepages,     "Pages that lose data [: maximum reads (defaults to 3)]"
 				 " separated by commas e.g. 1401:2 means page 1401"
 				 " can be read only twice before failing");
-MODULE_PARM_DESC(rptwear,        "Number of erases inbetween reporting wear, if not zero");
+MODULE_PARM_DESC(rptwear,        "Number of erases between reporting wear, if not zero");
 MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the ID bytes. "
 				 "The size is specified in erase blocks and as the exponent of a power of two"
 				 " e.g. 5 means a size of 32 erase blocks");
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
index 8c0b6937522..a045a4a581b 100644
--- a/drivers/mtd/nand/nomadik_nand.c
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -151,7 +151,7 @@ static int nomadik_nand_probe(struct platform_device *pdev)
 	nand->options = pdata->options;
 
 	/*
-	 * Scan to find existance of the device
+	 * Scan to find existence of the device
 	 */
 	if (nand_scan(&host->mtd, 1)) {
 		ret = -ENXIO;
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 59efa829ef2..20bfe5f15af 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -157,7 +157,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
 	/* Enable the following for a flash based bad block table */
 	chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(pasemi_nand_mtd, 1)) {
 		err = -ENXIO;
 		goto out_lpc;
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 317aff428e4..caf5a736340 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -95,7 +95,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 			goto out;
 	}
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
 		err = -ENXIO;
 		goto out;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index ab7f4c33ced..ff0701276d6 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -184,7 +184,7 @@ struct pxa3xx_nand_info {
 
 static int use_dma = 1;
 module_param(use_dma, bool, 0444);
-MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
+MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
 
 /*
  * Default NAND flash controller configuration setup by the
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 6322d1fb5d6..cae2e013c98 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -185,7 +185,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
 
 	dbg_verbose("doing dma %s ", do_read ? "read" : "write");
 
-	/* Set intial dma state: for reading first fill on board buffer,
+	/* Set initial dma state: for reading first fill on board buffer,
 	  from device, for writes first fill the buffer  from memory*/
 	dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
 
@@ -766,7 +766,7 @@ static irqreturn_t r852_irq(int irq, void *data)
 		ret = IRQ_HANDLED;
 		dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
 
-		/* we shouldn't recieve any interrupts if we wait for card
+		/* we shouldn't receive any interrupts if we wait for card
 			to settle */
 		WARN_ON(dev->card_unstable);
 
@@ -794,13 +794,13 @@ static irqreturn_t r852_irq(int irq, void *data)
 		ret = IRQ_HANDLED;
 
 		if (dma_status & R852_DMA_IRQ_ERROR) {
-			dbg("recieved dma error IRQ");
+			dbg("received dma error IRQ");
 			r852_dma_done(dev, -EIO);
 			complete(&dev->dma_done);
 			goto out;
 		}
 
-		/* recieved DMA interrupt out of nowhere? */
+		/* received DMA interrupt out of nowhere? */
 		WARN_ON_ONCE(dev->dma_stage == 0);
 
 		if (dev->dma_stage == 0)
@@ -960,7 +960,7 @@ int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 		&dev->card_detect_work, 0);
 
 
-	printk(KERN_NOTICE DRV_NAME ": driver loaded succesfully\n");
+	printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n");
 	return 0;
 
 error10:
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 546c2f0eb2e..81bbb5ee148 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -78,7 +78,7 @@ static void start_translation(struct sh_flctl *flctl)
 
 static void timeout_error(struct sh_flctl *flctl, const char *str)
 {
-	dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str);
+	dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
 }
 
 static void wait_completion(struct sh_flctl *flctl)
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index 4a8f367c295..57cc80cd01a 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -121,7 +121,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
 	if (ret)
 		return ret;
 
-	/* Bad block marker postion */
+	/* Bad block marker position */
 	chip->badblockpos = 0x05;
 	chip->badblockbits = 7;
 	chip->block_markbad = sm_block_markbad;
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 38fb16771f8..14c57870782 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -4,7 +4,7 @@
  * Slightly murky pre-git history of the driver:
  *
  * Copyright (c) Ian Molton 2004, 2005, 2008
- *    Original work, independant of sharps code. Included hardware ECC support.
+ *    Original work, independent of sharps code. Included hardware ECC support.
  *    Hard ECC did not work for writes in the early revisions.
  * Copyright (c) Dirk Opfer 2005.
  *    Modifications developed from sharps code but
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index f591f615d3f..1fcb41adab0 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -608,7 +608,7 @@ static int omap2_onenand_enable(struct mtd_info *mtd)
 
 	ret = regulator_enable(c->regulator);
 	if (ret != 0)
-		dev_err(&c->pdev->dev, "cant enable regulator\n");
+		dev_err(&c->pdev->dev, "can't enable regulator\n");
 
 	return ret;
 }
@@ -620,7 +620,7 @@ static int omap2_onenand_disable(struct mtd_info *mtd)
 
 	ret = regulator_disable(c->regulator);
 	if (ret != 0)
-		dev_err(&c->pdev->dev, "cant disable regulator\n");
+		dev_err(&c->pdev->dev, "can't disable regulator\n");
 
 	return ret;
 }
diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
index 8b246061d51..5ef3bd54777 100644
--- a/drivers/mtd/onenand/onenand_sim.c
+++ b/drivers/mtd/onenand/onenand_sim.c
@@ -321,7 +321,7 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
 				continue;
 			if (memcmp(dest + off, ffchars, this->subpagesize) &&
 			    onenand_check_overwrite(dest + off, src + off, this->subpagesize))
-				printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
+				printk(KERN_ERR "over-write happened at 0x%08x\n", offset);
 			memcpy(dest + off, src + off, this->subpagesize);
 		}
 		/* Fall through */
@@ -335,7 +335,7 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
 		dest = ONENAND_CORE_SPARE(flash, this, offset);
 		if (memcmp(dest, ffchars, mtd->oobsize) &&
 		    onenand_check_overwrite(dest, src, mtd->oobsize))
-			printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
+			printk(KERN_ERR "OOB: over-write happened at 0x%08x\n",
 			       offset);
 		memcpy(dest, src, mtd->oobsize);
 		break;
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 2b0daae4018..ed3d6cd2c6d 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -540,7 +540,7 @@ static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
 			return -EIO;
 	}
 
-	/* If the block is sliced (partialy erased usually) erase it */
+	/* If the block is sliced (partially erased usually) erase it */
 	if (i == 2) {
 		sm_erase_block(ftl, zone, block, 1);
 		return 1;
@@ -878,7 +878,7 @@ static int sm_init_zone(struct sm_ftl *ftl, int zone_num)
 	return 0;
 }
 
-/* Get and automaticly initialize an FTL mapping for one zone */
+/* Get and automatically initialize an FTL mapping for one zone */
 struct ftl_zone *sm_get_zone(struct sm_ftl *ftl, int zone_num)
 {
 	struct ftl_zone *zone;
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 6abeb4f1340..4dcc752a0c0 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -56,7 +56,7 @@ config MTD_UBI_DEBUG
 	bool "UBI debugging"
 	depends on SYSFS
 	select DEBUG_FS
-	select KALLSYMS_ALL if KALLSYMS && DEBUG_KERNEL
+	select KALLSYMS
 	help
 	  This option enables UBI debugging.
 
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index eededf94f5a..e347cc4388e 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -344,6 +344,12 @@ static int do_sync_erase(struct ubi_device *ubi, int pnum)
 	wait_queue_head_t wq;
 
 	dbg_io("erase PEB %d", pnum);
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+
+	if (ubi->ro_mode) {
+		ubi_err("read-only mode");
+		return -EROFS;
+	}
 
 retry:
 	init_waitqueue_head(&wq);
@@ -390,7 +396,7 @@ retry:
 	if (err)
 		return err;
 
-	if (ubi_dbg_is_erase_failure() && !err) {
+	if (ubi_dbg_is_erase_failure()) {
 		dbg_err("cannot erase PEB %d (emulated)", pnum);
 		return -EIO;
 	}
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 11eb8ef1248..d2d12ab7def 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -968,7 +968,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			 * contains garbage because of a power cut during erase
 			 * operation. So we just schedule this PEB for erasure.
 			 *
-			 * Besides, in case of NOR flash, we deliberatly
+			 * Besides, in case of NOR flash, we deliberately
 			 * corrupt both headers because NOR flash erasure is
 			 * slow and can start from the end.
 			 */
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index b79e0dea363..366eb70219a 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -790,11 +790,6 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 		goto fail;
 	}
 
-	if (!vol->name) {
-		ubi_err("NULL volume name");
-		goto fail;
-	}
-
 	n = strnlen(vol->name, vol->name_len + 1);
 	if (n != vol->name_len) {
 		ubi_err("bad name_len %lld", n);
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 9e1c03eb97a..5420f6de27d 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -399,7 +399,7 @@ static void el_timeout(struct net_device *dev)
  * as we may still be attempting to retrieve the last RX packet buffer.
  *
  * When a transmit times out we dump the card into control mode and just
- * start again. It happens enough that it isnt worth logging.
+ * start again. It happens enough that it isn't worth logging.
  *
  * We avoid holding the spin locks when doing the packet load to the board.
  * The device is very slow, and its DMA mode is even slower. If we held the
@@ -499,7 +499,7 @@ static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev)
  *
  * Handle the ether interface interrupts. The 3c501 needs a lot more
  * hand holding than most cards. In particular we get a transmit interrupt
- * with a collision error because the board firmware isnt capable of rewinding
+ * with a collision error because the board firmware isn't capable of rewinding
  * its own transmit buffer pointers. It can however count to 16 for us.
  *
  * On the receive side the card is also very dumb. It has no buffering to
@@ -732,7 +732,7 @@ static void el_receive(struct net_device *dev)
  * el_reset: Reset a 3c501 card
  * @dev: The 3c501 card about to get zapped
  *
- * Even resetting a 3c501 isnt simple. When you activate reset it loses all
+ * Even resetting a 3c501 isn't simple. When you activate reset it loses all
  * its configuration. You must hold the lock when doing this. The function
  * cannot take the lock itself as it is callable from the irq handler.
  */
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 91abb965fb4..5f25889e27e 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -185,7 +185,7 @@ static int max_interrupt_work = 10;
 static int nopnp;
 #endif
 
-static int __devinit el3_common_init(struct net_device *dev);
+static int el3_common_init(struct net_device *dev);
 static void el3_common_remove(struct net_device *dev);
 static ushort id_read_eeprom(int index);
 static ushort read_eeprom(int ioaddr, int index);
@@ -395,7 +395,7 @@ static struct isa_driver el3_isa_driver = {
 static int isa_registered;
 
 #ifdef CONFIG_PNP
-static struct pnp_device_id el3_pnp_ids[] = {
+static const struct pnp_device_id el3_pnp_ids[] __devinitconst = {
 	{ .id = "TCM5090" }, /* 3Com Etherlink III (TP) */
 	{ .id = "TCM5091" }, /* 3Com Etherlink III */
 	{ .id = "TCM5094" }, /* 3Com Etherlink III (combo) */
@@ -478,7 +478,7 @@ static int pnp_registered;
 #endif /* CONFIG_PNP */
 
 #ifdef CONFIG_EISA
-static struct eisa_device_id el3_eisa_ids[] = {
+static const struct eisa_device_id el3_eisa_ids[] __devinitconst = {
 		{ "TCM5090" },
 		{ "TCM5091" },
 		{ "TCM5092" },
@@ -508,7 +508,7 @@ static int eisa_registered;
 #ifdef CONFIG_MCA
 static int el3_mca_probe(struct device *dev);
 
-static short el3_mca_adapter_ids[] __initdata = {
+static const short el3_mca_adapter_ids[] __devinitconst = {
 		0x627c,
 		0x627d,
 		0x62db,
@@ -517,7 +517,7 @@ static short el3_mca_adapter_ids[] __initdata = {
 		0x0000
 };
 
-static char *el3_mca_adapter_names[] __initdata = {
+static const char *const el3_mca_adapter_names[] __devinitconst = {
 		"3Com 3c529 EtherLink III (10base2)",
 		"3Com 3c529 EtherLink III (10baseT)",
 		"3Com 3c529 EtherLink III (test mode)",
@@ -601,7 +601,7 @@ static void el3_common_remove (struct net_device *dev)
 }
 
 #ifdef CONFIG_MCA
-static int __init el3_mca_probe(struct device *device)
+static int __devinit el3_mca_probe(struct device *device)
 {
 	/* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch,
 	 * heavily modified by Chris Beauregard
@@ -671,7 +671,7 @@ static int __init el3_mca_probe(struct device *device)
 #endif /* CONFIG_MCA */
 
 #ifdef CONFIG_EISA
-static int __init el3_eisa_probe (struct device *device)
+static int __devinit el3_eisa_probe (struct device *device)
 {
 	short i;
 	int ioaddr, irq, if_port;
@@ -1207,7 +1207,7 @@ el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 			ecmd->duplex = DUPLEX_FULL;
 	}
 
-	ecmd->speed = SPEED_10;
+	ethtool_cmd_speed_set(ecmd, SPEED_10);
 	EL3WINDOW(1);
 	return 0;
 }
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index de579d04316..bc0d1a1c2e2 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -44,7 +44,7 @@
    this for the 64K version would require a lot of heinous bank
    switching, which I'm sure not interested in doing.  If you try to
    implement a bank switching version, you'll basically have to remember
-   what bank is enabled and do a switch everytime you access a memory
+   what bank is enabled and do a switch every time you access a memory
    location that's not current.  You'll also have to remap pointers on
    the driver side, because it only knows about 16K of the memory.
    Anyone desperate or masochistic enough to try?
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 8c094bae8bf..d9d056d207f 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -51,7 +51,7 @@ DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Richard Procter <rnp@paradise.net.
  *	circular buffer queues.
  *
  *	The mailboxes can be used for controlling how the card traverses
- *	its buffer rings, but are used only for inital setup in this
+ *	its buffer rings, but are used only for initial setup in this
  *	implementation.  The exec mailbox allows a variety of commands to
  *	be executed. Each command must complete before the next is
  *	executed. Primarily we use the exec mailbox for controlling the
@@ -813,7 +813,7 @@ static void mc32_flush_rx_ring(struct net_device *dev)
  *
  *	This sets up the host transmit data-structures.
  *
- *	First, we obtain from the card it's current postion in the tx
+ *	First, we obtain from the card it's current position in the tx
  *	ring, so that we will know where to begin transmitting
  *	packets.
  *
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 0a92436f053..99f43d27544 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -901,14 +901,14 @@ static const struct dev_pm_ops vortex_pm_ops = {
 #endif /* !CONFIG_PM */
 
 #ifdef CONFIG_EISA
-static struct eisa_device_id vortex_eisa_ids[] = {
+static const struct eisa_device_id vortex_eisa_ids[] __devinitconst = {
 	{ "TCM5920", CH_3C592 },
 	{ "TCM5970", CH_3C597 },
 	{ "" }
 };
 MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids);
 
-static int __init vortex_eisa_probe(struct device *device)
+static int __devinit vortex_eisa_probe(struct device *device)
 {
 	void __iomem *ioaddr;
 	struct eisa_device *edev;
@@ -984,7 +984,7 @@ static int __init vortex_eisa_init(void)
 		 * any device have been found when we exit from
 		 * eisa_driver_register (the bus root driver may not be
 		 * initialized yet). So we blindly assume something was
-		 * found, and let the sysfs magic happend...
+		 * found, and let the sysfs magic happened...
 		 */
 		eisa_found = 1;
 	}
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index dd16e83933a..10c45051cae 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -758,8 +758,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
 
 	entry = cp->tx_head;
 	eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
-	if (dev->features & NETIF_F_TSO)
-		mss = skb_shinfo(skb)->gso_size;
+	mss = skb_shinfo(skb)->gso_size;
 
 	if (skb_shinfo(skb)->nr_frags == 0) {
 		struct cp_desc *txd = &cp->tx_ring[entry];
@@ -1416,32 +1415,23 @@ static void cp_set_msglevel(struct net_device *dev, u32 value)
 	cp->msg_enable = value;
 }
 
-static u32 cp_get_rx_csum(struct net_device *dev)
+static int cp_set_features(struct net_device *dev, u32 features)
 {
 	struct cp_private *cp = netdev_priv(dev);
-	return (cpr16(CpCmd) & RxChkSum) ? 1 : 0;
-}
+	unsigned long flags;
 
-static int cp_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct cp_private *cp = netdev_priv(dev);
-	u16 cmd = cp->cpcmd, newcmd;
+	if (!((dev->features ^ features) & NETIF_F_RXCSUM))
+		return 0;
 
-	newcmd = cmd;
+	spin_lock_irqsave(&cp->lock, flags);
 
-	if (data)
-		newcmd |= RxChkSum;
+	if (features & NETIF_F_RXCSUM)
+		cp->cpcmd |= RxChkSum;
 	else
-		newcmd &= ~RxChkSum;
-
-	if (newcmd != cmd) {
-		unsigned long flags;
+		cp->cpcmd &= ~RxChkSum;
 
-		spin_lock_irqsave(&cp->lock, flags);
-		cp->cpcmd = newcmd;
-		cpw16_f(CpCmd, newcmd);
-		spin_unlock_irqrestore(&cp->lock, flags);
-	}
+	cpw16_f(CpCmd, cp->cpcmd);
+	spin_unlock_irqrestore(&cp->lock, flags);
 
 	return 0;
 }
@@ -1554,11 +1544,6 @@ static const struct ethtool_ops cp_ethtool_ops = {
 	.get_link		= ethtool_op_get_link,
 	.get_msglevel		= cp_get_msglevel,
 	.set_msglevel		= cp_set_msglevel,
-	.get_rx_csum		= cp_get_rx_csum,
-	.set_rx_csum		= cp_set_rx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_csum, /* local! */
-	.set_sg			= ethtool_op_set_sg,
-	.set_tso		= ethtool_op_set_tso,
 	.get_regs		= cp_get_regs,
 	.get_wol		= cp_get_wol,
 	.set_wol		= cp_set_wol,
@@ -1831,6 +1816,7 @@ static const struct net_device_ops cp_netdev_ops = {
 	.ndo_do_ioctl		= cp_ioctl,
 	.ndo_start_xmit		= cp_start_xmit,
 	.ndo_tx_timeout		= cp_tx_timeout,
+	.ndo_set_features	= cp_set_features,
 #if CP_VLAN_TAG_USED
 	.ndo_vlan_rx_register	= cp_vlan_rx_register,
 #endif
@@ -1934,6 +1920,9 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	cp->cpcmd = (pci_using_dac ? PCIDAC : 0) |
 		    PCIMulRW | RxChkSum | CpRxOn | CpTxOn;
 
+	dev->features |= NETIF_F_RXCSUM;
+	dev->hw_features |= NETIF_F_RXCSUM;
+
 	regs = ioremap(pciaddr, CP_REGS_SIZE);
 	if (!regs) {
 		rc = -EIO;
@@ -1966,9 +1955,8 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (pci_using_dac)
 		dev->features |= NETIF_F_HIGHDMA;
 
-#if 0 /* disabled by default until verified */
-	dev->features |= NETIF_F_TSO;
-#endif
+	/* disabled by default until verified */
+	dev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
 
 	dev->irq = pdev->irq;
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dc280bc8eba..19f04a34783 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2017,6 +2017,13 @@ config FTMAC100
 	  from Faraday. It is used on Faraday A320, Andes AG101 and some
 	  other ARM/NDS32 SoC's.
 
+config LANTIQ_ETOP
+	tristate "Lantiq SoC ETOP driver"
+	depends on SOC_TYPE_XWAY
+	help
+	  Support for the MII0 inside the Lantiq SoC
+
+
 source "drivers/net/fs_enet/Kconfig"
 
 source "drivers/net/octeon/Kconfig"
@@ -2536,7 +2543,7 @@ config S6GMAC
 source "drivers/net/stmmac/Kconfig"
 
 config PCH_GBE
-	tristate "PCH Gigabit Ethernet"
+	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
 	depends on PCI
 	select MII
 	---help---
@@ -2548,6 +2555,12 @@ config PCH_GBE
 	  to Gigabit Ethernet.
 	  This driver enables Gigabit Ethernet function.
 
+	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+	  Output Hub), ML7223.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7223 is companion chip for Intel Atom E6xx series.
+	  ML7223 is completely compatible for Intel EG20T PCH.
+
 endif # NETDEV_1000
 
 #
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 01b604ad155..209fbb70619 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -144,7 +144,7 @@ obj-$(CONFIG_NE3210) += ne3210.o 8390.o
 obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
 obj-$(CONFIG_B44) += b44.o
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+obj-$(CONFIG_NE_H8300) += ne-h8300.o
 obj-$(CONFIG_AX88796) += ax88796.o
 obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
 obj-$(CONFIG_FTMAC100) += ftmac100.o
@@ -219,7 +219,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
 obj-$(CONFIG_LP486E) += lp486e.o
 
 obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o
 obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
 obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
 obj-$(CONFIG_EQUALIZER) += eql.o
@@ -231,7 +231,7 @@ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
 obj-$(CONFIG_DECLANCE) += declance.o
 obj-$(CONFIG_ATARILANCE) += atarilance.o
 obj-$(CONFIG_A2065) += a2065.o
-obj-$(CONFIG_HYDRA) += hydra.o 8390.o
+obj-$(CONFIG_HYDRA) += hydra.o
 obj-$(CONFIG_ARIADNE) += ariadne.o
 obj-$(CONFIG_CS89x0) += cs89x0.o
 obj-$(CONFIG_MACSONIC) += macsonic.o
@@ -259,6 +259,7 @@ obj-$(CONFIG_MLX4_CORE) += mlx4/
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_ETHOC) += ethoc.o
 obj-$(CONFIG_GRETH) += greth.o
+obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
 
 obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
 
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 41d9911202d..d7c1bfe4b6e 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -68,6 +68,7 @@
 #include <linux/sockios.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
+#include <linux/prefetch.h>
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #include <linux/if_vlan.h>
@@ -1584,7 +1585,7 @@ static void ace_watchdog(struct net_device *data)
 	/*
 	 * We haven't received a stats update event for more than 2.5
 	 * seconds and there is data in the transmit queue, thus we
-	 * asume the card is stuck.
+	 * assume the card is stuck.
 	 */
 	if (*ap->tx_csm != ap->tx_ret_csm) {
 		printk(KERN_WARNING "%s: Transmitter is stuck, %08x\n",
@@ -2564,7 +2565,7 @@ restart:
 
 		/*
 		 * A TX-descriptor producer (an IRQ) might have gotten
-		 * inbetween, making the ring free again. Since xmit is
+		 * between, making the ring free again. Since xmit is
 		 * serialized, this is the only situation we have to
 		 * re-test.
 		 */
@@ -2658,15 +2659,15 @@ static int ace_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
 	link = readl(&regs->GigLnkState);
 	if (link & LNK_1000MB)
-		ecmd->speed = SPEED_1000;
+		ethtool_cmd_speed_set(ecmd, SPEED_1000);
 	else {
 		link = readl(&regs->FastLnkState);
 		if (link & LNK_100MB)
-			ecmd->speed = SPEED_100;
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
 		else if (link & LNK_10MB)
-			ecmd->speed = SPEED_10;
+			ethtool_cmd_speed_set(ecmd, SPEED_10);
 		else
-			ecmd->speed = 0;
+			ethtool_cmd_speed_set(ecmd, 0);
 	}
 	if (link & LNK_FULL_DUPLEX)
 		ecmd->duplex = DUPLEX_FULL;
@@ -2718,9 +2719,9 @@ static int ace_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		link |= LNK_TX_FLOW_CTL_Y;
 	if (ecmd->autoneg == AUTONEG_ENABLE)
 		link |= LNK_NEGOTIATE;
-	if (ecmd->speed != speed) {
+	if (ethtool_cmd_speed(ecmd) != speed) {
 		link &= ~(LNK_1000MB | LNK_100MB | LNK_10MB);
-		switch (speed) {
+		switch (ethtool_cmd_speed(ecmd)) {
 		case SPEED_1000:
 			link |= LNK_1000MB;
 			break;
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 2ca880b4c0d..241b185e656 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -106,7 +106,7 @@ MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "M
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
 module_param_array(speed_duplex, int, NULL, 0);
-MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotitate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
+MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
 module_param_array(coalesce, bool, NULL, 0);
 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
 module_param_array(dynamic_ipg, bool, NULL, 0);
@@ -1398,7 +1398,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
 		mc_filter[1] = mc_filter[0] = 0;
 		lp->options &= ~OPTION_MULTICAST_ENABLE;
 		amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
-		/* disable promiscous mode */
+		/* disable promiscuous mode */
 		writel(PROM, lp->mmio + CMD2);
 		return;
 	}
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 4af235d41fd..03e217a868d 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -527,7 +527,7 @@ static void __init etherh_banner(void)
  * Read the ethernet address string from the on board rom.
  * This is an ascii string...
  */
-static int __init etherh_addr(char *addr, struct expansion_card *ec)
+static int __devinit etherh_addr(char *addr, struct expansion_card *ec)
 {
 	struct in_chunk_dir cd;
 	char *s;
@@ -591,10 +591,11 @@ static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *i
 static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	cmd->supported	= etherh_priv(dev)->supported;
-	cmd->speed	= SPEED_10;
+	ethtool_cmd_speed_set(cmd, SPEED_10);
 	cmd->duplex	= DUPLEX_HALF;
 	cmd->port	= dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC;
-	cmd->autoneg	= dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+	cmd->autoneg	= (dev->flags & IFF_AUTOMEDIA ?
+			   AUTONEG_ENABLE : AUTONEG_DISABLE);
 	return 0;
 }
 
@@ -655,7 +656,7 @@ static const struct net_device_ops etherh_netdev_ops = {
 static u32 etherh_regoffsets[16];
 static u32 etherm_regoffsets[16];
 
-static int __init
+static int __devinit
 etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
 	const struct etherh_data *data = id->data;
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index aa07657744c..a7b0caa1817 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -891,15 +891,16 @@ ks8695_wan_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
 			cmd->advertising |= ADVERTISED_Pause;
 		cmd->autoneg = AUTONEG_ENABLE;
 
-		cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
+		ethtool_cmd_speed_set(cmd,
+				      (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10);
 		cmd->duplex = (ctrl & WMC_WDS) ?
 			DUPLEX_FULL : DUPLEX_HALF;
 	} else {
 		/* auto-negotiation is disabled */
 		cmd->autoneg = AUTONEG_DISABLE;
 
-		cmd->speed = (ctrl & WMC_WANF100) ?
-			SPEED_100 : SPEED_10;
+		ethtool_cmd_speed_set(cmd, ((ctrl & WMC_WANF100) ?
+					    SPEED_100 : SPEED_10));
 		cmd->duplex = (ctrl & WMC_WANFF) ?
 			DUPLEX_FULL : DUPLEX_HALF;
 	}
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index f4744fc8976..65a78f965dd 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -133,7 +133,7 @@ struct net_local {
 /* Run-time register bank 2 definitions. */
 #define DATAPORT		8		/* Word-wide DMA or programmed-I/O dataport. */
 #define TX_START		10
-#define COL16CNTL		11		/* Controll Reg for 16 collisions */
+#define COL16CNTL		11		/* Control Reg for 16 collisions */
 #define MODE13			13
 #define RX_CTRL			14
 /* Configuration registers only on the '865A/B chips. */
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index ce0091eb06f..1264d781b55 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -554,7 +554,7 @@ static unsigned long __init lance_probe1( struct net_device *dev,
 		memaddr == (unsigned short *)0xffe00000) {
 		/* PAMs card and Riebl on ST use level 5 autovector */
 		if (request_irq(IRQ_AUTO_5, lance_interrupt, IRQ_TYPE_PRIO,
-		            "PAM/Riebl-ST Ethernet", dev)) {
+		            "PAM,Riebl-ST Ethernet", dev)) {
 			printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 );
 			return 0;
 		}
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h
index 7cb375e0e29..925929d764c 100644
--- a/drivers/net/atl1c/atl1c.h
+++ b/drivers/net/atl1c/atl1c.h
@@ -566,9 +566,9 @@ struct atl1c_adapter {
 #define __AT_TESTING        0x0001
 #define __AT_RESETTING      0x0002
 #define __AT_DOWN           0x0003
-	u8 work_event;
-#define ATL1C_WORK_EVENT_RESET 		0x01
-#define ATL1C_WORK_EVENT_LINK_CHANGE	0x02
+	unsigned long work_event;
+#define	ATL1C_WORK_EVENT_RESET		0
+#define	ATL1C_WORK_EVENT_LINK_CHANGE	1
 	u32 msg_enable;
 
 	bool have_msi;
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index 7c521508313..7be884d0aaf 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -50,13 +50,13 @@ static int atl1c_get_settings(struct net_device *netdev,
 	ecmd->transceiver = XCVR_INTERNAL;
 
 	if (adapter->link_speed != SPEED_0) {
-		ecmd->speed = adapter->link_speed;
+		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 		if (adapter->link_duplex == FULL_DUPLEX)
 			ecmd->duplex = DUPLEX_FULL;
 		else
 			ecmd->duplex = DUPLEX_HALF;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -77,7 +77,8 @@ static int atl1c_set_settings(struct net_device *netdev,
 	if (ecmd->autoneg == AUTONEG_ENABLE) {
 		autoneg_advertised = ADVERTISED_Autoneg;
 	} else {
-		if (ecmd->speed == SPEED_1000) {
+		u32 speed = ethtool_cmd_speed(ecmd);
+		if (speed == SPEED_1000) {
 			if (ecmd->duplex != DUPLEX_FULL) {
 				if (netif_msg_link(adapter))
 					dev_warn(&adapter->pdev->dev,
@@ -86,7 +87,7 @@ static int atl1c_set_settings(struct net_device *netdev,
 				return -EINVAL;
 			}
 			autoneg_advertised = ADVERTISED_1000baseT_Full;
-		} else if (ecmd->speed == SPEED_100) {
+		} else if (speed == SPEED_100) {
 			if (ecmd->duplex == DUPLEX_FULL)
 				autoneg_advertised = ADVERTISED_100baseT_Full;
 			else
@@ -113,11 +114,6 @@ static int atl1c_set_settings(struct net_device *netdev,
 	return 0;
 }
 
-static u32 atl1c_get_tx_csum(struct net_device *netdev)
-{
-	return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
 static u32 atl1c_get_msglevel(struct net_device *netdev)
 {
 	struct atl1c_adapter *adapter = netdev_priv(netdev);
@@ -307,9 +303,6 @@ static const struct ethtool_ops atl1c_ethtool_ops = {
 	.get_link               = ethtool_op_get_link,
 	.get_eeprom_len         = atl1c_get_eeprom_len,
 	.get_eeprom             = atl1c_get_eeprom,
-	.get_tx_csum            = atl1c_get_tx_csum,
-	.get_sg                 = ethtool_op_get_sg,
-	.set_sg                 = ethtool_op_set_sg,
 };
 
 void atl1c_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 7d9d5067a65..1269ba5d6e5 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -325,7 +325,7 @@ static void atl1c_link_chg_event(struct atl1c_adapter *adapter)
 		}
 	}
 
-	adapter->work_event |= ATL1C_WORK_EVENT_LINK_CHANGE;
+	set_bit(ATL1C_WORK_EVENT_LINK_CHANGE, &adapter->work_event);
 	schedule_work(&adapter->common_task);
 }
 
@@ -337,20 +337,16 @@ static void atl1c_common_task(struct work_struct *work)
 	adapter = container_of(work, struct atl1c_adapter, common_task);
 	netdev = adapter->netdev;
 
-	if (adapter->work_event & ATL1C_WORK_EVENT_RESET) {
-		adapter->work_event &= ~ATL1C_WORK_EVENT_RESET;
+	if (test_and_clear_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event)) {
 		netif_device_detach(netdev);
 		atl1c_down(adapter);
 		atl1c_up(adapter);
 		netif_device_attach(netdev);
-		return;
 	}
 
-	if (adapter->work_event & ATL1C_WORK_EVENT_LINK_CHANGE) {
-		adapter->work_event &= ~ATL1C_WORK_EVENT_LINK_CHANGE;
+	if (test_and_clear_bit(ATL1C_WORK_EVENT_LINK_CHANGE,
+		&adapter->work_event))
 		atl1c_check_link_status(adapter);
-	}
-	return;
 }
 
 
@@ -369,7 +365,7 @@ static void atl1c_tx_timeout(struct net_device *netdev)
 	struct atl1c_adapter *adapter = netdev_priv(netdev);
 
 	/* Do the reset outside of interrupt context */
-	adapter->work_event |= ATL1C_WORK_EVENT_RESET;
+	set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event);
 	schedule_work(&adapter->common_task);
 }
 
@@ -484,6 +480,15 @@ static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter,
 	adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ?
 		roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE;
 }
+
+static u32 atl1c_fix_features(struct net_device *netdev, u32 features)
+{
+	if (netdev->mtu > MAX_TSO_FRAME_SIZE)
+		features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+
+	return features;
+}
+
 /*
  * atl1c_change_mtu - Change the Maximum Transfer Unit
  * @netdev: network interface device structure
@@ -510,14 +515,8 @@ static int atl1c_change_mtu(struct net_device *netdev, int new_mtu)
 		netdev->mtu = new_mtu;
 		adapter->hw.max_frame_size = new_mtu;
 		atl1c_set_rxbufsize(adapter, netdev);
-		if (new_mtu > MAX_TSO_FRAME_SIZE) {
-			adapter->netdev->features &= ~NETIF_F_TSO;
-			adapter->netdev->features &= ~NETIF_F_TSO6;
-		} else {
-			adapter->netdev->features |= NETIF_F_TSO;
-			adapter->netdev->features |= NETIF_F_TSO6;
-		}
 		atl1c_down(adapter);
+		netdev_update_features(netdev);
 		atl1c_up(adapter);
 		clear_bit(__AT_RESETTING, &adapter->flags);
 		if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
@@ -1092,10 +1091,8 @@ static void atl1c_configure_tx(struct atl1c_adapter *adapter)
 	u32 max_pay_load;
 	u16 tx_offload_thresh;
 	u32 txq_ctrl_data;
-	u32 extra_size = 0;     /* Jumbo frame threshold in QWORD unit */
 	u32 max_pay_load_data;
 
-	extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN;
 	tx_offload_thresh = MAX_TX_OFFLOAD_THRESH;
 	AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH,
 		(tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK);
@@ -2540,6 +2537,7 @@ static int atl1c_suspend(struct device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int atl1c_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -2566,6 +2564,7 @@ static int atl1c_resume(struct device *dev)
 
 	return 0;
 }
+#endif
 
 static void atl1c_shutdown(struct pci_dev *pdev)
 {
@@ -2585,6 +2584,7 @@ static const struct net_device_ops atl1c_netdev_ops = {
 	.ndo_set_mac_address 	= atl1c_set_mac_addr,
 	.ndo_set_multicast_list = atl1c_set_multi,
 	.ndo_change_mtu		= atl1c_change_mtu,
+	.ndo_fix_features	= atl1c_fix_features,
 	.ndo_do_ioctl		= atl1c_ioctl,
 	.ndo_tx_timeout		= atl1c_tx_timeout,
 	.ndo_get_stats		= atl1c_get_stats,
@@ -2605,12 +2605,13 @@ static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
 	atl1c_set_ethtool_ops(netdev);
 
 	/* TODO: add when ready */
-	netdev->features =	NETIF_F_SG	   |
+	netdev->hw_features =	NETIF_F_SG	   |
 				NETIF_F_HW_CSUM	   |
 				NETIF_F_HW_VLAN_TX |
-				NETIF_F_HW_VLAN_RX |
 				NETIF_F_TSO	   |
 				NETIF_F_TSO6;
+	netdev->features =	netdev->hw_features |
+				NETIF_F_HW_VLAN_RX;
 	return 0;
 }
 
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index 1209297433b..6269438d365 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -51,13 +51,13 @@ static int atl1e_get_settings(struct net_device *netdev,
 	ecmd->transceiver = XCVR_INTERNAL;
 
 	if (adapter->link_speed != SPEED_0) {
-		ecmd->speed = adapter->link_speed;
+		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 		if (adapter->link_duplex == FULL_DUPLEX)
 			ecmd->duplex = DUPLEX_FULL;
 		else
 			ecmd->duplex = DUPLEX_HALF;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -382,9 +382,6 @@ static const struct ethtool_ops atl1e_ethtool_ops = {
 	.get_eeprom_len         = atl1e_get_eeprom_len,
 	.get_eeprom             = atl1e_get_eeprom,
 	.set_eeprom             = atl1e_set_eeprom,
-	.set_tx_csum            = ethtool_op_set_tx_hw_csum,
-	.set_sg                 = ethtool_op_set_sg,
-	.set_tso                = ethtool_op_set_tso,
 };
 
 void atl1e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 1ff001a8270..86a91228313 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -691,10 +691,8 @@ static void atl1e_cal_ring_size(struct atl1e_adapter *adapter, u32 *ring_size)
 
 static void atl1e_init_ring_resources(struct atl1e_adapter *adapter)
 {
-	struct atl1e_tx_ring *tx_ring = NULL;
 	struct atl1e_rx_ring *rx_ring = NULL;
 
-	tx_ring = &adapter->tx_ring;
 	rx_ring = &adapter->rx_ring;
 
 	rx_ring->real_page_size = adapter->rx_ring.page_size
@@ -1927,11 +1925,7 @@ void atl1e_down(struct atl1e_adapter *adapter)
 	 * reschedule our watchdog timer */
 	set_bit(__AT_DOWN, &adapter->flags);
 
-#ifdef NETIF_F_LLTX
 	netif_stop_queue(netdev);
-#else
-	netif_tx_disable(netdev);
-#endif
 
 	/* reset MAC to disable all RX/TX */
 	atl1e_reset_hw(&adapter->hw);
@@ -2223,10 +2217,10 @@ static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
 	netdev->watchdog_timeo = AT_TX_WATCHDOG;
 	atl1e_set_ethtool_ops(netdev);
 
-	netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM |
-		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-	netdev->features |= NETIF_F_LLTX;
-	netdev->features |= NETIF_F_TSO;
+	netdev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO |
+		NETIF_F_HW_VLAN_TX;
+	netdev->features = netdev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_LLTX;
 
 	return 0;
 }
@@ -2509,7 +2503,7 @@ static struct pci_driver atl1e_driver = {
 	.id_table = atl1e_pci_tbl,
 	.probe    = atl1e_probe,
 	.remove   = __devexit_p(atl1e_remove),
-	/* Power Managment Hooks */
+	/* Power Management Hooks */
 #ifdef CONFIG_PM
 	.suspend  = atl1e_suspend,
 	.resume   = atl1e_resume,
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 67f40b9c16e..c5298d1ab74 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2074,9 +2074,6 @@ static void atl1_intr_tx(struct atl1_adapter *adapter)
 	cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
 
 	while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
-		struct tx_packet_desc *tpd;
-
-		tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
 		buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
 		if (buffer_info->dma) {
 			pci_unmap_page(adapter->pdev, buffer_info->dma,
@@ -2572,7 +2569,7 @@ static s32 atl1_up(struct atl1_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	int err;
-	int irq_flags = IRQF_SAMPLE_RANDOM;
+	int irq_flags = 0;
 
 	/* hardware has been reset, we need to reload some things */
 	atlx_set_multi(netdev);
@@ -2986,6 +2983,11 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
 	netdev->features |= NETIF_F_SG;
 	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
 
+	netdev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_TSO;
+
+	/* is this valid? see atl1_setup_mac_ctrl() */
+	netdev->features |= NETIF_F_RXCSUM;
+
 	/*
 	 * patch for some L1 of old version,
 	 * the final version of L1 may not need these
@@ -3229,13 +3231,13 @@ static int atl1_get_settings(struct net_device *netdev,
 	if (netif_carrier_ok(adapter->netdev)) {
 		u16 link_speed, link_duplex;
 		atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
-		ecmd->speed = link_speed;
+		ethtool_cmd_speed_set(ecmd, link_speed);
 		if (link_duplex == FULL_DUPLEX)
 			ecmd->duplex = DUPLEX_FULL;
 		else
 			ecmd->duplex = DUPLEX_HALF;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
@@ -3266,7 +3268,8 @@ static int atl1_set_settings(struct net_device *netdev,
 	if (ecmd->autoneg == AUTONEG_ENABLE)
 		hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
 	else {
-		if (ecmd->speed == SPEED_1000) {
+		u32 speed = ethtool_cmd_speed(ecmd);
+		if (speed == SPEED_1000) {
 			if (ecmd->duplex != DUPLEX_FULL) {
 				if (netif_msg_link(adapter))
 					dev_warn(&adapter->pdev->dev,
@@ -3275,7 +3278,7 @@ static int atl1_set_settings(struct net_device *netdev,
 				goto exit_sset;
 			}
 			hw->media_type = MEDIA_TYPE_1000M_FULL;
-		} else if (ecmd->speed == SPEED_100) {
+		} else if (speed == SPEED_100) {
 			if (ecmd->duplex == DUPLEX_FULL)
 				hw->media_type = MEDIA_TYPE_100M_FULL;
 			else
@@ -3595,12 +3598,6 @@ static int atl1_set_pauseparam(struct net_device *netdev,
 	return 0;
 }
 
-/* FIXME: is this right? -- CHS */
-static u32 atl1_get_rx_csum(struct net_device *netdev)
-{
-	return 1;
-}
-
 static void atl1_get_strings(struct net_device *netdev, u32 stringset,
 	u8 *data)
 {
@@ -3668,13 +3665,9 @@ static const struct ethtool_ops atl1_ethtool_ops = {
 	.set_ringparam		= atl1_set_ringparam,
 	.get_pauseparam		= atl1_get_pauseparam,
 	.set_pauseparam		= atl1_set_pauseparam,
-	.get_rx_csum		= atl1_get_rx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_hw_csum,
 	.get_link		= ethtool_op_get_link,
-	.set_sg			= ethtool_op_set_sg,
 	.get_strings		= atl1_get_strings,
 	.nway_reset		= atl1_nway_reset,
 	.get_ethtool_stats	= atl1_get_ethtool_stats,
 	.get_sset_count		= atl1_get_sset_count,
-	.set_tso		= ethtool_op_set_tso,
 };
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index 937ef1afa5d..16249e9b6b9 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -1411,9 +1411,8 @@ static int __devinit atl2_probe(struct pci_dev *pdev,
 
 	err = -EIO;
 
-#ifdef NETIF_F_HW_VLAN_TX
+	netdev->hw_features = NETIF_F_SG;
 	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
-#endif
 
 	/* Init PHY as early as possible due to power saving issue  */
 	atl2_phy_init(&adapter->hw);
@@ -1701,7 +1700,7 @@ static struct pci_driver atl2_driver = {
 	.id_table = atl2_pci_tbl,
 	.probe    = atl2_probe,
 	.remove   = __devexit_p(atl2_remove),
-	/* Power Managment Hooks */
+	/* Power Management Hooks */
 	.suspend  = atl2_suspend,
 #ifdef CONFIG_PM
 	.resume   = atl2_resume,
@@ -1770,13 +1769,13 @@ static int atl2_get_settings(struct net_device *netdev,
 	ecmd->transceiver = XCVR_INTERNAL;
 
 	if (adapter->link_speed != SPEED_0) {
-		ecmd->speed = adapter->link_speed;
+		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 		if (adapter->link_duplex == FULL_DUPLEX)
 			ecmd->duplex = DUPLEX_FULL;
 		else
 			ecmd->duplex = DUPLEX_HALF;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -1840,11 +1839,6 @@ static int atl2_set_settings(struct net_device *netdev,
 	return 0;
 }
 
-static u32 atl2_get_tx_csum(struct net_device *netdev)
-{
-	return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
 static u32 atl2_get_msglevel(struct net_device *netdev)
 {
 	return 0;
@@ -2112,12 +2106,6 @@ static const struct ethtool_ops atl2_ethtool_ops = {
 	.get_eeprom_len		= atl2_get_eeprom_len,
 	.get_eeprom		= atl2_get_eeprom,
 	.set_eeprom		= atl2_set_eeprom,
-	.get_tx_csum		= atl2_get_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
-#ifdef NETIF_F_TSO
-	.get_tso		= ethtool_op_get_tso,
-#endif
 };
 
 static void atl2_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 2e2b76258ab..a69331e06b8 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1807,8 +1807,8 @@ static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	if (bp->flags & B44_FLAG_ADV_100FULL)
 		cmd->advertising |= ADVERTISED_100baseT_Full;
 	cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
-	cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
-		SPEED_100 : SPEED_10;
+	ethtool_cmd_speed_set(cmd, ((bp->flags & B44_FLAG_100_BASE_T) ?
+				    SPEED_100 : SPEED_10));
 	cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
 		DUPLEX_FULL : DUPLEX_HALF;
 	cmd->port = 0;
@@ -1820,7 +1820,7 @@ static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	if (cmd->autoneg == AUTONEG_ENABLE)
 		cmd->advertising |= ADVERTISED_Autoneg;
 	if (!netif_running(dev)){
-		cmd->speed = 0;
+		ethtool_cmd_speed_set(cmd, 0);
 		cmd->duplex = 0xff;
 	}
 	cmd->maxtxpkt = 0;
@@ -1831,6 +1831,7 @@ static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct b44 *bp = netdev_priv(dev);
+	u32 speed = ethtool_cmd_speed(cmd);
 
 	/* We do not support gigabit. */
 	if (cmd->autoneg == AUTONEG_ENABLE) {
@@ -1838,8 +1839,8 @@ static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		    (ADVERTISED_1000baseT_Half |
 		     ADVERTISED_1000baseT_Full))
 			return -EINVAL;
-	} else if ((cmd->speed != SPEED_100 &&
-		    cmd->speed != SPEED_10) ||
+	} else if ((speed != SPEED_100 &&
+		    speed != SPEED_10) ||
 		   (cmd->duplex != DUPLEX_HALF &&
 		    cmd->duplex != DUPLEX_FULL)) {
 			return -EINVAL;
@@ -1873,7 +1874,7 @@ static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	} else {
 		bp->flags |= B44_FLAG_FORCE_LINK;
 		bp->flags &= ~(B44_FLAG_100_BASE_T | B44_FLAG_FULL_DUPLEX);
-		if (cmd->speed == SPEED_100)
+		if (speed == SPEED_100)
 			bp->flags |= B44_FLAG_100_BASE_T;
 		if (cmd->duplex == DUPLEX_FULL)
 			bp->flags |= B44_FLAG_FULL_DUPLEX;
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index e94a966af41..f1573d492e9 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -597,7 +597,7 @@ static int bcm_enet_set_mac_address(struct net_device *dev, void *p)
 }
 
 /*
- * Change rx mode (promiscous/allmulti) and update multicast list
+ * Change rx mode (promiscuous/allmulti) and update multicast list
  */
 static void bcm_enet_set_multicast_list(struct net_device *dev)
 {
@@ -839,8 +839,8 @@ static int bcm_enet_open(struct net_device *dev)
 	if (ret)
 		goto out_phy_disconnect;
 
-	ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
-			  IRQF_SAMPLE_RANDOM | IRQF_DISABLED, dev->name, dev);
+	ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, IRQF_DISABLED,
+			  dev->name, dev);
 	if (ret)
 		goto out_freeirq;
 
@@ -1346,7 +1346,8 @@ static int bcm_enet_get_settings(struct net_device *dev,
 		return phy_ethtool_gset(priv->phydev, cmd);
 	} else {
 		cmd->autoneg = 0;
-		cmd->speed = (priv->force_speed_100) ? SPEED_100 : SPEED_10;
+		ethtool_cmd_speed_set(cmd, ((priv->force_speed_100)
+					    ? SPEED_100 : SPEED_10));
 		cmd->duplex = (priv->force_duplex_full) ?
 			DUPLEX_FULL : DUPLEX_HALF;
 		cmd->supported = ADVERTISED_10baseT_Half  |
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index f803c58b941..a7db870d164 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -49,6 +49,7 @@
 #define OC_DEVICE_ID1		0x700	/* Device Id for BE2 cards */
 #define OC_DEVICE_ID2		0x710	/* Device Id for BE3 cards */
 #define OC_DEVICE_ID3		0xe220	/* Device id for Lancer cards */
+#define OC_DEVICE_ID4           0xe228   /* Device id for VF in Lancer */
 
 static inline char *nic_name(struct pci_dev *pdev)
 {
@@ -58,6 +59,7 @@ static inline char *nic_name(struct pci_dev *pdev)
 	case OC_DEVICE_ID2:
 		return OC_NAME_BE;
 	case OC_DEVICE_ID3:
+	case OC_DEVICE_ID4:
 		return OC_NAME_LANCER;
 	case BE_DEVICE_ID2:
 		return BE3_NAME;
@@ -84,15 +86,14 @@ static inline char *nic_name(struct pci_dev *pdev)
 #define MCC_CQ_LEN		256
 
 #define MAX_RSS_QS		4	/* BE limit is 4 queues/port */
-#define BE_MAX_MSIX_VECTORS	(MAX_RSS_QS + 1 + 1)/* RSS qs + 1 def Rx + Tx */
+#define MAX_RX_QS		(MAX_RSS_QS + 1) /* RSS qs + 1 def Rx */
+#define BE_MAX_MSIX_VECTORS	(MAX_RX_QS + 1)/* RX + TX */
 #define BE_NAPI_WEIGHT		64
 #define MAX_RX_POST 		BE_NAPI_WEIGHT /* Frags posted at a time */
 #define RX_FRAGS_REFILL_WM	(RX_Q_LEN - MAX_RX_POST)
 
 #define FW_VER_LEN		32
 
-#define BE_MAX_VF		32
-
 struct be_dma_mem {
 	void *va;
 	dma_addr_t dma;
@@ -154,7 +155,7 @@ struct be_eq_obj {
 	u16 min_eqd;		/* in usecs */
 	u16 max_eqd;		/* in usecs */
 	u16 cur_eqd;		/* in usecs */
-	u8  msix_vec_idx;
+	u8  eq_idx;
 
 	struct napi_struct napi;
 };
@@ -213,7 +214,7 @@ struct be_rx_stats {
 
 struct be_rx_compl_info {
 	u32 rss_hash;
-	u16 vid;
+	u16 vlan_tag;
 	u16 pkt_size;
 	u16 rxq_idx;
 	u16 mac_id;
@@ -245,6 +246,43 @@ struct be_rx_obj {
 
 struct be_drv_stats {
 	u8 be_on_die_temperature;
+	u64 be_tx_events;
+	u64 eth_red_drops;
+	u64 rx_drops_no_pbuf;
+	u64 rx_drops_no_txpb;
+	u64 rx_drops_no_erx_descr;
+	u64 rx_drops_no_tpre_descr;
+	u64 rx_drops_too_many_frags;
+	u64 rx_drops_invalid_ring;
+	u64 forwarded_packets;
+	u64 rx_drops_mtu;
+	u64 rx_crc_errors;
+	u64 rx_alignment_symbol_errors;
+	u64 rx_pause_frames;
+	u64 rx_priority_pause_frames;
+	u64 rx_control_frames;
+	u64 rx_in_range_errors;
+	u64 rx_out_range_errors;
+	u64 rx_frame_too_long;
+	u64 rx_address_match_errors;
+	u64 rx_dropped_too_small;
+	u64 rx_dropped_too_short;
+	u64 rx_dropped_header_too_small;
+	u64 rx_dropped_tcp_length;
+	u64 rx_dropped_runt;
+	u64 rx_ip_checksum_errs;
+	u64 rx_tcp_checksum_errs;
+	u64 rx_udp_checksum_errs;
+	u64 rx_switched_unicast_packets;
+	u64 rx_switched_multicast_packets;
+	u64 rx_switched_broadcast_packets;
+	u64 tx_pauseframes;
+	u64 tx_priority_pauseframes;
+	u64 tx_controlframes;
+	u64 rxpp_fifo_overflow_drop;
+	u64 rx_input_fifo_overflow_drop;
+	u64 pmem_fifo_overflow_drop;
+	u64 jabber_events;
 };
 
 struct be_vf_cfg {
@@ -276,7 +314,7 @@ struct be_adapter {
 	spinlock_t mcc_cq_lock;
 
 	struct msix_entry msix_entries[BE_MAX_MSIX_VECTORS];
-	bool msix_enabled;
+	u32 num_msix_vec;
 	bool isr_registered;
 
 	/* TX Rings */
@@ -287,11 +325,11 @@ struct be_adapter {
 	u32 cache_line_break[8];
 
 	/* Rx rings */
-	struct be_rx_obj rx_obj[MAX_RSS_QS + 1]; /* one default non-rss Q */
+	struct be_rx_obj rx_obj[MAX_RX_QS];
 	u32 num_rx_qs;
 	u32 big_page_size;	/* Compounded page size shared by rx wrbs */
 
-	u8 msix_vec_next_idx;
+	u8 eq_next_idx;
 	struct be_drv_stats drv_stats;
 
 	struct vlan_group *vlan_grp;
@@ -308,10 +346,10 @@ struct be_adapter {
 	u16 work_counter;
 
 	/* Ethtool knobs and info */
-	bool rx_csum; 		/* BE card must perform rx-checksumming */
 	char fw_ver[FW_VER_LEN];
 	u32 if_handle;		/* Used to configure filtering */
 	u32 pmac_id;		/* MAC addr handle used by BE card */
+	u32 beacon_state;	/* for set_phys_id */
 
 	bool eeh_err;
 	bool link_up;
@@ -334,7 +372,7 @@ struct be_adapter {
 
 	bool be3_native;
 	bool sriov_enabled;
-	struct be_vf_cfg vf_cfg[BE_MAX_VF];
+	struct be_vf_cfg *vf_cfg;
 	u8 is_virtfn;
 	u32 sli_family;
 	u8 hba_port_num;
@@ -347,10 +385,12 @@ struct be_adapter {
 #define BE_GEN2 2
 #define BE_GEN3 3
 
-#define lancer_chip(adapter)		(adapter->pdev->device == OC_DEVICE_ID3)
+#define lancer_chip(adapter)	((adapter->pdev->device == OC_DEVICE_ID3) || \
+				 (adapter->pdev->device == OC_DEVICE_ID4))
 
 extern const struct ethtool_ops be_ethtool_ops;
 
+#define msix_enabled(adapter)		(adapter->num_msix_vec > 0)
 #define tx_stats(adapter)		(&adapter->tx_stats)
 #define rx_stats(rxo)			(&rxo->stats)
 
@@ -455,18 +495,10 @@ static inline u8 is_udp_pkt(struct sk_buff *skb)
 
 static inline void be_check_sriov_fn_type(struct be_adapter *adapter)
 {
-	u8 data;
 	u32 sli_intf;
 
-	if (lancer_chip(adapter)) {
-		pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET,
-								&sli_intf);
-		adapter->is_virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
-	} else {
-		pci_write_config_byte(adapter->pdev, 0xFE, 0xAA);
-		pci_read_config_byte(adapter->pdev, 0xFE, &data);
-		adapter->is_virtfn = (data != 0xAA);
-	}
+	pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET, &sli_intf);
+	adapter->is_virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
 }
 
 static inline void be_vf_eth_addr_generate(struct be_adapter *adapter, u8 *mac)
@@ -482,9 +514,15 @@ static inline void be_vf_eth_addr_generate(struct be_adapter *adapter, u8 *mac)
 	memcpy(mac, adapter->netdev->dev_addr, 3);
 }
 
+static inline bool be_multi_rxq(const struct be_adapter *adapter)
+{
+	return adapter->num_rx_qs > 1;
+}
+
 extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,
 		u16 num_popped);
 extern void be_link_status_update(struct be_adapter *adapter, bool link_up);
 extern void netdev_stats_update(struct be_adapter *adapter);
+extern void be_parse_stats(struct be_adapter *adapter);
 extern int be_load_fw(struct be_adapter *adapter, u8 *func);
 #endif				/* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 5a4a87e7c5e..2463b1c9792 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -71,18 +71,38 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
 	compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
 				CQE_STATUS_COMPL_MASK;
 
-	if ((compl->tag0 == OPCODE_COMMON_WRITE_FLASHROM) &&
+	if (((compl->tag0 == OPCODE_COMMON_WRITE_FLASHROM) ||
+		(compl->tag0 == OPCODE_COMMON_WRITE_OBJECT)) &&
 		(compl->tag1 == CMD_SUBSYSTEM_COMMON)) {
 		adapter->flash_status = compl_status;
 		complete(&adapter->flash_compl);
 	}
 
 	if (compl_status == MCC_STATUS_SUCCESS) {
-		if (compl->tag0 == OPCODE_ETH_GET_STATISTICS) {
-			struct be_cmd_resp_get_stats *resp =
-						adapter->stats_cmd.va;
-			be_dws_le_to_cpu(&resp->hw_stats,
-						sizeof(resp->hw_stats));
+		if (((compl->tag0 == OPCODE_ETH_GET_STATISTICS) ||
+			 (compl->tag0 == OPCODE_ETH_GET_PPORT_STATS)) &&
+			(compl->tag1 == CMD_SUBSYSTEM_ETH)) {
+			if (adapter->generation == BE_GEN3) {
+				if (lancer_chip(adapter)) {
+					struct lancer_cmd_resp_pport_stats
+						*resp = adapter->stats_cmd.va;
+					be_dws_le_to_cpu(&resp->pport_stats,
+						sizeof(resp->pport_stats));
+				} else {
+					struct be_cmd_resp_get_stats_v1 *resp =
+							adapter->stats_cmd.va;
+
+				be_dws_le_to_cpu(&resp->hw_stats,
+							sizeof(resp->hw_stats));
+				}
+			} else {
+				struct be_cmd_resp_get_stats_v0 *resp =
+							adapter->stats_cmd.va;
+
+				be_dws_le_to_cpu(&resp->hw_stats,
+							sizeof(resp->hw_stats));
+			}
+			be_parse_stats(adapter);
 			netdev_stats_update(adapter);
 			adapter->stats_cmd_sent = false;
 		}
@@ -132,7 +152,7 @@ static void be_async_grp5_pvid_state_process(struct be_adapter *adapter,
 		struct be_async_event_grp5_pvid_state *evt)
 {
 	if (evt->enabled)
-		adapter->pvid = evt->tag;
+		adapter->pvid = le16_to_cpu(evt->tag);
 	else
 		adapter->pvid = 0;
 }
@@ -292,12 +312,12 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
 
 		if (msecs > 4000) {
 			dev_err(&adapter->pdev->dev, "mbox poll timed out\n");
-			be_detect_dump_ue(adapter);
+			if (!lancer_chip(adapter))
+				be_detect_dump_ue(adapter);
 			return -1;
 		}
 
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(msecs_to_jiffies(1));
+		msleep(1);
 		msecs++;
 	} while (true);
 
@@ -374,23 +394,25 @@ int be_cmd_POST(struct be_adapter *adapter)
 {
 	u16 stage;
 	int status, timeout = 0;
+	struct device *dev = &adapter->pdev->dev;
 
 	do {
 		status = be_POST_stage_get(adapter, &stage);
 		if (status) {
-			dev_err(&adapter->pdev->dev, "POST error; stage=0x%x\n",
-				stage);
+			dev_err(dev, "POST error; stage=0x%x\n", stage);
 			return -1;
 		} else if (stage != POST_STAGE_ARMFW_RDY) {
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule_timeout(2 * HZ);
+			if (msleep_interruptible(2000)) {
+				dev_err(dev, "Waiting for POST aborted\n");
+				return -EINTR;
+			}
 			timeout += 2;
 		} else {
 			return 0;
 		}
 	} while (timeout < 40);
 
-	dev_err(&adapter->pdev->dev, "POST timeout; stage=0x%x\n", stage);
+	dev_err(dev, "POST timeout; stage=0x%x\n", stage);
 	return -1;
 }
 
@@ -728,8 +750,6 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 	if (lancer_chip(adapter)) {
 		req->hdr.version = 2;
 		req->page_size = 1; /* 1 for 4K */
-		AMAP_SET_BITS(struct amap_cq_context_lancer, coalescwm, ctxt,
-								coalesce_wm);
 		AMAP_SET_BITS(struct amap_cq_context_lancer, nodelay, ctxt,
 								no_delay);
 		AMAP_SET_BITS(struct amap_cq_context_lancer, count, ctxt,
@@ -1074,7 +1094,7 @@ int be_cmd_if_destroy(struct be_adapter *adapter, u32 interface_id, u32 domain)
 int be_cmd_get_stats(struct be_adapter *adapter, struct be_dma_mem *nonemb_cmd)
 {
 	struct be_mcc_wrb *wrb;
-	struct be_cmd_req_get_stats *req;
+	struct be_cmd_req_hdr *hdr;
 	struct be_sge *sge;
 	int status = 0;
 
@@ -1088,14 +1108,62 @@ int be_cmd_get_stats(struct be_adapter *adapter, struct be_dma_mem *nonemb_cmd)
 		status = -EBUSY;
 		goto err;
 	}
-	req = nonemb_cmd->va;
+	hdr = nonemb_cmd->va;
 	sge = nonembedded_sgl(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
+	be_wrb_hdr_prepare(wrb, nonemb_cmd->size, false, 1,
 			OPCODE_ETH_GET_STATISTICS);
 
+	be_cmd_hdr_prepare(hdr, CMD_SUBSYSTEM_ETH,
+		OPCODE_ETH_GET_STATISTICS, nonemb_cmd->size);
+
+	if (adapter->generation == BE_GEN3)
+		hdr->version = 1;
+
+	wrb->tag1 = CMD_SUBSYSTEM_ETH;
+	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+	sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(nonemb_cmd->size);
+
+	be_mcc_notify(adapter);
+	adapter->stats_cmd_sent = true;
+
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+/* Lancer Stats */
+int lancer_cmd_get_pport_stats(struct be_adapter *adapter,
+				struct be_dma_mem *nonemb_cmd)
+{
+
+	struct be_mcc_wrb *wrb;
+	struct lancer_cmd_req_pport_stats *req;
+	struct be_sge *sge;
+	int status = 0;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = nonemb_cmd->va;
+	sge = nonembedded_sgl(wrb);
+
+	be_wrb_hdr_prepare(wrb, nonemb_cmd->size, false, 1,
+			OPCODE_ETH_GET_PPORT_STATS);
+
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
-		OPCODE_ETH_GET_STATISTICS, sizeof(*req));
+			OPCODE_ETH_GET_PPORT_STATS, nonemb_cmd->size);
+
+
+	req->cmd_params.params.pport_num = cpu_to_le16(adapter->port_num);
+	req->cmd_params.params.reset_stats = 0;
+
+	wrb->tag1 = CMD_SUBSYSTEM_ETH;
 	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
 	sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
 	sge->len = cpu_to_le32(nonemb_cmd->size);
@@ -1110,7 +1178,7 @@ err:
 
 /* Uses synchronous mcc */
 int be_cmd_link_status_query(struct be_adapter *adapter,
-			bool *link_up, u8 *mac_speed, u16 *link_speed)
+			bool *link_up, u8 *mac_speed, u16 *link_speed, u32 dom)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_link_status *req;
@@ -1186,6 +1254,116 @@ err:
 	return status;
 }
 
+/* Uses synchronous mcc */
+int be_cmd_get_reg_len(struct be_adapter *adapter, u32 *log_size)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_get_fat *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_MANAGE_FAT);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_MANAGE_FAT, sizeof(*req));
+	req->fat_operation = cpu_to_le32(QUERY_FAT);
+	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_get_fat *resp = embedded_payload(wrb);
+		if (log_size && resp->log_size)
+			*log_size = le32_to_cpu(resp->log_size) -
+					sizeof(u32);
+	}
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+void be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf)
+{
+	struct be_dma_mem get_fat_cmd;
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_get_fat *req;
+	struct be_sge *sge;
+	u32 offset = 0, total_size, buf_size,
+				log_offset = sizeof(u32), payload_len;
+	int status;
+
+	if (buf_len == 0)
+		return;
+
+	total_size = buf_len;
+
+	get_fat_cmd.size = sizeof(struct be_cmd_req_get_fat) + 60*1024;
+	get_fat_cmd.va = pci_alloc_consistent(adapter->pdev,
+			get_fat_cmd.size,
+			&get_fat_cmd.dma);
+	if (!get_fat_cmd.va) {
+		status = -ENOMEM;
+		dev_err(&adapter->pdev->dev,
+		"Memory allocation failure while retrieving FAT data\n");
+		return;
+	}
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	while (total_size) {
+		buf_size = min(total_size, (u32)60*1024);
+		total_size -= buf_size;
+
+		wrb = wrb_from_mccq(adapter);
+		if (!wrb) {
+			status = -EBUSY;
+			goto err;
+		}
+		req = get_fat_cmd.va;
+		sge = nonembedded_sgl(wrb);
+
+		payload_len = sizeof(struct be_cmd_req_get_fat) + buf_size;
+		be_wrb_hdr_prepare(wrb, payload_len, false, 1,
+				OPCODE_COMMON_MANAGE_FAT);
+
+		be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+				OPCODE_COMMON_MANAGE_FAT, payload_len);
+
+		sge->pa_hi = cpu_to_le32(upper_32_bits(get_fat_cmd.dma));
+		sge->pa_lo = cpu_to_le32(get_fat_cmd.dma & 0xFFFFFFFF);
+		sge->len = cpu_to_le32(get_fat_cmd.size);
+
+		req->fat_operation = cpu_to_le32(RETRIEVE_FAT);
+		req->read_log_offset = cpu_to_le32(log_offset);
+		req->read_log_length = cpu_to_le32(buf_size);
+		req->data_buffer_size = cpu_to_le32(buf_size);
+
+		status = be_mcc_notify_wait(adapter);
+		if (!status) {
+			struct be_cmd_resp_get_fat *resp = get_fat_cmd.va;
+			memcpy(buf + offset,
+				resp->data_buffer,
+				resp->read_log_length);
+		} else {
+			dev_err(&adapter->pdev->dev, "FAT Table Retrieve error\n");
+			goto err;
+		}
+		offset += buf_size;
+		log_offset += buf_size;
+	}
+err:
+	pci_free_consistent(adapter->pdev, get_fat_cmd.size,
+			get_fat_cmd.va,
+			get_fat_cmd.dma);
+	spin_unlock_bh(&adapter->mcc_lock);
+}
+
 /* Uses Mbox */
 int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver)
 {
@@ -1293,12 +1471,24 @@ err:
 /* Uses MCC for this command as it may be called in BH context
  * Uses synchronous mcc
  */
-int be_cmd_promiscuous_config(struct be_adapter *adapter, u8 port_num, bool en)
+int be_cmd_promiscuous_config(struct be_adapter *adapter, bool en)
 {
 	struct be_mcc_wrb *wrb;
-	struct be_cmd_req_promiscuous_config *req;
+	struct be_cmd_req_rx_filter *req;
+	struct be_dma_mem promiscous_cmd;
+	struct be_sge *sge;
 	int status;
 
+	memset(&promiscous_cmd, 0, sizeof(struct be_dma_mem));
+	promiscous_cmd.size = sizeof(struct be_cmd_req_rx_filter);
+	promiscous_cmd.va = pci_alloc_consistent(adapter->pdev,
+				promiscous_cmd.size, &promiscous_cmd.dma);
+	if (!promiscous_cmd.va) {
+		dev_err(&adapter->pdev->dev,
+				"Memory allocation failure\n");
+		return -ENOMEM;
+	}
+
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
@@ -1306,32 +1496,36 @@ int be_cmd_promiscuous_config(struct be_adapter *adapter, u8 port_num, bool en)
 		status = -EBUSY;
 		goto err;
 	}
-	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, OPCODE_ETH_PROMISCUOUS);
+	req = promiscous_cmd.va;
+	sge = nonembedded_sgl(wrb);
 
-	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
-		OPCODE_ETH_PROMISCUOUS, sizeof(*req));
-
-	/* In FW versions X.102.149/X.101.487 and later,
-	 * the port setting associated only with the
-	 * issuing pci function will take effect
-	 */
-	if (port_num)
-		req->port1_promiscuous = en;
-	else
-		req->port0_promiscuous = en;
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
+					OPCODE_COMMON_NTWK_RX_FILTER);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			OPCODE_COMMON_NTWK_RX_FILTER, sizeof(*req));
+
+	req->if_id = cpu_to_le32(adapter->if_handle);
+	req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS);
+	if (en)
+		req->if_flags = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS);
+
+	sge->pa_hi = cpu_to_le32(upper_32_bits(promiscous_cmd.dma));
+	sge->pa_lo = cpu_to_le32(promiscous_cmd.dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(promiscous_cmd.size);
 
 	status = be_mcc_notify_wait(adapter);
 
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
+	pci_free_consistent(adapter->pdev, promiscous_cmd.size,
+			promiscous_cmd.va, promiscous_cmd.dma);
 	return status;
 }
 
 /*
  * Uses MCC for this command as it may be called in BH context
- * (mc == NULL) => multicast promiscous
+ * (mc == NULL) => multicast promiscuous
  */
 int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
 		struct net_device *netdev, struct be_dma_mem *mem)
@@ -1608,6 +1802,81 @@ err:
 	return status;
 }
 
+int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
+			u32 data_size, u32 data_offset, const char *obj_name,
+			u32 *data_written, u8 *addn_status)
+{
+	struct be_mcc_wrb *wrb;
+	struct lancer_cmd_req_write_object *req;
+	struct lancer_cmd_resp_write_object *resp;
+	void *ctxt = NULL;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+	adapter->flash_status = 0;
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err_unlock;
+	}
+
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(struct lancer_cmd_req_write_object),
+			true, 1, OPCODE_COMMON_WRITE_OBJECT);
+	wrb->tag1 = CMD_SUBSYSTEM_COMMON;
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+				OPCODE_COMMON_WRITE_OBJECT,
+				sizeof(struct lancer_cmd_req_write_object));
+
+	ctxt = &req->context;
+	AMAP_SET_BITS(struct amap_lancer_write_obj_context,
+			write_length, ctxt, data_size);
+
+	if (data_size == 0)
+		AMAP_SET_BITS(struct amap_lancer_write_obj_context,
+				eof, ctxt, 1);
+	else
+		AMAP_SET_BITS(struct amap_lancer_write_obj_context,
+				eof, ctxt, 0);
+
+	be_dws_cpu_to_le(ctxt, sizeof(req->context));
+	req->write_offset = cpu_to_le32(data_offset);
+	strcpy(req->object_name, obj_name);
+	req->descriptor_count = cpu_to_le32(1);
+	req->buf_len = cpu_to_le32(data_size);
+	req->addr_low = cpu_to_le32((cmd->dma +
+				sizeof(struct lancer_cmd_req_write_object))
+				& 0xFFFFFFFF);
+	req->addr_high = cpu_to_le32(upper_32_bits(cmd->dma +
+				sizeof(struct lancer_cmd_req_write_object)));
+
+	be_mcc_notify(adapter);
+	spin_unlock_bh(&adapter->mcc_lock);
+
+	if (!wait_for_completion_timeout(&adapter->flash_compl,
+			msecs_to_jiffies(12000)))
+		status = -1;
+	else
+		status = adapter->flash_status;
+
+	resp = embedded_payload(wrb);
+	if (!status) {
+		*data_written = le32_to_cpu(resp->actual_write_len);
+	} else {
+		*addn_status = resp->additional_status;
+		status = resp->status;
+	}
+
+	return status;
+
+err_unlock:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
 int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			u32 flash_type, u32 flash_opcode, u32 buf_size)
 {
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 4f254cfaabe..8148cc66cbe 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -186,12 +186,14 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_NTWK_PMAC_ADD			59
 #define OPCODE_COMMON_NTWK_PMAC_DEL			60
 #define OPCODE_COMMON_FUNCTION_RESET			61
+#define OPCODE_COMMON_MANAGE_FAT			68
 #define OPCODE_COMMON_ENABLE_DISABLE_BEACON		69
 #define OPCODE_COMMON_GET_BEACON_STATE			70
 #define OPCODE_COMMON_READ_TRANSRECV_DATA		73
 #define OPCODE_COMMON_GET_PHY_DETAILS			102
 #define OPCODE_COMMON_SET_DRIVER_FUNCTION_CAP		103
 #define OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES	121
+#define OPCODE_COMMON_WRITE_OBJECT			172
 
 #define OPCODE_ETH_RSS_CONFIG				1
 #define OPCODE_ETH_ACPI_CONFIG				2
@@ -202,6 +204,7 @@ struct be_mcc_mailbox {
 #define OPCODE_ETH_TX_DESTROY           		9
 #define OPCODE_ETH_RX_DESTROY           		10
 #define OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG		12
+#define OPCODE_ETH_GET_PPORT_STATS			18
 
 #define OPCODE_LOWLEVEL_HOST_DDR_DMA                    17
 #define OPCODE_LOWLEVEL_LOOPBACK_TEST                   18
@@ -380,6 +383,24 @@ struct be_cmd_resp_cq_create {
 	u16 rsvd0;
 } __packed;
 
+struct be_cmd_req_get_fat {
+	struct be_cmd_req_hdr hdr;
+	u32 fat_operation;
+	u32 read_log_offset;
+	u32 read_log_length;
+	u32 data_buffer_size;
+	u32 data_buffer[1];
+} __packed;
+
+struct be_cmd_resp_get_fat {
+	struct be_cmd_resp_hdr hdr;
+	u32 log_size;
+	u32 read_log_length;
+	u32 rsvd[2];
+	u32 data_buffer[1];
+} __packed;
+
+
 /******************** Create MCCQ ***************************/
 /* Pseudo amap definition in which each bit of the actual structure is defined
  * as a byte: used to calculate offset/shift/mask of each field */
@@ -549,7 +570,7 @@ struct be_cmd_req_if_destroy {
 };
 
 /*************** HW Stats Get **********************************/
-struct be_port_rxf_stats {
+struct be_port_rxf_stats_v0 {
 	u32 rx_bytes_lsd;	/* dword 0*/
 	u32 rx_bytes_msd;	/* dword 1*/
 	u32 rx_total_frames;	/* dword 2*/
@@ -618,8 +639,8 @@ struct be_port_rxf_stats {
 	u32 rx_input_fifo_overflow;	/* dword 65*/
 };
 
-struct be_rxf_stats {
-	struct be_port_rxf_stats port[2];
+struct be_rxf_stats_v0 {
+	struct be_port_rxf_stats_v0 port[2];
 	u32 rx_drops_no_pbuf;	/* dword 132*/
 	u32 rx_drops_no_txpb;	/* dword 133*/
 	u32 rx_drops_no_erx_descr;	/* dword 134*/
@@ -642,36 +663,227 @@ struct be_rxf_stats {
 	u32 rsvd1[6];
 };
 
-struct be_erx_stats {
+struct be_erx_stats_v0 {
 	u32 rx_drops_no_fragments[44];     /* dwordS 0 to 43*/
-	u32 debug_wdma_sent_hold;          /* dword 44*/
-	u32 debug_wdma_pbfree_sent_hold;   /* dword 45*/
-	u32 debug_wdma_zerobyte_pbfree_sent_hold; /* dword 46*/
-	u32 debug_pmem_pbuf_dealloc;       /* dword 47*/
+	u32 rsvd[4];
 };
 
 struct be_pmem_stats {
 	u32 eth_red_drops;
-	u32 rsvd[4];
+	u32 rsvd[5];
 };
 
-struct be_hw_stats {
-	struct be_rxf_stats rxf;
+struct be_hw_stats_v0 {
+	struct be_rxf_stats_v0 rxf;
 	u32 rsvd[48];
-	struct be_erx_stats erx;
+	struct be_erx_stats_v0 erx;
 	struct be_pmem_stats pmem;
 };
 
-struct be_cmd_req_get_stats {
+struct be_cmd_req_get_stats_v0 {
+	struct be_cmd_req_hdr hdr;
+	u8 rsvd[sizeof(struct be_hw_stats_v0)];
+};
+
+struct be_cmd_resp_get_stats_v0 {
+	struct be_cmd_resp_hdr hdr;
+	struct be_hw_stats_v0 hw_stats;
+};
+
+#define make_64bit_val(hi_32, lo_32)	(((u64)hi_32<<32) | lo_32)
+struct lancer_cmd_pport_stats {
+	u32 tx_packets_lo;
+	u32 tx_packets_hi;
+	u32 tx_unicast_packets_lo;
+	u32 tx_unicast_packets_hi;
+	u32 tx_multicast_packets_lo;
+	u32 tx_multicast_packets_hi;
+	u32 tx_broadcast_packets_lo;
+	u32 tx_broadcast_packets_hi;
+	u32 tx_bytes_lo;
+	u32 tx_bytes_hi;
+	u32 tx_unicast_bytes_lo;
+	u32 tx_unicast_bytes_hi;
+	u32 tx_multicast_bytes_lo;
+	u32 tx_multicast_bytes_hi;
+	u32 tx_broadcast_bytes_lo;
+	u32 tx_broadcast_bytes_hi;
+	u32 tx_discards_lo;
+	u32 tx_discards_hi;
+	u32 tx_errors_lo;
+	u32 tx_errors_hi;
+	u32 tx_pause_frames_lo;
+	u32 tx_pause_frames_hi;
+	u32 tx_pause_on_frames_lo;
+	u32 tx_pause_on_frames_hi;
+	u32 tx_pause_off_frames_lo;
+	u32 tx_pause_off_frames_hi;
+	u32 tx_internal_mac_errors_lo;
+	u32 tx_internal_mac_errors_hi;
+	u32 tx_control_frames_lo;
+	u32 tx_control_frames_hi;
+	u32 tx_packets_64_bytes_lo;
+	u32 tx_packets_64_bytes_hi;
+	u32 tx_packets_65_to_127_bytes_lo;
+	u32 tx_packets_65_to_127_bytes_hi;
+	u32 tx_packets_128_to_255_bytes_lo;
+	u32 tx_packets_128_to_255_bytes_hi;
+	u32 tx_packets_256_to_511_bytes_lo;
+	u32 tx_packets_256_to_511_bytes_hi;
+	u32 tx_packets_512_to_1023_bytes_lo;
+	u32 tx_packets_512_to_1023_bytes_hi;
+	u32 tx_packets_1024_to_1518_bytes_lo;
+	u32 tx_packets_1024_to_1518_bytes_hi;
+	u32 tx_packets_1519_to_2047_bytes_lo;
+	u32 tx_packets_1519_to_2047_bytes_hi;
+	u32 tx_packets_2048_to_4095_bytes_lo;
+	u32 tx_packets_2048_to_4095_bytes_hi;
+	u32 tx_packets_4096_to_8191_bytes_lo;
+	u32 tx_packets_4096_to_8191_bytes_hi;
+	u32 tx_packets_8192_to_9216_bytes_lo;
+	u32 tx_packets_8192_to_9216_bytes_hi;
+	u32 tx_lso_packets_lo;
+	u32 tx_lso_packets_hi;
+	u32 rx_packets_lo;
+	u32 rx_packets_hi;
+	u32 rx_unicast_packets_lo;
+	u32 rx_unicast_packets_hi;
+	u32 rx_multicast_packets_lo;
+	u32 rx_multicast_packets_hi;
+	u32 rx_broadcast_packets_lo;
+	u32 rx_broadcast_packets_hi;
+	u32 rx_bytes_lo;
+	u32 rx_bytes_hi;
+	u32 rx_unicast_bytes_lo;
+	u32 rx_unicast_bytes_hi;
+	u32 rx_multicast_bytes_lo;
+	u32 rx_multicast_bytes_hi;
+	u32 rx_broadcast_bytes_lo;
+	u32 rx_broadcast_bytes_hi;
+	u32 rx_unknown_protos;
+	u32 rsvd_69; /* Word 69 is reserved */
+	u32 rx_discards_lo;
+	u32 rx_discards_hi;
+	u32 rx_errors_lo;
+	u32 rx_errors_hi;
+	u32 rx_crc_errors_lo;
+	u32 rx_crc_errors_hi;
+	u32 rx_alignment_errors_lo;
+	u32 rx_alignment_errors_hi;
+	u32 rx_symbol_errors_lo;
+	u32 rx_symbol_errors_hi;
+	u32 rx_pause_frames_lo;
+	u32 rx_pause_frames_hi;
+	u32 rx_pause_on_frames_lo;
+	u32 rx_pause_on_frames_hi;
+	u32 rx_pause_off_frames_lo;
+	u32 rx_pause_off_frames_hi;
+	u32 rx_frames_too_long_lo;
+	u32 rx_frames_too_long_hi;
+	u32 rx_internal_mac_errors_lo;
+	u32 rx_internal_mac_errors_hi;
+	u32 rx_undersize_packets;
+	u32 rx_oversize_packets;
+	u32 rx_fragment_packets;
+	u32 rx_jabbers;
+	u32 rx_control_frames_lo;
+	u32 rx_control_frames_hi;
+	u32 rx_control_frames_unknown_opcode_lo;
+	u32 rx_control_frames_unknown_opcode_hi;
+	u32 rx_in_range_errors;
+	u32 rx_out_of_range_errors;
+	u32 rx_address_match_errors;
+	u32 rx_vlan_mismatch_errors;
+	u32 rx_dropped_too_small;
+	u32 rx_dropped_too_short;
+	u32 rx_dropped_header_too_small;
+	u32 rx_dropped_invalid_tcp_length;
+	u32 rx_dropped_runt;
+	u32 rx_ip_checksum_errors;
+	u32 rx_tcp_checksum_errors;
+	u32 rx_udp_checksum_errors;
+	u32 rx_non_rss_packets;
+	u32 rsvd_111;
+	u32 rx_ipv4_packets_lo;
+	u32 rx_ipv4_packets_hi;
+	u32 rx_ipv6_packets_lo;
+	u32 rx_ipv6_packets_hi;
+	u32 rx_ipv4_bytes_lo;
+	u32 rx_ipv4_bytes_hi;
+	u32 rx_ipv6_bytes_lo;
+	u32 rx_ipv6_bytes_hi;
+	u32 rx_nic_packets_lo;
+	u32 rx_nic_packets_hi;
+	u32 rx_tcp_packets_lo;
+	u32 rx_tcp_packets_hi;
+	u32 rx_iscsi_packets_lo;
+	u32 rx_iscsi_packets_hi;
+	u32 rx_management_packets_lo;
+	u32 rx_management_packets_hi;
+	u32 rx_switched_unicast_packets_lo;
+	u32 rx_switched_unicast_packets_hi;
+	u32 rx_switched_multicast_packets_lo;
+	u32 rx_switched_multicast_packets_hi;
+	u32 rx_switched_broadcast_packets_lo;
+	u32 rx_switched_broadcast_packets_hi;
+	u32 num_forwards_lo;
+	u32 num_forwards_hi;
+	u32 rx_fifo_overflow;
+	u32 rx_input_fifo_overflow;
+	u32 rx_drops_too_many_frags_lo;
+	u32 rx_drops_too_many_frags_hi;
+	u32 rx_drops_invalid_queue;
+	u32 rsvd_141;
+	u32 rx_drops_mtu_lo;
+	u32 rx_drops_mtu_hi;
+	u32 rx_packets_64_bytes_lo;
+	u32 rx_packets_64_bytes_hi;
+	u32 rx_packets_65_to_127_bytes_lo;
+	u32 rx_packets_65_to_127_bytes_hi;
+	u32 rx_packets_128_to_255_bytes_lo;
+	u32 rx_packets_128_to_255_bytes_hi;
+	u32 rx_packets_256_to_511_bytes_lo;
+	u32 rx_packets_256_to_511_bytes_hi;
+	u32 rx_packets_512_to_1023_bytes_lo;
+	u32 rx_packets_512_to_1023_bytes_hi;
+	u32 rx_packets_1024_to_1518_bytes_lo;
+	u32 rx_packets_1024_to_1518_bytes_hi;
+	u32 rx_packets_1519_to_2047_bytes_lo;
+	u32 rx_packets_1519_to_2047_bytes_hi;
+	u32 rx_packets_2048_to_4095_bytes_lo;
+	u32 rx_packets_2048_to_4095_bytes_hi;
+	u32 rx_packets_4096_to_8191_bytes_lo;
+	u32 rx_packets_4096_to_8191_bytes_hi;
+	u32 rx_packets_8192_to_9216_bytes_lo;
+	u32 rx_packets_8192_to_9216_bytes_hi;
+};
+
+struct pport_stats_params {
+	u16 pport_num;
+	u8 rsvd;
+	u8 reset_stats;
+};
+
+struct lancer_cmd_req_pport_stats {
 	struct be_cmd_req_hdr hdr;
-	u8 rsvd[sizeof(struct be_hw_stats)];
+	union {
+		struct pport_stats_params params;
+		u8 rsvd[sizeof(struct lancer_cmd_pport_stats)];
+	} cmd_params;
 };
 
-struct be_cmd_resp_get_stats {
+struct lancer_cmd_resp_pport_stats {
 	struct be_cmd_resp_hdr hdr;
-	struct be_hw_stats hw_stats;
+	struct lancer_cmd_pport_stats pport_stats;
 };
 
+static inline  struct lancer_cmd_pport_stats*
+	pport_stats_from_cmd(struct be_adapter *adapter)
+{
+	struct lancer_cmd_resp_pport_stats *cmd = adapter->stats_cmd.va;
+	return &cmd->pport_stats;
+}
+
 struct be_cmd_req_get_cntl_addnl_attribs {
 	struct be_cmd_req_hdr hdr;
 	u8 rsvd[8];
@@ -695,13 +907,6 @@ struct be_cmd_req_vlan_config {
 	u16 normal_vlan[64];
 } __packed;
 
-struct be_cmd_req_promiscuous_config {
-	struct be_cmd_req_hdr hdr;
-	u8 port0_promiscuous;
-	u8 port1_promiscuous;
-	u16 rsvd0;
-} __packed;
-
 /******************** Multicast MAC Config *******************/
 #define BE_MAX_MC		64 /* set mcast promisc if > 64 */
 struct macaddr {
@@ -716,11 +921,18 @@ struct be_cmd_req_mcast_mac_config {
 	struct macaddr mac[BE_MAX_MC];
 } __packed;
 
-static inline struct be_hw_stats *
-hw_stats_from_cmd(struct be_cmd_resp_get_stats *cmd)
-{
-	return &cmd->hw_stats;
-}
+/******************* RX FILTER ******************************/
+struct be_cmd_req_rx_filter {
+	struct be_cmd_req_hdr hdr;
+	u32 global_flags_mask;
+	u32 global_flags;
+	u32 if_flags_mask;
+	u32 if_flags;
+	u32 if_id;
+	u32 multicast_num;
+	struct macaddr mac[BE_MAX_MC];
+};
+
 
 /******************** Link Status Query *******************/
 struct be_cmd_req_link_status {
@@ -920,6 +1132,36 @@ struct be_cmd_write_flashrom {
 	struct flashrom_params params;
 };
 
+/**************** Lancer Firmware Flash ************/
+struct amap_lancer_write_obj_context {
+	u8 write_length[24];
+	u8 reserved1[7];
+	u8 eof;
+} __packed;
+
+struct lancer_cmd_req_write_object {
+	struct be_cmd_req_hdr hdr;
+	u8 context[sizeof(struct amap_lancer_write_obj_context) / 8];
+	u32 write_offset;
+	u8 object_name[104];
+	u32 descriptor_count;
+	u32 buf_len;
+	u32 addr_low;
+	u32 addr_high;
+};
+
+struct lancer_cmd_resp_write_object {
+	u8 opcode;
+	u8 subsystem;
+	u8 rsvd1[2];
+	u8 status;
+	u8 additional_status;
+	u8 rsvd2[2];
+	u32 resp_len;
+	u32 actual_resp_len;
+	u32 actual_write_len;
+};
+
 /************************ WOL *******************************/
 struct be_cmd_req_acpi_wol_magic_config{
 	struct be_cmd_req_hdr hdr;
@@ -1061,6 +1303,151 @@ struct be_cmd_resp_set_func_cap {
 	u8 rsvd[212];
 };
 
+/*************** HW Stats Get v1 **********************************/
+#define BE_TXP_SW_SZ			48
+struct be_port_rxf_stats_v1 {
+	u32 rsvd0[12];
+	u32 rx_crc_errors;
+	u32 rx_alignment_symbol_errors;
+	u32 rx_pause_frames;
+	u32 rx_priority_pause_frames;
+	u32 rx_control_frames;
+	u32 rx_in_range_errors;
+	u32 rx_out_range_errors;
+	u32 rx_frame_too_long;
+	u32 rx_address_match_errors;
+	u32 rx_dropped_too_small;
+	u32 rx_dropped_too_short;
+	u32 rx_dropped_header_too_small;
+	u32 rx_dropped_tcp_length;
+	u32 rx_dropped_runt;
+	u32 rsvd1[10];
+	u32 rx_ip_checksum_errs;
+	u32 rx_tcp_checksum_errs;
+	u32 rx_udp_checksum_errs;
+	u32 rsvd2[7];
+	u32 rx_switched_unicast_packets;
+	u32 rx_switched_multicast_packets;
+	u32 rx_switched_broadcast_packets;
+	u32 rsvd3[3];
+	u32 tx_pauseframes;
+	u32 tx_priority_pauseframes;
+	u32 tx_controlframes;
+	u32 rsvd4[10];
+	u32 rxpp_fifo_overflow_drop;
+	u32 rx_input_fifo_overflow_drop;
+	u32 pmem_fifo_overflow_drop;
+	u32 jabber_events;
+	u32 rsvd5[3];
+};
+
+
+struct be_rxf_stats_v1 {
+	struct be_port_rxf_stats_v1 port[4];
+	u32 rsvd0[2];
+	u32 rx_drops_no_pbuf;
+	u32 rx_drops_no_txpb;
+	u32 rx_drops_no_erx_descr;
+	u32 rx_drops_no_tpre_descr;
+	u32 rsvd1[6];
+	u32 rx_drops_too_many_frags;
+	u32 rx_drops_invalid_ring;
+	u32 forwarded_packets;
+	u32 rx_drops_mtu;
+	u32 rsvd2[14];
+};
+
+struct be_erx_stats_v1 {
+	u32 rx_drops_no_fragments[68];     /* dwordS 0 to 67*/
+	u32 rsvd[4];
+};
+
+struct be_hw_stats_v1 {
+	struct be_rxf_stats_v1 rxf;
+	u32 rsvd0[BE_TXP_SW_SZ];
+	struct be_erx_stats_v1 erx;
+	struct be_pmem_stats pmem;
+	u32 rsvd1[3];
+};
+
+struct be_cmd_req_get_stats_v1 {
+	struct be_cmd_req_hdr hdr;
+	u8 rsvd[sizeof(struct be_hw_stats_v1)];
+};
+
+struct be_cmd_resp_get_stats_v1 {
+	struct be_cmd_resp_hdr hdr;
+	struct be_hw_stats_v1 hw_stats;
+};
+
+static inline void *
+hw_stats_from_cmd(struct be_adapter *adapter)
+{
+	if (adapter->generation == BE_GEN3) {
+		struct be_cmd_resp_get_stats_v1 *cmd = adapter->stats_cmd.va;
+
+		return &cmd->hw_stats;
+	} else {
+		struct be_cmd_resp_get_stats_v0 *cmd = adapter->stats_cmd.va;
+
+		return &cmd->hw_stats;
+	}
+}
+
+static inline void *be_port_rxf_stats_from_cmd(struct be_adapter *adapter)
+{
+	if (adapter->generation == BE_GEN3) {
+		struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+		struct be_rxf_stats_v1 *rxf_stats = &hw_stats->rxf;
+
+		return &rxf_stats->port[adapter->port_num];
+	} else {
+		struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+		struct be_rxf_stats_v0 *rxf_stats = &hw_stats->rxf;
+
+		return &rxf_stats->port[adapter->port_num];
+	}
+}
+
+static inline void *be_rxf_stats_from_cmd(struct be_adapter *adapter)
+{
+	if (adapter->generation == BE_GEN3) {
+		struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+
+		return &hw_stats->rxf;
+	} else {
+		struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+
+		return &hw_stats->rxf;
+	}
+}
+
+static inline void *be_erx_stats_from_cmd(struct be_adapter *adapter)
+{
+	if (adapter->generation == BE_GEN3) {
+		struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+
+		return &hw_stats->erx;
+	} else {
+		struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+
+		return &hw_stats->erx;
+	}
+}
+
+static inline void *be_pmem_stats_from_cmd(struct be_adapter *adapter)
+{
+	if (adapter->generation == BE_GEN3) {
+		struct be_hw_stats_v1 *hw_stats = hw_stats_from_cmd(adapter);
+
+		return &hw_stats->pmem;
+	} else {
+		struct be_hw_stats_v0 *hw_stats = hw_stats_from_cmd(adapter);
+
+		return &hw_stats->pmem;
+	}
+}
+
 extern int be_pci_fnum_get(struct be_adapter *adapter);
 extern int be_cmd_POST(struct be_adapter *adapter);
 extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -1093,18 +1480,19 @@ extern int be_cmd_rxq_create(struct be_adapter *adapter,
 extern int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 			int type);
 extern int be_cmd_link_status_query(struct be_adapter *adapter,
-			bool *link_up, u8 *mac_speed, u16 *link_speed);
+			bool *link_up, u8 *mac_speed, u16 *link_speed, u32 dom);
 extern int be_cmd_reset(struct be_adapter *adapter);
 extern int be_cmd_get_stats(struct be_adapter *adapter,
 			struct be_dma_mem *nonemb_cmd);
+extern int lancer_cmd_get_pport_stats(struct be_adapter *adapter,
+			struct be_dma_mem *nonemb_cmd);
 extern int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver);
 
 extern int be_cmd_modify_eqd(struct be_adapter *adapter, u32 eq_id, u32 eqd);
 extern int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id,
 			u16 *vtag_array, u32 num, bool untagged,
 			bool promiscuous);
-extern int be_cmd_promiscuous_config(struct be_adapter *adapter,
-			u8 port_num, bool en);
+extern int be_cmd_promiscuous_config(struct be_adapter *adapter, bool en);
 extern int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
 			struct net_device *netdev, struct be_dma_mem *mem);
 extern int be_cmd_set_flow_control(struct be_adapter *adapter,
@@ -1124,6 +1512,11 @@ extern int be_cmd_get_beacon_state(struct be_adapter *adapter,
 extern int be_cmd_write_flashrom(struct be_adapter *adapter,
 			struct be_dma_mem *cmd, u32 flash_oper,
 			u32 flash_opcode, u32 buf_size);
+extern int lancer_cmd_write_object(struct be_adapter *adapter,
+				struct be_dma_mem *cmd,
+				u32 data_size, u32 data_offset,
+				const char *obj_name,
+				u32 *data_written, u8 *addn_status);
 int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
 				int offset);
 extern int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
@@ -1148,4 +1541,6 @@ extern void be_detect_dump_ue(struct be_adapter *adapter);
 extern int be_cmd_get_die_temperature(struct be_adapter *adapter);
 extern int be_cmd_get_cntl_attributes(struct be_adapter *adapter);
 extern int be_cmd_check_native_mode(struct be_adapter *adapter);
+extern int be_cmd_get_reg_len(struct be_adapter *adapter, u32 *log_size);
+extern void be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf);
 
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index aac248fbd18..facfe3ca5c4 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -26,8 +26,8 @@ struct be_ethtool_stat {
 	int offset;
 };
 
-enum {NETSTAT, PORTSTAT, MISCSTAT, DRVSTAT_TX, DRVSTAT_RX, ERXSTAT,
-			PMEMSTAT, DRVSTAT};
+enum {NETSTAT, DRVSTAT_TX, DRVSTAT_RX, ERXSTAT,
+			DRVSTAT};
 #define FIELDINFO(_struct, field) FIELD_SIZEOF(_struct, field), \
 					offsetof(_struct, field)
 #define NETSTAT_INFO(field) 	#field, NETSTAT,\
@@ -37,15 +37,8 @@ enum {NETSTAT, PORTSTAT, MISCSTAT, DRVSTAT_TX, DRVSTAT_RX, ERXSTAT,
 					FIELDINFO(struct be_tx_stats, field)
 #define DRVSTAT_RX_INFO(field)	#field, DRVSTAT_RX,\
 					FIELDINFO(struct be_rx_stats, field)
-#define MISCSTAT_INFO(field) 	#field, MISCSTAT,\
-					FIELDINFO(struct be_rxf_stats, field)
-#define PORTSTAT_INFO(field) 	#field, PORTSTAT,\
-					FIELDINFO(struct be_port_rxf_stats, \
-						field)
-#define ERXSTAT_INFO(field) 	#field, ERXSTAT,\
-					FIELDINFO(struct be_erx_stats, field)
-#define PMEMSTAT_INFO(field) 	#field, PMEMSTAT,\
-					FIELDINFO(struct be_pmem_stats, field)
+#define ERXSTAT_INFO(field)	#field, ERXSTAT,\
+					FIELDINFO(struct be_erx_stats_v1, field)
 #define	DRVSTAT_INFO(field)	#field, DRVSTAT,\
 					FIELDINFO(struct be_drv_stats, \
 						field)
@@ -65,50 +58,41 @@ static const struct be_ethtool_stat et_stats[] = {
 	{DRVSTAT_TX_INFO(be_tx_stops)},
 	{DRVSTAT_TX_INFO(be_tx_events)},
 	{DRVSTAT_TX_INFO(be_tx_compl)},
-	{PORTSTAT_INFO(rx_unicast_frames)},
-	{PORTSTAT_INFO(rx_multicast_frames)},
-	{PORTSTAT_INFO(rx_broadcast_frames)},
-	{PORTSTAT_INFO(rx_crc_errors)},
-	{PORTSTAT_INFO(rx_alignment_symbol_errors)},
-	{PORTSTAT_INFO(rx_pause_frames)},
-	{PORTSTAT_INFO(rx_control_frames)},
-	{PORTSTAT_INFO(rx_in_range_errors)},
-	{PORTSTAT_INFO(rx_out_range_errors)},
-	{PORTSTAT_INFO(rx_frame_too_long)},
-	{PORTSTAT_INFO(rx_address_match_errors)},
-	{PORTSTAT_INFO(rx_vlan_mismatch)},
-	{PORTSTAT_INFO(rx_dropped_too_small)},
-	{PORTSTAT_INFO(rx_dropped_too_short)},
-	{PORTSTAT_INFO(rx_dropped_header_too_small)},
-	{PORTSTAT_INFO(rx_dropped_tcp_length)},
-	{PORTSTAT_INFO(rx_dropped_runt)},
-	{PORTSTAT_INFO(rx_fifo_overflow)},
-	{PORTSTAT_INFO(rx_input_fifo_overflow)},
-	{PORTSTAT_INFO(rx_ip_checksum_errs)},
-	{PORTSTAT_INFO(rx_tcp_checksum_errs)},
-	{PORTSTAT_INFO(rx_udp_checksum_errs)},
-	{PORTSTAT_INFO(rx_non_rss_packets)},
-	{PORTSTAT_INFO(rx_ipv4_packets)},
-	{PORTSTAT_INFO(rx_ipv6_packets)},
-	{PORTSTAT_INFO(rx_switched_unicast_packets)},
-	{PORTSTAT_INFO(rx_switched_multicast_packets)},
-	{PORTSTAT_INFO(rx_switched_broadcast_packets)},
-	{PORTSTAT_INFO(tx_unicastframes)},
-	{PORTSTAT_INFO(tx_multicastframes)},
-	{PORTSTAT_INFO(tx_broadcastframes)},
-	{PORTSTAT_INFO(tx_pauseframes)},
-	{PORTSTAT_INFO(tx_controlframes)},
-	{MISCSTAT_INFO(rx_drops_no_pbuf)},
-	{MISCSTAT_INFO(rx_drops_no_txpb)},
-	{MISCSTAT_INFO(rx_drops_no_erx_descr)},
-	{MISCSTAT_INFO(rx_drops_no_tpre_descr)},
-	{MISCSTAT_INFO(rx_drops_too_many_frags)},
-	{MISCSTAT_INFO(rx_drops_invalid_ring)},
-	{MISCSTAT_INFO(forwarded_packets)},
-	{MISCSTAT_INFO(rx_drops_mtu)},
-	{MISCSTAT_INFO(port0_jabber_events)},
-	{MISCSTAT_INFO(port1_jabber_events)},
-	{PMEMSTAT_INFO(eth_red_drops)},
+	{DRVSTAT_INFO(rx_crc_errors)},
+	{DRVSTAT_INFO(rx_alignment_symbol_errors)},
+	{DRVSTAT_INFO(rx_pause_frames)},
+	{DRVSTAT_INFO(rx_control_frames)},
+	{DRVSTAT_INFO(rx_in_range_errors)},
+	{DRVSTAT_INFO(rx_out_range_errors)},
+	{DRVSTAT_INFO(rx_frame_too_long)},
+	{DRVSTAT_INFO(rx_address_match_errors)},
+	{DRVSTAT_INFO(rx_dropped_too_small)},
+	{DRVSTAT_INFO(rx_dropped_too_short)},
+	{DRVSTAT_INFO(rx_dropped_header_too_small)},
+	{DRVSTAT_INFO(rx_dropped_tcp_length)},
+	{DRVSTAT_INFO(rx_dropped_runt)},
+	{DRVSTAT_INFO(rxpp_fifo_overflow_drop)},
+	{DRVSTAT_INFO(rx_input_fifo_overflow_drop)},
+	{DRVSTAT_INFO(rx_ip_checksum_errs)},
+	{DRVSTAT_INFO(rx_tcp_checksum_errs)},
+	{DRVSTAT_INFO(rx_udp_checksum_errs)},
+	{DRVSTAT_INFO(rx_switched_unicast_packets)},
+	{DRVSTAT_INFO(rx_switched_multicast_packets)},
+	{DRVSTAT_INFO(rx_switched_broadcast_packets)},
+	{DRVSTAT_INFO(tx_pauseframes)},
+	{DRVSTAT_INFO(tx_controlframes)},
+	{DRVSTAT_INFO(rx_priority_pause_frames)},
+	{DRVSTAT_INFO(pmem_fifo_overflow_drop)},
+	{DRVSTAT_INFO(jabber_events)},
+	{DRVSTAT_INFO(rx_drops_no_pbuf)},
+	{DRVSTAT_INFO(rx_drops_no_txpb)},
+	{DRVSTAT_INFO(rx_drops_no_erx_descr)},
+	{DRVSTAT_INFO(rx_drops_no_tpre_descr)},
+	{DRVSTAT_INFO(rx_drops_too_many_frags)},
+	{DRVSTAT_INFO(rx_drops_invalid_ring)},
+	{DRVSTAT_INFO(forwarded_packets)},
+	{DRVSTAT_INFO(rx_drops_mtu)},
+	{DRVSTAT_INFO(eth_red_drops)},
 	{DRVSTAT_INFO(be_on_die_temperature)}
 };
 #define ETHTOOL_STATS_NUM ARRAY_SIZE(et_stats)
@@ -156,6 +140,29 @@ be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
 }
 
 static int
+be_get_reg_len(struct net_device *netdev)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	u32 log_size = 0;
+
+	if (be_physfn(adapter))
+		be_cmd_get_reg_len(adapter, &log_size);
+
+	return log_size;
+}
+
+static void
+be_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *buf)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	if (be_physfn(adapter)) {
+		memset(buf, 0, regs->len);
+		be_cmd_get_regs(adapter, regs->len, buf);
+	}
+}
+
+static int
 be_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
@@ -186,9 +193,9 @@ be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
 	struct be_rx_obj *rxo;
 	struct be_eq_obj *rx_eq;
 	struct be_eq_obj *tx_eq = &adapter->tx_eq;
-	u32 tx_max, tx_min, tx_cur;
 	u32 rx_max, rx_min, rx_cur;
 	int status = 0, i;
+	u32 tx_cur;
 
 	if (coalesce->use_adaptive_tx_coalesce == 1)
 		return -EINVAL;
@@ -227,8 +234,6 @@ be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
 		}
 	}
 
-	tx_max = coalesce->tx_coalesce_usecs_high;
-	tx_min = coalesce->tx_coalesce_usecs_low;
 	tx_cur = coalesce->tx_coalesce_usecs;
 
 	if (tx_cur > BE_MAX_EQD)
@@ -242,32 +247,11 @@ be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
 	return 0;
 }
 
-static u32 be_get_rx_csum(struct net_device *netdev)
-{
-	struct be_adapter *adapter = netdev_priv(netdev);
-
-	return adapter->rx_csum;
-}
-
-static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
-	struct be_adapter *adapter = netdev_priv(netdev);
-
-	if (data)
-		adapter->rx_csum = true;
-	else
-		adapter->rx_csum = false;
-
-	return 0;
-}
-
 static void
 be_get_ethtool_stats(struct net_device *netdev,
 		struct ethtool_stats *stats, uint64_t *data)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
-	struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats_cmd.va);
-	struct be_erx_stats *erx_stats = &hw_stats->erx;
 	struct be_rx_obj *rxo;
 	void *p = NULL;
 	int i, j;
@@ -280,15 +264,6 @@ be_get_ethtool_stats(struct net_device *netdev,
 		case DRVSTAT_TX:
 			p = &adapter->tx_stats;
 			break;
-		case PORTSTAT:
-			p = &hw_stats->rxf.port[adapter->port_num];
-			break;
-		case MISCSTAT:
-			p = &hw_stats->rxf;
-			break;
-		case PMEMSTAT:
-			p = &hw_stats->pmem;
-			break;
 		case DRVSTAT:
 			p = &adapter->drv_stats;
 			break;
@@ -306,7 +281,8 @@ be_get_ethtool_stats(struct net_device *netdev,
 				p = (u8 *)&rxo->stats + et_rx_stats[i].offset;
 				break;
 			case ERXSTAT:
-				p = (u32 *)erx_stats + rxo->q.id;
+				p = (u32 *)be_erx_stats_from_cmd(adapter) +
+								rxo->q.id;
 				break;
 			}
 			data[ETHTOOL_STATS_NUM + j * ETHTOOL_RXSTATS_NUM + i] =
@@ -374,19 +350,28 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 
 	if ((adapter->link_speed < 0) || (!(netdev->flags & IFF_UP))) {
 		status = be_cmd_link_status_query(adapter, &link_up,
-						&mac_speed, &link_speed);
+						&mac_speed, &link_speed, 0);
 
 		be_link_status_update(adapter, link_up);
 		/* link_speed is in units of 10 Mbps */
 		if (link_speed) {
-			ecmd->speed = link_speed*10;
+			ethtool_cmd_speed_set(ecmd, link_speed*10);
 		} else {
 			switch (mac_speed) {
+			case PHY_LINK_SPEED_10MBPS:
+				ethtool_cmd_speed_set(ecmd, SPEED_10);
+				break;
+			case PHY_LINK_SPEED_100MBPS:
+				ethtool_cmd_speed_set(ecmd, SPEED_100);
+				break;
 			case PHY_LINK_SPEED_1GBPS:
-				ecmd->speed = SPEED_1000;
+				ethtool_cmd_speed_set(ecmd, SPEED_1000);
 				break;
 			case PHY_LINK_SPEED_10GBPS:
-				ecmd->speed = SPEED_10000;
+				ethtool_cmd_speed_set(ecmd, SPEED_10000);
+				break;
+			case PHY_LINK_SPEED_ZERO:
+				ethtool_cmd_speed_set(ecmd, 0);
 				break;
 			}
 		}
@@ -429,14 +414,14 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 		}
 
 		/* Save for future use */
-		adapter->link_speed = ecmd->speed;
+		adapter->link_speed = ethtool_cmd_speed(ecmd);
 		adapter->port_type = ecmd->port;
 		adapter->transceiver = ecmd->transceiver;
 		adapter->autoneg = ecmd->autoneg;
 		dma_free_coherent(&adapter->pdev->dev, phy_cmd.size, phy_cmd.va,
 				  phy_cmd.dma);
 	} else {
-		ecmd->speed = adapter->link_speed;
+		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 		ecmd->port = adapter->port_type;
 		ecmd->transceiver = adapter->transceiver;
 		ecmd->autoneg = adapter->autoneg;
@@ -507,29 +492,33 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
 }
 
 static int
-be_phys_id(struct net_device *netdev, u32 data)
+be_set_phys_id(struct net_device *netdev,
+	       enum ethtool_phys_id_state state)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
-	int status;
-	u32 cur;
-
-	be_cmd_get_beacon_state(adapter, adapter->hba_port_num, &cur);
 
-	if (cur == BEACON_STATE_ENABLED)
-		return 0;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		be_cmd_get_beacon_state(adapter, adapter->hba_port_num,
+					&adapter->beacon_state);
+		return 1;	/* cycle on/off once per second */
 
-	if (data < 2)
-		data = 2;
+	case ETHTOOL_ID_ON:
+		be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
+					BEACON_STATE_ENABLED);
+		break;
 
-	status = be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
-			BEACON_STATE_ENABLED);
-	set_current_state(TASK_INTERRUPTIBLE);
-	schedule_timeout(data*HZ);
+	case ETHTOOL_ID_OFF:
+		be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
+					BEACON_STATE_DISABLED);
+		break;
 
-	status = be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
-			BEACON_STATE_DISABLED);
+	case ETHTOOL_ID_INACTIVE:
+		be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
+					adapter->beacon_state);
+	}
 
-	return status;
+	return 0;
 }
 
 static bool
@@ -646,7 +635,7 @@ be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
 	}
 
 	if (be_cmd_link_status_query(adapter, &link_up, &mac_speed,
-				&qos_link_speed) != 0) {
+				&qos_link_speed, 0) != 0) {
 		test->flags |= ETH_TEST_FL_FAILED;
 		data[4] = -1;
 	} else if (!mac_speed) {
@@ -660,11 +649,9 @@ be_do_flash(struct net_device *netdev, struct ethtool_flash *efl)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 	char file_name[ETHTOOL_FLASH_MAX_FILENAME];
-	u32 region;
 
 	file_name[ETHTOOL_FLASH_MAX_FILENAME - 1] = 0;
 	strcpy(file_name, efl->data);
-	region = efl->region;
 
 	return be_load_fw(adapter, file_name);
 }
@@ -725,18 +712,12 @@ const struct ethtool_ops be_ethtool_ops = {
 	.get_ringparam = be_get_ringparam,
 	.get_pauseparam = be_get_pauseparam,
 	.set_pauseparam = be_set_pauseparam,
-	.get_rx_csum = be_get_rx_csum,
-	.set_rx_csum = be_set_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_hw_csum,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = ethtool_op_set_tso,
 	.get_strings = be_get_stat_strings,
-	.phys_id = be_phys_id,
+	.set_phys_id = be_set_phys_id,
 	.get_sset_count = be_get_sset_count,
 	.get_ethtool_stats = be_get_ethtool_stats,
+	.get_regs_len = be_get_reg_len,
+	.get_regs = be_get_regs,
 	.flash_device = be_do_flash,
 	.self_test = be_self_test,
 };
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index d4344a06090..53d658afea2 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -155,6 +155,10 @@
 /********** SRIOV VF PCICFG OFFSET ********/
 #define SRIOV_VF_PCICFG_OFFSET		(4096)
 
+/********** FAT TABLE  ********/
+#define RETRIEVE_FAT	0
+#define QUERY_FAT	1
+
 /* Flashrom related descriptors */
 #define IMAGE_TYPE_FIRMWARE		160
 #define IMAGE_TYPE_BOOTCODE		224
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index a71163f1e34..4b5e0ed49ed 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -42,6 +42,7 @@ static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
 	{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID3)},
+	{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID4)},
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -116,11 +117,6 @@ static char *ue_status_hi_desc[] = {
 	"Unknown"
 };
 
-static inline bool be_multi_rxq(struct be_adapter *adapter)
-{
-	return (adapter->num_rx_qs > 1);
-}
-
 static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q)
 {
 	struct be_dma_mem *mem = &q->dma_mem;
@@ -250,14 +246,185 @@ netdev_addr:
 	return status;
 }
 
+static void populate_be2_stats(struct be_adapter *adapter)
+{
+
+	struct be_drv_stats *drvs = &adapter->drv_stats;
+	struct be_pmem_stats *pmem_sts = be_pmem_stats_from_cmd(adapter);
+	struct be_port_rxf_stats_v0 *port_stats =
+		be_port_rxf_stats_from_cmd(adapter);
+	struct be_rxf_stats_v0 *rxf_stats =
+		be_rxf_stats_from_cmd(adapter);
+
+	drvs->rx_pause_frames = port_stats->rx_pause_frames;
+	drvs->rx_crc_errors = port_stats->rx_crc_errors;
+	drvs->rx_control_frames = port_stats->rx_control_frames;
+	drvs->rx_in_range_errors = port_stats->rx_in_range_errors;
+	drvs->rx_frame_too_long = port_stats->rx_frame_too_long;
+	drvs->rx_dropped_runt = port_stats->rx_dropped_runt;
+	drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs;
+	drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs;
+	drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs;
+	drvs->rxpp_fifo_overflow_drop = port_stats->rx_fifo_overflow;
+	drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length;
+	drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small;
+	drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short;
+	drvs->rx_out_range_errors = port_stats->rx_out_range_errors;
+	drvs->rx_input_fifo_overflow_drop =
+		port_stats->rx_input_fifo_overflow;
+	drvs->rx_dropped_header_too_small =
+		port_stats->rx_dropped_header_too_small;
+	drvs->rx_address_match_errors =
+		port_stats->rx_address_match_errors;
+	drvs->rx_alignment_symbol_errors =
+		port_stats->rx_alignment_symbol_errors;
+
+	drvs->tx_pauseframes = port_stats->tx_pauseframes;
+	drvs->tx_controlframes = port_stats->tx_controlframes;
+
+	if (adapter->port_num)
+		drvs->jabber_events =
+			rxf_stats->port1_jabber_events;
+	else
+		drvs->jabber_events =
+			rxf_stats->port0_jabber_events;
+	drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf;
+	drvs->rx_drops_no_txpb = rxf_stats->rx_drops_no_txpb;
+	drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr;
+	drvs->rx_drops_invalid_ring = rxf_stats->rx_drops_invalid_ring;
+	drvs->forwarded_packets = rxf_stats->forwarded_packets;
+	drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
+	drvs->rx_drops_no_tpre_descr =
+		rxf_stats->rx_drops_no_tpre_descr;
+	drvs->rx_drops_too_many_frags =
+		rxf_stats->rx_drops_too_many_frags;
+	adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
+}
+
+static void populate_be3_stats(struct be_adapter *adapter)
+{
+	struct be_drv_stats *drvs = &adapter->drv_stats;
+	struct be_pmem_stats *pmem_sts = be_pmem_stats_from_cmd(adapter);
+
+	struct be_rxf_stats_v1 *rxf_stats =
+		be_rxf_stats_from_cmd(adapter);
+	struct be_port_rxf_stats_v1 *port_stats =
+		be_port_rxf_stats_from_cmd(adapter);
+
+	drvs->rx_priority_pause_frames = 0;
+	drvs->pmem_fifo_overflow_drop = 0;
+	drvs->rx_pause_frames = port_stats->rx_pause_frames;
+	drvs->rx_crc_errors = port_stats->rx_crc_errors;
+	drvs->rx_control_frames = port_stats->rx_control_frames;
+	drvs->rx_in_range_errors = port_stats->rx_in_range_errors;
+	drvs->rx_frame_too_long = port_stats->rx_frame_too_long;
+	drvs->rx_dropped_runt = port_stats->rx_dropped_runt;
+	drvs->rx_ip_checksum_errs = port_stats->rx_ip_checksum_errs;
+	drvs->rx_tcp_checksum_errs = port_stats->rx_tcp_checksum_errs;
+	drvs->rx_udp_checksum_errs = port_stats->rx_udp_checksum_errs;
+	drvs->rx_dropped_tcp_length = port_stats->rx_dropped_tcp_length;
+	drvs->rx_dropped_too_small = port_stats->rx_dropped_too_small;
+	drvs->rx_dropped_too_short = port_stats->rx_dropped_too_short;
+	drvs->rx_out_range_errors = port_stats->rx_out_range_errors;
+	drvs->rx_dropped_header_too_small =
+		port_stats->rx_dropped_header_too_small;
+	drvs->rx_input_fifo_overflow_drop =
+		port_stats->rx_input_fifo_overflow_drop;
+	drvs->rx_address_match_errors =
+		port_stats->rx_address_match_errors;
+	drvs->rx_alignment_symbol_errors =
+		port_stats->rx_alignment_symbol_errors;
+	drvs->rxpp_fifo_overflow_drop =
+		port_stats->rxpp_fifo_overflow_drop;
+	drvs->tx_pauseframes = port_stats->tx_pauseframes;
+	drvs->tx_controlframes = port_stats->tx_controlframes;
+	drvs->jabber_events = port_stats->jabber_events;
+	drvs->rx_drops_no_pbuf = rxf_stats->rx_drops_no_pbuf;
+	drvs->rx_drops_no_txpb = rxf_stats->rx_drops_no_txpb;
+	drvs->rx_drops_no_erx_descr = rxf_stats->rx_drops_no_erx_descr;
+	drvs->rx_drops_invalid_ring = rxf_stats->rx_drops_invalid_ring;
+	drvs->forwarded_packets = rxf_stats->forwarded_packets;
+	drvs->rx_drops_mtu = rxf_stats->rx_drops_mtu;
+	drvs->rx_drops_no_tpre_descr =
+		rxf_stats->rx_drops_no_tpre_descr;
+	drvs->rx_drops_too_many_frags =
+		rxf_stats->rx_drops_too_many_frags;
+	adapter->drv_stats.eth_red_drops = pmem_sts->eth_red_drops;
+}
+
+static void populate_lancer_stats(struct be_adapter *adapter)
+{
+
+	struct be_drv_stats *drvs = &adapter->drv_stats;
+	struct lancer_cmd_pport_stats *pport_stats = pport_stats_from_cmd
+						(adapter);
+	drvs->rx_priority_pause_frames = 0;
+	drvs->pmem_fifo_overflow_drop = 0;
+	drvs->rx_pause_frames =
+		make_64bit_val(pport_stats->rx_pause_frames_lo,
+				 pport_stats->rx_pause_frames_hi);
+	drvs->rx_crc_errors = make_64bit_val(pport_stats->rx_crc_errors_hi,
+						pport_stats->rx_crc_errors_lo);
+	drvs->rx_control_frames =
+			make_64bit_val(pport_stats->rx_control_frames_hi,
+			pport_stats->rx_control_frames_lo);
+	drvs->rx_in_range_errors = pport_stats->rx_in_range_errors;
+	drvs->rx_frame_too_long =
+		make_64bit_val(pport_stats->rx_internal_mac_errors_hi,
+					pport_stats->rx_frames_too_long_lo);
+	drvs->rx_dropped_runt = pport_stats->rx_dropped_runt;
+	drvs->rx_ip_checksum_errs = pport_stats->rx_ip_checksum_errors;
+	drvs->rx_tcp_checksum_errs = pport_stats->rx_tcp_checksum_errors;
+	drvs->rx_udp_checksum_errs = pport_stats->rx_udp_checksum_errors;
+	drvs->rx_dropped_tcp_length =
+				pport_stats->rx_dropped_invalid_tcp_length;
+	drvs->rx_dropped_too_small = pport_stats->rx_dropped_too_small;
+	drvs->rx_dropped_too_short = pport_stats->rx_dropped_too_short;
+	drvs->rx_out_range_errors = pport_stats->rx_out_of_range_errors;
+	drvs->rx_dropped_header_too_small =
+				pport_stats->rx_dropped_header_too_small;
+	drvs->rx_input_fifo_overflow_drop = pport_stats->rx_fifo_overflow;
+	drvs->rx_address_match_errors = pport_stats->rx_address_match_errors;
+	drvs->rx_alignment_symbol_errors =
+		make_64bit_val(pport_stats->rx_symbol_errors_hi,
+				pport_stats->rx_symbol_errors_lo);
+	drvs->rxpp_fifo_overflow_drop = pport_stats->rx_fifo_overflow;
+	drvs->tx_pauseframes = make_64bit_val(pport_stats->tx_pause_frames_hi,
+					pport_stats->tx_pause_frames_lo);
+	drvs->tx_controlframes =
+		make_64bit_val(pport_stats->tx_control_frames_hi,
+				pport_stats->tx_control_frames_lo);
+	drvs->jabber_events = pport_stats->rx_jabbers;
+	drvs->rx_drops_no_pbuf = 0;
+	drvs->rx_drops_no_txpb = 0;
+	drvs->rx_drops_no_erx_descr = 0;
+	drvs->rx_drops_invalid_ring = pport_stats->rx_drops_invalid_queue;
+	drvs->forwarded_packets = make_64bit_val(pport_stats->num_forwards_hi,
+						pport_stats->num_forwards_lo);
+	drvs->rx_drops_mtu = make_64bit_val(pport_stats->rx_drops_mtu_hi,
+						pport_stats->rx_drops_mtu_lo);
+	drvs->rx_drops_no_tpre_descr = 0;
+	drvs->rx_drops_too_many_frags =
+		make_64bit_val(pport_stats->rx_drops_too_many_frags_hi,
+				pport_stats->rx_drops_too_many_frags_lo);
+}
+
+void be_parse_stats(struct be_adapter *adapter)
+{
+	if (adapter->generation == BE_GEN3) {
+		if (lancer_chip(adapter))
+			populate_lancer_stats(adapter);
+		 else
+			populate_be3_stats(adapter);
+	} else {
+		populate_be2_stats(adapter);
+	}
+}
+
 void netdev_stats_update(struct be_adapter *adapter)
 {
-	struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats_cmd.va);
-	struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
-	struct be_port_rxf_stats *port_stats =
-			&rxf_stats->port[adapter->port_num];
+	struct be_drv_stats *drvs = &adapter->drv_stats;
 	struct net_device_stats *dev_stats = &adapter->netdev->stats;
-	struct be_erx_stats *erx_stats = &hw_stats->erx;
 	struct be_rx_obj *rxo;
 	int i;
 
@@ -267,43 +434,54 @@ void netdev_stats_update(struct be_adapter *adapter)
 		dev_stats->rx_bytes += rx_stats(rxo)->rx_bytes;
 		dev_stats->multicast += rx_stats(rxo)->rx_mcast_pkts;
 		/*  no space in linux buffers: best possible approximation */
-		dev_stats->rx_dropped +=
-			erx_stats->rx_drops_no_fragments[rxo->q.id];
+		if (adapter->generation == BE_GEN3) {
+			if (!(lancer_chip(adapter))) {
+				struct be_erx_stats_v1 *erx_stats =
+					be_erx_stats_from_cmd(adapter);
+				dev_stats->rx_dropped +=
+				erx_stats->rx_drops_no_fragments[rxo->q.id];
+			}
+		} else {
+			struct be_erx_stats_v0 *erx_stats =
+					be_erx_stats_from_cmd(adapter);
+			dev_stats->rx_dropped +=
+				erx_stats->rx_drops_no_fragments[rxo->q.id];
+		}
 	}
 
 	dev_stats->tx_packets = tx_stats(adapter)->be_tx_pkts;
 	dev_stats->tx_bytes = tx_stats(adapter)->be_tx_bytes;
 
 	/* bad pkts received */
-	dev_stats->rx_errors = port_stats->rx_crc_errors +
-		port_stats->rx_alignment_symbol_errors +
-		port_stats->rx_in_range_errors +
-		port_stats->rx_out_range_errors +
-		port_stats->rx_frame_too_long +
-		port_stats->rx_dropped_too_small +
-		port_stats->rx_dropped_too_short +
-		port_stats->rx_dropped_header_too_small +
-		port_stats->rx_dropped_tcp_length +
-		port_stats->rx_dropped_runt +
-		port_stats->rx_tcp_checksum_errs +
-		port_stats->rx_ip_checksum_errs +
-		port_stats->rx_udp_checksum_errs;
+	dev_stats->rx_errors = drvs->rx_crc_errors +
+		drvs->rx_alignment_symbol_errors +
+		drvs->rx_in_range_errors +
+		drvs->rx_out_range_errors +
+		drvs->rx_frame_too_long +
+		drvs->rx_dropped_too_small +
+		drvs->rx_dropped_too_short +
+		drvs->rx_dropped_header_too_small +
+		drvs->rx_dropped_tcp_length +
+		drvs->rx_dropped_runt +
+		drvs->rx_tcp_checksum_errs +
+		drvs->rx_ip_checksum_errs +
+		drvs->rx_udp_checksum_errs;
 
 	/* detailed rx errors */
-	dev_stats->rx_length_errors = port_stats->rx_in_range_errors +
-		port_stats->rx_out_range_errors +
-		port_stats->rx_frame_too_long;
+	dev_stats->rx_length_errors = drvs->rx_in_range_errors +
+		drvs->rx_out_range_errors +
+		drvs->rx_frame_too_long;
 
-	dev_stats->rx_crc_errors = port_stats->rx_crc_errors;
+	dev_stats->rx_crc_errors = drvs->rx_crc_errors;
 
 	/* frame alignment errors */
-	dev_stats->rx_frame_errors = port_stats->rx_alignment_symbol_errors;
+	dev_stats->rx_frame_errors = drvs->rx_alignment_symbol_errors;
 
 	/* receiver fifo overrun */
 	/* drops_no_pbuf is no per i/f, it's per BE card */
-	dev_stats->rx_fifo_errors = port_stats->rx_fifo_overflow +
-					port_stats->rx_input_fifo_overflow +
-					rxf_stats->rx_drops_no_pbuf;
+	dev_stats->rx_fifo_errors = drvs->rxpp_fifo_overflow_drop +
+				drvs->rx_input_fifo_overflow_drop +
+				drvs->rx_drops_no_pbuf;
 }
 
 void be_link_status_update(struct be_adapter *adapter, bool link_up)
@@ -703,15 +881,15 @@ static void be_set_multicast_list(struct net_device *netdev)
 	struct be_adapter *adapter = netdev_priv(netdev);
 
 	if (netdev->flags & IFF_PROMISC) {
-		be_cmd_promiscuous_config(adapter, adapter->port_num, 1);
+		be_cmd_promiscuous_config(adapter, true);
 		adapter->promiscuous = true;
 		goto done;
 	}
 
-	/* BE was previously in promiscous mode; disable it */
+	/* BE was previously in promiscuous mode; disable it */
 	if (adapter->promiscuous) {
 		adapter->promiscuous = false;
-		be_cmd_promiscuous_config(adapter, adapter->port_num, 0);
+		be_cmd_promiscuous_config(adapter, false);
 	}
 
 	/* Enable multicast promisc if num configured exceeds what we support */
@@ -993,9 +1171,10 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 			struct be_rx_obj *rxo,
 			struct be_rx_compl_info *rxcp)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct sk_buff *skb;
 
-	skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
+	skb = netdev_alloc_skb_ip_align(netdev, BE_HDR_LEN);
 	if (unlikely(!skb)) {
 		if (net_ratelimit())
 			dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
@@ -1005,20 +1184,24 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 
 	skb_fill_rx_data(adapter, rxo, skb, rxcp);
 
-	if (likely(adapter->rx_csum && csum_passed(rxcp)))
+	if (likely((netdev->features & NETIF_F_RXCSUM) && csum_passed(rxcp)))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	else
 		skb_checksum_none_assert(skb);
 
 	skb->truesize = skb->len + sizeof(struct sk_buff);
-	skb->protocol = eth_type_trans(skb, adapter->netdev);
+	skb->protocol = eth_type_trans(skb, netdev);
+	if (adapter->netdev->features & NETIF_F_RXHASH)
+		skb->rxhash = rxcp->rss_hash;
+
 
 	if (unlikely(rxcp->vlanf)) {
 		if (!adapter->vlan_grp || adapter->vlans_added == 0) {
 			kfree_skb(skb);
 			return;
 		}
-		vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, rxcp->vid);
+		vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
+					rxcp->vlan_tag);
 	} else {
 		netif_receive_skb(skb);
 	}
@@ -1072,11 +1255,14 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 	skb->data_len = rxcp->pkt_size;
 	skb->truesize += rxcp->pkt_size;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	if (adapter->netdev->features & NETIF_F_RXHASH)
+		skb->rxhash = rxcp->rss_hash;
 
 	if (likely(!rxcp->vlanf))
 		napi_gro_frags(&eq_obj->napi);
 	else
-		vlan_gro_frags(&eq_obj->napi, adapter->vlan_grp, rxcp->vid);
+		vlan_gro_frags(&eq_obj->napi, adapter->vlan_grp,
+				rxcp->vlan_tag);
 }
 
 static void be_parse_rx_compl_v1(struct be_adapter *adapter,
@@ -1101,8 +1287,14 @@ static void be_parse_rx_compl_v1(struct be_adapter *adapter,
 		AMAP_GET_BITS(struct amap_eth_rx_compl_v1, numfrags, compl);
 	rxcp->pkt_type =
 		AMAP_GET_BITS(struct amap_eth_rx_compl_v1, cast_enc, compl);
-	rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtm, compl);
-	rxcp->vid = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vlan_tag, compl);
+	rxcp->rss_hash =
+		AMAP_GET_BITS(struct amap_eth_rx_compl_v1, rsshash, rxcp);
+	if (rxcp->vlanf) {
+		rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtm,
+					  compl);
+		rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vlan_tag,
+					       compl);
+	}
 }
 
 static void be_parse_rx_compl_v0(struct be_adapter *adapter,
@@ -1127,8 +1319,14 @@ static void be_parse_rx_compl_v0(struct be_adapter *adapter,
 		AMAP_GET_BITS(struct amap_eth_rx_compl_v0, numfrags, compl);
 	rxcp->pkt_type =
 		AMAP_GET_BITS(struct amap_eth_rx_compl_v0, cast_enc, compl);
-	rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtm, compl);
-	rxcp->vid = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vlan_tag, compl);
+	rxcp->rss_hash =
+		AMAP_GET_BITS(struct amap_eth_rx_compl_v0, rsshash, rxcp);
+	if (rxcp->vlanf) {
+		rxcp->vtm = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtm,
+					  compl);
+		rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vlan_tag,
+					       compl);
+	}
 }
 
 static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
@@ -1150,15 +1348,20 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
 	else
 		be_parse_rx_compl_v0(adapter, compl, rxcp);
 
-	/* vlanf could be wrongly set in some cards. ignore if vtm is not set */
-	if ((adapter->function_mode & 0x400) && !rxcp->vtm)
-		rxcp->vlanf = 0;
+	if (rxcp->vlanf) {
+		/* vlanf could be wrongly set in some cards.
+		 * ignore if vtm is not set */
+		if ((adapter->function_mode & 0x400) && !rxcp->vtm)
+			rxcp->vlanf = 0;
 
-	if (!lancer_chip(adapter))
-		rxcp->vid = swab16(rxcp->vid);
+		if (!lancer_chip(adapter))
+			rxcp->vlan_tag = swab16(rxcp->vlan_tag);
 
-	if ((adapter->pvid == rxcp->vid) && !adapter->vlan_tag[rxcp->vid])
-		rxcp->vlanf = 0;
+		if (((adapter->pvid & VLAN_VID_MASK) ==
+		     (rxcp->vlan_tag & VLAN_VID_MASK)) &&
+		    !adapter->vlan_tag[rxcp->vlan_tag])
+			rxcp->vlanf = 0;
+	}
 
 	/* As the compl has been parsed, reset it; we wont touch it again */
 	compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] = 0;
@@ -1255,7 +1458,7 @@ static struct be_eth_tx_compl *be_tx_compl_get(struct be_queue_info *tx_cq)
 	return txcp;
 }
 
-static void be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
+static u16 be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
 {
 	struct be_queue_info *txq = &adapter->tx_obj.q;
 	struct be_eth_wrb *wrb;
@@ -1282,9 +1485,8 @@ static void be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
 		queue_tail_inc(txq);
 	} while (cur_index != last_index);
 
-	atomic_sub(num_wrbs, &txq->used);
-
 	kfree_skb(sent_skb);
+	return num_wrbs;
 }
 
 static inline struct be_eq_entry *event_get(struct be_eq_obj *eq_obj)
@@ -1367,7 +1569,7 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 	struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
 	struct be_queue_info *txq = &adapter->tx_obj.q;
 	struct be_eth_tx_compl *txcp;
-	u16 end_idx, cmpl = 0, timeo = 0;
+	u16 end_idx, cmpl = 0, timeo = 0, num_wrbs = 0;
 	struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
 	struct sk_buff *sent_skb;
 	bool dummy_wrb;
@@ -1377,12 +1579,14 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 		while ((txcp = be_tx_compl_get(tx_cq))) {
 			end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
 					wrb_index, txcp);
-			be_tx_compl_process(adapter, end_idx);
+			num_wrbs += be_tx_compl_process(adapter, end_idx);
 			cmpl++;
 		}
 		if (cmpl) {
 			be_cq_notify(adapter, tx_cq->id, false, cmpl);
+			atomic_sub(num_wrbs, &txq->used);
 			cmpl = 0;
+			num_wrbs = 0;
 		}
 
 		if (atomic_read(&txq->used) == 0 || ++timeo > 200)
@@ -1402,7 +1606,8 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 		index_adv(&end_idx,
 			wrb_cnt_for_skb(adapter, sent_skb, &dummy_wrb) - 1,
 			txq->len);
-		be_tx_compl_process(adapter, end_idx);
+		num_wrbs = be_tx_compl_process(adapter, end_idx);
+		atomic_sub(num_wrbs, &txq->used);
 	}
 }
 
@@ -1497,7 +1702,7 @@ static int be_tx_queues_create(struct be_adapter *adapter)
 	if (be_cmd_eq_create(adapter, eq, adapter->tx_eq.cur_eqd))
 		goto tx_eq_free;
 
-	adapter->tx_eq.msix_vec_idx = adapter->msix_vec_next_idx++;
+	adapter->tx_eq.eq_idx = adapter->eq_next_idx++;
 
 
 	/* Alloc TX eth compl queue */
@@ -1567,12 +1772,31 @@ static void be_rx_queues_destroy(struct be_adapter *adapter)
 	}
 }
 
+static u32 be_num_rxqs_want(struct be_adapter *adapter)
+{
+	if (multi_rxq && (adapter->function_caps & BE_FUNCTION_CAPS_RSS) &&
+		!adapter->sriov_enabled && !(adapter->function_mode & 0x400)) {
+		return 1 + MAX_RSS_QS; /* one default non-RSS queue */
+	} else {
+		dev_warn(&adapter->pdev->dev,
+			"No support for multiple RX queues\n");
+		return 1;
+	}
+}
+
 static int be_rx_queues_create(struct be_adapter *adapter)
 {
 	struct be_queue_info *eq, *q, *cq;
 	struct be_rx_obj *rxo;
 	int rc, i;
 
+	adapter->num_rx_qs = min(be_num_rxqs_want(adapter),
+				msix_enabled(adapter) ?
+					adapter->num_msix_vec - 1 : 1);
+	if (adapter->num_rx_qs != MAX_RX_QS)
+		dev_warn(&adapter->pdev->dev,
+			"Can create only %d RX queues", adapter->num_rx_qs);
+
 	adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
 	for_all_rx_queues(adapter, rxo, i) {
 		rxo->adapter = adapter;
@@ -1590,7 +1814,7 @@ static int be_rx_queues_create(struct be_adapter *adapter)
 		if (rc)
 			goto err;
 
-		rxo->rx_eq.msix_vec_idx = adapter->msix_vec_next_idx++;
+		rxo->rx_eq.eq_idx = adapter->eq_next_idx++;
 
 		/* CQ */
 		cq = &rxo->cq;
@@ -1666,11 +1890,11 @@ static irqreturn_t be_intx(int irq, void *dev)
 		if (!isr)
 			return IRQ_NONE;
 
-		if ((1 << adapter->tx_eq.msix_vec_idx & isr))
+		if ((1 << adapter->tx_eq.eq_idx & isr))
 			event_handle(adapter, &adapter->tx_eq);
 
 		for_all_rx_queues(adapter, rxo, i) {
-			if ((1 << rxo->rx_eq.msix_vec_idx & isr))
+			if ((1 << rxo->rx_eq.eq_idx & isr))
 				event_handle(adapter, &rxo->rx_eq);
 		}
 	}
@@ -1718,12 +1942,15 @@ static int be_poll_rx(struct napi_struct *napi, int budget)
 			break;
 
 		/* Ignore flush completions */
-		if (rxcp->num_rcvd) {
+		if (rxcp->num_rcvd && rxcp->pkt_size) {
 			if (do_gro(rxcp))
 				be_rx_compl_process_gro(adapter, rxo, rxcp);
 			else
 				be_rx_compl_process(adapter, rxo, rxcp);
+		} else if (rxcp->pkt_size == 0) {
+			be_rx_compl_discard(adapter, rxo, rxcp);
 		}
+
 		be_rx_stats_update(rxo, rxcp);
 	}
 
@@ -1754,12 +1981,12 @@ static int be_poll_tx_mcc(struct napi_struct *napi, int budget)
 	struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
 	struct be_eth_tx_compl *txcp;
 	int tx_compl = 0, mcc_compl, status = 0;
-	u16 end_idx;
+	u16 end_idx, num_wrbs = 0;
 
 	while ((txcp = be_tx_compl_get(tx_cq))) {
 		end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
 				wrb_index, txcp);
-		be_tx_compl_process(adapter, end_idx);
+		num_wrbs += be_tx_compl_process(adapter, end_idx);
 		tx_compl++;
 	}
 
@@ -1775,6 +2002,8 @@ static int be_poll_tx_mcc(struct napi_struct *napi, int budget)
 	if (tx_compl) {
 		be_cq_notify(adapter, adapter->tx_obj.cq.id, true, tx_compl);
 
+		atomic_sub(num_wrbs, &txq->used);
+
 		/* As Tx wrbs have been freed up, wake up netdev queue if
 		 * it was stopped due to lack of tx wrbs.
 		 */
@@ -1837,6 +2066,9 @@ static void be_worker(struct work_struct *work)
 	struct be_rx_obj *rxo;
 	int i;
 
+	if (!adapter->ue_detected && !lancer_chip(adapter))
+		be_detect_dump_ue(adapter);
+
 	/* when interrupts are not yet enabled, just reap any pending
 	* mcc completions */
 	if (!netif_running(adapter->netdev)) {
@@ -1849,15 +2081,16 @@ static void be_worker(struct work_struct *work)
 			be_cq_notify(adapter, mcc_obj->cq.id, false, mcc_compl);
 		}
 
-		if (!adapter->ue_detected && !lancer_chip(adapter))
-			be_detect_dump_ue(adapter);
-
 		goto reschedule;
 	}
 
-	if (!adapter->stats_cmd_sent)
-		be_cmd_get_stats(adapter, &adapter->stats_cmd);
-
+	if (!adapter->stats_cmd_sent) {
+		if (lancer_chip(adapter))
+			lancer_cmd_get_pport_stats(adapter,
+						&adapter->stats_cmd);
+		else
+			be_cmd_get_stats(adapter, &adapter->stats_cmd);
+	}
 	be_tx_rate_update(adapter);
 
 	for_all_rx_queues(adapter, rxo, i) {
@@ -1869,60 +2102,43 @@ static void be_worker(struct work_struct *work)
 			be_post_rx_frags(rxo, GFP_KERNEL);
 		}
 	}
-	if (!adapter->ue_detected && !lancer_chip(adapter))
-		be_detect_dump_ue(adapter);
 
 reschedule:
+	adapter->work_counter++;
 	schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
 }
 
 static void be_msix_disable(struct be_adapter *adapter)
 {
-	if (adapter->msix_enabled) {
+	if (msix_enabled(adapter)) {
 		pci_disable_msix(adapter->pdev);
-		adapter->msix_enabled = false;
-	}
-}
-
-static int be_num_rxqs_get(struct be_adapter *adapter)
-{
-	if (multi_rxq && (adapter->function_caps & BE_FUNCTION_CAPS_RSS) &&
-		!adapter->sriov_enabled && !(adapter->function_mode & 0x400)) {
-		return 1 + MAX_RSS_QS; /* one default non-RSS queue */
-	} else {
-		dev_warn(&adapter->pdev->dev,
-			"No support for multiple RX queues\n");
-		return 1;
+		adapter->num_msix_vec = 0;
 	}
 }
 
 static void be_msix_enable(struct be_adapter *adapter)
 {
 #define BE_MIN_MSIX_VECTORS	(1 + 1) /* Rx + Tx */
-	int i, status;
+	int i, status, num_vec;
 
-	adapter->num_rx_qs = be_num_rxqs_get(adapter);
+	num_vec = be_num_rxqs_want(adapter) + 1;
 
-	for (i = 0; i < (adapter->num_rx_qs + 1); i++)
+	for (i = 0; i < num_vec; i++)
 		adapter->msix_entries[i].entry = i;
 
-	status = pci_enable_msix(adapter->pdev, adapter->msix_entries,
-			adapter->num_rx_qs + 1);
+	status = pci_enable_msix(adapter->pdev, adapter->msix_entries, num_vec);
 	if (status == 0) {
 		goto done;
 	} else if (status >= BE_MIN_MSIX_VECTORS) {
+		num_vec = status;
 		if (pci_enable_msix(adapter->pdev, adapter->msix_entries,
-				status) == 0) {
-			adapter->num_rx_qs = status - 1;
-			dev_warn(&adapter->pdev->dev,
-				"Could alloc only %d MSIx vectors. "
-				"Using %d RX Qs\n", status, adapter->num_rx_qs);
+				num_vec) == 0)
 			goto done;
-		}
 	}
 	return;
 done:
-	adapter->msix_enabled = true;
+	adapter->num_msix_vec = num_vec;
+	return;
 }
 
 static void be_sriov_enable(struct be_adapter *adapter)
@@ -1930,7 +2146,20 @@ static void be_sriov_enable(struct be_adapter *adapter)
 	be_check_sriov_fn_type(adapter);
 #ifdef CONFIG_PCI_IOV
 	if (be_physfn(adapter) && num_vfs) {
-		int status;
+		int status, pos;
+		u16 nvfs;
+
+		pos = pci_find_ext_capability(adapter->pdev,
+						PCI_EXT_CAP_ID_SRIOV);
+		pci_read_config_word(adapter->pdev,
+					pos + PCI_SRIOV_TOTAL_VF, &nvfs);
+
+		if (num_vfs > nvfs) {
+			dev_info(&adapter->pdev->dev,
+					"Device supports %d VFs and not %d\n",
+					nvfs, num_vfs);
+			num_vfs = nvfs;
+		}
 
 		status = pci_enable_sriov(adapter->pdev, num_vfs);
 		adapter->sriov_enabled = status ? false : true;
@@ -1951,7 +2180,7 @@ static void be_sriov_disable(struct be_adapter *adapter)
 static inline int be_msix_vec_get(struct be_adapter *adapter,
 					struct be_eq_obj *eq_obj)
 {
-	return adapter->msix_entries[eq_obj->msix_vec_idx].vector;
+	return adapter->msix_entries[eq_obj->eq_idx].vector;
 }
 
 static int be_request_irq(struct be_adapter *adapter,
@@ -2003,8 +2232,7 @@ err_msix:
 err:
 	dev_warn(&adapter->pdev->dev,
 		"MSIX Request IRQ failed - err %d\n", status);
-	pci_disable_msix(adapter->pdev);
-	adapter->msix_enabled = false;
+	be_msix_disable(adapter);
 	return status;
 }
 
@@ -2013,7 +2241,7 @@ static int be_irq_register(struct be_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	int status;
 
-	if (adapter->msix_enabled) {
+	if (msix_enabled(adapter)) {
 		status = be_msix_register(adapter);
 		if (status == 0)
 			goto done;
@@ -2046,7 +2274,7 @@ static void be_irq_unregister(struct be_adapter *adapter)
 		return;
 
 	/* INTx */
-	if (!adapter->msix_enabled) {
+	if (!msix_enabled(adapter)) {
 		free_irq(netdev->irq, adapter);
 		goto done;
 	}
@@ -2088,7 +2316,7 @@ static int be_close(struct net_device *netdev)
 			 be_cq_notify(adapter, rxo->cq.id, false, 0);
 	}
 
-	if (adapter->msix_enabled) {
+	if (msix_enabled(adapter)) {
 		vec = be_msix_vec_get(adapter, tx_eq);
 		synchronize_irq(vec);
 
@@ -2141,7 +2369,7 @@ static int be_open(struct net_device *netdev)
 	be_async_mcc_enable(adapter);
 
 	status = be_cmd_link_status_query(adapter, &link_up, &mac_speed,
-			&link_speed);
+			&link_speed, 0);
 	if (status)
 		goto err;
 	be_link_status_update(adapter, link_up);
@@ -2261,7 +2489,7 @@ static int be_setup(struct be_adapter *adapter)
 				BE_IF_FLAGS_PASS_L3L4_ERRORS;
 		en_flags |= BE_IF_FLAGS_PASS_L3L4_ERRORS;
 
-		if (be_multi_rxq(adapter)) {
+		if (adapter->function_caps & BE_FUNCTION_CAPS_RSS) {
 			cap_flags |= BE_IF_FLAGS_RSS;
 			en_flags |= BE_IF_FLAGS_RSS;
 		}
@@ -2318,7 +2546,6 @@ static int be_setup(struct be_adapter *adapter)
 
 	return 0;
 
-	be_mcc_queues_destroy(adapter);
 rx_qs_destroy:
 	be_rx_queues_destroy(adapter);
 tx_qs_destroy:
@@ -2345,6 +2572,7 @@ static int be_clear(struct be_adapter *adapter)
 	be_mcc_queues_destroy(adapter);
 	be_rx_queues_destroy(adapter);
 	be_tx_queues_destroy(adapter);
+	adapter->eq_next_idx = 0;
 
 	if (be_physfn(adapter) && adapter->sriov_enabled)
 		for (vf = 0; vf < num_vfs; vf++)
@@ -2485,7 +2713,6 @@ static int be_flash_data(struct be_adapter *adapter,
 					"cmd to write to flash rom failed.\n");
 				return -1;
 			}
-			yield();
 		}
 	}
 	return 0;
@@ -2503,32 +2730,96 @@ static int get_ufigen_type(struct flash_file_hdr_g2 *fhdr)
 		return 0;
 }
 
-int be_load_fw(struct be_adapter *adapter, u8 *func)
+static int lancer_fw_download(struct be_adapter *adapter,
+				const struct firmware *fw)
 {
-	char fw_file[ETHTOOL_FLASH_MAX_FILENAME];
-	const struct firmware *fw;
-	struct flash_file_hdr_g2 *fhdr;
-	struct flash_file_hdr_g3 *fhdr3;
-	struct image_hdr *img_hdr_ptr = NULL;
+#define LANCER_FW_DOWNLOAD_CHUNK      (32 * 1024)
+#define LANCER_FW_DOWNLOAD_LOCATION   "/prg"
 	struct be_dma_mem flash_cmd;
-	int status, i = 0, num_imgs = 0;
-	const u8 *p;
+	const u8 *data_ptr = NULL;
+	u8 *dest_image_ptr = NULL;
+	size_t image_size = 0;
+	u32 chunk_size = 0;
+	u32 data_written = 0;
+	u32 offset = 0;
+	int status = 0;
+	u8 add_status = 0;
 
-	if (!netif_running(adapter->netdev)) {
+	if (!IS_ALIGNED(fw->size, sizeof(u32))) {
 		dev_err(&adapter->pdev->dev,
-			"Firmware load not allowed (interface is down)\n");
-		return -EPERM;
+			"FW Image not properly aligned. "
+			"Length must be 4 byte aligned.\n");
+		status = -EINVAL;
+		goto lancer_fw_exit;
+	}
+
+	flash_cmd.size = sizeof(struct lancer_cmd_req_write_object)
+				+ LANCER_FW_DOWNLOAD_CHUNK;
+	flash_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, flash_cmd.size,
+						&flash_cmd.dma, GFP_KERNEL);
+	if (!flash_cmd.va) {
+		status = -ENOMEM;
+		dev_err(&adapter->pdev->dev,
+			"Memory allocation failure while flashing\n");
+		goto lancer_fw_exit;
 	}
 
-	strcpy(fw_file, func);
+	dest_image_ptr = flash_cmd.va +
+				sizeof(struct lancer_cmd_req_write_object);
+	image_size = fw->size;
+	data_ptr = fw->data;
 
-	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
-	if (status)
-		goto fw_exit;
+	while (image_size) {
+		chunk_size = min_t(u32, image_size, LANCER_FW_DOWNLOAD_CHUNK);
+
+		/* Copy the image chunk content. */
+		memcpy(dest_image_ptr, data_ptr, chunk_size);
+
+		status = lancer_cmd_write_object(adapter, &flash_cmd,
+				chunk_size, offset, LANCER_FW_DOWNLOAD_LOCATION,
+				&data_written, &add_status);
+
+		if (status)
+			break;
+
+		offset += data_written;
+		data_ptr += data_written;
+		image_size -= data_written;
+	}
+
+	if (!status) {
+		/* Commit the FW written */
+		status = lancer_cmd_write_object(adapter, &flash_cmd,
+					0, offset, LANCER_FW_DOWNLOAD_LOCATION,
+					&data_written, &add_status);
+	}
+
+	dma_free_coherent(&adapter->pdev->dev, flash_cmd.size, flash_cmd.va,
+				flash_cmd.dma);
+	if (status) {
+		dev_err(&adapter->pdev->dev,
+			"Firmware load error. "
+			"Status code: 0x%x Additional Status: 0x%x\n",
+			status, add_status);
+		goto lancer_fw_exit;
+	}
+
+	dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
+lancer_fw_exit:
+	return status;
+}
+
+static int be_fw_download(struct be_adapter *adapter, const struct firmware* fw)
+{
+	struct flash_file_hdr_g2 *fhdr;
+	struct flash_file_hdr_g3 *fhdr3;
+	struct image_hdr *img_hdr_ptr = NULL;
+	struct be_dma_mem flash_cmd;
+	const u8 *p;
+	int status = 0, i = 0, num_imgs = 0;
 
 	p = fw->data;
 	fhdr = (struct flash_file_hdr_g2 *) p;
-	dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file);
 
 	flash_cmd.size = sizeof(struct be_cmd_write_flashrom) + 32*1024;
 	flash_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, flash_cmd.size,
@@ -2537,7 +2828,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 		status = -ENOMEM;
 		dev_err(&adapter->pdev->dev,
 			"Memory allocation failure while flashing\n");
-		goto fw_exit;
+		goto be_fw_exit;
 	}
 
 	if ((adapter->generation == BE_GEN3) &&
@@ -2565,11 +2856,37 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 			  flash_cmd.dma);
 	if (status) {
 		dev_err(&adapter->pdev->dev, "Firmware load error\n");
-		goto fw_exit;
+		goto be_fw_exit;
 	}
 
 	dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
 
+be_fw_exit:
+	return status;
+}
+
+int be_load_fw(struct be_adapter *adapter, u8 *fw_file)
+{
+	const struct firmware *fw;
+	int status;
+
+	if (!netif_running(adapter->netdev)) {
+		dev_err(&adapter->pdev->dev,
+			"Firmware load not allowed (interface is down)\n");
+		return -1;
+	}
+
+	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
+	if (status)
+		goto fw_exit;
+
+	dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file);
+
+	if (lancer_chip(adapter))
+		status = lancer_fw_download(adapter, fw);
+	else
+		status = be_fw_download(adapter, fw);
+
 fw_exit:
 	release_firmware(fw);
 	return status;
@@ -2598,10 +2915,14 @@ static void be_netdev_init(struct net_device *netdev)
 	struct be_rx_obj *rxo;
 	int i;
 
-	netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
-		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
-		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-		NETIF_F_GRO | NETIF_F_TSO6;
+	netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |
+		NETIF_F_HW_VLAN_TX;
+	if (be_multi_rxq(adapter))
+		netdev->hw_features |= NETIF_F_RXHASH;
+
+	netdev->features |= netdev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
 
 	netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO |
 		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
@@ -2611,8 +2932,6 @@ static void be_netdev_init(struct net_device *netdev)
 
 	netdev->flags |= IFF_MULTICAST;
 
-	adapter->rx_csum = true;
-
 	/* Default settings for Rx and Tx flow control */
 	adapter->rx_fc = true;
 	adapter->tx_fc = true;
@@ -2780,7 +3099,14 @@ static int be_stats_init(struct be_adapter *adapter)
 {
 	struct be_dma_mem *cmd = &adapter->stats_cmd;
 
-	cmd->size = sizeof(struct be_cmd_req_get_stats);
+	if (adapter->generation == BE_GEN2) {
+		cmd->size = sizeof(struct be_cmd_req_get_stats_v0);
+	} else {
+		if (lancer_chip(adapter))
+			cmd->size = sizeof(struct lancer_cmd_req_pport_stats);
+		else
+			cmd->size = sizeof(struct be_cmd_req_get_stats_v1);
+	}
 	cmd->va = dma_alloc_coherent(&adapter->pdev->dev, cmd->size, &cmd->dma,
 				     GFP_KERNEL);
 	if (cmd->va == NULL)
@@ -2806,6 +3132,7 @@ static void __devexit be_remove(struct pci_dev *pdev)
 
 	be_ctrl_cleanup(adapter);
 
+	kfree(adapter->vf_cfg);
 	be_sriov_disable(adapter);
 
 	be_msix_disable(adapter);
@@ -2833,7 +3160,8 @@ static int be_get_config(struct be_adapter *adapter)
 
 	memset(mac, 0, ETH_ALEN);
 
-	if (be_physfn(adapter)) {
+	/* A default permanent address is given to each VF for Lancer*/
+	if (be_physfn(adapter) || lancer_chip(adapter)) {
 		status = be_cmd_mac_addr_query(adapter, mac,
 			MAC_ADDRESS_TYPE_NETWORK, true /*permanent */, 0);
 
@@ -2875,6 +3203,7 @@ static int be_dev_family_check(struct be_adapter *adapter)
 		adapter->generation = BE_GEN3;
 		break;
 	case OC_DEVICE_ID3:
+	case OC_DEVICE_ID4:
 		pci_read_config_dword(pdev, SLI_INTF_REG_OFFSET, &sli_intf);
 		if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
 						SLI_INTF_IF_TYPE_SHIFT;
@@ -2884,10 +3213,6 @@ static int be_dev_family_check(struct be_adapter *adapter)
 			dev_err(&pdev->dev, "SLI_INTF reg val is not valid\n");
 			return -EINVAL;
 		}
-		if (num_vfs > 0) {
-			dev_err(&pdev->dev, "VFs not supported\n");
-			return -EINVAL;
-		}
 		adapter->sli_family = ((sli_intf & SLI_INTF_FAMILY_MASK) >>
 					 SLI_INTF_FAMILY_SHIFT);
 		adapter->generation = BE_GEN3;
@@ -2990,16 +3315,23 @@ static int __devinit be_probe(struct pci_dev *pdev,
 	}
 
 	be_sriov_enable(adapter);
+	if (adapter->sriov_enabled) {
+		adapter->vf_cfg = kcalloc(num_vfs,
+			sizeof(struct be_vf_cfg), GFP_KERNEL);
+
+		if (!adapter->vf_cfg)
+			goto free_netdev;
+	}
 
 	status = be_ctrl_init(adapter);
 	if (status)
-		goto free_netdev;
+		goto free_vf_cfg;
 
 	if (lancer_chip(adapter)) {
 		status = lancer_test_and_set_rdy_state(adapter);
 		if (status) {
 			dev_err(&pdev->dev, "Adapter in non recoverable error\n");
-			goto free_netdev;
+			goto ctrl_clean;
 		}
 	}
 
@@ -3042,9 +3374,24 @@ static int __devinit be_probe(struct pci_dev *pdev,
 	netif_carrier_off(netdev);
 
 	if (be_physfn(adapter) && adapter->sriov_enabled) {
-		status = be_vf_eth_addr_config(adapter);
-		if (status)
-			goto unreg_netdev;
+		u8 mac_speed;
+		bool link_up;
+		u16 vf, lnk_speed;
+
+		if (!lancer_chip(adapter)) {
+			status = be_vf_eth_addr_config(adapter);
+			if (status)
+				goto unreg_netdev;
+		}
+
+		for (vf = 0; vf < num_vfs; vf++) {
+			status = be_cmd_link_status_query(adapter, &link_up,
+					&mac_speed, &lnk_speed, vf + 1);
+			if (!status)
+				adapter->vf_cfg[vf].vf_tx_rate = lnk_speed * 10;
+			else
+				goto unreg_netdev;
+		}
 	}
 
 	dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
@@ -3061,6 +3408,8 @@ stats_clean:
 	be_stats_cleanup(adapter);
 ctrl_clean:
 	be_ctrl_cleanup(adapter);
+free_vf_cfg:
+	kfree(adapter->vf_cfg);
 free_netdev:
 	be_sriov_disable(adapter);
 	free_netdev(netdev);
@@ -3141,18 +3490,19 @@ static int be_resume(struct pci_dev *pdev)
 static void be_shutdown(struct pci_dev *pdev)
 {
 	struct be_adapter *adapter = pci_get_drvdata(pdev);
-	struct net_device *netdev =  adapter->netdev;
 
-	if (netif_running(netdev))
-		cancel_delayed_work_sync(&adapter->work);
+	if (!adapter)
+		return;
 
-	netif_device_detach(netdev);
+	cancel_delayed_work_sync(&adapter->work);
 
-	be_cmd_reset_function(adapter);
+	netif_device_detach(adapter->netdev);
 
 	if (adapter->wol)
 		be_setup_wol(adapter, true);
 
+	be_cmd_reset_function(adapter);
+
 	pci_disable_device(pdev);
 }
 
@@ -3264,13 +3614,6 @@ static int __init be_init_module(void)
 		rx_frag_size = 2048;
 	}
 
-	if (num_vfs > 32) {
-		printk(KERN_WARNING DRV_NAME
-			" : Module param num_vfs must not be greater than 32."
-			"Using 32\n");
-		num_vfs = 32;
-	}
-
 	return pci_register_driver(&be_driver);
 }
 module_init(be_init_module);
diff --git a/drivers/net/bna/bfa_ioc.c b/drivers/net/bna/bfa_ioc.c
index 34933cb9569..fcb9bb3169e 100644
--- a/drivers/net/bna/bfa_ioc.c
+++ b/drivers/net/bna/bfa_ioc.c
@@ -38,6 +38,8 @@
 #define bfa_ioc_map_port(__ioc) ((__ioc)->ioc_hwif->ioc_map_port(__ioc))
 #define bfa_ioc_notify_fail(__ioc)			\
 			((__ioc)->ioc_hwif->ioc_notify_fail(__ioc))
+#define bfa_ioc_sync_start(__ioc)               \
+			((__ioc)->ioc_hwif->ioc_sync_start(__ioc))
 #define bfa_ioc_sync_join(__ioc)			\
 			((__ioc)->ioc_hwif->ioc_sync_join(__ioc))
 #define bfa_ioc_sync_leave(__ioc)			\
@@ -80,7 +82,6 @@ static void bfa_ioc_pf_fwmismatch(struct bfa_ioc *ioc);
 static void bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type,
 			 u32 boot_param);
 static u32 bfa_ioc_smem_pgnum(struct bfa_ioc *ioc, u32 fmaddr);
-static u32 bfa_ioc_smem_pgoff(struct bfa_ioc *ioc, u32 fmaddr);
 static void bfa_ioc_get_adapter_serial_num(struct bfa_ioc *ioc,
 						char *serial_num);
 static void bfa_ioc_get_adapter_fw_ver(struct bfa_ioc *ioc,
@@ -602,7 +603,7 @@ bfa_iocpf_sm_fwcheck(struct bfa_iocpf *iocpf, enum iocpf_event event)
 	switch (event) {
 	case IOCPF_E_SEMLOCKED:
 		if (bfa_ioc_firmware_lock(ioc)) {
-			if (bfa_ioc_sync_complete(ioc)) {
+			if (bfa_ioc_sync_start(ioc)) {
 				iocpf->retry_count = 0;
 				bfa_ioc_sync_join(ioc);
 				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
@@ -1272,13 +1273,12 @@ bfa_ioc_lpu_stop(struct bfa_ioc *ioc)
 void
 bfa_nw_ioc_fwver_get(struct bfa_ioc *ioc, struct bfi_ioc_image_hdr *fwhdr)
 {
-	u32	pgnum, pgoff;
+	u32	pgnum;
 	u32	loff = 0;
 	int		i;
 	u32	*fwsig = (u32 *) fwhdr;
 
 	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
-	pgoff = bfa_ioc_smem_pgoff(ioc, loff);
 	writel(pgnum, ioc->ioc_regs.host_page_num_fn);
 
 	for (i = 0; i < (sizeof(struct bfi_ioc_image_hdr) / sizeof(u32));
@@ -1314,7 +1314,7 @@ bfa_nw_ioc_fwver_cmp(struct bfa_ioc *ioc, struct bfi_ioc_image_hdr *fwhdr)
  * execution context (driver/bios) must match.
  */
 static bool
-bfa_ioc_fwver_valid(struct bfa_ioc *ioc)
+bfa_ioc_fwver_valid(struct bfa_ioc *ioc, u32 boot_env)
 {
 	struct bfi_ioc_image_hdr fwhdr, *drv_fwhdr;
 
@@ -1325,7 +1325,7 @@ bfa_ioc_fwver_valid(struct bfa_ioc *ioc)
 	if (fwhdr.signature != drv_fwhdr->signature)
 		return false;
 
-	if (fwhdr.exec != drv_fwhdr->exec)
+	if (swab32(fwhdr.param) != boot_env)
 		return false;
 
 	return bfa_nw_ioc_fwver_cmp(ioc, &fwhdr);
@@ -1352,9 +1352,12 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 {
 	enum bfi_ioc_state ioc_fwstate;
 	bool fwvalid;
+	u32 boot_env;
 
 	ioc_fwstate = readl(ioc->ioc_regs.ioc_fwstate);
 
+	boot_env = BFI_BOOT_LOADER_OS;
+
 	if (force)
 		ioc_fwstate = BFI_IOC_UNINIT;
 
@@ -1362,10 +1365,10 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 	 * check if firmware is valid
 	 */
 	fwvalid = (ioc_fwstate == BFI_IOC_UNINIT) ?
-		false : bfa_ioc_fwver_valid(ioc);
+		false : bfa_ioc_fwver_valid(ioc, boot_env);
 
 	if (!fwvalid) {
-		bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, ioc->pcidev.device_id);
+		bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, boot_env);
 		return;
 	}
 
@@ -1396,7 +1399,7 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 	/**
 	 * Initialize the h/w for any other states.
 	 */
-	bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, ioc->pcidev.device_id);
+	bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, boot_env);
 }
 
 void
@@ -1506,10 +1509,10 @@ bfa_ioc_hb_stop(struct bfa_ioc *ioc)
  */
 static void
 bfa_ioc_download_fw(struct bfa_ioc *ioc, u32 boot_type,
-		    u32 boot_param)
+		    u32 boot_env)
 {
 	u32 *fwimg;
-	u32 pgnum, pgoff;
+	u32 pgnum;
 	u32 loff = 0;
 	u32 chunkno = 0;
 	u32 i;
@@ -1522,7 +1525,6 @@ bfa_ioc_download_fw(struct bfa_ioc *ioc, u32 boot_type,
 	fwimg = bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), chunkno);
 
 	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
-	pgoff = bfa_ioc_smem_pgoff(ioc, loff);
 
 	writel(pgnum, ioc->ioc_regs.host_page_num_fn);
 
@@ -1558,10 +1560,10 @@ bfa_ioc_download_fw(struct bfa_ioc *ioc, u32 boot_type,
 	/*
 	 * Set boot type and boot param at the end.
 	*/
-	writel((swab32(swab32(boot_type))), ((ioc->ioc_regs.smem_page_start)
+	writel(boot_type, ((ioc->ioc_regs.smem_page_start)
 			+ (BFI_BOOT_TYPE_OFF)));
-	writel((swab32(swab32(boot_param))), ((ioc->ioc_regs.smem_page_start)
-			+ (BFI_BOOT_PARAM_OFF)));
+	writel(boot_env, ((ioc->ioc_regs.smem_page_start)
+			+ (BFI_BOOT_LOADER_OFF)));
 }
 
 static void
@@ -1721,7 +1723,7 @@ bfa_ioc_pll_init(struct bfa_ioc *ioc)
  * as the entry vector.
  */
 static void
-bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type, u32 boot_param)
+bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type, u32 boot_env)
 {
 	void __iomem *rb;
 
@@ -1734,7 +1736,7 @@ bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type, u32 boot_param)
 	 * Initialize IOC state of all functions on a chip reset.
 	 */
 	rb = ioc->pcidev.pci_bar_kva;
-	if (boot_param == BFI_BOOT_TYPE_MEMTEST) {
+	if (boot_type == BFI_BOOT_TYPE_MEMTEST) {
 		writel(BFI_IOC_MEMTEST, (rb + BFA_IOC0_STATE_REG));
 		writel(BFI_IOC_MEMTEST, (rb + BFA_IOC1_STATE_REG));
 	} else {
@@ -1743,7 +1745,7 @@ bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type, u32 boot_param)
 	}
 
 	bfa_ioc_msgflush(ioc);
-	bfa_ioc_download_fw(ioc, boot_type, boot_param);
+	bfa_ioc_download_fw(ioc, boot_type, boot_env);
 
 	/**
 	 * Enable interrupts just before starting LPU
@@ -1920,12 +1922,6 @@ bfa_ioc_smem_pgnum(struct bfa_ioc *ioc, u32 fmaddr)
 	return PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, fmaddr);
 }
 
-static u32
-bfa_ioc_smem_pgoff(struct bfa_ioc *ioc, u32 fmaddr)
-{
-	return PSS_SMEM_PGOFF(fmaddr);
-}
-
 /**
  * Register mailbox message handler function, to be called by common modules
  */
@@ -2219,13 +2215,9 @@ bfa_nw_ioc_get_mac(struct bfa_ioc *ioc)
 static void
 bfa_ioc_recover(struct bfa_ioc *ioc)
 {
-	u16 bdf;
-
-	bdf = (ioc->pcidev.pci_slot << 8 | ioc->pcidev.pci_func << 3 |
-					ioc->pcidev.device_id);
-
-	pr_crit("Firmware heartbeat failure at %d", bdf);
-	BUG_ON(1);
+	pr_crit("Heart Beat of IOC has failed\n");
+	bfa_ioc_stats(ioc, ioc_hbfails);
+	bfa_fsm_send_event(ioc, IOC_E_HBFAIL);
 }
 
 static void
diff --git a/drivers/net/bna/bfa_ioc.h b/drivers/net/bna/bfa_ioc.h
index e4974bc24ef..bd48abee781 100644
--- a/drivers/net/bna/bfa_ioc.h
+++ b/drivers/net/bna/bfa_ioc.h
@@ -194,6 +194,7 @@ struct bfa_ioc_hwif {
 					bool msix);
 	void		(*ioc_notify_fail)	(struct bfa_ioc *ioc);
 	void		(*ioc_ownership_reset)	(struct bfa_ioc *ioc);
+	bool		(*ioc_sync_start)       (struct bfa_ioc *ioc);
 	void		(*ioc_sync_join)	(struct bfa_ioc *ioc);
 	void		(*ioc_sync_leave)	(struct bfa_ioc *ioc);
 	void		(*ioc_sync_ack)		(struct bfa_ioc *ioc);
diff --git a/drivers/net/bna/bfa_ioc_ct.c b/drivers/net/bna/bfa_ioc_ct.c
index 469997c4ffd..87aecdf22cf 100644
--- a/drivers/net/bna/bfa_ioc_ct.c
+++ b/drivers/net/bna/bfa_ioc_ct.c
@@ -41,6 +41,7 @@ static void bfa_ioc_ct_map_port(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix);
 static void bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc);
+static bool bfa_ioc_ct_sync_start(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_sync_join(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_sync_leave(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc);
@@ -63,6 +64,7 @@ bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc)
 	nw_hwif_ct.ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set;
 	nw_hwif_ct.ioc_notify_fail = bfa_ioc_ct_notify_fail;
 	nw_hwif_ct.ioc_ownership_reset = bfa_ioc_ct_ownership_reset;
+	nw_hwif_ct.ioc_sync_start = bfa_ioc_ct_sync_start;
 	nw_hwif_ct.ioc_sync_join = bfa_ioc_ct_sync_join;
 	nw_hwif_ct.ioc_sync_leave = bfa_ioc_ct_sync_leave;
 	nw_hwif_ct.ioc_sync_ack = bfa_ioc_ct_sync_ack;
@@ -345,6 +347,32 @@ bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc)
 /**
  * Synchronized IOC failure processing routines
  */
+static bool
+bfa_ioc_ct_sync_start(struct bfa_ioc *ioc)
+{
+	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+	u32 sync_reqd = bfa_ioc_ct_get_sync_reqd(r32);
+
+	/*
+	 * Driver load time.  If the sync required bit for this PCI fn
+	 * is set, it is due to an unclean exit by the driver for this
+	 * PCI fn in the previous incarnation. Whoever comes here first
+	 * should clean it up, no matter which PCI fn.
+	 */
+
+	if (sync_reqd & bfa_ioc_ct_sync_pos(ioc)) {
+		writel(0, ioc->ioc_regs.ioc_fail_sync);
+		writel(1, ioc->ioc_regs.ioc_usage_reg);
+		writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate);
+		writel(BFI_IOC_UNINIT, ioc->ioc_regs.alt_ioc_fwstate);
+		return true;
+	}
+
+	return bfa_ioc_ct_sync_complete(ioc);
+}
+/**
+ * Synchronized IOC failure processing routines
+ */
 static void
 bfa_ioc_ct_sync_join(struct bfa_ioc *ioc)
 {
diff --git a/drivers/net/bna/bfi.h b/drivers/net/bna/bfi.h
index a9739681105..6050379526f 100644
--- a/drivers/net/bna/bfi.h
+++ b/drivers/net/bna/bfi.h
@@ -184,12 +184,14 @@ enum bfi_mclass {
 #define BFI_IOC_MSGLEN_MAX	32	/* 32 bytes */
 
 #define BFI_BOOT_TYPE_OFF		8
-#define BFI_BOOT_PARAM_OFF		12
+#define BFI_BOOT_LOADER_OFF		12
 
-#define BFI_BOOT_TYPE_NORMAL 		0	/* param is device id */
+#define BFI_BOOT_TYPE_NORMAL 		0
 #define	BFI_BOOT_TYPE_FLASH		1
 #define	BFI_BOOT_TYPE_MEMTEST		2
 
+#define BFI_BOOT_LOADER_OS		0
+
 #define BFI_BOOT_MEMTEST_RES_ADDR   0x900
 #define BFI_BOOT_MEMTEST_RES_SIG    0xA0A1A2A3
 
diff --git a/drivers/net/bna/bna_ctrl.c b/drivers/net/bna/bna_ctrl.c
index e1527472b96..53b14169e36 100644
--- a/drivers/net/bna/bna_ctrl.c
+++ b/drivers/net/bna/bna_ctrl.c
@@ -246,7 +246,6 @@ static void
 bna_mbox_flush_q(struct bna *bna, struct list_head *q)
 {
 	struct bna_mbox_qe *mb_qe = NULL;
-	struct bfi_mhdr *cmd_h;
 	struct list_head			*mb_q;
 	void 			(*cbfn)(void *arg, int status);
 	void 			*cbarg;
@@ -260,7 +259,6 @@ bna_mbox_flush_q(struct bna *bna, struct list_head *q)
 		bfa_q_qe_init(mb_qe);
 		bna->mbox_mod.msg_pending--;
 
-		cmd_h = (struct bfi_mhdr *)(&mb_qe->cmd.msg[0]);
 		if (cbfn)
 			cbfn(cbarg, BNA_CB_NOT_EXEC);
 	}
@@ -2774,23 +2772,6 @@ bna_rit_mod_init(struct bna_rit_mod *rit_mod,
 	}
 }
 
-static void
-bna_rit_mod_uninit(struct bna_rit_mod *rit_mod)
-{
-	struct bna_rit_segment *rit_segment;
-	struct list_head *qe;
-	int i;
-	int j;
-
-	for (i = 0; i < BFI_RIT_SEG_TOTAL_POOLS; i++) {
-		j = 0;
-		list_for_each(qe, &rit_mod->rit_seg_pool[i]) {
-			rit_segment = (struct bna_rit_segment *)qe;
-			j++;
-		}
-	}
-}
-
 /*
  * Public functions
  */
@@ -2977,8 +2958,6 @@ bna_uninit(struct bna *bna)
 
 	bna_ucam_mod_uninit(&bna->ucam_mod);
 
-	bna_rit_mod_uninit(&bna->rit_mod);
-
 	bna_ib_mod_uninit(&bna->ib_mod);
 
 	bna_rx_mod_uninit(&bna->rx_mod);
diff --git a/drivers/net/bna/bna_hw.h b/drivers/net/bna/bna_hw.h
index 806b224a4c6..6cb89692f5c 100644
--- a/drivers/net/bna/bna_hw.h
+++ b/drivers/net/bna/bna_hw.h
@@ -897,7 +897,7 @@ static struct bna_ritseg_pool_cfg name[BFI_RIT_SEG_TOTAL_POOLS] =	\
  * Catapult RSS Table Base Offset Address
  *
  * Exists in RAD memory space.
- * Each entry is 352 bits, but alligned on
+ * Each entry is 352 bits, but aligned on
  * 64 byte (512 bit) boundary. Accessed
  * 4 byte words, the whole entry can be
  * broken into 11 word accesses.
diff --git a/drivers/net/bna/bna_txrx.c b/drivers/net/bna/bna_txrx.c
index 58c7664040d..380085cc308 100644
--- a/drivers/net/bna/bna_txrx.c
+++ b/drivers/net/bna/bna_txrx.c
@@ -2229,14 +2229,11 @@ void
 bna_rit_create(struct bna_rx *rx)
 {
 	struct list_head	*qe_rxp;
-	struct bna *bna;
 	struct bna_rxp *rxp;
 	struct bna_rxq *q0 = NULL;
 	struct bna_rxq *q1 = NULL;
 	int offset;
 
-	bna = rx->bna;
-
 	offset = 0;
 	list_for_each(qe_rxp, &rx->rxp_q) {
 		rxp = (struct bna_rxp *)qe_rxp;
@@ -2830,7 +2827,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad,
 	struct bna_mem_descr *dsqpt_mem;	/* s/w qpt for data */
 	struct bna_mem_descr *hpage_mem;	/* hdr page mem */
 	struct bna_mem_descr *dpage_mem;	/* data page mem */
-	int i, cpage_idx = 0, dpage_idx = 0, hpage_idx = 0, ret;
+	int i, cpage_idx = 0, dpage_idx = 0, hpage_idx = 0;
 	int dpage_count, hpage_count, rcb_idx;
 	struct bna_ib_config ibcfg;
 	/* Fail if we don't have enough RXPs, RXQs */
@@ -2924,7 +2921,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad,
 		ibcfg.interpkt_timeo = BFI_RX_INTERPKT_TIMEO;
 		ibcfg.ctrl_flags = BFI_IB_CF_INT_ENABLE;
 
-		ret = bna_ib_config(rxp->cq.ib, &ibcfg);
+		bna_ib_config(rxp->cq.ib, &ibcfg);
 
 		/* Link rxqs to rxp */
 		_rxp_add_rxqs(rxp, q0, q1);
diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c
index 9f356d5d0f3..e588511f47f 100644
--- a/drivers/net/bna/bnad.c
+++ b/drivers/net/bna/bnad.c
@@ -501,7 +501,7 @@ bnad_poll_cq(struct bnad *bnad, struct bna_ccb *ccb, int budget)
 
 		skb_put(skb, ntohs(cmpl->length));
 		if (likely
-		    (bnad->rx_csum &&
+		    ((bnad->netdev->features & NETIF_F_RXCSUM) &&
 		     (((flags & BNA_CQ_EF_IPV4) &&
 		      (flags & BNA_CQ_EF_L3_CKSUM_OK)) ||
 		      (flags & BNA_CQ_EF_IPV6)) &&
@@ -1837,7 +1837,6 @@ bnad_setup_rx(struct bnad *bnad, uint rx_id)
 	/* Initialize the Rx event handlers */
 	rx_cbfn.rcb_setup_cbfn = bnad_cb_rcb_setup;
 	rx_cbfn.rcb_destroy_cbfn = bnad_cb_rcb_destroy;
-	rx_cbfn.rcb_destroy_cbfn = NULL;
 	rx_cbfn.ccb_setup_cbfn = bnad_cb_ccb_setup;
 	rx_cbfn.ccb_destroy_cbfn = bnad_cb_ccb_destroy;
 	rx_cbfn.rx_cleanup_cbfn = bnad_cb_rx_cleanup;
@@ -2903,23 +2902,20 @@ bnad_netdev_init(struct bnad *bnad, bool using_dac)
 {
 	struct net_device *netdev = bnad->netdev;
 
-	netdev->features |= NETIF_F_IPV6_CSUM;
-	netdev->features |= NETIF_F_TSO;
-	netdev->features |= NETIF_F_TSO6;
+	netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_HW_VLAN_TX;
 
-	netdev->features |= NETIF_F_GRO;
-	pr_warn("bna: GRO enabled, using kernel stack GRO\n");
+	netdev->vlan_features = NETIF_F_SG | NETIF_F_HIGHDMA |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO6;
 
-	netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+	netdev->features |= netdev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
 
 	if (using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	netdev->features |=
-		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
-		NETIF_F_HW_VLAN_FILTER;
-
-	netdev->vlan_features = netdev->features;
 	netdev->mem_start = bnad->mmio_start;
 	netdev->mem_end = bnad->mmio_start + bnad->mmio_len - 1;
 
@@ -2970,7 +2966,6 @@ bnad_init(struct bnad *bnad,
 
 	bnad->txq_depth = BNAD_TXQ_DEPTH;
 	bnad->rxq_depth = BNAD_RXQ_DEPTH;
-	bnad->rx_csum = true;
 
 	bnad->tx_coalescing_timeo = BFI_TX_COALESCING_TIMEO;
 	bnad->rx_coalescing_timeo = BFI_RX_COALESCING_TIMEO;
diff --git a/drivers/net/bna/bnad.h b/drivers/net/bna/bnad.h
index a89117fa497..ccdabad0a40 100644
--- a/drivers/net/bna/bnad.h
+++ b/drivers/net/bna/bnad.h
@@ -237,8 +237,6 @@ struct bnad {
 	struct bna_rx_config rx_config[BNAD_MAX_RXS];
 	struct bna_tx_config tx_config[BNAD_MAX_TXS];
 
-	u32		rx_csum;
-
 	void __iomem		*bar0;	/* BAR0 address */
 
 	struct bna bna;
diff --git a/drivers/net/bna/bnad_ethtool.c b/drivers/net/bna/bnad_ethtool.c
index 142d6047da2..3330cd78da2 100644
--- a/drivers/net/bna/bnad_ethtool.c
+++ b/drivers/net/bna/bnad_ethtool.c
@@ -237,10 +237,10 @@ bnad_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
 	cmd->phy_address = 0;
 
 	if (netif_carrier_ok(netdev)) {
-		cmd->speed = SPEED_10000;
+		ethtool_cmd_speed_set(cmd, SPEED_10000);
 		cmd->duplex = DUPLEX_FULL;
 	} else {
-		cmd->speed = -1;
+		ethtool_cmd_speed_set(cmd, -1);
 		cmd->duplex = -1;
 	}
 	cmd->transceiver = XCVR_EXTERNAL;
@@ -256,7 +256,8 @@ bnad_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
 	/* 10G full duplex setting supported only */
 	if (cmd->autoneg == AUTONEG_ENABLE)
 		return -EOPNOTSUPP; else {
-		if ((cmd->speed == SPEED_10000) && (cmd->duplex == DUPLEX_FULL))
+		if ((ethtool_cmd_speed(cmd) == SPEED_10000)
+		    && (cmd->duplex == DUPLEX_FULL))
 			return 0;
 	}
 
@@ -806,61 +807,6 @@ bnad_set_pauseparam(struct net_device *netdev,
 	return 0;
 }
 
-static u32
-bnad_get_rx_csum(struct net_device *netdev)
-{
-	u32 rx_csum;
-	struct bnad *bnad = netdev_priv(netdev);
-
-	rx_csum = bnad->rx_csum;
-	return rx_csum;
-}
-
-static int
-bnad_set_rx_csum(struct net_device *netdev, u32 rx_csum)
-{
-	struct bnad *bnad = netdev_priv(netdev);
-
-	mutex_lock(&bnad->conf_mutex);
-	bnad->rx_csum = rx_csum;
-	mutex_unlock(&bnad->conf_mutex);
-	return 0;
-}
-
-static int
-bnad_set_tx_csum(struct net_device *netdev, u32 tx_csum)
-{
-	struct bnad *bnad = netdev_priv(netdev);
-
-	mutex_lock(&bnad->conf_mutex);
-	if (tx_csum) {
-		netdev->features |= NETIF_F_IP_CSUM;
-		netdev->features |= NETIF_F_IPV6_CSUM;
-	} else {
-		netdev->features &= ~NETIF_F_IP_CSUM;
-		netdev->features &= ~NETIF_F_IPV6_CSUM;
-	}
-	mutex_unlock(&bnad->conf_mutex);
-	return 0;
-}
-
-static int
-bnad_set_tso(struct net_device *netdev, u32 tso)
-{
-	struct bnad *bnad = netdev_priv(netdev);
-
-	mutex_lock(&bnad->conf_mutex);
-	if (tso) {
-		netdev->features |= NETIF_F_TSO;
-		netdev->features |= NETIF_F_TSO6;
-	} else {
-		netdev->features &= ~NETIF_F_TSO;
-		netdev->features &= ~NETIF_F_TSO6;
-	}
-	mutex_unlock(&bnad->conf_mutex);
-	return 0;
-}
-
 static void
 bnad_get_strings(struct net_device *netdev, u32 stringset, u8 * string)
 {
@@ -1256,14 +1202,6 @@ static struct ethtool_ops bnad_ethtool_ops = {
 	.set_ringparam = bnad_set_ringparam,
 	.get_pauseparam = bnad_get_pauseparam,
 	.set_pauseparam = bnad_set_pauseparam,
-	.get_rx_csum = bnad_get_rx_csum,
-	.set_rx_csum = bnad_set_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = bnad_set_tx_csum,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = bnad_set_tso,
 	.get_strings = bnad_get_strings,
 	.get_ethtool_stats = bnad_get_ethtool_stats,
 	.get_sset_count = bnad_get_sset_count
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 8e6d618b530..57d3293c65b 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -3174,7 +3174,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		}
 
 		skb_checksum_none_assert(skb);
-		if (bp->rx_csum &&
+		if ((bp->dev->features & NETIF_F_RXCSUM) &&
 			(status & (L2_FHDR_STATUS_TCP_SEGMENT |
 			L2_FHDR_STATUS_UDP_DATAGRAM))) {
 
@@ -6696,17 +6696,16 @@ bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	if (bp->autoneg & AUTONEG_SPEED) {
 		cmd->autoneg = AUTONEG_ENABLE;
-	}
-	else {
+	} else {
 		cmd->autoneg = AUTONEG_DISABLE;
 	}
 
 	if (netif_carrier_ok(dev)) {
-		cmd->speed = bp->line_speed;
+		ethtool_cmd_speed_set(cmd, bp->line_speed);
 		cmd->duplex = bp->duplex;
 	}
 	else {
-		cmd->speed = -1;
+		ethtool_cmd_speed_set(cmd, -1);
 		cmd->duplex = -1;
 	}
 	spin_unlock_bh(&bp->phy_lock);
@@ -6758,21 +6757,21 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		advertising |= ADVERTISED_Autoneg;
 	}
 	else {
+		u32 speed = ethtool_cmd_speed(cmd);
 		if (cmd->port == PORT_FIBRE) {
-			if ((cmd->speed != SPEED_1000 &&
-			     cmd->speed != SPEED_2500) ||
+			if ((speed != SPEED_1000 &&
+			     speed != SPEED_2500) ||
 			    (cmd->duplex != DUPLEX_FULL))
 				goto err_out_unlock;
 
-			if (cmd->speed == SPEED_2500 &&
+			if (speed == SPEED_2500 &&
 			    !(bp->phy_flags & BNX2_PHY_FLAG_2_5G_CAPABLE))
 				goto err_out_unlock;
-		}
-		else if (cmd->speed == SPEED_1000 || cmd->speed == SPEED_2500)
+		} else if (speed == SPEED_1000 || speed == SPEED_2500)
 			goto err_out_unlock;
 
 		autoneg &= ~AUTONEG_SPEED;
-		req_line_speed = cmd->speed;
+		req_line_speed = speed;
 		req_duplex = cmd->duplex;
 		advertising = 0;
 	}
@@ -7189,38 +7188,6 @@ bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
 	return 0;
 }
 
-static u32
-bnx2_get_rx_csum(struct net_device *dev)
-{
-	struct bnx2 *bp = netdev_priv(dev);
-
-	return bp->rx_csum;
-}
-
-static int
-bnx2_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct bnx2 *bp = netdev_priv(dev);
-
-	bp->rx_csum = data;
-	return 0;
-}
-
-static int
-bnx2_set_tso(struct net_device *dev, u32 data)
-{
-	struct bnx2 *bp = netdev_priv(dev);
-
-	if (data) {
-		dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
-		if (CHIP_NUM(bp) == CHIP_NUM_5709)
-			dev->features |= NETIF_F_TSO6;
-	} else
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6 |
-				   NETIF_F_TSO_ECN);
-	return 0;
-}
-
 static struct {
 	char string[ETH_GSTRING_LEN];
 } bnx2_stats_str_arr[] = {
@@ -7495,82 +7462,74 @@ bnx2_get_ethtool_stats(struct net_device *dev,
 }
 
 static int
-bnx2_phys_id(struct net_device *dev, u32 data)
+bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state)
 {
 	struct bnx2 *bp = netdev_priv(dev);
-	int i;
-	u32 save;
 
-	bnx2_set_power_state(bp, PCI_D0);
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		bnx2_set_power_state(bp, PCI_D0);
+
+		bp->leds_save = REG_RD(bp, BNX2_MISC_CFG);
+		REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
+		return 1;	/* cycle on/off once per second */
+
+	case ETHTOOL_ID_ON:
+		REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
+		       BNX2_EMAC_LED_1000MB_OVERRIDE |
+		       BNX2_EMAC_LED_100MB_OVERRIDE |
+		       BNX2_EMAC_LED_10MB_OVERRIDE |
+		       BNX2_EMAC_LED_TRAFFIC_OVERRIDE |
+		       BNX2_EMAC_LED_TRAFFIC);
+		break;
 
-	if (data == 0)
-		data = 2;
+	case ETHTOOL_ID_OFF:
+		REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE);
+		break;
 
-	save = REG_RD(bp, BNX2_MISC_CFG);
-	REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
+	case ETHTOOL_ID_INACTIVE:
+		REG_WR(bp, BNX2_EMAC_LED, 0);
+		REG_WR(bp, BNX2_MISC_CFG, bp->leds_save);
 
-	for (i = 0; i < (data * 2); i++) {
-		if ((i % 2) == 0) {
-			REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE);
-		}
-		else {
-			REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
-				BNX2_EMAC_LED_1000MB_OVERRIDE |
-				BNX2_EMAC_LED_100MB_OVERRIDE |
-				BNX2_EMAC_LED_10MB_OVERRIDE |
-				BNX2_EMAC_LED_TRAFFIC_OVERRIDE |
-				BNX2_EMAC_LED_TRAFFIC);
-		}
-		msleep_interruptible(500);
-		if (signal_pending(current))
-			break;
+		if (!netif_running(dev))
+			bnx2_set_power_state(bp, PCI_D3hot);
+		break;
 	}
-	REG_WR(bp, BNX2_EMAC_LED, 0);
-	REG_WR(bp, BNX2_MISC_CFG, save);
-
-	if (!netif_running(dev))
-		bnx2_set_power_state(bp, PCI_D3hot);
 
 	return 0;
 }
 
-static int
-bnx2_set_tx_csum(struct net_device *dev, u32 data)
+static u32
+bnx2_fix_features(struct net_device *dev, u32 features)
 {
 	struct bnx2 *bp = netdev_priv(dev);
 
-	if (CHIP_NUM(bp) == CHIP_NUM_5709)
-		return ethtool_op_set_tx_ipv6_csum(dev, data);
-	else
-		return ethtool_op_set_tx_csum(dev, data);
+	if (!(bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
+		features |= NETIF_F_HW_VLAN_RX;
+
+	return features;
 }
 
 static int
-bnx2_set_flags(struct net_device *dev, u32 data)
+bnx2_set_features(struct net_device *dev, u32 features)
 {
 	struct bnx2 *bp = netdev_priv(dev);
-	int rc;
-
-	if (!(bp->flags & BNX2_FLAG_CAN_KEEP_VLAN) &&
-	    !(data & ETH_FLAG_RXVLAN))
-		return -EINVAL;
 
 	/* TSO with VLAN tag won't work with current firmware */
-	if (!(data & ETH_FLAG_TXVLAN))
-		return -EINVAL;
-
-	rc = ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH | ETH_FLAG_RXVLAN |
-				  ETH_FLAG_TXVLAN);
-	if (rc)
-		return rc;
+	if (features & NETIF_F_HW_VLAN_TX)
+		dev->vlan_features |= (dev->hw_features & NETIF_F_ALL_TSO);
+	else
+		dev->vlan_features &= ~NETIF_F_ALL_TSO;
 
-	if ((!!(data & ETH_FLAG_RXVLAN) !=
+	if ((!!(features & NETIF_F_HW_VLAN_RX) !=
 	    !!(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) &&
 	    netif_running(dev)) {
 		bnx2_netif_stop(bp, false);
+		dev->features = features;
 		bnx2_set_rx_mode(dev);
 		bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);
 		bnx2_netif_start(bp, false);
+		return 1;
 	}
 
 	return 0;
@@ -7595,18 +7554,11 @@ static const struct ethtool_ops bnx2_ethtool_ops = {
 	.set_ringparam		= bnx2_set_ringparam,
 	.get_pauseparam		= bnx2_get_pauseparam,
 	.set_pauseparam		= bnx2_set_pauseparam,
-	.get_rx_csum		= bnx2_get_rx_csum,
-	.set_rx_csum		= bnx2_set_rx_csum,
-	.set_tx_csum		= bnx2_set_tx_csum,
-	.set_sg			= ethtool_op_set_sg,
-	.set_tso		= bnx2_set_tso,
 	.self_test		= bnx2_self_test,
 	.get_strings		= bnx2_get_strings,
-	.phys_id		= bnx2_phys_id,
+	.set_phys_id		= bnx2_set_phys_id,
 	.get_ethtool_stats	= bnx2_get_ethtool_stats,
 	.get_sset_count		= bnx2_get_sset_count,
-	.set_flags		= bnx2_set_flags,
-	.get_flags		= ethtool_op_get_flags,
 };
 
 /* Called with rtnl_lock */
@@ -8118,8 +8070,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->tx_ring_size = MAX_TX_DESC_CNT;
 	bnx2_set_rx_ring_size(bp, 255);
 
-	bp->rx_csum = 1;
-
 	bp->tx_quick_cons_trip_int = 2;
 	bp->tx_quick_cons_trip = 20;
 	bp->tx_ticks_int = 18;
@@ -8311,17 +8261,14 @@ static const struct net_device_ops bnx2_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= bnx2_change_mac_addr,
 	.ndo_change_mtu		= bnx2_change_mtu,
+	.ndo_fix_features	= bnx2_fix_features,
+	.ndo_set_features	= bnx2_set_features,
 	.ndo_tx_timeout		= bnx2_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= poll_bnx2,
 #endif
 };
 
-static inline void vlan_features_add(struct net_device *dev, u32 flags)
-{
-	dev->vlan_features |= flags;
-}
-
 static int __devinit
 bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -8361,20 +8308,17 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	memcpy(dev->dev_addr, bp->mac_addr, 6);
 	memcpy(dev->perm_addr, bp->mac_addr, 6);
 
-	dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_GRO |
-			 NETIF_F_RXHASH;
-	vlan_features_add(dev, NETIF_F_IP_CSUM | NETIF_F_SG);
-	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
-		dev->features |= NETIF_F_IPV6_CSUM;
-		vlan_features_add(dev, NETIF_F_IPV6_CSUM);
-	}
-	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-	dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
-	vlan_features_add(dev, NETIF_F_TSO | NETIF_F_TSO_ECN);
-	if (CHIP_NUM(bp) == CHIP_NUM_5709) {
-		dev->features |= NETIF_F_TSO6;
-		vlan_features_add(dev, NETIF_F_TSO6);
-	}
+	dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+		NETIF_F_TSO | NETIF_F_TSO_ECN |
+		NETIF_F_RXHASH | NETIF_F_RXCSUM;
+
+	if (CHIP_NUM(bp) == CHIP_NUM_5709)
+		dev->hw_features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+
+	dev->vlan_features = dev->hw_features;
+	dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+	dev->features |= dev->hw_features;
+
 	if ((rc = register_netdev(dev))) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
 		goto error;
@@ -8413,6 +8357,8 @@ bnx2_remove_one(struct pci_dev *pdev)
 
 	unregister_netdev(dev);
 
+	del_timer_sync(&bp->timer);
+
 	if (bp->mips_firmware)
 		release_firmware(bp->mips_firmware);
 	if (bp->rv2p_firmware)
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 68020451dc4..bf371f6fe15 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6754,8 +6754,6 @@ struct bnx2 {
 	u32			rx_max_ring_idx;
 	u32			rx_max_pg_ring_idx;
 
-	u32			rx_csum;
-
 	/* TX constants */
 	int		tx_ring_size;
 	u32		tx_wake_thresh;
@@ -6922,6 +6920,7 @@ struct bnx2 {
 	u8			num_tx_rings;
 	u8			num_rx_rings;
 
+	u32 			leds_save;
 	u32			idle_chk_status_idx;
 
 #ifdef BCM_CNIC
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index b7ff87b35fb..668a578c49e 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1,6 +1,6 @@
 /* bnx2x.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,8 +22,8 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
-#define DRV_MODULE_VERSION      "1.62.11-0"
-#define DRV_MODULE_RELDATE      "2011/01/31"
+#define DRV_MODULE_VERSION      "1.62.12-0"
+#define DRV_MODULE_RELDATE      "2011/03/20"
 #define BNX2X_BC_VER            0x040200
 
 #define BNX2X_MULTI_QUEUE
@@ -473,7 +473,8 @@ struct bnx2x_fastpath {
 #define NUM_RX_BD			(RX_DESC_CNT * NUM_RX_RINGS)
 #define MAX_RX_BD			(NUM_RX_BD - 1)
 #define MAX_RX_AVAIL			(MAX_RX_DESC_CNT * NUM_RX_RINGS - 2)
-#define MIN_RX_AVAIL			128
+#define MIN_RX_SIZE_TPA			72
+#define MIN_RX_SIZE_NONTPA		10
 #define INIT_JUMBO_RX_RING_SIZE		MAX_RX_AVAIL
 #define INIT_RX_RING_SIZE		MAX_RX_AVAIL
 #define NEXT_RX_IDX(x)		((((x) & RX_DESC_MASK) == \
@@ -893,6 +894,22 @@ typedef enum {
 	(&bp->def_status_blk->sp_sb.\
 	index_values[HC_SP_INDEX_EQ_CONS])
 
+/* This is a data that will be used to create a link report message.
+ * We will keep the data used for the last link report in order
+ * to prevent reporting the same link parameters twice.
+ */
+struct bnx2x_link_report_data {
+	u16 line_speed;			/* Effective line speed */
+	unsigned long link_report_flags;/* BNX2X_LINK_REPORT_XXX flags */
+};
+
+enum {
+	BNX2X_LINK_REPORT_FD,		/* Full DUPLEX */
+	BNX2X_LINK_REPORT_LINK_DOWN,
+	BNX2X_LINK_REPORT_RX_FC_ON,
+	BNX2X_LINK_REPORT_TX_FC_ON,
+};
+
 struct bnx2x {
 	/* Fields used in the tx and intr/napi performance paths
 	 * are grouped together in the beginning of the structure
@@ -918,7 +935,6 @@ struct bnx2x {
 
 	int			tx_ring_size;
 
-	u32			rx_csum;
 /* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
 #define ETH_OVREHEAD		(ETH_HLEN + 8 + 8)
 #define ETH_MIN_PACKET_SIZE		60
@@ -1026,6 +1042,9 @@ struct bnx2x {
 
 	struct link_params	link_params;
 	struct link_vars	link_vars;
+	u32			link_cnt;
+	struct bnx2x_link_report_data last_reported_link;
+
 	struct mdio_if_info	mdio;
 
 	struct bnx2x_common	common;
@@ -1220,9 +1239,13 @@ struct bnx2x {
 	struct bnx2x_dcbx_port_params		dcbx_port_params;
 	int					dcb_version;
 
-	/* DCBX Negotation results */
+	/* DCBX Negotiation results */
 	struct dcbx_features			dcbx_local_feat;
 	u32					dcbx_error;
+#ifdef BCM_DCBNL
+	struct dcbx_features			dcbx_remote_feat;
+	u32					dcbx_remote_flags;
+#endif
 	u32					pending_max;
 };
 
@@ -1442,6 +1465,8 @@ struct bnx2x_func_init_params {
 #define WAIT_RAMROD_POLL	0x01
 #define WAIT_RAMROD_COMMON	0x02
 
+void bnx2x_read_mf_cfg(struct bnx2x *bp);
+
 /* dmae */
 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
 void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index e83ac6dd6fc..ca2bbc0e5d4 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -1,6 +1,6 @@
 /* bnx2x_cmn.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,6 +27,49 @@
 
 static int bnx2x_setup_irqs(struct bnx2x *bp);
 
+/**
+ * bnx2x_bz_fp - zero content of the fastpath structure.
+ *
+ * @bp:		driver handle
+ * @index:	fastpath index to be zeroed
+ *
+ * Makes sure the contents of the bp->fp[index].napi is kept
+ * intact.
+ */
+static inline void bnx2x_bz_fp(struct bnx2x *bp, int index)
+{
+	struct bnx2x_fastpath *fp = &bp->fp[index];
+	struct napi_struct orig_napi = fp->napi;
+	/* bzero bnx2x_fastpath contents */
+	memset(fp, 0, sizeof(*fp));
+
+	/* Restore the NAPI object as it has been already initialized */
+	fp->napi = orig_napi;
+}
+
+/**
+ * bnx2x_move_fp - move content of the fastpath structure.
+ *
+ * @bp:		driver handle
+ * @from:	source FP index
+ * @to:		destination FP index
+ *
+ * Makes sure the contents of the bp->fp[to].napi is kept
+ * intact.
+ */
+static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to)
+{
+	struct bnx2x_fastpath *from_fp = &bp->fp[from];
+	struct bnx2x_fastpath *to_fp = &bp->fp[to];
+	struct napi_struct orig_napi = to_fp->napi;
+	/* Move bnx2x_fastpath contents */
+	memcpy(to_fp, from_fp, sizeof(*to_fp));
+	to_fp->index = to;
+
+	/* Restore the NAPI object as it has been already initialized */
+	to_fp->napi = orig_napi;
+}
+
 /* free skb in the packet ring at pos idx
  * return idx of last bd freed
  */
@@ -265,13 +308,15 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
  */
 #define TPA_TSTAMP_OPT_LEN	12
 /**
- * Calculate the approximate value of the MSS for this
- * aggregation using the first packet of it.
+ * bnx2x_set_lro_mss - calculate the approximate value of the MSS
  *
- * @param bp
- * @param parsing_flags Parsing flags from the START CQE
- * @param len_on_bd Total length of the first packet for the
- *		     aggregation.
+ * @bp:			driver handle
+ * @parsing_flags:	parsing flags from the START CQE
+ * @len_on_bd:		total length of the first packet for the
+ *			aggregation.
+ *
+ * Approximate value of the MSS for this aggregation calculated using
+ * the first packet of it.
  */
 static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags,
 				    u16 len_on_bd)
@@ -640,7 +685,7 @@ reuse_rx:
 
 			skb_checksum_none_assert(skb);
 
-			if (bp->rx_csum) {
+			if (bp->dev->features & NETIF_F_RXCSUM) {
 				if (likely(BNX2X_RX_CSUM_OK(cqe)))
 					skb->ip_summed = CHECKSUM_UNNECESSARY;
 				else
@@ -758,35 +803,119 @@ u16 bnx2x_get_mf_speed(struct bnx2x *bp)
 	return line_speed;
 }
 
+/**
+ * bnx2x_fill_report_data - fill link report data to report
+ *
+ * @bp:		driver handle
+ * @data:	link state to update
+ *
+ * It uses a none-atomic bit operations because is called under the mutex.
+ */
+static inline void bnx2x_fill_report_data(struct bnx2x *bp,
+					  struct bnx2x_link_report_data *data)
+{
+	u16 line_speed = bnx2x_get_mf_speed(bp);
+
+	memset(data, 0, sizeof(*data));
+
+	/* Fill the report data: efective line speed */
+	data->line_speed = line_speed;
+
+	/* Link is down */
+	if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
+		__set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+			  &data->link_report_flags);
+
+	/* Full DUPLEX */
+	if (bp->link_vars.duplex == DUPLEX_FULL)
+		__set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags);
+
+	/* Rx Flow Control is ON */
+	if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
+		__set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
+
+	/* Tx Flow Control is ON */
+	if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
+		__set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
+}
+
+/**
+ * bnx2x_link_report - report link status to OS.
+ *
+ * @bp:		driver handle
+ *
+ * Calls the __bnx2x_link_report() under the same locking scheme
+ * as a link/PHY state managing code to ensure a consistent link
+ * reporting.
+ */
+
 void bnx2x_link_report(struct bnx2x *bp)
 {
-	if (bp->flags & MF_FUNC_DIS) {
-		netif_carrier_off(bp->dev);
-		netdev_err(bp->dev, "NIC Link is Down\n");
-		return;
-	}
+	bnx2x_acquire_phy_lock(bp);
+	__bnx2x_link_report(bp);
+	bnx2x_release_phy_lock(bp);
+}
 
-	if (bp->link_vars.link_up) {
-		u16 line_speed;
+/**
+ * __bnx2x_link_report - report link status to OS.
+ *
+ * @bp:		driver handle
+ *
+ * None atomic inmlementation.
+ * Should be called under the phy_lock.
+ */
+void __bnx2x_link_report(struct bnx2x *bp)
+{
+	struct bnx2x_link_report_data cur_data;
 
-		if (bp->state == BNX2X_STATE_OPEN)
-			netif_carrier_on(bp->dev);
-		netdev_info(bp->dev, "NIC Link is Up, ");
+	/* reread mf_cfg */
+	if (!CHIP_IS_E1(bp))
+		bnx2x_read_mf_cfg(bp);
 
-		line_speed = bnx2x_get_mf_speed(bp);
+	/* Read the current link report info */
+	bnx2x_fill_report_data(bp, &cur_data);
 
-		pr_cont("%d Mbps ", line_speed);
+	/* Don't report link down or exactly the same link status twice */
+	if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) ||
+	    (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+		      &bp->last_reported_link.link_report_flags) &&
+	     test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+		      &cur_data.link_report_flags)))
+		return;
+
+	bp->link_cnt++;
+
+	/* We are going to report a new link parameters now -
+	 * remember the current data for the next time.
+	 */
+	memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data));
 
-		if (bp->link_vars.duplex == DUPLEX_FULL)
+	if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+		     &cur_data.link_report_flags)) {
+		netif_carrier_off(bp->dev);
+		netdev_err(bp->dev, "NIC Link is Down\n");
+		return;
+	} else {
+		netif_carrier_on(bp->dev);
+		netdev_info(bp->dev, "NIC Link is Up, ");
+		pr_cont("%d Mbps ", cur_data.line_speed);
+
+		if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
+				       &cur_data.link_report_flags))
 			pr_cont("full duplex");
 		else
 			pr_cont("half duplex");
 
-		if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
-			if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
+		/* Handle the FC at the end so that only these flags would be
+		 * possibly set. This way we may easily check if there is no FC
+		 * enabled.
+		 */
+		if (cur_data.link_report_flags) {
+			if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+				     &cur_data.link_report_flags)) {
 				pr_cont(", receive ");
-				if (bp->link_vars.flow_ctrl &
-				    BNX2X_FLOW_CTRL_TX)
+				if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+				     &cur_data.link_report_flags))
 					pr_cont("& transmit ");
 			} else {
 				pr_cont(", transmit ");
@@ -794,62 +923,9 @@ void bnx2x_link_report(struct bnx2x *bp)
 			pr_cont("flow control ON");
 		}
 		pr_cont("\n");
-
-	} else { /* link_down */
-		netif_carrier_off(bp->dev);
-		netdev_err(bp->dev, "NIC Link is Down\n");
 	}
 }
 
-/* Returns the number of actually allocated BDs */
-static inline int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp,
-				      int rx_ring_size)
-{
-	struct bnx2x *bp = fp->bp;
-	u16 ring_prod, cqe_ring_prod;
-	int i;
-
-	fp->rx_comp_cons = 0;
-	cqe_ring_prod = ring_prod = 0;
-	for (i = 0; i < rx_ring_size; i++) {
-		if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
-			BNX2X_ERR("was only able to allocate "
-				  "%d rx skbs on queue[%d]\n", i, fp->index);
-			fp->eth_q_stats.rx_skb_alloc_failed++;
-			break;
-		}
-		ring_prod = NEXT_RX_IDX(ring_prod);
-		cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod);
-		WARN_ON(ring_prod <= i);
-	}
-
-	fp->rx_bd_prod = ring_prod;
-	/* Limit the CQE producer by the CQE ring size */
-	fp->rx_comp_prod = min_t(u16, NUM_RCQ_RINGS*RCQ_DESC_CNT,
-			       cqe_ring_prod);
-	fp->rx_pkt = fp->rx_calls = 0;
-
-	return i;
-}
-
-static inline void bnx2x_alloc_rx_bd_ring(struct bnx2x_fastpath *fp)
-{
-	struct bnx2x *bp = fp->bp;
-	int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
-					      MAX_RX_AVAIL/bp->num_queues;
-
-	rx_ring_size = max_t(int, MIN_RX_AVAIL, rx_ring_size);
-
-	bnx2x_alloc_rx_bds(fp, rx_ring_size);
-
-	/* Warning!
-	 * this will generate an interrupt (to the TSTORM)
-	 * must only be done after chip is initialized
-	 */
-	bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
-			     fp->rx_sge_prod);
-}
-
 void bnx2x_init_rx_rings(struct bnx2x *bp)
 {
 	int func = BP_FUNC(bp);
@@ -858,6 +934,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
 	u16 ring_prod;
 	int i, j;
 
+	/* Allocate TPA resources */
 	for_each_rx_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
@@ -865,6 +942,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
 		   "mtu %d  rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
 
 		if (!fp->disable_tpa) {
+			/* Fill the per-aggregation pool */
 			for (i = 0; i < max_agg_queues; i++) {
 				fp->tpa_pool[i].skb =
 				   netdev_alloc_skb(bp->dev, fp->rx_buf_size);
@@ -919,13 +997,13 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
 
 		fp->rx_bd_cons = 0;
 
-		bnx2x_set_next_page_rx_bd(fp);
-
-		/* CQ ring */
-		bnx2x_set_next_page_rx_cq(fp);
-
-		/* Allocate BDs and initialize BD ring */
-		bnx2x_alloc_rx_bd_ring(fp);
+		/* Activate BD ring */
+		/* Warning!
+		 * this will generate an interrupt (to the TSTORM)
+		 * must only be done after chip is initialized
+		 */
+		bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
+				     fp->rx_sge_prod);
 
 		if (j != 0)
 			continue;
@@ -959,27 +1037,40 @@ static void bnx2x_free_tx_skbs(struct bnx2x *bp)
 	}
 }
 
+static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp)
+{
+	struct bnx2x *bp = fp->bp;
+	int i;
+
+	/* ring wasn't allocated */
+	if (fp->rx_buf_ring == NULL)
+		return;
+
+	for (i = 0; i < NUM_RX_BD; i++) {
+		struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
+		struct sk_buff *skb = rx_buf->skb;
+
+		if (skb == NULL)
+			continue;
+
+		dma_unmap_single(&bp->pdev->dev,
+				 dma_unmap_addr(rx_buf, mapping),
+				 fp->rx_buf_size, DMA_FROM_DEVICE);
+
+		rx_buf->skb = NULL;
+		dev_kfree_skb(skb);
+	}
+}
+
 static void bnx2x_free_rx_skbs(struct bnx2x *bp)
 {
-	int i, j;
+	int j;
 
 	for_each_rx_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
-		for (i = 0; i < NUM_RX_BD; i++) {
-			struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
-			struct sk_buff *skb = rx_buf->skb;
-
-			if (skb == NULL)
-				continue;
+		bnx2x_free_rx_bds(fp);
 
-			dma_unmap_single(&bp->pdev->dev,
-					 dma_unmap_addr(rx_buf, mapping),
-					 fp->rx_buf_size, DMA_FROM_DEVICE);
-
-			rx_buf->skb = NULL;
-			dev_kfree_skb(skb);
-		}
 		if (!fp->disable_tpa)
 			bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
 					    ETH_MAX_AGGREGATION_QUEUES_E1 :
@@ -1345,29 +1436,47 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
+	/* Set the initial link reported state to link down */
+	bnx2x_acquire_phy_lock(bp);
+	memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
+	__set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+		&bp->last_reported_link.link_report_flags);
+	bnx2x_release_phy_lock(bp);
+
 	/* must be called before memory allocation and HW init */
 	bnx2x_ilt_set_info(bp);
 
+	/* zero fastpath structures preserving invariants like napi which are
+	 * allocated only once
+	 */
+	for_each_queue(bp, i)
+		bnx2x_bz_fp(bp, i);
+
 	/* Set the receive queues buffer size */
 	bnx2x_set_rx_buf_size(bp);
 
+	for_each_queue(bp, i)
+		bnx2x_fp(bp, i, disable_tpa) =
+					((bp->flags & TPA_ENABLE_FLAG) == 0);
+
+#ifdef BCM_CNIC
+	/* We don't want TPA on FCoE L2 ring */
+	bnx2x_fcoe(bp, disable_tpa) = 1;
+#endif
+
 	if (bnx2x_alloc_mem(bp))
 		return -ENOMEM;
 
+	/* As long as bnx2x_alloc_mem() may possibly update
+	 * bp->num_queues, bnx2x_set_real_num_queues() should always
+	 * come after it.
+	 */
 	rc = bnx2x_set_real_num_queues(bp);
 	if (rc) {
 		BNX2X_ERR("Unable to set real_num_queues\n");
 		goto load_error0;
 	}
 
-	for_each_queue(bp, i)
-		bnx2x_fp(bp, i, disable_tpa) =
-					((bp->flags & TPA_ENABLE_FLAG) == 0);
-
-#ifdef BCM_CNIC
-	/* We don't want TPA on FCoE L2 ring */
-	bnx2x_fcoe(bp, disable_tpa) = 1;
-#endif
 	bnx2x_napi_enable(bp);
 
 	/* Send LOAD_REQUEST command to MCP
@@ -1976,12 +2085,11 @@ static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
 }
 
 /**
- * Update PBD in GSO case.
+ * bnx2x_set_pbd_gso - update PBD in GSO case.
  *
- * @param skb
- * @param tx_start_bd
- * @param pbd
- * @param xmit_type
+ * @skb:	packet skb
+ * @pbd:	parse BD
+ * @xmit_type:	xmit flags
  */
 static inline void bnx2x_set_pbd_gso(struct sk_buff *skb,
 				     struct eth_tx_parse_bd_e1x *pbd,
@@ -2008,42 +2116,50 @@ static inline void bnx2x_set_pbd_gso(struct sk_buff *skb,
 }
 
 /**
+ * bnx2x_set_pbd_csum_e2 - update PBD with checksum and return header length
  *
- * @param skb
- * @param tx_start_bd
- * @param pbd_e2
- * @param xmit_type
+ * @bp:			driver handle
+ * @skb:		packet skb
+ * @parsing_data:	data to be updated
+ * @xmit_type:		xmit flags
  *
- * @return header len
+ * 57712 related
  */
 static inline  u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
 	u32 *parsing_data, u32 xmit_type)
 {
-	*parsing_data |= ((tcp_hdrlen(skb)/4) <<
-		ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
-		ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
+	*parsing_data |=
+			((((u8 *)skb_transport_header(skb) - skb->data) >> 1) <<
+			ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
+			ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
 
-	*parsing_data |= ((((u8 *)tcp_hdr(skb) - skb->data) / 2) <<
-		ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
-		ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
+	if (xmit_type & XMIT_CSUM_TCP) {
+		*parsing_data |= ((tcp_hdrlen(skb) / 4) <<
+			ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
+			ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
 
-	return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
+		return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
+	} else
+		/* We support checksum offload for TCP and UDP only.
+		 * No need to pass the UDP header length - it's a constant.
+		 */
+		return skb_transport_header(skb) +
+				sizeof(struct udphdr) - skb->data;
 }
 
 /**
+ * bnx2x_set_pbd_csum - update PBD with checksum and return header length
  *
- * @param skb
- * @param tx_start_bd
- * @param pbd
- * @param xmit_type
- *
- * @return Header length
+ * @bp:		driver handle
+ * @skb:	packet skb
+ * @pbd:	parse BD to be updated
+ * @xmit_type:	xmit flags
  */
 static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb,
 	struct eth_tx_parse_bd_e1x *pbd,
 	u32 xmit_type)
 {
-	u8 hlen = (skb_network_header(skb) - skb->data) / 2;
+	u8 hlen = (skb_network_header(skb) - skb->data) >> 1;
 
 	/* for now NS flag is not used in Linux */
 	pbd->global_data =
@@ -2051,9 +2167,15 @@ static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb,
 			 ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT));
 
 	pbd->ip_hlen_w = (skb_transport_header(skb) -
-			skb_network_header(skb)) / 2;
+			skb_network_header(skb)) >> 1;
 
-	hlen += pbd->ip_hlen_w + tcp_hdrlen(skb) / 2;
+	hlen += pbd->ip_hlen_w;
+
+	/* We support checksum offload for TCP and UDP only */
+	if (xmit_type & XMIT_CSUM_TCP)
+		hlen += tcp_hdrlen(skb) / 2;
+	else
+		hlen += sizeof(struct udphdr) / 2;
 
 	pbd->total_hlen_w = cpu_to_le16(hlen);
 	hlen = hlen*2;
@@ -2379,6 +2501,232 @@ int bnx2x_change_mac_addr(struct net_device *dev, void *p)
 	return 0;
 }
 
+static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
+{
+	union host_hc_status_block *sb = &bnx2x_fp(bp, fp_index, status_blk);
+	struct bnx2x_fastpath *fp = &bp->fp[fp_index];
+
+	/* Common */
+#ifdef BCM_CNIC
+	if (IS_FCOE_IDX(fp_index)) {
+		memset(sb, 0, sizeof(union host_hc_status_block));
+		fp->status_blk_mapping = 0;
+
+	} else {
+#endif
+		/* status blocks */
+		if (CHIP_IS_E2(bp))
+			BNX2X_PCI_FREE(sb->e2_sb,
+				       bnx2x_fp(bp, fp_index,
+						status_blk_mapping),
+				       sizeof(struct host_hc_status_block_e2));
+		else
+			BNX2X_PCI_FREE(sb->e1x_sb,
+				       bnx2x_fp(bp, fp_index,
+						status_blk_mapping),
+				       sizeof(struct host_hc_status_block_e1x));
+#ifdef BCM_CNIC
+	}
+#endif
+	/* Rx */
+	if (!skip_rx_queue(bp, fp_index)) {
+		bnx2x_free_rx_bds(fp);
+
+		/* fastpath rx rings: rx_buf rx_desc rx_comp */
+		BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_buf_ring));
+		BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_desc_ring),
+			       bnx2x_fp(bp, fp_index, rx_desc_mapping),
+			       sizeof(struct eth_rx_bd) * NUM_RX_BD);
+
+		BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_comp_ring),
+			       bnx2x_fp(bp, fp_index, rx_comp_mapping),
+			       sizeof(struct eth_fast_path_rx_cqe) *
+			       NUM_RCQ_BD);
+
+		/* SGE ring */
+		BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_page_ring));
+		BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_sge_ring),
+			       bnx2x_fp(bp, fp_index, rx_sge_mapping),
+			       BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
+	}
+
+	/* Tx */
+	if (!skip_tx_queue(bp, fp_index)) {
+		/* fastpath tx rings: tx_buf tx_desc */
+		BNX2X_FREE(bnx2x_fp(bp, fp_index, tx_buf_ring));
+		BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, tx_desc_ring),
+			       bnx2x_fp(bp, fp_index, tx_desc_mapping),
+			       sizeof(union eth_tx_bd_types) * NUM_TX_BD);
+	}
+	/* end of fastpath */
+}
+
+void bnx2x_free_fp_mem(struct bnx2x *bp)
+{
+	int i;
+	for_each_queue(bp, i)
+		bnx2x_free_fp_mem_at(bp, i);
+}
+
+static inline void set_sb_shortcuts(struct bnx2x *bp, int index)
+{
+	union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk);
+	if (CHIP_IS_E2(bp)) {
+		bnx2x_fp(bp, index, sb_index_values) =
+			(__le16 *)status_blk.e2_sb->sb.index_values;
+		bnx2x_fp(bp, index, sb_running_index) =
+			(__le16 *)status_blk.e2_sb->sb.running_index;
+	} else {
+		bnx2x_fp(bp, index, sb_index_values) =
+			(__le16 *)status_blk.e1x_sb->sb.index_values;
+		bnx2x_fp(bp, index, sb_running_index) =
+			(__le16 *)status_blk.e1x_sb->sb.running_index;
+	}
+}
+
+static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
+{
+	union host_hc_status_block *sb;
+	struct bnx2x_fastpath *fp = &bp->fp[index];
+	int ring_size = 0;
+
+	/* if rx_ring_size specified - use it */
+	int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
+			   MAX_RX_AVAIL/bp->num_queues;
+
+	/* allocate at least number of buffers required by FW */
+	rx_ring_size = max_t(int, fp->disable_tpa ? MIN_RX_SIZE_NONTPA :
+						    MIN_RX_SIZE_TPA,
+				  rx_ring_size);
+
+	bnx2x_fp(bp, index, bp) = bp;
+	bnx2x_fp(bp, index, index) = index;
+
+	/* Common */
+	sb = &bnx2x_fp(bp, index, status_blk);
+#ifdef BCM_CNIC
+	if (!IS_FCOE_IDX(index)) {
+#endif
+		/* status blocks */
+		if (CHIP_IS_E2(bp))
+			BNX2X_PCI_ALLOC(sb->e2_sb,
+				&bnx2x_fp(bp, index, status_blk_mapping),
+				sizeof(struct host_hc_status_block_e2));
+		else
+			BNX2X_PCI_ALLOC(sb->e1x_sb,
+				&bnx2x_fp(bp, index, status_blk_mapping),
+			    sizeof(struct host_hc_status_block_e1x));
+#ifdef BCM_CNIC
+	}
+#endif
+	set_sb_shortcuts(bp, index);
+
+	/* Tx */
+	if (!skip_tx_queue(bp, index)) {
+		/* fastpath tx rings: tx_buf tx_desc */
+		BNX2X_ALLOC(bnx2x_fp(bp, index, tx_buf_ring),
+				sizeof(struct sw_tx_bd) * NUM_TX_BD);
+		BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, tx_desc_ring),
+				&bnx2x_fp(bp, index, tx_desc_mapping),
+				sizeof(union eth_tx_bd_types) * NUM_TX_BD);
+	}
+
+	/* Rx */
+	if (!skip_rx_queue(bp, index)) {
+		/* fastpath rx rings: rx_buf rx_desc rx_comp */
+		BNX2X_ALLOC(bnx2x_fp(bp, index, rx_buf_ring),
+				sizeof(struct sw_rx_bd) * NUM_RX_BD);
+		BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_desc_ring),
+				&bnx2x_fp(bp, index, rx_desc_mapping),
+				sizeof(struct eth_rx_bd) * NUM_RX_BD);
+
+		BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_comp_ring),
+				&bnx2x_fp(bp, index, rx_comp_mapping),
+				sizeof(struct eth_fast_path_rx_cqe) *
+				NUM_RCQ_BD);
+
+		/* SGE ring */
+		BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring),
+				sizeof(struct sw_rx_page) * NUM_RX_SGE);
+		BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_sge_ring),
+				&bnx2x_fp(bp, index, rx_sge_mapping),
+				BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
+		/* RX BD ring */
+		bnx2x_set_next_page_rx_bd(fp);
+
+		/* CQ ring */
+		bnx2x_set_next_page_rx_cq(fp);
+
+		/* BDs */
+		ring_size = bnx2x_alloc_rx_bds(fp, rx_ring_size);
+		if (ring_size < rx_ring_size)
+			goto alloc_mem_err;
+	}
+
+	return 0;
+
+/* handles low memory cases */
+alloc_mem_err:
+	BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n",
+						index, ring_size);
+	/* FW will drop all packets if queue is not big enough,
+	 * In these cases we disable the queue
+	 * Min size diferent for TPA and non-TPA queues
+	 */
+	if (ring_size < (fp->disable_tpa ?
+				MIN_RX_SIZE_TPA : MIN_RX_SIZE_NONTPA)) {
+			/* release memory allocated for this queue */
+			bnx2x_free_fp_mem_at(bp, index);
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+int bnx2x_alloc_fp_mem(struct bnx2x *bp)
+{
+	int i;
+
+	/**
+	 * 1. Allocate FP for leading - fatal if error
+	 * 2. {CNIC} Allocate FCoE FP - fatal if error
+	 * 3. Allocate RSS - fix number of queues if error
+	 */
+
+	/* leading */
+	if (bnx2x_alloc_fp_mem_at(bp, 0))
+		return -ENOMEM;
+#ifdef BCM_CNIC
+	/* FCoE */
+	if (bnx2x_alloc_fp_mem_at(bp, FCOE_IDX))
+		return -ENOMEM;
+#endif
+	/* RSS */
+	for_each_nondefault_eth_queue(bp, i)
+		if (bnx2x_alloc_fp_mem_at(bp, i))
+			break;
+
+	/* handle memory failures */
+	if (i != BNX2X_NUM_ETH_QUEUES(bp)) {
+		int delta = BNX2X_NUM_ETH_QUEUES(bp) - i;
+
+		WARN_ON(delta < 0);
+#ifdef BCM_CNIC
+		/**
+		 * move non eth FPs next to last eth FP
+		 * must be done in that order
+		 * FCOE_IDX < FWD_IDX < OOO_IDX
+		 */
+
+		/* move FCoE fp */
+		bnx2x_move_fp(bp, FCOE_IDX, FCOE_IDX - delta);
+#endif
+		bp->num_queues -= delta;
+		BNX2X_ERR("Adjusted num of queues from %d to %d\n",
+			  bp->num_queues + delta, bp->num_queues);
+	}
+
+	return 0;
+}
 
 static int bnx2x_setup_irqs(struct bnx2x *bp)
 {
@@ -2443,11 +2791,21 @@ alloc_err:
 
 }
 
+static int bnx2x_reload_if_running(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	if (unlikely(!netif_running(dev)))
+		return 0;
+
+	bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+	return bnx2x_nic_load(bp, LOAD_NORMAL);
+}
+
 /* called with rtnl_lock */
 int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	int rc = 0;
 
 	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
 		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
@@ -2464,12 +2822,55 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
 	 */
 	dev->mtu = new_mtu;
 
-	if (netif_running(dev)) {
-		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	return bnx2x_reload_if_running(dev);
+}
+
+u32 bnx2x_fix_features(struct net_device *dev, u32 features)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	/* TPA requires Rx CSUM offloading */
+	if (!(features & NETIF_F_RXCSUM) || bp->disable_tpa)
+		features &= ~NETIF_F_LRO;
+
+	return features;
+}
+
+int bnx2x_set_features(struct net_device *dev, u32 features)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	u32 flags = bp->flags;
+	bool bnx2x_reload = false;
+
+	if (features & NETIF_F_LRO)
+		flags |= TPA_ENABLE_FLAG;
+	else
+		flags &= ~TPA_ENABLE_FLAG;
+
+	if (features & NETIF_F_LOOPBACK) {
+		if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
+			bp->link_params.loopback_mode = LOOPBACK_BMAC;
+			bnx2x_reload = true;
+		}
+	} else {
+		if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
+			bp->link_params.loopback_mode = LOOPBACK_NONE;
+			bnx2x_reload = true;
+		}
 	}
 
-	return rc;
+	if (flags ^ bp->flags) {
+		bp->flags = flags;
+		bnx2x_reload = true;
+	}
+
+	if (bnx2x_reload) {
+		if (bp->recovery_state == BNX2X_RECOVERY_DONE)
+			return bnx2x_reload_if_running(dev);
+		/* else: bnx2x_nic_load() will be called at end of recovery */
+	}
+
+	return 0;
 }
 
 void bnx2x_tx_timeout(struct net_device *dev)
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index ef37b98d614..fab161e8030 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -1,6 +1,6 @@
 /* bnx2x_cmn.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,260 +25,277 @@
 
 extern int num_queues;
 
+/************************ Macros ********************************/
+#define BNX2X_PCI_FREE(x, y, size) \
+	do { \
+		if (x) { \
+			dma_free_coherent(&bp->pdev->dev, size, (void *)x, y); \
+			x = NULL; \
+			y = 0; \
+		} \
+	} while (0)
+
+#define BNX2X_FREE(x) \
+	do { \
+		if (x) { \
+			kfree((void *)x); \
+			x = NULL; \
+		} \
+	} while (0)
+
+#define BNX2X_PCI_ALLOC(x, y, size) \
+	do { \
+		x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
+		if (x == NULL) \
+			goto alloc_mem_err; \
+		memset((void *)x, 0, size); \
+	} while (0)
+
+#define BNX2X_ALLOC(x, size) \
+	do { \
+		x = kzalloc(size, GFP_KERNEL); \
+		if (x == NULL) \
+			goto alloc_mem_err; \
+	} while (0)
+
 /*********************** Interfaces ****************************
  *  Functions that need to be implemented by each driver version
  */
 
 /**
- * Initialize link parameters structure variables.
- *
- * @param bp
- * @param load_mode
+ * bnx2x_initial_phy_init - initialize link parameters structure variables.
  *
- * @return u8
+ * @bp:		driver handle
+ * @load_mode:	current mode
  */
 u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode);
 
 /**
- * Configure hw according to link parameters structure.
+ * bnx2x_link_set - configure hw according to link parameters structure.
  *
- * @param bp
+ * @bp:		driver handle
  */
 void bnx2x_link_set(struct bnx2x *bp);
 
 /**
- * Query link status
+ * bnx2x_link_test - query link status.
  *
- * @param bp
- * @param is_serdes
+ * @bp:		driver handle
+ * @is_serdes:	bool
  *
- * @return 0 - link is UP
+ * Returns 0 if link is UP.
  */
 u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes);
 
 /**
- * Handles link status change
+ * bnx2x__link_status_update - handles link status change.
  *
- * @param bp
+ * @bp:		driver handle
  */
 void bnx2x__link_status_update(struct bnx2x *bp);
 
 /**
- * Report link status to upper layer
- *
- * @param bp
+ * bnx2x_link_report - report link status to upper layer.
  *
- * @return int
+ * @bp:		driver handle
  */
 void bnx2x_link_report(struct bnx2x *bp);
 
+/* None-atomic version of bnx2x_link_report() */
+void __bnx2x_link_report(struct bnx2x *bp);
+
 /**
- * calculates MF speed according to current linespeed and MF
- * configuration
+ * bnx2x_get_mf_speed - calculate MF speed.
  *
- * @param bp
+ * @bp:		driver handle
  *
- * @return u16
+ * Takes into account current linespeed and MF configuration.
  */
 u16 bnx2x_get_mf_speed(struct bnx2x *bp);
 
 /**
- * MSI-X slowpath interrupt handler
- *
- * @param irq
- * @param dev_instance
+ * bnx2x_msix_sp_int - MSI-X slowpath interrupt handler
  *
- * @return irqreturn_t
+ * @irq:		irq number
+ * @dev_instance:	private instance
  */
 irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance);
 
 /**
- * non MSI-X interrupt handler
+ * bnx2x_interrupt - non MSI-X interrupt handler
  *
- * @param irq
- * @param dev_instance
- *
- * @return irqreturn_t
+ * @irq:		irq number
+ * @dev_instance:	private instance
  */
 irqreturn_t bnx2x_interrupt(int irq, void *dev_instance);
 #ifdef BCM_CNIC
 
 /**
- * Send command to cnic driver
+ * bnx2x_cnic_notify - send command to cnic driver
  *
- * @param bp
- * @param cmd
+ * @bp:		driver handle
+ * @cmd:	command
  */
 int bnx2x_cnic_notify(struct bnx2x *bp, int cmd);
 
 /**
- * Provides cnic information for proper interrupt handling
+ * bnx2x_setup_cnic_irq_info - provides cnic with IRQ information
  *
- * @param bp
+ * @bp:		driver handle
  */
 void bnx2x_setup_cnic_irq_info(struct bnx2x *bp);
 #endif
 
 /**
- * Enable HW interrupts.
+ * bnx2x_int_enable - enable HW interrupts.
  *
- * @param bp
+ * @bp:		driver handle
  */
 void bnx2x_int_enable(struct bnx2x *bp);
 
 /**
- * Disable interrupts. This function ensures that there are no
- * ISRs or SP DPCs (sp_task) are running after it returns.
+ * bnx2x_int_disable_sync - disable interrupts.
  *
- * @param bp
- * @param disable_hw if true, disable HW interrupts.
+ * @bp:		driver handle
+ * @disable_hw:	true, disable HW interrupts.
+ *
+ * This function ensures that there are no
+ * ISRs or SP DPCs (sp_task) are running after it returns.
  */
 void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw);
 
 /**
- * Loads device firmware
+ * bnx2x_init_firmware - loads device firmware
  *
- * @param bp
- *
- * @return int
+ * @bp:		driver handle
  */
 int bnx2x_init_firmware(struct bnx2x *bp);
 
 /**
- * Init HW blocks according to current initialization stage:
- * COMMON, PORT or FUNCTION.
- *
- * @param bp
- * @param load_code: COMMON, PORT or FUNCTION
+ * bnx2x_init_hw - init HW blocks according to current initialization stage.
  *
- * @return int
+ * @bp:		driver handle
+ * @load_code:	COMMON, PORT or FUNCTION
  */
 int bnx2x_init_hw(struct bnx2x *bp, u32 load_code);
 
 /**
- * Init driver internals:
+ * bnx2x_nic_init - init driver internals.
+ *
+ * @bp:		driver handle
+ * @load_code:	COMMON, PORT or FUNCTION
+ *
+ * Initializes:
  *  - rings
  *  - status blocks
  *  - etc.
- *
- * @param bp
- * @param load_code COMMON, PORT or FUNCTION
  */
 void bnx2x_nic_init(struct bnx2x *bp, u32 load_code);
 
 /**
- * Allocate driver's memory.
- *
- * @param bp
+ * bnx2x_alloc_mem - allocate driver's memory.
  *
- * @return int
+ * @bp:		driver handle
  */
 int bnx2x_alloc_mem(struct bnx2x *bp);
 
 /**
- * Release driver's memory.
+ * bnx2x_free_mem - release driver's memory.
  *
- * @param bp
+ * @bp:		driver handle
  */
 void bnx2x_free_mem(struct bnx2x *bp);
 
 /**
- * Setup eth Client.
+ * bnx2x_setup_client - setup eth client.
  *
- * @param bp
- * @param fp
- * @param is_leading
- *
- * @return int
+ * @bp:		driver handle
+ * @fp:		pointer to fastpath structure
+ * @is_leading:	boolean
  */
 int bnx2x_setup_client(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		       int is_leading);
 
 /**
- * Set number of queues according to mode
- *
- * @param bp
+ * bnx2x_set_num_queues - set number of queues according to mode.
  *
+ * @bp:		driver handle
  */
 void bnx2x_set_num_queues(struct bnx2x *bp);
 
 /**
- * Cleanup chip internals:
+ * bnx2x_chip_cleanup - cleanup chip internals.
+ *
+ * @bp:			driver handle
+ * @unload_mode:	COMMON, PORT, FUNCTION
+ *
  * - Cleanup MAC configuration.
- * - Close clients.
+ * - Closes clients.
  * - etc.
- *
- * @param bp
- * @param unload_mode
  */
 void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode);
 
 /**
- * Acquire HW lock.
+ * bnx2x_acquire_hw_lock - acquire HW lock.
  *
- * @param bp
- * @param resource Resource bit which was locked
- *
- * @return int
+ * @bp:		driver handle
+ * @resource:	resource bit which was locked
  */
 int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource);
 
 /**
- * Release HW lock.
- *
- * @param bp driver handle
- * @param resource Resource bit which was locked
+ * bnx2x_release_hw_lock - release HW lock.
  *
- * @return int
+ * @bp:		driver handle
+ * @resource:	resource bit which was locked
  */
 int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource);
 
 /**
- * Configure eth MAC address in the HW according to the value in
- * netdev->dev_addr.
+ * bnx2x_set_eth_mac - configure eth MAC address in the HW
  *
- * @param bp driver handle
- * @param set
+ * @bp:		driver handle
+ * @set:	set or clear
+ *
+ * Configures according to the value in netdev->dev_addr.
  */
 void bnx2x_set_eth_mac(struct bnx2x *bp, int set);
 
 #ifdef BCM_CNIC
 /**
- * Set/Clear FIP MAC(s) at the next enties in the CAM after the ETH
- * MAC(s). This function will wait until the ramdord completion
- * returns.
+ * bnx2x_set_fip_eth_mac_addr - Set/Clear FIP MAC(s)
  *
- * @param bp driver handle
- * @param set set or clear the CAM entry
+ * @bp:		driver handle
+ * @set:	set or clear the CAM entry
  *
- * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ * Used next enties in the CAM after the ETH MAC(s).
+ * This function will wait until the ramdord completion returns.
+ * Return 0 if cussess, -ENODEV if ramrod doesn't return.
  */
 int bnx2x_set_fip_eth_mac_addr(struct bnx2x *bp, int set);
 
 /**
- * Set/Clear ALL_ENODE mcast MAC.
- *
- * @param bp
- * @param set
+ * bnx2x_set_all_enode_macs - Set/Clear ALL_ENODE mcast MAC.
  *
- * @return int
+ * @bp:		driver handle
+ * @set:	set or clear
  */
 int bnx2x_set_all_enode_macs(struct bnx2x *bp, int set);
 #endif
 
 /**
- * Set MAC filtering configurations.
+ * bnx2x_set_rx_mode - set MAC filtering configurations.
  *
- * @remarks called with netif_tx_lock from dev_mcast.c
+ * @dev:	netdevice
  *
- * @param dev net_device
+ * called with netif_tx_lock from dev_mcast.c
  */
 void bnx2x_set_rx_mode(struct net_device *dev);
 
 /**
- * Configure MAC filtering rules in a FW.
+ * bnx2x_set_storm_rx_mode - configure MAC filtering rules in a FW.
  *
- * @param bp driver handle
+ * @bp:		driver handle
  */
 void bnx2x_set_storm_rx_mode(struct bnx2x *bp);
 
@@ -290,63 +307,59 @@ bool bnx2x_reset_is_done(struct bnx2x *bp);
 void bnx2x_disable_close_the_gate(struct bnx2x *bp);
 
 /**
- * Perform statistics handling according to event
+ * bnx2x_stats_handle - perform statistics handling according to event.
  *
- * @param bp driver handle
- * @param event bnx2x_stats_event
+ * @bp:		driver handle
+ * @event:	bnx2x_stats_event
  */
 void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event);
 
 /**
- * Handle ramrods completion
+ * bnx2x_sp_event - handle ramrods completion.
  *
- * @param fp fastpath handle for the event
- * @param rr_cqe eth_rx_cqe
+ * @fp:		fastpath handle for the event
+ * @rr_cqe:	eth_rx_cqe
  */
 void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe);
 
 /**
- * Init/halt function before/after sending
- * CLIENT_SETUP/CFC_DEL for the first/last client.
+ * bnx2x_func_start - init function
  *
- * @param bp
+ * @bp:		driver handle
  *
- * @return int
+ * Must be called before sending CLIENT_SETUP for the first client.
  */
 int bnx2x_func_start(struct bnx2x *bp);
 
 /**
- * Prepare ILT configurations according to current driver
- * parameters.
+ * bnx2x_ilt_set_info - prepare ILT configurations.
  *
- * @param bp
+ * @bp:		driver handle
  */
 void bnx2x_ilt_set_info(struct bnx2x *bp);
 
 /**
- * Inintialize dcbx protocol
+ * bnx2x_dcbx_init - initialize dcbx protocol.
  *
- * @param bp
+ * @bp:		driver handle
  */
 void bnx2x_dcbx_init(struct bnx2x *bp);
 
 /**
- * Set power state to the requested value. Currently only D0 and
- * D3hot are supported.
+ * bnx2x_set_power_state - set power state to the requested value.
  *
- * @param bp
- * @param state D0 or D3hot
+ * @bp:		driver handle
+ * @state:	required state D0 or D3hot
  *
- * @return int
+ * Currently only D0 and D3hot are supported.
  */
 int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state);
 
 /**
- * Updates MAX part of MF configuration in HW
- * (if required)
+ * bnx2x_update_max_mf_config - update MAX part of MF configuration in HW.
  *
- * @param bp
- * @param value
+ * @bp:		driver handle
+ * @value:	new value
  */
 void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value);
 
@@ -377,83 +390,72 @@ int bnx2x_resume(struct pci_dev *pdev);
 /* Release IRQ vectors */
 void bnx2x_free_irq(struct bnx2x *bp);
 
+void bnx2x_free_fp_mem(struct bnx2x *bp);
+int bnx2x_alloc_fp_mem(struct bnx2x *bp);
+
 void bnx2x_init_rx_rings(struct bnx2x *bp);
 void bnx2x_free_skbs(struct bnx2x *bp);
 void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw);
 void bnx2x_netif_start(struct bnx2x *bp);
 
 /**
- * Fill msix_table, request vectors, update num_queues according
- * to number of available vectors
+ * bnx2x_enable_msix - set msix configuration.
  *
- * @param bp
+ * @bp:		driver handle
  *
- * @return int
+ * fills msix_table, requests vectors, updates num_queues
+ * according to number of available vectors.
  */
 int bnx2x_enable_msix(struct bnx2x *bp);
 
 /**
- * Request msi mode from OS, updated internals accordingly
- *
- * @param bp
+ * bnx2x_enable_msi - request msi mode from OS, updated internals accordingly
  *
- * @return int
+ * @bp:		driver handle
  */
 int bnx2x_enable_msi(struct bnx2x *bp);
 
 /**
- * NAPI callback
+ * bnx2x_poll - NAPI callback
  *
- * @param napi
- * @param budget
+ * @napi:	napi structure
+ * @budget:
  *
- * @return int
  */
 int bnx2x_poll(struct napi_struct *napi, int budget);
 
 /**
- * Allocate/release memories outsize main driver structure
+ * bnx2x_alloc_mem_bp - allocate memories outsize main driver structure
  *
- * @param bp
- *
- * @return int
+ * @bp:		driver handle
  */
 int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp);
-void bnx2x_free_mem_bp(struct bnx2x *bp);
 
 /**
- * Change mtu netdev callback
+ * bnx2x_free_mem_bp - release memories outsize main driver structure
  *
- * @param dev
- * @param new_mtu
- *
- * @return int
+ * @bp:		driver handle
  */
-int bnx2x_change_mtu(struct net_device *dev, int new_mtu);
+void bnx2x_free_mem_bp(struct bnx2x *bp);
 
 /**
- * tx timeout netdev callback
+ * bnx2x_change_mtu - change mtu netdev callback
  *
- * @param dev
- * @param new_mtu
+ * @dev:	net device
+ * @new_mtu:	requested mtu
  *
- * @return int
  */
-void bnx2x_tx_timeout(struct net_device *dev);
+int bnx2x_change_mtu(struct net_device *dev, int new_mtu);
+
+u32 bnx2x_fix_features(struct net_device *dev, u32 features);
+int bnx2x_set_features(struct net_device *dev, u32 features);
 
-#ifdef BCM_VLAN
 /**
- * vlan rx register netdev callback
+ * bnx2x_tx_timeout - tx timeout netdev callback
  *
- * @param dev
- * @param new_mtu
- *
- * @return int
+ * @dev:	net device
  */
-void bnx2x_vlan_rx_register(struct net_device *dev,
-				   struct vlan_group *vlgrp);
-
-#endif
+void bnx2x_tx_timeout(struct net_device *dev);
 
 static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
 {
@@ -705,7 +707,7 @@ static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
 /**
  * disables tx from stack point of view
  *
- * @param bp
+ * @bp:		driver handle
  */
 static inline void bnx2x_tx_disable(struct bnx2x *bp)
 {
@@ -880,6 +882,9 @@ static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp,
 {
 	int i;
 
+	if (fp->disable_tpa)
+		return;
+
 	for (i = 0; i < last; i++)
 		bnx2x_free_rx_sge(bp, fp, i);
 }
@@ -908,36 +913,39 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 	}
 }
 
-
-static inline void bnx2x_init_tx_rings(struct bnx2x *bp)
+static inline void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp)
 {
-	int i, j;
+	int i;
 
-	for_each_tx_queue(bp, j) {
-		struct bnx2x_fastpath *fp = &bp->fp[j];
+	for (i = 1; i <= NUM_TX_RINGS; i++) {
+		struct eth_tx_next_bd *tx_next_bd =
+			&fp->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd;
 
-		for (i = 1; i <= NUM_TX_RINGS; i++) {
-			struct eth_tx_next_bd *tx_next_bd =
-				&fp->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd;
+		tx_next_bd->addr_hi =
+			cpu_to_le32(U64_HI(fp->tx_desc_mapping +
+				    BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
+		tx_next_bd->addr_lo =
+			cpu_to_le32(U64_LO(fp->tx_desc_mapping +
+				    BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
+	}
 
-			tx_next_bd->addr_hi =
-				cpu_to_le32(U64_HI(fp->tx_desc_mapping +
-					    BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
-			tx_next_bd->addr_lo =
-				cpu_to_le32(U64_LO(fp->tx_desc_mapping +
-					    BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
-		}
+	SET_FLAG(fp->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1);
+	fp->tx_db.data.zero_fill1 = 0;
+	fp->tx_db.data.prod = 0;
 
-		SET_FLAG(fp->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1);
-		fp->tx_db.data.zero_fill1 = 0;
-		fp->tx_db.data.prod = 0;
+	fp->tx_pkt_prod = 0;
+	fp->tx_pkt_cons = 0;
+	fp->tx_bd_prod = 0;
+	fp->tx_bd_cons = 0;
+	fp->tx_pkt = 0;
+}
 
-		fp->tx_pkt_prod = 0;
-		fp->tx_pkt_cons = 0;
-		fp->tx_bd_prod = 0;
-		fp->tx_bd_cons = 0;
-		fp->tx_pkt = 0;
-	}
+static inline void bnx2x_init_tx_rings(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_tx_queue(bp, i)
+		bnx2x_init_tx_ring_one(&bp->fp[i]);
 }
 
 static inline void bnx2x_set_next_page_rx_bd(struct bnx2x_fastpath *fp)
@@ -992,6 +1000,44 @@ static inline void bnx2x_set_next_page_rx_cq(struct bnx2x_fastpath *fp)
 	}
 }
 
+/* Returns the number of actually allocated BDs */
+static inline int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp,
+				      int rx_ring_size)
+{
+	struct bnx2x *bp = fp->bp;
+	u16 ring_prod, cqe_ring_prod;
+	int i;
+
+	fp->rx_comp_cons = 0;
+	cqe_ring_prod = ring_prod = 0;
+
+	/* This routine is called only during fo init so
+	 * fp->eth_q_stats.rx_skb_alloc_failed = 0
+	 */
+	for (i = 0; i < rx_ring_size; i++) {
+		if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
+			fp->eth_q_stats.rx_skb_alloc_failed++;
+			continue;
+		}
+		ring_prod = NEXT_RX_IDX(ring_prod);
+		cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod);
+		WARN_ON(ring_prod <= (i - fp->eth_q_stats.rx_skb_alloc_failed));
+	}
+
+	if (fp->eth_q_stats.rx_skb_alloc_failed)
+		BNX2X_ERR("was only able to allocate "
+			  "%d rx skbs on queue[%d]\n",
+			  (i - fp->eth_q_stats.rx_skb_alloc_failed), fp->index);
+
+	fp->rx_bd_prod = ring_prod;
+	/* Limit the CQE producer by the CQE ring size */
+	fp->rx_comp_prod = min_t(u16, NUM_RCQ_RINGS*RCQ_DESC_CNT,
+			       cqe_ring_prod);
+	fp->rx_pkt = fp->rx_calls = 0;
+
+	return i - fp->eth_q_stats.rx_skb_alloc_failed;
+}
+
 #ifdef BCM_CNIC
 static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
 {
@@ -1041,12 +1087,23 @@ static inline void storm_memset_cmng(struct bnx2x *bp,
 				struct cmng_struct_per_port *cmng,
 				u8 port)
 {
-	size_t size = sizeof(struct cmng_struct_per_port);
+	size_t size =
+		sizeof(struct rate_shaping_vars_per_port) +
+		sizeof(struct fairness_vars_per_port) +
+		sizeof(struct safc_struct_per_port) +
+		sizeof(struct pfc_struct_per_port);
 
 	u32 addr = BAR_XSTRORM_INTMEM +
 			XSTORM_CMNG_PER_PORT_VARS_OFFSET(port);
 
 	__storm_memset_struct(bp, addr, size, (u32 *)cmng);
+
+	addr += size + 4 /* SKIP DCB+LLFC */;
+	size = sizeof(struct cmng_struct_per_port) -
+		size /* written */ - 4 /*skipped*/;
+
+	__storm_memset_struct(bp, addr, size,
+			      (u32 *)(cmng->traffic_type_to_priority_cos));
 }
 
 /* HW Lock for shared dual port PHYs */
@@ -1054,12 +1111,11 @@ void bnx2x_acquire_phy_lock(struct bnx2x *bp);
 void bnx2x_release_phy_lock(struct bnx2x *bp);
 
 /**
- * Extracts MAX BW part from MF configuration.
+ * bnx2x_extract_max_cfg - extract MAX BW part from MF configuration.
  *
- * @param bp
- * @param mf_cfg
+ * @bp:		driver handle
+ * @mf_cfg:	MF configuration
  *
- * @return u16
  */
 static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg)
 {
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c
index 9a24d79c71d..410a49e571a 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/bnx2x/bnx2x_dcb.c
@@ -1,6 +1,6 @@
 /* bnx2x_dcb.c: Broadcom Everest network driver.
  *
- * Copyright 2009-2010 Broadcom Corporation
+ * Copyright 2009-2011 Broadcom Corporation
  *
  * Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -485,6 +485,36 @@ static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp)
 	}
 }
 
+#ifdef BCM_DCBNL
+static int bnx2x_dcbx_read_shmem_remote_mib(struct bnx2x *bp)
+{
+	struct lldp_remote_mib remote_mib = {0};
+	u32 dcbx_remote_mib_offset = SHMEM2_RD(bp, dcbx_remote_mib_offset);
+	int rc;
+
+	DP(NETIF_MSG_LINK, "dcbx_remote_mib_offset 0x%x\n",
+	   dcbx_remote_mib_offset);
+
+	if (SHMEM_DCBX_REMOTE_MIB_NONE == dcbx_remote_mib_offset) {
+		BNX2X_ERR("FW doesn't support dcbx_remote_mib_offset\n");
+		return -EINVAL;
+	}
+
+	rc = bnx2x_dcbx_read_mib(bp, (u32 *)&remote_mib, dcbx_remote_mib_offset,
+				 DCBX_READ_REMOTE_MIB);
+
+	if (rc) {
+		BNX2X_ERR("Faild to read remote mib from FW\n");
+		return rc;
+	}
+
+	/* save features and flags */
+	bp->dcbx_remote_feat = remote_mib.features;
+	bp->dcbx_remote_flags = remote_mib.flags;
+	return 0;
+}
+#endif
+
 static int bnx2x_dcbx_read_shmem_neg_results(struct bnx2x *bp)
 {
 	struct lldp_local_mib local_mib = {0};
@@ -571,6 +601,28 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
 {
 	switch (state) {
 	case BNX2X_DCBX_STATE_NEG_RECEIVED:
+#ifdef BCM_CNIC
+		if (bp->state != BNX2X_STATE_OPENING_WAIT4_LOAD) {
+			struct cnic_ops *c_ops;
+			struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+			bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
+			cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
+			cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI;
+
+			rcu_read_lock();
+			c_ops = rcu_dereference(bp->cnic_ops);
+			if (c_ops) {
+				bnx2x_cnic_notify(bp, CNIC_CTL_STOP_ISCSI_CMD);
+				rcu_read_unlock();
+				return;
+			}
+			rcu_read_unlock();
+		}
+
+		/* fall through if no CNIC initialized  */
+	case BNX2X_DCBX_STATE_ISCSI_STOPPED:
+#endif
+
 		{
 			DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_NEG_RECEIVED\n");
 #ifdef BCM_DCBNL
@@ -579,6 +631,10 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
 			 * negotiation results
 			 */
 			bnx2x_dcbnl_update_applist(bp, true);
+
+			/* Read rmeote mib if dcbx is in the FW */
+			if (bnx2x_dcbx_read_shmem_remote_mib(bp))
+				return;
 #endif
 			/* Read neg results if dcbx is in the FW */
 			if (bnx2x_dcbx_read_shmem_neg_results(bp))
@@ -1057,12 +1113,6 @@ static void bnx2x_dcbx_get_num_pg_traf_type(struct bnx2x *bp,
 	}
 }
 
-
-/*******************************************************************************
- * Description: single priority group
- *
- * Return:
- ******************************************************************************/
 static void bnx2x_dcbx_ets_disabled_entry_data(struct bnx2x *bp,
 					       struct cos_help_data *cos_data,
 					       u32 pri_join_mask)
@@ -1075,11 +1125,6 @@ static void bnx2x_dcbx_ets_disabled_entry_data(struct bnx2x *bp,
 	cos_data->num_of_cos = 1;
 }
 
-/*******************************************************************************
- * Description: updating the cos bw
- *
- * Return:
- ******************************************************************************/
 static inline void bnx2x_dcbx_add_to_cos_bw(struct bnx2x *bp,
 					    struct cos_entry_help_data *data,
 					    u8 pg_bw)
@@ -1090,11 +1135,6 @@ static inline void bnx2x_dcbx_add_to_cos_bw(struct bnx2x *bp,
 		data->cos_bw += pg_bw;
 }
 
-/*******************************************************************************
- * Description: single priority group
- *
- * Return:
- ******************************************************************************/
 static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp,
 			struct cos_help_data *cos_data,
 			u32 *pg_pri_orginal_spread,
@@ -1347,11 +1387,6 @@ static void bnx2x_dcbx_two_pg_to_cos_params(
 	}
 }
 
-/*******************************************************************************
- * Description: Still
- *
- * Return:
- ******************************************************************************/
 static void bnx2x_dcbx_three_pg_to_cos_params(
 			      struct bnx2x		*bp,
 			      struct pg_help_data	*pg_help_data,
@@ -1539,11 +1574,6 @@ static void bnx2x_dcbx_get_ets_pri_pg_tbl(struct bnx2x *bp,
 	}
 }
 
-/*******************************************************************************
- * Description: Fill pfc_config struct that will be sent in DCBX start ramrod
- *
- * Return:
- ******************************************************************************/
 static void bnx2x_pfc_fw_struct_e2(struct bnx2x *bp)
 {
 	struct flow_control_configuration   *pfc_fw_cfg = NULL;
@@ -2035,7 +2065,6 @@ static u8 bnx2x_dcbnl_set_dcbx(struct net_device *netdev, u8 state)
 	return 0;
 }
 
-
 static u8 bnx2x_dcbnl_get_featcfg(struct net_device *netdev, int featid,
 				  u8 *flags)
 {
@@ -2115,31 +2144,100 @@ static u8 bnx2x_dcbnl_set_featcfg(struct net_device *netdev, int featid,
 	return rval;
 }
 
+static int bnx2x_peer_appinfo(struct net_device *netdev,
+			      struct dcb_peer_app_info *info, u16* app_count)
+{
+	int i;
+	struct bnx2x *bp = netdev_priv(netdev);
+
+	DP(NETIF_MSG_LINK, "APP-INFO\n");
+
+	info->willing = (bp->dcbx_remote_flags & DCBX_APP_REM_WILLING) ?: 0;
+	info->error = (bp->dcbx_remote_flags & DCBX_APP_RX_ERROR) ?: 0;
+	*app_count = 0;
+
+	for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++)
+		if (bp->dcbx_remote_feat.app.app_pri_tbl[i].appBitfield &
+		    DCBX_APP_ENTRY_VALID)
+			(*app_count)++;
+	return 0;
+}
+
+static int bnx2x_peer_apptable(struct net_device *netdev,
+			       struct dcb_app *table)
+{
+	int i, j;
+	struct bnx2x *bp = netdev_priv(netdev);
+
+	DP(NETIF_MSG_LINK, "APP-TABLE\n");
+
+	for (i = 0, j = 0; i < DCBX_MAX_APP_PROTOCOL; i++) {
+		struct dcbx_app_priority_entry *ent =
+			&bp->dcbx_remote_feat.app.app_pri_tbl[i];
+
+		if (ent->appBitfield & DCBX_APP_ENTRY_VALID) {
+			table[j].selector = bnx2x_dcbx_dcbnl_app_idtype(ent);
+			table[j].priority = bnx2x_dcbx_dcbnl_app_up(ent);
+			table[j++].protocol = ent->app_id;
+		}
+	}
+	return 0;
+}
+
+static int bnx2x_cee_peer_getpg(struct net_device *netdev, struct cee_pg *pg)
+{
+	int i;
+	struct bnx2x *bp = netdev_priv(netdev);
+
+	pg->willing = (bp->dcbx_remote_flags & DCBX_ETS_REM_WILLING) ?: 0;
+
+	for (i = 0; i < CEE_DCBX_MAX_PGS; i++) {
+		pg->pg_bw[i] =
+			DCBX_PG_BW_GET(bp->dcbx_remote_feat.ets.pg_bw_tbl, i);
+		pg->prio_pg[i] =
+			DCBX_PRI_PG_GET(bp->dcbx_remote_feat.ets.pri_pg_tbl, i);
+	}
+	return 0;
+}
+
+static int bnx2x_cee_peer_getpfc(struct net_device *netdev,
+				 struct cee_pfc *pfc)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	pfc->tcs_supported = bp->dcbx_remote_feat.pfc.pfc_caps;
+	pfc->pfc_en = bp->dcbx_remote_feat.pfc.pri_en_bitmap;
+	return 0;
+}
+
 const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops = {
-	.getstate       = bnx2x_dcbnl_get_state,
-	.setstate       = bnx2x_dcbnl_set_state,
-	.getpermhwaddr  = bnx2x_dcbnl_get_perm_hw_addr,
-	.setpgtccfgtx   = bnx2x_dcbnl_set_pg_tccfg_tx,
-	.setpgbwgcfgtx  = bnx2x_dcbnl_set_pg_bwgcfg_tx,
-	.setpgtccfgrx   = bnx2x_dcbnl_set_pg_tccfg_rx,
-	.setpgbwgcfgrx  = bnx2x_dcbnl_set_pg_bwgcfg_rx,
-	.getpgtccfgtx   = bnx2x_dcbnl_get_pg_tccfg_tx,
-	.getpgbwgcfgtx  = bnx2x_dcbnl_get_pg_bwgcfg_tx,
-	.getpgtccfgrx   = bnx2x_dcbnl_get_pg_tccfg_rx,
-	.getpgbwgcfgrx  = bnx2x_dcbnl_get_pg_bwgcfg_rx,
-	.setpfccfg      = bnx2x_dcbnl_set_pfc_cfg,
-	.getpfccfg      = bnx2x_dcbnl_get_pfc_cfg,
-	.setall         = bnx2x_dcbnl_set_all,
-	.getcap         = bnx2x_dcbnl_get_cap,
-	.getnumtcs      = bnx2x_dcbnl_get_numtcs,
-	.setnumtcs      = bnx2x_dcbnl_set_numtcs,
-	.getpfcstate    = bnx2x_dcbnl_get_pfc_state,
-	.setpfcstate    = bnx2x_dcbnl_set_pfc_state,
-	.setapp         = bnx2x_dcbnl_set_app_up,
-	.getdcbx        = bnx2x_dcbnl_get_dcbx,
-	.setdcbx        = bnx2x_dcbnl_set_dcbx,
-	.getfeatcfg     = bnx2x_dcbnl_get_featcfg,
-	.setfeatcfg     = bnx2x_dcbnl_set_featcfg,
+	.getstate		= bnx2x_dcbnl_get_state,
+	.setstate		= bnx2x_dcbnl_set_state,
+	.getpermhwaddr		= bnx2x_dcbnl_get_perm_hw_addr,
+	.setpgtccfgtx		= bnx2x_dcbnl_set_pg_tccfg_tx,
+	.setpgbwgcfgtx		= bnx2x_dcbnl_set_pg_bwgcfg_tx,
+	.setpgtccfgrx		= bnx2x_dcbnl_set_pg_tccfg_rx,
+	.setpgbwgcfgrx		= bnx2x_dcbnl_set_pg_bwgcfg_rx,
+	.getpgtccfgtx		= bnx2x_dcbnl_get_pg_tccfg_tx,
+	.getpgbwgcfgtx		= bnx2x_dcbnl_get_pg_bwgcfg_tx,
+	.getpgtccfgrx		= bnx2x_dcbnl_get_pg_tccfg_rx,
+	.getpgbwgcfgrx		= bnx2x_dcbnl_get_pg_bwgcfg_rx,
+	.setpfccfg		= bnx2x_dcbnl_set_pfc_cfg,
+	.getpfccfg		= bnx2x_dcbnl_get_pfc_cfg,
+	.setall			= bnx2x_dcbnl_set_all,
+	.getcap			= bnx2x_dcbnl_get_cap,
+	.getnumtcs		= bnx2x_dcbnl_get_numtcs,
+	.setnumtcs		= bnx2x_dcbnl_set_numtcs,
+	.getpfcstate		= bnx2x_dcbnl_get_pfc_state,
+	.setpfcstate		= bnx2x_dcbnl_set_pfc_state,
+	.setapp			= bnx2x_dcbnl_set_app_up,
+	.getdcbx		= bnx2x_dcbnl_get_dcbx,
+	.setdcbx		= bnx2x_dcbnl_set_dcbx,
+	.getfeatcfg		= bnx2x_dcbnl_get_featcfg,
+	.setfeatcfg		= bnx2x_dcbnl_set_featcfg,
+	.peer_getappinfo	= bnx2x_peer_appinfo,
+	.peer_getapptable	= bnx2x_peer_apptable,
+	.cee_peer_getpg		= bnx2x_cee_peer_getpg,
+	.cee_peer_getpfc	= bnx2x_cee_peer_getpfc,
 };
 
 #endif /* BCM_DCBNL */
diff --git a/drivers/net/bnx2x/bnx2x_dcb.h b/drivers/net/bnx2x/bnx2x_dcb.h
index 71b8eda43bd..bed369d67e0 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.h
+++ b/drivers/net/bnx2x/bnx2x_dcb.h
@@ -1,6 +1,6 @@
 /* bnx2x_dcb.h: Broadcom Everest network driver.
  *
- * Copyright 2009-2010 Broadcom Corporation
+ * Copyright 2009-2011 Broadcom Corporation
  *
  * Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -61,9 +61,6 @@ struct bnx2x_dcbx_port_params {
 #define BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE		1
 #define BNX2X_DCBX_OVERWRITE_SETTINGS_INVALID	(BNX2X_DCBX_CONFIG_INV_VALUE)
 
-/*******************************************************************************
- * LLDP protocol configuration parameters.
- ******************************************************************************/
 struct bnx2x_config_lldp_params {
 	u32 overwrite_settings;
 	u32 msg_tx_hold;
@@ -83,9 +80,6 @@ struct bnx2x_admin_priority_app_table {
 		u32 app_id;
 };
 
-/*******************************************************************************
- * DCBX protocol configuration parameters.
- ******************************************************************************/
 struct bnx2x_config_dcbx_params {
 	u32 overwrite_settings;
 	u32 admin_dcbx_version;
@@ -183,9 +177,13 @@ void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled);
 
 enum {
 	BNX2X_DCBX_STATE_NEG_RECEIVED = 0x1,
-	BNX2X_DCBX_STATE_TX_PAUSED = 0x2,
-	BNX2X_DCBX_STATE_TX_RELEASED = 0x4
+#ifdef BCM_CNIC
+	BNX2X_DCBX_STATE_ISCSI_STOPPED,
+#endif
+	BNX2X_DCBX_STATE_TX_PAUSED,
+	BNX2X_DCBX_STATE_TX_RELEASED
 };
+
 void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state);
 
 /* DCB netlink */
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index f5050155c6b..727fe89ff37 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -1,6 +1,6 @@
 /* bnx2x_ethtool.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -167,6 +167,7 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 	int cfg_idx = bnx2x_get_link_cfg_idx(bp);
+
 	/* Dual Media boards present all available port types */
 	cmd->supported = bp->port.supported[cfg_idx] |
 		(bp->port.supported[cfg_idx ^ 1] &
@@ -176,16 +177,16 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	if ((bp->state == BNX2X_STATE_OPEN) &&
 	    !(bp->flags & MF_FUNC_DIS) &&
 	    (bp->link_vars.link_up)) {
-		cmd->speed = bp->link_vars.line_speed;
+		ethtool_cmd_speed_set(cmd, bp->link_vars.line_speed);
 		cmd->duplex = bp->link_vars.duplex;
 	} else {
-
-		cmd->speed = bp->link_params.req_line_speed[cfg_idx];
+		ethtool_cmd_speed_set(
+			cmd, bp->link_params.req_line_speed[cfg_idx]);
 		cmd->duplex = bp->link_params.req_duplex[cfg_idx];
 	}
 
 	if (IS_MF(bp))
-		cmd->speed = bnx2x_get_mf_speed(bp);
+		ethtool_cmd_speed_set(cmd, bnx2x_get_mf_speed(bp));
 
 	if (bp->port.supported[cfg_idx] & SUPPORTED_TP)
 		cmd->port = PORT_TP;
@@ -206,10 +207,11 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	cmd->maxrxpkt = 0;
 
 	DP(NETIF_MSG_LINK, "ethtool_cmd: cmd %d\n"
-	   DP_LEVEL "  supported 0x%x  advertising 0x%x  speed %d\n"
+	   DP_LEVEL "  supported 0x%x  advertising 0x%x  speed %u\n"
 	   DP_LEVEL "  duplex %d  port %d  phy_address %d  transceiver %d\n"
 	   DP_LEVEL "  autoneg %d  maxtxpkt %d  maxrxpkt %d\n",
-	   cmd->cmd, cmd->supported, cmd->advertising, cmd->speed,
+	   cmd->cmd, cmd->supported, cmd->advertising,
+	   ethtool_cmd_speed(cmd),
 	   cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
 	   cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
 
@@ -226,16 +228,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		return 0;
 
 	DP(NETIF_MSG_LINK, "ethtool_cmd: cmd %d\n"
-	   "  supported 0x%x  advertising 0x%x  speed %d speed_hi %d\n"
+	   "  supported 0x%x  advertising 0x%x  speed %u\n"
 	   "  duplex %d  port %d  phy_address %d  transceiver %d\n"
 	   "  autoneg %d  maxtxpkt %d  maxrxpkt %d\n",
-	   cmd->cmd, cmd->supported, cmd->advertising, cmd->speed,
-	   cmd->speed_hi,
+	   cmd->cmd, cmd->supported, cmd->advertising,
+	   ethtool_cmd_speed(cmd),
 	   cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
 	   cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
 
-	speed = cmd->speed;
-	speed |= (cmd->speed_hi << 16);
+	speed = ethtool_cmd_speed(cmd);
 
 	if (IS_MF_SI(bp)) {
 		u32 part;
@@ -439,7 +440,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			break;
 
 		default:
-			DP(NETIF_MSG_LINK, "Unsupported speed %d\n", speed);
+			DP(NETIF_MSG_LINK, "Unsupported speed %u\n", speed);
 			return -EINVAL;
 		}
 
@@ -1219,7 +1220,8 @@ static int bnx2x_set_ringparam(struct net_device *dev,
 	}
 
 	if ((ering->rx_pending > MAX_RX_AVAIL) ||
-	    (ering->rx_pending < MIN_RX_AVAIL) ||
+	    (ering->rx_pending < (bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
+						    MIN_RX_SIZE_TPA)) ||
 	    (ering->tx_pending > MAX_TX_AVAIL) ||
 	    (ering->tx_pending <= MAX_SKB_FRAGS + 4))
 		return -EINVAL;
@@ -1299,91 +1301,6 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 	return 0;
 }
 
-static int bnx2x_set_flags(struct net_device *dev, u32 data)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int changed = 0;
-	int rc = 0;
-
-	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
-		return -EAGAIN;
-	}
-
-	if (!(data & ETH_FLAG_RXVLAN))
-		return -EINVAL;
-
-	if ((data & ETH_FLAG_LRO) && bp->rx_csum && bp->disable_tpa)
-		return -EINVAL;
-
-	rc = ethtool_op_set_flags(dev, data, ETH_FLAG_LRO | ETH_FLAG_RXVLAN |
-					ETH_FLAG_TXVLAN | ETH_FLAG_RXHASH);
-	if (rc)
-		return rc;
-
-	/* TPA requires Rx CSUM offloading */
-	if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
-		if (!(bp->flags & TPA_ENABLE_FLAG)) {
-			bp->flags |= TPA_ENABLE_FLAG;
-			changed = 1;
-		}
-	} else if (bp->flags & TPA_ENABLE_FLAG) {
-		dev->features &= ~NETIF_F_LRO;
-		bp->flags &= ~TPA_ENABLE_FLAG;
-		changed = 1;
-	}
-
-	if (changed && netif_running(dev)) {
-		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
-	}
-
-	return rc;
-}
-
-static u32 bnx2x_get_rx_csum(struct net_device *dev)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-
-	return bp->rx_csum;
-}
-
-static int bnx2x_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int rc = 0;
-
-	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
-		return -EAGAIN;
-	}
-
-	bp->rx_csum = data;
-
-	/* Disable TPA, when Rx CSUM is disabled. Otherwise all
-	   TPA'ed packets will be discarded due to wrong TCP CSUM */
-	if (!data) {
-		u32 flags = ethtool_op_get_flags(dev);
-
-		rc = bnx2x_set_flags(dev, (flags & ~ETH_FLAG_LRO));
-	}
-
-	return rc;
-}
-
-static int bnx2x_set_tso(struct net_device *dev, u32 data)
-{
-	if (data) {
-		dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
-		dev->features |= NETIF_F_TSO6;
-	} else {
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO_ECN);
-		dev->features &= ~NETIF_F_TSO6;
-	}
-
-	return 0;
-}
-
 static const struct {
 	char string[ETH_GSTRING_LEN];
 } bnx2x_tests_str_arr[BNX2X_NUM_TESTS] = {
@@ -2097,36 +2014,37 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev,
 	}
 }
 
-static int bnx2x_phys_id(struct net_device *dev, u32 data)
+static int bnx2x_set_phys_id(struct net_device *dev,
+			     enum ethtool_phys_id_state state)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	int i;
 
 	if (!netif_running(dev))
-		return 0;
+		return -EAGAIN;
 
 	if (!bp->port.pmf)
-		return 0;
+		return -EOPNOTSUPP;
 
-	if (data == 0)
-		data = 2;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 1;	/* cycle on/off once per second */
 
-	for (i = 0; i < (data * 2); i++) {
-		if ((i % 2) == 0)
-			bnx2x_set_led(&bp->link_params, &bp->link_vars,
-				      LED_MODE_OPER, SPEED_1000);
-		else
-			bnx2x_set_led(&bp->link_params, &bp->link_vars,
-				      LED_MODE_OFF, 0);
+	case ETHTOOL_ID_ON:
+		bnx2x_set_led(&bp->link_params, &bp->link_vars,
+			      LED_MODE_ON, SPEED_1000);
+		break;
 
-		msleep_interruptible(500);
-		if (signal_pending(current))
-			break;
-	}
+	case ETHTOOL_ID_OFF:
+		bnx2x_set_led(&bp->link_params, &bp->link_vars,
+			      LED_MODE_FRONT_PANEL_OFF, 0);
+
+		break;
 
-	if (bp->link_vars.link_up)
-		bnx2x_set_led(&bp->link_params, &bp->link_vars, LED_MODE_OPER,
+	case ETHTOOL_ID_INACTIVE:
+		bnx2x_set_led(&bp->link_params, &bp->link_vars,
+			      LED_MODE_OPER,
 			      bp->link_vars.line_speed);
+	}
 
 	return 0;
 }
@@ -2205,20 +2123,10 @@ static const struct ethtool_ops bnx2x_ethtool_ops = {
 	.set_ringparam		= bnx2x_set_ringparam,
 	.get_pauseparam		= bnx2x_get_pauseparam,
 	.set_pauseparam		= bnx2x_set_pauseparam,
-	.get_rx_csum		= bnx2x_get_rx_csum,
-	.set_rx_csum		= bnx2x_set_rx_csum,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_hw_csum,
-	.set_flags		= bnx2x_set_flags,
-	.get_flags		= ethtool_op_get_flags,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
-	.get_tso		= ethtool_op_get_tso,
-	.set_tso		= bnx2x_set_tso,
 	.self_test		= bnx2x_self_test,
 	.get_sset_count		= bnx2x_get_sset_count,
 	.get_strings		= bnx2x_get_strings,
-	.phys_id		= bnx2x_phys_id,
+	.set_phys_id		= bnx2x_set_phys_id,
 	.get_ethtool_stats	= bnx2x_get_ethtool_stats,
 	.get_rxnfc		= bnx2x_get_rxnfc,
 	.get_rxfh_indir		= bnx2x_get_rxfh_indir,
diff --git a/drivers/net/bnx2x/bnx2x_fw_defs.h b/drivers/net/bnx2x/bnx2x_fw_defs.h
index f4e5b1ce814..9fe367836a5 100644
--- a/drivers/net/bnx2x/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x/bnx2x_fw_defs.h
@@ -1,6 +1,6 @@
 /* bnx2x_fw_defs.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_fw_file_hdr.h b/drivers/net/bnx2x/bnx2x_fw_file_hdr.h
index f807262911e..f4a07fbaed0 100644
--- a/drivers/net/bnx2x/bnx2x_fw_file_hdr.h
+++ b/drivers/net/bnx2x/bnx2x_fw_file_hdr.h
@@ -1,6 +1,6 @@
 /* bnx2x_fw_file_hdr.h: FW binary file header structure.
  *
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index be503cc0a50..cdf19fe7c7f 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -1,6 +1,6 @@
 /* bnx2x_hsi.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1929,7 +1929,7 @@ struct host_func_stats {
 
 #define BCM_5710_FW_MAJOR_VERSION			6
 #define BCM_5710_FW_MINOR_VERSION			2
-#define BCM_5710_FW_REVISION_VERSION			5
+#define BCM_5710_FW_REVISION_VERSION			9
 #define BCM_5710_FW_ENGINEERING_VERSION			0
 #define BCM_5710_FW_COMPILE_FLAGS			1
 
@@ -3019,7 +3019,7 @@ struct tstorm_eth_mac_filter_config {
 
 
 /*
- * common flag to indicate existance of TPA.
+ * common flag to indicate existence of TPA.
  */
 struct tstorm_eth_tpa_exist {
 #if defined(__BIG_ENDIAN)
diff --git a/drivers/net/bnx2x/bnx2x_init.h b/drivers/net/bnx2x/bnx2x_init.h
index fa6dbe3f205..d5399206f66 100644
--- a/drivers/net/bnx2x/bnx2x_init.h
+++ b/drivers/net/bnx2x/bnx2x_init.h
@@ -1,7 +1,7 @@
 /* bnx2x_init.h: Broadcom Everest network driver.
  *               Structures and macroes needed during the initialization.
  *
- * Copyright (c) 2007-2009 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_init_ops.h b/drivers/net/bnx2x/bnx2x_init_ops.h
index 66df29fcf75..aafd0232393 100644
--- a/drivers/net/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/bnx2x/bnx2x_init_ops.h
@@ -2,7 +2,7 @@
  *               Static functions needed during the initialization.
  *               This file is "included" in bnx2x_main.c.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index f2f367d4e74..076e11f5769 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -385,7 +385,7 @@ u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos)
 	return 0;
 }
 /******************************************************************/
-/*			ETS section				  */
+/*			PFC section				  */
 /******************************************************************/
 
 static void bnx2x_bmac2_get_pfc_stat(struct link_params *params,
@@ -1301,14 +1301,12 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
 	return 0;
 }
 
-/*
- * get_emac_base
- *
- * @param cb
- * @param mdc_mdio_access
- * @param port
+/**
+ * bnx2x_get_emac_base - retrive emac base address
  *
- * @return u32
+ * @bp:			driver handle
+ * @mdc_mdio_access:	access type
+ * @port:		port id
  *
  * This function selects the MDC/MDIO access (through emac0 or
  * emac1) depend on the mdc_mdio_access, port, port swapped. Each
@@ -2823,7 +2821,7 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp,
 				     struct link_params *params)
 {
 	u16 cnt, ctrl;
-	/* Wait for soft reset to get cleared upto 1 sec */
+	/* Wait for soft reset to get cleared up to 1 sec */
 	for (cnt = 0; cnt < 1000; cnt++) {
 		bnx2x_cl45_read(bp, phy,
 				MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl);
@@ -4141,7 +4139,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
 			val = (1<<5);
 			/*
 			 * Note that 2.5G works only when used with 1G
-			 * advertisment
+			 * advertisement
 			 */
 		} else
 			val = (1<<5);
@@ -4151,7 +4149,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
 			PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
 			val |= (1<<7);
 
-		/* Note that 2.5G works only when used with 1G advertisment */
+		/* Note that 2.5G works only when used with 1G advertisement */
 		if (phy->speed_cap_mask &
 			(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
 			 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
@@ -5232,14 +5230,14 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
 		bnx2x_cl45_write(bp, phy,
 				 MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1);
 	} else {
-		/* Force 1Gbps using autoneg with 1G advertisment */
+		/* Force 1Gbps using autoneg with 1G advertisement */
 
 		/* Allow CL37 through CL73 */
 		DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
 		bnx2x_cl45_write(bp, phy,
 				 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
 
-		/* Enable Full-Duplex advertisment on CL37 */
+		/* Enable Full-Duplex advertisement on CL37 */
 		bnx2x_cl45_write(bp, phy,
 				 MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020);
 		/* Enable CL37 AN */
@@ -6269,7 +6267,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
 
 	switch (actual_phy_selection) {
 	case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
-		/* Do nothing. Essentialy this is like the priority copper */
+		/* Do nothing. Essentially this is like the priority copper */
 		break;
 	case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
 		val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER;
@@ -7765,7 +7763,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
 	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
 
 	msleep(10);
-	/* The PHY reset is controled by GPIO 1
+	/* The PHY reset is controlled by GPIO 1
 	 * Hold it as vars low
 	 */
 	 /* clear link led */
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 32e64cc85d2..f45c0caf324 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -1,6 +1,6 @@
 /* bnx2x_main.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -2036,7 +2036,7 @@ static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp)
 	return CMNG_FNS_NONE;
 }
 
-static void bnx2x_read_mf_cfg(struct bnx2x *bp)
+void bnx2x_read_mf_cfg(struct bnx2x *bp)
 {
 	int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1);
 
@@ -2123,7 +2123,6 @@ static inline void bnx2x_link_sync_notify(struct bnx2x *bp)
 /* This function is called upon link interrupt */
 static void bnx2x_link_attn(struct bnx2x *bp)
 {
-	u32 prev_link_status = bp->link_vars.link_status;
 	/* Make sure that we are synced with the current statistics */
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
@@ -2168,17 +2167,15 @@ static void bnx2x_link_attn(struct bnx2x *bp)
 			   "single function mode without fairness\n");
 	}
 
+	__bnx2x_link_report(bp);
+
 	if (IS_MF(bp))
 		bnx2x_link_sync_notify(bp);
-
-	/* indicate link status only if link status actually changed */
-	if (prev_link_status != bp->link_vars.link_status)
-		bnx2x_link_report(bp);
 }
 
 void bnx2x__link_status_update(struct bnx2x *bp)
 {
-	if ((bp->state != BNX2X_STATE_OPEN) || (bp->flags & MF_FUNC_DIS))
+	if (bp->state != BNX2X_STATE_OPEN)
 		return;
 
 	bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
@@ -2188,10 +2185,6 @@ void bnx2x__link_status_update(struct bnx2x *bp)
 	else
 		bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	/* the link status update could be the result of a DCC event
-	   hence re-read the shmem mf configuration */
-	bnx2x_read_mf_cfg(bp);
-
 	/* indicate link status */
 	bnx2x_link_report(bp);
 }
@@ -3120,10 +3113,14 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
 			if (val & DRV_STATUS_SET_MF_BW)
 				bnx2x_set_mf_bw(bp);
 
-			bnx2x__link_status_update(bp);
 			if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
 				bnx2x_pmf_update(bp);
 
+			/* Always call it here: bnx2x_link_report() will
+			 * prevent the link indication duplication.
+			 */
+			bnx2x__link_status_update(bp);
+
 			if (bp->port.pmf &&
 			    (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
 				bp->dcbx_enabled > 0)
@@ -3702,7 +3699,7 @@ static void bnx2x_eq_int(struct bnx2x *bp)
 	if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE)
 		hw_cons++;
 
-	/* This function may never run in parralel with itself for a
+	/* This function may never run in parallel with itself for a
 	 * specific bp, thus there is no need in "paired" read memory
 	 * barrier here.
 	 */
@@ -3904,10 +3901,9 @@ static void bnx2x_timer(unsigned long data)
 
 	if (poll) {
 		struct bnx2x_fastpath *fp = &bp->fp[0];
-		int rc;
 
 		bnx2x_tx_int(fp);
-		rc = bnx2x_rx_int(fp, 1000);
+		bnx2x_rx_int(fp, 1000);
 	}
 
 	if (!BP_NOMCP(bp)) {
@@ -4062,7 +4058,6 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
 	struct hc_status_block_data_e2 sb_data_e2;
 	struct hc_status_block_data_e1x sb_data_e1x;
 	struct hc_status_block_sm  *hc_sm_p;
-	struct hc_index_data *hc_index_p;
 	int data_size;
 	u32 *sb_data_p;
 
@@ -4083,7 +4078,6 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
 		sb_data_e2.common.host_sb_addr.hi = U64_HI(mapping);
 		sb_data_e2.common.host_sb_addr.lo = U64_LO(mapping);
 		hc_sm_p = sb_data_e2.common.state_machine;
-		hc_index_p = sb_data_e2.index_data;
 		sb_data_p = (u32 *)&sb_data_e2;
 		data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
 	} else {
@@ -4097,7 +4091,6 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
 		sb_data_e1x.common.host_sb_addr.hi = U64_HI(mapping);
 		sb_data_e1x.common.host_sb_addr.lo = U64_LO(mapping);
 		hc_sm_p = sb_data_e1x.common.state_machine;
-		hc_index_p = sb_data_e1x.index_data;
 		sb_data_p = (u32 *)&sb_data_e1x;
 		data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
 	}
@@ -4454,7 +4447,7 @@ static void bnx2x_init_fp_sb(struct bnx2x *bp, int fp_idx)
 
 	fp->state = BNX2X_FP_STATE_CLOSED;
 
-	fp->index = fp->cid = fp_idx;
+	fp->cid = fp_idx;
 	fp->cl_id = BP_L_ID(bp) + fp_idx;
 	fp->fw_sb_id = bp->base_fw_ndsb + fp->cl_id + CNIC_CONTEXT_USE;
 	fp->igu_sb_id = bp->igu_base_sb + fp_idx + CNIC_CONTEXT_USE;
@@ -4566,9 +4559,11 @@ gunzip_nomem1:
 
 static void bnx2x_gunzip_end(struct bnx2x *bp)
 {
-	kfree(bp->strm->workspace);
-	kfree(bp->strm);
-	bp->strm = NULL;
+	if (bp->strm) {
+		kfree(bp->strm->workspace);
+		kfree(bp->strm);
+		bp->strm = NULL;
+	}
 
 	if (bp->gunzip_buf) {
 		dma_free_coherent(&bp->pdev->dev, FW_BUF_SIZE, bp->gunzip_buf,
@@ -5089,7 +5084,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
 		/* Step 1: set zeroes to all ilt page entries with valid bit on
 		 * Step 2: set the timers first/last ilt entry to point
 		 * to the entire range to prevent ILT range error for 3rd/4th
-		 * vnic	(this code assumes existance of the vnic)
+		 * vnic	(this code assumes existence of the vnic)
 		 *
 		 * both steps performed by call to bnx2x_ilt_client_init_op()
 		 * with dummy TM client
@@ -5876,9 +5871,6 @@ int bnx2x_init_hw(struct bnx2x *bp, u32 load_code)
 
 	bp->dmae_ready = 0;
 	spin_lock_init(&bp->dmae_lock);
-	rc = bnx2x_gunzip_init(bp);
-	if (rc)
-		return rc;
 
 	switch (load_code) {
 	case FW_MSG_CODE_DRV_LOAD_COMMON:
@@ -5922,80 +5914,10 @@ init_hw_err:
 
 void bnx2x_free_mem(struct bnx2x *bp)
 {
-
-#define BNX2X_PCI_FREE(x, y, size) \
-	do { \
-		if (x) { \
-			dma_free_coherent(&bp->pdev->dev, size, (void *)x, y); \
-			x = NULL; \
-			y = 0; \
-		} \
-	} while (0)
-
-#define BNX2X_FREE(x) \
-	do { \
-		if (x) { \
-			kfree((void *)x); \
-			x = NULL; \
-		} \
-	} while (0)
-
-	int i;
+	bnx2x_gunzip_end(bp);
 
 	/* fastpath */
-	/* Common */
-	for_each_queue(bp, i) {
-#ifdef BCM_CNIC
-		/* FCoE client uses default status block */
-		if (IS_FCOE_IDX(i)) {
-			union host_hc_status_block *sb =
-				&bnx2x_fp(bp, i, status_blk);
-			memset(sb, 0, sizeof(union host_hc_status_block));
-			bnx2x_fp(bp, i, status_blk_mapping) = 0;
-		} else {
-#endif
-		/* status blocks */
-		if (CHIP_IS_E2(bp))
-			BNX2X_PCI_FREE(bnx2x_fp(bp, i, status_blk.e2_sb),
-				       bnx2x_fp(bp, i, status_blk_mapping),
-				       sizeof(struct host_hc_status_block_e2));
-		else
-			BNX2X_PCI_FREE(bnx2x_fp(bp, i, status_blk.e1x_sb),
-				       bnx2x_fp(bp, i, status_blk_mapping),
-				       sizeof(struct host_hc_status_block_e1x));
-#ifdef BCM_CNIC
-		}
-#endif
-	}
-	/* Rx */
-	for_each_rx_queue(bp, i) {
-
-		/* fastpath rx rings: rx_buf rx_desc rx_comp */
-		BNX2X_FREE(bnx2x_fp(bp, i, rx_buf_ring));
-		BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_desc_ring),
-			       bnx2x_fp(bp, i, rx_desc_mapping),
-			       sizeof(struct eth_rx_bd) * NUM_RX_BD);
-
-		BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_comp_ring),
-			       bnx2x_fp(bp, i, rx_comp_mapping),
-			       sizeof(struct eth_fast_path_rx_cqe) *
-			       NUM_RCQ_BD);
-
-		/* SGE ring */
-		BNX2X_FREE(bnx2x_fp(bp, i, rx_page_ring));
-		BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_sge_ring),
-			       bnx2x_fp(bp, i, rx_sge_mapping),
-			       BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
-	}
-	/* Tx */
-	for_each_tx_queue(bp, i) {
-
-		/* fastpath tx rings: tx_buf tx_desc */
-		BNX2X_FREE(bnx2x_fp(bp, i, tx_buf_ring));
-		BNX2X_PCI_FREE(bnx2x_fp(bp, i, tx_desc_ring),
-			       bnx2x_fp(bp, i, tx_desc_mapping),
-			       sizeof(union eth_tx_bd_types) * NUM_TX_BD);
-	}
+	bnx2x_free_fp_mem(bp);
 	/* end of fastpath */
 
 	BNX2X_PCI_FREE(bp->def_status_blk, bp->def_status_blk_mapping,
@@ -6028,101 +5950,13 @@ void bnx2x_free_mem(struct bnx2x *bp)
 		       BCM_PAGE_SIZE * NUM_EQ_PAGES);
 
 	BNX2X_FREE(bp->rx_indir_table);
-
-#undef BNX2X_PCI_FREE
-#undef BNX2X_KFREE
 }
 
-static inline void set_sb_shortcuts(struct bnx2x *bp, int index)
-{
-	union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk);
-	if (CHIP_IS_E2(bp)) {
-		bnx2x_fp(bp, index, sb_index_values) =
-			(__le16 *)status_blk.e2_sb->sb.index_values;
-		bnx2x_fp(bp, index, sb_running_index) =
-			(__le16 *)status_blk.e2_sb->sb.running_index;
-	} else {
-		bnx2x_fp(bp, index, sb_index_values) =
-			(__le16 *)status_blk.e1x_sb->sb.index_values;
-		bnx2x_fp(bp, index, sb_running_index) =
-			(__le16 *)status_blk.e1x_sb->sb.running_index;
-	}
-}
 
 int bnx2x_alloc_mem(struct bnx2x *bp)
 {
-#define BNX2X_PCI_ALLOC(x, y, size) \
-	do { \
-		x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
-		if (x == NULL) \
-			goto alloc_mem_err; \
-		memset(x, 0, size); \
-	} while (0)
-
-#define BNX2X_ALLOC(x, size) \
-	do { \
-		x = kzalloc(size, GFP_KERNEL); \
-		if (x == NULL) \
-			goto alloc_mem_err; \
-	} while (0)
-
-	int i;
-
-	/* fastpath */
-	/* Common */
-	for_each_queue(bp, i) {
-		union host_hc_status_block *sb = &bnx2x_fp(bp, i, status_blk);
-		bnx2x_fp(bp, i, bp) = bp;
-		/* status blocks */
-#ifdef BCM_CNIC
-		if (!IS_FCOE_IDX(i)) {
-#endif
-			if (CHIP_IS_E2(bp))
-				BNX2X_PCI_ALLOC(sb->e2_sb,
-				    &bnx2x_fp(bp, i, status_blk_mapping),
-				    sizeof(struct host_hc_status_block_e2));
-			else
-				BNX2X_PCI_ALLOC(sb->e1x_sb,
-				    &bnx2x_fp(bp, i, status_blk_mapping),
-				    sizeof(struct host_hc_status_block_e1x));
-#ifdef BCM_CNIC
-		}
-#endif
-		set_sb_shortcuts(bp, i);
-	}
-	/* Rx */
-	for_each_queue(bp, i) {
-
-		/* fastpath rx rings: rx_buf rx_desc rx_comp */
-		BNX2X_ALLOC(bnx2x_fp(bp, i, rx_buf_ring),
-				sizeof(struct sw_rx_bd) * NUM_RX_BD);
-		BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_desc_ring),
-				&bnx2x_fp(bp, i, rx_desc_mapping),
-				sizeof(struct eth_rx_bd) * NUM_RX_BD);
-
-		BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_comp_ring),
-				&bnx2x_fp(bp, i, rx_comp_mapping),
-				sizeof(struct eth_fast_path_rx_cqe) *
-				NUM_RCQ_BD);
-
-		/* SGE ring */
-		BNX2X_ALLOC(bnx2x_fp(bp, i, rx_page_ring),
-				sizeof(struct sw_rx_page) * NUM_RX_SGE);
-		BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, rx_sge_ring),
-				&bnx2x_fp(bp, i, rx_sge_mapping),
-				BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
-	}
-	/* Tx */
-	for_each_queue(bp, i) {
-
-		/* fastpath tx rings: tx_buf tx_desc */
-		BNX2X_ALLOC(bnx2x_fp(bp, i, tx_buf_ring),
-				sizeof(struct sw_tx_bd) * NUM_TX_BD);
-		BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, tx_desc_ring),
-				&bnx2x_fp(bp, i, tx_desc_mapping),
-				sizeof(union eth_tx_bd_types) * NUM_TX_BD);
-	}
-	/* end of fastpath */
+	if (bnx2x_gunzip_init(bp))
+		return -ENOMEM;
 
 #ifdef BCM_CNIC
 	if (CHIP_IS_E2(bp))
@@ -6162,14 +5996,18 @@ int bnx2x_alloc_mem(struct bnx2x *bp)
 
 	BNX2X_ALLOC(bp->rx_indir_table, sizeof(bp->rx_indir_table[0]) *
 		    TSTORM_INDIRECTION_TABLE_SIZE);
+
+	/* fastpath */
+	/* need to be done at the end, since it's self adjusting to amount
+	 * of memory available for RSS queues
+	 */
+	if (bnx2x_alloc_fp_mem(bp))
+		goto alloc_mem_err;
 	return 0;
 
 alloc_mem_err:
 	bnx2x_free_mem(bp);
 	return -ENOMEM;
-
-#undef BNX2X_PCI_ALLOC
-#undef BNX2X_ALLOC
 }
 
 /*
@@ -6197,14 +6035,14 @@ static int bnx2x_func_stop(struct bnx2x *bp)
 }
 
 /**
- * Sets a MAC in a CAM for a few L2 Clients for E1x chips
+ * bnx2x_set_mac_addr_gen - set a MAC in a CAM for a few L2 Clients for E1x chips
  *
- * @param bp driver descriptor
- * @param set set or clear an entry (1 or 0)
- * @param mac pointer to a buffer containing a MAC
- * @param cl_bit_vec bit vector of clients to register a MAC for
- * @param cam_offset offset in a CAM to use
- * @param is_bcast is the set MAC a broadcast address (for E1 only)
+ * @bp:		driver handle
+ * @set:	set or clear an entry (1 or 0)
+ * @mac:	pointer to a buffer containing a MAC
+ * @cl_bit_vec:	bit vector of clients to register a MAC for
+ * @cam_offset:	offset in a CAM to use
+ * @is_bcast:	is the set MAC a broadcast address (for E1 only)
  */
 static void bnx2x_set_mac_addr_gen(struct bnx2x *bp, int set, const u8 *mac,
 				   u32 cl_bit_vec, u8 cam_offset,
@@ -6564,14 +6402,13 @@ void bnx2x_invalidate_e1h_mc_list(struct bnx2x *bp)
 
 #ifdef BCM_CNIC
 /**
- * Set iSCSI MAC(s) at the next enties in the CAM after the ETH
- * MAC(s). This function will wait until the ramdord completion
- * returns.
+ * bnx2x_set_iscsi_eth_mac_addr - set iSCSI MAC(s).
  *
- * @param bp driver handle
- * @param set set or clear the CAM entry
+ * @bp:		driver handle
+ * @set:	set or clear the CAM entry
  *
- * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ * This function will wait until the ramdord completion returns.
+ * Return 0 if success, -ENODEV if ramrod doesn't return.
  */
 static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
 {
@@ -6592,14 +6429,13 @@ static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
 }
 
 /**
- * Set FCoE L2 MAC(s) at the next enties in the CAM after the
- * ETH MAC(s). This function will wait until the ramdord
- * completion returns.
+ * bnx2x_set_fip_eth_mac_addr - set FCoE L2 MAC(s)
  *
- * @param bp driver handle
- * @param set set or clear the CAM entry
+ * @bp:		driver handle
+ * @set:	set or clear the CAM entry
  *
- * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ * This function will wait until the ramrod completion returns.
+ * Returns 0 if success, -ENODEV if ramrod doesn't return.
  */
 int bnx2x_set_fip_eth_mac_addr(struct bnx2x *bp, int set)
 {
@@ -6803,12 +6639,11 @@ static int bnx2x_setup_fw_client(struct bnx2x *bp,
 }
 
 /**
- * Configure interrupt mode according to current configuration.
- * In case of MSI-X it will also try to enable MSI-X.
+ * bnx2x_set_int_mode - configure interrupt mode
  *
- * @param bp
+ * @bp:		driver handle
  *
- * @return int
+ * In case of MSI-X it will also try to enable MSI-X.
  */
 static int __devinit bnx2x_set_int_mode(struct bnx2x *bp)
 {
@@ -7392,10 +7227,11 @@ static void bnx2x_clp_reset_prep(struct bnx2x *bp, u32 *magic_val)
 	MF_CFG_WR(bp, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
 }
 
-/* Restore the value of the `magic' bit.
+/**
+ * bnx2x_clp_reset_done - restore the value of the `magic' bit.
  *
- * @param pdev Device handle.
- * @param magic_val Old value of the `magic' bit.
+ * @bp:		driver handle
+ * @magic_val:	old value of the `magic' bit.
  */
 static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val)
 {
@@ -7406,10 +7242,12 @@ static void bnx2x_clp_reset_done(struct bnx2x *bp, u32 magic_val)
 }
 
 /**
- * Prepares for MCP reset: takes care of CLP configurations.
+ * bnx2x_reset_mcp_prep - prepare for MCP reset.
  *
- * @param bp
- * @param magic_val Old value of 'magic' bit.
+ * @bp:		driver handle
+ * @magic_val:	old value of 'magic' bit.
+ *
+ * Takes care of CLP configurations.
  */
 static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val)
 {
@@ -7434,10 +7272,10 @@ static void bnx2x_reset_mcp_prep(struct bnx2x *bp, u32 *magic_val)
 #define MCP_TIMEOUT      5000   /* 5 seconds (in ms) */
 #define MCP_ONE_TIMEOUT  100    /* 100 ms */
 
-/* Waits for MCP_ONE_TIMEOUT or MCP_ONE_TIMEOUT*10,
- * depending on the HW type.
+/**
+ * bnx2x_mcp_wait_one - wait for MCP_ONE_TIMEOUT
  *
- * @param bp
+ * @bp:	driver handle
  */
 static inline void bnx2x_mcp_wait_one(struct bnx2x *bp)
 {
@@ -8059,13 +7897,9 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 		(val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
 		FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
 
-	if (BP_E1HVN(bp) == 0) {
-		pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
-		bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
-	} else {
-		/* no WOL capability for E1HVN != 0 */
-		bp->flags |= NO_WOL_FLAG;
-	}
+	pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
+	bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
+
 	BNX2X_DEV_INFO("%sWoL capable\n",
 		       (bp->flags & NO_WOL_FLAG) ? "not " : "");
 
@@ -8571,15 +8405,6 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
 				BNX2X_DEV_INFO("Read iSCSI MAC: "
 					       "0x%x:0x%04x\n", val2, val);
 				bnx2x_set_mac_buf(iscsi_mac, val, val2);
-
-				/* Disable iSCSI OOO if MAC configuration is
-				 * invalid.
-				 */
-				if (!is_valid_ether_addr(iscsi_mac)) {
-					bp->flags |= NO_ISCSI_OOO_FLAG |
-						     NO_ISCSI_FLAG;
-					memset(iscsi_mac, 0, ETH_ALEN);
-				}
 			} else
 				bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
 
@@ -8592,13 +8417,6 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
 					       "0x%x:0x%04x\n", val2, val);
 				bnx2x_set_mac_buf(fip_mac, val, val2);
 
-				/* Disable FCoE if MAC configuration is
-				 * invalid.
-				 */
-				if (!is_valid_ether_addr(fip_mac)) {
-					bp->flags |= NO_FCOE_FLAG;
-					memset(bp->fip_mac, 0, ETH_ALEN);
-				}
 			} else
 				bp->flags |= NO_FCOE_FLAG;
 		}
@@ -8629,13 +8447,29 @@ static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
 		else if (!IS_MF(bp))
 			memcpy(fip_mac, iscsi_mac, ETH_ALEN);
 	}
+
+	/* Disable iSCSI if MAC configuration is
+	 * invalid.
+	 */
+	if (!is_valid_ether_addr(iscsi_mac)) {
+		bp->flags |= NO_ISCSI_FLAG;
+		memset(iscsi_mac, 0, ETH_ALEN);
+	}
+
+	/* Disable FCoE if MAC configuration is
+	 * invalid.
+	 */
+	if (!is_valid_ether_addr(fip_mac)) {
+		bp->flags |= NO_FCOE_FLAG;
+		memset(bp->fip_mac, 0, ETH_ALEN);
+	}
 #endif
 }
 
 static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 {
 	int /*abs*/func = BP_ABS_FUNC(bp);
-	int vn, port;
+	int vn;
 	u32 val = 0;
 	int rc = 0;
 
@@ -8670,7 +8504,6 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 	bp->mf_ov = 0;
 	bp->mf_mode = 0;
 	vn = BP_E1HVN(bp);
-	port = BP_PORT(bp);
 
 	if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
 		DP(NETIF_MSG_PROBE,
@@ -8685,7 +8518,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 				E1H_FUNC_MAX * sizeof(struct drv_func_mb);
 		/*
 		 * get mf configuration:
-		 * 1. existance of MF configuration
+		 * 1. existence of MF configuration
 		 * 2. MAC address must be legal (check only upper bytes)
 		 *    for  Switch-Independent mode;
 		 *    OVLAN must be legal for Switch-Dependent mode
@@ -8727,7 +8560,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 			default:
 				/* Unknown configuration: reset mf_config */
 				bp->mf_config[vn] = 0;
-				DP(NETIF_MSG_PROBE, "Unkown MF mode 0x%x\n",
+				DP(NETIF_MSG_PROBE, "Unknown MF mode 0x%x\n",
 				   val);
 			}
 		}
@@ -8904,8 +8737,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	bp->multi_mode = multi_mode;
 	bp->int_mode = int_mode;
 
-	bp->dev->features |= NETIF_F_GRO;
-
 	/* Set TPA flags */
 	if (disable_tpa) {
 		bp->flags &= ~TPA_ENABLE_FLAG;
@@ -8925,8 +8756,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 
 	bp->tx_ring_size = MAX_TX_AVAIL;
 
-	bp->rx_csum = 1;
-
 	/* make sure that the numbers are in the right granularity */
 	bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
 	bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
@@ -9304,6 +9133,8 @@ static const struct net_device_ops bnx2x_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= bnx2x_ioctl,
 	.ndo_change_mtu		= bnx2x_change_mtu,
+	.ndo_fix_features	= bnx2x_fix_features,
+	.ndo_set_features	= bnx2x_set_features,
 	.ndo_tx_timeout		= bnx2x_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= poll_bnx2x,
@@ -9430,20 +9261,20 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 
 	dev->netdev_ops = &bnx2x_netdev_ops;
 	bnx2x_set_ethtool_ops(dev);
-	dev->features |= NETIF_F_SG;
-	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
+		NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_HW_VLAN_TX;
+
+	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
+
+	dev->features |= dev->hw_features | NETIF_F_HW_VLAN_RX;
 	if (bp->flags & USING_DAC_FLAG)
 		dev->features |= NETIF_F_HIGHDMA;
-	dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
-	dev->features |= NETIF_F_TSO6;
-	dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
 
-	dev->vlan_features |= NETIF_F_SG;
-	dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-	if (bp->flags & USING_DAC_FLAG)
-		dev->vlan_features |= NETIF_F_HIGHDMA;
-	dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
-	dev->vlan_features |= NETIF_F_TSO6;
+	/* Add Loopback capability to the device */
+	dev->hw_features |= NETIF_F_LOOPBACK;
 
 #ifdef BCM_DCBNL
 	dev->dcbnl_ops = &bnx2x_dcbnl_ops;
@@ -9777,7 +9608,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
 #endif
 
-	/* Configure interupt mode: try to enable MSI-X/MSI if
+	/* Configure interrupt mode: try to enable MSI-X/MSI if
 	 * needed, set bp->num_queues appropriately.
 	 */
 	bnx2x_set_int_mode(bp);
@@ -10342,6 +10173,11 @@ static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
 		break;
 	}
 
+	case DRV_CTL_ISCSI_STOPPED_CMD: {
+		bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_ISCSI_STOPPED);
+		break;
+	}
+
 	default:
 		BNX2X_ERR("unknown command %x\n", ctl->cmd);
 		rc = -EINVAL;
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 1c89f19a442..86bba25d2d3 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1,6 +1,6 @@
 /* bnx2x_reg.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -175,9 +175,9 @@
    the initial credit value; read returns the current value of the credit
    counter. Must be initialized to 1 at start-up. */
 #define CCM_REG_CFC_INIT_CRD					 0xd0204
-/* [RW 2] Auxillary counter flag Q number 1. */
+/* [RW 2] Auxiliary counter flag Q number 1. */
 #define CCM_REG_CNT_AUX1_Q					 0xd00c8
-/* [RW 2] Auxillary counter flag Q number 2. */
+/* [RW 2] Auxiliary counter flag Q number 2. */
 #define CCM_REG_CNT_AUX2_Q					 0xd00cc
 /* [RW 28] The CM header value for QM request (primary). */
 #define CCM_REG_CQM_CCM_HDR_P					 0xd008c
@@ -457,13 +457,13 @@
 #define CSDM_REG_AGG_INT_MODE_9 				 0xc21dc
 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 #define CSDM_REG_CFC_RSP_START_ADDR				 0xc2008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
 #define CSDM_REG_CMP_COUNTER_MAX0				 0xc201c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
 #define CSDM_REG_CMP_COUNTER_MAX1				 0xc2020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
 #define CSDM_REG_CMP_COUNTER_MAX2				 0xc2024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
 #define CSDM_REG_CMP_COUNTER_MAX3				 0xc2028
 /* [RW 13] The start address in the internal RAM for the completion
    counters. */
@@ -851,7 +851,7 @@
 #define IGU_REG_ATTN_MSG_ADDR_L				 0x130120
 /* [R 4] Debug: [3] - attention write done message is pending (0-no pending;
  * 1-pending). [2:0] = PFID. Pending means attention message was sent; but
- * write done didnt receive. */
+ * write done didn't receive. */
 #define IGU_REG_ATTN_WRITE_DONE_PENDING			 0x130030
 #define IGU_REG_BLOCK_CONFIGURATION				 0x130000
 #define IGU_REG_COMMAND_REG_32LSB_DATA				 0x130124
@@ -862,7 +862,7 @@
 #define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP			 0x130200
 /* [R 5] Debug: ctrl_fsm */
 #define IGU_REG_CTRL_FSM					 0x130064
-/* [R 1] data availble for error memory. If this bit is clear do not red
+/* [R 1] data available for error memory. If this bit is clear do not red
  * from error_handling_memory. */
 #define IGU_REG_ERROR_HANDLING_DATA_VALID			 0x130130
 /* [RW 11] Parity mask register #0 read/write */
@@ -3015,7 +3015,7 @@
    block. Should be used for close the gates. */
 #define PXP_REG_HST_DISCARD_DOORBELLS				 0x1030a4
 /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
-   should update accoring to 'hst_discard_doorbells' register when the state
+   should update according to 'hst_discard_doorbells' register when the state
    machine is idle */
 #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS			 0x1030a0
 /* [RW 1] When 1; new internal writes arriving to the block are discarded.
@@ -3023,7 +3023,7 @@
 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES			 0x1030a8
 /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
    means this PSWHST is discarding inputs from this client. Each bit should
-   update accoring to 'hst_discard_internal_writes' register when the state
+   update according to 'hst_discard_internal_writes' register when the state
    machine is idle. */
 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS		 0x10309c
 /* [WB 160] Used for initialization of the inbound interrupts memory */
@@ -3822,13 +3822,13 @@
 #define TSDM_REG_AGG_INT_T_1					 0x420bc
 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 #define TSDM_REG_CFC_RSP_START_ADDR				 0x42008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
 #define TSDM_REG_CMP_COUNTER_MAX0				 0x4201c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
 #define TSDM_REG_CMP_COUNTER_MAX1				 0x42020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
 #define TSDM_REG_CMP_COUNTER_MAX2				 0x42024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
 #define TSDM_REG_CMP_COUNTER_MAX3				 0x42028
 /* [RW 13] The start address in the internal RAM for the completion
    counters. */
@@ -4284,13 +4284,13 @@
 #define USDM_REG_AGG_INT_T_6					 0xc40d0
 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 #define USDM_REG_CFC_RSP_START_ADDR				 0xc4008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
 #define USDM_REG_CMP_COUNTER_MAX0				 0xc401c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
 #define USDM_REG_CMP_COUNTER_MAX1				 0xc4020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
 #define USDM_REG_CMP_COUNTER_MAX2				 0xc4024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
 #define USDM_REG_CMP_COUNTER_MAX3				 0xc4028
 /* [RW 13] The start address in the internal RAM for the completion
    counters. */
@@ -4798,13 +4798,13 @@
 #define XSDM_REG_AGG_INT_MODE_1 				 0x1661bc
 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 #define XSDM_REG_CFC_RSP_START_ADDR				 0x166008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
 #define XSDM_REG_CMP_COUNTER_MAX0				 0x16601c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
 #define XSDM_REG_CMP_COUNTER_MAX1				 0x166020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
 #define XSDM_REG_CMP_COUNTER_MAX2				 0x166024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
 #define XSDM_REG_CMP_COUNTER_MAX3				 0x166028
 /* [RW 13] The start address in the internal RAM for the completion
    counters. */
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index 3445ded6674..e535bfa0894 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -1,6 +1,6 @@
 /* bnx2x_stats.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x/bnx2x_stats.h b/drivers/net/bnx2x/bnx2x_stats.h
index 596798c4745..45d14d8bc1a 100644
--- a/drivers/net/bnx2x/bnx2x_stats.h
+++ b/drivers/net/bnx2x/bnx2x_stats.h
@@ -1,6 +1,6 @@
 /* bnx2x_stats.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2010 Broadcom Corporation
+ * Copyright (c) 2007-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile
index 3c5c014e82b..4c21bf6b8b2 100644
--- a/drivers/net/bonding/Makefile
+++ b/drivers/net/bonding/Makefile
@@ -9,6 +9,3 @@ bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o bond_debugfs.o
 proc-$(CONFIG_PROC_FS) += bond_procfs.o
 bonding-objs += $(proc-y)
 
-ipv6-$(subst m,y,$(CONFIG_IPV6)) += bond_ipv6.o
-bonding-objs += $(ipv6-y)
-
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 494bf960442..c7537abca4f 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -716,11 +716,9 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val)
 static u32 __get_agg_bandwidth(struct aggregator *aggregator)
 {
 	u32 bandwidth = 0;
-	u32 basic_speed;
 
 	if (aggregator->num_of_ports) {
-		basic_speed = __get_link_speed(aggregator->lag_ports);
-		switch (basic_speed) {
+		switch (__get_link_speed(aggregator->lag_ports)) {
 		case AD_LINK_SPEED_BITMASK_1MBPS:
 			bandwidth = aggregator->num_of_ports;
 			break;
@@ -1482,8 +1480,11 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best,
 
 static int agg_device_up(const struct aggregator *agg)
 {
-	return (netif_running(agg->slave->dev) &&
-		netif_carrier_ok(agg->slave->dev));
+	struct port *port = agg->lag_ports;
+	if (!port)
+		return 0;
+	return (netif_running(port->slave->dev) &&
+		netif_carrier_ok(port->slave->dev));
 }
 
 /**
@@ -2402,14 +2403,6 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
 	struct ad_info ad_info;
 	int res = 1;
 
-	/* make sure that the slaves list will
-	 * not change during tx
-	 */
-	read_lock(&bond->lock);
-
-	if (!BOND_IS_OK(bond))
-		goto out;
-
 	if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
 		pr_debug("%s: Error: bond_3ad_get_active_agg_info failed\n",
 			 dev->name);
@@ -2463,39 +2456,20 @@ out:
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
 	}
-	read_unlock(&bond->lock);
+
 	return NETDEV_TX_OK;
 }
 
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev)
+void bond_3ad_lacpdu_recv(struct sk_buff *skb, struct bonding *bond,
+			  struct slave *slave)
 {
-	struct bonding *bond = netdev_priv(dev);
-	struct slave *slave = NULL;
-	int ret = NET_RX_DROP;
-
-	if (!(dev->flags & IFF_MASTER))
-		goto out;
-
-	skb = skb_share_check(skb, GFP_ATOMIC);
-	if (!skb)
-		goto out;
+	if (skb->protocol != PKT_TYPE_LACPDU)
+		return;
 
 	if (!pskb_may_pull(skb, sizeof(struct lacpdu)))
-		goto out;
+		return;
 
 	read_lock(&bond->lock);
-	slave = bond_get_slave_by_dev(netdev_priv(dev), orig_dev);
-	if (!slave)
-		goto out_unlock;
-
 	bond_3ad_rx_indication((struct lacpdu *) skb->data, slave, skb->len);
-
-	ret = NET_RX_SUCCESS;
-
-out_unlock:
 	read_unlock(&bond->lock);
-out:
-	dev_kfree_skb(skb);
-
-	return ret;
 }
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index b28baff7086..0ee3f1632c4 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -39,7 +39,7 @@
 
 typedef struct mac_addr {
 	u8 mac_addr_value[ETH_ALEN];
-} mac_addr_t;
+} __packed mac_addr_t;
 
 enum {
 	BOND_AD_STABLE = 0,
@@ -134,12 +134,12 @@ typedef struct lacpdu {
 	u8 tlv_type_terminator;	     // = terminator
 	u8 terminator_length;	     // = 0
 	u8 reserved_50[50];	     // = 0
-} lacpdu_t;
+} __packed lacpdu_t;
 
 typedef struct lacpdu_header {
 	struct ethhdr hdr;
 	struct lacpdu lacpdu;
-} lacpdu_header_t;
+} __packed lacpdu_header_t;
 
 // Marker Protocol Data Unit(PDU) structure(43.5.3.2 in the 802.3ad standard)
 typedef struct bond_marker {
@@ -155,12 +155,12 @@ typedef struct bond_marker {
 	u8 tlv_type_terminator;	     //  = 0x00
 	u8 terminator_length;	     //  = 0x00
 	u8 reserved_90[90];	     //  = 0
-} bond_marker_t;
+} __packed bond_marker_t;
 
 typedef struct bond_marker_header {
 	struct ethhdr hdr;
 	struct bond_marker marker;
-} bond_marker_header_t;
+} __packed bond_marker_header_t;
 
 #pragma pack()
 
@@ -258,7 +258,6 @@ struct ad_bond_info {
 				 * requested
 				 */
 	struct timer_list ad_timer;
-	struct packet_type ad_pkt_type;
 };
 
 struct ad_slave_info {
@@ -280,7 +279,8 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave);
 void bond_3ad_handle_link_change(struct slave *slave, char link);
 int  bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
 int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev);
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev);
+void bond_3ad_lacpdu_recv(struct sk_buff *skb, struct bonding *bond,
+			  struct slave *slave);
 int bond_3ad_set_carrier(struct bonding *bond);
 #endif //__BOND_3AD_H__
 
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 9bc5de3e04a..8f2d2e7c70e 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -176,7 +176,7 @@ static int tlb_initialize(struct bonding *bond)
 	bond_info->tx_hashtbl = new_hashtbl;
 
 	for (i = 0; i < TLB_HASH_TABLE_SIZE; i++) {
-		tlb_init_table_entry(&bond_info->tx_hashtbl[i], 1);
+		tlb_init_table_entry(&bond_info->tx_hashtbl[i], 0);
 	}
 
 	_unlock_tx_hashtbl(bond);
@@ -308,49 +308,33 @@ static void rlb_update_entry_from_arp(struct bonding *bond, struct arp_pkt *arp)
 	_unlock_rx_hashtbl(bond);
 }
 
-static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct packet_type *ptype, struct net_device *orig_dev)
+static void rlb_arp_recv(struct sk_buff *skb, struct bonding *bond,
+			 struct slave *slave)
 {
-	struct bonding *bond;
-	struct arp_pkt *arp = (struct arp_pkt *)skb->data;
-	int res = NET_RX_DROP;
+	struct arp_pkt *arp;
 
-	while (bond_dev->priv_flags & IFF_802_1Q_VLAN)
-		bond_dev = vlan_dev_real_dev(bond_dev);
-
-	if (!(bond_dev->priv_flags & IFF_BONDING) ||
-	    !(bond_dev->flags & IFF_MASTER))
-		goto out;
+	if (skb->protocol != cpu_to_be16(ETH_P_ARP))
+		return;
 
+	arp = (struct arp_pkt *) skb->data;
 	if (!arp) {
 		pr_debug("Packet has no ARP data\n");
-		goto out;
+		return;
 	}
 
-	skb = skb_share_check(skb, GFP_ATOMIC);
-	if (!skb)
-		goto out;
-
-	if (!pskb_may_pull(skb, arp_hdr_len(bond_dev)))
-		goto out;
+	if (!pskb_may_pull(skb, arp_hdr_len(bond->dev)))
+		return;
 
 	if (skb->len < sizeof(struct arp_pkt)) {
 		pr_debug("Packet is too small to be an ARP\n");
-		goto out;
+		return;
 	}
 
 	if (arp->op_code == htons(ARPOP_REPLY)) {
 		/* update rx hash table for this ARP */
-		bond = netdev_priv(bond_dev);
 		rlb_update_entry_from_arp(bond, arp);
 		pr_debug("Server received an ARP Reply from client\n");
 	}
-
-	res = NET_RX_SUCCESS;
-
-out:
-	dev_kfree_skb(skb);
-
-	return res;
 }
 
 /* Caller must hold bond lock for read */
@@ -701,7 +685,7 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond)
 		 */
 		rlb_choose_channel(skb, bond);
 
-		/* The ARP relpy packets must be delayed so that
+		/* The ARP reply packets must be delayed so that
 		 * they can cancel out the influence of the ARP request.
 		 */
 		bond->alb_info.rlb_update_delay_counter = RLB_UPDATE_DELAY;
@@ -759,7 +743,6 @@ static void rlb_init_table_entry(struct rlb_client_info *entry)
 static int rlb_initialize(struct bonding *bond)
 {
 	struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
-	struct packet_type *pk_type = &(BOND_ALB_INFO(bond).rlb_pkt_type);
 	struct rlb_client_info	*new_hashtbl;
 	int size = RLB_HASH_TABLE_SIZE * sizeof(struct rlb_client_info);
 	int i;
@@ -784,13 +767,8 @@ static int rlb_initialize(struct bonding *bond)
 
 	_unlock_rx_hashtbl(bond);
 
-	/*initialize packet type*/
-	pk_type->type = cpu_to_be16(ETH_P_ARP);
-	pk_type->dev = bond->dev;
-	pk_type->func = rlb_arp_recv;
-
 	/* register to receive ARPs */
-	dev_add_pack(pk_type);
+	bond->recv_probe = rlb_arp_recv;
 
 	return 0;
 }
@@ -799,8 +777,6 @@ static void rlb_deinitialize(struct bonding *bond)
 {
 	struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
 
-	dev_remove_pack(&(bond_info->rlb_pkt_type));
-
 	_lock_rx_hashtbl(bond);
 
 	kfree(bond_info->rx_hashtbl);
@@ -1042,7 +1018,7 @@ static void alb_change_hw_addr_on_detach(struct bonding *bond, struct slave *sla
  *
  * If the permanent hw address of @slave is @bond's hw address, we need to
  * find a different hw address to give @slave, that isn't in use by any other
- * slave in the bond. This address must be, of course, one of the premanent
+ * slave in the bond. This address must be, of course, one of the permanent
  * addresses of the other slaves.
  *
  * We go over the slave list, and for each slave there we compare its
@@ -1249,16 +1225,10 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 	skb_reset_mac_header(skb);
 	eth_data = eth_hdr(skb);
 
-	/* make sure that the curr_active_slave and the slaves list do
-	 * not change during tx
+	/* make sure that the curr_active_slave do not change during tx
 	 */
-	read_lock(&bond->lock);
 	read_lock(&bond->curr_slave_lock);
 
-	if (!BOND_IS_OK(bond)) {
-		goto out;
-	}
-
 	switch (ntohs(skb->protocol)) {
 	case ETH_P_IP: {
 		const struct iphdr *iph = ip_hdr(skb);
@@ -1358,13 +1328,12 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 		}
 	}
 
-out:
 	if (res) {
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
 	}
 	read_unlock(&bond->curr_slave_lock);
-	read_unlock(&bond->lock);
+
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h
index 4b3e3587840..90f140a2d19 100644
--- a/drivers/net/bonding/bond_alb.h
+++ b/drivers/net/bonding/bond_alb.h
@@ -75,8 +75,8 @@ struct tlb_client_info {
 				 * gave this entry index.
 				 */
 	u32 tx_bytes;		/* Each Client accumulates the BytesTx that
-				 * were tranmitted to it, and after each
-				 * CallBack the LoadHistory is devided
+				 * were transmitted to it, and after each
+				 * CallBack the LoadHistory is divided
 				 * by the balance interval
 				 */
 	u32 load_history;	/* This field contains the amount of Bytes
@@ -122,7 +122,6 @@ struct tlb_slave_info {
 };
 
 struct alb_bond_info {
-	struct timer_list	alb_timer;
 	struct tlb_client_info	*tx_hashtbl; /* Dynamically allocated */
 	spinlock_t		tx_hashtbl_lock;
 	u32			unbalanced_load;
@@ -130,7 +129,6 @@ struct alb_bond_info {
 	int			lp_counter;
 	/* -------- rlb parameters -------- */
 	int rlb_enabled;
-	struct packet_type	rlb_pkt_type;
 	struct rlb_client_info	*rx_hashtbl;	/* Receive hash table */
 	spinlock_t		rx_hashtbl_lock;
 	u32			rx_hashtbl_head;
@@ -140,7 +138,6 @@ struct alb_bond_info {
 	struct slave		*next_rx_slave;/* next slave to be assigned
 						* to a new rx client for
 						*/
-	u32			rlb_interval_counter;
 	u8			primary_is_promisc;	   /* boolean */
 	u32			rlb_promisc_timeout_counter;/* counts primary
 							     * promiscuity time
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 16d6fe95469..088fd845ffd 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -89,8 +89,7 @@
 
 static int max_bonds	= BOND_DEFAULT_MAX_BONDS;
 static int tx_queues	= BOND_DEFAULT_TX_QUEUES;
-static int num_grat_arp = 1;
-static int num_unsol_na = 1;
+static int num_peer_notif = 1;
 static int miimon	= BOND_LINK_MON_INTERV;
 static int updelay;
 static int downdelay;
@@ -113,10 +112,10 @@ module_param(max_bonds, int, 0);
 MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
 module_param(tx_queues, int, 0);
 MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
-module_param(num_grat_arp, int, 0644);
-MODULE_PARM_DESC(num_grat_arp, "Number of gratuitous ARP packets to send on failover event");
-module_param(num_unsol_na, int, 0644);
-MODULE_PARM_DESC(num_unsol_na, "Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event");
+module_param_named(num_grat_arp, num_peer_notif, int, 0644);
+MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on failover event (alias of num_unsol_na)");
+module_param_named(num_unsol_na, num_peer_notif, int, 0644);
+MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on failover event (alias of num_grat_arp)");
 module_param(miimon, int, 0);
 MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
 module_param(updelay, int, 0);
@@ -234,7 +233,6 @@ struct bond_parm_tbl ad_select_tbl[] = {
 
 /*-------------------------- Forward declarations ---------------------------*/
 
-static void bond_send_gratuitous_arp(struct bonding *bond);
 static int bond_init(struct net_device *bond_dev);
 static void bond_uninit(struct net_device *bond_dev);
 
@@ -346,32 +344,6 @@ out:
 }
 
 /**
- * bond_has_challenged_slaves
- * @bond: the bond we're working on
- *
- * Searches the slave list. Returns 1 if a vlan challenged slave
- * was found, 0 otherwise.
- *
- * Assumes bond->lock is held.
- */
-static int bond_has_challenged_slaves(struct bonding *bond)
-{
-	struct slave *slave;
-	int i;
-
-	bond_for_each_slave(bond, slave, i) {
-		if (slave->dev->features & NETIF_F_VLAN_CHALLENGED) {
-			pr_debug("found VLAN challenged slave - %s\n",
-				 slave->dev->name);
-			return 1;
-		}
-	}
-
-	pr_debug("no VLAN challenged slaves found\n");
-	return 0;
-}
-
-/**
  * bond_next_vlan - safely skip to the next item in the vlans list.
  * @bond: the bond we're working on
  * @curr: item we're advancing from
@@ -631,7 +603,8 @@ down:
 static int bond_update_speed_duplex(struct slave *slave)
 {
 	struct net_device *slave_dev = slave->dev;
-	struct ethtool_cmd etool;
+	struct ethtool_cmd etool = { .cmd = ETHTOOL_GSET };
+	u32 slave_speed;
 	int res;
 
 	/* Fake speed and duplex */
@@ -645,7 +618,8 @@ static int bond_update_speed_duplex(struct slave *slave)
 	if (res < 0)
 		return -1;
 
-	switch (etool.speed) {
+	slave_speed = ethtool_cmd_speed(&etool);
+	switch (slave_speed) {
 	case SPEED_10:
 	case SPEED_100:
 	case SPEED_1000:
@@ -663,7 +637,7 @@ static int bond_update_speed_duplex(struct slave *slave)
 		return -1;
 	}
 
-	slave->speed = etool.speed;
+	slave->speed = slave_speed;
 	slave->duplex = etool.duplex;
 
 	return 0;
@@ -1087,6 +1061,21 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
 	return bestslave;
 }
 
+static bool bond_should_notify_peers(struct bonding *bond)
+{
+	struct slave *slave = bond->curr_active_slave;
+
+	pr_debug("bond_should_notify_peers: bond %s slave %s\n",
+		 bond->dev->name, slave ? slave->dev->name : "NULL");
+
+	if (!slave || !bond->send_peer_notif ||
+	    test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
+		return false;
+
+	bond->send_peer_notif--;
+	return true;
+}
+
 /**
  * change_active_interface - change the active slave into the specified one
  * @bond: our bonding struct
@@ -1154,6 +1143,8 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 			bond_set_slave_inactive_flags(old_active);
 
 		if (new_active) {
+			bool should_notify_peers = false;
+
 			bond_set_slave_active_flags(new_active);
 
 			if (bond->params.fail_over_mac)
@@ -1161,17 +1152,19 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 						      old_active);
 
 			if (netif_running(bond->dev)) {
-				bond->send_grat_arp = bond->params.num_grat_arp;
-				bond_send_gratuitous_arp(bond);
-
-				bond->send_unsol_na = bond->params.num_unsol_na;
-				bond_send_unsolicited_na(bond);
+				bond->send_peer_notif =
+					bond->params.num_peer_notif;
+				should_notify_peers =
+					bond_should_notify_peers(bond);
 			}
 
 			write_unlock_bh(&bond->curr_slave_lock);
 			read_unlock(&bond->lock);
 
 			netdev_bonding_change(bond->dev, NETDEV_BONDING_FAILOVER);
+			if (should_notify_peers)
+				netdev_bonding_change(bond->dev,
+						      NETDEV_NOTIFY_PEERS);
 
 			read_lock(&bond->lock);
 			write_lock_bh(&bond->curr_slave_lock);
@@ -1387,52 +1380,68 @@ static int bond_sethwaddr(struct net_device *bond_dev,
 	return 0;
 }
 
-#define BOND_VLAN_FEATURES \
-	(NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
-	 NETIF_F_HW_VLAN_FILTER)
-
-/*
- * Compute the common dev->feature set available to all slaves.  Some
- * feature bits are managed elsewhere, so preserve those feature bits
- * on the master device.
- */
-static int bond_compute_features(struct bonding *bond)
+static u32 bond_fix_features(struct net_device *dev, u32 features)
 {
 	struct slave *slave;
-	struct net_device *bond_dev = bond->dev;
-	u32 features = bond_dev->features;
-	u32 vlan_features = 0;
-	unsigned short max_hard_header_len = max((u16)ETH_HLEN,
-						bond_dev->hard_header_len);
+	struct bonding *bond = netdev_priv(dev);
+	u32 mask;
 	int i;
 
-	features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
-	features |=  NETIF_F_GSO_MASK | NETIF_F_NO_CSUM;
+	read_lock(&bond->lock);
 
-	if (!bond->first_slave)
-		goto done;
+	if (!bond->first_slave) {
+		/* Disable adding VLANs to empty bond. But why? --mq */
+		features |= NETIF_F_VLAN_CHALLENGED;
+		goto out;
+	}
 
+	mask = features;
 	features &= ~NETIF_F_ONE_FOR_ALL;
+	features |= NETIF_F_ALL_FOR_ALL;
 
-	vlan_features = bond->first_slave->dev->vlan_features;
 	bond_for_each_slave(bond, slave, i) {
 		features = netdev_increment_features(features,
 						     slave->dev->features,
-						     NETIF_F_ONE_FOR_ALL);
+						     mask);
+	}
+
+out:
+	read_unlock(&bond->lock);
+	return features;
+}
+
+#define BOND_VLAN_FEATURES	(NETIF_F_ALL_TX_OFFLOADS | \
+				 NETIF_F_SOFT_FEATURES | \
+				 NETIF_F_LRO)
+
+static void bond_compute_features(struct bonding *bond)
+{
+	struct slave *slave;
+	struct net_device *bond_dev = bond->dev;
+	u32 vlan_features = BOND_VLAN_FEATURES;
+	unsigned short max_hard_header_len = ETH_HLEN;
+	int i;
+
+	read_lock(&bond->lock);
+
+	if (!bond->first_slave)
+		goto done;
+
+	bond_for_each_slave(bond, slave, i) {
 		vlan_features = netdev_increment_features(vlan_features,
-							slave->dev->vlan_features,
-							NETIF_F_ONE_FOR_ALL);
+			slave->dev->vlan_features, BOND_VLAN_FEATURES);
+
 		if (slave->dev->hard_header_len > max_hard_header_len)
 			max_hard_header_len = slave->dev->hard_header_len;
 	}
 
 done:
-	features |= (bond_dev->features & BOND_VLAN_FEATURES);
-	bond_dev->features = netdev_fix_features(bond_dev, features);
-	bond_dev->vlan_features = netdev_fix_features(bond_dev, vlan_features);
+	bond_dev->vlan_features = vlan_features;
 	bond_dev->hard_header_len = max_hard_header_len;
 
-	return 0;
+	read_unlock(&bond->lock);
+
+	netdev_change_features(bond_dev);
 }
 
 static void bond_setup_by_slave(struct net_device *bond_dev,
@@ -1452,27 +1461,17 @@ static void bond_setup_by_slave(struct net_device *bond_dev,
 }
 
 /* On bonding slaves other than the currently active slave, suppress
- * duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and
- * ARP on active-backup slaves with arp_validate enabled.
+ * duplicates except for alb non-mcast/bcast.
  */
 static bool bond_should_deliver_exact_match(struct sk_buff *skb,
 					    struct slave *slave,
 					    struct bonding *bond)
 {
 	if (bond_is_slave_inactive(slave)) {
-		if (slave_do_arp_validate(bond, slave) &&
-		    skb->protocol == __cpu_to_be16(ETH_P_ARP))
-			return false;
-
 		if (bond->params.mode == BOND_MODE_ALB &&
 		    skb->pkt_type != PACKET_BROADCAST &&
 		    skb->pkt_type != PACKET_MULTICAST)
-				return false;
-
-		if (bond->params.mode == BOND_MODE_8023AD &&
-		    skb->protocol == __cpu_to_be16(ETH_P_SLOW))
 			return false;
-
 		return true;
 	}
 	return false;
@@ -1496,6 +1495,15 @@ static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
 	if (bond->params.arp_interval)
 		slave->dev->last_rx = jiffies;
 
+	if (bond->recv_probe) {
+		struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
+
+		if (likely(nskb)) {
+			bond->recv_probe(nskb, bond, slave);
+			dev_kfree_skb(nskb);
+		}
+	}
+
 	if (bond_should_deliver_exact_match(skb, slave, bond)) {
 		return RX_HANDLER_EXACT;
 	}
@@ -1526,7 +1534,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	struct netdev_hw_addr *ha;
 	struct sockaddr addr;
 	int link_reporting;
-	int old_features = bond_dev->features;
 	int res = 0;
 
 	if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
@@ -1559,16 +1566,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 			pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
 				   bond_dev->name, slave_dev->name,
 				   slave_dev->name, bond_dev->name);
-			bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
 		}
 	} else {
 		pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
-		if (bond->slave_cnt == 0) {
-			/* First slave, and it is not VLAN challenged,
-			 * so remove the block of adding VLANs over the bond.
-			 */
-			bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
-		}
 	}
 
 	/*
@@ -1757,10 +1757,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	new_slave->delay = 0;
 	new_slave->link_failure_count = 0;
 
-	bond_compute_features(bond);
-
 	write_unlock_bh(&bond->lock);
 
+	bond_compute_features(bond);
+
 	read_lock(&bond->lock);
 
 	new_slave->last_arp_rx = jiffies;
@@ -1940,7 +1940,7 @@ err_free:
 	kfree(new_slave);
 
 err_undo_flags:
-	bond_dev->features = old_features;
+	bond_compute_features(bond);
 
 	return res;
 }
@@ -1961,6 +1961,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct slave *slave, *oldcurrent;
 	struct sockaddr addr;
+	u32 old_features = bond_dev->features;
 
 	/* slave is not a slave or master is not master of this slave */
 	if (!(slave_dev->flags & IFF_SLAVE) ||
@@ -2021,8 +2022,6 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	/* release the slave from its bond */
 	bond_detach_slave(bond, slave);
 
-	bond_compute_features(bond);
-
 	if (bond->primary_slave == slave)
 		bond->primary_slave = NULL;
 
@@ -2066,24 +2065,23 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		 */
 		memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
 
-		if (!bond->vlgrp) {
-			bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
-		} else {
+		if (bond->vlgrp) {
 			pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
 				   bond_dev->name, bond_dev->name);
 			pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
 				   bond_dev->name);
 		}
-	} else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
-		   !bond_has_challenged_slaves(bond)) {
-		pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
-			bond_dev->name, slave_dev->name, bond_dev->name);
-		bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
 	}
 
 	write_unlock_bh(&bond->lock);
 	unblock_netpoll_tx();
 
+	bond_compute_features(bond);
+	if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
+	    (old_features & NETIF_F_VLAN_CHALLENGED))
+		pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
+			bond_dev->name, slave_dev->name, bond_dev->name);
+
 	/* must do this from outside any spinlocks */
 	bond_destroy_slave_symlinks(bond_dev, slave_dev);
 
@@ -2201,8 +2199,6 @@ static int bond_release_all(struct net_device *bond_dev)
 			bond_alb_deinit_slave(bond, slave);
 		}
 
-		bond_compute_features(bond);
-
 		bond_destroy_slave_symlinks(bond_dev, slave_dev);
 		bond_del_vlans_from_slave(bond, slave_dev);
 
@@ -2251,9 +2247,7 @@ static int bond_release_all(struct net_device *bond_dev)
 	 */
 	memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
 
-	if (!bond->vlgrp) {
-		bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
-	} else {
+	if (bond->vlgrp) {
 		pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
 			   bond_dev->name, bond_dev->name);
 		pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
@@ -2264,6 +2258,9 @@ static int bond_release_all(struct net_device *bond_dev)
 
 out:
 	write_unlock_bh(&bond->lock);
+
+	bond_compute_features(bond);
+
 	return 0;
 }
 
@@ -2493,7 +2490,7 @@ static void bond_miimon_commit(struct bonding *bond)
 
 			bond_update_speed_duplex(slave);
 
-			pr_info("%s: link status definitely up for interface %s, %d Mbps %s duplex.\n",
+			pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
 				bond->dev->name, slave->dev->name,
 				slave->speed, slave->duplex ? "full" : "half");
 
@@ -2570,6 +2567,7 @@ void bond_mii_monitor(struct work_struct *work)
 {
 	struct bonding *bond = container_of(work, struct bonding,
 					    mii_work.work);
+	bool should_notify_peers = false;
 
 	read_lock(&bond->lock);
 	if (bond->kill_timers)
@@ -2578,17 +2576,7 @@ void bond_mii_monitor(struct work_struct *work)
 	if (bond->slave_cnt == 0)
 		goto re_arm;
 
-	if (bond->send_grat_arp) {
-		read_lock(&bond->curr_slave_lock);
-		bond_send_gratuitous_arp(bond);
-		read_unlock(&bond->curr_slave_lock);
-	}
-
-	if (bond->send_unsol_na) {
-		read_lock(&bond->curr_slave_lock);
-		bond_send_unsolicited_na(bond);
-		read_unlock(&bond->curr_slave_lock);
-	}
+	should_notify_peers = bond_should_notify_peers(bond);
 
 	if (bond_miimon_inspect(bond)) {
 		read_unlock(&bond->lock);
@@ -2608,6 +2596,12 @@ re_arm:
 				   msecs_to_jiffies(bond->params.miimon));
 out:
 	read_unlock(&bond->lock);
+
+	if (should_notify_peers) {
+		rtnl_lock();
+		netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
+		rtnl_unlock();
+	}
 }
 
 static __be32 bond_glean_dev_ip(struct net_device *dev)
@@ -2751,44 +2745,6 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 	}
 }
 
-/*
- * Kick out a gratuitous ARP for an IP on the bonding master plus one
- * for each VLAN above us.
- *
- * Caller must hold curr_slave_lock for read or better
- */
-static void bond_send_gratuitous_arp(struct bonding *bond)
-{
-	struct slave *slave = bond->curr_active_slave;
-	struct vlan_entry *vlan;
-	struct net_device *vlan_dev;
-
-	pr_debug("bond_send_grat_arp: bond %s slave %s\n",
-		 bond->dev->name, slave ? slave->dev->name : "NULL");
-
-	if (!slave || !bond->send_grat_arp ||
-	    test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
-		return;
-
-	bond->send_grat_arp--;
-
-	if (bond->master_ip) {
-		bond_arp_send(slave->dev, ARPOP_REPLY, bond->master_ip,
-				bond->master_ip, 0);
-	}
-
-	if (!bond->vlgrp)
-		return;
-
-	list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
-		vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
-		if (vlan->vlan_ip) {
-			bond_arp_send(slave->dev, ARPOP_REPLY, vlan->vlan_ip,
-				      vlan->vlan_ip, vlan->vlan_id);
-		}
-	}
-}
-
 static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
 {
 	int i;
@@ -2806,48 +2762,26 @@ static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32
 	}
 }
 
-static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
+static void bond_arp_rcv(struct sk_buff *skb, struct bonding *bond,
+			 struct slave *slave)
 {
 	struct arphdr *arp;
-	struct slave *slave;
-	struct bonding *bond;
 	unsigned char *arp_ptr;
 	__be32 sip, tip;
 
-	if (dev->priv_flags & IFF_802_1Q_VLAN) {
-		/*
-		 * When using VLANS and bonding, dev and oriv_dev may be
-		 * incorrect if the physical interface supports VLAN
-		 * acceleration.  With this change ARP validation now
-		 * works for hosts only reachable on the VLAN interface.
-		 */
-		dev = vlan_dev_real_dev(dev);
-		orig_dev = dev_get_by_index_rcu(dev_net(skb->dev),skb->skb_iif);
-	}
-
-	if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER))
-		goto out;
+	if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
+		return;
 
-	bond = netdev_priv(dev);
 	read_lock(&bond->lock);
 
-	pr_debug("bond_arp_rcv: bond %s skb->dev %s orig_dev %s\n",
-		 bond->dev->name, skb->dev ? skb->dev->name : "NULL",
-		 orig_dev ? orig_dev->name : "NULL");
-
-	slave = bond_get_slave_by_dev(bond, orig_dev);
-	if (!slave || !slave_do_arp_validate(bond, slave))
-		goto out_unlock;
-
-	skb = skb_share_check(skb, GFP_ATOMIC);
-	if (!skb)
-		goto out_unlock;
+	pr_debug("bond_arp_rcv: bond %s skb->dev %s\n",
+		 bond->dev->name, skb->dev->name);
 
-	if (!pskb_may_pull(skb, arp_hdr_len(dev)))
+	if (!pskb_may_pull(skb, arp_hdr_len(bond->dev)))
 		goto out_unlock;
 
 	arp = arp_hdr(skb);
-	if (arp->ar_hln != dev->addr_len ||
+	if (arp->ar_hln != bond->dev->addr_len ||
 	    skb->pkt_type == PACKET_OTHERHOST ||
 	    skb->pkt_type == PACKET_LOOPBACK ||
 	    arp->ar_hrd != htons(ARPHRD_ETHER) ||
@@ -2856,9 +2790,9 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack
 		goto out_unlock;
 
 	arp_ptr = (unsigned char *)(arp + 1);
-	arp_ptr += dev->addr_len;
+	arp_ptr += bond->dev->addr_len;
 	memcpy(&sip, arp_ptr, 4);
-	arp_ptr += 4 + dev->addr_len;
+	arp_ptr += 4 + bond->dev->addr_len;
 	memcpy(&tip, arp_ptr, 4);
 
 	pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
@@ -2881,9 +2815,6 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack
 
 out_unlock:
 	read_unlock(&bond->lock);
-out:
-	dev_kfree_skb(skb);
-	return NET_RX_SUCCESS;
 }
 
 /*
@@ -3243,6 +3174,7 @@ void bond_activebackup_arp_mon(struct work_struct *work)
 {
 	struct bonding *bond = container_of(work, struct bonding,
 					    arp_work.work);
+	bool should_notify_peers = false;
 	int delta_in_ticks;
 
 	read_lock(&bond->lock);
@@ -3255,17 +3187,7 @@ void bond_activebackup_arp_mon(struct work_struct *work)
 	if (bond->slave_cnt == 0)
 		goto re_arm;
 
-	if (bond->send_grat_arp) {
-		read_lock(&bond->curr_slave_lock);
-		bond_send_gratuitous_arp(bond);
-		read_unlock(&bond->curr_slave_lock);
-	}
-
-	if (bond->send_unsol_na) {
-		read_lock(&bond->curr_slave_lock);
-		bond_send_unsolicited_na(bond);
-		read_unlock(&bond->curr_slave_lock);
-	}
+	should_notify_peers = bond_should_notify_peers(bond);
 
 	if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
 		read_unlock(&bond->lock);
@@ -3286,6 +3208,12 @@ re_arm:
 		queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
 out:
 	read_unlock(&bond->lock);
+
+	if (should_notify_peers) {
+		rtnl_lock();
+		netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS);
+		rtnl_unlock();
+	}
 }
 
 /*-------------------------- netdev event handling --------------------------*/
@@ -3339,8 +3267,8 @@ static int bond_slave_netdev_event(unsigned long event,
 
 			slave = bond_get_slave_by_dev(bond, slave_dev);
 			if (slave) {
-				u16 old_speed = slave->speed;
-				u16 old_duplex = slave->duplex;
+				u32 old_speed = slave->speed;
+				u8  old_duplex = slave->duplex;
 
 				bond_update_speed_duplex(slave);
 
@@ -3482,48 +3410,6 @@ static struct notifier_block bond_inetaddr_notifier = {
 	.notifier_call = bond_inetaddr_event,
 };
 
-/*-------------------------- Packet type handling ---------------------------*/
-
-/* register to receive lacpdus on a bond */
-static void bond_register_lacpdu(struct bonding *bond)
-{
-	struct packet_type *pk_type = &(BOND_AD_INFO(bond).ad_pkt_type);
-
-	/* initialize packet type */
-	pk_type->type = PKT_TYPE_LACPDU;
-	pk_type->dev = bond->dev;
-	pk_type->func = bond_3ad_lacpdu_recv;
-
-	dev_add_pack(pk_type);
-}
-
-/* unregister to receive lacpdus on a bond */
-static void bond_unregister_lacpdu(struct bonding *bond)
-{
-	dev_remove_pack(&(BOND_AD_INFO(bond).ad_pkt_type));
-}
-
-void bond_register_arp(struct bonding *bond)
-{
-	struct packet_type *pt = &bond->arp_mon_pt;
-
-	if (pt->type)
-		return;
-
-	pt->type = htons(ETH_P_ARP);
-	pt->dev = bond->dev;
-	pt->func = bond_arp_rcv;
-	dev_add_pack(pt);
-}
-
-void bond_unregister_arp(struct bonding *bond)
-{
-	struct packet_type *pt = &bond->arp_mon_pt;
-
-	dev_remove_pack(pt);
-	pt->type = 0;
-}
-
 /*---------------------------- Hashing Policies -----------------------------*/
 
 /*
@@ -3617,14 +3503,14 @@ static int bond_open(struct net_device *bond_dev)
 
 		queue_delayed_work(bond->wq, &bond->arp_work, 0);
 		if (bond->params.arp_validate)
-			bond_register_arp(bond);
+			bond->recv_probe = bond_arp_rcv;
 	}
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
 		queue_delayed_work(bond->wq, &bond->ad_work, 0);
 		/* register to receive LACPDUs */
-		bond_register_lacpdu(bond);
+		bond->recv_probe = bond_3ad_lacpdu_recv;
 		bond_3ad_initiate_agg_selection(bond, 1);
 	}
 
@@ -3635,18 +3521,9 @@ static int bond_close(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 
-	if (bond->params.mode == BOND_MODE_8023AD) {
-		/* Unregister the receive of LACPDUs */
-		bond_unregister_lacpdu(bond);
-	}
-
-	if (bond->params.arp_validate)
-		bond_unregister_arp(bond);
-
 	write_lock_bh(&bond->lock);
 
-	bond->send_grat_arp = 0;
-	bond->send_unsol_na = 0;
+	bond->send_peer_notif = 0;
 
 	/* signal timers not to re-arm */
 	bond->kill_timers = 1;
@@ -3682,6 +3559,7 @@ static int bond_close(struct net_device *bond_dev)
 		 */
 		bond_alb_deinitialize(bond);
 	}
+	bond->recv_probe = NULL;
 
 	return 0;
 }
@@ -4105,10 +3983,6 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev
 	int i, slave_no, res = 1;
 	struct iphdr *iph = ip_hdr(skb);
 
-	read_lock(&bond->lock);
-
-	if (!BOND_IS_OK(bond))
-		goto out;
 	/*
 	 * Start with the curr_active_slave that joined the bond as the
 	 * default for sending IGMP traffic.  For failover purposes one
@@ -4155,7 +4029,7 @@ out:
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
 	}
-	read_unlock(&bond->lock);
+
 	return NETDEV_TX_OK;
 }
 
@@ -4169,24 +4043,18 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d
 	struct bonding *bond = netdev_priv(bond_dev);
 	int res = 1;
 
-	read_lock(&bond->lock);
 	read_lock(&bond->curr_slave_lock);
 
-	if (!BOND_IS_OK(bond))
-		goto out;
-
-	if (!bond->curr_active_slave)
-		goto out;
+	if (bond->curr_active_slave)
+		res = bond_dev_queue_xmit(bond, skb,
+			bond->curr_active_slave->dev);
 
-	res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev);
-
-out:
 	if (res)
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
 
 	read_unlock(&bond->curr_slave_lock);
-	read_unlock(&bond->lock);
+
 	return NETDEV_TX_OK;
 }
 
@@ -4203,11 +4071,6 @@ static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
 	int i;
 	int res = 1;
 
-	read_lock(&bond->lock);
-
-	if (!BOND_IS_OK(bond))
-		goto out;
-
 	slave_no = bond->xmit_hash_policy(skb, bond->slave_cnt);
 
 	bond_for_each_slave(bond, slave, i) {
@@ -4227,12 +4090,11 @@ static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
 		}
 	}
 
-out:
 	if (res) {
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
 	}
-	read_unlock(&bond->lock);
+
 	return NETDEV_TX_OK;
 }
 
@@ -4247,11 +4109,6 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 	int i;
 	int res = 1;
 
-	read_lock(&bond->lock);
-
-	if (!BOND_IS_OK(bond))
-		goto out;
-
 	read_lock(&bond->curr_slave_lock);
 	start_at = bond->curr_active_slave;
 	read_unlock(&bond->curr_slave_lock);
@@ -4290,7 +4147,6 @@ out:
 		dev_kfree_skb(skb);
 
 	/* frame sent to all suitable interfaces */
-	read_unlock(&bond->lock);
 	return NETDEV_TX_OK;
 }
 
@@ -4322,10 +4178,8 @@ static inline int bond_slave_override(struct bonding *bond,
 	struct slave *slave = NULL;
 	struct slave *check_slave;
 
-	read_lock(&bond->lock);
-
-	if (!BOND_IS_OK(bond) || !skb->queue_mapping)
-		goto out;
+	if (!skb->queue_mapping)
+		return 1;
 
 	/* Find out if any slaves have the same mapping as this skb. */
 	bond_for_each_slave(bond, check_slave, i) {
@@ -4341,8 +4195,6 @@ static inline int bond_slave_override(struct bonding *bond,
 		res = bond_dev_queue_xmit(bond, skb, slave->dev);
 	}
 
-out:
-	read_unlock(&bond->lock);
 	return res;
 }
 
@@ -4357,24 +4209,17 @@ static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
 	u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
 
 	if (unlikely(txq >= dev->real_num_tx_queues)) {
-		do
+		do {
 			txq -= dev->real_num_tx_queues;
-		while (txq >= dev->real_num_tx_queues);
+		} while (txq >= dev->real_num_tx_queues);
 	}
 	return txq;
 }
 
-static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bonding *bond = netdev_priv(dev);
 
-	/*
-	 * If we risk deadlock from transmitting this in the
-	 * netpoll path, tell netpoll to queue the frame for later tx
-	 */
-	if (is_netpoll_tx_blocked(dev))
-		return NETDEV_TX_BUSY;
-
 	if (TX_QUEUE_OVERRIDE(bond->params.mode)) {
 		if (!bond_slave_override(bond, skb))
 			return NETDEV_TX_OK;
@@ -4404,6 +4249,29 @@ static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 }
 
+static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct bonding *bond = netdev_priv(dev);
+	netdev_tx_t ret = NETDEV_TX_OK;
+
+	/*
+	 * If we risk deadlock from transmitting this in the
+	 * netpoll path, tell netpoll to queue the frame for later tx
+	 */
+	if (is_netpoll_tx_blocked(dev))
+		return NETDEV_TX_BUSY;
+
+	read_lock(&bond->lock);
+
+	if (bond->slave_cnt)
+		ret = __bond_start_xmit(skb, dev);
+	else
+		dev_kfree_skb(skb);
+
+	read_unlock(&bond->lock);
+
+	return ret;
+}
 
 /*
  * set bond mode specific net device operations
@@ -4448,11 +4316,6 @@ static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
 static const struct ethtool_ops bond_ethtool_ops = {
 	.get_drvinfo		= bond_ethtool_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.get_tso		= ethtool_op_get_tso,
-	.get_ufo		= ethtool_op_get_ufo,
-	.get_flags		= ethtool_op_get_flags,
 };
 
 static const struct net_device_ops bond_netdev_ops = {
@@ -4478,6 +4341,7 @@ static const struct net_device_ops bond_netdev_ops = {
 #endif
 	.ndo_add_slave		= bond_enslave,
 	.ndo_del_slave		= bond_release,
+	.ndo_fix_features	= bond_fix_features,
 };
 
 static void bond_destructor(struct net_device *bond_dev)
@@ -4533,14 +4397,14 @@ static void bond_setup(struct net_device *bond_dev)
 	 * when there are slaves that are not hw accel
 	 * capable
 	 */
-	bond_dev->features |= (NETIF_F_HW_VLAN_TX |
-			       NETIF_F_HW_VLAN_RX |
-			       NETIF_F_HW_VLAN_FILTER);
 
-	/* By default, we enable GRO on bonding devices.
-	 * Actual support requires lowlevel drivers are GRO ready.
-	 */
-	bond_dev->features |= NETIF_F_GRO;
+	bond_dev->hw_features = BOND_VLAN_FEATURES |
+				NETIF_F_HW_VLAN_TX |
+				NETIF_F_HW_VLAN_RX |
+				NETIF_F_HW_VLAN_FILTER;
+
+	bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM);
+	bond_dev->features |= bond_dev->hw_features;
 }
 
 static void bond_work_cancel_all(struct bonding *bond)
@@ -4724,16 +4588,10 @@ static int bond_check_params(struct bond_params *params)
 		use_carrier = 1;
 	}
 
-	if (num_grat_arp < 0 || num_grat_arp > 255) {
-		pr_warning("Warning: num_grat_arp (%d) not in range 0-255 so it was reset to 1\n",
-			   num_grat_arp);
-		num_grat_arp = 1;
-	}
-
-	if (num_unsol_na < 0 || num_unsol_na > 255) {
-		pr_warning("Warning: num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
-			   num_unsol_na);
-		num_unsol_na = 1;
+	if (num_peer_notif < 0 || num_peer_notif > 255) {
+		pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
+			   num_peer_notif);
+		num_peer_notif = 1;
 	}
 
 	/* reset values for 802.3ad */
@@ -4925,8 +4783,7 @@ static int bond_check_params(struct bond_params *params)
 	params->mode = bond_mode;
 	params->xmit_policy = xmit_hashtype;
 	params->miimon = miimon;
-	params->num_grat_arp = num_grat_arp;
-	params->num_unsol_na = num_unsol_na;
+	params->num_peer_notif = num_peer_notif;
 	params->arp_interval = arp_interval;
 	params->arp_validate = arp_validate_value;
 	params->updelay = updelay;
@@ -5025,8 +4882,9 @@ int bond_create(struct net *net, const char *name)
 
 	rtnl_lock();
 
-	bond_dev = alloc_netdev_mq(sizeof(struct bonding), name ? name : "",
-				bond_setup, tx_queues);
+	bond_dev = alloc_netdev_mq(sizeof(struct bonding),
+				   name ? name : "bond%d",
+				   bond_setup, tx_queues);
 	if (!bond_dev) {
 		pr_err("%s: eek! can't alloc netdev!\n", name);
 		rtnl_unlock();
@@ -5036,26 +4894,10 @@ int bond_create(struct net *net, const char *name)
 	dev_net_set(bond_dev, net);
 	bond_dev->rtnl_link_ops = &bond_link_ops;
 
-	if (!name) {
-		res = dev_alloc_name(bond_dev, "bond%d");
-		if (res < 0)
-			goto out;
-	} else {
-		/*
-		 * If we're given a name to register
-		 * we need to ensure that its not already
-		 * registered
-		 */
-		res = -EEXIST;
-		if (__dev_get_by_name(net, name) != NULL)
-			goto out;
-	}
-
 	res = register_netdevice(bond_dev);
 
 	netif_carrier_off(bond_dev);
 
-out:
 	rtnl_unlock();
 	if (res < 0)
 		bond_destructor(bond_dev);
@@ -5121,7 +4963,6 @@ static int __init bonding_init(void)
 
 	register_netdevice_notifier(&bond_netdev_notifier);
 	register_inetaddr_notifier(&bond_inetaddr_notifier);
-	bond_register_ipv6_notifier();
 out:
 	return res;
 err:
@@ -5136,7 +4977,6 @@ static void __exit bonding_exit(void)
 {
 	unregister_netdevice_notifier(&bond_netdev_notifier);
 	unregister_inetaddr_notifier(&bond_inetaddr_notifier);
-	bond_unregister_ipv6_notifier();
 
 	bond_destroy_sysfs();
 	bond_destroy_debugfs();
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index c32ff55a34c..c97307ddd1c 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -4,8 +4,6 @@
 #include "bonding.h"
 
 
-extern const char *bond_mode_name(int mode);
-
 static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
 	__acquires(RCU)
 	__acquires(&bond->lock)
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index de87aea6d01..4059bfc73db 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -422,11 +422,6 @@ static ssize_t bonding_store_arp_validate(struct device *d,
 		bond->dev->name, arp_validate_tbl[new_value].modename,
 		new_value);
 
-	if (!bond->params.arp_validate && new_value)
-		bond_register_arp(bond);
-	else if (bond->params.arp_validate && !new_value)
-		bond_unregister_arp(bond);
-
 	bond->params.arp_validate = new_value;
 
 	return count;
@@ -874,82 +869,28 @@ static DEVICE_ATTR(ad_select, S_IRUGO | S_IWUSR,
 		   bonding_show_ad_select, bonding_store_ad_select);
 
 /*
- * Show and set the number of grat ARP to send after a failover event.
+ * Show and set the number of peer notifications to send after a failover event.
  */
-static ssize_t bonding_show_n_grat_arp(struct device *d,
-				   struct device_attribute *attr,
-				   char *buf)
+static ssize_t bonding_show_num_peer_notif(struct device *d,
+					   struct device_attribute *attr,
+					   char *buf)
 {
 	struct bonding *bond = to_bond(d);
-
-	return sprintf(buf, "%d\n", bond->params.num_grat_arp);
+	return sprintf(buf, "%d\n", bond->params.num_peer_notif);
 }
 
-static ssize_t bonding_store_n_grat_arp(struct device *d,
-				    struct device_attribute *attr,
-				    const char *buf, size_t count)
+static ssize_t bonding_store_num_peer_notif(struct device *d,
+					    struct device_attribute *attr,
+					    const char *buf, size_t count)
 {
-	int new_value, ret = count;
 	struct bonding *bond = to_bond(d);
-
-	if (sscanf(buf, "%d", &new_value) != 1) {
-		pr_err("%s: no num_grat_arp value specified.\n",
-		       bond->dev->name);
-		ret = -EINVAL;
-		goto out;
-	}
-	if (new_value < 0 || new_value > 255) {
-		pr_err("%s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
-		       bond->dev->name, new_value);
-		ret = -EINVAL;
-		goto out;
-	} else {
-		bond->params.num_grat_arp = new_value;
-	}
-out:
-	return ret;
+	int err = kstrtou8(buf, 10, &bond->params.num_peer_notif);
+	return err ? err : count;
 }
 static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR,
-		   bonding_show_n_grat_arp, bonding_store_n_grat_arp);
-
-/*
- * Show and set the number of unsolicited NA's to send after a failover event.
- */
-static ssize_t bonding_show_n_unsol_na(struct device *d,
-				       struct device_attribute *attr,
-				       char *buf)
-{
-	struct bonding *bond = to_bond(d);
-
-	return sprintf(buf, "%d\n", bond->params.num_unsol_na);
-}
-
-static ssize_t bonding_store_n_unsol_na(struct device *d,
-					struct device_attribute *attr,
-					const char *buf, size_t count)
-{
-	int new_value, ret = count;
-	struct bonding *bond = to_bond(d);
-
-	if (sscanf(buf, "%d", &new_value) != 1) {
-		pr_err("%s: no num_unsol_na value specified.\n",
-		       bond->dev->name);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (new_value < 0 || new_value > 255) {
-		pr_err("%s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n",
-		       bond->dev->name, new_value);
-		ret = -EINVAL;
-		goto out;
-	} else
-		bond->params.num_unsol_na = new_value;
-out:
-	return ret;
-}
+		   bonding_show_num_peer_notif, bonding_store_num_peer_notif);
 static DEVICE_ATTR(num_unsol_na, S_IRUGO | S_IWUSR,
-		   bonding_show_n_unsol_na, bonding_store_n_unsol_na);
+		   bonding_show_num_peer_notif, bonding_store_num_peer_notif);
 
 /*
  * Show and set the MII monitor interval.  There are two tricky bits
@@ -1001,7 +942,6 @@ static ssize_t bonding_store_miimon(struct device *d,
 				bond->dev->name);
 			bond->params.arp_interval = 0;
 			if (bond->params.arp_validate) {
-				bond_unregister_arp(bond);
 				bond->params.arp_validate =
 					BOND_ARP_VALIDATE_NONE;
 			}
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 90736cb4d97..ea1d005be92 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -24,8 +24,8 @@
 #include "bond_3ad.h"
 #include "bond_alb.h"
 
-#define DRV_VERSION	"3.7.0"
-#define DRV_RELDATE	"June 2, 2010"
+#define DRV_VERSION	"3.7.1"
+#define DRV_RELDATE	"April 27, 2011"
 #define DRV_NAME	"bonding"
 #define DRV_DESCRIPTION	"Ethernet Channel Bonding Driver"
 
@@ -39,16 +39,6 @@
 	       netif_carrier_ok(dev))
 
 /*
- * Checks whether bond is ready for transmit.
- *
- * Caller must hold bond->lock
- */
-#define BOND_IS_OK(bond)			     \
-		   (((bond)->dev->flags & IFF_UP) && \
-		    netif_running((bond)->dev)	  && \
-		    ((bond)->slave_cnt > 0))
-
-/*
  * Checks whether slave is ready for transmit.
  */
 #define SLAVE_IS_OK(slave)			        \
@@ -149,8 +139,7 @@ struct bond_params {
 	int mode;
 	int xmit_policy;
 	int miimon;
-	int num_grat_arp;
-	int num_unsol_na;
+	u8 num_peer_notif;
 	int arp_interval;
 	int arp_validate;
 	int use_carrier;
@@ -178,9 +167,6 @@ struct vlan_entry {
 	struct list_head vlan_list;
 	__be32 vlan_ip;
 	unsigned short vlan_id;
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-	struct in6_addr vlan_ipv6;
-#endif
 };
 
 struct slave {
@@ -196,12 +182,12 @@ struct slave {
 	u8     backup:1,   /* indicates backup slave. Value corresponds with
 			      BOND_STATE_ACTIVE and BOND_STATE_BACKUP */
 	       inactive:1; /* indicates inactive slave */
+	u8     duplex;
 	u32    original_mtu;
 	u32    link_failure_count;
-	u8     perm_hwaddr[ETH_ALEN];
-	u16    speed;
-	u8     duplex;
+	u32    speed;
 	u16    queue_id;
+	u8     perm_hwaddr[ETH_ALEN];
 	struct ad_slave_info ad_info; /* HUGE - better to dynamically alloc */
 	struct tlb_slave_info tlb_info;
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -231,11 +217,12 @@ struct bonding {
 	struct   slave *primary_slave;
 	bool     force_primary;
 	s32      slave_cnt; /* never change this value outside the attach/detach wrappers */
+	void     (*recv_probe)(struct sk_buff *, struct bonding *,
+			       struct slave *);
 	rwlock_t lock;
 	rwlock_t curr_slave_lock;
 	s8       kill_timers;
-	s8	 send_grat_arp;
-	s8	 send_unsol_na;
+	u8	 send_peer_notif;
 	s8	 setup_by_slave;
 	s8       igmp_retrans;
 #ifdef CONFIG_PROC_FS
@@ -260,9 +247,6 @@ struct bonding {
 	struct   delayed_work alb_work;
 	struct   delayed_work ad_work;
 	struct   delayed_work mcast_work;
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-	struct   in6_addr master_ipv6;
-#endif
 #ifdef CONFIG_DEBUG_FS
 	/* debugging suport via debugfs */
 	struct	 dentry *debug_dir;
@@ -409,13 +393,12 @@ void bond_set_mode_ops(struct bonding *bond, int mode);
 int bond_parse_parm(const char *mode_arg, const struct bond_parm_tbl *tbl);
 void bond_select_active_slave(struct bonding *bond);
 void bond_change_active_slave(struct bonding *bond, struct slave *new_active);
-void bond_register_arp(struct bonding *);
-void bond_unregister_arp(struct bonding *);
 void bond_create_debugfs(void);
 void bond_destroy_debugfs(void);
 void bond_debug_register(struct bonding *bond);
 void bond_debug_unregister(struct bonding *bond);
 void bond_debug_reregister(struct bonding *bond);
+const char *bond_mode_name(int mode);
 
 struct bond_net {
 	struct net *		net;	/* Associated network namespace */
@@ -459,23 +442,4 @@ extern const struct bond_parm_tbl fail_over_mac_tbl[];
 extern const struct bond_parm_tbl pri_reselect_tbl[];
 extern struct bond_parm_tbl ad_select_tbl[];
 
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-void bond_send_unsolicited_na(struct bonding *bond);
-void bond_register_ipv6_notifier(void);
-void bond_unregister_ipv6_notifier(void);
-#else
-static inline void bond_send_unsolicited_na(struct bonding *bond)
-{
-	return;
-}
-static inline void bond_register_ipv6_notifier(void)
-{
-	return;
-}
-static inline void bond_unregister_ipv6_notifier(void)
-{
-	return;
-}
-#endif
-
 #endif /* _LINUX_BONDING_H */
diff --git a/drivers/net/caif/caif_shmcore.c b/drivers/net/caif/caif_shmcore.c
index 80511167f35..731aa119377 100644
--- a/drivers/net/caif/caif_shmcore.c
+++ b/drivers/net/caif/caif_shmcore.c
@@ -591,7 +591,7 @@ int caif_shmcore_probe(struct shmdev_layer *pshm_dev)
 			(NR_TX_BUF * TX_BUF_SZ + NR_RX_BUF * RX_BUF_SZ)) {
 
 		pr_warn("ERROR, Amount of available"
-				" Phys. SHM cannot accomodate current SHM "
+				" Phys. SHM cannot accommodate current SHM "
 				"driver configuration, Bailing out ...\n");
 		free_netdev(pshm_dev->pshm_netdev);
 		return -ENOMEM;
diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c
index 20da1996d35..57e63937381 100644
--- a/drivers/net/caif/caif_spi.c
+++ b/drivers/net/caif/caif_spi.c
@@ -397,7 +397,7 @@ int cfspi_xmitlen(struct cfspi *cfspi)
 	int pkts = 0;
 
 	/*
-	 * Decommit previously commited frames.
+	 * Decommit previously committed frames.
 	 * skb_queue_splice_tail(&cfspi->chead,&cfspi->qhead)
 	 */
 	while (skb_peek(&cfspi->chead)) {
diff --git a/drivers/net/caif/caif_spi_slave.c b/drivers/net/caif/caif_spi_slave.c
index 1b9943a4eda..b009e03cda9 100644
--- a/drivers/net/caif/caif_spi_slave.c
+++ b/drivers/net/caif/caif_spi_slave.c
@@ -98,7 +98,7 @@ void cfspi_xfer(struct work_struct *work)
 
 			cfspi_dbg_state(cfspi, CFSPI_STATE_FETCH_PKT);
 
-			/* Copy commited SPI frames after the SPI indication. */
+			/* Copy committed SPI frames after the SPI indication. */
 			ptr = (u8 *) cfspi->xfer.va_tx;
 			ptr += SPI_IND_SZ;
 			len = cfspi_xmitfrm(cfspi, ptr, cfspi->tx_cpck_len);
@@ -158,7 +158,7 @@ void cfspi_xfer(struct work_struct *work)
 
 		cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_ACTIVE);
 
-		/* Signal that we are ready to recieve data. */
+		/* Signal that we are ready to receive data. */
 		cfspi->dev->sig_xfer(true, cfspi->dev);
 
 		cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_XFER_DONE);
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 57d2ffbbb43..74efb5a2ad4 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -416,7 +416,7 @@ static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	stats->tx_bytes += cf->can_dlc;
 
-	/* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
+	/* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */
 	can_put_echo_skb(skb, dev, mb - AT91_MB_TX_FIRST);
 
 	/*
@@ -782,7 +782,7 @@ static void at91_irq_tx(struct net_device *dev, u32 reg_sr)
 		reg_msr = at91_read(priv, AT91_MSR(mb));
 		if (likely(reg_msr & AT91_MSR_MRDY &&
 			   ~reg_msr & AT91_MSR_MABT)) {
-			/* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
+			/* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */
 			can_get_echo_skb(dev, mb - AT91_MB_TX_FIRST);
 			dev->stats.tx_packets++;
 		}
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 31552959aed..7e5cc0bd913 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -813,7 +813,7 @@ static int c_can_handle_state_change(struct net_device *dev,
 	struct sk_buff *skb;
 	struct can_berr_counter bec;
 
-	/* propogate the error condition to the CAN stack */
+	/* propagate the error condition to the CAN stack */
 	skb = alloc_can_err_skb(dev, &cf);
 	if (unlikely(!skb))
 		return 0;
@@ -887,7 +887,7 @@ static int c_can_handle_bus_err(struct net_device *dev,
 	if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR)
 		return 0;
 
-	/* propogate the error condition to the CAN stack */
+	/* propagate the error condition to the CAN stack */
 	skb = alloc_can_err_skb(dev, &cf);
 	if (unlikely(!skb))
 		return 0;
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 102b16c6cc9..587fba48cdd 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -274,7 +274,7 @@ static inline void ican3_set_page(struct ican3_dev *mod, unsigned int page)
  */
 
 /*
- * Recieve a message from the ICAN3 "old-style" firmware interface
+ * Receive a message from the ICAN3 "old-style" firmware interface
  *
  * LOCKING: must hold mod->lock
  *
@@ -1050,7 +1050,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
 		complete(&mod->termination_comp);
 		break;
 	default:
-		dev_err(mod->dev, "recieved an unknown inquiry response\n");
+		dev_err(mod->dev, "received an unknown inquiry response\n");
 		break;
 	}
 }
@@ -1058,7 +1058,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
 static void ican3_handle_unknown_message(struct ican3_dev *mod,
 					struct ican3_msg *msg)
 {
-	dev_warn(mod->dev, "recieved unknown message: spec 0x%.2x length %d\n",
+	dev_warn(mod->dev, "received unknown message: spec 0x%.2x length %d\n",
 			   msg->spec, le16_to_cpu(msg->len));
 }
 
@@ -1113,7 +1113,7 @@ static bool ican3_txok(struct ican3_dev *mod)
 }
 
 /*
- * Recieve one CAN frame from the hardware
+ * Receive one CAN frame from the hardware
  *
  * CONTEXT: must be called from user context
  */
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 7513c4523ac..330140ee266 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -931,7 +931,8 @@ static int mcp251x_open(struct net_device *net)
 	priv->tx_len = 0;
 
 	ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist,
-			  IRQF_TRIGGER_FALLING, DEVICE_NAME, priv);
+		  pdata->irq_flags ? pdata->irq_flags : IRQF_TRIGGER_FALLING,
+		  DEVICE_NAME, priv);
 	if (ret) {
 		dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
 		if (pdata->transceiver_enable)
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index c0a1bc5b143..5fedc337556 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -247,8 +247,10 @@ static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
 }
 #endif /* CONFIG_PPC_MPC512x */
 
+static struct of_device_id mpc5xxx_can_table[];
 static int __devinit mpc5xxx_can_probe(struct platform_device *ofdev)
 {
+	const struct of_device_id *match;
 	struct mpc5xxx_can_data *data;
 	struct device_node *np = ofdev->dev.of_node;
 	struct net_device *dev;
@@ -258,9 +260,10 @@ static int __devinit mpc5xxx_can_probe(struct platform_device *ofdev)
 	int irq, mscan_clksrc = 0;
 	int err = -ENOMEM;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(mpc5xxx_can_table, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
-	data = (struct mpc5xxx_can_data *)of_dev->dev.of_match->data;
+	data = match->data;
 
 	base = of_iomap(np, 0);
 	if (!base) {
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 74cd880c7e0..92feac68b66 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -246,7 +246,7 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		out_be16(&regs->tx.idr3_2, can_id);
 
 		can_id >>= 16;
-		/* EFF_FLAGS are inbetween the IDs :( */
+		/* EFF_FLAGS are between the IDs :( */
 		can_id = (can_id & 0x7) | ((can_id << 2) & 0xffe0)
 			 | MSCAN_EFF_FLAGS;
 	} else {
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 0a8de01d52f..f501bba1fc6 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -346,10 +346,10 @@ static void sja1000_rx(struct net_device *dev)
 		    | (priv->read_reg(priv, REG_ID2) >> 5);
 	}
 
+	cf->can_dlc = get_can_dlc(fi & 0x0F);
 	if (fi & FI_RTR) {
 		id |= CAN_RTR_FLAG;
 	} else {
-		cf->can_dlc = get_can_dlc(fi & 0x0F);
 		for (i = 0; i < cf->can_dlc; i++)
 			cf->data[i] = priv->read_reg(priv, dreg++);
 	}
@@ -425,7 +425,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 			cf->data[3] = ecc & ECC_SEG;
 			break;
 		}
-		/* Error occured during transmission? */
+		/* Error occurred during transmission? */
 		if ((ecc & ECC_DIR) == 0)
 			cf->data[2] |= CAN_ERR_PROT_TX;
 	}
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index b423965a78d..1b49df6b247 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -583,7 +583,9 @@ static int slcan_open(struct tty_struct *tty)
 	/* Done.  We have linked the TTY line to a channel. */
 	rtnl_unlock();
 	tty->receive_room = 65536;	/* We don't flow control */
-	return sl->dev->base_addr;
+
+	/* TTY layer expects 0 on success */
+	return 0;
 
 err_free_chan:
 	sl->tty = NULL;
diff --git a/drivers/net/can/softing/softing.h b/drivers/net/can/softing/softing.h
index 7ec9f4db3d5..afd7d85b691 100644
--- a/drivers/net/can/softing/softing.h
+++ b/drivers/net/can/softing/softing.h
@@ -22,7 +22,7 @@ struct softing_priv {
 	struct softing *card;
 	struct {
 		int pending;
-		/* variables wich hold the circular buffer */
+		/* variables which hold the circular buffer */
 		int echo_put;
 		int echo_get;
 	} tx;
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index aeea9f9ff6e..7a70709d560 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -218,7 +218,7 @@ static int softing_handle_1(struct softing *card)
 	ptr = buf;
 	cmd = *ptr++;
 	if (cmd == 0xff)
-		/* not quite usefull, probably the card has got out */
+		/* not quite useful, probably the card has got out */
 		return 0;
 	netdev = card->net[0];
 	if (cmd & CMD_BUS2)
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 4d07f1ee716..f7bbde9eb2c 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -663,7 +663,7 @@ static int ti_hecc_error(struct net_device *ndev, int int_status,
 	struct can_frame *cf;
 	struct sk_buff *skb;
 
-	/* propogate the error condition to the can stack */
+	/* propagate the error condition to the can stack */
 	skb = alloc_can_err_skb(ndev, &cf);
 	if (!skb) {
 		if (printk_ratelimit())
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index e75f1a87697..a72c7bfb409 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -386,7 +386,7 @@ static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
 			break;
 		}
 
-		/* Error occured during transmission? */
+		/* Error occurred during transmission? */
 		if ((ecc & SJA1000_ECC_DIR) == 0)
 			cf->data[2] |= CAN_ERR_PROT_TX;
 
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c
index dc53c831ea9..eb8b0e60028 100644
--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -284,7 +284,7 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
 				break;
 			}
 
-			/* Error occured during transmission? */
+			/* Error occurred during transmission? */
 			if (!(ecc & SJA1000_ECC_DIR))
 				cf->data[2] |= CAN_ERR_PROT_TX;
 
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 3437613f045..22ce03e55b8 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -51,7 +51,7 @@
  * TX has 4 queues. currently these queues are used in a round-robin
  * fashion for load balancing. They can also be used for QoS. for that
  * to work, however, QoS information needs to be exposed down to the driver
- * level so that subqueues get targetted to particular transmit rings.
+ * level so that subqueues get targeted to particular transmit rings.
  * alternatively, the queues can be configured via use of the all-purpose
  * ioctl.
  *
@@ -709,10 +709,11 @@ static void cas_begin_auto_negotiation(struct cas *cp, struct ethtool_cmd *ep)
 	if (ep->autoneg == AUTONEG_ENABLE)
 		cp->link_cntl = BMCR_ANENABLE;
 	else {
+		u32 speed = ethtool_cmd_speed(ep);
 		cp->link_cntl = 0;
-		if (ep->speed == SPEED_100)
+		if (speed == SPEED_100)
 			cp->link_cntl |= BMCR_SPEED100;
-		else if (ep->speed == SPEED_1000)
+		else if (speed == SPEED_1000)
 			cp->link_cntl |= CAS_BMCR_SPEED1000;
 		if (ep->duplex == DUPLEX_FULL)
 			cp->link_cntl |= BMCR_FULLDPLX;
@@ -4605,18 +4606,17 @@ static int cas_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	if (bmcr & BMCR_ANENABLE) {
 		cmd->advertising |= ADVERTISED_Autoneg;
 		cmd->autoneg = AUTONEG_ENABLE;
-		cmd->speed = ((speed == 10) ?
-			      SPEED_10 :
-			      ((speed == 1000) ?
-			       SPEED_1000 : SPEED_100));
+		ethtool_cmd_speed_set(cmd, ((speed == 10) ?
+					    SPEED_10 :
+					    ((speed == 1000) ?
+					     SPEED_1000 : SPEED_100)));
 		cmd->duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
 	} else {
 		cmd->autoneg = AUTONEG_DISABLE;
-		cmd->speed =
-			(bmcr & CAS_BMCR_SPEED1000) ?
-			SPEED_1000 :
-			((bmcr & BMCR_SPEED100) ? SPEED_100:
-			 SPEED_10);
+		ethtool_cmd_speed_set(cmd, ((bmcr & CAS_BMCR_SPEED1000) ?
+					    SPEED_1000 :
+					    ((bmcr & BMCR_SPEED100) ?
+					     SPEED_100 : SPEED_10)));
 		cmd->duplex =
 			(bmcr & BMCR_FULLDPLX) ?
 			DUPLEX_FULL : DUPLEX_HALF;
@@ -4633,14 +4633,14 @@ static int cas_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		 * settings that we configured.
 		 */
 		if (cp->link_cntl & BMCR_ANENABLE) {
-			cmd->speed = 0;
+			ethtool_cmd_speed_set(cmd, 0);
 			cmd->duplex = 0xff;
 		} else {
-			cmd->speed = SPEED_10;
+			ethtool_cmd_speed_set(cmd, SPEED_10);
 			if (cp->link_cntl & BMCR_SPEED100) {
-				cmd->speed = SPEED_100;
+				ethtool_cmd_speed_set(cmd, SPEED_100);
 			} else if (cp->link_cntl & CAS_BMCR_SPEED1000) {
-				cmd->speed = SPEED_1000;
+				ethtool_cmd_speed_set(cmd, SPEED_1000);
 			}
 			cmd->duplex = (cp->link_cntl & BMCR_FULLDPLX)?
 				DUPLEX_FULL : DUPLEX_HALF;
@@ -4653,6 +4653,7 @@ static int cas_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct cas *cp = netdev_priv(dev);
 	unsigned long flags;
+	u32 speed = ethtool_cmd_speed(cmd);
 
 	/* Verify the settings we care about. */
 	if (cmd->autoneg != AUTONEG_ENABLE &&
@@ -4660,9 +4661,9 @@ static int cas_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		return -EINVAL;
 
 	if (cmd->autoneg == AUTONEG_DISABLE &&
-	    ((cmd->speed != SPEED_1000 &&
-	      cmd->speed != SPEED_100 &&
-	      cmd->speed != SPEED_10) ||
+	    ((speed != SPEED_1000 &&
+	      speed != SPEED_100 &&
+	      speed != SPEED_10) ||
 	     (cmd->duplex != DUPLEX_HALF &&
 	      cmd->duplex != DUPLEX_FULL)))
 		return -EINVAL;
@@ -5165,7 +5166,7 @@ err_out_free_res:
 	pci_release_regions(pdev);
 
 err_write_cacheline:
-	/* Try to restore it in case the error occured after we
+	/* Try to restore it in case the error occurred after we
 	 * set it.
 	 */
 	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, orig_cacheline_size);
diff --git a/drivers/net/cassini.h b/drivers/net/cassini.h
index faf4746a0f3..b361424d5f5 100644
--- a/drivers/net/cassini.h
+++ b/drivers/net/cassini.h
@@ -772,7 +772,7 @@
 #define    RX_DEBUG_INTR_WRITE_PTR_MASK    0xC0000000 /* interrupt write pointer
 							 of the interrupt queue */
 
-/* flow control frames are emmitted using two PAUSE thresholds:
+/* flow control frames are emitted using two PAUSE thresholds:
  * XOFF PAUSE uses pause time value pre-programmed in the Send PAUSE MAC reg
  * XON PAUSE uses a pause time of 0. granularity of threshold is 64bytes.
  * PAUSE thresholds defined in terms of FIFO occupancy and may be translated
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index 092f31a126e..c26d863e169 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -264,11 +264,6 @@ struct adapter {
 
 enum {                                           /* adapter flags */
 	FULL_INIT_DONE        = 1 << 0,
-	TSO_CAPABLE           = 1 << 2,
-	TCP_CSUM_CAPABLE      = 1 << 3,
-	UDP_CSUM_CAPABLE      = 1 << 4,
-	VLAN_ACCEL_CAPABLE    = 1 << 5,
-	RX_CSUM_ENABLED       = 1 << 6,
 };
 
 struct mdio_ops;
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index 0f71304e054..b422d83f534 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -192,10 +192,8 @@ static void link_start(struct port_info *p)
 
 static void enable_hw_csum(struct adapter *adapter)
 {
-	if (adapter->flags & TSO_CAPABLE)
+	if (adapter->port[0].dev->hw_features & NETIF_F_TSO)
 		t1_tp_set_ip_checksum_offload(adapter->tp, 1);	/* for TSO only */
-	if (adapter->flags & UDP_CSUM_CAPABLE)
-		t1_tp_set_udp_checksum_offload(adapter->tp, 1);
 	t1_tp_set_tcp_checksum_offload(adapter->tp, 1);
 }
 
@@ -579,10 +577,10 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	cmd->advertising = p->link_config.advertising;
 
 	if (netif_carrier_ok(dev)) {
-		cmd->speed = p->link_config.speed;
+		ethtool_cmd_speed_set(cmd, p->link_config.speed);
 		cmd->duplex = p->link_config.duplex;
 	} else {
-		cmd->speed = -1;
+		ethtool_cmd_speed_set(cmd, -1);
 		cmd->duplex = -1;
 	}
 
@@ -640,11 +638,12 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		return -EOPNOTSUPP;             /* can't change speed/duplex */
 
 	if (cmd->autoneg == AUTONEG_DISABLE) {
-		int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+		u32 speed = ethtool_cmd_speed(cmd);
+		int cap = speed_duplex_to_caps(speed, cmd->duplex);
 
-		if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
+		if (!(lc->supported & cap) || (speed == SPEED_1000))
 			return -EINVAL;
-		lc->requested_speed = cmd->speed;
+		lc->requested_speed = speed;
 		lc->requested_duplex = cmd->duplex;
 		lc->advertising = 0;
 	} else {
@@ -705,33 +704,6 @@ static int set_pauseparam(struct net_device *dev,
 	return 0;
 }
 
-static u32 get_rx_csum(struct net_device *dev)
-{
-	struct adapter *adapter = dev->ml_priv;
-
-	return (adapter->flags & RX_CSUM_ENABLED) != 0;
-}
-
-static int set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct adapter *adapter = dev->ml_priv;
-
-	if (data)
-		adapter->flags |= RX_CSUM_ENABLED;
-	else
-		adapter->flags &= ~RX_CSUM_ENABLED;
-	return 0;
-}
-
-static int set_tso(struct net_device *dev, u32 value)
-{
-	struct adapter *adapter = dev->ml_priv;
-
-	if (!(adapter->flags & TSO_CAPABLE))
-		return value ? -EOPNOTSUPP : 0;
-	return ethtool_op_set_tso(dev, value);
-}
-
 static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
 {
 	struct adapter *adapter = dev->ml_priv;
@@ -831,17 +803,12 @@ static const struct ethtool_ops t1_ethtool_ops = {
 	.get_eeprom        = get_eeprom,
 	.get_pauseparam    = get_pauseparam,
 	.set_pauseparam    = set_pauseparam,
-	.get_rx_csum       = get_rx_csum,
-	.set_rx_csum       = set_rx_csum,
-	.set_tx_csum       = ethtool_op_set_tx_csum,
-	.set_sg            = ethtool_op_set_sg,
 	.get_link          = ethtool_op_get_link,
 	.get_strings       = get_strings,
 	.get_sset_count	   = get_sset_count,
 	.get_ethtool_stats = get_stats,
 	.get_regs_len      = get_regs_len,
 	.get_regs          = get_regs,
-	.set_tso           = set_tso,
 };
 
 static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
@@ -1105,28 +1072,28 @@ static int __devinit init_one(struct pci_dev *pdev,
 		netdev->mem_start = mmio_start;
 		netdev->mem_end = mmio_start + mmio_len - 1;
 		netdev->ml_priv = adapter;
-		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
-		netdev->features |= NETIF_F_LLTX;
+		netdev->hw_features |= NETIF_F_SG | NETIF_F_IP_CSUM |
+			NETIF_F_RXCSUM;
+		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM |
+			NETIF_F_RXCSUM | NETIF_F_LLTX;
 
-		adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE;
 		if (pci_using_dac)
 			netdev->features |= NETIF_F_HIGHDMA;
 		if (vlan_tso_capable(adapter)) {
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-			adapter->flags |= VLAN_ACCEL_CAPABLE;
 			netdev->features |=
 				NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 #endif
 
 			/* T204: disable TSO */
 			if (!(is_T2(adapter)) || bi->port_number != 4) {
-				adapter->flags |= TSO_CAPABLE;
+				netdev->hw_features |= NETIF_F_TSO;
 				netdev->features |= NETIF_F_TSO;
 			}
 		}
 
 		netdev->netdev_ops = &cxgb_netdev_ops;
-		netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ?
+		netdev->hard_header_len += (netdev->hw_features & NETIF_F_TSO) ?
 			sizeof(struct cpl_tx_pkt_lso) : sizeof(struct cpl_tx_pkt);
 
 		netif_napi_add(netdev, &adapter->napi, t1_poll, 64);
diff --git a/drivers/net/chelsio/mv88e1xxx.c b/drivers/net/chelsio/mv88e1xxx.c
index 809047a99e9..71018a4fdf1 100644
--- a/drivers/net/chelsio/mv88e1xxx.c
+++ b/drivers/net/chelsio/mv88e1xxx.c
@@ -41,7 +41,7 @@ static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval)
  *
  * PARAMS: cphy     - Pointer to PHY instance data.
  *
- * RETURN:  0 - Successfull reset.
+ * RETURN:  0 - Successful reset.
  *         -1 - Timeout.
  */
 static int mv88e1xxx_reset(struct cphy *cphy, int wait)
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c
index 7dbb16d36ff..40c7b93abab 100644
--- a/drivers/net/chelsio/pm3393.c
+++ b/drivers/net/chelsio/pm3393.c
@@ -293,7 +293,7 @@ static int pm3393_enable_port(struct cmac *cmac, int which)
 	pm3393_enable(cmac, which);
 
 	/*
-	 * XXX This should be done by the PHY and preferrably not at all.
+	 * XXX This should be done by the PHY and preferably not at all.
 	 * The PHY doesn't give us link status indication on its own so have
 	 * the link management code query it instead.
 	 */
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index f778b15ad3f..b948ea73755 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -929,7 +929,7 @@ void t1_sge_intr_enable(struct sge *sge)
 	u32 en = SGE_INT_ENABLE;
 	u32 val = readl(sge->adapter->regs + A_PL_ENABLE);
 
-	if (sge->adapter->flags & TSO_CAPABLE)
+	if (sge->adapter->port[0].dev->hw_features & NETIF_F_TSO)
 		en &= ~F_PACKET_TOO_BIG;
 	writel(en, sge->adapter->regs + A_SG_INT_ENABLE);
 	writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE);
@@ -952,7 +952,7 @@ int t1_sge_intr_error_handler(struct sge *sge)
 	struct adapter *adapter = sge->adapter;
 	u32 cause = readl(adapter->regs + A_SG_INT_CAUSE);
 
-	if (adapter->flags & TSO_CAPABLE)
+	if (adapter->port[0].dev->hw_features & NETIF_F_TSO)
 		cause &= ~F_PACKET_TOO_BIG;
 	if (cause & F_RESPQ_EXHAUSTED)
 		sge->stats.respQ_empty++;
@@ -1369,6 +1369,7 @@ static void sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
 	const struct cpl_rx_pkt *p;
 	struct adapter *adapter = sge->adapter;
 	struct sge_port_stats *st;
+	struct net_device *dev;
 
 	skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad);
 	if (unlikely(!skb)) {
@@ -1384,9 +1385,10 @@ static void sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
 	__skb_pull(skb, sizeof(*p));
 
 	st = this_cpu_ptr(sge->port_stats[p->iff]);
+	dev = adapter->port[p->iff].dev;
 
-	skb->protocol = eth_type_trans(skb, adapter->port[p->iff].dev);
-	if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff &&
+	skb->protocol = eth_type_trans(skb, dev);
+	if ((dev->features & NETIF_F_RXCSUM) && p->csum == 0xffff &&
 	    skb->protocol == htons(ETH_P_IP) &&
 	    (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) {
 		++st->rx_cso_good;
@@ -1662,7 +1664,7 @@ irqreturn_t t1_interrupt(int irq, void *data)
  * The code figures out how many entries the sk_buff will require in the
  * cmdQ and updates the cmdQ data structure with the state once the enqueue
  * has complete. Then, it doesn't access the global structure anymore, but
- * uses the corresponding fields on the stack. In conjuction with a spinlock
+ * uses the corresponding fields on the stack. In conjunction with a spinlock
  * around that code, we can make the function reentrant without holding the
  * lock when we actually enqueue (which might be expensive, especially on
  * architectures with IO MMUs).
@@ -1838,8 +1840,7 @@ netdev_tx_t t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			return NETDEV_TX_OK;
 		}
 
-		if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
-		    skb->ip_summed == CHECKSUM_PARTIAL &&
+		if (skb->ip_summed == CHECKSUM_PARTIAL &&
 		    ip_hdr(skb)->protocol == IPPROTO_UDP) {
 			if (unlikely(skb_checksum_help(skb))) {
 				pr_debug("%s: unable to do udp checksum\n", dev->name);
diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c
index 6222d585e44..8bed4a59e65 100644
--- a/drivers/net/chelsio/tp.c
+++ b/drivers/net/chelsio/tp.c
@@ -152,11 +152,6 @@ void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable)
 	set_csum_offload(tp, F_IP_CSUM, enable);
 }
 
-void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable)
-{
-	set_csum_offload(tp, F_UDP_CSUM, enable);
-}
-
 void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable)
 {
 	set_csum_offload(tp, F_TCP_CSUM, enable);
diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h
index 32fc71e5891..dfd8ce25106 100644
--- a/drivers/net/chelsio/tp.h
+++ b/drivers/net/chelsio/tp.h
@@ -65,7 +65,6 @@ void t1_tp_intr_clear(struct petp *tp);
 int t1_tp_intr_handler(struct petp *tp);
 
 void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps);
-void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable);
 void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable);
 void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable);
 int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size);
diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/chelsio/vsc7326.c
index 106a590f0d9..b0cb388f5e1 100644
--- a/drivers/net/chelsio/vsc7326.c
+++ b/drivers/net/chelsio/vsc7326.c
@@ -566,7 +566,7 @@ static int mac_disable(struct cmac *mac, int which)
 	for (i = 0; i <= 0x3a; ++i)
 		vsc_write(mac->adapter, CRA(4, port, i), 0);
 
-	/* Clear sofware counters */
+	/* Clear software counters */
 	memset(&mac->stats, 0, sizeof(struct cmac_statistics));
 
 	return 0;
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 8cca60e4344..cde59b4e5ef 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2966,31 +2966,36 @@ static int cnic_service_bnx2x(void *data, void *status_blk)
 	return 0;
 }
 
-static void cnic_ulp_stop(struct cnic_dev *dev)
+static void cnic_ulp_stop_one(struct cnic_local *cp, int if_type)
 {
-	struct cnic_local *cp = dev->cnic_priv;
-	int if_type;
-
-	cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+	struct cnic_ulp_ops *ulp_ops;
 
-	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
-		struct cnic_ulp_ops *ulp_ops;
+	if (if_type == CNIC_ULP_ISCSI)
+		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
 
-		mutex_lock(&cnic_lock);
-		ulp_ops = rcu_dereference_protected(cp->ulp_ops[if_type],
-						    lockdep_is_held(&cnic_lock));
-		if (!ulp_ops) {
-			mutex_unlock(&cnic_lock);
-			continue;
-		}
-		set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+	mutex_lock(&cnic_lock);
+	ulp_ops = rcu_dereference_protected(cp->ulp_ops[if_type],
+					    lockdep_is_held(&cnic_lock));
+	if (!ulp_ops) {
 		mutex_unlock(&cnic_lock);
+		return;
+	}
+	set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+	mutex_unlock(&cnic_lock);
 
-		if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
-			ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+	if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+		ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
 
-		clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
-	}
+	clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+}
+
+static void cnic_ulp_stop(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int if_type;
+
+	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++)
+		cnic_ulp_stop_one(cp, if_type);
 }
 
 static void cnic_ulp_start(struct cnic_dev *dev)
@@ -3039,6 +3044,12 @@ static int cnic_ctl(void *data, struct cnic_ctl_info *info)
 
 		cnic_put(dev);
 		break;
+	case CNIC_CTL_STOP_ISCSI_CMD: {
+		struct cnic_local *cp = dev->cnic_priv;
+		set_bit(CNIC_LCL_FL_STOP_ISCSI, &cp->cnic_local_flags);
+		queue_delayed_work(cnic_wq, &cp->delete_task, 0);
+		break;
+	}
 	case CNIC_CTL_COMPLETION_CMD: {
 		u32 cid = BNX2X_SW_CID(info->data.comp.cid);
 		u32 l5_cid;
@@ -3562,8 +3573,12 @@ static void cnic_init_csk_state(struct cnic_sock *csk)
 
 static int cnic_cm_connect(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
 {
+	struct cnic_local *cp = csk->dev->cnic_priv;
 	int err = 0;
 
+	if (cp->ethdev->drv_state & CNIC_DRV_STATE_NO_ISCSI)
+		return -EOPNOTSUPP;
+
 	if (!cnic_in_use(csk))
 		return -EINVAL;
 
@@ -3965,6 +3980,15 @@ static void cnic_delete_task(struct work_struct *work)
 	cp = container_of(work, struct cnic_local, delete_task.work);
 	dev = cp->dev;
 
+	if (test_and_clear_bit(CNIC_LCL_FL_STOP_ISCSI, &cp->cnic_local_flags)) {
+		struct drv_ctl_info info;
+
+		cnic_ulp_stop_one(cp, CNIC_ULP_ISCSI);
+
+		info.cmd = DRV_CTL_ISCSI_STOPPED_CMD;
+		cp->ethdev->drv_ctl(dev->netdev, &info);
+	}
+
 	for (i = 0; i < cp->max_cid_space; i++) {
 		struct cnic_context *ctx = &cp->ctx_tbl[i];
 
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index 4456260c653..3367a6d3a77 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -226,6 +226,7 @@ struct cnic_local {
 #define	CNIC_LCL_FL_KWQ_INIT		0x0
 #define	CNIC_LCL_FL_L2_WAIT		0x1
 #define	CNIC_LCL_FL_RINGS_INITED	0x2
+#define	CNIC_LCL_FL_STOP_ISCSI		0x4
 
 	struct cnic_dev *dev;
 
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index e01b49ee359..fdd8e46a905 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -12,8 +12,8 @@
 #ifndef CNIC_IF_H
 #define CNIC_IF_H
 
-#define CNIC_MODULE_VERSION	"2.2.13"
-#define CNIC_MODULE_RELDATE	"Jan 31, 2011"
+#define CNIC_MODULE_VERSION	"2.2.14"
+#define CNIC_MODULE_RELDATE	"Mar 30, 2011"
 
 #define CNIC_ULP_RDMA		0
 #define CNIC_ULP_ISCSI		1
@@ -85,6 +85,7 @@ struct kcqe {
 #define CNIC_CTL_STOP_CMD		1
 #define CNIC_CTL_START_CMD		2
 #define CNIC_CTL_COMPLETION_CMD		3
+#define CNIC_CTL_STOP_ISCSI_CMD		4
 
 #define DRV_CTL_IO_WR_CMD		0x101
 #define DRV_CTL_IO_RD_CMD		0x102
@@ -94,6 +95,7 @@ struct kcqe {
 #define DRV_CTL_START_L2_CMD		0x106
 #define DRV_CTL_STOP_L2_CMD		0x107
 #define DRV_CTL_RET_L2_SPQ_CREDIT_CMD	0x10c
+#define DRV_CTL_ISCSI_STOPPED_CMD	0x10d
 
 struct cnic_ctl_completion {
 	u32	cid;
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 80c2feeefec..e66aceb57ce 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -491,8 +491,8 @@ e100_open(struct net_device *dev)
 
 	/* allocate the irq corresponding to the receiving DMA */
 
-	if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt,
-			IRQF_SAMPLE_RANDOM, cardname, (void *)dev)) {
+	if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt, 0, cardname,
+			(void *)dev)) {
 		goto grace_exit0;
 	}
 
@@ -1383,7 +1383,7 @@ e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	spin_lock(&np->lock); /* Preempt protection */
 	switch (cmd) {
 		/* The ioctls below should be considered obsolete but are */
-		/* still present for compatability with old scripts/apps  */
+		/* still present for compatibility with old scripts/apps  */
 		case SET_ETH_SPEED_10:                  /* 10 Mbps */
 			e100_set_speed(dev, 10);
 			break;
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index ef67be59680..7300de5a142 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -50,11 +50,6 @@ struct adapter;
 struct sge_qset;
 struct port_info;
 
-enum {			/* rx_offload flags */
-	T3_RX_CSUM	= 1 << 0,
-	T3_LRO		= 1 << 1,
-};
-
 enum mac_idx_types {
 	LAN_MAC_IDX	= 0,
 	SAN_MAC_IDX,
@@ -74,7 +69,6 @@ struct port_info {
 	struct vlan_group *vlan_grp;
 	struct sge_qset *qs;
 	u8 port_id;
-	u8 rx_offload;
 	u8 nqsets;
 	u8 first_qset;
 	struct cphy phy;
@@ -212,7 +206,6 @@ struct sge_qset {		/* an SGE queue set */
 	struct sge_fl fl[SGE_RXQ_PER_SET];
 	struct sge_txq txq[SGE_TXQ_PER_SET];
 	int nomem;
-	int lro_enabled;
 	void *lro_va;
 	struct net_device *netdev;
 	struct netdev_queue *tx_q;	/* associated netdev TX queue */
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 5ccb77d078a..056ee8c831f 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -317,7 +317,6 @@ struct tp_params {
 
 struct qset_params {		/* SGE queue set parameters */
 	unsigned int polling;	/* polling/interrupt service for rspq */
-	unsigned int lro;	/* large receive offload */
 	unsigned int coalesce_usecs;	/* irq coalescing timer */
 	unsigned int rspq_size;	/* # of entries in response queue */
 	unsigned int fl_size;	/* # of entries in regular free list */
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 91089314329..9081ce03714 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -644,26 +644,6 @@ static void enable_all_napi(struct adapter *adap)
 }
 
 /**
- *	set_qset_lro - Turn a queue set's LRO capability on and off
- *	@dev: the device the qset is attached to
- *	@qset_idx: the queue set index
- *	@val: the LRO switch
- *
- *	Sets LRO on or off for a particular queue set.
- *	the device's features flag is updated to reflect the LRO
- *	capability when all queues belonging to the device are
- *	in the same state.
- */
-static void set_qset_lro(struct net_device *dev, int qset_idx, int val)
-{
-	struct port_info *pi = netdev_priv(dev);
-	struct adapter *adapter = pi->adapter;
-
-	adapter->params.sge.qset[qset_idx].lro = !!val;
-	adapter->sge.qs[qset_idx].lro_enabled = !!val;
-}
-
-/**
  *	setup_sge_qsets - configure SGE Tx/Rx/response queues
  *	@adap: the adapter
  *
@@ -685,7 +665,6 @@ static int setup_sge_qsets(struct adapter *adap)
 
 		pi->qs = &adap->sge.qs[pi->first_qset];
 		for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
-			set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO);
 			err = t3_sge_alloc_qset(adap, qset_idx, 1,
 				(adap->flags & USING_MSIX) ? qset_idx + 1 :
 							     irq_idx,
@@ -1749,23 +1728,26 @@ static int restart_autoneg(struct net_device *dev)
 	return 0;
 }
 
-static int cxgb3_phys_id(struct net_device *dev, u32 data)
+static int set_phys_id(struct net_device *dev,
+		       enum ethtool_phys_id_state state)
 {
 	struct port_info *pi = netdev_priv(dev);
 	struct adapter *adapter = pi->adapter;
-	int i;
 
-	if (data == 0)
-		data = 2;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 1;	/* cycle on/off once per second */
 
-	for (i = 0; i < data * 2; i++) {
+	case ETHTOOL_ID_OFF:
+		t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, 0);
+		break;
+
+	case ETHTOOL_ID_ON:
+	case ETHTOOL_ID_INACTIVE:
 		t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
-				 (i & 1) ? F_GPIO0_OUT_VAL : 0);
-		if (msleep_interruptible(500))
-			break;
-	}
-	t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
 			 F_GPIO0_OUT_VAL);
+	}
+
 	return 0;
 }
 
@@ -1777,10 +1759,10 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	cmd->advertising = p->link_config.advertising;
 
 	if (netif_carrier_ok(dev)) {
-		cmd->speed = p->link_config.speed;
+		ethtool_cmd_speed_set(cmd, p->link_config.speed);
 		cmd->duplex = p->link_config.duplex;
 	} else {
-		cmd->speed = -1;
+		ethtool_cmd_speed_set(cmd, -1);
 		cmd->duplex = -1;
 	}
 
@@ -1839,7 +1821,8 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		 * being requested.
 		 */
 		if (cmd->autoneg == AUTONEG_DISABLE) {
-			int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+			u32 speed = ethtool_cmd_speed(cmd);
+			int cap = speed_duplex_to_caps(speed, cmd->duplex);
 			if (lc->supported & cap)
 				return 0;
 		}
@@ -1847,11 +1830,12 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	}
 
 	if (cmd->autoneg == AUTONEG_DISABLE) {
-		int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+		u32 speed = ethtool_cmd_speed(cmd);
+		int cap = speed_duplex_to_caps(speed, cmd->duplex);
 
-		if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
+		if (!(lc->supported & cap) || (speed == SPEED_1000))
 			return -EINVAL;
-		lc->requested_speed = cmd->speed;
+		lc->requested_speed = speed;
 		lc->requested_duplex = cmd->duplex;
 		lc->advertising = 0;
 	} else {
@@ -1907,29 +1891,6 @@ static int set_pauseparam(struct net_device *dev,
 	return 0;
 }
 
-static u32 get_rx_csum(struct net_device *dev)
-{
-	struct port_info *p = netdev_priv(dev);
-
-	return p->rx_offload & T3_RX_CSUM;
-}
-
-static int set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct port_info *p = netdev_priv(dev);
-
-	if (data) {
-		p->rx_offload |= T3_RX_CSUM;
-	} else {
-		int i;
-
-		p->rx_offload &= ~(T3_RX_CSUM | T3_LRO);
-		for (i = p->first_qset; i < p->first_qset + p->nqsets; i++)
-			set_qset_lro(dev, i, 0);
-	}
-	return 0;
-}
-
 static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
 {
 	struct port_info *pi = netdev_priv(dev);
@@ -2101,20 +2062,15 @@ static const struct ethtool_ops cxgb_ethtool_ops = {
 	.set_eeprom = set_eeprom,
 	.get_pauseparam = get_pauseparam,
 	.set_pauseparam = set_pauseparam,
-	.get_rx_csum = get_rx_csum,
-	.set_rx_csum = set_rx_csum,
-	.set_tx_csum = ethtool_op_set_tx_csum,
-	.set_sg = ethtool_op_set_sg,
 	.get_link = ethtool_op_get_link,
 	.get_strings = get_strings,
-	.phys_id = cxgb3_phys_id,
+	.set_phys_id = set_phys_id,
 	.nway_reset = restart_autoneg,
 	.get_sset_count = get_sset_count,
 	.get_ethtool_stats = get_stats,
 	.get_regs_len = get_regs_len,
 	.get_regs = get_regs,
 	.get_wol = get_wol,
-	.set_tso = ethtool_op_set_tso,
 };
 
 static int in_range(int val, int lo, int hi)
@@ -2162,15 +2118,6 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			      MAX_RSPQ_ENTRIES))
 			return -EINVAL;
 
-		if ((adapter->flags & FULL_INIT_DONE) && t.lro > 0)
-			for_each_port(adapter, i) {
-				pi = adap2pinfo(adapter, i);
-				if (t.qset_idx >= pi->first_qset &&
-				    t.qset_idx < pi->first_qset + pi->nqsets &&
-				    !(pi->rx_offload & T3_RX_CSUM))
-					return -EINVAL;
-			}
-
 		if ((adapter->flags & FULL_INIT_DONE) &&
 			(t.rspq_size >= 0 || t.fl_size[0] >= 0 ||
 			t.fl_size[1] >= 0 || t.txq_size[0] >= 0 ||
@@ -2231,8 +2178,14 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 				}
 			}
 		}
-		if (t.lro >= 0)
-			set_qset_lro(dev, t.qset_idx, t.lro);
+
+		if (t.lro >= 0) {
+			if (t.lro)
+				dev->wanted_features |= NETIF_F_GRO;
+			else
+				dev->wanted_features &= ~NETIF_F_GRO;
+			netdev_update_features(dev);
+		}
 
 		break;
 	}
@@ -2266,7 +2219,7 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 		t.fl_size[0] = q->fl_size;
 		t.fl_size[1] = q->jumbo_size;
 		t.polling = q->polling;
-		t.lro = q->lro;
+		t.lro = !!(dev->features & NETIF_F_GRO);
 		t.intr_lat = q->coalesce_usecs;
 		t.cong_thres = q->cong_thres;
 		t.qnum = q1;
@@ -3304,18 +3257,18 @@ static int __devinit init_one(struct pci_dev *pdev,
 		adapter->port[i] = netdev;
 		pi = netdev_priv(netdev);
 		pi->adapter = adapter;
-		pi->rx_offload = T3_RX_CSUM | T3_LRO;
 		pi->port_id = i;
 		netif_carrier_off(netdev);
 		netdev->irq = pdev->irq;
 		netdev->mem_start = mmio_start;
 		netdev->mem_end = mmio_start + mmio_len - 1;
-		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
-		netdev->features |= NETIF_F_GRO;
+		netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+			NETIF_F_TSO | NETIF_F_RXCSUM;
+		netdev->features |= netdev->hw_features |
+			NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 		if (pci_using_dac)
 			netdev->features |= NETIF_F_HIGHDMA;
 
-		netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 		netdev->netdev_ops = &cxgb_netdev_ops;
 		SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops);
 	}
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index f9f6645b2e6..cba1401377a 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -199,7 +199,7 @@ static inline void refill_rspq(struct adapter *adapter,
  *	need_skb_unmap - does the platform need unmapping of sk_buffs?
  *
  *	Returns true if the platform needs sk_buff unmapping.  The compiler
- *	optimizes away unecessary code if this returns true.
+ *	optimizes away unnecessary code if this returns true.
  */
 static inline int need_skb_unmap(void)
 {
@@ -2019,7 +2019,7 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
 	skb_pull(skb, sizeof(*p) + pad);
 	skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
 	pi = netdev_priv(skb->dev);
-	if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid &&
+	if ((skb->dev->features & NETIF_F_RXCSUM) && p->csum_valid &&
 	    p->csum == htons(0xffff) && !p->fragment) {
 		qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2120,7 +2120,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 		offset = 2 + sizeof(struct cpl_rx_pkt);
 		cpl = qs->lro_va = sd->pg_chunk.va + 2;
 
-		if ((pi->rx_offload & T3_RX_CSUM) &&
+		if ((qs->netdev->features & NETIF_F_RXCSUM) &&
 		     cpl->csum_valid && cpl->csum == htons(0xffff)) {
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 			qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
@@ -2285,7 +2285,8 @@ static int process_responses(struct adapter *adap, struct sge_qset *qs,
 	q->next_holdoff = q->holdoff_tmr;
 
 	while (likely(budget_left && is_new_response(r, q))) {
-		int packet_complete, eth, ethpad = 2, lro = qs->lro_enabled;
+		int packet_complete, eth, ethpad = 2;
+		int lro = !!(qs->netdev->features & NETIF_F_GRO);
 		struct sk_buff *skb = NULL;
 		u32 len, flags;
 		__be32 rss_hi, rss_lo;
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index d55db6b38e7..c688421da9c 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1386,11 +1386,11 @@ struct intr_info {
  *	@reg: the interrupt status register to process
  *	@mask: a mask to apply to the interrupt status
  *	@acts: table of interrupt actions
- *	@stats: statistics counters tracking interrupt occurences
+ *	@stats: statistics counters tracking interrupt occurrences
  *
  *	A table driven interrupt handler that applies a set of masks to an
  *	interrupt status word and performs the corresponding actions if the
- *	interrupts described by the mask have occured.  The actions include
+ *	interrupts described by the mask have occurred.  The actions include
  *	optionally printing a warning or alert message, and optionally
  *	incrementing a stat counter.  The table is terminated by an entry
  *	specifying mask 0.  Returns the number of fatal interrupt conditions.
@@ -2783,7 +2783,7 @@ static void init_mtus(unsigned short mtus[])
 {
 	/*
 	 * See draft-mathis-plpmtud-00.txt for the values.  The min is 88 so
-	 * it can accomodate max size TCP/IP headers when SACK and timestamps
+	 * it can accommodate max size TCP/IP headers when SACK and timestamps
 	 * are enabled and still have at least 8 bytes of payload.
 	 */
 	mtus[0] = 88;
diff --git a/drivers/net/cxgb4/cxgb4.h b/drivers/net/cxgb4/cxgb4.h
index 01d49eaa44d..bc9982a4c1f 100644
--- a/drivers/net/cxgb4/cxgb4.h
+++ b/drivers/net/cxgb4/cxgb4.h
@@ -290,7 +290,6 @@ struct port_info {
 	u8     port_id;
 	u8     tx_chan;
 	u8     lport;                 /* associated offload logical port */
-	u8     rx_offload;            /* CSO, etc */
 	u8     nqsets;                /* # of qsets */
 	u8     first_qset;            /* index of first qset */
 	u8     rss_mode;
@@ -298,11 +297,6 @@ struct port_info {
 	u16   *rss;
 };
 
-/* port_info.rx_offload flags */
-enum {
-	RX_CSO = 1 << 0,
-};
-
 struct dentry;
 struct work_struct;
 
diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/cxgb4/cxgb4_main.c
index 5352c8a23f4..7e3cfbe89e3 100644
--- a/drivers/net/cxgb4/cxgb4_main.c
+++ b/drivers/net/cxgb4/cxgb4_main.c
@@ -1336,15 +1336,20 @@ static int restart_autoneg(struct net_device *dev)
 	return 0;
 }
 
-static int identify_port(struct net_device *dev, u32 data)
+static int identify_port(struct net_device *dev,
+			 enum ethtool_phys_id_state state)
 {
+	unsigned int val;
 	struct adapter *adap = netdev2adap(dev);
 
-	if (data == 0)
-		data = 2;     /* default to 2 seconds */
+	if (state == ETHTOOL_ID_ACTIVE)
+		val = 0xffff;
+	else if (state == ETHTOOL_ID_INACTIVE)
+		val = 0;
+	else
+		return -EINVAL;
 
-	return t4_identify_port(adap, adap->fn, netdev2pinfo(dev)->viid,
-				data * 5);
+	return t4_identify_port(adap, adap->fn, netdev2pinfo(dev)->viid, val);
 }
 
 static unsigned int from_fw_linkcaps(unsigned int type, unsigned int caps)
@@ -1431,7 +1436,8 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	cmd->supported = from_fw_linkcaps(p->port_type, p->link_cfg.supported);
 	cmd->advertising = from_fw_linkcaps(p->port_type,
 					    p->link_cfg.advertising);
-	cmd->speed = netif_carrier_ok(dev) ? p->link_cfg.speed : 0;
+	ethtool_cmd_speed_set(cmd,
+			      netif_carrier_ok(dev) ? p->link_cfg.speed : 0);
 	cmd->duplex = DUPLEX_FULL;
 	cmd->autoneg = p->link_cfg.autoneg;
 	cmd->maxtxpkt = 0;
@@ -1455,6 +1461,7 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	unsigned int cap;
 	struct port_info *p = netdev_priv(dev);
 	struct link_config *lc = &p->link_cfg;
+	u32 speed = ethtool_cmd_speed(cmd);
 
 	if (cmd->duplex != DUPLEX_FULL)     /* only full-duplex supported */
 		return -EINVAL;
@@ -1465,16 +1472,16 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		 * being requested.
 		 */
 		if (cmd->autoneg == AUTONEG_DISABLE &&
-		    (lc->supported & speed_to_caps(cmd->speed)))
-				return 0;
+		    (lc->supported & speed_to_caps(speed)))
+			return 0;
 		return -EINVAL;
 	}
 
 	if (cmd->autoneg == AUTONEG_DISABLE) {
-		cap = speed_to_caps(cmd->speed);
+		cap = speed_to_caps(speed);
 
-		if (!(lc->supported & cap) || cmd->speed == SPEED_1000 ||
-		    cmd->speed == SPEED_10000)
+		if (!(lc->supported & cap) || (speed == SPEED_1000) ||
+		    (speed == SPEED_10000))
 			return -EINVAL;
 		lc->requested_speed = cap;
 		lc->advertising = 0;
@@ -1526,24 +1533,6 @@ static int set_pauseparam(struct net_device *dev,
 	return 0;
 }
 
-static u32 get_rx_csum(struct net_device *dev)
-{
-	struct port_info *p = netdev_priv(dev);
-
-	return p->rx_offload & RX_CSO;
-}
-
-static int set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct port_info *p = netdev_priv(dev);
-
-	if (data)
-		p->rx_offload |= RX_CSO;
-	else
-		p->rx_offload &= ~RX_CSO;
-	return 0;
-}
-
 static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
 {
 	const struct port_info *pi = netdev_priv(dev);
@@ -1865,36 +1854,20 @@ static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	return err;
 }
 
-#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
-
-static int set_tso(struct net_device *dev, u32 value)
-{
-	if (value)
-		dev->features |= TSO_FLAGS;
-	else
-		dev->features &= ~TSO_FLAGS;
-	return 0;
-}
-
-static int set_flags(struct net_device *dev, u32 flags)
+static int cxgb_set_features(struct net_device *dev, u32 features)
 {
+	const struct port_info *pi = netdev_priv(dev);
+	u32 changed = dev->features ^ features;
 	int err;
-	unsigned long old_feat = dev->features;
 
-	err = ethtool_op_set_flags(dev, flags, ETH_FLAG_RXHASH |
-				   ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN);
-	if (err)
-		return err;
-
-	if ((old_feat ^ dev->features) & NETIF_F_HW_VLAN_RX) {
-		const struct port_info *pi = netdev_priv(dev);
+	if (!(changed & NETIF_F_HW_VLAN_RX))
+		return 0;
 
-		err = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, -1,
-				    -1, -1, -1, !!(flags & ETH_FLAG_RXVLAN),
-				    true);
-		if (err)
-			dev->features = old_feat;
-	}
+	err = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, -1,
+			    -1, -1, -1,
+			    !!(features & NETIF_F_HW_VLAN_RX), true);
+	if (unlikely(err))
+		dev->features = features ^ NETIF_F_HW_VLAN_RX;
 	return err;
 }
 
@@ -2005,13 +1978,9 @@ static struct ethtool_ops cxgb_ethtool_ops = {
 	.set_eeprom        = set_eeprom,
 	.get_pauseparam    = get_pauseparam,
 	.set_pauseparam    = set_pauseparam,
-	.get_rx_csum       = get_rx_csum,
-	.set_rx_csum       = set_rx_csum,
-	.set_tx_csum       = ethtool_op_set_tx_ipv6_csum,
-	.set_sg            = ethtool_op_set_sg,
 	.get_link          = ethtool_op_get_link,
 	.get_strings       = get_strings,
-	.phys_id           = identify_port,
+	.set_phys_id       = identify_port,
 	.nway_reset        = restart_autoneg,
 	.get_sset_count    = get_sset_count,
 	.get_ethtool_stats = get_stats,
@@ -2019,8 +1988,6 @@ static struct ethtool_ops cxgb_ethtool_ops = {
 	.get_regs          = get_regs,
 	.get_wol           = get_wol,
 	.set_wol           = set_wol,
-	.set_tso           = set_tso,
-	.set_flags         = set_flags,
 	.get_rxnfc         = get_rxnfc,
 	.get_rxfh_indir    = get_rss_table,
 	.set_rxfh_indir    = set_rss_table,
@@ -2877,6 +2844,7 @@ static const struct net_device_ops cxgb4_netdev_ops = {
 	.ndo_get_stats64      = cxgb_get_stats,
 	.ndo_set_rx_mode      = cxgb_set_rxmode,
 	.ndo_set_mac_address  = cxgb_set_mac_addr,
+	.ndo_set_features     = cxgb_set_features,
 	.ndo_validate_addr    = eth_validate_addr,
 	.ndo_do_ioctl         = cxgb_ioctl,
 	.ndo_change_mtu       = cxgb_change_mtu,
@@ -3559,6 +3527,7 @@ static void free_some_resources(struct adapter *adapter)
 		t4_fw_bye(adapter, adapter->fn);
 }
 
+#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
 #define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | TSO_FLAGS | \
 		   NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA)
 
@@ -3660,14 +3629,14 @@ static int __devinit init_one(struct pci_dev *pdev,
 		pi = netdev_priv(netdev);
 		pi->adapter = adapter;
 		pi->xact_addr_filt = -1;
-		pi->rx_offload = RX_CSO;
 		pi->port_id = i;
 		netdev->irq = pdev->irq;
 
-		netdev->features |= NETIF_F_SG | TSO_FLAGS;
-		netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-		netdev->features |= NETIF_F_GRO | NETIF_F_RXHASH | highdma;
-		netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+		netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
+			NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+			NETIF_F_RXCSUM | NETIF_F_RXHASH |
+			NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+		netdev->features |= netdev->hw_features | highdma;
 		netdev->vlan_features = netdev->features & VLAN_FEAT;
 
 		netdev->netdev_ops = &cxgb4_netdev_ops;
diff --git a/drivers/net/cxgb4/sge.c b/drivers/net/cxgb4/sge.c
index 311471b439a..75a4b0fa19e 100644
--- a/drivers/net/cxgb4/sge.c
+++ b/drivers/net/cxgb4/sge.c
@@ -1556,7 +1556,6 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
 {
 	bool csum_ok;
 	struct sk_buff *skb;
-	struct port_info *pi;
 	const struct cpl_rx_pkt *pkt;
 	struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
 
@@ -1584,10 +1583,9 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
 	if (skb->dev->features & NETIF_F_RXHASH)
 		skb->rxhash = (__force u32)pkt->rsshdr.hash_val;
 
-	pi = netdev_priv(skb->dev);
 	rxq->stats.pkts++;
 
-	if (csum_ok && (pi->rx_offload & RX_CSO) &&
+	if (csum_ok && (q->netdev->features & NETIF_F_RXCSUM) &&
 	    (pkt->l2info & htonl(RXF_UDP | RXF_TCP))) {
 		if (!pkt->ip_frag) {
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/cxgb4/t4_hw.c
index b9fd8a6f2cc..d1ec111aebd 100644
--- a/drivers/net/cxgb4/t4_hw.c
+++ b/drivers/net/cxgb4/t4_hw.c
@@ -883,7 +883,7 @@ struct intr_info {
  *
  *	A table driven interrupt handler that applies a set of masks to an
  *	interrupt status word and performs the corresponding actions if the
- *	interrupts described by the mask have occured.  The actions include
+ *	interrupts described by the mask have occurred.  The actions include
  *	optionally emitting a warning or alert message.  The table is terminated
  *	by an entry specifying mask 0.  Returns the number of fatal interrupt
  *	conditions.
diff --git a/drivers/net/cxgb4vf/adapter.h b/drivers/net/cxgb4vf/adapter.h
index 4766b4116b4..4fd821aadc8 100644
--- a/drivers/net/cxgb4vf/adapter.h
+++ b/drivers/net/cxgb4vf/adapter.h
@@ -97,17 +97,11 @@ struct port_info {
 	u16 rss_size;			/* size of VI's RSS table slice */
 	u8 pidx;			/* index into adapter port[] */
 	u8 port_id;			/* physical port ID */
-	u8 rx_offload;			/* CSO, etc. */
 	u8 nqsets;			/* # of "Queue Sets" */
 	u8 first_qset;			/* index of first "Queue Set" */
 	struct link_config link_cfg;	/* physical port configuration */
 };
 
-/* port_info.rx_offload flags */
-enum {
-	RX_CSO = 1 << 0,
-};
-
 /*
  * Scatter Gather Engine resources for the "adapter".  Our ingress and egress
  * queues are organized into "Queue Sets" with one ingress and one egress
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 6aad64df4dc..e71c08e547e 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -1167,7 +1167,8 @@ static int cxgb4vf_get_settings(struct net_device *dev,
 
 	cmd->supported = pi->link_cfg.supported;
 	cmd->advertising = pi->link_cfg.advertising;
-	cmd->speed = netif_carrier_ok(dev) ? pi->link_cfg.speed : -1;
+	ethtool_cmd_speed_set(cmd,
+			      netif_carrier_ok(dev) ? pi->link_cfg.speed : -1);
 	cmd->duplex = DUPLEX_FULL;
 
 	cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
@@ -1326,37 +1327,22 @@ static void cxgb4vf_get_pauseparam(struct net_device *dev,
 }
 
 /*
- * Return whether RX Checksum Offloading is currently enabled for the device.
- */
-static u32 cxgb4vf_get_rx_csum(struct net_device *dev)
-{
-	struct port_info *pi = netdev_priv(dev);
-
-	return (pi->rx_offload & RX_CSO) != 0;
-}
-
-/*
- * Turn RX Checksum Offloading on or off for the device.
+ * Identify the port by blinking the port's LED.
  */
-static int cxgb4vf_set_rx_csum(struct net_device *dev, u32 csum)
+static int cxgb4vf_phys_id(struct net_device *dev,
+			   enum ethtool_phys_id_state state)
 {
+	unsigned int val;
 	struct port_info *pi = netdev_priv(dev);
 
-	if (csum)
-		pi->rx_offload |= RX_CSO;
+	if (state == ETHTOOL_ID_ACTIVE)
+		val = 0xffff;
+	else if (state == ETHTOOL_ID_INACTIVE)
+		val = 0;
 	else
-		pi->rx_offload &= ~RX_CSO;
-	return 0;
-}
-
-/*
- * Identify the port by blinking the port's LED.
- */
-static int cxgb4vf_phys_id(struct net_device *dev, u32 id)
-{
-	struct port_info *pi = netdev_priv(dev);
+		return -EINVAL;
 
-	return t4vf_identify_port(pi->adapter, pi->viid, 5);
+	return t4vf_identify_port(pi->adapter, pi->viid, val);
 }
 
 /*
@@ -1560,18 +1546,6 @@ static void cxgb4vf_get_wol(struct net_device *dev,
  */
 #define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
 
-/*
- * Set TCP Segmentation Offloading feature capabilities.
- */
-static int cxgb4vf_set_tso(struct net_device *dev, u32 tso)
-{
-	if (tso)
-		dev->features |= TSO_FLAGS;
-	else
-		dev->features &= ~TSO_FLAGS;
-	return 0;
-}
-
 static struct ethtool_ops cxgb4vf_ethtool_ops = {
 	.get_settings		= cxgb4vf_get_settings,
 	.get_drvinfo		= cxgb4vf_get_drvinfo,
@@ -1582,19 +1556,14 @@ static struct ethtool_ops cxgb4vf_ethtool_ops = {
 	.get_coalesce		= cxgb4vf_get_coalesce,
 	.set_coalesce		= cxgb4vf_set_coalesce,
 	.get_pauseparam		= cxgb4vf_get_pauseparam,
-	.get_rx_csum		= cxgb4vf_get_rx_csum,
-	.set_rx_csum		= cxgb4vf_set_rx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_ipv6_csum,
-	.set_sg			= ethtool_op_set_sg,
 	.get_link		= ethtool_op_get_link,
 	.get_strings		= cxgb4vf_get_strings,
-	.phys_id		= cxgb4vf_phys_id,
+	.set_phys_id		= cxgb4vf_phys_id,
 	.get_sset_count		= cxgb4vf_get_sset_count,
 	.get_ethtool_stats	= cxgb4vf_get_ethtool_stats,
 	.get_regs_len		= cxgb4vf_get_regs_len,
 	.get_regs		= cxgb4vf_get_regs,
 	.get_wol		= cxgb4vf_get_wol,
-	.set_tso		= cxgb4vf_set_tso,
 };
 
 /*
@@ -2629,19 +2598,19 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		 * it.
 		 */
 		pi->xact_addr_filt = -1;
-		pi->rx_offload = RX_CSO;
 		netif_carrier_off(netdev);
 		netdev->irq = pdev->irq;
 
-		netdev->features = (NETIF_F_SG | TSO_FLAGS |
-				    NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-				    NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
-				    NETIF_F_GRO);
+		netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
+			NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+			NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
+		netdev->vlan_features = NETIF_F_SG | TSO_FLAGS |
+			NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+			NETIF_F_HIGHDMA;
+		netdev->features = netdev->hw_features |
+			NETIF_F_HW_VLAN_RX;
 		if (pci_using_dac)
 			netdev->features |= NETIF_F_HIGHDMA;
-		netdev->vlan_features =
-			(netdev->features &
-			 ~(NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX));
 
 #ifdef HAVE_NET_DEVICE_OPS
 		netdev->netdev_ops = &cxgb4vf_netdev_ops;
@@ -2738,7 +2707,7 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 	cfg_queues(adapter);
 
 	/*
-	 * Print a short notice on the existance and configuration of the new
+	 * Print a short notice on the existence and configuration of the new
 	 * VF network device ...
 	 */
 	for_each_port(adapter, pidx) {
diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c
index e0b3d1bc2fd..5182960e29f 100644
--- a/drivers/net/cxgb4vf/sge.c
+++ b/drivers/net/cxgb4vf/sge.c
@@ -224,8 +224,8 @@ static inline bool is_buf_mapped(const struct rx_sw_desc *sdesc)
 /**
  *	need_skb_unmap - does the platform need unmapping of sk_buffs?
  *
- *	Returns true if the platfrom needs sk_buff unmapping.  The compiler
- *	optimizes away unecessary code if this returns true.
+ *	Returns true if the platform needs sk_buff unmapping.  The compiler
+ *	optimizes away unnecessary code if this returns true.
  */
 static inline int need_skb_unmap(void)
 {
@@ -267,7 +267,7 @@ static inline unsigned int fl_cap(const struct sge_fl *fl)
  *
  *	Tests specified Free List to see whether the number of buffers
  *	available to the hardware has falled below our "starvation"
- *	threshhold.
+ *	threshold.
  */
 static inline bool fl_starving(const struct sge_fl *fl)
 {
@@ -1149,7 +1149,7 @@ int t4vf_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(credits < ETHTXQ_STOP_THRES)) {
 		/*
 		 * After we're done injecting the Work Request for this
-		 * packet, we'll be below our "stop threshhold" so stop the TX
+		 * packet, we'll be below our "stop threshold" so stop the TX
 		 * Queue now and schedule a request for an SGE Egress Queue
 		 * Update message.  The queue will get started later on when
 		 * the firmware processes this Work Request and sends us an
@@ -1555,8 +1555,8 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
 	pi = netdev_priv(skb->dev);
 	rxq->stats.pkts++;
 
-	if (csum_ok && (pi->rx_offload & RX_CSO) && !pkt->err_vec &&
-	    (be32_to_cpu(pkt->l2info) & (RXF_UDP|RXF_TCP))) {
+	if (csum_ok && (rspq->netdev->features & NETIF_F_RXCSUM) &&
+	    !pkt->err_vec && (be32_to_cpu(pkt->l2info) & (RXF_UDP|RXF_TCP))) {
 		if (!pkt->ip_frag)
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		else {
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index baca6bfcb08..807b6bb200e 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -94,14 +94,14 @@ MODULE_VERSION(EMAC_MODULE_VERSION);
 static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 
 /* Configuration items */
-#define EMAC_DEF_PASS_CRC		(0) /* Do not pass CRC upto frames */
+#define EMAC_DEF_PASS_CRC		(0) /* Do not pass CRC up to frames */
 #define EMAC_DEF_QOS_EN			(0) /* EMAC proprietary QoS disabled */
 #define EMAC_DEF_NO_BUFF_CHAIN		(0) /* No buffer chain */
 #define EMAC_DEF_MACCTRL_FRAME_EN	(0) /* Discard Maccontrol frames */
 #define EMAC_DEF_SHORT_FRAME_EN		(0) /* Discard short frames */
 #define EMAC_DEF_ERROR_FRAME_EN		(0) /* Discard error frames */
-#define EMAC_DEF_PROM_EN		(0) /* Promiscous disabled */
-#define EMAC_DEF_PROM_CH		(0) /* Promiscous channel is 0 */
+#define EMAC_DEF_PROM_EN		(0) /* Promiscuous disabled */
+#define EMAC_DEF_PROM_CH		(0) /* Promiscuous channel is 0 */
 #define EMAC_DEF_BCAST_EN		(1) /* Broadcast enabled */
 #define EMAC_DEF_BCAST_CH		(0) /* Broadcast channel is 0 */
 #define EMAC_DEF_MCAST_EN		(1) /* Multicast enabled */
@@ -1013,7 +1013,7 @@ static void emac_rx_handler(void *token, int len, int status)
 		return;
 	}
 
-	/* recycle on recieve error */
+	/* recycle on receive error */
 	if (status < 0) {
 		ndev->stats.rx_errors++;
 		goto recycle;
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 8b0084d17c8..17654059922 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -331,18 +331,18 @@ static struct {
                          "DE422",\
                          ""}
 
-static char* __initdata depca_signature[] = DEPCA_SIGNATURE;
+static const char* const depca_signature[] __devinitconst = DEPCA_SIGNATURE;
 
 enum depca_type {
 	DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown
 };
 
-static char depca_string[] = "depca";
+static const char depca_string[] = "depca";
 
 static int depca_device_remove (struct device *device);
 
 #ifdef CONFIG_EISA
-static struct eisa_device_id depca_eisa_ids[] = {
+static const struct eisa_device_id depca_eisa_ids[] __devinitconst = {
 	{ "DEC4220", de422 },
 	{ "" }
 };
@@ -367,19 +367,19 @@ static struct eisa_driver depca_eisa_driver = {
 #define DE210_ID 0x628d
 #define DE212_ID 0x6def
 
-static short depca_mca_adapter_ids[] = {
+static const short depca_mca_adapter_ids[] __devinitconst = {
 	DE210_ID,
 	DE212_ID,
 	0x0000
 };
 
-static char *depca_mca_adapter_name[] = {
+static const char *depca_mca_adapter_name[] = {
 	"DEC EtherWORKS MC Adapter (DE210)",
 	"DEC EtherWORKS MC Adapter (DE212)",
 	NULL
 };
 
-static enum depca_type depca_mca_adapter_type[] = {
+static const enum depca_type depca_mca_adapter_type[] = {
 	de210,
 	de212,
 	0
@@ -541,10 +541,9 @@ static void SetMulticastFilter(struct net_device *dev);
 static int load_packet(struct net_device *dev, struct sk_buff *skb);
 static void depca_dbg_open(struct net_device *dev);
 
-static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 };
-static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 };
-static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 };
-static u_char *depca_irq;
+static const u_char de1xx_irq[] __devinitconst = { 2, 3, 4, 5, 7, 9, 0 };
+static const u_char de2xx_irq[] __devinitconst = { 5, 9, 10, 11, 15, 0 };
+static const u_char de422_irq[] __devinitconst = { 5, 9, 10, 11, 0 };
 
 static int irq;
 static int io;
@@ -580,7 +579,7 @@ static const struct net_device_ops depca_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-static int __init depca_hw_init (struct net_device *dev, struct device *device)
+static int __devinit depca_hw_init (struct net_device *dev, struct device *device)
 {
 	struct depca_private *lp;
 	int i, j, offset, netRAM, mem_len, status = 0;
@@ -748,6 +747,7 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
 	if (dev->irq < 2) {
 		unsigned char irqnum;
 		unsigned long irq_mask, delay;
+		const u_char *depca_irq;
 
 		irq_mask = probe_irq_on();
 
@@ -770,6 +770,7 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
 			break;
 
 		default:
+			depca_irq = NULL;
 			break;	/* Not reached */
 		}
 
@@ -1302,7 +1303,7 @@ static void SetMulticastFilter(struct net_device *dev)
 	}
 }
 
-static int __init depca_common_init (u_long ioaddr, struct net_device **devp)
+static int __devinit depca_common_init (u_long ioaddr, struct net_device **devp)
 {
 	int status = 0;
 
@@ -1333,7 +1334,7 @@ static int __init depca_common_init (u_long ioaddr, struct net_device **devp)
 /*
 ** Microchannel bus I/O device probe
 */
-static int __init depca_mca_probe(struct device *device)
+static int __devinit depca_mca_probe(struct device *device)
 {
 	unsigned char pos[2];
 	unsigned char where;
@@ -1457,7 +1458,7 @@ static int __init depca_mca_probe(struct device *device)
 ** ISA bus I/O device probe
 */
 
-static void __init depca_platform_probe (void)
+static void __devinit depca_platform_probe (void)
 {
 	int i;
 	struct platform_device *pldev;
@@ -1497,7 +1498,7 @@ static void __init depca_platform_probe (void)
 	}
 }
 
-static enum depca_type __init depca_shmem_probe (ulong *mem_start)
+static enum depca_type __devinit depca_shmem_probe (ulong *mem_start)
 {
 	u_long mem_base[] = DEPCA_RAM_BASE_ADDRESSES;
 	enum depca_type adapter = unknown;
@@ -1558,7 +1559,7 @@ static int __devinit depca_isa_probe (struct platform_device *device)
 */
 
 #ifdef CONFIG_EISA
-static int __init depca_eisa_probe (struct device *device)
+static int __devinit depca_eisa_probe (struct device *device)
 {
 	enum depca_type adapter = unknown;
 	struct eisa_device *edev;
@@ -1629,7 +1630,7 @@ static int __devexit depca_device_remove (struct device *device)
 ** and Boot (readb) ROM. This will also give us a clue to the network RAM
 ** base address.
 */
-static int __init DepcaSignature(char *name, u_long base_addr)
+static int __devinit DepcaSignature(char *name, u_long base_addr)
 {
 	u_int i, j, k;
 	void __iomem *ptr;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index c05db604605..c445457b66d 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -1189,10 +1189,10 @@ static int rio_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cmd->transceiver = XCVR_INTERNAL;
 	}
 	if ( np->link_status ) {
-		cmd->speed = np->speed;
+		ethtool_cmd_speed_set(cmd, np->speed);
 		cmd->duplex = np->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
 	} else {
-		cmd->speed = -1;
+		ethtool_cmd_speed_set(cmd, -1);
 		cmd->duplex = -1;
 	}
 	if ( np->an_enable)
@@ -1219,31 +1219,20 @@ static int rio_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	} else {
 		np->an_enable = 0;
 		if (np->speed == 1000) {
-			cmd->speed = SPEED_100;
+			ethtool_cmd_speed_set(cmd, SPEED_100);
 			cmd->duplex = DUPLEX_FULL;
 			printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex.\n");
 		}
-		switch(cmd->speed + cmd->duplex) {
-
-		case SPEED_10 + DUPLEX_HALF:
-			np->speed = 10;
-			np->full_duplex = 0;
-			break;
-
-		case SPEED_10 + DUPLEX_FULL:
+		switch (ethtool_cmd_speed(cmd)) {
+		case SPEED_10:
 			np->speed = 10;
-			np->full_duplex = 1;
+			np->full_duplex = (cmd->duplex == DUPLEX_FULL);
 			break;
-		case SPEED_100 + DUPLEX_HALF:
+		case SPEED_100:
 			np->speed = 100;
-			np->full_duplex = 0;
-			break;
-		case SPEED_100 + DUPLEX_FULL:
-			np->speed = 100;
-			np->full_duplex = 1;
+			np->full_duplex = (cmd->duplex == DUPLEX_FULL);
 			break;
-		case SPEED_1000 + DUPLEX_HALF:/* not supported */
-		case SPEED_1000 + DUPLEX_FULL:/* not supported */
+		case SPEED_1000: /* not supported */
 		default:
 			return -EINVAL;
 		}
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index b7af5bab993..fbaff3584bd 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -131,8 +131,6 @@ typedef struct board_info {
 	u32		msg_enable;
 	u32		wake_state;
 
-	int		rx_csum;
-	int		can_csum;
 	int		ip_summed;
 } board_info_t;
 
@@ -470,47 +468,20 @@ static int dm9000_nway_reset(struct net_device *dev)
 	return mii_nway_restart(&dm->mii);
 }
 
-static uint32_t dm9000_get_rx_csum(struct net_device *dev)
+static int dm9000_set_features(struct net_device *dev, u32 features)
 {
 	board_info_t *dm = to_dm9000_board(dev);
-	return dm->rx_csum;
-}
-
-static int dm9000_set_rx_csum_unlocked(struct net_device *dev, uint32_t data)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-
-	if (dm->can_csum) {
-		dm->rx_csum = data;
-		iow(dm, DM9000_RCSR, dm->rx_csum ? RCSR_CSUM : 0);
+	u32 changed = dev->features ^ features;
+	unsigned long flags;
 
+	if (!(changed & NETIF_F_RXCSUM))
 		return 0;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-static int dm9000_set_rx_csum(struct net_device *dev, uint32_t data)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-	unsigned long flags;
-	int ret;
 
 	spin_lock_irqsave(&dm->lock, flags);
-	ret = dm9000_set_rx_csum_unlocked(dev, data);
+	iow(dm, DM9000_RCSR, (features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0);
 	spin_unlock_irqrestore(&dm->lock, flags);
 
-	return ret;
-}
-
-static int dm9000_set_tx_csum(struct net_device *dev, uint32_t data)
-{
-	board_info_t *dm = to_dm9000_board(dev);
-	int ret = -EOPNOTSUPP;
-
-	if (dm->can_csum)
-		ret = ethtool_op_set_tx_csum(dev, data);
-	return ret;
+	return 0;
 }
 
 static u32 dm9000_get_link(struct net_device *dev)
@@ -643,10 +614,6 @@ static const struct ethtool_ops dm9000_ethtool_ops = {
  	.get_eeprom_len		= dm9000_get_eeprom_len,
  	.get_eeprom		= dm9000_get_eeprom,
  	.set_eeprom		= dm9000_set_eeprom,
-	.get_rx_csum		= dm9000_get_rx_csum,
-	.set_rx_csum		= dm9000_set_rx_csum,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= dm9000_set_tx_csum,
 };
 
 static void dm9000_show_carrier(board_info_t *db,
@@ -800,7 +767,9 @@ dm9000_init_dm9000(struct net_device *dev)
 	db->io_mode = ior(db, DM9000_ISR) >> 6;	/* ISR bit7:6 keeps I/O mode */
 
 	/* Checksum mode */
-	dm9000_set_rx_csum_unlocked(dev, db->rx_csum);
+	if (dev->hw_features & NETIF_F_RXCSUM)
+		iow(db, DM9000_RCSR,
+			(dev->features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0);
 
 	iow(db, DM9000_GPCR, GPCR_GEP_CNTL);	/* Let GPIO0 output */
 
@@ -1049,7 +1018,7 @@ dm9000_rx(struct net_device *dev)
 
 			/* Pass to upper layer */
 			skb->protocol = eth_type_trans(skb, dev);
-			if (db->rx_csum) {
+			if (dev->features & NETIF_F_RXCSUM) {
 				if ((((rxbyte & 0x1c) << 3) & rxbyte) == 0)
 					skb->ip_summed = CHECKSUM_UNNECESSARY;
 				else
@@ -1358,6 +1327,7 @@ static const struct net_device_ops dm9000_netdev_ops = {
 	.ndo_set_multicast_list	= dm9000_hash_table,
 	.ndo_do_ioctl		= dm9000_ioctl,
 	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_features	= dm9000_set_features,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1551,9 +1521,8 @@ dm9000_probe(struct platform_device *pdev)
 
 	/* dm9000a/b are capable of hardware checksum offload */
 	if (db->type == TYPE_DM9000A || db->type == TYPE_DM9000B) {
-		db->can_csum = 1;
-		db->rx_csum = 1;
-		ndev->features |= NETIF_F_IP_CSUM;
+		ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
+		ndev->features |= ndev->hw_features;
 	}
 
 	/* from this point we assume that we have found a DM9000 */
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index ff2d29b1785..39cf9b9bd67 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -168,10 +168,6 @@ static int __init dummy_init_one(void)
 	if (!dev_dummy)
 		return -ENOMEM;
 
-	err = dev_alloc_name(dev_dummy, dev_dummy->name);
-	if (err < 0)
-		goto err;
-
 	dev_dummy->rtnl_link_ops = &dummy_link_ops;
 	err = register_netdevice(dev_dummy);
 	if (err < 0)
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index b0aa9e68990..e336c7937f0 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -593,7 +593,6 @@ struct nic {
 	enum phy phy;
 	struct params params;
 	struct timer_list watchdog;
-	struct timer_list blink_timer;
 	struct mii_if_info mii;
 	struct work_struct tx_timeout_task;
 	enum loopback loopback;
@@ -618,7 +617,6 @@ struct nic {
 	u32 rx_tco_frames;
 	u32 rx_over_length_errors;
 
-	u16 leds;
 	u16 eeprom_wc;
 	__le16 eeprom[256];
 	spinlock_t mdio_lock;
@@ -1512,7 +1510,7 @@ static int e100_phy_init(struct nic *nic)
 
 static int e100_hw_init(struct nic *nic)
 {
-	int err;
+	int err = 0;
 
 	e100_hw_reset(nic);
 
@@ -1668,7 +1666,8 @@ static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
 static void e100_watchdog(unsigned long data)
 {
 	struct nic *nic = (struct nic *)data;
-	struct ethtool_cmd cmd;
+	struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
+	u32 speed;
 
 	netif_printk(nic, timer, KERN_DEBUG, nic->netdev,
 		     "right now = %ld\n", jiffies);
@@ -1676,10 +1675,11 @@ static void e100_watchdog(unsigned long data)
 	/* mii library handles link maintenance tasks */
 
 	mii_ethtool_gset(&nic->mii, &cmd);
+	speed = ethtool_cmd_speed(&cmd);
 
 	if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
 		netdev_info(nic->netdev, "NIC Link is Up %u Mbps %s Duplex\n",
-			    cmd.speed == SPEED_100 ? 100 : 10,
+			    speed == SPEED_100 ? 100 : 10,
 			    cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
 	} else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
 		netdev_info(nic->netdev, "NIC Link is Down\n");
@@ -1698,13 +1698,13 @@ static void e100_watchdog(unsigned long data)
 	spin_unlock_irq(&nic->cmd_lock);
 
 	e100_update_stats(nic);
-	e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
+	e100_adjust_adaptive_ifs(nic, speed, cmd.duplex);
 
 	if (nic->mac <= mac_82557_D100_C)
 		/* Issue a multicast command to workaround a 557 lock up */
 		e100_set_multicast_list(nic->netdev);
 
-	if (nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
+	if (nic->flags & ich && speed == SPEED_10 && cmd.duplex == DUPLEX_HALF)
 		/* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
 		nic->flags |= ich_10h_workaround;
 	else
@@ -2351,30 +2351,6 @@ err_clean_rx:
 #define E100_82552_LED_OVERRIDE 0x19
 #define E100_82552_LED_ON       0x000F /* LEDTX and LED_RX both on */
 #define E100_82552_LED_OFF      0x000A /* LEDTX and LED_RX both off */
-static void e100_blink_led(unsigned long data)
-{
-	struct nic *nic = (struct nic *)data;
-	enum led_state {
-		led_on     = 0x01,
-		led_off    = 0x04,
-		led_on_559 = 0x05,
-		led_on_557 = 0x07,
-	};
-	u16 led_reg = MII_LED_CONTROL;
-
-	if (nic->phy == phy_82552_v) {
-		led_reg = E100_82552_LED_OVERRIDE;
-
-		nic->leds = (nic->leds == E100_82552_LED_ON) ?
-		            E100_82552_LED_OFF : E100_82552_LED_ON;
-	} else {
-		nic->leds = (nic->leds & led_on) ? led_off :
-		            (nic->mac < mac_82559_D101M) ? led_on_557 :
-		            led_on_559;
-	}
-	mdio_write(nic->netdev, nic->mii.phy_id, led_reg, nic->leds);
-	mod_timer(&nic->blink_timer, jiffies + HZ / 4);
-}
 
 static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
 {
@@ -2598,19 +2574,38 @@ static void e100_diag_test(struct net_device *netdev,
 	msleep_interruptible(4 * 1000);
 }
 
-static int e100_phys_id(struct net_device *netdev, u32 data)
+static int e100_set_phys_id(struct net_device *netdev,
+			    enum ethtool_phys_id_state state)
 {
 	struct nic *nic = netdev_priv(netdev);
+	enum led_state {
+		led_on     = 0x01,
+		led_off    = 0x04,
+		led_on_559 = 0x05,
+		led_on_557 = 0x07,
+	};
 	u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE :
-	              MII_LED_CONTROL;
+		MII_LED_CONTROL;
+	u16 leds = 0;
 
-	if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-		data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
-	mod_timer(&nic->blink_timer, jiffies);
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&nic->blink_timer);
-	mdio_write(netdev, nic->mii.phy_id, led_reg, 0);
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 2;
+
+	case ETHTOOL_ID_ON:
+		leds = (nic->phy == phy_82552_v) ? E100_82552_LED_ON :
+		       (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559;
+		break;
+
+	case ETHTOOL_ID_OFF:
+		leds = (nic->phy == phy_82552_v) ? E100_82552_LED_OFF : led_off;
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		break;
+	}
 
+	mdio_write(netdev, nic->mii.phy_id, led_reg, leds);
 	return 0;
 }
 
@@ -2691,7 +2686,7 @@ static const struct ethtool_ops e100_ethtool_ops = {
 	.set_ringparam		= e100_set_ringparam,
 	.self_test		= e100_diag_test,
 	.get_strings		= e100_get_strings,
-	.phys_id		= e100_phys_id,
+	.set_phys_id		= e100_set_phys_id,
 	.get_ethtool_stats	= e100_get_ethtool_stats,
 	.get_sset_count		= e100_get_sset_count,
 };
@@ -2832,9 +2827,6 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 	init_timer(&nic->watchdog);
 	nic->watchdog.function = e100_watchdog;
 	nic->watchdog.data = (unsigned long)nic;
-	init_timer(&nic->blink_timer);
-	nic->blink_timer.function = e100_blink_led;
-	nic->blink_timer.data = (unsigned long)nic;
 
 	INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
 
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index a881dd0093b..8676899120c 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -238,9 +238,6 @@ struct e1000_adapter {
 	struct work_struct reset_task;
 	u8 fc_autoneg;
 
-	struct timer_list blink_timer;
-	unsigned long led_status;
-
 	/* TX */
 	struct e1000_tx_ring *tx_ring;      /* One per active queue */
 	unsigned int restart_queue;
@@ -349,7 +346,7 @@ extern int e1000_up(struct e1000_adapter *adapter);
 extern void e1000_down(struct e1000_adapter *adapter);
 extern void e1000_reinit_locked(struct e1000_adapter *adapter);
 extern void e1000_reset(struct e1000_adapter *adapter);
-extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx);
 extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index f4d0922ec65..ec0fa426cce 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -158,9 +158,9 @@ static int e1000_get_settings(struct net_device *netdev,
 
 		e1000_get_speed_and_duplex(hw, &adapter->link_speed,
 		                                   &adapter->link_duplex);
-		ecmd->speed = adapter->link_speed;
+		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 
-		/* unfortunatly FULL_DUPLEX != DUPLEX_FULL
+		/* unfortunately FULL_DUPLEX != DUPLEX_FULL
 		 *          and HALF_DUPLEX != DUPLEX_HALF */
 
 		if (adapter->link_duplex == FULL_DUPLEX)
@@ -168,7 +168,7 @@ static int e1000_get_settings(struct net_device *netdev,
 		else
 			ecmd->duplex = DUPLEX_HALF;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -197,11 +197,13 @@ static int e1000_set_settings(struct net_device *netdev,
 			                         ADVERTISED_TP |
 			                         ADVERTISED_Autoneg;
 		ecmd->advertising = hw->autoneg_advertised;
-	} else
-		if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+	} else {
+		u32 speed = ethtool_cmd_speed(ecmd);
+		if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
 			clear_bit(__E1000_RESETTING, &adapter->flags);
 			return -EINVAL;
 		}
+	}
 
 	/* reset the link */
 
@@ -1753,46 +1755,28 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
-/* toggle LED 4 times per second = 2 "blinks" per second */
-#define E1000_ID_INTERVAL	(HZ/4)
-
-/* bit defines for adapter->led_status */
-#define E1000_LED_ON		0
-
-static void e1000_led_blink_callback(unsigned long data)
+static int e1000_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
 {
-	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
-	if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
-		e1000_led_off(hw);
-	else
-		e1000_led_on(hw);
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		e1000_setup_led(hw);
+		return 2;
 
-	mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
-}
-
-static int e1000_phys_id(struct net_device *netdev, u32 data)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
+	case ETHTOOL_ID_ON:
+		e1000_led_on(hw);
+		break;
 
-	if (!data)
-		data = INT_MAX;
+	case ETHTOOL_ID_OFF:
+		e1000_led_off(hw);
+		break;
 
-	if (!adapter->blink_timer.function) {
-		init_timer(&adapter->blink_timer);
-		adapter->blink_timer.function = e1000_led_blink_callback;
-		adapter->blink_timer.data = (unsigned long)adapter;
+	case ETHTOOL_ID_INACTIVE:
+		e1000_cleanup_led(hw);
 	}
-	e1000_setup_led(hw);
-	mod_timer(&adapter->blink_timer, jiffies);
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&adapter->blink_timer);
-
-	e1000_led_off(hw);
-	clear_bit(E1000_LED_ON, &adapter->led_status);
-	e1000_cleanup_led(hw);
 
 	return 0;
 }
@@ -1929,7 +1913,7 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.set_tso                = e1000_set_tso,
 	.self_test              = e1000_diag_test,
 	.get_strings            = e1000_get_strings,
-	.phys_id                = e1000_phys_id,
+	.set_phys_id            = e1000_set_phys_id,
 	.get_ethtool_stats      = e1000_get_ethtool_stats,
 	.get_sset_count         = e1000_get_sset_count,
 	.get_coalesce           = e1000_get_coalesce,
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index c70b23d5228..5c9a8403668 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1026,7 +1026,7 @@ extern void __iomem *ce4100_gbe_mdio_base_virt;
 
 #define E1000_KUMCTRLSTA 0x00034	/* MAC-PHY interface - RW */
 #define E1000_MDPHYA     0x0003C	/* PHY address - RW */
-#define E1000_MANC2H     0x05860	/* Managment Control To Host - RW */
+#define E1000_MANC2H     0x05860	/* Management Control To Host - RW */
 #define E1000_SW_FW_SYNC 0x05B5C	/* Software-Firmware Synchronization - RW */
 
 #define E1000_GCR       0x05B00	/* PCI-Ex Control */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index bfab14092d2..c18cb8e883d 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -96,7 +96,6 @@ int e1000_up(struct e1000_adapter *adapter);
 void e1000_down(struct e1000_adapter *adapter);
 void e1000_reinit_locked(struct e1000_adapter *adapter);
 void e1000_reset(struct e1000_adapter *adapter);
-int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
@@ -205,7 +204,7 @@ static struct pci_driver e1000_driver = {
 	.probe    = e1000_probe,
 	.remove   = __devexit_p(e1000_remove),
 #ifdef CONFIG_PM
-	/* Power Managment Hooks */
+	/* Power Management Hooks */
 	.suspend  = e1000_suspend,
 	.resume   = e1000_resume,
 #endif
@@ -4385,7 +4384,6 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 	struct mii_ioctl_data *data = if_mii(ifr);
 	int retval;
 	u16 mii_reg;
-	u16 spddplx;
 	unsigned long flags;
 
 	if (hw->media_type != e1000_media_type_copper)
@@ -4424,17 +4422,18 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 					hw->autoneg = 1;
 					hw->autoneg_advertised = 0x2F;
 				} else {
+					u32 speed;
 					if (mii_reg & 0x40)
-						spddplx = SPEED_1000;
+						speed = SPEED_1000;
 					else if (mii_reg & 0x2000)
-						spddplx = SPEED_100;
+						speed = SPEED_100;
 					else
-						spddplx = SPEED_10;
-					spddplx += (mii_reg & 0x100)
-						   ? DUPLEX_FULL :
-						   DUPLEX_HALF;
-					retval = e1000_set_spd_dplx(adapter,
-								    spddplx);
+						speed = SPEED_10;
+					retval = e1000_set_spd_dplx(
+						adapter, speed,
+						((mii_reg & 0x100)
+						 ? DUPLEX_FULL :
+						 DUPLEX_HALF));
 					if (retval)
 						return retval;
 				}
@@ -4596,20 +4595,24 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter)
 	}
 }
 
-int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
 {
 	struct e1000_hw *hw = &adapter->hw;
 
 	hw->autoneg = 0;
 
+	/* Make sure dplx is at most 1 bit and lsb of speed is not set
+	 * for the switch() below to work */
+	if ((spd & 1) || (dplx & ~1))
+		goto err_inval;
+
 	/* Fiber NICs only allow 1000 gbps Full duplex */
 	if ((hw->media_type == e1000_media_type_fiber) &&
-		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-		e_err(probe, "Unsupported Speed/Duplex configuration\n");
-		return -EINVAL;
-	}
+	    spd != SPEED_1000 &&
+	    dplx != DUPLEX_FULL)
+		goto err_inval;
 
-	switch (spddplx) {
+	switch (spd + dplx) {
 	case SPEED_10 + DUPLEX_HALF:
 		hw->forced_speed_duplex = e1000_10_half;
 		break;
@@ -4628,10 +4631,13 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
-		e_err(probe, "Unsupported Speed/Duplex configuration\n");
-		return -EINVAL;
+		goto err_inval;
 	}
 	return 0;
+
+err_inval:
+	e_err(probe, "Unsupported Speed/Duplex configuration\n");
+	return -EINVAL;
 }
 
 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 89a69035e53..8295f219243 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -300,6 +300,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 		func->set_lan_id = e1000_set_lan_id_single_port;
 		func->check_mng_mode = e1000e_check_mng_mode_generic;
 		func->led_on = e1000e_led_on_generic;
+		func->blink_led = e1000e_blink_led_generic;
 
 		/* FWSM register */
 		mac->has_fwsm = true;
@@ -320,6 +321,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 	default:
 		func->check_mng_mode = e1000e_check_mng_mode_generic;
 		func->led_on = e1000e_led_on_generic;
+		func->blink_led = e1000e_blink_led_generic;
 
 		/* FWSM register */
 		mac->has_fwsm = true;
@@ -431,9 +433,6 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
 	case e1000_82573:
 	case e1000_82574:
 	case e1000_82583:
-		/* Disable ASPM L0s due to hardware errata */
-		e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L0S);
-
 		if (pdev->device == E1000_DEV_ID_82573L) {
 			adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
 			adapter->max_hw_frame_size = DEFAULT_JUMBO;
@@ -594,7 +593,7 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
 
 		extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
 
-		msleep(2);
+		usleep_range(2000, 4000);
 		i++;
 	} while (i < MDIO_OWNERSHIP_TIMEOUT);
 
@@ -816,7 +815,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
 
 	/* Check for pending operations. */
 	for (i = 0; i < E1000_FLASH_UPDATES; i++) {
-		msleep(1);
+		usleep_range(1000, 2000);
 		if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
 			break;
 	}
@@ -840,7 +839,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
 	ew32(EECD, eecd);
 
 	for (i = 0; i < E1000_FLASH_UPDATES; i++) {
-		msleep(1);
+		usleep_range(1000, 2000);
 		if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
 			break;
 	}
@@ -930,7 +929,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
 		if (er32(EEMNGCTL) &
 		    E1000_NVM_CFG_DONE_PORT_0)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 		timeout--;
 	}
 	if (!timeout) {
@@ -1037,7 +1036,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 	ew32(TCTL, E1000_TCTL_PSP);
 	e1e_flush();
 
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	/*
 	 * Must acquire the MDIO ownership before MAC reset.
@@ -2066,7 +2065,8 @@ struct e1000_info e1000_82573_info = {
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_SWSM_ON_LOAD,
-	.flags2			= FLAG2_DISABLE_ASPM_L1,
+	.flags2			= FLAG2_DISABLE_ASPM_L1
+				  | FLAG2_DISABLE_ASPM_L0S,
 	.pba			= 20,
 	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_82571,
@@ -2086,7 +2086,8 @@ struct e1000_info e1000_82574_info = {
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
-	.flags2			  = FLAG2_CHECK_PHY_HANG,
+	.flags2			  = FLAG2_CHECK_PHY_HANG
+				  | FLAG2_DISABLE_ASPM_L0S,
 	.pba			= 32,
 	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
@@ -2104,6 +2105,7 @@ struct e1000_info e1000_82583_info = {
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
+	.flags2			= FLAG2_DISABLE_ASPM_L0S,
 	.pba			= 32,
 	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_82571,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 00bf595ebd6..9549879e66a 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -31,6 +31,7 @@
 #ifndef _E1000_H_
 #define _E1000_H_
 
+#include <linux/bitops.h>
 #include <linux/types.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
@@ -39,6 +40,7 @@
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
 #include <linux/crc32.h>
+#include <linux/if_vlan.h>
 
 #include "hw.h"
 
@@ -280,7 +282,7 @@ struct e1000_adapter {
 
 	const struct e1000_info *ei;
 
-	struct vlan_group *vlgrp;
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
 	u32 bd_number;
 	u32 rx_buffer_len;
 	u16 mng_vlan_id;
@@ -389,13 +391,10 @@ struct e1000_adapter {
 
 	bool fc_autoneg;
 
-	unsigned long led_status;
-
 	unsigned int flags;
 	unsigned int flags2;
 	struct work_struct downshift_task;
 	struct work_struct update_phy_task;
-	struct work_struct led_blink_task;
 	struct work_struct print_hang_task;
 
 	bool idle_check;
@@ -456,6 +455,7 @@ struct e1000_info {
 #define FLAG2_HAS_PHY_STATS               (1 << 4)
 #define FLAG2_HAS_EEE                     (1 << 5)
 #define FLAG2_DMA_BURST                   (1 << 6)
+#define FLAG2_DISABLE_ASPM_L0S            (1 << 7)
 #define FLAG2_DISABLE_AIM                 (1 << 8)
 #define FLAG2_CHECK_PHY_HANG              (1 << 9)
 
@@ -484,7 +484,6 @@ extern const char e1000e_driver_version[];
 
 extern void e1000e_check_options(struct e1000_adapter *adapter);
 extern void e1000e_set_ethtool_ops(struct net_device *netdev);
-extern void e1000e_led_blink_task(struct work_struct *work);
 
 extern int e1000e_up(struct e1000_adapter *adapter);
 extern void e1000e_down(struct e1000_adapter *adapter);
@@ -502,7 +501,6 @@ extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
 extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
 extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
 extern void e1000e_release_hw_control(struct e1000_adapter *adapter);
-extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
 
 extern unsigned int copybreak;
 
@@ -573,7 +571,7 @@ extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
 extern void e1000e_config_collision_dist(struct e1000_hw *hw);
 extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
 extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
-extern s32 e1000e_blink_led(struct e1000_hw *hw);
+extern s32 e1000e_blink_led_generic(struct e1000_hw *hw);
 extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
 extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
 extern void e1000e_reset_adaptive(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 2fefa820302..f4bbeb22f51 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -612,7 +612,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
 	while (timeout) {
 		if (er32(EEMNGCTL) & mask)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 		timeout--;
 	}
 	if (!timeout) {
@@ -802,7 +802,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	ew32(TCTL, E1000_TCTL_PSP);
 	e1e_flush();
 
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	ctrl = er32(CTRL);
 
@@ -1434,6 +1434,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
 static struct e1000_mac_operations es2_mac_ops = {
 	.read_mac_addr		= e1000_read_mac_addr_80003es2lan,
 	.id_led_init		= e1000e_id_led_init,
+	.blink_led		= e1000e_blink_led_generic,
 	.check_mng_mode		= e1000e_check_mng_mode_generic,
 	/* check_for_link dependent on media type */
 	.cleanup_led		= e1000e_cleanup_led_generic,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 07f09e96e45..859d0d3af6c 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -122,6 +122,7 @@ static int e1000_get_settings(struct net_device *netdev,
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	u32 speed;
 
 	if (hw->phy.media_type == e1000_media_type_copper) {
 
@@ -159,23 +160,23 @@ static int e1000_get_settings(struct net_device *netdev,
 		ecmd->transceiver = XCVR_EXTERNAL;
 	}
 
-	ecmd->speed = -1;
+	speed = -1;
 	ecmd->duplex = -1;
 
 	if (netif_running(netdev)) {
 		if (netif_carrier_ok(netdev)) {
-			ecmd->speed = adapter->link_speed;
+			speed = adapter->link_speed;
 			ecmd->duplex = adapter->link_duplex - 1;
 		}
 	} else {
 		u32 status = er32(STATUS);
 		if (status & E1000_STATUS_LU) {
 			if (status & E1000_STATUS_SPEED_1000)
-				ecmd->speed = 1000;
+				speed = SPEED_1000;
 			else if (status & E1000_STATUS_SPEED_100)
-				ecmd->speed = 100;
+				speed = SPEED_100;
 			else
-				ecmd->speed = 10;
+				speed = SPEED_10;
 
 			if (status & E1000_STATUS_FD)
 				ecmd->duplex = DUPLEX_FULL;
@@ -184,6 +185,7 @@ static int e1000_get_settings(struct net_device *netdev,
 		}
 	}
 
+	ethtool_cmd_speed_set(ecmd, speed);
 	ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
 			 hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
 
@@ -198,20 +200,25 @@ static int e1000_get_settings(struct net_device *netdev,
 	return 0;
 }
 
-static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
 {
 	struct e1000_mac_info *mac = &adapter->hw.mac;
 
 	mac->autoneg = 0;
 
+	/* Make sure dplx is at most 1 bit and lsb of speed is not set
+	 * for the switch() below to work */
+	if ((spd & 1) || (dplx & ~1))
+		goto err_inval;
+
 	/* Fiber NICs only allow 1000 gbps Full duplex */
 	if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
-		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-		e_err("Unsupported Speed/Duplex configuration\n");
-		return -EINVAL;
+	    spd != SPEED_1000 &&
+	    dplx != DUPLEX_FULL) {
+		goto err_inval;
 	}
 
-	switch (spddplx) {
+	switch (spd + dplx) {
 	case SPEED_10 + DUPLEX_HALF:
 		mac->forced_speed_duplex = ADVERTISE_10_HALF;
 		break;
@@ -230,10 +237,13 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
-		e_err("Unsupported Speed/Duplex configuration\n");
-		return -EINVAL;
+		goto err_inval;
 	}
 	return 0;
+
+err_inval:
+	e_err("Unsupported Speed/Duplex configuration\n");
+	return -EINVAL;
 }
 
 static int e1000_set_settings(struct net_device *netdev,
@@ -253,7 +263,7 @@ static int e1000_set_settings(struct net_device *netdev,
 	}
 
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
-		msleep(1);
+		usleep_range(1000, 2000);
 
 	if (ecmd->autoneg == AUTONEG_ENABLE) {
 		hw->mac.autoneg = 1;
@@ -269,7 +279,8 @@ static int e1000_set_settings(struct net_device *netdev,
 		if (adapter->fc_autoneg)
 			hw->fc.requested_mode = e1000_fc_default;
 	} else {
-		if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+		u32 speed = ethtool_cmd_speed(ecmd);
+		if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
 			clear_bit(__E1000_RESETTING, &adapter->state);
 			return -EINVAL;
 		}
@@ -317,7 +328,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	adapter->fc_autoneg = pause->autoneg;
 
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
-		msleep(1);
+		usleep_range(1000, 2000);
 
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
 		hw->fc.requested_mode = e1000_fc_default;
@@ -673,7 +684,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		return -EINVAL;
 
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
-		msleep(1);
+		usleep_range(1000, 2000);
 
 	if (netif_running(adapter->netdev))
 		e1000e_down(adapter);
@@ -952,7 +963,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	/* Test each interrupt */
 	for (i = 0; i < 10; i++) {
@@ -984,7 +995,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 			adapter->test_icr = 0;
 			ew32(IMC, mask);
 			ew32(ICS, mask);
-			msleep(10);
+			usleep_range(10000, 20000);
 
 			if (adapter->test_icr & mask) {
 				*data = 3;
@@ -1002,7 +1013,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		adapter->test_icr = 0;
 		ew32(IMS, mask);
 		ew32(ICS, mask);
-		msleep(10);
+		usleep_range(10000, 20000);
 
 		if (!(adapter->test_icr & mask)) {
 			*data = 4;
@@ -1020,7 +1031,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 			adapter->test_icr = 0;
 			ew32(IMC, ~mask & 0x00007FFF);
 			ew32(ICS, ~mask & 0x00007FFF);
-			msleep(10);
+			usleep_range(10000, 20000);
 
 			if (adapter->test_icr) {
 				*data = 5;
@@ -1031,7 +1042,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	ew32(IMC, 0xFFFFFFFF);
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	/* Unhook test interrupt handler */
 	free_irq(irq, netdev);
@@ -1406,7 +1417,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
 	 */
 #define E1000_SERDES_LB_ON 0x410
 	ew32(SCTL, E1000_SERDES_LB_ON);
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	return 0;
 }
@@ -1501,7 +1512,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 		    hw->phy.media_type == e1000_media_type_internal_serdes) {
 #define E1000_SERDES_LB_OFF 0x400
 			ew32(SCTL, E1000_SERDES_LB_OFF);
-			msleep(10);
+			usleep_range(10000, 20000);
 			break;
 		}
 		/* Fall Through */
@@ -1851,64 +1862,35 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
-/* toggle LED 4 times per second = 2 "blinks" per second */
-#define E1000_ID_INTERVAL	(HZ/4)
-
-/* bit defines for adapter->led_status */
-#define E1000_LED_ON		0
-
-void e1000e_led_blink_task(struct work_struct *work)
-{
-	struct e1000_adapter *adapter = container_of(work,
-	                                struct e1000_adapter, led_blink_task);
-
-	if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
-		adapter->hw.mac.ops.led_off(&adapter->hw);
-	else
-		adapter->hw.mac.ops.led_on(&adapter->hw);
-}
-
-static void e1000_led_blink_callback(unsigned long data)
-{
-	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
-	schedule_work(&adapter->led_blink_task);
-	mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
-}
-
-static int e1000_phys_id(struct net_device *netdev, u32 data)
+static int e1000_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
-	if (!data)
-		data = INT_MAX;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		if (!hw->mac.ops.blink_led)
+			return 2;	/* cycle on/off twice per second */
 
-	if ((hw->phy.type == e1000_phy_ife) ||
-	    (hw->mac.type == e1000_pchlan) ||
-	    (hw->mac.type == e1000_pch2lan) ||
-	    (hw->mac.type == e1000_82583) ||
-	    (hw->mac.type == e1000_82574)) {
-		if (!adapter->blink_timer.function) {
-			init_timer(&adapter->blink_timer);
-			adapter->blink_timer.function =
-				e1000_led_blink_callback;
-			adapter->blink_timer.data = (unsigned long) adapter;
-		}
-		mod_timer(&adapter->blink_timer, jiffies);
-		msleep_interruptible(data * 1000);
-		del_timer_sync(&adapter->blink_timer);
+		hw->mac.ops.blink_led(hw);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
 		if (hw->phy.type == e1000_phy_ife)
 			e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
-	} else {
-		e1000e_blink_led(hw);
-		msleep_interruptible(data * 1000);
-	}
+		hw->mac.ops.led_off(hw);
+		hw->mac.ops.cleanup_led(hw);
+		break;
 
-	hw->mac.ops.led_off(hw);
-	clear_bit(E1000_LED_ON, &adapter->led_status);
-	hw->mac.ops.cleanup_led(hw);
+	case ETHTOOL_ID_ON:
+		adapter->hw.mac.ops.led_on(&adapter->hw);
+		break;
 
+	case ETHTOOL_ID_OFF:
+		adapter->hw.mac.ops.led_off(&adapter->hw);
+		break;
+	}
 	return 0;
 }
 
@@ -2020,6 +2002,31 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
 	}
 }
 
+static int e1000e_set_flags(struct net_device *netdev, u32 data)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	bool need_reset = false;
+	int rc;
+
+	need_reset = (data & ETH_FLAG_RXVLAN) !=
+		     (netdev->features & NETIF_F_HW_VLAN_RX);
+
+	rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
+				  ETH_FLAG_TXVLAN);
+
+	if (rc)
+		return rc;
+
+	if (need_reset) {
+		if (netif_running(netdev))
+			e1000e_reinit_locked(adapter);
+		else
+			e1000e_reset(adapter);
+	}
+
+	return 0;
+}
+
 static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
@@ -2049,12 +2056,13 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.set_tso		= e1000_set_tso,
 	.self_test		= e1000_diag_test,
 	.get_strings		= e1000_get_strings,
-	.phys_id		= e1000_phys_id,
+	.set_phys_id		= e1000_set_phys_id,
 	.get_ethtool_stats	= e1000_get_ethtool_stats,
 	.get_sset_count		= e1000e_get_sset_count,
 	.get_coalesce		= e1000_get_coalesce,
 	.set_coalesce		= e1000_set_coalesce,
 	.get_flags		= ethtool_op_get_flags,
+	.set_flags		= e1000e_set_flags,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 307e1ec2241..6c2fa8327f5 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -756,6 +756,7 @@ struct e1000_host_mng_command_info {
 /* Function pointers and static data for the MAC. */
 struct e1000_mac_operations {
 	s32  (*id_led_init)(struct e1000_hw *);
+	s32  (*blink_led)(struct e1000_hw *);
 	bool (*check_mng_mode)(struct e1000_hw *);
 	s32  (*check_for_link)(struct e1000_hw *);
 	s32  (*cleanup_led)(struct e1000_hw *);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index ce1dbfdca11..3369d1f6a39 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,7 +338,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	/* Ungate automatic PHY configuration on non-managed 82579 */
 	if ((hw->mac.type == e1000_pch2lan) &&
 	    !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
-		msleep(10);
+		usleep_range(10000, 20000);
 		e1000_gate_hw_phy_config_ich8lan(hw, false);
 	}
 
@@ -427,7 +427,7 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 	phy->id = 0;
 	while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
 	       (i++ < 100)) {
-		msleep(1);
+		usleep_range(1000, 2000);
 		ret_val = e1000e_get_phy_id(hw);
 		if (ret_val)
 			return ret_val;
@@ -564,6 +564,8 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 		mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
 		/* ID LED init */
 		mac->ops.id_led_init = e1000e_id_led_init;
+		/* blink LED */
+		mac->ops.blink_led = e1000e_blink_led_generic;
 		/* setup LED */
 		mac->ops.setup_led = e1000e_setup_led_generic;
 		/* cleanup LED */
@@ -767,6 +769,8 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	     (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
 		adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
 		adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+		hw->mac.ops.blink_led = NULL;
 	}
 
 	if ((adapter->hw.mac.type == e1000_ich8lan) &&
@@ -1704,7 +1708,7 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
 		goto out;
 
 	/* Allow time for h/w to get to quiescent state after reset */
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	/* Perform any necessary post-reset workarounds */
 	switch (hw->mac.type) {
@@ -1737,7 +1741,7 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
 	if (hw->mac.type == e1000_pch2lan) {
 		/* Ungate automatic PHY configuration on non-managed 82579 */
 		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
-			msleep(10);
+			usleep_range(10000, 20000);
 			e1000_gate_hw_phy_config_ich8lan(hw, false);
 		}
 
@@ -2532,7 +2536,7 @@ release:
 	 */
 	if (!ret_val) {
 		e1000e_reload_nvm(hw);
-		msleep(10);
+		usleep_range(10000, 20000);
 	}
 
 out:
@@ -3009,7 +3013,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ew32(TCTL, E1000_TCTL_PSP);
 	e1e_flush();
 
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	/* Workaround for ICH8 bit corruption issue in FIFO memory */
 	if (hw->mac.type == e1000_ich8lan) {
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 96921de5df2..dd8ab05b559 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -144,7 +144,7 @@ void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
  *  @hw: pointer to the HW structure
  *  @rar_count: receive address registers
  *
- *  Setups the receive address registers by setting the base receive address
+ *  Setup the receive address registers by setting the base receive address
  *  register to the devices MAC address and clearing all the other receive
  *  address registers to 0.
  **/
@@ -868,7 +868,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
 	 * milliseconds even if the other end is doing it in SW).
 	 */
 	for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
-		msleep(10);
+		usleep_range(10000, 20000);
 		status = er32(STATUS);
 		if (status & E1000_STATUS_LU)
 			break;
@@ -930,7 +930,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
 
 	ew32(CTRL, ctrl);
 	e1e_flush();
-	msleep(1);
+	usleep_range(1000, 2000);
 
 	/*
 	 * For these adapters, the SW definable pin 1 is set when the optics
@@ -1181,7 +1181,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 			 * of pause frames.  In this case, we had to advertise
 			 * FULL flow control because we could not advertise Rx
 			 * ONLY. Hence, we must now check to see if we need to
-			 * turn OFF  the TRANSMISSION of PAUSE frames.
+			 * turn OFF the TRANSMISSION of PAUSE frames.
 			 */
 			if (hw->fc.requested_mode == e1000_fc_full) {
 				hw->fc.current_mode = e1000_fc_full;
@@ -1385,7 +1385,7 @@ s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
 	while (i < AUTO_READ_DONE_TIMEOUT) {
 		if (er32(EECD) & E1000_EECD_AUTO_RD)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 		i++;
 	}
 
@@ -1530,12 +1530,12 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_blink_led - Blink LED
+ *  e1000e_blink_led_generic - Blink LED
  *  @hw: pointer to the HW structure
  *
  *  Blink the LEDs which are set to be on.
  **/
-s32 e1000e_blink_led(struct e1000_hw *hw)
+s32 e1000e_blink_led_generic(struct e1000_hw *hw)
 {
 	u32 ledctl_blink = 0;
 	u32 i;
@@ -2087,8 +2087,6 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 	if (ret_val)
 		return ret_val;
 
-	msleep(10);
-
 	while (widx < words) {
 		u8 write_opcode = NVM_WRITE_OPCODE_SPI;
 
@@ -2132,7 +2130,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 		}
 	}
 
-	msleep(10);
+	usleep_range(10000, 20000);
 	nvm->ops.release(hw);
 	return 0;
 }
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index a39d4a4d871..0939040305f 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -58,6 +58,8 @@
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
+
 static const struct e1000_info *e1000_info_tbl[] = {
 	[board_82571]		= &e1000_82571_info,
 	[board_82572]		= &e1000_82572_info,
@@ -459,13 +461,13 @@ static void e1000_receive_skb(struct e1000_adapter *adapter,
 			      struct net_device *netdev, struct sk_buff *skb,
 			      u8 status, __le16 vlan)
 {
+	u16 tag = le16_to_cpu(vlan);
 	skb->protocol = eth_type_trans(skb, netdev);
 
-	if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
-		vlan_gro_receive(&adapter->napi, adapter->vlgrp,
-				 le16_to_cpu(vlan), skb);
-	else
-		napi_gro_receive(&adapter->napi, skb);
+	if (status & E1000_RXD_STAT_VP)
+		__vlan_hwaccel_put_tag(skb, tag);
+
+	napi_gro_receive(&adapter->napi, skb);
 }
 
 /**
@@ -2433,6 +2435,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 		vfta |= (1 << (vid & 0x1F));
 		hw->mac.ops.write_vfta(hw, index, vfta);
 	}
+
+	set_bit(vid, adapter->active_vlans);
 }
 
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
@@ -2441,13 +2445,6 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 vfta, index;
 
-	if (!test_bit(__E1000_DOWN, &adapter->state))
-		e1000_irq_disable(adapter);
-	vlan_group_set_device(adapter->vlgrp, vid, NULL);
-
-	if (!test_bit(__E1000_DOWN, &adapter->state))
-		e1000_irq_enable(adapter);
-
 	if ((adapter->hw.mng_cookie.status &
 	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
 	    (vid == adapter->mng_vlan_id)) {
@@ -2463,93 +2460,105 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 		vfta &= ~(1 << (vid & 0x1F));
 		hw->mac.ops.write_vfta(hw, index, vfta);
 	}
+
+	clear_bit(vid, adapter->active_vlans);
 }
 
-static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+/**
+ * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	u16 vid = adapter->hw.mng_cookie.vlan_id;
-	u16 old_vid = adapter->mng_vlan_id;
-
-	if (!adapter->vlgrp)
-		return;
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
 
-	if (!vlan_group_get_device(adapter->vlgrp, vid)) {
-		adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-		if (adapter->hw.mng_cookie.status &
-			E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
-			e1000_vlan_rx_add_vid(netdev, vid);
-			adapter->mng_vlan_id = vid;
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		/* disable VLAN receive filtering */
+		rctl = er32(RCTL);
+		rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
+		ew32(RCTL, rctl);
+
+		if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+			e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+			adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 		}
-
-		if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
-				(vid != old_vid) &&
-		    !vlan_group_get_device(adapter->vlgrp, old_vid))
-			e1000_vlan_rx_kill_vid(netdev, old_vid);
-	} else {
-		adapter->mng_vlan_id = vid;
 	}
 }
 
+/**
+ * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rctl;
 
-static void e1000_vlan_rx_register(struct net_device *netdev,
-				   struct vlan_group *grp)
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		/* enable VLAN receive filtering */
+		rctl = er32(RCTL);
+		rctl |= E1000_RCTL_VFE;
+		rctl &= ~E1000_RCTL_CFIEN;
+		ew32(RCTL, rctl);
+	}
+}
+
+/**
+ * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter)
 {
-	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	u32 ctrl, rctl;
+	u32 ctrl;
 
-	if (!test_bit(__E1000_DOWN, &adapter->state))
-		e1000_irq_disable(adapter);
-	adapter->vlgrp = grp;
+	/* disable VLAN tag insert/strip */
+	ctrl = er32(CTRL);
+	ctrl &= ~E1000_CTRL_VME;
+	ew32(CTRL, ctrl);
+}
 
-	if (grp) {
-		/* enable VLAN tag insert/strip */
-		ctrl = er32(CTRL);
-		ctrl |= E1000_CTRL_VME;
-		ew32(CTRL, ctrl);
+/**
+ * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ctrl;
 
-		if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
-			/* enable VLAN receive filtering */
-			rctl = er32(RCTL);
-			rctl &= ~E1000_RCTL_CFIEN;
-			ew32(RCTL, rctl);
-			e1000_update_mng_vlan(adapter);
-		}
-	} else {
-		/* disable VLAN tag insert/strip */
-		ctrl = er32(CTRL);
-		ctrl &= ~E1000_CTRL_VME;
-		ew32(CTRL, ctrl);
+	/* enable VLAN tag insert/strip */
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_VME;
+	ew32(CTRL, ctrl);
+}
 
-		if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
-			if (adapter->mng_vlan_id !=
-			    (u16)E1000_MNG_VLAN_NONE) {
-				e1000_vlan_rx_kill_vid(netdev,
-						       adapter->mng_vlan_id);
-				adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-			}
-		}
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	u16 vid = adapter->hw.mng_cookie.vlan_id;
+	u16 old_vid = adapter->mng_vlan_id;
+
+	if (adapter->hw.mng_cookie.status &
+	    E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+		e1000_vlan_rx_add_vid(netdev, vid);
+		adapter->mng_vlan_id = vid;
 	}
 
-	if (!test_bit(__E1000_DOWN, &adapter->state))
-		e1000_irq_enable(adapter);
+	if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
+		e1000_vlan_rx_kill_vid(netdev, old_vid);
 }
 
 static void e1000_restore_vlan(struct e1000_adapter *adapter)
 {
 	u16 vid;
 
-	e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
-
-	if (!adapter->vlgrp)
-		return;
+	e1000_vlan_rx_add_vid(adapter->netdev, 0);
 
-	for (vid = 0; vid < VLAN_N_VID; vid++) {
-		if (!vlan_group_get_device(adapter->vlgrp, vid))
-			continue;
+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
 		e1000_vlan_rx_add_vid(adapter->netdev, vid);
-	}
 }
 
 static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
@@ -2902,7 +2911,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 	rctl = er32(RCTL);
 	ew32(RCTL, rctl & ~E1000_RCTL_EN);
 	e1e_flush();
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	if (adapter->flags2 & FLAG2_DMA_BURST) {
 		/*
@@ -3039,6 +3048,8 @@ static void e1000_set_multi(struct net_device *netdev)
 	if (netdev->flags & IFF_PROMISC) {
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
 		rctl &= ~E1000_RCTL_VFE;
+		/* Do not hardware filter VLANs in promisc mode */
+		e1000e_vlan_filter_disable(adapter);
 	} else {
 		if (netdev->flags & IFF_ALLMULTI) {
 			rctl |= E1000_RCTL_MPE;
@@ -3046,8 +3057,7 @@ static void e1000_set_multi(struct net_device *netdev)
 		} else {
 			rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
 		}
-		if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
-			rctl |= E1000_RCTL_VFE;
+		e1000e_vlan_filter_enable(adapter);
 	}
 
 	ew32(RCTL, rctl);
@@ -3072,6 +3082,11 @@ static void e1000_set_multi(struct net_device *netdev)
 		 */
 		e1000_update_mc_addr_list(hw, NULL, 0);
 	}
+
+	if (netdev->features & NETIF_F_HW_VLAN_RX)
+		e1000e_vlan_strip_enable(adapter);
+	else
+		e1000e_vlan_strip_disable(adapter);
 }
 
 /**
@@ -3383,7 +3398,7 @@ void e1000e_down(struct e1000_adapter *adapter)
 	ew32(TCTL, tctl);
 	/* flush both disables and wait for them to finish */
 	e1e_flush();
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	napi_disable(&adapter->napi);
 	e1000_irq_disable(adapter);
@@ -3418,7 +3433,7 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
 {
 	might_sleep();
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
-		msleep(1);
+		usleep_range(1000, 2000);
 	e1000e_down(adapter);
 	e1000e_up(adapter);
 	clear_bit(__E1000_RESETTING, &adapter->state);
@@ -3721,10 +3736,8 @@ static int e1000_close(struct net_device *netdev)
 	 * kill manageability vlan ID if supported, but not if a vlan with
 	 * the same ID is registered on the host OS (let 8021q kill it)
 	 */
-	if ((adapter->hw.mng_cookie.status &
-			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
-	     !(adapter->vlgrp &&
-	       vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
+	if (adapter->hw.mng_cookie.status &
+	    E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
 		e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
 
 	/*
@@ -4328,7 +4341,6 @@ static void e1000_watchdog_task(struct work_struct *work)
 link_up:
 	spin_lock(&adapter->stats64_lock);
 	e1000e_update_stats(adapter);
-	spin_unlock(&adapter->stats64_lock);
 
 	mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
 	adapter->tpt_old = adapter->stats.tpt;
@@ -4339,6 +4351,7 @@ link_up:
 	adapter->gorc_old = adapter->stats.gorc;
 	adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
 	adapter->gotc_old = adapter->stats.gotc;
+	spin_unlock(&adapter->stats64_lock);
 
 	e1000e_update_adaptive(&adapter->hw);
 
@@ -4886,7 +4899,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 	if (skb->protocol == htons(ETH_P_IP))
 		tx_flags |= E1000_TX_FLAGS_IPV4;
 
-	/* if count is 0 then mapping error has occured */
+	/* if count is 0 then mapping error has occurred */
 	count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
 	if (count) {
 		e1000_tx_queue(adapter, tx_flags, count);
@@ -5028,7 +5041,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	}
 
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
-		msleep(1);
+		usleep_range(1000, 2000);
 	/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
 	adapter->max_frame_size = max_frame;
 	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
@@ -5373,7 +5386,7 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 	pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
 }
 #endif
-void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 {
 	dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
 		 (state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
@@ -5393,13 +5406,19 @@ static int __e1000_resume(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	u16 aspm_disable_flag = 0;
 	u32 err;
 
+	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
+		aspm_disable_flag = PCIE_LINK_STATE_L0S;
+	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
+		aspm_disable_flag |= PCIE_LINK_STATE_L1;
+	if (aspm_disable_flag)
+		e1000e_disable_aspm(pdev, aspm_disable_flag);
+
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	pci_save_state(pdev);
-	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
-		e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
 
 	e1000e_set_interrupt_capability(adapter);
 	if (netif_running(netdev)) {
@@ -5643,11 +5662,17 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	u16 aspm_disable_flag = 0;
 	int err;
 	pci_ers_result_t result;
 
+	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
+		aspm_disable_flag = PCIE_LINK_STATE_L0S;
 	if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
-		e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
+		aspm_disable_flag |= PCIE_LINK_STATE_L1;
+	if (aspm_disable_flag)
+		e1000e_disable_aspm(pdev, aspm_disable_flag);
+
 	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
@@ -5714,7 +5739,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
 	u8 pba_str[E1000_PBANUM_LENGTH];
 
 	/* print bus type/speed/width info */
-	e_info("(PCI Express:2.5GB/s:%s) %pM\n",
+	e_info("(PCI Express:2.5GT/s:%s) %pM\n",
 	       /* bus width */
 	       ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
 	        "Width x1"),
@@ -5759,7 +5784,6 @@ static const struct net_device_ops e1000e_netdev_ops = {
 	.ndo_tx_timeout		= e1000_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
 
-	.ndo_vlan_rx_register	= e1000_vlan_rx_register,
 	.ndo_vlan_rx_add_vid	= e1000_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= e1000_vlan_rx_kill_vid,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -5789,12 +5813,17 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	resource_size_t flash_start, flash_len;
 
 	static int cards_found;
+	u16 aspm_disable_flag = 0;
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
 
+	if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
+		aspm_disable_flag = PCIE_LINK_STATE_L0S;
 	if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
-		e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
+		aspm_disable_flag |= PCIE_LINK_STATE_L1;
+	if (aspm_disable_flag)
+		e1000e_disable_aspm(pdev, aspm_disable_flag);
 
 	err = pci_enable_device_mem(pdev);
 	if (err)
@@ -5991,7 +6020,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
 	INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
 	INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
-	INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 
 	/* Initialize link parameters. User can change them with ethtool */
 	adapter->hw.mac.autoneg = 1;
@@ -6124,7 +6152,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	cancel_work_sync(&adapter->watchdog_task);
 	cancel_work_sync(&adapter->downshift_task);
 	cancel_work_sync(&adapter->update_phy_task);
-	cancel_work_sync(&adapter->led_blink_task);
 	cancel_work_sync(&adapter->print_hang_task);
 
 	if (!(netdev->flags & IFF_UP))
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 6ae31fcfb62..484774c13c2 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2372,7 +2372,7 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw)
 				ret_val = 0;
 				goto out;
 			}
-			msleep(1);
+			usleep_range(1000, 2000);
 			i++;
 		} while (i < 10);
 	}
@@ -2740,7 +2740,7 @@ void e1000_power_down_phy_copper(struct e1000_hw *hw)
 	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
 	mii_reg |= MII_CR_POWER_DOWN;
 	e1e_wphy(hw, PHY_CONTROL, mii_reg);
-	msleep(1);
+	usleep_range(1000, 2000);
 }
 
 /**
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index eb35951a244..dfeb006035d 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1703,7 +1703,7 @@ static int eepro_ethtool_get_settings(struct net_device *dev,
 		cmd->advertising |= ADVERTISED_AUI;
 	}
 
-	cmd->speed = SPEED_10;
+	ethtool_cmd_speed_set(cmd, SPEED_10);
 
 	if (dev->if_port == TPE && lp->word[1] & ee_Duplex) {
 		cmd->duplex = DUPLEX_FULL;
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index 3e2e734fecb..7f642aef5e8 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -34,6 +34,7 @@
 static int ehea_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct ehea_port *port = netdev_priv(dev);
+	u32 speed;
 	int ret;
 
 	ret = ehea_sense_port_attr(port);
@@ -43,27 +44,44 @@ static int ehea_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	if (netif_carrier_ok(dev)) {
 		switch (port->port_speed) {
-		case EHEA_SPEED_10M: cmd->speed = SPEED_10; break;
-		case EHEA_SPEED_100M: cmd->speed = SPEED_100; break;
-		case EHEA_SPEED_1G: cmd->speed = SPEED_1000; break;
-		case EHEA_SPEED_10G: cmd->speed = SPEED_10000; break;
+		case EHEA_SPEED_10M:
+			speed = SPEED_10;
+			break;
+		case EHEA_SPEED_100M:
+			speed = SPEED_100;
+			break;
+		case EHEA_SPEED_1G:
+			speed = SPEED_1000;
+			break;
+		case EHEA_SPEED_10G:
+			speed = SPEED_10000;
+			break;
+		default:
+			speed = -1;
+			break; /* BUG */
 		}
 		cmd->duplex = port->full_duplex == 1 ?
 						     DUPLEX_FULL : DUPLEX_HALF;
 	} else {
-		cmd->speed = -1;
+		speed = ~0;
 		cmd->duplex = -1;
 	}
+	ethtool_cmd_speed_set(cmd, speed);
 
-	cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full
-		       | SUPPORTED_100baseT_Full |  SUPPORTED_100baseT_Half
-		       | SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half
-		       | SUPPORTED_Autoneg | SUPPORTED_FIBRE);
-
-	cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_Autoneg
-			 | ADVERTISED_FIBRE);
+	if (cmd->speed == SPEED_10000) {
+		cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+		cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
+		cmd->port = PORT_FIBRE;
+	} else {
+		cmd->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full
+			       | SUPPORTED_100baseT_Half | SUPPORTED_10baseT_Full
+			       | SUPPORTED_10baseT_Half | SUPPORTED_Autoneg
+			       | SUPPORTED_TP);
+		cmd->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg
+				 | ADVERTISED_TP);
+		cmd->port = PORT_TP;
+	}
 
-	cmd->port = PORT_FIBRE;
 	cmd->autoneg = port->autoneg == 1 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
 
 	return 0;
@@ -162,11 +180,6 @@ static void ehea_set_msglevel(struct net_device *dev, u32 value)
 	port->msg_enable = value;
 }
 
-static u32 ehea_get_rx_csum(struct net_device *dev)
-{
-	return 1;
-}
-
 static char ehea_ethtool_stats_keys[][ETH_GSTRING_LEN] = {
 	{"sig_comp_iv"},
 	{"swqe_refill_th"},
@@ -263,34 +276,16 @@ static void ehea_get_ethtool_stats(struct net_device *dev,
 
 }
 
-static int ehea_set_flags(struct net_device *dev, u32 data)
-{
-	/* Avoid changing the VLAN flags */
-	if ((data & (ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN)) !=
-	    (ethtool_op_get_flags(dev) & (ETH_FLAG_RXVLAN |
-					  ETH_FLAG_TXVLAN))){
-		return -EINVAL;
-	}
-
-	return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO
-					| ETH_FLAG_TXVLAN
-					| ETH_FLAG_RXVLAN);
-}
-
 const struct ethtool_ops ehea_ethtool_ops = {
 	.get_settings = ehea_get_settings,
 	.get_drvinfo = ehea_get_drvinfo,
 	.get_msglevel = ehea_get_msglevel,
 	.set_msglevel = ehea_set_msglevel,
 	.get_link = ethtool_op_get_link,
-	.set_tso = ethtool_op_set_tso,
 	.get_strings = ehea_get_strings,
 	.get_sset_count = ehea_get_sset_count,
 	.get_ethtool_stats = ehea_get_ethtool_stats,
-	.get_rx_csum = ehea_get_rx_csum,
 	.set_settings = ehea_set_settings,
-	.get_flags = ethtool_op_get_flags,
-	.set_flags = ehea_set_flags,
 	.nway_reset = ehea_nway_reset,		/* Restart autonegotiation */
 };
 
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index f75d3144b8a..6a0a8fca62b 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -41,6 +41,7 @@
 #include <linux/memory.h>
 #include <asm/kexec.h>
 #include <linux/mutex.h>
+#include <linux/prefetch.h>
 
 #include <net/ip.h>
 
@@ -2688,9 +2689,6 @@ static int ehea_open(struct net_device *dev)
 		netif_start_queue(dev);
 	}
 
-	init_waitqueue_head(&port->swqe_avail_wq);
-	init_waitqueue_head(&port->restart_wq);
-
 	mutex_unlock(&port->port_lock);
 
 	return ret;
@@ -3040,11 +3038,14 @@ static void ehea_rereg_mrs(void)
 
 					if (dev->flags & IFF_UP) {
 						mutex_lock(&port->port_lock);
-						port_napi_enable(port);
 						ret = ehea_restart_qps(dev);
-						check_sqs(port);
-						if (!ret)
+						if (!ret) {
+							check_sqs(port);
+							port_napi_enable(port);
 							netif_wake_queue(dev);
+						} else {
+							netdev_err(dev, "Unable to restart QPS\n");
+						}
 						mutex_unlock(&port->port_lock);
 					}
 				}
@@ -3262,10 +3263,12 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
 	dev->netdev_ops = &ehea_netdev_ops;
 	ehea_set_ethtool_ops(dev);
 
+	dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO
+		      | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX | NETIF_F_LRO;
 	dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO
 		      | NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX
 		      | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER
-		      | NETIF_F_LLTX;
+		      | NETIF_F_LLTX | NETIF_F_RXCSUM;
 	dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
 
 	if (use_lro)
@@ -3273,6 +3276,9 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
 
 	INIT_WORK(&port->reset_task, ehea_reset_port);
 
+	init_waitqueue_head(&port->swqe_avail_wq);
+	init_waitqueue_head(&port->restart_wq);
+
 	ret = register_netdev(dev);
 	if (ret) {
 		pr_err("register_netdev failed. ret=%d\n", ret);
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 907b05a1c65..2837ce209cd 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1488,7 +1488,7 @@ enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	cmd->supported	= SUPPORTED_10baseT_Half
 			| SUPPORTED_10baseT_Full
 			| SUPPORTED_TP;
-	cmd->speed	= SPEED_10;
+	ethtool_cmd_speed_set(cmd,  SPEED_10);
 	cmd->duplex	= priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
 	cmd->port	= PORT_TP;
 	cmd->autoneg	= AUTONEG_DISABLE;
@@ -1499,7 +1499,8 @@ enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 static int
 enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	return enc28j60_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
+	return enc28j60_setlink(dev, cmd->autoneg,
+				ethtool_cmd_speed(cmd), cmd->duplex);
 }
 
 static u32 enc28j60_get_msglevel(struct net_device *dev)
diff --git a/drivers/net/enc28j60_hw.h b/drivers/net/enc28j60_hw.h
index 1a0b20969f8..25b41de49f0 100644
--- a/drivers/net/enc28j60_hw.h
+++ b/drivers/net/enc28j60_hw.h
@@ -303,7 +303,7 @@
 /* maximum ethernet frame length */
 #define MAX_FRAMELEN		1518
 
-/* Prefered half duplex: LEDA: Link status LEDB: Rx/Tx activity */
+/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */
 #define ENC28J60_LAMPS_MODE	0x3476
 
 #endif
diff --git a/drivers/net/enic/Makefile b/drivers/net/enic/Makefile
index 2e573be16c1..9d4974bba24 100644
--- a/drivers/net/enic/Makefile
+++ b/drivers/net/enic/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_ENIC) := enic.o
 
 enic-y := enic_main.o vnic_cq.o vnic_intr.o vnic_wq.o \
-	enic_res.o enic_dev.o vnic_dev.o vnic_rq.o vnic_vic.o
+	enic_res.o enic_dev.o enic_pp.o vnic_dev.o vnic_rq.o vnic_vic.o
 
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index 3a3c3c8a3a9..38b351c7b97 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -32,7 +32,7 @@
 
 #define DRV_NAME		"enic"
 #define DRV_DESCRIPTION		"Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION		"2.1.1.12"
+#define DRV_VERSION		"2.1.1.13"
 #define DRV_COPYRIGHT		"Copyright 2008-2011 Cisco Systems, Inc"
 
 #define ENIC_BARS_MAX		6
@@ -84,7 +84,6 @@ struct enic {
 	unsigned int flags;
 	unsigned int mc_count;
 	unsigned int uc_count;
-	int csum_rx_enabled;
 	u32 port_mtu;
 	u32 rx_coalesce_usecs;
 	u32 tx_coalesce_usecs;
@@ -120,4 +119,6 @@ static inline struct device *enic_get_dev(struct enic *enic)
 	return &(enic->pdev->dev);
 }
 
+void enic_reset_addr_lists(struct enic *enic);
+
 #endif /* _ENIC_H_ */
diff --git a/drivers/net/enic/enic_dev.c b/drivers/net/enic/enic_dev.c
index 37ad3a1c82e..90687b14e60 100644
--- a/drivers/net/enic/enic_dev.c
+++ b/drivers/net/enic/enic_dev.c
@@ -177,24 +177,24 @@ int enic_vnic_dev_deinit(struct enic *enic)
 	return err;
 }
 
-int enic_dev_init_prov(struct enic *enic, struct vic_provinfo *vp)
+int enic_dev_init_prov2(struct enic *enic, struct vic_provinfo *vp)
 {
 	int err;
 
 	spin_lock(&enic->devcmd_lock);
-	err = vnic_dev_init_prov(enic->vdev,
+	err = vnic_dev_init_prov2(enic->vdev,
 		(u8 *)vp, vic_provinfo_size(vp));
 	spin_unlock(&enic->devcmd_lock);
 
 	return err;
 }
 
-int enic_dev_init_done(struct enic *enic, int *done, int *error)
+int enic_dev_deinit_done(struct enic *enic, int *status)
 {
 	int err;
 
 	spin_lock(&enic->devcmd_lock);
-	err = vnic_dev_init_done(enic->vdev, done, error);
+	err = vnic_dev_deinit_done(enic->vdev, status);
 	spin_unlock(&enic->devcmd_lock);
 
 	return err;
@@ -219,3 +219,57 @@ void enic_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	enic_del_vlan(enic, vid);
 	spin_unlock(&enic->devcmd_lock);
 }
+
+int enic_dev_enable2(struct enic *enic, int active)
+{
+	int err;
+
+	spin_lock(&enic->devcmd_lock);
+	err = vnic_dev_enable2(enic->vdev, active);
+	spin_unlock(&enic->devcmd_lock);
+
+	return err;
+}
+
+int enic_dev_enable2_done(struct enic *enic, int *status)
+{
+	int err;
+
+	spin_lock(&enic->devcmd_lock);
+	err = vnic_dev_enable2_done(enic->vdev, status);
+	spin_unlock(&enic->devcmd_lock);
+
+	return err;
+}
+
+int enic_dev_status_to_errno(int devcmd_status)
+{
+	switch (devcmd_status) {
+	case ERR_SUCCESS:
+		return 0;
+	case ERR_EINVAL:
+		return -EINVAL;
+	case ERR_EFAULT:
+		return -EFAULT;
+	case ERR_EPERM:
+		return -EPERM;
+	case ERR_EBUSY:
+		return -EBUSY;
+	case ERR_ECMDUNKNOWN:
+	case ERR_ENOTSUPPORTED:
+		return -EOPNOTSUPP;
+	case ERR_EBADSTATE:
+		return -EINVAL;
+	case ERR_ENOMEM:
+		return -ENOMEM;
+	case ERR_ETIMEDOUT:
+		return -ETIMEDOUT;
+	case ERR_ELINKDOWN:
+		return -ENETDOWN;
+	case ERR_EINPROGRESS:
+		return -EINPROGRESS;
+	case ERR_EMAXRES:
+	default:
+		return (devcmd_status < 0) ? devcmd_status : -1;
+	}
+}
diff --git a/drivers/net/enic/enic_dev.h b/drivers/net/enic/enic_dev.h
index 495f57fcb88..d5f68133762 100644
--- a/drivers/net/enic/enic_dev.h
+++ b/drivers/net/enic/enic_dev.h
@@ -35,7 +35,10 @@ int enic_dev_set_ig_vlan_rewrite_mode(struct enic *enic);
 int enic_dev_enable(struct enic *enic);
 int enic_dev_disable(struct enic *enic);
 int enic_vnic_dev_deinit(struct enic *enic);
-int enic_dev_init_prov(struct enic *enic, struct vic_provinfo *vp);
-int enic_dev_init_done(struct enic *enic, int *done, int *error);
+int enic_dev_init_prov2(struct enic *enic, struct vic_provinfo *vp);
+int enic_dev_deinit_done(struct enic *enic, int *status);
+int enic_dev_enable2(struct enic *enic, int arg);
+int enic_dev_enable2_done(struct enic *enic, int *status);
+int enic_dev_status_to_errno(int devcmd_status);
 
 #endif /* _ENIC_DEV_H_ */
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 8b9cad5e971..3d99b0f1a23 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -45,6 +45,7 @@
 #include "enic_res.h"
 #include "enic.h"
 #include "enic_dev.h"
+#include "enic_pp.h"
 
 #define ENIC_NOTIFY_TIMER_PERIOD	(2 * HZ)
 #define WQ_ENET_MAX_DESC_LEN		(1 << WQ_ENET_LEN_BITS)
@@ -179,10 +180,10 @@ static int enic_get_settings(struct net_device *netdev,
 	ecmd->transceiver = XCVR_EXTERNAL;
 
 	if (netif_carrier_ok(netdev)) {
-		ecmd->speed = vnic_dev_port_speed(enic->vdev);
+		ethtool_cmd_speed_set(ecmd, vnic_dev_port_speed(enic->vdev));
 		ecmd->duplex = DUPLEX_FULL;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -250,56 +251,6 @@ static void enic_get_ethtool_stats(struct net_device *netdev,
 		*(data++) = ((u64 *)&vstats->rx)[enic_rx_stats[i].offset];
 }
 
-static u32 enic_get_rx_csum(struct net_device *netdev)
-{
-	struct enic *enic = netdev_priv(netdev);
-	return enic->csum_rx_enabled;
-}
-
-static int enic_set_rx_csum(struct net_device *netdev, u32 data)
-{
-	struct enic *enic = netdev_priv(netdev);
-
-	if (data && !ENIC_SETTING(enic, RXCSUM))
-		return -EINVAL;
-
-	enic->csum_rx_enabled = !!data;
-
-	return 0;
-}
-
-static int enic_set_tx_csum(struct net_device *netdev, u32 data)
-{
-	struct enic *enic = netdev_priv(netdev);
-
-	if (data && !ENIC_SETTING(enic, TXCSUM))
-		return -EINVAL;
-
-	if (data)
-		netdev->features |= NETIF_F_HW_CSUM;
-	else
-		netdev->features &= ~NETIF_F_HW_CSUM;
-
-	return 0;
-}
-
-static int enic_set_tso(struct net_device *netdev, u32 data)
-{
-	struct enic *enic = netdev_priv(netdev);
-
-	if (data && !ENIC_SETTING(enic, TSO))
-		return -EINVAL;
-
-	if (data)
-		netdev->features |=
-			NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN;
-	else
-		netdev->features &=
-			~(NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN);
-
-	return 0;
-}
-
 static u32 enic_get_msglevel(struct net_device *netdev)
 {
 	struct enic *enic = netdev_priv(netdev);
@@ -387,17 +338,8 @@ static const struct ethtool_ops enic_ethtool_ops = {
 	.get_strings = enic_get_strings,
 	.get_sset_count = enic_get_sset_count,
 	.get_ethtool_stats = enic_get_ethtool_stats,
-	.get_rx_csum = enic_get_rx_csum,
-	.set_rx_csum = enic_set_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = enic_set_tx_csum,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = enic_set_tso,
 	.get_coalesce = enic_get_coalesce,
 	.set_coalesce = enic_set_coalesce,
-	.get_flags = ethtool_op_get_flags,
 };
 
 static void enic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf)
@@ -874,7 +816,7 @@ static struct net_device_stats *enic_get_stats(struct net_device *netdev)
 	return net_stats;
 }
 
-static void enic_reset_addr_lists(struct enic *enic)
+void enic_reset_addr_lists(struct enic *enic)
 {
 	enic->mc_count = 0;
 	enic->uc_count = 0;
@@ -1112,157 +1054,77 @@ static int enic_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
 		return -EINVAL;
 }
 
-static int enic_set_port_profile(struct enic *enic, u8 *mac)
-{
-	struct vic_provinfo *vp;
-	u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
-	u16 os_type = VIC_GENERIC_PROV_OS_TYPE_LINUX;
-	char uuid_str[38];
-	char client_mac_str[18];
-	u8 *client_mac;
-	int err;
-
-	err = enic_vnic_dev_deinit(enic);
-	if (err)
-		return err;
-
-	enic_reset_addr_lists(enic);
-
-	switch (enic->pp.request) {
-
-	case PORT_REQUEST_ASSOCIATE:
-
-		if (!(enic->pp.set & ENIC_SET_NAME) || !strlen(enic->pp.name))
-			return -EINVAL;
-
-		if (!is_valid_ether_addr(mac))
-			return -EADDRNOTAVAIL;
-
-		vp = vic_provinfo_alloc(GFP_KERNEL, oui,
-			VIC_PROVINFO_GENERIC_TYPE);
-		if (!vp)
-			return -ENOMEM;
-
-		vic_provinfo_add_tlv(vp,
-			VIC_GENERIC_PROV_TLV_PORT_PROFILE_NAME_STR,
-			strlen(enic->pp.name) + 1, enic->pp.name);
-
-		if (!is_zero_ether_addr(enic->pp.mac_addr))
-			client_mac = enic->pp.mac_addr;
-		else
-			client_mac = mac;
-
-		vic_provinfo_add_tlv(vp,
-			VIC_GENERIC_PROV_TLV_CLIENT_MAC_ADDR,
-			ETH_ALEN, client_mac);
-
-		sprintf(client_mac_str, "%pM", client_mac);
-		vic_provinfo_add_tlv(vp,
-			VIC_GENERIC_PROV_TLV_CLUSTER_PORT_UUID_STR,
-			sizeof(client_mac_str), client_mac_str);
-
-		if (enic->pp.set & ENIC_SET_INSTANCE) {
-			sprintf(uuid_str, "%pUB", enic->pp.instance_uuid);
-			vic_provinfo_add_tlv(vp,
-				VIC_GENERIC_PROV_TLV_CLIENT_UUID_STR,
-				sizeof(uuid_str), uuid_str);
-		}
-
-		if (enic->pp.set & ENIC_SET_HOST) {
-			sprintf(uuid_str, "%pUB", enic->pp.host_uuid);
-			vic_provinfo_add_tlv(vp,
-				VIC_GENERIC_PROV_TLV_HOST_UUID_STR,
-				sizeof(uuid_str), uuid_str);
-		}
-
-		os_type = htons(os_type);
-		vic_provinfo_add_tlv(vp,
-			VIC_GENERIC_PROV_TLV_OS_TYPE,
-			sizeof(os_type), &os_type);
-
-		err = enic_dev_init_prov(enic, vp);
-		vic_provinfo_free(vp);
-		if (err)
-			return err;
-		break;
-
-	case PORT_REQUEST_DISASSOCIATE:
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	/* Set flag to indicate that the port assoc/disassoc
-	 * request has been sent out to fw
-	 */
-	enic->pp.set |= ENIC_PORT_REQUEST_APPLIED;
-
-	return 0;
-}
-
 static int enic_set_vf_port(struct net_device *netdev, int vf,
 	struct nlattr *port[])
 {
 	struct enic *enic = netdev_priv(netdev);
-	struct enic_port_profile new_pp;
-	int err = 0;
+	struct enic_port_profile prev_pp;
+	int err = 0, restore_pp = 1;
 
-	memset(&new_pp, 0, sizeof(new_pp));
+	/* don't support VFs, yet */
+	if (vf != PORT_SELF_VF)
+		return -EOPNOTSUPP;
 
-	if (port[IFLA_PORT_REQUEST]) {
-		new_pp.set |= ENIC_SET_REQUEST;
-		new_pp.request = nla_get_u8(port[IFLA_PORT_REQUEST]);
-	}
+	if (!port[IFLA_PORT_REQUEST])
+		return -EOPNOTSUPP;
+
+	memcpy(&prev_pp, &enic->pp, sizeof(enic->pp));
+	memset(&enic->pp, 0, sizeof(enic->pp));
+
+	enic->pp.set |= ENIC_SET_REQUEST;
+	enic->pp.request = nla_get_u8(port[IFLA_PORT_REQUEST]);
 
 	if (port[IFLA_PORT_PROFILE]) {
-		new_pp.set |= ENIC_SET_NAME;
-		memcpy(new_pp.name, nla_data(port[IFLA_PORT_PROFILE]),
+		enic->pp.set |= ENIC_SET_NAME;
+		memcpy(enic->pp.name, nla_data(port[IFLA_PORT_PROFILE]),
 			PORT_PROFILE_MAX);
 	}
 
 	if (port[IFLA_PORT_INSTANCE_UUID]) {
-		new_pp.set |= ENIC_SET_INSTANCE;
-		memcpy(new_pp.instance_uuid,
+		enic->pp.set |= ENIC_SET_INSTANCE;
+		memcpy(enic->pp.instance_uuid,
 			nla_data(port[IFLA_PORT_INSTANCE_UUID]), PORT_UUID_MAX);
 	}
 
 	if (port[IFLA_PORT_HOST_UUID]) {
-		new_pp.set |= ENIC_SET_HOST;
-		memcpy(new_pp.host_uuid,
+		enic->pp.set |= ENIC_SET_HOST;
+		memcpy(enic->pp.host_uuid,
 			nla_data(port[IFLA_PORT_HOST_UUID]), PORT_UUID_MAX);
 	}
 
-	/* don't support VFs, yet */
-	if (vf != PORT_SELF_VF)
-		return -EOPNOTSUPP;
-
-	if (!(new_pp.set & ENIC_SET_REQUEST))
-		return -EOPNOTSUPP;
-
-	if (new_pp.request == PORT_REQUEST_ASSOCIATE) {
-		/* Special case handling */
-		if (!is_zero_ether_addr(enic->pp.vf_mac))
-			memcpy(new_pp.mac_addr, enic->pp.vf_mac, ETH_ALEN);
+	/* Special case handling: mac came from IFLA_VF_MAC */
+	if (!is_zero_ether_addr(prev_pp.vf_mac))
+		memcpy(enic->pp.mac_addr, prev_pp.vf_mac, ETH_ALEN);
 
 		if (is_zero_ether_addr(netdev->dev_addr))
 			random_ether_addr(netdev->dev_addr);
-	}
 
-	memcpy(&enic->pp, &new_pp, sizeof(struct enic_port_profile));
+	err = enic_process_set_pp_request(enic, &prev_pp, &restore_pp);
+	if (err) {
+		if (restore_pp) {
+			/* Things are still the way they were: Implicit
+			 * DISASSOCIATE failed
+			 */
+			memcpy(&enic->pp, &prev_pp, sizeof(enic->pp));
+		} else {
+			memset(&enic->pp, 0, sizeof(enic->pp));
+			memset(netdev->dev_addr, 0, ETH_ALEN);
+		}
+	} else {
+		/* Set flag to indicate that the port assoc/disassoc
+		 * request has been sent out to fw
+		 */
+		enic->pp.set |= ENIC_PORT_REQUEST_APPLIED;
 
-	err = enic_set_port_profile(enic, netdev->dev_addr);
-	if (err)
-		goto set_port_profile_cleanup;
+		/* If DISASSOCIATE, clean up all assigned/saved macaddresses */
+		if (enic->pp.request == PORT_REQUEST_DISASSOCIATE) {
+			memset(enic->pp.mac_addr, 0, ETH_ALEN);
+			memset(netdev->dev_addr, 0, ETH_ALEN);
+		}
+	}
 
-set_port_profile_cleanup:
 	memset(enic->pp.vf_mac, 0, ETH_ALEN);
 
-	if (err || enic->pp.request == PORT_REQUEST_DISASSOCIATE) {
-		memset(netdev->dev_addr, 0, ETH_ALEN);
-		memset(enic->pp.mac_addr, 0, ETH_ALEN);
-	}
-
 	return err;
 }
 
@@ -1270,34 +1132,15 @@ static int enic_get_vf_port(struct net_device *netdev, int vf,
 	struct sk_buff *skb)
 {
 	struct enic *enic = netdev_priv(netdev);
-	int err, error, done;
 	u16 response = PORT_PROFILE_RESPONSE_SUCCESS;
+	int err;
 
 	if (!(enic->pp.set & ENIC_PORT_REQUEST_APPLIED))
 		return -ENODATA;
 
-	err = enic_dev_init_done(enic, &done, &error);
+	err = enic_process_get_pp_request(enic, enic->pp.request, &response);
 	if (err)
-		error = err;
-
-	switch (error) {
-	case ERR_SUCCESS:
-		if (!done)
-			response = PORT_PROFILE_RESPONSE_INPROGRESS;
-		break;
-	case ERR_EINVAL:
-		response = PORT_PROFILE_RESPONSE_INVALID;
-		break;
-	case ERR_EBADSTATE:
-		response = PORT_PROFILE_RESPONSE_BADSTATE;
-		break;
-	case ERR_ENOMEM:
-		response = PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES;
-		break;
-	default:
-		response = PORT_PROFILE_RESPONSE_ERROR;
-		break;
-	}
+		return err;
 
 	NLA_PUT_U16(skb, IFLA_PORT_REQUEST, enic->pp.request);
 	NLA_PUT_U16(skb, IFLA_PORT_RESPONSE, response);
@@ -1407,7 +1250,7 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq,
 		skb_put(skb, bytes_written);
 		skb->protocol = eth_type_trans(skb, netdev);
 
-		if (enic->csum_rx_enabled && !csum_not_calc) {
+		if ((netdev->features & NETIF_F_RXCSUM) && !csum_not_calc) {
 			skb->csum = htons(checksum);
 			skb->ip_summed = CHECKSUM_COMPLETE;
 		}
@@ -2536,17 +2379,18 @@ static int __devinit enic_probe(struct pci_dev *pdev,
 		dev_info(dev, "loopback tag=0x%04x\n", enic->loop_tag);
 	}
 	if (ENIC_SETTING(enic, TXCSUM))
-		netdev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+		netdev->hw_features |= NETIF_F_SG | NETIF_F_HW_CSUM;
 	if (ENIC_SETTING(enic, TSO))
-		netdev->features |= NETIF_F_TSO |
+		netdev->hw_features |= NETIF_F_TSO |
 			NETIF_F_TSO6 | NETIF_F_TSO_ECN;
-	if (ENIC_SETTING(enic, LRO))
-		netdev->features |= NETIF_F_GRO;
+	if (ENIC_SETTING(enic, RXCSUM))
+		netdev->hw_features |= NETIF_F_RXCSUM;
+
+	netdev->features |= netdev->hw_features;
+
 	if (using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	enic->csum_rx_enabled = ENIC_SETTING(enic, RXCSUM);
-
 	err = register_netdev(netdev);
 	if (err) {
 		dev_err(dev, "Cannot register net device, aborting\n");
diff --git a/drivers/net/enic/enic_pp.c b/drivers/net/enic/enic_pp.c
new file mode 100644
index 00000000000..ffaa75dd1de
--- /dev/null
+++ b/drivers/net/enic/enic_pp.c
@@ -0,0 +1,264 @@
+/*
+ * Copyright 2011 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <net/ip.h>
+
+#include "vnic_vic.h"
+#include "enic_res.h"
+#include "enic.h"
+#include "enic_dev.h"
+
+static int enic_set_port_profile(struct enic *enic)
+{
+	struct net_device *netdev = enic->netdev;
+	struct vic_provinfo *vp;
+	const u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
+	const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
+	char uuid_str[38];
+	char client_mac_str[18];
+	u8 *client_mac;
+	int err;
+
+	if (!(enic->pp.set & ENIC_SET_NAME) || !strlen(enic->pp.name))
+		return -EINVAL;
+
+	vp = vic_provinfo_alloc(GFP_KERNEL, oui,
+		VIC_PROVINFO_GENERIC_TYPE);
+	if (!vp)
+		return -ENOMEM;
+
+	VIC_PROVINFO_ADD_TLV(vp,
+		VIC_GENERIC_PROV_TLV_PORT_PROFILE_NAME_STR,
+		strlen(enic->pp.name) + 1, enic->pp.name);
+
+	if (!is_zero_ether_addr(enic->pp.mac_addr))
+		client_mac = enic->pp.mac_addr;
+	else
+		client_mac = netdev->dev_addr;
+
+	VIC_PROVINFO_ADD_TLV(vp,
+		VIC_GENERIC_PROV_TLV_CLIENT_MAC_ADDR,
+		ETH_ALEN, client_mac);
+
+	snprintf(client_mac_str, sizeof(client_mac_str), "%pM", client_mac);
+	VIC_PROVINFO_ADD_TLV(vp,
+		VIC_GENERIC_PROV_TLV_CLUSTER_PORT_UUID_STR,
+		sizeof(client_mac_str), client_mac_str);
+
+	if (enic->pp.set & ENIC_SET_INSTANCE) {
+		sprintf(uuid_str, "%pUB", enic->pp.instance_uuid);
+		VIC_PROVINFO_ADD_TLV(vp,
+			VIC_GENERIC_PROV_TLV_CLIENT_UUID_STR,
+			sizeof(uuid_str), uuid_str);
+	}
+
+	if (enic->pp.set & ENIC_SET_HOST) {
+		sprintf(uuid_str, "%pUB", enic->pp.host_uuid);
+		VIC_PROVINFO_ADD_TLV(vp,
+			VIC_GENERIC_PROV_TLV_HOST_UUID_STR,
+			sizeof(uuid_str), uuid_str);
+	}
+
+	VIC_PROVINFO_ADD_TLV(vp,
+		VIC_GENERIC_PROV_TLV_OS_TYPE,
+		sizeof(os_type), &os_type);
+
+	err = enic_dev_status_to_errno(enic_dev_init_prov2(enic, vp));
+
+add_tlv_failure:
+	vic_provinfo_free(vp);
+
+	return err;
+}
+
+static int enic_unset_port_profile(struct enic *enic)
+{
+	int err;
+
+	err = enic_vnic_dev_deinit(enic);
+	if (err)
+		return enic_dev_status_to_errno(err);
+
+	enic_reset_addr_lists(enic);
+
+	return 0;
+}
+
+static int enic_are_pp_different(struct enic_port_profile *pp1,
+		struct enic_port_profile *pp2)
+{
+	return strcmp(pp1->name, pp2->name) | !!memcmp(pp1->instance_uuid,
+		pp2->instance_uuid, PORT_UUID_MAX) |
+		!!memcmp(pp1->host_uuid, pp2->host_uuid, PORT_UUID_MAX) |
+		!!memcmp(pp1->mac_addr, pp2->mac_addr, ETH_ALEN);
+}
+
+static int enic_pp_preassociate(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp);
+static int enic_pp_disassociate(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp);
+static int enic_pp_preassociate_rr(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp);
+static int enic_pp_associate(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp);
+
+static int (*enic_pp_handlers[])(struct enic *enic,
+		struct enic_port_profile *prev_state, int *restore_pp) = {
+	[PORT_REQUEST_PREASSOCIATE]	= enic_pp_preassociate,
+	[PORT_REQUEST_PREASSOCIATE_RR]	= enic_pp_preassociate_rr,
+	[PORT_REQUEST_ASSOCIATE]	= enic_pp_associate,
+	[PORT_REQUEST_DISASSOCIATE]	= enic_pp_disassociate,
+};
+
+static const int enic_pp_handlers_count =
+			sizeof(enic_pp_handlers)/sizeof(*enic_pp_handlers);
+
+static int enic_pp_preassociate(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp)
+{
+	return -EOPNOTSUPP;
+}
+
+static int enic_pp_disassociate(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp)
+{
+	return enic_unset_port_profile(enic);
+}
+
+static int enic_pp_preassociate_rr(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp)
+{
+	int err;
+	int active = 0;
+
+	if (enic->pp.request != PORT_REQUEST_ASSOCIATE) {
+		/* If pre-associate is not part of an associate.
+		We always disassociate first */
+		err = enic_pp_handlers[PORT_REQUEST_DISASSOCIATE](enic,
+			prev_pp, restore_pp);
+		if (err)
+			return err;
+
+		*restore_pp = 0;
+	}
+
+	*restore_pp = 0;
+
+	err = enic_set_port_profile(enic);
+	if (err)
+		return err;
+
+	/* If pre-associate is not part of an associate. */
+	if (enic->pp.request != PORT_REQUEST_ASSOCIATE)
+		err = enic_dev_status_to_errno(enic_dev_enable2(enic, active));
+
+	return err;
+}
+
+static int enic_pp_associate(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp)
+{
+	int err;
+	int active = 1;
+
+	/* Check if a pre-associate was called before */
+	if (prev_pp->request != PORT_REQUEST_PREASSOCIATE_RR ||
+		(prev_pp->request == PORT_REQUEST_PREASSOCIATE_RR &&
+			enic_are_pp_different(prev_pp, &enic->pp))) {
+		err = enic_pp_handlers[PORT_REQUEST_DISASSOCIATE](
+			enic, prev_pp, restore_pp);
+		if (err)
+			return err;
+
+		*restore_pp = 0;
+	}
+
+	err = enic_pp_handlers[PORT_REQUEST_PREASSOCIATE_RR](
+			enic, prev_pp, restore_pp);
+	if (err)
+		return err;
+
+	*restore_pp = 0;
+
+	return enic_dev_status_to_errno(enic_dev_enable2(enic, active));
+}
+
+int enic_process_set_pp_request(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp)
+{
+	if (enic->pp.request < enic_pp_handlers_count
+		&& enic_pp_handlers[enic->pp.request])
+		return enic_pp_handlers[enic->pp.request](enic,
+			prev_pp, restore_pp);
+	else
+		return -EOPNOTSUPP;
+}
+
+int enic_process_get_pp_request(struct enic *enic, int request,
+	u16 *response)
+{
+	int err, status = ERR_SUCCESS;
+
+	switch (request) {
+
+	case PORT_REQUEST_PREASSOCIATE_RR:
+	case PORT_REQUEST_ASSOCIATE:
+		err = enic_dev_enable2_done(enic, &status);
+		break;
+
+	case PORT_REQUEST_DISASSOCIATE:
+		err = enic_dev_deinit_done(enic, &status);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (err)
+		status = err;
+
+	switch (status) {
+	case ERR_SUCCESS:
+		*response = PORT_PROFILE_RESPONSE_SUCCESS;
+		break;
+	case ERR_EINVAL:
+		*response = PORT_PROFILE_RESPONSE_INVALID;
+		break;
+	case ERR_EBADSTATE:
+		*response = PORT_PROFILE_RESPONSE_BADSTATE;
+		break;
+	case ERR_ENOMEM:
+		*response = PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES;
+		break;
+	case ERR_EINPROGRESS:
+		*response = PORT_PROFILE_RESPONSE_INPROGRESS;
+		break;
+	default:
+		*response = PORT_PROFILE_RESPONSE_ERROR;
+		break;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/enic/enic_pp.h b/drivers/net/enic/enic_pp.h
new file mode 100644
index 00000000000..699e365a944
--- /dev/null
+++ b/drivers/net/enic/enic_pp.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2011 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef _ENIC_PP_H_
+#define _ENIC_PP_H_
+
+int enic_process_set_pp_request(struct enic *enic,
+	struct enic_port_profile *prev_pp, int *restore_pp);
+int enic_process_get_pp_request(struct enic *enic, int request,
+	u16 *response);
+
+#endif /* _ENIC_PP_H_ */
diff --git a/drivers/net/enic/enic_res.c b/drivers/net/enic/enic_res.c
index f111a37419c..6e5c6356e7d 100644
--- a/drivers/net/enic/enic_res.c
+++ b/drivers/net/enic/enic_res.c
@@ -98,9 +98,9 @@ int enic_get_vnic_config(struct enic *enic)
 		"vNIC MAC addr %pM wq/rq %d/%d mtu %d\n",
 		enic->mac_addr, c->wq_desc_count, c->rq_desc_count, c->mtu);
 	dev_info(enic_get_dev(enic), "vNIC csum tx/rx %d/%d "
-		"tso/lro %d/%d intr timer %d usec rss %d\n",
+		"tso %d intr timer %d usec rss %d\n",
 		ENIC_SETTING(enic, TXCSUM), ENIC_SETTING(enic, RXCSUM),
-		ENIC_SETTING(enic, TSO), ENIC_SETTING(enic, LRO),
+		ENIC_SETTING(enic, TSO),
 		c->intr_timer_usec, ENIC_SETTING(enic, RSS));
 
 	return 0;
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index c089b362a36..68f24ae860a 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -786,48 +786,6 @@ int vnic_dev_init(struct vnic_dev *vdev, int arg)
 	return r;
 }
 
-int vnic_dev_init_done(struct vnic_dev *vdev, int *done, int *err)
-{
-	u64 a0 = 0, a1 = 0;
-	int wait = 1000;
-	int ret;
-
-	*done = 0;
-
-	ret = vnic_dev_cmd(vdev, CMD_INIT_STATUS, &a0, &a1, wait);
-	if (ret)
-		return ret;
-
-	*done = (a0 == 0);
-
-	*err = (a0 == 0) ? (int)a1:0;
-
-	return 0;
-}
-
-int vnic_dev_init_prov(struct vnic_dev *vdev, u8 *buf, u32 len)
-{
-	u64 a0, a1 = len;
-	int wait = 1000;
-	dma_addr_t prov_pa;
-	void *prov_buf;
-	int ret;
-
-	prov_buf = pci_alloc_consistent(vdev->pdev, len, &prov_pa);
-	if (!prov_buf)
-		return -ENOMEM;
-
-	memcpy(prov_buf, buf, len);
-
-	a0 = prov_pa;
-
-	ret = vnic_dev_cmd(vdev, CMD_INIT_PROV_INFO, &a0, &a1, wait);
-
-	pci_free_consistent(vdev->pdev, len, prov_buf, prov_pa);
-
-	return ret;
-}
-
 int vnic_dev_deinit(struct vnic_dev *vdev)
 {
 	u64 a0 = 0, a1 = 0;
@@ -927,4 +885,59 @@ err_out:
 	return NULL;
 }
 
+int vnic_dev_init_prov2(struct vnic_dev *vdev, u8 *buf, u32 len)
+{
+	u64 a0, a1 = len;
+	int wait = 1000;
+	dma_addr_t prov_pa;
+	void *prov_buf;
+	int ret;
+
+	prov_buf = pci_alloc_consistent(vdev->pdev, len, &prov_pa);
+	if (!prov_buf)
+		return -ENOMEM;
 
+	memcpy(prov_buf, buf, len);
+
+	a0 = prov_pa;
+
+	ret = vnic_dev_cmd(vdev, CMD_INIT_PROV_INFO2, &a0, &a1, wait);
+
+	pci_free_consistent(vdev->pdev, len, prov_buf, prov_pa);
+
+	return ret;
+}
+
+int vnic_dev_enable2(struct vnic_dev *vdev, int active)
+{
+	u64 a0, a1 = 0;
+	int wait = 1000;
+
+	a0 = (active ? CMD_ENABLE2_ACTIVE : 0);
+
+	return vnic_dev_cmd(vdev, CMD_ENABLE2, &a0, &a1, wait);
+}
+
+static int vnic_dev_cmd_status(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+	int *status)
+{
+	u64 a0 = cmd, a1 = 0;
+	int wait = 1000;
+	int ret;
+
+	ret = vnic_dev_cmd(vdev, CMD_STATUS, &a0, &a1, wait);
+	if (!ret)
+		*status = (int)a0;
+
+	return ret;
+}
+
+int vnic_dev_enable2_done(struct vnic_dev *vdev, int *status)
+{
+	return vnic_dev_cmd_status(vdev, CMD_ENABLE2, status);
+}
+
+int vnic_dev_deinit_done(struct vnic_dev *vdev, int *status)
+{
+	return vnic_dev_cmd_status(vdev, CMD_DEINIT, status);
+}
diff --git a/drivers/net/enic/vnic_dev.h b/drivers/net/enic/vnic_dev.h
index e837546213a..cf482a2c9dd 100644
--- a/drivers/net/enic/vnic_dev.h
+++ b/drivers/net/enic/vnic_dev.h
@@ -108,8 +108,6 @@ int vnic_dev_disable(struct vnic_dev *vdev);
 int vnic_dev_open(struct vnic_dev *vdev, int arg);
 int vnic_dev_open_done(struct vnic_dev *vdev, int *done);
 int vnic_dev_init(struct vnic_dev *vdev, int arg);
-int vnic_dev_init_done(struct vnic_dev *vdev, int *done, int *err);
-int vnic_dev_init_prov(struct vnic_dev *vdev, u8 *buf, u32 len);
 int vnic_dev_deinit(struct vnic_dev *vdev);
 int vnic_dev_hang_reset(struct vnic_dev *vdev, int arg);
 int vnic_dev_hang_reset_done(struct vnic_dev *vdev, int *done);
@@ -122,5 +120,9 @@ int vnic_dev_set_ig_vlan_rewrite_mode(struct vnic_dev *vdev,
 struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
 	void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar,
 	unsigned int num_bars);
+int vnic_dev_init_prov2(struct vnic_dev *vdev, u8 *buf, u32 len);
+int vnic_dev_enable2(struct vnic_dev *vdev, int active);
+int vnic_dev_enable2_done(struct vnic_dev *vdev, int *status);
+int vnic_dev_deinit_done(struct vnic_dev *vdev, int *status);
 
 #endif /* _VNIC_DEV_H_ */
diff --git a/drivers/net/enic/vnic_devcmd.h b/drivers/net/enic/vnic_devcmd.h
index d833a071bac..c5569bfb47a 100644
--- a/drivers/net/enic/vnic_devcmd.h
+++ b/drivers/net/enic/vnic_devcmd.h
@@ -267,17 +267,62 @@ enum vnic_devcmd_cmd {
 
 	/*
 	 * As for BY_BDF except a0 is index of hvnlink subordinate vnic
-	 * or SR-IOV virtual vnic */
+	 * or SR-IOV virtual vnic
+	 */
 	CMD_PROXY_BY_INDEX =    _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43),
 
 	/*
-	 * in:  (u64)a0=paddr of buffer to put latest VIC VIF-CONFIG-INFO TLV in
-	 *      (u32)a1=length of buffer in a0
-	 * out: (u64)a0=paddr of buffer with latest VIC VIF-CONFIG-INFO TLV
-	 *      (u32)a1=actual length of latest VIC VIF-CONFIG-INFO TLV */
+	 * For HPP toggle:
+	 * adapter-info-get
+	 * in:  (u64)a0=phsical address of buffer passed in from caller.
+	 *      (u16)a1=size of buffer specified in a0.
+	 * out: (u64)a0=phsical address of buffer passed in from caller.
+	 *      (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or
+	 *              0 if no VIF-CONFIG-INFO TLV was ever received. */
 	CMD_CONFIG_INFO_GET     = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44),
+
+	/* init_prov_info2:
+	 * Variant of CMD_INIT_PROV_INFO, where it will not try to enable
+	 * the vnic until CMD_ENABLE2 is issued.
+	 *     (u64)a0=paddr of vnic_devcmd_provinfo
+	 *     (u32)a1=sizeof provision info */
+	CMD_INIT_PROV_INFO2  = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47),
+
+	/* enable2:
+	 *      (u32)a0=0                  ==> standby
+	 *             =CMD_ENABLE2_ACTIVE ==> active
+	 */
+	CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48),
+
+	/*
+	 * cmd_status:
+	 *     Returns the status of the specified command
+	 * Input:
+	 *     a0 = command for which status is being queried.
+	 *          Possible values are:
+	 *              CMD_SOFT_RESET
+	 *              CMD_HANG_RESET
+	 *              CMD_OPEN
+	 *              CMD_INIT
+	 *              CMD_INIT_PROV_INFO
+	 *              CMD_DEINIT
+	 *              CMD_INIT_PROV_INFO2
+	 *              CMD_ENABLE2
+	 * Output:
+	 *     if status == STAT_ERROR
+	 *        a0 = ERR_ENOTSUPPORTED - status for command in a0 is
+	 *                                 not supported
+	 *     if status == STAT_NONE
+	 *        a0 = status of the devcmd specified in a0 as follows.
+	 *             ERR_SUCCESS   - command in a0 completed successfully
+	 *             ERR_EINPROGRESS - command in a0 is still in progress
+	 */
+	CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49),
 };
 
+/* CMD_ENABLE2 flags */
+#define CMD_ENABLE2_ACTIVE  0x1
+
 /* flags for CMD_OPEN */
 #define CMD_OPENF_OPROM		0x1	/* open coming from option rom */
 
@@ -315,6 +360,8 @@ enum vnic_devcmd_error {
 	ERR_ETIMEDOUT = 8,
 	ERR_ELINKDOWN = 9,
 	ERR_EMAXRES = 10,
+	ERR_ENOTSUPPORTED = 11,
+	ERR_EINPROGRESS = 12,
 };
 
 /*
diff --git a/drivers/net/enic/vnic_vic.c b/drivers/net/enic/vnic_vic.c
index 4725b79de0e..24ef8cd4054 100644
--- a/drivers/net/enic/vnic_vic.c
+++ b/drivers/net/enic/vnic_vic.c
@@ -23,7 +23,8 @@
 
 #include "vnic_vic.h"
 
-struct vic_provinfo *vic_provinfo_alloc(gfp_t flags, u8 *oui, u8 type)
+struct vic_provinfo *vic_provinfo_alloc(gfp_t flags, const u8 *oui,
+	const u8 type)
 {
 	struct vic_provinfo *vp;
 
@@ -47,7 +48,7 @@ void vic_provinfo_free(struct vic_provinfo *vp)
 }
 
 int vic_provinfo_add_tlv(struct vic_provinfo *vp, u16 type, u16 length,
-	void *value)
+	const void *value)
 {
 	struct vic_provinfo_tlv *tlv;
 
diff --git a/drivers/net/enic/vnic_vic.h b/drivers/net/enic/vnic_vic.h
index f700f5d9e81..9ef81f14835 100644
--- a/drivers/net/enic/vnic_vic.h
+++ b/drivers/net/enic/vnic_vic.h
@@ -47,6 +47,7 @@ enum vic_generic_prov_os_type {
 	VIC_GENERIC_PROV_OS_TYPE_ESX = 1,
 	VIC_GENERIC_PROV_OS_TYPE_LINUX = 2,
 	VIC_GENERIC_PROV_OS_TYPE_WINDOWS = 3,
+	VIC_GENERIC_PROV_OS_TYPE_SOLARIS = 4,
 };
 
 struct vic_provinfo {
@@ -61,14 +62,22 @@ struct vic_provinfo {
 	} tlv[0];
 } __packed;
 
+#define VIC_PROVINFO_ADD_TLV(vp, tlvtype, tlvlen, data) \
+	do { \
+		err = vic_provinfo_add_tlv(vp, tlvtype, tlvlen, data); \
+		if (err) \
+			goto add_tlv_failure; \
+	} while (0)
+
 #define VIC_PROVINFO_MAX_DATA		1385
 #define VIC_PROVINFO_MAX_TLV_DATA (VIC_PROVINFO_MAX_DATA - \
 	sizeof(struct vic_provinfo))
 
-struct vic_provinfo *vic_provinfo_alloc(gfp_t flags, u8 *oui, u8 type);
+struct vic_provinfo *vic_provinfo_alloc(gfp_t flags, const u8 *oui,
+	const u8 type);
 void vic_provinfo_free(struct vic_provinfo *vp);
 int vic_provinfo_add_tlv(struct vic_provinfo *vp, u16 type, u16 length,
-	void *value);
+	const void *value);
 size_t vic_provinfo_size(struct vic_provinfo *vp);
 
 #endif	/* _VNIC_VIC_H_ */
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
index fb717be511f..12d28e9d0cb 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -13,7 +13,7 @@
    This driver supports following cards :
 	- ICL EtherTeam 16i
 	- ICL EtherTeam 32 EISA
-	  (Uses true 32 bit transfers rather than 16i compability mode)
+	  (Uses true 32 bit transfers rather than 16i compatibility mode)
 
    Example Module usage:
         insmod eth16i.o io=0x2a0 mediatype=bnc
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index db0290f05bd..a83dd312c3a 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -542,7 +542,7 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id)
 
 	/* Figure out what triggered the interrupt...
 	 * The tricky bit here is that the interrupt source bits get
-	 * set in INT_SOURCE for an event irregardless of whether that
+	 * set in INT_SOURCE for an event regardless of whether that
 	 * event is masked or not.  Thus, in order to figure out what
 	 * triggered the interrupt, we need to remove the sources
 	 * for all events that are currently masked.  This behaviour
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index 380d0614a89..b5f6173130f 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -1545,7 +1545,7 @@ static int ewrk3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	}
 
 	ecmd->supported |= SUPPORTED_10baseT_Half;
-	ecmd->speed = SPEED_10;
+	ethtool_cmd_speed_set(ecmd, SPEED_10);
 	ecmd->duplex = DUPLEX_HALF;
 	return 0;
 }
@@ -1604,55 +1604,47 @@ static u32 ewrk3_get_link(struct net_device *dev)
 	return !(cmr & CMR_LINK);
 }
 
-static int ewrk3_phys_id(struct net_device *dev, u32 data)
+static int ewrk3_set_phys_id(struct net_device *dev,
+			     enum ethtool_phys_id_state state)
 {
 	struct ewrk3_private *lp = netdev_priv(dev);
 	unsigned long iobase = dev->base_addr;
-	unsigned long flags;
 	u8 cr;
-	int count;
-
-	/* Toggle LED 4x per second */
-	count = data << 2;
 
-	spin_lock_irqsave(&lp->hw_lock, flags);
-
-	/* Bail if a PHYS_ID is already in progress */
-	if (lp->led_mask == 0) {
-		spin_unlock_irqrestore(&lp->hw_lock, flags);
-		return -EBUSY;
-	}
+	spin_lock_irq(&lp->hw_lock);
 
-	/* Prevent ISR from twiddling the LED */
-	lp->led_mask = 0;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		/* Prevent ISR from twiddling the LED */
+		lp->led_mask = 0;
+		spin_unlock_irq(&lp->hw_lock);
+		return 2;	/* cycle on/off twice per second */
 
-	while (count--) {
-		/* Toggle the LED */
+	case ETHTOOL_ID_ON:
 		cr = inb(EWRK3_CR);
-		outb(cr ^ CR_LED, EWRK3_CR);
+		outb(cr | CR_LED, EWRK3_CR);
+		break;
 
-		/* Wait a little while */
-		spin_unlock_irqrestore(&lp->hw_lock, flags);
-		msleep(250);
-		spin_lock_irqsave(&lp->hw_lock, flags);
+	case ETHTOOL_ID_OFF:
+		cr = inb(EWRK3_CR);
+		outb(cr & ~CR_LED, EWRK3_CR);
+		break;
 
-		/* Exit if we got a signal */
-		if (signal_pending(current))
-			break;
+	case ETHTOOL_ID_INACTIVE:
+		lp->led_mask = CR_LED;
+		cr = inb(EWRK3_CR);
+		outb(cr & ~CR_LED, EWRK3_CR);
 	}
+	spin_unlock_irq(&lp->hw_lock);
 
-	lp->led_mask = CR_LED;
-	cr = inb(EWRK3_CR);
-	outb(cr & ~CR_LED, EWRK3_CR);
-	spin_unlock_irqrestore(&lp->hw_lock, flags);
-	return signal_pending(current) ? -ERESTARTSYS : 0;
+	return 0;
 }
 
 static const struct ethtool_ops ethtool_ops_203 = {
 	.get_drvinfo = ewrk3_get_drvinfo,
 	.get_settings = ewrk3_get_settings,
 	.set_settings = ewrk3_set_settings,
-	.phys_id = ewrk3_phys_id,
+	.set_phys_id = ewrk3_set_phys_id,
 };
 
 static const struct ethtool_ops ethtool_ops = {
@@ -1660,7 +1652,7 @@ static const struct ethtool_ops ethtool_ops = {
 	.get_settings = ewrk3_get_settings,
 	.set_settings = ewrk3_set_settings,
 	.get_link = ewrk3_get_link,
-	.phys_id = ewrk3_phys_id,
+	.set_phys_id = ewrk3_set_phys_id,
 };
 
 /*
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index ace318df4c8..8b2c6d797e6 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -97,11 +97,11 @@ struct bufdesc {
  *	The following definitions courtesy of commproc.h, which where
  *	Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
  */
-#define BD_SC_EMPTY     ((ushort)0x8000)        /* Recieve is empty */
+#define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
 #define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
 #define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
 #define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
-#define BD_SC_CM        ((ushort)0x0200)        /* Continous mode */
+#define BD_SC_CM        ((ushort)0x0200)        /* Continuous mode */
 #define BD_SC_ID        ((ushort)0x0100)        /* Rec'd too many idles */
 #define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
 #define BD_SC_BR        ((ushort)0x0020)        /* Break received */
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 7b92897ca66..d09e8b0add0 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -440,7 +440,7 @@ union ring_type {
 #define NV_RX3_VLAN_TAG_PRESENT (1<<16)
 #define NV_RX3_VLAN_TAG_MASK	(0x0000FFFF)
 
-/* Miscelaneous hardware related defines: */
+/* Miscellaneous hardware related defines: */
 #define NV_PCI_REGSZ_VER1	0x270
 #define NV_PCI_REGSZ_VER2	0x2d4
 #define NV_PCI_REGSZ_VER3	0x604
@@ -774,7 +774,6 @@ struct fe_priv {
 	u32 driver_data;
 	u32 device_id;
 	u32 register_size;
-	int rx_csum;
 	u32 mac_in_use;
 	int mgmt_version;
 	int mgmt_sema;
@@ -1488,7 +1487,7 @@ static int phy_init(struct net_device *dev)
 		}
 	}
 
-	/* some phys clear out pause advertisment on reset, set it back */
+	/* some phys clear out pause advertisement on reset, set it back */
 	mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg);
 
 	/* restart auto negotiation, power down phy */
@@ -2535,7 +2534,7 @@ static void nv_tx_timeout(struct net_device *dev)
 	else
 		nv_tx_done_optimized(dev, np->tx_ring_size);
 
-	/* save current HW postion */
+	/* save current HW position */
 	if (np->tx_change_owner)
 		put_tx.ex = np->tx_change_owner->first_tx_desc;
 	else
@@ -3956,6 +3955,7 @@ static int nv_set_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo)
 static int nv_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
 	struct fe_priv *np = netdev_priv(dev);
+	u32 speed;
 	int adv;
 
 	spin_lock_irq(&np->lock);
@@ -3975,23 +3975,26 @@ static int nv_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	if (netif_carrier_ok(dev)) {
 		switch (np->linkspeed & (NVREG_LINKSPEED_MASK)) {
 		case NVREG_LINKSPEED_10:
-			ecmd->speed = SPEED_10;
+			speed = SPEED_10;
 			break;
 		case NVREG_LINKSPEED_100:
-			ecmd->speed = SPEED_100;
+			speed = SPEED_100;
 			break;
 		case NVREG_LINKSPEED_1000:
-			ecmd->speed = SPEED_1000;
+			speed = SPEED_1000;
+			break;
+		default:
+			speed = -1;
 			break;
 		}
 		ecmd->duplex = DUPLEX_HALF;
 		if (np->duplex)
 			ecmd->duplex = DUPLEX_FULL;
 	} else {
-		ecmd->speed = -1;
+		speed = -1;
 		ecmd->duplex = -1;
 	}
-
+	ethtool_cmd_speed_set(ecmd, speed);
 	ecmd->autoneg = np->autoneg;
 
 	ecmd->advertising = ADVERTISED_MII;
@@ -4030,6 +4033,7 @@ static int nv_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
 	struct fe_priv *np = netdev_priv(dev);
+	u32 speed = ethtool_cmd_speed(ecmd);
 
 	if (ecmd->port != PORT_MII)
 		return -EINVAL;
@@ -4053,9 +4057,9 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
 	} else if (ecmd->autoneg == AUTONEG_DISABLE) {
 		/* Note: autonegotiation disable, speed 1000 intentionally
-		 * forbidden - noone should need that. */
+		 * forbidden - no one should need that. */
 
-		if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+		if (speed != SPEED_10 && speed != SPEED_100)
 			return -EINVAL;
 		if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
 			return -EINVAL;
@@ -4103,7 +4107,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 			adv |= ADVERTISE_100HALF;
 		if (ecmd->advertising & ADVERTISED_100baseT_Full)
 			adv |= ADVERTISE_100FULL;
-		if (np->pause_flags & NV_PAUSEFRAME_RX_REQ)  /* for rx we set both advertisments but disable tx pause */
+		if (np->pause_flags & NV_PAUSEFRAME_RX_REQ)  /* for rx we set both advertisements but disable tx pause */
 			adv |=  ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 		if (np->pause_flags & NV_PAUSEFRAME_TX_REQ)
 			adv |=  ADVERTISE_PAUSE_ASYM;
@@ -4139,16 +4143,16 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
 		adv = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
 		adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-		if (ecmd->speed == SPEED_10 && ecmd->duplex == DUPLEX_HALF)
+		if (speed == SPEED_10 && ecmd->duplex == DUPLEX_HALF)
 			adv |= ADVERTISE_10HALF;
-		if (ecmd->speed == SPEED_10 && ecmd->duplex == DUPLEX_FULL)
+		if (speed == SPEED_10 && ecmd->duplex == DUPLEX_FULL)
 			adv |= ADVERTISE_10FULL;
-		if (ecmd->speed == SPEED_100 && ecmd->duplex == DUPLEX_HALF)
+		if (speed == SPEED_100 && ecmd->duplex == DUPLEX_HALF)
 			adv |= ADVERTISE_100HALF;
-		if (ecmd->speed == SPEED_100 && ecmd->duplex == DUPLEX_FULL)
+		if (speed == SPEED_100 && ecmd->duplex == DUPLEX_FULL)
 			adv |= ADVERTISE_100FULL;
 		np->pause_flags &= ~(NV_PAUSEFRAME_AUTONEG|NV_PAUSEFRAME_RX_ENABLE|NV_PAUSEFRAME_TX_ENABLE);
-		if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) {/* for rx we set both advertisments but disable tx pause */
+		if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) {/* for rx we set both advertisements but disable tx pause */
 			adv |=  ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 			np->pause_flags |= NV_PAUSEFRAME_RX_ENABLE;
 		}
@@ -4264,16 +4268,6 @@ static int nv_nway_reset(struct net_device *dev)
 	return ret;
 }
 
-static int nv_set_tso(struct net_device *dev, u32 value)
-{
-	struct fe_priv *np = netdev_priv(dev);
-
-	if ((np->driver_data & DEV_HAS_CHECKSUM))
-		return ethtool_op_set_tso(dev, value);
-	else
-		return -EOPNOTSUPP;
-}
-
 static void nv_get_ringparam(struct net_device *dev, struct ethtool_ringparam* ring)
 {
 	struct fe_priv *np = netdev_priv(dev);
@@ -4449,7 +4443,7 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*
 
 		adv = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
 		adv &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-		if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) /* for rx we set both advertisments but disable tx pause */
+		if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) /* for rx we set both advertisements but disable tx pause */
 			adv |=  ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 		if (np->pause_flags & NV_PAUSEFRAME_TX_REQ)
 			adv |=  ADVERTISE_PAUSE_ASYM;
@@ -4480,58 +4474,36 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*
 	return 0;
 }
 
-static u32 nv_get_rx_csum(struct net_device *dev)
+static u32 nv_fix_features(struct net_device *dev, u32 features)
 {
-	struct fe_priv *np = netdev_priv(dev);
-	return np->rx_csum != 0;
+	/* vlan is dependent on rx checksum offload */
+	if (features & (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX))
+		features |= NETIF_F_RXCSUM;
+
+	return features;
 }
 
-static int nv_set_rx_csum(struct net_device *dev, u32 data)
+static int nv_set_features(struct net_device *dev, u32 features)
 {
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base = get_hwbase(dev);
-	int retcode = 0;
-
-	if (np->driver_data & DEV_HAS_CHECKSUM) {
-		if (data) {
-			np->rx_csum = 1;
-			np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
-		} else {
-			np->rx_csum = 0;
-			/* vlan is dependent on rx checksum offload */
-			if (!(np->vlanctl_bits & NVREG_VLANCONTROL_ENABLE))
-				np->txrxctl_bits &= ~NVREG_TXRXCTL_RXCHECK;
-		}
-		if (netif_running(dev)) {
-			spin_lock_irq(&np->lock);
-			writel(np->txrxctl_bits, base + NvRegTxRxControl);
-			spin_unlock_irq(&np->lock);
-		}
-	} else {
-		return -EINVAL;
-	}
+	u32 changed = dev->features ^ features;
 
-	return retcode;
-}
+	if (changed & NETIF_F_RXCSUM) {
+		spin_lock_irq(&np->lock);
 
-static int nv_set_tx_csum(struct net_device *dev, u32 data)
-{
-	struct fe_priv *np = netdev_priv(dev);
+		if (features & NETIF_F_RXCSUM)
+			np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
+		else
+			np->txrxctl_bits &= ~NVREG_TXRXCTL_RXCHECK;
 
-	if (np->driver_data & DEV_HAS_CHECKSUM)
-		return ethtool_op_set_tx_csum(dev, data);
-	else
-		return -EOPNOTSUPP;
-}
+		if (netif_running(dev))
+			writel(np->txrxctl_bits, base + NvRegTxRxControl);
 
-static int nv_set_sg(struct net_device *dev, u32 data)
-{
-	struct fe_priv *np = netdev_priv(dev);
+		spin_unlock_irq(&np->lock);
+	}
 
-	if (np->driver_data & DEV_HAS_CHECKSUM)
-		return ethtool_op_set_sg(dev, data);
-	else
-		return -EOPNOTSUPP;
+	return 0;
 }
 
 static int nv_get_sset_count(struct net_device *dev, int sset)
@@ -4896,15 +4868,10 @@ static const struct ethtool_ops ops = {
 	.get_regs_len = nv_get_regs_len,
 	.get_regs = nv_get_regs,
 	.nway_reset = nv_nway_reset,
-	.set_tso = nv_set_tso,
 	.get_ringparam = nv_get_ringparam,
 	.set_ringparam = nv_set_ringparam,
 	.get_pauseparam = nv_get_pauseparam,
 	.set_pauseparam = nv_set_pauseparam,
-	.get_rx_csum = nv_get_rx_csum,
-	.set_rx_csum = nv_set_rx_csum,
-	.set_tx_csum = nv_set_tx_csum,
-	.set_sg = nv_set_sg,
 	.get_strings = nv_get_strings,
 	.get_ethtool_stats = nv_get_ethtool_stats,
 	.get_sset_count = nv_get_sset_count,
@@ -5235,6 +5202,8 @@ static const struct net_device_ops nv_netdev_ops = {
 	.ndo_start_xmit		= nv_start_xmit,
 	.ndo_tx_timeout		= nv_tx_timeout,
 	.ndo_change_mtu		= nv_change_mtu,
+	.ndo_fix_features	= nv_fix_features,
+	.ndo_set_features	= nv_set_features,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= nv_set_mac_address,
 	.ndo_set_multicast_list	= nv_set_multicast,
@@ -5251,6 +5220,8 @@ static const struct net_device_ops nv_netdev_ops_optimized = {
 	.ndo_start_xmit		= nv_start_xmit_optimized,
 	.ndo_tx_timeout		= nv_tx_timeout,
 	.ndo_change_mtu		= nv_change_mtu,
+	.ndo_fix_features	= nv_fix_features,
+	.ndo_set_features	= nv_set_features,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= nv_set_mac_address,
 	.ndo_set_multicast_list	= nv_set_multicast,
@@ -5364,11 +5335,10 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		np->pkt_limit = NV_PKTLIMIT_2;
 
 	if (id->driver_data & DEV_HAS_CHECKSUM) {
-		np->rx_csum = 1;
 		np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
-		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
-		dev->features |= NETIF_F_TSO;
-		dev->features |= NETIF_F_GRO;
+		dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG |
+			NETIF_F_TSO | NETIF_F_RXCSUM;
+		dev->features |= dev->hw_features;
 	}
 
 	np->vlanctl_bits = 0;
@@ -5384,7 +5354,6 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		np->pause_flags |= NV_PAUSEFRAME_TX_CAPABLE | NV_PAUSEFRAME_TX_REQ;
 	}
 
-
 	err = -ENOMEM;
 	np->base = ioremap(addr, np->register_size);
 	if (!np->base)
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 24cb953900d..21abb5c01a5 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -956,8 +956,6 @@ static const struct ethtool_ops fs_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
 	.get_msglevel = fs_get_msglevel,
 	.set_msglevel = fs_set_msglevel,
-	.set_tx_csum = ethtool_op_set_tx_csum,	/* local! */
-	.set_sg = ethtool_op_set_sg,
 	.get_regs = fs_get_regs,
 };
 
@@ -998,8 +996,10 @@ static const struct net_device_ops fs_enet_netdev_ops = {
 #endif
 };
 
+static struct of_device_id fs_enet_match[];
 static int __devinit fs_enet_probe(struct platform_device *ofdev)
 {
+	const struct of_device_id *match;
 	struct net_device *ndev;
 	struct fs_enet_private *fep;
 	struct fs_platform_info *fpi;
@@ -1007,14 +1007,15 @@ static int __devinit fs_enet_probe(struct platform_device *ofdev)
 	const u8 *mac_addr;
 	int privsize, len, ret = -ENODEV;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(fs_enet_match, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
 
 	fpi = kzalloc(sizeof(*fpi), GFP_KERNEL);
 	if (!fpi)
 		return -ENOMEM;
 
-	if (!IS_FEC(ofdev->dev.of_match)) {
+	if (!IS_FEC(match)) {
 		data = of_get_property(ofdev->dev.of_node, "fsl,cpm-command", &len);
 		if (!data || len != 4)
 			goto out_free_fpi;
@@ -1049,7 +1050,7 @@ static int __devinit fs_enet_probe(struct platform_device *ofdev)
 	fep->dev = &ofdev->dev;
 	fep->ndev = ndev;
 	fep->fpi = fpi;
-	fep->ops = ofdev->dev.of_match->data;
+	fep->ops = match->data;
 
 	ret = fep->ops->setup_data(ndev);
 	if (ret)
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 61035fc5599..b9fbc83d64a 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -226,8 +226,8 @@ static void set_multicast_finish(struct net_device *dev)
 	}
 
 	FC(fecp, r_cntrl, FEC_RCNTRL_PROM);
-	FW(fecp, hash_table_high, fep->fec.hthi);
-	FW(fecp, hash_table_low, fep->fec.htlo);
+	FW(fecp, grp_hash_table_high, fep->fec.hthi);
+	FW(fecp, grp_hash_table_low, fep->fec.htlo);
 }
 
 static void set_multicast_list(struct net_device *dev)
@@ -273,8 +273,8 @@ static void restart(struct net_device *dev)
 	/*
 	 * Reset all multicast.
 	 */
-	FW(fecp, hash_table_high, fep->fec.hthi);
-	FW(fecp, hash_table_low, fep->fec.htlo);
+	FW(fecp, grp_hash_table_high, fep->fec.hthi);
+	FW(fecp, grp_hash_table_low, fep->fec.htlo);
 
 	/*
 	 * Set maximum receive buffer size.
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 7e840d373ab..6a2e150e75b 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -101,17 +101,20 @@ static int fs_enet_fec_mii_reset(struct mii_bus *bus)
 	return 0;
 }
 
+static struct of_device_id fs_enet_mdio_fec_match[];
 static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev)
 {
+	const struct of_device_id *match;
 	struct resource res;
 	struct mii_bus *new_bus;
 	struct fec_info *fec;
 	int (*get_bus_freq)(struct device_node *);
 	int ret = -ENOMEM, clock, speed;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(fs_enet_mdio_fec_match, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
-	get_bus_freq = ofdev->dev.of_match->data;
+	get_bus_freq = match->data;
 
 	new_bus = mdiobus_alloc();
 	if (!new_bus)
diff --git a/drivers/net/ftmac100.c b/drivers/net/ftmac100.c
index a31661948c4..9bd7746cbfc 100644
--- a/drivers/net/ftmac100.c
+++ b/drivers/net/ftmac100.c
@@ -139,11 +139,11 @@ static int ftmac100_reset(struct ftmac100 *priv)
 			 * that hardware reset completed (what the f*ck).
 			 * We still need to wait for a while.
 			 */
-			usleep_range(500, 1000);
+			udelay(500);
 			return 0;
 		}
 
-		usleep_range(1000, 10000);
+		udelay(1000);
 	}
 
 	netdev_err(netdev, "software reset failed\n");
@@ -772,7 +772,7 @@ static int ftmac100_mdio_read(struct net_device *netdev, int phy_id, int reg)
 		if ((phycr & FTMAC100_PHYCR_MIIRD) == 0)
 			return phycr & FTMAC100_PHYCR_MIIRDATA;
 
-		usleep_range(100, 1000);
+		udelay(100);
 	}
 
 	netdev_err(netdev, "mdio read timed out\n");
@@ -801,7 +801,7 @@ static void ftmac100_mdio_write(struct net_device *netdev, int phy_id, int reg,
 		if ((phycr & FTMAC100_PHYCR_MIIWR) == 0)
 			return;
 
-		usleep_range(100, 1000);
+		udelay(100);
 	}
 
 	netdev_err(netdev, "mdio write timed out\n");
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 2a0ad9a501b..ff60b23a5b7 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -365,7 +365,7 @@ static void gfar_init_mac(struct net_device *ndev)
 		gfar_write(&regs->rir0, DEFAULT_RIR0);
 	}
 
-	if (priv->rx_csum_enable)
+	if (ndev->features & NETIF_F_RXCSUM)
 		rctrl |= RCTRL_CHECKSUMMING;
 
 	if (priv->extended_hash) {
@@ -463,6 +463,7 @@ static const struct net_device_ops gfar_netdev_ops = {
 	.ndo_start_xmit = gfar_start_xmit,
 	.ndo_stop = gfar_close,
 	.ndo_change_mtu = gfar_change_mtu,
+	.ndo_set_features = gfar_set_features,
 	.ndo_set_multicast_list = gfar_set_multi,
 	.ndo_tx_timeout = gfar_timeout,
 	.ndo_do_ioctl = gfar_ioctl,
@@ -513,7 +514,7 @@ void unlock_tx_qs(struct gfar_private *priv)
 /* Returns 1 if incoming frames use an FCB */
 static inline int gfar_uses_fcb(struct gfar_private *priv)
 {
-	return priv->vlgrp || priv->rx_csum_enable ||
+	return priv->vlgrp || (priv->ndev->features & NETIF_F_RXCSUM) ||
 		(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER);
 }
 
@@ -1030,10 +1031,11 @@ static int gfar_probe(struct platform_device *ofdev)
 		netif_napi_add(dev, &priv->gfargrp[i].napi, gfar_poll, GFAR_DEV_WEIGHT);
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
-		priv->rx_csum_enable = 1;
-		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
-	} else
-		priv->rx_csum_enable = 0;
+		dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+			NETIF_F_RXCSUM;
+		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG |
+			NETIF_F_RXCSUM | NETIF_F_HIGHDMA;
+	}
 
 	priv->vlgrp = NULL;
 
@@ -2697,7 +2699,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
 	if (priv->padding)
 		skb_pull(skb, priv->padding);
 
-	if (priv->rx_csum_enable)
+	if (dev->features & NETIF_F_RXCSUM)
 		gfar_rx_checksum(skb, fcb);
 
 	/* Tell the skb what kind of packet this is */
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index ec5d595ce2e..fc86f519544 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -382,23 +382,6 @@ extern const char gfar_driver_version[];
 #define BD_LFLAG(flags) ((flags) << 16)
 #define BD_LENGTH_MASK		0x0000ffff
 
-#define CLASS_CODE_UNRECOG		0x00
-#define CLASS_CODE_DUMMY1		0x01
-#define CLASS_CODE_ETHERTYPE1		0x02
-#define CLASS_CODE_ETHERTYPE2		0x03
-#define CLASS_CODE_USER_PROG1		0x04
-#define CLASS_CODE_USER_PROG2		0x05
-#define CLASS_CODE_USER_PROG3		0x06
-#define CLASS_CODE_USER_PROG4		0x07
-#define CLASS_CODE_TCP_IPV4		0x08
-#define CLASS_CODE_UDP_IPV4		0x09
-#define CLASS_CODE_AH_ESP_IPV4		0x0a
-#define CLASS_CODE_SCTP_IPV4		0x0b
-#define CLASS_CODE_TCP_IPV6		0x0c
-#define CLASS_CODE_UDP_IPV6		0x0d
-#define CLASS_CODE_AH_ESP_IPV6		0x0e
-#define CLASS_CODE_SCTP_IPV6		0x0f
-
 #define FPR_FILER_MASK	0xFFFFFFFF
 #define MAX_FILER_IDX	0xFF
 
@@ -1043,7 +1026,7 @@ enum gfar_errata {
 };
 
 /* Struct stolen almost completely (and shamelessly) from the FCC enet source
- * (Ok, that's not so true anymore, but there is a family resemblence)
+ * (Ok, that's not so true anymore, but there is a family resemblance)
  * The GFAR buffer descriptors track the ring buffers.  The rx_bd_base
  * and tx_bd_base always point to the currently available buffer.
  * The dirty_tx tracks the current buffer that is being sent by the
@@ -1100,7 +1083,7 @@ struct gfar_private {
 	struct device_node *phy_node;
 	struct device_node *tbi_node;
 	u32 device_flags;
-	unsigned char rx_csum_enable:1,
+	unsigned char
 		extended_hash:1,
 		bd_stash_en:1,
 		rx_filer_enable:1,
@@ -1170,6 +1153,7 @@ extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
 extern void gfar_configure_coalescing(struct gfar_private *priv,
 		unsigned long tx_mask, unsigned long rx_mask);
 void gfar_init_sysfs(struct net_device *dev);
+int gfar_set_features(struct net_device *dev, u32 features);
 
 extern const struct ethtool_ops gfar_ethtool_ops;
 
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 3bc8e276ba4..493d743839d 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -517,15 +517,15 @@ static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rva
 	return err;
 }
 
-static int gfar_set_rx_csum(struct net_device *dev, uint32_t data)
+int gfar_set_features(struct net_device *dev, u32 features)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
 	int err = 0, i = 0;
+	u32 changed = dev->features ^ features;
 
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
-		return -EOPNOTSUPP;
-
+	if (!(changed & NETIF_F_RXCSUM))
+		return 0;
 
 	if (dev->flags & IFF_UP) {
 		/* Halt TX and RX, and process the frames which
@@ -546,58 +546,15 @@ static int gfar_set_rx_csum(struct net_device *dev, uint32_t data)
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
-	}
 
-	spin_lock_irqsave(&priv->bflock, flags);
-	priv->rx_csum_enable = data;
-	spin_unlock_irqrestore(&priv->bflock, flags);
+		dev->features = features;
 
-	if (dev->flags & IFF_UP) {
 		err = startup_gfar(dev);
 		netif_tx_wake_all_queues(dev);
 	}
 	return err;
 }
 
-static uint32_t gfar_get_rx_csum(struct net_device *dev)
-{
-	struct gfar_private *priv = netdev_priv(dev);
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
-		return 0;
-
-	return priv->rx_csum_enable;
-}
-
-static int gfar_set_tx_csum(struct net_device *dev, uint32_t data)
-{
-	struct gfar_private *priv = netdev_priv(dev);
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
-		return -EOPNOTSUPP;
-
-	netif_tx_lock_bh(dev);
-
-	if (data)
-		dev->features |= NETIF_F_IP_CSUM;
-	else
-		dev->features &= ~NETIF_F_IP_CSUM;
-
-	netif_tx_unlock_bh(dev);
-
-	return 0;
-}
-
-static uint32_t gfar_get_tx_csum(struct net_device *dev)
-{
-	struct gfar_private *priv = netdev_priv(dev);
-
-	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
-		return 0;
-
-	return (dev->features & NETIF_F_IP_CSUM) != 0;
-}
-
 static uint32_t gfar_get_msglevel(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
@@ -645,42 +602,6 @@ static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 }
 #endif
 
-static int gfar_ethflow_to_class(int flow_type, u64 *class)
-{
-	switch (flow_type) {
-	case TCP_V4_FLOW:
-		*class = CLASS_CODE_TCP_IPV4;
-		break;
-	case UDP_V4_FLOW:
-		*class = CLASS_CODE_UDP_IPV4;
-		break;
-	case AH_V4_FLOW:
-	case ESP_V4_FLOW:
-		*class = CLASS_CODE_AH_ESP_IPV4;
-		break;
-	case SCTP_V4_FLOW:
-		*class = CLASS_CODE_SCTP_IPV4;
-		break;
-	case TCP_V6_FLOW:
-		*class = CLASS_CODE_TCP_IPV6;
-		break;
-	case UDP_V6_FLOW:
-		*class = CLASS_CODE_UDP_IPV6;
-		break;
-	case AH_V6_FLOW:
-	case ESP_V6_FLOW:
-		*class = CLASS_CODE_AH_ESP_IPV6;
-		break;
-	case SCTP_V6_FLOW:
-		*class = CLASS_CODE_SCTP_IPV6;
-		break;
-	default:
-		return 0;
-	}
-
-	return 1;
-}
-
 static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow)
 {
 	u32 fcr = 0x0, fpr = FPR_FILER_MASK;
@@ -778,11 +699,6 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
 	case UDP_V6_FLOW:
 		cmp_rqfpr = RQFPR_IPV6 |RQFPR_UDP;
 		break;
-	case IPV4_FLOW:
-		cmp_rqfpr = RQFPR_IPV4;
-	case IPV6_FLOW:
-		cmp_rqfpr = RQFPR_IPV6;
-		break;
 	default:
 		printk(KERN_ERR "Right now this class is not supported\n");
 		return 0;
@@ -848,18 +764,9 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
 
 static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd)
 {
-	u64 class;
-
-	if (!gfar_ethflow_to_class(cmd->flow_type, &class))
-		return -EINVAL;
-
-	if (class < CLASS_CODE_USER_PROG1 ||
-			class > CLASS_CODE_SCTP_IPV6)
-		return -EINVAL;
-
 	/* write the filer rules here */
 	if (!gfar_ethflow_to_filer_table(priv, cmd->data, cmd->flow_type))
-		return -1;
+		return -EINVAL;
 
 	return 0;
 }
@@ -894,11 +801,6 @@ const struct ethtool_ops gfar_ethtool_ops = {
 	.get_strings = gfar_gstrings,
 	.get_sset_count = gfar_sset_count,
 	.get_ethtool_stats = gfar_fill_stats,
-	.get_rx_csum = gfar_get_rx_csum,
-	.get_tx_csum = gfar_get_tx_csum,
-	.set_rx_csum = gfar_set_rx_csum,
-	.set_tx_csum = gfar_set_tx_csum,
-	.set_sg = ethtool_op_set_sg,
 	.get_msglevel = gfar_get_msglevel,
 	.set_msglevel = gfar_set_msglevel,
 #ifdef CONFIG_PM
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 396ff7d785d..f181304a7ab 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -901,7 +901,7 @@ static int greth_rx_gbit(struct net_device *dev, int limit)
 
 				skb_put(skb, pkt_len);
 
-				if (greth->flags & GRETH_FLAG_RX_CSUM && hw_checksummed(status))
+				if (dev->features & NETIF_F_RXCSUM && hw_checksummed(status))
 					skb->ip_summed = CHECKSUM_UNNECESSARY;
 				else
 					skb_checksum_none_assert(skb);
@@ -1142,41 +1142,6 @@ static void greth_get_regs(struct net_device *dev, struct ethtool_regs *regs, vo
 		buff[i] = greth_read_bd(&greth_regs[i]);
 }
 
-static u32 greth_get_rx_csum(struct net_device *dev)
-{
-	struct greth_private *greth = netdev_priv(dev);
-	return (greth->flags & GRETH_FLAG_RX_CSUM) != 0;
-}
-
-static int greth_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct greth_private *greth = netdev_priv(dev);
-
-	spin_lock_bh(&greth->devlock);
-
-	if (data)
-		greth->flags |= GRETH_FLAG_RX_CSUM;
-	else
-		greth->flags &= ~GRETH_FLAG_RX_CSUM;
-
-	spin_unlock_bh(&greth->devlock);
-
-	return 0;
-}
-
-static u32 greth_get_tx_csum(struct net_device *dev)
-{
-	return (dev->features & NETIF_F_IP_CSUM) != 0;
-}
-
-static int greth_set_tx_csum(struct net_device *dev, u32 data)
-{
-	netif_tx_lock_bh(dev);
-	ethtool_op_set_tx_csum(dev, data);
-	netif_tx_unlock_bh(dev);
-	return 0;
-}
-
 static const struct ethtool_ops greth_ethtool_ops = {
 	.get_msglevel		= greth_get_msglevel,
 	.set_msglevel		= greth_set_msglevel,
@@ -1185,10 +1150,6 @@ static const struct ethtool_ops greth_ethtool_ops = {
 	.get_drvinfo		= greth_get_drvinfo,
 	.get_regs_len           = greth_get_regs_len,
 	.get_regs               = greth_get_regs,
-	.get_rx_csum		= greth_get_rx_csum,
-	.set_rx_csum		= greth_set_rx_csum,
-	.get_tx_csum		= greth_get_tx_csum,
-	.set_tx_csum		= greth_set_tx_csum,
 	.get_link		= ethtool_op_get_link,
 };
 
@@ -1570,9 +1531,10 @@ static int __devinit greth_of_probe(struct platform_device *ofdev)
 	GRETH_REGSAVE(regs->status, 0xFF);
 
 	if (greth->gbit_mac) {
-		dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_HIGHDMA;
+		dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+			NETIF_F_RXCSUM;
+		dev->features = dev->hw_features | NETIF_F_HIGHDMA;
 		greth_netdev_ops.ndo_start_xmit = greth_start_xmit_gbit;
-		greth->flags = GRETH_FLAG_RX_CSUM;
 	}
 
 	if (greth->multicast) {
diff --git a/drivers/net/greth.h b/drivers/net/greth.h
index be0f2062bd1..9a0040dee4d 100644
--- a/drivers/net/greth.h
+++ b/drivers/net/greth.h
@@ -77,9 +77,6 @@
  */
 #define MAX_FRAME_SIZE		1520
 
-/* Flags */
-#define GRETH_FLAG_RX_CSUM 0x1
-
 /* GRETH APB registers */
 struct greth_regs {
 	u32 control;
@@ -133,7 +130,6 @@ struct greth_private {
 	unsigned int duplex;
 
 	u32 msg_enable;
-	u32 flags;
 
 	u8 phyaddr;
 	u8 multicast;
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 80d25ed5334..a09041aa850 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -132,13 +132,8 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 /*
  * RX_CHECKSUM turns on card-generated receive checksum generation for
  *   TCP and UDP packets.  Otherwise the upper layers do the calculation.
- * TX_CHECKSUM won't do anything too useful, even if it works.  There's no
- *   easy mechanism by which to tell the TCP/UDP stack that it need not
- *   generate checksums for this device.  But if somebody can find a way
- *   to get that to work, most of the card work is in here already.
  * 3/10/1999 Pete Wyckoff <wyckoff@ca.sandia.gov>
  */
-#undef  TX_CHECKSUM
 #define RX_CHECKSUM
 
 /* Operational parameters that usually are not changed. */
@@ -630,11 +625,6 @@ static int __devinit hamachi_init_one (struct pci_dev *pdev,
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
-#ifdef TX_CHECKSUM
-	printk("check that skbcopy in ip_queue_xmit isn't happening\n");
-	dev->hard_header_len += 8;  /* for cksum tag */
-#endif
-
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = 1 ? read_eeprom(ioaddr, 4 + i)
 			: readb(ioaddr + StationAddr + i);
@@ -937,11 +927,7 @@ static int hamachi_open(struct net_device *dev)
 
 	/* always 1, takes no more time to do it */
 	writew(0x0001, ioaddr + RxChecksum);
-#ifdef TX_CHECKSUM
-	writew(0x0001, ioaddr + TxChecksum);
-#else
 	writew(0x0000, ioaddr + TxChecksum);
-#endif
 	writew(0x8000, ioaddr + MACCnfg); /* Soft reset the MAC */
 	writew(0x215F, ioaddr + MACCnfg);
 	writew(0x000C, ioaddr + FrameGap0);
@@ -1226,40 +1212,6 @@ static void hamachi_init_ring(struct net_device *dev)
 }
 
 
-#ifdef TX_CHECKSUM
-#define csum_add(it, val) \
-do { \
-    it += (u16) (val); \
-    if (it & 0xffff0000) { \
-	it &= 0xffff; \
-	++it; \
-    } \
-} while (0)
-    /* printk("add %04x --> %04x\n", val, it); \ */
-
-/* uh->len already network format, do not swap */
-#define pseudo_csum_udp(sum,ih,uh) do { \
-    sum = 0; \
-    csum_add(sum, (ih)->saddr >> 16); \
-    csum_add(sum, (ih)->saddr & 0xffff); \
-    csum_add(sum, (ih)->daddr >> 16); \
-    csum_add(sum, (ih)->daddr & 0xffff); \
-    csum_add(sum, cpu_to_be16(IPPROTO_UDP)); \
-    csum_add(sum, (uh)->len); \
-} while (0)
-
-/* swap len */
-#define pseudo_csum_tcp(sum,ih,len) do { \
-    sum = 0; \
-    csum_add(sum, (ih)->saddr >> 16); \
-    csum_add(sum, (ih)->saddr & 0xffff); \
-    csum_add(sum, (ih)->daddr >> 16); \
-    csum_add(sum, (ih)->daddr & 0xffff); \
-    csum_add(sum, cpu_to_be16(IPPROTO_TCP)); \
-    csum_add(sum, htons(len)); \
-} while (0)
-#endif
-
 static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
 				      struct net_device *dev)
 {
@@ -1292,36 +1244,6 @@ static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
 
 	hmp->tx_skbuff[entry] = skb;
 
-#ifdef TX_CHECKSUM
-	{
-	    /* tack on checksum tag */
-	    u32 tagval = 0;
-	    struct ethhdr *eh = (struct ethhdr *)skb->data;
-	    if (eh->h_proto == cpu_to_be16(ETH_P_IP)) {
-		struct iphdr *ih = (struct iphdr *)((char *)eh + ETH_HLEN);
-		if (ih->protocol == IPPROTO_UDP) {
-		    struct udphdr *uh
-		      = (struct udphdr *)((char *)ih + ih->ihl*4);
-		    u32 offset = ((unsigned char *)uh + 6) - skb->data;
-		    u32 pseudo;
-		    pseudo_csum_udp(pseudo, ih, uh);
-		    pseudo = htons(pseudo);
-		    printk("udp cksum was %04x, sending pseudo %04x\n",
-		      uh->check, pseudo);
-		    uh->check = 0;  /* zero out uh->check before card calc */
-		    /*
-		     * start at 14 (skip ethhdr), store at offset (uh->check),
-		     * use pseudo value given.
-		     */
-		    tagval = (14 << 24) | (offset << 16) | pseudo;
-		} else if (ih->protocol == IPPROTO_TCP) {
-		    printk("tcp, no auto cksum\n");
-		}
-	    }
-	    *(u32 *)skb_push(skb, 8) = tagval;
-	}
-#endif
-
         hmp->tx_ring[entry].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
 		skb->data, skb->len, PCI_DMA_TODEVICE));
 
diff --git a/drivers/net/hamradio/Makefile b/drivers/net/hamradio/Makefile
index 9def86704a9..10409607002 100644
--- a/drivers/net/hamradio/Makefile
+++ b/drivers/net/hamradio/Makefile
@@ -3,7 +3,7 @@
 #
 #
 # 19971130 	Moved the amateur radio related network drivers from 
-#		drivers/net/ to drivers/hamradio for easier maintainance.
+#		drivers/net/ to drivers/hamradio for easier maintenance.
 #               Joerg Reuter DL1BKE <jreuter@yaina.de>
 #
 # 20000806	Rewritten to use lists instead of if-statements.
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 8931168d3e7..18d8affecd1 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -516,10 +516,6 @@ static int bpq_new_device(struct net_device *edev)
 	memcpy(bpq->dest_addr, bcast_addr, sizeof(bpq_eth_addr));
 	memcpy(bpq->acpt_addr, bcast_addr, sizeof(bpq_eth_addr));
 
-	err = dev_alloc_name(ndev, ndev->name);
-	if (err < 0) 
-		goto error;
-
 	err = register_netdevice(ndev);
 	if (err)
 		goto error;
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index 7d9ced0738c..96a98d2ff15 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -30,7 +30,7 @@
  *   0.1 F1OAT 07.06.98  Add timer polling routine for channel arbitration
  *   0.2 F6FBB 08.06.98  Added delay after FPGA programming
  *   0.3 F6FBB 29.07.98  Delayed PTT implementation for dupmode=2
- *   0.4 F6FBB 30.07.98  Added TxTail, Slottime and Persistance
+ *   0.4 F6FBB 30.07.98  Added TxTail, Slottime and Persistence
  *   0.5 F6FBB 01.08.98  Shared IRQs, /proc/net and network statistics
  *   0.6 F6FBB 25.08.98  Added 1200Bds format
  *   0.7 F6FBB 12.09.98  Added to the kernel configuration
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8e2c4601b5f..c52a1df5d92 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -180,22 +180,22 @@ struct hp100_private {
 
 	u_int *page_vaddr_algn;	/* Aligned virtual address of allocated page */
 	u_long whatever_offset;	/* Offset to bus/phys/dma address */
-	int rxrcommit;		/* # Rx PDLs commited to adapter */
-	int txrcommit;		/* # Tx PDLs commited to adapter */
+	int rxrcommit;		/* # Rx PDLs committed to adapter */
+	int txrcommit;		/* # Tx PDLs committed to adapter */
 };
 
 /*
  *  variables
  */
 #ifdef CONFIG_ISA
-static const char *hp100_isa_tbl[] = {
+static const char *const hp100_isa_tbl[] __devinitconst = {
 	"HWPF150", /* HP J2573 rev A */
 	"HWP1950", /* HP J2573 */
 };
 #endif
 
 #ifdef CONFIG_EISA
-static struct eisa_device_id hp100_eisa_tbl[] = {
+static const struct eisa_device_id hp100_eisa_tbl[] __devinitconst = {
 	{ "HWPF180" }, /* HP J2577 rev A */
 	{ "HWP1920" }, /* HP 27248B */
 	{ "HWP1940" }, /* HP J2577 */
@@ -336,7 +336,7 @@ static __devinit const char *hp100_read_id(int ioaddr)
 }
 
 #ifdef CONFIG_ISA
-static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
+static __devinit int hp100_isa_probe1(struct net_device *dev, int ioaddr)
 {
 	const char *sig;
 	int i;
@@ -372,7 +372,7 @@ static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
  * EISA and PCI are handled by device infrastructure.
  */
 
-static int  __init hp100_isa_probe(struct net_device *dev, int addr)
+static int  __devinit hp100_isa_probe(struct net_device *dev, int addr)
 {
 	int err = -ENODEV;
 
@@ -396,7 +396,7 @@ static int  __init hp100_isa_probe(struct net_device *dev, int addr)
 #endif /* CONFIG_ISA */
 
 #if !defined(MODULE) && defined(CONFIG_ISA)
-struct net_device * __init hp100_probe(int unit)
+struct net_device * __devinit hp100_probe(int unit)
 {
 	struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
 	int err;
@@ -716,7 +716,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
 	 * implemented/tested only with the lassen chip anyway... */
 	if (lp->mode == 1) {	/* busmaster */
 		dma_addr_t page_baddr;
-		/* Get physically continous memory for TX & RX PDLs    */
+		/* Get physically continuous memory for TX & RX PDLs    */
 		/* Conversion to new PCI API :
 		 * Pages are always aligned and zeroed, no need to it ourself.
 		 * Doc says should be OK for EISA bus as well - Jean II */
@@ -1596,7 +1596,7 @@ drop:
 
 /* clean_txring checks if packets have been sent by the card by reading
  * the TX_PDL register from the performance page and comparing it to the
- * number of commited packets. It then frees the skb's of the packets that
+ * number of committed packets. It then frees the skb's of the packets that
  * obviously have been sent to the network.
  *
  * Needs the PERFORMANCE page selected.
@@ -1617,7 +1617,7 @@ static void hp100_clean_txring(struct net_device *dev)
 
 #ifdef HP100_DEBUG
 	if (donecount > MAX_TX_PDL)
-		printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name);
+		printk("hp100: %s: Warning: More PDLs transmitted than committed to card???\n", dev->name);
 #endif
 
 	for (; 0 != donecount; donecount--) {
@@ -1765,7 +1765,7 @@ drop:
  * Receive Function (Non-Busmaster mode)
  * Called when an "Receive Packet" interrupt occurs, i.e. the receive
  * packet counter is non-zero.
- * For non-busmaster, this function does the whole work of transfering
+ * For non-busmaster, this function does the whole work of transferring
  * the packet to the host memory and then up to higher layers via skb
  * and netif_rx.
  */
@@ -1892,7 +1892,7 @@ static void hp100_rx_bm(struct net_device *dev)
 		/* RX_PKT_CNT states how many PDLs are currently formatted and available to
 		 * the cards BM engine */
 	if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) {
-		printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n",
+		printk("hp100: %s: More packets received than committed? RX_PKT_CNT=0x%x, commit=0x%x\n",
 				     dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff,
 				     lp->rxrcommit);
 		return;
@@ -2256,7 +2256,7 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id)
 		if (lp->mode != 1)	/* non busmaster */
 			hp100_rx(dev);
 		else if (!(val & HP100_RX_PDL_FILL_COMPL)) {
-			/* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt?  */
+			/* Shouldn't happen - maybe we missed a RX_PDL_FILL Interrupt?  */
 			hp100_rx_bm(dev);
 		}
 	}
@@ -2843,7 +2843,7 @@ static void cleanup_dev(struct net_device *d)
 }
 
 #ifdef CONFIG_EISA
-static int __init hp100_eisa_probe (struct device *gendev)
+static int __devinit hp100_eisa_probe (struct device *gendev)
 {
 	struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
 	struct eisa_device *edev = to_eisa_device(gendev);
diff --git a/drivers/net/hp100.h b/drivers/net/hp100.h
index e6ca128a556..b60e96fe38b 100644
--- a/drivers/net/hp100.h
+++ b/drivers/net/hp100.h
@@ -109,7 +109,7 @@
 #define HP100_REG_MAC_CFG_2	0x0d	/* RW: (8) Misc MAC functions        */
 #define HP100_REG_MAC_CFG_3     0x0e	/* RW: (8) Misc MAC functions */
 #define HP100_REG_MAC_CFG_4     0x0f	/* R:  (8) Misc MAC states */
-#define HP100_REG_DROPPED	0x10	/* R:  (16),11:0 Pkts cant fit in mem */
+#define HP100_REG_DROPPED	0x10	/* R:  (16),11:0 Pkts can't fit in mem */
 #define HP100_REG_CRC		0x12	/* R:  (8) Pkts with CRC             */
 #define HP100_REG_ABORT		0x13	/* R:  (8) Aborted Tx pkts           */
 #define HP100_REG_TRAIN_REQUEST 0x14	/* RW: (16) Endnode MAC register. */
diff --git a/drivers/net/hydra.c b/drivers/net/hydra.c
index c5ef62ceb84..1cd481c0420 100644
--- a/drivers/net/hydra.c
+++ b/drivers/net/hydra.c
@@ -98,15 +98,15 @@ static const struct net_device_ops hydra_netdev_ops = {
 	.ndo_open		= hydra_open,
 	.ndo_stop		= hydra_close,
 
-	.ndo_start_xmit		= ei_start_xmit,
-	.ndo_tx_timeout		= ei_tx_timeout,
-	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_start_xmit		= __ei_start_xmit,
+	.ndo_tx_timeout		= __ei_tx_timeout,
+	.ndo_get_stats		= __ei_get_stats,
+	.ndo_set_multicast_list = __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= ei_poll,
+	.ndo_poll_controller	= __ei_poll,
 #endif
 };
 
@@ -125,7 +125,7 @@ static int __devinit hydra_init(struct zorro_dev *z)
 	0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
     };
 
-    dev = alloc_ei_netdev();
+    dev = ____alloc_ei_netdev(0);
     if (!dev)
 	return -ENOMEM;
 
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 3bb990b6651..079450fe5e9 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2053,13 +2053,6 @@ static void emac_ethtool_get_pauseparam(struct net_device *ndev,
 	mutex_unlock(&dev->link_lock);
 }
 
-static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
-{
-	struct emac_instance *dev = netdev_priv(ndev);
-
-	return dev->tah_dev != NULL;
-}
-
 static int emac_get_regs_len(struct emac_instance *dev)
 {
 	if (emac_has_feature(dev, EMAC_FTR_EMAC4))
@@ -2203,15 +2196,11 @@ static const struct ethtool_ops emac_ethtool_ops = {
 	.get_ringparam = emac_ethtool_get_ringparam,
 	.get_pauseparam = emac_ethtool_get_pauseparam,
 
-	.get_rx_csum = emac_ethtool_get_rx_csum,
-
 	.get_strings = emac_ethtool_get_strings,
 	.get_sset_count = emac_ethtool_get_sset_count,
 	.get_ethtool_stats = emac_ethtool_get_ethtool_stats,
 
 	.get_link = ethtool_op_get_link,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.get_sg = ethtool_op_get_sg,
 };
 
 static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
@@ -2859,8 +2848,10 @@ static int __devinit emac_probe(struct platform_device *ofdev)
 	if (err != 0)
 		goto err_detach_tah;
 
-	if (dev->tah_dev)
-		ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+	if (dev->tah_dev) {
+		ndev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG;
+		ndev->features |= ndev->hw_features | NETIF_F_RXCSUM;
+	}
 	ndev->watchdog_timeo = 5 * HZ;
 	if (emac_phy_supports_gige(dev->phy_mode)) {
 		ndev->netdev_ops = &emac_gige_netdev_ops;
diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ibm_newemac/tah.c
index 8ead6a96aba..5f51bf7c9dc 100644
--- a/drivers/net/ibm_newemac/tah.c
+++ b/drivers/net/ibm_newemac/tah.c
@@ -60,7 +60,7 @@ void tah_reset(struct platform_device *ofdev)
 		printk(KERN_ERR "%s: reset timeout\n",
 			ofdev->dev.of_node->full_name);
 
-	/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
+	/* 10KB TAH TX FIFO accommodates the max MTU of 9000 */
 	out_be32(&p->mr,
 		 TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
 		 TAH_MR_DIG);
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 94d9969ec0b..136d7544cc3 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -53,7 +53,7 @@ History:
 	still work with 2.0.x....
   Jan 28th, 2000
 	in Linux 2.2.13, the version.h file mysteriously didn't get
-	included.  Added a workaround for this.  Futhermore, it now
+	included.  Added a workaround for this.  Furthermore, it now
 	not only compiles as a modules ;-)
   Jan 30th, 2000
 	newer kernels automatically probe more than one board, so the
@@ -481,7 +481,7 @@ static void InitBoard(struct net_device *dev)
 	if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt)
 		rcrval |= RCREG_AMC;
 
-	/* promiscous mode ? */
+	/* promiscuous mode ? */
 
 	if (dev->flags & IFF_PROMISC)
 		rcrval |= RCREG_PRO;
@@ -782,7 +782,8 @@ static int ibmlana_open(struct net_device *dev)
 
 	/* register resources - only necessary for IRQ */
 
-	result = request_irq(priv->realirq, irq_handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
+	result = request_irq(priv->realirq, irq_handler, IRQF_SHARED,
+			     dev->name, dev);
 	if (result != 0) {
 		printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq);
 		return result;
@@ -894,12 +895,12 @@ static int ibmlana_irq;
 static int ibmlana_io;
 static int startslot;		/* counts through slots when probing multiple devices */
 
-static short ibmlana_adapter_ids[] __initdata = {
+static const short ibmlana_adapter_ids[] __devinitconst = {
 	IBM_LANA_ID,
 	0x0000
 };
 
-static char *ibmlana_adapter_names[] __devinitdata = {
+static const char *const ibmlana_adapter_names[] __devinitconst = {
 	"IBM LAN Adapter/A",
 	NULL
 };
diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h
index aa3ddbdee4b..accd5efc9c8 100644
--- a/drivers/net/ibmlana.h
+++ b/drivers/net/ibmlana.h
@@ -90,7 +90,7 @@ typedef struct {
 #define RCREG_ERR        0x8000	/* accept damaged and collided pkts */
 #define RCREG_RNT        0x4000	/* accept packets that are < 64     */
 #define RCREG_BRD        0x2000	/* accept broadcasts                */
-#define RCREG_PRO        0x1000	/* promiscous mode                  */
+#define RCREG_PRO        0x1000	/* promiscuous mode                  */
 #define RCREG_AMC        0x0800	/* accept all multicasts            */
 #define RCREG_LB_NONE    0x0000	/* no loopback                      */
 #define RCREG_LB_MAC     0x0200	/* MAC loopback                     */
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 5522d459654..b388d782c7c 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -710,7 +710,7 @@ static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 				SUPPORTED_FIBRE);
 	cmd->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg |
 				ADVERTISED_FIBRE);
-	cmd->speed = SPEED_1000;
+	ethtool_cmd_speed_set(cmd, SPEED_1000);
 	cmd->duplex = DUPLEX_FULL;
 	cmd->port = PORT_FIBRE;
 	cmd->phy_address = 0;
@@ -729,45 +729,24 @@ static void netdev_get_drvinfo(struct net_device *dev,
 		sizeof(info->version) - 1);
 }
 
-static void ibmveth_set_rx_csum_flags(struct net_device *dev, u32 data)
+static u32 ibmveth_fix_features(struct net_device *dev, u32 features)
 {
-	struct ibmveth_adapter *adapter = netdev_priv(dev);
-
-	if (data) {
-		adapter->rx_csum = 1;
-	} else {
-		/*
-		 * Since the ibmveth firmware interface does not have the
-		 * concept of separate tx/rx checksum offload enable, if rx
-		 * checksum is disabled we also have to disable tx checksum
-		 * offload. Once we disable rx checksum offload, we are no
-		 * longer allowed to send tx buffers that are not properly
-		 * checksummed.
-		 */
-		adapter->rx_csum = 0;
-		dev->features &= ~NETIF_F_IP_CSUM;
-		dev->features &= ~NETIF_F_IPV6_CSUM;
-	}
-}
+	/*
+	 * Since the ibmveth firmware interface does not have the
+	 * concept of separate tx/rx checksum offload enable, if rx
+	 * checksum is disabled we also have to disable tx checksum
+	 * offload. Once we disable rx checksum offload, we are no
+	 * longer allowed to send tx buffers that are not properly
+	 * checksummed.
+	 */
 
-static void ibmveth_set_tx_csum_flags(struct net_device *dev, u32 data)
-{
-	struct ibmveth_adapter *adapter = netdev_priv(dev);
+	if (!(features & NETIF_F_RXCSUM))
+		features &= ~NETIF_F_ALL_CSUM;
 
-	if (data) {
-		if (adapter->fw_ipv4_csum_support)
-			dev->features |= NETIF_F_IP_CSUM;
-		if (adapter->fw_ipv6_csum_support)
-			dev->features |= NETIF_F_IPV6_CSUM;
-		adapter->rx_csum = 1;
-	} else {
-		dev->features &= ~NETIF_F_IP_CSUM;
-		dev->features &= ~NETIF_F_IPV6_CSUM;
-	}
+	return features;
 }
 
-static int ibmveth_set_csum_offload(struct net_device *dev, u32 data,
-				    void (*done) (struct net_device *, u32))
+static int ibmveth_set_csum_offload(struct net_device *dev, u32 data)
 {
 	struct ibmveth_adapter *adapter = netdev_priv(dev);
 	unsigned long set_attr, clr_attr, ret_attr;
@@ -827,8 +806,8 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data,
 		} else
 			adapter->fw_ipv6_csum_support = data;
 
-		if (ret == H_SUCCESS || ret6 == H_SUCCESS)
-			done(dev, data);
+		if (ret != H_SUCCESS || ret6 != H_SUCCESS)
+			adapter->rx_csum = data;
 		else
 			rc1 = -EIO;
 	} else {
@@ -844,41 +823,22 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data,
 	return rc1 ? rc1 : rc2;
 }
 
-static int ibmveth_set_rx_csum(struct net_device *dev, u32 data)
+static int ibmveth_set_features(struct net_device *dev, u32 features)
 {
 	struct ibmveth_adapter *adapter = netdev_priv(dev);
+	int rx_csum = !!(features & NETIF_F_RXCSUM);
+	int rc;
 
-	if ((data && adapter->rx_csum) || (!data && !adapter->rx_csum))
-		return 0;
-
-	return ibmveth_set_csum_offload(dev, data, ibmveth_set_rx_csum_flags);
-}
-
-static int ibmveth_set_tx_csum(struct net_device *dev, u32 data)
-{
-	struct ibmveth_adapter *adapter = netdev_priv(dev);
-	int rc = 0;
-
-	if (data && (dev->features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)))
-		return 0;
-	if (!data && !(dev->features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)))
+	if (rx_csum == adapter->rx_csum)
 		return 0;
 
-	if (data && !adapter->rx_csum)
-		rc = ibmveth_set_csum_offload(dev, data,
-					      ibmveth_set_tx_csum_flags);
-	else
-		ibmveth_set_tx_csum_flags(dev, data);
+	rc = ibmveth_set_csum_offload(dev, rx_csum);
+	if (rc && !adapter->rx_csum)
+		dev->features = features & ~(NETIF_F_ALL_CSUM | NETIF_F_RXCSUM);
 
 	return rc;
 }
 
-static u32 ibmveth_get_rx_csum(struct net_device *dev)
-{
-	struct ibmveth_adapter *adapter = netdev_priv(dev);
-	return adapter->rx_csum;
-}
-
 static void ibmveth_get_strings(struct net_device *dev, u32 stringset, u8 *data)
 {
 	int i;
@@ -914,13 +874,9 @@ static const struct ethtool_ops netdev_ethtool_ops = {
 	.get_drvinfo		= netdev_get_drvinfo,
 	.get_settings		= netdev_get_settings,
 	.get_link		= ethtool_op_get_link,
-	.set_tx_csum		= ibmveth_set_tx_csum,
-	.get_rx_csum		= ibmveth_get_rx_csum,
-	.set_rx_csum		= ibmveth_set_rx_csum,
 	.get_strings		= ibmveth_get_strings,
 	.get_sset_count		= ibmveth_get_sset_count,
 	.get_ethtool_stats	= ibmveth_get_ethtool_stats,
-	.set_sg			= ethtool_op_set_sg,
 };
 
 static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
@@ -1345,6 +1301,8 @@ static const struct net_device_ops ibmveth_netdev_ops = {
 	.ndo_set_multicast_list	= ibmveth_set_multicast_list,
 	.ndo_do_ioctl		= ibmveth_ioctl,
 	.ndo_change_mtu		= ibmveth_change_mtu,
+	.ndo_fix_features	= ibmveth_fix_features,
+	.ndo_set_features	= ibmveth_set_features,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1412,7 +1370,9 @@ static int __devinit ibmveth_probe(struct vio_dev *dev,
 	netdev->netdev_ops = &ibmveth_netdev_ops;
 	netdev->ethtool_ops = &netdev_ethtool_ops;
 	SET_NETDEV_DEV(netdev, &dev->dev);
-	netdev->features |= NETIF_F_SG;
+	netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	netdev->features |= netdev->hw_features;
 
 	memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
 
@@ -1437,7 +1397,7 @@ static int __devinit ibmveth_probe(struct vio_dev *dev,
 
 	netdev_dbg(netdev, "registering netdev...\n");
 
-	ibmveth_set_csum_offload(netdev, 1, ibmveth_set_tx_csum_flags);
+	ibmveth_set_features(netdev, netdev->features);
 
 	rc = register_netdev(netdev);
 
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index e07d487f015..4fecaed67fc 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -233,10 +233,6 @@ static int __init ifb_init_one(int index)
 	if (!dev_ifb)
 		return -ENOMEM;
 
-	err = dev_alloc_name(dev_ifb, dev_ifb->name);
-	if (err < 0)
-		goto err;
-
 	dev_ifb->rtnl_link_ops = &ifb_link_ops;
 	err = register_netdevice(dev_ifb);
 	if (err < 0)
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 6b256c275e1..0f563c8c5ff 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -244,6 +244,14 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 	 */
 	size += NVM_WORD_SIZE_BASE_SHIFT;
 
+	/*
+	 * Check for invalid size
+	 */
+	if ((hw->mac.type == e1000_82576) && (size > 15)) {
+		printk("igb: The NVM size is not valid, "
+			"defaulting to 32K.\n");
+		size = 15;
+	}
 	nvm->word_size = 1 << size;
 	if (nvm->word_size == (1 << 15))
 		nvm->page_size = 128;
@@ -1877,7 +1885,7 @@ static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw)
 	}
 
 	if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
-		/* if chekcsums compatibility bit is set validate checksums
+		/* if checksums compatibility bit is set validate checksums
 		 * for all 4 ports. */
 		eeprom_regions_count = 4;
 	}
@@ -1988,6 +1996,7 @@ static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw)
 out:
 	return ret_val;
 }
+
 /**
  *  igb_set_eee_i350 - Enable/disable EEE support
  *  @hw: pointer to the HW structure
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 90c5e01e923..ce8255fc3c5 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -181,7 +181,7 @@ s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
  *  address and must override the actual permanent MAC address.  If an
  *  alternate MAC address is fopund it is saved in the hw struct and
  *  prgrammed into RAR0 and the cuntion returns success, otherwise the
- *  fucntion returns an error.
+ *  function returns an error.
  **/
 s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
 {
@@ -982,7 +982,7 @@ out:
 }
 
 /**
- *  igb_get_speed_and_duplex_copper - Retreive current speed/duplex
+ *  igb_get_speed_and_duplex_copper - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
  *  @speed: stores the current speed
  *  @duplex: stores the current duplex
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index 6694bf3e5ad..d639706eb3f 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -1421,7 +1421,7 @@ out:
 }
 
 /**
- *  igb_check_downshift - Checks whether a downshift in speed occured
+ *  igb_check_downshift - Checks whether a downshift in speed occurred
  *  @hw: pointer to the HW structure
  *
  *  Success returns 0, Failure returns 1
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 1c687e298d5..f4fa4b1751c 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -360,7 +360,7 @@ extern int igb_up(struct igb_adapter *);
 extern void igb_down(struct igb_adapter *);
 extern void igb_reinit_locked(struct igb_adapter *);
 extern void igb_reset(struct igb_adapter *);
-extern int igb_set_spd_dplx(struct igb_adapter *, u16);
+extern int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
 extern int igb_setup_tx_resources(struct igb_ring *);
 extern int igb_setup_rx_resources(struct igb_ring *);
 extern void igb_free_tx_resources(struct igb_ring *);
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index d976733bbcc..fdc895e5a3f 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -178,11 +178,11 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 
 		if ((status & E1000_STATUS_SPEED_1000) ||
 		    hw->phy.media_type != e1000_media_type_copper)
-			ecmd->speed = SPEED_1000;
+			ethtool_cmd_speed_set(ecmd, SPEED_1000);
 		else if (status & E1000_STATUS_SPEED_100)
-			ecmd->speed = SPEED_100;
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
 		else
-			ecmd->speed = SPEED_10;
+			ethtool_cmd_speed_set(ecmd, SPEED_10);
 
 		if ((status & E1000_STATUS_FD) ||
 		    hw->phy.media_type != e1000_media_type_copper)
@@ -190,7 +190,7 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 		else
 			ecmd->duplex = DUPLEX_HALF;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -223,7 +223,8 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 		if (adapter->fc_autoneg)
 			hw->fc.requested_mode = e1000_fc_default;
 	} else {
-		if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+		u32 speed = ethtool_cmd_speed(ecmd);
+		if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
 			clear_bit(__IGB_RESETTING, &adapter->state);
 			return -EINVAL;
 		}
@@ -1963,27 +1964,28 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 /* bit defines for adapter->led_status */
 #define IGB_LED_ON		0
 
-static int igb_phys_id(struct net_device *netdev, u32 data)
+static int igb_set_phys_id(struct net_device *netdev,
+			   enum ethtool_phys_id_state state)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	unsigned long timeout;
 
-	timeout = data * 1000;
-
-	/*
-	 *  msleep_interruptable only accepts unsigned int so we are limited
-	 * in how long a duration we can wait
-	 */
-	if (!timeout || timeout > UINT_MAX)
-		timeout = UINT_MAX;
-
-	igb_blink_led(hw);
-	msleep_interruptible(timeout);
-
-	igb_led_off(hw);
-	clear_bit(IGB_LED_ON, &adapter->led_status);
-	igb_cleanup_led(hw);
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		igb_blink_led(hw);
+		return 2;
+	case ETHTOOL_ID_ON:
+		igb_blink_led(hw);
+		break;
+	case ETHTOOL_ID_OFF:
+		igb_led_off(hw);
+		break;
+	case ETHTOOL_ID_INACTIVE:
+		igb_led_off(hw);
+		clear_bit(IGB_LED_ON, &adapter->led_status);
+		igb_cleanup_led(hw);
+		break;
+	}
 
 	return 0;
 }
@@ -2215,7 +2217,7 @@ static const struct ethtool_ops igb_ethtool_ops = {
 	.set_tso                = igb_set_tso,
 	.self_test              = igb_diag_test,
 	.get_strings            = igb_get_strings,
-	.phys_id                = igb_phys_id,
+	.set_phys_id            = igb_set_phys_id,
 	.get_sset_count         = igb_get_sset_count,
 	.get_ethtool_stats      = igb_get_ethtool_stats,
 	.get_coalesce           = igb_get_coalesce,
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3d850af0cdd..ce7838e5582 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -200,7 +200,7 @@ static struct pci_driver igb_driver = {
 	.probe    = igb_probe,
 	.remove   = __devexit_p(igb_remove),
 #ifdef CONFIG_PM
-	/* Power Managment Hooks */
+	/* Power Management Hooks */
 	.suspend  = igb_suspend,
 	.resume   = igb_resume,
 #endif
@@ -2292,7 +2292,7 @@ static void igb_init_hw_timer(struct igb_adapter *adapter)
 		/**
 		 * Scale the NIC clock cycle by a large factor so that
 		 * relatively small clock corrections can be added or
-		 * substracted at each clock tick. The drawbacks of a large
+		 * subtracted at each clock tick. The drawbacks of a large
 		 * factor are a) that the clock register overflows more quickly
 		 * (not such a big deal) and b) that the increment per tick has
 		 * to fit into 24 bits.  As a result we need to use a shift of
@@ -3409,7 +3409,7 @@ static void igb_set_rx_mode(struct net_device *netdev)
 		} else {
 			/*
 			 * Write addresses to the MTA, if the attempt fails
-			 * then we should just turn on promiscous mode so
+			 * then we should just turn on promiscuous mode so
 			 * that we can at least receive multicast traffic
 			 */
 			count = igb_write_mc_addr_list(netdev);
@@ -3423,7 +3423,7 @@ static void igb_set_rx_mode(struct net_device *netdev)
 		/*
 		 * Write addresses to available RAR registers, if there is not
 		 * sufficient space to store all the addresses then enable
-		 * unicast promiscous mode
+		 * unicast promiscuous mode
 		 */
 		count = igb_write_uc_addr_list(netdev);
 		if (count < 0) {
@@ -3532,6 +3532,25 @@ bool igb_has_link(struct igb_adapter *adapter)
 	return link_active;
 }
 
+static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
+{
+	bool ret = false;
+	u32 ctrl_ext, thstat;
+
+	/* check for thermal sensor event on i350, copper only */
+	if (hw->mac.type == e1000_i350) {
+		thstat = rd32(E1000_THSTAT);
+		ctrl_ext = rd32(E1000_CTRL_EXT);
+
+		if ((hw->phy.media_type == e1000_media_type_copper) &&
+		    !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+			ret = !!(thstat & event);
+		}
+	}
+
+	return ret;
+}
+
 /**
  * igb_watchdog - Timer Call-back
  * @data: pointer to adapter cast into an unsigned long
@@ -3550,7 +3569,7 @@ static void igb_watchdog_task(struct work_struct *work)
                                                    watchdog_task);
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
-	u32 link, ctrl_ext, thstat;
+	u32 link;
 	int i;
 
 	link = igb_has_link(adapter);
@@ -3574,25 +3593,14 @@ static void igb_watchdog_task(struct work_struct *work)
 			       ((ctrl & E1000_CTRL_RFCE) ?  "RX" :
 			       ((ctrl & E1000_CTRL_TFCE) ?  "TX" : "None")));
 
-			/* check for thermal sensor event on i350,
-			 * copper only */
-			if (hw->mac.type == e1000_i350) {
-				thstat = rd32(E1000_THSTAT);
-				ctrl_ext = rd32(E1000_CTRL_EXT);
-				if ((hw->phy.media_type ==
-				     e1000_media_type_copper) && !(ctrl_ext &
-				     E1000_CTRL_EXT_LINK_MODE_SGMII)) {
-					if (thstat &
-					    E1000_THSTAT_LINK_THROTTLE) {
-						printk(KERN_INFO "igb: %s The "
-						       "network adapter link "
-						       "speed was downshifted "
-						       "because it "
-						       "overheated.\n",
-						       netdev->name);
-					}
-				}
+			/* check for thermal sensor event */
+			if (igb_thermal_sensor_event(hw, E1000_THSTAT_LINK_THROTTLE)) {
+				printk(KERN_INFO "igb: %s The network adapter "
+						 "link speed was downshifted "
+						 "because it overheated.\n",
+						 netdev->name);
 			}
+
 			/* adjust timeout factor according to speed/duplex */
 			adapter->tx_timeout_factor = 1;
 			switch (adapter->link_speed) {
@@ -3618,22 +3626,15 @@ static void igb_watchdog_task(struct work_struct *work)
 		if (netif_carrier_ok(netdev)) {
 			adapter->link_speed = 0;
 			adapter->link_duplex = 0;
-			/* check for thermal sensor event on i350
-			 * copper only*/
-			if (hw->mac.type == e1000_i350) {
-				thstat = rd32(E1000_THSTAT);
-				ctrl_ext = rd32(E1000_CTRL_EXT);
-				if ((hw->phy.media_type ==
-				     e1000_media_type_copper) && !(ctrl_ext &
-				     E1000_CTRL_EXT_LINK_MODE_SGMII)) {
-					if (thstat & E1000_THSTAT_PWR_DOWN) {
-						printk(KERN_ERR "igb: %s The "
-						"network adapter was stopped "
-						"because it overheated.\n",
+
+			/* check for thermal sensor event */
+			if (igb_thermal_sensor_event(hw, E1000_THSTAT_PWR_DOWN)) {
+				printk(KERN_ERR "igb: %s The network adapter "
+						"was stopped because it "
+						"overheated.\n",
 						netdev->name);
-					}
-				}
 			}
+
 			/* Links status message must follow this format */
 			printk(KERN_INFO "igb: %s NIC Link is Down\n",
 			       netdev->name);
@@ -4317,7 +4318,7 @@ netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
 
 	/*
 	 * count reflects descriptors mapped, if 0 or less then mapping error
-	 * has occured and we need to rewind the descriptor queue
+	 * has occurred and we need to rewind the descriptor queue
 	 */
 	count = igb_tx_map_adv(tx_ring, skb, first);
 	if (!count) {
@@ -5352,8 +5353,8 @@ static void igb_msg_task(struct igb_adapter *adapter)
  *  The unicast table address is a register array of 32-bit registers.
  *  The table is meant to be used in a way similar to how the MTA is used
  *  however due to certain limitations in the hardware it is necessary to
- *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous
- *  enable bit to allow vlan tag stripping when promiscous mode is enabled
+ *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ *  enable bit to allow vlan tag stripping when promiscuous mode is enabled
  **/
 static void igb_set_uta(struct igb_adapter *adapter)
 {
@@ -6348,21 +6349,25 @@ static void igb_restore_vlan(struct igb_adapter *adapter)
 	}
 }
 
-int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
+int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
 {
 	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
 
 	mac->autoneg = 0;
 
+	/* Make sure dplx is at most 1 bit and lsb of speed is not set
+	 * for the switch() below to work */
+	if ((spd & 1) || (dplx & ~1))
+		goto err_inval;
+
 	/* Fiber NIC's only allow 1000 Gbps Full duplex */
 	if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
-		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
-		dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
-		return -EINVAL;
-	}
+	    spd != SPEED_1000 &&
+	    dplx != DUPLEX_FULL)
+		goto err_inval;
 
-	switch (spddplx) {
+	switch (spd + dplx) {
 	case SPEED_10 + DUPLEX_HALF:
 		mac->forced_speed_duplex = ADVERTISE_10_HALF;
 		break;
@@ -6381,10 +6386,13 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
-		dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
-		return -EINVAL;
+		goto err_inval;
 	}
 	return 0;
+
+err_inval:
+	dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
+	return -EINVAL;
 }
 
 static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c
index 1d943aa7c7a..b0b14d63dfb 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/igbvf/ethtool.c
@@ -90,18 +90,18 @@ static int igbvf_get_settings(struct net_device *netdev,
 	status = er32(STATUS);
 	if (status & E1000_STATUS_LU) {
 		if (status & E1000_STATUS_SPEED_1000)
-			ecmd->speed = 1000;
+			ethtool_cmd_speed_set(ecmd, SPEED_1000);
 		else if (status & E1000_STATUS_SPEED_100)
-			ecmd->speed = 100;
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
 		else
-			ecmd->speed = 10;
+			ethtool_cmd_speed_set(ecmd, SPEED_10);
 
 		if (status & E1000_STATUS_FD)
 			ecmd->duplex = DUPLEX_FULL;
 		else
 			ecmd->duplex = DUPLEX_HALF;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -391,11 +391,6 @@ static int igbvf_set_wol(struct net_device *netdev,
 	return -EOPNOTSUPP;
 }
 
-static int igbvf_phys_id(struct net_device *netdev, u32 data)
-{
-	return 0;
-}
-
 static int igbvf_get_coalesce(struct net_device *netdev,
                               struct ethtool_coalesce *ec)
 {
@@ -527,7 +522,6 @@ static const struct ethtool_ops igbvf_ethtool_ops = {
 	.self_test		= igbvf_diag_test,
 	.get_sset_count		= igbvf_get_sset_count,
 	.get_strings		= igbvf_get_strings,
-	.phys_id		= igbvf_phys_id,
 	.get_ethtool_stats	= igbvf_get_ethtool_stats,
 	.get_coalesce		= igbvf_get_coalesce,
 	.set_coalesce		= igbvf_set_coalesce,
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 6ccc32fd733..1d04ca6fdae 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -2227,7 +2227,7 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
 
 	/*
 	 * count reflects descriptors mapped, if 0 then mapping error
-	 * has occured and we need to rewind the descriptor queue
+	 * has occurred and we need to rewind the descriptor queue
 	 */
 	count = igbvf_tx_map_adv(adapter, tx_ring, skb, first);
 
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index c8ee8d28767..96c95617195 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -90,8 +90,6 @@ struct ioc3_private {
 	u32 emcr, ehar_h, ehar_l;
 	spinlock_t ioc3_lock;
 	struct mii_if_info mii;
-	unsigned long flags;
-#define IOC3_FLAG_RX_CHECKSUMS	1
 
 	struct pci_dev *pdev;
 
@@ -609,7 +607,7 @@ static inline void ioc3_rx(struct net_device *dev)
 				goto next;
 			}
 
-			if (likely(ip->flags & IOC3_FLAG_RX_CHECKSUMS))
+			if (likely(dev->features & NETIF_F_RXCSUM))
 				ioc3_tcpudp_checksum(skb,
 					w0 & ERXBUF_IPCKSUM_MASK, len);
 
@@ -1328,6 +1326,7 @@ static int __devinit ioc3_probe(struct pci_dev *pdev,
 	dev->watchdog_timeo	= 5 * HZ;
 	dev->netdev_ops		= &ioc3_netdev_ops;
 	dev->ethtool_ops	= &ioc3_ethtool_ops;
+	dev->hw_features	= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
 	dev->features		= NETIF_F_IP_CSUM;
 
 	sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
@@ -1618,37 +1617,12 @@ static u32 ioc3_get_link(struct net_device *dev)
 	return rc;
 }
 
-static u32 ioc3_get_rx_csum(struct net_device *dev)
-{
-	struct ioc3_private *ip = netdev_priv(dev);
-
-	return ip->flags & IOC3_FLAG_RX_CHECKSUMS;
-}
-
-static int ioc3_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct ioc3_private *ip = netdev_priv(dev);
-
-	spin_lock_bh(&ip->ioc3_lock);
-	if (data)
-		ip->flags |= IOC3_FLAG_RX_CHECKSUMS;
-	else
-		ip->flags &= ~IOC3_FLAG_RX_CHECKSUMS;
-	spin_unlock_bh(&ip->ioc3_lock);
-
-	return 0;
-}
-
 static const struct ethtool_ops ioc3_ethtool_ops = {
 	.get_drvinfo		= ioc3_get_drvinfo,
 	.get_settings		= ioc3_get_settings,
 	.set_settings		= ioc3_set_settings,
 	.nway_reset		= ioc3_nway_reset,
 	.get_link		= ioc3_get_link,
-	.get_rx_csum		= ioc3_get_rx_csum,
-	.set_rx_csum		= ioc3_set_rx_csum,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_csum
 };
 
 static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index a5b0f0e194b..58cd3202b48 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -486,14 +486,14 @@ static int ipg_config_autoneg(struct net_device *dev)
 	phyctrl = ipg_r8(PHY_CTRL);
 	mac_ctrl_val = ipg_r32(MAC_CTRL);
 
-	/* Set flags for use in resolving auto-negotation, assuming
+	/* Set flags for use in resolving auto-negotiation, assuming
 	 * non-1000Mbps, half duplex, no flow control.
 	 */
 	fullduplex = 0;
 	txflowcontrol = 0;
 	rxflowcontrol = 0;
 
-	/* To accomodate a problem in 10Mbps operation,
+	/* To accommodate a problem in 10Mbps operation,
 	 * set a global flag if PHY running in 10Mbps mode.
 	 */
 	sp->tenmbpsmode = 0;
@@ -846,7 +846,7 @@ static void init_tfdlist(struct net_device *dev)
 }
 
 /*
- * Free all transmit buffers which have already been transfered
+ * Free all transmit buffers which have already been transferred
  * via DMA to the IPG.
  */
 static void ipg_nic_txfree(struct net_device *dev)
@@ -920,7 +920,7 @@ static void ipg_tx_timeout(struct net_device *dev)
 
 /*
  * For TxComplete interrupts, free all transmit
- * buffers which have already been transfered via DMA
+ * buffers which have already been transferred via DMA
  * to the IPG.
  */
 static void ipg_nic_txcleanup(struct net_device *dev)
@@ -1141,13 +1141,13 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
 
 		/* Increment detailed receive error statistics. */
 		if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
-			IPG_DEBUG_MSG("RX FIFO overrun occured.\n");
+			IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");
 
 			sp->stats.rx_fifo_errors++;
 		}
 
 		if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
-			IPG_DEBUG_MSG("RX runt occured.\n");
+			IPG_DEBUG_MSG("RX runt occurred.\n");
 			sp->stats.rx_length_errors++;
 		}
 
@@ -1156,7 +1156,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
 		 */
 
 		if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
-			IPG_DEBUG_MSG("RX alignment error occured.\n");
+			IPG_DEBUG_MSG("RX alignment error occurred.\n");
 			sp->stats.rx_frame_errors++;
 		}
 
@@ -1421,12 +1421,12 @@ static int ipg_nic_rx(struct net_device *dev)
 
 			/* Increment detailed receive error statistics. */
 			if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
-				IPG_DEBUG_MSG("RX FIFO overrun occured.\n");
+				IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");
 				sp->stats.rx_fifo_errors++;
 			}
 
 			if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
-				IPG_DEBUG_MSG("RX runt occured.\n");
+				IPG_DEBUG_MSG("RX runt occurred.\n");
 				sp->stats.rx_length_errors++;
 			}
 
@@ -1436,7 +1436,7 @@ static int ipg_nic_rx(struct net_device *dev)
 			 */
 
 			if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
-				IPG_DEBUG_MSG("RX alignment error occured.\n");
+				IPG_DEBUG_MSG("RX alignment error occurred.\n");
 				sp->stats.rx_frame_errors++;
 			}
 
@@ -1460,7 +1460,7 @@ static int ipg_nic_rx(struct net_device *dev)
 			}
 		} else {
 
-			/* Adjust the new buffer length to accomodate the size
+			/* Adjust the new buffer length to accommodate the size
 			 * of the received frame.
 			 */
 			skb_put(skb, framelen);
@@ -1488,7 +1488,7 @@ static int ipg_nic_rx(struct net_device *dev)
 	}
 
 	/*
-	 * If there are more RFDs to proces and the allocated amount of RFD
+	 * If there are more RFDs to process and the allocated amount of RFD
 	 * processing time has expired, assert Interrupt Requested to make
 	 * sure we come back to process the remaining RFDs.
 	 */
@@ -1886,7 +1886,7 @@ static netdev_tx_t ipg_nic_hard_start_xmit(struct sk_buff *skb,
 	/* Request TxComplete interrupts at an interval defined
 	 * by the constant IPG_FRAMESBETWEENTXCOMPLETES.
 	 * Request TxComplete interrupt for every frame
-	 * if in 10Mbps mode to accomodate problem with 10Mbps
+	 * if in 10Mbps mode to accommodate problem with 10Mbps
 	 * processing.
 	 */
 	if (sp->tenmbpsmode)
@@ -2098,7 +2098,7 @@ static int ipg_nic_change_mtu(struct net_device *dev, int new_mtu)
 	struct ipg_nic_private *sp = netdev_priv(dev);
 	int err;
 
-	/* Function to accomodate changes to Maximum Transfer Unit
+	/* Function to accommodate changes to Maximum Transfer Unit
 	 * (or MTU) of IPG NIC. Cannot use default function since
 	 * the default will not allow for MTU > 1500 bytes.
 	 */
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 92631eb6f6a..872183f29ec 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -76,7 +76,7 @@ static int  ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
 static int  ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
 static int  ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
 
-/* These are the currently known ALi sourth-bridge chipsets, the only one difference
+/* These are the currently known ALi south-bridge chipsets, the only one difference
  * is that M1543C doesn't support HP HDSL-3600
  */
 static ali_chip_t chips[] =
@@ -1108,7 +1108,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
 	outb(lcr,		  iobase+UART_LCR); /* Set 8N1	*/
 	outb(fcr,		  iobase+UART_FCR); /* Enable FIFO's */
 
-	/* without this, the conection will be broken after come back from FIR speed,
+	/* without this, the connection will be broken after come back from FIR speed,
 	   but with this, the SIR connection is harder to established */
 	outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
 	
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index f81d944fc36..174cafad2c1 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -56,7 +56,7 @@
 /* do_probe module parameter Enable this code */
 /* Probe code is very useful for understanding how the hardware works */
 /* Use it with various combinations of TT_LEN, RX_LEN */
-/* Strongly recomended, disable if the probe fails on your machine */
+/* Strongly recommended, disable if the probe fails on your machine */
 /* and send me <james@fishsoup.dhs.org> the output of dmesg */
 #define USE_PROBE 1
 #undef  USE_PROBE
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 77fcf445916..d92d54e839b 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -51,7 +51,7 @@
 
 /* The documentation for this chip is allegedly released         */
 /* However I have not seen it, not have I managed to contact     */
-/* anyone who has. HOWEVER the chip bears a striking resemblence */
+/* anyone who has. HOWEVER the chip bears a striking resemblance */
 /* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
 /* the documentation for this is freely available at             */
 /* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index a31b8fa8aaa..96cdecff349 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -38,7 +38,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed);
 /* Control register 1 */
 #define GIRBIL_TXEN    0x01 /* Enable transmitter */
 #define GIRBIL_RXEN    0x02 /* Enable receiver */
-#define GIRBIL_ECAN    0x04 /* Cancel self emmited data */
+#define GIRBIL_ECAN    0x04 /* Cancel self emitted data */
 #define GIRBIL_ECHO    0x08 /* Echo control characters */
 
 /* LED Current Register (0x2) */
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e4ea61944c2..d9267cb98a2 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -370,7 +370,7 @@ static void speed_bulk_callback(struct urb *urb)
 	/* urb is now available */
 	//urb->status = 0; -> tested above
 
-	/* New speed and xbof is now commited in hardware */
+	/* New speed and xbof is now committed in hardware */
 	self->new_speed = -1;
 	self->new_xbofs = -1;
 
@@ -602,7 +602,7 @@ static void write_bulk_callback(struct urb *urb)
 			IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
 			irda_usb_change_speed_xbofs(self);
 		} else {
-			/* New speed and xbof is now commited in hardware */
+			/* New speed and xbof is now committed in hardware */
 			self->new_speed = -1;
 			self->new_xbofs = -1;
 			/* Done, waiting for next packet */
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index cc821de2c96..be52bfed66a 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)
 
 	mcs_get_reg(mcs, MCS_MODE_REG, &rval);
 
-	/* MINRXPW values recomended by MosChip */
+	/* MINRXPW values recommended by MosChip */
 	if (mcs->new_speed <= 115200) {
 		rval &= ~MCS_FIR;
 
@@ -799,7 +799,7 @@ static void mcs_receive_irq(struct urb *urb)
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
 }
 
-/* Transmit callback funtion.  */
+/* Transmit callback function.  */
 static void mcs_send_irq(struct urb *urb)
 {
 	struct mcs_cb *mcs = urb->context;
@@ -811,7 +811,7 @@ static void mcs_send_irq(struct urb *urb)
 		netif_wake_queue(ndev);
 }
 
-/* Transmit callback funtion.  */
+/* Transmit callback function.  */
 static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb,
 				       struct net_device *ndev)
 {
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 559fe854d76..7a963d4e6d0 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -716,7 +716,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
 	int reg, com = 0;
 	int pnp;
 
-	/* Read funtion enable register (FER) */
+	/* Read function enable register (FER) */
 	outb(CFG_338_FER, cfg_base);
 	reg = inb(cfg_base+1);
 
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 7ba7738759b..32fa58211fa 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -135,7 +135,7 @@
 #define LSR_TXRDY       0x20 /* Transmitter ready */
 #define LSR_TXEMP       0x40 /* Transmitter empty */
 
-#define ASCR            0x07 /* Auxillary Status and Control Register */
+#define ASCR            0x07 /* Auxiliary Status and Control Register */
 #define ASCR_RXF_TOUT   0x01 /* Rx FIFO timeout */
 #define ASCR_FEND_INF   0x02 /* Frame end bytes in rx FIFO */
 #define ASCR_S_EOT      0x04 /* Set end of transmission */
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index c192c31e4c5..001ed0a255f 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -40,7 +40,7 @@
 
 #define ICCR0_AME	(1 << 7)	/* Address match enable */
 #define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
-#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
+#define ICCR0_RIE	(1 << 5)	/* Receive FIFO interrupt enable */
 #define ICCR0_RXE	(1 << 4)	/* Receive enable */
 #define ICCR0_TXE	(1 << 3)	/* Transmit enable */
 #define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
@@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id)
 	}
 
 	if (icsr0 & ICSR0_EIF) {
-		/* An error in FIFO occured, or there is a end of frame */
+		/* An error in FIFO occurred, or there is a end of frame */
 		pxa_irda_fir_irq_eif(si, dev, icsr0);
 	}
 
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1c1677cfea2..69b5707db36 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -222,19 +222,19 @@ static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 s
 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
 
 /* Probing */
-static int __init smsc_ircc_look_for_chips(void);
-static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
-static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
-static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
-static int __init smsc_superio_fdc(unsigned short cfg_base);
-static int __init smsc_superio_lpc(unsigned short cfg_base);
+static int smsc_ircc_look_for_chips(void);
+static const struct smsc_chip * smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
+static int smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
+static int smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
+static int smsc_superio_fdc(unsigned short cfg_base);
+static int smsc_superio_lpc(unsigned short cfg_base);
 #ifdef CONFIG_PCI
-static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
-static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
-static void __init preconfigure_ali_port(struct pci_dev *dev,
+static int preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
+static int preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static void preconfigure_ali_port(struct pci_dev *dev,
 					 unsigned short port);
-static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
-static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
+static int preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static int smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 						    unsigned short ircc_fir,
 						    unsigned short ircc_sir,
 						    unsigned char ircc_dma,
@@ -366,7 +366,7 @@ static inline void register_bank(int iobase, int bank)
 }
 
 /* PNP hotplug support */
-static const struct pnp_device_id smsc_ircc_pnp_table[] = {
+static const struct pnp_device_id smsc_ircc_pnp_table[] __devinitconst = {
 	{ .id = "SMCf010", .driver_data = 0 },
 	/* and presumably others */
 	{ }
@@ -515,7 +515,7 @@ static const struct net_device_ops smsc_ircc_netdev_ops = {
  *    Try to open driver instance
  *
  */
-static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
+static int __devinit smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
 {
 	struct smsc_ircc_cb *self;
 	struct net_device *dev;
@@ -1582,7 +1582,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
 	int iobase;
 	int iir, lsr;
 
-	/* Already locked comming here in smsc_ircc_interrupt() */
+	/* Already locked coming here in smsc_ircc_interrupt() */
 	/*spin_lock(&self->lock);*/
 
 	iobase = self->io.sir_base;
@@ -2273,7 +2273,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho
 }
 
 
-static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
+static int __devinit smsc_access(unsigned short cfg_base, unsigned char reg)
 {
 	IRDA_DEBUG(1, "%s\n", __func__);
 
@@ -2281,7 +2281,7 @@ static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
 	return inb(cfg_base) != reg ? -1 : 0;
 }
 
-static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
+static const struct smsc_chip * __devinit smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
 {
 	u8 devid, xdevid, rev;
 
@@ -2406,7 +2406,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
 #ifdef CONFIG_PCI
 #define PCIID_VENDOR_INTEL 0x8086
 #define PCIID_VENDOR_ALI 0x10b9
-static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
+static const struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitconst = {
 	/*
 	 * Subsystems needing entries:
 	 * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family
@@ -2532,7 +2532,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
  * (FIR port, SIR port, FIR DMA, FIR IRQ)
  * through the chip configuration port.
  */
-static int __init preconfigure_smsc_chip(struct
+static int __devinit preconfigure_smsc_chip(struct
 					 smsc_ircc_subsystem_configuration
 					 *conf)
 {
@@ -2633,7 +2633,7 @@ static int __init preconfigure_smsc_chip(struct
  * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
  * They all work the same way!
  */
-static int __init preconfigure_through_82801(struct pci_dev *dev,
+static int __devinit preconfigure_through_82801(struct pci_dev *dev,
 					     struct
 					     smsc_ircc_subsystem_configuration
 					     *conf)
@@ -2786,7 +2786,7 @@ static int __init preconfigure_through_82801(struct pci_dev *dev,
  * This is based on reverse-engineering since ALi does not
  * provide any data sheet for the 1533 chip.
  */
-static void __init preconfigure_ali_port(struct pci_dev *dev,
+static void __devinit preconfigure_ali_port(struct pci_dev *dev,
 					 unsigned short port)
 {
 	unsigned char reg;
@@ -2824,7 +2824,7 @@ static void __init preconfigure_ali_port(struct pci_dev *dev,
 	IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
 }
 
-static int __init preconfigure_through_ali(struct pci_dev *dev,
+static int __devinit preconfigure_through_ali(struct pci_dev *dev,
 					   struct
 					   smsc_ircc_subsystem_configuration
 					   *conf)
@@ -2837,7 +2837,7 @@ static int __init preconfigure_through_ali(struct pci_dev *dev,
 	return preconfigure_smsc_chip(conf);
 }
 
-static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
+static int __devinit smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 						    unsigned short ircc_fir,
 						    unsigned short ircc_sir,
 						    unsigned char ircc_dma,
@@ -2849,7 +2849,7 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 	int ret = 0;
 
 	for_each_pci_dev(dev) {
-		struct smsc_ircc_subsystem_configuration *conf;
+		const struct smsc_ircc_subsystem_configuration *conf;
 
 		/*
 		 * Cache the subsystem vendor/device:
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 186cd28a61c..f504b262ba3 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -29,7 +29,7 @@ F02 Oct/28/02: Add SB device ID for 3147 and 3177.
 
 2004-02-16: <sda@bdit.de>
 - Removed unneeded 'legacy' pci stuff.
-- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff.
+- Make sure SIR mode is set (hw_init()) before calling mode-dependent stuff.
 - On speed change from core, don't send SIR frame with new speed. 
   Use current speed and change speeds later.
 - Make module-param dongle_id actually work.
@@ -334,7 +334,7 @@ static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
 	self->io.dongle_id = dongle_id;
 
 	/* The only value we must override it the baudrate */
-	/* Maximum speeds and capabilities are dongle-dependant. */
+	/* Maximum speeds and capabilities are dongle-dependent. */
 	switch( self->io.dongle_id ){
 	case 0x0d:
 		self->qos.baud_rate.bits =
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index d66fab854bf..a076eb12534 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -209,7 +209,7 @@ enum vlsi_pio_irintr {
 	IRINTR_ACTEN	= 0x80,	/* activity interrupt enable */
 	IRINTR_ACTIVITY	= 0x40,	/* activity monitor (traffic detected) */
 	IRINTR_RPKTEN	= 0x20,	/* receive packet interrupt enable*/
-	IRINTR_RPKTINT	= 0x10,	/* rx-packet transfered from fifo to memory finished */
+	IRINTR_RPKTINT	= 0x10,	/* rx-packet transferred from fifo to memory finished */
 	IRINTR_TPKTEN	= 0x08,	/* transmit packet interrupt enable */
 	IRINTR_TPKTINT	= 0x04,	/* last bit of tx-packet+crc shifted to ir-pulser */
 	IRINTR_OE_EN	= 0x02,	/* UART rx fifo overrun error interrupt enable */
@@ -739,7 +739,7 @@ typedef struct vlsi_irda_dev {
 /* the remapped error flags we use for returning from frame
  * post-processing in vlsi_process_tx/rx() after it was completed
  * by the hardware. These functions either return the >=0 number
- * of transfered bytes in case of success or the negative (-)
+ * of transferred bytes in case of success or the negative (-)
  * of the or'ed error flags.
  */
 
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 8f3df044e81..49e8408f05f 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -157,9 +157,6 @@ struct ixgb_adapter {
 	u16 link_duplex;
 	struct work_struct tx_timeout_task;
 
-	struct timer_list blink_timer;
-	unsigned long led_status;
-
 	/* TX */
 	struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
 	unsigned int restart_queue;
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index cc53aa1541b..6da890b9534 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -104,10 +104,10 @@ ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 	ecmd->transceiver = XCVR_EXTERNAL;
 
 	if (netif_carrier_ok(adapter->netdev)) {
-		ecmd->speed = SPEED_10000;
+		ethtool_cmd_speed_set(ecmd, SPEED_10000);
 		ecmd->duplex = DUPLEX_FULL;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -129,9 +129,10 @@ static int
 ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
 	struct ixgb_adapter *adapter = netdev_priv(netdev);
+	u32 speed = ethtool_cmd_speed(ecmd);
 
 	if (ecmd->autoneg == AUTONEG_ENABLE ||
-	   ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)
+	    (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
 		return -EINVAL;
 
 	if (netif_running(adapter->netdev)) {
@@ -610,45 +611,23 @@ err_setup_rx:
 	return err;
 }
 
-/* toggle LED 4 times per second = 2 "blinks" per second */
-#define IXGB_ID_INTERVAL	(HZ/4)
-
-/* bit defines for adapter->led_status */
-#define IXGB_LED_ON		0
-
-static void
-ixgb_led_blink_callback(unsigned long data)
-{
-	struct ixgb_adapter *adapter = (struct ixgb_adapter *)data;
-
-	if (test_and_change_bit(IXGB_LED_ON, &adapter->led_status))
-		ixgb_led_off(&adapter->hw);
-	else
-		ixgb_led_on(&adapter->hw);
-
-	mod_timer(&adapter->blink_timer, jiffies + IXGB_ID_INTERVAL);
-}
-
 static int
-ixgb_phys_id(struct net_device *netdev, u32 data)
+ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
 {
 	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
-	if (!data)
-		data = INT_MAX;
-
-	if (!adapter->blink_timer.function) {
-		init_timer(&adapter->blink_timer);
-		adapter->blink_timer.function = ixgb_led_blink_callback;
-		adapter->blink_timer.data = (unsigned long)adapter;
-	}
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 2;
 
-	mod_timer(&adapter->blink_timer, jiffies);
+	case ETHTOOL_ID_ON:
+		ixgb_led_on(&adapter->hw);
+		break;
 
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&adapter->blink_timer);
-	ixgb_led_off(&adapter->hw);
-	clear_bit(IXGB_LED_ON, &adapter->led_status);
+	case ETHTOOL_ID_OFF:
+	case ETHTOOL_ID_INACTIVE:
+		ixgb_led_off(&adapter->hw);
+	}
 
 	return 0;
 }
@@ -766,7 +745,7 @@ static const struct ethtool_ops ixgb_ethtool_ops = {
 	.set_msglevel = ixgb_set_msglevel,
 	.set_tso = ixgb_set_tso,
 	.get_strings = ixgb_get_strings,
-	.phys_id = ixgb_phys_id,
+	.set_phys_id = ixgb_set_phys_id,
 	.get_sset_count = ixgb_get_sset_count,
 	.get_ethtool_stats = ixgb_get_ethtool_stats,
 	.get_flags = ethtool_op_get_flags,
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 8d468028bb5..e467b20ed1f 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -106,6 +106,7 @@
 #define IXGBE_MAX_VF_FUNCTIONS          64
 #define IXGBE_MAX_VFTA_ENTRIES          128
 #define MAX_EMULATION_MAC_ADDRS         16
+#define IXGBE_MAX_PF_MACVLANS           15
 #define VMDQ_P(p)   ((p) + adapter->num_vfs)
 
 struct vf_data_storage {
@@ -121,6 +122,15 @@ struct vf_data_storage {
 	u16 tx_rate;
 };
 
+struct vf_macvlans {
+	struct list_head l;
+	int vf;
+	int rar_entry;
+	bool free;
+	bool is_macvlan;
+	u8 vf_macvlan[ETH_ALEN];
+};
+
 /* wrapper around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer */
 struct ixgbe_tx_buffer {
@@ -331,10 +341,52 @@ struct ixgbe_q_vector {
 
 /* board specific private data structure */
 struct ixgbe_adapter {
-	struct timer_list watchdog_timer;
+	unsigned long state;
+
+	/* Some features need tri-state capability,
+	 * thus the additional *_CAPABLE flags.
+	 */
+	u32 flags;
+#define IXGBE_FLAG_RX_CSUM_ENABLED              (u32)(1)
+#define IXGBE_FLAG_MSI_CAPABLE                  (u32)(1 << 1)
+#define IXGBE_FLAG_MSI_ENABLED                  (u32)(1 << 2)
+#define IXGBE_FLAG_MSIX_CAPABLE                 (u32)(1 << 3)
+#define IXGBE_FLAG_MSIX_ENABLED                 (u32)(1 << 4)
+#define IXGBE_FLAG_RX_1BUF_CAPABLE              (u32)(1 << 6)
+#define IXGBE_FLAG_RX_PS_CAPABLE                (u32)(1 << 7)
+#define IXGBE_FLAG_RX_PS_ENABLED                (u32)(1 << 8)
+#define IXGBE_FLAG_IN_NETPOLL                   (u32)(1 << 9)
+#define IXGBE_FLAG_DCA_ENABLED                  (u32)(1 << 10)
+#define IXGBE_FLAG_DCA_CAPABLE                  (u32)(1 << 11)
+#define IXGBE_FLAG_IMIR_ENABLED                 (u32)(1 << 12)
+#define IXGBE_FLAG_MQ_CAPABLE                   (u32)(1 << 13)
+#define IXGBE_FLAG_DCB_ENABLED                  (u32)(1 << 14)
+#define IXGBE_FLAG_RSS_ENABLED                  (u32)(1 << 16)
+#define IXGBE_FLAG_RSS_CAPABLE                  (u32)(1 << 17)
+#define IXGBE_FLAG_VMDQ_CAPABLE                 (u32)(1 << 18)
+#define IXGBE_FLAG_VMDQ_ENABLED                 (u32)(1 << 19)
+#define IXGBE_FLAG_FAN_FAIL_CAPABLE             (u32)(1 << 20)
+#define IXGBE_FLAG_NEED_LINK_UPDATE             (u32)(1 << 22)
+#define IXGBE_FLAG_NEED_LINK_CONFIG             (u32)(1 << 23)
+#define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 24)
+#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 25)
+#define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 26)
+#define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 27)
+#define IXGBE_FLAG_SRIOV_CAPABLE                (u32)(1 << 28)
+#define IXGBE_FLAG_SRIOV_ENABLED                (u32)(1 << 29)
+
+	u32 flags2;
+#define IXGBE_FLAG2_RSC_CAPABLE                 (u32)(1)
+#define IXGBE_FLAG2_RSC_ENABLED                 (u32)(1 << 1)
+#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE         (u32)(1 << 2)
+#define IXGBE_FLAG2_TEMP_SENSOR_EVENT           (u32)(1 << 3)
+#define IXGBE_FLAG2_SEARCH_FOR_SFP              (u32)(1 << 4)
+#define IXGBE_FLAG2_SFP_NEEDS_RESET             (u32)(1 << 5)
+#define IXGBE_FLAG2_RESET_REQUESTED             (u32)(1 << 6)
+#define IXGBE_FLAG2_FDIR_REQUIRES_REINIT        (u32)(1 << 7)
+
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
 	u16 bd_number;
-	struct work_struct reset_task;
 	struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
 
 	/* DCB parameters */
@@ -377,43 +429,6 @@ struct ixgbe_adapter {
 	u32 alloc_rx_page_failed;
 	u32 alloc_rx_buff_failed;
 
-	/* Some features need tri-state capability,
-	 * thus the additional *_CAPABLE flags.
-	 */
-	u32 flags;
-#define IXGBE_FLAG_RX_CSUM_ENABLED              (u32)(1)
-#define IXGBE_FLAG_MSI_CAPABLE                  (u32)(1 << 1)
-#define IXGBE_FLAG_MSI_ENABLED                  (u32)(1 << 2)
-#define IXGBE_FLAG_MSIX_CAPABLE                 (u32)(1 << 3)
-#define IXGBE_FLAG_MSIX_ENABLED                 (u32)(1 << 4)
-#define IXGBE_FLAG_RX_1BUF_CAPABLE              (u32)(1 << 6)
-#define IXGBE_FLAG_RX_PS_CAPABLE                (u32)(1 << 7)
-#define IXGBE_FLAG_RX_PS_ENABLED                (u32)(1 << 8)
-#define IXGBE_FLAG_IN_NETPOLL                   (u32)(1 << 9)
-#define IXGBE_FLAG_DCA_ENABLED                  (u32)(1 << 10)
-#define IXGBE_FLAG_DCA_CAPABLE                  (u32)(1 << 11)
-#define IXGBE_FLAG_IMIR_ENABLED                 (u32)(1 << 12)
-#define IXGBE_FLAG_MQ_CAPABLE                   (u32)(1 << 13)
-#define IXGBE_FLAG_DCB_ENABLED                  (u32)(1 << 14)
-#define IXGBE_FLAG_RSS_ENABLED                  (u32)(1 << 16)
-#define IXGBE_FLAG_RSS_CAPABLE                  (u32)(1 << 17)
-#define IXGBE_FLAG_VMDQ_CAPABLE                 (u32)(1 << 18)
-#define IXGBE_FLAG_VMDQ_ENABLED                 (u32)(1 << 19)
-#define IXGBE_FLAG_FAN_FAIL_CAPABLE             (u32)(1 << 20)
-#define IXGBE_FLAG_NEED_LINK_UPDATE             (u32)(1 << 22)
-#define IXGBE_FLAG_IN_SFP_LINK_TASK             (u32)(1 << 23)
-#define IXGBE_FLAG_IN_SFP_MOD_TASK              (u32)(1 << 24)
-#define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 25)
-#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 26)
-#define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 27)
-#define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 28)
-#define IXGBE_FLAG_SRIOV_CAPABLE                (u32)(1 << 29)
-#define IXGBE_FLAG_SRIOV_ENABLED                (u32)(1 << 30)
-
-	u32 flags2;
-#define IXGBE_FLAG2_RSC_CAPABLE                 (u32)(1)
-#define IXGBE_FLAG2_RSC_ENABLED                 (u32)(1 << 1)
-#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE         (u32)(1 << 2)
 /* default to trying for four seconds */
 #define IXGBE_TRY_LINK_TIMEOUT (4 * HZ)
 
@@ -434,7 +449,6 @@ struct ixgbe_adapter {
 	u32 rx_eitr_param;
 	u32 tx_eitr_param;
 
-	unsigned long state;
 	u64 tx_busy;
 	unsigned int tx_ring_count;
 	unsigned int rx_ring_count;
@@ -443,15 +457,12 @@ struct ixgbe_adapter {
 	bool link_up;
 	unsigned long link_check_timeout;
 
-	struct work_struct watchdog_task;
-	struct work_struct sfp_task;
-	struct timer_list sfp_timer;
-	struct work_struct multispeed_fiber_task;
-	struct work_struct sfp_config_module_task;
+	struct work_struct service_task;
+	struct timer_list service_timer;
 	u32 fdir_pballoc;
 	u32 atr_sample_rate;
+	unsigned long fdir_overflow; /* number of times ATR was backed off */
 	spinlock_t fdir_perfect_lock;
-	struct work_struct fdir_reinit_task;
 #ifdef IXGBE_FCOE
 	struct ixgbe_fcoe fcoe;
 #endif /* IXGBE_FCOE */
@@ -461,7 +472,7 @@ struct ixgbe_adapter {
 	u16 eeprom_version;
 
 	int node;
-	struct work_struct check_overtemp_task;
+	u32 led_reg;
 	u32 interrupt_event;
 	char lsc_int_name[IFNAMSIZ + 9];
 
@@ -470,13 +481,17 @@ struct ixgbe_adapter {
 	unsigned int num_vfs;
 	struct vf_data_storage *vfinfo;
 	int vf_rate_link_speed;
+	struct vf_macvlans vf_mvs;
+	struct vf_macvlans *mv_list;
+	bool antispoofing_enabled;
 };
 
 enum ixbge_state_t {
 	__IXGBE_TESTING,
 	__IXGBE_RESETTING,
 	__IXGBE_DOWN,
-	__IXGBE_SFP_MODULE_NOT_FOUND
+	__IXGBE_SERVICE_SCHED,
+	__IXGBE_IN_SFP_INIT,
 };
 
 struct ixgbe_rsc_cb {
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 845c679c8b8..8179e5060a1 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -37,6 +37,7 @@
 #define IXGBE_82598_RAR_ENTRIES   16
 #define IXGBE_82598_MC_TBL_SIZE  128
 #define IXGBE_82598_VFT_TBL_SIZE 128
+#define IXGBE_82598_RX_PB_SIZE	 512
 
 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
                                          ixgbe_link_speed speed,
@@ -197,14 +198,35 @@ out:
  *  @hw: pointer to hardware structure
  *
  *  Starts the hardware using the generic start_hw function.
- *  Then set pcie completion timeout
+ *  Disables relaxed ordering Then set pcie completion timeout
+ *
  **/
 static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 {
+	u32 regval;
+	u32 i;
 	s32 ret_val = 0;
 
 	ret_val = ixgbe_start_hw_generic(hw);
 
+	/* Disable relaxed ordering */
+	for (i = 0; ((i < hw->mac.max_tx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+		regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+	}
+
+	for (i = 0; ((i < hw->mac.max_rx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+			    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+
+	hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE;
+
 	/* set the completion timeout for interface */
 	if (ret_val == 0)
 		ixgbe_set_pcie_completion_timeout(hw);
@@ -1064,7 +1086,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
 			sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
 			if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
 				break;
-			msleep(10);
+			usleep_range(10000, 20000);
 		}
 
 		if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
@@ -1188,6 +1210,38 @@ out:
 	return physical_layer;
 }
 
+/**
+ *  ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
+ *  port devices.
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls common function and corrects issue with some single port devices
+ *  that enable LAN1 but not LAN0.
+ **/
+static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_bus_info *bus = &hw->bus;
+	u16 pci_gen = 0;
+	u16 pci_ctrl2 = 0;
+
+	ixgbe_set_lan_id_multi_port_pcie(hw);
+
+	/* check if LAN0 is disabled */
+	hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
+	if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
+
+		hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
+
+		/* if LAN0 is completely disabled force function to 0 */
+		if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
+		    !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
+		    !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
+
+			bus->func = 0;
+		}
+	}
+}
+
 static struct ixgbe_mac_operations mac_ops_82598 = {
 	.init_hw		= &ixgbe_init_hw_generic,
 	.reset_hw		= &ixgbe_reset_hw_82598,
@@ -1199,7 +1253,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.get_mac_addr		= &ixgbe_get_mac_addr_generic,
 	.stop_adapter		= &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
-	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
+	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie_82598,
 	.read_analog_reg8	= &ixgbe_read_analog_reg8_82598,
 	.write_analog_reg8	= &ixgbe_write_analog_reg8_82598,
 	.setup_link		= &ixgbe_setup_mac_link_82598,
@@ -1227,6 +1281,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
 	.init_params		= &ixgbe_init_eeprom_params_generic,
 	.read			= &ixgbe_read_eerd_generic,
+	.read_buffer		= &ixgbe_read_eerd_buffer_generic,
 	.calc_checksum          = &ixgbe_calc_eeprom_checksum_generic,
 	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
 	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 00aeba385a2..8ee661245af 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -38,6 +38,7 @@
 #define IXGBE_82599_RAR_ENTRIES   128
 #define IXGBE_82599_MC_TBL_SIZE   128
 #define IXGBE_82599_VFT_TBL_SIZE  128
+#define IXGBE_82599_RX_PB_SIZE	  512
 
 static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
 static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
@@ -61,6 +62,7 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
                                          bool autoneg,
                                          bool autoneg_wait_to_complete);
 static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
 
 static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 {
@@ -86,7 +88,8 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 		if ((mac->ops.get_media_type(hw) ==
 		     ixgbe_media_type_backplane) &&
 		    (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
-		     hw->phy.smart_speed == ixgbe_smart_speed_on))
+		     hw->phy.smart_speed == ixgbe_smart_speed_on) &&
+		     !ixgbe_verify_lesm_fw_enabled_82599(hw))
 			mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
 		else
 			mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
@@ -107,7 +110,6 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 
 		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
 		                                              &data_offset);
-
 		if (ret_val != 0)
 			goto setup_sfp_out;
 
@@ -127,9 +129,13 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 		}
 
 		/* Release the semaphore */
-		ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
-		/* Delay obtaining semaphore again to allow FW access */
-		msleep(hw->eeprom.semaphore_delay);
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+		/*
+		 * Delay obtaining semaphore again to allow FW access,
+		 * semaphore_delay is in ms usleep_range needs us.
+		 */
+		usleep_range(hw->eeprom.semaphore_delay * 1000,
+			     hw->eeprom.semaphore_delay * 2000);
 
 		/* Now restart DSP by setting Restart_AN and clearing LMS */
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
@@ -138,7 +144,7 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 
 		/* Wait for AN to leave state 0 */
 		for (i = 0; i < 10; i++) {
-			msleep(4);
+			usleep_range(4000, 8000);
 			reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
 			if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
 				break;
@@ -353,6 +359,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82599_SFP:
 	case IXGBE_DEV_ID_82599_SFP_FCOE:
 	case IXGBE_DEV_ID_82599_SFP_EM:
+	case IXGBE_DEV_ID_82599_SFP_SF2:
 		media_type = ixgbe_media_type_fiber;
 		break;
 	case IXGBE_DEV_ID_82599_CX4:
@@ -361,6 +368,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82599_T3_LOM:
 		media_type = ixgbe_media_type_copper;
 		break;
+	case IXGBE_DEV_ID_82599_LS:
+		media_type = ixgbe_media_type_fiber_lco;
+		break;
 	default:
 		media_type = ixgbe_media_type_unknown;
 		break;
@@ -486,7 +496,7 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
  *
  *  Set the link speed in the AUTOC register and restarts link.
  **/
-s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
                                           ixgbe_link_speed speed,
                                           bool autoneg,
                                           bool autoneg_wait_to_complete)
@@ -1176,7 +1186,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
 		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
 		                   IXGBE_FDIRCTRL_INIT_DONE)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
 	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
 		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
@@ -1271,7 +1281,7 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
 		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
 		                   IXGBE_FDIRCTRL_INIT_DONE)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
 	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
 		hw_dbg(hw, "Flow Director Perfect poll time exceeded!\n");
@@ -1740,30 +1750,29 @@ static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
  *  ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
  *  @hw: pointer to hardware structure
  *
- *  Starts the hardware using the generic start_hw function.
- *  Then performs device-specific:
- *  Clears the rate limiter registers.
+ *  Starts the hardware using the generic start_hw function
+ *  and the generation start_hw function.
+ *  Then performs revision-specific operations, if any.
  **/
 static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
 {
-	u32 q_num;
-	s32 ret_val;
+	s32 ret_val = 0;
 
 	ret_val = ixgbe_start_hw_generic(hw);
+	if (ret_val != 0)
+		goto out;
 
-	/* Clear the rate limiters */
-	for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) {
-		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, q_num);
-		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
-	}
-	IXGBE_WRITE_FLUSH(hw);
+	ret_val = ixgbe_start_hw_gen2(hw);
+	if (ret_val != 0)
+		goto out;
 
 	/* We need to run link autotry after the driver loads */
 	hw->mac.autotry_restart = true;
+	hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE;
 
 	if (ret_val == 0)
 		ret_val = ixgbe_verify_fw_version_82599(hw);
-
+out:
 	return ret_val;
 }
 
@@ -1775,7 +1784,7 @@ static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
  *  If PHY already detected, maintains current PHY type in hw struct,
  *  otherwise executes the PHY detection routine.
  **/
-s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
 {
 	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
 
@@ -1968,21 +1977,6 @@ static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
 }
 
 /**
- *  ixgbe_get_device_caps_82599 - Get additional device capabilities
- *  @hw: pointer to hardware structure
- *  @device_caps: the EEPROM word with the extra device capabilities
- *
- *  This function will read the EEPROM location for the device capabilities,
- *  and return the word through device_caps.
- **/
-static s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
-{
-	hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
-
-	return 0;
-}
-
-/**
  *  ixgbe_verify_fw_version_82599 - verify fw version for 82599
  *  @hw: pointer to hardware structure
  *
@@ -2030,6 +2024,110 @@ fw_version_out:
 	return status;
 }
 
+/**
+ *  ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns true if the LESM FW module is present and enabled. Otherwise
+ *  returns false. Smart Speed must be disabled if LESM FW module is enabled.
+ **/
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+{
+	bool lesm_enabled = false;
+	u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
+	s32 status;
+
+	/* get the offset to the Firmware Module block */
+	status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+	if ((status != 0) ||
+	    (fw_offset == 0) || (fw_offset == 0xFFFF))
+		goto out;
+
+	/* get the offset to the LESM Parameters block */
+	status = hw->eeprom.ops.read(hw, (fw_offset +
+				     IXGBE_FW_LESM_PARAMETERS_PTR),
+				     &fw_lesm_param_offset);
+
+	if ((status != 0) ||
+	    (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
+		goto out;
+
+	/* get the lesm state word */
+	status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
+				     IXGBE_FW_LESM_STATE_1),
+				     &fw_lesm_state);
+
+	if ((status == 0) &&
+	    (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
+		lesm_enabled = true;
+
+out:
+	return lesm_enabled;
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Retrieves 16 bit word(s) read from EEPROM
+ **/
+static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+					  u16 words, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val = IXGBE_ERR_CONFIG;
+
+	/*
+	 * If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if ((eeprom->type == ixgbe_eeprom_spi) &&
+	    (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
+		ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
+							 data);
+	else
+		ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
+								    words,
+								    data);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_read_eeprom_82599 - Read EEPROM word using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM
+ **/
+static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+				   u16 offset, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val = IXGBE_ERR_CONFIG;
+
+	/*
+	 * If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if ((eeprom->type == ixgbe_eeprom_spi) &&
+	    (offset <= IXGBE_EERD_MAX_ADDR))
+		ret_val = ixgbe_read_eerd_generic(hw, offset, data);
+	else
+		ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+
+	return ret_val;
+}
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -2040,7 +2138,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
 	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
-	.get_device_caps        = &ixgbe_get_device_caps_82599,
+	.get_device_caps        = &ixgbe_get_device_caps_generic,
 	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
@@ -2076,8 +2174,10 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 
 static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 	.init_params		= &ixgbe_init_eeprom_params_generic,
-	.read			= &ixgbe_read_eerd_generic,
+	.read			= &ixgbe_read_eeprom_82599,
+	.read_buffer		= &ixgbe_read_eeprom_buffer_82599,
 	.write			= &ixgbe_write_eeprom_generic,
+	.write_buffer		= &ixgbe_write_eeprom_buffer_bit_bang_generic,
 	.calc_checksum		= &ixgbe_calc_eeprom_checksum_generic,
 	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
 	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index bcd952916eb..b894b42a741 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -54,6 +54,13 @@ static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw);
 static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
 			      u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
 static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					     u16 words, u16 *data);
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					     u16 words, u16 *data);
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+						 u16 offset);
 
 /**
  *  ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
@@ -96,6 +103,45 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_start_hw_gen2 - Init sequence for common device family
+ *  @hw: pointer to hw structure
+ *
+ * Performs the init sequence common to the second generation
+ * of 10 GbE devices.
+ * Devices in the second generation:
+ *     82599
+ *     X540
+ **/
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 regval;
+
+	/* Clear the rate limiters */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
+	}
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Disable relaxed ordering */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+		regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+	}
+
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+					IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+
+	return 0;
+}
+
+/**
  *  ixgbe_init_hw_generic - Generic hardware initialization
  *  @hw: pointer to hardware structure
  *
@@ -464,7 +510,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
 	reg_val &= ~(IXGBE_RXCTRL_RXEN);
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
 	IXGBE_WRITE_FLUSH(hw);
-	msleep(2);
+	usleep_range(2000, 4000);
 
 	/* Clear interrupt mask to stop from interrupts being generated */
 	IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
@@ -545,6 +591,8 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
 		/* Set default semaphore delay to 10ms which is a well
 		 * tested value */
 		eeprom->semaphore_delay = 10;
+		/* Clear EEPROM page size, it will be initialized as needed */
+		eeprom->word_page_size = 0;
 
 		/*
 		 * Check for EEPROM present first.
@@ -577,26 +625,78 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ *  ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
  *  @hw: pointer to hardware structure
- *  @offset: offset within the EEPROM to be written to
- *  @data: 16 bit word to be written to the EEPROM
+ *  @offset: offset within the EEPROM to write
+ *  @words: number of words
+ *  @data: 16 bit word(s) to write to EEPROM
  *
- *  If ixgbe_eeprom_update_checksum is not called after this function, the
- *  EEPROM will most likely contain an invalid checksum.
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
  **/
-s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					       u16 words, u16 *data)
 {
-	s32 status;
-	u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+	s32 status = 0;
+	u16 i, count;
 
 	hw->eeprom.ops.init_params(hw);
 
-	if (offset >= hw->eeprom.word_size) {
+	if (words == 0) {
+		status = IXGBE_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
+
+	if (offset + words > hw->eeprom.word_size) {
 		status = IXGBE_ERR_EEPROM;
 		goto out;
 	}
 
+	/*
+	 * The EEPROM page size cannot be queried from the chip. We do lazy
+	 * initialization. It is worth to do that when we write large buffer.
+	 */
+	if ((hw->eeprom.word_page_size == 0) &&
+	    (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
+		ixgbe_detect_eeprom_page_size_generic(hw, offset);
+
+	/*
+	 * We cannot hold synchronization semaphores for too long
+	 * to avoid other entity starvation. However it is more efficient
+	 * to read in bursts than synchronizing access for each word.
+	 */
+	for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+		count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+			 IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+		status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
+							    count, &data[i]);
+
+		if (status != 0)
+			break;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @words: number of word(s)
+ *  @data: 16 bit word(s) to be written to the EEPROM
+ *
+ *  If ixgbe_eeprom_update_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data)
+{
+	s32 status;
+	u16 word;
+	u16 page_size;
+	u16 i;
+	u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+
 	/* Prepare the EEPROM for writing  */
 	status = ixgbe_acquire_eeprom(hw);
 
@@ -608,62 +708,147 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
 	}
 
 	if (status == 0) {
-		ixgbe_standby_eeprom(hw);
+		for (i = 0; i < words; i++) {
+			ixgbe_standby_eeprom(hw);
 
-		/*  Send the WRITE ENABLE command (8 bit opcode )  */
-		ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI,
-		                            IXGBE_EEPROM_OPCODE_BITS);
+			/*  Send the WRITE ENABLE command (8 bit opcode )  */
+			ixgbe_shift_out_eeprom_bits(hw,
+						  IXGBE_EEPROM_WREN_OPCODE_SPI,
+						  IXGBE_EEPROM_OPCODE_BITS);
 
-		ixgbe_standby_eeprom(hw);
+			ixgbe_standby_eeprom(hw);
 
-		/*
-		 * Some SPI eeproms use the 8th address bit embedded in the
-		 * opcode
-		 */
-		if ((hw->eeprom.address_bits == 8) && (offset >= 128))
-			write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+			/*
+			 * Some SPI eeproms use the 8th address bit embedded
+			 * in the opcode
+			 */
+			if ((hw->eeprom.address_bits == 8) &&
+			    ((offset + i) >= 128))
+				write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+			/* Send the Write command (8-bit opcode + addr) */
+			ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+						    IXGBE_EEPROM_OPCODE_BITS);
+			ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+						    hw->eeprom.address_bits);
+
+			page_size = hw->eeprom.word_page_size;
+
+			/* Send the data in burst via SPI*/
+			do {
+				word = data[i];
+				word = (word >> 8) | (word << 8);
+				ixgbe_shift_out_eeprom_bits(hw, word, 16);
+
+				if (page_size == 0)
+					break;
+
+				/* do not wrap around page */
+				if (((offset + i) & (page_size - 1)) ==
+				    (page_size - 1))
+					break;
+			} while (++i < words);
+
+			ixgbe_standby_eeprom(hw);
+			usleep_range(10000, 20000);
+		}
+		/* Done with writing - release the EEPROM */
+		ixgbe_release_eeprom(hw);
+	}
 
-		/* Send the Write command (8-bit opcode + addr) */
-		ixgbe_shift_out_eeprom_bits(hw, write_opcode,
-		                            IXGBE_EEPROM_OPCODE_BITS);
-		ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
-		                            hw->eeprom.address_bits);
+	return status;
+}
 
-		/* Send the data */
-		data = (data >> 8) | (data << 8);
-		ixgbe_shift_out_eeprom_bits(hw, data, 16);
-		ixgbe_standby_eeprom(hw);
+/**
+ *  ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word to be written to the EEPROM
+ *
+ *  If ixgbe_eeprom_update_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status;
 
-		/* Done with writing - release the EEPROM */
-		ixgbe_release_eeprom(hw);
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
 	}
 
+	status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
+
 out:
 	return status;
 }
 
 /**
- *  ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ *  ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
  *  @hw: pointer to hardware structure
  *  @offset: offset within the EEPROM to be read
- *  @data: read 16 bit value from EEPROM
+ *  @words: number of word(s)
+ *  @data: read 16 bit words(s) from EEPROM
  *
- *  Reads 16 bit value from EEPROM through bit-bang method
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
  **/
-s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
-                                       u16 *data)
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data)
 {
-	s32 status;
-	u16 word_in;
-	u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+	s32 status = 0;
+	u16 i, count;
 
 	hw->eeprom.ops.init_params(hw);
 
-	if (offset >= hw->eeprom.word_size) {
+	if (words == 0) {
+		status = IXGBE_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
+
+	if (offset + words > hw->eeprom.word_size) {
 		status = IXGBE_ERR_EEPROM;
 		goto out;
 	}
 
+	/*
+	 * We cannot hold synchronization semaphores for too long
+	 * to avoid other entity starvation. However it is more efficient
+	 * to read in bursts than synchronizing access for each word.
+	 */
+	for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+		count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+			 IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+
+		status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
+							   count, &data[i]);
+
+		if (status != 0)
+			break;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @words: number of word(s)
+ *  @data: read 16 bit word(s) from EEPROM
+ *
+ *  Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+					     u16 words, u16 *data)
+{
+	s32 status;
+	u16 word_in;
+	u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+	u16 i;
+
 	/* Prepare the EEPROM for reading  */
 	status = ixgbe_acquire_eeprom(hw);
 
@@ -675,29 +860,145 @@ s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
 	}
 
 	if (status == 0) {
-		ixgbe_standby_eeprom(hw);
+		for (i = 0; i < words; i++) {
+			ixgbe_standby_eeprom(hw);
+			/*
+			 * Some SPI eeproms use the 8th address bit embedded
+			 * in the opcode
+			 */
+			if ((hw->eeprom.address_bits == 8) &&
+			    ((offset + i) >= 128))
+				read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+			/* Send the READ command (opcode + addr) */
+			ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+						    IXGBE_EEPROM_OPCODE_BITS);
+			ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+						    hw->eeprom.address_bits);
+
+			/* Read the data. */
+			word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+			data[i] = (word_in >> 8) | (word_in << 8);
+		}
 
-		/*
-		 * Some SPI eeproms use the 8th address bit embedded in the
-		 * opcode
-		 */
-		if ((hw->eeprom.address_bits == 8) && (offset >= 128))
-			read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+		/* End this read operation */
+		ixgbe_release_eeprom(hw);
+	}
 
-		/* Send the READ command (opcode + addr) */
-		ixgbe_shift_out_eeprom_bits(hw, read_opcode,
-		                            IXGBE_EEPROM_OPCODE_BITS);
-		ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
-		                            hw->eeprom.address_bits);
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit value from EEPROM
+ *
+ *  Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+				       u16 *data)
+{
+	s32 status;
 
-		/* Read the data. */
-		word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
-		*data = (word_in >> 8) | (word_in << 8);
+	hw->eeprom.ops.init_params(hw);
 
-		/* End this read operation */
-		ixgbe_release_eeprom(hw);
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
+	status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of word in the EEPROM to read
+ *  @words: number of word(s)
+ *  @data: 16 bit word(s) from the EEPROM
+ *
+ *  Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				   u16 words, u16 *data)
+{
+	u32 eerd;
+	s32 status = 0;
+	u32 i;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (words == 0) {
+		status = IXGBE_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
 	}
 
+	for (i = 0; i < words; i++) {
+		eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) +
+		       IXGBE_EEPROM_RW_REG_START;
+
+		IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+
+		if (status == 0) {
+			data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+				   IXGBE_EEPROM_RW_REG_DATA);
+		} else {
+			hw_dbg(hw, "Eeprom read timed out\n");
+			goto out;
+		}
+	}
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be used as a scratch pad
+ *
+ *  Discover EEPROM page size by writing marching data at given offset.
+ *  This function is called only when we are writing a new large buffer
+ *  at given offset so the data would be overwritten anyway.
+ **/
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+						 u16 offset)
+{
+	u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
+	s32 status = 0;
+	u16 i;
+
+	for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
+		data[i] = i;
+
+	hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
+	status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
+					     IXGBE_EEPROM_PAGE_SIZE_MAX, data);
+	hw->eeprom.word_page_size = 0;
+	if (status != 0)
+		goto out;
+
+	status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+	if (status != 0)
+		goto out;
+
+	/*
+	 * When writing in burst more than the actual page size
+	 * EEPROM address wraps around current page.
+	 */
+	hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
+
+	hw_dbg(hw, "Detected EEPROM page size = %d words.",
+	       hw->eeprom.word_page_size);
 out:
 	return status;
 }
@@ -712,33 +1013,75 @@ out:
  **/
 s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
 {
-	u32 eerd;
-	s32 status;
+	return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
+}
+
+/**
+ *  ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				    u16 words, u16 *data)
+{
+	u32 eewr;
+	s32 status = 0;
+	u16 i;
 
 	hw->eeprom.ops.init_params(hw);
 
+	if (words == 0) {
+		status = IXGBE_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
+
 	if (offset >= hw->eeprom.word_size) {
 		status = IXGBE_ERR_EEPROM;
 		goto out;
 	}
 
-	eerd = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) +
-	       IXGBE_EEPROM_RW_REG_START;
+	for (i = 0; i < words; i++) {
+		eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+		       (data[i] << IXGBE_EEPROM_RW_REG_DATA) |
+		       IXGBE_EEPROM_RW_REG_START;
 
-	IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
-	status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status != 0) {
+			hw_dbg(hw, "Eeprom write EEWR timed out\n");
+			goto out;
+		}
 
-	if (status == 0)
-		*data = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
-		         IXGBE_EEPROM_RW_REG_DATA);
-	else
-		hw_dbg(hw, "Eeprom read timed out\n");
+		IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status != 0) {
+			hw_dbg(hw, "Eeprom write EEWR timed out\n");
+			goto out;
+		}
+	}
 
 out:
 	return status;
 }
 
 /**
+ *  ixgbe_write_eewr_generic - Write EEPROM word using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
+}
+
+/**
  *  ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
  *  @hw: pointer to hardware structure
  *  @ee_reg: EEPROM flag for polling
@@ -746,7 +1089,7 @@ out:
  *  Polls the status bit (bit 1) of the EERD or EEWR to determine when the
  *  read or write is done respectively.
  **/
-s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
 {
 	u32 i;
 	u32 reg;
@@ -846,6 +1189,28 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
 		udelay(50);
 	}
 
+	if (i == timeout) {
+		hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore "
+		       "not granted.\n");
+		/*
+		 * this release is particularly important because our attempts
+		 * above to get the semaphore may have succeeded, and if there
+		 * was a timeout, we should unconditionally clear the semaphore
+		 * bits to free the driver to make progress
+		 */
+		ixgbe_release_eeprom_semaphore(hw);
+
+		udelay(50);
+		/*
+		 * one last try
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+		if (!(swsm & IXGBE_SWSM_SMBI))
+			status = 0;
+	}
+
 	/* Now get the semaphore between SW/FW through the SWESMBI bit */
 	if (status == 0) {
 		for (i = 0; i < timeout; i++) {
@@ -1112,8 +1477,12 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
 
 	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
 
-	/* Delay before attempt to obtain semaphore again to allow FW access */
-	msleep(hw->eeprom.semaphore_delay);
+	/*
+	 * Delay before attempt to obtain semaphore again to allow FW
+	 * access. semaphore_delay is in ms we need us for usleep_range
+	 */
+	usleep_range(hw->eeprom.semaphore_delay * 1000,
+		     hw->eeprom.semaphore_delay * 2000);
 }
 
 /**
@@ -2189,7 +2558,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 		 * thread currently using resource (swmask)
 		 */
 		ixgbe_release_eeprom_semaphore(hw);
-		msleep(5);
+		usleep_range(5000, 10000);
 		timeout--;
 	}
 
@@ -2263,7 +2632,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 		autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 		autoc_reg |= IXGBE_AUTOC_FLU;
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-		msleep(10);
+		usleep_range(10000, 20000);
 	}
 
 	led_reg &= ~IXGBE_LED_MODE_MASK(index);
@@ -2883,3 +3252,18 @@ void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
 		pfvfspoof &= ~(1 << vf_target_shift);
 	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
 }
+
+/**
+ *  ixgbe_get_device_caps_generic - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word with the extra device capabilities
+ *
+ *  This function will read the EEPROM location for the device capabilities,
+ *  and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+	return 0;
+}
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 508f635fc2c..46be83cfb50 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -35,6 +35,7 @@ u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw);
 s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
 s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
 s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw);
 s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
 s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
                                   u32 pba_num_size);
@@ -48,14 +49,22 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
 
 s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
 s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					       u16 words, u16 *data);
 s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				   u16 words, u16 *data);
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+				    u16 words, u16 *data);
 s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
                                        u16 *data);
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+					      u16 words, u16 *data);
 u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
 s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
                                            u16 *checksum_val);
 s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
-s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
 
 s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
                           u32 enable_addr);
@@ -89,6 +98,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
 s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
 void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
 void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps);
 
 #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c
index 41c529fac0a..686a17aadef 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ixgbe/ixgbe_dcb.c
@@ -36,7 +36,7 @@
 /**
  * ixgbe_ieee_credits - This calculates the ieee traffic class
  * credits from the configured bandwidth percentages. Credits
- * are the smallest unit programable into the underlying
+ * are the smallest unit programmable into the underlying
  * hardware. The IEEE 802.1Qaz specification do not use bandwidth
  * groups so this is much simplified from the CEE case.
  */
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index 1bc57e52cee..771d01a60d0 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -289,7 +289,7 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
  * Configure queue statistics registers, all queues belonging to same traffic
  * class uses a single set of queue statistics counters.
  */
-s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
+static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
 {
 	u32 reg = 0;
 	u8  i   = 0;
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index 025af8c53dd..d50cf78c234 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -39,36 +39,52 @@
  */
 static s32 ixgbe_dcb_config_packet_buffers_82599(struct ixgbe_hw *hw, u8 rx_pba)
 {
-	s32 ret_val = 0;
-	u32 value = IXGBE_RXPBSIZE_64KB;
+	int num_tcs = IXGBE_MAX_PACKET_BUFFERS;
+	u32 rx_pb_size = hw->mac.rx_pb_size << IXGBE_RXPBSIZE_SHIFT;
+	u32 rxpktsize;
+	u32 txpktsize;
+	u32 txpbthresh;
 	u8  i = 0;
 
-	/* Setup Rx packet buffer sizes */
-	switch (rx_pba) {
-	case pba_80_48:
-		/* Setup the first four at 80KB */
-		value = IXGBE_RXPBSIZE_80KB;
-		for (; i < 4; i++)
-			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), value);
-		/* Setup the last four at 48KB...don't re-init i */
-		value = IXGBE_RXPBSIZE_48KB;
-		/* Fall Through */
-	case pba_equal:
-	default:
-		for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
-			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), value);
-
-		/* Setup Tx packet buffer sizes */
-		for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) {
-			IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i),
-			                IXGBE_TXPBSIZE_20KB);
-			IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i),
-			                IXGBE_TXPBTHRESH_DCB);
-		}
-		break;
+	/*
+	 * This really means configure the first half of the TCs
+	 * (Traffic Classes) to use 5/8 of the Rx packet buffer
+	 * space.  To determine the size of the buffer for each TC,
+	 * we are multiplying the average size by 5/4 and applying
+	 * it to half of the traffic classes.
+	 */
+	if (rx_pba == pba_80_48) {
+		rxpktsize = (rx_pb_size * 5) / (num_tcs * 4);
+		rx_pb_size -= rxpktsize * (num_tcs / 2);
+		for (; i < (num_tcs / 2); i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+	}
+
+	/* Divide the remaining Rx packet buffer evenly among the TCs */
+	rxpktsize = rx_pb_size / (num_tcs - i);
+	for (; i < num_tcs; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+
+	/*
+	 * Setup Tx packet buffer and threshold equally for all TCs
+	 * TXPBTHRESH register is set in K so divide by 1024 and subtract
+	 * 10 since the largest packet we support is just over 9K.
+	 */
+	txpktsize = IXGBE_TXPBSIZE_MAX / num_tcs;
+	txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX;
+	for (i = 0; i < num_tcs; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh);
+	}
+
+	/* Clear unused TCs, if any, to zero buffer size*/
+	for (; i < MAX_TRAFFIC_CLASS; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
 	}
 
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -285,12 +301,17 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en)
 		IXGBE_WRITE_REG(hw, IXGBE_FCCFG, reg);
 		/*
 		 * Enable Receive PFC
-		 * We will always honor XOFF frames we receive when
-		 * we are in PFC mode.
+		 * 82599 will always honor XOFF frames we receive when
+		 * we are in PFC mode however X540 only honors enabled
+		 * traffic classes.
 		 */
 		reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
 		reg &= ~IXGBE_MFLCN_RFCE;
 		reg |= IXGBE_MFLCN_RPFCE | IXGBE_MFLCN_DPF;
+
+		if (hw->mac.type == ixgbe_mac_X540)
+			reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
+
 		IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
 
 	} else {
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h
index 148fd8b477a..2de71a50315 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.h
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h
@@ -92,8 +92,10 @@
 #define IXGBE_RXPBSIZE_64KB     0x00010000 /* 64KB Packet Buffer */
 #define IXGBE_RXPBSIZE_80KB     0x00014000 /* 80KB Packet Buffer */
 #define IXGBE_RXPBSIZE_128KB    0x00020000 /* 128KB Packet Buffer */
+#define IXGBE_TXPBSIZE_MAX	0x00028000 /* 160KB Packet Buffer*/
 
 #define IXGBE_TXPBTHRESH_DCB    0xA        /* THRESH value for DCB mode */
+#define IXGBE_TXPKT_SIZE_MAX    0xA        /* Max Tx Packet size  */
 
 /* SECTXMINIFG DCB */
 #define IXGBE_SECTX_DCB		0x00001F00 /* DCB TX Buffer IFG */
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index fec4c724c37..5e7ed225851 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -347,31 +347,44 @@ static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority,
 static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct dcb_app app = {
+			      .selector = DCB_APP_IDTYPE_ETHTYPE,
+			      .protocol = ETH_P_FCOE,
+			     };
+	u8 up = dcb_getapp(netdev, &app);
 	int ret;
 
-	if (!adapter->dcb_set_bitmap ||
-	    !(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
-		return DCB_NO_HW_CHG;
-
 	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
 				 MAX_TRAFFIC_CLASS);
-
 	if (ret)
 		return DCB_NO_HW_CHG;
 
+	/* In IEEE mode app data must be parsed into DCBX format for
+	 * hardware routines.
+	 */
+	if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)
+		up = (1 << up);
+
+#ifdef IXGBE_FCOE
+	if (up && (up != (1 << adapter->fcoe.up)))
+		adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
+
 	/*
-	 * Only take down the adapter if an app change occured. FCoE
+	 * Only take down the adapter if an app change occurred. FCoE
 	 * may shuffle tx rings in this case and this can not be done
 	 * without a reset currently.
 	 */
 	if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
 		while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
-			msleep(1);
+			usleep_range(1000, 2000);
+
+		ixgbe_fcoe_setapp(adapter, up);
 
 		if (netif_running(netdev))
 			netdev->netdev_ops->ndo_stop(netdev);
 		ixgbe_clear_interrupt_scheme(adapter);
 	}
+#endif
 
 	if (adapter->dcb_cfg.pfc_mode_enable) {
 		switch (adapter->hw.mac.type) {
@@ -399,12 +412,14 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 		}
 	}
 
+#ifdef IXGBE_FCOE
 	if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
 		ixgbe_init_interrupt_scheme(adapter);
 		if (netif_running(netdev))
 			netdev->netdev_ops->ndo_open(netdev);
 		ret = DCB_HW_CHG_RST;
 	}
+#endif
 
 	if (adapter->dcb_set_bitmap & BIT_PFC) {
 		u8 pfc_en;
@@ -558,68 +573,6 @@ static u8 ixgbe_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id)
 	return dcb_getapp(netdev, &app);
 }
 
-/**
- * ixgbe_dcbnl_setapp - set the DCBX application user priority
- * @netdev : the corresponding netdev
- * @idtype : identifies the id as ether type or TCP/UDP port number
- * @id: id is either ether type or TCP/UDP port number
- * @up: the 802.1p user priority bitmap
- *
- * Returns : 0 on success or 1 on error
- */
-static u8 ixgbe_dcbnl_setapp(struct net_device *netdev,
-                             u8 idtype, u16 id, u8 up)
-{
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	u8 rval = 1;
-	struct dcb_app app = {
-			      .selector = idtype,
-			      .protocol = id,
-			      .priority = up
-			     };
-
-	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
-		return rval;
-
-	rval = dcb_setapp(netdev, &app);
-
-	switch (idtype) {
-	case DCB_APP_IDTYPE_ETHTYPE:
-#ifdef IXGBE_FCOE
-		if (id == ETH_P_FCOE) {
-			u8 old_tc;
-
-			/* Get current programmed tc */
-			old_tc = adapter->fcoe.tc;
-			rval = ixgbe_fcoe_setapp(adapter, up);
-
-			if (rval ||
-			   !(adapter->flags & IXGBE_FLAG_DCB_ENABLED) ||
-			   !(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
-				break;
-
-			/* The FCoE application priority may be changed multiple
-			 * times in quick sucession with switches that build up
-			 * TLVs. To avoid creating uneeded device resets this
-			 * checks the actual HW configuration and clears
-			 * BIT_APP_UPCHG if a HW configuration change is not
-			 * need
-			 */
-			if (old_tc == adapter->fcoe.tc)
-				adapter->dcb_set_bitmap &= ~BIT_APP_UPCHG;
-			else
-				adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
-		}
-#endif
-		break;
-	case DCB_APP_IDTYPE_PORTNUM:
-		break;
-	default:
-		break;
-	}
-	return rval;
-}
-
 static int ixgbe_dcbnl_ieee_getets(struct net_device *dev,
 				   struct ieee_ets *ets)
 {
@@ -745,25 +698,14 @@ static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev,
 
 	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
 		return -EINVAL;
-#ifdef IXGBE_FCOE
-	if (app->selector == 1 && app->protocol == ETH_P_FCOE) {
-		if (adapter->fcoe.tc == app->priority)
-			goto setapp;
 
-		/* In IEEE mode map up to tc 1:1 */
-		adapter->fcoe.tc = app->priority;
-		adapter->fcoe.up = app->priority;
+	dcb_setapp(dev, app);
 
-		/* Force hardware reset required to push FCoE
-		 * setup on {tx|rx}_rings
-		 */
-		adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
+#ifdef IXGBE_FCOE
+	if (app->selector == 1 && app->protocol == ETH_P_FCOE &&
+	    adapter->fcoe.tc == app->priority)
 		ixgbe_dcbnl_set_all(dev);
-	}
-
-setapp:
 #endif
-	dcb_setapp(dev, app);
 	return 0;
 }
 
@@ -838,7 +780,6 @@ const struct dcbnl_rtnl_ops dcbnl_ops = {
 	.getpfcstate	= ixgbe_dcbnl_getpfcstate,
 	.setpfcstate	= ixgbe_dcbnl_setpfcstate,
 	.getapp		= ixgbe_dcbnl_getapp,
-	.setapp		= ixgbe_dcbnl_setapp,
 	.getdcbx	= ixgbe_dcbnl_getdcbx,
 	.setdcbx	= ixgbe_dcbnl_setdcbx,
 };
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 76380a2b35a..cb1555bc854 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -84,6 +84,7 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"hw_rsc_flushed", IXGBE_STAT(rsc_total_flush)},
 	{"fdir_match", IXGBE_STAT(stats.fdirmatch)},
 	{"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
+	{"fdir_overflow", IXGBE_STAT(fdir_overflow)},
 	{"rx_fifo_errors", IXGBE_NETDEV_STAT(rx_fifo_errors)},
 	{"rx_missed_errors", IXGBE_NETDEV_STAT(rx_missed_errors)},
 	{"tx_aborted_errors", IXGBE_NETDEV_STAT(tx_aborted_errors)},
@@ -102,6 +103,10 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
 	{"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
 	{"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)},
+	{"os2bmc_rx_by_bmc", IXGBE_STAT(stats.o2bgptc)},
+	{"os2bmc_tx_by_bmc", IXGBE_STAT(stats.b2ospc)},
+	{"os2bmc_tx_by_host", IXGBE_STAT(stats.o2bspc)},
+	{"os2bmc_rx_by_host", IXGBE_STAT(stats.b2ogprc)},
 #ifdef IXGBE_FCOE
 	{"fcoe_bad_fccrc", IXGBE_STAT(stats.fccrc)},
 	{"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)},
@@ -288,20 +293,20 @@ static int ixgbe_get_settings(struct net_device *netdev,
 	if (link_up) {
 		switch (link_speed) {
 		case IXGBE_LINK_SPEED_10GB_FULL:
-			ecmd->speed = SPEED_10000;
+			ethtool_cmd_speed_set(ecmd, SPEED_10000);
 			break;
 		case IXGBE_LINK_SPEED_1GB_FULL:
-			ecmd->speed = SPEED_1000;
+			ethtool_cmd_speed_set(ecmd, SPEED_1000);
 			break;
 		case IXGBE_LINK_SPEED_100_FULL:
-			ecmd->speed = SPEED_100;
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
 			break;
 		default:
 			break;
 		}
 		ecmd->duplex = DUPLEX_FULL;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -346,9 +351,10 @@ static int ixgbe_set_settings(struct net_device *netdev,
 		}
 	} else {
 		/* in this case we currently only support 10Gb/FULL */
+		u32 speed = ethtool_cmd_speed(ecmd);
 		if ((ecmd->autoneg == AUTONEG_ENABLE) ||
 		    (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
-		    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+		    (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
 			return -EINVAL;
 	}
 
@@ -846,11 +852,8 @@ static int ixgbe_get_eeprom(struct net_device *netdev,
 	if (!eeprom_buff)
 		return -ENOMEM;
 
-	for (i = 0; i < eeprom_len; i++) {
-		if ((ret_val = hw->eeprom.ops.read(hw, first_word + i,
-		    &eeprom_buff[i])))
-			break;
-	}
+	ret_val = hw->eeprom.ops.read_buffer(hw, first_word, eeprom_len,
+					     eeprom_buff);
 
 	/* Device's eeprom is always little-endian, word addressable */
 	for (i = 0; i < eeprom_len; i++)
@@ -931,7 +934,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 	}
 
 	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
-		msleep(1);
+		usleep_range(1000, 2000);
 
 	if (!netif_running(adapter->netdev)) {
 		for (i = 0; i < adapter->num_tx_queues; i++)
@@ -1030,9 +1033,6 @@ static int ixgbe_get_sset_count(struct net_device *netdev, int sset)
 		return IXGBE_TEST_LEN;
 	case ETH_SS_STATS:
 		return IXGBE_STATS_LEN;
-	case ETH_SS_NTUPLE_FILTERS:
-		return ETHTOOL_MAX_NTUPLE_LIST_ENTRY *
-		       ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -1238,46 +1238,62 @@ static const struct ixgbe_reg_test reg_test_82598[] = {
 	{ 0, 0, 0, 0 }
 };
 
-static const u32 register_test_patterns[] = {
-	0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
-};
-
-#define REG_PATTERN_TEST(R, M, W)                                             \
-{                                                                             \
-	u32 pat, val, before;                                                 \
-	for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) {      \
-		before = readl(adapter->hw.hw_addr + R);                      \
-		writel((register_test_patterns[pat] & W),                     \
-		       (adapter->hw.hw_addr + R));                            \
-		val = readl(adapter->hw.hw_addr + R);                         \
-		if (val != (register_test_patterns[pat] & W & M)) {           \
-			e_err(drv, "pattern test reg %04X failed: got "       \
-			      "0x%08X expected 0x%08X\n",                     \
-			      R, val, (register_test_patterns[pat] & W & M)); \
-			*data = R;                                            \
-			writel(before, adapter->hw.hw_addr + R);              \
-			return 1;                                             \
-		}                                                             \
-		writel(before, adapter->hw.hw_addr + R);                      \
-	}                                                                     \
+static bool reg_pattern_test(struct ixgbe_adapter *adapter, u64 *data, int reg,
+			     u32 mask, u32 write)
+{
+	u32 pat, val, before;
+	static const u32 test_pattern[] = {
+		0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+
+	for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) {
+		before = readl(adapter->hw.hw_addr + reg);
+		writel((test_pattern[pat] & write),
+		       (adapter->hw.hw_addr + reg));
+		val = readl(adapter->hw.hw_addr + reg);
+		if (val != (test_pattern[pat] & write & mask)) {
+			e_err(drv, "pattern test reg %04X failed: got "
+			      "0x%08X expected 0x%08X\n",
+			      reg, val, (test_pattern[pat] & write & mask));
+			*data = reg;
+			writel(before, adapter->hw.hw_addr + reg);
+			return 1;
+		}
+		writel(before, adapter->hw.hw_addr + reg);
+	}
+	return 0;
 }
 
-#define REG_SET_AND_CHECK(R, M, W)                                            \
-{                                                                             \
-	u32 val, before;                                                      \
-	before = readl(adapter->hw.hw_addr + R);                              \
-	writel((W & M), (adapter->hw.hw_addr + R));                           \
-	val = readl(adapter->hw.hw_addr + R);                                 \
-	if ((W & M) != (val & M)) {                                           \
-		e_err(drv, "set/check reg %04X test failed: got 0x%08X "  \
-		      "expected 0x%08X\n", R, (val & M), (W & M));        \
-		*data = R;                                                    \
-		writel(before, (adapter->hw.hw_addr + R));                    \
-		return 1;                                                     \
-	}                                                                     \
-	writel(before, (adapter->hw.hw_addr + R));                            \
+static bool reg_set_and_check(struct ixgbe_adapter *adapter, u64 *data, int reg,
+			      u32 mask, u32 write)
+{
+	u32 val, before;
+	before = readl(adapter->hw.hw_addr + reg);
+	writel((write & mask), (adapter->hw.hw_addr + reg));
+	val = readl(adapter->hw.hw_addr + reg);
+	if ((write & mask) != (val & mask)) {
+		e_err(drv, "set/check reg %04X test failed: got 0x%08X "
+		      "expected 0x%08X\n", reg, (val & mask), (write & mask));
+		*data = reg;
+		writel(before, (adapter->hw.hw_addr + reg));
+		return 1;
+	}
+	writel(before, (adapter->hw.hw_addr + reg));
+	return 0;
 }
 
+#define REG_PATTERN_TEST(reg, mask, write)				      \
+	do {								      \
+		if (reg_pattern_test(adapter, data, reg, mask, write))	      \
+			return 1;					      \
+	} while (0)							      \
+
+
+#define REG_SET_AND_CHECK(reg, mask, write)				      \
+	do {								      \
+		if (reg_set_and_check(adapter, data, reg, mask, write))	      \
+			return 1;					      \
+	} while (0)							      \
+
 static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
 {
 	const struct ixgbe_reg_test *test;
@@ -1328,13 +1344,13 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
 			switch (test->test_type) {
 			case PATTERN_TEST:
 				REG_PATTERN_TEST(test->reg + (i * 0x40),
-						test->mask,
-						test->write);
+						 test->mask,
+						 test->write);
 				break;
 			case SET_READ_TEST:
 				REG_SET_AND_CHECK(test->reg + (i * 0x40),
-						test->mask,
-						test->write);
+						  test->mask,
+						  test->write);
 				break;
 			case WRITE_NO_TEST:
 				writel(test->write,
@@ -1343,18 +1359,18 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
 				break;
 			case TABLE32_TEST:
 				REG_PATTERN_TEST(test->reg + (i * 4),
-						test->mask,
-						test->write);
+						 test->mask,
+						 test->write);
 				break;
 			case TABLE64_TEST_LO:
 				REG_PATTERN_TEST(test->reg + (i * 8),
-						test->mask,
-						test->write);
+						 test->mask,
+						 test->write);
 				break;
 			case TABLE64_TEST_HI:
 				REG_PATTERN_TEST((test->reg + 4) + (i * 8),
-						test->mask,
-						test->write);
+						 test->mask,
+						 test->write);
 				break;
 			}
 		}
@@ -1417,7 +1433,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	/* Test each interrupt */
 	for (; i < 10; i++) {
@@ -1437,7 +1453,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 			                ~mask & 0x00007FFF);
 			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
 			                ~mask & 0x00007FFF);
-			msleep(10);
+			usleep_range(10000, 20000);
 
 			if (adapter->test_icr & mask) {
 				*data = 3;
@@ -1454,7 +1470,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 		adapter->test_icr = 0;
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
-		msleep(10);
+		usleep_range(10000, 20000);
 
 		if (!(adapter->test_icr &mask)) {
 			*data = 4;
@@ -1474,7 +1490,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 			                ~mask & 0x00007FFF);
 			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
 			                ~mask & 0x00007FFF);
-			msleep(10);
+			usleep_range(10000, 20000);
 
 			if (adapter->test_icr) {
 				*data = 5;
@@ -1485,7 +1501,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 
 	/* Disable all the interrupts */
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	/* Unhook test interrupt handler */
 	free_irq(irq, netdev);
@@ -1598,6 +1614,13 @@ static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 reg_data;
 
+	/* X540 needs to set the MACC.FLU bit to force link up */
+	if (adapter->hw.mac.type == ixgbe_mac_X540) {
+		reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_MACC);
+		reg_data |= IXGBE_MACC_FLU;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_MACC, reg_data);
+	}
+
 	/* right now we only support MAC loopback in the driver */
 	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
 	/* Setup MAC loopback */
@@ -1613,7 +1636,7 @@ static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
 	reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU;
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_AUTOC, reg_data);
 	IXGBE_WRITE_FLUSH(&adapter->hw);
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	/* Disable Atlas Tx lanes; re-enabled in reset path */
 	if (hw->mac.type == ixgbe_mac_82598EB) {
@@ -1999,25 +2022,30 @@ static int ixgbe_nway_reset(struct net_device *netdev)
 	return 0;
 }
 
-static int ixgbe_phys_id(struct net_device *netdev, u32 data)
+static int ixgbe_set_phys_id(struct net_device *netdev,
+			     enum ethtool_phys_id_state state)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
-	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-	u32 i;
 
-	if (!data || data > 300)
-		data = 300;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+		return 2;
 
-	for (i = 0; i < (data * 1000); i += 400) {
+	case ETHTOOL_ID_ON:
 		hw->mac.ops.led_on(hw, IXGBE_LED_ON);
-		msleep_interruptible(200);
+		break;
+
+	case ETHTOOL_ID_OFF:
 		hw->mac.ops.led_off(hw, IXGBE_LED_ON);
-		msleep_interruptible(200);
-	}
+		break;
 
-	/* Restore LED settings */
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, led_reg);
+	case ETHTOOL_ID_INACTIVE:
+		/* Restore LED settings */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg);
+		break;
+	}
 
 	return 0;
 }
@@ -2230,8 +2258,13 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 	need_reset = (data & ETH_FLAG_RXVLAN) !=
 		     (netdev->features & NETIF_F_HW_VLAN_RX);
 
+	if ((data & ETH_FLAG_RXHASH) &&
+	    !(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
+		return -EOPNOTSUPP;
+
 	rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_LRO | ETH_FLAG_NTUPLE |
-					ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN);
+				  ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN |
+				  ETH_FLAG_RXHASH);
 	if (rc)
 		return rc;
 
@@ -2465,7 +2498,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.set_tso                = ixgbe_set_tso,
 	.self_test              = ixgbe_diag_test,
 	.get_strings            = ixgbe_get_strings,
-	.phys_id                = ixgbe_phys_id,
+	.set_phys_id            = ixgbe_set_phys_id,
 	.get_sset_count         = ixgbe_get_sset_count,
 	.get_ethtool_stats      = ixgbe_get_ethtool_stats,
 	.get_coalesce           = ixgbe_get_coalesce,
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index dba7d77588e..05920726e82 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -416,8 +416,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 	if (!ddp->udl)
 		goto ddp_out;
 
-	ddp->err = (fcerr | fceofe);
-	if (ddp->err)
+	if (fcerr | fceofe)
 		goto ddp_out;
 
 	fcstat = (sterr & IXGBE_RXDADV_STAT_FCSTAT);
@@ -428,6 +427,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 		if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) {
 			pci_unmap_sg(adapter->pdev, ddp->sgl,
 				     ddp->sgc, DMA_FROM_DEVICE);
+			ddp->err = (fcerr | fceofe);
 			ddp->sgl = NULL;
 			ddp->sgc = 0;
 		}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index f17e4a7ee73..fa01b0b03b7 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -51,8 +51,12 @@
 char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
 			      "Intel(R) 10 Gigabit PCI Express Network Driver";
-
-#define DRV_VERSION "3.2.9-k2"
+#define MAJ 3
+#define MIN 3
+#define BUILD 8
+#define KFIX 2
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+	__stringify(BUILD) "-k" __stringify(KFIX)
 const char ixgbe_driver_version[] = DRV_VERSION;
 static const char ixgbe_copyright[] =
 				"Copyright (c) 1999-2011 Intel Corporation.";
@@ -120,6 +124,10 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T),
 	 board_X540 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2),
+	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS),
+	 board_82599 },
 
 	/* required last entry */
 	{0, }
@@ -185,6 +193,22 @@ static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 	adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
 }
 
+static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter)
+{
+	if (!test_bit(__IXGBE_DOWN, &adapter->state) &&
+	    !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state))
+		schedule_work(&adapter->service_task);
+}
+
+static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter)
+{
+	BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state));
+
+	/* flush memory to make sure state is correct before next watchog */
+	smp_mb__before_clear_bit();
+	clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
+}
+
 struct ixgbe_reg_info {
 	u32 ofs;
 	char *name;
@@ -644,7 +668,7 @@ void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring,
  * @adapter: driver private struct
  * @index: reg idx of queue to query (0-127)
  *
- * Helper function to determine the traffic index for a paticular
+ * Helper function to determine the traffic index for a particular
  * register index.
  *
  * Returns : a tc index for use in range 0-7, or 0-3
@@ -811,7 +835,19 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring)
 #define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \
 	MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */
 
-static void ixgbe_tx_timeout(struct net_device *netdev);
+/**
+ * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout
+ * @adapter: driver private struct
+ **/
+static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter)
+{
+
+	/* Do the reset outside of interrupt context */
+	if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+		adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+		ixgbe_service_event_schedule(adapter);
+	}
+}
 
 /**
  * ixgbe_clean_tx_irq - Reclaim resources after transmit completes
@@ -893,7 +929,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 			adapter->tx_timeout_count + 1, tx_ring->queue_index);
 
 		/* schedule immediate reset if we believe we hung */
-		ixgbe_tx_timeout(adapter->netdev);
+		ixgbe_tx_timeout_reset(adapter);
 
 		/* the adapter is about to reset, no point in enabling stuff */
 		return true;
@@ -943,8 +979,6 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
 	rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
 	rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
 	rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
-	rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
-		    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
 	IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl);
 }
 
@@ -962,7 +996,6 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
 		txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
 		txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
 		txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
-		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(reg_idx), txctrl);
 		break;
 	case ixgbe_mac_82599EB:
@@ -972,7 +1005,6 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
 		txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
 			   IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
 		txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
-		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx), txctrl);
 		break;
 	default:
@@ -1061,8 +1093,14 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
 
 	return 0;
 }
-
 #endif /* CONFIG_IXGBE_DCA */
+
+static inline void ixgbe_rx_hash(union ixgbe_adv_rx_desc *rx_desc,
+				 struct sk_buff *skb)
+{
+	skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+}
+
 /**
  * ixgbe_receive_skb - Send a completed packet up the stack
  * @adapter: board private structure
@@ -1454,6 +1492,8 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		}
 
 		ixgbe_rx_checksum(adapter, rx_desc, skb);
+		if (adapter->netdev->features & NETIF_F_RXHASH)
+			ixgbe_rx_hash(rx_desc, skb);
 
 		/* probably a little skewed due to removing CRC */
 		total_rx_bytes += skb->len;
@@ -1787,35 +1827,51 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 }
 
 /**
- * ixgbe_check_overtemp_task - worker thread to check over tempurature
- * @work: pointer to work_struct containing our data
+ * ixgbe_check_overtemp_subtask - check for over tempurature
+ * @adapter: pointer to adapter
  **/
-static void ixgbe_check_overtemp_task(struct work_struct *work)
+static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_adapter *adapter = container_of(work,
-						     struct ixgbe_adapter,
-						     check_overtemp_task);
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 eicr = adapter->interrupt_event;
 
-	if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE))
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
 		return;
 
+	if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+	    !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT))
+		return;
+
+	adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+
 	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82599_T3_LOM: {
-		u32 autoneg;
-		bool link_up = false;
+	case IXGBE_DEV_ID_82599_T3_LOM:
+		/*
+		 * Since the warning interrupt is for both ports
+		 * we don't have to check if:
+		 *  - This interrupt wasn't for our port.
+		 *  - We may have missed the interrupt so always have to
+		 *    check if we  got a LSC
+		 */
+		if (!(eicr & IXGBE_EICR_GPI_SDP0) &&
+		    !(eicr & IXGBE_EICR_LSC))
+			return;
+
+		if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) {
+			u32 autoneg;
+			bool link_up = false;
 
-		if (hw->mac.ops.check_link)
 			hw->mac.ops.check_link(hw, &autoneg, &link_up, false);
 
-		if (((eicr & IXGBE_EICR_GPI_SDP0) && (!link_up)) ||
-		    (eicr & IXGBE_EICR_LSC))
-			/* Check if this is due to overtemp */
-			if (hw->phy.ops.check_overtemp(hw) == IXGBE_ERR_OVERTEMP)
-				break;
-		return;
-	}
+			if (link_up)
+				return;
+		}
+
+		/* Check if this is not due to overtemp */
+		if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP)
+			return;
+
+		break;
 	default:
 		if (!(eicr & IXGBE_EICR_GPI_SDP0))
 			return;
@@ -1825,8 +1881,8 @@ static void ixgbe_check_overtemp_task(struct work_struct *work)
 	       "Network adapter has been stopped because it has over heated. "
 	       "Restart the computer. If the problem persists, "
 	       "power off the system and replace the adapter\n");
-	/* write to clear the interrupt */
-	IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0);
+
+	adapter->interrupt_event = 0;
 }
 
 static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
@@ -1848,15 +1904,19 @@ static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr)
 	if (eicr & IXGBE_EICR_GPI_SDP2) {
 		/* Clear the interrupt */
 		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
-		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			schedule_work(&adapter->sfp_config_module_task);
+		if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+			adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+			ixgbe_service_event_schedule(adapter);
+		}
 	}
 
 	if (eicr & IXGBE_EICR_GPI_SDP1) {
 		/* Clear the interrupt */
 		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
-		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			schedule_work(&adapter->multispeed_fiber_task);
+		if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+			adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+			ixgbe_service_event_schedule(adapter);
+		}
 	}
 }
 
@@ -1870,7 +1930,7 @@ static void ixgbe_check_lsc(struct ixgbe_adapter *adapter)
 	if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
 		IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
 		IXGBE_WRITE_FLUSH(hw);
-		schedule_work(&adapter->watchdog_task);
+		ixgbe_service_event_schedule(adapter);
 	}
 }
 
@@ -1898,26 +1958,32 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 
 	switch (hw->mac.type) {
 	case ixgbe_mac_82599EB:
-		ixgbe_check_sfp_event(adapter, eicr);
-		if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
-		    ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
-			adapter->interrupt_event = eicr;
-			schedule_work(&adapter->check_overtemp_task);
-		}
-		/* now fallthrough to handle Flow Director */
 	case ixgbe_mac_X540:
 		/* Handle Flow Director Full threshold interrupt */
 		if (eicr & IXGBE_EICR_FLOW_DIR) {
+			int reinit_count = 0;
 			int i;
-			IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_FLOW_DIR);
-			/* Disable transmits before FDIR Re-initialization */
-			netif_tx_stop_all_queues(netdev);
 			for (i = 0; i < adapter->num_tx_queues; i++) {
-				struct ixgbe_ring *tx_ring =
-							    adapter->tx_ring[i];
+				struct ixgbe_ring *ring = adapter->tx_ring[i];
 				if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE,
-						       &tx_ring->state))
-					schedule_work(&adapter->fdir_reinit_task);
+						       &ring->state))
+					reinit_count++;
+			}
+			if (reinit_count) {
+				/* no more flow director interrupts until after init */
+				IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR);
+				eicr &= ~IXGBE_EICR_FLOW_DIR;
+				adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
+				ixgbe_service_event_schedule(adapter);
+			}
+		}
+		ixgbe_check_sfp_event(adapter, eicr);
+		if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+		    ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
+			if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+				adapter->interrupt_event = eicr;
+				adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+				ixgbe_service_event_schedule(adapter);
 			}
 		}
 		break;
@@ -1927,8 +1993,10 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 
 	ixgbe_check_fan_failure(adapter, eicr);
 
+	/* re-enable the original interrupt state, no lsc, no queues */
 	if (!test_bit(__IXGBE_DOWN, &adapter->state))
-		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, eicr &
+		                ~(IXGBE_EIMS_LSC | IXGBE_EIMS_RTX_QUEUE));
 
 	return IRQ_HANDLED;
 }
@@ -2513,8 +2581,11 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 		ixgbe_check_sfp_event(adapter, eicr);
 		if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
 		    ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
-			adapter->interrupt_event = eicr;
-			schedule_work(&adapter->check_overtemp_task);
+			if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+				adapter->interrupt_event = eicr;
+				adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+				ixgbe_service_event_schedule(adapter);
+			}
 		}
 		break;
 	default:
@@ -2731,7 +2802,7 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
 
 	/* poll to verify queue is enabled */
 	do {
-		msleep(1);
+		usleep_range(1000, 2000);
 		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
 	} while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE));
 	if (!wait_loop)
@@ -3023,7 +3094,7 @@ static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
 		return;
 
 	do {
-		msleep(1);
+		usleep_range(1000, 2000);
 		rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
 	} while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE));
 
@@ -3178,7 +3249,9 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
 	/* enable Tx loopback for VF/PF communication */
 	IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
 	/* Enable MAC Anti-Spoofing */
-	hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0),
+	hw->mac.ops.set_mac_anti_spoofing(hw,
+					  (adapter->antispoofing_enabled =
+					   (adapter->num_vfs != 0)),
 					  adapter->num_vfs);
 }
 
@@ -3487,7 +3560,7 @@ static int ixgbe_write_uc_addr_list(struct net_device *netdev)
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 	unsigned int vfn = adapter->num_vfs;
-	unsigned int rar_entries = hw->mac.num_rar_entries - (vfn + 1);
+	unsigned int rar_entries = IXGBE_MAX_PF_MACVLANS;
 	int count = 0;
 
 	/* return ENOMEM indicating insufficient memory for addresses */
@@ -3556,7 +3629,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 		} else {
 			/*
 			 * Write addresses to the MTA, if the attempt fails
-			 * then we should just turn on promiscous mode so
+			 * then we should just turn on promiscuous mode so
 			 * that we can at least receive multicast traffic
 			 */
 			hw->mac.ops.update_mc_addr_list(hw, netdev);
@@ -3567,7 +3640,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 		/*
 		 * Write addresses to available RAR registers, if there is not
 		 * sufficient space to store all the addresses then enable
-		 * unicast promiscous mode
+		 * unicast promiscuous mode
 		 */
 		count = ixgbe_write_uc_addr_list(netdev);
 		if (count < 0) {
@@ -3760,31 +3833,16 @@ static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw)
  **/
 static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_hw *hw = &adapter->hw;
+	/*
+	 * We are assuming the worst case scenerio here, and that
+	 * is that an SFP was inserted/removed after the reset
+	 * but before SFP detection was enabled.  As such the best
+	 * solution is to just start searching as soon as we start
+	 */
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+		adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
 
-		if (hw->phy.multispeed_fiber) {
-			/*
-			 * In multispeed fiber setups, the device may not have
-			 * had a physical connection when the driver loaded.
-			 * If that's the case, the initial link configuration
-			 * couldn't get the MAC into 10G or 1G mode, so we'll
-			 * never have a link status change interrupt fire.
-			 * We need to try and force an autonegotiation
-			 * session, then bring up link.
-			 */
-			if (hw->mac.ops.setup_sfp)
-				hw->mac.ops.setup_sfp(hw);
-			if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
-				schedule_work(&adapter->multispeed_fiber_task);
-		} else {
-			/*
-			 * Direct Attach Cu and non-multispeed fiber modules
-			 * still need to be configured properly prior to
-			 * attempting link.
-			 */
-			if (!(adapter->flags & IXGBE_FLAG_IN_SFP_MOD_TASK))
-				schedule_work(&adapter->sfp_config_module_task);
-		}
+	adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
 }
 
 /**
@@ -3860,9 +3918,10 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)
 	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
 		gpie |= IXGBE_SDP1_GPIEN;
 
-	if (hw->mac.type == ixgbe_mac_82599EB)
+	if (hw->mac.type == ixgbe_mac_82599EB) {
 		gpie |= IXGBE_SDP1_GPIEN;
 		gpie |= IXGBE_SDP2_GPIEN;
+	}
 
 	IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
 }
@@ -3913,17 +3972,6 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 			e_crit(drv, "Fan has stopped, replace the adapter\n");
 	}
 
-	/*
-	 * For hot-pluggable SFP+ devices, a new SFP+ module may have
-	 * arrived before interrupts were enabled but after probe.  Such
-	 * devices wouldn't have their type identified yet. We need to
-	 * kick off the SFP+ module setup first, then try to bring up link.
-	 * If we're not hot-pluggable SFP+, we just need to configure link
-	 * and bring it up.
-	 */
-	if (hw->phy.type == ixgbe_phy_none)
-		schedule_work(&adapter->sfp_config_module_task);
-
 	/* enable transmits */
 	netif_tx_start_all_queues(adapter->netdev);
 
@@ -3931,7 +3979,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	 * link up interrupt but shouldn't be a problem */
 	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
 	adapter->link_check_timeout = jiffies;
-	mod_timer(&adapter->watchdog_timer, jiffies);
+	mod_timer(&adapter->service_timer, jiffies);
 
 	/* Set PF Reset Done bit so PF/VF Mail Ops can work */
 	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
@@ -3944,8 +3992,11 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 void ixgbe_reinit_locked(struct ixgbe_adapter *adapter)
 {
 	WARN_ON(in_interrupt());
+	/* put off any impending NetWatchDogTimeout */
+	adapter->netdev->trans_start = jiffies;
+
 	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
-		msleep(1);
+		usleep_range(1000, 2000);
 	ixgbe_down(adapter);
 	/*
 	 * If SR-IOV enabled then wait a bit before bringing the adapter
@@ -3972,10 +4023,20 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	int err;
 
+	/* lock SFP init bit to prevent race conditions with the watchdog */
+	while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+		usleep_range(1000, 2000);
+
+	/* clear all SFP and link config related flags while holding SFP_INIT */
+	adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP |
+			     IXGBE_FLAG2_SFP_NEEDS_RESET);
+	adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+
 	err = hw->mac.ops.init_hw(hw);
 	switch (err) {
 	case 0:
 	case IXGBE_ERR_SFP_NOT_PRESENT:
+	case IXGBE_ERR_SFP_NOT_SUPPORTED:
 		break;
 	case IXGBE_ERR_MASTER_REQUESTS_PENDING:
 		e_dev_err("master disable timed out\n");
@@ -3993,6 +4054,8 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
 		e_dev_err("Hardware Error: %d\n", err);
 	}
 
+	clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+
 	/* reprogram the RAR[0] in case user changed it. */
 	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
 			    IXGBE_RAH_AV);
@@ -4121,26 +4184,12 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 rxctrl;
-	u32 txdctl;
 	int i;
 	int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
 
 	/* signal that we are down to the interrupt handler */
 	set_bit(__IXGBE_DOWN, &adapter->state);
 
-	/* disable receive for all VFs and wait one second */
-	if (adapter->num_vfs) {
-		/* ping all the active vfs to let them know we are going down */
-		ixgbe_ping_all_vfs(adapter);
-
-		/* Disable all VFTE/VFRE TX/RX */
-		ixgbe_disable_tx_rx(adapter);
-
-		/* Mark all the VFs as inactive */
-		for (i = 0 ; i < adapter->num_vfs; i++)
-			adapter->vfinfo[i].clear_to_send = 0;
-	}
-
 	/* disable receives */
 	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
@@ -4150,15 +4199,11 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 		/* this call also flushes the previous write */
 		ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
 
-	msleep(10);
+	usleep_range(10000, 20000);
 
 	netif_tx_stop_all_queues(netdev);
 
-	clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
-	del_timer_sync(&adapter->sfp_timer);
-	del_timer_sync(&adapter->watchdog_timer);
-	cancel_work_sync(&adapter->watchdog_task);
-
+	/* call carrier off first to avoid false dev_watchdog timeouts */
 	netif_carrier_off(netdev);
 	netif_tx_disable(netdev);
 
@@ -4166,6 +4211,25 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 	ixgbe_napi_disable_all(adapter);
 
+	adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT |
+			     IXGBE_FLAG2_RESET_REQUESTED);
+	adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+
+	del_timer_sync(&adapter->service_timer);
+
+	/* disable receive for all VFs and wait one second */
+	if (adapter->num_vfs) {
+		/* ping all the active vfs to let them know we are going down */
+		ixgbe_ping_all_vfs(adapter);
+
+		/* Disable all VFTE/VFRE TX/RX */
+		ixgbe_disable_tx_rx(adapter);
+
+		/* Mark all the VFs as inactive */
+		for (i = 0 ; i < adapter->num_vfs; i++)
+			adapter->vfinfo[i].clear_to_send = 0;
+	}
+
 	/* Cleanup the affinity_hint CPU mask memory and callback */
 	for (i = 0; i < num_q_vectors; i++) {
 		struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
@@ -4175,21 +4239,13 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 		free_cpumask_var(q_vector->affinity_mask);
 	}
 
-	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
-	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
-		cancel_work_sync(&adapter->fdir_reinit_task);
-
-	if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
-		cancel_work_sync(&adapter->check_overtemp_task);
-
 	/* disable transmits in the hardware now that interrupts are off */
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		u8 reg_idx = adapter->tx_ring[i]->reg_idx;
-		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
-		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx),
-				(txdctl & ~IXGBE_TXDCTL_ENABLE));
+		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH);
 	}
-	/* Disable the Tx DMA engine on 82599 */
+
+	/* Disable the Tx DMA engine on 82599 and X540 */
 	switch (hw->mac.type) {
 	case ixgbe_mac_82599EB:
 	case ixgbe_mac_X540:
@@ -4201,9 +4257,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 		break;
 	}
 
-	/* clear n-tuple filters that are cached */
-	ethtool_ntuple_flush(netdev);
-
 	if (!pci_channel_offline(adapter->pdev))
 		ixgbe_reset(adapter);
 
@@ -4267,25 +4320,8 @@ static void ixgbe_tx_timeout(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-	adapter->tx_timeout_count++;
-
 	/* Do the reset outside of interrupt context */
-	schedule_work(&adapter->reset_task);
-}
-
-static void ixgbe_reset_task(struct work_struct *work)
-{
-	struct ixgbe_adapter *adapter;
-	adapter = container_of(work, struct ixgbe_adapter, reset_task);
-
-	/* If we're already down or resetting, just bail */
-	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
-	    test_bit(__IXGBE_RESETTING, &adapter->state))
-		return;
-
-	ixgbe_dump(adapter);
-	netdev_err(adapter->netdev, "Reset adapter\n");
-	ixgbe_reinit_locked(adapter);
+	ixgbe_tx_timeout_reset(adapter);
 }
 
 /**
@@ -4443,7 +4479,7 @@ static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
 }
 
 /*
- * ixgbe_set_num_queues: Allocate queues for device, feature dependant
+ * ixgbe_set_num_queues: Allocate queues for device, feature dependent
  * @adapter: board private structure to initialize
  *
  * This is the top level queue allocation routine.  The order here is very
@@ -4567,8 +4603,8 @@ static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter)
 #ifdef CONFIG_IXGBE_DCB
 
 /* ixgbe_get_first_reg_idx - Return first register index associated with ring */
-void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
-			     unsigned int *tx, unsigned int *rx)
+static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
+				    unsigned int *tx, unsigned int *rx)
 {
 	struct net_device *dev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
@@ -5100,11 +5136,6 @@ err_set_interrupt:
 	return err;
 }
 
-static void ring_free_rcu(struct rcu_head *head)
-{
-	kfree(container_of(head, struct ixgbe_ring, rcu));
-}
-
 /**
  * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
  * @adapter: board private structure to clear interrupt scheme on
@@ -5126,7 +5157,7 @@ void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
 		/* ixgbe_get_stats64() might access this ring, we must wait
 		 * a grace period before freeing it.
 		 */
-		call_rcu(&ring->rcu, ring_free_rcu);
+		kfree_rcu(ring, rcu);
 		adapter->rx_ring[i] = NULL;
 	}
 
@@ -5138,57 +5169,6 @@ void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
 }
 
 /**
- * ixgbe_sfp_timer - worker thread to find a missing module
- * @data: pointer to our adapter struct
- **/
-static void ixgbe_sfp_timer(unsigned long data)
-{
-	struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
-
-	/*
-	 * Do the sfp_timer outside of interrupt context due to the
-	 * delays that sfp+ detection requires
-	 */
-	schedule_work(&adapter->sfp_task);
-}
-
-/**
- * ixgbe_sfp_task - worker thread to find a missing module
- * @work: pointer to work_struct containing our data
- **/
-static void ixgbe_sfp_task(struct work_struct *work)
-{
-	struct ixgbe_adapter *adapter = container_of(work,
-						     struct ixgbe_adapter,
-						     sfp_task);
-	struct ixgbe_hw *hw = &adapter->hw;
-
-	if ((hw->phy.type == ixgbe_phy_nl) &&
-	    (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
-		s32 ret = hw->phy.ops.identify_sfp(hw);
-		if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
-			goto reschedule;
-		ret = hw->phy.ops.reset(hw);
-		if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-			e_dev_err("failed to initialize because an unsupported "
-				  "SFP+ module type was detected.\n");
-			e_dev_err("Reload the driver after installing a "
-				  "supported module.\n");
-			unregister_netdev(adapter->netdev);
-		} else {
-			e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
-		}
-		/* don't need this routine any more */
-		clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
-	}
-	return;
-reschedule:
-	if (test_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state))
-		mod_timer(&adapter->sfp_timer,
-			  round_jiffies(jiffies + (2 * HZ)));
-}
-
-/**
  * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
  * @adapter: board private structure to initialize
  *
@@ -5904,8 +5884,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 		hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
 		hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH);
 		break;
-	case ixgbe_mac_82599EB:
 	case ixgbe_mac_X540:
+		/* OS2BMC stats are X540 only*/
+		hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC);
+		hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC);
+		hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC);
+		hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC);
+	case ixgbe_mac_82599EB:
 		hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
 		IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
 		hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
@@ -5979,23 +5964,66 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 }
 
 /**
- * ixgbe_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
+ * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table
+ * @adapter - pointer to the device adapter structure
  **/
-static void ixgbe_watchdog(unsigned long data)
+static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
 	struct ixgbe_hw *hw = &adapter->hw;
-	u64 eics = 0;
 	int i;
 
-	/*
-	 *  Do the watchdog outside of interrupt context due to the lovely
-	 * delays that some of the newer hardware requires
-	 */
+	if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT))
+		return;
+
+	adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
 
+	/* if interface is down do nothing */
 	if (test_bit(__IXGBE_DOWN, &adapter->state))
-		goto watchdog_short_circuit;
+		return;
+
+	/* do nothing if we are not using signature filters */
+	if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE))
+		return;
+
+	adapter->fdir_overflow++;
+
+	if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			set_bit(__IXGBE_TX_FDIR_INIT_DONE,
+			        &(adapter->tx_ring[i]->state));
+		/* re-enable flow director interrupts */
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR);
+	} else {
+		e_err(probe, "failed to finish FDIR re-initialization, "
+		      "ignored adding FDIR ATR filters\n");
+	}
+}
+
+/**
+ * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts
+ * @adapter - pointer to the device adapter structure
+ *
+ * This function serves two purposes.  First it strobes the interrupt lines
+ * in order to make certain interrupts are occuring.  Secondly it sets the
+ * bits needed to check for TX hangs.  As a result we should immediately
+ * determine if a hang has occured.
+ */
+static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u64 eics = 0;
+	int i;
+
+	/* If we're down or resetting, just bail */
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return;
+
+	/* Force detection of hung controller */
+	if (netif_carrier_ok(adapter->netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			set_check_for_tx_hang(adapter->tx_ring[i]);
+	}
 
 	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
 		/*
@@ -6005,108 +6033,172 @@ static void ixgbe_watchdog(unsigned long data)
 		 */
 		IXGBE_WRITE_REG(hw, IXGBE_EICS,
 			(IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
-		goto watchdog_reschedule;
-	}
-
-	/* get one bit for every active tx/rx interrupt vector */
-	for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
-		struct ixgbe_q_vector *qv = adapter->q_vector[i];
-		if (qv->rxr_count || qv->txr_count)
-			eics |= ((u64)1 << i);
+	} else {
+		/* get one bit for every active tx/rx interrupt vector */
+		for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
+			struct ixgbe_q_vector *qv = adapter->q_vector[i];
+			if (qv->rxr_count || qv->txr_count)
+				eics |= ((u64)1 << i);
+		}
 	}
 
-	/* Cause software interrupt to ensure rx rings are cleaned */
+	/* Cause software interrupt to ensure rings are cleaned */
 	ixgbe_irq_rearm_queues(adapter, eics);
 
-watchdog_reschedule:
-	/* Reset the timer */
-	mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
-
-watchdog_short_circuit:
-	schedule_work(&adapter->watchdog_task);
 }
 
 /**
- * ixgbe_multispeed_fiber_task - worker thread to configure multispeed fiber
- * @work: pointer to work_struct containing our data
+ * ixgbe_watchdog_update_link - update the link status
+ * @adapter - pointer to the device adapter structure
+ * @link_speed - pointer to a u32 to store the link_speed
  **/
-static void ixgbe_multispeed_fiber_task(struct work_struct *work)
+static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_adapter *adapter = container_of(work,
-						     struct ixgbe_adapter,
-						     multispeed_fiber_task);
 	struct ixgbe_hw *hw = &adapter->hw;
-	u32 autoneg;
-	bool negotiation;
+	u32 link_speed = adapter->link_speed;
+	bool link_up = adapter->link_up;
+	int i;
 
-	adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
-	autoneg = hw->phy.autoneg_advertised;
-	if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
-		hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
-	hw->mac.autotry_restart = false;
-	if (hw->mac.ops.setup_link)
-		hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
-	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
-	adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK;
+	if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE))
+		return;
+
+	if (hw->mac.ops.check_link) {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	} else {
+		/* always assume link is up, if no check link function */
+		link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+		link_up = true;
+	}
+	if (link_up) {
+		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+			for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+				hw->mac.ops.fc_enable(hw, i);
+		} else {
+			hw->mac.ops.fc_enable(hw, 0);
+		}
+	}
+
+	if (link_up ||
+	    time_after(jiffies, (adapter->link_check_timeout +
+				 IXGBE_TRY_LINK_TIMEOUT))) {
+		adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
+		IXGBE_WRITE_FLUSH(hw);
+	}
+
+	adapter->link_up = link_up;
+	adapter->link_speed = link_speed;
 }
 
 /**
- * ixgbe_sfp_config_module_task - worker thread to configure a new SFP+ module
- * @work: pointer to work_struct containing our data
+ * ixgbe_watchdog_link_is_up - update netif_carrier status and
+ *                             print link up message
+ * @adapter - pointer to the device adapter structure
  **/
-static void ixgbe_sfp_config_module_task(struct work_struct *work)
+static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_adapter *adapter = container_of(work,
-						     struct ixgbe_adapter,
-						     sfp_config_module_task);
+	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
-	u32 err;
+	u32 link_speed = adapter->link_speed;
+	bool flow_rx, flow_tx;
 
-	adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+	/* only continue if link was previously down */
+	if (netif_carrier_ok(netdev))
+		return;
 
-	/* Time for electrical oscillations to settle down */
-	msleep(100);
-	err = hw->phy.ops.identify_sfp(hw);
+	adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
 
-	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		e_dev_err("failed to initialize because an unsupported SFP+ "
-			  "module type was detected.\n");
-		e_dev_err("Reload the driver after installing a supported "
-			  "module.\n");
-		unregister_netdev(adapter->netdev);
-		return;
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB: {
+		u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+		u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
+		flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
+		flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
+	}
+		break;
+	case ixgbe_mac_X540:
+	case ixgbe_mac_82599EB: {
+		u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+		u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+		flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
+		flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
 	}
-	if (hw->mac.ops.setup_sfp)
-		hw->mac.ops.setup_sfp(hw);
+		break;
+	default:
+		flow_tx = false;
+		flow_rx = false;
+		break;
+	}
+	e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
+	       (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
+	       "10 Gbps" :
+	       (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
+	       "1 Gbps" :
+	       (link_speed == IXGBE_LINK_SPEED_100_FULL ?
+	       "100 Mbps" :
+	       "unknown speed"))),
+	       ((flow_rx && flow_tx) ? "RX/TX" :
+	       (flow_rx ? "RX" :
+	       (flow_tx ? "TX" : "None"))));
 
-	if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
-		/* This will also work for DA Twinax connections */
-		schedule_work(&adapter->multispeed_fiber_task);
-	adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK;
+	netif_carrier_on(netdev);
+#ifdef HAVE_IPLINK_VF_CONFIG
+	ixgbe_check_vf_rate_limit(adapter);
+#endif /* HAVE_IPLINK_VF_CONFIG */
 }
 
 /**
- * ixgbe_fdir_reinit_task - worker thread to reinit FDIR filter table
- * @work: pointer to work_struct containing our data
+ * ixgbe_watchdog_link_is_down - update netif_carrier status and
+ *                               print link down message
+ * @adapter - pointer to the adapter structure
  **/
-static void ixgbe_fdir_reinit_task(struct work_struct *work)
+static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter* adapter)
 {
-	struct ixgbe_adapter *adapter = container_of(work,
-						     struct ixgbe_adapter,
-						     fdir_reinit_task);
+	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
+
+	adapter->link_up = false;
+	adapter->link_speed = 0;
+
+	/* only continue if link was up previously */
+	if (!netif_carrier_ok(netdev))
+		return;
+
+	/* poll for SFP+ cable when link is down */
+	if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB)
+		adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+	e_info(drv, "NIC Link is Down\n");
+	netif_carrier_off(netdev);
+}
+
+/**
+ * ixgbe_watchdog_flush_tx - flush queues on link down
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter)
+{
 	int i;
+	int some_tx_pending = 0;
 
-	if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			set_bit(__IXGBE_TX_FDIR_INIT_DONE,
-				&(adapter->tx_ring[i]->state));
-	} else {
-		e_err(probe, "failed to finish FDIR re-initialization, "
-		      "ignored adding FDIR ATR filters\n");
+	if (!netif_carrier_ok(adapter->netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+			if (tx_ring->next_to_use != tx_ring->next_to_clean) {
+				some_tx_pending = 1;
+				break;
+			}
+		}
+
+		if (some_tx_pending) {
+			/* We've lost link, so the controller stops DMA,
+			 * but we've got queued Tx work that's never going
+			 * to get done, so reset controller to flush Tx.
+			 * (Do the reset outside of interrupt context).
+			 */
+			adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+		}
 	}
-	/* Done FDIR Re-initialization, enable transmits */
-	netif_tx_start_all_queues(adapter->netdev);
 }
 
 static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
@@ -6129,133 +6221,186 @@ static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
 	e_warn(drv, "%d Spoofed packets detected\n", ssvpc);
 }
 
-static DEFINE_MUTEX(ixgbe_watchdog_lock);
+/**
+ * ixgbe_watchdog_subtask - check and bring link up
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter)
+{
+	/* if interface is down do nothing */
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		return;
+
+	ixgbe_watchdog_update_link(adapter);
+
+	if (adapter->link_up)
+		ixgbe_watchdog_link_is_up(adapter);
+	else
+		ixgbe_watchdog_link_is_down(adapter);
+
+	ixgbe_spoof_check(adapter);
+	ixgbe_update_stats(adapter);
+
+	ixgbe_watchdog_flush_tx(adapter);
+}
 
 /**
- * ixgbe_watchdog_task - worker thread to bring link up
- * @work: pointer to work_struct containing our data
+ * ixgbe_sfp_detection_subtask - poll for SFP+ cable
+ * @adapter - the ixgbe adapter structure
  **/
-static void ixgbe_watchdog_task(struct work_struct *work)
+static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_adapter *adapter = container_of(work,
-						     struct ixgbe_adapter,
-						     watchdog_task);
-	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
-	u32 link_speed;
-	bool link_up;
-	int i;
-	struct ixgbe_ring *tx_ring;
-	int some_tx_pending = 0;
+	s32 err;
 
-	mutex_lock(&ixgbe_watchdog_lock);
+	/* not searching for SFP so there is nothing to do here */
+	if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) &&
+	    !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
+		return;
 
-	link_up = adapter->link_up;
-	link_speed = adapter->link_speed;
+	/* someone else is in init, wait until next service event */
+	if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+		return;
 
-	if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
-		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
-		if (link_up) {
-#ifdef CONFIG_DCB
-			if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-				for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
-					hw->mac.ops.fc_enable(hw, i);
-			} else {
-				hw->mac.ops.fc_enable(hw, 0);
-			}
-#else
-			hw->mac.ops.fc_enable(hw, 0);
-#endif
-		}
+	err = hw->phy.ops.identify_sfp(hw);
+	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto sfp_out;
 
-		if (link_up ||
-		    time_after(jiffies, (adapter->link_check_timeout +
-					 IXGBE_TRY_LINK_TIMEOUT))) {
-			adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
-			IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
-		}
-		adapter->link_up = link_up;
-		adapter->link_speed = link_speed;
+	if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
+		/* If no cable is present, then we need to reset
+		 * the next time we find a good cable. */
+		adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
 	}
 
-	if (link_up) {
-		if (!netif_carrier_ok(netdev)) {
-			bool flow_rx, flow_tx;
-
-			switch (hw->mac.type) {
-			case ixgbe_mac_82598EB: {
-				u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
-				u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
-				flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
-				flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
-			}
-				break;
-			case ixgbe_mac_82599EB:
-			case ixgbe_mac_X540: {
-				u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
-				u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
-				flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
-				flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
-			}
-				break;
-			default:
-				flow_tx = false;
-				flow_rx = false;
-				break;
-			}
+	/* exit on error */
+	if (err)
+		goto sfp_out;
 
-			e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
-			       (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
-			       "10 Gbps" :
-			       (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
-			       "1 Gbps" :
-			       (link_speed == IXGBE_LINK_SPEED_100_FULL ?
-			       "100 Mbps" :
-			       "unknown speed"))),
-			       ((flow_rx && flow_tx) ? "RX/TX" :
-			       (flow_rx ? "RX" :
-			       (flow_tx ? "TX" : "None"))));
-
-			netif_carrier_on(netdev);
-			ixgbe_check_vf_rate_limit(adapter);
-		} else {
-			/* Force detection of hung controller */
-			for (i = 0; i < adapter->num_tx_queues; i++) {
-				tx_ring = adapter->tx_ring[i];
-				set_check_for_tx_hang(tx_ring);
-			}
-		}
-	} else {
-		adapter->link_up = false;
-		adapter->link_speed = 0;
-		if (netif_carrier_ok(netdev)) {
-			e_info(drv, "NIC Link is Down\n");
-			netif_carrier_off(netdev);
-		}
-	}
+	/* exit if reset not needed */
+	if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
+		goto sfp_out;
 
-	if (!netif_carrier_ok(netdev)) {
-		for (i = 0; i < adapter->num_tx_queues; i++) {
-			tx_ring = adapter->tx_ring[i];
-			if (tx_ring->next_to_use != tx_ring->next_to_clean) {
-				some_tx_pending = 1;
-				break;
-			}
-		}
+	adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET;
 
-		if (some_tx_pending) {
-			/* We've lost link, so the controller stops DMA,
-			 * but we've got queued Tx work that's never going
-			 * to get done, so reset controller to flush Tx.
-			 * (Do the reset outside of interrupt context).
-			 */
-			 schedule_work(&adapter->reset_task);
-		}
+	/*
+	 * A module may be identified correctly, but the EEPROM may not have
+	 * support for that module.  setup_sfp() will fail in that case, so
+	 * we should not allow that module to load.
+	 */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		err = hw->phy.ops.reset(hw);
+	else
+		err = hw->mac.ops.setup_sfp(hw);
+
+	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto sfp_out;
+
+	adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+	e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
+
+sfp_out:
+	clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+
+	if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) &&
+	    (adapter->netdev->reg_state == NETREG_REGISTERED)) {
+		e_dev_err("failed to initialize because an unsupported "
+			  "SFP+ module type was detected.\n");
+		e_dev_err("Reload the driver after installing a "
+			  "supported module.\n");
+		unregister_netdev(adapter->netdev);
 	}
+}
 
-	ixgbe_spoof_check(adapter);
-	ixgbe_update_stats(adapter);
-	mutex_unlock(&ixgbe_watchdog_lock);
+/**
+ * ixgbe_sfp_link_config_subtask - set up link SFP after module install
+ * @adapter - the ixgbe adapter structure
+ **/
+static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 autoneg;
+	bool negotiation;
+
+	if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG))
+		return;
+
+	/* someone else is in init, wait until next service event */
+	if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+		return;
+
+	adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+
+	autoneg = hw->phy.autoneg_advertised;
+	if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
+		hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
+	hw->mac.autotry_restart = false;
+	if (hw->mac.ops.setup_link)
+		hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
+
+	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+	adapter->link_check_timeout = jiffies;
+	clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+}
+
+/**
+ * ixgbe_service_timer - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void ixgbe_service_timer(unsigned long data)
+{
+	struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
+	unsigned long next_event_offset;
+
+	/* poll faster when waiting for link */
+	if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)
+		next_event_offset = HZ / 10;
+	else
+		next_event_offset = HZ * 2;
+
+	/* Reset the timer */
+	mod_timer(&adapter->service_timer, next_event_offset + jiffies);
+
+	ixgbe_service_event_schedule(adapter);
+}
+
+static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter)
+{
+	if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED))
+		return;
+
+	adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED;
+
+	/* If we're already down or resetting, just bail */
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return;
+
+	ixgbe_dump(adapter);
+	netdev_err(adapter->netdev, "Reset adapter\n");
+	adapter->tx_timeout_count++;
+
+	ixgbe_reinit_locked(adapter);
+}
+
+/**
+ * ixgbe_service_task - manages and runs subtasks
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbe_service_task(struct work_struct *work)
+{
+	struct ixgbe_adapter *adapter = container_of(work,
+						     struct ixgbe_adapter,
+						     service_task);
+
+	ixgbe_reset_subtask(adapter);
+	ixgbe_sfp_detection_subtask(adapter);
+	ixgbe_sfp_link_config_subtask(adapter);
+	ixgbe_check_overtemp_subtask(adapter);
+	ixgbe_watchdog_subtask(adapter);
+	ixgbe_fdir_reinit_subtask(adapter);
+	ixgbe_check_hang_subtask(adapter);
+
+	ixgbe_service_event_complete(adapter);
 }
 
 static int ixgbe_tso(struct ixgbe_adapter *adapter,
@@ -7094,6 +7239,8 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 #ifdef CONFIG_PCI_IOV
 	struct ixgbe_hw *hw = &adapter->hw;
 	int err;
+	int num_vf_macvlans, i;
+	struct vf_macvlans *mv_list;
 
 	if (hw->mac.type == ixgbe_mac_82598EB || !max_vfs)
 		return;
@@ -7110,6 +7257,26 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 		e_err(probe, "Failed to enable PCI sriov: %d\n", err);
 		goto err_novfs;
 	}
+
+	num_vf_macvlans = hw->mac.num_rar_entries -
+		(IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
+
+	adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
+					     sizeof(struct vf_macvlans),
+					     GFP_KERNEL);
+	if (mv_list) {
+		/* Initialize list of VF macvlans */
+		INIT_LIST_HEAD(&adapter->vf_mvs.l);
+		for (i = 0; i < num_vf_macvlans; i++) {
+			mv_list->vf = -1;
+			mv_list->free = true;
+			mv_list->rar_entry = hw->mac.num_rar_entries -
+				(i + adapter->num_vfs + 1);
+			list_add(&mv_list->l, &adapter->vf_mvs.l);
+			mv_list++;
+		}
+	}
+
 	/* If call to enable VFs succeeded then allocate memory
 	 * for per VF control structures.
 	 */
@@ -7280,22 +7447,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	hw->phy.mdio.mdio_read = ixgbe_mdio_read;
 	hw->phy.mdio.mdio_write = ixgbe_mdio_write;
 
-	/* set up this timer and work struct before calling get_invariants
-	 * which might start the timer
-	 */
-	init_timer(&adapter->sfp_timer);
-	adapter->sfp_timer.function = ixgbe_sfp_timer;
-	adapter->sfp_timer.data = (unsigned long) adapter;
-
-	INIT_WORK(&adapter->sfp_task, ixgbe_sfp_task);
-
-	/* multispeed fiber has its own tasklet, called from GPI SDP1 context */
-	INIT_WORK(&adapter->multispeed_fiber_task, ixgbe_multispeed_fiber_task);
-
-	/* a new SFP+ module arrival, called from GPI SDP2 context */
-	INIT_WORK(&adapter->sfp_config_module_task,
-		  ixgbe_sfp_config_module_task);
-
 	ii->get_invariants(hw);
 
 	/* setup the private structure */
@@ -7329,17 +7480,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	hw->phy.reset_if_overtemp = false;
 	if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
 	    hw->mac.type == ixgbe_mac_82598EB) {
-		/*
-		 * Start a kernel thread to watch for a module to arrive.
-		 * Only do this for 82598, since 82599 will generate
-		 * interrupts on module arrival.
-		 */
-		set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
-		mod_timer(&adapter->sfp_timer,
-			  round_jiffies(jiffies + (2 * HZ)));
 		err = 0;
 	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		e_dev_err("failed to initialize because an unsupported SFP+ "
+		e_dev_err("failed to load because an unsupported SFP+ "
 			  "module type was detected.\n");
 		e_dev_err("Reload the driver after installing a supported "
 			  "module.\n");
@@ -7361,9 +7504,16 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->features |= NETIF_F_TSO;
 	netdev->features |= NETIF_F_TSO6;
 	netdev->features |= NETIF_F_GRO;
+	netdev->features |= NETIF_F_RXHASH;
 
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		netdev->features |= NETIF_F_SCTP_CSUM;
+		break;
+	default:
+		break;
+	}
 
 	netdev->vlan_features |= NETIF_F_TSO;
 	netdev->vlan_features |= NETIF_F_TSO6;
@@ -7424,17 +7574,19 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	      (hw->mac.type == ixgbe_mac_82599EB))))
 		hw->mac.ops.disable_tx_laser(hw);
 
-	init_timer(&adapter->watchdog_timer);
-	adapter->watchdog_timer.function = ixgbe_watchdog;
-	adapter->watchdog_timer.data = (unsigned long)adapter;
+	setup_timer(&adapter->service_timer, &ixgbe_service_timer,
+	            (unsigned long) adapter);
 
-	INIT_WORK(&adapter->reset_task, ixgbe_reset_task);
-	INIT_WORK(&adapter->watchdog_task, ixgbe_watchdog_task);
+	INIT_WORK(&adapter->service_task, ixgbe_service_task);
+	clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
 
 	err = ixgbe_init_interrupt_scheme(adapter);
 	if (err)
 		goto err_sw_init;
 
+	if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
+		netdev->features &= ~NETIF_F_RXHASH;
+
 	switch (pdev->device) {
 	case IXGBE_DEV_ID_82599_SFP:
 		/* Only this subdevice supports WOL */
@@ -7463,8 +7615,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 	/* print bus type/speed/width info */
 	e_dev_info("(PCI Express:%s:%s) %pM\n",
-		   (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0Gb/s" :
-		    hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5Gb/s" :
+		   (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" :
+		    hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" :
 		    "Unknown"),
 		   (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" :
 		    hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" :
@@ -7513,13 +7665,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
 
-	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
-	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
-		INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task);
-
-	if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
-		INIT_WORK(&adapter->check_overtemp_task,
-			  ixgbe_check_overtemp_task);
 #ifdef CONFIG_IXGBE_DCA
 	if (dca_add_requester(&pdev->dev) == 0) {
 		adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
@@ -7546,11 +7691,7 @@ err_sw_init:
 err_eeprom:
 	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
 		ixgbe_disable_sriov(adapter);
-	clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
-	del_timer_sync(&adapter->sfp_timer);
-	cancel_work_sync(&adapter->sfp_task);
-	cancel_work_sync(&adapter->multispeed_fiber_task);
-	cancel_work_sync(&adapter->sfp_config_module_task);
+	adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
 	iounmap(hw->hw_addr);
 err_ioremap:
 	free_netdev(netdev);
@@ -7578,24 +7719,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	struct net_device *netdev = adapter->netdev;
 
 	set_bit(__IXGBE_DOWN, &adapter->state);
-
-	/*
-	 * The timers may be rescheduled, so explicitly disable them
-	 * from being rescheduled.
-	 */
-	clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
-	del_timer_sync(&adapter->watchdog_timer);
-	del_timer_sync(&adapter->sfp_timer);
-
-	cancel_work_sync(&adapter->watchdog_task);
-	cancel_work_sync(&adapter->sfp_task);
-	cancel_work_sync(&adapter->multispeed_fiber_task);
-	cancel_work_sync(&adapter->sfp_config_module_task);
-	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
-	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
-		cancel_work_sync(&adapter->fdir_reinit_task);
-	if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
-		cancel_work_sync(&adapter->check_overtemp_task);
+	cancel_work_sync(&adapter->service_task);
 
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
diff --git a/drivers/net/ixgbe/ixgbe_mbx.h b/drivers/net/ixgbe/ixgbe_mbx.h
index fe6ea81dc7f..b239bdac38d 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.h
+++ b/drivers/net/ixgbe/ixgbe_mbx.h
@@ -36,9 +36,6 @@
 #define IXGBE_VFMAILBOX             0x002FC
 #define IXGBE_VFMBMEM               0x00200
 
-#define IXGBE_PFMAILBOX(x)          (0x04B00 + (4 * x))
-#define IXGBE_PFMBMEM(vfn)          (0x13000 + (64 * vfn))
-
 #define IXGBE_PFMAILBOX_STS   0x00000001 /* Initiate message send to VF */
 #define IXGBE_PFMAILBOX_ACK   0x00000002 /* Ack message recv'd from VF */
 #define IXGBE_PFMAILBOX_VFU   0x00000004 /* VF owns the mailbox buffer */
@@ -70,6 +67,7 @@
 #define IXGBE_VF_SET_MULTICAST    0x03 /* VF requests PF to set MC addr */
 #define IXGBE_VF_SET_VLAN         0x04 /* VF requests PF to set VLAN */
 #define IXGBE_VF_SET_LPE          0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN      0x06 /* VF requests PF for unicast filter */
 
 /* length of permanent address message returned from PF */
 #define IXGBE_VF_PERMADDR_MSG_LEN 4
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index f72f705f618..735f686c3b3 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -449,7 +449,8 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 				     MDIO_MMD_AN,
 				     &autoneg_reg);
 
-		autoneg_reg &= ~ADVERTISE_100FULL;
+		autoneg_reg &= ~(ADVERTISE_100FULL |
+				 ADVERTISE_100HALF);
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
 			autoneg_reg |= ADVERTISE_100FULL;
 
@@ -656,7 +657,8 @@ s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
 				     MDIO_MMD_AN,
 				     &autoneg_reg);
 
-		autoneg_reg &= ~ADVERTISE_100FULL;
+		autoneg_reg &= ~(ADVERTISE_100FULL |
+				 ADVERTISE_100HALF);
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
 			autoneg_reg |= ADVERTISE_100FULL;
 
@@ -753,7 +755,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 		                     &phy_data);
 		if ((phy_data & MDIO_CTRL1_RESET) == 0)
 			break;
-		msleep(10);
+		usleep_range(10000, 20000);
 	}
 
 	if ((phy_data & MDIO_CTRL1_RESET) != 0) {
@@ -782,7 +784,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 		case IXGBE_DELAY_NL:
 			data_offset++;
 			hw_dbg(hw, "DELAY: %d MS\n", edata);
-			msleep(edata);
+			usleep_range(edata * 1000, edata * 2000);
 			break;
 		case IXGBE_DATA_NL:
 			hw_dbg(hw, "DATA:\n");
@@ -1220,7 +1222,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
 		swfw_mask = IXGBE_GSSR_PHY0_SM;
 
 	do {
-		if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) {
+		if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
 			status = IXGBE_ERR_SWFW_SYNC;
 			goto read_byte_out;
 		}
@@ -1267,7 +1269,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
 		break;
 
 fail:
-		ixgbe_release_swfw_sync(hw, swfw_mask);
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
 		msleep(100);
 		ixgbe_i2c_bus_clear(hw);
 		retry++;
@@ -1278,7 +1280,7 @@ fail:
 
 	} while (retry < max_retry);
 
-	ixgbe_release_swfw_sync(hw, swfw_mask);
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
 
 read_byte_out:
 	return status;
@@ -1306,7 +1308,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
 	else
 		swfw_mask = IXGBE_GSSR_PHY0_SM;
 
-	if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) {
+	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
 		status = IXGBE_ERR_SWFW_SYNC;
 		goto write_byte_out;
 	}
@@ -1350,7 +1352,7 @@ fail:
 			hw_dbg(hw, "I2C byte write error.\n");
 	} while (retry < max_retry);
 
-	ixgbe_release_swfw_sync(hw, swfw_mask);
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
 
 write_byte_out:
 	return status;
@@ -1694,7 +1696,7 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_tn_check_overtemp - Checks if an overtemp occured.
+ *  ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
  *  @hw: pointer to hardware structure
  *
  *  Checks if the LASI temp alarm status was triggered due to overtemp
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
index 6e50d832894..ac99b0458fe 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ixgbe/ixgbe_sriov.c
@@ -82,6 +82,21 @@ static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
 	return 0;
 }
 
+static void ixgbe_restore_vf_macvlans(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct list_head *pos;
+	struct vf_macvlans *entry;
+
+	list_for_each(pos, &adapter->vf_mvs.l) {
+		entry = list_entry(pos, struct vf_macvlans, l);
+		if (entry->free == false)
+			hw->mac.ops.set_rar(hw, entry->rar_entry,
+					    entry->vf_macvlan,
+					    entry->vf, IXGBE_RAH_AV);
+	}
+}
+
 void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
@@ -102,6 +117,9 @@ void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
 			IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
 		}
 	}
+
+	/* Restore any VF macvlans */
+	ixgbe_restore_vf_macvlans(adapter);
 }
 
 static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
@@ -110,7 +128,7 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
 	return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
 }
 
-void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf)
+static void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	int new_mtu = msgbuf[1];
@@ -200,6 +218,61 @@ static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
 	return 0;
 }
 
+static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
+				int vf, int index, unsigned char *mac_addr)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct list_head *pos;
+	struct vf_macvlans *entry;
+
+	if (index <= 1) {
+		list_for_each(pos, &adapter->vf_mvs.l) {
+			entry = list_entry(pos, struct vf_macvlans, l);
+			if (entry->vf == vf) {
+				entry->vf = -1;
+				entry->free = true;
+				entry->is_macvlan = false;
+				hw->mac.ops.clear_rar(hw, entry->rar_entry);
+			}
+		}
+	}
+
+	/*
+	 * If index was zero then we were asked to clear the uc list
+	 * for the VF.  We're done.
+	 */
+	if (!index)
+		return 0;
+
+	entry = NULL;
+
+	list_for_each(pos, &adapter->vf_mvs.l) {
+		entry = list_entry(pos, struct vf_macvlans, l);
+		if (entry->free)
+			break;
+	}
+
+	/*
+	 * If we traversed the entire list and didn't find a free entry
+	 * then we're out of space on the RAR table.  Also entry may
+	 * be NULL because the original memory allocation for the list
+	 * failed, which is not fatal but does mean we can't support
+	 * VF requests for MACVLAN because we couldn't allocate
+	 * memory for the list management required.
+	 */
+	if (!entry || !entry->free)
+		return -ENOSPC;
+
+	entry->free = false;
+	entry->is_macvlan = true;
+	entry->vf = vf;
+	memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
+
+	hw->mac.ops.set_rar(hw, entry->rar_entry, mac_addr, vf, IXGBE_RAH_AV);
+
+	return 0;
+}
+
 int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 {
 	unsigned char vf_mac_addr[6];
@@ -251,12 +324,12 @@ static inline void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 {
 	u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
-	u32 msgbuf[mbx_size];
+	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
 	struct ixgbe_hw *hw = &adapter->hw;
 	s32 retval;
 	int entries;
 	u16 *hash_list;
-	int add, vid;
+	int add, vid, index;
 	u8 *new_mac;
 
 	retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
@@ -345,6 +418,24 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 			retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
 		}
 		break;
+	case IXGBE_VF_SET_MACVLAN:
+		index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
+			IXGBE_VT_MSGINFO_SHIFT;
+		/*
+		 * If the VF is allowed to set MAC filters then turn off
+		 * anti-spoofing to avoid false positives.  An index
+		 * greater than 0 will indicate the VF is setting a
+		 * macvlan MAC filter.
+		 */
+		if (index > 0 && adapter->antispoofing_enabled) {
+			hw->mac.ops.set_mac_anti_spoofing(hw, false,
+							  adapter->num_vfs);
+			hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
+			adapter->antispoofing_enabled = false;
+		}
+		retval = ixgbe_set_vf_macvlan(adapter, vf, index,
+					      (unsigned char *)(&msgbuf[1]));
+		break;
 	default:
 		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
 		retval = IXGBE_ERR_MBX;
@@ -452,7 +543,8 @@ int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
 			goto out;
 		ixgbe_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
 		ixgbe_set_vmolr(hw, vf, false);
-		hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
+		if (adapter->antispoofing_enabled)
+			hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
 		adapter->vfinfo[vf].pf_vlan = vlan;
 		adapter->vfinfo[vf].pf_qos = qos;
 		dev_info(&adapter->pdev->dev,
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 25c1fb7eda0..fa43f2507f4 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -58,9 +58,11 @@
 #define IXGBE_DEV_ID_82599_SFP_FCOE      0x1529
 #define IXGBE_SUBDEV_ID_82599_SFP        0x11A9
 #define IXGBE_DEV_ID_82599_SFP_EM        0x1507
+#define IXGBE_DEV_ID_82599_SFP_SF2       0x154D
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
 #define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
 #define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ  0x000C
+#define IXGBE_DEV_ID_82599_LS            0x154F
 #define IXGBE_DEV_ID_X540T               0x1528
 
 /* General Registers */
@@ -163,6 +165,9 @@
                          (0x0D018 + ((_i - 64) * 0x40)))
 #define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
                           (0x0D028 + ((_i - 64) * 0x40)))
+#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+                          (0x0D02C + ((_i - 64) * 0x40)))
+#define IXGBE_RSCDBU     0x03028
 #define IXGBE_RDDCC      0x02F20
 #define IXGBE_RXMEMWRAP  0x03190
 #define IXGBE_STARCTRL   0x03024
@@ -227,17 +232,23 @@
 #define IXGBE_VLVF(_i)  (0x0F100 + ((_i) * 4))  /* 64 of these (0-63) */
 #define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4))  /* 128 of these (0-127) */
 #define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4))  /* 64 of these (0-63) */
-#define IXGBE_VT_CTL    0x051B0
-#define IXGBE_VFRE(_i)  (0x051E0 + ((_i) * 4))
-#define IXGBE_VFTE(_i)  (0x08110 + ((_i) * 4))
-#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
-#define IXGBE_QDE       0x2F04
-#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
-#define IXGBE_UTA(_i)   (0x0F400 + ((_i) * 4))
-#define IXGBE_VMRCTL(_i)        (0x0F600 + ((_i) * 4))
-#define IXGBE_VMRVLAN(_i)       (0x0F610 + ((_i) * 4))
-#define IXGBE_VMRVM(_i)         (0x0F630 + ((_i) * 4))
-#define IXGBE_L34T_IMIR(_i)      (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_VT_CTL         0x051B0
+#define IXGBE_PFMAILBOX(_i)  (0x04B00 + (4 * (_i))) /* 64 total */
+#define IXGBE_PFMBMEM(_i)    (0x13000 + (64 * (_i))) /* 64 Mailboxes, 16 DW each */
+#define IXGBE_PFMBICR(_i)    (0x00710 + (4 * (_i))) /* 4 total */
+#define IXGBE_PFMBIMR(_i)    (0x00720 + (4 * (_i))) /* 4 total */
+#define IXGBE_VFRE(_i)       (0x051E0 + ((_i) * 4))
+#define IXGBE_VFTE(_i)       (0x08110 + ((_i) * 4))
+#define IXGBE_VMECM(_i)      (0x08790 + ((_i) * 4))
+#define IXGBE_QDE            0x2F04
+#define IXGBE_VMTXSW(_i)     (0x05180 + ((_i) * 4)) /* 2 total */
+#define IXGBE_VMOLR(_i)      (0x0F000 + ((_i) * 4)) /* 64 total */
+#define IXGBE_UTA(_i)        (0x0F400 + ((_i) * 4))
+#define IXGBE_MRCTL(_i)      (0x0F600 + ((_i) * 4))
+#define IXGBE_VMRVLAN(_i)    (0x0F610 + ((_i) * 4))
+#define IXGBE_VMRVM(_i)      (0x0F630 + ((_i) * 4))
+#define IXGBE_L34T_IMIR(_i)  (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_RXFECCERR0         0x051B8
 #define IXGBE_LLITHRESH 0x0EC90
 #define IXGBE_IMIR(_i)  (0x05A80 + ((_i) * 4))  /* 8 of these (0-7) */
 #define IXGBE_IMIREXT(_i)       (0x05AA0 + ((_i) * 4))  /* 8 of these (0-7) */
@@ -364,7 +375,7 @@
 #define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
 #define IXGBE_WUFC_FLX_FILTERS     0x000F0000 /* Mask for 4 flex filters */
 #define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */
-#define IXGBE_WUFC_ALL_FILTERS     0x003F00FF /* Mask for all 6 wakeup filters*/
+#define IXGBE_WUFC_ALL_FILTERS     0x003F00FF /* Mask for all wakeup filters */
 #define IXGBE_WUFC_FLX_OFFSET      16 /* Offset to the Flexible Filters bits */
 
 /* Wake Up Status */
@@ -406,7 +417,6 @@
 #define IXGBE_SECTXSTAT         0x08804
 #define IXGBE_SECTXBUFFAF       0x08808
 #define IXGBE_SECTXMINIFG       0x08810
-#define IXGBE_SECTXSTAT         0x08804
 #define IXGBE_SECRXCTRL         0x08D00
 #define IXGBE_SECRXSTAT         0x08D04
 
@@ -499,21 +509,6 @@
 
 #define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE    0x4
 
-/* HW RSC registers */
-#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
-                          (0x0D02C + ((_i - 64) * 0x40)))
-#define IXGBE_RSCDBU      0x03028
-#define IXGBE_RSCCTL_RSCEN          0x01
-#define IXGBE_RSCCTL_MAXDESC_1      0x00
-#define IXGBE_RSCCTL_MAXDESC_4      0x04
-#define IXGBE_RSCCTL_MAXDESC_8      0x08
-#define IXGBE_RSCCTL_MAXDESC_16     0x0C
-#define IXGBE_RXDADV_RSCCNT_SHIFT     17
-#define IXGBE_GPIE_RSC_DELAY_SHIFT    11
-#define IXGBE_RXDADV_RSCCNT_MASK    0x001E0000
-#define IXGBE_RSCDBU_RSCACKDIS      0x00000080
-#define IXGBE_RDRXCTL_RSCFRSTSIZE   0x003E0000
-
 /* DCB registers */
 #define IXGBE_RTRPCS      0x02430
 #define IXGBE_RTTDCS      0x04900
@@ -522,6 +517,7 @@
 #define IXGBE_RTRUP2TC    0x03020
 #define IXGBE_RTTUP2TC    0x0C800
 #define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TXLLQ(_i)   (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */
 #define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
 #define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
 #define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
@@ -540,7 +536,7 @@
 	(IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT)
 
 
-/* FCoE registers */
+/* FCoE DMA Context Registers */
 #define IXGBE_FCPTRL    0x02410 /* FC User Desc. PTR Low */
 #define IXGBE_FCPTRH    0x02414 /* FC USer Desc. PTR High */
 #define IXGBE_FCBUFF    0x02418 /* FC Buffer Control */
@@ -677,6 +673,10 @@
 #define IXGBE_FCOEDWRC  0x0242C /* Number of FCoE DWords Received */
 #define IXGBE_FCOEPTC   0x08784 /* Number of FCoE Packets Transmitted */
 #define IXGBE_FCOEDWTC  0x08788 /* Number of FCoE DWords Transmitted */
+#define IXGBE_O2BGPTC   0x041C4
+#define IXGBE_O2BSPC    0x087B0
+#define IXGBE_B2OSPC    0x041C0
+#define IXGBE_B2OGPRC   0x02F90
 #define IXGBE_PCRC8ECL  0x0E810
 #define IXGBE_PCRC8ECH  0x0E811
 #define IXGBE_PCRC8ECH_MASK     0x1F
@@ -742,17 +742,10 @@
 #define IXGBE_PBACLR_82599      0x11068
 #define IXGBE_CIAA_82599        0x11088
 #define IXGBE_CIAD_82599        0x1108C
-#define IXGBE_PCIE_DIAG_0_82599 0x11090
-#define IXGBE_PCIE_DIAG_1_82599 0x11094
-#define IXGBE_PCIE_DIAG_2_82599 0x11098
-#define IXGBE_PCIE_DIAG_3_82599 0x1109C
-#define IXGBE_PCIE_DIAG_4_82599 0x110A0
-#define IXGBE_PCIE_DIAG_5_82599 0x110A4
-#define IXGBE_PCIE_DIAG_6_82599 0x110A8
-#define IXGBE_PCIE_DIAG_7_82599 0x110C0
-#define IXGBE_INTRPT_CSR_82599  0x110B0
-#define IXGBE_INTRPT_MASK_82599 0x110B8
+#define IXGBE_PICAUSE           0x110B0
+#define IXGBE_PIENA             0x110B8
 #define IXGBE_CDQ_MBR_82599     0x110B4
+#define IXGBE_PCIESPARE         0x110BC
 #define IXGBE_MISC_REG_82599    0x110F0
 #define IXGBE_ECC_CTRL_0_82599  0x11100
 #define IXGBE_ECC_CTRL_1_82599  0x11104
@@ -785,7 +778,19 @@
 #define IXGBE_SYSTIML    0x08C0C /* System time register Low - RO */
 #define IXGBE_SYSTIMH    0x08C10 /* System time register High - RO */
 #define IXGBE_TIMINCA    0x08C14 /* Increment attributes register - RW */
-#define IXGBE_RXUDP      0x08C1C /* Time Sync Rx UDP Port - RW */
+#define IXGBE_TIMADJL    0x08C18 /* Time Adjustment Offset register Low - RW */
+#define IXGBE_TIMADJH    0x08C1C /* Time Adjustment Offset register High - RW */
+#define IXGBE_TSAUXC     0x08C20 /* TimeSync Auxiliary Control register - RW */
+#define IXGBE_TRGTTIML0  0x08C24 /* Target Time Register 0 Low - RW */
+#define IXGBE_TRGTTIMH0  0x08C28 /* Target Time Register 0 High - RW */
+#define IXGBE_TRGTTIML1  0x08C2C /* Target Time Register 1 Low - RW */
+#define IXGBE_TRGTTIMH1  0x08C30 /* Target Time Register 1 High - RW */
+#define IXGBE_FREQOUT0   0x08C34 /* Frequency Out 0 Control register - RW */
+#define IXGBE_FREQOUT1   0x08C38 /* Frequency Out 1 Control register - RW */
+#define IXGBE_AUXSTMPL0  0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */
+#define IXGBE_AUXSTMPH0  0x08C40 /* Auxiliary Time Stamp 0 register High - RO */
+#define IXGBE_AUXSTMPL1  0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */
+#define IXGBE_AUXSTMPH1  0x08C48 /* Auxiliary Time Stamp 1 register High - RO */
 
 /* Diagnostic Registers */
 #define IXGBE_RDSTATCTL   0x02C20
@@ -829,8 +834,20 @@
 #define IXGBE_TXDATARDPTR(_i)   (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
 #define IXGBE_TXDESCRDPTR(_i)   (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
 #define IXGBE_PCIEECCCTL 0x1106C
+#define IXGBE_RXWRPTR(_i)       (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/
+#define IXGBE_RXUSED(_i)        (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/
+#define IXGBE_RXRDPTR(_i)       (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/
+#define IXGBE_RXRDWRPTR(_i)     (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/
+#define IXGBE_TXWRPTR(_i)       (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/
+#define IXGBE_TXUSED(_i)        (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/
+#define IXGBE_TXRDPTR(_i)       (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/
+#define IXGBE_TXRDWRPTR(_i)     (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/
 #define IXGBE_PCIEECCCTL0 0x11100
 #define IXGBE_PCIEECCCTL1 0x11104
+#define IXGBE_RXDBUECC  0x03F70
+#define IXGBE_TXDBUECC  0x0CF70
+#define IXGBE_RXDBUEST 0x03F74
+#define IXGBE_TXDBUEST 0x0CF74
 #define IXGBE_PBTXECC   0x0C300
 #define IXGBE_PBRXECC   0x03300
 #define IXGBE_GHECCR    0x110B0
@@ -871,6 +888,7 @@
 #define IXGBE_AUTOC3    0x042AC
 #define IXGBE_ANLP1     0x042B0
 #define IXGBE_ANLP2     0x042B4
+#define IXGBE_MACC      0x04330
 #define IXGBE_ATLASCTL  0x04800
 #define IXGBE_MMNGC     0x042D0
 #define IXGBE_ANLPNP1   0x042D4
@@ -883,14 +901,49 @@
 #define IXGBE_MPVC      0x04318
 #define IXGBE_SGMIIC    0x04314
 
+/* Statistics Registers */
+#define IXGBE_RXNFGPC      0x041B0
+#define IXGBE_RXNFGBCL     0x041B4
+#define IXGBE_RXNFGBCH     0x041B8
+#define IXGBE_RXDGPC       0x02F50
+#define IXGBE_RXDGBCL      0x02F54
+#define IXGBE_RXDGBCH      0x02F58
+#define IXGBE_RXDDGPC      0x02F5C
+#define IXGBE_RXDDGBCL     0x02F60
+#define IXGBE_RXDDGBCH     0x02F64
+#define IXGBE_RXLPBKGPC    0x02F68
+#define IXGBE_RXLPBKGBCL   0x02F6C
+#define IXGBE_RXLPBKGBCH   0x02F70
+#define IXGBE_RXDLPBKGPC   0x02F74
+#define IXGBE_RXDLPBKGBCL  0x02F78
+#define IXGBE_RXDLPBKGBCH  0x02F7C
+#define IXGBE_TXDGPC       0x087A0
+#define IXGBE_TXDGBCL      0x087A4
+#define IXGBE_TXDGBCH      0x087A8
+
+#define IXGBE_RXDSTATCTRL 0x02F40
+
+/* Copper Pond 2 link timeout */
 #define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50
 
 /* Omer CORECTL */
 #define IXGBE_CORECTL           0x014F00
 /* BARCTRL */
-#define IXGBE_BARCTRL           0x110F4
-#define IXGBE_BARCTRL_FLSIZE    0x0700
-#define IXGBE_BARCTRL_CSRSIZE   0x2000
+#define IXGBE_BARCTRL               0x110F4
+#define IXGBE_BARCTRL_FLSIZE        0x0700
+#define IXGBE_BARCTRL_FLSIZE_SHIFT  8
+#define IXGBE_BARCTRL_CSRSIZE       0x2000
+
+/* RSCCTL Bit Masks */
+#define IXGBE_RSCCTL_RSCEN          0x01
+#define IXGBE_RSCCTL_MAXDESC_1      0x00
+#define IXGBE_RSCCTL_MAXDESC_4      0x04
+#define IXGBE_RSCCTL_MAXDESC_8      0x08
+#define IXGBE_RSCCTL_MAXDESC_16     0x0C
+
+/* RSCDBU Bit Masks */
+#define IXGBE_RSCDBU_RSCSMALDIS_MASK    0x0000007F
+#define IXGBE_RSCDBU_RSCACKDIS          0x00000080
 
 /* RDRXCTL Bit Masks */
 #define IXGBE_RDRXCTL_RDMTS_1_2     0x00000000 /* Rx Desc Min Threshold Size */
@@ -898,6 +951,8 @@
 #define IXGBE_RDRXCTL_MVMEN         0x00000020
 #define IXGBE_RDRXCTL_DMAIDONE      0x00000008 /* DMA init cycle done */
 #define IXGBE_RDRXCTL_AGGDIS        0x00010000 /* Aggregation disable */
+#define IXGBE_RDRXCTL_RSCFRSTSIZE   0x003E0000 /* RSC First packet size */
+#define IXGBE_RDRXCTL_RSCLLIDIS     0x00800000 /* Disable RSC compl on LLI */
 #define IXGBE_RDRXCTL_RSCACKC       0x02000000 /* must set 1 when RSC enabled */
 #define IXGBE_RDRXCTL_FCOE_WRFIX    0x04000000 /* must set 1 when RSC enabled */
 
@@ -969,8 +1024,8 @@
 #define IXGBE_MSCA_OP_CODE_SHIFT     26 /* OP CODE shift */
 #define IXGBE_MSCA_ADDR_CYCLE        0x00000000 /* OP CODE 00 (addr cycle) */
 #define IXGBE_MSCA_WRITE             0x04000000 /* OP CODE 01 (write) */
-#define IXGBE_MSCA_READ              0x08000000 /* OP CODE 10 (read) */
-#define IXGBE_MSCA_READ_AUTOINC      0x0C000000 /* OP CODE 11 (read, auto inc)*/
+#define IXGBE_MSCA_READ              0x0C000000 /* OP CODE 11 (read) */
+#define IXGBE_MSCA_READ_AUTOINC      0x08000000 /* OP CODE 10 (read, auto inc)*/
 #define IXGBE_MSCA_ST_CODE_MASK      0x30000000 /* ST Code mask */
 #define IXGBE_MSCA_ST_CODE_SHIFT     28 /* ST Code shift */
 #define IXGBE_MSCA_NEW_PROTOCOL      0x00000000 /* ST CODE 00 (new protocol) */
@@ -1057,6 +1112,7 @@
 #define IXGBE_GPIE_EIMEN         0x00000040 /* Immediate Interrupt Enable */
 #define IXGBE_GPIE_EIAME         0x40000000
 #define IXGBE_GPIE_PBA_SUPPORT   0x80000000
+#define IXGBE_GPIE_RSC_DELAY_SHIFT 11
 #define IXGBE_GPIE_VTMODE_MASK   0x0000C000 /* VT Mode Mask */
 #define IXGBE_GPIE_VTMODE_16     0x00004000 /* 16 VFs 8 queues per VF */
 #define IXGBE_GPIE_VTMODE_32     0x00008000 /* 32 VFs 4 queues per VF */
@@ -1291,6 +1347,11 @@
 #define IXGBE_FTQF_POOL_SHIFT           8
 #define IXGBE_FTQF_5TUPLE_MASK_MASK     0x0000001F
 #define IXGBE_FTQF_5TUPLE_MASK_SHIFT    25
+#define IXGBE_FTQF_SOURCE_ADDR_MASK     0x1E
+#define IXGBE_FTQF_DEST_ADDR_MASK       0x1D
+#define IXGBE_FTQF_SOURCE_PORT_MASK     0x1B
+#define IXGBE_FTQF_DEST_PORT_MASK       0x17
+#define IXGBE_FTQF_PROTOCOL_COMP_MASK   0x0F
 #define IXGBE_FTQF_POOL_MASK_EN         0x40000000
 #define IXGBE_FTQF_QUEUE_ENABLE         0x80000000
 
@@ -1333,11 +1394,11 @@
  *
  * Current filters:
  *    EAPOL 802.1x (0x888e): Filter 0
- *    BCN (0x8904):          Filter 1
+ *    FCoE (0x8906):         Filter 2
  *    1588 (0x88f7):         Filter 3
+ *    FIP  (0x8914):         Filter 4
  */
 #define IXGBE_ETQF_FILTER_EAPOL          0
-#define IXGBE_ETQF_FILTER_BCN            1
 #define IXGBE_ETQF_FILTER_FCOE           2
 #define IXGBE_ETQF_FILTER_1588           3
 #define IXGBE_ETQF_FILTER_FIP            4
@@ -1448,6 +1509,11 @@
 #define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
 #define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
 
+#define IXGBE_MACC_FLU       0x00000001
+#define IXGBE_MACC_FSV_10G   0x00030000
+#define IXGBE_MACC_FS        0x00040000
+#define IXGBE_MAC_RX2TX_LPBK 0x00000002
+
 /* LINKS Bit Masks */
 #define IXGBE_LINKS_KX_AN_COMP  0x80000000
 #define IXGBE_LINKS_UP          0x40000000
@@ -1501,7 +1567,6 @@
 #define IXGBE_ANLP1_ASM_PAUSE           0x0800
 #define IXGBE_ANLP1_AN_STATE_MASK       0x000f0000
 
-
 /* SW Semaphore Register bitmasks */
 #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
 #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
@@ -1514,6 +1579,10 @@
 #define IXGBE_GSSR_PHY1_SM    0x0004
 #define IXGBE_GSSR_MAC_CSR_SM 0x0008
 #define IXGBE_GSSR_FLASH_SM   0x0010
+#define IXGBE_GSSR_SW_MNG_SM  0x0400
+
+/* FW Status register bitmask */
+#define IXGBE_FWSTS_FWRI    0x00000200 /* Firmware Reset Indication */
 
 /* EEC Register */
 #define IXGBE_EEC_SK        0x00000001 /* EEPROM Clock */
@@ -1534,6 +1603,7 @@
 /* EEPROM Addressing bits based on type (0-small, 1-large) */
 #define IXGBE_EEC_ADDR_SIZE 0x00000400
 #define IXGBE_EEC_SIZE      0x00007800 /* EEPROM Size */
+#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */
 
 #define IXGBE_EEC_SIZE_SHIFT          11
 #define IXGBE_EEPROM_WORD_SIZE_SHIFT  6
@@ -1563,8 +1633,10 @@
 #define IXGBE_FW_PTR            0x0F
 #define IXGBE_PBANUM0_PTR       0x15
 #define IXGBE_PBANUM1_PTR       0x16
-#define IXGBE_DEVICE_CAPS       0x2C
+#define IXGBE_FREE_SPACE_PTR    0X3E
 #define IXGBE_SAN_MAC_ADDR_PTR  0x28
+#define IXGBE_DEVICE_CAPS       0x2C
+#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
 #define IXGBE_PCIE_MSIX_82599_CAPS  0x72
 #define IXGBE_PCIE_MSIX_82598_CAPS  0x62
 
@@ -1601,6 +1673,10 @@
 
 #define IXGBE_ETH_LENGTH_OF_ADDRESS   6
 
+#define IXGBE_EEPROM_PAGE_SIZE_MAX       128
+#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
+#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
+
 #ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
 #define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
 #endif
@@ -1616,14 +1692,25 @@
 #define IXGBE_FLUDONE_ATTEMPTS 20000
 #endif
 
+#define IXGBE_PCIE_CTRL2                 0x5   /* PCIe Control 2 Offset */
+#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE    0x8   /* Dummy Function Enable */
+#define IXGBE_PCIE_CTRL2_LAN_DISABLE     0x2   /* LAN PCI Disable */
+#define IXGBE_PCIE_CTRL2_DISABLE_SELECT  0x1   /* LAN Disable Select */
+
 #define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET  0x0
 #define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET  0x3
 #define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP  0x1
 #define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS  0x2
+#define IXGBE_FW_LESM_PARAMETERS_PTR     0x2
+#define IXGBE_FW_LESM_STATE_1            0x1
+#define IXGBE_FW_LESM_STATE_ENABLED      0x8000 /* LESM Enable bit */
 #define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR   0x4
-#define IXGBE_FW_PATCH_VERSION_4   0x7
-
-/* Alternative SAN MAC Address Block */
+#define IXGBE_FW_PATCH_VERSION_4         0x7
+#define IXGBE_FCOE_IBA_CAPS_BLK_PTR         0x33 /* iSCSI/FCOE block */
+#define IXGBE_FCOE_IBA_CAPS_FCOE            0x20 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_BLK_PTR            0x17 /* iSCSI/FCOE block */
+#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET       0x0  /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE       0x1  /* FCOE flags enable bit */
 #define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR      0x27 /* Alt. SAN MAC block */
 #define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET  0x0 /* Alt. SAN MAC capability */
 #define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */
@@ -1688,6 +1775,7 @@
 /* Transmit Config masks */
 #define IXGBE_TXDCTL_ENABLE     0x02000000 /* Enable specific Tx Queue */
 #define IXGBE_TXDCTL_SWFLSH     0x04000000 /* Tx Desc. write-back flushing */
+#define IXGBE_TXDCTL_WTHRESH_SHIFT      16 /* shift to WTHRESH bits */
 /* Enable short packet padding to 64 bytes */
 #define IXGBE_TX_PAD_ENABLE     0x00000400
 #define IXGBE_JUMBO_FRAME_ENABLE 0x00000004  /* Allow jumbo frames */
@@ -1701,9 +1789,9 @@
 #define IXGBE_RXCTRL_RXEN       0x00000001  /* Enable Receiver */
 #define IXGBE_RXCTRL_DMBYPS     0x00000002  /* Descriptor Monitor Bypass */
 #define IXGBE_RXDCTL_ENABLE     0x02000000  /* Enable specific Rx Queue */
-#define IXGBE_RXDCTL_VME        0x40000000  /* VLAN mode enable */
 #define IXGBE_RXDCTL_RLPMLMASK  0x00003FFF  /* Only supported on the X540 */
 #define IXGBE_RXDCTL_RLPML_EN   0x00008000
+#define IXGBE_RXDCTL_VME        0x40000000  /* VLAN mode enable */
 
 #define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
 #define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
@@ -1719,6 +1807,8 @@
 #define IXGBE_MFLCN_RPFCE       0x00000004 /* Receive Priority FC Enable */
 #define IXGBE_MFLCN_RFCE        0x00000008 /* Receive FC Enable */
 
+#define IXGBE_MFLCN_RPFCE_SHIFT		 4
+
 /* Multiple Receive Queue Control */
 #define IXGBE_MRQC_RSSEN                 0x00000001  /* RSS Enable */
 #define IXGBE_MRQC_MRQE_MASK                    0xF /* Bits 3:0 */
@@ -1859,6 +1949,8 @@
 #define IXGBE_RXDADV_PKTTYPE_MASK       0x0000FFF0
 #define IXGBE_RXDADV_PKTTYPE_MASK_EX    0x0001FFF0
 #define IXGBE_RXDADV_HDRBUFLEN_MASK     0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK        0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT       17
 #define IXGBE_RXDADV_HDRBUFLEN_SHIFT    5
 #define IXGBE_RXDADV_SPLITHEADER_EN     0x00001000
 #define IXGBE_RXDADV_SPH                0x8000
@@ -1934,15 +2026,6 @@
 #define IXGBE_VFLRE(_i)                  (((_i & 1) ? 0x001C0 : 0x00600))
 #define IXGBE_VFLREC(_i)                 (0x00700 + (_i * 4))
 
-/* Little Endian defines */
-#ifndef __le32
-#define __le32  u32
-#endif
-#ifndef __le64
-#define __le64  u64
-
-#endif
-
 enum ixgbe_fdir_pballoc_type {
 	IXGBE_FDIR_PBALLOC_64K = 0,
 	IXGBE_FDIR_PBALLOC_128K,
@@ -2141,8 +2224,6 @@ typedef u32 ixgbe_link_speed;
                                         IXGBE_LINK_SPEED_1GB_FULL | \
                                         IXGBE_LINK_SPEED_10GB_FULL)
 
-#define IXGBE_PCIE_DEV_CTRL_2 0xC8
-#define PCIE_COMPL_TO_VALUE 0x05
 
 /* Physical layer type */
 typedef u32 ixgbe_physical_layer;
@@ -2315,6 +2396,7 @@ enum ixgbe_sfp_type {
 enum ixgbe_media_type {
 	ixgbe_media_type_unknown = 0,
 	ixgbe_media_type_fiber,
+	ixgbe_media_type_fiber_lco,
 	ixgbe_media_type_copper,
 	ixgbe_media_type_backplane,
 	ixgbe_media_type_cx4,
@@ -2478,6 +2560,10 @@ struct ixgbe_hw_stats {
 	u64 fcoeptc;
 	u64 fcoedwrc;
 	u64 fcoedwtc;
+	u64 b2ospc;
+	u64 b2ogprc;
+	u64 o2bgptc;
+	u64 o2bspc;
 };
 
 /* forward declaration */
@@ -2491,7 +2577,9 @@ typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
 struct ixgbe_eeprom_operations {
 	s32 (*init_params)(struct ixgbe_hw *);
 	s32 (*read)(struct ixgbe_hw *, u16, u16 *);
+	s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
 	s32 (*write)(struct ixgbe_hw *, u16, u16);
+	s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
 	s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
 	s32 (*update_checksum)(struct ixgbe_hw *);
 	u16 (*calc_checksum)(struct ixgbe_hw *);
@@ -2577,6 +2665,7 @@ struct ixgbe_eeprom_info {
 	u32                             semaphore_delay;
 	u16                             word_size;
 	u16                             address_bits;
+	u16                             word_page_size;
 };
 
 #define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED	0x01
@@ -2597,6 +2686,7 @@ struct ixgbe_mac_info {
 	u32                             vft_size;
 	u32                             num_rar_entries;
 	u32                             rar_highwater;
+	u32				rx_pb_size;
 	u32                             max_tx_queues;
 	u32                             max_rx_queues;
 	u32                             max_msix_vectors;
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index f47e93fe32b..4ed687be2fe 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -37,6 +37,7 @@
 #define IXGBE_X540_RAR_ENTRIES   128
 #define IXGBE_X540_MC_TBL_SIZE   128
 #define IXGBE_X540_VFT_TBL_SIZE  128
+#define IXGBE_X540_RX_PB_SIZE	 384
 
 static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
 static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
@@ -226,6 +227,28 @@ mac_reset_top:
 }
 
 /**
+ *  ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function
+ *  and the generation start_hw function.
+ *  Then performs revision-specific operations, if any.
+ **/
+static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
+{
+	s32 ret_val = 0;
+
+	ret_val = ixgbe_start_hw_generic(hw);
+	if (ret_val != 0)
+		goto out;
+
+	ret_val = ixgbe_start_hw_gen2(hw);
+	hw->mac.rx_pb_size = IXGBE_X540_RX_PB_SIZE;
+out:
+	return ret_val;
+}
+
+/**
  *  ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
  *  @hw: pointer to hardware structure
  *
@@ -281,74 +304,105 @@ static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
 }
 
 /**
- * ixgbe_read_eerd_X540 - Read EEPROM word using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EERPOM
+ *  ixgbe_read_eerd_X540- Read EEPROM word using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
  **/
 static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
 {
-	s32 status;
+	s32 status = 0;
 
-	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0)
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    0)
 		status = ixgbe_read_eerd_generic(hw, offset, data);
 	else
 		status = IXGBE_ERR_SWFW_SYNC;
 
-	ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
 	return status;
 }
 
 /**
- * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of  word in the EEPROM to write
- * @data: word write to the EEPROM
+ *  ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
  *
- * Write a 16 bit word to the EEPROM using the EEWR register.
+ *  Reads a 16 bit word(s) from the EEPROM using the EERD register.
  **/
-static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
+				       u16 offset, u16 words, u16 *data)
 {
-	u32 eewr;
-	s32 status;
+	s32 status = 0;
 
-	hw->eeprom.ops.init_params(hw);
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    0)
+		status = ixgbe_read_eerd_buffer_generic(hw, offset,
+							words, data);
+	else
+		status = IXGBE_ERR_SWFW_SYNC;
 
-	if (offset >= hw->eeprom.word_size) {
-		status = IXGBE_ERR_EEPROM;
-		goto out;
-	}
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
 
-	eewr = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) |
-	       (data << IXGBE_EEPROM_RW_REG_DATA) |
-	       IXGBE_EEPROM_RW_REG_START;
+/**
+ *  ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @data: word write to the EEPROM
+ *
+ *  Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status = 0;
 
-	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
-		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
-		if (status != 0) {
-			hw_dbg(hw, "Eeprom write EEWR timed out\n");
-			goto out;
-		}
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0)
+		status = ixgbe_write_eewr_generic(hw, offset, data);
+	else
+		status = IXGBE_ERR_SWFW_SYNC;
 
-		IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
 
-		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
-		if (status != 0) {
-			hw_dbg(hw, "Eeprom write EEWR timed out\n");
-			goto out;
-		}
-	} else {
+/**
+ *  ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to write
+ *  @words: number of words
+ *  @data: word(s) write to the EEPROM
+ *
+ *  Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
+					u16 offset, u16 words, u16 *data)
+{
+	s32 status = 0;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+	    0)
+		status = ixgbe_write_eewr_buffer_generic(hw, offset,
+							 words, data);
+	else
 		status = IXGBE_ERR_SWFW_SYNC;
-	}
 
-out:
-	ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
 	return status;
 }
 
 /**
- * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
- * @hw: pointer to hardware structure
+ *  ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ *
+ *  This function does not use synchronization for EERD and EEWR. It can
+ *  be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
+ *
+ *  @hw: pointer to hardware structure
  **/
 static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
 {
@@ -359,9 +413,15 @@ static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
 	u16 pointer = 0;
 	u16 word = 0;
 
+	/*
+	 * Do not use hw->eeprom.ops.read because we do not want to take
+	 * the synchronization semaphores here. Instead use
+	 * ixgbe_read_eerd_generic
+	 */
+
 	/* Include 0x0-0x3F in the checksum */
 	for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
-		if (hw->eeprom.ops.read(hw, i, &word) != 0) {
+		if (ixgbe_read_eerd_generic(hw, i, &word) != 0) {
 			hw_dbg(hw, "EEPROM read failed\n");
 			break;
 		}
@@ -376,7 +436,7 @@ static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
 		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
 			continue;
 
-		if (hw->eeprom.ops.read(hw, i, &pointer) != 0) {
+		if (ixgbe_read_eerd_generic(hw, i, &pointer) != 0) {
 			hw_dbg(hw, "EEPROM read failed\n");
 			break;
 		}
@@ -386,7 +446,7 @@ static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
 		    pointer >= hw->eeprom.word_size)
 			continue;
 
-		if (hw->eeprom.ops.read(hw, pointer, &length) != 0) {
+		if (ixgbe_read_eerd_generic(hw, pointer, &length) != 0) {
 			hw_dbg(hw, "EEPROM read failed\n");
 			break;
 		}
@@ -397,7 +457,7 @@ static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
 			continue;
 
 		for (j = pointer+1; j <= pointer+length; j++) {
-			if (hw->eeprom.ops.read(hw, j, &word) != 0) {
+			if (ixgbe_read_eerd_generic(hw, j, &word) != 0) {
 				hw_dbg(hw, "EEPROM read failed\n");
 				break;
 			}
@@ -411,6 +471,62 @@ static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
+					       u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	/*
+	 * Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+	if (status != 0) {
+		hw_dbg(hw, "EEPROM read failed\n");
+		goto out;
+	}
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+		checksum = hw->eeprom.ops.calc_checksum(hw);
+
+		/*
+		 * Do not use hw->eeprom.ops.read because we do not want to take
+		 * the synchronization semaphores twice here.
+		 */
+		ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
+					&read_checksum);
+
+		/*
+		 * Verify read checksum from EEPROM is the same as
+		 * calculated checksum
+		 */
+		if (read_checksum != checksum)
+			status = IXGBE_ERR_EEPROM_CHECKSUM;
+
+		/* If the user cares, return the calculated checksum */
+		if (checksum_val)
+			*checksum_val = checksum;
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+out:
+	return status;
+}
+
+/**
  * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
  * @hw: pointer to hardware structure
  *
@@ -421,11 +537,35 @@ static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
 static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
 {
 	s32 status;
+	u16 checksum;
+
+	/*
+	 * Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+	if (status != 0)
+		hw_dbg(hw, "EEPROM read failed\n");
 
-	status = ixgbe_update_eeprom_checksum_generic(hw);
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+		checksum = hw->eeprom.ops.calc_checksum(hw);
+
+		/*
+		 * Do not use hw->eeprom.ops.write because we do not want to
+		 * take the synchronization semaphores twice here.
+		 */
+		status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM,
+						  checksum);
 
-	if (status)
+	if (status == 0)
 		status = ixgbe_update_flash_X540(hw);
+	else
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
 
 	return status;
 }
@@ -452,7 +592,7 @@ static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
 
 	status = ixgbe_poll_flash_update_done_X540(hw);
-	if (status)
+	if (status == 0)
 		hw_dbg(hw, "Flash update complete\n");
 	else
 		hw_dbg(hw, "Flash update time out\n");
@@ -466,11 +606,10 @@ static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
 		}
 
 		status = ixgbe_poll_flash_update_done_X540(hw);
-		if (status)
+		if (status == 0)
 			hw_dbg(hw, "Flash update complete\n");
 		else
 			hw_dbg(hw, "Flash update time out\n");
-
 	}
 out:
 	return status;
@@ -542,7 +681,7 @@ static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
 			 * resource (swmask)
 			 */
 			ixgbe_release_swfw_sync_semaphore(hw);
-			msleep(5);
+			usleep_range(5000, 10000);
 		}
 	}
 
@@ -564,7 +703,7 @@ static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
 		}
 	}
 
-	msleep(5);
+	usleep_range(5000, 10000);
 	return 0;
 }
 
@@ -573,7 +712,7 @@ static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
  * @hw: pointer to hardware structure
  * @mask: Mask to specify which semaphore to release
  *
- * Releases the SWFW semaphore throught the SW_FW_SYNC register
+ * Releases the SWFW semaphore through the SW_FW_SYNC register
  * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
  **/
 static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
@@ -588,7 +727,7 @@ static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
 	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
 
 	ixgbe_release_swfw_sync_semaphore(hw);
-	msleep(5);
+	usleep_range(5000, 10000);
 }
 
 /**
@@ -658,10 +797,70 @@ static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
 	IXGBE_WRITE_FLUSH(hw);
 }
 
+/**
+ * ixgbe_blink_led_start_X540 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Devices that implement the version 2 interface:
+ *   X540
+ **/
+static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
+{
+	u32 macc_reg;
+	u32 ledctl_reg;
+
+	/*
+	 * In order for the blink bit in the LED control register
+	 * to work, link and speed must be forced in the MAC. We
+	 * will reverse this when we stop the blinking.
+	 */
+	macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+
+	/* Set the LED to LINK_UP + BLINK. */
+	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+	ledctl_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ *
+ * Devices that implement the version 2 interface:
+ *   X540
+ **/
+static s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
+{
+	u32 macc_reg;
+	u32 ledctl_reg;
+
+	/* Restore the LED to its default value. */
+	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+	ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+	ledctl_reg &= ~IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+
+	/* Unforce link and speed in the MAC. */
+	macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
 static struct ixgbe_mac_operations mac_ops_X540 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_X540,
-	.start_hw               = &ixgbe_start_hw_generic,
+	.start_hw               = &ixgbe_start_hw_X540,
 	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
 	.get_media_type         = &ixgbe_get_media_type_X540,
 	.get_supported_physical_layer =
@@ -669,7 +868,7 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_generic,
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
 	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
-	.get_device_caps        = NULL,
+	.get_device_caps        = &ixgbe_get_device_caps_generic,
 	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
@@ -681,8 +880,8 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
 	.get_link_capabilities  = &ixgbe_get_copper_link_capabilities_generic,
 	.led_on                 = &ixgbe_led_on_generic,
 	.led_off                = &ixgbe_led_off_generic,
-	.blink_led_start        = &ixgbe_blink_led_start_generic,
-	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
+	.blink_led_start        = &ixgbe_blink_led_start_X540,
+	.blink_led_stop         = &ixgbe_blink_led_stop_X540,
 	.set_rar                = &ixgbe_set_rar_generic,
 	.clear_rar              = &ixgbe_clear_rar_generic,
 	.set_vmdq               = &ixgbe_set_vmdq_generic,
@@ -705,9 +904,11 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
 static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
 	.init_params            = &ixgbe_init_eeprom_params_X540,
 	.read                   = &ixgbe_read_eerd_X540,
+	.read_buffer		= &ixgbe_read_eerd_buffer_X540,
 	.write                  = &ixgbe_write_eewr_X540,
+	.write_buffer		= &ixgbe_write_eewr_buffer_X540,
 	.calc_checksum		= &ixgbe_calc_eeprom_checksum_X540,
-	.validate_checksum      = &ixgbe_validate_eeprom_checksum_generic,
+	.validate_checksum      = &ixgbe_validate_eeprom_checksum_X540,
 	.update_checksum        = &ixgbe_update_eeprom_checksum_X540,
 };
 
diff --git a/drivers/net/ixgbevf/ethtool.c b/drivers/net/ixgbevf/ethtool.c
index 0563ab29264..deee3754b1f 100644
--- a/drivers/net/ixgbevf/ethtool.c
+++ b/drivers/net/ixgbevf/ethtool.c
@@ -104,11 +104,13 @@ static int ixgbevf_get_settings(struct net_device *netdev,
 	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
 
 	if (link_up) {
-		ecmd->speed = (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
-			       SPEED_10000 : SPEED_1000;
+		ethtool_cmd_speed_set(
+			ecmd,
+			(link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
+			SPEED_10000 : SPEED_1000);
 		ecmd->duplex = DUPLEX_FULL;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 054ab05b7c6..d7ab202fb95 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -1460,6 +1460,34 @@ static void ixgbevf_restore_vlan(struct ixgbevf_adapter *adapter)
 	}
 }
 
+static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
+{
+	struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	int count = 0;
+
+	if ((netdev_uc_count(netdev)) > 10) {
+		printk(KERN_ERR "Too many unicast filters - No Space\n");
+		return -ENOSPC;
+	}
+
+	if (!netdev_uc_empty(netdev)) {
+		struct netdev_hw_addr *ha;
+		netdev_for_each_uc_addr(ha, netdev) {
+			hw->mac.ops.set_uc_addr(hw, ++count, ha->addr);
+			udelay(200);
+		}
+	} else {
+		/*
+		 * If the list is empty then send message to PF driver to
+		 * clear all macvlans on this VF.
+		 */
+		hw->mac.ops.set_uc_addr(hw, 0, NULL);
+	}
+
+	return count;
+}
+
 /**
  * ixgbevf_set_rx_mode - Multicast set
  * @netdev: network interface device structure
@@ -1476,6 +1504,8 @@ static void ixgbevf_set_rx_mode(struct net_device *netdev)
 	/* reprogram multicast list */
 	if (hw->mac.ops.update_mc_addr_list)
 		hw->mac.ops.update_mc_addr_list(hw, netdev);
+
+	ixgbevf_write_uc_addr_list(netdev);
 }
 
 static void ixgbevf_napi_enable_all(struct ixgbevf_adapter *adapter)
@@ -1925,7 +1955,7 @@ static void ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
 }
 
 /*
- * ixgbevf_set_num_queues: Allocate queues for device, feature dependant
+ * ixgbevf_set_num_queues: Allocate queues for device, feature dependent
  * @adapter: board private structure to initialize
  *
  * This is the top level queue allocation routine.  The order here is very
diff --git a/drivers/net/ixgbevf/mbx.h b/drivers/net/ixgbevf/mbx.h
index b2b5bf5daa3..ea393eb03f3 100644
--- a/drivers/net/ixgbevf/mbx.h
+++ b/drivers/net/ixgbevf/mbx.h
@@ -81,6 +81,7 @@
 #define IXGBE_VF_SET_MULTICAST    0x03 /* VF requests PF to set MC addr */
 #define IXGBE_VF_SET_VLAN         0x04 /* VF requests PF to set VLAN */
 #define IXGBE_VF_SET_LPE          0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN      0x06 /* VF requests PF for unicast filter */
 
 /* length of permanent address message returned from PF */
 #define IXGBE_VF_PERMADDR_MSG_LEN 4
diff --git a/drivers/net/ixgbevf/vf.c b/drivers/net/ixgbevf/vf.c
index eecd3bf6833..aa3682e8c47 100644
--- a/drivers/net/ixgbevf/vf.c
+++ b/drivers/net/ixgbevf/vf.c
@@ -216,6 +216,39 @@ static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
 	return 0;
 }
 
+static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
+{
+	struct ixgbe_mbx_info *mbx = &hw->mbx;
+	u32 msgbuf[3];
+	u8 *msg_addr = (u8 *)(&msgbuf[1]);
+	s32 ret_val;
+
+	memset(msgbuf, 0, sizeof(msgbuf));
+	/*
+	 * If index is one then this is the start of a new list and needs
+	 * indication to the PF so it can do it's own list management.
+	 * If it is zero then that tells the PF to just clear all of
+	 * this VF's macvlans and there is no new list.
+	 */
+	msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
+	msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
+	if (addr)
+		memcpy(msg_addr, addr, 6);
+	ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+	if (!ret_val)
+		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+	if (!ret_val)
+		if (msgbuf[0] ==
+		    (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
+			ret_val = -ENOMEM;
+
+	return ret_val;
+}
+
 /**
  *  ixgbevf_set_rar_vf - set device MAC address
  *  @hw: pointer to hardware structure
@@ -378,6 +411,7 @@ static struct ixgbe_mac_operations ixgbevf_mac_ops = {
 	.check_link          = ixgbevf_check_mac_link_vf,
 	.set_rar             = ixgbevf_set_rar_vf,
 	.update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
+	.set_uc_addr         = ixgbevf_set_uc_addr_vf,
 	.set_vfta            = ixgbevf_set_vfta_vf,
 };
 
diff --git a/drivers/net/ixgbevf/vf.h b/drivers/net/ixgbevf/vf.h
index 23eb114c149..10306b492ee 100644
--- a/drivers/net/ixgbevf/vf.h
+++ b/drivers/net/ixgbevf/vf.h
@@ -62,6 +62,7 @@ struct ixgbe_mac_operations {
 
 	/* RAR, Multicast, VLAN */
 	s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32);
+	s32 (*set_uc_addr)(struct ixgbe_hw *, u32, u8 *);
 	s32 (*init_rx_addrs)(struct ixgbe_hw *);
 	s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *);
 	s32 (*enable_mc)(struct ixgbe_hw *);
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 994c80939c7..b5b174a8c14 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -2230,17 +2230,9 @@ jme_change_mtu(struct net_device *netdev, int new_mtu)
 		jme_restart_rx_engine(jme);
 	}
 
-	if (new_mtu > 1900) {
-		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
-				NETIF_F_TSO | NETIF_F_TSO6);
-	} else {
-		if (test_bit(JME_FLAG_TXCSUM, &jme->flags))
-			netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-		if (test_bit(JME_FLAG_TSO, &jme->flags))
-			netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
-	}
-
 	netdev->mtu = new_mtu;
+	netdev_update_features(netdev);
+
 	jme_reset_link(jme);
 
 	return 0;
@@ -2563,7 +2555,8 @@ jme_set_settings(struct net_device *netdev,
 	struct jme_adapter *jme = netdev_priv(netdev);
 	int rc, fdc = 0;
 
-	if (ecmd->speed == SPEED_1000 && ecmd->autoneg != AUTONEG_ENABLE)
+	if (ethtool_cmd_speed(ecmd) == SPEED_1000
+	    && ecmd->autoneg != AUTONEG_ENABLE)
 		return -EINVAL;
 
 	/*
@@ -2640,19 +2633,20 @@ jme_set_msglevel(struct net_device *netdev, u32 value)
 }
 
 static u32
-jme_get_rx_csum(struct net_device *netdev)
+jme_fix_features(struct net_device *netdev, u32 features)
 {
-	struct jme_adapter *jme = netdev_priv(netdev);
-	return jme->reg_rxmcs & RXMCS_CHECKSUM;
+	if (netdev->mtu > 1900)
+		features &= ~(NETIF_F_ALL_TSO | NETIF_F_ALL_CSUM);
+	return features;
 }
 
 static int
-jme_set_rx_csum(struct net_device *netdev, u32 on)
+jme_set_features(struct net_device *netdev, u32 features)
 {
 	struct jme_adapter *jme = netdev_priv(netdev);
 
 	spin_lock_bh(&jme->rxmcs_lock);
-	if (on)
+	if (features & NETIF_F_RXCSUM)
 		jme->reg_rxmcs |= RXMCS_CHECKSUM;
 	else
 		jme->reg_rxmcs &= ~RXMCS_CHECKSUM;
@@ -2663,42 +2657,6 @@ jme_set_rx_csum(struct net_device *netdev, u32 on)
 }
 
 static int
-jme_set_tx_csum(struct net_device *netdev, u32 on)
-{
-	struct jme_adapter *jme = netdev_priv(netdev);
-
-	if (on) {
-		set_bit(JME_FLAG_TXCSUM, &jme->flags);
-		if (netdev->mtu <= 1900)
-			netdev->features |=
-				NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-	} else {
-		clear_bit(JME_FLAG_TXCSUM, &jme->flags);
-		netdev->features &=
-				~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-	}
-
-	return 0;
-}
-
-static int
-jme_set_tso(struct net_device *netdev, u32 on)
-{
-	struct jme_adapter *jme = netdev_priv(netdev);
-
-	if (on) {
-		set_bit(JME_FLAG_TSO, &jme->flags);
-		if (netdev->mtu <= 1900)
-			netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
-	} else {
-		clear_bit(JME_FLAG_TSO, &jme->flags);
-		netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-	}
-
-	return 0;
-}
-
-static int
 jme_nway_reset(struct net_device *netdev)
 {
 	struct jme_adapter *jme = netdev_priv(netdev);
@@ -2839,11 +2797,6 @@ static const struct ethtool_ops jme_ethtool_ops = {
 	.get_link		= jme_get_link,
 	.get_msglevel           = jme_get_msglevel,
 	.set_msglevel           = jme_set_msglevel,
-	.get_rx_csum		= jme_get_rx_csum,
-	.set_rx_csum		= jme_set_rx_csum,
-	.set_tx_csum		= jme_set_tx_csum,
-	.set_tso		= jme_set_tso,
-	.set_sg			= ethtool_op_set_sg,
 	.nway_reset             = jme_nway_reset,
 	.get_eeprom_len		= jme_get_eeprom_len,
 	.get_eeprom		= jme_get_eeprom,
@@ -2903,6 +2856,8 @@ static const struct net_device_ops jme_netdev_ops = {
 	.ndo_change_mtu		= jme_change_mtu,
 	.ndo_tx_timeout		= jme_tx_timeout,
 	.ndo_vlan_rx_register	= jme_vlan_rx_register,
+	.ndo_fix_features       = jme_fix_features,
+	.ndo_set_features       = jme_set_features,
 };
 
 static int __devinit
@@ -2957,6 +2912,12 @@ jme_init_one(struct pci_dev *pdev,
 	netdev->netdev_ops = &jme_netdev_ops;
 	netdev->ethtool_ops		= &jme_ethtool_ops;
 	netdev->watchdog_timeo		= TX_TIMEOUT;
+	netdev->hw_features		=	NETIF_F_IP_CSUM |
+						NETIF_F_IPV6_CSUM |
+						NETIF_F_SG |
+						NETIF_F_TSO |
+						NETIF_F_TSO6 |
+						NETIF_F_RXCSUM;
 	netdev->features		=	NETIF_F_IP_CSUM |
 						NETIF_F_IPV6_CSUM |
 						NETIF_F_SG |
@@ -3040,8 +3001,9 @@ jme_init_one(struct pci_dev *pdev,
 	jme->reg_txpfc = 0;
 	jme->reg_pmcs = PMCS_MFEN;
 	jme->reg_gpreg1 = GPREG1_DEFAULT;
-	set_bit(JME_FLAG_TXCSUM, &jme->flags);
-	set_bit(JME_FLAG_TSO, &jme->flags);
+
+	if (jme->reg_rxmcs & RXMCS_CHECKSUM)
+		netdev->features |= NETIF_F_RXCSUM;
 
 	/*
 	 * Get Max Read Req Size from PCI Config Space
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index 8bf30451e82..e9aaeca96ab 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -468,8 +468,6 @@ struct jme_adapter {
 enum jme_flags_bits {
 	JME_FLAG_MSI		= 1,
 	JME_FLAG_SSET		= 2,
-	JME_FLAG_TXCSUM		= 3,
-	JME_FLAG_TSO		= 4,
 	JME_FLAG_POLL		= 5,
 	JME_FLAG_SHUTDOWN	= 6,
 };
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
index efd44afeae8..f0d8346d0fa 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ks8842.c
@@ -321,7 +321,7 @@ static void ks8842_reset_hw(struct ks8842_adapter *adapter)
 	/* RX 2 kb high watermark */
 	ks8842_write16(adapter, 0, 0x1000, REG_QRFCR);
 
-	/* aggresive back off in half duplex */
+	/* aggressive back off in half duplex */
 	ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);
 
 	/* enable no excessive collison drop */
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 0fa4a9887ba..bcd9ba68c9f 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -141,7 +141,7 @@ static int msg_enable;
  *
  * All these calls issue SPI transactions to access the chip's registers. They
  * all require that the necessary lock is held to prevent accesses when the
- * chip is busy transfering packet data (RX/TX FIFO accesses).
+ * chip is busy transferring packet data (RX/TX FIFO accesses).
  */
 
 /**
@@ -483,7 +483,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
 	 *
 	 * This form of operation would require us to hold the SPI bus'
 	 * chipselect low during the entie transaction to avoid any
-	 * reset to the data stream comming from the chip.
+	 * reset to the data stream coming from the chip.
 	 */
 
 	for (; rxfc != 0; rxfc--) {
@@ -634,7 +634,7 @@ static void ks8851_irq_work(struct work_struct *work)
 
 /**
  * calc_txlen - calculate size of message to send packet
- * @len: Lenght of data
+ * @len: Length of data
  *
  * Returns the size of the TXFIFO message needed to send
  * this packet.
@@ -1472,7 +1472,7 @@ static int ks8851_phy_reg(int reg)
  * @reg: The register to read.
  *
  * This call reads data from the PHY register specified in @reg. Since the
- * device does not support all the MII registers, the non-existant values
+ * device does not support all the MII registers, the non-existent values
  * are always returned as zero.
  *
  * We return zero for unsupported registers as the MII code does not check
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index 2e2c69b2406..61631cace91 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -470,7 +470,7 @@ static int msg_enable;
  *
  * All these calls issue transactions to access the chip's registers. They
  * all require that the necessary lock is held to prevent accesses when the
- * chip is busy transfering packet data (RX/TX FIFO accesses).
+ * chip is busy transferring packet data (RX/TX FIFO accesses).
  */
 
 /**
@@ -1364,7 +1364,7 @@ static int ks_phy_reg(int reg)
  * @reg: The register to read.
  *
  * This call reads data from the PHY register specified in @reg. Since the
- * device does not support all the MII registers, the non-existant values
+ * device does not support all the MII registers, the non-existent values
  * are always returned as zero.
  *
  * We return zero for unsupported registers as the MII code does not check
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 7f7d5708a65..41ea5920c15 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -1221,7 +1221,6 @@ struct ksz_port_info {
 #define LINK_INT_WORKING		(1 << 0)
 #define SMALL_PACKET_TX_BUG		(1 << 1)
 #define HALF_DUPLEX_SIGNAL_BUG		(1 << 2)
-#define IPV6_CSUM_GEN_HACK		(1 << 3)
 #define RX_HUGE_FRAME			(1 << 4)
 #define STP_SUPPORT			(1 << 8)
 
@@ -3748,7 +3747,6 @@ static int hw_init(struct ksz_hw *hw)
 		if (1 == rc)
 			hw->features |= HALF_DUPLEX_SIGNAL_BUG;
 	}
-	hw->features |= IPV6_CSUM_GEN_HACK;
 	return rc;
 }
 
@@ -4887,8 +4885,7 @@ static netdev_tx_t netdev_tx(struct sk_buff *skb, struct net_device *dev)
 	left = hw_alloc_pkt(hw, skb->len, num);
 	if (left) {
 		if (left < num ||
-				((hw->features & IPV6_CSUM_GEN_HACK) &&
-				(CHECKSUM_PARTIAL == skb->ip_summed) &&
+				((CHECKSUM_PARTIAL == skb->ip_summed) &&
 				(ETH_P_IPV6 == htons(skb->protocol)))) {
 			struct sk_buff *org_skb = skb;
 
@@ -6001,6 +5998,7 @@ static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	struct dev_priv *priv = netdev_priv(dev);
 	struct dev_info *hw_priv = priv->adapter;
 	struct ksz_port *port = &priv->port;
+	u32 speed = ethtool_cmd_speed(cmd);
 	int rc;
 
 	/*
@@ -6009,11 +6007,11 @@ static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	 */
 	if (cmd->autoneg && priv->advertising == cmd->advertising) {
 		cmd->advertising |= ADVERTISED_ALL;
-		if (10 == cmd->speed)
+		if (10 == speed)
 			cmd->advertising &=
 				~(ADVERTISED_100baseT_Full |
 				ADVERTISED_100baseT_Half);
-		else if (100 == cmd->speed)
+		else if (100 == speed)
 			cmd->advertising &=
 				~(ADVERTISED_10baseT_Full |
 				ADVERTISED_10baseT_Half);
@@ -6035,8 +6033,8 @@ static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		port->force_link = 0;
 	} else {
 		port->duplex = cmd->duplex + 1;
-		if (cmd->speed != 1000)
-			port->speed = cmd->speed;
+		if (1000 != speed)
+			port->speed = speed;
 		if (cmd->autoneg)
 			port->force_link = 0;
 		else
@@ -6583,57 +6581,33 @@ static void netdev_get_ethtool_stats(struct net_device *dev,
 }
 
 /**
- * netdev_get_rx_csum - get receive checksum support
+ * netdev_set_features - set receive checksum support
  * @dev:	Network device.
- *
- * This function gets receive checksum support setting.
- *
- * Return true if receive checksum is enabled; false otherwise.
- */
-static u32 netdev_get_rx_csum(struct net_device *dev)
-{
-	struct dev_priv *priv = netdev_priv(dev);
-	struct dev_info *hw_priv = priv->adapter;
-	struct ksz_hw *hw = &hw_priv->hw;
-
-	return hw->rx_cfg &
-		(DMA_RX_CSUM_UDP |
-		DMA_RX_CSUM_TCP |
-		DMA_RX_CSUM_IP);
-}
-
-/**
- * netdev_set_rx_csum - set receive checksum support
- * @dev:	Network device.
- * @data:	Zero to disable receive checksum support.
+ * @features:	New device features (offloads).
  *
  * This function sets receive checksum support setting.
  *
  * Return 0 if successful; otherwise an error code.
  */
-static int netdev_set_rx_csum(struct net_device *dev, u32 data)
+static int netdev_set_features(struct net_device *dev, u32 features)
 {
 	struct dev_priv *priv = netdev_priv(dev);
 	struct dev_info *hw_priv = priv->adapter;
 	struct ksz_hw *hw = &hw_priv->hw;
-	u32 new_setting = hw->rx_cfg;
 
-	if (data)
-		new_setting |=
-			(DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
-			DMA_RX_CSUM_IP);
-	else
-		new_setting &=
-			~(DMA_RX_CSUM_UDP | DMA_RX_CSUM_TCP |
-			DMA_RX_CSUM_IP);
-	new_setting &= ~DMA_RX_CSUM_UDP;
 	mutex_lock(&hw_priv->lock);
-	if (new_setting != hw->rx_cfg) {
-		hw->rx_cfg = new_setting;
-		if (hw->enabled)
-			writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
-	}
+
+	/* see note in hw_setup() */
+	if (features & NETIF_F_RXCSUM)
+		hw->rx_cfg |= DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP;
+	else
+		hw->rx_cfg &= ~(DMA_RX_CSUM_TCP | DMA_RX_CSUM_IP);
+
+	if (hw->enabled)
+		writel(hw->rx_cfg, hw->io + KS_DMA_RX_CTRL);
+
 	mutex_unlock(&hw_priv->lock);
+
 	return 0;
 }
 
@@ -6658,12 +6632,6 @@ static struct ethtool_ops netdev_ethtool_ops = {
 	.get_strings		= netdev_get_strings,
 	.get_sset_count		= netdev_get_sset_count,
 	.get_ethtool_stats	= netdev_get_ethtool_stats,
-	.get_rx_csum		= netdev_get_rx_csum,
-	.set_rx_csum		= netdev_set_rx_csum,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
 };
 
 /*
@@ -6828,14 +6796,15 @@ static int __init netdev_init(struct net_device *dev)
 	/* 500 ms timeout */
 	dev->watchdog_timeo = HZ / 2;
 
-	dev->features |= NETIF_F_IP_CSUM;
+	dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_RXCSUM;
 
 	/*
 	 * Hardware does not really support IPv6 checksum generation, but
-	 * driver actually runs faster with this on.  Refer IPV6_CSUM_GEN_HACK.
+	 * driver actually runs faster with this on.
 	 */
-	dev->features |= NETIF_F_IPV6_CSUM;
-	dev->features |= NETIF_F_SG;
+	dev->hw_features |= NETIF_F_IPV6_CSUM;
+
+	dev->features |= dev->hw_features;
 
 	sema_init(&priv->proc_sem, 1);
 
@@ -6860,6 +6829,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_start_xmit		= netdev_tx,
 	.ndo_tx_timeout		= netdev_tx_timeout,
 	.ndo_change_mtu		= netdev_change_mtu,
+	.ndo_set_features	= netdev_set_features,
 	.ndo_set_mac_address	= netdev_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= netdev_ioctl,
diff --git a/drivers/net/lantiq_etop.c b/drivers/net/lantiq_etop.c
new file mode 100644
index 00000000000..45f252b7da3
--- /dev/null
+++ b/drivers/net/lantiq_etop.c
@@ -0,0 +1,805 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License version 2 as published
+ *   by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/checksum.h>
+
+#include <lantiq_soc.h>
+#include <xway_dma.h>
+#include <lantiq_platform.h>
+
+#define LTQ_ETOP_MDIO		0x11804
+#define MDIO_REQUEST		0x80000000
+#define MDIO_READ		0x40000000
+#define MDIO_ADDR_MASK		0x1f
+#define MDIO_ADDR_OFFSET	0x15
+#define MDIO_REG_MASK		0x1f
+#define MDIO_REG_OFFSET		0x10
+#define MDIO_VAL_MASK		0xffff
+
+#define PPE32_CGEN		0x800
+#define LQ_PPE32_ENET_MAC_CFG	0x1840
+
+#define LTQ_ETOP_ENETS0		0x11850
+#define LTQ_ETOP_MAC_DA0	0x1186C
+#define LTQ_ETOP_MAC_DA1	0x11870
+#define LTQ_ETOP_CFG		0x16020
+#define LTQ_ETOP_IGPLEN		0x16080
+
+#define MAX_DMA_CHAN		0x8
+#define MAX_DMA_CRC_LEN		0x4
+#define MAX_DMA_DATA_LEN	0x600
+
+#define ETOP_FTCU		BIT(28)
+#define ETOP_MII_MASK		0xf
+#define ETOP_MII_NORMAL		0xd
+#define ETOP_MII_REVERSE	0xe
+#define ETOP_PLEN_UNDER		0x40
+#define ETOP_CGEN		0x800
+
+/* use 2 static channels for TX/RX */
+#define LTQ_ETOP_TX_CHANNEL	1
+#define LTQ_ETOP_RX_CHANNEL	6
+#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
+#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
+
+#define ltq_etop_r32(x)		ltq_r32(ltq_etop_membase + (x))
+#define ltq_etop_w32(x, y)	ltq_w32(x, ltq_etop_membase + (y))
+#define ltq_etop_w32_mask(x, y, z)	\
+		ltq_w32_mask(x, y, ltq_etop_membase + (z))
+
+#define DRV_VERSION	"1.0"
+
+static void __iomem *ltq_etop_membase;
+
+struct ltq_etop_chan {
+	int idx;
+	int tx_free;
+	struct net_device *netdev;
+	struct napi_struct napi;
+	struct ltq_dma_channel dma;
+	struct sk_buff *skb[LTQ_DESC_NUM];
+};
+
+struct ltq_etop_priv {
+	struct net_device *netdev;
+	struct ltq_eth_data *pldata;
+	struct resource *res;
+
+	struct mii_bus *mii_bus;
+	struct phy_device *phydev;
+
+	struct ltq_etop_chan ch[MAX_DMA_CHAN];
+	int tx_free[MAX_DMA_CHAN >> 1];
+
+	spinlock_t lock;
+};
+
+static int
+ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+{
+	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+	if (!ch->skb[ch->dma.desc])
+		return -ENOMEM;
+	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+		ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
+		DMA_FROM_DEVICE);
+	ch->dma.desc_base[ch->dma.desc].addr =
+		CPHYSADDR(ch->skb[ch->dma.desc]->data);
+	ch->dma.desc_base[ch->dma.desc].ctl =
+		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+		MAX_DMA_DATA_LEN;
+	skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
+	return 0;
+}
+
+static void
+ltq_etop_hw_receive(struct ltq_etop_chan *ch)
+{
+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+	struct sk_buff *skb = ch->skb[ch->dma.desc];
+	int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (ltq_etop_alloc_skb(ch)) {
+		netdev_err(ch->netdev,
+			"failed to allocate new rx buffer, stopping DMA\n");
+		ltq_dma_close(&ch->dma);
+	}
+	ch->dma.desc++;
+	ch->dma.desc %= LTQ_DESC_NUM;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	skb_put(skb, len);
+	skb->dev = ch->netdev;
+	skb->protocol = eth_type_trans(skb, ch->netdev);
+	netif_receive_skb(skb);
+}
+
+static int
+ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+{
+	struct ltq_etop_chan *ch = container_of(napi,
+				struct ltq_etop_chan, napi);
+	int rx = 0;
+	int complete = 0;
+
+	while ((rx < budget) && !complete) {
+		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+
+		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+			ltq_etop_hw_receive(ch);
+			rx++;
+		} else {
+			complete = 1;
+		}
+	}
+	if (complete || !rx) {
+		napi_complete(&ch->napi);
+		ltq_dma_ack_irq(&ch->dma);
+	}
+	return rx;
+}
+
+static int
+ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+{
+	struct ltq_etop_chan *ch =
+		container_of(napi, struct ltq_etop_chan, napi);
+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+	struct netdev_queue *txq =
+		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	while ((ch->dma.desc_base[ch->tx_free].ctl &
+			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+		dev_kfree_skb_any(ch->skb[ch->tx_free]);
+		ch->skb[ch->tx_free] = NULL;
+		memset(&ch->dma.desc_base[ch->tx_free], 0,
+			sizeof(struct ltq_dma_desc));
+		ch->tx_free++;
+		ch->tx_free %= LTQ_DESC_NUM;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (netif_tx_queue_stopped(txq))
+		netif_tx_start_queue(txq);
+	napi_complete(&ch->napi);
+	ltq_dma_ack_irq(&ch->dma);
+	return 1;
+}
+
+static irqreturn_t
+ltq_etop_dma_irq(int irq, void *_priv)
+{
+	struct ltq_etop_priv *priv = _priv;
+	int ch = irq - LTQ_DMA_CH0_INT;
+
+	napi_schedule(&priv->ch[ch].napi);
+	return IRQ_HANDLED;
+}
+
+static void
+ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	ltq_dma_free(&ch->dma);
+	if (ch->dma.irq)
+		free_irq(ch->dma.irq, priv);
+	if (IS_RX(ch->idx)) {
+		int desc;
+		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+	}
+}
+
+static void
+ltq_etop_hw_exit(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	ltq_pmu_disable(PMU_PPE);
+	for (i = 0; i < MAX_DMA_CHAN; i++)
+		if (IS_TX(i) || IS_RX(i))
+			ltq_etop_free_channel(dev, &priv->ch[i]);
+}
+
+static int
+ltq_etop_hw_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	ltq_pmu_enable(PMU_PPE);
+
+	switch (priv->pldata->mii_mode) {
+	case PHY_INTERFACE_MODE_RMII:
+		ltq_etop_w32_mask(ETOP_MII_MASK,
+			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+		break;
+
+	case PHY_INTERFACE_MODE_MII:
+		ltq_etop_w32_mask(ETOP_MII_MASK,
+			ETOP_MII_NORMAL, LTQ_ETOP_CFG);
+		break;
+
+	default:
+		netdev_err(dev, "unknown mii mode %d\n",
+			priv->pldata->mii_mode);
+		return -ENOTSUPP;
+	}
+
+	/* enable crc generation */
+	ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
+
+	ltq_dma_init_port(DMA_PORT_ETOP);
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		int irq = LTQ_DMA_CH0_INT + i;
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		ch->idx = ch->dma.nr = i;
+
+		if (IS_TX(i)) {
+			ltq_dma_alloc_tx(&ch->dma);
+			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+				"etop_tx", priv);
+		} else if (IS_RX(i)) {
+			ltq_dma_alloc_rx(&ch->dma);
+			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+					ch->dma.desc++)
+				if (ltq_etop_alloc_skb(ch))
+					return -ENOMEM;
+			ch->dma.desc = 0;
+			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+				"etop_rx", priv);
+		}
+		ch->dma.irq = irq;
+	}
+	return 0;
+}
+
+static void
+ltq_etop_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, "Lantiq ETOP");
+	strcpy(info->bus_info, "internal");
+	strcpy(info->version, DRV_VERSION);
+}
+
+static int
+ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_ethtool_gset(priv->phydev, cmd);
+}
+
+static int
+ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_ethtool_sset(priv->phydev, cmd);
+}
+
+static int
+ltq_etop_nway_reset(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	return phy_start_aneg(priv->phydev);
+}
+
+static const struct ethtool_ops ltq_etop_ethtool_ops = {
+	.get_drvinfo = ltq_etop_get_drvinfo,
+	.get_settings = ltq_etop_get_settings,
+	.set_settings = ltq_etop_set_settings,
+	.nway_reset = ltq_etop_nway_reset,
+};
+
+static int
+ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+{
+	u32 val = MDIO_REQUEST |
+		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
+		phy_data;
+
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	ltq_etop_w32(val, LTQ_ETOP_MDIO);
+	return 0;
+}
+
+static int
+ltq_etop_mdio_rd(struct mii_bus *bus, int phy_addr, int phy_reg)
+{
+	u32 val = MDIO_REQUEST | MDIO_READ |
+		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
+
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	ltq_etop_w32(val, LTQ_ETOP_MDIO);
+	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
+		;
+	val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
+	return val;
+}
+
+static void
+ltq_etop_mdio_link(struct net_device *dev)
+{
+	/* nothing to do  */
+}
+
+static int
+ltq_etop_mdio_probe(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	int phy_addr;
+
+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+		if (priv->mii_bus->phy_map[phy_addr]) {
+			phydev = priv->mii_bus->phy_map[phy_addr];
+			break;
+		}
+	}
+
+	if (!phydev) {
+		netdev_err(dev, "no PHY found\n");
+		return -ENODEV;
+	}
+
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &ltq_etop_mdio_link,
+			0, priv->pldata->mii_mode);
+
+	if (IS_ERR(phydev)) {
+		netdev_err(dev, "Could not attach to PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	phydev->supported &= (SUPPORTED_10baseT_Half
+			      | SUPPORTED_10baseT_Full
+			      | SUPPORTED_100baseT_Half
+			      | SUPPORTED_100baseT_Full
+			      | SUPPORTED_Autoneg
+			      | SUPPORTED_MII
+			      | SUPPORTED_TP);
+
+	phydev->advertising = phydev->supported;
+	priv->phydev = phydev;
+	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+	       dev->name, phydev->drv->name,
+	       dev_name(&phydev->dev), phydev->irq);
+
+	return 0;
+}
+
+static int
+ltq_etop_mdio_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+	int err;
+
+	priv->mii_bus = mdiobus_alloc();
+	if (!priv->mii_bus) {
+		netdev_err(dev, "failed to allocate mii bus\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	priv->mii_bus->priv = dev;
+	priv->mii_bus->read = ltq_etop_mdio_rd;
+	priv->mii_bus->write = ltq_etop_mdio_wr;
+	priv->mii_bus->name = "ltq_mii";
+	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+	priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!priv->mii_bus->irq) {
+		err = -ENOMEM;
+		goto err_out_free_mdiobus;
+	}
+
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		priv->mii_bus->irq[i] = PHY_POLL;
+
+	if (mdiobus_register(priv->mii_bus)) {
+		err = -ENXIO;
+		goto err_out_free_mdio_irq;
+	}
+
+	if (ltq_etop_mdio_probe(dev)) {
+		err = -ENXIO;
+		goto err_out_unregister_bus;
+	}
+	return 0;
+
+err_out_unregister_bus:
+	mdiobus_unregister(priv->mii_bus);
+err_out_free_mdio_irq:
+	kfree(priv->mii_bus->irq);
+err_out_free_mdiobus:
+	mdiobus_free(priv->mii_bus);
+err_out:
+	return err;
+}
+
+static void
+ltq_etop_mdio_cleanup(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	phy_disconnect(priv->phydev);
+	mdiobus_unregister(priv->mii_bus);
+	kfree(priv->mii_bus->irq);
+	mdiobus_free(priv->mii_bus);
+}
+
+static int
+ltq_etop_open(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		if (!IS_TX(i) && (!IS_RX(i)))
+			continue;
+		ltq_dma_open(&ch->dma);
+		napi_enable(&ch->napi);
+	}
+	phy_start(priv->phydev);
+	netif_tx_start_all_queues(dev);
+	return 0;
+}
+
+static int
+ltq_etop_stop(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	int i;
+
+	netif_tx_stop_all_queues(dev);
+	phy_stop(priv->phydev);
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		struct ltq_etop_chan *ch = &priv->ch[i];
+
+		if (!IS_RX(i) && !IS_TX(i))
+			continue;
+		napi_disable(&ch->napi);
+		ltq_dma_close(&ch->dma);
+	}
+	return 0;
+}
+
+static int
+ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	int queue = skb_get_queue_mapping(skb);
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+	int len;
+	unsigned long flags;
+	u32 byte_offset;
+
+	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+		dev_kfree_skb_any(skb);
+		netdev_err(dev, "tx ring full\n");
+		netif_tx_stop_queue(txq);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* dma needs to start on a 16 byte aligned address */
+	byte_offset = CPHYSADDR(skb->data) % 16;
+	ch->skb[ch->dma.desc] = skb;
+
+	dev->trans_start = jiffies;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
+						DMA_TO_DEVICE)) - byte_offset;
+	wmb();
+	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+	ch->dma.desc++;
+	ch->dma.desc %= LTQ_DESC_NUM;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
+		netif_tx_stop_queue(txq);
+
+	return NETDEV_TX_OK;
+}
+
+static int
+ltq_etop_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int ret = eth_change_mtu(dev, new_mtu);
+
+	if (!ret) {
+		struct ltq_etop_priv *priv = netdev_priv(dev);
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
+			LTQ_ETOP_IGPLEN);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	return ret;
+}
+
+static int
+ltq_etop_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+
+	/* TODO: mii-toll reports "No MII transceiver present!." ?!*/
+	return phy_mii_ioctl(priv->phydev, rq, cmd);
+}
+
+static int
+ltq_etop_set_mac_address(struct net_device *dev, void *p)
+{
+	int ret = eth_mac_addr(dev, p);
+
+	if (!ret) {
+		struct ltq_etop_priv *priv = netdev_priv(dev);
+		unsigned long flags;
+
+		/* store the mac for the unicast filter */
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_etop_w32(*((u32 *)dev->dev_addr), LTQ_ETOP_MAC_DA0);
+		ltq_etop_w32(*((u16 *)&dev->dev_addr[4]) << 16,
+			LTQ_ETOP_MAC_DA1);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	return ret;
+}
+
+static void
+ltq_etop_set_multicast_list(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	/* ensure that the unicast filter is not enabled in promiscious mode */
+	spin_lock_irqsave(&priv->lock, flags);
+	if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI))
+		ltq_etop_w32_mask(ETOP_FTCU, 0, LTQ_ETOP_ENETS0);
+	else
+		ltq_etop_w32_mask(0, ETOP_FTCU, LTQ_ETOP_ENETS0);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static u16
+ltq_etop_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	/* we are currently only using the first queue */
+	return 0;
+}
+
+static int
+ltq_etop_init(struct net_device *dev)
+{
+	struct ltq_etop_priv *priv = netdev_priv(dev);
+	struct sockaddr mac;
+	int err;
+
+	ether_setup(dev);
+	dev->watchdog_timeo = 10 * HZ;
+	err = ltq_etop_hw_init(dev);
+	if (err)
+		goto err_hw;
+	ltq_etop_change_mtu(dev, 1500);
+
+	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+	if (!is_valid_ether_addr(mac.sa_data)) {
+		pr_warn("etop: invalid MAC, using random\n");
+		random_ether_addr(mac.sa_data);
+	}
+
+	err = ltq_etop_set_mac_address(dev, &mac);
+	if (err)
+		goto err_netdev;
+	ltq_etop_set_multicast_list(dev);
+	err = ltq_etop_mdio_init(dev);
+	if (err)
+		goto err_netdev;
+	return 0;
+
+err_netdev:
+	unregister_netdev(dev);
+	free_netdev(dev);
+err_hw:
+	ltq_etop_hw_exit(dev);
+	return err;
+}
+
+static void
+ltq_etop_tx_timeout(struct net_device *dev)
+{
+	int err;
+
+	ltq_etop_hw_exit(dev);
+	err = ltq_etop_hw_init(dev);
+	if (err)
+		goto err_hw;
+	dev->trans_start = jiffies;
+	netif_wake_queue(dev);
+	return;
+
+err_hw:
+	ltq_etop_hw_exit(dev);
+	netdev_err(dev, "failed to restart etop after TX timeout\n");
+}
+
+static const struct net_device_ops ltq_eth_netdev_ops = {
+	.ndo_open = ltq_etop_open,
+	.ndo_stop = ltq_etop_stop,
+	.ndo_start_xmit = ltq_etop_tx,
+	.ndo_change_mtu = ltq_etop_change_mtu,
+	.ndo_do_ioctl = ltq_etop_ioctl,
+	.ndo_set_mac_address = ltq_etop_set_mac_address,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_set_multicast_list = ltq_etop_set_multicast_list,
+	.ndo_select_queue = ltq_etop_select_queue,
+	.ndo_init = ltq_etop_init,
+	.ndo_tx_timeout = ltq_etop_tx_timeout,
+};
+
+static int __init
+ltq_etop_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct ltq_etop_priv *priv;
+	struct resource *res;
+	int err;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get etop resource\n");
+		err = -ENOENT;
+		goto err_out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request etop resource\n");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	ltq_etop_membase = devm_ioremap_nocache(&pdev->dev,
+		res->start, resource_size(res));
+	if (!ltq_etop_membase) {
+		dev_err(&pdev->dev, "failed to remap etop engine %d\n",
+			pdev->id);
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+	strcpy(dev->name, "eth%d");
+	dev->netdev_ops = &ltq_eth_netdev_ops;
+	dev->ethtool_ops = &ltq_etop_ethtool_ops;
+	priv = netdev_priv(dev);
+	priv->res = res;
+	priv->pldata = dev_get_platdata(&pdev->dev);
+	priv->netdev = dev;
+	spin_lock_init(&priv->lock);
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		if (IS_TX(i))
+			netif_napi_add(dev, &priv->ch[i].napi,
+				ltq_etop_poll_tx, 8);
+		else if (IS_RX(i))
+			netif_napi_add(dev, &priv->ch[i].napi,
+				ltq_etop_poll_rx, 32);
+		priv->ch[i].netdev = dev;
+	}
+
+	err = register_netdev(dev);
+	if (err)
+		goto err_free;
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+
+err_free:
+	kfree(dev);
+err_out:
+	return err;
+}
+
+static int __devexit
+ltq_etop_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	if (dev) {
+		netif_tx_stop_all_queues(dev);
+		ltq_etop_hw_exit(dev);
+		ltq_etop_mdio_cleanup(dev);
+		unregister_netdev(dev);
+	}
+	return 0;
+}
+
+static struct platform_driver ltq_mii_driver = {
+	.remove = __devexit_p(ltq_etop_remove),
+	.driver = {
+		.name = "ltq_etop",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init
+init_ltq_etop(void)
+{
+	int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
+
+	if (ret)
+		pr_err("ltq_etop: Error registering platfom driver!");
+	return ret;
+}
+
+static void __exit
+exit_ltq_etop(void)
+{
+	platform_driver_unregister(&ltq_mii_driver);
+}
+
+module_init(init_ltq_etop);
+module_exit(exit_ltq_etop);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC ETOP");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index da74db4a03d..17b75e5f1b0 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -35,7 +35,7 @@
   Alexey Kuznetsov	: use the 8390's six bit hash multicast filter.
   Paul Gortmaker	: tweak ANK's above multicast changes a bit.
   Paul Gortmaker	: update packet statistics for v2.1.x
-  Alan Cox		: support arbitary stupid port mappings on the
+  Alan Cox		: support arbitrary stupid port mappings on the
   			  68K Macintosh. Support >16bit I/O spaces
   Paul Gortmaker	: add kmod support for auto-loading of the 8390
 			  module by all drivers that require it.
@@ -121,7 +121,7 @@ static void __NS8390_init(struct net_device *dev, int startp);
 /*
  *	SMP and the 8390 setup.
  *
- *	The 8390 isnt exactly designed to be multithreaded on RX/TX. There is
+ *	The 8390 isn't exactly designed to be multithreaded on RX/TX. There is
  *	a page register that controls bank and packet buffer access. We guard
  *	this with ei_local->page_lock. Nobody should assume or set the page other
  *	than zero when the lock is not held. Lock holders must restore page 0
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index ea0dc451da9..4ce9e5f2c06 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -173,7 +173,9 @@ static void loopback_setup(struct net_device *dev)
 		| NETIF_F_RXCSUM
 		| NETIF_F_HIGHDMA
 		| NETIF_F_LLTX
-		| NETIF_F_NETNS_LOCAL;
+		| NETIF_F_NETNS_LOCAL
+		| NETIF_F_VLAN_CHALLENGED
+		| NETIF_F_LOOPBACK;
 	dev->ethtool_ops	= &loopback_ethtool_ops;
 	dev->header_ops		= &eth_header_ops;
 	dev->netdev_ops		= &loopback_ops;
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index 3698824744c..385a95311cd 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -27,7 +27,7 @@
 
 	Credits:
 	Thanks to Murphy Software BV for letting me write this in their time.
-	Well, actually, I get payed doing this...
+	Well, actually, I get paid doing this...
 	(Also: see http://www.murphy.nl for murphy, and my homepage ~ard for
 	more information on the Professional Workstation)
 
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 79ccb54ab00..629bd2649c0 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -576,6 +576,11 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 		 * add that if/when we get our hands on a full-blown MII PHY.
 		 */
 
+		if (status & MACB_BIT(ISR_ROVR)) {
+			/* We missed at least one packet */
+			bp->hw_stats.rx_overruns++;
+		}
+
 		if (status & MACB_BIT(HRESP)) {
 			/*
 			 * TODO: Reset the hardware, and maybe move the printk
@@ -1024,7 +1029,8 @@ static struct net_device_stats *macb_get_stats(struct net_device *dev)
 				   hwstat->rx_jabbers +
 				   hwstat->rx_undersize_pkts +
 				   hwstat->rx_length_mismatch);
-	nstat->rx_over_errors = hwstat->rx_resource_errors;
+	nstat->rx_over_errors = hwstat->rx_resource_errors +
+				   hwstat->rx_overruns;
 	nstat->rx_crc_errors = hwstat->rx_fcs_errors;
 	nstat->rx_frame_errors = hwstat->rx_align_errors;
 	nstat->rx_fifo_errors = hwstat->rx_overruns;
@@ -1171,8 +1177,7 @@ static int __init macb_probe(struct platform_device *pdev)
 	}
 
 	dev->irq = platform_get_irq(pdev, 0);
-	err = request_irq(dev->irq, macb_interrupt, IRQF_SAMPLE_RANDOM,
-			  dev->name, dev);
+	err = request_irq(dev->irq, macb_interrupt, 0, dev->name, dev);
 	if (err) {
 		printk(KERN_ERR
 		       "%s: Unable to request IRQ %d (error %d)\n",
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 78e34e9e4f0..d72a70615c0 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -70,16 +70,17 @@ static void macvlan_hash_add(struct macvlan_dev *vlan)
 	hlist_add_head_rcu(&vlan->hlist, &port->vlan_hash[addr[5]]);
 }
 
-static void macvlan_hash_del(struct macvlan_dev *vlan)
+static void macvlan_hash_del(struct macvlan_dev *vlan, bool sync)
 {
 	hlist_del_rcu(&vlan->hlist);
-	synchronize_rcu();
+	if (sync)
+		synchronize_rcu();
 }
 
 static void macvlan_hash_change_addr(struct macvlan_dev *vlan,
 					const unsigned char *addr)
 {
-	macvlan_hash_del(vlan);
+	macvlan_hash_del(vlan, true);
 	/* Now that we are unhashed it is safe to change the device
 	 * address without confusing packet delivery.
 	 */
@@ -345,7 +346,7 @@ static int macvlan_stop(struct net_device *dev)
 	dev_uc_del(lowerdev, dev->dev_addr);
 
 hash_del:
-	macvlan_hash_del(vlan);
+	macvlan_hash_del(vlan, !dev->dismantle);
 	return 0;
 }
 
@@ -415,7 +416,7 @@ static struct lock_class_key macvlan_netdev_addr_lock_key;
 #define MACVLAN_FEATURES \
 	(NETIF_F_SG | NETIF_F_ALL_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
 	 NETIF_F_GSO | NETIF_F_TSO | NETIF_F_UFO | NETIF_F_GSO_ROBUST | \
-	 NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO)
+	 NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO | NETIF_F_RXCSUM)
 
 #define MACVLAN_STATE_MASK \
 	((1<<__LINK_STATE_NOCARRIER) | (1<<__LINK_STATE_DORMANT))
@@ -517,12 +518,6 @@ static void macvlan_ethtool_get_drvinfo(struct net_device *dev,
 	snprintf(drvinfo->version, 32, "0.1");
 }
 
-static u32 macvlan_ethtool_get_rx_csum(struct net_device *dev)
-{
-	const struct macvlan_dev *vlan = netdev_priv(dev);
-	return dev_ethtool_get_rx_csum(vlan->lowerdev);
-}
-
 static int macvlan_ethtool_get_settings(struct net_device *dev,
 					struct ethtool_cmd *cmd)
 {
@@ -530,18 +525,10 @@ static int macvlan_ethtool_get_settings(struct net_device *dev,
 	return dev_ethtool_get_settings(vlan->lowerdev, cmd);
 }
 
-static u32 macvlan_ethtool_get_flags(struct net_device *dev)
-{
-	const struct macvlan_dev *vlan = netdev_priv(dev);
-	return dev_ethtool_get_flags(vlan->lowerdev);
-}
-
 static const struct ethtool_ops macvlan_ethtool_ops = {
 	.get_link		= ethtool_op_get_link,
 	.get_settings		= macvlan_ethtool_get_settings,
-	.get_rx_csum		= macvlan_ethtool_get_rx_csum,
 	.get_drvinfo		= macvlan_ethtool_get_drvinfo,
-	.get_flags		= macvlan_ethtool_get_flags,
 };
 
 static const struct net_device_ops macvlan_netdev_ops = {
@@ -598,26 +585,18 @@ static int macvlan_port_create(struct net_device *dev)
 	err = netdev_rx_handler_register(dev, macvlan_handle_frame, port);
 	if (err)
 		kfree(port);
-
-	dev->priv_flags |= IFF_MACVLAN_PORT;
+	else
+		dev->priv_flags |= IFF_MACVLAN_PORT;
 	return err;
 }
 
-static void macvlan_port_rcu_free(struct rcu_head *head)
-{
-	struct macvlan_port *port;
-
-	port = container_of(head, struct macvlan_port, rcu);
-	kfree(port);
-}
-
 static void macvlan_port_destroy(struct net_device *dev)
 {
 	struct macvlan_port *port = macvlan_port_get(dev);
 
 	dev->priv_flags &= ~IFF_MACVLAN_PORT;
 	netdev_rx_handler_unregister(dev);
-	call_rcu(&port->rcu, macvlan_port_rcu_free);
+	kfree_rcu(port, rcu);
 }
 
 static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[])
@@ -799,6 +778,7 @@ static int macvlan_device_event(struct notifier_block *unused,
 	struct net_device *dev = ptr;
 	struct macvlan_dev *vlan, *next;
 	struct macvlan_port *port;
+	LIST_HEAD(list_kill);
 
 	if (!macvlan_port_exists(dev))
 		return NOTIFY_DONE;
@@ -824,7 +804,9 @@ static int macvlan_device_event(struct notifier_block *unused,
 			break;
 
 		list_for_each_entry_safe(vlan, next, &port->vlans, list)
-			vlan->dev->rtnl_link_ops->dellink(vlan->dev, NULL);
+			vlan->dev->rtnl_link_ops->dellink(vlan->dev, &list_kill);
+		unregister_netdevice_many(&list_kill);
+		list_del(&list_kill);
 		break;
 	case NETDEV_PRE_TYPE_CHANGE:
 		/* Forbid underlaying device to change its type. */
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index e85bf04cf81..16fbb11d92a 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -176,6 +176,9 @@ static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr)
  * @npage_adv: Modes currently advertised on next pages
  * @npage_lpa: Modes advertised by link partner on next pages
  *
+ * The @ecmd parameter is expected to have been cleared before calling
+ * mdio45_ethtool_gset_npage().
+ *
  * Since the CSRs for auto-negotiation using next pages are not fully
  * standardised, this function does not attempt to decode them.  The
  * caller must pass them in.
@@ -185,6 +188,7 @@ void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
 			       u32 npage_adv, u32 npage_lpa)
 {
 	int reg;
+	u32 speed;
 
 	ecmd->transceiver = XCVR_INTERNAL;
 	ecmd->phy_address = mdio->prtad;
@@ -287,33 +291,36 @@ void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
 		if (modes & (ADVERTISED_10000baseT_Full |
 			     ADVERTISED_10000baseKX4_Full |
 			     ADVERTISED_10000baseKR_Full)) {
-			ecmd->speed = SPEED_10000;
+			speed = SPEED_10000;
 			ecmd->duplex = DUPLEX_FULL;
 		} else if (modes & (ADVERTISED_1000baseT_Full |
 				    ADVERTISED_1000baseT_Half |
 				    ADVERTISED_1000baseKX_Full)) {
-			ecmd->speed = SPEED_1000;
+			speed = SPEED_1000;
 			ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half);
 		} else if (modes & (ADVERTISED_100baseT_Full |
 				    ADVERTISED_100baseT_Half)) {
-			ecmd->speed = SPEED_100;
+			speed = SPEED_100;
 			ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
 		} else {
-			ecmd->speed = SPEED_10;
+			speed = SPEED_10;
 			ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
 		}
 	} else {
 		/* Report forced settings */
 		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
 				      MDIO_CTRL1);
-		ecmd->speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) *
-			       ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
+		speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1)
+			 * ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
 		ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX ||
-				ecmd->speed == SPEED_10000);
+				speed == SPEED_10000);
 	}
 
+	ethtool_cmd_speed_set(ecmd, speed);
+
 	/* 10GBASE-T MDI/MDI-X */
-	if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) {
+	if (ecmd->port == PORT_TP
+	    && (ethtool_cmd_speed(ecmd) == SPEED_10000)) {
 		switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
 					MDIO_PMA_10GBT_SWAPPOL)) {
 		case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
index a78dc1ca8c2..5b145c6bad6 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/meth.h
@@ -144,7 +144,7 @@ typedef struct rx_packet {
 				       /* Bits 22 through 28 are used to determine IPGR2 */
 
 #define METH_REV_SHIFT 29       /* Bits 29 through 31 are used to determine the revision */
-				       /* 000: Inital revision */
+				       /* 000: Initial revision */
 				       /* 001: First revision, Improved TX concatenation */
 
 
@@ -193,7 +193,7 @@ typedef struct rx_packet {
 					      	/* 1: A TX message had the INT request bit set, the packet has been sent. */
 #define METH_INT_TX_LINK_FAIL	BIT(2)	/* 0: No interrupt pending, 1: PHY has reported a link failure */
 #define METH_INT_MEM_ERROR	BIT(3)	/* 0: No interrupt pending */
-						/* 1: A memory error occurred durring DMA, DMA stopped, Fatal */
+						/* 1: A memory error occurred during DMA, DMA stopped, Fatal */
 #define METH_INT_TX_ABORT		BIT(4)	/* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */
 #define METH_INT_RX_THRESHOLD	BIT(5)	/* 0: No interrupt pending, 1: Selected receive threshold condition Valid */
 #define METH_INT_RX_UNDERFLOW	BIT(6)	/* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index 0a6c6a2e755..c62e7816d54 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -49,6 +49,10 @@ static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
 		result |= ADVERTISED_100baseT_Half;
 	if (advert & ADVERTISE_100FULL)
 		result |= ADVERTISED_100baseT_Full;
+	if (advert & ADVERTISE_PAUSE_CAP)
+		result |= ADVERTISED_Pause;
+	if (advert & ADVERTISE_PAUSE_ASYM)
+		result |= ADVERTISED_Asym_Pause;
 
 	return result;
 }
@@ -58,6 +62,9 @@ static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
  * @mii: MII interface
  * @ecmd: requested ethtool_cmd
  *
+ * The @ecmd parameter is expected to have been cleared before calling
+ * mii_ethtool_gset().
+ *
  * Returns 0 for success, negative on error.
  */
 int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
@@ -118,22 +125,25 @@ int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 
 		if (nego & (ADVERTISED_1000baseT_Full |
 			    ADVERTISED_1000baseT_Half)) {
-			ecmd->speed = SPEED_1000;
+			ethtool_cmd_speed_set(ecmd, SPEED_1000);
 			ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
 		} else if (nego & (ADVERTISED_100baseT_Full |
 				   ADVERTISED_100baseT_Half)) {
-			ecmd->speed = SPEED_100;
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
 			ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
 		} else {
-			ecmd->speed = SPEED_10;
+			ethtool_cmd_speed_set(ecmd, SPEED_10);
 			ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
 		}
 	} else {
 		ecmd->autoneg = AUTONEG_DISABLE;
 
-		ecmd->speed = ((bmcr & BMCR_SPEED1000 &&
-				(bmcr & BMCR_SPEED100) == 0) ? SPEED_1000 :
-			       (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10);
+		ethtool_cmd_speed_set(ecmd,
+				      ((bmcr & BMCR_SPEED1000 &&
+					(bmcr & BMCR_SPEED100) == 0) ?
+				       SPEED_1000 :
+				       ((bmcr & BMCR_SPEED100) ?
+					SPEED_100 : SPEED_10)));
 		ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 	}
 
@@ -154,10 +164,11 @@ int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 {
 	struct net_device *dev = mii->dev;
+	u32 speed = ethtool_cmd_speed(ecmd);
 
-	if (ecmd->speed != SPEED_10 &&
-	    ecmd->speed != SPEED_100 &&
-	    ecmd->speed != SPEED_1000)
+	if (speed != SPEED_10 &&
+	    speed != SPEED_100 &&
+	    speed != SPEED_1000)
 		return -EINVAL;
 	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
 		return -EINVAL;
@@ -169,7 +180,7 @@ int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 		return -EINVAL;
 	if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
 		return -EINVAL;
-	if ((ecmd->speed == SPEED_1000) && (!mii->supports_gmii))
+	if ((speed == SPEED_1000) && (!mii->supports_gmii))
 		return -EINVAL;
 
 	/* ignore supported, maxtxpkt, maxrxpkt */
@@ -227,9 +238,9 @@ int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 		bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
 		tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
 			       BMCR_SPEED1000 | BMCR_FULLDPLX);
-		if (ecmd->speed == SPEED_1000)
+		if (speed == SPEED_1000)
 			tmp |= BMCR_SPEED1000;
-		else if (ecmd->speed == SPEED_100)
+		else if (speed == SPEED_100)
 			tmp |= BMCR_SPEED100;
 		if (ecmd->duplex == DUPLEX_FULL) {
 			tmp |= BMCR_FULLDPLX;
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index d54b7abf022..2e858e4dcf4 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -57,37 +57,6 @@ mlx4_en_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
 	drvinfo->eedump_len = 0;
 }
 
-static u32 mlx4_en_get_tso(struct net_device *dev)
-{
-	return (dev->features & NETIF_F_TSO) != 0;
-}
-
-static int mlx4_en_set_tso(struct net_device *dev, u32 data)
-{
-	struct mlx4_en_priv *priv = netdev_priv(dev);
-
-	if (data) {
-		if (!priv->mdev->LSO_support)
-			return -EPERM;
-		dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
-	} else
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-	return 0;
-}
-
-static u32 mlx4_en_get_rx_csum(struct net_device *dev)
-{
-	struct mlx4_en_priv *priv = netdev_priv(dev);
-	return priv->rx_csum;
-}
-
-static int mlx4_en_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct mlx4_en_priv *priv = netdev_priv(dev);
-	priv->rx_csum = (data != 0);
-	return 0;
-}
-
 static const char main_strings[][ETH_GSTRING_LEN] = {
 	"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
 	"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
@@ -296,10 +265,10 @@ static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	trans_type = priv->port_state.transciver;
 	if (netif_carrier_ok(dev)) {
-		cmd->speed = priv->port_state.link_speed;
+		ethtool_cmd_speed_set(cmd, priv->port_state.link_speed);
 		cmd->duplex = DUPLEX_FULL;
 	} else {
-		cmd->speed = -1;
+		ethtool_cmd_speed_set(cmd, -1);
 		cmd->duplex = -1;
 	}
 
@@ -323,7 +292,8 @@ static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 static int mlx4_en_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	if ((cmd->autoneg == AUTONEG_ENABLE) ||
-	    (cmd->speed != SPEED_10000) || (cmd->duplex != DUPLEX_FULL))
+	    (ethtool_cmd_speed(cmd) != SPEED_10000) ||
+	    (cmd->duplex != DUPLEX_FULL))
 		return -EINVAL;
 
 	/* Nothing to change */
@@ -483,17 +453,7 @@ const struct ethtool_ops mlx4_en_ethtool_ops = {
 	.get_drvinfo = mlx4_en_get_drvinfo,
 	.get_settings = mlx4_en_get_settings,
 	.set_settings = mlx4_en_set_settings,
-#ifdef NETIF_F_TSO
-	.get_tso = mlx4_en_get_tso,
-	.set_tso = mlx4_en_set_tso,
-#endif
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
 	.get_link = ethtool_op_get_link,
-	.get_rx_csum = mlx4_en_get_rx_csum,
-	.set_rx_csum = mlx4_en_set_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_ipv6_csum,
 	.get_strings = mlx4_en_get_strings,
 	.get_sset_count = mlx4_en_get_sset_count,
 	.get_ethtool_stats = mlx4_en_get_ethtool_stats,
@@ -508,7 +468,6 @@ const struct ethtool_ops mlx4_en_ethtool_ops = {
 	.set_pauseparam = mlx4_en_set_pauseparam,
 	.get_ringparam = mlx4_en_get_ringparam,
 	.set_ringparam = mlx4_en_set_ringparam,
-	.get_flags = ethtool_op_get_flags,
 };
 
 
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index 9317b61a75b..9276b1b2558 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -236,7 +236,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
 		goto err_mr;
 	}
 
-	/* Configure wich ports to start according to module parameters */
+	/* Configure which ports to start according to module parameters */
 	mdev->port_cnt = 0;
 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
 		mdev->port_cnt++;
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 4f158baa024..61850adae6f 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -247,7 +247,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 							       priv->port);
 			if (err)
 				en_err(priv, "Failed enabling "
-					     "promiscous mode\n");
+					     "promiscuous mode\n");
 
 			/* Disable port multicast filter (unconditionally) */
 			err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
@@ -276,7 +276,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 	}
 
 	/*
-	 * Not in promiscous mode
+	 * Not in promiscuous mode
 	 */
 
 	if (priv->flags & MLX4_EN_FLAG_PROMISC) {
@@ -292,14 +292,14 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 			err = mlx4_unicast_promisc_remove(mdev->dev, priv->base_qpn,
 							  priv->port);
 		if (err)
-			en_err(priv, "Failed disabling promiscous mode\n");
+			en_err(priv, "Failed disabling promiscuous mode\n");
 
 		/* Disable Multicast promisc */
 		if (priv->flags & MLX4_EN_FLAG_MC_PROMISC) {
 			err = mlx4_multicast_promisc_remove(mdev->dev, priv->base_qpn,
 							    priv->port);
 			if (err)
-				en_err(priv, "Failed disabling multicast promiscous mode\n");
+				en_err(priv, "Failed disabling multicast promiscuous mode\n");
 			priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC;
 		}
 
@@ -331,7 +331,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 			err = mlx4_multicast_promisc_remove(mdev->dev, priv->base_qpn,
 							    priv->port);
 			if (err)
-				en_err(priv, "Failed disabling multicast promiscous mode\n");
+				en_err(priv, "Failed disabling multicast promiscuous mode\n");
 			priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC;
 		}
 
@@ -1083,7 +1083,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	priv->prof = prof;
 	priv->port = port;
 	priv->port_up = false;
-	priv->rx_csum = 1;
 	priv->flags = prof->flags;
 	priv->tx_ring_num = prof->tx_ring_num;
 	priv->rx_ring_num = prof->rx_ring_num;
@@ -1141,21 +1140,16 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	/*
 	 * Set driver features
 	 */
-	dev->features |= NETIF_F_SG;
-	dev->vlan_features |= NETIF_F_SG;
-	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-	dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-	dev->features |= NETIF_F_HIGHDMA;
-	dev->features |= NETIF_F_HW_VLAN_TX |
-			 NETIF_F_HW_VLAN_RX |
-			 NETIF_F_HW_VLAN_FILTER;
-	dev->features |= NETIF_F_GRO;
-	if (mdev->LSO_support) {
-		dev->features |= NETIF_F_TSO;
-		dev->features |= NETIF_F_TSO6;
-		dev->vlan_features |= NETIF_F_TSO;
-		dev->vlan_features |= NETIF_F_TSO6;
-	}
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	if (mdev->LSO_support)
+		dev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6;
+
+	dev->vlan_features = dev->hw_features;
+
+	dev->hw_features |= NETIF_F_RXCSUM;
+	dev->features = dev->hw_features | NETIF_F_HIGHDMA |
+			NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
+			NETIF_F_HW_VLAN_FILTER;
 
 	mdev->pndev[port] = dev;
 
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 05998ee297c..277215fb9d7 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -345,6 +345,8 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
 		err = mlx4_en_init_allocator(priv, ring);
 		if (err) {
 			en_err(priv, "Failed initializing ring allocator\n");
+			if (ring->stride <= TXBB_SIZE)
+				ring->buf -= TXBB_SIZE;
 			ring_ind--;
 			goto err_allocator;
 		}
@@ -369,6 +371,8 @@ err_buffers:
 	ring_ind = priv->rx_ring_num - 1;
 err_allocator:
 	while (ring_ind >= 0) {
+		if (priv->rx_ring[ring_ind].stride <= TXBB_SIZE)
+			priv->rx_ring[ring_ind].buf -= TXBB_SIZE;
 		mlx4_en_destroy_allocator(priv, &priv->rx_ring[ring_ind]);
 		ring_ind--;
 	}
@@ -580,7 +584,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
 		ring->bytes += length;
 		ring->packets++;
 
-		if (likely(priv->rx_csum)) {
+		if (likely(dev->features & NETIF_F_RXCSUM)) {
 			if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&
 			    (cqe->checksum == cpu_to_be16(0xffff))) {
 				priv->port_stats.rx_chksum_good++;
@@ -706,7 +710,7 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget)
 }
 
 
-/* Calculate the last offset position that accomodates a full fragment
+/* Calculate the last offset position that accommodates a full fragment
  * (assuming fagment size = stride-align) */
 static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16 align)
 {
diff --git a/drivers/net/mlx4/en_selftest.c b/drivers/net/mlx4/en_selftest.c
index 9c91a92da70..191a8dcd8a9 100644
--- a/drivers/net/mlx4/en_selftest.c
+++ b/drivers/net/mlx4/en_selftest.c
@@ -149,7 +149,7 @@ void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf)
 
 		netif_carrier_off(dev);
 retry_tx:
-		/* Wait untill all tx queues are empty.
+		/* Wait until all tx queues are empty.
 		 * there should not be any additional incoming traffic
 		 * since we turned the carrier off */
 		msleep(200);
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 01feb8fd42a..b229acf1855 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -636,7 +636,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(!real_size))
 		goto tx_drop;
 
-	/* Allign descriptor to TXBB size */
+	/* Align descriptor to TXBB size */
 	desc_size = ALIGN(real_size, TXBB_SIZE);
 	nr_txbb = desc_size / TXBB_SIZE;
 	if (unlikely(nr_txbb > MAX_DESC_TXBBS)) {
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 62fa7eec5f0..3814fc9b114 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -944,6 +944,10 @@ static int mlx4_setup_hca(struct mlx4_dev *dev)
 	}
 
 	for (port = 1; port <= dev->caps.num_ports; port++) {
+		enum mlx4_port_type port_type = 0;
+		mlx4_SENSE_PORT(dev, port, &port_type);
+		if (port_type)
+			dev->caps.port_type[port] = port_type;
 		ib_port_default_caps = 0;
 		err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps);
 		if (err)
@@ -958,6 +962,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev)
 			goto err_mcg_table_free;
 		}
 	}
+	mlx4_set_port_mask(dev);
 
 	return 0;
 
diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index c6d336aed2d..e63c37d6a11 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -222,7 +222,7 @@ static int existing_steering_entry(struct mlx4_dev *dev, u8 vep_num, u8 port,
 
 	/* the given qpn is listed as a promisc qpn
 	 * we need to add it as a duplicate to this entry
-	 * for future refernce */
+	 * for future references */
 	list_for_each_entry(dqp, &entry->duplicates, list) {
 		if (qpn == dqp->qpn)
 			return 0; /* qp is already duplicated */
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index c1e0e5f1bcd..dd7d745fbab 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -431,6 +431,8 @@ void mlx4_srq_event(struct mlx4_dev *dev, u32 srqn, int event_type);
 
 void mlx4_handle_catas_err(struct mlx4_dev *dev);
 
+int mlx4_SENSE_PORT(struct mlx4_dev *dev, int port,
+		    enum mlx4_port_type *type);
 void mlx4_do_sense_ports(struct mlx4_dev *dev,
 			 enum mlx4_port_type *stype,
 			 enum mlx4_port_type *defaults);
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index e30f6099c0d..0b5150df058 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -451,7 +451,6 @@ struct mlx4_en_priv {
 	int registered;
 	int allocated;
 	int stride;
-	int rx_csum;
 	u64 mac;
 	int mac_index;
 	unsigned max_mtu;
diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c
index eca7d8596f8..8856659fb43 100644
--- a/drivers/net/mlx4/port.c
+++ b/drivers/net/mlx4/port.c
@@ -172,7 +172,7 @@ int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn, u8 wrap)
 		}
 
 		if (mac == (MLX4_MAC_MASK & be64_to_cpu(table->entries[i]))) {
-			/* MAC already registered, increase refernce count */
+			/* MAC already registered, increase references count */
 			++table->refs[i];
 			goto out;
 		}
@@ -360,7 +360,7 @@ int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index)
 		if (table->refs[i] &&
 		    (vlan == (MLX4_VLAN_MASK &
 			      be32_to_cpu(table->entries[i])))) {
-			/* Vlan already registered, increase refernce count */
+			/* Vlan already registered, increase references count */
 			*index = i;
 			++table->refs[i];
 			goto out;
diff --git a/drivers/net/mlx4/sense.c b/drivers/net/mlx4/sense.c
index 015fbe785c1..e2337a7411d 100644
--- a/drivers/net/mlx4/sense.c
+++ b/drivers/net/mlx4/sense.c
@@ -38,8 +38,8 @@
 
 #include "mlx4.h"
 
-static int mlx4_SENSE_PORT(struct mlx4_dev *dev, int port,
-			   enum mlx4_port_type *type)
+int mlx4_SENSE_PORT(struct mlx4_dev *dev, int port,
+		    enum mlx4_port_type *type)
 {
 	u64 out_param;
 	int err = 0;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 34425b94452..a5d9b1c310b 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1444,13 +1444,13 @@ mv643xx_eth_get_settings_phyless(struct mv643xx_eth_private *mp,
 	cmd->advertising = ADVERTISED_MII;
 	switch (port_status & PORT_SPEED_MASK) {
 	case PORT_SPEED_10:
-		cmd->speed = SPEED_10;
+		ethtool_cmd_speed_set(cmd, SPEED_10);
 		break;
 	case PORT_SPEED_100:
-		cmd->speed = SPEED_100;
+		ethtool_cmd_speed_set(cmd, SPEED_100);
 		break;
 	case PORT_SPEED_1000:
-		cmd->speed = SPEED_1000;
+		ethtool_cmd_speed_set(cmd, SPEED_1000);
 		break;
 	default:
 		cmd->speed = -1;
@@ -1575,18 +1575,12 @@ mv643xx_eth_set_ringparam(struct net_device *dev, struct ethtool_ringparam *er)
 	return 0;
 }
 
-static u32
-mv643xx_eth_get_rx_csum(struct net_device *dev)
-{
-	struct mv643xx_eth_private *mp = netdev_priv(dev);
-
-	return !!(rdlp(mp, PORT_CONFIG) & 0x02000000);
-}
 
 static int
-mv643xx_eth_set_rx_csum(struct net_device *dev, u32 rx_csum)
+mv643xx_eth_set_features(struct net_device *dev, u32 features)
 {
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
+	u32 rx_csum = features & NETIF_F_RXCSUM;
 
 	wrlp(mp, PORT_CONFIG, rx_csum ? 0x02000000 : 0x00000000);
 
@@ -1634,11 +1628,6 @@ static void mv643xx_eth_get_ethtool_stats(struct net_device *dev,
 	}
 }
 
-static int mv643xx_eth_set_flags(struct net_device *dev, u32 data)
-{
-	return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO);
-}
-
 static int mv643xx_eth_get_sset_count(struct net_device *dev, int sset)
 {
 	if (sset == ETH_SS_STATS)
@@ -1657,14 +1646,8 @@ static const struct ethtool_ops mv643xx_eth_ethtool_ops = {
 	.set_coalesce		= mv643xx_eth_set_coalesce,
 	.get_ringparam		= mv643xx_eth_get_ringparam,
 	.set_ringparam		= mv643xx_eth_set_ringparam,
-	.get_rx_csum		= mv643xx_eth_get_rx_csum,
-	.set_rx_csum		= mv643xx_eth_set_rx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_csum,
-	.set_sg			= ethtool_op_set_sg,
 	.get_strings		= mv643xx_eth_get_strings,
 	.get_ethtool_stats	= mv643xx_eth_get_ethtool_stats,
-	.get_flags		= ethtool_op_get_flags,
-	.set_flags		= mv643xx_eth_set_flags,
 	.get_sset_count		= mv643xx_eth_get_sset_count,
 };
 
@@ -2264,7 +2247,7 @@ static void port_start(struct mv643xx_eth_private *mp)
 	 * frames to RX queue #0, and include the pseudo-header when
 	 * calculating receive checksums.
 	 */
-	wrlp(mp, PORT_CONFIG, 0x02000000);
+	mv643xx_eth_set_features(mp->dev, mp->dev->features);
 
 	/*
 	 * Treat BPDUs as normal multicasts, and disable partition mode.
@@ -2848,6 +2831,7 @@ static const struct net_device_ops mv643xx_eth_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= mv643xx_eth_ioctl,
 	.ndo_change_mtu		= mv643xx_eth_change_mtu,
+	.ndo_set_features	= mv643xx_eth_set_features,
 	.ndo_tx_timeout		= mv643xx_eth_tx_timeout,
 	.ndo_get_stats		= mv643xx_eth_get_stats,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2930,7 +2914,9 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	dev->watchdog_timeo = 2 * HZ;
 	dev->base_addr = 0;
 
-	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+		NETIF_F_RXCSUM | NETIF_F_LRO;
+	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
 	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM;
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 673dc600c89..b1358f79ba0 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -205,7 +205,6 @@ struct myri10ge_priv {
 	int tx_boundary;	/* boundary transmits cannot cross */
 	int num_slices;
 	int running;		/* running?             */
-	int csum_flag;		/* rx_csums?            */
 	int small_bytes;
 	int big_bytes;
 	int max_intr_slots;
@@ -1386,7 +1385,7 @@ myri10ge_rx_done(struct myri10ge_slice_state *ss, int len, __wsum csum,
 	skb->protocol = eth_type_trans(skb, dev);
 	skb_record_rx_queue(skb, ss - &mgp->ss[0]);
 
-	if (mgp->csum_flag) {
+	if (dev->features & NETIF_F_RXCSUM) {
 		if ((skb->protocol == htons(ETH_P_IP)) ||
 		    (skb->protocol == htons(ETH_P_IPV6))) {
 			skb->csum = csum;
@@ -1645,7 +1644,7 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
 	int i;
 
 	cmd->autoneg = AUTONEG_DISABLE;
-	cmd->speed = SPEED_10000;
+	ethtool_cmd_speed_set(cmd, SPEED_10000);
 	cmd->duplex = DUPLEX_FULL;
 
 	/*
@@ -1757,43 +1756,6 @@ myri10ge_get_ringparam(struct net_device *netdev,
 	ring->tx_pending = ring->tx_max_pending;
 }
 
-static u32 myri10ge_get_rx_csum(struct net_device *netdev)
-{
-	struct myri10ge_priv *mgp = netdev_priv(netdev);
-
-	if (mgp->csum_flag)
-		return 1;
-	else
-		return 0;
-}
-
-static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
-{
-	struct myri10ge_priv *mgp = netdev_priv(netdev);
-	int err = 0;
-
-	if (csum_enabled)
-		mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
-	else {
-		netdev->features &= ~NETIF_F_LRO;
-		mgp->csum_flag = 0;
-
-	}
-	return err;
-}
-
-static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
-{
-	struct myri10ge_priv *mgp = netdev_priv(netdev);
-	u32 flags = mgp->features & (NETIF_F_TSO6 | NETIF_F_TSO);
-
-	if (tso_enabled)
-		netdev->features |= flags;
-	else
-		netdev->features &= ~flags;
-	return 0;
-}
-
 static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
 	"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
 	"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
@@ -1944,11 +1906,6 @@ static u32 myri10ge_get_msglevel(struct net_device *netdev)
 	return mgp->msg_enable;
 }
 
-static int myri10ge_set_flags(struct net_device *netdev, u32 value)
-{
-	return ethtool_op_set_flags(netdev, value, ETH_FLAG_LRO);
-}
-
 static const struct ethtool_ops myri10ge_ethtool_ops = {
 	.get_settings = myri10ge_get_settings,
 	.get_drvinfo = myri10ge_get_drvinfo,
@@ -1957,19 +1914,12 @@ static const struct ethtool_ops myri10ge_ethtool_ops = {
 	.get_pauseparam = myri10ge_get_pauseparam,
 	.set_pauseparam = myri10ge_set_pauseparam,
 	.get_ringparam = myri10ge_get_ringparam,
-	.get_rx_csum = myri10ge_get_rx_csum,
-	.set_rx_csum = myri10ge_set_rx_csum,
-	.set_tx_csum = ethtool_op_set_tx_hw_csum,
-	.set_sg = ethtool_op_set_sg,
-	.set_tso = myri10ge_set_tso,
 	.get_link = ethtool_op_get_link,
 	.get_strings = myri10ge_get_strings,
 	.get_sset_count = myri10ge_get_sset_count,
 	.get_ethtool_stats = myri10ge_get_ethtool_stats,
 	.set_msglevel = myri10ge_set_msglevel,
 	.get_msglevel = myri10ge_get_msglevel,
-	.get_flags = ethtool_op_get_flags,
-	.set_flags = myri10ge_set_flags
 };
 
 static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
@@ -3136,6 +3086,14 @@ static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
 	return 0;
 }
 
+static u32 myri10ge_fix_features(struct net_device *dev, u32 features)
+{
+	if (!(features & NETIF_F_RXCSUM))
+		features &= ~NETIF_F_LRO;
+
+	return features;
+}
+
 static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct myri10ge_priv *mgp = netdev_priv(dev);
@@ -3702,7 +3660,7 @@ abort:
 
 /*
  * This function determines the number of slices supported.
- * The number slices is the minumum of the number of CPUS,
+ * The number slices is the minimum of the number of CPUS,
  * the number of MSI-X irqs supported, the number of slices
  * supported by the firmware
  */
@@ -3834,6 +3792,7 @@ static const struct net_device_ops myri10ge_netdev_ops = {
 	.ndo_get_stats		= myri10ge_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= myri10ge_change_mtu,
+	.ndo_fix_features	= myri10ge_fix_features,
 	.ndo_set_multicast_list = myri10ge_set_multicast_list,
 	.ndo_set_mac_address	= myri10ge_set_mac_address,
 };
@@ -3860,7 +3819,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	mgp = netdev_priv(netdev);
 	mgp->dev = netdev;
 	mgp->pdev = pdev;
-	mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
 	mgp->pause = myri10ge_flow_control;
 	mgp->intr_coal_delay = myri10ge_intr_coal_delay;
 	mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
@@ -3976,11 +3934,11 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->netdev_ops = &myri10ge_netdev_ops;
 	netdev->mtu = myri10ge_initial_mtu;
 	netdev->base_addr = mgp->iomem_base;
-	netdev->features = mgp->features;
+	netdev->hw_features = mgp->features | NETIF_F_LRO | NETIF_F_RXCSUM;
+	netdev->features = netdev->hw_features;
 
 	if (dac_enabled)
 		netdev->features |= NETIF_F_HIGHDMA;
-	netdev->features |= NETIF_F_LRO;
 
 	netdev->vlan_features |= mgp->features;
 	if (mgp->fw_ver_tiny < 37)
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index a761076b69c..53aeea4b536 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -1009,7 +1009,7 @@ static int __devinit myri_sbus_probe(struct platform_device *op)
 
 	/* Map in the MyriCOM register/localram set. */
 	if (mp->eeprom.cpuvers < CPUVERS_4_0) {
-		/* XXX Makes no sense, if control reg is non-existant this
+		/* XXX Makes no sense, if control reg is non-existent this
 		 * XXX driver cannot function at all... maybe pre-4.0 is
 		 * XXX only a valid version for PCI cards?  Ask feldy...
 		 */
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 2fd39630b1e..b78be088c4a 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -203,7 +203,7 @@ skbuff at an offset of "+2", 16-byte aligning the IP header.
 IIId. Synchronization
 
 Most operations are synchronized on the np->lock irq spinlock, except the
-recieve and transmit paths which are synchronised using a combination of
+receive and transmit paths which are synchronised using a combination of
 hardware descriptor ownership, disabling interrupts and NAPI poll scheduling.
 
 IVb. References
@@ -726,7 +726,7 @@ static void move_int_phy(struct net_device *dev, int addr)
 	 * There are two addresses we must avoid:
 	 * - the address on the external phy that is used for transmission.
 	 * - the address that we want to access. User space can access phys
-	 *   on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independant from the
+	 *   on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independent from the
 	 *   phy that is used for transmission.
 	 */
 
@@ -860,6 +860,9 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
 		prev_eedata = eedata;
 	}
 
+	/* Store MAC Address in perm_addr */
+	memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
+
 	dev->base_addr = (unsigned long __force) ioaddr;
 	dev->irq = irq;
 
@@ -1982,7 +1985,7 @@ static void init_ring(struct net_device *dev)
 
 	np->rx_head_desc = &np->rx_ring[0];
 
-	/* Please be carefull before changing this loop - at least gcc-2.95.1
+	/* Please be careful before changing this loop - at least gcc-2.95.1
 	 * miscompiles it otherwise.
 	 */
 	/* Initialize all Rx descriptors. */
@@ -2817,7 +2820,7 @@ static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 	u32 tmp;
 
 	ecmd->port        = dev->if_port;
-	ecmd->speed       = np->speed;
+	ethtool_cmd_speed_set(ecmd, np->speed);
 	ecmd->duplex      = np->duplex;
 	ecmd->autoneg     = np->autoneg;
 	ecmd->advertising = 0;
@@ -2875,9 +2878,9 @@ static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 		tmp = mii_nway_result(
 			np->advertising & mdio_read(dev, MII_LPA));
 		if (tmp == LPA_100FULL || tmp == LPA_100HALF)
-			ecmd->speed  = SPEED_100;
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
 		else
-			ecmd->speed  = SPEED_10;
+			ethtool_cmd_speed_set(ecmd, SPEED_10);
 		if (tmp == LPA_100FULL || tmp == LPA_10FULL)
 			ecmd->duplex = DUPLEX_FULL;
 		else
@@ -2905,7 +2908,8 @@ static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 			return -EINVAL;
 		}
 	} else if (ecmd->autoneg == AUTONEG_DISABLE) {
-		if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+		u32 speed = ethtool_cmd_speed(ecmd);
+		if (speed != SPEED_10 && speed != SPEED_100)
 			return -EINVAL;
 		if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
 			return -EINVAL;
@@ -2953,7 +2957,7 @@ static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 		if (ecmd->advertising & ADVERTISED_100baseT_Full)
 			np->advertising |= ADVERTISE_100FULL;
 	} else {
-		np->speed  = ecmd->speed;
+		np->speed  = ethtool_cmd_speed(ecmd);
 		np->duplex = ecmd->duplex;
 		/* user overriding the initial full duplex parm? */
 		if (np->duplex == DUPLEX_HALF)
diff --git a/drivers/net/ne-h8300.c b/drivers/net/ne-h8300.c
index 30be8c634eb..7298a34bc79 100644
--- a/drivers/net/ne-h8300.c
+++ b/drivers/net/ne-h8300.c
@@ -167,7 +167,7 @@ static void cleanup_card(struct net_device *dev)
 #ifndef MODULE
 struct net_device * __init ne_probe(int unit)
 {
-	struct net_device *dev = alloc_ei_netdev();
+	struct net_device *dev = ____alloc_ei_netdev(0);
 	int err;
 
 	if (!dev)
@@ -197,15 +197,15 @@ static const struct net_device_ops ne_netdev_ops = {
 	.ndo_open		= ne_open,
 	.ndo_stop		= ne_close,
 
-	.ndo_start_xmit		= ei_start_xmit,
-	.ndo_tx_timeout		= ei_tx_timeout,
-	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_start_xmit		= __ei_start_xmit,
+	.ndo_tx_timeout		= __ei_tx_timeout,
+	.ndo_get_stats		= __ei_get_stats,
+	.ndo_set_multicast_list = __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= ei_poll,
+	.ndo_poll_controller	= __ei_poll,
 #endif
 };
 
@@ -637,7 +637,7 @@ int init_module(void)
 	int err;
 
 	for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
-		struct net_device *dev = alloc_ei_netdev();
+		struct net_device *dev = ____alloc_ei_netdev(0);
 		if (!dev)
 			break;
 		if (io[this_dev]) {
diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
index 243ed2aee88..e8984b0ca52 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ne3210.c
@@ -80,17 +80,20 @@ static void ne3210_block_output(struct net_device *dev, int count, const unsigne
 
 #define NE3210_DEBUG	0x0
 
-static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3};
-static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0};
-static const char *ifmap[] __initdata = {"UTP", "?", "BNC", "AUI"};
-static int ifmap_val[] __initdata = {
+static const unsigned char irq_map[] __devinitconst =
+	{ 15, 12, 11, 10, 9, 7, 5, 3 };
+static const unsigned int shmem_map[] __devinitconst =
+	{ 0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0 };
+static const char *const ifmap[] __devinitconst =
+	{ "UTP", "?", "BNC", "AUI" };
+static const int ifmap_val[] __devinitconst = {
 		IF_PORT_10BASET,
 		IF_PORT_UNKNOWN,
 		IF_PORT_10BASE2,
 		IF_PORT_AUI,
 };
 
-static int __init ne3210_eisa_probe (struct device *device)
+static int __devinit ne3210_eisa_probe (struct device *device)
 {
 	unsigned long ioaddr, phys_mem;
 	int i, retval, port_index;
@@ -313,7 +316,7 @@ static void ne3210_block_output(struct net_device *dev, int count,
 	memcpy_toio(shmem, buf, count);
 }
 
-static struct eisa_device_id ne3210_ids[] = {
+static const struct eisa_device_id ne3210_ids[] __devinitconst = {
 	{ "EGL0101" },
 	{ "NVL1801" },
 	{ "" },
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index dfb67eb2a94..a83e101440f 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -242,34 +242,6 @@ static struct netconsole_target *to_target(struct config_item *item)
 }
 
 /*
- * Wrapper over simple_strtol (base 10) with sanity and range checking.
- * We return (signed) long only because we may want to return errors.
- * Do not use this to convert numbers that are allowed to be negative.
- */
-static long strtol10_check_range(const char *cp, long min, long max)
-{
-	long ret;
-	char *p = (char *) cp;
-
-	WARN_ON(min < 0);
-	WARN_ON(max < min);
-
-	ret = simple_strtol(p, &p, 10);
-
-	if (*p && (*p != '\n')) {
-		printk(KERN_ERR "netconsole: invalid input\n");
-		return -EINVAL;
-	}
-	if ((ret < min) || (ret > max)) {
-		printk(KERN_ERR "netconsole: input %ld must be between "
-				"%ld and %ld\n", ret, min, max);
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-/*
  * Attribute operations for netconsole_target.
  */
 
@@ -327,12 +299,14 @@ static ssize_t store_enabled(struct netconsole_target *nt,
 			     const char *buf,
 			     size_t count)
 {
+	int enabled;
 	int err;
-	long enabled;
 
-	enabled = strtol10_check_range(buf, 0, 1);
-	if (enabled < 0)
-		return enabled;
+	err = kstrtoint(buf, 10, &enabled);
+	if (err < 0)
+		return err;
+	if (enabled < 0 || enabled > 1)
+		return -EINVAL;
 
 	if (enabled) {	/* 1 */
 
@@ -384,8 +358,7 @@ static ssize_t store_local_port(struct netconsole_target *nt,
 				const char *buf,
 				size_t count)
 {
-	long local_port;
-#define __U16_MAX	((__u16) ~0U)
+	int rv;
 
 	if (nt->enabled) {
 		printk(KERN_ERR "netconsole: target (%s) is enabled, "
@@ -394,12 +367,9 @@ static ssize_t store_local_port(struct netconsole_target *nt,
 		return -EINVAL;
 	}
 
-	local_port = strtol10_check_range(buf, 0, __U16_MAX);
-	if (local_port < 0)
-		return local_port;
-
-	nt->np.local_port = local_port;
-
+	rv = kstrtou16(buf, 10, &nt->np.local_port);
+	if (rv < 0)
+		return rv;
 	return strnlen(buf, count);
 }
 
@@ -407,8 +377,7 @@ static ssize_t store_remote_port(struct netconsole_target *nt,
 				 const char *buf,
 				 size_t count)
 {
-	long remote_port;
-#define __U16_MAX	((__u16) ~0U)
+	int rv;
 
 	if (nt->enabled) {
 		printk(KERN_ERR "netconsole: target (%s) is enabled, "
@@ -417,12 +386,9 @@ static ssize_t store_remote_port(struct netconsole_target *nt,
 		return -EINVAL;
 	}
 
-	remote_port = strtol10_check_range(buf, 0, __U16_MAX);
-	if (remote_port < 0)
-		return remote_port;
-
-	nt->np.remote_port = remote_port;
-
+	rv = kstrtou16(buf, 10, &nt->np.remote_port);
+	if (rv < 0)
+		return rv;
 	return strnlen(buf, count);
 }
 
@@ -463,8 +429,6 @@ static ssize_t store_remote_mac(struct netconsole_target *nt,
 				size_t count)
 {
 	u8 remote_mac[ETH_ALEN];
-	char *p = (char *) buf;
-	int i;
 
 	if (nt->enabled) {
 		printk(KERN_ERR "netconsole: target (%s) is enabled, "
@@ -473,23 +437,13 @@ static ssize_t store_remote_mac(struct netconsole_target *nt,
 		return -EINVAL;
 	}
 
-	for (i = 0; i < ETH_ALEN - 1; i++) {
-		remote_mac[i] = simple_strtoul(p, &p, 16);
-		if (*p != ':')
-			goto invalid;
-		p++;
-	}
-	remote_mac[ETH_ALEN - 1] = simple_strtoul(p, &p, 16);
-	if (*p && (*p != '\n'))
-		goto invalid;
-
+	if (!mac_pton(buf, remote_mac))
+		return -EINVAL;
+	if (buf[3 * ETH_ALEN - 1] && buf[3 * ETH_ALEN - 1] != '\n')
+		return -EINVAL;
 	memcpy(nt->np.remote_mac, remote_mac, ETH_ALEN);
 
 	return strnlen(buf, count);
-
-invalid:
-	printk(KERN_ERR "netconsole: invalid input\n");
-	return -EINVAL;
 }
 
 /*
@@ -671,6 +625,7 @@ static int netconsole_netdev_event(struct notifier_block *this,
 		goto done;
 
 	spin_lock_irqsave(&target_list_lock, flags);
+restart:
 	list_for_each_entry(nt, &target_list, list) {
 		netconsole_target_get(nt);
 		if (nt->np.dev == dev) {
@@ -683,9 +638,16 @@ static int netconsole_netdev_event(struct notifier_block *this,
 				 * rtnl_lock already held
 				 */
 				if (nt->np.dev) {
+					spin_unlock_irqrestore(
+							      &target_list_lock,
+							      flags);
 					__netpoll_cleanup(&nt->np);
+					spin_lock_irqsave(&target_list_lock,
+							  flags);
 					dev_put(nt->np.dev);
 					nt->np.dev = NULL;
+					netconsole_target_put(nt);
+					goto restart;
 				}
 				/* Fall through */
 			case NETDEV_GOING_DOWN:
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index d7299f1a494..77220687b92 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -174,7 +174,7 @@
 
 #define	MAX_NUM_CARDS		4
 
-#define MAX_BUFFERS_PER_CMD	32
+#define NETXEN_MAX_FRAGS_PER_TX	14
 #define MAX_TSO_HEADER_DESC	2
 #define MGMT_CMD_DESC_RESV	4
 #define TX_STOP_THRESH		((MAX_SKB_FRAGS >> 2) + MAX_TSO_HEADER_DESC \
@@ -558,7 +558,7 @@ struct netxen_recv_crb {
  */
 struct netxen_cmd_buffer {
 	struct sk_buff *skb;
-	struct netxen_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
+	struct netxen_skb_frag frag_array[MAX_SKB_FRAGS + 1];
 	u32 frag_count;
 };
 
@@ -1177,7 +1177,7 @@ struct netxen_adapter {
 	u8 max_sds_rings;
 	u8 driver_mismatch;
 	u8 msix_supported;
-	u8 rx_csum;
+	u8 __pad;
 	u8 pci_using_dac;
 	u8 portnum;
 	u8 physical_port;
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 3bdcc803ec6..b34fb74d07e 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -117,7 +117,7 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
 		ecmd->port = PORT_TP;
 
-		ecmd->speed = adapter->link_speed;
+		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 		ecmd->duplex = adapter->link_duplex;
 		ecmd->autoneg = adapter->link_autoneg;
 
@@ -134,7 +134,7 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		}
 
 		if (netif_running(dev) && adapter->has_link_events) {
-			ecmd->speed = adapter->link_speed;
+			ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 			ecmd->autoneg = adapter->link_autoneg;
 			ecmd->duplex = adapter->link_duplex;
 			goto skip;
@@ -146,10 +146,10 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 			u16 pcifn = adapter->ahw.pci_func;
 
 			val = NXRD32(adapter, P3_LINK_SPEED_REG(pcifn));
-			ecmd->speed = P3_LINK_SPEED_MHZ *
-					P3_LINK_SPEED_VAL(pcifn, val);
+			ethtool_cmd_speed_set(ecmd, P3_LINK_SPEED_MHZ *
+					      P3_LINK_SPEED_VAL(pcifn, val));
 		} else
-			ecmd->speed = SPEED_10000;
+			ethtool_cmd_speed_set(ecmd, SPEED_10000);
 
 		ecmd->duplex = DUPLEX_FULL;
 		ecmd->autoneg = AUTONEG_DISABLE;
@@ -251,6 +251,7 @@ static int
 netxen_nic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
+	u32 speed = ethtool_cmd_speed(ecmd);
 	int ret;
 
 	if (adapter->ahw.port_type != NETXEN_NIC_GBE)
@@ -259,14 +260,14 @@ netxen_nic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	if (!(adapter->capabilities & NX_FW_CAPABILITY_GBE_LINK_CFG))
 		return -EOPNOTSUPP;
 
-	ret = nx_fw_cmd_set_gbe_port(adapter, ecmd->speed, ecmd->duplex,
+	ret = nx_fw_cmd_set_gbe_port(adapter, speed, ecmd->duplex,
 				     ecmd->autoneg);
 	if (ret == NX_RCODE_NOT_SUPPORTED)
 		return -EOPNOTSUPP;
 	else if (ret)
 		return -EIO;
 
-	adapter->link_speed = ecmd->speed;
+	adapter->link_speed = speed;
 	adapter->link_duplex = ecmd->duplex;
 	adapter->link_autoneg = ecmd->autoneg;
 
@@ -676,62 +677,6 @@ netxen_nic_get_ethtool_stats(struct net_device *dev,
 	}
 }
 
-static u32 netxen_nic_get_tx_csum(struct net_device *dev)
-{
-	return dev->features & NETIF_F_IP_CSUM;
-}
-
-static u32 netxen_nic_get_rx_csum(struct net_device *dev)
-{
-	struct netxen_adapter *adapter = netdev_priv(dev);
-	return adapter->rx_csum;
-}
-
-static int netxen_nic_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct netxen_adapter *adapter = netdev_priv(dev);
-
-	if (data) {
-		adapter->rx_csum = data;
-		return 0;
-	}
-
-	if (dev->features & NETIF_F_LRO) {
-		if (netxen_config_hw_lro(adapter, NETXEN_NIC_LRO_DISABLED))
-			return -EIO;
-
-		dev->features &= ~NETIF_F_LRO;
-		netxen_send_lro_cleanup(adapter);
-		netdev_info(dev, "disabling LRO as rx_csum is off\n");
-	}
-	adapter->rx_csum = data;
-	return 0;
-}
-
-static u32 netxen_nic_get_tso(struct net_device *dev)
-{
-	struct netxen_adapter *adapter = netdev_priv(dev);
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		return (dev->features & (NETIF_F_TSO | NETIF_F_TSO6)) != 0;
-
-	return (dev->features & NETIF_F_TSO) != 0;
-}
-
-static int netxen_nic_set_tso(struct net_device *dev, u32 data)
-{
-	if (data) {
-		struct netxen_adapter *adapter = netdev_priv(dev);
-
-		dev->features |= NETIF_F_TSO;
-		if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-			dev->features |= NETIF_F_TSO6;
-	} else
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
-	return 0;
-}
-
 static void
 netxen_nic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
@@ -866,43 +811,6 @@ static int netxen_get_intr_coalesce(struct net_device *netdev,
 	return 0;
 }
 
-static int netxen_nic_set_flags(struct net_device *netdev, u32 data)
-{
-	struct netxen_adapter *adapter = netdev_priv(netdev);
-	int hw_lro;
-
-	if (ethtool_invalid_flags(netdev, data, ETH_FLAG_LRO))
-		return -EINVAL;
-
-	if (!(adapter->capabilities & NX_FW_CAPABILITY_HW_LRO))
-		return -EINVAL;
-
-	if (!adapter->rx_csum) {
-		netdev_info(netdev, "rx csum is off, cannot toggle LRO\n");
-		return -EINVAL;
-	}
-
-	if (!!(data & ETH_FLAG_LRO) == !!(netdev->features & NETIF_F_LRO))
-		return 0;
-
-	if (data & ETH_FLAG_LRO) {
-		hw_lro = NETXEN_NIC_LRO_ENABLED;
-		netdev->features |= NETIF_F_LRO;
-	} else {
-		hw_lro = NETXEN_NIC_LRO_DISABLED;
-		netdev->features &= ~NETIF_F_LRO;
-	}
-
-	if (netxen_config_hw_lro(adapter, hw_lro))
-		return -EIO;
-
-	if ((hw_lro == 0) && netxen_send_lro_cleanup(adapter))
-		return -EIO;
-
-
-	return 0;
-}
-
 const struct ethtool_ops netxen_nic_ethtool_ops = {
 	.get_settings = netxen_nic_get_settings,
 	.set_settings = netxen_nic_set_settings,
@@ -916,21 +824,12 @@ const struct ethtool_ops netxen_nic_ethtool_ops = {
 	.set_ringparam = netxen_nic_set_ringparam,
 	.get_pauseparam = netxen_nic_get_pauseparam,
 	.set_pauseparam = netxen_nic_set_pauseparam,
-	.get_tx_csum = netxen_nic_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_csum,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = netxen_nic_get_tso,
-	.set_tso = netxen_nic_set_tso,
 	.get_wol = netxen_nic_get_wol,
 	.set_wol = netxen_nic_set_wol,
 	.self_test = netxen_nic_diag_test,
 	.get_strings = netxen_nic_get_strings,
 	.get_ethtool_stats = netxen_nic_get_ethtool_stats,
 	.get_sset_count = netxen_get_sset_count,
-	.get_rx_csum = netxen_nic_get_rx_csum,
-	.set_rx_csum = netxen_nic_set_rx_csum,
 	.get_coalesce = netxen_get_intr_coalesce,
 	.set_coalesce = netxen_set_intr_coalesce,
-	.get_flags = ethtool_op_get_flags,
-	.set_flags = netxen_nic_set_flags,
 };
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index d8bd73d7e29..dc1967c1f31 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -780,7 +780,7 @@ enum {
 
 /*
  * capabilities register, can be used to selectively enable/disable features
- * for backward compability
+ * for backward compatibility
  */
 #define CRB_NIC_CAPABILITIES_HOST	NETXEN_NIC_REG(0x1a8)
 #define CRB_NIC_MSI_MODE_HOST		NETXEN_NIC_REG(0x270)
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 731077d8d96..7f999671c7b 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -1483,7 +1483,8 @@ static struct sk_buff *netxen_process_rxbuf(struct netxen_adapter *adapter,
 	if (!skb)
 		goto no_skb;
 
-	if (likely(adapter->rx_csum && cksum == STATUS_CKSUM_OK)) {
+	if (likely((adapter->netdev->features & NETIF_F_RXCSUM)
+	    && cksum == STATUS_CKSUM_OK)) {
 		adapter->stats.csummed++;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	} else
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 83348dc4b18..b644383017f 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -485,6 +485,37 @@ static void netxen_set_multicast_list(struct net_device *dev)
 	adapter->set_multi(dev);
 }
 
+static u32 netxen_fix_features(struct net_device *dev, u32 features)
+{
+	if (!(features & NETIF_F_RXCSUM)) {
+		netdev_info(dev, "disabling LRO as RXCSUM is off\n");
+
+		features &= ~NETIF_F_LRO;
+	}
+
+	return features;
+}
+
+static int netxen_set_features(struct net_device *dev, u32 features)
+{
+	struct netxen_adapter *adapter = netdev_priv(dev);
+	int hw_lro;
+
+	if (!((dev->features ^ features) & NETIF_F_LRO))
+		return 0;
+
+	hw_lro = (features & NETIF_F_LRO) ? NETXEN_NIC_LRO_ENABLED
+	         : NETXEN_NIC_LRO_DISABLED;
+
+	if (netxen_config_hw_lro(adapter, hw_lro))
+		return -EIO;
+
+	if (!(features & NETIF_F_LRO) && netxen_send_lro_cleanup(adapter))
+		return -EIO;
+
+	return 0;
+}
+
 static const struct net_device_ops netxen_netdev_ops = {
 	.ndo_open	   = netxen_nic_open,
 	.ndo_stop	   = netxen_nic_close,
@@ -495,6 +526,8 @@ static const struct net_device_ops netxen_netdev_ops = {
 	.ndo_set_mac_address    = netxen_nic_set_mac,
 	.ndo_change_mtu	   = netxen_nic_change_mtu,
 	.ndo_tx_timeout	   = netxen_tx_timeout,
+	.ndo_fix_features = netxen_fix_features,
+	.ndo_set_features = netxen_set_features,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = netxen_nic_poll_controller,
 #endif
@@ -905,7 +938,7 @@ netxen_nic_request_irq(struct netxen_adapter *adapter)
 	struct nx_host_sds_ring *sds_ring;
 	int err, ring;
 
-	unsigned long flags = IRQF_SAMPLE_RANDOM;
+	unsigned long flags = 0;
 	struct net_device *netdev = adapter->netdev;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
 
@@ -1196,7 +1229,6 @@ netxen_setup_netdev(struct netxen_adapter *adapter,
 	int err = 0;
 	struct pci_dev *pdev = adapter->pdev;
 
-	adapter->rx_csum = 1;
 	adapter->mc_enabled = 0;
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		adapter->max_mc_count = 38;
@@ -1210,14 +1242,13 @@ netxen_setup_netdev(struct netxen_adapter *adapter,
 
 	SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
 
-	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
-	netdev->features |= (NETIF_F_GRO);
-	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+	netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+	                      NETIF_F_RXCSUM;
 
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
-		netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
-		netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
-	}
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		netdev->hw_features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+
+	netdev->vlan_features |= netdev->hw_features;
 
 	if (adapter->pci_using_dac) {
 		netdev->features |= NETIF_F_HIGHDMA;
@@ -1225,10 +1256,12 @@ netxen_setup_netdev(struct netxen_adapter *adapter,
 	}
 
 	if (adapter->capabilities & NX_FW_CAPABILITY_FVLANTX)
-		netdev->features |= (NETIF_F_HW_VLAN_TX);
+		netdev->hw_features |= NETIF_F_HW_VLAN_TX;
 
 	if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
-		netdev->features |= NETIF_F_LRO;
+		netdev->hw_features |= NETIF_F_LRO;
+
+	netdev->features |= netdev->hw_features;
 
 	netdev->irq = adapter->msix_entries[0].vector;
 
@@ -1844,6 +1877,8 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	struct cmd_desc_type0 *hwdesc, *first_desc;
 	struct pci_dev *pdev;
 	int i, k;
+	int delta = 0;
+	struct skb_frag_struct *frag;
 
 	u32 producer;
 	int frag_count, no_of_desc;
@@ -1851,6 +1886,21 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	frag_count = skb_shinfo(skb)->nr_frags + 1;
 
+	/* 14 frags supported for normal packet and
+	 * 32 frags supported for TSO packet
+	 */
+	if (!skb_is_gso(skb) && frag_count > NETXEN_MAX_FRAGS_PER_TX) {
+
+		for (i = 0; i < (frag_count - NETXEN_MAX_FRAGS_PER_TX); i++) {
+			frag = &skb_shinfo(skb)->frags[i];
+			delta += frag->size;
+		}
+
+		if (!__pskb_pull_tail(skb, delta))
+			goto drop_packet;
+
+		frag_count = 1 + skb_shinfo(skb)->nr_frags;
+	}
 	/* 4 fragments per cmd des */
 	no_of_desc = (frag_count + 3) >> 2;
 
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 32678b6c6b3..cc25bff0bd3 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -1233,7 +1233,7 @@ static int link_status_1g_rgmii(struct niu *np, int *link_up_p)
 
 	bmsr = err;
 	if (bmsr & BMSR_LSTATUS) {
-		u16 adv, lpa, common, estat;
+		u16 adv, lpa;
 
 		err = mii_read(np, np->phy_addr, MII_ADVERTISE);
 		if (err < 0)
@@ -1245,12 +1245,9 @@ static int link_status_1g_rgmii(struct niu *np, int *link_up_p)
 			goto out;
 		lpa = err;
 
-		common = adv & lpa;
-
 		err = mii_read(np, np->phy_addr, MII_ESTATUS);
 		if (err < 0)
 			goto out;
-		estat = err;
 		link_up = 1;
 		current_speed = SPEED_1000;
 		current_duplex = DUPLEX_FULL;
@@ -1650,7 +1647,7 @@ static int xcvr_init_10g(struct niu *np)
 		break;
 	}
 
-	return 0;
+	return err;
 }
 
 static int mii_reset(struct niu *np)
@@ -2381,17 +2378,14 @@ static int serdes_init_10g_serdes(struct niu *np)
 	struct niu_link_config *lp = &np->link_config;
 	unsigned long ctrl_reg, test_cfg_reg, pll_cfg, i;
 	u64 ctrl_val, test_cfg_val, sig, mask, val;
-	u64 reset_val;
 
 	switch (np->port) {
 	case 0:
-		reset_val =  ENET_SERDES_RESET_0;
 		ctrl_reg = ENET_SERDES_0_CTRL_CFG;
 		test_cfg_reg = ENET_SERDES_0_TEST_CFG;
 		pll_cfg = ENET_SERDES_0_PLL_CFG;
 		break;
 	case 1:
-		reset_val =  ENET_SERDES_RESET_1;
 		ctrl_reg = ENET_SERDES_1_CTRL_CFG;
 		test_cfg_reg = ENET_SERDES_1_TEST_CFG;
 		pll_cfg = ENET_SERDES_1_PLL_CFG;
@@ -6071,8 +6065,7 @@ static int niu_request_irq(struct niu *np)
 	for (i = 0; i < np->num_ldg; i++) {
 		struct niu_ldg *lp = &np->ldg[i];
 
-		err = request_irq(lp->irq, niu_interrupt,
-				  IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+		err = request_irq(lp->irq, niu_interrupt, IRQF_SHARED,
 				  np->irq_name[i], lp);
 		if (err)
 			goto out_free_irqs;
@@ -6851,7 +6844,7 @@ static int niu_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	cmd->supported = lp->supported;
 	cmd->advertising = lp->active_advertising;
 	cmd->autoneg = lp->active_autoneg;
-	cmd->speed = lp->active_speed;
+	ethtool_cmd_speed_set(cmd, lp->active_speed);
 	cmd->duplex = lp->active_duplex;
 	cmd->port = (np->flags & NIU_FLAGS_FIBER) ? PORT_FIBRE : PORT_TP;
 	cmd->transceiver = (np->flags & NIU_FLAGS_XCVR_SERDES) ?
@@ -6866,7 +6859,7 @@ static int niu_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	struct niu_link_config *lp = &np->link_config;
 
 	lp->advertising = cmd->advertising;
-	lp->speed = cmd->speed;
+	lp->speed = ethtool_cmd_speed(cmd);
 	lp->duplex = cmd->duplex;
 	lp->autoneg = cmd->autoneg;
 	return niu_init_link(np);
@@ -7023,6 +7016,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class)
 	case UDP_V4_FLOW:
 		*class = CLASS_CODE_UDP_IPV4;
 		break;
+	case AH_ESP_V4_FLOW:
 	case AH_V4_FLOW:
 	case ESP_V4_FLOW:
 		*class = CLASS_CODE_AH_ESP_IPV4;
@@ -7036,6 +7030,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class)
 	case UDP_V6_FLOW:
 		*class = CLASS_CODE_UDP_IPV6;
 		break;
+	case AH_ESP_V6_FLOW:
 	case AH_V6_FLOW:
 	case ESP_V6_FLOW:
 		*class = CLASS_CODE_AH_ESP_IPV6;
@@ -7889,37 +7884,35 @@ static void niu_force_led(struct niu *np, int on)
 	nw64_mac(reg, val);
 }
 
-static int niu_phys_id(struct net_device *dev, u32 data)
+static int niu_set_phys_id(struct net_device *dev,
+			   enum ethtool_phys_id_state state)
+
 {
 	struct niu *np = netdev_priv(dev);
-	u64 orig_led_state;
-	int i;
 
 	if (!netif_running(dev))
 		return -EAGAIN;
 
-	if (data == 0)
-		data = 2;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		np->orig_led_state = niu_led_state_save(np);
+		return 1;	/* cycle on/off once per second */
 
-	orig_led_state = niu_led_state_save(np);
-	for (i = 0; i < (data * 2); i++) {
-		int on = ((i % 2) == 0);
+	case ETHTOOL_ID_ON:
+		niu_force_led(np, 1);
+		break;
 
-		niu_force_led(np, on);
+	case ETHTOOL_ID_OFF:
+		niu_force_led(np, 0);
+		break;
 
-		if (msleep_interruptible(500))
-			break;
+	case ETHTOOL_ID_INACTIVE:
+		niu_led_state_restore(np, np->orig_led_state);
 	}
-	niu_led_state_restore(np, orig_led_state);
 
 	return 0;
 }
 
-static int niu_set_flags(struct net_device *dev, u32 data)
-{
-	return ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH);
-}
-
 static const struct ethtool_ops niu_ethtool_ops = {
 	.get_drvinfo		= niu_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
@@ -7933,11 +7926,9 @@ static const struct ethtool_ops niu_ethtool_ops = {
 	.get_strings		= niu_get_strings,
 	.get_sset_count		= niu_get_sset_count,
 	.get_ethtool_stats	= niu_get_ethtool_stats,
-	.phys_id		= niu_phys_id,
+	.set_phys_id		= niu_set_phys_id,
 	.get_rxnfc		= niu_get_nfc,
 	.set_rxnfc		= niu_set_nfc,
-	.set_flags		= niu_set_flags,
-	.get_flags		= ethtool_op_get_flags,
 };
 
 static int niu_ldg_assign_ldn(struct niu *np, struct niu_parent *parent,
@@ -8131,7 +8122,7 @@ static int __devinit niu_pci_vpd_scan_props(struct niu *np,
 	netif_printk(np, probe, KERN_DEBUG, np->dev,
 		     "VPD_SCAN: start[%x] end[%x]\n", start, end);
 	while (start < end) {
-		int len, err, instance, type, prop_len;
+		int len, err, prop_len;
 		char namebuf[64];
 		u8 *prop_buf;
 		int max_len;
@@ -8147,8 +8138,6 @@ static int __devinit niu_pci_vpd_scan_props(struct niu *np,
 		len = err;
 		start += 3;
 
-		instance = niu_pci_eeprom_read(np, start);
-		type = niu_pci_eeprom_read(np, start + 3);
 		prop_len = niu_pci_eeprom_read(np, start + 4);
 		err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
 		if (err < 0)
@@ -9768,8 +9757,8 @@ static void __devinit niu_device_announce(struct niu *np)
 
 static void __devinit niu_set_basic_features(struct net_device *dev)
 {
-	dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM |
-			  NETIF_F_GRO | NETIF_F_RXHASH);
+	dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_RXHASH;
+	dev->features |= dev->hw_features | NETIF_F_RXCSUM;
 }
 
 static int __devinit niu_pci_init_one(struct pci_dev *pdev,
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index a41fa8ebe05..51e177e1860 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3279,6 +3279,7 @@ struct niu {
 	unsigned long			xpcs_off;
 
 	struct timer_list		timer;
+	u64				orig_led_state;
 	const struct niu_phy_ops	*phy_ops;
 	int				phy_addr;
 
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index a41b2cf4d91..3e4040f2f3c 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -512,7 +512,7 @@ static void ns83820_vlan_rx_register(struct net_device *ndev, struct vlan_group
 /* Packet Receiver
  *
  * The hardware supports linked lists of receive descriptors for
- * which ownership is transfered back and forth by means of an
+ * which ownership is transferred back and forth by means of an
  * ownership bit.  While the hardware does support the use of a
  * ring for receive descriptors, we only make use of a chain in
  * an attempt to reduce bus traffic under heavy load scenarios.
@@ -1147,7 +1147,7 @@ again:
 #ifdef NS83820_VLAN_ACCEL_SUPPORT
 	if(vlan_tx_tag_present(skb)) {
 		/* fetch the vlan tag info out of the
-		 * ancilliary data if the vlan code
+		 * ancillary data if the vlan code
 		 * is using hw vlan acceleration
 		 */
 		short tag = vlan_tx_tag_get(skb);
@@ -1251,7 +1251,7 @@ static int ns83820_get_settings(struct net_device *ndev,
 	/*
 	 * Here's the list of available ethtool commands from other drivers:
 	 *	cmd->advertising =
-	 *	cmd->speed =
+	 *	ethtool_cmd_speed_set(cmd, ...)
 	 *	cmd->duplex =
 	 *	cmd->port = 0;
 	 *	cmd->phy_address =
@@ -1289,13 +1289,13 @@ static int ns83820_get_settings(struct net_device *ndev,
 	cmd->duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF;
 	switch (cfg / CFG_SPDSTS0 & 3) {
 	case 2:
-		cmd->speed = SPEED_1000;
+		ethtool_cmd_speed_set(cmd, SPEED_1000);
 		break;
 	case 1:
-		cmd->speed = SPEED_100;
+		ethtool_cmd_speed_set(cmd, SPEED_100);
 		break;
 	default:
-		cmd->speed = SPEED_10;
+		ethtool_cmd_speed_set(cmd, SPEED_10);
 		break;
 	}
 	cmd->autoneg = (tbicr & TBICR_MR_AN_ENABLE)
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h
index e1e33c80fb2..59fac77d0db 100644
--- a/drivers/net/pch_gbe/pch_gbe.h
+++ b/drivers/net/pch_gbe/pch_gbe.h
@@ -351,7 +351,7 @@ struct pch_gbe_functions {
 };
 
 /**
- * struct pch_gbe_mac_info - MAC infomation
+ * struct pch_gbe_mac_info - MAC information
  * @addr[6]:		Store the MAC address
  * @fc:			Mode of flow control
  * @fc_autoneg:		Auto negotiation enable for flow control setting
@@ -375,7 +375,7 @@ struct pch_gbe_mac_info {
 };
 
 /**
- * struct pch_gbe_phy_info - PHY infomation
+ * struct pch_gbe_phy_info - PHY information
  * @addr:		PHY address
  * @id:			PHY's identifier
  * @revision:		PHY's revision
@@ -393,7 +393,7 @@ struct pch_gbe_phy_info {
 /*!
  * @ingroup Gigabit Ether driver Layer
  * @struct  pch_gbe_bus_info
- * @brief   Bus infomation
+ * @brief   Bus information
  */
 struct pch_gbe_bus_info {
 	u8 type;
@@ -404,7 +404,7 @@ struct pch_gbe_bus_info {
 /*!
  * @ingroup Gigabit Ether driver Layer
  * @struct  pch_gbe_hw
- * @brief   Hardware infomation
+ * @brief   Hardware information
  */
 struct pch_gbe_hw {
 	void *back;
@@ -462,7 +462,7 @@ struct pch_gbe_tx_desc {
 
 
 /**
- * struct pch_gbe_buffer - Buffer infomation
+ * struct pch_gbe_buffer - Buffer information
  * @skb:	pointer to a socket buffer
  * @dma:	DMA address
  * @time_stamp:	time stamp
@@ -477,7 +477,7 @@ struct pch_gbe_buffer {
 };
 
 /**
- * struct pch_gbe_tx_ring - tx ring infomation
+ * struct pch_gbe_tx_ring - tx ring information
  * @tx_lock:	spinlock structs
  * @desc:	pointer to the descriptor ring memory
  * @dma:	physical address of the descriptor ring
@@ -499,7 +499,7 @@ struct pch_gbe_tx_ring {
 };
 
 /**
- * struct pch_gbe_rx_ring - rx ring infomation
+ * struct pch_gbe_rx_ring - rx ring information
  * @desc:	pointer to the descriptor ring memory
  * @dma:	physical address of the descriptor ring
  * @size:	length of descriptor ring in bytes
@@ -597,8 +597,6 @@ struct pch_gbe_hw_stats {
  * @rx_ring:		Pointer of Rx descriptor ring structure
  * @rx_buffer_len:	Receive buffer length
  * @tx_queue_len:	Transmit queue length
- * @rx_csum:		Receive TCP/IP checksum enable/disable
- * @tx_csum:		Transmit TCP/IP checksum enable/disable
  * @have_msi:		PCI MSI mode flag
  */
 
@@ -623,8 +621,6 @@ struct pch_gbe_adapter {
 	struct pch_gbe_rx_ring *rx_ring;
 	unsigned long rx_buffer_len;
 	unsigned long tx_queue_len;
-	bool rx_csum;
-	bool tx_csum;
 	bool have_msi;
 };
 
diff --git a/drivers/net/pch_gbe/pch_gbe_ethtool.c b/drivers/net/pch_gbe/pch_gbe_ethtool.c
index c8c873b31a8..ea2d8e41887 100644
--- a/drivers/net/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/pch_gbe/pch_gbe_ethtool.c
@@ -21,7 +21,7 @@
 #include "pch_gbe_api.h"
 
 /**
- * pch_gbe_stats - Stats item infomation
+ * pch_gbe_stats - Stats item information
  */
 struct pch_gbe_stats {
 	char string[ETH_GSTRING_LEN];
@@ -92,7 +92,7 @@ static int pch_gbe_get_settings(struct net_device *netdev,
 	ecmd->advertising &= ~(ADVERTISED_TP | ADVERTISED_1000baseT_Half);
 
 	if (!netif_carrier_ok(adapter->netdev))
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 	return ret;
 }
 
@@ -109,12 +109,15 @@ static int pch_gbe_set_settings(struct net_device *netdev,
 {
 	struct pch_gbe_adapter *adapter = netdev_priv(netdev);
 	struct pch_gbe_hw *hw = &adapter->hw;
+	u32 speed = ethtool_cmd_speed(ecmd);
 	int ret;
 
 	pch_gbe_hal_write_phy_reg(hw, MII_BMCR, BMCR_RESET);
 
-	if (ecmd->speed == USHRT_MAX) {
-		ecmd->speed = SPEED_1000;
+	/* when set_settings() is called with a ethtool_cmd previously
+	 * filled by get_settings() on a down link, speed is -1: */
+	if (speed == UINT_MAX) {
+		speed = SPEED_1000;
 		ecmd->duplex = DUPLEX_FULL;
 	}
 	ret = mii_ethtool_sset(&adapter->mii, ecmd);
@@ -122,7 +125,7 @@ static int pch_gbe_set_settings(struct net_device *netdev,
 		pr_err("Error: mii_ethtool_sset\n");
 		return ret;
 	}
-	hw->mac.link_speed = ecmd->speed;
+	hw->mac.link_speed = speed;
 	hw->mac.link_duplex = ecmd->duplex;
 	hw->phy.autoneg_advertised = ecmd->advertising;
 	hw->mac.autoneg = ecmd->autoneg;
@@ -434,57 +437,6 @@ static int pch_gbe_set_pauseparam(struct net_device *netdev,
 }
 
 /**
- * pch_gbe_get_rx_csum - Report whether receive checksums are turned on or off
- * @netdev:  Network interface device structure
- * Returns
- *	true(1):  Checksum On
- *	false(0): Checksum Off
- */
-static u32 pch_gbe_get_rx_csum(struct net_device *netdev)
-{
-	struct pch_gbe_adapter *adapter = netdev_priv(netdev);
-
-	return adapter->rx_csum;
-}
-
-/**
- * pch_gbe_set_rx_csum - Turn receive checksum on or off
- * @netdev:  Network interface device structure
- * @data:    Checksum On[true] or Off[false]
- * Returns
- *	0:			Successful.
- *	Negative value:		Failed.
- */
-static int pch_gbe_set_rx_csum(struct net_device *netdev, u32 data)
-{
-	struct pch_gbe_adapter *adapter = netdev_priv(netdev);
-
-	adapter->rx_csum = data;
-	if ((netif_running(netdev)))
-		pch_gbe_reinit_locked(adapter);
-	else
-		pch_gbe_reset(adapter);
-
-	return 0;
-}
-
-/**
- * pch_gbe_set_tx_csum - Turn transmit checksums on or off
- * @netdev: Network interface device structure
- * @data:   Checksum on[true] or off[false]
- * Returns
- *	0:			Successful.
- *	Negative value:		Failed.
- */
-static int pch_gbe_set_tx_csum(struct net_device *netdev, u32 data)
-{
-	struct pch_gbe_adapter *adapter = netdev_priv(netdev);
-
-	adapter->tx_csum = data;
-	return ethtool_op_set_tx_ipv6_csum(netdev, data);
-}
-
-/**
  * pch_gbe_get_strings - Return a set of strings that describe the requested
  *			 objects
  * @netdev:    Network interface device structure
@@ -554,9 +506,6 @@ static const struct ethtool_ops pch_gbe_ethtool_ops = {
 	.set_ringparam = pch_gbe_set_ringparam,
 	.get_pauseparam = pch_gbe_get_pauseparam,
 	.set_pauseparam = pch_gbe_set_pauseparam,
-	.get_rx_csum = pch_gbe_get_rx_csum,
-	.set_rx_csum = pch_gbe_set_rx_csum,
-	.set_tx_csum = pch_gbe_set_tx_csum,
 	.get_strings = pch_gbe_get_strings,
 	.get_ethtool_stats = pch_gbe_get_ethtool_stats,
 	.get_sset_count = pch_gbe_get_sset_count,
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 50986840c99..c2476fd9657 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -34,6 +34,10 @@ const char pch_driver_version[] = DRV_VERSION;
 #define PCH_GBE_COPYBREAK_DEFAULT	256
 #define PCH_GBE_PCI_BAR			1
 
+/* Macros for ML7223 */
+#define PCI_VENDOR_ID_ROHM			0x10db
+#define PCI_DEVICE_ID_ROHM_ML7223_GBE		0x8013
+
 #define PCH_GBE_TX_WEIGHT         64
 #define PCH_GBE_RX_WEIGHT         64
 #define PCH_GBE_RX_BUFFER_WRITE   16
@@ -43,8 +47,7 @@ const char pch_driver_version[] = DRV_VERSION;
 
 #define PCH_GBE_MAC_RGMII_CTRL_SETTING ( \
 	PCH_GBE_CHIP_TYPE_INTERNAL | \
-	PCH_GBE_RGMII_MODE_RGMII   | \
-	PCH_GBE_CRS_SEL              \
+	PCH_GBE_RGMII_MODE_RGMII     \
 	)
 
 /* Ethertype field values */
@@ -656,6 +659,7 @@ static void pch_gbe_configure_tx(struct pch_gbe_adapter *adapter)
  */
 static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct pch_gbe_hw *hw = &adapter->hw;
 	u32 rx_mode, tcpip;
 
@@ -666,7 +670,7 @@ static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter)
 
 	tcpip = ioread32(&hw->reg->TCPIP_ACC);
 
-	if (adapter->rx_csum) {
+	if (netdev->features & NETIF_F_RXCSUM) {
 		tcpip &= ~PCH_GBE_RX_TCPIPACC_OFF;
 		tcpip |= PCH_GBE_RX_TCPIPACC_EN;
 	} else {
@@ -887,12 +891,12 @@ static void pch_gbe_watchdog(unsigned long data)
 	struct pch_gbe_adapter *adapter = (struct pch_gbe_adapter *)data;
 	struct net_device *netdev = adapter->netdev;
 	struct pch_gbe_hw *hw = &adapter->hw;
-	struct ethtool_cmd cmd;
 
 	pr_debug("right now = %ld\n", jiffies);
 
 	pch_gbe_update_stats(adapter);
 	if ((mii_link_ok(&adapter->mii)) && (!netif_carrier_ok(netdev))) {
+		struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
 		netdev->tx_queue_len = adapter->tx_queue_len;
 		/* mii library handles link maintenance tasks */
 		if (mii_ethtool_gset(&adapter->mii, &cmd)) {
@@ -902,7 +906,7 @@ static void pch_gbe_watchdog(unsigned long data)
 						PCH_GBE_WATCHDOG_PERIOD));
 			return;
 		}
-		hw->mac.link_speed = cmd.speed;
+		hw->mac.link_speed = ethtool_cmd_speed(&cmd);
 		hw->mac.link_duplex = cmd.duplex;
 		/* Set the RGMII control. */
 		pch_gbe_set_rgmii_ctrl(adapter, hw->mac.link_speed,
@@ -912,7 +916,7 @@ static void pch_gbe_watchdog(unsigned long data)
 				 hw->mac.link_duplex);
 		netdev_dbg(netdev,
 			   "Link is Up %d Mbps %s-Duplex\n",
-			   cmd.speed,
+			   hw->mac.link_speed,
 			   cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
 		netif_carrier_on(netdev);
 		netif_wake_queue(netdev);
@@ -950,7 +954,7 @@ static void pch_gbe_tx_queue(struct pch_gbe_adapter *adapter,
 	frame_ctrl = 0;
 	if (unlikely(skb->len < PCH_GBE_SHORT_PKT))
 		frame_ctrl |= PCH_GBE_TXD_CTRL_APAD;
-	if (unlikely(!adapter->tx_csum))
+	if (skb->ip_summed == CHECKSUM_NONE)
 		frame_ctrl |= PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF;
 
 	/* Performs checksum processing */
@@ -958,7 +962,7 @@ static void pch_gbe_tx_queue(struct pch_gbe_adapter *adapter,
 	 * It is because the hardware accelerator does not support a checksum,
 	 * when the received data size is less than 64 bytes.
 	 */
-	if ((skb->len < PCH_GBE_SHORT_PKT) && (adapter->tx_csum)) {
+	if (skb->len < PCH_GBE_SHORT_PKT && skb->ip_summed != CHECKSUM_NONE) {
 		frame_ctrl |= PCH_GBE_TXD_CTRL_APAD |
 			      PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF;
 		if (skb->protocol == htons(ETH_P_IP)) {
@@ -1011,7 +1015,7 @@ static void pch_gbe_tx_queue(struct pch_gbe_adapter *adapter,
 	tmp_skb->len = skb->len;
 	memcpy(&tmp_skb->data[ETH_HLEN + 2], &skb->data[ETH_HLEN],
 	       (skb->len - ETH_HLEN));
-	/*-- Set Buffer infomation --*/
+	/*-- Set Buffer information --*/
 	buffer_info->length = tmp_skb->len;
 	buffer_info->dma = dma_map_single(&adapter->pdev->dev, tmp_skb->data,
 					  buffer_info->length,
@@ -1426,7 +1430,7 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter,
 			length = (rx_desc->rx_words_eob) - 3;
 
 			/* Decide the data conversion method */
-			if (!adapter->rx_csum) {
+			if (!(netdev->features & NETIF_F_RXCSUM)) {
 				/* [Header:14][payload] */
 				if (NET_IP_ALIGN) {
 					/* Because alignment differs,
@@ -1494,12 +1498,11 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter,
 			/* Write meta date of skb */
 			skb_put(skb, length);
 			skb->protocol = eth_type_trans(skb, netdev);
-			if ((tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK) ==
-			    PCH_GBE_RXD_ACC_STAT_TCPIPOK) {
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
-			} else {
+			if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK)
 				skb->ip_summed = CHECKSUM_NONE;
-			}
+			else
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+
 			napi_gro_receive(&adapter->napi, skb);
 			(*work_done)++;
 			pr_debug("Receive skb->ip_summed: %d length: %d\n",
@@ -1540,7 +1543,7 @@ int pch_gbe_setup_tx_resources(struct pch_gbe_adapter *adapter,
 	size = (int)sizeof(struct pch_gbe_buffer) * tx_ring->count;
 	tx_ring->buffer_info = vzalloc(size);
 	if (!tx_ring->buffer_info) {
-		pr_err("Unable to allocate memory for the buffer infomation\n");
+		pr_err("Unable to allocate memory for the buffer information\n");
 		return -ENOMEM;
 	}
 
@@ -2030,6 +2033,29 @@ static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu)
 }
 
 /**
+ * pch_gbe_set_features - Reset device after features changed
+ * @netdev:   Network interface device structure
+ * @features:  New features
+ * Returns
+ *	0:		HW state updated successfully
+ */
+static int pch_gbe_set_features(struct net_device *netdev, u32 features)
+{
+	struct pch_gbe_adapter *adapter = netdev_priv(netdev);
+	u32 changed = features ^ netdev->features;
+
+	if (!(changed & NETIF_F_RXCSUM))
+		return 0;
+
+	if (netif_running(netdev))
+		pch_gbe_reinit_locked(adapter);
+	else
+		pch_gbe_reset(adapter);
+
+	return 0;
+}
+
+/**
  * pch_gbe_ioctl - Controls register through a MII interface
  * @netdev:   Network interface device structure
  * @ifr:      Pointer to ifr structure
@@ -2129,6 +2155,7 @@ static const struct net_device_ops pch_gbe_netdev_ops = {
 	.ndo_set_mac_address = pch_gbe_set_mac,
 	.ndo_tx_timeout = pch_gbe_tx_timeout,
 	.ndo_change_mtu = pch_gbe_change_mtu,
+	.ndo_set_features = pch_gbe_set_features,
 	.ndo_do_ioctl = pch_gbe_ioctl,
 	.ndo_set_multicast_list = &pch_gbe_set_multi,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2334,7 +2361,9 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 	netdev->watchdog_timeo = PCH_GBE_WATCHDOG_PERIOD;
 	netif_napi_add(netdev, &adapter->napi,
 		       pch_gbe_napi_poll, PCH_GBE_RX_WEIGHT);
-	netdev->features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_GRO;
+	netdev->hw_features = NETIF_F_RXCSUM |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	netdev->features = netdev->hw_features;
 	pch_gbe_set_ethtool_ops(netdev);
 
 	pch_gbe_mac_load_mac_addr(&adapter->hw);
@@ -2373,11 +2402,6 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 
 	pch_gbe_check_options(adapter);
 
-	if (adapter->tx_csum)
-		netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-	else
-		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-
 	/* initialize the wol settings based on the eeprom settings */
 	adapter->wake_up_evt = PCH_GBE_WL_INIT_SETTING;
 	dev_info(&pdev->dev, "MAC address : %pM\n", netdev->dev_addr);
@@ -2420,6 +2444,13 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = {
 	 .class = (PCI_CLASS_NETWORK_ETHERNET << 8),
 	 .class_mask = (0xFFFF00)
 	 },
+	{.vendor = PCI_VENDOR_ID_ROHM,
+	 .device = PCI_DEVICE_ID_ROHM_ML7223_GBE,
+	 .subvendor = PCI_ANY_ID,
+	 .subdevice = PCI_ANY_ID,
+	 .class = (PCI_CLASS_NETWORK_ETHERNET << 8),
+	 .class_mask = (0xFFFF00)
+	 },
 	/* required last entry */
 	{0}
 };
diff --git a/drivers/net/pch_gbe/pch_gbe_param.c b/drivers/net/pch_gbe/pch_gbe_param.c
index ef0996a0eaa..5b5d90a47e2 100644
--- a/drivers/net/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/pch_gbe/pch_gbe_param.c
@@ -426,6 +426,8 @@ full_duplex_only:
 void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 {
 	struct pch_gbe_hw *hw = &adapter->hw;
+	struct net_device *dev = adapter->netdev;
+	int val;
 
 	{ /* Transmit Descriptor Count */
 		static const struct pch_gbe_option opt = {
@@ -466,9 +468,10 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 			.err  = "defaulting to Enabled",
 			.def  = PCH_GBE_DEFAULT_RX_CSUM
 		};
-		adapter->rx_csum = XsumRX;
-		pch_gbe_validate_option((int *)(&adapter->rx_csum),
-					&opt, adapter);
+		val = XsumRX;
+		pch_gbe_validate_option(&val, &opt, adapter);
+		if (!val)
+			dev->features &= ~NETIF_F_RXCSUM;
 	}
 	{ /* Checksum Offload Enable/Disable */
 		static const struct pch_gbe_option opt = {
@@ -477,9 +480,10 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 			.err  = "defaulting to Enabled",
 			.def  = PCH_GBE_DEFAULT_TX_CSUM
 		};
-		adapter->tx_csum = XsumTX;
-		pch_gbe_validate_option((int *)(&adapter->tx_csum),
-						&opt, adapter);
+		val = XsumTX;
+		pch_gbe_validate_option(&val, &opt, adapter);
+		if (!val)
+			dev->features &= ~NETIF_F_ALL_CSUM;
 	}
 	{ /* Flow Control */
 		static const struct pch_gbe_option opt = {
diff --git a/drivers/net/pch_gbe/pch_gbe_phy.c b/drivers/net/pch_gbe/pch_gbe_phy.c
index 923a687acd3..28bb9603d73 100644
--- a/drivers/net/pch_gbe/pch_gbe_phy.c
+++ b/drivers/net/pch_gbe/pch_gbe_phy.c
@@ -247,7 +247,7 @@ inline void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
 void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
 {
 	struct pch_gbe_adapter *adapter;
-	struct ethtool_cmd     cmd;
+	struct ethtool_cmd     cmd = { .cmd = ETHTOOL_GSET };
 	int ret;
 	u16 mii_reg;
 
@@ -256,7 +256,7 @@ void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
 	if (ret)
 		pr_err("Error: mii_ethtool_gset\n");
 
-	cmd.speed = hw->mac.link_speed;
+	ethtool_cmd_speed_set(&cmd, hw->mac.link_speed);
 	cmd.duplex = hw->mac.link_duplex;
 	cmd.advertising = hw->phy.autoneg_advertised;
 	cmd.autoneg = hw->mac.autoneg;
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 1766dc4f07e..c0f23376a46 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -214,7 +214,7 @@ static struct {
 	{ "SMC1211TX EZCard 10/100 (RealTek RTL8139)" },
 /*	{ MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/
 	{ "Delta Electronics 8139 10/100BaseTX" },
-	{ "Addtron Technolgy 8139 10/100BaseTX" },
+	{ "Addtron Technology 8139 10/100BaseTX" },
 };
 
 
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 321b12f8264..81ac330f931 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -950,7 +950,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev)
 }
 
 /*  Update statistics.
-	Suprisingly this need not be run single-threaded, but it effectively is.
+	Surprisingly this need not be run single-threaded, but it effectively is.
 	The counters clear when read, so the adds must merely be atomic.
  */
 static void update_stats(struct net_device *dev)
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index d3cb7720586..3077d72e822 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -780,7 +780,7 @@ module_exit(exit_axnet_cs);
   Alexey Kuznetsov	: use the 8390's six bit hash multicast filter.
   Paul Gortmaker	: tweak ANK's above multicast changes a bit.
   Paul Gortmaker	: update packet statistics for v2.1.x
-  Alan Cox		: support arbitary stupid port mappings on the
+  Alan Cox		: support arbitrary stupid port mappings on the
   			  68K Macintosh. Support >16bit I/O spaces
   Paul Gortmaker	: add kmod support for auto-loading of the 8390
 			  module by all drivers that require it.
@@ -842,7 +842,7 @@ static void do_set_multicast_list(struct net_device *dev);
 /*
  *	SMP and the 8390 setup.
  *
- *	The 8390 isnt exactly designed to be multithreaded on RX/TX. There is
+ *	The 8390 isn't exactly designed to be multithreaded on RX/TX. There is
  *	a page register that controls bank and packet buffer access. We guard
  *	this with ei_local->page_lock. Nobody should assume or set the page other
  *	than zero when the lock is not held. Lock holders must restore page 0
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 8a9ff531892..288e4f1317e 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1264,7 +1264,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
 
 /*======================================================================
 
-    Handle a Tx anomolous event.  Entered while in Window 2.
+    Handle a Tx anomalous event.  Entered while in Window 2.
 
 ======================================================================*/
 
@@ -1860,7 +1860,7 @@ static int smc_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
     tmp = inw(ioaddr + CONFIG);
     ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP;
     ecmd->transceiver = XCVR_INTERNAL;
-    ecmd->speed = SPEED_10;
+    ethtool_cmd_speed_set(ecmd, SPEED_10);
     ecmd->phy_address = ioaddr + MGMT;
 
     SMC_SELECT_BANK(0);
@@ -1875,8 +1875,8 @@ static int smc_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
     u16 tmp;
     unsigned int ioaddr = dev->base_addr;
 
-    if (ecmd->speed != SPEED_10)
-    	return -EINVAL;
+    if (ethtool_cmd_speed(ecmd) != SPEED_10)
+	return -EINVAL;
     if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
     	return -EINVAL;
     if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI)
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index aee3bb0358b..b48aba9e422 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -295,12 +295,14 @@ struct pcnet32_private {
 	struct net_device	*next;
 	struct mii_if_info	mii_if;
 	struct timer_list	watchdog_timer;
-	struct timer_list	blink_timer;
 	u32			msg_enable;	/* debug message level */
 
 	/* each bit indicates an available PHY */
 	u32			phymask;
 	unsigned short		chip_version;	/* which variant this is */
+
+	/* saved registers during ethtool blink */
+	u16 			save_regs[4];
 };
 
 static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *);
@@ -324,8 +326,6 @@ static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits);
 static void pcnet32_ethtool_test(struct net_device *dev,
 				 struct ethtool_test *eth_test, u64 * data);
 static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1);
-static int pcnet32_phys_id(struct net_device *dev, u32 data);
-static void pcnet32_led_blink_callback(struct net_device *dev);
 static int pcnet32_get_regs_len(struct net_device *dev);
 static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 			     void *ptr);
@@ -1022,7 +1022,8 @@ clean_up:
 	return rc;
 }				/* end pcnet32_loopback_test  */
 
-static void pcnet32_led_blink_callback(struct net_device *dev)
+static int pcnet32_set_phys_id(struct net_device *dev,
+			       enum ethtool_phys_id_state state)
 {
 	struct pcnet32_private *lp = netdev_priv(dev);
 	struct pcnet32_access *a = &lp->a;
@@ -1030,50 +1031,31 @@ static void pcnet32_led_blink_callback(struct net_device *dev)
 	unsigned long flags;
 	int i;
 
-	spin_lock_irqsave(&lp->lock, flags);
-	for (i = 4; i < 8; i++)
-		a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000);
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	mod_timer(&lp->blink_timer, PCNET32_BLINK_TIMEOUT);
-}
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		/* Save the current value of the bcrs */
+		spin_lock_irqsave(&lp->lock, flags);
+		for (i = 4; i < 8; i++)
+			lp->save_regs[i - 4] = a->read_bcr(ioaddr, i);
+		spin_unlock_irqrestore(&lp->lock, flags);
+		return 2;	/* cycle on/off twice per second */
 
-static int pcnet32_phys_id(struct net_device *dev, u32 data)
-{
-	struct pcnet32_private *lp = netdev_priv(dev);
-	struct pcnet32_access *a = &lp->a;
-	ulong ioaddr = dev->base_addr;
-	unsigned long flags;
-	int i, regs[4];
+	case ETHTOOL_ID_ON:
+	case ETHTOOL_ID_OFF:
+		/* Blink the led */
+		spin_lock_irqsave(&lp->lock, flags);
+		for (i = 4; i < 8; i++)
+			a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000);
+		spin_unlock_irqrestore(&lp->lock, flags);
+		break;
 
-	if (!lp->blink_timer.function) {
-		init_timer(&lp->blink_timer);
-		lp->blink_timer.function = (void *)pcnet32_led_blink_callback;
-		lp->blink_timer.data = (unsigned long)dev;
+	case ETHTOOL_ID_INACTIVE:
+		/* Restore the original value of the bcrs */
+		spin_lock_irqsave(&lp->lock, flags);
+		for (i = 4; i < 8; i++)
+			a->write_bcr(ioaddr, i, lp->save_regs[i - 4]);
+		spin_unlock_irqrestore(&lp->lock, flags);
 	}
-
-	/* Save the current value of the bcrs */
-	spin_lock_irqsave(&lp->lock, flags);
-	for (i = 4; i < 8; i++)
-		regs[i - 4] = a->read_bcr(ioaddr, i);
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	mod_timer(&lp->blink_timer, jiffies);
-	set_current_state(TASK_INTERRUPTIBLE);
-
-	/* AV: the limit here makes no sense whatsoever */
-	if ((!data) || (data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ)))
-		data = (u32) (MAX_SCHEDULE_TIMEOUT / HZ);
-
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&lp->blink_timer);
-
-	/* Restore the original value of the bcrs */
-	spin_lock_irqsave(&lp->lock, flags);
-	for (i = 4; i < 8; i++)
-		a->write_bcr(ioaddr, i, regs[i - 4]);
-	spin_unlock_irqrestore(&lp->lock, flags);
-
 	return 0;
 }
 
@@ -1450,7 +1432,7 @@ static const struct ethtool_ops pcnet32_ethtool_ops = {
 	.set_ringparam		= pcnet32_set_ringparam,
 	.get_strings		= pcnet32_get_strings,
 	.self_test		= pcnet32_ethtool_test,
-	.phys_id		= pcnet32_phys_id,
+	.set_phys_id		= pcnet32_set_phys_id,
 	.get_regs_len		= pcnet32_get_regs_len,
 	.get_regs		= pcnet32_get_regs,
 	.get_sset_count		= pcnet32_get_sset_count,
@@ -1651,7 +1633,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	/*
 	 *  On selected chips turn on the BCR18:NOUFLO bit. This stops transmit
 	 *  starting until the packet is loaded. Strike one for reliability, lose
-	 *  one for latency - although on PCI this isnt a big loss. Older chips
+	 *  one for latency - although on PCI this isn't a big loss. Older chips
 	 *  have FIFO's smaller than a packet, so you can't do this.
 	 *  Turn on BCR18:BurstRdEn and BCR18:BurstWrEn.
 	 */
@@ -2117,7 +2099,7 @@ static int pcnet32_open(struct net_device *dev)
 		int first_phy = -1;
 		u16 bmcr;
 		u32 bcr9;
-		struct ethtool_cmd ecmd;
+		struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 
 		/*
 		 * There is really no good other way to handle multiple PHYs
@@ -2133,9 +2115,9 @@ static int pcnet32_open(struct net_device *dev)
 			ecmd.port = PORT_MII;
 			ecmd.transceiver = XCVR_INTERNAL;
 			ecmd.autoneg = AUTONEG_DISABLE;
-			ecmd.speed =
-			    lp->
-			    options & PCNET32_PORT_100 ? SPEED_100 : SPEED_10;
+			ethtool_cmd_speed_set(&ecmd,
+					      (lp->options & PCNET32_PORT_100) ?
+					      SPEED_100 : SPEED_10);
 			bcr9 = lp->a.read_bcr(ioaddr, 9);
 
 			if (lp->options & PCNET32_PORT_FD) {
@@ -2781,11 +2763,11 @@ static void pcnet32_check_media(struct net_device *dev, int verbose)
 		netif_carrier_on(dev);
 		if (lp->mii) {
 			if (netif_msg_link(lp)) {
-				struct ethtool_cmd ecmd;
+				struct ethtool_cmd ecmd = {
+					.cmd = ETHTOOL_GSET };
 				mii_ethtool_gset(&lp->mii_if, &ecmd);
-				netdev_info(dev, "link up, %sMbps, %s-duplex\n",
-					    (ecmd.speed == SPEED_100)
-					    ? "100" : "10",
+				netdev_info(dev, "link up, %uMbps, %s-duplex\n",
+					    ethtool_cmd_speed(&ecmd),
 					    (ecmd.duplex == DUPLEX_FULL)
 					    ? "full" : "half");
 			}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f7670330f98..a4759576075 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -238,6 +238,8 @@ static void phy_sanitize_settings(struct phy_device *phydev)
  */
 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 {
+	u32 speed = ethtool_cmd_speed(cmd);
+
 	if (cmd->phy_address != phydev->addr)
 		return -EINVAL;
 
@@ -253,16 +255,16 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 		return -EINVAL;
 
 	if (cmd->autoneg == AUTONEG_DISABLE &&
-	    ((cmd->speed != SPEED_1000 &&
-	      cmd->speed != SPEED_100 &&
-	      cmd->speed != SPEED_10) ||
+	    ((speed != SPEED_1000 &&
+	      speed != SPEED_100 &&
+	      speed != SPEED_10) ||
 	     (cmd->duplex != DUPLEX_HALF &&
 	      cmd->duplex != DUPLEX_FULL)))
 		return -EINVAL;
 
 	phydev->autoneg = cmd->autoneg;
 
-	phydev->speed = cmd->speed;
+	phydev->speed = speed;
 
 	phydev->advertising = cmd->advertising;
 
@@ -286,7 +288,7 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 
 	cmd->advertising = phydev->advertising;
 
-	cmd->speed = phydev->speed;
+	ethtool_cmd_speed_set(cmd, phydev->speed);
 	cmd->duplex = phydev->duplex;
 	cmd->port = PORT_MII;
 	cmd->phy_address = phydev->addr;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e870c0698bb..ff109fe5af6 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -538,7 +538,7 @@ EXPORT_SYMBOL(phy_detach);
 /* Generic PHY support and helper functions */
 
 /**
- * genphy_config_advert - sanitize and advertise auto-negotation parameters
+ * genphy_config_advert - sanitize and advertise auto-negotiation parameters
  * @phydev: target phy_device struct
  *
  * Description: Writes MII_ADVERTISE with the appropriate values,
@@ -687,7 +687,7 @@ int genphy_config_aneg(struct phy_device *phydev)
 		return result;
 
 	if (result == 0) {
-		/* Advertisment hasn't changed, but maybe aneg was never on to
+		/* Advertisement hasn't changed, but maybe aneg was never on to
 		 * begin with?  Or maybe phy was isolated? */
 		int ctl = phy_read(phydev, MII_BMCR);
 
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 9f6d670748d..4609bc0e2f5 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1448,7 +1448,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 
 		/*
 		 *check if we are on the last channel or
-		 *we exceded the lenght of the data to
+		 *we exceded the length of the data to
 		 *fragment
 		 */
 		if ((nfree <= 0) || (flen > len))
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index 4e6b72f57de..2573f525f11 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -178,7 +178,7 @@ ppp_print_buffer (const char *name, const __u8 *buf, int count)
  * way to fix this is to use a rwlock in the tty struct, but for now
  * we use a single global rwlock for all ttys in ppp line discipline.
  *
- * FIXME: Fixed in tty_io nowdays.
+ * FIXME: Fixed in tty_io nowadays.
  */
 static DEFINE_RWLOCK(disc_data_lock);
 
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 78c0e3c9b2b..718879b35b7 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -115,7 +115,7 @@ struct pppoe_net {
  * 2) Session stage (MAC and SID are known)
  *
  * Ethernet frames have a special tag for this but
- * we use simplier approach based on session id
+ * we use simpler approach based on session id
  */
 static inline bool stage_session(__be16 sid)
 {
@@ -317,7 +317,7 @@ static void pppoe_flush_dev(struct net_device *dev)
 			lock_sock(sk);
 
 			if (po->pppoe_dev == dev &&
-			    sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+			    sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) {
 				pppox_unbind_sock(sk);
 				sk->sk_state = PPPOX_ZOMBIE;
 				sk->sk_state_change(sk);
diff --git a/drivers/net/pptp.c b/drivers/net/pptp.c
index 51dfcf8023c..1286fe212dc 100644
--- a/drivers/net/pptp.c
+++ b/drivers/net/pptp.c
@@ -175,6 +175,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	struct pptp_opt *opt = &po->proto.pptp;
 	struct pptp_gre_header *hdr;
 	unsigned int header_len = sizeof(*hdr);
+	struct flowi4 fl4;
 	int islcp;
 	int len;
 	unsigned char *data;
@@ -189,7 +190,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	if (sk_pppox(po)->sk_state & PPPOX_DEAD)
 		goto tx_error;
 
-	rt = ip_route_output_ports(&init_net, NULL,
+	rt = ip_route_output_ports(&init_net, &fl4, NULL,
 				   opt->dst_addr.sin_addr.s_addr,
 				   opt->src_addr.sin_addr.s_addr,
 				   0, 0, IPPROTO_GRE,
@@ -270,8 +271,8 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 		iph->frag_off	=	0;
 	iph->protocol = IPPROTO_GRE;
 	iph->tos      = 0;
-	iph->daddr    = rt->rt_dst;
-	iph->saddr    = rt->rt_src;
+	iph->daddr    = fl4.daddr;
+	iph->saddr    = fl4.saddr;
 	iph->ttl      = ip4_dst_hoplimit(&rt->dst);
 	iph->tot_len  = htons(skb->len);
 
@@ -434,6 +435,7 @@ static int pptp_connect(struct socket *sock, struct sockaddr *uservaddr,
 	struct pppox_sock *po = pppox_sk(sk);
 	struct pptp_opt *opt = &po->proto.pptp;
 	struct rtable *rt;
+	struct flowi4 fl4;
 	int error = 0;
 
 	if (sp->sa_protocol != PX_PROTO_PPTP)
@@ -463,7 +465,7 @@ static int pptp_connect(struct socket *sock, struct sockaddr *uservaddr,
 	po->chan.private = sk;
 	po->chan.ops = &pptp_chan_ops;
 
-	rt = ip_route_output_ports(&init_net, sk,
+	rt = ip_route_output_ports(&init_net, &fl4, sk,
 				   opt->dst_addr.sin_addr.s_addr,
 				   opt->src_addr.sin_addr.s_addr,
 				   0, 0,
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 5ecfa4b1e75..b1f251da153 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -632,7 +632,7 @@ static inline void gelic_card_enable_rxdmac(struct gelic_card *card)
  * @card: card structure
  *
  * gelic_card_disable_rxdmac terminates processing on the DMA controller by
- * turing off DMA and issueing a force end
+ * turing off DMA and issuing a force end
  */
 static inline void gelic_card_disable_rxdmac(struct gelic_card *card)
 {
@@ -650,7 +650,7 @@ static inline void gelic_card_disable_rxdmac(struct gelic_card *card)
  * @card: card structure
  *
  * gelic_card_disable_txdmac terminates processing on the DMA controller by
- * turing off DMA and issueing a force end
+ * turing off DMA and issuing a force end
  */
 static inline void gelic_card_disable_txdmac(struct gelic_card *card)
 {
@@ -951,7 +951,7 @@ static void gelic_net_pass_skb_up(struct gelic_descr *descr,
 	skb->protocol = eth_type_trans(skb, netdev);
 
 	/* checksum offload */
-	if (card->rx_csum) {
+	if (netdev->features & NETIF_F_RXCSUM) {
 		if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
 		    (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -1243,17 +1243,17 @@ static int gelic_ether_get_settings(struct net_device *netdev,
 
 	switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
 	case GELIC_LV1_ETHER_SPEED_10:
-		cmd->speed = SPEED_10;
+		ethtool_cmd_speed_set(cmd, SPEED_10);
 		break;
 	case GELIC_LV1_ETHER_SPEED_100:
-		cmd->speed = SPEED_100;
+		ethtool_cmd_speed_set(cmd, SPEED_100);
 		break;
 	case GELIC_LV1_ETHER_SPEED_1000:
-		cmd->speed = SPEED_1000;
+		ethtool_cmd_speed_set(cmd, SPEED_1000);
 		break;
 	default:
 		pr_info("%s: speed unknown\n", __func__);
-		cmd->speed = SPEED_10;
+		ethtool_cmd_speed_set(cmd, SPEED_10);
 		break;
 	}
 
@@ -1312,21 +1312,6 @@ static int gelic_ether_set_settings(struct net_device *netdev,
 	return 0;
 }
 
-u32 gelic_net_get_rx_csum(struct net_device *netdev)
-{
-	struct gelic_card *card = netdev_card(netdev);
-
-	return card->rx_csum;
-}
-
-int gelic_net_set_rx_csum(struct net_device *netdev, u32 data)
-{
-	struct gelic_card *card = netdev_card(netdev);
-
-	card->rx_csum = data;
-	return 0;
-}
-
 static void gelic_net_get_wol(struct net_device *netdev,
 			      struct ethtool_wolinfo *wol)
 {
@@ -1411,10 +1396,6 @@ static const struct ethtool_ops gelic_ether_ethtool_ops = {
 	.get_settings	= gelic_ether_get_settings,
 	.set_settings	= gelic_ether_set_settings,
 	.get_link	= ethtool_op_get_link,
-	.get_tx_csum	= ethtool_op_get_tx_csum,
-	.set_tx_csum	= ethtool_op_set_tx_csum,
-	.get_rx_csum	= gelic_net_get_rx_csum,
-	.set_rx_csum	= gelic_net_set_rx_csum,
 	.get_wol	= gelic_net_get_wol,
 	.set_wol	= gelic_net_set_wol,
 };
@@ -1512,7 +1493,11 @@ int __devinit gelic_net_setup_netdev(struct net_device *netdev,
 	int status;
 	u64 v1, v2;
 
+	netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+
 	netdev->features = NETIF_F_IP_CSUM;
+	if (GELIC_CARD_RX_CSUM_DEFAULT)
+		netdev->features |= NETIF_F_RXCSUM;
 
 	status = lv1_net_control(bus_id(card), dev_id(card),
 				 GELIC_LV1_GET_MAC_ADDRESS,
@@ -1756,7 +1741,6 @@ static int __devinit ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
 	/* setup card structure */
 	card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
 		GELIC_CARD_PORT_STATUS_CHANGED;
-	card->rx_csum = GELIC_CARD_RX_CSUM_DEFAULT;
 
 
 	if (gelic_card_init_chain(card, &card->tx_chain,
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index 32521ae5e82..d9a55b93898 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -117,7 +117,7 @@ enum gelic_descr_rx_error {
 	GELIC_DESCR_RXDATAERR	= 0x00020000, /* IP packet format error */
 	GELIC_DESCR_RXCALERR	= 0x00010000, /* cariier extension length
 					      * error */
-	GELIC_DESCR_RXCREXERR	= 0x00008000, /* carrier extention error */
+	GELIC_DESCR_RXCREXERR	= 0x00008000, /* carrier extension error */
 	GELIC_DESCR_RXMLTCST	= 0x00004000, /* multicast address frame */
 	/* bit 13..0 reserved */
 };
@@ -290,7 +290,6 @@ struct gelic_card {
 	struct gelic_descr_chain tx_chain;
 	struct gelic_descr_chain rx_chain;
 	int rx_dma_restart_required;
-	int rx_csum;
 	/*
 	 * tx_lock guards tx descriptor list and
 	 * tx_dma_progress.
@@ -377,8 +376,6 @@ extern int gelic_net_setup_netdev(struct net_device *netdev,
 /* shared ethtool ops */
 extern void gelic_net_get_drvinfo(struct net_device *netdev,
 				  struct ethtool_drvinfo *info);
-extern u32 gelic_net_get_rx_csum(struct net_device *netdev);
-extern int gelic_net_set_rx_csum(struct net_device *netdev, u32 data);
 extern void gelic_net_poll_controller(struct net_device *netdev);
 
 #endif /* _GELIC_NET_H */
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 4a624a29393..2e62938c0f8 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -814,7 +814,7 @@ static int gelic_wl_set_auth(struct net_device *netdev,
 			 * you will not decide suitable cipher from
 			 * its beacon.
 			 * You should have knowledge about the AP's
-			 * cipher infomation in other method prior to
+			 * cipher information in other method prior to
 			 * the association.
 			 */
 			if (!precise_ie())
@@ -2581,10 +2581,6 @@ static const struct net_device_ops gelic_wl_netdevice_ops = {
 static const struct ethtool_ops gelic_wl_ethtool_ops = {
 	.get_drvinfo	= gelic_net_get_drvinfo,
 	.get_link	= gelic_wl_get_link,
-	.get_tx_csum	= ethtool_op_get_tx_csum,
-	.set_tx_csum	= ethtool_op_set_tx_csum,
-	.get_rx_csum	= gelic_net_get_rx_csum,
-	.set_rx_csum	= gelic_net_set_rx_csum,
 };
 
 static void __devinit gelic_wl_setup_netdev_ops(struct net_device *netdev)
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c
index 1b63c8aef12..89f7540d90f 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/pxa168_eth.c
@@ -462,7 +462,7 @@ static u32 hash_function(unsigned char *mac_addr_orig)
  * pep - ETHERNET .
  * mac_addr - MAC address.
  * skip - if 1, skip this address.Used in case of deleting an entry which is a
- *	  part of chain in the hash table.We cant just delete the entry since
+ *	  part of chain in the hash table.We can't just delete the entry since
  *	  that will break the chain.We need to defragment the tables time to
  *	  time.
  * rd   - 0 Discard packet upon match.
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 348b4f1367c..d495a6859fd 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -1725,7 +1725,7 @@ static int ql_get_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
 	}
 	ecmd->advertising = ql_supported_modes(qdev);
 	ecmd->autoneg = ql_get_auto_cfg_status(qdev);
-	ecmd->speed = ql_get_speed(qdev);
+	ethtool_cmd_speed_set(ecmd, ql_get_speed(qdev));
 	ecmd->duplex = ql_get_full_dup(qdev);
 	return 0;
 }
@@ -3468,7 +3468,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
 {
 	struct net_device *ndev = qdev->ndev;
 	int err;
-	unsigned long irq_flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
+	unsigned long irq_flags = IRQF_SHARED;
 	unsigned long hw_flags;
 
 	if (ql_alloc_mem_resources(qdev)) {
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
index 3362a661248..73e234366a8 100644
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/qla3xxx.h
@@ -770,7 +770,7 @@ enum {
 	FM93C56A_WDS = 0x0,
 	FM93C56A_ERASE = 0x3,
 	FM93C56A_ERASE_ALL = 0x0,
-/* Command Extentions */
+/* Command Extensions */
 	FM93C56A_WEN_EXT = 0x3,
 	FM93C56A_WRITE_ALL_EXT = 0x1,
 	FM93C56A_WDS_EXT = 0x0,
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index dc44564ef6f..480ef5cb6ef 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -29,13 +29,15 @@
 
 #include <linux/io.h>
 #include <asm/byteorder.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
 
 #include "qlcnic_hdr.h"
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 15
-#define QLCNIC_LINUX_VERSIONID  "5.0.15"
+#define _QLCNIC_LINUX_SUBVERSION 18
+#define QLCNIC_LINUX_VERSIONID  "5.0.18"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
 		 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
@@ -93,12 +95,11 @@
 #define TX_IP_PKT	0x04
 #define TX_TCP_LSO	0x05
 #define TX_TCP_LSO6	0x06
-#define TX_IPSEC	0x07
-#define TX_IPSEC_CMD	0x0a
 #define TX_TCPV6_PKT	0x0b
 #define TX_UDPV6_PKT	0x0c
 
 /* Tx defines */
+#define QLCNIC_MAX_FRAGS_PER_TX	14
 #define MAX_TSO_HEADER_DESC	2
 #define MGMT_CMD_DESC_RESV	4
 #define TX_STOP_THRESH		((MAX_SKB_FRAGS >> 2) + MAX_TSO_HEADER_DESC \
@@ -117,7 +118,6 @@
 #define PHAN_PEG_RCV_INITIALIZED	0xff01
 
 #define NUM_RCV_DESC_RINGS	3
-#define NUM_STS_DESC_RINGS	4
 
 #define RCV_RING_NORMAL 0
 #define RCV_RING_JUMBO	1
@@ -200,7 +200,7 @@ struct rcv_desc {
 	__le16 reserved;
 	__le32 buffer_length;	/* allocated buffer length (usually 2K) */
 	__le64 addr_buffer;
-};
+} __packed;
 
 /* opcode field in status_desc */
 #define QLCNIC_SYN_OFFLOAD	0x03
@@ -292,6 +292,7 @@ struct uni_data_desc{
 /* Flash Defines and Structures */
 #define QLCNIC_FLT_LOCATION	0x3F1000
 #define QLCNIC_FW_IMAGE_REGION	0x74
+#define QLCNIC_BOOTLD_REGION    0X72
 struct qlcnic_flt_header {
 	u16 version;
 	u16 len;
@@ -306,7 +307,7 @@ struct qlcnic_flt_entry {
 	u8 reserved1;
 	u32 size;
 	u32 start_addr;
-	u32 end_add;
+	u32 end_addr;
 };
 
 /* Magic number to let user know flash is programmed */
@@ -365,12 +366,6 @@ struct qlcnic_skb_frag {
 	u64 length;
 };
 
-struct qlcnic_recv_crb {
-	u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
-	u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
-	u32 sw_int_mask[NUM_STS_DESC_RINGS];
-};
-
 /*    Following defines are for the state of the buffers    */
 #define	QLCNIC_BUFFER_FREE	0
 #define	QLCNIC_BUFFER_BUSY	1
@@ -387,10 +382,10 @@ struct qlcnic_cmd_buffer {
 
 /* In rx_buffer, we do not need multiple fragments as is a single buffer */
 struct qlcnic_rx_buffer {
-	struct list_head list;
+	u16 ref_handle;
 	struct sk_buff *skb;
+	struct list_head list;
 	u64 dma;
-	u16 ref_handle;
 };
 
 /* Board types */
@@ -398,6 +393,48 @@ struct qlcnic_rx_buffer {
 #define	QLCNIC_XGBE	0x02
 
 /*
+ * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
+ * adjusted based on configured MTU.
+ */
+#define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US	3
+#define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS	256
+
+#define QLCNIC_INTR_DEFAULT			0x04
+#define QLCNIC_CONFIG_INTR_COALESCE		3
+
+struct qlcnic_nic_intr_coalesce {
+	u8	type;
+	u8	sts_ring_mask;
+	u16	rx_packets;
+	u16	rx_time_us;
+	u16	flag;
+	u32	timer_out;
+};
+
+struct qlcnic_dump_template_hdr {
+	__le32	type;
+	__le32	offset;
+	__le32	size;
+	__le32	cap_mask;
+	__le32	num_entries;
+	__le32	version;
+	__le32	timestamp;
+	__le32	checksum;
+	__le32	drv_cap_mask;
+	__le32	sys_info[3];
+	__le32	saved_state[16];
+	__le32	cap_sizes[8];
+	__le32	rsvd[0];
+};
+
+struct qlcnic_fw_dump {
+	u8	clr;	/* flag to indicate if dump is cleared */
+	u32	size;	/* total size of the dump */
+	void	*data;	/* dump data area */
+	struct	qlcnic_dump_template_hdr *tmpl_hdr;
+};
+
+/*
  * One hardware_context{} per adapter
  * contains interrupt info as well shared hardware info.
  */
@@ -415,6 +452,9 @@ struct qlcnic_hardware_context {
 	u8 linkup;
 	u16 port_type;
 	u16 board_type;
+
+	struct qlcnic_nic_intr_coalesce coal;
+	struct qlcnic_fw_dump fw_dump;
 };
 
 struct qlcnic_adapter_stats {
@@ -442,50 +482,49 @@ struct qlcnic_adapter_stats {
  * be one Rcv Descriptor for normal packets, one for jumbo and may be others.
  */
 struct qlcnic_host_rds_ring {
-	u32 producer;
+	void __iomem *crb_rcv_producer;
+	struct rcv_desc *desc_head;
+	struct qlcnic_rx_buffer *rx_buf_arr;
 	u32 num_desc;
+	u32 producer;
 	u32 dma_size;
 	u32 skb_size;
 	u32 flags;
-	void __iomem *crb_rcv_producer;
-	struct rcv_desc *desc_head;
-	struct qlcnic_rx_buffer *rx_buf_arr;
 	struct list_head free_list;
 	spinlock_t lock;
 	dma_addr_t phys_addr;
-};
+} ____cacheline_internodealigned_in_smp;
 
 struct qlcnic_host_sds_ring {
 	u32 consumer;
 	u32 num_desc;
 	void __iomem *crb_sts_consumer;
-	void __iomem *crb_intr_mask;
 
 	struct status_desc *desc_head;
 	struct qlcnic_adapter *adapter;
 	struct napi_struct napi;
 	struct list_head free_list[NUM_RCV_DESC_RINGS];
 
+	void __iomem *crb_intr_mask;
 	int irq;
 
 	dma_addr_t phys_addr;
 	char name[IFNAMSIZ+4];
-};
+} ____cacheline_internodealigned_in_smp;
 
 struct qlcnic_host_tx_ring {
 	u32 producer;
-	__le32 *hw_consumer;
 	u32 sw_consumer;
-	void __iomem *crb_cmd_producer;
 	u32 num_desc;
-
-	struct netdev_queue *txq;
-
-	struct qlcnic_cmd_buffer *cmd_buf_arr;
+	void __iomem *crb_cmd_producer;
 	struct cmd_desc_type0 *desc_head;
+	struct qlcnic_cmd_buffer *cmd_buf_arr;
+	__le32 *hw_consumer;
+
 	dma_addr_t phys_addr;
 	dma_addr_t hw_cons_phys_addr;
-};
+	struct netdev_queue *txq;
+} ____cacheline_internodealigned_in_smp;
 
 /*
  * Receive context. There is one such structure per instance of the
@@ -494,12 +533,12 @@ struct qlcnic_host_tx_ring {
  * present elsewhere.
  */
 struct qlcnic_recv_context {
+	struct qlcnic_host_rds_ring *rds_rings;
+	struct qlcnic_host_sds_ring *sds_rings;
 	u32 state;
 	u16 context_id;
 	u16 virt_port;
 
-	struct qlcnic_host_rds_ring *rds_rings;
-	struct qlcnic_host_sds_ring *sds_rings;
 };
 
 /* HW context creation */
@@ -538,9 +577,6 @@ struct qlcnic_recv_context {
 #define QLCNIC_CDRP_CMD_DESTROY_RX_CTX          0x00000008
 #define QLCNIC_CDRP_CMD_CREATE_TX_CTX           0x00000009
 #define QLCNIC_CDRP_CMD_DESTROY_TX_CTX          0x0000000a
-#define QLCNIC_CDRP_CMD_SETUP_STATISTICS        0x0000000e
-#define QLCNIC_CDRP_CMD_GET_STATISTICS          0x0000000f
-#define QLCNIC_CDRP_CMD_DELETE_STATISTICS       0x00000010
 #define QLCNIC_CDRP_CMD_SET_MTU                 0x00000012
 #define QLCNIC_CDRP_CMD_READ_PHY		0x00000013
 #define QLCNIC_CDRP_CMD_WRITE_PHY		0x00000014
@@ -549,17 +585,11 @@ struct qlcnic_recv_context {
 #define QLCNIC_CDRP_CMD_SET_FLOW_CTL		0x00000017
 #define QLCNIC_CDRP_CMD_READ_MAX_MTU		0x00000018
 #define QLCNIC_CDRP_CMD_READ_MAX_LRO		0x00000019
-#define QLCNIC_CDRP_CMD_CONFIGURE_TOE		0x0000001a
-#define QLCNIC_CDRP_CMD_FUNC_ATTRIB		0x0000001b
-#define QLCNIC_CDRP_CMD_READ_PEXQ_PARAMETERS	0x0000001c
-#define QLCNIC_CDRP_CMD_GET_LIC_CAPABILITIES	0x0000001d
-#define QLCNIC_CDRP_CMD_READ_MAX_LRO_PER_BOARD	0x0000001e
 #define QLCNIC_CDRP_CMD_MAC_ADDRESS		0x0000001f
 
 #define QLCNIC_CDRP_CMD_GET_PCI_INFO		0x00000020
 #define QLCNIC_CDRP_CMD_GET_NIC_INFO		0x00000021
 #define QLCNIC_CDRP_CMD_SET_NIC_INFO		0x00000022
-#define QLCNIC_CDRP_CMD_RESET_NPAR		0x00000023
 #define QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY	0x00000024
 #define QLCNIC_CDRP_CMD_TOGGLE_ESWITCH		0x00000025
 #define QLCNIC_CDRP_CMD_GET_ESWITCH_STATUS	0x00000026
@@ -567,8 +597,12 @@ struct qlcnic_recv_context {
 #define QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH	0x00000028
 #define QLCNIC_CDRP_CMD_GET_ESWITCH_PORT_CONFIG	0x00000029
 #define QLCNIC_CDRP_CMD_GET_ESWITCH_STATS	0x0000002a
+#define QLCNIC_CDRP_CMD_CONFIG_PORT		0x0000002E
+#define QLCNIC_CDRP_CMD_TEMP_SIZE		0x0000002f
+#define QLCNIC_CDRP_CMD_GET_TEMP_HDR		0x00000030
 
 #define QLCNIC_RCODE_SUCCESS		0
+#define QLCNIC_RCODE_NOT_SUPPORTED	9
 #define QLCNIC_RCODE_TIMEOUT		17
 #define QLCNIC_DESTROY_CTX_RESET	0
 
@@ -597,14 +631,14 @@ struct qlcnic_hostrq_sds_ring {
 	__le32 ring_size;		/* Ring entries */
 	__le16 msi_index;
 	__le16 rsvd;		/* Padding */
-};
+} __packed;
 
 struct qlcnic_hostrq_rds_ring {
 	__le64 host_phys_addr;	/* Ring base addr */
 	__le64 buff_size;		/* Packet buffer size */
 	__le32 ring_size;		/* Ring entries */
 	__le32 ring_kind;		/* Class of ring */
-};
+} __packed;
 
 struct qlcnic_hostrq_rx_ctx {
 	__le64 host_rsp_dma_addr;	/* Response dma'd here */
@@ -625,17 +659,17 @@ struct qlcnic_hostrq_rx_ctx {
 	   - N hostrq_rds_rings
 	   - N hostrq_sds_rings */
 	char data[0];
-};
+} __packed;
 
 struct qlcnic_cardrsp_rds_ring{
 	__le32 host_producer_crb;	/* Crb to use */
 	__le32 rsvd1;		/* Padding */
-};
+} __packed;
 
 struct qlcnic_cardrsp_sds_ring {
 	__le32 host_consumer_crb;	/* Crb to use */
 	__le32 interrupt_crb;	/* Crb to use */
-};
+} __packed;
 
 struct qlcnic_cardrsp_rx_ctx {
 	/* These ring offsets are relative to data[0] below */
@@ -654,7 +688,7 @@ struct qlcnic_cardrsp_rx_ctx {
 	   - N cardrsp_rds_rings
 	   - N cardrs_sds_rings */
 	char data[0];
-};
+} __packed;
 
 #define SIZEOF_HOSTRQ_RX(HOSTRQ_RX, rds_rings, sds_rings)	\
 	(sizeof(HOSTRQ_RX) + 					\
@@ -674,7 +708,7 @@ struct qlcnic_hostrq_cds_ring {
 	__le64 host_phys_addr;	/* Ring base addr */
 	__le32 ring_size;		/* Ring entries */
 	__le32 rsvd;		/* Padding */
-};
+} __packed;
 
 struct qlcnic_hostrq_tx_ctx {
 	__le64 host_rsp_dma_addr;	/* Response dma'd here */
@@ -689,12 +723,12 @@ struct qlcnic_hostrq_tx_ctx {
 	__le16 rsvd3;		/* Padding */
 	struct qlcnic_hostrq_cds_ring cds_ring;	/* Desc of cds ring */
 	u8  reserved[128];	/* future expansion */
-};
+} __packed;
 
 struct qlcnic_cardrsp_cds_ring {
 	__le32 host_producer_crb;	/* Crb to use */
 	__le32 interrupt_crb;	/* Crb to use */
-};
+} __packed;
 
 struct qlcnic_cardrsp_tx_ctx {
 	__le32 host_ctx_state;	/* Starting state */
@@ -703,7 +737,7 @@ struct qlcnic_cardrsp_tx_ctx {
 	u8  virt_port;		/* Virtual/Logical id of port */
 	struct qlcnic_cardrsp_cds_ring cds_ring;	/* Card cds settings */
 	u8  reserved[128];	/* future expansion */
-};
+} __packed;
 
 #define SIZEOF_HOSTRQ_TX(HOSTRQ_TX)	(sizeof(HOSTRQ_TX))
 #define SIZEOF_CARDRSP_TX(CARDRSP_TX)	(sizeof(CARDRSP_TX))
@@ -737,40 +771,6 @@ struct qlcnic_mac_list_s {
 	uint8_t mac_addr[ETH_ALEN+2];
 };
 
-/*
- * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
- * adjusted based on configured MTU.
- */
-#define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US	3
-#define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS	256
-#define QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS	64
-#define QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US	4
-
-#define QLCNIC_INTR_DEFAULT			0x04
-
-union qlcnic_nic_intr_coalesce_data {
-	struct {
-		u16	rx_packets;
-		u16	rx_time_us;
-		u16	tx_packets;
-		u16	tx_time_us;
-	} data;
-	u64		word;
-};
-
-struct qlcnic_nic_intr_coalesce {
-	u16		stats_time_us;
-	u16		rate_sample_time;
-	u16		flags;
-	u16		rsvd_1;
-	u32		low_threshold;
-	u32		high_threshold;
-	union qlcnic_nic_intr_coalesce_data	normal;
-	union qlcnic_nic_intr_coalesce_data	low;
-	union qlcnic_nic_intr_coalesce_data	high;
-	union qlcnic_nic_intr_coalesce_data	irq;
-};
-
 #define QLCNIC_HOST_REQUEST	0x13
 #define QLCNIC_REQUEST		0x14
 
@@ -782,50 +782,20 @@ struct qlcnic_nic_intr_coalesce {
 /*
  * Driver --> Firmware
  */
-#define QLCNIC_H2C_OPCODE_START 			0
-#define QLCNIC_H2C_OPCODE_CONFIG_RSS			1
-#define QLCNIC_H2C_OPCODE_CONFIG_RSS_TBL		2
-#define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE		3
-#define QLCNIC_H2C_OPCODE_CONFIG_LED			4
-#define QLCNIC_H2C_OPCODE_CONFIG_PROMISCUOUS		5
-#define QLCNIC_H2C_OPCODE_CONFIG_L2_MAC 		6
-#define QLCNIC_H2C_OPCODE_LRO_REQUEST			7
-#define QLCNIC_H2C_OPCODE_GET_SNMP_STATS		8
-#define QLCNIC_H2C_OPCODE_PROXY_START_REQUEST		9
-#define QLCNIC_H2C_OPCODE_PROXY_STOP_REQUEST		10
-#define QLCNIC_H2C_OPCODE_PROXY_SET_MTU 		11
-#define QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE	12
-#define QLCNIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST	13
-#define QLCNIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST	14
-#define QLCNIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST	15
-#define QLCNIC_H2C_OPCODE_GET_NET_STATS 		16
-#define QLCNIC_H2C_OPCODE_PROXY_UPDATE_P2V		17
-#define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 		18
-#define QLCNIC_H2C_OPCODE_PROXY_STOP_DONE		20
-#define QLCNIC_H2C_OPCODE_GET_LINKEVENT 		21
-#define QLCNIC_C2C_OPCODE				22
-#define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING		23
-#define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO 		24
-#define QLCNIC_H2C_OPCODE_LAST				25
+#define QLCNIC_H2C_OPCODE_CONFIG_RSS			0x1
+#define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE		0x3
+#define QLCNIC_H2C_OPCODE_CONFIG_LED			0x4
+#define QLCNIC_H2C_OPCODE_LRO_REQUEST			0x7
+#define QLCNIC_H2C_OPCODE_SET_MAC_RECEIVE_MODE		0xc
+#define QLCNIC_H2C_OPCODE_CONFIG_IPADDR		0x12
+#define QLCNIC_H2C_OPCODE_GET_LINKEVENT		0x15
+#define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING		0x17
+#define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO		0x18
 /*
  * Firmware --> Driver
  */
 
-#define QLCNIC_C2H_OPCODE_START 			128
-#define QLCNIC_C2H_OPCODE_CONFIG_RSS_RESPONSE		129
-#define QLCNIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE	130
-#define QLCNIC_C2H_OPCODE_CONFIG_MAC_RESPONSE		131
-#define QLCNIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE	132
-#define QLCNIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE	133
-#define QLCNIC_C2H_OPCODE_LRO_DELETE_RESPONSE		134
-#define QLCNIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE	135
-#define QLCNIC_C2H_OPCODE_GET_SNMP_STATS		136
-#define QLCNIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY	137
-#define QLCNIC_C2H_OPCODE_INSTALL_LICENSE_REPLY 	138
-#define QLCNIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139
-#define QLCNIC_C2H_OPCODE_GET_NET_STATS_RESPONSE	140
 #define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE	141
-#define QLCNIC_C2H_OPCODE_LAST				142
 
 #define VPORT_MISS_MODE_DROP		0 /* drop all unmatched */
 #define VPORT_MISS_MODE_ACCEPT_ALL	1 /* accept all packets */
@@ -894,7 +864,7 @@ struct qlcnic_nic_req {
 	__le64 qhdr;
 	__le64 req_hdr;
 	__le64 words[6];
-};
+} __packed;
 
 struct qlcnic_mac_req {
 	u8 op;
@@ -905,7 +875,7 @@ struct qlcnic_mac_req {
 struct qlcnic_vlan_req {
 	__le16 vlan_id;
 	__le16 rsvd[3];
-};
+} __packed;
 
 struct qlcnic_ipaddr {
 	__be32 ipv4;
@@ -928,7 +898,8 @@ struct qlcnic_ipaddr {
 #define QLCNIC_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
 
-#define MSIX_ENTRIES_PER_ADAPTER	NUM_STS_DESC_RINGS
+#define QLCNIC_DEF_NUM_STS_DESC_RINGS	4
+#define QLCNIC_MIN_NUM_RSS_RINGS	2
 #define QLCNIC_MSIX_TBL_SPACE		8192
 #define QLCNIC_PCI_REG_MSIX_TBL 	0x44
 #define QLCNIC_MSIX_TBL_PGSIZE		4096
@@ -941,6 +912,7 @@ struct qlcnic_ipaddr {
 #define __QLCNIC_RESETTING		2
 #define __QLCNIC_START_FW 		4
 #define __QLCNIC_AER			5
+#define __QLCNIC_DIAG_RES_ALLOC		6
 
 #define QLCNIC_INTERRUPT_TEST		1
 #define QLCNIC_LOOPBACK_TEST		2
@@ -964,14 +936,14 @@ struct qlcnic_filter_hash {
 };
 
 struct qlcnic_adapter {
-	struct qlcnic_hardware_context ahw;
-
+	struct qlcnic_hardware_context *ahw;
+	struct qlcnic_recv_context *recv_ctx;
+	struct qlcnic_host_tx_ring *tx_ring;
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct list_head mac_list;
 
-	spinlock_t tx_clean_lock;
-	spinlock_t mac_learn_lock;
+	unsigned long state;
+	u32 flags;
 
 	u16 num_txd;
 	u16 num_rxd;
@@ -982,14 +954,12 @@ struct qlcnic_adapter {
 	u8 max_rds_rings;
 	u8 max_sds_rings;
 	u8 msix_supported;
-	u8 rx_csum;
 	u8 portnum;
 	u8 physical_port;
 	u8 reset_context;
 
 	u8 mc_enabled;
 	u8 max_mc_count;
-	u8 rss_supported;
 	u8 fw_wait_cnt;
 	u8 fw_fail_cnt;
 	u8 tx_timeo_cnt;
@@ -1014,7 +984,6 @@ struct qlcnic_adapter {
 
 	u32 fw_hal_version;
 	u32 capabilities;
-	u32 flags;
 	u32 irq;
 	u32 temp;
 
@@ -1032,31 +1001,29 @@ struct qlcnic_adapter {
 	u8 mac_addr[ETH_ALEN];
 
 	u64 dev_rst_time;
+	unsigned long vlans[BITS_TO_LONGS(VLAN_N_VID)];
 
-	struct vlan_group *vlgrp;
 	struct qlcnic_npar_info *npars;
 	struct qlcnic_eswitch *eswitch;
 	struct qlcnic_nic_template *nic_ops;
 
 	struct qlcnic_adapter_stats stats;
-
-	struct qlcnic_recv_context recv_ctx;
-	struct qlcnic_host_tx_ring *tx_ring;
+	struct list_head mac_list;
 
 	void __iomem	*tgt_mask_reg;
 	void __iomem	*tgt_status_reg;
 	void __iomem	*crb_int_state_reg;
 	void __iomem	*isr_int_vec;
 
-	struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+	struct msix_entry *msix_entries;
 
 	struct delayed_work fw_work;
 
-	struct qlcnic_nic_intr_coalesce coal;
 
 	struct qlcnic_filter_hash fhash;
 
-	unsigned long state;
+	spinlock_t tx_clean_lock;
+	spinlock_t mac_learn_lock;
 	__le32 file_prd_off;	/*File fw product offset*/
 	u32 fw_version;
 	const struct firmware *fw;
@@ -1078,7 +1045,7 @@ struct qlcnic_info {
 	__le16	min_tx_bw;
 	__le16	max_tx_bw;
 	u8	reserved2[104];
-};
+} __packed;
 
 struct qlcnic_pci_info {
 	__le16	id; /* pci function id */
@@ -1092,7 +1059,7 @@ struct qlcnic_pci_info {
 
 	u8	mac[ETH_ALEN];
 	u8	reserved2[106];
-};
+} __packed;
 
 struct qlcnic_npar_info {
 	u16	pvid;
@@ -1209,15 +1176,160 @@ struct __qlcnic_esw_statistics {
 	__le64 local_frames;
 	__le64 numbytes;
 	__le64 rsvd[3];
-};
+} __packed;
 
 struct qlcnic_esw_statistics {
 	struct __qlcnic_esw_statistics rx;
 	struct __qlcnic_esw_statistics tx;
 };
 
-int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
-int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
+struct qlcnic_common_entry_hdr {
+	__le32	type;
+	__le32	offset;
+	__le32	cap_size;
+	u8	mask;
+	u8	rsvd[2];
+	u8	flags;
+} __packed;
+
+struct __crb {
+	__le32	addr;
+	u8	stride;
+	u8	rsvd1[3];
+	__le32	data_size;
+	__le32	no_ops;
+	__le32	rsvd2[4];
+} __packed;
+
+struct __ctrl {
+	__le32	addr;
+	u8	stride;
+	u8	index_a;
+	__le16	timeout;
+	__le32	data_size;
+	__le32	no_ops;
+	u8	opcode;
+	u8	index_v;
+	u8	shl_val;
+	u8	shr_val;
+	__le32	val1;
+	__le32	val2;
+	__le32	val3;
+} __packed;
+
+struct __cache {
+	__le32	addr;
+	u8	stride;
+	u8	rsvd;
+	__le16	init_tag_val;
+	__le32	size;
+	__le32	no_ops;
+	__le32	ctrl_addr;
+	__le32	ctrl_val;
+	__le32	read_addr;
+	u8	read_addr_stride;
+	u8	read_addr_num;
+	u8	rsvd1[2];
+} __packed;
+
+struct __ocm {
+	u8	rsvd[8];
+	__le32	size;
+	__le32	no_ops;
+	u8	rsvd1[8];
+	__le32	read_addr;
+	__le32	read_addr_stride;
+} __packed;
+
+struct __mem {
+	u8	rsvd[24];
+	__le32	addr;
+	__le32	size;
+} __packed;
+
+struct __mux {
+	__le32	addr;
+	u8	rsvd[4];
+	__le32	size;
+	__le32	no_ops;
+	__le32	val;
+	__le32	val_stride;
+	__le32	read_addr;
+	u8	rsvd2[4];
+} __packed;
+
+struct __queue {
+	__le32	sel_addr;
+	__le16	stride;
+	u8	rsvd[2];
+	__le32	size;
+	__le32	no_ops;
+	u8	rsvd2[8];
+	__le32	read_addr;
+	u8	read_addr_stride;
+	u8	read_addr_cnt;
+	u8	rsvd3[2];
+} __packed;
+
+struct qlcnic_dump_entry {
+	struct qlcnic_common_entry_hdr hdr;
+	union {
+		struct __crb	crb;
+		struct __cache	cache;
+		struct __ocm	ocm;
+		struct __mem	mem;
+		struct __mux	mux;
+		struct __queue	que;
+		struct __ctrl	ctrl;
+	} region;
+} __packed;
+
+enum op_codes {
+	QLCNIC_DUMP_NOP		= 0,
+	QLCNIC_DUMP_READ_CRB	= 1,
+	QLCNIC_DUMP_READ_MUX	= 2,
+	QLCNIC_DUMP_QUEUE	= 3,
+	QLCNIC_DUMP_BRD_CONFIG	= 4,
+	QLCNIC_DUMP_READ_OCM	= 6,
+	QLCNIC_DUMP_PEG_REG	= 7,
+	QLCNIC_DUMP_L1_DTAG	= 8,
+	QLCNIC_DUMP_L1_ITAG	= 9,
+	QLCNIC_DUMP_L1_DATA	= 11,
+	QLCNIC_DUMP_L1_INST	= 12,
+	QLCNIC_DUMP_L2_DTAG	= 21,
+	QLCNIC_DUMP_L2_ITAG	= 22,
+	QLCNIC_DUMP_L2_DATA	= 23,
+	QLCNIC_DUMP_L2_INST	= 24,
+	QLCNIC_DUMP_READ_ROM	= 71,
+	QLCNIC_DUMP_READ_MEM	= 72,
+	QLCNIC_DUMP_READ_CTRL	= 98,
+	QLCNIC_DUMP_TLHDR	= 99,
+	QLCNIC_DUMP_RDEND	= 255
+};
+
+#define QLCNIC_DUMP_WCRB	BIT_0
+#define QLCNIC_DUMP_RWCRB	BIT_1
+#define QLCNIC_DUMP_ANDCRB	BIT_2
+#define QLCNIC_DUMP_ORCRB	BIT_3
+#define QLCNIC_DUMP_POLLCRB	BIT_4
+#define QLCNIC_DUMP_RD_SAVE	BIT_5
+#define QLCNIC_DUMP_WRT_SAVED	BIT_6
+#define QLCNIC_DUMP_MOD_SAVE_ST	BIT_7
+#define QLCNIC_DUMP_SKIP	BIT_7
+
+#define QLCNIC_DUMP_MASK_MIN		3
+#define QLCNIC_DUMP_MASK_DEF		0x0f
+#define QLCNIC_DUMP_MASK_MAX		0xff
+#define QLCNIC_FORCE_FW_DUMP_KEY	0xdeadfeed
+
+struct qlcnic_dump_operations {
+	enum op_codes opcode;
+	u32 (*handler)(struct qlcnic_adapter *,
+			struct qlcnic_dump_entry *, u32 *);
+};
+
+int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter);
+int qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config);
 
 u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off);
 int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
@@ -1263,6 +1375,7 @@ int qlcnic_wol_supported(struct qlcnic_adapter *adapter);
 int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate);
 void qlcnic_prune_lb_filters(struct qlcnic_adapter *adapter);
 void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter);
+int qlcnic_dump_fw(struct qlcnic_adapter *);
 
 /* Functions from qlcnic_init.c */
 int qlcnic_load_firmware(struct qlcnic_adapter *adapter);
@@ -1273,7 +1386,7 @@ int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter);
 int qlcnic_setup_idc_param(struct qlcnic_adapter *adapter);
 int qlcnic_check_flash_fw_ver(struct qlcnic_adapter *adapter);
 
-int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp);
+int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, u32 addr, u32 *valp);
 int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
 				u8 *bytes, size_t size);
 int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter);
@@ -1293,7 +1406,7 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter);
 
 int qlcnic_check_fw_status(struct qlcnic_adapter *adapter);
 void qlcnic_watchdog_task(struct work_struct *work);
-void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
+void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter,
 		struct qlcnic_host_rds_ring *rds_ring);
 int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max);
 void qlcnic_set_multi(struct net_device *netdev);
@@ -1307,6 +1420,8 @@ void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup);
 
 int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu);
 int qlcnic_change_mtu(struct net_device *netdev, int new_mtu);
+u32 qlcnic_fix_features(struct net_device *netdev, u32 features);
+int qlcnic_set_features(struct net_device *netdev, u32 features);
 int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable);
 int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable);
 int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter);
@@ -1321,6 +1436,9 @@ u32 qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
 void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings);
 int qlcnic_diag_alloc_res(struct net_device *netdev, int test);
 netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+int qlcnic_validate_max_rss(struct net_device *netdev, u8 max_hw, u8 val);
+int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data);
+void qlcnic_dev_request_reset(struct qlcnic_adapter *);
 
 /* Management functions */
 int qlcnic_get_mac_address(struct qlcnic_adapter *, u8*);
@@ -1378,8 +1496,7 @@ static const struct qlcnic_brdinfo qlcnic_boards[] = {
 
 static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring)
 {
-	smp_mb();
-	if (tx_ring->producer < tx_ring->sw_consumer)
+	if (likely(tx_ring->producer < tx_ring->sw_consumer))
 		return tx_ring->sw_consumer - tx_ring->producer;
 	else
 		return tx_ring->sw_consumer + tx_ring->num_desc -
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c
index 27631f23b3f..bab041a5c75 100644
--- a/drivers/net/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/qlcnic/qlcnic_ctx.c
@@ -64,14 +64,105 @@ qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
 	return rcode;
 }
 
+static uint32_t qlcnic_temp_checksum(uint32_t *temp_buffer, u16 temp_size)
+{
+	uint64_t sum = 0;
+	int count = temp_size / sizeof(uint32_t);
+	while (count-- > 0)
+		sum += *temp_buffer++;
+	while (sum >> 32)
+		sum = (sum & 0xFFFFFFFF) + (sum >> 32);
+	return ~sum;
+}
+
+int qlcnic_fw_cmd_get_minidump_temp(struct qlcnic_adapter *adapter)
+{
+	int err, i;
+	u16 temp_size;
+	void *tmp_addr;
+	u32 version, csum, *template, *tmp_buf;
+	struct qlcnic_hardware_context *ahw;
+	struct qlcnic_dump_template_hdr *tmpl_hdr, *tmp_tmpl;
+	dma_addr_t tmp_addr_t = 0;
+
+	ahw = adapter->ahw;
+	err = qlcnic_issue_cmd(adapter,
+			adapter->ahw->pci_func,
+			adapter->fw_hal_version,
+			0,
+			0,
+			0,
+			QLCNIC_CDRP_CMD_TEMP_SIZE);
+	if (err != QLCNIC_RCODE_SUCCESS) {
+		err = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
+		dev_err(&adapter->pdev->dev,
+			"Failed to get template size %d\n", err);
+		err = -EIO;
+		return err;
+	}
+	version = QLCRD32(adapter, QLCNIC_ARG3_CRB_OFFSET);
+	temp_size = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);
+	if (!temp_size)
+		return -EIO;
+
+	tmp_addr = dma_alloc_coherent(&adapter->pdev->dev, temp_size,
+			&tmp_addr_t, GFP_KERNEL);
+	if (!tmp_addr) {
+		dev_err(&adapter->pdev->dev,
+			"Can't get memory for FW dump template\n");
+		return -ENOMEM;
+	}
+	err = qlcnic_issue_cmd(adapter,
+		adapter->ahw->pci_func,
+		adapter->fw_hal_version,
+		LSD(tmp_addr_t),
+		MSD(tmp_addr_t),
+		temp_size,
+		QLCNIC_CDRP_CMD_GET_TEMP_HDR);
+
+	if (err != QLCNIC_RCODE_SUCCESS) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to get mini dump template header %d\n", err);
+		err = -EIO;
+		goto error;
+	}
+	tmp_tmpl = (struct qlcnic_dump_template_hdr *) tmp_addr;
+	csum = qlcnic_temp_checksum((uint32_t *) tmp_addr, temp_size);
+	if (csum) {
+		dev_err(&adapter->pdev->dev,
+			"Template header checksum validation failed\n");
+		err = -EIO;
+		goto error;
+	}
+	ahw->fw_dump.tmpl_hdr = vzalloc(temp_size);
+	if (!ahw->fw_dump.tmpl_hdr) {
+		err = -EIO;
+		goto error;
+	}
+	tmp_buf = (u32 *) tmp_addr;
+	template = (u32 *) ahw->fw_dump.tmpl_hdr;
+	for (i = 0; i < temp_size/sizeof(u32); i++)
+		*template++ = __le32_to_cpu(*tmp_buf++);
+
+	tmpl_hdr = ahw->fw_dump.tmpl_hdr;
+	if (tmpl_hdr->cap_mask > QLCNIC_DUMP_MASK_DEF &&
+		tmpl_hdr->cap_mask <= QLCNIC_DUMP_MASK_MAX)
+		tmpl_hdr->drv_cap_mask = tmpl_hdr->cap_mask;
+	else
+		tmpl_hdr->drv_cap_mask = QLCNIC_DUMP_MASK_DEF;
+error:
+	dma_free_coherent(&adapter->pdev->dev, temp_size, tmp_addr, tmp_addr_t);
+	return err;
+}
+
 int
 qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu)
 {
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	if (recv_ctx->state == QLCNIC_HOST_CTX_STATE_ACTIVE) {
 		if (qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			recv_ctx->context_id,
 			mtu,
@@ -102,12 +193,12 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 	dma_addr_t hostrq_phys_addr, cardrsp_phys_addr;
 	u64 phys_addr;
 
-	int i, nrds_rings, nsds_rings;
+	u8 i, nrds_rings, nsds_rings;
 	size_t rq_size, rsp_size;
 	u32 cap, reg, val, reg2;
 	int err;
 
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	nrds_rings = adapter->max_rds_rings;
 	nsds_rings = adapter->max_sds_rings;
@@ -119,14 +210,14 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 		SIZEOF_CARDRSP_RX(struct qlcnic_cardrsp_rx_ctx, nrds_rings,
 						nsds_rings);
 
-	addr = pci_alloc_consistent(adapter->pdev,
-				rq_size, &hostrq_phys_addr);
+	addr = dma_alloc_coherent(&adapter->pdev->dev, rq_size,
+			&hostrq_phys_addr, GFP_KERNEL);
 	if (addr == NULL)
 		return -ENOMEM;
 	prq = (struct qlcnic_hostrq_rx_ctx *)addr;
 
-	addr = pci_alloc_consistent(adapter->pdev,
-			rsp_size, &cardrsp_phys_addr);
+	addr = dma_alloc_coherent(&adapter->pdev->dev, rsp_size,
+			&cardrsp_phys_addr, GFP_KERNEL);
 	if (addr == NULL) {
 		err = -ENOMEM;
 		goto out_free_rq;
@@ -151,7 +242,7 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 
 	prq->num_rds_rings = cpu_to_le16(nrds_rings);
 	prq->num_sds_rings = cpu_to_le16(nsds_rings);
-	prq->rds_ring_offset = cpu_to_le32(0);
+	prq->rds_ring_offset = 0;
 
 	val = le32_to_cpu(prq->rds_ring_offset) +
 		(sizeof(struct qlcnic_hostrq_rds_ring) * nrds_rings);
@@ -187,7 +278,7 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 
 	phys_addr = hostrq_phys_addr;
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			(u32)(phys_addr >> 32),
 			(u32)(phys_addr & 0xffffffff),
@@ -207,7 +298,7 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 		rds_ring = &recv_ctx->rds_rings[i];
 
 		reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
-		rds_ring->crb_rcv_producer = adapter->ahw.pci_base0 + reg;
+		rds_ring->crb_rcv_producer = adapter->ahw->pci_base0 + reg;
 	}
 
 	prsp_sds = ((struct qlcnic_cardrsp_sds_ring *)
@@ -219,8 +310,8 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 		reg = le32_to_cpu(prsp_sds[i].host_consumer_crb);
 		reg2 = le32_to_cpu(prsp_sds[i].interrupt_crb);
 
-		sds_ring->crb_sts_consumer = adapter->ahw.pci_base0 + reg;
-		sds_ring->crb_intr_mask = adapter->ahw.pci_base0 + reg2;
+		sds_ring->crb_sts_consumer = adapter->ahw->pci_base0 + reg;
+		sds_ring->crb_intr_mask = adapter->ahw->pci_base0 + reg2;
 	}
 
 	recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
@@ -228,19 +319,20 @@ qlcnic_fw_cmd_create_rx_ctx(struct qlcnic_adapter *adapter)
 	recv_ctx->virt_port = prsp->virt_port;
 
 out_free_rsp:
-	pci_free_consistent(adapter->pdev, rsp_size, prsp, cardrsp_phys_addr);
+	dma_free_coherent(&adapter->pdev->dev, rsp_size, prsp,
+		cardrsp_phys_addr);
 out_free_rq:
-	pci_free_consistent(adapter->pdev, rq_size, prq, hostrq_phys_addr);
+	dma_free_coherent(&adapter->pdev->dev, rq_size, prq, hostrq_phys_addr);
 	return err;
 }
 
 static void
 qlcnic_fw_cmd_destroy_rx_ctx(struct qlcnic_adapter *adapter)
 {
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	if (qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			recv_ctx->context_id,
 			QLCNIC_DESTROY_CTX_RESET,
@@ -274,14 +366,14 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter)
 	*(tx_ring->hw_consumer) = 0;
 
 	rq_size = SIZEOF_HOSTRQ_TX(struct qlcnic_hostrq_tx_ctx);
-	rq_addr = pci_alloc_consistent(adapter->pdev,
-		rq_size, &rq_phys_addr);
+	rq_addr = dma_alloc_coherent(&adapter->pdev->dev, rq_size,
+			&rq_phys_addr, GFP_KERNEL);
 	if (!rq_addr)
 		return -ENOMEM;
 
 	rsp_size = SIZEOF_CARDRSP_TX(struct qlcnic_cardrsp_tx_ctx);
-	rsp_addr = pci_alloc_consistent(adapter->pdev,
-		rsp_size, &rsp_phys_addr);
+	rsp_addr = dma_alloc_coherent(&adapter->pdev->dev, rsp_size,
+			&rsp_phys_addr, GFP_KERNEL);
 	if (!rsp_addr) {
 		err = -ENOMEM;
 		goto out_free_rq;
@@ -313,7 +405,7 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter)
 
 	phys_addr = rq_phys_addr;
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			(u32)(phys_addr >> 32),
 			((u32)phys_addr & 0xffffffff),
@@ -322,7 +414,7 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter)
 
 	if (err == QLCNIC_RCODE_SUCCESS) {
 		temp = le32_to_cpu(prsp->cds_ring.host_producer_crb);
-		tx_ring->crb_cmd_producer = adapter->ahw.pci_base0 + temp;
+		tx_ring->crb_cmd_producer = adapter->ahw->pci_base0 + temp;
 
 		adapter->tx_context_id =
 			le16_to_cpu(prsp->context_id);
@@ -332,10 +424,11 @@ qlcnic_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter)
 		err = -EIO;
 	}
 
-	pci_free_consistent(adapter->pdev, rsp_size, rsp_addr, rsp_phys_addr);
+	dma_free_coherent(&adapter->pdev->dev, rsp_size, rsp_addr,
+		rsp_phys_addr);
 
 out_free_rq:
-	pci_free_consistent(adapter->pdev, rq_size, rq_addr, rq_phys_addr);
+	dma_free_coherent(&adapter->pdev->dev, rq_size, rq_addr, rq_phys_addr);
 
 	return err;
 }
@@ -344,7 +437,7 @@ static void
 qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter)
 {
 	if (qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			adapter->tx_context_id,
 			QLCNIC_DESTROY_CTX_RESET,
@@ -357,33 +450,15 @@ qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter)
 }
 
 int
-qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val)
-{
-
-	if (qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
-			adapter->fw_hal_version,
-			reg,
-			0,
-			0,
-			QLCNIC_CDRP_CMD_READ_PHY)) {
-
-		return -EIO;
-	}
-
-	return QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
-}
-
-int
-qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val)
+qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config)
 {
 	return qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
-			reg,
-			val,
+			config,
+			0,
 			0,
-			QLCNIC_CDRP_CMD_WRITE_PHY);
+			QLCNIC_CDRP_CMD_CONFIG_PORT);
 }
 
 int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
@@ -398,20 +473,19 @@ int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
 
 	struct pci_dev *pdev = adapter->pdev;
 
-	recv_ctx = &adapter->recv_ctx;
+	recv_ctx = adapter->recv_ctx;
 	tx_ring = adapter->tx_ring;
 
-	tx_ring->hw_consumer = (__le32 *)pci_alloc_consistent(pdev, sizeof(u32),
-						&tx_ring->hw_cons_phys_addr);
+	tx_ring->hw_consumer = (__le32 *) dma_alloc_coherent(&pdev->dev,
+		sizeof(u32), &tx_ring->hw_cons_phys_addr, GFP_KERNEL);
 	if (tx_ring->hw_consumer == NULL) {
 		dev_err(&pdev->dev, "failed to allocate tx consumer\n");
 		return -ENOMEM;
 	}
-	*(tx_ring->hw_consumer) = 0;
 
 	/* cmd desc ring */
-	addr = pci_alloc_consistent(pdev, TX_DESC_RINGSIZE(tx_ring),
-			&tx_ring->phys_addr);
+	addr = dma_alloc_coherent(&pdev->dev, TX_DESC_RINGSIZE(tx_ring),
+			&tx_ring->phys_addr, GFP_KERNEL);
 
 	if (addr == NULL) {
 		dev_err(&pdev->dev, "failed to allocate tx desc ring\n");
@@ -423,9 +497,9 @@ int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
-		addr = pci_alloc_consistent(adapter->pdev,
+		addr = dma_alloc_coherent(&adapter->pdev->dev,
 				RCV_DESC_RINGSIZE(rds_ring),
-				&rds_ring->phys_addr);
+				&rds_ring->phys_addr, GFP_KERNEL);
 		if (addr == NULL) {
 			dev_err(&pdev->dev,
 				"failed to allocate rds ring [%d]\n", ring);
@@ -439,9 +513,9 @@ int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
 
-		addr = pci_alloc_consistent(adapter->pdev,
+		addr = dma_alloc_coherent(&adapter->pdev->dev,
 				STATUS_DESC_RINGSIZE(sds_ring),
-				&sds_ring->phys_addr);
+				&sds_ring->phys_addr, GFP_KERNEL);
 		if (addr == NULL) {
 			dev_err(&pdev->dev,
 				"failed to allocate sds ring [%d]\n", ring);
@@ -501,11 +575,11 @@ void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter)
 	struct qlcnic_host_tx_ring *tx_ring;
 	int ring;
 
-	recv_ctx = &adapter->recv_ctx;
+	recv_ctx = adapter->recv_ctx;
 
 	tx_ring = adapter->tx_ring;
 	if (tx_ring->hw_consumer != NULL) {
-		pci_free_consistent(adapter->pdev,
+		dma_free_coherent(&adapter->pdev->dev,
 				sizeof(u32),
 				tx_ring->hw_consumer,
 				tx_ring->hw_cons_phys_addr);
@@ -513,7 +587,7 @@ void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter)
 	}
 
 	if (tx_ring->desc_head != NULL) {
-		pci_free_consistent(adapter->pdev,
+		dma_free_coherent(&adapter->pdev->dev,
 				TX_DESC_RINGSIZE(tx_ring),
 				tx_ring->desc_head, tx_ring->phys_addr);
 		tx_ring->desc_head = NULL;
@@ -523,7 +597,7 @@ void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter)
 		rds_ring = &recv_ctx->rds_rings[ring];
 
 		if (rds_ring->desc_head != NULL) {
-			pci_free_consistent(adapter->pdev,
+			dma_free_coherent(&adapter->pdev->dev,
 					RCV_DESC_RINGSIZE(rds_ring),
 					rds_ring->desc_head,
 					rds_ring->phys_addr);
@@ -535,7 +609,7 @@ void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter)
 		sds_ring = &recv_ctx->sds_rings[ring];
 
 		if (sds_ring->desc_head != NULL) {
-			pci_free_consistent(adapter->pdev,
+			dma_free_coherent(&adapter->pdev->dev,
 				STATUS_DESC_RINGSIZE(sds_ring),
 				sds_ring->desc_head,
 				sds_ring->phys_addr);
@@ -551,9 +625,9 @@ int qlcnic_get_mac_address(struct qlcnic_adapter *adapter, u8 *mac)
 	int err;
 	u32 arg1;
 
-	arg1 = adapter->ahw.pci_func | BIT_8;
+	arg1 = adapter->ahw->pci_func | BIT_8;
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			arg1,
 			0,
@@ -582,15 +656,15 @@ int qlcnic_get_nic_info(struct qlcnic_adapter *adapter,
 	void *nic_info_addr;
 	size_t	nic_size = sizeof(struct qlcnic_info);
 
-	nic_info_addr = pci_alloc_consistent(adapter->pdev,
-		nic_size, &nic_dma_t);
+	nic_info_addr = dma_alloc_coherent(&adapter->pdev->dev, nic_size,
+				&nic_dma_t, GFP_KERNEL);
 	if (!nic_info_addr)
 		return -ENOMEM;
 	memset(nic_info_addr, 0, nic_size);
 
 	nic_info = (struct qlcnic_info *) nic_info_addr;
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			MSD(nic_dma_t),
 			LSD(nic_dma_t),
@@ -623,7 +697,8 @@ int qlcnic_get_nic_info(struct qlcnic_adapter *adapter,
 		err = -EIO;
 	}
 
-	pci_free_consistent(adapter->pdev, nic_size, nic_info_addr, nic_dma_t);
+	dma_free_coherent(&adapter->pdev->dev, nic_size, nic_info_addr,
+		nic_dma_t);
 	return err;
 }
 
@@ -639,8 +714,8 @@ int qlcnic_set_nic_info(struct qlcnic_adapter *adapter, struct qlcnic_info *nic)
 	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
 		return err;
 
-	nic_info_addr = pci_alloc_consistent(adapter->pdev, nic_size,
-			&nic_dma_t);
+	nic_info_addr = dma_alloc_coherent(&adapter->pdev->dev, nic_size,
+			&nic_dma_t, GFP_KERNEL);
 	if (!nic_info_addr)
 		return -ENOMEM;
 
@@ -659,7 +734,7 @@ int qlcnic_set_nic_info(struct qlcnic_adapter *adapter, struct qlcnic_info *nic)
 	nic_info->max_tx_bw = cpu_to_le16(nic->max_tx_bw);
 
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			MSD(nic_dma_t),
 			LSD(nic_dma_t),
@@ -672,7 +747,8 @@ int qlcnic_set_nic_info(struct qlcnic_adapter *adapter, struct qlcnic_info *nic)
 		err = -EIO;
 	}
 
-	pci_free_consistent(adapter->pdev, nic_size, nic_info_addr, nic_dma_t);
+	dma_free_coherent(&adapter->pdev->dev, nic_size, nic_info_addr,
+		nic_dma_t);
 	return err;
 }
 
@@ -687,15 +763,15 @@ int qlcnic_get_pci_info(struct qlcnic_adapter *adapter,
 	size_t npar_size = sizeof(struct qlcnic_pci_info);
 	size_t pci_size = npar_size * QLCNIC_MAX_PCI_FUNC;
 
-	pci_info_addr = pci_alloc_consistent(adapter->pdev, pci_size,
-			&pci_info_dma_t);
+	pci_info_addr = dma_alloc_coherent(&adapter->pdev->dev, pci_size,
+			&pci_info_dma_t, GFP_KERNEL);
 	if (!pci_info_addr)
 		return -ENOMEM;
 	memset(pci_info_addr, 0, pci_size);
 
 	npar = (struct qlcnic_pci_info *) pci_info_addr;
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			MSD(pci_info_dma_t),
 			LSD(pci_info_dma_t),
@@ -721,7 +797,7 @@ int qlcnic_get_pci_info(struct qlcnic_adapter *adapter,
 		err = -EIO;
 	}
 
-	pci_free_consistent(adapter->pdev, pci_size, pci_info_addr,
+	dma_free_coherent(&adapter->pdev->dev, pci_size, pci_info_addr,
 		pci_info_dma_t);
 	return err;
 }
@@ -741,7 +817,7 @@ int qlcnic_config_port_mirroring(struct qlcnic_adapter *adapter, u8 id,
 	arg1 |= pci_func << 8;
 
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			arg1,
 			0,
@@ -775,14 +851,14 @@ int qlcnic_get_port_stats(struct qlcnic_adapter *adapter, const u8 func,
 		return -ENOMEM;
 
 	if (adapter->op_mode != QLCNIC_MGMT_FUNC &&
-	    func != adapter->ahw.pci_func) {
+	    func != adapter->ahw->pci_func) {
 		dev_err(&adapter->pdev->dev,
 			"Not privilege to query stats for func=%d", func);
 		return -EIO;
 	}
 
-	stats_addr = pci_alloc_consistent(adapter->pdev, stats_size,
-			&stats_dma_t);
+	stats_addr = dma_alloc_coherent(&adapter->pdev->dev, stats_size,
+			&stats_dma_t, GFP_KERNEL);
 	if (!stats_addr) {
 		dev_err(&adapter->pdev->dev, "Unable to allocate memory\n");
 		return -ENOMEM;
@@ -793,7 +869,7 @@ int qlcnic_get_port_stats(struct qlcnic_adapter *adapter, const u8 func,
 	arg1 |= rx_tx << 15 | stats_size << 16;
 
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			arg1,
 			MSD(stats_dma_t),
@@ -816,7 +892,7 @@ int qlcnic_get_port_stats(struct qlcnic_adapter *adapter, const u8 func,
 		esw_stats->numbytes = le64_to_cpu(stats->numbytes);
 	}
 
-	pci_free_consistent(adapter->pdev, stats_size, stats_addr,
+	dma_free_coherent(&adapter->pdev->dev, stats_size, stats_addr,
 		stats_dma_t);
 	return err;
 }
@@ -900,7 +976,7 @@ int qlcnic_clear_esw_stats(struct qlcnic_adapter *adapter, const u8 func_esw,
 	arg1 |= BIT_14 | rx_tx << 15;
 
 	return qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			arg1,
 			0,
@@ -921,7 +997,7 @@ __qlcnic_get_eswitch_port_config(struct qlcnic_adapter *adapter,
 	u8 pci_func;
 	pci_func = (*arg1 >> 8);
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			*arg1,
 			0,
@@ -999,7 +1075,7 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
 	}
 
 	err = qlcnic_issue_cmd(adapter,
-			adapter->ahw.pci_func,
+			adapter->ahw->pci_func,
 			adapter->fw_hal_version,
 			arg1,
 			arg2,
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index 45b2755d6cb..9efc690a289 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -150,10 +150,10 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
 	int check_sfp_module = 0;
-	u16 pcifn = adapter->ahw.pci_func;
+	u16 pcifn = adapter->ahw->pci_func;
 
 	/* read which mode */
-	if (adapter->ahw.port_type == QLCNIC_GBE) {
+	if (adapter->ahw->port_type == QLCNIC_GBE) {
 		ecmd->supported = (SUPPORTED_10baseT_Half |
 				   SUPPORTED_10baseT_Full |
 				   SUPPORTED_100baseT_Half |
@@ -166,11 +166,11 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 				     ADVERTISED_1000baseT_Half |
 				     ADVERTISED_1000baseT_Full);
 
-		ecmd->speed = adapter->link_speed;
+		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 		ecmd->duplex = adapter->link_duplex;
 		ecmd->autoneg = adapter->link_autoneg;
 
-	} else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+	} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
 		u32 val;
 
 		val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
@@ -183,15 +183,15 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		}
 
 		if (netif_running(dev) && adapter->has_link_events) {
-			ecmd->speed = adapter->link_speed;
+			ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 			ecmd->autoneg = adapter->link_autoneg;
 			ecmd->duplex = adapter->link_duplex;
 			goto skip;
 		}
 
 		val = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
-		ecmd->speed = P3P_LINK_SPEED_MHZ *
-			P3P_LINK_SPEED_VAL(pcifn, val);
+		ethtool_cmd_speed_set(ecmd, P3P_LINK_SPEED_MHZ *
+				      P3P_LINK_SPEED_VAL(pcifn, val));
 		ecmd->duplex = DUPLEX_FULL;
 		ecmd->autoneg = AUTONEG_DISABLE;
 	} else
@@ -201,7 +201,7 @@ skip:
 	ecmd->phy_address = adapter->physical_port;
 	ecmd->transceiver = XCVR_EXTERNAL;
 
-	switch (adapter->ahw.board_type) {
+	switch (adapter->ahw->board_type) {
 	case QLCNIC_BRDTYPE_P3P_REF_QG:
 	case QLCNIC_BRDTYPE_P3P_4_GB:
 	case QLCNIC_BRDTYPE_P3P_4_GB_MM:
@@ -238,7 +238,7 @@ skip:
 		ecmd->autoneg = AUTONEG_DISABLE;
 		break;
 	case QLCNIC_BRDTYPE_P3P_10G_TP:
-		if (adapter->ahw.port_type == QLCNIC_XGBE) {
+		if (adapter->ahw->port_type == QLCNIC_XGBE) {
 			ecmd->autoneg = AUTONEG_DISABLE;
 			ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
 			ecmd->advertising |=
@@ -256,7 +256,7 @@ skip:
 		break;
 	default:
 		dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
-			adapter->ahw.board_type);
+			adapter->ahw->board_type);
 		return -EIO;
 	}
 
@@ -284,50 +284,44 @@ skip:
 static int
 qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
+	u32 config = 0;
+	u32 ret = 0;
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
-	__u32 status;
+
+	if (adapter->ahw->port_type != QLCNIC_GBE)
+		return -EOPNOTSUPP;
 
 	/* read which mode */
-	if (adapter->ahw.port_type == QLCNIC_GBE) {
-		/* autonegotiation */
-		if (qlcnic_fw_cmd_set_phy(adapter,
-			       QLCNIC_NIU_GB_MII_MGMT_ADDR_AUTONEG,
-			       ecmd->autoneg) != 0)
-			return -EIO;
-		else
-			adapter->link_autoneg = ecmd->autoneg;
+	if (ecmd->duplex)
+		config |= 0x1;
 
-		if (qlcnic_fw_cmd_query_phy(adapter,
-			      QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-			      &status) != 0)
-			return -EIO;
+	if (ecmd->autoneg)
+		config |= 0x2;
 
-		switch (ecmd->speed) {
-		case SPEED_10:
-			qlcnic_set_phy_speed(status, 0);
-			break;
-		case SPEED_100:
-			qlcnic_set_phy_speed(status, 1);
-			break;
-		case SPEED_1000:
-			qlcnic_set_phy_speed(status, 2);
-			break;
-		}
+	switch (ethtool_cmd_speed(ecmd)) {
+	case SPEED_10:
+		config |= (0 << 8);
+		break;
+	case SPEED_100:
+		config |= (1 << 8);
+		break;
+	case SPEED_1000:
+		config |= (10 << 8);
+		break;
+	default:
+		return -EIO;
+	}
 
-		if (ecmd->duplex == DUPLEX_HALF)
-			qlcnic_clear_phy_duplex(status);
-		if (ecmd->duplex == DUPLEX_FULL)
-			qlcnic_set_phy_duplex(status);
-		if (qlcnic_fw_cmd_set_phy(adapter,
-			       QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-			       *((int *)&status)) != 0)
-			return -EIO;
-		else {
-			adapter->link_speed = ecmd->speed;
-			adapter->link_duplex = ecmd->duplex;
-		}
-	} else
+	ret = qlcnic_fw_cmd_set_port(adapter, config);
+
+	if (ret == QLCNIC_RCODE_NOT_SUPPORTED)
 		return -EOPNOTSUPP;
+	else if (ret)
+		return -EIO;
+
+	adapter->link_speed = ethtool_cmd_speed(ecmd);
+	adapter->link_duplex = ecmd->duplex;
+	adapter->link_autoneg = ecmd->autoneg;
 
 	if (!netif_running(dev))
 		return 0;
@@ -340,14 +334,14 @@ static void
 qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 	struct qlcnic_host_sds_ring *sds_ring;
 	u32 *regs_buff = p;
 	int ring, i = 0, j = 0;
 
 	memset(p, 0, qlcnic_get_regs_len(dev));
 	regs->version = (QLCNIC_ETHTOOL_REGS_VER << 24) |
-		(adapter->ahw.revision_id << 16) | (adapter->pdev)->device;
+		(adapter->ahw->revision_id << 16) | (adapter->pdev)->device;
 
 	regs_buff[0] = (0xcafe0000 | (QLCNIC_DEV_INFO_SIZE & 0xffff));
 	regs_buff[1] = QLCNIC_MGMT_API_VERSION;
@@ -382,7 +376,7 @@ static u32 qlcnic_test_link(struct net_device *dev)
 	u32 val;
 
 	val = QLCRD32(adapter, CRB_XG_STATE_P3P);
-	val = XG_LINK_STATE_P3P(adapter->ahw.pci_func, val);
+	val = XG_LINK_STATE_P3P(adapter->ahw->pci_func, val);
 	return (val == XG_LINK_UP_P3P) ? 0 : 1;
 }
 
@@ -474,6 +468,39 @@ qlcnic_set_ringparam(struct net_device *dev,
 	return qlcnic_reset_context(adapter);
 }
 
+static void qlcnic_get_channels(struct net_device *dev,
+		struct ethtool_channels *channel)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+
+	channel->max_rx = rounddown_pow_of_two(min_t(int,
+			adapter->max_rx_ques, num_online_cpus()));
+	channel->max_tx = adapter->max_tx_ques;
+
+	channel->rx_count = adapter->max_sds_rings;
+	channel->tx_count = adapter->max_tx_ques;
+}
+
+static int qlcnic_set_channels(struct net_device *dev,
+		struct ethtool_channels *channel)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	int err;
+
+	if (channel->other_count || channel->combined_count ||
+	    channel->tx_count != channel->max_tx)
+		return -EINVAL;
+
+	err = qlcnic_validate_max_rss(dev, channel->max_rx, channel->rx_count);
+	if (err)
+		return err;
+
+	err = qlcnic_set_max_rss(adapter, channel->rx_count);
+	netdev_info(dev, "allocated 0x%x sds rings\n",
+				 adapter->max_sds_rings);
+	return err;
+}
+
 static void
 qlcnic_get_pauseparam(struct net_device *netdev,
 			  struct ethtool_pauseparam *pause)
@@ -482,7 +509,7 @@ qlcnic_get_pauseparam(struct net_device *netdev,
 	int port = adapter->physical_port;
 	__u32 val;
 
-	if (adapter->ahw.port_type == QLCNIC_GBE) {
+	if (adapter->ahw->port_type == QLCNIC_GBE) {
 		if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
 			return;
 		/* get flow control settings */
@@ -504,7 +531,7 @@ qlcnic_get_pauseparam(struct net_device *netdev,
 			pause->tx_pause = !(qlcnic_gb_get_gb3_mask(val));
 			break;
 		}
-	} else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+	} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
 		if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS))
 			return;
 		pause->rx_pause = 1;
@@ -515,7 +542,7 @@ qlcnic_get_pauseparam(struct net_device *netdev,
 			pause->tx_pause = !(qlcnic_xg_get_xg1_mask(val));
 	} else {
 		dev_err(&netdev->dev, "Unknown board type: %x\n",
-					adapter->ahw.port_type);
+					adapter->ahw->port_type);
 	}
 }
 
@@ -528,7 +555,7 @@ qlcnic_set_pauseparam(struct net_device *netdev,
 	__u32 val;
 
 	/* read mode */
-	if (adapter->ahw.port_type == QLCNIC_GBE) {
+	if (adapter->ahw->port_type == QLCNIC_GBE) {
 		if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS))
 			return -EIO;
 		/* set flow control */
@@ -571,7 +598,7 @@ qlcnic_set_pauseparam(struct net_device *netdev,
 			break;
 		}
 		QLCWR32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, val);
-	} else if (adapter->ahw.port_type == QLCNIC_XGBE) {
+	} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
 		if (!pause->rx_pause || pause->autoneg)
 			return -EOPNOTSUPP;
 
@@ -593,7 +620,7 @@ qlcnic_set_pauseparam(struct net_device *netdev,
 		QLCWR32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, val);
 	} else {
 		dev_err(&netdev->dev, "Unknown board type: %x\n",
-				adapter->ahw.port_type);
+				adapter->ahw->port_type);
 	}
 	return 0;
 }
@@ -639,8 +666,8 @@ static int qlcnic_irq_test(struct net_device *netdev)
 		goto clear_it;
 
 	adapter->diag_cnt = 0;
-	ret = qlcnic_issue_cmd(adapter, adapter->ahw.pci_func,
-			adapter->fw_hal_version, adapter->portnum,
+	ret = qlcnic_issue_cmd(adapter, adapter->ahw->pci_func,
+			adapter->fw_hal_version, adapter->ahw->pci_func,
 			0, 0, 0x00000011);
 	if (ret)
 		goto done;
@@ -749,14 +776,14 @@ qlcnic_get_ethtool_stats(struct net_device *dev,
 		return;
 
 	memset(&port_stats, 0, sizeof(struct qlcnic_esw_statistics));
-	ret = qlcnic_get_port_stats(adapter, adapter->ahw.pci_func,
+	ret = qlcnic_get_port_stats(adapter, adapter->ahw->pci_func,
 			QLCNIC_QUERY_RX_COUNTER, &port_stats.rx);
 	if (ret)
 		return;
 
 	qlcnic_fill_device_stats(&index, data, &port_stats.rx);
 
-	ret = qlcnic_get_port_stats(adapter, adapter->ahw.pci_func,
+	ret = qlcnic_get_port_stats(adapter, adapter->ahw->pci_func,
 			QLCNIC_QUERY_TX_COUNTER, &port_stats.tx);
 	if (ret)
 		return;
@@ -764,115 +791,49 @@ qlcnic_get_ethtool_stats(struct net_device *dev,
 	qlcnic_fill_device_stats(&index, data, &port_stats.tx);
 }
 
-static int qlcnic_set_tx_csum(struct net_device *dev, u32 data)
-{
-	struct qlcnic_adapter *adapter = netdev_priv(dev);
-
-	if ((adapter->flags & QLCNIC_ESWITCH_ENABLED))
-		return -EOPNOTSUPP;
-	if (data)
-		dev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-	else
-		dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-
-	return 0;
-
-}
-static u32 qlcnic_get_tx_csum(struct net_device *dev)
-{
-	return dev->features & NETIF_F_IP_CSUM;
-}
-
-static u32 qlcnic_get_rx_csum(struct net_device *dev)
-{
-	struct qlcnic_adapter *adapter = netdev_priv(dev);
-	return adapter->rx_csum;
-}
-
-static int qlcnic_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct qlcnic_adapter *adapter = netdev_priv(dev);
-
-	if ((adapter->flags & QLCNIC_ESWITCH_ENABLED))
-		return -EOPNOTSUPP;
-	if (!!data) {
-		adapter->rx_csum = !!data;
-		return 0;
-	}
-
-	if (dev->features & NETIF_F_LRO) {
-		if (qlcnic_config_hw_lro(adapter, QLCNIC_LRO_DISABLED))
-			return -EIO;
-
-		dev->features &= ~NETIF_F_LRO;
-		qlcnic_send_lro_cleanup(adapter);
-		dev_info(&adapter->pdev->dev,
-					"disabling LRO as rx_csum is off\n");
-	}
-	adapter->rx_csum = !!data;
-	return 0;
-}
-
-static u32 qlcnic_get_tso(struct net_device *dev)
-{
-	return (dev->features & (NETIF_F_TSO | NETIF_F_TSO6)) != 0;
-}
-
-static int qlcnic_set_tso(struct net_device *dev, u32 data)
-{
-	struct qlcnic_adapter *adapter = netdev_priv(dev);
-	if (!(adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO))
-		return -EOPNOTSUPP;
-	if (data)
-		dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
-	else
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
-	return 0;
-}
-
-static int qlcnic_blink_led(struct net_device *dev, u32 val)
+static int qlcnic_set_led(struct net_device *dev,
+			  enum ethtool_phys_id_state state)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
 	int max_sds_rings = adapter->max_sds_rings;
-	int dev_down = 0;
-	int ret;
-
-	if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
-		dev_down = 1;
-		if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
-			return -EIO;
 
-		ret = qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST);
-		if (ret) {
-			clear_bit(__QLCNIC_RESETTING, &adapter->state);
-			return ret;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
+			if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+				return -EIO;
+
+			if (qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST)) {
+				clear_bit(__QLCNIC_RESETTING, &adapter->state);
+				return -EIO;
+			}
+			set_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state);
 		}
-	}
 
-	ret = adapter->nic_ops->config_led(adapter, 1, 0xf);
-	if (ret) {
+		if (adapter->nic_ops->config_led(adapter, 1, 0xf) == 0)
+			return 0;
+
 		dev_err(&adapter->pdev->dev,
 			"Failed to set LED blink state.\n");
-		goto done;
-	}
+		break;
 
-	msleep_interruptible(val * 1000);
+	case ETHTOOL_ID_INACTIVE:
+		if (adapter->nic_ops->config_led(adapter, 0, 0xf))
+			dev_err(&adapter->pdev->dev,
+				"Failed to reset LED blink state.\n");
 
-	ret = adapter->nic_ops->config_led(adapter, 0, 0xf);
-	if (ret) {
-		dev_err(&adapter->pdev->dev,
-			"Failed to reset LED blink state.\n");
-		goto done;
+		break;
+
+	default:
+		return -EINVAL;
 	}
 
-done:
-	if (dev_down) {
+	if (test_and_clear_bit(__QLCNIC_DIAG_RES_ALLOC, &adapter->state)) {
 		qlcnic_diag_free_res(dev, max_sds_rings);
 		clear_bit(__QLCNIC_RESETTING, &adapter->state);
 	}
-	return ret;
 
+	return -EIO;
 }
 
 static void
@@ -936,8 +897,8 @@ static int qlcnic_set_intr_coalesce(struct net_device *netdev,
 	*/
 	if (ethcoal->rx_coalesce_usecs > 0xffff ||
 		ethcoal->rx_max_coalesced_frames > 0xffff ||
-		ethcoal->tx_coalesce_usecs > 0xffff ||
-		ethcoal->tx_max_coalesced_frames > 0xffff ||
+		ethcoal->tx_coalesce_usecs ||
+		ethcoal->tx_max_coalesced_frames ||
 		ethcoal->rx_coalesce_usecs_irq ||
 		ethcoal->rx_max_coalesced_frames_irq ||
 		ethcoal->tx_coalesce_usecs_irq ||
@@ -959,21 +920,17 @@ static int qlcnic_set_intr_coalesce(struct net_device *netdev,
 
 	if (!ethcoal->rx_coalesce_usecs ||
 		!ethcoal->rx_max_coalesced_frames) {
-		adapter->coal.flags = QLCNIC_INTR_DEFAULT;
-		adapter->coal.normal.data.rx_time_us =
+		adapter->ahw->coal.flag = QLCNIC_INTR_DEFAULT;
+		adapter->ahw->coal.rx_time_us =
 			QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US;
-		adapter->coal.normal.data.rx_packets =
+		adapter->ahw->coal.rx_packets =
 			QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS;
 	} else {
-		adapter->coal.flags = 0;
-		adapter->coal.normal.data.rx_time_us =
-		ethcoal->rx_coalesce_usecs;
-		adapter->coal.normal.data.rx_packets =
-		ethcoal->rx_max_coalesced_frames;
+		adapter->ahw->coal.flag = 0;
+		adapter->ahw->coal.rx_time_us = ethcoal->rx_coalesce_usecs;
+		adapter->ahw->coal.rx_packets =
+			ethcoal->rx_max_coalesced_frames;
 	}
-	adapter->coal.normal.data.tx_time_us = ethcoal->tx_coalesce_usecs;
-	adapter->coal.normal.data.tx_packets =
-	ethcoal->tx_max_coalesced_frames;
 
 	qlcnic_config_intr_coalesce(adapter);
 
@@ -988,66 +945,102 @@ static int qlcnic_get_intr_coalesce(struct net_device *netdev,
 	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
 		return -EINVAL;
 
-	ethcoal->rx_coalesce_usecs = adapter->coal.normal.data.rx_time_us;
-	ethcoal->tx_coalesce_usecs = adapter->coal.normal.data.tx_time_us;
-	ethcoal->rx_max_coalesced_frames =
-		adapter->coal.normal.data.rx_packets;
-	ethcoal->tx_max_coalesced_frames =
-		adapter->coal.normal.data.tx_packets;
+	ethcoal->rx_coalesce_usecs = adapter->ahw->coal.rx_time_us;
+	ethcoal->rx_max_coalesced_frames = adapter->ahw->coal.rx_packets;
 
 	return 0;
 }
 
-static int qlcnic_set_flags(struct net_device *netdev, u32 data)
+static u32 qlcnic_get_msglevel(struct net_device *netdev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
-	int hw_lro;
-
-	if (ethtool_invalid_flags(netdev, data, ETH_FLAG_LRO))
-		return -EINVAL;
-
-	if (!(adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO))
-		return -EINVAL;
-
-	if (!adapter->rx_csum) {
-		dev_info(&adapter->pdev->dev, "rx csum is off, "
-			"cannot toggle lro\n");
-		return -EINVAL;
-	}
 
-	if ((data & ETH_FLAG_LRO) && (netdev->features & NETIF_F_LRO))
-		return 0;
-
-	if (data & ETH_FLAG_LRO) {
-		hw_lro = QLCNIC_LRO_ENABLED;
-		netdev->features |= NETIF_F_LRO;
-	} else {
-		hw_lro = 0;
-		netdev->features &= ~NETIF_F_LRO;
-	}
+	return adapter->msg_enable;
+}
 
-	if (qlcnic_config_hw_lro(adapter, hw_lro))
-		return -EIO;
+static void qlcnic_set_msglevel(struct net_device *netdev, u32 msglvl)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
-	if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter))
-		return -EIO;
+	adapter->msg_enable = msglvl;
+}
 
+static int
+qlcnic_get_dump_flag(struct net_device *netdev, struct ethtool_dump *dump)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
 
+	dump->len = fw_dump->tmpl_hdr->size + fw_dump->size;
+	dump->flag = fw_dump->tmpl_hdr->drv_cap_mask;
+	dump->version = adapter->fw_version;
 	return 0;
 }
 
-static u32 qlcnic_get_msglevel(struct net_device *netdev)
+static int
+qlcnic_get_dump_data(struct net_device *netdev, struct ethtool_dump *dump,
+			void *buffer)
 {
+	int i, copy_sz;
+	u32 *hdr_ptr, *data;
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
 
-	return adapter->msg_enable;
+	if (qlcnic_api_lock(adapter))
+		return -EIO;
+	if (!fw_dump->clr) {
+		netdev_info(netdev, "Dump not available\n");
+		qlcnic_api_unlock(adapter);
+		return -EINVAL;
+	}
+	/* Copy template header first */
+	copy_sz = fw_dump->tmpl_hdr->size;
+	hdr_ptr = (u32 *) fw_dump->tmpl_hdr;
+	data = (u32 *) buffer;
+	for (i = 0; i < copy_sz/sizeof(u32); i++)
+		*data++ = cpu_to_le32(*hdr_ptr++);
+
+	/* Copy captured dump data */
+	memcpy(buffer + copy_sz, fw_dump->data, fw_dump->size);
+	dump->len = copy_sz + fw_dump->size;
+	dump->flag = fw_dump->tmpl_hdr->drv_cap_mask;
+
+	/* Free dump area once data has been captured */
+	vfree(fw_dump->data);
+	fw_dump->data = NULL;
+	fw_dump->clr = 0;
+	qlcnic_api_unlock(adapter);
+
+	return 0;
 }
 
-static void qlcnic_set_msglevel(struct net_device *netdev, u32 msglvl)
+static int
+qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 {
+	int ret = 0;
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
 
-	adapter->msg_enable = msglvl;
+	if (val->flag == QLCNIC_FORCE_FW_DUMP_KEY) {
+		netdev_info(netdev, "Forcing a FW dump\n");
+		qlcnic_dev_request_reset(adapter);
+	} else {
+		if (val->flag > QLCNIC_DUMP_MASK_MAX ||
+			val->flag < QLCNIC_DUMP_MASK_MIN) {
+				netdev_info(netdev,
+				"Invalid dump level: 0x%x\n", val->flag);
+				ret = -EINVAL;
+				goto out;
+		}
+		if (qlcnic_api_lock(adapter))
+			return -EIO;
+		fw_dump->tmpl_hdr->drv_cap_mask = val->flag & 0xff;
+		qlcnic_api_unlock(adapter);
+		netdev_info(netdev, "Driver mask changed to: 0x%x\n",
+			fw_dump->tmpl_hdr->drv_cap_mask);
+	}
+out:
+	return ret;
 }
 
 const struct ethtool_ops qlcnic_ethtool_ops = {
@@ -1061,26 +1054,22 @@ const struct ethtool_ops qlcnic_ethtool_ops = {
 	.get_eeprom = qlcnic_get_eeprom,
 	.get_ringparam = qlcnic_get_ringparam,
 	.set_ringparam = qlcnic_set_ringparam,
+	.get_channels = qlcnic_get_channels,
+	.set_channels = qlcnic_set_channels,
 	.get_pauseparam = qlcnic_get_pauseparam,
 	.set_pauseparam = qlcnic_set_pauseparam,
-	.get_tx_csum = qlcnic_get_tx_csum,
-	.set_tx_csum = qlcnic_set_tx_csum,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = qlcnic_get_tso,
-	.set_tso = qlcnic_set_tso,
 	.get_wol = qlcnic_get_wol,
 	.set_wol = qlcnic_set_wol,
 	.self_test = qlcnic_diag_test,
 	.get_strings = qlcnic_get_strings,
 	.get_ethtool_stats = qlcnic_get_ethtool_stats,
 	.get_sset_count = qlcnic_get_sset_count,
-	.get_rx_csum = qlcnic_get_rx_csum,
-	.set_rx_csum = qlcnic_set_rx_csum,
 	.get_coalesce = qlcnic_get_intr_coalesce,
 	.set_coalesce = qlcnic_set_intr_coalesce,
-	.get_flags = ethtool_op_get_flags,
-	.set_flags = qlcnic_set_flags,
-	.phys_id = qlcnic_blink_led,
+	.set_phys_id = qlcnic_set_led,
 	.set_msglevel = qlcnic_set_msglevel,
 	.get_msglevel = qlcnic_get_msglevel,
+	.get_dump_flag = qlcnic_get_dump_flag,
+	.get_dump_data = qlcnic_get_dump_data,
+	.set_dump = qlcnic_set_dump,
 };
diff --git a/drivers/net/qlcnic/qlcnic_hdr.h b/drivers/net/qlcnic/qlcnic_hdr.h
index 726ef555b6b..d14506f764e 100644
--- a/drivers/net/qlcnic/qlcnic_hdr.h
+++ b/drivers/net/qlcnic/qlcnic_hdr.h
@@ -492,10 +492,10 @@ enum {
 
 #define TEST_AGT_CTRL	(0x00)
 
-#define TA_CTL_START	1
-#define TA_CTL_ENABLE	2
-#define TA_CTL_WRITE	4
-#define TA_CTL_BUSY	8
+#define TA_CTL_START	BIT_0
+#define TA_CTL_ENABLE	BIT_1
+#define TA_CTL_WRITE	BIT_2
+#define TA_CTL_BUSY	BIT_3
 
 /*
  *   Register offsets for MN
@@ -765,6 +765,38 @@ struct qlcnic_legacy_intr_set {
 #define QLCNIC_MAX_PCI_FUNC	8
 #define QLCNIC_MAX_VLAN_FILTERS	64
 
+/* FW dump defines */
+#define MIU_TEST_CTR		0x41000090
+#define MIU_TEST_ADDR_LO	0x41000094
+#define MIU_TEST_ADDR_HI	0x41000098
+#define FLASH_ROM_WINDOW	0x42110030
+#define FLASH_ROM_DATA		0x42150000
+
+static const u32 MIU_TEST_READ_DATA[] = {
+	0x410000A8, 0x410000AC, 0x410000B8, 0x410000BC, };
+
+#define QLCNIC_FW_DUMP_REG1	0x00130060
+#define QLCNIC_FW_DUMP_REG2	0x001e0000
+#define QLCNIC_FLASH_SEM2_LK	0x0013C010
+#define QLCNIC_FLASH_SEM2_ULK	0x0013C014
+#define QLCNIC_FLASH_LOCK_ID	0x001B2100
+
+#define QLCNIC_RD_DUMP_REG(addr, bar0, data) do {			\
+	writel((addr & 0xFFFF0000), (void *) (bar0 +			\
+		QLCNIC_FW_DUMP_REG1));					\
+	readl((void *) (bar0 + QLCNIC_FW_DUMP_REG1));			\
+	*data = readl((void *) (bar0 + QLCNIC_FW_DUMP_REG2 +		\
+		LSW(addr)));						\
+} while (0)
+
+#define QLCNIC_WR_DUMP_REG(addr, bar0, data) do {			\
+	writel((addr & 0xFFFF0000), (void *) (bar0 +			\
+		QLCNIC_FW_DUMP_REG1));					\
+	readl((void *) (bar0 + QLCNIC_FW_DUMP_REG1));			\
+	writel(data, (void *) (bar0 + QLCNIC_FW_DUMP_REG2 + LSW(addr)));\
+	readl((void *) (bar0 + QLCNIC_FW_DUMP_REG2 + LSW(addr)));	\
+} while (0)
+
 /* PCI function operational mode */
 enum {
 	QLCNIC_MGMT_FUNC	= 0,
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 616940f0a8d..e9656616f2a 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -9,6 +9,7 @@
 
 #include <linux/slab.h>
 #include <net/ip.h>
+#include <linux/bitops.h>
 
 #define MASK(n) ((1ULL<<(n))-1)
 #define OCM_WIN_P3P(addr) (addr & 0xffc0000)
@@ -457,7 +458,7 @@ int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode)
 
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
 
-	word = QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE |
+	word = QLCNIC_H2C_OPCODE_SET_MAC_RECEIVE_MODE |
 			((u64)adapter->portnum << 16);
 	req.req_hdr = cpu_to_le64(word);
 
@@ -532,33 +533,31 @@ void qlcnic_delete_lb_filters(struct qlcnic_adapter *adapter)
 	}
 }
 
-#define	QLCNIC_CONFIG_INTR_COALESCE	3
-
 /*
  * Send the interrupt coalescing parameter set by ethtool to the card.
  */
 int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_nic_req req;
-	u64 word[6];
-	int rv, i;
+	int rv;
 
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
 
-	word[0] = QLCNIC_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
-	req.req_hdr = cpu_to_le64(word[0]);
-
-	memcpy(&word[0], &adapter->coal, sizeof(adapter->coal));
-	for (i = 0; i < 6; i++)
-		req.words[i] = cpu_to_le64(word[i]);
+	req.req_hdr = cpu_to_le64(QLCNIC_CONFIG_INTR_COALESCE |
+		((u64) adapter->portnum << 16));
 
+	req.words[0] = cpu_to_le64(((u64) adapter->ahw->coal.flag) << 32);
+	req.words[2] = cpu_to_le64(adapter->ahw->coal.rx_packets |
+			((u64) adapter->ahw->coal.rx_time_us) << 16);
+	req.words[5] = cpu_to_le64(adapter->ahw->coal.timer_out |
+			((u64) adapter->ahw->coal.type) << 32 |
+			((u64) adapter->ahw->coal.sts_ring_mask) << 40);
 	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0)
 		dev_err(&adapter->netdev->dev,
 			"Could not send interrupt coalescing parameters\n");
-
 	return rv;
 }
 
@@ -568,6 +567,9 @@ int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
 	u64 word;
 	int rv;
 
+	if (!test_bit(__QLCNIC_FW_ATTACHED, &adapter->state))
+		return 0;
+
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
@@ -713,6 +715,9 @@ int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter)
 	u64 word;
 	int rv;
 
+	if (!test_bit(__QLCNIC_FW_ATTACHED, &adapter->state))
+		return 0;
+
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
 
@@ -754,6 +759,43 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
 	return rc;
 }
 
+
+u32 qlcnic_fix_features(struct net_device *netdev, u32 features)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+	if ((adapter->flags & QLCNIC_ESWITCH_ENABLED)) {
+		u32 changed = features ^ netdev->features;
+		features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM);
+	}
+
+	if (!(features & NETIF_F_RXCSUM))
+		features &= ~NETIF_F_LRO;
+
+	return features;
+}
+
+
+int qlcnic_set_features(struct net_device *netdev, u32 features)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	u32 changed = netdev->features ^ features;
+	int hw_lro = (features & NETIF_F_LRO) ? QLCNIC_LRO_ENABLED : 0;
+
+	if (!(changed & NETIF_F_LRO))
+		return 0;
+
+	netdev->features = features ^ NETIF_F_LRO;
+
+	if (qlcnic_config_hw_lro(adapter, hw_lro))
+		return -EIO;
+
+	if ((hw_lro == 0) && qlcnic_send_lro_cleanup(adapter))
+		return -EIO;
+
+	return 0;
+}
+
 /*
  * Changes the CRB window to the specified window.
  */
@@ -780,7 +822,7 @@ qlcnic_pci_get_crb_addr_2M(struct qlcnic_adapter *adapter,
 	m = &crb_128M_2M_map[CRB_BLK(off)].sub_block[CRB_SUBBLK(off)];
 
 	if (m->valid && (m->start_128M <= off) && (m->end_128M > off)) {
-		*addr = adapter->ahw.pci_base0 + m->start_2M +
+		*addr = adapter->ahw->pci_base0 + m->start_2M +
 			(off - m->start_128M);
 		return 0;
 	}
@@ -788,7 +830,7 @@ qlcnic_pci_get_crb_addr_2M(struct qlcnic_adapter *adapter,
 	/*
 	 * Not in direct map, use crb window
 	 */
-	*addr = adapter->ahw.pci_base0 + CRB_INDIRECT_2M + (off & MASK(16));
+	*addr = adapter->ahw->pci_base0 + CRB_INDIRECT_2M + (off & MASK(16));
 	return 1;
 }
 
@@ -801,7 +843,7 @@ static int
 qlcnic_pci_set_crbwindow_2M(struct qlcnic_adapter *adapter, ulong off)
 {
 	u32 window;
-	void __iomem *addr = adapter->ahw.pci_base0 + CRB_WINDOW_2M;
+	void __iomem *addr = adapter->ahw->pci_base0 + CRB_WINDOW_2M;
 
 	off -= QLCNIC_PCI_CRBSPACE;
 
@@ -838,13 +880,13 @@ qlcnic_hw_write_wx_2M(struct qlcnic_adapter *adapter, ulong off, u32 data)
 
 	if (rv > 0) {
 		/* indirect access */
-		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		write_lock_irqsave(&adapter->ahw->crb_lock, flags);
 		crb_win_lock(adapter);
 		rv = qlcnic_pci_set_crbwindow_2M(adapter, off);
 		if (!rv)
 			writel(data, addr);
 		crb_win_unlock(adapter);
-		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		write_unlock_irqrestore(&adapter->ahw->crb_lock, flags);
 		return rv;
 	}
 
@@ -869,12 +911,12 @@ qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off)
 
 	if (rv > 0) {
 		/* indirect access */
-		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		write_lock_irqsave(&adapter->ahw->crb_lock, flags);
 		crb_win_lock(adapter);
 		if (!qlcnic_pci_set_crbwindow_2M(adapter, off))
 			data = readl(addr);
 		crb_win_unlock(adapter);
-		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		write_unlock_irqrestore(&adapter->ahw->crb_lock, flags);
 		return data;
 	}
 
@@ -904,9 +946,9 @@ qlcnic_pci_set_window_2M(struct qlcnic_adapter *adapter,
 
 	window = OCM_WIN_P3P(addr);
 
-	writel(window, adapter->ahw.ocm_win_crb);
+	writel(window, adapter->ahw->ocm_win_crb);
 	/* read back to flush */
-	readl(adapter->ahw.ocm_win_crb);
+	readl(adapter->ahw->ocm_win_crb);
 
 	*start = QLCNIC_PCI_OCM0_2M + GET_MEM_OFFS_2M(addr);
 	return 0;
@@ -920,13 +962,13 @@ qlcnic_pci_mem_access_direct(struct qlcnic_adapter *adapter, u64 off,
 	int ret;
 	u32 start;
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 
 	ret = qlcnic_pci_set_window_2M(adapter, off, &start);
 	if (ret != 0)
 		goto unlock;
 
-	addr = adapter->ahw.pci_base0 + start;
+	addr = adapter->ahw->pci_base0 + start;
 
 	if (op == 0)	/* read */
 		*data = readq(addr);
@@ -934,7 +976,7 @@ qlcnic_pci_mem_access_direct(struct qlcnic_adapter *adapter, u64 off,
 		writeq(*data, addr);
 
 unlock:
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 
 	return ret;
 }
@@ -942,23 +984,23 @@ unlock:
 void
 qlcnic_pci_camqm_read_2M(struct qlcnic_adapter *adapter, u64 off, u64 *data)
 {
-	void __iomem *addr = adapter->ahw.pci_base0 +
+	void __iomem *addr = adapter->ahw->pci_base0 +
 		QLCNIC_PCI_CAMQM_2M_BASE + (off - QLCNIC_PCI_CAMQM);
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 	*data = readq(addr);
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 }
 
 void
 qlcnic_pci_camqm_write_2M(struct qlcnic_adapter *adapter, u64 off, u64 data)
 {
-	void __iomem *addr = adapter->ahw.pci_base0 +
+	void __iomem *addr = adapter->ahw->pci_base0 +
 		QLCNIC_PCI_CAMQM_2M_BASE + (off - QLCNIC_PCI_CAMQM);
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 	writeq(data, addr);
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 }
 
 #define MAX_CTL_CHECK   1000
@@ -997,7 +1039,7 @@ qlcnic_pci_mem_write_2M(struct qlcnic_adapter *adapter,
 correct:
 	off8 = off & ~0xf;
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 
 	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
 	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
@@ -1049,7 +1091,7 @@ correct:
 		ret = 0;
 
 done:
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 
 	return ret;
 }
@@ -1091,7 +1133,7 @@ qlcnic_pci_mem_read_2M(struct qlcnic_adapter *adapter,
 correct:
 	off8 = off & ~0xf;
 
-	mutex_lock(&adapter->ahw.mem_lock);
+	mutex_lock(&adapter->ahw->mem_lock);
 
 	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
 	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
@@ -1121,7 +1163,7 @@ correct:
 		ret = 0;
 	}
 
-	mutex_unlock(&adapter->ahw.mem_lock);
+	mutex_unlock(&adapter->ahw->mem_lock);
 
 	return ret;
 }
@@ -1145,7 +1187,7 @@ int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
 	if (qlcnic_rom_fast_read(adapter, offset, &board_type))
 		return -EIO;
 
-	adapter->ahw.board_type = board_type;
+	adapter->ahw->board_type = board_type;
 
 	if (board_type == QLCNIC_BRDTYPE_P3P_4_GB_MM) {
 		u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I);
@@ -1164,20 +1206,20 @@ int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
 	case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
 	case QLCNIC_BRDTYPE_P3P_10G_XFP:
 	case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
-		adapter->ahw.port_type = QLCNIC_XGBE;
+		adapter->ahw->port_type = QLCNIC_XGBE;
 		break;
 	case QLCNIC_BRDTYPE_P3P_REF_QG:
 	case QLCNIC_BRDTYPE_P3P_4_GB:
 	case QLCNIC_BRDTYPE_P3P_4_GB_MM:
-		adapter->ahw.port_type = QLCNIC_GBE;
+		adapter->ahw->port_type = QLCNIC_GBE;
 		break;
 	case QLCNIC_BRDTYPE_P3P_10G_TP:
-		adapter->ahw.port_type = (adapter->portnum < 2) ?
+		adapter->ahw->port_type = (adapter->portnum < 2) ?
 			QLCNIC_XGBE : QLCNIC_GBE;
 		break;
 	default:
 		dev_err(&pdev->dev, "unknown board type %x\n", board_type);
-		adapter->ahw.port_type = QLCNIC_XGBE;
+		adapter->ahw->port_type = QLCNIC_XGBE;
 		break;
 	}
 
@@ -1220,3 +1262,461 @@ int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate)
 
 	return rv;
 }
+
+/* FW dump related functions */
+static u32
+qlcnic_dump_crb(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+		u32 *buffer)
+{
+	int i;
+	u32 addr, data;
+	struct __crb *crb = &entry->region.crb;
+	void __iomem *base = adapter->ahw->pci_base0;
+
+	addr = crb->addr;
+
+	for (i = 0; i < crb->no_ops; i++) {
+		QLCNIC_RD_DUMP_REG(addr, base, &data);
+		*buffer++ = cpu_to_le32(addr);
+		*buffer++ = cpu_to_le32(data);
+		addr += crb->stride;
+	}
+	return crb->no_ops * 2 * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_ctrl(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	int i, k, timeout = 0;
+	void __iomem *base = adapter->ahw->pci_base0;
+	u32 addr, data;
+	u8 opcode, no_ops;
+	struct __ctrl *ctr = &entry->region.ctrl;
+	struct qlcnic_dump_template_hdr *t_hdr = adapter->ahw->fw_dump.tmpl_hdr;
+
+	addr = ctr->addr;
+	no_ops = ctr->no_ops;
+
+	for (i = 0; i < no_ops; i++) {
+		k = 0;
+		opcode = 0;
+		for (k = 0; k < 8; k++) {
+			if (!(ctr->opcode & (1 << k)))
+				continue;
+			switch (1 << k) {
+			case QLCNIC_DUMP_WCRB:
+				QLCNIC_WR_DUMP_REG(addr, base, ctr->val1);
+				break;
+			case QLCNIC_DUMP_RWCRB:
+				QLCNIC_RD_DUMP_REG(addr, base, &data);
+				QLCNIC_WR_DUMP_REG(addr, base, data);
+				break;
+			case QLCNIC_DUMP_ANDCRB:
+				QLCNIC_RD_DUMP_REG(addr, base, &data);
+				QLCNIC_WR_DUMP_REG(addr, base,
+					(data & ctr->val2));
+				break;
+			case QLCNIC_DUMP_ORCRB:
+				QLCNIC_RD_DUMP_REG(addr, base, &data);
+				QLCNIC_WR_DUMP_REG(addr, base,
+					(data | ctr->val3));
+				break;
+			case QLCNIC_DUMP_POLLCRB:
+				while (timeout <= ctr->timeout) {
+					QLCNIC_RD_DUMP_REG(addr, base, &data);
+					if ((data & ctr->val2) == ctr->val1)
+						break;
+					msleep(1);
+					timeout++;
+				}
+				if (timeout > ctr->timeout) {
+					dev_info(&adapter->pdev->dev,
+					"Timed out, aborting poll CRB\n");
+					return -EINVAL;
+				}
+				break;
+			case QLCNIC_DUMP_RD_SAVE:
+				if (ctr->index_a)
+					addr = t_hdr->saved_state[ctr->index_a];
+				QLCNIC_RD_DUMP_REG(addr, base, &data);
+				t_hdr->saved_state[ctr->index_v] = data;
+				break;
+			case QLCNIC_DUMP_WRT_SAVED:
+				if (ctr->index_v)
+					data = t_hdr->saved_state[ctr->index_v];
+				else
+					data = ctr->val1;
+				if (ctr->index_a)
+					addr = t_hdr->saved_state[ctr->index_a];
+				QLCNIC_WR_DUMP_REG(addr, base, data);
+				break;
+			case QLCNIC_DUMP_MOD_SAVE_ST:
+				data = t_hdr->saved_state[ctr->index_v];
+				data <<= ctr->shl_val;
+				data >>= ctr->shr_val;
+				if (ctr->val2)
+					data &= ctr->val2;
+				data |= ctr->val3;
+				data += ctr->val1;
+				t_hdr->saved_state[ctr->index_v] = data;
+				break;
+			default:
+				dev_info(&adapter->pdev->dev,
+					"Unknown opcode\n");
+				break;
+			}
+		}
+		addr += ctr->stride;
+	}
+	return 0;
+}
+
+static u32
+qlcnic_dump_mux(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+	u32 *buffer)
+{
+	int loop;
+	u32 val, data = 0;
+	struct __mux *mux = &entry->region.mux;
+	void __iomem *base = adapter->ahw->pci_base0;
+
+	val = mux->val;
+	for (loop = 0; loop < mux->no_ops; loop++) {
+		QLCNIC_WR_DUMP_REG(mux->addr, base, val);
+		QLCNIC_RD_DUMP_REG(mux->read_addr, base, &data);
+		*buffer++ = cpu_to_le32(val);
+		*buffer++ = cpu_to_le32(data);
+		val += mux->val_stride;
+	}
+	return 2 * mux->no_ops * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_que(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+	u32 *buffer)
+{
+	int i, loop;
+	u32 cnt, addr, data, que_id = 0;
+	void __iomem *base = adapter->ahw->pci_base0;
+	struct __queue *que = &entry->region.que;
+
+	addr = que->read_addr;
+	cnt = que->read_addr_cnt;
+
+	for (loop = 0; loop < que->no_ops; loop++) {
+		QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id);
+		for (i = 0; i < cnt; i++) {
+			QLCNIC_RD_DUMP_REG(addr, base, &data);
+			*buffer++ = cpu_to_le32(data);
+			addr += que->read_addr_stride;
+		}
+		que_id += que->stride;
+	}
+	return que->no_ops * cnt * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_ocm(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+	u32 *buffer)
+{
+	int i;
+	u32 data;
+	void __iomem *addr;
+	struct __ocm *ocm = &entry->region.ocm;
+
+	addr = adapter->ahw->pci_base0 + ocm->read_addr;
+	for (i = 0; i < ocm->no_ops; i++) {
+		data = readl(addr);
+		*buffer++ = cpu_to_le32(data);
+		addr += ocm->read_addr_stride;
+	}
+	return ocm->no_ops * sizeof(u32);
+}
+
+static u32
+qlcnic_read_rom(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry,
+	u32 *buffer)
+{
+	int i, count = 0;
+	u32 fl_addr, size, val, lck_val, addr;
+	struct __mem *rom = &entry->region.mem;
+	void __iomem *base = adapter->ahw->pci_base0;
+
+	fl_addr = rom->addr;
+	size = rom->size/4;
+lock_try:
+	lck_val = readl(base + QLCNIC_FLASH_SEM2_LK);
+	if (!lck_val && count < MAX_CTL_CHECK) {
+		msleep(10);
+		count++;
+		goto lock_try;
+	}
+	writel(adapter->ahw->pci_func, (base + QLCNIC_FLASH_LOCK_ID));
+	for (i = 0; i < size; i++) {
+		addr = fl_addr & 0xFFFF0000;
+		QLCNIC_WR_DUMP_REG(FLASH_ROM_WINDOW, base, addr);
+		addr = LSW(fl_addr) + FLASH_ROM_DATA;
+		QLCNIC_RD_DUMP_REG(addr, base, &val);
+		fl_addr += 4;
+		*buffer++ = cpu_to_le32(val);
+	}
+	readl(base + QLCNIC_FLASH_SEM2_ULK);
+	return rom->size;
+}
+
+static u32
+qlcnic_dump_l1_cache(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	int i;
+	u32 cnt, val, data, addr;
+	void __iomem *base = adapter->ahw->pci_base0;
+	struct __cache *l1 = &entry->region.cache;
+
+	val = l1->init_tag_val;
+
+	for (i = 0; i < l1->no_ops; i++) {
+		QLCNIC_WR_DUMP_REG(l1->addr, base, val);
+		QLCNIC_WR_DUMP_REG(l1->ctrl_addr, base, LSW(l1->ctrl_val));
+		addr = l1->read_addr;
+		cnt = l1->read_addr_num;
+		while (cnt) {
+			QLCNIC_RD_DUMP_REG(addr, base, &data);
+			*buffer++ = cpu_to_le32(data);
+			addr += l1->read_addr_stride;
+			cnt--;
+		}
+		val += l1->stride;
+	}
+	return l1->no_ops * l1->read_addr_num * sizeof(u32);
+}
+
+static u32
+qlcnic_dump_l2_cache(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	int i;
+	u32 cnt, val, data, addr;
+	u8 poll_mask, poll_to, time_out = 0;
+	void __iomem *base = adapter->ahw->pci_base0;
+	struct __cache *l2 = &entry->region.cache;
+
+	val = l2->init_tag_val;
+	poll_mask = LSB(MSW(l2->ctrl_val));
+	poll_to = MSB(MSW(l2->ctrl_val));
+
+	for (i = 0; i < l2->no_ops; i++) {
+		QLCNIC_WR_DUMP_REG(l2->addr, base, val);
+		do {
+			QLCNIC_WR_DUMP_REG(l2->ctrl_addr, base,
+				LSW(l2->ctrl_val));
+			QLCNIC_RD_DUMP_REG(l2->ctrl_addr, base, &data);
+			if (!(data & poll_mask))
+				break;
+			msleep(1);
+			time_out++;
+		} while (time_out <= poll_to);
+		if (time_out > poll_to)
+			return -EINVAL;
+
+		addr = l2->read_addr;
+		cnt = l2->read_addr_num;
+		while (cnt) {
+			QLCNIC_RD_DUMP_REG(addr, base, &data);
+			*buffer++ = cpu_to_le32(data);
+			addr += l2->read_addr_stride;
+			cnt--;
+		}
+		val += l2->stride;
+	}
+	return l2->no_ops * l2->read_addr_num * sizeof(u32);
+}
+
+static u32
+qlcnic_read_memory(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	u32 addr, data, test, ret = 0;
+	int i, reg_read;
+	struct __mem *mem = &entry->region.mem;
+	void __iomem *base = adapter->ahw->pci_base0;
+
+	reg_read = mem->size;
+	addr = mem->addr;
+	/* check for data size of multiple of 16 and 16 byte alignment */
+	if ((addr & 0xf) || (reg_read%16)) {
+		dev_info(&adapter->pdev->dev,
+			"Unaligned memory addr:0x%x size:0x%x\n",
+			addr, reg_read);
+		return -EINVAL;
+	}
+
+	mutex_lock(&adapter->ahw->mem_lock);
+
+	while (reg_read != 0) {
+		QLCNIC_WR_DUMP_REG(MIU_TEST_ADDR_LO, base, addr);
+		QLCNIC_WR_DUMP_REG(MIU_TEST_ADDR_HI, base, 0);
+		QLCNIC_WR_DUMP_REG(MIU_TEST_CTR, base,
+			TA_CTL_ENABLE | TA_CTL_START);
+
+		for (i = 0; i < MAX_CTL_CHECK; i++) {
+			QLCNIC_RD_DUMP_REG(MIU_TEST_CTR, base, &test);
+			if (!(test & TA_CTL_BUSY))
+				break;
+		}
+		if (i == MAX_CTL_CHECK) {
+			if (printk_ratelimit()) {
+				dev_err(&adapter->pdev->dev,
+					"failed to read through agent\n");
+				ret = -EINVAL;
+				goto out;
+			}
+		}
+		for (i = 0; i < 4; i++) {
+			QLCNIC_RD_DUMP_REG(MIU_TEST_READ_DATA[i], base, &data);
+			*buffer++ = cpu_to_le32(data);
+		}
+		addr += 16;
+		reg_read -= 16;
+		ret += 16;
+	}
+out:
+	mutex_unlock(&adapter->ahw->mem_lock);
+	return mem->size;
+}
+
+static u32
+qlcnic_dump_nop(struct qlcnic_adapter *adapter,
+	struct qlcnic_dump_entry *entry, u32 *buffer)
+{
+	entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+	return 0;
+}
+
+struct qlcnic_dump_operations fw_dump_ops[] = {
+	{ QLCNIC_DUMP_NOP, qlcnic_dump_nop },
+	{ QLCNIC_DUMP_READ_CRB, qlcnic_dump_crb },
+	{ QLCNIC_DUMP_READ_MUX, qlcnic_dump_mux },
+	{ QLCNIC_DUMP_QUEUE, qlcnic_dump_que },
+	{ QLCNIC_DUMP_BRD_CONFIG, qlcnic_read_rom },
+	{ QLCNIC_DUMP_READ_OCM, qlcnic_dump_ocm },
+	{ QLCNIC_DUMP_PEG_REG, qlcnic_dump_ctrl },
+	{ QLCNIC_DUMP_L1_DTAG, qlcnic_dump_l1_cache },
+	{ QLCNIC_DUMP_L1_ITAG, qlcnic_dump_l1_cache },
+	{ QLCNIC_DUMP_L1_DATA, qlcnic_dump_l1_cache },
+	{ QLCNIC_DUMP_L1_INST, qlcnic_dump_l1_cache },
+	{ QLCNIC_DUMP_L2_DTAG, qlcnic_dump_l2_cache },
+	{ QLCNIC_DUMP_L2_ITAG, qlcnic_dump_l2_cache },
+	{ QLCNIC_DUMP_L2_DATA, qlcnic_dump_l2_cache },
+	{ QLCNIC_DUMP_L2_INST, qlcnic_dump_l2_cache },
+	{ QLCNIC_DUMP_READ_ROM, qlcnic_read_rom },
+	{ QLCNIC_DUMP_READ_MEM, qlcnic_read_memory },
+	{ QLCNIC_DUMP_READ_CTRL, qlcnic_dump_ctrl },
+	{ QLCNIC_DUMP_TLHDR, qlcnic_dump_nop },
+	{ QLCNIC_DUMP_RDEND, qlcnic_dump_nop },
+};
+
+/* Walk the template and collect dump for each entry in the dump template */
+static int
+qlcnic_valid_dump_entry(struct device *dev, struct qlcnic_dump_entry *entry,
+	u32 size)
+{
+	int ret = 1;
+	if (size != entry->hdr.cap_size) {
+		dev_info(dev,
+		"Invalidate dump, Type:%d\tMask:%d\tSize:%dCap_size:%d\n",
+		entry->hdr.type, entry->hdr.mask, size, entry->hdr.cap_size);
+		dev_info(dev, "Aborting further dump capture\n");
+		ret = 0;
+	}
+	return ret;
+}
+
+int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
+{
+	u32 *buffer;
+	char mesg[64];
+	char *msg[] = {mesg, NULL};
+	int i, k, ops_cnt, ops_index, dump_size = 0;
+	u32 entry_offset, dump, no_entries, buf_offset = 0;
+	struct qlcnic_dump_entry *entry;
+	struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+	struct qlcnic_dump_template_hdr *tmpl_hdr = fw_dump->tmpl_hdr;
+
+	if (fw_dump->clr) {
+		dev_info(&adapter->pdev->dev,
+			"Previous dump not cleared, not capturing dump\n");
+		return -EIO;
+	}
+	/* Calculate the size for dump data area only */
+	for (i = 2, k = 1; (i & QLCNIC_DUMP_MASK_MAX); i <<= 1, k++)
+		if (i & tmpl_hdr->drv_cap_mask)
+			dump_size += tmpl_hdr->cap_sizes[k];
+	if (!dump_size)
+		return -EIO;
+
+	fw_dump->data = vzalloc(dump_size);
+	if (!fw_dump->data) {
+		dev_info(&adapter->pdev->dev,
+			"Unable to allocate (%d KB) for fw dump\n",
+			dump_size/1024);
+		return -ENOMEM;
+	}
+	buffer = fw_dump->data;
+	fw_dump->size = dump_size;
+	no_entries = tmpl_hdr->num_entries;
+	ops_cnt = ARRAY_SIZE(fw_dump_ops);
+	entry_offset = tmpl_hdr->offset;
+	tmpl_hdr->sys_info[0] = QLCNIC_DRIVER_VERSION;
+	tmpl_hdr->sys_info[1] = adapter->fw_version;
+
+	for (i = 0; i < no_entries; i++) {
+		entry = (struct qlcnic_dump_entry *) ((void *) tmpl_hdr +
+			entry_offset);
+		if (!(entry->hdr.mask & tmpl_hdr->drv_cap_mask)) {
+			entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+			entry_offset += entry->hdr.offset;
+			continue;
+		}
+		/* Find the handler for this entry */
+		ops_index = 0;
+		while (ops_index < ops_cnt) {
+			if (entry->hdr.type == fw_dump_ops[ops_index].opcode)
+				break;
+			ops_index++;
+		}
+		if (ops_index == ops_cnt) {
+			dev_info(&adapter->pdev->dev,
+				"Invalid entry type %d, exiting dump\n",
+				entry->hdr.type);
+			goto error;
+		}
+		/* Collect dump for this entry */
+		dump = fw_dump_ops[ops_index].handler(adapter, entry, buffer);
+		if (dump && !qlcnic_valid_dump_entry(&adapter->pdev->dev, entry,
+			dump))
+			entry->hdr.flags |= QLCNIC_DUMP_SKIP;
+		buf_offset += entry->hdr.cap_size;
+		entry_offset += entry->hdr.offset;
+		buffer = fw_dump->data + buf_offset;
+	}
+	if (dump_size != buf_offset) {
+		dev_info(&adapter->pdev->dev,
+			"Captured(%d) and expected size(%d) do not match\n",
+			buf_offset, dump_size);
+		goto error;
+	} else {
+		fw_dump->clr = 1;
+		snprintf(mesg, sizeof(mesg), "FW dump for device: %d\n",
+			adapter->pdev->devfn);
+		dev_info(&adapter->pdev->dev, "Dump data, %d bytes captured\n",
+			fw_dump->size);
+		/* Send a udev event to notify availability of FW dump */
+		kobject_uevent_env(&adapter->pdev->dev.kobj, KOBJ_CHANGE, msg);
+		return 0;
+	}
+error:
+	vfree(fw_dump->data);
+	return -EINVAL;
+}
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index a7f1d5b7e81..5b8bbcf904d 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -94,7 +94,7 @@ void qlcnic_release_rx_buffers(struct qlcnic_adapter *adapter)
 	struct qlcnic_rx_buffer *rx_buf;
 	int i, ring;
 
-	recv_ctx = &adapter->recv_ctx;
+	recv_ctx = adapter->recv_ctx;
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
 		for (i = 0; i < rds_ring->num_desc; ++i) {
@@ -119,7 +119,7 @@ void qlcnic_reset_rx_buffers_list(struct qlcnic_adapter *adapter)
 	struct qlcnic_rx_buffer *rx_buf;
 	int i, ring;
 
-	recv_ctx = &adapter->recv_ctx;
+	recv_ctx = adapter->recv_ctx;
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
 
@@ -173,7 +173,7 @@ void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter)
 	struct qlcnic_host_tx_ring *tx_ring;
 	int ring;
 
-	recv_ctx = &adapter->recv_ctx;
+	recv_ctx = adapter->recv_ctx;
 
 	if (recv_ctx->rds_rings == NULL)
 		goto skip_rds;
@@ -226,7 +226,7 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter)
 	}
 	tx_ring->cmd_buf_arr = cmd_buf_arr;
 
-	recv_ctx = &adapter->recv_ctx;
+	recv_ctx = adapter->recv_ctx;
 
 	size = adapter->max_rds_rings * sizeof(struct qlcnic_host_rds_ring);
 	rds_ring = kzalloc(size, GFP_KERNEL);
@@ -345,7 +345,7 @@ static int qlcnic_wait_rom_done(struct qlcnic_adapter *adapter)
 }
 
 static int do_rom_fast_read(struct qlcnic_adapter *adapter,
-			    int addr, int *valp)
+			    u32 addr, u32 *valp)
 {
 	QLCWR32(adapter, QLCNIC_ROMUSB_ROM_ADDRESS, addr);
 	QLCWR32(adapter, QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
@@ -398,7 +398,7 @@ qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
 	return ret;
 }
 
-int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp)
+int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, u32 addr, u32 *valp)
 {
 	int ret;
 
@@ -864,7 +864,7 @@ nomn:
 	for (i = 0; i < entries; i++) {
 
 		__le32 flags, file_chiprev, offs;
-		u8 chiprev = adapter->ahw.revision_id;
+		u8 chiprev = adapter->ahw->revision_id;
 		u32 flagbit;
 
 		offs = cpu_to_le32(ptab_descr->findex) +
@@ -1130,9 +1130,20 @@ qlcnic_load_firmware(struct qlcnic_adapter *adapter)
 	} else {
 		u64 data;
 		u32 hi, lo;
-
-		size = (QLCNIC_IMAGE_START - QLCNIC_BOOTLD_START) / 8;
-		flashaddr = QLCNIC_BOOTLD_START;
+		int ret;
+		struct qlcnic_flt_entry bootld_entry;
+
+		ret = qlcnic_get_flt_entry(adapter, QLCNIC_BOOTLD_REGION,
+					&bootld_entry);
+		if (!ret) {
+			size = bootld_entry.size / 8;
+			flashaddr = bootld_entry.start_addr;
+		} else {
+			size = (QLCNIC_IMAGE_START - QLCNIC_BOOTLD_START) / 8;
+			flashaddr = QLCNIC_BOOTLD_START;
+			dev_info(&pdev->dev,
+				"using legacy method to get flash fw region");
+		}
 
 		for (i = 0; i < size; i++) {
 			if (qlcnic_rom_fast_read(adapter,
@@ -1379,8 +1390,8 @@ static struct sk_buff *qlcnic_process_rxbuf(struct qlcnic_adapter *adapter,
 
 	skb = buffer->skb;
 
-	if (likely(adapter->rx_csum && (cksum == STATUS_CKSUM_OK ||
-						cksum == STATUS_CKSUM_LOOP))) {
+	if (likely((adapter->netdev->features & NETIF_F_RXCSUM) &&
+	    (cksum == STATUS_CKSUM_OK || cksum == STATUS_CKSUM_LOOP))) {
 		adapter->stats.csummed++;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	} else {
@@ -1394,7 +1405,7 @@ static struct sk_buff *qlcnic_process_rxbuf(struct qlcnic_adapter *adapter,
 	return skb;
 }
 
-static int
+static inline int
 qlcnic_check_rx_tagging(struct qlcnic_adapter *adapter, struct sk_buff *skb,
 			u16 *vlan_tag)
 {
@@ -1425,7 +1436,7 @@ qlcnic_process_rcv(struct qlcnic_adapter *adapter,
 		int ring, u64 sts_data0)
 {
 	struct net_device *netdev = adapter->netdev;
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 	struct qlcnic_rx_buffer *buffer;
 	struct sk_buff *skb;
 	struct qlcnic_host_rds_ring *rds_ring;
@@ -1467,10 +1478,10 @@ qlcnic_process_rcv(struct qlcnic_adapter *adapter,
 
 	skb->protocol = eth_type_trans(skb, netdev);
 
-	if ((vid != 0xffff) && adapter->vlgrp)
-		vlan_gro_receive(&sds_ring->napi, adapter->vlgrp, vid, skb);
-	else
-		napi_gro_receive(&sds_ring->napi, skb);
+	if (vid != 0xffff)
+		__vlan_hwaccel_put_tag(skb, vid);
+
+	napi_gro_receive(&sds_ring->napi, skb);
 
 	adapter->stats.rx_pkts++;
 	adapter->stats.rxbytes += length;
@@ -1488,7 +1499,7 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter,
 		int ring, u64 sts_data0, u64 sts_data1)
 {
 	struct net_device *netdev = adapter->netdev;
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 	struct qlcnic_rx_buffer *buffer;
 	struct sk_buff *skb;
 	struct qlcnic_host_rds_ring *rds_ring;
@@ -1552,10 +1563,9 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter,
 
 	length = skb->len;
 
-	if ((vid != 0xffff) && adapter->vlgrp)
-		vlan_hwaccel_receive_skb(skb, adapter->vlgrp, vid);
-	else
-		netif_receive_skb(skb);
+	if (vid != 0xffff)
+		__vlan_hwaccel_put_tag(skb, vid);
+	netif_receive_skb(skb);
 
 	adapter->stats.lro_pkts++;
 	adapter->stats.lrobytes += length;
@@ -1625,7 +1635,7 @@ skip:
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		struct qlcnic_host_rds_ring *rds_ring =
-			&adapter->recv_ctx.rds_rings[ring];
+			&adapter->recv_ctx->rds_rings[ring];
 
 		if (!list_empty(&sds_ring->free_list[ring])) {
 			list_for_each(cur, &sds_ring->free_list[ring]) {
@@ -1651,12 +1661,13 @@ skip:
 }
 
 void
-qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
+qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter,
 	struct qlcnic_host_rds_ring *rds_ring)
 {
 	struct rcv_desc *pdesc;
 	struct qlcnic_rx_buffer *buffer;
-	int producer, count = 0;
+	int count = 0;
+	u32 producer;
 	struct list_head *head;
 
 	producer = rds_ring->producer;
@@ -1696,7 +1707,8 @@ qlcnic_post_rx_buffers_nodb(struct qlcnic_adapter *adapter,
 {
 	struct rcv_desc *pdesc;
 	struct qlcnic_rx_buffer *buffer;
-	int producer, count = 0;
+	int  count = 0;
+	uint32_t producer;
 	struct list_head *head;
 
 	if (!spin_trylock(&rds_ring->lock))
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index cd88c7e1bfa..3ab7d2c7baf 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -13,12 +13,12 @@
 
 #include <linux/swab.h>
 #include <linux/dma-mapping.h>
-#include <linux/if_vlan.h>
 #include <net/ip.h>
 #include <linux/ipv6.h>
 #include <linux/inetdevice.h>
 #include <linux/sysfs.h>
 #include <linux/aer.h>
+#include <linux/log2.h>
 
 MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver");
 MODULE_LICENSE("GPL");
@@ -98,6 +98,9 @@ static int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *, u32);
 static int qlcnicvf_start_firmware(struct qlcnic_adapter *);
 static void qlcnic_set_netdev_features(struct qlcnic_adapter *,
 				struct qlcnic_esw_func_cfg *);
+static void qlcnic_vlan_rx_add(struct net_device *, u16);
+static void qlcnic_vlan_rx_del(struct net_device *, u16);
+
 /*  PCI Device ID Table  */
 #define ENTRY(device) \
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, (device)), \
@@ -113,7 +116,7 @@ static DEFINE_PCI_DEVICE_TABLE(qlcnic_pci_tbl) = {
 MODULE_DEVICE_TABLE(pci, qlcnic_pci_tbl);
 
 
-void
+inline void
 qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
 		struct qlcnic_host_tx_ring *tx_ring)
 {
@@ -169,7 +172,7 @@ qlcnic_napi_add(struct qlcnic_adapter *adapter, struct net_device *netdev)
 {
 	int ring;
 	struct qlcnic_host_sds_ring *sds_ring;
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	if (qlcnic_alloc_sds_rings(recv_ctx, adapter->max_sds_rings))
 		return -ENOMEM;
@@ -193,14 +196,14 @@ qlcnic_napi_del(struct qlcnic_adapter *adapter)
 {
 	int ring;
 	struct qlcnic_host_sds_ring *sds_ring;
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
 		netif_napi_del(&sds_ring->napi);
 	}
 
-	qlcnic_free_sds_rings(&adapter->recv_ctx);
+	qlcnic_free_sds_rings(adapter->recv_ctx);
 }
 
 static void
@@ -208,7 +211,7 @@ qlcnic_napi_enable(struct qlcnic_adapter *adapter)
 {
 	int ring;
 	struct qlcnic_host_sds_ring *sds_ring;
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
 		return;
@@ -225,7 +228,7 @@ qlcnic_napi_disable(struct qlcnic_adapter *adapter)
 {
 	int ring;
 	struct qlcnic_host_sds_ring *sds_ring;
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
 		return;
@@ -317,13 +320,6 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p)
 	return 0;
 }
 
-static void qlcnic_vlan_rx_register(struct net_device *netdev,
-		struct vlan_group *grp)
-{
-	struct qlcnic_adapter *adapter = netdev_priv(netdev);
-	adapter->vlgrp = grp;
-}
-
 static const struct net_device_ops qlcnic_netdev_ops = {
 	.ndo_open	   = qlcnic_open,
 	.ndo_stop	   = qlcnic_close,
@@ -333,8 +329,11 @@ static const struct net_device_ops qlcnic_netdev_ops = {
 	.ndo_set_multicast_list = qlcnic_set_multi,
 	.ndo_set_mac_address    = qlcnic_set_mac,
 	.ndo_change_mtu	   = qlcnic_change_mtu,
+	.ndo_fix_features  = qlcnic_fix_features,
+	.ndo_set_features  = qlcnic_set_features,
 	.ndo_tx_timeout	   = qlcnic_tx_timeout,
-	.ndo_vlan_rx_register = qlcnic_vlan_rx_register,
+	.ndo_vlan_rx_add_vid	= qlcnic_vlan_rx_add,
+	.ndo_vlan_rx_kill_vid	= qlcnic_vlan_rx_del,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = qlcnic_poll_controller,
 #endif
@@ -352,72 +351,87 @@ static struct qlcnic_nic_template qlcnic_vf_ops = {
 	.start_firmware = qlcnicvf_start_firmware
 };
 
-static void
-qlcnic_setup_intr(struct qlcnic_adapter *adapter)
+static int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
 {
-	const struct qlcnic_legacy_intr_set *legacy_intrp;
 	struct pci_dev *pdev = adapter->pdev;
-	int err, num_msix;
-
-	if (adapter->rss_supported) {
-		num_msix = (num_online_cpus() >= MSIX_ENTRIES_PER_ADAPTER) ?
-			MSIX_ENTRIES_PER_ADAPTER : 2;
-	} else
-		num_msix = 1;
+	int err = -1;
 
 	adapter->max_sds_rings = 1;
-
 	adapter->flags &= ~(QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED);
-
-	legacy_intrp = &legacy_intr[adapter->ahw.pci_func];
-
-	adapter->int_vec_bit = legacy_intrp->int_vec_bit;
-	adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
-			legacy_intrp->tgt_status_reg);
-	adapter->tgt_mask_reg = qlcnic_get_ioaddr(adapter,
-			legacy_intrp->tgt_mask_reg);
-	adapter->isr_int_vec = qlcnic_get_ioaddr(adapter, ISR_INT_VECTOR);
-
-	adapter->crb_int_state_reg = qlcnic_get_ioaddr(adapter,
-			ISR_INT_STATE_REG);
-
 	qlcnic_set_msix_bit(pdev, 0);
 
 	if (adapter->msix_supported) {
-
+ enable_msix:
 		qlcnic_init_msix_entries(adapter, num_msix);
 		err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
 		if (err == 0) {
 			adapter->flags |= QLCNIC_MSIX_ENABLED;
 			qlcnic_set_msix_bit(pdev, 1);
 
-			if (adapter->rss_supported)
-				adapter->max_sds_rings = num_msix;
+			adapter->max_sds_rings = num_msix;
 
 			dev_info(&pdev->dev, "using msi-x interrupts\n");
-			return;
+			return err;
 		}
+		if (err > 0) {
+			num_msix = rounddown_pow_of_two(err);
+			if (num_msix)
+				goto enable_msix;
+		}
+	}
+	return err;
+}
 
-		if (err > 0)
-			pci_disable_msix(pdev);
 
-		/* fall through for msi */
-	}
+static void qlcnic_enable_msi_legacy(struct qlcnic_adapter *adapter)
+{
+	const struct qlcnic_legacy_intr_set *legacy_intrp;
+	struct pci_dev *pdev = adapter->pdev;
 
 	if (use_msi && !pci_enable_msi(pdev)) {
 		adapter->flags |= QLCNIC_MSI_ENABLED;
 		adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
-				msi_tgt_status[adapter->ahw.pci_func]);
+				msi_tgt_status[adapter->ahw->pci_func]);
 		dev_info(&pdev->dev, "using msi interrupts\n");
 		adapter->msix_entries[0].vector = pdev->irq;
 		return;
 	}
 
+	legacy_intrp = &legacy_intr[adapter->ahw->pci_func];
+
+	adapter->int_vec_bit = legacy_intrp->int_vec_bit;
+	adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
+			legacy_intrp->tgt_status_reg);
+	adapter->tgt_mask_reg = qlcnic_get_ioaddr(adapter,
+			legacy_intrp->tgt_mask_reg);
+	adapter->isr_int_vec = qlcnic_get_ioaddr(adapter, ISR_INT_VECTOR);
+
+	adapter->crb_int_state_reg = qlcnic_get_ioaddr(adapter,
+			ISR_INT_STATE_REG);
 	dev_info(&pdev->dev, "using legacy interrupts\n");
 	adapter->msix_entries[0].vector = pdev->irq;
 }
 
 static void
+qlcnic_setup_intr(struct qlcnic_adapter *adapter)
+{
+	int num_msix;
+
+	if (adapter->msix_supported) {
+		num_msix = (num_online_cpus() >=
+			QLCNIC_DEF_NUM_STS_DESC_RINGS) ?
+			QLCNIC_DEF_NUM_STS_DESC_RINGS :
+			QLCNIC_MIN_NUM_RSS_RINGS;
+	} else
+		num_msix = 1;
+
+	if (!qlcnic_enable_msix(adapter, num_msix))
+		return;
+
+	qlcnic_enable_msi_legacy(adapter);
+}
+
+static void
 qlcnic_teardown_intr(struct qlcnic_adapter *adapter)
 {
 	if (adapter->flags & QLCNIC_MSIX_ENABLED)
@@ -429,8 +443,8 @@ qlcnic_teardown_intr(struct qlcnic_adapter *adapter)
 static void
 qlcnic_cleanup_pci_map(struct qlcnic_adapter *adapter)
 {
-	if (adapter->ahw.pci_base0 != NULL)
-		iounmap(adapter->ahw.pci_base0);
+	if (adapter->ahw->pci_base0 != NULL)
+		iounmap(adapter->ahw->pci_base0);
 }
 
 static int
@@ -464,8 +478,10 @@ qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
 
 	for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
 		pfn = pci_info[i].id;
-		if (pfn > QLCNIC_MAX_PCI_FUNC)
-			return QL_STATUS_INVALID_PARAM;
+		if (pfn > QLCNIC_MAX_PCI_FUNC) {
+			ret = QL_STATUS_INVALID_PARAM;
+			goto err_eswitch;
+		}
 		adapter->npars[pfn].active = (u8)pci_info[i].active;
 		adapter->npars[pfn].type = (u8)pci_info[i].type;
 		adapter->npars[pfn].phy_port = (u8)pci_info[i].default_port;
@@ -498,7 +514,7 @@ qlcnic_set_function_modes(struct qlcnic_adapter *adapter)
 	u32 ref_count;
 	int i, ret = 1;
 	u32 data = QLCNIC_MGMT_FUNC;
-	void __iomem *priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+	void __iomem *priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE;
 
 	/* If other drivers are not in use set their privilege level */
 	ref_count = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
@@ -510,16 +526,16 @@ qlcnic_set_function_modes(struct qlcnic_adapter *adapter)
 		for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
 			id = i;
 			if (adapter->npars[i].type != QLCNIC_TYPE_NIC ||
-				id == adapter->ahw.pci_func)
+				id == adapter->ahw->pci_func)
 				continue;
 			data |= (qlcnic_config_npars &
 					QLC_DEV_SET_DRV(0xf, id));
 		}
 	} else {
 		data = readl(priv_op);
-		data = (data & ~QLC_DEV_SET_DRV(0xf, adapter->ahw.pci_func)) |
+		data = (data & ~QLC_DEV_SET_DRV(0xf, adapter->ahw->pci_func)) |
 			(QLC_DEV_SET_DRV(QLCNIC_MGMT_FUNC,
-			adapter->ahw.pci_func));
+			adapter->ahw->pci_func));
 	}
 	writel(data, priv_op);
 	qlcnic_api_unlock(adapter);
@@ -537,22 +553,23 @@ qlcnic_check_vf(struct qlcnic_adapter *adapter)
 	u32 op_mode, priv_level;
 
 	/* Determine FW API version */
-	adapter->fw_hal_version = readl(adapter->ahw.pci_base0 + QLCNIC_FW_API);
+	adapter->fw_hal_version = readl(adapter->ahw->pci_base0 +
+					QLCNIC_FW_API);
 
 	/* Find PCI function number */
 	pci_read_config_dword(adapter->pdev, QLCNIC_MSIX_TABLE_OFFSET, &func);
-	msix_base_addr = adapter->ahw.pci_base0 + QLCNIC_MSIX_BASE;
+	msix_base_addr = adapter->ahw->pci_base0 + QLCNIC_MSIX_BASE;
 	msix_base = readl(msix_base_addr);
 	func = (func - msix_base)/QLCNIC_MSIX_TBL_PGSIZE;
-	adapter->ahw.pci_func = func;
+	adapter->ahw->pci_func = func;
 
 	/* Determine function privilege level */
-	priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+	priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE;
 	op_mode = readl(priv_op);
 	if (op_mode == QLC_DEV_DRV_DEFAULT)
 		priv_level = QLCNIC_MGMT_FUNC;
 	else
-		priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw.pci_func);
+		priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw->pci_func);
 
 	if (priv_level == QLCNIC_NON_PRIV_FUNC) {
 		adapter->op_mode = QLCNIC_NON_PRIV_FUNC;
@@ -591,13 +608,14 @@ qlcnic_setup_pci_map(struct qlcnic_adapter *adapter)
 
 	dev_info(&pdev->dev, "%dMB memory map\n", (int)(mem_len>>20));
 
-	adapter->ahw.pci_base0 = mem_ptr0;
-	adapter->ahw.pci_len0 = pci_len0;
+	adapter->ahw->pci_base0 = mem_ptr0;
+	adapter->ahw->pci_len0 = pci_len0;
 
 	qlcnic_check_vf(adapter);
 
-	adapter->ahw.ocm_win_crb = qlcnic_get_ioaddr(adapter,
-		QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(adapter->ahw.pci_func)));
+	adapter->ahw->ocm_win_crb = qlcnic_get_ioaddr(adapter,
+		QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(
+			adapter->ahw->pci_func)));
 
 	return 0;
 }
@@ -639,7 +657,7 @@ qlcnic_check_options(struct qlcnic_adapter *adapter)
 
 	dev_info(&pdev->dev, "firmware v%d.%d.%d\n",
 			fw_major, fw_minor, fw_build);
-	if (adapter->ahw.port_type == QLCNIC_XGBE) {
+	if (adapter->ahw->port_type == QLCNIC_XGBE) {
 		if (adapter->flags & QLCNIC_ESWITCH_ENABLED) {
 			adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_VF;
 			adapter->max_rxd = MAX_RCV_DESCRIPTORS_VF;
@@ -651,7 +669,7 @@ qlcnic_check_options(struct qlcnic_adapter *adapter)
 		adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
 		adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
 
-	} else if (adapter->ahw.port_type == QLCNIC_GBE) {
+	} else if (adapter->ahw->port_type == QLCNIC_GBE) {
 		adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G;
 		adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
 		adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
@@ -659,7 +677,6 @@ qlcnic_check_options(struct qlcnic_adapter *adapter)
 	}
 
 	adapter->msix_supported = !!use_msi_x;
-	adapter->rss_supported = !!use_msi_x;
 
 	adapter->num_txd = MAX_CMD_DESCRIPTORS;
 
@@ -672,7 +689,7 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter)
 	int err;
 	struct qlcnic_info nic_info;
 
-	err = qlcnic_get_nic_info(adapter, &nic_info, adapter->ahw.pci_func);
+	err = qlcnic_get_nic_info(adapter, &nic_info, adapter->ahw->pci_func);
 	if (err)
 		return err;
 
@@ -708,6 +725,22 @@ qlcnic_set_vlan_config(struct qlcnic_adapter *adapter,
 }
 
 static void
+qlcnic_vlan_rx_add(struct net_device *netdev, u16 vid)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	set_bit(vid, adapter->vlans);
+}
+
+static void
+qlcnic_vlan_rx_del(struct net_device *netdev, u16 vid)
+{
+	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+
+	qlcnic_restore_indev_addr(netdev, NETDEV_DOWN);
+	clear_bit(vid, adapter->vlans);
+}
+
+static void
 qlcnic_set_eswitch_port_features(struct qlcnic_adapter *adapter,
 		struct qlcnic_esw_func_cfg *esw_cfg)
 {
@@ -734,7 +767,7 @@ qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter)
 	if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
 		return 0;
 
-	esw_cfg.pci_func = adapter->ahw.pci_func;
+	esw_cfg.pci_func = adapter->ahw->pci_func;
 	if (qlcnic_get_eswitch_port_config(adapter, &esw_cfg))
 			return -EIO;
 	qlcnic_set_vlan_config(adapter, &esw_cfg);
@@ -750,28 +783,27 @@ qlcnic_set_netdev_features(struct qlcnic_adapter *adapter,
 	struct net_device *netdev = adapter->netdev;
 	unsigned long features, vlan_features;
 
-	features = (NETIF_F_SG | NETIF_F_IP_CSUM |
+	features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
 			NETIF_F_IPV6_CSUM | NETIF_F_GRO);
 	vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM |
-			NETIF_F_IPV6_CSUM);
+			NETIF_F_IPV6_CSUM | NETIF_F_HW_VLAN_FILTER);
 
 	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO) {
 		features |= (NETIF_F_TSO | NETIF_F_TSO6);
 		vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6);
 	}
-	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
+
+	if (netdev->features & NETIF_F_LRO)
 		features |= NETIF_F_LRO;
 
 	if (esw_cfg->offload_flags & BIT_0) {
 		netdev->features |= features;
-		adapter->rx_csum = 1;
 		if (!(esw_cfg->offload_flags & BIT_1))
 			netdev->features &= ~NETIF_F_TSO;
 		if (!(esw_cfg->offload_flags & BIT_2))
 			netdev->features &= ~NETIF_F_TSO6;
 	} else {
 		netdev->features &= ~features;
-		adapter->rx_csum = 0;
 	}
 
 	netdev->vlan_features = (features & vlan_features);
@@ -791,14 +823,14 @@ qlcnic_check_eswitch_mode(struct qlcnic_adapter *adapter)
 	if (adapter->flags & QLCNIC_ADAPTER_INITIALIZED)
 		return 0;
 
-	priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+	priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE;
 	op_mode = readl(priv_op);
-	priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw.pci_func);
+	priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw->pci_func);
 
 	if (op_mode == QLC_DEV_DRV_DEFAULT)
 		priv_level = QLCNIC_MGMT_FUNC;
 	else
-		priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw.pci_func);
+		priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw->pci_func);
 
 	if (adapter->flags & QLCNIC_ESWITCH_ENABLED) {
 		if (priv_level == QLCNIC_MGMT_FUNC) {
@@ -1038,7 +1070,7 @@ qlcnic_request_irq(struct qlcnic_adapter *adapter)
 
 	unsigned long flags = 0;
 	struct net_device *netdev = adapter->netdev;
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
 		handler = qlcnic_tmp_intr;
@@ -1075,7 +1107,7 @@ qlcnic_free_irq(struct qlcnic_adapter *adapter)
 	int ring;
 	struct qlcnic_host_sds_ring *sds_ring;
 
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
@@ -1083,20 +1115,6 @@ qlcnic_free_irq(struct qlcnic_adapter *adapter)
 	}
 }
 
-static void
-qlcnic_init_coalesce_defaults(struct qlcnic_adapter *adapter)
-{
-	adapter->coal.flags = QLCNIC_INTR_DEFAULT;
-	adapter->coal.normal.data.rx_time_us =
-		QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US;
-	adapter->coal.normal.data.rx_packets =
-		QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS;
-	adapter->coal.normal.data.tx_time_us =
-		QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US;
-	adapter->coal.normal.data.tx_packets =
-		QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS;
-}
-
 static int
 __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev)
 {
@@ -1115,14 +1133,14 @@ __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev)
 		return -EIO;
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
-		rds_ring = &adapter->recv_ctx.rds_rings[ring];
-		qlcnic_post_rx_buffers(adapter, ring, rds_ring);
+		rds_ring = &adapter->recv_ctx->rds_rings[ring];
+		qlcnic_post_rx_buffers(adapter, rds_ring);
 	}
 
 	qlcnic_set_multi(netdev);
 	qlcnic_fw_cmd_set_mtu(adapter, netdev->mtu);
 
-	adapter->ahw.linkup = 0;
+	adapter->ahw->linkup = 0;
 
 	if (adapter->max_sds_rings > 1)
 		qlcnic_config_rss(adapter, 1);
@@ -1230,8 +1248,6 @@ qlcnic_attach(struct qlcnic_adapter *adapter)
 		goto err_out_free_hw;
 	}
 
-	qlcnic_init_coalesce_defaults(adapter);
-
 	qlcnic_create_sysfs_entries(adapter);
 
 	adapter->is_up = QLCNIC_ADAPTER_UP_MAGIC;
@@ -1272,7 +1288,7 @@ void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings)
 	clear_bit(__QLCNIC_DEV_UP, &adapter->state);
 	if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
 		for (ring = 0; ring < adapter->max_sds_rings; ring++) {
-			sds_ring = &adapter->recv_ctx.sds_rings[ring];
+			sds_ring = &adapter->recv_ctx->sds_rings[ring];
 			qlcnic_disable_int(sds_ring);
 		}
 	}
@@ -1293,6 +1309,48 @@ out:
 	netif_device_attach(netdev);
 }
 
+static int qlcnic_alloc_adapter_resources(struct qlcnic_adapter *adapter)
+{
+	int err = 0;
+	adapter->ahw = kzalloc(sizeof(struct qlcnic_hardware_context),
+				GFP_KERNEL);
+	if (!adapter->ahw) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to allocate recv ctx resources for adapter\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+	adapter->recv_ctx = kzalloc(sizeof(struct qlcnic_recv_context),
+				GFP_KERNEL);
+	if (!adapter->recv_ctx) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to allocate recv ctx resources for adapter\n");
+		kfree(adapter->ahw);
+		adapter->ahw = NULL;
+		err = -ENOMEM;
+		goto err_out;
+	}
+	/* Initialize interrupt coalesce parameters */
+	adapter->ahw->coal.flag = QLCNIC_INTR_DEFAULT;
+	adapter->ahw->coal.rx_time_us = QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US;
+	adapter->ahw->coal.rx_packets = QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS;
+err_out:
+	return err;
+}
+
+static void qlcnic_free_adapter_resources(struct qlcnic_adapter *adapter)
+{
+	kfree(adapter->recv_ctx);
+	adapter->recv_ctx = NULL;
+
+	if (adapter->ahw->fw_dump.tmpl_hdr) {
+		vfree(adapter->ahw->fw_dump.tmpl_hdr);
+		adapter->ahw->fw_dump.tmpl_hdr = NULL;
+	}
+	kfree(adapter->ahw);
+	adapter->ahw = NULL;
+}
+
 int qlcnic_diag_alloc_res(struct net_device *netdev, int test)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
@@ -1325,13 +1383,13 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test)
 	}
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
-		rds_ring = &adapter->recv_ctx.rds_rings[ring];
-		qlcnic_post_rx_buffers(adapter, ring, rds_ring);
+		rds_ring = &adapter->recv_ctx->rds_rings[ring];
+		qlcnic_post_rx_buffers(adapter, rds_ring);
 	}
 
 	if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
 		for (ring = 0; ring < adapter->max_sds_rings; ring++) {
-			sds_ring = &adapter->recv_ctx.sds_rings[ring];
+			sds_ring = &adapter->recv_ctx->sds_rings[ring];
 			qlcnic_enable_int(sds_ring);
 		}
 	}
@@ -1399,7 +1457,6 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter,
 	int err;
 	struct pci_dev *pdev = adapter->pdev;
 
-	adapter->rx_csum = 1;
 	adapter->mc_enabled = 0;
 	adapter->max_mc_count = 38;
 
@@ -1410,26 +1467,24 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter,
 
 	SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_ops);
 
-	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
-		NETIF_F_IPV6_CSUM | NETIF_F_GRO | NETIF_F_HW_VLAN_RX);
-	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
-		NETIF_F_IPV6_CSUM);
+	netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+		NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM;
 
-	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO) {
-		netdev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
-		netdev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6);
-	}
+	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO)
+		netdev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6;
+	if (pci_using_dac)
+		netdev->hw_features |= NETIF_F_HIGHDMA;
 
-	if (pci_using_dac) {
-		netdev->features |= NETIF_F_HIGHDMA;
-		netdev->vlan_features |= NETIF_F_HIGHDMA;
-	}
+	netdev->vlan_features = netdev->hw_features;
 
 	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_FVLANTX)
-		netdev->features |= (NETIF_F_HW_VLAN_TX);
-
+		netdev->hw_features |= NETIF_F_HW_VLAN_TX;
 	if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
-		netdev->features |= NETIF_F_LRO;
+		netdev->hw_features |= NETIF_F_LRO;
+
+	netdev->features |= netdev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
+
 	netdev->irq = adapter->msix_entries[0].vector;
 
 	netif_carrier_off(netdev);
@@ -1459,6 +1514,19 @@ static int qlcnic_set_dma_mask(struct pci_dev *pdev, u8 *pci_using_dac)
 	return 0;
 }
 
+static int
+qlcnic_alloc_msix_entries(struct qlcnic_adapter *adapter, u16 count)
+{
+	adapter->msix_entries = kcalloc(count, sizeof(struct msix_entry),
+					GFP_KERNEL);
+
+	if (adapter->msix_entries)
+		return 0;
+
+	dev_err(&adapter->pdev->dev, "failed allocating msix_entries\n");
+	return -ENOMEM;
+}
+
 static int __devinit
 qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -1501,23 +1569,30 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter = netdev_priv(netdev);
 	adapter->netdev  = netdev;
 	adapter->pdev    = pdev;
-	adapter->dev_rst_time = jiffies;
 
+	if (qlcnic_alloc_adapter_resources(adapter))
+		goto err_out_free_netdev;
+
+	adapter->dev_rst_time = jiffies;
 	revision_id = pdev->revision;
-	adapter->ahw.revision_id = revision_id;
+	adapter->ahw->revision_id = revision_id;
 
-	rwlock_init(&adapter->ahw.crb_lock);
-	mutex_init(&adapter->ahw.mem_lock);
+	rwlock_init(&adapter->ahw->crb_lock);
+	mutex_init(&adapter->ahw->mem_lock);
 
 	spin_lock_init(&adapter->tx_clean_lock);
 	INIT_LIST_HEAD(&adapter->mac_list);
 
 	err = qlcnic_setup_pci_map(adapter);
 	if (err)
-		goto err_out_free_netdev;
+		goto err_out_free_hw;
 
 	/* This will be reset for mezz cards  */
-	adapter->portnum = adapter->ahw.pci_func;
+	adapter->portnum = adapter->ahw->pci_func;
+
+	/* Get FW dump template and store it */
+	if (adapter->op_mode != QLCNIC_NON_PRIV_FUNC)
+		qlcnic_fw_cmd_get_minidump_temp(adapter);
 
 	err = qlcnic_get_board_info(adapter);
 	if (err) {
@@ -1545,11 +1620,15 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		pr_info("%s: %s Board Chip rev 0x%x\n",
 				module_name(THIS_MODULE),
-				brd_name, adapter->ahw.revision_id);
+				brd_name, adapter->ahw->revision_id);
 	}
 
 	qlcnic_clear_stats(adapter);
 
+	err = qlcnic_alloc_msix_entries(adapter, adapter->max_rx_ques);
+	if (err)
+		goto err_out_decr_ref;
+
 	qlcnic_setup_intr(adapter);
 
 	err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac);
@@ -1560,7 +1639,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY);
 
-	switch (adapter->ahw.port_type) {
+	switch (adapter->ahw->port_type) {
 	case QLCNIC_GBE:
 		dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
 				adapter->netdev->name);
@@ -1578,6 +1657,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 err_out_disable_msi:
 	qlcnic_teardown_intr(adapter);
+	kfree(adapter->msix_entries);
 
 err_out_decr_ref:
 	qlcnic_clr_all_drv_state(adapter, 0);
@@ -1585,6 +1665,9 @@ err_out_decr_ref:
 err_out_iounmap:
 	qlcnic_cleanup_pci_map(adapter);
 
+err_out_free_hw:
+	qlcnic_free_adapter_resources(adapter);
+
 err_out_free_netdev:
 	free_netdev(netdev);
 
@@ -1626,6 +1709,7 @@ static void __devexit qlcnic_remove(struct pci_dev *pdev)
 	qlcnic_free_lb_filters_mem(adapter);
 
 	qlcnic_teardown_intr(adapter);
+	kfree(adapter->msix_entries);
 
 	qlcnic_remove_diag_entries(adapter);
 
@@ -1638,6 +1722,7 @@ static void __devexit qlcnic_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 
+	qlcnic_free_adapter_resources(adapter);
 	free_netdev(netdev);
 }
 static int __qlcnic_shutdown(struct pci_dev *pdev)
@@ -1819,6 +1904,7 @@ static void qlcnic_change_filter(struct qlcnic_adapter *adapter,
 	vlan_req->vlan_id = vlan_id;
 
 	tx_ring->producer = get_next_index(producer, tx_ring->num_desc);
+	smp_mb();
 }
 
 #define QLCNIC_MAC_HASH(MAC)\
@@ -1879,58 +1965,122 @@ qlcnic_send_filter(struct qlcnic_adapter *adapter,
 	spin_unlock(&adapter->mac_learn_lock);
 }
 
-static void
-qlcnic_tso_check(struct net_device *netdev,
-		struct qlcnic_host_tx_ring *tx_ring,
+static int
+qlcnic_tx_pkt(struct qlcnic_adapter *adapter,
 		struct cmd_desc_type0 *first_desc,
 		struct sk_buff *skb)
 {
-	u8 opcode = TX_ETHER_PKT;
-	__be16 protocol = skb->protocol;
-	u16 flags = 0;
-	int copied, offset, copy_len, hdr_len = 0, tso = 0;
+	u8 opcode = 0, hdr_len = 0;
+	u16 flags = 0, vlan_tci = 0;
+	int copied, offset, copy_len;
 	struct cmd_desc_type0 *hwdesc;
 	struct vlan_ethhdr *vh;
-	struct qlcnic_adapter *adapter = netdev_priv(netdev);
+	struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
+	u16 protocol = ntohs(skb->protocol);
 	u32 producer = tx_ring->producer;
-	__le16 vlan_oob = first_desc->flags_opcode &
-				cpu_to_le16(FLAGS_VLAN_OOB);
+
+	if (protocol == ETH_P_8021Q) {
+		vh = (struct vlan_ethhdr *)skb->data;
+		flags = FLAGS_VLAN_TAGGED;
+		vlan_tci = vh->h_vlan_TCI;
+	} else if (vlan_tx_tag_present(skb)) {
+		flags = FLAGS_VLAN_OOB;
+		vlan_tci = vlan_tx_tag_get(skb);
+	}
+	if (unlikely(adapter->pvid)) {
+		if (vlan_tci && !(adapter->flags & QLCNIC_TAGGING_ENABLED))
+			return -EIO;
+		if (vlan_tci && (adapter->flags & QLCNIC_TAGGING_ENABLED))
+			goto set_flags;
+
+		flags = FLAGS_VLAN_OOB;
+		vlan_tci = adapter->pvid;
+	}
+set_flags:
+	qlcnic_set_tx_vlan_tci(first_desc, vlan_tci);
+	qlcnic_set_tx_flags_opcode(first_desc, flags, opcode);
 
 	if (*(skb->data) & BIT_0) {
 		flags |= BIT_0;
 		memcpy(&first_desc->eth_addr, skb->data, ETH_ALEN);
 	}
-
-	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
+	opcode = TX_ETHER_PKT;
+	if ((adapter->netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
 			skb_shinfo(skb)->gso_size > 0) {
 
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 
 		first_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
 		first_desc->total_hdr_length = hdr_len;
-		if (vlan_oob) {
+
+		opcode = (protocol == ETH_P_IPV6) ? TX_TCP_LSO6 : TX_TCP_LSO;
+
+		/* For LSO, we need to copy the MAC/IP/TCP headers into
+		* the descriptor ring */
+		copied = 0;
+		offset = 2;
+
+		if (flags & FLAGS_VLAN_OOB) {
 			first_desc->total_hdr_length += VLAN_HLEN;
 			first_desc->tcp_hdr_offset = VLAN_HLEN;
 			first_desc->ip_hdr_offset = VLAN_HLEN;
 			/* Only in case of TSO on vlan device */
 			flags |= FLAGS_VLAN_TAGGED;
+
+			/* Create a TSO vlan header template for firmware */
+
+			hwdesc = &tx_ring->desc_head[producer];
+			tx_ring->cmd_buf_arr[producer].skb = NULL;
+
+			copy_len = min((int)sizeof(struct cmd_desc_type0) -
+				offset, hdr_len + VLAN_HLEN);
+
+			vh = (struct vlan_ethhdr *)((char *) hwdesc + 2);
+			skb_copy_from_linear_data(skb, vh, 12);
+			vh->h_vlan_proto = htons(ETH_P_8021Q);
+			vh->h_vlan_TCI = htons(vlan_tci);
+
+			skb_copy_from_linear_data_offset(skb, 12,
+				(char *)vh + 16, copy_len - 16);
+
+			copied = copy_len - VLAN_HLEN;
+			offset = 0;
+
+			producer = get_next_index(producer, tx_ring->num_desc);
 		}
 
-		opcode = (protocol == cpu_to_be16(ETH_P_IPV6)) ?
-				TX_TCP_LSO6 : TX_TCP_LSO;
-		tso = 1;
+		while (copied < hdr_len) {
+
+			copy_len = min((int)sizeof(struct cmd_desc_type0) -
+				offset, (hdr_len - copied));
+
+			hwdesc = &tx_ring->desc_head[producer];
+			tx_ring->cmd_buf_arr[producer].skb = NULL;
+
+			skb_copy_from_linear_data_offset(skb, copied,
+				 (char *) hwdesc + offset, copy_len);
+
+			copied += copy_len;
+			offset = 0;
+
+			producer = get_next_index(producer, tx_ring->num_desc);
+		}
+
+		tx_ring->producer = producer;
+		smp_mb();
+		adapter->stats.lso_frames++;
 
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		u8 l4proto;
 
-		if (protocol == cpu_to_be16(ETH_P_IP)) {
+		if (protocol == ETH_P_IP) {
 			l4proto = ip_hdr(skb)->protocol;
 
 			if (l4proto == IPPROTO_TCP)
 				opcode = TX_TCP_PKT;
 			else if (l4proto == IPPROTO_UDP)
 				opcode = TX_UDP_PKT;
-		} else if (protocol == cpu_to_be16(ETH_P_IPV6)) {
+		} else if (protocol == ETH_P_IPV6) {
 			l4proto = ipv6_hdr(skb)->nexthdr;
 
 			if (l4proto == IPPROTO_TCP)
@@ -1939,63 +2089,11 @@ qlcnic_tso_check(struct net_device *netdev,
 				opcode = TX_UDPV6_PKT;
 		}
 	}
-
 	first_desc->tcp_hdr_offset += skb_transport_offset(skb);
 	first_desc->ip_hdr_offset += skb_network_offset(skb);
 	qlcnic_set_tx_flags_opcode(first_desc, flags, opcode);
 
-	if (!tso)
-		return;
-
-	/* For LSO, we need to copy the MAC/IP/TCP headers into
-	 * the descriptor ring
-	 */
-	copied = 0;
-	offset = 2;
-
-	if (vlan_oob) {
-		/* Create a TSO vlan header template for firmware */
-
-		hwdesc = &tx_ring->desc_head[producer];
-		tx_ring->cmd_buf_arr[producer].skb = NULL;
-
-		copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
-				hdr_len + VLAN_HLEN);
-
-		vh = (struct vlan_ethhdr *)((char *)hwdesc + 2);
-		skb_copy_from_linear_data(skb, vh, 12);
-		vh->h_vlan_proto = htons(ETH_P_8021Q);
-		vh->h_vlan_TCI = (__be16)swab16((u16)first_desc->vlan_TCI);
-
-		skb_copy_from_linear_data_offset(skb, 12,
-				(char *)vh + 16, copy_len - 16);
-
-		copied = copy_len - VLAN_HLEN;
-		offset = 0;
-
-		producer = get_next_index(producer, tx_ring->num_desc);
-	}
-
-	while (copied < hdr_len) {
-
-		copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
-				(hdr_len - copied));
-
-		hwdesc = &tx_ring->desc_head[producer];
-		tx_ring->cmd_buf_arr[producer].skb = NULL;
-
-		skb_copy_from_linear_data_offset(skb, copied,
-				 (char *)hwdesc + offset, copy_len);
-
-		copied += copy_len;
-		offset = 0;
-
-		producer = get_next_index(producer, tx_ring->num_desc);
-	}
-
-	tx_ring->producer = producer;
-	barrier();
-	adapter->stats.lso_frames++;
+	return 0;
 }
 
 static int
@@ -2046,39 +2144,21 @@ out_err:
 	return -ENOMEM;
 }
 
-static int
-qlcnic_check_tx_tagging(struct qlcnic_adapter *adapter,
-			struct sk_buff *skb,
-			struct cmd_desc_type0 *first_desc)
+static void
+qlcnic_unmap_buffers(struct pci_dev *pdev, struct sk_buff *skb,
+			struct qlcnic_cmd_buffer *pbuf)
 {
-	u8 opcode = 0;
-	u16 flags = 0;
-	__be16 protocol = skb->protocol;
-	struct vlan_ethhdr *vh;
+	struct qlcnic_skb_frag *nf = &pbuf->frag_array[0];
+	int nr_frags = skb_shinfo(skb)->nr_frags;
+	int i;
 
-	if (protocol == cpu_to_be16(ETH_P_8021Q)) {
-		vh = (struct vlan_ethhdr *)skb->data;
-		protocol = vh->h_vlan_encapsulated_proto;
-		flags = FLAGS_VLAN_TAGGED;
-		qlcnic_set_tx_vlan_tci(first_desc, ntohs(vh->h_vlan_TCI));
-	} else if (vlan_tx_tag_present(skb)) {
-		flags = FLAGS_VLAN_OOB;
-		qlcnic_set_tx_vlan_tci(first_desc, vlan_tx_tag_get(skb));
+	for (i = 0; i < nr_frags; i++) {
+		nf = &pbuf->frag_array[i+1];
+		pci_unmap_page(pdev, nf->dma, nf->length, PCI_DMA_TODEVICE);
 	}
-	if (unlikely(adapter->pvid)) {
-		if (first_desc->vlan_TCI &&
-				!(adapter->flags & QLCNIC_TAGGING_ENABLED))
-			return -EIO;
-		if (first_desc->vlan_TCI &&
-				(adapter->flags & QLCNIC_TAGGING_ENABLED))
-			goto set_flags;
 
-		flags = FLAGS_VLAN_OOB;
-		qlcnic_set_tx_vlan_tci(first_desc, adapter->pvid);
-	}
-set_flags:
-	qlcnic_set_tx_flags_opcode(first_desc, flags, opcode);
-	return 0;
+	nf = &pbuf->frag_array[0];
+	pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE);
 }
 
 static inline void
@@ -2099,10 +2179,11 @@ qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	struct cmd_desc_type0 *hwdesc, *first_desc;
 	struct pci_dev *pdev;
 	struct ethhdr *phdr;
+	int delta = 0;
 	int i, k;
 
 	u32 producer;
-	int frag_count, no_of_desc;
+	int frag_count;
 	u32 num_txd = tx_ring->num_desc;
 
 	if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
@@ -2118,13 +2199,22 @@ qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	}
 
 	frag_count = skb_shinfo(skb)->nr_frags + 1;
+	/* 14 frags supported for normal packet and
+	 * 32 frags supported for TSO packet
+	 */
+	if (!skb_is_gso(skb) && frag_count > QLCNIC_MAX_FRAGS_PER_TX) {
 
-	/* 4 fragments per cmd des */
-	no_of_desc = (frag_count + 3) >> 2;
+		for (i = 0; i < (frag_count - QLCNIC_MAX_FRAGS_PER_TX); i++)
+			delta += skb_shinfo(skb)->frags[i].size;
+
+		if (!__pskb_pull_tail(skb, delta))
+			goto drop_packet;
+
+		frag_count = 1 + skb_shinfo(skb)->nr_frags;
+	}
 
 	if (unlikely(qlcnic_tx_avail(tx_ring) <= TX_STOP_THRESH)) {
 		netif_stop_queue(netdev);
-		smp_mb();
 		if (qlcnic_tx_avail(tx_ring) > TX_STOP_THRESH)
 			netif_start_queue(netdev);
 		else {
@@ -2141,9 +2231,6 @@ qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	first_desc = hwdesc = &tx_ring->desc_head[producer];
 	qlcnic_clear_cmddesc((u64 *)hwdesc);
 
-	if (qlcnic_check_tx_tagging(adapter, skb, first_desc))
-		goto drop_packet;
-
 	if (qlcnic_map_tx_skb(pdev, skb, pbuf)) {
 		adapter->stats.tx_dma_map_error++;
 		goto drop_packet;
@@ -2187,8 +2274,10 @@ qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	}
 
 	tx_ring->producer = get_next_index(producer, num_txd);
+	smp_mb();
 
-	qlcnic_tso_check(netdev, tx_ring, first_desc, skb);
+	if (unlikely(qlcnic_tx_pkt(adapter, first_desc, skb)))
+		goto unwind_buff;
 
 	if (qlcnic_mac_learn)
 		qlcnic_send_filter(adapter, tx_ring, first_desc, skb);
@@ -2200,6 +2289,8 @@ qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	return NETDEV_TX_OK;
 
+unwind_buff:
+	qlcnic_unmap_buffers(pdev, skb, pbuf);
 drop_packet:
 	adapter->stats.txdropped++;
 	dev_kfree_skb_any(skb);
@@ -2246,16 +2337,16 @@ void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup)
 {
 	struct net_device *netdev = adapter->netdev;
 
-	if (adapter->ahw.linkup && !linkup) {
+	if (adapter->ahw->linkup && !linkup) {
 		netdev_info(netdev, "NIC Link is down\n");
-		adapter->ahw.linkup = 0;
+		adapter->ahw->linkup = 0;
 		if (netif_running(netdev)) {
 			netif_carrier_off(netdev);
 			netif_stop_queue(netdev);
 		}
-	} else if (!adapter->ahw.linkup && linkup) {
+	} else if (!adapter->ahw->linkup && linkup) {
 		netdev_info(netdev, "NIC Link is up\n");
-		adapter->ahw.linkup = 1;
+		adapter->ahw->linkup = 1;
 		if (netif_running(netdev)) {
 			netif_carrier_on(netdev);
 			netif_wake_queue(netdev);
@@ -2491,7 +2582,7 @@ static void qlcnic_poll_controller(struct net_device *netdev)
 	int ring;
 	struct qlcnic_host_sds_ring *sds_ring;
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
+	struct qlcnic_recv_context *recv_ctx = adapter->recv_ctx;
 
 	disable_irq(adapter->irq);
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
@@ -2742,6 +2833,8 @@ skip_ack_check:
 			set_bit(__QLCNIC_START_FW, &adapter->state);
 			QLCDB(adapter, DRV, "Restarting fw\n");
 			qlcnic_idc_debug_info(adapter, 0);
+			QLCDB(adapter, DRV, "Take FW dump\n");
+			qlcnic_dump_fw(adapter);
 		}
 
 		qlcnic_api_unlock(adapter);
@@ -2840,7 +2933,7 @@ qlcnic_set_npar_non_operational(struct qlcnic_adapter *adapter)
 }
 
 /*Transit to RESET state from READY state only */
-static void
+void
 qlcnic_dev_request_reset(struct qlcnic_adapter *adapter)
 {
 	u32 state;
@@ -3252,6 +3345,56 @@ static struct device_attribute dev_attr_diag_mode = {
 	.store = qlcnic_store_diag_mode,
 };
 
+int qlcnic_validate_max_rss(struct net_device *netdev, u8 max_hw, u8 val)
+{
+	if (!use_msi_x && !use_msi) {
+		netdev_info(netdev, "no msix or msi support, hence no rss\n");
+		return -EINVAL;
+	}
+
+	if ((val > max_hw) || (val <  2) || !is_power_of_2(val)) {
+		netdev_info(netdev, "rss_ring valid range [2 - %x] in "
+			" powers of 2\n", max_hw);
+		return -EINVAL;
+	}
+	return 0;
+
+}
+
+int qlcnic_set_max_rss(struct qlcnic_adapter *adapter, u8 data)
+{
+	struct net_device *netdev = adapter->netdev;
+	int err = 0;
+
+	if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+		return -EBUSY;
+
+	netif_device_detach(netdev);
+	if (netif_running(netdev))
+		__qlcnic_down(adapter, netdev);
+	qlcnic_detach(adapter);
+	qlcnic_teardown_intr(adapter);
+
+	if (qlcnic_enable_msix(adapter, data)) {
+		netdev_info(netdev, "failed setting max_rss; rss disabled\n");
+		qlcnic_enable_msi_legacy(adapter);
+	}
+
+	if (netif_running(netdev)) {
+		err = qlcnic_attach(adapter);
+		if (err)
+			goto done;
+		err = __qlcnic_up(adapter, netdev);
+		if (err)
+			goto done;
+		qlcnic_restore_indev_addr(netdev, NETDEV_UP);
+	}
+ done:
+	netif_device_attach(netdev);
+	clear_bit(__QLCNIC_RESETTING, &adapter->state);
+	return err;
+}
+
 static int
 qlcnic_sysfs_validate_crb(struct qlcnic_adapter *adapter,
 		loff_t offset, size_t size)
@@ -3382,7 +3525,6 @@ qlcnic_sysfs_write_mem(struct file *filp, struct kobject *kobj,
 	return size;
 }
 
-
 static struct bin_attribute bin_attr_crb = {
 	.attr = {.name = "crb", .mode = (S_IRUGO | S_IWUSR)},
 	.size = 0,
@@ -3501,7 +3643,7 @@ validate_esw_config(struct qlcnic_adapter *adapter,
 	u8 pci_func;
 	int i;
 
-	op_mode = readl(adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE);
+	op_mode = readl(adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE);
 
 	for (i = 0; i < count; i++) {
 		pci_func = esw_cfg[i].pci_func;
@@ -3567,13 +3709,13 @@ qlcnic_sysfs_write_esw_config(struct file *file, struct kobject *kobj,
 			if (qlcnic_config_switch_port(adapter, &esw_cfg[i]))
 				return QL_STATUS_INVALID_PARAM;
 
-		if (adapter->ahw.pci_func != esw_cfg[i].pci_func)
+		if (adapter->ahw->pci_func != esw_cfg[i].pci_func)
 			continue;
 
 		op_mode = esw_cfg[i].op_mode;
 		qlcnic_get_eswitch_port_config(adapter, &esw_cfg[i]);
 		esw_cfg[i].op_mode = op_mode;
-		esw_cfg[i].pci_func = adapter->ahw.pci_func;
+		esw_cfg[i].pci_func = adapter->ahw->pci_func;
 
 		switch (esw_cfg[i].op_mode) {
 		case QLCNIC_PORT_DEFAULTS:
@@ -3954,14 +4096,14 @@ qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
 		dev_info(dev, "failed to create crb sysfs entry\n");
 	if (device_create_bin_file(dev, &bin_attr_mem))
 		dev_info(dev, "failed to create mem sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_pci_config))
+		dev_info(dev, "failed to create pci config sysfs entry");
 	if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
 		return;
 	if (device_create_bin_file(dev, &bin_attr_esw_config))
 		dev_info(dev, "failed to create esw config sysfs entry");
 	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
 		return;
-	if (device_create_bin_file(dev, &bin_attr_pci_config))
-		dev_info(dev, "failed to create pci config sysfs entry");
 	if (device_create_bin_file(dev, &bin_attr_npar_config))
 		dev_info(dev, "failed to create npar config sysfs entry");
 	if (device_create_bin_file(dev, &bin_attr_pm_config))
@@ -3982,12 +4124,12 @@ qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter)
 	device_remove_file(dev, &dev_attr_diag_mode);
 	device_remove_bin_file(dev, &bin_attr_crb);
 	device_remove_bin_file(dev, &bin_attr_mem);
+	device_remove_bin_file(dev, &bin_attr_pci_config);
 	if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
 		return;
 	device_remove_bin_file(dev, &bin_attr_esw_config);
 	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
 		return;
-	device_remove_bin_file(dev, &bin_attr_pci_config);
 	device_remove_bin_file(dev, &bin_attr_npar_config);
 	device_remove_bin_file(dev, &bin_attr_pm_config);
 	device_remove_bin_file(dev, &bin_attr_esw_stats);
@@ -4034,14 +4176,10 @@ qlcnic_restore_indev_addr(struct net_device *netdev, unsigned long event)
 
 	qlcnic_config_indev_addr(adapter, netdev, event);
 
-	if (!adapter->vlgrp)
-		return;
-
-	for (vid = 0; vid < VLAN_N_VID; vid++) {
-		dev = vlan_group_get_device(adapter->vlgrp, vid);
+	for_each_set_bit(vid, adapter->vlans, VLAN_N_VID) {
+		dev = vlan_find_dev(netdev, vid);
 		if (!dev)
 			continue;
-
 		qlcnic_config_indev_addr(adapter, dev, event);
 	}
 }
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 4757c59a07a..d32850715f5 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2134,7 +2134,7 @@ struct ql_adapter {
 	struct delayed_work mpi_idc_work;
 	struct delayed_work mpi_core_to_log;
 	struct completion ide_completion;
-	struct nic_operations *nic_ops;
+	const struct nic_operations *nic_ops;
 	u16 device_id;
 	struct timer_list timer;
 	atomic_t lb_count;
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 8149cc9de4c..19b00fa0eaf 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -356,7 +356,7 @@ static int ql_get_settings(struct net_device *ndev,
 		ecmd->port = PORT_FIBRE;
 	}
 
-	ecmd->speed = SPEED_10000;
+	ethtool_cmd_speed_set(ecmd, SPEED_10000);
 	ecmd->duplex = DUPLEX_FULL;
 
 	return 0;
@@ -412,31 +412,31 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
-static int ql_phys_id(struct net_device *ndev, u32 data)
+static int ql_set_phys_id(struct net_device *ndev,
+			  enum ethtool_phys_id_state state)
+
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
-	u32 led_reg, i;
-	int status;
-
-	/* Save the current LED settings */
-	status = ql_mb_get_led_cfg(qdev);
-	if (status)
-		return status;
-	led_reg = qdev->led_config;
 
-	/* Start blinking the led */
-	if (!data || data > 300)
-		data = 300;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		/* Save the current LED settings */
+		if (ql_mb_get_led_cfg(qdev))
+			return -EIO;
 
-	for (i = 0; i < (data * 10); i++)
+		/* Start blinking */
 		ql_mb_set_led_cfg(qdev, QL_LED_BLINK);
+		return 0;
 
-	/* Restore LED settings */
-	status = ql_mb_set_led_cfg(qdev, led_reg);
-	if (status)
-		return status;
+	case ETHTOOL_ID_INACTIVE:
+		/* Restore LED settings */
+		if (ql_mb_set_led_cfg(qdev, qdev->led_config))
+			return -EIO;
+		return 0;
 
-	return 0;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int ql_start_loopback(struct ql_adapter *qdev)
@@ -655,32 +655,6 @@ static int ql_set_pauseparam(struct net_device *netdev,
 	return status;
 }
 
-static u32 ql_get_rx_csum(struct net_device *netdev)
-{
-	struct ql_adapter *qdev = netdev_priv(netdev);
-	return qdev->rx_csum;
-}
-
-static int ql_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
-	struct ql_adapter *qdev = netdev_priv(netdev);
-	qdev->rx_csum = data;
-	return 0;
-}
-
-static int ql_set_tso(struct net_device *ndev, uint32_t data)
-{
-
-	if (data) {
-		ndev->features |= NETIF_F_TSO;
-		ndev->features |= NETIF_F_TSO6;
-	} else {
-		ndev->features &= ~NETIF_F_TSO;
-		ndev->features &= ~NETIF_F_TSO6;
-	}
-	return 0;
-}
-
 static u32 ql_get_msglevel(struct net_device *ndev)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
@@ -703,18 +677,10 @@ const struct ethtool_ops qlge_ethtool_ops = {
 	.get_msglevel = ql_get_msglevel,
 	.set_msglevel = ql_set_msglevel,
 	.get_link = ethtool_op_get_link,
-	.phys_id		 = ql_phys_id,
+	.set_phys_id		 = ql_set_phys_id,
 	.self_test		 = ql_self_test,
 	.get_pauseparam		 = ql_get_pauseparam,
 	.set_pauseparam		 = ql_set_pauseparam,
-	.get_rx_csum = ql_get_rx_csum,
-	.set_rx_csum = ql_set_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_csum,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = ql_set_tso,
 	.get_coalesce = ql_get_coalesce,
 	.set_coalesce = ql_set_coalesce,
 	.get_sset_count = ql_get_sset_count,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 49bfa581306..6c9d124cfc7 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -660,7 +660,7 @@ static void ql_disable_interrupts(struct ql_adapter *qdev)
 /* If we're running with multiple MSI-X vectors then we enable on the fly.
  * Otherwise, we may have multiple outstanding workers and don't want to
  * enable until the last one finishes. In this case, the irq_cnt gets
- * incremented everytime we queue a worker and decremented everytime
+ * incremented every time we queue a worker and decremented every time
  * a worker finishes.  Once it hits zero we enable the interrupt.
  */
 u32 ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
@@ -1571,7 +1571,7 @@ static void ql_process_mac_rx_page(struct ql_adapter *qdev,
 	skb->protocol = eth_type_trans(skb, ndev);
 	skb_checksum_none_assert(skb);
 
-	if (qdev->rx_csum &&
+	if ((ndev->features & NETIF_F_RXCSUM) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -1684,7 +1684,7 @@ static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
 	/* If rx checksum is on, and there are no
 	 * csum or frame errors.
 	 */
-	if (qdev->rx_csum &&
+	if ((ndev->features & NETIF_F_RXCSUM) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -2004,7 +2004,7 @@ static void ql_process_mac_split_rx_intr(struct ql_adapter *qdev,
 	/* If rx checksum is on, and there are no
 	 * csum or frame errors.
 	 */
-	if (qdev->rx_csum &&
+	if ((ndev->features & NETIF_F_RXCSUM) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -3299,7 +3299,7 @@ msi:
  * will service it.  An example would be if there are
  * 2 vectors (so 2 RSS rings) and 8 TX completion rings.
  * This would mean that vector 0 would service RSS ring 0
- * and TX competion rings 0,1,2 and 3.  Vector 1 would
+ * and TX completion rings 0,1,2 and 3.  Vector 1 would
  * service RSS ring 1 and TX completion rings 4,5,6 and 7.
  */
 static void ql_set_tx_vect(struct ql_adapter *qdev)
@@ -4152,7 +4152,7 @@ static int ql_change_rx_buffers(struct ql_adapter *qdev)
 	int i, status;
 	u32 lbq_buf_len;
 
-	/* Wait for an oustanding reset to complete. */
+	/* Wait for an outstanding reset to complete. */
 	if (!test_bit(QL_ADAPTER_UP, &qdev->flags)) {
 		int i = 3;
 		while (i-- && !test_bit(QL_ADAPTER_UP, &qdev->flags)) {
@@ -4281,7 +4281,7 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 			if (ql_set_routing_reg
 			    (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) {
 				netif_err(qdev, hw, qdev->ndev,
-					  "Failed to set promiscous mode.\n");
+					  "Failed to set promiscuous mode.\n");
 			} else {
 				set_bit(QL_PROMISCUOUS, &qdev->flags);
 			}
@@ -4291,7 +4291,7 @@ static void qlge_set_multicast_list(struct net_device *ndev)
 			if (ql_set_routing_reg
 			    (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) {
 				netif_err(qdev, hw, qdev->ndev,
-					  "Failed to clear promiscous mode.\n");
+					  "Failed to clear promiscuous mode.\n");
 			} else {
 				clear_bit(QL_PROMISCUOUS, &qdev->flags);
 			}
@@ -4412,12 +4412,12 @@ error:
 	rtnl_unlock();
 }
 
-static struct nic_operations qla8012_nic_ops = {
+static const struct nic_operations qla8012_nic_ops = {
 	.get_flash		= ql_get_8012_flash_params,
 	.port_initialize	= ql_8012_port_initialize,
 };
 
-static struct nic_operations qla8000_nic_ops = {
+static const struct nic_operations qla8000_nic_ops = {
 	.get_flash		= ql_get_8000_flash_params,
 	.port_initialize	= ql_8000_port_initialize,
 };
@@ -4621,7 +4621,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	/*
 	 * Set up the operating parameters.
 	 */
-	qdev->rx_csum = 1;
 	qdev->workqueue = create_singlethread_workqueue(ndev->name);
 	INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work);
 	INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work);
@@ -4695,15 +4694,11 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
 
 	qdev = netdev_priv(ndev);
 	SET_NETDEV_DEV(ndev, &pdev->dev);
-	ndev->features = (0
-			  | NETIF_F_IP_CSUM
-			  | NETIF_F_SG
-			  | NETIF_F_TSO
-			  | NETIF_F_TSO6
-			  | NETIF_F_TSO_ECN
-			  | NETIF_F_HW_VLAN_TX
-			  | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER);
-	ndev->features |= NETIF_F_GRO;
+	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN |
+		NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
+	ndev->features = ndev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
 
 	if (test_bit(QL_DMA64, &qdev->flags))
 		ndev->features |= NETIF_F_HIGHDMA;
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index e3ebd90ae65..200a363c3bf 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -535,7 +535,7 @@ static int r6040_rx(struct net_device *dev, int limit)
 			/* RX dribble */
 			if (err & DSC_RX_ERR_DRI)
 				dev->stats.rx_frame_errors++;
-			/* Buffer lenght exceeded */
+			/* Buffer length exceeded */
 			if (err & DSC_RX_ERR_BUF)
 				dev->stats.rx_length_errors++;
 			/* Packet too long */
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 493b0de3848..04f4e6086cd 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -37,6 +37,8 @@
 
 #define FIRMWARE_8168D_1	"rtl_nic/rtl8168d-1.fw"
 #define FIRMWARE_8168D_2	"rtl_nic/rtl8168d-2.fw"
+#define FIRMWARE_8168E_1	"rtl_nic/rtl8168e-1.fw"
+#define FIRMWARE_8168E_2	"rtl_nic/rtl8168e-2.fw"
 #define FIRMWARE_8105E_1	"rtl_nic/rtl8105e-1.fw"
 
 #ifdef RTL8169_DEBUG
@@ -96,77 +98,123 @@ static const int multicast_filter_limit = 32;
 #define RTL_R32(reg)		readl (ioaddr + (reg))
 
 enum mac_version {
-	RTL_GIGA_MAC_NONE   = 0x00,
-	RTL_GIGA_MAC_VER_01 = 0x01, // 8169
-	RTL_GIGA_MAC_VER_02 = 0x02, // 8169S
-	RTL_GIGA_MAC_VER_03 = 0x03, // 8110S
-	RTL_GIGA_MAC_VER_04 = 0x04, // 8169SB
-	RTL_GIGA_MAC_VER_05 = 0x05, // 8110SCd
-	RTL_GIGA_MAC_VER_06 = 0x06, // 8110SCe
-	RTL_GIGA_MAC_VER_07 = 0x07, // 8102e
-	RTL_GIGA_MAC_VER_08 = 0x08, // 8102e
-	RTL_GIGA_MAC_VER_09 = 0x09, // 8102e
-	RTL_GIGA_MAC_VER_10 = 0x0a, // 8101e
-	RTL_GIGA_MAC_VER_11 = 0x0b, // 8168Bb
-	RTL_GIGA_MAC_VER_12 = 0x0c, // 8168Be
-	RTL_GIGA_MAC_VER_13 = 0x0d, // 8101Eb
-	RTL_GIGA_MAC_VER_14 = 0x0e, // 8101 ?
-	RTL_GIGA_MAC_VER_15 = 0x0f, // 8101 ?
-	RTL_GIGA_MAC_VER_16 = 0x11, // 8101Ec
-	RTL_GIGA_MAC_VER_17 = 0x10, // 8168Bf
-	RTL_GIGA_MAC_VER_18 = 0x12, // 8168CP
-	RTL_GIGA_MAC_VER_19 = 0x13, // 8168C
-	RTL_GIGA_MAC_VER_20 = 0x14, // 8168C
-	RTL_GIGA_MAC_VER_21 = 0x15, // 8168C
-	RTL_GIGA_MAC_VER_22 = 0x16, // 8168C
-	RTL_GIGA_MAC_VER_23 = 0x17, // 8168CP
-	RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP
-	RTL_GIGA_MAC_VER_25 = 0x19, // 8168D
-	RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D
-	RTL_GIGA_MAC_VER_27 = 0x1b, // 8168DP
-	RTL_GIGA_MAC_VER_28 = 0x1c, // 8168DP
-	RTL_GIGA_MAC_VER_29 = 0x1d, // 8105E
-	RTL_GIGA_MAC_VER_30 = 0x1e, // 8105E
+	RTL_GIGA_MAC_VER_01 = 0,
+	RTL_GIGA_MAC_VER_02,
+	RTL_GIGA_MAC_VER_03,
+	RTL_GIGA_MAC_VER_04,
+	RTL_GIGA_MAC_VER_05,
+	RTL_GIGA_MAC_VER_06,
+	RTL_GIGA_MAC_VER_07,
+	RTL_GIGA_MAC_VER_08,
+	RTL_GIGA_MAC_VER_09,
+	RTL_GIGA_MAC_VER_10,
+	RTL_GIGA_MAC_VER_11,
+	RTL_GIGA_MAC_VER_12,
+	RTL_GIGA_MAC_VER_13,
+	RTL_GIGA_MAC_VER_14,
+	RTL_GIGA_MAC_VER_15,
+	RTL_GIGA_MAC_VER_16,
+	RTL_GIGA_MAC_VER_17,
+	RTL_GIGA_MAC_VER_18,
+	RTL_GIGA_MAC_VER_19,
+	RTL_GIGA_MAC_VER_20,
+	RTL_GIGA_MAC_VER_21,
+	RTL_GIGA_MAC_VER_22,
+	RTL_GIGA_MAC_VER_23,
+	RTL_GIGA_MAC_VER_24,
+	RTL_GIGA_MAC_VER_25,
+	RTL_GIGA_MAC_VER_26,
+	RTL_GIGA_MAC_VER_27,
+	RTL_GIGA_MAC_VER_28,
+	RTL_GIGA_MAC_VER_29,
+	RTL_GIGA_MAC_VER_30,
+	RTL_GIGA_MAC_VER_31,
+	RTL_GIGA_MAC_VER_32,
+	RTL_GIGA_MAC_VER_33,
+	RTL_GIGA_MAC_NONE   = 0xff,
 };
 
-#define _R(NAME,MAC,MASK) \
-	{ .name = NAME, .mac_version = MAC, .RxConfigMask = MASK }
+enum rtl_tx_desc_version {
+	RTL_TD_0	= 0,
+	RTL_TD_1	= 1,
+};
+
+#define _R(NAME,TD,FW) \
+	{ .name = NAME, .txd_version = TD, .fw_name = FW }
 
 static const struct {
 	const char *name;
-	u8 mac_version;
-	u32 RxConfigMask;	/* Clears the bits supported by this chip */
-} rtl_chip_info[] = {
-	_R("RTL8169",		RTL_GIGA_MAC_VER_01, 0xff7e1880), // 8169
-	_R("RTL8169s",		RTL_GIGA_MAC_VER_02, 0xff7e1880), // 8169S
-	_R("RTL8110s",		RTL_GIGA_MAC_VER_03, 0xff7e1880), // 8110S
-	_R("RTL8169sb/8110sb",	RTL_GIGA_MAC_VER_04, 0xff7e1880), // 8169SB
-	_R("RTL8169sc/8110sc",	RTL_GIGA_MAC_VER_05, 0xff7e1880), // 8110SCd
-	_R("RTL8169sc/8110sc",	RTL_GIGA_MAC_VER_06, 0xff7e1880), // 8110SCe
-	_R("RTL8102e",		RTL_GIGA_MAC_VER_07, 0xff7e1880), // PCI-E
-	_R("RTL8102e",		RTL_GIGA_MAC_VER_08, 0xff7e1880), // PCI-E
-	_R("RTL8102e",		RTL_GIGA_MAC_VER_09, 0xff7e1880), // PCI-E
-	_R("RTL8101e",		RTL_GIGA_MAC_VER_10, 0xff7e1880), // PCI-E
-	_R("RTL8168b/8111b",	RTL_GIGA_MAC_VER_11, 0xff7e1880), // PCI-E
-	_R("RTL8168b/8111b",	RTL_GIGA_MAC_VER_12, 0xff7e1880), // PCI-E
-	_R("RTL8101e",		RTL_GIGA_MAC_VER_13, 0xff7e1880), // PCI-E 8139
-	_R("RTL8100e",		RTL_GIGA_MAC_VER_14, 0xff7e1880), // PCI-E 8139
-	_R("RTL8100e",		RTL_GIGA_MAC_VER_15, 0xff7e1880), // PCI-E 8139
-	_R("RTL8168b/8111b",	RTL_GIGA_MAC_VER_17, 0xff7e1880), // PCI-E
-	_R("RTL8101e",		RTL_GIGA_MAC_VER_16, 0xff7e1880), // PCI-E
-	_R("RTL8168cp/8111cp",	RTL_GIGA_MAC_VER_18, 0xff7e1880), // PCI-E
-	_R("RTL8168c/8111c",	RTL_GIGA_MAC_VER_19, 0xff7e1880), // PCI-E
-	_R("RTL8168c/8111c",	RTL_GIGA_MAC_VER_20, 0xff7e1880), // PCI-E
-	_R("RTL8168c/8111c",	RTL_GIGA_MAC_VER_21, 0xff7e1880), // PCI-E
-	_R("RTL8168c/8111c",	RTL_GIGA_MAC_VER_22, 0xff7e1880), // PCI-E
-	_R("RTL8168cp/8111cp",	RTL_GIGA_MAC_VER_23, 0xff7e1880), // PCI-E
-	_R("RTL8168cp/8111cp",	RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E
-	_R("RTL8168d/8111d",	RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E
-	_R("RTL8168d/8111d",	RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E
-	_R("RTL8168dp/8111dp",	RTL_GIGA_MAC_VER_27, 0xff7e1880), // PCI-E
-	_R("RTL8168dp/8111dp",	RTL_GIGA_MAC_VER_28, 0xff7e1880), // PCI-E
-	_R("RTL8105e",		RTL_GIGA_MAC_VER_29, 0xff7e1880), // PCI-E
-	_R("RTL8105e",		RTL_GIGA_MAC_VER_30, 0xff7e1880)  // PCI-E
+	enum rtl_tx_desc_version txd_version;
+	const char *fw_name;
+} rtl_chip_infos[] = {
+	/* PCI devices. */
+	[RTL_GIGA_MAC_VER_01] =
+		_R("RTL8169",		RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_02] =
+		_R("RTL8169s",		RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_03] =
+		_R("RTL8110s",		RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_04] =
+		_R("RTL8169sb/8110sb",	RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_05] =
+		_R("RTL8169sc/8110sc",	RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_06] =
+		_R("RTL8169sc/8110sc",	RTL_TD_0, NULL),
+	/* PCI-E devices. */
+	[RTL_GIGA_MAC_VER_07] =
+		_R("RTL8102e",		RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_08] =
+		_R("RTL8102e",		RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_09] =
+		_R("RTL8102e",		RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_10] =
+		_R("RTL8101e",		RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_11] =
+		_R("RTL8168b/8111b",	RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_12] =
+		_R("RTL8168b/8111b",	RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_13] =
+		_R("RTL8101e",		RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_14] =
+		_R("RTL8100e",		RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_15] =
+		_R("RTL8100e",		RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_16] =
+		_R("RTL8101e",		RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_17] =
+		_R("RTL8168b/8111b",	RTL_TD_0, NULL),
+	[RTL_GIGA_MAC_VER_18] =
+		_R("RTL8168cp/8111cp",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_19] =
+		_R("RTL8168c/8111c",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_20] =
+		_R("RTL8168c/8111c",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_21] =
+		_R("RTL8168c/8111c",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_22] =
+		_R("RTL8168c/8111c",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_23] =
+		_R("RTL8168cp/8111cp",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_24] =
+		_R("RTL8168cp/8111cp",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_25] =
+		_R("RTL8168d/8111d",	RTL_TD_1, FIRMWARE_8168D_1),
+	[RTL_GIGA_MAC_VER_26] =
+		_R("RTL8168d/8111d",	RTL_TD_1, FIRMWARE_8168D_2),
+	[RTL_GIGA_MAC_VER_27] =
+		_R("RTL8168dp/8111dp",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_28] =
+		_R("RTL8168dp/8111dp",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_29] =
+		_R("RTL8105e",		RTL_TD_1, FIRMWARE_8105E_1),
+	[RTL_GIGA_MAC_VER_30] =
+		_R("RTL8105e",		RTL_TD_1, FIRMWARE_8105E_1),
+	[RTL_GIGA_MAC_VER_31] =
+		_R("RTL8168dp/8111dp",	RTL_TD_1, NULL),
+	[RTL_GIGA_MAC_VER_32] =
+		_R("RTL8168e/8111e",	RTL_TD_1, FIRMWARE_8168E_1),
+	[RTL_GIGA_MAC_VER_33] =
+		_R("RTL8168e/8111e",	RTL_TD_1, FIRMWARE_8168E_2)
 };
 #undef _R
 
@@ -222,6 +270,9 @@ enum rtl_registers {
 	IntrStatus	= 0x3e,
 	TxConfig	= 0x40,
 	RxConfig	= 0x44,
+
+#define RTL_RX_CONFIG_MASK		0xff7e1880u
+
 	RxMissed	= 0x4c,
 	Cfg9346		= 0x50,
 	Config0		= 0x51,
@@ -315,7 +366,9 @@ enum rtl8168_registers {
 #define OCPAR_FLAG			0x80000000
 #define OCPAR_GPHY_WRITE_CMD		0x8000f060
 #define OCPAR_GPHY_READ_CMD		0x0000f060
-	RDSAR1			= 0xd0	/* 8168c only. Undocumented on 8168dp */
+	RDSAR1			= 0xd0,	/* 8168c only. Undocumented on 8168dp */
+	MISC			= 0xf0,	/* 8168e only. */
+#define TXPLA_RST			(1 << 29)
 };
 
 enum rtl_register_content {
@@ -393,6 +446,7 @@ enum rtl_register_content {
 	BWF		= (1 << 6),	/* Accept Broadcast wakeup frame */
 	MWF		= (1 << 5),	/* Accept Multicast wakeup frame */
 	UWF		= (1 << 4),	/* Accept Unicast wakeup frame */
+	Spi_en		= (1 << 3),
 	LanWake		= (1 << 1),	/* LanWake enable/disable */
 	PMEStatus	= (1 << 0),	/* PME status can be reset by PCI RST# */
 
@@ -441,21 +495,69 @@ enum rtl_register_content {
 	CounterDump	= 0x8,
 };
 
-enum desc_status_bit {
+enum rtl_desc_bit {
+	/* First doubleword. */
 	DescOwn		= (1 << 31), /* Descriptor is owned by NIC */
 	RingEnd		= (1 << 30), /* End of descriptor ring */
 	FirstFrag	= (1 << 29), /* First segment of a packet */
 	LastFrag	= (1 << 28), /* Final segment of a packet */
+};
+
+/* Generic case. */
+enum rtl_tx_desc_bit {
+	/* First doubleword. */
+	TD_LSO		= (1 << 27),		/* Large Send Offload */
+#define TD_MSS_MAX			0x07ffu	/* MSS value */
+
+	/* Second doubleword. */
+	TxVlanTag	= (1 << 17),		/* Add VLAN tag */
+};
+
+/* 8169, 8168b and 810x except 8102e. */
+enum rtl_tx_desc_bit_0 {
+	/* First doubleword. */
+#define TD0_MSS_SHIFT			16	/* MSS position (11 bits) */
+	TD0_TCP_CS	= (1 << 16),		/* Calculate TCP/IP checksum */
+	TD0_UDP_CS	= (1 << 17),		/* Calculate UDP/IP checksum */
+	TD0_IP_CS	= (1 << 18),		/* Calculate IP checksum */
+};
 
-	/* Tx private */
-	LargeSend	= (1 << 27), /* TCP Large Send Offload (TSO) */
-	MSSShift	= 16,        /* MSS value position */
-	MSSMask		= 0xfff,     /* MSS value + LargeSend bit: 12 bits */
-	IPCS		= (1 << 18), /* Calculate IP checksum */
-	UDPCS		= (1 << 17), /* Calculate UDP/IP checksum */
-	TCPCS		= (1 << 16), /* Calculate TCP/IP checksum */
-	TxVlanTag	= (1 << 17), /* Add VLAN tag */
+/* 8102e, 8168c and beyond. */
+enum rtl_tx_desc_bit_1 {
+	/* Second doubleword. */
+#define TD1_MSS_SHIFT			18	/* MSS position (11 bits) */
+	TD1_IP_CS	= (1 << 29),		/* Calculate IP checksum */
+	TD1_TCP_CS	= (1 << 30),		/* Calculate TCP/IP checksum */
+	TD1_UDP_CS	= (1 << 31),		/* Calculate UDP/IP checksum */
+};
+
+static const struct rtl_tx_desc_info {
+	struct {
+		u32 udp;
+		u32 tcp;
+	} checksum;
+	u16 mss_shift;
+	u16 opts_offset;
+} tx_desc_info [] = {
+	[RTL_TD_0] = {
+		.checksum = {
+			.udp	= TD0_IP_CS | TD0_UDP_CS,
+			.tcp	= TD0_IP_CS | TD0_TCP_CS
+		},
+		.mss_shift	= TD0_MSS_SHIFT,
+		.opts_offset	= 0
+	},
+	[RTL_TD_1] = {
+		.checksum = {
+			.udp	= TD1_IP_CS | TD1_UDP_CS,
+			.tcp	= TD1_IP_CS | TD1_TCP_CS
+		},
+		.mss_shift	= TD1_MSS_SHIFT,
+		.opts_offset	= 1
+	}
+};
 
+enum rtl_rx_desc_bit {
 	/* Rx private */
 	PID1		= (1 << 18), /* Protocol ID bit 1/2 */
 	PID0		= (1 << 17), /* Protocol ID bit 2/2 */
@@ -515,13 +617,13 @@ struct rtl8169_counters {
 
 struct rtl8169_private {
 	void __iomem *mmio_addr;	/* memory map physical address */
-	struct pci_dev *pci_dev;	/* Index of PCI device */
+	struct pci_dev *pci_dev;
 	struct net_device *dev;
 	struct napi_struct napi;
-	spinlock_t lock;		/* spin lock flag */
+	spinlock_t lock;
 	u32 msg_enable;
-	int chipset;
-	int mac_version;
+	u16 txd_version;
+	u16 mac_version;
 	u32 cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
 	u32 cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
 	u32 dirty_rx;
@@ -537,7 +639,6 @@ struct rtl8169_private {
 	u16 intr_event;
 	u16 napi_event;
 	u16 intr_mask;
-	int phy_1000_ctrl_reg;
 
 	struct mdio_ops {
 		void (*write)(void __iomem *, int, int);
@@ -565,6 +666,7 @@ struct rtl8169_private {
 	u32 saved_wolopts;
 
 	const struct firmware *fw;
+#define RTL_FIRMWARE_UNKNOWN	ERR_PTR(-EAGAIN);
 };
 
 MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@@ -577,6 +679,8 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(RTL8169_VERSION);
 MODULE_FIRMWARE(FIRMWARE_8168D_1);
 MODULE_FIRMWARE(FIRMWARE_8168D_2);
+MODULE_FIRMWARE(FIRMWARE_8168E_1);
+MODULE_FIRMWARE(FIRMWARE_8168E_2);
 MODULE_FIRMWARE(FIRMWARE_8105E_1);
 
 static int rtl8169_open(struct net_device *dev);
@@ -648,32 +752,49 @@ static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd)
 #define OOB_CMD_DRIVER_START	0x05
 #define OOB_CMD_DRIVER_STOP	0x06
 
+static u16 rtl8168_get_ocp_reg(struct rtl8169_private *tp)
+{
+	return (tp->mac_version == RTL_GIGA_MAC_VER_31) ? 0xb8 : 0x10;
+}
+
 static void rtl8168_driver_start(struct rtl8169_private *tp)
 {
+	u16 reg;
 	int i;
 
 	rtl8168_oob_notify(tp, OOB_CMD_DRIVER_START);
 
+	reg = rtl8168_get_ocp_reg(tp);
+
 	for (i = 0; i < 10; i++) {
 		msleep(10);
-		if (ocp_read(tp, 0x0f, 0x0010) & 0x00000800)
+		if (ocp_read(tp, 0x0f, reg) & 0x00000800)
 			break;
 	}
 }
 
 static void rtl8168_driver_stop(struct rtl8169_private *tp)
 {
+	u16 reg;
 	int i;
 
 	rtl8168_oob_notify(tp, OOB_CMD_DRIVER_STOP);
 
+	reg = rtl8168_get_ocp_reg(tp);
+
 	for (i = 0; i < 10; i++) {
 		msleep(10);
-		if ((ocp_read(tp, 0x0f, 0x0010) & 0x00000800) == 0)
+		if ((ocp_read(tp, 0x0f, reg) & 0x00000800) == 0)
 			break;
 	}
 }
 
+static int r8168dp_check_dash(struct rtl8169_private *tp)
+{
+	u16 reg = rtl8168_get_ocp_reg(tp);
+
+	return (ocp_read(tp, 0x0f, reg) & 0x00008000) ? 1 : 0;
+}
 
 static void r8169_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
 {
@@ -972,9 +1093,8 @@ static void rtl8169_xmii_reset_enable(struct rtl8169_private *tp)
 }
 
 static void __rtl8169_check_link_status(struct net_device *dev,
-				      struct rtl8169_private *tp,
-				      void __iomem *ioaddr,
-				      bool pm)
+					struct rtl8169_private *tp,
+					void __iomem *ioaddr, bool pm)
 {
 	unsigned long flags;
 
@@ -1091,6 +1211,11 @@ static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
+static const char *rtl_lookup_firmware_name(struct rtl8169_private *tp)
+{
+	return rtl_chip_infos[tp->mac_version].fw_name;
+}
+
 static void rtl8169_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
@@ -1099,6 +1224,8 @@ static void rtl8169_get_drvinfo(struct net_device *dev,
 	strcpy(info->driver, MODULENAME);
 	strcpy(info->version, RTL8169_VERSION);
 	strcpy(info->bus_info, pci_name(tp->pci_dev));
+	strncpy(info->fw_version, IS_ERR_OR_NULL(tp->fw) ? "N/A" :
+		rtl_lookup_firmware_name(tp), sizeof(info->fw_version) - 1);
 }
 
 static int rtl8169_get_regs_len(struct net_device *dev)
@@ -1160,16 +1287,7 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 		giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 
 		/* The 8100e/8101e/8102e do Fast Ethernet only. */
-		if ((tp->mac_version != RTL_GIGA_MAC_VER_07) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_08) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_09) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_10) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_13) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_14) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_15) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_16) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_29) &&
-		    (tp->mac_version != RTL_GIGA_MAC_VER_30)) {
+		if (tp->mii.supports_gmii) {
 			if (adv & ADVERTISED_1000baseT_Half)
 				giga_ctrl |= ADVERTISE_1000HALF;
 			if (adv & ADVERTISED_1000baseT_Full)
@@ -1199,12 +1317,10 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 			bmcr |= BMCR_FULLDPLX;
 	}
 
-	tp->phy_1000_ctrl_reg = giga_ctrl;
-
 	rtl_writephy(tp, MII_BMCR, bmcr);
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+	if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_03) {
 		if ((speed == SPEED_100) && (autoneg != AUTONEG_ENABLE)) {
 			rtl_writephy(tp, 0x17, 0x2138);
 			rtl_writephy(tp, 0x0e, 0x0260);
@@ -1226,10 +1342,14 @@ static int rtl8169_set_speed(struct net_device *dev,
 	int ret;
 
 	ret = tp->set_speed(dev, autoneg, speed, duplex, advertising);
+	if (ret < 0)
+		goto out;
 
-	if (netif_running(dev) && (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
+	if (netif_running(dev) && (autoneg == AUTONEG_ENABLE) &&
+	    (advertising & ADVERTISED_1000baseT_Full)) {
 		mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
-
+	}
+out:
 	return ret;
 }
 
@@ -1239,22 +1359,25 @@ static int rtl8169_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	unsigned long flags;
 	int ret;
 
+	del_timer_sync(&tp->timer);
+
 	spin_lock_irqsave(&tp->lock, flags);
-	ret = rtl8169_set_speed(dev,
-		cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
+	ret = rtl8169_set_speed(dev, cmd->autoneg, ethtool_cmd_speed(cmd),
+				cmd->duplex, cmd->advertising);
 	spin_unlock_irqrestore(&tp->lock, flags);
 
 	return ret;
 }
 
-static u32 rtl8169_get_rx_csum(struct net_device *dev)
+static u32 rtl8169_fix_features(struct net_device *dev, u32 features)
 {
-	struct rtl8169_private *tp = netdev_priv(dev);
+	if (dev->mtu > TD_MSS_MAX)
+		features &= ~NETIF_F_ALL_TSO;
 
-	return tp->cp_cmd & RxChkSum;
+	return features;
 }
 
-static int rtl8169_set_rx_csum(struct net_device *dev, u32 data)
+static int rtl8169_set_features(struct net_device *dev, u32 features)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
@@ -1262,11 +1385,16 @@ static int rtl8169_set_rx_csum(struct net_device *dev, u32 data)
 
 	spin_lock_irqsave(&tp->lock, flags);
 
-	if (data)
+	if (features & NETIF_F_RXCSUM)
 		tp->cp_cmd |= RxChkSum;
 	else
 		tp->cp_cmd &= ~RxChkSum;
 
+	if (dev->features & NETIF_F_HW_VLAN_RX)
+		tp->cp_cmd |= RxVlan;
+	else
+		tp->cp_cmd &= ~RxVlan;
+
 	RTL_W16(CPlusCmd, tp->cp_cmd);
 	RTL_R16(CPlusCmd);
 
@@ -1282,27 +1410,6 @@ static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
 		TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00;
 }
 
-#define NETIF_F_HW_VLAN_TX_RX	(NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX)
-
-static void rtl8169_vlan_mode(struct net_device *dev)
-{
-	struct rtl8169_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->mmio_addr;
-	unsigned long flags;
-
-	spin_lock_irqsave(&tp->lock, flags);
-	if (dev->features & NETIF_F_HW_VLAN_RX)
-		tp->cp_cmd |= RxVlan;
-	else
-		tp->cp_cmd &= ~RxVlan;
-	RTL_W16(CPlusCmd, tp->cp_cmd);
-	/* PCI commit */
-	RTL_R16(CPlusCmd);
-	spin_unlock_irqrestore(&tp->lock, flags);
-
-	dev->vlan_features = dev->features &~ NETIF_F_HW_VLAN_TX_RX;
-}
-
 static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff *skb)
 {
 	u32 opts2 = le32_to_cpu(desc->opts2);
@@ -1328,7 +1435,7 @@ static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
 	cmd->advertising = (status & TBINwEnable) ?  ADVERTISED_Autoneg : 0;
 	cmd->autoneg = !!(status & TBINwEnable);
 
-	cmd->speed = SPEED_1000;
+	ethtool_cmd_speed_set(cmd, SPEED_1000);
 	cmd->duplex = DUPLEX_FULL; /* Always set */
 
 	return 0;
@@ -1413,11 +1520,11 @@ static void rtl8169_update_counters(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
+	struct device *d = &tp->pci_dev->dev;
 	struct rtl8169_counters *counters;
 	dma_addr_t paddr;
 	u32 cmd;
 	int wait = 1000;
-	struct device *d = &tp->pci_dev->dev;
 
 	/*
 	 * Some chips are unable to dump tally counters when the receiver
@@ -1437,7 +1544,6 @@ static void rtl8169_update_counters(struct net_device *dev)
 
 	while (wait--) {
 		if ((RTL_R32(CounterAddrLow) & CounterDump) == 0) {
-			/* copy updated counters */
 			memcpy(&tp->counters, counters, sizeof(*counters));
 			break;
 		}
@@ -1483,28 +1589,6 @@ static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)
 	}
 }
 
-static int rtl8169_set_flags(struct net_device *dev, u32 data)
-{
-	struct rtl8169_private *tp = netdev_priv(dev);
-	unsigned long old_feat = dev->features;
-	int rc;
-
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_05) &&
-	    !(data & ETH_FLAG_RXVLAN)) {
-		netif_info(tp, drv, dev, "8110SCd requires hardware Rx VLAN\n");
-		return -EINVAL;
-	}
-
-	rc = ethtool_op_set_flags(dev, data, ETH_FLAG_TXVLAN | ETH_FLAG_RXVLAN);
-	if (rc)
-		return rc;
-
-	if ((old_feat ^ dev->features) & NETIF_F_HW_VLAN_RX)
-		rtl8169_vlan_mode(dev);
-
-	return 0;
-}
-
 static const struct ethtool_ops rtl8169_ethtool_ops = {
 	.get_drvinfo		= rtl8169_get_drvinfo,
 	.get_regs_len		= rtl8169_get_regs_len,
@@ -1513,24 +1597,18 @@ static const struct ethtool_ops rtl8169_ethtool_ops = {
 	.set_settings		= rtl8169_set_settings,
 	.get_msglevel		= rtl8169_get_msglevel,
 	.set_msglevel		= rtl8169_set_msglevel,
-	.get_rx_csum		= rtl8169_get_rx_csum,
-	.set_rx_csum		= rtl8169_set_rx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_csum,
-	.set_sg			= ethtool_op_set_sg,
-	.set_tso		= ethtool_op_set_tso,
 	.get_regs		= rtl8169_get_regs,
 	.get_wol		= rtl8169_get_wol,
 	.set_wol		= rtl8169_set_wol,
 	.get_strings		= rtl8169_get_strings,
 	.get_sset_count		= rtl8169_get_sset_count,
 	.get_ethtool_stats	= rtl8169_get_ethtool_stats,
-	.set_flags		= rtl8169_set_flags,
-	.get_flags		= ethtool_op_get_flags,
 };
 
 static void rtl8169_get_mac_version(struct rtl8169_private *tp,
-				    void __iomem *ioaddr)
+				    struct net_device *dev, u8 default_version)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
 	/*
 	 * The driver currently handles the 8168Bf and the 8168Be identically
 	 * but they can be identified more specifically through the test below
@@ -1547,6 +1625,11 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 		u32 val;
 		int mac_version;
 	} mac_info[] = {
+		/* 8168E family. */
+		{ 0x7cf00000, 0x2c200000,	RTL_GIGA_MAC_VER_33 },
+		{ 0x7cf00000, 0x2c100000,	RTL_GIGA_MAC_VER_32 },
+		{ 0x7c800000, 0x2c000000,	RTL_GIGA_MAC_VER_33 },
+
 		/* 8168D family. */
 		{ 0x7cf00000, 0x28300000,	RTL_GIGA_MAC_VER_26 },
 		{ 0x7cf00000, 0x28100000,	RTL_GIGA_MAC_VER_25 },
@@ -1555,6 +1638,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 		/* 8168DP family. */
 		{ 0x7cf00000, 0x28800000,	RTL_GIGA_MAC_VER_27 },
 		{ 0x7cf00000, 0x28a00000,	RTL_GIGA_MAC_VER_28 },
+		{ 0x7cf00000, 0x28b00000,	RTL_GIGA_MAC_VER_31 },
 
 		/* 8168C family. */
 		{ 0x7cf00000, 0x3cb00000,	RTL_GIGA_MAC_VER_24 },
@@ -1574,6 +1658,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 		{ 0x7c800000, 0x30000000,	RTL_GIGA_MAC_VER_11 },
 
 		/* 8101 family. */
+		{ 0x7cf00000, 0x40b00000,	RTL_GIGA_MAC_VER_30 },
 		{ 0x7cf00000, 0x40a00000,	RTL_GIGA_MAC_VER_30 },
 		{ 0x7cf00000, 0x40900000,	RTL_GIGA_MAC_VER_29 },
 		{ 0x7c800000, 0x40800000,	RTL_GIGA_MAC_VER_30 },
@@ -1610,6 +1695,12 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 	while ((reg & p->mask) != p->val)
 		p++;
 	tp->mac_version = p->mac_version;
+
+	if (tp->mac_version == RTL_GIGA_MAC_NONE) {
+		netif_notice(tp, probe, dev,
+			     "unknown MAC, using family default\n");
+		tp->mac_version = default_version;
+	}
 }
 
 static void rtl8169_print_mac_version(struct rtl8169_private *tp)
@@ -1679,14 +1770,14 @@ rtl_phy_write_fw(struct rtl8169_private *tp, const struct firmware *fw)
 		case PHY_BJMPN:
 			if (regno > index) {
 				netif_err(tp, probe, tp->dev,
-					"Out of range of firmware\n");
+					  "Out of range of firmware\n");
 				return;
 			}
 			break;
 		case PHY_READCOUNT_EQ_SKIP:
 			if (index + 2 >= fw_size) {
 				netif_err(tp, probe, tp->dev,
-					"Out of range of firmware\n");
+					  "Out of range of firmware\n");
 				return;
 			}
 			break;
@@ -1695,7 +1786,7 @@ rtl_phy_write_fw(struct rtl8169_private *tp, const struct firmware *fw)
 		case PHY_SKIPN:
 			if (index + 1 + regno >= fw_size) {
 				netif_err(tp, probe, tp->dev,
-					"Out of range of firmware\n");
+					  "Out of range of firmware\n");
 				return;
 			}
 			break;
@@ -1751,10 +1842,7 @@ rtl_phy_write_fw(struct rtl8169_private *tp, const struct firmware *fw)
 			index++;
 			break;
 		case PHY_READCOUNT_EQ_SKIP:
-			if (count == data)
-				index += 2;
-			else
-				index += 1;
+			index += (count == data) ? 2 : 1;
 			break;
 		case PHY_COMP_EQ_SKIPN:
 			if (predata == data)
@@ -1789,25 +1877,26 @@ rtl_phy_write_fw(struct rtl8169_private *tp, const struct firmware *fw)
 
 static void rtl_release_firmware(struct rtl8169_private *tp)
 {
-	release_firmware(tp->fw);
-	tp->fw = NULL;
+	if (!IS_ERR_OR_NULL(tp->fw))
+		release_firmware(tp->fw);
+	tp->fw = RTL_FIRMWARE_UNKNOWN;
 }
 
-static int rtl_apply_firmware(struct rtl8169_private *tp, const char *fw_name)
+static void rtl_apply_firmware(struct rtl8169_private *tp)
 {
-	const struct firmware **fw = &tp->fw;
-	int rc = !*fw;
-
-	if (rc) {
-		rc = request_firmware(fw, fw_name, &tp->pci_dev->dev);
-		if (rc < 0)
-			goto out;
-	}
+	const struct firmware *fw = tp->fw;
 
 	/* TODO: release firmware once rtl_phy_write_fw signals failures. */
-	rtl_phy_write_fw(tp, *fw);
-out:
-	return rc;
+	if (!IS_ERR_OR_NULL(fw))
+		rtl_phy_write_fw(tp, fw);
+}
+
+static void rtl_apply_firmware_cond(struct rtl8169_private *tp, u8 reg, u16 val)
+{
+	if (rtl_readphy(tp, reg) != val)
+		netif_warn(tp, hw, tp->dev, "chipset not ready for firmware\n");
+	else
+		rtl_apply_firmware(tp);
 }
 
 static void rtl8169s_hw_phy_config(struct rtl8169_private *tp)
@@ -2164,7 +2253,7 @@ static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp)
 
 		/*
 		 * Tx Error Issue
-		 * enhance line driver power
+		 * Enhance line driver power
 		 */
 		{ 0x1f, 0x0002 },
 		{ 0x06, 0x5561 },
@@ -2246,10 +2335,8 @@ static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp)
 
 	rtl_writephy(tp, 0x1f, 0x0005);
 	rtl_writephy(tp, 0x05, 0x001b);
-	if ((rtl_readphy(tp, 0x06) != 0xbf00) ||
-	    (rtl_apply_firmware(tp, FIRMWARE_8168D_1) < 0)) {
-		netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
-	}
+
+	rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xbf00);
 
 	rtl_writephy(tp, 0x1f, 0x0000);
 }
@@ -2278,7 +2365,7 @@ static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp)
 
 		/*
 		 * Tx Error Issue
-		 * enhance line driver power
+		 * Enhance line driver power
 		 */
 		{ 0x1f, 0x0002 },
 		{ 0x06, 0x5561 },
@@ -2351,10 +2438,8 @@ static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp)
 
 	rtl_writephy(tp, 0x1f, 0x0005);
 	rtl_writephy(tp, 0x05, 0x001b);
-	if ((rtl_readphy(tp, 0x06) != 0xb300) ||
-	    (rtl_apply_firmware(tp, FIRMWARE_8168D_2) < 0)) {
-		netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
-	}
+
+	rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xb300);
 
 	rtl_writephy(tp, 0x1f, 0x0000);
 }
@@ -2436,6 +2521,79 @@ static void rtl8168d_4_hw_phy_config(struct rtl8169_private *tp)
 	rtl_patchphy(tp, 0x0d, 1 << 5);
 }
 
+static void rtl8168e_hw_phy_config(struct rtl8169_private *tp)
+{
+	static const struct phy_reg phy_reg_init[] = {
+		/* Enable Delay cap */
+		{ 0x1f, 0x0005 },
+		{ 0x05, 0x8b80 },
+		{ 0x06, 0xc896 },
+		{ 0x1f, 0x0000 },
+
+		/* Channel estimation fine tune */
+		{ 0x1f, 0x0001 },
+		{ 0x0b, 0x6c20 },
+		{ 0x07, 0x2872 },
+		{ 0x1c, 0xefff },
+		{ 0x1f, 0x0003 },
+		{ 0x14, 0x6420 },
+		{ 0x1f, 0x0000 },
+
+		/* Update PFM & 10M TX idle timer */
+		{ 0x1f, 0x0007 },
+		{ 0x1e, 0x002f },
+		{ 0x15, 0x1919 },
+		{ 0x1f, 0x0000 },
+
+		{ 0x1f, 0x0007 },
+		{ 0x1e, 0x00ac },
+		{ 0x18, 0x0006 },
+		{ 0x1f, 0x0000 }
+	};
+
+	rtl_apply_firmware(tp);
+
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+	/* DCO enable for 10M IDLE Power */
+	rtl_writephy(tp, 0x1f, 0x0007);
+	rtl_writephy(tp, 0x1e, 0x0023);
+	rtl_w1w0_phy(tp, 0x17, 0x0006, 0x0000);
+	rtl_writephy(tp, 0x1f, 0x0000);
+
+	/* For impedance matching */
+	rtl_writephy(tp, 0x1f, 0x0002);
+	rtl_w1w0_phy(tp, 0x08, 0x8000, 0x7f00);
+	rtl_writephy(tp, 0x1f, 0x0000);
+
+	/* PHY auto speed down */
+	rtl_writephy(tp, 0x1f, 0x0007);
+	rtl_writephy(tp, 0x1e, 0x002d);
+	rtl_w1w0_phy(tp, 0x18, 0x0050, 0x0000);
+	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl_w1w0_phy(tp, 0x14, 0x8000, 0x0000);
+
+	rtl_writephy(tp, 0x1f, 0x0005);
+	rtl_writephy(tp, 0x05, 0x8b86);
+	rtl_w1w0_phy(tp, 0x06, 0x0001, 0x0000);
+	rtl_writephy(tp, 0x1f, 0x0000);
+
+	rtl_writephy(tp, 0x1f, 0x0005);
+	rtl_writephy(tp, 0x05, 0x8b85);
+	rtl_w1w0_phy(tp, 0x06, 0x0000, 0x2000);
+	rtl_writephy(tp, 0x1f, 0x0007);
+	rtl_writephy(tp, 0x1e, 0x0020);
+	rtl_w1w0_phy(tp, 0x15, 0x0000, 0x1100);
+	rtl_writephy(tp, 0x1f, 0x0006);
+	rtl_writephy(tp, 0x00, 0x5a00);
+	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl_writephy(tp, 0x0d, 0x0007);
+	rtl_writephy(tp, 0x0e, 0x003c);
+	rtl_writephy(tp, 0x0d, 0x4007);
+	rtl_writephy(tp, 0x0e, 0x0000);
+	rtl_writephy(tp, 0x0d, 0x0000);
+}
+
 static void rtl8102e_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
@@ -2474,8 +2632,7 @@ static void rtl8105e_hw_phy_config(struct rtl8169_private *tp)
 	rtl_writephy(tp, 0x18, 0x0310);
 	msleep(100);
 
-	if (rtl_apply_firmware(tp, FIRMWARE_8105E_1) < 0)
-		netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
+	rtl_apply_firmware(tp);
 
 	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
@@ -2551,6 +2708,13 @@ static void rtl_hw_phy_config(struct net_device *dev)
 	case RTL_GIGA_MAC_VER_30:
 		rtl8105e_hw_phy_config(tp);
 		break;
+	case RTL_GIGA_MAC_VER_31:
+		/* None. */
+		break;
+	case RTL_GIGA_MAC_VER_32:
+	case RTL_GIGA_MAC_VER_33:
+		rtl8168e_hw_phy_config(tp);
+		break;
 
 	default:
 		break;
@@ -2567,9 +2731,6 @@ static void rtl8169_phy_timer(unsigned long __opaque)
 
 	assert(tp->mac_version > RTL_GIGA_MAC_VER_01);
 
-	if (!(tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL))
-		return;
-
 	spin_lock_irq(&tp->lock);
 
 	if (tp->phy_reset_pending(tp)) {
@@ -2594,28 +2755,6 @@ out_unlock:
 	spin_unlock_irq(&tp->lock);
 }
 
-static inline void rtl8169_delete_timer(struct net_device *dev)
-{
-	struct rtl8169_private *tp = netdev_priv(dev);
-	struct timer_list *timer = &tp->timer;
-
-	if (tp->mac_version <= RTL_GIGA_MAC_VER_01)
-		return;
-
-	del_timer_sync(timer);
-}
-
-static inline void rtl8169_request_timer(struct net_device *dev)
-{
-	struct rtl8169_private *tp = netdev_priv(dev);
-	struct timer_list *timer = &tp->timer;
-
-	if (tp->mac_version <= RTL_GIGA_MAC_VER_01)
-		return;
-
-	mod_timer(timer, jiffies + RTL8169_PHY_TIMEOUT);
-}
-
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
@@ -2683,11 +2822,11 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
 	rtl8169_phy_reset(dev, tp);
 
 	rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
-		ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
-		ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
-		(tp->mii.supports_gmii ?
-			ADVERTISED_1000baseT_Half |
-			ADVERTISED_1000baseT_Full : 0));
+			  ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+			  ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
+			  (tp->mii.supports_gmii ?
+			   ADVERTISED_1000baseT_Half |
+			   ADVERTISED_1000baseT_Full : 0));
 
 	if (RTL_R8(PHYstatus) & TBI_Enable)
 		netif_info(tp, link, dev, "TBI auto-negotiating\n");
@@ -2740,7 +2879,8 @@ static int rtl8169_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return netif_running(dev) ? tp->do_ioctl(tp, data, cmd) : -ENODEV;
 }
 
-static int rtl_xmii_ioctl(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd)
+static int rtl_xmii_ioctl(struct rtl8169_private *tp,
+			  struct mii_ioctl_data *data, int cmd)
 {
 	switch (cmd) {
 	case SIOCGMIIPHY:
@@ -2840,6 +2980,8 @@ static const struct net_device_ops rtl8169_netdev_ops = {
 	.ndo_tx_timeout		= rtl8169_tx_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= rtl8169_change_mtu,
+	.ndo_fix_features	= rtl8169_fix_features,
+	.ndo_set_features	= rtl8169_set_features,
 	.ndo_set_mac_address	= rtl_set_mac_address,
 	.ndo_do_ioctl		= rtl8169_ioctl,
 	.ndo_set_multicast_list	= rtl_set_rx_mode,
@@ -2859,6 +3001,7 @@ static void __devinit rtl_init_mdio_ops(struct rtl8169_private *tp)
 		ops->read	= r8168dp_1_mdio_read;
 		break;
 	case RTL_GIGA_MAC_VER_28:
+	case RTL_GIGA_MAC_VER_31:
 		ops->write	= r8168dp_2_mdio_write;
 		ops->read	= r8168dp_2_mdio_read;
 		break;
@@ -2900,33 +3043,82 @@ static void r810x_pll_power_up(struct rtl8169_private *tp)
 static void r8168_phy_power_up(struct rtl8169_private *tp)
 {
 	rtl_writephy(tp, 0x1f, 0x0000);
-	rtl_writephy(tp, 0x0e, 0x0000);
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_11:
+	case RTL_GIGA_MAC_VER_12:
+	case RTL_GIGA_MAC_VER_17:
+	case RTL_GIGA_MAC_VER_18:
+	case RTL_GIGA_MAC_VER_19:
+	case RTL_GIGA_MAC_VER_20:
+	case RTL_GIGA_MAC_VER_21:
+	case RTL_GIGA_MAC_VER_22:
+	case RTL_GIGA_MAC_VER_23:
+	case RTL_GIGA_MAC_VER_24:
+	case RTL_GIGA_MAC_VER_25:
+	case RTL_GIGA_MAC_VER_26:
+	case RTL_GIGA_MAC_VER_27:
+	case RTL_GIGA_MAC_VER_28:
+	case RTL_GIGA_MAC_VER_31:
+		rtl_writephy(tp, 0x0e, 0x0000);
+		break;
+	default:
+		break;
+	}
 	rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE);
 }
 
 static void r8168_phy_power_down(struct rtl8169_private *tp)
 {
 	rtl_writephy(tp, 0x1f, 0x0000);
-	rtl_writephy(tp, 0x0e, 0x0200);
-	rtl_writephy(tp, MII_BMCR, BMCR_PDOWN);
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_32:
+	case RTL_GIGA_MAC_VER_33:
+		rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE | BMCR_PDOWN);
+		break;
+
+	case RTL_GIGA_MAC_VER_11:
+	case RTL_GIGA_MAC_VER_12:
+	case RTL_GIGA_MAC_VER_17:
+	case RTL_GIGA_MAC_VER_18:
+	case RTL_GIGA_MAC_VER_19:
+	case RTL_GIGA_MAC_VER_20:
+	case RTL_GIGA_MAC_VER_21:
+	case RTL_GIGA_MAC_VER_22:
+	case RTL_GIGA_MAC_VER_23:
+	case RTL_GIGA_MAC_VER_24:
+	case RTL_GIGA_MAC_VER_25:
+	case RTL_GIGA_MAC_VER_26:
+	case RTL_GIGA_MAC_VER_27:
+	case RTL_GIGA_MAC_VER_28:
+	case RTL_GIGA_MAC_VER_31:
+		rtl_writephy(tp, 0x0e, 0x0200);
+	default:
+		rtl_writephy(tp, MII_BMCR, BMCR_PDOWN);
+		break;
+	}
 }
 
 static void r8168_pll_power_down(struct rtl8169_private *tp)
 {
 	void __iomem *ioaddr = tp->mmio_addr;
 
-	if (((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
-	     (tp->mac_version == RTL_GIGA_MAC_VER_28)) &&
-	    (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) {
+	if ((tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+	     tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+	     tp->mac_version == RTL_GIGA_MAC_VER_31) &&
+	    r8168dp_check_dash(tp)) {
 		return;
 	}
 
-	if (((tp->mac_version == RTL_GIGA_MAC_VER_23) ||
-	     (tp->mac_version == RTL_GIGA_MAC_VER_24)) &&
+	if ((tp->mac_version == RTL_GIGA_MAC_VER_23 ||
+	     tp->mac_version == RTL_GIGA_MAC_VER_24) &&
 	    (RTL_R16(CPlusCmd) & ASF)) {
 		return;
 	}
 
+	if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_33)
+		rtl_ephy_write(ioaddr, 0x19, 0xff64);
+
 	if (__rtl8169_get_wol(tp) & WAKE_ANY) {
 		rtl_writephy(tp, 0x1f, 0x0000);
 		rtl_writephy(tp, MII_BMCR, 0x0000);
@@ -2943,6 +3135,9 @@ static void r8168_pll_power_down(struct rtl8169_private *tp)
 	case RTL_GIGA_MAC_VER_26:
 	case RTL_GIGA_MAC_VER_27:
 	case RTL_GIGA_MAC_VER_28:
+	case RTL_GIGA_MAC_VER_31:
+	case RTL_GIGA_MAC_VER_32:
+	case RTL_GIGA_MAC_VER_33:
 		RTL_W8(PMCH, RTL_R8(PMCH) & ~0x80);
 		break;
 	}
@@ -2952,9 +3147,10 @@ static void r8168_pll_power_up(struct rtl8169_private *tp)
 {
 	void __iomem *ioaddr = tp->mmio_addr;
 
-	if (((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
-	     (tp->mac_version == RTL_GIGA_MAC_VER_28)) &&
-	    (ocp_read(tp, 0x0f, 0x0010) & 0x00008000)) {
+	if ((tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+	     tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+	     tp->mac_version == RTL_GIGA_MAC_VER_31) &&
+	    r8168dp_check_dash(tp)) {
 		return;
 	}
 
@@ -2963,6 +3159,9 @@ static void r8168_pll_power_up(struct rtl8169_private *tp)
 	case RTL_GIGA_MAC_VER_26:
 	case RTL_GIGA_MAC_VER_27:
 	case RTL_GIGA_MAC_VER_28:
+	case RTL_GIGA_MAC_VER_31:
+	case RTL_GIGA_MAC_VER_32:
+	case RTL_GIGA_MAC_VER_33:
 		RTL_W8(PMCH, RTL_R8(PMCH) | 0x80);
 		break;
 	}
@@ -3017,6 +3216,9 @@ static void __devinit rtl_init_pll_power_ops(struct rtl8169_private *tp)
 	case RTL_GIGA_MAC_VER_26:
 	case RTL_GIGA_MAC_VER_27:
 	case RTL_GIGA_MAC_VER_28:
+	case RTL_GIGA_MAC_VER_31:
+	case RTL_GIGA_MAC_VER_32:
+	case RTL_GIGA_MAC_VER_33:
 		ops->down	= r8168_pll_power_down;
 		ops->up		= r8168_pll_power_up;
 		break;
@@ -3028,6 +3230,22 @@ static void __devinit rtl_init_pll_power_ops(struct rtl8169_private *tp)
 	}
 }
 
+static void rtl_hw_reset(struct rtl8169_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	int i;
+
+	/* Soft reset the chip. */
+	RTL_W8(ChipCmd, CmdReset);
+
+	/* Check that the chip has finished the reset. */
+	for (i = 0; i < 100; i++) {
+		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
+			break;
+		msleep_interruptible(1);
+	}
+}
+
 static int __devinit
 rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -3037,7 +3255,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct mii_if_info *mii;
 	struct net_device *dev;
 	void __iomem *ioaddr;
-	unsigned int i;
+	int chipset, i;
 	int rc;
 
 	if (netif_msg_drv(&debug)) {
@@ -3127,6 +3345,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		rc = -EIO;
 		goto err_out_free_res_3;
 	}
+	tp->mmio_addr = ioaddr;
 
 	tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (!tp->pcie_cap)
@@ -3134,22 +3353,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	RTL_W16(IntrMask, 0x0000);
 
-	/* Soft reset the chip. */
-	RTL_W8(ChipCmd, CmdReset);
-
-	/* Check that the chip has finished the reset. */
-	for (i = 0; i < 100; i++) {
-		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
-			break;
-		msleep_interruptible(1);
-	}
+	rtl_hw_reset(tp);
 
 	RTL_W16(IntrStatus, 0xffff);
 
 	pci_set_master(pdev);
 
 	/* Identify chip attached to board */
-	rtl8169_get_mac_version(tp, ioaddr);
+	rtl8169_get_mac_version(tp, dev, cfg->default_ver);
 
 	/*
 	 * Pretend we are using VLANs; This bypasses a nasty bug where
@@ -3161,25 +3372,10 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	rtl_init_mdio_ops(tp);
 	rtl_init_pll_power_ops(tp);
 
-	/* Use appropriate default if unknown */
-	if (tp->mac_version == RTL_GIGA_MAC_NONE) {
-		netif_notice(tp, probe, dev,
-			     "unknown MAC, using family default\n");
-		tp->mac_version = cfg->default_ver;
-	}
-
 	rtl8169_print_mac_version(tp);
 
-	for (i = 0; i < ARRAY_SIZE(rtl_chip_info); i++) {
-		if (tp->mac_version == rtl_chip_info[i].mac_version)
-			break;
-	}
-	if (i == ARRAY_SIZE(rtl_chip_info)) {
-		dev_err(&pdev->dev,
-			"driver bug, MAC version not found in rtl_chip_info\n");
-		goto err_out_msi_4;
-	}
-	tp->chipset = i;
+	chipset = tp->mac_version;
+	tp->txd_version = rtl_chip_infos[chipset].txd_version;
 
 	RTL_W8(Cfg9346, Cfg9346_Unlock);
 	RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
@@ -3199,8 +3395,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		tp->phy_reset_pending = rtl8169_tbi_reset_pending;
 		tp->link_ok = rtl8169_tbi_link_ok;
 		tp->do_ioctl = rtl_tbi_ioctl;
-
-		tp->phy_1000_ctrl_reg = ADVERTISE_1000FULL; /* Implied by TBI */
 	} else {
 		tp->set_speed = rtl8169_set_speed_xmii;
 		tp->get_settings = rtl8169_gset_xmii;
@@ -3212,8 +3406,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	spin_lock_init(&tp->lock);
 
-	tp->mmio_addr = ioaddr;
-
 	/* Get MAC address */
 	for (i = 0; i < MAC_ADDR_LEN; i++)
 		dev->dev_addr[i] = RTL_R8(MAC0 + i);
@@ -3226,7 +3418,19 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT);
 
-	dev->features |= NETIF_F_HW_VLAN_TX_RX | NETIF_F_GRO;
+	/* don't enable SG, IP_CSUM and TSO by default - it might not work
+	 * properly for all devices */
+	dev->features |= NETIF_F_RXCSUM |
+		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+		NETIF_F_RXCSUM | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+		NETIF_F_HIGHDMA;
+
+	if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+		/* 8110SCd requires hardware Rx VLAN - disallow toggling */
+		dev->hw_features &= ~NETIF_F_HW_VLAN_RX;
 
 	tp->intr_mask = 0xffff;
 	tp->hw_start = cfg->hw_start;
@@ -3237,6 +3441,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	tp->timer.data = (unsigned long) dev;
 	tp->timer.function = rtl8169_phy_timer;
 
+	tp->fw = RTL_FIRMWARE_UNKNOWN;
+
 	rc = register_netdev(dev);
 	if (rc < 0)
 		goto err_out_msi_4;
@@ -3244,12 +3450,12 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_set_drvdata(pdev, dev);
 
 	netif_info(tp, probe, dev, "%s at 0x%lx, %pM, XID %08x IRQ %d\n",
-		   rtl_chip_info[tp->chipset].name,
-		   dev->base_addr, dev->dev_addr,
+		   rtl_chip_infos[chipset].name, dev->base_addr, dev->dev_addr,
 		   (u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), dev->irq);
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_28)) {
+	if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_31) {
 		rtl8168_driver_start(tp);
 	}
 
@@ -3281,17 +3487,18 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rtl8169_private *tp = netdev_priv(dev);
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_28)) {
+	if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_31) {
 		rtl8168_driver_stop(tp);
 	}
 
 	cancel_delayed_work_sync(&tp->task);
 
-	rtl_release_firmware(tp);
-
 	unregister_netdev(dev);
 
+	rtl_release_firmware(tp);
+
 	if (pci_dev_run_wake(pdev))
 		pm_runtime_get_noresume(&pdev->dev);
 
@@ -3303,6 +3510,27 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 }
 
+static void rtl_request_firmware(struct rtl8169_private *tp)
+{
+	/* Return early if the firmware is already loaded / cached. */
+	if (IS_ERR(tp->fw)) {
+		const char *name;
+
+		name = rtl_lookup_firmware_name(tp);
+		if (name) {
+			int rc;
+
+			rc = request_firmware(&tp->fw, name, &tp->pci_dev->dev);
+			if (rc >= 0)
+				return;
+
+			netif_warn(tp, ifup, tp->dev, "unable to load "
+				"firmware patch %s (%d)\n", name, rc);
+		}
+		tp->fw = NULL;
+	}
+}
+
 static int rtl8169_open(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
@@ -3334,24 +3562,24 @@ static int rtl8169_open(struct net_device *dev)
 
 	smp_mb();
 
+	rtl_request_firmware(tp);
+
 	retval = request_irq(dev->irq, rtl8169_interrupt,
 			     (tp->features & RTL_FEATURE_MSI) ? 0 : IRQF_SHARED,
 			     dev->name, dev);
 	if (retval < 0)
-		goto err_release_ring_2;
+		goto err_release_fw_2;
 
 	napi_enable(&tp->napi);
 
 	rtl8169_init_phy(dev, tp);
 
-	rtl8169_vlan_mode(dev);
+	rtl8169_set_features(dev, dev->features);
 
 	rtl_pll_power_up(tp);
 
 	rtl_hw_start(dev);
 
-	rtl8169_request_timer(dev);
-
 	tp->saved_wolopts = 0;
 	pm_runtime_put_noidle(&pdev->dev);
 
@@ -3359,7 +3587,8 @@ static int rtl8169_open(struct net_device *dev)
 out:
 	return retval;
 
-err_release_ring_2:
+err_release_fw_2:
+	rtl_release_firmware(tp);
 	rtl8169_rx_clear(tp);
 err_free_rx_1:
 	dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
@@ -3382,7 +3611,8 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp)
 	rtl8169_irq_mask_and_ack(ioaddr);
 
 	if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
-	    tp->mac_version == RTL_GIGA_MAC_VER_28) {
+	    tp->mac_version == RTL_GIGA_MAC_VER_28 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_31) {
 		while (RTL_R8(TxPoll) & NPQ)
 			udelay(20);
 
@@ -3400,7 +3630,7 @@ static void rtl_set_rx_tx_config_registers(struct rtl8169_private *tp)
 	void __iomem *ioaddr = tp->mmio_addr;
 	u32 cfg = rtl8169_rx_config;
 
-	cfg |= (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+	cfg |= (RTL_R32(RxConfig) & RTL_RX_CONFIG_MASK);
 	RTL_W32(RxConfig, cfg);
 
 	/* Set DMA burst size and Interframe Gap Time */
@@ -3411,25 +3641,14 @@ static void rtl_set_rx_tx_config_registers(struct rtl8169_private *tp)
 static void rtl_hw_start(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->mmio_addr;
-	unsigned int i;
-
-	/* Soft reset the chip. */
-	RTL_W8(ChipCmd, CmdReset);
 
-	/* Check that the chip has finished the reset. */
-	for (i = 0; i < 100; i++) {
-		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
-			break;
-		msleep_interruptible(1);
-	}
+	rtl_hw_reset(tp);
 
 	tp->hw_start(dev);
 
 	netif_start_queue(dev);
 }
 
-
 static void rtl_set_rx_tx_desc_registers(struct rtl8169_private *tp,
 					 void __iomem *ioaddr)
 {
@@ -3495,26 +3714,26 @@ static void rtl_hw_start_8169(struct net_device *dev)
 	}
 
 	RTL_W8(Cfg9346, Cfg9346_Unlock);
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_04))
+	if (tp->mac_version == RTL_GIGA_MAC_VER_01 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_02 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_03 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_04)
 		RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
 
 	RTL_W8(EarlyTxThres, NoEarlyTx);
 
 	rtl_set_rx_max_size(ioaddr, rx_buf_sz);
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_04))
+	if (tp->mac_version == RTL_GIGA_MAC_VER_01 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_02 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_03 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_04)
 		rtl_set_rx_tx_config_registers(tp);
 
 	tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+	if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_03) {
 		dprintk("Set MAC Reg C+CR Offset 0xE0. "
 			"Bit-3 and bit-14 MUST be 1\n");
 		tp->cp_cmd |= (1 << 14);
@@ -3532,10 +3751,10 @@ static void rtl_hw_start_8169(struct net_device *dev)
 
 	rtl_set_rx_tx_desc_registers(tp, ioaddr);
 
-	if ((tp->mac_version != RTL_GIGA_MAC_VER_01) &&
-	    (tp->mac_version != RTL_GIGA_MAC_VER_02) &&
-	    (tp->mac_version != RTL_GIGA_MAC_VER_03) &&
-	    (tp->mac_version != RTL_GIGA_MAC_VER_04)) {
+	if (tp->mac_version != RTL_GIGA_MAC_VER_01 &&
+	    tp->mac_version != RTL_GIGA_MAC_VER_02 &&
+	    tp->mac_version != RTL_GIGA_MAC_VER_03 &&
+	    tp->mac_version != RTL_GIGA_MAC_VER_04) {
 		RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
 		rtl_set_rx_tx_config_registers(tp);
 	}
@@ -3779,6 +3998,17 @@ static void rtl_hw_start_8168d(void __iomem *ioaddr, struct pci_dev *pdev)
 	RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
 }
 
+static void rtl_hw_start_8168dp(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+	rtl_csi_access_enable_1(ioaddr);
+
+	rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+	RTL_W8(MaxTxPacketSize, TxPacketMax);
+
+	rtl_disable_clock_request(pdev);
+}
+
 static void rtl_hw_start_8168d_4(void __iomem *ioaddr, struct pci_dev *pdev)
 {
 	static const struct ephy_info e_info_8168d_4[] = {
@@ -3805,6 +4035,41 @@ static void rtl_hw_start_8168d_4(void __iomem *ioaddr, struct pci_dev *pdev)
 	rtl_enable_clock_request(pdev);
 }
 
+static void rtl_hw_start_8168e(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+	static const struct ephy_info e_info_8168e[] = {
+		{ 0x00, 0x0200,	0x0100 },
+		{ 0x00, 0x0000,	0x0004 },
+		{ 0x06, 0x0002,	0x0001 },
+		{ 0x06, 0x0000,	0x0030 },
+		{ 0x07, 0x0000,	0x2000 },
+		{ 0x00, 0x0000,	0x0020 },
+		{ 0x03, 0x5800,	0x2000 },
+		{ 0x03, 0x0000,	0x0001 },
+		{ 0x01, 0x0800,	0x1000 },
+		{ 0x07, 0x0000,	0x4000 },
+		{ 0x1e, 0x0000,	0x2000 },
+		{ 0x19, 0xffff,	0xfe6c },
+		{ 0x0a, 0x0000,	0x0040 }
+	};
+
+	rtl_csi_access_enable_2(ioaddr);
+
+	rtl_ephy_init(ioaddr, e_info_8168e, ARRAY_SIZE(e_info_8168e));
+
+	rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+	RTL_W8(MaxTxPacketSize, TxPacketMax);
+
+	rtl_disable_clock_request(pdev);
+
+	/* Reset tx FIFO pointer */
+	RTL_W32(MISC, RTL_R32(MISC) | TXPLA_RST);
+	RTL_W32(MISC, RTL_R32(MISC) & ~TXPLA_RST);
+
+	RTL_W8(Config5, RTL_R8(Config5) & ~Spi_en);
+}
+
 static void rtl_hw_start_8168(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
@@ -3842,55 +4107,64 @@ static void rtl_hw_start_8168(struct net_device *dev)
 	switch (tp->mac_version) {
 	case RTL_GIGA_MAC_VER_11:
 		rtl_hw_start_8168bb(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_12:
 	case RTL_GIGA_MAC_VER_17:
 		rtl_hw_start_8168bef(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_18:
 		rtl_hw_start_8168cp_1(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_19:
 		rtl_hw_start_8168c_1(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_20:
 		rtl_hw_start_8168c_2(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_21:
 		rtl_hw_start_8168c_3(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_22:
 		rtl_hw_start_8168c_4(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_23:
 		rtl_hw_start_8168cp_2(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_24:
 		rtl_hw_start_8168cp_3(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_25:
 	case RTL_GIGA_MAC_VER_26:
 	case RTL_GIGA_MAC_VER_27:
 		rtl_hw_start_8168d(ioaddr, pdev);
-	break;
+		break;
 
 	case RTL_GIGA_MAC_VER_28:
 		rtl_hw_start_8168d_4(ioaddr, pdev);
-	break;
+		break;
+
+	case RTL_GIGA_MAC_VER_31:
+		rtl_hw_start_8168dp(ioaddr, pdev);
+		break;
+
+	case RTL_GIGA_MAC_VER_32:
+	case RTL_GIGA_MAC_VER_33:
+		rtl_hw_start_8168e(ioaddr, pdev);
+		break;
 
 	default:
 		printk(KERN_ERR PFX "%s: unknown chipset (mac_version = %d).\n",
 			dev->name, tp->mac_version);
-	break;
+		break;
 	}
 
 	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
@@ -3974,10 +4248,10 @@ static void rtl_hw_start_8105e_1(void __iomem *ioaddr, struct pci_dev *pdev)
 		{ 0x0a,	0, 0x0020 }
 	};
 
-	/* Force LAN exit from ASPM if Rx/Tx are not idel */
+	/* Force LAN exit from ASPM if Rx/Tx are not idle */
 	RTL_W32(FuncEvent, RTL_R32(FuncEvent) | 0x002800);
 
-	/* disable Early Tally Counter */
+	/* Disable Early Tally Counter */
 	RTL_W32(FuncEvent, RTL_R32(FuncEvent) & ~0x010000);
 
 	RTL_W8(MCU, RTL_R8(MCU) | EN_NDP | EN_OOB_RESET);
@@ -3998,8 +4272,8 @@ static void rtl_hw_start_8101(struct net_device *dev)
 	void __iomem *ioaddr = tp->mmio_addr;
 	struct pci_dev *pdev = tp->pci_dev;
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_13) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_16)) {
+	if (tp->mac_version == RTL_GIGA_MAC_VER_13 ||
+	    tp->mac_version == RTL_GIGA_MAC_VER_16) {
 		int cap = tp->pcie_cap;
 
 		if (cap) {
@@ -4062,6 +4336,8 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
 		return -EINVAL;
 
 	dev->mtu = new_mtu;
+	netdev_update_features(dev);
+
 	return 0;
 }
 
@@ -4299,6 +4575,7 @@ static void rtl8169_reset_task(struct work_struct *work)
 	struct rtl8169_private *tp =
 		container_of(work, struct rtl8169_private, task.work);
 	struct net_device *dev = tp->dev;
+	int i;
 
 	rtnl_lock();
 
@@ -4307,19 +4584,15 @@ static void rtl8169_reset_task(struct work_struct *work)
 
 	rtl8169_wait_for_quiescence(dev);
 
-	rtl8169_rx_interrupt(dev, tp, tp->mmio_addr, ~(u32)0);
+	for (i = 0; i < NUM_RX_DESC; i++)
+		rtl8169_mark_to_asic(tp->RxDescArray + i, rx_buf_sz);
+
 	rtl8169_tx_clear(tp);
 
-	if (tp->dirty_rx == tp->cur_rx) {
-		rtl8169_init_ring_indexes(tp);
-		rtl_hw_start(dev);
-		netif_wake_queue(dev);
-		rtl8169_check_link_status(dev, tp, tp->mmio_addr);
-	} else {
-		if (net_ratelimit())
-			netif_emerg(tp, intr, dev, "Rx buffers shortage\n");
-		rtl8169_schedule_work(dev, rtl8169_reset_task);
-	}
+	rtl8169_init_ring_indexes(tp);
+	rtl_hw_start(dev);
+	netif_wake_queue(dev);
+	rtl8169_check_link_status(dev, tp, tp->mmio_addr);
 
 out_unlock:
 	rtnl_unlock();
@@ -4336,7 +4609,7 @@ static void rtl8169_tx_timeout(struct net_device *dev)
 }
 
 static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb,
-			      u32 opts1)
+			      u32 *opts)
 {
 	struct skb_shared_info *info = skb_shinfo(skb);
 	unsigned int cur_frag, entry;
@@ -4363,10 +4636,12 @@ static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb,
 			goto err_out;
 		}
 
-		/* anti gcc 2.95.3 bugware (sic) */
-		status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
+		/* Anti gcc 2.95.3 bugware (sic) */
+		status = opts[0] | len |
+			(RingEnd * !((entry + 1) % NUM_TX_DESC));
 
 		txd->opts1 = cpu_to_le32(status);
+		txd->opts2 = cpu_to_le32(opts[1]);
 		txd->addr = cpu_to_le64(mapping);
 
 		tp->tx_skb[entry].len = len;
@@ -4384,24 +4659,26 @@ err_out:
 	return -EIO;
 }
 
-static inline u32 rtl8169_tso_csum(struct sk_buff *skb, struct net_device *dev)
+static inline void rtl8169_tso_csum(struct rtl8169_private *tp,
+				    struct sk_buff *skb, u32 *opts)
 {
-	if (dev->features & NETIF_F_TSO) {
-		u32 mss = skb_shinfo(skb)->gso_size;
+	const struct rtl_tx_desc_info *info = tx_desc_info + tp->txd_version;
+	u32 mss = skb_shinfo(skb)->gso_size;
+	int offset = info->opts_offset;
 
-		if (mss)
-			return LargeSend | ((mss & MSSMask) << MSSShift);
-	}
-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+	if (mss) {
+		opts[0] |= TD_LSO;
+		opts[offset] |= min(mss, TD_MSS_MAX) << info->mss_shift;
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		const struct iphdr *ip = ip_hdr(skb);
 
 		if (ip->protocol == IPPROTO_TCP)
-			return IPCS | TCPCS;
+			opts[offset] |= info->checksum.tcp;
 		else if (ip->protocol == IPPROTO_UDP)
-			return IPCS | UDPCS;
-		WARN_ON(1);	/* we need a WARN() */
+			opts[offset] |= info->checksum.udp;
+		else
+			WARN_ON_ONCE(1);
 	}
-	return 0;
 }
 
 static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
@@ -4414,7 +4691,7 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 	struct device *d = &tp->pci_dev->dev;
 	dma_addr_t mapping;
 	u32 status, len;
-	u32 opts1;
+	u32 opts[2];
 	int frags;
 
 	if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
@@ -4435,31 +4712,35 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
 
 	tp->tx_skb[entry].len = len;
 	txd->addr = cpu_to_le64(mapping);
-	txd->opts2 = cpu_to_le32(rtl8169_tx_vlan_tag(tp, skb));
 
-	opts1 = DescOwn | rtl8169_tso_csum(skb, dev);
+	opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(tp, skb));
+	opts[0] = DescOwn;
 
-	frags = rtl8169_xmit_frags(tp, skb, opts1);
+	rtl8169_tso_csum(tp, skb, opts);
+
+	frags = rtl8169_xmit_frags(tp, skb, opts);
 	if (frags < 0)
 		goto err_dma_1;
 	else if (frags)
-		opts1 |= FirstFrag;
+		opts[0] |= FirstFrag;
 	else {
-		opts1 |= FirstFrag | LastFrag;
+		opts[0] |= FirstFrag | LastFrag;
 		tp->tx_skb[entry].skb = skb;
 	}
 
+	txd->opts2 = cpu_to_le32(opts[1]);
+
 	wmb();
 
-	/* anti gcc 2.95.3 bugware (sic) */
-	status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
+	/* Anti gcc 2.95.3 bugware (sic) */
+	status = opts[0] | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
 	txd->opts1 = cpu_to_le32(status);
 
 	tp->cur_tx += frags + 1;
 
 	wmb();
 
-	RTL_W8(TxPoll, NPQ);	/* set polling bit */
+	RTL_W8(TxPoll, NPQ);
 
 	if (TX_BUFFS_AVAIL(tp) < MAX_SKB_FRAGS) {
 		netif_stop_queue(dev);
@@ -4616,20 +4897,12 @@ static struct sk_buff *rtl8169_try_rx_copy(void *data,
 	return skb;
 }
 
-/*
- * Warning : rtl8169_rx_interrupt() might be called :
- * 1) from NAPI (softirq) context
- *	(polling = 1 : we should call netif_receive_skb())
- * 2) from process context (rtl8169_reset_task())
- *	(polling = 0 : we must call netif_rx() instead)
- */
 static int rtl8169_rx_interrupt(struct net_device *dev,
 				struct rtl8169_private *tp,
 				void __iomem *ioaddr, u32 budget)
 {
 	unsigned int cur_rx, rx_left;
 	unsigned int count;
-	int polling = (budget != ~(u32)0) ? 1 : 0;
 
 	cur_rx = tp->cur_rx;
 	rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
@@ -4689,10 +4962,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 
 			rtl8169_rx_vlan_tag(desc, skb);
 
-			if (likely(polling))
-				napi_gro_receive(&tp->napi, skb);
-			else
-				netif_rx(skb);
+			napi_gro_receive(&tp->napi, skb);
 
 			dev->stats.rx_bytes += pkt_size;
 			dev->stats.rx_packets++;
@@ -4755,6 +5025,7 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 			case RTL_GIGA_MAC_VER_24:
 			case RTL_GIGA_MAC_VER_27:
 			case RTL_GIGA_MAC_VER_28:
+			case RTL_GIGA_MAC_VER_31:
 			/* Experimental science. Pktgen proof. */
 			case RTL_GIGA_MAC_VER_12:
 			case RTL_GIGA_MAC_VER_25:
@@ -4847,7 +5118,7 @@ static void rtl8169_down(struct net_device *dev)
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
 
-	rtl8169_delete_timer(dev);
+	del_timer_sync(&tp->timer);
 
 	netif_stop_queue(dev);
 
@@ -4884,7 +5155,7 @@ static int rtl8169_close(struct net_device *dev)
 
 	pm_runtime_get_sync(&pdev->dev);
 
-	/* update counters before going down */
+	/* Update counters before going down */
 	rtl8169_update_counters(dev);
 
 	rtl8169_down(dev);
@@ -4939,7 +5210,7 @@ static void rtl_set_rx_mode(struct net_device *dev)
 	spin_lock_irqsave(&tp->lock, flags);
 
 	tmp = rtl8169_rx_config | rx_mode |
-	      (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+	      (RTL_R32(RxConfig) & RTL_RX_CONFIG_MASK);
 
 	if (tp->mac_version > RTL_GIGA_MAC_VER_06) {
 		u32 data = mc_filter[0];
@@ -5077,15 +5348,15 @@ static int rtl8169_runtime_idle(struct device *device)
 }
 
 static const struct dev_pm_ops rtl8169_pm_ops = {
-	.suspend = rtl8169_suspend,
-	.resume = rtl8169_resume,
-	.freeze = rtl8169_suspend,
-	.thaw = rtl8169_resume,
-	.poweroff = rtl8169_suspend,
-	.restore = rtl8169_resume,
-	.runtime_suspend = rtl8169_runtime_suspend,
-	.runtime_resume = rtl8169_runtime_resume,
-	.runtime_idle = rtl8169_runtime_idle,
+	.suspend		= rtl8169_suspend,
+	.resume			= rtl8169_resume,
+	.freeze			= rtl8169_suspend,
+	.thaw			= rtl8169_resume,
+	.poweroff		= rtl8169_suspend,
+	.restore		= rtl8169_resume,
+	.runtime_suspend	= rtl8169_runtime_suspend,
+	.runtime_resume		= rtl8169_runtime_resume,
+	.runtime_idle		= rtl8169_runtime_idle,
 };
 
 #define RTL8169_PM_OPS	(&rtl8169_pm_ops)
@@ -5104,7 +5375,7 @@ static void rtl_shutdown(struct pci_dev *pdev)
 
 	rtl8169_net_suspend(dev);
 
-	/* restore original MAC address */
+	/* Restore original MAC address */
 	rtl_rar_set(tp, dev->perm_addr);
 
 	spin_lock_irq(&tp->lock);
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 356e74d20b8..89cfee7e864 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2244,13 +2244,12 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
 static void fix_mac_address(struct s2io_nic *sp)
 {
 	struct XENA_dev_config __iomem *bar0 = sp->bar0;
-	u64 val64;
 	int i = 0;
 
 	while (fix_mac[i] != END_SIGN) {
 		writeq(fix_mac[i++], &bar0->gpio_control);
 		udelay(10);
-		val64 = readq(&bar0->gpio_control);
+		(void) readq(&bar0->gpio_control);
 	}
 }
 
@@ -2353,7 +2352,7 @@ static int start_nic(struct s2io_nic *nic)
 
 	if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
 		/*
-		 * Dont see link state interrupts initally on some switches,
+		 * Dont see link state interrupts initially on some switches,
 		 * so directly scheduling the link state task here.
 		 */
 		schedule_work(&nic->set_link_task);
@@ -2727,7 +2726,6 @@ static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
 	int j;
 	struct sk_buff *skb;
 	struct RxD_t *rxdp;
-	struct buffAdd *ba;
 	struct RxD1 *rxdp1;
 	struct RxD3 *rxdp3;
 	struct mac_info *mac_control = &sp->mac_control;
@@ -2751,7 +2749,6 @@ static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
 			memset(rxdp, 0, sizeof(struct RxD1));
 		} else if (sp->rxd_mode == RXD_MODE_3B) {
 			rxdp3 = (struct RxD3 *)rxdp;
-			ba = &mac_control->rings[ring_no].ba[blk][j];
 			pci_unmap_single(sp->pdev,
 					 (dma_addr_t)rxdp3->Buffer0_ptr,
 					 BUF0_LEN,
@@ -3563,7 +3560,7 @@ static void s2io_reset(struct s2io_nic *sp)
 	}
 
 	/*
-	 * Clear spurious ECC interrupts that would have occured on
+	 * Clear spurious ECC interrupts that would have occurred on
 	 * XFRAME II cards after reset.
 	 */
 	if (sp->device_type == XFRAME_II_DEVICE) {
@@ -4065,7 +4062,7 @@ static int s2io_close(struct net_device *dev)
  *  Description :
  *  This function is the Tx entry point of the driver. S2IO NIC supports
  *  certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
- *  NOTE: when device cant queue the pkt,just the trans_start variable will
+ *  NOTE: when device can't queue the pkt,just the trans_start variable will
  *  not be upadted.
  *  Return value:
  *  0 on success & 1 on failure.
@@ -5383,7 +5380,7 @@ static int s2io_ethtool_sset(struct net_device *dev,
 {
 	struct s2io_nic *sp = netdev_priv(dev);
 	if ((info->autoneg == AUTONEG_ENABLE) ||
-	    (info->speed != SPEED_10000) ||
+	    (ethtool_cmd_speed(info) != SPEED_10000) ||
 	    (info->duplex != DUPLEX_FULL))
 		return -EINVAL;
 	else {
@@ -5417,10 +5414,10 @@ static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
 	info->transceiver = XCVR_EXTERNAL;
 
 	if (netif_carrier_ok(sp->dev)) {
-		info->speed = 10000;
+		ethtool_cmd_speed_set(info, SPEED_10000);
 		info->duplex = DUPLEX_FULL;
 	} else {
-		info->speed = -1;
+		ethtool_cmd_speed_set(info, -1);
 		info->duplex = -1;
 	}
 
@@ -5484,83 +5481,79 @@ static void s2io_ethtool_gregs(struct net_device *dev,
 	}
 }
 
-/**
- *  s2io_phy_id  - timer function that alternates adapter LED.
- *  @data : address of the private member of the device structure, which
- *  is a pointer to the s2io_nic structure, provided as an u32.
- * Description: This is actually the timer function that alternates the
- * adapter LED bit of the adapter control bit to set/reset every time on
- * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
- *  once every second.
+/*
+ *  s2io_set_led - control NIC led
  */
-static void s2io_phy_id(unsigned long data)
+static void s2io_set_led(struct s2io_nic *sp, bool on)
 {
-	struct s2io_nic *sp = (struct s2io_nic *)data;
 	struct XENA_dev_config __iomem *bar0 = sp->bar0;
-	u64 val64 = 0;
-	u16 subid;
+	u16 subid = sp->pdev->subsystem_device;
+	u64 val64;
 
-	subid = sp->pdev->subsystem_device;
 	if ((sp->device_type == XFRAME_II_DEVICE) ||
 	    ((subid & 0xFF) >= 0x07)) {
 		val64 = readq(&bar0->gpio_control);
-		val64 ^= GPIO_CTRL_GPIO_0;
+		if (on)
+			val64 |= GPIO_CTRL_GPIO_0;
+		else
+			val64 &= ~GPIO_CTRL_GPIO_0;
+
 		writeq(val64, &bar0->gpio_control);
 	} else {
 		val64 = readq(&bar0->adapter_control);
-		val64 ^= ADAPTER_LED_ON;
+		if (on)
+			val64 |= ADAPTER_LED_ON;
+		else
+			val64 &= ~ADAPTER_LED_ON;
+
 		writeq(val64, &bar0->adapter_control);
 	}
 
-	mod_timer(&sp->id_timer, jiffies + HZ / 2);
 }
 
 /**
- * s2io_ethtool_idnic - To physically identify the nic on the system.
- * @sp : private member of the device structure, which is a pointer to the
- * s2io_nic structure.
- * @id : pointer to the structure with identification parameters given by
- * ethtool.
+ * s2io_ethtool_set_led - To physically identify the nic on the system.
+ * @dev : network device
+ * @state: led setting
+ *
  * Description: Used to physically identify the NIC on the system.
  * The Link LED will blink for a time specified by the user for
  * identification.
  * NOTE: The Link has to be Up to be able to blink the LED. Hence
  * identification is possible only if it's link is up.
- * Return value:
- * int , returns 0 on success
  */
 
-static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
+static int s2io_ethtool_set_led(struct net_device *dev,
+				enum ethtool_phys_id_state state)
 {
-	u64 val64 = 0, last_gpio_ctrl_val;
 	struct s2io_nic *sp = netdev_priv(dev);
 	struct XENA_dev_config __iomem *bar0 = sp->bar0;
-	u16 subid;
+	u16 subid = sp->pdev->subsystem_device;
 
-	subid = sp->pdev->subsystem_device;
-	last_gpio_ctrl_val = readq(&bar0->gpio_control);
 	if ((sp->device_type == XFRAME_I_DEVICE) && ((subid & 0xFF) < 0x07)) {
-		val64 = readq(&bar0->adapter_control);
+		u64 val64 = readq(&bar0->adapter_control);
 		if (!(val64 & ADAPTER_CNTL_EN)) {
 			pr_err("Adapter Link down, cannot blink LED\n");
-			return -EFAULT;
+			return -EAGAIN;
 		}
 	}
-	if (sp->id_timer.function == NULL) {
-		init_timer(&sp->id_timer);
-		sp->id_timer.function = s2io_phy_id;
-		sp->id_timer.data = (unsigned long)sp;
-	}
-	mod_timer(&sp->id_timer, jiffies);
-	if (data)
-		msleep_interruptible(data * HZ);
-	else
-		msleep_interruptible(MAX_FLICKER_TIME);
-	del_timer_sync(&sp->id_timer);
 
-	if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
-		writeq(last_gpio_ctrl_val, &bar0->gpio_control);
-		last_gpio_ctrl_val = readq(&bar0->gpio_control);
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		sp->adapt_ctrl_org = readq(&bar0->gpio_control);
+		return 1;	/* cycle on/off once per second */
+
+	case ETHTOOL_ID_ON:
+		s2io_set_led(sp, true);
+		break;
+
+	case ETHTOOL_ID_OFF:
+		s2io_set_led(sp, false);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid))
+			writeq(sp->adapt_ctrl_org, &bar0->gpio_control);
 	}
 
 	return 0;
@@ -6625,25 +6618,6 @@ static int s2io_ethtool_get_regs_len(struct net_device *dev)
 }
 
 
-static u32 s2io_ethtool_get_rx_csum(struct net_device *dev)
-{
-	struct s2io_nic *sp = netdev_priv(dev);
-
-	return sp->rx_csum;
-}
-
-static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct s2io_nic *sp = netdev_priv(dev);
-
-	if (data)
-		sp->rx_csum = 1;
-	else
-		sp->rx_csum = 0;
-
-	return 0;
-}
-
 static int s2io_get_eeprom_len(struct net_device *dev)
 {
 	return XENA_EEPROM_SPACE;
@@ -6695,61 +6669,27 @@ static void s2io_ethtool_get_strings(struct net_device *dev,
 	}
 }
 
-static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
-{
-	if (data)
-		dev->features |= NETIF_F_IP_CSUM;
-	else
-		dev->features &= ~NETIF_F_IP_CSUM;
-
-	return 0;
-}
-
-static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
-{
-	return (dev->features & NETIF_F_TSO) != 0;
-}
-
-static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
-{
-	if (data)
-		dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
-	else
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
-	return 0;
-}
-
-static int s2io_ethtool_set_flags(struct net_device *dev, u32 data)
+static int s2io_set_features(struct net_device *dev, u32 features)
 {
 	struct s2io_nic *sp = netdev_priv(dev);
-	int rc = 0;
-	int changed = 0;
-
-	if (ethtool_invalid_flags(dev, data, ETH_FLAG_LRO))
-		return -EINVAL;
-
-	if (data & ETH_FLAG_LRO) {
-		if (!(dev->features & NETIF_F_LRO)) {
-			dev->features |= NETIF_F_LRO;
-			changed = 1;
-		}
-	} else if (dev->features & NETIF_F_LRO) {
-		dev->features &= ~NETIF_F_LRO;
-		changed = 1;
-	}
+	u32 changed = (features ^ dev->features) & NETIF_F_LRO;
 
 	if (changed && netif_running(dev)) {
+		int rc;
+
 		s2io_stop_all_tx_queue(sp);
 		s2io_card_down(sp);
+		dev->features = features;
 		rc = s2io_card_up(sp);
 		if (rc)
 			s2io_reset(sp);
 		else
 			s2io_start_all_tx_queue(sp);
+
+		return rc ? rc : 1;
 	}
 
-	return rc;
+	return 0;
 }
 
 static const struct ethtool_ops netdev_ethtool_ops = {
@@ -6765,18 +6705,9 @@ static const struct ethtool_ops netdev_ethtool_ops = {
 	.get_ringparam = s2io_ethtool_gringparam,
 	.get_pauseparam = s2io_ethtool_getpause_data,
 	.set_pauseparam = s2io_ethtool_setpause_data,
-	.get_rx_csum = s2io_ethtool_get_rx_csum,
-	.set_rx_csum = s2io_ethtool_set_rx_csum,
-	.set_tx_csum = s2io_ethtool_op_set_tx_csum,
-	.set_flags = s2io_ethtool_set_flags,
-	.get_flags = ethtool_op_get_flags,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = s2io_ethtool_op_get_tso,
-	.set_tso = s2io_ethtool_op_set_tso,
-	.set_ufo = ethtool_op_set_ufo,
 	.self_test = s2io_ethtool_test,
 	.get_strings = s2io_ethtool_get_strings,
-	.phys_id = s2io_ethtool_idnic,
+	.set_phys_id = s2io_ethtool_set_led,
 	.get_ethtool_stats = s2io_get_ethtool_stats,
 	.get_sset_count = s2io_get_sset_count,
 };
@@ -7545,7 +7476,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
 	if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
 	    ((!ring_data->lro) ||
 	     (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
-	    (sp->rx_csum)) {
+	    (dev->features & NETIF_F_RXCSUM)) {
 		l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
 		l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
 		if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
@@ -7806,6 +7737,7 @@ static const struct net_device_ops s2io_netdev_ops = {
 	.ndo_do_ioctl	   	= s2io_ioctl,
 	.ndo_set_mac_address    = s2io_set_mac_addr,
 	.ndo_change_mtu	   	= s2io_change_mtu,
+	.ndo_set_features	= s2io_set_features,
 	.ndo_vlan_rx_register   = s2io_vlan_rx_register,
 	.ndo_vlan_rx_kill_vid   = s2io_vlan_rx_kill_vid,
 	.ndo_tx_timeout	   	= s2io_tx_watchdog,
@@ -8047,17 +7979,18 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	/*  Driver entry points */
 	dev->netdev_ops = &s2io_netdev_ops;
 	SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
-	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-	dev->features |= NETIF_F_LRO;
-	dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO6 |
+		NETIF_F_RXCSUM | NETIF_F_LRO;
+	dev->features |= dev->hw_features |
+		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+	if (sp->device_type & XFRAME_II_DEVICE) {
+		dev->hw_features |= NETIF_F_UFO;
+		if (ufo)
+			dev->features |= NETIF_F_UFO;
+	}
 	if (sp->high_dma_flag == true)
 		dev->features |= NETIF_F_HIGHDMA;
-	dev->features |= NETIF_F_TSO;
-	dev->features |= NETIF_F_TSO6;
-	if ((sp->device_type & XFRAME_II_DEVICE) && (ufo))  {
-		dev->features |= NETIF_F_UFO;
-		dev->features |= NETIF_F_HW_CSUM;
-	}
 	dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
 	INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
 	INIT_WORK(&sp->set_link_task, s2io_set_link);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 7d160306b65..800b3a44e65 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -376,7 +376,7 @@ static const u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7};
 /* Maintains Per FIFO related information. */
 struct tx_fifo_config {
 #define	MAX_AVAILABLE_TXDS	8192
-	u32 fifo_len;		/* specifies len of FIFO upto 8192, ie no of TxDLs */
+	u32 fifo_len;		/* specifies len of FIFO up to 8192, ie no of TxDLs */
 /* Priority definition */
 #define TX_FIFO_PRI_0               0	/*Highest */
 #define TX_FIFO_PRI_1               1
@@ -893,9 +893,6 @@ struct s2io_nic {
 	u16 all_multi_pos;
 	u16 promisc_flg;
 
-	/*  Id timer, used to blink NIC to physically identify NIC. */
-	struct timer_list id_timer;
-
 	/*  Restart timer, used to restart NIC if the device is stuck and
 	 *  a schedule task that will set the correct Link state once the
 	 *  NIC's PHY has stabilized after a state change.
@@ -1005,18 +1002,16 @@ static inline void writeq(u64 val, void __iomem *addr)
 #define LF	2
 static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order)
 {
-	u32 ret;
-
 	if (order == LF) {
 		writel((u32) (val), addr);
-		ret = readl(addr);
+		(void) readl(addr);
 		writel((u32) (val >> 32), (addr + 4));
-		ret = readl(addr + 4);
+		(void) readl(addr + 4);
 	} else {
 		writel((u32) (val >> 32), (addr + 4));
-		ret = readl(addr + 4);
+		(void) readl(addr + 4);
 		writel((u32) (val), addr);
-		ret = readl(addr);
+		(void) readl(addr);
 	}
 }
 
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 76290a8c3c1..fa74314ef78 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1173,7 +1173,8 @@ static int sc92031_ethtool_get_settings(struct net_device *dev,
 	if (phy_ctrl & PhyCtrlAne)
 		cmd->advertising |= ADVERTISED_Autoneg;
 
-	cmd->speed = (output_status & 0x2) ? SPEED_100 : SPEED_10;
+	ethtool_cmd_speed_set(cmd,
+			      (output_status & 0x2) ? SPEED_100 : SPEED_10);
 	cmd->duplex = (output_status & 0x4) ? DUPLEX_FULL : DUPLEX_HALF;
 	cmd->port = PORT_MII;
 	cmd->phy_address = phy_address;
@@ -1188,10 +1189,11 @@ static int sc92031_ethtool_set_settings(struct net_device *dev,
 {
 	struct sc92031_priv *priv = netdev_priv(dev);
 	void __iomem *port_base = priv->port_base;
+	u32 speed = ethtool_cmd_speed(cmd);
 	u32 phy_ctrl;
 	u32 old_phy_ctrl;
 
-	if (!(cmd->speed == SPEED_10 || cmd->speed == SPEED_100))
+	if (!(speed == SPEED_10 || speed == SPEED_100))
 		return -EINVAL;
 	if (!(cmd->duplex == DUPLEX_HALF || cmd->duplex == DUPLEX_FULL))
 		return -EINVAL;
@@ -1229,7 +1231,7 @@ static int sc92031_ethtool_set_settings(struct net_device *dev,
 		// FIXME: Whole branch guessed
 		phy_ctrl = 0;
 
-		if (cmd->speed == SPEED_10)
+		if (speed == SPEED_10)
 			phy_ctrl |= PhyCtrlSpd10;
 		else /* cmd->speed == SPEED_100 */
 			phy_ctrl |= PhyCtrlSpd100;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index d890679e4c4..c914729f955 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -328,7 +328,8 @@ static int efx_poll(struct napi_struct *napi, int budget)
  * processing to finish, then directly poll (and ack ) the eventq.
  * Finally reenable NAPI and interrupts.
  *
- * Since we are touching interrupts the caller should hold the suspend lock
+ * This is for use only during a loopback self-test.  It must not
+ * deliver any packets up the stack as this can result in deadlock.
  */
 void efx_process_channel_now(struct efx_channel *channel)
 {
@@ -336,6 +337,7 @@ void efx_process_channel_now(struct efx_channel *channel)
 
 	BUG_ON(channel->channel >= efx->n_channels);
 	BUG_ON(!channel->enabled);
+	BUG_ON(!efx->loopback_selftest);
 
 	/* Disable interrupts and wait for ISRs to complete */
 	efx_nic_disable_interrupts(efx);
@@ -796,11 +798,6 @@ void efx_link_status_changed(struct efx_nic *efx)
 	if (!netif_running(efx->net_dev))
 		return;
 
-	if (efx->port_inhibited) {
-		netif_carrier_off(efx->net_dev);
-		return;
-	}
-
 	if (link_state->up != netif_carrier_ok(efx->net_dev)) {
 		efx->n_link_state_changes++;
 
@@ -836,7 +833,7 @@ void efx_link_set_advertising(struct efx_nic *efx, u32 advertising)
 	}
 }
 
-void efx_link_set_wanted_fc(struct efx_nic *efx, enum efx_fc_type wanted_fc)
+void efx_link_set_wanted_fc(struct efx_nic *efx, u8 wanted_fc)
 {
 	efx->wanted_fc = wanted_fc;
 	if (efx->link_advertising) {
@@ -1317,8 +1314,20 @@ static void efx_remove_interrupts(struct efx_nic *efx)
 
 static void efx_set_channels(struct efx_nic *efx)
 {
+	struct efx_channel *channel;
+	struct efx_tx_queue *tx_queue;
+
 	efx->tx_channel_offset =
 		separate_tx_channels ? efx->n_channels - efx->n_tx_channels : 0;
+
+	/* We need to adjust the TX queue numbers if we have separate
+	 * RX-only and TX-only channels.
+	 */
+	efx_for_each_channel(channel, efx) {
+		efx_for_each_channel_tx_queue(tx_queue, channel)
+			tx_queue->queue -= (efx->tx_channel_offset *
+					    EFX_TXQ_TYPES);
+	}
 }
 
 static int efx_probe_nic(struct efx_nic *efx)
@@ -1436,7 +1445,7 @@ static void efx_start_all(struct efx_nic *efx)
 	 * restart the transmit interface early so the watchdog timer stops */
 	efx_start_port(efx);
 
-	if (efx_dev_registered(efx))
+	if (efx_dev_registered(efx) && netif_device_present(efx->net_dev))
 		netif_tx_wake_all_queues(efx->net_dev);
 
 	efx_for_each_channel(channel, efx)
@@ -1874,6 +1883,17 @@ static void efx_set_multicast_list(struct net_device *net_dev)
 	/* Otherwise efx_start_port() will do this */
 }
 
+static int efx_set_features(struct net_device *net_dev, u32 data)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+
+	/* If disabling RX n-tuple filtering, clear existing filters */
+	if (net_dev->features & ~data & NETIF_F_NTUPLE)
+		efx_filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
+
+	return 0;
+}
+
 static const struct net_device_ops efx_netdev_ops = {
 	.ndo_open		= efx_net_open,
 	.ndo_stop		= efx_net_stop,
@@ -1885,6 +1905,7 @@ static const struct net_device_ops efx_netdev_ops = {
 	.ndo_change_mtu		= efx_change_mtu,
 	.ndo_set_mac_address	= efx_set_mac_address,
 	.ndo_set_multicast_list = efx_set_multicast_list,
+	.ndo_set_features	= efx_set_features,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = efx_netpoll,
 #endif
@@ -2088,6 +2109,7 @@ int efx_reset(struct efx_nic *efx, enum reset_type method)
 	netif_info(efx, drv, efx->net_dev, "resetting (%s)\n",
 		   RESET_TYPE(method));
 
+	netif_device_detach(efx->net_dev);
 	efx_reset_down(efx, method);
 
 	rc = efx->type->reset(efx, method);
@@ -2121,6 +2143,7 @@ out:
 		efx->state = STATE_DISABLED;
 	} else {
 		netif_dbg(efx, drv, efx->net_dev, "reset complete\n");
+		netif_device_attach(efx->net_dev);
 	}
 	return rc;
 }
@@ -2233,7 +2256,7 @@ static bool efx_port_dummy_op_poll(struct efx_nic *efx)
 	return false;
 }
 
-static struct efx_phy_operations efx_dummy_phy_operations = {
+static const struct efx_phy_operations efx_dummy_phy_operations = {
 	.init		 = efx_port_dummy_op_int,
 	.reconfigure	 = efx_port_dummy_op_int,
 	.poll		 = efx_port_dummy_op_poll,
@@ -2249,7 +2272,7 @@ static struct efx_phy_operations efx_dummy_phy_operations = {
 /* This zeroes out and then fills in the invariants in a struct
  * efx_nic (including all sub-structures).
  */
-static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
+static int efx_init_struct(struct efx_nic *efx, const struct efx_nic_type *type,
 			   struct pci_dev *pci_dev, struct net_device *net_dev)
 {
 	int i;
@@ -2269,7 +2292,6 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
 	strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
 
 	efx->net_dev = net_dev;
-	efx->rx_checksum_enabled = true;
 	spin_lock_init(&efx->stats_lock);
 	mutex_init(&efx->mac_lock);
 	efx->mac_op = type->default_mac_ops;
@@ -2440,7 +2462,7 @@ static int efx_pci_probe_main(struct efx_nic *efx)
 static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
 				   const struct pci_device_id *entry)
 {
-	struct efx_nic_type *type = (struct efx_nic_type *) entry->driver_data;
+	const struct efx_nic_type *type = (const struct efx_nic_type *) entry->driver_data;
 	struct net_device *net_dev;
 	struct efx_nic *efx;
 	int i, rc;
@@ -2452,12 +2474,15 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
 		return -ENOMEM;
 	net_dev->features |= (type->offload_features | NETIF_F_SG |
 			      NETIF_F_HIGHDMA | NETIF_F_TSO |
-			      NETIF_F_GRO);
+			      NETIF_F_RXCSUM);
 	if (type->offload_features & NETIF_F_V6_CSUM)
 		net_dev->features |= NETIF_F_TSO6;
 	/* Mask for features that also apply to VLAN devices */
 	net_dev->vlan_features |= (NETIF_F_ALL_CSUM | NETIF_F_SG |
-				   NETIF_F_HIGHDMA | NETIF_F_TSO);
+				   NETIF_F_HIGHDMA | NETIF_F_ALL_TSO |
+				   NETIF_F_RXCSUM);
+	/* All offloads can be toggled */
+	net_dev->hw_features = net_dev->features & ~NETIF_F_HIGHDMA;
 	efx = netdev_priv(net_dev);
 	pci_set_drvdata(pci_dev, efx);
 	SET_NETDEV_DEV(net_dev, &pci_dev->dev);
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index 3d83a1f74fe..b0d1209ea18 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -142,6 +142,6 @@ static inline void efx_schedule_channel(struct efx_channel *channel)
 
 extern void efx_link_status_changed(struct efx_nic *efx);
 extern void efx_link_set_advertising(struct efx_nic *efx, u32);
-extern void efx_link_set_wanted_fc(struct efx_nic *efx, enum efx_fc_type);
+extern void efx_link_set_wanted_fc(struct efx_nic *efx, u8);
 
 #endif /* EFX_EFX_H */
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 807178ef65a..d229027dc36 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -178,19 +178,27 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = {
  */
 
 /* Identify device by flashing LEDs */
-static int efx_ethtool_phys_id(struct net_device *net_dev, u32 count)
+static int efx_ethtool_phys_id(struct net_device *net_dev,
+			       enum ethtool_phys_id_state state)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	enum efx_led_mode mode = EFX_LED_DEFAULT;
 
-	do {
-		efx->type->set_id_led(efx, EFX_LED_ON);
-		schedule_timeout_interruptible(HZ / 2);
-
-		efx->type->set_id_led(efx, EFX_LED_OFF);
-		schedule_timeout_interruptible(HZ / 2);
-	} while (!signal_pending(current) && --count != 0);
+	switch (state) {
+	case ETHTOOL_ID_ON:
+		mode = EFX_LED_ON;
+		break;
+	case ETHTOOL_ID_OFF:
+		mode = EFX_LED_OFF;
+		break;
+	case ETHTOOL_ID_INACTIVE:
+		mode = EFX_LED_DEFAULT;
+		break;
+	case ETHTOOL_ID_ACTIVE:
+		return 1;	/* cycle on/off once per second */
+	}
 
-	efx->type->set_id_led(efx, EFX_LED_DEFAULT);
+	efx->type->set_id_led(efx, mode);
 	return 0;
 }
 
@@ -211,7 +219,7 @@ static int efx_ethtool_get_settings(struct net_device *net_dev,
 	ecmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
 
 	if (LOOPBACK_INTERNAL(efx)) {
-		ecmd->speed = link_state->speed;
+		ethtool_cmd_speed_set(ecmd, link_state->speed);
 		ecmd->duplex = link_state->fd ? DUPLEX_FULL : DUPLEX_HALF;
 	}
 
@@ -226,7 +234,8 @@ static int efx_ethtool_set_settings(struct net_device *net_dev,
 	int rc;
 
 	/* GMAC does not support 1000Mbps HD */
-	if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) {
+	if ((ethtool_cmd_speed(ecmd) == SPEED_1000) &&
+	    (ecmd->duplex != DUPLEX_FULL)) {
 		netif_dbg(efx, drv, efx->net_dev,
 			  "rejecting unsupported 1000Mbps HD setting\n");
 		return -EINVAL;
@@ -518,72 +527,6 @@ static void efx_ethtool_get_stats(struct net_device *net_dev,
 	}
 }
 
-static int efx_ethtool_set_tso(struct net_device *net_dev, u32 enable)
-{
-	struct efx_nic *efx __attribute__ ((unused)) = netdev_priv(net_dev);
-	u32 features;
-
-	features = NETIF_F_TSO;
-	if (efx->type->offload_features & NETIF_F_V6_CSUM)
-		features |= NETIF_F_TSO6;
-
-	if (enable)
-		net_dev->features |= features;
-	else
-		net_dev->features &= ~features;
-
-	return 0;
-}
-
-static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-	u32 features = efx->type->offload_features & NETIF_F_ALL_CSUM;
-
-	if (enable)
-		net_dev->features |= features;
-	else
-		net_dev->features &= ~features;
-
-	return 0;
-}
-
-static int efx_ethtool_set_rx_csum(struct net_device *net_dev, u32 enable)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-
-	/* No way to stop the hardware doing the checks; we just
-	 * ignore the result.
-	 */
-	efx->rx_checksum_enabled = !!enable;
-
-	return 0;
-}
-
-static u32 efx_ethtool_get_rx_csum(struct net_device *net_dev)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-
-	return efx->rx_checksum_enabled;
-}
-
-static int efx_ethtool_set_flags(struct net_device *net_dev, u32 data)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-	u32 supported = (efx->type->offload_features &
-			 (ETH_FLAG_RXHASH | ETH_FLAG_NTUPLE));
-	int rc;
-
-	rc = ethtool_op_set_flags(net_dev, data, supported);
-	if (rc)
-		return rc;
-
-	if (!(data & ETH_FLAG_NTUPLE))
-		efx_filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
-
-	return 0;
-}
-
 static void efx_ethtool_self_test(struct net_device *net_dev,
 				  struct ethtool_test *test, u64 *data)
 {
@@ -755,7 +698,7 @@ static int efx_ethtool_set_pauseparam(struct net_device *net_dev,
 				      struct ethtool_pauseparam *pause)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	enum efx_fc_type wanted_fc, old_fc;
+	u8 wanted_fc, old_fc;
 	u32 old_adv;
 	bool reset;
 	int rc = 0;
@@ -1012,8 +955,9 @@ static int efx_ethtool_set_rx_ntuple(struct net_device *net_dev,
 
 	if (ntuple->fs.action == ETHTOOL_RXNTUPLE_ACTION_CLEAR)
 		return efx_filter_remove_filter(efx, &filter);
-	else
-		return efx_filter_insert_filter(efx, &filter, true);
+
+	rc = efx_filter_insert_filter(efx, &filter, true);
+	return rc < 0 ? rc : 0;
 }
 
 static int efx_ethtool_get_rxfh_indir(struct net_device *net_dev,
@@ -1070,22 +1014,10 @@ const struct ethtool_ops efx_ethtool_ops = {
 	.set_ringparam		= efx_ethtool_set_ringparam,
 	.get_pauseparam         = efx_ethtool_get_pauseparam,
 	.set_pauseparam         = efx_ethtool_set_pauseparam,
-	.get_rx_csum		= efx_ethtool_get_rx_csum,
-	.set_rx_csum		= efx_ethtool_set_rx_csum,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	/* Need to enable/disable IPv6 too */
-	.set_tx_csum		= efx_ethtool_set_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
-	.get_tso		= ethtool_op_get_tso,
-	/* Need to enable/disable TSO-IPv6 too */
-	.set_tso		= efx_ethtool_set_tso,
-	.get_flags		= ethtool_op_get_flags,
-	.set_flags		= efx_ethtool_set_flags,
 	.get_sset_count		= efx_ethtool_get_sset_count,
 	.self_test		= efx_ethtool_self_test,
 	.get_strings		= efx_ethtool_get_strings,
-	.phys_id		= efx_ethtool_phys_id,
+	.set_phys_id		= efx_ethtool_phys_id,
 	.get_ethtool_stats	= efx_ethtool_get_stats,
 	.get_wol                = efx_ethtool_get_wol,
 	.set_wol                = efx_ethtool_set_wol,
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 734fcfb52e8..60176e873d6 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -692,7 +692,7 @@ static int falcon_gmii_wait(struct efx_nic *efx)
 	efx_oword_t md_stat;
 	int count;
 
-	/* wait upto 50ms - taken max from datasheet */
+	/* wait up to 50ms - taken max from datasheet */
 	for (count = 0; count < 5000; count++) {
 		efx_reado(efx, &md_stat, FR_AB_MD_STAT);
 		if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) {
@@ -1221,7 +1221,7 @@ static int falcon_reset_sram(struct efx_nic *efx)
 
 			return 0;
 		}
-	} while (++count < 20);	/* wait upto 0.4 sec */
+	} while (++count < 20);	/* wait up to 0.4 sec */
 
 	netif_err(efx, hw, efx->net_dev, "timed out waiting for SRAM reset\n");
 	return -ETIMEDOUT;
@@ -1703,7 +1703,7 @@ static int falcon_set_wol(struct efx_nic *efx, u32 type)
  **************************************************************************
  */
 
-struct efx_nic_type falcon_a1_nic_type = {
+const struct efx_nic_type falcon_a1_nic_type = {
 	.probe = falcon_probe_nic,
 	.remove = falcon_remove_nic,
 	.init = falcon_init_nic,
@@ -1744,7 +1744,7 @@ struct efx_nic_type falcon_a1_nic_type = {
 	.reset_world_flags = ETH_RESET_IRQ,
 };
 
-struct efx_nic_type falcon_b0_nic_type = {
+const struct efx_nic_type falcon_b0_nic_type = {
 	.probe = falcon_probe_nic,
 	.remove = falcon_remove_nic,
 	.init = falcon_init_nic,
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index 2c9ee5db3bf..9516452c079 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -362,7 +362,7 @@ void falcon_poll_xmac(struct efx_nic *efx)
 	falcon_ack_status_intr(efx);
 }
 
-struct efx_mac_operations falcon_xmac_operations = {
+const struct efx_mac_operations falcon_xmac_operations = {
 	.reconfigure	= falcon_reconfigure_xmac,
 	.update_stats	= falcon_update_stats_xmac,
 	.check_fault	= falcon_xmac_check_fault,
diff --git a/drivers/net/sfc/io.h b/drivers/net/sfc/io.h
index d9d8c2ef107..cc978803d48 100644
--- a/drivers/net/sfc/io.h
+++ b/drivers/net/sfc/io.h
@@ -152,6 +152,7 @@ static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value,
 
 	spin_lock_irqsave(&efx->biu_lock, flags);
 	value->u32[0] = _efx_readd(efx, reg + 0);
+	rmb();
 	value->u32[1] = _efx_readd(efx, reg + 4);
 	value->u32[2] = _efx_readd(efx, reg + 8);
 	value->u32[3] = _efx_readd(efx, reg + 12);
@@ -174,6 +175,7 @@ static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase,
 	value->u64[0] = (__force __le64)__raw_readq(membase + addr);
 #else
 	value->u32[0] = (__force __le32)__raw_readl(membase + addr);
+	rmb();
 	value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4);
 #endif
 	spin_unlock_irqrestore(&efx->biu_lock, flags);
diff --git a/drivers/net/sfc/mac.h b/drivers/net/sfc/mac.h
index 6886cdf87c1..d6a255d0856 100644
--- a/drivers/net/sfc/mac.h
+++ b/drivers/net/sfc/mac.h
@@ -13,8 +13,8 @@
 
 #include "net_driver.h"
 
-extern struct efx_mac_operations falcon_xmac_operations;
-extern struct efx_mac_operations efx_mcdi_mac_operations;
+extern const struct efx_mac_operations falcon_xmac_operations;
+extern const struct efx_mac_operations efx_mcdi_mac_operations;
 extern int efx_mcdi_mac_stats(struct efx_nic *efx, dma_addr_t dma_addr,
 			      u32 dma_len, int enable, int clear);
 
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 5e118f0d247..3dd45ed61f0 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -50,6 +50,20 @@ static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
 	return &nic_data->mcdi;
 }
 
+static inline void
+efx_mcdi_readd(struct efx_nic *efx, efx_dword_t *value, unsigned reg)
+{
+	struct siena_nic_data *nic_data = efx->nic_data;
+	value->u32[0] = (__force __le32)__raw_readl(nic_data->mcdi_smem + reg);
+}
+
+static inline void
+efx_mcdi_writed(struct efx_nic *efx, const efx_dword_t *value, unsigned reg)
+{
+	struct siena_nic_data *nic_data = efx->nic_data;
+	__raw_writel((__force u32)value->u32[0], nic_data->mcdi_smem + reg);
+}
+
 void efx_mcdi_init(struct efx_nic *efx)
 {
 	struct efx_mcdi_iface *mcdi;
@@ -70,8 +84,8 @@ static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd,
 			    const u8 *inbuf, size_t inlen)
 {
 	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
-	unsigned pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
-	unsigned doorbell = FR_CZ_MC_TREG_SMEM + MCDI_DOORBELL(efx);
+	unsigned pdu = MCDI_PDU(efx);
+	unsigned doorbell = MCDI_DOORBELL(efx);
 	unsigned int i;
 	efx_dword_t hdr;
 	u32 xflags, seqno;
@@ -92,30 +106,28 @@ static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd,
 			     MCDI_HEADER_SEQ, seqno,
 			     MCDI_HEADER_XFLAGS, xflags);
 
-	efx_writed(efx, &hdr, pdu);
+	efx_mcdi_writed(efx, &hdr, pdu);
 
-	for (i = 0; i < inlen; i += 4) {
-		_efx_writed(efx, *((__le32 *)(inbuf + i)), pdu + 4 + i);
-		/* use wmb() within loop to inhibit write combining */
-		wmb();
-	}
+	for (i = 0; i < inlen; i += 4)
+		efx_mcdi_writed(efx, (const efx_dword_t *)(inbuf + i),
+				pdu + 4 + i);
 
 	/* ring the doorbell with a distinctive value */
-	_efx_writed(efx, (__force __le32) 0x45789abc, doorbell);
-	wmb();
+	EFX_POPULATE_DWORD_1(hdr, EFX_DWORD_0, 0x45789abc);
+	efx_mcdi_writed(efx, &hdr, doorbell);
 }
 
 static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen)
 {
 	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
-	unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+	unsigned int pdu = MCDI_PDU(efx);
 	int i;
 
 	BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT);
 	BUG_ON(outlen & 3 || outlen >= 0x100);
 
 	for (i = 0; i < outlen; i += 4)
-		*((__le32 *)(outbuf + i)) = _efx_readd(efx, pdu + 4 + i);
+		efx_mcdi_readd(efx, (efx_dword_t *)(outbuf + i), pdu + 4 + i);
 }
 
 static int efx_mcdi_poll(struct efx_nic *efx)
@@ -123,7 +135,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
 	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
 	unsigned int time, finish;
 	unsigned int respseq, respcmd, error;
-	unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+	unsigned int pdu = MCDI_PDU(efx);
 	unsigned int rc, spins;
 	efx_dword_t reg;
 
@@ -149,8 +161,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
 
 		time = get_seconds();
 
-		rmb();
-		efx_readd(efx, &reg, pdu);
+		efx_mcdi_readd(efx, &reg, pdu);
 
 		/* All 1's indicates that shared memory is in reset (and is
 		 * not a valid header). Wait for it to come out reset before
@@ -177,7 +188,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
 			  respseq, mcdi->seqno);
 		rc = EIO;
 	} else if (error) {
-		efx_readd(efx, &reg, pdu + 4);
+		efx_mcdi_readd(efx, &reg, pdu + 4);
 		switch (EFX_DWORD_FIELD(reg, EFX_DWORD_0)) {
 #define TRANSLATE_ERROR(name)					\
 		case MC_CMD_ERR_ ## name:			\
@@ -211,21 +222,21 @@ out:
 /* Test and clear MC-rebooted flag for this port/function */
 int efx_mcdi_poll_reboot(struct efx_nic *efx)
 {
-	unsigned int addr = FR_CZ_MC_TREG_SMEM + MCDI_REBOOT_FLAG(efx);
+	unsigned int addr = MCDI_REBOOT_FLAG(efx);
 	efx_dword_t reg;
 	uint32_t value;
 
 	if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
 		return false;
 
-	efx_readd(efx, &reg, addr);
+	efx_mcdi_readd(efx, &reg, addr);
 	value = EFX_DWORD_FIELD(reg, EFX_DWORD_0);
 
 	if (value == 0)
 		return 0;
 
 	EFX_ZERO_DWORD(reg);
-	efx_writed(efx, &reg, addr);
+	efx_mcdi_writed(efx, &reg, addr);
 
 	if (value == MC_STATUS_DWORD_ASSERT)
 		return -EINTR;
@@ -453,7 +464,7 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc)
 	 *
 	 * There's a race here with efx_mcdi_rpc(), because we might receive
 	 * a REBOOT event *before* the request has been copied out. In polled
-	 * mode (during startup) this is irrelevent, because efx_mcdi_complete()
+	 * mode (during startup) this is irrelevant, because efx_mcdi_complete()
 	 * is ignored. In event mode, this condition is just an edge-case of
 	 * receiving a REBOOT event after posting the MCDI request. Did the mc
 	 * reboot before or after the copyout? The best we can do always is
diff --git a/drivers/net/sfc/mcdi_mac.c b/drivers/net/sfc/mcdi_mac.c
index 33f7294edb4..50c20777a56 100644
--- a/drivers/net/sfc/mcdi_mac.c
+++ b/drivers/net/sfc/mcdi_mac.c
@@ -138,7 +138,7 @@ static bool efx_mcdi_mac_check_fault(struct efx_nic *efx)
 }
 
 
-struct efx_mac_operations efx_mcdi_mac_operations = {
+const struct efx_mac_operations efx_mcdi_mac_operations = {
 	.reconfigure	= efx_mcdi_mac_reconfigure,
 	.update_stats	= efx_port_dummy_op_void,
 	.check_fault 	= efx_mcdi_mac_check_fault,
diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h
index b86a15f221a..41fe06fa060 100644
--- a/drivers/net/sfc/mcdi_pcol.h
+++ b/drivers/net/sfc/mcdi_pcol.h
@@ -103,7 +103,7 @@
  *
  * If Code==CMDDONE, then the fields are further interpreted as:
  *
- *   - LEVEL==INFO    Command succeded
+ *   - LEVEL==INFO    Command succeeded
  *   - LEVEL==ERR     Command failed
  *
  *    0     8         16      24     32
@@ -572,7 +572,7 @@
   (4*(_numwords))
 
 /* MC_CMD_SET_RAND_SEED:
- * Set the 16byte seed for the MC psuedo-random generator
+ * Set the 16byte seed for the MC pseudo-random generator
  */
 #define MC_CMD_SET_RAND_SEED 0x1a
 #define MC_CMD_SET_RAND_SEED_IN_LEN 16
@@ -1162,7 +1162,7 @@
 #define MC_CMD_MAC_STATS_CMD_CLEAR_WIDTH 1
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_LBN 2
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_WIDTH 1
-/* Remaining PERIOD* fields only relevent when PERIODIC_CHANGE is set */
+/* Remaining PERIOD* fields only relevant when PERIODIC_CHANGE is set */
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_LBN 3
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_WIDTH 1
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_LBN 4
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
index ec3f740f546..6c63ab0710a 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -449,7 +449,7 @@ void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa)
 	struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
 	u32 rmtadv;
 
-	/* The link partner capabilities are only relevent if the
+	/* The link partner capabilities are only relevant if the
 	 * link supports flow control autonegotiation */
 	if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN))
 		return;
@@ -513,7 +513,7 @@ static void efx_mcdi_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *e
 	ecmd->supported =
 		mcdi_to_ethtool_cap(phy_cfg->media, phy_cfg->supported_cap);
 	ecmd->advertising = efx->link_advertising;
-	ecmd->speed = efx->link_state.speed;
+	ethtool_cmd_speed_set(ecmd, efx->link_state.speed);
 	ecmd->duplex = efx->link_state.fd;
 	ecmd->port = mcdi_to_ethtool_media(phy_cfg->media);
 	ecmd->phy_address = phy_cfg->port;
@@ -545,7 +545,7 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec
 		caps = (ethtool_to_mcdi_cap(ecmd->advertising) |
 			 1 << MC_CMD_PHY_CAP_AN_LBN);
 	} else if (ecmd->duplex) {
-		switch (ecmd->speed) {
+		switch (ethtool_cmd_speed(ecmd)) {
 		case 10:    caps = 1 << MC_CMD_PHY_CAP_10FDX_LBN;    break;
 		case 100:   caps = 1 << MC_CMD_PHY_CAP_100FDX_LBN;   break;
 		case 1000:  caps = 1 << MC_CMD_PHY_CAP_1000FDX_LBN;  break;
@@ -553,7 +553,7 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec
 		default:    return -EINVAL;
 		}
 	} else {
-		switch (ecmd->speed) {
+		switch (ethtool_cmd_speed(ecmd)) {
 		case 10:    caps = 1 << MC_CMD_PHY_CAP_10HDX_LBN;    break;
 		case 100:   caps = 1 << MC_CMD_PHY_CAP_100HDX_LBN;   break;
 		case 1000:  caps = 1 << MC_CMD_PHY_CAP_1000HDX_LBN;  break;
@@ -739,7 +739,7 @@ static const char *efx_mcdi_phy_test_name(struct efx_nic *efx,
 	return NULL;
 }
 
-struct efx_phy_operations efx_mcdi_phy_ops = {
+const struct efx_phy_operations efx_mcdi_phy_ops = {
 	.probe		= efx_mcdi_phy_probe,
 	.init 	 	= efx_port_dummy_op_int,
 	.reconfigure	= efx_mcdi_phy_reconfigure,
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 19e68c26d10..7ab385c8136 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -232,12 +232,12 @@ void efx_mdio_set_mmds_lpower(struct efx_nic *efx,
  */
 int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	struct ethtool_cmd prev;
+	struct ethtool_cmd prev = { .cmd = ETHTOOL_GSET };
 
 	efx->phy_op->get_settings(efx, &prev);
 
 	if (ecmd->advertising == prev.advertising &&
-	    ecmd->speed == prev.speed &&
+	    ethtool_cmd_speed(ecmd) == ethtool_cmd_speed(&prev) &&
 	    ecmd->duplex == prev.duplex &&
 	    ecmd->port == prev.port &&
 	    ecmd->autoneg == prev.autoneg)
@@ -284,7 +284,7 @@ void efx_mdio_an_reconfigure(struct efx_nic *efx)
 	efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
 }
 
-enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx)
+u8 efx_mdio_get_pause(struct efx_nic *efx)
 {
 	BUILD_BUG_ON(EFX_FC_AUTO & (EFX_FC_RX | EFX_FC_TX));
 
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index df0703940c8..a97dbbd2de9 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -92,7 +92,7 @@ extern void efx_mdio_an_reconfigure(struct efx_nic *efx);
 /* Get pause parameters from AN if available (otherwise return
  * requested pause parameters)
  */
-enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx);
+u8 efx_mdio_get_pause(struct efx_nic *efx);
 
 /* Wait for specified MMDs to exit reset within a timeout */
 extern int efx_mdio_wait_reset_mmds(struct efx_nic *efx,
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 215d5c51bfa..e8d5f03a89f 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -330,7 +330,6 @@ enum efx_rx_alloc_method {
  * @eventq_mask: Event queue pointer mask
  * @eventq_read_ptr: Event queue read pointer
  * @last_eventq_read_ptr: Last event queue read pointer value.
- * @magic_count: Event queue test event count
  * @irq_count: Number of IRQs since last adaptive moderation decision
  * @irq_mod_score: IRQ moderation score
  * @rx_alloc_level: Watermark based heuristic counter for pushing descriptors
@@ -360,7 +359,6 @@ struct efx_channel {
 	unsigned int eventq_mask;
 	unsigned int eventq_read_ptr;
 	unsigned int last_eventq_read_ptr;
-	unsigned int magic_count;
 
 	unsigned int irq_count;
 	unsigned int irq_mod_score;
@@ -451,11 +449,9 @@ enum nic_state {
 struct efx_nic;
 
 /* Pseudo bit-mask flow control field */
-enum efx_fc_type {
-	EFX_FC_RX = FLOW_CTRL_RX,
-	EFX_FC_TX = FLOW_CTRL_TX,
-	EFX_FC_AUTO = 4,
-};
+#define EFX_FC_RX	FLOW_CTRL_RX
+#define EFX_FC_TX	FLOW_CTRL_TX
+#define EFX_FC_AUTO	4
 
 /**
  * struct efx_link_state - Current state of the link
@@ -467,7 +463,7 @@ enum efx_fc_type {
 struct efx_link_state {
 	bool up;
 	bool fd;
-	enum efx_fc_type fc;
+	u8 fc;
 	unsigned int speed;
 };
 
@@ -670,18 +666,16 @@ struct efx_filter_state;
  * @irq_zero_count: Number of legacy IRQs seen with queue flags == 0
  * @fatal_irq_level: IRQ level (bit number) used for serious errors
  * @mtd_list: List of MTDs attached to the NIC
- * @nic_data: Hardware dependant state
+ * @nic_data: Hardware dependent state
  * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
- *	@port_inhibited, efx_monitor() and efx_reconfigure_port()
+ *	efx_monitor() and efx_reconfigure_port()
  * @port_enabled: Port enabled indicator.
  *	Serialises efx_stop_all(), efx_start_all(), efx_monitor() and
  *	efx_mac_work() with kernel interfaces. Safe to read under any
  *	one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must
  *	be held to modify it.
- * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
  * @port_initialized: Port initialized?
  * @net_dev: Operating system network device. Consider holding the rtnl lock
- * @rx_checksum_enabled: RX checksumming enabled
  * @stats_buffer: DMA buffer for statistics
  * @mac_op: MAC interface
  * @phy_type: PHY type
@@ -767,18 +761,16 @@ struct efx_nic {
 	struct mutex mac_lock;
 	struct work_struct mac_work;
 	bool port_enabled;
-	bool port_inhibited;
 
 	bool port_initialized;
 	struct net_device *net_dev;
-	bool rx_checksum_enabled;
 
 	struct efx_buffer stats_buffer;
 
-	struct efx_mac_operations *mac_op;
+	const struct efx_mac_operations *mac_op;
 
 	unsigned int phy_type;
-	struct efx_phy_operations *phy_op;
+	const struct efx_phy_operations *phy_op;
 	void *phy_data;
 	struct mdio_if_info mdio;
 	unsigned int mdio_bus;
@@ -790,7 +782,7 @@ struct efx_nic {
 
 	bool promiscuous;
 	union efx_multicast_hash multicast_hash;
-	enum efx_fc_type wanted_fc;
+	u8 wanted_fc;
 
 	atomic_t rx_reset;
 	enum efx_loopback_mode loopback_mode;
@@ -899,7 +891,7 @@ struct efx_nic_type {
 	void (*resume_wol)(struct efx_nic *efx);
 	int (*test_registers)(struct efx_nic *efx);
 	int (*test_nvram)(struct efx_nic *efx);
-	struct efx_mac_operations *default_mac_ops;
+	const struct efx_mac_operations *default_mac_ops;
 
 	int revision;
 	unsigned int mem_map_size;
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index e8396614daf..f2a2b947f86 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -84,7 +84,8 @@ static inline void efx_write_buf_tbl(struct efx_nic *efx, efx_qword_t *value,
 static inline efx_qword_t *efx_event(struct efx_channel *channel,
 				     unsigned int index)
 {
-	return ((efx_qword_t *) (channel->eventq.addr)) + index;
+	return ((efx_qword_t *) (channel->eventq.addr)) +
+		(index & channel->eventq_mask);
 }
 
 /* See if an event is present
@@ -673,7 +674,8 @@ void efx_nic_eventq_read_ack(struct efx_channel *channel)
 	efx_dword_t reg;
 	struct efx_nic *efx = channel->efx;
 
-	EFX_POPULATE_DWORD_1(reg, FRF_AZ_EVQ_RPTR, channel->eventq_read_ptr);
+	EFX_POPULATE_DWORD_1(reg, FRF_AZ_EVQ_RPTR,
+			     channel->eventq_read_ptr & channel->eventq_mask);
 	efx_writed_table(efx, &reg, efx->type->evq_rptr_tbl_base,
 			 channel->channel);
 }
@@ -850,7 +852,6 @@ efx_handle_rx_event(struct efx_channel *channel, const efx_qword_t *event)
 	unsigned expected_ptr;
 	bool rx_ev_pkt_ok, discard = false, checksummed;
 	struct efx_rx_queue *rx_queue;
-	struct efx_nic *efx = channel->efx;
 
 	/* Basic packet information */
 	rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_BYTE_CNT);
@@ -873,9 +874,8 @@ efx_handle_rx_event(struct efx_channel *channel, const efx_qword_t *event)
 		 * UDP/IP, then we can rely on the hardware checksum.
 		 */
 		checksummed =
-			likely(efx->rx_checksum_enabled) &&
-			(rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP ||
-			 rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP);
+			rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP ||
+			rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP;
 	} else {
 		efx_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok, &discard);
 		checksummed = false;
@@ -908,7 +908,7 @@ efx_handle_generated_event(struct efx_channel *channel, efx_qword_t *event)
 
 	code = EFX_QWORD_FIELD(*event, FSF_AZ_DRV_GEN_EV_MAGIC);
 	if (code == EFX_CHANNEL_MAGIC_TEST(channel))
-		++channel->magic_count;
+		; /* ignore */
 	else if (code == EFX_CHANNEL_MAGIC_FILL(channel))
 		/* The queue must be empty, so we won't receive any rx
 		 * events, so efx_process_channel() won't refill the
@@ -1015,8 +1015,7 @@ int efx_nic_process_eventq(struct efx_channel *channel, int budget)
 		/* Clear this event by marking it all ones */
 		EFX_SET_QWORD(*p_event);
 
-		/* Increment read pointer */
-		read_ptr = (read_ptr + 1) & channel->eventq_mask;
+		++read_ptr;
 
 		ev_code = EFX_QWORD_FIELD(event, FSF_AZ_EV_CODE);
 
@@ -1060,6 +1059,13 @@ out:
 	return spent;
 }
 
+/* Check whether an event is present in the eventq at the current
+ * read pointer.  Only useful for self-test.
+ */
+bool efx_nic_event_present(struct efx_channel *channel)
+{
+	return efx_event_present(efx_event(channel, channel->eventq_read_ptr));
+}
 
 /* Allocate buffer table entries for event queue */
 int efx_nic_probe_eventq(struct efx_channel *channel)
@@ -1165,7 +1171,7 @@ static void efx_poll_flush_events(struct efx_nic *efx)
 	struct efx_tx_queue *tx_queue;
 	struct efx_rx_queue *rx_queue;
 	unsigned int read_ptr = channel->eventq_read_ptr;
-	unsigned int end_ptr = (read_ptr - 1) & channel->eventq_mask;
+	unsigned int end_ptr = read_ptr + channel->eventq_mask - 1;
 
 	do {
 		efx_qword_t *event = efx_event(channel, read_ptr);
@@ -1205,7 +1211,7 @@ static void efx_poll_flush_events(struct efx_nic *efx)
 		 * it's ok to throw away every non-flush event */
 		EFX_SET_QWORD(*event);
 
-		read_ptr = (read_ptr + 1) & channel->eventq_mask;
+		++read_ptr;
 	} while (read_ptr != end_ptr);
 
 	channel->eventq_read_ptr = read_ptr;
@@ -1929,6 +1935,13 @@ void efx_nic_get_regs(struct efx_nic *efx, void *buf)
 
 		size = min_t(size_t, table->step, 16);
 
+		if (table->offset >= efx->type->mem_map_size) {
+			/* No longer mapped; return dummy data */
+			memcpy(buf, "\xde\xc0\xad\xde", 4);
+			buf += table->rows * size;
+			continue;
+		}
+
 		for (i = 0; i < table->rows; i++) {
 			switch (table->step) {
 			case 4: /* 32-bit register or SRAM */
diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h
index d9de1b647d4..4bd1f2839df 100644
--- a/drivers/net/sfc/nic.h
+++ b/drivers/net/sfc/nic.h
@@ -143,16 +143,18 @@ static inline struct falcon_board *falcon_board(struct efx_nic *efx)
 /**
  * struct siena_nic_data - Siena NIC state
  * @mcdi: Management-Controller-to-Driver Interface
+ * @mcdi_smem: MCDI shared memory mapping. The mapping is always uncacheable.
  * @wol_filter_id: Wake-on-LAN packet filter id
  */
 struct siena_nic_data {
 	struct efx_mcdi_iface mcdi;
+	void __iomem *mcdi_smem;
 	int wol_filter_id;
 };
 
-extern struct efx_nic_type falcon_a1_nic_type;
-extern struct efx_nic_type falcon_b0_nic_type;
-extern struct efx_nic_type siena_a0_nic_type;
+extern const struct efx_nic_type falcon_a1_nic_type;
+extern const struct efx_nic_type falcon_b0_nic_type;
+extern const struct efx_nic_type siena_a0_nic_type;
 
 /**************************************************************************
  *
@@ -184,6 +186,7 @@ extern void efx_nic_fini_eventq(struct efx_channel *channel);
 extern void efx_nic_remove_eventq(struct efx_channel *channel);
 extern int efx_nic_process_eventq(struct efx_channel *channel, int rx_quota);
 extern void efx_nic_eventq_read_ack(struct efx_channel *channel);
+extern bool efx_nic_event_present(struct efx_channel *channel);
 
 /* MAC/PHY */
 extern void falcon_drain_tx_fifo(struct efx_nic *efx);
diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h
index b3b79472421..11d148cd844 100644
--- a/drivers/net/sfc/phy.h
+++ b/drivers/net/sfc/phy.h
@@ -13,14 +13,14 @@
 /****************************************************************************
  * 10Xpress (SFX7101) PHY
  */
-extern struct efx_phy_operations falcon_sfx7101_phy_ops;
+extern const struct efx_phy_operations falcon_sfx7101_phy_ops;
 
 extern void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode);
 
 /****************************************************************************
  * AMCC/Quake QT202x PHYs
  */
-extern struct efx_phy_operations falcon_qt202x_phy_ops;
+extern const struct efx_phy_operations falcon_qt202x_phy_ops;
 
 /* These PHYs provide various H/W control states for LEDs */
 #define QUAKE_LED_LINK_INVAL	(0)
@@ -39,7 +39,7 @@ extern void falcon_qt202x_set_led(struct efx_nic *p, int led, int state);
 /****************************************************************************
 * Transwitch CX4 retimer
 */
-extern struct efx_phy_operations falcon_txc_phy_ops;
+extern const struct efx_phy_operations falcon_txc_phy_ops;
 
 #define TXC_GPIO_DIR_INPUT	0
 #define TXC_GPIO_DIR_OUTPUT	1
@@ -50,7 +50,7 @@ extern void falcon_txc_set_gpio_val(struct efx_nic *efx, int pin, int val);
 /****************************************************************************
  * Siena managed PHYs
  */
-extern struct efx_phy_operations efx_mcdi_phy_ops;
+extern const struct efx_phy_operations efx_mcdi_phy_ops;
 
 extern int efx_mcdi_mdio_read(struct efx_nic *efx, unsigned int bus,
 			      unsigned int prtad, unsigned int devad,
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index 55f90924247..7ad97e39740 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -449,7 +449,7 @@ static void qt202x_phy_remove(struct efx_nic *efx)
 	efx->phy_data = NULL;
 }
 
-struct efx_phy_operations falcon_qt202x_phy_ops = {
+const struct efx_phy_operations falcon_qt202x_phy_ops = {
 	.probe		 = qt202x_phy_probe,
 	.init		 = qt202x_phy_init,
 	.reconfigure	 = qt202x_phy_reconfigure,
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index c0fdb59030f..b7dc891b446 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -605,6 +605,9 @@ void __efx_rx_packet(struct efx_channel *channel,
 		skb_record_rx_queue(skb, channel->channel);
 	}
 
+	if (unlikely(!(efx->net_dev->features & NETIF_F_RXCSUM)))
+		checksummed = false;
+
 	if (likely(checksummed || rx_buf->is_page)) {
 		efx_rx_packet_gro(channel, rx_buf, eh, checksummed);
 		return;
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index a0f49b348d6..822f6c2a6a7 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -131,8 +131,6 @@ static int efx_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
 static int efx_test_interrupts(struct efx_nic *efx,
 			       struct efx_self_tests *tests)
 {
-	struct efx_channel *channel;
-
 	netif_dbg(efx, drv, efx->net_dev, "testing interrupts\n");
 	tests->interrupt = -1;
 
@@ -140,15 +138,6 @@ static int efx_test_interrupts(struct efx_nic *efx,
 	efx->last_irq_cpu = -1;
 	smp_wmb();
 
-	/* ACK each interrupting event queue. Receiving an interrupt due to
-	 * traffic before a test event is raised is considered a pass */
-	efx_for_each_channel(channel, efx) {
-		if (channel->work_pending)
-			efx_process_channel_now(channel);
-		if (efx->last_irq_cpu >= 0)
-			goto success;
-	}
-
 	efx_nic_generate_interrupt(efx);
 
 	/* Wait for arrival of test interrupt. */
@@ -173,13 +162,13 @@ static int efx_test_eventq_irq(struct efx_channel *channel,
 			       struct efx_self_tests *tests)
 {
 	struct efx_nic *efx = channel->efx;
-	unsigned int magic_count, count;
+	unsigned int read_ptr, count;
 
 	tests->eventq_dma[channel->channel] = -1;
 	tests->eventq_int[channel->channel] = -1;
 	tests->eventq_poll[channel->channel] = -1;
 
-	magic_count = channel->magic_count;
+	read_ptr = channel->eventq_read_ptr;
 	channel->efx->last_irq_cpu = -1;
 	smp_wmb();
 
@@ -190,10 +179,7 @@ static int efx_test_eventq_irq(struct efx_channel *channel,
 	do {
 		schedule_timeout_uninterruptible(HZ / 100);
 
-		if (channel->work_pending)
-			efx_process_channel_now(channel);
-
-		if (channel->magic_count != magic_count)
+		if (ACCESS_ONCE(channel->eventq_read_ptr) != read_ptr)
 			goto eventq_ok;
 	} while (++count < 2);
 
@@ -211,8 +197,7 @@ static int efx_test_eventq_irq(struct efx_channel *channel,
 	}
 
 	/* Check to see if event was received even if interrupt wasn't */
-	efx_process_channel_now(channel);
-	if (channel->magic_count != magic_count) {
+	if (efx_nic_event_present(channel)) {
 		netif_err(efx, drv, efx->net_dev,
 			  "channel %d event was generated, but "
 			  "failed to trigger an interrupt\n", channel->channel);
@@ -710,12 +695,12 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 	/* Offline (i.e. disruptive) testing
 	 * This checks MAC and PHY loopback on the specified port. */
 
-	/* force the carrier state off so the kernel doesn't transmit during
-	 * the loopback test, and the watchdog timeout doesn't fire. Also put
-	 * falcon into loopback for the register test.
+	/* Detach the device so the kernel doesn't transmit during the
+	 * loopback test and the watchdog timeout doesn't fire.
 	 */
+	netif_device_detach(efx->net_dev);
+
 	mutex_lock(&efx->mac_lock);
-	efx->port_inhibited = true;
 	if (efx->loopback_modes) {
 		/* We need the 312 clock from the PHY to test the XMAC
 		 * registers, so move into XGMII loopback if available */
@@ -765,11 +750,12 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 	/* restore the PHY to the previous state */
 	mutex_lock(&efx->mac_lock);
 	efx->phy_mode = phy_mode;
-	efx->port_inhibited = false;
 	efx->loopback_mode = loopback_mode;
 	__efx_reconfigure_port(efx);
 	mutex_unlock(&efx->mac_lock);
 
+	netif_device_attach(efx->net_dev);
+
 	return rc_test;
 }
 
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index e4dd8986b1f..fb4721f780f 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -220,12 +220,26 @@ static int siena_probe_nic(struct efx_nic *efx)
 	efx_reado(efx, &reg, FR_AZ_CS_DEBUG);
 	efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1;
 
+	/* Initialise MCDI */
+	nic_data->mcdi_smem = ioremap_nocache(efx->membase_phys +
+					      FR_CZ_MC_TREG_SMEM,
+					      FR_CZ_MC_TREG_SMEM_STEP *
+					      FR_CZ_MC_TREG_SMEM_ROWS);
+	if (!nic_data->mcdi_smem) {
+		netif_err(efx, probe, efx->net_dev,
+			  "could not map MCDI at %llx+%x\n",
+			  (unsigned long long)efx->membase_phys +
+			  FR_CZ_MC_TREG_SMEM,
+			  FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS);
+		rc = -ENOMEM;
+		goto fail1;
+	}
 	efx_mcdi_init(efx);
 
 	/* Recover from a failed assertion before probing */
 	rc = efx_mcdi_handle_assertion(efx);
 	if (rc)
-		goto fail1;
+		goto fail2;
 
 	/* Let the BMC know that the driver is now in charge of link and
 	 * filter settings. We must do this before we reset the NIC */
@@ -280,6 +294,7 @@ fail4:
 fail3:
 	efx_mcdi_drv_attach(efx, false, NULL);
 fail2:
+	iounmap(nic_data->mcdi_smem);
 fail1:
 	kfree(efx->nic_data);
 	return rc;
@@ -359,6 +374,8 @@ static int siena_init_nic(struct efx_nic *efx)
 
 static void siena_remove_nic(struct efx_nic *efx)
 {
+	struct siena_nic_data *nic_data = efx->nic_data;
+
 	efx_nic_free_buffer(efx, &efx->irq_status);
 
 	siena_reset_hw(efx, RESET_TYPE_ALL);
@@ -368,7 +385,8 @@ static void siena_remove_nic(struct efx_nic *efx)
 		efx_mcdi_drv_attach(efx, false, NULL);
 
 	/* Tear down the private nic state */
-	kfree(efx->nic_data);
+	iounmap(nic_data->mcdi_smem);
+	kfree(nic_data);
 	efx->nic_data = NULL;
 }
 
@@ -581,7 +599,7 @@ static void siena_init_wol(struct efx_nic *efx)
  **************************************************************************
  */
 
-struct efx_nic_type siena_a0_nic_type = {
+const struct efx_nic_type siena_a0_nic_type = {
 	.probe = siena_probe_nic,
 	.remove = siena_remove_nic,
 	.init = siena_init_nic,
@@ -606,8 +624,7 @@ struct efx_nic_type siena_a0_nic_type = {
 	.default_mac_ops = &efx_mcdi_mac_operations,
 
 	.revision = EFX_REV_SIENA_A0,
-	.mem_map_size = (FR_CZ_MC_TREG_SMEM +
-			 FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS),
+	.mem_map_size = FR_CZ_MC_TREG_SMEM, /* MC_TREG_SMEM mapped separately */
 	.txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL,
 	.rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL,
 	.buf_tbl_base = FR_BZ_BUF_FULL_TBL,
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index efdceb35aaa..7b0fd89e7b8 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -460,7 +460,7 @@ tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	/* In loopback, the PHY automatically brings up the correct interface,
 	 * but doesn't advertise the correct speed. So override it */
 	if (LOOPBACK_EXTERNAL(efx))
-		ecmd->speed = SPEED_10000;
+		ethtool_cmd_speed_set(ecmd, SPEED_10000);
 }
 
 static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
@@ -478,7 +478,7 @@ static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
 			  advertising & ADVERTISED_10000baseT_Full);
 }
 
-struct efx_phy_operations falcon_sfx7101_phy_ops = {
+const struct efx_phy_operations falcon_sfx7101_phy_ops = {
 	.probe		  = tenxpress_phy_probe,
 	.init             = tenxpress_phy_init,
 	.reconfigure      = tenxpress_phy_reconfigure,
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 13980190821..84eb99e0f8d 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -205,7 +205,9 @@ netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 					goto unwind;
 				}
 				smp_mb();
-				netif_tx_start_queue(tx_queue->core_txq);
+				if (likely(!efx->loopback_selftest))
+					netif_tx_start_queue(
+						tx_queue->core_txq);
 			}
 
 			insert_ptr = tx_queue->insert_count & tx_queue->ptr_mask;
@@ -338,8 +340,7 @@ netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb,
 	struct efx_tx_queue *tx_queue;
 	unsigned index, type;
 
-	if (unlikely(efx->port_inhibited))
-		return NETDEV_TX_BUSY;
+	EFX_WARN_ON_PARANOID(!netif_device_present(net_dev));
 
 	index = skb_get_queue_mapping(skb);
 	type = skb->ip_summed == CHECKSUM_PARTIAL ? EFX_TXQ_TYPE_OFFLOAD : 0;
@@ -435,7 +436,8 @@ void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index)
 	 * queue state. */
 	smp_mb();
 	if (unlikely(netif_tx_queue_stopped(tx_queue->core_txq)) &&
-	    likely(efx->port_enabled)) {
+	    likely(efx->port_enabled) &&
+	    likely(netif_device_present(efx->net_dev))) {
 		fill_level = tx_queue->insert_count - tx_queue->read_count;
 		if (fill_level < EFX_TXQ_THRESHOLD(efx)) {
 			EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
diff --git a/drivers/net/sfc/txc43128_phy.c b/drivers/net/sfc/txc43128_phy.c
index d9886addcc9..7c21b334a75 100644
--- a/drivers/net/sfc/txc43128_phy.c
+++ b/drivers/net/sfc/txc43128_phy.c
@@ -545,7 +545,7 @@ static void txc43128_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	mdio45_ethtool_gset(&efx->mdio, ecmd);
 }
 
-struct efx_phy_operations falcon_txc_phy_ops = {
+const struct efx_phy_operations falcon_txc_phy_ops = {
 	.probe		= txc43128_phy_probe,
 	.init		= txc43128_phy_init,
 	.reconfigure	= txc43128_phy_reconfigure,
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 3a0cc63428e..dd03bf61998 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -33,7 +33,7 @@ static char *sgiseeqstr = "SGI Seeq8003";
  * with that in mind, I've decided to make this driver look completely like a
  * stupid Lance from a driver architecture perspective.  Only difference is that
  * here our "ring buffer" looks and acts like a real Lance one does but is
- * layed out like how the HPC DMA and the Seeq want it to.  You'd be surprised
+ * laid out like how the HPC DMA and the Seeq want it to.  You'd be surprised
  * how a stupid idea like this can pay off in performance, not to mention
  * making this driver 2,000 times easier to write. ;-)
  */
@@ -77,7 +77,7 @@ struct sgiseeq_tx_desc {
 };
 
 /*
- * Warning: This structure is layed out in a certain way because HPC dma
+ * Warning: This structure is laid out in a certain way because HPC dma
  *          descriptors must be 8-byte aligned.  So don't touch this without
  *          some care.
  */
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index e9e7a530552..8a72a979ee7 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1875,7 +1875,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_unregister;
 
-	/* print device infomation */
+	/* print device information */
 	pr_info("Base address at 0x%x, %pM, IRQ %d.\n",
 	       (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
 
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 3406ed87091..b436e007eea 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -93,7 +93,7 @@ enum sis190_registers {
 	IntrStatus		= 0x20,
 	IntrMask		= 0x24,
 	IntrControl		= 0x28,
-	IntrTimer		= 0x2c,	// unused (Interupt Timer)
+	IntrTimer		= 0x2c,	// unused (Interrupt Timer)
 	PMControl		= 0x30,	// unused (Power Mgmt Control/Status)
 	rsv2			= 0x34,	// reserved
 	ROMControl		= 0x38,
@@ -234,7 +234,7 @@ enum _DescStatusBit {
 	RxSizeMask	= 0x0000ffff
 	/*
 	 * The asic could apparently do vlan, TSO, jumbo (sis191 only) and
-	 * provide two (unused with Linux) Tx queues. No publically
+	 * provide two (unused with Linux) Tx queues. No publicly
 	 * available documentation alas.
 	 */
 };
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 84d4167eee9..484f795a779 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -240,7 +240,8 @@ static const struct ethtool_ops sis900_ethtool_ops;
  *	@net_dev: the net device to get address for
  *
  *	Older SiS900 and friends, use EEPROM to store MAC address.
- *	MAC address is read from read_eeprom() into @net_dev->dev_addr.
+ *	MAC address is read from read_eeprom() into @net_dev->dev_addr and
+ *	@net_dev->perm_addr.
  */
 
 static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
@@ -261,6 +262,9 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
 	for (i = 0; i < 3; i++)
 	        ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
 
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
 	return 1;
 }
 
@@ -271,7 +275,8 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de
  *
  *	SiS630E model, use APC CMOS RAM to store MAC address.
  *	APC CMOS RAM is accessed through ISA bridge.
- *	MAC address is read into @net_dev->dev_addr.
+ *	MAC address is read into @net_dev->dev_addr and
+ *	@net_dev->perm_addr.
  */
 
 static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
@@ -296,6 +301,10 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
 		outb(0x09 + i, 0x70);
 		((u8 *)(net_dev->dev_addr))[i] = inb(0x71);
 	}
+
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
 	pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40);
 	pci_dev_put(isa_bridge);
 
@@ -310,7 +319,7 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
  *
  *	SiS635 model, set MAC Reload Bit to load Mac address from APC
  *	to rfdr. rfdr is accessed through rfcr. MAC address is read into
- *	@net_dev->dev_addr.
+ *	@net_dev->dev_addr and @net_dev->perm_addr.
  */
 
 static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
@@ -334,6 +343,9 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
 		*( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr);
 	}
 
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
 	/* enable packet filtering */
 	outl(rfcrSave | RFEN, rfcr + ioaddr);
 
@@ -353,7 +365,7 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
  *	EEDONE signal to refuse EEPROM access by LAN.
  *	The EEPROM map of SiS962 or SiS963 is different to SiS900.
  *	The signature field in SiS962 or SiS963 spec is meaningless.
- *	MAC address is read into @net_dev->dev_addr.
+ *	MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr.
  */
 
 static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
@@ -372,6 +384,9 @@ static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
 			for (i = 0; i < 3; i++)
 			        ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
 
+			/* Store MAC Address in perm_addr */
+			memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
 			outl(EEDONE, ee_addr);
 			return 1;
 		} else {
@@ -1180,7 +1195,7 @@ sis900_init_rx_ring(struct net_device *net_dev)
  *
  *	630E equalizer workaround rule(Cyrus Huang 08/15)
  *	PHY register 14h(Test)
- *	Bit 14: 0 -- Automatically dectect (default)
+ *	Bit 14: 0 -- Automatically detect (default)
  *		1 -- Manually set Equalizer filter
  *	Bit 13: 0 -- (Default)
  *		1 -- Speed up convergence of equalizer setting
@@ -1192,7 +1207,7 @@ sis900_init_rx_ring(struct net_device *net_dev)
  *	Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0
  *	Link Off:Set Bit 13 to 1, Bit 14 to 0
  *	Calculate Equalizer value:
- *	When Link is ON and Bit 14 is 0, SIS900PHY will auto-dectect proper equalizer value.
+ *	When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value.
  *	When the equalizer is stable, this value is not a fixed value. It will be within
  *	a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9)
  *	0 <= max <= 4  --> set equalizer to max
@@ -1723,7 +1738,7 @@ static int sis900_rx(struct net_device *net_dev)
 		rx_size = data_size - CRC_SIZE;
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-		/* ``TOOLONG'' flag means jumbo packet recived. */
+		/* ``TOOLONG'' flag means jumbo packet received. */
 		if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE)
 			rx_status &= (~ ((unsigned int)TOOLONG));
 #endif
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 8639a0884f5..2fc5987b41d 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -241,7 +241,7 @@ int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,
 			!= SMT_RDF_SUCCESS) ||
 			(sm->smt_tid != smc->ess.alloc_trans_id)) {
 
-			DB_ESS("ESS: Allocation Responce not accepted\n",0,0) ;
+			DB_ESS("ESS: Allocation Response not accepted\n",0,0) ;
 			return fs;
 		}
 
@@ -393,7 +393,7 @@ static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhe
 	 *		      |	 T-NEG	|
 	 *		       -       -
  	 *
-	 * T-NEG is discribed by the equation:
+	 * T-NEG is described by the equation:
 	 *
 	 *		     (-) fddiMACT-NEG
 	 *	T-NEG =	    -------------------
@@ -479,7 +479,7 @@ static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
 	void			*p ;
 
 	/*
-	 * get and initialize the responce frame
+	 * get and initialize the response frame
 	 */
 	if (sba_cmd == CHANGE_ALLOCATION) {
 		if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY,
@@ -578,7 +578,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 	}
 	
 	/*
-	 * get and initialize the responce frame
+	 * get and initialize the response frame
 	 */
 	if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REQUEST,
 			sizeof(struct smt_sba_alc_req))))
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c
index ca4e7bb6a5a..a20ed1a9809 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/skfp/fplustm.c
@@ -340,7 +340,7 @@ static void mac_counter_init(struct s_smc *smc)
 	outpw(FM_A(FM_LCNTR),0) ;
 	outpw(FM_A(FM_ECNTR),0) ;
 	/*
-	 * clear internal error counter stucture
+	 * clear internal error counter structure
 	 */
 	ec = (u_long *)&smc->hw.fp.err_stats ;
 	for (i = (sizeof(struct err_st)/sizeof(long)) ; i ; i--)
@@ -1262,8 +1262,8 @@ Function	DOWNCALL/INTERN	(SMT, fplustm.c)
 
 Para	mode =	1	RX_ENABLE_ALLMULTI	enable all multicasts
 		2	RX_DISABLE_ALLMULTI	disable "enable all multicasts"
-		3	RX_ENABLE_PROMISC	enable promiscous
-		4	RX_DISABLE_PROMISC	disable promiscous
+		3	RX_ENABLE_PROMISC	enable promiscuous
+		4	RX_DISABLE_PROMISC	disable promiscuous
 		5	RX_ENABLE_NSA		enable reception of NSA frames
 		6	RX_DISABLE_NSA		disable reception of NSA frames
 
diff --git a/drivers/net/skfp/h/cmtdef.h b/drivers/net/skfp/h/cmtdef.h
index f2f771d8be7..5a6c6122ccb 100644
--- a/drivers/net/skfp/h/cmtdef.h
+++ b/drivers/net/skfp/h/cmtdef.h
@@ -19,7 +19,7 @@
 
 /*
  * implementation specific constants
- * MODIIFY THE FOLLWOING THREE DEFINES
+ * MODIIFY THE FOLLOWING THREE DEFINES
  */
 #define AMDPLC			/* if Amd PLC chip used */
 #ifdef	CONC
@@ -456,7 +456,7 @@ struct s_plc {
 	u_long soft_err ;		/* error counter */
 	u_long parity_err ;		/* error counter */
 	u_long ebuf_err ;		/* error counter */
-	u_long ebuf_cont ;		/* continous error counter */
+	u_long ebuf_cont ;		/* continuous error counter */
 	u_long phyinv ;			/* error counter */
 	u_long vsym_ctr ;		/* error counter */
 	u_long mini_ctr ;		/* error counter */
diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/skfp/h/fplustm.h
index 6d738e1e239..d43191ed938 100644
--- a/drivers/net/skfp/h/fplustm.h
+++ b/drivers/net/skfp/h/fplustm.h
@@ -237,8 +237,8 @@ struct s_smt_fp {
  */
 #define RX_ENABLE_ALLMULTI	1	/* enable all multicasts */
 #define RX_DISABLE_ALLMULTI	2	/* disable "enable all multicasts" */
-#define RX_ENABLE_PROMISC	3	/* enable promiscous */
-#define RX_DISABLE_PROMISC	4	/* disable promiscous */
+#define RX_ENABLE_PROMISC	3	/* enable promiscuous */
+#define RX_DISABLE_PROMISC	4	/* disable promiscuous */
 #define RX_ENABLE_NSA		5	/* enable reception of NSA frames */
 #define RX_DISABLE_NSA		6	/* disable reception of NSA frames */
 
diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h
index 026a83b9f74..c774a95902f 100644
--- a/drivers/net/skfp/h/smc.h
+++ b/drivers/net/skfp/h/smc.h
@@ -388,7 +388,7 @@ struct smt_config {
 	u_long	rmt_t_poll ;		/* RMT : claim/beacon poller */
 	u_long  rmt_dup_mac_behavior ;  /* Flag for the beavior of SMT if
 					 * a Duplicate MAC Address was detected.
-					 * FALSE: SMT will leave finaly the ring
+					 * FALSE: SMT will leave finally the ring
 					 * TRUE:  SMT will reinstert into the ring
 					 */
 	u_long	mac_d_max ;		/* MAC : D_Max timer value */
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 2976757a36f..2030f9cbb24 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -793,7 +793,7 @@ struct smt_rdf {
 } ;
 
 /*
- * SBA Request Allocation Responce Frame
+ * SBA Request Allocation Response Frame
  */
 struct smt_sba_alc_res {
 	struct smt_header	smt ;		/* generic header */
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h
index 5ba0b830675..0b73690280f 100644
--- a/drivers/net/skfp/h/supern_2.h
+++ b/drivers/net/skfp/h/supern_2.h
@@ -14,7 +14,7 @@
 
 /*
 	defines for AMD Supernet II chip set
-	the chips are refered to as
+	the chips are referred to as
 		FPLUS	Formac Plus
 		PLC	Physical Layer
 
@@ -386,7 +386,7 @@ struct tx_queue {
 #define	FM_MDISRCV	(4<<8)		/* disable receive function */
 #define	FM_MRES0	(5<<8)		/* reserve */
 #define	FM_MLIMPROM	(6<<8)		/* limited-promiscuous mode */
-#define FM_MPROMISCOUS	(7<<8)		/* address detection : promiscous */
+#define FM_MPROMISCOUS	(7<<8)		/* address detection : promiscuous */
 
 #define FM_SELSA	0x0800		/* select-short-address bit */
 
diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/skfp/hwmtm.c
index af5a755e269..e26398b5a7d 100644
--- a/drivers/net/skfp/hwmtm.c
+++ b/drivers/net/skfp/hwmtm.c
@@ -691,7 +691,7 @@ static u_long repair_rxd_ring(struct s_smc *smc, struct s_smt_rx_queue *queue)
  *		interrupt service routine, handles the interrupt requests
  *		generated by the FDDI adapter.
  *
- * NOTE:	The operating system dependent module must garantee that the
+ * NOTE:	The operating system dependent module must guarantee that the
  *		interrupts of the adapter are disabled when it calls fddi_isr.
  *
  *	About the USE_BREAK_ISR mechanismn:
diff --git a/drivers/net/skfp/pcmplc.c b/drivers/net/skfp/pcmplc.c
index 112d35b1bf0..88d02d0a42c 100644
--- a/drivers/net/skfp/pcmplc.c
+++ b/drivers/net/skfp/pcmplc.c
@@ -1680,7 +1680,7 @@ void plc_irq(struct s_smc *smc, int np, unsigned int cmd)
 			 * Prevent counter from being wrapped after
 			 * hanging years in that interrupt.
 			 */
-			plc->ebuf_cont++ ;	/* Ebuf continous error */
+			plc->ebuf_cont++ ;	/* Ebuf continuous error */
 		}
 
 #ifdef	SUPERNET_3
@@ -1717,8 +1717,8 @@ void plc_irq(struct s_smc *smc, int np, unsigned int cmd)
 		}
 #endif	/* SUPERNET_3 */
 	} else {
-		/* Reset the continous error variable */
-		plc->ebuf_cont = 0 ;	/* reset Ebuf continous error */
+		/* Reset the continuous error variable */
+		plc->ebuf_cont = 0 ;	/* reset Ebuf continuous error */
 	}
 	if (cmd & PL_PHYINV) {		/* physical layer invalid signal */
 		plc->phyinv++ ;
diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c
index 1e1bd0c201c..08d94329c12 100644
--- a/drivers/net/skfp/smt.c
+++ b/drivers/net/skfp/smt.c
@@ -219,7 +219,7 @@ void smt_emulate_token_ct(struct s_smc *smc, int mac_index)
 
 	/*
 	 * Only when ring is up we will have a token count. The
-	 * flag is unfortunatly a single instance value. This
+	 * flag is unfortunately a single instance value. This
 	 * doesn't matter now, because we currently have only
 	 * one MAC instance.
 	 */
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 35b28f42d20..52a48cb7544 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -303,7 +303,7 @@ static int skge_get_settings(struct net_device *dev,
 
 	ecmd->advertising = skge->advertising;
 	ecmd->autoneg = skge->autoneg;
-	ecmd->speed = skge->speed;
+	ethtool_cmd_speed_set(ecmd, skge->speed);
 	ecmd->duplex = skge->duplex;
 	return 0;
 }
@@ -321,8 +321,9 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		skge->speed = -1;
 	} else {
 		u32 setting;
+		u32 speed = ethtool_cmd_speed(ecmd);
 
-		switch (ecmd->speed) {
+		switch (speed) {
 		case SPEED_1000:
 			if (ecmd->duplex == DUPLEX_FULL)
 				setting = SUPPORTED_1000baseT_Full;
@@ -355,7 +356,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		if ((setting & supported) == 0)
 			return -EINVAL;
 
-		skge->speed = ecmd->speed;
+		skge->speed = speed;
 		skge->duplex = ecmd->duplex;
 	}
 
@@ -537,46 +538,6 @@ static int skge_nway_reset(struct net_device *dev)
 	return 0;
 }
 
-static int skge_set_sg(struct net_device *dev, u32 data)
-{
-	struct skge_port *skge = netdev_priv(dev);
-	struct skge_hw *hw = skge->hw;
-
-	if (hw->chip_id == CHIP_ID_GENESIS && data)
-		return -EOPNOTSUPP;
-	return ethtool_op_set_sg(dev, data);
-}
-
-static int skge_set_tx_csum(struct net_device *dev, u32 data)
-{
-	struct skge_port *skge = netdev_priv(dev);
-	struct skge_hw *hw = skge->hw;
-
-	if (hw->chip_id == CHIP_ID_GENESIS && data)
-		return -EOPNOTSUPP;
-
-	return ethtool_op_set_tx_csum(dev, data);
-}
-
-static u32 skge_get_rx_csum(struct net_device *dev)
-{
-	struct skge_port *skge = netdev_priv(dev);
-
-	return skge->rx_csum;
-}
-
-/* Only Yukon supports checksum offload. */
-static int skge_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct skge_port *skge = netdev_priv(dev);
-
-	if (skge->hw->chip_id == CHIP_ID_GENESIS && data)
-		return -EOPNOTSUPP;
-
-	skge->rx_csum = data;
-	return 0;
-}
-
 static void skge_get_pauseparam(struct net_device *dev,
 				struct ethtool_pauseparam *ecmd)
 {
@@ -786,28 +747,27 @@ static void skge_led(struct skge_port *skge, enum led_mode mode)
 }
 
 /* blink LED's for finding board */
-static int skge_phys_id(struct net_device *dev, u32 data)
+static int skge_set_phys_id(struct net_device *dev,
+			    enum ethtool_phys_id_state state)
 {
 	struct skge_port *skge = netdev_priv(dev);
-	unsigned long ms;
-	enum led_mode mode = LED_MODE_TST;
 
-	if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-		ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT / HZ) * 1000;
-	else
-		ms = data * 1000;
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 2;	/* cycle on/off twice per second */
 
-	while (ms > 0) {
-		skge_led(skge, mode);
-		mode ^= LED_MODE_TST;
+	case ETHTOOL_ID_ON:
+		skge_led(skge, LED_MODE_TST);
+		break;
 
-		if (msleep_interruptible(BLINK_MS))
-			break;
-		ms -= BLINK_MS;
-	}
+	case ETHTOOL_ID_OFF:
+		skge_led(skge, LED_MODE_OFF);
+		break;
 
-	/* back to regular LED state */
-	skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
+	case ETHTOOL_ID_INACTIVE:
+		/* back to regular LED state */
+		skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
+	}
 
 	return 0;
 }
@@ -925,12 +885,8 @@ static const struct ethtool_ops skge_ethtool_ops = {
 	.set_pauseparam = skge_set_pauseparam,
 	.get_coalesce	= skge_get_coalesce,
 	.set_coalesce	= skge_set_coalesce,
-	.set_sg		= skge_set_sg,
-	.set_tx_csum	= skge_set_tx_csum,
-	.get_rx_csum	= skge_get_rx_csum,
-	.set_rx_csum	= skge_set_rx_csum,
 	.get_strings	= skge_get_strings,
-	.phys_id	= skge_phys_id,
+	.set_phys_id	= skge_set_phys_id,
 	.get_sset_count = skge_get_sset_count,
 	.get_ethtool_stats = skge_get_ethtool_stats,
 };
@@ -3085,7 +3041,8 @@ static struct sk_buff *skge_rx_get(struct net_device *dev,
 	}
 
 	skb_put(skb, len);
-	if (skge->rx_csum) {
+
+	if (dev->features & NETIF_F_RXCSUM) {
 		skb->csum = csum;
 		skb->ip_summed = CHECKSUM_COMPLETE;
 	}
@@ -3847,10 +3804,10 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 	setup_timer(&skge->link_timer, xm_link_timer, (unsigned long) skge);
 
 	if (hw->chip_id != CHIP_ID_GENESIS) {
-		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
-		skge->rx_csum = 1;
+		dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+		                   NETIF_F_RXCSUM;
+		dev->features |= dev->hw_features;
 	}
-	dev->features |= NETIF_F_GRO;
 
 	/* read the mac address */
 	memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN);
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 507addcaffa..598bf7a1a55 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1038,7 +1038,7 @@ enum {
 
 	PHY_ST_PRE_SUP	= 1<<6, /* Bit  6:	Preamble Suppression */
 	PHY_ST_AN_OVER	= 1<<5, /* Bit  5:	Auto-Negotiation Over */
-	PHY_ST_REM_FLT	= 1<<4, /* Bit  4:	Remote Fault Condition Occured */
+	PHY_ST_REM_FLT	= 1<<4, /* Bit  4:	Remote Fault Condition Occurred */
 	PHY_ST_AN_CAP	= 1<<3, /* Bit  3:	Auto-Negotiation Capability */
 	PHY_ST_LSYNC	= 1<<2, /* Bit  2:	Link Synchronized */
 	PHY_ST_JAB_DET	= 1<<1, /* Bit  1:	Jabber Detected */
@@ -1721,8 +1721,8 @@ enum {
 	GM_GPSR_LINK_UP		= 1<<12, /* Bit 12:	Link Up Status */
 	GM_GPSR_PAUSE		= 1<<11, /* Bit 11:	Pause State */
 	GM_GPSR_TX_ACTIVE	= 1<<10, /* Bit 10:	Tx in Progress */
-	GM_GPSR_EXC_COL		= 1<<9,	/* Bit  9:	Excessive Collisions Occured */
-	GM_GPSR_LAT_COL		= 1<<8,	/* Bit  8:	Late Collisions Occured */
+	GM_GPSR_EXC_COL		= 1<<9,	/* Bit  9:	Excessive Collisions Occurred */
+	GM_GPSR_LAT_COL		= 1<<8,	/* Bit  8:	Late Collisions Occurred */
 
 	GM_GPSR_PHY_ST_CH	= 1<<5,	/* Bit  5:	PHY Status Change */
 	GM_GPSR_GIG_SPEED	= 1<<4,	/* Bit  4:	Gigabit Speed (1 = 1000 Mbps) */
@@ -2227,7 +2227,7 @@ enum {
 	XM_ST_BC	= 1<<7,		/* Bit  7:	Broadcast packet */
 	XM_ST_MC	= 1<<6,		/* Bit  6:	Multicast packet */
 	XM_ST_UC	= 1<<5,		/* Bit  5:	Unicast packet */
-	XM_ST_TX_UR	= 1<<4,		/* Bit  4:	FIFO Underrun occured */
+	XM_ST_TX_UR	= 1<<4,		/* Bit  4:	FIFO Underrun occurred */
 	XM_ST_CS_ERR	= 1<<3,		/* Bit  3:	Carrier Sense Error */
 	XM_ST_LAT_COL	= 1<<2,		/* Bit  2:	Late Collision Error */
 	XM_ST_MUL_COL	= 1<<1,		/* Bit  1:	Multiple Collisions */
@@ -2460,7 +2460,6 @@ struct skge_port {
 	struct timer_list    link_timer;
 	enum pause_control   flow_control;
 	enum pause_status    flow_status;
-	u8		     rx_csum;
 	u8		     blink_on;
 	u8		     wol;
 	u8		     autoneg;	/* AUTONEG_ENABLE, AUTONEG_DISABLE */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2a91868788f..3ee41da130c 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -932,7 +932,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 	sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
 	sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
 
-	/* On chips without ram buffer, pause is controled by MAC level */
+	/* On chips without ram buffer, pause is controlled by MAC level */
 	if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
 		/* Pause threshold is scaled by 8 in bytes */
 		if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
@@ -1198,12 +1198,12 @@ static void rx_set_checksum(struct sky2_port *sky2)
 
 	sky2_write32(sky2->hw,
 		     Q_ADDR(rxqaddr[sky2->port], Q_CSR),
-		     (sky2->flags & SKY2_FLAG_RX_CHECKSUM)
+		     (sky2->netdev->features & NETIF_F_RXCSUM)
 		     ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
 }
 
 /* Enable/disable receive hash calculation (RSS) */
-static void rx_set_rss(struct net_device *dev)
+static void rx_set_rss(struct net_device *dev, u32 features)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
@@ -1216,7 +1216,7 @@ static void rx_set_rss(struct net_device *dev)
 	}
 
 	/* Program RSS initial values */
-	if (dev->features & NETIF_F_RXHASH) {
+	if (features & NETIF_F_RXHASH) {
 		u32 key[nkeys];
 
 		get_random_bytes(key, nkeys * sizeof(u32));
@@ -1322,32 +1322,32 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return err;
 }
 
-#define NETIF_F_ALL_VLAN (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX)
+#define SKY2_VLAN_OFFLOADS (NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO)
 
-static void sky2_vlan_mode(struct net_device *dev)
+static void sky2_vlan_mode(struct net_device *dev, u32 features)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
 	u16 port = sky2->port;
 
-	if (dev->features & NETIF_F_HW_VLAN_RX)
+	if (features & NETIF_F_HW_VLAN_RX)
 		sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
 			     RX_VLAN_STRIP_ON);
 	else
 		sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
 			     RX_VLAN_STRIP_OFF);
 
-	dev->vlan_features = dev->features &~ NETIF_F_ALL_VLAN;
-	if (dev->features & NETIF_F_HW_VLAN_TX)
+	if (features & NETIF_F_HW_VLAN_TX) {
 		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
 			     TX_VLAN_TAG_ON);
-	else {
+
+		dev->vlan_features |= SKY2_VLAN_OFFLOADS;
+	} else {
 		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
 			     TX_VLAN_TAG_OFF);
 
 		/* Can't do transmit offload of vlan without hw vlan */
-		dev->vlan_features &= ~(NETIF_F_TSO | NETIF_F_SG
-					| NETIF_F_ALL_CSUM);
+		dev->vlan_features &= ~SKY2_VLAN_OFFLOADS;
 	}
 }
 
@@ -1463,7 +1463,7 @@ static void sky2_rx_start(struct sky2_port *sky2)
 		rx_set_checksum(sky2);
 
 	if (!(hw->flags & SKY2_HW_RSS_BROKEN))
-		rx_set_rss(sky2->netdev);
+		rx_set_rss(sky2->netdev, sky2->netdev->features);
 
 	/* submit Rx ring */
 	for (i = 0; i < sky2->rx_pending; i++) {
@@ -1626,7 +1626,8 @@ static void sky2_hw_up(struct sky2_port *sky2)
 	sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
 			   sky2->tx_ring_size - 1);
 
-	sky2_vlan_mode(sky2->netdev);
+	sky2_vlan_mode(sky2->netdev, sky2->netdev->features);
+	netdev_update_features(sky2->netdev);
 
 	sky2_rx_start(sky2);
 }
@@ -2261,12 +2262,9 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
 	     hw->chip_id == CHIP_ID_YUKON_FE_P))
 		return -EINVAL;
 
-	/* TSO, etc on Yukon Ultra and MTU > 1500 not supported */
-	if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U)
-		dev->features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
-
 	if (!netif_running(dev)) {
 		dev->mtu = new_mtu;
+		netdev_update_features(dev);
 		return 0;
 	}
 
@@ -2288,6 +2286,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
 	sky2_rx_clean(sky2);
 
 	dev->mtu = new_mtu;
+	netdev_update_features(dev);
 
 	mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
 		GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
@@ -2535,8 +2534,11 @@ static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
 			   "%s: receive checksum problem (status = %#x)\n",
 			   sky2->netdev->name, status);
 
-		/* Disable checksum offload */
-		sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
+		/* Disable checksum offload
+		 * It will be reenabled on next ndo_set_features, but if it's
+		 * really broken, will get disabled again
+		 */
+		sky2->netdev->features &= ~NETIF_F_RXCSUM;
 		sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
 			     BMU_DIS_RX_CHKSUM);
 	}
@@ -2591,7 +2593,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 
 			/* This chip reports checksum status differently */
 			if (hw->flags & SKY2_HW_NEW_LE) {
-				if ((sky2->flags & SKY2_FLAG_RX_CHECKSUM) &&
+				if ((dev->features & NETIF_F_RXCSUM) &&
 				    (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
 				    (le->css & CSS_TCPUDPCSOK))
 					skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2616,7 +2618,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 			sky2->rx_tag = length;
 			/* fall through */
 		case OP_RXCHKS:
-			if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
+			if (likely(dev->features & NETIF_F_RXCSUM))
 				sky2_rx_checksum(sky2, status);
 			break;
 
@@ -3255,7 +3257,7 @@ static void sky2_reset(struct sky2_hw *hw)
 
 /* Take device down (offline).
  * Equivalent to doing dev_stop() but this does not
- * inform upper layers of the transistion.
+ * inform upper layers of the transition.
  */
 static void sky2_detach(struct net_device *dev)
 {
@@ -3411,10 +3413,10 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	ecmd->phy_address = PHY_ADDR_MARV;
 	if (sky2_is_copper(hw)) {
 		ecmd->port = PORT_TP;
-		ecmd->speed = sky2->speed;
+		ethtool_cmd_speed_set(ecmd, sky2->speed);
 		ecmd->supported |=  SUPPORTED_Autoneg | SUPPORTED_TP;
 	} else {
-		ecmd->speed = SPEED_1000;
+		ethtool_cmd_speed_set(ecmd, SPEED_1000);
 		ecmd->port = PORT_FIBRE;
 		ecmd->supported |=  SUPPORTED_Autoneg | SUPPORTED_FIBRE;
 	}
@@ -3450,8 +3452,9 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		sky2->speed = -1;
 	} else {
 		u32 setting;
+		u32 speed = ethtool_cmd_speed(ecmd);
 
-		switch (ecmd->speed) {
+		switch (speed) {
 		case SPEED_1000:
 			if (ecmd->duplex == DUPLEX_FULL)
 				setting = SUPPORTED_1000baseT_Full;
@@ -3484,7 +3487,7 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		if ((setting & supported) == 0)
 			return -EINVAL;
 
-		sky2->speed = ecmd->speed;
+		sky2->speed = speed;
 		sky2->duplex = ecmd->duplex;
 		sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
 	}
@@ -3552,28 +3555,6 @@ static const struct sky2_stat {
 	{ "tx_fifo_underrun", GM_TXE_FIFO_UR },
 };
 
-static u32 sky2_get_rx_csum(struct net_device *dev)
-{
-	struct sky2_port *sky2 = netdev_priv(dev);
-
-	return !!(sky2->flags & SKY2_FLAG_RX_CHECKSUM);
-}
-
-static int sky2_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct sky2_port *sky2 = netdev_priv(dev);
-
-	if (data)
-		sky2->flags |= SKY2_FLAG_RX_CHECKSUM;
-	else
-		sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
-
-	sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
-		     data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
-
-	return 0;
-}
-
 static u32 sky2_get_msglevel(struct net_device *netdev)
 {
 	struct sky2_port *sky2 = netdev_priv(netdev);
@@ -3826,23 +3807,24 @@ static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
 }
 
 /* blink LED's for finding board */
-static int sky2_phys_id(struct net_device *dev, u32 data)
+static int sky2_set_phys_id(struct net_device *dev,
+			    enum ethtool_phys_id_state state)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
-	unsigned int i;
-
-	if (data == 0)
-		data = UINT_MAX;
 
-	for (i = 0; i < data; i++) {
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 1;	/* cycle on/off once per second */
+	case ETHTOOL_ID_INACTIVE:
+		sky2_led(sky2, MO_LED_NORM);
+		break;
+	case ETHTOOL_ID_ON:
 		sky2_led(sky2, MO_LED_ON);
-		if (msleep_interruptible(500))
-			break;
+		break;
+	case ETHTOOL_ID_OFF:
 		sky2_led(sky2, MO_LED_OFF);
-		if (msleep_interruptible(500))
-			break;
+		break;
 	}
-	sky2_led(sky2, MO_LED_NORM);
 
 	return 0;
 }
@@ -4083,34 +4065,6 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	}
 }
 
-/* In order to do Jumbo packets on these chips, need to turn off the
- * transmit store/forward. Therefore checksum offload won't work.
- */
-static int no_tx_offload(struct net_device *dev)
-{
-	const struct sky2_port *sky2 = netdev_priv(dev);
-	const struct sky2_hw *hw = sky2->hw;
-
-	return dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U;
-}
-
-static int sky2_set_tx_csum(struct net_device *dev, u32 data)
-{
-	if (data && no_tx_offload(dev))
-		return -EINVAL;
-
-	return ethtool_op_set_tx_csum(dev, data);
-}
-
-
-static int sky2_set_tso(struct net_device *dev, u32 data)
-{
-	if (data && no_tx_offload(dev))
-		return -EINVAL;
-
-	return ethtool_op_set_tso(dev, data);
-}
-
 static int sky2_get_eeprom_len(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
@@ -4213,31 +4167,36 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
 	return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
 }
 
-static int sky2_set_flags(struct net_device *dev, u32 data)
+static u32 sky2_fix_features(struct net_device *dev, u32 features)
 {
-	struct sky2_port *sky2 = netdev_priv(dev);
-	unsigned long old_feat = dev->features;
-	u32 supported = 0;
-	int rc;
+	const struct sky2_port *sky2 = netdev_priv(dev);
+	const struct sky2_hw *hw = sky2->hw;
 
-	if (!(sky2->hw->flags & SKY2_HW_RSS_BROKEN))
-		supported |= ETH_FLAG_RXHASH;
+	/* In order to do Jumbo packets on these chips, need to turn off the
+	 * transmit store/forward. Therefore checksum offload won't work.
+	 */
+	if (dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U)
+		features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
 
-	if (!(sky2->hw->flags & SKY2_HW_VLAN_BROKEN))
-		supported |= ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN;
+	return features;
+}
 
-	printk(KERN_DEBUG "sky2 set_flags: supported %x data %x\n",
-	       supported, data);
+static int sky2_set_features(struct net_device *dev, u32 features)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	u32 changed = dev->features ^ features;
 
-	rc = ethtool_op_set_flags(dev, data, supported);
-	if (rc)
-		return rc;
+	if (changed & NETIF_F_RXCSUM) {
+		u32 on = features & NETIF_F_RXCSUM;
+		sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+			     on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+	}
 
-	if ((old_feat ^ dev->features) & NETIF_F_RXHASH)
-		rx_set_rss(dev);
+	if (changed & NETIF_F_RXHASH)
+		rx_set_rss(dev, features);
 
-	if ((old_feat ^ dev->features) & NETIF_F_ALL_VLAN)
-		sky2_vlan_mode(dev);
+	if (changed & (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX))
+		sky2_vlan_mode(dev, features);
 
 	return 0;
 }
@@ -4257,11 +4216,6 @@ static const struct ethtool_ops sky2_ethtool_ops = {
 	.get_eeprom_len	= sky2_get_eeprom_len,
 	.get_eeprom	= sky2_get_eeprom,
 	.set_eeprom	= sky2_set_eeprom,
-	.set_sg 	= ethtool_op_set_sg,
-	.set_tx_csum	= sky2_set_tx_csum,
-	.set_tso	= sky2_set_tso,
-	.get_rx_csum	= sky2_get_rx_csum,
-	.set_rx_csum	= sky2_set_rx_csum,
 	.get_strings	= sky2_get_strings,
 	.get_coalesce	= sky2_get_coalesce,
 	.set_coalesce	= sky2_set_coalesce,
@@ -4269,11 +4223,9 @@ static const struct ethtool_ops sky2_ethtool_ops = {
 	.set_ringparam	= sky2_set_ringparam,
 	.get_pauseparam = sky2_get_pauseparam,
 	.set_pauseparam = sky2_set_pauseparam,
-	.phys_id	= sky2_phys_id,
+	.set_phys_id	= sky2_set_phys_id,
 	.get_sset_count = sky2_get_sset_count,
 	.get_ethtool_stats = sky2_get_ethtool_stats,
-	.set_flags	= sky2_set_flags,
-	.get_flags	= ethtool_op_get_flags,
 };
 
 #ifdef CONFIG_SKY2_DEBUG
@@ -4553,6 +4505,8 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 	.ndo_set_mac_address	= sky2_set_mac_address,
 	.ndo_set_multicast_list	= sky2_set_multicast,
 	.ndo_change_mtu		= sky2_change_mtu,
+	.ndo_fix_features	= sky2_fix_features,
+	.ndo_set_features	= sky2_set_features,
 	.ndo_tx_timeout		= sky2_tx_timeout,
 	.ndo_get_stats64	= sky2_get_stats,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -4568,6 +4522,8 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 	.ndo_set_mac_address	= sky2_set_mac_address,
 	.ndo_set_multicast_list	= sky2_set_multicast,
 	.ndo_change_mtu		= sky2_change_mtu,
+	.ndo_fix_features	= sky2_fix_features,
+	.ndo_set_features	= sky2_set_features,
 	.ndo_tx_timeout		= sky2_tx_timeout,
 	.ndo_get_stats64	= sky2_get_stats,
   },
@@ -4600,7 +4556,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	/* Auto speed and flow control */
 	sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
 	if (hw->chip_id != CHIP_ID_YUKON_XL)
-		sky2->flags |= SKY2_FLAG_RX_CHECKSUM;
+		dev->hw_features |= NETIF_F_RXCSUM;
 
 	sky2->flow_mode = FC_BOTH;
 
@@ -4619,18 +4575,21 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 
 	sky2->port = port;
 
-	dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG
-		| NETIF_F_TSO | NETIF_F_GRO;
+	dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
 
 	if (highmem)
 		dev->features |= NETIF_F_HIGHDMA;
 
 	/* Enable receive hashing unless hardware is known broken */
 	if (!(hw->flags & SKY2_HW_RSS_BROKEN))
-		dev->features |= NETIF_F_RXHASH;
+		dev->hw_features |= NETIF_F_RXHASH;
+
+	if (!(hw->flags & SKY2_HW_VLAN_BROKEN)) {
+		dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+		dev->vlan_features |= SKY2_VLAN_OFFLOADS;
+	}
 
-	if (!(hw->flags & SKY2_HW_VLAN_BROKEN))
-		dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+	dev->features |= dev->hw_features;
 
 	/* read the mac address */
 	memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 6861b0e8db9..318c9ae7bf9 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1194,7 +1194,7 @@ enum {
 
 	PHY_ST_PRE_SUP	= 1<<6, /* Bit  6:	Preamble Suppression */
 	PHY_ST_AN_OVER	= 1<<5, /* Bit  5:	Auto-Negotiation Over */
-	PHY_ST_REM_FLT	= 1<<4, /* Bit  4:	Remote Fault Condition Occured */
+	PHY_ST_REM_FLT	= 1<<4, /* Bit  4:	Remote Fault Condition Occurred */
 	PHY_ST_AN_CAP	= 1<<3, /* Bit  3:	Auto-Negotiation Capability */
 	PHY_ST_LSYNC	= 1<<2, /* Bit  2:	Link Synchronized */
 	PHY_ST_JAB_DET	= 1<<1, /* Bit  1:	Jabber Detected */
@@ -1725,8 +1725,8 @@ enum {
 	GM_GPSR_LINK_UP		= 1<<12, /* Bit 12:	Link Up Status */
 	GM_GPSR_PAUSE		= 1<<11, /* Bit 11:	Pause State */
 	GM_GPSR_TX_ACTIVE	= 1<<10, /* Bit 10:	Tx in Progress */
-	GM_GPSR_EXC_COL		= 1<<9,	/* Bit  9:	Excessive Collisions Occured */
-	GM_GPSR_LAT_COL		= 1<<8,	/* Bit  8:	Late Collisions Occured */
+	GM_GPSR_EXC_COL		= 1<<9,	/* Bit  9:	Excessive Collisions Occurred */
+	GM_GPSR_LAT_COL		= 1<<8,	/* Bit  8:	Late Collisions Occurred */
 
 	GM_GPSR_PHY_ST_CH	= 1<<5,	/* Bit  5:	PHY Status Change */
 	GM_GPSR_GIG_SPEED	= 1<<4,	/* Bit  4:	Gigabit Speed (1 = 1000 Mbps) */
@@ -2254,7 +2254,6 @@ struct sky2_port {
 	u8		     wol;		/* WAKE_ bits */
 	u8		     duplex;		/* DUPLEX_HALF, DUPLEX_FULL */
 	u16		     flags;
-#define SKY2_FLAG_RX_CHECKSUM		0x0001
 #define SKY2_FLAG_AUTO_SPEED		0x0002
 #define SKY2_FLAG_AUTO_PAUSE		0x0004
 
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 86cbb9ea2f2..8ec1a9a0bb9 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -853,7 +853,9 @@ static int slip_open(struct tty_struct *tty)
 	/* Done.  We have linked the TTY line to a channel. */
 	rtnl_unlock();
 	tty->receive_room = 65536;	/* We don't flow control */
-	return sl->dev->base_addr;
+
+	/* TTY layer expects 0 on success */
+	return 0;
 
 err_free_bufs:
 	sl_free_bufs(sl);
diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c
index d07c39cb4da..0f29f261fcf 100644
--- a/drivers/net/smc-mca.c
+++ b/drivers/net/smc-mca.c
@@ -156,7 +156,7 @@ static const struct {
    { 14, 15 }
 };
 
-static short smc_mca_adapter_ids[] __initdata = {
+static const short smc_mca_adapter_ids[] __devinitconst = {
 	0x61c8,
 	0x61c9,
 	0x6fc0,
@@ -168,7 +168,7 @@ static short smc_mca_adapter_ids[] __initdata = {
 	0x0000
 };
 
-static char *smc_mca_adapter_names[] __initdata = {
+static const char *const smc_mca_adapter_names[] __devinitconst = {
 	"SMC Ethercard PLUS Elite/A BNC/AUI (WD8013EP/A)",
 	"SMC Ethercard PLUS Elite/A UTP/AUI (WD8013WP/A)",
 	"WD Ethercard PLUS/A (WD8003E/A or WD8003ET/A)",
@@ -199,7 +199,7 @@ static const struct net_device_ops ultramca_netdev_ops = {
 #endif
 };
 
-static int __init ultramca_probe(struct device *gen_dev)
+static int __devinit ultramca_probe(struct device *gen_dev)
 {
 	unsigned short ioaddr;
 	struct net_device *dev;
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 66831f37839..053863aefb1 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1488,9 +1488,9 @@ smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
 				SUPPORTED_TP | SUPPORTED_AUI;
 
 		if (lp->ctl_rspeed == 10)
-			cmd->speed = SPEED_10;
+			ethtool_cmd_speed_set(cmd, SPEED_10);
 		else if (lp->ctl_rspeed == 100)
-			cmd->speed = SPEED_100;
+			ethtool_cmd_speed_set(cmd, SPEED_100);
 
 		cmd->autoneg = AUTONEG_DISABLE;
 		if (lp->mii.phy_id==1)
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 43654a3bb0e..dc4805f473e 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1565,9 +1565,9 @@ smc_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
 				 SUPPORTED_TP | SUPPORTED_AUI;
 
 		if (lp->ctl_rspeed == 10)
-			cmd->speed = SPEED_10;
+			ethtool_cmd_speed_set(cmd, SPEED_10);
 		else if (lp->ctl_rspeed == 100)
-			cmd->speed = SPEED_100;
+			ethtool_cmd_speed_set(cmd, SPEED_100);
 
 		cmd->autoneg = AUTONEG_DISABLE;
 		cmd->transceiver = XCVR_INTERNAL;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 68d48ab6eac..5f53fbbf67b 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -921,7 +921,7 @@ static const char * chip_ids[ 16 ] =  {
  * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not
  * aligned to a 32 bit boundary.  I tell you that does exist!
  * Fortunately the affected register accesses can be easily worked around
- * since we can write zeroes to the preceeding 16 bits without adverse
+ * since we can write zeroes to the preceding 16 bits without adverse
  * effects and use a 32-bit access.
  *
  * Enforce it on any 32-bit capable setup for now.
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 1566259c1f2..c6d47d10590 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -29,6 +29,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/crc32.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -69,6 +71,17 @@ static int debug = 3;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
+struct smsc911x_data;
+
+struct smsc911x_ops {
+	u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg);
+	void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val);
+	void (*rx_readfifo)(struct smsc911x_data *pdata,
+				unsigned int *buf, unsigned int wordcount);
+	void (*tx_writefifo)(struct smsc911x_data *pdata,
+				unsigned int *buf, unsigned int wordcount);
+};
+
 struct smsc911x_data {
 	void __iomem *ioaddr;
 
@@ -116,8 +129,14 @@ struct smsc911x_data {
 	unsigned int clear_bits_mask;
 	unsigned int hashhi;
 	unsigned int hashlo;
+
+	/* register access functions */
+	const struct smsc911x_ops *ops;
 };
 
+/* Easy access to information */
+#define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift))
+
 static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 {
 	if (pdata->config.flags & SMSC911X_USE_32BIT)
@@ -131,13 +150,29 @@ static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 	return 0;
 }
 
+static inline u32
+__smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg)
+{
+	if (pdata->config.flags & SMSC911X_USE_32BIT)
+		return readl(pdata->ioaddr + __smsc_shift(pdata, reg));
+
+	if (pdata->config.flags & SMSC911X_USE_16BIT)
+		return (readw(pdata->ioaddr +
+				__smsc_shift(pdata, reg)) & 0xFFFF) |
+			((readw(pdata->ioaddr +
+			__smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16);
+
+	BUG();
+	return 0;
+}
+
 static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 {
 	u32 data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&pdata->dev_lock, flags);
-	data = __smsc911x_reg_read(pdata, reg);
+	data = pdata->ops->reg_read(pdata, reg);
 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 
 	return data;
@@ -160,13 +195,32 @@ static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
 	BUG();
 }
 
+static inline void
+__smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val)
+{
+	if (pdata->config.flags & SMSC911X_USE_32BIT) {
+		writel(val, pdata->ioaddr + __smsc_shift(pdata, reg));
+		return;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_16BIT) {
+		writew(val & 0xFFFF,
+			pdata->ioaddr + __smsc_shift(pdata, reg));
+		writew((val >> 16) & 0xFFFF,
+			pdata->ioaddr + __smsc_shift(pdata, reg + 2));
+		return;
+	}
+
+	BUG();
+}
+
 static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
 				      u32 val)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&pdata->dev_lock, flags);
-	__smsc911x_reg_write(pdata, reg, val);
+	pdata->ops->reg_write(pdata, reg, val);
 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 }
 
@@ -202,6 +256,40 @@ out:
 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 }
 
+/* Writes a packet to the TX_DATA_FIFO - shifted version */
+static inline void
+smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
+		      unsigned int wordcount)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->dev_lock, flags);
+
+	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+		while (wordcount--)
+			__smsc911x_reg_write_shift(pdata, TX_DATA_FIFO,
+					     swab32(*buf++));
+		goto out;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_32BIT) {
+		writesl(pdata->ioaddr + __smsc_shift(pdata,
+						TX_DATA_FIFO), buf, wordcount);
+		goto out;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_16BIT) {
+		while (wordcount--)
+			__smsc911x_reg_write_shift(pdata,
+						 TX_DATA_FIFO, *buf++);
+		goto out;
+	}
+
+	BUG();
+out:
+	spin_unlock_irqrestore(&pdata->dev_lock, flags);
+}
+
 /* Reads a packet out of the RX_DATA_FIFO */
 static inline void
 smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
@@ -234,6 +322,40 @@ out:
 	spin_unlock_irqrestore(&pdata->dev_lock, flags);
 }
 
+/* Reads a packet out of the RX_DATA_FIFO - shifted version */
+static inline void
+smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf,
+		     unsigned int wordcount)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->dev_lock, flags);
+
+	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+		while (wordcount--)
+			*buf++ = swab32(__smsc911x_reg_read_shift(pdata,
+							    RX_DATA_FIFO));
+		goto out;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_32BIT) {
+		readsl(pdata->ioaddr + __smsc_shift(pdata,
+						RX_DATA_FIFO), buf, wordcount);
+		goto out;
+	}
+
+	if (pdata->config.flags & SMSC911X_USE_16BIT) {
+		while (wordcount--)
+			*buf++ = __smsc911x_reg_read_shift(pdata,
+								RX_DATA_FIFO);
+		goto out;
+	}
+
+	BUG();
+out:
+	spin_unlock_irqrestore(&pdata->dev_lock, flags);
+}
+
 /* waits for MAC not busy, with timeout.  Only called by smsc911x_mac_read
  * and smsc911x_mac_write, so assumes mac_lock is held */
 static int smsc911x_mac_complete(struct smsc911x_data *pdata)
@@ -248,8 +370,8 @@ static int smsc911x_mac_complete(struct smsc911x_data *pdata)
 		if (!(val & MAC_CSR_CMD_CSR_BUSY_))
 			return 0;
 	}
-	SMSC_WARNING(HW, "Timed out waiting for MAC not BUSY. "
-		"MAC_CSR_CMD: 0x%08X", val);
+	SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. "
+		  "MAC_CSR_CMD: 0x%08X", val);
 	return -EIO;
 }
 
@@ -262,7 +384,7 @@ static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset)
 
 	temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
 	if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
-		SMSC_WARNING(HW, "MAC busy at entry");
+		SMSC_WARN(pdata, hw, "MAC busy at entry");
 		return 0xFFFFFFFF;
 	}
 
@@ -277,7 +399,7 @@ static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset)
 	if (likely(smsc911x_mac_complete(pdata) == 0))
 		return smsc911x_reg_read(pdata, MAC_CSR_DATA);
 
-	SMSC_WARNING(HW, "MAC busy after read");
+	SMSC_WARN(pdata, hw, "MAC busy after read");
 	return 0xFFFFFFFF;
 }
 
@@ -291,8 +413,8 @@ static void smsc911x_mac_write(struct smsc911x_data *pdata,
 
 	temp = smsc911x_reg_read(pdata, MAC_CSR_CMD);
 	if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) {
-		SMSC_WARNING(HW,
-			"smsc911x_mac_write failed, MAC busy at entry");
+		SMSC_WARN(pdata, hw,
+			  "smsc911x_mac_write failed, MAC busy at entry");
 		return;
 	}
 
@@ -310,8 +432,7 @@ static void smsc911x_mac_write(struct smsc911x_data *pdata,
 	if (likely(smsc911x_mac_complete(pdata) == 0))
 		return;
 
-	SMSC_WARNING(HW,
-		"smsc911x_mac_write failed, MAC busy after write");
+	SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write");
 }
 
 /* Get a phy register */
@@ -326,8 +447,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
 
 	/* Confirm MII not busy */
 	if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
-		SMSC_WARNING(HW,
-			"MII is busy in smsc911x_mii_read???");
+		SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???");
 		reg = -EIO;
 		goto out;
 	}
@@ -343,7 +463,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
 			goto out;
 		}
 
-	SMSC_WARNING(HW, "Timed out waiting for MII read to finish");
+	SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish");
 	reg = -EIO;
 
 out:
@@ -364,8 +484,7 @@ static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
 
 	/* Confirm MII not busy */
 	if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) {
-		SMSC_WARNING(HW,
-			"MII is busy in smsc911x_mii_write???");
+		SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???");
 		reg = -EIO;
 		goto out;
 	}
@@ -385,7 +504,7 @@ static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
 			goto out;
 		}
 
-	SMSC_WARNING(HW, "Timed out waiting for MII write to finish");
+	SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish");
 	reg = -EIO;
 
 out:
@@ -426,18 +545,20 @@ static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata)
 	unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);
 
 	if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {
-		SMSC_TRACE(HW, "Forcing internal PHY");
+		SMSC_TRACE(pdata, hw, "Forcing internal PHY");
 		pdata->using_extphy = 0;
 	} else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {
-		SMSC_TRACE(HW, "Forcing external PHY");
+		SMSC_TRACE(pdata, hw, "Forcing external PHY");
 		smsc911x_phy_enable_external(pdata);
 		pdata->using_extphy = 1;
 	} else if (hwcfg & HW_CFG_EXT_PHY_DET_) {
-		SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET set, using external PHY");
+		SMSC_TRACE(pdata, hw,
+			   "HW_CFG EXT_PHY_DET set, using external PHY");
 		smsc911x_phy_enable_external(pdata);
 		pdata->using_extphy = 1;
 	} else {
-		SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET clear, using internal PHY");
+		SMSC_TRACE(pdata, hw,
+			   "HW_CFG EXT_PHY_DET clear, using internal PHY");
 		pdata->using_extphy = 0;
 	}
 }
@@ -499,7 +620,7 @@ static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
 		wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3);
 		wrsz >>= 2;
 
-		smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
+		pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
 
 		/* Wait till transmit is done */
 		i = 60;
@@ -509,13 +630,13 @@ static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
 		} while ((i--) && (!status));
 
 		if (!status) {
-			SMSC_WARNING(HW, "Failed to transmit "
-				"during loopback test");
+			SMSC_WARN(pdata, hw,
+				  "Failed to transmit during loopback test");
 			continue;
 		}
 		if (status & TX_STS_ES_) {
-			SMSC_WARNING(HW, "Transmit encountered "
-				"errors during loopback test");
+			SMSC_WARN(pdata, hw,
+				  "Transmit encountered errors during loopback test");
 			continue;
 		}
 
@@ -527,13 +648,13 @@ static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
 		} while ((i--) && (!status));
 
 		if (!status) {
-			SMSC_WARNING(HW,
-				"Failed to receive during loopback test");
+			SMSC_WARN(pdata, hw,
+				  "Failed to receive during loopback test");
 			continue;
 		}
 		if (status & RX_STS_ES_) {
-			SMSC_WARNING(HW, "Receive encountered "
-				"errors during loopback test");
+			SMSC_WARN(pdata, hw,
+				  "Receive encountered errors during loopback test");
 			continue;
 		}
 
@@ -543,12 +664,12 @@ static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
 		rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3);
 		rdsz >>= 2;
 
-		smsc911x_rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
+		pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz);
 
 		if (pktlength != (MIN_PACKET_SIZE + 4)) {
-			SMSC_WARNING(HW, "Unexpected packet size "
-				"during loop back test, size=%d, will retry",
-				pktlength);
+			SMSC_WARN(pdata, hw, "Unexpected packet size "
+				  "during loop back test, size=%d, will retry",
+				  pktlength);
 		} else {
 			unsigned int j;
 			int mismatch = 0;
@@ -560,12 +681,12 @@ static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata)
 				}
 			}
 			if (!mismatch) {
-				SMSC_TRACE(HW, "Successfully verified "
+				SMSC_TRACE(pdata, hw, "Successfully verified "
 					   "loopback packet");
 				return 0;
 			} else {
-				SMSC_WARNING(HW, "Data mismatch "
-					"during loop back test, will retry");
+				SMSC_WARN(pdata, hw, "Data mismatch "
+					  "during loop back test, will retry");
 			}
 		}
 	}
@@ -582,7 +703,7 @@ static int smsc911x_phy_reset(struct smsc911x_data *pdata)
 	BUG_ON(!phy_dev);
 	BUG_ON(!phy_dev->bus);
 
-	SMSC_TRACE(HW, "Performing PHY BCR Reset");
+	SMSC_TRACE(pdata, hw, "Performing PHY BCR Reset");
 	smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET);
 	do {
 		msleep(1);
@@ -591,7 +712,7 @@ static int smsc911x_phy_reset(struct smsc911x_data *pdata)
 	} while ((i--) && (temp & BMCR_RESET));
 
 	if (temp & BMCR_RESET) {
-		SMSC_WARNING(HW, "PHY reset failed to complete.");
+		SMSC_WARN(pdata, hw, "PHY reset failed to complete");
 		return -EIO;
 	}
 	/* Extra delay required because the phy may not be completed with
@@ -695,11 +816,11 @@ static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata)
 		else
 			afc &= ~0xF;
 
-		SMSC_TRACE(HW, "rx pause %s, tx pause %s",
-			(cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
-			(cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+		SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s",
+			   (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+			   (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
 	} else {
-		SMSC_TRACE(HW, "half duplex");
+		SMSC_TRACE(pdata, hw, "half duplex");
 		flow = 0;
 		afc |= 0xF;
 	}
@@ -722,17 +843,17 @@ static void smsc911x_phy_adjust_link(struct net_device *dev)
 
 	if (phy_dev->duplex != pdata->last_duplex) {
 		unsigned int mac_cr;
-		SMSC_TRACE(HW, "duplex state has changed");
+		SMSC_TRACE(pdata, hw, "duplex state has changed");
 
 		spin_lock_irqsave(&pdata->mac_lock, flags);
 		mac_cr = smsc911x_mac_read(pdata, MAC_CR);
 		if (phy_dev->duplex) {
-			SMSC_TRACE(HW,
-				"configuring for full duplex mode");
+			SMSC_TRACE(pdata, hw,
+				   "configuring for full duplex mode");
 			mac_cr |= MAC_CR_FDPX_;
 		} else {
-			SMSC_TRACE(HW,
-				"configuring for half duplex mode");
+			SMSC_TRACE(pdata, hw,
+				   "configuring for half duplex mode");
 			mac_cr &= ~MAC_CR_FDPX_;
 		}
 		smsc911x_mac_write(pdata, MAC_CR, mac_cr);
@@ -744,9 +865,9 @@ static void smsc911x_phy_adjust_link(struct net_device *dev)
 
 	carrier = netif_carrier_ok(dev);
 	if (carrier != pdata->last_carrier) {
-		SMSC_TRACE(HW, "carrier state has changed");
+		SMSC_TRACE(pdata, hw, "carrier state has changed");
 		if (carrier) {
-			SMSC_TRACE(HW, "configuring for carrier OK");
+			SMSC_TRACE(pdata, hw, "configuring for carrier OK");
 			if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) &&
 			    (!pdata->using_extphy)) {
 				/* Restore original GPIO configuration */
@@ -755,7 +876,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev)
 					pdata->gpio_setting);
 			}
 		} else {
-			SMSC_TRACE(HW, "configuring for no carrier");
+			SMSC_TRACE(pdata, hw, "configuring for no carrier");
 			/* Check global setting that LED1
 			 * usage is 10/100 indicator */
 			pdata->gpio_setting = smsc911x_reg_read(pdata,
@@ -787,25 +908,25 @@ static int smsc911x_mii_probe(struct net_device *dev)
 	/* find the first phy */
 	phydev = phy_find_first(pdata->mii_bus);
 	if (!phydev) {
-		pr_err("%s: no PHY found\n", dev->name);
+		netdev_err(dev, "no PHY found\n");
 		return -ENODEV;
 	}
 
-	SMSC_TRACE(PROBE, "PHY: addr %d, phy_id 0x%08X",
-			phydev->addr, phydev->phy_id);
+	SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X",
+		   phydev->addr, phydev->phy_id);
 
 	ret = phy_connect_direct(dev, phydev,
 			&smsc911x_phy_adjust_link, 0,
 			pdata->config.phy_interface);
 
 	if (ret) {
-		pr_err("%s: Could not attach to PHY\n", dev->name);
+		netdev_err(dev, "Could not attach to PHY\n");
 		return ret;
 	}
 
-	pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
-		dev->name, phydev->drv->name,
-		dev_name(&phydev->dev), phydev->irq);
+	netdev_info(dev,
+		    "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+		    phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	/* mask with MAC supported features */
 	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
@@ -818,13 +939,13 @@ static int smsc911x_mii_probe(struct net_device *dev)
 
 #ifdef USE_PHY_WORK_AROUND
 	if (smsc911x_phy_loopbacktest(dev) < 0) {
-		SMSC_WARNING(HW, "Failed Loop Back Test");
+		SMSC_WARN(pdata, hw, "Failed Loop Back Test");
 		return -ENODEV;
 	}
-	SMSC_TRACE(HW, "Passed Loop Back Test");
+	SMSC_TRACE(pdata, hw, "Passed Loop Back Test");
 #endif				/* USE_PHY_WORK_AROUND */
 
-	SMSC_TRACE(HW, "phy initialised successfully");
+	SMSC_TRACE(pdata, hw, "phy initialised successfully");
 	return 0;
 }
 
@@ -860,8 +981,8 @@ static int __devinit smsc911x_mii_init(struct platform_device *pdev,
 		smsc911x_phy_initialise_external(pdata);
 		break;
 	default:
-		SMSC_TRACE(HW, "External PHY is not supported, "
-			"using internal PHY");
+		SMSC_TRACE(pdata, hw, "External PHY is not supported, "
+			   "using internal PHY");
 		pdata->using_extphy = 0;
 		break;
 	}
@@ -872,12 +993,12 @@ static int __devinit smsc911x_mii_init(struct platform_device *pdev,
 	}
 
 	if (mdiobus_register(pdata->mii_bus)) {
-		SMSC_WARNING(PROBE, "Error registering mii bus");
+		SMSC_WARN(pdata, probe, "Error registering mii bus");
 		goto err_out_free_bus_2;
 	}
 
 	if (smsc911x_mii_probe(dev) < 0) {
-		SMSC_WARNING(PROBE, "Error registering mii bus");
+		SMSC_WARN(pdata, probe, "Error registering mii bus");
 		goto err_out_unregister_bus_3;
 	}
 
@@ -913,8 +1034,7 @@ static void smsc911x_tx_update_txcounters(struct net_device *dev)
 			 * does not reference a hardware defined reserved bit
 			 * but rather a driver defined one.
 			 */
-			SMSC_WARNING(HW,
-				"Packet tag reserved bit is high");
+			SMSC_WARN(pdata, hw, "Packet tag reserved bit is high");
 		} else {
 			if (unlikely(tx_stat & TX_STS_ES_)) {
 				dev->stats.tx_errors++;
@@ -977,8 +1097,8 @@ smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes)
 		} while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout);
 
 		if (unlikely(timeout == 0))
-			SMSC_WARNING(HW, "Timed out waiting for "
-				"RX FFWD to finish, RX_DP_CTRL: 0x%08X", val);
+			SMSC_WARN(pdata, hw, "Timed out waiting for "
+				  "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val);
 	} else {
 		unsigned int temp;
 		while (pktwords--)
@@ -1021,8 +1141,8 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
 		smsc911x_rx_counterrors(dev, rxstat);
 
 		if (unlikely(rxstat & RX_STS_ES_)) {
-			SMSC_WARNING(RX_ERR,
-				"Discarding packet with error bit set");
+			SMSC_WARN(pdata, rx_err,
+				  "Discarding packet with error bit set");
 			/* Packet has an error, discard it and continue with
 			 * the next */
 			smsc911x_rx_fastforward(pdata, pktwords);
@@ -1032,8 +1152,8 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
 
 		skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN);
 		if (unlikely(!skb)) {
-			SMSC_WARNING(RX_ERR,
-				"Unable to allocate skb for rx packet");
+			SMSC_WARN(pdata, rx_err,
+				  "Unable to allocate skb for rx packet");
 			/* Drop the packet and stop this polling iteration */
 			smsc911x_rx_fastforward(pdata, pktwords);
 			dev->stats.rx_dropped++;
@@ -1046,8 +1166,8 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
 		/* Align IP on 16B boundary */
 		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, pktlength - 4);
-		smsc911x_rx_readfifo(pdata, (unsigned int *)skb->head,
-				     pktwords);
+		pdata->ops->rx_readfifo(pdata,
+				 (unsigned int *)skb->head, pktwords);
 		skb->protocol = eth_type_trans(skb, dev);
 		skb_checksum_none_assert(skb);
 		netif_receive_skb(skb);
@@ -1083,8 +1203,8 @@ static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata)
 	smsc911x_mac_write(pdata, MAC_CR, mac_cr);
 	smsc911x_mac_write(pdata, HASHH, pdata->hashhi);
 	smsc911x_mac_write(pdata, HASHL, pdata->hashlo);
-	SMSC_TRACE(HW, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
-		mac_cr, pdata->hashhi, pdata->hashlo);
+	SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
+		   mac_cr, pdata->hashhi, pdata->hashlo);
 }
 
 static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata)
@@ -1102,7 +1222,7 @@ static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata)
 
 	/* Check Rx has stopped */
 	if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_)
-		SMSC_WARNING(DRV, "Rx not stopped");
+		SMSC_WARN(pdata, drv, "Rx not stopped");
 
 	/* Perform the update - safe to do now Rx has stopped */
 	smsc911x_rx_multicast_update(pdata);
@@ -1131,7 +1251,7 @@ static int smsc911x_soft_reset(struct smsc911x_data *pdata)
 	} while ((--timeout) && (temp & HW_CFG_SRST_));
 
 	if (unlikely(temp & HW_CFG_SRST_)) {
-		SMSC_WARNING(DRV, "Failed to complete reset");
+		SMSC_WARN(pdata, drv, "Failed to complete reset");
 		return -EIO;
 	}
 	return 0;
@@ -1160,18 +1280,18 @@ static int smsc911x_open(struct net_device *dev)
 
 	/* if the phy is not yet registered, retry later*/
 	if (!pdata->phy_dev) {
-		SMSC_WARNING(HW, "phy_dev is NULL");
+		SMSC_WARN(pdata, hw, "phy_dev is NULL");
 		return -EAGAIN;
 	}
 
 	if (!is_valid_ether_addr(dev->dev_addr)) {
-		SMSC_WARNING(HW, "dev_addr is not a valid MAC address");
+		SMSC_WARN(pdata, hw, "dev_addr is not a valid MAC address");
 		return -EADDRNOTAVAIL;
 	}
 
 	/* Reset the LAN911x */
 	if (smsc911x_soft_reset(pdata)) {
-		SMSC_WARNING(HW, "soft reset failed");
+		SMSC_WARN(pdata, hw, "soft reset failed");
 		return -EIO;
 	}
 
@@ -1191,8 +1311,8 @@ static int smsc911x_open(struct net_device *dev)
 	}
 
 	if (unlikely(timeout == 0))
-		SMSC_WARNING(IFUP,
-			"Timed out waiting for EEPROM busy bit to clear");
+		SMSC_WARN(pdata, ifup,
+			  "Timed out waiting for EEPROM busy bit to clear");
 
 	smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
 
@@ -1210,22 +1330,22 @@ static int smsc911x_open(struct net_device *dev)
 	intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
 
 	if (pdata->config.irq_polarity) {
-		SMSC_TRACE(IFUP, "irq polarity: active high");
+		SMSC_TRACE(pdata, ifup, "irq polarity: active high");
 		intcfg |= INT_CFG_IRQ_POL_;
 	} else {
-		SMSC_TRACE(IFUP, "irq polarity: active low");
+		SMSC_TRACE(pdata, ifup, "irq polarity: active low");
 	}
 
 	if (pdata->config.irq_type) {
-		SMSC_TRACE(IFUP, "irq type: push-pull");
+		SMSC_TRACE(pdata, ifup, "irq type: push-pull");
 		intcfg |= INT_CFG_IRQ_TYPE_;
 	} else {
-		SMSC_TRACE(IFUP, "irq type: open drain");
+		SMSC_TRACE(pdata, ifup, "irq type: open drain");
 	}
 
 	smsc911x_reg_write(pdata, INT_CFG, intcfg);
 
-	SMSC_TRACE(IFUP, "Testing irq handler using IRQ %d", dev->irq);
+	SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq);
 	pdata->software_irq_signal = 0;
 	smp_wmb();
 
@@ -1241,14 +1361,15 @@ static int smsc911x_open(struct net_device *dev)
 	}
 
 	if (!pdata->software_irq_signal) {
-		dev_warn(&dev->dev, "ISR failed signaling test (IRQ %d)\n",
-			 dev->irq);
+		netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n",
+			    dev->irq);
 		return -ENODEV;
 	}
-	SMSC_TRACE(IFUP, "IRQ handler passed test using IRQ %d", dev->irq);
+	SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d",
+		   dev->irq);
 
-	dev_info(&dev->dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
-		 (unsigned long)pdata->ioaddr, dev->irq);
+	netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
+		    (unsigned long)pdata->ioaddr, dev->irq);
 
 	/* Reset the last known duplex and carrier */
 	pdata->last_duplex = -1;
@@ -1313,7 +1434,7 @@ static int smsc911x_stop(struct net_device *dev)
 	if (pdata->phy_dev)
 		phy_stop(pdata->phy_dev);
 
-	SMSC_TRACE(IFDOWN, "Interface stopped");
+	SMSC_TRACE(pdata, ifdown, "Interface stopped");
 	return 0;
 }
 
@@ -1331,8 +1452,8 @@ static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_;
 
 	if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD))
-		SMSC_WARNING(TX_ERR,
-			"Tx data fifo low, space available: %d", freespace);
+		SMSC_WARN(pdata, tx_err,
+			  "Tx data fifo low, space available: %d", freespace);
 
 	/* Word alignment adjustment */
 	tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16;
@@ -1350,7 +1471,7 @@ static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	wrsz += (u32)((ulong)skb->data & 0x3);
 	wrsz >>= 2;
 
-	smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
+	pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz);
 	freespace -= (skb->len + 32);
 	dev_kfree_skb(skb);
 
@@ -1432,7 +1553,7 @@ static void smsc911x_set_multicast_list(struct net_device *dev)
 		 * receiving data */
 		if (!pdata->multicast_update_pending) {
 			unsigned int temp;
-			SMSC_TRACE(HW, "scheduling mcast update");
+			SMSC_TRACE(pdata, hw, "scheduling mcast update");
 			pdata->multicast_update_pending = 1;
 
 			/* Request the hardware to stop, then perform the
@@ -1474,7 +1595,7 @@ static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id)
 	if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) {
 		/* Called when there is a multicast update scheduled and
 		 * it is now safe to complete the update */
-		SMSC_TRACE(INTR, "RX Stop interrupt");
+		SMSC_TRACE(pdata, intr, "RX Stop interrupt");
 		smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_);
 		if (pdata->multicast_update_pending)
 			smsc911x_rx_multicast_update_workaround(pdata);
@@ -1491,7 +1612,7 @@ static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id)
 	}
 
 	if (unlikely(intsts & inten & INT_STS_RXE_)) {
-		SMSC_TRACE(INTR, "RX Error interrupt");
+		SMSC_TRACE(pdata, intr, "RX Error interrupt");
 		smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_);
 		serviced = IRQ_HANDLED;
 	}
@@ -1505,8 +1626,7 @@ static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id)
 			/* Schedule a NAPI poll */
 			__napi_schedule(&pdata->napi);
 		} else {
-			SMSC_WARNING(RX_ERR,
-				"napi_schedule_prep failed");
+			SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed");
 		}
 		serviced = IRQ_HANDLED;
 	}
@@ -1543,7 +1663,7 @@ static int smsc911x_set_mac_address(struct net_device *dev, void *p)
 	smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
 	spin_unlock_irq(&pdata->mac_lock);
 
-	dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr);
+	netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
 
 	return 0;
 }
@@ -1649,9 +1769,9 @@ static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op)
 	int timeout = 100;
 	u32 e2cmd;
 
-	SMSC_TRACE(DRV, "op 0x%08x", op);
+	SMSC_TRACE(pdata, drv, "op 0x%08x", op);
 	if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
-		SMSC_WARNING(DRV, "Busy at start");
+		SMSC_WARN(pdata, drv, "Busy at start");
 		return -EBUSY;
 	}
 
@@ -1664,12 +1784,12 @@ static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op)
 	} while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
 
 	if (!timeout) {
-		SMSC_TRACE(DRV, "TIMED OUT");
+		SMSC_TRACE(pdata, drv, "TIMED OUT");
 		return -EAGAIN;
 	}
 
 	if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
-		SMSC_TRACE(DRV, "Error occured during eeprom operation");
+		SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation");
 		return -EINVAL;
 	}
 
@@ -1682,7 +1802,7 @@ static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata,
 	u32 op = E2P_CMD_EPC_CMD_READ_ | address;
 	int ret;
 
-	SMSC_TRACE(DRV, "address 0x%x", address);
+	SMSC_TRACE(pdata, drv, "address 0x%x", address);
 	ret = smsc911x_eeprom_send_cmd(pdata, op);
 
 	if (!ret)
@@ -1698,7 +1818,7 @@ static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata,
 	u32 temp;
 	int ret;
 
-	SMSC_TRACE(DRV, "address 0x%x, data 0x%x", address, data);
+	SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data);
 	ret = smsc911x_eeprom_send_cmd(pdata, op);
 
 	if (!ret) {
@@ -1811,25 +1931,26 @@ static int __devinit smsc911x_init(struct net_device *dev)
 	struct smsc911x_data *pdata = netdev_priv(dev);
 	unsigned int byte_test;
 
-	SMSC_TRACE(PROBE, "Driver Parameters:");
-	SMSC_TRACE(PROBE, "LAN base: 0x%08lX",
-		(unsigned long)pdata->ioaddr);
-	SMSC_TRACE(PROBE, "IRQ: %d", dev->irq);
-	SMSC_TRACE(PROBE, "PHY will be autodetected.");
+	SMSC_TRACE(pdata, probe, "Driver Parameters:");
+	SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
+		   (unsigned long)pdata->ioaddr);
+	SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq);
+	SMSC_TRACE(pdata, probe, "PHY will be autodetected.");
 
 	spin_lock_init(&pdata->dev_lock);
+	spin_lock_init(&pdata->mac_lock);
 
 	if (pdata->ioaddr == 0) {
-		SMSC_WARNING(PROBE, "pdata->ioaddr: 0x00000000");
+		SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000");
 		return -ENODEV;
 	}
 
 	/* Check byte ordering */
 	byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
-	SMSC_TRACE(PROBE, "BYTE_TEST: 0x%08X", byte_test);
+	SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
 	if (byte_test == 0x43218765) {
-		SMSC_TRACE(PROBE, "BYTE_TEST looks swapped, "
-			"applying WORD_SWAP");
+		SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, "
+			   "applying WORD_SWAP");
 		smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff);
 
 		/* 1 dummy read of BYTE_TEST is needed after a write to
@@ -1840,12 +1961,13 @@ static int __devinit smsc911x_init(struct net_device *dev)
 	}
 
 	if (byte_test != 0x87654321) {
-		SMSC_WARNING(DRV, "BYTE_TEST: 0x%08X", byte_test);
+		SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test);
 		if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) {
-			SMSC_WARNING(PROBE,
-				"top 16 bits equal to bottom 16 bits");
-			SMSC_TRACE(PROBE, "This may mean the chip is set "
-				"for 32 bit while the bus is reading 16 bit");
+			SMSC_WARN(pdata, probe,
+				  "top 16 bits equal to bottom 16 bits");
+			SMSC_TRACE(pdata, probe,
+				   "This may mean the chip is set "
+				   "for 32 bit while the bus is reading 16 bit");
 		}
 		return -ENODEV;
 	}
@@ -1880,23 +2002,27 @@ static int __devinit smsc911x_init(struct net_device *dev)
 		break;
 
 	default:
-		SMSC_WARNING(PROBE, "LAN911x not identified, idrev: 0x%08X",
-			pdata->idrev);
+		SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X",
+			  pdata->idrev);
 		return -ENODEV;
 	}
 
-	SMSC_TRACE(PROBE, "LAN911x identified, idrev: 0x%08X, generation: %d",
-		pdata->idrev, pdata->generation);
+	SMSC_TRACE(pdata, probe,
+		   "LAN911x identified, idrev: 0x%08X, generation: %d",
+		   pdata->idrev, pdata->generation);
 
 	if (pdata->generation == 0)
-		SMSC_WARNING(PROBE,
-			"This driver is not intended for this chip revision");
+		SMSC_WARN(pdata, probe,
+			  "This driver is not intended for this chip revision");
 
 	/* workaround for platforms without an eeprom, where the mac address
 	 * is stored elsewhere and set by the bootloader.  This saves the
 	 * mac address before resetting the device */
-	if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS)
+	if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) {
+		spin_lock_irq(&pdata->mac_lock);
 		smsc911x_read_mac_address(dev);
+		spin_unlock_irq(&pdata->mac_lock);
+	}
 
 	/* Reset the LAN911x */
 	if (smsc911x_soft_reset(pdata))
@@ -1927,7 +2053,7 @@ static int __devexit smsc911x_drv_remove(struct platform_device *pdev)
 	BUG_ON(!pdata->ioaddr);
 	BUG_ON(!pdata->phy_dev);
 
-	SMSC_TRACE(IFDOWN, "Stopping driver.");
+	SMSC_TRACE(pdata, ifdown, "Stopping driver");
 
 	phy_disconnect(pdata->phy_dev);
 	pdata->phy_dev = NULL;
@@ -1951,6 +2077,22 @@ static int __devexit smsc911x_drv_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* standard register acces */
+static const struct smsc911x_ops standard_smsc911x_ops = {
+	.reg_read = __smsc911x_reg_read,
+	.reg_write = __smsc911x_reg_write,
+	.rx_readfifo = smsc911x_rx_readfifo,
+	.tx_writefifo = smsc911x_tx_writefifo,
+};
+
+/* shifted register access */
+static const struct smsc911x_ops shifted_smsc911x_ops = {
+	.reg_read = __smsc911x_reg_read_shift,
+	.reg_write = __smsc911x_reg_write_shift,
+	.rx_readfifo = smsc911x_rx_readfifo_shift,
+	.tx_writefifo = smsc911x_tx_writefifo_shift,
+};
+
 static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
@@ -1961,11 +2103,11 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	int res_size, irq_flags;
 	int retval;
 
-	pr_info("%s: Driver version %s.\n", SMSC_CHIPNAME, SMSC_DRV_VERSION);
+	pr_info("Driver version %s\n", SMSC_DRV_VERSION);
 
 	/* platform data specifies irq & dynamic bus configuration */
 	if (!pdev->dev.platform_data) {
-		pr_warning("%s: platform_data not provided\n", SMSC_CHIPNAME);
+		pr_warn("platform_data not provided\n");
 		retval = -ENODEV;
 		goto out_0;
 	}
@@ -1975,8 +2117,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	if (!res)
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
-		pr_warning("%s: Could not allocate resource.\n",
-			SMSC_CHIPNAME);
+		pr_warn("Could not allocate resource\n");
 		retval = -ENODEV;
 		goto out_0;
 	}
@@ -1984,8 +2125,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq_res) {
-		pr_warning("%s: Could not allocate irq resource.\n",
-			SMSC_CHIPNAME);
+		pr_warn("Could not allocate irq resource\n");
 		retval = -ENODEV;
 		goto out_0;
 	}
@@ -1997,7 +2137,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 
 	dev = alloc_etherdev(sizeof(struct smsc911x_data));
 	if (!dev) {
-		pr_warning("%s: Could not allocate device.\n", SMSC_CHIPNAME);
+		pr_warn("Could not allocate device\n");
 		retval = -ENOMEM;
 		goto out_release_io_1;
 	}
@@ -2017,12 +2157,17 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	pdata->msg_enable = ((1 << debug) - 1);
 
 	if (pdata->ioaddr == NULL) {
-		SMSC_WARNING(PROBE,
-			"Error smsc911x base address invalid");
+		SMSC_WARN(pdata, probe, "Error smsc911x base address invalid");
 		retval = -ENOMEM;
 		goto out_free_netdev_2;
 	}
 
+	/* assume standard, non-shifted, access to HW registers */
+	pdata->ops = &standard_smsc911x_ops;
+	/* apply the right access if shifting is needed */
+	if (config->shift)
+		pdata->ops = &shifted_smsc911x_ops;
+
 	retval = smsc911x_init(dev);
 	if (retval < 0)
 		goto out_unmap_io_3;
@@ -2043,8 +2188,8 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	retval = request_irq(dev->irq, smsc911x_irqhandler,
 			     irq_flags | IRQF_SHARED, dev->name, dev);
 	if (retval) {
-		SMSC_WARNING(PROBE,
-			"Unable to claim requested irq: %d", dev->irq);
+		SMSC_WARN(pdata, probe,
+			  "Unable to claim requested irq: %d", dev->irq);
 		goto out_unmap_io_3;
 	}
 
@@ -2052,19 +2197,16 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 
 	retval = register_netdev(dev);
 	if (retval) {
-		SMSC_WARNING(PROBE,
-			"Error %i registering device", retval);
+		SMSC_WARN(pdata, probe, "Error %i registering device", retval);
 		goto out_unset_drvdata_4;
 	} else {
-		SMSC_TRACE(PROBE, "Network interface: \"%s\"", dev->name);
+		SMSC_TRACE(pdata, probe,
+			   "Network interface: \"%s\"", dev->name);
 	}
 
-	spin_lock_init(&pdata->mac_lock);
-
 	retval = smsc911x_mii_init(pdev, dev);
 	if (retval) {
-		SMSC_WARNING(PROBE,
-			"Error %i initialising mii", retval);
+		SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
 		goto out_unregister_netdev_5;
 	}
 
@@ -2073,10 +2215,12 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	/* Check if mac address has been specified when bringing interface up */
 	if (is_valid_ether_addr(dev->dev_addr)) {
 		smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
-		SMSC_TRACE(PROBE, "MAC Address is specified by configuration");
+		SMSC_TRACE(pdata, probe,
+			   "MAC Address is specified by configuration");
 	} else if (is_valid_ether_addr(pdata->config.mac)) {
 		memcpy(dev->dev_addr, pdata->config.mac, 6);
-		SMSC_TRACE(PROBE, "MAC Address specified by platform data");
+		SMSC_TRACE(pdata, probe,
+			   "MAC Address specified by platform data");
 	} else {
 		/* Try reading mac address from device. if EEPROM is present
 		 * it will already have been set */
@@ -2084,20 +2228,20 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 
 		if (is_valid_ether_addr(dev->dev_addr)) {
 			/* eeprom values are valid  so use them */
-			SMSC_TRACE(PROBE,
-				"Mac Address is read from LAN911x EEPROM");
+			SMSC_TRACE(pdata, probe,
+				   "Mac Address is read from LAN911x EEPROM");
 		} else {
 			/* eeprom values are invalid, generate random MAC */
 			random_ether_addr(dev->dev_addr);
 			smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
-			SMSC_TRACE(PROBE,
-				"MAC Address is set to random_ether_addr");
+			SMSC_TRACE(pdata, probe,
+				   "MAC Address is set to random_ether_addr");
 		}
 	}
 
 	spin_unlock_irq(&pdata->mac_lock);
 
-	dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr);
+	netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
 
 	return 0;
 
diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
index 50f712e99e9..8d67aacf886 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/smsc911x.h
@@ -33,25 +33,21 @@
  * can be successfully looped back */
 #define USE_PHY_WORK_AROUND
 
-#define DPRINTK(nlevel, klevel, fmt, args...) \
-	((void)((NETIF_MSG_##nlevel & pdata->msg_enable) && \
-	printk(KERN_##klevel "%s: %s: " fmt "\n", \
-	pdata->dev->name, __func__, ## args)))
-
 #if USE_DEBUG >= 1
-#define SMSC_WARNING(nlevel, fmt, args...) \
-	DPRINTK(nlevel, WARNING, fmt, ## args)
+#define SMSC_WARN(pdata, nlevel, fmt, args...)			\
+	netif_warn(pdata, nlevel, (pdata)->dev,			\
+		   "%s: " fmt "\n", __func__, ##args)
 #else
-#define SMSC_WARNING(nlevel, fmt, args...) \
-	({ do {} while (0); 0; })
+#define SMSC_WARN(pdata, nlevel, fmt, args...)			\
+	no_printk(fmt "\n", ##args)
 #endif
 
 #if USE_DEBUG >= 2
-#define SMSC_TRACE(nlevel, fmt, args...) \
-	DPRINTK(nlevel, INFO, fmt, ## args)
+#define SMSC_TRACE(pdata, nlevel, fmt, args...)			\
+	netif_info(pdata, nlevel, pdata->dev, fmt "\n", ##args)
 #else
-#define SMSC_TRACE(nlevel, fmt, args...) \
-	({ do {} while (0); 0; })
+#define SMSC_TRACE(pdata, nlevel, fmt, args...)			\
+	no_printk(fmt "\n", ##args)
 #endif
 
 #ifdef CONFIG_DEBUG_SPINLOCK
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index b09ee1c319e..4c92ad8be76 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -364,7 +364,7 @@ static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op)
 	}
 
 	if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
-		smsc_info(HW, "Error occured during eeprom operation");
+		smsc_info(HW, "Error occurred during eeprom operation");
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index cb6bcca9d54..949f124e127 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -994,15 +994,13 @@ spider_net_pass_skb_up(struct spider_net_descr *descr,
 	skb->protocol = eth_type_trans(skb, netdev);
 
 	/* checksum offload */
-	if (card->options.rx_csum) {
+	skb_checksum_none_assert(skb);
+	if (netdev->features & NETIF_F_RXCSUM) {
 		if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
 		       SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
 		     !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
-		else
-			skb_checksum_none_assert(skb);
-	} else
-		skb_checksum_none_assert(skb);
+	}
 
 	if (data_status & SPIDER_NET_VLAN_PACKET) {
 		/* further enhancements: HW-accel VLAN
@@ -2322,14 +2320,15 @@ spider_net_setup_netdev(struct spider_net_card *card)
 	card->aneg_timer.function = spider_net_link_phy;
 	card->aneg_timer.data = (unsigned long) card;
 
-	card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT;
-
 	netif_napi_add(netdev, &card->napi,
 		       spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
 
 	spider_net_setup_netdev_ops(netdev);
 
-	netdev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX;
+	netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
+	if (SPIDER_NET_RX_CSUM_DEFAULT)
+		netdev->features |= NETIF_F_RXCSUM;
+	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX;
 	/* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
 	 *		NETIF_F_HW_VLAN_FILTER */
 
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index 05f74cbdd61..020f64a8fcf 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -429,12 +429,6 @@ struct spider_net_descr_chain {
  * 701b8000 would be correct, but every packets gets that flag */
 #define SPIDER_NET_DESTROY_RX_FLAGS	0x700b8000
 
-/* this will be bigger some time */
-struct spider_net_options {
-	int rx_csum; /* for rx: if 0 ip_summed=NONE,
-			if 1 and hw has verified, ip_summed=UNNECESSARY */
-};
-
 #define SPIDER_NET_DEFAULT_MSG		( NETIF_MSG_DRV | \
 					  NETIF_MSG_PROBE | \
 					  NETIF_MSG_LINK | \
@@ -487,7 +481,6 @@ struct spider_net_card {
 	/* for ethtool */
 	int msg_enable;
 	struct spider_net_extra_stats spider_stats;
-	struct spider_net_options options;
 
 	/* Must be last item in struct */
 	struct spider_net_descr darray[0];
diff --git a/drivers/net/spider_net_ethtool.c b/drivers/net/spider_net_ethtool.c
index 5bae728c382..9c288cd7d17 100644
--- a/drivers/net/spider_net_ethtool.c
+++ b/drivers/net/spider_net_ethtool.c
@@ -58,7 +58,7 @@ spider_net_ethtool_get_settings(struct net_device *netdev,
 	cmd->advertising = (ADVERTISED_1000baseT_Full |
 			     ADVERTISED_FIBRE);
 	cmd->port = PORT_FIBRE;
-	cmd->speed = card->phy.speed;
+	ethtool_cmd_speed_set(cmd, card->phy.speed);
 	cmd->duplex = DUPLEX_FULL;
 
 	return 0;
@@ -115,24 +115,6 @@ spider_net_ethtool_nway_reset(struct net_device *netdev)
 	return 0;
 }
 
-static u32
-spider_net_ethtool_get_rx_csum(struct net_device *netdev)
-{
-	struct spider_net_card *card = netdev_priv(netdev);
-
-	return card->options.rx_csum;
-}
-
-static int
-spider_net_ethtool_set_rx_csum(struct net_device *netdev, u32 n)
-{
-	struct spider_net_card *card = netdev_priv(netdev);
-
-	card->options.rx_csum = n;
-	return 0;
-}
-
-
 static void
 spider_net_ethtool_get_ringparam(struct net_device *netdev,
 				 struct ethtool_ringparam *ering)
@@ -189,9 +171,6 @@ const struct ethtool_ops spider_net_ethtool_ops = {
 	.set_msglevel		= spider_net_ethtool_set_msglevel,
 	.get_link		= ethtool_op_get_link,
 	.nway_reset		= spider_net_ethtool_nway_reset,
-	.get_rx_csum		= spider_net_ethtool_get_rx_csum,
-	.set_rx_csum		= spider_net_ethtool_set_rx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_csum,
 	.get_ringparam          = spider_net_ethtool_get_ringparam,
 	.get_strings		= spider_net_get_strings,
 	.get_sset_count		= spider_net_get_sset_count,
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/stmmac/dwmac1000_core.c
index 6ae4c3f4c63..f20455cbfbb 100644
--- a/drivers/net/stmmac/dwmac1000_core.c
+++ b/drivers/net/stmmac/dwmac1000_core.c
@@ -178,10 +178,11 @@ static void dwmac1000_pmt(void __iomem *ioaddr, unsigned long mode)
 {
 	unsigned int pmt = 0;
 
-	if (mode == WAKE_MAGIC) {
+	if (mode & WAKE_MAGIC) {
 		CHIP_DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
 		pmt |= power_down | magic_pkt_en;
-	} else if (mode == WAKE_UCAST) {
+	}
+	if (mode & WAKE_UCAST) {
 		CHIP_DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
 		pmt |= global_unicast;
 	}
diff --git a/drivers/net/stmmac/dwmac_lib.c b/drivers/net/stmmac/dwmac_lib.c
index d65fab1ba79..e25093510b0 100644
--- a/drivers/net/stmmac/dwmac_lib.c
+++ b/drivers/net/stmmac/dwmac_lib.c
@@ -26,9 +26,9 @@
 
 #undef DWMAC_DMA_DEBUG
 #ifdef DWMAC_DMA_DEBUG
-#define DBG(fmt, args...)  printk(fmt, ## args)
+#define DWMAC_LIB_DBG(fmt, args...)  printk(fmt, ## args)
 #else
-#define DBG(fmt, args...)  do { } while (0)
+#define DWMAC_LIB_DBG(fmt, args...)  do { } while (0)
 #endif
 
 /* CSR1 enables the transmit DMA to check for new descriptor */
@@ -152,7 +152,7 @@ int dwmac_dma_interrupt(void __iomem *ioaddr,
 	/* read the status register (CSR5) */
 	u32 intr_status = readl(ioaddr + DMA_STATUS);
 
-	DBG(INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
+	DWMAC_LIB_DBG(KERN_INFO "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
 #ifdef DWMAC_DMA_DEBUG
 	/* It displays the DMA process states (CSR5 register) */
 	show_tx_process_state(intr_status);
@@ -160,43 +160,43 @@ int dwmac_dma_interrupt(void __iomem *ioaddr,
 #endif
 	/* ABNORMAL interrupts */
 	if (unlikely(intr_status & DMA_STATUS_AIS)) {
-		DBG(INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
+		DWMAC_LIB_DBG(KERN_INFO "CSR5[15] DMA ABNORMAL IRQ: ");
 		if (unlikely(intr_status & DMA_STATUS_UNF)) {
-			DBG(INFO, "transmit underflow\n");
+			DWMAC_LIB_DBG(KERN_INFO "transmit underflow\n");
 			ret = tx_hard_error_bump_tc;
 			x->tx_undeflow_irq++;
 		}
 		if (unlikely(intr_status & DMA_STATUS_TJT)) {
-			DBG(INFO, "transmit jabber\n");
+			DWMAC_LIB_DBG(KERN_INFO "transmit jabber\n");
 			x->tx_jabber_irq++;
 		}
 		if (unlikely(intr_status & DMA_STATUS_OVF)) {
-			DBG(INFO, "recv overflow\n");
+			DWMAC_LIB_DBG(KERN_INFO "recv overflow\n");
 			x->rx_overflow_irq++;
 		}
 		if (unlikely(intr_status & DMA_STATUS_RU)) {
-			DBG(INFO, "receive buffer unavailable\n");
+			DWMAC_LIB_DBG(KERN_INFO "receive buffer unavailable\n");
 			x->rx_buf_unav_irq++;
 		}
 		if (unlikely(intr_status & DMA_STATUS_RPS)) {
-			DBG(INFO, "receive process stopped\n");
+			DWMAC_LIB_DBG(KERN_INFO "receive process stopped\n");
 			x->rx_process_stopped_irq++;
 		}
 		if (unlikely(intr_status & DMA_STATUS_RWT)) {
-			DBG(INFO, "receive watchdog\n");
+			DWMAC_LIB_DBG(KERN_INFO "receive watchdog\n");
 			x->rx_watchdog_irq++;
 		}
 		if (unlikely(intr_status & DMA_STATUS_ETI)) {
-			DBG(INFO, "transmit early interrupt\n");
+			DWMAC_LIB_DBG(KERN_INFO "transmit early interrupt\n");
 			x->tx_early_irq++;
 		}
 		if (unlikely(intr_status & DMA_STATUS_TPS)) {
-			DBG(INFO, "transmit process stopped\n");
+			DWMAC_LIB_DBG(KERN_INFO "transmit process stopped\n");
 			x->tx_process_stopped_irq++;
 			ret = tx_hard_error;
 		}
 		if (unlikely(intr_status & DMA_STATUS_FBI)) {
-			DBG(INFO, "fatal bus error\n");
+			DWMAC_LIB_DBG(KERN_INFO "fatal bus error\n");
 			x->fatal_bus_error_irq++;
 			ret = tx_hard_error;
 		}
@@ -215,7 +215,7 @@ int dwmac_dma_interrupt(void __iomem *ioaddr,
 	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
 	writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
 
-	DBG(INFO, "\n\n");
+	DWMAC_LIB_DBG(KERN_INFO "\n\n");
 	return ret;
 }
 
diff --git a/drivers/net/stmmac/norm_desc.c b/drivers/net/stmmac/norm_desc.c
index cd0cc76f7a1..029c2a2cf52 100644
--- a/drivers/net/stmmac/norm_desc.c
+++ b/drivers/net/stmmac/norm_desc.c
@@ -67,7 +67,7 @@ static int ndesc_get_tx_len(struct dma_desc *p)
 
 /* This function verifies if each incoming frame has some errors
  * and, if required, updates the multicast statistics.
- * In case of success, it returns csum_none becasue the device
+ * In case of success, it returns csum_none because the device
  * is not able to compute the csum in HW. */
 static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 			       struct dma_desc *p)
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
index 5f06c4706ab..2b076b31362 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/stmmac/stmmac.h
@@ -21,7 +21,6 @@
 *******************************************************************************/
 
 #define DRV_MODULE_VERSION	"Nov_2010"
-#include <linux/platform_device.h>
 #include <linux/stmmac.h>
 
 #include "common.h"
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index fd719edc7f7..ae5213a8c4c 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -197,13 +197,6 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
 	}
 }
 
-static u32 stmmac_ethtool_get_rx_csum(struct net_device *dev)
-{
-	struct stmmac_priv *priv = netdev_priv(dev);
-
-	return priv->rx_coe;
-}
-
 static void
 stmmac_get_pauseparam(struct net_device *netdev,
 		      struct ethtool_pauseparam *pause)
@@ -241,20 +234,11 @@ stmmac_set_pauseparam(struct net_device *netdev,
 		new_pause |= FLOW_TX;
 
 	priv->flow_ctrl = new_pause;
+	phy->autoneg = pause->autoneg;
 
 	if (phy->autoneg) {
-		if (netif_running(netdev)) {
-			struct ethtool_cmd cmd;
-			/* auto-negotiation automatically restarted */
-			cmd.cmd = ETHTOOL_NWAY_RST;
-			cmd.supported = phy->supported;
-			cmd.advertising = phy->advertising;
-			cmd.autoneg = phy->autoneg;
-			cmd.speed = phy->speed;
-			cmd.duplex = phy->duplex;
-			cmd.phy_address = phy->addr;
-			ret = phy_ethtool_sset(phy, &cmd);
-		}
+		if (netif_running(netdev))
+			ret = phy_start_aneg(phy);
 	} else
 		priv->hw->mac->flow_ctrl(priv->ioaddr, phy->duplex,
 					 priv->flow_ctrl, priv->pause);
@@ -315,7 +299,7 @@ static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 
 	spin_lock_irq(&priv->lock);
 	if (device_can_wakeup(priv->device)) {
-		wol->supported = WAKE_MAGIC;
+		wol->supported = WAKE_MAGIC | WAKE_UCAST;
 		wol->wolopts = priv->wolopts;
 	}
 	spin_unlock_irq(&priv->lock);
@@ -324,7 +308,7 @@ static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
-	u32 support = WAKE_MAGIC;
+	u32 support = WAKE_MAGIC | WAKE_UCAST;
 
 	if (!device_can_wakeup(priv->device))
 		return -EINVAL;
@@ -358,11 +342,6 @@ static struct ethtool_ops stmmac_ethtool_ops = {
 	.get_regs = stmmac_ethtool_gregs,
 	.get_regs_len = stmmac_ethtool_get_regs_len,
 	.get_link = ethtool_op_get_link,
-	.get_rx_csum = stmmac_ethtool_get_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_ipv6_csum,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
 	.get_pauseparam = stmmac_get_pauseparam,
 	.set_pauseparam = stmmac_set_pauseparam,
 	.get_ethtool_stats = stmmac_get_ethtool_stats,
@@ -370,8 +349,6 @@ static struct ethtool_ops stmmac_ethtool_ops = {
 	.get_wol = stmmac_get_wol,
 	.set_wol = stmmac_set_wol,
 	.get_sset_count	= stmmac_get_sset_count,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = ethtool_op_set_tso,
 };
 
 void stmmac_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 0e5f03135b5..e15c4a0bb96 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -116,9 +116,6 @@ static int tc = TC_DEFAULT;
 module_param(tc, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(tc, "DMA threshold control value");
 
-#define RX_NO_COALESCE	1	/* Always interrupt on completion */
-#define TX_NO_COALESCE	-1	/* No moderation by default */
-
 /* Pay attention to tune this parameter; take care of both
  * hardware capability and network stabitily/performance impact.
  * Many tests showed that ~4ms latency seems to be good enough. */
@@ -139,7 +136,6 @@ static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
 				      NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
 
 static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
-static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev);
 
 /**
  * stmmac_verify_args - verify the driver parameters.
@@ -750,7 +746,6 @@ static void stmmac_dma_interrupt(struct stmmac_priv *priv)
 			priv->hw->dma->dma_mode(priv->ioaddr, tc, SF_DMA_MODE);
 			priv->xstats.threshold = tc;
 		}
-		stmmac_tx_err(priv);
 	} else if (unlikely(status == tx_hard_error))
 		stmmac_tx_err(priv);
 }
@@ -781,21 +776,6 @@ static int stmmac_open(struct net_device *dev)
 
 	stmmac_verify_args();
 
-	ret = stmmac_init_phy(dev);
-	if (unlikely(ret)) {
-		pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
-		return ret;
-	}
-
-	/* Request the IRQ lines */
-	ret = request_irq(dev->irq, stmmac_interrupt,
-			  IRQF_SHARED, dev->name, dev);
-	if (unlikely(ret < 0)) {
-		pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
-		       __func__, dev->irq, ret);
-		return ret;
-	}
-
 #ifdef CONFIG_STMMAC_TIMER
 	priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
 	if (unlikely(priv->tm == NULL)) {
@@ -814,6 +794,11 @@ static int stmmac_open(struct net_device *dev)
 	} else
 		priv->tm->enable = 1;
 #endif
+	ret = stmmac_init_phy(dev);
+	if (unlikely(ret)) {
+		pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
+		goto open_error;
+	}
 
 	/* Create and initialize the TX/RX descriptors chains. */
 	priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
@@ -822,12 +807,11 @@ static int stmmac_open(struct net_device *dev)
 	init_dma_desc_rings(dev);
 
 	/* DMA initialization and SW reset */
-	if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->plat->pbl,
-					 priv->dma_tx_phy,
-					 priv->dma_rx_phy) < 0)) {
-
+	ret = priv->hw->dma->init(priv->ioaddr, priv->plat->pbl,
+				  priv->dma_tx_phy, priv->dma_rx_phy);
+	if (ret < 0) {
 		pr_err("%s: DMA initialization failed\n", __func__);
-		return -1;
+		goto open_error;
 	}
 
 	/* Copy the MAC addr into the HW  */
@@ -843,11 +827,21 @@ static int stmmac_open(struct net_device *dev)
 		pr_info("stmmac: Rx Checksum Offload Engine supported\n");
 	if (priv->plat->tx_coe)
 		pr_info("\tTX Checksum insertion supported\n");
+	netdev_update_features(dev);
 
 	/* Initialise the MMC (if present) to disable all interrupts. */
 	writel(0xffffffff, priv->ioaddr + MMC_HIGH_INTR_MASK);
 	writel(0xffffffff, priv->ioaddr + MMC_LOW_INTR_MASK);
 
+	/* Request the IRQ lines */
+	ret = request_irq(dev->irq, stmmac_interrupt,
+			 IRQF_SHARED, dev->name, dev);
+	if (unlikely(ret < 0)) {
+		pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
+		       __func__, dev->irq, ret);
+		goto open_error;
+	}
+
 	/* Enable the MAC Rx/Tx */
 	stmmac_enable_mac(priv->ioaddr);
 
@@ -878,7 +872,17 @@ static int stmmac_open(struct net_device *dev)
 	napi_enable(&priv->napi);
 	skb_queue_head_init(&priv->rx_recycle);
 	netif_start_queue(dev);
+
 	return 0;
+
+open_error:
+#ifdef CONFIG_STMMAC_TIMER
+	kfree(priv->tm);
+#endif
+	if (priv->phydev)
+		phy_disconnect(priv->phydev);
+
+	return ret;
 }
 
 /**
@@ -927,46 +931,6 @@ static int stmmac_release(struct net_device *dev)
 	return 0;
 }
 
-/*
- * To perform emulated hardware segmentation on skb.
- */
-static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb)
-{
-	struct sk_buff *segs, *curr_skb;
-	int gso_segs = skb_shinfo(skb)->gso_segs;
-
-	/* Estimate the number of fragments in the worst case */
-	if (unlikely(stmmac_tx_avail(priv) < gso_segs)) {
-		netif_stop_queue(priv->dev);
-		TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n",
-		       __func__);
-		if (stmmac_tx_avail(priv) < gso_segs)
-			return NETDEV_TX_BUSY;
-
-		netif_wake_queue(priv->dev);
-	}
-	TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n",
-	       skb, skb->len);
-
-	segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
-	if (IS_ERR(segs))
-		goto sw_tso_end;
-
-	do {
-		curr_skb = segs;
-		segs = segs->next;
-		TX_DBG("\t\tcurrent skb->len: %d, *curr %p,"
-		       "*next %p\n", curr_skb->len, curr_skb, segs);
-		curr_skb->next = NULL;
-		stmmac_xmit(curr_skb, priv->dev);
-	} while (segs);
-
-sw_tso_end:
-	dev_kfree_skb(skb);
-
-	return NETDEV_TX_OK;
-}
-
 static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
 					       struct net_device *dev,
 					       int csum_insertion)
@@ -1044,16 +1008,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 		       !skb_is_gso(skb) ? "isn't" : "is");
 #endif
 
-	if (unlikely(skb_is_gso(skb)))
-		return stmmac_sw_tso(priv, skb);
-
-	if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
-		if (unlikely((!priv->plat->tx_coe) ||
-			     (priv->no_csum_insertion)))
-			skb_checksum_help(skb);
-		else
-			csum_insertion = 1;
-	}
+	csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL);
 
 	desc = priv->dma_tx + entry;
 	first = desc;
@@ -1373,18 +1328,29 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 		return -EINVAL;
 	}
 
+	dev->mtu = new_mtu;
+	netdev_update_features(dev);
+
+	return 0;
+}
+
+static u32 stmmac_fix_features(struct net_device *dev, u32 features)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+
+	if (!priv->rx_coe)
+		features &= ~NETIF_F_RXCSUM;
+	if (!priv->plat->tx_coe)
+		features &= ~NETIF_F_ALL_CSUM;
+
 	/* Some GMAC devices have a bugged Jumbo frame support that
 	 * needs to have the Tx COE disabled for oversized frames
 	 * (due to limited buffer sizes). In this case we disable
 	 * the TX csum insertionin the TDES and not use SF. */
-	if ((priv->plat->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
-		priv->no_csum_insertion = 1;
-	else
-		priv->no_csum_insertion = 0;
+	if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
+		features &= ~NETIF_F_ALL_CSUM;
 
-	dev->mtu = new_mtu;
-
-	return 0;
+	return features;
 }
 
 static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
@@ -1464,6 +1430,7 @@ static const struct net_device_ops stmmac_netdev_ops = {
 	.ndo_start_xmit = stmmac_xmit,
 	.ndo_stop = stmmac_release,
 	.ndo_change_mtu = stmmac_change_mtu,
+	.ndo_fix_features = stmmac_fix_features,
 	.ndo_set_multicast_list = stmmac_multicast_list,
 	.ndo_tx_timeout = stmmac_tx_timeout,
 	.ndo_do_ioctl = stmmac_ioctl,
@@ -1494,8 +1461,8 @@ static int stmmac_probe(struct net_device *dev)
 	dev->netdev_ops = &stmmac_netdev_ops;
 	stmmac_set_ethtool_ops(dev);
 
-	dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA |
-		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	dev->features |= dev->hw_features | NETIF_F_HIGHDMA;
 	dev->watchdog_timeo = msecs_to_jiffies(watchdog);
 #ifdef STMMAC_VLAN_TAG_USED
 	/* Both mac100 and gmac support receive VLAN tag detection */
diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h
index 8db88945b88..4943e975a73 100644
--- a/drivers/net/sunbmac.h
+++ b/drivers/net/sunbmac.h
@@ -185,7 +185,7 @@
 #define BIGMAC_RXCFG_ENABLE    0x00000001 /* Enable the receiver                      */
 #define BIGMAC_RXCFG_FIFO      0x0000000e /* Default rx fthresh...                    */
 #define BIGMAC_RXCFG_PSTRIP    0x00000020 /* Pad byte strip enable                    */
-#define BIGMAC_RXCFG_PMISC     0x00000040 /* Enable promiscous mode                   */
+#define BIGMAC_RXCFG_PMISC     0x00000040 /* Enable promiscuous mode                   */
 #define BIGMAC_RXCFG_DERR      0x00000080 /* Disable error checking                   */
 #define BIGMAC_RXCFG_DCRCS     0x00000100 /* Disable CRC stripping                    */
 #define BIGMAC_RXCFG_ME        0x00000200 /* Receive packets addressed to me          */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index c1a344829b5..ab593009926 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1150,7 +1150,7 @@ static void gem_pcs_reinit_adv(struct gem *gp)
 	val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
 	writel(val, gp->regs + PCS_CFG);
 
-	/* Advertise all capabilities except assymetric
+	/* Advertise all capabilities except asymmetric
 	 * pause.
 	 */
 	val = readl(gp->regs + PCS_MIIADV);
@@ -1294,7 +1294,7 @@ static void gem_begin_auto_negotiation(struct gem *gp, struct ethtool_cmd *ep)
 		autoneg = 1;
 	} else {
 		autoneg = 0;
-		speed = ep->speed;
+		speed = ethtool_cmd_speed(ep);
 		duplex = ep->duplex;
 	}
 
@@ -2642,7 +2642,7 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		/* Return current PHY settings */
 		spin_lock_irq(&gp->lock);
 		cmd->autoneg = gp->want_autoneg;
-		cmd->speed = gp->phy_mii.speed;
+		ethtool_cmd_speed_set(cmd, gp->phy_mii.speed);
 		cmd->duplex = gp->phy_mii.duplex;
 		cmd->advertising = gp->phy_mii.advertising;
 
@@ -2659,7 +2659,7 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
 			 SUPPORTED_Autoneg);
 		cmd->advertising = cmd->supported;
-		cmd->speed = 0;
+		ethtool_cmd_speed_set(cmd, 0);
 		cmd->duplex = cmd->port = cmd->phy_address =
 			cmd->transceiver = cmd->autoneg = 0;
 
@@ -2673,7 +2673,7 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			cmd->advertising = cmd->supported;
 			cmd->transceiver = XCVR_INTERNAL;
 			if (gp->lstate == link_up)
-				cmd->speed = SPEED_1000;
+				ethtool_cmd_speed_set(cmd, SPEED_1000);
 			cmd->duplex = DUPLEX_FULL;
 			cmd->autoneg = 1;
 		}
@@ -2686,6 +2686,7 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 static int gem_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct gem *gp = netdev_priv(dev);
+	u32 speed = ethtool_cmd_speed(cmd);
 
 	/* Verify the settings we care about. */
 	if (cmd->autoneg != AUTONEG_ENABLE &&
@@ -2697,9 +2698,9 @@ static int gem_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		return -EINVAL;
 
 	if (cmd->autoneg == AUTONEG_DISABLE &&
-	    ((cmd->speed != SPEED_1000 &&
-	      cmd->speed != SPEED_100 &&
-	      cmd->speed != SPEED_10) ||
+	    ((speed != SPEED_1000 &&
+	      speed != SPEED_100 &&
+	      speed != SPEED_10) ||
 	     (cmd->duplex != DUPLEX_HALF &&
 	      cmd->duplex != DUPLEX_FULL)))
 		return -EINVAL;
@@ -3146,7 +3147,8 @@ static int __devinit gem_init_one(struct pci_dev *pdev,
 			    gp->phy_mii.def ? gp->phy_mii.def->name : "no");
 
 	/* GEM can do it all... */
-	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_LLTX;
+	dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM;
+	dev->features |= dev->hw_features | NETIF_F_RXCSUM | NETIF_F_LLTX;
 	if (pci_using_dac)
 		dev->features |= NETIF_F_HIGHDMA;
 
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index eb4f59fb01e..30aad54b1b3 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -1383,7 +1383,7 @@ force_link:
 		if (ep == NULL || ep->autoneg == AUTONEG_ENABLE) {
 			hp->sw_bmcr = BMCR_SPEED100;
 		} else {
-			if (ep->speed == SPEED_100)
+			if (ethtool_cmd_speed(ep) == SPEED_100)
 				hp->sw_bmcr = BMCR_SPEED100;
 			else
 				hp->sw_bmcr = 0;
@@ -2401,6 +2401,7 @@ static void happy_meal_set_multicast(struct net_device *dev)
 static int hme_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct happy_meal *hp = netdev_priv(dev);
+	u32 speed;
 
 	cmd->supported =
 		(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
@@ -2420,10 +2421,9 @@ static int hme_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	if (hp->sw_bmcr & BMCR_ANENABLE) {
 		cmd->autoneg = AUTONEG_ENABLE;
-		cmd->speed =
-			(hp->sw_lpa & (LPA_100HALF | LPA_100FULL)) ?
-			SPEED_100 : SPEED_10;
-		if (cmd->speed == SPEED_100)
+		speed = ((hp->sw_lpa & (LPA_100HALF | LPA_100FULL)) ?
+			 SPEED_100 : SPEED_10);
+		if (speed == SPEED_100)
 			cmd->duplex =
 				(hp->sw_lpa & (LPA_100FULL)) ?
 				DUPLEX_FULL : DUPLEX_HALF;
@@ -2433,13 +2433,12 @@ static int hme_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 				DUPLEX_FULL : DUPLEX_HALF;
 	} else {
 		cmd->autoneg = AUTONEG_DISABLE;
-		cmd->speed =
-			(hp->sw_bmcr & BMCR_SPEED100) ?
-			SPEED_100 : SPEED_10;
+		speed = (hp->sw_bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
 		cmd->duplex =
 			(hp->sw_bmcr & BMCR_FULLDPLX) ?
 			DUPLEX_FULL : DUPLEX_HALF;
 	}
+	ethtool_cmd_speed_set(cmd, speed);
 	return 0;
 }
 
@@ -2452,8 +2451,8 @@ static int hme_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	    cmd->autoneg != AUTONEG_DISABLE)
 		return -EINVAL;
 	if (cmd->autoneg == AUTONEG_DISABLE &&
-	    ((cmd->speed != SPEED_100 &&
-	      cmd->speed != SPEED_10) ||
+	    ((ethtool_cmd_speed(cmd) != SPEED_100 &&
+	      ethtool_cmd_speed(cmd) != SPEED_10) ||
 	     (cmd->duplex != DUPLEX_HALF &&
 	      cmd->duplex != DUPLEX_FULL)))
 		return -EINVAL;
@@ -2788,7 +2787,8 @@ static int __devinit happy_meal_sbus_probe_one(struct platform_device *op, int i
 	dev->ethtool_ops = &hme_ethtool_ops;
 
 	/* Happy Meal can do it all... */
-	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM;
+	dev->features |= dev->hw_features | NETIF_F_RXCSUM;
 
 	dev->irq = op->archdata.irqs[0];
 
@@ -3113,7 +3113,8 @@ static int __devinit happy_meal_pci_probe(struct pci_dev *pdev,
 	dev->dma = 0;
 
 	/* Happy Meal can do it all... */
-	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM;
+	dev->features |= dev->hw_features | NETIF_F_RXCSUM;
 
 #if defined(CONFIG_SBUS) && defined(CONFIG_PCI)
 	/* Hook up PCI register/descriptor accessors. */
@@ -3237,15 +3238,18 @@ static void happy_meal_pci_exit(void)
 #endif
 
 #ifdef CONFIG_SBUS
+static const struct of_device_id hme_sbus_match[];
 static int __devinit hme_sbus_probe(struct platform_device *op)
 {
+	const struct of_device_id *match;
 	struct device_node *dp = op->dev.of_node;
 	const char *model = of_get_property(dp, "model", NULL);
 	int is_qfe;
 
-	if (!op->dev.of_match)
+	match = of_match_device(hme_sbus_match, &op->dev);
+	if (!match)
 		return -EINVAL;
-	is_qfe = (op->dev.of_match->data != NULL);
+	is_qfe = (match->data != NULL);
 
 	if (!is_qfe && model && !strcmp(model, "SUNW,sbus-qfe"))
 		is_qfe = 1;
diff --git a/drivers/net/sunhme.h b/drivers/net/sunhme.h
index 756b5bf3aa8..64f278360d8 100644
--- a/drivers/net/sunhme.h
+++ b/drivers/net/sunhme.h
@@ -223,7 +223,7 @@
 /* BigMac receive config register. */
 #define BIGMAC_RXCFG_ENABLE   0x00000001 /* Enable the receiver             */
 #define BIGMAC_RXCFG_PSTRIP   0x00000020 /* Pad byte strip enable           */
-#define BIGMAC_RXCFG_PMISC    0x00000040 /* Enable promiscous mode          */
+#define BIGMAC_RXCFG_PMISC    0x00000040 /* Enable promiscuous mode          */
 #define BIGMAC_RXCFG_DERR     0x00000080 /* Disable error checking          */
 #define BIGMAC_RXCFG_DCRCS    0x00000100 /* Disable CRC stripping           */
 #define BIGMAC_RXCFG_REJME    0x00000200 /* Reject packets addressed to me  */
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index b6eec8cea20..7ca51cebcdd 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -119,13 +119,13 @@ struct tc35815_regs {
 /*
  * Bit assignments
  */
-/* DMA_Ctl bit asign ------------------------------------------------------- */
+/* DMA_Ctl bit assign ------------------------------------------------------- */
 #define DMA_RxAlign	       0x00c00000 /* 1:Reception Alignment	     */
 #define DMA_RxAlign_1	       0x00400000
 #define DMA_RxAlign_2	       0x00800000
 #define DMA_RxAlign_3	       0x00c00000
 #define DMA_M66EnStat	       0x00080000 /* 1:66MHz Enable State	     */
-#define DMA_IntMask	       0x00040000 /* 1:Interupt mask		     */
+#define DMA_IntMask	       0x00040000 /* 1:Interrupt mask		     */
 #define DMA_SWIntReq	       0x00020000 /* 1:Software Interrupt request    */
 #define DMA_TxWakeUp	       0x00010000 /* 1:Transmit Wake Up		     */
 #define DMA_RxBigE	       0x00008000 /* 1:Receive Big Endian	     */
@@ -134,11 +134,11 @@ struct tc35815_regs {
 #define DMA_PowrMgmnt	       0x00001000 /* 1:Power Management		     */
 #define DMA_DmBurst_Mask       0x000001fc /* DMA Burst size		     */
 
-/* RxFragSize bit asign ---------------------------------------------------- */
+/* RxFragSize bit assign ---------------------------------------------------- */
 #define RxFrag_EnPack	       0x00008000 /* 1:Enable Packing		     */
 #define RxFrag_MinFragMask     0x00000ffc /* Minimum Fragment		     */
 
-/* MAC_Ctl bit asign ------------------------------------------------------- */
+/* MAC_Ctl bit assign ------------------------------------------------------- */
 #define MAC_Link10	       0x00008000 /* 1:Link Status 10Mbits	     */
 #define MAC_EnMissRoll	       0x00002000 /* 1:Enable Missed Roll	     */
 #define MAC_MissRoll	       0x00000400 /* 1:Missed Roll		     */
@@ -152,7 +152,7 @@ struct tc35815_regs {
 #define MAC_HaltImm	       0x00000002 /* 1:Halt Immediate		     */
 #define MAC_HaltReq	       0x00000001 /* 1:Halt request		     */
 
-/* PROM_Ctl bit asign ------------------------------------------------------ */
+/* PROM_Ctl bit assign ------------------------------------------------------ */
 #define PROM_Busy	       0x00008000 /* 1:Busy (Start Operation)	     */
 #define PROM_Read	       0x00004000 /*10:Read operation		     */
 #define PROM_Write	       0x00002000 /*01:Write operation		     */
@@ -162,7 +162,7 @@ struct tc35815_regs {
 #define PROM_Addr_Ena	       0x00000030 /*11xxxx:PROM Write enable	     */
 					  /*00xxxx:	      disable	     */
 
-/* CAM_Ctl bit asign ------------------------------------------------------- */
+/* CAM_Ctl bit assign ------------------------------------------------------- */
 #define CAM_CompEn	       0x00000010 /* 1:CAM Compare Enable	     */
 #define CAM_NegCAM	       0x00000008 /* 1:Reject packets CAM recognizes,*/
 					  /*			accept other */
@@ -170,7 +170,7 @@ struct tc35815_regs {
 #define CAM_GroupAcc	       0x00000002 /* 1:Multicast assept		     */
 #define CAM_StationAcc	       0x00000001 /* 1:unicast accept		     */
 
-/* CAM_Ena bit asign ------------------------------------------------------- */
+/* CAM_Ena bit assign ------------------------------------------------------- */
 #define CAM_ENTRY_MAX		       21   /* CAM Data entry max count	     */
 #define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits)  */
 #define CAM_Ena_Bit(index)	(1 << (index))
@@ -178,7 +178,7 @@ struct tc35815_regs {
 #define CAM_ENTRY_SOURCE	1
 #define CAM_ENTRY_MACCTL	20
 
-/* Tx_Ctl bit asign -------------------------------------------------------- */
+/* Tx_Ctl bit assign -------------------------------------------------------- */
 #define Tx_En		       0x00000001 /* 1:Transmit enable		     */
 #define Tx_TxHalt	       0x00000002 /* 1:Transmit Halt Request	     */
 #define Tx_NoPad	       0x00000004 /* 1:Suppress Padding		     */
@@ -192,7 +192,7 @@ struct tc35815_regs {
 #define Tx_EnTxPar	       0x00002000 /* 1:Enable Transmit Parity	     */
 #define Tx_EnComp	       0x00004000 /* 1:Enable Completion	     */
 
-/* Tx_Stat bit asign ------------------------------------------------------- */
+/* Tx_Stat bit assign ------------------------------------------------------- */
 #define Tx_TxColl_MASK	       0x0000000F /* Tx Collision Count		     */
 #define Tx_ExColl	       0x00000010 /* Excessive Collision	     */
 #define Tx_TXDefer	       0x00000020 /* Transmit Defered		     */
@@ -208,7 +208,7 @@ struct tc35815_regs {
 #define Tx_Halted	       0x00008000 /* Tx Halted			     */
 #define Tx_SQErr	       0x00010000 /* Signal Quality Error(SQE)	     */
 
-/* Rx_Ctl bit asign -------------------------------------------------------- */
+/* Rx_Ctl bit assign -------------------------------------------------------- */
 #define Rx_EnGood	       0x00004000 /* 1:Enable Good		     */
 #define Rx_EnRxPar	       0x00002000 /* 1:Enable Receive Parity	     */
 #define Rx_EnLongErr	       0x00000800 /* 1:Enable Long Error	     */
@@ -222,7 +222,7 @@ struct tc35815_regs {
 #define Rx_RxHalt	       0x00000002 /* 1:Receive Halt Request	     */
 #define Rx_RxEn		       0x00000001 /* 1:Receive Intrrupt Enable	     */
 
-/* Rx_Stat bit asign ------------------------------------------------------- */
+/* Rx_Stat bit assign ------------------------------------------------------- */
 #define Rx_Halted	       0x00008000 /* Rx Halted			     */
 #define Rx_Good		       0x00004000 /* Rx Good			     */
 #define Rx_RxPar	       0x00002000 /* Rx Parity Error		     */
@@ -238,7 +238,7 @@ struct tc35815_regs {
 
 #define Rx_Stat_Mask	       0x0000FFF0 /* Rx All Status Mask		     */
 
-/* Int_En bit asign -------------------------------------------------------- */
+/* Int_En bit assign -------------------------------------------------------- */
 #define Int_NRAbtEn	       0x00000800 /* 1:Non-recoverable Abort Enable  */
 #define Int_TxCtlCmpEn	       0x00000400 /* 1:Transmit Ctl Complete Enable  */
 #define Int_DmParErrEn	       0x00000200 /* 1:DMA Parity Error Enable	     */
@@ -253,7 +253,7 @@ struct tc35815_regs {
 #define Int_FDAExEn	       0x00000001 /* 1:Free Descriptor Area	     */
 					  /*		   Exhausted Enable  */
 
-/* Int_Src bit asign ------------------------------------------------------- */
+/* Int_Src bit assign ------------------------------------------------------- */
 #define Int_NRabt	       0x00004000 /* 1:Non Recoverable error	     */
 #define Int_DmParErrStat       0x00002000 /* 1:DMA Parity Error & Clear	     */
 #define Int_BLEx	       0x00001000 /* 1:Buffer List Empty & Clear     */
@@ -270,8 +270,8 @@ struct tc35815_regs {
 #define Int_IntMacRx	       0x00000002 /* 1:Rx controller & Clear	     */
 #define Int_IntMacTx	       0x00000001 /* 1:Tx controller & Clear	     */
 
-/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup	       0x00001000 /* 1:Preamble Supress		     */
+/* MD_CA bit assign --------------------------------------------------------- */
+#define MD_CA_PreSup	       0x00001000 /* 1:Preamble Suppress		     */
 #define MD_CA_Busy	       0x00000800 /* 1:Busy (Start Operation)	     */
 #define MD_CA_Wr	       0x00000400 /* 1:Write 0:Read		     */
 
@@ -296,7 +296,7 @@ struct BDesc {
 
 #define FD_ALIGN	16
 
-/* Frame Descripter bit asign ---------------------------------------------- */
+/* Frame Descripter bit assign ---------------------------------------------- */
 #define FD_FDLength_MASK       0x0000FFFF /* Length MASK		     */
 #define FD_BDCnt_MASK	       0x001F0000 /* BD count MASK in FD	     */
 #define FD_FrmOpt_MASK	       0x7C000000 /* Frame option MASK		     */
@@ -309,8 +309,8 @@ struct BDesc {
 #define FD_Next_EOL	       0x00000001 /* FD EOL indicator		     */
 #define FD_BDCnt_SHIFT	       16
 
-/* Buffer Descripter bit asign --------------------------------------------- */
-#define BD_BuffLength_MASK     0x0000FFFF /* Recieve Data Size		     */
+/* Buffer Descripter bit assign --------------------------------------------- */
+#define BD_BuffLength_MASK     0x0000FFFF /* Receive Data Size		     */
 #define BD_RxBDID_MASK	       0x00FF0000 /* BD ID Number MASK		     */
 #define BD_RxBDSeqN_MASK       0x7F000000 /* Rx BD Sequence Number	     */
 #define BD_CownsBD	       0x80000000 /* BD Controller owner bit	     */
@@ -339,7 +339,7 @@ struct BDesc {
 #define TX_THRESHOLD	1024
 /* used threshold with packet max byte for low pci transfer ability.*/
 #define TX_THRESHOLD_MAX 1536
-/* setting threshold max value when overrun error occured this count. */
+/* setting threshold max value when overrun error occurred this count. */
 #define TX_THRESHOLD_KEEP_LIMIT 10
 
 /* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 3397618d4d9..80fbee0d40a 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -645,7 +645,7 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
 	if (cmd != SIOCDEVPRIVATE) {
 		error = copy_from_user(data, ifr->ifr_data, sizeof(data));
 		if (error) {
-			pr_err("cant copy from user\n");
+			pr_err("can't copy from user\n");
 			RET(-EFAULT);
 		}
 		DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
@@ -999,7 +999,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
  *
  * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
  * filled and packets will be dropped by nic without getting into host or
- * cousing interrupt. Anyway, in that condition, host has no chance to proccess
+ * cousing interrupt. Anyway, in that condition, host has no chance to process
  * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
  */
 
@@ -1200,8 +1200,8 @@ static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd)
 	RET();
 }
 
-/* bdx_rx_receive - recieves full packets from RXD fifo and pass them to OS
- * NOTE: a special treatment is given to non-continous descriptors
+/* bdx_rx_receive - receives full packets from RXD fifo and pass them to OS
+ * NOTE: a special treatment is given to non-continuous descriptors
  * that start near the end, wraps around and continue at the beginning. a second
  * part is copied right after the first, and then descriptor is interpreted as
  * normal. fifo has an extra space to allow such operations
@@ -1584,9 +1584,9 @@ err_mem:
 }
 
 /*
- * bdx_tx_space - calculates avalable space in TX fifo
+ * bdx_tx_space - calculates available space in TX fifo
  * @priv - NIC private structure
- * Returns avaliable space in TX fifo in bytes
+ * Returns available space in TX fifo in bytes
  */
 static inline int bdx_tx_space(struct bdx_priv *priv)
 {
@@ -2017,9 +2017,11 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ndev->irq = pdev->irq;
 		ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO
 		    | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
-		    NETIF_F_HW_VLAN_FILTER
+		    NETIF_F_HW_VLAN_FILTER | NETIF_F_RXCSUM
 		    /*| NETIF_F_FRAGLIST */
 		    ;
+		ndev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+			NETIF_F_TSO | NETIF_F_HW_VLAN_TX;
 
 		if (pci_using_dac)
 			ndev->features |= NETIF_F_HIGHDMA;
@@ -2149,7 +2151,7 @@ static int bdx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 
 	ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
 	ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
-	ecmd->speed = SPEED_10000;
+	ethtool_cmd_speed_set(ecmd, SPEED_10000);
 	ecmd->duplex = DUPLEX_FULL;
 	ecmd->port = PORT_FIBRE;
 	ecmd->transceiver = XCVR_EXTERNAL;	/* what does it mean? */
@@ -2188,24 +2190,6 @@ bdx_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
 }
 
 /*
- * bdx_get_rx_csum - report whether receive checksums are turned on or off
- * @netdev
- */
-static u32 bdx_get_rx_csum(struct net_device *netdev)
-{
-	return 1;		/* always on */
-}
-
-/*
- * bdx_get_tx_csum - report whether transmit checksums are turned on or off
- * @netdev
- */
-static u32 bdx_get_tx_csum(struct net_device *netdev)
-{
-	return (netdev->features & NETIF_F_IP_CSUM) != 0;
-}
-
-/*
  * bdx_get_coalesce - get interrupt coalescing parameters
  * @netdev
  * @ecoal
@@ -2424,10 +2408,6 @@ static void bdx_set_ethtool_ops(struct net_device *netdev)
 		.set_coalesce = bdx_set_coalesce,
 		.get_ringparam = bdx_get_ringparam,
 		.set_ringparam = bdx_set_ringparam,
-		.get_rx_csum = bdx_get_rx_csum,
-		.get_tx_csum = bdx_get_tx_csum,
-		.get_sg = ethtool_op_get_sg,
-		.get_tso = ethtool_op_get_tso,
 		.get_strings = bdx_get_strings,
 		.get_sset_count = bdx_get_sset_count,
 		.get_ethtool_stats = bdx_get_ethtool_stats,
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index b6ba8601e2b..c5642fefc9e 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -502,7 +502,7 @@ struct txd_desc {
 #define  GMAC_RX_FILTER_ACRC  0x0010	/* accept crc error */
 #define  GMAC_RX_FILTER_AM    0x0008	/* accept multicast */
 #define  GMAC_RX_FILTER_AB    0x0004	/* accept broadcast */
-#define  GMAC_RX_FILTER_PRM   0x0001	/* [0:1] promiscous mode */
+#define  GMAC_RX_FILTER_PRM   0x0001	/* [0:1] promiscuous mode */
 
 #define  MAX_FRAME_AB_VAL       0x3fff	/* 13:0 */
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 73c942d85f0..db19332a7d8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -62,12 +62,36 @@
 
 #include "tg3.h"
 
+/* Functions & macros to verify TG3_FLAGS types */
+
+static inline int _tg3_flag(enum TG3_FLAGS flag, unsigned long *bits)
+{
+	return test_bit(flag, bits);
+}
+
+static inline void _tg3_flag_set(enum TG3_FLAGS flag, unsigned long *bits)
+{
+	set_bit(flag, bits);
+}
+
+static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits)
+{
+	clear_bit(flag, bits);
+}
+
+#define tg3_flag(tp, flag)				\
+	_tg3_flag(TG3_FLAG_##flag, (tp)->tg3_flags)
+#define tg3_flag_set(tp, flag)				\
+	_tg3_flag_set(TG3_FLAG_##flag, (tp)->tg3_flags)
+#define tg3_flag_clear(tp, flag)			\
+	_tg3_flag_clear(TG3_FLAG_##flag, (tp)->tg3_flags)
+
 #define DRV_MODULE_NAME		"tg3"
 #define TG3_MAJ_NUM			3
-#define TG3_MIN_NUM			117
+#define TG3_MIN_NUM			119
 #define DRV_MODULE_VERSION	\
 	__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE	"January 25, 2011"
+#define DRV_MODULE_RELDATE	"May 18, 2011"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -85,26 +109,25 @@
 /* length of time before we decide the hardware is borked,
  * and dev->tx_timeout() should be called to fix the problem
  */
+
 #define TG3_TX_TIMEOUT			(5 * HZ)
 
 /* hardware minimum and maximum for a single frame's data payload */
 #define TG3_MIN_MTU			60
 #define TG3_MAX_MTU(tp)	\
-	((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) ? 9000 : 1500)
+	(tg3_flag(tp, JUMBO_CAPABLE) ? 9000 : 1500)
 
 /* These numbers seem to be hard coded in the NIC firmware somehow.
  * You can't change the ring sizes, but you can change where you place
  * them in the NIC onboard memory.
  */
 #define TG3_RX_STD_RING_SIZE(tp) \
-	((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || \
-	  GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) ? \
-	 RX_STD_MAX_SIZE_5717 : 512)
+	(tg3_flag(tp, LRG_PROD_RING_CAP) ? \
+	 TG3_RX_STD_MAX_SIZE_5717 : TG3_RX_STD_MAX_SIZE_5700)
 #define TG3_DEF_RX_RING_PENDING		200
 #define TG3_RX_JMB_RING_SIZE(tp) \
-	((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || \
-	  GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) ? \
-	 1024 : 256)
+	(tg3_flag(tp, LRG_PROD_RING_CAP) ? \
+	 TG3_RX_JMB_MAX_SIZE_5717 : TG3_RX_JMB_MAX_SIZE_5700)
 #define TG3_DEF_RX_JUMBO_RING_PENDING	100
 #define TG3_RSS_INDIR_TBL_SIZE		128
 
@@ -167,11 +190,6 @@
 
 #define TG3_RAW_IP_ALIGN 2
 
-/* number of ETHTOOL_GSTATS u64's */
-#define TG3_NUM_STATS		(sizeof(struct tg3_ethtool_stats)/sizeof(u64))
-
-#define TG3_NUM_TEST		6
-
 #define TG3_FW_UPDATE_TIMEOUT_SEC	5
 
 #define FIRMWARE_TG3		"tigon/tg3.bin"
@@ -266,6 +284,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57791)},
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57795)},
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5719)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5720)},
 	{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
 	{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
 	{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
@@ -280,7 +299,7 @@ MODULE_DEVICE_TABLE(pci, tg3_pci_tbl);
 
 static const struct {
 	const char string[ETH_GSTRING_LEN];
-} ethtool_stats_keys[TG3_NUM_STATS] = {
+} ethtool_stats_keys[] = {
 	{ "rx_octets" },
 	{ "rx_fragments" },
 	{ "rx_ucast_packets" },
@@ -356,12 +375,17 @@ static const struct {
 	{ "ring_status_update" },
 	{ "nic_irqs" },
 	{ "nic_avoided_irqs" },
-	{ "nic_tx_threshold_hit" }
+	{ "nic_tx_threshold_hit" },
+
+	{ "mbuf_lwm_thresh_hit" },
 };
 
+#define TG3_NUM_STATS	ARRAY_SIZE(ethtool_stats_keys)
+
+
 static const struct {
 	const char string[ETH_GSTRING_LEN];
-} ethtool_test_keys[TG3_NUM_TEST] = {
+} ethtool_test_keys[] = {
 	{ "nvram test     (online) " },
 	{ "link test      (online) " },
 	{ "register test  (offline)" },
@@ -370,6 +394,9 @@ static const struct {
 	{ "interrupt test (offline)" },
 };
 
+#define TG3_NUM_TEST	ARRAY_SIZE(ethtool_test_keys)
+
+
 static void tg3_write32(struct tg3 *tp, u32 off, u32 val)
 {
 	writel(val, tp->regs + off);
@@ -467,8 +494,7 @@ static u32 tg3_read_indirect_mbox(struct tg3 *tp, u32 off)
  */
 static void _tw32_flush(struct tg3 *tp, u32 off, u32 val, u32 usec_wait)
 {
-	if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) ||
-	    (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+	if (tg3_flag(tp, PCIX_TARGET_HWBUG) || tg3_flag(tp, ICH_WORKAROUND))
 		/* Non-posted methods */
 		tp->write32(tp, off, val);
 	else {
@@ -488,8 +514,7 @@ static void _tw32_flush(struct tg3 *tp, u32 off, u32 val, u32 usec_wait)
 static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
 {
 	tp->write32_mbox(tp, off, val);
-	if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+	if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND))
 		tp->read32_mbox(tp, off);
 }
 
@@ -497,9 +522,9 @@ static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
 {
 	void __iomem *mbox = tp->regs + off;
 	writel(val, mbox);
-	if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
+	if (tg3_flag(tp, TXD_MBOX_HWBUG))
 		writel(val, mbox);
-	if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+	if (tg3_flag(tp, MBOX_WRITE_REORDER))
 		readl(mbox);
 }
 
@@ -528,12 +553,12 @@ static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val)
 {
 	unsigned long flags;
 
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) &&
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 &&
 	    (off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC))
 		return;
 
 	spin_lock_irqsave(&tp->indirect_lock, flags);
-	if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) {
+	if (tg3_flag(tp, SRAM_USE_CONFIG)) {
 		pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
 		pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
 
@@ -553,14 +578,14 @@ static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val)
 {
 	unsigned long flags;
 
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) &&
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 &&
 	    (off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC)) {
 		*val = 0;
 		return;
 	}
 
 	spin_lock_irqsave(&tp->indirect_lock, flags);
-	if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) {
+	if (tg3_flag(tp, SRAM_USE_CONFIG)) {
 		pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
 		pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
 
@@ -597,7 +622,7 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum)
 	int ret = 0;
 	u32 status, req, gnt;
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
+	if (!tg3_flag(tp, ENABLE_APE))
 		return 0;
 
 	switch (locknum) {
@@ -643,7 +668,7 @@ static void tg3_ape_unlock(struct tg3 *tp, int locknum)
 {
 	u32 gnt;
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
+	if (!tg3_flag(tp, ENABLE_APE))
 		return;
 
 	switch (locknum) {
@@ -687,14 +712,14 @@ static void tg3_enable_ints(struct tg3 *tp)
 		struct tg3_napi *tnapi = &tp->napi[i];
 
 		tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
-		if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
+		if (tg3_flag(tp, 1SHOT_MSI))
 			tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
 
 		tp->coal_now |= tnapi->coal_now;
 	}
 
 	/* Force an initial interrupt */
-	if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
+	if (!tg3_flag(tp, TAGGED_STATUS) &&
 	    (tp->napi[0].hw_status->status & SD_STATUS_UPDATED))
 		tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
 	else
@@ -710,9 +735,7 @@ static inline unsigned int tg3_has_work(struct tg3_napi *tnapi)
 	unsigned int work_exists = 0;
 
 	/* check for phy events */
-	if (!(tp->tg3_flags &
-	      (TG3_FLAG_USE_LINKCHG_REG |
-	       TG3_FLAG_POLL_SERDES))) {
+	if (!(tg3_flag(tp, USE_LINKCHG_REG) || tg3_flag(tp, POLL_SERDES))) {
 		if (sblk->status & SD_STATUS_LINK_CHG)
 			work_exists = 1;
 	}
@@ -740,8 +763,7 @@ static void tg3_int_reenable(struct tg3_napi *tnapi)
 	 * The last_tag we write above tells the chip which piece of
 	 * work we've completed.
 	 */
-	if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
-	    tg3_has_work(tnapi))
+	if (!tg3_flag(tp, TAGGED_STATUS) && tg3_has_work(tnapi))
 		tw32(HOSTCC_MODE, tp->coalesce_mode |
 		     HOSTCC_MODE_ENABLE | tnapi->coal_now);
 }
@@ -751,8 +773,7 @@ static void tg3_switch_clocks(struct tg3 *tp)
 	u32 clock_ctrl;
 	u32 orig_clock_ctrl;
 
-	if ((tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) ||
-	    (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
+	if (tg3_flag(tp, CPMU_PRESENT) || tg3_flag(tp, 5780_CLASS))
 		return;
 
 	clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
@@ -763,7 +784,7 @@ static void tg3_switch_clocks(struct tg3 *tp)
 		       0x1f);
 	tp->pci_clock_ctrl = clock_ctrl;
 
-	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+	if (tg3_flag(tp, 5705_PLUS)) {
 		if (orig_clock_ctrl & CLOCK_CTRL_625_CORE) {
 			tw32_wait_f(TG3PCI_CLOCK_CTRL,
 				    clock_ctrl | CLOCK_CTRL_625_CORE, 40);
@@ -880,6 +901,104 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
 	return ret;
 }
 
+static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
+{
+	int err;
+
+	err = tg3_writephy(tp, MII_TG3_MMD_CTRL, devad);
+	if (err)
+		goto done;
+
+	err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, addr);
+	if (err)
+		goto done;
+
+	err = tg3_writephy(tp, MII_TG3_MMD_CTRL,
+			   MII_TG3_MMD_CTRL_DATA_NOINC | devad);
+	if (err)
+		goto done;
+
+	err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, val);
+
+done:
+	return err;
+}
+
+static int tg3_phy_cl45_read(struct tg3 *tp, u32 devad, u32 addr, u32 *val)
+{
+	int err;
+
+	err = tg3_writephy(tp, MII_TG3_MMD_CTRL, devad);
+	if (err)
+		goto done;
+
+	err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, addr);
+	if (err)
+		goto done;
+
+	err = tg3_writephy(tp, MII_TG3_MMD_CTRL,
+			   MII_TG3_MMD_CTRL_DATA_NOINC | devad);
+	if (err)
+		goto done;
+
+	err = tg3_readphy(tp, MII_TG3_MMD_ADDRESS, val);
+
+done:
+	return err;
+}
+
+static int tg3_phydsp_read(struct tg3 *tp, u32 reg, u32 *val)
+{
+	int err;
+
+	err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
+	if (!err)
+		err = tg3_readphy(tp, MII_TG3_DSP_RW_PORT, val);
+
+	return err;
+}
+
+static int tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
+{
+	int err;
+
+	err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
+	if (!err)
+		err = tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
+
+	return err;
+}
+
+static int tg3_phy_auxctl_read(struct tg3 *tp, int reg, u32 *val)
+{
+	int err;
+
+	err = tg3_writephy(tp, MII_TG3_AUX_CTRL,
+			   (reg << MII_TG3_AUXCTL_MISC_RDSEL_SHIFT) |
+			   MII_TG3_AUXCTL_SHDWSEL_MISC);
+	if (!err)
+		err = tg3_readphy(tp, MII_TG3_AUX_CTRL, val);
+
+	return err;
+}
+
+static int tg3_phy_auxctl_write(struct tg3 *tp, int reg, u32 set)
+{
+	if (reg == MII_TG3_AUXCTL_SHDWSEL_MISC)
+		set |= MII_TG3_AUXCTL_MISC_WREN;
+
+	return tg3_writephy(tp, MII_TG3_AUX_CTRL, set | reg);
+}
+
+#define TG3_PHY_AUXCTL_SMDSP_ENABLE(tp) \
+	tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \
+			     MII_TG3_AUXCTL_ACTL_SMDSP_ENA | \
+			     MII_TG3_AUXCTL_ACTL_TX_6DB)
+
+#define TG3_PHY_AUXCTL_SMDSP_DISABLE(tp) \
+	tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \
+			     MII_TG3_AUXCTL_ACTL_TX_6DB);
+
 static int tg3_bmcr_reset(struct tg3 *tp)
 {
 	u32 phy_control;
@@ -982,7 +1101,7 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 		return;
 	}
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE))
+	if (!tg3_flag(tp, RGMII_INBAND_DISABLE))
 		val |= MAC_PHYCFG2_EMODE_MASK_MASK |
 		       MAC_PHYCFG2_FMODE_MASK_MASK |
 		       MAC_PHYCFG2_GMODE_MASK_MASK |
@@ -995,10 +1114,10 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 	val = tr32(MAC_PHYCFG1);
 	val &= ~(MAC_PHYCFG1_RXCLK_TO_MASK | MAC_PHYCFG1_TXCLK_TO_MASK |
 		 MAC_PHYCFG1_RGMII_EXT_RX_DEC | MAC_PHYCFG1_RGMII_SND_STAT_EN);
-	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)) {
-		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
+	if (!tg3_flag(tp, RGMII_INBAND_DISABLE)) {
+		if (tg3_flag(tp, RGMII_EXT_IBND_RX_EN))
 			val |= MAC_PHYCFG1_RGMII_EXT_RX_DEC;
-		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
+		if (tg3_flag(tp, RGMII_EXT_IBND_TX_EN))
 			val |= MAC_PHYCFG1_RGMII_SND_STAT_EN;
 	}
 	val |= MAC_PHYCFG1_RXCLK_TIMEOUT | MAC_PHYCFG1_TXCLK_TIMEOUT |
@@ -1013,13 +1132,13 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 		 MAC_RGMII_MODE_TX_ENABLE |
 		 MAC_RGMII_MODE_TX_LOWPWR |
 		 MAC_RGMII_MODE_TX_RESET);
-	if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)) {
-		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
+	if (!tg3_flag(tp, RGMII_INBAND_DISABLE)) {
+		if (tg3_flag(tp, RGMII_EXT_IBND_RX_EN))
 			val |= MAC_RGMII_MODE_RX_INT_B |
 			       MAC_RGMII_MODE_RX_QUALITY |
 			       MAC_RGMII_MODE_RX_ACTIVITY |
 			       MAC_RGMII_MODE_RX_ENG_DET;
-		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
+		if (tg3_flag(tp, RGMII_EXT_IBND_TX_EN))
 			val |= MAC_RGMII_MODE_TX_ENABLE |
 			       MAC_RGMII_MODE_TX_LOWPWR |
 			       MAC_RGMII_MODE_TX_RESET;
@@ -1033,7 +1152,7 @@ static void tg3_mdio_start(struct tg3 *tp)
 	tw32_f(MAC_MI_MODE, tp->mi_mode);
 	udelay(80);
 
-	if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
+	if (tg3_flag(tp, MDIOBUS_INITED) &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
 		tg3_mdio_config_5785(tp);
 }
@@ -1044,8 +1163,7 @@ static int tg3_mdio_init(struct tg3 *tp)
 	u32 reg;
 	struct phy_device *phydev;
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+	if (tg3_flag(tp, 5717_PLUS)) {
 		u32 is_serdes;
 
 		tp->phy_addr = PCI_FUNC(tp->pdev->devfn) + 1;
@@ -1062,8 +1180,7 @@ static int tg3_mdio_init(struct tg3 *tp)
 
 	tg3_mdio_start(tp);
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) ||
-	    (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED))
+	if (!tg3_flag(tp, USE_PHYLIB) || tg3_flag(tp, MDIOBUS_INITED))
 		return 0;
 
 	tp->mdio_bus = mdiobus_alloc();
@@ -1119,11 +1236,11 @@ static int tg3_mdio_init(struct tg3 *tp)
 				     PHY_BRCM_RX_REFCLK_UNUSED |
 				     PHY_BRCM_DIS_TXCRXC_NOENRGY |
 				     PHY_BRCM_AUTO_PWRDWN_ENABLE;
-		if (tp->tg3_flags3 & TG3_FLG3_RGMII_INBAND_DISABLE)
+		if (tg3_flag(tp, RGMII_INBAND_DISABLE))
 			phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
-		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
+		if (tg3_flag(tp, RGMII_EXT_IBND_RX_EN))
 			phydev->dev_flags |= PHY_BRCM_EXT_IBND_RX_ENABLE;
-		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
+		if (tg3_flag(tp, RGMII_EXT_IBND_TX_EN))
 			phydev->dev_flags |= PHY_BRCM_EXT_IBND_TX_ENABLE;
 		/* fallthru */
 	case PHY_ID_RTL8211C:
@@ -1137,7 +1254,7 @@ static int tg3_mdio_init(struct tg3 *tp)
 		break;
 	}
 
-	tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED;
+	tg3_flag_set(tp, MDIOBUS_INITED);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
 		tg3_mdio_config_5785(tp);
@@ -1147,59 +1264,13 @@ static int tg3_mdio_init(struct tg3 *tp)
 
 static void tg3_mdio_fini(struct tg3 *tp)
 {
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
-		tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED;
+	if (tg3_flag(tp, MDIOBUS_INITED)) {
+		tg3_flag_clear(tp, MDIOBUS_INITED);
 		mdiobus_unregister(tp->mdio_bus);
 		mdiobus_free(tp->mdio_bus);
 	}
 }
 
-static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
-{
-	int err;
-
-	err = tg3_writephy(tp, MII_TG3_MMD_CTRL, devad);
-	if (err)
-		goto done;
-
-	err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, addr);
-	if (err)
-		goto done;
-
-	err = tg3_writephy(tp, MII_TG3_MMD_CTRL,
-			   MII_TG3_MMD_CTRL_DATA_NOINC | devad);
-	if (err)
-		goto done;
-
-	err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, val);
-
-done:
-	return err;
-}
-
-static int tg3_phy_cl45_read(struct tg3 *tp, u32 devad, u32 addr, u32 *val)
-{
-	int err;
-
-	err = tg3_writephy(tp, MII_TG3_MMD_CTRL, devad);
-	if (err)
-		goto done;
-
-	err = tg3_writephy(tp, MII_TG3_MMD_ADDRESS, addr);
-	if (err)
-		goto done;
-
-	err = tg3_writephy(tp, MII_TG3_MMD_CTRL,
-			   MII_TG3_MMD_CTRL_DATA_NOINC | devad);
-	if (err)
-		goto done;
-
-	err = tg3_readphy(tp, MII_TG3_MMD_ADDRESS, val);
-
-done:
-	return err;
-}
-
 /* tp->lock is held. */
 static inline void tg3_generate_fw_event(struct tg3 *tp)
 {
@@ -1247,8 +1318,7 @@ static void tg3_ump_link_report(struct tg3 *tp)
 	u32 reg;
 	u32 val;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
-	    !(tp->tg3_flags  & TG3_FLAG_ENABLE_ASF))
+	if (!tg3_flag(tp, 5780_CLASS) || !tg3_flag(tp, ENABLE_ASF))
 		return;
 
 	tg3_wait_for_event_ack(tp);
@@ -1308,6 +1378,11 @@ static void tg3_link_report(struct tg3 *tp)
 			    "on" : "off",
 			    (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
 			    "on" : "off");
+
+		if (tp->phy_flags & TG3_PHYFLG_EEE_CAP)
+			netdev_info(tp->dev, "EEE is %s\n",
+				    tp->setlpicnt ? "enabled" : "disabled");
+
 		tg3_ump_link_report(tp);
 	}
 }
@@ -1373,13 +1448,12 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv)
 	u32 old_rx_mode = tp->rx_mode;
 	u32 old_tx_mode = tp->tx_mode;
 
-	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
+	if (tg3_flag(tp, USE_PHYLIB))
 		autoneg = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]->autoneg;
 	else
 		autoneg = tp->link_config.autoneg;
 
-	if (autoneg == AUTONEG_ENABLE &&
-	    (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG)) {
+	if (autoneg == AUTONEG_ENABLE && tg3_flag(tp, PAUSE_AUTONEG)) {
 		if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES)
 			flowctrl = tg3_resolve_flowctrl_1000X(lcladv, rmtadv);
 		else
@@ -1576,28 +1650,6 @@ static void tg3_phy_fini(struct tg3 *tp)
 	}
 }
 
-static int tg3_phydsp_read(struct tg3 *tp, u32 reg, u32 *val)
-{
-	int err;
-
-	err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
-	if (!err)
-		err = tg3_readphy(tp, MII_TG3_DSP_RW_PORT, val);
-
-	return err;
-}
-
-static int tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
-{
-	int err;
-
-	err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
-	if (!err)
-		err = tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
-
-	return err;
-}
-
 static void tg3_phy_fet_toggle_apd(struct tg3 *tp, bool enable)
 {
 	u32 phytest;
@@ -1622,9 +1674,8 @@ static void tg3_phy_toggle_apd(struct tg3 *tp, bool enable)
 {
 	u32 reg;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
-	    ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	      GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) &&
+	if (!tg3_flag(tp, 5705_PLUS) ||
+	    (tg3_flag(tp, 5717_PLUS) &&
 	     (tp->phy_flags & TG3_PHYFLG_MII_SERDES)))
 		return;
 
@@ -1658,7 +1709,7 @@ static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
 {
 	u32 phy;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+	if (!tg3_flag(tp, 5705_PLUS) ||
 	    (tp->phy_flags & TG3_PHYFLG_ANY_SERDES))
 		return;
 
@@ -1680,31 +1731,33 @@ static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
 			tg3_writephy(tp, MII_TG3_FET_TEST, ephy);
 		}
 	} else {
-		phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
-		      MII_TG3_AUXCTL_SHDWSEL_MISC;
-		if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, phy) &&
-		    !tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy)) {
+		int ret;
+
+		ret = tg3_phy_auxctl_read(tp,
+					  MII_TG3_AUXCTL_SHDWSEL_MISC, &phy);
+		if (!ret) {
 			if (enable)
 				phy |= MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
 			else
 				phy &= ~MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
-			phy |= MII_TG3_AUXCTL_MISC_WREN;
-			tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+			tg3_phy_auxctl_write(tp,
+					     MII_TG3_AUXCTL_SHDWSEL_MISC, phy);
 		}
 	}
 }
 
 static void tg3_phy_set_wirespeed(struct tg3 *tp)
 {
+	int ret;
 	u32 val;
 
 	if (tp->phy_flags & TG3_PHYFLG_NO_ETH_WIRE_SPEED)
 		return;
 
-	if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x7007) &&
-	    !tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
-		tg3_writephy(tp, MII_TG3_AUX_CTRL,
-			     (val | (1 << 15) | (1 << 4)));
+	ret = tg3_phy_auxctl_read(tp, MII_TG3_AUXCTL_SHDWSEL_MISC, &val);
+	if (!ret)
+		tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_MISC,
+				     val | MII_TG3_AUXCTL_MISC_WIRESPD_EN);
 }
 
 static void tg3_phy_apply_otp(struct tg3 *tp)
@@ -1716,11 +1769,8 @@ static void tg3_phy_apply_otp(struct tg3 *tp)
 
 	otp = tp->phy_otp;
 
-	/* Enable SM_DSP clock and tx 6dB coding. */
-	phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
-	      MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
-	      MII_TG3_AUXCTL_ACTL_TX_6DB;
-	tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+	if (TG3_PHY_AUXCTL_SMDSP_ENABLE(tp))
+		return;
 
 	phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT);
 	phy |= MII_TG3_DSP_TAP1_AGCTGT_DFLT;
@@ -1744,10 +1794,7 @@ static void tg3_phy_apply_otp(struct tg3 *tp)
 	      ((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT);
 	tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy);
 
-	/* Turn off SM_DSP clock. */
-	phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
-	      MII_TG3_AUXCTL_ACTL_TX_6DB;
-	tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+	TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
 }
 
 static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
@@ -1776,29 +1823,9 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
 		tg3_phy_cl45_read(tp, MDIO_MMD_AN,
 				  TG3_CL45_D7_EEERES_STAT, &val);
 
-		switch (val) {
-		case TG3_CL45_D7_EEERES_STAT_LP_1000T:
-			switch (GET_ASIC_REV(tp->pci_chip_rev_id)) {
-			case ASIC_REV_5717:
-			case ASIC_REV_5719:
-			case ASIC_REV_57765:
-				/* Enable SM_DSP clock and tx 6dB coding. */
-				val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
-				      MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
-				      MII_TG3_AUXCTL_ACTL_TX_6DB;
-				tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
-
-				tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, 0x0000);
-
-				/* Turn off SM_DSP clock. */
-				val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
-				      MII_TG3_AUXCTL_ACTL_TX_6DB;
-				tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
-			}
-			/* Fallthrough */
-		case TG3_CL45_D7_EEERES_STAT_LP_100TX:
+		if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T ||
+		    val == TG3_CL45_D7_EEERES_STAT_LP_100TX)
 			tp->setlpicnt = 2;
-		}
 	}
 
 	if (!tp->setlpicnt) {
@@ -1807,6 +1834,23 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
 	}
 }
 
+static void tg3_phy_eee_enable(struct tg3 *tp)
+{
+	u32 val;
+
+	if (tp->link_config.active_speed == SPEED_1000 &&
+	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) &&
+	    !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) {
+		tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, 0x0003);
+		TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
+	}
+
+	val = tr32(TG3_CPMU_EEE_MODE);
+	tw32(TG3_CPMU_EEE_MODE, val | TG3_CPMU_EEEMD_LPI_ENABLE);
+}
+
 static int tg3_wait_macro_done(struct tg3 *tp)
 {
 	int limit = 100;
@@ -1945,8 +1989,9 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
 			     (MII_TG3_CTRL_AS_MASTER |
 			      MII_TG3_CTRL_ENABLE_AS_MASTER));
 
-		/* Enable SM_DSP_CLOCK and 6dB.  */
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
+		err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp);
+		if (err)
+			return err;
 
 		/* Block the PHY control access.  */
 		tg3_phydsp_write(tp, 0x8005, 0x0800);
@@ -1965,13 +2010,7 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
 	tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200);
 	tg3_writephy(tp, MII_TG3_DSP_CONTROL, 0x0000);
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
-		/* Set Extended packet length bit for jumbo frames */
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4400);
-	} else {
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
-	}
+	TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
 
 	tg3_writephy(tp, MII_TG3_CTRL, phy9_orig);
 
@@ -2047,8 +2086,7 @@ static int tg3_phy_reset(struct tg3 *tp)
 		}
 	}
 
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) &&
+	if (tg3_flag(tp, 5717_PLUS) &&
 	    (tp->phy_flags & TG3_PHYFLG_MII_SERDES))
 		return 0;
 
@@ -2060,49 +2098,57 @@ static int tg3_phy_reset(struct tg3 *tp)
 		tg3_phy_toggle_apd(tp, false);
 
 out:
-	if (tp->phy_flags & TG3_PHYFLG_ADC_BUG) {
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
+	if ((tp->phy_flags & TG3_PHYFLG_ADC_BUG) &&
+	    !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) {
 		tg3_phydsp_write(tp, 0x201f, 0x2aaa);
 		tg3_phydsp_write(tp, 0x000a, 0x0323);
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+		TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
 	}
+
 	if (tp->phy_flags & TG3_PHYFLG_5704_A0_BUG) {
 		tg3_writephy(tp, MII_TG3_MISC_SHDW, 0x8d68);
 		tg3_writephy(tp, MII_TG3_MISC_SHDW, 0x8d68);
 	}
+
 	if (tp->phy_flags & TG3_PHYFLG_BER_BUG) {
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
-		tg3_phydsp_write(tp, 0x000a, 0x310b);
-		tg3_phydsp_write(tp, 0x201f, 0x9506);
-		tg3_phydsp_write(tp, 0x401f, 0x14e2);
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+		if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) {
+			tg3_phydsp_write(tp, 0x000a, 0x310b);
+			tg3_phydsp_write(tp, 0x201f, 0x9506);
+			tg3_phydsp_write(tp, 0x401f, 0x14e2);
+			TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
+		}
 	} else if (tp->phy_flags & TG3_PHYFLG_JITTER_BUG) {
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
-		tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
-		if (tp->phy_flags & TG3_PHYFLG_ADJUST_TRIM) {
-			tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b);
-			tg3_writephy(tp, MII_TG3_TEST1,
-				     MII_TG3_TEST1_TRIM_EN | 0x4);
-		} else
-			tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+		if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) {
+			tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
+			if (tp->phy_flags & TG3_PHYFLG_ADJUST_TRIM) {
+				tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b);
+				tg3_writephy(tp, MII_TG3_TEST1,
+					     MII_TG3_TEST1_TRIM_EN | 0x4);
+			} else
+				tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
+
+			TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
+		}
 	}
+
 	/* Set Extended packet length bit (bit 14) on all chips that */
 	/* support jumbo frames */
 	if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
 		/* Cannot do read-modify-write on 5401 */
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
-	} else if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+		tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, 0x4c20);
+	} else if (tg3_flag(tp, JUMBO_CAPABLE)) {
 		/* Set bit 14 with read-modify-write to preserve other bits */
-		if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0007) &&
-		    !tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
-			tg3_writephy(tp, MII_TG3_AUX_CTRL, val | 0x4000);
+		err = tg3_phy_auxctl_read(tp,
+					  MII_TG3_AUXCTL_SHDWSEL_AUXCTL, &val);
+		if (!err)
+			tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL,
+					   val | MII_TG3_AUXCTL_ACTL_EXTPKTLEN);
 	}
 
 	/* Set phy register 0x10 bit 0 to high fifo elasticity to support
 	 * jumbo frames transmission.
 	 */
-	if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+	if (tg3_flag(tp, JUMBO_CAPABLE)) {
 		if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &val))
 			tg3_writephy(tp, MII_TG3_EXT_CTRL,
 				     val | MII_TG3_EXT_CTRL_FIFO_ELASTIC);
@@ -2123,14 +2169,15 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 	bool need_vaux = false;
 
 	/* The GPIOs do something completely different on 57765. */
-	if ((tp->tg3_flags2 & TG3_FLG2_IS_NIC) == 0 ||
+	if (!tg3_flag(tp, IS_NIC) ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		return;
 
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
 	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 ||
-	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) &&
+	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) &&
 	    tp->pdev_peer != tp->pdev) {
 		struct net_device *dev_peer;
 
@@ -2140,17 +2187,16 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 		if (dev_peer) {
 			struct tg3 *tp_peer = netdev_priv(dev_peer);
 
-			if (tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE)
+			if (tg3_flag(tp_peer, INIT_COMPLETE))
 				return;
 
-			if ((tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) ||
-			    (tp_peer->tg3_flags & TG3_FLAG_ENABLE_ASF))
+			if (tg3_flag(tp_peer, WOL_ENABLE) ||
+			    tg3_flag(tp_peer, ENABLE_ASF))
 				need_vaux = true;
 		}
 	}
 
-	if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) ||
-	    (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+	if (tg3_flag(tp, WOL_ENABLE) || tg3_flag(tp, ENABLE_ASF))
 		need_vaux = true;
 
 	if (need_vaux) {
@@ -2304,11 +2350,10 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power)
 		tg3_writephy(tp, MII_TG3_EXT_CTRL,
 			     MII_TG3_EXT_CTRL_FORCE_LED_OFF);
 
-		tg3_writephy(tp, MII_TG3_AUX_CTRL,
-			     MII_TG3_AUXCTL_SHDWSEL_PWRCTL |
-			     MII_TG3_AUXCTL_PCTL_100TX_LPWR |
-			     MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |
-			     MII_TG3_AUXCTL_PCTL_VREG_11V);
+		val = MII_TG3_AUXCTL_PCTL_100TX_LPWR |
+		      MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |
+		      MII_TG3_AUXCTL_PCTL_VREG_11V;
+		tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_PWRCTL, val);
 	}
 
 	/* The PHY should not be powered down on some chips because
@@ -2334,7 +2379,7 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power)
 /* tp->lock is held. */
 static int tg3_nvram_lock(struct tg3 *tp)
 {
-	if (tp->tg3_flags & TG3_FLAG_NVRAM) {
+	if (tg3_flag(tp, NVRAM)) {
 		int i;
 
 		if (tp->nvram_lock_cnt == 0) {
@@ -2357,7 +2402,7 @@ static int tg3_nvram_lock(struct tg3 *tp)
 /* tp->lock is held. */
 static void tg3_nvram_unlock(struct tg3 *tp)
 {
-	if (tp->tg3_flags & TG3_FLAG_NVRAM) {
+	if (tg3_flag(tp, NVRAM)) {
 		if (tp->nvram_lock_cnt > 0)
 			tp->nvram_lock_cnt--;
 		if (tp->nvram_lock_cnt == 0)
@@ -2368,8 +2413,7 @@ static void tg3_nvram_unlock(struct tg3 *tp)
 /* tp->lock is held. */
 static void tg3_enable_nvram_access(struct tg3 *tp)
 {
-	if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
-	    !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM)) {
+	if (tg3_flag(tp, 5750_PLUS) && !tg3_flag(tp, PROTECTED_NVRAM)) {
 		u32 nvaccess = tr32(NVRAM_ACCESS);
 
 		tw32(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
@@ -2379,8 +2423,7 @@ static void tg3_enable_nvram_access(struct tg3 *tp)
 /* tp->lock is held. */
 static void tg3_disable_nvram_access(struct tg3 *tp)
 {
-	if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
-	    !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM)) {
+	if (tg3_flag(tp, 5750_PLUS) && !tg3_flag(tp, PROTECTED_NVRAM)) {
 		u32 nvaccess = tr32(NVRAM_ACCESS);
 
 		tw32(NVRAM_ACCESS, nvaccess & ~ACCESS_ENABLE);
@@ -2450,10 +2493,10 @@ static int tg3_nvram_exec_cmd(struct tg3 *tp, u32 nvram_cmd)
 
 static u32 tg3_nvram_phys_addr(struct tg3 *tp, u32 addr)
 {
-	if ((tp->tg3_flags & TG3_FLAG_NVRAM) &&
-	    (tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
-	    (tp->tg3_flags2 & TG3_FLG2_FLASH) &&
-	   !(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM_ADDR_TRANS) &&
+	if (tg3_flag(tp, NVRAM) &&
+	    tg3_flag(tp, NVRAM_BUFFERED) &&
+	    tg3_flag(tp, FLASH) &&
+	    !tg3_flag(tp, NO_NVRAM_ADDR_TRANS) &&
 	    (tp->nvram_jedecnum == JEDEC_ATMEL))
 
 		addr = ((addr / tp->nvram_pagesize) <<
@@ -2465,10 +2508,10 @@ static u32 tg3_nvram_phys_addr(struct tg3 *tp, u32 addr)
 
 static u32 tg3_nvram_logical_addr(struct tg3 *tp, u32 addr)
 {
-	if ((tp->tg3_flags & TG3_FLAG_NVRAM) &&
-	    (tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
-	    (tp->tg3_flags2 & TG3_FLG2_FLASH) &&
-	   !(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM_ADDR_TRANS) &&
+	if (tg3_flag(tp, NVRAM) &&
+	    tg3_flag(tp, NVRAM_BUFFERED) &&
+	    tg3_flag(tp, FLASH) &&
+	    !tg3_flag(tp, NO_NVRAM_ADDR_TRANS) &&
 	    (tp->nvram_jedecnum == JEDEC_ATMEL))
 
 		addr = ((addr >> ATMEL_AT45DB0X1B_PAGE_POS) *
@@ -2488,7 +2531,7 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
 {
 	int ret;
 
-	if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
+	if (!tg3_flag(tp, NVRAM))
 		return tg3_nvram_read_using_eeprom(tp, offset, val);
 
 	offset = tg3_nvram_phys_addr(tp, offset);
@@ -2580,7 +2623,7 @@ static int tg3_power_up(struct tg3 *tp)
 	pci_set_power_state(tp->pdev, PCI_D0);
 
 	/* Switch out of Vaux if it is a NIC */
-	if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+	if (tg3_flag(tp, IS_NIC))
 		tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100);
 
 	return 0;
@@ -2594,7 +2637,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 	tg3_enable_register_access(tp);
 
 	/* Restore the CLKREQ setting. */
-	if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG) {
+	if (tg3_flag(tp, CLKREQ_BUG)) {
 		u16 lnkctl;
 
 		pci_read_config_word(tp->pdev,
@@ -2611,9 +2654,9 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 	     misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
 
 	device_should_wake = device_may_wakeup(&tp->pdev->dev) &&
-			     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
+			     tg3_flag(tp, WOL_ENABLE);
 
-	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+	if (tg3_flag(tp, USE_PHYLIB)) {
 		do_low_power = false;
 		if ((tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) &&
 		    !(tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
@@ -2634,9 +2677,8 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 				      ADVERTISED_Autoneg |
 				      ADVERTISED_10baseT_Half;
 
-			if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
-			    device_should_wake) {
-				if (tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB)
+			if (tg3_flag(tp, ENABLE_ASF) || device_should_wake) {
+				if (tg3_flag(tp, WOL_SPEED_100MB))
 					advertising |=
 						ADVERTISED_100baseT_Half |
 						ADVERTISED_100baseT_Full |
@@ -2681,7 +2723,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 
 		val = tr32(GRC_VCPU_EXT_CTRL);
 		tw32(GRC_VCPU_EXT_CTRL, val | GRC_VCPU_EXT_CTRL_DISABLE_WOL);
-	} else if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+	} else if (!tg3_flag(tp, ENABLE_ASF)) {
 		int i;
 		u32 val;
 
@@ -2692,7 +2734,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 			msleep(1);
 		}
 	}
-	if (tp->tg3_flags & TG3_FLAG_WOL_CAP)
+	if (tg3_flag(tp, WOL_CAP))
 		tg3_write_mem(tp, NIC_SRAM_WOL_MBOX, WOL_SIGNATURE |
 						     WOL_DRV_STATE_SHUTDOWN |
 						     WOL_DRV_WOL |
@@ -2702,8 +2744,13 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 		u32 mac_mode;
 
 		if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) {
-			if (do_low_power) {
-				tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a);
+			if (do_low_power &&
+			    !(tp->phy_flags & TG3_PHYFLG_IS_FET)) {
+				tg3_phy_auxctl_write(tp,
+					       MII_TG3_AUXCTL_SHDWSEL_PWRCTL,
+					       MII_TG3_AUXCTL_PCTL_WOL_EN |
+					       MII_TG3_AUXCTL_PCTL_100TX_LPWR |
+					       MII_TG3_AUXCTL_PCTL_CL_AB_TXDAC);
 				udelay(40);
 			}
 
@@ -2715,8 +2762,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 			mac_mode |= tp->mac_mode & MAC_MODE_LINK_POLARITY;
 			if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
 			    ASIC_REV_5700) {
-				u32 speed = (tp->tg3_flags &
-					     TG3_FLAG_WOL_SPEED_100MB) ?
+				u32 speed = tg3_flag(tp, WOL_SPEED_100MB) ?
 					     SPEED_100 : SPEED_10;
 				if (tg3_5700_link_polarity(tp, speed))
 					mac_mode |= MAC_MODE_LINK_POLARITY;
@@ -2727,17 +2773,15 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 			mac_mode = MAC_MODE_PORT_MODE_TBI;
 		}
 
-		if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
+		if (!tg3_flag(tp, 5750_PLUS))
 			tw32(MAC_LED_CTRL, tp->led_ctrl);
 
 		mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
-		if (((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
-		    !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) &&
-		    ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
-		     (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)))
+		if ((tg3_flag(tp, 5705_PLUS) && !tg3_flag(tp, 5780_CLASS)) &&
+		    (tg3_flag(tp, ENABLE_ASF) || tg3_flag(tp, ENABLE_APE)))
 			mac_mode |= MAC_MODE_KEEP_FRAME_IN_WOL;
 
-		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		if (tg3_flag(tp, ENABLE_APE))
 			mac_mode |= MAC_MODE_APE_TX_EN |
 				    MAC_MODE_APE_RX_EN |
 				    MAC_MODE_TDE_ENABLE;
@@ -2749,7 +2793,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 		udelay(10);
 	}
 
-	if (!(tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB) &&
+	if (!tg3_flag(tp, WOL_SPEED_100MB) &&
 	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
 	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
 		u32 base_val;
@@ -2760,12 +2804,11 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 
 		tw32_wait_f(TG3PCI_CLOCK_CTRL, base_val | CLOCK_CTRL_ALTCLK |
 			    CLOCK_CTRL_PWRDOWN_PLL133, 40);
-	} else if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
-		   (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) ||
-		   (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)) {
+	} else if (tg3_flag(tp, 5780_CLASS) ||
+		   tg3_flag(tp, CPMU_PRESENT) ||
+		   GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
 		/* do nothing */
-	} else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
-		     (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) {
+	} else if (!(tg3_flag(tp, 5750_PLUS) && tg3_flag(tp, ENABLE_ASF))) {
 		u32 newbits1, newbits2;
 
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -2774,7 +2817,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 				    CLOCK_CTRL_TXCLK_DISABLE |
 				    CLOCK_CTRL_ALTCLK);
 			newbits2 = newbits1 | CLOCK_CTRL_44MHZ_CORE;
-		} else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+		} else if (tg3_flag(tp, 5705_PLUS)) {
 			newbits1 = CLOCK_CTRL_625_CORE;
 			newbits2 = newbits1 | CLOCK_CTRL_ALTCLK;
 		} else {
@@ -2788,7 +2831,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 		tw32_wait_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits2,
 			    40);
 
-		if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+		if (!tg3_flag(tp, 5705_PLUS)) {
 			u32 newbits3;
 
 			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -2805,8 +2848,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 		}
 	}
 
-	if (!(device_should_wake) &&
-	    !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+	if (!(device_should_wake) && !tg3_flag(tp, ENABLE_ASF))
 		tg3_power_down_phy(tp, do_low_power);
 
 	tg3_frob_aux_power(tp);
@@ -2818,7 +2860,7 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 
 		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
 		tw32(0x7d00, val);
-		if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
+		if (!tg3_flag(tp, ENABLE_ASF)) {
 			int err;
 
 			err = tg3_nvram_lock(tp);
@@ -2837,7 +2879,7 @@ static void tg3_power_down(struct tg3 *tp)
 {
 	tg3_power_down_prepare(tp);
 
-	pci_wake_from_d3(tp->pdev, tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
+	pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
 	pci_set_power_state(tp->pdev, PCI_D3hot);
 }
 
@@ -2888,106 +2930,54 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8
 	}
 }
 
-static void tg3_phy_copper_begin(struct tg3 *tp)
+static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl)
 {
-	u32 new_adv;
-	int i;
+	int err = 0;
+	u32 val, new_adv;
 
-	if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
-		/* Entering low power mode.  Disable gigabit and
-		 * 100baseT advertisements.
-		 */
-		tg3_writephy(tp, MII_TG3_CTRL, 0);
+	new_adv = ADVERTISE_CSMA;
+	if (advertise & ADVERTISED_10baseT_Half)
+		new_adv |= ADVERTISE_10HALF;
+	if (advertise & ADVERTISED_10baseT_Full)
+		new_adv |= ADVERTISE_10FULL;
+	if (advertise & ADVERTISED_100baseT_Half)
+		new_adv |= ADVERTISE_100HALF;
+	if (advertise & ADVERTISED_100baseT_Full)
+		new_adv |= ADVERTISE_100FULL;
 
-		new_adv = (ADVERTISE_10HALF | ADVERTISE_10FULL |
-			   ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
-		if (tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB)
-			new_adv |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
+	new_adv |= tg3_advert_flowctrl_1000T(flowctrl);
 
-		tg3_writephy(tp, MII_ADVERTISE, new_adv);
-	} else if (tp->link_config.speed == SPEED_INVALID) {
-		if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
-			tp->link_config.advertising &=
-				~(ADVERTISED_1000baseT_Half |
-				  ADVERTISED_1000baseT_Full);
+	err = tg3_writephy(tp, MII_ADVERTISE, new_adv);
+	if (err)
+		goto done;
 
-		new_adv = ADVERTISE_CSMA;
-		if (tp->link_config.advertising & ADVERTISED_10baseT_Half)
-			new_adv |= ADVERTISE_10HALF;
-		if (tp->link_config.advertising & ADVERTISED_10baseT_Full)
-			new_adv |= ADVERTISE_10FULL;
-		if (tp->link_config.advertising & ADVERTISED_100baseT_Half)
-			new_adv |= ADVERTISE_100HALF;
-		if (tp->link_config.advertising & ADVERTISED_100baseT_Full)
-			new_adv |= ADVERTISE_100FULL;
-
-		new_adv |= tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
-
-		tg3_writephy(tp, MII_ADVERTISE, new_adv);
-
-		if (tp->link_config.advertising &
-		    (ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
-			new_adv = 0;
-			if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
-				new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
-			if (tp->link_config.advertising & ADVERTISED_1000baseT_Full)
-				new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
-			if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY) &&
-			    (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
-			     tp->pci_chip_rev_id == CHIPREV_ID_5701_B0))
-				new_adv |= (MII_TG3_CTRL_AS_MASTER |
-					    MII_TG3_CTRL_ENABLE_AS_MASTER);
-			tg3_writephy(tp, MII_TG3_CTRL, new_adv);
-		} else {
-			tg3_writephy(tp, MII_TG3_CTRL, 0);
-		}
-	} else {
-		new_adv = tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
-		new_adv |= ADVERTISE_CSMA;
+	if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
+		goto done;
 
-		/* Asking for a specific link mode. */
-		if (tp->link_config.speed == SPEED_1000) {
-			tg3_writephy(tp, MII_ADVERTISE, new_adv);
+	new_adv = 0;
+	if (advertise & ADVERTISED_1000baseT_Half)
+		new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
+	if (advertise & ADVERTISED_1000baseT_Full)
+		new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
 
-			if (tp->link_config.duplex == DUPLEX_FULL)
-				new_adv = MII_TG3_CTRL_ADV_1000_FULL;
-			else
-				new_adv = MII_TG3_CTRL_ADV_1000_HALF;
-			if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
-			    tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
-				new_adv |= (MII_TG3_CTRL_AS_MASTER |
-					    MII_TG3_CTRL_ENABLE_AS_MASTER);
-		} else {
-			if (tp->link_config.speed == SPEED_100) {
-				if (tp->link_config.duplex == DUPLEX_FULL)
-					new_adv |= ADVERTISE_100FULL;
-				else
-					new_adv |= ADVERTISE_100HALF;
-			} else {
-				if (tp->link_config.duplex == DUPLEX_FULL)
-					new_adv |= ADVERTISE_10FULL;
-				else
-					new_adv |= ADVERTISE_10HALF;
-			}
-			tg3_writephy(tp, MII_ADVERTISE, new_adv);
-
-			new_adv = 0;
-		}
+	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
+	    tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
+		new_adv |= (MII_TG3_CTRL_AS_MASTER |
+			    MII_TG3_CTRL_ENABLE_AS_MASTER);
 
-		tg3_writephy(tp, MII_TG3_CTRL, new_adv);
-	}
+	err = tg3_writephy(tp, MII_TG3_CTRL, new_adv);
+	if (err)
+		goto done;
 
-	if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
-		u32 val;
+	if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
+		goto done;
 
-		tw32(TG3_CPMU_EEE_MODE,
-		     tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
+	tw32(TG3_CPMU_EEE_MODE,
+	     tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
 
-		/* Enable SM_DSP clock and tx 6dB coding. */
-		val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
-		      MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
-		      MII_TG3_AUXCTL_ACTL_TX_6DB;
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
+	err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp);
+	if (!err) {
+		u32 err2;
 
 		switch (GET_ASIC_REV(tp->pci_chip_rev_id)) {
 		case ASIC_REV_5717:
@@ -3004,22 +2994,66 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
 		}
 
 		val = 0;
-		if (tp->link_config.autoneg == AUTONEG_ENABLE) {
-			/* Advertise 100-BaseTX EEE ability */
-			if (tp->link_config.advertising &
-			    ADVERTISED_100baseT_Full)
-				val |= MDIO_AN_EEE_ADV_100TX;
-			/* Advertise 1000-BaseT EEE ability */
-			if (tp->link_config.advertising &
-			    ADVERTISED_1000baseT_Full)
-				val |= MDIO_AN_EEE_ADV_1000T;
+		/* Advertise 100-BaseTX EEE ability */
+		if (advertise & ADVERTISED_100baseT_Full)
+			val |= MDIO_AN_EEE_ADV_100TX;
+		/* Advertise 1000-BaseT EEE ability */
+		if (advertise & ADVERTISED_1000baseT_Full)
+			val |= MDIO_AN_EEE_ADV_1000T;
+		err = tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
+
+		err2 = TG3_PHY_AUXCTL_SMDSP_DISABLE(tp);
+		if (!err)
+			err = err2;
+	}
+
+done:
+	return err;
+}
+
+static void tg3_phy_copper_begin(struct tg3 *tp)
+{
+	u32 new_adv;
+	int i;
+
+	if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
+		new_adv = ADVERTISED_10baseT_Half |
+			  ADVERTISED_10baseT_Full;
+		if (tg3_flag(tp, WOL_SPEED_100MB))
+			new_adv |= ADVERTISED_100baseT_Half |
+				   ADVERTISED_100baseT_Full;
+
+		tg3_phy_autoneg_cfg(tp, new_adv,
+				    FLOW_CTRL_TX | FLOW_CTRL_RX);
+	} else if (tp->link_config.speed == SPEED_INVALID) {
+		if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
+			tp->link_config.advertising &=
+				~(ADVERTISED_1000baseT_Half |
+				  ADVERTISED_1000baseT_Full);
+
+		tg3_phy_autoneg_cfg(tp, tp->link_config.advertising,
+				    tp->link_config.flowctrl);
+	} else {
+		/* Asking for a specific link mode. */
+		if (tp->link_config.speed == SPEED_1000) {
+			if (tp->link_config.duplex == DUPLEX_FULL)
+				new_adv = ADVERTISED_1000baseT_Full;
+			else
+				new_adv = ADVERTISED_1000baseT_Half;
+		} else if (tp->link_config.speed == SPEED_100) {
+			if (tp->link_config.duplex == DUPLEX_FULL)
+				new_adv = ADVERTISED_100baseT_Full;
+			else
+				new_adv = ADVERTISED_100baseT_Half;
+		} else {
+			if (tp->link_config.duplex == DUPLEX_FULL)
+				new_adv = ADVERTISED_10baseT_Full;
+			else
+				new_adv = ADVERTISED_10baseT_Half;
 		}
-		tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
 
-		/* Turn off SM_DSP clock. */
-		val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
-		      MII_TG3_AUXCTL_ACTL_TX_6DB;
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
+		tg3_phy_autoneg_cfg(tp, new_adv,
+				    tp->link_config.flowctrl);
 	}
 
 	if (tp->link_config.autoneg == AUTONEG_DISABLE &&
@@ -3077,7 +3111,7 @@ static int tg3_init_5401phy_dsp(struct tg3 *tp)
 
 	/* Turn off tap power management. */
 	/* Set Extended packet length bit */
-	err  = tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
+	err = tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, 0x4c20);
 
 	err |= tg3_phydsp_write(tp, 0x0012, 0x1804);
 	err |= tg3_phydsp_write(tp, 0x0013, 0x1204);
@@ -3140,7 +3174,7 @@ static int tg3_adv_1000T_flowctrl_ok(struct tg3 *tp, u32 *lcladv, u32 *rmtadv)
 		if (curadv != reqadv)
 			return 0;
 
-		if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG)
+		if (tg3_flag(tp, PAUSE_AUTONEG))
 			tg3_readphy(tp, MII_LPA, rmtadv);
 	} else {
 		/* Reprogram the advertisement register, even if it
@@ -3183,7 +3217,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 		udelay(80);
 	}
 
-	tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x02);
+	tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_PWRCTL, 0);
 
 	/* Some third-party PHYs need to be reset on link going
 	 * down.
@@ -3203,7 +3237,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 	if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
 		tg3_readphy(tp, MII_BMSR, &bmsr);
 		if (tg3_readphy(tp, MII_BMSR, &bmsr) ||
-		    !(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE))
+		    !tg3_flag(tp, INIT_COMPLETE))
 			bmsr = 0;
 
 		if (!(bmsr & BMSR_LSTATUS)) {
@@ -3264,11 +3298,13 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 	current_duplex = DUPLEX_INVALID;
 
 	if (tp->phy_flags & TG3_PHYFLG_CAPACITIVE_COUPLING) {
-		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4007);
-		tg3_readphy(tp, MII_TG3_AUX_CTRL, &val);
-		if (!(val & (1 << 10))) {
-			val |= (1 << 10);
-			tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
+		err = tg3_phy_auxctl_read(tp,
+					  MII_TG3_AUXCTL_SHDWSEL_MISCTEST,
+					  &val);
+		if (!err && !(val & (1 << 10))) {
+			tg3_phy_auxctl_write(tp,
+					     MII_TG3_AUXCTL_SHDWSEL_MISCTEST,
+					     val | (1 << 10));
 			goto relink;
 		}
 	}
@@ -3341,8 +3377,8 @@ relink:
 		tg3_phy_copper_begin(tp);
 
 		tg3_readphy(tp, MII_BMSR, &bmsr);
-		if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
-		    (bmsr & BMSR_LSTATUS))
+		if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
+		    (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
 			current_link_up = 1;
 	}
 
@@ -3385,7 +3421,7 @@ relink:
 
 	tg3_phy_eee_adjust(tp, current_link_up);
 
-	if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
+	if (tg3_flag(tp, USE_LINKCHG_REG)) {
 		/* Polled via timer. */
 		tw32_f(MAC_EVENT, 0);
 	} else {
@@ -3396,8 +3432,7 @@ relink:
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 &&
 	    current_link_up == 1 &&
 	    tp->link_config.active_speed == SPEED_1000 &&
-	    ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ||
-	     (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED))) {
+	    (tg3_flag(tp, PCIX_MODE) || tg3_flag(tp, PCI_HIGH_SPEED))) {
 		udelay(120);
 		tw32_f(MAC_STATUS,
 		     (MAC_STATUS_SYNC_CHANGED |
@@ -3409,7 +3444,7 @@ relink:
 	}
 
 	/* Prevent send BD corruption. */
-	if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG) {
+	if (tg3_flag(tp, CLKREQ_BUG)) {
 		u16 oldlnkctl, newlnkctl;
 
 		pci_read_config_word(tp->pdev,
@@ -3804,7 +3839,7 @@ static void tg3_init_bcm8002(struct tg3 *tp)
 	int i;
 
 	/* Reset when initting first time or we have a link. */
-	if ((tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) &&
+	if (tg3_flag(tp, INIT_COMPLETE) &&
 	    !(mac_status & MAC_STATUS_PCS_SYNCED))
 		return;
 
@@ -4065,9 +4100,9 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
 	orig_active_speed = tp->link_config.active_speed;
 	orig_active_duplex = tp->link_config.active_duplex;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_HW_AUTONEG) &&
+	if (!tg3_flag(tp, HW_AUTONEG) &&
 	    netif_carrier_ok(tp->dev) &&
-	    (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE)) {
+	    tg3_flag(tp, INIT_COMPLETE)) {
 		mac_status = tr32(MAC_STATUS);
 		mac_status &= (MAC_STATUS_PCS_SYNCED |
 			       MAC_STATUS_SIGNAL_DET |
@@ -4098,7 +4133,7 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
 	current_link_up = 0;
 	mac_status = tr32(MAC_STATUS);
 
-	if (tp->tg3_flags2 & TG3_FLG2_HW_AUTONEG)
+	if (tg3_flag(tp, HW_AUTONEG))
 		current_link_up = tg3_setup_fiber_hw_autoneg(tp, mac_status);
 	else
 		current_link_up = tg3_setup_fiber_by_hand(tp, mac_status);
@@ -4297,7 +4332,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
 					current_duplex = DUPLEX_FULL;
 				else
 					current_duplex = DUPLEX_HALF;
-			} else if (!(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+			} else if (!tg3_flag(tp, 5780_CLASS)) {
 				/* Link is up via parallel detect */
 			} else {
 				current_link_up = 0;
@@ -4394,6 +4429,7 @@ static void tg3_serdes_parallel_detect(struct tg3 *tp)
 
 static int tg3_setup_phy(struct tg3 *tp, int force_reset)
 {
+	u32 val;
 	int err;
 
 	if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
@@ -4404,7 +4440,7 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
 		err = tg3_setup_copper_phy(tp, force_reset);
 
 	if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
-		u32 val, scale;
+		u32 scale;
 
 		val = tr32(TG3_CPMU_CLCK_STAT) & CPMU_CLCK_STAT_MAC_CLCK_MASK;
 		if (val == CPMU_CLCK_STAT_MAC_CLCK_62_5)
@@ -4419,19 +4455,22 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
 		tw32(GRC_MISC_CFG, val);
 	}
 
+	val = (2 << TX_LENGTHS_IPG_CRS_SHIFT) |
+	      (6 << TX_LENGTHS_IPG_SHIFT);
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+		val |= tr32(MAC_TX_LENGTHS) &
+		       (TX_LENGTHS_JMB_FRM_LEN_MSK |
+			TX_LENGTHS_CNT_DWN_VAL_MSK);
+
 	if (tp->link_config.active_speed == SPEED_1000 &&
 	    tp->link_config.active_duplex == DUPLEX_HALF)
-		tw32(MAC_TX_LENGTHS,
-		     ((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
-		      (6 << TX_LENGTHS_IPG_SHIFT) |
-		      (0xff << TX_LENGTHS_SLOT_TIME_SHIFT)));
+		tw32(MAC_TX_LENGTHS, val |
+		     (0xff << TX_LENGTHS_SLOT_TIME_SHIFT));
 	else
-		tw32(MAC_TX_LENGTHS,
-		     ((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
-		      (6 << TX_LENGTHS_IPG_SHIFT) |
-		      (32 << TX_LENGTHS_SLOT_TIME_SHIFT)));
+		tw32(MAC_TX_LENGTHS, val |
+		     (32 << TX_LENGTHS_SLOT_TIME_SHIFT));
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	if (!tg3_flag(tp, 5705_PLUS)) {
 		if (netif_carrier_ok(tp->dev)) {
 			tw32(HOSTCC_STAT_COAL_TICKS,
 			     tp->coal.stats_block_coalesce_usecs);
@@ -4440,8 +4479,8 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
 		}
 	}
 
-	if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND) {
-		u32 val = tr32(PCIE_PWR_MGMT_THRESH);
+	if (tg3_flag(tp, ASPM_WORKAROUND)) {
+		val = tr32(PCIE_PWR_MGMT_THRESH);
 		if (!netif_carrier_ok(tp->dev))
 			val = (val & ~PCIE_PWR_MGMT_L1_THRESH_MSK) |
 			      tp->pwrmgmt_thresh;
@@ -4458,6 +4497,123 @@ static inline int tg3_irq_sync(struct tg3 *tp)
 	return tp->irq_sync;
 }
 
+static inline void tg3_rd32_loop(struct tg3 *tp, u32 *dst, u32 off, u32 len)
+{
+	int i;
+
+	dst = (u32 *)((u8 *)dst + off);
+	for (i = 0; i < len; i += sizeof(u32))
+		*dst++ = tr32(off + i);
+}
+
+static void tg3_dump_legacy_regs(struct tg3 *tp, u32 *regs)
+{
+	tg3_rd32_loop(tp, regs, TG3PCI_VENDOR, 0xb0);
+	tg3_rd32_loop(tp, regs, MAILBOX_INTERRUPT_0, 0x200);
+	tg3_rd32_loop(tp, regs, MAC_MODE, 0x4f0);
+	tg3_rd32_loop(tp, regs, SNDDATAI_MODE, 0xe0);
+	tg3_rd32_loop(tp, regs, SNDDATAC_MODE, 0x04);
+	tg3_rd32_loop(tp, regs, SNDBDS_MODE, 0x80);
+	tg3_rd32_loop(tp, regs, SNDBDI_MODE, 0x48);
+	tg3_rd32_loop(tp, regs, SNDBDC_MODE, 0x04);
+	tg3_rd32_loop(tp, regs, RCVLPC_MODE, 0x20);
+	tg3_rd32_loop(tp, regs, RCVLPC_SELLST_BASE, 0x15c);
+	tg3_rd32_loop(tp, regs, RCVDBDI_MODE, 0x0c);
+	tg3_rd32_loop(tp, regs, RCVDBDI_JUMBO_BD, 0x3c);
+	tg3_rd32_loop(tp, regs, RCVDBDI_BD_PROD_IDX_0, 0x44);
+	tg3_rd32_loop(tp, regs, RCVDCC_MODE, 0x04);
+	tg3_rd32_loop(tp, regs, RCVBDI_MODE, 0x20);
+	tg3_rd32_loop(tp, regs, RCVCC_MODE, 0x14);
+	tg3_rd32_loop(tp, regs, RCVLSC_MODE, 0x08);
+	tg3_rd32_loop(tp, regs, MBFREE_MODE, 0x08);
+	tg3_rd32_loop(tp, regs, HOSTCC_MODE, 0x100);
+
+	if (tg3_flag(tp, SUPPORT_MSIX))
+		tg3_rd32_loop(tp, regs, HOSTCC_RXCOL_TICKS_VEC1, 0x180);
+
+	tg3_rd32_loop(tp, regs, MEMARB_MODE, 0x10);
+	tg3_rd32_loop(tp, regs, BUFMGR_MODE, 0x58);
+	tg3_rd32_loop(tp, regs, RDMAC_MODE, 0x08);
+	tg3_rd32_loop(tp, regs, WDMAC_MODE, 0x08);
+	tg3_rd32_loop(tp, regs, RX_CPU_MODE, 0x04);
+	tg3_rd32_loop(tp, regs, RX_CPU_STATE, 0x04);
+	tg3_rd32_loop(tp, regs, RX_CPU_PGMCTR, 0x04);
+	tg3_rd32_loop(tp, regs, RX_CPU_HWBKPT, 0x04);
+
+	if (!tg3_flag(tp, 5705_PLUS)) {
+		tg3_rd32_loop(tp, regs, TX_CPU_MODE, 0x04);
+		tg3_rd32_loop(tp, regs, TX_CPU_STATE, 0x04);
+		tg3_rd32_loop(tp, regs, TX_CPU_PGMCTR, 0x04);
+	}
+
+	tg3_rd32_loop(tp, regs, GRCMBOX_INTERRUPT_0, 0x110);
+	tg3_rd32_loop(tp, regs, FTQ_RESET, 0x120);
+	tg3_rd32_loop(tp, regs, MSGINT_MODE, 0x0c);
+	tg3_rd32_loop(tp, regs, DMAC_MODE, 0x04);
+	tg3_rd32_loop(tp, regs, GRC_MODE, 0x4c);
+
+	if (tg3_flag(tp, NVRAM))
+		tg3_rd32_loop(tp, regs, NVRAM_CMD, 0x24);
+}
+
+static void tg3_dump_state(struct tg3 *tp)
+{
+	int i;
+	u32 *regs;
+
+	regs = kzalloc(TG3_REG_BLK_SIZE, GFP_ATOMIC);
+	if (!regs) {
+		netdev_err(tp->dev, "Failed allocating register dump buffer\n");
+		return;
+	}
+
+	if (tg3_flag(tp, PCI_EXPRESS)) {
+		/* Read up to but not including private PCI registers */
+		for (i = 0; i < TG3_PCIE_TLDLPL_PORT; i += sizeof(u32))
+			regs[i / sizeof(u32)] = tr32(i);
+	} else
+		tg3_dump_legacy_regs(tp, regs);
+
+	for (i = 0; i < TG3_REG_BLK_SIZE / sizeof(u32); i += 4) {
+		if (!regs[i + 0] && !regs[i + 1] &&
+		    !regs[i + 2] && !regs[i + 3])
+			continue;
+
+		netdev_err(tp->dev, "0x%08x: 0x%08x, 0x%08x, 0x%08x, 0x%08x\n",
+			   i * 4,
+			   regs[i + 0], regs[i + 1], regs[i + 2], regs[i + 3]);
+	}
+
+	kfree(regs);
+
+	for (i = 0; i < tp->irq_cnt; i++) {
+		struct tg3_napi *tnapi = &tp->napi[i];
+
+		/* SW status block */
+		netdev_err(tp->dev,
+			 "%d: Host status block [%08x:%08x:(%04x:%04x:%04x):(%04x:%04x)]\n",
+			   i,
+			   tnapi->hw_status->status,
+			   tnapi->hw_status->status_tag,
+			   tnapi->hw_status->rx_jumbo_consumer,
+			   tnapi->hw_status->rx_consumer,
+			   tnapi->hw_status->rx_mini_consumer,
+			   tnapi->hw_status->idx[0].rx_producer,
+			   tnapi->hw_status->idx[0].tx_consumer);
+
+		netdev_err(tp->dev,
+		"%d: NAPI info [%08x:%08x:(%04x:%04x:%04x):%04x:(%04x:%04x:%04x:%04x)]\n",
+			   i,
+			   tnapi->last_tag, tnapi->last_irq_tag,
+			   tnapi->tx_prod, tnapi->tx_cons, tnapi->tx_pending,
+			   tnapi->rx_rcb_ptr,
+			   tnapi->prodring.rx_std_prod_idx,
+			   tnapi->prodring.rx_std_cons_idx,
+			   tnapi->prodring.rx_jmb_prod_idx,
+			   tnapi->prodring.rx_jmb_cons_idx);
+	}
+}
+
 /* This is called whenever we suspect that the system chipset is re-
  * ordering the sequence of MMIO to the tx send mailbox. The symptom
  * is bogus tx completions. We try to recover by setting the
@@ -4466,7 +4622,7 @@ static inline int tg3_irq_sync(struct tg3 *tp)
  */
 static void tg3_tx_recover(struct tg3 *tp)
 {
-	BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
+	BUG_ON(tg3_flag(tp, MBOX_WRITE_REORDER) ||
 	       tp->write32_tx_mbox == tg3_write_indirect_mbox);
 
 	netdev_warn(tp->dev,
@@ -4476,7 +4632,7 @@ static void tg3_tx_recover(struct tg3 *tp)
 		    "and include system chipset information.\n");
 
 	spin_lock(&tp->lock);
-	tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
+	tg3_flag_set(tp, TX_RECOVERY_PENDING);
 	spin_unlock(&tp->lock);
 }
 
@@ -4500,7 +4656,7 @@ static void tg3_tx(struct tg3_napi *tnapi)
 	struct netdev_queue *txq;
 	int index = tnapi - tp->napi;
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+	if (tg3_flag(tp, ENABLE_TSS))
 		index--;
 
 	txq = netdev_get_tx_queue(tp->dev, index);
@@ -4815,7 +4971,7 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 			skb = copy_skb;
 		}
 
-		if ((tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) &&
+		if ((tp->dev->features & NETIF_F_RXCSUM) &&
 		    (desc->type_flags & RXD_FLAG_TCPUDP_CSUM) &&
 		    (((desc->ip_tcp_csum & RXD_TCPCSUM_MASK)
 		      >> RXD_TCPCSUM_SHIFT) == 0xffff))
@@ -4868,7 +5024,7 @@ next_pkt_nopost:
 	tw32_rx_mbox(tnapi->consmbox, sw_idx);
 
 	/* Refill RX ring(s). */
-	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)) {
+	if (!tg3_flag(tp, ENABLE_RSS)) {
 		if (work_mask & RXD_OPAQUE_RING_STD) {
 			tpr->rx_std_prod_idx = std_prod_idx &
 					       tp->rx_std_ring_mask;
@@ -4901,16 +5057,14 @@ next_pkt_nopost:
 static void tg3_poll_link(struct tg3 *tp)
 {
 	/* handle link change and other phy events */
-	if (!(tp->tg3_flags &
-	      (TG3_FLAG_USE_LINKCHG_REG |
-	       TG3_FLAG_POLL_SERDES))) {
+	if (!(tg3_flag(tp, USE_LINKCHG_REG) || tg3_flag(tp, POLL_SERDES))) {
 		struct tg3_hw_status *sblk = tp->napi[0].hw_status;
 
 		if (sblk->status & SD_STATUS_LINK_CHG) {
 			sblk->status = SD_STATUS_UPDATED |
 				       (sblk->status & ~SD_STATUS_LINK_CHG);
 			spin_lock(&tp->lock);
-			if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+			if (tg3_flag(tp, USE_PHYLIB)) {
 				tw32_f(MAC_STATUS,
 				     (MAC_STATUS_SYNC_CHANGED |
 				      MAC_STATUS_CFG_CHANGED |
@@ -5057,7 +5211,7 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
 	/* run TX completion thread */
 	if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
 		tg3_tx(tnapi);
-		if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
+		if (unlikely(tg3_flag(tp, TX_RECOVERY_PENDING)))
 			return work_done;
 	}
 
@@ -5068,7 +5222,7 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
 	if (*(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr)
 		work_done += tg3_rx(tnapi, budget - work_done);
 
-	if ((tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) && tnapi == &tp->napi[1]) {
+	if (tg3_flag(tp, ENABLE_RSS) && tnapi == &tp->napi[1]) {
 		struct tg3_rx_prodring_set *dpr = &tp->napi[0].prodring;
 		int i, err = 0;
 		u32 std_prod_idx = dpr->rx_std_prod_idx;
@@ -5107,7 +5261,7 @@ static int tg3_poll_msix(struct napi_struct *napi, int budget)
 	while (1) {
 		work_done = tg3_poll_work(tnapi, work_done, budget);
 
-		if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
+		if (unlikely(tg3_flag(tp, TX_RECOVERY_PENDING)))
 			goto tx_recovery;
 
 		if (unlikely(work_done >= budget))
@@ -5141,6 +5295,40 @@ tx_recovery:
 	return work_done;
 }
 
+static void tg3_process_error(struct tg3 *tp)
+{
+	u32 val;
+	bool real_error = false;
+
+	if (tg3_flag(tp, ERROR_PROCESSED))
+		return;
+
+	/* Check Flow Attention register */
+	val = tr32(HOSTCC_FLOW_ATTN);
+	if (val & ~HOSTCC_FLOW_ATTN_MBUF_LWM) {
+		netdev_err(tp->dev, "FLOW Attention error.  Resetting chip.\n");
+		real_error = true;
+	}
+
+	if (tr32(MSGINT_STATUS) & ~MSGINT_STATUS_MSI_REQ) {
+		netdev_err(tp->dev, "MSI Status error.  Resetting chip.\n");
+		real_error = true;
+	}
+
+	if (tr32(RDMAC_STATUS) || tr32(WDMAC_STATUS)) {
+		netdev_err(tp->dev, "DMA Status error.  Resetting chip.\n");
+		real_error = true;
+	}
+
+	if (!real_error)
+		return;
+
+	tg3_dump_state(tp);
+
+	tg3_flag_set(tp, ERROR_PROCESSED);
+	schedule_work(&tp->reset_task);
+}
+
 static int tg3_poll(struct napi_struct *napi, int budget)
 {
 	struct tg3_napi *tnapi = container_of(napi, struct tg3_napi, napi);
@@ -5149,17 +5337,20 @@ static int tg3_poll(struct napi_struct *napi, int budget)
 	struct tg3_hw_status *sblk = tnapi->hw_status;
 
 	while (1) {
+		if (sblk->status & SD_STATUS_ERROR)
+			tg3_process_error(tp);
+
 		tg3_poll_link(tp);
 
 		work_done = tg3_poll_work(tnapi, work_done, budget);
 
-		if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
+		if (unlikely(tg3_flag(tp, TX_RECOVERY_PENDING)))
 			goto tx_recovery;
 
 		if (unlikely(work_done >= budget))
 			break;
 
-		if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
+		if (tg3_flag(tp, TAGGED_STATUS)) {
 			/* tp->last_tag is used in tg3_int_reenable() below
 			 * to tell the hw how much work has been processed,
 			 * so we must read it before checking for more work.
@@ -5326,7 +5517,7 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id)
 	 * interrupt is ours and will flush the status block.
 	 */
 	if (unlikely(!(sblk->status & SD_STATUS_UPDATED))) {
-		if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
+		if (tg3_flag(tp, CHIP_RESETTING) ||
 		    (tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
 			handled = 0;
 			goto out;
@@ -5375,7 +5566,7 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
 	 * interrupt is ours and will flush the status block.
 	 */
 	if (unlikely(sblk->status_tag == tnapi->last_irq_tag)) {
-		if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
+		if (tg3_flag(tp, CHIP_RESETTING) ||
 		    (tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
 			handled = 0;
 			goto out;
@@ -5488,14 +5679,14 @@ static void tg3_reset_task(struct work_struct *work)
 
 	tg3_full_lock(tp, 1);
 
-	restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER;
-	tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
+	restart_timer = tg3_flag(tp, RESTART_TIMER);
+	tg3_flag_clear(tp, RESTART_TIMER);
 
-	if (tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING) {
+	if (tg3_flag(tp, TX_RECOVERY_PENDING)) {
 		tp->write32_tx_mbox = tg3_write32_tx_mbox;
 		tp->write32_rx_mbox = tg3_write_flush_reg32;
-		tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
-		tp->tg3_flags &= ~TG3_FLAG_TX_RECOVERY_PENDING;
+		tg3_flag_set(tp, MBOX_WRITE_REORDER);
+		tg3_flag_clear(tp, TX_RECOVERY_PENDING);
 	}
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
@@ -5515,21 +5706,13 @@ out:
 		tg3_phy_start(tp);
 }
 
-static void tg3_dump_short_state(struct tg3 *tp)
-{
-	netdev_err(tp->dev, "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
-		   tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
-	netdev_err(tp->dev, "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
-		   tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
-}
-
 static void tg3_tx_timeout(struct net_device *dev)
 {
 	struct tg3 *tp = netdev_priv(dev);
 
 	if (netif_msg_tx_err(tp)) {
 		netdev_err(dev, "transmit timed out, resetting\n");
-		tg3_dump_short_state(tp);
+		tg3_dump_state(tp);
 	}
 
 	schedule_work(&tp->reset_task);
@@ -5548,7 +5731,7 @@ static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
 					  int len)
 {
 #if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64)
-	if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG)
+	if (tg3_flag(tp, 40BIT_DMA_BUG))
 		return ((u64) mapping + len) > DMA_BIT_MASK(40);
 	return 0;
 #else
@@ -5556,18 +5739,62 @@ static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
 #endif
 }
 
-static void tg3_set_txd(struct tg3_napi *, int, dma_addr_t, int, u32, u32);
+static void tg3_set_txd(struct tg3_napi *tnapi, int entry,
+			dma_addr_t mapping, int len, u32 flags,
+			u32 mss_and_is_end)
+{
+	struct tg3_tx_buffer_desc *txd = &tnapi->tx_ring[entry];
+	int is_end = (mss_and_is_end & 0x1);
+	u32 mss = (mss_and_is_end >> 1);
+	u32 vlan_tag = 0;
+
+	if (is_end)
+		flags |= TXD_FLAG_END;
+	if (flags & TXD_FLAG_VLAN) {
+		vlan_tag = flags >> 16;
+		flags &= 0xffff;
+	}
+	vlan_tag |= (mss << TXD_MSS_SHIFT);
+
+	txd->addr_hi = ((u64) mapping >> 32);
+	txd->addr_lo = ((u64) mapping & 0xffffffff);
+	txd->len_flags = (len << TXD_LEN_SHIFT) | flags;
+	txd->vlan_tag = vlan_tag << TXD_VLAN_TAG_SHIFT;
+}
+
+static void tg3_skb_error_unmap(struct tg3_napi *tnapi,
+				struct sk_buff *skb, int last)
+{
+	int i;
+	u32 entry = tnapi->tx_prod;
+	struct ring_info *txb = &tnapi->tx_buffers[entry];
+
+	pci_unmap_single(tnapi->tp->pdev,
+			 dma_unmap_addr(txb, mapping),
+			 skb_headlen(skb),
+			 PCI_DMA_TODEVICE);
+	for (i = 0; i <= last; i++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+		entry = NEXT_TX(entry);
+		txb = &tnapi->tx_buffers[entry];
+
+		pci_unmap_page(tnapi->tp->pdev,
+			       dma_unmap_addr(txb, mapping),
+			       frag->size, PCI_DMA_TODEVICE);
+	}
+}
 
 /* Workaround 4GB and 40-bit hardware DMA bugs. */
 static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
-				       struct sk_buff *skb, u32 last_plus_one,
-				       u32 *start, u32 base_flags, u32 mss)
+				       struct sk_buff *skb,
+				       u32 base_flags, u32 mss)
 {
 	struct tg3 *tp = tnapi->tp;
 	struct sk_buff *new_skb;
 	dma_addr_t new_addr = 0;
-	u32 entry = *start;
-	int i, ret = 0;
+	u32 entry = tnapi->tx_prod;
+	int ret = 0;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701)
 		new_skb = skb_copy(skb, GFP_ATOMIC);
@@ -5583,55 +5810,30 @@ static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
 		ret = -1;
 	} else {
 		/* New SKB is guaranteed to be linear. */
-		entry = *start;
 		new_addr = pci_map_single(tp->pdev, new_skb->data, new_skb->len,
 					  PCI_DMA_TODEVICE);
 		/* Make sure the mapping succeeded */
 		if (pci_dma_mapping_error(tp->pdev, new_addr)) {
 			ret = -1;
 			dev_kfree_skb(new_skb);
-			new_skb = NULL;
 
 		/* Make sure new skb does not cross any 4G boundaries.
 		 * Drop the packet if it does.
 		 */
-		} else if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
-			    tg3_4g_overflow_test(new_addr, new_skb->len)) {
+		} else if (tg3_flag(tp, 4G_DMA_BNDRY_BUG) &&
+			   tg3_4g_overflow_test(new_addr, new_skb->len)) {
 			pci_unmap_single(tp->pdev, new_addr, new_skb->len,
 					 PCI_DMA_TODEVICE);
 			ret = -1;
 			dev_kfree_skb(new_skb);
-			new_skb = NULL;
 		} else {
+			tnapi->tx_buffers[entry].skb = new_skb;
+			dma_unmap_addr_set(&tnapi->tx_buffers[entry],
+					   mapping, new_addr);
+
 			tg3_set_txd(tnapi, entry, new_addr, new_skb->len,
 				    base_flags, 1 | (mss << 1));
-			*start = NEXT_TX(entry);
-		}
-	}
-
-	/* Now clean up the sw ring entries. */
-	i = 0;
-	while (entry != last_plus_one) {
-		int len;
-
-		if (i == 0)
-			len = skb_headlen(skb);
-		else
-			len = skb_shinfo(skb)->frags[i-1].size;
-
-		pci_unmap_single(tp->pdev,
-				 dma_unmap_addr(&tnapi->tx_buffers[entry],
-						mapping),
-				 len, PCI_DMA_TODEVICE);
-		if (i == 0) {
-			tnapi->tx_buffers[entry].skb = new_skb;
-			dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping,
-					   new_addr);
-		} else {
-			tnapi->tx_buffers[entry].skb = NULL;
 		}
-		entry = NEXT_TX(entry);
-		i++;
 	}
 
 	dev_kfree_skb(skb);
@@ -5639,202 +5841,7 @@ static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
 	return ret;
 }
 
-static void tg3_set_txd(struct tg3_napi *tnapi, int entry,
-			dma_addr_t mapping, int len, u32 flags,
-			u32 mss_and_is_end)
-{
-	struct tg3_tx_buffer_desc *txd = &tnapi->tx_ring[entry];
-	int is_end = (mss_and_is_end & 0x1);
-	u32 mss = (mss_and_is_end >> 1);
-	u32 vlan_tag = 0;
-
-	if (is_end)
-		flags |= TXD_FLAG_END;
-	if (flags & TXD_FLAG_VLAN) {
-		vlan_tag = flags >> 16;
-		flags &= 0xffff;
-	}
-	vlan_tag |= (mss << TXD_MSS_SHIFT);
-
-	txd->addr_hi = ((u64) mapping >> 32);
-	txd->addr_lo = ((u64) mapping & 0xffffffff);
-	txd->len_flags = (len << TXD_LEN_SHIFT) | flags;
-	txd->vlan_tag = vlan_tag << TXD_VLAN_TAG_SHIFT;
-}
-
-/* hard_start_xmit for devices that don't have any bugs and
- * support TG3_FLG2_HW_TSO_2 and TG3_FLG2_HW_TSO_3 only.
- */
-static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
-				  struct net_device *dev)
-{
-	struct tg3 *tp = netdev_priv(dev);
-	u32 len, entry, base_flags, mss;
-	dma_addr_t mapping;
-	struct tg3_napi *tnapi;
-	struct netdev_queue *txq;
-	unsigned int i, last;
-
-	txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
-	tnapi = &tp->napi[skb_get_queue_mapping(skb)];
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
-		tnapi++;
-
-	/* We are running in BH disabled context with netif_tx_lock
-	 * and TX reclaim runs via tp->napi.poll inside of a software
-	 * interrupt.  Furthermore, IRQ processing runs lockless so we have
-	 * no IRQ context deadlocks to worry about either.  Rejoice!
-	 */
-	if (unlikely(tg3_tx_avail(tnapi) <= (skb_shinfo(skb)->nr_frags + 1))) {
-		if (!netif_tx_queue_stopped(txq)) {
-			netif_tx_stop_queue(txq);
-
-			/* This is a hard error, log it. */
-			netdev_err(dev,
-				   "BUG! Tx Ring full when queue awake!\n");
-		}
-		return NETDEV_TX_BUSY;
-	}
-
-	entry = tnapi->tx_prod;
-	base_flags = 0;
-	mss = skb_shinfo(skb)->gso_size;
-	if (mss) {
-		int tcp_opt_len, ip_tcp_len;
-		u32 hdrlen;
-
-		if (skb_header_cloned(skb) &&
-		    pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
-			dev_kfree_skb(skb);
-			goto out_unlock;
-		}
-
-		if (skb_is_gso_v6(skb)) {
-			hdrlen = skb_headlen(skb) - ETH_HLEN;
-		} else {
-			struct iphdr *iph = ip_hdr(skb);
-
-			tcp_opt_len = tcp_optlen(skb);
-			ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr);
-
-			iph->check = 0;
-			iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
-			hdrlen = ip_tcp_len + tcp_opt_len;
-		}
-
-		if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) {
-			mss |= (hdrlen & 0xc) << 12;
-			if (hdrlen & 0x10)
-				base_flags |= 0x00000010;
-			base_flags |= (hdrlen & 0x3e0) << 5;
-		} else
-			mss |= hdrlen << 9;
-
-		base_flags |= (TXD_FLAG_CPU_PRE_DMA |
-			       TXD_FLAG_CPU_POST_DMA);
-
-		tcp_hdr(skb)->check = 0;
-
-	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		base_flags |= TXD_FLAG_TCPUDP_CSUM;
-	}
-
-	if (vlan_tx_tag_present(skb))
-		base_flags |= (TXD_FLAG_VLAN |
-			       (vlan_tx_tag_get(skb) << 16));
-
-	len = skb_headlen(skb);
-
-	/* Queue skb data, a.k.a. the main skb fragment. */
-	mapping = pci_map_single(tp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-	if (pci_dma_mapping_error(tp->pdev, mapping)) {
-		dev_kfree_skb(skb);
-		goto out_unlock;
-	}
-
-	tnapi->tx_buffers[entry].skb = skb;
-	dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping, mapping);
-
-	if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
-	    !mss && skb->len > VLAN_ETH_FRAME_LEN)
-		base_flags |= TXD_FLAG_JMB_PKT;
-
-	tg3_set_txd(tnapi, entry, mapping, len, base_flags,
-		    (skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
-
-	entry = NEXT_TX(entry);
-
-	/* Now loop through additional data fragments, and queue them. */
-	if (skb_shinfo(skb)->nr_frags > 0) {
-		last = skb_shinfo(skb)->nr_frags - 1;
-		for (i = 0; i <= last; i++) {
-			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-
-			len = frag->size;
-			mapping = pci_map_page(tp->pdev,
-					       frag->page,
-					       frag->page_offset,
-					       len, PCI_DMA_TODEVICE);
-			if (pci_dma_mapping_error(tp->pdev, mapping))
-				goto dma_error;
-
-			tnapi->tx_buffers[entry].skb = NULL;
-			dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping,
-					   mapping);
-
-			tg3_set_txd(tnapi, entry, mapping, len,
-				    base_flags, (i == last) | (mss << 1));
-
-			entry = NEXT_TX(entry);
-		}
-	}
-
-	/* Packets are ready, update Tx producer idx local and on card. */
-	tw32_tx_mbox(tnapi->prodmbox, entry);
-
-	tnapi->tx_prod = entry;
-	if (unlikely(tg3_tx_avail(tnapi) <= (MAX_SKB_FRAGS + 1))) {
-		netif_tx_stop_queue(txq);
-
-		/* netif_tx_stop_queue() must be done before checking
-		 * checking tx index in tg3_tx_avail() below, because in
-		 * tg3_tx(), we update tx index before checking for
-		 * netif_tx_queue_stopped().
-		 */
-		smp_mb();
-		if (tg3_tx_avail(tnapi) > TG3_TX_WAKEUP_THRESH(tnapi))
-			netif_tx_wake_queue(txq);
-	}
-
-out_unlock:
-	mmiowb();
-
-	return NETDEV_TX_OK;
-
-dma_error:
-	last = i;
-	entry = tnapi->tx_prod;
-	tnapi->tx_buffers[entry].skb = NULL;
-	pci_unmap_single(tp->pdev,
-			 dma_unmap_addr(&tnapi->tx_buffers[entry], mapping),
-			 skb_headlen(skb),
-			 PCI_DMA_TODEVICE);
-	for (i = 0; i <= last; i++) {
-		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-		entry = NEXT_TX(entry);
-
-		pci_unmap_page(tp->pdev,
-			       dma_unmap_addr(&tnapi->tx_buffers[entry],
-					      mapping),
-			       frag->size, PCI_DMA_TODEVICE);
-	}
-
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *,
-					  struct net_device *);
+static netdev_tx_t tg3_start_xmit(struct sk_buff *, struct net_device *);
 
 /* Use GSO to workaround a rare TSO bug that may be triggered when the
  * TSO header is greater than 80 bytes.
@@ -5868,7 +5875,7 @@ static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb)
 		nskb = segs;
 		segs = segs->next;
 		nskb->next = NULL;
-		tg3_start_xmit_dma_bug(nskb, tp->dev);
+		tg3_start_xmit(nskb, tp->dev);
 	} while (segs);
 
 tg3_tso_bug_end:
@@ -5878,22 +5885,21 @@ tg3_tso_bug_end:
 }
 
 /* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and
- * support TG3_FLG2_HW_TSO_1 or firmware TSO only.
+ * support TG3_FLAG_HW_TSO_1 or firmware TSO only.
  */
-static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
-					  struct net_device *dev)
+static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct tg3 *tp = netdev_priv(dev);
 	u32 len, entry, base_flags, mss;
-	int would_hit_hwbug;
+	int i = -1, would_hit_hwbug;
 	dma_addr_t mapping;
 	struct tg3_napi *tnapi;
 	struct netdev_queue *txq;
-	unsigned int i, last;
+	unsigned int last;
 
 	txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
 	tnapi = &tp->napi[skb_get_queue_mapping(skb)];
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+	if (tg3_flag(tp, ENABLE_TSS))
 		tnapi++;
 
 	/* We are running in BH disabled context with netif_tx_lock
@@ -5944,13 +5950,15 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 		}
 
 		if (unlikely((ETH_HLEN + hdr_len) > 80) &&
-			     (tp->tg3_flags2 & TG3_FLG2_TSO_BUG))
+		    tg3_flag(tp, TSO_BUG))
 			return tg3_tso_bug(tp, skb);
 
 		base_flags |= (TXD_FLAG_CPU_PRE_DMA |
 			       TXD_FLAG_CPU_POST_DMA);
 
-		if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
+		if (tg3_flag(tp, HW_TSO_1) ||
+		    tg3_flag(tp, HW_TSO_2) ||
+		    tg3_flag(tp, HW_TSO_3)) {
 			tcp_hdr(skb)->check = 0;
 			base_flags &= ~TXD_FLAG_TCPUDP_CSUM;
 		} else
@@ -5959,14 +5967,14 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 								 IPPROTO_TCP,
 								 0);
 
-		if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) {
+		if (tg3_flag(tp, HW_TSO_3)) {
 			mss |= (hdr_len & 0xc) << 12;
 			if (hdr_len & 0x10)
 				base_flags |= 0x00000010;
 			base_flags |= (hdr_len & 0x3e0) << 5;
-		} else if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)
+		} else if (tg3_flag(tp, HW_TSO_2))
 			mss |= hdr_len << 9;
-		else if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_1) ||
+		else if (tg3_flag(tp, HW_TSO_1) ||
 			 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
 			if (tcp_opt_len || iph->ihl > 5) {
 				int tsflags;
@@ -5988,7 +5996,7 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 		base_flags |= (TXD_FLAG_VLAN |
 			       (vlan_tx_tag_get(skb) << 16));
 
-	if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
+	if (tg3_flag(tp, USE_JUMBO_BDFLAG) &&
 	    !mss && skb->len > VLAN_ETH_FRAME_LEN)
 		base_flags |= TXD_FLAG_JMB_PKT;
 
@@ -6005,18 +6013,18 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 
 	would_hit_hwbug = 0;
 
-	if ((tp->tg3_flags3 & TG3_FLG3_SHORT_DMA_BUG) && len <= 8)
+	if (tg3_flag(tp, SHORT_DMA_BUG) && len <= 8)
 		would_hit_hwbug = 1;
 
-	if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+	if (tg3_flag(tp, 4G_DMA_BNDRY_BUG) &&
 	    tg3_4g_overflow_test(mapping, len))
 		would_hit_hwbug = 1;
 
-	if ((tp->tg3_flags3 & TG3_FLG3_40BIT_DMA_LIMIT_BUG) &&
+	if (tg3_flag(tp, 40BIT_DMA_LIMIT_BUG) &&
 	    tg3_40bit_overflow_test(tp, mapping, len))
 		would_hit_hwbug = 1;
 
-	if (tp->tg3_flags3 & TG3_FLG3_5701_DMA_BUG)
+	if (tg3_flag(tp, 5701_DMA_BUG))
 		would_hit_hwbug = 1;
 
 	tg3_set_txd(tnapi, entry, mapping, len, base_flags,
@@ -6042,19 +6050,21 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 			if (pci_dma_mapping_error(tp->pdev, mapping))
 				goto dma_error;
 
-			if ((tp->tg3_flags3 & TG3_FLG3_SHORT_DMA_BUG) &&
+			if (tg3_flag(tp, SHORT_DMA_BUG) &&
 			    len <= 8)
 				would_hit_hwbug = 1;
 
-			if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+			if (tg3_flag(tp, 4G_DMA_BNDRY_BUG) &&
 			    tg3_4g_overflow_test(mapping, len))
 				would_hit_hwbug = 1;
 
-			if ((tp->tg3_flags3 & TG3_FLG3_40BIT_DMA_LIMIT_BUG) &&
+			if (tg3_flag(tp, 40BIT_DMA_LIMIT_BUG) &&
 			    tg3_40bit_overflow_test(tp, mapping, len))
 				would_hit_hwbug = 1;
 
-			if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+			if (tg3_flag(tp, HW_TSO_1) ||
+			    tg3_flag(tp, HW_TSO_2) ||
+			    tg3_flag(tp, HW_TSO_3))
 				tg3_set_txd(tnapi, entry, mapping, len,
 					    base_flags, (i == last)|(mss << 1));
 			else
@@ -6066,20 +6076,15 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 	}
 
 	if (would_hit_hwbug) {
-		u32 last_plus_one = entry;
-		u32 start;
-
-		start = entry - 1 - skb_shinfo(skb)->nr_frags;
-		start &= (TG3_TX_RING_SIZE - 1);
+		tg3_skb_error_unmap(tnapi, skb, i);
 
 		/* If the workaround fails due to memory/mapping
 		 * failure, silently drop this packet.
 		 */
-		if (tigon3_dma_hwbug_workaround(tnapi, skb, last_plus_one,
-						&start, base_flags, mss))
+		if (tigon3_dma_hwbug_workaround(tnapi, skb, base_flags, mss))
 			goto out_unlock;
 
-		entry = start;
+		entry = NEXT_TX(tnapi->tx_prod);
 	}
 
 	/* Packets are ready, update Tx producer idx local and on card. */
@@ -6105,25 +6110,66 @@ out_unlock:
 	return NETDEV_TX_OK;
 
 dma_error:
-	last = i;
-	entry = tnapi->tx_prod;
-	tnapi->tx_buffers[entry].skb = NULL;
-	pci_unmap_single(tp->pdev,
-			 dma_unmap_addr(&tnapi->tx_buffers[entry], mapping),
-			 skb_headlen(skb),
-			 PCI_DMA_TODEVICE);
-	for (i = 0; i <= last; i++) {
-		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-		entry = NEXT_TX(entry);
+	tg3_skb_error_unmap(tnapi, skb, i);
+	dev_kfree_skb(skb);
+	tnapi->tx_buffers[tnapi->tx_prod].skb = NULL;
+	return NETDEV_TX_OK;
+}
 
-		pci_unmap_page(tp->pdev,
-			       dma_unmap_addr(&tnapi->tx_buffers[entry],
-					      mapping),
-			       frag->size, PCI_DMA_TODEVICE);
+static void tg3_set_loopback(struct net_device *dev, u32 features)
+{
+	struct tg3 *tp = netdev_priv(dev);
+
+	if (features & NETIF_F_LOOPBACK) {
+		if (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK)
+			return;
+
+		/*
+		 * Clear MAC_MODE_HALF_DUPLEX or you won't get packets back in
+		 * loopback mode if Half-Duplex mode was negotiated earlier.
+		 */
+		tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
+
+		/* Enable internal MAC loopback mode */
+		tp->mac_mode |= MAC_MODE_PORT_INT_LPBACK;
+		spin_lock_bh(&tp->lock);
+		tw32(MAC_MODE, tp->mac_mode);
+		netif_carrier_on(tp->dev);
+		spin_unlock_bh(&tp->lock);
+		netdev_info(dev, "Internal MAC loopback mode enabled.\n");
+	} else {
+		if (!(tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
+			return;
+
+		/* Disable internal MAC loopback mode */
+		tp->mac_mode &= ~MAC_MODE_PORT_INT_LPBACK;
+		spin_lock_bh(&tp->lock);
+		tw32(MAC_MODE, tp->mac_mode);
+		/* Force link status check */
+		tg3_setup_phy(tp, 1);
+		spin_unlock_bh(&tp->lock);
+		netdev_info(dev, "Internal MAC loopback mode disabled.\n");
 	}
+}
 
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
+static u32 tg3_fix_features(struct net_device *dev, u32 features)
+{
+	struct tg3 *tp = netdev_priv(dev);
+
+	if (dev->mtu > ETH_DATA_LEN && tg3_flag(tp, 5780_CLASS))
+		features &= ~NETIF_F_ALL_TSO;
+
+	return features;
+}
+
+static int tg3_set_features(struct net_device *dev, u32 features)
+{
+	u32 changed = dev->features ^ features;
+
+	if ((changed & NETIF_F_LOOPBACK) && netif_running(dev))
+		tg3_set_loopback(dev, features);
+
+	return 0;
 }
 
 static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
@@ -6132,16 +6178,18 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
 	dev->mtu = new_mtu;
 
 	if (new_mtu > ETH_DATA_LEN) {
-		if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
-			tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
-			ethtool_op_set_tso(dev, 0);
+		if (tg3_flag(tp, 5780_CLASS)) {
+			netdev_update_features(dev);
+			tg3_flag_clear(tp, TSO_CAPABLE);
 		} else {
-			tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
+			tg3_flag_set(tp, JUMBO_RING_ENABLE);
 		}
 	} else {
-		if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
-			tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
-		tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
+		if (tg3_flag(tp, 5780_CLASS)) {
+			tg3_flag_set(tp, TSO_CAPABLE);
+			netdev_update_features(dev);
+		}
+		tg3_flag_clear(tp, JUMBO_RING_ENABLE);
 	}
 }
 
@@ -6195,7 +6243,7 @@ static void tg3_rx_prodring_free(struct tg3 *tp,
 			tg3_rx_skb_free(tp, &tpr->rx_std_buffers[i],
 					tp->rx_pkt_map_sz);
 
-		if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+		if (tg3_flag(tp, JUMBO_CAPABLE)) {
 			for (i = tpr->rx_jmb_cons_idx;
 			     i != tpr->rx_jmb_prod_idx;
 			     i = (i + 1) & tp->rx_jmb_ring_mask) {
@@ -6211,8 +6259,7 @@ static void tg3_rx_prodring_free(struct tg3 *tp,
 		tg3_rx_skb_free(tp, &tpr->rx_std_buffers[i],
 				tp->rx_pkt_map_sz);
 
-	if ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+	if (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS)) {
 		for (i = 0; i <= tp->rx_jmb_ring_mask; i++)
 			tg3_rx_skb_free(tp, &tpr->rx_jmb_buffers[i],
 					TG3_RX_JMB_MAP_SZ);
@@ -6249,7 +6296,7 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
 	memset(tpr->rx_std, 0, TG3_RX_STD_RING_BYTES(tp));
 
 	rx_pkt_dma_sz = TG3_RX_STD_DMA_SZ;
-	if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
+	if (tg3_flag(tp, 5780_CLASS) &&
 	    tp->dev->mtu > ETH_DATA_LEN)
 		rx_pkt_dma_sz = TG3_RX_JMB_DMA_SZ;
 	tp->rx_pkt_map_sz = TG3_RX_DMA_TO_MAP_SZ(rx_pkt_dma_sz);
@@ -6282,13 +6329,12 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
 		}
 	}
 
-	if (!(tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) ||
-	    (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
+	if (!tg3_flag(tp, JUMBO_CAPABLE) || tg3_flag(tp, 5780_CLASS))
 		goto done;
 
 	memset(tpr->rx_jmb, 0, TG3_RX_JMB_RING_BYTES(tp));
 
-	if (!(tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE))
+	if (!tg3_flag(tp, JUMBO_RING_ENABLE))
 		goto done;
 
 	for (i = 0; i <= tp->rx_jmb_ring_mask; i++) {
@@ -6357,8 +6403,7 @@ static int tg3_rx_prodring_init(struct tg3 *tp,
 	if (!tpr->rx_std)
 		goto err_out;
 
-	if ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+	if (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS)) {
 		tpr->rx_jmb_buffers = kzalloc(TG3_RX_JMB_BUFF_RING_SIZE(tp),
 					      GFP_KERNEL);
 		if (!tpr->rx_jmb_buffers)
@@ -6556,8 +6601,8 @@ static int tg3_alloc_consistent(struct tg3 *tp)
 		/* If multivector TSS is enabled, vector 0 does not handle
 		 * tx interrupts.  Don't allocate any resources for it.
 		 */
-		if ((!i && !(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)) ||
-		    (i && (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS))) {
+		if ((!i && !tg3_flag(tp, ENABLE_TSS)) ||
+		    (i && tg3_flag(tp, ENABLE_TSS))) {
 			tnapi->tx_buffers = kzalloc(sizeof(struct ring_info) *
 						    TG3_TX_RING_SIZE,
 						    GFP_KERNEL);
@@ -6597,7 +6642,7 @@ static int tg3_alloc_consistent(struct tg3 *tp)
 		 * If multivector RSS is enabled, vector 0 does not handle
 		 * rx or tx interrupts.  Don't allocate any resources for it.
 		 */
-		if (!i && (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS))
+		if (!i && tg3_flag(tp, ENABLE_RSS))
 			continue;
 
 		tnapi->rx_rcb = dma_alloc_coherent(&tp->pdev->dev,
@@ -6627,7 +6672,7 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, int
 	unsigned int i;
 	u32 val;
 
-	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+	if (tg3_flag(tp, 5705_PLUS)) {
 		switch (ofs) {
 		case RCVLSC_MODE:
 		case DMAC_MODE:
@@ -6737,7 +6782,7 @@ static void tg3_ape_send_event(struct tg3 *tp, u32 event)
 	u32 apedata;
 
 	/* NCSI does not support APE events */
-	if (tp->tg3_flags3 & TG3_FLG3_APE_HAS_NCSI)
+	if (tg3_flag(tp, APE_HAS_NCSI))
 		return;
 
 	apedata = tg3_ape_read32(tp, TG3_APE_SEG_SIG);
@@ -6776,7 +6821,7 @@ static void tg3_ape_driver_state_change(struct tg3 *tp, int kind)
 	u32 event;
 	u32 apedata;
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
+	if (!tg3_flag(tp, ENABLE_APE))
 		return;
 
 	switch (kind) {
@@ -6805,7 +6850,7 @@ static void tg3_ape_driver_state_change(struct tg3 *tp, int kind)
 		tg3_ape_write32(tp, TG3_APE_HOST_SEG_SIG, 0x0);
 
 		if (device_may_wakeup(&tp->pdev->dev) &&
-		    (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)) {
+		    tg3_flag(tp, WOL_ENABLE)) {
 			tg3_ape_write32(tp, TG3_APE_HOST_WOL_SPEED,
 					    TG3_APE_HOST_WOL_SPEED_AUTO);
 			apedata = TG3_APE_HOST_DRVR_STATE_WOL;
@@ -6834,7 +6879,7 @@ static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind)
 	tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
 		      NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
 
-	if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
+	if (tg3_flag(tp, ASF_NEW_HANDSHAKE)) {
 		switch (kind) {
 		case RESET_KIND_INIT:
 			tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
@@ -6864,7 +6909,7 @@ static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind)
 /* tp->lock is held. */
 static void tg3_write_sig_post_reset(struct tg3 *tp, int kind)
 {
-	if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
+	if (tg3_flag(tp, ASF_NEW_HANDSHAKE)) {
 		switch (kind) {
 		case RESET_KIND_INIT:
 			tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
@@ -6888,7 +6933,7 @@ static void tg3_write_sig_post_reset(struct tg3 *tp, int kind)
 /* tp->lock is held. */
 static void tg3_write_sig_legacy(struct tg3 *tp, int kind)
 {
-	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+	if (tg3_flag(tp, ENABLE_ASF)) {
 		switch (kind) {
 		case RESET_KIND_INIT:
 			tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
@@ -6939,9 +6984,8 @@ static int tg3_poll_fw(struct tg3 *tp)
 	 * of the above loop as an error, but do report the lack of
 	 * running firmware once.
 	 */
-	if (i >= 100000 &&
-	    !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
-		tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
+	if (i >= 100000 && !tg3_flag(tp, NO_FWARE_REPORTED)) {
+		tg3_flag_set(tp, NO_FWARE_REPORTED);
 
 		netdev_info(tp->dev, "No firmware running\n");
 	}
@@ -6974,10 +7018,10 @@ static void tg3_restore_pci_state(struct tg3 *tp)
 	/* Set MAX PCI retry to zero. */
 	val = (PCISTATE_ROM_ENABLE | PCISTATE_ROM_RETRY_ENABLE);
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
-	    (tp->tg3_flags & TG3_FLAG_PCIX_MODE))
+	    tg3_flag(tp, PCIX_MODE))
 		val |= PCISTATE_RETRY_SAME_DMA;
 	/* Allow reads and writes to the APE register and memory space. */
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+	if (tg3_flag(tp, ENABLE_APE))
 		val |= PCISTATE_ALLOW_APE_CTLSPC_WR |
 		       PCISTATE_ALLOW_APE_SHMEM_WR |
 		       PCISTATE_ALLOW_APE_PSPACE_WR;
@@ -6986,7 +7030,7 @@ static void tg3_restore_pci_state(struct tg3 *tp)
 	pci_write_config_word(tp->pdev, PCI_COMMAND, tp->pci_cmd);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785) {
-		if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
+		if (tg3_flag(tp, PCI_EXPRESS))
 			pcie_set_readrq(tp->pdev, tp->pcie_readrq);
 		else {
 			pci_write_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
@@ -6997,7 +7041,7 @@ static void tg3_restore_pci_state(struct tg3 *tp)
 	}
 
 	/* Make sure PCI-X relaxed ordering bit is clear. */
-	if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+	if (tg3_flag(tp, PCIX_MODE)) {
 		u16 pcix_cmd;
 
 		pci_read_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD,
@@ -7007,12 +7051,12 @@ static void tg3_restore_pci_state(struct tg3 *tp)
 				      pcix_cmd);
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+	if (tg3_flag(tp, 5780_CLASS)) {
 
 		/* Chip reset on 5780 will reset MSI enable bit,
 		 * so need to restore it.
 		 */
-		if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
+		if (tg3_flag(tp, USING_MSI)) {
 			u16 ctrl;
 
 			pci_read_config_word(tp->pdev,
@@ -7052,7 +7096,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 	tg3_save_pci_state(tp);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
-	    (tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
+	    tg3_flag(tp, 5755_PLUS))
 		tw32(GRC_FASTBOOT_PC, 0);
 
 	/*
@@ -7071,7 +7115,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 	 * at this time, but the irq handler may still be called due to irq
 	 * sharing or irqpoll.
 	 */
-	tp->tg3_flags |= TG3_FLAG_CHIP_RESETTING;
+	tg3_flag_set(tp, CHIP_RESETTING);
 	for (i = 0; i < tp->irq_cnt; i++) {
 		struct tg3_napi *tnapi = &tp->napi[i];
 		if (tnapi->hw_status) {
@@ -7094,10 +7138,10 @@ static int tg3_chip_reset(struct tg3 *tp)
 	/* do the reset */
 	val = GRC_MISC_CFG_CORECLK_RESET;
 
-	if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+	if (tg3_flag(tp, PCI_EXPRESS)) {
 		/* Force PCIe 1.0a mode */
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
-		    !(tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
+		    !tg3_flag(tp, 57765_PLUS) &&
 		    tr32(TG3_PCIE_PHY_TSTCTL) ==
 		    (TG3_PCIE_PHY_TSTCTL_PCIE10 | TG3_PCIE_PHY_TSTCTL_PSCRAM))
 			tw32(TG3_PCIE_PHY_TSTCTL, TG3_PCIE_PHY_TSTCTL_PSCRAM);
@@ -7115,8 +7159,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 	}
 
 	/* Manage gphy power for all CPMU absent PCIe devices. */
-	if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
-	    !(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT))
+	if (tg3_flag(tp, 5705_PLUS) && !tg3_flag(tp, CPMU_PRESENT))
 		val |= GRC_MISC_CFG_KEEP_GPHY_POWER;
 
 	tw32(GRC_MISC_CFG, val);
@@ -7149,7 +7192,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	udelay(120);
 
-	if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && tp->pcie_cap) {
+	if (tg3_flag(tp, PCI_EXPRESS) && tp->pcie_cap) {
 		u16 val16;
 
 		if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A0) {
@@ -7175,7 +7218,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 		 * Older PCIe devices only support the 128 byte
 		 * MPS setting.  Enforce the restriction.
 		 */
-		if (!(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT))
+		if (!tg3_flag(tp, CPMU_PRESENT))
 			val16 &= ~PCI_EXP_DEVCTL_PAYLOAD;
 		pci_write_config_word(tp->pdev,
 				      tp->pcie_cap + PCI_EXP_DEVCTL,
@@ -7194,10 +7237,11 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	tg3_restore_pci_state(tp);
 
-	tp->tg3_flags &= ~TG3_FLAG_CHIP_RESETTING;
+	tg3_flag_clear(tp, CHIP_RESETTING);
+	tg3_flag_clear(tp, ERROR_PROCESSED);
 
 	val = 0;
-	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+	if (tg3_flag(tp, 5780_CLASS))
 		val = tr32(MEMARB_MODE);
 	tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
 
@@ -7222,7 +7266,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
 	}
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+	if (tg3_flag(tp, ENABLE_APE))
 		tp->mac_mode = MAC_MODE_APE_TX_EN |
 			       MAC_MODE_APE_RX_EN |
 			       MAC_MODE_TDE_ENABLE;
@@ -7247,28 +7291,33 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	tg3_mdio_start(tp);
 
-	if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
+	if (tg3_flag(tp, PCI_EXPRESS) &&
 	    tp->pci_chip_rev_id != CHIPREV_ID_5750_A0 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
-	    !(tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+	    !tg3_flag(tp, 57765_PLUS)) {
 		val = tr32(0x7c00);
 
 		tw32(0x7c00, val | (1 << 25));
 	}
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
+		val = tr32(TG3_CPMU_CLCK_ORIDE);
+		tw32(TG3_CPMU_CLCK_ORIDE, val & ~CPMU_CLCK_ORIDE_MAC_ORIDE_EN);
+	}
+
 	/* Reprobe ASF enable state.  */
-	tp->tg3_flags &= ~TG3_FLAG_ENABLE_ASF;
-	tp->tg3_flags2 &= ~TG3_FLG2_ASF_NEW_HANDSHAKE;
+	tg3_flag_clear(tp, ENABLE_ASF);
+	tg3_flag_clear(tp, ASF_NEW_HANDSHAKE);
 	tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
 	if (val == NIC_SRAM_DATA_SIG_MAGIC) {
 		u32 nic_cfg;
 
 		tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
 		if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
-			tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
+			tg3_flag_set(tp, ENABLE_ASF);
 			tp->last_event_jiffies = jiffies;
-			if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
-				tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
+			if (tg3_flag(tp, 5750_PLUS))
+				tg3_flag_set(tp, ASF_NEW_HANDSHAKE);
 		}
 	}
 
@@ -7278,8 +7327,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 /* tp->lock is held. */
 static void tg3_stop_fw(struct tg3 *tp)
 {
-	if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
-	   !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
+	if (tg3_flag(tp, ENABLE_ASF) && !tg3_flag(tp, ENABLE_APE)) {
 		/* Wait for RX cpu to ACK the previous event. */
 		tg3_wait_for_event_ack(tp);
 
@@ -7325,8 +7373,7 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
 {
 	int i;
 
-	BUG_ON(offset == TX_CPU_BASE &&
-	    (tp->tg3_flags2 & TG3_FLG2_5705_PLUS));
+	BUG_ON(offset == TX_CPU_BASE && tg3_flag(tp, 5705_PLUS));
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
 		u32 val = tr32(GRC_VCPU_EXT_CTRL);
@@ -7361,7 +7408,7 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
 	}
 
 	/* Clear firmware's nvram arbitration. */
-	if (tp->tg3_flags & TG3_FLAG_NVRAM)
+	if (tg3_flag(tp, NVRAM))
 		tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
 	return 0;
 }
@@ -7379,15 +7426,14 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
 	int err, lock_err, i;
 	void (*write_op)(struct tg3 *, u32, u32);
 
-	if (cpu_base == TX_CPU_BASE &&
-	    (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	if (cpu_base == TX_CPU_BASE && tg3_flag(tp, 5705_PLUS)) {
 		netdev_err(tp->dev,
 			   "%s: Trying to load TX cpu firmware which is 5705\n",
 			   __func__);
 		return -EINVAL;
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+	if (tg3_flag(tp, 5705_PLUS))
 		write_op = tg3_write_mem;
 	else
 		write_op = tg3_write_indirect_reg32;
@@ -7473,8 +7519,6 @@ static int tg3_load_5701_a0_firmware_fix(struct tg3 *tp)
 	return 0;
 }
 
-/* 5705 needs a special version of the TSO firmware.  */
-
 /* tp->lock is held. */
 static int tg3_load_tso_firmware(struct tg3 *tp)
 {
@@ -7483,7 +7527,9 @@ static int tg3_load_tso_firmware(struct tg3 *tp)
 	unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
 	int err, i;
 
-	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+	if (tg3_flag(tp, HW_TSO_1) ||
+	    tg3_flag(tp, HW_TSO_2) ||
+	    tg3_flag(tp, HW_TSO_3))
 		return 0;
 
 	fw_data = (void *)tp->fw->data;
@@ -7552,7 +7598,7 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
 	if (!netif_running(dev))
 		return 0;
 
-	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+	if (tg3_flag(tp, ENABLE_ASF)) {
 		u32 addr0_high, addr0_low, addr1_high, addr1_low;
 
 		addr0_high = tr32(MAC_ADDR_0_HIGH);
@@ -7587,7 +7633,7 @@ static void tg3_set_bdinfo(struct tg3 *tp, u32 bdinfo_addr,
 		      (bdinfo_addr + TG3_BDINFO_MAXLEN_FLAGS),
 		       maxlen_flags);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!tg3_flag(tp, 5705_PLUS))
 		tg3_write_mem(tp,
 			      (bdinfo_addr + TG3_BDINFO_NIC_ADDR),
 			      nic_addr);
@@ -7598,7 +7644,7 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
 {
 	int i;
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)) {
+	if (!tg3_flag(tp, ENABLE_TSS)) {
 		tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
 		tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
 		tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
@@ -7608,7 +7654,7 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
 		tw32(HOSTCC_TXCOAL_MAXF_INT, 0);
 	}
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)) {
+	if (!tg3_flag(tp, ENABLE_RSS)) {
 		tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
 		tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
 		tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
@@ -7618,7 +7664,7 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
 		tw32(HOSTCC_RXCOAL_MAXF_INT, 0);
 	}
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	if (!tg3_flag(tp, 5705_PLUS)) {
 		u32 val = ec->stats_block_coalesce_usecs;
 
 		tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq);
@@ -7640,7 +7686,7 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
 		reg = HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18;
 		tw32(reg, ec->rx_max_coalesced_frames_irq);
 
-		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS) {
+		if (tg3_flag(tp, ENABLE_TSS)) {
 			reg = HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18;
 			tw32(reg, ec->tx_coalesce_usecs);
 			reg = HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18;
@@ -7655,7 +7701,7 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
 		tw32(HOSTCC_RXMAX_FRAMES_VEC1 + i * 0x18, 0);
 		tw32(HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
 
-		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS) {
+		if (tg3_flag(tp, ENABLE_TSS)) {
 			tw32(HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18, 0);
 			tw32(HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18, 0);
 			tw32(HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
@@ -7671,10 +7717,9 @@ static void tg3_rings_reset(struct tg3 *tp)
 	struct tg3_napi *tnapi = &tp->napi[0];
 
 	/* Disable all transmit rings but the first. */
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!tg3_flag(tp, 5705_PLUS))
 		limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 16;
-	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-		 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+	else if (tg3_flag(tp, 5717_PLUS))
 		limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 4;
 	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 2;
@@ -7688,10 +7733,9 @@ static void tg3_rings_reset(struct tg3 *tp)
 
 
 	/* Disable all receive return rings but the first. */
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+	if (tg3_flag(tp, 5717_PLUS))
 		limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 17;
-	else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	else if (!tg3_flag(tp, 5705_PLUS))
 		limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16;
 	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
 		 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
@@ -7708,16 +7752,16 @@ static void tg3_rings_reset(struct tg3 *tp)
 	tw32_mailbox_f(tp->napi[0].int_mbox, 1);
 
 	/* Zero mailbox registers. */
-	if (tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX) {
+	if (tg3_flag(tp, SUPPORT_MSIX)) {
 		for (i = 1; i < tp->irq_max; i++) {
 			tp->napi[i].tx_prod = 0;
 			tp->napi[i].tx_cons = 0;
-			if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+			if (tg3_flag(tp, ENABLE_TSS))
 				tw32_mailbox(tp->napi[i].prodmbox, 0);
 			tw32_rx_mbox(tp->napi[i].consmbox, 0);
 			tw32_mailbox_f(tp->napi[i].int_mbox, 1);
 		}
-		if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS))
+		if (!tg3_flag(tp, ENABLE_TSS))
 			tw32_mailbox(tp->napi[0].prodmbox, 0);
 	} else {
 		tp->napi[0].tx_prod = 0;
@@ -7727,7 +7771,7 @@ static void tg3_rings_reset(struct tg3 *tp)
 	}
 
 	/* Make sure the NIC-based send BD rings are disabled. */
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	if (!tg3_flag(tp, 5705_PLUS)) {
 		u32 mbox = MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW;
 		for (i = 0; i < 16; i++)
 			tw32_tx_mbox(mbox + i * 8, 0);
@@ -7787,6 +7831,47 @@ static void tg3_rings_reset(struct tg3 *tp)
 	}
 }
 
+static void tg3_setup_rxbd_thresholds(struct tg3 *tp)
+{
+	u32 val, bdcache_maxcnt, host_rep_thresh, nic_rep_thresh;
+
+	if (!tg3_flag(tp, 5750_PLUS) ||
+	    tg3_flag(tp, 5780_CLASS) ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
+		bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5700;
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
+		 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
+		bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5755;
+	else
+		bdcache_maxcnt = TG3_SRAM_RX_STD_BDCACHE_SIZE_5906;
+
+	nic_rep_thresh = min(bdcache_maxcnt / 2, tp->rx_std_max_post);
+	host_rep_thresh = max_t(u32, tp->rx_pending / 8, 1);
+
+	val = min(nic_rep_thresh, host_rep_thresh);
+	tw32(RCVBDI_STD_THRESH, val);
+
+	if (tg3_flag(tp, 57765_PLUS))
+		tw32(STD_REPLENISH_LWM, bdcache_maxcnt);
+
+	if (!tg3_flag(tp, JUMBO_CAPABLE) || tg3_flag(tp, 5780_CLASS))
+		return;
+
+	if (!tg3_flag(tp, 5705_PLUS))
+		bdcache_maxcnt = TG3_SRAM_RX_JMB_BDCACHE_SIZE_5700;
+	else
+		bdcache_maxcnt = TG3_SRAM_RX_JMB_BDCACHE_SIZE_5717;
+
+	host_rep_thresh = max_t(u32, tp->rx_jumbo_pending / 8, 1);
+
+	val = min(bdcache_maxcnt / 2, host_rep_thresh);
+	tw32(RCVBDI_JUMBO_THRESH, val);
+
+	if (tg3_flag(tp, 57765_PLUS))
+		tw32(JMB_REPLENISH_LWM, bdcache_maxcnt);
+}
+
 /* tp->lock is held. */
 static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 {
@@ -7800,7 +7885,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 
 	tg3_write_sig_pre_reset(tp, RESET_KIND_INIT);
 
-	if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE)
+	if (tg3_flag(tp, INIT_COMPLETE))
 		tg3_abort_hw(tp, 1);
 
 	/* Enable MAC control of LPI */
@@ -7820,7 +7905,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
 			val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN;
 
-		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		if (tg3_flag(tp, ENABLE_APE))
 			val |= TG3_CPMU_EEEMD_APE_TX_DET_EN;
 
 		tw32_f(TG3_CPMU_EEE_MODE, val);
@@ -7879,7 +7964,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS);
 	}
 
-	if (tp->tg3_flags3 & TG3_FLG3_L1PLLPD_EN) {
+	if (tg3_flag(tp, L1PLLPD_EN)) {
 		u32 grc_mode = tr32(GRC_MODE);
 
 		/* Access the lower 1K of PL PCIE block registers. */
@@ -7909,6 +7994,22 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			tw32(GRC_MODE, grc_mode);
 		}
 
+		if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_57765_AX) {
+			u32 grc_mode = tr32(GRC_MODE);
+
+			/* Access the lower 1K of DL PCIE block registers. */
+			val = grc_mode & ~GRC_MODE_PCIE_PORT_MASK;
+			tw32(GRC_MODE, val | GRC_MODE_PCIE_DL_SEL);
+
+			val = tr32(TG3_PCIE_TLDLPL_PORT +
+				   TG3_PCIE_DL_LO_FTSMAX);
+			val &= ~TG3_PCIE_DL_LO_FTSMAX_MSK;
+			tw32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_DL_LO_FTSMAX,
+			     val | TG3_PCIE_DL_LO_FTSMAX_VAL);
+
+			tw32(GRC_MODE, grc_mode);
+		}
+
 		val = tr32(TG3_CPMU_LSPD_10MB_CLK);
 		val &= ~CPMU_LSPD_10MB_MACCLK_MASK;
 		val |= CPMU_LSPD_10MB_MACCLK_6_25;
@@ -7920,20 +8021,20 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	 * other revision.  But do not set this on PCI Express
 	 * chips and don't even touch the clocks if the CPMU is present.
 	 */
-	if (!(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT)) {
-		if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
+	if (!tg3_flag(tp, CPMU_PRESENT)) {
+		if (!tg3_flag(tp, PCI_EXPRESS))
 			tp->pci_clock_ctrl |= CLOCK_CTRL_DELAY_PCI_GRANT;
 		tw32_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
 	}
 
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
-	    (tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
+	    tg3_flag(tp, PCIX_MODE)) {
 		val = tr32(TG3PCI_PCISTATE);
 		val |= PCISTATE_RETRY_SAME_DMA;
 		tw32(TG3PCI_PCISTATE, val);
 	}
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+	if (tg3_flag(tp, ENABLE_APE)) {
 		/* Allow reads and writes to the
 		 * APE register and memory space.
 		 */
@@ -7960,11 +8061,14 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	if (err)
 		return err;
 
-	if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
+	if (tg3_flag(tp, 57765_PLUS)) {
 		val = tr32(TG3PCI_DMA_RW_CTRL) &
 		      ~DMA_RWCTRL_DIS_CACHE_ALIGNMENT;
 		if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0)
 			val &= ~DMA_RWCTRL_CRDRDR_RDMA_MRRS_MSK;
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57765 &&
+		    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
+			val |= DMA_RWCTRL_TAGGED_STAT_WA;
 		tw32(TG3PCI_DMA_RW_CTRL, val | tp->dma_rwctrl);
 	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 &&
 		   GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761) {
@@ -7999,7 +8103,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	tw32(GRC_MISC_CFG, val);
 
 	/* Initialize MBUF/DESC pool. */
-	if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
+	if (tg3_flag(tp, 5750_PLUS)) {
 		/* Do nothing.  */
 	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
 		tw32(BUFMGR_MB_POOL_ADDR, NIC_SRAM_MBUF_POOL_BASE);
@@ -8009,7 +8113,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE96);
 		tw32(BUFMGR_DMA_DESC_POOL_ADDR, NIC_SRAM_DMA_DESC_POOL_BASE);
 		tw32(BUFMGR_DMA_DESC_POOL_SIZE, NIC_SRAM_DMA_DESC_POOL_SIZE);
-	} else if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
+	} else if (tg3_flag(tp, TSO_CAPABLE)) {
 		int fw_len;
 
 		fw_len = tp->fw_len;
@@ -8043,6 +8147,10 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	val = BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE;
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
 		val |= BUFMGR_MODE_NO_TX_UNDERRUN;
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 ||
+	    tp->pci_chip_rev_id == CHIPREV_ID_5720_A0)
+		val |= BUFMGR_MODE_MBLOW_ATTN_ENAB;
 	tw32(BUFMGR_MODE, val);
 	for (i = 0; i < 2000; i++) {
 		if (tr32(BUFMGR_MODE) & BUFMGR_MODE_ENABLE)
@@ -8054,21 +8162,10 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		return -ENODEV;
 	}
 
-	/* Setup replenish threshold. */
-	val = tp->rx_pending / 8;
-	if (val == 0)
-		val = 1;
-	else if (val > tp->rx_std_max_post)
-		val = tp->rx_std_max_post;
-	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-		if (tp->pci_chip_rev_id == CHIPREV_ID_5906_A1)
-			tw32(ISO_PKT_TX, (tr32(ISO_PKT_TX) & ~0x3) | 0x2);
-
-		if (val > (TG3_RX_INTERNAL_RING_SZ_5906 / 2))
-			val = TG3_RX_INTERNAL_RING_SZ_5906 / 2;
-	}
+	if (tp->pci_chip_rev_id == CHIPREV_ID_5906_A1)
+		tw32(ISO_PKT_TX, (tr32(ISO_PKT_TX) & ~0x3) | 0x2);
 
-	tw32(RCVBDI_STD_THRESH, val);
+	tg3_setup_rxbd_thresholds(tp);
 
 	/* Initialize TG3_BDINFO's at:
 	 *  RCVDBDI_STD_BD:	standard eth size rx ring
@@ -8091,13 +8188,12 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	     ((u64) tpr->rx_std_mapping >> 32));
 	tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
 	     ((u64) tpr->rx_std_mapping & 0xffffffff));
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5719)
+	if (!tg3_flag(tp, 5717_PLUS))
 		tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
 		     NIC_SRAM_RX_BUFFER_DESC);
 
 	/* Disable the mini ring */
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!tg3_flag(tp, 5705_PLUS))
 		tw32(RCVDBDI_MINI_BD + TG3_BDINFO_MAXLEN_FLAGS,
 		     BDINFO_FLAGS_DISABLED);
 
@@ -8105,20 +8201,18 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	 * blocks on those devices that have them.
 	 */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
-	    ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))) {
-		/* Setup replenish threshold. */
-		tw32(RCVBDI_JUMBO_THRESH, tp->rx_jumbo_pending / 8);
+	    (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS))) {
 
-		if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
+		if (tg3_flag(tp, JUMBO_RING_ENABLE)) {
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
 			     ((u64) tpr->rx_jmb_mapping >> 32));
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
 			     ((u64) tpr->rx_jmb_mapping & 0xffffffff));
+			val = TG3_RX_JMB_RING_SIZE(tp) <<
+			      BDINFO_FLAGS_MAXLEN_SHIFT;
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
-			     (RX_JUMBO_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT) |
-			     BDINFO_FLAGS_USE_EXT_RECV);
-			if (!(tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) ||
+			     val | BDINFO_FLAGS_USE_EXT_RECV);
+			if (!tg3_flag(tp, USE_JUMBO_BDFLAG) ||
 			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 				tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
 				     NIC_SRAM_RX_JUMBO_BUFFER_DESC);
@@ -8127,32 +8221,27 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			     BDINFO_FLAGS_DISABLED);
 		}
 
-		if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
+		if (tg3_flag(tp, 57765_PLUS)) {
 			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
-				val = RX_STD_MAX_SIZE_5705;
+				val = TG3_RX_STD_MAX_SIZE_5700;
 			else
-				val = RX_STD_MAX_SIZE_5717;
+				val = TG3_RX_STD_MAX_SIZE_5717;
 			val <<= BDINFO_FLAGS_MAXLEN_SHIFT;
 			val |= (TG3_RX_STD_DMA_SZ << 2);
 		} else
 			val = TG3_RX_STD_DMA_SZ << BDINFO_FLAGS_MAXLEN_SHIFT;
 	} else
-		val = RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT;
+		val = TG3_RX_STD_MAX_SIZE_5700 << BDINFO_FLAGS_MAXLEN_SHIFT;
 
 	tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS, val);
 
 	tpr->rx_std_prod_idx = tp->rx_pending;
 	tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, tpr->rx_std_prod_idx);
 
-	tpr->rx_jmb_prod_idx = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
-			  tp->rx_jumbo_pending : 0;
+	tpr->rx_jmb_prod_idx =
+		tg3_flag(tp, JUMBO_RING_ENABLE) ? tp->rx_jumbo_pending : 0;
 	tw32_rx_mbox(TG3_RX_JMB_PROD_IDX_REG, tpr->rx_jmb_prod_idx);
 
-	if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
-		tw32(STD_REPLENISH_LWM, 32);
-		tw32(JMB_REPLENISH_LWM, 16);
-	}
-
 	tg3_rings_reset(tp);
 
 	/* Initialize MAC address and backoff seed. */
@@ -8165,10 +8254,16 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	/* The slot time is changed by tg3_setup_phy if we
 	 * run at gigabit with half duplex.
 	 */
-	tw32(MAC_TX_LENGTHS,
-	     (2 << TX_LENGTHS_IPG_CRS_SHIFT) |
-	     (6 << TX_LENGTHS_IPG_SHIFT) |
-	     (32 << TX_LENGTHS_SLOT_TIME_SHIFT));
+	val = (2 << TX_LENGTHS_IPG_CRS_SHIFT) |
+	      (6 << TX_LENGTHS_IPG_SHIFT) |
+	      (32 << TX_LENGTHS_SLOT_TIME_SHIFT);
+
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+		val |= tr32(MAC_TX_LENGTHS) &
+		       (TX_LENGTHS_JMB_FRM_LEN_MSK |
+			TX_LENGTHS_CNT_DWN_VAL_MSK);
+
+	tw32(MAC_TX_LENGTHS, val);
 
 	/* Receive rules. */
 	tw32(MAC_RCV_RULE_CFG, RCV_RULE_CFG_DEFAULT_CLASS);
@@ -8195,33 +8290,39 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
 	    tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
-		if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE &&
+		if (tg3_flag(tp, TSO_CAPABLE) &&
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
 			rdmac_mode |= RDMAC_MODE_FIFO_SIZE_128;
 		} else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
-			   !(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
+			   !tg3_flag(tp, IS_5788)) {
 			rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
 		}
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
+	if (tg3_flag(tp, PCI_EXPRESS))
 		rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
 
-	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+	if (tg3_flag(tp, HW_TSO_1) ||
+	    tg3_flag(tp, HW_TSO_2) ||
+	    tg3_flag(tp, HW_TSO_3))
 		rdmac_mode |= RDMAC_MODE_IPV4_LSO_EN;
 
-	if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+	if (tg3_flag(tp, 57765_PLUS) ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
 		rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN;
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+		rdmac_mode |= tr32(RDMAC_MODE) & RDMAC_MODE_H2BNC_VLAN_DET;
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
-	    (tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+	    tg3_flag(tp, 57765_PLUS)) {
 		val = tr32(TG3_RDMA_RSRVCTRL_REG);
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
 			val &= ~(TG3_RDMA_RSRVCTRL_TXMRGN_MASK |
 				 TG3_RDMA_RSRVCTRL_FIFO_LWM_MASK |
 				 TG3_RDMA_RSRVCTRL_FIFO_HWM_MASK);
@@ -8233,7 +8334,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		     val | TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX);
 	}
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
 		val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
 		tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val |
 		     TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K |
@@ -8241,12 +8343,12 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	}
 
 	/* Receive/send statistics. */
-	if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
+	if (tg3_flag(tp, 5750_PLUS)) {
 		val = tr32(RCVLPC_STATS_ENABLE);
 		val &= ~RCVLPC_STATSENAB_DACK_FIX;
 		tw32(RCVLPC_STATS_ENABLE, val);
 	} else if ((rdmac_mode & RDMAC_MODE_FIFO_SIZE_128) &&
-		   (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
+		   tg3_flag(tp, TSO_CAPABLE)) {
 		val = tr32(RCVLPC_STATS_ENABLE);
 		val &= ~RCVLPC_STATSENAB_LNGBRST_RFIX;
 		tw32(RCVLPC_STATS_ENABLE, val);
@@ -8269,7 +8371,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 
 	__tg3_set_coalesce(tp, &tp->coal);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	if (!tg3_flag(tp, 5705_PLUS)) {
 		/* Status/statistics block address.  See tg3_timer,
 		 * the tg3_periodic_fetch_stats call there, and
 		 * tg3_get_stats to see how this works for 5705/5750 chips.
@@ -8295,7 +8397,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 
 	tw32(RCVCC_MODE, RCVCC_MODE_ENABLE | RCVCC_MODE_ATTN_ENABLE);
 	tw32(RCVLPC_MODE, RCVLPC_MODE_ENABLE);
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!tg3_flag(tp, 5705_PLUS))
 		tw32(RCVLSC_MODE, RCVLSC_MODE_ENABLE | RCVLSC_MODE_ATTN_ENABLE);
 
 	if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) {
@@ -8305,13 +8407,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		udelay(10);
 	}
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+	if (tg3_flag(tp, ENABLE_APE))
 		tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
 	else
 		tp->mac_mode = 0;
 	tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
 		MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+	if (!tg3_flag(tp, 5705_PLUS) &&
 	    !(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
 		tp->mac_mode |= MAC_MODE_LINK_POLARITY;
@@ -8319,12 +8421,12 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	udelay(40);
 
 	/* tp->grc_local_ctrl is partially set up during tg3_get_invariants().
-	 * If TG3_FLG2_IS_NIC is zero, we should read the
+	 * If TG3_FLAG_IS_NIC is zero, we should read the
 	 * register to preserve the GPIO settings for LOMs. The GPIOs,
 	 * whether used as inputs or outputs, are set by boot code after
 	 * reset.
 	 */
-	if (!(tp->tg3_flags2 & TG3_FLG2_IS_NIC)) {
+	if (!tg3_flag(tp, IS_NIC)) {
 		u32 gpio_mask;
 
 		gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE1 |
@@ -8342,21 +8444,20 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask;
 
 		/* GPIO1 must be driven high for eeprom write protect */
-		if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)
+		if (tg3_flag(tp, EEPROM_WRITE_PROT))
 			tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
 					       GRC_LCLCTRL_GPIO_OUTPUT1);
 	}
 	tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
 	udelay(100);
 
-	if ((tp->tg3_flags2 & TG3_FLG2_USING_MSIX) &&
-		tp->irq_cnt > 1) {
+	if (tg3_flag(tp, USING_MSIX) && tp->irq_cnt > 1) {
 		val = tr32(MSGINT_MODE);
 		val |= MSGINT_MODE_MULTIVEC_EN | MSGINT_MODE_ENABLE;
 		tw32(MSGINT_MODE, val);
 	}
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	if (!tg3_flag(tp, 5705_PLUS)) {
 		tw32_f(DMAC_MODE, DMAC_MODE_ENABLE);
 		udelay(40);
 	}
@@ -8369,18 +8470,18 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
 	    tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
-		if ((tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
+		if (tg3_flag(tp, TSO_CAPABLE) &&
 		    (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 ||
 		     tp->pci_chip_rev_id == CHIPREV_ID_5705_A2)) {
 			/* nothing */
 		} else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
-			   !(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
+			   !tg3_flag(tp, IS_5788)) {
 			val |= WDMAC_MODE_RX_ACCEL;
 		}
 	}
 
 	/* Enable host coalescing bug fix */
-	if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
+	if (tg3_flag(tp, 5755_PLUS))
 		val |= WDMAC_MODE_STATUS_TAG_FIX;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
@@ -8389,7 +8490,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	tw32_f(WDMAC_MODE, val);
 	udelay(40);
 
-	if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+	if (tg3_flag(tp, PCIX_MODE)) {
 		u16 pcix_cmd;
 
 		pci_read_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD,
@@ -8409,7 +8510,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	udelay(40);
 
 	tw32(RCVDCC_MODE, RCVDCC_MODE_ENABLE | RCVDCC_MODE_ATTN_ENABLE);
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!tg3_flag(tp, 5705_PLUS))
 		tw32(MBFREE_MODE, MBFREE_MODE_ENABLE);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761)
@@ -8421,15 +8522,16 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	tw32(SNDBDC_MODE, SNDBDC_MODE_ENABLE | SNDBDC_MODE_ATTN_ENABLE);
 	tw32(RCVBDI_MODE, RCVBDI_MODE_ENABLE | RCVBDI_MODE_RCB_ATTN_ENAB);
 	val = RCVDBDI_MODE_ENABLE | RCVDBDI_MODE_INV_RING_SZ;
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+	if (tg3_flag(tp, LRG_PROD_RING_CAP))
 		val |= RCVDBDI_MODE_LRG_RING_SZ;
 	tw32(RCVDBDI_MODE, val);
 	tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE);
-	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+	if (tg3_flag(tp, HW_TSO_1) ||
+	    tg3_flag(tp, HW_TSO_2) ||
+	    tg3_flag(tp, HW_TSO_3))
 		tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE | 0x8);
 	val = SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE;
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+	if (tg3_flag(tp, ENABLE_TSS))
 		val |= SNDBDI_MODE_MULTI_TXQ_EN;
 	tw32(SNDBDI_MODE, val);
 	tw32(SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE);
@@ -8440,20 +8542,28 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			return err;
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
+	if (tg3_flag(tp, TSO_CAPABLE)) {
 		err = tg3_load_tso_firmware(tp);
 		if (err)
 			return err;
 	}
 
 	tp->tx_mode = TX_MODE_ENABLE;
-	if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
+
+	if (tg3_flag(tp, 5755_PLUS) ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		tp->tx_mode |= TX_MODE_MBUF_LOCKUP_FIX;
+
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
+		val = TX_MODE_JMB_FRM_LEN | TX_MODE_CNT_DN_MODE;
+		tp->tx_mode &= ~val;
+		tp->tx_mode |= tr32(MAC_TX_MODE) & val;
+	}
+
 	tw32_f(MAC_TX_MODE, tp->tx_mode);
 	udelay(100);
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) {
+	if (tg3_flag(tp, ENABLE_RSS)) {
 		u32 reg = MAC_RSS_INDIR_TBL_0;
 		u8 *ent = (u8 *)&val;
 
@@ -8482,10 +8592,10 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	}
 
 	tp->rx_mode = RX_MODE_ENABLE;
-	if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
+	if (tg3_flag(tp, 5755_PLUS))
 		tp->rx_mode |= RX_MODE_IPV6_CSUM_ENABLE;
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)
+	if (tg3_flag(tp, ENABLE_RSS))
 		tp->rx_mode |= RX_MODE_RSS_ENABLE |
 			       RX_MODE_RSS_ITBL_HASH_BITS_7 |
 			       RX_MODE_RSS_IPV6_HASH_EN |
@@ -8532,11 +8642,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
 	    (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) {
 		/* Use hardware link auto-negotiation */
-		tp->tg3_flags2 |= TG3_FLG2_HW_AUTONEG;
+		tg3_flag_set(tp, HW_AUTONEG);
 	}
 
 	if ((tp->phy_flags & TG3_PHYFLG_MII_SERDES) &&
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714)) {
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
 		u32 tmp;
 
 		tmp = tr32(SERDES_RX_CTRL);
@@ -8546,7 +8656,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
 	}
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
+	if (!tg3_flag(tp, USE_PHYLIB)) {
 		if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
 			tp->phy_flags &= ~TG3_PHYFLG_IS_LOW_POWER;
 			tp->link_config.speed = tp->link_config.orig_speed;
@@ -8579,12 +8689,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	tw32(MAC_RCV_RULE_1,  0x86000004 & RCV_RULE_DISABLE_MASK);
 	tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
 
-	if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
+	if (tg3_flag(tp, 5705_PLUS) && !tg3_flag(tp, 5780_CLASS))
 		limit = 8;
 	else
 		limit = 16;
-	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF)
+	if (tg3_flag(tp, ENABLE_ASF))
 		limit -= 4;
 	switch (limit) {
 	case 16:
@@ -8622,7 +8731,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		break;
 	}
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+	if (tg3_flag(tp, ENABLE_APE))
 		/* Write our heartbeat update interval to APE. */
 		tg3_ape_write32(tp, TG3_APE_HOST_HEARTBEAT_INT_MS,
 				APE_HOST_HEARTBEAT_INT_DISABLE);
@@ -8688,7 +8797,21 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp)
 	TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
 
 	TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
-	TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
+	    tp->pci_chip_rev_id != CHIPREV_ID_5719_A0 &&
+	    tp->pci_chip_rev_id != CHIPREV_ID_5720_A0) {
+		TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+	} else {
+		u32 val = tr32(HOSTCC_FLOW_ATTN);
+		val = (val & HOSTCC_FLOW_ATTN_MBUF_LWM) ? 1 : 0;
+		if (val) {
+			tw32(HOSTCC_FLOW_ATTN, HOSTCC_FLOW_ATTN_MBUF_LWM);
+			sp->rx_discards.low += val;
+			if (sp->rx_discards.low < val)
+				sp->rx_discards.high += 1;
+		}
+		sp->mbuf_lwm_thresh_hit = sp->rx_discards;
+	}
 	TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
 }
 
@@ -8701,7 +8824,7 @@ static void tg3_timer(unsigned long __opaque)
 
 	spin_lock(&tp->lock);
 
-	if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+	if (!tg3_flag(tp, TAGGED_STATUS)) {
 		/* All of this garbage is because when using non-tagged
 		 * IRQ status the mailbox/status_block protocol the chip
 		 * uses with the cpu is race prone.
@@ -8715,7 +8838,7 @@ static void tg3_timer(unsigned long __opaque)
 		}
 
 		if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
-			tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER;
+			tg3_flag_set(tp, RESTART_TIMER);
 			spin_unlock(&tp->lock);
 			schedule_work(&tp->reset_task);
 			return;
@@ -8724,16 +8847,13 @@ static void tg3_timer(unsigned long __opaque)
 
 	/* This part only runs once per second. */
 	if (!--tp->timer_counter) {
-		if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+		if (tg3_flag(tp, 5705_PLUS))
 			tg3_periodic_fetch_stats(tp);
 
-		if (tp->setlpicnt && !--tp->setlpicnt) {
-			u32 val = tr32(TG3_CPMU_EEE_MODE);
-			tw32(TG3_CPMU_EEE_MODE,
-			     val | TG3_CPMU_EEEMD_LPI_ENABLE);
-		}
+		if (tp->setlpicnt && !--tp->setlpicnt)
+			tg3_phy_eee_enable(tp);
 
-		if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
+		if (tg3_flag(tp, USE_LINKCHG_REG)) {
 			u32 mac_stat;
 			int phy_event;
 
@@ -8748,7 +8868,7 @@ static void tg3_timer(unsigned long __opaque)
 
 			if (phy_event)
 				tg3_setup_phy(tp, 0);
-		} else if (tp->tg3_flags & TG3_FLAG_POLL_SERDES) {
+		} else if (tg3_flag(tp, POLL_SERDES)) {
 			u32 mac_stat = tr32(MAC_STATUS);
 			int need_setup = 0;
 
@@ -8773,7 +8893,7 @@ static void tg3_timer(unsigned long __opaque)
 				tg3_setup_phy(tp, 0);
 			}
 		} else if ((tp->phy_flags & TG3_PHYFLG_MII_SERDES) &&
-			   (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+			   tg3_flag(tp, 5780_CLASS)) {
 			tg3_serdes_parallel_detect(tp);
 		}
 
@@ -8798,8 +8918,7 @@ static void tg3_timer(unsigned long __opaque)
 	 * resets.
 	 */
 	if (!--tp->asf_counter) {
-		if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
-		    !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
+		if (tg3_flag(tp, ENABLE_ASF) && !tg3_flag(tp, ENABLE_APE)) {
 			tg3_wait_for_event_ack(tp);
 
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX,
@@ -8835,16 +8954,16 @@ static int tg3_request_irq(struct tg3 *tp, int irq_num)
 		name[IFNAMSIZ-1] = 0;
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_USING_MSI_OR_MSIX) {
+	if (tg3_flag(tp, USING_MSI) || tg3_flag(tp, USING_MSIX)) {
 		fn = tg3_msi;
-		if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
+		if (tg3_flag(tp, 1SHOT_MSI))
 			fn = tg3_msi_1shot;
-		flags = IRQF_SAMPLE_RANDOM;
+		flags = 0;
 	} else {
 		fn = tg3_interrupt;
-		if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+		if (tg3_flag(tp, TAGGED_STATUS))
 			fn = tg3_interrupt_tagged;
-		flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
+		flags = IRQF_SHARED;
 	}
 
 	return request_irq(tnapi->irq_vec, fn, flags, name, tnapi);
@@ -8868,8 +8987,7 @@ static int tg3_test_interrupt(struct tg3 *tp)
 	 * Turn off MSI one shot mode.  Otherwise this test has no
 	 * observable way to know whether the interrupt was delivered.
 	 */
-	if ((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
-	    (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
+	if (tg3_flag(tp, 57765_PLUS) && tg3_flag(tp, USING_MSI)) {
 		val = tr32(MSGINT_MODE) | MSGINT_MODE_ONE_SHOT_DISABLE;
 		tw32(MSGINT_MODE, val);
 	}
@@ -8911,8 +9029,7 @@ static int tg3_test_interrupt(struct tg3 *tp)
 
 	if (intr_ok) {
 		/* Reenable MSI one shot mode. */
-		if ((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
-		    (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
+		if (tg3_flag(tp, 57765_PLUS) && tg3_flag(tp, USING_MSI)) {
 			val = tr32(MSGINT_MODE) & ~MSGINT_MODE_ONE_SHOT_DISABLE;
 			tw32(MSGINT_MODE, val);
 		}
@@ -8930,7 +9047,7 @@ static int tg3_test_msi(struct tg3 *tp)
 	int err;
 	u16 pci_cmd;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSI))
+	if (!tg3_flag(tp, USING_MSI))
 		return 0;
 
 	/* Turn off SERR reporting in case MSI terminates with Master
@@ -8960,7 +9077,7 @@ static int tg3_test_msi(struct tg3 *tp)
 
 	pci_disable_msi(tp->pdev);
 
-	tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
+	tg3_flag_clear(tp, USING_MSI);
 	tp->napi[0].irq_vec = tp->pdev->irq;
 
 	err = tg3_request_irq(tp, 0);
@@ -9057,9 +9174,11 @@ static bool tg3_enable_msix(struct tg3 *tp)
 	}
 
 	if (tp->irq_cnt > 1) {
-		tp->tg3_flags3 |= TG3_FLG3_ENABLE_RSS;
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
-			tp->tg3_flags3 |= TG3_FLG3_ENABLE_TSS;
+		tg3_flag_set(tp, ENABLE_RSS);
+
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
+			tg3_flag_set(tp, ENABLE_TSS);
 			netif_set_real_num_tx_queues(tp->dev, tp->irq_cnt - 1);
 		}
 	}
@@ -9069,8 +9188,8 @@ static bool tg3_enable_msix(struct tg3 *tp)
 
 static void tg3_ints_init(struct tg3 *tp)
 {
-	if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSI_OR_MSIX) &&
-	    !(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+	if ((tg3_flag(tp, SUPPORT_MSI) || tg3_flag(tp, SUPPORT_MSIX)) &&
+	    !tg3_flag(tp, TAGGED_STATUS)) {
 		/* All MSI supporting chips should support tagged
 		 * status.  Assert that this is the case.
 		 */
@@ -9079,21 +9198,19 @@ static void tg3_ints_init(struct tg3 *tp)
 		goto defcfg;
 	}
 
-	if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX) && tg3_enable_msix(tp))
-		tp->tg3_flags2 |= TG3_FLG2_USING_MSIX;
-	else if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSI) &&
-		 pci_enable_msi(tp->pdev) == 0)
-		tp->tg3_flags2 |= TG3_FLG2_USING_MSI;
+	if (tg3_flag(tp, SUPPORT_MSIX) && tg3_enable_msix(tp))
+		tg3_flag_set(tp, USING_MSIX);
+	else if (tg3_flag(tp, SUPPORT_MSI) && pci_enable_msi(tp->pdev) == 0)
+		tg3_flag_set(tp, USING_MSI);
 
-	if (tp->tg3_flags2 & TG3_FLG2_USING_MSI_OR_MSIX) {
+	if (tg3_flag(tp, USING_MSI) || tg3_flag(tp, USING_MSIX)) {
 		u32 msi_mode = tr32(MSGINT_MODE);
-		if ((tp->tg3_flags2 & TG3_FLG2_USING_MSIX) &&
-		    tp->irq_cnt > 1)
+		if (tg3_flag(tp, USING_MSIX) && tp->irq_cnt > 1)
 			msi_mode |= MSGINT_MODE_MULTIVEC_EN;
 		tw32(MSGINT_MODE, msi_mode | MSGINT_MODE_ENABLE);
 	}
 defcfg:
-	if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSIX)) {
+	if (!tg3_flag(tp, USING_MSIX)) {
 		tp->irq_cnt = 1;
 		tp->napi[0].irq_vec = tp->pdev->irq;
 		netif_set_real_num_tx_queues(tp->dev, 1);
@@ -9103,12 +9220,14 @@ defcfg:
 
 static void tg3_ints_fini(struct tg3 *tp)
 {
-	if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+	if (tg3_flag(tp, USING_MSIX))
 		pci_disable_msix(tp->pdev);
-	else if (tp->tg3_flags2 & TG3_FLG2_USING_MSI)
+	else if (tg3_flag(tp, USING_MSI))
 		pci_disable_msi(tp->pdev);
-	tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI_OR_MSIX;
-	tp->tg3_flags3 &= ~(TG3_FLG3_ENABLE_RSS | TG3_FLG3_ENABLE_TSS);
+	tg3_flag_clear(tp, USING_MSI);
+	tg3_flag_clear(tp, USING_MSIX);
+	tg3_flag_clear(tp, ENABLE_RSS);
+	tg3_flag_clear(tp, ENABLE_TSS);
 }
 
 static int tg3_open(struct net_device *dev)
@@ -9123,10 +9242,10 @@ static int tg3_open(struct net_device *dev)
 				return err;
 		} else if (err) {
 			netdev_warn(tp->dev, "TSO capability disabled\n");
-			tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
-		} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
+			tg3_flag_clear(tp, TSO_CAPABLE);
+		} else if (!tg3_flag(tp, TSO_CAPABLE)) {
 			netdev_notice(tp->dev, "TSO capability restored\n");
-			tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+			tg3_flag_set(tp, TSO_CAPABLE);
 		}
 	}
 
@@ -9139,7 +9258,7 @@ static int tg3_open(struct net_device *dev)
 	tg3_full_lock(tp, 0);
 
 	tg3_disable_ints(tp);
-	tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
+	tg3_flag_clear(tp, INIT_COMPLETE);
 
 	tg3_full_unlock(tp);
 
@@ -9180,7 +9299,7 @@ static int tg3_open(struct net_device *dev)
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_free_rings(tp);
 	} else {
-		if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
+		if (tg3_flag(tp, TAGGED_STATUS))
 			tp->timer_offset = HZ;
 		else
 			tp->timer_offset = HZ / 10;
@@ -9202,7 +9321,7 @@ static int tg3_open(struct net_device *dev)
 	if (err)
 		goto err_out3;
 
-	if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
+	if (tg3_flag(tp, USING_MSI)) {
 		err = tg3_test_msi(tp);
 
 		if (err) {
@@ -9214,8 +9333,7 @@ static int tg3_open(struct net_device *dev)
 			goto err_out2;
 		}
 
-		if (!(tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
-		    (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
+		if (!tg3_flag(tp, 57765_PLUS) && tg3_flag(tp, USING_MSI)) {
 			u32 val = tr32(PCIE_TRANSACTION_CFG);
 
 			tw32(PCIE_TRANSACTION_CFG,
@@ -9228,13 +9346,20 @@ static int tg3_open(struct net_device *dev)
 	tg3_full_lock(tp, 0);
 
 	add_timer(&tp->timer);
-	tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+	tg3_flag_set(tp, INIT_COMPLETE);
 	tg3_enable_ints(tp);
 
 	tg3_full_unlock(tp);
 
 	netif_tx_start_all_queues(dev);
 
+	/*
+	 * Reset loopback feature if it was turned on while the device was down
+	 * make sure that it's installed properly now.
+	 */
+	if (dev->features & NETIF_F_LOOPBACK)
+		tg3_set_loopback(dev, dev->features);
+
 	return 0;
 
 err_out3:
@@ -9277,7 +9402,7 @@ static int tg3_close(struct net_device *dev)
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 	tg3_free_rings(tp);
-	tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
+	tg3_flag_clear(tp, INIT_COMPLETE);
 
 	tg3_full_unlock(tp);
 
@@ -9424,6 +9549,8 @@ static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp)
 	ESTAT_ADD(nic_avoided_irqs);
 	ESTAT_ADD(nic_tx_threshold_hit);
 
+	ESTAT_ADD(mbuf_lwm_thresh_hit);
+
 	return estats;
 }
 
@@ -9534,7 +9661,7 @@ static void __tg3_set_rx_mode(struct net_device *dev)
 	/* When ASF is in use, we always keep the RX_MODE_KEEP_VLAN_TAG
 	 * flag clear.
 	 */
-	if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+	if (!tg3_flag(tp, ENABLE_ASF))
 		rx_mode |= RX_MODE_KEEP_VLAN_TAG;
 #endif
 
@@ -9588,82 +9715,26 @@ static void tg3_set_rx_mode(struct net_device *dev)
 	tg3_full_unlock(tp);
 }
 
-#define TG3_REGDUMP_LEN		(32 * 1024)
-
 static int tg3_get_regs_len(struct net_device *dev)
 {
-	return TG3_REGDUMP_LEN;
+	return TG3_REG_BLK_SIZE;
 }
 
 static void tg3_get_regs(struct net_device *dev,
 		struct ethtool_regs *regs, void *_p)
 {
-	u32 *p = _p;
 	struct tg3 *tp = netdev_priv(dev);
-	u8 *orig_p = _p;
-	int i;
 
 	regs->version = 0;
 
-	memset(p, 0, TG3_REGDUMP_LEN);
+	memset(_p, 0, TG3_REG_BLK_SIZE);
 
 	if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
 		return;
 
 	tg3_full_lock(tp, 0);
 
-#define __GET_REG32(reg)	(*(p)++ = tr32(reg))
-#define GET_REG32_LOOP(base, len)		\
-do {	p = (u32 *)(orig_p + (base));		\
-	for (i = 0; i < len; i += 4)		\
-		__GET_REG32((base) + i);	\
-} while (0)
-#define GET_REG32_1(reg)			\
-do {	p = (u32 *)(orig_p + (reg));		\
-	__GET_REG32((reg));			\
-} while (0)
-
-	GET_REG32_LOOP(TG3PCI_VENDOR, 0xb0);
-	GET_REG32_LOOP(MAILBOX_INTERRUPT_0, 0x200);
-	GET_REG32_LOOP(MAC_MODE, 0x4f0);
-	GET_REG32_LOOP(SNDDATAI_MODE, 0xe0);
-	GET_REG32_1(SNDDATAC_MODE);
-	GET_REG32_LOOP(SNDBDS_MODE, 0x80);
-	GET_REG32_LOOP(SNDBDI_MODE, 0x48);
-	GET_REG32_1(SNDBDC_MODE);
-	GET_REG32_LOOP(RCVLPC_MODE, 0x20);
-	GET_REG32_LOOP(RCVLPC_SELLST_BASE, 0x15c);
-	GET_REG32_LOOP(RCVDBDI_MODE, 0x0c);
-	GET_REG32_LOOP(RCVDBDI_JUMBO_BD, 0x3c);
-	GET_REG32_LOOP(RCVDBDI_BD_PROD_IDX_0, 0x44);
-	GET_REG32_1(RCVDCC_MODE);
-	GET_REG32_LOOP(RCVBDI_MODE, 0x20);
-	GET_REG32_LOOP(RCVCC_MODE, 0x14);
-	GET_REG32_LOOP(RCVLSC_MODE, 0x08);
-	GET_REG32_1(MBFREE_MODE);
-	GET_REG32_LOOP(HOSTCC_MODE, 0x100);
-	GET_REG32_LOOP(MEMARB_MODE, 0x10);
-	GET_REG32_LOOP(BUFMGR_MODE, 0x58);
-	GET_REG32_LOOP(RDMAC_MODE, 0x08);
-	GET_REG32_LOOP(WDMAC_MODE, 0x08);
-	GET_REG32_1(RX_CPU_MODE);
-	GET_REG32_1(RX_CPU_STATE);
-	GET_REG32_1(RX_CPU_PGMCTR);
-	GET_REG32_1(RX_CPU_HWBKPT);
-	GET_REG32_1(TX_CPU_MODE);
-	GET_REG32_1(TX_CPU_STATE);
-	GET_REG32_1(TX_CPU_PGMCTR);
-	GET_REG32_LOOP(GRCMBOX_INTERRUPT_0, 0x110);
-	GET_REG32_LOOP(FTQ_RESET, 0x120);
-	GET_REG32_LOOP(MSGINT_MODE, 0x0c);
-	GET_REG32_1(DMAC_MODE);
-	GET_REG32_LOOP(GRC_MODE, 0x4c);
-	if (tp->tg3_flags & TG3_FLAG_NVRAM)
-		GET_REG32_LOOP(NVRAM_CMD, 0x24);
-
-#undef __GET_REG32
-#undef GET_REG32_LOOP
-#undef GET_REG32_1
+	tg3_dump_legacy_regs(tp, (u32 *)_p);
 
 	tg3_full_unlock(tp);
 }
@@ -9683,7 +9754,7 @@ static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 	u32 i, offset, len, b_offset, b_count;
 	__be32 val;
 
-	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+	if (tg3_flag(tp, NO_NVRAM))
 		return -EINVAL;
 
 	if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
@@ -9712,7 +9783,7 @@ static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 		eeprom->len += b_count;
 	}
 
-	/* read bytes upto the last 4 byte boundary */
+	/* read bytes up to the last 4 byte boundary */
 	pd = &data[eeprom->len];
 	for (i = 0; i < (len - (len & 3)); i += 4) {
 		ret = tg3_nvram_read_be32(tp, offset + i, &val);
@@ -9751,7 +9822,7 @@ static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 	if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
 		return -EAGAIN;
 
-	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
+	if (tg3_flag(tp, NO_NVRAM) ||
 	    eeprom->magic != TG3_EEPROM_MAGIC)
 		return -EINVAL;
 
@@ -9803,7 +9874,7 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct tg3 *tp = netdev_priv(dev);
 
-	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+	if (tg3_flag(tp, USE_PHYLIB)) {
 		struct phy_device *phydev;
 		if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
 			return -EAGAIN;
@@ -9831,10 +9902,10 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	cmd->advertising = tp->link_config.advertising;
 	if (netif_running(dev)) {
-		cmd->speed = tp->link_config.active_speed;
+		ethtool_cmd_speed_set(cmd, tp->link_config.active_speed);
 		cmd->duplex = tp->link_config.active_duplex;
 	} else {
-		cmd->speed = SPEED_INVALID;
+		ethtool_cmd_speed_set(cmd, SPEED_INVALID);
 		cmd->duplex = DUPLEX_INVALID;
 	}
 	cmd->phy_address = tp->phy_addr;
@@ -9848,8 +9919,9 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct tg3 *tp = netdev_priv(dev);
+	u32 speed = ethtool_cmd_speed(cmd);
 
-	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+	if (tg3_flag(tp, USE_PHYLIB)) {
 		struct phy_device *phydev;
 		if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
 			return -EAGAIN;
@@ -9897,14 +9969,14 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cmd->advertising &= mask;
 	} else {
 		if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES) {
-			if (cmd->speed != SPEED_1000)
+			if (speed != SPEED_1000)
 				return -EINVAL;
 
 			if (cmd->duplex != DUPLEX_FULL)
 				return -EINVAL;
 		} else {
-			if (cmd->speed != SPEED_100 &&
-			    cmd->speed != SPEED_10)
+			if (speed != SPEED_100 &&
+			    speed != SPEED_10)
 				return -EINVAL;
 		}
 	}
@@ -9919,7 +9991,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		tp->link_config.duplex = DUPLEX_INVALID;
 	} else {
 		tp->link_config.advertising = 0;
-		tp->link_config.speed = cmd->speed;
+		tp->link_config.speed = speed;
 		tp->link_config.duplex = cmd->duplex;
 	}
 
@@ -9949,14 +10021,12 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct tg3 *tp = netdev_priv(dev);
 
-	if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
-	    device_can_wakeup(&tp->pdev->dev))
+	if (tg3_flag(tp, WOL_CAP) && device_can_wakeup(&tp->pdev->dev))
 		wol->supported = WAKE_MAGIC;
 	else
 		wol->supported = 0;
 	wol->wolopts = 0;
-	if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) &&
-	    device_can_wakeup(&tp->pdev->dev))
+	if (tg3_flag(tp, WOL_ENABLE) && device_can_wakeup(&tp->pdev->dev))
 		wol->wolopts = WAKE_MAGIC;
 	memset(&wol->sopass, 0, sizeof(wol->sopass));
 }
@@ -9969,19 +10039,18 @@ static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & ~WAKE_MAGIC)
 		return -EINVAL;
 	if ((wol->wolopts & WAKE_MAGIC) &&
-	    !((tp->tg3_flags & TG3_FLAG_WOL_CAP) && device_can_wakeup(dp)))
+	    !(tg3_flag(tp, WOL_CAP) && device_can_wakeup(dp)))
 		return -EINVAL;
 
 	device_set_wakeup_enable(dp, wol->wolopts & WAKE_MAGIC);
 
 	spin_lock_bh(&tp->lock);
 	if (device_may_wakeup(dp))
-		tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
+		tg3_flag_set(tp, WOL_ENABLE);
 	else
-		tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE;
+		tg3_flag_clear(tp, WOL_ENABLE);
 	spin_unlock_bh(&tp->lock);
 
-
 	return 0;
 }
 
@@ -9997,33 +10066,6 @@ static void tg3_set_msglevel(struct net_device *dev, u32 value)
 	tp->msg_enable = value;
 }
 
-static int tg3_set_tso(struct net_device *dev, u32 value)
-{
-	struct tg3 *tp = netdev_priv(dev);
-
-	if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
-		if (value)
-			return -EINVAL;
-		return 0;
-	}
-	if ((dev->features & NETIF_F_IPV6_CSUM) &&
-	    ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) ||
-	     (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3))) {
-		if (value) {
-			dev->features |= NETIF_F_TSO6;
-			if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
-			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
-			    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
-			     GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
-			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
-			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
-				dev->features |= NETIF_F_TSO_ECN;
-		} else
-			dev->features &= ~(NETIF_F_TSO6 | NETIF_F_TSO_ECN);
-	}
-	return ethtool_op_set_tso(dev, value);
-}
-
 static int tg3_nway_reset(struct net_device *dev)
 {
 	struct tg3 *tp = netdev_priv(dev);
@@ -10035,7 +10077,7 @@ static int tg3_nway_reset(struct net_device *dev)
 	if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
 		return -EINVAL;
 
-	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+	if (tg3_flag(tp, USE_PHYLIB)) {
 		if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
 			return -EAGAIN;
 		r = phy_start_aneg(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
@@ -10064,7 +10106,7 @@ static void tg3_get_ringparam(struct net_device *dev, struct ethtool_ringparam *
 
 	ering->rx_max_pending = tp->rx_std_ring_mask;
 	ering->rx_mini_max_pending = 0;
-	if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE)
+	if (tg3_flag(tp, JUMBO_RING_ENABLE))
 		ering->rx_jumbo_max_pending = tp->rx_jmb_ring_mask;
 	else
 		ering->rx_jumbo_max_pending = 0;
@@ -10073,7 +10115,7 @@ static void tg3_get_ringparam(struct net_device *dev, struct ethtool_ringparam *
 
 	ering->rx_pending = tp->rx_pending;
 	ering->rx_mini_pending = 0;
-	if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE)
+	if (tg3_flag(tp, JUMBO_RING_ENABLE))
 		ering->rx_jumbo_pending = tp->rx_jumbo_pending;
 	else
 		ering->rx_jumbo_pending = 0;
@@ -10090,7 +10132,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
 	    (ering->rx_jumbo_pending > tp->rx_jmb_ring_mask) ||
 	    (ering->tx_pending > TG3_TX_RING_SIZE - 1) ||
 	    (ering->tx_pending <= MAX_SKB_FRAGS) ||
-	    ((tp->tg3_flags2 & TG3_FLG2_TSO_BUG) &&
+	    (tg3_flag(tp, TSO_BUG) &&
 	     (ering->tx_pending <= (MAX_SKB_FRAGS * 3))))
 		return -EINVAL;
 
@@ -10104,7 +10146,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
 
 	tp->rx_pending = ering->rx_pending;
 
-	if ((tp->tg3_flags2 & TG3_FLG2_MAX_RXPEND_64) &&
+	if (tg3_flag(tp, MAX_RXPEND_64) &&
 	    tp->rx_pending > 63)
 		tp->rx_pending = 63;
 	tp->rx_jumbo_pending = ering->rx_jumbo_pending;
@@ -10131,7 +10173,7 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 {
 	struct tg3 *tp = netdev_priv(dev);
 
-	epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;
+	epause->autoneg = !!tg3_flag(tp, PAUSE_AUTONEG);
 
 	if (tp->link_config.active_flowctrl & FLOW_CTRL_RX)
 		epause->rx_pause = 1;
@@ -10149,7 +10191,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 	struct tg3 *tp = netdev_priv(dev);
 	int err = 0;
 
-	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+	if (tg3_flag(tp, USE_PHYLIB)) {
 		u32 newadv;
 		struct phy_device *phydev;
 
@@ -10177,9 +10219,9 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 			newadv = 0;
 
 		if (epause->autoneg)
-			tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+			tg3_flag_set(tp, PAUSE_AUTONEG);
 		else
-			tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
+			tg3_flag_clear(tp, PAUSE_AUTONEG);
 
 		if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
 			u32 oldadv = phydev->advertising &
@@ -10221,9 +10263,9 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 		tg3_full_lock(tp, irq_sync);
 
 		if (epause->autoneg)
-			tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+			tg3_flag_set(tp, PAUSE_AUTONEG);
 		else
-			tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
+			tg3_flag_clear(tp, PAUSE_AUTONEG);
 		if (epause->rx_pause)
 			tp->link_config.flowctrl |= FLOW_CTRL_RX;
 		else
@@ -10246,50 +10288,6 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 	return err;
 }
 
-static u32 tg3_get_rx_csum(struct net_device *dev)
-{
-	struct tg3 *tp = netdev_priv(dev);
-	return (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0;
-}
-
-static int tg3_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct tg3 *tp = netdev_priv(dev);
-
-	if (tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) {
-		if (data != 0)
-			return -EINVAL;
-		return 0;
-	}
-
-	spin_lock_bh(&tp->lock);
-	if (data)
-		tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
-	else
-		tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
-	spin_unlock_bh(&tp->lock);
-
-	return 0;
-}
-
-static int tg3_set_tx_csum(struct net_device *dev, u32 data)
-{
-	struct tg3 *tp = netdev_priv(dev);
-
-	if (tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) {
-		if (data != 0)
-			return -EINVAL;
-		return 0;
-	}
-
-	if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
-		ethtool_op_set_tx_ipv6_csum(dev, data);
-	else
-		ethtool_op_set_tx_csum(dev, data);
-
-	return 0;
-}
-
 static int tg3_get_sset_count(struct net_device *dev, int sset)
 {
 	switch (sset) {
@@ -10317,35 +10315,38 @@ static void tg3_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 	}
 }
 
-static int tg3_phys_id(struct net_device *dev, u32 data)
+static int tg3_set_phys_id(struct net_device *dev,
+			    enum ethtool_phys_id_state state)
 {
 	struct tg3 *tp = netdev_priv(dev);
-	int i;
 
 	if (!netif_running(tp->dev))
 		return -EAGAIN;
 
-	if (data == 0)
-		data = UINT_MAX / 2;
-
-	for (i = 0; i < (data * 2); i++) {
-		if ((i % 2) == 0)
-			tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
-					   LED_CTRL_1000MBPS_ON |
-					   LED_CTRL_100MBPS_ON |
-					   LED_CTRL_10MBPS_ON |
-					   LED_CTRL_TRAFFIC_OVERRIDE |
-					   LED_CTRL_TRAFFIC_BLINK |
-					   LED_CTRL_TRAFFIC_LED);
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 1;	/* cycle on/off once per second */
+
+	case ETHTOOL_ID_ON:
+		tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
+		     LED_CTRL_1000MBPS_ON |
+		     LED_CTRL_100MBPS_ON |
+		     LED_CTRL_10MBPS_ON |
+		     LED_CTRL_TRAFFIC_OVERRIDE |
+		     LED_CTRL_TRAFFIC_BLINK |
+		     LED_CTRL_TRAFFIC_LED);
+		break;
 
-		else
-			tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
-					   LED_CTRL_TRAFFIC_OVERRIDE);
+	case ETHTOOL_ID_OFF:
+		tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
+		     LED_CTRL_TRAFFIC_OVERRIDE);
+		break;
 
-		if (msleep_interruptible(500))
-			break;
+	case ETHTOOL_ID_INACTIVE:
+		tw32(MAC_LED_CTRL, tp->led_ctrl);
+		break;
 	}
-	tw32(MAC_LED_CTRL, tp->led_ctrl);
+
 	return 0;
 }
 
@@ -10356,6 +10357,80 @@ static void tg3_get_ethtool_stats(struct net_device *dev,
 	memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats));
 }
 
+static __be32 * tg3_vpd_readblock(struct tg3 *tp)
+{
+	int i;
+	__be32 *buf;
+	u32 offset = 0, len = 0;
+	u32 magic, val;
+
+	if (tg3_flag(tp, NO_NVRAM) || tg3_nvram_read(tp, 0, &magic))
+		return NULL;
+
+	if (magic == TG3_EEPROM_MAGIC) {
+		for (offset = TG3_NVM_DIR_START;
+		     offset < TG3_NVM_DIR_END;
+		     offset += TG3_NVM_DIRENT_SIZE) {
+			if (tg3_nvram_read(tp, offset, &val))
+				return NULL;
+
+			if ((val >> TG3_NVM_DIRTYPE_SHIFT) ==
+			    TG3_NVM_DIRTYPE_EXTVPD)
+				break;
+		}
+
+		if (offset != TG3_NVM_DIR_END) {
+			len = (val & TG3_NVM_DIRTYPE_LENMSK) * 4;
+			if (tg3_nvram_read(tp, offset + 4, &offset))
+				return NULL;
+
+			offset = tg3_nvram_logical_addr(tp, offset);
+		}
+	}
+
+	if (!offset || !len) {
+		offset = TG3_NVM_VPD_OFF;
+		len = TG3_NVM_VPD_LEN;
+	}
+
+	buf = kmalloc(len, GFP_KERNEL);
+	if (buf == NULL)
+		return NULL;
+
+	if (magic == TG3_EEPROM_MAGIC) {
+		for (i = 0; i < len; i += 4) {
+			/* The data is in little-endian format in NVRAM.
+			 * Use the big-endian read routines to preserve
+			 * the byte order as it exists in NVRAM.
+			 */
+			if (tg3_nvram_read_be32(tp, offset + i, &buf[i/4]))
+				goto error;
+		}
+	} else {
+		u8 *ptr;
+		ssize_t cnt;
+		unsigned int pos = 0;
+
+		ptr = (u8 *)&buf[0];
+		for (i = 0; pos < len && i < 3; i++, pos += cnt, ptr += cnt) {
+			cnt = pci_read_vpd(tp->pdev, pos,
+					   len - pos, ptr);
+			if (cnt == -ETIMEDOUT || cnt == -EINTR)
+				cnt = 0;
+			else if (cnt < 0)
+				goto error;
+		}
+		if (pos != len)
+			goto error;
+	}
+
+	return buf;
+
+error:
+	kfree(buf);
+	return NULL;
+}
+
 #define NVRAM_TEST_SIZE 0x100
 #define NVRAM_SELFBOOT_FORMAT1_0_SIZE	0x14
 #define NVRAM_SELFBOOT_FORMAT1_2_SIZE	0x18
@@ -10369,7 +10444,7 @@ static int tg3_test_nvram(struct tg3 *tp)
 	__be32 *buf;
 	int i, j, k, err = 0, size;
 
-	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+	if (tg3_flag(tp, NO_NVRAM))
 		return 0;
 
 	if (tg3_nvram_read(tp, 0, &magic) != 0)
@@ -10495,14 +10570,11 @@ static int tg3_test_nvram(struct tg3 *tp)
 	if (csum != le32_to_cpu(buf[0xfc/4]))
 		goto out;
 
-	for (i = 0; i < TG3_NVM_VPD_LEN; i += 4) {
-		/* The data is in little-endian format in NVRAM.
-		 * Use the big-endian read routines to preserve
-		 * the byte order as it exists in NVRAM.
-		 */
-		if (tg3_nvram_read_be32(tp, TG3_NVM_VPD_OFF + i, &buf[i/4]))
-			goto out;
-	}
+	kfree(buf);
+
+	buf = tg3_vpd_readblock(tp);
+	if (!buf)
+		return -ENOMEM;
 
 	i = pci_vpd_find_tag((u8 *)buf, 0, TG3_NVM_VPD_LEN,
 			     PCI_VPD_LRDT_RO_DATA);
@@ -10714,9 +10786,9 @@ static int tg3_test_registers(struct tg3 *tp)
 	};
 
 	is_5705 = is_5750 = 0;
-	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+	if (tg3_flag(tp, 5705_PLUS)) {
 		is_5705 = 1;
-		if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
+		if (tg3_flag(tp, 5750_PLUS))
 			is_5750 = 1;
 	}
 
@@ -10727,7 +10799,7 @@ static int tg3_test_registers(struct tg3 *tp)
 		if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705))
 			continue;
 
-		if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
+		if (tg3_flag(tp, IS_5788) &&
 		    (reg_tbl[i].flags & TG3_FL_NOT_5788))
 			continue;
 
@@ -10850,16 +10922,15 @@ static int tg3_test_memory(struct tg3 *tp)
 	int err = 0;
 	int i;
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+	if (tg3_flag(tp, 5717_PLUS))
 		mem_tbl = mem_tbl_5717;
 	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		mem_tbl = mem_tbl_57765;
-	else if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
+	else if (tg3_flag(tp, 5755_PLUS))
 		mem_tbl = mem_tbl_5755;
 	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		mem_tbl = mem_tbl_5906;
-	else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+	else if (tg3_flag(tp, 5705_PLUS))
 		mem_tbl = mem_tbl_5705;
 	else
 		mem_tbl = mem_tbl_570x;
@@ -10875,11 +10946,35 @@ static int tg3_test_memory(struct tg3 *tp)
 
 #define TG3_MAC_LOOPBACK	0
 #define TG3_PHY_LOOPBACK	1
+#define TG3_TSO_LOOPBACK	2
+
+#define TG3_TSO_MSS		500
+
+#define TG3_TSO_IP_HDR_LEN	20
+#define TG3_TSO_TCP_HDR_LEN	20
+#define TG3_TSO_TCP_OPT_LEN	12
+
+static const u8 tg3_tso_header[] = {
+0x08, 0x00,
+0x45, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x40, 0x00,
+0x40, 0x06, 0x00, 0x00,
+0x0a, 0x00, 0x00, 0x01,
+0x0a, 0x00, 0x00, 0x02,
+0x0d, 0x00, 0xe0, 0x00,
+0x00, 0x00, 0x01, 0x00,
+0x00, 0x00, 0x02, 0x00,
+0x80, 0x10, 0x10, 0x00,
+0x14, 0x09, 0x00, 0x00,
+0x01, 0x01, 0x08, 0x0a,
+0x11, 0x11, 0x11, 0x11,
+0x11, 0x11, 0x11, 0x11,
+};
 
-static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
+static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, int loopback_mode)
 {
 	u32 mac_mode, rx_start_idx, rx_idx, tx_idx, opaque_key;
-	u32 desc_idx, coal_now;
+	u32 base_flags = 0, mss = 0, desc_idx, coal_now, data_off, val;
 	struct sk_buff *skb, *rx_skb;
 	u8 *tx_data;
 	dma_addr_t map;
@@ -10891,9 +10986,9 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 	tnapi = &tp->napi[0];
 	rnapi = &tp->napi[0];
 	if (tp->irq_cnt > 1) {
-		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)
+		if (tg3_flag(tp, ENABLE_RSS))
 			rnapi = &tp->napi[1];
-		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+		if (tg3_flag(tp, ENABLE_TSS))
 			tnapi = &tp->napi[1];
 	}
 	coal_now = tnapi->coal_now | rnapi->coal_now;
@@ -10905,22 +11000,20 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 		 * all newer ASIC revisions.
 		 */
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
-		    (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT))
+		    tg3_flag(tp, CPMU_PRESENT))
 			return 0;
 
 		mac_mode = tp->mac_mode &
 			   ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
 		mac_mode |= MAC_MODE_PORT_INT_LPBACK;
-		if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+		if (!tg3_flag(tp, 5705_PLUS))
 			mac_mode |= MAC_MODE_LINK_POLARITY;
 		if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
 			mac_mode |= MAC_MODE_PORT_MODE_MII;
 		else
 			mac_mode |= MAC_MODE_PORT_MODE_GMII;
 		tw32(MAC_MODE, mac_mode);
-	} else if (loopback_mode == TG3_PHY_LOOPBACK) {
-		u32 val;
-
+	} else {
 		if (tp->phy_flags & TG3_PHYFLG_IS_FET) {
 			tg3_phy_fet_toggle_apd(tp, false);
 			val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
@@ -10968,13 +11061,11 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 				break;
 			mdelay(1);
 		}
-	} else {
-		return -EINVAL;
 	}
 
 	err = -EIO;
 
-	tx_len = 1514;
+	tx_len = pktsz;
 	skb = netdev_alloc_skb(tp->dev, tx_len);
 	if (!skb)
 		return -ENOMEM;
@@ -10983,9 +11074,58 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 	memcpy(tx_data, tp->dev->dev_addr, 6);
 	memset(tx_data + 6, 0x0, 8);
 
-	tw32(MAC_RX_MTU_SIZE, tx_len + 4);
+	tw32(MAC_RX_MTU_SIZE, tx_len + ETH_FCS_LEN);
+
+	if (loopback_mode == TG3_TSO_LOOPBACK) {
+		struct iphdr *iph = (struct iphdr *)&tx_data[ETH_HLEN];
 
-	for (i = 14; i < tx_len; i++)
+		u32 hdr_len = TG3_TSO_IP_HDR_LEN + TG3_TSO_TCP_HDR_LEN +
+			      TG3_TSO_TCP_OPT_LEN;
+
+		memcpy(tx_data + ETH_ALEN * 2, tg3_tso_header,
+		       sizeof(tg3_tso_header));
+		mss = TG3_TSO_MSS;
+
+		val = tx_len - ETH_ALEN * 2 - sizeof(tg3_tso_header);
+		num_pkts = DIV_ROUND_UP(val, TG3_TSO_MSS);
+
+		/* Set the total length field in the IP header */
+		iph->tot_len = htons((u16)(mss + hdr_len));
+
+		base_flags = (TXD_FLAG_CPU_PRE_DMA |
+			      TXD_FLAG_CPU_POST_DMA);
+
+		if (tg3_flag(tp, HW_TSO_1) ||
+		    tg3_flag(tp, HW_TSO_2) ||
+		    tg3_flag(tp, HW_TSO_3)) {
+			struct tcphdr *th;
+			val = ETH_HLEN + TG3_TSO_IP_HDR_LEN;
+			th = (struct tcphdr *)&tx_data[val];
+			th->check = 0;
+		} else
+			base_flags |= TXD_FLAG_TCPUDP_CSUM;
+
+		if (tg3_flag(tp, HW_TSO_3)) {
+			mss |= (hdr_len & 0xc) << 12;
+			if (hdr_len & 0x10)
+				base_flags |= 0x00000010;
+			base_flags |= (hdr_len & 0x3e0) << 5;
+		} else if (tg3_flag(tp, HW_TSO_2))
+			mss |= hdr_len << 9;
+		else if (tg3_flag(tp, HW_TSO_1) ||
+			 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
+			mss |= (TG3_TSO_TCP_OPT_LEN << 9);
+		} else {
+			base_flags |= (TG3_TSO_TCP_OPT_LEN << 10);
+		}
+
+		data_off = ETH_ALEN * 2 + sizeof(tg3_tso_header);
+	} else {
+		num_pkts = 1;
+		data_off = ETH_HLEN;
+	}
+
+	for (i = data_off; i < tx_len; i++)
 		tx_data[i] = (u8) (i & 0xff);
 
 	map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE);
@@ -11001,12 +11141,10 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 
 	rx_start_idx = rnapi->hw_status->idx[0].rx_producer;
 
-	num_pkts = 0;
-
-	tg3_set_txd(tnapi, tnapi->tx_prod, map, tx_len, 0, 1);
+	tg3_set_txd(tnapi, tnapi->tx_prod, map, tx_len,
+		    base_flags, (mss << 1) | 1);
 
 	tnapi->tx_prod++;
-	num_pkts++;
 
 	tw32_tx_mbox(tnapi->prodmbox, tnapi->tx_prod);
 	tr32_mailbox(tnapi->prodmbox);
@@ -11036,29 +11174,56 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 	if (rx_idx != rx_start_idx + num_pkts)
 		goto out;
 
-	desc = &rnapi->rx_rcb[rx_start_idx];
-	desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
-	opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
-	if (opaque_key != RXD_OPAQUE_RING_STD)
-		goto out;
+	val = data_off;
+	while (rx_idx != rx_start_idx) {
+		desc = &rnapi->rx_rcb[rx_start_idx++];
+		desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
+		opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
 
-	if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
-	    (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII))
-		goto out;
+		if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
+		    (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII))
+			goto out;
 
-	rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4;
-	if (rx_len != tx_len)
-		goto out;
+		rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT)
+			 - ETH_FCS_LEN;
 
-	rx_skb = tpr->rx_std_buffers[desc_idx].skb;
+		if (loopback_mode != TG3_TSO_LOOPBACK) {
+			if (rx_len != tx_len)
+				goto out;
 
-	map = dma_unmap_addr(&tpr->rx_std_buffers[desc_idx], mapping);
-	pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE);
+			if (pktsz <= TG3_RX_STD_DMA_SZ - ETH_FCS_LEN) {
+				if (opaque_key != RXD_OPAQUE_RING_STD)
+					goto out;
+			} else {
+				if (opaque_key != RXD_OPAQUE_RING_JUMBO)
+					goto out;
+			}
+		} else if ((desc->type_flags & RXD_FLAG_TCPUDP_CSUM) &&
+			   (desc->ip_tcp_csum & RXD_TCPCSUM_MASK)
+			    >> RXD_TCPCSUM_SHIFT != 0xffff) {
+			goto out;
+		}
 
-	for (i = 14; i < tx_len; i++) {
-		if (*(rx_skb->data + i) != (u8) (i & 0xff))
+		if (opaque_key == RXD_OPAQUE_RING_STD) {
+			rx_skb = tpr->rx_std_buffers[desc_idx].skb;
+			map = dma_unmap_addr(&tpr->rx_std_buffers[desc_idx],
+					     mapping);
+		} else if (opaque_key == RXD_OPAQUE_RING_JUMBO) {
+			rx_skb = tpr->rx_jmb_buffers[desc_idx].skb;
+			map = dma_unmap_addr(&tpr->rx_jmb_buffers[desc_idx],
+					     mapping);
+		} else
 			goto out;
+
+		pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len,
+					    PCI_DMA_FROMDEVICE);
+
+		for (i = data_off; i < rx_len; i++, val++) {
+			if (*(rx_skb->data + i) != (u8) (val & 0xff))
+				goto out;
+		}
 	}
+
 	err = 0;
 
 	/* tg3_free_rings will unmap and free the rx_skb */
@@ -11066,10 +11231,13 @@ out:
 	return err;
 }
 
-#define TG3_MAC_LOOPBACK_FAILED		1
-#define TG3_PHY_LOOPBACK_FAILED		2
-#define TG3_LOOPBACK_FAILED		(TG3_MAC_LOOPBACK_FAILED |	\
-					 TG3_PHY_LOOPBACK_FAILED)
+#define TG3_STD_LOOPBACK_FAILED		1
+#define TG3_JMB_LOOPBACK_FAILED		2
+#define TG3_TSO_LOOPBACK_FAILED		4
+
+#define TG3_MAC_LOOPBACK_SHIFT		0
+#define TG3_PHY_LOOPBACK_SHIFT		4
+#define TG3_LOOPBACK_FAILED		0x00000077
 
 static int tg3_test_loopback(struct tg3 *tp)
 {
@@ -11088,11 +11256,20 @@ static int tg3_test_loopback(struct tg3 *tp)
 		goto done;
 	}
 
+	if (tg3_flag(tp, ENABLE_RSS)) {
+		int i;
+
+		/* Reroute all rx packets to the 1st queue */
+		for (i = MAC_RSS_INDIR_TBL_0;
+		     i < MAC_RSS_INDIR_TBL_0 + TG3_RSS_INDIR_TBL_SIZE; i += 4)
+			tw32(i, 0x0);
+	}
+
 	/* Turn off gphy autopowerdown. */
 	if (tp->phy_flags & TG3_PHYFLG_ENABLE_APD)
 		tg3_phy_toggle_apd(tp, false);
 
-	if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) {
+	if (tg3_flag(tp, CPMU_PRESENT)) {
 		int i;
 		u32 status;
 
@@ -11118,10 +11295,14 @@ static int tg3_test_loopback(struct tg3 *tp)
 				  CPMU_CTRL_LINK_AWARE_MODE));
 	}
 
-	if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
-		err |= TG3_MAC_LOOPBACK_FAILED;
+	if (tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_MAC_LOOPBACK))
+		err |= TG3_STD_LOOPBACK_FAILED << TG3_MAC_LOOPBACK_SHIFT;
 
-	if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) {
+	if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
+	    tg3_run_loopback(tp, 9000 + ETH_HLEN, TG3_MAC_LOOPBACK))
+		err |= TG3_JMB_LOOPBACK_FAILED << TG3_MAC_LOOPBACK_SHIFT;
+
+	if (tg3_flag(tp, CPMU_PRESENT)) {
 		tw32(TG3_CPMU_CTRL, cpmuctrl);
 
 		/* Release the mutex */
@@ -11129,9 +11310,18 @@ static int tg3_test_loopback(struct tg3 *tp)
 	}
 
 	if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
-	    !(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
-		if (tg3_run_loopback(tp, TG3_PHY_LOOPBACK))
-			err |= TG3_PHY_LOOPBACK_FAILED;
+	    !tg3_flag(tp, USE_PHYLIB)) {
+		if (tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_PHY_LOOPBACK))
+			err |= TG3_STD_LOOPBACK_FAILED <<
+			       TG3_PHY_LOOPBACK_SHIFT;
+		if (tg3_flag(tp, TSO_CAPABLE) &&
+		    tg3_run_loopback(tp, ETH_FRAME_LEN, TG3_TSO_LOOPBACK))
+			err |= TG3_TSO_LOOPBACK_FAILED <<
+			       TG3_PHY_LOOPBACK_SHIFT;
+		if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
+		    tg3_run_loopback(tp, 9000 + ETH_HLEN, TG3_PHY_LOOPBACK))
+			err |= TG3_JMB_LOOPBACK_FAILED <<
+			       TG3_PHY_LOOPBACK_SHIFT;
 	}
 
 	/* Re-enable gphy autopowerdown. */
@@ -11176,7 +11366,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 		tg3_halt(tp, RESET_KIND_SUSPEND, 1);
 		err = tg3_nvram_lock(tp);
 		tg3_halt_cpu(tp, RX_CPU_BASE);
-		if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+		if (!tg3_flag(tp, 5705_PLUS))
 			tg3_halt_cpu(tp, TX_CPU_BASE);
 		if (!err)
 			tg3_nvram_unlock(tp);
@@ -11206,7 +11396,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		if (netif_running(dev)) {
-			tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+			tg3_flag_set(tp, INIT_COMPLETE);
 			err2 = tg3_restart_hw(tp, 1);
 			if (!err2)
 				tg3_netif_start(tp);
@@ -11228,7 +11418,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	struct tg3 *tp = netdev_priv(dev);
 	int err;
 
-	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+	if (tg3_flag(tp, USE_PHYLIB)) {
 		struct phy_device *phydev;
 		if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
 			return -EAGAIN;
@@ -11247,9 +11437,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
 			break;			/* We have no PHY */
 
-		if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) ||
-		    ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
-		     !netif_running(dev)))
+		if (!netif_running(dev))
 			return -EAGAIN;
 
 		spin_lock_bh(&tp->lock);
@@ -11265,9 +11453,7 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
 			break;			/* We have no PHY */
 
-		if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) ||
-		    ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
-		     !netif_running(dev)))
+		if (!netif_running(dev))
 			return -EAGAIN;
 
 		spin_lock_bh(&tp->lock);
@@ -11297,7 +11483,7 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)
 	u32 max_rxcoal_tick_int = 0, max_txcoal_tick_int = 0;
 	u32 max_stat_coal_ticks = 0, min_stat_coal_ticks = 0;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+	if (!tg3_flag(tp, 5705_PLUS)) {
 		max_rxcoal_tick_int = MAX_RXCOAL_TICK_INT;
 		max_txcoal_tick_int = MAX_TXCOAL_TICK_INT;
 		max_stat_coal_ticks = MAX_STAT_COAL_TICKS;
@@ -11364,14 +11550,9 @@ static const struct ethtool_ops tg3_ethtool_ops = {
 	.set_ringparam		= tg3_set_ringparam,
 	.get_pauseparam		= tg3_get_pauseparam,
 	.set_pauseparam		= tg3_set_pauseparam,
-	.get_rx_csum		= tg3_get_rx_csum,
-	.set_rx_csum		= tg3_set_rx_csum,
-	.set_tx_csum		= tg3_set_tx_csum,
-	.set_sg			= ethtool_op_set_sg,
-	.set_tso		= tg3_set_tso,
 	.self_test		= tg3_self_test,
 	.get_strings		= tg3_get_strings,
-	.phys_id		= tg3_phys_id,
+	.set_phys_id		= tg3_set_phys_id,
 	.get_ethtool_stats	= tg3_get_ethtool_stats,
 	.get_coalesce		= tg3_get_coalesce,
 	.set_coalesce		= tg3_set_coalesce,
@@ -11416,8 +11597,7 @@ static void __devinit tg3_get_nvram_size(struct tg3 *tp)
 {
 	u32 val;
 
-	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
-	    tg3_nvram_read(tp, 0, &val) != 0)
+	if (tg3_flag(tp, NO_NVRAM) || tg3_nvram_read(tp, 0, &val) != 0)
 		return;
 
 	/* Selfboot format */
@@ -11452,19 +11632,19 @@ static void __devinit tg3_get_nvram_info(struct tg3 *tp)
 
 	nvcfg1 = tr32(NVRAM_CFG1);
 	if (nvcfg1 & NVRAM_CFG1_FLASHIF_ENAB) {
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, FLASH);
 	} else {
 		nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
 		tw32(NVRAM_CFG1, nvcfg1);
 	}
 
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
-	    (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
+	    tg3_flag(tp, 5780_CLASS)) {
 		switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
 		case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
 			tp->nvram_jedecnum = JEDEC_ATMEL;
 			tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
-			tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+			tg3_flag_set(tp, NVRAM_BUFFERED);
 			break;
 		case FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED:
 			tp->nvram_jedecnum = JEDEC_ATMEL;
@@ -11473,12 +11653,12 @@ static void __devinit tg3_get_nvram_info(struct tg3 *tp)
 		case FLASH_VENDOR_ATMEL_EEPROM:
 			tp->nvram_jedecnum = JEDEC_ATMEL;
 			tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
-			tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+			tg3_flag_set(tp, NVRAM_BUFFERED);
 			break;
 		case FLASH_VENDOR_ST:
 			tp->nvram_jedecnum = JEDEC_ST;
 			tp->nvram_pagesize = ST_M45PEX0_PAGE_SIZE;
-			tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+			tg3_flag_set(tp, NVRAM_BUFFERED);
 			break;
 		case FLASH_VENDOR_SAIFUN:
 			tp->nvram_jedecnum = JEDEC_SAIFUN;
@@ -11493,7 +11673,7 @@ static void __devinit tg3_get_nvram_info(struct tg3 *tp)
 	} else {
 		tp->nvram_jedecnum = JEDEC_ATMEL;
 		tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
 	}
 }
 
@@ -11532,29 +11712,29 @@ static void __devinit tg3_get_5752_nvram_info(struct tg3 *tp)
 
 	/* NVRAM protection for TPM */
 	if (nvcfg1 & (1 << 27))
-		tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
+		tg3_flag_set(tp, PROTECTED_NVRAM);
 
 	switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
 	case FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ:
 	case FLASH_5752VENDOR_ATMEL_EEPROM_376KHZ:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
 		break;
 	case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 		break;
 	case FLASH_5752VENDOR_ST_M45PE10:
 	case FLASH_5752VENDOR_ST_M45PE20:
 	case FLASH_5752VENDOR_ST_M45PE40:
 		tp->nvram_jedecnum = JEDEC_ST;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 		break;
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_FLASH) {
+	if (tg3_flag(tp, FLASH)) {
 		tg3_nvram_get_pagesize(tp, nvcfg1);
 	} else {
 		/* For eeprom, set pagesize to maximum eeprom size */
@@ -11573,7 +11753,7 @@ static void __devinit tg3_get_5755_nvram_info(struct tg3 *tp)
 
 	/* NVRAM protection for TPM */
 	if (nvcfg1 & (1 << 27)) {
-		tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
+		tg3_flag_set(tp, PROTECTED_NVRAM);
 		protect = 1;
 	}
 
@@ -11584,8 +11764,8 @@ static void __devinit tg3_get_5755_nvram_info(struct tg3 *tp)
 	case FLASH_5755VENDOR_ATMEL_FLASH_3:
 	case FLASH_5755VENDOR_ATMEL_FLASH_5:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 		tp->nvram_pagesize = 264;
 		if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1 ||
 		    nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_5)
@@ -11602,8 +11782,8 @@ static void __devinit tg3_get_5755_nvram_info(struct tg3 *tp)
 	case FLASH_5752VENDOR_ST_M45PE20:
 	case FLASH_5752VENDOR_ST_M45PE40:
 		tp->nvram_jedecnum = JEDEC_ST;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 		tp->nvram_pagesize = 256;
 		if (nvcfg1 == FLASH_5752VENDOR_ST_M45PE10)
 			tp->nvram_size = (protect ?
@@ -11633,7 +11813,7 @@ static void __devinit tg3_get_5787_nvram_info(struct tg3 *tp)
 	case FLASH_5787VENDOR_MICRO_EEPROM_64KHZ:
 	case FLASH_5787VENDOR_MICRO_EEPROM_376KHZ:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
 		tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
 
 		nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
@@ -11644,16 +11824,16 @@ static void __devinit tg3_get_5787_nvram_info(struct tg3 *tp)
 	case FLASH_5755VENDOR_ATMEL_FLASH_2:
 	case FLASH_5755VENDOR_ATMEL_FLASH_3:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 		tp->nvram_pagesize = 264;
 		break;
 	case FLASH_5752VENDOR_ST_M45PE10:
 	case FLASH_5752VENDOR_ST_M45PE20:
 	case FLASH_5752VENDOR_ST_M45PE40:
 		tp->nvram_jedecnum = JEDEC_ST;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 		tp->nvram_pagesize = 256;
 		break;
 	}
@@ -11667,7 +11847,7 @@ static void __devinit tg3_get_5761_nvram_info(struct tg3 *tp)
 
 	/* NVRAM protection for TPM */
 	if (nvcfg1 & (1 << 27)) {
-		tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
+		tg3_flag_set(tp, PROTECTED_NVRAM);
 		protect = 1;
 	}
 
@@ -11682,9 +11862,9 @@ static void __devinit tg3_get_5761_nvram_info(struct tg3 *tp)
 	case FLASH_5761VENDOR_ATMEL_MDB081D:
 	case FLASH_5761VENDOR_ATMEL_MDB161D:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
-		tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
+		tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS);
 		tp->nvram_pagesize = 256;
 		break;
 	case FLASH_5761VENDOR_ST_A_M45PE20:
@@ -11696,8 +11876,8 @@ static void __devinit tg3_get_5761_nvram_info(struct tg3 *tp)
 	case FLASH_5761VENDOR_ST_M_M45PE80:
 	case FLASH_5761VENDOR_ST_M_M45PE16:
 		tp->nvram_jedecnum = JEDEC_ST;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 		tp->nvram_pagesize = 256;
 		break;
 	}
@@ -11737,7 +11917,7 @@ static void __devinit tg3_get_5761_nvram_info(struct tg3 *tp)
 static void __devinit tg3_get_5906_nvram_info(struct tg3 *tp)
 {
 	tp->nvram_jedecnum = JEDEC_ATMEL;
-	tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+	tg3_flag_set(tp, NVRAM_BUFFERED);
 	tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
 }
 
@@ -11751,7 +11931,7 @@ static void __devinit tg3_get_57780_nvram_info(struct tg3 *tp)
 	case FLASH_5787VENDOR_ATMEL_EEPROM_376KHZ:
 	case FLASH_5787VENDOR_MICRO_EEPROM_376KHZ:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
 		tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
 
 		nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
@@ -11765,8 +11945,8 @@ static void __devinit tg3_get_57780_nvram_info(struct tg3 *tp)
 	case FLASH_57780VENDOR_ATMEL_AT45DB041D:
 	case FLASH_57780VENDOR_ATMEL_AT45DB041B:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 
 		switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
 		case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
@@ -11788,8 +11968,8 @@ static void __devinit tg3_get_57780_nvram_info(struct tg3 *tp)
 	case FLASH_5752VENDOR_ST_M45PE20:
 	case FLASH_5752VENDOR_ST_M45PE40:
 		tp->nvram_jedecnum = JEDEC_ST;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 
 		switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
 		case FLASH_5752VENDOR_ST_M45PE10:
@@ -11804,13 +11984,13 @@ static void __devinit tg3_get_57780_nvram_info(struct tg3 *tp)
 		}
 		break;
 	default:
-		tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM;
+		tg3_flag_set(tp, NO_NVRAM);
 		return;
 	}
 
 	tg3_nvram_get_pagesize(tp, nvcfg1);
 	if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528)
-		tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
+		tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS);
 }
 
 
@@ -11824,7 +12004,7 @@ static void __devinit tg3_get_5717_nvram_info(struct tg3 *tp)
 	case FLASH_5717VENDOR_ATMEL_EEPROM:
 	case FLASH_5717VENDOR_MICRO_EEPROM:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
 		tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
 
 		nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
@@ -11838,11 +12018,13 @@ static void __devinit tg3_get_5717_nvram_info(struct tg3 *tp)
 	case FLASH_5717VENDOR_ATMEL_ADB021D:
 	case FLASH_5717VENDOR_ATMEL_45USPT:
 		tp->nvram_jedecnum = JEDEC_ATMEL;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 
 		switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
 		case FLASH_5717VENDOR_ATMEL_MDB021D:
+			/* Detect size with tg3_nvram_get_size() */
+			break;
 		case FLASH_5717VENDOR_ATMEL_ADB021B:
 		case FLASH_5717VENDOR_ATMEL_ADB021D:
 			tp->nvram_size = TG3_NVRAM_SIZE_256KB;
@@ -11863,13 +12045,15 @@ static void __devinit tg3_get_5717_nvram_info(struct tg3 *tp)
 	case FLASH_5717VENDOR_ST_25USPT:
 	case FLASH_5717VENDOR_ST_45USPT:
 		tp->nvram_jedecnum = JEDEC_ST;
-		tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
-		tp->tg3_flags2 |= TG3_FLG2_FLASH;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
 
 		switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
 		case FLASH_5717VENDOR_ST_M_M25PE20:
-		case FLASH_5717VENDOR_ST_A_M25PE20:
 		case FLASH_5717VENDOR_ST_M_M45PE20:
+			/* Detect size with tg3_nvram_get_size() */
+			break;
+		case FLASH_5717VENDOR_ST_A_M25PE20:
 		case FLASH_5717VENDOR_ST_A_M45PE20:
 			tp->nvram_size = TG3_NVRAM_SIZE_256KB;
 			break;
@@ -11879,13 +12063,125 @@ static void __devinit tg3_get_5717_nvram_info(struct tg3 *tp)
 		}
 		break;
 	default:
-		tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM;
+		tg3_flag_set(tp, NO_NVRAM);
 		return;
 	}
 
 	tg3_nvram_get_pagesize(tp, nvcfg1);
 	if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528)
-		tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
+		tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS);
+}
+
+static void __devinit tg3_get_5720_nvram_info(struct tg3 *tp)
+{
+	u32 nvcfg1, nvmpinstrp;
+
+	nvcfg1 = tr32(NVRAM_CFG1);
+	nvmpinstrp = nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK;
+
+	switch (nvmpinstrp) {
+	case FLASH_5720_EEPROM_HD:
+	case FLASH_5720_EEPROM_LD:
+		tp->nvram_jedecnum = JEDEC_ATMEL;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+
+		nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
+		tw32(NVRAM_CFG1, nvcfg1);
+		if (nvmpinstrp == FLASH_5720_EEPROM_HD)
+			tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
+		else
+			tp->nvram_pagesize = ATMEL_AT24C02_CHIP_SIZE;
+		return;
+	case FLASH_5720VENDOR_M_ATMEL_DB011D:
+	case FLASH_5720VENDOR_A_ATMEL_DB011B:
+	case FLASH_5720VENDOR_A_ATMEL_DB011D:
+	case FLASH_5720VENDOR_M_ATMEL_DB021D:
+	case FLASH_5720VENDOR_A_ATMEL_DB021B:
+	case FLASH_5720VENDOR_A_ATMEL_DB021D:
+	case FLASH_5720VENDOR_M_ATMEL_DB041D:
+	case FLASH_5720VENDOR_A_ATMEL_DB041B:
+	case FLASH_5720VENDOR_A_ATMEL_DB041D:
+	case FLASH_5720VENDOR_M_ATMEL_DB081D:
+	case FLASH_5720VENDOR_A_ATMEL_DB081D:
+	case FLASH_5720VENDOR_ATMEL_45USPT:
+		tp->nvram_jedecnum = JEDEC_ATMEL;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
+
+		switch (nvmpinstrp) {
+		case FLASH_5720VENDOR_M_ATMEL_DB021D:
+		case FLASH_5720VENDOR_A_ATMEL_DB021B:
+		case FLASH_5720VENDOR_A_ATMEL_DB021D:
+			tp->nvram_size = TG3_NVRAM_SIZE_256KB;
+			break;
+		case FLASH_5720VENDOR_M_ATMEL_DB041D:
+		case FLASH_5720VENDOR_A_ATMEL_DB041B:
+		case FLASH_5720VENDOR_A_ATMEL_DB041D:
+			tp->nvram_size = TG3_NVRAM_SIZE_512KB;
+			break;
+		case FLASH_5720VENDOR_M_ATMEL_DB081D:
+		case FLASH_5720VENDOR_A_ATMEL_DB081D:
+			tp->nvram_size = TG3_NVRAM_SIZE_1MB;
+			break;
+		default:
+			tp->nvram_size = TG3_NVRAM_SIZE_128KB;
+			break;
+		}
+		break;
+	case FLASH_5720VENDOR_M_ST_M25PE10:
+	case FLASH_5720VENDOR_M_ST_M45PE10:
+	case FLASH_5720VENDOR_A_ST_M25PE10:
+	case FLASH_5720VENDOR_A_ST_M45PE10:
+	case FLASH_5720VENDOR_M_ST_M25PE20:
+	case FLASH_5720VENDOR_M_ST_M45PE20:
+	case FLASH_5720VENDOR_A_ST_M25PE20:
+	case FLASH_5720VENDOR_A_ST_M45PE20:
+	case FLASH_5720VENDOR_M_ST_M25PE40:
+	case FLASH_5720VENDOR_M_ST_M45PE40:
+	case FLASH_5720VENDOR_A_ST_M25PE40:
+	case FLASH_5720VENDOR_A_ST_M45PE40:
+	case FLASH_5720VENDOR_M_ST_M25PE80:
+	case FLASH_5720VENDOR_M_ST_M45PE80:
+	case FLASH_5720VENDOR_A_ST_M25PE80:
+	case FLASH_5720VENDOR_A_ST_M45PE80:
+	case FLASH_5720VENDOR_ST_25USPT:
+	case FLASH_5720VENDOR_ST_45USPT:
+		tp->nvram_jedecnum = JEDEC_ST;
+		tg3_flag_set(tp, NVRAM_BUFFERED);
+		tg3_flag_set(tp, FLASH);
+
+		switch (nvmpinstrp) {
+		case FLASH_5720VENDOR_M_ST_M25PE20:
+		case FLASH_5720VENDOR_M_ST_M45PE20:
+		case FLASH_5720VENDOR_A_ST_M25PE20:
+		case FLASH_5720VENDOR_A_ST_M45PE20:
+			tp->nvram_size = TG3_NVRAM_SIZE_256KB;
+			break;
+		case FLASH_5720VENDOR_M_ST_M25PE40:
+		case FLASH_5720VENDOR_M_ST_M45PE40:
+		case FLASH_5720VENDOR_A_ST_M25PE40:
+		case FLASH_5720VENDOR_A_ST_M45PE40:
+			tp->nvram_size = TG3_NVRAM_SIZE_512KB;
+			break;
+		case FLASH_5720VENDOR_M_ST_M25PE80:
+		case FLASH_5720VENDOR_M_ST_M45PE80:
+		case FLASH_5720VENDOR_A_ST_M25PE80:
+		case FLASH_5720VENDOR_A_ST_M45PE80:
+			tp->nvram_size = TG3_NVRAM_SIZE_1MB;
+			break;
+		default:
+			tp->nvram_size = TG3_NVRAM_SIZE_128KB;
+			break;
+		}
+		break;
+	default:
+		tg3_flag_set(tp, NO_NVRAM);
+		return;
+	}
+
+	tg3_nvram_get_pagesize(tp, nvcfg1);
+	if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528)
+		tg3_flag_set(tp, NO_NVRAM_ADDR_TRANS);
 }
 
 /* Chips other than 5700/5701 use the NVRAM for fetching info. */
@@ -11905,7 +12201,7 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) {
-		tp->tg3_flags |= TG3_FLAG_NVRAM;
+		tg3_flag_set(tp, NVRAM);
 
 		if (tg3_nvram_lock(tp)) {
 			netdev_warn(tp->dev,
@@ -11935,6 +12231,8 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
 		else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
 			 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
 			tg3_get_5717_nvram_info(tp);
+		else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+			tg3_get_5720_nvram_info(tp);
 		else
 			tg3_get_nvram_info(tp);
 
@@ -11945,7 +12243,8 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
 		tg3_nvram_unlock(tp);
 
 	} else {
-		tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
+		tg3_flag_clear(tp, NVRAM);
+		tg3_flag_clear(tp, NVRAM_BUFFERED);
 
 		tg3_get_eeprom_size(tp);
 	}
@@ -12128,7 +12427,7 @@ static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len,
 			nvram_cmd |= NVRAM_CMD_LAST;
 
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752 &&
-		    !(tp->tg3_flags3 & TG3_FLG3_5755_PLUS) &&
+		    !tg3_flag(tp, 5755_PLUS) &&
 		    (tp->nvram_jedecnum == JEDEC_ST) &&
 		    (nvram_cmd & NVRAM_CMD_FIRST)) {
 
@@ -12138,7 +12437,7 @@ static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len,
 
 				break;
 		}
-		if (!(tp->tg3_flags2 & TG3_FLG2_FLASH)) {
+		if (!tg3_flag(tp, FLASH)) {
 			/* We always do complete word writes to eeprom. */
 			nvram_cmd |= (NVRAM_CMD_FIRST | NVRAM_CMD_LAST);
 		}
@@ -12154,13 +12453,13 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
 {
 	int ret;
 
-	if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
+	if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
 		tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
 		       ~GRC_LCLCTRL_GPIO_OUTPUT1);
 		udelay(40);
 	}
 
-	if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) {
+	if (!tg3_flag(tp, NVRAM)) {
 		ret = tg3_nvram_write_block_using_eeprom(tp, offset, len, buf);
 	} else {
 		u32 grc_mode;
@@ -12170,16 +12469,13 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
 			return ret;
 
 		tg3_enable_nvram_access(tp);
-		if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
-		    !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM))
+		if (tg3_flag(tp, 5750_PLUS) && !tg3_flag(tp, PROTECTED_NVRAM))
 			tw32(NVRAM_WRITE1, 0x406);
 
 		grc_mode = tr32(GRC_MODE);
 		tw32(GRC_MODE, grc_mode | GRC_MODE_NVRAM_WR_ENABLE);
 
-		if ((tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) ||
-			!(tp->tg3_flags2 & TG3_FLG2_FLASH)) {
-
+		if (tg3_flag(tp, NVRAM_BUFFERED) || !tg3_flag(tp, FLASH)) {
 			ret = tg3_nvram_write_block_buffered(tp, offset, len,
 				buf);
 		} else {
@@ -12194,7 +12490,7 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
 		tg3_nvram_unlock(tp);
 	}
 
-	if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
+	if (tg3_flag(tp, EEPROM_WRITE_PROT)) {
 		tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
 		udelay(40);
 	}
@@ -12316,19 +12612,22 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 	tp->led_ctrl = LED_CTRL_MODE_PHY_1;
 
 	/* Assume an onboard device and WOL capable by default.  */
-	tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT | TG3_FLAG_WOL_CAP;
+	tg3_flag_set(tp, EEPROM_WRITE_PROT);
+	tg3_flag_set(tp, WOL_CAP);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
 		if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM)) {
-			tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
-			tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
+			tg3_flag_clear(tp, EEPROM_WRITE_PROT);
+			tg3_flag_set(tp, IS_NIC);
 		}
 		val = tr32(VCPU_CFGSHDW);
 		if (val & VCPU_CFGSHDW_ASPM_DBNC)
-			tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
+			tg3_flag_set(tp, ASPM_WORKAROUND);
 		if ((val & VCPU_CFGSHDW_WOL_ENABLE) &&
-		    (val & VCPU_CFGSHDW_WOL_MAGPKT))
-			tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
+		    (val & VCPU_CFGSHDW_WOL_MAGPKT)) {
+			tg3_flag_set(tp, WOL_ENABLE);
+			device_set_wakeup_enable(&tp->pdev->dev, true);
+		}
 		goto done;
 	}
 
@@ -12343,9 +12642,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 
 		tg3_read_mem(tp, NIC_SRAM_DATA_VER, &ver);
 		ver >>= NIC_SRAM_DATA_VER_SHIFT;
-		if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) &&
-		    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) &&
-		    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5703) &&
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
+		    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
+		    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5703 &&
 		    (ver > 0) && (ver < 0x100))
 			tg3_read_mem(tp, NIC_SRAM_DATA_CFG_2, &cfg2);
 
@@ -12369,13 +12668,13 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 
 		tp->phy_id = eeprom_phy_id;
 		if (eeprom_phy_serdes) {
-			if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+			if (!tg3_flag(tp, 5705_PLUS))
 				tp->phy_flags |= TG3_PHYFLG_PHY_SERDES;
 			else
 				tp->phy_flags |= TG3_PHYFLG_MII_SERDES;
 		}
 
-		if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
+		if (tg3_flag(tp, 5750_PLUS))
 			led_cfg = cfg2 & (NIC_SRAM_DATA_CFG_LED_MODE_MASK |
 				    SHASTA_EXT_LED_MODE_MASK);
 		else
@@ -12435,34 +12734,36 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 			tp->led_ctrl = LED_CTRL_MODE_PHY_1;
 
 		if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
-			tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
+			tg3_flag_set(tp, EEPROM_WRITE_PROT);
 			if ((tp->pdev->subsystem_vendor ==
 			     PCI_VENDOR_ID_ARIMA) &&
 			    (tp->pdev->subsystem_device == 0x205a ||
 			     tp->pdev->subsystem_device == 0x2063))
-				tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
+				tg3_flag_clear(tp, EEPROM_WRITE_PROT);
 		} else {
-			tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
-			tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
+			tg3_flag_clear(tp, EEPROM_WRITE_PROT);
+			tg3_flag_set(tp, IS_NIC);
 		}
 
 		if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
-			tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
-			if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
-				tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
+			tg3_flag_set(tp, ENABLE_ASF);
+			if (tg3_flag(tp, 5750_PLUS))
+				tg3_flag_set(tp, ASF_NEW_HANDSHAKE);
 		}
 
 		if ((nic_cfg & NIC_SRAM_DATA_CFG_APE_ENABLE) &&
-			(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
-			tp->tg3_flags3 |= TG3_FLG3_ENABLE_APE;
+		    tg3_flag(tp, 5750_PLUS))
+			tg3_flag_set(tp, ENABLE_APE);
 
 		if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES &&
 		    !(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL))
-			tp->tg3_flags &= ~TG3_FLAG_WOL_CAP;
+			tg3_flag_clear(tp, WOL_CAP);
 
-		if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
-		    (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE))
-			tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
+		if (tg3_flag(tp, WOL_CAP) &&
+		    (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE)) {
+			tg3_flag_set(tp, WOL_ENABLE);
+			device_set_wakeup_enable(&tp->pdev->dev, true);
+		}
 
 		if (cfg2 & (1 << 17))
 			tp->phy_flags |= TG3_PHYFLG_CAPACITIVE_COUPLING;
@@ -12472,33 +12773,33 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 		if (cfg2 & (1 << 18))
 			tp->phy_flags |= TG3_PHYFLG_SERDES_PREEMPHASIS;
 
-		if (((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) ||
-		    ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
-		      GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX))) &&
+		if ((tg3_flag(tp, 57765_PLUS) ||
+		     (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+		      GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX)) &&
 		    (cfg2 & NIC_SRAM_DATA_CFG_2_APD_EN))
 			tp->phy_flags |= TG3_PHYFLG_ENABLE_APD;
 
-		if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
+		if (tg3_flag(tp, PCI_EXPRESS) &&
 		    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
-		    !(tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+		    !tg3_flag(tp, 57765_PLUS)) {
 			u32 cfg3;
 
 			tg3_read_mem(tp, NIC_SRAM_DATA_CFG_3, &cfg3);
 			if (cfg3 & NIC_SRAM_ASPM_DEBOUNCE)
-				tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
+				tg3_flag_set(tp, ASPM_WORKAROUND);
 		}
 
 		if (cfg4 & NIC_SRAM_RGMII_INBAND_DISABLE)
-			tp->tg3_flags3 |= TG3_FLG3_RGMII_INBAND_DISABLE;
+			tg3_flag_set(tp, RGMII_INBAND_DISABLE);
 		if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_RX_EN)
-			tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_RX_EN;
+			tg3_flag_set(tp, RGMII_EXT_IBND_RX_EN);
 		if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_TX_EN)
-			tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_TX_EN;
+			tg3_flag_set(tp, RGMII_EXT_IBND_TX_EN);
 	}
 done:
-	if (tp->tg3_flags & TG3_FLAG_WOL_CAP)
+	if (tg3_flag(tp, WOL_CAP))
 		device_set_wakeup_enable(&tp->pdev->dev,
-				 tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
+					 tg3_flag(tp, WOL_ENABLE));
 	else
 		device_set_wakeup_capable(&tp->pdev->dev, false);
 }
@@ -12588,18 +12889,17 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 	int err;
 
 	/* flow control autonegotiation is default behavior */
-	tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+	tg3_flag_set(tp, PAUSE_AUTONEG);
 	tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
 
-	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
+	if (tg3_flag(tp, USE_PHYLIB))
 		return tg3_phy_init(tp);
 
 	/* Reading the PHY ID register can conflict with ASF
 	 * firmware access to the PHY hardware.
 	 */
 	err = 0;
-	if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
-	    (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
+	if (tg3_flag(tp, ENABLE_ASF) || tg3_flag(tp, ENABLE_APE)) {
 		hw_phy_id = hw_phy_id_masked = TG3_PHY_ID_INVALID;
 	} else {
 		/* Now read the physical PHY_ID from the chip and verify
@@ -12655,9 +12955,9 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 	tg3_phy_init_link_config(tp);
 
 	if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
-	    !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) &&
-	    !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
-		u32 bmsr, adv_reg, tg3_ctrl, mask;
+	    !tg3_flag(tp, ENABLE_APE) &&
+	    !tg3_flag(tp, ENABLE_ASF)) {
+		u32 bmsr, mask;
 
 		tg3_readphy(tp, MII_BMSR, &bmsr);
 		if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
@@ -12668,36 +12968,18 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 		if (err)
 			return err;
 
-		adv_reg = (ADVERTISE_10HALF | ADVERTISE_10FULL |
-			   ADVERTISE_100HALF | ADVERTISE_100FULL |
-			   ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
-		tg3_ctrl = 0;
-		if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
-			tg3_ctrl = (MII_TG3_CTRL_ADV_1000_HALF |
-				    MII_TG3_CTRL_ADV_1000_FULL);
-			if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
-			    tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
-				tg3_ctrl |= (MII_TG3_CTRL_AS_MASTER |
-					     MII_TG3_CTRL_ENABLE_AS_MASTER);
-		}
+		tg3_phy_set_wirespeed(tp);
 
 		mask = (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
 			ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
 			ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full);
 		if (!tg3_copper_is_advertising_all(tp, mask)) {
-			tg3_writephy(tp, MII_ADVERTISE, adv_reg);
-
-			if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
-				tg3_writephy(tp, MII_TG3_CTRL, tg3_ctrl);
+			tg3_phy_autoneg_cfg(tp, tp->link_config.advertising,
+					    tp->link_config.flowctrl);
 
 			tg3_writephy(tp, MII_BMCR,
 				     BMCR_ANENABLE | BMCR_ANRESTART);
 		}
-		tg3_phy_set_wirespeed(tp);
-
-		tg3_writephy(tp, MII_ADVERTISE, adv_reg);
-		if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
-			tg3_writephy(tp, MII_TG3_CTRL, tg3_ctrl);
 	}
 
 skip_phy_reset:
@@ -12717,46 +12999,11 @@ static void __devinit tg3_read_vpd(struct tg3 *tp)
 	u8 *vpd_data;
 	unsigned int block_end, rosize, len;
 	int j, i = 0;
-	u32 magic;
 
-	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
-	    tg3_nvram_read(tp, 0x0, &magic))
-		goto out_no_vpd;
-
-	vpd_data = kmalloc(TG3_NVM_VPD_LEN, GFP_KERNEL);
+	vpd_data = (u8 *)tg3_vpd_readblock(tp);
 	if (!vpd_data)
 		goto out_no_vpd;
 
-	if (magic == TG3_EEPROM_MAGIC) {
-		for (i = 0; i < TG3_NVM_VPD_LEN; i += 4) {
-			u32 tmp;
-
-			/* The data is in little-endian format in NVRAM.
-			 * Use the big-endian read routines to preserve
-			 * the byte order as it exists in NVRAM.
-			 */
-			if (tg3_nvram_read_be32(tp, TG3_NVM_VPD_OFF + i, &tmp))
-				goto out_not_found;
-
-			memcpy(&vpd_data[i], &tmp, sizeof(tmp));
-		}
-	} else {
-		ssize_t cnt;
-		unsigned int pos = 0;
-
-		for (; pos < TG3_NVM_VPD_LEN && i < 3; i++, pos += cnt) {
-			cnt = pci_read_vpd(tp->pdev, pos,
-					   TG3_NVM_VPD_LEN - pos,
-					   &vpd_data[pos]);
-			if (cnt == -ETIMEDOUT || cnt == -EINTR)
-				cnt = 0;
-			else if (cnt < 0)
-				goto out_not_found;
-		}
-		if (pos != TG3_NVM_VPD_LEN)
-			goto out_not_found;
-	}
-
 	i = pci_vpd_find_tag(vpd_data, 0, TG3_NVM_VPD_LEN,
 			     PCI_VPD_LRDT_RO_DATA);
 	if (i < 0)
@@ -13010,7 +13257,7 @@ static void __devinit tg3_read_mgmtfw_ver(struct tg3 *tp)
 	if (offset == TG3_NVM_DIR_END)
 		return;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!tg3_flag(tp, 5705_PLUS))
 		start = 0x08000000;
 	else if (tg3_nvram_read(tp, offset - 4, &start))
 		return;
@@ -13050,8 +13297,7 @@ static void __devinit tg3_read_dash_ver(struct tg3 *tp)
 	u32 apedata;
 	char *fwtype;
 
-	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) ||
-	    !(tp->tg3_flags  & TG3_FLAG_ENABLE_ASF))
+	if (!tg3_flag(tp, ENABLE_APE) || !tg3_flag(tp, ENABLE_ASF))
 		return;
 
 	apedata = tg3_ape_read32(tp, TG3_APE_SEG_SIG);
@@ -13065,7 +13311,7 @@ static void __devinit tg3_read_dash_ver(struct tg3 *tp)
 	apedata = tg3_ape_read32(tp, TG3_APE_FW_VERSION);
 
 	if (tg3_ape_read32(tp, TG3_APE_FW_FEATURES) & TG3_APE_FW_FEATURE_NCSI) {
-		tp->tg3_flags3 |= TG3_FLG3_APE_HAS_NCSI;
+		tg3_flag_set(tp, APE_HAS_NCSI);
 		fwtype = "NCSI";
 	} else {
 		fwtype = "DASH";
@@ -13089,7 +13335,7 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
 	if (tp->fw_ver[0] != 0)
 		vpd_vers = true;
 
-	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) {
+	if (tg3_flag(tp, NO_NVRAM)) {
 		strcat(tp->fw_ver, "sb");
 		return;
 	}
@@ -13106,8 +13352,7 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
 	else
 		return;
 
-	if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
-	     (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) || vpd_vers)
+	if (!tg3_flag(tp, ENABLE_ASF) || tg3_flag(tp, ENABLE_APE) || vpd_vers)
 		goto done;
 
 	tg3_read_mgmtfw_ver(tp);
@@ -13118,21 +13363,14 @@ done:
 
 static struct pci_dev * __devinit tg3_find_peer(struct tg3 *);
 
-static inline void vlan_features_add(struct net_device *dev, unsigned long flags)
-{
-	dev->vlan_features |= flags;
-}
-
 static inline u32 tg3_rx_ret_ring_size(struct tg3 *tp)
 {
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
-		return 4096;
-	else if ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
-		 !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
-		return 1024;
+	if (tg3_flag(tp, LRG_PROD_RING_CAP))
+		return TG3_RX_RET_MAX_SIZE_5717;
+	else if (tg3_flag(tp, JUMBO_CAPABLE) && !tg3_flag(tp, 5780_CLASS))
+		return TG3_RX_RET_MAX_SIZE_5700;
 	else
-		return 512;
+		return TG3_RX_RET_MAX_SIZE_5705;
 }
 
 static DEFINE_PCI_DEVICE_TABLE(tg3_write_reorder_chipsets) = {
@@ -13177,7 +13415,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 
 		if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717 ||
 		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 ||
-		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5719)
+		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5719 ||
+		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5720)
 			pci_read_config_dword(tp->pdev,
 					      TG3PCI_GEN2_PRODID_ASICREV,
 					      &prod_id_asic_rev);
@@ -13254,15 +13493,14 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 			if (bridge->subordinate &&
 			    (bridge->subordinate->number ==
 			     tp->pdev->bus->number)) {
-
-				tp->tg3_flags2 |= TG3_FLG2_ICH_WORKAROUND;
+				tg3_flag_set(tp, ICH_WORKAROUND);
 				pci_dev_put(bridge);
 				break;
 			}
 		}
 	}
 
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
 		static struct tg3_dev_id {
 			u32	vendor;
 			u32	device;
@@ -13287,7 +13525,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 			     tp->pdev->bus->number) &&
 			    (bridge->subordinate->subordinate >=
 			     tp->pdev->bus->number)) {
-				tp->tg3_flags3 |= TG3_FLG3_5701_DMA_BUG;
+				tg3_flag_set(tp, 5701_DMA_BUG);
 				pci_dev_put(bridge);
 				break;
 			}
@@ -13302,8 +13540,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	 */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
-		tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
-		tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+		tg3_flag_set(tp, 5780_CLASS);
+		tg3_flag_set(tp, 40BIT_DMA_BUG);
 		tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
 	} else {
 		struct pci_dev *bridge = NULL;
@@ -13317,7 +13555,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 			     tp->pdev->bus->number) &&
 			    (bridge->subordinate->subordinate >=
 			     tp->pdev->bus->number)) {
-				tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+				tg3_flag_set(tp, 40BIT_DMA_BUG);
 				pci_dev_put(bridge);
 				break;
 			}
@@ -13332,13 +13570,18 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
 		tp->pdev_peer = tg3_find_peer(tp);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
-		tp->tg3_flags3 |= TG3_FLG3_5717_PLUS;
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+		tg3_flag_set(tp, 5717_PLUS);
+
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 ||
+	    tg3_flag(tp, 5717_PLUS))
+		tg3_flag_set(tp, 57765_PLUS);
 
 	/* Intentionally exclude ASIC_REV_5906 */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
@@ -13347,97 +13590,102 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
-	    (tp->tg3_flags3 & TG3_FLG3_5717_PLUS))
-		tp->tg3_flags3 |= TG3_FLG3_5755_PLUS;
+	    tg3_flag(tp, 57765_PLUS))
+		tg3_flag_set(tp, 5755_PLUS);
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 ||
-	    (tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
-	    (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
-		tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
-
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
-	    (tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
-		tp->tg3_flags2 |= TG3_FLG2_5705_PLUS;
-
-	/* 5700 B0 chips do not support checksumming correctly due
-	 * to hardware bugs.
-	 */
-	if (tp->pci_chip_rev_id == CHIPREV_ID_5700_B0)
-		tp->tg3_flags |= TG3_FLAG_BROKEN_CHECKSUMS;
-	else {
-		unsigned long features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_GRO;
+	    tg3_flag(tp, 5755_PLUS) ||
+	    tg3_flag(tp, 5780_CLASS))
+		tg3_flag_set(tp, 5750_PLUS);
 
-		tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
-		if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
-			features |= NETIF_F_IPV6_CSUM;
-		tp->dev->features |= features;
-		vlan_features_add(tp->dev, features);
-	}
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 ||
+	    tg3_flag(tp, 5750_PLUS))
+		tg3_flag_set(tp, 5705_PLUS);
 
 	/* Determine TSO capabilities */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
 		; /* Do nothing. HW bug. */
-	else if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS)
-		tp->tg3_flags2 |= TG3_FLG2_HW_TSO_3;
-	else if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
+	else if (tg3_flag(tp, 57765_PLUS))
+		tg3_flag_set(tp, HW_TSO_3);
+	else if (tg3_flag(tp, 5755_PLUS) ||
 		 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
-		tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2;
-	else if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
-		tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1 | TG3_FLG2_TSO_BUG;
+		tg3_flag_set(tp, HW_TSO_2);
+	else if (tg3_flag(tp, 5750_PLUS)) {
+		tg3_flag_set(tp, HW_TSO_1);
+		tg3_flag_set(tp, TSO_BUG);
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 &&
 		    tp->pci_chip_rev_id >= CHIPREV_ID_5750_C2)
-			tp->tg3_flags2 &= ~TG3_FLG2_TSO_BUG;
+			tg3_flag_clear(tp, TSO_BUG);
 	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
 		   GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
 		   tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
-		tp->tg3_flags2 |= TG3_FLG2_TSO_BUG;
+			tg3_flag_set(tp, TSO_BUG);
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
 			tp->fw_needed = FIRMWARE_TG3TSO5;
 		else
 			tp->fw_needed = FIRMWARE_TG3TSO;
 	}
 
+	/* Selectively allow TSO based on operating conditions */
+	if (tg3_flag(tp, HW_TSO_1) ||
+	    tg3_flag(tp, HW_TSO_2) ||
+	    tg3_flag(tp, HW_TSO_3) ||
+	    (tp->fw_needed && !tg3_flag(tp, ENABLE_ASF)))
+		tg3_flag_set(tp, TSO_CAPABLE);
+	else {
+		tg3_flag_clear(tp, TSO_CAPABLE);
+		tg3_flag_clear(tp, TSO_BUG);
+		tp->fw_needed = NULL;
+	}
+
+	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
+		tp->fw_needed = FIRMWARE_TG3;
+
 	tp->irq_max = 1;
 
-	if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
-		tp->tg3_flags |= TG3_FLAG_SUPPORT_MSI;
+	if (tg3_flag(tp, 5750_PLUS)) {
+		tg3_flag_set(tp, SUPPORT_MSI);
 		if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX ||
 		    GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX ||
 		    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 &&
 		     tp->pci_chip_rev_id <= CHIPREV_ID_5714_A2 &&
 		     tp->pdev_peer == tp->pdev))
-			tp->tg3_flags &= ~TG3_FLAG_SUPPORT_MSI;
+			tg3_flag_clear(tp, SUPPORT_MSI);
 
-		if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
+		if (tg3_flag(tp, 5755_PLUS) ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-			tp->tg3_flags2 |= TG3_FLG2_1SHOT_MSI;
+			tg3_flag_set(tp, 1SHOT_MSI);
 		}
 
-		if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
-			tp->tg3_flags |= TG3_FLAG_SUPPORT_MSIX;
+		if (tg3_flag(tp, 57765_PLUS)) {
+			tg3_flag_set(tp, SUPPORT_MSIX);
 			tp->irq_max = TG3_IRQ_MAX_VECS;
 		}
 	}
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
-		tp->tg3_flags3 |= TG3_FLG3_SHORT_DMA_BUG;
-	else if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS)) {
-		tp->tg3_flags3 |= TG3_FLG3_4G_DMA_BNDRY_BUG;
-		tp->tg3_flags3 |= TG3_FLG3_40BIT_DMA_LIMIT_BUG;
-	}
+	/* All chips can get confused if TX buffers
+	 * straddle the 4GB address boundary.
+	 */
+	tg3_flag_set(tp, 4G_DMA_BNDRY_BUG);
+
+	if (tg3_flag(tp, 5755_PLUS))
+		tg3_flag_set(tp, SHORT_DMA_BUG);
+	else
+		tg3_flag_set(tp, 40BIT_DMA_LIMIT_BUG);
 
-	if ((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) &&
+	if (tg3_flag(tp, 5717_PLUS))
+		tg3_flag_set(tp, LRG_PROD_RING_CAP);
+
+	if (tg3_flag(tp, 57765_PLUS) &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5719)
-		tp->tg3_flags3 |= TG3_FLG3_USE_JUMBO_BDFLAG;
+		tg3_flag_set(tp, USE_JUMBO_BDFLAG);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
-	    (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
-	    (tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG))
-		tp->tg3_flags |= TG3_FLAG_JUMBO_CAPABLE;
+	if (!tg3_flag(tp, 5705_PLUS) ||
+	    tg3_flag(tp, 5780_CLASS) ||
+	    tg3_flag(tp, USE_JUMBO_BDFLAG))
+		tg3_flag_set(tp, JUMBO_CAPABLE);
 
 	pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
 			      &pci_state_reg);
@@ -13446,10 +13694,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->pcie_cap != 0) {
 		u16 lnkctl;
 
-		tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
+		tg3_flag_set(tp, PCI_EXPRESS);
 
 		tp->pcie_readrq = 4096;
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
 			tp->pcie_readrq = 2048;
 
 		pcie_set_readrq(tp->pdev, tp->pcie_readrq);
@@ -13458,20 +13707,23 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 				     tp->pcie_cap + PCI_EXP_LNKCTL,
 				     &lnkctl);
 		if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN) {
-			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
-				tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_2;
+			if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
+			    ASIC_REV_5906) {
+				tg3_flag_clear(tp, HW_TSO_2);
+				tg3_flag_clear(tp, TSO_CAPABLE);
+			}
 			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
 			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 			    tp->pci_chip_rev_id == CHIPREV_ID_57780_A0 ||
 			    tp->pci_chip_rev_id == CHIPREV_ID_57780_A1)
-				tp->tg3_flags3 |= TG3_FLG3_CLKREQ_BUG;
+				tg3_flag_set(tp, CLKREQ_BUG);
 		} else if (tp->pci_chip_rev_id == CHIPREV_ID_5717_A0) {
-			tp->tg3_flags3 |= TG3_FLG3_L1PLLPD_EN;
+			tg3_flag_set(tp, L1PLLPD_EN);
 		}
 	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
-		tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
-	} else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
-		   (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+		tg3_flag_set(tp, PCI_EXPRESS);
+	} else if (!tg3_flag(tp, 5705_PLUS) ||
+		   tg3_flag(tp, 5780_CLASS)) {
 		tp->pcix_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_PCIX);
 		if (!tp->pcix_cap) {
 			dev_err(&tp->pdev->dev,
@@ -13480,7 +13732,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		}
 
 		if (!(pci_state_reg & PCISTATE_CONV_PCI_MODE))
-			tp->tg3_flags |= TG3_FLAG_PCIX_MODE;
+			tg3_flag_set(tp, PCIX_MODE);
 	}
 
 	/* If we have an AMD 762 or VIA K8T800 chipset, write
@@ -13490,8 +13742,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	 * posted to the chip in order.
 	 */
 	if (pci_dev_present(tg3_write_reorder_chipsets) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
-		tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
+	    !tg3_flag(tp, PCI_EXPRESS))
+		tg3_flag_set(tp, MBOX_WRITE_REORDER);
 
 	pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
 			     &tp->pci_cacheline_sz);
@@ -13508,17 +13760,17 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		/* 5700 BX chips need to have their TX producer index
 		 * mailboxes written twice to workaround a bug.
 		 */
-		tp->tg3_flags |= TG3_FLAG_TXD_MBOX_HWBUG;
+		tg3_flag_set(tp, TXD_MBOX_HWBUG);
 
 		/* If we are in PCI-X mode, enable register write workaround.
 		 *
 		 * The workaround is to use indirect register accesses
 		 * for all chip writes not to mailbox registers.
 		 */
-		if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+		if (tg3_flag(tp, PCIX_MODE)) {
 			u32 pm_reg;
 
-			tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
+			tg3_flag_set(tp, PCIX_TARGET_HWBUG);
 
 			/* The chip can have it's power management PCI config
 			 * space registers clobbered due to this bug.
@@ -13541,9 +13793,9 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	}
 
 	if ((pci_state_reg & PCISTATE_BUS_SPEED_HIGH) != 0)
-		tp->tg3_flags |= TG3_FLAG_PCI_HIGH_SPEED;
+		tg3_flag_set(tp, PCI_HIGH_SPEED);
 	if ((pci_state_reg & PCISTATE_BUS_32BIT) != 0)
-		tp->tg3_flags |= TG3_FLAG_PCI_32BIT;
+		tg3_flag_set(tp, PCI_32BIT);
 
 	/* Chip-specific fixup from Broadcom driver */
 	if ((tp->pci_chip_rev_id == CHIPREV_ID_5704_A0) &&
@@ -13561,10 +13813,10 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	tp->write32_rx_mbox = tg3_write32;
 
 	/* Various workaround register access methods */
-	if (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG)
+	if (tg3_flag(tp, PCIX_TARGET_HWBUG))
 		tp->write32 = tg3_write_indirect_reg32;
 	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
-		 ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
+		 (tg3_flag(tp, PCI_EXPRESS) &&
 		  tp->pci_chip_rev_id == CHIPREV_ID_5750_A0)) {
 		/*
 		 * Back to back register writes can cause problems on these
@@ -13576,14 +13828,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		tp->write32 = tg3_write_flush_reg32;
 	}
 
-	if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
-	    (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
+	if (tg3_flag(tp, TXD_MBOX_HWBUG) || tg3_flag(tp, MBOX_WRITE_REORDER)) {
 		tp->write32_tx_mbox = tg3_write32_tx_mbox;
-		if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+		if (tg3_flag(tp, MBOX_WRITE_REORDER))
 			tp->write32_rx_mbox = tg3_write_flush_reg32;
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND) {
+	if (tg3_flag(tp, ICH_WORKAROUND)) {
 		tp->read32 = tg3_read_indirect_reg32;
 		tp->write32 = tg3_write_indirect_reg32;
 		tp->read32_mbox = tg3_read_indirect_mbox;
@@ -13606,13 +13857,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	}
 
 	if (tp->write32 == tg3_write_indirect_reg32 ||
-	    ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
+	    (tg3_flag(tp, PCIX_MODE) &&
 	     (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
 	      GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
-		tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
+		tg3_flag_set(tp, SRAM_USE_CONFIG);
 
 	/* Get eeprom hw config before calling tg3_set_power_state().
-	 * In particular, the TG3_FLG2_IS_NIC flag must be
+	 * In particular, the TG3_FLAG_IS_NIC flag must be
 	 * determined before calling tg3_set_power_state() so that
 	 * we know whether or not to switch out of Vaux power.
 	 * When the flag is set, it means that GPIO1 is used for eeprom
@@ -13621,7 +13872,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	 */
 	tg3_get_eeprom_hw_cfg(tp);
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+	if (tg3_flag(tp, ENABLE_APE)) {
 		/* Allow reads and writes to the
 		 * APE register and memory space.
 		 */
@@ -13636,16 +13887,16 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
-	    (tp->tg3_flags3 & TG3_FLG3_5717_PLUS))
-		tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
+	    tg3_flag(tp, 57765_PLUS))
+		tg3_flag_set(tp, CPMU_PRESENT);
 
-	/* Set up tp->grc_local_ctrl before calling tg_power_up().
+	/* Set up tp->grc_local_ctrl before calling tg3_power_up().
 	 * GPIO1 driven high will bring 5700's external PHY out of reset.
 	 * It is also used as eeprom write protect on LOMs.
 	 */
 	tp->grc_local_ctrl = GRC_LCLCTRL_INT_ON_ATTN | GRC_LCLCTRL_AUTO_SEEPROM;
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
-	    (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
+	    tg3_flag(tp, EEPROM_WRITE_PROT))
 		tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
 				       GRC_LCLCTRL_GPIO_OUTPUT1);
 	/* Unused GPIO3 must be driven as output on 5752 because there
@@ -13663,7 +13914,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5761S) {
 		/* Turn off the debug UART. */
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
-		if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+		if (tg3_flag(tp, IS_NIC))
 			/* Keep VMain power. */
 			tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
 					      GRC_LCLCTRL_GPIO_OUTPUT0;
@@ -13679,26 +13930,25 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	/* Derive initial jumbo mode from MTU assigned in
 	 * ether_setup() via the alloc_etherdev() call
 	 */
-	if (tp->dev->mtu > ETH_DATA_LEN &&
-	    !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
-		tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
+	if (tp->dev->mtu > ETH_DATA_LEN && !tg3_flag(tp, 5780_CLASS))
+		tg3_flag_set(tp, JUMBO_RING_ENABLE);
 
 	/* Determine WakeOnLan speed to use. */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
 	    tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
 	    tp->pci_chip_rev_id == CHIPREV_ID_5701_B0 ||
 	    tp->pci_chip_rev_id == CHIPREV_ID_5701_B2) {
-		tp->tg3_flags &= ~(TG3_FLAG_WOL_SPEED_100MB);
+		tg3_flag_clear(tp, WOL_SPEED_100MB);
 	} else {
-		tp->tg3_flags |= TG3_FLAG_WOL_SPEED_100MB;
+		tg3_flag_set(tp, WOL_SPEED_100MB);
 	}
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		tp->phy_flags |= TG3_PHYFLG_IS_FET;
 
 	/* A few boards don't want Ethernet@WireSpeed phy feature */
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
-	    ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
+	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
 	     (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
 	     (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) ||
 	    (tp->phy_flags & TG3_PHYFLG_IS_FET) ||
@@ -13711,11 +13961,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0)
 		tp->phy_flags |= TG3_PHYFLG_5704_A0_BUG;
 
-	if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+	if (tg3_flag(tp, 5705_PLUS) &&
 	    !(tp->phy_flags & TG3_PHYFLG_IS_FET) &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780 &&
-	    !(tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
+	    !tg3_flag(tp, 57765_PLUS)) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
@@ -13736,7 +13986,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 			tp->phy_otp = TG3_OTP_DEFAULT;
 	}
 
-	if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT)
+	if (tg3_flag(tp, CPMU_PRESENT))
 		tp->mi_mode = MAC_MI_MODE_500KHZ_CONST;
 	else
 		tp->mi_mode = MAC_MI_MODE_BASE;
@@ -13746,9 +13996,17 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX)
 		tp->coalesce_mode |= HOSTCC_MODE_32BYTE;
 
+	/* Set these bits to enable statistics workaround. */
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    tp->pci_chip_rev_id == CHIPREV_ID_5719_A0 ||
+	    tp->pci_chip_rev_id == CHIPREV_ID_5720_A0) {
+		tp->coalesce_mode |= HOSTCC_MODE_ATTN;
+		tp->grc_mode |= GRC_MODE_IRQ_ON_FLOW_ATTN;
+	}
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
-		tp->tg3_flags3 |= TG3_FLG3_USE_PHYLIB;
+		tg3_flag_set(tp, USE_PHYLIB);
 
 	err = tg3_mdio_init(tp);
 	if (err)
@@ -13756,7 +14014,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 
 	/* Initialize data/descriptor byte/word swapping. */
 	val = tr32(GRC_MODE);
-	val &= GRC_MODE_HOST_STACKUP;
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
+		val &= (GRC_MODE_BYTE_SWAP_B2HRX_DATA |
+			GRC_MODE_WORD_SWAP_B2HRX_DATA |
+			GRC_MODE_B2HRX_ENABLE |
+			GRC_MODE_HTX2B_ENABLE |
+			GRC_MODE_HOST_STACKUP);
+	else
+		val &= GRC_MODE_HOST_STACKUP;
+
 	tw32(GRC_MODE, val | tp->grc_mode);
 
 	tg3_switch_clocks(tp);
@@ -13767,7 +14033,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
 			      &pci_state_reg);
 	if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0 &&
-	    (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) == 0) {
+	    !tg3_flag(tp, PCIX_TARGET_HWBUG)) {
 		u32 chiprevid = GET_CHIP_REV_ID(tp->misc_host_ctrl);
 
 		if (chiprevid == CHIPREV_ID_5701_A0 ||
@@ -13786,7 +14052,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 			writel(0x00000000, sram_base + 4);
 			writel(0xffffffff, sram_base + 4);
 			if (readl(sram_base) != 0x00000000)
-				tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
+				tg3_flag_set(tp, PCIX_TARGET_HWBUG);
 		}
 	}
 
@@ -13799,12 +14065,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
 	    (grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788 ||
 	     grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M))
-		tp->tg3_flags2 |= TG3_FLG2_IS_5788;
+		tg3_flag_set(tp, IS_5788);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700))
-		tp->tg3_flags |= TG3_FLAG_TAGGED_STATUS;
-	if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
+	if (!tg3_flag(tp, IS_5788) &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
+		tg3_flag_set(tp, TAGGED_STATUS);
+	if (tg3_flag(tp, TAGGED_STATUS)) {
 		tp->coalesce_mode |= (HOSTCC_MODE_CLRTICK_RXBD |
 				      HOSTCC_MODE_CLRTICK_TXBD);
 
@@ -13814,7 +14080,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	}
 
 	/* Preserve the APE MAC_MODE bits */
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+	if (tg3_flag(tp, ENABLE_APE))
 		tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
 	else
 		tp->mac_mode = TG3_DEF_MAC_MODE;
@@ -13861,9 +14127,9 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	 * status register in those cases.
 	 */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
-		tp->tg3_flags |= TG3_FLAG_USE_LINKCHG_REG;
+		tg3_flag_set(tp, USE_LINKCHG_REG);
 	else
-		tp->tg3_flags &= ~TG3_FLAG_USE_LINKCHG_REG;
+		tg3_flag_clear(tp, USE_LINKCHG_REG);
 
 	/* The led_ctrl is set during tg3_phy_probe, here we might
 	 * have to force the link status polling mechanism based
@@ -13873,19 +14139,19 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
 	    !(tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) {
 		tp->phy_flags |= TG3_PHYFLG_USE_MI_INTERRUPT;
-		tp->tg3_flags |= TG3_FLAG_USE_LINKCHG_REG;
+		tg3_flag_set(tp, USE_LINKCHG_REG);
 	}
 
 	/* For all SERDES we poll the MAC status register. */
 	if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
-		tp->tg3_flags |= TG3_FLAG_POLL_SERDES;
+		tg3_flag_set(tp, POLL_SERDES);
 	else
-		tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
+		tg3_flag_clear(tp, POLL_SERDES);
 
 	tp->rx_offset = NET_IP_ALIGN;
 	tp->rx_copy_thresh = TG3_RX_COPY_THRESHOLD;
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
-	    (tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) {
+	    tg3_flag(tp, PCIX_MODE)) {
 		tp->rx_offset = 0;
 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 		tp->rx_copy_thresh = ~(u16)0;
@@ -13906,7 +14172,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
 		tp->rx_std_max_post = 8;
 
-	if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND)
+	if (tg3_flag(tp, ASPM_WORKAROUND))
 		tp->pwrmgmt_thresh = tr32(PCIE_PWR_MGMT_THRESH) &
 				     PCIE_PWR_MGMT_L1_THRESH_MSK;
 
@@ -13953,16 +14219,15 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 #endif
 
 	mac_offset = 0x7c;
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
-	    (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
+	    tg3_flag(tp, 5780_CLASS)) {
 		if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
 			mac_offset = 0xcc;
 		if (tg3_nvram_lock(tp))
 			tw32_f(NVRAM_CMD, NVRAM_CMD_RESET);
 		else
 			tg3_nvram_unlock(tp);
-	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-		   GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+	} else if (tg3_flag(tp, 5717_PLUS)) {
 		if (PCI_FUNC(tp->pdev->devfn) & 1)
 			mac_offset = 0xcc;
 		if (PCI_FUNC(tp->pdev->devfn) > 1)
@@ -13987,7 +14252,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 	}
 	if (!addr_ok) {
 		/* Next, try NVRAM. */
-		if (!(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) &&
+		if (!tg3_flag(tp, NO_NVRAM) &&
 		    !tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
 		    !tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) {
 			memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
@@ -14038,7 +14303,7 @@ static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
 	 */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
-	    !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
+	    !tg3_flag(tp, PCI_EXPRESS))
 		goto out;
 
 #if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC)
@@ -14051,7 +14316,7 @@ static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
 #endif
 #endif
 
-	if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
+	if (tg3_flag(tp, 57765_PLUS)) {
 		val = goal ? 0 : DMA_RWCTRL_DIS_CACHE_ALIGNMENT;
 		goto out;
 	}
@@ -14070,8 +14335,7 @@ static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
 	 * other than 5700 and 5701 which do not implement the
 	 * boundary bits.
 	 */
-	if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
+	if (tg3_flag(tp, PCIX_MODE) && !tg3_flag(tp, PCI_EXPRESS)) {
 		switch (cacheline_size) {
 		case 16:
 		case 32:
@@ -14096,7 +14360,7 @@ static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
 				DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
 			break;
 		}
-	} else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+	} else if (tg3_flag(tp, PCI_EXPRESS)) {
 		switch (cacheline_size) {
 		case 16:
 		case 32:
@@ -14268,13 +14532,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 
 	tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl);
 
-	if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS)
+	if (tg3_flag(tp, 57765_PLUS))
 		goto out;
 
-	if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+	if (tg3_flag(tp, PCI_EXPRESS)) {
 		/* DMA read watermark not used on PCIE */
 		tp->dma_rwctrl |= 0x00180000;
-	} else if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
+	} else if (!tg3_flag(tp, PCIX_MODE)) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
 			tp->dma_rwctrl |= 0x003f0000;
@@ -14290,7 +14554,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 			 * do the less restrictive ONE_DMA workaround for
 			 * better performance.
 			 */
-			if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
+			if (tg3_flag(tp, 40BIT_DMA_BUG) &&
 			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
 				tp->dma_rwctrl |= 0x8000;
 			else if (ccval == 0x6 || ccval == 0x7)
@@ -14419,7 +14683,6 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 	}
 	if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
 	    DMA_RWCTRL_WRITE_BNDRY_16) {
-
 		/* DMA test passed without adjusting DMA boundary,
 		 * now look for chipsets that are known to expose the
 		 * DMA bug without failing the test.
@@ -14443,7 +14706,7 @@ out_nofree:
 
 static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
 {
-	if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
+	if (tg3_flag(tp, 57765_PLUS)) {
 		tp->bufmgr_config.mbuf_read_dma_low_water =
 			DEFAULT_MB_RDMA_LOW_WATER_5705;
 		tp->bufmgr_config.mbuf_mac_rx_low_water =
@@ -14457,7 +14720,7 @@ static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
 			DEFAULT_MB_MACRX_LOW_WATER_JUMBO_57765;
 		tp->bufmgr_config.mbuf_high_water_jumbo =
 			DEFAULT_MB_HIGH_WATER_JUMBO_57765;
-	} else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+	} else if (tg3_flag(tp, 5705_PLUS)) {
 		tp->bufmgr_config.mbuf_read_dma_low_water =
 			DEFAULT_MB_RDMA_LOW_WATER_5705;
 		tp->bufmgr_config.mbuf_mac_rx_low_water =
@@ -14521,6 +14784,7 @@ static char * __devinit tg3_phy_string(struct tg3 *tp)
 	case TG3_PHY_ID_BCM5718S:	return "5718S";
 	case TG3_PHY_ID_BCM57765:	return "57765";
 	case TG3_PHY_ID_BCM5719C:	return "5719C";
+	case TG3_PHY_ID_BCM5720C:	return "5720C";
 	case TG3_PHY_ID_BCM8002:	return "8002/serdes";
 	case 0:			return "serdes";
 	default:		return "unknown";
@@ -14529,10 +14793,10 @@ static char * __devinit tg3_phy_string(struct tg3 *tp)
 
 static char * __devinit tg3_bus_string(struct tg3 *tp, char *str)
 {
-	if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
+	if (tg3_flag(tp, PCI_EXPRESS)) {
 		strcpy(str, "PCI Express");
 		return str;
-	} else if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
+	} else if (tg3_flag(tp, PCIX_MODE)) {
 		u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL) & 0x1f;
 
 		strcpy(str, "PCIX:");
@@ -14551,12 +14815,12 @@ static char * __devinit tg3_bus_string(struct tg3 *tp, char *str)
 			strcat(str, "100MHz");
 	} else {
 		strcpy(str, "PCI:");
-		if (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED)
+		if (tg3_flag(tp, PCI_HIGH_SPEED))
 			strcat(str, "66MHz");
 		else
 			strcat(str, "33MHz");
 	}
-	if (tp->tg3_flags & TG3_FLAG_PCI_32BIT)
+	if (tg3_flag(tp, PCI_32BIT))
 		strcat(str, ":32-bit");
 	else
 		strcat(str, ":64-bit");
@@ -14615,7 +14879,7 @@ static void __devinit tg3_init_coal(struct tg3 *tp)
 		ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT_CLRTCKS;
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+	if (tg3_flag(tp, 5705_PLUS)) {
 		ec->rx_coalesce_usecs_irq = 0;
 		ec->tx_coalesce_usecs_irq = 0;
 		ec->stats_block_coalesce_usecs = 0;
@@ -14633,22 +14897,8 @@ static const struct net_device_ops tg3_netdev_ops = {
 	.ndo_do_ioctl		= tg3_ioctl,
 	.ndo_tx_timeout		= tg3_tx_timeout,
 	.ndo_change_mtu		= tg3_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= tg3_poll_controller,
-#endif
-};
-
-static const struct net_device_ops tg3_netdev_ops_dma_bug = {
-	.ndo_open		= tg3_open,
-	.ndo_stop		= tg3_close,
-	.ndo_start_xmit		= tg3_start_xmit_dma_bug,
-	.ndo_get_stats64	= tg3_get_stats64,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= tg3_set_rx_mode,
-	.ndo_set_mac_address	= tg3_set_mac_addr,
-	.ndo_do_ioctl		= tg3_ioctl,
-	.ndo_tx_timeout		= tg3_tx_timeout,
-	.ndo_change_mtu		= tg3_change_mtu,
+	.ndo_fix_features	= tg3_fix_features,
+	.ndo_set_features	= tg3_set_features,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= tg3_poll_controller,
 #endif
@@ -14663,6 +14913,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	u32 sndmbx, rcvmbx, intmbx;
 	char str[40];
 	u64 dma_mask, persist_dma_mask;
+	u32 features = 0;
 
 	printk_once(KERN_INFO "%s\n", version);
 
@@ -14698,8 +14949,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
-	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-
 	tp = netdev_priv(dev);
 	tp->pdev = pdev;
 	tp->dev = dev;
@@ -14749,6 +14998,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	dev->ethtool_ops = &tg3_ethtool_ops;
 	dev->watchdog_timeo = TG3_TX_TIMEOUT;
+	dev->netdev_ops = &tg3_netdev_ops;
 	dev->irq = pdev->irq;
 
 	err = tg3_get_invariants(tp);
@@ -14758,23 +15008,15 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
-	if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5719)
-		dev->netdev_ops = &tg3_netdev_ops;
-	else
-		dev->netdev_ops = &tg3_netdev_ops_dma_bug;
-
-
 	/* The EPB bridge inside 5714, 5715, and 5780 and any
 	 * device behind the EPB cannot support DMA addresses > 40-bit.
 	 * On 64-bit systems with IOMMU, use 40-bit dma_mask.
 	 * On 64-bit systems without IOMMU, use 64-bit dma_mask and
 	 * do DMA address check in tg3_start_xmit().
 	 */
-	if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+	if (tg3_flag(tp, IS_5788))
 		persist_dma_mask = dma_mask = DMA_BIT_MASK(32);
-	else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
+	else if (tg3_flag(tp, 40BIT_DMA_BUG)) {
 		persist_dma_mask = dma_mask = DMA_BIT_MASK(40);
 #ifdef CONFIG_HIGHMEM
 		dma_mask = DMA_BIT_MASK(64);
@@ -14786,7 +15028,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	if (dma_mask > DMA_BIT_MASK(32)) {
 		err = pci_set_dma_mask(pdev, dma_mask);
 		if (!err) {
-			dev->features |= NETIF_F_HIGHDMA;
+			features |= NETIF_F_HIGHDMA;
 			err = pci_set_consistent_dma_mask(pdev,
 							  persist_dma_mask);
 			if (err < 0) {
@@ -14807,48 +15049,58 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 	tg3_init_bufmgr_config(tp);
 
-	/* Selectively allow TSO based on operating conditions */
-	if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) ||
-	    (tp->fw_needed && !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)))
-		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
-	else {
-		tp->tg3_flags2 &= ~(TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG);
-		tp->fw_needed = NULL;
-	}
+	features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 
-	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
-		tp->fw_needed = FIRMWARE_TG3;
+	/* 5700 B0 chips do not support checksumming correctly due
+	 * to hardware bugs.
+	 */
+	if (tp->pci_chip_rev_id != CHIPREV_ID_5700_B0) {
+		features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+
+		if (tg3_flag(tp, 5755_PLUS))
+			features |= NETIF_F_IPV6_CSUM;
+	}
 
 	/* TSO is on by default on chips that support hardware TSO.
 	 * Firmware TSO on older chips gives lower performance, so it
 	 * is off by default, but can be enabled using ethtool.
 	 */
-	if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) &&
-	    (dev->features & NETIF_F_IP_CSUM)) {
-		dev->features |= NETIF_F_TSO;
-		vlan_features_add(dev, NETIF_F_TSO);
-	}
-	if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) ||
-	    (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3)) {
-		if (dev->features & NETIF_F_IPV6_CSUM) {
-			dev->features |= NETIF_F_TSO6;
-			vlan_features_add(dev, NETIF_F_TSO6);
-		}
-		if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+	if ((tg3_flag(tp, HW_TSO_1) ||
+	     tg3_flag(tp, HW_TSO_2) ||
+	     tg3_flag(tp, HW_TSO_3)) &&
+	    (features & NETIF_F_IP_CSUM))
+		features |= NETIF_F_TSO;
+	if (tg3_flag(tp, HW_TSO_2) || tg3_flag(tp, HW_TSO_3)) {
+		if (features & NETIF_F_IPV6_CSUM)
+			features |= NETIF_F_TSO6;
+		if (tg3_flag(tp, HW_TSO_3) ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 		    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
 		     GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
-			GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
-		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
-			dev->features |= NETIF_F_TSO_ECN;
-			vlan_features_add(dev, NETIF_F_TSO_ECN);
-		}
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+			features |= NETIF_F_TSO_ECN;
 	}
 
+	dev->features |= features;
+	dev->vlan_features |= features;
+
+	/*
+	 * Add loopback capability only for a subset of devices that support
+	 * MAC-LOOPBACK. Eventually this need to be enhanced to allow INT-PHY
+	 * loopback for the remaining devices.
+	 */
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780 &&
+	    !tg3_flag(tp, CPMU_PRESENT))
+		/* Add the loopback capability */
+		features |= NETIF_F_LOOPBACK;
+
+	dev->hw_features |= features;
+
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 &&
-	    !(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
+	    !tg3_flag(tp, TSO_CAPABLE) &&
 	    !(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) {
-		tp->tg3_flags2 |= TG3_FLG2_MAX_RXPEND_64;
+		tg3_flag_set(tp, MAX_RXPEND_64);
 		tp->rx_pending = 63;
 	}
 
@@ -14859,7 +15111,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
-	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+	if (tg3_flag(tp, ENABLE_APE)) {
 		tp->aperegs = pci_ioremap_bar(pdev, BAR_2);
 		if (!tp->aperegs) {
 			dev_err(&pdev->dev,
@@ -14870,7 +15122,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
 		tg3_ape_lock_init(tp);
 
-		if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF)
+		if (tg3_flag(tp, ENABLE_ASF))
 			tg3_read_dash_ver(tp);
 	}
 
@@ -14914,7 +15166,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		else
 			tnapi->coal_now = HOSTCC_MODE_NOW;
 
-		if (!(tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX))
+		if (!tg3_flag(tp, SUPPORT_MSIX))
 			break;
 
 		/*
@@ -14968,21 +15220,25 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 			ethtype = "10/100/1000Base-T";
 
 		netdev_info(dev, "attached PHY is %s (%s Ethernet) "
-			    "(WireSpeed[%d])\n", tg3_phy_string(tp), ethtype,
-			  (tp->phy_flags & TG3_PHYFLG_NO_ETH_WIRE_SPEED) == 0);
+			    "(WireSpeed[%d], EEE[%d])\n",
+			    tg3_phy_string(tp), ethtype,
+			    (tp->phy_flags & TG3_PHYFLG_NO_ETH_WIRE_SPEED) == 0,
+			    (tp->phy_flags & TG3_PHYFLG_EEE_CAP) != 0);
 	}
 
 	netdev_info(dev, "RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
-		    (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
-		    (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
+		    (dev->features & NETIF_F_RXCSUM) != 0,
+		    tg3_flag(tp, USE_LINKCHG_REG) != 0,
 		    (tp->phy_flags & TG3_PHYFLG_USE_MI_INTERRUPT) != 0,
-		    (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
-		    (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
+		    tg3_flag(tp, ENABLE_ASF) != 0,
+		    tg3_flag(tp, TSO_CAPABLE) != 0);
 	netdev_info(dev, "dma_rwctrl[%08x] dma_mask[%d-bit]\n",
 		    tp->dma_rwctrl,
 		    pdev->dma_mask == DMA_BIT_MASK(32) ? 32 :
 		    ((u64)pdev->dma_mask) == DMA_BIT_MASK(40) ? 40 : 64);
 
+	pci_save_state(pdev);
+
 	return 0;
 
 err_out_apeunmap:
@@ -15021,7 +15277,7 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev)
 
 		cancel_work_sync(&tp->reset_task);
 
-		if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+		if (!tg3_flag(tp, USE_PHYLIB)) {
 			tg3_phy_fini(tp);
 			tg3_mdio_fini(tp);
 		}
@@ -15067,7 +15323,7 @@ static int tg3_suspend(struct device *device)
 
 	tg3_full_lock(tp, 0);
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-	tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
+	tg3_flag_clear(tp, INIT_COMPLETE);
 	tg3_full_unlock(tp);
 
 	err = tg3_power_down_prepare(tp);
@@ -15076,7 +15332,7 @@ static int tg3_suspend(struct device *device)
 
 		tg3_full_lock(tp, 0);
 
-		tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+		tg3_flag_set(tp, INIT_COMPLETE);
 		err2 = tg3_restart_hw(tp, 1);
 		if (err2)
 			goto out;
@@ -15111,7 +15367,7 @@ static int tg3_resume(struct device *device)
 
 	tg3_full_lock(tp, 0);
 
-	tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+	tg3_flag_set(tp, INIT_COMPLETE);
 	err = tg3_restart_hw(tp, 1);
 	if (err)
 		goto out;
@@ -15139,11 +15395,156 @@ static SIMPLE_DEV_PM_OPS(tg3_pm_ops, tg3_suspend, tg3_resume);
 
 #endif /* CONFIG_PM_SLEEP */
 
+/**
+ * tg3_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t tg3_io_error_detected(struct pci_dev *pdev,
+					      pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct tg3 *tp = netdev_priv(netdev);
+	pci_ers_result_t err = PCI_ERS_RESULT_NEED_RESET;
+
+	netdev_info(netdev, "PCI I/O error detected\n");
+
+	rtnl_lock();
+
+	if (!netif_running(netdev))
+		goto done;
+
+	tg3_phy_stop(tp);
+
+	tg3_netif_stop(tp);
+
+	del_timer_sync(&tp->timer);
+	tg3_flag_clear(tp, RESTART_TIMER);
+
+	/* Want to make sure that the reset task doesn't run */
+	cancel_work_sync(&tp->reset_task);
+	tg3_flag_clear(tp, TX_RECOVERY_PENDING);
+	tg3_flag_clear(tp, RESTART_TIMER);
+
+	netif_device_detach(netdev);
+
+	/* Clean up software state, even if MMIO is blocked */
+	tg3_full_lock(tp, 0);
+	tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
+	tg3_full_unlock(tp);
+
+done:
+	if (state == pci_channel_io_perm_failure)
+		err = PCI_ERS_RESULT_DISCONNECT;
+	else
+		pci_disable_device(pdev);
+
+	rtnl_unlock();
+
+	return err;
+}
+
+/**
+ * tg3_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ * At this point, the card has exprienced a hard reset,
+ * followed by fixups by BIOS, and has its config space
+ * set up identically to what it was at cold boot.
+ */
+static pci_ers_result_t tg3_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct tg3 *tp = netdev_priv(netdev);
+	pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+	int err;
+
+	rtnl_lock();
+
+	if (pci_enable_device(pdev)) {
+		netdev_err(netdev, "Cannot re-enable PCI device after reset.\n");
+		goto done;
+	}
+
+	pci_set_master(pdev);
+	pci_restore_state(pdev);
+	pci_save_state(pdev);
+
+	if (!netif_running(netdev)) {
+		rc = PCI_ERS_RESULT_RECOVERED;
+		goto done;
+	}
+
+	err = tg3_power_up(tp);
+	if (err) {
+		netdev_err(netdev, "Failed to restore register access.\n");
+		goto done;
+	}
+
+	rc = PCI_ERS_RESULT_RECOVERED;
+
+done:
+	rtnl_unlock();
+
+	return rc;
+}
+
+/**
+ * tg3_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells
+ * us that its OK to resume normal operation.
+ */
+static void tg3_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct tg3 *tp = netdev_priv(netdev);
+	int err;
+
+	rtnl_lock();
+
+	if (!netif_running(netdev))
+		goto done;
+
+	tg3_full_lock(tp, 0);
+	tg3_flag_set(tp, INIT_COMPLETE);
+	err = tg3_restart_hw(tp, 1);
+	tg3_full_unlock(tp);
+	if (err) {
+		netdev_err(netdev, "Cannot restart hardware after reset.\n");
+		goto done;
+	}
+
+	netif_device_attach(netdev);
+
+	tp->timer.expires = jiffies + tp->timer_offset;
+	add_timer(&tp->timer);
+
+	tg3_netif_start(tp);
+
+	tg3_phy_start(tp);
+
+done:
+	rtnl_unlock();
+}
+
+static struct pci_error_handlers tg3_err_handler = {
+	.error_detected	= tg3_io_error_detected,
+	.slot_reset	= tg3_io_slot_reset,
+	.resume		= tg3_io_resume
+};
+
 static struct pci_driver tg3_driver = {
 	.name		= DRV_MODULE_NAME,
 	.id_table	= tg3_pci_tbl,
 	.probe		= tg3_init_one,
 	.remove		= __devexit_p(tg3_remove_one),
+	.err_handler	= &tg3_err_handler,
 	.driver.pm	= TG3_PM_OPS,
 };
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 73884b69b74..5b3d2f34da7 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -23,11 +23,13 @@
 #define TG3_BDINFO_NIC_ADDR		0xcUL /* 32-bit */
 #define TG3_BDINFO_SIZE			0x10UL
 
-#define TG3_RX_INTERNAL_RING_SZ_5906	32
-
-#define RX_STD_MAX_SIZE_5705		512
-#define RX_STD_MAX_SIZE_5717		2048
-#define RX_JUMBO_MAX_SIZE		0xdeadbeef /* XXX */
+#define TG3_RX_STD_MAX_SIZE_5700	512
+#define TG3_RX_STD_MAX_SIZE_5717	2048
+#define TG3_RX_JMB_MAX_SIZE_5700	256
+#define TG3_RX_JMB_MAX_SIZE_5717	1024
+#define TG3_RX_RET_MAX_SIZE_5700	1024
+#define TG3_RX_RET_MAX_SIZE_5705	512
+#define TG3_RX_RET_MAX_SIZE_5717	4096
 
 /* First 256 bytes are a mirror of PCI config space. */
 #define TG3PCI_VENDOR			0x00000000
@@ -54,6 +56,7 @@
 #define  TG3PCI_DEVICE_TIGON3_57791	 0x16b2
 #define  TG3PCI_DEVICE_TIGON3_57795	 0x16b6
 #define  TG3PCI_DEVICE_TIGON3_5719	 0x1657
+#define  TG3PCI_DEVICE_TIGON3_5720	 0x165f
 /* 0x04 --> 0x2c unused */
 #define TG3PCI_SUBVENDOR_ID_BROADCOM		PCI_VENDOR_ID_BROADCOM
 #define TG3PCI_SUBDEVICE_ID_BROADCOM_95700A6	0x1644
@@ -142,6 +145,7 @@
 #define  CHIPREV_ID_5717_A0		 0x05717000
 #define  CHIPREV_ID_57765_A0		 0x57785000
 #define  CHIPREV_ID_5719_A0		 0x05719000
+#define  CHIPREV_ID_5720_A0		 0x05720000
 #define  GET_ASIC_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 12)
 #define   ASIC_REV_5700			 0x07
 #define   ASIC_REV_5701			 0x00
@@ -163,6 +167,7 @@
 #define   ASIC_REV_5717			 0x5717
 #define   ASIC_REV_57765		 0x57785
 #define   ASIC_REV_5719			 0x5719
+#define   ASIC_REV_5720			 0x5720
 #define  GET_CHIP_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 8)
 #define   CHIPREV_5700_AX		 0x70
 #define   CHIPREV_5700_BX		 0x71
@@ -175,6 +180,7 @@
 #define   CHIPREV_5750_BX		 0x41
 #define   CHIPREV_5784_AX		 0x57840
 #define   CHIPREV_5761_AX		 0x57610
+#define   CHIPREV_57765_AX		 0x577650
 #define  GET_METAL_REV(CHIP_REV_ID)	((CHIP_REV_ID) & 0xff)
 #define   METAL_REV_A0			 0x00
 #define   METAL_REV_A1			 0x01
@@ -183,6 +189,7 @@
 #define   METAL_REV_B2			 0x02
 #define TG3PCI_DMA_RW_CTRL		0x0000006c
 #define  DMA_RWCTRL_DIS_CACHE_ALIGNMENT  0x00000001
+#define  DMA_RWCTRL_TAGGED_STAT_WA	 0x00000080
 #define  DMA_RWCTRL_CRDRDR_RDMA_MRRS_MSK 0x00000380
 #define  DMA_RWCTRL_READ_BNDRY_MASK	 0x00000700
 #define  DMA_RWCTRL_READ_BNDRY_DISAB	 0x00000000
@@ -473,6 +480,8 @@
 #define  TX_MODE_BIG_BCKOFF_ENABLE	 0x00000020
 #define  TX_MODE_LONG_PAUSE_ENABLE	 0x00000040
 #define  TX_MODE_MBUF_LOCKUP_FIX	 0x00000100
+#define  TX_MODE_JMB_FRM_LEN		 0x00400000
+#define  TX_MODE_CNT_DN_MODE		 0x00800000
 #define MAC_TX_STATUS			0x00000460
 #define  TX_STATUS_XOFFED		 0x00000001
 #define  TX_STATUS_SENT_XOFF		 0x00000002
@@ -487,6 +496,8 @@
 #define  TX_LENGTHS_IPG_SHIFT		 8
 #define  TX_LENGTHS_IPG_CRS_MASK	 0x00003000
 #define  TX_LENGTHS_IPG_CRS_SHIFT	 12
+#define  TX_LENGTHS_JMB_FRM_LEN_MSK	 0x00ff0000
+#define  TX_LENGTHS_CNT_DWN_VAL_MSK	 0xff000000
 #define MAC_RX_MODE			0x00000468
 #define  RX_MODE_RESET			 0x00000001
 #define  RX_MODE_ENABLE			 0x00000002
@@ -1079,6 +1090,9 @@
 #define  CPMU_HST_ACC_MACCLK_6_25	 0x00130000
 /* 0x3620 --> 0x3630 unused */
 
+#define TG3_CPMU_CLCK_ORIDE		0x00003624
+#define  CPMU_CLCK_ORIDE_MAC_ORIDE_EN	 0x80000000
+
 #define TG3_CPMU_CLCK_STAT		0x00003630
 #define  CPMU_CLCK_STAT_MAC_CLCK_MASK	 0x001f0000
 #define  CPMU_CLCK_STAT_MAC_CLCK_62_5	 0x00000000
@@ -1188,6 +1202,7 @@
 #define HOSTCC_STATS_BLK_NIC_ADDR	0x00003c40
 #define HOSTCC_STATUS_BLK_NIC_ADDR	0x00003c44
 #define HOSTCC_FLOW_ATTN		0x00003c48
+#define HOSTCC_FLOW_ATTN_MBUF_LWM	 0x00000040
 /* 0x3c4c --> 0x3c50 unused */
 #define HOSTCC_JUMBO_CON_IDX		0x00003c50
 #define HOSTCC_STD_CON_IDX		0x00003c54
@@ -1321,6 +1336,7 @@
 #define  RDMAC_MODE_MULT_DMA_RD_DIS	 0x01000000
 #define  RDMAC_MODE_IPV4_LSO_EN		 0x08000000
 #define  RDMAC_MODE_IPV6_LSO_EN		 0x10000000
+#define  RDMAC_MODE_H2BNC_VLAN_DET	 0x20000000
 #define RDMAC_STATUS			0x00004804
 #define  RDMAC_STATUS_TGTABORT		 0x00000004
 #define  RDMAC_STATUS_MSTABORT		 0x00000008
@@ -1597,6 +1613,7 @@
 #define  MSGINT_MODE_ONE_SHOT_DISABLE	 0x00000020
 #define  MSGINT_MODE_MULTIVEC_EN	 0x00000080
 #define MSGINT_STATUS			0x00006004
+#define  MSGINT_STATUS_MSI_REQ		 0x00000001
 #define MSGINT_FIFO			0x00006008
 /* 0x600c --> 0x6400 unused */
 
@@ -1613,6 +1630,8 @@
 #define  GRC_MODE_WSWAP_NONFRM_DATA	0x00000004
 #define  GRC_MODE_BSWAP_DATA		0x00000010
 #define  GRC_MODE_WSWAP_DATA		0x00000020
+#define  GRC_MODE_BYTE_SWAP_B2HRX_DATA	0x00000040
+#define  GRC_MODE_WORD_SWAP_B2HRX_DATA	0x00000080
 #define  GRC_MODE_SPLITHDR		0x00000100
 #define  GRC_MODE_NOFRM_CRACKING	0x00000200
 #define  GRC_MODE_INCL_CRC		0x00000400
@@ -1620,8 +1639,10 @@
 #define  GRC_MODE_NOIRQ_ON_SENDS	0x00002000
 #define  GRC_MODE_NOIRQ_ON_RCV		0x00004000
 #define  GRC_MODE_FORCE_PCI32BIT	0x00008000
+#define  GRC_MODE_B2HRX_ENABLE		0x00008000
 #define  GRC_MODE_HOST_STACKUP		0x00010000
 #define  GRC_MODE_HOST_SENDBDS		0x00020000
+#define  GRC_MODE_HTX2B_ENABLE		0x00040000
 #define  GRC_MODE_NO_TX_PHDR_CSUM	0x00100000
 #define  GRC_MODE_NVRAM_WR_ENABLE	0x00200000
 #define  GRC_MODE_PCIE_TL_SEL		0x00000000
@@ -1818,6 +1839,38 @@
 #define  FLASH_5717VENDOR_ATMEL_45USPT	 0x03400000
 #define  FLASH_5717VENDOR_ST_25USPT	 0x03400002
 #define  FLASH_5717VENDOR_ST_45USPT	 0x03400001
+#define  FLASH_5720_EEPROM_HD		 0x00000001
+#define  FLASH_5720_EEPROM_LD		 0x00000003
+#define  FLASH_5720VENDOR_M_ATMEL_DB011D 0x01000000
+#define  FLASH_5720VENDOR_M_ATMEL_DB021D 0x01000002
+#define  FLASH_5720VENDOR_M_ATMEL_DB041D 0x01000001
+#define  FLASH_5720VENDOR_M_ATMEL_DB081D 0x01000003
+#define  FLASH_5720VENDOR_M_ST_M25PE10	 0x02000000
+#define  FLASH_5720VENDOR_M_ST_M25PE20	 0x02000002
+#define  FLASH_5720VENDOR_M_ST_M25PE40	 0x02000001
+#define  FLASH_5720VENDOR_M_ST_M25PE80	 0x02000003
+#define  FLASH_5720VENDOR_M_ST_M45PE10	 0x03000000
+#define  FLASH_5720VENDOR_M_ST_M45PE20	 0x03000002
+#define  FLASH_5720VENDOR_M_ST_M45PE40	 0x03000001
+#define  FLASH_5720VENDOR_M_ST_M45PE80	 0x03000003
+#define  FLASH_5720VENDOR_A_ATMEL_DB011B 0x01800000
+#define  FLASH_5720VENDOR_A_ATMEL_DB021B 0x01800002
+#define  FLASH_5720VENDOR_A_ATMEL_DB041B 0x01800001
+#define  FLASH_5720VENDOR_A_ATMEL_DB011D 0x01c00000
+#define  FLASH_5720VENDOR_A_ATMEL_DB021D 0x01c00002
+#define  FLASH_5720VENDOR_A_ATMEL_DB041D 0x01c00001
+#define  FLASH_5720VENDOR_A_ATMEL_DB081D 0x01c00003
+#define  FLASH_5720VENDOR_A_ST_M25PE10	 0x02800000
+#define  FLASH_5720VENDOR_A_ST_M25PE20	 0x02800002
+#define  FLASH_5720VENDOR_A_ST_M25PE40	 0x02800001
+#define  FLASH_5720VENDOR_A_ST_M25PE80	 0x02800003
+#define  FLASH_5720VENDOR_A_ST_M45PE10	 0x02c00000
+#define  FLASH_5720VENDOR_A_ST_M45PE20	 0x02c00002
+#define  FLASH_5720VENDOR_A_ST_M45PE40	 0x02c00001
+#define  FLASH_5720VENDOR_A_ST_M45PE80	 0x02c00003
+#define  FLASH_5720VENDOR_ATMEL_45USPT	 0x03c00000
+#define  FLASH_5720VENDOR_ST_25USPT	 0x03c00002
+#define  FLASH_5720VENDOR_ST_45USPT	 0x03c00001
 #define  NVRAM_CFG1_5752PAGE_SIZE_MASK	 0x70000000
 #define  FLASH_5752PAGE_SIZE_256	 0x00000000
 #define  FLASH_5752PAGE_SIZE_512	 0x10000000
@@ -1899,11 +1952,16 @@
 
 /* Alternate PCIE definitions */
 #define TG3_PCIE_TLDLPL_PORT		0x00007c00
+#define TG3_PCIE_DL_LO_FTSMAX		0x0000000c
+#define TG3_PCIE_DL_LO_FTSMAX_MSK	0x000000ff
+#define TG3_PCIE_DL_LO_FTSMAX_VAL	0x0000002c
 #define TG3_PCIE_PL_LO_PHYCTL1		 0x00000004
 #define TG3_PCIE_PL_LO_PHYCTL1_L1PLLPD_EN	  0x00001000
 #define TG3_PCIE_PL_LO_PHYCTL5		 0x00000014
 #define TG3_PCIE_PL_LO_PHYCTL5_DIS_L2CLKREQ	  0x80000000
 
+#define TG3_REG_BLK_SIZE		0x00008000
+
 /* OTP bit definitions */
 #define TG3_OTP_AGCTGT_MASK		0x000000e0
 #define TG3_OTP_AGCTGT_SHIFT		1
@@ -1955,7 +2013,9 @@
 #define TG3_NVM_DIR_END			0x78
 #define TG3_NVM_DIRENT_SIZE		0xc
 #define TG3_NVM_DIRTYPE_SHIFT		24
+#define TG3_NVM_DIRTYPE_LENMSK		0x003fffff
 #define TG3_NVM_DIRTYPE_ASFINI		1
+#define TG3_NVM_DIRTYPE_EXTVPD		20
 #define TG3_NVM_PTREV_BCVER		0x94
 #define TG3_NVM_BCVER_MAJMSK		0x0000ff00
 #define TG3_NVM_BCVER_MAJSFT		8
@@ -2079,6 +2139,13 @@
 #define  NIC_SRAM_MBUF_POOL_BASE5705	0x00010000
 #define  NIC_SRAM_MBUF_POOL_SIZE5705	0x0000e000
 
+#define TG3_SRAM_RX_STD_BDCACHE_SIZE_5700	128
+#define TG3_SRAM_RX_STD_BDCACHE_SIZE_5755	64
+#define TG3_SRAM_RX_STD_BDCACHE_SIZE_5906	32
+
+#define TG3_SRAM_RX_JMB_BDCACHE_SIZE_5700	64
+#define TG3_SRAM_RX_JMB_BDCACHE_SIZE_5717	16
+
 
 /* Currently this is fixed. */
 #define TG3_PHY_MII_ADDR		0x01
@@ -2119,7 +2186,7 @@
 #define  MII_TG3_DSP_TAP26_OPCSINPT	0x0004
 #define MII_TG3_DSP_AADJ1CH0		0x001f
 #define MII_TG3_DSP_CH34TP2		0x4022
-#define MII_TG3_DSP_CH34TP2_HIBW01	0x0010
+#define MII_TG3_DSP_CH34TP2_HIBW01	0x017b
 #define MII_TG3_DSP_AADJ1CH3		0x601f
 #define  MII_TG3_DSP_AADJ1CH3_ADCCKADJ	0x0002
 #define MII_TG3_DSP_EXP1_INT_STAT	0x0f01
@@ -2130,23 +2197,30 @@
 #define MII_TG3_DSP_EXP96		0x0f96
 #define MII_TG3_DSP_EXP97		0x0f97
 
-#define MII_TG3_AUX_CTRL		0x18 /* auxilliary control register */
+#define MII_TG3_AUX_CTRL		0x18 /* auxiliary control register */
+
+#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL	0x0000
+#define MII_TG3_AUXCTL_ACTL_TX_6DB	0x0400
+#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA	0x0800
+#define MII_TG3_AUXCTL_ACTL_EXTPKTLEN	0x4000
 
+#define MII_TG3_AUXCTL_SHDWSEL_PWRCTL	0x0002
+#define MII_TG3_AUXCTL_PCTL_WOL_EN	0x0008
 #define MII_TG3_AUXCTL_PCTL_100TX_LPWR	0x0010
 #define MII_TG3_AUXCTL_PCTL_SPR_ISOLATE	0x0020
+#define MII_TG3_AUXCTL_PCTL_CL_AB_TXDAC	0x0040
 #define MII_TG3_AUXCTL_PCTL_VREG_11V	0x0180
-#define MII_TG3_AUXCTL_SHDWSEL_PWRCTL	0x0002
 
-#define MII_TG3_AUXCTL_MISC_WREN	0x8000
-#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX	0x0200
-#define MII_TG3_AUXCTL_MISC_RDSEL_MISC	0x7000
+#define MII_TG3_AUXCTL_SHDWSEL_MISCTEST	0x0004
+
 #define MII_TG3_AUXCTL_SHDWSEL_MISC	0x0007
+#define MII_TG3_AUXCTL_MISC_WIRESPD_EN	0x0010
+#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX	0x0200
+#define MII_TG3_AUXCTL_MISC_RDSEL_SHIFT	12
+#define MII_TG3_AUXCTL_MISC_WREN	0x8000
 
-#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA	0x0800
-#define MII_TG3_AUXCTL_ACTL_TX_6DB	0x0400
-#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL	0x0000
 
-#define MII_TG3_AUX_STAT		0x19 /* auxilliary status register */
+#define MII_TG3_AUX_STAT		0x19 /* auxiliary status register */
 #define MII_TG3_AUX_STAT_LPASS		0x0004
 #define MII_TG3_AUX_STAT_SPDMASK	0x0700
 #define MII_TG3_AUX_STAT_10HALF		0x0100
@@ -2564,7 +2638,12 @@ struct tg3_hw_stats {
 	tg3_stat64_t			nic_avoided_irqs;
 	tg3_stat64_t			nic_tx_threshold_hit;
 
-	u8				__reserved4[0xb00-0x9c0];
+	/* NOT a part of the hardware statistics block format.
+	 * These stats are here as storage for tg3_periodic_fetch_stats().
+	 */
+	tg3_stat64_t			mbuf_lwm_thresh_hit;
+
+	u8				__reserved4[0xb00-0x9c8];
 };
 
 /* 'mapping' is superfluous as the chip does not write into
@@ -2696,6 +2775,8 @@ struct tg3_ethtool_stats {
 	u64		nic_irqs;
 	u64		nic_avoided_irqs;
 	u64		nic_tx_threshold_hit;
+
+	u64		mbuf_lwm_thresh_hit;
 };
 
 struct tg3_rx_prodring_set {
@@ -2745,6 +2826,86 @@ struct tg3_napi {
 	unsigned int			irq_vec;
 };
 
+enum TG3_FLAGS {
+	TG3_FLAG_TAGGED_STATUS = 0,
+	TG3_FLAG_TXD_MBOX_HWBUG,
+	TG3_FLAG_USE_LINKCHG_REG,
+	TG3_FLAG_ERROR_PROCESSED,
+	TG3_FLAG_ENABLE_ASF,
+	TG3_FLAG_ASPM_WORKAROUND,
+	TG3_FLAG_POLL_SERDES,
+	TG3_FLAG_MBOX_WRITE_REORDER,
+	TG3_FLAG_PCIX_TARGET_HWBUG,
+	TG3_FLAG_WOL_SPEED_100MB,
+	TG3_FLAG_WOL_ENABLE,
+	TG3_FLAG_EEPROM_WRITE_PROT,
+	TG3_FLAG_NVRAM,
+	TG3_FLAG_NVRAM_BUFFERED,
+	TG3_FLAG_SUPPORT_MSI,
+	TG3_FLAG_SUPPORT_MSIX,
+	TG3_FLAG_PCIX_MODE,
+	TG3_FLAG_PCI_HIGH_SPEED,
+	TG3_FLAG_PCI_32BIT,
+	TG3_FLAG_SRAM_USE_CONFIG,
+	TG3_FLAG_TX_RECOVERY_PENDING,
+	TG3_FLAG_WOL_CAP,
+	TG3_FLAG_JUMBO_RING_ENABLE,
+	TG3_FLAG_PAUSE_AUTONEG,
+	TG3_FLAG_CPMU_PRESENT,
+	TG3_FLAG_40BIT_DMA_BUG,
+	TG3_FLAG_BROKEN_CHECKSUMS,
+	TG3_FLAG_JUMBO_CAPABLE,
+	TG3_FLAG_CHIP_RESETTING,
+	TG3_FLAG_INIT_COMPLETE,
+	TG3_FLAG_RESTART_TIMER,
+	TG3_FLAG_TSO_BUG,
+	TG3_FLAG_IS_5788,
+	TG3_FLAG_MAX_RXPEND_64,
+	TG3_FLAG_TSO_CAPABLE,
+	TG3_FLAG_PCI_EXPRESS,
+	TG3_FLAG_ASF_NEW_HANDSHAKE,
+	TG3_FLAG_HW_AUTONEG,
+	TG3_FLAG_IS_NIC,
+	TG3_FLAG_FLASH,
+	TG3_FLAG_HW_TSO_1,
+	TG3_FLAG_5705_PLUS,
+	TG3_FLAG_5750_PLUS,
+	TG3_FLAG_HW_TSO_3,
+	TG3_FLAG_USING_MSI,
+	TG3_FLAG_USING_MSIX,
+	TG3_FLAG_ICH_WORKAROUND,
+	TG3_FLAG_5780_CLASS,
+	TG3_FLAG_HW_TSO_2,
+	TG3_FLAG_1SHOT_MSI,
+	TG3_FLAG_NO_FWARE_REPORTED,
+	TG3_FLAG_NO_NVRAM_ADDR_TRANS,
+	TG3_FLAG_ENABLE_APE,
+	TG3_FLAG_PROTECTED_NVRAM,
+	TG3_FLAG_5701_DMA_BUG,
+	TG3_FLAG_USE_PHYLIB,
+	TG3_FLAG_MDIOBUS_INITED,
+	TG3_FLAG_LRG_PROD_RING_CAP,
+	TG3_FLAG_RGMII_INBAND_DISABLE,
+	TG3_FLAG_RGMII_EXT_IBND_RX_EN,
+	TG3_FLAG_RGMII_EXT_IBND_TX_EN,
+	TG3_FLAG_CLKREQ_BUG,
+	TG3_FLAG_5755_PLUS,
+	TG3_FLAG_NO_NVRAM,
+	TG3_FLAG_ENABLE_RSS,
+	TG3_FLAG_ENABLE_TSS,
+	TG3_FLAG_4G_DMA_BNDRY_BUG,
+	TG3_FLAG_40BIT_DMA_LIMIT_BUG,
+	TG3_FLAG_SHORT_DMA_BUG,
+	TG3_FLAG_USE_JUMBO_BDFLAG,
+	TG3_FLAG_L1PLLPD_EN,
+	TG3_FLAG_57765_PLUS,
+	TG3_FLAG_APE_HAS_NCSI,
+	TG3_FLAG_5717_PLUS,
+
+	/* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
+	TG3_FLAG_NUMBER_OF_FLAGS,	/* Last entry in enum TG3_FLAGS */
+};
+
 struct tg3 {
 	/* begin "general, frequently-used members" cacheline section */
 
@@ -2768,7 +2929,7 @@ struct tg3 {
 	/* SMP locking strategy:
 	 *
 	 * lock: Held during reset, PHY access, timer, and when
-	 *       updating tg3_flags and tg3_flags2.
+	 *       updating tg3_flags.
 	 *
 	 * netif_tx_lock: Held during tg3_start_xmit. tg3_tx holds
 	 *                netif_tx_lock when it needs to call
@@ -2825,94 +2986,13 @@ struct tg3 {
 	struct tg3_ethtool_stats	estats;
 	struct tg3_ethtool_stats	estats_prev;
 
+	DECLARE_BITMAP(tg3_flags, TG3_FLAG_NUMBER_OF_FLAGS);
+
 	union {
 	unsigned long			phy_crc_errors;
 	unsigned long			last_event_jiffies;
 	};
 
-	u32				tg3_flags;
-#define TG3_FLAG_TAGGED_STATUS		0x00000001
-#define TG3_FLAG_TXD_MBOX_HWBUG		0x00000002
-#define TG3_FLAG_RX_CHECKSUMS		0x00000004
-#define TG3_FLAG_USE_LINKCHG_REG	0x00000008
-#define TG3_FLAG_ENABLE_ASF		0x00000020
-#define TG3_FLAG_ASPM_WORKAROUND	0x00000040
-#define TG3_FLAG_POLL_SERDES		0x00000080
-#define TG3_FLAG_MBOX_WRITE_REORDER	0x00000100
-#define TG3_FLAG_PCIX_TARGET_HWBUG	0x00000200
-#define TG3_FLAG_WOL_SPEED_100MB	0x00000400
-#define TG3_FLAG_WOL_ENABLE		0x00000800
-#define TG3_FLAG_EEPROM_WRITE_PROT	0x00001000
-#define TG3_FLAG_NVRAM			0x00002000
-#define TG3_FLAG_NVRAM_BUFFERED		0x00004000
-#define TG3_FLAG_SUPPORT_MSI		0x00008000
-#define TG3_FLAG_SUPPORT_MSIX		0x00010000
-#define TG3_FLAG_SUPPORT_MSI_OR_MSIX	(TG3_FLAG_SUPPORT_MSI | \
-					 TG3_FLAG_SUPPORT_MSIX)
-#define TG3_FLAG_PCIX_MODE		0x00020000
-#define TG3_FLAG_PCI_HIGH_SPEED		0x00040000
-#define TG3_FLAG_PCI_32BIT		0x00080000
-#define TG3_FLAG_SRAM_USE_CONFIG	0x00100000
-#define TG3_FLAG_TX_RECOVERY_PENDING	0x00200000
-#define TG3_FLAG_WOL_CAP		0x00400000
-#define TG3_FLAG_JUMBO_RING_ENABLE	0x00800000
-#define TG3_FLAG_PAUSE_AUTONEG		0x02000000
-#define TG3_FLAG_CPMU_PRESENT		0x04000000
-#define TG3_FLAG_40BIT_DMA_BUG		0x08000000
-#define TG3_FLAG_BROKEN_CHECKSUMS	0x10000000
-#define TG3_FLAG_JUMBO_CAPABLE		0x20000000
-#define TG3_FLAG_CHIP_RESETTING		0x40000000
-#define TG3_FLAG_INIT_COMPLETE		0x80000000
-	u32				tg3_flags2;
-#define TG3_FLG2_RESTART_TIMER		0x00000001
-#define TG3_FLG2_TSO_BUG		0x00000002
-#define TG3_FLG2_IS_5788		0x00000008
-#define TG3_FLG2_MAX_RXPEND_64		0x00000010
-#define TG3_FLG2_TSO_CAPABLE		0x00000020
-#define TG3_FLG2_PCI_EXPRESS		0x00000200
-#define TG3_FLG2_ASF_NEW_HANDSHAKE	0x00000400
-#define TG3_FLG2_HW_AUTONEG		0x00000800
-#define TG3_FLG2_IS_NIC			0x00001000
-#define TG3_FLG2_FLASH			0x00008000
-#define TG3_FLG2_HW_TSO_1		0x00010000
-#define TG3_FLG2_5705_PLUS		0x00040000
-#define TG3_FLG2_5750_PLUS		0x00080000
-#define TG3_FLG2_HW_TSO_3		0x00100000
-#define TG3_FLG2_USING_MSI		0x00200000
-#define TG3_FLG2_USING_MSIX		0x00400000
-#define TG3_FLG2_USING_MSI_OR_MSIX	(TG3_FLG2_USING_MSI | \
-					TG3_FLG2_USING_MSIX)
-#define TG3_FLG2_ICH_WORKAROUND		0x02000000
-#define TG3_FLG2_5780_CLASS		0x04000000
-#define TG3_FLG2_HW_TSO_2		0x08000000
-#define TG3_FLG2_HW_TSO			(TG3_FLG2_HW_TSO_1 | \
-					 TG3_FLG2_HW_TSO_2 | \
-					 TG3_FLG2_HW_TSO_3)
-#define TG3_FLG2_1SHOT_MSI		0x10000000
-#define TG3_FLG2_NO_FWARE_REPORTED	0x40000000
-	u32				tg3_flags3;
-#define TG3_FLG3_NO_NVRAM_ADDR_TRANS	0x00000001
-#define TG3_FLG3_ENABLE_APE		0x00000002
-#define TG3_FLG3_PROTECTED_NVRAM	0x00000004
-#define TG3_FLG3_5701_DMA_BUG		0x00000008
-#define TG3_FLG3_USE_PHYLIB		0x00000010
-#define TG3_FLG3_MDIOBUS_INITED		0x00000020
-#define TG3_FLG3_RGMII_INBAND_DISABLE	0x00000100
-#define TG3_FLG3_RGMII_EXT_IBND_RX_EN	0x00000200
-#define TG3_FLG3_RGMII_EXT_IBND_TX_EN	0x00000400
-#define TG3_FLG3_CLKREQ_BUG		0x00000800
-#define TG3_FLG3_5755_PLUS		0x00002000
-#define TG3_FLG3_NO_NVRAM		0x00004000
-#define TG3_FLG3_ENABLE_RSS		0x00020000
-#define TG3_FLG3_ENABLE_TSS		0x00040000
-#define TG3_FLG3_4G_DMA_BNDRY_BUG	0x00080000
-#define TG3_FLG3_40BIT_DMA_LIMIT_BUG	0x00100000
-#define TG3_FLG3_SHORT_DMA_BUG		0x00200000
-#define TG3_FLG3_USE_JUMBO_BDFLAG	0x00400000
-#define TG3_FLG3_L1PLLPD_EN		0x00800000
-#define TG3_FLG3_5717_PLUS		0x01000000
-#define TG3_FLG3_APE_HAS_NCSI		0x02000000
-
 	struct timer_list		timer;
 	u16				timer_counter;
 	u16				timer_multiplier;
@@ -2983,6 +3063,7 @@ struct tg3 {
 #define TG3_PHY_ID_BCM5718S		0xbc050ff0
 #define TG3_PHY_ID_BCM57765		0x5c0d8a40
 #define TG3_PHY_ID_BCM5719C		0x5c0d8a20
+#define TG3_PHY_ID_BCM5720C		0x5c0d8b60
 #define TG3_PHY_ID_BCM5906		0xdc00ac40
 #define TG3_PHY_ID_BCM8002		0x60010140
 #define TG3_PHY_ID_INVALID		0xffffffff
@@ -3049,6 +3130,7 @@ struct tg3 {
 
 	int				nvram_lock_cnt;
 	u32				nvram_size;
+#define TG3_NVRAM_SIZE_2KB		0x00000800
 #define TG3_NVRAM_SIZE_64KB		0x00010000
 #define TG3_NVRAM_SIZE_128KB		0x00020000
 #define TG3_NVRAM_SIZE_256KB		0x00040000
@@ -3064,6 +3146,9 @@ struct tg3 {
 #define JEDEC_SAIFUN			0x4f
 #define JEDEC_SST			0xbf
 
+#define ATMEL_AT24C02_CHIP_SIZE		TG3_NVRAM_SIZE_2KB
+#define ATMEL_AT24C02_PAGE_SIZE		(8)
+
 #define ATMEL_AT24C64_CHIP_SIZE		TG3_NVRAM_SIZE_64KB
 #define ATMEL_AT24C64_PAGE_SIZE		(32)
 
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
index 0825db6d883..1e980fdd9d7 100644
--- a/drivers/net/tile/tilepro.c
+++ b/drivers/net/tile/tilepro.c
@@ -1930,7 +1930,7 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
 	unsigned int len = skb->len;
 	unsigned char *data = skb->data;
 
-	unsigned int csum_start = skb->csum_start - skb_headroom(skb);
+	unsigned int csum_start = skb_checksum_start_offset(skb);
 
 	lepp_frag_t frags[LEPP_MAX_FRAGS];
 
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 10800f16a23..ff32befd844 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -208,7 +208,7 @@ static void print_rx_state(struct net_device *dev)
  *	passing/getting the next value from the nic. As with all requests
  *	on this nic it has to be done in two stages, a) tell the nic which
  *	memory address you want to access and b) pass/get the value from the nic.
- *	With the EEProm, you have to wait before and inbetween access a) and b).
+ *	With the EEProm, you have to wait before and between access a) and b).
  *	As this is only read at initialization time and the wait period is very 
  *	small we shouldn't have to worry about scheduling issues.
  */
@@ -1251,7 +1251,7 @@ static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev)
 /* 
  * The NIC has told us that a packet has been downloaded onto the card, we must
  * find out which packet it has done, clear the skb and information for the packet
- * then advance around the ring for all tranmitted packets
+ * then advance around the ring for all transmitted packets
  */
 
 static void xl_dn_comp(struct net_device *dev) 
@@ -1568,7 +1568,7 @@ static void xl_arb_cmd(struct net_device *dev)
 			if (lan_status_diff & LSC_SOFT_ERR)
 					printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
 			if (lan_status_diff & LSC_TRAN_BCN) 
-					printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
+					printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name);
 			if (lan_status_diff & LSC_SS) 
 					printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
 			if (lan_status_diff & LSC_RING_REC)
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 5bd14070453..9354ca9da57 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -1675,7 +1675,7 @@ drop_frame:
 			if (lan_status_diff & LSC_SOFT_ERR)
 				printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n", dev->name);
 			if (lan_status_diff & LSC_TRAN_BCN)
-				printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n", dev->name);
+				printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n", dev->name);
 			if (lan_status_diff & LSC_SS)
 				printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
 			if (lan_status_diff & LSC_RING_REC)
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 785ad1a2157..1313aa1315f 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -73,7 +73,7 @@ static void madgemc_setint(struct net_device *dev, int val);
 static irqreturn_t madgemc_interrupt(int irq, void *dev_id);
 
 /*
- * These work around paging, however they don't guarentee you're on the
+ * These work around paging, however they don't guarantee you're on the
  * right page.
  */
 #define SIFREADB(reg) (inb(dev->base_addr + ((reg<0x8)?reg:reg-0x8)))
@@ -387,7 +387,7 @@ getout:
  * both with their own disadvantages...
  *
  * 1)  	Read in the SIFSTS register from the TMS controller.  This
- *	is guarenteed to be accurate, however, there's a fairly
+ *	is guaranteed to be accurate, however, there's a fairly
  *	large performance penalty for doing so: the Madge chips
  *	must request the register from the Eagle, the Eagle must
  *	read them from its internal bus, and then take the route
@@ -454,7 +454,7 @@ static irqreturn_t madgemc_interrupt(int irq, void *dev_id)
 }
 
 /*
- * Set the card to the prefered ring speed.
+ * Set the card to the preferred ring speed.
  *
  * Unlike newer cards, the MC16/32 have their speed selection
  * circuit connected to the Madge ASICs and not to the TMS380
@@ -727,7 +727,7 @@ static int __devexit madgemc_remove(struct device *device)
 	return 0;
 }
 
-static short madgemc_adapter_ids[] __initdata = {
+static const short madgemc_adapter_ids[] __devinitconst = {
 	0x002d,
 	0x0000
 };
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 3d2fbe60b46..e3855aeb13d 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -86,6 +86,7 @@
 #include <linux/timer.h>
 #include <linux/in.h>
 #include <linux/ioport.h>
+#include <linux/seq_file.h>
 #include <linux/string.h>
 #include <linux/proc_fs.h>
 #include <linux/ptrace.h>
@@ -193,7 +194,7 @@ static void olympic_arb_cmd(struct net_device *dev);
 static int olympic_change_mtu(struct net_device *dev, int mtu);
 static void olympic_srb_bh(struct net_device *dev) ; 
 static void olympic_asb_bh(struct net_device *dev) ; 
-static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) ; 
+static const struct file_operations olympic_proc_ops;
 
 static const struct net_device_ops olympic_netdev_ops = {
 	.ndo_open		= olympic_open,
@@ -272,7 +273,7 @@ static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device
 		char proc_name[20] ; 
 		strcpy(proc_name,"olympic_") ;
 		strcat(proc_name,dev->name) ; 
-		create_proc_read_entry(proc_name,0,init_net.proc_net,olympic_proc_info,(void *)dev) ;
+		proc_create_data(proc_name, 0, init_net.proc_net, &olympic_proc_ops, dev);
 		printk("Olympic: Network Monitor information: /proc/%s\n",proc_name); 
 	}
 	return  0 ;
@@ -1500,7 +1501,7 @@ drop_frame:
 			if (lan_status_diff & LSC_SOFT_ERR)
 					printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
 			if (lan_status_diff & LSC_TRAN_BCN) 
-					printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
+					printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name);
 			if (lan_status_diff & LSC_SS) 
 					printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
 			if (lan_status_diff & LSC_RING_REC)
@@ -1615,29 +1616,25 @@ static int olympic_change_mtu(struct net_device *dev, int mtu)
 	return 0 ; 
 }
 
-static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+static int olympic_proc_show(struct seq_file *m, void *v)
 {
-	struct net_device *dev = (struct net_device *)data ; 
+	struct net_device *dev = m->private;
 	struct olympic_private *olympic_priv=netdev_priv(dev);
 	u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; 
 	u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; 
-	int size = 0 ; 
-	int len=0;
-	off_t begin=0;
-	off_t pos=0;
 	u8 addr[6];
 	u8 addr2[6];
 	int i;
 
-	size = sprintf(buffer, 
+	seq_printf(m,
 		"IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name);
-	size += sprintf(buffer+size, "\n%6s: Adapter Address   : Node Address      : Functional Addr\n",
+	seq_printf(m, "\n%6s: Adapter Address   : Node Address      : Functional Addr\n",
  	   dev->name); 
 
 	for (i = 0 ; i < 6 ; i++)
 		addr[i] = readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr) + i);
 
-	size += sprintf(buffer+size, "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n",
+	seq_printf(m, "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n",
 	   dev->name,
 	   dev->dev_addr, addr,
 	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), 
@@ -1645,9 +1642,9 @@ static int olympic_proc_info(char *buffer, char **start, off_t offset, int lengt
 	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
 	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
 	 
-	size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name);
+	seq_printf(m, "\n%6s: Token Ring Parameters Table:\n", dev->name);
 
-	size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address   : Poll Address      : AccPri : Auth Src : Att Code :\n",
+	seq_printf(m, "%6s: Physical Addr : Up Node Address   : Poll Address      : AccPri : Auth Src : Att Code :\n",
 	  dev->name) ; 
 
 	for (i = 0 ; i < 6 ; i++)
@@ -1655,7 +1652,7 @@ static int olympic_proc_info(char *buffer, char **start, off_t offset, int lengt
 	for (i = 0 ; i < 6 ; i++)
 		addr2[i] =  readb(opt+offsetof(struct olympic_parameters_table, poll_addr) + i);
 
-	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x   : %pM : %pM : %04x   : %04x     :  %04x    :\n",
+	seq_printf(m, "%6s: %02x:%02x:%02x:%02x   : %pM : %pM : %04x   : %04x     :  %04x    :\n",
 	  dev->name,
 	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)),
 	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1),
@@ -1666,12 +1663,12 @@ static int olympic_proc_info(char *buffer, char **start, off_t offset, int lengt
 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))),
 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code))));
 
-	size += sprintf(buffer+size, "%6s: Source Address    : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
+	seq_printf(m, "%6s: Source Address    : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
 	  dev->name) ; 
 	
 	for (i = 0 ; i < 6 ; i++)
 		addr[i] = readb(opt+offsetof(struct olympic_parameters_table, source_addr) + i);
-	size += sprintf(buffer+size, "%6s: %pM : %04x  : %04x   : %04x   : %04x   : %04x    :     %04x     : \n",
+	seq_printf(m, "%6s: %pM : %04x  : %04x   : %04x   : %04x   : %04x    :     %04x     : \n",
 	  dev->name, addr,
 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))),
 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))),
@@ -1680,12 +1677,12 @@ static int olympic_proc_info(char *buffer, char **start, off_t offset, int lengt
 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))),
 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl))));
 
-	size += sprintf(buffer+size, "%6s: Beacon Details :  Tx  :  Rx  : NAUN Node Address : NAUN Node Phys : \n",
+	seq_printf(m, "%6s: Beacon Details :  Tx  :  Rx  : NAUN Node Address : NAUN Node Phys : \n",
 	  dev->name) ; 
 
 	for (i = 0 ; i < 6 ; i++)
 		addr[i] = readb(opt+offsetof(struct olympic_parameters_table, beacon_naun) + i);
-	size += sprintf(buffer+size, "%6s:                :  %02x  :  %02x  : %pM : %02x:%02x:%02x:%02x    : \n",
+	seq_printf(m, "%6s:                :  %02x  :  %02x  : %pM : %02x:%02x:%02x:%02x    : \n",
 	  dev->name,
 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))),
 	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))),
@@ -1695,19 +1692,21 @@ static int olympic_proc_info(char *buffer, char **start, off_t offset, int lengt
 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2),
 	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3));
 
-	len=size;
-	pos=begin+size;
-	if (pos<offset) {
-		len=0;
-		begin=pos;
-	}
-	*start=buffer+(offset-begin);	/* Start of wanted data */
-	len-=(offset-begin);		/* Start slop */
-	if(len>length)
-		len=length;		/* Ending slop */
-	return len;
+	return 0;
 }
 
+static int olympic_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, olympic_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations olympic_proc_ops = {
+	.open		= olympic_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 static void __devexit olympic_remove_one(struct pci_dev *pdev) 
 {
 	struct net_device *dev = pci_get_drvdata(pdev) ; 
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 63db5a6762a..d9044aba7af 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -393,7 +393,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)
         tp->rx_bdb_end[NON_MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, 0);
 
         /* Allocate MAC transmit buffers.
-         * MAC Tx Buffers doen't have to be on an ODD Boundry.
+         * MAC Tx Buffers doen't have to be on an ODD Boundary.
          */
         tp->tx_buff_head[MAC_QUEUE]
                 = (__u16 *)smctr_malloc(dev, tp->tx_buff_size[MAC_QUEUE]);
@@ -415,7 +415,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)
 
         /* Allocate Non-MAC transmit buffers.
          * ?? For maximum Netware performance, put Tx Buffers on
-         * ODD Boundry and then restore malloc to Even Boundrys.
+         * ODD Boundary and then restore malloc to Even Boundrys.
          */
         smctr_malloc(dev, 1L);
         tp->tx_buff_head[NON_MAC_QUEUE]
@@ -1311,7 +1311,7 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev)
         mem_used += sizeof(BDBlock) * tp->num_rx_bdbs[MAC_QUEUE];
 
         /* Allocate MAC transmit buffers.
-         * MAC transmit buffers don't have to be on an ODD Boundry.
+         * MAC transmit buffers don't have to be on an ODD Boundary.
          */
         mem_used += tp->tx_buff_size[MAC_QUEUE];
 
@@ -1325,7 +1325,7 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev)
 
         /* Allocate Non-MAC transmit buffers.
          * For maximum Netware performance, put Tx Buffers on
-         * ODD Boundry,and then restore malloc to Even Boundrys.
+         * ODD Boundary,and then restore malloc to Even Boundrys.
          */
         mem_used += 1L;
         mem_used += tp->tx_buff_size[NON_MAC_QUEUE];
@@ -3069,8 +3069,8 @@ static int smctr_load_node_addr(struct net_device *dev)
  * disabled.!?
  *
  * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
- * has any multi-cast or promiscous bits set, the receive_mask needs to
- * be changed to clear the multi-cast or promiscous mode bits, the lobe_test
+ * has any multi-cast or promiscuous bits set, the receive_mask needs to
+ * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test
  * run, and then the receive mask set back to its original value if the test
  * is successful.
  */
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index 60b30ee38dc..e5a617c586c 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -442,7 +442,7 @@ typedef struct {
 #define PASS_FIRST_BUF_ONLY	0x0100	/* Passes only first internal buffer
 					 * of each received frame; FrameSize
 					 * of RPLs must contain internal
-					 * BUFFER_SIZE bits for promiscous mode.
+					 * BUFFER_SIZE bits for promiscuous mode.
 					 */
 #define ENABLE_FULL_DUPLEX_SELECTION	0x2000 
  					/* Enable the use of full-duplex
diff --git a/drivers/net/tsi108_eth.h b/drivers/net/tsi108_eth.h
index 5a77ae6c5f3..5fee7d78dc6 100644
--- a/drivers/net/tsi108_eth.h
+++ b/drivers/net/tsi108_eth.h
@@ -305,9 +305,9 @@
 #define TSI108_TX_CRC	(1 << 5)	/* Generate CRC for this packet */
 #define TSI108_TX_INT	(1 << 14)	/* Generate an IRQ after frag. processed */
 #define TSI108_TX_RETRY	(0xf << 16)	/* 4 bit field indicating num. of retries */
-#define TSI108_TX_COL	(1 << 20)	/* Set if a collision occured */
-#define TSI108_TX_LCOL	(1 << 24)	/* Set if a late collision occured */
-#define TSI108_TX_UNDER	(1 << 25)	/* Set if a FIFO underrun occured */
+#define TSI108_TX_COL	(1 << 20)	/* Set if a collision occurred */
+#define TSI108_TX_LCOL	(1 << 24)	/* Set if a late collision occurred */
+#define TSI108_TX_UNDER	(1 << 25)	/* Set if a FIFO underrun occurred */
 #define TSI108_TX_RLIM	(1 << 26)	/* Set if the retry limit was reached */
 #define TSI108_TX_OK	(1 << 30)	/* Set if the frame TX was successful */
 #define TSI108_TX_OWN	(1 << 31)	/* Set if the device owns the descriptor */
@@ -332,7 +332,7 @@ typedef struct {
 #define TSI108_RX_RUNT	(1 << 4)/* Packet is less than minimum size */
 #define TSI108_RX_HASH	(1 << 7)/* Hash table match */
 #define TSI108_RX_BAD	(1 << 8)	/* Bad frame */
-#define TSI108_RX_OVER	(1 << 9)	/* FIFO overrun occured */
+#define TSI108_RX_OVER	(1 << 9)	/* FIFO overrun occurred */
 #define TSI108_RX_TRUNC	(1 << 11)	/* Packet truncated due to excess length */
 #define TSI108_RX_CRC	(1 << 12)	/* Packet had a CRC error */
 #define TSI108_RX_INT	(1 << 13)	/* Generate an IRQ after frag. processed */
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 007d8e75666..092c3faa882 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -122,8 +122,8 @@ void t21142_start_nway(struct net_device *dev)
 	tp->nway = tp->mediasense = 1;
 	tp->nwayset = tp->lpar = 0;
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: Restarting 21143 autonegotiation, csr14=%08x\n",
-		       dev->name, csr14);
+		netdev_dbg(dev, "Restarting 21143 autonegotiation, csr14=%08x\n",
+			   csr14);
 	iowrite32(0x0001, ioaddr + CSR13);
 	udelay(100);
 	iowrite32(csr14, ioaddr + CSR14);
@@ -206,14 +206,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5)
 #if 0							/* Restart shouldn't be needed. */
 		iowrite32(tp->csr6 | RxOn, ioaddr + CSR6);
 		if (tulip_debug > 2)
-			printk(KERN_DEBUG "%s:  Restarting Tx and Rx, CSR5 is %08x\n",
-			       dev->name, ioread32(ioaddr + CSR5));
+			netdev_dbg(dev, " Restarting Tx and Rx, CSR5 is %08x\n",
+				   ioread32(ioaddr + CSR5));
 #endif
 		tulip_start_rxtx(tp);
 		if (tulip_debug > 2)
-			printk(KERN_DEBUG "%s:  Setting CSR6 %08x/%x CSR12 %08x\n",
-			       dev->name, tp->csr6, ioread32(ioaddr + CSR6),
-			       ioread32(ioaddr + CSR12));
+			netdev_dbg(dev, " Setting CSR6 %08x/%x CSR12 %08x\n",
+				   tp->csr6, ioread32(ioaddr + CSR6),
+				   ioread32(ioaddr + CSR12));
 	} else if ((tp->nwayset  &&  (csr5 & 0x08000000) &&
 		    (dev->if_port == 3  ||  dev->if_port == 5) &&
 		    (csr12 & 2) == 2) ||
diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile
index 200cbf7c815..5e8be38b45b 100644
--- a/drivers/net/tulip/Makefile
+++ b/drivers/net/tulip/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the Linux "Tulip" family network device drivers.
 #
 
+ccflags-$(CONFIG_NET_TULIP)	:= -DDEBUG
+
 obj-$(CONFIG_PCMCIA_XIRCOM)	+= xircom_cb.o
 obj-$(CONFIG_DM9102)		+= dmfe.o
 obj-$(CONFIG_WINBOND_840)	+= winbond-840.o
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index b13c6b040be..e2f69235118 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -27,6 +27,8 @@
 
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME		"de2104x"
 #define DRV_VERSION		"0.7"
 #define DRV_RELDATE		"Mar 17, 2004"
@@ -51,7 +53,7 @@
 
 /* These identify the driver base version and may not be removed. */
 static char version[] =
-KERN_INFO DRV_NAME " PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
+"PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")";
 
 MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
 MODULE_DESCRIPTION("Intel/Digital 21040/1 series PCI Ethernet driver");
@@ -73,8 +75,6 @@ static int rx_copybreak = 100;
 module_param (rx_copybreak, int, 0);
 MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copied");
 
-#define PFX			DRV_NAME ": "
-
 #define DE_DEF_MSG_ENABLE	(NETIF_MSG_DRV		| \
 				 NETIF_MSG_PROBE 	| \
 				 NETIF_MSG_LINK		| \
@@ -377,18 +377,16 @@ static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
 static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
 			    u32 status, u32 len)
 {
-	if (netif_msg_rx_err (de))
-		printk (KERN_DEBUG
-			"%s: rx err, slot %d status 0x%x len %d\n",
-			de->dev->name, rx_tail, status, len);
+	netif_dbg(de, rx_err, de->dev,
+		  "rx err, slot %d status 0x%x len %d\n",
+		  rx_tail, status, len);
 
 	if ((status & 0x38000300) != 0x0300) {
 		/* Ingore earlier buffers. */
 		if ((status & 0xffff) != 0x7fff) {
-			if (netif_msg_rx_err(de))
-				dev_warn(&de->dev->dev,
-					 "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
-					 status);
+			netif_warn(de, rx_err, de->dev,
+				   "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+				   status);
 			de->net_stats.rx_length_errors++;
 		}
 	} else if (status & RxError) {
@@ -435,10 +433,9 @@ static void de_rx (struct de_private *de)
 
 		copying_skb = (len <= rx_copybreak);
 
-		if (unlikely(netif_msg_rx_status(de)))
-			printk(KERN_DEBUG "%s: rx slot %d status 0x%x len %d copying? %d\n",
-			       de->dev->name, rx_tail, status, len,
-			       copying_skb);
+		netif_dbg(de, rx_status, de->dev,
+			  "rx slot %d status 0x%x len %d copying? %d\n",
+			  rx_tail, status, len, copying_skb);
 
 		buflen = copying_skb ? (len + RX_OFFSET) : de->rx_buf_sz;
 		copy_skb = dev_alloc_skb (buflen);
@@ -491,7 +488,7 @@ rx_next:
 	}
 
 	if (!rx_work)
-		dev_warn(&de->dev->dev, "rx work limit reached\n");
+		netdev_warn(de->dev, "rx work limit reached\n");
 
 	de->rx_tail = rx_tail;
 }
@@ -506,10 +503,9 @@ static irqreturn_t de_interrupt (int irq, void *dev_instance)
 	if ((!(status & (IntrOK|IntrErr))) || (status == 0xFFFF))
 		return IRQ_NONE;
 
-	if (netif_msg_intr(de))
-		printk(KERN_DEBUG "%s: intr, status %08x mode %08x desc %u/%u/%u\n",
-		       dev->name, status, dr32(MacMode),
-		       de->rx_tail, de->tx_head, de->tx_tail);
+	netif_dbg(de, intr, dev, "intr, status %08x mode %08x desc %u/%u/%u\n",
+		  status, dr32(MacMode),
+		  de->rx_tail, de->tx_head, de->tx_tail);
 
 	dw32(MacStatus, status);
 
@@ -534,9 +530,9 @@ static irqreturn_t de_interrupt (int irq, void *dev_instance)
 
 		pci_read_config_word(de->pdev, PCI_STATUS, &pci_status);
 		pci_write_config_word(de->pdev, PCI_STATUS, pci_status);
-		dev_err(&de->dev->dev,
-			"PCI bus error, status=%08x, PCI status=%04x\n",
-			status, pci_status);
+		netdev_err(de->dev,
+			   "PCI bus error, status=%08x, PCI status=%04x\n",
+			   status, pci_status);
 	}
 
 	return IRQ_HANDLED;
@@ -572,9 +568,9 @@ static void de_tx (struct de_private *de)
 
 		if (status & LastFrag) {
 			if (status & TxError) {
-				if (netif_msg_tx_err(de))
-					printk(KERN_DEBUG "%s: tx err, status 0x%x\n",
-					       de->dev->name, status);
+				netif_dbg(de, tx_err, de->dev,
+					  "tx err, status 0x%x\n",
+					  status);
 				de->net_stats.tx_errors++;
 				if (status & TxOWC)
 					de->net_stats.tx_window_errors++;
@@ -587,9 +583,8 @@ static void de_tx (struct de_private *de)
 			} else {
 				de->net_stats.tx_packets++;
 				de->net_stats.tx_bytes += skb->len;
-				if (netif_msg_tx_done(de))
-					printk(KERN_DEBUG "%s: tx done, slot %d\n",
-					       de->dev->name, tx_tail);
+				netif_dbg(de, tx_done, de->dev,
+					  "tx done, slot %d\n", tx_tail);
 			}
 			dev_kfree_skb_irq(skb);
 		}
@@ -646,9 +641,8 @@ static netdev_tx_t de_start_xmit (struct sk_buff *skb,
 	wmb();
 
 	de->tx_head = NEXT_TX(entry);
-	if (netif_msg_tx_queued(de))
-		printk(KERN_DEBUG "%s: tx queued, slot %d, skblen %d\n",
-		       dev->name, entry, skb->len);
+	netif_dbg(de, tx_queued, dev, "tx queued, slot %d, skblen %d\n",
+		  entry, skb->len);
 
 	if (tx_free == 0)
 		netif_stop_queue(dev);
@@ -873,7 +867,7 @@ static void de_stop_rxtx (struct de_private *de)
 		udelay(100);
 	}
 
-	dev_warn(&de->dev->dev, "timeout expired stopping DMA\n");
+	netdev_warn(de->dev, "timeout expired, stopping DMA\n");
 }
 
 static inline void de_start_rxtx (struct de_private *de)
@@ -907,9 +901,8 @@ static void de_link_up(struct de_private *de)
 {
 	if (!netif_carrier_ok(de->dev)) {
 		netif_carrier_on(de->dev);
-		if (netif_msg_link(de))
-			dev_info(&de->dev->dev, "link up, media %s\n",
-				 media_name[de->media_type]);
+		netif_info(de, link, de->dev, "link up, media %s\n",
+			   media_name[de->media_type]);
 	}
 }
 
@@ -917,8 +910,7 @@ static void de_link_down(struct de_private *de)
 {
 	if (netif_carrier_ok(de->dev)) {
 		netif_carrier_off(de->dev);
-		if (netif_msg_link(de))
-			dev_info(&de->dev->dev, "link down\n");
+		netif_info(de, link, de->dev, "link down\n");
 	}
 }
 
@@ -928,8 +920,7 @@ static void de_set_media (struct de_private *de)
 	u32 macmode = dr32(MacMode);
 
 	if (de_is_running(de))
-		dev_warn(&de->dev->dev,
-			 "chip is running while changing media!\n");
+		netdev_warn(de->dev, "chip is running while changing media!\n");
 
 	if (de->de21040)
 		dw32(CSR11, FULL_DUPLEX_MAGIC);
@@ -948,18 +939,13 @@ static void de_set_media (struct de_private *de)
 	else
 		macmode &= ~FullDuplex;
 
-	if (netif_msg_link(de))
-		dev_info(&de->dev->dev, "set link %s\n", media_name[media]);
-	if (netif_msg_hw(de)) {
-		dev_info(&de->dev->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n",
-			 dr32(MacMode), dr32(SIAStatus),
-			 dr32(CSR13), dr32(CSR14), dr32(CSR15));
-
-		dev_info(&de->dev->dev,
-			 "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
-			 macmode, de->media[media].csr13,
-			 de->media[media].csr14, de->media[media].csr15);
-	}
+	netif_info(de, link, de->dev, "set link %s\n", media_name[media]);
+	netif_info(de, hw, de->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n",
+		   dr32(MacMode), dr32(SIAStatus),
+		   dr32(CSR13), dr32(CSR14), dr32(CSR15));
+	netif_info(de, hw, de->dev, "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+		   macmode, de->media[media].csr13,
+		   de->media[media].csr14, de->media[media].csr15);
 	if (macmode != dr32(MacMode))
 		dw32(MacMode, macmode);
 }
@@ -996,9 +982,8 @@ static void de21040_media_timer (unsigned long data)
 		if (!netif_carrier_ok(dev))
 			de_link_up(de);
 		else
-			if (netif_msg_timer(de))
-				dev_info(&dev->dev, "%s link ok, status %x\n",
-					 media_name[de->media_type], status);
+			netif_info(de, timer, dev, "%s link ok, status %x\n",
+				   media_name[de->media_type], status);
 		return;
 	}
 
@@ -1025,9 +1010,8 @@ no_link_yet:
 	de->media_timer.expires = jiffies + DE_TIMER_NO_LINK;
 	add_timer(&de->media_timer);
 
-	if (netif_msg_timer(de))
-		dev_info(&dev->dev, "no link, trying media %s, status %x\n",
-			 media_name[de->media_type], status);
+	netif_info(de, timer, dev, "no link, trying media %s, status %x\n",
+		   media_name[de->media_type], status);
 }
 
 static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media)
@@ -1085,11 +1069,10 @@ static void de21041_media_timer (unsigned long data)
 		if (!netif_carrier_ok(dev))
 			de_link_up(de);
 		else
-			if (netif_msg_timer(de))
-				dev_info(&dev->dev,
-					 "%s link ok, mode %x status %x\n",
-					 media_name[de->media_type],
-					 dr32(MacMode), status);
+			netif_info(de, timer, dev,
+				   "%s link ok, mode %x status %x\n",
+				   media_name[de->media_type],
+				   dr32(MacMode), status);
 		return;
 	}
 
@@ -1163,9 +1146,8 @@ no_link_yet:
 	de->media_timer.expires = jiffies + DE_TIMER_NO_LINK;
 	add_timer(&de->media_timer);
 
-	if (netif_msg_timer(de))
-		dev_info(&dev->dev, "no link, trying media %s, status %x\n",
-			 media_name[de->media_type], status);
+	netif_info(de, timer, dev, "no link, trying media %s, status %x\n",
+		   media_name[de->media_type], status);
 }
 
 static void de_media_interrupt (struct de_private *de, u32 status)
@@ -1401,14 +1383,13 @@ static int de_open (struct net_device *dev)
 	struct de_private *de = netdev_priv(dev);
 	int rc;
 
-	if (netif_msg_ifup(de))
-		printk(KERN_DEBUG "%s: enabling interface\n", dev->name);
+	netif_dbg(de, ifup, dev, "enabling interface\n");
 
 	de->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
 
 	rc = de_alloc_rings(de);
 	if (rc) {
-		dev_err(&dev->dev, "ring allocation failure, err=%d\n", rc);
+		netdev_err(dev, "ring allocation failure, err=%d\n", rc);
 		return rc;
 	}
 
@@ -1416,14 +1397,14 @@ static int de_open (struct net_device *dev)
 
 	rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev);
 	if (rc) {
-		dev_err(&dev->dev, "IRQ %d request failure, err=%d\n",
-			dev->irq, rc);
+		netdev_err(dev, "IRQ %d request failure, err=%d\n",
+			   dev->irq, rc);
 		goto err_out_free;
 	}
 
 	rc = de_init_hw(de);
 	if (rc) {
-		dev_err(&dev->dev, "h/w init failure, err=%d\n", rc);
+		netdev_err(dev, "h/w init failure, err=%d\n", rc);
 		goto err_out_free_irq;
 	}
 
@@ -1444,8 +1425,7 @@ static int de_close (struct net_device *dev)
 	struct de_private *de = netdev_priv(dev);
 	unsigned long flags;
 
-	if (netif_msg_ifdown(de))
-		printk(KERN_DEBUG "%s: disabling interface\n", dev->name);
+	netif_dbg(de, ifdown, dev, "disabling interface\n");
 
 	del_timer_sync(&de->media_timer);
 
@@ -1466,9 +1446,9 @@ static void de_tx_timeout (struct net_device *dev)
 {
 	struct de_private *de = netdev_priv(dev);
 
-	printk(KERN_DEBUG "%s: NIC status %08x mode %08x sia %08x desc %u/%u/%u\n",
-	       dev->name, dr32(MacStatus), dr32(MacMode), dr32(SIAStatus),
-	       de->rx_tail, de->tx_head, de->tx_tail);
+	netdev_dbg(dev, "NIC status %08x mode %08x sia %08x desc %u/%u/%u\n",
+		   dr32(MacStatus), dr32(MacMode), dr32(SIAStatus),
+		   de->rx_tail, de->tx_head, de->tx_tail);
 
 	del_timer_sync(&de->media_timer);
 
@@ -1518,18 +1498,17 @@ static int __de_get_settings(struct de_private *de, struct ethtool_cmd *ecmd)
 	switch (de->media_type) {
 	case DE_MEDIA_AUI:
 		ecmd->port = PORT_AUI;
-		ecmd->speed = 5;
 		break;
 	case DE_MEDIA_BNC:
 		ecmd->port = PORT_BNC;
-		ecmd->speed = 2;
 		break;
 	default:
 		ecmd->port = PORT_TP;
-		ecmd->speed = SPEED_10;
 		break;
 	}
 
+	ethtool_cmd_speed_set(ecmd, 10);
+
 	if (dr32(MacMode) & FullDuplex)
 		ecmd->duplex = DUPLEX_FULL;
 	else
@@ -1550,9 +1529,7 @@ static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd)
 	u32 new_media;
 	unsigned int media_lock;
 
-	if (ecmd->speed != SPEED_10 && ecmd->speed != 5 && ecmd->speed != 2)
-		return -EINVAL;
-	if (de->de21040 && ecmd->speed == 2)
+	if (ethtool_cmd_speed(ecmd) != 10)
 		return -EINVAL;
 	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
 		return -EINVAL;
@@ -1696,9 +1673,8 @@ static int de_nway_reset(struct net_device *dev)
 
 	status = dr32(SIAStatus);
 	dw32(SIAStatus, (status & ~NWayState) | NWayRestart);
-	if (netif_msg_link(de))
-		dev_info(&de->dev->dev, "link nway restart, status %x,%x\n",
-			 status, dr32(SIAStatus));
+	netif_info(de, link, dev, "link nway restart, status %x,%x\n",
+		   status, dr32(SIAStatus));
 	return 0;
 }
 
@@ -1743,7 +1719,8 @@ static void __devinit de21040_get_mac_address (struct de_private *de)
 		de->dev->dev_addr[i] = value;
 		udelay(1);
 		if (boguscnt <= 0)
-			pr_warning(PFX "timeout reading 21040 MAC address byte %u\n", i);
+			pr_warn("timeout reading 21040 MAC address byte %u\n",
+				i);
 	}
 }
 
@@ -1929,8 +1906,10 @@ static void __devinit de21041_get_srom_info (struct de_private *de)
 					de->media[idx].csr14,
 					de->media[idx].csr15);
 
-		} else if (netif_msg_probe(de))
-			pr_cont("\n");
+		} else {
+			if (netif_msg_probe(de))
+				pr_cont("\n");
+		}
 
 		if (bufp > ((void *)&ee_data[DE_EEPROM_SIZE - 3]))
 			break;
@@ -1999,7 +1978,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 
 #ifndef MODULE
 	if (board_idx == 0)
-		printk("%s", version);
+		pr_info("%s\n", version);
 #endif
 
 	/* allocate a new ethernet device structure, and fill in defaults */
@@ -2041,7 +2020,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	/* check for invalid IRQ value */
 	if (pdev->irq < 2) {
 		rc = -EIO;
-		pr_err(PFX "invalid irq (%d) for pci dev %s\n",
+		pr_err("invalid irq (%d) for pci dev %s\n",
 		       pdev->irq, pci_name(pdev));
 		goto err_out_res;
 	}
@@ -2052,12 +2031,12 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	pciaddr = pci_resource_start(pdev, 1);
 	if (!pciaddr) {
 		rc = -EIO;
-		pr_err(PFX "no MMIO resource for pci dev %s\n", pci_name(pdev));
+		pr_err("no MMIO resource for pci dev %s\n", pci_name(pdev));
 		goto err_out_res;
 	}
 	if (pci_resource_len(pdev, 1) < DE_REGS_SIZE) {
 		rc = -EIO;
-		pr_err(PFX "MMIO resource (%llx) too small on pci dev %s\n",
+		pr_err("MMIO resource (%llx) too small on pci dev %s\n",
 		       (unsigned long long)pci_resource_len(pdev, 1),
 		       pci_name(pdev));
 		goto err_out_res;
@@ -2067,7 +2046,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	regs = ioremap_nocache(pciaddr, DE_REGS_SIZE);
 	if (!regs) {
 		rc = -EIO;
-		pr_err(PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
+		pr_err("Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
 		       (unsigned long long)pci_resource_len(pdev, 1),
 		       pciaddr, pci_name(pdev));
 		goto err_out_res;
@@ -2080,7 +2059,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 	/* make sure hardware is not running */
 	rc = de_reset_mac(de);
 	if (rc) {
-		pr_err(PFX "Cannot reset MAC, pci dev %s\n", pci_name(pdev));
+		pr_err("Cannot reset MAC, pci dev %s\n", pci_name(pdev));
 		goto err_out_iomap;
 	}
 
@@ -2100,11 +2079,11 @@ static int __devinit de_init_one (struct pci_dev *pdev,
 		goto err_out_iomap;
 
 	/* print info about board and interface just registered */
-	dev_info(&dev->dev, "%s at 0x%lx, %pM, IRQ %d\n",
-		 de->de21040 ? "21040" : "21041",
-		 dev->base_addr,
-		 dev->dev_addr,
-		 dev->irq);
+	netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
+		    de->de21040 ? "21040" : "21041",
+		    dev->base_addr,
+		    dev->dev_addr,
+		    dev->irq);
 
 	pci_set_drvdata(pdev, dev);
 
@@ -2192,7 +2171,7 @@ static int de_resume (struct pci_dev *pdev)
 	if (!netif_running(dev))
 		goto out_attach;
 	if ((retval = pci_enable_device(pdev))) {
-		dev_err(&dev->dev, "pci_enable_device failed in resume\n");
+		netdev_err(dev, "pci_enable_device failed in resume\n");
 		goto out;
 	}
 	pci_set_master(pdev);
@@ -2221,7 +2200,7 @@ static struct pci_driver de_driver = {
 static int __init de_init (void)
 {
 #ifdef MODULE
-	printk("%s", version);
+	pr_info("%s\n", version);
 #endif
 	return pci_register_driver(&de_driver);
 }
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 4dbd493b996..45144d5bd11 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -79,7 +79,7 @@
     every  usable DECchip board,  I  pinched Donald's 'next_module' field to
     link my modules together.
 
-    Upto 15 EISA cards can be supported under this driver, limited primarily
+    Up to 15 EISA cards can be supported under this driver, limited primarily
     by the available IRQ lines.  I have  checked different configurations of
     multiple depca, EtherWORKS 3 cards and de4x5 cards and  have not found a
     problem yet (provided you have at least depca.c v0.38) ...
@@ -517,7 +517,7 @@ struct mii_phy {
     u_int mci;              /* 21142 MII Connector Interrupt info        */
 };
 
-#define DE4X5_MAX_PHY 8     /* Allow upto 8 attached PHY devices per board */
+#define DE4X5_MAX_PHY 8     /* Allow up to 8 attached PHY devices per board */
 
 struct sia_phy {
     u_char mc;              /* Media Code                                */
@@ -1436,7 +1436,7 @@ de4x5_sw_reset(struct net_device *dev)
 
     /* Poll for setup frame completion (adapter interrupts are disabled now) */
 
-    for (j=0, i=0;(i<500) && (j==0);i++) {       /* Upto 500ms delay */
+    for (j=0, i=0;(i<500) && (j==0);i++) {       /* Up to 500ms delay */
 	mdelay(1);
 	if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1;
     }
@@ -1995,7 +1995,7 @@ SetMulticastFilter(struct net_device *dev)
 
 static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST;
 
-static int __init de4x5_eisa_probe (struct device *gendev)
+static int __devinit de4x5_eisa_probe (struct device *gendev)
 {
 	struct eisa_device *edev;
 	u_long iobase;
@@ -2097,7 +2097,7 @@ static int __devexit de4x5_eisa_remove (struct device *device)
 	return 0;
 }
 
-static struct eisa_device_id de4x5_eisa_ids[] = {
+static const struct eisa_device_id de4x5_eisa_ids[] __devinitconst = {
         { "DEC4250", 0 },	/* 0 is the board name index... */
         { "" }
 };
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 7064e035757..46851273196 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -295,8 +295,7 @@ enum dmfe_CR6_bits {
 /* Global variable declaration ----------------------------- */
 static int __devinitdata printed_version;
 static const char version[] __devinitconst =
-	KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version "
-	DRV_VERSION " (" DRV_RELDATE ")\n";
+	"Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
 
 static int dmfe_debug;
 static unsigned char dmfe_media_mode = DMFE_AUTO;
@@ -381,7 +380,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	DMFE_DBUG(0, "dmfe_init_one()", 0);
 
 	if (!printed_version++)
-		printk(version);
+		pr_info("%s\n", version);
 
 	/*
 	 *	SPARC on-board DM910x chips should be handled by the main
@@ -406,7 +405,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		pr_warning("32-bit PCI DMA not available\n");
+		pr_warn("32-bit PCI DMA not available\n");
 		err = -ENODEV;
 		goto err_out_free;
 	}
@@ -1224,7 +1223,7 @@ static void dmfe_timer(unsigned long data)
 
 
 	/* If chip reports that link is failed it could be because external
-		PHY link status pin is not conected correctly to chip
+		PHY link status pin is not connected correctly to chip
 		To be sure ask PHY too.
 	*/
 
@@ -2203,7 +2202,7 @@ static int __init dmfe_init_module(void)
 {
 	int rc;
 
-	printk(version);
+	pr_info("%s\n", version);
 	printed_version = 1;
 
 	DMFE_DBUG(0, "init_module() ", debug);
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 3031ed9c4a1..fa5eee925f2 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -115,7 +115,7 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
 			  0x02,       /* phy reset sequence length */
 			  0x01, 0x00, /* phy reset sequence */
 			  0x00, 0x78, /* media capabilities */
-			  0x00, 0xe0, /* nway advertisment */
+			  0x00, 0xe0, /* nway advertisement */
 			  0x00, 0x05, /* fdx bit map */
 			  0x00, 0x06  /* ttm bit map */
 			};
@@ -222,8 +222,8 @@ subsequent_board:
 	        /* there is no phy information, don't even try to build mtable */
 	        if (count == 0) {
 			if (tulip_debug > 0)
-				pr_warning("%s: no phy info, aborting mtable build\n",
-					   dev->name);
+				pr_warn("%s: no phy info, aborting mtable build\n",
+					dev->name);
 		        return;
 		}
 
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 0013642903e..5350d753e0f 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -125,12 +125,12 @@ int tulip_poll(struct napi_struct *napi, int budget)
 #endif
 
 	if (tulip_debug > 4)
-		printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
-		       entry, tp->rx_ring[entry].status);
+		netdev_dbg(dev, " In tulip_rx(), entry %d %08x\n",
+			   entry, tp->rx_ring[entry].status);
 
        do {
 		if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
-			printk(KERN_DEBUG " In tulip_poll(), hardware disappeared\n");
+			netdev_dbg(dev, " In tulip_poll(), hardware disappeared\n");
 			break;
 		}
                /* Acknowledge current RX interrupt sources. */
@@ -145,9 +145,9 @@ int tulip_poll(struct napi_struct *napi, int budget)
                        if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
                                break;
 
-                       if (tulip_debug > 5)
-                               printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
-                                      dev->name, entry, status);
+		       if (tulip_debug > 5)
+				netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+					   entry, status);
 
 		       if (++work_done >= budget)
                                goto not_done;
@@ -184,9 +184,9 @@ int tulip_poll(struct napi_struct *napi, int budget)
 					}
 			       } else {
                                 /* There was a fatal error. */
-                                       if (tulip_debug > 2)
-                                               printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
-                                                      dev->name, status);
+				       if (tulip_debug > 2)
+						netdev_dbg(dev, "Receive error, Rx status %08x\n",
+							   status);
 					dev->stats.rx_errors++; /* end of a packet.*/
 					if (pkt_len > 1518 ||
 					    (status & RxDescRunt))
@@ -367,16 +367,16 @@ static int tulip_rx(struct net_device *dev)
 	int received = 0;
 
 	if (tulip_debug > 4)
-		printk(KERN_DEBUG " In tulip_rx(), entry %d %08x\n",
-		       entry, tp->rx_ring[entry].status);
+		netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+			   entry, tp->rx_ring[entry].status);
 	/* If we own the next entry, it is a new packet. Send it up. */
 	while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
 		s32 status = le32_to_cpu(tp->rx_ring[entry].status);
 		short pkt_len;
 
 		if (tulip_debug > 5)
-			printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %08x\n",
-			       dev->name, entry, status);
+			netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+				   entry, status);
 		if (--rx_work_limit < 0)
 			break;
 
@@ -404,16 +404,16 @@ static int tulip_rx(struct net_device *dev)
 				/* Ingore earlier buffers. */
 				if ((status & 0xffff) != 0x7fff) {
 					if (tulip_debug > 1)
-						dev_warn(&dev->dev,
-							 "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
-							 status);
+						netdev_warn(dev,
+							    "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+							    status);
 					dev->stats.rx_length_errors++;
 				}
 			} else {
 				/* There was a fatal error. */
 				if (tulip_debug > 2)
-					printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
-					       dev->name, status);
+					netdev_dbg(dev, "Receive error, Rx status %08x\n",
+						   status);
 				dev->stats.rx_errors++; /* end of a packet.*/
 				if (pkt_len > 1518 ||
 				    (status & RxDescRunt))
@@ -573,8 +573,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 #endif /*  CONFIG_TULIP_NAPI */
 
 		if (tulip_debug > 4)
-			printk(KERN_DEBUG "%s: interrupt  csr5=%#8.8x new csr5=%#8.8x\n",
-			       dev->name, csr5, ioread32(ioaddr + CSR5));
+			netdev_dbg(dev, "interrupt  csr5=%#8.8x new csr5=%#8.8x\n",
+				   csr5, ioread32(ioaddr + CSR5));
 
 
 		if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
@@ -605,8 +605,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 					/* There was an major error, log it. */
 #ifndef final_version
 					if (tulip_debug > 1)
-						printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
-						       dev->name, status);
+						netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+							   status);
 #endif
 					dev->stats.tx_errors++;
 					if (status & 0x4104)
@@ -804,8 +804,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
 	}
 
 	if (tulip_debug > 4)
-		printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#04x\n",
-		       dev->name, ioread32(ioaddr + CSR5));
+		netdev_dbg(dev, "exiting interrupt, csr5=%#04x\n",
+			   ioread32(ioaddr + CSR5));
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index a0c770ee4b6..4bd13922875 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -182,8 +182,8 @@ void tulip_select_media(struct net_device *dev, int startup)
 		switch (mleaf->type) {
 		case 0:					/* 21140 non-MII xcvr. */
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver with control setting %02x\n",
-				       dev->name, p[1]);
+				netdev_dbg(dev, "Using a 21140 non-MII transceiver with control setting %02x\n",
+					   p[1]);
 			dev->if_port = p[0];
 			if (startup)
 				iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
@@ -204,15 +204,14 @@ void tulip_select_media(struct net_device *dev, int startup)
 				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
 				unsigned char *rst = rleaf->leafdata;
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s: Resetting the transceiver\n",
-					       dev->name);
+					netdev_dbg(dev, "Resetting the transceiver\n");
 				for (i = 0; i < rst[0]; i++)
 					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
 			}
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control %04x/%04x\n",
-				       dev->name, medianame[dev->if_port],
-				       setup[0], setup[1]);
+				netdev_dbg(dev, "21143 non-MII %s transceiver control %04x/%04x\n",
+					   medianame[dev->if_port],
+					   setup[0], setup[1]);
 			if (p[0] & 0x40) {	/* SIA (CSR13-15) setup values are provided. */
 				csr13val = setup[0];
 				csr14val = setup[1];
@@ -239,8 +238,8 @@ void tulip_select_media(struct net_device *dev, int startup)
 				if (startup) iowrite32(csr13val, ioaddr + CSR13);
 			}
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s:  Setting CSR15 to %08x/%08x\n",
-				       dev->name, csr15dir, csr15val);
+				netdev_dbg(dev, "Setting CSR15 to %08x/%08x\n",
+					   csr15dir, csr15val);
 			if (mleaf->type == 4)
 				new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
 			else
@@ -316,9 +315,9 @@ void tulip_select_media(struct net_device *dev, int startup)
 				if (tp->mii_advertise == 0)
 					tp->mii_advertise = tp->advertising[phy_num];
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s:  Advertising %04x on MII %d\n",
-					       dev->name, tp->mii_advertise,
-					       tp->phys[phy_num]);
+					netdev_dbg(dev, " Advertising %04x on MII %d\n",
+						   tp->mii_advertise,
+						   tp->phys[phy_num]);
 				tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
 			}
 			break;
@@ -335,8 +334,7 @@ void tulip_select_media(struct net_device *dev, int startup)
 				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
 				unsigned char *rst = rleaf->leafdata;
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s: Resetting the transceiver\n",
-					       dev->name);
+					netdev_dbg(dev, "Resetting the transceiver\n");
 				for (i = 0; i < rst[0]; i++)
 					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
 			}
@@ -344,20 +342,21 @@ void tulip_select_media(struct net_device *dev, int startup)
 			break;
 		}
 		default:
-			printk(KERN_DEBUG "%s:  Invalid media table selection %d\n",
-			       dev->name, mleaf->type);
+			netdev_dbg(dev, " Invalid media table selection %d\n",
+				   mleaf->type);
 			new_csr6 = 0x020E0000;
 		}
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %02x\n",
-			       dev->name, medianame[dev->if_port],
+			netdev_dbg(dev, "Using media type %s, CSR12 is %02x\n",
+				   medianame[dev->if_port],
 				   ioread32(ioaddr + CSR12) & 0xff);
 	} else if (tp->chip_id == LC82C168) {
 		if (startup && ! tp->medialock)
 			dev->if_port = tp->mii_cnt ? 11 : 0;
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s\n",
-			       dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]);
+			netdev_dbg(dev, "PNIC PHY status is %3.3x, media %s\n",
+				   ioread32(ioaddr + 0xB8),
+				   medianame[dev->if_port]);
 		if (tp->mii_cnt) {
 			new_csr6 = 0x810C0000;
 			iowrite32(0x0001, ioaddr + CSR15);
@@ -388,9 +387,9 @@ void tulip_select_media(struct net_device *dev, int startup)
 		} else
 			new_csr6 = 0x03860000;
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: No media description table, assuming %s transceiver, CSR12 %02x\n",
-			       dev->name, medianame[dev->if_port],
-			       ioread32(ioaddr + CSR12));
+			netdev_dbg(dev, "No media description table, assuming %s transceiver, CSR12 %02x\n",
+				   medianame[dev->if_port],
+				   ioread32(ioaddr + CSR12));
 	}
 
 	tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
@@ -504,8 +503,8 @@ void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
 
 		/* Fixup for DLink with miswired PHY. */
 		if (mii_advert != to_advert) {
-			printk(KERN_DEBUG "tulip%d:  Advertising %04x on PHY %d, previously advertising %04x\n",
-			       board_idx, to_advert, phy, mii_advert);
+			pr_debug("tulip%d:  Advertising %04x on PHY %d, previously advertising %04x\n",
+				 board_idx, to_advert, phy, mii_advert);
 			tulip_mdio_write (dev, phy, 4, to_advert);
 		}
 
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index a63e64b6863..aa4d9dad039 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -40,8 +40,8 @@ void pnic_do_nway(struct net_device *dev)
 			new_csr6 |= 0x00000200;
 		}
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: PNIC autonegotiated status %08x, %s\n",
-			       dev->name, phy_reg, medianame[dev->if_port]);
+			netdev_dbg(dev, "PNIC autonegotiated status %08x, %s\n",
+				   phy_reg, medianame[dev->if_port]);
 		if (tp->csr6 != new_csr6) {
 			tp->csr6 = new_csr6;
 			/* Restart Tx */
@@ -58,8 +58,8 @@ void pnic_lnk_change(struct net_device *dev, int csr5)
 	int phy_reg = ioread32(ioaddr + 0xB8);
 
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: PNIC link changed state %08x, CSR5 %08x\n",
-		       dev->name, phy_reg, csr5);
+		netdev_dbg(dev, "PNIC link changed state %08x, CSR5 %08x\n",
+			   phy_reg, csr5);
 	if (ioread32(ioaddr + CSR5) & TPLnkFail) {
 		iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7);
 		/* If we use an external MII, then we mustn't use the
@@ -114,8 +114,8 @@ void pnic_timer(unsigned long data)
 		int csr5 = ioread32(ioaddr + CSR5);
 
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: PNIC timer PHY status %08x, %s CSR5 %08x\n",
-			       dev->name, phy_reg, medianame[dev->if_port], csr5);
+			netdev_dbg(dev, "PNIC timer PHY status %08x, %s CSR5 %08x\n",
+				   phy_reg, medianame[dev->if_port], csr5);
 		if (phy_reg & 0x04000000) {	/* Remote link fault */
 			iowrite32(0x0201F078, ioaddr + 0xB8);
 			next_tick = 1*HZ;
@@ -125,11 +125,11 @@ void pnic_timer(unsigned long data)
 			next_tick = 60*HZ;
 		} else if (csr5 & TPLnkFail) { /* 100baseTx link beat */
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n",
-				       dev->name, medianame[dev->if_port],
-				       csr12,
-				       ioread32(ioaddr + CSR5),
-				       ioread32(ioaddr + 0xB8));
+				netdev_dbg(dev, "%s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n",
+					   medianame[dev->if_port],
+					   csr12,
+					   ioread32(ioaddr + CSR5),
+					   ioread32(ioaddr + 0xB8));
 			next_tick = 3*HZ;
 			if (tp->medialock) {
 			} else if (tp->nwayset  &&  (dev->if_port & 1)) {
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 4690c8e6920..93358ee4d83 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -125,8 +125,8 @@ void pnic2_start_nway(struct net_device *dev)
         csr14 |= 0x00001184;
 
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, csr14=%08x\n",
-		       dev->name, csr14);
+		netdev_dbg(dev, "Restarting PNIC2 autonegotiation, csr14=%08x\n",
+			   csr14);
 
         /* tell pnic2_lnk_change we are doing an nway negotiation */
 	dev->if_port = 0;
@@ -137,8 +137,7 @@ void pnic2_start_nway(struct net_device *dev)
 
 	tp->csr6 = ioread32(ioaddr + CSR6);
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: On Entry to Nway, csr6=%08x\n",
-		       dev->name, tp->csr6);
+		netdev_dbg(dev, "On Entry to Nway, csr6=%08x\n", tp->csr6);
 
         /* mask off any bits not to touch
          * comment at top of file explains mask value
@@ -271,9 +270,10 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 			iowrite32(1, ioaddr + CSR13);
 
 			if (tulip_debug > 2)
-			        printk(KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n",
-				       dev->name, tp->csr6,
-				       ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12));
+				netdev_dbg(dev, "Setting CSR6 %08x/%x CSR12 %08x\n",
+					   tp->csr6,
+					   ioread32(ioaddr + CSR6),
+					   ioread32(ioaddr + CSR12));
 
 			/* now the following actually writes out the
 			 * new csr6 values
@@ -324,7 +324,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 		/* Link blew? Maybe restart NWay. */
 
 		if (tulip_debug > 2)
-			printk(KERN_DEBUG "%s: Ugh! Link blew?\n", dev->name);
+			netdev_dbg(dev, "Ugh! Link blew?\n");
 
 		del_timer_sync(&tp->timer);
 		pnic2_start_nway(dev);
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 36c2725ec88..2017faf2d0e 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -28,11 +28,11 @@ void tulip_media_task(struct work_struct *work)
 	unsigned long flags;
 
 	if (tulip_debug > 2) {
-		printk(KERN_DEBUG "%s: Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
-		       dev->name, medianame[dev->if_port],
-		       ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
-		       csr12, ioread32(ioaddr + CSR13),
-		       ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+		netdev_dbg(dev, "Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
+			   medianame[dev->if_port],
+			   ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
+			   csr12, ioread32(ioaddr + CSR13),
+			   ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
 	}
 	switch (tp->chip_id) {
 	case DC21140:
@@ -48,9 +48,9 @@ void tulip_media_task(struct work_struct *work)
 			   Assume this a generic MII or SYM transceiver. */
 			next_tick = 60*HZ;
 			if (tulip_debug > 2)
-				printk(KERN_DEBUG "%s: network media monitor CSR6 %08x CSR12 0x%02x\n",
-				       dev->name,
-				       ioread32(ioaddr + CSR6), csr12 & 0xff);
+				netdev_dbg(dev, "network media monitor CSR6 %08x CSR12 0x%02x\n",
+					   ioread32(ioaddr + CSR6),
+					   csr12 & 0xff);
 			break;
 		}
 		mleaf = &tp->mtable->mleaf[tp->cur_index];
@@ -62,8 +62,8 @@ void tulip_media_task(struct work_struct *work)
 			s8 bitnum = p[offset];
 			if (p[offset+1] & 0x80) {
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s: Transceiver monitor tick CSR12=%#02x, no media sense\n",
-					       dev->name, csr12);
+					netdev_dbg(dev, "Transceiver monitor tick CSR12=%#02x, no media sense\n",
+						   csr12);
 				if (mleaf->type == 4) {
 					if (mleaf->media == 3 && (csr12 & 0x02))
 						goto select_next_media;
@@ -71,17 +71,16 @@ void tulip_media_task(struct work_struct *work)
 				break;
 			}
 			if (tulip_debug > 2)
-				printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
-				       dev->name, csr12, (bitnum >> 1) & 7,
-				       (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
-				       (bitnum >= 0));
+				netdev_dbg(dev, "Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
+					   csr12, (bitnum >> 1) & 7,
+					   (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
+					   (bitnum >= 0));
 			/* Check that the specified bit has the proper value. */
 			if ((bitnum < 0) !=
 				((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {
 				if (tulip_debug > 2)
-					printk(KERN_DEBUG "%s: Link beat detected for %s\n",
-					       dev->name,
-					       medianame[mleaf->media & MEDIA_MASK]);
+					netdev_dbg(dev, "Link beat detected for %s\n",
+						   medianame[mleaf->media & MEDIA_MASK]);
 				if ((p[2] & 0x61) == 0x01)	/* Bogus Znyx board. */
 					goto actually_mii;
 				netif_carrier_on(dev);
@@ -99,10 +98,9 @@ void tulip_media_task(struct work_struct *work)
 			if (tulip_media_cap[dev->if_port] & MediaIsFD)
 				goto select_next_media; /* Skip FD entries. */
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: No link beat on media %s, trying transceiver type %s\n",
-				       dev->name,
-				       medianame[mleaf->media & MEDIA_MASK],
-				       medianame[tp->mtable->mleaf[tp->cur_index].media]);
+				netdev_dbg(dev, "No link beat on media %s, trying transceiver type %s\n",
+					   medianame[mleaf->media & MEDIA_MASK],
+					   medianame[tp->mtable->mleaf[tp->cur_index].media]);
 			tulip_select_media(dev, 0);
 			/* Restart the transmit process. */
 			tulip_restart_rxtx(tp);
@@ -166,10 +164,9 @@ void comet_timer(unsigned long data)
 	int next_tick = 60*HZ;
 
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: Comet link status %04x partner capability %04x\n",
-		       dev->name,
-		       tulip_mdio_read(dev, tp->phys[0], 1),
-		       tulip_mdio_read(dev, tp->phys[0], 5));
+		netdev_dbg(dev, "Comet link status %04x partner capability %04x\n",
+			   tulip_mdio_read(dev, tp->phys[0], 1),
+			   tulip_mdio_read(dev, tp->phys[0], 5));
 	/* mod_timer synchronizes us with potential add_timer calls
 	 * from interrupts.
 	 */
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index ed66a16711d..9db528967da 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -547,11 +547,9 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)
 			udelay(10);
 
 		if (!i)
-			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed"
-					" (CSR5 0x%x CSR6 0x%x)\n",
-					pci_name(tp->pdev),
-					ioread32(ioaddr + CSR5),
-					ioread32(ioaddr + CSR6));
+			netdev_dbg(tp->dev, "tulip_stop_rxtx() failed (CSR5 0x%x CSR6 0x%x)\n",
+				   ioread32(ioaddr + CSR5),
+				   ioread32(ioaddr + CSR6));
 	}
 }
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 5c01e260f1b..82f87647207 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -12,6 +12,7 @@
 	Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
+#define pr_fmt(fmt) "tulip: " fmt
 
 #define DRV_NAME	"tulip"
 #ifdef CONFIG_TULIP_NAPI
@@ -119,8 +120,6 @@ module_param(csr0, int, 0);
 module_param_array(options, int, NULL, 0);
 module_param_array(full_duplex, int, NULL, 0);
 
-#define PFX DRV_NAME ": "
-
 #ifdef TULIP_DEBUG
 int tulip_debug = TULIP_DEBUG;
 #else
@@ -331,8 +330,7 @@ static void tulip_up(struct net_device *dev)
 	udelay(100);
 
 	if (tulip_debug > 1)
-		printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
-		       dev->name, dev->irq);
+		netdev_dbg(dev, "tulip_up(), irq==%d\n", dev->irq);
 
 	iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
 	iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
@@ -499,10 +497,10 @@ media_picked:
 	iowrite32(0, ioaddr + CSR2);		/* Rx poll demand */
 
 	if (tulip_debug > 2) {
-		printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
-		       dev->name, ioread32(ioaddr + CSR0),
-		       ioread32(ioaddr + CSR5),
-		       ioread32(ioaddr + CSR6));
+		netdev_dbg(dev, "Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
+			   ioread32(ioaddr + CSR0),
+			   ioread32(ioaddr + CSR5),
+			   ioread32(ioaddr + CSR6));
 	}
 
 	/* Set the timer to switch to check for link beat and perhaps switch
@@ -843,8 +841,7 @@ static int tulip_close (struct net_device *dev)
 	tulip_down (dev);
 
 	if (tulip_debug > 1)
-		dev_printk(KERN_DEBUG, &dev->dev,
-			   "Shutting down ethercard, status was %02x\n",
+		netdev_dbg(dev, "Shutting down ethercard, status was %02x\n",
 			   ioread32 (ioaddr + CSR5));
 
 	free_irq (dev->irq, dev);
@@ -1207,7 +1204,7 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev,
 	u32 csr0;
 
 	if (tulip_debug > 3)
-		printk(KERN_DEBUG "%s: tulip_mwi_config()\n", pci_name(pdev));
+		netdev_dbg(dev, "tulip_mwi_config()\n");
 
 	tp->csr0 = csr0 = 0;
 
@@ -1269,8 +1266,8 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev,
 out:
 	tp->csr0 = csr0;
 	if (tulip_debug > 2)
-		printk(KERN_DEBUG "%s: MWI config cacheline=%d, csr0=%08x\n",
-		       pci_name(pdev), cache, csr0);
+		netdev_dbg(dev, "MWI config cacheline=%d, csr0=%08x\n",
+			   cache, csr0);
 }
 #endif
 
@@ -1340,13 +1337,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	 */
 
         if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
-		pr_err(PFX "skipping LMC card\n");
+		pr_err("skipping LMC card\n");
 		return -ENODEV;
 	} else if (pdev->subsystem_vendor == PCI_VENDOR_ID_SBE &&
 		   (pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_T3E3 ||
 		    pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P0 ||
 		    pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P1)) {
-		pr_err(PFX "skipping SBE T3E3 port\n");
+		pr_err("skipping SBE T3E3 port\n");
 		return -ENODEV;
 	}
 
@@ -1362,13 +1359,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 
 		if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
 		    pdev->revision < 0x30) {
-			pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
+			pr_info("skipping early DM9100 with Crc bug (use dmfe)\n");
 			return -ENODEV;
 		}
 
 		dp = pci_device_to_OF_node(pdev);
 		if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
-			pr_info(PFX "skipping DM910x expansion card (use dmfe)\n");
+			pr_info("skipping DM910x expansion card (use dmfe)\n");
 			return -ENODEV;
 		}
 	}
@@ -1415,16 +1412,14 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 
 	i = pci_enable_device(pdev);
 	if (i) {
-		pr_err(PFX "Cannot enable tulip board #%d, aborting\n",
-		       board_idx);
+		pr_err("Cannot enable tulip board #%d, aborting\n", board_idx);
 		return i;
 	}
 
 	/* The chip will fail to enter a low-power state later unless
 	 * first explicitly commanded into D0 */
 	if (pci_set_power_state(pdev, PCI_D0)) {
-		printk (KERN_NOTICE PFX
-			"Failed to set power state to D0\n");
+		pr_notice("Failed to set power state to D0\n");
 	}
 
 	irq = pdev->irq;
@@ -1432,13 +1427,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	/* alloc_etherdev ensures aligned and zeroed private structures */
 	dev = alloc_etherdev (sizeof (*tp));
 	if (!dev) {
-		pr_err(PFX "ether device alloc failed, aborting\n");
+		pr_err("ether device alloc failed, aborting\n");
 		return -ENOMEM;
 	}
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
-		pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
+		pr_err("%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
 		       pci_name(pdev),
 		       (unsigned long long)pci_resource_len (pdev, 0),
 		       (unsigned long long)pci_resource_start (pdev, 0));
@@ -1483,7 +1478,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 		if (sig == 0x09811317) {
 			tp->flags |= COMET_PM;
 			tp->wolinfo.supported = WAKE_PHY | WAKE_MAGIC;
-			printk(KERN_INFO "tulip_init_one: Enabled WOL support for AN983B\n");
+			pr_info("%s: Enabled WOL support for AN983B\n",
+				__func__);
 		}
 	}
 	tp->pdev = pdev;
@@ -1879,7 +1875,7 @@ save_state:
 		tulip_set_wolopts(pdev, tp->wolinfo.wolopts);
 		rc = pci_enable_wake(pdev, pstate, tp->wolinfo.wolopts);
 		if (rc)
-			printk("tulip: pci_enable_wake failed (%d)\n", rc);
+			pr_err("pci_enable_wake failed (%d)\n", rc);
 	}
 	pci_set_power_state(pdev, pstate);
 
@@ -1905,12 +1901,12 @@ static int tulip_resume(struct pci_dev *pdev)
 		return 0;
 
 	if ((retval = pci_enable_device(pdev))) {
-		pr_err(PFX "pci_enable_device failed in resume\n");
+		pr_err("pci_enable_device failed in resume\n");
 		return retval;
 	}
 
 	if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
-		pr_err(PFX "request_irq failed in resume\n");
+		pr_err("request_irq failed in resume\n");
 		return retval;
 	}
 
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 74217dbf014..9e63f406f72 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -209,8 +209,7 @@ enum uli526x_CR6_bits {
 /* Global variable declaration ----------------------------- */
 static int __devinitdata printed_version;
 static const char version[] __devinitconst =
-	KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
-	DRV_VERSION " (" DRV_RELDATE ")\n";
+	"ULi M5261/M5263 net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
 
 static int uli526x_debug;
 static unsigned char uli526x_media_mode = ULI526X_AUTO;
@@ -283,7 +282,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 	ULI526X_DBUG(0, "uli526x_init_one()", 0);
 
 	if (!printed_version++)
-		printk(version);
+		pr_info("%s\n", version);
 
 	/* Init network device */
 	dev = alloc_etherdev(sizeof(*db));
@@ -292,7 +291,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		pr_warning("32-bit PCI DMA not available\n");
+		pr_warn("32-bit PCI DMA not available\n");
 		err = -ENODEV;
 		goto err_out_free;
 	}
@@ -390,9 +389,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
 	if (err)
 		goto err_out_res;
 
-	dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
-		 ent->driver_data >> 16, pci_name(pdev),
-		 dev->dev_addr, dev->irq);
+	netdev_info(dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
+		    ent->driver_data >> 16, pci_name(pdev),
+		    dev->dev_addr, dev->irq);
 
 	pci_set_master(pdev);
 
@@ -524,7 +523,7 @@ static void uli526x_init(struct net_device *dev)
 		}
 	}
 	if(phy_tmp == 32)
-		pr_warning("Can not find the phy address!!!");
+		pr_warn("Can not find the phy address!!!\n");
 	/* Parser SROM and media mode */
 	db->media_mode = uli526x_media_mode;
 
@@ -590,7 +589,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
 
 	/* Too large packet check */
 	if (skb->len > MAX_PACKET_SIZE) {
-		pr_err("big packet = %d\n", (u16)skb->len);
+		netdev_err(dev, "big packet = %d\n", (u16)skb->len);
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
@@ -600,7 +599,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
 	/* No Tx resource check, it never happen nromally */
 	if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
 		spin_unlock_irqrestore(&db->lock, flags);
-		pr_err("No Tx resource %ld\n", db->tx_packet_cnt);
+		netdev_err(dev, "No Tx resource %ld\n", db->tx_packet_cnt);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -667,15 +666,6 @@ static int uli526x_stop(struct net_device *dev)
 	/* free allocated rx buffer */
 	uli526x_free_rxbuffer(db);
 
-#if 0
-	/* show statistic counter */
-	printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
-		db->tx_fifo_underrun, db->tx_excessive_collision,
-		db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
-		db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
-		db->reset_fatal, db->reset_TXtimeout);
-#endif
-
 	return 0;
 }
 
@@ -755,7 +745,6 @@ static void uli526x_free_tx_pkt(struct net_device *dev,
 	txptr = db->tx_remove_ptr;
 	while(db->tx_packet_cnt) {
 		tdes0 = le32_to_cpu(txptr->tdes0);
-		/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
 		if (tdes0 & 0x80000000)
 			break;
 
@@ -765,7 +754,6 @@ static void uli526x_free_tx_pkt(struct net_device *dev,
 
 		/* Transmit statistic counter */
 		if ( tdes0 != 0x7fffffff ) {
-			/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
 			dev->stats.collisions += (tdes0 >> 3) & 0xf;
 			dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
 			if (tdes0 & TDES0_ERR_MASK) {
@@ -838,7 +826,6 @@ static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info
 			/* error summary bit check */
 			if (rdes0 & 0x8000) {
 				/* This is a error packet */
-				//printk(DRV_NAME ": rdes0: %lx\n", rdes0);
 				dev->stats.rx_errors++;
 				if (rdes0 & 1)
 					dev->stats.rx_fifo_errors++;
@@ -945,12 +932,12 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
 
 	ecmd->transceiver = XCVR_EXTERNAL;
 
-	ecmd->speed = 10;
+	ethtool_cmd_speed_set(ecmd, SPEED_10);
 	ecmd->duplex = DUPLEX_HALF;
 
 	if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
 	{
-		ecmd->speed = 100;
+		ethtool_cmd_speed_set(ecmd, SPEED_100);
 	}
 	if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
 	{
@@ -958,7 +945,7 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
 	}
 	if(db->link_failed)
 	{
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 
@@ -1024,7 +1011,6 @@ static void uli526x_timer(unsigned long data)
 	struct net_device *dev = (struct net_device *) data;
 	struct uli526x_board_info *db = netdev_priv(dev);
  	unsigned long flags;
-	u8 TmpSpeed=10;
 
 	//ULI526X_DBUG(0, "uli526x_timer()", 0);
 	spin_lock_irqsave(&db->lock, flags);
@@ -1047,8 +1033,7 @@ static void uli526x_timer(unsigned long data)
 		if ( time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_TIMEOUT) ) {
 			db->reset_TXtimeout++;
 			db->wait_reset = 1;
-			printk( "%s: Tx timeout - resetting\n",
-			       dev->name);
+			netdev_err(dev, " Tx timeout - resetting\n");
 		}
 	}
 
@@ -1070,7 +1055,7 @@ static void uli526x_timer(unsigned long data)
 		/* Link Failed */
 		ULI526X_DBUG(0, "Link Failed", tmp_cr12);
 		netif_carrier_off(dev);
-		pr_info("%s NIC Link is Down\n",dev->name);
+		netdev_info(dev, "NIC Link is Down\n");
 		db->link_failed = 1;
 
 		/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
@@ -1096,18 +1081,13 @@ static void uli526x_timer(unsigned long data)
 
 			if(db->link_failed==0)
 			{
-				if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
-				{
-					TmpSpeed = 100;
-				}
-				if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
-				{
-					pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
-				}
-				else
-				{
-					pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
-				}
+				netdev_info(dev, "NIC Link is Up %d Mbps %s duplex\n",
+					    (db->op_mode == ULI526X_100MHF ||
+					     db->op_mode == ULI526X_100MFD)
+					    ? 100 : 10,
+					    (db->op_mode == ULI526X_10MFD ||
+					     db->op_mode == ULI526X_100MFD)
+					    ? "Full" : "Half");
 				netif_carrier_on(dev);
 			}
 			/* SHOW_MEDIA_TYPE(db->op_mode); */
@@ -1116,7 +1096,7 @@ static void uli526x_timer(unsigned long data)
 		{
 			if(db->init==1)
 			{
-				pr_info("%s NIC Link is Down\n",dev->name);
+				netdev_info(dev, "NIC Link is Down\n");
 				netif_carrier_off(dev);
 			}
 		}
@@ -1242,7 +1222,7 @@ static int uli526x_resume(struct pci_dev *pdev)
 
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err) {
-		dev_warn(&dev->dev, "Could not put device into D0\n");
+		netdev_warn(dev, "Could not put device into D0\n");
 		return err;
 	}
 
@@ -1443,7 +1423,7 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
 		update_cr6(db->cr6_data, dev->base_addr);
 		dev->trans_start = jiffies;
 	} else
-		pr_err("No Tx resource - Send_filter_frame!\n");
+		netdev_err(dev, "No Tx resource - Send_filter_frame!\n");
 }
 
 
@@ -1540,7 +1520,6 @@ static u8 uli526x_sense_speed(struct uli526x_board_info * db)
 		else
 			phy_mode = 0x1000;
 
-		/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
 		switch (phy_mode) {
 		case 0x1000: db->op_mode = ULI526X_10MHF; break;
 		case 0x2000: db->op_mode = ULI526X_10MFD; break;
@@ -1829,7 +1808,7 @@ MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8
 static int __init uli526x_init_module(void)
 {
 
-	printk(version);
+	pr_info("%s\n", version);
 	printed_version = 1;
 
 	ULI526X_DBUG(0, "init_module() ", debug);
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index f0b231035de..862eadf0719 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -44,6 +44,8 @@
 	* Wake-On-LAN
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME	"winbond-840"
 #define DRV_VERSION	"1.01-e"
 #define DRV_RELDATE	"Sep-11-2006"
@@ -139,7 +141,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 
 /* These identify the driver base version and may not be removed. */
 static const char version[] __initconst =
-	KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) "
+	"v" DRV_VERSION " (2.4 port) "
 	DRV_RELDATE "  Donald Becker <becker@scyld.com>\n"
 	"  http://www.scyld.com/network/drivers.html\n";
 
@@ -375,8 +377,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
 	irq = pdev->irq;
 
 	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
-		pr_warning("Winbond-840: Device %s disabled due to DMA limitations\n",
-			   pci_name(pdev));
+		pr_warn("Device %s disabled due to DMA limitations\n",
+			pci_name(pdev));
 		return -EIO;
 	}
 	dev = alloc_etherdev(sizeof(*np));
@@ -643,8 +645,7 @@ static int netdev_open(struct net_device *dev)
 		goto out_err;
 
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: w89c840_open() irq %d\n",
-		       dev->name, dev->irq);
+		netdev_dbg(dev, "w89c840_open() irq %d\n", dev->irq);
 
 	if((i=alloc_ringdesc(dev)))
 		goto out_err;
@@ -656,7 +657,7 @@ static int netdev_open(struct net_device *dev)
 
 	netif_start_queue(dev);
 	if (debug > 2)
-		printk(KERN_DEBUG "%s: Done netdev_open()\n", dev->name);
+		netdev_dbg(dev, "Done netdev_open()\n");
 
 	/* Set the timer to check for link beat. */
 	init_timer(&np->timer);
@@ -785,9 +786,9 @@ static void netdev_timer(unsigned long data)
 	void __iomem *ioaddr = np->base_addr;
 
 	if (debug > 2)
-		printk(KERN_DEBUG "%s: Media selection timer tick, status %08x config %08x\n",
-		       dev->name, ioread32(ioaddr + IntrStatus),
-		       ioread32(ioaddr + NetworkConfig));
+		netdev_dbg(dev, "Media selection timer tick, status %08x config %08x\n",
+			   ioread32(ioaddr + IntrStatus),
+			   ioread32(ioaddr + NetworkConfig));
 	spin_lock_irq(&np->lock);
 	update_csr6(dev, update_link(dev));
 	spin_unlock_irq(&np->lock);
@@ -1054,8 +1055,8 @@ static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irq(&np->lock);
 
 	if (debug > 4) {
-		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d\n",
-		       dev->name, np->cur_tx, entry);
+		netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
+			   np->cur_tx, entry);
 	}
 	return NETDEV_TX_OK;
 }
@@ -1072,8 +1073,8 @@ static void netdev_tx_done(struct net_device *dev)
 		if (tx_status & 0x8000) { 	/* There was an error, log it. */
 #ifndef final_version
 			if (debug > 1)
-				printk(KERN_DEBUG "%s: Transmit error, Tx status %08x\n",
-				       dev->name, tx_status);
+				netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+					   tx_status);
 #endif
 			np->stats.tx_errors++;
 			if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
@@ -1085,8 +1086,8 @@ static void netdev_tx_done(struct net_device *dev)
 		} else {
 #ifndef final_version
 			if (debug > 3)
-				printk(KERN_DEBUG "%s: Transmit slot %d ok, Tx status %08x\n",
-				       dev->name, entry, tx_status);
+				netdev_dbg(dev, "Transmit slot %d ok, Tx status %08x\n",
+					   entry, tx_status);
 #endif
 			np->stats.tx_bytes += np->tx_skbuff[entry]->len;
 			np->stats.collisions += (tx_status >> 3) & 15;
@@ -1129,8 +1130,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 		iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus);
 
 		if (debug > 4)
-			printk(KERN_DEBUG "%s: Interrupt, status %04x\n",
-			       dev->name, intr_status);
+			netdev_dbg(dev, "Interrupt, status %04x\n", intr_status);
 
 		if ((intr_status & (NormalIntr|AbnormalIntr)) == 0)
 			break;
@@ -1171,8 +1171,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 	} while (1);
 
 	if (debug > 3)
-		printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x\n",
-		       dev->name, ioread32(ioaddr + IntrStatus));
+		netdev_dbg(dev, "exiting interrupt, status=%#4.4x\n",
+			   ioread32(ioaddr + IntrStatus));
 	return IRQ_RETVAL(handled);
 }
 
@@ -1185,8 +1185,8 @@ static int netdev_rx(struct net_device *dev)
 	int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
 
 	if (debug > 4) {
-		printk(KERN_DEBUG " In netdev_rx(), entry %d status %04x\n",
-		       entry, np->rx_ring[entry].status);
+		netdev_dbg(dev, " In netdev_rx(), entry %d status %04x\n",
+			   entry, np->rx_ring[entry].status);
 	}
 
 	/* If EOP is set on the next entry, it's a new packet. Send it up. */
@@ -1195,8 +1195,8 @@ static int netdev_rx(struct net_device *dev)
 		s32 status = desc->status;
 
 		if (debug > 4)
-			printk(KERN_DEBUG "  netdev_rx() status was %08x\n",
-			       status);
+			netdev_dbg(dev, "  netdev_rx() status was %08x\n",
+				   status);
 		if (status < 0)
 			break;
 		if ((status & 0x38008300) != 0x0300) {
@@ -1211,8 +1211,8 @@ static int netdev_rx(struct net_device *dev)
 			} else if (status & 0x8000) {
 				/* There was a fatal error. */
 				if (debug > 2)
-					printk(KERN_DEBUG "%s: Receive error, Rx status %08x\n",
-					       dev->name, status);
+					netdev_dbg(dev, "Receive error, Rx status %08x\n",
+						   status);
 				np->stats.rx_errors++; /* end of a packet.*/
 				if (status & 0x0890) np->stats.rx_length_errors++;
 				if (status & 0x004C) np->stats.rx_frame_errors++;
@@ -1225,8 +1225,8 @@ static int netdev_rx(struct net_device *dev)
 
 #ifndef final_version
 			if (debug > 4)
-				printk(KERN_DEBUG "  netdev_rx() normal Rx pkt length %d status %x\n",
-				       pkt_len, status);
+				netdev_dbg(dev, "  netdev_rx() normal Rx pkt length %d status %x\n",
+					   pkt_len, status);
 #endif
 			/* Check if the packet is long enough to accept without copying
 			   to a minimally-sized skbuff. */
@@ -1251,10 +1251,10 @@ static int netdev_rx(struct net_device *dev)
 #ifndef final_version				/* Remove after testing. */
 			/* You will want this info for the initial debug. */
 			if (debug > 5)
-				printk(KERN_DEBUG "  Rx data %pM %pM %02x%02x %pI4\n",
-				       &skb->data[0], &skb->data[6],
-				       skb->data[12], skb->data[13],
-				       &skb->data[14]);
+				netdev_dbg(dev, "  Rx data %pM %pM %02x%02x %pI4\n",
+					   &skb->data[0], &skb->data[6],
+					   skb->data[12], skb->data[13],
+					   &skb->data[14]);
 #endif
 			skb->protocol = eth_type_trans(skb, dev);
 			netif_rx(skb);
@@ -1292,8 +1292,7 @@ static void netdev_error(struct net_device *dev, int intr_status)
 	void __iomem *ioaddr = np->base_addr;
 
 	if (debug > 2)
-		printk(KERN_DEBUG "%s: Abnormal event, %08x\n",
-		       dev->name, intr_status);
+		netdev_dbg(dev, "Abnormal event, %08x\n", intr_status);
 	if (intr_status == 0xffffffff)
 		return;
 	spin_lock(&np->lock);
@@ -1313,8 +1312,7 @@ static void netdev_error(struct net_device *dev, int intr_status)
 		 	new = 127; /* load full packet before starting */
 		new = (np->csr6 & ~(0x7F << 14)) | (new<<14);
 #endif
-		printk(KERN_DEBUG "%s: Tx underflow, new csr6 %08x\n",
-		       dev->name, new);
+		netdev_dbg(dev, "Tx underflow, new csr6 %08x\n", new);
 		update_csr6(dev, new);
 	}
 	if (intr_status & RxDied) {		/* Missed a Rx frame. */
@@ -1487,13 +1485,12 @@ static int netdev_close(struct net_device *dev)
 	netif_stop_queue(dev);
 
 	if (debug > 1) {
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was %08x Config %08x\n",
-		       dev->name, ioread32(ioaddr + IntrStatus),
-		       ioread32(ioaddr + NetworkConfig));
-		printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d,  Rx %d / %d\n",
-		       dev->name,
-		       np->cur_tx, np->dirty_tx,
-		       np->cur_rx, np->dirty_rx);
+		netdev_dbg(dev, "Shutting down ethercard, status was %08x Config %08x\n",
+			   ioread32(ioaddr + IntrStatus),
+			   ioread32(ioaddr + NetworkConfig));
+		netdev_dbg(dev, "Queue pointers were Tx %d / %d,  Rx %d / %d\n",
+			   np->cur_tx, np->dirty_tx,
+			   np->cur_rx, np->dirty_rx);
 	}
 
  	/* Stop the chip's Tx and Rx processes. */
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 5a73752be2c..988b8eb24d3 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -37,15 +37,6 @@
 #include <asm/irq.h>
 #endif
 
-#ifdef DEBUG
-#define enter(x)   printk("Enter: %s, %s line %i\n",x,__FILE__,__LINE__)
-#define leave(x)   printk("Leave: %s, %s line %i\n",x,__FILE__,__LINE__)
-#else
-#define enter(x)   do {} while (0)
-#define leave(x)   do {} while (0)
-#endif
-
-
 MODULE_DESCRIPTION("Xircom Cardbus ethernet driver");
 MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>");
 MODULE_LICENSE("GPL");
@@ -161,7 +152,7 @@ static struct pci_driver xircom_ops = {
 };
 
 
-#ifdef DEBUG
+#if defined DEBUG && DEBUG > 1
 static void print_binary(unsigned int number)
 {
 	int i,i2;
@@ -176,7 +167,7 @@ static void print_binary(unsigned int number)
 		if ((i&3)==0)
 			buffer[i2++]=' ';
 	}
-	printk("%s\n",buffer);
+	pr_debug("%s\n",buffer);
 }
 #endif
 
@@ -205,7 +196,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 	struct xircom_private *private;
 	unsigned long flags;
 	unsigned short tmp16;
-	enter("xircom_probe");
 
 	/* First do the PCI initialisation */
 
@@ -272,8 +262,8 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 		goto reg_fail;
 	}
 
-	dev_info(&dev->dev, "Xircom cardbus revision %i at irq %i\n",
-		 pdev->revision, pdev->irq);
+	netdev_info(dev, "Xircom cardbus revision %i at irq %i\n",
+		    pdev->revision, pdev->irq);
 	/* start the transmitter to get a heartbeat */
 	/* TODO: send 2 dummy packets here */
 	transceiver_voodoo(private);
@@ -285,7 +275,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 
 	trigger_receive(private);
 
-	leave("xircom_probe");
 	return 0;
 
 reg_fail:
@@ -310,7 +299,6 @@ static void __devexit xircom_remove(struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct xircom_private *card = netdev_priv(dev);
 
-	enter("xircom_remove");
 	pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle);
 	pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle);
 
@@ -318,7 +306,6 @@ static void __devexit xircom_remove(struct pci_dev *pdev)
 	unregister_netdev(dev);
 	free_netdev(dev);
 	pci_set_drvdata(pdev, NULL);
-	leave("xircom_remove");
 }
 
 static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
@@ -328,17 +315,15 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
 	unsigned int status;
 	int i;
 
-	enter("xircom_interrupt\n");
-
 	spin_lock(&card->lock);
 	status = inl(card->io_port+CSR5);
 
-#ifdef DEBUG
+#if defined DEBUG && DEBUG > 1
 	print_binary(status);
-	printk("tx status 0x%08x 0x%08x\n",
-	       card->tx_buffer[0], card->tx_buffer[4]);
-	printk("rx status 0x%08x 0x%08x\n",
-	       card->rx_buffer[0], card->rx_buffer[4]);
+	pr_debug("tx status 0x%08x 0x%08x\n",
+		 card->tx_buffer[0], card->tx_buffer[4]);
+	pr_debug("rx status 0x%08x 0x%08x\n",
+		 card->rx_buffer[0], card->rx_buffer[4]);
 #endif
 	/* Handle shared irq and hotplug */
 	if (status == 0 || status == 0xffffffff) {
@@ -348,9 +333,9 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
 
 	if (link_status_changed(card)) {
 		int newlink;
-		printk(KERN_DEBUG "xircom_cb: Link status has changed\n");
+		netdev_dbg(dev, "Link status has changed\n");
 		newlink = link_status(card);
-		dev_info(&dev->dev, "Link is %i mbit\n", newlink);
+		netdev_info(dev, "Link is %d mbit\n", newlink);
 		if (newlink)
 			netif_carrier_on(dev);
 		else
@@ -369,9 +354,7 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
 	for (i=0;i<NUMDESCRIPTORS;i++)
 		investigate_read_descriptor(dev,card,i,bufferoffsets[i]);
 
-
 	spin_unlock(&card->lock);
-	leave("xircom_interrupt");
 	return IRQ_HANDLED;
 }
 
@@ -382,7 +365,6 @@ static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,
 	unsigned long flags;
 	int nextdescriptor;
 	int desc;
-	enter("xircom_start_xmit");
 
 	card = netdev_priv(dev);
 	spin_lock_irqsave(&card->lock,flags);
@@ -424,13 +406,10 @@ static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,
 				netif_stop_queue(dev);
 			}
 			card->transmit_used = nextdescriptor;
-			leave("xircom-start_xmit - sent");
 			spin_unlock_irqrestore(&card->lock,flags);
 			return NETDEV_TX_OK;
 	}
 
-
-
 	/* Uh oh... no free descriptor... drop the packet */
 	netif_stop_queue(dev);
 	spin_unlock_irqrestore(&card->lock,flags);
@@ -446,18 +425,16 @@ static int xircom_open(struct net_device *dev)
 {
 	struct xircom_private *xp = netdev_priv(dev);
 	int retval;
-	enter("xircom_open");
-	pr_info("xircom cardbus adaptor found, registering as %s, using irq %i\n",
-		dev->name, dev->irq);
+
+	netdev_info(dev, "xircom cardbus adaptor found, using irq %i\n",
+		    dev->irq);
 	retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev);
-	if (retval) {
-		leave("xircom_open - No IRQ");
+	if (retval)
 		return retval;
-	}
 
 	xircom_up(xp);
 	xp->open = 1;
-	leave("xircom_open");
+
 	return 0;
 }
 
@@ -466,7 +443,6 @@ static int xircom_close(struct net_device *dev)
 	struct xircom_private *card;
 	unsigned long flags;
 
-	enter("xircom_close");
 	card = netdev_priv(dev);
 	netif_stop_queue(dev); /* we don't want new packets */
 
@@ -486,8 +462,6 @@ static int xircom_close(struct net_device *dev)
 	card->open = 0;
 	free_irq(dev->irq,dev);
 
-	leave("xircom_close");
-
 	return 0;
 
 }
@@ -507,8 +481,6 @@ static void initialize_card(struct xircom_private *card)
 {
 	unsigned int val;
 	unsigned long flags;
-	enter("initialize_card");
-
 
 	spin_lock_irqsave(&card->lock, flags);
 
@@ -534,8 +506,6 @@ static void initialize_card(struct xircom_private *card)
 	deactivate_transmitter(card);
 
 	spin_unlock_irqrestore(&card->lock, flags);
-
-	leave("initialize_card");
 }
 
 /*
@@ -547,12 +517,9 @@ ignored; I chose zero.
 static void trigger_transmit(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("trigger_transmit");
 
 	val = 0;
 	outl(val, card->io_port + CSR1);
-
-	leave("trigger_transmit");
 }
 
 /*
@@ -565,12 +532,9 @@ ignored; I chose zero.
 static void trigger_receive(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("trigger_receive");
 
 	val = 0;
 	outl(val, card->io_port + CSR2);
-
-	leave("trigger_receive");
 }
 
 /*
@@ -581,8 +545,6 @@ static void setup_descriptors(struct xircom_private *card)
 {
 	u32 address;
 	int i;
-	enter("setup_descriptors");
-
 
 	BUG_ON(card->rx_buffer == NULL);
 	BUG_ON(card->tx_buffer == NULL);
@@ -636,8 +598,6 @@ static void setup_descriptors(struct xircom_private *card)
 	/* wite the transmit descriptor ring to the card */
 	address = card->tx_dma_handle;
 	outl(address, card->io_port + CSR4);	/* xmit descr list address */
-
-	leave("setup_descriptors");
 }
 
 /*
@@ -647,13 +607,10 @@ valid by setting the address in the card to 0x00.
 static void remove_descriptors(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("remove_descriptors");
 
 	val = 0;
 	outl(val, card->io_port + CSR3);	/* Receive descriptor address */
 	outl(val, card->io_port + CSR4);	/* Send descriptor address */
-
-	leave("remove_descriptors");
 }
 
 /*
@@ -665,21 +622,17 @@ This function also clears the status-bit.
 static int link_status_changed(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("link_status_changed");
 
 	val = inl(card->io_port + CSR5);	/* Status register */
 
-	if ((val & (1 << 27)) == 0) {	/* no change */
-		leave("link_status_changed - nochange");
+	if ((val & (1 << 27)) == 0)		/* no change */
 		return 0;
-	}
 
 	/* clear the event by writing a 1 to the bit in the
 	   status register. */
 	val = (1 << 27);
 	outl(val, card->io_port + CSR5);
 
-	leave("link_status_changed - changed");
 	return 1;
 }
 
@@ -691,16 +644,12 @@ in a non-stopped state.
 static int transmit_active(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("transmit_active");
 
 	val = inl(card->io_port + CSR5);	/* Status register */
 
-	if ((val & (7 << 20)) == 0) {	/* transmitter disabled */
-		leave("transmit_active - inactive");
+	if ((val & (7 << 20)) == 0)		/* transmitter disabled */
 		return 0;
-	}
 
-	leave("transmit_active - active");
 	return 1;
 }
 
@@ -711,17 +660,12 @@ in a non-stopped state.
 static int receive_active(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("receive_active");
-
 
 	val = inl(card->io_port + CSR5);	/* Status register */
 
-	if ((val & (7 << 17)) == 0) {	/* receiver disabled */
-		leave("receive_active - inactive");
+	if ((val & (7 << 17)) == 0)		/* receiver disabled */
 		return 0;
-	}
 
-	leave("receive_active - active");
 	return 1;
 }
 
@@ -739,8 +683,6 @@ static void activate_receiver(struct xircom_private *card)
 {
 	unsigned int val;
 	int counter;
-	enter("activate_receiver");
-
 
 	val = inl(card->io_port + CSR6);	/* Operation mode */
 
@@ -761,7 +703,7 @@ static void activate_receiver(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			pr_err("Receiver failed to deactivate\n");
+			netdev_err(card->dev, "Receiver failed to deactivate\n");
 	}
 
 	/* enable the receiver */
@@ -778,10 +720,9 @@ static void activate_receiver(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			pr_err("Receiver failed to re-activate\n");
+			netdev_err(card->dev,
+				   "Receiver failed to re-activate\n");
 	}
-
-	leave("activate_receiver");
 }
 
 /*
@@ -795,7 +736,6 @@ static void deactivate_receiver(struct xircom_private *card)
 {
 	unsigned int val;
 	int counter;
-	enter("deactivate_receiver");
 
 	val = inl(card->io_port + CSR6);	/* Operation mode */
 	val = val & ~2;				/* disable the receiver */
@@ -809,11 +749,8 @@ static void deactivate_receiver(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			pr_err("Receiver failed to deactivate\n");
+			netdev_err(card->dev, "Receiver failed to deactivate\n");
 	}
-
-
-	leave("deactivate_receiver");
 }
 
 
@@ -831,8 +768,6 @@ static void activate_transmitter(struct xircom_private *card)
 {
 	unsigned int val;
 	int counter;
-	enter("activate_transmitter");
-
 
 	val = inl(card->io_port + CSR6);	/* Operation mode */
 
@@ -852,7 +787,8 @@ static void activate_transmitter(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			pr_err("Transmitter failed to deactivate\n");
+			netdev_err(card->dev,
+				   "Transmitter failed to deactivate\n");
 	}
 
 	/* enable the transmitter */
@@ -869,10 +805,9 @@ static void activate_transmitter(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			pr_err("Transmitter failed to re-activate\n");
+			netdev_err(card->dev,
+				   "Transmitter failed to re-activate\n");
 	}
-
-	leave("activate_transmitter");
 }
 
 /*
@@ -886,7 +821,6 @@ static void deactivate_transmitter(struct xircom_private *card)
 {
 	unsigned int val;
 	int counter;
-	enter("deactivate_transmitter");
 
 	val = inl(card->io_port + CSR6);	/* Operation mode */
 	val = val & ~2;		/* disable the transmitter */
@@ -900,11 +834,9 @@ static void deactivate_transmitter(struct xircom_private *card)
 		udelay(50);
 		counter--;
 		if (counter <= 0)
-			pr_err("Transmitter failed to deactivate\n");
+			netdev_err(card->dev,
+				   "Transmitter failed to deactivate\n");
 	}
-
-
-	leave("deactivate_transmitter");
 }
 
 
@@ -916,13 +848,10 @@ must be called with the lock held and interrupts disabled.
 static void enable_transmit_interrupt(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("enable_transmit_interrupt");
 
 	val = inl(card->io_port + CSR7);	/* Interrupt enable register */
 	val |= 1;				/* enable the transmit interrupt */
 	outl(val, card->io_port + CSR7);
-
-	leave("enable_transmit_interrupt");
 }
 
 
@@ -934,13 +863,10 @@ must be called with the lock held and interrupts disabled.
 static void enable_receive_interrupt(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("enable_receive_interrupt");
 
 	val = inl(card->io_port + CSR7);	/* Interrupt enable register */
 	val = val | (1 << 6);			/* enable the receive interrupt */
 	outl(val, card->io_port + CSR7);
-
-	leave("enable_receive_interrupt");
 }
 
 /*
@@ -951,13 +877,10 @@ must be called with the lock held and interrupts disabled.
 static void enable_link_interrupt(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("enable_link_interrupt");
 
 	val = inl(card->io_port + CSR7);	/* Interrupt enable register */
 	val = val | (1 << 27);			/* enable the link status chage interrupt */
 	outl(val, card->io_port + CSR7);
-
-	leave("enable_link_interrupt");
 }
 
 
@@ -970,12 +893,9 @@ must be called with the lock held and interrupts disabled.
 static void disable_all_interrupts(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("enable_all_interrupts");
 
 	val = 0;				/* disable all interrupts */
 	outl(val, card->io_port + CSR7);
-
-	leave("disable_all_interrupts");
 }
 
 /*
@@ -986,7 +906,6 @@ must be called with the lock held and interrupts disabled.
 static void enable_common_interrupts(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("enable_link_interrupt");
 
 	val = inl(card->io_port + CSR7);	/* Interrupt enable register */
 	val |= (1<<16); /* Normal Interrupt Summary */
@@ -998,8 +917,6 @@ static void enable_common_interrupts(struct xircom_private *card)
 	val |= (1<<2);  /* Transmit Buffer Unavailable */
 	val |= (1<<1);  /* Transmit Process Stopped */
 	outl(val, card->io_port + CSR7);
-
-	leave("enable_link_interrupt");
 }
 
 /*
@@ -1010,13 +927,11 @@ must be called with the lock held and interrupts disabled.
 static int enable_promisc(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("enable_promisc");
 
 	val = inl(card->io_port + CSR6);
 	val = val | (1 << 6);
 	outl(val, card->io_port + CSR6);
 
-	leave("enable_promisc");
 	return 1;
 }
 
@@ -1031,7 +946,6 @@ Must be called in locked state with interrupts disabled
 static int link_status(struct xircom_private *card)
 {
 	unsigned int val;
-	enter("link_status");
 
 	val = inb(card->io_port + CSR12);
 
@@ -1042,7 +956,6 @@ static int link_status(struct xircom_private *card)
 
 	/* If we get here -> no link at all */
 
-	leave("link_status");
 	return 0;
 }
 
@@ -1061,8 +974,6 @@ static void read_mac_address(struct xircom_private *card)
 	unsigned long flags;
 	int i;
 
-	enter("read_mac_address");
-
 	spin_lock_irqsave(&card->lock, flags);
 
 	outl(1 << 12, card->io_port + CSR9);	/* enable boot rom access */
@@ -1090,7 +1001,6 @@ static void read_mac_address(struct xircom_private *card)
 	}
 	spin_unlock_irqrestore(&card->lock, flags);
 	pr_debug(" %pM\n", card->dev->dev_addr);
-	leave("read_mac_address");
 }
 
 
@@ -1103,8 +1013,6 @@ static void transceiver_voodoo(struct xircom_private *card)
 {
 	unsigned long flags;
 
-	enter("transceiver_voodoo");
-
 	/* disable all powermanagement */
 	pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000);
 
@@ -1122,7 +1030,6 @@ static void transceiver_voodoo(struct xircom_private *card)
         spin_unlock_irqrestore(&card->lock, flags);
 
 	netif_start_queue(card->dev);
-	leave("transceiver_voodoo");
 }
 
 
@@ -1131,8 +1038,6 @@ static void xircom_up(struct xircom_private *card)
 	unsigned long flags;
 	int i;
 
-	enter("xircom_up");
-
 	/* disable all powermanagement */
 	pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000);
 
@@ -1156,87 +1061,84 @@ static void xircom_up(struct xircom_private *card)
 	trigger_receive(card);
 	trigger_transmit(card);
 	netif_start_queue(card->dev);
-	leave("xircom_up");
 }
 
 /* Bufferoffset is in BYTES */
-static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset)
+static void
+investigate_read_descriptor(struct net_device *dev, struct xircom_private *card,
+			    int descnr, unsigned int bufferoffset)
 {
-		int status;
-
-		enter("investigate_read_descriptor");
-		status = le32_to_cpu(card->rx_buffer[4*descnr]);
+	int status;
 
-		if ((status > 0)) {	/* packet received */
+	status = le32_to_cpu(card->rx_buffer[4*descnr]);
 
-			/* TODO: discard error packets */
+	if (status > 0) {		/* packet received */
 
-			short pkt_len = ((status >> 16) & 0x7ff) - 4;	/* minus 4, we don't want the CRC */
-			struct sk_buff *skb;
+		/* TODO: discard error packets */
 
-			if (pkt_len > 1518) {
-				pr_err("Packet length %i is bogus\n", pkt_len);
-				pkt_len = 1518;
-			}
+		short pkt_len = ((status >> 16) & 0x7ff) - 4;
+					/* minus 4, we don't want the CRC */
+		struct sk_buff *skb;
 
-			skb = dev_alloc_skb(pkt_len + 2);
-			if (skb == NULL) {
-				dev->stats.rx_dropped++;
-				goto out;
-			}
-			skb_reserve(skb, 2);
-			skb_copy_to_linear_data(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len);
-			skb_put(skb, pkt_len);
-			skb->protocol = eth_type_trans(skb, dev);
-			netif_rx(skb);
-			dev->stats.rx_packets++;
-			dev->stats.rx_bytes += pkt_len;
-
-		      out:
-			/* give the buffer back to the card */
-			card->rx_buffer[4*descnr] =  cpu_to_le32(0x80000000);
-			trigger_receive(card);
+		if (pkt_len > 1518) {
+			netdev_err(dev, "Packet length %i is bogus\n", pkt_len);
+			pkt_len = 1518;
 		}
 
-		leave("investigate_read_descriptor");
-
+		skb = dev_alloc_skb(pkt_len + 2);
+		if (skb == NULL) {
+			dev->stats.rx_dropped++;
+			goto out;
+		}
+		skb_reserve(skb, 2);
+		skb_copy_to_linear_data(skb,
+					&card->rx_buffer[bufferoffset / 4],
+					pkt_len);
+		skb_put(skb, pkt_len);
+		skb->protocol = eth_type_trans(skb, dev);
+		netif_rx(skb);
+		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += pkt_len;
+
+out:
+		/* give the buffer back to the card */
+		card->rx_buffer[4*descnr] = cpu_to_le32(0x80000000);
+		trigger_receive(card);
+	}
 }
 
 
 /* Bufferoffset is in BYTES */
-static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset)
+static void
+investigate_write_descriptor(struct net_device *dev,
+			     struct xircom_private *card,
+			     int descnr, unsigned int bufferoffset)
 {
-		int status;
-
-		enter("investigate_write_descriptor");
+	int status;
 
-		status = le32_to_cpu(card->tx_buffer[4*descnr]);
+	status = le32_to_cpu(card->tx_buffer[4*descnr]);
 #if 0
-		if (status & 0x8000) {	/* Major error */
-			pr_err("Major transmit error status %x\n", status);
-			card->tx_buffer[4*descnr] = 0;
-			netif_wake_queue (dev);
-		}
+	if (status & 0x8000) {	/* Major error */
+		pr_err("Major transmit error status %x\n", status);
+		card->tx_buffer[4*descnr] = 0;
+		netif_wake_queue (dev);
+	}
 #endif
-		if (status > 0) {	/* bit 31 is 0 when done */
-			if (card->tx_skb[descnr]!=NULL) {
-				dev->stats.tx_bytes += card->tx_skb[descnr]->len;
-				dev_kfree_skb_irq(card->tx_skb[descnr]);
-			}
-			card->tx_skb[descnr] = NULL;
-			/* Bit 8 in the status field is 1 if there was a collision */
-			if (status&(1<<8))
-				dev->stats.collisions++;
-			card->tx_buffer[4*descnr] = 0; /* descriptor is free again */
-			netif_wake_queue (dev);
-			dev->stats.tx_packets++;
+	if (status > 0) {	/* bit 31 is 0 when done */
+		if (card->tx_skb[descnr]!=NULL) {
+			dev->stats.tx_bytes += card->tx_skb[descnr]->len;
+			dev_kfree_skb_irq(card->tx_skb[descnr]);
 		}
-
-		leave("investigate_write_descriptor");
-
+		card->tx_skb[descnr] = NULL;
+		/* Bit 8 in the status field is 1 if there was a collision */
+		if (status & (1 << 8))
+			dev->stats.collisions++;
+		card->tx_buffer[4*descnr] = 0; /* descriptor is free again */
+		netif_wake_queue (dev);
+		dev->stats.tx_packets++;
+	}
 }
 
-
 static int __init xircom_init(void)
 {
 	return pci_register_driver(&xircom_ops);
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index f5e9ac00a07..74e94054ab1 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -123,6 +123,9 @@ struct tun_struct {
 	gid_t			group;
 
 	struct net_device	*dev;
+	u32			set_features;
+#define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \
+			  NETIF_F_TSO6|NETIF_F_UFO)
 	struct fasync_struct	*fasync;
 
 	struct tap_filter       txflt;
@@ -451,12 +454,20 @@ tun_net_change_mtu(struct net_device *dev, int new_mtu)
 	return 0;
 }
 
+static u32 tun_net_fix_features(struct net_device *dev, u32 features)
+{
+	struct tun_struct *tun = netdev_priv(dev);
+
+	return (features & tun->set_features) | (features & ~TUN_USER_FEATURES);
+}
+
 static const struct net_device_ops tun_netdev_ops = {
 	.ndo_uninit		= tun_net_uninit,
 	.ndo_open		= tun_net_open,
 	.ndo_stop		= tun_net_close,
 	.ndo_start_xmit		= tun_net_xmit,
 	.ndo_change_mtu		= tun_net_change_mtu,
+	.ndo_fix_features	= tun_net_fix_features,
 };
 
 static const struct net_device_ops tap_netdev_ops = {
@@ -465,6 +476,7 @@ static const struct net_device_ops tap_netdev_ops = {
 	.ndo_stop		= tun_net_close,
 	.ndo_start_xmit		= tun_net_xmit,
 	.ndo_change_mtu		= tun_net_change_mtu,
+	.ndo_fix_features	= tun_net_fix_features,
 	.ndo_set_multicast_list	= tun_net_mclist,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -628,8 +640,7 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun,
 			kfree_skb(skb);
 			return -EINVAL;
 		}
-	} else if (tun->flags & TUN_NOCHECKSUM)
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
+	}
 
 	switch (tun->flags & TUN_TYPE_MASK) {
 	case TUN_TUN_DEV:
@@ -1088,11 +1099,9 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 
 		tun_net_init(dev);
 
-		if (strchr(dev->name, '%')) {
-			err = dev_alloc_name(dev, dev->name);
-			if (err < 0)
-				goto err_free_sk;
-		}
+		dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST |
+			TUN_USER_FEATURES;
+		dev->features = dev->hw_features;
 
 		err = register_netdevice(tun->dev);
 		if (err < 0)
@@ -1158,18 +1167,12 @@ static int tun_get_iff(struct net *net, struct tun_struct *tun,
 
 /* This is like a cut-down ethtool ops, except done via tun fd so no
  * privs required. */
-static int set_offload(struct net_device *dev, unsigned long arg)
+static int set_offload(struct tun_struct *tun, unsigned long arg)
 {
-	u32 old_features, features;
-
-	old_features = dev->features;
-	/* Unset features, set them as we chew on the arg. */
-	features = (old_features & ~(NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST
-				    |NETIF_F_TSO_ECN|NETIF_F_TSO|NETIF_F_TSO6
-				    |NETIF_F_UFO));
+	u32 features = 0;
 
 	if (arg & TUN_F_CSUM) {
-		features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
+		features |= NETIF_F_HW_CSUM;
 		arg &= ~TUN_F_CSUM;
 
 		if (arg & (TUN_F_TSO4|TUN_F_TSO6)) {
@@ -1195,9 +1198,8 @@ static int set_offload(struct net_device *dev, unsigned long arg)
 	if (arg)
 		return -EINVAL;
 
-	dev->features = features;
-	if (old_features != dev->features)
-		netdev_features_change(dev);
+	tun->set_features = features;
+	netdev_update_features(tun->dev);
 
 	return 0;
 }
@@ -1262,12 +1264,9 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
 
 	case TUNSETNOCSUM:
 		/* Disable/Enable checksum */
-		if (arg)
-			tun->flags |= TUN_NOCHECKSUM;
-		else
-			tun->flags &= ~TUN_NOCHECKSUM;
 
-		tun_debug(KERN_INFO, tun, "checksum %s\n",
+		/* [unimplemented] */
+		tun_debug(KERN_INFO, tun, "ignored: set checksum %s\n",
 			  arg ? "disabled" : "enabled");
 		break;
 
@@ -1316,7 +1315,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
 		break;
 #endif
 	case TUNSETOFFLOAD:
-		ret = set_offload(tun->dev, arg);
+		ret = set_offload(tun, arg);
 		break;
 
 	case TUNSETTXFILTER:
@@ -1548,7 +1547,7 @@ static int tun_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	cmd->supported		= 0;
 	cmd->advertising	= 0;
-	cmd->speed		= SPEED_10;
+	ethtool_cmd_speed_set(cmd, SPEED_10);
 	cmd->duplex		= DUPLEX_FULL;
 	cmd->port		= PORT_TP;
 	cmd->phy_address	= 0;
@@ -1595,30 +1594,12 @@ static void tun_set_msglevel(struct net_device *dev, u32 value)
 #endif
 }
 
-static u32 tun_get_rx_csum(struct net_device *dev)
-{
-	struct tun_struct *tun = netdev_priv(dev);
-	return (tun->flags & TUN_NOCHECKSUM) == 0;
-}
-
-static int tun_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct tun_struct *tun = netdev_priv(dev);
-	if (data)
-		tun->flags &= ~TUN_NOCHECKSUM;
-	else
-		tun->flags |= TUN_NOCHECKSUM;
-	return 0;
-}
-
 static const struct ethtool_ops tun_ethtool_ops = {
 	.get_settings	= tun_get_settings,
 	.get_drvinfo	= tun_get_drvinfo,
 	.get_msglevel	= tun_get_msglevel,
 	.set_msglevel	= tun_set_msglevel,
 	.get_link	= ethtool_op_get_link,
-	.get_rx_csum	= tun_get_rx_csum,
-	.set_rx_csum	= tun_set_rx_csum
 };
 
 
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 7fa5ec2de94..3de4283344e 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -846,7 +846,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
 	if(typhoon_num_free_tx(txRing) < (numDesc + 2)) {
 		netif_stop_queue(dev);
 
-		/* A Tx complete IRQ could have gotten inbetween, making
+		/* A Tx complete IRQ could have gotten between, making
 		 * the ring free again. Only need to recheck here, since
 		 * Tx is serialized.
 		 */
@@ -1050,7 +1050,7 @@ typhoon_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	/* need to get stats to make these link speed/duplex valid */
 	typhoon_do_get_stats(tp);
-	cmd->speed = tp->speed;
+	ethtool_cmd_speed_set(cmd, tp->speed);
 	cmd->duplex = tp->duplex;
 	cmd->phy_address = 0;
 	cmd->transceiver = XCVR_INTERNAL;
@@ -1068,25 +1068,26 @@ static int
 typhoon_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct typhoon *tp = netdev_priv(dev);
+	u32 speed = ethtool_cmd_speed(cmd);
 	struct cmd_desc xp_cmd;
 	__le16 xcvr;
 	int err;
 
 	err = -EINVAL;
-	if(cmd->autoneg == AUTONEG_ENABLE) {
+	if (cmd->autoneg == AUTONEG_ENABLE) {
 		xcvr = TYPHOON_XCVR_AUTONEG;
 	} else {
-		if(cmd->duplex == DUPLEX_HALF) {
-			if(cmd->speed == SPEED_10)
+		if (cmd->duplex == DUPLEX_HALF) {
+			if (speed == SPEED_10)
 				xcvr = TYPHOON_XCVR_10HALF;
-			else if(cmd->speed == SPEED_100)
+			else if (speed == SPEED_100)
 				xcvr = TYPHOON_XCVR_100HALF;
 			else
 				goto out;
-		} else if(cmd->duplex == DUPLEX_FULL) {
-			if(cmd->speed == SPEED_10)
+		} else if (cmd->duplex == DUPLEX_FULL) {
+			if (speed == SPEED_10)
 				xcvr = TYPHOON_XCVR_10FULL;
-			else if(cmd->speed == SPEED_100)
+			else if (speed == SPEED_100)
 				xcvr = TYPHOON_XCVR_100FULL;
 			else
 				goto out;
@@ -1105,7 +1106,7 @@ typhoon_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		tp->speed = 0xff;	/* invalid */
 		tp->duplex = 0xff;	/* invalid */
 	} else {
-		tp->speed = cmd->speed;
+		tp->speed = speed;
 		tp->duplex = cmd->duplex;
 	}
 
@@ -1144,28 +1145,6 @@ typhoon_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
-static u32
-typhoon_get_rx_csum(struct net_device *dev)
-{
-	/* For now, we don't allow turning off RX checksums.
-	 */
-	return 1;
-}
-
-static int
-typhoon_set_flags(struct net_device *dev, u32 data)
-{
-	/* There's no way to turn off the RX VLAN offloading and stripping
-	 * on the current 3XP firmware -- it does not respect the offload
-	 * settings -- so we only allow the user to toggle the TX processing.
-	 */
-	if (!(data & ETH_FLAG_RXVLAN))
-		return -EINVAL;
-
-	return ethtool_op_set_flags(dev, data,
-				    ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN);
-}
-
 static void
 typhoon_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
 {
@@ -1187,13 +1166,7 @@ static const struct ethtool_ops typhoon_ethtool_ops = {
 	.get_wol		= typhoon_get_wol,
 	.set_wol		= typhoon_set_wol,
 	.get_link		= ethtool_op_get_link,
-	.get_rx_csum		= typhoon_get_rx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_csum,
-	.set_sg			= ethtool_op_set_sg,
-	.set_tso		= ethtool_op_set_tso,
 	.get_ringparam		= typhoon_get_ringparam,
-	.set_flags		= typhoon_set_flags,
-	.get_flags		= ethtool_op_get_flags,
 };
 
 static int
@@ -2482,10 +2455,15 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* We can handle scatter gather, up to 16 entries, and
 	 * we can do IP checksumming (only version 4, doh...)
+	 *
+	 * There's no way to turn off the RX VLAN offloading and stripping
+	 * on the current 3XP firmware -- it does not respect the offload
+	 * settings -- so we only allow the user to toggle the TX processing.
 	 */
-	dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
-	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-	dev->features |= NETIF_F_TSO;
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+		NETIF_F_HW_VLAN_TX;
+	dev->features = dev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_RXCSUM;
 
 	if(register_netdev(dev) < 0) {
 		err_msg = "unable to register netdev";
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 055b87ab4f0..d12fcad145e 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -80,7 +80,7 @@ struct ucc_geth {
 				   frames) received that were between 128
 				   (Including FCS length==4) and 255 octets */
 	u32 txok;		/* Total number of octets residing in frames
-				   that where involved in successfull
+				   that where involved in successful
 				   transmission */
 	u16 txcf;		/* Total number of PAUSE control frames
 				   transmitted by this MAC */
@@ -759,7 +759,7 @@ struct ucc_geth_hardware_statistics {
 				   frames) received that were between 128
 				   (Including FCS length==4) and 255 octets */
 	u32 txok;		/* Total number of octets residing in frames
-				   that where involved in successfull
+				   that where involved in successful
 				   transmission */
 	u16 txcf;		/* Total number of PAUSE control frames
 				   transmitted by this MAC */
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6f92e48f02d..537fbc0a440 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -410,7 +410,6 @@ static const struct ethtool_ops uec_ethtool_ops = {
 	.set_ringparam          = uec_set_ringparam,
 	.get_pauseparam         = uec_get_pauseparam,
 	.set_pauseparam         = uec_set_pauseparam,
-	.set_sg                 = ethtool_op_set_sg,
 	.get_sset_count		= uec_get_sset_count,
 	.get_strings            = uec_get_strings,
 	.get_ethtool_stats      = uec_get_ethtool_stats,
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 3ec22c30779..9d4f9117260 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -258,7 +258,7 @@ config USB_NET_NET1080
 	  optionally with LEDs that indicate traffic
 
 config USB_NET_PLUSB
-	tristate "Prolific PL-2301/2302 based cables"
+	tristate "Prolific PL-2301/2302/25A1 based cables"
 	# if the handshake/init/reset problems, from original 'plusb',
 	# are ever resolved ... then remove "experimental"
 	depends on USB_USBNET && EXPERIMENTAL
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 6140b56cce5..6998aa6b7bb 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -847,7 +847,7 @@ static void ax88172_set_multicast(struct net_device *net)
 static int ax88172_link_reset(struct usbnet *dev)
 {
 	u8 mode;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
@@ -856,8 +856,8 @@ static int ax88172_link_reset(struct usbnet *dev)
 	if (ecmd.duplex != DUPLEX_FULL)
 		mode |= ~AX88172_MEDIUM_FD;
 
-	netdev_dbg(dev->net, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
-		   ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
@@ -947,20 +947,20 @@ static const struct ethtool_ops ax88772_ethtool_ops = {
 static int ax88772_link_reset(struct usbnet *dev)
 {
 	u16 mode;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
 	mode = AX88772_MEDIUM_DEFAULT;
 
-	if (ecmd.speed != SPEED_100)
+	if (ethtool_cmd_speed(&ecmd) != SPEED_100)
 		mode &= ~AX_MEDIUM_PS;
 
 	if (ecmd.duplex != DUPLEX_FULL)
 		mode &= ~AX_MEDIUM_FD;
 
-	netdev_dbg(dev->net, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
-		   ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
@@ -1173,18 +1173,20 @@ static int marvell_led_status(struct usbnet *dev, u16 speed)
 static int ax88178_link_reset(struct usbnet *dev)
 {
 	u16 mode;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 	struct asix_data *data = (struct asix_data *)&dev->data;
+	u32 speed;
 
 	netdev_dbg(dev->net, "ax88178_link_reset()\n");
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
 	mode = AX88178_MEDIUM_DEFAULT;
+	speed = ethtool_cmd_speed(&ecmd);
 
-	if (ecmd.speed == SPEED_1000)
+	if (speed == SPEED_1000)
 		mode |= AX_MEDIUM_GM;
-	else if (ecmd.speed == SPEED_100)
+	else if (speed == SPEED_100)
 		mode |= AX_MEDIUM_PS;
 	else
 		mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
@@ -1196,13 +1198,13 @@ static int ax88178_link_reset(struct usbnet *dev)
 	else
 		mode &= ~AX_MEDIUM_FD;
 
-	netdev_dbg(dev->net, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
-		   ecmd.speed, ecmd.duplex, mode);
+	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   speed, ecmd.duplex, mode);
 
 	asix_write_medium_mode(dev, mode);
 
 	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
-		marvell_led_status(dev, ecmd.speed);
+		marvell_led_status(dev, speed);
 
 	return 0;
 }
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 97687d33590..d7221c4a5dc 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -686,7 +686,7 @@ static int catc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_TP;
 	cmd->advertising = ADVERTISED_10baseT_Half | ADVERTISED_TP;
-	cmd->speed = SPEED_10;
+	ethtool_cmd_speed_set(cmd, SPEED_10);
 	cmd->duplex = DUPLEX_HALF;
 	cmd->port = PORT_TP; 
 	cmd->phy_address = 0;
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 8f128541656..882f53f708d 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -190,7 +190,7 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 		/*
 		 * EEM packet header format:
-		 * b0..14:	EEM type dependant (Data or Command)
+		 * b0..14:	EEM type dependent (Data or Command)
 		 * b15:		bmType
 		 */
 		header = get_unaligned_le16(skb->data);
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 341f7056a80..c924ea2bce0 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -460,7 +460,7 @@ static const struct driver_info	cdc_info = {
 	.manage_power =	cdc_manage_power,
 };
 
-static const struct driver_info mbm_info = {
+static const struct driver_info wwan_info = {
 	.description =	"Mobile Broadband Network Device",
 	.flags =	FLAG_WWAN,
 	.bind =		usbnet_cdc_bind,
@@ -471,6 +471,7 @@ static const struct driver_info mbm_info = {
 
 /*-------------------------------------------------------------------------*/
 
+#define HUAWEI_VENDOR_ID	0x12D1
 
 static const struct usb_device_id	products [] = {
 /*
@@ -566,7 +567,7 @@ static const struct usb_device_id	products [] = {
 {
 	USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
-	.driver_info		= 0,
+	.driver_info = (unsigned long)&wwan_info,
 },
 
 /*
@@ -587,8 +588,17 @@ static const struct usb_device_id	products [] = {
 }, {
 	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
 			USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long)&mbm_info,
+	.driver_info = (unsigned long)&wwan_info,
 
+}, {
+	/* Various Huawei modems with a network port like the UMG1831 */
+	.match_flags    =   USB_DEVICE_ID_MATCH_VENDOR
+		 | USB_DEVICE_ID_MATCH_INT_INFO,
+	.idVendor               = HUAWEI_VENDOR_ID,
+	.bInterfaceClass	= USB_CLASS_COMM,
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET,
+	.bInterfaceProtocol	= 255,
+	.driver_info = (unsigned long)&wwan_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 967371f0445..4ab557d0287 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -54,7 +54,7 @@
 #include <linux/usb/usbnet.h>
 #include <linux/usb/cdc.h>
 
-#define	DRIVER_VERSION				"7-Feb-2011"
+#define	DRIVER_VERSION				"06-May-2011"
 
 /* CDC NCM subclass 3.2.1 */
 #define USB_CDC_NCM_NDP16_LENGTH_MIN		0x10
@@ -722,7 +722,7 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
 
 	} else {
 		/* reset variables */
-		skb_out = alloc_skb(ctx->tx_max, GFP_ATOMIC);
+		skb_out = alloc_skb((ctx->tx_max + 1), GFP_ATOMIC);
 		if (skb_out == NULL) {
 			if (skb != NULL) {
 				dev_kfree_skb_any(skb);
@@ -861,8 +861,11 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
 	/* store last offset */
 	last_offset = offset;
 
-	if ((last_offset < ctx->tx_max) && ((last_offset %
-			le16_to_cpu(ctx->out_ep->desc.wMaxPacketSize)) == 0)) {
+	if (((last_offset < ctx->tx_max) && ((last_offset %
+			le16_to_cpu(ctx->out_ep->desc.wMaxPacketSize)) == 0)) ||
+	    (((last_offset == ctx->tx_max) && ((ctx->tx_max %
+		le16_to_cpu(ctx->out_ep->desc.wMaxPacketSize)) == 0)) &&
+		(ctx->tx_max < le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize)))) {
 		/* force short packet */
 		*(((u8 *)skb_out->data) + last_offset) = 0;
 		last_offset++;
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 5002f5be47b..1d93133e9b7 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -599,13 +599,13 @@ static void dm9601_status(struct usbnet *dev, struct urb *urb)
 
 static int dm9601_link_reset(struct usbnet *dev)
 {
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 
 	mii_check_media(&dev->mii, 1, 1);
 	mii_ethtool_gset(&dev->mii, &ecmd);
 
-	netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
-		   ecmd.speed, ecmd.duplex);
+	netdev_dbg(dev->net, "link_reset() speed: %u duplex: %d\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex);
 
 	return 0;
 }
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 7d42f9a2c06..81126ff85e0 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -65,6 +65,7 @@
 #define IPHETH_USBINTF_PROTO    1
 
 #define IPHETH_BUF_SIZE         1516
+#define IPHETH_IP_ALIGN		2	/* padding at front of URB */
 #define IPHETH_TX_TIMEOUT       (5 * HZ)
 
 #define IPHETH_INTFNUM          2
@@ -202,18 +203,21 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
 		return;
 	}
 
-	len = urb->actual_length;
-	buf = urb->transfer_buffer;
+	if (urb->actual_length <= IPHETH_IP_ALIGN) {
+		dev->net->stats.rx_length_errors++;
+		return;
+	}
+	len = urb->actual_length - IPHETH_IP_ALIGN;
+	buf = urb->transfer_buffer + IPHETH_IP_ALIGN;
 
-	skb = dev_alloc_skb(NET_IP_ALIGN + len);
+	skb = dev_alloc_skb(len);
 	if (!skb) {
 		err("%s: dev_alloc_skb: -ENOMEM", __func__);
 		dev->net->stats.rx_dropped++;
 		return;
 	}
 
-	skb_reserve(skb, NET_IP_ALIGN);
-	memcpy(skb_put(skb, len), buf + NET_IP_ALIGN, len - NET_IP_ALIGN);
+	memcpy(skb_put(skb, len), buf, len);
 	skb->dev = dev->net;
 	skb->protocol = eth_type_trans(skb, dev->net);
 
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 7dc84971f26..ad0298f9b5f 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -1221,7 +1221,7 @@ static void kaweth_disconnect(struct usb_interface *intf)
 
 	usb_set_intfdata(intf, NULL);
 	if (!kaweth) {
-		dev_warn(&intf->dev, "unregistering non-existant device\n");
+		dev_warn(&intf->dev, "unregistering non-existent device\n");
 		return;
 	}
 	netdev = kaweth->net;
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 823c5375130..217aec8a768 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -45,6 +45,14 @@
  * seems to get wedged under load.  Prolific docs are weak, and
  * don't identify differences between PL2301 and PL2302, much less
  * anything to explain the different PL2302 versions observed.
+ *
+ * NOTE:  pl2501 has several modes, including pl2301 and pl2302
+ * compatibility.   Some docs suggest the difference between 2301
+ * and 2302 is only to make MS-Windows use a different driver...
+ *
+ * pl25a1 glue based on patch from Tony Gibbs.  Prolific "docs" on
+ * this chip are as usual incomplete about what control messages
+ * are supported.
  */
 
 /*
@@ -86,16 +94,20 @@ pl_set_QuickLink_features(struct usbnet *dev, int val)
 
 static int pl_reset(struct usbnet *dev)
 {
+	int status;
+
 	/* some units seem to need this reset, others reject it utterly.
 	 * FIXME be more like "naplink" or windows drivers.
 	 */
-	(void) pl_set_QuickLink_features(dev,
+	status = pl_set_QuickLink_features(dev,
 		PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
+	if (status != 0 && netif_msg_probe(dev))
+		netif_dbg(dev, link, dev->net, "pl_reset --> %d\n", status);
 	return 0;
 }
 
 static const struct driver_info	prolific_info = {
-	.description =	"Prolific PL-2301/PL-2302",
+	.description =	"Prolific PL-2301/PL-2302/PL-25A1",
 	.flags =	FLAG_POINTTOPOINT | FLAG_NO_SETINT,
 		/* some PL-2302 versions seem to fail usb_set_interface() */
 	.reset =	pl_reset,
@@ -111,6 +123,7 @@ static const struct driver_info	prolific_info = {
 
 static const struct usb_device_id	products [] = {
 
+/* full speed cables */
 {
 	USB_DEVICE(0x067b, 0x0000),	// PL-2301
 	.driver_info =	(unsigned long) &prolific_info,
@@ -119,6 +132,15 @@ static const struct usb_device_id	products [] = {
 	.driver_info =	(unsigned long) &prolific_info,
 },
 
+/* high speed cables */
+{
+	USB_DEVICE(0x067b, 0x25a1),     /* PL-25A1, no eeprom */
+	.driver_info =  (unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x050d, 0x258a),     /* Belkin F5U258/F5U279 (PL-25A1) */
+	.driver_info =  (unsigned long) &prolific_info,
+},
+
 	{ },		// END
 };
 MODULE_DEVICE_TABLE(usb, products);
@@ -134,16 +156,16 @@ static struct usb_driver plusb_driver = {
 
 static int __init plusb_init(void)
 {
- 	return usb_register(&plusb_driver);
+	return usb_register(&plusb_driver);
 }
 module_init(plusb_init);
 
 static void __exit plusb_exit(void)
 {
- 	usb_deregister(&plusb_driver);
+	usb_deregister(&plusb_driver);
 }
 module_exit(plusb_exit);
 
 MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("Prolific PL-2301/2302 USB Host to Host Link Driver");
+MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1 USB Host to Host Link Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 5994a25c56a..255d6a424a6 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -104,8 +104,10 @@ static void rndis_msg_indicate(struct usbnet *dev, struct rndis_indicate *msg,
 int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
 {
 	struct cdc_state	*info = (void *) &dev->data;
+	struct usb_cdc_notification notification;
 	int			master_ifnum;
 	int			retval;
+	int			partial;
 	unsigned		count;
 	__le32			rsp;
 	u32			xid = 0, msg_len, request_id;
@@ -133,13 +135,20 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
 	if (unlikely(retval < 0 || xid == 0))
 		return retval;
 
-	// FIXME Seems like some devices discard responses when
-	// we time out and cancel our "get response" requests...
-	// so, this is fragile.  Probably need to poll for status.
+	/* Some devices don't respond on the control channel until
+	 * polled on the status channel, so do that first. */
+	if (dev->driver_info->data & RNDIS_DRIVER_DATA_POLL_STATUS) {
+		retval = usb_interrupt_msg(
+			dev->udev,
+			usb_rcvintpipe(dev->udev,
+				       dev->status->desc.bEndpointAddress),
+			&notification, sizeof(notification), &partial,
+			RNDIS_CONTROL_TIMEOUT_MS);
+		if (unlikely(retval < 0))
+			return retval;
+	}
 
-	/* ignore status endpoint, just poll the control channel;
-	 * the request probably completed immediately
-	 */
+	/* Poll the control channel; the request probably completed immediately */
 	rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
 	for (count = 0; count < 10; count++) {
 		memset(buf, 0, CONTROL_BUFFER_SIZE);
@@ -581,17 +590,33 @@ static const struct driver_info	rndis_info = {
 	.tx_fixup =	rndis_tx_fixup,
 };
 
+static const struct driver_info	rndis_poll_status_info = {
+	.description =	"RNDIS device (poll status before control)",
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+	.data =		RNDIS_DRIVER_DATA_POLL_STATUS,
+	.bind =		rndis_bind,
+	.unbind =	rndis_unbind,
+	.status =	rndis_status,
+	.rx_fixup =	rndis_rx_fixup,
+	.tx_fixup =	rndis_tx_fixup,
+};
+
 /*-------------------------------------------------------------------------*/
 
 static const struct usb_device_id	products [] = {
 {
+	/* 2Wire HomePortal 1000SW */
+	USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0042,
+				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+	.driver_info = (unsigned long) &rndis_poll_status_info,
+}, {
 	/* RNDIS is MSFT's un-official variant of CDC ACM */
 	USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
 	.driver_info = (unsigned long) &rndis_info,
 }, {
 	/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
 	USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
-	.driver_info = (unsigned long) &rndis_info,
+	.driver_info = (unsigned long) &rndis_poll_status_info,
 }, {
 	/* RNDIS for tethering */
 	USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index e85c89c6706..041fb7d43c4 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -843,10 +843,11 @@ static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *e
 	get_registers(dev, BMCR, 2, &bmcr);
 	get_registers(dev, ANLP, 2, &lpa);
 	if (bmcr & BMCR_ANENABLE) {
+		u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
+			     SPEED_100 : SPEED_10);
+		ethtool_cmd_speed_set(ecmd, speed);
 		ecmd->autoneg = AUTONEG_ENABLE;
-		ecmd->speed = (lpa & (LPA_100HALF | LPA_100FULL)) ?
-			     SPEED_100 : SPEED_10;
-		if (ecmd->speed == SPEED_100)
+		if (speed == SPEED_100)
 			ecmd->duplex = (lpa & LPA_100FULL) ?
 			    DUPLEX_FULL : DUPLEX_HALF;
 		else
@@ -854,8 +855,8 @@ static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *e
 			    DUPLEX_FULL : DUPLEX_HALF;
 	} else {
 		ecmd->autoneg = AUTONEG_DISABLE;
-		ecmd->speed = (bmcr & BMCR_SPEED100) ?
-		    SPEED_100 : SPEED_10;
+		ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
+					     SPEED_100 : SPEED_10));
 		ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
 		    DUPLEX_FULL : DUPLEX_HALF;
 	}
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 753ee6eb7ed..15b3d6888ae 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -65,7 +65,6 @@ struct smsc75xx_priv {
 	struct usbnet *dev;
 	u32 rfe_ctl;
 	u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
-	bool use_rx_csum;
 	struct mutex dataport_mutex;
 	spinlock_t rfe_ctl_lock;
 	struct work_struct set_multicast;
@@ -504,7 +503,7 @@ static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
 static int smsc75xx_link_reset(struct usbnet *dev)
 {
 	struct mii_if_info *mii = &dev->mii;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 	u16 lcladv, rmtadv;
 	int ret;
 
@@ -520,8 +519,9 @@ static int smsc75xx_link_reset(struct usbnet *dev)
 	lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
 	rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
 
-	netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x"
-		" rmtadv: %04x", ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+	netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x"
+		  " rmtadv: %04x", ethtool_cmd_speed(&ecmd),
+		  ecmd.duplex, lcladv, rmtadv);
 
 	return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
 }
@@ -548,28 +548,6 @@ static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
 			"unexpected interrupt, intdata=0x%08X", intdata);
 }
 
-/* Enable or disable Rx checksum offload engine */
-static int smsc75xx_set_rx_csum_offload(struct usbnet *dev)
-{
-	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
-
-	if (pdata->use_rx_csum)
-		pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
-	else
-		pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
-
-	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
-
-	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
-	check_warn_return(ret, "Error writing RFE_CTL");
-
-	return 0;
-}
-
 static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
 {
 	return MAX_EEPROM_SIZE;
@@ -599,34 +577,6 @@ static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
 	return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
 }
 
-static u32 smsc75xx_ethtool_get_rx_csum(struct net_device *netdev)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
-
-	return pdata->use_rx_csum;
-}
-
-static int smsc75xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
-
-	pdata->use_rx_csum = !!val;
-
-	return smsc75xx_set_rx_csum_offload(dev);
-}
-
-static int smsc75xx_ethtool_set_tso(struct net_device *netdev, u32 data)
-{
-	if (data)
-		netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
-	else
-		netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
-	return 0;
-}
-
 static const struct ethtool_ops smsc75xx_ethtool_ops = {
 	.get_link	= usbnet_get_link,
 	.nway_reset	= usbnet_nway_reset,
@@ -638,12 +588,6 @@ static const struct ethtool_ops smsc75xx_ethtool_ops = {
 	.get_eeprom_len	= smsc75xx_ethtool_get_eeprom_len,
 	.get_eeprom	= smsc75xx_ethtool_get_eeprom,
 	.set_eeprom	= smsc75xx_ethtool_set_eeprom,
-	.get_tx_csum	= ethtool_op_get_tx_csum,
-	.set_tx_csum	= ethtool_op_set_tx_hw_csum,
-	.get_rx_csum	= smsc75xx_ethtool_get_rx_csum,
-	.set_rx_csum	= smsc75xx_ethtool_set_rx_csum,
-	.get_tso	= ethtool_op_get_tso,
-	.set_tso	= smsc75xx_ethtool_set_tso,
 };
 
 static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -782,6 +726,30 @@ static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
 	return usbnet_change_mtu(netdev, new_mtu);
 }
 
+/* Enable or disable Rx checksum offload engine */
+static int smsc75xx_set_features(struct net_device *netdev, u32 features)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	if (features & NETIF_F_RXCSUM)
+		pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
+	else
+		pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+	/* it's racing here! */
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	check_warn_return(ret, "Error writing RFE_CTL");
+
+	return 0;
+}
+
 static int smsc75xx_reset(struct usbnet *dev)
 {
 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
@@ -960,11 +928,7 @@ static int smsc75xx_reset(struct usbnet *dev)
 	netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
 
 	/* Enable or disable checksum offload engines */
-	ethtool_op_set_tx_hw_csum(dev->net, DEFAULT_TX_CSUM_ENABLE);
-	ret = smsc75xx_set_rx_csum_offload(dev);
-	check_warn_return(ret, "Failed to set rx csum offload: %d", ret);
-
-	smsc75xx_ethtool_set_tso(dev->net, DEFAULT_TSO_ENABLE);
+	smsc75xx_set_features(dev->net, dev->net->features);
 
 	smsc75xx_set_multicast(dev->net);
 
@@ -1037,6 +1001,7 @@ static const struct net_device_ops smsc75xx_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl 		= smsc75xx_ioctl,
 	.ndo_set_multicast_list = smsc75xx_set_multicast,
+	.ndo_set_features	= smsc75xx_set_features,
 };
 
 static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -1065,10 +1030,17 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
 
-	pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
+	if (DEFAULT_TX_CSUM_ENABLE) {
+		dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+		if (DEFAULT_TSO_ENABLE)
+			dev->net->features |= NETIF_F_SG |
+				NETIF_F_TSO | NETIF_F_TSO6;
+	}
+	if (DEFAULT_RX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_RXCSUM;
 
-	/* We have to advertise SG otherwise TSO cannot be enabled */
-	dev->net->features |= NETIF_F_SG;
+	dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXCSUM;
 
 	/* Init all registers */
 	ret = smsc75xx_reset(dev);
@@ -1091,10 +1063,11 @@ static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
 	}
 }
 
-static void smsc75xx_rx_csum_offload(struct sk_buff *skb, u32 rx_cmd_a,
-				     u32 rx_cmd_b)
+static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
+				     u32 rx_cmd_a, u32 rx_cmd_b)
 {
-	if (unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
+	if (!(dev->net->features & NETIF_F_RXCSUM) ||
+	    unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
 		skb->ip_summed = CHECKSUM_NONE;
 	} else {
 		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
@@ -1104,8 +1077,6 @@ static void smsc75xx_rx_csum_offload(struct sk_buff *skb, u32 rx_cmd_a,
 
 static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 {
-	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
-
 	while (skb->len > 0) {
 		u32 rx_cmd_a, rx_cmd_b, align_count, size;
 		struct sk_buff *ax_skb;
@@ -1145,11 +1116,8 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 			/* last frame in this batch */
 			if (skb->len == size) {
-				if (pdata->use_rx_csum)
-					smsc75xx_rx_csum_offload(skb, rx_cmd_a,
-						rx_cmd_b);
-				else
-					skb->ip_summed = CHECKSUM_NONE;
+				smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
+					rx_cmd_b);
 
 				skb_trim(skb, skb->len - 4); /* remove fcs */
 				skb->truesize = size + sizeof(struct sk_buff);
@@ -1167,11 +1135,8 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			ax_skb->data = packet;
 			skb_set_tail_pointer(ax_skb, size);
 
-			if (pdata->use_rx_csum)
-				smsc75xx_rx_csum_offload(ax_skb, rx_cmd_a,
-					rx_cmd_b);
-			else
-				ax_skb->ip_summed = CHECKSUM_NONE;
+			smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
+				rx_cmd_b);
 
 			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
 			ax_skb->truesize = size + sizeof(struct sk_buff);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 727874d9deb..f74f3ce7152 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -52,8 +52,6 @@ struct smsc95xx_priv {
 	u32 hash_hi;
 	u32 hash_lo;
 	spinlock_t mac_cr_lock;
-	bool use_tx_csum;
-	bool use_rx_csum;
 };
 
 struct usb_context {
@@ -459,7 +457,7 @@ static int smsc95xx_link_reset(struct usbnet *dev)
 {
 	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	struct mii_if_info *mii = &dev->mii;
-	struct ethtool_cmd ecmd;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 	unsigned long flags;
 	u16 lcladv, rmtadv;
 	u32 intdata;
@@ -474,8 +472,9 @@ static int smsc95xx_link_reset(struct usbnet *dev)
 	lcladv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
 	rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
 
-	netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x rmtadv: %04x\n",
-		  ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+	netif_dbg(dev, link, dev->net,
+		  "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
+		  ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
 
 	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
 	if (ecmd.duplex != DUPLEX_FULL) {
@@ -517,22 +516,24 @@ static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
 }
 
 /* Enable or disable Tx & Rx checksum offload engines */
-static int smsc95xx_set_csums(struct usbnet *dev)
+static int smsc95xx_set_features(struct net_device *netdev, u32 features)
 {
-	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+	struct usbnet *dev = netdev_priv(netdev);
 	u32 read_buf;
-	int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
+	int ret;
+
+	ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
 	if (ret < 0) {
 		netdev_warn(dev->net, "Failed to read COE_CR: %d\n", ret);
 		return ret;
 	}
 
-	if (pdata->use_tx_csum)
+	if (features & NETIF_F_HW_CSUM)
 		read_buf |= Tx_COE_EN_;
 	else
 		read_buf &= ~Tx_COE_EN_;
 
-	if (pdata->use_rx_csum)
+	if (features & NETIF_F_RXCSUM)
 		read_buf |= Rx_COE_EN_;
 	else
 		read_buf &= ~Rx_COE_EN_;
@@ -576,43 +577,6 @@ static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev,
 	return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data);
 }
 
-static u32 smsc95xx_ethtool_get_rx_csum(struct net_device *netdev)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
-	return pdata->use_rx_csum;
-}
-
-static int smsc95xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
-	pdata->use_rx_csum = !!val;
-
-	return smsc95xx_set_csums(dev);
-}
-
-static u32 smsc95xx_ethtool_get_tx_csum(struct net_device *netdev)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
-	return pdata->use_tx_csum;
-}
-
-static int smsc95xx_ethtool_set_tx_csum(struct net_device *netdev, u32 val)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
-	pdata->use_tx_csum = !!val;
-
-	ethtool_op_set_tx_hw_csum(netdev, pdata->use_tx_csum);
-	return smsc95xx_set_csums(dev);
-}
-
 static const struct ethtool_ops smsc95xx_ethtool_ops = {
 	.get_link	= usbnet_get_link,
 	.nway_reset	= usbnet_nway_reset,
@@ -624,10 +588,6 @@ static const struct ethtool_ops smsc95xx_ethtool_ops = {
 	.get_eeprom_len	= smsc95xx_ethtool_get_eeprom_len,
 	.get_eeprom	= smsc95xx_ethtool_get_eeprom,
 	.set_eeprom	= smsc95xx_ethtool_set_eeprom,
-	.get_tx_csum	= smsc95xx_ethtool_get_tx_csum,
-	.set_tx_csum	= smsc95xx_ethtool_set_tx_csum,
-	.get_rx_csum	= smsc95xx_ethtool_get_rx_csum,
-	.set_rx_csum	= smsc95xx_ethtool_set_rx_csum,
 };
 
 static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -730,7 +690,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
 		msleep(10);
 		bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
 		timeout++;
-	} while ((bmcr & MII_BMCR) && (timeout < 100));
+	} while ((bmcr & BMCR_RESET) && (timeout < 100));
 
 	if (timeout >= 100) {
 		netdev_warn(dev->net, "timeout on PHY Reset");
@@ -755,7 +715,6 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
 static int smsc95xx_reset(struct usbnet *dev)
 {
 	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-	struct net_device *netdev = dev->net;
 	u32 read_buf, write_buf, burst_cap;
 	int ret = 0, timeout;
 
@@ -975,12 +934,7 @@ static int smsc95xx_reset(struct usbnet *dev)
 	}
 
 	/* Enable or disable checksum offload engines */
-	ethtool_op_set_tx_hw_csum(netdev, pdata->use_tx_csum);
-	ret = smsc95xx_set_csums(dev);
-	if (ret < 0) {
-		netdev_warn(dev->net, "Failed to set csum offload: %d\n", ret);
-		return ret;
-	}
+	smsc95xx_set_features(dev->net, dev->net->features);
 
 	smsc95xx_set_multicast(dev->net);
 
@@ -1019,6 +973,7 @@ static const struct net_device_ops smsc95xx_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl 		= smsc95xx_ioctl,
 	.ndo_set_multicast_list = smsc95xx_set_multicast,
+	.ndo_set_features	= smsc95xx_set_features,
 };
 
 static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -1045,8 +1000,12 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	spin_lock_init(&pdata->mac_cr_lock);
 
-	pdata->use_tx_csum = DEFAULT_TX_CSUM_ENABLE;
-	pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
+	if (DEFAULT_TX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_HW_CSUM;
+	if (DEFAULT_RX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_RXCSUM;
+
+	dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
 
 	smsc95xx_init_mac_address(dev);
 
@@ -1056,7 +1015,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->netdev_ops = &smsc95xx_netdev_ops;
 	dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
 	dev->net->flags |= IFF_MULTICAST;
-	dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD;
+	dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
 	return 0;
 }
 
@@ -1080,8 +1039,6 @@ static void smsc95xx_rx_csum_offload(struct sk_buff *skb)
 
 static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 {
-	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-
 	while (skb->len > 0) {
 		u32 header, align_count;
 		struct sk_buff *ax_skb;
@@ -1123,7 +1080,7 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 			/* last frame in this batch */
 			if (skb->len == size) {
-				if (pdata->use_rx_csum)
+				if (dev->net->features & NETIF_F_RXCSUM)
 					smsc95xx_rx_csum_offload(skb);
 				skb_trim(skb, skb->len - 4); /* remove fcs */
 				skb->truesize = size + sizeof(struct sk_buff);
@@ -1141,7 +1098,7 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			ax_skb->data = packet;
 			skb_set_tail_pointer(ax_skb, size);
 
-			if (pdata->use_rx_csum)
+			if (dev->net->features & NETIF_F_RXCSUM)
 				smsc95xx_rx_csum_offload(ax_skb);
 			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
 			ax_skb->truesize = size + sizeof(struct sk_buff);
@@ -1174,8 +1131,7 @@ static u32 smsc95xx_calc_csum_preamble(struct sk_buff *skb)
 static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
 					 struct sk_buff *skb, gfp_t flags)
 {
-	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
-	bool csum = pdata->use_tx_csum && (skb->ip_summed == CHECKSUM_PARTIAL);
+	bool csum = skb->ip_summed == CHECKSUM_PARTIAL;
 	int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD;
 	u32 tx_cmd_a, tx_cmd_b;
 
@@ -1313,6 +1269,21 @@ static const struct usb_device_id products[] = {
 		USB_DEVICE(0x0424, 0x9909),
 		.driver_info = (unsigned long) &smsc95xx_info,
 	},
+	{
+		/* SMSC LAN9530 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9530),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC LAN9730 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9730),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC LAN89530 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9E08),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
 	{ },		/* END */
 };
 MODULE_DEVICE_TABLE(usb, products);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 069c1cf0fdf..e6dd2446696 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -645,6 +645,7 @@ int usbnet_stop (struct net_device *net)
 	struct driver_info	*info = dev->driver_info;
 	int			retval;
 
+	clear_bit(EVENT_DEV_OPEN, &dev->flags);
 	netif_stop_queue (net);
 
 	netif_info(dev, ifdown, dev->net,
@@ -736,6 +737,7 @@ int usbnet_open (struct net_device *net)
 		}
 	}
 
+	set_bit(EVENT_DEV_OPEN, &dev->flags);
 	netif_start_queue (net);
 	netif_info(dev, ifup, dev->net,
 		   "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
@@ -1259,6 +1261,9 @@ void usbnet_disconnect (struct usb_interface *intf)
 	if (dev->driver_info->unbind)
 		dev->driver_info->unbind (dev, intf);
 
+	usb_kill_urb(dev->interrupt);
+	usb_free_urb(dev->interrupt);
+
 	free_netdev(net);
 	usb_put_dev (xdev);
 }
@@ -1498,6 +1503,10 @@ int usbnet_resume (struct usb_interface *intf)
 	int                     retval;
 
 	if (!--dev->suspend_count) {
+		/* resume interrupt URBs */
+		if (dev->interrupt && test_bit(EVENT_DEV_OPEN, &dev->flags))
+			usb_submit_urb(dev->interrupt, GFP_NOIO);
+
 		spin_lock_irq(&dev->txq.lock);
 		while ((res = usb_get_from_anchor(&dev->deferred))) {
 
@@ -1516,9 +1525,12 @@ int usbnet_resume (struct usb_interface *intf)
 		smp_mb();
 		clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
 		spin_unlock_irq(&dev->txq.lock);
-		if (!(dev->txq.qlen >= TX_QLEN(dev)))
-			netif_start_queue(dev->net);
-		tasklet_schedule (&dev->bh);
+
+		if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
+			if (!(dev->txq.qlen >= TX_QLEN(dev)))
+				netif_start_queue(dev->net);
+			tasklet_schedule (&dev->bh);
+		}
 	}
 	return 0;
 }
@@ -1529,9 +1541,9 @@ EXPORT_SYMBOL_GPL(usbnet_resume);
 
 static int __init usbnet_init(void)
 {
-	/* compiler should optimize this out */
-	BUILD_BUG_ON (sizeof (((struct sk_buff *)0)->cb)
-			< sizeof (struct skb_data));
+	/* Compiler should optimize this out. */
+	BUILD_BUG_ON(
+		FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
 
 	random_ether_addr(node_id);
 	return 0;
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 2de9b90c5f8..8461576fa01 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -22,7 +22,6 @@
 
 #define MIN_MTU 68		/* Min L3 MTU */
 #define MAX_MTU 65535		/* Max L3 MTU (arbitrary) */
-#define MTU_PAD (ETH_HLEN + 4)  /* Max difference between L2 and L3 size MTU */
 
 struct veth_net_stats {
 	unsigned long	rx_packets;
@@ -36,7 +35,6 @@ struct veth_net_stats {
 struct veth_priv {
 	struct net_device *peer;
 	struct veth_net_stats __percpu *stats;
-	unsigned ip_summed;
 };
 
 /*
@@ -53,7 +51,7 @@ static int veth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	cmd->supported		= 0;
 	cmd->advertising	= 0;
-	cmd->speed		= SPEED_10000;
+	ethtool_cmd_speed_set(cmd, SPEED_10000);
 	cmd->duplex		= DUPLEX_FULL;
 	cmd->port		= PORT_TP;
 	cmd->phy_address	= 0;
@@ -99,47 +97,10 @@ static void veth_get_ethtool_stats(struct net_device *dev,
 	data[0] = priv->peer->ifindex;
 }
 
-static u32 veth_get_rx_csum(struct net_device *dev)
-{
-	struct veth_priv *priv;
-
-	priv = netdev_priv(dev);
-	return priv->ip_summed == CHECKSUM_UNNECESSARY;
-}
-
-static int veth_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct veth_priv *priv;
-
-	priv = netdev_priv(dev);
-	priv->ip_summed = data ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE;
-	return 0;
-}
-
-static u32 veth_get_tx_csum(struct net_device *dev)
-{
-	return (dev->features & NETIF_F_NO_CSUM) != 0;
-}
-
-static int veth_set_tx_csum(struct net_device *dev, u32 data)
-{
-	if (data)
-		dev->features |= NETIF_F_NO_CSUM;
-	else
-		dev->features &= ~NETIF_F_NO_CSUM;
-	return 0;
-}
-
 static const struct ethtool_ops veth_ethtool_ops = {
 	.get_settings		= veth_get_settings,
 	.get_drvinfo		= veth_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
-	.get_rx_csum		= veth_get_rx_csum,
-	.set_rx_csum		= veth_set_rx_csum,
-	.get_tx_csum		= veth_get_tx_csum,
-	.set_tx_csum		= veth_set_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
 	.get_strings		= veth_get_strings,
 	.get_sset_count		= veth_get_sset_count,
 	.get_ethtool_stats	= veth_get_ethtool_stats,
@@ -168,8 +129,9 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* don't change ip_summed == CHECKSUM_PARTIAL, as that
 	   will cause bad checksum on forwarded packets */
-	if (skb->ip_summed == CHECKSUM_NONE)
-		skb->ip_summed = rcv_priv->ip_summed;
+	if (skb->ip_summed == CHECKSUM_NONE &&
+	    rcv->features & NETIF_F_RXCSUM)
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	length = skb->len;
 	if (dev_forward_skb(rcv, skb) != NET_RX_SUCCESS)
@@ -304,6 +266,8 @@ static void veth_setup(struct net_device *dev)
 	dev->ethtool_ops = &veth_ethtool_ops;
 	dev->features |= NETIF_F_LLTX;
 	dev->destructor = veth_dev_free;
+
+	dev->hw_features = NETIF_F_NO_CSUM | NETIF_F_SG | NETIF_F_RXCSUM;
 }
 
 /*
@@ -403,6 +367,17 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 	if (tb[IFLA_ADDRESS] == NULL)
 		random_ether_addr(dev->dev_addr);
 
+	if (tb[IFLA_IFNAME])
+		nla_strlcpy(dev->name, tb[IFLA_IFNAME], IFNAMSIZ);
+	else
+		snprintf(dev->name, IFNAMSIZ, DRV_NAME "%%d");
+
+	if (strchr(dev->name, '%')) {
+		err = dev_alloc_name(dev, dev->name);
+		if (err < 0)
+			goto err_alloc_name;
+	}
+
 	err = register_netdevice(dev);
 	if (err < 0)
 		goto err_register_dev;
@@ -422,6 +397,7 @@ static int veth_newlink(struct net *src_net, struct net_device *dev,
 
 err_register_dev:
 	/* nothing to do */
+err_alloc_name:
 err_configure_peer:
 	unregister_netdevice(peer);
 	return err;
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 5e7f069eab5..7f23ab913fd 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -29,6 +29,8 @@
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define DRV_NAME	"via-rhine"
 #define DRV_VERSION	"1.5.0"
 #define DRV_RELDATE	"2010-10-09"
@@ -37,6 +39,7 @@
 /* A few user-configurable values.
    These may be modified when a driver module is loaded. */
 
+#define DEBUG
 static int debug = 1;	/* 1 normal messages, 0 quiet .. 7 verbose. */
 static int max_interrupt_work = 20;
 
@@ -111,8 +114,7 @@ static const int multicast_filter_limit = 32;
 
 /* These identify the driver base version and may not be removed. */
 static const char version[] __devinitconst =
-	KERN_INFO DRV_NAME ".c:v1.10-LK" DRV_VERSION " " DRV_RELDATE
-	" Written by Donald Becker\n";
+	"v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker";
 
 /* This driver was written to use PCI memory space. Some early versions
    of the Rhine may only work correctly with I/O space accesses. */
@@ -495,14 +497,15 @@ static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask);
 static void rhine_init_cam_filter(struct net_device *dev);
 static void rhine_update_vcam(struct net_device *dev);
 
-#define RHINE_WAIT_FOR(condition) do {					\
-	int i=1024;							\
-	while (!(condition) && --i)					\
-		;							\
-	if (debug > 1 && i < 512)					\
-		printk(KERN_INFO "%s: %4d cycles used @ %s:%d\n",	\
-				DRV_NAME, 1024-i, __func__, __LINE__);	\
-} while(0)
+#define RHINE_WAIT_FOR(condition)				\
+do {								\
+	int i = 1024;						\
+	while (!(condition) && --i)				\
+		;						\
+	if (debug > 1 && i < 512)				\
+		pr_info("%4d cycles used @ %s:%d\n",		\
+			1024 - i, __func__, __LINE__);		\
+} while (0)
 
 static inline u32 get_intr_status(struct net_device *dev)
 {
@@ -571,8 +574,8 @@ static void rhine_power_init(struct net_device *dev)
 			default:
 				reason = "Unknown";
 			}
-			printk(KERN_INFO "%s: Woke system up. Reason: %s.\n",
-			       DRV_NAME, reason);
+			netdev_info(dev, "Woke system up. Reason: %s\n",
+				    reason);
 		}
 	}
 }
@@ -586,8 +589,7 @@ static void rhine_chip_reset(struct net_device *dev)
 	IOSYNC;
 
 	if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
-		printk(KERN_INFO "%s: Reset not complete yet. "
-			"Trying harder.\n", DRV_NAME);
+		netdev_info(dev, "Reset not complete yet. Trying harder.\n");
 
 		/* Force reset */
 		if (rp->quirks & rqForceReset)
@@ -598,9 +600,9 @@ static void rhine_chip_reset(struct net_device *dev)
 	}
 
 	if (debug > 1)
-		printk(KERN_INFO "%s: Reset %s.\n", dev->name,
-			(ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
-			"failed" : "succeeded");
+		netdev_info(dev, "Reset %s\n",
+			    (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
+			    "failed" : "succeeded");
 }
 
 #ifdef USE_MMIO
@@ -728,9 +730,7 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 
 /* when built into the kernel, we only print version if device is found */
 #ifndef MODULE
-	static int printed_version;
-	if (!printed_version++)
-		printk(version);
+	pr_info_once("%s\n", version);
 #endif
 
 	io_size = 256;
@@ -765,8 +765,8 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	/* this should always be supported */
 	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (rc) {
-		printk(KERN_ERR "32-bit PCI DMA addresses not supported by "
-		       "the card!?\n");
+		dev_err(&pdev->dev,
+			"32-bit PCI DMA addresses not supported by the card!?\n");
 		goto err_out;
 	}
 
@@ -774,7 +774,7 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	if ((pci_resource_len(pdev, 0) < io_size) ||
 	    (pci_resource_len(pdev, 1) < io_size)) {
 		rc = -EIO;
-		printk(KERN_ERR "Insufficient PCI resources, aborting\n");
+		dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n");
 		goto err_out;
 	}
 
@@ -786,7 +786,7 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	dev = alloc_etherdev(sizeof(struct rhine_private));
 	if (!dev) {
 		rc = -ENOMEM;
-		printk(KERN_ERR "alloc_etherdev failed\n");
+		dev_err(&pdev->dev, "alloc_etherdev failed\n");
 		goto err_out;
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
@@ -804,8 +804,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	ioaddr = pci_iomap(pdev, bar, io_size);
 	if (!ioaddr) {
 		rc = -EIO;
-		printk(KERN_ERR "ioremap failed for device %s, region 0x%X "
-		       "@ 0x%lX\n", pci_name(pdev), io_size, memaddr);
+		dev_err(&pdev->dev,
+			"ioremap failed for device %s, region 0x%X @ 0x%lX\n",
+			pci_name(pdev), io_size, memaddr);
 		goto err_out_free_res;
 	}
 
@@ -820,8 +821,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 		unsigned char b = readb(ioaddr+reg);
 		if (a != b) {
 			rc = -EIO;
-			printk(KERN_ERR "MMIO do not match PIO [%02x] "
-			       "(%02x != %02x)\n", reg, a, b);
+			dev_err(&pdev->dev,
+				"MMIO do not match PIO [%02x] (%02x != %02x)\n",
+				reg, a, b);
 			goto err_out_unmap;
 		}
 	}
@@ -836,13 +838,15 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
-	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
-	if (!is_valid_ether_addr(dev->perm_addr)) {
-		rc = -EIO;
-		printk(KERN_ERR "Invalid MAC address\n");
-		goto err_out_unmap;
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		/* Report it and use a random ethernet address instead */
+		netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
+		random_ether_addr(dev->dev_addr);
+		netdev_info(dev, "Using random MAC address: %pM\n",
+			    dev->dev_addr);
 	}
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
 	/* For Rhine-I/II, phy_id is loaded from EEPROM */
 	if (!phy_id)
@@ -878,14 +882,14 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	if (rc)
 		goto err_out_unmap;
 
-	printk(KERN_INFO "%s: VIA %s at 0x%lx, %pM, IRQ %d.\n",
-	       dev->name, name,
+	netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n",
+		    name,
 #ifdef USE_MMIO
-	       memaddr,
+		    memaddr,
 #else
-	       (long)ioaddr,
+		    (long)ioaddr,
 #endif
-	       dev->dev_addr, pdev->irq);
+		    dev->dev_addr, pdev->irq);
 
 	pci_set_drvdata(pdev, dev);
 
@@ -896,11 +900,11 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 		mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
 		if (mii_status != 0xffff && mii_status != 0x0000) {
 			rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
-			printk(KERN_INFO "%s: MII PHY found at address "
-			       "%d, status 0x%4.4x advertising %4.4x "
-			       "Link %4.4x.\n", dev->name, phy_id,
-			       mii_status, rp->mii_if.advertising,
-			       mdio_read(dev, phy_id, 5));
+			netdev_info(dev,
+				    "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n",
+				    phy_id,
+				    mii_status, rp->mii_if.advertising,
+				    mdio_read(dev, phy_id, 5));
 
 			/* set IFF_RUNNING */
 			if (mii_status & BMSR_LSTATUS)
@@ -912,8 +916,7 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	}
 	rp->mii_if.phy_id = phy_id;
 	if (debug > 1 && avoid_D3)
-		printk(KERN_INFO "%s: No D3 power state at shutdown.\n",
-		       dev->name);
+		netdev_info(dev, "No D3 power state at shutdown\n");
 
 	return 0;
 
@@ -938,7 +941,7 @@ static int alloc_ring(struct net_device* dev)
 				    TX_RING_SIZE * sizeof(struct tx_desc),
 				    &ring_dma);
 	if (!ring) {
-		printk(KERN_ERR "Could not allocate DMA memory.\n");
+		netdev_err(dev, "Could not allocate DMA memory\n");
 		return -ENOMEM;
 	}
 	if (rp->quirks & rqRhineI) {
@@ -1098,8 +1101,8 @@ static void rhine_check_media(struct net_device *dev, unsigned int init_media)
 	    iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
 		   ioaddr + ChipCmd1);
 	if (debug > 1)
-		printk(KERN_INFO "%s: force_media %d, carrier %d\n", dev->name,
-			rp->mii_if.force_media, netif_carrier_ok(dev));
+		netdev_info(dev, "force_media %d, carrier %d\n",
+			    rp->mii_if.force_media, netif_carrier_ok(dev));
 }
 
 /* Called after status of force_media possibly changed */
@@ -1113,9 +1116,8 @@ static void rhine_set_carrier(struct mii_if_info *mii)
 	else	/* Let MMI library update carrier status */
 		rhine_check_media(mii->dev, 0);
 	if (debug > 1)
-		printk(KERN_INFO "%s: force_media %d, carrier %d\n",
-		       mii->dev->name, mii->force_media,
-		       netif_carrier_ok(mii->dev));
+		netdev_info(mii->dev, "force_media %d, carrier %d\n",
+			    mii->force_media, netif_carrier_ok(mii->dev));
 }
 
 /**
@@ -1402,8 +1404,7 @@ static int rhine_open(struct net_device *dev)
 		return rc;
 
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: rhine_open() irq %d.\n",
-		       dev->name, rp->pdev->irq);
+		netdev_dbg(dev, "%s() irq %d\n", __func__, rp->pdev->irq);
 
 	rc = alloc_ring(dev);
 	if (rc) {
@@ -1415,10 +1416,9 @@ static int rhine_open(struct net_device *dev)
 	rhine_chip_reset(dev);
 	init_registers(dev);
 	if (debug > 2)
-		printk(KERN_DEBUG "%s: Done rhine_open(), status %4.4x "
-		       "MII status: %4.4x.\n",
-		       dev->name, ioread16(ioaddr + ChipCmd),
-		       mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+		netdev_dbg(dev, "%s() Done - status %04x MII status: %04x\n",
+			   __func__, ioread16(ioaddr + ChipCmd),
+			   mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
 
 	netif_start_queue(dev);
 
@@ -1461,10 +1461,9 @@ static void rhine_tx_timeout(struct net_device *dev)
 	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
 
-	printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
-	       "%4.4x, resetting...\n",
-	       dev->name, ioread16(ioaddr + IntrStatus),
-	       mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+	netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n",
+		    ioread16(ioaddr + IntrStatus),
+		    mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
 
 	schedule_work(&rp->reset_task);
 }
@@ -1551,8 +1550,8 @@ static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
 	spin_unlock_irqrestore(&rp->lock, flags);
 
 	if (debug > 4) {
-		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
-		       dev->name, rp->cur_tx-1, entry);
+		netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
+			   rp->cur_tx-1, entry);
 	}
 	return NETDEV_TX_OK;
 }
@@ -1578,8 +1577,8 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
 		IOSYNC;
 
 		if (debug > 4)
-			printk(KERN_DEBUG "%s: Interrupt, status %8.8x.\n",
-			       dev->name, intr_status);
+			netdev_dbg(dev, "Interrupt, status %08x\n",
+				   intr_status);
 
 		if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
 				   IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
@@ -1597,9 +1596,9 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
 				RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
 				if (debug > 2 &&
 				    ioread8(ioaddr+ChipCmd) & CmdTxOn)
-					printk(KERN_WARNING "%s: "
-					       "rhine_interrupt() Tx engine "
-					       "still on.\n", dev->name);
+					netdev_warn(dev,
+						    "%s: Tx engine still on\n",
+						    __func__);
 			}
 			rhine_tx(dev);
 		}
@@ -1611,16 +1610,15 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
 			rhine_error(dev, intr_status);
 
 		if (--boguscnt < 0) {
-			printk(KERN_WARNING "%s: Too much work at interrupt, "
-			       "status=%#8.8x.\n",
-			       dev->name, intr_status);
+			netdev_warn(dev, "Too much work at interrupt, status=%#08x\n",
+				    intr_status);
 			break;
 		}
 	}
 
 	if (debug > 3)
-		printk(KERN_DEBUG "%s: exiting interrupt, status=%8.8x.\n",
-		       dev->name, ioread16(ioaddr + IntrStatus));
+		netdev_dbg(dev, "exiting interrupt, status=%08x\n",
+			   ioread16(ioaddr + IntrStatus));
 	return IRQ_RETVAL(handled);
 }
 
@@ -1637,15 +1635,14 @@ static void rhine_tx(struct net_device *dev)
 	while (rp->dirty_tx != rp->cur_tx) {
 		txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
 		if (debug > 6)
-			printk(KERN_DEBUG "Tx scavenge %d status %8.8x.\n",
-			       entry, txstatus);
+			netdev_dbg(dev, "Tx scavenge %d status %08x\n",
+				   entry, txstatus);
 		if (txstatus & DescOwn)
 			break;
 		if (txstatus & 0x8000) {
 			if (debug > 1)
-				printk(KERN_DEBUG "%s: Transmit error, "
-				       "Tx status %8.8x.\n",
-				       dev->name, txstatus);
+				netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+					   txstatus);
 			dev->stats.tx_errors++;
 			if (txstatus & 0x0400)
 				dev->stats.tx_carrier_errors++;
@@ -1668,9 +1665,9 @@ static void rhine_tx(struct net_device *dev)
 			else
 				dev->stats.collisions += txstatus & 0x0F;
 			if (debug > 6)
-				printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n",
-				       (txstatus >> 3) & 0xF,
-				       txstatus & 0xF);
+				netdev_dbg(dev, "collisions: %1.1x:%1.1x\n",
+					   (txstatus >> 3) & 0xF,
+					   txstatus & 0xF);
 			dev->stats.tx_bytes += rp->tx_skbuff[entry]->len;
 			dev->stats.tx_packets++;
 		}
@@ -1703,7 +1700,7 @@ static void rhine_tx(struct net_device *dev)
 static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size)
 {
 	u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2;
-	return ntohs(*(u16 *)trailer);
+	return be16_to_cpup((__be16 *)trailer);
 }
 
 /* Process up to limit frames from receive ring */
@@ -1714,9 +1711,9 @@ static int rhine_rx(struct net_device *dev, int limit)
 	int entry = rp->cur_rx % RX_RING_SIZE;
 
 	if (debug > 4) {
-		printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n",
-		       dev->name, entry,
-		       le32_to_cpu(rp->rx_head_desc->rx_status));
+		netdev_dbg(dev, "%s(), entry %d status %08x\n",
+			   __func__, entry,
+			   le32_to_cpu(rp->rx_head_desc->rx_status));
 	}
 
 	/* If EOP is set on the next entry, it's a new packet. Send it up. */
@@ -1730,26 +1727,26 @@ static int rhine_rx(struct net_device *dev, int limit)
 			break;
 
 		if (debug > 4)
-			printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n",
-			       desc_status);
+			netdev_dbg(dev, "%s() status is %08x\n",
+				   __func__, desc_status);
 
 		if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
 			if ((desc_status & RxWholePkt) != RxWholePkt) {
-				printk(KERN_WARNING "%s: Oversized Ethernet "
-				       "frame spanned multiple buffers, entry "
-				       "%#x length %d status %8.8x!\n",
-				       dev->name, entry, data_size,
-				       desc_status);
-				printk(KERN_WARNING "%s: Oversized Ethernet "
-				       "frame %p vs %p.\n", dev->name,
-				       rp->rx_head_desc, &rp->rx_ring[entry]);
+				netdev_warn(dev,
+	"Oversized Ethernet frame spanned multiple buffers, "
+	"entry %#x length %d status %08x!\n",
+					    entry, data_size,
+					    desc_status);
+				netdev_warn(dev,
+					    "Oversized Ethernet frame %p vs %p\n",
+					    rp->rx_head_desc,
+					    &rp->rx_ring[entry]);
 				dev->stats.rx_length_errors++;
 			} else if (desc_status & RxErr) {
 				/* There was a error. */
 				if (debug > 2)
-					printk(KERN_DEBUG "rhine_rx() Rx "
-					       "error was %8.8x.\n",
-					       desc_status);
+					netdev_dbg(dev, "%s() Rx error was %08x\n",
+						   __func__, desc_status);
 				dev->stats.rx_errors++;
 				if (desc_status & 0x0030)
 					dev->stats.rx_length_errors++;
@@ -1791,9 +1788,7 @@ static int rhine_rx(struct net_device *dev, int limit)
 			} else {
 				skb = rp->rx_skbuff[entry];
 				if (skb == NULL) {
-					printk(KERN_ERR "%s: Inconsistent Rx "
-					       "descriptor chain.\n",
-					       dev->name);
+					netdev_err(dev, "Inconsistent Rx descriptor chain\n");
 					break;
 				}
 				rp->rx_skbuff[entry] = NULL;
@@ -1861,7 +1856,7 @@ static void rhine_restart_tx(struct net_device *dev) {
 	u32 intr_status;
 
 	/*
-	 * If new errors occured, we need to sort them out before doing Tx.
+	 * If new errors occurred, we need to sort them out before doing Tx.
 	 * In that case the ISR will be back here RSN anyway.
 	 */
 	intr_status = get_intr_status(dev);
@@ -1886,9 +1881,8 @@ static void rhine_restart_tx(struct net_device *dev) {
 	else {
 		/* This should never happen */
 		if (debug > 1)
-			printk(KERN_WARNING "%s: rhine_restart_tx() "
-			       "Another error occured %8.8x.\n",
-			       dev->name, intr_status);
+			netdev_warn(dev, "%s() Another error occurred %08x\n",
+				   __func__, intr_status);
 	}
 
 }
@@ -1909,21 +1903,19 @@ static void rhine_error(struct net_device *dev, int intr_status)
 	}
 	if (intr_status & IntrTxAborted) {
 		if (debug > 1)
-			printk(KERN_INFO "%s: Abort %8.8x, frame dropped.\n",
-			       dev->name, intr_status);
+			netdev_info(dev, "Abort %08x, frame dropped\n",
+				    intr_status);
 	}
 	if (intr_status & IntrTxUnderrun) {
 		if (rp->tx_thresh < 0xE0)
 			BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
 		if (debug > 1)
-			printk(KERN_INFO "%s: Transmitter underrun, Tx "
-			       "threshold now %2.2x.\n",
-			       dev->name, rp->tx_thresh);
+			netdev_info(dev, "Transmitter underrun, Tx threshold now %02x\n",
+				    rp->tx_thresh);
 	}
 	if (intr_status & IntrTxDescRace) {
 		if (debug > 2)
-			printk(KERN_INFO "%s: Tx descriptor write-back race.\n",
-			       dev->name);
+			netdev_info(dev, "Tx descriptor write-back race\n");
 	}
 	if ((intr_status & IntrTxError) &&
 	    (intr_status & (IntrTxAborted |
@@ -1932,9 +1924,8 @@ static void rhine_error(struct net_device *dev, int intr_status)
 			BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
 		}
 		if (debug > 1)
-			printk(KERN_INFO "%s: Unspecified error. Tx "
-			       "threshold now %2.2x.\n",
-			       dev->name, rp->tx_thresh);
+			netdev_info(dev, "Unspecified error. Tx threshold now %02x\n",
+				    rp->tx_thresh);
 	}
 	if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
 			   IntrTxError))
@@ -1944,8 +1935,8 @@ static void rhine_error(struct net_device *dev, int intr_status)
 			    IntrTxError | IntrTxAborted | IntrNormalSummary |
 			    IntrTxDescRace)) {
 		if (debug > 1)
-			printk(KERN_ERR "%s: Something Wicked happened! "
-			       "%8.8x.\n", dev->name, intr_status);
+			netdev_err(dev, "Something Wicked happened! %08x\n",
+				   intr_status);
 	}
 
 	spin_unlock(&rp->lock);
@@ -2145,9 +2136,8 @@ static int rhine_close(struct net_device *dev)
 	spin_lock_irq(&rp->lock);
 
 	if (debug > 1)
-		printk(KERN_DEBUG "%s: Shutting down ethercard, "
-		       "status was %4.4x.\n",
-		       dev->name, ioread16(ioaddr + ChipCmd));
+		netdev_dbg(dev, "Shutting down ethercard, status was %04x\n",
+			   ioread16(ioaddr + ChipCmd));
 
 	/* Switch to loopback mode to avoid hardware races. */
 	iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
@@ -2265,12 +2255,12 @@ static int rhine_resume(struct pci_dev *pdev)
 		return 0;
 
 	if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
-		printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
+		netdev_err(dev, "request_irq failed\n");
 
 	ret = pci_set_power_state(pdev, PCI_D0);
 	if (debug > 1)
-		printk(KERN_INFO "%s: Entering power state D0 %s (%d).\n",
-			dev->name, ret ? "failed" : "succeeded", ret);
+		netdev_info(dev, "Entering power state D0 %s (%d)\n",
+			    ret ? "failed" : "succeeded", ret);
 
 	pci_restore_state(pdev);
 
@@ -2326,17 +2316,15 @@ static int __init rhine_init(void)
 {
 /* when a module, this is printed whether or not devices are found in probe */
 #ifdef MODULE
-	printk(version);
+	pr_info("%s\n", version);
 #endif
 	if (dmi_check_system(rhine_dmi_table)) {
 		/* these BIOSes fail at PXE boot if chip is in D3 */
 		avoid_D3 = 1;
-		printk(KERN_WARNING "%s: Broken BIOS detected, avoid_D3 "
-				    "enabled.\n",
-		       DRV_NAME);
+		pr_warn("Broken BIOS detected, avoid_D3 enabled\n");
 	}
 	else if (avoid_D3)
-		printk(KERN_INFO "%s: avoid_D3 set.\n", DRV_NAME);
+		pr_info("avoid_D3 set\n");
 
 	return pci_register_driver(&rhine_driver);
 }
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 0d6fec6b7d9..06daa9d6fee 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -292,7 +292,7 @@ VELOCITY_PARAM(DMA_length, "DMA length");
 /* IP_byte_align[] is used for IP header DWORD byte aligned
    0: indicate the IP header won't be DWORD byte aligned.(Default) .
    1: indicate the IP header will be DWORD byte aligned.
-      In some enviroment, the IP header should be DWORD byte aligned,
+      In some environment, the IP header should be DWORD byte aligned,
       or the packet will be droped when we receive it. (eg: IPVS)
 */
 VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
@@ -1994,7 +1994,7 @@ static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
  *	@dev: network device
  *
  *	Replace the current skb that is scheduled for Rx processing by a
- *	shorter, immediatly allocated skb, if the received packet is small
+ *	shorter, immediately allocated skb, if the received packet is small
  *	enough. This function returns a negative value if the received
  *	packet is too big or if memory is exhausted.
  */
@@ -2600,8 +2600,7 @@ static netdev_tx_t velocity_xmit(struct sk_buff *skb,
 	/*
 	 *	Handle hardware checksum
 	 */
-	if ((dev->features & NETIF_F_IP_CSUM) &&
-	    (skb->ip_summed == CHECKSUM_PARTIAL)) {
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		const struct iphdr *ip = ip_hdr(skb);
 		if (ip->protocol == IPPROTO_TCP)
 			td_ptr->tdesc1.TCR |= TCR0_TCPCK;
@@ -2841,6 +2840,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
 	dev->ethtool_ops = &velocity_ethtool_ops;
 	netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT);
 
+	dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HW_VLAN_TX;
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
 		NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM;
 
@@ -3182,7 +3182,8 @@ static void velocity_ethtool_down(struct net_device *dev)
 		pci_set_power_state(vptr->pdev, PCI_D3hot);
 }
 
-static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int velocity_get_settings(struct net_device *dev,
+				 struct ethtool_cmd *cmd)
 {
 	struct velocity_info *vptr = netdev_priv(dev);
 	struct mac_regs __iomem *regs = vptr->mac_regs;
@@ -3228,12 +3229,14 @@ static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd
 			break;
 		}
 	}
+
 	if (status & VELOCITY_SPEED_1000)
-		cmd->speed = SPEED_1000;
+		ethtool_cmd_speed_set(cmd, SPEED_1000);
 	else if (status & VELOCITY_SPEED_100)
-		cmd->speed = SPEED_100;
+		ethtool_cmd_speed_set(cmd, SPEED_100);
 	else
-		cmd->speed = SPEED_10;
+		ethtool_cmd_speed_set(cmd, SPEED_10);
+
 	cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
 	cmd->port = PORT_TP;
 	cmd->transceiver = XCVR_INTERNAL;
@@ -3247,9 +3250,11 @@ static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd
 	return 0;
 }
 
-static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int velocity_set_settings(struct net_device *dev,
+				 struct ethtool_cmd *cmd)
 {
 	struct velocity_info *vptr = netdev_priv(dev);
+	u32 speed = ethtool_cmd_speed(cmd);
 	u32 curr_status;
 	u32 new_status = 0;
 	int ret = 0;
@@ -3258,9 +3263,9 @@ static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd
 	curr_status &= (~VELOCITY_LINK_FAIL);
 
 	new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
-	new_status |= ((cmd->speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
-	new_status |= ((cmd->speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
-	new_status |= ((cmd->speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
+	new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
+	new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
+	new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
 	new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0);
 
 	if ((new_status & VELOCITY_AUTONEG_ENABLE) &&
@@ -3457,13 +3462,10 @@ static const struct ethtool_ops velocity_ethtool_ops = {
 	.get_settings	=	velocity_get_settings,
 	.set_settings	=	velocity_set_settings,
 	.get_drvinfo	=	velocity_get_drvinfo,
-	.set_tx_csum	=	ethtool_op_set_tx_csum,
-	.get_tx_csum	=	ethtool_op_get_tx_csum,
 	.get_wol	=	velocity_ethtool_get_wol,
 	.set_wol	=	velocity_ethtool_set_wol,
 	.get_msglevel	=	velocity_get_msglevel,
 	.set_msglevel	=	velocity_set_msglevel,
-	.set_sg 	=	ethtool_op_set_sg,
 	.get_link	=	velocity_get_link,
 	.get_coalesce	=	velocity_get_coalesce,
 	.set_coalesce	=	velocity_set_coalesce,
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 82dba5aaf42..0cb0b063267 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -710,17 +710,6 @@ static int virtnet_close(struct net_device *dev)
 	return 0;
 }
 
-static int virtnet_set_tx_csum(struct net_device *dev, u32 data)
-{
-	struct virtnet_info *vi = netdev_priv(dev);
-	struct virtio_device *vdev = vi->vdev;
-
-	if (data && !virtio_has_feature(vdev, VIRTIO_NET_F_CSUM))
-		return -ENOSYS;
-
-	return ethtool_op_set_tx_hw_csum(dev, data);
-}
-
 static void virtnet_set_rx_mode(struct net_device *dev)
 {
 	struct virtnet_info *vi = netdev_priv(dev);
@@ -822,10 +811,6 @@ static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
 }
 
 static const struct ethtool_ops virtnet_ethtool_ops = {
-	.set_tx_csum = virtnet_set_tx_csum,
-	.set_sg = ethtool_op_set_sg,
-	.set_tso = ethtool_op_set_tso,
-	.set_ufo = ethtool_op_set_ufo,
 	.get_link = ethtool_op_get_link,
 };
 
@@ -912,22 +897,29 @@ static int virtnet_probe(struct virtio_device *vdev)
 	SET_NETDEV_DEV(dev, &vdev->dev);
 
 	/* Do we support "hardware" checksums? */
-	if (csum && virtio_has_feature(vdev, VIRTIO_NET_F_CSUM)) {
+	if (virtio_has_feature(vdev, VIRTIO_NET_F_CSUM)) {
 		/* This opens up the world of extra features. */
-		dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
-		if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
-			dev->features |= NETIF_F_TSO | NETIF_F_UFO
+		dev->hw_features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
+		if (csum)
+			dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
+
+		if (virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
+			dev->hw_features |= NETIF_F_TSO | NETIF_F_UFO
 				| NETIF_F_TSO_ECN | NETIF_F_TSO6;
 		}
 		/* Individual feature bits: what can host handle? */
-		if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO4))
-			dev->features |= NETIF_F_TSO;
-		if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO6))
-			dev->features |= NETIF_F_TSO6;
-		if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
-			dev->features |= NETIF_F_TSO_ECN;
-		if (gso && virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
-			dev->features |= NETIF_F_UFO;
+		if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO4))
+			dev->hw_features |= NETIF_F_TSO;
+		if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_TSO6))
+			dev->hw_features |= NETIF_F_TSO6;
+		if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
+			dev->hw_features |= NETIF_F_TSO_ECN;
+		if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
+			dev->hw_features |= NETIF_F_UFO;
+
+		if (gso)
+			dev->features |= dev->hw_features & (NETIF_F_ALL_TSO|NETIF_F_UFO);
+		/* (!csum && gso) case will be fixed by register_netdev() */
 	}
 
 	/* Configuration may specify what MAC to use.  Otherwise random. */
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index cc14b4a7504..fa6e2ac7475 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -178,6 +178,7 @@ static void
 vmxnet3_process_events(struct vmxnet3_adapter *adapter)
 {
 	int i;
+	unsigned long flags;
 	u32 events = le32_to_cpu(adapter->shared->ecr);
 	if (!events)
 		return;
@@ -190,10 +191,10 @@ vmxnet3_process_events(struct vmxnet3_adapter *adapter)
 
 	/* Check if there is an error on xmit/recv queues */
 	if (events & (VMXNET3_ECR_TQERR | VMXNET3_ECR_RQERR)) {
-		spin_lock(&adapter->cmd_lock);
+		spin_lock_irqsave(&adapter->cmd_lock, flags);
 		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 				       VMXNET3_CMD_GET_QUEUE_STATUS);
-		spin_unlock(&adapter->cmd_lock);
+		spin_unlock_irqrestore(&adapter->cmd_lock, flags);
 
 		for (i = 0; i < adapter->num_tx_queues; i++)
 			if (adapter->tqd_start[i].status.stopped)
@@ -892,7 +893,7 @@ vmxnet3_prepare_tso(struct sk_buff *skb,
  * Transmits a pkt thru a given tq
  * Returns:
  *    NETDEV_TX_OK:      descriptors are setup successfully
- *    NETDEV_TX_OK:      error occured, the pkt is dropped
+ *    NETDEV_TX_OK:      error occurred, the pkt is dropped
  *    NETDEV_TX_BUSY:    tx ring is full, queue is stopped
  *
  * Side-effects:
@@ -1082,7 +1083,7 @@ vmxnet3_rx_csum(struct vmxnet3_adapter *adapter,
 		struct sk_buff *skb,
 		union Vmxnet3_GenericDesc *gdesc)
 {
-	if (!gdesc->rcd.cnc && adapter->rxcsum) {
+	if (!gdesc->rcd.cnc && adapter->netdev->features & NETIF_F_RXCSUM) {
 		/* typical case: TCP/UDP over IP and both csums are correct */
 		if ((le32_to_cpu(gdesc->dword[3]) & VMXNET3_RCD_CSUM_OK) ==
 							VMXNET3_RCD_CSUM_OK) {
@@ -2081,10 +2082,10 @@ vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter)
 	devRead->misc.ddLen = cpu_to_le32(sizeof(struct vmxnet3_adapter));
 
 	/* set up feature flags */
-	if (adapter->rxcsum)
+	if (adapter->netdev->features & NETIF_F_RXCSUM)
 		devRead->misc.uptFeatures |= UPT1_F_RXCSUM;
 
-	if (adapter->lro) {
+	if (adapter->netdev->features & NETIF_F_LRO) {
 		devRead->misc.uptFeatures |= UPT1_F_LRO;
 		devRead->misc.maxNumRxSG = cpu_to_le16(1 + MAX_SKB_FRAGS);
 	}
@@ -2593,9 +2594,6 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
 	if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU)
 		return -EINVAL;
 
-	if (new_mtu > 1500 && !adapter->jumbo_frame)
-		return -EINVAL;
-
 	netdev->mtu = new_mtu;
 
 	/*
@@ -2641,28 +2639,18 @@ vmxnet3_declare_features(struct vmxnet3_adapter *adapter, bool dma64)
 {
 	struct net_device *netdev = adapter->netdev;
 
-	netdev->features = NETIF_F_SG |
-		NETIF_F_HW_CSUM |
-		NETIF_F_HW_VLAN_TX |
-		NETIF_F_HW_VLAN_RX |
-		NETIF_F_HW_VLAN_FILTER |
-		NETIF_F_TSO |
-		NETIF_F_TSO6 |
-		NETIF_F_LRO;
-
-	printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro");
-
-	adapter->rxcsum = true;
-	adapter->jumbo_frame = true;
-	adapter->lro = true;
-
-	if (dma64) {
+	netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
+		NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_TX |
+		NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_LRO;
+	if (dma64)
 		netdev->features |= NETIF_F_HIGHDMA;
-		printk(" highDMA");
-	}
+	netdev->vlan_features = netdev->hw_features & ~NETIF_F_HW_VLAN_TX;
+	netdev->features = netdev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
 
-	netdev->vlan_features = netdev->features;
-	printk("\n");
+	netdev_info(adapter->netdev,
+		"features: sg csum vlan jf tso tsoIPv6 lro%s\n",
+		dma64 ? " highDMA" : "");
 }
 
 
@@ -2685,7 +2673,7 @@ vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
  * Enable MSIx vectors.
  * Returns :
  *	0 on successful enabling of required vectors,
- *	VMXNET3_LINUX_MIN_MSIX_VECT when only minumum number of vectors required
+ *	VMXNET3_LINUX_MIN_MSIX_VECT when only minimum number of vectors required
  *	 could be enabled.
  *	number of vectors which can be enabled otherwise (this number is smaller
  *	 than VMXNET3_LINUX_MIN_MSIX_VECT)
@@ -2733,13 +2721,14 @@ static void
 vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
 {
 	u32 cfg;
+	unsigned long flags;
 
 	/* intr settings */
-	spin_lock(&adapter->cmd_lock);
+	spin_lock_irqsave(&adapter->cmd_lock, flags);
 	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 			       VMXNET3_CMD_GET_CONF_INTR);
 	cfg = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
-	spin_unlock(&adapter->cmd_lock);
+	spin_unlock_irqrestore(&adapter->cmd_lock, flags);
 	adapter->intr.type = cfg & 0x3;
 	adapter->intr.mask_mode = (cfg >> 2) & 0x3;
 
@@ -2874,6 +2863,7 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 		.ndo_start_xmit = vmxnet3_xmit_frame,
 		.ndo_set_mac_address = vmxnet3_set_mac_addr,
 		.ndo_change_mtu = vmxnet3_change_mtu,
+		.ndo_set_features = vmxnet3_set_features,
 		.ndo_get_stats = vmxnet3_get_stats,
 		.ndo_tx_timeout = vmxnet3_tx_timeout,
 		.ndo_set_multicast_list = vmxnet3_set_mc,
@@ -2894,6 +2884,9 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 	int num_tx_queues;
 	int num_rx_queues;
 
+	if (!pci_msi_enabled())
+		enable_mq = 0;
+
 #ifdef VMXNET3_RSS
 	if (enable_mq)
 		num_rx_queues = min(VMXNET3_DEVICE_MAX_RX_QUEUES,
diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
index 51f2ef142a5..dc959fe27aa 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -33,40 +33,6 @@ struct vmxnet3_stat_desc {
 };
 
 
-static u32
-vmxnet3_get_rx_csum(struct net_device *netdev)
-{
-	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
-	return adapter->rxcsum;
-}
-
-
-static int
-vmxnet3_set_rx_csum(struct net_device *netdev, u32 val)
-{
-	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
-	unsigned long flags;
-
-	if (adapter->rxcsum != val) {
-		adapter->rxcsum = val;
-		if (netif_running(netdev)) {
-			if (val)
-				adapter->shared->devRead.misc.uptFeatures |=
-				UPT1_F_RXCSUM;
-			else
-				adapter->shared->devRead.misc.uptFeatures &=
-				~UPT1_F_RXCSUM;
-
-			spin_lock_irqsave(&adapter->cmd_lock, flags);
-			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
-					       VMXNET3_CMD_UPDATE_FEATURE);
-			spin_unlock_irqrestore(&adapter->cmd_lock, flags);
-		}
-	}
-	return 0;
-}
-
-
 /* per tq stats maintained by the device */
 static const struct vmxnet3_stat_desc
 vmxnet3_tq_dev_stats[] = {
@@ -296,28 +262,28 @@ vmxnet3_get_strings(struct net_device *netdev, u32 stringset, u8 *buf)
 	}
 }
 
-static int
-vmxnet3_set_flags(struct net_device *netdev, u32 data)
+int vmxnet3_set_features(struct net_device *netdev, u32 features)
 {
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
-	u8 lro_requested = (data & ETH_FLAG_LRO) == 0 ? 0 : 1;
-	u8 lro_present = (netdev->features & NETIF_F_LRO) == 0 ? 0 : 1;
 	unsigned long flags;
+	u32 changed = features ^ netdev->features;
 
-	if (ethtool_invalid_flags(netdev, data, ETH_FLAG_LRO))
-		return -EINVAL;
-
-	if (lro_requested ^ lro_present) {
-		/* toggle the LRO feature*/
-		netdev->features ^= NETIF_F_LRO;
+	if (changed & (NETIF_F_RXCSUM|NETIF_F_LRO)) {
+		if (features & NETIF_F_RXCSUM)
+			adapter->shared->devRead.misc.uptFeatures |=
+			UPT1_F_RXCSUM;
+		else
+			adapter->shared->devRead.misc.uptFeatures &=
+			~UPT1_F_RXCSUM;
 
 		/* update harware LRO capability accordingly */
-		if (lro_requested)
+		if (features & NETIF_F_LRO)
 			adapter->shared->devRead.misc.uptFeatures |=
 							UPT1_F_LRO;
 		else
 			adapter->shared->devRead.misc.uptFeatures &=
 							~UPT1_F_LRO;
+
 		spin_lock_irqsave(&adapter->cmd_lock, flags);
 		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 				       VMXNET3_CMD_UPDATE_FEATURE);
@@ -459,10 +425,10 @@ vmxnet3_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 	ecmd->transceiver = XCVR_INTERNAL;
 
 	if (adapter->link_speed) {
-		ecmd->speed = adapter->link_speed;
+		ethtool_cmd_speed_set(ecmd, adapter->link_speed);
 		ecmd->duplex = DUPLEX_FULL;
 	} else {
-		ecmd->speed = -1;
+		ethtool_cmd_speed_set(ecmd, -1);
 		ecmd->duplex = -1;
 	}
 	return 0;
@@ -654,17 +620,7 @@ static struct ethtool_ops vmxnet3_ethtool_ops = {
 	.get_wol           = vmxnet3_get_wol,
 	.set_wol           = vmxnet3_set_wol,
 	.get_link          = ethtool_op_get_link,
-	.get_rx_csum       = vmxnet3_get_rx_csum,
-	.set_rx_csum       = vmxnet3_set_rx_csum,
-	.get_tx_csum       = ethtool_op_get_tx_csum,
-	.set_tx_csum       = ethtool_op_set_tx_hw_csum,
-	.get_sg            = ethtool_op_get_sg,
-	.set_sg            = ethtool_op_set_sg,
-	.get_tso           = ethtool_op_get_tso,
-	.set_tso           = ethtool_op_set_tso,
 	.get_strings       = vmxnet3_get_strings,
-	.get_flags	   = ethtool_op_get_flags,
-	.set_flags	   = vmxnet3_set_flags,
 	.get_sset_count	   = vmxnet3_get_sset_count,
 	.get_ethtool_stats = vmxnet3_get_ethtool_stats,
 	.get_ringparam     = vmxnet3_get_ringparam,
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index fb5d245ac87..f50d36fdf40 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -68,10 +68,10 @@
 /*
  * Version numbers
  */
-#define VMXNET3_DRIVER_VERSION_STRING   "1.0.25.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING   "1.1.9.0-k"
 
 /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM      0x01001900
+#define VMXNET3_DRIVER_VERSION_NUM      0x01010900
 
 #if defined(CONFIG_PCI_MSI)
 	/* RSS only makes sense if MSI-X is supported. */
@@ -329,10 +329,6 @@ struct vmxnet3_adapter {
 	u8			__iomem *hw_addr0; /* for BAR 0 */
 	u8			__iomem *hw_addr1; /* for BAR 1 */
 
-	/* feature control */
-	bool				rxcsum;
-	bool				lro;
-	bool				jumbo_frame;
 #ifdef VMXNET3_RSS
 	struct UPT1_RSSConf		*rss_conf;
 	bool				rss;
@@ -404,6 +400,9 @@ void
 vmxnet3_rq_destroy_all(struct vmxnet3_adapter *adapter);
 
 int
+vmxnet3_set_features(struct net_device *netdev, u32 features);
+
+int
 vmxnet3_create_queues(struct vmxnet3_adapter *adapter,
 		      u32 tx_ring_size, u32 rx_ring_size, u32 rx_ring2_size);
 
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index e74e4b42592..32763b2dd73 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -159,16 +159,15 @@ vxge_hw_vpath_fw_api(struct __vxge_hw_virtualpath *vpath, u32 action,
 		     u32 fw_memo, u32 offset, u64 *data0, u64 *data1,
 		     u64 *steer_ctrl)
 {
-	struct vxge_hw_vpath_reg __iomem *vp_reg;
+	struct vxge_hw_vpath_reg __iomem *vp_reg = vpath->vp_reg;
 	enum vxge_hw_status status;
 	u64 val64;
-	u32 retry = 0, max_retry = 100;
-
-	vp_reg = vpath->vp_reg;
+	u32 retry = 0, max_retry = 3;
 
-	if (vpath->vp_open) {
-		max_retry = 3;
-		spin_lock(&vpath->lock);
+	spin_lock(&vpath->lock);
+	if (!vpath->vp_open) {
+		spin_unlock(&vpath->lock);
+		max_retry = 100;
 	}
 
 	writeq(*data0, &vp_reg->rts_access_steer_data0);
@@ -187,7 +186,7 @@ vxge_hw_vpath_fw_api(struct __vxge_hw_virtualpath *vpath, u32 action,
 					   VXGE_HW_DEF_DEVICE_POLL_MILLIS);
 
 	/* The __vxge_hw_device_register_poll can udelay for a significant
-	 * amount of time, blocking other proccess from the CPU.  If it delays
+	 * amount of time, blocking other process from the CPU.  If it delays
 	 * for ~5secs, a NMI error can occur.  A way around this is to give up
 	 * the processor via msleep, but this is not allowed is under lock.
 	 * So, only allow it to sleep for ~4secs if open.  Otherwise, delay for
@@ -1000,7 +999,7 @@ exit:
 /**
  * vxge_hw_device_hw_info_get - Get the hw information
  * Returns the vpath mask that has the bits set for each vpath allocated
- * for the driver, FW version information and the first mac addresse for
+ * for the driver, FW version information, and the first mac address for
  * each vpath
  */
 enum vxge_hw_status __devinit
@@ -1064,9 +1063,10 @@ vxge_hw_device_hw_info_get(void __iomem *bar0,
 
 		val64 = readq(&toc->toc_vpath_pointer[i]);
 
+		spin_lock_init(&vpath.lock);
 		vpath.vp_reg = (struct vxge_hw_vpath_reg __iomem *)
 			       (bar0 + val64);
-		vpath.vp_open = 0;
+		vpath.vp_open = VXGE_HW_VP_NOT_OPEN;
 
 		status = __vxge_hw_vpath_pci_func_mode_get(&vpath, hw_info);
 		if (status != VXGE_HW_OK)
@@ -1090,7 +1090,7 @@ vxge_hw_device_hw_info_get(void __iomem *bar0,
 		val64 = readq(&toc->toc_vpath_pointer[i]);
 		vpath.vp_reg = (struct vxge_hw_vpath_reg __iomem *)
 			       (bar0 + val64);
-		vpath.vp_open = 0;
+		vpath.vp_open = VXGE_HW_VP_NOT_OPEN;
 
 		status =  __vxge_hw_vpath_addr_get(&vpath,
 				hw_info->mac_addrs[i],
@@ -4646,7 +4646,27 @@ static void __vxge_hw_vp_terminate(struct __vxge_hw_device *hldev, u32 vp_id)
 		vpath->hldev->tim_int_mask1, vpath->vp_id);
 	hldev->stats.hw_dev_info_stats.vpath_info[vpath->vp_id] = NULL;
 
-	memset(vpath, 0, sizeof(struct __vxge_hw_virtualpath));
+	/* If the whole struct __vxge_hw_virtualpath is zeroed, nothing will
+	 * work after the interface is brought down.
+	 */
+	spin_lock(&vpath->lock);
+	vpath->vp_open = VXGE_HW_VP_NOT_OPEN;
+	spin_unlock(&vpath->lock);
+
+	vpath->vpmgmt_reg = NULL;
+	vpath->nofl_db = NULL;
+	vpath->max_mtu = 0;
+	vpath->vsport_number = 0;
+	vpath->max_kdfc_db = 0;
+	vpath->max_nofl_db = 0;
+	vpath->ringh = NULL;
+	vpath->fifoh = NULL;
+	memset(&vpath->vpath_handles, 0, sizeof(struct list_head));
+	vpath->stats_block = 0;
+	vpath->hw_stats = NULL;
+	vpath->hw_stats_sav = NULL;
+	vpath->sw_stats = NULL;
+
 exit:
 	return;
 }
@@ -4670,7 +4690,7 @@ __vxge_hw_vp_initialize(struct __vxge_hw_device *hldev, u32 vp_id,
 
 	vpath = &hldev->virtual_paths[vp_id];
 
-	spin_lock_init(&hldev->virtual_paths[vp_id].lock);
+	spin_lock_init(&vpath->lock);
 	vpath->vp_id = vp_id;
 	vpath->vp_open = VXGE_HW_VP_OPEN;
 	vpath->hldev = hldev;
@@ -5019,10 +5039,6 @@ enum vxge_hw_status vxge_hw_vpath_close(struct __vxge_hw_vpath_handle *vp)
 
 	__vxge_hw_vp_terminate(devh, vp_id);
 
-	spin_lock(&vpath->lock);
-	vpath->vp_open = VXGE_HW_VP_NOT_OPEN;
-	spin_unlock(&vpath->lock);
-
 vpath_close_exit:
 	return status;
 }
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/vxge/vxge-config.h
index 3c53aa732c9..359b9b9f804 100644
--- a/drivers/net/vxge/vxge-config.h
+++ b/drivers/net/vxge/vxge-config.h
@@ -412,44 +412,48 @@ struct vxge_hw_vp_config {
  * See also: struct vxge_hw_tim_intr_config{}.
  */
 struct vxge_hw_device_config {
-	u32				dma_blockpool_initial;
-	u32				dma_blockpool_max;
-#define VXGE_HW_MIN_DMA_BLOCK_POOL_SIZE			0
-#define VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE		0
-#define VXGE_HW_INCR_DMA_BLOCK_POOL_SIZE		4
-#define VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE			4096
-
-#define        VXGE_HW_MAX_PAYLOAD_SIZE_512		2
-
-	u32				intr_mode;
-#define VXGE_HW_INTR_MODE_IRQLINE			0
-#define VXGE_HW_INTR_MODE_MSIX				1
-#define VXGE_HW_INTR_MODE_MSIX_ONE_SHOT			2
-
-#define VXGE_HW_INTR_MODE_DEF				0
-
-	u32				rth_en;
-#define VXGE_HW_RTH_DISABLE				0
-#define VXGE_HW_RTH_ENABLE				1
-#define VXGE_HW_RTH_DEFAULT				0
-
-	u32				rth_it_type;
-#define VXGE_HW_RTH_IT_TYPE_SOLO_IT			0
-#define VXGE_HW_RTH_IT_TYPE_MULTI_IT			1
-#define VXGE_HW_RTH_IT_TYPE_DEFAULT			0
-
-	u32				rts_mac_en;
+	u32					device_poll_millis;
+#define VXGE_HW_MIN_DEVICE_POLL_MILLIS		1
+#define VXGE_HW_MAX_DEVICE_POLL_MILLIS		100000
+#define VXGE_HW_DEF_DEVICE_POLL_MILLIS		1000
+
+	u32					dma_blockpool_initial;
+	u32					dma_blockpool_max;
+#define VXGE_HW_MIN_DMA_BLOCK_POOL_SIZE		0
+#define VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE	0
+#define VXGE_HW_INCR_DMA_BLOCK_POOL_SIZE	4
+#define VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE		4096
+
+#define	VXGE_HW_MAX_PAYLOAD_SIZE_512		2
+
+	u32					intr_mode:2,
+#define VXGE_HW_INTR_MODE_IRQLINE		0
+#define VXGE_HW_INTR_MODE_MSIX			1
+#define VXGE_HW_INTR_MODE_MSIX_ONE_SHOT		2
+
+#define VXGE_HW_INTR_MODE_DEF			0
+
+						rth_en:1,
+#define VXGE_HW_RTH_DISABLE			0
+#define VXGE_HW_RTH_ENABLE			1
+#define VXGE_HW_RTH_DEFAULT			0
+
+						rth_it_type:1,
+#define VXGE_HW_RTH_IT_TYPE_SOLO_IT		0
+#define VXGE_HW_RTH_IT_TYPE_MULTI_IT		1
+#define VXGE_HW_RTH_IT_TYPE_DEFAULT		0
+
+						rts_mac_en:1,
 #define VXGE_HW_RTS_MAC_DISABLE			0
 #define VXGE_HW_RTS_MAC_ENABLE			1
 #define VXGE_HW_RTS_MAC_DEFAULT			0
 
-	struct vxge_hw_vp_config	vp_config[VXGE_HW_MAX_VIRTUAL_PATHS];
-
-	u32				device_poll_millis;
-#define VXGE_HW_MIN_DEVICE_POLL_MILLIS			1
-#define VXGE_HW_MAX_DEVICE_POLL_MILLIS			100000
-#define VXGE_HW_DEF_DEVICE_POLL_MILLIS			1000
+						hwts_en:1;
+#define	VXGE_HW_HWTS_DISABLE			0
+#define	VXGE_HW_HWTS_ENABLE			1
+#define	VXGE_HW_HWTS_DEFAULT			1
 
+	struct vxge_hw_vp_config vp_config[VXGE_HW_MAX_VIRTUAL_PATHS];
 };
 
 /**
diff --git a/drivers/net/vxge/vxge-ethtool.c b/drivers/net/vxge/vxge-ethtool.c
index c5eb034107f..92dd72d3f9d 100644
--- a/drivers/net/vxge/vxge-ethtool.c
+++ b/drivers/net/vxge/vxge-ethtool.c
@@ -33,7 +33,8 @@ static int vxge_ethtool_sset(struct net_device *dev, struct ethtool_cmd *info)
 {
 	/* We currently only support 10Gb/FULL */
 	if ((info->autoneg == AUTONEG_ENABLE) ||
-	    (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
+	    (ethtool_cmd_speed(info) != SPEED_10000) ||
+	    (info->duplex != DUPLEX_FULL))
 		return -EINVAL;
 
 	return 0;
@@ -58,10 +59,10 @@ static int vxge_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
 	info->transceiver = XCVR_EXTERNAL;
 
 	if (netif_carrier_ok(dev)) {
-		info->speed = SPEED_10000;
+		ethtool_cmd_speed_set(info, SPEED_10000);
 		info->duplex = DUPLEX_FULL;
 	} else {
-		info->speed = -1;
+		ethtool_cmd_speed_set(info, -1);
 		info->duplex = -1;
 	}
 
@@ -134,22 +135,29 @@ static void vxge_ethtool_gregs(struct net_device *dev,
 /**
  * vxge_ethtool_idnic - To physically identify the nic on the system.
  * @dev : device pointer.
- * @id : pointer to the structure with identification parameters given by
- * ethtool.
+ * @state : requested LED state
  *
  * Used to physically identify the NIC on the system.
- * The Link LED will blink for a time specified by the user.
- * Return value:
  * 0 on success
  */
-static int vxge_ethtool_idnic(struct net_device *dev, u32 data)
+static int vxge_ethtool_idnic(struct net_device *dev,
+			      enum ethtool_phys_id_state state)
 {
 	struct vxgedev *vdev = netdev_priv(dev);
 	struct __vxge_hw_device *hldev = vdev->devh;
 
-	vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_ON);
-	msleep_interruptible(data ? (data * HZ) : VXGE_MAX_FLICKER_TIME);
-	vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_OFF);
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_ON);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_OFF);
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -1064,35 +1072,6 @@ static int vxge_ethtool_get_regs_len(struct net_device *dev)
 	return sizeof(struct vxge_hw_vpath_reg) * vdev->no_of_vpath;
 }
 
-static u32 vxge_get_rx_csum(struct net_device *dev)
-{
-	struct vxgedev *vdev = netdev_priv(dev);
-
-	return vdev->rx_csum;
-}
-
-static int vxge_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct vxgedev *vdev = netdev_priv(dev);
-
-	if (data)
-		vdev->rx_csum = 1;
-	else
-		vdev->rx_csum = 0;
-
-	return 0;
-}
-
-static int vxge_ethtool_op_set_tso(struct net_device *dev, u32 data)
-{
-	if (data)
-		dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
-	else
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
-
-	return 0;
-}
-
 static int vxge_ethtool_get_sset_count(struct net_device *dev, int sset)
 {
 	struct vxgedev *vdev = netdev_priv(dev);
@@ -1112,40 +1091,6 @@ static int vxge_ethtool_get_sset_count(struct net_device *dev, int sset)
 	}
 }
 
-static int vxge_set_flags(struct net_device *dev, u32 data)
-{
-	struct vxgedev *vdev = netdev_priv(dev);
-	enum vxge_hw_status status;
-
-	if (ethtool_invalid_flags(dev, data, ETH_FLAG_RXHASH))
-		return -EINVAL;
-
-	if (!!(data & ETH_FLAG_RXHASH) == vdev->devh->config.rth_en)
-		return 0;
-
-	if (netif_running(dev) || (vdev->config.rth_steering == NO_STEERING))
-		return -EINVAL;
-
-	vdev->devh->config.rth_en = !!(data & ETH_FLAG_RXHASH);
-
-	/* Enabling RTH requires some of the logic in vxge_device_register and a
-	 * vpath reset.  Due to these restrictions, only allow modification
-	 * while the interface is down.
-	 */
-	status = vxge_reset_all_vpaths(vdev);
-	if (status != VXGE_HW_OK) {
-		vdev->devh->config.rth_en = !vdev->devh->config.rth_en;
-		return -EFAULT;
-	}
-
-	if (vdev->devh->config.rth_en)
-		dev->features |= NETIF_F_RXHASH;
-	else
-		dev->features &= ~NETIF_F_RXHASH;
-
-	return 0;
-}
-
 static int vxge_fw_flash(struct net_device *dev, struct ethtool_flash *parms)
 {
 	struct vxgedev *vdev = netdev_priv(dev);
@@ -1174,19 +1119,10 @@ static const struct ethtool_ops vxge_ethtool_ops = {
 	.get_link		= ethtool_op_get_link,
 	.get_pauseparam		= vxge_ethtool_getpause_data,
 	.set_pauseparam		= vxge_ethtool_setpause_data,
-	.get_rx_csum		= vxge_get_rx_csum,
-	.set_rx_csum		= vxge_set_rx_csum,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_ipv6_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
-	.get_tso		= ethtool_op_get_tso,
-	.set_tso		= vxge_ethtool_op_set_tso,
 	.get_strings		= vxge_ethtool_get_strings,
-	.phys_id		= vxge_ethtool_idnic,
+	.set_phys_id		= vxge_ethtool_idnic,
 	.get_sset_count		= vxge_ethtool_get_sset_count,
 	.get_ethtool_stats	= vxge_get_ethtool_stats,
-	.set_flags		= vxge_set_flags,
 	.flash_device		= vxge_fw_flash,
 };
 
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 395423aeec0..fc837cf6bd4 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -304,22 +304,14 @@ vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan,
 		"%s: %s:%d  skb protocol = %d",
 		ring->ndev->name, __func__, __LINE__, skb->protocol);
 
-	if (ring->gro_enable) {
-		if (ring->vlgrp && ext_info->vlan &&
-			(ring->vlan_tag_strip ==
-				VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
-			vlan_gro_receive(ring->napi_p, ring->vlgrp,
-					ext_info->vlan, skb);
-		else
-			napi_gro_receive(ring->napi_p, skb);
-	} else {
-		if (ring->vlgrp && vlan &&
-			(ring->vlan_tag_strip ==
-				VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
-			vlan_hwaccel_receive_skb(skb, ring->vlgrp, vlan);
-		else
-			netif_receive_skb(skb);
-	}
+	if (ring->vlgrp && ext_info->vlan &&
+		(ring->vlan_tag_strip ==
+			VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
+		vlan_gro_receive(ring->napi_p, ring->vlgrp,
+				ext_info->vlan, skb);
+	else
+		napi_gro_receive(ring->napi_p, skb);
+
 	vxge_debug_entryexit(VXGE_TRACE,
 		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
 }
@@ -490,7 +482,7 @@ vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr,
 
 		if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) &&
 		    !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) &&
-		    ring->rx_csum && /* Offload Rx side CSUM */
+		    (dev->features & NETIF_F_RXCSUM) && /* Offload Rx side CSUM */
 		    ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK &&
 		    ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK)
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2094,11 +2086,9 @@ static int vxge_open_vpaths(struct vxgedev *vdev)
 				vdev->config.fifo_indicate_max_pkts;
 			vpath->fifo.tx_vector_no = 0;
 			vpath->ring.rx_vector_no = 0;
-			vpath->ring.rx_csum = vdev->rx_csum;
 			vpath->ring.rx_hwts = vdev->rx_hwts;
 			vpath->is_open = 1;
 			vdev->vp_handles[i] = vpath->handle;
-			vpath->ring.gro_enable = vdev->config.gro_enable;
 			vpath->ring.vlan_tag_strip = vdev->vlan_tag_strip;
 			vdev->stats.vpaths_open++;
 		} else {
@@ -2282,7 +2272,7 @@ vxge_alarm_msix_handle(int irq, void *dev_id)
 		VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;
 
 	for (i = 0; i < vdev->no_of_vpath; i++) {
-		/* Reduce the chance of loosing alarm interrupts by masking
+		/* Reduce the chance of losing alarm interrupts by masking
 		 * the vector. A pending bit will be set if an alarm is
 		 * generated and on unmask the interrupt will be fired.
 		 */
@@ -2670,6 +2660,40 @@ static void vxge_poll_vp_lockup(unsigned long data)
 	mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000);
 }
 
+static u32 vxge_fix_features(struct net_device *dev, u32 features)
+{
+	u32 changed = dev->features ^ features;
+
+	/* Enabling RTH requires some of the logic in vxge_device_register and a
+	 * vpath reset.  Due to these restrictions, only allow modification
+	 * while the interface is down.
+	 */
+	if ((changed & NETIF_F_RXHASH) && netif_running(dev))
+		features ^= NETIF_F_RXHASH;
+
+	return features;
+}
+
+static int vxge_set_features(struct net_device *dev, u32 features)
+{
+	struct vxgedev *vdev = netdev_priv(dev);
+	u32 changed = dev->features ^ features;
+
+	if (!(changed & NETIF_F_RXHASH))
+		return 0;
+
+	/* !netif_running() ensured by vxge_fix_features() */
+
+	vdev->devh->config.rth_en = !!(features & NETIF_F_RXHASH);
+	if (vxge_reset_all_vpaths(vdev) != VXGE_HW_OK) {
+		dev->features = features ^ NETIF_F_RXHASH;
+		vdev->devh->config.rth_en = !!(dev->features & NETIF_F_RXHASH);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /**
  * vxge_open
  * @dev: pointer to the device structure.
@@ -2788,7 +2812,7 @@ static int vxge_open(struct net_device *dev)
 	}
 
 	/* Enable vpath to sniff all unicast/multicast traffic that not
-	 * addressed to them. We allow promiscous mode for PF only
+	 * addressed to them. We allow promiscuous mode for PF only
 	 */
 
 	val64 = 0;
@@ -2890,7 +2914,7 @@ out0:
 	return ret;
 }
 
-/* Loop throught the mac address list and delete all the entries */
+/* Loop through the mac address list and delete all the entries */
 static void vxge_free_mac_add_list(struct vxge_vpath *vpath)
 {
 
@@ -2957,7 +2981,7 @@ static int do_vxge_close(struct net_device *dev, int do_io)
 					val64);
 		}
 
-		/* Remove the function 0 from promiscous mode */
+		/* Remove the function 0 from promiscuous mode */
 		vxge_hw_mgmt_reg_write(vdev->devh,
 			vxge_hw_mgmt_reg_type_mrpcim,
 			0,
@@ -3112,8 +3136,7 @@ vxge_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *net_stats)
 	return net_stats;
 }
 
-static enum vxge_hw_status vxge_timestamp_config(struct vxgedev *vdev,
-						 int enable)
+static enum vxge_hw_status vxge_timestamp_config(struct __vxge_hw_device *devh)
 {
 	enum vxge_hw_status status;
 	u64 val64;
@@ -3123,27 +3146,24 @@ static enum vxge_hw_status vxge_timestamp_config(struct vxgedev *vdev,
 	 * required for the driver to load (due to a hardware bug),
 	 * there is no need to do anything special here.
 	 */
-	if (enable)
-		val64 = VXGE_HW_XMAC_TIMESTAMP_EN |
-			VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) |
-			VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0);
-	else
-		val64 = 0;
+	val64 = VXGE_HW_XMAC_TIMESTAMP_EN |
+		VXGE_HW_XMAC_TIMESTAMP_USE_LINK_ID(0) |
+		VXGE_HW_XMAC_TIMESTAMP_INTERVAL(0);
 
-	status = vxge_hw_mgmt_reg_write(vdev->devh,
+	status = vxge_hw_mgmt_reg_write(devh,
 					vxge_hw_mgmt_reg_type_mrpcim,
 					0,
 					offsetof(struct vxge_hw_mrpcim_reg,
 						 xmac_timestamp),
 					val64);
-	vxge_hw_device_flush_io(vdev->devh);
+	vxge_hw_device_flush_io(devh);
+	devh->config.hwts_en = VXGE_HW_HWTS_ENABLE;
 	return status;
 }
 
 static int vxge_hwtstamp_ioctl(struct vxgedev *vdev, void __user *data)
 {
 	struct hwtstamp_config config;
-	enum vxge_hw_status status;
 	int i;
 
 	if (copy_from_user(&config, data, sizeof(config)))
@@ -3164,10 +3184,6 @@ static int vxge_hwtstamp_ioctl(struct vxgedev *vdev, void __user *data)
 
 	switch (config.rx_filter) {
 	case HWTSTAMP_FILTER_NONE:
-		status = vxge_timestamp_config(vdev, 0);
-		if (status != VXGE_HW_OK)
-			return -EFAULT;
-
 		vdev->rx_hwts = 0;
 		config.rx_filter = HWTSTAMP_FILTER_NONE;
 		break;
@@ -3186,8 +3202,7 @@ static int vxge_hwtstamp_ioctl(struct vxgedev *vdev, void __user *data)
 	case HWTSTAMP_FILTER_PTP_V2_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_SYNC:
 	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
-		status = vxge_timestamp_config(vdev, 1);
-		if (status != VXGE_HW_OK)
+		if (vdev->devh->config.hwts_en != VXGE_HW_HWTS_ENABLE)
 			return -EFAULT;
 
 		vdev->rx_hwts = 1;
@@ -3378,6 +3393,8 @@ static const struct net_device_ops vxge_netdev_ops = {
 	.ndo_do_ioctl           = vxge_ioctl,
 	.ndo_set_mac_address    = vxge_set_mac_addr,
 	.ndo_change_mtu         = vxge_change_mtu,
+	.ndo_fix_features	= vxge_fix_features,
+	.ndo_set_features	= vxge_set_features,
 	.ndo_vlan_rx_register   = vxge_vlan_rx_register,
 	.ndo_vlan_rx_kill_vid   = vxge_vlan_rx_kill_vid,
 	.ndo_vlan_rx_add_vid	= vxge_vlan_rx_add_vid,
@@ -3424,14 +3441,21 @@ static int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
 	vdev->devh = hldev;
 	vdev->pdev = hldev->pdev;
 	memcpy(&vdev->config, config, sizeof(struct vxge_config));
-	vdev->rx_csum = 1;	/* Enable Rx CSUM by default. */
 	vdev->rx_hwts = 0;
 	vdev->titan1 = (vdev->pdev->revision == VXGE_HW_TITAN1_PCI_REVISION);
 
 	SET_NETDEV_DEV(ndev, &vdev->pdev->dev);
 
-	ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
-				NETIF_F_HW_VLAN_FILTER;
+	ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_SG |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO6 |
+		NETIF_F_HW_VLAN_TX;
+	if (vdev->config.rth_steering != NO_STEERING)
+		ndev->hw_features |= NETIF_F_RXHASH;
+
+	ndev->features |= ndev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
+
 	/*  Driver entry points */
 	ndev->irq = vdev->pdev->irq;
 	ndev->base_addr = (unsigned long) hldev->bar0;
@@ -3443,11 +3467,6 @@ static int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
 
 	vxge_initialize_ethtool_ops(ndev);
 
-	if (vdev->config.rth_steering != NO_STEERING) {
-		ndev->features |= NETIF_F_RXHASH;
-		hldev->config.rth_en = VXGE_HW_RTH_ENABLE;
-	}
-
 	/* Allocate memory for vpath */
 	vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) *
 				no_of_vpath, GFP_KERNEL);
@@ -3459,9 +3478,6 @@ static int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
 		goto _out1;
 	}
 
-	ndev->features |= NETIF_F_SG;
-
-	ndev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
 		"%s : checksuming enabled", __func__);
 
@@ -3471,11 +3487,6 @@ static int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
 			"%s : using High DMA", __func__);
 	}
 
-	ndev->features |= NETIF_F_TSO | NETIF_F_TSO6;
-
-	if (vdev->config.gro_enable)
-		ndev->features |= NETIF_F_GRO;
-
 	ret = register_netdev(ndev);
 	if (ret) {
 		vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
@@ -4005,15 +4016,6 @@ static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask)
 		vdev->config.tx_steering_type = 0;
 	}
 
-	if (vdev->config.gro_enable) {
-		vxge_debug_init(VXGE_ERR,
-			"%s: Generic receive offload enabled",
-			vdev->ndev->name);
-	} else
-		vxge_debug_init(VXGE_TRACE,
-			"%s: Generic receive offload disabled",
-			vdev->ndev->name);
-
 	if (vdev->config.addr_learn_en)
 		vxge_debug_init(VXGE_TRACE,
 			"%s: MAC Address learning enabled", vdev->ndev->name);
@@ -4575,12 +4577,29 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto _exit4;
 	}
 
+	/* Always enable HWTS.  This will always cause the FCS to be invalid,
+	 * due to the fact that HWTS is using the FCS as the location of the
+	 * timestamp.  The HW FCS checking will still correctly determine if
+	 * there is a valid checksum, and the FCS is being removed by the driver
+	 * anyway.  So no fucntionality is being lost.  Since it is always
+	 * enabled, we now simply use the ioctl call to set whether or not the
+	 * driver should be paying attention to the HWTS.
+	 */
+	if (is_privileged == VXGE_HW_OK) {
+		status = vxge_timestamp_config(hldev);
+		if (status != VXGE_HW_OK) {
+			vxge_debug_init(VXGE_ERR, "%s: HWTS enable failed",
+					VXGE_DRIVER_NAME);
+			ret = -EFAULT;
+			goto _exit4;
+		}
+	}
+
 	vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
 
 	/* set private device info */
 	pci_set_drvdata(pdev, hldev);
 
-	ll_config->gro_enable = VXGE_GRO_ALWAYS_AGGREGATE;
 	ll_config->fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
 	ll_config->addr_learn_en = addr_learn_en;
 	ll_config->rth_algorithm = RTH_ALG_JENKINS;
diff --git a/drivers/net/vxge/vxge-main.h b/drivers/net/vxge/vxge-main.h
index 40474f0da57..ed120aba443 100644
--- a/drivers/net/vxge/vxge-main.h
+++ b/drivers/net/vxge/vxge-main.h
@@ -168,9 +168,6 @@ struct vxge_config {
 
 #define	NEW_NAPI_WEIGHT	64
 	int		napi_weight;
-#define VXGE_GRO_DONOT_AGGREGATE		0
-#define VXGE_GRO_ALWAYS_AGGREGATE		1
-	int		gro_enable;
 	int		intr_type;
 #define INTA	0
 #define MSI	1
@@ -290,13 +287,11 @@ struct vxge_ring {
 	unsigned long interrupt_count;
 	unsigned long jiffies;
 
-	/* copy of the flag indicating whether rx_csum is to be used */
-	u32 rx_csum:1,
-	    rx_hwts:1;
+	/* copy of the flag indicating whether rx_hwts is to be used */
+	u32 rx_hwts:1;
 
 	int pkts_processed;
 	int budget;
-	int gro_enable;
 
 	struct napi_struct napi;
 	struct napi_struct *napi_p;
@@ -369,9 +364,8 @@ struct vxgedev {
 	 */
 	u16		all_multi_flg;
 
-	 /* A flag indicating whether rx_csum is to be used or not. */
-	u32	rx_csum:1,
-		rx_hwts:1,
+	/* A flag indicating whether rx_hwts is to be used or not. */
+	u32	rx_hwts:1,
 		titan1:1;
 
 	struct vxge_msix_entry *vxge_entries;
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index 8674f331311..2638b8d97b8 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -1111,7 +1111,7 @@ void vxge_hw_channel_dtr_free(struct __vxge_hw_channel *channel, void *dtrh)
  * vxge_hw_channel_dtr_count
  * @channel: Channel handle. Obtained via vxge_hw_channel_open().
  *
- * Retreive number of DTRs available. This function can not be called
+ * Retrieve number of DTRs available. This function can not be called
  * from data path. ring_initial_replenishi() is the only user.
  */
 int vxge_hw_channel_dtr_count(struct __vxge_hw_channel *channel)
@@ -2060,7 +2060,7 @@ enum vxge_hw_status vxge_hw_vpath_promisc_enable(
 
 	vpath = vp->vpath;
 
-	/* Enable promiscous mode for function 0 only */
+	/* Enable promiscuous mode for function 0 only */
 	if (!(vpath->hldev->access_rights &
 		VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM))
 		return VXGE_HW_OK;
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 9d9dfda4c7a..4a518a3b131 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -240,7 +240,7 @@ struct vxge_hw_tim_intr_config {
 	u32				btimer_val;
 #define VXGE_HW_MIN_TIM_BTIMER_VAL				0
 #define VXGE_HW_MAX_TIM_BTIMER_VAL				67108864
-#define VXGE_HW_USE_FLASH_DEFAULT				0xffffffff
+#define VXGE_HW_USE_FLASH_DEFAULT				(~0)
 
 	u32				timer_ac_en;
 #define VXGE_HW_TIM_TIMER_AC_ENABLE				1
@@ -681,7 +681,7 @@ struct vxge_hw_xmac_aggr_stats {
  * @rx_red_discard: Count of received frames that are discarded because of RED
  *            (Random Early Discard).
  * @rx_xgmii_ctrl_err_cnt: Maintains a count of unexpected or misplaced control
- *            characters occuring between times of normal data transmission
+ *            characters occurring between times of normal data transmission
  *            (i.e. not included in RX_XGMII_DATA_ERR_CNT). This counter is
  *            incremented when either -
  *            1) The Reconciliation Sublayer (RS) is expecting one control
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/vxge/vxge-version.h
index 581e21525e8..b9efa28bab3 100644
--- a/drivers/net/vxge/vxge-version.h
+++ b/drivers/net/vxge/vxge-version.h
@@ -16,8 +16,8 @@
 
 #define VXGE_VERSION_MAJOR	"2"
 #define VXGE_VERSION_MINOR	"5"
-#define VXGE_VERSION_FIX	"2"
-#define VXGE_VERSION_BUILD	"22259"
+#define VXGE_VERSION_FIX	"3"
+#define VXGE_VERSION_BUILD	"22640"
 #define VXGE_VERSION_FOR	"k"
 
 #define VXGE_FW_VER(maj, min, bld) (((maj) << 16) + ((min) << 8) + (bld))
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 10bafd59f9c..6fb6f8e667d 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -329,7 +329,7 @@ static int startmicrocode(struct cosa_data *cosa, int address);
 static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len);
 static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);
 
-/* Auxilliary functions */
+/* Auxiliary functions */
 static int get_wait_data(struct cosa_data *cosa);
 static int put_wait_data(struct cosa_data *cosa, int data);
 static int puthexnumber(struct cosa_data *cosa, int number);
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 1481a446fef..21b104db5a9 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -341,10 +341,6 @@ static int dlci_add(struct dlci_add *dlci)
 		}
 	}
 
-	err = dev_alloc_name(master, master->name);
-	if (err < 0)
-		goto err2;
-
 	*(short *)(master->dev_addr) = dlci->dlci;
 
 	dlp = netdev_priv(master);
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 4578e5b4b41..acb9ea83062 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -56,7 +56,7 @@
  * IV. Notes
  * The current error (XDU, RFO) recovery code is untested.
  * So far, RDO takes his RX channel down and the right sequence to enable it
- * again is still a mistery. If RDO happens, plan a reboot. More details
+ * again is still a mystery. If RDO happens, plan a reboot. More details
  * in the code (NB: as this happens, TX still works).
  * Don't mess the cables during operation, especially on DTE ports. I don't
  * suggest it for DCE either but at least one can get some messages instead
@@ -1065,7 +1065,7 @@ static int dscc4_open(struct net_device *dev)
 
 	/*
 	 * Due to various bugs, there is no way to reliably reset a
-	 * specific port (manufacturer's dependant special PCI #RST wiring
+	 * specific port (manufacturer's dependent special PCI #RST wiring
 	 * apart: it affects all ports). Thus the device goes in the best
 	 * silent mode possible at dscc4_close() time and simply claims to
 	 * be up if it's opened again. It still isn't possible to change
@@ -1230,9 +1230,9 @@ static inline int dscc4_check_clock_ability(int port)
  *   scaling. Of course some rounding may take place.
  * - no high speed mode (40Mb/s). May be trivial to do but I don't have an
  *   appropriate external clocking device for testing.
- * - no time-slot/clock mode 5: shameless lazyness.
+ * - no time-slot/clock mode 5: shameless laziness.
  *
- * The clock signals wiring can be (is ?) manufacturer dependant. Good luck.
+ * The clock signals wiring can be (is ?) manufacturer dependent. Good luck.
  *
  * BIG FAT WARNING: if the device isn't provided enough clocking signal, it
  * won't pass the init sequence. For example, straight back-to-back DTE without
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 0edb535bb2b..fc433f28c04 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1070,7 +1070,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
 	hdlc_device *hdlc = dev_to_hdlc(frad);
 	pvc_device *pvc;
 	struct net_device *dev;
-	int result, used;
+	int used;
 
 	if ((pvc = add_pvc(frad, dlci)) == NULL) {
 		printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n",
@@ -1106,13 +1106,6 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
 	dev->tx_queue_len = 0;
 	dev->ml_priv = pvc;
 
-	result = dev_alloc_name(dev, dev->name);
-	if (result < 0) {
-		free_netdev(dev);
-		delete_unused_pvcs(hdlc);
-		return result;
-	}
-
 	if (register_netdevice(dev) != 0) {
 		free_netdev(dev);
 		delete_unused_pvcs(hdlc);
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 48edc5f4dac..e817583e6ec 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -15,7 +15,7 @@
  *	The hardware does the bus handling to avoid the need for delays between
  *	touching control registers.
  *
- *	Port B isnt wired (why - beats me)
+ *	Port B isn't wired (why - beats me)
  *
  *	Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  */
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 6c571e19883..f1e1643dc3e 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -178,7 +178,7 @@
  *
  * The resulting average clock frequency (assuming 33.333 MHz oscillator) is:
  * freq = 66.666 MHz / (A + (B + 1) / (C + 1))
- * minumum freq = 66.666 MHz / (A + 1)
+ * minimum freq = 66.666 MHz / (A + 1)
  * maximum freq = 66.666 MHz / A
  *
  * Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7
@@ -230,7 +230,7 @@
 #define PKT_PIPE_MODE_WRITE		0x57
 
 /* HDLC packet status values - desc->status */
-#define ERR_SHUTDOWN		1 /* stop or shutdown occurrance */
+#define ERR_SHUTDOWN		1 /* stop or shutdown occurrence */
 #define ERR_HDLC_ALIGN		2 /* HDLC alignment error */
 #define ERR_HDLC_FCS		3 /* HDLC Frame Check Sum error */
 #define ERR_RXFREE_Q_EMPTY	4 /* RX-free queue became empty while receiving
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 7f5bb913c8b..eec463f99c0 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -338,10 +338,6 @@ static int lapbeth_new_device(struct net_device *dev)
 	dev_hold(dev);
 	lapbeth->ethdev = dev;
 
-	rc = dev_alloc_name(ndev, ndev->name);
-	if (rc < 0) 
-		goto fail;
-
 	rc = -EIO;
 	if (register_netdevice(ndev))
 		goto fail;
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 70feb84df67..b7f2358d23b 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -24,7 +24,7 @@
   *
   * Linux driver notes:
   * Linux uses the device struct lmc_private to pass private information
-  * arround.
+  * around.
   *
   * The initialization portion of this driver (the lmc_reset() and the
   * lmc_dec_reset() functions, as well as the led controls and the
diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h
index 65d01978e78..01ad45218d1 100644
--- a/drivers/net/wan/lmc/lmc_var.h
+++ b/drivers/net/wan/lmc/lmc_var.h
@@ -180,7 +180,7 @@ struct lmc___ctl {
 
 
 /*
- * Carefull, look at the data sheet, there's more to this
+ * Careful, look at the data sheet, there's more to this
  * structure than meets the eye.  It should probably be:
  *
  * struct tulip_desc_t {
@@ -380,7 +380,7 @@ struct lmc___softc {
 /* CSR6 settings */
 #define OPERATION_MODE  0x00000200 /* Full Duplex      */
 #define PROMISC_MODE    0x00000040 /* Promiscuous Mode */
-#define RECIEVE_ALL     0x40000000 /* Recieve All      */
+#define RECIEVE_ALL     0x40000000 /* Receive All      */
 #define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames  */
 
 /* Dec control registers  CSR6 as well */
@@ -398,7 +398,7 @@ struct lmc___softc {
 #define TULIP_CMD_RECEIVEALL    0x40000000L /* (RW)  Receivel all frames? */
 #define TULIP_CMD_MUSTBEONE     0x02000000L /* (RW)  Must Be One (21140) */
 #define TULIP_CMD_TXTHRSHLDCTL  0x00400000L /* (RW)  Transmit Threshold Mode (21140) */
-#define TULIP_CMD_STOREFWD      0x00200000L /* (RW)  Store and Foward (21140) */
+#define TULIP_CMD_STOREFWD      0x00200000L /* (RW)  Store and Forward (21140) */
 #define TULIP_CMD_NOHEARTBEAT   0x00080000L /* (RW)  No Heartbeat (21140) */
 #define TULIP_CMD_PORTSELECT    0x00040000L /* (RW)  Post Select (100Mb) (21140) */
 #define TULIP_CMD_FULLDUPLEX    0x00000200L /* (RW)  Full Duplex Mode */
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 93956861ea2..0806232e0f8 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -542,7 +542,7 @@ static void z8530_dma_tx(struct z8530_channel *chan)
 		z8530_tx(chan);
 		return;
 	}
-	/* This shouldnt occur in DMA mode */
+	/* This shouldn't occur in DMA mode */
 	printk(KERN_ERR "DMA tx - bogus event!\n");
 	z8530_tx(chan);
 }
@@ -1219,7 +1219,7 @@ static const char *z8530_type_name[]={
  *	@io: the port value in question
  *
  *	Describe a Z8530 in a standard format. We must pass the I/O as
- *	the port offset isnt predictable. The main reason for this function
+ *	the port offset isn't predictable. The main reason for this function
  *	is to try and get a common format of report.
  */
 
@@ -1588,7 +1588,7 @@ static void z8530_rx_done(struct z8530_channel *c)
 		unsigned long flags;
 		
 		/*
-		 *	Complete this DMA. Neccessary to find the length
+		 *	Complete this DMA. Necessary to find the length
 		 */		
 		 
 		flags=claim_dma_lock();
@@ -1657,7 +1657,7 @@ static void z8530_rx_done(struct z8530_channel *c)
 		 *	fifo length for this. Thus we want to flip to the new
 		 *	buffer and then mess around copying and allocating
 		 *	things. For the current case it doesn't matter but
-		 *	if you build a system where the sync irq isnt blocked
+		 *	if you build a system where the sync irq isn't blocked
 		 *	by the kernel IRQ disable then you need only block the
 		 *	sync IRQ for the RT_LOCK area.
 		 *
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index 12b84ed0e38..727d728649b 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -378,7 +378,7 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m,
  * the device's state as sometimes we need to do a link-renew (the BS
  * wants us to renew a DHCP lease, for example).
  *
- * In fact, doc says that everytime we get a link-up, we should do a
+ * In fact, doc says that every time we get a link-up, we should do a
  * DHCP negotiation...
  */
 static
@@ -675,7 +675,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code)
  *  - the ack message wasn't formatted correctly
  *
  * The returned skb has been allocated with wimax_msg_to_user_alloc(),
- * it contains the reponse in a netlink attribute and is ready to be
+ * it contains the response in a netlink attribute and is ready to be
  * passed up to user space with wimax_msg_to_user_send(). To access
  * the payload and its length, use wimax_msg_{data,len}() on the skb.
  *
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 65bc334ed57..47cae7150bc 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -654,7 +654,7 @@ void __i2400m_dev_reset_handle(struct work_struct *ws)
 	if (result == -EUCLEAN) {
 		/*
 		 * We come here because the reset during operational mode
-		 * wasn't successully done and need to proceed to a bus
+		 * wasn't successfully done and need to proceed to a bus
 		 * reset. For the dev_reset_handle() to be able to handle
 		 * the reset event later properly, we restore boot_mode back
 		 * to the state before previous reset. ie: just like we are
@@ -755,7 +755,7 @@ EXPORT_SYMBOL_GPL(i2400m_error_recovery);
  * Alloc the command and ack buffers for boot mode
  *
  * Get the buffers needed to deal with boot mode messages.  These
- * buffers need to be allocated before the sdio recieve irq is setup.
+ * buffers need to be allocated before the sdio receive irq is setup.
  */
 static
 int i2400m_bm_buf_alloc(struct i2400m *i2400m)
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 8b55a5b1415..85dadd5bf4b 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -54,7 +54,7 @@
  * endpoint and read from it in the notification endpoint. In SDIO we
  * talk to it via the write address and read from the read address.
  *
- * Upon entrance to boot mode, the device sends (preceeded with a few
+ * Upon entrance to boot mode, the device sends (preceded with a few
  * zero length packets (ZLPs) on the notification endpoint in USB) a
  * reboot barker (4 le32 words with the same value). We ack it by
  * sending the same barker to the device. The device acks with a
@@ -1589,7 +1589,7 @@ int i2400m_dev_bootstrap(struct i2400m *i2400m, enum i2400m_bri flags)
 		i2400m->fw_name = fw_name;
 		ret = i2400m_fw_bootstrap(i2400m, fw, flags);
 		release_firmware(fw);
-		if (ret >= 0)	/* firmware loaded succesfully */
+		if (ret >= 0)	/* firmware loaded successfully */
 			break;
 		i2400m->fw_name = NULL;
 	}
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index eb80243e22d..6650fde99e1 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -105,14 +105,14 @@ static inline void edc_init(struct edc *edc)
  *
  * @edc: pointer to error density counter.
  * @max_err: maximum number of errors we can accept over the timeframe
- * @timeframe: lenght of the timeframe (in jiffies).
+ * @timeframe: length of the timeframe (in jiffies).
  *
  * Returns: !0 1 if maximum acceptable errors per timeframe has been
  *     exceeded. 0 otherwise.
  *
  * This is way to determine if the number of acceptable errors per time
  * period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurences
+ * this scheme will not work, for example if there are periodic occurrences
  * of errors that straddle updates to the start time. This scheme is
  * sufficient for our usage.
  *
@@ -204,7 +204,7 @@ enum {
  *     usb_autopm_get/put_interface() barriers when executing
  *     commands. See doc in i2400mu_suspend() for more information.
  *
- * @rx_size_auto_shrink: if true, the rx_size is shrinked
+ * @rx_size_auto_shrink: if true, the rx_size is shrunk
  *     automatically based on the average size of the received
  *     transactions. This allows the receive code to allocate smaller
  *     chunks of memory and thus reduce pressure on the memory
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 030cbfd3170..5eacc653a94 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -526,7 +526,7 @@ struct i2400m_barker_db;
  *
  * @barker: barker type that the device uses; this is initialized by
  *     i2400m_is_boot_barker() the first time it is called. Then it
- *     won't change during the life cycle of the device and everytime
+ *     won't change during the life cycle of the device and every time
  *     a boot barker is received, it is just verified for it being the
  *     same.
  *
@@ -928,7 +928,7 @@ extern void i2400m_report_tlv_rf_switches_status(
 	struct i2400m *, const struct i2400m_tlv_rf_switches_status *);
 
 /*
- * Helpers for firmware backwards compability
+ * Helpers for firmware backwards compatibility
  *
  * As we aim to support at least the firmware version that was
  * released with the previous kernel/driver release, some code will be
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 94742e1eafe..2edd8fe1c1f 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -166,7 +166,7 @@ void i2400m_wake_tx_work(struct work_struct *ws)
 	d_fnstart(3, dev, "(ws %p i2400m %p skb %p)\n", ws, i2400m, skb);
 	result = -EINVAL;
 	if (skb == NULL) {
-		dev_err(dev, "WAKE&TX: skb dissapeared!\n");
+		dev_err(dev, "WAKE&TX: skb disappeared!\n");
 		goto out_put;
 	}
 	/* If we have, somehow, lost the connection after this was
diff --git a/drivers/net/wimax/i2400m/op-rfkill.c b/drivers/net/wimax/i2400m/op-rfkill.c
index 9e02b90b008..b0dba35a8ad 100644
--- a/drivers/net/wimax/i2400m/op-rfkill.c
+++ b/drivers/net/wimax/i2400m/op-rfkill.c
@@ -27,7 +27,7 @@
  * - report changes in the HW RF Kill switch [with
  *   wimax_rfkill_{sw,hw}_report(), which happens when we detect those
  *   indications coming through hardware reports]. We also do it on
- *   initialization to let the stack know the intial HW state.
+ *   initialization to let the stack know the initial HW state.
  *
  * - implement indications from the stack to change the SW RF Kill
  *   switch (coming from sysfs, the wimax stack or user space).
@@ -73,7 +73,7 @@ int i2400m_radio_is(struct i2400m *i2400m, enum wimax_rf_state state)
  * Generic Netlink will call this function when a message is sent from
  * userspace to change the software RF-Kill switch status.
  *
- * This function will set the device's sofware RF-Kill switch state to
+ * This function will set the device's software RF-Kill switch state to
  * match what is requested.
  *
  * NOTE: the i2400m has a strict state machine; we can only set the
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 844133b44af..2f94a872101 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -349,7 +349,7 @@ error_no_waiter:
  *
  * For reports: We can't clone the original skb where the data is
  * because we need to send this up via netlink; netlink has to add
- * headers and we can't overwrite what's preceeding the payload...as
+ * headers and we can't overwrite what's preceding the payload...as
  * it is another message. So we just dup them.
  */
 static
@@ -425,7 +425,7 @@ error_check:
  *
  * As in i2400m_rx_ctl(), we can't clone the original skb where the
  * data is because we need to send this up via netlink; netlink has to
- * add headers and we can't overwrite what's preceeding the
+ * add headers and we can't overwrite what's preceding the
  * payload...as it is another message. So we just dup them.
  */
 static
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index 3f819efc06b..4b30ed11d78 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -149,7 +149,7 @@
  * (with a moved message header to make sure it is size-aligned to
  * 16), TAIL room that was unusable (and thus is marked with a message
  * header that says 'skip this') and at the head of the buffer, an
- * imcomplete message with a couple of payloads.
+ * incomplete message with a couple of payloads.
  *
  * N   ___________________________________________________
  *    |                                                   |
@@ -819,7 +819,7 @@ EXPORT_SYMBOL_GPL(i2400m_tx);
  * the FIF that is ready for transmission.
  *
  * It sets the state in @i2400m to indicate the bus-specific driver is
- * transfering that message (i2400m->tx_msg_size).
+ * transferring that message (i2400m->tx_msg_size).
  *
  * Once the transfer is completed, call i2400m_tx_msg_sent().
  *
diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c
index b58ec56b86f..1fda46c55eb 100644
--- a/drivers/net/wimax/i2400m/usb-fw.c
+++ b/drivers/net/wimax/i2400m/usb-fw.c
@@ -169,7 +169,7 @@ retry:
  *
  * Command can be a raw command, which requires no preparation (and
  * which might not even be following the command format). Checks that
- * the right amount of data was transfered.
+ * the right amount of data was transferred.
  *
  * To satisfy USB requirements (no onstack, vmalloc or in data segment
  * buffers), we copy the command to i2400m->bm_cmd_buf and send it from
diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c
index a26483a812a..e3257681e36 100644
--- a/drivers/net/wimax/i2400m/usb-rx.c
+++ b/drivers/net/wimax/i2400m/usb-rx.c
@@ -58,7 +58,7 @@
  *    a zillion reads; by serializing, we are throttling.
  *
  *  - RX data processing can get heavy enough so that it is not
- *    appropiate for doing it in the USB callback; thus we run it in a
+ *    appropriate for doing it in the USB callback; thus we run it in a
  *    process context.
  *
  * We provide a read buffer of an arbitrary size (short of a page); if
diff --git a/drivers/net/wimax/i2400m/usb-tx.c b/drivers/net/wimax/i2400m/usb-tx.c
index c65b9979f87..ac357acfb3e 100644
--- a/drivers/net/wimax/i2400m/usb-tx.c
+++ b/drivers/net/wimax/i2400m/usb-tx.c
@@ -168,7 +168,7 @@ retry:
 /*
  * Get the next TX message in the TX FIFO and send it to the device
  *
- * Note we exit the loop if i2400mu_tx() fails; that funtion only
+ * Note we exit the loop if i2400mu_tx() fails; that function only
  * fails on hard error (failing to tx a buffer not being one of them,
  * see its doc).
  *
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index eb050efcdb4..aa9ff130e29 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1884,7 +1884,7 @@ static int airo_open(struct net_device *dev) {
 	/* Make sure the card is configured.
 	 * Wireless Extensions may postpone config changes until the card
 	 * is open (to pipeline changes and speed-up card setup). If
-	 * those changes are not yet commited, do it now - Jean II */
+	 * those changes are not yet committed, do it now - Jean II */
 	if (test_bit(FLAG_COMMIT, &ai->flags)) {
 		disable_MAC(ai, 1);
 		writeConfigRid(ai, 1);
@@ -1992,7 +1992,7 @@ static int mpi_send_packet (struct net_device *dev)
 /*
  * Magic, the cards firmware needs a length count (2 bytes) in the host buffer
  * right after  TXFID_HDR.The TXFID_HDR contains the status short so payloadlen
- * is immediatly after it. ------------------------------------------------
+ * is immediately after it. ------------------------------------------------
  *                         |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA|
  *                         ------------------------------------------------
  */
@@ -2006,7 +2006,7 @@ static int mpi_send_packet (struct net_device *dev)
 		sizeof(wifictlhdr8023) + 2 ;
 
 	/*
-	 * Firmware automaticly puts 802 header on so
+	 * Firmware automatically puts 802 header on so
 	 * we don't need to account for it in the length
 	 */
 	if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
@@ -2531,7 +2531,7 @@ static int mpi_init_descriptors (struct airo_info *ai)
 /*
  * We are setting up three things here:
  * 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid.
- * 2) Map PCI memory for issueing commands.
+ * 2) Map PCI memory for issuing commands.
  * 3) Allocate memory (shared) to send and receive ethernet frames.
  */
 static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci)
@@ -3947,7 +3947,7 @@ static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) {
 
 	if ( max_tries == -1 ) {
 		airo_print_err(ai->dev->name,
-			"Max tries exceeded when issueing command");
+			"Max tries exceeded when issuing command");
 		if (IN4500(ai, COMMAND) & COMMAND_BUSY)
 			OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
 		return ERROR;
@@ -4173,7 +4173,7 @@ done:
 }
 
 /*  Note, that we are using BAP1 which is also used by transmit, so
- *  make sure this isnt called when a transmit is happening */
+ *  make sure this isn't called when a transmit is happening */
 static int PC4500_writerid(struct airo_info *ai, u16 rid,
 			   const void *pBuf, int len, int lock)
 {
@@ -4767,7 +4767,7 @@ static int proc_stats_rid_open( struct inode *inode,
 		if (!statsLabels[i]) continue;
 		if (j+strlen(statsLabels[i])+16>4096) {
 			airo_print_warn(apriv->dev->name,
-			       "Potentially disasterous buffer overflow averted!");
+			       "Potentially disastrous buffer overflow averted!");
 			break;
 		}
 		j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i],
diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h
index d0a664039c8..03401539709 100644
--- a/drivers/net/wireless/ath/ath5k/ani.h
+++ b/drivers/net/wireless/ath/ath5k/ani.h
@@ -27,7 +27,7 @@
 #define ATH5K_ANI_RSSI_THR_HIGH		40
 #define ATH5K_ANI_RSSI_THR_LOW		7
 
-/* maximum availabe levels */
+/* maximum available levels */
 #define ATH5K_ANI_MAX_FIRSTEP_LVL	2
 #define ATH5K_ANI_MAX_NOISE_IMM_LVL	1
 
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index aaa0cd72b0d..22047628ccf 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1976,7 +1976,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
 
 #define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3
 	/* We use FUDGE to make sure the next TBTT is ahead of the current TU.
-	 * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
+	 * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
 	 * configuration we need to make sure it is bigger than that. */
 
 	if (bc_tsf == -1) {
@@ -1994,7 +1994,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
 		intval |= AR5K_BEACON_RESET_TSF;
 	} else if (bc_tsf > hw_tsf) {
 		/*
-		 * beacon received, SW merge happend but HW TSF not yet updated.
+		 * beacon received, SW merge happened but HW TSF not yet updated.
 		 * not possible to reconfigure timers yet, but next time we
 		 * receive a beacon with the same BSSID, the hardware will
 		 * automatically update the TSF and then we need to reconfigure
@@ -2693,7 +2693,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
 	synchronize_irq(sc->irq);
 	stop_tasklets(sc);
 
-	/* Save ani mode and disable ANI durring
+	/* Save ani mode and disable ANI during
 	 * reset. If we don't we might get false
 	 * PHY error interrupts. */
 	ani_mode = ah->ah_sc->ani_state.ani_mode;
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index dd7cd95c364..62172d58572 100644
--- a/drivers/net/wireless/ath/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -51,7 +51,7 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 	/*
 	 * Validate input
 	 * - Zero retries don't make sense.
-	 * - A zero rate will put the HW into a mode where it continously sends
+	 * - A zero rate will put the HW into a mode where it continuously sends
 	 *   noise on the channel, so it is important to avoid this.
 	 */
 	if (unlikely(tx_tries0 == 0)) {
@@ -196,7 +196,7 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
 	/*
 	 * Validate input
 	 * - Zero retries don't make sense.
-	 * - A zero rate will put the HW into a mode where it continously sends
+	 * - A zero rate will put the HW into a mode where it continuously sends
 	 *   noise on the channel, so it is important to avoid this.
 	 */
 	if (unlikely(tx_tries0 == 0)) {
@@ -307,7 +307,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 	/*
 	 * Rates can be 0 as long as the retry count is 0 too.
 	 * A zero rate and nonzero retry count will put the HW into a mode where
-	 * it continously sends noise on the channel, so it is important to
+	 * it continuously sends noise on the channel, so it is important to
 	 * avoid this.
 	 */
 	if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
@@ -349,7 +349,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 \***********************/
 
 /*
- * Proccess the tx status descriptor on 5210/5211
+ * Process the tx status descriptor on 5210/5211
  */
 static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
 		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
@@ -398,7 +398,7 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
 }
 
 /*
- * Proccess a tx status descriptor on 5212
+ * Process a tx status descriptor on 5212
  */
 static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
 		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
@@ -490,7 +490,7 @@ int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 }
 
 /*
- * Proccess the rx status descriptor on 5210/5211
+ * Process the rx status descriptor on 5210/5211
  */
 static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
 		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
@@ -573,7 +573,7 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
 }
 
 /*
- * Proccess the rx status descriptor on 5212
+ * Process the rx status descriptor on 5212
  */
 static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
 					struct ath5k_desc *desc,
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index e9263e4c7f3..1fef84f87c7 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1134,7 +1134,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
  *
  * To recreate the curves we read here the points and interpolate
  * later. Note that in most cases only 2 (higher and lower) curves are
- * used (like RF5112) but vendors have the oportunity to include all
+ * used (like RF5112) but vendors have the opportunity to include all
  * 4 curves on eeprom. The final curve (higher power) has an extra
  * point for better accuracy like RF5112.
  */
@@ -1360,7 +1360,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
 			/*
 			 * Pd gain 0 is not the last pd gain
 			 * so it only has 2 pd points.
-			 * Continue wih pd gain 1.
+			 * Continue with pd gain 1.
 			 */
 			pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
 
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 5cc4a2fe47b..296c316a834 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -58,7 +58,7 @@ static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
 	*csz = (int)u8tmp;
 
 	/*
-	 * This check was put in to avoid "unplesant" consequences if
+	 * This check was put in to avoid "unpleasant" consequences if
 	 * the bootrom has not fully initialized all PCI devices.
 	 * Sometimes the cache line size register is not set
 	 */
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 71b60b7c617..712a9ac4000 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -465,7 +465,7 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
 	}
 
 	/*
-	 * The AR5210 uses promiscous mode to detect radar activity
+	 * The AR5210 uses promiscuous mode to detect radar activity
 	 */
 	if (ah->ah_version == AR5K_AR5210 &&
 			(filter & AR5K_RX_FILTER_RADARERR)) {
@@ -699,8 +699,8 @@ ath5k_check_timer_win(int a, int b, int window, int intval)
  * The need for this function arises from the fact that we have 4 separate
  * HW timer registers (TIMER0 - TIMER3), which are closely related to the
  * next beacon target time (NBTT), and that the HW updates these timers
- * seperately based on the current TSF value. The hardware increments each
- * timer by the beacon interval, when the local TSF coverted to TU is equal
+ * separately based on the current TSF value. The hardware increments each
+ * timer by the beacon interval, when the local TSF converted to TU is equal
  * to the value stored in the timer.
  *
  * The reception of a beacon with the same BSSID can update the local HW TSF
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 62ce2f4e860..55441913344 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -335,11 +335,11 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
  * http://madwifi-project.org/ticket/1659
  * with various measurements and diagrams
  *
- * TODO: Deal with power drops due to probes by setting an apropriate
+ * TODO: Deal with power drops due to probes by setting an appropriate
  * tx power on the probe packets ! Make this part of the calibration process.
  */
 
-/* Initialize ah_gain durring attach */
+/* Initialize ah_gain during attach */
 int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
 {
 	/* Initialize the gain optimization values */
@@ -1049,7 +1049,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
 \**************************/
 
 /*
- * Convertion needed for RF5110
+ * Conversion needed for RF5110
  */
 static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
 {
@@ -1088,7 +1088,7 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
 }
 
 /*
- * Convertion needed for 5111
+ * Conversion needed for 5111
  */
 static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
 		struct ath5k_athchan_2ghz *athchan)
@@ -2201,7 +2201,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax,
 /*
  * Get the surrounding per-channel power calibration piers
  * for a given frequency so that we can interpolate between
- * them and come up with an apropriate dataset for our current
+ * them and come up with an appropriate dataset for our current
  * channel.
  */
 static void
@@ -2618,7 +2618,7 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah)
 /*
  * Set the gain boundaries and create final Power to PDADC table
  *
- * We can have up to 4 pd curves, we need to do a simmilar process
+ * We can have up to 4 pd curves, we need to do a similar process
  * as we do for RF5112. This time we don't have an edge_flag but we
  * set the gain boundaries on a separate register.
  */
@@ -2826,13 +2826,13 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 	u32 target = channel->center_freq;
 	int pdg, i;
 
-	/* Get surounding freq piers for this channel */
+	/* Get surrounding freq piers for this channel */
 	ath5k_get_chan_pcal_surrounding_piers(ah, channel,
 						&pcinfo_L,
 						&pcinfo_R);
 
 	/* Loop over pd gain curves on
-	 * surounding freq piers by index */
+	 * surrounding freq piers by index */
 	for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {
 
 		/* Fill curves in reverse order
@@ -2923,7 +2923,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 		}
 
 		/* Interpolate between curves
-		 * of surounding freq piers to
+		 * of surrounding freq piers to
 		 * get the final curve for this
 		 * pd gain. Re-use tmpL for interpolation
 		 * output */
@@ -2947,7 +2947,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 
 	/* Fill min and max power levels for this
 	 * channel by interpolating the values on
-	 * surounding channels to complete the dataset */
+	 * surrounding channels to complete the dataset */
 	ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target,
 					(s16) pcinfo_L->freq,
 					(s16) pcinfo_R->freq,
@@ -3179,7 +3179,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 
 	/* FIXME: TPC scale reduction */
 
-	/* Get surounding channels for per-rate power table
+	/* Get surrounding channels for per-rate power table
 	 * calibration */
 	ath5k_get_rate_pcal_data(ah, channel, &rate_info);
 
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index e1c9abd8c87..d12b827033c 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -132,8 +132,8 @@
  * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
  * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
  * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
- * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i
- * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what
+ * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i
+ * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what
  * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
  */
 #define AR5K_BSR		0x002c			/* Register Address */
@@ -283,7 +283,7 @@
  */
 #define AR5K_ISR		0x001c			/* Register Address [5210] */
 #define AR5K_PISR		0x0080			/* Register Address [5211+] */
-#define AR5K_ISR_RXOK		0x00000001	/* Frame successfuly recieved */
+#define AR5K_ISR_RXOK		0x00000001	/* Frame successfuly received */
 #define AR5K_ISR_RXDESC		0x00000002	/* RX descriptor request */
 #define AR5K_ISR_RXERR		0x00000004	/* Receive error */
 #define AR5K_ISR_RXNOFRM	0x00000008	/* No frame received (receive timeout) */
@@ -372,12 +372,12 @@
 /*
  * Interrupt Mask Registers
  *
- * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
+ * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
  * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
  */
 #define	AR5K_IMR		0x0020			/* Register Address [5210] */
 #define AR5K_PIMR		0x00a0			/* Register Address [5211+] */
-#define AR5K_IMR_RXOK		0x00000001	/* Frame successfuly recieved*/
+#define AR5K_IMR_RXOK		0x00000001	/* Frame successfuly received*/
 #define AR5K_IMR_RXDESC		0x00000002	/* RX descriptor request*/
 #define AR5K_IMR_RXERR		0x00000004	/* Receive error*/
 #define AR5K_IMR_RXNOFRM	0x00000008	/* No frame received (receive timeout)*/
@@ -895,7 +895,7 @@
 #define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep */
 #define AR5K_PCICFG_LED_BCTL		0x00001000	/* Led blink (?) [5210] */
 #define AR5K_PCICFG_RETRY_FIX		0x00001000	/* Enable pci core retry fix */
-#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts*/
+#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even with pending interrupts*/
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status */
 #define AR5K_PCICFG_LEDMODE		0x000e0000	/* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP	0x00000000	/* Blink on standard traffic [5211+] */
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 4800dfe8d8e..441bb33f17a 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -170,7 +170,7 @@ static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
 
 /**
  * ar5008_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios
- * @ah: atheros hardware stucture
+ * @ah: atheros hardware structure
  * @chan:
  *
  * For the external AR2133/AR5133 radios, takes the MHz channel value and set
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 6a6125ce6f3..729534c82e4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3238,7 +3238,7 @@ static int ar9300_compress_decision(struct ath_hw *ah,
 			eep = ar9003_eeprom_struct_find_by_id(reference);
 			if (eep == NULL) {
 				ath_dbg(common, ATH_DBG_EEPROM,
-					"cant find reference eeprom struct %d\n",
+					"can't find reference eeprom struct %d\n",
 					reference);
 				return -1;
 			}
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index 4d84295c09c..1b90ed8795c 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -358,7 +358,7 @@ ret:
  * HTC Messages are handled directly here and the obtained SKB
  * is freed.
  *
- * Sevice messages (Data, WMI) passed to the corresponding
+ * Service messages (Data, WMI) passed to the corresponding
  * endpoint RX handlers, which have to free the SKB.
  */
 void ath9k_htc_rx_msg(struct htc_target *htc_handle,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index bd18b1d01be..a198ee374b0 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2265,6 +2265,8 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
 static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
 {
 	struct ath_softc *sc = hw->priv;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	int timeout = 200; /* ms */
 	int i, j;
 	bool drain_txq;
@@ -2272,6 +2274,12 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
 	mutex_lock(&sc->mutex);
 	cancel_delayed_work_sync(&sc->tx_complete_work);
 
+	if (sc->sc_flags & SC_OP_INVALID) {
+		ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
+		mutex_unlock(&sc->mutex);
+		return;
+	}
+
 	if (drop)
 		timeout = 1;
 
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index f3cb54a6437..b8cbfc70721 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -44,7 +44,7 @@ static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
 	*csz = (int)u8tmp;
 
 	/*
-	 * This check was put in to avoid "unplesant" consequences if
+	 * This check was put in to avoid "unpleasant" consequences if
 	 * the bootrom has not fully initialized all PCI devices.
 	 * Sometimes the cache line size register is not set
 	 */
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 133502b9c83..17542214c93 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -792,7 +792,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 
 		tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
 	} else {
-		/* Set the choosen rate. No RTS for first series entry. */
+		/* Set the chosen rate. No RTS for first series entry. */
 		ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
 				       try_per_rate, rix, 0);
 	}
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index fa821b93a10..3779b8977d4 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -637,8 +637,8 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 				 (u32)ATH_AMPDU_LIMIT_MAX);
 
 	/*
-	 * h/w can accept aggregates upto 16 bit lengths (65535).
-	 * The IE, however can hold upto 65536, which shows up here
+	 * h/w can accept aggregates up to 16 bit lengths (65535).
+	 * The IE, however can hold up to 65536, which shows up here
 	 * as zero. Ignore 65536 since we  are constrained by hw.
 	 */
 	if (tid->an->maxampdu)
diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index 771c0217ea6..4da01a9f568 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -161,7 +161,7 @@ struct carl9170_sta_tid {
  * Naturally: The higher the limit, the faster the device CAN send.
  * However, even a slight over-commitment at the wrong time and the
  * hardware is doomed to send all already-queued frames at suboptimal
- * rates. This in turn leads to an enourmous amount of unsuccessful
+ * rates. This in turn leads to an enormous amount of unsuccessful
  * retries => Latency goes up, whereas the throughput goes down. CRASH!
  */
 #define CARL9170_NUM_TX_LIMIT_HARD	((AR9170_TXQ_DEPTH * 3) / 2)
diff --git a/drivers/net/wireless/ath/carl9170/phy.c b/drivers/net/wireless/ath/carl9170/phy.c
index b6b0de60050..b6ae0e179c8 100644
--- a/drivers/net/wireless/ath/carl9170/phy.c
+++ b/drivers/net/wireless/ath/carl9170/phy.c
@@ -427,7 +427,7 @@ static u32 carl9170_def_val(u32 reg, bool is_2ghz, bool is_40mhz)
 
 /*
  * initialize some phy regs from eeprom values in modal_header[]
- * acc. to band and bandwith
+ * acc. to band and bandwidth
  */
 static int carl9170_init_phy_from_eeprom(struct ar9170 *ar,
 				bool is_2ghz, bool is_40mhz)
diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c
index 84866a4b835..ec21ea9fd8d 100644
--- a/drivers/net/wireless/ath/carl9170/rx.c
+++ b/drivers/net/wireless/ath/carl9170/rx.c
@@ -849,7 +849,7 @@ static void carl9170_rx_stream(struct ar9170 *ar, void *buf, unsigned int len)
 				/*
 				 * nested carl9170_rx_stream call!
 				 *
-				 * termination is guranteed, even when the
+				 * termination is guaranteed, even when the
 				 * combined frame also have an element with
 				 * a bad tag.
 				 */
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index f82c400be28..2fb53d06751 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -430,7 +430,7 @@ static void carl9170_usb_rx_complete(struct urb *urb)
 			 * The system is too slow to cope with
 			 * the enormous workload. We have simply
 			 * run out of active rx urbs and this
-			 * unfortunatly leads to an unpredictable
+			 * unfortunately leads to an unpredictable
 			 * device.
 			 */
 
diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c
index eda470b2499..3f508e59f14 100644
--- a/drivers/net/wireless/ath/hw.c
+++ b/drivers/net/wireless/ath/hw.c
@@ -86,7 +86,7 @@
  * IFRAME-01:  0110
  *
  * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
+ * will not pass our check. This is because the bssid_mask tells the
  * hardware to only look at the second least significant bit and the
  * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
  * as 1, which does not match 0.
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 02b896208b1..028310f263c 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -269,7 +269,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
 	}
 
 	/*
-	 * If a country IE has been recieved check its rule for this
+	 * If a country IE has been received check its rule for this
 	 * channel first before enabling active scan. The passive scan
 	 * would have been enforced by the initial processing of our
 	 * custom regulatory domain.
@@ -478,7 +478,7 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 		wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 	} else {
 		/*
-		 * This gets applied in the case of the absense of CRDA,
+		 * This gets applied in the case of the absence of CRDA,
 		 * it's our own custom world regulatory domain, similar to
 		 * cfg80211's but we enable passive scanning.
 		 */
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 46e382ed46a..39a11e8af4f 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -439,7 +439,7 @@ static u8 mac_reader[] = {
 };
 
 struct atmel_private {
-	void *card; /* Bus dependent stucture varies for PCcard */
+	void *card; /* Bus dependent structure varies for PCcard */
 	int (*present_callback)(void *); /* And callback which uses it */
 	char firmware_id[32];
 	AtmelFWType firmware_type;
@@ -3895,7 +3895,7 @@ static int reset_atmel_card(struct net_device *dev)
 
 	   This routine is also responsible for initialising some
 	   hardware-specific fields in the atmel_private structure,
-	   including a copy of the firmware's hostinfo stucture
+	   including a copy of the firmware's hostinfo structure
 	   which is the route into the rest of the firmware datastructures. */
 
 	struct atmel_private *priv = netdev_priv(dev);
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index c96e19da294..05263516c11 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -99,7 +99,7 @@ static void atmel_detach(struct pcmcia_device *link)
 }
 
 /* Call-back function to interrogate PCMCIA-specific information
-   about the current existance of the card */
+   about the current existence of the card */
 static int card_present(void *arg)
 {
 	struct pcmcia_device *link = (struct pcmcia_device *)arg;
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 3c8200c6297..ee4d06f13e2 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -650,7 +650,7 @@ struct b43_request_fw_context {
 	char errors[B43_NR_FWTYPES][128];
 	/* Temporary buffer for storing the firmware name. */
 	char fwname[64];
-	/* A fatal error occured while requesting. Firmware reqest
+	/* A fatal error occurred while requesting. Firmware reqest
 	 * can not continue, as any other reqest will also fail. */
 	int fatal_failure;
 };
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index fff14adb273..eb415968698 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -72,6 +72,7 @@ MODULE_FIRMWARE("b43/ucode11.fw");
 MODULE_FIRMWARE("b43/ucode13.fw");
 MODULE_FIRMWARE("b43/ucode14.fw");
 MODULE_FIRMWARE("b43/ucode15.fw");
+MODULE_FIRMWARE("b43/ucode16_mimo.fw");
 MODULE_FIRMWARE("b43/ucode5.fw");
 MODULE_FIRMWARE("b43/ucode9.fw");
 
@@ -4028,7 +4029,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
 	b43_mac_enable(dev);
 	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 
-	/* Start maintainance work */
+	/* Start maintenance work */
 	b43_periodic_tasks_setup(dev);
 
 	b43_leds_init(dev);
diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h
index 8569fdd4c6b..5413c906a3e 100644
--- a/drivers/net/wireless/b43/phy_g.h
+++ b/drivers/net/wireless/b43/phy_g.h
@@ -164,7 +164,7 @@ struct b43_phy_g {
 	/* Current Interference Mitigation mode */
 	int interfmode;
 	/* Stack of saved values from the Interference Mitigation code.
-	 * Each value in the stack is layed out as follows:
+	 * Each value in the stack is laid out as follows:
 	 * bit 0-11:  offset
 	 * bit 12-15: register ID
 	 * bit 16-32: value
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 001e841f118..e789a89f104 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -703,7 +703,7 @@
 #define B43_NPHY_CHAN_ESTHANG			B43_PHY_N(0x21D) /* Channel estimate hang */
 #define B43_NPHY_FINERX2_CGC			B43_PHY_N(0x221) /* Fine RX 2 clock gate control */
 #define  B43_NPHY_FINERX2_CGC_DECGC		0x0008 /* Decode gated clocks */
-#define B43_NPHY_TXPCTL_INIT			B43_PHY_N(0x222) /* TX power controll init */
+#define B43_NPHY_TXPCTL_INIT			B43_PHY_N(0x222) /* TX power control init */
 #define  B43_NPHY_TXPCTL_INIT_PIDXI1		0x00FF /* Power index init 1 */
 #define  B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT	0
 #define B43_NPHY_PAPD_EN0			B43_PHY_N(0x297) /* PAPD Enable0 TBD */
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index c81b2f53b0c..23583be1ee0 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -488,7 +488,7 @@ struct b43legacy_phy {
 	/* Current Interference Mitigation mode */
 	int interfmode;
 	/* Stack of saved values from the Interference Mitigation code.
-	 * Each value in the stack is layed out as follows:
+	 * Each value in the stack is laid out as follows:
 	 * bit 0-11:  offset
 	 * bit 12-15: register ID
 	 * bit 16-32: value
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 18d63f57777..3d05dc15c6b 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -2359,7 +2359,7 @@ int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[],
 }
 
 
-/* Translate our list of Access Points & Stations to a card independant
+/* Translate our list of Access Points & Stations to a card independent
  * format that the Wireless Tools will understand - Jean II */
 int prism2_ap_translate_scan(struct net_device *dev,
 			     struct iw_request_info *info, char *buffer)
diff --git a/drivers/net/wireless/hostap/hostap_ap.h b/drivers/net/wireless/hostap/hostap_ap.h
index 655ceeba961..334e2d0b8e1 100644
--- a/drivers/net/wireless/hostap/hostap_ap.h
+++ b/drivers/net/wireless/hostap/hostap_ap.h
@@ -114,7 +114,7 @@ struct sta_info {
  * has passed since last received frame from the station, a nullfunc data
  * frame is sent to the station. If this frame is not acknowledged and no other
  * frames have been received, the station will be disassociated after
- * AP_DISASSOC_DELAY. Similarily, a the station will be deauthenticated after
+ * AP_DISASSOC_DELAY. Similarly, a the station will be deauthenticated after
  * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with
  * max inactivity timer. */
 #define AP_MAX_INACTIVITY_SEC (5 * 60)
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 6038633ef36..12de46407c7 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1945,7 +1945,7 @@ static char * __prism2_translate_scan(local_info_t *local,
 }
 
 
-/* Translate scan data returned from the card to a card independant
+/* Translate scan data returned from the card to a card independent
  * format that the Wireless Tools will understand - Jean II */
 static inline int prism2_translate_scan(local_info_t *local,
 					struct iw_request_info *info,
@@ -2043,7 +2043,7 @@ static inline int prism2_ioctl_giwscan_sta(struct net_device *dev,
 		 * until results are ready for various reasons.
 		 * First, managing wait queues is complex and racy
 		 * (there may be multiple simultaneous callers).
-		 * Second, we grab some rtnetlink lock before comming
+		 * Second, we grab some rtnetlink lock before coming
 		 * here (in dev_ioctl()).
 		 * Third, the caller can wait on the Wireless Event
 		 * - Jean II */
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 1d9aed64572..d5084829c9e 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -79,13 +79,8 @@ struct net_device * hostap_add_interface(struct local_info *local,
 	if (!rtnl_locked)
 		rtnl_lock();
 
-	ret = 0;
-	if (strchr(dev->name, '%'))
-		ret = dev_alloc_name(dev, dev->name);
-
 	SET_NETDEV_DEV(dev, mdev->dev.parent);
-	if (ret >= 0)
-		ret = register_netdevice(dev);
+	ret = register_netdevice(dev);
 
 	if (!rtnl_locked)
 		rtnl_unlock();
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index 1c66b3c1030..88dc6a52bdf 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -853,7 +853,7 @@ struct local_info {
 	struct work_struct comms_qual_update;
 
 	/* RSSI to dBm adjustment (for RX descriptor fields) */
-	int rssi_to_dBm; /* substract from RSSI to get approximate dBm value */
+	int rssi_to_dBm; /* subtract from RSSI to get approximate dBm value */
 
 	/* BSS list / protected by local->lock */
 	struct list_head bss_list;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 4b97f918daf..44307753587 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -63,7 +63,7 @@ When data is sent to the firmware, the first TBD is used to indicate to the
 firmware if a Command or Data is being sent.  If it is Command, all of the
 command information is contained within the physical address referred to by the
 TBD.  If it is Data, the first TBD indicates the type of data packet, number
-of fragments, etc.  The next TBD then referrs to the actual packet location.
+of fragments, etc.  The next TBD then refers to the actual packet location.
 
 The Tx flow cycle is as follows:
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 160881f234c..42c3fe37af6 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -1181,7 +1181,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv)
 /*
  * The following adds a new attribute to the sysfs representation
  * of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/)
- * used for controling the debug level.
+ * used for controlling the debug level.
  *
  * See the level definitions in ipw for details.
  */
@@ -3763,7 +3763,7 @@ static int ipw_queue_tx_init(struct ipw_priv *priv,
 
 	q->txb = kmalloc(sizeof(q->txb[0]) * count, GFP_KERNEL);
 	if (!q->txb) {
-		IPW_ERROR("vmalloc for auxilary BD structures failed\n");
+		IPW_ERROR("vmalloc for auxiliary BD structures failed\n");
 		return -ENOMEM;
 	}
 
@@ -5581,7 +5581,7 @@ static int ipw_find_adhoc_network(struct ipw_priv *priv,
 		return 0;
 	}
 
-	/* Verify privacy compatability */
+	/* Verify privacy compatibility */
 	if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) !=
 	    ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) {
 		IPW_DEBUG_MERGE("Network '%s (%pM)' excluded "
@@ -5808,7 +5808,7 @@ static int ipw_best_network(struct ipw_priv *priv,
 		return 0;
 	}
 
-	/* Verify privacy compatability */
+	/* Verify privacy compatibility */
 	if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) !=
 	    ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) {
 		IPW_DEBUG_ASSOC("Network '%s (%pM)' excluded "
@@ -8184,7 +8184,7 @@ static void ipw_handle_promiscuous_rx(struct ipw_priv *priv,
 static int is_network_packet(struct ipw_priv *priv,
 				    struct libipw_hdr_4addr *header)
 {
-	/* Filter incoming packets to determine if they are targetted toward
+	/* Filter incoming packets to determine if they are targeted toward
 	 * this network, discarding packets coming from ourselves */
 	switch (priv->ieee->iw_mode) {
 	case IW_MODE_ADHOC:	/* Header: Dest. | Source    | BSSID */
@@ -8340,9 +8340,9 @@ static void ipw_handle_mgmt_packet(struct ipw_priv *priv,
 }
 
 /*
- * Main entry function for recieving a packet with 80211 headers.  This
+ * Main entry function for receiving a packet with 80211 headers.  This
  * should be called when ever the FW has notified us that there is a new
- * skb in the recieve queue.
+ * skb in the receive queue.
  */
 static void ipw_rx(struct ipw_priv *priv)
 {
@@ -8683,7 +8683,7 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option)
  * functions defined in ipw_main to provide the HW interaction.
  *
  * The exception to this is the use of the ipw_get_ordinal()
- * function used to poll the hardware vs. making unecessary calls.
+ * function used to poll the hardware vs. making unnecessary calls.
  *
  */
 
@@ -10419,7 +10419,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv,
 
 	memset(&dummystats, 0, sizeof(dummystats));
 
-	/* Filtering of fragment chains is done agains the first fragment */
+	/* Filtering of fragment chains is done against the first fragment */
 	hdr = (void *)txb->fragments[0]->data;
 	if (libipw_is_management(le16_to_cpu(hdr->frame_control))) {
 		if (filter & IPW_PROM_NO_MGMT)
diff --git a/drivers/net/wireless/ipw2x00/libipw_rx.c b/drivers/net/wireless/ipw2x00/libipw_rx.c
index 0de1b189322..e5ad76cd77d 100644
--- a/drivers/net/wireless/ipw2x00/libipw_rx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_rx.c
@@ -925,7 +925,7 @@ drop_free:
 static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
 
 /*
-* Make ther structure we read from the beacon packet has
+* Make the structure we read from the beacon packet to have
 * the right values
 */
 static int libipw_verify_qos_info(struct libipw_qos_information_element
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-tx.c b/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
index fbec88d48f1..79ac081832f 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
@@ -316,12 +316,18 @@ int iwl4965_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	hdr_len = ieee80211_hdrlen(fc);
 
-	/* Find index into station table for destination station */
-	sta_id = iwl_legacy_sta_id_or_broadcast(priv, ctx, info->control.sta);
-	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
-			       hdr->addr1);
-		goto drop_unlock;
+	/* For management frames use broadcast id to do not break aggregation */
+	if (!ieee80211_is_data(fc))
+		sta_id = ctx->bcast_sta_id;
+	else {
+		/* Find index into station table for destination station */
+		sta_id = iwl_legacy_sta_id_or_broadcast(priv, ctx, info->control.sta);
+
+		if (sta_id == IWL_INVALID_STATION) {
+			IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
+				       hdr->addr1);
+			goto drop_unlock;
+		}
 	}
 
 	IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index 0073f923919..42df8321dae 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -1032,7 +1032,7 @@ int iwl_legacy_apm_init(struct iwl_priv *priv)
 	/*
 	 * Enable HAP INTA (interrupt from management bus) to
 	 * wake device's PCI Express link L1a -> L0s
-	 * NOTE:  This is no-op for 3945 (non-existant bit)
+	 * NOTE:  This is no-op for 3945 (non-existent bit)
 	 */
 	iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 				    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
@@ -2151,6 +2151,13 @@ int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed)
 			goto set_ch_out;
 		}
 
+		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+		    !iwl_legacy_is_channel_ibss(ch_info)) {
+			IWL_DEBUG_MAC80211(priv, "leave - not IBSS channel\n");
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
 		spin_lock_irqsave(&priv->lock, flags);
 
 		for_each_context(priv, ctx) {
diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h
index 2d87dba2cfa..be0106c6a2d 100644
--- a/drivers/net/wireless/iwlegacy/iwl-dev.h
+++ b/drivers/net/wireless/iwlegacy/iwl-dev.h
@@ -1411,6 +1411,12 @@ iwl_legacy_is_channel_passive(const struct iwl_channel_info *ch)
 	return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
 }
 
+static inline int
+iwl_legacy_is_channel_ibss(const struct iwl_channel_info *ch)
+{
+	return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0;
+}
+
 static inline void
 __iwl_legacy_free_pages(struct iwl_priv *priv, struct page *page)
 {
diff --git a/drivers/net/wireless/iwlegacy/iwl-fh.h b/drivers/net/wireless/iwlegacy/iwl-fh.h
index 4e20c7e5c88..6e6091816e3 100644
--- a/drivers/net/wireless/iwlegacy/iwl-fh.h
+++ b/drivers/net/wireless/iwlegacy/iwl-fh.h
@@ -436,7 +436,7 @@
  * @finished_rb_num [0:11] - Indicates the index of the current RB
  * 	in which the last frame was written to
  * @finished_fr_num [0:11] - Indicates the index of the RX Frame
- * 	which was transfered
+ * 	which was transferred
  */
 struct iwl_rb_status {
 	__le16 closed_rb_num;
diff --git a/drivers/net/wireless/iwlegacy/iwl-led.c b/drivers/net/wireless/iwlegacy/iwl-led.c
index 15eb8b70715..bda0d61b2c0 100644
--- a/drivers/net/wireless/iwlegacy/iwl-led.c
+++ b/drivers/net/wireless/iwlegacy/iwl-led.c
@@ -48,8 +48,21 @@ module_param(led_mode, int, S_IRUGO);
 MODULE_PARM_DESC(led_mode, "0=system default, "
 		"1=On(RF On)/Off(RF Off), 2=blinking");
 
+/* Throughput		OFF time(ms)	ON time (ms)
+ *	>300			25		25
+ *	>200 to 300		40		40
+ *	>100 to 200		55		55
+ *	>70 to 100		65		65
+ *	>50 to 70		75		75
+ *	>20 to 50		85		85
+ *	>10 to 20		95		95
+ *	>5 to 10		110		110
+ *	>1 to 5			130		130
+ *	>0 to 1			167		167
+ *	<=0					SOLID ON
+ */
 static const struct ieee80211_tpt_blink iwl_blink[] = {
-	{ .throughput = 0 * 1024 - 1, .blink_time = 334 },
+	{ .throughput = 0, .blink_time = 334 },
 	{ .throughput = 1 * 1024 - 1, .blink_time = 260 },
 	{ .throughput = 5 * 1024 - 1, .blink_time = 220 },
 	{ .throughput = 10 * 1024 - 1, .blink_time = 190 },
@@ -101,6 +114,11 @@ static int iwl_legacy_led_cmd(struct iwl_priv *priv,
 	if (priv->blink_on == on && priv->blink_off == off)
 		return 0;
 
+	if (off == 0) {
+		/* led is SOLID_ON */
+		on = IWL_LED_SOLID;
+	}
+
 	IWL_DEBUG_LED(priv, "Led blink time compensation=%u\n",
 			priv->cfg->base_params->led_compensation);
 	led_cmd.on = iwl_legacy_blink_compensation(priv, on,
diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c
index 60f597f796c..353234a02c6 100644
--- a/drivers/net/wireless/iwlegacy/iwl-scan.c
+++ b/drivers/net/wireless/iwlegacy/iwl-scan.c
@@ -143,7 +143,7 @@ static void iwl_legacy_do_scan_abort(struct iwl_priv *priv)
 		IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
 		iwl_legacy_force_scan_end(priv);
 	} else
-		IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n");
+		IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
 }
 
 /**
diff --git a/drivers/net/wireless/iwlegacy/iwl-sta.c b/drivers/net/wireless/iwlegacy/iwl-sta.c
index 47c9da3834e..66f0fb2bbe0 100644
--- a/drivers/net/wireless/iwlegacy/iwl-sta.c
+++ b/drivers/net/wireless/iwlegacy/iwl-sta.c
@@ -110,7 +110,7 @@ static int iwl_legacy_process_add_sta_resp(struct iwl_priv *priv,
 	/*
 	 * XXX: The MAC address in the command buffer is often changed from
 	 * the original sent to the device. That is, the MAC address
-	 * written to the command buffer often is not the same MAC adress
+	 * written to the command buffer often is not the same MAC address
 	 * read from the command buffer when the command returns. This
 	 * issue has not yet been resolved and this debugging is left to
 	 * observe the problem.
diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c
index f781b7e225b..af2ae22fcfd 100644
--- a/drivers/net/wireless/iwlegacy/iwl4965-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c
@@ -2992,15 +2992,15 @@ static void iwl4965_bg_txpower_work(struct work_struct *work)
 	struct iwl_priv *priv = container_of(work, struct iwl_priv,
 			txpower_work);
 
+	mutex_lock(&priv->mutex);
+
 	/* If a scan happened to start before we got here
 	 * then just return; the statistics notification will
 	 * kick off another scheduled work to compensate for
 	 * any temperature delta we missed here. */
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
 	    test_bit(STATUS_SCANNING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
+		goto out;
 
 	/* Regardless of if we are associated, we must reconfigure the
 	 * TX power since frames can be sent on non-radar channels while
@@ -3010,7 +3010,7 @@ static void iwl4965_bg_txpower_work(struct work_struct *work)
 	/* Update last_temperature to keep is_calib_needed from running
 	 * when it isn't needed... */
 	priv->last_temperature = priv->temperature;
-
+out:
 	mutex_unlock(&priv->mutex);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
index 34d77d22a36..0d5fda44c3a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
@@ -67,7 +67,7 @@ int iwl_alloc_isr_ict(struct iwl_priv *priv)
 	if (!priv->_agn.ict_tbl_vir)
 		return -ENOMEM;
 
-	/* align table to PAGE_SIZE boundry */
+	/* align table to PAGE_SIZE boundary */
 	priv->_agn.aligned_ict_tbl_dma = ALIGN(priv->_agn.ict_tbl_dma, PAGE_SIZE);
 
 	IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n",
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 9acf0e9d7bd..4974cd7837c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -580,12 +580,17 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	hdr_len = ieee80211_hdrlen(fc);
 
-	/* Find index into station table for destination station */
-	sta_id = iwl_sta_id_or_broadcast(priv, ctx, info->control.sta);
-	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
-			       hdr->addr1);
-		goto drop_unlock_priv;
+	/* For management frames use broadcast id to do not break aggregation */
+	if (!ieee80211_is_data(fc))
+		sta_id = ctx->bcast_sta_id;
+	else {
+		/* Find index into station table for destination station */
+		sta_id = iwl_sta_id_or_broadcast(priv, ctx, info->control.sta);
+		if (sta_id == IWL_INVALID_STATION) {
+			IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
+				       hdr->addr1);
+			goto drop_unlock_priv;
+		}
 	}
 
 	IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h
index b90924e890a..6dfa806aefe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -434,7 +434,7 @@
  * @finished_rb_num [0:11] - Indicates the index of the current RB
  * 	in which the last frame was written to
  * @finished_fr_num [0:11] - Indicates the index of the RX Frame
- * 	which was transfered
+ * 	which was transferred
  */
 struct iwl_rb_status {
 	__le16 closed_rb_num;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index c517f6d8a15..d60d630cb93 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -143,7 +143,7 @@ static void iwl_do_scan_abort(struct iwl_priv *priv)
 		IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
 		iwl_force_scan_end(priv);
 	} else
-		IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n");
+		IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
 }
 
 /**
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
index 907ac890997..1cabcb39643 100644
--- a/drivers/net/wireless/iwmc3200wifi/hal.c
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -57,7 +57,7 @@
  *   This is due to the fact the host talks exclusively
  *   to the UMAC and so there needs to be a special UMAC
  *   command for talking to the LMAC.
- *   This is how a wifi command is layed out:
+ *   This is how a wifi command is laid out:
  *    ------------------------
  *   | iwm_udma_out_wifi_hdr  |
  *    ------------------------
@@ -72,7 +72,7 @@
  *   Those commands are handled by the device's bootrom,
  *   and are typically sent when the UMAC and the LMAC
  *   are not yet available.
- *    *   This is how a non-wifi command is layed out:
+ *    *   This is how a non-wifi command is laid out:
  *    ---------------------------
  *   | iwm_udma_out_nonwifi_hdr  |
  *    ---------------------------
diff --git a/drivers/net/wireless/iwmc3200wifi/tx.c b/drivers/net/wireless/iwmc3200wifi/tx.c
index 3216621fc55..be98074c060 100644
--- a/drivers/net/wireless/iwmc3200wifi/tx.c
+++ b/drivers/net/wireless/iwmc3200wifi/tx.c
@@ -197,7 +197,7 @@ int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb)
 	spin_lock(&iwm->tx_credit.lock);
 
 	if (!iwm_tx_credit_ok(iwm, id, nb)) {
-		IWM_DBG_TX(iwm, DBG, "No credit avaliable for pool[%d]\n", id);
+		IWM_DBG_TX(iwm, DBG, "No credit available for pool[%d]\n", id);
 		ret = -ENOSPC;
 		goto out;
 	}
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index 60fd1afe89a..1453eec82a9 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -70,7 +70,7 @@ rdrf
 	These commands are used to read the MAC, BBP and RF registers from the
 	card.  These commands take one parameter that specifies the offset
 	location that is to be read.  This parameter must be specified in
-	hexadecimal (its possible to preceed preceding the number with a "0x").
+	hexadecimal (its possible to precede preceding the number with a "0x").
 
 	Path: /sys/kernel/debug/libertas_wireless/ethX/registers/
 
@@ -84,7 +84,7 @@ wrrf
 	These commands are used to write the MAC, BBP and RF registers in the
 	card.  These commands take two parameters that specify the offset
 	location and the value that is to be written. This parameters must
-	be specified in hexadecimal (its possible to preceed the number
+	be specified in hexadecimal (its possible to precede the number
 	with a "0x").
 
 	Usage:
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index a2e88498c09..5d637af2d7c 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1360,7 +1360,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 		 * we remove all keys like in the WPA/WPA2 setup,
 		 * we just don't set RSN.
 		 *
-		 * Therefore: fall-throught
+		 * Therefore: fall-through
 		 */
 	case WLAN_CIPHER_SUITE_TKIP:
 	case WLAN_CIPHER_SUITE_CCMP:
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 6d59b4cf8fc..84566db486d 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1354,8 +1354,8 @@ int lbs_execute_next_command(struct lbs_private *priv)
 				    cpu_to_le16(PS_MODE_ACTION_EXIT_PS)) {
 					lbs_deb_host(
 					       "EXEC_NEXT_CMD: ignore ENTER_PS cmd\n");
-					list_del(&cmdnode->list);
 					spin_lock_irqsave(&priv->driver_lock, flags);
+					list_del(&cmdnode->list);
 					lbs_complete_command(priv, cmdnode, 0);
 					spin_unlock_irqrestore(&priv->driver_lock, flags);
 
@@ -1367,8 +1367,8 @@ int lbs_execute_next_command(struct lbs_private *priv)
 				    (priv->psstate == PS_STATE_PRE_SLEEP)) {
 					lbs_deb_host(
 					       "EXEC_NEXT_CMD: ignore EXIT_PS cmd in sleep\n");
-					list_del(&cmdnode->list);
 					spin_lock_irqsave(&priv->driver_lock, flags);
+					list_del(&cmdnode->list);
 					lbs_complete_command(priv, cmdnode, 0);
 					spin_unlock_irqrestore(&priv->driver_lock, flags);
 					priv->needtowakeup = 1;
@@ -1381,7 +1381,9 @@ int lbs_execute_next_command(struct lbs_private *priv)
 				       "EXEC_NEXT_CMD: sending EXIT_PS\n");
 			}
 		}
+		spin_lock_irqsave(&priv->driver_lock, flags);
 		list_del(&cmdnode->list);
+		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		lbs_deb_host("EXEC_NEXT_CMD: sending command 0x%04x\n",
 			    le16_to_cpu(cmd->command));
 		lbs_submit_command(priv, cmdnode);
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h
index 9745bd407d7..e450e31fd11 100644
--- a/drivers/net/wireless/libertas/if_spi.h
+++ b/drivers/net/wireless/libertas/if_spi.h
@@ -66,7 +66,7 @@
 #define IF_SPI_HOST_INT_CTRL_REG 0x40	/* Host interrupt controller reg */
 
 #define IF_SPI_CARD_INT_CAUSE_REG 0x44	/* Card interrupt cause reg */
-#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interupt status reg */
+#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interrupt status reg */
 #define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */
 #define IF_SPI_CARD_INT_STATUS_MASK_REG	0x50 /* Card interrupt status mask */
 
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 56f439d5801..9d4a40ee16c 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -62,7 +62,7 @@ MODULE_PARM_DESC(fake_hw_scan, "Install fake (no-op) hw-scan handler");
  * 	an intersection to occur but each device will still use their
  * 	respective regulatory requested domains. Subsequent radios will
  * 	use the resulting intersection.
- * @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We acomplish
+ * @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We accomplish
  *	this by using a custom beacon-capable regulatory domain for the first
  *	radio. All other device world roam.
  * @HWSIM_REGTEST_CUSTOM_WORLD: Used for testing the custom world regulatory
@@ -1515,19 +1515,10 @@ static int __init init_mac80211_hwsim(void)
 	if (hwsim_mon == NULL)
 		goto failed;
 
-	rtnl_lock();
-
-	err = dev_alloc_name(hwsim_mon, hwsim_mon->name);
+	err = register_netdev(hwsim_mon);
 	if (err < 0)
 		goto failed_mon;
 
-
-	err = register_netdevice(hwsim_mon);
-	if (err < 0)
-		goto failed_mon;
-
-	rtnl_unlock();
-
 	return 0;
 
 failed_mon:
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 44957cac61e..f0582259c93 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -705,10 +705,6 @@ static struct mwifiex_private *mwifiex_add_interface(
 		dev_err(adapter->dev, "no memory available for netdevice\n");
 		goto error;
 	}
-	if (dev_alloc_name(dev, dev->name)) {
-		dev_err(adapter->dev, "unable to alloc name for netdevice\n");
-		goto error;
-	}
 
 	if (mwifiex_register_cfg80211(dev, adapter->priv[bss_index]->curr_addr,
 				      adapter->priv[bss_index]) != 0) {
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index b4772c1c613..3c7877a7c31 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -1031,7 +1031,7 @@ int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
 	else
 		buf.tsc[4] = 0x10;
 
-	/* Wait upto 100ms for tx queue to empty */
+	/* Wait up to 100ms for tx queue to empty */
 	for (k = 100; k > 0; k--) {
 		udelay(1000);
 		ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index c5c1254ec09..a5a6d9e647b 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -494,7 +494,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 
 		if (slot < 0) {
 			/*
-			 * The device supports the choosen algorithm, but the
+			 * The device supports the chosen algorithm, but the
 			 * firmware does not provide enough key slots to store
 			 * all of them.
 			 * But encryption offload for outgoing frames is always
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 7ecc0bda57b..6d9204fef90 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -287,7 +287,7 @@ static void p54spi_power_on(struct p54s_priv *priv)
 	enable_irq(gpio_to_irq(p54spi_gpio_irq));
 
 	/*
-	 * need to wait a while before device can be accessed, the lenght
+	 * need to wait a while before device can be accessed, the length
 	 * is just a guess
 	 */
 	msleep(10);
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index d44f8e20cce..266d45bf86f 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -113,7 +113,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	 * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
 	 * and add WDS address information */
 	if (likely(((long) skb->data & 0x03) | init_wds)) {
-		/* get the number of bytes to add and re-allign */
+		/* get the number of bytes to add and re-align */
 		offset = (4 - (long) skb->data) & 0x03;
 		offset += init_wds ? 6 : 0;
 
@@ -342,7 +342,7 @@ islpci_eth_receive(islpci_private *priv)
 			 priv->pci_map_rx_address[index],
 			 MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);
 
-	/* update the skb structure and allign the buffer */
+	/* update the skb structure and align the buffer */
 	skb_put(skb, size);
 	if (offset) {
 		/* shift the buffer allocation offset bytes to get the right frame */
diff --git a/drivers/net/wireless/rayctl.h b/drivers/net/wireless/rayctl.h
index 49d9b267bc0..d7646f299bd 100644
--- a/drivers/net/wireless/rayctl.h
+++ b/drivers/net/wireless/rayctl.h
@@ -578,7 +578,7 @@ struct tx_msg {
     UCHAR  var[1];
 };
 
-/****** ECF Receive Control Stucture (RCS) Area at Shared RAM offset 0x0800  */
+/****** ECF Receive Control Structure (RCS) Area at Shared RAM offset 0x0800  */
 /* Structures for command specific parameters (rcs.var) */
 struct rx_packet_cmd {
     UCHAR rx_data_ptr[2];
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 47a04d2dad4..f67bc9b31b2 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -618,7 +618,7 @@
  * READ_CONTROL: 0 write BBP, 1 read BBP
  * BUSY: ASIC is busy executing BBP commands
  * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
- * BBP_RW_MODE: 0 serial, 1 paralell
+ * BBP_RW_MODE: 0 serial, 1 parallel
  */
 #define BBP_CSR_CFG			0x101c
 #define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 93fb67491ac..2a6aa85cc6c 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1550,7 +1550,7 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
 	if (rf->channel > 14) {
 		/*
 		 * When TX power is below 0, we should increase it by 7 to
-		 * make it a positive value (Minumum value is -7).
+		 * make it a positive value (Minimum value is -7).
 		 * However this means that values between 0 and 7 have
 		 * double meaning, and we should set a 7DBm boost flag.
 		 */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 73d3332be61..c446db69bd3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -490,13 +490,13 @@ struct rt2x00intf_conf {
 	enum nl80211_iftype type;
 
 	/*
-	 * TSF sync value, this is dependant on the operation type.
+	 * TSF sync value, this is dependent on the operation type.
 	 */
 	enum tsf_sync sync;
 
 	/*
-	 * The MAC and BSSID addressess are simple array of bytes,
-	 * these arrays are little endian, so when sending the addressess
+	 * The MAC and BSSID addresses are simple array of bytes,
+	 * these arrays are little endian, so when sending the addresses
 	 * to the drivers, copy the it into a endian-signed variable.
 	 *
 	 * Note that all devices (except rt2500usb) have 32 bits
@@ -1173,7 +1173,7 @@ void rt2x00queue_stop_queue(struct data_queue *queue);
  * @drop: True to drop all pending frames.
  *
  * This function will flush the queue. After this call
- * the queue is guarenteed to be empty.
+ * the queue is guaranteed to be empty.
  */
 void rt2x00queue_flush_queue(struct data_queue *queue, bool drop);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index edebbf04bc5..555180d8f4a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -60,7 +60,7 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
 	 * Note that when NULL is passed as address we will send
 	 * 00:00:00:00:00 to the device to clear the address.
 	 * This will prevent the device being confused when it wants
-	 * to ACK frames or consideres itself associated.
+	 * to ACK frames or considers itself associated.
 	 */
 	memset(conf.mac, 0, sizeof(conf.mac));
 	if (mac)
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index e1e0c51fcde..1bb9d46077f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -237,7 +237,7 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
 	}
 
 	/*
-	 * NOTE: Always count the payload as transfered,
+	 * NOTE: Always count the payload as transferred,
 	 * even when alignment was set to zero. This is required
 	 * for determining the correct offset for the ICV data.
 	 */
diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h
index 5d6e0b83151..063ebcce97f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dump.h
+++ b/drivers/net/wireless/rt2x00/rt2x00dump.h
@@ -51,7 +51,7 @@
  *   [rt2x00dump header][hardware descriptor][ieee802.11 frame]
  *
  * rt2x00dump header: The description of the dumped frame, as well as
- *	additional information usefull for debugging. See &rt2x00dump_hdr.
+ *	additional information useful for debugging. See &rt2x00dump_hdr.
  * hardware descriptor: Descriptor that was used to receive or transmit
  *	the frame.
  * ieee802.11 frame: The actual frame that was received or transmitted.
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index fa55399be19..ea10b0068f8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -273,7 +273,7 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev)
 	/**
 	 * While scanning, link tuning is disabled. By default
 	 * the most sensitive settings will be used to make sure
-	 * that all beacons and probe responses will be recieved
+	 * that all beacons and probe responses will be received
 	 * during the scan.
 	 */
 	if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 56f9d0df9c6..ab8c16f8bca 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -615,7 +615,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 	}
 
 	/*
-	 * When DMA allocation is required we should guarentee to the
+	 * When DMA allocation is required we should guarantee to the
 	 * driver that the DMA is aligned to a 4-byte boundary.
 	 * However some drivers require L2 padding to pad the payload
 	 * rather then the header. This could be a requirement for
@@ -760,7 +760,7 @@ bool rt2x00queue_for_each_entry(struct data_queue *queue,
 	spin_unlock_irqrestore(&queue->index_lock, irqflags);
 
 	/*
-	 * Start from the TX done pointer, this guarentees that we will
+	 * Start from the TX done pointer, this guarantees that we will
 	 * send out all frames in the correct order.
 	 */
 	if (index_start < index_end) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 36f4d03eff6..167d45873dc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -345,8 +345,8 @@ struct txentry_desc {
  *	only be touched after the device has signaled it is done with it.
  * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting
  *	for the signal to start sending.
- * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured
- *	while transfering the data to the hardware. No TX status report will
+ * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occurred
+ *	while transferring the data to the hardware. No TX status report will
  *	be expected from the hardware.
  * @ENTRY_DATA_STATUS_PENDING: The entry has been send to the device and
  *	returned. It is now waiting for the status reporting before the
@@ -367,7 +367,7 @@ enum queue_entry_flags {
  * @last_action: Timestamp of last change.
  * @queue: The data queue (&struct data_queue) to which this entry belongs.
  * @skb: The buffer which is currently being transmitted (for TX queue),
- *	or used to directly recieve data in (for RX queue).
+ *	or used to directly receive data in (for RX queue).
  * @entry_idx: The entry index number.
  * @priv_data: Private data belonging to this queue entry. The pointer
  *	points to data specific to a particular driver and queue type.
@@ -391,7 +391,7 @@ struct queue_entry {
  * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is
  *	owned by the hardware then the queue is considered to be full.
  * @Q_INDEX_DMA_DONE: Index pointer for the next entry which will have been
- *	transfered to the hardware.
+ *	transferred to the hardware.
  * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by
  *	the hardware and for which we need to run the txdone handler. If this
  *	entry is not owned by the hardware the queue is considered to be empty.
@@ -635,7 +635,7 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
 }
 
 /**
- * rt2x00queue_status_timeout - Check if a timeout occured for STATUS reports
+ * rt2x00queue_status_timeout - Check if a timeout occurred for STATUS reports
  * @entry: Queue entry to check.
  */
 static inline int rt2x00queue_status_timeout(struct queue_entry *entry)
@@ -646,7 +646,7 @@ static inline int rt2x00queue_status_timeout(struct queue_entry *entry)
 }
 
 /**
- * rt2x00queuedma__timeout - Check if a timeout occured for DMA transfers
+ * rt2x00queue_dma_timeout - Check if a timeout occurred for DMA transfers
  * @entry: Queue entry to check.
  */
 static inline int rt2x00queue_dma_timeout(struct queue_entry *entry)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index dc6b662ad5f..8f90f626807 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -226,7 +226,7 @@ static void rt2x00usb_work_txdone_entry(struct queue_entry *entry)
 	/*
 	 * If the transfer to hardware succeeded, it does not mean the
 	 * frame was send out correctly. It only means the frame
-	 * was succesfully pushed to the hardware, we have no
+	 * was successfully pushed to the hardware, we have no
 	 * way to determine the transmission status right now.
 	 * (Only indirectly by looking at the failed TX counters
 	 * in the register).
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index a69f1875887..323ca7b2b09 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -413,7 +413,7 @@ void rt2x00usb_flush_queue(struct data_queue *queue, bool drop);
  * @rt2x00dev: Pointer to &struct rt2x00_dev
  *
  * Check the health of the USB communication and determine
- * if timeouts have occured. If this is the case, this function
+ * if timeouts have occurred. If this is the case, this function
  * will reset all communication to restore functionality again.
  */
 void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index d3666573d6b..ccb6da38fe2 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -698,7 +698,7 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw,
 			 *because hw will nerver use hw_rate
 			 *when tcb_desc->use_driver_rate = false
 			 *so we never set highest N rate here,
-			 *and N rate will all be controled by FW
+			 *and N rate will all be controlled by FW
 			 *when tcb_desc->use_driver_rate = false
 			 */
 			if (sta && (sta->ht_cap.ht_supported)) {
diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c
index 714858abc4a..8f6718f163e 100644
--- a/drivers/net/wireless/rtlwifi/regd.c
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -233,7 +233,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
 	}
 
 	/*
-	 *If a country IE has been recieved check its rule for this
+	 *If a country IE has been received check its rule for this
 	 *channel first before enabling active scan. The passive scan
 	 *would have been enforced by the initial processing of our
 	 *custom regulatory domain.
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index a406c616b69..693395ee98f 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1598,7 +1598,7 @@ struct rtl_priv {
 
 
 /***************************************
-    Bluetooth Co-existance Related
+    Bluetooth Co-existence Related
 ****************************************/
 
 enum bt_ant_num {
diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c
index 0ade4bd617c..81f164bc488 100644
--- a/drivers/net/wireless/wl1251/cmd.c
+++ b/drivers/net/wireless/wl1251/cmd.c
@@ -104,7 +104,7 @@ int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
  * @wl: wl struct
  * @id: acx id
  * @buf: buffer for the response, including all headers, must work with dma
- * @len: lenght of buf
+ * @len: length of buf
  */
 int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
 {
diff --git a/drivers/net/wireless/wl1251/rx.c b/drivers/net/wireless/wl1251/rx.c
index c1b3b3f03da..6af35265c90 100644
--- a/drivers/net/wireless/wl1251/rx.c
+++ b/drivers/net/wireless/wl1251/rx.c
@@ -179,7 +179,7 @@ static void wl1251_rx_body(struct wl1251 *wl,
 	rx_buffer = skb_put(skb, length);
 	wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
 
-	/* The actual lenght doesn't include the target's alignment */
+	/* The actual length doesn't include the target's alignment */
 	skb->len = desc->length  - PLCP_HEADER_LENGTH;
 
 	fc = (u16 *)skb->data;
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 2116a376c3f..42935ac7266 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -454,7 +454,7 @@ int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
  * @wl: wl struct
  * @id: acx id
  * @buf: buffer for the response, including all headers, must work with dma
- * @len: lenght of buf
+ * @len: length of buf
  */
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
 {
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index ba558fcc76d..1ab6c86aac4 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -528,7 +528,7 @@ struct conf_rx_settings {
 #define CONF_TX_RATE_RETRY_LIMIT       10
 
 /*
- * Rates supported for data packets when operating as AP. Note the absense
+ * Rates supported for data packets when operating as AP. Note the absence
  * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop
  * one. The rate dropped is not mandatory under any operating mode.
  */
@@ -616,7 +616,7 @@ enum conf_tx_ac {
 	CONF_TX_AC_BK = 1,         /* background */
 	CONF_TX_AC_VI = 2,         /* video */
 	CONF_TX_AC_VO = 3,         /* voice */
-	CONF_TX_AC_CTS2SELF = 4,   /* fictious AC, follows AC_VO */
+	CONF_TX_AC_CTS2SELF = 4,   /* fictitious AC, follows AC_VO */
 	CONF_TX_AC_ANY_TID = 0x1f
 };
 
@@ -1210,7 +1210,7 @@ struct conf_memory_settings {
 
 	/*
 	 * Minimum required free tx memory blocks in order to assure optimum
-	 * performence
+	 * performance
 	 *
 	 * Range: 0-120
 	 */
@@ -1218,7 +1218,7 @@ struct conf_memory_settings {
 
 	/*
 	 * Minimum required free rx memory blocks in order to assure optimum
-	 * performence
+	 * performance
 	 *
 	 * Range: 0-120
 	 */
diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h
index 36e185583ec..beed621a8ae 100644
--- a/drivers/net/wireless/wl12xx/io.h
+++ b/drivers/net/wireless/wl12xx/io.h
@@ -94,7 +94,7 @@ static inline int wl1271_translate_addr(struct wl1271 *wl, int addr)
 	 * translated region.
 	 *
 	 * The translated regions occur next to each other in physical device
-	 * memory, so just add the sizes of the preceeding address regions to
+	 * memory, so just add the sizes of the preceding address regions to
 	 * get the offset to the new region.
 	 *
 	 * Currently, only the two first regions are addressed, and the
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 610be03a198..bc00e52f644 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1350,6 +1350,7 @@ static struct notifier_block wl1271_dev_notifier = {
 	.notifier_call = wl1271_dev_notify,
 };
 
+#ifdef CONFIG_PM
 static int wl1271_configure_suspend(struct wl1271 *wl)
 {
 	int ret;
@@ -1493,6 +1494,7 @@ static int wl1271_op_resume(struct ieee80211_hw *hw)
 
 	return 0;
 }
+#endif
 
 static int wl1271_op_start(struct ieee80211_hw *hw)
 {
@@ -3650,8 +3652,10 @@ static const struct ieee80211_ops wl1271_ops = {
 	.stop = wl1271_op_stop,
 	.add_interface = wl1271_op_add_interface,
 	.remove_interface = wl1271_op_remove_interface,
+#ifdef CONFIG_PM
 	.suspend = wl1271_op_suspend,
 	.resume = wl1271_op_resume,
+#endif
 	.config = wl1271_op_config,
 	.prepare_multicast = wl1271_op_prepare_multicast,
 	.configure_filter = wl1271_op_configure_filter,
diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 92d29a860fc..536e5065454 100644
--- a/drivers/net/wireless/wl12xx/sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -330,6 +330,7 @@ static void __devexit wl1271_remove(struct sdio_func *func)
 	wl1271_free_hw(wl);
 }
 
+#ifdef CONFIG_PM
 static int wl1271_suspend(struct device *dev)
 {
 	/* Tell MMC/SDIO core it's OK to power down the card
@@ -385,15 +386,18 @@ static const struct dev_pm_ops wl1271_sdio_pm_ops = {
 	.suspend	= wl1271_suspend,
 	.resume		= wl1271_resume,
 };
+#endif
 
 static struct sdio_driver wl1271_sdio_driver = {
 	.name		= "wl1271_sdio",
 	.id_table	= wl1271_devices,
 	.probe		= wl1271_probe,
 	.remove		= __devexit_p(wl1271_remove),
+#ifdef CONFIG_PM
 	.drv = {
 		.pm = &wl1271_sdio_pm_ops,
 	},
+#endif
 };
 
 static int __init wl1271_init(void)
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 3e5befe4d03..fc08f36fe1f 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -290,7 +290,7 @@ static void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest,
  *  \               \- IEEE 802.11 -/ \-------------- len --------------/
  *   \-struct wl3501_80211_tx_hdr--/   \-------- Ethernet Frame -------/
  *
- * Return = Postion in Card
+ * Return = Position in Card
  */
 static u16 wl3501_get_tx_buffer(struct wl3501_card *this, u16 len)
 {
@@ -1932,7 +1932,7 @@ static int wl3501_config(struct pcmcia_device *link)
 	this->base_addr = dev->base_addr;
 
 	if (!wl3501_get_flash_mac_addr(this)) {
-		printk(KERN_WARNING "%s: Cant read MAC addr in flash ROM?\n",
+		printk(KERN_WARNING "%s: Can't read MAC addr in flash ROM?\n",
 		       dev->name);
 		unregister_netdev(dev);
 		goto failed;
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
index 03254261425..784d9ccb8fe 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
@@ -169,7 +169,7 @@ static int rf2959_init_hw(struct zd_rf *rf)
 		{ ZD_CR85,  0x00 }, { ZD_CR86,  0x10 }, { ZD_CR87,  0x2A },
 		{ ZD_CR88,  0x10 }, { ZD_CR89,  0x24 }, { ZD_CR90,  0x18 },
 		/* { ZD_CR91,  0x18 }, */
-		/* should solve continous CTS frame problems */
+		/* should solve continuous CTS frame problems */
 		{ ZD_CR91,  0x00 },
 		{ ZD_CR92,  0x0a }, { ZD_CR93,  0x00 }, { ZD_CR94,  0x01 },
 		{ ZD_CR95,  0x00 }, { ZD_CR96,  0x40 }, { ZD_CR97,  0x37 },
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
index 860b0af7dc3..c4d324e19c2 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
@@ -355,7 +355,7 @@ static int uw2453_init_hw(struct zd_rf *rf)
 	};
 
 	static const u32 rv[] = {
-		UW2453_REGWRITE(4, 0x2b),    /* configure reciever gain */
+		UW2453_REGWRITE(4, 0x2b),    /* configure receiver gain */
 		UW2453_REGWRITE(5, 0x19e4f), /* configure transmitter gain */
 		UW2453_REGWRITE(6, 0xf81ad), /* enable RX/TX filter tuning */
 		UW2453_REGWRITE(7, 0x3fffe), /* disable TX gain in test mode */
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 5d7bbf2b2ee..161f207786a 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -73,9 +73,6 @@ struct xenvif {
 	struct vm_struct *tx_comms_area;
 	struct vm_struct *rx_comms_area;
 
-	/* Flags that must not be set in dev->features */
-	u32 features_disabled;
-
 	/* Frontend feature information. */
 	u8 can_sg:1;
 	u8 gso:1;
@@ -109,8 +106,8 @@ struct xenvif {
 	wait_queue_head_t waiting_to_free;
 };
 
-#define XEN_NETIF_TX_RING_SIZE __RING_SIZE((struct xen_netif_tx_sring *)0, PAGE_SIZE)
-#define XEN_NETIF_RX_RING_SIZE __RING_SIZE((struct xen_netif_rx_sring *)0, PAGE_SIZE)
+#define XEN_NETIF_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
+#define XEN_NETIF_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
 
 struct xenvif *xenvif_alloc(struct device *parent,
 			    domid_t domid,
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index de569cc19da..0ca86f9ec4e 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -165,69 +165,18 @@ static int xenvif_change_mtu(struct net_device *dev, int mtu)
 	return 0;
 }
 
-static void xenvif_set_features(struct xenvif *vif)
-{
-	struct net_device *dev = vif->dev;
-	u32 features = dev->features;
-
-	if (vif->can_sg)
-		features |= NETIF_F_SG;
-	if (vif->gso || vif->gso_prefix)
-		features |= NETIF_F_TSO;
-	if (vif->csum)
-		features |= NETIF_F_IP_CSUM;
-
-	features &= ~(vif->features_disabled);
-
-	if (!(features & NETIF_F_SG) && dev->mtu > ETH_DATA_LEN)
-		dev->mtu = ETH_DATA_LEN;
-
-	dev->features = features;
-}
-
-static int xenvif_set_tx_csum(struct net_device *dev, u32 data)
-{
-	struct xenvif *vif = netdev_priv(dev);
-	if (data) {
-		if (!vif->csum)
-			return -EOPNOTSUPP;
-		vif->features_disabled &= ~NETIF_F_IP_CSUM;
-	} else {
-		vif->features_disabled |= NETIF_F_IP_CSUM;
-	}
-
-	xenvif_set_features(vif);
-	return 0;
-}
-
-static int xenvif_set_sg(struct net_device *dev, u32 data)
+static u32 xenvif_fix_features(struct net_device *dev, u32 features)
 {
 	struct xenvif *vif = netdev_priv(dev);
-	if (data) {
-		if (!vif->can_sg)
-			return -EOPNOTSUPP;
-		vif->features_disabled &= ~NETIF_F_SG;
-	} else {
-		vif->features_disabled |= NETIF_F_SG;
-	}
 
-	xenvif_set_features(vif);
-	return 0;
-}
+	if (!vif->can_sg)
+		features &= ~NETIF_F_SG;
+	if (!vif->gso && !vif->gso_prefix)
+		features &= ~NETIF_F_TSO;
+	if (!vif->csum)
+		features &= ~NETIF_F_IP_CSUM;
 
-static int xenvif_set_tso(struct net_device *dev, u32 data)
-{
-	struct xenvif *vif = netdev_priv(dev);
-	if (data) {
-		if (!vif->gso && !vif->gso_prefix)
-			return -EOPNOTSUPP;
-		vif->features_disabled &= ~NETIF_F_TSO;
-	} else {
-		vif->features_disabled |= NETIF_F_TSO;
-	}
-
-	xenvif_set_features(vif);
-	return 0;
+	return features;
 }
 
 static const struct xenvif_stat {
@@ -274,12 +223,6 @@ static void xenvif_get_strings(struct net_device *dev, u32 stringset, u8 * data)
 }
 
 static struct ethtool_ops xenvif_ethtool_ops = {
-	.get_tx_csum	= ethtool_op_get_tx_csum,
-	.set_tx_csum	= xenvif_set_tx_csum,
-	.get_sg		= ethtool_op_get_sg,
-	.set_sg		= xenvif_set_sg,
-	.get_tso	= ethtool_op_get_tso,
-	.set_tso	= xenvif_set_tso,
 	.get_link	= ethtool_op_get_link,
 
 	.get_sset_count = xenvif_get_sset_count,
@@ -293,6 +236,7 @@ static struct net_device_ops xenvif_netdev_ops = {
 	.ndo_open	= xenvif_open,
 	.ndo_stop	= xenvif_close,
 	.ndo_change_mtu	= xenvif_change_mtu,
+	.ndo_fix_features = xenvif_fix_features,
 };
 
 struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
@@ -331,7 +275,8 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 	vif->credit_timeout.expires = jiffies;
 
 	dev->netdev_ops	= &xenvif_netdev_ops;
-	xenvif_set_features(vif);
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
+	dev->features = dev->hw_features;
 	SET_ETHTOOL_OPS(dev, &xenvif_ethtool_ops);
 
 	dev->tx_queue_len = XENVIF_QUEUE_LENGTH;
@@ -367,8 +312,6 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
 	if (vif->irq)
 		return 0;
 
-	xenvif_set_features(vif);
-
 	err = xen_netbk_map_frontend_rings(vif, tx_ring_ref, rx_ring_ref);
 	if (err < 0)
 		goto err;
@@ -384,9 +327,12 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
 	xenvif_get(vif);
 
 	rtnl_lock();
-	netif_carrier_on(vif->dev);
 	if (netif_running(vif->dev))
 		xenvif_up(vif);
+	if (!vif->can_sg && vif->dev->mtu > ETH_DATA_LEN)
+		dev_set_mtu(vif->dev, ETH_DATA_LEN);
+	netdev_update_features(vif->dev);
+	netif_carrier_on(vif->dev);
 	rtnl_unlock();
 
 	return 0;
diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 22b8c350599..1ce729d6af7 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -26,7 +26,7 @@ struct backend_info {
 	struct xenvif *vif;
 	enum xenbus_state frontend_state;
 	struct xenbus_watch hotplug_status_watch;
-	int have_hotplug_status_watch:1;
+	u8 have_hotplug_status_watch:1;
 };
 
 static int connect_rings(struct backend_info *);
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 5c8d9c385be..db9a763aaa7 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1140,6 +1140,42 @@ static void xennet_uninit(struct net_device *dev)
 	gnttab_free_grant_references(np->gref_rx_head);
 }
 
+static u32 xennet_fix_features(struct net_device *dev, u32 features)
+{
+	struct netfront_info *np = netdev_priv(dev);
+	int val;
+
+	if (features & NETIF_F_SG) {
+		if (xenbus_scanf(XBT_NIL, np->xbdev->otherend, "feature-sg",
+				 "%d", &val) < 0)
+			val = 0;
+
+		if (!val)
+			features &= ~NETIF_F_SG;
+	}
+
+	if (features & NETIF_F_TSO) {
+		if (xenbus_scanf(XBT_NIL, np->xbdev->otherend,
+				 "feature-gso-tcpv4", "%d", &val) < 0)
+			val = 0;
+
+		if (!val)
+			features &= ~NETIF_F_TSO;
+	}
+
+	return features;
+}
+
+static int xennet_set_features(struct net_device *dev, u32 features)
+{
+	if (!(features & NETIF_F_SG) && dev->mtu > ETH_DATA_LEN) {
+		netdev_info(dev, "Reducing MTU because no SG offload");
+		dev->mtu = ETH_DATA_LEN;
+	}
+
+	return 0;
+}
+
 static const struct net_device_ops xennet_netdev_ops = {
 	.ndo_open            = xennet_open,
 	.ndo_uninit          = xennet_uninit,
@@ -1148,6 +1184,8 @@ static const struct net_device_ops xennet_netdev_ops = {
 	.ndo_change_mtu	     = xennet_change_mtu,
 	.ndo_set_mac_address = eth_mac_addr,
 	.ndo_validate_addr   = eth_validate_addr,
+	.ndo_fix_features    = xennet_fix_features,
+	.ndo_set_features    = xennet_set_features,
 };
 
 static struct net_device * __devinit xennet_create_dev(struct xenbus_device *dev)
@@ -1209,7 +1247,17 @@ static struct net_device * __devinit xennet_create_dev(struct xenbus_device *dev
 	netdev->netdev_ops	= &xennet_netdev_ops;
 
 	netif_napi_add(netdev, &np->napi, xennet_poll, 64);
-	netdev->features        = NETIF_F_IP_CSUM;
+	netdev->features        = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+				  NETIF_F_GSO_ROBUST;
+	netdev->hw_features	= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
+
+	/*
+         * Assume that all hw features are available for now. This set
+         * will be adjusted by the call to netdev_update_features() in
+         * xennet_connect() which is the earliest point where we can
+         * negotiate with the backend regarding supported features.
+         */
+	netdev->features |= netdev->hw_features;
 
 	SET_ETHTOOL_OPS(netdev, &xennet_ethtool_ops);
 	SET_NETDEV_DEV(netdev, &dev->dev);
@@ -1416,8 +1464,7 @@ static int setup_netfront(struct xenbus_device *dev, struct netfront_info *info)
 		goto fail;
 
 	err = bind_evtchn_to_irqhandler(info->evtchn, xennet_interrupt,
-					IRQF_SAMPLE_RANDOM, netdev->name,
-					netdev);
+					0, netdev->name, netdev);
 	if (err < 0)
 		goto fail;
 	netdev->irq = err;
@@ -1510,54 +1557,6 @@ again:
 	return err;
 }
 
-static int xennet_set_sg(struct net_device *dev, u32 data)
-{
-	if (data) {
-		struct netfront_info *np = netdev_priv(dev);
-		int val;
-
-		if (xenbus_scanf(XBT_NIL, np->xbdev->otherend, "feature-sg",
-				 "%d", &val) < 0)
-			val = 0;
-		if (!val)
-			return -ENOSYS;
-	} else if (dev->mtu > ETH_DATA_LEN)
-		dev->mtu = ETH_DATA_LEN;
-
-	return ethtool_op_set_sg(dev, data);
-}
-
-static int xennet_set_tso(struct net_device *dev, u32 data)
-{
-	if (data) {
-		struct netfront_info *np = netdev_priv(dev);
-		int val;
-
-		if (xenbus_scanf(XBT_NIL, np->xbdev->otherend,
-				 "feature-gso-tcpv4", "%d", &val) < 0)
-			val = 0;
-		if (!val)
-			return -ENOSYS;
-	}
-
-	return ethtool_op_set_tso(dev, data);
-}
-
-static void xennet_set_features(struct net_device *dev)
-{
-	/* Turn off all GSO bits except ROBUST. */
-	dev->features &= ~NETIF_F_GSO_MASK;
-	dev->features |= NETIF_F_GSO_ROBUST;
-	xennet_set_sg(dev, 0);
-
-	/* We need checksum offload to enable scatter/gather and TSO. */
-	if (!(dev->features & NETIF_F_IP_CSUM))
-		return;
-
-	if (!xennet_set_sg(dev, 1))
-		xennet_set_tso(dev, 1);
-}
-
 static int xennet_connect(struct net_device *dev)
 {
 	struct netfront_info *np = netdev_priv(dev);
@@ -1582,7 +1581,7 @@ static int xennet_connect(struct net_device *dev)
 	if (err)
 		return err;
 
-	xennet_set_features(dev);
+	netdev_update_features(dev);
 
 	spin_lock_bh(&np->rx_lock);
 	spin_lock_irq(&np->tx_lock);
@@ -1710,9 +1709,6 @@ static void xennet_get_strings(struct net_device *dev, u32 stringset, u8 * data)
 
 static const struct ethtool_ops xennet_ethtool_ops =
 {
-	.set_tx_csum = ethtool_op_set_tx_csum,
-	.set_sg = xennet_set_sg,
-	.set_tso = xennet_set_tso,
 	.get_link = ethtool_op_get_link,
 
 	.get_sset_count = xennet_get_sset_count,
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 2642af4ee49..372572c0adc 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -786,7 +786,7 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
  * @reg:	register number to write to
  * @val:	value to write to the register number specified by reg
  *
- * This fucntion waits till the device is ready to accept a new MDIO
+ * This function waits till the device is ready to accept a new MDIO
  * request and then writes the val to the MDIO Write Data register.
  */
 static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/znet.c b/drivers/net/znet.c
index ae07b3dfbcc..ec2800ff8d4 100644
--- a/drivers/net/znet.c
+++ b/drivers/net/znet.c
@@ -652,7 +652,7 @@ static irqreturn_t znet_interrupt(int irq, void *dev_id)
 					dev->stats.tx_errors++;
 
 				/* Transceiver may be stuck if cable
-				 * was removed while emiting a
+				 * was removed while emitting a
 				 * packet. Flip it off, then on to
 				 * reset it. This is very empirical,
 				 * but it seems to work. */
diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c
index b78a38d9172..8c7c522a056 100644
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/zorro8390.c
@@ -126,7 +126,7 @@ static int __devinit zorro8390_init_one(struct zorro_dev *z,
 
     board = z->resource.start;
     ioaddr = board+cards[i].offset;
-    dev = alloc_ei_netdev();
+    dev = ____alloc_ei_netdev(0);
     if (!dev)
 	return -ENOMEM;
     if (!request_mem_region(ioaddr, NE_IO_EXTENT*2, DRV_NAME)) {
@@ -146,15 +146,15 @@ static int __devinit zorro8390_init_one(struct zorro_dev *z,
 static const struct net_device_ops zorro8390_netdev_ops = {
 	.ndo_open		= zorro8390_open,
 	.ndo_stop		= zorro8390_close,
-	.ndo_start_xmit		= ei_start_xmit,
-	.ndo_tx_timeout		= ei_tx_timeout,
-	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_start_xmit		= __ei_start_xmit,
+	.ndo_tx_timeout		= __ei_tx_timeout,
+	.ndo_get_stats		= __ei_get_stats,
+	.ndo_set_multicast_list = __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= ei_poll,
+	.ndo_poll_controller	= __ei_poll,
 #endif
 };
 
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index c9db49c10f4..8b63a691a9e 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -676,7 +676,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
 
 	early_init_dt_check_for_initrd(node);
 
-	/* Retreive command line */
+	/* Retrieve command line */
 	p = of_get_flat_dt_prop(node, "bootargs", &l);
 	if (p != NULL && l > 0)
 		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 75b0d3cb767..9f689f1da0f 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -56,7 +56,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
  * Returns a pointer to the interrupt parent node, or NULL if the interrupt
  * parent could not be determined.
  */
-static struct device_node *of_irq_find_parent(struct device_node *child)
+struct device_node *of_irq_find_parent(struct device_node *child)
 {
 	struct device_node *p;
 	const __be32 *parp;
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index dcd7857784f..d35e300b0ad 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -136,7 +136,7 @@ EXPORT_SYMBOL(of_phy_find_device);
  * @hndlr: Link state callback for the network device
  * @iface: PHY data interface type
  *
- * Returns a pointer to the phy_device if successfull.  NULL otherwise
+ * Returns a pointer to the phy_device if successful.  NULL otherwise
  */
 struct phy_device *of_phy_connect(struct net_device *dev,
 				  struct device_node *phy_np,
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 1062b8ffe24..246a92f677e 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -141,7 +141,7 @@ struct pdcspath_attribute paths_attr_##_name = { \
  * @entry: A pointer to an allocated pdcspath_entry.
  * 
  * The general idea is that you don't read from the Stable Storage every time
- * you access the files provided by the facilites. We store a copy of the
+ * you access the files provided by the facilities. We store a copy of the
  * content of the stable storage WRT various paths in these structs. We read
  * these structs when reading the files, and we will write to these structs when
  * writing to the files, and only then write them back to the Stable Storage.
@@ -213,7 +213,7 @@ pdcspath_store(struct pdcspath_entry *entry)
 
 	/* addr, devpath and count must be word aligned */
 	if (pdc_stable_write(entry->addr, devpath, sizeof(*devpath)) != PDC_OK) {
-		printk(KERN_ERR "%s: an error occured when writing to PDC.\n"
+		printk(KERN_ERR "%s: an error occurred when writing to PDC.\n"
 				"It is likely that the Stable Storage data has been corrupted.\n"
 				"Please check it carefully upon next reboot.\n", __func__);
 		WARN_ON(1);
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 855f389eea4..d92185a5523 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -142,7 +142,7 @@ config PARPORT_AX88796
 	  the AX88796 network controller chip. This code is also available
 	  as a module (say M), called parport_ax88796.
 
-	  The driver is not dependant on the AX88796 network driver, and
+	  The driver is not dependent on the AX88796 network driver, and
 	  should not interfere with the networking functions of the chip.
 
 config PARPORT_1284
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 8901ecf6e03..f9fd4b33a54 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -355,7 +355,7 @@ int parport_negotiate (struct parport *port, int mode)
 		return 0;
 	}
 
-	/* Go to compability forward idle mode */
+	/* Go to compatibility forward idle mode */
 	if (port->ieee1284.mode != IEEE1284_MODE_COMPAT)
 		parport_ieee1284_terminate (port);
 
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 8d62fb76cd4..bc8ce48f077 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1488,7 +1488,7 @@ static void __devinit winbond_check(int io, int key)
 
 	outb(key, io);
 	outb(key, io);     /* Write Magic Sequence to EFER, extended
-			      funtion enable register */
+			      function enable register */
 	outb(0x20, io);    /* Write EFIR, extended function index register */
 	devid = inb(io + 1);  /* Read EFDR, extended function data register */
 	outb(0x21, io);
@@ -1527,7 +1527,7 @@ static void __devinit winbond_check2(int io, int key)
 	x_oldid = inb(io + 2);
 
 	outb(key, io);     /* Write Magic Byte to EFER, extended
-			      funtion enable register */
+			      function enable register */
 	outb(0x20, io + 2);  /* Write EFIR, extended function index register */
 	devid = inb(io + 2);  /* Read EFDR, extended function data register */
 	outb(0x21, io + 1);
@@ -1569,7 +1569,7 @@ static void __devinit smsc_check(int io, int key)
 
 	outb(key, io);
 	outb(key, io);     /* Write Magic Sequence to EFER, extended
-			      funtion enable register */
+			      function enable register */
 	outb(0x0d, io);    /* Write EFIR, extended function index register */
 	oldid = inb(io + 1);  /* Read EFDR, extended function data register */
 	outb(0x0e, io);
@@ -2550,7 +2550,6 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 					 const struct parport_pc_via_data *via)
 {
 	short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
-	struct resource *base_res;
 	u32 ite8872set;
 	u32 ite8872_lpt, ite8872_lpthi;
 	u8 ite8872_irq, type;
@@ -2561,8 +2560,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 
 	/* make sure which one chip */
 	for (i = 0; i < 5; i++) {
-		base_res = request_region(inta_addr[i], 32, "it887x");
-		if (base_res) {
+		if (request_region(inta_addr[i], 32, "it887x")) {
 			int test;
 			pci_write_config_dword(pdev, 0x60,
 						0xe5000000 | inta_addr[i]);
@@ -2571,7 +2569,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 			test = inb(inta_addr[i]);
 			if (test != 0xff)
 				break;
-			release_region(inta_addr[i], 0x8);
+			release_region(inta_addr[i], 32);
 		}
 	}
 	if (i >= 5) {
@@ -2635,7 +2633,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
 	/*
 	 * Release the resource so that parport_pc_probe_port can get it.
 	 */
-	release_resource(base_res);
+	release_region(inta_addr[i], 32);
 	if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
 				   irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
 		printk(KERN_INFO
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index c8ff646c0b0..0fa466a91bf 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -88,4 +88,6 @@ config PCI_IOAPIC
 	depends on HOTPLUG
 	default y
 
-select NLS if (DMI || ACPI)
+config PCI_LABEL
+	def_bool y if (DMI || ACPI)
+	select NLS
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 98d61c8e984..c85f744270a 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -56,10 +56,10 @@ obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
 # ACPI Related PCI FW Functions
 # ACPI _DSM provided firmware instance and string name
 #
-obj-$(CONFIG_ACPI)    += pci-acpi.o pci-label.o
+obj-$(CONFIG_ACPI)    += pci-acpi.o
 
 # SMBIOS provided firmware instance and labels
-obj-$(CONFIG_DMI)    += pci-label.o
+obj-$(CONFIG_PCI_LABEL) += pci-label.o
 
 # Cardbus & CompactPCI use setup-bus
 obj-$(CONFIG_HOTPLUG) += setup-bus.o
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 3bc72d18b12..8f3faf343f7 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -351,7 +351,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
 	 * To handle different BIOS behavior, we look for _OSC on a root
 	 * bridge preferentially (according to PCI fw spec). Later for
 	 * OSHP within the scope of the hotplug controller and its parents,
-	 * upto the host bridge under which this controller exists.
+	 * up to the host bridge under which this controller exists.
 	 */
 	handle = acpi_find_root_bridge_handle(pdev);
 	if (handle) {
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index e610cfe4f07..2f67e9bc2f9 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -585,7 +585,7 @@ static void remove_bridge(acpi_handle handle)
 
 	/*
 	 * On root bridges with hotplug slots directly underneath (ie,
-	 * no p2p bridge inbetween), we call cleanup_bridge(). 
+	 * no p2p bridge between), we call cleanup_bridge(). 
 	 *
 	 * The else clause cleans up root bridges that either had no
 	 * hotplug slots at all, or had a p2p bridge underneath.
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index ef7411c660b..758adb5f47f 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -290,7 +290,7 @@ static int is_php_dn(struct device_node *dn, const int **indexes,
  * @dn: device node of slot
  *
  * This subroutine will register a hotplugable slot with the
- * PCI hotplug infrastructure. This routine is typicaly called
+ * PCI hotplug infrastructure. This routine is typically called
  * during boot time, if the hotplug slots are present at boot time,
  * or is called later, by the dlpar add code, if the slot is
  * being dynamically added during runtime.
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 7da3bef60d8..6af6b628175 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,6 +39,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/tboot.h>
 #include <linux/dmi.h>
+#include <linux/pci-ats.h>
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
 #include "pci.h"
@@ -1299,7 +1300,7 @@ static void iommu_detach_domain(struct dmar_domain *domain,
 static struct iova_domain reserved_iova_list;
 static struct lock_class_key reserved_rbtree_key;
 
-static void dmar_init_reserved_ranges(void)
+static int dmar_init_reserved_ranges(void)
 {
 	struct pci_dev *pdev = NULL;
 	struct iova *iova;
@@ -1313,8 +1314,10 @@ static void dmar_init_reserved_ranges(void)
 	/* IOAPIC ranges shouldn't be accessed by DMA */
 	iova = reserve_iova(&reserved_iova_list, IOVA_PFN(IOAPIC_RANGE_START),
 		IOVA_PFN(IOAPIC_RANGE_END));
-	if (!iova)
+	if (!iova) {
 		printk(KERN_ERR "Reserve IOAPIC range failed\n");
+		return -ENODEV;
+	}
 
 	/* Reserve all PCI MMIO to avoid peer-to-peer access */
 	for_each_pci_dev(pdev) {
@@ -1327,11 +1330,13 @@ static void dmar_init_reserved_ranges(void)
 			iova = reserve_iova(&reserved_iova_list,
 					    IOVA_PFN(r->start),
 					    IOVA_PFN(r->end));
-			if (!iova)
+			if (!iova) {
 				printk(KERN_ERR "Reserve iova failed\n");
+				return -ENODEV;
+			}
 		}
 	}
-
+	return 0;
 }
 
 static void domain_reserve_special_ranges(struct dmar_domain *domain)
@@ -1835,7 +1840,7 @@ static struct dmar_domain *get_domain_for_dev(struct pci_dev *pdev, int gaw)
 
 	ret = iommu_attach_domain(domain, iommu);
 	if (ret) {
-		domain_exit(domain);
+		free_domain_mem(domain);
 		goto error;
 	}
 
@@ -2213,7 +2218,7 @@ static int __init iommu_prepare_static_identity_mapping(int hw)
 	return 0;
 }
 
-int __init init_dmars(void)
+static int __init init_dmars(int force_on)
 {
 	struct dmar_drhd_unit *drhd;
 	struct dmar_rmrr_unit *rmrr;
@@ -2265,7 +2270,7 @@ int __init init_dmars(void)
 		/*
 		 * TBD:
 		 * we could share the same root & context tables
-		 * amoung all IOMMU's. Need to Split it later.
+		 * among all IOMMU's. Need to Split it later.
 		 */
 		ret = iommu_alloc_root_entry(iommu);
 		if (ret) {
@@ -2393,8 +2398,15 @@ int __init init_dmars(void)
 	 *   enable translation
 	 */
 	for_each_drhd_unit(drhd) {
-		if (drhd->ignored)
+		if (drhd->ignored) {
+			/*
+			 * we always have to disable PMRs or DMA may fail on
+			 * this device
+			 */
+			if (force_on)
+				iommu_disable_protect_mem_regions(drhd->iommu);
 			continue;
+		}
 		iommu = drhd->iommu;
 
 		iommu_flush_write_buffer(iommu);
@@ -3240,9 +3252,15 @@ static int device_notifier(struct notifier_block *nb,
 	if (!domain)
 		return 0;
 
-	if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through)
+	if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through) {
 		domain_remove_one_dev_info(domain, pdev);
 
+		if (!(domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE) &&
+		    !(domain->flags & DOMAIN_FLAG_STATIC_IDENTITY) &&
+		    list_empty(&domain->devices))
+			domain_exit(domain);
+	}
+
 	return 0;
 }
 
@@ -3277,12 +3295,21 @@ int __init intel_iommu_init(void)
 	if (no_iommu || dmar_disabled)
 		return -ENODEV;
 
-	iommu_init_mempool();
-	dmar_init_reserved_ranges();
+	if (iommu_init_mempool()) {
+		if (force_on)
+			panic("tboot: Failed to initialize iommu memory\n");
+		return 	-ENODEV;
+	}
+
+	if (dmar_init_reserved_ranges()) {
+		if (force_on)
+			panic("tboot: Failed to reserve iommu ranges\n");
+		return 	-ENODEV;
+	}
 
 	init_no_remapping_devices();
 
-	ret = init_dmars();
+	ret = init_dmars(force_on);
 	if (ret) {
 		if (force_on)
 			panic("tboot: Failed to initialize DMARs\n");
@@ -3391,6 +3418,11 @@ static void domain_remove_one_dev_info(struct dmar_domain *domain,
 		domain->iommu_count--;
 		domain_update_iommu_cap(domain);
 		spin_unlock_irqrestore(&domain->iommu_lock, tmp_flags);
+
+		spin_lock_irqsave(&iommu->lock, tmp_flags);
+		clear_bit(domain->id, iommu->domain_ids);
+		iommu->domains[domain->id] = NULL;
+		spin_unlock_irqrestore(&iommu->lock, tmp_flags);
 	}
 
 	spin_unlock_irqrestore(&device_domain_lock, flags);
@@ -3607,9 +3639,9 @@ static int intel_iommu_attach_device(struct iommu_domain *domain,
 
 		pte = dmar_domain->pgd;
 		if (dma_pte_present(pte)) {
-			free_pgtable_page(dmar_domain->pgd);
 			dmar_domain->pgd = (struct dma_pte *)
 				phys_to_virt(dma_pte_addr(pte));
+			free_pgtable_page(pte);
 		}
 		dmar_domain->agaw--;
 	}
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index a22557b2028..3607faf28a4 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -289,7 +289,7 @@ int free_irte(int irq)
  * source validation type
  */
 #define SVT_NO_VERIFY		0x0  /* no verification is required */
-#define SVT_VERIFY_SID_SQ	0x1  /* verify using SID and SQ fiels */
+#define SVT_VERIFY_SID_SQ	0x1  /* verify using SID and SQ fields */
 #define SVT_VERIFY_BUS		0x2  /* verify bus of request-id */
 
 /*
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 553d8ee55c1..42fae477651 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -13,6 +13,7 @@
 #include <linux/mutex.h>
 #include <linux/string.h>
 #include <linux/delay.h>
+#include <linux/pci-ats.h>
 #include "pci.h"
 
 #define VIRTFN_ID_LEN	16
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 7914951ef29..9606e599a47 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -391,7 +391,7 @@ reserve_iova(struct iova_domain *iovad,
 				break;
 	}
 
-	/* We are here either becasue this is the first reserver node
+	/* We are here either because this is the first reserver node
 	 * or need to insert remaining non overlap addr range
 	 */
 	iova = __insert_new_range(iovad, pfn_lo, pfn_hi);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index d86ea8b0113..135df164a4c 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -781,7 +781,7 @@ static int pci_pm_resume(struct device *dev)
 
 #endif /* !CONFIG_SUSPEND */
 
-#ifdef CONFIG_HIBERNATION
+#ifdef CONFIG_HIBERNATE_CALLBACKS
 
 static int pci_pm_freeze(struct device *dev)
 {
@@ -970,7 +970,7 @@ static int pci_pm_restore(struct device *dev)
 	return error;
 }
 
-#else /* !CONFIG_HIBERNATION */
+#else /* !CONFIG_HIBERNATE_CALLBACKS */
 
 #define pci_pm_freeze		NULL
 #define pci_pm_freeze_noirq	NULL
@@ -981,7 +981,7 @@ static int pci_pm_restore(struct device *dev)
 #define pci_pm_restore		NULL
 #define pci_pm_restore_noirq	NULL
 
-#endif /* !CONFIG_HIBERNATION */
+#endif /* !CONFIG_HIBERNATE_CALLBACKS */
 
 #ifdef CONFIG_PM_RUNTIME
 
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index a8a277a2e0d..f8deb3e380a 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -645,7 +645,7 @@ pci_adjust_legacy_attr(struct pci_bus *b, enum pci_mmap_state mmap_type)
  * a per-bus basis.  This routine creates the files and ties them into
  * their associated read, write and mmap files from pci-sysfs.c
  *
- * On error unwind, but don't propogate the error to the caller
+ * On error unwind, but don't propagate the error to the caller
  * as it is ok to set up the PCI bus without these files.
  */
 void pci_create_legacy_files(struct pci_bus *b)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a6ec200fe5e..4020025f854 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -250,15 +250,6 @@ struct pci_sriov {
 	u8 __iomem *mstate;	/* VF Migration State Array */
 };
 
-/* Address Translation Service */
-struct pci_ats {
-	int pos;	/* capability position */
-	int stu;	/* Smallest Translation Unit */
-	int qdep;	/* Invalidate Queue Depth */
-	int ref_cnt;	/* Physical Function reference count */
-	unsigned int is_enabled:1;	/* Enable bit is set */
-};
-
 #ifdef CONFIG_PCI_IOV
 extern int pci_iov_init(struct pci_dev *dev);
 extern void pci_iov_release(struct pci_dev *dev);
@@ -269,19 +260,6 @@ extern resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev,
 extern void pci_restore_iov_state(struct pci_dev *dev);
 extern int pci_iov_bus_range(struct pci_bus *bus);
 
-extern int pci_enable_ats(struct pci_dev *dev, int ps);
-extern void pci_disable_ats(struct pci_dev *dev);
-extern int pci_ats_queue_depth(struct pci_dev *dev);
-/**
- * pci_ats_enabled - query the ATS status
- * @dev: the PCI device
- *
- * Returns 1 if ATS capability is enabled, or 0 if not.
- */
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return dev->ats && dev->ats->is_enabled;
-}
 #else
 static inline int pci_iov_init(struct pci_dev *dev)
 {
@@ -304,21 +282,6 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
 	return 0;
 }
 
-static inline int pci_enable_ats(struct pci_dev *dev, int ps)
-{
-	return -ENODEV;
-}
-static inline void pci_disable_ats(struct pci_dev *dev)
-{
-}
-static inline int pci_ats_queue_depth(struct pci_dev *dev)
-{
-	return -ENODEV;
-}
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return 0;
-}
 #endif /* CONFIG_PCI_IOV */
 
 static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bd80f637846..5129ed6d8fa 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -263,7 +263,7 @@ static void quirk_vialatency(struct pci_dev *dev)
 	 *	This happens to include the IDE controllers....
 	 *
 	 *	VIA only apply this fix when an SB Live! is present but under
-	 *	both Linux and Windows this isnt enough, and we have seen
+	 *	both Linux and Windows this isn't enough, and we have seen
 	 *	corruption without SB Live! but with things like 3 UDMA IDE
 	 *	controllers. So we ignore that bit of the VIA recommendation..
 	 */
@@ -2680,7 +2680,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
  * This is a quirk for the Ricoh MMC controller found as a part of
  * some mulifunction chips.
 
- * This is very similiar and based on the ricoh_mmc driver written by
+ * This is very similar and based on the ricoh_mmc driver written by
  * Philip Langdale. Thank you for these magic sequences.
  *
  * These chips implement the four main memory card controllers (SD, MMC, MS, xD)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 89d0a6a88df..a806cb321d2 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -579,7 +579,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
 	}
 	size0 = calculate_iosize(size, min_size, size1,
 			resource_size(b_res), 4096);
-	size1 = !add_size? size0:
+	size1 = (!add_head || (add_head && !add_size)) ? size0 :
 		calculate_iosize(size, min_size+add_size, size1,
 			resource_size(b_res), 4096);
 	if (!size0 && !size1) {
@@ -676,10 +676,10 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			min_align = align1 >> 1;
 		align += aligns[order];
 	}
-	size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), align);
-	size1 = !add_size ? size :
+	size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
+	size1 = (!add_head || (add_head && !add_size)) ? size0 :
 		calculate_memsize(size, min_size+add_size, 0,
-				resource_size(b_res), align);
+				resource_size(b_res), min_align);
 	if (!size0 && !size1) {
 		if (b_res->start || b_res->end)
 			dev_info(&bus->self->dev, "disabling bridge window "
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index fc7906eaf22..3e447d0387b 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -54,7 +54,7 @@ static struct pccard_operations i82092aa_operations = {
 	.set_mem_map		= i82092aa_set_mem_map,
 };
 
-/* The card can do upto 4 sockets, allocate a structure for each of them */
+/* The card can do up to 4 sockets, allocate a structure for each of them */
 
 struct socket_info {
 	int	number;
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 42fbf1a7557..e8c19def1b0 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -173,7 +173,7 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev,
 	c = p_dev->function_config;
 
 	if (!(c->state & CONFIG_LOCKED)) {
-		dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
+		dev_dbg(&p_dev->dev, "Configuration isn't locked\n");
 		mutex_unlock(&s->ops_mutex);
 		return -EACCES;
 	}
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
index 453c54c9761..4c3e94c0ae8 100644
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -25,6 +25,8 @@
 
 #include <mach/balloon3.h>
 
+#include <asm/mach-types.h>
+
 #include "soc_common.h"
 
 /*
@@ -127,6 +129,9 @@ static int __init balloon3_pcmcia_init(void)
 {
 	int ret;
 
+	if (!machine_is_balloon3())
+		return -ENODEV;
+
 	balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
 	if (!balloon3_pcmcia_device)
 		return -ENOMEM;
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
index a52039564e7..443cb7fc872 100644
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -34,14 +34,24 @@
 #define	COLIBRI320_DETECT_GPIO	81
 #define	COLIBRI320_READY_GPIO	29
 
-static struct {
-	int	reset_gpio;
-	int	ppen_gpio;
-	int	bvd1_gpio;
-	int	bvd2_gpio;
-	int	detect_gpio;
-	int	ready_gpio;
-} colibri_pcmcia_gpio;
+enum {
+	DETECT = 0,
+	READY = 1,
+	BVD1 = 2,
+	BVD2 = 3,
+	PPEN = 4,
+	RESET = 5,
+};
+
+/* Contents of this array are configured on-the-fly in init function */
+static struct gpio colibri_pcmcia_gpios[] = {
+	{ 0,	GPIOF_IN,	"PCMCIA Detect" },
+	{ 0,	GPIOF_IN,	"PCMCIA Ready" },
+	{ 0,	GPIOF_IN,	"PCMCIA BVD1" },
+	{ 0,	GPIOF_IN,	"PCMCIA BVD2" },
+	{ 0,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
+	{ 0,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+};
 
 static struct pcmcia_irqs colibri_irqs[] = {
 	{
@@ -54,88 +64,42 @@ static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
+	ret = gpio_request_array(colibri_pcmcia_gpios,
+				ARRAY_SIZE(colibri_pcmcia_gpios));
 	if (ret)
 		goto err1;
-	ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
-	if (ret)
-		goto err3;
 
-	ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
-	if (ret)
-		goto err3;
-	ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
-	if (ret)
-		goto err4;
+	colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
+	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
 
-	ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
-	if (ret)
-		goto err4;
-	ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
-	if (ret)
-		goto err5;
-
-	ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
-	if (ret)
-		goto err5;
-	ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
-	if (ret)
-		goto err6;
-
-	ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
-	if (ret)
-		goto err6;
-	ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
+	ret = soc_pcmcia_request_irqs(skt, colibri_irqs,
+					ARRAY_SIZE(colibri_irqs));
 	if (ret)
-		goto err7;
-
-	colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
-	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
+		goto err2;
 
-	return soc_pcmcia_request_irqs(skt, colibri_irqs,
-					ARRAY_SIZE(colibri_irqs));
+	return ret;
 
-err7:
-	gpio_free(colibri_pcmcia_gpio.detect_gpio);
-err6:
-	gpio_free(colibri_pcmcia_gpio.ready_gpio);
-err5:
-	gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
-err4:
-	gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
-err3:
-	gpio_free(colibri_pcmcia_gpio.reset_gpio);
 err2:
-	gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+	gpio_free_array(colibri_pcmcia_gpios,
+			ARRAY_SIZE(colibri_pcmcia_gpios));
 err1:
 	return ret;
 }
 
 static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(colibri_pcmcia_gpio.detect_gpio);
-	gpio_free(colibri_pcmcia_gpio.ready_gpio);
-	gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
-	gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
-	gpio_free(colibri_pcmcia_gpio.reset_gpio);
-	gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+	gpio_free_array(colibri_pcmcia_gpios,
+			ARRAY_SIZE(colibri_pcmcia_gpios));
 }
 
 static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 					struct pcmcia_state *state)
 {
 
-	state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
-	state->ready  = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
-	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
-	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
+	state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
+	state->ready  = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
+	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
+	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
 	state->wrprot = 0;
 	state->vs_3v  = 1;
 	state->vs_Xv  = 0;
@@ -145,9 +109,10 @@ static int
 colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				const socket_state_t *state)
 {
-	gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
+	gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
 			!(state->Vcc == 33 && state->Vpp < 50));
-	gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET);
+	gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
+			state->flags & SS_RESET);
 	return 0;
 }
 
@@ -190,20 +155,20 @@ static int __init colibri_pcmcia_init(void)
 
 	/* Colibri PXA270 */
 	if (machine_is_colibri()) {
-		colibri_pcmcia_gpio.reset_gpio	= COLIBRI270_RESET_GPIO;
-		colibri_pcmcia_gpio.ppen_gpio	= COLIBRI270_PPEN_GPIO;
-		colibri_pcmcia_gpio.bvd1_gpio	= COLIBRI270_BVD1_GPIO;
-		colibri_pcmcia_gpio.bvd2_gpio	= COLIBRI270_BVD2_GPIO;
-		colibri_pcmcia_gpio.detect_gpio	= COLIBRI270_DETECT_GPIO;
-		colibri_pcmcia_gpio.ready_gpio	= COLIBRI270_READY_GPIO;
+		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI270_RESET_GPIO;
+		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI270_PPEN_GPIO;
+		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI270_BVD1_GPIO;
+		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI270_BVD2_GPIO;
+		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI270_DETECT_GPIO;
+		colibri_pcmcia_gpios[READY].gpio	= COLIBRI270_READY_GPIO;
 	/* Colibri PXA320 */
 	} else if (machine_is_colibri320()) {
-		colibri_pcmcia_gpio.reset_gpio	= COLIBRI320_RESET_GPIO;
-		colibri_pcmcia_gpio.ppen_gpio	= COLIBRI320_PPEN_GPIO;
-		colibri_pcmcia_gpio.bvd1_gpio	= COLIBRI320_BVD1_GPIO;
-		colibri_pcmcia_gpio.bvd2_gpio	= COLIBRI320_BVD2_GPIO;
-		colibri_pcmcia_gpio.detect_gpio	= COLIBRI320_DETECT_GPIO;
-		colibri_pcmcia_gpio.ready_gpio	= COLIBRI320_READY_GPIO;
+		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI320_RESET_GPIO;
+		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI320_PPEN_GPIO;
+		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI320_BVD1_GPIO;
+		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI320_BVD2_GPIO;
+		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI320_DETECT_GPIO;
+		colibri_pcmcia_gpios[READY].gpio	= COLIBRI320_READY_GPIO;
 	}
 
 	ret = platform_device_add_data(colibri_pcmcia_device,
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 25afe637c65..c21888eebb5 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -187,7 +187,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 			 * We need to hack around the const qualifier as
 			 * well to keep this ugly workaround localized and
 			 * not force it to the rest of the code. Barf bags
-			 * avaliable in the seat pocket in front of you!
+			 * available in the seat pocket in front of you!
 			 */
 			((socket_state_t *)state)->Vcc = 50;
 			((socket_state_t *)state)->Vpp = 50;
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index 6fb6f7f0672..69f73670949 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -4,7 +4,7 @@
  * Driver for Palm LifeDrive PCMCIA
  *
  * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,49 +20,27 @@
 #include <mach/palmld.h>
 #include "soc_common.h"
 
+static struct gpio palmld_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMLD_PCMCIA_POWER,	GPIOF_INIT_LOW,	"PCMCIA Power" },
+	{ GPIO_NR_PALMLD_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+	{ GPIO_NR_PALMLD_PCMCIA_READY,	GPIOF_IN,	"PCMCIA Ready" },
+};
+
 static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1);
-	if (ret)
-		goto err3;
-
-	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY");
-	if (ret)
-		goto err3;
-	ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY);
-	if (ret)
-		goto err4;
+	ret = gpio_request_array(palmld_pcmcia_gpios,
+				ARRAY_SIZE(palmld_pcmcia_gpios));
 
 	skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
-	return 0;
 
-err4:
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
-err3:
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
-err2:
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
-err1:
 	return ret;
 }
 
 static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
-	gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+	gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
 }
 
 static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index 459a232d66b..d0ad6a76bbd 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -4,7 +4,7 @@
  * Driver for Palm Tungsten|C PCMCIA
  *
  * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,79 +21,30 @@
 #include <mach/palmtc.h>
 #include "soc_common.h"
 
+static struct gpio palmtc_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMTC_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
+	{ GPIO_NR_PALMTC_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
+	{ GPIO_NR_PALMTC_PCMCIA_POWER3,	GPIOF_INIT_LOW,	"PCMCIA Power 3" },
+	{ GPIO_NR_PALMTC_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+	{ GPIO_NR_PALMTC_PCMCIA_READY,	GPIOF_IN,	"PCMCIA Ready" },
+	{ GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN,	"PCMCIA Power Ready" },
+};
+
 static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
-	if (ret)
-		goto err3;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3");
-	if (ret)
-		goto err3;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
-	if (ret)
-		goto err4;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST");
-	if (ret)
-		goto err4;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	if (ret)
-		goto err5;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY");
-	if (ret)
-		goto err5;
-	ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY);
-	if (ret)
-		goto err6;
-
-	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY");
-	if (ret)
-		goto err6;
-	ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
-	if (ret)
-		goto err7;
+	ret = gpio_request_array(palmtc_pcmcia_gpios,
+				ARRAY_SIZE(palmtc_pcmcia_gpios));
 
 	skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
-	return 0;
 
-err7:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
-err6:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
-err5:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
-err4:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
-err3:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
-err2:
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
-err1:
 	return ret;
 }
 
 static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
-	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+	gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
 }
 
 static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index b07b247a399..1a258045040 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -3,7 +3,7 @@
  *
  * Driver for Palm T|X PCMCIA
  *
- * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,67 +13,34 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
-#include <mach/gpio.h>
 #include <mach/palmtx.h>
-
 #include "soc_common.h"
 
+static struct gpio palmtx_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMTX_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
+	{ GPIO_NR_PALMTX_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
+	{ GPIO_NR_PALMTX_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+	{ GPIO_NR_PALMTX_PCMCIA_READY,	GPIOF_IN,	"PCMCIA Ready" },
+};
+
 static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
-	if (ret)
-		goto err3;
-
-	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
-	if (ret)
-		goto err3;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
-	if (ret)
-		goto err4;
-
-	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
-	if (ret)
-		goto err4;
-	ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
-	if (ret)
-		goto err5;
+	ret = gpio_request_array(palmtx_pcmcia_gpios,
+				ARRAY_SIZE(palmtx_pcmcia_gpios));
 
 	skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
-	return 0;
 
-err5:
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
-err4:
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
-err3:
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
-err2:
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
-err1:
 	return ret;
 }
 
 static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
-	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+	gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
 }
 
 static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
index b7e596620db..b829e655457 100644
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -69,15 +69,15 @@ static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 	for (i = 0; i < ARRAY_SIZE(irqs); i++) {
 		if (irqs[i].sock != skt->nr)
 			continue;
-		if (gpio_request(IRQ_TO_GPIO(irqs[i].irq), irqs[i].str) < 0) {
+		if (gpio_request(irq_to_gpio(irqs[i].irq), irqs[i].str) < 0) {
 			pr_err("%s: sock %d unable to request gpio %d\n",
-				__func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq));
+				__func__, skt->nr, irq_to_gpio(irqs[i].irq));
 			ret = -EBUSY;
 			goto error;
 		}
-		if (gpio_direction_input(IRQ_TO_GPIO(irqs[i].irq)) < 0) {
+		if (gpio_direction_input(irq_to_gpio(irqs[i].irq)) < 0) {
 			pr_err("%s: sock %d unable to set input gpio %d\n",
-				__func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq));
+				__func__, skt->nr, irq_to_gpio(irqs[i].irq));
 			ret = -EINVAL;
 			goto error;
 		}
@@ -86,7 +86,7 @@ static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 
 error:
 	for (; i >= 0; i--) {
-		gpio_free(IRQ_TO_GPIO(irqs[i].irq));
+		gpio_free(irq_to_gpio(irqs[i].irq));
 	}
 	return (ret);
 }
@@ -97,7 +97,7 @@ static void trizeps_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 	/* free allocated gpio's */
 	gpio_free(GPIO_PRDY);
 	for (i = 0; i < ARRAY_SIZE(irqs); i++)
-		gpio_free(IRQ_TO_GPIO(irqs[i].irq));
+		gpio_free(irq_to_gpio(irqs[i].irq));
 }
 
 static unsigned long trizeps_pcmcia_status[2];
@@ -226,6 +226,9 @@ static int __init trizeps_pcmcia_init(void)
 {
 	int ret;
 
+	if (!machine_is_trizeps4() && !machine_is_trizeps4wl())
+		return -ENODEV;
+
 	trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
 	if (!trizeps_pcmcia_device)
 		return -ENOMEM;
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index 55627eccee8..435002dfc3c 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -3,8 +3,7 @@
  *
  * Driver for Voipac PXA270 PCMCIA and CF sockets
  *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -22,6 +21,19 @@
 
 #include "soc_common.h"
 
+static struct gpio vpac270_pcmcia_gpios[] = {
+	{ GPIO84_VPAC270_PCMCIA_CD,	GPIOF_IN,	"PCMCIA Card Detect" },
+	{ GPIO35_VPAC270_PCMCIA_RDY,	GPIOF_IN,	"PCMCIA Ready" },
+	{ GPIO107_VPAC270_PCMCIA_PPEN,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
+	{ GPIO11_VPAC270_PCMCIA_RESET,	GPIOF_INIT_LOW,	"PCMCIA Reset" },
+};
+
+static struct gpio vpac270_cf_gpios[] = {
+	{ GPIO17_VPAC270_CF_CD,		GPIOF_IN,	"CF Card Detect" },
+	{ GPIO12_VPAC270_CF_RDY,	GPIOF_IN,	"CF Ready" },
+	{ GPIO16_VPAC270_CF_RESET,	GPIOF_INIT_LOW,	"CF Reset" },
+};
+
 static struct pcmcia_irqs cd_irqs[] = {
 	{
 		.sock = 0,
@@ -40,96 +52,34 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 	int ret;
 
 	if (skt->nr == 0) {
-		ret = gpio_request(GPIO84_VPAC270_PCMCIA_CD, "PCMCIA CD");
-		if (ret)
-			goto err1;
-		ret = gpio_direction_input(GPIO84_VPAC270_PCMCIA_CD);
-		if (ret)
-			goto err2;
-
-		ret = gpio_request(GPIO35_VPAC270_PCMCIA_RDY, "PCMCIA RDY");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_input(GPIO35_VPAC270_PCMCIA_RDY);
-		if (ret)
-			goto err3;
-
-		ret = gpio_request(GPIO107_VPAC270_PCMCIA_PPEN, "PCMCIA PPEN");
-		if (ret)
-			goto err3;
-		ret = gpio_direction_output(GPIO107_VPAC270_PCMCIA_PPEN, 0);
-		if (ret)
-			goto err4;
-
-		ret = gpio_request(GPIO11_VPAC270_PCMCIA_RESET, "PCMCIA RESET");
-		if (ret)
-			goto err4;
-		ret = gpio_direction_output(GPIO11_VPAC270_PCMCIA_RESET, 0);
-		if (ret)
-			goto err5;
+		ret = gpio_request_array(vpac270_pcmcia_gpios,
+				ARRAY_SIZE(vpac270_pcmcia_gpios));
 
 		skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY);
 
-		return soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
-
-err5:
-		gpio_free(GPIO11_VPAC270_PCMCIA_RESET);
-err4:
-		gpio_free(GPIO107_VPAC270_PCMCIA_PPEN);
-err3:
-		gpio_free(GPIO35_VPAC270_PCMCIA_RDY);
-err2:
-		gpio_free(GPIO84_VPAC270_PCMCIA_CD);
-err1:
-		return ret;
-
+		if (!ret)
+			ret = soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
 	} else {
-		ret = gpio_request(GPIO17_VPAC270_CF_CD, "CF CD");
-		if (ret)
-			goto err6;
-		ret = gpio_direction_input(GPIO17_VPAC270_CF_CD);
-		if (ret)
-			goto err7;
-
-		ret = gpio_request(GPIO12_VPAC270_CF_RDY, "CF RDY");
-		if (ret)
-			goto err7;
-		ret = gpio_direction_input(GPIO12_VPAC270_CF_RDY);
-		if (ret)
-			goto err8;
-
-		ret = gpio_request(GPIO16_VPAC270_CF_RESET, "CF RESET");
-		if (ret)
-			goto err8;
-		ret = gpio_direction_output(GPIO16_VPAC270_CF_RESET, 0);
-		if (ret)
-			goto err9;
+		ret = gpio_request_array(vpac270_cf_gpios,
+				ARRAY_SIZE(vpac270_cf_gpios));
 
 		skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY);
 
-		return soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
-
-err9:
-		gpio_free(GPIO16_VPAC270_CF_RESET);
-err8:
-		gpio_free(GPIO12_VPAC270_CF_RDY);
-err7:
-		gpio_free(GPIO17_VPAC270_CF_CD);
-err6:
-		return ret;
-
+		if (!ret)
+			ret = soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
 	}
+
+	return ret;
 }
 
 static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	gpio_free(GPIO11_VPAC270_PCMCIA_RESET);
-	gpio_free(GPIO107_VPAC270_PCMCIA_PPEN);
-	gpio_free(GPIO35_VPAC270_PCMCIA_RDY);
-	gpio_free(GPIO84_VPAC270_PCMCIA_CD);
-	gpio_free(GPIO16_VPAC270_CF_RESET);
-	gpio_free(GPIO12_VPAC270_CF_RDY);
-	gpio_free(GPIO17_VPAC270_CF_CD);
+	if (skt->nr == 0)
+		gpio_request_array(vpac270_pcmcia_gpios,
+					ARRAY_SIZE(vpac270_pcmcia_gpios));
+	else
+		gpio_request_array(vpac270_cf_gpios,
+					ARRAY_SIZE(vpac270_cf_gpios));
 }
 
 static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index 9ffa97d0b16..a71789486cd 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -691,7 +691,7 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
 		/*
 		 * those are either single or dual slot CB with additional functions
 		 * like 1394, smartcard reader, etc. check the TIEALL flag for them
-		 * the TIEALL flag binds the IRQ of all functions toghether.
+		 * the TIEALL flag binds the IRQ of all functions together.
 		 * we catch the single slot variants later.
 		 */
 		sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 2ee442c2a5d..0485e394712 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -187,7 +187,8 @@ config MSI_LAPTOP
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
-	depends on SERIO_I8042
+	depends on INPUT && SERIO_I8042
+	select INPUT_SPARSEKMAP
 	---help---
 	  This is a driver for laptops built by MSI (MICRO-STAR
 	  INTERNATIONAL):
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 5ea6c3477d1..ac4e7f83ce6 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -89,7 +89,7 @@ MODULE_LICENSE("GPL");
 #define ACERWMID_EVENT_GUID "676AA15E-6A47-4D9F-A2CC-1E6D18D14026"
 
 MODULE_ALIAS("wmi:67C3371D-95A3-4C37-BB61-DD47B491DAAB");
-MODULE_ALIAS("wmi:6AF4F258-B401-42Fd-BE91-3D4AC2D7C0D3");
+MODULE_ALIAS("wmi:6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3");
 MODULE_ALIAS("wmi:676AA15E-6A47-4D9F-A2CC-1E6D18D14026");
 
 enum acer_wmi_event_ids {
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index efc776cb0c6..832a3fd7c1c 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -201,8 +201,8 @@ static int asus_wmi_input_init(struct asus_wmi *asus)
 	if (!asus->inputdev)
 		return -ENOMEM;
 
-	asus->inputdev->name = asus->driver->input_phys;
-	asus->inputdev->phys = asus->driver->input_name;
+	asus->inputdev->name = asus->driver->input_name;
+	asus->inputdev->phys = asus->driver->input_phys;
 	asus->inputdev->id.bustype = BUS_HOST;
 	asus->inputdev->dev.parent = &asus->platform_device->dev;
 
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 5f2dd386152..2c1abf63957 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -585,8 +585,9 @@ static bool eeepc_wlan_rfkill_blocked(struct eeepc_laptop *eeepc)
 	return true;
 }
 
-static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
+static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
 {
+	struct pci_dev *port;
 	struct pci_dev *dev;
 	struct pci_bus *bus;
 	bool blocked = eeepc_wlan_rfkill_blocked(eeepc);
@@ -599,9 +600,16 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
 	mutex_lock(&eeepc->hotplug_lock);
 
 	if (eeepc->hotplug_slot) {
-		bus = pci_find_bus(0, 1);
+		port = acpi_get_pci_dev(handle);
+		if (!port) {
+			pr_warning("Unable to find port\n");
+			goto out_unlock;
+		}
+
+		bus = port->subordinate;
+
 		if (!bus) {
-			pr_warning("Unable to find PCI bus 1?\n");
+			pr_warning("Unable to find PCI bus?\n");
 			goto out_unlock;
 		}
 
@@ -609,6 +617,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
 			pr_err("Unable to read PCI config space?\n");
 			goto out_unlock;
 		}
+
 		absent = (l == 0xffffffff);
 
 		if (blocked != absent) {
@@ -647,6 +656,17 @@ out_unlock:
 	mutex_unlock(&eeepc->hotplug_lock);
 }
 
+static void eeepc_rfkill_hotplug_update(struct eeepc_laptop *eeepc, char *node)
+{
+	acpi_status status = AE_OK;
+	acpi_handle handle;
+
+	status = acpi_get_handle(NULL, node, &handle);
+
+	if (ACPI_SUCCESS(status))
+		eeepc_rfkill_hotplug(eeepc, handle);
+}
+
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct eeepc_laptop *eeepc = data;
@@ -654,7 +674,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 	if (event != ACPI_NOTIFY_BUS_CHECK)
 		return;
 
-	eeepc_rfkill_hotplug(eeepc);
+	eeepc_rfkill_hotplug(eeepc, handle);
 }
 
 static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc,
@@ -672,6 +692,11 @@ static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc,
 						     eeepc);
 		if (ACPI_FAILURE(status))
 			pr_warning("Failed to register notify on %s\n", node);
+		/*
+		 * Refresh pci hotplug in case the rfkill state was
+		 * changed during setup.
+		 */
+		eeepc_rfkill_hotplug(eeepc, handle);
 	} else
 		return -ENODEV;
 
@@ -693,6 +718,12 @@ static void eeepc_unregister_rfkill_notifier(struct eeepc_laptop *eeepc,
 		if (ACPI_FAILURE(status))
 			pr_err("Error removing rfkill notify handler %s\n",
 				node);
+			/*
+			 * Refresh pci hotplug in case the rfkill
+			 * state was changed after
+			 * eeepc_unregister_rfkill_notifier()
+			 */
+		eeepc_rfkill_hotplug(eeepc, handle);
 	}
 }
 
@@ -816,11 +847,7 @@ static void eeepc_rfkill_exit(struct eeepc_laptop *eeepc)
 		rfkill_destroy(eeepc->wlan_rfkill);
 		eeepc->wlan_rfkill = NULL;
 	}
-	/*
-	 * Refresh pci hotplug in case the rfkill state was changed after
-	 * eeepc_unregister_rfkill_notifier()
-	 */
-	eeepc_rfkill_hotplug(eeepc);
+
 	if (eeepc->hotplug_slot)
 		pci_hp_deregister(eeepc->hotplug_slot);
 
@@ -889,11 +916,6 @@ static int eeepc_rfkill_init(struct eeepc_laptop *eeepc)
 	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P5");
 	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P6");
 	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P7");
-	/*
-	 * Refresh pci hotplug in case the rfkill state was changed during
-	 * setup.
-	 */
-	eeepc_rfkill_hotplug(eeepc);
 
 exit:
 	if (result && result != -ENODEV)
@@ -928,8 +950,11 @@ static int eeepc_hotk_restore(struct device *device)
 	struct eeepc_laptop *eeepc = dev_get_drvdata(device);
 
 	/* Refresh both wlan rfkill state and pci hotplug */
-	if (eeepc->wlan_rfkill)
-		eeepc_rfkill_hotplug(eeepc);
+	if (eeepc->wlan_rfkill) {
+		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P5");
+		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P6");
+		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P7");
+	}
 
 	if (eeepc->bluetooth_rfkill)
 		rfkill_set_sw_state(eeepc->bluetooth_rfkill,
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index 0ddc434fb93..649dcadd8ea 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -67,9 +67,11 @@ static const struct key_entry eeepc_wmi_keymap[] = {
 	{ KE_KEY, 0x82, { KEY_CAMERA } },
 	{ KE_KEY, 0x83, { KEY_CAMERA_ZOOMIN } },
 	{ KE_KEY, 0x88, { KEY_WLAN } },
+	{ KE_KEY, 0xbd, { KEY_CAMERA } },
 	{ KE_KEY, 0xcc, { KEY_SWITCHVIDEOMODE } },
 	{ KE_KEY, 0xe0, { KEY_PROG1 } }, /* Task Manager */
 	{ KE_KEY, 0xe1, { KEY_F14 } }, /* Change Resolution */
+	{ KE_KEY, 0xe8, { KEY_SCREENLOCK } },
 	{ KE_KEY, 0xe9, { KEY_BRIGHTNESS_ZERO } },
 	{ KE_KEY, 0xeb, { KEY_CAMERA_ZOOMOUT } },
 	{ KE_KEY, 0xec, { KEY_CAMERA_UP } },
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index 6c12db50316..c2f4bd8013b 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -202,7 +202,7 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
        if (ret)
                return ret;
 
-       /* Shift bits to accomodate the lower two data bits */
+       /* Shift bits to accommodate the lower two data bits */
        adc_val = (data << 2);
        addr++;
 
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
index d653104b59c..464bb3fc4d8 100644
--- a/drivers/platform/x86/intel_pmic_gpio.c
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -74,6 +74,19 @@ struct pmic_gpio {
 	u32			trigger_type;
 };
 
+static void pmic_program_irqtype(int gpio, int type)
+{
+	if (type & IRQ_TYPE_EDGE_RISING)
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
+	else
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
+	else
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
+};
+
 static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	if (offset > 8) {
@@ -166,16 +179,38 @@ static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 	return pg->irq_base + offset;
 }
 
+static void pmic_bus_lock(struct irq_data *data)
+{
+	struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&pg->buslock);
+}
+
+static void pmic_bus_sync_unlock(struct irq_data *data)
+{
+	struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
+
+	if (pg->update_type) {
+		unsigned int gpio = pg->update_type & ~GPIO_UPDATE_TYPE;
+
+		pmic_program_irqtype(gpio, pg->trigger_type);
+		pg->update_type = 0;
+	}
+	mutex_unlock(&pg->buslock);
+}
+
 /* the gpiointr register is read-clear, so just do nothing. */
 static void pmic_irq_unmask(struct irq_data *data) { }
 
 static void pmic_irq_mask(struct irq_data *data) { }
 
 static struct irq_chip pmic_irqchip = {
-	.name		= "PMIC-GPIO",
-	.irq_mask	= pmic_irq_mask,
-	.irq_unmask	= pmic_irq_unmask,
-	.irq_set_type	= pmic_irq_type,
+	.name			= "PMIC-GPIO",
+	.irq_mask		= pmic_irq_mask,
+	.irq_unmask		= pmic_irq_unmask,
+	.irq_set_type		= pmic_irq_type,
+	.irq_bus_lock		= pmic_bus_lock,
+	.irq_bus_sync_unlock	= pmic_bus_sync_unlock,
 };
 
 static irqreturn_t pmic_irq_handler(int irq, void *data)
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index de434c6dc2d..d347116d150 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -571,6 +571,16 @@ static struct dmi_system_id __initdata samsung_dmi_table[] = {
 		.callback = dmi_check_cb,
 	},
 	{
+		.ident = "R410 Plus",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+					"SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "R410P"),
+			DMI_MATCH(DMI_BOARD_NAME, "R460"),
+		},
+		.callback = dmi_check_cb,
+	},
+	{
 		.ident = "R518",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
@@ -591,12 +601,12 @@ static struct dmi_system_id __initdata samsung_dmi_table[] = {
 		.callback = dmi_check_cb,
 	},
 	{
-		.ident = "N150/N210/N220",
+		.ident = "N150/N210/N220/N230",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR,
 					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"),
-			DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"),
+			DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"),
 		},
 		.callback = dmi_check_cb,
 	},
@@ -771,6 +781,7 @@ static int __init samsung_init(void)
 
 	/* create a backlight device to talk to this one */
 	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = sabi_config->max_brightness;
 	backlight_device = backlight_device_register("samsung", &sdev->dev,
 						     NULL, &backlight_ops,
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index e642f5f2950..6fe8cd6e23b 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -138,6 +138,8 @@ MODULE_PARM_DESC(kbd_backlight_timeout,
 		 "1 for 30 seconds, 2 for 60 seconds and 3 to disable timeout "
 		 "(default: 0)");
 
+static void sony_nc_kbd_backlight_resume(void);
+
 enum sony_nc_rfkill {
 	SONY_WIFI,
 	SONY_BLUETOOTH,
@@ -771,11 +773,6 @@ static int sony_nc_handles_setup(struct platform_device *pd)
 	if (!handles)
 		return -ENOMEM;
 
-	sysfs_attr_init(&handles->devattr.attr);
-	handles->devattr.attr.name = "handles";
-	handles->devattr.attr.mode = S_IRUGO;
-	handles->devattr.show = sony_nc_handles_show;
-
 	for (i = 0; i < ARRAY_SIZE(handles->cap); i++) {
 		if (!acpi_callsetfunc(sony_nc_acpi_handle,
 					"SN00", i + 0x20, &result)) {
@@ -785,11 +782,18 @@ static int sony_nc_handles_setup(struct platform_device *pd)
 		}
 	}
 
-	/* allow reading capabilities via sysfs */
-	if (device_create_file(&pd->dev, &handles->devattr)) {
-		kfree(handles);
-		handles = NULL;
-		return -1;
+	if (debug) {
+		sysfs_attr_init(&handles->devattr.attr);
+		handles->devattr.attr.name = "handles";
+		handles->devattr.attr.mode = S_IRUGO;
+		handles->devattr.show = sony_nc_handles_show;
+
+		/* allow reading capabilities via sysfs */
+		if (device_create_file(&pd->dev, &handles->devattr)) {
+			kfree(handles);
+			handles = NULL;
+			return -1;
+		}
 	}
 
 	return 0;
@@ -798,7 +802,8 @@ static int sony_nc_handles_setup(struct platform_device *pd)
 static int sony_nc_handles_cleanup(struct platform_device *pd)
 {
 	if (handles) {
-		device_remove_file(&pd->dev, &handles->devattr);
+		if (debug)
+			device_remove_file(&pd->dev, &handles->devattr);
 		kfree(handles);
 		handles = NULL;
 	}
@@ -808,6 +813,11 @@ static int sony_nc_handles_cleanup(struct platform_device *pd)
 static int sony_find_snc_handle(int handle)
 {
 	int i;
+
+	/* not initialized yet, return early */
+	if (!handles)
+		return -1;
+
 	for (i = 0; i < 0x10; i++) {
 		if (handles->cap[i] == handle) {
 			dprintk("found handle 0x%.4x (offset: 0x%.2x)\n",
@@ -924,6 +934,14 @@ static ssize_t sony_nc_sysfs_store(struct device *dev,
 /*
  * Backlight device
  */
+struct sony_backlight_props {
+	struct backlight_device *dev;
+	int			handle;
+	u8			offset;
+	u8			maxlvl;
+};
+struct sony_backlight_props sony_bl_props;
+
 static int sony_backlight_update_status(struct backlight_device *bd)
 {
 	return acpi_callsetfunc(sony_nc_acpi_handle, "SBRT",
@@ -944,21 +962,26 @@ static int sony_nc_get_brightness_ng(struct backlight_device *bd)
 {
 	int result;
 	int *handle = (int *)bl_get_data(bd);
+	struct sony_backlight_props *sdev =
+		(struct sony_backlight_props *)bl_get_data(bd);
 
-	sony_call_snc_handle(*handle, 0x0200, &result);
+	sony_call_snc_handle(sdev->handle, 0x0200, &result);
 
-	return result & 0xff;
+	return (result & 0xff) - sdev->offset;
 }
 
 static int sony_nc_update_status_ng(struct backlight_device *bd)
 {
 	int value, result;
 	int *handle = (int *)bl_get_data(bd);
+	struct sony_backlight_props *sdev =
+		(struct sony_backlight_props *)bl_get_data(bd);
 
-	value = bd->props.brightness;
-	sony_call_snc_handle(*handle, 0x0100 | (value << 16), &result);
+	value = bd->props.brightness + sdev->offset;
+	if (sony_call_snc_handle(sdev->handle, 0x0100 | (value << 16), &result))
+		return -EIO;
 
-	return sony_nc_get_brightness_ng(bd);
+	return value;
 }
 
 static const struct backlight_ops sony_backlight_ops = {
@@ -971,8 +994,6 @@ static const struct backlight_ops sony_backlight_ng_ops = {
 	.update_status = sony_nc_update_status_ng,
 	.get_brightness = sony_nc_get_brightness_ng,
 };
-static int backlight_ng_handle;
-static struct backlight_device *sony_backlight_device;
 
 /*
  * New SNC-only Vaios event mapping to driver known keys
@@ -1168,6 +1189,9 @@ static int sony_nc_resume(struct acpi_device *device)
 	/* re-read rfkill state */
 	sony_nc_rfkill_update();
 
+	/* restore kbd backlight states */
+	sony_nc_kbd_backlight_resume();
+
 	return 0;
 }
 
@@ -1355,6 +1379,7 @@ out_no_enum:
 #define KBDBL_HANDLER	0x137
 #define KBDBL_PRESENT	0xB00
 #define	SET_MODE	0xC00
+#define SET_STATE	0xD00
 #define SET_TIMEOUT	0xE00
 
 struct kbd_backlight {
@@ -1377,6 +1402,10 @@ static ssize_t __sony_nc_kbd_backlight_mode_set(u8 value)
 				(value << 0x10) | SET_MODE, &result))
 		return -EIO;
 
+	/* Try to turn the light on/off immediately */
+	sony_call_snc_handle(KBDBL_HANDLER, (value << 0x10) | SET_STATE,
+			&result);
+
 	kbdbl_handle->mode = value;
 
 	return 0;
@@ -1458,7 +1487,7 @@ static int sony_nc_kbd_backlight_setup(struct platform_device *pd)
 {
 	int result;
 
-	if (sony_call_snc_handle(0x137, KBDBL_PRESENT, &result))
+	if (sony_call_snc_handle(KBDBL_HANDLER, KBDBL_PRESENT, &result))
 		return 0;
 	if (!(result & 0x02))
 		return 0;
@@ -1501,13 +1530,105 @@ outkzalloc:
 static int sony_nc_kbd_backlight_cleanup(struct platform_device *pd)
 {
 	if (kbdbl_handle) {
+		int result;
+
 		device_remove_file(&pd->dev, &kbdbl_handle->mode_attr);
 		device_remove_file(&pd->dev, &kbdbl_handle->timeout_attr);
+
+		/* restore the default hw behaviour */
+		sony_call_snc_handle(KBDBL_HANDLER, 0x1000 | SET_MODE, &result);
+		sony_call_snc_handle(KBDBL_HANDLER, SET_TIMEOUT, &result);
+
 		kfree(kbdbl_handle);
 	}
 	return 0;
 }
 
+static void sony_nc_kbd_backlight_resume(void)
+{
+	int ignore = 0;
+
+	if (!kbdbl_handle)
+		return;
+
+	if (kbdbl_handle->mode == 0)
+		sony_call_snc_handle(KBDBL_HANDLER, SET_MODE, &ignore);
+
+	if (kbdbl_handle->timeout != 0)
+		sony_call_snc_handle(KBDBL_HANDLER,
+				(kbdbl_handle->timeout << 0x10) | SET_TIMEOUT,
+				&ignore);
+}
+
+static void sony_nc_backlight_ng_read_limits(int handle,
+		struct sony_backlight_props *props)
+{
+	int offset;
+	acpi_status status;
+	u8 brlvl, i;
+	u8 min = 0xff, max = 0x00;
+	struct acpi_object_list params;
+	union acpi_object in_obj;
+	union acpi_object *lvl_enum;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	props->handle = handle;
+	props->offset = 0;
+	props->maxlvl = 0xff;
+
+	offset = sony_find_snc_handle(handle);
+	if (offset < 0)
+		return;
+
+	/* try to read the boundaries from ACPI tables, if we fail the above
+	 * defaults should be reasonable
+	 */
+	params.count = 1;
+	params.pointer = &in_obj;
+	in_obj.type = ACPI_TYPE_INTEGER;
+	in_obj.integer.value = offset;
+	status = acpi_evaluate_object(sony_nc_acpi_handle, "SN06", &params,
+			&buffer);
+	if (ACPI_FAILURE(status))
+		return;
+
+	lvl_enum = (union acpi_object *) buffer.pointer;
+	if (!lvl_enum) {
+		pr_err("No SN06 return object.");
+		return;
+	}
+	if (lvl_enum->type != ACPI_TYPE_BUFFER) {
+		pr_err("Invalid SN06 return object 0x%.2x\n",
+		       lvl_enum->type);
+		goto out_invalid;
+	}
+
+	/* the buffer lists brightness levels available, brightness levels are
+	 * from 0 to 8 in the array, other values are used by ALS control.
+	 */
+	for (i = 0; i < 9 && i < lvl_enum->buffer.length; i++) {
+
+		brlvl = *(lvl_enum->buffer.pointer + i);
+		dprintk("Brightness level: %d\n", brlvl);
+
+		if (!brlvl)
+			break;
+
+		if (brlvl > max)
+			max = brlvl;
+		if (brlvl < min)
+			min = brlvl;
+	}
+	props->offset = min;
+	props->maxlvl = max;
+	dprintk("Brightness levels: min=%d max=%d\n", props->offset,
+			props->maxlvl);
+
+out_invalid:
+	kfree(buffer.pointer);
+	return;
+}
+
 static void sony_nc_backlight_setup(void)
 {
 	acpi_handle unused;
@@ -1516,14 +1637,14 @@ static void sony_nc_backlight_setup(void)
 	struct backlight_properties props;
 
 	if (sony_find_snc_handle(0x12f) != -1) {
-		backlight_ng_handle = 0x12f;
 		ops = &sony_backlight_ng_ops;
-		max_brightness = 0xff;
+		sony_nc_backlight_ng_read_limits(0x12f, &sony_bl_props);
+		max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
 
 	} else if (sony_find_snc_handle(0x137) != -1) {
-		backlight_ng_handle = 0x137;
 		ops = &sony_backlight_ng_ops;
-		max_brightness = 0xff;
+		sony_nc_backlight_ng_read_limits(0x137, &sony_bl_props);
+		max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
 
 	} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
 						&unused))) {
@@ -1536,22 +1657,22 @@ static void sony_nc_backlight_setup(void)
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = max_brightness;
-	sony_backlight_device = backlight_device_register("sony", NULL,
-							  &backlight_ng_handle,
-							  ops, &props);
+	sony_bl_props.dev = backlight_device_register("sony", NULL,
+						      &sony_bl_props,
+						      ops, &props);
 
-	if (IS_ERR(sony_backlight_device)) {
-		pr_warning(DRV_PFX "unable to register backlight device\n");
-		sony_backlight_device = NULL;
+	if (IS_ERR(sony_bl_props.dev)) {
+		pr_warn(DRV_PFX "unable to register backlight device\n");
+		sony_bl_props.dev = NULL;
 	} else
-		sony_backlight_device->props.brightness =
-		    ops->get_brightness(sony_backlight_device);
+		sony_bl_props.dev->props.brightness =
+			ops->get_brightness(sony_bl_props.dev);
 }
 
 static void sony_nc_backlight_cleanup(void)
 {
-	if (sony_backlight_device)
-		backlight_device_unregister(sony_backlight_device);
+	if (sony_bl_props.dev)
+		backlight_device_unregister(sony_bl_props.dev);
 }
 
 static int sony_nc_add(struct acpi_device *device)
@@ -2549,7 +2670,7 @@ static long sonypi_misc_ioctl(struct file *fp, unsigned int cmd,
 	mutex_lock(&spic_dev.lock);
 	switch (cmd) {
 	case SONYPI_IOCGBRT:
-		if (sony_backlight_device == NULL) {
+		if (sony_bl_props.dev == NULL) {
 			ret = -EIO;
 			break;
 		}
@@ -2562,7 +2683,7 @@ static long sonypi_misc_ioctl(struct file *fp, unsigned int cmd,
 				ret = -EFAULT;
 		break;
 	case SONYPI_IOCSBRT:
-		if (sony_backlight_device == NULL) {
+		if (sony_bl_props.dev == NULL) {
 			ret = -EIO;
 			break;
 		}
@@ -2576,8 +2697,8 @@ static long sonypi_misc_ioctl(struct file *fp, unsigned int cmd,
 			break;
 		}
 		/* sync the backlight device status */
-		sony_backlight_device->props.brightness =
-		    sony_backlight_get_brightness(sony_backlight_device);
+		sony_bl_props.dev->props.brightness =
+		    sony_backlight_get_brightness(sony_bl_props.dev);
 		break;
 	case SONYPI_IOCGBAT1CAP:
 		if (ec_read16(SONYPI_BAT1_FULL, &val16)) {
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a08561f5349..562fcf0dd2b 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -128,7 +128,8 @@ enum {
 };
 
 /* ACPI HIDs */
-#define TPACPI_ACPI_HKEY_HID		"IBM0068"
+#define TPACPI_ACPI_IBM_HKEY_HID	"IBM0068"
+#define TPACPI_ACPI_LENOVO_HKEY_HID	"LEN0068"
 #define TPACPI_ACPI_EC_HID		"PNP0C09"
 
 /* Input IDs */
@@ -3879,7 +3880,8 @@ errexit:
 }
 
 static const struct acpi_device_id ibm_htk_device_ids[] = {
-	{TPACPI_ACPI_HKEY_HID, 0},
+	{TPACPI_ACPI_IBM_HKEY_HID, 0},
+	{TPACPI_ACPI_LENOVO_HKEY_HID, 0},
 	{"", 0},
 };
 
@@ -8618,8 +8620,7 @@ static bool __pure __init tpacpi_is_valid_fw_id(const char* const s,
 		tpacpi_is_fw_digit(s[1]) &&
 		s[2] == t && s[3] == 'T' &&
 		tpacpi_is_fw_digit(s[4]) &&
-		tpacpi_is_fw_digit(s[5]) &&
-		s[6] == 'W' && s[7] == 'W';
+		tpacpi_is_fw_digit(s[5]);
 }
 
 /* returns 0 - probe ok, or < 0 - probe error.
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index 4a651f69e17..bc00693d0c7 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -320,7 +320,7 @@ void pnp_remove_card_device(struct pnp_dev *dev)
  * pnp_request_card_device - Searches for a PnP device under the specified card
  * @clink: pointer to the card link, cannot be NULL
  * @id: pointer to a PnP ID structure that explains the rules for finding the device
- * @from: Starting place to search from. If NULL it will start from the begining.
+ * @from: Starting place to search from. If NULL it will start from the beginning.
  */
 struct pnp_dev *pnp_request_card_device(struct pnp_card_link *clink,
 					const char *id, struct pnp_dev *from)
@@ -369,7 +369,7 @@ err_out:
 
 /**
  * pnp_release_card_device - call this when the driver no longer needs the device
- * @dev: pointer to the PnP device stucture
+ * @dev: pointer to the PnP device structure
  */
 void pnp_release_card_device(struct pnp_dev *dev)
 {
diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c
index 8591f6ab1b3..b859d16cf78 100644
--- a/drivers/pnp/pnpbios/bioscalls.c
+++ b/drivers/pnp/pnpbios/bioscalls.c
@@ -219,7 +219,7 @@ void pnpbios_print_status(const char *module, u16 status)
 		       module);
 		break;
 	case PNP_HARDWARE_ERROR:
-		printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occured\n",
+		printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occurred\n",
 		       module);
 		break;
 	default:
diff --git a/drivers/pps/Kconfig b/drivers/pps/Kconfig
index f0d3376b58b..258ca596e1b 100644
--- a/drivers/pps/Kconfig
+++ b/drivers/pps/Kconfig
@@ -35,7 +35,7 @@ config NTP_PPS
 	depends on PPS && !NO_HZ
 	help
 	  This option adds support for direct in-kernel time
-	  syncronization using an external PPS signal.
+	  synchronization using an external PPS signal.
 
 	  It doesn't work on tickless systems at the moment.
 
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 8000985d0e8..643697f7139 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -919,7 +919,7 @@ EXPORT_SYMBOL_GPL(ps3_disable_pm);
  * @offset: Offset in bytes from the start of the trace buffer.
  * @buf: Copy destination.
  * @count: Maximum count of bytes to copy.
- * @bytes_copied: Pointer to a variable that will recieve the number of
+ * @bytes_copied: Pointer to a variable that will receive the number of
  *  bytes copied to @buf.
  *
  * On error @buf will contain any successfully copied trace buffer data
@@ -974,7 +974,7 @@ EXPORT_SYMBOL_GPL(ps3_lpm_copy_tb);
  * @offset: Offset in bytes from the start of the trace buffer.
  * @buf: A __user copy destination.
  * @count: Maximum count of bytes to copy.
- * @bytes_copied: Pointer to a variable that will recieve the number of
+ * @bytes_copied: Pointer to a variable that will receive the number of
  *  bytes copied to @buf.
  *
  * On error @buf will contain any successfully copied trace buffer data
@@ -1074,7 +1074,7 @@ EXPORT_SYMBOL_GPL(ps3_disable_pm_interrupts);
 
 /**
  * ps3_lpm_open - Open the logical performance monitor device.
- * @tb_type: Specifies the type of trace buffer lv1 sould use for this lpm
+ * @tb_type: Specifies the type of trace buffer lv1 should use for this lpm
  *  instance, specified by one of enum ps3_lpm_tb_type.
  * @tb_cache: Optional user supplied buffer to use as the trace buffer cache.
  *  If NULL, the driver will allocate and manage an internal buffer.
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index d37c445f0ed..1b98367110c 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -80,7 +80,7 @@ static void __maybe_unused _dump_sm_header(
  *
  * Currently all messages received from the system manager are either
  * (16 bytes header + 8 bytes payload = 24 bytes) or (16 bytes header
- * + 16 bytes payload = 32 bytes).  This knowlege is used to simplify
+ * + 16 bytes payload = 32 bytes).  This knowledge is used to simplify
  * the logic.
  */
 
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 3a59d5f018d..ee893581d4b 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -295,7 +295,7 @@ static int __devinit rio_add_device(struct rio_dev *rdev)
 }
 
 /**
- * rio_enable_rx_tx_port - enable input reciever and output transmitter of
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
  * given port
  * @port: Master port associated with the RIO network
  * @local: local=1 select local port otherwise a far device is reached
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index c29719cacbc..86c9a091a2f 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1171,16 +1171,17 @@ static int rio_hdid_setup(char *str)
 
 __setup("riohdid=", rio_hdid_setup);
 
-void rio_register_mport(struct rio_mport *port)
+int rio_register_mport(struct rio_mport *port)
 {
 	if (next_portid >= RIO_MAX_MPORTS) {
 		pr_err("RIO: reached specified max number of mports\n");
-		return;
+		return 1;
 	}
 
 	port->id = next_portid++;
 	port->host_deviceid = rio_get_hdid(port->id);
 	list_add_tail(&port->node, &rio_mports);
+	return 0;
 }
 
 EXPORT_SYMBOL_GPL(rio_local_get_device_id);
diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c
index 095016a9dec..043ee3136e4 100644
--- a/drivers/rapidio/switches/idt_gen2.c
+++ b/drivers/rapidio/switches/idt_gen2.c
@@ -95,6 +95,9 @@ idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
 	else
 		table++;
 
+	if (route_port == RIO_INVALID_ROUTE)
+		route_port = IDT_DEFAULT_ROUTE;
+
 	rio_mport_write_config_32(mport, destid, hopcount,
 				  LOCAL_RTE_CONF_DESTID_SEL, table);
 
@@ -411,6 +414,12 @@ static int idtg2_switch_init(struct rio_dev *rdev, int do_enum)
 	rdev->rswitch->em_handle = idtg2_em_handler;
 	rdev->rswitch->sw_sysfs = idtg2_sysfs;
 
+	if (do_enum) {
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev,
+				    RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
+	}
+
 	return 0;
 }
 
@@ -418,3 +427,4 @@ DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init);
 DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init);
 DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTVPS1616, idtg2_switch_init);
 DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTSPS1616, idtg2_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1432, idtg2_switch_init);
diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c
index 3a971077e7b..d06ee2d44b4 100644
--- a/drivers/rapidio/switches/idtcps.c
+++ b/drivers/rapidio/switches/idtcps.c
@@ -26,6 +26,9 @@ idtcps_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
 {
 	u32 result;
 
+	if (route_port == RIO_INVALID_ROUTE)
+		route_port = CPS_DEFAULT_ROUTE;
+
 	if (table == RIO_GLOBAL_TABLE) {
 		rio_mport_write_config_32(mport, destid, hopcount,
 				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
@@ -130,6 +133,9 @@ static int idtcps_switch_init(struct rio_dev *rdev, int do_enum)
 		/* set TVAL = ~50us */
 		rio_write_config_32(rdev,
 			rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev,
+				    RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE);
 	}
 
 	return 0;
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
index 1a62934bfeb..db8b8028988 100644
--- a/drivers/rapidio/switches/tsi57x.c
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -303,6 +303,12 @@ static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum)
 	rdev->rswitch->em_init = tsi57x_em_init;
 	rdev->rswitch->em_handle = tsi57x_em_handler;
 
+	if (do_enum) {
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT,
+				    RIO_INVALID_ROUTE);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 3ffc6979d16..0fae51c4845 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1313,7 +1313,7 @@ static int _regulator_enable(struct regulator_dev *rdev)
 				return -EINVAL;
 
 			/* Query before enabling in case configuration
-			 * dependant.  */
+			 * dependent.  */
 			ret = _regulator_get_enable_time(rdev);
 			if (ret >= 0) {
 				delay = ret;
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index a8f4ecfb084..daff7fd0e95 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -262,7 +262,7 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client,
 
 	if (err) {
 		dev_warn(max8952->dev, "VID0/1 gpio invalid: "
-				"DVS not avilable.\n");
+				"DVS not available.\n");
 		max8952->vid0 = 0;
 		max8952->vid1 = 0;
 		/* Mark invalid */
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e1878877399..42891726ea7 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -3,10 +3,10 @@
 #
 
 config RTC_LIB
-	tristate
+	bool
 
 menuconfig RTC_CLASS
-	tristate "Real Time Clock"
+	bool "Real Time Clock"
 	default n
 	depends on !S390
 	select RTC_LIB
@@ -15,9 +15,6 @@ menuconfig RTC_CLASS
  	  be allowed to plug one or more RTCs to your system. You will
 	  probably want to enable one or more of the interfaces below.
 
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-core.
-
 if RTC_CLASS
 
 config RTC_HCTOSYS
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 09b4437b3e6..4194e59e14c 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -41,26 +41,21 @@ static void rtc_device_release(struct device *dev)
  * system's wall clock; restore it on resume().
  */
 
-static struct timespec	delta;
 static time_t		oldtime;
+static struct timespec	oldts;
 
 static int rtc_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct rtc_device	*rtc = to_rtc_device(dev);
 	struct rtc_time		tm;
-	struct timespec		ts = current_kernel_time();
 
 	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 		return 0;
 
 	rtc_read_time(rtc, &tm);
+	ktime_get_ts(&oldts);
 	rtc_tm_to_time(&tm, &oldtime);
 
-	/* RTC precision is 1 second; adjust delta for avg 1/2 sec err */
-	set_normalized_timespec(&delta,
-				ts.tv_sec - oldtime,
-				ts.tv_nsec - (NSEC_PER_SEC >> 1));
-
 	return 0;
 }
 
@@ -70,10 +65,12 @@ static int rtc_resume(struct device *dev)
 	struct rtc_time		tm;
 	time_t			newtime;
 	struct timespec		time;
+	struct timespec		newts;
 
 	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 		return 0;
 
+	ktime_get_ts(&newts);
 	rtc_read_time(rtc, &tm);
 	if (rtc_valid_tm(&tm) != 0) {
 		pr_debug("%s:  bogus resume time\n", dev_name(&rtc->dev));
@@ -85,15 +82,13 @@ static int rtc_resume(struct device *dev)
 			pr_debug("%s:  time travel!\n", dev_name(&rtc->dev));
 		return 0;
 	}
+	/* calculate the RTC time delta */
+	set_normalized_timespec(&time, newtime - oldtime, 0);
 
-	/* restore wall clock using delta against this RTC;
-	 * adjust again for avg 1/2 second RTC sampling error
-	 */
-	set_normalized_timespec(&time,
-				newtime + delta.tv_sec,
-				(NSEC_PER_SEC >> 1) + delta.tv_nsec);
-	do_settimeofday(&time);
+	/* subtract kernel time between rtc_suspend to rtc_resume */
+	time = timespec_sub(time, timespec_sub(newts, oldts));
 
+	timekeeping_inject_sleeptime(&time);
 	return 0;
 }
 
@@ -171,7 +166,7 @@ struct rtc_device *rtc_device_register(const char *name, struct device *dev,
 	err = __rtc_read_alarm(rtc, &alrm);
 
 	if (!err && !rtc_valid_tm(&alrm.time))
-		rtc_set_alarm(rtc, &alrm);
+		rtc_initialize_alarm(rtc, &alrm);
 
 	strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE);
 	dev_set_name(&rtc->dev, "rtc%d", id);
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 8ec6b069a7f..ef6316acec4 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -375,6 +375,32 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 }
 EXPORT_SYMBOL_GPL(rtc_set_alarm);
 
+/* Called once per device from rtc_device_register */
+int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+{
+	int err;
+
+	err = rtc_valid_tm(&alarm->time);
+	if (err != 0)
+		return err;
+
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return err;
+
+	rtc->aie_timer.node.expires = rtc_tm_to_ktime(alarm->time);
+	rtc->aie_timer.period = ktime_set(0, 0);
+	if (alarm->enabled) {
+		rtc->aie_timer.enabled = 1;
+		timerqueue_add(&rtc->timerqueue, &rtc->aie_timer.node);
+	}
+	mutex_unlock(&rtc->ops_lock);
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtc_initialize_alarm);
+
+
+
 int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled)
 {
 	int err = mutex_lock_interruptible(&rtc->ops_lock);
@@ -454,7 +480,7 @@ EXPORT_SYMBOL_GPL(rtc_update_irq_enable);
  * @rtc: pointer to the rtc device
  *
  * This function is called when an AIE, UIE or PIE mode interrupt
- * has occured (or been emulated).
+ * has occurred (or been emulated).
  *
  * Triggers the registered irq_task function callback.
  */
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 518a76ec71c..e39b77a4609 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -60,7 +60,7 @@ static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
 	/*
 	 * The Calendar Alarm register does not have a field for
 	 * the year - so these will return an invalid value.  When an
-	 * alarm is set, at91_alarm_year wille store the current year.
+	 * alarm is set, at91_alarm_year will store the current year.
 	 */
 	tm->tm_year  = bcd2bin(date & AT91_RTC_CENT) * 100;	/* century */
 	tm->tm_year += bcd2bin((date & AT91_RTC_YEAR) >> 8);	/* year */
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index ca9cff85ab8..90d866272c8 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -20,9 +20,9 @@
  * write would be discarded and things quickly fall apart.
  *
  * To keep this delay from significantly degrading performance (we, in theory,
- * would have to sleep for up to 1 second everytime we wanted to write a
+ * would have to sleep for up to 1 second every time we wanted to write a
  * register), we only check the write pending status before we start to issue
- * a new write.  We bank on the idea that it doesnt matter when the sync
+ * a new write.  We bank on the idea that it doesn't matter when the sync
  * happens so long as we don't attempt another write before it does.  The only
  * time userspace would take this penalty is when they try and do multiple
  * operations right after another ... but in this case, they need to take the
@@ -250,6 +250,8 @@ static int bfin_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
 		bfin_rtc_int_set_alarm(rtc);
 	else
 		bfin_rtc_int_clear(~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+
+	return 0;
 }
 
 static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c
index 316f484999b..80f9c88214c 100644
--- a/drivers/rtc/rtc-coh901331.c
+++ b/drivers/rtc/rtc-coh901331.c
@@ -220,6 +220,7 @@ static int __init coh901331_probe(struct platform_device *pdev)
 	}
 	clk_disable(rtap->clk);
 
+	platform_set_drvdata(pdev, rtap);
 	rtap->rtc = rtc_device_register("coh901331", &pdev->dev, &coh901331_ops,
 					 THIS_MODULE);
 	if (IS_ERR(rtap->rtc)) {
@@ -227,11 +228,10 @@ static int __init coh901331_probe(struct platform_device *pdev)
 		goto out_no_rtc;
 	}
 
-	platform_set_drvdata(pdev, rtap);
-
 	return 0;
 
  out_no_rtc:
+	platform_set_drvdata(pdev, NULL);
  out_no_clk_enable:
 	clk_put(rtap->clk);
  out_no_clk:
diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c
index 8d46838dff8..755e1fe914a 100644
--- a/drivers/rtc/rtc-davinci.c
+++ b/drivers/rtc/rtc-davinci.c
@@ -524,6 +524,8 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
 		goto fail2;
 	}
 
+	platform_set_drvdata(pdev, davinci_rtc);
+
 	davinci_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
 				    &davinci_rtc_ops, THIS_MODULE);
 	if (IS_ERR(davinci_rtc->rtc)) {
@@ -553,8 +555,6 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
 
 	rtcss_write(davinci_rtc, PRTCSS_RTC_CCTRL_CAEN, PRTCSS_RTC_CCTRL);
 
-	platform_set_drvdata(pdev, davinci_rtc);
-
 	device_init_wakeup(&pdev->dev, 0);
 
 	return 0;
@@ -562,6 +562,7 @@ static int __init davinci_rtc_probe(struct platform_device *pdev)
 fail4:
 	rtc_device_unregister(davinci_rtc->rtc);
 fail3:
+	platform_set_drvdata(pdev, NULL);
 	iounmap(davinci_rtc->base);
 fail2:
 	release_mem_region(davinci_rtc->pbase, davinci_rtc->base_size);
diff --git a/drivers/rtc/rtc-ds1286.c b/drivers/rtc/rtc-ds1286.c
index 60ce6960082..47e681df31e 100644
--- a/drivers/rtc/rtc-ds1286.c
+++ b/drivers/rtc/rtc-ds1286.c
@@ -355,6 +355,7 @@ static int __devinit ds1286_probe(struct platform_device *pdev)
 		goto out;
 	}
 	spin_lock_init(&priv->lock);
+	platform_set_drvdata(pdev, priv);
 	rtc = rtc_device_register("ds1286", &pdev->dev,
 				  &ds1286_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
@@ -362,7 +363,6 @@ static int __devinit ds1286_probe(struct platform_device *pdev)
 		goto out;
 	}
 	priv->rtc = rtc;
-	platform_set_drvdata(pdev, priv);
 	return 0;
 
 out:
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index 11ae64dcbf3..335551d333b 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -151,6 +151,7 @@ static int __init ep93xx_rtc_probe(struct platform_device *pdev)
 		return -ENXIO;
 
 	pdev->dev.platform_data = ep93xx_rtc;
+	platform_set_drvdata(pdev, rtc);
 
 	rtc = rtc_device_register(pdev->name,
 				&pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
@@ -159,8 +160,6 @@ static int __init ep93xx_rtc_probe(struct platform_device *pdev)
 		goto exit;
 	}
 
-	platform_set_drvdata(pdev, rtc);
-
 	err = sysfs_create_group(&pdev->dev.kobj, &ep93xx_rtc_sysfs_files);
 	if (err)
 		goto fail;
@@ -168,9 +167,9 @@ static int __init ep93xx_rtc_probe(struct platform_device *pdev)
 	return 0;
 
 fail:
-	platform_set_drvdata(pdev, NULL);
 	rtc_device_unregister(rtc);
 exit:
+	platform_set_drvdata(pdev, NULL);
 	pdev->dev.platform_data = NULL;
 	return err;
 }
diff --git a/drivers/rtc/rtc-lpc32xx.c b/drivers/rtc/rtc-lpc32xx.c
index ec8701ce99f..ae16250c762 100644
--- a/drivers/rtc/rtc-lpc32xx.c
+++ b/drivers/rtc/rtc-lpc32xx.c
@@ -240,7 +240,7 @@ static int __devinit lpc32xx_rtc_probe(struct platform_device *pdev)
 	spin_lock_init(&rtc->lock);
 
 	/*
-	 * The RTC is on a seperate power domain and can keep it's state
+	 * The RTC is on a separate power domain and can keep it's state
 	 * across a chip power cycle. If the RTC has never been previously
 	 * setup, then set it up now for the first time.
 	 */
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 69fe664a222..eda128fc1d3 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -783,6 +783,9 @@ static int m41t80_probe(struct i2c_client *client,
 		goto exit;
 	}
 
+	clientdata->features = id->driver_data;
+	i2c_set_clientdata(client, clientdata);
+
 	rtc = rtc_device_register(client->name, &client->dev,
 				  &m41t80_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
@@ -792,8 +795,6 @@ static int m41t80_probe(struct i2c_client *client,
 	}
 
 	clientdata->rtc = rtc;
-	clientdata->features = id->driver_data;
-	i2c_set_clientdata(client, clientdata);
 
 	/* Make sure HT (Halt Update) bit is cleared */
 	rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR);
diff --git a/drivers/rtc/rtc-max8925.c b/drivers/rtc/rtc-max8925.c
index 174036dda78..3bc046f427e 100644
--- a/drivers/rtc/rtc-max8925.c
+++ b/drivers/rtc/rtc-max8925.c
@@ -257,6 +257,10 @@ static int __devinit max8925_rtc_probe(struct platform_device *pdev)
 		goto out_irq;
 	}
 
+	dev_set_drvdata(&pdev->dev, info);
+	/* XXX - isn't this redundant? */
+	platform_set_drvdata(pdev, info);
+
 	info->rtc_dev = rtc_device_register("max8925-rtc", &pdev->dev,
 					&max8925_rtc_ops, THIS_MODULE);
 	ret = PTR_ERR(info->rtc_dev);
@@ -265,11 +269,9 @@ static int __devinit max8925_rtc_probe(struct platform_device *pdev)
 		goto out_rtc;
 	}
 
-	dev_set_drvdata(&pdev->dev, info);
-	platform_set_drvdata(pdev, info);
-
 	return 0;
 out_rtc:
+	platform_set_drvdata(pdev, NULL);
 	free_irq(chip->irq_base + MAX8925_IRQ_RTC_ALARM0, info);
 out_irq:
 	kfree(info);
diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c
index 3f7bc6b9fef..2e48aa60427 100644
--- a/drivers/rtc/rtc-max8998.c
+++ b/drivers/rtc/rtc-max8998.c
@@ -265,6 +265,8 @@ static int __devinit max8998_rtc_probe(struct platform_device *pdev)
 	info->rtc = max8998->rtc;
 	info->irq = max8998->irq_base + MAX8998_IRQ_ALARM0;
 
+	platform_set_drvdata(pdev, info);
+
 	info->rtc_dev = rtc_device_register("max8998-rtc", &pdev->dev,
 			&max8998_rtc_ops, THIS_MODULE);
 
@@ -274,8 +276,6 @@ static int __devinit max8998_rtc_probe(struct platform_device *pdev)
 		goto out_rtc;
 	}
 
-	platform_set_drvdata(pdev, info);
-
 	ret = request_threaded_irq(info->irq, NULL, max8998_rtc_alarm_irq, 0,
 			"rtc-alarm0", info);
 
@@ -293,6 +293,7 @@ static int __devinit max8998_rtc_probe(struct platform_device *pdev)
 	return 0;
 
 out_rtc:
+	platform_set_drvdata(pdev, NULL);
 	kfree(info);
 	return ret;
 }
diff --git a/drivers/rtc/rtc-mc13xxx.c b/drivers/rtc/rtc-mc13xxx.c
index c4200646955..a1a278bc340 100644
--- a/drivers/rtc/rtc-mc13xxx.c
+++ b/drivers/rtc/rtc-mc13xxx.c
@@ -349,11 +349,15 @@ static int __devinit mc13xxx_rtc_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_alarm_irq_request;
 
+	mc13xxx_unlock(mc13xxx);
+
 	priv->rtc = rtc_device_register(pdev->name,
 			&pdev->dev, &mc13xxx_rtc_ops, THIS_MODULE);
 	if (IS_ERR(priv->rtc)) {
 		ret = PTR_ERR(priv->rtc);
 
+		mc13xxx_lock(mc13xxx);
+
 		mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_TODA, priv);
 err_alarm_irq_request:
 
@@ -365,12 +369,12 @@ err_reset_irq_status:
 		mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_RTCRST, priv);
 err_reset_irq_request:
 
+		mc13xxx_unlock(mc13xxx);
+
 		platform_set_drvdata(pdev, NULL);
 		kfree(priv);
 	}
 
-	mc13xxx_unlock(mc13xxx);
-
 	return ret;
 }
 
@@ -401,6 +405,7 @@ const struct platform_device_id mc13xxx_rtc_idtable[] = {
 	}, {
 		.name = "mc13892-rtc",
 	},
+	{ }
 };
 
 static struct platform_driver mc13xxx_rtc_driver = {
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index b86bc328463..b2f096871a9 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -319,7 +319,7 @@ static irqreturn_t mrst_rtc_irq(int irq, void *p)
 	return IRQ_NONE;
 }
 
-static int __init
+static int __devinit
 vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
 {
 	int retval = 0;
@@ -342,6 +342,8 @@ vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
 
 	mrst_rtc.irq = rtc_irq;
 	mrst_rtc.iomem = iomem;
+	mrst_rtc.dev = dev;
+	dev_set_drvdata(dev, &mrst_rtc);
 
 	mrst_rtc.rtc = rtc_device_register(driver_name, dev,
 				&mrst_rtc_ops, THIS_MODULE);
@@ -350,8 +352,6 @@ vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
 		goto cleanup0;
 	}
 
-	mrst_rtc.dev = dev;
-	dev_set_drvdata(dev, &mrst_rtc);
 	rename_region(iomem, dev_name(&mrst_rtc.rtc->dev));
 
 	spin_lock_irq(&rtc_lock);
@@ -376,9 +376,10 @@ vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
 	return 0;
 
 cleanup1:
-	mrst_rtc.dev = NULL;
 	rtc_device_unregister(mrst_rtc.rtc);
 cleanup0:
+	dev_set_drvdata(dev, NULL);
+	mrst_rtc.dev = NULL;
 	release_region(iomem->start, iomem->end + 1 - iomem->start);
 	dev_err(dev, "rtc-mrst: unable to initialise\n");
 	return retval;
@@ -391,7 +392,7 @@ static void rtc_mrst_do_shutdown(void)
 	spin_unlock_irq(&rtc_lock);
 }
 
-static void __exit rtc_mrst_do_remove(struct device *dev)
+static void __devexit rtc_mrst_do_remove(struct device *dev)
 {
 	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
 	struct resource *iomem;
@@ -500,14 +501,14 @@ static inline int mrst_poweroff(struct device *dev)
 
 #endif
 
-static int __init vrtc_mrst_platform_probe(struct platform_device *pdev)
+static int __devinit vrtc_mrst_platform_probe(struct platform_device *pdev)
 {
 	return vrtc_mrst_do_probe(&pdev->dev,
 			platform_get_resource(pdev, IORESOURCE_MEM, 0),
 			platform_get_irq(pdev, 0));
 }
 
-static int __exit vrtc_mrst_platform_remove(struct platform_device *pdev)
+static int __devexit vrtc_mrst_platform_remove(struct platform_device *pdev)
 {
 	rtc_mrst_do_remove(&pdev->dev);
 	return 0;
@@ -525,7 +526,7 @@ MODULE_ALIAS("platform:vrtc_mrst");
 
 static struct platform_driver vrtc_mrst_platform_driver = {
 	.probe		= vrtc_mrst_platform_probe,
-	.remove		= __exit_p(vrtc_mrst_platform_remove),
+	.remove		= __devexit_p(vrtc_mrst_platform_remove),
 	.shutdown	= vrtc_mrst_platform_shutdown,
 	.driver = {
 		.name		= (char *) driver_name,
diff --git a/drivers/rtc/rtc-msm6242.c b/drivers/rtc/rtc-msm6242.c
index 67820626e18..fcb113c1112 100644
--- a/drivers/rtc/rtc-msm6242.c
+++ b/drivers/rtc/rtc-msm6242.c
@@ -214,6 +214,7 @@ static int __init msm6242_rtc_probe(struct platform_device *dev)
 		error = -ENOMEM;
 		goto out_free_priv;
 	}
+	platform_set_drvdata(dev, priv);
 
 	rtc = rtc_device_register("rtc-msm6242", &dev->dev, &msm6242_rtc_ops,
 				  THIS_MODULE);
@@ -223,10 +224,10 @@ static int __init msm6242_rtc_probe(struct platform_device *dev)
 	}
 
 	priv->rtc = rtc;
-	platform_set_drvdata(dev, priv);
 	return 0;
 
 out_unmap:
+	platform_set_drvdata(dev, NULL);
 	iounmap(priv->regs);
 out_free_priv:
 	kfree(priv);
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 826ab64a8fa..d814417bee8 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -418,14 +418,6 @@ static int __init mxc_rtc_probe(struct platform_device *pdev)
 		goto exit_put_clk;
 	}
 
-	rtc = rtc_device_register(pdev->name, &pdev->dev, &mxc_rtc_ops,
-				  THIS_MODULE);
-	if (IS_ERR(rtc)) {
-		ret = PTR_ERR(rtc);
-		goto exit_put_clk;
-	}
-
-	pdata->rtc = rtc;
 	platform_set_drvdata(pdev, pdata);
 
 	/* Configure and enable the RTC */
@@ -438,8 +430,19 @@ static int __init mxc_rtc_probe(struct platform_device *pdev)
 		pdata->irq = -1;
 	}
 
+	rtc = rtc_device_register(pdev->name, &pdev->dev, &mxc_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		ret = PTR_ERR(rtc);
+		goto exit_clr_drvdata;
+	}
+
+	pdata->rtc = rtc;
+
 	return 0;
 
+exit_clr_drvdata:
+	platform_set_drvdata(pdev, NULL);
 exit_put_clk:
 	clk_disable(pdata->clk);
 	clk_put(pdata->clk);
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index de0dd7b1f14..bcae8dd4149 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -394,7 +394,7 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
 	return 0;
 
 fail2:
-	free_irq(omap_rtc_timer, NULL);
+	free_irq(omap_rtc_timer, rtc);
 fail1:
 	rtc_device_unregister(rtc);
 fail0:
diff --git a/drivers/rtc/rtc-pcap.c b/drivers/rtc/rtc-pcap.c
index a633abc4289..cd4f198cc2e 100644
--- a/drivers/rtc/rtc-pcap.c
+++ b/drivers/rtc/rtc-pcap.c
@@ -151,6 +151,8 @@ static int __devinit pcap_rtc_probe(struct platform_device *pdev)
 
 	pcap_rtc->pcap = dev_get_drvdata(pdev->dev.parent);
 
+	platform_set_drvdata(pdev, pcap_rtc);
+
 	pcap_rtc->rtc = rtc_device_register("pcap", &pdev->dev,
 				  &pcap_rtc_ops, THIS_MODULE);
 	if (IS_ERR(pcap_rtc->rtc)) {
@@ -158,7 +160,6 @@ static int __devinit pcap_rtc_probe(struct platform_device *pdev)
 		goto fail_rtc;
 	}
 
-	platform_set_drvdata(pdev, pcap_rtc);
 
 	timer_irq = pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_1HZ);
 	alarm_irq = pcap_to_irq(pcap_rtc->pcap, PCAP_IRQ_TODA);
@@ -177,6 +178,7 @@ fail_alarm:
 fail_timer:
 	rtc_device_unregister(pcap_rtc->rtc);
 fail_rtc:
+	platform_set_drvdata(pdev, NULL);
 	kfree(pcap_rtc);
 	return err;
 }
diff --git a/drivers/rtc/rtc-rp5c01.c b/drivers/rtc/rtc-rp5c01.c
index 694da39b6dd..359da6d020b 100644
--- a/drivers/rtc/rtc-rp5c01.c
+++ b/drivers/rtc/rtc-rp5c01.c
@@ -249,15 +249,15 @@ static int __init rp5c01_rtc_probe(struct platform_device *dev)
 
 	spin_lock_init(&priv->lock);
 
+	platform_set_drvdata(dev, priv);
+
 	rtc = rtc_device_register("rtc-rp5c01", &dev->dev, &rp5c01_rtc_ops,
 				  THIS_MODULE);
 	if (IS_ERR(rtc)) {
 		error = PTR_ERR(rtc);
 		goto out_unmap;
 	}
-
 	priv->rtc = rtc;
-	platform_set_drvdata(dev, priv);
 
 	error = sysfs_create_bin_file(&dev->dev.kobj, &priv->nvram_attr);
 	if (error)
@@ -268,6 +268,7 @@ static int __init rp5c01_rtc_probe(struct platform_device *dev)
 out_unregister:
 	rtc_device_unregister(rtc);
 out_unmap:
+	platform_set_drvdata(dev, NULL);
 	iounmap(priv->regs);
 out_free_priv:
 	kfree(priv);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 714964913e5..16512ecae31 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -46,6 +46,7 @@ static struct clk *rtc_clk;
 static void __iomem *s3c_rtc_base;
 static int s3c_rtc_alarmno = NO_IRQ;
 static int s3c_rtc_tickno  = NO_IRQ;
+static bool wake_en;
 static enum s3c_cpu_type s3c_rtc_cpu_type;
 
 static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
@@ -336,7 +337,6 @@ static void s3c_rtc_release(struct device *dev)
 
 	/* do not clear AIE here, it may be needed for wake */
 
-	s3c_rtc_setpie(dev, 0);
 	free_irq(s3c_rtc_alarmno, rtc_dev);
 	free_irq(s3c_rtc_tickno, rtc_dev);
 }
@@ -408,7 +408,6 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev)
 	platform_set_drvdata(dev, NULL);
 	rtc_device_unregister(rtc);
 
-	s3c_rtc_setpie(&dev->dev, 0);
 	s3c_rtc_setaie(&dev->dev, 0);
 
 	clk_disable(rtc_clk);
@@ -564,8 +563,12 @@ static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 	}
 	s3c_rtc_enable(pdev, 0);
 
-	if (device_may_wakeup(&pdev->dev))
-		enable_irq_wake(s3c_rtc_alarmno);
+	if (device_may_wakeup(&pdev->dev) && !wake_en) {
+		if (enable_irq_wake(s3c_rtc_alarmno) == 0)
+			wake_en = true;
+		else
+			dev_err(&pdev->dev, "enable_irq_wake failed\n");
+	}
 
 	return 0;
 }
@@ -581,8 +584,10 @@ static int s3c_rtc_resume(struct platform_device *pdev)
 		writew(tmp | ticnt_en_save, s3c_rtc_base + S3C2410_RTCCON);
 	}
 
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(&pdev->dev) && wake_en) {
 		disable_irq_wake(s3c_rtc_alarmno);
+		wake_en = false;
+	}
 
 	return 0;
 }
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index 9aae49139a0..b00aad2620d 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -573,7 +573,7 @@ static int x1205_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, rtc);
 
-	/* Check for power failures and eventualy enable the osc */
+	/* Check for power failures and eventually enable the osc */
 	if ((err = x1205_get_status(client, &sr)) == 0) {
 		if (sr & X1205_SR_RTCF) {
 			dev_err(&client->dev,
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 4d2df2f76ea..86b6f1cc1b1 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -1742,11 +1742,20 @@ int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr)
 static inline int _dasd_term_running_cqr(struct dasd_device *device)
 {
 	struct dasd_ccw_req *cqr;
+	int rc;
 
 	if (list_empty(&device->ccw_queue))
 		return 0;
 	cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, devlist);
-	return device->discipline->term_IO(cqr);
+	rc = device->discipline->term_IO(cqr);
+	if (!rc)
+		/*
+		 * CQR terminated because a more important request is pending.
+		 * Undo decreasing of retry counter because this is
+		 * not an error case.
+		 */
+		cqr->retries++;
+	return rc;
 }
 
 int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
@@ -2314,15 +2323,14 @@ static void dasd_flush_request_queue(struct dasd_block *block)
 
 static int dasd_open(struct block_device *bdev, fmode_t mode)
 {
-	struct dasd_block *block = bdev->bd_disk->private_data;
 	struct dasd_device *base;
 	int rc;
 
-	if (!block)
+	base = dasd_device_from_gendisk(bdev->bd_disk);
+	if (!base)
 		return -ENODEV;
 
-	base = block->base;
-	atomic_inc(&block->open_count);
+	atomic_inc(&base->block->open_count);
 	if (test_bit(DASD_FLAG_OFFLINE, &base->flags)) {
 		rc = -ENODEV;
 		goto unlock;
@@ -2355,21 +2363,28 @@ static int dasd_open(struct block_device *bdev, fmode_t mode)
 		goto out;
 	}
 
+	dasd_put_device(base);
 	return 0;
 
 out:
 	module_put(base->discipline->owner);
 unlock:
-	atomic_dec(&block->open_count);
+	atomic_dec(&base->block->open_count);
+	dasd_put_device(base);
 	return rc;
 }
 
 static int dasd_release(struct gendisk *disk, fmode_t mode)
 {
-	struct dasd_block *block = disk->private_data;
+	struct dasd_device *base;
 
-	atomic_dec(&block->open_count);
-	module_put(block->base->discipline->owner);
+	base = dasd_device_from_gendisk(disk);
+	if (!base)
+		return -ENODEV;
+
+	atomic_dec(&base->block->open_count);
+	module_put(base->discipline->owner);
+	dasd_put_device(base);
 	return 0;
 }
 
@@ -2378,20 +2393,20 @@ static int dasd_release(struct gendisk *disk, fmode_t mode)
  */
 static int dasd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 {
-	struct dasd_block *block;
 	struct dasd_device *base;
 
-	block = bdev->bd_disk->private_data;
-	if (!block)
+	base = dasd_device_from_gendisk(bdev->bd_disk);
+	if (!base)
 		return -ENODEV;
-	base = block->base;
 
 	if (!base->discipline ||
-	    !base->discipline->fill_geometry)
+	    !base->discipline->fill_geometry) {
+		dasd_put_device(base);
 		return -EINVAL;
-
-	base->discipline->fill_geometry(block, geo);
-	geo->start = get_start_sect(bdev) >> block->s2b_shift;
+	}
+	base->discipline->fill_geometry(base->block, geo);
+	geo->start = get_start_sect(bdev) >> base->block->s2b_shift;
+	dasd_put_device(base);
 	return 0;
 }
 
@@ -2528,7 +2543,6 @@ void dasd_generic_remove(struct ccw_device *cdev)
 	dasd_set_target_state(device, DASD_STATE_NEW);
 	/* dasd_delete_device destroys the device reference. */
 	block = device->block;
-	device->block = NULL;
 	dasd_delete_device(device);
 	/*
 	 * life cycle of block is bound to device, so delete it after
@@ -2650,7 +2664,6 @@ int dasd_generic_set_offline(struct ccw_device *cdev)
 	dasd_set_target_state(device, DASD_STATE_NEW);
 	/* dasd_delete_device destroys the device reference. */
 	block = device->block;
-	device->block = NULL;
 	dasd_delete_device(device);
 	/*
 	 * life cycle of block is bound to device, so delete it after
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 1654a24817b..87a0cf160fe 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -2207,7 +2207,7 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
  * DASD_3990_ERP_CONTROL_CHECK
  *
  * DESCRIPTION
- *   Does a generic inspection if a control check occured and sets up
+ *   Does a generic inspection if a control check occurred and sets up
  *   the related error recovery procedure
  *
  * PARAMETER
@@ -2250,7 +2250,7 @@ dasd_3990_erp_inspect(struct dasd_ccw_req *erp)
 	struct dasd_ccw_req *erp_new = NULL;
 	char *sense;
 
-	/* if this problem occured on an alias retry on base */
+	/* if this problem occurred on an alias retry on base */
 	erp_new = dasd_3990_erp_inspect_alias(erp);
 	if (erp_new)
 		return erp_new;
@@ -2282,7 +2282,7 @@ dasd_3990_erp_inspect(struct dasd_ccw_req *erp)
  * DASD_3990_ERP_ADD_ERP
  *
  * DESCRIPTION
- *   This funtion adds an additional request block (ERP) to the head of
+ *   This function adds an additional request block (ERP) to the head of
  *   the given cqr (or erp).
  *   For a command mode cqr the erp is initialized as an default erp
  *   (retry TIC).
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index cb6a67bc89f..d71511c7850 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -302,7 +302,7 @@ dasd_parse_keyword( char *parsestring ) {
 /*
  * Try to interprete the first element on the comma separated parse string
  * as a device number or a range of devices. If the interpretation is
- * successfull, create the matching dasd_devmap entries and return a pointer
+ * successful, create the matching dasd_devmap entries and return a pointer
  * to the residual string.
  * If interpretation fails or in case of an error, return an error code.
  */
@@ -674,6 +674,36 @@ dasd_device_from_cdev(struct ccw_device *cdev)
 	return device;
 }
 
+void dasd_add_link_to_gendisk(struct gendisk *gdp, struct dasd_device *device)
+{
+	struct dasd_devmap *devmap;
+
+	devmap = dasd_find_busid(dev_name(&device->cdev->dev));
+	if (IS_ERR(devmap))
+		return;
+	spin_lock(&dasd_devmap_lock);
+	gdp->private_data = devmap;
+	spin_unlock(&dasd_devmap_lock);
+}
+
+struct dasd_device *dasd_device_from_gendisk(struct gendisk *gdp)
+{
+	struct dasd_device *device;
+	struct dasd_devmap *devmap;
+
+	if (!gdp->private_data)
+		return NULL;
+	device = NULL;
+	spin_lock(&dasd_devmap_lock);
+	devmap = gdp->private_data;
+	if (devmap && devmap->device) {
+		device = devmap->device;
+		dasd_get_device(device);
+	}
+	spin_unlock(&dasd_devmap_lock);
+	return device;
+}
+
 /*
  * SECTION: files in sysfs
  */
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 29143eda9dd..85dddb1e412 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -239,7 +239,6 @@ static void dasd_ext_handler(unsigned int ext_int_code,
 	addr_t ip;
 	int rc;
 
-	kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++;
 	switch (ext_int_code >> 24) {
 	case DASD_DIAG_CODE_31BIT:
 		ip = (addr_t) param32;
@@ -250,6 +249,7 @@ static void dasd_ext_handler(unsigned int ext_int_code,
 	default:
 		return;
 	}
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++;
 	if (!ip) {		/* no intparm: unsolicited interrupt */
 		DBF_EVENT(DBF_NOTICE, "%s", "caught unsolicited "
 			      "interrupt");
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 459f2cbe80f..3ebdf5f92f8 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2037,7 +2037,7 @@ static void dasd_eckd_check_for_device_change(struct dasd_device *device,
 		return;
 
 	/* summary unit check */
-	if ((sense[7] == 0x0D) &&
+	if ((sense[27] & DASD_SENSE_BIT_0) && (sense[7] == 0x0D) &&
 	    (scsw_dstat(&irb->scsw) & DEV_STAT_UNIT_CHECK)) {
 		dasd_alias_handle_summary_unit_check(device, irb);
 		return;
@@ -2053,7 +2053,8 @@ static void dasd_eckd_check_for_device_change(struct dasd_device *device,
 	/* loss of device reservation is handled via base devices only
 	 * as alias devices may be used with several bases
 	 */
-	if (device->block && (sense[7] == 0x3F) &&
+	if (device->block && (sense[27] & DASD_SENSE_BIT_0) &&
+	    (sense[7] == 0x3F) &&
 	    (scsw_dstat(&irb->scsw) & DEV_STAT_UNIT_CHECK) &&
 	    test_bit(DASD_FLAG_IS_RESERVED, &device->flags)) {
 		if (device->features & DASD_FEATURE_FAILONSLCK)
@@ -2858,7 +2859,7 @@ static struct dasd_ccw_req *dasd_raw_build_cp(struct dasd_device *startdev,
 	/*
 	 * struct PFX_eckd_data has up to 2 byte as extended parameter
 	 * this is needed for write full track and has to be mentioned
-	 * seperately
+	 * separately
 	 * add 8 instead of 2 to keep 8 byte boundary
 	 */
 	pfx_datasize = sizeof(struct PFX_eckd_data) + 8;
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 5505bc07e1e..19a1ff03d65 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -73,7 +73,7 @@ int dasd_gendisk_alloc(struct dasd_block *block)
 	if (base->features & DASD_FEATURE_READONLY ||
 	    test_bit(DASD_FLAG_DEVICE_RO, &base->flags))
 		set_disk_ro(gdp, 1);
-	gdp->private_data = block;
+	dasd_add_link_to_gendisk(gdp, base);
 	gdp->queue = block->request_queue;
 	block->gdp = gdp;
 	set_capacity(block->gdp, 0);
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index df9f6999411..d1e4f2c1264 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -686,6 +686,9 @@ struct dasd_device *dasd_device_from_cdev(struct ccw_device *);
 struct dasd_device *dasd_device_from_cdev_locked(struct ccw_device *);
 struct dasd_device *dasd_device_from_devindex(int);
 
+void dasd_add_link_to_gendisk(struct gendisk *, struct dasd_device *);
+struct dasd_device *dasd_device_from_gendisk(struct gendisk *);
+
 int dasd_parse(void);
 int dasd_busid_known(const char *);
 
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 26075e95b1b..72261e4c516 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -42,16 +42,22 @@ dasd_ioctl_api_version(void __user *argp)
 static int
 dasd_ioctl_enable(struct block_device *bdev)
 {
-	struct dasd_block *block = bdev->bd_disk->private_data;
+	struct dasd_device *base;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
-	dasd_enable_device(block->base);
+	base = dasd_device_from_gendisk(bdev->bd_disk);
+	if (!base)
+		return -ENODEV;
+
+	dasd_enable_device(base);
 	/* Formatting the dasd device can change the capacity. */
 	mutex_lock(&bdev->bd_mutex);
-	i_size_write(bdev->bd_inode, (loff_t)get_capacity(block->gdp) << 9);
+	i_size_write(bdev->bd_inode,
+		     (loff_t)get_capacity(base->block->gdp) << 9);
 	mutex_unlock(&bdev->bd_mutex);
+	dasd_put_device(base);
 	return 0;
 }
 
@@ -62,11 +68,14 @@ dasd_ioctl_enable(struct block_device *bdev)
 static int
 dasd_ioctl_disable(struct block_device *bdev)
 {
-	struct dasd_block *block = bdev->bd_disk->private_data;
+	struct dasd_device *base;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
+	base = dasd_device_from_gendisk(bdev->bd_disk);
+	if (!base)
+		return -ENODEV;
 	/*
 	 * Man this is sick. We don't do a real disable but only downgrade
 	 * the device to DASD_STATE_BASIC. The reason is that dasdfmt uses
@@ -75,7 +84,7 @@ dasd_ioctl_disable(struct block_device *bdev)
 	 * using the BIODASDFMT ioctl. Therefore the correct state for the
 	 * device is DASD_STATE_BASIC that allows to do basic i/o.
 	 */
-	dasd_set_target_state(block->base, DASD_STATE_BASIC);
+	dasd_set_target_state(base, DASD_STATE_BASIC);
 	/*
 	 * Set i_size to zero, since read, write, etc. check against this
 	 * value.
@@ -83,6 +92,7 @@ dasd_ioctl_disable(struct block_device *bdev)
 	mutex_lock(&bdev->bd_mutex);
 	i_size_write(bdev->bd_inode, 0);
 	mutex_unlock(&bdev->bd_mutex);
+	dasd_put_device(base);
 	return 0;
 }
 
@@ -191,26 +201,36 @@ static int dasd_format(struct dasd_block *block, struct format_data_t *fdata)
 static int
 dasd_ioctl_format(struct block_device *bdev, void __user *argp)
 {
-	struct dasd_block *block = bdev->bd_disk->private_data;
+	struct dasd_device *base;
 	struct format_data_t fdata;
+	int rc;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 	if (!argp)
 		return -EINVAL;
-
-	if (block->base->features & DASD_FEATURE_READONLY ||
-	    test_bit(DASD_FLAG_DEVICE_RO, &block->base->flags))
+	base = dasd_device_from_gendisk(bdev->bd_disk);
+	if (!base)
+		return -ENODEV;
+	if (base->features & DASD_FEATURE_READONLY ||
+	    test_bit(DASD_FLAG_DEVICE_RO, &base->flags)) {
+		dasd_put_device(base);
 		return -EROFS;
-	if (copy_from_user(&fdata, argp, sizeof(struct format_data_t)))
+	}
+	if (copy_from_user(&fdata, argp, sizeof(struct format_data_t))) {
+		dasd_put_device(base);
 		return -EFAULT;
+	}
 	if (bdev != bdev->bd_contains) {
 		pr_warning("%s: The specified DASD is a partition and cannot "
 			   "be formatted\n",
-			   dev_name(&block->base->cdev->dev));
+			   dev_name(&base->cdev->dev));
+		dasd_put_device(base);
 		return -EINVAL;
 	}
-	return dasd_format(block, &fdata);
+	rc = dasd_format(base->block, &fdata);
+	dasd_put_device(base);
+	return rc;
 }
 
 #ifdef CONFIG_DASD_PROFILE
@@ -340,8 +360,8 @@ static int dasd_ioctl_information(struct dasd_block *block,
 static int
 dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp)
 {
-	struct dasd_block *block =  bdev->bd_disk->private_data;
-	int intval;
+	struct dasd_device *base;
+	int intval, rc;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
@@ -350,10 +370,17 @@ dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp)
 		return -EINVAL;
 	if (get_user(intval, (int __user *)argp))
 		return -EFAULT;
-	if (!intval && test_bit(DASD_FLAG_DEVICE_RO, &block->base->flags))
+	base = dasd_device_from_gendisk(bdev->bd_disk);
+	if (!base)
+		return -ENODEV;
+	if (!intval && test_bit(DASD_FLAG_DEVICE_RO, &base->flags)) {
+		dasd_put_device(base);
 		return -EROFS;
+	}
 	set_disk_ro(bdev->bd_disk, intval);
-	return dasd_set_feature(block->base->cdev, DASD_FEATURE_READONLY, intval);
+	rc = dasd_set_feature(base->cdev, DASD_FEATURE_READONLY, intval);
+	dasd_put_device(base);
+	return rc;
 }
 
 static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd,
@@ -372,59 +399,78 @@ static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd,
 int dasd_ioctl(struct block_device *bdev, fmode_t mode,
 	       unsigned int cmd, unsigned long arg)
 {
-	struct dasd_block *block = bdev->bd_disk->private_data;
+	struct dasd_block *block;
+	struct dasd_device *base;
 	void __user *argp;
+	int rc;
 
 	if (is_compat_task())
 		argp = compat_ptr(arg);
 	else
 		argp = (void __user *)arg;
 
-	if (!block)
-                return -ENODEV;
-
 	if ((_IOC_DIR(cmd) != _IOC_NONE) && !arg) {
 		PRINT_DEBUG("empty data ptr");
 		return -EINVAL;
 	}
 
+	base = dasd_device_from_gendisk(bdev->bd_disk);
+	if (!base)
+		return -ENODEV;
+	block = base->block;
+	rc = 0;
 	switch (cmd) {
 	case BIODASDDISABLE:
-		return dasd_ioctl_disable(bdev);
+		rc = dasd_ioctl_disable(bdev);
+		break;
 	case BIODASDENABLE:
-		return dasd_ioctl_enable(bdev);
+		rc = dasd_ioctl_enable(bdev);
+		break;
 	case BIODASDQUIESCE:
-		return dasd_ioctl_quiesce(block);
+		rc = dasd_ioctl_quiesce(block);
+		break;
 	case BIODASDRESUME:
-		return dasd_ioctl_resume(block);
+		rc = dasd_ioctl_resume(block);
+		break;
 	case BIODASDFMT:
-		return dasd_ioctl_format(bdev, argp);
+		rc = dasd_ioctl_format(bdev, argp);
+		break;
 	case BIODASDINFO:
-		return dasd_ioctl_information(block, cmd, argp);
+		rc = dasd_ioctl_information(block, cmd, argp);
+		break;
 	case BIODASDINFO2:
-		return dasd_ioctl_information(block, cmd, argp);
+		rc = dasd_ioctl_information(block, cmd, argp);
+		break;
 	case BIODASDPRRD:
-		return dasd_ioctl_read_profile(block, argp);
+		rc = dasd_ioctl_read_profile(block, argp);
+		break;
 	case BIODASDPRRST:
-		return dasd_ioctl_reset_profile(block);
+		rc = dasd_ioctl_reset_profile(block);
+		break;
 	case BLKROSET:
-		return dasd_ioctl_set_ro(bdev, argp);
+		rc = dasd_ioctl_set_ro(bdev, argp);
+		break;
 	case DASDAPIVER:
-		return dasd_ioctl_api_version(argp);
+		rc = dasd_ioctl_api_version(argp);
+		break;
 	case BIODASDCMFENABLE:
-		return enable_cmf(block->base->cdev);
+		rc = enable_cmf(base->cdev);
+		break;
 	case BIODASDCMFDISABLE:
-		return disable_cmf(block->base->cdev);
+		rc = disable_cmf(base->cdev);
+		break;
 	case BIODASDREADALLCMB:
-		return dasd_ioctl_readall_cmb(block, cmd, argp);
+		rc = dasd_ioctl_readall_cmb(block, cmd, argp);
+		break;
 	default:
 		/* if the discipline has an ioctl method try it. */
-		if (block->base->discipline->ioctl) {
-			int rval = block->base->discipline->ioctl(block, cmd, argp);
-			if (rval != -ENOIOCTLCMD)
-				return rval;
-		}
-
-		return -EINVAL;
+		if (base->discipline->ioctl) {
+			rc = base->discipline->ioctl(block, cmd, argp);
+			if (rc == -ENOIOCTLCMD)
+				rc = -EINVAL;
+		} else
+			rc = -EINVAL;
 	}
+	dasd_put_device(base);
+	return rc;
 }
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 4c023761946..e21a5c39ef2 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -604,7 +604,7 @@ __raw3270_size_device(struct raw3270 *rp)
 	/*
 	 * To determine the size of the 3270 device we need to do:
 	 * 1) send a 'read partition' data stream to the device
-	 * 2) wait for the attn interrupt that preceeds the query reply
+	 * 2) wait for the attn interrupt that precedes the query reply
 	 * 3) do a read modified to get the query reply
 	 * To make things worse we have to cope with intervention
 	 * required (3270 device switched to 'stand-by') and command
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 4b60ede07f0..be55fb2b1b1 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -518,6 +518,8 @@ static void __init insert_increment(u16 rn, int standby, int assigned)
 		return;
 	new_incr->rn = rn;
 	new_incr->standby = standby;
+	if (!standby)
+		new_incr->usecount = 1;
 	last_rn = 0;
 	prev = &sclp_mem_list;
 	list_for_each_entry(incr, &sclp_mem_list, list) {
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 83cea9a55e2..1b3924c2fff 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -236,7 +236,6 @@ tapeblock_setup_device(struct tape_device * device)
 	disk->major = tapeblock_major;
 	disk->first_minor = device->first_minor;
 	disk->fops = &tapeblock_fops;
-	disk->events = DISK_EVENT_MEDIA_CHANGE;
 	disk->private_data = tape_get_device(device);
 	disk->queue = blkdat->request_queue;
 	set_capacity(disk, 0);
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index e090a307fde..87cd0ab242d 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -139,7 +139,7 @@ tapechar_read(struct file *filp, char __user *data, size_t count, loff_t *ppos)
 	/*
 	 * If the tape isn't terminated yet, do it now. And since we then
 	 * are at the end of the tape there wouldn't be anything to read
-	 * anyways. So we return immediatly.
+	 * anyways. So we return immediately.
 	 */
 	if(device->required_tapemarks) {
 		return tape_std_terminate_write(device);
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index d33554df2b0..2db1482b406 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -328,7 +328,7 @@ tty3270_write_callback(struct raw3270_request *rq, void *data)
 
 	tp = (struct tty3270 *) rq->view;
 	if (rq->rc != 0) {
-		/* Write wasn't successfull. Refresh all. */
+		/* Write wasn't successful. Refresh all. */
 		tp->update_flags = TTY_UPDATE_ALL;
 		tty3270_set_timer(tp, 1);
 	}
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index df14c51f653..8e04c00cf0a 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -541,15 +541,24 @@ static ssize_t online_store (struct device *dev, struct device_attribute *attr,
 	int force, ret;
 	unsigned long i;
 
-	if (!dev_fsm_final_state(cdev) &&
-	    cdev->private->state != DEV_STATE_DISCONNECTED)
-		return -EAGAIN;
+	/* Prevent conflict between multiple on-/offline processing requests. */
 	if (atomic_cmpxchg(&cdev->private->onoff, 0, 1) != 0)
 		return -EAGAIN;
+	/* Prevent conflict between internal I/Os and on-/offline processing. */
+	if (!dev_fsm_final_state(cdev) &&
+	    cdev->private->state != DEV_STATE_DISCONNECTED) {
+		ret = -EAGAIN;
+		goto out_onoff;
+	}
+	/* Prevent conflict between pending work and on-/offline processing.*/
+	if (work_pending(&cdev->private->todo_work)) {
+		ret = -EAGAIN;
+		goto out_onoff;
+	}
 
 	if (cdev->drv && !try_module_get(cdev->drv->driver.owner)) {
-		atomic_set(&cdev->private->onoff, 0);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_onoff;
 	}
 	if (!strncmp(buf, "force\n", count)) {
 		force = 1;
@@ -574,6 +583,7 @@ static ssize_t online_store (struct device *dev, struct device_attribute *attr,
 out:
 	if (cdev->drv)
 		module_put(cdev->drv->driver.owner);
+out_onoff:
 	atomic_set(&cdev->private->onoff, 0);
 	return (ret < 0) ? ret : count;
 }
@@ -1311,10 +1321,12 @@ static int purge_fn(struct device *dev, void *data)
 
 	spin_lock_irq(cdev->ccwlock);
 	if (is_blacklisted(id->ssid, id->devno) &&
-	    (cdev->private->state == DEV_STATE_OFFLINE)) {
+	    (cdev->private->state == DEV_STATE_OFFLINE) &&
+	    (atomic_cmpxchg(&cdev->private->onoff, 0, 1) == 0)) {
 		CIO_MSG_EVENT(3, "ccw: purging 0.%x.%04x\n", id->ssid,
 			      id->devno);
 		ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
+		atomic_set(&cdev->private->onoff, 0);
 	}
 	spin_unlock_irq(cdev->ccwlock);
 	/* Abort loop in case of pending signal. */
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index a845695ac31..6084103672b 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -318,7 +318,7 @@ ccw_device_sense_id_done(struct ccw_device *cdev, int err)
 
 /**
   * ccw_device_notify() - inform the device's driver about an event
-  * @cdev: device for which an event occured
+  * @cdev: device for which an event occurred
   * @event: event that occurred
   *
   * Returns:
@@ -688,7 +688,7 @@ ccw_device_online_verify(struct ccw_device *cdev, enum dev_event dev_event)
 	    (scsw_stctl(&cdev->private->irb.scsw) & SCSW_STCTL_STATUS_PEND)) {
 		/*
 		 * No final status yet or final status not yet delivered
-		 * to the device driver. Can't do path verfication now,
+		 * to the device driver. Can't do path verification now,
 		 * delay until final status was delivered.
 		 */
 		cdev->private->flags.doverify = 1;
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 479c665e9e7..e8f267eb888 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -407,8 +407,11 @@ static inline void account_sbals(struct qdio_q *q, int count)
 	q->q_stats.nr_sbals[pos]++;
 }
 
-static void announce_buffer_error(struct qdio_q *q, int count)
+static void process_buffer_error(struct qdio_q *q, int count)
 {
+	unsigned char state = (q->is_input_q) ? SLSB_P_INPUT_NOT_INIT :
+					SLSB_P_OUTPUT_NOT_INIT;
+
 	q->qdio_error |= QDIO_ERROR_SLSB_STATE;
 
 	/* special handling for no target buffer empty */
@@ -426,6 +429,12 @@ static void announce_buffer_error(struct qdio_q *q, int count)
 	DBF_ERROR("F14:%2x F15:%2x",
 		  q->sbal[q->first_to_check]->element[14].flags & 0xff,
 		  q->sbal[q->first_to_check]->element[15].flags & 0xff);
+
+	/*
+	 * Interrupts may be avoided as long as the error is present
+	 * so change the buffer state immediately to avoid starvation.
+	 */
+	set_buf_states(q, q->first_to_check, state, count);
 }
 
 static inline void inbound_primed(struct qdio_q *q, int count)
@@ -506,8 +515,7 @@ static int get_inbound_buffer_frontier(struct qdio_q *q)
 			account_sbals(q, count);
 		break;
 	case SLSB_P_INPUT_ERROR:
-		announce_buffer_error(q, count);
-		/* process the buffer, the upper layer will take care of it */
+		process_buffer_error(q, count);
 		q->first_to_check = add_buf(q->first_to_check, count);
 		atomic_sub(count, &q->nr_buf_used);
 		if (q->irq_ptr->perf_stat_enabled)
@@ -677,8 +685,7 @@ static int get_outbound_buffer_frontier(struct qdio_q *q)
 			account_sbals(q, count);
 		break;
 	case SLSB_P_OUTPUT_ERROR:
-		announce_buffer_error(q, count);
-		/* process the buffer, the upper layer will take care of it */
+		process_buffer_error(q, count);
 		q->first_to_check = add_buf(q->first_to_check, count);
 		atomic_sub(count, &q->nr_buf_used);
 		if (q->irq_ptr->perf_stat_enabled)
@@ -1649,26 +1656,26 @@ static int __init init_QDIO(void)
 {
 	int rc;
 
-	rc = qdio_setup_init();
+	rc = qdio_debug_init();
 	if (rc)
 		return rc;
+	rc = qdio_setup_init();
+	if (rc)
+		goto out_debug;
 	rc = tiqdio_allocate_memory();
 	if (rc)
 		goto out_cache;
-	rc = qdio_debug_init();
-	if (rc)
-		goto out_ti;
 	rc = tiqdio_register_thinints();
 	if (rc)
-		goto out_debug;
+		goto out_ti;
 	return 0;
 
-out_debug:
-	qdio_debug_exit();
 out_ti:
 	tiqdio_free_memory();
 out_cache:
 	qdio_setup_exit();
+out_debug:
+	qdio_debug_exit();
 	return rc;
 }
 
@@ -1676,8 +1683,8 @@ static void __exit exit_QDIO(void)
 {
 	tiqdio_unregister_thinints();
 	tiqdio_free_memory();
-	qdio_debug_exit();
 	qdio_setup_exit();
+	qdio_debug_exit();
 }
 
 module_init(init_QDIO);
diff --git a/drivers/s390/crypto/zcrypt_api.h b/drivers/s390/crypto/zcrypt_api.h
index 88ebd114735..9688f3985b0 100644
--- a/drivers/s390/crypto/zcrypt_api.h
+++ b/drivers/s390/crypto/zcrypt_api.h
@@ -76,7 +76,7 @@ struct ica_z90_status {
 
 /**
  * Large random numbers are pulled in 4096 byte chunks from the crypto cards
- * and stored in a page. Be carefull when increasing this buffer due to size
+ * and stored in a page. Be careful when increasing this buffer due to size
  * limitations for AP requests.
  */
 #define ZCRYPT_RNG_BUFFER_SIZE	4096
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 414427d64a8..607998f0b7d 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -381,10 +381,10 @@ static void kvm_extint_handler(unsigned int ext_int_code,
 	u16 subcode;
 	u32 param;
 
-	kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++;
 	subcode = ext_int_code >> 16;
 	if ((subcode & 0xff00) != VIRTIO_SUBCODE_64)
 		return;
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++;
 
 	/* The LSB might be overloaded, we have to mask it */
 	vq = (struct virtqueue *)(param64 & ~1UL);
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index 9feb62febb3..f1fa2483ae6 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -779,7 +779,7 @@ claw_irq_handler(struct ccw_device *cdev,
 	case CLAW_START_WRITE:
 		if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
 			dev_info(&cdev->dev,
-				"%s: Unit Check Occured in "
+				"%s: Unit Check Occurred in "
 				"write channel\n", dev->name);
 			clear_bit(0, (void *)&p_ch->IO_active);
 			if (p_ch->irb->ecw[0] & 0x80) {
@@ -845,12 +845,10 @@ claw_irq_tasklet ( unsigned long data )
 {
 	struct chbk * p_ch;
         struct net_device  *dev;
-        struct claw_privbk *       privptr;
 
 	p_ch = (struct chbk *) data;
         dev = (struct net_device *)p_ch->ndev;
 	CLAW_DBF_TEXT(4, trace, "IRQtask");
-	privptr = (struct claw_privbk *)dev->ml_priv;
         unpack_read(dev);
         clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a);
 	CLAW_DBF_TEXT(4, trace, "TskletXt");
@@ -1026,7 +1024,6 @@ claw_write_next ( struct chbk * p_ch )
         struct net_device  *dev;
         struct claw_privbk *privptr=NULL;
 	struct sk_buff *pk_skb;
-	int	rc;
 
 	CLAW_DBF_TEXT(4, trace, "claw_wrt");
         if (p_ch->claw_state == CLAW_STOP)
@@ -1038,7 +1035,7 @@ claw_write_next ( struct chbk * p_ch )
 	    !skb_queue_empty(&p_ch->collect_queue)) {
 	  	pk_skb = claw_pack_skb(privptr);
 		while (pk_skb != NULL) {
-			rc = claw_hw_tx( pk_skb, dev,1);
+			claw_hw_tx(pk_skb, dev, 1);
 			if (privptr->write_free_count > 0) {
 	   			pk_skb = claw_pack_skb(privptr);
 			} else
@@ -1322,15 +1319,12 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
         unsigned char                   *pDataAddress;
         struct endccw                   *pEnd;
         struct ccw1                     tempCCW;
-        struct chbk                     *p_ch;
 	struct claw_env			*p_env;
-        int                             lock;
 	struct clawph			*pk_head;
 	struct chbk			*ch;
 
 	CLAW_DBF_TEXT(4, trace, "hw_tx");
 	privptr = (struct claw_privbk *)(dev->ml_priv);
-	p_ch = (struct chbk *)&privptr->channel[WRITE_CHANNEL];
 	p_env =privptr->p_env;
 	claw_free_wrt_buf(dev);	/* Clean up free chain if posible */
         /*  scan the write queue to free any completed write packets   */
@@ -1511,12 +1505,6 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
 
         } /* endif (p_first_ccw!=NULL)  */
         dev_kfree_skb_any(skb);
-	if (linkid==0) {
-        	lock=LOCK_NO;
-        }
-        else  {
-                lock=LOCK_YES;
-        }
         claw_strt_out_IO(dev );
         /*      if write free count is zero , set NOBUFFER       */
 	if (privptr->write_free_count==0) {
@@ -2821,15 +2809,11 @@ claw_free_wrt_buf( struct net_device *dev )
 {
 
 	struct claw_privbk *privptr = (struct claw_privbk *)dev->ml_priv;
-        struct ccwbk*p_first_ccw;
-	struct ccwbk*p_last_ccw;
 	struct ccwbk*p_this_ccw;
 	struct ccwbk*p_next_ccw;
 
 	CLAW_DBF_TEXT(4, trace, "freewrtb");
         /*  scan the write queue to free any completed write packets   */
-        p_first_ccw=NULL;
-        p_last_ccw=NULL;
         p_this_ccw=privptr->p_write_active_first;
         while ( (p_this_ccw!=NULL) && (p_this_ccw->header.flag!=CLAW_PENDING))
         {
@@ -3072,7 +3056,7 @@ claw_shutdown_device(struct ccwgroup_device *cgdev)
 {
 	struct claw_privbk *priv;
 	struct net_device *ndev;
-	int	ret;
+	int ret = 0;
 
 	CLAW_DBF_TEXT_(2, setup, "%s", dev_name(&cgdev->dev));
 	priv = dev_get_drvdata(&cgdev->dev);
@@ -3095,7 +3079,7 @@ claw_shutdown_device(struct ccwgroup_device *cgdev)
 	}
 	ccw_device_set_offline(cgdev->cdev[1]);
 	ccw_device_set_offline(cgdev->cdev[0]);
-	return 0;
+	return ret;
 }
 
 static void
diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 8c921fc3511..2d602207541 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -184,7 +184,7 @@ static void ctcmpc_chx_resend(fsm_instance *, int, void *);
 static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg);
 
 /**
- * Check return code of a preceeding ccw_device call, halt_IO etc...
+ * Check return code of a preceding ccw_device call, halt_IO etc...
  *
  * ch	:	The channel, the error belongs to.
  * Returns the error code (!= 0) to inspect.
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index c189296763a..426787efc49 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -672,7 +672,6 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 	int ccw_idx;
 	unsigned long hi;
 	unsigned long saveflags = 0;	/* avoids compiler warning */
-	__u16 block_len;
 
 	CTCM_PR_DEBUG("Enter %s: %s, cp=%i ch=0x%p id=%s state=%s\n",
 			__func__, dev->name, smp_processor_id(), ch,
@@ -719,7 +718,6 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 	 */
 	atomic_inc(&skb->users);
 
-	block_len = skb->len + TH_HEADER_LENGTH + PDU_HEADER_LENGTH;
 	/*
 	 * IDAL support in CTCM is broken, so we have to
 	 * care about skb's above 2G ourselves.
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index b64881f33f2..da4c747335e 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -653,7 +653,6 @@ static void ctcmpc_send_sweep_resp(struct channel *rch)
 	struct net_device *dev = rch->netdev;
 	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
-	int rc = 0;
 	struct th_sweep *header;
 	struct sk_buff *sweep_skb;
 	struct channel *ch  = priv->channel[CTCM_WRITE];
@@ -665,16 +664,14 @@ static void ctcmpc_send_sweep_resp(struct channel *rch)
 		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
 			"%s(%s): sweep_skb allocation ERROR\n",
 			CTCM_FUNTAIL, rch->id);
-		rc = -ENOMEM;
-				goto done;
+		goto done;
 	}
 
 	header = kmalloc(sizeof(struct th_sweep), gfp_type());
 
 	if (!header) {
 		dev_kfree_skb_any(sweep_skb);
-		rc = -ENOMEM;
-				goto done;
+		goto done;
 	}
 
 	header->th.th_seg	= 0x00 ;
@@ -1370,8 +1367,7 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
 	struct net_device  *dev = arg;
 	struct ctcm_priv    *priv;
 	struct mpc_group *grp;
-	int rc = 0;
-	struct channel *wch, *rch;
+	struct channel *wch;
 
 	BUG_ON(dev == NULL);
 	CTCM_PR_DEBUG("Enter %s: %s\n",	__func__, dev->name);
@@ -1396,7 +1392,6 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
 		fsm_deltimer(&priv->restart_timer);
 
 	wch = priv->channel[CTCM_WRITE];
-	rch = priv->channel[CTCM_READ];
 
 	switch (grp->saved_state) {
 	case MPCG_STATE_RESET:
@@ -1435,7 +1430,7 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
 
 	if (grp->send_qllc_disc == 1) {
 		grp->send_qllc_disc = 0;
-		rc = mpc_send_qllc_discontact(dev);
+		mpc_send_qllc_discontact(dev);
 	}
 
 	/* DO NOT issue DEV_EVENT_STOP directly out of this code */
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 7fbc4adbb6d..c3b8064a102 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1123,7 +1123,7 @@ list_modified:
 	list_for_each_entry_safe(ipm, tmp, &card->ipm_list, list){
 		switch (ipm->ipm_state) {
 		case LCS_IPM_STATE_SET_REQUIRED:
-			/* del from ipm_list so noone else can tamper with
+			/* del from ipm_list so no one else can tamper with
 			 * this entry */
 			list_del_init(&ipm->list);
 			spin_unlock_irqrestore(&card->ipm_lock, flags);
@@ -1483,7 +1483,6 @@ lcs_tasklet(unsigned long data)
 	struct lcs_channel *channel;
 	struct lcs_buffer *iob;
 	int buf_idx;
-	int rc;
 
 	channel = (struct lcs_channel *) data;
 	LCS_DBF_TEXT_(5, trace, "tlet%s", dev_name(&channel->ccwdev->dev));
@@ -1500,14 +1499,11 @@ lcs_tasklet(unsigned long data)
 	channel->buf_idx = buf_idx;
 
 	if (channel->state == LCS_CH_STATE_STOPPED)
-		// FIXME: what if rc != 0 ??
-		rc = lcs_start_channel(channel);
+		lcs_start_channel(channel);
 	spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
 	if (channel->state == LCS_CH_STATE_SUSPENDED &&
-	    channel->iob[channel->io_idx].state == LCS_BUF_STATE_READY) {
-		// FIXME: what if rc != 0 ??
-		rc = __lcs_resume_channel(channel);
-	}
+	    channel->iob[channel->io_idx].state == LCS_BUF_STATE_READY)
+		__lcs_resume_channel(channel);
 	spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
 
 	/* Something happened on the channel. Wake up waiters. */
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index b6a6356d09b..3251333a23d 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1994,8 +1994,6 @@ static struct net_device *netiucv_init_netdevice(char *username)
 			   netiucv_setup_netdevice);
 	if (!dev)
 		return NULL;
-	if (dev_alloc_name(dev, dev->name) < 0)
-		goto out_netdev;
 
 	privptr = netdev_priv(dev);
 	privptr->fsm = init_fsm("netiucvdev", dev_state_names,
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index af3f7b09564..55c6aa1c970 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -407,12 +407,6 @@ struct qeth_qdio_q {
 	int next_buf_to_init;
 } __attribute__ ((aligned(256)));
 
-/* possible types of qeth large_send support */
-enum qeth_large_send_types {
-	QETH_LARGE_SEND_NO,
-	QETH_LARGE_SEND_TSO,
-};
-
 struct qeth_qdio_out_buffer {
 	struct qdio_buffer *buffer;
 	atomic_t state;
@@ -637,6 +631,8 @@ struct qeth_card_info {
 	__u32 csum_mask;
 	__u32 tx_csum_mask;
 	enum qeth_ipa_promisc_modes promisc_mode;
+	__u32 diagass_support;
+	__u32 hwtrap;
 };
 
 struct qeth_card_options {
@@ -645,13 +641,11 @@ struct qeth_card_options {
 	struct qeth_ipa_info adp; /*Adapter parameters*/
 	struct qeth_routing_info route6;
 	struct qeth_ipa_info ipa6;
-	enum qeth_checksum_types checksum_type;
 	int broadcast_mode;
 	int macaddr_mode;
 	int fake_broadcast;
 	int add_hhlen;
 	int layer2;
-	enum qeth_large_send_types large_send;
 	int performance_stats;
 	int rx_sg_cb;
 	enum qeth_ipa_isolation_modes isolation;
@@ -760,6 +754,14 @@ struct qeth_card_list_struct {
 	rwlock_t rwlock;
 };
 
+struct qeth_trap_id {
+	__u16 lparnr;
+	char vmname[8];
+	__u8 chpid;
+	__u8 ssid;
+	__u16 devno;
+} __packed;
+
 /*some helper functions*/
 #define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "")
 
@@ -794,6 +796,12 @@ static inline void qeth_put_buffer_pool_entry(struct qeth_card *card,
 	list_add_tail(&entry->list, &card->qdio.in_buf_pool.entry_list);
 }
 
+static inline int qeth_is_diagass_supported(struct qeth_card *card,
+		enum qeth_diags_cmds cmd)
+{
+	return card->info.diagass_support & (__u32)cmd;
+}
+
 extern struct ccwgroup_driver qeth_l2_ccwgroup_driver;
 extern struct ccwgroup_driver qeth_l3_ccwgroup_driver;
 const char *qeth_get_cardname_short(struct qeth_card *);
@@ -879,6 +887,8 @@ void qeth_dbf_longtext(debug_info_t *id, int level, char *text, ...);
 int qeth_core_ethtool_get_settings(struct net_device *, struct ethtool_cmd *);
 int qeth_set_access_ctrl_online(struct qeth_card *card);
 int qeth_hdr_chk_and_bounce(struct sk_buff *, int);
+int qeth_hw_trap(struct qeth_card *, enum qeth_diags_trap_action);
+int qeth_query_ipassists(struct qeth_card *, enum qeth_prot_versions prot);
 
 /* exports for OSN */
 int qeth_osn_assist(struct net_device *, void *, int);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 10a3a3b4dd3..503678a3098 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -24,6 +24,7 @@
 
 #include <asm/ebcdic.h>
 #include <asm/io.h>
+#include <asm/sysinfo.h>
 
 #include "qeth_core.h"
 
@@ -349,6 +350,8 @@ static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card,
 					   card->info.chpid);
 				netif_carrier_on(card->dev);
 				card->lan_online = 1;
+				if (card->info.hwtrap)
+					card->info.hwtrap = 2;
 				qeth_schedule_recovery(card);
 				return NULL;
 			case IPA_CMD_MODCCID:
@@ -1039,7 +1042,6 @@ static void qeth_set_intial_options(struct qeth_card *card)
 {
 	card->options.route4.type = NO_ROUTER;
 	card->options.route6.type = NO_ROUTER;
-	card->options.checksum_type = QETH_CHECKSUM_DEFAULT;
 	card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS;
 	card->options.macaddr_mode = QETH_TR_MACADDR_NONCANONICAL;
 	card->options.fake_broadcast = 0;
@@ -1107,7 +1109,7 @@ static int qeth_setup_card(struct qeth_card *card)
 	INIT_LIST_HEAD(card->ip_tbd_list);
 	INIT_LIST_HEAD(&card->cmd_waiter_list);
 	init_waitqueue_head(&card->wait_q);
-	/* intial options */
+	/* initial options */
 	qeth_set_intial_options(card);
 	/* IP address takeover */
 	INIT_LIST_HEAD(&card->ipato.entries);
@@ -2574,6 +2576,142 @@ int qeth_query_setadapterparms(struct qeth_card *card)
 }
 EXPORT_SYMBOL_GPL(qeth_query_setadapterparms);
 
+static int qeth_query_ipassists_cb(struct qeth_card *card,
+		struct qeth_reply *reply, unsigned long data)
+{
+	struct qeth_ipa_cmd *cmd;
+
+	QETH_DBF_TEXT(SETUP, 2, "qipasscb");
+
+	cmd = (struct qeth_ipa_cmd *) data;
+	if (cmd->hdr.prot_version == QETH_PROT_IPV4) {
+		card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported;
+		card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled;
+	} else {
+		card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported;
+		card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled;
+	}
+	QETH_DBF_TEXT(SETUP, 2, "suppenbl");
+	QETH_DBF_TEXT_(SETUP, 2, "%x", cmd->hdr.ipa_supported);
+	QETH_DBF_TEXT_(SETUP, 2, "%x", cmd->hdr.ipa_enabled);
+	return 0;
+}
+
+int qeth_query_ipassists(struct qeth_card *card, enum qeth_prot_versions prot)
+{
+	int rc;
+	struct qeth_cmd_buffer *iob;
+
+	QETH_DBF_TEXT_(SETUP, 2, "qipassi%i", prot);
+	iob = qeth_get_ipacmd_buffer(card, IPA_CMD_QIPASSIST, prot);
+	rc = qeth_send_ipa_cmd(card, iob, qeth_query_ipassists_cb, NULL);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(qeth_query_ipassists);
+
+static int qeth_query_setdiagass_cb(struct qeth_card *card,
+		struct qeth_reply *reply, unsigned long data)
+{
+	struct qeth_ipa_cmd *cmd;
+	__u16 rc;
+
+	cmd = (struct qeth_ipa_cmd *)data;
+	rc = cmd->hdr.return_code;
+	if (rc)
+		QETH_CARD_TEXT_(card, 2, "diagq:%x", rc);
+	else
+		card->info.diagass_support = cmd->data.diagass.ext;
+	return 0;
+}
+
+static int qeth_query_setdiagass(struct qeth_card *card)
+{
+	struct qeth_cmd_buffer *iob;
+	struct qeth_ipa_cmd    *cmd;
+
+	QETH_DBF_TEXT(SETUP, 2, "qdiagass");
+	iob = qeth_get_ipacmd_buffer(card, IPA_CMD_SET_DIAG_ASS, 0);
+	cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
+	cmd->data.diagass.subcmd_len = 16;
+	cmd->data.diagass.subcmd = QETH_DIAGS_CMD_QUERY;
+	return qeth_send_ipa_cmd(card, iob, qeth_query_setdiagass_cb, NULL);
+}
+
+static void qeth_get_trap_id(struct qeth_card *card, struct qeth_trap_id *tid)
+{
+	unsigned long info = get_zeroed_page(GFP_KERNEL);
+	struct sysinfo_2_2_2 *info222 = (struct sysinfo_2_2_2 *)info;
+	struct sysinfo_3_2_2 *info322 = (struct sysinfo_3_2_2 *)info;
+	struct ccw_dev_id ccwid;
+	int level, rc;
+
+	tid->chpid = card->info.chpid;
+	ccw_device_get_id(CARD_RDEV(card), &ccwid);
+	tid->ssid = ccwid.ssid;
+	tid->devno = ccwid.devno;
+	if (!info)
+		return;
+
+	rc = stsi(NULL, 0, 0, 0);
+	if (rc == -ENOSYS)
+		level = rc;
+	else
+		level = (((unsigned int) rc) >> 28);
+
+	if ((level >= 2) && (stsi(info222, 2, 2, 2) != -ENOSYS))
+		tid->lparnr = info222->lpar_number;
+
+	if ((level >= 3) && (stsi(info322, 3, 2, 2) != -ENOSYS)) {
+		EBCASC(info322->vm[0].name, sizeof(info322->vm[0].name));
+		memcpy(tid->vmname, info322->vm[0].name, sizeof(tid->vmname));
+	}
+	free_page(info);
+	return;
+}
+
+static int qeth_hw_trap_cb(struct qeth_card *card,
+		struct qeth_reply *reply, unsigned long data)
+{
+	struct qeth_ipa_cmd *cmd;
+	__u16 rc;
+
+	cmd = (struct qeth_ipa_cmd *)data;
+	rc = cmd->hdr.return_code;
+	if (rc)
+		QETH_CARD_TEXT_(card, 2, "trapc:%x", rc);
+	return 0;
+}
+
+int qeth_hw_trap(struct qeth_card *card, enum qeth_diags_trap_action action)
+{
+	struct qeth_cmd_buffer *iob;
+	struct qeth_ipa_cmd *cmd;
+
+	QETH_DBF_TEXT(SETUP, 2, "diagtrap");
+	iob = qeth_get_ipacmd_buffer(card, IPA_CMD_SET_DIAG_ASS, 0);
+	cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
+	cmd->data.diagass.subcmd_len = 80;
+	cmd->data.diagass.subcmd = QETH_DIAGS_CMD_TRAP;
+	cmd->data.diagass.type = 1;
+	cmd->data.diagass.action = action;
+	switch (action) {
+	case QETH_DIAGS_TRAP_ARM:
+		cmd->data.diagass.options = 0x0003;
+		cmd->data.diagass.ext = 0x00010000 +
+			sizeof(struct qeth_trap_id);
+		qeth_get_trap_id(card,
+			(struct qeth_trap_id *)cmd->data.diagass.cdata);
+		break;
+	case QETH_DIAGS_TRAP_DISARM:
+		cmd->data.diagass.options = 0x0001;
+		break;
+	case QETH_DIAGS_TRAP_CAPTURE:
+		break;
+	}
+	return qeth_send_ipa_cmd(card, iob, qeth_hw_trap_cb, NULL);
+}
+EXPORT_SYMBOL_GPL(qeth_hw_trap);
+
 int qeth_check_qdio_errors(struct qeth_card *card, struct qdio_buffer *buf,
 		unsigned int qdio_error, const char *dbftext)
 {
@@ -3903,6 +4041,7 @@ MODULE_DEVICE_TABLE(ccw, qeth_ids);
 
 static struct ccw_driver qeth_ccw_driver = {
 	.driver = {
+		.owner = THIS_MODULE,
 		.name = "qeth",
 	},
 	.ids = qeth_ids,
@@ -3984,6 +4123,15 @@ retriable:
 		QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc);
 		goto out;
 	}
+
+	card->options.ipa4.supported_funcs = 0;
+	card->options.adp.supported_funcs = 0;
+	card->info.diagass_support = 0;
+	qeth_query_ipassists(card, QETH_PROT_IPV4);
+	if (qeth_is_supported(card, IPA_SETADAPTERPARMS))
+		qeth_query_setadapterparms(card);
+	if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST))
+		qeth_query_setdiagass(card);
 	return 0;
 out:
 	dev_warn(&card->gdev->dev, "The qeth device driver failed to recover "
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 07d588867b5..e5a9d1c0383 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -80,14 +80,6 @@ enum qeth_tr_broadcast_modes {
 	QETH_TR_BROADCAST_LOCAL    = 1,
 };
 
-/* these values match CHECKSUM_* in include/linux/skbuff.h */
-enum qeth_checksum_types {
-	SW_CHECKSUMMING = 0, /* TODO: set to bit flag used in IPA Command */
-	HW_CHECKSUMMING = 1,
-	NO_CHECKSUMMING = 2,
-};
-#define QETH_CHECKSUM_DEFAULT SW_CHECKSUMMING
-
 /*
  * Routing stuff
  */
@@ -456,6 +448,12 @@ enum qeth_diags_trace_cmds {
 	QETH_DIAGS_CMD_TRACE_QUERY	= 0x0010,
 };
 
+enum qeth_diags_trap_action {
+	QETH_DIAGS_TRAP_ARM	= 0x01,
+	QETH_DIAGS_TRAP_DISARM	= 0x02,
+	QETH_DIAGS_TRAP_CAPTURE = 0x04,
+};
+
 struct qeth_ipacmd_diagass {
 	__u32  host_tod2;
 	__u32:32;
@@ -465,7 +463,8 @@ struct qeth_ipacmd_diagass {
 	__u8   type;
 	__u8   action;
 	__u16  options;
-	__u32:32;
+	__u32  ext;
+	__u8   cdata[64];
 } __attribute__ ((packed));
 
 /* Header for each IPA command */
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index b5e967cf7e2..0a8e86c1b0e 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -530,6 +530,66 @@ out:
 static DEVICE_ATTR(isolation, 0644, qeth_dev_isolation_show,
 		   qeth_dev_isolation_store);
 
+static ssize_t qeth_hw_trap_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct qeth_card *card = dev_get_drvdata(dev);
+
+	if (!card)
+		return -EINVAL;
+	if (card->info.hwtrap)
+		return snprintf(buf, 5, "arm\n");
+	else
+		return snprintf(buf, 8, "disarm\n");
+}
+
+static ssize_t qeth_hw_trap_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct qeth_card *card = dev_get_drvdata(dev);
+	int rc = 0;
+	char *tmp, *curtoken;
+	int state = 0;
+	curtoken = (char *)buf;
+
+	if (!card)
+		return -EINVAL;
+
+	mutex_lock(&card->conf_mutex);
+	if (card->state == CARD_STATE_SOFTSETUP || card->state == CARD_STATE_UP)
+		state = 1;
+	tmp = strsep(&curtoken, "\n");
+
+	if (!strcmp(tmp, "arm") && !card->info.hwtrap) {
+		if (state) {
+			if (qeth_is_diagass_supported(card,
+			    QETH_DIAGS_CMD_TRAP)) {
+				rc = qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM);
+				if (!rc)
+					card->info.hwtrap = 1;
+			} else
+				rc = -EINVAL;
+		} else
+			card->info.hwtrap = 1;
+	} else if (!strcmp(tmp, "disarm") && card->info.hwtrap) {
+		if (state) {
+			rc = qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
+			if (!rc)
+				card->info.hwtrap = 0;
+		} else
+			card->info.hwtrap = 0;
+	} else if (!strcmp(tmp, "trap") && state && card->info.hwtrap)
+		rc = qeth_hw_trap(card, QETH_DIAGS_TRAP_CAPTURE);
+	else
+		rc = -EINVAL;
+
+	mutex_unlock(&card->conf_mutex);
+	return rc ? rc : count;
+}
+
+static DEVICE_ATTR(hw_trap, 0644, qeth_hw_trap_show,
+		   qeth_hw_trap_store);
+
 static ssize_t qeth_dev_blkt_show(char *buf, struct qeth_card *card, int value)
 {
 
@@ -653,6 +713,7 @@ static struct attribute *qeth_device_attrs[] = {
 	&dev_attr_performance_stats.attr,
 	&dev_attr_layer2.attr,
 	&dev_attr_isolation.attr,
+	&dev_attr_hw_trap.attr,
 	NULL,
 };
 
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 6fbaacb2194..b70b47fbd6c 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -420,10 +420,7 @@ static int qeth_l2_process_inbound_buffer(struct qeth_card *card,
 		case QETH_HEADER_TYPE_LAYER2:
 			skb->pkt_type = PACKET_HOST;
 			skb->protocol = eth_type_trans(skb, skb->dev);
-			if (card->options.checksum_type == NO_CHECKSUMMING)
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
-			else
-				skb->ip_summed = CHECKSUM_NONE;
+			skb->ip_summed = CHECKSUM_NONE;
 			if (skb->protocol == htons(ETH_P_802_2))
 				*((__u32 *)skb->cb) = ++card->seqno.pkt_seqno;
 			len = skb->len;
@@ -879,6 +876,7 @@ static int qeth_l2_probe_device(struct ccwgroup_device *gdev)
 	INIT_LIST_HEAD(&card->vid_list);
 	INIT_LIST_HEAD(&card->mc_list);
 	card->options.layer2 = 1;
+	card->info.hwtrap = 0;
 	card->discipline.start_poll = qeth_qdio_start_poll;
 	card->discipline.input_handler = (qdio_handler_t *)
 		qeth_qdio_input_handler;
@@ -997,6 +995,13 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 	if (card->info.type != QETH_CARD_TYPE_OSN)
 		qeth_l2_send_setmac(card, &card->dev->dev_addr[0]);
 
+	if (qeth_is_diagass_supported(card, QETH_DIAGS_CMD_TRAP)) {
+		if (card->info.hwtrap &&
+		    qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM))
+			card->info.hwtrap = 0;
+	} else
+		card->info.hwtrap = 0;
+
 	card->state = CARD_STATE_HARDSETUP;
 	memset(&card->rx, 0, sizeof(struct qeth_rx));
 	qeth_print_status_message(card);
@@ -1095,6 +1100,10 @@ static int __qeth_l2_set_offline(struct ccwgroup_device *cgdev,
 	if (card->dev && netif_carrier_ok(card->dev))
 		netif_carrier_off(card->dev);
 	recover_flag = card->state;
+	if ((!recovery_mode && card->info.hwtrap) || card->info.hwtrap == 2) {
+		qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
+		card->info.hwtrap = 1;
+	}
 	qeth_l2_stop_card(card, recovery_mode);
 	rc  = ccw_device_set_offline(CARD_DDEV(card));
 	rc2 = ccw_device_set_offline(CARD_WDEV(card));
@@ -1160,6 +1169,8 @@ static void __exit qeth_l2_exit(void)
 static void qeth_l2_shutdown(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if ((gdev->state == CCWGROUP_ONLINE) && card->info.hwtrap)
+		qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
 	qeth_qdio_clear_card(card, 0);
 	qeth_clear_qdio_buffers(card);
 }
@@ -1175,6 +1186,8 @@ static int qeth_l2_pm_suspend(struct ccwgroup_device *gdev)
 	if (gdev->state == CCWGROUP_OFFLINE)
 		return 0;
 	if (card->state == CARD_STATE_UP) {
+		if (card->info.hwtrap)
+			qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
 		__qeth_l2_set_offline(card->gdev, 1);
 	} else
 		__qeth_l2_set_offline(card->gdev, 0);
diff --git a/drivers/s390/net/qeth_l3.h b/drivers/s390/net/qeth_l3.h
index e705b27ec7d..14a43aeb0c2 100644
--- a/drivers/s390/net/qeth_l3.h
+++ b/drivers/s390/net/qeth_l3.h
@@ -62,8 +62,6 @@ void qeth_l3_del_vipa(struct qeth_card *, enum qeth_prot_versions, const u8 *);
 int qeth_l3_add_rxip(struct qeth_card *, enum qeth_prot_versions, const u8 *);
 void qeth_l3_del_rxip(struct qeth_card *card, enum qeth_prot_versions,
 			const u8 *);
-int qeth_l3_set_large_send(struct qeth_card *, enum qeth_large_send_types);
-int qeth_l3_set_rx_csum(struct qeth_card *, enum qeth_checksum_types);
 int qeth_l3_is_addr_covered_by_ipato(struct qeth_card *, struct qeth_ipaddr *);
 
 #endif /* __QETH_L3_H__ */
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 142e5f6ef4f..fd69da3fa6b 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -43,33 +43,6 @@ static int qeth_l3_deregister_addr_entry(struct qeth_card *,
 static int __qeth_l3_set_online(struct ccwgroup_device *, int);
 static int __qeth_l3_set_offline(struct ccwgroup_device *, int);
 
-int qeth_l3_set_large_send(struct qeth_card *card,
-		enum qeth_large_send_types type)
-{
-	int rc = 0;
-
-	card->options.large_send = type;
-	if (card->dev == NULL)
-		return 0;
-
-	if (card->options.large_send == QETH_LARGE_SEND_TSO) {
-		if (qeth_is_supported(card, IPA_OUTBOUND_TSO)) {
-			card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
-					NETIF_F_IP_CSUM;
-		} else {
-			card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
-					NETIF_F_IP_CSUM);
-			card->options.large_send = QETH_LARGE_SEND_NO;
-			rc = -EOPNOTSUPP;
-		}
-	} else {
-		card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
-					NETIF_F_IP_CSUM);
-		card->options.large_send = QETH_LARGE_SEND_NO;
-	}
-	return rc;
-}
-
 static int qeth_l3_isxdigit(char *buf)
 {
 	while (*buf) {
@@ -1304,39 +1277,6 @@ static int qeth_l3_start_ipa_multicast(struct qeth_card *card)
 	return rc;
 }
 
-static int qeth_l3_query_ipassists_cb(struct qeth_card *card,
-		struct qeth_reply *reply, unsigned long data)
-{
-	struct qeth_ipa_cmd *cmd;
-
-	QETH_DBF_TEXT(SETUP, 2, "qipasscb");
-
-	cmd = (struct qeth_ipa_cmd *) data;
-	if (cmd->hdr.prot_version == QETH_PROT_IPV4) {
-		card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported;
-		card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled;
-	} else {
-		card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported;
-		card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled;
-	}
-	QETH_DBF_TEXT(SETUP, 2, "suppenbl");
-	QETH_DBF_TEXT_(SETUP, 2, "%x", cmd->hdr.ipa_supported);
-	QETH_DBF_TEXT_(SETUP, 2, "%x", cmd->hdr.ipa_enabled);
-	return 0;
-}
-
-static int qeth_l3_query_ipassists(struct qeth_card *card,
-				enum qeth_prot_versions prot)
-{
-	int rc;
-	struct qeth_cmd_buffer *iob;
-
-	QETH_DBF_TEXT_(SETUP, 2, "qipassi%i", prot);
-	iob = qeth_get_ipacmd_buffer(card, IPA_CMD_QIPASSIST, prot);
-	rc = qeth_send_ipa_cmd(card, iob, qeth_l3_query_ipassists_cb, NULL);
-	return rc;
-}
-
 #ifdef CONFIG_QETH_IPV6
 static int qeth_l3_softsetup_ipv6(struct qeth_card *card)
 {
@@ -1347,7 +1287,7 @@ static int qeth_l3_softsetup_ipv6(struct qeth_card *card)
 	if (card->info.type == QETH_CARD_TYPE_IQD)
 		goto out;
 
-	rc = qeth_l3_query_ipassists(card, QETH_PROT_IPV6);
+	rc = qeth_query_ipassists(card, QETH_PROT_IPV6);
 	if (rc) {
 		dev_err(&card->gdev->dev,
 			"Activating IPv6 support for %s failed\n",
@@ -1472,68 +1412,38 @@ static int qeth_l3_send_checksum_command(struct qeth_card *card)
 	return 0;
 }
 
-int qeth_l3_set_rx_csum(struct qeth_card *card,
-	enum qeth_checksum_types csum_type)
+int qeth_l3_set_rx_csum(struct qeth_card *card, int on)
 {
 	int rc = 0;
 
-	if (card->options.checksum_type == HW_CHECKSUMMING) {
-		if ((csum_type != HW_CHECKSUMMING) &&
-			(card->state != CARD_STATE_DOWN)) {
-			rc = qeth_l3_send_simple_setassparms(card,
-				IPA_INBOUND_CHECKSUM, IPA_CMD_ASS_STOP, 0);
-			if (rc)
-				return -EIO;
-		}
+	if (on) {
+		rc = qeth_l3_send_checksum_command(card);
+		if (rc)
+			return -EIO;
+		dev_info(&card->gdev->dev,
+			"HW Checksumming (inbound) enabled\n");
 	} else {
-		if (csum_type == HW_CHECKSUMMING) {
-			if (card->state != CARD_STATE_DOWN) {
-				if (!qeth_is_supported(card,
-				    IPA_INBOUND_CHECKSUM))
-					return -EPERM;
-				rc = qeth_l3_send_checksum_command(card);
-				if (rc)
-					return -EIO;
-			}
-		}
+		rc = qeth_l3_send_simple_setassparms(card,
+			IPA_INBOUND_CHECKSUM, IPA_CMD_ASS_STOP, 0);
+		if (rc)
+			return -EIO;
 	}
-	card->options.checksum_type = csum_type;
-	return rc;
+
+	return 0;
 }
 
 static int qeth_l3_start_ipa_checksum(struct qeth_card *card)
 {
-	int rc = 0;
-
 	QETH_CARD_TEXT(card, 3, "strtcsum");
 
-	if (card->options.checksum_type == NO_CHECKSUMMING) {
-		dev_info(&card->gdev->dev,
-			"Using no checksumming on %s.\n",
-			QETH_CARD_IFNAME(card));
-		return 0;
-	}
-	if (card->options.checksum_type == SW_CHECKSUMMING) {
-		dev_info(&card->gdev->dev,
-			"Using SW checksumming on %s.\n",
-			QETH_CARD_IFNAME(card));
-		return 0;
-	}
-	if (!qeth_is_supported(card, IPA_INBOUND_CHECKSUM)) {
-		dev_info(&card->gdev->dev,
-			"Inbound HW Checksumming not "
-			"supported on %s,\ncontinuing "
-			"using Inbound SW Checksumming\n",
-			QETH_CARD_IFNAME(card));
-		card->options.checksum_type = SW_CHECKSUMMING;
-		return 0;
+	if (card->dev->features & NETIF_F_RXCSUM) {
+		rtnl_lock();
+		/* force set_features call */
+		card->dev->features &= ~NETIF_F_RXCSUM;
+		netdev_update_features(card->dev);
+		rtnl_unlock();
 	}
-	rc = qeth_l3_send_checksum_command(card);
-	if (!rc)
-		dev_info(&card->gdev->dev,
-			"HW Checksumming (inbound) enabled\n");
-
-	return rc;
+	return 0;
 }
 
 static int qeth_l3_start_ipa_tx_checksum(struct qeth_card *card)
@@ -1580,10 +1490,8 @@ static int qeth_l3_start_ipa_tso(struct qeth_card *card)
 			dev_info(&card->gdev->dev,
 				"Outbound TSO enabled\n");
 	}
-	if (rc && (card->options.large_send == QETH_LARGE_SEND_TSO)) {
-		card->options.large_send = QETH_LARGE_SEND_NO;
-		card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG);
-	}
+	if (rc)
+		card->dev->features &= ~NETIF_F_TSO;
 	return rc;
 }
 
@@ -2064,14 +1972,7 @@ static inline int qeth_l3_rebuild_skb(struct qeth_card *card,
 		is_vlan = 1;
 	}
 
-	switch (card->options.checksum_type) {
-	case SW_CHECKSUMMING:
-		skb->ip_summed = CHECKSUM_NONE;
-		break;
-	case NO_CHECKSUMMING:
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-		break;
-	case HW_CHECKSUMMING:
+	if (card->dev->features & NETIF_F_RXCSUM) {
 		if ((hdr->hdr.l3.ext_flags &
 		    (QETH_HDR_EXT_CSUM_HDR_REQ |
 		     QETH_HDR_EXT_CSUM_TRANSP_REQ)) ==
@@ -2080,7 +1981,8 @@ static inline int qeth_l3_rebuild_skb(struct qeth_card *card,
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		else
 			skb->ip_summed = CHECKSUM_NONE;
-	}
+	} else
+		skb->ip_summed = CHECKSUM_NONE;
 
 	return is_vlan;
 }
@@ -3024,7 +2926,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct qeth_qdio_out_q *queue = card->qdio.out_qs
 		[qeth_get_priority_queue(card, skb, ipv, cast_type)];
 	int tx_bytes = skb->len;
-	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
+	bool large_send;
 	int data_offset = -1;
 	int nr_frags;
 
@@ -3046,8 +2948,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		card->perf_stats.outbound_start_time = qeth_get_micros();
 	}
 
-	if (skb_is_gso(skb))
-		large_send = card->options.large_send;
+	large_send = skb_is_gso(skb);
 
 	if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
 	    (skb_shinfo(skb)->nr_frags == 0)) {
@@ -3096,7 +2997,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* fix hardware limitation: as long as we do not have sbal
 	 * chaining we can not send long frag lists
 	 */
-	if (large_send == QETH_LARGE_SEND_TSO) {
+	if (large_send) {
 		if (qeth_l3_tso_elements(new_skb) + 1 > 16) {
 			if (skb_linearize(new_skb))
 				goto tx_drop;
@@ -3105,8 +3006,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 	}
 
-	if ((large_send == QETH_LARGE_SEND_TSO) &&
-	    (cast_type == RTN_UNSPEC)) {
+	if (large_send && (cast_type == RTN_UNSPEC)) {
 		hdr = (struct qeth_hdr *)skb_push(new_skb,
 						sizeof(struct qeth_hdr_tso));
 		memset(hdr, 0, sizeof(struct qeth_hdr_tso));
@@ -3141,7 +3041,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (card->info.type != QETH_CARD_TYPE_IQD) {
 		int len;
-		if (large_send == QETH_LARGE_SEND_TSO)
+		if (large_send)
 			len = ((unsigned long)tcp_hdr(new_skb) +
 				tcp_hdr(new_skb)->doff * 4) -
 				(unsigned long)new_skb->data;
@@ -3162,7 +3062,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (new_skb != skb)
 			dev_kfree_skb_any(skb);
 		if (card->options.performance_stats) {
-			if (large_send != QETH_LARGE_SEND_NO) {
+			if (large_send) {
 				card->perf_stats.large_send_bytes += tx_bytes;
 				card->perf_stats.large_send_cnt++;
 			}
@@ -3248,65 +3148,42 @@ static int qeth_l3_stop(struct net_device *dev)
 	return 0;
 }
 
-static u32 qeth_l3_ethtool_get_rx_csum(struct net_device *dev)
+static u32 qeth_l3_fix_features(struct net_device *dev, u32 features)
 {
 	struct qeth_card *card = dev->ml_priv;
 
-	return (card->options.checksum_type == HW_CHECKSUMMING);
-}
-
-static int qeth_l3_ethtool_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct qeth_card *card = dev->ml_priv;
-	enum qeth_checksum_types csum_type;
-
-	if (data)
-		csum_type = HW_CHECKSUMMING;
-	else
-		csum_type = SW_CHECKSUMMING;
+	if (!qeth_is_supported(card, IPA_OUTBOUND_CHECKSUM))
+		features &= ~NETIF_F_IP_CSUM;
+	if (!qeth_is_supported(card, IPA_OUTBOUND_TSO))
+		features &= ~NETIF_F_TSO;
+	if (!qeth_is_supported(card, IPA_INBOUND_CHECKSUM))
+		features &= ~NETIF_F_RXCSUM;
 
-	return qeth_l3_set_rx_csum(card, csum_type);
+	return features;
 }
 
-static int qeth_l3_ethtool_set_tso(struct net_device *dev, u32 data)
+static int qeth_l3_set_features(struct net_device *dev, u32 features)
 {
 	struct qeth_card *card = dev->ml_priv;
-	int rc = 0;
+	u32 changed = dev->features ^ features;
+	int err;
 
-	if (data) {
-		rc = qeth_l3_set_large_send(card, QETH_LARGE_SEND_TSO);
-	} else {
-		dev->features &= ~NETIF_F_TSO;
-		card->options.large_send = QETH_LARGE_SEND_NO;
-	}
-	return rc;
-}
+	if (!(changed & NETIF_F_RXCSUM))
+		return 0;
 
-static int qeth_l3_ethtool_set_tx_csum(struct net_device *dev, u32 data)
-{
-	struct qeth_card *card = dev->ml_priv;
+	if (card->state == CARD_STATE_DOWN ||
+	    card->state == CARD_STATE_RECOVER)
+		return 0;
 
-	if (data) {
-		if (qeth_is_supported(card, IPA_OUTBOUND_CHECKSUM))
-			dev->features |= NETIF_F_IP_CSUM;
-		else
-			return -EPERM;
-	} else
-		dev->features &= ~NETIF_F_IP_CSUM;
+	err = qeth_l3_set_rx_csum(card, features & NETIF_F_RXCSUM);
+	if (err)
+		dev->features = features ^ NETIF_F_RXCSUM;
 
-	return 0;
+	return err;
 }
 
 static const struct ethtool_ops qeth_l3_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = qeth_l3_ethtool_set_tx_csum,
-	.get_rx_csum = qeth_l3_ethtool_get_rx_csum,
-	.set_rx_csum = qeth_l3_ethtool_set_rx_csum,
-	.get_sg      = ethtool_op_get_sg,
-	.set_sg      = ethtool_op_set_sg,
-	.get_tso     = ethtool_op_get_tso,
-	.set_tso     = qeth_l3_ethtool_set_tso,
 	.get_strings = qeth_core_get_strings,
 	.get_ethtool_stats = qeth_core_get_ethtool_stats,
 	.get_sset_count = qeth_core_get_sset_count,
@@ -3347,6 +3224,8 @@ static const struct net_device_ops qeth_l3_netdev_ops = {
 	.ndo_set_multicast_list = qeth_l3_set_multicast_list,
 	.ndo_do_ioctl	   	= qeth_l3_do_ioctl,
 	.ndo_change_mtu	   	= qeth_change_mtu,
+	.ndo_fix_features   	= qeth_l3_fix_features,
+	.ndo_set_features   	= qeth_l3_set_features,
 	.ndo_vlan_rx_register	= qeth_l3_vlan_rx_register,
 	.ndo_vlan_rx_add_vid	= qeth_l3_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid   = qeth_l3_vlan_rx_kill_vid,
@@ -3362,6 +3241,8 @@ static const struct net_device_ops qeth_l3_osa_netdev_ops = {
 	.ndo_set_multicast_list = qeth_l3_set_multicast_list,
 	.ndo_do_ioctl	   	= qeth_l3_do_ioctl,
 	.ndo_change_mtu	   	= qeth_change_mtu,
+	.ndo_fix_features   	= qeth_l3_fix_features,
+	.ndo_set_features   	= qeth_l3_set_features,
 	.ndo_vlan_rx_register	= qeth_l3_vlan_rx_register,
 	.ndo_vlan_rx_add_vid	= qeth_l3_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid   = qeth_l3_vlan_rx_kill_vid,
@@ -3392,8 +3273,12 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 			if (!(card->info.unique_id & UNIQUE_ID_NOT_BY_CARD))
 				card->dev->dev_id = card->info.unique_id &
 							 0xffff;
-			if (!card->info.guestlan)
-				card->dev->features |= NETIF_F_GRO;
+			if (!card->info.guestlan) {
+				card->dev->hw_features = NETIF_F_SG |
+					NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
+					NETIF_F_TSO;
+				card->dev->features = NETIF_F_RXCSUM;
+			}
 		}
 	} else if (card->info.type == QETH_CARD_TYPE_IQD) {
 		card->dev = alloc_netdev(0, "hsi%d", ether_setup);
@@ -3426,15 +3311,13 @@ static int qeth_l3_probe_device(struct ccwgroup_device *gdev)
 
 	qeth_l3_create_device_attributes(&gdev->dev);
 	card->options.layer2 = 0;
+	card->info.hwtrap = 0;
 	card->discipline.start_poll = qeth_qdio_start_poll;
 	card->discipline.input_handler = (qdio_handler_t *)
 		qeth_qdio_input_handler;
 	card->discipline.output_handler = (qdio_handler_t *)
 		qeth_qdio_output_handler;
 	card->discipline.recover = qeth_l3_recover;
-	if ((card->info.type == QETH_CARD_TYPE_OSD) ||
-	    (card->info.type == QETH_CARD_TYPE_OSX))
-		card->options.checksum_type = HW_CHECKSUMMING;
 	return 0;
 }
 
@@ -3480,13 +3363,18 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 		goto out_remove;
 	}
 
-	qeth_l3_query_ipassists(card, QETH_PROT_IPV4);
-
 	if (!card->dev && qeth_l3_setup_netdev(card)) {
 		rc = -ENODEV;
 		goto out_remove;
 	}
 
+	if (qeth_is_diagass_supported(card, QETH_DIAGS_CMD_TRAP)) {
+		if (card->info.hwtrap &&
+		    qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM))
+			card->info.hwtrap = 0;
+	} else
+		card->info.hwtrap = 0;
+
 	card->state = CARD_STATE_HARDSETUP;
 	memset(&card->rx, 0, sizeof(struct qeth_rx));
 	qeth_print_status_message(card);
@@ -3516,7 +3404,6 @@ contin:
 		rc = qeth_l3_start_ipassists(card);
 		if (rc)
 			QETH_DBF_TEXT_(SETUP, 2, "3err%d", rc);
-		qeth_l3_set_large_send(card, card->options.large_send);
 		rc = qeth_l3_setrouting_v4(card);
 		if (rc)
 			QETH_DBF_TEXT_(SETUP, 2, "4err%d", rc);
@@ -3589,6 +3476,10 @@ static int __qeth_l3_set_offline(struct ccwgroup_device *cgdev,
 	if (card->dev && netif_carrier_ok(card->dev))
 		netif_carrier_off(card->dev);
 	recover_flag = card->state;
+	if ((!recovery_mode && card->info.hwtrap) || card->info.hwtrap == 2) {
+		qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
+		card->info.hwtrap = 1;
+	}
 	qeth_l3_stop_card(card, recovery_mode);
 	rc  = ccw_device_set_offline(CARD_DDEV(card));
 	rc2 = ccw_device_set_offline(CARD_WDEV(card));
@@ -3644,6 +3535,8 @@ static int qeth_l3_recover(void *ptr)
 static void qeth_l3_shutdown(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if ((gdev->state == CCWGROUP_ONLINE) && card->info.hwtrap)
+		qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
 	qeth_qdio_clear_card(card, 0);
 	qeth_clear_qdio_buffers(card);
 }
@@ -3659,6 +3552,8 @@ static int qeth_l3_pm_suspend(struct ccwgroup_device *gdev)
 	if (gdev->state == CCWGROUP_OFFLINE)
 		return 0;
 	if (card->state == CARD_STATE_UP) {
+		if (card->info.hwtrap)
+			qeth_hw_trap(card, QETH_DIAGS_TRAP_DISARM);
 		__qeth_l3_set_offline(card->gdev, 1);
 	} else
 		__qeth_l3_set_offline(card->gdev, 0);
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index 67cfa68dcf1..cd99210296e 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -15,16 +15,6 @@
 #define QETH_DEVICE_ATTR(_id, _name, _mode, _show, _store) \
 struct device_attribute dev_attr_##_id = __ATTR(_name, _mode, _show, _store)
 
-static const char *qeth_l3_get_checksum_str(struct qeth_card *card)
-{
-	if (card->options.checksum_type == SW_CHECKSUMMING)
-		return "sw";
-	else if (card->options.checksum_type == HW_CHECKSUMMING)
-		return "hw";
-	else
-		return "no";
-}
-
 static ssize_t qeth_l3_dev_route_show(struct qeth_card *card,
 			struct qeth_routing_info *route, char *buf)
 {
@@ -295,51 +285,6 @@ out:
 static DEVICE_ATTR(canonical_macaddr, 0644, qeth_l3_dev_canonical_macaddr_show,
 		   qeth_l3_dev_canonical_macaddr_store);
 
-static ssize_t qeth_l3_dev_checksum_show(struct device *dev,
-			struct device_attribute *attr, char *buf)
-{
-	struct qeth_card *card = dev_get_drvdata(dev);
-
-	if (!card)
-		return -EINVAL;
-
-	return sprintf(buf, "%s checksumming\n",
-			qeth_l3_get_checksum_str(card));
-}
-
-static ssize_t qeth_l3_dev_checksum_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct qeth_card *card = dev_get_drvdata(dev);
-	enum qeth_checksum_types csum_type;
-	char *tmp;
-	int rc = 0;
-
-	if (!card)
-		return -EINVAL;
-
-	mutex_lock(&card->conf_mutex);
-	tmp = strsep((char **) &buf, "\n");
-	if (!strcmp(tmp, "sw_checksumming"))
-		csum_type = SW_CHECKSUMMING;
-	else if (!strcmp(tmp, "hw_checksumming"))
-		csum_type = HW_CHECKSUMMING;
-	else if (!strcmp(tmp, "no_checksumming"))
-		csum_type = NO_CHECKSUMMING;
-	else {
-		rc = -EINVAL;
-		goto out;
-	}
-
-	rc = qeth_l3_set_rx_csum(card, csum_type);
-out:
-	mutex_unlock(&card->conf_mutex);
-	return rc ? rc : count;
-}
-
-static DEVICE_ATTR(checksumming, 0644, qeth_l3_dev_checksum_show,
-		qeth_l3_dev_checksum_store);
-
 static ssize_t qeth_l3_dev_sniffer_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -402,61 +347,13 @@ out:
 static DEVICE_ATTR(sniffer, 0644, qeth_l3_dev_sniffer_show,
 		qeth_l3_dev_sniffer_store);
 
-static ssize_t qeth_l3_dev_large_send_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct qeth_card *card = dev_get_drvdata(dev);
-
-	if (!card)
-		return -EINVAL;
-
-	switch (card->options.large_send) {
-	case QETH_LARGE_SEND_NO:
-		return sprintf(buf, "%s\n", "no");
-	case QETH_LARGE_SEND_TSO:
-		return sprintf(buf, "%s\n", "TSO");
-	default:
-		return sprintf(buf, "%s\n", "N/A");
-	}
-}
-
-static ssize_t qeth_l3_dev_large_send_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct qeth_card *card = dev_get_drvdata(dev);
-	enum qeth_large_send_types type;
-	int rc = 0;
-	char *tmp;
-
-	if (!card)
-		return -EINVAL;
-	tmp = strsep((char **) &buf, "\n");
-	if (!strcmp(tmp, "no"))
-		type = QETH_LARGE_SEND_NO;
-	else if (!strcmp(tmp, "TSO"))
-		type = QETH_LARGE_SEND_TSO;
-	else
-		return -EINVAL;
-
-	mutex_lock(&card->conf_mutex);
-	if (card->options.large_send != type)
-		rc = qeth_l3_set_large_send(card, type);
-	mutex_unlock(&card->conf_mutex);
-	return rc ? rc : count;
-}
-
-static DEVICE_ATTR(large_send, 0644, qeth_l3_dev_large_send_show,
-		   qeth_l3_dev_large_send_store);
-
 static struct attribute *qeth_l3_device_attrs[] = {
 	&dev_attr_route4.attr,
 	&dev_attr_route6.attr,
 	&dev_attr_fake_broadcast.attr,
 	&dev_attr_broadcast_mode.attr,
 	&dev_attr_canonical_macaddr.attr,
-	&dev_attr_checksumming.attr,
 	&dev_attr_sniffer.attr,
-	&dev_attr_large_send.attr,
 	NULL,
 };
 
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index a0e05ef6592..8512b5c0ef8 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -1083,7 +1083,7 @@ static void zfcp_fsf_send_els_handler(struct zfcp_fsf_req *req)
 		}
 		break;
 	case FSF_SBAL_MISMATCH:
-		/* should never occure, avoided in zfcp_fsf_send_els */
+		/* should never occur, avoided in zfcp_fsf_send_els */
 		/* fall through */
 	default:
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 8da5ed644c2..98e97d90835 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -391,7 +391,7 @@ int zfcp_qdio_open(struct zfcp_qdio *qdio)
 	if (do_QDIO(cdev, QDIO_FLAG_SYNC_INPUT, 0, 0, QDIO_MAX_BUFFERS_PER_Q))
 		goto failed_qdio;
 
-	/* set index of first avalable SBALS / number of available SBALS */
+	/* set index of first available SBALS / number of available SBALS */
 	qdio->req_q_idx = 0;
 	atomic_set(&qdio->req_q_free, QDIO_MAX_BUFFERS_PER_Q);
 	atomic_set_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &qdio->adapter->status);
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index e8566224fe4..6b4678a7900 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -13,7 +13,7 @@
  * TODO: Erase/program both banks of a 8MB SIMM.
  *
  * It is anticipated that programming an OS Flash will be a routine
- * procedure. In the same time it is exeedingly dangerous because
+ * procedure. In the same time it is exceedingly dangerous because
  * a user can program its OBP flash with OS image and effectively
  * kill the machine.
  *
diff --git a/drivers/sbus/char/max1617.h b/drivers/sbus/char/max1617.h
index 0bb09c286cb..cd30819a0a3 100644
--- a/drivers/sbus/char/max1617.h
+++ b/drivers/sbus/char/max1617.h
@@ -6,7 +6,7 @@
 #define MAX1617_CPU_TEMP	0x01 /* Processor die temp in C	*/
 #define MAX1617_STATUS		0x02 /* Chip status bits	*/
 
-/* Read-only versions of changable registers. */
+/* Read-only versions of changeable registers. */
 #define MAX1617_RD_CFG_BYTE	0x03 /* Config register		*/
 #define MAX1617_RD_CVRATE_BYTE	0x04 /* Temp conversion rate	*/
 #define MAX1617_RD_AMB_HIGHLIM	0x05 /* Ambient high limit	*/
diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h
index 3343824855d..040f7214e5b 100644
--- a/drivers/scsi/3w-9xxx.h
+++ b/drivers/scsi/3w-9xxx.h
@@ -61,7 +61,7 @@ static twa_message_type twa_aen_table[] = {
 	{0x0000, "AEN queue empty"},
 	{0x0001, "Controller reset occurred"},
 	{0x0002, "Degraded unit detected"},
-	{0x0003, "Controller error occured"},
+	{0x0003, "Controller error occurred"},
 	{0x0004, "Background rebuild failed"},
 	{0x0005, "Background rebuild done"},
 	{0x0006, "Incomplete unit detected"},
diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h
index 8b9f9d17e7f..49dcf03c631 100644
--- a/drivers/scsi/3w-xxxx.h
+++ b/drivers/scsi/3w-xxxx.h
@@ -8,7 +8,7 @@
 
    Copyright (C) 1999-2010 3ware Inc.
 
-   Kernel compatiblity By:	Andre Hedrick <andre@suse.com>
+   Kernel compatibility By:	Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000	Andre Hedrick <andre@suse.com>
 
    This program is free software; you can redistribute it and/or modify
diff --git a/drivers/scsi/53c700.scr b/drivers/scsi/53c700.scr
index a064a092c60..ec822e3b7a2 100644
--- a/drivers/scsi/53c700.scr
+++ b/drivers/scsi/53c700.scr
@@ -31,7 +31,7 @@ ABSOLUTE	StatusAddress = 0	; Addr to receive status return
 ABSOLUTE	ReceiveMsgAddress = 0	; Addr to receive msg
 ;
 ; This is the magic component for handling scatter-gather.  Each of the
-; SG components is preceeded by a script fragment which moves the
+; SG components is preceded by a script fragment which moves the
 ; necessary amount of data and jumps to the next SG segment.  The final
 ; SG segment jumps back to .  However, this address is the first SG script
 ; segment.
diff --git a/drivers/scsi/53c700_d.h_shipped b/drivers/scsi/53c700_d.h_shipped
index 0b42a51257f..aa623da333c 100644
--- a/drivers/scsi/53c700_d.h_shipped
+++ b/drivers/scsi/53c700_d.h_shipped
@@ -34,7 +34,7 @@ ABSOLUTE	StatusAddress = 0	; Addr to receive status return
 ABSOLUTE	ReceiveMsgAddress = 0	; Addr to receive msg
 ;
 ; This is the magic component for handling scatter-gather.  Each of the
-; SG components is preceeded by a script fragment which moves the
+; SG components is preceded by a script fragment which moves the
 ; necessary amount of data and jumps to the next SG segment.  The final
 ; SG segment jumps back to .  However, this address is the first SG script
 ; segment.
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index e40cdfb7541..dcd716d6860 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -2509,7 +2509,7 @@ static void FPT_ssel(unsigned long port, unsigned char p_card)
 				WR_HARPOON(port + hp_autostart_3,
 					   (SELECT + SELCHK_STRT));
 
-				/* Setup our STATE so we know what happend when
+				/* Setup our STATE so we know what happened when
 				   the wheels fall off. */
 				currSCCB->Sccb_scsistat = SELECT_ST;
 
@@ -2900,7 +2900,7 @@ static void FPT_SendMsg(unsigned long port, unsigned char message)
  *
  * Function: FPT_sdecm
  *
- * Description: Determine the proper responce to the message from the
+ * Description: Determine the proper response to the message from the
  *              target device.
  *
  *---------------------------------------------------------------------*/
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index e7cd2fcbe03..165e4dd865d 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -1198,12 +1198,12 @@ static irqreturn_t NCR5380_intr(int dummy, void *dev_id)
 				 */
 
 				if ((NCR5380_read(MODE_REG) & MR_DMA) && ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) {
-					int transfered;
+					int transferred;
 
 					if (!hostdata->connected)
 						panic("scsi%d : received end of DMA interrupt with no connected cmd\n", instance->hostno);
 
-					transfered = (hostdata->dmalen - NCR5380_dma_residual(instance));
+					transferred = (hostdata->dmalen - NCR5380_dma_residual(instance));
 					hostdata->connected->SCp.this_residual -= transferred;
 					hostdata->connected->SCp.ptr += transferred;
 					hostdata->dmalen = 0;
@@ -1563,7 +1563,7 @@ failed:
  *      bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes or transfered or exit
+ *      maximum number of bytes, 0 if all bytes or transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
@@ -1800,7 +1800,7 @@ static int do_abort(struct Scsi_Host *host) {
  *      bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes or transfered or exit
+ *      maximum number of bytes, 0 if all bytes or transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 118ce83a737..06199574144 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -747,8 +747,8 @@ char * get_container_type(unsigned tindex)
  * Arguments: [1] pointer to void [1] int
  *
  * Purpose: Sets SCSI inquiry data strings for vendor, product
- * and revision level. Allows strings to be set in platform dependant
- * files instead of in OS dependant driver source.
+ * and revision level. Allows strings to be set in platform dependent
+ * files instead of in OS dependent driver source.
  */
 
 static void setinqstr(struct aac_dev *dev, void *data, int tindex)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 29ab00016b7..ffb587817ef 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1259,7 +1259,7 @@ struct aac_dev
 #define CACHE_UNSTABLE		2
 
 /*
- *	Lets the client know at which level the data was commited on
+ *	Lets the client know at which level the data was committed on
  *	a write request
  */
 
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index dd7ad3ba2da..e7d0d47b918 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -421,7 +421,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 	if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
 		return -EBUSY;
 	/*
-	 *	There are 5 cases with the wait and reponse requested flags.
+	 *	There are 5 cases with the wait and response requested flags.
 	 *	The only invalid cases are if the caller requests to wait and
 	 *	does not request a response and if the caller does not want a
 	 *	response and the Fib is not allocated from pool. If a response
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 081c6de92bc..bfd618a6949 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4544,7 +4544,7 @@ AscMemWordCopyPtrToLram(PortAddr iop_base, ushort s_addr,
  * Copy 4 bytes to LRAM.
  *
  * The source data is assumed to be in little-endian order in memory
- * and is maintained in little-endian order when writen to LRAM.
+ * and is maintained in little-endian order when written to LRAM.
  */
 static void
 AscMemDWordCopyPtrToLram(PortAddr iop_base,
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index d058f1ab82b..1c10b796c1a 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -461,7 +461,7 @@ static int aha1740_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *)
 	/* The Adaptec Spec says the card is so fast that the loops
            will only be executed once in the code below. Even if this
            was true with the fastest processors when the spec was
-           written, it doesn't seem to be true with todays fast
+           written, it doesn't seem to be true with today's fast
            processors. We print a warning if the code is executed more
            often than LOOPCNT_WARN. If this happens, it should be
            investigated. If the count reaches LOOPCNT_MAX, we assume
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 95ee5038518..9b059422aac 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -473,7 +473,7 @@ struct hardware_scb {
  *	o A residual has occurred if SG_FULL_RESID is set in sgptr,
  *	  or residual_sgptr does not have SG_LIST_NULL set.
  *
- *	o We are transfering the last segment if residual_datacnt has
+ *	o We are transferring the last segment if residual_datacnt has
  *	  the SG_LAST_SEG flag set.
  *
  * Host:
@@ -516,7 +516,7 @@ struct hardware_scb {
  */
 
 /*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
  * The aic7xxx chips only support a 24bit length.  We use the top byte of
  * the length to store additional address bits and a flag to indicate
  * that a given segment terminates the transfer.  This gives us an
diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg
index 0666c22ab55..7e12c31ccfd 100644
--- a/drivers/scsi/aic7xxx/aic79xx.reg
+++ b/drivers/scsi/aic7xxx/aic79xx.reg
@@ -305,7 +305,7 @@ register HS_MAILBOX {
 }
 
 /*
- * Sequencer Interupt Status
+ * Sequencer Interrupt Status
  */
 register SEQINTSTAT {
 	address			0x00C
@@ -685,7 +685,7 @@ register DCHRXMSG0 {
 }
 
 /*
- * CMC Recieve Message 0
+ * CMC Receive Message 0
  */
 register CMCRXMSG0 {
 	address			0x090
@@ -696,7 +696,7 @@ register CMCRXMSG0 {
 }
 
 /*
- * Overlay Recieve Message 0
+ * Overlay Receive Message 0
  */
 register OVLYRXMSG0 {
 	address			0x090
@@ -732,7 +732,7 @@ register DCHRXMSG1 {
 }
 
 /*
- * CMC Recieve Message 1
+ * CMC Receive Message 1
  */
 register CMCRXMSG1 {
 	address			0x091
@@ -742,7 +742,7 @@ register CMCRXMSG1 {
 }
 
 /*
- * Overlay Recieve Message 1
+ * Overlay Receive Message 1
  */
 register OVLYRXMSG1 {
 	address			0x091
@@ -777,7 +777,7 @@ register DCHRXMSG2 {
 }
 
 /*
- * CMC Recieve Message 2
+ * CMC Receive Message 2
  */
 register CMCRXMSG2 {
 	address			0x092
@@ -787,7 +787,7 @@ register CMCRXMSG2 {
 }
 
 /*
- * Overlay Recieve Message 2
+ * Overlay Receive Message 2
  */
 register OVLYRXMSG2 {
 	address			0x092
@@ -816,7 +816,7 @@ register DCHRXMSG3 {
 }
 
 /*
- * CMC Recieve Message 3
+ * CMC Receive Message 3
  */
 register CMCRXMSG3 {
 	address			0x093
@@ -826,7 +826,7 @@ register CMCRXMSG3 {
 }
 
 /*
- * Overlay Recieve Message 3
+ * Overlay Receive Message 3
  */
 register OVLYRXMSG3 {
 	address			0x093
@@ -1249,7 +1249,7 @@ register TARGPCISTAT {
 
 /*
  * LQ Packet In
- * The last LQ Packet recieved
+ * The last LQ Packet received
  */
 register LQIN {
 	address			0x020
@@ -2573,7 +2573,7 @@ register IOPDNCTL {
 }
 
 /*
- * Shaddow Host Address.
+ * Shadow Host Address.
  */
 register SHADDR {
 	address			0x060
@@ -3983,7 +3983,7 @@ scratch_ram {
 
 	/*
 	 * The maximum amount of time to wait, when interrupt coalescing
-	 * is enabled, before issueing a CMDCMPLT interrupt for a completed
+	 * is enabled, before issuing a CMDCMPLT interrupt for a completed
 	 * command.
 	 */
 	INT_COALESCING_TIMER {
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index 2fb78e35a9e..3a36d9362a1 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -567,7 +567,7 @@ BEGIN_CRITICAL;
 	shr	SELOID, 4, SCB_SCSIID;
 	/*
 	 * If we want to send a message to the device, ensure
-	 * we are selecting with atn irregardless of our packetized
+	 * we are selecting with atn regardless of our packetized
 	 * agreement.  Since SPI4 only allows target reset or PPR
 	 * messages if this is a packetized connection, the change
 	 * to our negotiation table entry for this selection will
@@ -960,7 +960,7 @@ p_status_okay:
  * This is done to allow the host to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  *
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
@@ -1507,7 +1507,7 @@ service_fifo:
 		 * If the other FIFO needs loading, then it
 		 * must not have claimed the S/G cache yet
 		 * (SG_CACHE_AVAIL would have been cleared in
-		 * the orginal FIFO mode and we test this above).
+		 * the original FIFO mode and we test this above).
 		 * Return to the idle loop so we can process the
 		 * FIFO not currently on the bus first.
 		 */
@@ -1521,7 +1521,7 @@ idle_sgfetch_okay:
 idle_sgfetch_start:
 	/*
 	 * We fetch a "cacheline aligned" and sized amount of data
-	 * so we don't end up referencing a non-existant page.
+	 * so we don't end up referencing a non-existent page.
 	 * Cacheline aligned is in quotes because the kernel will
 	 * set the prefetch amount to a reasonable level if the
 	 * cacheline size is unknown.
@@ -1551,7 +1551,7 @@ idle_sg_avail:
 	test	DFSTATUS, PRELOAD_AVAIL jz return;
 	/*
 	 * On the A, preloading a segment before HDMAENACK
-	 * comes true can clobber the shaddow address of the
+	 * comes true can clobber the shadow address of the
 	 * first segment in the S/G FIFO.  Wait until it is
 	 * safe to proceed.
 	 */
@@ -2004,10 +2004,10 @@ pkt_handle_xfer:
 	 * Defer handling of this NONPACKREQ until we
 	 * can be sure it pertains to this FIFO.  SAVEPTRS
 	 * will not be asserted if the NONPACKREQ is for us,
-	 * so we must simulate it if shaddow is valid.  If
-	 * shaddow is not valid, keep running this FIFO until we
+	 * so we must simulate it if shadow is valid.  If
+	 * shadow is not valid, keep running this FIFO until we
 	 * have satisfied the transfer by loading segments and
-	 * waiting for either shaddow valid or last_seg_done.
+	 * waiting for either shadow valid or last_seg_done.
 	 */
 	test	MDFFSTAT, SHVALID jnz pkt_saveptrs;
 pkt_service_fifo:
@@ -2171,7 +2171,7 @@ pkt_status_check_nonpackreq:
 	/*
 	 * The unexpected nonpkt phase handler assumes that any
 	 * data channel use will have a FIFO reference count.  It
-	 * turns out that the status handler doesn't need a refernce
+	 * turns out that the status handler doesn't need a references
 	 * count since the status received flag, and thus completion
 	 * processing, cannot be set until the handler is finished.
 	 * We increment the count here to make the nonpkt handler
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 3233bf56443..5f8617dd43b 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -562,7 +562,7 @@ ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index)
 }
 #endif
 
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
 /*
  * Return pointers to the transfer negotiation information
  * for the specified our_id/remote_id pair.
@@ -599,7 +599,7 @@ void
 ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
 {
 	/*
-	 * Write low byte first to accomodate registers
+	 * Write low byte first to accommodate registers
 	 * such as PRGMCNT where the order maters.
 	 */
 	ahd_outb(ahd, port, value & 0xFF);
@@ -2067,7 +2067,7 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
 		 * that requires host assistance for completion.
 		 * While handling the message phase(s), we will be
 		 * notified by the sequencer after each byte is
-		 * transfered so we can track bus phase changes.
+		 * transferred so we can track bus phase changes.
 		 *
 		 * If this is the first time we've seen a HOST_MSG_LOOP
 		 * interrupt, initialize the state of the host message
@@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
 		/*
 		 * Although the driver does not care about the
 		 * 'Selection in Progress' status bit, the busy
-		 * LED does.  SELINGO is only cleared by a successfull
+		 * LED does.  SELINGO is only cleared by a successful
 		 * selection, so we must manually clear it to insure
 		 * the LED turns off just incase no future successful
 		 * selections occur (e.g. no devices on the bus).
@@ -3548,7 +3548,7 @@ ahd_clear_critical_section(struct ahd_softc *ahd)
 		ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
   		ahd_outb(ahd, SIMODE1, simode1);
 		/*
-		 * SCSIINT seems to glitch occassionally when
+		 * SCSIINT seems to glitch occasionally when
 		 * the interrupt masks are restored.  Clear SCSIINT
 		 * one more time so that only persistent errors
 		 * are seen as a real interrupt.
@@ -3838,7 +3838,7 @@ ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo,
 
 /*
  * Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity.  This currently
+ * negotiate with at the next convenient opportunity.  This currently
  * means the next time we send the initial identify messages for
  * a new transaction.
  */
@@ -4200,7 +4200,7 @@ ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
 
 	/*
 	 * During packetized transfers, the target will
-	 * give us the oportunity to send command packets
+	 * give us the opportunity to send command packets
 	 * without us asserting attention.
 	 */
 	if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
@@ -5651,7 +5651,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
 
 		/*
 		 * Requeue all tagged commands for this target
-		 * currently in our posession so they can be
+		 * currently in our possession so they can be
 		 * converted to untagged commands.
 		 */
 		ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
@@ -6245,7 +6245,7 @@ ahd_shutdown(void *arg)
 /*
  * Reset the controller and record some information about it
  * that is only available just after a reset.  If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
  * and the caller requests that the chip be fully reinitialized
  * to a runable state.  Chip interrupts are *not* enabled after
  * a reinitialization.  The caller must enable interrupts via
@@ -6495,7 +6495,7 @@ ahd_init_scbdata(struct ahd_softc *ahd)
 	}
 
 	/*
-	 * Note that we were successfull
+	 * Note that we were successful
 	 */
 	return (0); 
 
@@ -7079,7 +7079,7 @@ ahd_init(struct ahd_softc *ahd)
 		return (ENOMEM);
 
 	/*
-	 * Verify that the compiler hasn't over-agressively
+	 * Verify that the compiler hasn't over-aggressively
 	 * padded important structures.
 	 */
 	if (sizeof(struct hardware_scb) != 64)
@@ -10087,7 +10087,7 @@ ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf,
 		return (error);
 
 	/*
-	 * Write the data.  If we don't get throught the loop at
+	 * Write the data.  If we don't get through the loop at
 	 * least once, the arguments were invalid.
 	 */
 	retval = EINVAL;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 25d06662447..7d48700257a 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -1441,7 +1441,7 @@ ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
 		usertags = ahd_linux_user_tagdepth(ahd, devinfo);
 		if (!was_queuing) {
 			/*
-			 * Start out agressively and allow our
+			 * Start out aggressively and allow our
 			 * dynamic queue depth algorithm to take
 			 * care of the rest.
 			 */
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 17444bc18bc..f695774645c 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -440,7 +440,7 @@ struct hardware_scb {
  *	o A residual has occurred if SG_FULL_RESID is set in sgptr,
  *	  or residual_sgptr does not have SG_LIST_NULL set.
  *
- *	o We are transfering the last segment if residual_datacnt has
+ *	o We are transferring the last segment if residual_datacnt has
  *	  the SG_LAST_SEG flag set.
  *
  * Host:
@@ -494,7 +494,7 @@ struct hardware_scb {
  */
 
 /*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
  * The aic7xxx chips only support a 24bit length.  We use the top byte of
  * the length to store additional address bits and a flag to indicate
  * that a given segment terminates the transfer.  This gives us an
diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg
index 9a96e55da39..ba0b411d03e 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.reg
+++ b/drivers/scsi/aic7xxx/aic7xxx.reg
@@ -351,7 +351,7 @@ register SSTAT2 {
 	address			0x00d
 	access_mode RO
 	field	OVERRUN		0x80
-	field	SHVALID		0x40	/* Shaddow Layer non-zero */
+	field	SHVALID		0x40	/* Shadow Layer non-zero */
 	field	EXP_ACTIVE	0x10	/* SCSI Expander Active */
 	field	CRCVALERR	0x08	/* CRC doesn't match (U3 only) */
 	field	CRCENDERR	0x04	/* No terminal CRC packet (U3 only) */
diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq
index 5a4cfc954a9..e60041e8f2d 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx/aic7xxx.seq
@@ -57,10 +57,10 @@ PREFIX = "ahc_"
  * a later time.  This problem cannot be resolved by holding a single entry
  * in scratch ram since a reconnecting target can request sense and this will
  * create yet another SCB waiting for selection.  The solution used here is to 
- * use byte 27 of the SCB as a psuedo-next pointer and to thread a list
+ * use byte 27 of the SCB as a pseudo-next pointer and to thread a list
  * of SCBs that are awaiting selection.  Since 0-0xfe are valid SCB indexes, 
  * SCB_LIST_NULL is 0xff which is out of range.  An entry is also added to
- * this list everytime a request sense occurs or after completing a non-tagged
+ * this list every time a request sense occurs or after completing a non-tagged
  * command for which a second SCB has been queued.  The sequencer will
  * automatically consume the entries.
  */
@@ -752,7 +752,7 @@ idle_loop:
 
 	/*
 	 * We fetch a "cacheline aligned" and sized amount of data
-	 * so we don't end up referencing a non-existant page.
+	 * so we don't end up referencing a non-existent page.
 	 * Cacheline aligned is in quotes because the kernel will
 	 * set the prefetch amount to a reasonable level if the
 	 * cacheline size is unknown.
@@ -1485,7 +1485,7 @@ p_status_okay:
  * This is done to allow the host to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  *
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
@@ -1999,7 +1999,7 @@ if ((ahc->flags & AHC_TARGETROLE) != 0) {
  * from out to in, wait an additional data release delay before continuing.
  */
 change_phase:
-	/* Wait for preceeding I/O session to complete. */
+	/* Wait for preceding I/O session to complete. */
 	test	SCSISIGI, ACKI jnz .;
 
 	/* Change the phase */
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index e021b4812d5..dc28b0a91b2 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -427,7 +427,7 @@ ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index)
 }
 #endif
 
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
 /*
  * Determine whether the sequencer reported a residual
  * for this SCB/transaction.
@@ -1243,7 +1243,7 @@ ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat)
 		 * that requires host assistance for completion.
 		 * While handling the message phase(s), we will be
 		 * notified by the sequencer after each byte is
-		 * transfered so we can track bus phase changes.
+		 * transferred so we can track bus phase changes.
 		 *
 		 * If this is the first time we've seen a HOST_MSG_LOOP
 		 * interrupt, initialize the state of the host message
@@ -1487,7 +1487,7 @@ ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat)
 		       scbptr, ahc_inb(ahc, ARG_1),
 		       ahc->scb_data->hscbs[scbptr].tag);
 		ahc_dump_card_state(ahc);
-		panic("for saftey");
+		panic("for safety");
 		break;
 	}
 	case OUT_OF_RANGE:
@@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
 		/*
 		 * Although the driver does not care about the
 		 * 'Selection in Progress' status bit, the busy
-		 * LED does.  SELINGO is only cleared by a successfull
+		 * LED does.  SELINGO is only cleared by a successful
 		 * selection, so we must manually clear it to insure
 		 * the LED turns off just incase no future successful
 		 * selections occur (e.g. no devices on the bus).
@@ -1943,7 +1943,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
 			if (lastphase != P_BUSFREE) {
 				/*
 				 * Renegotiate with this device at the
-				 * next oportunity just in case this busfree
+				 * next opportunity just in case this busfree
 				 * is due to a negotiation mismatch with the
 				 * device.
 				 */
@@ -2442,7 +2442,7 @@ ahc_validate_width(struct ahc_softc *ahc, struct ahc_initiator_tinfo *tinfo,
 
 /*
  * Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity.  This currently
+ * negotiate with at the next convenient opportunity.  This currently
  * means the next time we send the initial identify messages for
  * a new transaction.
  */
@@ -4131,7 +4131,7 @@ ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
 
 		/*
 		 * Requeue all tagged commands for this target
-		 * currently in our posession so they can be
+		 * currently in our possession so they can be
 		 * converted to untagged commands.
 		 */
 		ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
@@ -4581,7 +4581,7 @@ ahc_shutdown(void *arg)
 /*
  * Reset the controller and record some information about it
  * that is only available just after a reset.  If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
  * and the caller requests that the chip be fully reinitialized
  * to a runable state.  Chip interrupts are *not* enabled after
  * a reinitialization.  The caller must enable interrupts via
@@ -4899,7 +4899,7 @@ ahc_init_scbdata(struct ahc_softc *ahc)
 	ahc->next_queued_scb = ahc_get_scb(ahc);
 
 	/*
-	 * Note that we were successfull
+	 * Note that we were successful
 	 */
 	return (0); 
 
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 4a359bb307c..c6251bb4f43 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -294,7 +294,7 @@ static uint32_t aic7xxx_extended;
  * dubious at best.  To my knowledge, this option has never actually
  * solved a PCI parity problem, but on certain machines with broken PCI
  * chipset configurations where stray PCI transactions with bad parity are
- * the norm rather than the exception, the error messages can be overwelming.
+ * the norm rather than the exception, the error messages can be overwhelming.
  * It's included in the driver for completeness.
  *   0	   = Shut off PCI parity check
  *   non-0 = reverse polarity pci parity checking
@@ -1318,7 +1318,7 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct scsi_device *sdev,
 		usertags = ahc_linux_user_tagdepth(ahc, devinfo);
 		if (!was_queuing) {
 			/*
-			 * Start out agressively and allow our
+			 * Start out aggressively and allow our
 			 * dynamic queue depth algorithm to take
 			 * care of the rest.
 			 */
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 2b11a427236..6917b4f5ac9 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -789,7 +789,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry)
 	ahc->bus_intr = ahc_pci_intr;
 	ahc->bus_chip_init = ahc_pci_chip_init;
 
-	/* Remeber how the card was setup in case there is no SEEPROM */
+	/* Remember how the card was setup in case there is no SEEPROM */
 	if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) {
 		ahc_pause(ahc);
 		if ((ahc->features & AHC_ULTRA2) != 0)
@@ -860,7 +860,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry)
 	}
 
 	/*
-	 * We cannot perform ULTRA speeds without the presense
+	 * We cannot perform ULTRA speeds without the presence
 	 * of the external precision resistor.
 	 */
 	if ((ahc->features & AHC_ULTRA) != 0) {
@@ -969,7 +969,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry)
 }
 
 /*
- * Test for the presense of external sram in an
+ * Test for the presence of external sram in an
  * "unshared" configuration.
  */
 static int
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
index e4064433842..f1586a43790 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
@@ -803,7 +803,7 @@ macro_arglist:
 |	macro_arglist ',' T_ARG
 	{
 		if ($1 == 0) {
-			stop("Comma without preceeding argument in arg list",
+			stop("Comma without preceding argument in arg list",
 			     EX_DATAERR);
 			/* NOTREACHED */
 		}
@@ -1319,8 +1319,8 @@ code:
 ;
 
 	/*
-	 * This grammer differs from the one in the aic7xxx
-	 * reference manual since the grammer listed there is
+	 * This grammar differs from the one in the aic7xxx
+	 * reference manual since the grammar listed there is
 	 * ambiguous and causes a shift/reduce conflict.
 	 * It also seems more logical as the "immediate"
 	 * argument is listed as the second arg like the
@@ -1799,7 +1799,7 @@ format_3_instr(int opcode, symbol_ref_t *src,
 	instr = seq_alloc();
 	f3_instr = &instr->format.format3;
 	if (address->symbol == NULL) {
-		/* 'dot' referrence.  Use the current instruction pointer */
+		/* 'dot' reference.  Use the current instruction pointer */
 		addr = instruction_ptr + address->offset;
 	} else if (address->symbol->type == UNINITIALIZED) {
 		/* forward reference */
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
index ff46aa6801b..708326df076 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
@@ -115,7 +115,7 @@ macro_arglist:
 |	macro_arglist ',' T_ARG
 	{
 		if ($1 == 0) {
-			stop("Comma without preceeding argument in arg list",
+			stop("Comma without preceding argument in arg list",
 			     EX_DATAERR);
 			/* NOTREACHED */
 		}
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index 4ff60a08df0..5b212f0df89 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -905,7 +905,7 @@ struct aic_dev_data {
  * problems with architectures I can't test on (because I don't have one,
  * such as the Alpha based systems) which happen to give faults for
  * non-aligned memory accesses, care was taken to align this structure
- * in a way that gauranteed all accesses larger than 8 bits were aligned
+ * in a way that guaranteed all accesses larger than 8 bits were aligned
  * on the appropriate boundary.  It's also organized to try and be more
  * cache line efficient.  Be careful when changing this lest you might hurt
  * overall performance and bring down the wrath of the masses.
@@ -1180,7 +1180,7 @@ static int aic7xxx_pci_parity = 0;
  * the card's registers in a hex dump format tailored to each model of
  * controller.
  * 
- * NOTE: THE CONTROLLER IS LEFT IN AN UNUSEABLE STATE BY THIS OPTION.
+ * NOTE: THE CONTROLLER IS LEFT IN AN UNUSABLE STATE BY THIS OPTION.
  *       YOU CANNOT BOOT UP WITH THIS OPTION, IT IS FOR DEBUGGING PURPOSES
  *       ONLY
  */
@@ -3467,7 +3467,7 @@ aic7xxx_reset_current_bus(struct aic7xxx_host *p)
   /* Turn off the bus' current operations, after all, we shouldn't have any
    * valid commands left to cause a RSELI and SELO once we've tossed the
    * bus away with this reset, so we might as well shut down the sequencer
-   * until the bus is restarted as oppossed to saving the current settings
+   * until the bus is restarted as opposed to saving the current settings
    * and restoring them (which makes no sense to me). */
 
   /* Turn on the bus reset. */
@@ -4070,7 +4070,7 @@ aic7xxx_handle_seqint(struct aic7xxx_host *p, unsigned char intstat)
             aic_dev->max_q_depth = aic_dev->temp_q_depth = 1;
             /*
              * We set this command up as a bus device reset.  However, we have
-             * to clear the tag type as it's causing us problems.  We shouldnt
+             * to clear the tag type as it's causing us problems.  We shouldn't
              * have to worry about any other commands being active, since if
              * the device is refusing tagged commands, this should be the
              * first tagged command sent to the device, however, we do have
@@ -9748,7 +9748,7 @@ skip_pci_controller:
     }
 
     /*
-     * We are commited now, everything has been checked and this card
+     * We are committed now, everything has been checked and this card
      * has been found, now we just set it up
      */
 
@@ -9906,7 +9906,7 @@ skip_pci_controller:
    *  2: All PCI controllers with BIOS_ENABLED next, according to BIOS
    *     address, going from lowest to highest.
    *  3: Remaining VLB/EISA controllers going in slot order.
-   *  4: Remaining PCI controllers, going in PCI device order (reversable)
+   *  4: Remaining PCI controllers, going in PCI device order (reversible)
    */
 
   {
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index 1565be9ebd4..823ff287322 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -51,7 +51,7 @@
  * use byte 27 of the SCB as a pseudo-next pointer and to thread a list
  * of SCBs that are awaiting selection.  Since 0-0xfe are valid SCB indexes, 
  * SCB_LIST_NULL is 0xff which is out of range.  An entry is also added to
- * this list everytime a request sense occurs or after completing a non-tagged
+ * this list every time a request sense occurs or after completing a non-tagged
  * command for which a second SCB has been queued.  The sequencer will
  * automatically consume the entries.
  */
@@ -696,7 +696,7 @@ p_status:
  * This is done to allow the hsot to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
  * bus device reset).
@@ -716,8 +716,8 @@ p_mesgout_identify:
 	} else {
 		and	SINDEX,0x7,SCB_TCL;	/* lun */
 	}
-	and	A,DISCENB,SCB_CONTROL;	/* mask off disconnect privledge */
-	or	SINDEX,A;		/* or in disconnect privledge */
+	and	A,DISCENB,SCB_CONTROL;	/* mask off disconnect privilege */
+	or	SINDEX,A;		/* or in disconnect privilege */
 	or	SINDEX,MSG_IDENTIFYFLAG;
 p_mesgout_mk_message:
 	test	SCB_CONTROL,MK_MESSAGE  jz p_mesgout_tag;
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index 40273a747d2..dd6cc8008b1 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -2134,7 +2134,7 @@
 * The host accesses this scratch in a different manner from the
 * link sequencer. The sequencer has to use LSEQ registers
 * LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat
-* mapping of the scratch memory is avaliable for software
+* mapping of the scratch memory is available for software
 * convenience and to prevent corruption while the sequencer is
 * running. This memory is mapped onto addresses 800h - 9FFh.
 *
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index da7b9887ec4..f980600f78a 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -75,8 +75,10 @@ MODULE_AUTHOR("Nick Cheng <support@areca.com.tw>");
 MODULE_DESCRIPTION("ARECA (ARC11xx/12xx/16xx/1880) SATA/SAS RAID Host Bus Adapter");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_VERSION(ARCMSR_DRIVER_VERSION);
-static int sleeptime = 10;
-static int retrycount = 12;
+
+#define	ARCMSR_SLEEPTIME	10
+#define	ARCMSR_RETRYCOUNT	12
+
 wait_queue_head_t wait_q;
 static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb,
 					struct scsi_cmnd *cmd);
@@ -171,24 +173,6 @@ static struct pci_driver arcmsr_pci_driver = {
 ****************************************************************************
 ****************************************************************************
 */
-int arcmsr_sleep_for_bus_reset(struct scsi_cmnd *cmd)
-{
-		struct Scsi_Host *shost = NULL;
-		int i, isleep;
-		shost = cmd->device->host;
-		isleep = sleeptime / 10;
-		if (isleep > 0) {
-			for (i = 0; i < isleep; i++) {
-				msleep(10000);
-			}
-		}
-
-		isleep = sleeptime % 10;
-		if (isleep > 0) {
-			msleep(isleep*1000);
-		}
-		return 0;
-}
 
 static void arcmsr_free_hbb_mu(struct AdapterControlBlock *acb)
 {
@@ -323,66 +307,64 @@ static void arcmsr_define_adapter_type(struct AdapterControlBlock *acb)
 
 	default: acb->adapter_type = ACB_ADAPTER_TYPE_A;
 	}
-}	
+}
 
 static uint8_t arcmsr_hba_wait_msgint_ready(struct AdapterControlBlock *acb)
 {
 	struct MessageUnit_A __iomem *reg = acb->pmuA;
-	uint32_t Index;
-	uint8_t Retries = 0x00;
-	do {
-		for (Index = 0; Index < 100; Index++) {
-			if (readl(&reg->outbound_intstatus) &
-					ARCMSR_MU_OUTBOUND_MESSAGE0_INT) {
-				writel(ARCMSR_MU_OUTBOUND_MESSAGE0_INT,
-					&reg->outbound_intstatus);
-				return true;
-			}
-			msleep(10);
-		}/*max 1 seconds*/
+	int i;
+
+	for (i = 0; i < 2000; i++) {
+		if (readl(&reg->outbound_intstatus) &
+				ARCMSR_MU_OUTBOUND_MESSAGE0_INT) {
+			writel(ARCMSR_MU_OUTBOUND_MESSAGE0_INT,
+				&reg->outbound_intstatus);
+			return true;
+		}
+		msleep(10);
+	} /* max 20 seconds */
 
-	} while (Retries++ < 20);/*max 20 sec*/
 	return false;
 }
 
 static uint8_t arcmsr_hbb_wait_msgint_ready(struct AdapterControlBlock *acb)
 {
 	struct MessageUnit_B *reg = acb->pmuB;
-	uint32_t Index;
-	uint8_t Retries = 0x00;
-	do {
-		for (Index = 0; Index < 100; Index++) {
-			if (readl(reg->iop2drv_doorbell)
-				& ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) {
-				writel(ARCMSR_MESSAGE_INT_CLEAR_PATTERN
-					, reg->iop2drv_doorbell);
-				writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell);
-				return true;
-			}
-			msleep(10);
-		}/*max 1 seconds*/
+	int i;
+
+	for (i = 0; i < 2000; i++) {
+		if (readl(reg->iop2drv_doorbell)
+			& ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) {
+			writel(ARCMSR_MESSAGE_INT_CLEAR_PATTERN,
+					reg->iop2drv_doorbell);
+			writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT,
+					reg->drv2iop_doorbell);
+			return true;
+		}
+		msleep(10);
+	} /* max 20 seconds */
 
-	} while (Retries++ < 20);/*max 20 sec*/
 	return false;
 }
 
 static uint8_t arcmsr_hbc_wait_msgint_ready(struct AdapterControlBlock *pACB)
 {
 	struct MessageUnit_C *phbcmu = (struct MessageUnit_C *)pACB->pmuC;
-	unsigned char Retries = 0x00;
-	uint32_t Index;
-	do {
-		for (Index = 0; Index < 100; Index++) {
-			if (readl(&phbcmu->outbound_doorbell) & ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE) {
-				writel(ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE_DOORBELL_CLEAR, &phbcmu->outbound_doorbell_clear);/*clear interrupt*/
-				return true;
-			}
-			/* one us delay	*/
-			msleep(10);
-		} /*max 1 seconds*/
-	} while (Retries++ < 20); /*max 20 sec*/
+	int i;
+
+	for (i = 0; i < 2000; i++) {
+		if (readl(&phbcmu->outbound_doorbell)
+				& ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE) {
+			writel(ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE_DOORBELL_CLEAR,
+				&phbcmu->outbound_doorbell_clear); /*clear interrupt*/
+			return true;
+		}
+		msleep(10);
+	} /* max 20 seconds */
+
 	return false;
 }
+
 static void arcmsr_flush_hba_cache(struct AdapterControlBlock *acb)
 {
 	struct MessageUnit_A __iomem *reg = acb->pmuA;
@@ -459,10 +441,11 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 	struct CommandControlBlock *ccb_tmp;
 	int i = 0, j = 0;
 	dma_addr_t cdb_phyaddr;
-	unsigned long roundup_ccbsize = 0, offset;
+	unsigned long roundup_ccbsize;
 	unsigned long max_xfer_len;
 	unsigned long max_sg_entrys;
 	uint32_t  firm_config_version;
+
 	for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
 		for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++)
 			acb->devstate[i][j] = ARECA_RAID_GONE;
@@ -472,23 +455,20 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 	firm_config_version = acb->firm_cfg_version;
 	if((firm_config_version & 0xFF) >= 3){
 		max_xfer_len = (ARCMSR_CDB_SG_PAGE_LENGTH << ((firm_config_version >> 8) & 0xFF)) * 1024;/* max 4M byte */
-		max_sg_entrys = (max_xfer_len/4096);	
+		max_sg_entrys = (max_xfer_len/4096);
 	}
 	acb->host->max_sectors = max_xfer_len/512;
 	acb->host->sg_tablesize = max_sg_entrys;
 	roundup_ccbsize = roundup(sizeof(struct CommandControlBlock) + (max_sg_entrys - 1) * sizeof(struct SG64ENTRY), 32);
-	acb->uncache_size = roundup_ccbsize * ARCMSR_MAX_FREECCB_NUM + 32;
+	acb->uncache_size = roundup_ccbsize * ARCMSR_MAX_FREECCB_NUM;
 	dma_coherent = dma_alloc_coherent(&pdev->dev, acb->uncache_size, &dma_coherent_handle, GFP_KERNEL);
 	if(!dma_coherent){
-		printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error \n", acb->host->host_no);
+		printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error\n", acb->host->host_no);
 		return -ENOMEM;
 	}
 	acb->dma_coherent = dma_coherent;
 	acb->dma_coherent_handle = dma_coherent_handle;
 	memset(dma_coherent, 0, acb->uncache_size);
-	offset = roundup((unsigned long)dma_coherent, 32) - (unsigned long)dma_coherent;
-	dma_coherent_handle = dma_coherent_handle + offset;
-	dma_coherent = (struct CommandControlBlock *)dma_coherent + offset;
 	ccb_tmp = dma_coherent;
 	acb->vir2phy_offset = (unsigned long)dma_coherent - (unsigned long)dma_coherent_handle;
 	for(i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++){
@@ -2602,12 +2582,8 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
 		if (cdb_phyaddr_hi32 != 0) {
 			struct MessageUnit_C *reg = (struct MessageUnit_C *)acb->pmuC;
 
-			if (cdb_phyaddr_hi32 != 0) {
-				unsigned char Retries = 0x00;
-				do {
-					printk(KERN_NOTICE "arcmsr%d: cdb_phyaddr_hi32=0x%x \n", acb->adapter_index, cdb_phyaddr_hi32);
-				} while (Retries++ < 100);
-			}
+			printk(KERN_NOTICE "arcmsr%d: cdb_phyaddr_hi32=0x%x\n",
+					acb->adapter_index, cdb_phyaddr_hi32);
 			writel(ARCMSR_SIGNATURE_SET_CONFIG, &reg->msgcode_rwbuffer[0]);
 			writel(cdb_phyaddr_hi32, &reg->msgcode_rwbuffer[1]);
 			writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, &reg->inbound_msgaddr0);
@@ -2955,12 +2931,12 @@ static int arcmsr_bus_reset(struct scsi_cmnd *cmd)
 				arcmsr_hardware_reset(acb);
 				acb->acb_flags &= ~ACB_F_IOP_INITED;
 sleep_again:
-				arcmsr_sleep_for_bus_reset(cmd);
+				ssleep(ARCMSR_SLEEPTIME);
 				if ((readl(&reg->outbound_msgaddr1) & ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK) == 0) {
-					printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, retry=%d \n", acb->host->host_no, retry_count);
-					if (retry_count > retrycount) {
+					printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, retry=%d\n", acb->host->host_no, retry_count);
+					if (retry_count > ARCMSR_RETRYCOUNT) {
 						acb->fw_flag = FW_DEADLOCK;
-						printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, RETRY TERMINATED!! \n", acb->host->host_no);
+						printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, RETRY TERMINATED!!\n", acb->host->host_no);
 						return FAILED;
 					}
 					retry_count++;
@@ -3025,12 +3001,12 @@ sleep_again:
 				arcmsr_hardware_reset(acb);
 				acb->acb_flags &= ~ACB_F_IOP_INITED;
 sleep:
-				arcmsr_sleep_for_bus_reset(cmd);
+				ssleep(ARCMSR_SLEEPTIME);
 				if ((readl(&reg->host_diagnostic) & 0x04) != 0) {
-					printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, retry=%d \n", acb->host->host_no, retry_count);
-					if (retry_count > retrycount) {
+					printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, retry=%d\n", acb->host->host_no, retry_count);
+					if (retry_count > ARCMSR_RETRYCOUNT) {
 						acb->fw_flag = FW_DEADLOCK;
-						printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, RETRY TERMINATED!! \n", acb->host->host_no);
+						printk(KERN_ERR "arcmsr%d: waiting for hw bus reset return, RETRY TERMINATED!!\n", acb->host->host_no);
 						return FAILED;
 					}
 					retry_count++;
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index ec166726b31..c454e44cf51 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -100,7 +100,7 @@
  */
 #define TIMEOUT_TIME 10
 /*
- * Define this if you want to have verbose explaination of SCSI
+ * Define this if you want to have verbose explanation of SCSI
  * status/messages.
  */
 #undef CONFIG_ACORNSCSI_CONSTANTS
@@ -1561,7 +1561,7 @@ void acornscsi_message(AS_Host *host)
 	/*
 	 * If we were negociating sync transfer, we don't yet know if
 	 * this REJECT is for the sync transfer or for the tagged queue/wide
-	 * transfer.  Re-initiate sync transfer negociation now, and if
+	 * transfer.  Re-initiate sync transfer negotiation now, and if
 	 * we got a REJECT in response to SDTR, then it'll be set to DONE.
 	 */
 	if (host->device[host->SCpnt->device->id].sync_state == SYNC_SENT_REQUEST)
diff --git a/drivers/scsi/arm/acornscsi.h b/drivers/scsi/arm/acornscsi.h
index 8d2172a0b35..01bc715a3ae 100644
--- a/drivers/scsi/arm/acornscsi.h
+++ b/drivers/scsi/arm/acornscsi.h
@@ -223,8 +223,8 @@ typedef enum {
  * Synchronous transfer state
  */
 typedef enum {					/* Synchronous transfer state		*/
-    SYNC_ASYNCHRONOUS,				/* don't negociate synchronous transfers*/
-    SYNC_NEGOCIATE,				/* start negociation			*/
+    SYNC_ASYNCHRONOUS,				/* don't negotiate synchronous transfers*/
+    SYNC_NEGOCIATE,				/* start negotiation			*/
     SYNC_SENT_REQUEST,				/* sent SDTR message			*/
     SYNC_COMPLETED,				/* received SDTR reply			*/
 } syncxfer_t;
@@ -322,7 +322,7 @@ typedef struct acornscsi_hostdata {
     /* per-device info */
     struct {
 	unsigned char	sync_xfer;		/* synchronous transfer (SBIC value)	*/
-	syncxfer_t	sync_state;		/* sync xfer negociation state		*/
+	syncxfer_t	sync_state;		/* sync xfer negotiation state		*/
 	unsigned char	disconnect_ok:1;	/* device can disconnect		*/
     } device[8];
     unsigned long	busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy	*/
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index 2836fe248df..a750aa72b8e 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -228,7 +228,7 @@ static const char *arxescsi_info(struct Scsi_Host *host)
  * Params  : buffer - a buffer to write information to
  *	     start  - a pointer into this buffer set by this routine to the start
  *		      of the required information.
- *	     offset - offset into information that we have read upto.
+ *	     offset - offset into information that we have read up to.
  *	     length - length of buffer
  *	     host_no - host number to return information for
  *	     inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index c9902b5c1f2..547987b8638 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -344,7 +344,7 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
  * Params   : buffer - a buffer to write information to
  *	      start  - a pointer into this buffer set by this routine to the start
  *		       of the required information.
- *	      offset - offset into information that we have read upto.
+ *	      offset - offset into information that we have read up to.
  *	      length - length of buffer
  *	      host_no - host number to return information for
  *	      inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index d8435132f46..edfd12b48c2 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -429,7 +429,7 @@ eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
  * Params   : buffer - a buffer to write information to
  *	      start  - a pointer into this buffer set by this routine to the start
  *		       of the required information.
- *	      offset - offset into information that we have read upto.
+ *	      offset - offset into information that we have read up to.
  *	      length - length of buffer
  *	      host_no - host number to return information for
  *	      inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 2b2ce21e227..e85c40b6e19 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2119,7 +2119,7 @@ request_sense:
 	 * executed, unless a target connects to us.
 	 */
 	if (info->reqSCpnt)
-		printk(KERN_WARNING "scsi%d.%c: loosing request command\n",
+		printk(KERN_WARNING "scsi%d.%c: losing request command\n",
 			info->host->host_no, '0' + SCpnt->device->id);
 	info->reqSCpnt = SCpnt;
 }
@@ -2294,7 +2294,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
 		 * If we don't have an IRQ, then we must poll the card for
 		 * it's interrupt, and use that to call this driver's
 		 * interrupt routine.  That way, we keep the command
-		 * progressing.  Maybe we can add some inteligence here
+		 * progressing.  Maybe we can add some intelligence here
 		 * and go to sleep if we know that the device is going
 		 * to be some time (eg, disconnected).
 		 */
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index f30f8d659dc..84b7127c012 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -203,11 +203,11 @@ typedef enum {
 } fasdmatype_t;
 
 typedef enum {
-	neg_wait,					/* Negociate with device		*/
-	neg_inprogress,					/* Negociation sent			*/
-	neg_complete,					/* Negociation complete			*/
-	neg_targcomplete,				/* Target completed negociation		*/
-	neg_invalid					/* Negociation not supported		*/
+	neg_wait,					/* Negotiate with device		*/
+	neg_inprogress,					/* Negotiation sent			*/
+	neg_complete,					/* Negotiation complete			*/
+	neg_targcomplete,				/* Target completed negotiation		*/
+	neg_invalid					/* Negotiation not supported		*/
 } neg_t;
 
 #define MAGIC	0x441296bdUL
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index e2297b4c1b9..9274c0677b9 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -232,7 +232,7 @@ powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
  * Params   : buffer  - a buffer to write information to
  *	      start   - a pointer into this buffer set by this routine to the start
  *		        of the required information.
- *	      offset  - offset into information that we have read upto.
+ *	      offset  - offset into information that we have read up to.
  *	      length  - length of buffer
  *	      inout   - 0 for reading, 1 for writing.
  * Returns  : length of data written to buffer.
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 88b2928b4d3..ea439f93ed8 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -464,7 +464,7 @@ static void free_all_tags(void)
  *
  * Parameters: Scsi_Cmnd *cmd
  *    The command to work on. The first scatter buffer's data are
- *    assumed to be already transfered into ptr/this_residual.
+ *    assumed to be already transferred into ptr/this_residual.
  */
 
 static void merge_contiguous_buffers(Scsi_Cmnd *cmd)
@@ -1720,7 +1720,7 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
  *	bytes to transfer, **data - pointer to data pointer.
  *
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes are transfered or exit
+ *	maximum number of bytes, 0 if all bytes are transferred or exit
  *	is in same phase.
  *
  *	Also, *phase, *count, *data are modified in place.
@@ -1911,7 +1911,7 @@ static int do_abort(struct Scsi_Host *host)
  *	bytes to transfer, **data - pointer to data pointer.
  *
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes or transfered or exit
+ *	maximum number of bytes, 0 if all bytes or transferred or exit
  *	is in same phase.
  *
  *	Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 76029d570be..7e6eca4a125 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1228,7 +1228,7 @@ TCM_5:			/* isolation complete..  */
 	printk(" \n%x %x %x %s\n ",assignid_map,mbuf[0],mbuf[1],&mbuf[2]); */
 	i = 15;
 	j = mbuf[0];
-	if ((j & 0x20) != 0) {	/* bit5=1:ID upto 7      */
+	if ((j & 0x20) != 0) {	/* bit5=1:ID up to 7      */
 		i = 7;
 	}
 	if ((j & 0x06) == 0) {	/* IDvalid?             */
diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h
index 1cb8a5e85c7..1d7b976c850 100644
--- a/drivers/scsi/be2iscsi/be.h
+++ b/drivers/scsi/be2iscsi/be.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -8,11 +8,11 @@
  * Public License is included in this distribution in the file called COPYING.
  *
  * Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
  *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
 
 #ifndef BEISCSI_H
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index ad246369d37..b8a82f2c62c 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -8,11 +8,11 @@
  * Public License is included in this distribution in the file called COPYING.
  *
  * Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
  *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
 
 #include "be.h"
@@ -458,6 +458,7 @@ void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
 	req_hdr->opcode = opcode;
 	req_hdr->subsystem = subsystem;
 	req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+	req_hdr->timeout = 120;
 }
 
 static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 5218de4ab35..497eb29e5c9 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -8,11 +8,11 @@
  * Public License is included in this distribution in the file called COPYING.
  *
  * Contact Information:
- * linux-drivers@serverengines.com
+ * linux-drivers@emulex.com
  *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
 
 #ifndef BEISCSI_CMDS_H
@@ -877,7 +877,7 @@ struct be_all_if_id {
 						 */
 #define CXN_KILLED_PDU_SIZE_EXCEEDS_DSL 3	/* Connection got invalidated
 						 * internally
-						 * due to a recieved PDU
+						 * due to a received PDU
 						 * size > DSL
 						 */
 #define CXN_KILLED_BURST_LEN_MISMATCH   4	/* Connection got invalidated
@@ -886,7 +886,7 @@ struct be_all_if_id {
 						 * FBL/MBL.
 						 */
 #define CXN_KILLED_AHS_RCVD		5	/* Connection got invalidated
-						 * internally due to a recieved
+						 * internally due to a received
 						 * PDU Hdr that has
 						 * AHS */
 #define CXN_KILLED_HDR_DIGEST_ERR	6	/* Connection got invalidated
@@ -899,12 +899,12 @@ struct be_all_if_id {
 						 * pdu hdr
 						 */
 #define CXN_KILLED_STALE_ITT_TTT_RCVD	8	/* Connection got invalidated
-						 * internally due to a recieved
+						 * internally due to a received
 						 * ITT/TTT that does not belong
 						 * to this Connection
 						 */
 #define CXN_KILLED_INVALID_ITT_TTT_RCVD 9	/* Connection got invalidated
-						 * internally due to recieved
+						 * internally due to received
 						 * ITT/TTT value > Max
 						 * Supported ITTs/TTTs
 						 */
@@ -936,21 +936,21 @@ struct be_all_if_id {
 						 * index.
 						 */
 #define CXN_KILLED_OVER_RUN_RESIDUAL	16	/* Command got invalidated
-						 * internally due to recived
+						 * internally due to received
 						 * command has residual
 						 * over run bytes.
 						 */
 #define CXN_KILLED_UNDER_RUN_RESIDUAL	17	/* Command got invalidated
-						 * internally due to recived
+						 * internally due to received
 						 * command has residual under
 						 * run bytes.
 						 */
 #define CMD_KILLED_INVALID_STATSN_RCVD	18	/* Command got invalidated
-						 * internally due to a recieved
+						 * internally due to a received
 						 * PDU has an invalid StatusSN
 						 */
 #define CMD_KILLED_INVALID_R2T_RCVD	19	/* Command got invalidated
-						 * internally due to a recieved
+						 * internally due to a received
 						 * an R2T with some invalid
 						 * fields in it
 						 */
@@ -973,7 +973,7 @@ struct be_all_if_id {
 						 */
 #define CMD_CXN_KILLED_INVALID_DATASN_RCVD 24	/* Command got invalidated
 						 * internally due to a
-						 * recieved PDU has an invalid
+						 * received PDU has an invalid
 						 * DataSN
 						 */
 #define CXN_INVALIDATE_NOTIFY		25	/* Connection invalidation
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 868cc559014..3cad1060502 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
  * as published by the Free Software Foundation.  The full GNU General
  * Public License is included in this distribution in the file called COPYING.
  *
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
  *
  * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * linux-drivers@emulex.com
  *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
 
 #include <scsi/libiscsi.h>
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
index 9c532797c29..ff60b7fd92d 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.h
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
  * as published by the Free Software Foundation.  The full GNU General
  * Public License is included in this distribution in the file called COPYING.
  *
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
  *
  * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * linux-drivers@emulex.com
  *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
 
 #ifndef _BE_ISCSI_
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 24e20ba9633..cea9b275965 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -7,16 +7,16 @@
  * as published by the Free Software Foundation.  The full GNU General
  * Public License is included in this distribution in the file called COPYING.
  *
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
  *
  * Contact Information:
- * linux-drivers@serverengines.com
- *
- *  ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * linux-drivers@emulex.com
  *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
+
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -420,7 +420,8 @@ static int beiscsi_setup_boot_info(struct beiscsi_hba *phba)
 	return 0;
 
 free_kset:
-	iscsi_boot_destroy_kset(phba->boot_kset);
+	if (phba->boot_kset)
+		iscsi_boot_destroy_kset(phba->boot_kset);
 	return -ENOMEM;
 }
 
@@ -3464,23 +3465,23 @@ static void hwi_enable_intr(struct beiscsi_hba *phba)
 	addr = (u8 __iomem *) ((u8 __iomem *) ctrl->pcicfg +
 			PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
 	reg = ioread32(addr);
-	SE_DEBUG(DBG_LVL_8, "reg =x%08x\n", reg);
 
 	enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
 	if (!enabled) {
 		reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
 		SE_DEBUG(DBG_LVL_8, "reg =x%08x addr=%p\n", reg, addr);
 		iowrite32(reg, addr);
-		if (!phba->msix_enabled) {
-			eq = &phwi_context->be_eq[0].q;
+	}
+
+	if (!phba->msix_enabled) {
+		eq = &phwi_context->be_eq[0].q;
+		SE_DEBUG(DBG_LVL_8, "eq->id=%d\n", eq->id);
+		hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
+	} else {
+		for (i = 0; i <= phba->num_cpus; i++) {
+			eq = &phwi_context->be_eq[i].q;
 			SE_DEBUG(DBG_LVL_8, "eq->id=%d\n", eq->id);
 			hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
-		} else {
-			for (i = 0; i <= phba->num_cpus; i++) {
-				eq = &phwi_context->be_eq[i].q;
-				SE_DEBUG(DBG_LVL_8, "eq->id=%d\n", eq->id);
-				hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
-			}
 		}
 	}
 }
@@ -4019,12 +4020,17 @@ static int beiscsi_mtask(struct iscsi_task *task)
 		hwi_write_buffer(pwrb, task);
 		break;
 	case ISCSI_OP_NOOP_OUT:
-		AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
-			      INI_RD_CMD);
-		if (task->hdr->ttt == ISCSI_RESERVED_TAG)
+		if (task->hdr->ttt != ISCSI_RESERVED_TAG) {
+			AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+				      TGT_DM_CMD);
+			AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt,
+				      pwrb, 0);
 			AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
-		else
+		} else {
+			AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+				      INI_RD_CMD);
 			AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 1);
+		}
 		hwi_write_buffer(pwrb, task);
 		break;
 	case ISCSI_OP_TEXT:
@@ -4144,10 +4150,11 @@ static void beiscsi_remove(struct pci_dev *pcidev)
 			    phba->ctrl.mbox_mem_alloced.size,
 			    phba->ctrl.mbox_mem_alloced.va,
 			    phba->ctrl.mbox_mem_alloced.dma);
+	if (phba->boot_kset)
+		iscsi_boot_destroy_kset(phba->boot_kset);
 	iscsi_host_remove(phba->shost);
 	pci_dev_put(phba->pcidev);
 	iscsi_host_free(phba->shost);
-	iscsi_boot_destroy_kset(phba->boot_kset);
 }
 
 static void beiscsi_msix_enable(struct beiscsi_hba *phba)
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 90eb74f6bca..081c171a1ed 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
  * as published by the Free Software Foundation.  The full GNU General
  * Public License is included in this distribution in the file called COPYING.
  *
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
  *
  * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * linux-drivers@emulex.com
  *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
 
 #ifndef _BEISCSI_MAIN_
@@ -35,7 +34,7 @@
 
 #include "be.h"
 #define DRV_NAME		"be2iscsi"
-#define BUILD_STR		"2.0.549.0"
+#define BUILD_STR		"2.103.298.0"
 #define BE_NAME			"ServerEngines BladeEngine2" \
 				"Linux iSCSI Driver version" BUILD_STR
 #define DRV_DESC		BE_NAME " " "Driver"
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 877324fc594..44762cfa3e1 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
  * as published by the Free Software Foundation.  The full GNU General
  * Public License is included in this distribution in the file called COPYING.
  *
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
  *
  * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * linux-drivers@emulex.com
  *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
 
 #include "be_mgmt.h"
@@ -203,8 +202,8 @@ int mgmt_epfw_cleanup(struct beiscsi_hba *phba, unsigned short chute)
 			   OPCODE_COMMON_ISCSI_CLEANUP, sizeof(*req));
 
 	req->chute = chute;
-	req->hdr_ring_id = 0;
-	req->data_ring_id = 0;
+	req->hdr_ring_id = cpu_to_le16(HWI_GET_DEF_HDRQ_ID(phba));
+	req->data_ring_id = cpu_to_le16(HWI_GET_DEF_BUFQ_ID(phba));
 
 	status =  be_mcc_notify_wait(phba);
 	if (status)
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
index b9acedf7865..08428824ace 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.h
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -1,5 +1,5 @@
 /**
- * Copyright (C) 2005 - 2010 ServerEngines
+ * Copyright (C) 2005 - 2011 Emulex
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
@@ -7,15 +7,14 @@
  * as published by the Free Software Foundation.  The full GNU General
  * Public License is included in this distribution in the file called COPYING.
  *
- * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com)
  *
  * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
+ * linux-drivers@emulex.com
  *
+ * Emulex
+ * 3333 Susan Street
+ * Costa Mesa, CA 92626
  */
 
 #ifndef _BEISCSI_MGMT_
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 1cd5c8b0618..91838c51fb7 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -355,7 +355,7 @@ bfa_msix_lpu_err(struct bfa_s *bfa, int vec)
 			/*
 			 * ERR_PSS bit needs to be cleared as well in case
 			 * interrups are shared so driver's interrupt handler is
-			 * still called eventhough it is already masked out.
+			 * still called even though it is already masked out.
 			 */
 			curr_value = readl(
 					bfa->ioc.ioc_regs.pss_err_status_reg);
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index 648c8417672..207f598877c 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -145,7 +145,7 @@ struct bfa_fw_io_stats_s {
 	u32	ioh_data_oor_event;	/*  Data out of range */
 	u32	ioh_ro_ooo_event;	/*  Relative offset out of range */
 	u32	ioh_cpu_owned_event;	/*  IOH hit -iost owned by f/w */
-	u32	ioh_unexp_frame_event;	/*  unexpected frame recieved
+	u32	ioh_unexp_frame_event;	/*  unexpected frame received
 						 *   count */
 	u32	ioh_err_int;		/*  IOH error int during data-phase
 						 *   for scsi write
@@ -566,8 +566,8 @@ struct bfa_itnim_iostats_s {
 	u32	input_reqs;		/*  Data in-bound requests	*/
 	u32	output_reqs;		/*  Data out-bound requests	*/
 	u32	io_comps;		/*  Total IO Completions	*/
-	u32	wr_throughput;		/*  Write data transfered in bytes */
-	u32	rd_throughput;		/*  Read data transfered in bytes  */
+	u32	wr_throughput;		/*  Write data transferred in bytes */
+	u32	rd_throughput;		/*  Read data transferred in bytes  */
 
 	u32	iocomp_ok;		/*  Slowpath IO completions	*/
 	u32	iocomp_underrun;	/*  IO underrun		*/
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index 8e764fae8dc..bf0067e0fd0 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -315,7 +315,7 @@ struct fc_plogi_csp_s {
 			query_dbc:1,
 			hg_supp:1;
 #endif
-	__be16		rxsz;		/* recieve data_field size */
+	__be16		rxsz;		/* receive data_field size */
 	__be16		conseq;
 	__be16		ro_bitmap;
 	__be32		e_d_tov;
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index f674f931862..9b43ca4b677 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -1033,7 +1033,7 @@ bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric,
 
 
 /*
- * Lookup for a vport withing a fabric given its pwwn
+ * Lookup for a vport within a fabric given its pwwn
  */
 struct bfa_fcs_vport_s *
 bfa_fcs_fabric_vport_lookup(struct bfa_fcs_fabric_s *fabric, wwn_t pwwn)
diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h
index 0fd63168573..61cdce4bd91 100644
--- a/drivers/scsi/bfa/bfa_fcs.h
+++ b/drivers/scsi/bfa/bfa_fcs.h
@@ -705,7 +705,7 @@ enum rport_event {
 	RPSM_EVENT_ADDRESS_CHANGE = 15, /*  Rport's PID has changed     */
 	RPSM_EVENT_ADDRESS_DISC = 16,   /*  Need to Discover rport's PID */
 	RPSM_EVENT_PRLO_RCVD   = 17,    /*  PRLO from remote device     */
-	RPSM_EVENT_PLOGI_RETRY = 18,    /*  Retry PLOGI continously */
+	RPSM_EVENT_PLOGI_RETRY = 18,    /*  Retry PLOGI continuously */
 };
 
 /*
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 43fa986bb58..1d6be8c1447 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -1149,7 +1149,7 @@ bfa_fcs_lport_fdmi_sm_offline(struct bfa_fcs_lport_fdmi_s *fdmi,
 		} else {
 			/*
 			 * For a base port, we should first register the HBA
-			 * atribute. The HBA attribute also contains the base
+			 * attribute. The HBA attribute also contains the base
 			 *  port registration.
 			 */
 			bfa_sm_set_state(fdmi,
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index 1d34921f88b..16d9a5f61c1 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -1035,7 +1035,7 @@ bfa_fcxp_free(struct bfa_fcxp_s *fcxp)
  * @param[in]	rport	BFA rport pointer. Could be left NULL for WKA rports
  * @param[in]	vf_id	virtual Fabric ID
  * @param[in]	lp_tag	lport tag
- * @param[in]	cts	use Continous sequence
+ * @param[in]	cts	use Continuous sequence
  * @param[in]	cos	fc Class of Service
  * @param[in]	reqlen	request length, does not include FCHS length
  * @param[in]	fchs	fc Header Pointer. The header content will be copied
@@ -5022,7 +5022,7 @@ bfa_uf_start(struct bfa_s *bfa)
 }
 
 /*
- * Register handler for all unsolicted recieve frames.
+ * Register handler for all unsolicted receive frames.
  *
  * @param[in]	bfa		BFA instance
  * @param[in]	ufrecv	receive handler function
diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h
index 331ad992a58..5902a45c080 100644
--- a/drivers/scsi/bfa/bfa_svc.h
+++ b/drivers/scsi/bfa/bfa_svc.h
@@ -127,7 +127,7 @@ struct bfa_fcxp_req_info_s {
 					 * rport nexus is established
 					 */
 	struct fchs_s	fchs;	/*  request FC header structure */
-	u8		cts;	/*  continous sequence */
+	u8		cts;	/*  continuous sequence */
 	u8		class;	/*  FC class for the request/response */
 	u16	max_frmsz;	/*  max send frame size */
 	u16	vf_id;	/*  vsan tag if applicable */
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 44524cf55d3..59b5e9b61d7 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -57,9 +57,19 @@ int		pcie_max_read_reqsz;
 int		bfa_debugfs_enable = 1;
 int		msix_disable_cb = 0, msix_disable_ct = 0;
 
+/* Firmware releated */
 u32	bfi_image_ct_fc_size, bfi_image_ct_cna_size, bfi_image_cb_fc_size;
 u32     *bfi_image_ct_fc, *bfi_image_ct_cna, *bfi_image_cb_fc;
 
+#define BFAD_FW_FILE_CT_FC      "ctfw_fc.bin"
+#define BFAD_FW_FILE_CT_CNA     "ctfw_cna.bin"
+#define BFAD_FW_FILE_CB_FC      "cbfw_fc.bin"
+
+static u32 *bfad_load_fwimg(struct pci_dev *pdev);
+static void bfad_free_fwimg(void);
+static void bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
+		u32 *bfi_image_size, char *fw_name);
+
 static const char *msix_name_ct[] = {
 	"cpe0", "cpe1", "cpe2", "cpe3",
 	"rme0", "rme1", "rme2", "rme3",
@@ -222,6 +232,9 @@ bfad_sm_created(struct bfad_s *bfad, enum bfad_sm_event event)
 		if ((bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
 			bfa_sm_send_event(bfad, BFAD_E_INIT_SUCCESS);
 		} else {
+			printk(KERN_WARNING
+				"bfa %s: bfa init failed\n",
+				bfad->pci_name);
 			bfad->bfad_flags |= BFAD_HAL_INIT_FAIL;
 			bfa_sm_send_event(bfad, BFAD_E_INIT_FAILED);
 		}
@@ -991,10 +1004,6 @@ bfad_cfg_pport(struct bfad_s *bfad, enum bfa_lport_role role)
 		bfad->pport.roles |= BFA_LPORT_ROLE_FCP_IM;
 	}
 
-	/* Setup the debugfs node for this scsi_host */
-	if (bfa_debugfs_enable)
-		bfad_debugfs_init(&bfad->pport);
-
 	bfad->bfad_flags |= BFAD_CFG_PPORT_DONE;
 
 out:
@@ -1004,10 +1013,6 @@ out:
 void
 bfad_uncfg_pport(struct bfad_s *bfad)
 {
-	/* Remove the debugfs node for this scsi_host */
-	kfree(bfad->regdata);
-	bfad_debugfs_exit(&bfad->pport);
-
 	if ((supported_fc4s & BFA_LPORT_ROLE_FCP_IM) &&
 	    (bfad->pport.roles & BFA_LPORT_ROLE_FCP_IM)) {
 		bfad_im_scsi_host_free(bfad, bfad->pport.im_port);
@@ -1278,7 +1283,7 @@ bfad_setup_intr(struct bfad_s *bfad)
 			 * interrupts into one vector, so even if we
 			 * can try to request less vectors, we don't
 			 * know how to associate interrupt events to
-			 *  vectors. Linux doesn't dupicate vectors
+			 *  vectors. Linux doesn't duplicate vectors
 			 * in the MSIX table for this case.
 			 */
 
@@ -1389,6 +1394,10 @@ bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
 	bfad->pport.bfad = bfad;
 	INIT_LIST_HEAD(&bfad->pbc_vport_list);
 
+	/* Setup the debugfs node for this bfad */
+	if (bfa_debugfs_enable)
+		bfad_debugfs_init(&bfad->pport);
+
 	retval = bfad_drv_init(bfad);
 	if (retval != BFA_STATUS_OK)
 		goto out_drv_init_failure;
@@ -1404,6 +1413,9 @@ out_bfad_sm_failure:
 	bfa_detach(&bfad->bfa);
 	bfad_hal_mem_release(bfad);
 out_drv_init_failure:
+	/* Remove the debugfs node for this bfad */
+	kfree(bfad->regdata);
+	bfad_debugfs_exit(&bfad->pport);
 	mutex_lock(&bfad_mutex);
 	bfad_inst--;
 	list_del(&bfad->list_entry);
@@ -1445,6 +1457,10 @@ bfad_pci_remove(struct pci_dev *pdev)
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 	bfad_hal_mem_release(bfad);
 
+	/* Remove the debugfs node for this bfad */
+	kfree(bfad->regdata);
+	bfad_debugfs_exit(&bfad->pport);
+
 	/* Cleaning the BFAD instance */
 	mutex_lock(&bfad_mutex);
 	bfad_inst--;
@@ -1550,7 +1566,7 @@ bfad_exit(void)
 }
 
 /* Firmware handling */
-u32 *
+static void
 bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
 		u32 *bfi_image_size, char *fw_name)
 {
@@ -1558,27 +1574,25 @@ bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
 
 	if (request_firmware(&fw, fw_name, &pdev->dev)) {
 		printk(KERN_ALERT "Can't locate firmware %s\n", fw_name);
-		goto error;
+		*bfi_image = NULL;
+		goto out;
 	}
 
 	*bfi_image = vmalloc(fw->size);
 	if (NULL == *bfi_image) {
 		printk(KERN_ALERT "Fail to allocate buffer for fw image "
 			"size=%x!\n", (u32) fw->size);
-		goto error;
+		goto out;
 	}
 
 	memcpy(*bfi_image, fw->data, fw->size);
 	*bfi_image_size = fw->size/sizeof(u32);
-
-	return *bfi_image;
-
-error:
-	return NULL;
+out:
+	release_firmware(fw);
 }
 
-u32 *
-bfad_get_firmware_buf(struct pci_dev *pdev)
+static u32 *
+bfad_load_fwimg(struct pci_dev *pdev)
 {
 	if (pdev->device == BFA_PCI_DEVICE_ID_CT_FC) {
 		if (bfi_image_ct_fc_size == 0)
@@ -1598,6 +1612,17 @@ bfad_get_firmware_buf(struct pci_dev *pdev)
 	}
 }
 
+static void
+bfad_free_fwimg(void)
+{
+	if (bfi_image_ct_fc_size && bfi_image_ct_fc)
+		vfree(bfi_image_ct_fc);
+	if (bfi_image_ct_cna_size && bfi_image_ct_cna)
+		vfree(bfi_image_ct_cna);
+	if (bfi_image_cb_fc_size && bfi_image_cb_fc)
+		vfree(bfi_image_cb_fc);
+}
+
 module_init(bfad_init);
 module_exit(bfad_exit);
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c
index c66e32eced7..48be0c54f2d 100644
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -28,10 +28,10 @@
  * mount -t debugfs none /sys/kernel/debug
  *
  * BFA Hierarchy:
- *	- bfa/host#
- * where the host number corresponds to the one under /sys/class/scsi_host/host#
+ *	- bfa/pci_dev:<pci_name>
+ * where the pci_name corresponds to the one under /sys/bus/pci/drivers/bfa
  *
- * Debugging service available per host:
+ * Debugging service available per pci_dev:
  * fwtrc:  To collect current firmware trace.
  * drvtrc: To collect current driver trace
  * fwsave: To collect last saved fw trace as a result of firmware crash.
@@ -489,11 +489,9 @@ static atomic_t bfa_debugfs_port_count;
 inline void
 bfad_debugfs_init(struct bfad_port_s *port)
 {
-	struct bfad_im_port_s *im_port = port->im_port;
-	struct bfad_s *bfad = im_port->bfad;
-	struct Scsi_Host *shost = im_port->shost;
+	struct bfad_s *bfad = port->bfad;
 	const struct bfad_debugfs_entry *file;
-	char name[16];
+	char name[64];
 	int i;
 
 	if (!bfa_debugfs_enable)
@@ -510,17 +508,15 @@ bfad_debugfs_init(struct bfad_port_s *port)
 		}
 	}
 
-	/*
-	 * Setup the host# directory for the port,
-	 * corresponds to the scsi_host num of this port.
-	 */
-	snprintf(name, sizeof(name), "host%d", shost->host_no);
+	/* Setup the pci_dev debugfs directory for the port */
+	snprintf(name, sizeof(name), "pci_dev:%s", bfad->pci_name);
 	if (!port->port_debugfs_root) {
 		port->port_debugfs_root =
 			debugfs_create_dir(name, bfa_debugfs_root);
 		if (!port->port_debugfs_root) {
 			printk(KERN_WARNING
-				"BFA host root dir creation failed\n");
+				"bfa %s: debugfs root creation failed\n",
+				bfad->pci_name);
 			goto err;
 		}
 
@@ -536,8 +532,8 @@ bfad_debugfs_init(struct bfad_port_s *port)
 							file->fops);
 			if (!bfad->bfad_dentry_files[i]) {
 				printk(KERN_WARNING
-					"BFA host%d: create %s entry failed\n",
-					shost->host_no, file->name);
+					"bfa %s: debugfs %s creation failed\n",
+					bfad->pci_name, file->name);
 				goto err;
 			}
 		}
@@ -550,8 +546,7 @@ err:
 inline void
 bfad_debugfs_exit(struct bfad_port_s *port)
 {
-	struct bfad_im_port_s *im_port = port->im_port;
-	struct bfad_s *bfad = im_port->bfad;
+	struct bfad_s *bfad = port->bfad;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(bfad_debugfs_files); i++) {
@@ -562,9 +557,7 @@ bfad_debugfs_exit(struct bfad_port_s *port)
 	}
 
 	/*
-	 * Remove the host# directory for the port,
-	 * corresponds to the scsi_host num of this port.
-	*/
+	 * Remove the pci_dev debugfs directory for the port */
 	if (port->port_debugfs_root) {
 		debugfs_remove(port->port_debugfs_root);
 		port->port_debugfs_root = NULL;
diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h
index bfee63b16fa..c296c896851 100644
--- a/drivers/scsi/bfa/bfad_im.h
+++ b/drivers/scsi/bfa/bfad_im.h
@@ -141,29 +141,4 @@ extern struct device_attribute *bfad_im_vport_attrs[];
 
 irqreturn_t bfad_intx(int irq, void *dev_id);
 
-/* Firmware releated */
-#define BFAD_FW_FILE_CT_FC      "ctfw_fc.bin"
-#define BFAD_FW_FILE_CT_CNA     "ctfw_cna.bin"
-#define BFAD_FW_FILE_CB_FC      "cbfw_fc.bin"
-
-u32 *bfad_get_firmware_buf(struct pci_dev *pdev);
-u32 *bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
-		u32 *bfi_image_size, char *fw_name);
-
-static inline u32 *
-bfad_load_fwimg(struct pci_dev *pdev)
-{
-	return bfad_get_firmware_buf(pdev);
-}
-
-static inline void
-bfad_free_fwimg(void)
-{
-	if (bfi_image_ct_fc_size && bfi_image_ct_fc)
-		vfree(bfi_image_ct_fc);
-	if (bfi_image_ct_cna_size && bfi_image_ct_cna)
-		vfree(bfi_image_ct_cna);
-	if (bfi_image_cb_fc_size && bfi_image_cb_fc)
-		vfree(bfi_image_cb_fc);
-}
 #endif
diff --git a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
index 69d031d9846..97a61b4d81b 100644
--- a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
+++ b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
@@ -898,7 +898,7 @@ struct fcoe_confqe {
 
 
 /*
- * FCoE conection data base
+ * FCoE connection data base
  */
 struct fcoe_conn_db {
 #if defined(__BIG_ENDIAN)
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index b6d350ac428..0a404bfb44f 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -130,7 +130,7 @@
 #define BNX2FC_TM_TIMEOUT		60	/* secs */
 #define BNX2FC_IO_TIMEOUT		20000UL	/* msecs */
 
-#define BNX2FC_WAIT_CNT			120
+#define BNX2FC_WAIT_CNT			1200
 #define BNX2FC_FW_TIMEOUT		(3 * HZ)
 #define PORT_MAX			2
 
diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c
index 7a11a255157..52c358427ce 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_els.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_els.c
@@ -397,7 +397,7 @@ void bnx2fc_process_els_compl(struct bnx2fc_cmd *els_req,
 			     &els_req->req_flags)) {
 		BNX2FC_ELS_DBG("Timer context finished processing this "
 			   "els - 0x%x\n", els_req->xid);
-		/* This IO doesnt receive cleanup completion */
+		/* This IO doesn't receive cleanup completion */
 		kref_put(&els_req->refcount, bnx2fc_cmd_release);
 		return;
 	}
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index e2e647509a7..ab255fbc7f3 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -664,7 +664,7 @@ static void bnx2fc_link_speed_update(struct fc_lport *lport)
 	struct fcoe_port *port = lport_priv(lport);
 	struct bnx2fc_hba *hba = port->priv;
 	struct net_device *netdev = hba->netdev;
-	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+	struct ethtool_cmd ecmd;
 
 	if (!dev_ethtool_get_settings(netdev, &ecmd)) {
 		lport->link_supported_speeds &=
@@ -675,12 +675,15 @@ static void bnx2fc_link_speed_update(struct fc_lport *lport)
 		if (ecmd.supported & SUPPORTED_10000baseT_Full)
 			lport->link_supported_speeds |= FC_PORTSPEED_10GBIT;
 
-		if (ecmd.speed == SPEED_1000)
+		switch (ethtool_cmd_speed(&ecmd)) {
+		case SPEED_1000:
 			lport->link_speed = FC_PORTSPEED_1GBIT;
-		if (ecmd.speed == SPEED_10000)
+			break;
+		case SPEED_10000:
 			lport->link_speed = FC_PORTSPEED_10GBIT;
+			break;
+		}
 	}
-	return;
 }
 static int bnx2fc_link_ok(struct fc_lport *lport)
 {
@@ -1130,7 +1133,7 @@ static void bnx2fc_interface_release(struct kref *kref)
 	struct net_device *phys_dev;
 
 	hba = container_of(kref, struct bnx2fc_hba, kref);
-	BNX2FC_HBA_DBG(hba->ctlr.lp, "Interface is being released\n");
+	BNX2FC_MISC_DBG("Interface is being released\n");
 
 	netdev = hba->netdev;
 	phys_dev = hba->phys_dev;
@@ -1254,20 +1257,17 @@ setup_err:
 static struct fc_lport *bnx2fc_if_create(struct bnx2fc_hba *hba,
 				  struct device *parent, int npiv)
 {
-	struct fc_lport		*lport = NULL;
+	struct fc_lport		*lport, *n_port;
 	struct fcoe_port	*port;
 	struct Scsi_Host	*shost;
 	struct fc_vport		*vport = dev_to_vport(parent);
 	int			rc = 0;
 
 	/* Allocate Scsi_Host structure */
-	if (!npiv) {
-		lport = libfc_host_alloc(&bnx2fc_shost_template,
-					  sizeof(struct fcoe_port));
-	} else {
-		lport = libfc_vport_create(vport,
-					   sizeof(struct fcoe_port));
-	}
+	if (!npiv)
+		lport = libfc_host_alloc(&bnx2fc_shost_template, sizeof(*port));
+	else
+		lport = libfc_vport_create(vport, sizeof(*port));
 
 	if (!lport) {
 		printk(KERN_ERR PFX "could not allocate scsi host structure\n");
@@ -1285,7 +1285,6 @@ static struct fc_lport *bnx2fc_if_create(struct bnx2fc_hba *hba,
 		goto lp_config_err;
 
 	if (npiv) {
-		vport = dev_to_vport(parent);
 		printk(KERN_ERR PFX "Setting vport names, 0x%llX 0x%llX\n",
 			vport->node_name, vport->port_name);
 		fc_set_wwnn(lport, vport->node_name);
@@ -1314,12 +1313,17 @@ static struct fc_lport *bnx2fc_if_create(struct bnx2fc_hba *hba,
 	fc_host_port_type(lport->host) = FC_PORTTYPE_UNKNOWN;
 
 	/* Allocate exchange manager */
-	if (!npiv) {
+	if (!npiv)
 		rc = bnx2fc_em_config(lport);
-		if (rc) {
-			printk(KERN_ERR PFX "Error on bnx2fc_em_config\n");
-			goto shost_err;
-		}
+	else {
+		shost = vport_to_shost(vport);
+		n_port = shost_priv(shost);
+		rc = fc_exch_mgr_list_clone(n_port, lport);
+	}
+
+	if (rc) {
+		printk(KERN_ERR PFX "Error on bnx2fc_em_config\n");
+		goto shost_err;
 	}
 
 	bnx2fc_interface_get(hba);
@@ -1352,8 +1356,6 @@ static void bnx2fc_if_destroy(struct fc_lport *lport)
 	/* Free existing transmit skbs */
 	fcoe_clean_pending_queue(lport);
 
-	bnx2fc_interface_put(hba);
-
 	/* Free queued packets for the receive thread */
 	bnx2fc_clean_rx_queue(lport);
 
@@ -1372,6 +1374,8 @@ static void bnx2fc_if_destroy(struct fc_lport *lport)
 
 	/* Release Scsi_Host */
 	scsi_host_put(lport->host);
+
+	bnx2fc_interface_put(hba);
 }
 
 /**
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 1b680e288c5..f756d5f85c7 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -522,6 +522,7 @@ void bnx2fc_process_l2_frame_compl(struct bnx2fc_rport *tgt,
 	fp = fc_frame_alloc(lport, payload_len);
 	if (!fp) {
 		printk(KERN_ERR PFX "fc_frame_alloc failure\n");
+		kfree(unsol_els);
 		return;
 	}
 
@@ -547,6 +548,7 @@ void bnx2fc_process_l2_frame_compl(struct bnx2fc_rport *tgt,
 				 */
 				printk(KERN_ERR PFX "dropping ELS 0x%x\n", op);
 				kfree_skb(skb);
+				kfree(unsol_els);
 				return;
 			}
 		}
@@ -563,6 +565,7 @@ void bnx2fc_process_l2_frame_compl(struct bnx2fc_rport *tgt,
 	} else {
 		BNX2FC_HBA_DBG(lport, "fh_r_ctl = 0x%x\n", fh->fh_r_ctl);
 		kfree_skb(skb);
+		kfree(unsol_els);
 	}
 }
 
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index d3fc302c241..b5b5c346d77 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1273,7 +1273,7 @@ static void bnx2fc_lun_reset_cmpl(struct bnx2fc_cmd *io_req)
 						 bnx2fc_cmd_release);
 							/* timer hold */
 				rc = bnx2fc_initiate_abts(cmd);
-				/* abts shouldnt fail in this context */
+				/* abts shouldn't fail in this context */
 				WARN_ON(rc != SUCCESS);
 			} else
 				printk(KERN_ERR PFX "lun_rst: abts already in"
@@ -1308,7 +1308,7 @@ static void bnx2fc_tgt_reset_cmpl(struct bnx2fc_cmd *io_req)
 				kref_put(&io_req->refcount,
 					 bnx2fc_cmd_release); /* timer hold */
 			rc = bnx2fc_initiate_abts(cmd);
-			/* abts shouldnt fail in this context */
+			/* abts shouldn't fail in this context */
 			WARN_ON(rc != SUCCESS);
 
 		} else
@@ -1663,6 +1663,12 @@ int bnx2fc_queuecommand(struct Scsi_Host *host,
 	tgt = (struct bnx2fc_rport *)&rp[1];
 
 	if (!test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags)) {
+		if (test_bit(BNX2FC_FLAG_UPLD_REQ_COMPL, &tgt->flags))  {
+			sc_cmd->result = DID_NO_CONNECT << 16;
+			sc_cmd->scsi_done(sc_cmd);
+			return 0;
+
+		}
 		/*
 		 * Session is not offloaded yet. Let SCSI-ml retry
 		 * the command.
diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
index 7cc05e4e82d..a2e3830bd26 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
@@ -395,7 +395,7 @@ void bnx2fc_rport_event_handler(struct fc_lport *lport,
 		rp = rport->dd_data;
 		if (rport->port_id == FC_FID_DIR_SERV) {
 			/*
-			 * bnx2fc_rport structure doesnt exist for
+			 * bnx2fc_rport structure doesn't exist for
 			 * directory server.
 			 * We should not come here, as lport will
 			 * take care of fabric login
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 1da34c019b8..f0b89513fae 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -173,7 +173,7 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
 
 /**
  * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
- * @conn:		iscsi connection on which RQ event occured
+ * @conn:		iscsi connection on which RQ event occurred
  * @ptr:		driver buffer to which RQ buffer contents is to
  *			be copied
  * @len:		length of valid data inside RQ buf
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index d0c82340f0e..60d2ef29164 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -772,6 +772,7 @@ static const struct error_info additional[] =
 	{0x3802, "Esn - power management class event"},
 	{0x3804, "Esn - media class event"},
 	{0x3806, "Esn - device busy class event"},
+	{0x3807, "Thin Provisioning soft threshold reached"},
 
 	{0x3900, "Saving parameters not supported"},
 
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index de764ea7419..a2a9c7c6c64 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -450,12 +450,13 @@ static struct cxgbi_sock *cxgbi_sock_create(struct cxgbi_device *cdev)
 	return csk;
 }
 
-static struct rtable *find_route_ipv4(__be32 saddr, __be32 daddr,
+static struct rtable *find_route_ipv4(struct flowi4 *fl4,
+				      __be32 saddr, __be32 daddr,
 				      __be16 sport, __be16 dport, u8 tos)
 {
 	struct rtable *rt;
 
-	rt = ip_route_output_ports(&init_net, NULL, daddr, saddr,
+	rt = ip_route_output_ports(&init_net, fl4, NULL, daddr, saddr,
 				   dport, sport, IPPROTO_TCP, tos, 0);
 	if (IS_ERR(rt))
 		return NULL;
@@ -470,6 +471,7 @@ static struct cxgbi_sock *cxgbi_check_route(struct sockaddr *dst_addr)
 	struct net_device *ndev;
 	struct cxgbi_device *cdev;
 	struct rtable *rt = NULL;
+	struct flowi4 fl4;
 	struct cxgbi_sock *csk = NULL;
 	unsigned int mtu = 0;
 	int port = 0xFFFF;
@@ -482,7 +484,7 @@ static struct cxgbi_sock *cxgbi_check_route(struct sockaddr *dst_addr)
 		goto err_out;
 	}
 
-	rt = find_route_ipv4(0, daddr->sin_addr.s_addr, 0, daddr->sin_port, 0);
+	rt = find_route_ipv4(&fl4, 0, daddr->sin_addr.s_addr, 0, daddr->sin_port, 0);
 	if (!rt) {
 		pr_info("no route to ipv4 0x%x, port %u.\n",
 			daddr->sin_addr.s_addr, daddr->sin_port);
@@ -531,7 +533,7 @@ static struct cxgbi_sock *cxgbi_check_route(struct sockaddr *dst_addr)
 	csk->daddr.sin_addr.s_addr = daddr->sin_addr.s_addr;
 	csk->daddr.sin_port = daddr->sin_port;
 	csk->daddr.sin_family = daddr->sin_family;
-	csk->saddr.sin_addr.s_addr = rt->rt_src;
+	csk->saddr.sin_addr.s_addr = fl4.saddr;
 
 	return csk;
 
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index 0a20fd5f710..9267844519c 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -262,9 +262,9 @@ struct cxgbi_skb_tx_cb {
 enum cxgbi_skcb_flags {
 	SKCBF_TX_NEED_HDR,	/* packet needs a header */
 	SKCBF_RX_COALESCED,	/* received whole pdu */
-	SKCBF_RX_HDR,		/* recieved pdu header */
-	SKCBF_RX_DATA,		/* recieved pdu payload */
-	SKCBF_RX_STATUS,	/* recieved ddp status */
+	SKCBF_RX_HDR,		/* received pdu header */
+	SKCBF_RX_DATA,		/* received pdu payload */
+	SKCBF_RX_STATUS,	/* received ddp status */
 	SKCBF_RX_DATA_DDPD,	/* pdu payload ddp'd */
 	SKCBF_RX_HCRC_ERR,	/* header digest error */
 	SKCBF_RX_DCRC_ERR,	/* data digest error */
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index b0f8523e665..f5b718d3c31 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -235,7 +235,7 @@ struct ScsiReqBlk {
 
 	u8 sg_count;			/* No of HW sg entries for this request */
 	u8 sg_index;			/* Index of HW sg entry for this request */
-	size_t total_xfer_length;	/* Total number of bytes remaining to be transfered */
+	size_t total_xfer_length;	/* Total number of bytes remaining to be transferred */
 	size_t request_length;		/* Total number of bytes in this request */
 	/*
 	 * The sense buffer handling function, request_sense, uses
@@ -778,8 +778,8 @@ static void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
 static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
 		struct ScsiReqBlk *srb)
 {
-	dprintkdbg(DBG_0, "srb_waiting_insert: (pid#%li) <%02i-%i> srb=%p\n",
-		srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+	dprintkdbg(DBG_0, "srb_waiting_insert: (0x%p) <%02i-%i> srb=%p\n",
+		srb->cmd, dcb->target_id, dcb->target_lun, srb);
 	list_add(&srb->list, &dcb->srb_waiting_list);
 }
 
@@ -787,16 +787,16 @@ static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
 static void srb_waiting_append(struct DeviceCtlBlk *dcb,
 		struct ScsiReqBlk *srb)
 {
-	dprintkdbg(DBG_0, "srb_waiting_append: (pid#%li) <%02i-%i> srb=%p\n",
-		 srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+	dprintkdbg(DBG_0, "srb_waiting_append: (0x%p) <%02i-%i> srb=%p\n",
+		 srb->cmd, dcb->target_id, dcb->target_lun, srb);
 	list_add_tail(&srb->list, &dcb->srb_waiting_list);
 }
 
 
 static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
 {
-	dprintkdbg(DBG_0, "srb_going_append: (pid#%li) <%02i-%i> srb=%p\n",
-		srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+	dprintkdbg(DBG_0, "srb_going_append: (0x%p) <%02i-%i> srb=%p\n",
+		srb->cmd, dcb->target_id, dcb->target_lun, srb);
 	list_add_tail(&srb->list, &dcb->srb_going_list);
 }
 
@@ -805,8 +805,8 @@ static void srb_going_remove(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
 {
 	struct ScsiReqBlk *i;
 	struct ScsiReqBlk *tmp;
-	dprintkdbg(DBG_0, "srb_going_remove: (pid#%li) <%02i-%i> srb=%p\n",
-		srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+	dprintkdbg(DBG_0, "srb_going_remove: (0x%p) <%02i-%i> srb=%p\n",
+		srb->cmd, dcb->target_id, dcb->target_lun, srb);
 
 	list_for_each_entry_safe(i, tmp, &dcb->srb_going_list, list)
 		if (i == srb) {
@@ -821,8 +821,8 @@ static void srb_waiting_remove(struct DeviceCtlBlk *dcb,
 {
 	struct ScsiReqBlk *i;
 	struct ScsiReqBlk *tmp;
-	dprintkdbg(DBG_0, "srb_waiting_remove: (pid#%li) <%02i-%i> srb=%p\n",
-		srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+	dprintkdbg(DBG_0, "srb_waiting_remove: (0x%p) <%02i-%i> srb=%p\n",
+		srb->cmd, dcb->target_id, dcb->target_lun, srb);
 
 	list_for_each_entry_safe(i, tmp, &dcb->srb_waiting_list, list)
 		if (i == srb) {
@@ -836,8 +836,8 @@ static void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
 		struct ScsiReqBlk *srb)
 {
 	dprintkdbg(DBG_0,
-		"srb_going_to_waiting_move: (pid#%li) <%02i-%i> srb=%p\n",
-		srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+		"srb_going_to_waiting_move: (0x%p) <%02i-%i> srb=%p\n",
+		srb->cmd, dcb->target_id, dcb->target_lun, srb);
 	list_move(&srb->list, &dcb->srb_waiting_list);
 }
 
@@ -846,8 +846,8 @@ static void srb_waiting_to_going_move(struct DeviceCtlBlk *dcb,
 		struct ScsiReqBlk *srb)
 {
 	dprintkdbg(DBG_0,
-		"srb_waiting_to_going_move: (pid#%li) <%02i-%i> srb=%p\n",
-		srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+		"srb_waiting_to_going_move: (0x%p) <%02i-%i> srb=%p\n",
+		srb->cmd, dcb->target_id, dcb->target_lun, srb);
 	list_move(&srb->list, &dcb->srb_going_list);
 }
 
@@ -982,8 +982,8 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
 {
 	int nseg;
 	enum dma_data_direction dir = cmd->sc_data_direction;
-	dprintkdbg(DBG_0, "build_srb: (pid#%li) <%02i-%i>\n",
-		cmd->serial_number, dcb->target_id, dcb->target_lun);
+	dprintkdbg(DBG_0, "build_srb: (0x%p) <%02i-%i>\n",
+		cmd, dcb->target_id, dcb->target_lun);
 
 	srb->dcb = dcb;
 	srb->cmd = cmd;
@@ -1086,8 +1086,8 @@ static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct s
 	struct ScsiReqBlk *srb;
 	struct AdapterCtlBlk *acb =
 	    (struct AdapterCtlBlk *)cmd->device->host->hostdata;
-	dprintkdbg(DBG_0, "queue_command: (pid#%li) <%02i-%i> cmnd=0x%02x\n",
-		cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+	dprintkdbg(DBG_0, "queue_command: (0x%p) <%02i-%i> cmnd=0x%02x\n",
+		cmd, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 
 	/* Assume BAD_TARGET; will be cleared later */
 	cmd->result = DID_BAD_TARGET << 16;
@@ -1140,7 +1140,7 @@ static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct s
 		/* process immediately */
 		send_srb(acb, srb);
 	}
-	dprintkdbg(DBG_1, "queue_command: (pid#%li) done\n", cmd->serial_number);
+	dprintkdbg(DBG_1, "queue_command: (0x%p) done\n", cmd);
 	return 0;
 
 complete:
@@ -1203,9 +1203,9 @@ static void dump_register_info(struct AdapterCtlBlk *acb,
 			dprintkl(KERN_INFO, "dump: srb=%p cmd=%p OOOPS!\n",
 				srb, srb->cmd);
 		else
-			dprintkl(KERN_INFO, "dump: srb=%p cmd=%p (pid#%li) "
+			dprintkl(KERN_INFO, "dump: srb=%p cmd=%p "
 				 "cmnd=0x%02x <%02i-%i>\n",
-				srb, srb->cmd, srb->cmd->serial_number,
+				srb, srb->cmd,
 				srb->cmd->cmnd[0], srb->cmd->device->id,
 			       	srb->cmd->device->lun);
 		printk("  sglist=%p cnt=%i idx=%i len=%zu\n",
@@ -1301,8 +1301,8 @@ static int __dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
 	struct AdapterCtlBlk *acb =
 		(struct AdapterCtlBlk *)cmd->device->host->hostdata;
 	dprintkl(KERN_INFO,
-		"eh_bus_reset: (pid#%li) target=<%02i-%i> cmd=%p\n",
-		cmd->serial_number, cmd->device->id, cmd->device->lun, cmd);
+		"eh_bus_reset: (0%p) target=<%02i-%i> cmd=%p\n",
+		cmd, cmd->device->id, cmd->device->lun, cmd);
 
 	if (timer_pending(&acb->waiting_timer))
 		del_timer(&acb->waiting_timer);
@@ -1368,8 +1368,8 @@ static int dc395x_eh_abort(struct scsi_cmnd *cmd)
 	    (struct AdapterCtlBlk *)cmd->device->host->hostdata;
 	struct DeviceCtlBlk *dcb;
 	struct ScsiReqBlk *srb;
-	dprintkl(KERN_INFO, "eh_abort: (pid#%li) target=<%02i-%i> cmd=%p\n",
-		cmd->serial_number, cmd->device->id, cmd->device->lun, cmd);
+	dprintkl(KERN_INFO, "eh_abort: (0x%p) target=<%02i-%i> cmd=%p\n",
+		cmd, cmd->device->id, cmd->device->lun, cmd);
 
 	dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
 	if (!dcb) {
@@ -1495,8 +1495,8 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
 	u16 s_stat2, return_code;
 	u8 s_stat, scsicommand, i, identify_message;
 	u8 *ptr;
-	dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> srb=%p\n",
-		srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+	dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> srb=%p\n",
+		dcb->target_id, dcb->target_lun, srb);
 
 	srb->tag_number = TAG_NONE;	/* acb->tag_max_num: had error read in eeprom */
 
@@ -1505,8 +1505,8 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
 	s_stat2 = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
 #if 1
 	if (s_stat & 0x20 /* s_stat2 & 0x02000 */ ) {
-		dprintkdbg(DBG_KG, "start_scsi: (pid#%li) BUSY %02x %04x\n",
-			srb->cmd->serial_number, s_stat, s_stat2);
+		dprintkdbg(DBG_KG, "start_scsi: (0x%p) BUSY %02x %04x\n",
+			s_stat, s_stat2);
 		/*
 		 * Try anyway?
 		 *
@@ -1522,16 +1522,15 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
 	}
 #endif
 	if (acb->active_dcb) {
-		dprintkl(KERN_DEBUG, "start_scsi: (pid#%li) Attempt to start a"
-			"command while another command (pid#%li) is active.",
-			srb->cmd->serial_number,
+		dprintkl(KERN_DEBUG, "start_scsi: (0x%p) Attempt to start a"
+			"command while another command (0x%p) is active.",
+			srb->cmd,
 			acb->active_dcb->active_srb ?
-			    acb->active_dcb->active_srb->cmd->serial_number : 0);
+			    acb->active_dcb->active_srb->cmd : 0);
 		return 1;
 	}
 	if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
-		dprintkdbg(DBG_KG, "start_scsi: (pid#%li) Failed (busy)\n",
-			srb->cmd->serial_number);
+		dprintkdbg(DBG_KG, "start_scsi: (0x%p) Failed (busy)\n", srb->cmd);
 		return 1;
 	}
 	/* Allow starting of SCSI commands half a second before we allow the mid-level
@@ -1603,9 +1602,9 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
 			tag_number++;
 		}
 		if (tag_number >= dcb->max_command) {
-			dprintkl(KERN_WARNING, "start_scsi: (pid#%li) "
+			dprintkl(KERN_WARNING, "start_scsi: (0x%p) "
 				"Out of tags target=<%02i-%i>)\n",
-				srb->cmd->serial_number, srb->cmd->device->id,
+				srb->cmd, srb->cmd->device->id,
 				srb->cmd->device->lun);
 			srb->state = SRB_READY;
 			DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
@@ -1623,8 +1622,8 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
 #endif
 /*polling:*/
 	/* Send CDB ..command block ......... */
-	dprintkdbg(DBG_KG, "start_scsi: (pid#%li) <%02i-%i> cmnd=0x%02x tag=%i\n",
-		srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun,
+	dprintkdbg(DBG_KG, "start_scsi: (0x%p) <%02i-%i> cmnd=0x%02x tag=%i\n",
+		srb->cmd, srb->cmd->device->id, srb->cmd->device->lun,
 		srb->cmd->cmnd[0], srb->tag_number);
 	if (srb->flag & AUTO_REQSENSE) {
 		DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
@@ -1647,8 +1646,8 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
 		 * we caught an interrupt (must be reset or reselection ... )
 		 * : Let's process it first!
 		 */
-		dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> Failed - busy\n",
-			srb->cmd->serial_number, dcb->target_id, dcb->target_lun);
+		dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> Failed - busy\n",
+			srb->cmd, dcb->target_id, dcb->target_lun);
 		srb->state = SRB_READY;
 		free_tag(dcb, srb);
 		srb->msg_count = 0;
@@ -1774,7 +1773,7 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
 		dc395x_statev(acb, srb, &scsi_status);
 
 		/* 
-		 * if there were any exception occured scsi_status
+		 * if there were any exception occurred scsi_status
 		 * will be modify to bus free phase new scsi_status
 		 * transfer out from ... previous dc395x_statev
 		 */
@@ -1843,7 +1842,7 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id)
 static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		u16 *pscsi_status)
 {
-	dprintkdbg(DBG_0, "msgout_phase0: (pid#%li)\n", srb->cmd->serial_number);
+	dprintkdbg(DBG_0, "msgout_phase0: (0x%p)\n", srb->cmd);
 	if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
 		*pscsi_status = PH_BUS_FREE;	/*.. initial phase */
 
@@ -1857,18 +1856,18 @@ static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 {
 	u16 i;
 	u8 *ptr;
-	dprintkdbg(DBG_0, "msgout_phase1: (pid#%li)\n", srb->cmd->serial_number);
+	dprintkdbg(DBG_0, "msgout_phase1: (0x%p)\n", srb->cmd);
 
 	clear_fifo(acb, "msgout_phase1");
 	if (!(srb->state & SRB_MSGOUT)) {
 		srb->state |= SRB_MSGOUT;
 		dprintkl(KERN_DEBUG,
-			"msgout_phase1: (pid#%li) Phase unexpected\n",
-			srb->cmd->serial_number);	/* So what ? */
+			"msgout_phase1: (0x%p) Phase unexpected\n",
+			srb->cmd);	/* So what ? */
 	}
 	if (!srb->msg_count) {
-		dprintkdbg(DBG_0, "msgout_phase1: (pid#%li) NOP msg\n",
-			srb->cmd->serial_number);
+		dprintkdbg(DBG_0, "msgout_phase1: (0x%p) NOP msg\n",
+			srb->cmd);
 		DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_NOP);
 		DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);	/* it's important for atn stop */
 		DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
@@ -1888,7 +1887,7 @@ static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		u16 *pscsi_status)
 {
-	dprintkdbg(DBG_0, "command_phase0: (pid#%li)\n", srb->cmd->serial_number);
+	dprintkdbg(DBG_0, "command_phase0: (0x%p)\n", srb->cmd);
 	DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
 }
 
@@ -1899,7 +1898,7 @@ static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 	struct DeviceCtlBlk *dcb;
 	u8 *ptr;
 	u16 i;
-	dprintkdbg(DBG_0, "command_phase1: (pid#%li)\n", srb->cmd->serial_number);
+	dprintkdbg(DBG_0, "command_phase1: (0x%p)\n", srb->cmd);
 
 	clear_fifo(acb, "command_phase1");
 	DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
@@ -1954,11 +1953,11 @@ static void sg_verify_length(struct ScsiReqBlk *srb)
 static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 {
 	u8 idx;
-	u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
+	u32 xferred = srb->total_xfer_length - left; /* bytes transferred */
 	struct SGentry *psge = srb->segment_x + srb->sg_index;
 
 	dprintkdbg(DBG_0,
-		"sg_update_list: Transfered %i of %i bytes, %i remain\n",
+		"sg_update_list: Transferred %i of %i bytes, %i remain\n",
 		xferred, srb->total_xfer_length, left);
 	if (xferred == 0) {
 		/* nothing to update since we did not transfer any data */
@@ -1990,7 +1989,7 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 
 
 /*
- * We have transfered a single byte (PIO mode?) and need to update
+ * We have transferred a single byte (PIO mode?) and need to update
  * the count of bytes remaining (total_xfer_length) and update the sg
  * entry to either point to next byte in the current sg entry, or of
  * already at the end to point to the start of the next sg entry
@@ -2029,7 +2028,7 @@ static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
 
 
 /*
- * Those no of bytes will be transfered w/ PIO through the SCSI FIFO
+ * Those no of bytes will be transferred w/ PIO through the SCSI FIFO
  * Seems to be needed for unknown reasons; could be a hardware bug :-(
  */
 #define DC395x_LASTPIO 4
@@ -2041,8 +2040,8 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 	struct DeviceCtlBlk *dcb = srb->dcb;
 	u16 scsi_status = *pscsi_status;
 	u32 d_left_counter = 0;
-	dprintkdbg(DBG_0, "data_out_phase0: (pid#%li) <%02i-%i>\n",
-		srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+	dprintkdbg(DBG_0, "data_out_phase0: (0x%p) <%02i-%i>\n",
+		srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
 
 	/*
 	 * KG: We need to drain the buffers before we draw any conclusions!
@@ -2171,8 +2170,8 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		u16 *pscsi_status)
 {
-	dprintkdbg(DBG_0, "data_out_phase1: (pid#%li) <%02i-%i>\n",
-		srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+	dprintkdbg(DBG_0, "data_out_phase1: (0x%p) <%02i-%i>\n",
+		srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
 	clear_fifo(acb, "data_out_phase1");
 	/* do prepare before transfer when data out phase */
 	data_io_transfer(acb, srb, XFERDATAOUT);
@@ -2183,8 +2182,8 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 {
 	u16 scsi_status = *pscsi_status;
 
-	dprintkdbg(DBG_0, "data_in_phase0: (pid#%li) <%02i-%i>\n",
-		srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+	dprintkdbg(DBG_0, "data_in_phase0: (0x%p) <%02i-%i>\n",
+		srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
 
 	/*
 	 * KG: DataIn is much more tricky than DataOut. When the device is finished
@@ -2204,8 +2203,8 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		unsigned int sc, fc;
 
 		if (scsi_status & PARITYERROR) {
-			dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) "
-				"Parity Error\n", srb->cmd->serial_number);
+			dprintkl(KERN_INFO, "data_in_phase0: (0x%p) "
+				"Parity Error\n", srb->cmd);
 			srb->status |= PARITY_ERROR;
 		}
 		/*
@@ -2256,7 +2255,7 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 			DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
 			srb->total_xfer_length, d_left_counter);
 #if DC395x_LASTPIO
-		/* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */
+		/* KG: Less than or equal to 4 bytes can not be transferred via DMA, it seems. */
 		if (d_left_counter
 		    && srb->total_xfer_length <= DC395x_LASTPIO) {
 			size_t left_io = srb->total_xfer_length;
@@ -2394,8 +2393,8 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		u16 *pscsi_status)
 {
-	dprintkdbg(DBG_0, "data_in_phase1: (pid#%li) <%02i-%i>\n",
-		srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+	dprintkdbg(DBG_0, "data_in_phase1: (0x%p) <%02i-%i>\n",
+		srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
 	data_io_transfer(acb, srb, XFERDATAIN);
 }
 
@@ -2406,8 +2405,8 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
 	struct DeviceCtlBlk *dcb = srb->dcb;
 	u8 bval;
 	dprintkdbg(DBG_0,
-		"data_io_transfer: (pid#%li) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
-		srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun,
+		"data_io_transfer: (0x%p) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
+		srb->cmd, srb->cmd->device->id, srb->cmd->device->lun,
 		((io_dir & DMACMD_DIR) ? 'r' : 'w'),
 		srb->total_xfer_length, srb->sg_index, srb->sg_count);
 	if (srb == acb->tmp_srb)
@@ -2579,8 +2578,8 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
 static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		u16 *pscsi_status)
 {
-	dprintkdbg(DBG_0, "status_phase0: (pid#%li) <%02i-%i>\n",
-		srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+	dprintkdbg(DBG_0, "status_phase0: (0x%p) <%02i-%i>\n",
+		srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
 	srb->target_status = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
 	srb->end_message = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);	/* get message */
 	srb->state = SRB_COMPLETED;
@@ -2593,8 +2592,8 @@ static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		u16 *pscsi_status)
 {
-	dprintkdbg(DBG_0, "status_phase1: (pid#%li) <%02i-%i>\n",
-		srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+	dprintkdbg(DBG_0, "status_phase1: (0x%p) <%02i-%i>\n",
+		srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
 	srb->state = SRB_STATUS;
 	DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);	/* it's important for atn stop */
 	DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
@@ -2635,8 +2634,8 @@ static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
 {
 	struct ScsiReqBlk *srb = NULL;
 	struct ScsiReqBlk *i;
-	dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) tag=%i srb=%p\n",
-		   srb->cmd->serial_number, tag, srb);
+	dprintkdbg(DBG_0, "msgin_qtag: (0x%p) tag=%i srb=%p\n",
+		   srb->cmd, tag, srb);
 
 	if (!(dcb->tag_mask & (1 << tag)))
 		dprintkl(KERN_DEBUG,
@@ -2654,8 +2653,8 @@ static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
 	if (!srb)
 		goto mingx0;
 
-	dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) <%02i-%i>\n",
-		srb->cmd->serial_number, srb->dcb->target_id, srb->dcb->target_lun);
+	dprintkdbg(DBG_0, "msgin_qtag: (0x%p) <%02i-%i>\n",
+		srb->cmd, srb->dcb->target_id, srb->dcb->target_lun);
 	if (dcb->flag & ABORT_DEV_) {
 		/*srb->state = SRB_ABORT_SENT; */
 		enable_msgout_abort(acb, srb);
@@ -2865,7 +2864,7 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		u16 *pscsi_status)
 {
 	struct DeviceCtlBlk *dcb = acb->active_dcb;
-	dprintkdbg(DBG_0, "msgin_phase0: (pid#%li)\n", srb->cmd->serial_number);
+	dprintkdbg(DBG_0, "msgin_phase0: (0x%p)\n", srb->cmd);
 
 	srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
 	if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
@@ -2931,9 +2930,9 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 			 * SAVE POINTER may be ignored as we have the struct
 			 * ScsiReqBlk* associated with the scsi command.
 			 */
-			dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
+			dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
 				"SAVE POINTER rem=%i Ignore\n",
-				srb->cmd->serial_number, srb->total_xfer_length);
+				srb->cmd, srb->total_xfer_length);
 			break;
 
 		case RESTORE_POINTERS:
@@ -2941,9 +2940,9 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 			break;
 
 		case ABORT:
-			dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
+			dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
 				"<%02i-%i> ABORT msg\n",
-				srb->cmd->serial_number, dcb->target_id,
+				srb->cmd, dcb->target_id,
 				dcb->target_lun);
 			dcb->flag |= ABORT_DEV_;
 			enable_msgout_abort(acb, srb);
@@ -2975,7 +2974,7 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 		u16 *pscsi_status)
 {
-	dprintkdbg(DBG_0, "msgin_phase1: (pid#%li)\n", srb->cmd->serial_number);
+	dprintkdbg(DBG_0, "msgin_phase1: (0x%p)\n", srb->cmd);
 	clear_fifo(acb, "msgin_phase1");
 	DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
 	if (!(srb->state & SRB_MSGIN)) {
@@ -3041,7 +3040,7 @@ static void disconnect(struct AdapterCtlBlk *acb)
 	}
 	srb = dcb->active_srb;
 	acb->active_dcb = NULL;
-	dprintkdbg(DBG_0, "disconnect: (pid#%li)\n", srb->cmd->serial_number);
+	dprintkdbg(DBG_0, "disconnect: (0x%p)\n", srb->cmd);
 
 	srb->scsi_phase = PH_BUS_FREE;	/* initial phase */
 	clear_fifo(acb, "disconnect");
@@ -3071,14 +3070,14 @@ static void disconnect(struct AdapterCtlBlk *acb)
 			    && srb->state != SRB_MSGOUT) {
 				srb->state = SRB_READY;
 				dprintkl(KERN_DEBUG,
-					"disconnect: (pid#%li) Unexpected\n",
-					srb->cmd->serial_number);
+					"disconnect: (0x%p) Unexpected\n",
+					srb->cmd);
 				srb->target_status = SCSI_STAT_SEL_TIMEOUT;
 				goto disc1;
 			} else {
 				/* Normal selection timeout */
-				dprintkdbg(DBG_KG, "disconnect: (pid#%li) "
-					"<%02i-%i> SelTO\n", srb->cmd->serial_number,
+				dprintkdbg(DBG_KG, "disconnect: (0x%p) "
+					"<%02i-%i> SelTO\n", srb->cmd,
 					dcb->target_id, dcb->target_lun);
 				if (srb->retry_count++ > DC395x_MAX_RETRIES
 				    || acb->scan_devices) {
@@ -3089,8 +3088,8 @@ static void disconnect(struct AdapterCtlBlk *acb)
 				free_tag(dcb, srb);
 				srb_going_to_waiting_move(dcb, srb);
 				dprintkdbg(DBG_KG,
-					"disconnect: (pid#%li) Retry\n",
-					srb->cmd->serial_number);
+					"disconnect: (0x%p) Retry\n",
+					srb->cmd);
 				waiting_set_timer(acb, HZ / 20);
 			}
 		} else if (srb->state & SRB_DISCONNECT) {
@@ -3142,9 +3141,9 @@ static void reselect(struct AdapterCtlBlk *acb)
 		}
 		/* Why the if ? */
 		if (!acb->scan_devices) {
-			dprintkdbg(DBG_KG, "reselect: (pid#%li) <%02i-%i> "
+			dprintkdbg(DBG_KG, "reselect: (0x%p) <%02i-%i> "
 				"Arb lost but Resel win rsel=%i stat=0x%04x\n",
-				srb->cmd->serial_number, dcb->target_id,
+				srb->cmd, dcb->target_id,
 				dcb->target_lun, rsel_tar_lun_id,
 				DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
 			arblostflag = 1;
@@ -3318,7 +3317,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 	enum dma_data_direction dir = cmd->sc_data_direction;
 	int ckc_only = 1;
 
-	dprintkdbg(DBG_1, "srb_done: (pid#%li) <%02i-%i>\n", srb->cmd->serial_number,
+	dprintkdbg(DBG_1, "srb_done: (0x%p) <%02i-%i>\n", srb->cmd,
 		srb->cmd->device->id, srb->cmd->device->lun);
 	dprintkdbg(DBG_SG, "srb_done: srb=%p sg=%i(%i/%i) buf=%p\n",
 		   srb, scsi_sg_count(cmd), srb->sg_index, srb->sg_count,
@@ -3497,9 +3496,9 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 	cmd->SCp.buffers_residual = 0;
 	if (debug_enabled(DBG_KG)) {
 		if (srb->total_xfer_length)
-			dprintkdbg(DBG_KG, "srb_done: (pid#%li) <%02i-%i> "
+			dprintkdbg(DBG_KG, "srb_done: (0x%p) <%02i-%i> "
 				"cmnd=0x%02x Missed %i bytes\n",
-				cmd->serial_number, cmd->device->id, cmd->device->lun,
+				cmd, cmd->device->id, cmd->device->lun,
 				cmd->cmnd[0], srb->total_xfer_length);
 	}
 
@@ -3508,8 +3507,8 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 	if (srb == acb->tmp_srb)
 		dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
 	else {
-		dprintkdbg(DBG_0, "srb_done: (pid#%li) done result=0x%08x\n",
-			cmd->serial_number, cmd->result);
+		dprintkdbg(DBG_0, "srb_done: (0x%p) done result=0x%08x\n",
+			cmd, cmd->result);
 		srb_free_insert(acb, srb);
 	}
 	pci_unmap_srb(acb, srb);
@@ -3538,7 +3537,7 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
 			p = srb->cmd;
 			dir = p->sc_data_direction;
 			result = MK_RES(0, did_flag, 0, 0);
-			printk("G:%li(%02i-%i) ", p->serial_number,
+			printk("G:%p(%02i-%i) ", p,
 			       p->device->id, p->device->lun);
 			srb_going_remove(dcb, srb);
 			free_tag(dcb, srb);
@@ -3568,7 +3567,7 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
 			p = srb->cmd;
 
 			result = MK_RES(0, did_flag, 0, 0);
-			printk("W:%li<%02i-%i>", p->serial_number, p->device->id,
+			printk("W:%p<%02i-%i>", p, p->device->id,
 			       p->device->lun);
 			srb_waiting_remove(dcb, srb);
 			srb_free_insert(acb, srb);
@@ -3677,8 +3676,8 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 		struct ScsiReqBlk *srb)
 {
 	struct scsi_cmnd *cmd = srb->cmd;
-	dprintkdbg(DBG_1, "request_sense: (pid#%li) <%02i-%i>\n",
-		cmd->serial_number, cmd->device->id, cmd->device->lun);
+	dprintkdbg(DBG_1, "request_sense: (0x%p) <%02i-%i>\n",
+		cmd, cmd->device->id, cmd->device->lun);
 
 	srb->flag |= AUTO_REQSENSE;
 	srb->adapter_status = 0;
@@ -3708,8 +3707,8 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 
 	if (start_scsi(acb, dcb, srb)) {	/* Should only happen, if sb. else grabs the bus */
 		dprintkl(KERN_DEBUG,
-			"request_sense: (pid#%li) failed <%02i-%i>\n",
-			srb->cmd->serial_number, dcb->target_id, dcb->target_lun);
+			"request_sense: (0x%p) failed <%02i-%i>\n",
+			srb->cmd, dcb->target_id, dcb->target_lun);
 		srb_going_to_waiting_move(dcb, srb);
 		waiting_set_timer(acb, HZ / 100);
 	}
@@ -4717,13 +4716,13 @@ static int dc395x_proc_info(struct Scsi_Host *host, char *buffer,
 				dcb->target_id, dcb->target_lun,
 				list_size(&dcb->srb_waiting_list));
                 list_for_each_entry(srb, &dcb->srb_waiting_list, list)
-			SPRINTF(" %li", srb->cmd->serial_number);
+			SPRINTF(" %p", srb->cmd);
 		if (!list_empty(&dcb->srb_going_list))
 			SPRINTF("\nDCB (%02i-%i): Going  : %i:",
 				dcb->target_id, dcb->target_lun,
 				list_size(&dcb->srb_going_list));
 		list_for_each_entry(srb, &dcb->srb_going_list, list)
-			SPRINTF(" %li", srb->cmd->serial_number);
+			SPRINTF(" %p", srb->cmd);
 		if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
 			SPRINTF("\n");
 	}
diff --git a/drivers/scsi/dc395x.h b/drivers/scsi/dc395x.h
index b38360e5fe4..fbf35e37701 100644
--- a/drivers/scsi/dc395x.h
+++ b/drivers/scsi/dc395x.h
@@ -617,7 +617,7 @@ struct ScsiInqData
 #define NTC_DO_SEND_START		0x08	/* Send start command SPINUP		*/
 #define NTC_DO_DISCONNECT		0x04	/* Enable SCSI disconnect		*/
 #define NTC_DO_SYNC_NEGO		0x02	/* Sync negotiation			*/
-#define NTC_DO_PARITY_CHK		0x01	/* (it sould define at NAC)		*/
+#define NTC_DO_PARITY_CHK		0x01	/* (it should define at NAC)		*/
 						/* Parity check enable			*/
 
 /************************************************************************/
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index 564e6ecd17c..0119b814779 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -394,12 +394,14 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data)
 	unsigned long flags;
 	struct scsi_device *sdev;
 	struct scsi_device_handler *scsi_dh = NULL;
+	struct device *dev = NULL;
 
 	spin_lock_irqsave(q->queue_lock, flags);
 	sdev = q->queuedata;
 	if (sdev && sdev->scsi_dh_data)
 		scsi_dh = sdev->scsi_dh_data->scsi_dh;
-	if (!scsi_dh || !get_device(&sdev->sdev_gendev) ||
+	dev = get_device(&sdev->sdev_gendev);
+	if (!scsi_dh || !dev ||
 	    sdev->sdev_state == SDEV_CANCEL ||
 	    sdev->sdev_state == SDEV_DEL)
 		err = SCSI_DH_NOSYS;
@@ -410,12 +412,13 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data)
 	if (err) {
 		if (fn)
 			fn(data, err);
-		return err;
+		goto out;
 	}
 
 	if (scsi_dh->activate)
 		err = scsi_dh->activate(sdev, fn, data);
-	put_device(&sdev->sdev_gendev);
+out:
+	put_device(dev);
 	return err;
 }
 EXPORT_SYMBOL_GPL(scsi_dh_activate);
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 7cae0bc8539..6fec9fe5dc3 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -541,7 +541,7 @@ static int alua_check_sense(struct scsi_device *sdev,
  *
  * Evaluate the Target Port Group State.
  * Returns SCSI_DH_DEV_OFFLINED if the path is
- * found to be unuseable.
+ * found to be unusable.
  */
 static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 {
@@ -620,7 +620,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 		break;
 	case TPGS_STATE_OFFLINE:
 	case TPGS_STATE_UNAVAILABLE:
-		/* Path unuseable for unavailable/offline */
+		/* Path unusable for unavailable/offline */
 		err = SCSI_DH_DEV_OFFLINED;
 		break;
 	default:
@@ -782,7 +782,7 @@ static int alua_bus_attach(struct scsi_device *sdev)
 	h->sdev = sdev;
 
 	err = alua_initialize(sdev, h);
-	if (err != SCSI_DH_OK)
+	if ((err != SCSI_DH_OK) && (err != SCSI_DH_DEV_OFFLINED))
 		goto failed;
 
 	if (!try_module_get(THIS_MODULE))
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 293c183dfe6..e7fc70d6b47 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -182,14 +182,24 @@ struct rdac_dh_data {
 	struct rdac_controller	*ctlr;
 #define UNINITIALIZED_LUN	(1 << 8)
 	unsigned		lun;
+
+#define RDAC_MODE		0
+#define RDAC_MODE_AVT		1
+#define RDAC_MODE_IOSHIP	2
+	unsigned char		mode;
+
 #define RDAC_STATE_ACTIVE	0
 #define RDAC_STATE_PASSIVE	1
 	unsigned char		state;
 
 #define RDAC_LUN_UNOWNED	0
 #define RDAC_LUN_OWNED		1
-#define RDAC_LUN_AVT		2
 	char			lun_state;
+
+#define RDAC_PREFERRED		0
+#define RDAC_NON_PREFERRED	1
+	char			preferred;
+
 	unsigned char		sense[SCSI_SENSE_BUFFERSIZE];
 	union			{
 		struct c2_inquiry c2;
@@ -199,11 +209,15 @@ struct rdac_dh_data {
 	} inq;
 };
 
+static const char *mode[] = {
+	"RDAC",
+	"AVT",
+	"IOSHIP",
+};
 static const char *lun_state[] =
 {
 	"unowned",
 	"owned",
-	"owned (AVT mode)",
 };
 
 struct rdac_queue_data {
@@ -458,25 +472,33 @@ static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
 	int err;
 	struct c9_inquiry *inqp;
 
-	h->lun_state = RDAC_LUN_UNOWNED;
 	h->state = RDAC_STATE_ACTIVE;
 	err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c9;
-		if ((inqp->avte_cvp >> 7) == 0x1) {
-			/* LUN in AVT mode */
-			sdev_printk(KERN_NOTICE, sdev,
-				    "%s: AVT mode detected\n",
-				    RDAC_NAME);
-			h->lun_state = RDAC_LUN_AVT;
-		} else if ((inqp->avte_cvp & 0x1) != 0) {
-			/* LUN was owned by the controller */
+		/* detect the operating mode */
+		if ((inqp->avte_cvp >> 5) & 0x1)
+			h->mode = RDAC_MODE_IOSHIP; /* LUN in IOSHIP mode */
+		else if (inqp->avte_cvp >> 7)
+			h->mode = RDAC_MODE_AVT; /* LUN in AVT mode */
+		else
+			h->mode = RDAC_MODE; /* LUN in RDAC mode */
+
+		/* Update ownership */
+		if (inqp->avte_cvp & 0x1)
 			h->lun_state = RDAC_LUN_OWNED;
+		else {
+			h->lun_state = RDAC_LUN_UNOWNED;
+			if (h->mode == RDAC_MODE)
+				h->state = RDAC_STATE_PASSIVE;
 		}
-	}
 
-	if (h->lun_state == RDAC_LUN_UNOWNED)
-		h->state = RDAC_STATE_PASSIVE;
+		/* Update path prio*/
+		if (inqp->path_prio & 0x1)
+			h->preferred = RDAC_PREFERRED;
+		else
+			h->preferred = RDAC_NON_PREFERRED;
+	}
 
 	return err;
 }
@@ -648,12 +670,27 @@ static int rdac_activate(struct scsi_device *sdev,
 {
 	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int err = SCSI_DH_OK;
+	int act = 0;
 
 	err = check_ownership(sdev, h);
 	if (err != SCSI_DH_OK)
 		goto done;
 
-	if (h->lun_state == RDAC_LUN_UNOWNED) {
+	switch (h->mode) {
+	case RDAC_MODE:
+		if (h->lun_state == RDAC_LUN_UNOWNED)
+			act = 1;
+		break;
+	case RDAC_MODE_IOSHIP:
+		if ((h->lun_state == RDAC_LUN_UNOWNED) &&
+		    (h->preferred == RDAC_PREFERRED))
+			act = 1;
+		break;
+	default:
+		break;
+	}
+
+	if (act) {
 		err = queue_mode_select(sdev, fn, data);
 		if (err == SCSI_DH_OK)
 			return 0;
@@ -836,8 +873,9 @@ static int rdac_bus_attach(struct scsi_device *sdev)
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 
 	sdev_printk(KERN_NOTICE, sdev,
-		    "%s: LUN %d (%s)\n",
-		    RDAC_NAME, h->lun, lun_state[(int)h->lun_state]);
+		    "%s: LUN %d (%s) (%s)\n",
+		    RDAC_NAME, h->lun, mode[(int)h->mode],
+		    lun_state[(int)h->lun_state]);
 
 	return 0;
 
diff --git a/drivers/scsi/dpt/sys_info.h b/drivers/scsi/dpt/sys_info.h
index a90c4cb8ea8..a4aa1c31ff7 100644
--- a/drivers/scsi/dpt/sys_info.h
+++ b/drivers/scsi/dpt/sys_info.h
@@ -79,9 +79,9 @@
    typedef struct  {
 #endif
 
-   uSHORT       cylinders;      /* Upto 1024 */
-   uCHAR        heads;          /* Upto 255 */
-   uCHAR        sectors;        /* Upto 63 */
+   uSHORT       cylinders;      /* Up to 1024 */
+   uCHAR        heads;          /* Up to 255 */
+   uCHAR        sectors;        /* Up to 63 */
 
 #ifdef  __cplusplus
 
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index cffcb108ac9..b4f6c9a84e7 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -780,7 +780,7 @@ static int adpt_abort(struct scsi_cmnd * cmd)
 		return FAILED;
 	}
 	pHba = (adpt_hba*) cmd->device->host->hostdata[0];
-	printk(KERN_INFO"%s: Trying to Abort cmd=%ld\n",pHba->name, cmd->serial_number);
+	printk(KERN_INFO"%s: Trying to Abort\n",pHba->name);
 	if ((dptdevice = (void*) (cmd->device->hostdata)) == NULL) {
 		printk(KERN_ERR "%s: Unable to abort: No device in cmnd\n",pHba->name);
 		return FAILED;
@@ -802,10 +802,10 @@ static int adpt_abort(struct scsi_cmnd * cmd)
 			printk(KERN_INFO"%s: Abort cmd not supported\n",pHba->name);
 			return FAILED;
 		}
-		printk(KERN_INFO"%s: Abort cmd=%ld failed.\n",pHba->name, cmd->serial_number);
+		printk(KERN_INFO"%s: Abort failed.\n",pHba->name);
 		return FAILED;
 	} 
-	printk(KERN_INFO"%s: Abort cmd=%ld complete.\n",pHba->name, cmd->serial_number);
+	printk(KERN_INFO"%s: Abort complete.\n",pHba->name);
 	return SUCCESS;
 }
 
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index 53925ac178f..94de88955a9 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -63,7 +63,7 @@
  *          ep:[y|n]      eisa_probe=[1|0]  CONFIG_EISA defined
  *          pp:[y|n]      pci_probe=[1|0]   CONFIG_PCI  defined
  *
- *          The default action is to perform probing if the corrisponding
+ *          The default action is to perform probing if the corresponding
  *          bus is configured and to skip probing otherwise.
  *
  *        + If pci_probe is in effect and a list of I/O  ports is specified
@@ -1766,8 +1766,8 @@ static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
 	struct mscp *cpp;
 
 	if (SCpnt->host_scribble)
-		panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
-		      ha->board_name, SCpnt->serial_number, SCpnt);
+		panic("%s: qcomm, SCpnt %p already active.\n",
+		      ha->board_name, SCpnt);
 
 	/* i is the mailbox number, look for the first free mailbox
 	   starting from last_cp_used */
@@ -1801,7 +1801,7 @@ static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
 
 	if (do_trace)
 		scmd_printk(KERN_INFO, SCpnt,
-			"qcomm, mbox %d, pid %ld.\n", i, SCpnt->serial_number);
+			"qcomm, mbox %d.\n", i);
 
 	cpp->reqsen = 1;
 	cpp->dispri = 1;
@@ -1833,8 +1833,7 @@ static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
 	if (do_dma(shost->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
 		unmap_dma(i, ha);
 		SCpnt->host_scribble = NULL;
-		scmd_printk(KERN_INFO, SCpnt,
-			"qcomm, pid %ld, adapter busy.\n", SCpnt->serial_number);
+		scmd_printk(KERN_INFO, SCpnt, "qcomm, adapter busy.\n");
 		return 1;
 	}
 
@@ -1851,14 +1850,12 @@ static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
 	unsigned int i;
 
 	if (SCarg->host_scribble == NULL) {
-		scmd_printk(KERN_INFO, SCarg,
-			"abort, pid %ld inactive.\n", SCarg->serial_number);
+		scmd_printk(KERN_INFO, SCarg, "abort, cmd inactive.\n");
 		return SUCCESS;
 	}
 
 	i = *(unsigned int *)SCarg->host_scribble;
-	scmd_printk(KERN_WARNING, SCarg,
-		"abort, mbox %d, pid %ld.\n", i, SCarg->serial_number);
+	scmd_printk(KERN_WARNING, SCarg, "abort, mbox %d.\n", i);
 
 	if (i >= shost->can_queue)
 		panic("%s: abort, invalid SCarg->host_scribble.\n", ha->board_name);
@@ -1902,8 +1899,8 @@ static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
 		SCarg->result = DID_ABORT << 16;
 		SCarg->host_scribble = NULL;
 		ha->cp_stat[i] = FREE;
-		printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
-		       ha->board_name, i, SCarg->serial_number);
+		printk("%s, abort, mbox %d ready, DID_ABORT, done.\n",
+		       ha->board_name, i);
 		SCarg->scsi_done(SCarg);
 		return SUCCESS;
 	}
@@ -1919,13 +1916,12 @@ static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
 	struct Scsi_Host *shost = SCarg->device->host;
 	struct hostdata *ha = (struct hostdata *)shost->hostdata;
 
-	scmd_printk(KERN_INFO, SCarg,
-		"reset, enter, pid %ld.\n", SCarg->serial_number);
+	scmd_printk(KERN_INFO, SCarg, "reset, enter.\n");
 
 	spin_lock_irq(shost->host_lock);
 
 	if (SCarg->host_scribble == NULL)
-		printk("%s: reset, pid %ld inactive.\n", ha->board_name, SCarg->serial_number);
+		printk("%s: reset, inactive.\n", ha->board_name);
 
 	if (ha->in_reset) {
 		printk("%s: reset, exit, already in reset.\n", ha->board_name);
@@ -1964,14 +1960,14 @@ static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
 
 		if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
 			ha->cp_stat[i] = ABORTING;
-			printk("%s: reset, mbox %d aborting, pid %ld.\n",
-			       ha->board_name, i, SCpnt->serial_number);
+			printk("%s: reset, mbox %d aborting.\n",
+			       ha->board_name, i);
 		}
 
 		else {
 			ha->cp_stat[i] = IN_RESET;
-			printk("%s: reset, mbox %d in reset, pid %ld.\n",
-			       ha->board_name, i, SCpnt->serial_number);
+			printk("%s: reset, mbox %d in reset.\n",
+			       ha->board_name, i);
 		}
 
 		if (SCpnt->host_scribble == NULL)
@@ -2025,8 +2021,8 @@ static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
 			ha->cp_stat[i] = LOCKED;
 
 			printk
-			    ("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
-			     ha->board_name, i, SCpnt->serial_number);
+			    ("%s, reset, mbox %d locked, DID_RESET, done.\n",
+			     ha->board_name, i);
 		}
 
 		else if (ha->cp_stat[i] == ABORTING) {
@@ -2039,8 +2035,8 @@ static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
 			ha->cp_stat[i] = FREE;
 
 			printk
-			    ("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
-			     ha->board_name, i, SCpnt->serial_number);
+			    ("%s, reset, mbox %d aborting, DID_RESET, done.\n",
+			     ha->board_name, i);
 		}
 
 		else
@@ -2054,7 +2050,7 @@ static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
 	do_trace = 0;
 
 	if (arg_done)
-		printk("%s: reset, exit, pid %ld done.\n", ha->board_name, SCarg->serial_number);
+		printk("%s: reset, exit, done.\n", ha->board_name);
 	else
 		printk("%s: reset, exit.\n", ha->board_name);
 
@@ -2238,10 +2234,10 @@ static int reorder(struct hostdata *ha, unsigned long cursec,
 			cpp = &ha->cp[k];
 			SCpnt = cpp->SCpnt;
 			scmd_printk(KERN_INFO, SCpnt,
-			    "%s pid %ld mb %d fc %d nr %d sec %ld ns %u"
+			    "%s mb %d fc %d nr %d sec %ld ns %u"
 			     " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
 			     (ihdlr ? "ihdlr" : "qcomm"),
-			     SCpnt->serial_number, k, flushcount,
+			     k, flushcount,
 			     n_ready, blk_rq_pos(SCpnt->request),
 			     blk_rq_sectors(SCpnt->request), cursec, YESNO(s),
 			     YESNO(r), YESNO(rev), YESNO(input_only),
@@ -2285,10 +2281,10 @@ static void flush_dev(struct scsi_device *dev, unsigned long cursec,
 
 		if (do_dma(dev->host->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
 			scmd_printk(KERN_INFO, SCpnt,
-			    "%s, pid %ld, mbox %d, adapter"
+			    "%s, mbox %d, adapter"
 			     " busy, will abort.\n",
 			     (ihdlr ? "ihdlr" : "qcomm"),
-			     SCpnt->serial_number, k);
+			     k);
 			ha->cp_stat[k] = ABORTING;
 			continue;
 		}
@@ -2398,12 +2394,12 @@ static irqreturn_t ihdlr(struct Scsi_Host *shost)
 		panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", ha->board_name, i);
 
 	if (SCpnt->host_scribble == NULL)
-		panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", ha->board_name,
-		      i, SCpnt->serial_number, SCpnt);
+		panic("%s: ihdlr, mbox %d, SCpnt %p garbled.\n", ha->board_name,
+		      i, SCpnt);
 
 	if (*(unsigned int *)SCpnt->host_scribble != i)
-		panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
-		      ha->board_name, i, SCpnt->serial_number,
+		panic("%s: ihdlr, mbox %d, index mismatch %d.\n",
+		      ha->board_name, i,
 		      *(unsigned int *)SCpnt->host_scribble);
 
 	sync_dma(i, ha);
@@ -2449,11 +2445,11 @@ static irqreturn_t ihdlr(struct Scsi_Host *shost)
 		if (spp->target_status && SCpnt->device->type == TYPE_DISK &&
 		    (!(tstatus == CHECK_CONDITION && ha->iocount <= 1000 &&
 		       (SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
-			printk("%s: ihdlr, target %d.%d:%d, pid %ld, "
+			printk("%s: ihdlr, target %d.%d:%d, "
 			       "target_status 0x%x, sense key 0x%x.\n",
 			       ha->board_name,
 			       SCpnt->device->channel, SCpnt->device->id,
-			       SCpnt->device->lun, SCpnt->serial_number,
+			       SCpnt->device->lun,
 			       spp->target_status, SCpnt->sense_buffer[2]);
 
 		ha->target_to[SCpnt->device->id][SCpnt->device->channel] = 0;
@@ -2522,9 +2518,9 @@ static irqreturn_t ihdlr(struct Scsi_Host *shost)
 	    do_trace || msg_byte(spp->target_status))
 #endif
 		scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"
-		       " pid %ld, reg 0x%x, count %d.\n",
+		       " reg 0x%x, count %d.\n",
 		       i, spp->adapter_status, spp->target_status,
-		       SCpnt->serial_number, reg, ha->iocount);
+		       reg, ha->iocount);
 
 	unmap_dma(i, ha);
 
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 4a9641e69f5..d5f8362335d 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -372,8 +372,7 @@ static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
 	cp->status = USED;	/* claim free slot */
 
 	DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
-		"eata_pio_queue pid %ld, y %d\n",
-		cmd->serial_number, y));
+		"eata_pio_queue 0x%p, y %d\n", cmd, y));
 
 	cmd->scsi_done = (void *) done;
 
@@ -417,8 +416,8 @@ static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
 	if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) {
 		cmd->result = DID_BUS_BUSY << 16;
 		scmd_printk(KERN_NOTICE, cmd,
-			"eata_pio_queue pid %ld, HBA busy, "
-			"returning DID_BUS_BUSY, done.\n", cmd->serial_number);
+			"eata_pio_queue pid 0x%p, HBA busy, "
+			"returning DID_BUS_BUSY, done.\n", cmd);
 		done(cmd);
 		cp->status = FREE;
 		return 0;
@@ -432,8 +431,8 @@ static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
 		outw(0, base + HA_RDATA);
 
 	DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
-		"Queued base %#.4lx pid: %ld "
-		"slot %d irq %d\n", sh->base, cmd->serial_number, y, sh->irq));
+		"Queued base %#.4lx cmd: 0x%p "
+		"slot %d irq %d\n", sh->base, cmd, y, sh->irq));
 
 	return 0;
 }
@@ -445,8 +444,7 @@ static int eata_pio_abort(struct scsi_cmnd *cmd)
 	unsigned int loop = 100;
 
 	DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
-		"eata_pio_abort called pid: %ld\n",
-		cmd->serial_number));
+		"eata_pio_abort called pid: 0x%p\n", cmd));
 
 	while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
 		if (--loop == 0) {
@@ -481,8 +479,7 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd)
 	struct Scsi_Host *host = cmd->device->host;
 
 	DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
-		"eata_pio_reset called pid:%ld\n",
-		cmd->serial_number));
+		"eata_pio_reset called\n"));
 
 	spin_lock_irq(host->host_lock);
 
@@ -501,7 +498,7 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd)
 
 		sp = HD(cmd)->ccb[x].cmd;
 		HD(cmd)->ccb[x].status = RESET;
-		printk(KERN_WARNING "eata_pio_reset: slot %d in reset, pid %ld.\n", x, sp->serial_number);
+		printk(KERN_WARNING "eata_pio_reset: slot %d in reset.\n", x);
 
 		if (sp == NULL)
 			panic("eata_pio_reset: slot %d, sp==NULL.\n", x);
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 57558523c1b..9a1af1d6071 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -708,8 +708,7 @@ static void esp_maybe_execute_command(struct esp *esp)
 	tp = &esp->target[tgt];
 	lp = dev->hostdata;
 
-	list_del(&ent->list);
-	list_add(&ent->list, &esp->active_cmds);
+	list_move(&ent->list, &esp->active_cmds);
 
 	esp->active_cmd = ent;
 
@@ -1244,8 +1243,7 @@ static int esp_finish_select(struct esp *esp)
 		/* Now that the state is unwound properly, put back onto
 		 * the issue queue.  This command is no longer active.
 		 */
-		list_del(&ent->list);
-		list_add(&ent->list, &esp->queued_cmds);
+		list_move(&ent->list, &esp->queued_cmds);
 		esp->active_cmd = NULL;
 
 		/* Return value ignored by caller, it directly invokes
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index bde6ee5333e..cc23bd9480b 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -381,6 +381,42 @@ out:
 }
 
 /**
+ * fcoe_interface_release() - fcoe_port kref release function
+ * @kref: Embedded reference count in an fcoe_interface struct
+ */
+static void fcoe_interface_release(struct kref *kref)
+{
+	struct fcoe_interface *fcoe;
+	struct net_device *netdev;
+
+	fcoe = container_of(kref, struct fcoe_interface, kref);
+	netdev = fcoe->netdev;
+	/* tear-down the FCoE controller */
+	fcoe_ctlr_destroy(&fcoe->ctlr);
+	kfree(fcoe);
+	dev_put(netdev);
+	module_put(THIS_MODULE);
+}
+
+/**
+ * fcoe_interface_get() - Get a reference to a FCoE interface
+ * @fcoe: The FCoE interface to be held
+ */
+static inline void fcoe_interface_get(struct fcoe_interface *fcoe)
+{
+	kref_get(&fcoe->kref);
+}
+
+/**
+ * fcoe_interface_put() - Put a reference to a FCoE interface
+ * @fcoe: The FCoE interface to be released
+ */
+static inline void fcoe_interface_put(struct fcoe_interface *fcoe)
+{
+	kref_put(&fcoe->kref, fcoe_interface_release);
+}
+
+/**
  * fcoe_interface_cleanup() - Clean up a FCoE interface
  * @fcoe: The FCoE interface to be cleaned up
  *
@@ -392,6 +428,21 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
 	struct fcoe_ctlr *fip = &fcoe->ctlr;
 	u8 flogi_maddr[ETH_ALEN];
 	const struct net_device_ops *ops;
+	struct fcoe_port *port = lport_priv(fcoe->ctlr.lp);
+
+	FCOE_NETDEV_DBG(netdev, "Destroying interface\n");
+
+	/* Logout of the fabric */
+	fc_fabric_logoff(fcoe->ctlr.lp);
+
+	/* Cleanup the fc_lport */
+	fc_lport_destroy(fcoe->ctlr.lp);
+
+	/* Stop the transmit retry timer */
+	del_timer_sync(&port->timer);
+
+	/* Free existing transmit skbs */
+	fcoe_clean_pending_queue(fcoe->ctlr.lp);
 
 	/*
 	 * Don't listen for Ethernet packets anymore.
@@ -414,6 +465,9 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
 	} else
 		dev_mc_del(netdev, FIP_ALL_ENODE_MACS);
 
+	if (!is_zero_ether_addr(port->data_src_addr))
+		dev_uc_del(netdev, port->data_src_addr);
+
 	/* Tell the LLD we are done w/ FCoE */
 	ops = netdev->netdev_ops;
 	if (ops->ndo_fcoe_disable) {
@@ -421,42 +475,7 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
 			FCOE_NETDEV_DBG(netdev, "Failed to disable FCoE"
 					" specific feature for LLD.\n");
 	}
-}
-
-/**
- * fcoe_interface_release() - fcoe_port kref release function
- * @kref: Embedded reference count in an fcoe_interface struct
- */
-static void fcoe_interface_release(struct kref *kref)
-{
-	struct fcoe_interface *fcoe;
-	struct net_device *netdev;
-
-	fcoe = container_of(kref, struct fcoe_interface, kref);
-	netdev = fcoe->netdev;
-	/* tear-down the FCoE controller */
-	fcoe_ctlr_destroy(&fcoe->ctlr);
-	kfree(fcoe);
-	dev_put(netdev);
-	module_put(THIS_MODULE);
-}
-
-/**
- * fcoe_interface_get() - Get a reference to a FCoE interface
- * @fcoe: The FCoE interface to be held
- */
-static inline void fcoe_interface_get(struct fcoe_interface *fcoe)
-{
-	kref_get(&fcoe->kref);
-}
-
-/**
- * fcoe_interface_put() - Put a reference to a FCoE interface
- * @fcoe: The FCoE interface to be released
- */
-static inline void fcoe_interface_put(struct fcoe_interface *fcoe)
-{
-	kref_put(&fcoe->kref, fcoe_interface_release);
+	fcoe_interface_put(fcoe);
 }
 
 /**
@@ -821,39 +840,9 @@ skip_oem:
  * fcoe_if_destroy() - Tear down a SW FCoE instance
  * @lport: The local port to be destroyed
  *
- * Locking: must be called with the RTNL mutex held and RTNL mutex
- * needed to be dropped by this function since not dropping RTNL
- * would cause circular locking warning on synchronous fip worker
- * cancelling thru fcoe_interface_put invoked by this function.
- *
  */
 static void fcoe_if_destroy(struct fc_lport *lport)
 {
-	struct fcoe_port *port = lport_priv(lport);
-	struct fcoe_interface *fcoe = port->priv;
-	struct net_device *netdev = fcoe->netdev;
-
-	FCOE_NETDEV_DBG(netdev, "Destroying interface\n");
-
-	/* Logout of the fabric */
-	fc_fabric_logoff(lport);
-
-	/* Cleanup the fc_lport */
-	fc_lport_destroy(lport);
-
-	/* Stop the transmit retry timer */
-	del_timer_sync(&port->timer);
-
-	/* Free existing transmit skbs */
-	fcoe_clean_pending_queue(lport);
-
-	if (!is_zero_ether_addr(port->data_src_addr))
-		dev_uc_del(netdev, port->data_src_addr);
-	rtnl_unlock();
-
-	/* receives may not be stopped until after this */
-	fcoe_interface_put(fcoe);
-
 	/* Free queued packets for the per-CPU receive threads */
 	fcoe_percpu_clean(lport);
 
@@ -1783,23 +1772,8 @@ static int fcoe_disable(struct net_device *netdev)
 	int rc = 0;
 
 	mutex_lock(&fcoe_config_mutex);
-#ifdef CONFIG_FCOE_MODULE
-	/*
-	 * Make sure the module has been initialized, and is not about to be
-	 * removed.  Module paramter sysfs files are writable before the
-	 * module_init function is called and after module_exit.
-	 */
-	if (THIS_MODULE->state != MODULE_STATE_LIVE) {
-		rc = -ENODEV;
-		goto out_nodev;
-	}
-#endif
-
-	if (!rtnl_trylock()) {
-		mutex_unlock(&fcoe_config_mutex);
-		return -ERESTARTSYS;
-	}
 
+	rtnl_lock();
 	fcoe = fcoe_hostlist_lookup_port(netdev);
 	rtnl_unlock();
 
@@ -1809,7 +1783,6 @@ static int fcoe_disable(struct net_device *netdev)
 	} else
 		rc = -ENODEV;
 
-out_nodev:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
 }
@@ -1828,22 +1801,7 @@ static int fcoe_enable(struct net_device *netdev)
 	int rc = 0;
 
 	mutex_lock(&fcoe_config_mutex);
-#ifdef CONFIG_FCOE_MODULE
-	/*
-	 * Make sure the module has been initialized, and is not about to be
-	 * removed.  Module paramter sysfs files are writable before the
-	 * module_init function is called and after module_exit.
-	 */
-	if (THIS_MODULE->state != MODULE_STATE_LIVE) {
-		rc = -ENODEV;
-		goto out_nodev;
-	}
-#endif
-	if (!rtnl_trylock()) {
-		mutex_unlock(&fcoe_config_mutex);
-		return -ERESTARTSYS;
-	}
-
+	rtnl_lock();
 	fcoe = fcoe_hostlist_lookup_port(netdev);
 	rtnl_unlock();
 
@@ -1852,7 +1810,6 @@ static int fcoe_enable(struct net_device *netdev)
 	else if (!fcoe_link_ok(fcoe->ctlr.lp))
 		fcoe_ctlr_link_up(&fcoe->ctlr);
 
-out_nodev:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
 }
@@ -1868,35 +1825,22 @@ out_nodev:
 static int fcoe_destroy(struct net_device *netdev)
 {
 	struct fcoe_interface *fcoe;
+	struct fc_lport *lport;
 	int rc = 0;
 
 	mutex_lock(&fcoe_config_mutex);
-#ifdef CONFIG_FCOE_MODULE
-	/*
-	 * Make sure the module has been initialized, and is not about to be
-	 * removed.  Module paramter sysfs files are writable before the
-	 * module_init function is called and after module_exit.
-	 */
-	if (THIS_MODULE->state != MODULE_STATE_LIVE) {
-		rc = -ENODEV;
-		goto out_nodev;
-	}
-#endif
-	if (!rtnl_trylock()) {
-		mutex_unlock(&fcoe_config_mutex);
-		return -ERESTARTSYS;
-	}
-
+	rtnl_lock();
 	fcoe = fcoe_hostlist_lookup_port(netdev);
 	if (!fcoe) {
 		rtnl_unlock();
 		rc = -ENODEV;
 		goto out_nodev;
 	}
-	fcoe_interface_cleanup(fcoe);
+	lport = fcoe->ctlr.lp;
 	list_del(&fcoe->list);
-	/* RTNL mutex is dropped by fcoe_if_destroy */
-	fcoe_if_destroy(fcoe->ctlr.lp);
+	fcoe_interface_cleanup(fcoe);
+	rtnl_unlock();
+	fcoe_if_destroy(lport);
 out_nodev:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
@@ -1912,8 +1856,6 @@ static void fcoe_destroy_work(struct work_struct *work)
 
 	port = container_of(work, struct fcoe_port, destroy_work);
 	mutex_lock(&fcoe_config_mutex);
-	rtnl_lock();
-	/* RTNL mutex is dropped by fcoe_if_destroy */
 	fcoe_if_destroy(port->lport);
 	mutex_unlock(&fcoe_config_mutex);
 }
@@ -1948,23 +1890,7 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
 	struct fc_lport *lport;
 
 	mutex_lock(&fcoe_config_mutex);
-
-	if (!rtnl_trylock()) {
-		mutex_unlock(&fcoe_config_mutex);
-		return -ERESTARTSYS;
-	}
-
-#ifdef CONFIG_FCOE_MODULE
-	/*
-	 * Make sure the module has been initialized, and is not about to be
-	 * removed.  Module paramter sysfs files are writable before the
-	 * module_init function is called and after module_exit.
-	 */
-	if (THIS_MODULE->state != MODULE_STATE_LIVE) {
-		rc = -ENODEV;
-		goto out_nodev;
-	}
-#endif
+	rtnl_lock();
 
 	/* look for existing lport */
 	if (fcoe_hostlist_lookup(netdev)) {
@@ -2026,7 +1952,7 @@ out_nodev:
 int fcoe_link_speed_update(struct fc_lport *lport)
 {
 	struct net_device *netdev = fcoe_netdev(lport);
-	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+	struct ethtool_cmd ecmd;
 
 	if (!dev_ethtool_get_settings(netdev, &ecmd)) {
 		lport->link_supported_speeds &=
@@ -2037,11 +1963,14 @@ int fcoe_link_speed_update(struct fc_lport *lport)
 		if (ecmd.supported & SUPPORTED_10000baseT_Full)
 			lport->link_supported_speeds |=
 				FC_PORTSPEED_10GBIT;
-		if (ecmd.speed == SPEED_1000)
+		switch (ethtool_cmd_speed(&ecmd)) {
+		case SPEED_1000:
 			lport->link_speed = FC_PORTSPEED_1GBIT;
-		if (ecmd.speed == SPEED_10000)
+			break;
+		case SPEED_10000:
 			lport->link_speed = FC_PORTSPEED_10GBIT;
-
+			break;
+		}
 		return 0;
 	}
 	return -1;
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index c93f007e702..229e4af5508 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -656,7 +656,7 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct fc_lport *lport,
 		 * If non-FIP, we may have gotten an SID by accepting an FLOGI
 		 * from a point-to-point connection.  Switch to using
 		 * the source mac based on the SID.  The destination
-		 * MAC in this case would have been set by receving the
+		 * MAC in this case would have been set by receiving the
 		 * FLOGI.
 		 */
 		if (fip->state == FIP_ST_NON_FIP) {
@@ -978,10 +978,8 @@ static void fcoe_ctlr_recv_adv(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	 * the FCF that answers multicast solicitations, not the others that
 	 * are sending periodic multicast advertisements.
 	 */
-	if (mtu_valid) {
-		list_del(&fcf->list);
-		list_add(&fcf->list, &fip->fcfs);
-	}
+	if (mtu_valid)
+		list_move(&fcf->list, &fip->fcfs);
 
 	/*
 	 * If this is the first validated FCF, note the time and
@@ -1876,7 +1874,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip,
  * fcoe_ctlr_vn_rport_callback - Event handler for rport events.
  * @lport: The lport which is receiving the event
  * @rdata: remote port private data
- * @event: The event that occured
+ * @event: The event that occurred
  *
  * Locking Note:  The rport lock must not be held when calling this function.
  */
diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
index 258684101bf..f81f77c8569 100644
--- a/drivers/scsi/fcoe/fcoe_transport.c
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -335,7 +335,7 @@ out_attach:
 EXPORT_SYMBOL(fcoe_transport_attach);
 
 /**
- * fcoe_transport_attach - Detaches an FCoE transport
+ * fcoe_transport_detach - Detaches an FCoE transport
  * @ft: The fcoe transport to be attached
  *
  * Returns : 0 for success
@@ -343,6 +343,7 @@ EXPORT_SYMBOL(fcoe_transport_attach);
 int fcoe_transport_detach(struct fcoe_transport *ft)
 {
 	int rc = 0;
+	struct fcoe_netdev_mapping *nm = NULL, *tmp;
 
 	mutex_lock(&ft_mutex);
 	if (!ft->attached) {
@@ -352,6 +353,19 @@ int fcoe_transport_detach(struct fcoe_transport *ft)
 		goto out_attach;
 	}
 
+	/* remove netdev mapping for this transport as it is going away */
+	mutex_lock(&fn_mutex);
+	list_for_each_entry_safe(nm, tmp, &fcoe_netdevs, list) {
+		if (nm->ft == ft) {
+			LIBFCOE_TRANSPORT_DBG("transport %s going away, "
+				"remove its netdev mapping for %s\n",
+				ft->name, nm->netdev->name);
+			list_del(&nm->list);
+			kfree(nm);
+		}
+	}
+	mutex_unlock(&fn_mutex);
+
 	list_del(&ft->list);
 	ft->attached = false;
 	LIBFCOE_TRANSPORT_DBG("detaching transport %s\n", ft->name);
@@ -371,9 +385,9 @@ static int fcoe_transport_show(char *buffer, const struct kernel_param *kp)
 	i = j = sprintf(buffer, "Attached FCoE transports:");
 	mutex_lock(&ft_mutex);
 	list_for_each_entry(ft, &fcoe_transports, list) {
-		i += snprintf(&buffer[i], IFNAMSIZ, "%s ", ft->name);
-		if (i >= PAGE_SIZE)
+		if (i >= PAGE_SIZE - IFNAMSIZ)
 			break;
+		i += snprintf(&buffer[i], IFNAMSIZ, "%s ", ft->name);
 	}
 	mutex_unlock(&ft_mutex);
 	if (i == j)
@@ -530,9 +544,6 @@ static int fcoe_transport_create(const char *buffer, struct kernel_param *kp)
 	struct fcoe_transport *ft = NULL;
 	enum fip_state fip_mode = (enum fip_state)(long)kp->arg;
 
-	if (!mutex_trylock(&ft_mutex))
-		return restart_syscall();
-
 #ifdef CONFIG_LIBFCOE_MODULE
 	/*
 	 * Make sure the module has been initialized, and is not about to be
@@ -543,6 +554,8 @@ static int fcoe_transport_create(const char *buffer, struct kernel_param *kp)
 		goto out_nodev;
 #endif
 
+	mutex_lock(&ft_mutex);
+
 	netdev = fcoe_if_to_netdev(buffer);
 	if (!netdev) {
 		LIBFCOE_TRANSPORT_DBG("Invalid device %s.\n", buffer);
@@ -586,10 +599,7 @@ out_putdev:
 	dev_put(netdev);
 out_nodev:
 	mutex_unlock(&ft_mutex);
-	if (rc == -ERESTARTSYS)
-		return restart_syscall();
-	else
-		return rc;
+	return rc;
 }
 
 /**
@@ -608,9 +618,6 @@ static int fcoe_transport_destroy(const char *buffer, struct kernel_param *kp)
 	struct net_device *netdev = NULL;
 	struct fcoe_transport *ft = NULL;
 
-	if (!mutex_trylock(&ft_mutex))
-		return restart_syscall();
-
 #ifdef CONFIG_LIBFCOE_MODULE
 	/*
 	 * Make sure the module has been initialized, and is not about to be
@@ -621,6 +628,8 @@ static int fcoe_transport_destroy(const char *buffer, struct kernel_param *kp)
 		goto out_nodev;
 #endif
 
+	mutex_lock(&ft_mutex);
+
 	netdev = fcoe_if_to_netdev(buffer);
 	if (!netdev) {
 		LIBFCOE_TRANSPORT_DBG("invalid device %s.\n", buffer);
@@ -645,11 +654,7 @@ out_putdev:
 	dev_put(netdev);
 out_nodev:
 	mutex_unlock(&ft_mutex);
-
-	if (rc == -ERESTARTSYS)
-		return restart_syscall();
-	else
-		return rc;
+	return rc;
 }
 
 /**
@@ -667,9 +672,6 @@ static int fcoe_transport_disable(const char *buffer, struct kernel_param *kp)
 	struct net_device *netdev = NULL;
 	struct fcoe_transport *ft = NULL;
 
-	if (!mutex_trylock(&ft_mutex))
-		return restart_syscall();
-
 #ifdef CONFIG_LIBFCOE_MODULE
 	/*
 	 * Make sure the module has been initialized, and is not about to be
@@ -680,6 +682,8 @@ static int fcoe_transport_disable(const char *buffer, struct kernel_param *kp)
 		goto out_nodev;
 #endif
 
+	mutex_lock(&ft_mutex);
+
 	netdev = fcoe_if_to_netdev(buffer);
 	if (!netdev)
 		goto out_nodev;
@@ -716,9 +720,6 @@ static int fcoe_transport_enable(const char *buffer, struct kernel_param *kp)
 	struct net_device *netdev = NULL;
 	struct fcoe_transport *ft = NULL;
 
-	if (!mutex_trylock(&ft_mutex))
-		return restart_syscall();
-
 #ifdef CONFIG_LIBFCOE_MODULE
 	/*
 	 * Make sure the module has been initialized, and is not about to be
@@ -729,6 +730,8 @@ static int fcoe_transport_enable(const char *buffer, struct kernel_param *kp)
 		goto out_nodev;
 #endif
 
+	mutex_lock(&ft_mutex);
+
 	netdev = fcoe_if_to_netdev(buffer);
 	if (!netdev)
 		goto out_nodev;
@@ -743,10 +746,7 @@ out_putdev:
 	dev_put(netdev);
 out_nodev:
 	mutex_unlock(&ft_mutex);
-	if (rc == -ERESTARTSYS)
-		return restart_syscall();
-	else
-		return rc;
+	return rc;
 }
 
 /**
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 69b7aa54f43..643f6d500fe 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -174,7 +174,7 @@
  Future Domain sold DOS BIOS source for $250 and the UN*X driver source was
  $750, but these required a non-disclosure agreement, so even if I could
  have afforded them, they would *not* have been useful for writing this
- publically distributable driver.  Future Domain technical support has
+ publicly distributable driver.  Future Domain technical support has
  provided some information on the phone and have sent a few useful FAXs.
  They have been much more helpful since they started to recognize that the
  word "Linux" refers to an operating system :-).
diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
index 2b48d79bad9..3c53c3478ee 100644
--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -411,7 +411,7 @@ int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do)
 			err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
 			if (err)
 				shost_printk(KERN_ERR, fnic->lport->host,
-					     "fnic_alloc_rq_frame cant alloc"
+					     "fnic_alloc_rq_frame can't alloc"
 					     " frame\n");
 		}
 		tot_rq_work_done += cur_work_done;
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 22d02404d15..538b31c2cf5 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1123,7 +1123,7 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
 					    fc_lun.scsi_lun, io_req)) {
 			/*
 			 * Revert the cmd state back to old state, if
-			 * it hasnt changed in between. This cmd will get
+			 * it hasn't changed in between. This cmd will get
 			 * aborted later by scsi_eh, or cleaned up during
 			 * lun reset
 			 */
@@ -1208,7 +1208,7 @@ void fnic_terminate_rport_io(struct fc_rport *rport)
 					    fc_lun.scsi_lun, io_req)) {
 			/*
 			 * Revert the cmd state back to old state, if
-			 * it hasnt changed in between. This cmd will get
+			 * it hasn't changed in between. This cmd will get
 			 * aborted later by scsi_eh, or cleaned up during
 			 * lun reset
 			 */
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 427a56d3117..81182badfeb 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -566,7 +566,7 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
  *	@dst: buffer to read into
  *	@len: buffer length
  *
- *	Perform a psuedo DMA mode read from an NCR53C400 or equivalent
+ *	Perform a pseudo DMA mode read from an NCR53C400 or equivalent
  *	controller
  */
  
@@ -650,7 +650,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
  *	@dst: buffer to read into
  *	@len: buffer length
  *
- *	Perform a psuedo DMA mode read from an NCR53C400 or equivalent
+ *	Perform a pseudo DMA mode read from an NCR53C400 or equivalent
  *	controller
  */
 
diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h
index 120a0625a7b..d969855ac64 100644
--- a/drivers/scsi/gdth.h
+++ b/drivers/scsi/gdth.h
@@ -895,7 +895,7 @@ typedef struct {
         u8          ldr_no;                 /* log. drive no. */
         u8          rw_attribs;             /* r/w attributes */
         u8          cluster_type;           /* cluster properties */
-        u8          media_changed;          /* Flag:MOUNT/UNMOUNT occured */
+        u8          media_changed;          /* Flag:MOUNT/UNMOUNT occurred */
         u32         start_sec;              /* start sector */
     } hdr[MAX_LDRIVES];                         /* host drives */
     struct {
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 2ce26eb7a1e..50bb54150a7 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -300,7 +300,7 @@ static int __devinit gvp11_probe(struct zorro_dev *z,
 	/*
 	 * Rumors state that some GVP ram boards use the same product
 	 * code as the SCSI controllers. Therefore if the board-size
-	 * is not 64KB we asume it is a ram board and bail out.
+	 * is not 64KB we assume it is a ram board and bail out.
 	 */
 	if (zorro_resource_len(z) != 0x10000)
 		return -ENODEV;
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 415ad4fb50d..c6c0434d803 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -273,7 +273,7 @@ static ssize_t host_show_transport_mode(struct device *dev,
 			"performant" : "simple");
 }
 
-/* List of controllers which cannot be reset on kexec with reset_devices */
+/* List of controllers which cannot be hard reset on kexec with reset_devices */
 static u32 unresettable_controller[] = {
 	0x324a103C, /* Smart Array P712m */
 	0x324b103C, /* SmartArray P711m */
@@ -291,16 +291,45 @@ static u32 unresettable_controller[] = {
 	0x409D0E11, /* Smart Array 6400 EM */
 };
 
-static int ctlr_is_resettable(struct ctlr_info *h)
+/* List of controllers which cannot even be soft reset */
+static u32 soft_unresettable_controller[] = {
+	/* Exclude 640x boards.  These are two pci devices in one slot
+	 * which share a battery backed cache module.  One controls the
+	 * cache, the other accesses the cache through the one that controls
+	 * it.  If we reset the one controlling the cache, the other will
+	 * likely not be happy.  Just forbid resetting this conjoined mess.
+	 * The 640x isn't really supported by hpsa anyway.
+	 */
+	0x409C0E11, /* Smart Array 6400 */
+	0x409D0E11, /* Smart Array 6400 EM */
+};
+
+static int ctlr_is_hard_resettable(u32 board_id)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(unresettable_controller); i++)
-		if (unresettable_controller[i] == h->board_id)
+		if (unresettable_controller[i] == board_id)
+			return 0;
+	return 1;
+}
+
+static int ctlr_is_soft_resettable(u32 board_id)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(soft_unresettable_controller); i++)
+		if (soft_unresettable_controller[i] == board_id)
 			return 0;
 	return 1;
 }
 
+static int ctlr_is_resettable(u32 board_id)
+{
+	return ctlr_is_hard_resettable(board_id) ||
+		ctlr_is_soft_resettable(board_id);
+}
+
 static ssize_t host_show_resettable(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
@@ -308,7 +337,7 @@ static ssize_t host_show_resettable(struct device *dev,
 	struct Scsi_Host *shost = class_to_shost(dev);
 
 	h = shost_to_hba(shost);
-	return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h));
+	return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id));
 }
 
 static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
@@ -929,13 +958,6 @@ static void hpsa_slave_destroy(struct scsi_device *sdev)
 	/* nothing to do. */
 }
 
-static void hpsa_scsi_setup(struct ctlr_info *h)
-{
-	h->ndevices = 0;
-	h->scsi_host = NULL;
-	spin_lock_init(&h->devlock);
-}
-
 static void hpsa_free_sg_chain_blocks(struct ctlr_info *h)
 {
 	int i;
@@ -1006,8 +1028,7 @@ static void hpsa_unmap_sg_chain_block(struct ctlr_info *h,
 	pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
 }
 
-static void complete_scsi_command(struct CommandList *cp,
-	int timeout, u32 tag)
+static void complete_scsi_command(struct CommandList *cp)
 {
 	struct scsi_cmnd *cmd;
 	struct ctlr_info *h;
@@ -1308,7 +1329,7 @@ static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
 	int retry_count = 0;
 
 	do {
-		memset(c->err_info, 0, sizeof(c->err_info));
+		memset(c->err_info, 0, sizeof(*c->err_info));
 		hpsa_scsi_do_simple_cmd_core(h, c);
 		retry_count++;
 	} while (check_for_unit_attention(h, c) && retry_count <= 3);
@@ -1570,6 +1591,7 @@ static unsigned char *msa2xxx_model[] = {
 	"MSA2024",
 	"MSA2312",
 	"MSA2324",
+	"P2000 G3 SAS",
 	NULL,
 };
 
@@ -2751,6 +2773,26 @@ static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg)
 	}
 }
 
+static int __devinit hpsa_send_host_reset(struct ctlr_info *h,
+	unsigned char *scsi3addr, u8 reset_type)
+{
+	struct CommandList *c;
+
+	c = cmd_alloc(h);
+	if (!c)
+		return -ENOMEM;
+	fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
+		RAID_CTLR_LUNID, TYPE_MSG);
+	c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */
+	c->waiting = NULL;
+	enqueue_cmd_and_start_io(h, c);
+	/* Don't wait for completion, the reset won't complete.  Don't free
+	 * the command either.  This is the last command we will send before
+	 * re-initializing everything, so it doesn't matter and won't leak.
+	 */
+	return 0;
+}
+
 static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 	void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
 	int cmd_type)
@@ -2828,7 +2870,8 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.Type.Attribute = ATTR_SIMPLE;
 			c->Request.Type.Direction = XFER_NONE;
 			c->Request.Timeout = 0; /* Don't time out */
-			c->Request.CDB[0] =  0x01; /* RESET_MSG is 0x01 */
+			memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
+			c->Request.CDB[0] =  cmd;
 			c->Request.CDB[1] = 0x03;  /* Reset target above */
 			/* If bytes 4-7 are zero, it means reset the */
 			/* LunID device */
@@ -2936,7 +2979,7 @@ static inline void finish_cmd(struct CommandList *c, u32 raw_tag)
 {
 	removeQ(c);
 	if (likely(c->cmd_type == CMD_SCSI))
-		complete_scsi_command(c, 0, raw_tag);
+		complete_scsi_command(c);
 	else if (c->cmd_type == CMD_IOCTL_PEND)
 		complete(c->waiting);
 }
@@ -2994,6 +3037,63 @@ static inline u32 process_nonindexed_cmd(struct ctlr_info *h,
 	return next_command(h);
 }
 
+/* Some controllers, like p400, will give us one interrupt
+ * after a soft reset, even if we turned interrupts off.
+ * Only need to check for this in the hpsa_xxx_discard_completions
+ * functions.
+ */
+static int ignore_bogus_interrupt(struct ctlr_info *h)
+{
+	if (likely(!reset_devices))
+		return 0;
+
+	if (likely(h->interrupts_enabled))
+		return 0;
+
+	dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled "
+		"(known firmware bug.)  Ignoring.\n");
+
+	return 1;
+}
+
+static irqreturn_t hpsa_intx_discard_completions(int irq, void *dev_id)
+{
+	struct ctlr_info *h = dev_id;
+	unsigned long flags;
+	u32 raw_tag;
+
+	if (ignore_bogus_interrupt(h))
+		return IRQ_NONE;
+
+	if (interrupt_not_for_us(h))
+		return IRQ_NONE;
+	spin_lock_irqsave(&h->lock, flags);
+	while (interrupt_pending(h)) {
+		raw_tag = get_next_completion(h);
+		while (raw_tag != FIFO_EMPTY)
+			raw_tag = next_command(h);
+	}
+	spin_unlock_irqrestore(&h->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t hpsa_msix_discard_completions(int irq, void *dev_id)
+{
+	struct ctlr_info *h = dev_id;
+	unsigned long flags;
+	u32 raw_tag;
+
+	if (ignore_bogus_interrupt(h))
+		return IRQ_NONE;
+
+	spin_lock_irqsave(&h->lock, flags);
+	raw_tag = get_next_completion(h);
+	while (raw_tag != FIFO_EMPTY)
+		raw_tag = next_command(h);
+	spin_unlock_irqrestore(&h->lock, flags);
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id)
 {
 	struct ctlr_info *h = dev_id;
@@ -3132,11 +3232,10 @@ static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 	return 0;
 }
 
-#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0)
 #define hpsa_noop(p) hpsa_message(p, 3, 0)
 
 static int hpsa_controller_hard_reset(struct pci_dev *pdev,
-	void * __iomem vaddr, bool use_doorbell)
+	void * __iomem vaddr, u32 use_doorbell)
 {
 	u16 pmcsr;
 	int pos;
@@ -3147,8 +3246,7 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev,
 		 * other way using the doorbell register.
 		 */
 		dev_info(&pdev->dev, "using doorbell to reset controller\n");
-		writel(DOORBELL_CTLR_RESET, vaddr + SA5_DOORBELL);
-		msleep(1000);
+		writel(use_doorbell, vaddr + SA5_DOORBELL);
 	} else { /* Try to do it the PCI power state way */
 
 		/* Quoting from the Open CISS Specification: "The Power
@@ -3179,12 +3277,63 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev,
 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
 		pmcsr |= PCI_D0;
 		pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
-
-		msleep(500);
 	}
 	return 0;
 }
 
+static __devinit void init_driver_version(char *driver_version, int len)
+{
+	memset(driver_version, 0, len);
+	strncpy(driver_version, "hpsa " HPSA_DRIVER_VERSION, len - 1);
+}
+
+static __devinit int write_driver_ver_to_cfgtable(
+	struct CfgTable __iomem *cfgtable)
+{
+	char *driver_version;
+	int i, size = sizeof(cfgtable->driver_version);
+
+	driver_version = kmalloc(size, GFP_KERNEL);
+	if (!driver_version)
+		return -ENOMEM;
+
+	init_driver_version(driver_version, size);
+	for (i = 0; i < size; i++)
+		writeb(driver_version[i], &cfgtable->driver_version[i]);
+	kfree(driver_version);
+	return 0;
+}
+
+static __devinit void read_driver_ver_from_cfgtable(
+	struct CfgTable __iomem *cfgtable, unsigned char *driver_ver)
+{
+	int i;
+
+	for (i = 0; i < sizeof(cfgtable->driver_version); i++)
+		driver_ver[i] = readb(&cfgtable->driver_version[i]);
+}
+
+static __devinit int controller_reset_failed(
+	struct CfgTable __iomem *cfgtable)
+{
+
+	char *driver_ver, *old_driver_ver;
+	int rc, size = sizeof(cfgtable->driver_version);
+
+	old_driver_ver = kmalloc(2 * size, GFP_KERNEL);
+	if (!old_driver_ver)
+		return -ENOMEM;
+	driver_ver = old_driver_ver + size;
+
+	/* After a reset, the 32 bytes of "driver version" in the cfgtable
+	 * should have been changed, otherwise we know the reset failed.
+	 */
+	init_driver_version(old_driver_ver, size);
+	read_driver_ver_from_cfgtable(cfgtable, driver_ver);
+	rc = !memcmp(driver_ver, old_driver_ver, size);
+	kfree(old_driver_ver);
+	return rc;
+}
 /* This does a hard reset of the controller using PCI power management
  * states or the using the doorbell register.
  */
@@ -3195,10 +3344,10 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	u64 cfg_base_addr_index;
 	void __iomem *vaddr;
 	unsigned long paddr;
-	u32 misc_fw_support, active_transport;
+	u32 misc_fw_support;
 	int rc;
 	struct CfgTable __iomem *cfgtable;
-	bool use_doorbell;
+	u32 use_doorbell;
 	u32 board_id;
 	u16 command_register;
 
@@ -3215,20 +3364,15 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	 * using the doorbell register.
 	 */
 
-	/* Exclude 640x boards.  These are two pci devices in one slot
-	 * which share a battery backed cache module.  One controls the
-	 * cache, the other accesses the cache through the one that controls
-	 * it.  If we reset the one controlling the cache, the other will
-	 * likely not be happy.  Just forbid resetting this conjoined mess.
-	 * The 640x isn't really supported by hpsa anyway.
-	 */
 	rc = hpsa_lookup_board_id(pdev, &board_id);
-	if (rc < 0) {
+	if (rc < 0 || !ctlr_is_resettable(board_id)) {
 		dev_warn(&pdev->dev, "Not resetting device.\n");
 		return -ENODEV;
 	}
-	if (board_id == 0x409C0E11 || board_id == 0x409D0E11)
-		return -ENOTSUPP;
+
+	/* if controller is soft- but not hard resettable... */
+	if (!ctlr_is_hard_resettable(board_id))
+		return -ENOTSUPP; /* try soft reset later. */
 
 	/* Save the PCI command register */
 	pci_read_config_word(pdev, 4, &command_register);
@@ -3257,10 +3401,28 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 		rc = -ENOMEM;
 		goto unmap_vaddr;
 	}
+	rc = write_driver_ver_to_cfgtable(cfgtable);
+	if (rc)
+		goto unmap_vaddr;
 
-	/* If reset via doorbell register is supported, use that. */
+	/* If reset via doorbell register is supported, use that.
+	 * There are two such methods.  Favor the newest method.
+	 */
 	misc_fw_support = readl(&cfgtable->misc_fw_support);
-	use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
+	use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2;
+	if (use_doorbell) {
+		use_doorbell = DOORBELL_CTLR_RESET2;
+	} else {
+		use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
+		if (use_doorbell) {
+			dev_warn(&pdev->dev, "Controller claims that "
+				"'Bit 2 doorbell reset' is "
+				"supported, but not 'bit 5 doorbell reset'.  "
+				"Firmware update is recommended.\n");
+			rc = -ENOTSUPP; /* try soft reset */
+			goto unmap_cfgtable;
+		}
+	}
 
 	rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
 	if (rc)
@@ -3279,30 +3441,32 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	msleep(HPSA_POST_RESET_PAUSE_MSECS);
 
 	/* Wait for board to become not ready, then ready. */
-	dev_info(&pdev->dev, "Waiting for board to become ready.\n");
+	dev_info(&pdev->dev, "Waiting for board to reset.\n");
 	rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
-	if (rc)
+	if (rc) {
 		dev_warn(&pdev->dev,
-			"failed waiting for board to become not ready\n");
+			"failed waiting for board to reset."
+			" Will try soft reset.\n");
+		rc = -ENOTSUPP; /* Not expected, but try soft reset later */
+		goto unmap_cfgtable;
+	}
 	rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
 	if (rc) {
 		dev_warn(&pdev->dev,
-			"failed waiting for board to become ready\n");
+			"failed waiting for board to become ready "
+			"after hard reset\n");
 		goto unmap_cfgtable;
 	}
-	dev_info(&pdev->dev, "board ready.\n");
 
-	/* Controller should be in simple mode at this point.  If it's not,
-	 * It means we're on one of those controllers which doesn't support
-	 * the doorbell reset method and on which the PCI power management reset
-	 * method doesn't work (P800, for example.)
-	 * In those cases, don't try to proceed, as it generally doesn't work.
-	 */
-	active_transport = readl(&cfgtable->TransportActive);
-	if (active_transport & PERFORMANT_MODE) {
-		dev_warn(&pdev->dev, "Unable to successfully reset controller,"
-			" Ignoring controller.\n");
-		rc = -ENODEV;
+	rc = controller_reset_failed(vaddr);
+	if (rc < 0)
+		goto unmap_cfgtable;
+	if (rc) {
+		dev_warn(&pdev->dev, "Unable to successfully reset "
+			"controller. Will try soft reset.\n");
+		rc = -ENOTSUPP;
+	} else {
+		dev_info(&pdev->dev, "board ready after hard reset.\n");
 	}
 
 unmap_cfgtable:
@@ -3543,6 +3707,9 @@ static int __devinit hpsa_find_cfgtables(struct ctlr_info *h)
 		       cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
 	if (!h->cfgtable)
 		return -ENOMEM;
+	rc = write_driver_ver_to_cfgtable(h->cfgtable);
+	if (rc)
+		return rc;
 	/* Find performant mode table. */
 	trans_offset = readl(&h->cfgtable->TransMethodOffset);
 	h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
@@ -3777,11 +3944,12 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 	 * due to concerns about shared bbwc between 6402/6404 pair.
 	 */
 	if (rc == -ENOTSUPP)
-		return 0; /* just try to do the kdump anyhow. */
+		return rc; /* just try to do the kdump anyhow. */
 	if (rc)
 		return -ENODEV;
 
 	/* Now try to get the controller to respond to a no-op */
+	dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
 	for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
 		if (hpsa_noop(pdev) == 0)
 			break;
@@ -3792,18 +3960,133 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 	return 0;
 }
 
+static __devinit int hpsa_allocate_cmd_pool(struct ctlr_info *h)
+{
+	h->cmd_pool_bits = kzalloc(
+		DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG) *
+		sizeof(unsigned long), GFP_KERNEL);
+	h->cmd_pool = pci_alloc_consistent(h->pdev,
+		    h->nr_cmds * sizeof(*h->cmd_pool),
+		    &(h->cmd_pool_dhandle));
+	h->errinfo_pool = pci_alloc_consistent(h->pdev,
+		    h->nr_cmds * sizeof(*h->errinfo_pool),
+		    &(h->errinfo_pool_dhandle));
+	if ((h->cmd_pool_bits == NULL)
+	    || (h->cmd_pool == NULL)
+	    || (h->errinfo_pool == NULL)) {
+		dev_err(&h->pdev->dev, "out of memory in %s", __func__);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void hpsa_free_cmd_pool(struct ctlr_info *h)
+{
+	kfree(h->cmd_pool_bits);
+	if (h->cmd_pool)
+		pci_free_consistent(h->pdev,
+			    h->nr_cmds * sizeof(struct CommandList),
+			    h->cmd_pool, h->cmd_pool_dhandle);
+	if (h->errinfo_pool)
+		pci_free_consistent(h->pdev,
+			    h->nr_cmds * sizeof(struct ErrorInfo),
+			    h->errinfo_pool,
+			    h->errinfo_pool_dhandle);
+}
+
+static int hpsa_request_irq(struct ctlr_info *h,
+	irqreturn_t (*msixhandler)(int, void *),
+	irqreturn_t (*intxhandler)(int, void *))
+{
+	int rc;
+
+	if (h->msix_vector || h->msi_vector)
+		rc = request_irq(h->intr[h->intr_mode], msixhandler,
+				IRQF_DISABLED, h->devname, h);
+	else
+		rc = request_irq(h->intr[h->intr_mode], intxhandler,
+				IRQF_DISABLED, h->devname, h);
+	if (rc) {
+		dev_err(&h->pdev->dev, "unable to get irq %d for %s\n",
+		       h->intr[h->intr_mode], h->devname);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int __devinit hpsa_kdump_soft_reset(struct ctlr_info *h)
+{
+	if (hpsa_send_host_reset(h, RAID_CTLR_LUNID,
+		HPSA_RESET_TYPE_CONTROLLER)) {
+		dev_warn(&h->pdev->dev, "Resetting array controller failed.\n");
+		return -EIO;
+	}
+
+	dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
+	if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) {
+		dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");
+		return -1;
+	}
+
+	dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");
+	if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) {
+		dev_warn(&h->pdev->dev, "Board failed to become ready "
+			"after soft reset.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
+{
+	free_irq(h->intr[h->intr_mode], h);
+#ifdef CONFIG_PCI_MSI
+	if (h->msix_vector)
+		pci_disable_msix(h->pdev);
+	else if (h->msi_vector)
+		pci_disable_msi(h->pdev);
+#endif /* CONFIG_PCI_MSI */
+	hpsa_free_sg_chain_blocks(h);
+	hpsa_free_cmd_pool(h);
+	kfree(h->blockFetchTable);
+	pci_free_consistent(h->pdev, h->reply_pool_size,
+		h->reply_pool, h->reply_pool_dhandle);
+	if (h->vaddr)
+		iounmap(h->vaddr);
+	if (h->transtable)
+		iounmap(h->transtable);
+	if (h->cfgtable)
+		iounmap(h->cfgtable);
+	pci_release_regions(h->pdev);
+	kfree(h);
+}
+
 static int __devinit hpsa_init_one(struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
 {
 	int dac, rc;
 	struct ctlr_info *h;
+	int try_soft_reset = 0;
+	unsigned long flags;
 
 	if (number_of_controllers == 0)
 		printk(KERN_INFO DRIVER_NAME "\n");
 
 	rc = hpsa_init_reset_devices(pdev);
-	if (rc)
-		return rc;
+	if (rc) {
+		if (rc != -ENOTSUPP)
+			return rc;
+		/* If the reset fails in a particular way (it has no way to do
+		 * a proper hard reset, so returns -ENOTSUPP) we can try to do
+		 * a soft reset once we get the controller configured up to the
+		 * point that it can accept a command.
+		 */
+		try_soft_reset = 1;
+		rc = 0;
+	}
+
+reinit_after_soft_reset:
 
 	/* Command structures must be aligned on a 32-byte boundary because
 	 * the 5 lower bits of the address are used by the hardware. and by
@@ -3847,54 +4130,82 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 	/* make sure the board interrupts are off */
 	h->access.set_intr_mask(h, HPSA_INTR_OFF);
 
-	if (h->msix_vector || h->msi_vector)
-		rc = request_irq(h->intr[h->intr_mode], do_hpsa_intr_msi,
-				IRQF_DISABLED, h->devname, h);
-	else
-		rc = request_irq(h->intr[h->intr_mode], do_hpsa_intr_intx,
-				IRQF_DISABLED, h->devname, h);
-	if (rc) {
-		dev_err(&pdev->dev, "unable to get irq %d for %s\n",
-		       h->intr[h->intr_mode], h->devname);
+	if (hpsa_request_irq(h, do_hpsa_intr_msi, do_hpsa_intr_intx))
 		goto clean2;
-	}
-
 	dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
 	       h->devname, pdev->device,
 	       h->intr[h->intr_mode], dac ? "" : " not");
-
-	h->cmd_pool_bits =
-	    kmalloc(((h->nr_cmds + BITS_PER_LONG -
-		      1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
-	h->cmd_pool = pci_alloc_consistent(h->pdev,
-		    h->nr_cmds * sizeof(*h->cmd_pool),
-		    &(h->cmd_pool_dhandle));
-	h->errinfo_pool = pci_alloc_consistent(h->pdev,
-		    h->nr_cmds * sizeof(*h->errinfo_pool),
-		    &(h->errinfo_pool_dhandle));
-	if ((h->cmd_pool_bits == NULL)
-	    || (h->cmd_pool == NULL)
-	    || (h->errinfo_pool == NULL)) {
-		dev_err(&pdev->dev, "out of memory");
-		rc = -ENOMEM;
+	if (hpsa_allocate_cmd_pool(h))
 		goto clean4;
-	}
 	if (hpsa_allocate_sg_chain_blocks(h))
 		goto clean4;
 	init_waitqueue_head(&h->scan_wait_queue);
 	h->scan_finished = 1; /* no scan currently in progress */
 
 	pci_set_drvdata(pdev, h);
-	memset(h->cmd_pool_bits, 0,
-	       ((h->nr_cmds + BITS_PER_LONG -
-		 1) / BITS_PER_LONG) * sizeof(unsigned long));
+	h->ndevices = 0;
+	h->scsi_host = NULL;
+	spin_lock_init(&h->devlock);
+	hpsa_put_ctlr_into_performant_mode(h);
+
+	/* At this point, the controller is ready to take commands.
+	 * Now, if reset_devices and the hard reset didn't work, try
+	 * the soft reset and see if that works.
+	 */
+	if (try_soft_reset) {
+
+		/* This is kind of gross.  We may or may not get a completion
+		 * from the soft reset command, and if we do, then the value
+		 * from the fifo may or may not be valid.  So, we wait 10 secs
+		 * after the reset throwing away any completions we get during
+		 * that time.  Unregister the interrupt handler and register
+		 * fake ones to scoop up any residual completions.
+		 */
+		spin_lock_irqsave(&h->lock, flags);
+		h->access.set_intr_mask(h, HPSA_INTR_OFF);
+		spin_unlock_irqrestore(&h->lock, flags);
+		free_irq(h->intr[h->intr_mode], h);
+		rc = hpsa_request_irq(h, hpsa_msix_discard_completions,
+					hpsa_intx_discard_completions);
+		if (rc) {
+			dev_warn(&h->pdev->dev, "Failed to request_irq after "
+				"soft reset.\n");
+			goto clean4;
+		}
+
+		rc = hpsa_kdump_soft_reset(h);
+		if (rc)
+			/* Neither hard nor soft reset worked, we're hosed. */
+			goto clean4;
+
+		dev_info(&h->pdev->dev, "Board READY.\n");
+		dev_info(&h->pdev->dev,
+			"Waiting for stale completions to drain.\n");
+		h->access.set_intr_mask(h, HPSA_INTR_ON);
+		msleep(10000);
+		h->access.set_intr_mask(h, HPSA_INTR_OFF);
+
+		rc = controller_reset_failed(h->cfgtable);
+		if (rc)
+			dev_info(&h->pdev->dev,
+				"Soft reset appears to have failed.\n");
+
+		/* since the controller's reset, we have to go back and re-init
+		 * everything.  Easiest to just forget what we've done and do it
+		 * all over again.
+		 */
+		hpsa_undo_allocations_after_kdump_soft_reset(h);
+		try_soft_reset = 0;
+		if (rc)
+			/* don't go to clean4, we already unallocated */
+			return -ENODEV;
 
-	hpsa_scsi_setup(h);
+		goto reinit_after_soft_reset;
+	}
 
 	/* Turn the interrupts on so we can service requests */
 	h->access.set_intr_mask(h, HPSA_INTR_ON);
 
-	hpsa_put_ctlr_into_performant_mode(h);
 	hpsa_hba_inquiry(h);
 	hpsa_register_scsi(h);	/* hook ourselves into SCSI subsystem */
 	h->busy_initializing = 0;
@@ -3902,16 +4213,7 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 
 clean4:
 	hpsa_free_sg_chain_blocks(h);
-	kfree(h->cmd_pool_bits);
-	if (h->cmd_pool)
-		pci_free_consistent(h->pdev,
-			    h->nr_cmds * sizeof(struct CommandList),
-			    h->cmd_pool, h->cmd_pool_dhandle);
-	if (h->errinfo_pool)
-		pci_free_consistent(h->pdev,
-			    h->nr_cmds * sizeof(struct ErrorInfo),
-			    h->errinfo_pool,
-			    h->errinfo_pool_dhandle);
+	hpsa_free_cmd_pool(h);
 	free_irq(h->intr[h->intr_mode], h);
 clean2:
 clean1:
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 621a1530054..6d8dcd4dd06 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -127,10 +127,12 @@ struct ctlr_info {
 };
 #define HPSA_ABORT_MSG 0
 #define HPSA_DEVICE_RESET_MSG 1
-#define HPSA_BUS_RESET_MSG 2
-#define HPSA_HOST_RESET_MSG 3
+#define HPSA_RESET_TYPE_CONTROLLER 0x00
+#define HPSA_RESET_TYPE_BUS 0x01
+#define HPSA_RESET_TYPE_TARGET 0x03
+#define HPSA_RESET_TYPE_LUN 0x04
 #define HPSA_MSG_SEND_RETRY_LIMIT 10
-#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS 1000
+#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
 
 /* Maximum time in seconds driver will wait for command completions
  * when polling before giving up.
@@ -155,7 +157,7 @@ struct ctlr_info {
  * HPSA_BOARD_READY_ITERATIONS are derived from those.
  */
 #define HPSA_BOARD_READY_WAIT_SECS (120)
-#define HPSA_BOARD_NOT_READY_WAIT_SECS (10)
+#define HPSA_BOARD_NOT_READY_WAIT_SECS (100)
 #define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
 #define HPSA_BOARD_READY_POLL_INTERVAL \
 	((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
@@ -212,6 +214,7 @@ static void SA5_submit_command(struct ctlr_info *h,
 	dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr,
 		c->Header.Tag.lower);
 	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+	(void) readl(h->vaddr + SA5_REQUEST_PORT_OFFSET);
 	h->commands_outstanding++;
 	if (h->commands_outstanding > h->max_outstanding)
 		h->max_outstanding = h->commands_outstanding;
@@ -227,10 +230,12 @@ static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
 	if (val) { /* Turn interrupts on */
 		h->interrupts_enabled = 1;
 		writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 	} else { /* Turn them off */
 		h->interrupts_enabled = 0;
 		writel(SA5_INTR_OFF,
 			h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 	}
 }
 
@@ -239,10 +244,12 @@ static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
 	if (val) { /* turn on interrupts */
 		h->interrupts_enabled = 1;
 		writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 	} else {
 		h->interrupts_enabled = 0;
 		writel(SA5_PERF_INTR_OFF,
 			h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+		(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 	}
 }
 
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 18464900e76..55d741b019d 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -101,6 +101,7 @@
 #define CFGTBL_ChangeReq        0x00000001l
 #define CFGTBL_AccCmds          0x00000001l
 #define DOORBELL_CTLR_RESET	0x00000004l
+#define DOORBELL_CTLR_RESET2	0x00000020l
 
 #define CFGTBL_Trans_Simple     0x00000002l
 #define CFGTBL_Trans_Performant 0x00000004l
@@ -256,14 +257,6 @@ struct ErrorInfo {
 #define CMD_IOCTL_PEND  0x01
 #define CMD_SCSI	0x03
 
-/* This structure needs to be divisible by 32 for new
- * indexing method and performant mode.
- */
-#define PAD32 32
-#define PAD64DIFF 0
-#define USEEXTRA ((sizeof(void *) - 4)/4)
-#define PADSIZE (PAD32 + PAD64DIFF * USEEXTRA)
-
 #define DIRECT_LOOKUP_SHIFT 5
 #define DIRECT_LOOKUP_BIT 0x10
 #define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1))
@@ -345,6 +338,8 @@ struct CfgTable {
 	u8		reserved[0x78 - 0x58];
 	u32		misc_fw_support; /* offset 0x78 */
 #define			MISC_FW_DOORBELL_RESET (0x02)
+#define			MISC_FW_DOORBELL_RESET2 (0x010)
+	u8		driver_version[32];
 };
 
 #define NUM_BLOCKFETCH_ENTRIES 8
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 041958453e2..3d391dc3f11 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1849,8 +1849,7 @@ static void ibmvscsi_do_work(struct ibmvscsi_host_data *hostdata)
 		rc = ibmvscsi_ops->reset_crq_queue(&hostdata->queue, hostdata);
 		if (!rc)
 			rc = ibmvscsi_ops->send_crq(hostdata, 0xC001000000000000LL, 0);
-		if (!rc)
-			rc = vio_enable_interrupts(to_vio_dev(hostdata->dev));
+		vio_enable_interrupts(to_vio_dev(hostdata->dev));
 	} else if (hostdata->reenable_crq) {
 		smp_rmb();
 		action = "enable";
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 99aa0e5699b..26cd9d1d757 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -3,7 +3,7 @@
  * 
  * (The IMM is the embedded controller in the ZIP Plus drive.)
  * 
- * My unoffical company acronym list is 21 pages long:
+ * My unofficial company acronym list is 21 pages long:
  *      FLA:    Four letter acronym with built in facility for
  *              future expansion to five letters.
  */
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index 6568aab745a..92109b12639 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -343,7 +343,7 @@ static int in2000_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 	instance = cmd->device->host;
 	hostdata = (struct IN2000_hostdata *) instance->hostdata;
 
-	DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x-%ld(", cmd->cmnd[0], cmd->serial_number))
+	DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x(", cmd->cmnd[0]))
 
 /* Set up a few fields in the Scsi_Cmnd structure for our own use:
  *  - host_scribble is the pointer to the next cmd in the input queue
@@ -427,7 +427,7 @@ static int in2000_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 
 	in2000_execute(cmd->device->host);
 
-	DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
+	DB(DB_QUEUE_COMMAND, printk(")Q "))
 	    return 0;
 }
 
@@ -705,7 +705,7 @@ static void in2000_execute(struct Scsi_Host *instance)
 	 * to search the input_Q again...
 	 */
 
-	DB(DB_EXECUTE, printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
+	DB(DB_EXECUTE, printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : ""))
 
 }
 
@@ -1149,7 +1149,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
 	case CSR_XFER_DONE | PHS_COMMAND:
 	case CSR_UNEXP | PHS_COMMAND:
 	case CSR_SRV_REQ | PHS_COMMAND:
-		DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
+		DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0]))
 		    transfer_pio(cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR, hostdata);
 		hostdata->state = S_CONNECTED;
 		break;
@@ -1191,7 +1191,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
 		switch (msg) {
 
 		case COMMAND_COMPLETE:
-			DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
+			DB(DB_INTR, printk("CCMP"))
 			    write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK);
 			hostdata->state = S_PRE_CMP_DISC;
 			break;
@@ -1329,7 +1329,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
 
 		write_3393(hostdata, WD_SOURCE_ID, SRCID_ER);
 		if (phs == 0x60) {
-			DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
+			DB(DB_INTR, printk("SX-DONE"))
 			    cmd->SCp.Message = COMMAND_COMPLETE;
 			lun = read_3393(hostdata, WD_TARGET_LUN);
 			DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
@@ -1350,7 +1350,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
 
 			in2000_execute(instance);
 		} else {
-			printk("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs, cmd->serial_number);
+			printk("%02x:%02x:%02x: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs);
 		}
 		break;
 
@@ -1417,7 +1417,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
 			spin_unlock_irqrestore(instance->host_lock, flags);
 			return IRQ_HANDLED;
 		}
-		DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
+		DB(DB_INTR, printk("UNEXP_DISC"))
 		    hostdata->connected = NULL;
 		hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
 		hostdata->state = S_UNCONNECTED;
@@ -1442,7 +1442,7 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
  */
 
 		write_3393(hostdata, WD_SOURCE_ID, SRCID_ER);
-		DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
+		DB(DB_INTR, printk("DISC"))
 		    if (cmd == NULL) {
 			printk(" - Already disconnected! ");
 			hostdata->state = S_UNCONNECTED;
@@ -1575,7 +1575,6 @@ static irqreturn_t in2000_intr(int irqnum, void *dev_id)
 		} else
 			hostdata->state = S_CONNECTED;
 
-		DB(DB_INTR, printk("-%ld", cmd->serial_number))
 		    break;
 
 	default:
@@ -1704,7 +1703,7 @@ static int __in2000_abort(Scsi_Cmnd * cmd)
 				prev->host_scribble = cmd->host_scribble;
 			cmd->host_scribble = NULL;
 			cmd->result = DID_ABORT << 16;
-			printk(KERN_WARNING "scsi%d: Abort - removing command %ld from input_Q. ", instance->host_no, cmd->serial_number);
+			printk(KERN_WARNING "scsi%d: Abort - removing command from input_Q. ", instance->host_no);
 			cmd->scsi_done(cmd);
 			return SUCCESS;
 		}
@@ -1725,7 +1724,7 @@ static int __in2000_abort(Scsi_Cmnd * cmd)
 
 	if (hostdata->connected == cmd) {
 
-		printk(KERN_WARNING "scsi%d: Aborting connected command %ld - ", instance->host_no, cmd->serial_number);
+		printk(KERN_WARNING "scsi%d: Aborting connected command - ", instance->host_no);
 
 		printk("sending wd33c93 ABORT command - ");
 		write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED);
@@ -2270,7 +2269,7 @@ static int in2000_proc_info(struct Scsi_Host *instance, char *buf, char **start,
 		strcat(bp, "\nconnected:     ");
 		if (hd->connected) {
 			cmd = (Scsi_Cmnd *) hd->connected;
-			sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+			sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 			strcat(bp, tbuf);
 		}
 	}
@@ -2278,7 +2277,7 @@ static int in2000_proc_info(struct Scsi_Host *instance, char *buf, char **start,
 		strcat(bp, "\ninput_Q:       ");
 		cmd = (Scsi_Cmnd *) hd->input_Q;
 		while (cmd) {
-			sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+			sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 			strcat(bp, tbuf);
 			cmd = (Scsi_Cmnd *) cmd->host_scribble;
 		}
@@ -2287,7 +2286,7 @@ static int in2000_proc_info(struct Scsi_Host *instance, char *buf, char **start,
 		strcat(bp, "\ndisconnected_Q:");
 		cmd = (Scsi_Cmnd *) hd->disconnected_Q;
 		while (cmd) {
-			sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+			sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 			strcat(bp, tbuf);
 			cmd = (Scsi_Cmnd *) cmd->host_scribble;
 		}
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 9627d062e16..dd741bcd6cc 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -242,7 +242,7 @@ static u8 i91udftNvRam[64] =
 
 static u8 initio_rate_tbl[8] =	/* fast 20      */
 {
-				/* nanosecond devide by 4 */
+				/* nanosecond divide by 4 */
 	12,			/* 50ns,  20M   */
 	18,			/* 75ns,  13.3M */
 	25,			/* 100ns, 10M   */
@@ -1917,7 +1917,7 @@ static int int_initio_scsi_rst(struct initio_host * host)
 }
 
 /**
- *	int_initio_scsi_resel	-	Reselection occured
+ *	int_initio_scsi_resel	-	Reselection occurred
  *	@host: InitIO host adapter
  *
  *	A SCSI reselection event has been signalled and the interrupt
diff --git a/drivers/scsi/initio.h b/drivers/scsi/initio.h
index e58af9e9550..219b901bdc2 100644
--- a/drivers/scsi/initio.h
+++ b/drivers/scsi/initio.h
@@ -116,7 +116,7 @@ typedef struct {
 #define TUL_SBusId      0x89	/* 09 R   SCSI BUS ID                   */
 #define TUL_STimeOut    0x8A	/* 0A W   Sel/Resel Time Out Register   */
 #define TUL_SIdent      0x8A	/* 0A R   Identify Message Register     */
-#define TUL_SAvail      0x8A	/* 0A R   Availiable Counter Register   */
+#define TUL_SAvail      0x8A	/* 0A R   Available Counter Register   */
 #define TUL_SData       0x8B	/* 0B R/W SCSI data in/out              */
 #define TUL_SFifo       0x8C	/* 0C R/W FIFO                          */
 #define TUL_SSignal     0x90	/* 10 R/W SCSI signal in/out            */
@@ -389,7 +389,7 @@ struct scsi_ctrl_blk {
 /* Bit Definition for status */
 #define SCB_RENT        0x01
 #define SCB_PEND        0x02
-#define SCB_CONTIG      0x04	/* Contigent Allegiance */
+#define SCB_CONTIG      0x04	/* Contingent Allegiance */
 #define SCB_SELECT      0x08
 #define SCB_BUSY        0x10
 #define SCB_DONE        0x20
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 0621238fac4..12868ca4611 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -60,6 +60,7 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
@@ -2717,13 +2718,18 @@ static int ipr_sdt_copy(struct ipr_ioa_cfg *ioa_cfg,
 			unsigned long pci_address, u32 length)
 {
 	int bytes_copied = 0;
-	int cur_len, rc, rem_len, rem_page_len;
+	int cur_len, rc, rem_len, rem_page_len, max_dump_size;
 	__be32 *page;
 	unsigned long lock_flags = 0;
 	struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump;
 
+	if (ioa_cfg->sis64)
+		max_dump_size = IPR_FMT3_MAX_IOA_DUMP_SIZE;
+	else
+		max_dump_size = IPR_FMT2_MAX_IOA_DUMP_SIZE;
+
 	while (bytes_copied < length &&
-	       (ioa_dump->hdr.len + bytes_copied) < IPR_MAX_IOA_DUMP_SIZE) {
+	       (ioa_dump->hdr.len + bytes_copied) < max_dump_size) {
 		if (ioa_dump->page_offset >= PAGE_SIZE ||
 		    ioa_dump->page_offset == 0) {
 			page = (__be32 *)__get_free_page(GFP_ATOMIC);
@@ -2885,8 +2891,8 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 	unsigned long lock_flags = 0;
 	struct ipr_driver_dump *driver_dump = &dump->driver_dump;
 	struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump;
-	u32 num_entries, start_off, end_off;
-	u32 bytes_to_copy, bytes_copied, rc;
+	u32 num_entries, max_num_entries, start_off, end_off;
+	u32 max_dump_size, bytes_to_copy, bytes_copied, rc;
 	struct ipr_sdt *sdt;
 	int valid = 1;
 	int i;
@@ -2947,8 +2953,18 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 	 on entries in this table */
 	sdt = &ioa_dump->sdt;
 
+	if (ioa_cfg->sis64) {
+		max_num_entries = IPR_FMT3_NUM_SDT_ENTRIES;
+		max_dump_size = IPR_FMT3_MAX_IOA_DUMP_SIZE;
+	} else {
+		max_num_entries = IPR_FMT2_NUM_SDT_ENTRIES;
+		max_dump_size = IPR_FMT2_MAX_IOA_DUMP_SIZE;
+	}
+
+	bytes_to_copy = offsetof(struct ipr_sdt, entry) +
+			(max_num_entries * sizeof(struct ipr_sdt_entry));
 	rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt,
-					sizeof(struct ipr_sdt) / sizeof(__be32));
+					bytes_to_copy / sizeof(__be32));
 
 	/* Smart Dump table is ready to use and the first entry is valid */
 	if (rc || ((be32_to_cpu(sdt->hdr.state) != IPR_FMT3_SDT_READY_TO_USE) &&
@@ -2964,13 +2980,20 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 
 	num_entries = be32_to_cpu(sdt->hdr.num_entries_used);
 
-	if (num_entries > IPR_NUM_SDT_ENTRIES)
-		num_entries = IPR_NUM_SDT_ENTRIES;
+	if (num_entries > max_num_entries)
+		num_entries = max_num_entries;
+
+	/* Update dump length to the actual data to be copied */
+	dump->driver_dump.hdr.len += sizeof(struct ipr_sdt_header);
+	if (ioa_cfg->sis64)
+		dump->driver_dump.hdr.len += num_entries * sizeof(struct ipr_sdt_entry);
+	else
+		dump->driver_dump.hdr.len += max_num_entries * sizeof(struct ipr_sdt_entry);
 
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 
 	for (i = 0; i < num_entries; i++) {
-		if (ioa_dump->hdr.len > IPR_MAX_IOA_DUMP_SIZE) {
+		if (ioa_dump->hdr.len > max_dump_size) {
 			driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
 			break;
 		}
@@ -2989,7 +3012,7 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 					valid = 0;
 			}
 			if (valid) {
-				if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) {
+				if (bytes_to_copy > max_dump_size) {
 					sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY;
 					continue;
 				}
@@ -3044,6 +3067,7 @@ static void ipr_release_dump(struct kref *kref)
 	for (i = 0; i < dump->ioa_dump.next_page_index; i++)
 		free_page((unsigned long) dump->ioa_dump.ioa_data[i]);
 
+	vfree(dump->ioa_dump.ioa_data);
 	kfree(dump);
 	LEAVE;
 }
@@ -3835,7 +3859,7 @@ static ssize_t ipr_read_dump(struct file *filp, struct kobject *kobj,
 	struct ipr_dump *dump;
 	unsigned long lock_flags = 0;
 	char *src;
-	int len;
+	int len, sdt_end;
 	size_t rc = count;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -3875,9 +3899,17 @@ static ssize_t ipr_read_dump(struct file *filp, struct kobject *kobj,
 
 	off -= sizeof(dump->driver_dump);
 
-	if (count && off < offsetof(struct ipr_ioa_dump, ioa_data)) {
-		if (off + count > offsetof(struct ipr_ioa_dump, ioa_data))
-			len = offsetof(struct ipr_ioa_dump, ioa_data) - off;
+	if (ioa_cfg->sis64)
+		sdt_end = offsetof(struct ipr_ioa_dump, sdt.entry) +
+			  (be32_to_cpu(dump->ioa_dump.sdt.hdr.num_entries_used) *
+			   sizeof(struct ipr_sdt_entry));
+	else
+		sdt_end = offsetof(struct ipr_ioa_dump, sdt.entry) +
+			  (IPR_FMT2_NUM_SDT_ENTRIES * sizeof(struct ipr_sdt_entry));
+
+	if (count && off < sdt_end) {
+		if (off + count > sdt_end)
+			len = sdt_end - off;
 		else
 			len = count;
 		src = (u8 *)&dump->ioa_dump + off;
@@ -3887,7 +3919,7 @@ static ssize_t ipr_read_dump(struct file *filp, struct kobject *kobj,
 		count -= len;
 	}
 
-	off -= offsetof(struct ipr_ioa_dump, ioa_data);
+	off -= sdt_end;
 
 	while (count) {
 		if ((off & PAGE_MASK) != ((off + count) & PAGE_MASK))
@@ -3916,6 +3948,7 @@ static ssize_t ipr_read_dump(struct file *filp, struct kobject *kobj,
 static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg)
 {
 	struct ipr_dump *dump;
+	__be32 **ioa_data;
 	unsigned long lock_flags = 0;
 
 	dump = kzalloc(sizeof(struct ipr_dump), GFP_KERNEL);
@@ -3925,6 +3958,19 @@ static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg)
 		return -ENOMEM;
 	}
 
+	if (ioa_cfg->sis64)
+		ioa_data = vmalloc(IPR_FMT3_MAX_NUM_DUMP_PAGES * sizeof(__be32 *));
+	else
+		ioa_data = vmalloc(IPR_FMT2_MAX_NUM_DUMP_PAGES * sizeof(__be32 *));
+
+	if (!ioa_data) {
+		ipr_err("Dump memory allocation failed\n");
+		kfree(dump);
+		return -ENOMEM;
+	}
+
+	dump->ioa_dump.ioa_data = ioa_data;
+
 	kref_init(&dump->kref);
 	dump->ioa_cfg = ioa_cfg;
 
@@ -3932,6 +3978,7 @@ static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg)
 
 	if (INACTIVE != ioa_cfg->sdt_state) {
 		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+		vfree(dump->ioa_dump.ioa_data);
 		kfree(dump);
 		return 0;
 	}
@@ -4953,9 +5000,35 @@ static int ipr_eh_abort(struct scsi_cmnd * scsi_cmd)
  * 	IRQ_NONE / IRQ_HANDLED
  **/
 static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
-					      volatile u32 int_reg)
+					      u32 int_reg)
 {
 	irqreturn_t rc = IRQ_HANDLED;
+	u32 int_mask_reg;
+
+	int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
+	int_reg &= ~int_mask_reg;
+
+	/* If an interrupt on the adapter did not occur, ignore it.
+	 * Or in the case of SIS 64, check for a stage change interrupt.
+	 */
+	if ((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0) {
+		if (ioa_cfg->sis64) {
+			int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+			int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+			if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
+
+				/* clear stage change */
+				writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
+				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+				list_del(&ioa_cfg->reset_cmd->queue);
+				del_timer(&ioa_cfg->reset_cmd->timer);
+				ipr_reset_ioa_job(ioa_cfg->reset_cmd);
+				return IRQ_HANDLED;
+			}
+		}
+
+		return IRQ_NONE;
+	}
 
 	if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
 		/* Mask the interrupt */
@@ -4968,6 +5041,13 @@ static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
 		list_del(&ioa_cfg->reset_cmd->queue);
 		del_timer(&ioa_cfg->reset_cmd->timer);
 		ipr_reset_ioa_job(ioa_cfg->reset_cmd);
+	} else if ((int_reg & IPR_PCII_HRRQ_UPDATED) == int_reg) {
+		if (ipr_debug && printk_ratelimit())
+			dev_err(&ioa_cfg->pdev->dev,
+				"Spurious interrupt detected. 0x%08X\n", int_reg);
+		writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
+		int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
+		return IRQ_NONE;
 	} else {
 		if (int_reg & IPR_PCII_IOA_UNIT_CHECKED)
 			ioa_cfg->ioa_unit_checked = 1;
@@ -5016,10 +5096,11 @@ static irqreturn_t ipr_isr(int irq, void *devp)
 {
 	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
 	unsigned long lock_flags = 0;
-	volatile u32 int_reg, int_mask_reg;
+	u32 int_reg = 0;
 	u32 ioasc;
 	u16 cmd_index;
 	int num_hrrq = 0;
+	int irq_none = 0;
 	struct ipr_cmnd *ipr_cmd;
 	irqreturn_t rc = IRQ_NONE;
 
@@ -5031,33 +5112,6 @@ static irqreturn_t ipr_isr(int irq, void *devp)
 		return IRQ_NONE;
 	}
 
-	int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32);
-	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
-
-	/* If an interrupt on the adapter did not occur, ignore it.
-	 * Or in the case of SIS 64, check for a stage change interrupt.
-	 */
-	if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
-		if (ioa_cfg->sis64) {
-			int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
-			int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
-			if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) {
-
-				/* clear stage change */
-				writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg);
-				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
-				list_del(&ioa_cfg->reset_cmd->queue);
-				del_timer(&ioa_cfg->reset_cmd->timer);
-				ipr_reset_ioa_job(ioa_cfg->reset_cmd);
-				spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
-				return IRQ_HANDLED;
-			}
-		}
-
-		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
-		return IRQ_NONE;
-	}
-
 	while (1) {
 		ipr_cmd = NULL;
 
@@ -5097,7 +5151,7 @@ static irqreturn_t ipr_isr(int irq, void *devp)
 			/* Clear the PCI interrupt */
 			do {
 				writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32);
-				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32) & ~int_mask_reg;
+				int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
 			} while (int_reg & IPR_PCII_HRRQ_UPDATED &&
 					num_hrrq++ < IPR_MAX_HRRQ_RETRIES);
 
@@ -5107,6 +5161,9 @@ static irqreturn_t ipr_isr(int irq, void *devp)
 				return IRQ_HANDLED;
 			}
 
+		} else if (rc == IRQ_NONE && irq_none == 0) {
+			int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
+			irq_none++;
 		} else
 			break;
 	}
@@ -5143,7 +5200,8 @@ static int ipr_build_ioadl64(struct ipr_ioa_cfg *ioa_cfg,
 
 	nseg = scsi_dma_map(scsi_cmd);
 	if (nseg < 0) {
-		dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
+		if (printk_ratelimit())
+			dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
 		return -1;
 	}
 
@@ -5773,7 +5831,8 @@ static int ipr_queuecommand_lck(struct scsi_cmnd *scsi_cmd,
 		}
 
 		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
-		ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
+		if (ipr_is_gscsi(res))
+			ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
 		ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
 		ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd);
 	}
@@ -7516,7 +7575,7 @@ static int ipr_reset_get_unit_check_job(struct ipr_cmnd *ipr_cmd)
 static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
-	volatile u32 int_reg;
+	u32 int_reg;
 
 	ENTER;
 	ioa_cfg->pdev->state_saved = true;
@@ -7555,7 +7614,10 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
 		ipr_cmd->job_step = ipr_reset_enable_ioa;
 
 		if (GET_DUMP == ioa_cfg->sdt_state) {
-			ipr_reset_start_timer(ipr_cmd, IPR_DUMP_TIMEOUT);
+			if (ioa_cfg->sis64)
+				ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
+			else
+				ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT);
 			ipr_cmd->job_step = ipr_reset_wait_for_dump;
 			schedule_work(&ioa_cfg->work_q);
 			return IPR_RC_JOB_RETURN;
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 13f425fb885..f93f8637c5a 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -38,8 +38,8 @@
 /*
  * Literals
  */
-#define IPR_DRIVER_VERSION "2.5.1"
-#define IPR_DRIVER_DATE "(August 10, 2010)"
+#define IPR_DRIVER_VERSION "2.5.2"
+#define IPR_DRIVER_DATE "(April 27, 2011)"
 
 /*
  * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -217,7 +217,8 @@
 #define IPR_CHECK_FOR_RESET_TIMEOUT		(HZ / 10)
 #define IPR_WAIT_FOR_BIST_TIMEOUT		(2 * HZ)
 #define IPR_PCI_RESET_TIMEOUT			(HZ / 2)
-#define IPR_DUMP_TIMEOUT			(15 * HZ)
+#define IPR_SIS32_DUMP_TIMEOUT			(15 * HZ)
+#define IPR_SIS64_DUMP_TIMEOUT			(40 * HZ)
 #define IPR_DUMP_DELAY_SECONDS			4
 #define IPR_DUMP_DELAY_TIMEOUT			(IPR_DUMP_DELAY_SECONDS * HZ)
 
@@ -285,9 +286,12 @@ IPR_PCII_NO_HOST_RRQ | IPR_PCII_IOARRIN_LOST | IPR_PCII_MMIO_ERROR)
 /*
  * Dump literals
  */
-#define IPR_MAX_IOA_DUMP_SIZE				(4 * 1024 * 1024)
-#define IPR_NUM_SDT_ENTRIES				511
-#define IPR_MAX_NUM_DUMP_PAGES	((IPR_MAX_IOA_DUMP_SIZE / PAGE_SIZE) + 1)
+#define IPR_FMT2_MAX_IOA_DUMP_SIZE			(4 * 1024 * 1024)
+#define IPR_FMT3_MAX_IOA_DUMP_SIZE			(32 * 1024 * 1024)
+#define IPR_FMT2_NUM_SDT_ENTRIES			511
+#define IPR_FMT3_NUM_SDT_ENTRIES			0xFFF
+#define IPR_FMT2_MAX_NUM_DUMP_PAGES	((IPR_FMT2_MAX_IOA_DUMP_SIZE / PAGE_SIZE) + 1)
+#define IPR_FMT3_MAX_NUM_DUMP_PAGES	((IPR_FMT3_MAX_IOA_DUMP_SIZE / PAGE_SIZE) + 1)
 
 /*
  * Misc literals
@@ -474,7 +478,7 @@ struct ipr_cmd_pkt {
 
 	u8 flags_lo;
 #define IPR_FLAGS_LO_ALIGNED_BFR		0x20
-#define IPR_FLAGS_LO_DELAY_AFTER_RST	0x10
+#define IPR_FLAGS_LO_DELAY_AFTER_RST		0x10
 #define IPR_FLAGS_LO_UNTAGGED_TASK		0x00
 #define IPR_FLAGS_LO_SIMPLE_TASK		0x02
 #define IPR_FLAGS_LO_ORDERED_TASK		0x04
@@ -1164,7 +1168,7 @@ struct ipr_sdt_header {
 
 struct ipr_sdt {
 	struct ipr_sdt_header hdr;
-	struct ipr_sdt_entry entry[IPR_NUM_SDT_ENTRIES];
+	struct ipr_sdt_entry entry[IPR_FMT3_NUM_SDT_ENTRIES];
 }__attribute__((packed, aligned (4)));
 
 struct ipr_uc_sdt {
@@ -1608,7 +1612,7 @@ struct ipr_driver_dump {
 struct ipr_ioa_dump {
 	struct ipr_dump_entry_header hdr;
 	struct ipr_sdt sdt;
-	__be32 *ioa_data[IPR_MAX_NUM_DUMP_PAGES];
+	__be32 **ioa_data;
 	u32 reserved;
 	u32 next_page_index;
 	u32 page_offset;
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index b2511acd39b..218f71a8726 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -137,7 +137,7 @@
 /*          - Fix path/name for scsi_hosts.h include for 2.6 kernels         */
 /*          - Fix sort order of 7k                                           */
 /*          - Remove 3 unused "inline" functions                             */
-/* 7.12.xx  - Use STATIC functions whereever possible                        */
+/* 7.12.xx  - Use STATIC functions wherever possible                        */
 /*          - Clean up deprecated MODULE_PARM calls                          */
 /* 7.12.05  - Remove Version Matching per IBM request                        */
 /*****************************************************************************/
@@ -1665,7 +1665,7 @@ ips_flash_copperhead(ips_ha_t * ha, ips_passthru_t * pt, ips_scb_t * scb)
 	int datasize;
 
 	/* Trombone is the only copperhead that can do packet flash, but only
-	 * for firmware. No one said it had to make sence. */
+	 * for firmware. No one said it had to make sense. */
 	if (IPS_IS_TROMBONE(ha) && pt->CoppCP.cmd.flashfw.type == IPS_FW_IMAGE) {
 		if (ips_usrcmd(ha, pt, scb))
 			return IPS_SUCCESS;
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index 4e49fbcfe8a..f2df0593332 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -1193,7 +1193,7 @@ typedef struct {
 #define IPS_VER_SEBRING "7.12.02"
 #define IPS_VER_KEYWEST "7.12.02"
 
-/* Compatability IDs for various adapters */
+/* Compatibility IDs for various adapters */
 #define IPS_COMPAT_UNKNOWN ""
 #define IPS_COMPAT_CURRENT "KW710"
 #define IPS_COMPAT_SERVERAID1 "2.25.01"
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index a860452a8f7..3df985305f6 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -295,7 +295,7 @@ static int iscsi_sw_tcp_xmit(struct iscsi_conn *conn)
 		rc = iscsi_sw_tcp_xmit_segment(tcp_conn, segment);
 		/*
 		 * We may not have been able to send data because the conn
-		 * is getting stopped. libiscsi will know so propogate err
+		 * is getting stopped. libiscsi will know so propagate err
 		 * for it to do the right thing.
 		 */
 		if (rc == -EAGAIN)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 28231badd9e..77035a746f6 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1042,7 +1042,7 @@ static void fc_exch_set_addr(struct fc_exch *ep,
 }
 
 /**
- * fc_seq_els_rsp_send() - Send an ELS response using infomation from
+ * fc_seq_els_rsp_send() - Send an ELS response using information from
  *			   the existing sequence/exchange.
  * @fp:	      The received frame
  * @els_cmd:  The ELS command to be sent
@@ -1153,7 +1153,7 @@ static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp)
  * fc_exch_send_ba_rjt() - Send BLS Reject
  * @rx_fp:  The frame being rejected
  * @reason: The reason the frame is being rejected
- * @explan: The explaination for the rejection
+ * @explan: The explanation for the rejection
  *
  * This is for rejecting BA_ABTS only.
  */
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index b1b03af158b..2a3a4720a77 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -57,9 +57,6 @@ static struct kmem_cache *scsi_pkt_cachep;
 #define FC_SRB_READ		(1 << 1)
 #define FC_SRB_WRITE		(1 << 0)
 
-/* constant added to e_d_tov timeout to get rec_tov value */
-#define REC_TOV_CONST		1
-
 /*
  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
  */
@@ -248,7 +245,7 @@ static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
 /**
  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
  * @fsp:   The FCP packet to start a timer for
- * @delay: The timeout period for the timer
+ * @delay: The timeout period in jiffies
  */
 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
 {
@@ -335,22 +332,23 @@ static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
 /**
  * fc_fcp_can_queue_ramp_up() - increases can_queue
  * @lport: lport to ramp up can_queue
- *
- * Locking notes: Called with Scsi_Host lock held
  */
 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
 {
 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
+	unsigned long flags;
 	int can_queue;
 
+	spin_lock_irqsave(lport->host->host_lock, flags);
+
 	if (si->last_can_queue_ramp_up_time &&
 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
 			 FC_CAN_QUEUE_PERIOD)))
-		return;
+		goto unlock;
 
 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
 			FC_CAN_QUEUE_PERIOD))
-		return;
+		goto unlock;
 
 	si->last_can_queue_ramp_up_time = jiffies;
 
@@ -362,6 +360,9 @@ static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
 	lport->host->can_queue = can_queue;
 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
 		     "can_queue to %d.\n", can_queue);
+
+unlock:
+	spin_unlock_irqrestore(lport->host->host_lock, flags);
 }
 
 /**
@@ -373,18 +374,19 @@ static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
  * commands complete or timeout, then try again with a reduced
  * can_queue. Eventually we will hit the point where we run
  * on all reserved structs.
- *
- * Locking notes: Called with Scsi_Host lock held
  */
 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
 {
 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
+	unsigned long flags;
 	int can_queue;
 
+	spin_lock_irqsave(lport->host->host_lock, flags);
+
 	if (si->last_can_queue_ramp_down_time &&
 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
 			 FC_CAN_QUEUE_PERIOD)))
-		return;
+		goto unlock;
 
 	si->last_can_queue_ramp_down_time = jiffies;
 
@@ -395,6 +397,9 @@ static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
 	lport->host->can_queue = can_queue;
 	shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
 		     "Reducing can_queue to %d.\n", can_queue);
+
+unlock:
+	spin_unlock_irqrestore(lport->host->host_lock, flags);
 }
 
 /*
@@ -409,16 +414,13 @@ static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
 						  size_t len)
 {
 	struct fc_frame *fp;
-	unsigned long flags;
 
 	fp = fc_frame_alloc(lport, len);
 	if (likely(fp))
 		return fp;
 
 	/* error case */
-	spin_lock_irqsave(lport->host->host_lock, flags);
 	fc_fcp_can_queue_ramp_down(lport);
-	spin_unlock_irqrestore(lport->host->host_lock, flags);
 	return NULL;
 }
 
@@ -870,7 +872,7 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
 				/*
 				 * The cmnd->underflow is the minimum number of
-				 * bytes that must be transfered for this
+				 * bytes that must be transferred for this
 				 * command.  Provided a sense condition is not
 				 * present, make sure the actual amount
 				 * transferred is at least the underflow value
@@ -1093,16 +1095,14 @@ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
 /**
  * get_fsp_rec_tov() - Helper function to get REC_TOV
  * @fsp: the FCP packet
+ *
+ * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
  */
 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
 {
-	struct fc_rport *rport;
-	struct fc_rport_libfc_priv *rpriv;
-
-	rport = fsp->rport;
-	rpriv = rport->dd_data;
+	struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
 
-	return rpriv->e_d_tov + REC_TOV_CONST;
+	return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
 }
 
 /**
@@ -1122,7 +1122,6 @@ static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
 	struct fc_rport_libfc_priv *rpriv;
 	const size_t len = sizeof(fsp->cdb_cmd);
 	int rc = 0;
-	unsigned int rec_tov;
 
 	if (fc_fcp_lock_pkt(fsp))
 		return 0;
@@ -1153,12 +1152,9 @@ static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
 	fsp->seq_ptr = seq;
 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
 
-	rec_tov = get_fsp_rec_tov(fsp);
-
 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
-
 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
-		fc_fcp_timer_set(fsp, rec_tov);
+		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
 
 unlock:
 	fc_fcp_unlock_pkt(fsp);
@@ -1235,16 +1231,14 @@ static void fc_lun_reset_send(unsigned long data)
 {
 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
 	struct fc_lport *lport = fsp->lp;
-	unsigned int rec_tov;
 
 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
 			return;
 		if (fc_fcp_lock_pkt(fsp))
 			return;
-		rec_tov = get_fsp_rec_tov(fsp);
 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
-		fc_fcp_timer_set(fsp, rec_tov);
+		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
 		fc_fcp_unlock_pkt(fsp);
 	}
 }
@@ -1306,7 +1300,7 @@ static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
 }
 
 /**
- * fc_tm_done() - Task Managment response handler
+ * fc_tm_done() - Task Management response handler
  * @seq: The sequence that the response is on
  * @fp:	 The response frame
  * @arg: The FCP packet the response is for
@@ -1536,12 +1530,11 @@ static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 			}
 			fc_fcp_srr(fsp, r_ctl, offset);
 		} else if (e_stat & ESB_ST_SEQ_INIT) {
-			unsigned int rec_tov = get_fsp_rec_tov(fsp);
 			/*
 			 * The remote port has the initiative, so just
 			 * keep waiting for it to complete.
 			 */
-			fc_fcp_timer_set(fsp, rec_tov);
+			fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
 		} else {
 
 			/*
@@ -1705,7 +1698,6 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 {
 	struct fc_fcp_pkt *fsp = arg;
 	struct fc_frame_header *fh;
-	unsigned int rec_tov;
 
 	if (IS_ERR(fp)) {
 		fc_fcp_srr_error(fsp, fp);
@@ -1732,8 +1724,7 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 	switch (fc_frame_payload_op(fp)) {
 	case ELS_LS_ACC:
 		fsp->recov_retry = 0;
-		rec_tov = get_fsp_rec_tov(fsp);
-		fc_fcp_timer_set(fsp, rec_tov);
+		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
 		break;
 	case ELS_LS_RJT:
 	default:
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 8c08b210001..389ab80aef0 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -52,7 +52,7 @@
  * while making the callback. To ensure that the rport is not free'd while
  * processing the callback the rport callbacks are serialized through a
  * single-threaded workqueue. An rport would never be free'd while in a
- * callback handler becuase no other rport work in this queue can be executed
+ * callback handler because no other rport work in this queue can be executed
  * at the same time.
  *
  * When discovery succeeds or fails a callback is made to the lport as
@@ -163,7 +163,7 @@ static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp)
  * fc_lport_rport_callback() - Event handler for rport events
  * @lport: The lport which is receiving the event
  * @rdata: private remote port data
- * @event: The event that occured
+ * @event: The event that occurred
  *
  * Locking Note: The rport lock should not be held when calling
  *		 this function.
@@ -379,7 +379,7 @@ static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type)
 
 /**
  * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report.
- * @lport: Fibre Channel local port recieving the RLIR
+ * @lport: Fibre Channel local port receiving the RLIR
  * @fp:	   The RLIR request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -396,7 +396,7 @@ static void fc_lport_recv_rlir_req(struct fc_lport *lport, struct fc_frame *fp)
 
 /**
  * fc_lport_recv_echo_req() - Handle received ECHO request
- * @lport: The local port recieving the ECHO
+ * @lport: The local port receiving the ECHO
  * @fp:	   ECHO request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -432,7 +432,7 @@ static void fc_lport_recv_echo_req(struct fc_lport *lport,
 
 /**
  * fc_lport_recv_rnid_req() - Handle received Request Node ID data request
- * @lport: The local port recieving the RNID
+ * @lport: The local port receiving the RNID
  * @fp:	   The RNID request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -491,7 +491,7 @@ static void fc_lport_recv_rnid_req(struct fc_lport *lport,
 
 /**
  * fc_lport_recv_logo_req() - Handle received fabric LOGO request
- * @lport: The local port recieving the LOGO
+ * @lport: The local port receiving the LOGO
  * @fp:	   The LOGO request frame
  *
  * Locking Note: The lport lock is exected to be held before calling
@@ -771,7 +771,7 @@ EXPORT_SYMBOL(fc_lport_set_local_id);
 
 /**
  * fc_lport_recv_flogi_req() - Receive a FLOGI request
- * @lport: The local port that recieved the request
+ * @lport: The local port that received the request
  * @rx_fp: The FLOGI frame
  *
  * A received FLOGI request indicates a point-to-point connection.
@@ -858,7 +858,7 @@ out:
  * if an rport should handle the request.
  *
  * Locking Note: This function should not be called with the lport
- *		 lock held becuase it will grab the lock.
+ *		 lock held because it will grab the lock.
  */
 static void fc_lport_recv_els_req(struct fc_lport *lport,
 				  struct fc_frame *fp)
@@ -925,7 +925,7 @@ struct fc4_prov fc_lport_els_prov = {
  * @fp: The frame the request is in
  *
  * Locking Note: This function should not be called with the lport
- *		 lock held becuase it may grab the lock.
+ *		 lock held because it may grab the lock.
  */
 static void fc_lport_recv_req(struct fc_lport *lport,
 			      struct fc_frame *fp)
@@ -1590,7 +1590,6 @@ void fc_lport_enter_flogi(struct fc_lport *lport)
  */
 int fc_lport_config(struct fc_lport *lport)
 {
-	INIT_LIST_HEAD(&lport->ema_list);
 	INIT_DELAYED_WORK(&lport->retry_work, fc_lport_timeout);
 	mutex_init(&lport->lp_mutex);
 
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index f3f693b772a..874e29d9533 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -240,7 +240,7 @@ static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
 				       disc_resp, DISCOVER_RESP_SIZE);
 		if (res)
 			return res;
-		/* This is detecting a failure to transmit inital
+		/* This is detecting a failure to transmit initial
 		 * dev to host FIS as described in section G.5 of
 		 * sas-2 r 04b */
 		dr = &((struct smp_resp *)disc_resp)->disc;
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 60e98a62f30..02d53d89534 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -805,6 +805,8 @@ struct lpfc_hba {
 	struct dentry *idiag_root;
 	struct dentry *idiag_pci_cfg;
 	struct dentry *idiag_que_info;
+	struct dentry *idiag_que_acc;
+	struct dentry *idiag_drb_acc;
 #endif
 
 	/* Used for deferred freeing of ELS data buffers */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 4e0faa00b96..17d789325f4 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4515,7 +4515,7 @@ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
  * Description:
  * This function is called by the transport after the @fc_vport's symbolic name
  * has been changed. This function re-registers the symbolic name with the
- * switch to propogate the change into the fabric if the vport is active.
+ * switch to propagate the change into the fabric if the vport is active.
  **/
 static void
 lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 793b9f1131f..37e2a1272f8 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1939,7 +1939,7 @@ out:
  * @rxxri: Receive exchange id
  * @len: Number of data bytes
  *
- * This function allocates and posts a data buffer of sufficient size to recieve
+ * This function allocates and posts a data buffer of sufficient size to receive
  * an unsolicted CT command.
  **/
 static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri,
@@ -2426,6 +2426,7 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 {
 	struct bsg_job_data *dd_data;
 	struct fc_bsg_job *job;
+	struct lpfc_mbx_nembed_cmd *nembed_sge;
 	uint32_t size;
 	unsigned long flags;
 	uint8_t *to;
@@ -2469,9 +2470,8 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 			memcpy(to, from, size);
 		} else if ((phba->sli_rev == LPFC_SLI_REV4) &&
 			(pmboxq->u.mb.mbxCommand == MBX_SLI4_CONFIG)) {
-			struct lpfc_mbx_nembed_cmd *nembed_sge =
-				(struct lpfc_mbx_nembed_cmd *)
-				&pmboxq->u.mb.un.varWords[0];
+			nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+					&pmboxq->u.mb.un.varWords[0];
 
 			from = (uint8_t *)dd_data->context_un.mbox.dmp->dma.
 						virt;
@@ -2496,16 +2496,18 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
 					job->reply_payload.sg_cnt,
 					from, size);
 		job->reply->result = 0;
-
+		/* need to hold the lock until we set job->dd_data to NULL
+		 * to hold off the timeout handler returning to the mid-layer
+		 * while we are still processing the job.
+		 */
 		job->dd_data = NULL;
+		dd_data->context_un.mbox.set_job = NULL;
+		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
 		job->job_done(job);
+	} else {
+		dd_data->context_un.mbox.set_job = NULL;
+		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
 	}
-	dd_data->context_un.mbox.set_job = NULL;
-	/* need to hold the lock until we call job done to hold off
-	 * the timeout handler returning to the midlayer while
-	 * we are stillprocessing the job
-	 */
-	spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
 
 	kfree(dd_data->context_un.mbox.mb);
 	mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool);
@@ -2644,6 +2646,11 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 	struct ulp_bde64 *rxbpl = NULL;
 	struct dfc_mbox_req *mbox_req = (struct dfc_mbox_req *)
 		job->request->rqst_data.h_vendor.vendor_cmd;
+	struct READ_EVENT_LOG_VAR *rdEventLog;
+	uint32_t transmit_length, receive_length, mode;
+	struct lpfc_mbx_nembed_cmd *nembed_sge;
+	struct mbox_header *header;
+	struct ulp_bde64 *bde;
 	uint8_t *ext = NULL;
 	int rc = 0;
 	uint8_t *from;
@@ -2651,9 +2658,16 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 	/* in case no data is transferred */
 	job->reply->reply_payload_rcv_len = 0;
 
+	/* sanity check to protect driver */
+	if (job->reply_payload.payload_len > BSG_MBOX_SIZE ||
+	    job->request_payload.payload_len > BSG_MBOX_SIZE) {
+		rc = -ERANGE;
+		goto job_done;
+	}
+
 	/* check if requested extended data lengths are valid */
-	if ((mbox_req->inExtWLen > MAILBOX_EXT_SIZE) ||
-		(mbox_req->outExtWLen > MAILBOX_EXT_SIZE)) {
+	if ((mbox_req->inExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t)) ||
+	    (mbox_req->outExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t))) {
 		rc = -ERANGE;
 		goto job_done;
 	}
@@ -2744,8 +2758,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 	 * use ours
 	 */
 	if (pmb->mbxCommand == MBX_RUN_BIU_DIAG64) {
-		uint32_t transmit_length = pmb->un.varWords[1];
-		uint32_t receive_length = pmb->un.varWords[4];
+		transmit_length = pmb->un.varWords[1];
+		receive_length = pmb->un.varWords[4];
 		/* transmit length cannot be greater than receive length or
 		 * mailbox extension size
 		 */
@@ -2795,10 +2809,9 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 		from += sizeof(MAILBOX_t);
 		memcpy((uint8_t *)dmp->dma.virt, from, transmit_length);
 	} else if (pmb->mbxCommand == MBX_READ_EVENT_LOG) {
-		struct READ_EVENT_LOG_VAR *rdEventLog =
-			&pmb->un.varRdEventLog ;
-		uint32_t receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize;
-		uint32_t mode =	 bf_get(lpfc_event_log, rdEventLog);
+		rdEventLog = &pmb->un.varRdEventLog;
+		receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize;
+		mode = bf_get(lpfc_event_log, rdEventLog);
 
 		/* receive length cannot be greater than mailbox
 		 * extension size
@@ -2843,7 +2856,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 			/* rebuild the command for sli4 using our own buffers
 			* like we do for biu diags
 			*/
-			uint32_t receive_length = pmb->un.varWords[2];
+			receive_length = pmb->un.varWords[2];
 			/* receive length cannot be greater than mailbox
 			 * extension size
 			 */
@@ -2879,8 +2892,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 			pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys);
 		} else if ((pmb->mbxCommand == MBX_UPDATE_CFG) &&
 			pmb->un.varUpdateCfg.co) {
-			struct ulp_bde64 *bde =
-				(struct ulp_bde64 *)&pmb->un.varWords[4];
+			bde = (struct ulp_bde64 *)&pmb->un.varWords[4];
 
 			/* bde size cannot be greater than mailbox ext size */
 			if (bde->tus.f.bdeSize > MAILBOX_EXT_SIZE) {
@@ -2921,10 +2933,6 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 			memcpy((uint8_t *)dmp->dma.virt, from,
 				bde->tus.f.bdeSize);
 		} else if (pmb->mbxCommand == MBX_SLI4_CONFIG) {
-			struct lpfc_mbx_nembed_cmd *nembed_sge;
-			struct mbox_header *header;
-			uint32_t receive_length;
-
 			/* rebuild the command for sli4 using our own buffers
 			* like we do for biu diags
 			*/
@@ -3386,6 +3394,7 @@ no_dd_data:
 	job->dd_data = NULL;
 	return rc;
 }
+
 /**
  * lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job
  * @job: fc_bsg_job to handle
diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h
index a2c33e7c915..b542aca6f5a 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.h
+++ b/drivers/scsi/lpfc/lpfc_bsg.h
@@ -109,3 +109,133 @@ struct menlo_response {
 	uint32_t xri; /* return the xri of the iocb exchange */
 };
 
+/*
+ * macros and data structures for handling sli-config mailbox command
+ * pass-through support, this header file is shared between user and
+ * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h,
+ * with macro names prefixed with bsg_, as the macros defined in
+ * lpfc_hw4.h are not accessible from user space.
+ */
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ *      struct temp {
+ *              uint32_t        field1;
+ *              uint32_t        field2;
+ *              uint32_t        field3;
+ *              uint32_t        field4;
+ *      #define example_bit_field_SHIFT         7
+ *      #define example_bit_field_MASK          0x03
+ *      #define example_bit_field_WORD          field4
+ *              uint32_t        field5;
+ *      };
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ *      struct temp t1;
+ *      value = bsg_bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ *      bsg_bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ *      bsg_bf_set(example_bit_field, &t1, 0);
+ */
+#define bsg_bf_get_le32(name, ptr) \
+	((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK)
+#define bsg_bf_get(name, ptr) \
+	(((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bsg_bf_set_le32(name, ptr, value) \
+	((ptr)->name##_WORD = cpu_to_le32(((((value) & \
+	name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \
+	~(name##_MASK << name##_SHIFT)))))
+#define bsg_bf_set(name, ptr, value) \
+	((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+	((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+/*
+ * The sli_config structure specified here is based on the following
+ * restriction:
+ *
+ * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without
+ *    carrying HBD.
+ * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or
+ *    without carrying HBDs.
+ */
+
+struct lpfc_sli_config_mse {
+	uint32_t pa_lo;
+	uint32_t pa_hi;
+	uint32_t buf_len;
+#define lpfc_mbox_sli_config_mse_len_SHIFT	0
+#define lpfc_mbox_sli_config_mse_len_MASK	0xffffff
+#define lpfc_mbox_sli_config_mse_len_WORD	buf_len
+};
+
+struct lpfc_sli_config_subcmd_hbd {
+	uint32_t buf_len;
+#define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT	0
+#define lpfc_mbox_sli_config_ecmn_hbd_len_MASK	0xffffff
+#define lpfc_mbox_sli_config_ecmn_hbd_len_WORD	buf_len
+	uint32_t pa_lo;
+	uint32_t pa_hi;
+};
+
+struct lpfc_sli_config_hdr {
+	uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT		0
+#define lpfc_mbox_hdr_emb_MASK		0x00000001
+#define lpfc_mbox_hdr_emb_WORD		word1
+#define lpfc_mbox_hdr_mse_cnt_SHIFT	3
+#define lpfc_mbox_hdr_mse_cnt_MASK	0x0000001f
+#define lpfc_mbox_hdr_mse_cnt_WORD	word1
+	uint32_t payload_length;
+	uint32_t tag_lo;
+	uint32_t tag_hi;
+	uint32_t reserved5;
+};
+
+struct lpfc_sli_config_generic {
+	struct lpfc_sli_config_hdr	sli_config_hdr;
+#define LPFC_MBX_SLI_CONFIG_MAX_MSE     19
+	struct lpfc_sli_config_mse	mse[LPFC_MBX_SLI_CONFIG_MAX_MSE];
+};
+
+struct lpfc_sli_config_subcmnd {
+	struct lpfc_sli_config_hdr	sli_config_hdr;
+	uint32_t word6;
+#define lpfc_subcmnd_opcode_SHIFT	0
+#define lpfc_subcmnd_opcode_MASK	0xff
+#define lpfc_subcmnd_opcode_WORD	word6
+#define lpfc_subcmnd_subsys_SHIFT	8
+#define lpfc_subcmnd_subsys_MASK	0xff
+#define lpfc_subcmnd_subsys_WORD	word6
+	uint32_t timeout;
+	uint32_t request_length;
+	uint32_t word9;
+#define lpfc_subcmnd_version_SHIFT	0
+#define lpfc_subcmnd_version_MASK	0xff
+#define lpfc_subcmnd_version_WORD	word9
+	uint32_t word10;
+#define lpfc_subcmnd_ask_rd_len_SHIFT	0
+#define lpfc_subcmnd_ask_rd_len_MASK	0xffffff
+#define lpfc_subcmnd_ask_rd_len_WORD	word10
+	uint32_t rd_offset;
+	uint32_t obj_name[26];
+	uint32_t hbd_count;
+#define LPFC_MBX_SLI_CONFIG_MAX_HBD	10
+	struct lpfc_sli_config_subcmd_hbd   hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
+};
+
+struct lpfc_sli_config_mbox {
+	uint32_t word0;
+#define lpfc_mqe_status_SHIFT		16
+#define lpfc_mqe_status_MASK		0x0000FFFF
+#define lpfc_mqe_status_WORD		word0
+#define lpfc_mqe_command_SHIFT		8
+#define lpfc_mqe_command_MASK		0x000000FF
+#define lpfc_mqe_command_WORD		word0
+	union {
+		struct lpfc_sli_config_generic	sli_config_generic;
+		struct lpfc_sli_config_subcmnd	sli_config_subcmnd;
+	} un;
+};
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index a753581509d..c93fca05860 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -908,7 +908,7 @@ lpfc_debugfs_dumpData_open(struct inode *inode, struct file *file)
 	if (!debug)
 		goto out;
 
-	/* Round to page boundry */
+	/* Round to page boundary */
 	printk(KERN_ERR "9059 BLKGRD:  %s: _dump_buf_data=0x%p\n",
 			__func__, _dump_buf_data);
 	debug->buffer = _dump_buf_data;
@@ -938,7 +938,7 @@ lpfc_debugfs_dumpDif_open(struct inode *inode, struct file *file)
 	if (!debug)
 		goto out;
 
-	/* Round to page boundry */
+	/* Round to page boundary */
 	printk(KERN_ERR	"9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%s\n",
 		__func__, _dump_buf_dif, file->f_dentry->d_name.name);
 	debug->buffer = _dump_buf_dif;
@@ -1119,172 +1119,14 @@ lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file)
 }
 
 /*
+ * ---------------------------------
  * iDiag debugfs file access methods
- */
-
-/*
- * iDiag PCI config space register access methods:
- *
- * The PCI config space register accessees of read, write, read-modify-write
- * for set bits, and read-modify-write for clear bits to SLI4 PCI functions
- * are provided. In the proper SLI4 PCI function's debugfs iDiag directory,
- *
- *      /sys/kernel/debug/lpfc/fn<#>/iDiag
- *
- * the access is through the debugfs entry pciCfg:
- *
- * 1. For PCI config space register read access, there are two read methods:
- *    A) read a single PCI config space register in the size of a byte
- *    (8 bits), a word (16 bits), or a dword (32 bits); or B) browse through
- *    the 4K extended PCI config space.
- *
- *    A) Read a single PCI config space register consists of two steps:
- *
- *    Step-1: Set up PCI config space register read command, the command
- *    syntax is,
- *
- *        echo 1 <where> <count> > pciCfg
- *
- *    where, 1 is the iDiag command for PCI config space read, <where> is the
- *    offset from the beginning of the device's PCI config space to read from,
- *    and <count> is the size of PCI config space register data to read back,
- *    it will be 1 for reading a byte (8 bits), 2 for reading a word (16 bits
- *    or 2 bytes), or 4 for reading a dword (32 bits or 4 bytes).
- *
- *    Setp-2: Perform the debugfs read operation to execute the idiag command
- *    set up in Step-1,
- *
- *        cat pciCfg
- *
- *    Examples:
- *    To read PCI device's vendor-id and device-id from PCI config space,
- *
- *        echo 1 0 4 > pciCfg
- *        cat pciCfg
- *
- *    To read PCI device's currnt command from config space,
- *
- *        echo 1 4 2 > pciCfg
- *        cat pciCfg
- *
- *    B) Browse through the entire 4K extended PCI config space also consists
- *    of two steps:
- *
- *    Step-1: Set up PCI config space register browsing command, the command
- *    syntax is,
- *
- *        echo 1 0 4096 > pciCfg
- *
- *    where, 1 is the iDiag command for PCI config space read, 0 must be used
- *    as the offset for PCI config space register browse, and 4096 must be
- *    used as the count for PCI config space register browse.
- *
- *    Step-2: Repeately issue the debugfs read operation to browse through
- *    the entire PCI config space registers:
- *
- *        cat pciCfg
- *        cat pciCfg
- *        cat pciCfg
- *        ...
- *
- *    When browsing to the end of the 4K PCI config space, the browse method
- *    shall wrap around to start reading from beginning again, and again...
- *
- * 2. For PCI config space register write access, it supports a single PCI
- *    config space register write in the size of a byte (8 bits), a word
- *    (16 bits), or a dword (32 bits). The command syntax is,
- *
- *        echo 2 <where> <count> <value> > pciCfg
- *
- *    where, 2 is the iDiag command for PCI config space write, <where> is
- *    the offset from the beginning of the device's PCI config space to write
- *    into, <count> is the size of data to write into the PCI config space,
- *    it will be 1 for writing a byte (8 bits), 2 for writing a word (16 bits
- *    or 2 bytes), or 4 for writing a dword (32 bits or 4 bytes), and <value>
- *    is the data to be written into the PCI config space register at the
- *    offset.
- *
- *    Examples:
- *    To disable PCI device's interrupt assertion,
- *
- *    1) Read in device's PCI config space register command field <cmd>:
- *
- *           echo 1 4 2 > pciCfg
- *           cat pciCfg
- *
- *    2) Set bit 10 (Interrupt Disable bit) in the <cmd>:
- *
- *           <cmd> = <cmd> | (1 < 10)
- *
- *    3) Write the modified command back:
- *
- *           echo 2 4 2 <cmd> > pciCfg
- *
- * 3. For PCI config space register set bits access, it supports a single PCI
- *    config space register set bits in the size of a byte (8 bits), a word
- *    (16 bits), or a dword (32 bits). The command syntax is,
- *
- *        echo 3 <where> <count> <bitmask> > pciCfg
- *
- *    where, 3 is the iDiag command for PCI config space set bits, <where> is
- *    the offset from the beginning of the device's PCI config space to set
- *    bits into, <count> is the size of the bitmask to set into the PCI config
- *    space, it will be 1 for setting a byte (8 bits), 2 for setting a word
- *    (16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 bytes), and
- *    <bitmask> is the bitmask, indicating the bits to be set into the PCI
- *    config space register at the offset. The logic performed to the content
- *    of the PCI config space register, regval, is,
- *
- *        regval |= <bitmask>
- *
- * 4. For PCI config space register clear bits access, it supports a single
- *    PCI config space register clear bits in the size of a byte (8 bits),
- *    a word (16 bits), or a dword (32 bits). The command syntax is,
- *
- *        echo 4 <where> <count> <bitmask> > pciCfg
- *
- *    where, 4 is the iDiag command for PCI config space clear bits, <where>
- *    is the offset from the beginning of the device's PCI config space to
- *    clear bits from, <count> is the size of the bitmask to set into the PCI
- *    config space, it will be 1 for setting a byte (8 bits), 2 for setting
- *    a word(16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4
- *    bytes), and <bitmask> is the bitmask, indicating the bits to be cleared
- *    from the PCI config space register at the offset. the logic performed
- *    to the content of the PCI config space register, regval, is,
- *
- *        regval &= ~<bitmask>
- *
- * Note, for all single register read, write, set bits, or clear bits access,
- * the offset (<where>) must be aligned with the size of the data:
+ * ---------------------------------
  *
- * For data size of byte (8 bits), the offset must be aligned to the byte
- * boundary; for data size of word (16 bits), the offset must be aligned
- * to the word boundary; while for data size of dword (32 bits), the offset
- * must be aligned to the dword boundary. Otherwise, the interface will
- * return the error:
+ * All access methods are through the proper SLI4 PCI function's debugfs
+ * iDiag directory:
  *
- *     "-bash: echo: write error: Invalid argument".
- *
- * For example:
- *
- *     echo 1 2 4 > pciCfg
- *     -bash: echo: write error: Invalid argument
- *
- * Note also, all of the numbers in the command fields for all read, write,
- * set bits, and clear bits PCI config space register command fields can be
- * either decimal or hex.
- *
- * For example,
- *     echo 1 0 4096 > pciCfg
- *
- * will be the same as
- *     echo 1 0 0x1000 > pciCfg
- *
- * And,
- *     echo 2 155 1 10 > pciCfg
- *
- * will be
- *     echo 2 0x9b 1 0xa > pciCfg
+ *     /sys/kernel/debug/lpfc/fn<#>/iDiag
  */
 
 /**
@@ -1331,10 +1173,10 @@ static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes,
 	for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) {
 		step_str = strsep(&pbuf, "\t ");
 		if (!step_str)
-			return 0;
+			return i;
 		idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0);
 	}
-	return 0;
+	return i;
 }
 
 /**
@@ -1403,7 +1245,7 @@ lpfc_idiag_release(struct inode *inode, struct file *file)
  * Description:
  * This routine frees the buffer that was allocated when the debugfs file
  * was opened. It also reset the fields in the idiag command struct in the
- * case the command is not continuous browsing of the data structure.
+ * case of command for write operation.
  *
  * Returns:
  * This function returns zero.
@@ -1413,18 +1255,20 @@ lpfc_idiag_cmd_release(struct inode *inode, struct file *file)
 {
 	struct lpfc_debug *debug = file->private_data;
 
-	/* Read PCI config register, if not read all, clear command fields */
-	if ((debug->op == LPFC_IDIAG_OP_RD) &&
-	    (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD))
-		if ((idiag.cmd.data[1] == sizeof(uint8_t)) ||
-		    (idiag.cmd.data[1] == sizeof(uint16_t)) ||
-		    (idiag.cmd.data[1] == sizeof(uint32_t)))
+	if (debug->op == LPFC_IDIAG_OP_WR) {
+		switch (idiag.cmd.opcode) {
+		case LPFC_IDIAG_CMD_PCICFG_WR:
+		case LPFC_IDIAG_CMD_PCICFG_ST:
+		case LPFC_IDIAG_CMD_PCICFG_CL:
+		case LPFC_IDIAG_CMD_QUEACC_WR:
+		case LPFC_IDIAG_CMD_QUEACC_ST:
+		case LPFC_IDIAG_CMD_QUEACC_CL:
 			memset(&idiag, 0, sizeof(idiag));
-
-	/* Write PCI config register, clear command fields */
-	if ((debug->op == LPFC_IDIAG_OP_WR) &&
-	    (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR))
-		memset(&idiag, 0, sizeof(idiag));
+			break;
+		default:
+			break;
+		}
+	}
 
 	/* Free the buffers to the file operation */
 	kfree(debug->buffer);
@@ -1504,7 +1348,7 @@ lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes,
 		len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
 				"%03x: %08x\n", where, u32val);
 		break;
-	case LPFC_PCI_CFG_SIZE: /* browse all */
+	case LPFC_PCI_CFG_BROWSE: /* browse all */
 		goto pcicfg_browse;
 		break;
 	default:
@@ -1586,16 +1430,21 @@ lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf,
 	debug->op = LPFC_IDIAG_OP_WR;
 
 	rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
-	if (rc)
+	if (rc < 0)
 		return rc;
 
 	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
+		/* Sanity check on PCI config read command line arguments */
+		if (rc != LPFC_PCI_CFG_RD_CMD_ARG)
+			goto error_out;
 		/* Read command from PCI config space, set up command fields */
 		where = idiag.cmd.data[0];
 		count = idiag.cmd.data[1];
-		if (count == LPFC_PCI_CFG_SIZE) {
-			if (where != 0)
+		if (count == LPFC_PCI_CFG_BROWSE) {
+			if (where % sizeof(uint32_t))
 				goto error_out;
+			/* Starting offset to browse */
+			idiag.offset.last_rd = where;
 		} else if ((count != sizeof(uint8_t)) &&
 			   (count != sizeof(uint16_t)) &&
 			   (count != sizeof(uint32_t)))
@@ -1621,6 +1470,9 @@ lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf,
 	} else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR ||
 		   idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST ||
 		   idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+		/* Sanity check on PCI config write command line arguments */
+		if (rc != LPFC_PCI_CFG_WR_CMD_ARG)
+			goto error_out;
 		/* Write command to PCI config space, read-modify-write */
 		where = idiag.cmd.data[0];
 		count = idiag.cmd.data[1];
@@ -1753,10 +1605,12 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
 			"Slow-path EQ information:\n");
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\tID [%02d], EQE-COUNT [%04d], "
-			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			"\tEQID[%02d], "
+			"QE-COUNT[%04d], QE-SIZE[%04d], "
+			"HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
 			phba->sli4_hba.sp_eq->queue_id,
 			phba->sli4_hba.sp_eq->entry_count,
+			phba->sli4_hba.sp_eq->entry_size,
 			phba->sli4_hba.sp_eq->host_index,
 			phba->sli4_hba.sp_eq->hba_index);
 
@@ -1765,10 +1619,12 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
 			"Fast-path EQ information:\n");
 	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
 		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-				"\tID [%02d], EQE-COUNT [%04d], "
-				"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+				"\tEQID[%02d], "
+				"QE-COUNT[%04d], QE-SIZE[%04d], "
+				"HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
 				phba->sli4_hba.fp_eq[fcp_qidx]->queue_id,
 				phba->sli4_hba.fp_eq[fcp_qidx]->entry_count,
+				phba->sli4_hba.fp_eq[fcp_qidx]->entry_size,
 				phba->sli4_hba.fp_eq[fcp_qidx]->host_index,
 				phba->sli4_hba.fp_eq[fcp_qidx]->hba_index);
 	}
@@ -1776,89 +1632,101 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
 
 	/* Get mailbox complete queue information */
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"Mailbox CQ information:\n");
+			"Slow-path MBX CQ information:\n");
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\t\tAssociated EQ-ID [%02d]:\n",
+			"Associated EQID[%02d]:\n",
 			phba->sli4_hba.mbx_cq->assoc_qid);
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\tID [%02d], CQE-COUNT [%04d], "
-			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			"\tCQID[%02d], "
+			"QE-COUNT[%04d], QE-SIZE[%04d], "
+			"HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
 			phba->sli4_hba.mbx_cq->queue_id,
 			phba->sli4_hba.mbx_cq->entry_count,
+			phba->sli4_hba.mbx_cq->entry_size,
 			phba->sli4_hba.mbx_cq->host_index,
 			phba->sli4_hba.mbx_cq->hba_index);
 
 	/* Get slow-path complete queue information */
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"Slow-path CQ information:\n");
+			"Slow-path ELS CQ information:\n");
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\t\tAssociated EQ-ID [%02d]:\n",
+			"Associated EQID[%02d]:\n",
 			phba->sli4_hba.els_cq->assoc_qid);
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\tID [%02d], CQE-COUNT [%04d], "
-			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			"\tCQID [%02d], "
+			"QE-COUNT[%04d], QE-SIZE[%04d], "
+			"HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
 			phba->sli4_hba.els_cq->queue_id,
 			phba->sli4_hba.els_cq->entry_count,
+			phba->sli4_hba.els_cq->entry_size,
 			phba->sli4_hba.els_cq->host_index,
 			phba->sli4_hba.els_cq->hba_index);
 
 	/* Get fast-path complete queue information */
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"Fast-path CQ information:\n");
+			"Fast-path FCP CQ information:\n");
 	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
 		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-				"\t\tAssociated EQ-ID [%02d]:\n",
+				"Associated EQID[%02d]:\n",
 				phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid);
 		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-		"\tID [%02d], EQE-COUNT [%04d], "
-		"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
-		phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id,
-		phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count,
-		phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
-		phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
+				"\tCQID[%02d], "
+				"QE-COUNT[%04d], QE-SIZE[%04d], "
+				"HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
+				phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id,
+				phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count,
+				phba->sli4_hba.fcp_cq[fcp_qidx]->entry_size,
+				phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
+				phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
 	}
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
 
 	/* Get mailbox queue information */
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"Mailbox MQ information:\n");
+			"Slow-path MBX MQ information:\n");
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\t\tAssociated CQ-ID [%02d]:\n",
+			"Associated CQID[%02d]:\n",
 			phba->sli4_hba.mbx_wq->assoc_qid);
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\tID [%02d], MQE-COUNT [%04d], "
-			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			"\tWQID[%02d], "
+			"QE-COUNT[%04d], QE-SIZE[%04d], "
+			"HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
 			phba->sli4_hba.mbx_wq->queue_id,
 			phba->sli4_hba.mbx_wq->entry_count,
+			phba->sli4_hba.mbx_wq->entry_size,
 			phba->sli4_hba.mbx_wq->host_index,
 			phba->sli4_hba.mbx_wq->hba_index);
 
 	/* Get slow-path work queue information */
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"Slow-path WQ information:\n");
+			"Slow-path ELS WQ information:\n");
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\t\tAssociated CQ-ID [%02d]:\n",
+			"Associated CQID[%02d]:\n",
 			phba->sli4_hba.els_wq->assoc_qid);
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\tID [%02d], WQE-COUNT [%04d], "
-			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			"\tWQID[%02d], "
+			"QE-COUNT[%04d], QE-SIZE[%04d], "
+			"HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n",
 			phba->sli4_hba.els_wq->queue_id,
 			phba->sli4_hba.els_wq->entry_count,
+			phba->sli4_hba.els_wq->entry_size,
 			phba->sli4_hba.els_wq->host_index,
 			phba->sli4_hba.els_wq->hba_index);
 
 	/* Get fast-path work queue information */
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"Fast-path WQ information:\n");
+			"Fast-path FCP WQ information:\n");
 	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++) {
 		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-				"\t\tAssociated CQ-ID [%02d]:\n",
+				"Associated CQID[%02d]:\n",
 				phba->sli4_hba.fcp_wq[fcp_qidx]->assoc_qid);
 		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-				"\tID [%02d], WQE-COUNT [%04d], "
-				"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+				"\tWQID[%02d], "
+				"QE-COUNT[%04d], WQE-SIZE[%04d], "
+				"HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
 				phba->sli4_hba.fcp_wq[fcp_qidx]->queue_id,
 				phba->sli4_hba.fcp_wq[fcp_qidx]->entry_count,
+				phba->sli4_hba.fcp_wq[fcp_qidx]->entry_size,
 				phba->sli4_hba.fcp_wq[fcp_qidx]->host_index,
 				phba->sli4_hba.fcp_wq[fcp_qidx]->hba_index);
 	}
@@ -1868,26 +1736,597 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
 			"Slow-path RQ information:\n");
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\t\tAssociated CQ-ID [%02d]:\n",
+			"Associated CQID[%02d]:\n",
 			phba->sli4_hba.hdr_rq->assoc_qid);
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\tID [%02d], RHQE-COUNT [%04d], "
-			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+			"\tHQID[%02d], "
+			"QE-COUNT[%04d], QE-SIZE[%04d], "
+			"HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
 			phba->sli4_hba.hdr_rq->queue_id,
 			phba->sli4_hba.hdr_rq->entry_count,
+			phba->sli4_hba.hdr_rq->entry_size,
 			phba->sli4_hba.hdr_rq->host_index,
 			phba->sli4_hba.hdr_rq->hba_index);
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
-			"\tID [%02d], RDQE-COUNT [%04d], "
-			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+			"\tDQID[%02d], "
+			"QE-COUNT[%04d], QE-SIZE[%04d], "
+			"HOST-INDEX[%04d], PORT-INDEX[%04d]\n",
 			phba->sli4_hba.dat_rq->queue_id,
 			phba->sli4_hba.dat_rq->entry_count,
+			phba->sli4_hba.dat_rq->entry_size,
 			phba->sli4_hba.dat_rq->host_index,
 			phba->sli4_hba.dat_rq->hba_index);
 
 	return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
 }
 
+/**
+ * lpfc_idiag_que_param_check - queue access command parameter sanity check
+ * @q: The pointer to queue structure.
+ * @index: The index into a queue entry.
+ * @count: The number of queue entries to access.
+ *
+ * Description:
+ * The routine performs sanity check on device queue access method commands.
+ *
+ * Returns:
+ * This function returns -EINVAL when fails the sanity check, otherwise, it
+ * returns 0.
+ **/
+static int
+lpfc_idiag_que_param_check(struct lpfc_queue *q, int index, int count)
+{
+	/* Only support single entry read or browsing */
+	if ((count != 1) && (count != LPFC_QUE_ACC_BROWSE))
+		return -EINVAL;
+	if (index > q->entry_count - 1)
+		return -EINVAL;
+	return 0;
+}
+
+/**
+ * lpfc_idiag_queacc_read_qe - read a single entry from the given queue index
+ * @pbuffer: The pointer to buffer to copy the read data into.
+ * @pque: The pointer to the queue to be read.
+ * @index: The index into the queue entry.
+ *
+ * Description:
+ * This routine reads out a single entry from the given queue's index location
+ * and copies it into the buffer provided.
+ *
+ * Returns:
+ * This function returns 0 when it fails, otherwise, it returns the length of
+ * the data read into the buffer provided.
+ **/
+static int
+lpfc_idiag_queacc_read_qe(char *pbuffer, int len, struct lpfc_queue *pque,
+			  uint32_t index)
+{
+	int offset, esize;
+	uint32_t *pentry;
+
+	if (!pbuffer || !pque)
+		return 0;
+
+	esize = pque->entry_size;
+	len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len,
+			"QE-INDEX[%04d]:\n", index);
+
+	offset = 0;
+	pentry = pque->qe[index].address;
+	while (esize > 0) {
+		len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len,
+				"%08x ", *pentry);
+		pentry++;
+		offset += sizeof(uint32_t);
+		esize -= sizeof(uint32_t);
+		if (esize > 0 && !(offset % (4 * sizeof(uint32_t))))
+			len += snprintf(pbuffer+len,
+					LPFC_QUE_ACC_BUF_SIZE-len, "\n");
+	}
+	len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, "\n");
+
+	return len;
+}
+
+/**
+ * lpfc_idiag_queacc_read - idiag debugfs read port queue
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba device queue memory according to the
+ * idiag command, and copies to user @buf. Depending on the queue dump read
+ * command setup, it does either a single queue entry read or browing through
+ * all entries of the queue.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_queacc_read(struct file *file, char __user *buf, size_t nbytes,
+		       loff_t *ppos)
+{
+	struct lpfc_debug *debug = file->private_data;
+	uint32_t last_index, index, count;
+	struct lpfc_queue *pque = NULL;
+	char *pbuffer;
+	int len = 0;
+
+	/* This is a user read operation */
+	debug->op = LPFC_IDIAG_OP_RD;
+
+	if (!debug->buffer)
+		debug->buffer = kmalloc(LPFC_QUE_ACC_BUF_SIZE, GFP_KERNEL);
+	if (!debug->buffer)
+		return 0;
+	pbuffer = debug->buffer;
+
+	if (*ppos)
+		return 0;
+
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+		index = idiag.cmd.data[2];
+		count = idiag.cmd.data[3];
+		pque = (struct lpfc_queue *)idiag.ptr_private;
+	} else
+		return 0;
+
+	/* Browse the queue starting from index */
+	if (count == LPFC_QUE_ACC_BROWSE)
+		goto que_browse;
+
+	/* Read a single entry from the queue */
+	len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index);
+
+	return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+
+que_browse:
+
+	/* Browse all entries from the queue */
+	last_index = idiag.offset.last_rd;
+	index = last_index;
+
+	while (len < LPFC_QUE_ACC_SIZE - pque->entry_size) {
+		len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index);
+		index++;
+		if (index > pque->entry_count - 1)
+			break;
+	}
+
+	/* Set up the offset for next portion of pci cfg read */
+	if (index > pque->entry_count - 1)
+		index = 0;
+	idiag.offset.last_rd = index;
+
+	return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
+/**
+ * lpfc_idiag_queacc_write - Syntax check and set up idiag queacc commands
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the user data from.
+ * @nbytes: The number of bytes to get.
+ * @ppos: The position in the file to start reading from.
+ *
+ * This routine get the debugfs idiag command struct from user space and then
+ * perform the syntax check for port queue read (dump) or write (set) command
+ * accordingly. In the case of port queue read command, it sets up the command
+ * in the idiag command struct for the following debugfs read operation. In
+ * the case of port queue write operation, it executes the write operation
+ * into the port queue entry accordingly.
+ *
+ * It returns the @nbytges passing in from debugfs user space when successful.
+ * In case of error conditions, it returns proper error code back to the user
+ * space.
+ **/
+static ssize_t
+lpfc_idiag_queacc_write(struct file *file, const char __user *buf,
+			size_t nbytes, loff_t *ppos)
+{
+	struct lpfc_debug *debug = file->private_data;
+	struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+	uint32_t qidx, quetp, queid, index, count, offset, value;
+	uint32_t *pentry;
+	struct lpfc_queue *pque;
+	int rc;
+
+	/* This is a user write operation */
+	debug->op = LPFC_IDIAG_OP_WR;
+
+	rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
+	if (rc < 0)
+		return rc;
+
+	/* Get and sanity check on command feilds */
+	quetp  = idiag.cmd.data[0];
+	queid  = idiag.cmd.data[1];
+	index  = idiag.cmd.data[2];
+	count  = idiag.cmd.data[3];
+	offset = idiag.cmd.data[4];
+	value  = idiag.cmd.data[5];
+
+	/* Sanity check on command line arguments */
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR ||
+	    idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST ||
+	    idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) {
+		if (rc != LPFC_QUE_ACC_WR_CMD_ARG)
+			goto error_out;
+		if (count != 1)
+			goto error_out;
+	} else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+		if (rc != LPFC_QUE_ACC_RD_CMD_ARG)
+			goto error_out;
+	} else
+		goto error_out;
+
+	switch (quetp) {
+	case LPFC_IDIAG_EQ:
+		/* Slow-path event queue */
+		if (phba->sli4_hba.sp_eq->queue_id == queid) {
+			/* Sanity check */
+			rc = lpfc_idiag_que_param_check(
+					phba->sli4_hba.sp_eq, index, count);
+			if (rc)
+				goto error_out;
+			idiag.ptr_private = phba->sli4_hba.sp_eq;
+			goto pass_check;
+		}
+		/* Fast-path event queue */
+		for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) {
+			if (phba->sli4_hba.fp_eq[qidx]->queue_id == queid) {
+				/* Sanity check */
+				rc = lpfc_idiag_que_param_check(
+						phba->sli4_hba.fp_eq[qidx],
+						index, count);
+				if (rc)
+					goto error_out;
+				idiag.ptr_private = phba->sli4_hba.fp_eq[qidx];
+				goto pass_check;
+			}
+		}
+		goto error_out;
+		break;
+	case LPFC_IDIAG_CQ:
+		/* MBX complete queue */
+		if (phba->sli4_hba.mbx_cq->queue_id == queid) {
+			/* Sanity check */
+			rc = lpfc_idiag_que_param_check(
+					phba->sli4_hba.mbx_cq, index, count);
+			if (rc)
+				goto error_out;
+			idiag.ptr_private = phba->sli4_hba.mbx_cq;
+			goto pass_check;
+		}
+		/* ELS complete queue */
+		if (phba->sli4_hba.els_cq->queue_id == queid) {
+			/* Sanity check */
+			rc = lpfc_idiag_que_param_check(
+					phba->sli4_hba.els_cq, index, count);
+			if (rc)
+				goto error_out;
+			idiag.ptr_private = phba->sli4_hba.els_cq;
+			goto pass_check;
+		}
+		/* FCP complete queue */
+		for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) {
+			if (phba->sli4_hba.fcp_cq[qidx]->queue_id == queid) {
+				/* Sanity check */
+				rc = lpfc_idiag_que_param_check(
+						phba->sli4_hba.fcp_cq[qidx],
+						index, count);
+				if (rc)
+					goto error_out;
+				idiag.ptr_private =
+						phba->sli4_hba.fcp_cq[qidx];
+				goto pass_check;
+			}
+		}
+		goto error_out;
+		break;
+	case LPFC_IDIAG_MQ:
+		/* MBX work queue */
+		if (phba->sli4_hba.mbx_wq->queue_id == queid) {
+			/* Sanity check */
+			rc = lpfc_idiag_que_param_check(
+					phba->sli4_hba.mbx_wq, index, count);
+			if (rc)
+				goto error_out;
+			idiag.ptr_private = phba->sli4_hba.mbx_wq;
+			goto pass_check;
+		}
+		break;
+	case LPFC_IDIAG_WQ:
+		/* ELS work queue */
+		if (phba->sli4_hba.els_wq->queue_id == queid) {
+			/* Sanity check */
+			rc = lpfc_idiag_que_param_check(
+					phba->sli4_hba.els_wq, index, count);
+			if (rc)
+				goto error_out;
+			idiag.ptr_private = phba->sli4_hba.els_wq;
+			goto pass_check;
+		}
+		/* FCP work queue */
+		for (qidx = 0; qidx < phba->cfg_fcp_wq_count; qidx++) {
+			if (phba->sli4_hba.fcp_wq[qidx]->queue_id == queid) {
+				/* Sanity check */
+				rc = lpfc_idiag_que_param_check(
+						phba->sli4_hba.fcp_wq[qidx],
+						index, count);
+				if (rc)
+					goto error_out;
+				idiag.ptr_private =
+					phba->sli4_hba.fcp_wq[qidx];
+				goto pass_check;
+			}
+		}
+		goto error_out;
+		break;
+	case LPFC_IDIAG_RQ:
+		/* HDR queue */
+		if (phba->sli4_hba.hdr_rq->queue_id == queid) {
+			/* Sanity check */
+			rc = lpfc_idiag_que_param_check(
+					phba->sli4_hba.hdr_rq, index, count);
+			if (rc)
+				goto error_out;
+			idiag.ptr_private = phba->sli4_hba.hdr_rq;
+			goto pass_check;
+		}
+		/* DAT queue */
+		if (phba->sli4_hba.dat_rq->queue_id == queid) {
+			/* Sanity check */
+			rc = lpfc_idiag_que_param_check(
+					phba->sli4_hba.dat_rq, index, count);
+			if (rc)
+				goto error_out;
+			idiag.ptr_private = phba->sli4_hba.dat_rq;
+			goto pass_check;
+		}
+		goto error_out;
+		break;
+	default:
+		goto error_out;
+		break;
+	}
+
+pass_check:
+
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
+		if (count == LPFC_QUE_ACC_BROWSE)
+			idiag.offset.last_rd = index;
+	}
+
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR ||
+	    idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST ||
+	    idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) {
+		/* Additional sanity checks on write operation */
+		pque = (struct lpfc_queue *)idiag.ptr_private;
+		if (offset > pque->entry_size/sizeof(uint32_t) - 1)
+			goto error_out;
+		pentry = pque->qe[index].address;
+		pentry += offset;
+		if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR)
+			*pentry = value;
+		if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST)
+			*pentry |= value;
+		if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL)
+			*pentry &= ~value;
+	}
+	return nbytes;
+
+error_out:
+	/* Clean out command structure on command error out */
+	memset(&idiag, 0, sizeof(idiag));
+	return -EINVAL;
+}
+
+/**
+ * lpfc_idiag_drbacc_read_reg - idiag debugfs read a doorbell register
+ * @phba: The pointer to hba structure.
+ * @pbuffer: The pointer to the buffer to copy the data to.
+ * @len: The lenght of bytes to copied.
+ * @drbregid: The id to doorbell registers.
+ *
+ * Description:
+ * This routine reads a doorbell register and copies its content to the
+ * user buffer pointed to by @pbuffer.
+ *
+ * Returns:
+ * This function returns the amount of data that was copied into @pbuffer.
+ **/
+static int
+lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer,
+			   int len, uint32_t drbregid)
+{
+
+	if (!pbuffer)
+		return 0;
+
+	switch (drbregid) {
+	case LPFC_DRB_EQCQ:
+		len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+				"EQCQ-DRB-REG: 0x%08x\n",
+				readl(phba->sli4_hba.EQCQDBregaddr));
+		break;
+	case LPFC_DRB_MQ:
+		len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+				"MQ-DRB-REG:   0x%08x\n",
+				readl(phba->sli4_hba.MQDBregaddr));
+		break;
+	case LPFC_DRB_WQ:
+		len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+				"WQ-DRB-REG:   0x%08x\n",
+				readl(phba->sli4_hba.WQDBregaddr));
+		break;
+	case LPFC_DRB_RQ:
+		len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
+				"RQ-DRB-REG:   0x%08x\n",
+				readl(phba->sli4_hba.RQDBregaddr));
+		break;
+	default:
+		break;
+	}
+
+	return len;
+}
+
+/**
+ * lpfc_idiag_drbacc_read - idiag debugfs read port doorbell
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba device doorbell register according
+ * to the idiag command, and copies to user @buf. Depending on the doorbell
+ * register read command setup, it does either a single doorbell register
+ * read or dump all doorbell registers.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_drbacc_read(struct file *file, char __user *buf, size_t nbytes,
+		       loff_t *ppos)
+{
+	struct lpfc_debug *debug = file->private_data;
+	struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+	uint32_t drb_reg_id, i;
+	char *pbuffer;
+	int len = 0;
+
+	/* This is a user read operation */
+	debug->op = LPFC_IDIAG_OP_RD;
+
+	if (!debug->buffer)
+		debug->buffer = kmalloc(LPFC_DRB_ACC_BUF_SIZE, GFP_KERNEL);
+	if (!debug->buffer)
+		return 0;
+	pbuffer = debug->buffer;
+
+	if (*ppos)
+		return 0;
+
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD)
+		drb_reg_id = idiag.cmd.data[0];
+	else
+		return 0;
+
+	if (drb_reg_id == LPFC_DRB_ACC_ALL)
+		for (i = 1; i <= LPFC_DRB_MAX; i++)
+			len = lpfc_idiag_drbacc_read_reg(phba,
+							 pbuffer, len, i);
+	else
+		len = lpfc_idiag_drbacc_read_reg(phba,
+						 pbuffer, len, drb_reg_id);
+
+	return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
+/**
+ * lpfc_idiag_drbacc_write - Syntax check and set up idiag drbacc commands
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the user data from.
+ * @nbytes: The number of bytes to get.
+ * @ppos: The position in the file to start reading from.
+ *
+ * This routine get the debugfs idiag command struct from user space and then
+ * perform the syntax check for port doorbell register read (dump) or write
+ * (set) command accordingly. In the case of port queue read command, it sets
+ * up the command in the idiag command struct for the following debugfs read
+ * operation. In the case of port doorbell register write operation, it
+ * executes the write operation into the port doorbell register accordingly.
+ *
+ * It returns the @nbytges passing in from debugfs user space when successful.
+ * In case of error conditions, it returns proper error code back to the user
+ * space.
+ **/
+static ssize_t
+lpfc_idiag_drbacc_write(struct file *file, const char __user *buf,
+			size_t nbytes, loff_t *ppos)
+{
+	struct lpfc_debug *debug = file->private_data;
+	struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+	uint32_t drb_reg_id, value, reg_val;
+	void __iomem *drb_reg;
+	int rc;
+
+	/* This is a user write operation */
+	debug->op = LPFC_IDIAG_OP_WR;
+
+	rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
+	if (rc < 0)
+		return rc;
+
+	/* Sanity check on command line arguments */
+	drb_reg_id = idiag.cmd.data[0];
+	value = idiag.cmd.data[1];
+
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR ||
+	    idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
+	    idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+		if (rc != LPFC_DRB_ACC_WR_CMD_ARG)
+			goto error_out;
+		if (drb_reg_id > LPFC_DRB_MAX)
+			goto error_out;
+	} else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD) {
+		if (rc != LPFC_DRB_ACC_RD_CMD_ARG)
+			goto error_out;
+		if ((drb_reg_id > LPFC_DRB_MAX) &&
+		    (drb_reg_id != LPFC_DRB_ACC_ALL))
+			goto error_out;
+	} else
+		goto error_out;
+
+	/* Perform the write access operation */
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR ||
+	    idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
+	    idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+		switch (drb_reg_id) {
+		case LPFC_DRB_EQCQ:
+			drb_reg = phba->sli4_hba.EQCQDBregaddr;
+			break;
+		case LPFC_DRB_MQ:
+			drb_reg = phba->sli4_hba.MQDBregaddr;
+			break;
+		case LPFC_DRB_WQ:
+			drb_reg = phba->sli4_hba.WQDBregaddr;
+			break;
+		case LPFC_DRB_RQ:
+			drb_reg = phba->sli4_hba.RQDBregaddr;
+			break;
+		default:
+			goto error_out;
+		}
+
+		if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR)
+			reg_val = value;
+		if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST) {
+			reg_val = readl(drb_reg);
+			reg_val |= value;
+		}
+		if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
+			reg_val = readl(drb_reg);
+			reg_val &= ~value;
+		}
+		writel(reg_val, drb_reg);
+		readl(drb_reg); /* flush */
+	}
+	return nbytes;
+
+error_out:
+	/* Clean out command structure on command error out */
+	memset(&idiag, 0, sizeof(idiag));
+	return -EINVAL;
+}
+
 #undef lpfc_debugfs_op_disc_trc
 static const struct file_operations lpfc_debugfs_op_disc_trc = {
 	.owner =        THIS_MODULE,
@@ -1986,6 +2425,26 @@ static const struct file_operations lpfc_idiag_op_queInfo = {
 	.release =      lpfc_idiag_release,
 };
 
+#undef lpfc_idiag_op_queacc
+static const struct file_operations lpfc_idiag_op_queAcc = {
+	.owner =        THIS_MODULE,
+	.open =         lpfc_idiag_open,
+	.llseek =       lpfc_debugfs_lseek,
+	.read =         lpfc_idiag_queacc_read,
+	.write =        lpfc_idiag_queacc_write,
+	.release =      lpfc_idiag_cmd_release,
+};
+
+#undef lpfc_idiag_op_drbacc
+static const struct file_operations lpfc_idiag_op_drbAcc = {
+	.owner =        THIS_MODULE,
+	.open =         lpfc_idiag_open,
+	.llseek =       lpfc_debugfs_lseek,
+	.read =         lpfc_idiag_drbacc_read,
+	.write =        lpfc_idiag_drbacc_write,
+	.release =      lpfc_idiag_cmd_release,
+};
+
 #endif
 
 /**
@@ -2158,7 +2617,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			debugfs_create_dir(name, phba->hba_debugfs_root);
 		if (!vport->vport_debugfs_root) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-					 "0417 Cant create debugfs\n");
+					 "0417 Can't create debugfs\n");
 			goto debug_failed;
 		}
 		atomic_inc(&phba->debugfs_vport_count);
@@ -2211,7 +2670,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 				 vport, &lpfc_debugfs_op_nodelist);
 	if (!vport->debug_nodelist) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-				 "0409 Cant create debugfs nodelist\n");
+				 "0409 Can't create debugfs nodelist\n");
 		goto debug_failed;
 	}
 
@@ -2261,6 +2720,32 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 		}
 	}
 
+	/* iDiag access PCI function queue */
+	snprintf(name, sizeof(name), "queAcc");
+	if (!phba->idiag_que_acc) {
+		phba->idiag_que_acc =
+			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+				phba->idiag_root, phba, &lpfc_idiag_op_queAcc);
+		if (!phba->idiag_que_acc) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+					 "2926 Can't create idiag debugfs\n");
+			goto debug_failed;
+		}
+	}
+
+	/* iDiag access PCI function doorbell registers */
+	snprintf(name, sizeof(name), "drbAcc");
+	if (!phba->idiag_drb_acc) {
+		phba->idiag_drb_acc =
+			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+				phba->idiag_root, phba, &lpfc_idiag_op_drbAcc);
+		if (!phba->idiag_drb_acc) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+					 "2927 Can't create idiag debugfs\n");
+			goto debug_failed;
+		}
+	}
+
 debug_failed:
 	return;
 #endif
@@ -2339,6 +2824,16 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
 		 * iDiag release
 		 */
 		if (phba->sli_rev == LPFC_SLI_REV4) {
+			if (phba->idiag_drb_acc) {
+				/* iDiag drbAcc */
+				debugfs_remove(phba->idiag_drb_acc);
+				phba->idiag_drb_acc = NULL;
+			}
+			if (phba->idiag_que_acc) {
+				/* iDiag queAcc */
+				debugfs_remove(phba->idiag_que_acc);
+				phba->idiag_que_acc = NULL;
+			}
 			if (phba->idiag_que_info) {
 				/* iDiag queInfo */
 				debugfs_remove(phba->idiag_que_info);
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index 91b9a9427cd..6525a5e62d2 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -39,13 +39,42 @@
 /* hbqinfo output buffer size */
 #define LPFC_HBQINFO_SIZE 8192
 
-/* rdPciConf output buffer size */
+/* pciConf */
+#define LPFC_PCI_CFG_BROWSE 0xffff
+#define LPFC_PCI_CFG_RD_CMD_ARG 2
+#define LPFC_PCI_CFG_WR_CMD_ARG 3
 #define LPFC_PCI_CFG_SIZE 4096
 #define LPFC_PCI_CFG_RD_BUF_SIZE (LPFC_PCI_CFG_SIZE/2)
 #define LPFC_PCI_CFG_RD_SIZE (LPFC_PCI_CFG_SIZE/4)
 
-/* queue info output buffer size */
-#define LPFC_QUE_INFO_GET_BUF_SIZE 2048
+/* queue info */
+#define LPFC_QUE_INFO_GET_BUF_SIZE 4096
+
+/* queue acc */
+#define LPFC_QUE_ACC_BROWSE 0xffff
+#define LPFC_QUE_ACC_RD_CMD_ARG 4
+#define LPFC_QUE_ACC_WR_CMD_ARG 6
+#define LPFC_QUE_ACC_BUF_SIZE 4096
+#define LPFC_QUE_ACC_SIZE (LPFC_QUE_ACC_BUF_SIZE/2)
+
+#define LPFC_IDIAG_EQ 1
+#define LPFC_IDIAG_CQ 2
+#define LPFC_IDIAG_MQ 3
+#define LPFC_IDIAG_WQ 4
+#define LPFC_IDIAG_RQ 5
+
+/* doorbell acc */
+#define LPFC_DRB_ACC_ALL 0xffff
+#define LPFC_DRB_ACC_RD_CMD_ARG 1
+#define LPFC_DRB_ACC_WR_CMD_ARG 2
+#define LPFC_DRB_ACC_BUF_SIZE 256
+
+#define LPFC_DRB_EQCQ 1
+#define LPFC_DRB_MQ   2
+#define LPFC_DRB_WQ   3
+#define LPFC_DRB_RQ   4
+
+#define LPFC_DRB_MAX  4
 
 #define SIZE_U8  sizeof(uint8_t)
 #define SIZE_U16 sizeof(uint16_t)
@@ -73,13 +102,23 @@ struct lpfc_idiag_offset {
 	uint32_t last_rd;
 };
 
-#define LPFC_IDIAG_CMD_DATA_SIZE 4
+#define LPFC_IDIAG_CMD_DATA_SIZE 8
 struct lpfc_idiag_cmd {
 	uint32_t opcode;
 #define LPFC_IDIAG_CMD_PCICFG_RD 0x00000001
 #define LPFC_IDIAG_CMD_PCICFG_WR 0x00000002
 #define LPFC_IDIAG_CMD_PCICFG_ST 0x00000003
 #define LPFC_IDIAG_CMD_PCICFG_CL 0x00000004
+
+#define LPFC_IDIAG_CMD_QUEACC_RD 0x00000011
+#define LPFC_IDIAG_CMD_QUEACC_WR 0x00000012
+#define LPFC_IDIAG_CMD_QUEACC_ST 0x00000013
+#define LPFC_IDIAG_CMD_QUEACC_CL 0x00000014
+
+#define LPFC_IDIAG_CMD_DRBACC_RD 0x00000021
+#define LPFC_IDIAG_CMD_DRBACC_WR 0x00000022
+#define LPFC_IDIAG_CMD_DRBACC_ST 0x00000023
+#define LPFC_IDIAG_CMD_DRBACC_CL 0x00000024
 	uint32_t data[LPFC_IDIAG_CMD_DATA_SIZE];
 };
 
@@ -87,6 +126,7 @@ struct lpfc_idiag {
 	uint32_t active;
 	struct lpfc_idiag_cmd cmd;
 	struct lpfc_idiag_offset offset;
+	void *ptr_private;
 };
 #endif
 
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 735028fedda..e2c452467c8 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -102,7 +102,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
 			 phba->pport->port_state);
 
 	/* CLEAR_LA should re-enable link attention events and
-	 * we should then imediately take a LATT event. The
+	 * we should then immediately take a LATT event. The
 	 * LATT processing should call lpfc_linkdown() which
 	 * will cleanup any left over in-progress discovery
 	 * events.
@@ -670,6 +670,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			 * Driver needs to re-reg VPI in order for f/w
 			 * to update the MAC address.
 			 */
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 			lpfc_register_new_vport(phba, vport, ndlp);
 			return 0;
 	}
@@ -869,8 +870,8 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		 */
 		if ((phba->hba_flag & HBA_FIP_SUPPORT) &&
 		    (phba->fcf.fcf_flag & FCF_DISCOVERY) &&
-		    (irsp->ulpStatus != IOSTAT_LOCAL_REJECT) &&
-		    (irsp->un.ulpWord[4] != IOERR_SLI_ABORTED)) {
+		    !((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+		     (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))) {
 			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
 					"2611 FLOGI failed on FCF (x%x), "
 					"status:x%x/x%x, tmo:x%x, perform "
@@ -1085,14 +1086,15 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (sp->cmn.fcphHigh < FC_PH3)
 		sp->cmn.fcphHigh = FC_PH3;
 
-	if  ((phba->sli_rev == LPFC_SLI_REV4) &&
-	     (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
-	      LPFC_SLI_INTF_IF_TYPE_0)) {
-		elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
-		elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
-		/* FLOGI needs to be 3 for WQE FCFI */
-		/* Set the fcfi to the fcfi we registered with */
-		elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+	if  (phba->sli_rev == LPFC_SLI_REV4) {
+		if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_IF_TYPE_0) {
+			elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
+			elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
+			/* FLOGI needs to be 3 for WQE FCFI */
+			/* Set the fcfi to the fcfi we registered with */
+			elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+		}
 	} else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
 		sp->cmn.request_multiple_Nport = 1;
 		/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
@@ -1599,7 +1601,7 @@ out:
  * This routine is the completion callback function for issuing the Port
  * Login (PLOGI) command. For PLOGI completion, there must be an active
  * ndlp on the vport node list that matches the remote node ID from the
- * PLOGI reponse IOCB. If such ndlp does not exist, the PLOGI is simply
+ * PLOGI response IOCB. If such ndlp does not exist, the PLOGI is simply
  * ignored and command IOCB released. The PLOGI response IOCB status is
  * checked for error conditons. If there is error status reported, PLOGI
  * retry shall be attempted by invoking the lpfc_els_retry() routine.
@@ -4107,13 +4109,13 @@ lpfc_els_clear_rrq(struct lpfc_vport *vport,
 	pcmd += sizeof(uint32_t);
 	rrq = (struct RRQ *)pcmd;
 	rrq->rrq_exchg = be32_to_cpu(rrq->rrq_exchg);
-	rxid = be16_to_cpu(bf_get(rrq_rxid, rrq));
+	rxid = bf_get(rrq_rxid, rrq);
 
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 			"2883 Clear RRQ for SID:x%x OXID:x%x RXID:x%x"
 			" x%x x%x\n",
 			be32_to_cpu(bf_get(rrq_did, rrq)),
-			be16_to_cpu(bf_get(rrq_oxid, rrq)),
+			bf_get(rrq_oxid, rrq),
 			rxid,
 			iocb->iotag, iocb->iocb.ulpContext);
 
@@ -4121,7 +4123,7 @@ lpfc_els_clear_rrq(struct lpfc_vport *vport,
 		"Clear RRQ:  did:x%x flg:x%x exchg:x%.08x",
 		ndlp->nlp_DID, ndlp->nlp_flag, rrq->rrq_exchg);
 	if (vport->fc_myDID == be32_to_cpu(bf_get(rrq_did, rrq)))
-		xri = be16_to_cpu(bf_get(rrq_oxid, rrq));
+		xri = bf_get(rrq_oxid, rrq);
 	else
 		xri = rxid;
 	prrq = lpfc_get_active_rrq(vport, xri, ndlp->nlp_DID);
@@ -7290,8 +7292,9 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	struct lpfc_vport *vport = cmdiocb->vport;
 	IOCB_t *irsp;
 	struct lpfc_nodelist *ndlp;
-	ndlp = (struct lpfc_nodelist *)cmdiocb->context1;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
+	ndlp = (struct lpfc_nodelist *)cmdiocb->context1;
 	irsp = &rspiocb->iocb;
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
 		"LOGO npiv cmpl:  status:x%x/x%x did:x%x",
@@ -7302,6 +7305,19 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
 	/* Trigger the release of the ndlp after logo */
 	lpfc_nlp_put(ndlp);
+
+	/* NPIV LOGO completes to NPort <nlp_DID> */
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			 "2928 NPIV LOGO completes to NPort x%x "
+			 "Data: x%x x%x x%x x%x\n",
+			 ndlp->nlp_DID, irsp->ulpStatus, irsp->un.ulpWord[4],
+			 irsp->ulpTimeout, vport->num_disc_nodes);
+
+	if (irsp->ulpStatus == IOSTAT_SUCCESS) {
+		spin_lock_irq(shost->host_lock);
+		vport->fc_flag &= ~FC_FABRIC;
+		spin_unlock_irq(shost->host_lock);
+	}
 }
 
 /**
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 154c715fb3a..7a35df5e203 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -739,7 +739,7 @@ lpfc_do_work(void *p)
 
 /*
  * This is only called to handle FC worker events. Since this a rare
- * occurance, we allocate a struct lpfc_work_evt structure here instead of
+ * occurrence, we allocate a struct lpfc_work_evt structure here instead of
  * embedding it in the IOCB.
  */
 int
@@ -1348,7 +1348,7 @@ lpfc_register_fcf(struct lpfc_hba *phba)
 	int rc;
 
 	spin_lock_irq(&phba->hbalock);
-	/* If the FCF is not availabe do nothing. */
+	/* If the FCF is not available do nothing. */
 	if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
 		phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
 		spin_unlock_irq(&phba->hbalock);
@@ -1538,7 +1538,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 
 		/*
 		 * If user did not specify any addressing mode, or if the
-		 * prefered addressing mode specified by user is not supported
+		 * preferred addressing mode specified by user is not supported
 		 * by FCF, allow fabric to pick the addressing mode.
 		 */
 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
@@ -1553,7 +1553,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 				FCFCNCT_AM_SPMA) ?
 				LPFC_FCF_SPMA : LPFC_FCF_FPMA;
 		/*
-		 * If the user specified a prefered address mode, use the
+		 * If the user specified a preferred address mode, use the
 		 * addr mode only if FCF support the addr_mode.
 		 */
 		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
@@ -3117,7 +3117,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		 * back at reg login state so this
 		 * mbox needs to be ignored becase
 		 * there is another reg login in
-		 * proccess.
+		 * process.
 		 */
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
@@ -3569,6 +3569,10 @@ lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 		"rport add:       did:x%x flg:x%x type x%x",
 		ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
 
+	/* Don't add the remote port if unloading. */
+	if (vport->load_flag & FC_UNLOADING)
+		return;
+
 	ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids);
 	if (!rport || !get_device(&rport->dev)) {
 		dev_printk(KERN_WARNING, &phba->pcidev->dev,
@@ -4477,7 +4481,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
 	if ((vport->fc_flag & FC_RSCN_MODE) &&
 	    !(vport->fc_flag & FC_NDISC_ACTIVE)) {
 		if (lpfc_rscn_payload_check(vport, did)) {
-			/* If we've already recieved a PLOGI from this NPort
+			/* If we've already received a PLOGI from this NPort
 			 * we don't need to try to discover it again.
 			 */
 			if (ndlp->nlp_flag & NLP_RCV_PLOGI)
@@ -4493,7 +4497,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
 		} else
 			ndlp = NULL;
 	} else {
-		/* If we've already recieved a PLOGI from this NPort,
+		/* If we've already received a PLOGI from this NPort,
 		 * or we are already in the process of discovery on it,
 		 * we don't need to try to discover it again.
 		 */
@@ -5756,7 +5760,7 @@ lpfc_read_fcoe_param(struct lpfc_hba *phba,
  * @size: Size of the data buffer.
  * @rec_type: Record type to be searched.
  *
- * This function searches config region data to find the begining
+ * This function searches config region data to find the beginning
  * of the record specified by record_type. If record found, this
  * function return pointer to the record else return NULL.
  */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 8433ac0d9fb..4dff668ebda 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1059,6 +1059,11 @@ struct rq_context {
 #define lpfc_rq_context_rqe_size_SHIFT	8		/* Version 1 Only */
 #define lpfc_rq_context_rqe_size_MASK	0x0000000F
 #define lpfc_rq_context_rqe_size_WORD	word0
+#define LPFC_RQE_SIZE_8		2
+#define LPFC_RQE_SIZE_16	3
+#define LPFC_RQE_SIZE_32	4
+#define LPFC_RQE_SIZE_64	5
+#define LPFC_RQE_SIZE_128	6
 #define lpfc_rq_context_page_size_SHIFT	0		/* Version 1 Only */
 #define lpfc_rq_context_page_size_MASK	0x000000FF
 #define lpfc_rq_context_page_size_WORD	word0
@@ -2108,6 +2113,8 @@ struct lpfc_mbx_pc_sli4_params {
 #define sgl_pp_align_WORD			word12
 	uint32_t rsvd_13_63[51];
 };
+#define SLI4_PAGE_ALIGN(addr) (((addr)+((SLI4_PAGE_SIZE)-1)) \
+			       &(~((SLI4_PAGE_SIZE)-1)))
 
 struct lpfc_sli4_parameters {
 	uint32_t word0;
@@ -2491,6 +2498,9 @@ struct wqe_common {
 #define wqe_reqtag_SHIFT      0
 #define wqe_reqtag_MASK       0x0000FFFF
 #define wqe_reqtag_WORD       word9
+#define wqe_temp_rpi_SHIFT    16
+#define wqe_temp_rpi_MASK     0x0000FFFF
+#define wqe_temp_rpi_WORD     word9
 #define wqe_rcvoxid_SHIFT     16
 #define wqe_rcvoxid_MASK      0x0000FFFF
 #define wqe_rcvoxid_WORD      word9
@@ -2524,7 +2534,7 @@ struct wqe_common {
 #define wqe_wqes_WORD         word10
 /* Note that this field overlaps above fields */
 #define wqe_wqid_SHIFT        1
-#define wqe_wqid_MASK         0x0000007f
+#define wqe_wqid_MASK         0x00007fff
 #define wqe_wqid_WORD         word10
 #define wqe_pri_SHIFT         16
 #define wqe_pri_MASK          0x00000007
@@ -2621,7 +2631,11 @@ struct xmit_els_rsp64_wqe {
 	uint32_t rsvd4;
 	struct wqe_did wqe_dest;
 	struct wqe_common wqe_com; /* words 6-11 */
-	uint32_t rsvd_12_15[4];
+	uint32_t word12;
+#define wqe_rsp_temp_rpi_SHIFT    0
+#define wqe_rsp_temp_rpi_MASK     0x0000FFFF
+#define wqe_rsp_temp_rpi_WORD     word12
+	uint32_t rsvd_13_15[3];
 };
 
 struct xmit_bls_rsp64_wqe {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e6ebe516cfb..7dda036a1af 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3209,9 +3209,9 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
 	phba->sli4_hba.link_state.logical_speed =
 			bf_get(lpfc_acqe_logical_link_speed, acqe_link);
 	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
-			"2900 Async FCoE Link event - Speed:%dGBit duplex:x%x "
-			"LA Type:x%x Port Type:%d Port Number:%d Logical "
-			"speed:%dMbps Fault:%d\n",
+			"2900 Async FC/FCoE Link event - Speed:%dGBit "
+			"duplex:x%x LA Type:x%x Port Type:%d Port Number:%d "
+			"Logical speed:%dMbps Fault:%d\n",
 			phba->sli4_hba.link_state.speed,
 			phba->sli4_hba.link_state.topology,
 			phba->sli4_hba.link_state.status,
@@ -4466,7 +4466,7 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * lpfc_init_api_table_setup - Set up init api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -4850,7 +4850,7 @@ out_free_mem:
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -4906,6 +4906,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
 	uint16_t rpi_limit, curr_rpi_range;
 	struct lpfc_dmabuf *dmabuf;
 	struct lpfc_rpi_hdr *rpi_hdr;
+	uint32_t rpi_count;
 
 	rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
 		    phba->sli4_hba.max_cfg_param.max_rpi - 1;
@@ -4920,7 +4921,9 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
 	 * and to allow the full max_rpi range per port.
 	 */
 	if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
-		return NULL;
+		rpi_count = rpi_limit - curr_rpi_range;
+	else
+		rpi_count = LPFC_RPI_HDR_COUNT;
 
 	/*
 	 * First allocate the protocol header region for the port.  The
@@ -4961,7 +4964,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
 	 * The next_rpi stores the next module-64 rpi value to post
 	 * in any subsequent rpi memory region postings.
 	 */
-	phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+	phba->sli4_hba.next_rpi += rpi_count;
 	spin_unlock_irq(&phba->hbalock);
 	return rpi_hdr;
 
@@ -5730,7 +5733,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -5835,7 +5838,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
  *
  * Return codes
  * 	0 - successful
- * 	-ENOMEM - No availble memory
+ * 	-ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -5894,7 +5897,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -6189,7 +6192,7 @@ out_error:
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static void
@@ -6253,7 +6256,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -6498,7 +6501,7 @@ out_error:
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 void
@@ -6543,7 +6546,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  **/
 static int
 lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
@@ -6704,7 +6707,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -7004,7 +7007,8 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
 		lpfc_sli4_bar0_register_memmap(phba, if_type);
 	}
 
-	if (pci_resource_start(pdev, 2)) {
+	if ((if_type == LPFC_SLI_INTF_IF_TYPE_0) &&
+	    (pci_resource_start(pdev, 2))) {
 		/*
 		 * Map SLI4 if type 0 HBA Control Register base to a kernel
 		 * virtual address and setup the registers.
@@ -7021,7 +7025,8 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
 		lpfc_sli4_bar1_register_memmap(phba);
 	}
 
-	if (pci_resource_start(pdev, 4)) {
+	if ((if_type == LPFC_SLI_INTF_IF_TYPE_0) &&
+	    (pci_resource_start(pdev, 4))) {
 		/*
 		 * Map SLI4 if type 0 HBA Doorbell Register base to a kernel
 		 * virtual address and setup the registers.
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index dba32dfdb59..e6ce9033f85 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1736,7 +1736,7 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
 	}
 
 	/* Setup for the none-embedded mbox command */
-	pcount = (PAGE_ALIGN(length))/SLI4_PAGE_SIZE;
+	pcount = (SLI4_PAGE_ALIGN(length))/SLI4_PAGE_SIZE;
 	pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
 				LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
 	/* Allocate record for keeping SGE virtual addresses */
@@ -1834,7 +1834,7 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * @fcf_index: index to fcf table.
  *
  * This routine routine allocates and constructs non-embedded mailbox command
- * for reading a FCF table entry refered by @fcf_index.
+ * for reading a FCF table entry referred by @fcf_index.
  *
  * Return: pointer to the mailbox command constructed if successful, otherwise
  * NULL.
diff --git a/drivers/scsi/lpfc/lpfc_nl.h b/drivers/scsi/lpfc/lpfc_nl.h
index f3cfbe2ce98..f2b1bbcb196 100644
--- a/drivers/scsi/lpfc/lpfc_nl.h
+++ b/drivers/scsi/lpfc/lpfc_nl.h
@@ -50,7 +50,7 @@
  * and subcategory. The event type must come first.
  * The subcategory further defines the data that follows in the rest
  * of the payload. Each category will have its own unique header plus
- * any addtional data unique to the subcategory.
+ * any additional data unique to the subcategory.
  * The payload sent via the fc transport is one-way driver->application.
  */
 
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 52b35159fc3..0d92d4205ea 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -658,7 +658,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	return 0;
 }
 /**
- * lpfc_release_rpi - Release a RPI by issueing unreg_login mailbox cmd.
+ * lpfc_release_rpi - Release a RPI by issuing unreg_login mailbox cmd.
  * @phba : Pointer to lpfc_hba structure.
  * @vport: Pointer to lpfc_vport structure.
  * @rpi  : rpi to be release.
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 2b962b020cf..84e4481b240 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -577,7 +577,7 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
 			iocb->un.fcpi64.bdl.addrHigh = 0;
 			iocb->ulpBdeCount = 0;
 			iocb->ulpLe = 0;
-			/* fill in responce BDE */
+			/* fill in response BDE */
 			iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
 							BUFF_TYPE_BDE_64;
 			iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
@@ -1217,10 +1217,10 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 				     (2 * sizeof(struct ulp_bde64)));
 			data_bde->addrHigh = putPaddrHigh(physaddr);
 			data_bde->addrLow = putPaddrLow(physaddr);
-			/* ebde count includes the responce bde and data bpl */
+			/* ebde count includes the response bde and data bpl */
 			iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
 		} else {
-			/* ebde count includes the responce bde and data bdes */
+			/* ebde count includes the response bde and data bdes */
 			iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
 		}
 	} else {
@@ -2380,7 +2380,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 		}
 		/*
 		 * The cmnd->underflow is the minimum number of bytes that must
-		 * be transfered for this command.  Provided a sense condition
+		 * be transferred for this command.  Provided a sense condition
 		 * is not present, make sure the actual amount transferred is at
 		 * least the underflow value or fail.
 		 */
@@ -2873,7 +2873,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * lpfc_scsi_api_table_setup - Set up scsi api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -3238,9 +3238,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	if (!lpfc_cmd) {
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			 "2873 SCSI Layer I/O Abort Request IO CMPL Status "
-			 "x%x ID %d "
-			 "LUN %d snum %#lx\n", ret, cmnd->device->id,
-			 cmnd->device->lun, cmnd->serial_number);
+			 "x%x ID %d LUN %d\n",
+			 ret, cmnd->device->id, cmnd->device->lun);
 		return SUCCESS;
 	}
 
@@ -3318,16 +3317,15 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
 				 "0748 abort handler timed out waiting "
 				 "for abort to complete: ret %#x, ID %d, "
-				 "LUN %d, snum %#lx\n",
-				 ret, cmnd->device->id, cmnd->device->lun,
-				 cmnd->serial_number);
+				 "LUN %d\n",
+				 ret, cmnd->device->id, cmnd->device->lun);
 	}
 
  out:
 	lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			 "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
-			 "LUN %d snum %#lx\n", ret, cmnd->device->id,
-			 cmnd->device->lun, cmnd->serial_number);
+			 "LUN %d\n", ret, cmnd->device->id,
+			 cmnd->device->lun);
 	return ret;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 5932273870a..ce645b20a6a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -130,7 +130,7 @@ struct lpfc_scsi_buf {
 	dma_addr_t nonsg_phys;	/* Non scatter-gather physical address. */
 
 	/*
-	 * data and dma_handle are the kernel virutal and bus address of the
+	 * data and dma_handle are the kernel virtual and bus address of the
 	 * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter
 	 * gather bde list that supports the sg_tablesize value.
 	 */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4746dcd756d..837d272cb2d 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -2817,7 +2817,7 @@ void lpfc_poll_eratt(unsigned long ptr)
  * This function is called from the interrupt context when there is a ring
  * event for the fcp ring. The caller does not hold any lock.
  * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
+ * finds an iocb with LE bit set and chains all the iocbs up to the iocb with
  * LE bit set. The function will call the completion handler of the command iocb
  * if the response iocb indicates a completion for a command iocb or it is
  * an abort completion. The function will call lpfc_sli_process_unsol_iocb
@@ -4769,8 +4769,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	else
 		phba->hba_flag &= ~HBA_FIP_SUPPORT;
 
-	if (phba->sli_rev != LPFC_SLI_REV4 ||
-	    !(phba->hba_flag & HBA_FCOE_MODE)) {
+	if (phba->sli_rev != LPFC_SLI_REV4) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 			"0376 READ_REV Error. SLI Level %d "
 			"FCoE enabled %d\n",
@@ -5018,10 +5017,11 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		lpfc_reg_fcfi(phba, mboxq);
 		mboxq->vport = phba->pport;
 		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-		if (rc == MBX_SUCCESS)
-			rc = 0;
-		else
+		if (rc != MBX_SUCCESS)
 			goto out_unset_queue;
+		rc = 0;
+		phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi,
+					&mboxq->u.mqe.un.reg_fcfi);
 	}
 	/*
 	 * The port is ready, set the host's link state to LINK_DOWN
@@ -5117,7 +5117,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 
 	/* Setting state unknown so lpfc_sli_abort_iocb_ring
 	 * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
-	 * it to fail all oustanding SCSI IO.
+	 * it to fail all outstanding SCSI IO.
 	 */
 	spin_lock_irq(&phba->pport->work_port_lock);
 	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
@@ -6031,7 +6031,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 }
 
 /**
- * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * lpfc_mbox_api_table_setup - Set up mbox api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -6402,6 +6402,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 	uint32_t els_id = LPFC_ELS_ID_DEFAULT;
 	int numBdes, i;
 	struct ulp_bde64 bde;
+	struct lpfc_nodelist *ndlp;
 
 	fip = phba->hba_flag & HBA_FIP_SUPPORT;
 	/* The fcp commands will set command type */
@@ -6447,6 +6448,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 
 	switch (iocbq->iocb.ulpCommand) {
 	case CMD_ELS_REQUEST64_CR:
+		ndlp = (struct lpfc_nodelist *)iocbq->context1;
 		if (!iocbq->iocb.ulpLe) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 				"2007 Only Limited Edition cmd Format"
@@ -6472,6 +6474,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 			els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK)
 					>> LPFC_FIP_ELS_ID_SHIFT);
 		}
+		bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, ndlp->nlp_rpi);
 		bf_set(wqe_els_id, &wqe->els_req.wqe_com, els_id);
 		bf_set(wqe_dbde, &wqe->els_req.wqe_com, 1);
 		bf_set(wqe_iod, &wqe->els_req.wqe_com, LPFC_WQE_IOD_READ);
@@ -6604,6 +6607,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		command_type = OTHER_COMMAND;
 	break;
 	case CMD_XMIT_ELS_RSP64_CX:
+		ndlp = (struct lpfc_nodelist *)iocbq->context1;
 		/* words0-2 BDE memcpy */
 		/* word3 iocb=iotag32 wqe=response_payload_len */
 		wqe->xmit_els_rsp.response_payload_len = xmit_len;
@@ -6626,6 +6630,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		bf_set(wqe_lenloc, &wqe->xmit_els_rsp.wqe_com,
 		       LPFC_WQE_LENLOC_WORD3);
 		bf_set(wqe_ebde_cnt, &wqe->xmit_els_rsp.wqe_com, 0);
+		bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, ndlp->nlp_rpi);
 		command_type = OTHER_COMMAND;
 	break;
 	case CMD_CLOSE_XRI_CN:
@@ -6847,7 +6852,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
 }
 
 /**
- * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * lpfc_sli_api_table_setup - Set up sli api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -7521,7 +7526,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	struct lpfc_dmabuf *mp, *next_mp;
 	struct list_head *slp = &pring->postbufq;
 
-	/* Search postbufq, from the begining, looking for a match on tag */
+	/* Search postbufq, from the beginning, looking for a match on tag */
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
 		if (mp->buffer_tag == tag) {
@@ -7565,7 +7570,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	struct lpfc_dmabuf *mp, *next_mp;
 	struct list_head *slp = &pring->postbufq;
 
-	/* Search postbufq, from the begining, looking for a match on phys */
+	/* Search postbufq, from the beginning, looking for a match on phys */
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
 		if (mp->phys == phys) {
@@ -8438,7 +8443,7 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
  * for possible error attention events. The caller must hold the hostlock
  * with spin_lock_irq().
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 static int
@@ -8491,7 +8496,7 @@ unplug_err:
  * for possible error attention events. The caller must hold the hostlock
  * with spin_lock_irq().
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 static int
@@ -8581,7 +8586,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
  * This function is called from timer soft interrupt context to check HBA's
  * error attention register bit for error attention events.
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 int
@@ -9684,7 +9689,7 @@ out:
  * @cq: Pointer to the completion queue.
  * @wcqe: Pointer to a completion queue entry.
  *
- * This routine process a slow-path work-queue or recieve queue completion queue
+ * This routine process a slow-path work-queue or receive queue completion queue
  * entry.
  *
  * Return: true if work posted to worker thread, otherwise false.
@@ -10522,8 +10527,8 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
 	bf_set(lpfc_mbox_hdr_version, &shdr->request,
 	       phba->sli4_hba.pc_sli4_params.cqv);
 	if (phba->sli4_hba.pc_sli4_params.cqv == LPFC_Q_CREATE_VERSION_2) {
-		bf_set(lpfc_mbx_cq_create_page_size, &cq_create->u.request,
-		       (PAGE_SIZE/SLI4_PAGE_SIZE));
+		/* FW only supports 1. Should be PAGE_SIZE/SLI4_PAGE_SIZE */
+		bf_set(lpfc_mbx_cq_create_page_size, &cq_create->u.request, 1);
 		bf_set(lpfc_cq_eq_id_2, &cq_create->u.request.context,
 		       eq->queue_id);
 	} else {
@@ -10967,6 +10972,12 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 		       &rq_create->u.request.context,
 		       hrq->entry_count);
 		rq_create->u.request.context.buffer_size = LPFC_HDR_BUF_SIZE;
+		bf_set(lpfc_rq_context_rqe_size,
+		       &rq_create->u.request.context,
+		       LPFC_RQE_SIZE_8);
+		bf_set(lpfc_rq_context_page_size,
+		       &rq_create->u.request.context,
+		       (PAGE_SIZE/SLI4_PAGE_SIZE));
 	} else {
 		switch (hrq->entry_count) {
 		default:
@@ -11042,9 +11053,12 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 	       phba->sli4_hba.pc_sli4_params.rqv);
 	if (phba->sli4_hba.pc_sli4_params.rqv == LPFC_Q_CREATE_VERSION_1) {
 		bf_set(lpfc_rq_context_rqe_count_1,
-		       &rq_create->u.request.context,
-		       hrq->entry_count);
+		       &rq_create->u.request.context, hrq->entry_count);
 		rq_create->u.request.context.buffer_size = LPFC_DATA_BUF_SIZE;
+		bf_set(lpfc_rq_context_rqe_size, &rq_create->u.request.context,
+		       LPFC_RQE_SIZE_8);
+		bf_set(lpfc_rq_context_page_size, &rq_create->u.request.context,
+		       (PAGE_SIZE/SLI4_PAGE_SIZE));
 	} else {
 		switch (drq->entry_count) {
 		default:
@@ -12971,7 +12985,7 @@ lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
  * record and processing it one at a time starting from the @fcf_index
  * for initial FCF discovery or fast FCF failover rediscovery.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
@@ -13032,7 +13046,7 @@ fail_fcf_scan:
  * This routine is invoked to read an FCF record indicated by @fcf_index
  * and to use it for FLOGI roundrobin FCF failover.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
@@ -13078,7 +13092,7 @@ fail_fcf_read:
  * This routine is invoked to read an FCF record indicated by @fcf_index to
  * determine whether it's eligible for FLOGI roundrobin failover list.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 2404d1d6556..c03921b1232 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.22"
+#define LPFC_DRIVER_VERSION "8.3.23"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index c212694a971..5c1776406c9 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -284,7 +284,7 @@ mega_query_adapter(adapter_t *adapter)
 
 	adapter->host->max_id = 16;	/* max targets per channel */
 
-	adapter->host->max_lun = 7;	/* Upto 7 luns for non disk devices */
+	adapter->host->max_lun = 7;	/* Up to 7 luns for non disk devices */
 
 	adapter->host->cmd_per_lun = max_cmd_per_lun;
 
@@ -1469,8 +1469,8 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
 			if( scb->state & SCB_ABORT ) {
 
 				printk(KERN_WARNING
-				"megaraid: aborted cmd %lx[%x] complete.\n",
-					scb->cmd->serial_number, scb->idx);
+				"megaraid: aborted cmd [%x] complete.\n",
+					scb->idx);
 
 				scb->cmd->result = (DID_ABORT << 16);
 
@@ -1488,8 +1488,8 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
 			if( scb->state & SCB_RESET ) {
 
 				printk(KERN_WARNING
-				"megaraid: reset cmd %lx[%x] complete.\n",
-					scb->cmd->serial_number, scb->idx);
+				"megaraid: reset cmd [%x] complete.\n",
+					scb->idx);
 
 				scb->cmd->result = (DID_RESET << 16);
 
@@ -1958,8 +1958,8 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
 	struct list_head	*pos, *next;
 	scb_t			*scb;
 
-	printk(KERN_WARNING "megaraid: %s-%lx cmd=%x <c=%d t=%d l=%d>\n",
-	     (aor == SCB_ABORT)? "ABORTING":"RESET", cmd->serial_number,
+	printk(KERN_WARNING "megaraid: %s cmd=%x <c=%d t=%d l=%d>\n",
+	     (aor == SCB_ABORT)? "ABORTING":"RESET",
 	     cmd->cmnd[0], cmd->device->channel, 
 	     cmd->device->id, cmd->device->lun);
 
@@ -1983,9 +1983,9 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
 			if( scb->state & SCB_ISSUED ) {
 
 				printk(KERN_WARNING
-					"megaraid: %s-%lx[%x], fw owner.\n",
+					"megaraid: %s[%x], fw owner.\n",
 					(aor==SCB_ABORT) ? "ABORTING":"RESET",
-					cmd->serial_number, scb->idx);
+					scb->idx);
 
 				return FALSE;
 			}
@@ -1996,9 +1996,9 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
 				 * list
 				 */
 				printk(KERN_WARNING
-					"megaraid: %s-%lx[%x], driver owner.\n",
+					"megaraid: %s-[%x], driver owner.\n",
 					(aor==SCB_ABORT) ? "ABORTING":"RESET",
-					cmd->serial_number, scb->idx);
+					scb->idx);
 
 				mega_free_scb(adapter, scb);
 
@@ -3734,7 +3734,7 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
 	 * check is the application conforms to NIT. We do not have to do much
 	 * in that case.
 	 * We exploit the fact that the signature is stored in the very
-	 * begining of the structure.
+	 * beginning of the structure.
 	 */
 
 	if( copy_from_user(signature, arg, 7) )
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 853411911b2..9a7897f8ca4 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -532,9 +532,9 @@ struct uioctl_t {
 
 /*
  * struct mcontroller is used to pass information about the controllers in the
- * system. Its upto the application how to use the information. We are passing
+ * system. Its up to the application how to use the information. We are passing
  * as much info about the cards as possible and useful. Before issuing the
- * call to find information about the cards, the applicaiton needs to issue a
+ * call to find information about the cards, the application needs to issue a
  * ioctl first to find out the number of controllers in the system.
  */
 #define MAX_CONTROLLERS 32
@@ -804,7 +804,7 @@ typedef struct {
 	unsigned long		base;
 	void __iomem		*mmio_base;
 
-	/* mbox64 with mbox not aligned on 16-byte boundry */
+	/* mbox64 with mbox not aligned on 16-byte boundary */
 	mbox64_t	*una_mbox64;
 	dma_addr_t	una_mbox64_dma;
 
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index ce2487a888e..e01c6f7c2ca 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -660,7 +660,7 @@ typedef struct {
  * @lparam	: logical drives parameters
  * @span	: span
  *
- * 8-LD logical drive with upto 8 spans
+ * 8-LD logical drive with up to 8 spans
  */
 typedef struct {
 	logdrv_param_t	lparam;
@@ -673,7 +673,7 @@ typedef struct {
  * @lparam	: logical drives parameters
  * @span	: span
  *
- * 8-LD logical drive with upto 4 spans
+ * 8-LD logical drive with up to 4 spans
  */
 typedef struct {
 	logdrv_param_t	lparam;
@@ -720,7 +720,7 @@ typedef struct {
  * @ldrv	: logical drives information
  * @pdrv	: physical drives information
  *
- * Disk array for 8LD logical drives with upto 8 spans
+ * Disk array for 8LD logical drives with up to 8 spans
  */
 typedef struct {
 	uint8_t			numldrv;
@@ -737,7 +737,7 @@ typedef struct {
  * @ldrv	: logical drives information
  * @pdrv	: physical drives information
  *
- * Disk array for 8LD logical drives with upto 4 spans
+ * Disk array for 8LD logical drives with up to 4 spans
  */
 typedef struct {
 	uint8_t			numldrv;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 5708cb27d07..2e6619eff3e 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -2315,8 +2315,8 @@ megaraid_mbox_dpc(unsigned long devp)
 		// Was an abort issued for this command earlier
 		if (scb->state & SCB_ABORT) {
 			con_log(CL_ANN, (KERN_NOTICE
-			"megaraid: aborted cmd %lx[%x] completed\n",
-				scp->serial_number, scb->sno));
+			"megaraid: aborted cmd [%x] completed\n",
+				scb->sno));
 		}
 
 		/*
@@ -2472,8 +2472,8 @@ megaraid_abort_handler(struct scsi_cmnd *scp)
 	raid_dev	= ADAP2RAIDDEV(adapter);
 
 	con_log(CL_ANN, (KERN_WARNING
-		"megaraid: aborting-%ld cmd=%x <c=%d t=%d l=%d>\n",
-		scp->serial_number, scp->cmnd[0], SCP2CHANNEL(scp),
+		"megaraid: aborting cmd=%x <c=%d t=%d l=%d>\n",
+		scp->cmnd[0], SCP2CHANNEL(scp),
 		SCP2TARGET(scp), SCP2LUN(scp)));
 
 	// If FW has stopped responding, simply return failure
@@ -2496,9 +2496,8 @@ megaraid_abort_handler(struct scsi_cmnd *scp)
 			list_del_init(&scb->list);	// from completed list
 
 			con_log(CL_ANN, (KERN_WARNING
-			"megaraid: %ld:%d[%d:%d], abort from completed list\n",
-				scp->serial_number, scb->sno,
-				scb->dev_channel, scb->dev_target));
+			"megaraid: %d[%d:%d], abort from completed list\n",
+				scb->sno, scb->dev_channel, scb->dev_target));
 
 			scp->result = (DID_ABORT << 16);
 			scp->scsi_done(scp);
@@ -2527,9 +2526,8 @@ megaraid_abort_handler(struct scsi_cmnd *scp)
 			ASSERT(!(scb->state & SCB_ISSUED));
 
 			con_log(CL_ANN, (KERN_WARNING
-				"megaraid abort: %ld[%d:%d], driver owner\n",
-				scp->serial_number, scb->dev_channel,
-				scb->dev_target));
+				"megaraid abort: [%d:%d], driver owner\n",
+				scb->dev_channel, scb->dev_target));
 
 			scp->result = (DID_ABORT << 16);
 			scp->scsi_done(scp);
@@ -2560,25 +2558,21 @@ megaraid_abort_handler(struct scsi_cmnd *scp)
 
 			if (!(scb->state & SCB_ISSUED)) {
 				con_log(CL_ANN, (KERN_WARNING
-				"megaraid abort: %ld%d[%d:%d], invalid state\n",
-				scp->serial_number, scb->sno, scb->dev_channel,
-				scb->dev_target));
+				"megaraid abort: %d[%d:%d], invalid state\n",
+				scb->sno, scb->dev_channel, scb->dev_target));
 				BUG();
 			}
 			else {
 				con_log(CL_ANN, (KERN_WARNING
-				"megaraid abort: %ld:%d[%d:%d], fw owner\n",
-				scp->serial_number, scb->sno, scb->dev_channel,
-				scb->dev_target));
+				"megaraid abort: %d[%d:%d], fw owner\n",
+				scb->sno, scb->dev_channel, scb->dev_target));
 			}
 		}
 	}
 	spin_unlock_irq(&adapter->lock);
 
 	if (!found) {
-		con_log(CL_ANN, (KERN_WARNING
-			"megaraid abort: scsi cmd:%ld, do now own\n",
-			scp->serial_number));
+		con_log(CL_ANN, (KERN_WARNING "megaraid abort: do now own\n"));
 
 		// FIXME: Should there be a callback for this command?
 		return SUCCESS;
@@ -2649,9 +2643,8 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 		} else {
 			if (scb->scp == scp) {	// Found command
 				con_log(CL_ANN, (KERN_WARNING
-					"megaraid: %ld:%d[%d:%d], reset from pending list\n",
-					scp->serial_number, scb->sno,
-					scb->dev_channel, scb->dev_target));
+					"megaraid: %d[%d:%d], reset from pending list\n",
+					scb->sno, scb->dev_channel, scb->dev_target));
 			} else {
 				con_log(CL_ANN, (KERN_WARNING
 				"megaraid: IO packet with %d[%d:%d] being reset\n",
@@ -2689,7 +2682,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 				(MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
 		}
 
-		// bailout if no recovery happended in reset time
+		// bailout if no recovery happened in reset time
 		if (adapter->outstanding_cmds == 0) {
 			break;
 		}
@@ -3452,7 +3445,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
  * megaraid_mbox_setup_device_map - manage device ids
  * @adapter	: Driver's soft state
  *
- * Manange the device ids to have an appropraite mapping between the kernel
+ * Manange the device ids to have an appropriate mapping between the kernel
  * scsi addresses and megaraid scsi and logical drive addresses. We export
  * scsi devices on their actual addresses, whereas the logical drives are
  * exported on a virtual scsi channel.
@@ -3973,7 +3966,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data)
  * NOTE: The commands issuance functionality is not generalized and
  * implemented in context of "get ld map" command only. If required, the
  * command issuance logical can be trivially pulled out and implemented as a
- * standalone libary. For now, this should suffice since there is no other
+ * standalone library. For now, this should suffice since there is no other
  * user of this interface.
  *
  * Return 0 on success.
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 635b228c3ea..046dcc672ec 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1347,7 +1347,7 @@ struct megasas_instance {
 	struct timer_list io_completion_timer;
 	struct list_head internal_reset_pending_q;
 
-	/* Ptr to hba specfic information */
+	/* Ptr to hba specific information */
 	void *ctrl_context;
 	u8	msi_flag;
 	struct msix_entry msixentry;
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index bbd10c81fd9..89c623ebadb 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1698,7 +1698,7 @@ void megasas_do_ocr(struct megasas_instance *instance)
  * megasas_wait_for_outstanding -	Wait for all outstanding cmds
  * @instance:				Adapter soft state
  *
- * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to
+ * This function waits for up to MEGASAS_RESET_WAIT_TIME seconds for FW to
  * complete all its outstanding commands. Returns error if one or more IOs
  * are pending after this time period. It also marks the controller dead.
  */
@@ -1751,10 +1751,9 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance)
 			list_del_init(&reset_cmd->list);
 			if (reset_cmd->scmd) {
 				reset_cmd->scmd->result = DID_RESET << 16;
-				printk(KERN_NOTICE "%d:%p reset [%02x], %#lx\n",
+				printk(KERN_NOTICE "%d:%p reset [%02x]\n",
 					reset_index, reset_cmd,
-					reset_cmd->scmd->cmnd[0],
-					reset_cmd->scmd->serial_number);
+					reset_cmd->scmd->cmnd[0]);
 
 				reset_cmd->scmd->scsi_done(reset_cmd->scmd);
 				megasas_return_cmd(instance, reset_cmd);
@@ -1879,8 +1878,8 @@ static int megasas_generic_reset(struct scsi_cmnd *scmd)
 
 	instance = (struct megasas_instance *)scmd->device->host->hostdata;
 
-	scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n",
-		 scmd->serial_number, scmd->cmnd[0], scmd->retries);
+	scmd_printk(KERN_NOTICE, scmd, "megasas: RESET cmd=%x retries=%x\n",
+		 scmd->cmnd[0], scmd->retries);
 
 	if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
 		printk(KERN_ERR "megasas: cannot recover from previous reset "
@@ -2349,9 +2348,9 @@ megasas_issue_pending_cmds_again(struct megasas_instance *instance)
 							cmd->frame_phys_addr ,
 							0, instance->reg_set);
 		} else if (cmd->scmd) {
-			printk(KERN_NOTICE "megasas: %p scsi cmd [%02x],%#lx"
+			printk(KERN_NOTICE "megasas: %p scsi cmd [%02x]"
 			"detected on the internal queue, issue again.\n",
-			cmd, cmd->scmd->cmnd[0], cmd->scmd->serial_number);
+			cmd, cmd->scmd->cmnd[0]);
 
 			atomic_inc(&instance->fw_outstanding);
 			instance->instancet->fire_cmd(instance,
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index 197aa1b3f0f..49447477953 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -415,8 +415,7 @@ static void mesh_start_cmd(struct mesh_state *ms, struct scsi_cmnd *cmd)
 #if 1
 	if (DEBUG_TARGET(cmd)) {
 		int i;
-		printk(KERN_DEBUG "mesh_start: %p ser=%lu tgt=%d cmd=",
-		       cmd, cmd->serial_number, id);
+		printk(KERN_DEBUG "mesh_start: %p tgt=%d cmd=", cmd, id);
 		for (i = 0; i < cmd->cmd_len; ++i)
 			printk(" %x", cmd->cmnd[i]);
 		printk(" use_sg=%d buffer=%p bufflen=%u\n",
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
index 20e6b886934..165454d5259 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
@@ -21,7 +21,7 @@
  *  05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
  *  10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
  *                      Control field Task Attribute flags.
- *                      Moved LUN field defines to mpi2.h becasue they are
+ *                      Moved LUN field defines to mpi2.h because they are
  *                      common to many structures.
  *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
  *                      Query Asynchronous Event.
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 5e001ffd4c1..efa0255491c 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -522,7 +522,8 @@ _base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
 		desc = "Device Status Change";
 		break;
 	case MPI2_EVENT_IR_OPERATION_STATUS:
-		desc = "IR Operation Status";
+		if (!ioc->hide_ir_msg)
+			desc = "IR Operation Status";
 		break;
 	case MPI2_EVENT_SAS_DISCOVERY:
 	{
@@ -553,16 +554,20 @@ _base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
 		desc = "SAS Enclosure Device Status Change";
 		break;
 	case MPI2_EVENT_IR_VOLUME:
-		desc = "IR Volume";
+		if (!ioc->hide_ir_msg)
+			desc = "IR Volume";
 		break;
 	case MPI2_EVENT_IR_PHYSICAL_DISK:
-		desc = "IR Physical Disk";
+		if (!ioc->hide_ir_msg)
+			desc = "IR Physical Disk";
 		break;
 	case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
-		desc = "IR Configuration Change List";
+		if (!ioc->hide_ir_msg)
+			desc = "IR Configuration Change List";
 		break;
 	case MPI2_EVENT_LOG_ENTRY_ADDED:
-		desc = "Log Entry Added";
+		if (!ioc->hide_ir_msg)
+			desc = "Log Entry Added";
 		break;
 	}
 
@@ -616,7 +621,10 @@ _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
 		originator_str = "PL";
 		break;
 	case 2:
-		originator_str = "IR";
+		if (!ioc->hide_ir_msg)
+			originator_str = "IR";
+		else
+			originator_str = "WarpDrive";
 		break;
 	}
 
@@ -925,7 +933,7 @@ _base_interrupt(int irq, void *bus_id)
 }
 
 /**
- * mpt2sas_base_release_callback_handler - clear interupt callback handler
+ * mpt2sas_base_release_callback_handler - clear interrupt callback handler
  * @cb_idx: callback index
  *
  * Return nothing.
@@ -1113,7 +1121,7 @@ _base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc)
  * @ioc: per adapter object
  *
  * Check to see if card is capable of MSIX, and set number
- * of avaliable msix vectors
+ * of available msix vectors
  */
 static int
 _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
@@ -1508,6 +1516,7 @@ mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 		}
 		ioc->scsi_lookup[i].cb_idx = 0xFF;
 		ioc->scsi_lookup[i].scmd = NULL;
+		ioc->scsi_lookup[i].direct_io = 0;
 		list_add_tail(&ioc->scsi_lookup[i].tracker_list,
 		    &ioc->free_list);
 		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -1595,7 +1604,7 @@ mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
 
 
 /**
- * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
+ * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
  * @ioc: per adapter object
  * @smid: system request message index
  *
@@ -1844,10 +1853,12 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
 	printk("), ");
 	printk("Capabilities=(");
 
-	if (ioc->facts.IOCCapabilities &
-	    MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
-		printk("Raid");
-		i++;
+	if (!ioc->hide_ir_msg) {
+		if (ioc->facts.IOCCapabilities &
+		    MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
+			printk("Raid");
+			i++;
+		}
 	}
 
 	if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
@@ -2599,7 +2610,7 @@ _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		}
@@ -2640,7 +2651,7 @@ _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
@@ -2688,7 +2699,7 @@ _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
 		doorbell_reg = readl(&ioc->chip->Doorbell);
 		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		}
@@ -3680,6 +3691,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	u32 reply_address;
 	u16 smid;
 	struct _tr_list *delayed_tr, *delayed_tr_next;
+	u8 hide_flag;
 
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
@@ -3706,6 +3718,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 		ioc->scsi_lookup[i].cb_idx = 0xFF;
 		ioc->scsi_lookup[i].smid = smid;
 		ioc->scsi_lookup[i].scmd = NULL;
+		ioc->scsi_lookup[i].direct_io = 0;
 		list_add_tail(&ioc->scsi_lookup[i].tracker_list,
 		    &ioc->free_list);
 	}
@@ -3766,6 +3779,15 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	if (sleep_flag == CAN_SLEEP)
 		_base_static_config_pages(ioc);
 
+	if (ioc->wait_for_port_enable_to_complete && ioc->is_warpdrive) {
+		if (ioc->manu_pg10.OEMIdentifier  == 0x80) {
+			hide_flag = (u8) (ioc->manu_pg10.OEMSpecificFlags0 &
+			    MFG_PAGE10_HIDE_SSDS_MASK);
+			if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
+				ioc->mfg_pg10_hide_flag = hide_flag;
+		}
+	}
+
 	if (ioc->wait_for_port_enable_to_complete) {
 		if (diag_buffer_enable != 0)
 			mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 500328245f6..2a3c05f6db8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,11 +69,11 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"08.100.00.00"
+#define MPT2SAS_DRIVER_VERSION		"08.100.00.01"
 #define MPT2SAS_MAJOR_VERSION		08
 #define MPT2SAS_MINOR_VERSION		100
 #define MPT2SAS_BUILD_VERSION		00
-#define MPT2SAS_RELEASE_VERSION		00
+#define MPT2SAS_RELEASE_VERSION		01
 
 /*
  * Set MPT2SAS_SG_DEPTH value based on user input.
@@ -189,6 +189,16 @@
 #define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID        0x0046
 
 /*
+ *  WarpDrive Specific Log codes
+ */
+
+#define MPT2_WARPDRIVE_LOGENTRY		(0x8002)
+#define MPT2_WARPDRIVE_LC_SSDT		(0x41)
+#define MPT2_WARPDRIVE_LC_SSDLW		(0x43)
+#define MPT2_WARPDRIVE_LC_SSDLF		(0x44)
+#define MPT2_WARPDRIVE_LC_BRMF		(0x4D)
+
+/*
  * per target private data
  */
 #define MPT_TARGET_FLAGS_RAID_COMPONENT	0x01
@@ -199,6 +209,7 @@
  * struct MPT2SAS_TARGET - starget private hostdata
  * @starget: starget object
  * @sas_address: target sas address
+ * @raid_device: raid_device pointer to access volume data
  * @handle: device handle
  * @num_luns: number luns
  * @flags: MPT_TARGET_FLAGS_XXX flags
@@ -208,6 +219,7 @@
 struct MPT2SAS_TARGET {
 	struct scsi_target *starget;
 	u64	sas_address;
+	struct _raid_device *raid_device;
 	u16	handle;
 	int	num_luns;
 	u32	flags;
@@ -215,6 +227,7 @@ struct MPT2SAS_TARGET {
 	u8	tm_busy;
 };
 
+
 /*
  * per device private data
  */
@@ -262,6 +275,12 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_10 {
   MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10,
   Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t;
 
+#define MFG_PAGE10_HIDE_SSDS_MASK	(0x00000003)
+#define MFG_PAGE10_HIDE_ALL_DISKS	(0x00)
+#define MFG_PAGE10_EXPOSE_ALL_DISKS	(0x01)
+#define MFG_PAGE10_HIDE_IF_VOL_PRESENT	(0x02)
+
+
 struct MPT2SAS_DEVICE {
 	struct MPT2SAS_TARGET *sas_target;
 	unsigned int	lun;
@@ -341,6 +360,7 @@ struct _sas_device {
  * @sdev: scsi device struct (volumes are single lun)
  * @wwid: unique identifier for the volume
  * @handle: device handle
+ * @block_size: Block size of the volume
  * @id: target id
  * @channel: target channel
  * @volume_type: the raid level
@@ -348,20 +368,33 @@ struct _sas_device {
  * @num_pds: number of hidden raid components
  * @responding: used in _scsih_raid_device_mark_responding
  * @percent_complete: resync percent complete
+ * @direct_io_enabled: Whether direct io to PDs are allowed or not
+ * @stripe_exponent: X where 2powX is the stripe sz in blocks
+ * @max_lba: Maximum number of LBA in the volume
+ * @stripe_sz: Stripe Size of the volume
+ * @device_info: Device info of the volume member disk
+ * @pd_handle: Array of handles of the physical drives for direct I/O in le16
  */
+#define MPT_MAX_WARPDRIVE_PDS		8
 struct _raid_device {
 	struct list_head list;
 	struct scsi_target *starget;
 	struct scsi_device *sdev;
 	u64	wwid;
 	u16	handle;
+	u16	block_sz;
 	int	id;
 	int	channel;
 	u8	volume_type;
-	u32	device_info;
 	u8	num_pds;
 	u8	responding;
 	u8	percent_complete;
+	u8	direct_io_enabled;
+	u8	stripe_exponent;
+	u64	max_lba;
+	u32	stripe_sz;
+	u32	device_info;
+	u16	pd_handle[MPT_MAX_WARPDRIVE_PDS];
 };
 
 /**
@@ -470,6 +503,7 @@ struct chain_tracker {
  * @smid: system message id
  * @scmd: scsi request pointer
  * @cb_idx: callback index
+ * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
  * @chain_list: list of chains associated to this IO
  * @tracker_list: list of free request (ioc->free_list)
  */
@@ -477,14 +511,14 @@ struct scsiio_tracker {
 	u16	smid;
 	struct scsi_cmnd *scmd;
 	u8	cb_idx;
+	u8	direct_io;
 	struct list_head chain_list;
 	struct list_head tracker_list;
 };
 
 /**
- * struct request_tracker - misc mf request tracker
+ * struct request_tracker - firmware request tracker
  * @smid: system message id
- * @scmd: scsi request pointer
  * @cb_idx: callback index
  * @tracker_list: list of free request (ioc->free_list)
  */
@@ -832,6 +866,11 @@ struct MPT2SAS_ADAPTER {
 	u32		diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
 	u32		ring_buffer_offset;
 	u32		ring_buffer_sz;
+	u8		is_warpdrive;
+	u8		hide_ir_msg;
+	u8		mfg_pg10_hide_flag;
+	u8		hide_drives;
+
 };
 
 typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 6afd67b324f..6861244249a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -93,7 +93,7 @@ struct config_request{
  * @mpi_reply: reply message frame
  * Context: none.
  *
- * Function for displaying debug info helpfull when debugging issues
+ * Function for displaying debug info helpful when debugging issues
  * in this module.
  */
 static void
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index e92b77af548..437c2d94c45 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -116,7 +116,7 @@ _ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * @mpi_reply: reply message frame
  * Context: none.
  *
- * Function for displaying debug info helpfull when debugging issues
+ * Function for displaying debug info helpful when debugging issues
  * in this module.
  */
 static void
@@ -688,6 +688,13 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 		goto out;
 	}
 
+	/* Check for overflow and wraparound */
+	if (karg.data_sge_offset * 4 > ioc->request_sz ||
+	    karg.data_sge_offset > (UINT_MAX / 4)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* copy in request message frame from user */
 	if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
 		printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__,
@@ -1034,7 +1041,10 @@ _ctl_getiocinfo(void __user *arg)
 	    __func__));
 
 	memset(&karg, 0 , sizeof(karg));
-	karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
+	if (ioc->is_warpdrive)
+		karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
+	else
+		karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
 	if (ioc->pfacts)
 		karg.port_number = ioc->pfacts[0].PortNumber;
 	pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
@@ -1963,7 +1973,7 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state)
 	Mpi2DiagBufferPostReply_t *mpi_reply;
 	int rc, i;
 	u8 buffer_type;
-	unsigned long timeleft;
+	unsigned long timeleft, request_size, copy_size;
 	u16 smid;
 	u16 ioc_status;
 	u8 issue_reset = 0;
@@ -1999,6 +2009,8 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state)
 		return -ENOMEM;
 	}
 
+	request_size = ioc->diag_buffer_sz[buffer_type];
+
 	if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
 		printk(MPT2SAS_ERR_FMT "%s: either the starting_offset "
 		    "or bytes_to_read are not 4 byte aligned\n", ioc->name,
@@ -2006,13 +2018,23 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state)
 		return -EINVAL;
 	}
 
+	if (karg.starting_offset > request_size)
+		return -EINVAL;
+
 	diag_data = (void *)(request_data + karg.starting_offset);
 	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), "
 	    "offset(%d), sz(%d)\n", ioc->name, __func__,
 	    diag_data, karg.starting_offset, karg.bytes_to_read));
 
+	/* Truncate data on requests that are too large */
+	if ((diag_data + karg.bytes_to_read < diag_data) ||
+	    (diag_data + karg.bytes_to_read > request_data + request_size))
+		copy_size = request_size - karg.starting_offset;
+	else
+		copy_size = karg.bytes_to_read;
+
 	if (copy_to_user((void __user *)uarg->diagnostic_data,
-	    diag_data, karg.bytes_to_read)) {
+	    diag_data, copy_size)) {
 		printk(MPT2SAS_ERR_FMT "%s: Unable to write "
 		    "mpt_diag_read_buffer_t data @ %p\n", ioc->name,
 		    __func__, diag_data);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index 69916e46e04..11ff1d5fb8f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -133,6 +133,7 @@ struct mpt2_ioctl_pci_info {
 #define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
 #define MPT2_IOCTL_INTERFACE_SAS	(0x03)
 #define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
+#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200	(0x05)
 #define MPT2_IOCTL_VERSION_LENGTH	(32)
 
 /**
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6ceb7759bfe..f12e02358d6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -233,6 +233,9 @@ static struct pci_device_id scsih_pci_table[] = {
 		PCI_ANY_ID, PCI_ANY_ID },
 	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
 		PCI_ANY_ID, PCI_ANY_ID },
+	/* SSS6200 */
+	{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
+		PCI_ANY_ID, PCI_ANY_ID },
 	{0}	/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(pci, scsih_pci_table);
@@ -397,7 +400,7 @@ _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
  * @is_raid: [flag] 1 = raid object, 0 = sas object
  *
  * Determines whether this device should be first reported device to
- * to scsi-ml or sas transport, this purpose is for persistant boot device.
+ * to scsi-ml or sas transport, this purpose is for persistent boot device.
  * There are primary, alternate, and current entries in bios page 2. The order
  * priority is primary, alternate, then current.  This routine saves
  * the corresponding device object and is_raid flag in the ioc object.
@@ -1256,6 +1259,7 @@ _scsih_target_alloc(struct scsi_target *starget)
 			sas_target_priv_data->handle = raid_device->handle;
 			sas_target_priv_data->sas_address = raid_device->wwid;
 			sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
+			sas_target_priv_data->raid_device = raid_device;
 			raid_device->starget = starget;
 		}
 		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
@@ -1455,7 +1459,10 @@ static int
 _scsih_is_raid(struct device *dev)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
 
+	if (ioc->is_warpdrive)
+		return 0;
 	return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
 }
 
@@ -1480,7 +1487,7 @@ _scsih_get_resync(struct device *dev)
 	    sdev->channel);
 	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 
-	if (!raid_device)
+	if (!raid_device || ioc->is_warpdrive)
 		goto out;
 
 	if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
@@ -1640,6 +1647,212 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
 
 	kfree(vol_pg0);
 }
+/**
+ * _scsih_disable_ddio - Disable direct I/O for all the volumes
+ * @ioc: per adapter object
+ */
+static void
+_scsih_disable_ddio(struct MPT2SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t vol_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	struct _raid_device *raid_device;
+	u16 handle;
+	u16 ioc_status;
+
+	handle = 0xFFFF;
+	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(vol_pg1.DevHandle);
+		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		if (raid_device)
+			raid_device->direct_io_enabled = 0;
+	}
+	return;
+}
+
+
+/**
+ * _scsih_get_num_volumes - Get number of volumes in the ioc
+ * @ioc: per adapter object
+ */
+static u8
+_scsih_get_num_volumes(struct MPT2SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t vol_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 handle;
+	u8 vol_cnt = 0;
+	u16 ioc_status;
+
+	handle = 0xFFFF;
+	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		vol_cnt++;
+		handle = le16_to_cpu(vol_pg1.DevHandle);
+	}
+	return vol_cnt;
+}
+
+
+/**
+ * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O.
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ */
+static void
+_scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	Mpi2RaidVolPage0_t *vol_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 sz;
+	u8 num_pds, count;
+	u64 mb = 1024 * 1024;
+	u64 tb_2 = 2 * mb * mb;
+	u64 capacity;
+	u32 stripe_sz;
+	u8 i, stripe_exp;
+
+	if (!ioc->is_warpdrive)
+		return;
+
+	if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS) {
+		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+		    "globally as drives are exposed\n", ioc->name);
+		return;
+	}
+	if (_scsih_get_num_volumes(ioc) > 1) {
+		_scsih_disable_ddio(ioc);
+		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+		    "globally as number of drives > 1\n", ioc->name);
+		return;
+	}
+	if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
+	    &num_pds)) || !num_pds) {
+		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+		    "Failure in computing number of drives\n", ioc->name);
+		return;
+	}
+
+	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+	    sizeof(Mpi2RaidVol0PhysDisk_t));
+	vol_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!vol_pg0) {
+		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+		    "Memory allocation failure for RVPG0\n", ioc->name);
+		return;
+	}
+
+	if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+		    "Failure in retrieving RVPG0\n", ioc->name);
+		kfree(vol_pg0);
+		return;
+	}
+
+	/*
+	 * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
+	 * assumed for WARPDRIVE, disable direct I/O
+	 */
+	if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
+		printk(MPT2SAS_WARN_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x): num_mem=%d, "
+		    "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
+		    num_pds, MPT_MAX_WARPDRIVE_PDS);
+		kfree(vol_pg0);
+		return;
+	}
+	for (count = 0; count < num_pds; count++) {
+		if (mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+		    vol_pg0->PhysDisk[count].PhysDiskNum) ||
+		    pd_pg0.DevHandle == MPT2SAS_INVALID_DEVICE_HANDLE) {
+			printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is "
+			    "disabled for the drive with handle(0x%04x) member"
+			    "handle retrieval failed for member number=%d\n",
+			    ioc->name, raid_device->handle,
+			    vol_pg0->PhysDisk[count].PhysDiskNum);
+			goto out_error;
+		}
+		raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
+	}
+
+	/*
+	 * Assumption for WD: Direct I/O is not supported if the volume is
+	 * not RAID0, if the stripe size is not 64KB, if the block size is
+	 * not 512 and if the volume size is >2TB
+	 */
+	if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0 ||
+	    le16_to_cpu(vol_pg0->BlockSize) != 512) {
+		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x): type=%d, "
+		    "s_sz=%uK, blk_size=%u\n", ioc->name,
+		    raid_device->handle, raid_device->volume_type,
+		    le32_to_cpu(vol_pg0->StripeSize)/2,
+		    le16_to_cpu(vol_pg0->BlockSize));
+		goto out_error;
+	}
+
+	capacity = (u64) le16_to_cpu(vol_pg0->BlockSize) *
+	    (le64_to_cpu(vol_pg0->MaxLBA) + 1);
+
+	if (capacity > tb_2) {
+		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+		"for the drive with handle(0x%04x) since drive sz > 2TB\n",
+		ioc->name, raid_device->handle);
+		goto out_error;
+	}
+
+	stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+	stripe_exp = 0;
+	for (i = 0; i < 32; i++) {
+		if (stripe_sz & 1)
+			break;
+		stripe_exp++;
+		stripe_sz >>= 1;
+	}
+	if (i == 32) {
+		printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x) invalid stripe sz %uK\n",
+		    ioc->name, raid_device->handle,
+		    le32_to_cpu(vol_pg0->StripeSize)/2);
+		goto out_error;
+	}
+	raid_device->stripe_exponent = stripe_exp;
+	raid_device->direct_io_enabled = 1;
+
+	printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive"
+	    " with handle(0x%04x)\n", ioc->name, raid_device->handle);
+	/*
+	 * WARPDRIVE: Though the following fields are not used for direct IO,
+	 * stored for future purpose:
+	 */
+	raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
+	raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+	raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
+
+
+	kfree(vol_pg0);
+	return;
+
+out_error:
+	raid_device->direct_io_enabled = 0;
+	for (count = 0; count < num_pds; count++)
+		raid_device->pd_handle[count] = 0;
+	kfree(vol_pg0);
+	return;
+}
 
 /**
  * _scsih_enable_tlr - setting TLR flags
@@ -1710,6 +1923,11 @@ _scsih_slave_configure(struct scsi_device *sdev)
 
 		_scsih_get_volume_capabilities(ioc, raid_device);
 
+		/*
+		 * WARPDRIVE: Initialize the required data for Direct IO
+		 */
+		_scsih_init_warpdrive_properties(ioc, raid_device);
+
 		/* RAID Queue Depth Support
 		 * IS volume = underlying qdepth of drive type, either
 		 *    MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH
@@ -1757,14 +1975,16 @@ _scsih_slave_configure(struct scsi_device *sdev)
 			break;
 		}
 
-		sdev_printk(KERN_INFO, sdev, "%s: "
-		    "handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n",
-		    r_level, raid_device->handle,
-		    (unsigned long long)raid_device->wwid,
-		    raid_device->num_pds, ds);
+		if (!ioc->hide_ir_msg)
+			sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
+			    "wwid(0x%016llx), pd_count(%d), type(%s)\n",
+			    r_level, raid_device->handle,
+			    (unsigned long long)raid_device->wwid,
+			    raid_device->num_pds, ds);
 		_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
 		/* raid transport support */
-		_scsih_set_level(sdev, raid_device);
+		if (!ioc->is_warpdrive)
+			_scsih_set_level(sdev, raid_device);
 		return 0;
 	}
 
@@ -2133,8 +2353,7 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint channel,
 	switch (type) {
 	case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
 		scmd_lookup = _scsih_scsi_lookup_get(ioc, smid_task);
-		if (scmd_lookup && (scmd_lookup->serial_number ==
-		    scmd->serial_number))
+		if (scmd_lookup)
 			rc = FAILED;
 		else
 			rc = SUCCESS;
@@ -2182,16 +2401,20 @@ _scsih_tm_display_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
 	struct MPT2SAS_TARGET *priv_target = starget->hostdata;
 	struct _sas_device *sas_device = NULL;
 	unsigned long flags;
+	char *device_str = NULL;
 
 	if (!priv_target)
 		return;
+	if (ioc->hide_ir_msg)
+		device_str = "WarpDrive";
+	else
+		device_str = "volume";
 
 	scsi_print_command(scmd);
 	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
-		starget_printk(KERN_INFO, starget, "volume handle(0x%04x), "
-		    "volume wwid(0x%016llx)\n",
-		    priv_target->handle,
-		    (unsigned long long)priv_target->sas_address);
+		starget_printk(KERN_INFO, starget, "%s handle(0x%04x), "
+		    "%s wwid(0x%016llx)\n", device_str, priv_target->handle,
+		    device_str, (unsigned long long)priv_target->sas_address);
 	} else {
 		spin_lock_irqsave(&ioc->sas_device_lock, flags);
 		sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
@@ -2671,10 +2894,10 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
  * @handle: device handle
  * Context: interrupt time.
  *
- * This code is to initiate the device removal handshake protocal
+ * This code is to initiate the device removal handshake protocol
  * with controller firmware.  This function will issue target reset
  * using high priority request queue.  It will send a sas iounit
- * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
  *
  * This is designed to send muliple task management request at the same
  * time to the fifo. If the fifo is full, we will append the request,
@@ -2749,9 +2972,9 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * @reply: reply message frame(lower 32bit addr)
  * Context: interrupt time.
  *
- * This is the sas iounit controll completion routine.
+ * This is the sas iounit control completion routine.
  * This code is part of the code to initiate the device removal
- * handshake protocal with controller firmware.
+ * handshake protocol with controller firmware.
  *
  * Return 1 meaning mf should be freed from _base_interrupt
  *        0 means the mf is freed from this function.
@@ -2878,8 +3101,8 @@ _scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
  *
  * This is the target reset completion routine.
  * This code is part of the code to initiate the device removal
- * handshake protocal with controller firmware.
- * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE)
+ * handshake protocol with controller firmware.
+ * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
  *
  * Return 1 meaning mf should be freed from _base_interrupt
  *        0 means the mf is freed from this function.
@@ -2984,7 +3207,7 @@ _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid)
  *
  * This routine added to better handle cable breaker.
  *
- * This handles the case where driver recieves multiple expander
+ * This handles the case where driver receives multiple expander
  * add and delete events in a single shot.  When there is a delete event
  * the routine will void any pending add events waiting in the event queue.
  *
@@ -3130,6 +3353,9 @@ _scsih_check_ir_config_unhide_events(struct MPT2SAS_ADAPTER *ioc,
 	a = 0;
 	b = 0;
 
+	if (ioc->is_warpdrive)
+		return;
+
 	/* Volume Resets for Deleted or Removed */
 	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
 	for (i = 0; i < event_data->NumElements; i++, element++) {
@@ -3347,6 +3573,105 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
 }
 
 /**
+ * _scsih_scsi_direct_io_get - returns direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ */
+static inline u8
+_scsih_scsi_direct_io_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+	return ioc->scsi_lookup[smid - 1].direct_io;
+}
+
+/**
+ * _scsih_scsi_direct_io_set - sets direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @direct_io: Zero or non-zero value to set in the direct_io flag
+ *
+ * Returns Nothing.
+ */
+static inline void
+_scsih_scsi_direct_io_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
+{
+	ioc->scsi_lookup[smid - 1].direct_io = direct_io;
+}
+
+
+/**
+ * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @raid_device: pointer to raid device data structure
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ * @smid: system request message index
+ *
+ * Returns nothing
+ */
+static void
+_scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+	u16 smid)
+{
+	u32 v_lba, p_lba, stripe_off, stripe_unit, column, io_size;
+	u32 stripe_sz, stripe_exp;
+	u8 num_pds, *cdb_ptr, *tmp_ptr, *lba_ptr1, *lba_ptr2;
+	u8 cdb0 = scmd->cmnd[0];
+
+	/*
+	 * Try Direct I/O to RAID memeber disks
+	 */
+	if (cdb0 == READ_16 || cdb0 == READ_10 ||
+	    cdb0 == WRITE_16 || cdb0 == WRITE_10) {
+		cdb_ptr = mpi_request->CDB.CDB32;
+
+		if ((cdb0 < READ_16) || !(cdb_ptr[2] | cdb_ptr[3] | cdb_ptr[4]
+			| cdb_ptr[5])) {
+			io_size = scsi_bufflen(scmd) >> 9;
+			/* get virtual lba */
+			lba_ptr1 = lba_ptr2 = (cdb0 < READ_16) ? &cdb_ptr[2] :
+			    &cdb_ptr[6];
+			tmp_ptr = (u8 *)&v_lba + 3;
+			*tmp_ptr-- = *lba_ptr1++;
+			*tmp_ptr-- = *lba_ptr1++;
+			*tmp_ptr-- = *lba_ptr1++;
+			*tmp_ptr = *lba_ptr1;
+
+			if (((u64)v_lba + (u64)io_size - 1) <=
+			    (u32)raid_device->max_lba) {
+				stripe_sz = raid_device->stripe_sz;
+				stripe_exp = raid_device->stripe_exponent;
+				stripe_off = v_lba & (stripe_sz - 1);
+
+				/* Check whether IO falls within a stripe */
+				if ((stripe_off + io_size) <= stripe_sz) {
+					num_pds = raid_device->num_pds;
+					p_lba = v_lba >> stripe_exp;
+					stripe_unit = p_lba / num_pds;
+					column = p_lba % num_pds;
+					p_lba = (stripe_unit << stripe_exp) +
+					    stripe_off;
+					mpi_request->DevHandle =
+						cpu_to_le16(raid_device->
+						    pd_handle[column]);
+					tmp_ptr = (u8 *)&p_lba + 3;
+					*lba_ptr2++ = *tmp_ptr--;
+					*lba_ptr2++ = *tmp_ptr--;
+					*lba_ptr2++ = *tmp_ptr--;
+					*lba_ptr2 = *tmp_ptr;
+					/*
+					* WD: To indicate this I/O is directI/O
+					*/
+					_scsih_scsi_direct_io_set(ioc, smid, 1);
+				}
+			}
+		}
+	}
+}
+
+/**
  * _scsih_qcmd - main scsi request entry point
  * @scmd: pointer to scsi command object
  * @done: function pointer to be invoked on completion
@@ -3363,6 +3688,7 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
 	struct MPT2SAS_TARGET *sas_target_priv_data;
+	struct _raid_device *raid_device;
 	Mpi2SCSIIORequest_t *mpi_request;
 	u32 mpi_control;
 	u16 smid;
@@ -3424,8 +3750,10 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 
 	} else
 		mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-	/* Make sure Device is not raid volume */
-	if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
+	/* Make sure Device is not raid volume.
+	 * We do not expose raid functionality to upper layer for warpdrive.
+	 */
+	if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
 	    sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
 		mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
 
@@ -3473,9 +3801,14 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 		}
 	}
 
+	raid_device = sas_target_priv_data->raid_device;
+	if (raid_device && raid_device->direct_io_enabled)
+		_scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request,
+		    smid);
+
 	if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST))
 		mpt2sas_base_put_smid_scsi_io(ioc, smid,
-		    sas_device_priv_data->sas_target->handle);
+		    le16_to_cpu(mpi_request->DevHandle));
 	else
 		mpt2sas_base_put_smid_default(ioc, smid);
 	return 0;
@@ -3511,7 +3844,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
- * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
+ * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request
  * @ioc: per adapter object
  * @scmd: pointer to scsi command object
  * @mpi_reply: reply mf payload returned from firmware
@@ -3540,10 +3873,16 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 	unsigned long flags;
 	struct scsi_target *starget = scmd->device->sdev_target;
 	struct MPT2SAS_TARGET *priv_target = starget->hostdata;
+	char *device_str = NULL;
 
 	if (!priv_target)
 		return;
 
+	if (ioc->hide_ir_msg)
+		device_str = "WarpDrive";
+	else
+		device_str = "volume";
+
 	if (log_info == 0x31170000)
 		return;
 
@@ -3660,8 +3999,8 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 	scsi_print_command(scmd);
 
 	if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
-		printk(MPT2SAS_WARN_FMT "\tvolume wwid(0x%016llx)\n", ioc->name,
-		    (unsigned long long)priv_target->sas_address);
+		printk(MPT2SAS_WARN_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
+		    device_str, (unsigned long long)priv_target->sas_address);
 	} else {
 		spin_lock_irqsave(&ioc->sas_device_lock, flags);
 		sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
@@ -3840,6 +4179,20 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 		scmd->result = DID_NO_CONNECT << 16;
 		goto out;
 	}
+	/*
+	 * WARPDRIVE: If direct_io is set then it is directIO,
+	 * the failed direct I/O should be redirected to volume
+	 */
+	if (_scsih_scsi_direct_io_get(ioc, smid)) {
+		_scsih_scsi_direct_io_set(ioc, smid, 0);
+		memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+		mpi_request->DevHandle =
+		    cpu_to_le16(sas_device_priv_data->sas_target->handle);
+		mpt2sas_base_put_smid_scsi_io(ioc, smid,
+		    sas_device_priv_data->sas_target->handle);
+		return 0;
+	}
+
 
 	/* turning off TLR */
 	scsi_state = mpi_reply->SCSIState;
@@ -3848,7 +4201,10 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 		    le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
 	if (!sas_device_priv_data->tlr_snoop_check) {
 		sas_device_priv_data->tlr_snoop_check++;
-	if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
+	/* Make sure Device is not raid volume.
+	 * We do not expose raid functionality to upper layer for warpdrive.
+	 */
+	if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
 		sas_is_tlr_enabled(scmd->device) &&
 		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
 			sas_disable_tlr(scmd->device);
@@ -4681,8 +5037,10 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
 
 	_scsih_ublock_io_device(ioc, sas_device_backup.handle);
 
-	mpt2sas_transport_port_remove(ioc, sas_device_backup.sas_address,
-	    sas_device_backup.sas_address_parent);
+	if (!ioc->hide_drives)
+		mpt2sas_transport_port_remove(ioc,
+		    sas_device_backup.sas_address,
+		    sas_device_backup.sas_address_parent);
 
 	printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
 	    "(0x%016llx)\n", ioc->name, sas_device_backup.handle,
@@ -5138,7 +5496,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
 	unsigned long flags;
 	int r;
 
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: "
+	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primitive: "
 	    "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
 	    event_data->PortWidth));
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
@@ -5413,6 +5771,7 @@ _scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc,
 	    &sas_device->volume_wwid);
 	set_bit(handle, ioc->pd_handles);
 	_scsih_reprobe_target(sas_device->starget, 1);
+
 }
 
 /**
@@ -5591,7 +5950,8 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
 	Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data;
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+	    && !ioc->hide_ir_msg)
 		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
 
 #endif
@@ -5614,16 +5974,20 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
 				    le16_to_cpu(element->VolDevHandle));
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
-			_scsih_sas_pd_hide(ioc, element);
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_hide(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
-			_scsih_sas_pd_expose(ioc, element);
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_expose(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_HIDE:
-			_scsih_sas_pd_add(ioc, element);
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_add(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
-			_scsih_sas_pd_delete(ioc, element);
+			if (!ioc->is_warpdrive)
+				_scsih_sas_pd_delete(ioc, element);
 			break;
 		}
 	}
@@ -5654,9 +6018,10 @@ _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
 
 	handle = le16_to_cpu(event_data->VolDevHandle);
 	state = le32_to_cpu(event_data->NewValue);
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
-	    "old(0x%08x), new(0x%08x)\n", ioc->name, __func__,  handle,
-	    le32_to_cpu(event_data->PreviousValue), state));
+	if (!ioc->hide_ir_msg)
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
+		    "old(0x%08x), new(0x%08x)\n", ioc->name, __func__,  handle,
+		    le32_to_cpu(event_data->PreviousValue), state));
 
 	switch (state) {
 	case MPI2_RAID_VOL_STATE_MISSING:
@@ -5736,9 +6101,10 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
 	handle = le16_to_cpu(event_data->PhysDiskDevHandle);
 	state = le32_to_cpu(event_data->NewValue);
 
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
-	    "old(0x%08x), new(0x%08x)\n", ioc->name, __func__,  handle,
-	    le32_to_cpu(event_data->PreviousValue), state));
+	if (!ioc->hide_ir_msg)
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
+		    "old(0x%08x), new(0x%08x)\n", ioc->name, __func__,  handle,
+		    le32_to_cpu(event_data->PreviousValue), state));
 
 	switch (state) {
 	case MPI2_RAID_PD_STATE_ONLINE:
@@ -5747,7 +6113,8 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
 	case MPI2_RAID_PD_STATE_OPTIMAL:
 	case MPI2_RAID_PD_STATE_HOT_SPARE:
 
-		set_bit(handle, ioc->pd_handles);
+		if (!ioc->is_warpdrive)
+			set_bit(handle, ioc->pd_handles);
 
 		spin_lock_irqsave(&ioc->sas_device_lock, flags);
 		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
@@ -5851,7 +6218,8 @@ _scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
 	u16 handle;
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
-	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+	if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+	    && !ioc->hide_ir_msg)
 		_scsih_sas_ir_operation_status_event_debug(ioc,
 		     event_data);
 #endif
@@ -5910,7 +6278,7 @@ static void
 _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
     u16 slot, u16 handle)
 {
-	struct MPT2SAS_TARGET *sas_target_priv_data;
+	struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
 	struct scsi_target *starget;
 	struct _sas_device *sas_device;
 	unsigned long flags;
@@ -5918,7 +6286,7 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
 		if (sas_device->sas_address == sas_address &&
-		    sas_device->slot == slot && sas_device->starget) {
+		    sas_device->slot == slot) {
 			sas_device->responding = 1;
 			starget = sas_device->starget;
 			if (starget && starget->hostdata) {
@@ -5927,13 +6295,15 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
 				sas_target_priv_data->deleted = 0;
 			} else
 				sas_target_priv_data = NULL;
-			starget_printk(KERN_INFO, sas_device->starget,
-			    "handle(0x%04x), sas_addr(0x%016llx), enclosure "
-			    "logical id(0x%016llx), slot(%d)\n", handle,
-			    (unsigned long long)sas_device->sas_address,
-			    (unsigned long long)
-			    sas_device->enclosure_logical_id,
-			    sas_device->slot);
+			if (starget)
+				starget_printk(KERN_INFO, starget,
+				    "handle(0x%04x), sas_addr(0x%016llx), "
+				    "enclosure logical id(0x%016llx), "
+				    "slot(%d)\n", handle,
+				    (unsigned long long)sas_device->sas_address,
+				    (unsigned long long)
+				    sas_device->enclosure_logical_id,
+				    sas_device->slot);
 			if (sas_device->handle == handle)
 				goto out;
 			printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
@@ -6025,6 +6395,12 @@ _scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid,
 			starget_printk(KERN_INFO, raid_device->starget,
 			    "handle(0x%04x), wwid(0x%016llx)\n", handle,
 			    (unsigned long long)raid_device->wwid);
+			/*
+			 * WARPDRIVE: The handles of the PDs might have changed
+			 * across the host reset so re-initialize the
+			 * required data for Direct IO
+			 */
+			_scsih_init_warpdrive_properties(ioc, raid_device);
 			if (raid_device->handle == handle)
 				goto out;
 			printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
@@ -6086,18 +6462,20 @@ _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
 	}
 
 	/* refresh the pd_handles */
-	phys_disk_num = 0xFF;
-	memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
-	while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
-	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
-	    phys_disk_num))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
-		phys_disk_num = pd_pg0.PhysDiskNum;
-		handle = le16_to_cpu(pd_pg0.DevHandle);
-		set_bit(handle, ioc->pd_handles);
+	if (!ioc->is_warpdrive) {
+		phys_disk_num = 0xFF;
+		memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
+		while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
+		    phys_disk_num))) {
+			ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+			    MPI2_IOCSTATUS_MASK;
+			if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+				break;
+			phys_disk_num = pd_pg0.PhysDiskNum;
+			handle = le16_to_cpu(pd_pg0.DevHandle);
+			set_bit(handle, ioc->pd_handles);
+		}
 	}
 }
 
@@ -6243,6 +6621,50 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
+ * _scsih_hide_unhide_sas_devices - add/remove device to/from OS
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_hide_unhide_sas_devices(struct MPT2SAS_ADAPTER *ioc)
+{
+	struct _sas_device *sas_device, *sas_device_next;
+
+	if (!ioc->is_warpdrive || ioc->mfg_pg10_hide_flag !=
+	    MFG_PAGE10_HIDE_IF_VOL_PRESENT)
+		return;
+
+	if (ioc->hide_drives) {
+		if (_scsih_get_num_volumes(ioc))
+			return;
+		ioc->hide_drives = 0;
+		list_for_each_entry_safe(sas_device, sas_device_next,
+		    &ioc->sas_device_list, list) {
+			if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
+				sas_device->sas_address_parent)) {
+				_scsih_sas_device_remove(ioc, sas_device);
+			} else if (!sas_device->starget) {
+				mpt2sas_transport_port_remove(ioc,
+				    sas_device->sas_address,
+				    sas_device->sas_address_parent);
+				_scsih_sas_device_remove(ioc, sas_device);
+			}
+		}
+	} else {
+		if (!_scsih_get_num_volumes(ioc))
+			return;
+		ioc->hide_drives = 1;
+		list_for_each_entry_safe(sas_device, sas_device_next,
+		    &ioc->sas_device_list, list) {
+			mpt2sas_transport_port_remove(ioc,
+			    sas_device->sas_address,
+			    sas_device->sas_address_parent);
+		}
+	}
+}
+
+/**
  * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
  * @ioc: per adapter object
  * @reset_phase: phase
@@ -6326,6 +6748,7 @@ _firmware_event_work(struct work_struct *work)
 			spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
 			    flags);
 		_scsih_remove_unresponding_sas_devices(ioc);
+		_scsih_hide_unhide_sas_devices(ioc);
 		return;
 	}
 
@@ -6425,6 +6848,53 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
 		    (Mpi2EventDataIrVolume_t *)
 		    mpi_reply->EventData);
 		break;
+	case MPI2_EVENT_LOG_ENTRY_ADDED:
+	{
+		Mpi2EventDataLogEntryAdded_t *log_entry;
+		u32 *log_code;
+
+		if (!ioc->is_warpdrive)
+			break;
+
+		log_entry = (Mpi2EventDataLogEntryAdded_t *)
+		    mpi_reply->EventData;
+		log_code = (u32 *)log_entry->LogData;
+
+		if (le16_to_cpu(log_entry->LogEntryQualifier)
+		    != MPT2_WARPDRIVE_LOGENTRY)
+			break;
+
+		switch (le32_to_cpu(*log_code)) {
+		case MPT2_WARPDRIVE_LC_SSDT:
+			printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
+			    "IO Throttling has occurred in the WarpDrive "
+			    "subsystem. Check WarpDrive documentation for "
+			    "additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_SSDLW:
+			printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
+			    "Program/Erase Cycles for the WarpDrive subsystem "
+			    "in degraded range. Check WarpDrive documentation "
+			    "for additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_SSDLF:
+			printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
+			    "There are no Program/Erase Cycles for the "
+			    "WarpDrive subsystem. The storage device will be "
+			    "in read-only mode. Check WarpDrive documentation "
+			    "for additional details.\n", ioc->name);
+			break;
+		case MPT2_WARPDRIVE_LC_BRMF:
+			printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
+			    "The Backup Rail Monitor has failed on the "
+			    "WarpDrive subsystem. Check WarpDrive "
+			    "documentation for additional details.\n",
+			    ioc->name);
+			break;
+		}
+
+		break;
+	}
 	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
 	case MPI2_EVENT_IR_OPERATION_STATUS:
 	case MPI2_EVENT_SAS_DISCOVERY:
@@ -6583,7 +7053,8 @@ _scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc)
 	mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
 	mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
 
-	printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
+	if (!ioc->hide_ir_msg)
+		printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
 	init_completion(&ioc->scsih_cmds.done);
 	mpt2sas_base_put_smid_default(ioc, smid);
 	wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
@@ -6597,10 +7068,11 @@ _scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc)
 	if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) {
 		mpi_reply = ioc->scsih_cmds.reply;
 
-		printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
-		    "ioc_status(0x%04x), loginfo(0x%08x)\n",
-		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
-		    le32_to_cpu(mpi_reply->IOCLogInfo));
+		if (!ioc->hide_ir_msg)
+			printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
+			    "ioc_status(0x%04x), loginfo(0x%08x)\n",
+			    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+			    le32_to_cpu(mpi_reply->IOCLogInfo));
 	}
 
  out:
@@ -6759,6 +7231,9 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
 		spin_lock_irqsave(&ioc->sas_device_lock, flags);
 		list_move_tail(&sas_device->list, &ioc->sas_device_list);
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+		if (ioc->hide_drives)
+			return;
 		if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
 		    sas_device->sas_address_parent)) {
 			_scsih_sas_device_remove(ioc, sas_device);
@@ -6812,6 +7287,9 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
 		list_move_tail(&sas_device->list, &ioc->sas_device_list);
 		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
+		if (ioc->hide_drives)
+			continue;
+
 		if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
 		    sas_device->sas_address_parent)) {
 			_scsih_sas_device_remove(ioc, sas_device);
@@ -6882,6 +7360,11 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->id = mpt_ids++;
 	sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id);
 	ioc->pdev = pdev;
+	if (id->device == MPI2_MFGPAGE_DEVID_SSS6200) {
+		ioc->is_warpdrive = 1;
+		ioc->hide_ir_msg = 1;
+	} else
+		ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
 	ioc->scsi_io_cb_idx = scsi_io_cb_idx;
 	ioc->tm_cb_idx = tm_cb_idx;
 	ioc->ctl_cb_idx = ctl_cb_idx;
@@ -6947,6 +7430,20 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	ioc->wait_for_port_enable_to_complete = 0;
+	if (ioc->is_warpdrive) {
+		if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
+			ioc->hide_drives = 0;
+		else if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_HIDE_ALL_DISKS)
+			ioc->hide_drives = 1;
+		else {
+			if (_scsih_get_num_volumes(ioc))
+				ioc->hide_drives = 1;
+			else
+				ioc->hide_drives = 0;
+		}
+	} else
+		ioc->hide_drives = 0;
+
 	_scsih_probe_devices(ioc);
 	return 0;
 
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
index 6de7af27e50..c82b012aba3 100644
--- a/drivers/scsi/mvsas/Kconfig
+++ b/drivers/scsi/mvsas/Kconfig
@@ -3,6 +3,7 @@
 #
 # Copyright 2007 Red Hat, Inc.
 # Copyright 2008 Marvell. <kewei@marvell.com>
+# Copyright 2009-20011 Marvell. <yuxiangl@marvell.com>
 #
 # This file is licensed under GPLv2.
 #
diff --git a/drivers/scsi/mvsas/Makefile b/drivers/scsi/mvsas/Makefile
index ffbf759e46f..87b231a5bd5 100644
--- a/drivers/scsi/mvsas/Makefile
+++ b/drivers/scsi/mvsas/Makefile
@@ -3,6 +3,7 @@
 #
 # Copyright 2007 Red Hat, Inc.
 # Copyright 2008 Marvell. <kewei@marvell.com>
+# Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
 #
 # This file is licensed under GPLv2.
 #
diff --git a/drivers/scsi/mvsas/mv_64xx.c b/drivers/scsi/mvsas/mv_64xx.c
index afc7f6f3a13..13c96048139 100644
--- a/drivers/scsi/mvsas/mv_64xx.c
+++ b/drivers/scsi/mvsas/mv_64xx.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
diff --git a/drivers/scsi/mvsas/mv_64xx.h b/drivers/scsi/mvsas/mv_64xx.h
index 42e947d9795..545889bd975 100644
--- a/drivers/scsi/mvsas/mv_64xx.h
+++ b/drivers/scsi/mvsas/mv_64xx.h
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
index eed4c5c7201..78162c3c36e 100644
--- a/drivers/scsi/mvsas/mv_94xx.c
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
index 23ed9b16466..8835befe2c0 100644
--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
diff --git a/drivers/scsi/mvsas/mv_chips.h b/drivers/scsi/mvsas/mv_chips.h
index a67e1c4172f..1753a6fc42d 100644
--- a/drivers/scsi/mvsas/mv_chips.h
+++ b/drivers/scsi/mvsas/mv_chips.h
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
diff --git a/drivers/scsi/mvsas/mv_defs.h b/drivers/scsi/mvsas/mv_defs.h
index 1849da1f030..bc00c940743 100644
--- a/drivers/scsi/mvsas/mv_defs.h
+++ b/drivers/scsi/mvsas/mv_defs.h
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
@@ -34,6 +35,8 @@ enum chip_flavors {
 	chip_6485,
 	chip_9480,
 	chip_9180,
+	chip_9445,
+	chip_9485,
 	chip_1300,
 	chip_1320
 };
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 938d045e418..90b636611cd 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
@@ -25,13 +26,24 @@
 
 #include "mv_sas.h"
 
+static int lldd_max_execute_num = 1;
+module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
+MODULE_PARM_DESC(collector, "\n"
+	"\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
+	"\tMode.  If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
+	"\tThe mvsas SAS LLDD supports both modes.\n"
+	"\tDefault: 1 (Direct Mode).\n");
+
 static struct scsi_transport_template *mvs_stt;
+struct kmem_cache *mvs_task_list_cache;
 static const struct mvs_chip_info mvs_chips[] = {
 	[chip_6320] =	{ 1, 2, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
 	[chip_6440] =	{ 1, 4, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
 	[chip_6485] =	{ 1, 8, 0x800, 33, 32, 10, &mvs_64xx_dispatch, },
 	[chip_9180] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
 	[chip_9480] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
+	[chip_9445] =	{ 1, 4, 0x800, 17, 64, 11, &mvs_94xx_dispatch, },
+	[chip_9485] =	{ 2, 4, 0x800, 17, 64, 11, &mvs_94xx_dispatch, },
 	[chip_1300] =	{ 1, 4, 0x400, 17, 16,  9, &mvs_64xx_dispatch, },
 	[chip_1320] =	{ 2, 4, 0x800, 17, 64,  9, &mvs_94xx_dispatch, },
 };
@@ -107,7 +119,6 @@ static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
 
 static void mvs_free(struct mvs_info *mvi)
 {
-	int i;
 	struct mvs_wq *mwq;
 	int slot_nr;
 
@@ -119,12 +130,8 @@ static void mvs_free(struct mvs_info *mvi)
 	else
 		slot_nr = MVS_SLOTS;
 
-	for (i = 0; i < mvi->tags_num; i++) {
-		struct mvs_slot_info *slot = &mvi->slot_info[i];
-		if (slot->buf)
-			dma_free_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
-					  slot->buf, slot->buf_dma);
-	}
+	if (mvi->dma_pool)
+		pci_pool_destroy(mvi->dma_pool);
 
 	if (mvi->tx)
 		dma_free_coherent(mvi->dev,
@@ -213,6 +220,7 @@ static irqreturn_t mvs_interrupt(int irq, void *opaque)
 static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
 {
 	int i = 0, slot_nr;
+	char pool_name[32];
 
 	if (mvi->flags & MVF_FLAG_SOC)
 		slot_nr = MVS_SOC_SLOTS;
@@ -272,18 +280,14 @@ static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
 	if (!mvi->bulk_buffer)
 		goto err_out;
 #endif
-	for (i = 0; i < slot_nr; i++) {
-		struct mvs_slot_info *slot = &mvi->slot_info[i];
-
-		slot->buf = dma_alloc_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
-					       &slot->buf_dma, GFP_KERNEL);
-		if (!slot->buf) {
-			printk(KERN_DEBUG"failed to allocate slot->buf.\n");
+	sprintf(pool_name, "%s%d", "mvs_dma_pool", mvi->id);
+	mvi->dma_pool = pci_pool_create(pool_name, mvi->pdev, MVS_SLOT_BUF_SZ, 16, 0);
+	if (!mvi->dma_pool) {
+			printk(KERN_DEBUG "failed to create dma pool %s.\n", pool_name);
 			goto err_out;
-		}
-		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
-		++mvi->tags_num;
 	}
+	mvi->tags_num = slot_nr;
+
 	/* Initialize tags */
 	mvs_tag_init(mvi);
 	return 0;
@@ -484,7 +488,7 @@ static void  __devinit mvs_post_sas_ha_init(struct Scsi_Host *shost,
 
 	sha->num_phys = nr_core * chip_info->n_phy;
 
-	sha->lldd_max_execute_num = 1;
+	sha->lldd_max_execute_num = lldd_max_execute_num;
 
 	if (mvi->flags & MVF_FLAG_SOC)
 		can_queue = MVS_SOC_CAN_QUEUE;
@@ -670,6 +674,24 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = {
 	{ PCI_VDEVICE(TTI, 0x2740), chip_9480 },
 	{ PCI_VDEVICE(TTI, 0x2744), chip_9480 },
 	{ PCI_VDEVICE(TTI, 0x2760), chip_9480 },
+	{
+		.vendor		= 0x1b4b,
+		.device		= 0x9445,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= 0x9480,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= chip_9445,
+	},
+	{
+		.vendor		= 0x1b4b,
+		.device		= 0x9485,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= 0x9480,
+		.class		= 0,
+		.class_mask	= 0,
+		.driver_data	= chip_9485,
+	},
 
 	{ }	/* terminate list */
 };
@@ -690,6 +712,14 @@ static int __init mvs_init(void)
 	if (!mvs_stt)
 		return -ENOMEM;
 
+	mvs_task_list_cache = kmem_cache_create("mvs_task_list", sizeof(struct mvs_task_list),
+							 0, SLAB_HWCACHE_ALIGN, NULL);
+	if (!mvs_task_list_cache) {
+		rc = -ENOMEM;
+		mv_printk("%s: mvs_task_list_cache alloc failed! \n", __func__);
+		goto err_out;
+	}
+
 	rc = pci_register_driver(&mvs_pci_driver);
 
 	if (rc)
@@ -706,6 +736,7 @@ static void __exit mvs_exit(void)
 {
 	pci_unregister_driver(&mvs_pci_driver);
 	sas_release_transport(mvs_stt);
+	kmem_cache_destroy(mvs_task_list_cache);
 }
 
 module_init(mvs_init);
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index adedaa916ec..0ef27425c44 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
@@ -862,178 +863,286 @@ static int mvs_task_prep_ssp(struct mvs_info *mvi,
 }
 
 #define	DEV_IS_GONE(mvi_dev)	((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE)))
-static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
-				struct completion *completion,int is_tmf,
-				struct mvs_tmf_task *tmf)
+static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf,
+				struct mvs_tmf_task *tmf, int *pass)
 {
 	struct domain_device *dev = task->dev;
-	struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
-	struct mvs_info *mvi = mvi_dev->mvi_info;
+	struct mvs_device *mvi_dev = dev->lldd_dev;
 	struct mvs_task_exec_info tei;
-	struct sas_task *t = task;
 	struct mvs_slot_info *slot;
-	u32 tag = 0xdeadbeef, rc, n_elem = 0;
-	u32 n = num, pass = 0;
-	unsigned long flags = 0,  flags_libsas = 0;
+	u32 tag = 0xdeadbeef, n_elem = 0;
+	int rc = 0;
 
 	if (!dev->port) {
-		struct task_status_struct *tsm = &t->task_status;
+		struct task_status_struct *tsm = &task->task_status;
 
 		tsm->resp = SAS_TASK_UNDELIVERED;
 		tsm->stat = SAS_PHY_DOWN;
+		/*
+		 * libsas will use dev->port, should
+		 * not call task_done for sata
+		 */
 		if (dev->dev_type != SATA_DEV)
-			t->task_done(t);
-		return 0;
+			task->task_done(task);
+		return rc;
 	}
 
-	spin_lock_irqsave(&mvi->lock, flags);
-	do {
-		dev = t->dev;
-		mvi_dev = dev->lldd_dev;
-		if (DEV_IS_GONE(mvi_dev)) {
-			if (mvi_dev)
-				mv_dprintk("device %d not ready.\n",
-					mvi_dev->device_id);
-			else
-				mv_dprintk("device %016llx not ready.\n",
-					SAS_ADDR(dev->sas_addr));
+	if (DEV_IS_GONE(mvi_dev)) {
+		if (mvi_dev)
+			mv_dprintk("device %d not ready.\n",
+				mvi_dev->device_id);
+		else
+			mv_dprintk("device %016llx not ready.\n",
+				SAS_ADDR(dev->sas_addr));
 
 			rc = SAS_PHY_DOWN;
-			goto out_done;
-		}
+			return rc;
+	}
+	tei.port = dev->port->lldd_port;
+	if (tei.port && !tei.port->port_attached && !tmf) {
+		if (sas_protocol_ata(task->task_proto)) {
+			struct task_status_struct *ts = &task->task_status;
+			mv_dprintk("SATA/STP port %d does not attach"
+					"device.\n", dev->port->id);
+			ts->resp = SAS_TASK_COMPLETE;
+			ts->stat = SAS_PHY_DOWN;
 
-		if (dev->port->id >= mvi->chip->n_phy)
-			tei.port = &mvi->port[dev->port->id - mvi->chip->n_phy];
-		else
-			tei.port = &mvi->port[dev->port->id];
-
-		if (tei.port && !tei.port->port_attached) {
-			if (sas_protocol_ata(t->task_proto)) {
-				struct task_status_struct *ts = &t->task_status;
-
-				mv_dprintk("port %d does not"
-					"attached device.\n", dev->port->id);
-				ts->stat = SAS_PROTO_RESPONSE;
-				ts->stat = SAS_PHY_DOWN;
-				spin_unlock_irqrestore(dev->sata_dev.ap->lock,
-						       flags_libsas);
-				spin_unlock_irqrestore(&mvi->lock, flags);
-				t->task_done(t);
-				spin_lock_irqsave(&mvi->lock, flags);
-				spin_lock_irqsave(dev->sata_dev.ap->lock,
-						  flags_libsas);
-				if (n > 1)
-					t = list_entry(t->list.next,
-						       struct sas_task, list);
-				continue;
-			} else {
-				struct task_status_struct *ts = &t->task_status;
-				ts->resp = SAS_TASK_UNDELIVERED;
-				ts->stat = SAS_PHY_DOWN;
-				t->task_done(t);
-				if (n > 1)
-					t = list_entry(t->list.next,
-							struct sas_task, list);
-				continue;
-			}
-		}
+			task->task_done(task);
 
-		if (!sas_protocol_ata(t->task_proto)) {
-			if (t->num_scatter) {
-				n_elem = dma_map_sg(mvi->dev,
-						    t->scatter,
-						    t->num_scatter,
-						    t->data_dir);
-				if (!n_elem) {
-					rc = -ENOMEM;
-					goto err_out;
-				}
-			}
 		} else {
-			n_elem = t->num_scatter;
+			struct task_status_struct *ts = &task->task_status;
+			mv_dprintk("SAS port %d does not attach"
+				"device.\n", dev->port->id);
+			ts->resp = SAS_TASK_UNDELIVERED;
+			ts->stat = SAS_PHY_DOWN;
+			task->task_done(task);
 		}
+		return rc;
+	}
 
-		rc = mvs_tag_alloc(mvi, &tag);
-		if (rc)
-			goto err_out;
+	if (!sas_protocol_ata(task->task_proto)) {
+		if (task->num_scatter) {
+			n_elem = dma_map_sg(mvi->dev,
+					    task->scatter,
+					    task->num_scatter,
+					    task->data_dir);
+			if (!n_elem) {
+				rc = -ENOMEM;
+				goto prep_out;
+			}
+		}
+	} else {
+		n_elem = task->num_scatter;
+	}
 
-		slot = &mvi->slot_info[tag];
+	rc = mvs_tag_alloc(mvi, &tag);
+	if (rc)
+		goto err_out;
 
+	slot = &mvi->slot_info[tag];
 
-		t->lldd_task = NULL;
-		slot->n_elem = n_elem;
-		slot->slot_tag = tag;
-		memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+	task->lldd_task = NULL;
+	slot->n_elem = n_elem;
+	slot->slot_tag = tag;
+
+	slot->buf = pci_pool_alloc(mvi->dma_pool, GFP_ATOMIC, &slot->buf_dma);
+	if (!slot->buf)
+		goto err_out_tag;
+	memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+
+	tei.task = task;
+	tei.hdr = &mvi->slot[tag];
+	tei.tag = tag;
+	tei.n_elem = n_elem;
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SMP:
+		rc = mvs_task_prep_smp(mvi, &tei);
+		break;
+	case SAS_PROTOCOL_SSP:
+		rc = mvs_task_prep_ssp(mvi, &tei, is_tmf, tmf);
+		break;
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+		rc = mvs_task_prep_ata(mvi, &tei);
+		break;
+	default:
+		dev_printk(KERN_ERR, mvi->dev,
+			"unknown sas_task proto: 0x%x\n",
+			task->task_proto);
+		rc = -EINVAL;
+		break;
+	}
 
-		tei.task = t;
-		tei.hdr = &mvi->slot[tag];
-		tei.tag = tag;
-		tei.n_elem = n_elem;
-		switch (t->task_proto) {
-		case SAS_PROTOCOL_SMP:
-			rc = mvs_task_prep_smp(mvi, &tei);
-			break;
-		case SAS_PROTOCOL_SSP:
-			rc = mvs_task_prep_ssp(mvi, &tei, is_tmf, tmf);
-			break;
-		case SAS_PROTOCOL_SATA:
-		case SAS_PROTOCOL_STP:
-		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
-			rc = mvs_task_prep_ata(mvi, &tei);
-			break;
-		default:
-			dev_printk(KERN_ERR, mvi->dev,
-				   "unknown sas_task proto: 0x%x\n",
-				   t->task_proto);
-			rc = -EINVAL;
-			break;
-		}
+	if (rc) {
+		mv_dprintk("rc is %x\n", rc);
+		goto err_out_slot_buf;
+	}
+	slot->task = task;
+	slot->port = tei.port;
+	task->lldd_task = slot;
+	list_add_tail(&slot->entry, &tei.port->list);
+	spin_lock(&task->task_state_lock);
+	task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+	spin_unlock(&task->task_state_lock);
 
-		if (rc) {
-			mv_dprintk("rc is %x\n", rc);
-			goto err_out_tag;
-		}
-		slot->task = t;
-		slot->port = tei.port;
-		t->lldd_task = slot;
-		list_add_tail(&slot->entry, &tei.port->list);
-		/* TODO: select normal or high priority */
-		spin_lock(&t->task_state_lock);
-		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
-		spin_unlock(&t->task_state_lock);
-
-		mvs_hba_memory_dump(mvi, tag, t->task_proto);
-		mvi_dev->running_req++;
-		++pass;
-		mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-		if (n > 1)
-			t = list_entry(t->list.next, struct sas_task, list);
-		if (likely(pass))
-			MVS_CHIP_DISP->start_delivery(mvi, (mvi->tx_prod - 1) &
-						      (MVS_CHIP_SLOT_SZ - 1));
+	mvs_hba_memory_dump(mvi, tag, task->task_proto);
+	mvi_dev->running_req++;
+	++(*pass);
+	mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
 
-	} while (--n);
-	rc = 0;
-	goto out_done;
+	return rc;
 
+err_out_slot_buf:
+	pci_pool_free(mvi->dma_pool, slot->buf, slot->buf_dma);
 err_out_tag:
 	mvs_tag_free(mvi, tag);
 err_out:
 
-	dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
-	if (!sas_protocol_ata(t->task_proto))
+	dev_printk(KERN_ERR, mvi->dev, "mvsas prep failed[%d]!\n", rc);
+	if (!sas_protocol_ata(task->task_proto))
 		if (n_elem)
-			dma_unmap_sg(mvi->dev, t->scatter, n_elem,
-				     t->data_dir);
-out_done:
+			dma_unmap_sg(mvi->dev, task->scatter, n_elem,
+				     task->data_dir);
+prep_out:
+	return rc;
+}
+
+static struct mvs_task_list *mvs_task_alloc_list(int *num, gfp_t gfp_flags)
+{
+	struct mvs_task_list *first = NULL;
+
+	for (; *num > 0; --*num) {
+		struct mvs_task_list *mvs_list = kmem_cache_zalloc(mvs_task_list_cache, gfp_flags);
+
+		if (!mvs_list)
+			break;
+
+		INIT_LIST_HEAD(&mvs_list->list);
+		if (!first)
+			first = mvs_list;
+		else
+			list_add_tail(&mvs_list->list, &first->list);
+
+	}
+
+	return first;
+}
+
+static inline void mvs_task_free_list(struct mvs_task_list *mvs_list)
+{
+	LIST_HEAD(list);
+	struct list_head *pos, *a;
+	struct mvs_task_list *mlist = NULL;
+
+	__list_add(&list, mvs_list->list.prev, &mvs_list->list);
+
+	list_for_each_safe(pos, a, &list) {
+		list_del_init(pos);
+		mlist = list_entry(pos, struct mvs_task_list, list);
+		kmem_cache_free(mvs_task_list_cache, mlist);
+	}
+}
+
+static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+				struct completion *completion, int is_tmf,
+				struct mvs_tmf_task *tmf)
+{
+	struct domain_device *dev = task->dev;
+	struct mvs_info *mvi = NULL;
+	u32 rc = 0;
+	u32 pass = 0;
+	unsigned long flags = 0;
+
+	mvi = ((struct mvs_device *)task->dev->lldd_dev)->mvi_info;
+
+	if ((dev->dev_type == SATA_DEV) && (dev->sata_dev.ap != NULL))
+		spin_unlock_irq(dev->sata_dev.ap->lock);
+
+	spin_lock_irqsave(&mvi->lock, flags);
+	rc = mvs_task_prep(task, mvi, is_tmf, tmf, &pass);
+	if (rc)
+		dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
+
+	if (likely(pass))
+			MVS_CHIP_DISP->start_delivery(mvi, (mvi->tx_prod - 1) &
+				(MVS_CHIP_SLOT_SZ - 1));
 	spin_unlock_irqrestore(&mvi->lock, flags);
+
+	if ((dev->dev_type == SATA_DEV) && (dev->sata_dev.ap != NULL))
+		spin_lock_irq(dev->sata_dev.ap->lock);
+
+	return rc;
+}
+
+static int mvs_collector_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+				struct completion *completion, int is_tmf,
+				struct mvs_tmf_task *tmf)
+{
+	struct domain_device *dev = task->dev;
+	struct mvs_prv_info *mpi = dev->port->ha->lldd_ha;
+	struct mvs_info *mvi = NULL;
+	struct sas_task *t = task;
+	struct mvs_task_list *mvs_list = NULL, *a;
+	LIST_HEAD(q);
+	int pass[2] = {0};
+	u32 rc = 0;
+	u32 n = num;
+	unsigned long flags = 0;
+
+	mvs_list = mvs_task_alloc_list(&n, gfp_flags);
+	if (n) {
+		printk(KERN_ERR "%s: mvs alloc list failed.\n", __func__);
+		rc = -ENOMEM;
+		goto free_list;
+	}
+
+	__list_add(&q, mvs_list->list.prev, &mvs_list->list);
+
+	list_for_each_entry(a, &q, list) {
+		a->task = t;
+		t = list_entry(t->list.next, struct sas_task, list);
+	}
+
+	list_for_each_entry(a, &q , list) {
+
+		t = a->task;
+		mvi = ((struct mvs_device *)t->dev->lldd_dev)->mvi_info;
+
+		spin_lock_irqsave(&mvi->lock, flags);
+		rc = mvs_task_prep(t, mvi, is_tmf, tmf, &pass[mvi->id]);
+		if (rc)
+			dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
+		spin_unlock_irqrestore(&mvi->lock, flags);
+	}
+
+	if (likely(pass[0]))
+			MVS_CHIP_DISP->start_delivery(mpi->mvi[0],
+				(mpi->mvi[0]->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+
+	if (likely(pass[1]))
+			MVS_CHIP_DISP->start_delivery(mpi->mvi[1],
+				(mpi->mvi[1]->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+
+	list_del_init(&q);
+
+free_list:
+	if (mvs_list)
+		mvs_task_free_list(mvs_list);
+
 	return rc;
 }
 
 int mvs_queue_command(struct sas_task *task, const int num,
 			gfp_t gfp_flags)
 {
-	return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+	struct mvs_device *mvi_dev = task->dev->lldd_dev;
+	struct sas_ha_struct *sas = mvi_dev->mvi_info->sas;
+
+	if (sas->lldd_max_execute_num < 2)
+		return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+	else
+		return mvs_collector_task_exec(task, num, gfp_flags, NULL, 0, NULL);
 }
 
 static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
@@ -1067,6 +1176,11 @@ static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
 		/* do nothing */
 		break;
 	}
+
+	if (slot->buf) {
+		pci_pool_free(mvi->dma_pool, slot->buf, slot->buf_dma);
+		slot->buf = NULL;
+	}
 	list_del_init(&slot->entry);
 	task->lldd_task = NULL;
 	slot->task = NULL;
@@ -1255,6 +1369,7 @@ static void mvs_port_notify_formed(struct asd_sas_phy *sas_phy, int lock)
 		spin_lock_irqsave(&mvi->lock, flags);
 	port->port_attached = 1;
 	phy->port = port;
+	sas_port->lldd_port = port;
 	if (phy->phy_type & PORT_TYPE_SAS) {
 		port->wide_port_phymap = sas_port->phy_mask;
 		mv_printk("set wide port phy map %x\n", sas_port->phy_mask);
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 77ddc7c1e5f..1367d8b9350 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Red Hat, Inc.
  * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
  *
  * This file is licensed under GPLv2.
  *
@@ -67,6 +68,7 @@ extern struct mvs_tgt_initiator mvs_tgt;
 extern struct mvs_info *tgt_mvi;
 extern const struct mvs_dispatch mvs_64xx_dispatch;
 extern const struct mvs_dispatch mvs_94xx_dispatch;
+extern struct kmem_cache *mvs_task_list_cache;
 
 #define DEV_IS_EXPANDER(type)	\
 	((type == EDGE_DEV) || (type == FANOUT_DEV))
@@ -341,6 +343,7 @@ struct mvs_info {
 	dma_addr_t bulk_buffer_dma;
 #define TRASH_BUCKET_SIZE    	0x20000
 #endif
+	void *dma_pool;
 	struct mvs_slot_info slot_info[0];
 };
 
@@ -367,6 +370,11 @@ struct mvs_task_exec_info {
 	int n_elem;
 };
 
+struct mvs_task_list {
+	struct sas_task *task;
+	struct list_head list;
+};
+
 
 /******************** function prototype *********************/
 void mvs_get_sas_addr(void *buf, u32 buflen);
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 46cc3825638..4b3b4755945 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -2679,7 +2679,7 @@ static	struct script script0 __initdata = {
 }/*-------------------------< RESEL_TAG >-------------------*/,{
 	/*
 	**	Read IDENTIFY + SIMPLE + TAG using a single MOVE.
-	**	Agressive optimization, is'nt it?
+	**	Aggressive optimization, is'nt it?
 	**	No need to test the SIMPLE TAG message, since the 
 	**	driver only supports conformant devices for tags. ;-)
 	*/
@@ -8147,7 +8147,7 @@ static int ncr53c8xx_abort(struct scsi_cmnd *cmd)
 	unsigned long flags;
 	struct scsi_cmnd *done_list;
 
-	printk("ncr53c8xx_abort: command pid %lu\n", cmd->serial_number);
+	printk("ncr53c8xx_abort\n");
 
 	NCR_LOCK_NCB(np, flags);
 
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 6b8b021400f..f6a50c98c36 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1288,7 +1288,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
 			nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx", 
 				    nsp32_read4(base, SAVED_SACK_CNT));
 
-			scsi_set_resid(SCpnt, 0); /* all data transfered! */
+			scsi_set_resid(SCpnt, 0); /* all data transferred! */
 		}
 
 		/*
@@ -1630,7 +1630,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
 
 			/*
 			 * If SAVEDSACKCNT == 0, it means SavedDataPointer is
-			 * come after data transfering.
+			 * come after data transferring.
 			 */
 			if (s_sacklen > 0) {
 				/*
@@ -1785,7 +1785,7 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen
 		   the head element of the sg. restlen is correctly calculated. */
 	}
 
-	/* calculate the rest length for transfering */
+	/* calculate the rest length for transferring */
 	restlen = sentlen - s_sacklen;
 
 	/* update adjusting current SG table entry */
diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h
index 9565acf1aa7..c0221829069 100644
--- a/drivers/scsi/nsp32.h
+++ b/drivers/scsi/nsp32.h
@@ -507,7 +507,7 @@ typedef struct _nsp32_lunt {
 /*
  * SCSI TARGET/LUN definition
  */
-#define NSP32_HOST_SCSIID    7  /* SCSI initiator is everytime defined as 7 */
+#define NSP32_HOST_SCSIID    7  /* SCSI initiator is every time defined as 7 */
 #define MAX_TARGET	     8
 #define MAX_LUN		     8	/* XXX: In SPI3, max number of LUN is 64. */
 
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 521e2182d45..58f5be4740e 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -1366,7 +1366,7 @@ error:
 /* The values below are based on the OnStream frame payload size of 32K == 2**15,
  * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block
  * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions
- * inside each frame. Finaly, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
+ * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
  */
 #define OSST_FRAME_SHIFT  6
 #define OSST_SECTOR_SHIFT 9
@@ -3131,7 +3131,7 @@ static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request **
 		}
 #if DEBUG
 		if (debugging)
-			printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transfering %d bytes in %d lblocks.\n",
+			printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n",
 			  			 name, offset, transfer, blks);
 #endif
 
@@ -3811,7 +3811,7 @@ static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, lo
 
 			if (transfer == 0) {
 				printk(KERN_WARNING
-				  "%s:W: Nothing can be transfered, requested %Zd, tape block size (%d%c).\n",
+				  "%s:W: Nothing can be transferred, requested %Zd, tape block size (%d%c).\n",
 			   		name, count, STp->block_size < 1024?
 					STp->block_size:STp->block_size/1024,
 				       	STp->block_size<1024?'b':'k');
diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h
index 11d26c57f3f..b4fea98ba27 100644
--- a/drivers/scsi/osst.h
+++ b/drivers/scsi/osst.h
@@ -413,7 +413,7 @@ typedef struct os_dat_s {
  * AUX
  */
 typedef struct os_aux_s {
-        __be32          format_id;              /* hardware compability AUX is based on */
+        __be32          format_id;              /* hardware compatibility AUX is based on */
         char            application_sig[4];     /* driver used to write this media */
         __be32          hdwr;                   /* reserved */
         __be32          update_frame_cntr;      /* for configuration frame */
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index be3f33d31a9..54bdf6d85c6 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -742,7 +742,7 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt)
 
 		res = nsp_fifo_count(SCpnt) - ocount;
 		//nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res);
-		if (res == 0) { /* if some data avilable ? */
+		if (res == 0) { /* if some data available ? */
 			if (stat == BUSPHASE_DATA_IN) { /* phase changed? */
 				//nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual);
 				continue;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 18b6c55cd08..8b7db1e53c1 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -339,7 +339,7 @@ update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
 
 /**
  * bar4_shift - function is called to shift BAR base address
- * @pm8001_ha : our hba card infomation
+ * @pm8001_ha : our hba card information
  * @shiftValue : shifting value in memory bar.
  */
 static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
index 833a5201eda..909132041c0 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.h
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -209,7 +209,7 @@ struct  pio_setup_fis {
 
 /*
  * brief the data structure of SATA Completion Response
- * use to discribe the sata task response (64 bytes)
+ * use to describe the sata task response (64 bytes)
  */
 struct sata_completion_resp {
 	__le32	tag;
@@ -951,7 +951,7 @@ struct set_dev_state_resp {
 #define PCIE_EVENT_INTERRUPT		0x003044
 #define PCIE_ERROR_INTERRUPT_ENABLE	0x003048
 #define PCIE_ERROR_INTERRUPT		0x00304C
-/* signature defintion for host scratch pad0 register */
+/* signature definition for host scratch pad0 register */
 #define SPC_SOFT_RESET_SIGNATURE	0x252acbcd
 /* Signature for Soft Reset */
 
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index bdb6b27dedd..aa05e661d11 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -445,7 +445,7 @@ struct fw_control_info {
 struct fw_control_ex {
 	struct fw_control_info *fw_control;
 	void			*buffer;/* keep buffer pointer to be
-	freed when the responce comes*/
+	freed when the response comes*/
 	void			*virtAddr;/* keep virtual address of the data */
 	void			*usrAddr;/* keep virtual address of the
 	user data */
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index bcf858e88c6..7f636b11828 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -213,7 +213,7 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev)
  * pmcraid_slave_configure - Configures a SCSI device
  * @scsi_dev: scsi device struct
  *
- * This fucntion is executed by SCSI mid layer just after a device is first
+ * This function is executed by SCSI mid layer just after a device is first
  * scanned (i.e. it has responded to an INQUIRY). For VSET resources, the
  * timeout value (default 30s) will be over-written to a higher value (60s)
  * and max_sectors value will be over-written to 512. It also sets queue depth
@@ -2122,7 +2122,7 @@ static void pmcraid_fail_outstanding_cmds(struct pmcraid_instance *pinstance)
  *
  * This function executes most of the steps required for IOA reset. This gets
  * called by user threads (modprobe/insmod/rmmod) timer, tasklet and midlayer's
- * 'eh_' thread. Access to variables used for controling the reset sequence is
+ * 'eh_' thread. Access to variables used for controlling the reset sequence is
  * synchronized using host lock. Various functions called during reset process
  * would make use of a single command block, pointer to which is also stored in
  * adapter instance structure.
@@ -2994,7 +2994,7 @@ static int pmcraid_abort_complete(struct pmcraid_cmd *cancel_cmd)
 
 	/* If the abort task is not timed out we will get a Good completion
 	 * as sense_key, otherwise we may get one the following responses
-	 * due to subsquent bus reset or device reset. In case IOASC is
+	 * due to subsequent bus reset or device reset. In case IOASC is
 	 * NR_SYNC_REQUIRED, set sync_reqd flag for the corresponding resource
 	 */
 	if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET ||
@@ -3814,6 +3814,9 @@ static long pmcraid_ioctl_passthrough(
 			rc = -EFAULT;
 			goto out_free_buffer;
 		}
+	} else if (request_size < 0) {
+		rc = -EINVAL;
+		goto out_free_buffer;
 	}
 
 	/* check if we have any additional command parameters */
@@ -3933,7 +3936,7 @@ static long pmcraid_ioctl_passthrough(
 
 			/* if abort task couldn't find the command i.e it got
 			 * completed prior to aborting, return good completion.
-			 * if command got aborted succesfully or there was IOA
+			 * if command got aborted successfully or there was IOA
 			 * reset due to abort task itself getting timedout then
 			 * return -ETIMEDOUT
 			 */
@@ -5932,7 +5935,7 @@ static int __devinit pmcraid_probe(
 	 * However, firmware supports 64-bit streaming DMA buffers, whereas
 	 * coherent buffers are to be 32-bit. Since pci_alloc_consistent always
 	 * returns memory within 4GB (if not, change this logic), coherent
-	 * buffers are within firmware acceptible address ranges.
+	 * buffers are within firmware acceptable address ranges.
 	 */
 	if ((sizeof(dma_addr_t) == 4) ||
 	    pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 4db210d9394..34e4c915002 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -1024,7 +1024,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
 
 
 /*
- * pmcraid_ioctl_header - definition of header structure that preceeds all the
+ * pmcraid_ioctl_header - definition of header structure that precedes all the
  * buffers given as ioctl arguments.
  *
  * .signature           : always ASCII string, "PMCRAID"
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 5dec684bf01..d838205ab16 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -78,7 +78,7 @@
 	- Clean up vchan handling
     Rev  3.23.33 July 3, 2003, Jes Sorensen
 	- Don't define register access macros before define determining MMIO.
-	  This just happend to work out on ia64 but not elsewhere.
+	  This just happened to work out on ia64 but not elsewhere.
 	- Don't try and read from the card while it is in reset as
 	  it won't respond and causes an MCA
     Rev  3.23.32 June 23, 2003, Jes Sorensen
@@ -4066,7 +4066,7 @@ __qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
 	   } */
 	printk("  tag=%d, transfersize=0x%x \n",
 	       cmd->tag, cmd->transfersize);
-	printk("  Pid=%li, SP=0x%p\n", cmd->serial_number, CMD_SP(cmd));
+	printk("  SP=0x%p\n", CMD_SP(cmd));
 	printk(" underflow size = 0x%x, direction=0x%x\n",
 	       cmd->underflow, cmd->sc_data_direction);
 }
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index d3e58d763b4..532313e0725 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -496,8 +496,8 @@ do_read:
 			offset = 0;
 		}
 
-		rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, addr, offset,
-		    SFP_BLOCK_SIZE);
+		rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, ha->sfp_data,
+		    addr, offset, SFP_BLOCK_SIZE, 0);
 		if (rval != QLA_SUCCESS) {
 			qla_printk(KERN_WARNING, ha,
 			    "Unable to read SFP data (%x/%x/%x).\n", rval,
@@ -628,12 +628,12 @@ qla2x00_sysfs_write_edc(struct file *filp, struct kobject *kobj,
 
 	memcpy(ha->edc_data, &buf[8], len);
 
-	rval = qla2x00_write_edc(vha, dev, adr, ha->edc_data_dma,
-	    ha->edc_data, len, opt);
+	rval = qla2x00_write_sfp(vha, ha->edc_data_dma, ha->edc_data,
+	    dev, adr, len, opt);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "Unable to write EDC (%x) %02x:%02x:%04x:%02x:%02x.\n",
-		    rval, dev, adr, opt, len, *buf));
+		    rval, dev, adr, opt, len, buf[8]));
 		return 0;
 	}
 
@@ -685,8 +685,8 @@ qla2x00_sysfs_write_edc_status(struct file *filp, struct kobject *kobj,
 			return -EINVAL;
 
 	memset(ha->edc_data, 0, len);
-	rval = qla2x00_read_edc(vha, dev, adr, ha->edc_data_dma,
-	    ha->edc_data, len, opt);
+	rval = qla2x00_read_sfp(vha, ha->edc_data_dma, ha->edc_data,
+			dev, adr, len, opt);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "Unable to write EDC status (%x) %02x:%02x:%04x:%02x.\n",
@@ -1568,7 +1568,7 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
 
 	/* Now that the rport has been deleted, set the fcport state to
 	   FCS_DEVICE_DEAD */
-	atomic_set(&fcport->state, FCS_DEVICE_DEAD);
+	qla2x00_set_fcport_state(fcport, FCS_DEVICE_DEAD);
 
 	/*
 	 * Transport has effectively 'deleted' the rport, clear
@@ -1877,14 +1877,15 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
 
 	scsi_remove_host(vha->host);
 
+	/* Allow timer to run to drain queued items, when removing vp */
+	qla24xx_deallocate_vp_id(vha);
+
 	if (vha->timer_active) {
 		qla2x00_vp_stop_timer(vha);
 		DEBUG15(printk(KERN_INFO "scsi(%ld): timer for the vport[%d]"
 		" = %p has stopped\n", vha->host_no, vha->vp_idx, vha));
 	}
 
-	qla24xx_deallocate_vp_id(vha);
-
 	/* No pending activities shall be there on the vha now */
 	DEBUG(msleep(random32()%10));  /* Just to see if something falls on
 					* the net we have placed below */
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 903b0586ded..8c10e2c4928 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 074a999c701..0f0f54e35f0 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 09614114825..c53719a9a74 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index b74e6b5743d..930414541ec 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6c51c0a35b9..cc5a79259d3 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -1717,6 +1717,14 @@ typedef struct fc_port {
 #define FCS_DEVICE_LOST		3
 #define FCS_ONLINE		4
 
+static const char * const port_state_str[] = {
+	"Unknown",
+	"UNCONFIGURED",
+	"DEAD",
+	"LOST",
+	"ONLINE"
+};
+
 /*
  * FC port flags.
  */
@@ -2086,7 +2094,7 @@ struct ct_sns_pkt {
 };
 
 /*
- * SNS command structures -- for 2200 compatability.
+ * SNS command structures -- for 2200 compatibility.
  */
 #define	RFT_ID_SNS_SCMD_LEN	22
 #define	RFT_ID_SNS_CMD_SIZE	60
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 6271353e8c5..a5a4e1275bf 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 631fefc8482..691783abfb6 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -416,8 +416,7 @@ struct cmd_type_6 {
 	uint8_t vp_index;
 
 	uint32_t fcp_data_dseg_address[2];	/* Data segment address. */
-	uint16_t fcp_data_dseg_len;		/* Data segment length. */
-	uint16_t reserved_1;			/* MUST be set to 0. */
+	uint32_t fcp_data_dseg_len;		/* Data segment length. */
 };
 
 #define COMMAND_TYPE_7	0x18		/* Command Type 7 entry */
@@ -539,7 +538,7 @@ struct sts_entry_24xx {
 	 * If DIF Error is set in comp_status, these additional fields are
 	 * defined:
 	 * &data[10] : uint8_t report_runt_bg[2];	- computed guard
-	 * &data[12] : uint8_t actual_dif[8];		- DIF Data recieved
+	 * &data[12] : uint8_t actual_dif[8];		- DIF Data received
 	 * &data[20] : uint8_t expected_dif[8];		- DIF Data computed
 	*/
 };
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index d48326ee3f6..0b381224ae4 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -39,6 +39,8 @@ extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
 extern int qla2x00_perform_loop_resync(scsi_qla_host_t *);
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
+extern int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *);
+
 extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
 extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
 
@@ -100,6 +102,8 @@ extern int ql2xgffidenable;
 extern int ql2xenabledif;
 extern int ql2xenablehba_err_chk;
 extern int ql2xtargetreset;
+extern int ql2xdontresethba;
+extern unsigned int ql2xmaxlun;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -319,15 +323,12 @@ extern int
 qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *);
 
 extern int
-qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
-
-extern int
-qla2x00_read_edc(scsi_qla_host_t *, uint16_t, uint16_t, dma_addr_t,
-    uint8_t *, uint16_t, uint16_t);
+qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
+	uint16_t, uint16_t, uint16_t, uint16_t);
 
 extern int
-qla2x00_write_edc(scsi_qla_host_t *, uint16_t, uint16_t, dma_addr_t,
-    uint8_t *, uint16_t, uint16_t);
+qla2x00_write_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
+	uint16_t, uint16_t, uint16_t, uint16_t);
 
 extern int
 qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *);
@@ -549,7 +550,6 @@ extern int qla82xx_wr_32(struct qla_hw_data *, ulong, u32);
 extern int qla82xx_rd_32(struct qla_hw_data *, ulong);
 extern int qla82xx_rdmem(struct qla_hw_data *, u64, void *, int);
 extern int qla82xx_wrmem(struct qla_hw_data *, u64, void *, int);
-extern void qla82xx_rom_unlock(struct qla_hw_data *);
 
 /* ISP 8021 IDC */
 extern void qla82xx_clear_drv_active(struct qla_hw_data *);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 74a91b6dfc6..8cd9066ad90 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 8575808dbae..920b76bfbb9 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -35,8 +35,6 @@ static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
 
 static int qla2x00_restart_isp(scsi_qla_host_t *);
 
-static int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *);
-
 static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
 static int qla84xx_init_chip(scsi_qla_host_t *);
 static int qla25xx_init_queues(struct qla_hw_data *);
@@ -385,8 +383,18 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 
 	switch (data[0]) {
 	case MBS_COMMAND_COMPLETE:
+		/*
+		 * Driver must validate login state - If PRLI not complete,
+		 * force a relogin attempt via implicit LOGO, PLOGI, and PRLI
+		 * requests.
+		 */
+		rval = qla2x00_get_port_database(vha, fcport, 0);
+		if (rval != QLA_SUCCESS) {
+			qla2x00_post_async_logout_work(vha, fcport, NULL);
+			qla2x00_post_async_login_work(vha, fcport, NULL);
+			break;
+		}
 		if (fcport->flags & FCF_FCP2_DEVICE) {
-			fcport->flags |= FCF_ASYNC_SENT;
 			qla2x00_post_async_adisc_work(vha, fcport, data);
 			break;
 		}
@@ -397,7 +405,7 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 		if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
 			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 		else
-			qla2x00_mark_device_lost(vha, fcport, 1, 1);
+			qla2x00_mark_device_lost(vha, fcport, 1, 0);
 		break;
 	case MBS_PORT_ID_USED:
 		fcport->loop_id = data[1];
@@ -409,7 +417,7 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 		rval = qla2x00_find_new_loop_id(vha, fcport);
 		if (rval != QLA_SUCCESS) {
 			fcport->flags &= ~FCF_ASYNC_SENT;
-			qla2x00_mark_device_lost(vha, fcport, 1, 1);
+			qla2x00_mark_device_lost(vha, fcport, 1, 0);
 			break;
 		}
 		qla2x00_post_async_login_work(vha, fcport, NULL);
@@ -441,7 +449,7 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 	if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
 		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 	else
-		qla2x00_mark_device_lost(vha, fcport, 1, 1);
+		qla2x00_mark_device_lost(vha, fcport, 1, 0);
 
 	return;
 }
@@ -2536,7 +2544,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
 	fcport->vp_idx = vha->vp_idx;
 	fcport->port_type = FCT_UNKNOWN;
 	fcport->loop_id = FC_NO_LOOP_ID;
-	atomic_set(&fcport->state, FCS_UNCONFIGURED);
+	qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
 	fcport->supported_classes = FC_COS_UNSPECIFIED;
 
 	return fcport;
@@ -2722,7 +2730,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 			    "loop_id=0x%04x\n",
 			    vha->host_no, fcport->loop_id));
 
-			atomic_set(&fcport->state, FCS_DEVICE_LOST);
+			qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
 		}
 	}
 
@@ -2934,7 +2942,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 	qla2x00_iidma_fcport(vha, fcport);
 	qla24xx_update_fcport_fcp_prio(vha, fcport);
 	qla2x00_reg_remote_port(vha, fcport);
-	atomic_set(&fcport->state, FCS_ONLINE);
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 }
 
 /*
@@ -3391,7 +3399,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
  * Context:
  *	Kernel context.
  */
-static int
+int
 qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
 {
 	int	rval;
@@ -5202,7 +5210,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 	}
 
 	/* Reset Initialization control block */
-	memset(icb, 0, sizeof(struct init_cb_81xx));
+	memset(icb, 0, ha->init_cb_size);
 
 	/* Copy 1st segment. */
 	dptr1 = (uint8_t *)icb;
@@ -5427,6 +5435,13 @@ qla82xx_restart_isp(scsi_qla_host_t *vha)
 		ha->isp_abort_cnt = 0;
 		clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
 
+		/* Update the firmware version */
+		qla2x00_get_fw_version(vha, &ha->fw_major_version,
+		    &ha->fw_minor_version, &ha->fw_subminor_version,
+		    &ha->fw_attributes, &ha->fw_memory_size,
+		    ha->mpi_version, &ha->mpi_capabilities,
+		    ha->phy_version);
+
 		if (ha->fce) {
 			ha->flags.fce_enabled = 1;
 			memset(ha->fce, 0,
@@ -5508,26 +5523,26 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha)
  *
  * Return:
  *	non-zero (if found)
- * 	0 (if not found)
+ *	-1 (if not found)
  *
  * Context:
  * 	Kernel context
  */
-uint8_t
+static int
 qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
 	int i, entries;
 	uint8_t pid_match, wwn_match;
-	uint8_t priority;
+	int priority;
 	uint32_t pid1, pid2;
 	uint64_t wwn1, wwn2;
 	struct qla_fcp_prio_entry *pri_entry;
 	struct qla_hw_data *ha = vha->hw;
 
 	if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled)
-		return 0;
+		return -1;
 
-	priority = 0;
+	priority = -1;
 	entries = ha->fcp_prio_cfg->num_entries;
 	pri_entry = &ha->fcp_prio_cfg->entry[0];
 
@@ -5610,7 +5625,7 @@ int
 qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
 	int ret;
-	uint8_t priority;
+	int priority;
 	uint16_t mb[5];
 
 	if (fcport->port_type != FCT_TARGET ||
@@ -5618,6 +5633,9 @@ qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
 		return QLA_FUNCTION_FAILED;
 
 	priority = qla24xx_get_fcp_prio(vha, fcport);
+	if (priority < 0)
+		return QLA_FUNCTION_FAILED;
+
 	ret = qla24xx_set_fcp_prio(vha, fcport->loop_id, priority, mb);
 	if (ret == QLA_SUCCESS)
 		fcport->fcp_prio = priority;
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 48f97a92e33..4c8167e11f6 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -83,3 +83,22 @@ qla2x00_clean_dsd_pool(struct qla_hw_data *ha, srb_t *sp)
 	}
 	INIT_LIST_HEAD(&((struct crc_context *)sp->ctx)->dsd_list);
 }
+
+static inline void
+qla2x00_set_fcport_state(fc_port_t *fcport, int state)
+{
+	int old_state;
+
+	old_state = atomic_read(&fcport->state);
+	atomic_set(&fcport->state, state);
+
+	/* Don't print state transitions during initial allocation of fcport */
+	if (old_state && old_state != state) {
+		DEBUG(qla_printk(KERN_WARNING, fcport->vha->hw,
+		    "scsi(%ld): FCPort state transitioned from %s to %s - "
+		    "portid=%02x%02x%02x.\n", fcport->vha->host_no,
+		    port_state_str[old_state], port_state_str[state],
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa));
+	}
+}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index d78d5896fc3..7bac3cd109d 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d17ed9a94a0..9c0f0e3389e 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -414,7 +414,7 @@ skip_rio:
 				    "marked OFFLINE!\n");
 				vha->flags.online = 0;
 			} else {
-				/* Check to see if MPI timeout occured */
+				/* Check to see if MPI timeout occurred */
 				if ((mbx & MBX_3) && (ha->flags.port0))
 					set_bit(MPI_RESET_NEEDED,
 					    &vha->dpc_flags);
@@ -843,7 +843,10 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
 		qla_printk(KERN_WARNING, ha,
 		    "Invalid SCSI completion handle %d.\n", index);
 
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		return;
 	}
 
@@ -861,7 +864,10 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
 		qla_printk(KERN_WARNING, ha,
 		    "Invalid ISP SCSI completion handle\n");
 
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 	}
 }
 
@@ -878,7 +884,10 @@ qla2x00_get_sp_from_handle(scsi_qla_host_t *vha, const char *func,
 	if (index >= MAX_OUTSTANDING_COMMANDS) {
 		qla_printk(KERN_WARNING, ha,
 		    "%s: Invalid completion handle (%x).\n", func, index);
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		goto done;
 	}
 	sp = req->outstanding_cmds[index];
@@ -1564,7 +1573,10 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		    "scsi(%ld): Invalid status handle (0x%x).\n", vha->host_no,
 		    sts->handle);
 
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		qla2xxx_wake_dpc(vha);
 		return;
 	}
@@ -1794,12 +1806,13 @@ out:
 	if (logit)
 		DEBUG2(qla_printk(KERN_INFO, ha,
 		    "scsi(%ld:%d:%d) FCP command status: 0x%x-0x%x (0x%x) "
-		    "oxid=0x%x cdb=%02x%02x%02x len=0x%x "
+		    "portid=%02x%02x%02x oxid=0x%x cdb=%02x%02x%02x len=0x%x "
 		    "rsp_info=0x%x resid=0x%x fw_resid=0x%x\n", vha->host_no,
 		    cp->device->id, cp->device->lun, comp_status, scsi_status,
-		    cp->result, ox_id, cp->cmnd[0],
-		    cp->cmnd[1], cp->cmnd[2], scsi_bufflen(cp), rsp_info_len,
-		    resid_len, fw_resid_len));
+		    cp->result, fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa, ox_id, cp->cmnd[0], cp->cmnd[1],
+		    cp->cmnd[2], scsi_bufflen(cp), rsp_info_len, resid_len,
+		    fw_resid_len));
 
 	if (rsp->status_srb == NULL)
 		qla2x00_sp_compl(ha, sp);
@@ -1908,13 +1921,17 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
 		qla2x00_sp_compl(ha, sp);
 
 	} else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type ==
-	    COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7) {
+		COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7
+		|| pkt->entry_type == COMMAND_TYPE_6) {
 		DEBUG2(printk("scsi(%ld): Error entry - invalid handle\n",
-		    vha->host_no));
+			vha->host_no));
 		qla_printk(KERN_WARNING, ha,
-		    "Error entry - invalid handle\n");
+			"Error entry - invalid handle\n");
 
-		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha))
+			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
+		else
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		qla2xxx_wake_dpc(vha);
 	}
 }
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7a7c0ecfe7d..c26f0acdfec 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -303,7 +303,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			    !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
 
 				qla_printk(KERN_WARNING, ha,
-				    "Mailbox command timeout occured. "
+				    "Mailbox command timeout occurred. "
 				    "Scheduling ISP " "abort. eeh_busy: 0x%x\n",
 				    ha->flags.eeh_busy);
 				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
@@ -321,7 +321,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			    !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
 
 				qla_printk(KERN_WARNING, ha,
-				    "Mailbox command timeout occured. "
+				    "Mailbox command timeout occurred. "
 				    "Issuing ISP abort.\n");
 
 				set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
@@ -1261,11 +1261,12 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
 		/* Check for logged in state. */
 		if (pd24->current_login_state != PDS_PRLI_COMPLETE &&
 		    pd24->last_login_state != PDS_PRLI_COMPLETE) {
-			DEBUG2(printk("%s(%ld): Unable to verify "
-			    "login-state (%x/%x) for loop_id %x\n",
-			    __func__, vha->host_no,
-			    pd24->current_login_state,
-			    pd24->last_login_state, fcport->loop_id));
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			   "scsi(%ld): Unable to verify login-state (%x/%x) "
+			   " - portid=%02x%02x%02x.\n", vha->host_no,
+			   pd24->current_login_state, pd24->last_login_state,
+			   fcport->d_id.b.domain, fcport->d_id.b.area,
+			   fcport->d_id.b.al_pa));
 			rval = QLA_FUNCTION_FAILED;
 			goto gpd_error_out;
 		}
@@ -1289,6 +1290,12 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
 		/* Check for logged in state. */
 		if (pd->master_state != PD_STATE_PORT_LOGGED_IN &&
 		    pd->slave_state != PD_STATE_PORT_LOGGED_IN) {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			   "scsi(%ld): Unable to verify login-state (%x/%x) "
+			   " - portid=%02x%02x%02x.\n", vha->host_no,
+			   pd->master_state, pd->slave_state,
+			   fcport->d_id.b.domain, fcport->d_id.b.area,
+			   fcport->d_id.b.al_pa));
 			rval = QLA_FUNCTION_FAILED;
 			goto gpd_error_out;
 		}
@@ -1883,7 +1890,8 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
 	lg->handle = MAKE_HANDLE(req->id, lg->handle);
 	lg->nport_handle = cpu_to_le16(loop_id);
 	lg->control_flags =
-	    __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
+	    __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO|
+		LCF_FREE_NPORT);
 	lg->port_id[0] = al_pa;
 	lg->port_id[1] = area;
 	lg->port_id[2] = domain;
@@ -2362,7 +2370,7 @@ qla24xx_abort_command(srb_t *sp)
 	abt->entry_count = 1;
 	abt->handle = MAKE_HANDLE(req->id, abt->handle);
 	abt->nport_handle = cpu_to_le16(fcport->loop_id);
-	abt->handle_to_abort = handle;
+	abt->handle_to_abort = MAKE_HANDLE(req->id, handle);
 	abt->port_id[0] = fcport->d_id.b.al_pa;
 	abt->port_id[1] = fcport->d_id.b.area;
 	abt->port_id[2] = fcport->d_id.b.domain;
@@ -2779,44 +2787,6 @@ qla2x00_disable_fce_trace(scsi_qla_host_t *vha, uint64_t *wr, uint64_t *rd)
 }
 
 int
-qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint16_t addr,
-    uint16_t off, uint16_t count)
-{
-	int rval;
-	mbx_cmd_t mc;
-	mbx_cmd_t *mcp = &mc;
-
-	if (!IS_FWI2_CAPABLE(vha->hw))
-		return QLA_FUNCTION_FAILED;
-
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
-
-	mcp->mb[0] = MBC_READ_SFP;
-	mcp->mb[1] = addr;
-	mcp->mb[2] = MSW(sfp_dma);
-	mcp->mb[3] = LSW(sfp_dma);
-	mcp->mb[6] = MSW(MSD(sfp_dma));
-	mcp->mb[7] = LSW(MSD(sfp_dma));
-	mcp->mb[8] = count;
-	mcp->mb[9] = off;
-	mcp->mb[10] = 0;
-	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_0;
-	mcp->tov = MBX_TOV_SECONDS;
-	mcp->flags = 0;
-	rval = qla2x00_mailbox_command(vha, mcp);
-
-	if (rval != QLA_SUCCESS) {
-		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
-		    vha->host_no, rval, mcp->mb[0]));
-	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
-	}
-
-	return rval;
-}
-
-int
 qla2x00_get_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id,
 	uint16_t *port_speed, uint16_t *mb)
 {
@@ -3581,15 +3551,22 @@ qla81xx_restart_mpi_firmware(scsi_qla_host_t *vha)
 }
 
 int
-qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
-    dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
+	uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
 {
 	int rval;
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_FWI2_CAPABLE(ha))
+		return QLA_FUNCTION_FAILED;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+	if (len == 1)
+		opt |= BIT_0;
+
 	mcp->mb[0] = MBC_READ_SFP;
 	mcp->mb[1] = dev;
 	mcp->mb[2] = MSW(sfp_dma);
@@ -3597,17 +3574,16 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 	mcp->mb[6] = MSW(MSD(sfp_dma));
 	mcp->mb[7] = LSW(MSD(sfp_dma));
 	mcp->mb[8] = len;
-	mcp->mb[9] = adr;
+	mcp->mb[9] = off;
 	mcp->mb[10] = opt;
 	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 
 	if (opt & BIT_0)
-		if (sfp)
-			*sfp = mcp->mb[8];
+		*sfp = mcp->mb[1];
 
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
@@ -3620,18 +3596,24 @@ qla2x00_read_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 }
 
 int
-qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
-    dma_addr_t sfp_dma, uint8_t *sfp, uint16_t len, uint16_t opt)
+qla2x00_write_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint8_t *sfp,
+	uint16_t dev, uint16_t off, uint16_t len, uint16_t opt)
 {
 	int rval;
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_FWI2_CAPABLE(ha))
+		return QLA_FUNCTION_FAILED;
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
+	if (len == 1)
+		opt |= BIT_0;
+
 	if (opt & BIT_0)
-		if (sfp)
-			len = *sfp;
+		len = *sfp;
 
 	mcp->mb[0] = MBC_WRITE_SFP;
 	mcp->mb[1] = dev;
@@ -3640,10 +3622,10 @@ qla2x00_write_edc(scsi_qla_host_t *vha, uint16_t dev, uint16_t adr,
 	mcp->mb[6] = MSW(MSD(sfp_dma));
 	mcp->mb[7] = LSW(MSD(sfp_dma));
 	mcp->mb[8] = len;
-	mcp->mb[9] = adr;
+	mcp->mb[9] = off;
 	mcp->mb[10] = opt;
 	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
@@ -3789,7 +3771,7 @@ qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq,
 	mcp->mb[20] = LSW(MSD(mreq->send_dma));
 	mcp->mb[21] = MSW(MSD(mreq->send_dma));
 
-	/* recieve data address */
+	/* receive data address */
 	mcp->mb[16] = LSW(mreq->rcv_dma);
 	mcp->mb[17] = MSW(mreq->rcv_dma);
 	mcp->mb[6] = LSW(MSD(mreq->rcv_dma));
@@ -4160,63 +4142,32 @@ int
 qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp, uint16_t *frac)
 {
 	int rval;
-	mbx_cmd_t mc;
-	mbx_cmd_t *mcp = &mc;
+	uint8_t byte;
 	struct qla_hw_data *ha = vha->hw;
 
-	DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, ha->host_no));
+	DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no));
 
-	/* High bits. */
-	mcp->mb[0] = MBC_READ_SFP;
-	mcp->mb[1] = 0x98;
-	mcp->mb[2] = 0;
-	mcp->mb[3] = 0;
-	mcp->mb[6] = 0;
-	mcp->mb[7] = 0;
-	mcp->mb[8] = 1;
-	mcp->mb[9] = 0x01;
-	mcp->mb[10] = BIT_13|BIT_0;
-	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_1|MBX_0;
-	mcp->tov = MBX_TOV_SECONDS;
-	mcp->flags = 0;
-	rval = qla2x00_mailbox_command(vha, mcp);
+	/* Integer part */
+	rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x01, 1, BIT_13|BIT_0);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk(KERN_WARNING
-		    "%s(%ld): failed=%x (%x).\n", __func__,
-		    vha->host_no, rval, mcp->mb[0]));
+		    "%s(%ld): failed=%x.\n", __func__, vha->host_no, rval));
 		ha->flags.thermal_supported = 0;
 		goto fail;
 	}
-	*temp = mcp->mb[1] & 0xFF;
+	*temp = byte;
 
-	/* Low bits. */
-	mcp->mb[0] = MBC_READ_SFP;
-	mcp->mb[1] = 0x98;
-	mcp->mb[2] = 0;
-	mcp->mb[3] = 0;
-	mcp->mb[6] = 0;
-	mcp->mb[7] = 0;
-	mcp->mb[8] = 1;
-	mcp->mb[9] = 0x10;
-	mcp->mb[10] = BIT_13|BIT_0;
-	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
-	mcp->in_mb = MBX_1|MBX_0;
-	mcp->tov = MBX_TOV_SECONDS;
-	mcp->flags = 0;
-	rval = qla2x00_mailbox_command(vha, mcp);
+	/* Fraction part */
+	rval = qla2x00_read_sfp(vha, 0, &byte, 0x98, 0x10, 1, BIT_13|BIT_0);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk(KERN_WARNING
-		    "%s(%ld): failed=%x (%x).\n", __func__,
-		    vha->host_no, rval, mcp->mb[0]));
+		    "%s(%ld): failed=%x.\n", __func__, vha->host_no, rval));
 		ha->flags.thermal_supported = 0;
 		goto fail;
 	}
-	*frac = ((mcp->mb[1] & 0xFF) >> 6) * 25;
+	*frac = (byte >> 6) * 25;
 
-	if (rval == QLA_SUCCESS)
-		DEBUG11(printk(KERN_INFO
-		    "%s(%ld): done.\n", __func__, ha->host_no));
+	DEBUG11(printk(KERN_INFO "%s(%ld): done.\n", __func__, vha->host_no));
 fail:
 	return rval;
 }
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 2b69392a71a..5e343919aca 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -136,7 +136,7 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
 		    vha->host_no, fcport->loop_id, fcport->vp_idx));
 
 		qla2x00_mark_device_lost(vha, fcport, 0, 0);
-		atomic_set(&fcport->state, FCS_UNCONFIGURED);
+		qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
 	}
 }
 
@@ -456,7 +456,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	else
 		host->max_cmd_len = MAX_CMDSZ;
 	host->max_channel = MAX_BUSES - 1;
-	host->max_lun = MAX_LUNS;
+	host->max_lun = ql2xmaxlun;
 	host->unique_id = host->host_no;
 	host->max_id = MAX_TARGETS_2200;
 	host->transportt = qla2xxx_transport_vport_template;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 76ec876e6b2..e1138bcc834 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -844,6 +844,12 @@ qla82xx_rom_lock(struct qla_hw_data *ha)
 	return 0;
 }
 
+static void
+qla82xx_rom_unlock(struct qla_hw_data *ha)
+{
+	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+}
+
 static int
 qla82xx_wait_rom_busy(struct qla_hw_data *ha)
 {
@@ -924,7 +930,7 @@ qla82xx_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp)
 		return -1;
 	}
 	ret = qla82xx_do_rom_fast_read(ha, addr, valp);
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -1056,7 +1062,7 @@ qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr,
 	ret = qla82xx_flash_wait_write_finish(ha);
 
 done_write:
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -1081,12 +1087,26 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	/* Halt all the indiviual PEGs and other blocks of the ISP */
 	qla82xx_rom_lock(ha);
 
-	/* mask all niu interrupts */
+	/* disable all I2Q */
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x10, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x14, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x18, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x1c, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x20, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_I2Q + 0x24, 0x0);
+
+	/* disable all niu interrupts */
 	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x40, 0xff);
 	/* disable xge rx/tx */
 	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x70000, 0x00);
 	/* disable xg1 rx/tx */
 	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x80000, 0x00);
+	/* disable sideband mac */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x90000, 0x00);
+	/* disable ap0 mac */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0xa0000, 0x00);
+	/* disable ap1 mac */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0xb0000, 0x00);
 
 	/* halt sre */
 	val = qla82xx_rd_32(ha, QLA82XX_CRB_SRE + 0x1000);
@@ -1101,6 +1121,7 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x10, 0x0);
 	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x18, 0x0);
 	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x100, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x200, 0x0);
 
 	/* halt pegs */
 	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c, 1);
@@ -1108,9 +1129,9 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c, 1);
 	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c, 1);
 	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c, 1);
+	msleep(20);
 
 	/* big hammer */
-	msleep(1000);
 	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
 		/* don't reset CAM block on reset */
 		qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
@@ -1129,7 +1150,7 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 	qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
 	msleep(20);
 
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 
 	/* Read the signature value from the flash.
 	 * Offset 0: Contain signature (0xcafecafe)
@@ -2395,9 +2416,13 @@ qla82xx_load_fw(scsi_qla_host_t *vha)
 
 	if (qla82xx_fw_load_from_flash(ha) == QLA_SUCCESS) {
 		qla_printk(KERN_ERR, ha,
-			"Firmware loaded successfully from flash\n");
+		    "Firmware loaded successfully from flash\n");
 		return QLA_SUCCESS;
+	} else {
+		qla_printk(KERN_ERR, ha,
+		    "Firmware load from flash failed\n");
 	}
+
 try_blob_fw:
 	qla_printk(KERN_INFO, ha,
 	    "Attempting to load firmware from blob\n");
@@ -2548,11 +2573,11 @@ qla2xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt,
 			dsd_seg = (uint32_t *)&cmd_pkt->fcp_data_dseg_address;
 			*dsd_seg++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
 			*dsd_seg++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
-			cmd_pkt->fcp_data_dseg_len = dsd_list_len;
+			*dsd_seg++ = cpu_to_le32(dsd_list_len);
 		} else {
 			*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
 			*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
-			*cur_dsd++ = dsd_list_len;
+			*cur_dsd++ = cpu_to_le32(dsd_list_len);
 		}
 		cur_dsd = (uint32_t *)next_dsd;
 		while (avail_dsds) {
@@ -2598,7 +2623,7 @@ qla82xx_calc_dsd_lists(uint16_t dsds)
  * qla82xx_start_scsi() - Send a SCSI command to the ISP
  * @sp: command to send to the ISP
  *
- * Returns non-zero if a failure occured, else zero.
+ * Returns non-zero if a failure occurred, else zero.
  */
 int
 qla82xx_start_scsi(srb_t *sp)
@@ -2991,7 +3016,7 @@ qla82xx_unprotect_flash(struct qla_hw_data *ha)
 		qla_printk(KERN_WARNING, ha, "Write disable failed\n");
 
 done_unprotect:
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -3020,7 +3045,7 @@ qla82xx_protect_flash(struct qla_hw_data *ha)
 	if (qla82xx_write_disable_flash(ha) != 0)
 		qla_printk(KERN_WARNING, ha, "Write disable failed\n");
 done_protect:
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -3048,7 +3073,7 @@ qla82xx_erase_sector(struct qla_hw_data *ha, int addr)
 	}
 	ret = qla82xx_flash_wait_write_finish(ha);
 done:
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 	return ret;
 }
 
@@ -3228,7 +3253,7 @@ void qla82xx_rom_lock_recovery(struct qla_hw_data *ha)
 	 * else died while holding it.
 	 * In either case, unlock.
 	 */
-	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
+	qla82xx_rom_unlock(ha);
 }
 
 /*
@@ -3528,15 +3553,18 @@ int
 qla82xx_device_state_handler(scsi_qla_host_t *vha)
 {
 	uint32_t dev_state;
+	uint32_t old_dev_state;
 	int rval = QLA_SUCCESS;
 	unsigned long dev_init_timeout;
 	struct qla_hw_data *ha = vha->hw;
+	int loopcount = 0;
 
 	qla82xx_idc_lock(ha);
 	if (!vha->flags.init_done)
 		qla82xx_set_drv_active(vha);
 
 	dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+	old_dev_state = dev_state;
 	qla_printk(KERN_INFO, ha, "1:Device state is 0x%x = %s\n", dev_state,
 		dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown");
 
@@ -3553,10 +3581,16 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			break;
 		}
 		dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
-		qla_printk(KERN_INFO, ha,
-			"2:Device state is 0x%x = %s\n", dev_state,
-			dev_state < MAX_STATES ?
-			qdev_state[dev_state] : "Unknown");
+		if (old_dev_state != dev_state) {
+			loopcount = 0;
+			old_dev_state = dev_state;
+		}
+		if (loopcount < 5) {
+			qla_printk(KERN_INFO, ha,
+			    "2:Device state is 0x%x = %s\n", dev_state,
+			    dev_state < MAX_STATES ?
+			    qdev_state[dev_state] : "Unknown");
+		}
 
 		switch (dev_state) {
 		case QLA82XX_DEV_READY:
@@ -3570,6 +3604,7 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			qla82xx_idc_lock(ha);
 			break;
 		case QLA82XX_DEV_NEED_RESET:
+		    if (!ql2xdontresethba)
 			qla82xx_need_reset_handler(vha);
 			dev_init_timeout = jiffies +
 				(ha->nx_dev_init_timeout * HZ);
@@ -3604,6 +3639,7 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			msleep(1000);
 			qla82xx_idc_lock(ha);
 		}
+		loopcount++;
 	}
 exit:
 	qla82xx_idc_unlock(ha);
@@ -3621,7 +3657,8 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 		if (dev_state == QLA82XX_DEV_NEED_RESET &&
 		    !test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) {
 			qla_printk(KERN_WARNING, ha,
-			    "%s(): Adapter reset needed!\n", __func__);
+			    "scsi(%ld) %s: Adapter reset needed!\n",
+				vha->host_no, __func__);
 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
 		} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
@@ -3632,10 +3669,27 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 			set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
 		} else {
-			qla82xx_check_fw_alive(vha);
 			if (qla82xx_check_fw_alive(vha)) {
 				halt_status = qla82xx_rd_32(ha,
 				    QLA82XX_PEG_HALT_STATUS1);
+				qla_printk(KERN_INFO, ha,
+				    "scsi(%ld): %s, Dumping hw/fw registers:\n "
+				    " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n "
+				    " PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n "
+				    " PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n "
+				    " PEG_NET_4_PC: 0x%x\n",
+				    vha->host_no, __func__, halt_status,
+				    qla82xx_rd_32(ha, QLA82XX_PEG_HALT_STATUS2),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_0 + 0x3c),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_1 + 0x3c),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_2 + 0x3c),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_3 + 0x3c),
+				    qla82xx_rd_32(ha,
+					    QLA82XX_CRB_PEG_NET_4 + 0x3c));
 				if (halt_status & HALT_STATUS_UNRECOVERABLE) {
 					set_bit(ISP_UNRECOVERABLE,
 					    &vha->dpc_flags);
@@ -3651,8 +3705,9 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 				if (ha->flags.mbox_busy) {
 					ha->flags.mbox_int = 1;
 					DEBUG2(qla_printk(KERN_ERR, ha,
-					    "Due to fw hung, doing premature "
-					    "completion of mbx command\n"));
+					    "scsi(%ld) Due to fw hung, doing "
+					    "premature completion of mbx "
+					    "command\n", vha->host_no));
 					if (test_bit(MBX_INTR_WAIT,
 					    &ha->mbx_cmd_flags))
 						complete(&ha->mbx_intr_comp);
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index ed5883f1778..8a21832c669 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 75a966c9486..f461925a9df 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -164,6 +164,20 @@ module_param(ql2xasynctmfenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xasynctmfenable,
 		"Enables issue of TM IOCBs asynchronously via IOCB mechanism"
 		"Default is 0 - Issue TM IOCBs via mailbox mechanism.");
+
+int ql2xdontresethba;
+module_param(ql2xdontresethba, int, S_IRUGO);
+MODULE_PARM_DESC(ql2xdontresethba,
+	"Option to specify reset behaviour\n"
+	" 0 (Default) -- Reset on failure.\n"
+	" 1 -- Do not reset on failure.\n");
+
+uint ql2xmaxlun = MAX_LUNS;
+module_param(ql2xmaxlun, uint, S_IRUGO);
+MODULE_PARM_DESC(ql2xmaxlun,
+		"Defines the maximum LU number to register with the SCSI "
+		"midlayer. Default is 65535.");
+
 /*
  * SCSI host template entry points
  */
@@ -528,7 +542,7 @@ qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
 static int
 qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 {
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+	scsi_qla_host_t *vha = shost_priv(host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 	struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 	struct qla_hw_data *ha = vha->hw;
@@ -1046,7 +1060,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 
 eh_bus_reset_done:
 	qla_printk(KERN_INFO, vha->hw, "%s: reset %s\n", __func__,
-	    (ret == FAILED) ? "failed" : "succeded");
+	    (ret == FAILED) ? "failed" : "succeeded");
 
 	return ret;
 }
@@ -1136,7 +1150,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 
 eh_host_reset_lock:
 	qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
-	    (ret == FAILED) ? "failed" : "succeded");
+	    (ret == FAILED) ? "failed" : "succeeded");
 
 	return ret;
 }
@@ -2128,7 +2142,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		host->max_cmd_len = MAX_CMDSZ;
 	host->max_channel = MAX_BUSES - 1;
-	host->max_lun = MAX_LUNS;
+	host->max_lun = ql2xmaxlun;
 	host->transportt = qla2xxx_transport_template;
 	sht->vendor_id = (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC);
 
@@ -2360,21 +2374,26 @@ qla2x00_remove_one(struct pci_dev *pdev)
 	base_vha = pci_get_drvdata(pdev);
 	ha = base_vha->hw;
 
-	spin_lock_irqsave(&ha->vport_slock, flags);
-	list_for_each_entry(vha, &ha->vp_list, list) {
-		atomic_inc(&vha->vref_count);
+	mutex_lock(&ha->vport_lock);
+	while (ha->cur_vport_count) {
+		struct Scsi_Host *scsi_host;
 
-		if (vha->fc_vport) {
-			spin_unlock_irqrestore(&ha->vport_slock, flags);
+		spin_lock_irqsave(&ha->vport_slock, flags);
 
-			fc_vport_terminate(vha->fc_vport);
+		BUG_ON(base_vha->list.next == &ha->vp_list);
+		/* This assumes first entry in ha->vp_list is always base vha */
+		vha = list_first_entry(&base_vha->list, scsi_qla_host_t, list);
+		scsi_host = scsi_host_get(vha->host);
 
-			spin_lock_irqsave(&ha->vport_slock, flags);
-		}
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
+		mutex_unlock(&ha->vport_lock);
+
+		fc_vport_terminate(vha->fc_vport);
+		scsi_host_put(vha->host);
 
-		atomic_dec(&vha->vref_count);
+		mutex_lock(&ha->vport_lock);
 	}
-	spin_unlock_irqrestore(&ha->vport_slock, flags);
+	mutex_unlock(&ha->vport_lock);
 
 	set_bit(UNLOADING, &base_vha->dpc_flags);
 
@@ -2544,7 +2563,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,
 {
 	if (atomic_read(&fcport->state) == FCS_ONLINE &&
 	    vha->vp_idx == fcport->vp_idx) {
-		atomic_set(&fcport->state, FCS_DEVICE_LOST);
+		qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
 		qla2x00_schedule_rport_del(vha, fcport, defer);
 	}
 	/*
@@ -2552,7 +2571,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,
 	 * port but do the retries.
 	 */
 	if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
-		atomic_set(&fcport->state, FCS_DEVICE_LOST);
+		qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
 
 	if (!do_login)
 		return;
@@ -2607,7 +2626,7 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha, int defer)
 		if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
 			continue;
 		if (atomic_read(&fcport->state) == FCS_ONLINE) {
-			atomic_set(&fcport->state, FCS_DEVICE_LOST);
+			qla2x00_set_fcport_state(fcport, FCS_DEVICE_LOST);
 			if (defer)
 				qla2x00_schedule_rport_del(vha, fcport, defer);
 			else if (vha->vp_idx == fcport->vp_idx)
@@ -3214,6 +3233,17 @@ void qla2x00_relogin(struct scsi_qla_host *vha)
 							fcport->d_id.b.area,
 							fcport->d_id.b.al_pa);
 
+				if (fcport->loop_id == FC_NO_LOOP_ID) {
+					fcport->loop_id = next_loopid =
+					    ha->min_external_loopid;
+					status = qla2x00_find_new_loop_id(
+					    vha, fcport);
+					if (status != QLA_SUCCESS) {
+						/* Ran out of IDs to use */
+						break;
+					}
+				}
+
 				if (IS_ALOGIO_CAPABLE(ha)) {
 					fcport->flags |= FCF_ASYNC_SENT;
 					data[0] = 0;
@@ -3604,7 +3634,8 @@ qla2x00_timer(scsi_qla_host_t *vha)
 	if (!pci_channel_offline(ha->pdev))
 		pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
 
-	if (IS_QLA82XX(ha)) {
+	/* Make sure qla82xx_watchdog is run only for physical port */
+	if (!vha->vp_idx && IS_QLA82XX(ha)) {
 		if (test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags))
 			start_dpc++;
 		qla82xx_watchdog(vha);
@@ -3612,7 +3643,8 @@ qla2x00_timer(scsi_qla_host_t *vha)
 
 	/* Loop down handler. */
 	if (atomic_read(&vha->loop_down_timer) > 0 &&
-	    !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
+	    !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) &&
+	    !(test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags))
 		&& vha->flags.online) {
 
 		if (atomic_read(&vha->loop_down_timer) ==
@@ -3648,7 +3680,11 @@ qla2x00_timer(scsi_qla_host_t *vha)
 					if (!(sfcp->flags & FCF_FCP2_DEVICE))
 						continue;
 
-					set_bit(ISP_ABORT_NEEDED,
+					if (IS_QLA82XX(ha))
+						set_bit(FCOE_CTX_RESET_NEEDED,
+							&vha->dpc_flags);
+					else
+						set_bit(ISP_ABORT_NEEDED,
 							&vha->dpc_flags);
 					break;
 				}
@@ -3667,7 +3703,12 @@ qla2x00_timer(scsi_qla_host_t *vha)
 				qla_printk(KERN_WARNING, ha,
 				    "Loop down - aborting ISP.\n");
 
-				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+				if (IS_QLA82XX(ha))
+					set_bit(FCOE_CTX_RESET_NEEDED,
+						&vha->dpc_flags);
+				else
+					set_bit(ISP_ABORT_NEEDED,
+						&vha->dpc_flags);
 			}
 		}
 		DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
@@ -3675,8 +3716,8 @@ qla2x00_timer(scsi_qla_host_t *vha)
 		    atomic_read(&vha->loop_down_timer)));
 	}
 
-	/* Check if beacon LED needs to be blinked */
-	if (ha->beacon_blink_led == 1) {
+	/* Check if beacon LED needs to be blinked for physical host only */
+	if (!vha->vp_idx && (ha->beacon_blink_led == 1)) {
 		set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags);
 		start_dpc++;
 	}
@@ -3902,7 +3943,7 @@ uint32_t qla82xx_error_recovery(scsi_qla_host_t *base_vha)
 			continue;
 		if (atomic_read(&other_pdev->enable_cnt)) {
 			DEBUG17(qla_printk(KERN_INFO, ha,
-			    "Found PCI func availabe and enabled at 0x%x\n",
+			    "Found PCI func available and enabled at 0x%x\n",
 			    fn));
 			pci_dev_put(other_pdev);
 			break;
diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h
index f0b2b9986a5..d70f0300898 100644
--- a/drivers/scsi/qla2xxx/qla_settings.h
+++ b/drivers/scsi/qla2xxx/qla_settings.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 22070621206..693647661ed 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 3a260c3f055..062c97bf62f 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -1,15 +1,15 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2010 QLogic Corporation
+ * Copyright (c)  2003-2011 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.07.00"
+#define QLA2XXX_VERSION      "8.03.07.03-k"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
 #define QLA_DRIVER_PATCH_VER	7
-#define QLA_DRIVER_BETA_VER	0
+#define QLA_DRIVER_BETA_VER	3
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index c1f8d1b150f..4757878d59d 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -182,7 +182,7 @@ struct srb {
 	uint16_t flags;		/* (1) Status flags. */
 
 #define SRB_DMA_VALID		BIT_3	/* DMA Buffer mapped. */
-#define SRB_GOT_SENSE		BIT_4	/* sense data recieved. */
+#define SRB_GOT_SENSE		BIT_4	/* sense data received. */
 	uint8_t state;		/* (1) Status flags. */
 
 #define SRB_NO_QUEUE_STATE	 0	/* Request is in between states */
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index bbb2e903d38..48e2241ddaf 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -1338,7 +1338,7 @@ exit_init_hba:
 	}
 
 	DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no,
-	    status == QLA_ERROR ? "FAILED" : "SUCCEDED"));
+	    status == QLA_ERROR ? "FAILED" : "SUCCEEDED"));
 	return status;
 }
 
diff --git a/drivers/scsi/qla4xxx/ql4_nvram.h b/drivers/scsi/qla4xxx/ql4_nvram.h
index b3831bd2947..945cc328f57 100644
--- a/drivers/scsi/qla4xxx/ql4_nvram.h
+++ b/drivers/scsi/qla4xxx/ql4_nvram.h
@@ -28,7 +28,7 @@
 #define	 FM93C56A_ERASE	      0x3
 #define	 FM93C56A_ERASE_ALL   0x0
 
-/* Command Extentions */
+/* Command Extensions */
 #define	 FM93C56A_WEN_EXT	 0x3
 #define	 FM93C56A_WRITE_ALL_EXT	 0x1
 #define	 FM93C56A_WDS_EXT	 0x0
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index a4acb0dd7be..c22f2a764d9 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -1213,7 +1213,7 @@ recover_ha_init_adapter:
 
 	clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
 	DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no,
-	    status == QLA_ERROR ? "FAILED" : "SUCCEDED"));
+	    status == QLA_ERROR ? "FAILED" : "SUCCEEDED"));
 
 	return status;
 }
@@ -2068,15 +2068,14 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
 	unsigned int id = cmd->device->id;
 	unsigned int lun = cmd->device->lun;
-	unsigned long serial = cmd->serial_number;
 	unsigned long flags;
 	struct srb *srb = NULL;
 	int ret = SUCCESS;
 	int wait = 0;
 
 	ql4_printk(KERN_INFO, ha,
-	    "scsi%ld:%d:%d: Abort command issued cmd=%p, pid=%ld\n",
-	    ha->host_no, id, lun, cmd, serial);
+	    "scsi%ld:%d:%d: Abort command issued cmd=%p\n",
+	    ha->host_no, id, lun, cmd);
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	srb = (struct srb *) CMD_SP(cmd);
@@ -2110,7 +2109,7 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
 
 	ql4_printk(KERN_INFO, ha,
 	    "scsi%ld:%d:%d: Abort command - %s\n",
-	    ha->host_no, id, lun, (ret == SUCCESS) ? "succeded" : "failed");
+	    ha->host_no, id, lun, (ret == SUCCESS) ? "succeeded" : "failed");
 
 	return ret;
 }
@@ -2278,7 +2277,7 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
 		return_status = SUCCESS;
 
 	ql4_printk(KERN_INFO, ha, "HOST RESET %s.\n",
-		   return_status == FAILED ? "FAILED" : "SUCCEDED");
+		   return_status == FAILED ? "FAILED" : "SUCCEEDED");
 
 	return return_status;
 }
@@ -2492,7 +2491,7 @@ qla4xxx_pci_slot_reset(struct pci_dev *pdev)
 	/* Initialize device or resume if in suspended state */
 	rc = pci_enable_device(pdev);
 	if (rc) {
-		ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cant re-enable "
+		ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Can't re-enable "
 		    "device after reset\n", ha->host_no, __func__);
 		goto exit_slot_reset;
 	}
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index e2d45c91b8e..9689d41c788 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -1292,8 +1292,10 @@ static struct scsi_host_template qpti_template = {
 	.use_clustering		= ENABLE_CLUSTERING,
 };
 
+static const struct of_device_id qpti_match[];
 static int __devinit qpti_sbus_probe(struct platform_device *op)
 {
+	const struct of_device_id *match;
 	struct scsi_host_template *tpnt;
 	struct device_node *dp = op->dev.of_node;
 	struct Scsi_Host *host;
@@ -1301,9 +1303,10 @@ static int __devinit qpti_sbus_probe(struct platform_device *op)
 	static int nqptis;
 	const char *fcode;
 
-	if (!op->dev.of_match)
+	match = of_match_device(qpti_match, &op->dev);
+	if (!match)
 		return -EINVAL;
-	tpnt = op->dev.of_match->data;
+	tpnt = match->data;
 
 	/* Sometimes Antares cards come up not completely
 	 * setup, and we get a report of a zero IRQ.
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index fa5758cbded..6888b2ca5bf 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2454,7 +2454,7 @@ static void scsi_debug_slave_destroy(struct scsi_device *sdp)
 		printk(KERN_INFO "scsi_debug: slave_destroy <%u %u %u %u>\n",
 		       sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
 	if (devip) {
-		/* make this slot avaliable for re-use */
+		/* make this slot available for re-use */
 		devip->used = 0;
 		sdp->hostdata = NULL;
 	}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 633c2395a92..abea2cf05c2 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -321,6 +321,12 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 				    "changed. The Linux SCSI layer does not "
 				    "automatically adjust these parameters.\n");
 
+		if (sshdr.asc == 0x38 && sshdr.ascq == 0x07)
+			scmd_printk(KERN_WARNING, scmd,
+				    "Warning! Received an indication that the "
+				    "LUN reached a thin provisioning soft "
+				    "threshold.\n");
+
 		/*
 		 * Pass the UA upwards for a determination in the completion
 		 * functions.
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 6d5c7ff43f5..ec1803a4872 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -74,8 +74,6 @@ struct kmem_cache *scsi_sdb_cache;
  */
 #define SCSI_QUEUE_DELAY	3
 
-static void scsi_run_queue(struct request_queue *q);
-
 /*
  * Function:	scsi_unprep_request()
  *
@@ -161,7 +159,7 @@ static int __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
 	blk_requeue_request(q, cmd->request);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
-	scsi_run_queue(q);
+	kblockd_schedule_work(q, &device->requeue_work);
 
 	return 0;
 }
@@ -400,10 +398,15 @@ static inline int scsi_host_is_busy(struct Scsi_Host *shost)
 static void scsi_run_queue(struct request_queue *q)
 {
 	struct scsi_device *sdev = q->queuedata;
-	struct Scsi_Host *shost = sdev->host;
+	struct Scsi_Host *shost;
 	LIST_HEAD(starved_list);
 	unsigned long flags;
 
+	/* if the device is dead, sdev will be NULL, so no queue to run */
+	if (!sdev)
+		return;
+
+	shost = sdev->host;
 	if (scsi_target(sdev)->single_lun)
 		scsi_single_lun_run(sdev);
 
@@ -411,8 +414,6 @@ static void scsi_run_queue(struct request_queue *q)
 	list_splice_init(&shost->starved_list, &starved_list);
 
 	while (!list_empty(&starved_list)) {
-		int flagset;
-
 		/*
 		 * As long as shost is accepting commands and we have
 		 * starved queues, call blk_run_queue. scsi_request_fn
@@ -436,18 +437,9 @@ static void scsi_run_queue(struct request_queue *q)
 		}
 
 		spin_unlock(shost->host_lock);
-
 		spin_lock(sdev->request_queue->queue_lock);
-		flagset = test_bit(QUEUE_FLAG_REENTER, &q->queue_flags) &&
-				!test_bit(QUEUE_FLAG_REENTER,
-					&sdev->request_queue->queue_flags);
-		if (flagset)
-			queue_flag_set(QUEUE_FLAG_REENTER, sdev->request_queue);
-		__blk_run_queue(sdev->request_queue, false);
-		if (flagset)
-			queue_flag_clear(QUEUE_FLAG_REENTER, sdev->request_queue);
+		__blk_run_queue(sdev->request_queue);
 		spin_unlock(sdev->request_queue->queue_lock);
-
 		spin_lock(shost->host_lock);
 	}
 	/* put any unprocessed entries back */
@@ -457,6 +449,16 @@ static void scsi_run_queue(struct request_queue *q)
 	blk_run_queue(q);
 }
 
+void scsi_requeue_run_queue(struct work_struct *work)
+{
+	struct scsi_device *sdev;
+	struct request_queue *q;
+
+	sdev = container_of(work, struct scsi_device, requeue_work);
+	q = sdev->request_queue;
+	scsi_run_queue(q);
+}
+
 /*
  * Function:	scsi_requeue_command()
  *
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index a2ed201885a..26a8a45584e 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -499,7 +499,7 @@ scsi_netlink_init(void)
 				SCSI_NL_GRP_CNT, scsi_nl_rcv_msg, NULL,
 				THIS_MODULE);
 	if (!scsi_nl_sock) {
-		printk(KERN_ERR "%s: register of recieve handler failed\n",
+		printk(KERN_ERR "%s: register of receive handler failed\n",
 				__func__);
 		netlink_unregister_notifier(&scsi_netlink_notifier);
 		return;
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index c99da926fda..f46855cd853 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -386,13 +386,59 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf,
  * @s: output goes here
  * @p: not used
  */
-static int proc_scsi_show(struct seq_file *s, void *p)
+static int always_match(struct device *dev, void *data)
 {
-	seq_printf(s, "Attached devices:\n");
-	bus_for_each_dev(&scsi_bus_type, NULL, s, proc_print_scsidevice);
-	return 0;
+	return 1;
+}
+
+static inline struct device *next_scsi_device(struct device *start)
+{
+	struct device *next = bus_find_device(&scsi_bus_type, start, NULL,
+					      always_match);
+	put_device(start);
+	return next;
 }
 
+static void *scsi_seq_start(struct seq_file *sfile, loff_t *pos)
+{
+	struct device *dev = NULL;
+	loff_t n = *pos;
+
+	while ((dev = next_scsi_device(dev))) {
+		if (!n--)
+			break;
+		sfile->private++;
+	}
+	return dev;
+}
+
+static void *scsi_seq_next(struct seq_file *sfile, void *v, loff_t *pos)
+{
+	(*pos)++;
+	sfile->private++;
+	return next_scsi_device(v);
+}
+
+static void scsi_seq_stop(struct seq_file *sfile, void *v)
+{
+	put_device(v);
+}
+
+static int scsi_seq_show(struct seq_file *sfile, void *dev)
+{
+	if (!sfile->private)
+		seq_puts(sfile, "Attached devices:\n");
+
+	return proc_print_scsidevice(dev, sfile);
+}
+
+static const struct seq_operations scsi_seq_ops = {
+	.start	= scsi_seq_start,
+	.next	= scsi_seq_next,
+	.stop	= scsi_seq_stop,
+	.show	= scsi_seq_show
+};
+
 /**
  * proc_scsi_open - glue function
  * @inode: not used
@@ -406,7 +452,7 @@ static int proc_scsi_open(struct inode *inode, struct file *file)
 	 * We don't really need this for the write case but it doesn't
 	 * harm either.
 	 */
-	return single_open(file, proc_scsi_show, NULL);
+	return seq_open(file, &scsi_seq_ops);
 }
 
 static const struct file_operations proc_scsi_operations = {
@@ -415,7 +461,7 @@ static const struct file_operations proc_scsi_operations = {
 	.read		= seq_read,
 	.write		= proc_scsi_write,
 	.llseek		= seq_lseek,
-	.release	= single_release,
+	.release	= seq_release,
 };
 
 /**
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 087821fac8f..58584dc0724 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -242,6 +242,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	int display_failure_msg = 1, ret;
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 	extern void scsi_evt_thread(struct work_struct *work);
+	extern void scsi_requeue_run_queue(struct work_struct *work);
 
 	sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
 		       GFP_ATOMIC);
@@ -264,6 +265,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	INIT_LIST_HEAD(&sdev->event_list);
 	spin_lock_init(&sdev->list_lock);
 	INIT_WORK(&sdev->event_work, scsi_evt_thread);
+	INIT_WORK(&sdev->requeue_work, scsi_requeue_run_queue);
 
 	sdev->sdev_gendev.parent = get_device(&starget->dev);
 	sdev->sdev_target = starget;
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index e44ff64233f..e63912510fb 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -322,14 +322,8 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
 		kfree(evt);
 	}
 
-	if (sdev->request_queue) {
-		sdev->request_queue->queuedata = NULL;
-		/* user context needed to free queue */
-		scsi_free_queue(sdev->request_queue);
-		/* temporary expedient, try to catch use of queue lock
-		 * after free of sdev */
-		sdev->request_queue = NULL;
-	}
+	/* NULL queue means the device can't be used */
+	sdev->request_queue = NULL;
 
 	scsi_target_reap(scsi_target(sdev));
 
@@ -937,6 +931,12 @@ void __scsi_remove_device(struct scsi_device *sdev)
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
 	transport_destroy_device(dev);
+
+	/* cause the request function to reject all I/O requests */
+	sdev->request_queue->queuedata = NULL;
+
+	/* Freeing the queue signals to block that we're done */
+	scsi_free_queue(sdev->request_queue);
 	put_device(dev);
 }
 
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index f67282058ba..84a1fdf6786 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -93,7 +93,7 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost,
 
 	/*
 	 * The blk helpers are used to the READ/WRITE requests
-	 * transfering data from a initiator point of view. Since
+	 * transferring data from a initiator point of view. Since
 	 * we are in target mode we want the opposite.
 	 */
 	rq = blk_get_request(shost->uspace_req_q, !write, gfp_mask);
@@ -275,10 +275,8 @@ void scsi_tgt_free_queue(struct Scsi_Host *shost)
 
 	for (i = 0; i < ARRAY_SIZE(qdata->cmd_hash); i++) {
 		list_for_each_entry_safe(tcmd, n, &qdata->cmd_hash[i],
-					 hash_list) {
-			list_del(&tcmd->hash_list);
-			list_add(&tcmd->hash_list, &cmds);
-		}
+					 hash_list)
+			list_move(&tcmd->hash_list, &cmds);
 	}
 
 	spin_unlock_irqrestore(&qdata->cmd_hash_lock, flags);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 2941d2d92c9..1b214910b71 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -422,8 +422,7 @@ static int fc_host_setup(struct transport_container *tc, struct device *dev,
 
 	snprintf(fc_host->work_q_name, sizeof(fc_host->work_q_name),
 		 "fc_wq_%d", shost->host_no);
-	fc_host->work_q = create_singlethread_workqueue(
-					fc_host->work_q_name);
+	fc_host->work_q = alloc_workqueue(fc_host->work_q_name, 0, 0);
 	if (!fc_host->work_q)
 		return -ENOMEM;
 
@@ -431,8 +430,8 @@ static int fc_host_setup(struct transport_container *tc, struct device *dev,
 	snprintf(fc_host->devloss_work_q_name,
 		 sizeof(fc_host->devloss_work_q_name),
 		 "fc_dl_%d", shost->host_no);
-	fc_host->devloss_work_q = create_singlethread_workqueue(
-					fc_host->devloss_work_q_name);
+	fc_host->devloss_work_q =
+			alloc_workqueue(fc_host->devloss_work_q_name, 0, 0);
 	if (!fc_host->devloss_work_q) {
 		destroy_workqueue(fc_host->work_q);
 		fc_host->work_q = NULL;
@@ -2378,7 +2377,7 @@ fc_flush_devloss(struct Scsi_Host *shost)
  * fc_remove_host - called to terminate any fc_transport-related elements for a scsi host.
  * @shost:	Which &Scsi_Host
  *
- * This routine is expected to be called immediately preceeding the
+ * This routine is expected to be called immediately preceding the
  * a driver's call to scsi_remove_host().
  *
  * WARNING: A driver utilizing the fc_transport, which fails to call
@@ -2458,7 +2457,7 @@ static void fc_terminate_rport_io(struct fc_rport *rport)
 }
 
 /**
- * fc_starget_delete - called to delete the scsi decendents of an rport
+ * fc_starget_delete - called to delete the scsi descendants of an rport
  * @work:	remote port to be operated on.
  *
  * Deletes target and all sdevs.
@@ -2489,6 +2488,8 @@ fc_rport_final_delete(struct work_struct *work)
 	unsigned long flags;
 	int do_callback = 0;
 
+	fc_terminate_rport_io(rport);
+
 	/*
 	 * if a scan is pending, flush the SCSI Host work_q so that
 	 * that we can reclaim the rport scan work element.
@@ -2496,8 +2497,6 @@ fc_rport_final_delete(struct work_struct *work)
 	if (rport->flags & FC_RPORT_SCAN_PENDING)
 		scsi_flush_work(shost);
 
-	fc_terminate_rport_io(rport);
-
 	/*
 	 * Cancel any outstanding timers. These should really exist
 	 * only when rmmod'ing the LLDD and we're asking for
@@ -3816,28 +3815,17 @@ fail_host_msg:
 static void
 fc_bsg_goose_queue(struct fc_rport *rport)
 {
-	int flagset;
-	unsigned long flags;
-
 	if (!rport->rqst_q)
 		return;
 
+	/*
+	 * This get/put dance makes no sense
+	 */
 	get_device(&rport->dev);
-
-	spin_lock_irqsave(rport->rqst_q->queue_lock, flags);
-	flagset = test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags) &&
-		  !test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags);
-	if (flagset)
-		queue_flag_set(QUEUE_FLAG_REENTER, rport->rqst_q);
-	__blk_run_queue(rport->rqst_q, false);
-	if (flagset)
-		queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q);
-	spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags);
-
+	blk_run_queue_async(rport->rqst_q);
 	put_device(&rport->dev);
 }
 
-
 /**
  * fc_bsg_rport_dispatch - process rport bsg requests and dispatch to LLDD
  * @q:		rport request queue
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b61ebec6bca..bd0806e64e8 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1055,7 +1055,7 @@ static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
  *	@arg: this is third argument given to ioctl(2) system call.
  *	Often contains a pointer.
  *
- *	Returns 0 if successful (some ioctls return postive numbers on
+ *	Returns 0 if successful (some ioctls return positive numbers on
  *	success as well). Returns a negated errno value in case of error.
  *
  *	Note: most ioctls are forward onto the block subsystem or further
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index aefadc6a160..95019c747cc 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -567,7 +567,7 @@ static const struct block_device_operations sr_bdops =
 	.revalidate_disk = sr_block_revalidate_disk,
 	/* 
 	 * No compat_ioctl for now because sr_block_ioctl never
-	 * seems to pass arbitary ioctls down to host drivers.
+	 * seems to pass arbitrary ioctls down to host drivers.
 	 */
 };
 
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 4f0e5485ffd..07eaef1c722 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -467,7 +467,7 @@ static void free_all_tags( void )
  *
  * Parameters: struct scsi_cmnd *cmd
  *    The command to work on. The first scatter buffer's data are
- *    assumed to be already transfered into ptr/this_residual.
+ *    assumed to be already transferred into ptr/this_residual.
  */
 
 static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
@@ -1717,7 +1717,7 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd,
  *	bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes are transfered or exit
+ *	maximum number of bytes, 0 if all bytes are transferred or exit
  *	is in same phase.
  *
  * 	Also, *phase, *count, *data are modified in place.
@@ -1904,7 +1904,7 @@ static int do_abort (struct Scsi_Host *host)
  *	bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *	maximum number of bytes, 0 if all bytes or transfered or exit
+ *	maximum number of bytes, 0 if all bytes or transferred or exit
  *	is in same phase.
  *
  * 	Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
index 190107ae120..012c86edd59 100644
--- a/drivers/scsi/sym53c416.c
+++ b/drivers/scsi/sym53c416.c
@@ -774,7 +774,7 @@ static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
 
 	/* printk("sym53c416_reset\n"); */
 	base = SCpnt->device->host->io_port;
-	/* search scsi_id - fixme, we shouldnt need to iterate for this! */
+	/* search scsi_id - fixme, we shouldn't need to iterate for this! */
 	for(i = 0; i < host_index && scsi_id == -1; i++)
 		if(hosts[i].base == base)
 			scsi_id = hosts[i].scsi_id;
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h
index 7b08d6caaa9..63952ee300b 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw1.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h
@@ -1449,7 +1449,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = {
 		PADDR_B (msg_weird_seen),
 	/*
 	 *  We donnot handle extended messages from SCRIPTS.
-	 *  Read the amount of data correponding to the 
+	 *  Read the amount of data corresponding to the 
 	 *  message length and call the C code.
 	 */
 	SCR_COPY (1),
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h
index ae1fb179b88..c87d72443a1 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw2.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h
@@ -1326,7 +1326,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = {
 		PADDR_B (msg_weird_seen),
 	/*
 	 *  We donnot handle extended messages from SCRIPTS.
-	 *  Read the amount of data correponding to the 
+	 *  Read the amount of data corresponding to the 
 	 *  message length and call the C code.
 	 */
 	SCR_STORE_REL (scratcha, 1),
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 2c3e89ddf06..d92fe4037e9 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -2457,7 +2457,7 @@ static void sym_int_ma (struct sym_hcb *np)
 		}
 
 		/*
-		 *  The data in the dma fifo has not been transfered to
+		 *  The data in the dma fifo has not been transferred to
 		 *  the target -> add the amount to the rest
 		 *  and clear the data.
 		 *  Check the sstat2 register in case of wide transfer.
@@ -5094,7 +5094,7 @@ fail:
 }
 
 /*
- *  Lun control block deallocation. Returns the number of valid remaing LCBs
+ *  Lun control block deallocation. Returns the number of valid remaining LCBs
  *  for the target.
  */
 int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
diff --git a/drivers/scsi/sym53c8xx_2/sym_malloc.c b/drivers/scsi/sym53c8xx_2/sym_malloc.c
index 883cac10daf..6f9af0de7ec 100644
--- a/drivers/scsi/sym53c8xx_2/sym_malloc.c
+++ b/drivers/scsi/sym53c8xx_2/sym_malloc.c
@@ -50,7 +50,7 @@
  *  from the SCRIPTS code. In addition, cache line alignment 
  *  is guaranteed for power of 2 cache line size.
  *
- *  This allocator has been developped for the Linux sym53c8xx  
+ *  This allocator has been developed for the Linux sym53c8xx  
  *  driver, since this O/S does not provide naturally aligned 
  *  allocations.
  *  It has the advantage of allowing the driver to use private 
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index a124a28f2cc..a1baccce05f 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -565,12 +565,12 @@ dc390_StartSCSI( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_sr
 	pDCB->TagMask |= 1 << tag[1];
 	pSRB->TagNumber = tag[1];
 	DC390_write8(ScsiFifo, tag[1]);
-	DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for Cmd %li (SRB %p), block tag %02x\n", scmd->serial_number, pSRB, tag[1]));
+	DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for SRB %p, block tag %02x\n", pSRB, tag[1]));
 	cmd = SEL_W_ATN3;
     } else {
 	/* No TagQ */
 //no_tag:
-	DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for Cmd %li (SRB %p), No TagQ\n", disc_allowed ? "" : "o", scmd->serial_number, pSRB));
+	DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for SRB %p, No TagQ\n", disc_allowed ? "" : "o", pSRB));
     }
 
     pSRB->SRBState = SRB_START_;
@@ -620,8 +620,8 @@ dc390_StartSCSI( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_sr
     if (DC390_read8 (Scsi_Status) & INTERRUPT)
     {
 	dc390_freetag (pDCB, pSRB);
-	DEBUG0(printk ("DC390: Interrupt during Start SCSI (pid %li, target %02i-%02i)\n",
-		scmd->serial_number, scmd->device->id, scmd->device->lun));
+	DEBUG0(printk ("DC390: Interrupt during Start SCSI (target %02i-%02i)\n",
+		scmd->device->id, scmd->device->lun));
 	pSRB->SRBState = SRB_READY;
 	//DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
 	pACB->SelLost++;
@@ -1705,8 +1705,7 @@ dc390_SRBdone( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb*
 
     status = pSRB->TargetStatus;
 
-    DEBUG0(printk (" SRBdone (%02x,%08x), SRB %p, pid %li\n", status, pcmd->result,\
-		pSRB, pcmd->serial_number));
+    DEBUG0(printk (" SRBdone (%02x,%08x), SRB %p\n", status, pcmd->result, pSRB));
     if(pSRB->SRBFlag & AUTO_REQSENSE)
     {	/* Last command was a Request Sense */
 	pSRB->SRBFlag &= ~AUTO_REQSENSE;
@@ -1727,7 +1726,7 @@ dc390_SRBdone( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb*
 	    } else {
 		SET_RES_DRV(pcmd->result, DRIVER_SENSE);
 		//pSRB->ScsiCmdLen	 = (u8) (pSRB->Segment1[0] >> 8);
-		DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+		DEBUG0 (printk ("DC390: RETRY (%02x), target %02i-%02i\n", pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
 		pSRB->TotalXferredLen = 0;
 		SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
 	    }
@@ -1747,7 +1746,7 @@ dc390_SRBdone( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb*
 	else if (status == SAM_STAT_TASK_SET_FULL)
 	{
 	    scsi_track_queue_full(pcmd->device, pDCB->GoingSRBCnt - 1);
-	    DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+	    DEBUG0 (printk ("DC390: RETRY (%02x), target %02i-%02i\n", pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
 	    pSRB->TotalXferredLen = 0;
 	    SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
 	}
@@ -1801,7 +1800,7 @@ cmd_done:
     /* Add to free list */
     dc390_Free_insert (pACB, pSRB);
 
-    DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->serial_number));
+    DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done\n"));
     pcmd->scsi_done (pcmd);
 
     return;
@@ -1997,8 +1996,7 @@ static int DC390_abort(struct scsi_cmnd *cmd)
 	struct dc390_acb *pACB = (struct dc390_acb*) cmd->device->host->hostdata;
 	struct dc390_dcb *pDCB = (struct dc390_dcb*) cmd->device->hostdata;
 
-	scmd_printk(KERN_WARNING, cmd,
-		"DC390: Abort command (pid %li)\n", cmd->serial_number);
+	scmd_printk(KERN_WARNING, cmd, "DC390: Abort command\n");
 
 	/* abort() is too stupid for already sent commands at the moment. 
 	 * If it's called we are in trouble anyway, so let's dump some info 
@@ -2006,7 +2004,7 @@ static int DC390_abort(struct scsi_cmnd *cmd)
 	dc390_dumpinfo(pACB, pDCB, NULL);
 
 	pDCB->DCBFlag |= ABORT_DEV_;
-	printk(KERN_INFO "DC390: Aborted pid %li\n", cmd->serial_number);
+	printk(KERN_INFO "DC390: Aborted.\n");
 
 	return FAILED;
 }
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index edfc5da8be4..90e104d6b55 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -1256,8 +1256,8 @@ static int u14_34f_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct
    j = ((struct hostdata *) SCpnt->device->host->hostdata)->board_number;
 
    if (SCpnt->host_scribble)
-      panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
-            BN(j), SCpnt->serial_number, SCpnt);
+      panic("%s: qcomm, SCpnt %p already active.\n",
+            BN(j), SCpnt);
 
    /* i is the mailbox number, look for the first free mailbox
       starting from last_cp_used */
@@ -1286,9 +1286,9 @@ static int u14_34f_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct
    cpp->cpp_index = i;
    SCpnt->host_scribble = (unsigned char *) &cpp->cpp_index;
 
-   if (do_trace) printk("%s: qcomm, mbox %d, target %d.%d:%d, pid %ld.\n",
+   if (do_trace) printk("%s: qcomm, mbox %d, target %d.%d:%d.\n",
                         BN(j), i, SCpnt->device->channel, SCpnt->device->id,
-                        SCpnt->device->lun, SCpnt->serial_number);
+                        SCpnt->device->lun);
 
    cpp->opcode = OP_SCSI;
    cpp->channel = SCpnt->device->channel;
@@ -1315,7 +1315,7 @@ static int u14_34f_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct
       unmap_dma(i, j);
       SCpnt->host_scribble = NULL;
       scmd_printk(KERN_INFO, SCpnt,
-      		"qcomm, pid %ld, adapter busy.\n", SCpnt->serial_number);
+      		"qcomm, adapter busy.\n");
       return 1;
       }
 
@@ -1337,14 +1337,12 @@ static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
    j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
 
    if (SCarg->host_scribble == NULL) {
-      scmd_printk(KERN_INFO, SCarg, "abort, pid %ld inactive.\n",
-             SCarg->serial_number);
+      scmd_printk(KERN_INFO, SCarg, "abort, command inactive.\n");
       return SUCCESS;
       }
 
    i = *(unsigned int *)SCarg->host_scribble;
-   scmd_printk(KERN_INFO, SCarg, "abort, mbox %d, pid %ld.\n",
-	       i, SCarg->serial_number);
+   scmd_printk(KERN_INFO, SCarg, "abort, mbox %d.\n", i);
 
    if (i >= sh[j]->can_queue)
       panic("%s: abort, invalid SCarg->host_scribble.\n", BN(j));
@@ -1387,8 +1385,7 @@ static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
       SCarg->result = DID_ABORT << 16;
       SCarg->host_scribble = NULL;
       HD(j)->cp_stat[i] = FREE;
-      printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
-             BN(j), i, SCarg->serial_number);
+      printk("%s, abort, mbox %d ready, DID_ABORT, done.\n", BN(j), i);
       SCarg->scsi_done(SCarg);
       return SUCCESS;
       }
@@ -1403,12 +1400,12 @@ static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
    struct scsi_cmnd *SCpnt;
 
    j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
-   scmd_printk(KERN_INFO, SCarg, "reset, enter, pid %ld.\n", SCarg->serial_number);
+   scmd_printk(KERN_INFO, SCarg, "reset, enter.\n");
 
    spin_lock_irq(sh[j]->host_lock);
 
    if (SCarg->host_scribble == NULL)
-      printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->serial_number);
+      printk("%s: reset, inactive.\n", BN(j));
 
    if (HD(j)->in_reset) {
       printk("%s: reset, exit, already in reset.\n", BN(j));
@@ -1445,14 +1442,12 @@ static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
 
       if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
          HD(j)->cp_stat[i] = ABORTING;
-         printk("%s: reset, mbox %d aborting, pid %ld.\n",
-                BN(j), i, SCpnt->serial_number);
+         printk("%s: reset, mbox %d aborting.\n", BN(j), i);
          }
 
       else {
          HD(j)->cp_stat[i] = IN_RESET;
-         printk("%s: reset, mbox %d in reset, pid %ld.\n",
-                BN(j), i, SCpnt->serial_number);
+         printk("%s: reset, mbox %d in reset.\n", BN(j), i);
          }
 
       if (SCpnt->host_scribble == NULL)
@@ -1500,8 +1495,7 @@ static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
          /* This mailbox is still waiting for its interrupt */
          HD(j)->cp_stat[i] = LOCKED;
 
-         printk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
-                BN(j), i, SCpnt->serial_number);
+         printk("%s, reset, mbox %d locked, DID_RESET, done.\n", BN(j), i);
          }
 
       else if (HD(j)->cp_stat[i] == ABORTING) {
@@ -1513,8 +1507,7 @@ static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
          /* This mailbox was never queued to the adapter */
          HD(j)->cp_stat[i] = FREE;
 
-         printk("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
-                BN(j), i, SCpnt->serial_number);
+         printk("%s, reset, mbox %d aborting, DID_RESET, done.\n", BN(j), i);
          }
 
       else
@@ -1528,7 +1521,7 @@ static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
    HD(j)->in_reset = FALSE;
    do_trace = FALSE;
 
-   if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->serial_number);
+   if (arg_done) printk("%s: reset, exit, done.\n", BN(j));
    else          printk("%s: reset, exit.\n", BN(j));
 
    spin_unlock_irq(sh[j]->host_lock);
@@ -1671,10 +1664,10 @@ static int reorder(unsigned int j, unsigned long cursec,
    if (link_statistics && (overlap || !(flushcount % link_statistics)))
       for (n = 0; n < n_ready; n++) {
          k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
-         printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %u"\
+         printk("%s %d.%d:%d mb %d fc %d nr %d sec %ld ns %u"\
                 " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
                 (ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
-                SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready,
+                SCpnt->lun, k, flushcount, n_ready,
                 blk_rq_pos(SCpnt->request), blk_rq_sectors(SCpnt->request),
 		cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
                 YESNO(overlap), cpp->xdir);
@@ -1709,9 +1702,9 @@ static void flush_dev(struct scsi_device *dev, unsigned long cursec, unsigned in
 
       if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
          scmd_printk(KERN_INFO, SCpnt,
-	 	"%s, pid %ld, mbox %d, adapter"
+	 	"%s, mbox %d, adapter"
                 " busy, will abort.\n", (ihdlr ? "ihdlr" : "qcomm"),
-                SCpnt->serial_number, k);
+                k);
          HD(j)->cp_stat[k] = ABORTING;
          continue;
          }
@@ -1793,12 +1786,12 @@ static irqreturn_t ihdlr(unsigned int j)
    if (SCpnt == NULL) panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", BN(j), i);
 
    if (SCpnt->host_scribble == NULL)
-      panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", BN(j), i,
-            SCpnt->serial_number, SCpnt);
+      panic("%s: ihdlr, mbox %d, SCpnt %p garbled.\n", BN(j), i,
+            SCpnt);
 
    if (*(unsigned int *)SCpnt->host_scribble != i)
-      panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
-            BN(j), i, SCpnt->serial_number, *(unsigned int *)SCpnt->host_scribble);
+      panic("%s: ihdlr, mbox %d, index mismatch %d.\n",
+            BN(j), i, *(unsigned int *)SCpnt->host_scribble);
 
    sync_dma(i, j);
 
@@ -1841,8 +1834,8 @@ static irqreturn_t ihdlr(unsigned int j)
              (!(tstatus == CHECK_CONDITION && HD(j)->iocount <= 1000 &&
                (SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
             scmd_printk(KERN_INFO, SCpnt,
-	    	"ihdlr, pid %ld, target_status 0x%x, sense key 0x%x.\n",
-                   SCpnt->serial_number, spp->target_status,
+	    	"ihdlr, target_status 0x%x, sense key 0x%x.\n",
+                   spp->target_status,
                    SCpnt->sense_buffer[2]);
 
          HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)] = 0;
@@ -1913,8 +1906,8 @@ static irqreturn_t ihdlr(unsigned int j)
         do_trace || msg_byte(spp->target_status))
 #endif
       scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"\
-             " pid %ld, reg 0x%x, count %d.\n",
-             i, spp->adapter_status, spp->target_status, SCpnt->serial_number,
+             " reg 0x%x, count %d.\n",
+             i, spp->adapter_status, spp->target_status,
              reg, HD(j)->iocount);
 
    unmap_dma(i, j);
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index 0571ef9639c..9f4b58b7daa 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -138,6 +138,7 @@
 #include <linux/spinlock.h>
 #include <linux/stat.h>
 #include <linux/bitops.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 5f697e0bd00..97ae716134d 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -381,7 +381,7 @@ wd33c93_queuecommand_lck(struct scsi_cmnd *cmd,
 	hostdata = (struct WD33C93_hostdata *) cmd->device->host->hostdata;
 
 	DB(DB_QUEUE_COMMAND,
-	   printk("Q-%d-%02x-%ld( ", cmd->device->id, cmd->cmnd[0], cmd->serial_number))
+	   printk("Q-%d-%02x( ", cmd->device->id, cmd->cmnd[0]))
 
 /* Set up a few fields in the scsi_cmnd structure for our own use:
  *  - host_scribble is the pointer to the next cmd in the input queue
@@ -462,7 +462,7 @@ wd33c93_queuecommand_lck(struct scsi_cmnd *cmd,
 
 	wd33c93_execute(cmd->device->host);
 
-	DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
+	DB(DB_QUEUE_COMMAND, printk(")Q "))
 
 	spin_unlock_irq(&hostdata->lock);
 	return 0;
@@ -687,7 +687,7 @@ wd33c93_execute(struct Scsi_Host *instance)
 	 */
 
 	DB(DB_EXECUTE,
-	   printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
+	   printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : ""))
 }
 
 static void
@@ -963,7 +963,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 	case CSR_XFER_DONE | PHS_COMMAND:
 	case CSR_UNEXP | PHS_COMMAND:
 	case CSR_SRV_REQ | PHS_COMMAND:
-		DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
+		DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0]))
 		    transfer_pio(regs, cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR,
 				 hostdata);
 		hostdata->state = S_CONNECTED;
@@ -1007,7 +1007,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 		switch (msg) {
 
 		case COMMAND_COMPLETE:
-			DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
+			DB(DB_INTR, printk("CCMP"))
 			    write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
 			hostdata->state = S_PRE_CMP_DISC;
 			break;
@@ -1174,7 +1174,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 
 		write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
 		if (phs == 0x60) {
-			DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
+			DB(DB_INTR, printk("SX-DONE"))
 			    cmd->SCp.Message = COMMAND_COMPLETE;
 			lun = read_wd33c93(regs, WD_TARGET_LUN);
 			DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
@@ -1200,8 +1200,8 @@ wd33c93_intr(struct Scsi_Host *instance)
 			wd33c93_execute(instance);
 		} else {
 			printk
-			    ("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---",
-			     asr, sr, phs, cmd->serial_number);
+			    ("%02x:%02x:%02x: Unknown SEL_XFER_DONE phase!!---",
+			     asr, sr, phs);
 			spin_unlock_irqrestore(&hostdata->lock, flags);
 		}
 		break;
@@ -1266,7 +1266,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 			spin_unlock_irqrestore(&hostdata->lock, flags);
 			return;
 		}
-		DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
+		DB(DB_INTR, printk("UNEXP_DISC"))
 		    hostdata->connected = NULL;
 		hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
 		hostdata->state = S_UNCONNECTED;
@@ -1292,7 +1292,7 @@ wd33c93_intr(struct Scsi_Host *instance)
  */
 
 		write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
-		DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
+		DB(DB_INTR, printk("DISC"))
 		    if (cmd == NULL) {
 			printk(" - Already disconnected! ");
 			hostdata->state = S_UNCONNECTED;
@@ -1491,7 +1491,6 @@ wd33c93_intr(struct Scsi_Host *instance)
 		} else
 			hostdata->state = S_CONNECTED;
 
-		DB(DB_INTR, printk("-%ld", cmd->serial_number))
 		    spin_unlock_irqrestore(&hostdata->lock, flags);
 		break;
 
@@ -1637,8 +1636,8 @@ wd33c93_abort(struct scsi_cmnd * cmd)
 			cmd->host_scribble = NULL;
 			cmd->result = DID_ABORT << 16;
 			printk
-			    ("scsi%d: Abort - removing command %ld from input_Q. ",
-			     instance->host_no, cmd->serial_number);
+			    ("scsi%d: Abort - removing command from input_Q. ",
+			     instance->host_no);
 			enable_irq(cmd->device->host->irq);
 			cmd->scsi_done(cmd);
 			return SUCCESS;
@@ -1662,8 +1661,8 @@ wd33c93_abort(struct scsi_cmnd * cmd)
 		uchar sr, asr;
 		unsigned long timeout;
 
-		printk("scsi%d: Aborting connected command %ld - ",
-		       instance->host_no, cmd->serial_number);
+		printk("scsi%d: Aborting connected command - ",
+		       instance->host_no);
 
 		printk("stopping DMA - ");
 		if (hostdata->dma == D_DMA_RUNNING) {
@@ -1729,8 +1728,8 @@ wd33c93_abort(struct scsi_cmnd * cmd)
 	while (tmp) {
 		if (tmp == cmd) {
 			printk
-			    ("scsi%d: Abort - command %ld found on disconnected_Q - ",
-			     instance->host_no, cmd->serial_number);
+			    ("scsi%d: Abort - command found on disconnected_Q - ",
+			     instance->host_no);
 			printk("Abort SNOOZE. ");
 			enable_irq(cmd->device->host->irq);
 			return FAILED;
@@ -1843,7 +1842,7 @@ check_setup_args(char *key, int *flags, int *val, char *buf)
  *
  * The original driver used to rely on a fixed sx_table, containing periods
  * for (only) the lower limits of the respective input-clock-frequency ranges
- * (8-10/12-15/16-20 MHz). Although it seems, that no problems ocurred with
+ * (8-10/12-15/16-20 MHz). Although it seems, that no problems occurred with
  * this setting so far, it might be desirable to adjust the transfer periods
  * closer to the really attached, possibly 25% higher, input-clock, since
  * - the wd33c93 may really use a significant shorter period, than it has
@@ -2180,8 +2179,8 @@ wd33c93_proc_info(struct Scsi_Host *instance, char *buf, char **start, off_t off
 		strcat(bp, "\nconnected:     ");
 		if (hd->connected) {
 			cmd = (struct scsi_cmnd *) hd->connected;
-			sprintf(tbuf, " %ld-%d:%d(%02x)",
-				cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+			sprintf(tbuf, " %d:%d(%02x)",
+				cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 			strcat(bp, tbuf);
 		}
 	}
@@ -2189,8 +2188,8 @@ wd33c93_proc_info(struct Scsi_Host *instance, char *buf, char **start, off_t off
 		strcat(bp, "\ninput_Q:       ");
 		cmd = (struct scsi_cmnd *) hd->input_Q;
 		while (cmd) {
-			sprintf(tbuf, " %ld-%d:%d(%02x)",
-				cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+			sprintf(tbuf, " %d:%d(%02x)",
+				cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 			strcat(bp, tbuf);
 			cmd = (struct scsi_cmnd *) cmd->host_scribble;
 		}
@@ -2199,8 +2198,8 @@ wd33c93_proc_info(struct Scsi_Host *instance, char *buf, char **start, off_t off
 		strcat(bp, "\ndisconnected_Q:");
 		cmd = (struct scsi_cmnd *) hd->disconnected_Q;
 		while (cmd) {
-			sprintf(tbuf, " %ld-%d:%d(%02x)",
-				cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+			sprintf(tbuf, " %d:%d(%02x)",
+				cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 			strcat(bp, tbuf);
 			cmd = (struct scsi_cmnd *) cmd->host_scribble;
 		}
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index db451ae0a36..9ee0afef2d1 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -837,7 +837,7 @@ static inline Scb *alloc_scbs(struct Scsi_Host *host, int needed)
 		}
 	}
 
-	/* Take the lock, then check we didnt get beaten, if so try again */
+	/* Take the lock, then check we didn't get beaten, if so try again */
 	spin_lock_irqsave(&scbpool_lock, flags);
 	if (freescbs < needed) {
 		spin_unlock_irqrestore(&scbpool_lock, flags);
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
index 04113e5304a..1e824fb1649 100644
--- a/drivers/sfi/sfi_core.c
+++ b/drivers/sfi/sfi_core.c
@@ -515,7 +515,7 @@ void __init sfi_init_late(void)
 }
 
 /*
- * The reason we put it here becasue we need wait till the /sys/firmware
+ * The reason we put it here because we need wait till the /sys/firmware
  * is setup, then our interface can be registered in /sys/firmware/sfi
  */
 core_initcall(sfi_sysfs_init);
diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h
index df36a421e67..5b934851efa 100644
--- a/drivers/sh/intc/internals.h
+++ b/drivers/sh/intc/internals.h
@@ -86,7 +86,7 @@ enum {	MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */
 
 static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
 {
-	struct irq_chip *chip = get_irq_chip(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
 
 	return container_of(chip, struct intc_desc_int, chip);
 }
@@ -103,7 +103,7 @@ static inline void activate_irq(int irq)
 	set_irq_flags(irq, IRQF_VALID);
 #else
 	/* same effect on other architectures */
-	set_irq_noprobe(irq);
+	irq_set_noprobe(irq);
 #endif
 }
 
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 5a4e0afb9ad..08de58e7f59 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -661,7 +661,7 @@ static void readwriter(struct pl022 *pl022)
 {
 
 	/*
-	 * The FIFO depth is different inbetween primecell variants.
+	 * The FIFO depth is different between primecell variants.
 	 * I believe filling in too much in the FIFO might cause
 	 * errons in 8bit wide transfers on ARM variants (just 8 words
 	 * FIFO, means only 8x8 = 64 bits in FIFO) at least.
@@ -722,7 +722,7 @@ static void readwriter(struct pl022 *pl022)
 		 * This inner reader takes care of things appearing in the RX
 		 * FIFO as we're transmitting. This will happen a lot since the
 		 * clock starts running when you put things into the TX FIFO,
-		 * and then things are continously clocked into the RX FIFO.
+		 * and then things are continuously clocked into the RX FIFO.
 		 */
 		while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
 		       && (pl022->rx < pl022->rx_end)) {
@@ -842,7 +842,7 @@ static void dma_callback(void *data)
 
 	unmap_free_dma_scatter(pl022);
 
-	/* Update total bytes transfered */
+	/* Update total bytes transferred */
 	msg->actual_length += pl022->cur_transfer->len;
 	if (pl022->cur_transfer->cs_change)
 		pl022->cur_chip->
@@ -1224,7 +1224,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
 				 "number of bytes on a 16bit bus?)\n",
 				 (u32) (pl022->rx - pl022->rx_end));
 		}
-		/* Update total bytes transfered */
+		/* Update total bytes transferred */
 		msg->actual_length += pl022->cur_transfer->len;
 		if (pl022->cur_transfer->cs_change)
 			pl022->cur_chip->
@@ -1415,11 +1415,11 @@ static void do_polling_transfer(struct pl022 *pl022)
 		       SSP_CR1(pl022->virtbase));
 
 		dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n");
-		/* FIXME: insert a timeout so we don't hang here indefinately */
+		/* FIXME: insert a timeout so we don't hang here indefinitely */
 		while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
 			readwriter(pl022);
 
-		/* Update total byte transfered */
+		/* Update total byte transferred */
 		message->actual_length += pl022->cur_transfer->len;
 		if (pl022->cur_transfer->cs_change)
 			pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
@@ -1555,7 +1555,7 @@ static int stop_queue(struct pl022 *pl022)
 	 * A wait_queue on the pl022->busy could be used, but then the common
 	 * execution path (pump_messages) would be required to call wake_up or
 	 * friends on every SPI message. Do this instead */
-	while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
+	while ((!list_empty(&pl022->queue) || pl022->busy) && limit--) {
 		spin_unlock_irqrestore(&pl022->queue_lock, flags);
 		msleep(10);
 		spin_lock_irqsave(&pl022->queue_lock, flags);
@@ -2129,7 +2129,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
 			"probe - problem registering spi master\n");
 		goto err_spi_register;
 	}
-	dev_dbg(dev, "probe succeded\n");
+	dev_dbg(dev, "probe succeeded\n");
 	/*
 	 * Disable the silicon block pclk and any voltage domain and just
 	 * power it up and clock it when it's needed
@@ -2184,7 +2184,7 @@ pl022_remove(struct amba_device *adev)
 	spi_unregister_master(pl022->master);
 	spi_master_put(pl022->master);
 	amba_set_drvdata(adev, NULL);
-	dev_dbg(&adev->dev, "remove succeded\n");
+	dev_dbg(&adev->dev, "remove succeeded\n");
 	return 0;
 }
 
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 3c9ade69643..b50563d320e 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -480,7 +480,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
 		au1xxx_dbdma_stop(hw->dma_rx_ch);
 		au1xxx_dbdma_stop(hw->dma_tx_ch);
 
-		/* get number of transfered bytes */
+		/* get number of transferred bytes */
 		hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch);
 		hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch);
 
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 9a6196461b2..871e337c917 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -345,7 +345,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
 
 void dw_spi_xfer_done(struct dw_spi *dws)
 {
-	/* Update total byte transfered return count actual bytes read */
+	/* Update total byte transferred return count actual bytes read */
 	dws->cur_msg->actual_length += dws->len;
 
 	/* Move to next transfer */
@@ -821,7 +821,7 @@ static int stop_queue(struct dw_spi *dws)
 
 	spin_lock_irqsave(&dws->lock, flags);
 	dws->run = QUEUE_STOPPED;
-	while (!list_empty(&dws->queue) && dws->busy && limit--) {
+	while ((!list_empty(&dws->queue) || dws->busy) && limit--) {
 		spin_unlock_irqrestore(&dws->lock, flags);
 		msleep(10);
 		spin_lock_irqsave(&dws->lock, flags);
diff --git a/drivers/spi/dw_spi.h b/drivers/spi/dw_spi.h
index fb0bce56484..b23e452adaf 100644
--- a/drivers/spi/dw_spi.h
+++ b/drivers/spi/dw_spi.h
@@ -46,7 +46,7 @@
 #define SPI_INT_RXFI			(1 << 4)
 #define SPI_INT_MSTI			(1 << 5)
 
-/* TX RX interrupt level threshhold, max can be 256 */
+/* TX RX interrupt level threshold, max can be 256 */
 #define SPI_INT_THRESHOLD		32
 
 enum dw_ssi_type {
diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c
index 0ba35df9a6d..d3570071e98 100644
--- a/drivers/spi/ep93xx_spi.c
+++ b/drivers/spi/ep93xx_spi.c
@@ -512,7 +512,7 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
  *
  * This function processes one SPI transfer given in @t. Function waits until
  * transfer is complete (may sleep) and updates @msg->status based on whether
- * transfer was succesfully processed or not.
+ * transfer was successfully processed or not.
  */
 static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
 					struct spi_message *msg,
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index a429b01d028..dc25bee8d33 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -700,7 +700,7 @@ static void int_transfer_complete(struct driver_data *drv_data)
 	if (!pxa25x_ssp_comp(drv_data))
 		write_SSTO(0, reg);
 
-	/* Update total byte transfered return count actual bytes read */
+	/* Update total byte transferred return count actual bytes read */
 	drv_data->cur_msg->actual_length += drv_data->len -
 				(drv_data->rx_end - drv_data->rx);
 
@@ -759,7 +759,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
 
 		/*
 		 * PXA25x_SSP has no timeout, set up rx threshould for the
-		 * remaing RX bytes.
+		 * remaining RX bytes.
 		 */
 		if (pxa25x_ssp_comp(drv_data)) {
 
@@ -1493,7 +1493,7 @@ static int stop_queue(struct driver_data *drv_data)
 	 * execution path (pump_messages) would be required to call wake_up or
 	 * friends on every SPI message. Do this instead */
 	drv_data->run = QUEUE_STOPPED;
-	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+	while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
 		spin_unlock_irqrestore(&drv_data->lock, flags);
 		msleep(10);
 		spin_lock_irqsave(&drv_data->lock, flags);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 34bb17f0301..82b9a428c32 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -957,7 +957,7 @@ EXPORT_SYMBOL_GPL(spi_sync);
  * drivers may DMA directly into and out of the message buffers.
  *
  * This call should be used by drivers that require exclusive access to the
- * SPI bus. It has to be preceeded by a spi_bus_lock call. The SPI bus must
+ * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
  * be released by a spi_bus_unlock call when the exclusive access is over.
  *
  * It returns zero on success, else a negative error code.
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a28462486df..f706dba165c 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -905,7 +905,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 			"IO write error!\n");
 		message->state = ERROR_STATE;
 	} else {
-		/* Update total byte transfered */
+		/* Update total byte transferred */
 		message->actual_length += drv_data->len_in_bytes;
 		/* Move to next transfer of this msg */
 		message->state = bfin_spi_next_transfer(drv_data);
@@ -1284,7 +1284,7 @@ static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data)
 	 * friends on every SPI message. Do this instead
 	 */
 	drv_data->running = false;
-	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+	while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
 		spin_unlock_irqrestore(&drv_data->lock, flags);
 		msleep(10);
 		spin_lock_irqsave(&drv_data->lock, flags);
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
index 900e921ab80..496f895a002 100644
--- a/drivers/spi/spi_fsl_espi.c
+++ b/drivers/spi/spi_fsl_espi.c
@@ -474,7 +474,7 @@ static int fsl_espi_setup(struct spi_device *spi)
 	mpc8xxx_spi = spi_master_get_devdata(spi->master);
 	reg_base = mpc8xxx_spi->reg_base;
 
-	hw_mode = cs->hw_mode; /* Save orginal settings */
+	hw_mode = cs->hw_mode; /* Save original settings */
 	cs->hw_mode = mpc8xxx_spi_read_reg(
 			&reg_base->csmode[spi->chip_select]);
 	/* mask out bits we are going to set */
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index a467b20baac..7ad48585c5e 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 static int ssb_pci_sprom_get(struct ssb_bus *bus,
 			     struct ssb_sprom *sprom)
 {
-	const struct ssb_sprom *fallback;
 	int err;
 	u16 *buf;
 
@@ -670,7 +669,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
 		return -ENODEV;
 	}
-	if (bus->chipco.dev) {	/* can be unavailible! */
+	if (bus->chipco.dev) {	/* can be unavailable! */
 		/*
 		 * get SPROM offset: SSB_SPROM_BASE1 except for
 		 * chipcommon rev >= 31 or chip ID is 0x4312 and
@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 		if (err) {
 			/* All CRC attempts failed.
 			 * Maybe there is no SPROM on the device?
-			 * If we have a fallback, use that. */
-			fallback = ssb_get_fallback_sprom();
-			if (fallback) {
-				memcpy(sprom, fallback, sizeof(*sprom));
+			 * Now we ask the arch code if there is some sprom
+			 * available for this device in some other storage */
+			err = ssb_fill_sprom_with_fallback(bus, sprom);
+			if (err) {
+				ssb_printk(KERN_WARNING PFX "WARNING: Using"
+					   " fallback SPROM failed (err %d)\n",
+					   err);
+			} else {
+				ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+					    " revision %d provided by"
+					    " platform.\n", sprom->revision);
 				err = 0;
 				goto out_free;
 			}
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 4f7cc8d1327..45ff0e3a382 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -17,7 +17,7 @@
 #include <linux/slab.h>
 
 
-static const struct ssb_sprom *fallback_sprom;
+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
 
 
 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
@@ -145,36 +145,43 @@ out:
 }
 
 /**
- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+ * ssb_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
  *
- * @sprom: The SPROM data structure to register.
+ * @sprom_callback: The callback function.
  *
- * With this function the architecture implementation may register a fallback
- * SPROM data structure. The fallback is only used for PCI based SSB devices,
- * where no valid SPROM can be found in the shadow registers.
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * only used for PCI based SSB devices, where no valid SPROM can be found
+ * in the shadow registers.
  *
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
+ * This function is useful for weird architectures that have a half-assed
+ * SSB device hardwired to their PCI bus.
  *
- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
- * don't use this fallback.
- * Architectures must provide the SPROM for native SSB devices anyway,
- * so the fallback also isn't used for native devices.
+ * Note that it does only work with PCI attached SSB devices. PCMCIA
+ * devices currently don't use this fallback.
+ * Architectures must provide the SPROM for native SSB devices anyway, so
+ * the fallback also isn't used for native devices.
  *
- * This function is available for architecture code, only. So it is not exported.
+ * This function is available for architecture code, only. So it is not
+ * exported.
  */
-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
+				     struct ssb_sprom *out))
 {
-	if (fallback_sprom)
+	if (get_fallback_sprom)
 		return -EEXIST;
-	fallback_sprom = sprom;
+	get_fallback_sprom = sprom_callback;
 
 	return 0;
 }
 
-const struct ssb_sprom *ssb_get_fallback_sprom(void)
+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
 {
-	return fallback_sprom;
+	if (!get_fallback_sprom)
+		return -ENOENT;
+
+	return get_fallback_sprom(bus, out);
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
@@ -185,7 +192,7 @@ bool ssb_is_sprom_available(struct ssb_bus *bus)
 	/* this routine differs from specs as we do not access SPROM directly
 	   on PCMCIA */
 	if (bus->bustype == SSB_BUSTYPE_PCI &&
-	    bus->chipco.dev &&	/* can be unavailible! */
+	    bus->chipco.dev &&	/* can be unavailable! */
 	    bus->chipco.dev->id.revision >= 31)
 		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
 
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 0331139a726..77653014db0 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
 			     const char *buf, size_t count,
 			     int (*sprom_check_crc)(const u16 *sprom, size_t size),
 			     int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
+					struct ssb_sprom *out);
 
 
 /* core.c */
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 18b43fcb417..e3786f161bc 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -117,8 +117,6 @@ source "drivers/staging/hv/Kconfig"
 
 source "drivers/staging/vme/Kconfig"
 
-source "drivers/staging/memrar/Kconfig"
-
 source "drivers/staging/sep/Kconfig"
 
 source "drivers/staging/iio/Kconfig"
@@ -133,8 +131,6 @@ source "drivers/staging/wlags49_h2/Kconfig"
 
 source "drivers/staging/wlags49_h25/Kconfig"
 
-source "drivers/staging/samsung-laptop/Kconfig"
-
 source "drivers/staging/sm7xx/Kconfig"
 
 source "drivers/staging/dt3155v4l/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index cfd13cd55ef..f0d5c531561 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/
-obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar/
 obj-$(CONFIG_DX_SEP)            += sep/
 obj-$(CONFIG_IIO)		+= iio/
 obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio/
@@ -49,7 +48,6 @@ obj-$(CONFIG_XVMALLOC)		+= zram/
 obj-$(CONFIG_ZCACHE)		+= zcache/
 obj-$(CONFIG_WLAGS49_H2)	+= wlags49_h2/
 obj-$(CONFIG_WLAGS49_H25)	+= wlags49_h25/
-obj-$(CONFIG_SAMSUNG_LAPTOP)	+= samsung-laptop/
 obj-$(CONFIG_FB_SM7XX)		+= sm7xx/
 obj-$(CONFIG_VIDEO_DT3155)	+= dt3155v4l/
 obj-$(CONFIG_CRYSTALHD)		+= crystalhd/
diff --git a/drivers/staging/altera-stapl/altera-jtag.c b/drivers/staging/altera-stapl/altera-jtag.c
index 6b633b179a7..876308858b8 100644
--- a/drivers/staging/altera-stapl/altera-jtag.c
+++ b/drivers/staging/altera-stapl/altera-jtag.c
@@ -23,6 +23,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/slab.h>
 #include <staging/altera.h>
diff --git a/drivers/staging/ath6kl/htc2/AR6000/ar6k_gmbox_hciuart.c b/drivers/staging/ath6kl/htc2/AR6000/ar6k_gmbox_hciuart.c
index c6488e0d130..41223f95358 100644
--- a/drivers/staging/ath6kl/htc2/AR6000/ar6k_gmbox_hciuart.c
+++ b/drivers/staging/ath6kl/htc2/AR6000/ar6k_gmbox_hciuart.c
@@ -237,7 +237,7 @@ static int CreditsAvailableCallback(void *pContext, int Credits, bool CreditIRQE
                          pProt->CreditsCurrentSeek));
         
         if (pProt->CreditsAvailable >= pProt->CreditsCurrentSeek) {
-                /* we have enough credits to fullfill at least 1 packet waiting in the queue */
+                /* we have enough credits to fulfill at least 1 packet waiting in the queue */
             pProt->CreditsCurrentSeek = 0;
             pProt->SendStateFlags &= ~HCI_SEND_WAIT_CREDITS;  
             doPendingSends = true;
@@ -285,7 +285,7 @@ static void FailureCallback(void *pContext, int Status)
 {
     struct gmbox_proto_hci_uart  *pProt = (struct gmbox_proto_hci_uart *)pContext; 
     
-        /* target assertion occured */           
+        /* target assertion occurred */           
     NotifyTransportFailure(pProt, Status);  
 }
 
@@ -507,7 +507,7 @@ static int HCIUartMessagePending(void *pContext, u8 LookAheadBytes[], int ValidB
         
     } while (false);
         
-        /* check if we need to disable the reciever */
+        /* check if we need to disable the receiver */
     if (status || blockRecv) {
         DevGMboxIRQAction(pProt->pDev, GMBOX_RECV_IRQ_DISABLE, PROC_IO_SYNC); 
     }
diff --git a/drivers/staging/ath6kl/include/aggr_recv_api.h b/drivers/staging/ath6kl/include/aggr_recv_api.h
index 67a058492c4..5ead58d5feb 100644
--- a/drivers/staging/ath6kl/include/aggr_recv_api.h
+++ b/drivers/staging/ath6kl/include/aggr_recv_api.h
@@ -72,7 +72,7 @@ aggr_process_bar(void *cntxt, u8 tid, u16 seq_no);
  * This event is to initiate/modify the receive side window.
  * Target will send WMI_ADDBA_REQ_EVENTID event to host - to setup 
  * recv re-ordering queues. Target will negotiate ADDBA with peer, 
- * and indicate via this event after succesfully completing the 
+ * and indicate via this event after successfully completing the 
  * negotiation. This happens in two situations:
  *  1. Initial setup of aggregation
  *  2. Renegotiation of current recv window.
diff --git a/drivers/staging/ath6kl/include/common/a_hci.h b/drivers/staging/ath6kl/include/common/a_hci.h
index 08cb013090b..379d65224e3 100644
--- a/drivers/staging/ath6kl/include/common/a_hci.h
+++ b/drivers/staging/ath6kl/include/common/a_hci.h
@@ -124,7 +124,7 @@
 #define PAL_NUM_COMPL_DATA_BLOCK_EVENT              0x48
 #define PAL_SHORT_RANGE_MODE_CHANGE_COMPL_EVENT     0x4C
 #define PAL_AMP_STATUS_CHANGE_EVENT                 0x4D
-/*======== End of PAL events definiton =================*/
+/*======== End of PAL events definition =================*/
 
 
 /*======== Timeouts (not part of HCI cmd, but input to PAL engine) =========*/
@@ -430,7 +430,7 @@ typedef struct  hci_event_hw_err_t {
     u8 hw_err_code;
 } POSTPACK HCI_EVENT_HW_ERR;
 
-/* Flush occured event */
+/* Flush occurred event */
 /* Qos Violation event */
 typedef struct  hci_event_handle_t {
     u8 event_code;
diff --git a/drivers/staging/ath6kl/include/common/dbglog.h b/drivers/staging/ath6kl/include/common/dbglog.h
index 3a3d00da0b8..b7a123086cc 100644
--- a/drivers/staging/ath6kl/include/common/dbglog.h
+++ b/drivers/staging/ath6kl/include/common/dbglog.h
@@ -44,7 +44,7 @@ extern "C" {
 #define DBGLOG_MODULEID_NUM_MAX          16 /* Upper limit is width of mask */
 
 /*
- * Please ensure that the definition of any new module intrduced is captured
+ * Please ensure that the definition of any new module introduced is captured
  * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The 
  * structure is required for the parser to correctly pick up the values for
  * different modules.
diff --git a/drivers/staging/ath6kl/include/common/epping_test.h b/drivers/staging/ath6kl/include/common/epping_test.h
index 5c40d8a2229..7027fac8f37 100644
--- a/drivers/staging/ath6kl/include/common/epping_test.h
+++ b/drivers/staging/ath6kl/include/common/epping_test.h
@@ -92,7 +92,7 @@ typedef PREPACK struct {
 #define EPPING_CMD_RESET_RECV_CNT       2   /* reset recv count */
 #define EPPING_CMD_CAPTURE_RECV_CNT     3   /* fetch recv count, 4-byte count returned in CmdBuffer_t */
 #define EPPING_CMD_NO_ECHO              4   /* non-echo packet test (tx-only) */
-#define EPPING_CMD_CONT_RX_START        5   /* continous RX packets, parameters are in CmdBuffer_h */
+#define EPPING_CMD_CONT_RX_START        5   /* continuous RX packets, parameters are in CmdBuffer_h */
 #define EPPING_CMD_CONT_RX_STOP         6   /* stop continuous RX packet transmission */
 
     /* test command parameters may be no more than 8 bytes */
diff --git a/drivers/staging/ath6kl/include/common/ini_dset.h b/drivers/staging/ath6kl/include/common/ini_dset.h
index 8bfc75940c8..a9e05fa0f65 100644
--- a/drivers/staging/ath6kl/include/common/ini_dset.h
+++ b/drivers/staging/ath6kl/include/common/ini_dset.h
@@ -31,7 +31,7 @@
  */
 typedef enum {
 #if defined(AR6002_REV4) || defined(AR6003)
-/* Add these definitions for compatability  */
+/* Add these definitions for compatibility  */
 #define WHAL_INI_DATA_ID_BB_RFGAIN_LNA1 WHAL_INI_DATA_ID_BB_RFGAIN
 #define WHAL_INI_DATA_ID_BB_RFGAIN_LNA2 WHAL_INI_DATA_ID_BB_RFGAIN
     WHAL_INI_DATA_ID_NULL               =0,
diff --git a/drivers/staging/ath6kl/include/common/testcmd.h b/drivers/staging/ath6kl/include/common/testcmd.h
index 9ca1f2ac2cb..7d94aee508b 100644
--- a/drivers/staging/ath6kl/include/common/testcmd.h
+++ b/drivers/staging/ath6kl/include/common/testcmd.h
@@ -43,8 +43,8 @@ typedef enum {
     PN15_PATTERN
 }TX_DATA_PATTERN;
 
-/* Continous tx
-   mode : TCMD_CONT_TX_OFF - Disabling continous tx
+/* Continuous tx
+   mode : TCMD_CONT_TX_OFF - Disabling continuous tx
           TCMD_CONT_TX_SINE - Enable continuous unmodulated tx
           TCMD_CONT_TX_FRAME- Enable continuous modulated tx
    freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g)
diff --git a/drivers/staging/ath6kl/include/common/wmi.h b/drivers/staging/ath6kl/include/common/wmi.h
index c645af37344..4e634348536 100644
--- a/drivers/staging/ath6kl/include/common/wmi.h
+++ b/drivers/staging/ath6kl/include/common/wmi.h
@@ -1568,8 +1568,8 @@ typedef PREPACK struct {
                                    switch to ps-poll mode
                                   default = 3 */
 
-	u32 scoContStompMax;   /* max number of continous stomp allowed in opt mode.
-                                   if excedded switch to pspoll mode
+	u32 scoContStompMax;   /* max number of continuous stomp allowed in opt mode.
+                                   if exceeded switch to pspoll mode
                                     default = 3 */
 
 	u32 scoMinlowRateMbps; /* Low rate threshold */
@@ -2084,7 +2084,7 @@ typedef PREPACK struct {
 /*
  * BSS INFO HDR version 2.0
  * With 6 bytes HTC header and 6 bytes of WMI header
- * WMI_BSS_INFO_HDR cannot be accomodated in the removed 802.11 management
+ * WMI_BSS_INFO_HDR cannot be accommodated in the removed 802.11 management
  * header space.
  * - Reduce the ieMask to 2 bytes as only two bit flags are used
  * - Remove rssi and compute it on the host. rssi = snr - 95
@@ -2911,7 +2911,7 @@ typedef PREPACK struct {
     u8 pktID; /* packet ID to identify parent packet */
     u8 rateIdx; /* rate index on successful transmission */
     u8 ackFailures; /* number of ACK failures in tx attempt */
-#if 0 /* optional params currently ommitted. */
+#if 0 /* optional params currently omitted. */
     u32 queueDelay; // usec delay measured Tx Start time - host delivery time
     u32 mediaDelay; // usec delay measured ACK rx time - host delivery time
 #endif
diff --git a/drivers/staging/ath6kl/include/common/wmix.h b/drivers/staging/ath6kl/include/common/wmix.h
index 5ebb8285d13..36acba66d49 100644
--- a/drivers/staging/ath6kl/include/common/wmix.h
+++ b/drivers/staging/ath6kl/include/common/wmix.h
@@ -191,7 +191,7 @@ typedef PREPACK struct {
 } POSTPACK WMIX_GPIO_INTR_ACK_CMD;
 
 /*
- * Target informs Host of GPIO interrupts that have ocurred since the
+ * Target informs Host of GPIO interrupts that have occurred since the
  * last WMIX_GIPO_INTR_ACK_CMD was received.  Additional information --
  * the current GPIO input values is provided -- in order to support
  * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
diff --git a/drivers/staging/ath6kl/include/htc_api.h b/drivers/staging/ath6kl/include/htc_api.h
index 1bc2488788a..4fb767559f8 100644
--- a/drivers/staging/ath6kl/include/htc_api.h
+++ b/drivers/staging/ath6kl/include/htc_api.h
@@ -209,7 +209,7 @@ struct htc_endpoint_credit_dist {
 typedef enum _HTC_CREDIT_DIST_REASON {
     HTC_CREDIT_DIST_SEND_COMPLETE = 0,     /* credits available as a result of completed
                                               send operations (MANDATORY) resulting in credit reports */
-    HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1,   /* a change in endpoint activity occured (OPTIONAL) */
+    HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1,   /* a change in endpoint activity occurred (OPTIONAL) */
     HTC_CREDIT_DIST_SEEK_CREDITS,          /* an endpoint needs to "seek" credits (OPTIONAL) */
     HTC_DUMP_CREDIT_STATE                  /* for debugging, dump any state information that is kept by
                                               the distribution function */
@@ -253,7 +253,7 @@ struct htc_endpoint_stats {
     u32 RxPacketsBundled;       /* count of recv packets received in a bundle */
     u32 RxBundleLookAheads;     /* count of number of bundled lookaheads */
     u32 RxBundleIndFromHdr;     /* count of the number of bundle indications from the HTC header */
-    u32 RxAllocThreshHit;       /* count of the number of times the recv allocation threshhold was hit */
+    u32 RxAllocThreshHit;       /* count of the number of times the recv allocation threshold was hit */
     u32 RxAllocThreshBytes;     /* total number of bytes */
 };
 
@@ -391,7 +391,7 @@ int    HTCSendPkt(HTC_HANDLE HTCHandle, struct htc_packet *pPacket);
 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
 void        HTCStop(HTC_HANDLE HTCHandle);
 /*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-  @desc: Destory HTC service
+  @desc: Destroy HTC service
   @function name: HTCDestroy
   @input: HTCHandle 
   @output:
diff --git a/drivers/staging/ath6kl/miscdrv/credit_dist.c b/drivers/staging/ath6kl/miscdrv/credit_dist.c
index ae54e1f48e5..33fa0209026 100644
--- a/drivers/staging/ath6kl/miscdrv/credit_dist.c
+++ b/drivers/staging/ath6kl/miscdrv/credit_dist.c
@@ -341,7 +341,7 @@ static void SeekCredits(struct common_credit_state_info *pCredInfo,
         credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
 
         if (credits >= pEPDist->TxCreditsSeek) {
-                /* we found some to fullfill the seek request */
+                /* we found some to fulfill the seek request */
             break;
         }
 
@@ -364,8 +364,8 @@ static void SeekCredits(struct common_credit_state_info *pCredInfo,
 
             if ((pCurEpDist->TxCreditsAssigned - need) >= pCurEpDist->TxCreditsMin) {
                     /* the current one has been allocated more than it's minimum and it
-                     * has enough credits assigned above it's minimum to fullfill our need
-                     * try to take away just enough to fullfill our need */
+                     * has enough credits assigned above it's minimum to fulfill our need
+                     * try to take away just enough to fulfill our need */
                 ReduceCredits(pCredInfo,
                               pCurEpDist,
                               pCurEpDist->TxCreditsAssigned - need);
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_android.c b/drivers/staging/ath6kl/os/linux/ar6000_android.c
index c96f6e9c99c..4aa75ee2cb1 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_android.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_android.c
@@ -372,7 +372,7 @@ void android_ar6k_check_wow_status(struct ar6_softc *ar, struct sk_buff *skb, bo
             }
         }
         if (needWake) {
-            /* keep host wake up if there is any event and packate comming in*/
+            /* keep host wake up if there is any event and packate coming in*/
             if (wowledon) {
                 char buf[32];
                 int len = sprintf(buf, "on");
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index 27cb02dfad3..97d6ce63b5c 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -520,7 +520,7 @@ dbglog_parse_debug_logs(s8 *datap, u32 len)
 int
 ar6000_dbglog_get_debug_logs(struct ar6_softc *ar)
 {
-    u32 data[8]; /* Should be able to accomodate struct dbglog_buf_s */
+    u32 data[8]; /* Should be able to accommodate struct dbglog_buf_s */
     u32 address;
     u32 length;
     u32 dropped;
@@ -2063,7 +2063,7 @@ ar6000_stop_endpoint(struct net_device *dev, bool keepprofile, bool getdbglogs)
  * - In case of surprise removal, the hcd already frees up the pending
  *   for the device and hence there is no need to unregister the function
  *   driver inorder to get these requests. For planned removal, the function
- *   driver has to explictly unregister itself to have the hcd return all the
+ *   driver has to explicitly unregister itself to have the hcd return all the
  *   pending requests before the data structures for the devices are freed up.
  *   Note that as per the current implementation, the function driver will
  *   end up releasing all the devices since there is no API to selectively
@@ -2982,7 +2982,7 @@ ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
     /* If target is not associated */
     if( (!ar->arConnected && !bypasswmi)
 #ifdef CONFIG_HOST_TCMD_SUPPORT
-     /* TCMD doesnt support any data, free the buf and return */
+     /* TCMD doesn't support any data, free the buf and return */
     || (ar->arTargetMode == AR6000_TCMD_MODE)
 #endif
                                             ) {
@@ -6393,7 +6393,7 @@ static void DoHTCSendPktsTest(struct ar6_softc *ar, int MapNo, HTC_ENDPOINT_ID e
 /*
  * Add support for adding and removing a virtual adapter for soft AP.
  * Some OS requires different adapters names for station and soft AP mode.
- * To support these requirement, create and destory a netdevice  instance
+ * To support these requirement, create and destroy a netdevice  instance
  * when the AP mode is operational. A full fledged support for virual device
  * is not implemented. Rather a virtual interface is created and is linked
  * with the existing physical device instance during the operation of the 
diff --git a/drivers/staging/ath6kl/wmi/wmi.c b/drivers/staging/ath6kl/wmi/wmi.c
index 0ddaee21f9d..a00bf0a5987 100644
--- a/drivers/staging/ath6kl/wmi/wmi.c
+++ b/drivers/staging/ath6kl/wmi/wmi.c
@@ -4867,7 +4867,7 @@ wmi_set_country(struct wmi_t *wmip, u8 *countryCode)
 #ifdef CONFIG_HOST_TCMD_SUPPORT
 /* WMI  layer doesn't need to know the data type of the test cmd.
    This would be beneficial for customers like Qualcomm, who might
-   have different test command requirements from differnt manufacturers
+   have different test command requirements from different manufacturers
  */
 int
 wmi_test_cmd(struct wmi_t *wmip, u8 *buf, u32 len)
diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 32909e2938d..20cca24ff5f 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -412,7 +412,7 @@ struct _MINI_ADAPTER
 
 	// this to keep track of the Tx and Rx MailBox Registers.
 	atomic_t		    CurrNumFreeTxDesc;
-	// to keep track the no of byte recieved
+	// to keep track the no of byte received
 	USHORT				PrevNumRecvDescs;
 	USHORT				CurrNumRecvDescs;
 	UINT				u32TotalDSD;
@@ -527,7 +527,7 @@ struct _MINI_ADAPTER
 	BOOLEAN			bStatusWrite;
 	UINT			uiNVMDSDSize;
 	UINT			uiVendorExtnFlag;
-	 //it will always represent choosed DSD at any point of time.
+	 //it will always represent chosen DSD at any point of time.
 	 // Generally it is Active DSD but in case of NVM RD/WR it might be different.
 	UINT			ulFlashCalStart;
 	ULONG                   ulFlashControlSectionStart;
@@ -546,10 +546,10 @@ struct _MINI_ADAPTER
 	PFLASH_CS_INFO psFlashCSInfo ;
 	PFLASH2X_VENDORSPECIFIC_INFO psFlash2xVendorInfo;
 	UINT uiFlashBaseAdd; //Flash start address
-	UINT uiActiveISOOffset; //Active ISO offset choosen before f/w download
+	UINT uiActiveISOOffset; //Active ISO offset chosen before f/w download
 	FLASH2X_SECTION_VAL eActiveISO; //Active ISO section val
-	FLASH2X_SECTION_VAL eActiveDSD;	//Active DSD val choosen before f/w download
-	UINT uiActiveDSDOffsetAtFwDld;  //For accessing Active DSD choosen before f/w download
+	FLASH2X_SECTION_VAL eActiveDSD;	//Active DSD val chosen before f/w download
+	UINT uiActiveDSDOffsetAtFwDld;  //For accessing Active DSD chosen before f/w download
 	UINT uiFlashLayoutMajorVersion ;
 	UINT uiFlashLayoutMinorVersion;
 	BOOLEAN bAllDSDWriteAllow ;
diff --git a/drivers/staging/bcm/CmHost.c b/drivers/staging/bcm/CmHost.c
index 9be184f143e..c0ee95a7134 100644
--- a/drivers/staging/bcm/CmHost.c
+++ b/drivers/staging/bcm/CmHost.c
@@ -384,7 +384,7 @@ static inline VOID CopyClassifierRuleToSF(PMINI_ADAPTER Adapter,stConvergenceSLT
 		}
 		if(psfCSType->cCPacketClassificationRule.u8Protocol == 0)
 		{
-			//we didnt get protocol field filled in by the BS
+			//we didn't get protocol field filled in by the BS
 			pstClassifierEntry->ucProtocolLength=0;
 		}
 		else
@@ -879,7 +879,7 @@ static VOID CopyToAdapter( register PMINI_ADAPTER Adapter,		/**<Pointer to the A
 
 						/*
 							Passing the argument u8PHSI instead of clsid. Because for DL with no classifier rule,
-							clsid will be zero hence we cant have multiple PHS rules for the same SF.
+							clsid will be zero hence we can't have multiple PHS rules for the same SF.
 							To support multiple PHS rule, passing u8PHSI.
 						*/
 
@@ -1103,7 +1103,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
 	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  "u8TrafficIndicationPreference	: 0x%X",
 		pstAddIndication->sfAuthorizedSet.u8TrafficIndicationPreference);
 
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved		: 0x%X",pstAddIndication->sfAuthorizedSet.u8TotalClassifiers);
+	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received		: 0x%X",pstAddIndication->sfAuthorizedSet.u8TotalClassifiers);
 
 	nCurClassifierCnt = pstAddIndication->sfAuthorizedSet.u8TotalClassifiers;
 
@@ -1305,7 +1305,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
 	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  "u8TrafficIndicationPreference	: 0x%02X",
 		pstAddIndication->sfAdmittedSet.u8TrafficIndicationPreference);
 
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved		: 0x%X",pstAddIndication->sfAdmittedSet.u8TotalClassifiers);
+	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received		: 0x%X",pstAddIndication->sfAdmittedSet.u8TotalClassifiers);
 
 	nCurClassifierCnt = pstAddIndication->sfAdmittedSet.u8TotalClassifiers;
 
@@ -1502,7 +1502,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
 	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " u8TrafficIndicationPreference	: 0x%X",
 		pstAddIndication->sfActiveSet.u8TrafficIndicationPreference);
 
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved		: 0x%X",pstAddIndication->sfActiveSet.u8TotalClassifiers);
+	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received		: 0x%X",pstAddIndication->sfActiveSet.u8TotalClassifiers);
 
 	nCurClassifierCnt = pstAddIndication->sfActiveSet.u8TotalClassifiers;
 
@@ -1696,7 +1696,7 @@ ULONG StoreCmControlResponseMessage(PMINI_ADAPTER Adapter,PVOID pvBuffer,UINT *p
 		//No Special handling send the message as it is
 		return 1;
 	}
-	// For DSA_REQ, only upto "psfAuthorizedSet" parameter should be accessed by driver!
+	// For DSA_REQ, only up to "psfAuthorizedSet" parameter should be accessed by driver!
 
 	pstAddIndication=kmalloc(sizeof(*pstAddIndication), GFP_KERNEL);
 	if(NULL==pstAddIndication)
@@ -1788,7 +1788,7 @@ static inline stLocalSFAddIndicationAlt
 	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Inside RestoreCmControlResponseMessage ");
 	/*
 	//Need to Allocate memory to contain the SUPER Large structures
-	//Our driver cant create these structures on Stack :(
+	//Our driver can't create these structures on Stack :(
 	*/
 	pstAddIndicationDest=kmalloc(sizeof(stLocalSFAddIndicationAlt), GFP_KERNEL);
 
@@ -1957,7 +1957,7 @@ INT AllocAdapterDsxBuffer(PMINI_ADAPTER Adapter)
 {
 	/*
 	//Need to Allocate memory to contain the SUPER Large structures
-	//Our driver cant create these structures on Stack
+	//Our driver can't create these structures on Stack
 	*/
 	Adapter->caDsxReqResp=kmalloc(sizeof(stLocalSFAddIndicationAlt)+LEADER_SIZE, GFP_KERNEL);
 	if(!Adapter->caDsxReqResp)
diff --git a/drivers/staging/bcm/HostMIBSInterface.h b/drivers/staging/bcm/HostMIBSInterface.h
index f17a4f13474..e34531b638e 100644
--- a/drivers/staging/bcm/HostMIBSInterface.h
+++ b/drivers/staging/bcm/HostMIBSInterface.h
@@ -62,7 +62,7 @@ typedef struct _S_MIBS_HOST_INFO
 	ULONG			NumDesUsed;
 	ULONG			CurrNumFreeDesc;
 	ULONG			PrevNumFreeDesc;
-	// to keep track the no of byte recieved
+	// to keep track the no of byte received
 	ULONG			PrevNumRcevBytes;
 	ULONG			CurrNumRcevBytes;
 
diff --git a/drivers/staging/bcm/IPv6Protocol.c b/drivers/staging/bcm/IPv6Protocol.c
index 91b6fbe33c9..5b4fd372ec3 100644
--- a/drivers/staging/bcm/IPv6Protocol.c
+++ b/drivers/staging/bcm/IPv6Protocol.c
@@ -287,7 +287,7 @@ static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Head
 
 	for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
 	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Recieved Packet : \n ");
+		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n ");
 		DumpIpv6Address(aulSrcIP);
 		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n");
 		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]);
@@ -340,7 +340,7 @@ static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Hea
 
 	for(uiLoopIndex=0;uiLoopIndex<uiCountIPDestinationAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
 	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Recieved Packet : \n ");
+		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Received Packet : \n ");
 		DumpIpv6Address(aulDestIP);
 		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Mask In Classifier Rule: \n");
 		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]);
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index bf5c0ad8661..96fa4ead793 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -11,7 +11,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:				BCM_STATUS_SUCCESS - If Wakeup of the HW Interface was successful.
-						Other           - If an error occured.
+						Other           - If an error occurred.
 */
 
 
@@ -26,7 +26,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:				BCM_STATUS_SUCCESS - If Idle mode response related HW configuration was successful.
-						Other           - If an error occured.
+						Other           - If an error occurred.
 */
 
 /*
diff --git a/drivers/staging/bcm/InterfaceIsr.c b/drivers/staging/bcm/InterfaceIsr.c
index 220ff922bdc..67719d57256 100644
--- a/drivers/staging/bcm/InterfaceIsr.c
+++ b/drivers/staging/bcm/InterfaceIsr.c
@@ -80,8 +80,8 @@ static void read_int_callback(struct urb *urb/*, struct pt_regs *regs*/)
 		}
 		case -EINPROGRESS:
 		{
-			//This situation may happend when URBunlink is used. for detail check usb_unlink_urb documentation.
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occured... something very bad is going on");
+			//This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation.
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
 			break ;
 			//return;
 		}
diff --git a/drivers/staging/bcm/InterfaceRx.c b/drivers/staging/bcm/InterfaceRx.c
index 533f8ebe0f8..806ef5d1852 100644
--- a/drivers/staging/bcm/InterfaceRx.c
+++ b/drivers/staging/bcm/InterfaceRx.c
@@ -34,7 +34,7 @@ GetBulkInRcb(PS_INTERFACE_ADAPTER psIntfAdapter)
 	return pRcb;
 }
 
-/*this is receive call back - when pkt avilable for receive (BULK IN- end point)*/
+/*this is receive call back - when pkt available for receive (BULK IN- end point)*/
 static void read_bulk_callback(struct urb *urb)
 {
 	struct sk_buff *skb = NULL;
@@ -123,7 +123,7 @@ static void read_bulk_callback(struct urb *urb)
 	if((ntohs(pLeader->Vcid) == VCID_CONTROL_PACKET) ||
 	    (!(pLeader->Status >= 0x20  &&  pLeader->Status <= 0x3F)))
 	{
-	    BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_CTRL, DBG_LVL_ALL, "Recived control pkt...");
+	    BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_CTRL, DBG_LVL_ALL, "Received control pkt...");
 		*(PUSHORT)skb->data = pLeader->Status;
        	memcpy(skb->data+sizeof(USHORT), urb->transfer_buffer +
 			(sizeof(LEADER)), pLeader->PLength);
@@ -142,7 +142,7 @@ static void read_bulk_callback(struct urb *urb)
 		  * Data Packet, Format a proper Ethernet Header
         	  * and give it to the stack
 		  */
-        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Recived Data pkt...");
+        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Received Data pkt...");
 		skb_reserve(skb, 2 + SKB_RESERVE_PHS_BYTES);
 		memcpy(skb->data+ETH_HLEN, (PUCHAR)urb->transfer_buffer + sizeof(LEADER), pLeader->PLength);
 		skb->dev = Adapter->dev;
@@ -151,7 +151,7 @@ static void read_bulk_callback(struct urb *urb)
 		skb_put (skb, pLeader->PLength + ETH_HLEN);
 		Adapter->PackInfo[QueueIndex].uiTotalRxBytes+=pLeader->PLength;
 		Adapter->PackInfo[QueueIndex].uiThisPeriodRxBytes+= pLeader->PLength;
-        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Recived Data pkt of len :0x%X", pLeader->PLength);
+        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Received Data pkt of len :0x%X", pLeader->PLength);
 
 		if(netif_running(Adapter->dev))
 		{
@@ -237,7 +237,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:				TRUE  - If Rx was successful.
-					Other - If an error occured.
+					Other - If an error occurred.
 */
 
 BOOLEAN InterfaceRx (PS_INTERFACE_ADAPTER psIntfAdapter)
diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h
index e4f8eb70be1..f859cf1c47b 100644
--- a/drivers/staging/bcm/Ioctl.h
+++ b/drivers/staging/bcm/Ioctl.h
@@ -241,7 +241,7 @@ typedef struct bulkwrmbuffer
 
 typedef enum _FLASH2X_SECTION_VAL
 {
-	NO_SECTION_VAL = 0, //no section is choosen when absolute offset is given for RD/WR
+	NO_SECTION_VAL = 0, //no section is chosen when absolute offset is given for RD/WR
 	ISO_IMAGE1,
 	ISO_IMAGE2,
 	DSD0,
diff --git a/drivers/staging/bcm/LeakyBucket.c b/drivers/staging/bcm/LeakyBucket.c
index f4cf41c0e46..a55d4228e8e 100644
--- a/drivers/staging/bcm/LeakyBucket.c
+++ b/drivers/staging/bcm/LeakyBucket.c
@@ -213,7 +213,7 @@ static VOID CheckAndSendPacketFromIndex(PMINI_ADAPTER Adapter, PacketInfo *psSF)
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "For Queue: %zd\n", psSF-Adapter->PackInfo);
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "\nAvailable Tokens = %d required = %d\n",
 					psSF->uiCurrentTokenCount, iPacketLen);
-				//this part indicates that becuase of non-availability of the tokens
+				//this part indicates that because of non-availability of the tokens
 				//pkt has not been send out hence setting the pending flag indicating the host to send it out
 				//first next iteration  .
 				psSF->uiPendedLast = TRUE;
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index d624f35d055..c5003b62234 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -602,7 +602,7 @@ VOID LinkControlResponseMessage(PMINI_ADAPTER Adapter,PUCHAR pucBuffer)
 				Adapter->LinkStatus=LINKUP_DONE;
 				Adapter->bPHSEnabled = *(pucBuffer+3);
                	Adapter->bETHCSEnabled = *(pucBuffer+4) & ETH_CS_MASK;
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Recieved In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
+				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Received In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
 				if((FALSE == Adapter->bShutStatus)&&
 					(FALSE == Adapter->IdleMode))
 				{
@@ -1153,7 +1153,7 @@ int InitCardAndDownloadFirmware(PMINI_ADAPTER ps_adapter)
 
 	/*
      * 1. If the LED Settings fails, do not stop and do the Firmware download.
-     * 2. This init would happend only if the cfg file is present, else
+     * 2. This init would happened only if the cfg file is present, else
      *    call from the ioctl context.
      */
 
@@ -1185,7 +1185,7 @@ int InitCardAndDownloadFirmware(PMINI_ADAPTER ps_adapter)
 		status = PropagateCalParamsFromFlashToMemory(ps_adapter);
 		if(status)
 		{
-			BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL," Propogation of Cal param failed .." );
+			BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL," Propagation of Cal param failed .." );
 			goto OUT;
 		}
 	}
diff --git a/drivers/staging/bcm/Qos.c b/drivers/staging/bcm/Qos.c
index feade9451b2..c97020f0fb6 100644
--- a/drivers/staging/bcm/Qos.c
+++ b/drivers/staging/bcm/Qos.c
@@ -727,7 +727,7 @@ static BOOLEAN EthCSMatchVLANRules(S_CLASSIFIER_RULE *pstClassifierRule,struct s
 
 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "%s  CLS UserPrio:%x CLS VLANID:%x\n",__FUNCTION__,ntohs(*((USHORT *)pstClassifierRule->usUserPriority)),pstClassifierRule->usVLANID);
 
-	/* In case FW didn't recieve the TLV, the priority field should be ignored */
+	/* In case FW didn't receive the TLV, the priority field should be ignored */
 	if(pstClassifierRule->usValidityBitMap & (1<<PKT_CLASSIFICATION_USER_PRIORITY_VALID))
 	{
 		if(pstEthCsPktInfo->eNwpktEthFrameType!=eEth802QVLANFrame)
diff --git a/drivers/staging/bcm/cntrl_SignalingInterface.h b/drivers/staging/bcm/cntrl_SignalingInterface.h
index 890778450a8..ab131806e2c 100644
--- a/drivers/staging/bcm/cntrl_SignalingInterface.h
+++ b/drivers/staging/bcm/cntrl_SignalingInterface.h
@@ -21,7 +21,7 @@
 #define VENDOR_PHS_PARAM_LENGTH 10
 #define MAX_NUM_ACTIVE_BS 10
 #define AUTH_TOKEN_LENGTH	10
-#define NUM_HARQ_CHANNELS	16	//Changed from 10 to 16 to accomodate all HARQ channels
+#define NUM_HARQ_CHANNELS	16	//Changed from 10 to 16 to accommodate all HARQ channels
 #define VENDOR_CLASSIFIER_PARAM_LENGTH 1 //Changed the size to 1 byte since we dnt use it
 #define  VENDOR_SPECIF_QOS_PARAM 1
 #define VENDOR_PHS_PARAM_LENGTH	10
@@ -109,13 +109,13 @@ typedef struct _stPhsRuleSI {
     B_UINT8                         u8PHSI;
 	/**  PHSF Length Of The Service Flow*/
     B_UINT8                         u8PHSFLength;
-    /** String of bytes containing header information to be supressed by the sending CS and reconstructed by the receiving CS*/
+    /** String of bytes containing header information to be suppressed by the sending CS and reconstructed by the receiving CS*/
     B_UINT8                         u8PHSF[MAX_PHS_LENGTHS];
 	/**  PHSM Length Of The Service Flow*/
     B_UINT8                         u8PHSMLength;
 	/**  PHS Mask for the SF*/
     B_UINT8                         u8PHSM[MAX_PHS_LENGTHS];
-	/**  8bit Total number of bytes to be supressed for the Service Flow*/
+	/**  8bit Total number of bytes to be suppressed for the Service Flow*/
     B_UINT8                         u8PHSS;
 	/**  8bit Indicates whether or not Packet Header contents need to be verified prior to supression */
     B_UINT8                         u8PHSV;
diff --git a/drivers/staging/bcm/nvm.c b/drivers/staging/bcm/nvm.c
index c7292373a65..4da5b7b54a1 100644
--- a/drivers/staging/bcm/nvm.c
+++ b/drivers/staging/bcm/nvm.c
@@ -313,7 +313,7 @@ INT ReadMacAddressFromNVM(PMINI_ADAPTER Adapter)
 //		uiNumBytes - Number of bytes to be read from the EEPROM.
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if EEPROM read is successfull.
+//		OSAL_STATUS_SUCCESS - if EEPROM read is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -431,7 +431,7 @@ INT BeceemEEPROMBulkRead(
 //		uiNumBytes - Number of bytes to be read from the FLASH.
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if FLASH read is successfull.
+//		OSAL_STATUS_SUCCESS - if FLASH read is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -1174,7 +1174,7 @@ static INT BeceemFlashBulkWrite(
 	if(NULL == pTempBuff)
 		goto BeceemFlashBulkWrite_EXIT;
 //
-// check if the data to be written is overlapped accross sectors
+// check if the data to be written is overlapped across sectors
 //
 	if(uiOffset+uiNumBytes < uiSectBoundary)
 	{
@@ -1390,7 +1390,7 @@ static INT BeceemFlashBulkWriteStatus(
 		goto BeceemFlashBulkWriteStatus_EXIT;
 
 //
-// check if the data to be written is overlapped accross sectors
+// check if the data to be written is overlapped across sectors
 //
 	if(uiOffset+uiNumBytes < uiSectBoundary)
 	{
@@ -2020,7 +2020,7 @@ INT BeceemEEPROMBulkWrite(
 //		uiNumBytes - Number of bytes to be read from the NVM.
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if NVM read is successfull.
+//		OSAL_STATUS_SUCCESS - if NVM read is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -2083,7 +2083,7 @@ INT BeceemNVMRead(
 //		uiNumBytes - Number of bytes to be written..
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if NVM write is successfull.
+//		OSAL_STATUS_SUCCESS - if NVM write is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -2218,7 +2218,7 @@ INT BeceemNVMWrite(
 //          uiSectorSize - sector size
 //
 // Returns:
-//		OSAL_STATUS_SUCCESS - if NVM write is successfull.
+//		OSAL_STATUS_SUCCESS - if NVM write is successful.
 //		<FAILURE>			- if failed.
 //-----------------------------------------------------------------------------
 
@@ -2430,7 +2430,7 @@ INT BcmInitNVM(PMINI_ADAPTER ps_adapter)
 *Input Parameter:
 *		Adapter data structure
 *Return Value :
-*		0. means sucess;
+*		0. means success;
 */
 /***************************************************************************/
 
@@ -2998,7 +2998,7 @@ INT BcmGetSectionValStartOffset(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlas
 	/*
 	*	Considering all the section for which end offset can be calculated or directly given
 	*	in CS Structure. if matching case does not exist, return STATUS_FAILURE indicating section
-	*	endoffset can't be calculated or given in CS Stucture.
+	*	endoffset can't be calculated or given in CS Structure.
 	*/
 
 	INT SectStartOffset = 0 ;
@@ -3173,7 +3173,7 @@ INT BcmGetSectionValEndOffset(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2
 *	@uiNumBytes : Number of Bytes for Read
 *
 *	Return value:-
-*		return true on sucess and STATUS_FAILURE on fail.
+*		return true on success and STATUS_FAILURE on fail.
 */
 
 INT BcmFlash2xBulkRead(
@@ -3241,7 +3241,7 @@ INT BcmFlash2xBulkRead(
 *	@uiNumBytes : Number of Bytes for Write
 *
 *	Return value:-
-*		return true on sucess and STATUS_FAILURE on fail.
+*		return true on success and STATUS_FAILURE on fail.
 *
 */
 
@@ -3308,7 +3308,7 @@ INT BcmFlash2xBulkWrite(
 *	@Adapter :-Drivers private Data Structure
 *
 *	Return Value:-
-*		Return STATUS_SUCESS if get sucess in setting the right DSD else negaive error code
+*		Return STATUS_SUCESS if get success in setting the right DSD else negaive error code
 *
 **/
 static INT BcmGetActiveDSD(PMINI_ADAPTER Adapter)
@@ -3384,7 +3384,7 @@ static INT BcmGetActiveISO(PMINI_ADAPTER Adapter)
 *	@uiOffset : Offset provided in the Flash
 *
 *	Return Value:-
-*	Sucess:-TRUE ,  offset is writable
+*	Success:-TRUE ,  offset is writable
 *	Failure:-FALSE, offset is RO
 *
 **/
@@ -3441,7 +3441,7 @@ static INT BcmDumpFlash2xSectionBitMap(PFLASH2X_BITMAP psFlash2xBitMap)
 	@Adapter:-Driver private Data Structure
 *
 *	Return value:-
-*	Sucess:- STATUS_SUCESS
+*	Success:- STATUS_SUCESS
 *	Failure:- negative error code
 **/
 
@@ -3783,7 +3783,7 @@ INT BcmSetActiveSection(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSectV
 					// This is a SPECIAL Case which will only happen if the current highest priority ISO has priority value = 0x7FFFFFFF.
 					// We will write 1 to the current Highest priority ISO And then shall increase the priority of the requested ISO
 					// by user
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happend, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
 					SectImagePriority = htonl(0x1);
 					Status = BcmFlash2xBulkWrite(Adapter,
 								&SectImagePriority,
@@ -3853,7 +3853,7 @@ INT BcmSetActiveSection(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSectV
 					// This is a SPECIAL Case which will only happen if the current highest priority DSD has priority value = 0x7FFFFFFF.
 					// We will write 1 to the current Highest priority DSD And then shall increase the priority of the requested DSD
 					// by user
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happend, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
+					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
 					SectImagePriority = htonl(0x1);
 
 					Status = BcmFlash2xBulkWrite(Adapter,
@@ -4119,7 +4119,7 @@ INT BcmCopyISO(PMINI_ADAPTER Adapter, FLASH2X_COPY_SECTION sCopySectStrut)
 												MAX_RW_SIZE);
 				IsThisHeaderSector = FALSE ;
 			}
-			//substracting the written Data
+			//subtracting the written Data
 			uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize ;
 		}
 
@@ -4250,7 +4250,7 @@ INT BcmCopyISO(PMINI_ADAPTER Adapter, FLASH2X_COPY_SECTION sCopySectStrut)
 				IsThisHeaderSector = FALSE ;
 			}
 
-			//substracting the written Data
+			//subtracting the written Data
 			uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize ;
 		}
 
@@ -4268,7 +4268,7 @@ BcmFlash2xCorruptSig : this API is used to corrupt the written sig in Bcm Header
 @eFlash2xSectionVal :- Flash section val which has header
 
 Return Value :-
-	Sucess :- If Section is present and writable, corrupt the sig and return STATUS_SUCCESS
+	Success :- If Section is present and writable, corrupt the sig and return STATUS_SUCCESS
 	Failure :-Return negative error code
 
 
@@ -4301,7 +4301,7 @@ BcmFlash2xWriteSig :-this API is used to Write the sig if requested Section has
 @eFlashSectionVal :- Flash section val which has header
 
 Return Value :-
-	Sucess :- If Section is present and writable write the sig and return STATUS_SUCCESS
+	Success :- If Section is present and writable write the sig and return STATUS_SUCCESS
 	Failure :-Return negative error code
 
 **/
@@ -4504,7 +4504,7 @@ BcmCopySection :- This API is used to copy the One section in another. Both sect
 			     in case of numofBytes  equal zero complete section will be copied.
 
 Return Values-
-	Sucess : Return STATUS_SUCCESS
+	Success : Return STATUS_SUCCESS
 	Faillure :- return negative error code
 
 **/
@@ -4621,7 +4621,7 @@ SaveHeaderIfPresent :- This API is use to Protect the Header in case of Header S
 @uiOffset :- Flash offset that has to be written.
 
 Return value :-
-	Sucess :- On sucess return STATUS_SUCCESS
+	Success :- On success return STATUS_SUCCESS
 	Faillure :- Return negative error code
 
 **/
@@ -4634,7 +4634,7 @@ INT SaveHeaderIfPresent(PMINI_ADAPTER Adapter, PUCHAR pBuff, UINT uiOffset)
 	UINT uiSectAlignAddr = 0;
 	UINT sig = 0;
 
-	//making the offset sector alligned
+	//making the offset sector aligned
 	uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
 
 
@@ -4643,7 +4643,7 @@ INT SaveHeaderIfPresent(PMINI_ADAPTER Adapter, PUCHAR pBuff, UINT uiOffset)
 	(uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter,DSD0)- Adapter->uiSectorSize))
 	{
 
-		//offset from the sector boundry having the header map
+		//offset from the sector boundary having the header map
 		offsetToProtect = Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader % Adapter->uiSectorSize;
 		HeaderSizeToProtect = sizeof(DSD_HEADER);
 		bHasHeader = TRUE ;
@@ -4697,7 +4697,7 @@ BcmDoChipSelect : This will selcet the appropriate chip for writing.
 @Adapater :- Bcm Driver Private Data Structure
 
 OutPut:-
-	Select the Appropriate chip and retrn status Sucess
+	Select the Appropriate chip and retrn status Success
 **/
 static INT BcmDoChipSelect(PMINI_ADAPTER Adapter, UINT offset)
 {
@@ -5086,7 +5086,7 @@ static INT CorruptDSDSig(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSect
 	{
 		if(IsSectionWritable(Adapter,eFlash2xSectionVal) != TRUE)
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence cant Corrupt signature");
+			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Corrupt signature");
 			return SECTOR_IS_NOT_WRITABLE;
 		}
 	}
@@ -5155,7 +5155,7 @@ static INT CorruptISOSig(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSect
 
 	if(IsSectionWritable(Adapter,eFlash2xSectionVal) != TRUE)
 	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence cant Corrupt signature");
+		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Corrupt signature");
 		return SECTOR_IS_NOT_WRITABLE;
 	}
 
diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README
index 99e67669f26..f8facb0786e 100644
--- a/drivers/staging/brcm80211/README
+++ b/drivers/staging/brcm80211/README
@@ -71,7 +71,7 @@ the driver. The devices use a single worldwide regulatory domain, with channels
 passive operation. Transmission on those channels is suppressed until
 appropriate other traffic is observed on those channels.
 
-Within the driver, we use the ficticious country code "X2" to represent this
+Within the driver, we use the fictitious country code "X2" to represent this
 worldwide regulatory domain. There is currently no interface to configure a
 different domain.
 
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 65313fa0cf4..71c3571ee14 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -264,7 +264,7 @@ extern SDIOH_API_RC sdioh_disable_func_intr(void)
 }
 #endif				/* defined(OOB_INTR_ONLY) && defined(HW_OOB) */
 
-/* Configure callback to client when we recieve client interrupt */
+/* Configure callback to client when we receive client interrupt */
 extern SDIOH_API_RC
 sdioh_interrupt_register(sdioh_info_t *sd, sdioh_cb_fn_t fn, void *argh)
 {
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
index cbfa1c1b705..1cf6c5dc2bb 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
@@ -46,7 +46,7 @@ extern int sdioh_mmc_irq(int irq);
 #include <mach/gpio.h>
 #endif
 
-/* Customer specific Host GPIO defintion  */
+/* Customer specific Host GPIO definition  */
 static int dhd_oob_gpio_num = -1;	/* GG 19 */
 
 module_param(dhd_oob_gpio_num, int, 0644);
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
index 02c6d446934..dd037579387 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
@@ -478,7 +478,7 @@ static int dhd_set_suspend(int value, dhd_pub_t *dhd)
 			dhd_set_packet_filter(1, dhd);
 
 			/* if dtim skip setup as default force it
-			 * to wake each thrid dtim
+			 * to wake each third dtim
 			 * for better power saving.
 			 * Note that side effect is chance to miss BC/MC
 			 * packet
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
index 106627040db..464f52af131 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
@@ -3659,7 +3659,7 @@ static uint dhdsdio_readframes(dhd_bus_t *bus, uint maxframes, bool *finished)
 			 * control pkt receives.
 			 * Later we use buffer-poll for data as well
 			 * as control packets.
-			 * This is required becuase dhd receives full
+			 * This is required because dhd receives full
 			 * frame in gSPI unlike SDIO.
 			 * After the frame is received we have to
 			 * distinguish whether it is data
@@ -3744,7 +3744,7 @@ static uint dhdsdio_readframes(dhd_bus_t *bus, uint maxframes, bool *finished)
 					bus->dhd->rx_errors++;
 					dhd_os_sdunlock_rxq(bus->dhd);
 					/* Force retry w/normal header read.
-					 * Don't attemp NAK for
+					 * Don't attempt NAK for
 					 * gSPI
 					 */
 					dhdsdio_rxfail(bus, true,
diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
index 774b4e916b2..c1b07ae3167 100644
--- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
+++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
@@ -1079,7 +1079,7 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
 	 */
 	hw->max_rates = 2;	/* Primary rate and 1 fallback rate */
 
-	hw->channel_change_time = 7 * 1000;	/* channel change time is dependant on chip and band  */
+	hw->channel_change_time = 7 * 1000;	/* channel change time is dependent on chip and band  */
 	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 
 	hw->rate_control_algorithm = "minstrel_ht";
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
index c6cdcd94095..f0086595788 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
@@ -89,7 +89,7 @@ u32 wl_ampdu_dbg =
 /* structure to hold tx fifo information and pre-loading state
  * counters specific to tx underflows of ampdus
  * some counters might be redundant with the ones in wlc or ampdu structures.
- * This allows to maintain a specific state independantly of
+ * This allows to maintain a specific state independently of
  * how often and/or when the wlc counters are updated.
  */
 typedef struct wlc_fifo_info {
@@ -265,7 +265,7 @@ static void scb_ampdu_update_config(struct ampdu_info *ampdu, struct scb *scb)
 
 	scb_ampdu->max_pdu = (u8) ampdu->wlc->pub->tunables->ampdunummpdu;
 
-	/* go back to legacy size if some preloading is occuring */
+	/* go back to legacy size if some preloading is occurring */
 	for (i = 0; i < NUM_FFPLD_FIFO; i++) {
 		if (ampdu->fifo_tb[i].ampdu_pld_size > FFPLD_PLD_INCR)
 			scb_ampdu->max_pdu = AMPDU_NUM_MPDU_LEGACY;
@@ -406,7 +406,7 @@ static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int fid)
 		/*
 		   compute a new dma xfer rate for max_mpdu @ max mcs.
 		   This is the minimum dma rate that
-		   can acheive no unferflow condition for the current mpdu size.
+		   can achieve no unferflow condition for the current mpdu size.
 		 */
 		/* note : we divide/multiply by 100 to avoid integer overflows */
 		fifo->dmaxferrate =
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
index 5a96dc3cdb3..4b6e181c7dc 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
@@ -1915,7 +1915,7 @@ void wlc_bmac_phy_reset(struct wlc_hw_info *wlc_hw)
 
 	phy_bw_clkbits = wlc_phy_clk_bwbits(wlc_hw->band->pi);
 
-	/* Specfic reset sequence required for NPHY rev 3 and 4 */
+	/* Specific reset sequence required for NPHY rev 3 and 4 */
 	if (WLCISNPHY(wlc_hw->band) && NREV_GE(wlc_hw->band->phyrev, 3) &&
 	    NREV_LE(wlc_hw->band->phyrev, 4)) {
 		/* Set the PHY bandwidth */
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_main.c b/drivers/staging/brcm80211/brcmsmac/wlc_main.c
index 639b5d7c960..ab7ab850e19 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_main.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_main.c
@@ -6283,7 +6283,7 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw,
 	       ((preamble_type[1] == WLC_MM_PREAMBLE) ==
 		(txh->MModeFbrLen != 0)));
 
-	ac = wme_fifo2ac[queue];
+	ac = skb_get_queue_mapping(p);
 	if (SCB_WME(scb) && qos && wlc->edcf_txop[ac]) {
 		uint frag_dur, dur, dur_fallback;
 
@@ -6919,8 +6919,7 @@ prep_mac80211_status(struct wlc_info *wlc, d11rxhdr_t *rxh, struct sk_buff *p,
 		preamble = 0;
 		if (IS_CCK(rspec)) {
 			if (rxh->PhyRxStatus_0 & PRXS0_SHORTH)
-				WL_ERROR("Short CCK\n");
-			rx_status->flag |= RX_FLAG_SHORTPRE;
+				rx_status->flag |= RX_FLAG_SHORTPRE;
 		} else if (IS_OFDM(rspec)) {
 			rx_status->flag |= RX_FLAG_SHORTPRE;
 		} else {
@@ -7079,10 +7078,8 @@ void BCMFASTPATH wlc_recv(struct wlc_info *wlc, struct sk_buff *p)
 	if (ieee80211_is_probe_req(h->frame_control))
 		goto toss;
 
-	if (is_amsdu) {
-		WL_ERROR("%s: is_amsdu causing toss\n", __func__);
+	if (is_amsdu)
 		goto toss;
-	}
 
 	wlc_recvctl(wlc, rxh, p);
 	return;
@@ -8295,7 +8292,7 @@ wlc_txflowcontrol_prio_isset(struct wlc_info *wlc, struct wlc_txq_info *q,
 	return (q->stopped & prio_mask) == prio_mask;
 }
 
-/* propogate the flow control to all interfaces using the given tx queue */
+/* propagate the flow control to all interfaces using the given tx queue */
 void wlc_txflowcontrol(struct wlc_info *wlc, struct wlc_txq_info *qi,
 		       bool on, int prio)
 {
@@ -8462,7 +8459,7 @@ static void wlc_txq_free(struct wlc_info *wlc, struct wlc_txq_info *qi)
 }
 
 /*
- * Flag 'scan in progress' to withold dynamic phy calibration
+ * Flag 'scan in progress' to withhold dynamic phy calibration
  */
 void wlc_scan_start(struct wlc_info *wlc)
 {
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_rate.c b/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
index 0cfa36023cf..d284f1ac49c 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
@@ -332,7 +332,7 @@ wlc_rate_hwrs_filter_sort_validate(wlc_rateset_t *rs,
 		return false;
 }
 
-/* caluclate the rate of a rx'd frame and return it as a ratespec */
+/* calculate the rate of a rx'd frame and return it as a ratespec */
 ratespec_t BCMFASTPATH wlc_compute_rspec(d11rxhdr_t *rxh, u8 *plcp)
 {
 	int phy_type;
diff --git a/drivers/staging/brcm80211/include/bcmsrom_fmt.h b/drivers/staging/brcm80211/include/bcmsrom_fmt.h
index ae2bff82860..4768968f910 100644
--- a/drivers/staging/brcm80211/include/bcmsrom_fmt.h
+++ b/drivers/staging/brcm80211/include/bcmsrom_fmt.h
@@ -103,7 +103,7 @@
 
 #define	SROM_CRCREV		63
 
-/* SROM Rev 4: Reallocate the software part of the srom to accomodate
+/* SROM Rev 4: Reallocate the software part of the srom to accommodate
  * MIMO features. It assumes up to two PCIE functions and 440 bytes
  * of useable srom i.e. the useable storage in chips with OTP that
  * implements hardware redundancy.
diff --git a/drivers/staging/brcm80211/include/hndsoc.h b/drivers/staging/brcm80211/include/hndsoc.h
index 9747cc46ca9..6435686b329 100644
--- a/drivers/staging/brcm80211/include/hndsoc.h
+++ b/drivers/staging/brcm80211/include/hndsoc.h
@@ -181,7 +181,7 @@
  * conventions for the use the flash space:
  */
 
-/* Minumum amount of flash we support */
+/* Minimum amount of flash we support */
 #define FLASH_MIN		0x00020000	/* Minimum flash size */
 
 /* A boot/binary may have an embedded block that describes its size  */
diff --git a/drivers/staging/brcm80211/util/bcmotp.c b/drivers/staging/brcm80211/util/bcmotp.c
index ba71c108b36..17991212a22 100644
--- a/drivers/staging/brcm80211/util/bcmotp.c
+++ b/drivers/staging/brcm80211/util/bcmotp.c
@@ -213,7 +213,7 @@ static u16 ipxotp_read_bit(void *oh, chipcregs_t *cc, uint off)
 	return (int)st;
 }
 
-/* Calculate max HW/SW region byte size by substracting fuse region and checksum size,
+/* Calculate max HW/SW region byte size by subtracting fuse region and checksum size,
  * osizew is oi->wsize (OTP size - GU size) in words
  */
 static int ipxotp_max_rgnsz(si_t *sih, int osizew)
@@ -229,7 +229,7 @@ static int ipxotp_max_rgnsz(si_t *sih, int osizew)
 		ret = osizew * 2 - OTP_SZ_FU_72 - OTP_SZ_CHECKSUM;
 		break;
 	default:
-		ASSERT(0);	/* Don't konw about this chip */
+		ASSERT(0);	/* Don't know about this chip */
 	}
 
 	return ret;
diff --git a/drivers/staging/brcm80211/util/bcmsrom.c b/drivers/staging/brcm80211/util/bcmsrom.c
index eca35b94e96..850bfa6593e 100644
--- a/drivers/staging/brcm80211/util/bcmsrom.c
+++ b/drivers/staging/brcm80211/util/bcmsrom.c
@@ -1859,7 +1859,7 @@ static int initvars_srom_pci(si_t *sih, void *curmap, char **vars, uint *count)
 
 	/*
 	 * Apply CRC over SROM content regardless SROM is present or not,
-	 * and use variable <devpath>sromrev's existance in flash to decide
+	 * and use variable <devpath>sromrev's existence in flash to decide
 	 * if we should return an error when CRC fails or read SROM variables
 	 * from flash.
 	 */
diff --git a/drivers/staging/brcm80211/util/hnddma.c b/drivers/staging/brcm80211/util/hnddma.c
index 8a81eb997f9..be339feae77 100644
--- a/drivers/staging/brcm80211/util/hnddma.c
+++ b/drivers/staging/brcm80211/util/hnddma.c
@@ -1179,7 +1179,7 @@ static void BCMFASTPATH dma64_txreclaim(dma_info_t *di, txd_range_t range)
 		   (range == HNDDMA_RANGE_ALL) ? "all" :
 		   ((range ==
 		     HNDDMA_RANGE_TRANSMITTED) ? "transmitted" :
-		    "transfered")));
+		    "transferred")));
 
 	if (di->txin == di->txout)
 		return;
@@ -1549,7 +1549,7 @@ static int BCMFASTPATH dma64_txfast(dma_info_t *di, struct sk_buff *p0,
  * If range is HNDDMA_RANGE_TRANSMITTED, reclaim descriptors that have be
  * transmitted as noted by the hardware "CurrDescr" pointer.
  * If range is HNDDMA_RANGE_TRANSFERED, reclaim descriptors that have be
- * transfered by the DMA as noted by the hardware "ActiveDescr" pointer.
+ * transferred by the DMA as noted by the hardware "ActiveDescr" pointer.
  * If range is HNDDMA_RANGE_ALL, reclaim all txd(s) posted to the ring and
  * return associated packet regardless of the value of hardware pointers.
  */
@@ -1563,7 +1563,7 @@ static void *BCMFASTPATH dma64_getnexttxp(dma_info_t *di, txd_range_t range)
 		   (range == HNDDMA_RANGE_ALL) ? "all" :
 		   ((range ==
 		     HNDDMA_RANGE_TRANSMITTED) ? "transmitted" :
-		    "transfered")));
+		    "transferred")));
 
 	if (di->ntxd == 0)
 		return NULL;
diff --git a/drivers/staging/brcm80211/util/sbpcmcia.h b/drivers/staging/brcm80211/util/sbpcmcia.h
index 6b9923f551a..d4c156586e8 100644
--- a/drivers/staging/brcm80211/util/sbpcmcia.h
+++ b/drivers/staging/brcm80211/util/sbpcmcia.h
@@ -109,7 +109,7 @@
 #define	CISTPL_CFTABLE		0x1b	/* Config table entry */
 #define	CISTPL_END		0xff	/* End of the CIS tuple chain */
 
-/* Function identifier provides context for the function extentions tuple */
+/* Function identifier provides context for the function extensions tuple */
 #define CISTPL_FID_SDIO		0x0c	/* Extensions defined by SDIO spec */
 
 /* Function extensions for LANs (assumed for extensions other than SDIO) */
diff --git a/drivers/staging/brcm80211/util/siutils.c b/drivers/staging/brcm80211/util/siutils.c
index ed168ceba5f..6ebd7f58af8 100644
--- a/drivers/staging/brcm80211/util/siutils.c
+++ b/drivers/staging/brcm80211/util/siutils.c
@@ -1319,7 +1319,7 @@ int si_clkctl_xtal(si_t *sih, uint what, bool on)
 }
 
 /*
- *  clock control policy function throught chipcommon
+ *  clock control policy function through chipcommon
  *
  *    set dynamic clk control mode (forceslow, forcefast, dynamic)
  *    returns true if we are forcing fast clock
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index a4ceb29c358..e7e72b8d8cd 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -2064,7 +2064,7 @@ void comedi_event(struct comedi_device *dev, struct comedi_subdevice *s)
 			     COMEDI_CB_OVERFLOW)) {
 		runflags_mask |= SRF_RUNNING;
 	}
-	/* remember if an error event has occured, so an error
+	/* remember if an error event has occurred, so an error
 	 * can be returned the next time the user does a read() */
 	if (s->async->events & (COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW)) {
 		runflags_mask |= SRF_ERROR;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
index 644bda44556..482a412aa65 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
@@ -124,9 +124,9 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 |                     -5: The selected PCI input clock is wrong              |
 |                     -6: Timing unity selection is wrong                    |
 |                     -7: Base timing selection is wrong                     |
-|                     -8: You can not used the 40MHz clock selection wich    |
+|                     -8: You can not used the 40MHz clock selection with    |
 |                         this board                                         |
-|                     -9: You can not used the 40MHz clock selection wich    |
+|                     -9: You can not used the 40MHz clock selection with    |
 |                         this CHRONOS version                               |
 +----------------------------------------------------------------------------+
 */
@@ -721,10 +721,10 @@ int i_APCI1710_InsnConfigInitChrono(struct comedi_device *dev, struct comedi_sub
 								}
 							} else {
 			     /**************************************************************/
-								/* You can not used the 40MHz clock selection wich this board */
+								/* You can not use the 40MHz clock selection with this board */
 			     /**************************************************************/
 
-								DPRINTK("You can not used the 40MHz clock selection wich this board\n");
+								DPRINTK("You can not used the 40MHz clock selection with this board\n");
 								i_ReturnValue =
 									-8;
 							}
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
index 90e71e12784..b973095146f 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
@@ -59,7 +59,7 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 /*+----------------------------------------------------------------------------+*/
 /*| Input Parameters  : int    i_NbOfWordsToRead : Nbr. of word to read        |*/
 /*|                     unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
-/*|                     unsigned short   w_EepromStartAddress : Eeprom strat address     |*/
+/*|                     unsigned short   w_EepromStartAddress : Eeprom start address     |*/
 /*+----------------------------------------------------------------------------+*/
 /*| Output Parameters : unsigned short * pw_DataRead : Read data                          |*/
 /*+----------------------------------------------------------------------------+*/
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
index 9dd857df93c..002297dfe33 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
@@ -498,7 +498,7 @@ void v_APCI2032_Interrupt(int irq, void *d)
 	struct comedi_device *dev = d;
 	unsigned int ui_DO;
 
-	ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1;	/* Check if VCC OR CC interrupt has occured. */
+	ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1;	/* Check if VCC OR CC interrupt has occurred. */
 
 	if (ui_DO == 0) {
 		printk("\nInterrupt from unKnown source\n");
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index a813fdbbd96..fc61214151b 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -148,7 +148,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
 	unsigned short us_ConvertTiming, us_TmpValue, i;
 	unsigned char b_Tmp;
 
-	/*  fix convertion time to 10 us */
+	/*  fix conversion time to 10 us */
 	if (!devpriv->ui_EocEosConversionTime) {
 		printk("No timer0 Value using 10 us\n");
 		us_ConvertTiming = 10;
@@ -251,7 +251,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
 				APCI3120_SELECT_TIMER_0_WORD;
 			outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0);
 
-			/* Set the convertion time */
+			/* Set the conversion time */
 			outw(us_ConvertTiming,
 				devpriv->iobase + APCI3120_TIMER_VALUE);
 
@@ -311,7 +311,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
 				APCI3120_SELECT_TIMER_0_WORD;
 			outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0);
 
-			/* Set the convertion time */
+			/* Set the conversion time */
 			outw(us_ConvertTiming,
 				devpriv->iobase + APCI3120_TIMER_VALUE);
 
@@ -354,9 +354,9 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
 			/* Start conversion */
 			outw(0, devpriv->iobase + APCI3120_START_CONVERSION);
 
-			/* Waiting of end of convertion if interrupt is not installed */
+			/* Waiting of end of conversion if interrupt is not installed */
 			if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) {
-				/* Waiting the end of convertion */
+				/* Waiting the end of conversion */
 				do {
 					us_TmpValue =
 						inw(devpriv->iobase +
@@ -854,7 +854,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_0_WORD;
 		outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
-		/* Set the convertion time */
+		/* Set the conversion time */
 		outw(((unsigned short) ui_TimerValue0),
 			dev->iobase + APCI3120_TIMER_VALUE);
 		break;
@@ -872,7 +872,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
 				b_DigitalOutputRegister) & 0xF0) |
 			APCI3120_SELECT_TIMER_1_WORD;
 		outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
-		/* Set the convertion time */
+		/* Set the conversion time */
 		outw(((unsigned short) ui_TimerValue1),
 			dev->iobase + APCI3120_TIMER_VALUE);
 
@@ -889,7 +889,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
 			APCI3120_SELECT_TIMER_0_WORD;
 		outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
 
-		/* Set the convertion time */
+		/* Set the conversion time */
 		outw(((unsigned short) ui_TimerValue0),
 			dev->iobase + APCI3120_TIMER_VALUE);
 		break;
@@ -1104,7 +1104,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
 
 /*
  * 4
- * amount of bytes to be transfered set transfer count used ADDON
+ * amount of bytes to be transferred set transfer count used ADDON
  * MWTC register commented testing
  * outl(devpriv->ui_DmaBufferUsesize[0],
  * devpriv->i_IobaseAddon+AMCC_OP_REG_AMWTC);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
index b3c81979f14..50eb0a0a0a0 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
@@ -169,7 +169,7 @@ struct str_AnalogReadInformation {
 
 	unsigned char b_Type;		/* EOC or EOS */
 	unsigned char b_InterruptFlag;	/* Interrupt use or not                    */
-	unsigned int ui_ConvertTiming;	/* Selection of the convertion time        */
+	unsigned int ui_ConvertTiming;	/* Selection of the conversion time        */
 	unsigned char b_NbrOfChannel;	/* Number of channel to read               */
 	unsigned int ui_ChannelList[MAX_ANALOGINPUT_CHANNELS];	/* Number of the channel to be read        */
 	unsigned int ui_RangeList[MAX_ANALOGINPUT_CHANNELS];	/* Gain of each channel                    */
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index a93e2349ad3..c75a1a1fd77 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -103,7 +103,7 @@ struct str_BoardInfos s_BoardInfos[100];	/*  100 will be the max number of board
 /*+----------------------------------------------------------------------------+*/
 /*| Input Parameters  : int    i_NbOfWordsToRead : Nbr. of word to read        |*/
 /*|                     unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
-/*|                     unsigned short   w_EepromStartAddress : Eeprom strat address     |*/
+/*|                     unsigned short   w_EepromStartAddress : Eeprom start address     |*/
 /*+----------------------------------------------------------------------------+*/
 /*| Output Parameters : unsigned short * pw_DataRead : Read data                          |*/
 /*+----------------------------------------------------------------------------+*/
@@ -849,7 +849,7 @@ int i_APCI3200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdev
   |                                             0:Single Read
   |                                             1:Read more channel
   2:Single scan
-  |                                             3:Continous Scan
+  |                                             3:Continuous Scan
   data[13]          :Number of channels to read
   |                          data[14]          :RTD connection type
   :0:RTD not used
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 766103c882a..632d5d0721c 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -23,7 +23,7 @@ For AI:
 - If cmd->scan_begin_src=TRIG_EXT then trigger input is TGIN (pin 46).
 - If cmd->convert_src=TRIG_EXT then trigger input is EXTTRG (pin 44).
 - If cmd->start_src/stop_src=TRIG_EXT then trigger input is TGIN (pin 46).
-- It is not neccessary to have cmd.scan_end_arg=cmd.chanlist_len but
+- It is not necessary to have cmd.scan_end_arg=cmd.chanlist_len but
   cmd.scan_end_arg modulo cmd.chanlist_len must by 0.
 - If return value of cmdtest is 5 then you've bad channel list
   (it isn't possible mixture S.E. and DIFF inputs or bipolar and unipolar
@@ -823,7 +823,7 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
 		move_block_from_dma(dev, s,
 				    devpriv->dmabuf_virt[devpriv->dma_actbuf],
 				    samplesinbuf);
-		m = m - sampls;		/* m= how many samples was transfered */
+		m = m - sampls;		/* m= how many samples was transferred */
 	}
 /* DPRINTK("YYY\n"); */
 
@@ -1297,7 +1297,7 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
 	DPRINTK("3 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);
 	/* transfer without TRIG_WAKE_EOS */
 	if (!(devpriv->ai_flags & TRIG_WAKE_EOS)) {
-		/* if it's possible then allign DMA buffers to length of scan */
+		/* if it's possible then align DMA buffers to length of scan */
 		i = dmalen0;
 		dmalen0 =
 		    (dmalen0 / (devpriv->ai_n_realscanlen << 1)) *
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index 4b470000b69..5361f318b01 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -65,7 +65,7 @@ If you do not specify any options, they will default to
    written by jeremy theler <thelerg@ib.cnea.gov.ar>
 
    instituto balseiro
-   comision nacional de energia atomica
+   commission nacional de energia atomica
    universidad nacional de cuyo
    argentina
 
@@ -342,7 +342,7 @@ static int adq12b_ai_rinsn(struct comedi_device *dev,
 	/* convert n samples */
 	for (n = 0; n < insn->n; n++) {
 
-		/* wait for end of convertion */
+		/* wait for end of conversion */
 		i = 0;
 		do {
 			/* udelay(1); */
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 466e69f94ef..da2b75b15d4 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -98,7 +98,7 @@ Configuration options:
 #define	Status_FE	0x0100	/* 1=FIFO is empty */
 #define Status_FH	0x0200	/* 1=FIFO is half full */
 #define Status_FF	0x0400	/* 1=FIFO is full, fatal error */
-#define Status_IRQ	0x0800	/* 1=IRQ occured */
+#define Status_IRQ	0x0800	/* 1=IRQ occurred */
 /* bits from control register (PCI171x_CONTROL) */
 #define Control_CNT0	0x0040	/* 1=CNT0 have external source,
 				 * 0=have internal 100kHz source */
@@ -1161,7 +1161,7 @@ static int check_channel_list(struct comedi_device *dev,
 	}
 
 	if (n_chan > 1) {
-		chansegment[0] = chanlist[0];	/*  first channel is everytime ok */
+		chansegment[0] = chanlist[0];	/*  first channel is every time ok */
 		for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {	/*  build part of chanlist */
 			/*  printk("%d. %d %d\n",i,CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
 			if (chanlist[0] == chanlist[i])
@@ -1176,9 +1176,9 @@ static int check_channel_list(struct comedi_device *dev,
 			    (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
 			if (CR_AREF(chansegment[i - 1]) == AREF_DIFF)
 				nowmustbechan = (nowmustbechan + 1) % s->n_chan;
-			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continous :-( */
+			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continuous :-( */
 				printk
-				    ("channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
+				    ("channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
 				     i, CR_CHAN(chanlist[i]), nowmustbechan,
 				     CR_CHAN(chanlist[0]));
 				return 0;
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 0941643b386..61968a505f2 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -115,7 +115,7 @@ analog triggering on 1602 series
 #define   INT_MASK 0x3		/*  mask of interrupt select bits */
 #define   INTE 0x4		/*  interrupt enable */
 #define   DAHFIE 0x8		/*  dac half full interrupt enable */
-#define   EOAIE	0x10		/*  end of aquisition interrupt enable */
+#define   EOAIE	0x10		/*  end of acquisition interrupt enable */
 #define   DAHFI	0x20		/*  dac half full read status / write interrupt clear */
 #define   EOAI 0x40		/*  read end of acq. interrupt status / write clear */
 #define   INT 0x80		/*  read interrupt status / write clear */
@@ -440,7 +440,7 @@ struct cb_pcidas_private {
 	unsigned int divisor1;
 	unsigned int divisor2;
 	volatile unsigned int count;	/*  number of analog input samples remaining */
-	volatile unsigned int adc_fifo_bits;	/*  bits to write to interupt/adcfifo register */
+	volatile unsigned int adc_fifo_bits;	/*  bits to write to interrupt/adcfifo register */
 	volatile unsigned int s5933_intcsr_bits;	/*  bits to write to amcc s5933 interrupt control/status register */
 	volatile unsigned int ao_control_bits;	/*  bits to write to ao control and status register */
 	short ai_buffer[AI_BUFFER_SIZE];
@@ -1653,7 +1653,7 @@ static irqreturn_t cb_pcidas_interrupt(int irq, void *d)
 		spin_unlock_irqrestore(&dev->spinlock, flags);
 	} else if (status & EOAI) {
 		comedi_error(dev,
-			     "bug! encountered end of aquisition interrupt?");
+			     "bug! encountered end of acquisition interrupt?");
 		/*  clear EOA interrupt latch */
 		spin_lock_irqsave(&dev->spinlock, flags);
 		outw(devpriv->adc_fifo_bits | EOAI,
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 2583e16cd02..1e324198996 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -104,7 +104,7 @@ TODO:
 #endif
 
 #define TIMER_BASE 25		/*  40MHz master clock */
-#define PRESCALED_TIMER_BASE	10000	/*  100kHz 'prescaled' clock for slow aquisition, maybe I'll support this someday */
+#define PRESCALED_TIMER_BASE	10000	/*  100kHz 'prescaled' clock for slow acquisition, maybe I'll support this someday */
 #define DMA_BUFFER_SIZE 0x1000
 
 #define PCI_VENDOR_ID_COMPUTERBOARDS	0x1307
@@ -136,7 +136,7 @@ enum write_only_registers {
 	ADC_DELAY_INTERVAL_UPPER_REG = 0x1c,	/*  upper 8 bits of delay interval counter */
 	ADC_COUNT_LOWER_REG = 0x1e,	/*  lower 16 bits of hardware conversion/scan counter */
 	ADC_COUNT_UPPER_REG = 0x20,	/*  upper 8 bits of hardware conversion/scan counter */
-	ADC_START_REG = 0x22,	/*  software trigger to start aquisition */
+	ADC_START_REG = 0x22,	/*  software trigger to start acquisition */
 	ADC_CONVERT_REG = 0x24,	/*  initiates single conversion */
 	ADC_QUEUE_CLEAR_REG = 0x26,	/*  clears adc queue */
 	ADC_QUEUE_LOAD_REG = 0x28,	/*  loads adc queue */
@@ -199,7 +199,7 @@ enum intr_enable_contents {
 	ADC_INTR_EOSCAN_BITS = 0x2,	/*  interrupt end of scan */
 	ADC_INTR_EOSEQ_BITS = 0x3,	/*  interrupt end of sequence (probably wont use this it's pretty fancy) */
 	EN_ADC_INTR_SRC_BIT = 0x4,	/*  enable adc interrupt source */
-	EN_ADC_DONE_INTR_BIT = 0x8,	/*  enable adc aquisition done interrupt */
+	EN_ADC_DONE_INTR_BIT = 0x8,	/*  enable adc acquisition done interrupt */
 	DAC_INTR_SRC_MASK = 0x30,
 	DAC_INTR_QEMPTY_BITS = 0x0,
 	DAC_INTR_HIGH_CHAN_BITS = 0x10,
@@ -2867,7 +2867,7 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
 	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	/*  start aquisition */
+	/*  start acquisition */
 	if (cmd->start_src == TRIG_NOW) {
 		writew(0, priv(dev)->main_iobase + ADC_START_REG);
 		DEBUG_PRINT("soft trig\n");
@@ -2942,7 +2942,7 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev)
 /* Read from 32 bit wide ai fifo of 4020 - deal with insane grey coding of pointers.
  * The pci-4020 hardware only supports
  * dma transfers (it only supports the use of pio for draining the last remaining
- * points from the fifo when a data aquisition operation has completed).
+ * points from the fifo when a data acquisition operation has completed).
  */
 static void pio_drain_ai_fifo_32(struct comedi_device *dev)
 {
@@ -3046,7 +3046,7 @@ static void handle_ai_interrupt(struct comedi_device *dev,
 		comedi_error(dev, "fifo overrun");
 		async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
 	}
-	/*  spin lock makes sure noone else changes plx dma control reg */
+	/*  spin lock makes sure no one else changes plx dma control reg */
 	spin_lock_irqsave(&dev->spinlock, flags);
 	dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
 	if (plx_status & ICS_DMA1_A) {	/*  dma chan 1 interrupt */
@@ -3170,7 +3170,7 @@ static void handle_ao_interrupt(struct comedi_device *dev,
 	async = s->async;
 	cmd = &async->cmd;
 
-	/*  spin lock makes sure noone else changes plx dma control reg */
+	/*  spin lock makes sure no one else changes plx dma control reg */
 	spin_lock_irqsave(&dev->spinlock, flags);
 	dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
 	if (plx_status & ICS_DMA0_A) {	/*  dma chan 0 interrupt */
diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c
index b220b305541..a804742b802 100644
--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -81,7 +81,7 @@ static const struct waveform_board waveform_boards[] = {
 /* Data unique to this driver */
 struct waveform_private {
 	struct timer_list timer;
-	struct timeval last;	/* time at which last timer interrupt occured */
+	struct timeval last;	/* time at which last timer interrupt occurred */
 	unsigned int uvolt_amplitude;	/* waveform amplitude in microvolts */
 	unsigned long usec_period;	/* waveform period in microseconds */
 	unsigned long usec_current;	/* current time (modulo waveform period) */
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index 6ea93f9c0b4..60c2b12d6ff 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -1087,7 +1087,7 @@ static void das1800_flush_dma_channel(struct comedi_device *dev,
 	return;
 }
 
-/* flushes remaining data from board when external trigger has stopped aquisition
+/* flushes remaining data from board when external trigger has stopped acquisition
  * and we are using dma transfers */
 static void das1800_flush_dma(struct comedi_device *dev,
 			      struct comedi_subdevice *s)
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index aecaedc5027..96d41ad7695 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -391,7 +391,7 @@ static irqreturn_t das800_interrupt(int irq, void *d)
 	spin_lock_irqsave(&dev->spinlock, irq_flags);
 	outb(CONTROL1, dev->iobase + DAS800_GAIN);	/* select base address + 7 to be STATUS2 register */
 	status = inb(dev->iobase + DAS800_STATUS2) & STATUS2_HCEN;
-	/* don't release spinlock yet since we want to make sure noone else disables hardware conversions */
+	/* don't release spinlock yet since we want to make sure no one else disables hardware conversions */
 	if (status == 0) {
 		spin_unlock_irqrestore(&dev->spinlock, irq_flags);
 		return IRQ_HANDLED;
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 693728e14bd..2b4e6e6eb82 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -532,7 +532,7 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev,
 		msb = dmm_inb(dev, DMM32AT_AIMSB);
 
 		/* invert sign bit to make range unsigned, this is an
-		   idiosyncracy of the diamond board, it return
+		   idiosyncrasy of the diamond board, it return
 		   conversions as a signed value, i.e. -32768 to
 		   32767, flipping the bit and interpreting it as
 		   signed gives you a range of 0 to 65535 which is
diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index a1664caa1d9..0131d5225b5 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -560,7 +560,7 @@ int dt2811_adtrig(kdev_t minor, comedi_adtrig *adtrig)
 	switch (dev->i_admode) {
 	case COMEDI_MDEMAND:
 		dev->ntrig = adtrig->n - 1;
-		/* not neccessary */
+		/* not necessary */
 		/*printk("dt2811: AD soft trigger\n"); */
 		/*outb(DT2811_CLRERROR|DT2811_INTENB,
 			dev->iobase+DT2811_ADCSR); */
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 06059850dae..32d9c42e965 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -773,7 +773,7 @@ static int dt9812_probe(struct usb_interface *interface,
 			retval = dt9812_read_info(dev, 1, &fw, sizeof(fw));
 			if (retval == 0) {
 				dev_info(&interface->dev,
-					 "usb_reset_configuration succeded "
+					 "usb_reset_configuration succeeded "
 					 "after %d iterations\n", i);
 				break;
 			}
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index 1661b57ca2a..bc020dea141 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -1031,7 +1031,7 @@ static irqreturn_t handle_interrupt(int irq, void *d)
 		writel(hpdi_intr_status,
 		       priv(dev)->hpdi_iobase + INTERRUPT_STATUS_REG);
 	}
-	/*  spin lock makes sure noone else changes plx dma control reg */
+	/*  spin lock makes sure no one else changes plx dma control reg */
 	spin_lock_irqsave(&dev->spinlock, flags);
 	dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
 	if (plx_status & ICS_DMA0_A) {	/*  dma chan 0 interrupt */
@@ -1045,7 +1045,7 @@ static irqreturn_t handle_interrupt(int irq, void *d)
 	}
 	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	/*  spin lock makes sure noone else changes plx dma control reg */
+	/*  spin lock makes sure no one else changes plx dma control reg */
 	spin_lock_irqsave(&dev->spinlock, flags);
 	dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
 	if (plx_status & ICS_DMA1_A) {	/*  XXX *//*  dma chan 1 interrupt */
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 0bab39b3409..126550f3c02 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -715,7 +715,7 @@ Description:
 	is built correctly
 
 Parameters:
-	struct comedi_device *dev	Pointer to current sevice structure
+	struct comedi_device *dev	Pointer to current service structure
 	struct comedi_subdevice *s	Pointer to current subdevice structure
 	unsigned int *chanlist	Pointer to packed channel list
 	unsigned int n_chan	Number of channels to scan
@@ -772,7 +772,7 @@ Description:
 	Status register.
 
 Parameters:
-	struct comedi_device *dev	Pointer to current sevice structure
+	struct comedi_device *dev	Pointer to current service structure
 	struct comedi_subdevice *s	Pointer to current subdevice structure
 	unsigned int *chanlist	Pointer to packed channel list
 	unsigned int n_chan	Number of channels to scan
@@ -848,7 +848,7 @@ Description:
 	This function resets the icp multi device to a 'safe' state
 
 Parameters:
-	struct comedi_device *dev	Pointer to current sevice structure
+	struct comedi_device *dev	Pointer to current service structure
 
 Returns:int	0 = success
 
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 75511bae019..b692fea0d2b 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -1810,7 +1810,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 		       ai_context->irq_status_reg) &
 	    ME4000_IRQ_STATUS_BIT_AI_HF) {
 		ISR_PDEBUG
-		    ("me4000_ai_isr(): Fifo half full interrupt occured\n");
+		    ("me4000_ai_isr(): Fifo half full interrupt occurred\n");
 
 		/* Read status register to find out what happened */
 		tmp = me4000_inl(dev, ai_context->ctrl_reg);
@@ -1903,7 +1903,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 	if (me4000_inl(dev,
 		       ai_context->irq_status_reg) & ME4000_IRQ_STATUS_BIT_SC) {
 		ISR_PDEBUG
-		    ("me4000_ai_isr(): Sample counter interrupt occured\n");
+		    ("me4000_ai_isr(): Sample counter interrupt occurred\n");
 
 		s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOA;
 
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index a89eebd23f6..dd09a6d46e5 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -39,8 +39,8 @@ Status: working
 
 Configuration Options:
   [0] - I/O base address
-  [1] - convertion rate
-	Convertion rate  RMS noise  Effective Number Of Bits
+  [1] - conversion rate
+	Conversion rate  RMS noise  Effective Number Of Bits
 	0      3.52kHz        23uV                17
 	1      1.76kHz       3.5uV                20
 	2       880Hz         2uV                21.3
@@ -93,8 +93,8 @@ Configuration Options:
 #define MPC624_DMY_BIT          (1<<30)
 #define MPC624_SGN_BIT          (1<<29)
 
-/* Convertion speeds */
-/* OSR4 OSR3 OSR2 OSR1 OSR0  Convertion rate  RMS noise  ENOB^
+/* Conversion speeds */
+/* OSR4 OSR3 OSR2 OSR1 OSR0  Conversion rate  RMS noise  ENOB^
  *  X    0    0    0    1        3.52kHz        23uV      17
  *  X    0    0    1    0        1.76kHz       3.5uV      20
  *  X    0    0    1    1         880Hz         2uV      21.3
@@ -227,7 +227,7 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		break;
 	default:
 		printk
-		    (KERN_ERR "illegal convertion rate setting!"
+		    (KERN_ERR "illegal conversion rate setting!"
 			" Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
 		devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
 	}
@@ -296,7 +296,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
 	}
 
 	for (n = 0; n < insn->n; n++) {
-		/*  Trigger the convertion */
+		/*  Trigger the conversion */
 		outb(MPC624_ADSCK, dev->iobase + MPC624_ADC);
 		udelay(1);
 		outb(MPC624_ADCS | MPC624_ADSCK, dev->iobase + MPC624_ADC);
@@ -304,7 +304,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
 		outb(0, dev->iobase + MPC624_ADC);
 		udelay(1);
 
-		/*  Wait for the convertion to end */
+		/*  Wait for the conversion to end */
 		for (i = 0; i < TIMEOUT; i++) {
 			ucPort = inb(dev->iobase + MPC624_ADC);
 			if (ucPort & MPC624_ADBUSY)
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 4d0053ea246..c192b71ec04 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -104,10 +104,10 @@ TRIG_WAKE_EOS
 #define STATUS_REG		0x12	/*  read only */
 #define   FNE_BIT		0x1	/*  fifo not empty */
 #define   OVFL_BIT		0x8	/*  fifo overflow */
-#define   EDAQ_BIT		0x10	/*  end of aquisition interrupt */
+#define   EDAQ_BIT		0x10	/*  end of acquisition interrupt */
 #define   DCAL_BIT		0x20	/*  offset calibration in progress */
-#define   INTR_BIT		0x40	/*  interrupt has occured */
-#define   DMA_TC_BIT		0x80	/*  dma terminal count interrupt has occured */
+#define   INTR_BIT		0x40	/*  interrupt has occurred */
+#define   DMA_TC_BIT		0x80	/*  dma terminal count interrupt has occurred */
 #define   ID_BITS(x)	(((x) >> 8) & 0x3)
 #define IRQ_DMA_CNTRL_REG		0x12	/*  write only */
 #define   DMA_CHAN_BITS(x)		((x) & 0x7)	/*  sets dma channel */
@@ -434,7 +434,7 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	s->cancel = a2150_cancel;
 
 	/* need to do this for software counting of completed conversions, to
-	 * prevent hardware count from stopping aquisition */
+	 * prevent hardware count from stopping acquisition */
 	outw(HW_COUNT_DISABLE, dev->iobase + I8253_MODE_REG);
 
 	/*  set card's irq and dma levels */
@@ -729,7 +729,7 @@ static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	/*  send trigger config bits */
 	outw(trigger_bits, dev->iobase + TRIGGER_REG);
 
-	/*  start aquisition for soft trigger */
+	/*  start acquisition for soft trigger */
 	if (cmd->start_src == TRIG_NOW) {
 		outw(0, dev->iobase + FIFO_START_REG);
 	}
@@ -768,7 +768,7 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	/*  setup start triggering */
 	outw(0, dev->iobase + TRIGGER_REG);
 
-	/*  start aquisition for soft trigger */
+	/*  start acquisition for soft trigger */
 	outw(0, dev->iobase + FIFO_START_REG);
 
 	/* there is a 35.6 sample delay for data to get through the antialias filter */
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 241fe525abf..ab8f37022a3 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -183,11 +183,11 @@ NI manuals:
 #define   OVERRUN_BIT	0x2
 /* fifo overflow */
 #define   OVERFLOW_BIT	0x4
-/* timer interrupt has occured */
+/* timer interrupt has occurred */
 #define   TIMER_BIT	0x8
-/* dma terminal count has occured */
+/* dma terminal count has occurred */
 #define   DMATC_BIT	0x10
-/* external trigger has occured */
+/* external trigger has occurred */
 #define   EXT_TRIG_BIT	0x40
 /* 1200 boards only */
 #define STATUS2_REG	0x1d
@@ -1149,7 +1149,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	range = CR_RANGE(cmd->chanlist[0]);
 	aref = CR_AREF(cmd->chanlist[0]);
 
-	/* make sure board is disabled before setting up aquisition */
+	/* make sure board is disabled before setting up acquisition */
 	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
 	devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
@@ -1349,7 +1349,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
 	devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
 
-	/*  startup aquisition */
+	/*  startup acquisition */
 
 	/*  command2 reg */
 	/*  use 2 cascaded counters for pacing */
@@ -1571,8 +1571,8 @@ static void handle_isa_dma(struct comedi_device *dev)
 	devpriv->write_byte(0x1, dev->iobase + DMATC_CLEAR_REG);
 }
 
-/* makes sure all data acquired by board is transfered to comedi (used
- * when aquisition is terminated by stop_src == TRIG_EXT). */
+/* makes sure all data acquired by board is transferred to comedi (used
+ * when acquisition is terminated by stop_src == TRIG_EXT). */
 static void labpc_drain_dregs(struct comedi_device *dev)
 {
 	if (devpriv->current_transfer == isa_dma_transfer)
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 005d2fe86ee..8dd3a01d48d 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -821,7 +821,7 @@ static int ni_pcidio_cmdtest(struct comedi_device *dev,
 			cmd->scan_begin_arg = MAX_SPEED;
 			err++;
 		}
-		/* no minumum speed */
+		/* no minimum speed */
 	} else {
 		/* TRIG_EXT */
 		/* should be level/edge, hi/lo specification here */
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index c6dce4a1425..09ff4723b22 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -34,7 +34,7 @@
  *	       and I cann't test all features.)
  *
  * This driver supports insn and cmd interfaces. Some boards support only insn
- * becouse their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
+ * because their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
  * Data transfer over DMA is supported only when you measure only one
  * channel, this is too hardware limitation of these boards.
  *
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index ef3cc4f3be6..8f3fc6ee088 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -954,7 +954,7 @@ check_channel_list(struct comedi_device *dev,
 	}
 
 	if (chanlen > 1) {
-		/*  first channel is everytime ok */
+		/*  first channel is every time ok */
 		chansegment[0] = chanlist[0];
 		for (i = 1, seglen = 1; i < chanlen; i++, seglen++) {
 			/*  build part of chanlist */
@@ -968,10 +968,10 @@ check_channel_list(struct comedi_device *dev,
 			nowmustbechan =
 			    (CR_CHAN(chansegment[i - 1]) + 1) % chanlen;
 			if (nowmustbechan != CR_CHAN(chanlist[i])) {
-				/*  channel list isn't continous :-( */
+				/*  channel list isn't continuous :-( */
 				printk(KERN_WARNING
 				       "comedi%d: pcl816: channel list must "
-				       "be continous! chanlist[%i]=%d but "
+				       "be continuous! chanlist[%i]=%d but "
 				       "must be %d or %d!\n", dev->minor,
 				       i, CR_CHAN(chanlist[i]), nowmustbechan,
 				       CR_CHAN(chanlist[0]));
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index f58d75be729..e3eea09ae1f 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -1231,7 +1231,7 @@ static int check_channel_list(struct comedi_device *dev,
 	}
 
 	if (n_chan > 1) {
-		/*  first channel is everytime ok */
+		/*  first channel is every time ok */
 		chansegment[0] = chanlist[0];
 		/*  build part of chanlist */
 		for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
@@ -1245,9 +1245,9 @@ static int check_channel_list(struct comedi_device *dev,
 				break;
 			nowmustbechan =
 			    (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
-			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continous :-( */
+			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continuous :-( */
 				printk
-				    ("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
+				    ("comedi%d: pcl818: channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
 				     dev->minor, i, CR_CHAN(chanlist[i]),
 				     nowmustbechan, CR_CHAN(chanlist[0]));
 				return 0;
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index 5c832d7ed45..f2e88e57d55 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -733,7 +733,7 @@ static int pcmmio_dio_insn_config(struct comedi_device *dev,
 		break;
 
 	case INSN_CONFIG_DIO_QUERY:
-		/* retreive from shadow register */
+		/* retrieve from shadow register */
 		data[1] =
 		    (s->io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
 		return insn->n;
@@ -1279,7 +1279,7 @@ static int wait_dac_ready(unsigned long iobase)
 	   "no busy waiting" policy. The fact is that the hardware is
 	   normally so fast that we usually only need one time through the loop
 	   anyway. The longer timeout is for rare occasions and for detecting
-	   non-existant hardware.  */
+	   non-existent hardware.  */
 
 	while (retry--) {
 		if (inb(iobase + 3) & 0x80)
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 7a9287433b2..b2c2c8971a3 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -605,7 +605,7 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev,
 		break;
 
 	case INSN_CONFIG_DIO_QUERY:
-		/* retreive from shadow register */
+		/* retrieve from shadow register */
 		data[1] =
 		    (s->io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
 		return insn->n;
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index ebba9bb4777..82942e5728a 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -390,7 +390,7 @@ static int daqp_ai_insn_read(struct comedi_device *dev,
 
 	outb(v, dev->iobase + DAQP_CONTROL);
 
-	/* Reset any pending interrupts (my card has a tendancy to require
+	/* Reset any pending interrupts (my card has a tendency to require
 	 * require multiple reads on the status register to achieve this)
 	 */
 
@@ -752,7 +752,7 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
 	outb(v, dev->iobase + DAQP_CONTROL);
 
-	/* Reset any pending interrupts (my card has a tendancy to require
+	/* Reset any pending interrupts (my card has a tendency to require
 	 * require multiple reads on the status register to achieve this)
 	 */
 	counter = 100;
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 357858d2744..7f09ed755fe 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -75,7 +75,7 @@ Configuration options:
     das1800, since they have the best documented code.  Driver
     cb_pcidas64.c uses the same DMA controller.
 
-    As far as I can tell, the About interrupt doesnt work if Sample is
+    As far as I can tell, the About interrupt doesn't work if Sample is
     also enabled.  It turns out that About really isn't needed, since
     we always count down samples read.
 
@@ -370,7 +370,7 @@ struct rtdPrivate {
 	/* timer gate (when enabled) */
 	u8 utcGate[4];		/* 1 extra allows simple range check */
 
-	/* shadow registers affect other registers, but cant be read back */
+	/* shadow registers affect other registers, but can't be read back */
 	/* The macros below update these on writes */
 	u16 intMask;		/* interrupt mask */
 	u16 intClearMask;	/* interrupt clear mask */
@@ -485,7 +485,7 @@ struct rtdPrivate {
 #define RtdAdcFifoGet(dev) \
 	readw(devpriv->las1+LAS1_ADC_FIFO)
 
-/* Read two ADC data values (DOESNT WORK) */
+/* Read two ADC data values (DOESN'T WORK) */
 #define RtdAdcFifoGet2(dev) \
 	readl(devpriv->las1+LAS1_ADC_FIFO)
 
@@ -857,7 +857,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			DPRINTK("rtd520: PCI latency = %d\n", pci_latency);
 		}
 
-		/* Undocumented EPLD version (doesnt match RTD driver results) */
+		/* Undocumented EPLD version (doesn't match RTD driver results) */
 		/*DPRINTK ("rtd520: Reading epld from %p\n",
 		   devpriv->las0+0);
 		   epld_version = readl (devpriv->las0+0);
@@ -1291,7 +1291,7 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 /*
   "instructions" read/write data in "one-shot" or "software-triggered"
   mode (simplest case).
-  This doesnt use interrupts.
+  This doesn't use interrupts.
 
   Note, we don't do any settling delays.  Use a instruction list to
   select, delay, then read.
@@ -2120,7 +2120,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 }
 
 /*
-  Stop a running data aquisition.
+  Stop a running data acquisition.
 */
 static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index d5ba3ab357a..23fc64b9988 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -139,7 +139,7 @@ struct s626_private {
 	int got_regions;
 	short allocatedBuf;
 	uint8_t ai_cmd_running;	/*  ai_cmd is running */
-	uint8_t ai_continous;	/*  continous aquisition */
+	uint8_t ai_continous;	/*  continous acquisition */
 	int ai_sample_count;	/*  number of samples to acquire */
 	unsigned int ai_sample_timer;
 	/*  time between samples in  units of the timer */
@@ -1048,7 +1048,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 	uint8_t group;
 	uint16_t irqbit;
 
-	DEBUG("s626_irq_handler: interrupt request recieved!!!\n");
+	DEBUG("s626_irq_handler: interrupt request received!!!\n");
 
 	if (dev->attached == 0)
 		return IRQ_NONE;
@@ -1165,14 +1165,14 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 							(16 * group)))
 					    == 1 && cmd->start_src == TRIG_EXT) {
 						DEBUG
-						    ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+						    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
 						     cmd->start_arg);
 
 						/*  Start executing the RPS program. */
 						MC_ENABLE(P_MC1, MC1_ERPS1);
 
 						DEBUG
-						    ("s626_irq_handler: aquisition start triggered!!!\n");
+						    ("s626_irq_handler: acquisition start triggered!!!\n");
 
 						if (cmd->scan_begin_src ==
 						    TRIG_EXT) {
@@ -1194,7 +1194,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 					    && cmd->scan_begin_src ==
 					    TRIG_EXT) {
 						DEBUG
-						    ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+						    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
 						     cmd->scan_begin_arg);
 
 						/*  Trigger ADC scan loop start by setting RPS Signal 0. */
@@ -1236,7 +1236,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 					    == 1
 					    && cmd->convert_src == TRIG_EXT) {
 						DEBUG
-						    ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+						    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
 						     cmd->convert_arg);
 
 						/*  Trigger ADC scan loop start by setting RPS Signal 0. */
@@ -1805,7 +1805,7 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		DEBUG("s626_ai_cmd: NULL command\n");
 		return -EINVAL;
 	} else {
-		DEBUG("s626_ai_cmd: command recieved!!!\n");
+		DEBUG("s626_ai_cmd: command received!!!\n");
 	}
 
 	if (dev->irq == 0) {
@@ -1880,7 +1880,7 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		devpriv->ai_continous = 0;
 		break;
 	case TRIG_NONE:
-		/*  continous aquisition */
+		/*  continous acquisition */
 		devpriv->ai_continous = 1;
 		devpriv->ai_sample_count = 0;
 		break;
@@ -2570,7 +2570,7 @@ static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
 	while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY)
 		;
 
-	/*  Return non-zero if I2C error occured. */
+	/*  Return non-zero if I2C error occurred. */
 	return RR7146(P_I2CCTRL) & I2C_ERR;
 
 }
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index be93c30e4b1..e543e6c2b1b 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -285,7 +285,7 @@ struct usbduxsub {
 	short int ao_cmd_running;
 	/* pwm is running */
 	short int pwm_cmd_running;
-	/* continous aquisition */
+	/* continous acquisition */
 	short int ai_continous;
 	short int ao_continous;
 	/* number of samples to acquire */
@@ -500,7 +500,7 @@ static void usbduxsub_ai_IsocIrq(struct urb *urb)
 
 	/* test, if we transmit only a fixed number of samples */
 	if (!(this_usbduxsub->ai_continous)) {
-		/* not continous, fixed number of samples */
+		/* not continuous, fixed number of samples */
 		this_usbduxsub->ai_sample_count--;
 		/* all samples received? */
 		if (this_usbduxsub->ai_sample_count < 0) {
@@ -653,7 +653,7 @@ static void usbduxsub_ao_IsocIrq(struct urb *urb)
 		/* timer zero */
 		this_usbduxsub->ao_counter = this_usbduxsub->ao_timer;
 
-		/* handle non continous aquisition */
+		/* handle non continous acquisition */
 		if (!(this_usbduxsub->ao_continous)) {
 			/* fixed number of samples */
 			this_usbduxsub->ao_sample_count--;
@@ -957,7 +957,7 @@ static int usbdux_ai_cmdtest(struct comedi_device *dev,
 	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
 		err++;
 
-	/* scanning is continous */
+	/* scanning is continuous */
 	tmp = cmd->convert_src;
 	cmd->convert_src &= TRIG_NOW;
 	if (!cmd->convert_src || tmp != cmd->convert_src)
@@ -1222,7 +1222,7 @@ static int usbdux_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		up(&this_usbduxsub->sem);
 		return -EBUSY;
 	}
-	/* set current channel of the running aquisition to zero */
+	/* set current channel of the running acquisition to zero */
 	s->async->cur_chan = 0;
 
 	this_usbduxsub->dux_commands[1] = cmd->chanlist_len;
@@ -1284,7 +1284,7 @@ static int usbdux_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		this_usbduxsub->ai_sample_count = cmd->stop_arg;
 		this_usbduxsub->ai_continous = 0;
 	} else {
-		/* continous aquisition */
+		/* continous acquisition */
 		this_usbduxsub->ai_continous = 1;
 		this_usbduxsub->ai_sample_count = 0;
 	}
@@ -1515,7 +1515,7 @@ static int usbdux_ao_cmdtest(struct comedi_device *dev,
 	/* just now we scan also in the high speed mode every frame */
 	/* this is due to ehci driver limitations */
 	if (0) {		/* (this_usbduxsub->high_speed) */
-		/* start immidiately a new scan */
+		/* start immediately a new scan */
 		/* the sampling rate is set by the coversion rate */
 		cmd->scan_begin_src &= TRIG_FOLLOW;
 	} else {
@@ -1525,7 +1525,7 @@ static int usbdux_ao_cmdtest(struct comedi_device *dev,
 	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
 		err++;
 
-	/* scanning is continous */
+	/* scanning is continuous */
 	tmp = cmd->convert_src;
 	/* we always output at 1kHz just now all channels at once */
 	if (0) {		/* (this_usbduxsub->high_speed) */
@@ -1645,7 +1645,7 @@ static int usbdux_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	dev_dbg(&this_usbduxsub->interface->dev,
 		"comedi%d: %s\n", dev->minor, __func__);
 
-	/* set current channel of the running aquisition to zero */
+	/* set current channel of the running acquisition to zero */
 	s->async->cur_chan = 0;
 	for (i = 0; i < cmd->chanlist_len; ++i) {
 		chan = CR_CHAN(cmd->chanlist[i]);
@@ -1694,7 +1694,7 @@ static int usbdux_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	this_usbduxsub->ao_counter = this_usbduxsub->ao_timer;
 
 	if (cmd->stop_src == TRIG_COUNT) {
-		/* not continous */
+		/* not continuous */
 		/* counter */
 		/* high speed also scans everything at once */
 		if (0) {	/* (this_usbduxsub->high_speed) */
@@ -1708,7 +1708,7 @@ static int usbdux_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		}
 		this_usbduxsub->ao_continous = 0;
 	} else {
-		/* continous aquisition */
+		/* continous acquisition */
 		this_usbduxsub->ao_continous = 1;
 		this_usbduxsub->ao_sample_count = 0;
 	}
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 5b15e6df54e..2a8e725b785 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -180,7 +180,7 @@ struct usbduxfastsub_s {
 	/* comedi device for the interrupt context */
 	struct comedi_device *comedidev;
 	short int ai_cmd_running;	/* asynchronous command is running */
-	short int ai_continous;	/* continous aquisition */
+	short int ai_continous;	/* continous acquisition */
 	long int ai_sample_count;	/* number of samples to acquire */
 	uint8_t *dux_commands;	/* commands */
 	int ignore;		/* counter which ignores the first
@@ -392,7 +392,7 @@ static void usbduxfastsub_ai_Irq(struct urb *urb)
 	p = urb->transfer_buffer;
 	if (!udfs->ignore) {
 		if (!udfs->ai_continous) {
-			/* not continous, fixed number of samples */
+			/* not continuous, fixed number of samples */
 			n = urb->actual_length / sizeof(uint16_t);
 			if (unlikely(udfs->ai_sample_count < n)) {
 				/*
@@ -775,7 +775,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
 		up(&udfs->sem);
 		return -EBUSY;
 	}
-	/* set current channel of the running aquisition to zero */
+	/* set current channel of the running acquisition to zero */
 	s->async->cur_chan = 0;
 
 	/*
@@ -1182,7 +1182,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
 		}
 		udfs->ai_continous = 0;
 	} else {
-		/* continous aquisition */
+		/* continous acquisition */
 		udfs->ai_continous = 1;
 		udfs->ai_sample_count = 0;
 	}
diff --git a/drivers/staging/cptm1217/clearpad_tm1217.c b/drivers/staging/cptm1217/clearpad_tm1217.c
index 76e4b782d2f..0fe713e72e9 100644
--- a/drivers/staging/cptm1217/clearpad_tm1217.c
+++ b/drivers/staging/cptm1217/clearpad_tm1217.c
@@ -52,7 +52,7 @@
 #define TMA1217_DEV_STATUS		0x13	/* Device Status */
 #define TMA1217_INT_STATUS		0x14	/* Interrupt Status */
 
-/* Controller can detect upto 2 possible finger touches.
+/* Controller can detect up to 2 possible finger touches.
  * Each finger touch provides  12 bit X Y co-ordinates, the values are split
  * across 2 registers, and an 8 bit  Z value */
 #define TMA1217_FINGER_STATE		0x18 /* Finger State */
diff --git a/drivers/staging/crystalhd/crystalhd_cmds.c b/drivers/staging/crystalhd/crystalhd_cmds.c
index 1429608544d..3735ed3da4c 100644
--- a/drivers/staging/crystalhd/crystalhd_cmds.c
+++ b/drivers/staging/crystalhd/crystalhd_cmds.c
@@ -914,7 +914,7 @@ enum BC_STATUS crystalhd_user_open(struct crystalhd_cmd *ctx,
  * Return:
  *	status
  *
- * Closer aplication handle and release app specific
+ * Closer application handle and release app specific
  * resources.
  */
 enum BC_STATUS crystalhd_user_close(struct crystalhd_cmd *ctx, struct crystalhd_user *uc)
diff --git a/drivers/staging/crystalhd/crystalhd_hw.c b/drivers/staging/crystalhd/crystalhd_hw.c
index 13a514dd0f7..5acf39e7cde 100644
--- a/drivers/staging/crystalhd/crystalhd_hw.c
+++ b/drivers/staging/crystalhd/crystalhd_hw.c
@@ -302,7 +302,7 @@ static bool crystalhd_start_device(struct crystalhd_adp *adp)
 	crystalhd_enable_interrupts(adp);
 
 	/* Enable the option for getting the total no. of DWORDS
-	 * that have been transfered by the RXDMA engine
+	 * that have been transferred by the RXDMA engine
 	 */
 	dbg_options = crystalhd_reg_rd(adp, MISC1_DMA_DEBUG_OPTIONS_REG);
 	dbg_options |= 0x10;
@@ -1776,7 +1776,7 @@ enum BC_STATUS crystalhd_do_fw_cmd(struct crystalhd_hw *hw,
 		return sts;
 	}
 
-	/*Get the Responce Address*/
+	/*Get the Response Address*/
 	cmd_res_addr = bc_dec_reg_rd(hw->adp, Cpu2HstMbx1);
 
 	/*Read the Response*/
@@ -2367,7 +2367,7 @@ enum BC_STATUS crystalhd_hw_set_core_clock(struct crystalhd_hw *hw)
 	BCMLOG(BCMLOG_INFO, "clock is moving to %d with n %d with vco_mg %d\n",
 	       hw->core_clock_mhz, n, vco_mg);
 
-	/* Change the DRAM refresh rate to accomodate the new frequency */
+	/* Change the DRAM refresh rate to accommodate the new frequency */
 	/* refresh reg = ((refresh_rate * clock_rate)/16) - 1; rounding up*/
 	refresh_reg = (7 * hw->core_clock_mhz / 16);
 	bc_dec_reg_wr(hw->adp, SDRAM_REF_PARAM, ((1 << 12) | refresh_reg));
diff --git a/drivers/staging/cxt1e1/musycc.c b/drivers/staging/cxt1e1/musycc.c
index f274c77fb3f..5cc3423a664 100644
--- a/drivers/staging/cxt1e1/musycc.c
+++ b/drivers/staging/cxt1e1/musycc.c
@@ -1455,7 +1455,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
             /*
              * If the descriptor has not recovered, then leaving the EMPTY
              * entry set will not signal to the MUSYCC that this descriptor
-             * has been serviced. The Interrupt Queue can then start loosing
+             * has been serviced. The Interrupt Queue can then start losing
              * available descriptors and MUSYCC eventually encounters and
              * reports the INTFULL condition.  Per manual, changing any bit
              * marks descriptor as available, thus the use of different
diff --git a/drivers/staging/cxt1e1/musycc.h b/drivers/staging/cxt1e1/musycc.h
index d2c91ef686d..68f3660f447 100644
--- a/drivers/staging/cxt1e1/musycc.h
+++ b/drivers/staging/cxt1e1/musycc.h
@@ -74,7 +74,7 @@ extern      "C"
 
 #define INT_QUEUE_SIZE    MUSYCC_NIQD
 
-/* RAM image of MUSYCC registers layed out as a C structure */
+/* RAM image of MUSYCC registers laid out as a C structure */
     struct musycc_groupr
     {
         VINT32      thp[32];    /* Transmit Head Pointer [5-29]           */
@@ -96,7 +96,7 @@ extern      "C"
         VINT32      pcd;        /* Port Configuration Descriptor [5-19]   */
     };
 
-/* hardware MUSYCC registers layed out as a C structure */
+/* hardware MUSYCC registers laid out as a C structure */
     struct musycc_globalr
     {
         VINT32      gbp;        /* Group Base Pointer                     */
diff --git a/drivers/staging/cxt1e1/pmcc4_defs.h b/drivers/staging/cxt1e1/pmcc4_defs.h
index 186347b8d56..a39505f45c2 100644
--- a/drivers/staging/cxt1e1/pmcc4_defs.h
+++ b/drivers/staging/cxt1e1/pmcc4_defs.h
@@ -54,8 +54,8 @@
 #define MUSYCC_MTU          2048  /* default */
 #define MUSYCC_TXDESC_MIN   10    /* HDLC mode default */
 #define MUSYCC_RXDESC_MIN   18    /* HDLC mode default */
-#define MUSYCC_TXDESC_TRANS 4     /* Transparent mode minumum # of TX descriptors */
-#define MUSYCC_RXDESC_TRANS 12    /* Transparent mode minumum # of RX descriptors */
+#define MUSYCC_TXDESC_TRANS 4     /* Transparent mode minimum # of TX descriptors */
+#define MUSYCC_RXDESC_TRANS 12    /* Transparent mode minimum # of RX descriptors */
 
 #define MAX_DEFAULT_IFQLEN  32    /* network qlen */
 
diff --git a/drivers/staging/cxt1e1/sbecrc.c b/drivers/staging/cxt1e1/sbecrc.c
index 51232948091..3f3cd60ac36 100644
--- a/drivers/staging/cxt1e1/sbecrc.c
+++ b/drivers/staging/cxt1e1/sbecrc.c
@@ -95,7 +95,7 @@ sbeCrc (u_int8_t *buffer,          /* data buffer to crc */
 
     /*
      * if table not yet created, do so. Don't care about "extra" time
-     * checking this everytime sbeCrc() is called, since CRC calculations are
+     * checking this every time sbeCrc() is called, since CRC calculations are
      * already time consuming
      */
     if (!crcTableInit)
diff --git a/drivers/staging/cxt1e1/sbeproc.c b/drivers/staging/cxt1e1/sbeproc.c
index 70b9b33f352..f42531c3d8d 100644
--- a/drivers/staging/cxt1e1/sbeproc.c
+++ b/drivers/staging/cxt1e1/sbeproc.c
@@ -239,7 +239,7 @@ sbecom_proc_get_sbe_info (char *buffer, char **start, off_t offset,
      */
 
 #if 1
-    /* #4 - intepretation of above = set EOF, return len */
+    /* #4 - interpretation of above = set EOF, return len */
     *eof = 1;
 #endif
 
diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h
index e6c8cb3828e..425e9274f28 100644
--- a/drivers/staging/et131x/et1310_address_map.h
+++ b/drivers/staging/et131x/et1310_address_map.h
@@ -856,7 +856,7 @@ typedef union _RXMAC_UNI_PF_ADDR3_t {
  */
 
 /*
- * structure for space availiable reg in rxmac address map.
+ * structure for space available reg in rxmac address map.
  * located at address 0x4094
  *
  * 31-17: reserved
@@ -1031,7 +1031,7 @@ typedef struct _RXMAC_t {				/* Location: */
  * 31: reset MII mgmt
  * 30-6: unused
  * 5: scan auto increment
- * 4: preamble supress
+ * 4: preamble suppress
  * 3: undefined
  * 2-0: mgmt clock reset
  */
diff --git a/drivers/staging/et131x/et1310_phy.h b/drivers/staging/et131x/et1310_phy.h
index 78349adc7d8..946c0c54740 100644
--- a/drivers/staging/et131x/et1310_phy.h
+++ b/drivers/staging/et131x/et1310_phy.h
@@ -468,7 +468,7 @@ typedef union _MI_ANAR_t {
 #define TRUEPHY_ANEG_COMPLETE           1
 #define TRUEPHY_ANEG_DISABLED           2
 
-/* Define duplex advertisment flags */
+/* Define duplex advertisement flags */
 #define TRUEPHY_ADV_DUPLEX_NONE         0x00
 #define TRUEPHY_ADV_DUPLEX_FULL         0x01
 #define TRUEPHY_ADV_DUPLEX_HALF         0x02
diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c
index 339136f64be..fc6bd438366 100644
--- a/drivers/staging/et131x/et1310_rx.c
+++ b/drivers/staging/et131x/et1310_rx.c
@@ -122,7 +122,7 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
 	 * number of entries in FBR1.
 	 *
 	 * FBR1 holds "large" frames, FBR0 holds "small" frames.  If FBR1
-	 * entries are huge in order to accomodate a "jumbo" frame, then it
+	 * entries are huge in order to accommodate a "jumbo" frame, then it
 	 * will have less entries.  Conversely, FBR1 will now be relied upon
 	 * to carry more "normal" frames, thus it's entry size also increases
 	 * and the number of entries goes up too (since it now carries
diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c
index ce4d9304267..f716e408712 100644
--- a/drivers/staging/et131x/et131x_isr.c
+++ b/drivers/staging/et131x/et131x_isr.c
@@ -466,7 +466,7 @@ void et131x_isr_handler(struct work_struct *work)
 		/* Handle SLV Timeout Interrupt */
 		if (status & ET_INTR_SLV_TIMEOUT) {
 			/*
-			 * This means a timeout has occured on a read or
+			 * This means a timeout has occurred on a read or
 			 * write request to one of the JAGCore registers. The
 			 * Global Resources block has terminated the request
 			 * and on a read request, returned a "fake" value.
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 0c298cae90d..b25bae29042 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -415,7 +415,7 @@ void et131x_multicast(struct net_device *netdev)
 	 */
 	PacketFilter = adapter->PacketFilter;
 
-	/* Clear the 'multicast' flag locally; becuase we only have a single
+	/* Clear the 'multicast' flag locally; because we only have a single
 	 * flag to check multicast, and multiple multicast addresses can be
 	 * set, this is the easiest way to determine if more than one
 	 * multicast address is being set.
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dev.h b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dev.h
index 4a89bd1bbf7..0b63f051f27 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dev.h
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dev.h
@@ -30,7 +30,7 @@
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_reg
-// Descripton: This function will read the value of a given ASIC register.
+// Description: This function will read the value of a given ASIC register.
 // Input:
 //     dev    - device structure
 //     offset - ASIC register offset
@@ -49,7 +49,7 @@ static inline u16 ft1000_read_reg (struct net_device *dev, u16 offset) {
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_write_reg
-// Descripton: This function will set the value for a given ASIC register.
+// Description: This function will set the value for a given ASIC register.
 // Input:
 //     dev    - device structure
 //     offset - ASIC register offset
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
index b0729fc3c89..fb375ea26dd 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
@@ -95,47 +95,47 @@ void put_request_value(struct net_device *dev, long lvalue);
 USHORT hdr_checksum(PPSEUDO_HDR pHdr);
 
 typedef struct _DSP_FILE_HDR {
-	long build_date;
-	long dsp_coff_date;
-	long loader_code_address;
-	long loader_code_size;
-	long loader_code_end;
-	long dsp_code_address;
-	long dsp_code_size;
-	long dsp_code_end;
-	long reserved[8];
+	u32  build_date;
+	u32  dsp_coff_date;
+	u32  loader_code_address;
+	u32  loader_code_size;
+	u32  loader_code_end;
+	u32  dsp_code_address;
+	u32  dsp_code_size;
+	u32  dsp_code_end;
+	u32  reserved[8];
 } __attribute__ ((packed)) DSP_FILE_HDR, *PDSP_FILE_HDR;
 
 typedef struct _DSP_FILE_HDR_5 {
-	long version_id;	// Version ID of this image format.
-	long package_id;	// Package ID of code release.
-	long build_date;	// Date/time stamp when file was built.
-	long commands_offset;	// Offset to attached commands in Pseudo Hdr format.
-	long loader_offset;	// Offset to bootloader code.
-	long loader_code_address;	// Start address of bootloader.
-	long loader_code_end;	// Where bootloader code ends.
-	long loader_code_size;
-	long version_data_offset;	// Offset were scrambled version data begins.
-	long version_data_size;	// Size, in words, of scrambled version data.
-	long nDspImages;	// Number of DSP images in file.
+	u32  version_id;	// Version ID of this image format.
+	u32  package_id;	// Package ID of code release.
+	u32  build_date;	// Date/time stamp when file was built.
+	u32  commands_offset;	// Offset to attached commands in Pseudo Hdr format.
+	u32  loader_offset;	// Offset to bootloader code.
+	u32  loader_code_address;	// Start address of bootloader.
+	u32  loader_code_end;	// Where bootloader code ends.
+	u32  loader_code_size;
+	u32  version_data_offset;	// Offset were scrambled version data begins.
+	u32  version_data_size;	// Size, in words, of scrambled version data.
+	u32  nDspImages;	// Number of DSP images in file.
 } __attribute__ ((packed)) DSP_FILE_HDR_5, *PDSP_FILE_HDR_5;
 
 typedef struct _DSP_IMAGE_INFO {
-	long coff_date;		// Date/time when DSP Coff image was built.
-	long begin_offset;	// Offset in file where image begins.
-	long end_offset;	// Offset in file where image begins.
-	long run_address;	// On chip Start address of DSP code.
-	long image_size;	// Size of image.
-	long version;		// Embedded version # of DSP code.
+	u32  coff_date;		// Date/time when DSP Coff image was built.
+	u32  begin_offset;	// Offset in file where image begins.
+	u32  end_offset;	// Offset in file where image begins.
+	u32  run_address;	// On chip Start address of DSP code.
+	u32  image_size;	// Size of image.
+	u32  version;		// Embedded version # of DSP code.
 } __attribute__ ((packed)) DSP_IMAGE_INFO, *PDSP_IMAGE_INFO;
 
 typedef struct _DSP_IMAGE_INFO_V6 {
-	long coff_date;		// Date/time when DSP Coff image was built.
-	long begin_offset;	// Offset in file where image begins.
-	long end_offset;	// Offset in file where image begins.
-	long run_address;	// On chip Start address of DSP code.
-	long image_size;	// Size of image.
-	long version;		// Embedded version # of DSP code.
+	u32  coff_date;		// Date/time when DSP Coff image was built.
+	u32  begin_offset;	// Offset in file where image begins.
+	u32  end_offset;	// Offset in file where image begins.
+	u32  run_address;	// On chip Start address of DSP code.
+	u32  image_size;	// Size of image.
+	u32  version;		// Embedded version # of DSP code.
 	unsigned short checksum;	// Dsp File checksum
 	unsigned short pad1;
 } __attribute__ ((packed)) DSP_IMAGE_INFO_V6, *PDSP_IMAGE_INFO_V6;
@@ -846,8 +846,8 @@ int card_download(struct net_device *dev, const u8 *pFileStart, UINT FileLength)
 			break;
 
 		case STATE_DONE_DWNLD:
-			if (((UINT) (pUcFile) - (UINT) pFileStart) >=
-				(UINT) FileLength) {
+			if (((unsigned long) (pUcFile) - (unsigned long) pFileStart) >=
+				(unsigned long) FileLength) {
 				uiState = STATE_DONE_FILE;
 				break;
 			}
@@ -901,11 +901,11 @@ int card_download(struct net_device *dev, const u8 *pFileStart, UINT FileLength)
 								  &info->prov_list);
 						// Move to next entry if available
 						pUcFile =
-							(UCHAR *) ((UINT) pUcFile +
-								   (UINT) ((usHdrLength + 1) & 0xFFFFFFFE) + sizeof(PSEUDO_HDR));
-						if ((UINT) (pUcFile) -
-							(UINT) (pFileStart) >=
-							(UINT) FileLength) {
+							(UCHAR *) ((unsigned long) pUcFile +
+								   (unsigned long) ((usHdrLength + 1) & 0xFFFFFFFE) + sizeof(PSEUDO_HDR));
+						if ((unsigned long) (pUcFile) -
+							(unsigned long) (pFileStart) >=
+							(unsigned long) FileLength) {
 							uiState =
 								STATE_DONE_FILE;
 						}
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index ff691d9b984..830822f86e4 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -90,7 +90,7 @@ MODULE_SUPPORTED_DEVICE("FT1000");
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_asic_read
-// Descripton: This function will retrieve the value of a specific ASIC
+// Description: This function will retrieve the value of a specific ASIC
 //             register.
 // Input:
 //    dev - network device structure
@@ -107,7 +107,7 @@ inline u16 ft1000_asic_read(struct net_device *dev, u16 offset)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_asic_write
-// Descripton: This function will set the value of a specific ASIC
+// Description: This function will set the value of a specific ASIC
 //             register.
 // Input:
 //    dev - network device structure
@@ -124,7 +124,7 @@ inline void ft1000_asic_write(struct net_device *dev, u16 offset, u16 value)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_fifo_len
-// Descripton: This function will read the ASIC Uplink FIFO status register
+// Description: This function will read the ASIC Uplink FIFO status register
 //             which will return the number of bytes remaining in the Uplink FIFO.
 //             Sixteen bytes are subtracted to make sure that the ASIC does not
 //             reach its threshold.
@@ -148,7 +148,7 @@ static inline u16 ft1000_read_fifo_len(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_dpram
-// Descripton: This function will read the specific area of dpram
+// Description: This function will read the specific area of dpram
 //             (Electrabuzz ASIC only)
 // Input:
 //     dev    - device structure
@@ -175,7 +175,7 @@ u16 ft1000_read_dpram(struct net_device * dev, int offset)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_write_dpram
-// Descripton: This function will write to a specific area of dpram
+// Description: This function will write to a specific area of dpram
 //             (Electrabuzz ASIC only)
 // Input:
 //     dev    - device structure
@@ -201,7 +201,7 @@ static inline void ft1000_write_dpram(struct net_device *dev,
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_dpram_mag_16
-// Descripton: This function will read the specific area of dpram
+// Description: This function will read the specific area of dpram
 //             (Magnemite ASIC only)
 // Input:
 //     dev    - device structure
@@ -233,7 +233,7 @@ u16 ft1000_read_dpram_mag_16(struct net_device *dev, int offset, int Index)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_write_dpram_mag_16
-// Descripton: This function will write to a specific area of dpram
+// Description: This function will write to a specific area of dpram
 //             (Magnemite ASIC only)
 // Input:
 //     dev    - device structure
@@ -263,7 +263,7 @@ static inline void ft1000_write_dpram_mag_16(struct net_device *dev,
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_dpram_mag_32
-// Descripton: This function will read the specific area of dpram
+// Description: This function will read the specific area of dpram
 //             (Magnemite ASIC only)
 // Input:
 //     dev    - device structure
@@ -290,7 +290,7 @@ u32 ft1000_read_dpram_mag_32(struct net_device *dev, int offset)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_write_dpram_mag_32
-// Descripton: This function will write to a specific area of dpram
+// Description: This function will write to a specific area of dpram
 //             (Magnemite ASIC only)
 // Input:
 //     dev    - device structure
@@ -315,7 +315,7 @@ void ft1000_write_dpram_mag_32(struct net_device *dev, int offset, u32 value)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_enable_interrupts
-// Descripton: This function will enable interrupts base on the current interrupt mask.
+// Description: This function will enable interrupts base on the current interrupt mask.
 // Input:
 //     dev    - device structure
 // Output:
@@ -340,7 +340,7 @@ static void ft1000_enable_interrupts(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_disable_interrupts
-// Descripton: This function will disable all interrupts.
+// Description: This function will disable all interrupts.
 // Input:
 //     dev    - device structure
 // Output:
@@ -364,7 +364,7 @@ static void ft1000_disable_interrupts(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_reset_asic
-// Descripton: This function will call the Card Service function to reset the
+// Description: This function will call the Card Service function to reset the
 //             ASIC.
 // Input:
 //     dev    - device structure
@@ -408,7 +408,7 @@ static void ft1000_reset_asic(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_reset_card
-// Descripton: This function will reset the card
+// Description: This function will reset the card
 // Input:
 //     dev    - device structure
 // Output:
@@ -571,7 +571,7 @@ static int ft1000_reset_card(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_chkcard
-// Descripton: This function will check if the device is presently available on
+// Description: This function will check if the device is presently available on
 //             the system.
 // Input:
 //     dev    - device structure
@@ -607,7 +607,7 @@ static int ft1000_chkcard(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_hbchk
-// Descripton: This function will perform the heart beat check of the DSP as
+// Description: This function will perform the heart beat check of the DSP as
 //             well as the ASIC.
 // Input:
 //     dev    - device structure
@@ -828,7 +828,7 @@ static void ft1000_hbchk(u_long data)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_send_cmd
-// Descripton:
+// Description:
 // Input:
 // Output:
 //
@@ -908,7 +908,7 @@ void ft1000_send_cmd (struct net_device *dev, u16 *ptempbuffer, int size, u16 qt
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_receive_cmd
-// Descripton: This function will read a message from the dpram area.
+// Description: This function will read a message from the dpram area.
 // Input:
 //    dev - network device structure
 //    pbuffer - caller supply address to buffer
@@ -1003,7 +1003,7 @@ BOOLEAN ft1000_receive_cmd(struct net_device *dev, u16 * pbuffer, int maxsz, u16
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_proc_drvmsg
-// Descripton: This function will process the various driver messages.
+// Description: This function will process the various driver messages.
 // Input:
 //     dev    - device structure
 //     pnxtph - pointer to next pseudo header
@@ -1285,7 +1285,7 @@ void ft1000_proc_drvmsg(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_parse_dpram_msg
-// Descripton: This function will parse the message received from the DSP
+// Description: This function will parse the message received from the DSP
 //             via the DPRAM interface.
 // Input:
 //     dev    - device structure
@@ -1442,7 +1442,7 @@ int ft1000_parse_dpram_msg(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_flush_fifo
-// Descripton: This function will flush one packet from the downlink
+// Description: This function will flush one packet from the downlink
 //             FIFO.
 // Input:
 //     dev      - device structure
@@ -1587,7 +1587,7 @@ static void ft1000_flush_fifo(struct net_device *dev, u16 DrvErrNum)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_copy_up_pkt
-// Descripton: This function will pull Flarion packets out of the Downlink
+// Description: This function will pull Flarion packets out of the Downlink
 //             FIFO and convert it to an ethernet packet.  The ethernet packet will
 //             then be deliver to the TCP/IP stack.
 // Input:
@@ -1773,7 +1773,7 @@ int ft1000_copy_up_pkt(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_copy_down_pkt
-// Descripton: This function will take an ethernet packet and convert it to
+// Description: This function will take an ethernet packet and convert it to
 //             a Flarion packet prior to sending it to the ASIC Downlink
 //             FIFO.
 // Input:
@@ -2288,7 +2288,3 @@ err_dev:
 	free_netdev(dev);
 	return NULL;
 }
-
-EXPORT_SYMBOL(init_ft1000_card);
-EXPORT_SYMBOL(stop_ft1000_card);
-EXPORT_SYMBOL(flarion_ft1000_cnt);
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
index 935608e7200..bdfb1aec58d 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
@@ -214,6 +214,3 @@ void ft1000CleanupProc(struct net_device *dev)
 	remove_proc_entry(FT1000_PROC, init_net.proc_net);
 	unregister_netdevice_notifier(&ft1000_netdev_notifier);
 }
-
-EXPORT_SYMBOL(ft1000InitProc);
-EXPORT_SYMBOL(ft1000CleanupProc);
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
index 8e622425aa1..1972b72450d 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
@@ -488,7 +488,7 @@ static int check_buffers(u16 *buff_w, u16 *buff_r, int len, int offset)
 // Parameters:  struct ft1000_device  - device structure
 //              u16 **pUsFile - DSP image file pointer in u16
 //              u8  **pUcFile - DSP image file pointer in u8
-//              long   word_length - lenght of the buffer to be written
+//              long   word_length - length of the buffer to be written
 //                                   to DPRAM
 //
 // Returns:     STATUS_SUCCESS - success
@@ -628,7 +628,7 @@ static void usb_dnld_complete (struct urb *urb)
 // Parameters:  struct ft1000_device  - device structure
 //              u16 **pUsFile - DSP image file pointer in u16
 //              u8  **pUcFile - DSP image file pointer in u8
-//              long   word_length - lenght of the buffer to be written
+//              long   word_length - length of the buffer to be written
 //                                   to DPRAM
 //
 // Returns:     STATUS_SUCCESS - success
@@ -817,7 +817,7 @@ u16 scram_dnldr(struct ft1000_device *ft1000dev, void *pFileStart,
 						 * Error, beyond boot code range.
 						 */
 						DEBUG
-						    ("FT1000:download:Download error: Requested len=%d exceeds BOOT code boundry.\n",
+						    ("FT1000:download:Download error: Requested len=%d exceeds BOOT code boundary.\n",
 						     (int)word_length);
 						status = STATUS_FAILURE;
 						break;
@@ -950,7 +950,7 @@ u16 scram_dnldr(struct ft1000_device *ft1000dev, void *pFileStart,
 						 * Error, beyond boot code range.
 						 */
 						DEBUG
-						    ("FT1000:download:Download error: Requested len=%d exceeds DSP code boundry.\n",
+						    ("FT1000:download:Download error: Requested len=%d exceeds DSP code boundary.\n",
 						     (int)word_length);
 						status = STATUS_FAILURE;
 						break;
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index 78dcd49bb98..684e69eacb7 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -585,7 +585,7 @@ int dsp_reload(struct ft1000_device *ft1000dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_reset_asic
-// Descripton: This function will call the Card Service function to reset the
+// Description: This function will call the Card Service function to reset the
 //             ASIC.
 // Input:
 //     dev    - device structure
@@ -626,7 +626,7 @@ static void ft1000_reset_asic(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_reset_card
-// Descripton: This function will reset the card
+// Description: This function will reset the card
 // Input:
 //     dev    - device structure
 // Output:
@@ -917,7 +917,7 @@ static void ft1000_usb_transmit_complete(struct urb *urb)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_copy_down_pkt
-// Descripton: This function will take an ethernet packet and convert it to
+// Description: This function will take an ethernet packet and convert it to
 //             a Flarion packet prior to sending it to the ASIC Downlink
 //             FIFO.
 // Input:
@@ -1075,10 +1075,10 @@ err:
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_copy_up_pkt
-// Descripton: This function will take a packet from the FIFO up link and
+// Description: This function will take a packet from the FIFO up link and
 //             convert it into an ethernet packet and deliver it to the IP stack
 // Input:
-//     urb - the receving usb urb
+//     urb - the receiving usb urb
 //
 // Output:
 //     status - FAILURE
@@ -1182,7 +1182,7 @@ static int ft1000_copy_up_pkt(struct urb *urb)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_submit_rx_urb
-// Descripton: the receiving function of the network driver
+// Description: the receiving function of the network driver
 //
 // Input:
 //     info - a private structure contains the device information
@@ -1316,7 +1316,7 @@ Jim
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_chkcard
-// Descripton: This function will check if the device is presently available on
+// Description: This function will check if the device is presently available on
 //             the system.
 // Input:
 //     dev    - device structure
@@ -1363,7 +1363,7 @@ static int ft1000_chkcard(struct ft1000_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_receive_cmd
-// Descripton: This function will read a message from the dpram area.
+// Description: This function will read a message from the dpram area.
 // Input:
 //    dev - network device structure
 //    pbuffer - caller supply address to buffer
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h b/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
index 3f72d5bb3f9..6a8a1969f9e 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
@@ -55,7 +55,7 @@ struct pseudo_hdr {
    unsigned char     seq_num;          //sequence number
    unsigned char     rsvd2;            //reserved
    unsigned short    qos_class;        //Quality of Service class (Not applicable on Mobile)
-   unsigned short    checksum;         //Psuedo header checksum
+   unsigned short    checksum;         //Pseudo header checksum
 } __attribute__ ((packed));
 
 typedef struct _IOCTL_GET_VER
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
index e047c03fbf3..f2ecb3eae9c 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
@@ -364,7 +364,7 @@ struct prov_record {
 
 #define ISR_EMPTY			(u8)0x00 	 // no bits set in ISR
 
-#define ISR_DOORBELL_ACK	(u8)0x01		 //  the doorbell i sent has been recieved.
+#define ISR_DOORBELL_ACK	(u8)0x01		 //  the doorbell i sent has been received.
 
 #define ISR_DOORBELL_PEND	(u8)0x02 	 //  doorbell for me
 
diff --git a/drivers/staging/generic_serial/generic_serial.c b/drivers/staging/generic_serial/generic_serial.c
index 466988dbc37..f29dda4e9f2 100644
--- a/drivers/staging/generic_serial/generic_serial.c
+++ b/drivers/staging/generic_serial/generic_serial.c
@@ -113,7 +113,7 @@ int gs_write(struct tty_struct * tty,
 
 		c = count;
  
-		/* This is safe because we "OWN" the "head". Noone else can 
+		/* This is safe because we "OWN" the "head". No one else can 
 		   change the "head": we own the port_write_mutex. */
 		/* Don't overrun the end of the buffer */
 		t = SERIAL_XMIT_SIZE - port->xmit_head;
diff --git a/drivers/staging/generic_serial/rio/map.h b/drivers/staging/generic_serial/rio/map.h
index 8366978578c..28a66129293 100644
--- a/drivers/staging/generic_serial/rio/map.h
+++ b/drivers/staging/generic_serial/rio/map.h
@@ -87,7 +87,7 @@ struct Map {
 ** The Topology array contains the ID of the unit connected to each of the
 ** four links on this unit. The entry will be 0xFFFF if NOTHING is connected
 ** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link.
-** The Name field is a null-terminated string, upto 31 characters, containing
+** The Name field is a null-terminated string, up to 31 characters, containing
 ** the 'cute' name that the sysadmin/users know the RTA by. It is permissible
 ** for this string to contain any character in the range \040 to \176 inclusive.
 ** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The
diff --git a/drivers/staging/generic_serial/rio/rioboot.c b/drivers/staging/generic_serial/rio/rioboot.c
index d956dd31600..ffa01c59021 100644
--- a/drivers/staging/generic_serial/rio/rioboot.c
+++ b/drivers/staging/generic_serial/rio/rioboot.c
@@ -109,7 +109,7 @@ int RIOBootCodeRTA(struct rio_info *p, struct DownLoad * rbp)
 	rio_dprintk(RIO_DEBUG_BOOT, "Data at user address %p\n", rbp->DataP);
 
 	/*
-	 ** Check that we have set asside enough memory for this
+	 ** Check that we have set aside enough memory for this
 	 */
 	if (rbp->Count > SIXTY_FOUR_K) {
 		rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n");
@@ -293,7 +293,7 @@ int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp)
 		/*
 		 **                     S T O P !
 		 **
-		 ** Upto this point the code has been fairly rational, and possibly
+		 ** Up to this point the code has been fairly rational, and possibly
 		 ** even straight forward. What follows is a pile of crud that will
 		 ** magically turn into six bytes of transputer assembler. Normally
 		 ** you would expect an array or something, but, being me, I have
@@ -419,7 +419,7 @@ int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp)
 		rio_dprintk(RIO_DEBUG_BOOT, "Set control port\n");
 
 		/*
-		 ** Now, wait for upto five seconds for the Tp to setup the parmmap
+		 ** Now, wait for up to five seconds for the Tp to setup the parmmap
 		 ** pointer:
 		 */
 		for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && (readw(&HostP->__ParmMapR) == OldParmMap); wait_count++) {
@@ -475,7 +475,7 @@ int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp)
 
 		/*
 		 ** now wait for the card to set all the parmmap->XXX stuff
-		 ** this is a wait of upto two seconds....
+		 ** this is a wait of up to two seconds....
 		 */
 		rio_dprintk(RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n", p->RIOConf.StartupTime);
 		HostP->timeout_id = 0;
diff --git a/drivers/staging/generic_serial/rio/riocmd.c b/drivers/staging/generic_serial/rio/riocmd.c
index f121357e5af..61efd538e85 100644
--- a/drivers/staging/generic_serial/rio/riocmd.c
+++ b/drivers/staging/generic_serial/rio/riocmd.c
@@ -863,7 +863,7 @@ int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP)
 	 ** being transferred from the write queue into the transmit packets
 	 ** (add_transmit) and no furthur transmit interrupt will be sent for that
 	 ** data. The next interrupt will occur up to 500ms later (RIOIntr is called
-	 ** twice a second as a saftey measure). This was the case when kermit was
+	 ** twice a second as a safety measure). This was the case when kermit was
 	 ** used to send data into a RIO port. After each packet was sent, TCFLSH
 	 ** was called to flush the read queue preemptively. PortP->InUse was
 	 ** incremented, thereby blocking the 6 byte acknowledgement packet
diff --git a/drivers/staging/generic_serial/rio/rioroute.c b/drivers/staging/generic_serial/rio/rioroute.c
index f9b936ac339..8757378e832 100644
--- a/drivers/staging/generic_serial/rio/rioroute.c
+++ b/drivers/staging/generic_serial/rio/rioroute.c
@@ -450,7 +450,7 @@ int RIORouteRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct
 		 ** we reset the unit, because we didn't boot it.
 		 ** However, if the table is full, it could be that we did boot
 		 ** this unit, and so we won't reboot it, because it isn't really
-		 ** all that disasterous to keep the old bins in most cases. This
+		 ** all that disastrous to keep the old bins in most cases. This
 		 ** is a rather tacky feature, but we are on the edge of reallity
 		 ** here, because the implication is that someone has connected
 		 ** 16+MAX_EXTRA_UNITS onto one host.
@@ -678,7 +678,7 @@ static int RIOCheck(struct Host *HostP, unsigned int UnitId)
 
 	HostP->Mapping[UnitId].Flags &= ~BEEN_HERE;
 
-	/* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESNT KNOW THE HOST!\n", UnitId)); */
+	/* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESN'T KNOW THE HOST!\n", UnitId)); */
 
 	return 0;
 }
diff --git a/drivers/staging/generic_serial/rio/riotty.c b/drivers/staging/generic_serial/rio/riotty.c
index 8a90393faf3..e7e9911d7a7 100644
--- a/drivers/staging/generic_serial/rio/riotty.c
+++ b/drivers/staging/generic_serial/rio/riotty.c
@@ -124,7 +124,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
 	}
 
 	/*
-	 ** Grab pointer to the port stucture
+	 ** Grab pointer to the port structure
 	 */
 	PortP = p->RIOPortp[SysPort];	/* Get control struc */
 	rio_dprintk(RIO_DEBUG_TTY, "PortP: %p\n", PortP);
@@ -161,7 +161,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
 	}
 
 	/*
-	 ** If the RTA has not booted yet and the user has choosen to block
+	 ** If the RTA has not booted yet and the user has chosen to block
 	 ** until the RTA is present then we must spin here waiting for
 	 ** the RTA to boot.
 	 */
diff --git a/drivers/staging/generic_serial/sx.c b/drivers/staging/generic_serial/sx.c
index 1291462bcdd..4f94aaffbe8 100644
--- a/drivers/staging/generic_serial/sx.c
+++ b/drivers/staging/generic_serial/sx.c
@@ -158,13 +158,13 @@
  * Readying for release on 2.0.x (sorry David, 1.01 becomes 1.1 for RCS). 
  *
  * Revision 0.12  1999/03/28 09:20:10  wolff
- * Fixed problem in 0.11, continueing cleanup.
+ * Fixed problem in 0.11, continuing cleanup.
  *
  * Revision 0.11  1999/03/28 08:46:44  wolff
  * cleanup. Not good.
  *
  * Revision 0.10  1999/03/28 08:09:43  wolff
- * Fixed loosing characters on close.
+ * Fixed losing characters on close.
  *
  * Revision 0.9  1999/03/21 22:52:01  wolff
  * Ported back to 2.2.... (minor things)
@@ -1588,7 +1588,7 @@ static void sx_close(void *ptr)
 #define R0		if (read_sx_byte(board, i) != 0x55) return 1
 #define R1		if (read_sx_byte(board, i) != 0xaa) return 1
 
-/* This memtest takes a human-noticable time. You normally only do it
+/* This memtest takes a human-noticeable time. You normally only do it
    once a boot, so I guess that it is worth it. */
 static int do_memtest(struct sx_board *board, int min, int max)
 {
@@ -1645,7 +1645,7 @@ static int do_memtest(struct sx_board *board, int min, int max)
 #define R1		if (read_sx_word(board, i) != 0xaa55) return 1
 
 #if 0
-/* This memtest takes a human-noticable time. You normally only do it
+/* This memtest takes a human-noticeable time. You normally only do it
    once a boot, so I guess that it is worth it. */
 static int do_memtest_w(struct sx_board *board, int min, int max)
 {
diff --git a/drivers/staging/gma500/Kconfig b/drivers/staging/gma500/Kconfig
index 5501eb9b335..ce8bedaeaac 100644
--- a/drivers/staging/gma500/Kconfig
+++ b/drivers/staging/gma500/Kconfig
@@ -1,6 +1,6 @@
 config DRM_PSB
 	tristate "Intel GMA500 KMS Framebuffer"
-	depends on DRM && PCI
+	depends on DRM && PCI && X86
 	select FB_CFB_COPYAREA
         select FB_CFB_FILLRECT
         select FB_CFB_IMAGEBLIT
diff --git a/drivers/staging/gma500/psb_drm.h b/drivers/staging/gma500/psb_drm.h
index fb9b4245bad..a339406052e 100644
--- a/drivers/staging/gma500/psb_drm.h
+++ b/drivers/staging/gma500/psb_drm.h
@@ -131,7 +131,7 @@ struct drm_psb_reloc {
 	u32 pre_add;	/* Destination format: */
 	u32 background;	/* Destination add */
 	u32 dst_buffer;	/* Destination buffer. Index into buffer_list */
-	u32 arg0;		/* Reloc-op dependant */
+	u32 arg0;		/* Reloc-op dependent */
 	u32 arg1;
 };
 
diff --git a/drivers/staging/gma500/psb_drv.c b/drivers/staging/gma500/psb_drv.c
index 44cd095d286..d01d45e7a14 100644
--- a/drivers/staging/gma500/psb_drv.c
+++ b/drivers/staging/gma500/psb_drv.c
@@ -561,7 +561,7 @@ static int psb_driver_unload(struct drm_device *dev)
 		kfree(dev_priv);
 		dev->dev_private = NULL;
 
-		/*destory VBT data*/
+		/*destroy VBT data*/
 		psb_intel_destroy_bios(dev);
 	}
 
diff --git a/drivers/staging/gma500/psb_intel_bios.c b/drivers/staging/gma500/psb_intel_bios.c
index f5bcd119b87..48ac8ba7f40 100644
--- a/drivers/staging/gma500/psb_intel_bios.c
+++ b/drivers/staging/gma500/psb_intel_bios.c
@@ -271,7 +271,7 @@ bool psb_intel_init_bios(struct drm_device *dev)
 }
 
 /**
- * Destory and free VBT data
+ * Destroy and free VBT data
  */
 void psb_intel_destroy_bios(struct drm_device *dev)
 {
diff --git a/drivers/staging/gma500/psb_intel_sdvo.c b/drivers/staging/gma500/psb_intel_sdvo.c
index 731a5a2261d..1d2bb021c0a 100644
--- a/drivers/staging/gma500/psb_intel_sdvo.c
+++ b/drivers/staging/gma500/psb_intel_sdvo.c
@@ -573,7 +573,7 @@ static bool psb_sdvo_set_current_inoutmap(struct psb_intel_output *output,
 	/* Make all fields of the  args/ret to zero */
 	memset(byArgs, 0, sizeof(byArgs));
 
-	/* Fill up the arguement values; */
+	/* Fill up the argument values; */
 	byArgs[0] = (u8) (in0outputmask & 0xFF);
 	byArgs[1] = (u8) ((in0outputmask >> 8) & 0xFF);
 	byArgs[2] = (u8) (in1outputmask & 0xFF);
diff --git a/drivers/staging/gma500/psb_intel_sdvo_regs.h b/drivers/staging/gma500/psb_intel_sdvo_regs.h
index a1d1475a931..c7107a37e33 100644
--- a/drivers/staging/gma500/psb_intel_sdvo_regs.h
+++ b/drivers/staging/gma500/psb_intel_sdvo_regs.h
@@ -217,7 +217,7 @@ struct psb_intel_sdvo_set_target_input_args {
 } __attribute__ ((packed));
 
 /**
- * Takes a struct psb_intel_sdvo_output_flags of which outputs are targetted by
+ * Takes a struct psb_intel_sdvo_output_flags of which outputs are targeted by
  * future output commands.
  *
  * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
diff --git a/drivers/staging/gma500/psb_ttm_fence_user.h b/drivers/staging/gma500/psb_ttm_fence_user.h
index fc13f89c6e1..762a0572863 100644
--- a/drivers/staging/gma500/psb_ttm_fence_user.h
+++ b/drivers/staging/gma500/psb_ttm_fence_user.h
@@ -130,7 +130,7 @@ struct ttm_fence_unref_arg {
 };
 
 /*
- * Ioctl offsets frome extenstion start.
+ * Ioctl offsets from extenstion start.
  */
 
 #define TTM_FENCE_SIGNALED 0x01
diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/go7007/go7007.txt
index 06a76da3212..9db1f3952fd 100644
--- a/drivers/staging/go7007/go7007.txt
+++ b/drivers/staging/go7007/go7007.txt
@@ -2,7 +2,7 @@ This is a driver for the WIS GO7007SB multi-format video encoder.
 
 Pete Eberlein <pete@sensoray.com>
 
-The driver was orignally released under the GPL and is currently hosted at:
+The driver was originally released under the GPL and is currently hosted at:
 http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
 The go7007 firmware can be acquired from the package on the site above.
 
diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c
index af789937be4..68ad17d6709 100644
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -894,7 +894,7 @@ static int blkvsc_submit_request(struct blkvsc_request *blkvsc_req,
 
 /*
  * We break the request into 1 or more blkvsc_requests and submit
- * them.  If we cant submit them all, we put them on the
+ * them.  If we can't submit them all, we put them on the
  * pending_list. The blkvsc_request() will work on the pending_list.
  */
 static int blkvsc_do_request(struct block_device_context *blkdev,
diff --git a/drivers/staging/hv/channel.c b/drivers/staging/hv/channel.c
index 775a52a9122..f7ce7d2494b 100644
--- a/drivers/staging/hv/channel.c
+++ b/drivers/staging/hv/channel.c
@@ -81,14 +81,14 @@ static void vmbus_setevent(struct vmbus_channel *channel)
 
 	if (channel->offermsg.monitor_allocated) {
 		/* Each u32 represents 32 channels */
-		set_bit(channel->offermsg.child_relid & 31,
+		sync_set_bit(channel->offermsg.child_relid & 31,
 			(unsigned long *) vmbus_connection.send_int_page +
 			(channel->offermsg.child_relid >> 5));
 
 		monitorpage = vmbus_connection.monitor_pages;
 		monitorpage++; /* Get the child to parent monitor page */
 
-		set_bit(channel->monitor_bit,
+		sync_set_bit(channel->monitor_bit,
 			(unsigned long *)&monitorpage->trigger_group
 					[channel->monitor_grp].pending);
 
@@ -104,7 +104,7 @@ static void VmbusChannelClearEvent(struct vmbus_channel *channel)
 
 	if (Channel->offermsg.monitor_allocated) {
 		/* Each u32 represents 32 channels */
-		clear_bit(Channel->offermsg.child_relid & 31,
+		sync_clear_bit(Channel->offermsg.child_relid & 31,
 			  (unsigned long *)vmbus_connection.send_int_page +
 			  (Channel->offermsg.child_relid >> 5));
 
@@ -112,7 +112,7 @@ static void VmbusChannelClearEvent(struct vmbus_channel *channel)
 			vmbus_connection.monitor_pages;
 		monitorPage++; /* Get the child to parent monitor page */
 
-		clear_bit(Channel->monitor_bit,
+		sync_clear_bit(Channel->monitor_bit,
 			  (unsigned long *)&monitorPage->trigger_group
 					[Channel->monitor_grp].Pending);
 	}
diff --git a/drivers/staging/hv/channel_mgmt.c b/drivers/staging/hv/channel_mgmt.c
index bc0393a41d2..06b573227e8 100644
--- a/drivers/staging/hv/channel_mgmt.c
+++ b/drivers/staging/hv/channel_mgmt.c
@@ -166,7 +166,7 @@ EXPORT_SYMBOL(prep_negotiate_resp);
  * from Hyper-V. This stub responds to the default negotiate messages
  * that come in for every non IDE/SCSI/Network request.
  * This behavior is normally overwritten in the hv_utils driver. That
- * driver handles requests like gracefull shutdown, heartbeats etc.
+ * driver handles requests like graceful shutdown, heartbeats etc.
  *
  * Mainly used by Hyper-V drivers.
  */
diff --git a/drivers/staging/hv/connection.c b/drivers/staging/hv/connection.c
index 44b203b95a2..afc8116e7aa 100644
--- a/drivers/staging/hv/connection.c
+++ b/drivers/staging/hv/connection.c
@@ -296,7 +296,7 @@ void vmbus_on_event(unsigned long data)
 		for (dword = 0; dword < maxdword; dword++) {
 			if (recv_int_page[dword]) {
 				for (bit = 0; bit < 32; bit++) {
-					if (test_and_clear_bit(bit,
+					if (sync_test_and_clear_bit(bit,
 						(unsigned long *)
 						&recv_int_page[dword])) {
 						relid = (dword << 5) + bit;
@@ -338,7 +338,7 @@ int vmbus_post_msg(void *buffer, size_t buflen)
 int vmbus_set_event(u32 child_relid)
 {
 	/* Each u32 represents 32 channels */
-	set_bit(child_relid & 31,
+	sync_set_bit(child_relid & 31,
 		(unsigned long *)vmbus_connection.send_int_page +
 		(child_relid >> 5));
 
diff --git a/drivers/staging/hv/hv.c b/drivers/staging/hv/hv.c
index 2d492adb95b..0b06f4fe583 100644
--- a/drivers/staging/hv/hv.c
+++ b/drivers/staging/hv/hv.c
@@ -37,7 +37,7 @@ struct hv_context hv_context = {
 
 /*
  * query_hypervisor_presence
- * - Query the cpuid for presense of windows hypervisor
+ * - Query the cpuid for presence of windows hypervisor
  */
 static int query_hypervisor_presence(void)
 {
diff --git a/drivers/staging/hv/hv_api.h b/drivers/staging/hv/hv_api.h
index 7114fceab21..43a722888dc 100644
--- a/drivers/staging/hv/hv_api.h
+++ b/drivers/staging/hv/hv_api.h
@@ -53,14 +53,14 @@ struct hv_guid {
 
 /*
  * HV_STATUS_INVALID_ALIGNMENT
- * The hypervisor could not perform the operation beacuse a parameter has an
+ * The hypervisor could not perform the operation because a parameter has an
  * invalid alignment.
  */
 #define HV_STATUS_INVALID_ALIGNMENT			((u16)0x0004)
 
 /*
  * HV_STATUS_INVALID_PARAMETER
- * The hypervisor could not perform the operation beacuse an invalid parameter
+ * The hypervisor could not perform the operation because an invalid parameter
  * was specified.
  */
 #define HV_STATUS_INVALID_PARAMETER			((u16)0x0005)
diff --git a/drivers/staging/hv/hv_kvp.h b/drivers/staging/hv/hv_kvp.h
index e069f59b513..8c402f357d3 100644
--- a/drivers/staging/hv/hv_kvp.h
+++ b/drivers/staging/hv/hv_kvp.h
@@ -36,7 +36,7 @@
  * registry.
  *
  * Note:  This value is used in defining the KVP exchange message - this value
- * cannot be modified without affecting the message size and compatability.
+ * cannot be modified without affecting the message size and compatibility.
  */
 
 /*
diff --git a/drivers/staging/hv/hv_mouse.c b/drivers/staging/hv/hv_mouse.c
index 50147f84741..118c7be2256 100644
--- a/drivers/staging/hv/hv_mouse.c
+++ b/drivers/staging/hv/hv_mouse.c
@@ -14,6 +14,7 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/workqueue.h>
 #include <linux/sched.h>
@@ -23,6 +24,7 @@
 #include <linux/hiddev.h>
 #include <linux/pci.h>
 #include <linux/dmi.h>
+#include <linux/delay.h>
 
 #include "hv_api.h"
 #include "logging.h"
@@ -374,7 +376,7 @@ static void MousevscOnReceiveDeviceInfo(struct mousevsc_dev *InputDevice, struct
 	       desc->desc[0].wDescriptorLength);
 
 	/* Send the ack */
-	memset(&ack, sizeof(struct mousevsc_prt_msg), 0);
+	memset(&ack, 0, sizeof(struct mousevsc_prt_msg));
 
 	ack.type = PipeMessageData;
 	ack.size = sizeof(struct synthhid_device_info_ack);
@@ -595,7 +597,7 @@ static int MousevscConnectToVsp(struct hv_device *Device)
 	/*
 	 * Now, initiate the vsc/vsp initialization protocol on the open channel
 	 */
-	memset(request, sizeof(struct mousevsc_prt_msg), 0);
+	memset(request, 0, sizeof(struct mousevsc_prt_msg));
 
 	request->type = PipeMessageData;
 	request->size = sizeof(struct synthhid_protocol_request);
diff --git a/drivers/staging/hv/hv_util.c b/drivers/staging/hv/hv_util.c
index 4792f2c402b..2df15683f8f 100644
--- a/drivers/staging/hv/hv_util.c
+++ b/drivers/staging/hv/hv_util.c
@@ -80,7 +80,7 @@ static void shutdown_onchannelcallback(void *context)
 				execute_shutdown = true;
 
 				DPRINT_INFO(VMBUS, "Shutdown request received -"
-					    " gracefull shutdown initiated");
+					    " graceful shutdown initiated");
 				break;
 			default:
 				icmsghdrp->status = HV_E_FAIL;
diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c
index 2d40f5f86b2..aaa81883f0a 100644
--- a/drivers/staging/hv/netvsc_drv.c
+++ b/drivers/staging/hv/netvsc_drv.c
@@ -46,6 +46,7 @@ struct net_device_context {
 	/* point back to our device context */
 	struct hv_device *device_ctx;
 	unsigned long avail;
+	struct work_struct work;
 };
 
 
@@ -219,6 +220,7 @@ static void netvsc_linkstatus_callback(struct hv_device *device_obj,
 				       unsigned int status)
 {
 	struct net_device *net = dev_get_drvdata(&device_obj->device);
+	struct net_device_context *ndev_ctx;
 
 	if (!net) {
 		DPRINT_ERR(NETVSC_DRV, "got link status but net device "
@@ -230,6 +232,8 @@ static void netvsc_linkstatus_callback(struct hv_device *device_obj,
 		netif_carrier_on(net);
 		netif_wake_queue(net);
 		netif_notify_peers(net);
+		ndev_ctx = netdev_priv(net);
+		schedule_work(&ndev_ctx->work);
 	} else {
 		netif_carrier_off(net);
 		netif_stop_queue(net);
@@ -313,8 +317,6 @@ static void netvsc_get_drvinfo(struct net_device *net,
 
 static const struct ethtool_ops ethtool_ops = {
 	.get_drvinfo	= netvsc_get_drvinfo,
-	.get_sg		= ethtool_op_get_sg,
-	.set_sg		= ethtool_op_set_sg,
 	.get_link	= ethtool_op_get_link,
 };
 
@@ -328,6 +330,25 @@ static const struct net_device_ops device_ops = {
 	.ndo_set_mac_address =		eth_mac_addr,
 };
 
+/*
+ * Send GARP packet to network peers after migrations.
+ * After Quick Migration, the network is not immediately operational in the
+ * current context when receiving RNDIS_STATUS_MEDIA_CONNECT event. So, add
+ * another netif_notify_peers() into a scheduled work, otherwise GARP packet
+ * will not be sent after quick migration, and cause network disconnection.
+ */
+static void netvsc_send_garp(struct work_struct *w)
+{
+	struct net_device_context *ndev_ctx;
+	struct net_device *net;
+
+	msleep(20);
+	ndev_ctx = container_of(w, struct net_device_context, work);
+	net = dev_get_drvdata(&ndev_ctx->device_ctx->device);
+	netif_notify_peers(net);
+}
+
+
 static int netvsc_probe(struct device *device)
 {
 	struct hv_driver *drv =
@@ -353,6 +374,7 @@ static int netvsc_probe(struct device *device)
 	net_device_ctx->device_ctx = device_obj;
 	net_device_ctx->avail = ring_size;
 	dev_set_drvdata(device, net);
+	INIT_WORK(&net_device_ctx->work, netvsc_send_garp);
 
 	/* Notify the netvsc driver of the new device */
 	ret = net_drv_obj->base.dev_add(device_obj, &device_info);
@@ -382,6 +404,7 @@ static int netvsc_probe(struct device *device)
 	net->netdev_ops = &device_ops;
 
 	/* TODO: Add GSO and Checksum offload */
+	net->hw_features = NETIF_F_SG;
 	net->features = NETIF_F_SG;
 
 	SET_ETHTOOL_OPS(net, &ethtool_ops);
diff --git a/drivers/staging/hv/rndis_filter.c b/drivers/staging/hv/rndis_filter.c
index e7189cd324c..048376b2b67 100644
--- a/drivers/staging/hv/rndis_filter.c
+++ b/drivers/staging/hv/rndis_filter.c
@@ -585,7 +585,7 @@ static int rndis_filter_set_packet_filter(struct rndis_device *dev,
 		ret = -1;
 		DPRINT_ERR(NETVSC, "timeout before we got a set response...");
 		/*
-		 * We cant deallocate the request since we may still receive a
+		 * We can't deallocate the request since we may still receive a
 		 * send completion for it.
 		 */
 		goto Exit;
diff --git a/drivers/staging/hv/tools/hv_kvp_daemon.c b/drivers/staging/hv/tools/hv_kvp_daemon.c
index f5a2dd69461..33f0f1c8ad7 100644
--- a/drivers/staging/hv/tools/hv_kvp_daemon.c
+++ b/drivers/staging/hv/tools/hv_kvp_daemon.c
@@ -102,22 +102,22 @@ static char kvp_send_buffer[4096];
 static char kvp_recv_buffer[4096];
 static struct sockaddr_nl addr;
 
-static char os_name[100];
-static char os_major[50];
-static char os_minor[50];
-static char processor_arch[50];
-static char os_build[100];
+static char *os_name = "";
+static char *os_major = "";
+static char *os_minor = "";
+static char *processor_arch;
+static char *os_build;
 static char *lic_version;
+static struct utsname uts_buf;
 
 void kvp_get_os_info(void)
 {
 	FILE	*file;
-	char	*eol;
-	struct utsname buf;
+	char	*p, buf[512];
 
-	uname(&buf);
-	strcpy(os_build, buf.release);
-	strcpy(processor_arch, buf.machine);
+	uname(&uts_buf);
+	os_build = uts_buf.release;
+	processor_arch= uts_buf.machine;
 
 	file = fopen("/etc/SuSE-release", "r");
 	if (file != NULL)
@@ -132,21 +132,46 @@ void kvp_get_os_info(void)
 	/*
 	 * We don't have information about the os.
 	 */
-	strcpy(os_name, "Linux");
-	strcpy(os_major, "0");
-	strcpy(os_minor, "0");
+	os_name = uts_buf.sysname;
 	return;
 
 kvp_osinfo_found:
-	fgets(os_name, 99, file);
-	eol = index(os_name, '\n');
-	*eol = '\0';
-	fgets(os_major, 49, file);
-	eol = index(os_major, '\n');
-	*eol = '\0';
-	fgets(os_minor, 49, file);
-	eol = index(os_minor, '\n');
-	*eol = '\0';
+	/* up to three lines */
+	p = fgets(buf, sizeof(buf), file);
+	if (p) {
+		p = strchr(buf, '\n');
+		if (p)
+			*p = '\0';
+		p = strdup(buf);
+		if (!p)
+			goto done;
+		os_name = p;
+
+		/* second line */
+		p = fgets(buf, sizeof(buf), file);
+		if (p) {
+			p = strchr(buf, '\n');
+			if (p)
+				*p = '\0';
+			p = strdup(buf);
+			if (!p)
+				goto done;
+			os_major = p;
+
+			/* third line */
+			p = fgets(buf, sizeof(buf), file);
+			if (p)  {
+				p = strchr(buf, '\n');
+				if (p)
+					*p = '\0';
+				p = strdup(buf);
+				if (p)
+					os_minor = p;
+			}
+		}
+	}
+
+done:
 	fclose(file);
 	return;
 }
@@ -202,7 +227,7 @@ kvp_get_ip_address(int family, char *buffer, int length)
 
 			/*
 			 * We only support AF_INET and AF_INET6
-			 * and the list of addresses is seperated by a ";".
+			 * and the list of addresses is separated by a ";".
 			 */
 				struct sockaddr_in6 *addr =
 				(struct sockaddr_in6 *) curp->ifa_addr;
@@ -293,7 +318,7 @@ netlink_send(int fd, struct cn_msg *msg)
 	return sendmsg(fd, &message, 0);
 }
 
-main(void)
+int main(void)
 {
 	int fd, len, sock_opt;
 	int error;
@@ -301,9 +326,10 @@ main(void)
 	struct pollfd pfd;
 	struct nlmsghdr *incoming_msg;
 	struct cn_msg	*incoming_cn_msg;
+	struct hv_ku_msg *hv_msg;
+	char	*p;
 	char	*key_value;
 	char	*key_name;
-	int	 key_index;
 
 	daemon(1, 0);
 	openlog("KVP", 0, LOG_USER);
@@ -373,9 +399,10 @@ main(void)
 			 * Driver is registering with us; stash away the version
 			 * information.
 			 */
-			lic_version = malloc(strlen(incoming_cn_msg->data) + 1);
+			p = (char *)incoming_cn_msg->data;
+			lic_version = malloc(strlen(p) + 1);
 			if (lic_version) {
-				strcpy(lic_version, incoming_cn_msg->data);
+				strcpy(lic_version, p);
 				syslog(LOG_INFO, "KVP LIC Version: %s",
 					lic_version);
 			} else {
@@ -389,14 +416,11 @@ main(void)
 			continue;
 		}
 
-		key_index =
-		((struct hv_ku_msg *)incoming_cn_msg->data)->kvp_index;
-		key_name =
-		((struct hv_ku_msg *)incoming_cn_msg->data)->kvp_key;
-		key_value =
-		((struct hv_ku_msg *)incoming_cn_msg->data)->kvp_value;
+		hv_msg = (struct hv_ku_msg *)incoming_cn_msg->data;
+		key_name = (char *)hv_msg->kvp_key;
+		key_value = (char *)hv_msg->kvp_value;
 
-		switch (key_index) {
+		switch (hv_msg->kvp_index) {
 		case FullyQualifiedDomainName:
 			kvp_get_domain_name(key_value,
 					HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c
index b473f468dd8..79089f85d90 100644
--- a/drivers/staging/hv/vmbus_drv.c
+++ b/drivers/staging/hv/vmbus_drv.c
@@ -254,7 +254,7 @@ static int vmbus_on_isr(void)
 	event = (union hv_synic_event_flags *)page_addr + VMBUS_MESSAGE_SINT;
 
 	/* Since we are a child, we only need to check bit 0 */
-	if (test_and_clear_bit(0, (unsigned long *) &event->flags32[0])) {
+	if (sync_test_and_clear_bit(0, (unsigned long *) &event->flags32[0])) {
 		DPRINT_DBG(VMBUS, "received event %d", event->flags32[0]);
 		ret |= 0x2;
 	}
diff --git a/drivers/staging/hv/vmbus_private.h b/drivers/staging/hv/vmbus_private.h
index ca050a499b9..6f0d8df5e17 100644
--- a/drivers/staging/hv/vmbus_private.h
+++ b/drivers/staging/hv/vmbus_private.h
@@ -31,6 +31,7 @@
 #include "channel_mgmt.h"
 #include "ring_buffer.h"
 #include <linux/list.h>
+#include <asm/sync_bitops.h>
 
 
 /*
diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/drivers/staging/iio/Documentation/iio_utils.h
index 8095727b396..fd78e4ff99a 100644
--- a/drivers/staging/iio/Documentation/iio_utils.h
+++ b/drivers/staging/iio/Documentation/iio_utils.h
@@ -556,7 +556,7 @@ int _write_sysfs_string(char *filename, char *basedir, char *val, int verify)
 		if (strcmp(temp, val) != 0) {
 			printf("Possible failure in string write of %s "
 				"Should be %s "
-				"writen to %s\%s\n",
+				"written to %s\%s\n",
 				temp,
 				val,
 				basedir,
diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
index c9bf22c1342..23fe54d09d1 100644
--- a/drivers/staging/iio/accel/adis16201.h
+++ b/drivers/staging/iio/accel/adis16201.h
@@ -70,7 +70,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16201_state {
diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index b39323eac9e..b88688128d6 100644
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -65,7 +65,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16203_state {
diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h
index e9ed7cb048c..e61844684f9 100644
--- a/drivers/staging/iio/accel/adis16204.h
+++ b/drivers/staging/iio/accel/adis16204.h
@@ -73,7 +73,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16204_state {
diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
index 4e97596620e..8b0da134955 100644
--- a/drivers/staging/iio/accel/adis16209.h
+++ b/drivers/staging/iio/accel/adis16209.h
@@ -109,7 +109,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16209_state {
diff --git a/drivers/staging/iio/accel/adis16220.h b/drivers/staging/iio/accel/adis16220.h
index 7013314a9d7..4d5758c2c04 100644
--- a/drivers/staging/iio/accel/adis16220.h
+++ b/drivers/staging/iio/accel/adis16220.h
@@ -132,7 +132,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16220_state {
diff --git a/drivers/staging/iio/accel/adis16240.h b/drivers/staging/iio/accel/adis16240.h
index 51a807dde27..76a45797b9d 100644
--- a/drivers/staging/iio/accel/adis16240.h
+++ b/drivers/staging/iio/accel/adis16240.h
@@ -132,7 +132,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16240_state {
diff --git a/drivers/staging/iio/accel/lis3l02dq.h b/drivers/staging/iio/accel/lis3l02dq.h
index 579b3a26e5d..11402187f9a 100644
--- a/drivers/staging/iio/accel/lis3l02dq.h
+++ b/drivers/staging/iio/accel/lis3l02dq.h
@@ -57,7 +57,7 @@
 /* Reboot memory content */
 #define LIS3L02DQ_REG_CTRL_2_REBOOT_MEMORY	0x10
 
-/* Interupt Enable - applies data ready to the RDY pad */
+/* Interrupt Enable - applies data ready to the RDY pad */
 #define LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT	0x08
 
 /* Enable Data Ready Generation - relationship with previous unclear in docs */
@@ -70,34 +70,34 @@
  * - option for 16 bit left justified */
 #define LIS3L02DQ_REG_CTRL_2_DATA_ALIGNMENT_16_BIT_LEFT_JUSTIFIED	0x01
 
-/* Interupt related stuff */
+/* Interrupt related stuff */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_ADDR			0x23
 
 /* Switch from or combination fo conditions to and */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_BOOLEAN_AND		0x80
 
-/* Latch interupt request,
+/* Latch interrupt request,
  * if on ack must be given by reading the ack register */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_LATCH_SRC		0x40
 
-/* Z Interupt on High (above threshold)*/
+/* Z Interrupt on High (above threshold)*/
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_HIGH	0x20
-/* Z Interupt on Low */
+/* Z Interrupt on Low */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_LOW	0x10
-/* Y Interupt on High */
+/* Y Interrupt on High */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_HIGH	0x08
-/* Y Interupt on Low */
+/* Y Interrupt on Low */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_LOW	0x04
-/* X Interupt on High */
+/* X Interrupt on High */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_HIGH	0x02
-/* X Interupt on Low */
+/* X Interrupt on Low */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW 0x01
 
-/* Register that gives description of what caused interupt
+/* Register that gives description of what caused interrupt
  * - latched if set in CFG_ADDRES */
 #define LIS3L02DQ_REG_WAKE_UP_SRC_ADDR			0x24
 /* top bit ignored */
-/* Interupt Active */
+/* Interrupt Active */
 #define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_ACTIVATED	0x40
 /* Interupts that have been triggered */
 #define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_HIGH	0x20
@@ -123,7 +123,7 @@
 #define LIS3L02DQ_REG_STATUS_X_NEW_DATA			0x01
 
 /* The accelerometer readings - low and high bytes.
-Form of high byte dependant on justification set in ctrl reg */
+Form of high byte dependent on justification set in ctrl reg */
 #define LIS3L02DQ_REG_OUT_X_L_ADDR			0x28
 #define LIS3L02DQ_REG_OUT_X_H_ADDR			0x29
 #define LIS3L02DQ_REG_OUT_Y_L_ADDR			0x2A
@@ -155,7 +155,7 @@ Form of high byte dependant on justification set in ctrl reg */
  * @inter:		used to check if new interrupt has been triggered
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct lis3l02dq_state {
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index c4b4ab7e642..3067f9662d2 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -77,7 +77,7 @@ int lis3l02dq_spi_read_reg_8(struct device *dev, u8 reg_address, u8 *val)
 /**
  * lis3l02dq_spi_write_reg_8() - write single byte to a register
  * @dev: device associated with child of actual device (iio_dev or iio_trig)
- * @reg_address: the address of the register to be writen
+ * @reg_address: the address of the register to be written
  * @val: the value to write
  **/
 int lis3l02dq_spi_write_reg_8(struct device *dev,
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 2c461a31f12..529a3cc6d0c 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -217,7 +217,7 @@ static const u8 read_all_tx_array[] = {
 /**
  * lis3l02dq_read_all() Reads all channels currently selected
  * @st:		device specific state
- * @rx_array:	(dma capable) recieve array, must be at least
+ * @rx_array:	(dma capable) receive array, must be at least
  *		4*number of channels
  **/
 static int lis3l02dq_read_all(struct lis3l02dq_state *st, u8 *rx_array)
@@ -409,7 +409,7 @@ static const struct attribute_group lis3l02dq_trigger_attr_group = {
  *
  * As the trigger may occur on any data element being updated it is
  * really rather likely to occur during the read from the previous
- * trigger event.  The only way to discover if this has occured on
+ * trigger event.  The only way to discover if this has occurred on
  * boards not supporting level interrupts is to take a look at the line.
  * If it is indicating another interrupt and we don't seem to have a
  * handler looking at it, then we need to notify the core that we need
diff --git a/drivers/staging/iio/accel/sca3000.h b/drivers/staging/iio/accel/sca3000.h
index 23892848f5a..db710334b99 100644
--- a/drivers/staging/iio/accel/sca3000.h
+++ b/drivers/staging/iio/accel/sca3000.h
@@ -185,7 +185,7 @@ struct sca3000_state {
 };
 
 /**
- * struct sca3000_chip_info - model dependant parameters
+ * struct sca3000_chip_info - model dependent parameters
  * @name: 			model identification
  * @scale:			string containing floating point scale factor
  * @temp_output:		some devices have temperature sensors.
@@ -213,7 +213,7 @@ struct sca3000_chip_info {
  * sca3000_read_data() read a series of values from the device
  * @dev:		device
  * @reg_address_high:	start address (decremented read)
- * @rx:			pointer where recieved data is placed. Callee
+ * @rx:			pointer where received data is placed. Callee
  *			responsible for freeing this.
  * @len:		number of bytes to read
  *
diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c
index c872fddfb2b..a730a7638de 100644
--- a/drivers/staging/iio/accel/sca3000_ring.c
+++ b/drivers/staging/iio/accel/sca3000_ring.c
@@ -43,7 +43,7 @@
  *			leading byte used in bus comms.
  *
  * Currently does not provide timestamps.  As the hardware doesn't add them they
- * can only be inferred aproximately from ring buffer events such as 50% full
+ * can only be inferred approximately from ring buffer events such as 50% full
  * and knowledge of when buffer was last emptied.  This is left to userspace.
  **/
 static int sca3000_rip_hw_rb(struct iio_ring_buffer *r,
diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c
index 19d1aced1e6..9068d7f54d1 100644
--- a/drivers/staging/iio/adc/ad7298_ring.c
+++ b/drivers/staging/iio/adc/ad7298_ring.c
@@ -157,7 +157,7 @@ static int ad7298_ring_preenable(struct iio_dev *indio_dev)
 /**
  * ad7298_poll_func_th() th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on spi comms occuring, leave timestamping until
+ * As sampling only occurs on spi comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/adc/ad7476_ring.c b/drivers/staging/iio/adc/ad7476_ring.c
index 1d654c86099..92d93787d5b 100644
--- a/drivers/staging/iio/adc/ad7476_ring.c
+++ b/drivers/staging/iio/adc/ad7476_ring.c
@@ -112,7 +112,7 @@ static int ad7476_ring_preenable(struct iio_dev *indio_dev)
 /**
  * ad7476_poll_func_th() th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on i2c comms occuring, leave timestamping until
+ * As sampling only occurs on i2c comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/adc/ad7887_ring.c b/drivers/staging/iio/adc/ad7887_ring.c
index 2d7fe65049d..da77f266c16 100644
--- a/drivers/staging/iio/adc/ad7887_ring.c
+++ b/drivers/staging/iio/adc/ad7887_ring.c
@@ -165,7 +165,7 @@ static int ad7887_ring_postdisable(struct iio_dev *indio_dev)
 /**
  * ad7887_poll_func_th() th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on spi comms occuring, leave timestamping until
+ * As sampling only occurs on spi comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
index e50841b3ac6..f04e642e727 100644
--- a/drivers/staging/iio/adc/ad799x_core.c
+++ b/drivers/staging/iio/adc/ad799x_core.c
@@ -184,7 +184,7 @@ static ssize_t ad799x_read_single_channel(struct device *dev,
 
 	mutex_lock(&dev_info->mlock);
 	mask = 1 << this_attr->address;
-	/* If ring buffer capture is occuring, query the buffer */
+	/* If ring buffer capture is occurring, query the buffer */
 	if (iio_ring_enabled(dev_info)) {
 		data = ret = ad799x_single_channel_from_ring(st, mask);
 		if (ret < 0)
diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
index 56abc395f17..0875a7ef67a 100644
--- a/drivers/staging/iio/adc/ad799x_ring.c
+++ b/drivers/staging/iio/adc/ad799x_ring.c
@@ -101,7 +101,7 @@ static int ad799x_ring_preenable(struct iio_dev *indio_dev)
 /**
  * ad799x_poll_func_th() th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on i2c comms occuring, leave timestamping until
+ * As sampling only occurs on i2c comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c
index dde097afb43..de83c3b37a2 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/staging/iio/adc/max1363_core.c
@@ -255,7 +255,7 @@ static ssize_t max1363_read_single_channel(struct device *dev,
 		goto error_ret;
 	}
 
-	/* If ring buffer capture is occuring, query the buffer */
+	/* If ring buffer capture is occurring, query the buffer */
 	if (iio_ring_enabled(dev_info)) {
 		mask = max1363_mode_table[this_attr->address].modemask;
 		data = max1363_single_channel_from_ring(mask, st);
@@ -1425,7 +1425,7 @@ error_ret:
 }
 
 /*
- * To keep this managable we always use one of 3 scan modes.
+ * To keep this manageable we always use one of 3 scan modes.
  * Scan 0...3, 0-1,2-3 and 1-0,3-2
  */
 static inline int __max1363_check_event_mask(int thismask, int checkmask)
diff --git a/drivers/staging/iio/adc/max1363_ring.c b/drivers/staging/iio/adc/max1363_ring.c
index 5532f3e466b..d36fcc62e97 100644
--- a/drivers/staging/iio/adc/max1363_ring.c
+++ b/drivers/staging/iio/adc/max1363_ring.c
@@ -108,7 +108,7 @@ static int max1363_ring_preenable(struct iio_dev *indio_dev)
 /**
  * max1363_poll_func_th() - th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on i2c comms occuring, leave timestamping until
+ * As sampling only occurs on i2c comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/chrdev.h b/drivers/staging/iio/chrdev.h
index 98d1a2c12df..4fcb99c816f 100644
--- a/drivers/staging/iio/chrdev.h
+++ b/drivers/staging/iio/chrdev.h
@@ -33,7 +33,7 @@ struct iio_handler {
 /**
  * struct iio_event_data - The actual event being pushed to userspace
  * @id:		event identifier
- * @timestamp:	best estimate of time of event occurance (often from
+ * @timestamp:	best estimate of time of event occurrence (often from
  *		the interrupt handler)
  */
 struct iio_event_data {
@@ -42,7 +42,7 @@ struct iio_event_data {
 };
 
 /**
- * struct iio_detected_event_list - list element for events that have occured
+ * struct iio_detected_event_list - list element for events that have occurred
  * @list:		linked list header
  * @ev:			the event itself
  * @shared_pointer:	used when the event is shared - i.e. can be escallated
@@ -98,7 +98,7 @@ struct iio_event_interface {
  * @list:		list header
  * @refcount:		as the handler may be shared between multiple device
  *			side events, reference counting ensures clean removal
- * @exist_lock:		prevents race conditions related to refcount useage.
+ * @exist_lock:		prevents race conditions related to refcount usage.
  * @handler:		event handler function - called on event if this
  *			event_handler is enabled.
  *
diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
index 700eb3980f9..ae53e71d1c2 100644
--- a/drivers/staging/iio/gyro/adis16060_core.c
+++ b/drivers/staging/iio/gyro/adis16060_core.c
@@ -30,7 +30,7 @@
  * @us_w:		actual spi_device to write config
  * @us_r:		actual spi_device to read back data
  * @indio_dev:		industrial I/O device structure
- * @buf:		transmit or recieve buffer
+ * @buf:		transmit or receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16060_state {
diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c
index fb4336c7d2a..ef9e304a226 100644
--- a/drivers/staging/iio/gyro/adis16080_core.c
+++ b/drivers/staging/iio/gyro/adis16080_core.c
@@ -35,7 +35,7 @@
  * struct adis16080_state - device instance specific data
  * @us:			actual spi_device to write data
  * @indio_dev:		industrial I/O device structure
- * @buf:		transmit or recieve buffer
+ * @buf:		transmit or receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16080_state {
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h
index c1fd4364287..1369501b409 100644
--- a/drivers/staging/iio/gyro/adis16260.h
+++ b/drivers/staging/iio/gyro/adis16260.h
@@ -91,7 +91,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  * @negate:		negate the scale parameter
  **/
diff --git a/drivers/staging/iio/iio.h b/drivers/staging/iio/iio.h
index 248bdd2846f..7127f26f8d2 100644
--- a/drivers/staging/iio/iio.h
+++ b/drivers/staging/iio/iio.h
@@ -92,7 +92,7 @@ void iio_remove_event_from_list(struct iio_event_handler_list *el,
  *			changes
  * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
  * @trig:		[INTERN] current device trigger (ring buffer modes)
- * @pollfunc:		[DRIVER] function run on trigger being recieved
+ * @pollfunc:		[DRIVER] function run on trigger being received
  **/
 struct iio_dev {
 	int				id;
diff --git a/drivers/staging/iio/imu/adis16300.h b/drivers/staging/iio/imu/adis16300.h
index 1f25d68064a..c0957591aed 100644
--- a/drivers/staging/iio/imu/adis16300.h
+++ b/drivers/staging/iio/imu/adis16300.h
@@ -99,7 +99,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16300_state {
diff --git a/drivers/staging/iio/imu/adis16350.h b/drivers/staging/iio/imu/adis16350.h
index b00001e3edd..b1ad48662a2 100644
--- a/drivers/staging/iio/imu/adis16350.h
+++ b/drivers/staging/iio/imu/adis16350.h
@@ -105,7 +105,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16350_state {
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index 6ff33e1ad8c..e328bcc5922 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -17,7 +17,8 @@
 #ifndef SPI_ADIS16400_H_
 #define SPI_ADIS16400_H_
 
-#define ADIS16400_STARTUP_DELAY	220 /* ms */
+#define ADIS16400_STARTUP_DELAY	290 /* ms */
+#define ADIS16400_MTEST_DELAY 90 /* ms */
 
 #define ADIS16400_READ_REG(a)    a
 #define ADIS16400_WRITE_REG(a) ((a) | 0x80)
@@ -131,7 +132,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct adis16400_state {
diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
index cfb108a1545..540bde69cc3 100644
--- a/drivers/staging/iio/imu/adis16400_core.c
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -6,6 +6,7 @@
  *
  * Copyright (c) 2009 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
  * Copyright (c) 2007 Jonathan Cameron <jic23@cam.ac.uk>
+ * Copyright (c) 2011 Analog Devices Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -93,7 +94,6 @@ static int adis16400_spi_write_reg_16(struct device *dev,
 			.tx_buf = st->tx + 2,
 			.bits_per_word = 8,
 			.len = 2,
-			.cs_change = 1,
 		},
 	};
 
@@ -137,7 +137,6 @@ static int adis16400_spi_read_reg_16(struct device *dev,
 			.rx_buf = st->rx,
 			.bits_per_word = 8,
 			.len = 2,
-			.cs_change = 1,
 		},
 	};
 
@@ -375,7 +374,7 @@ static int adis16400_self_test(struct device *dev)
 		dev_err(dev, "problem starting self test");
 		goto err_ret;
 	}
-
+	msleep(ADIS16400_MTEST_DELAY);
 	adis16400_check_status(dev);
 
 err_ret:
@@ -471,10 +470,11 @@ static int adis16400_initial_setup(struct adis16400_state *st)
 	if (ret)
 		goto err_ret;
 
-	if (prod_id != ADIS16400_PRODUCT_ID_DEFAULT)
+	if ((prod_id & 0xF000) != ADIS16400_PRODUCT_ID_DEFAULT)
 		dev_warn(dev, "unknown product id");
 
-	printk(KERN_INFO DRIVER_NAME ": prod_id 0x%04x at CS%d (irq %d)\n",
+
+	dev_info(dev, ": prod_id 0x%04x at CS%d (irq %d)\n",
 			prod_id, st->us->chip_select, st->us->irq);
 
 	/* use high spi speed if possible */
@@ -497,12 +497,12 @@ err_ret:
 			_reg)
 
 static ADIS16400_DEV_ATTR_CALIBBIAS(GYRO_X, ADIS16400_XGYRO_OFF);
-static ADIS16400_DEV_ATTR_CALIBBIAS(GYRO_Y, ADIS16400_XGYRO_OFF);
-static ADIS16400_DEV_ATTR_CALIBBIAS(GYRO_Z, ADIS16400_XGYRO_OFF);
+static ADIS16400_DEV_ATTR_CALIBBIAS(GYRO_Y, ADIS16400_YGYRO_OFF);
+static ADIS16400_DEV_ATTR_CALIBBIAS(GYRO_Z, ADIS16400_ZGYRO_OFF);
 
 static ADIS16400_DEV_ATTR_CALIBBIAS(ACCEL_X, ADIS16400_XACCL_OFF);
-static ADIS16400_DEV_ATTR_CALIBBIAS(ACCEL_Y, ADIS16400_XACCL_OFF);
-static ADIS16400_DEV_ATTR_CALIBBIAS(ACCEL_Z, ADIS16400_XACCL_OFF);
+static ADIS16400_DEV_ATTR_CALIBBIAS(ACCEL_Y, ADIS16400_YACCL_OFF);
+static ADIS16400_DEV_ATTR_CALIBBIAS(ACCEL_Z, ADIS16400_ZACCL_OFF);
 
 
 static IIO_DEV_ATTR_IN_NAMED_RAW(0, supply, adis16400_read_14bit_signed,
@@ -647,7 +647,7 @@ static int __devinit adis16400_probe(struct spi_device *spi)
 
 	ret = iio_ring_buffer_register(st->indio_dev->ring, 0);
 	if (ret) {
-		printk(KERN_ERR "failed to initialize the ring\n");
+		dev_err(&spi->dev, "failed to initialize the ring\n");
 		goto error_unreg_ring_funcs;
 	}
 
diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c
index 33293fba9bc..da28cb4288a 100644
--- a/drivers/staging/iio/imu/adis16400_ring.c
+++ b/drivers/staging/iio/imu/adis16400_ring.c
@@ -122,12 +122,10 @@ static int adis16400_spi_read_burst(struct device *dev, u8 *rx)
 			.tx_buf = st->tx,
 			.bits_per_word = 8,
 			.len = 2,
-			.cs_change = 0,
 		}, {
 			.rx_buf = rx,
 			.bits_per_word = 8,
 			.len = 24,
-			.cs_change = 1,
 		},
 	};
 
@@ -162,9 +160,10 @@ static void adis16400_trigger_bh_to_ring(struct work_struct *work_s)
 			       work_trigger_to_ring);
 	struct iio_ring_buffer *ring = st->indio_dev->ring;
 
-	int i = 0;
+	int i = 0, j;
 	s16 *data;
 	size_t datasize = ring->access.get_bytes_per_datum(ring);
+	unsigned long mask = ring->scan_mask;
 
 	data = kmalloc(datasize , GFP_KERNEL);
 	if (data == NULL) {
@@ -174,9 +173,12 @@ static void adis16400_trigger_bh_to_ring(struct work_struct *work_s)
 
 	if (ring->scan_count)
 		if (adis16400_spi_read_burst(&st->indio_dev->dev, st->rx) >= 0)
-			for (; i < ring->scan_count; i++)
+			for (; i < ring->scan_count; i++) {
+				j = __ffs(mask);
+				mask &= ~(1 << j);
 				data[i]	= be16_to_cpup(
-					(__be16 *)&(st->rx[i*2]));
+					(__be16 *)&(st->rx[j*2]));
+			}
 
 	/* Guaranteed to be aligned with 8 byte boundary */
 	if (ring->scan_timestamp)
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
index f3bf111f354..1795ee1e820 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@@ -258,7 +258,7 @@ static ssize_t iio_event_chrdev_read(struct file *filep,
 							   ->det_events.list));
 		if (ret)
 			goto error_ret;
-		/* Single access device so noone else can get the data */
+		/* Single access device so no one else can get the data */
 		mutex_lock(&ev_int->event_list_lock);
 	}
 
diff --git a/drivers/staging/iio/meter/ade7753.h b/drivers/staging/iio/meter/ade7753.h
index 70dabae6efe..3b9c7f6a50e 100644
--- a/drivers/staging/iio/meter/ade7753.h
+++ b/drivers/staging/iio/meter/ade7753.h
@@ -62,7 +62,7 @@
  * @us:			actual spi_device
  * @indio_dev:		industrial I/O device structure
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct ade7753_state {
diff --git a/drivers/staging/iio/meter/ade7754.h b/drivers/staging/iio/meter/ade7754.h
index 8faa9b3b48b..0aa0522a33a 100644
--- a/drivers/staging/iio/meter/ade7754.h
+++ b/drivers/staging/iio/meter/ade7754.h
@@ -80,7 +80,7 @@
  * @us:			actual spi_device
  * @indio_dev:		industrial I/O device structure
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct ade7754_state {
diff --git a/drivers/staging/iio/meter/ade7758.h b/drivers/staging/iio/meter/ade7758.h
index df5bb7ba5a0..c6fd94f3b3e 100644
--- a/drivers/staging/iio/meter/ade7758.h
+++ b/drivers/staging/iio/meter/ade7758.h
@@ -98,7 +98,7 @@
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct ade7758_state {
diff --git a/drivers/staging/iio/meter/ade7759.h b/drivers/staging/iio/meter/ade7759.h
index e9d1c43336f..cc76c2c4c03 100644
--- a/drivers/staging/iio/meter/ade7759.h
+++ b/drivers/staging/iio/meter/ade7759.h
@@ -43,7 +43,7 @@
  * @us:			actual spi_device
  * @indio_dev:		industrial I/O device structure
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct ade7759_state {
diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h
index 4ad84a3bb46..79a21109f4e 100644
--- a/drivers/staging/iio/meter/ade7854.h
+++ b/drivers/staging/iio/meter/ade7854.h
@@ -149,7 +149,7 @@
  * @spi:			actual spi_device
  * @indio_dev:		industrial I/O device structure
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct ade7854_state {
diff --git a/drivers/staging/iio/ring_generic.h b/drivers/staging/iio/ring_generic.h
index f21ac09373c..32948e55dc8 100644
--- a/drivers/staging/iio/ring_generic.h
+++ b/drivers/staging/iio/ring_generic.h
@@ -30,7 +30,7 @@ int iio_push_ring_event(struct iio_ring_buffer *ring_buf,
  * @event_code:		event indentification code
  * @timestamp:		time of event
  *
- * Typical usecase is to escalate a 50% ring full to 75% full if noone has yet
+ * Typical usecase is to escalate a 50% ring full to 75% full if no one has yet
  * read the first event. Clearly the 50% full is no longer of interest in
  * typical use case.
  **/
diff --git a/drivers/staging/intel_sst/TODO b/drivers/staging/intel_sst/TODO
index a24e5ed5689..c733d701109 100644
--- a/drivers/staging/intel_sst/TODO
+++ b/drivers/staging/intel_sst/TODO
@@ -1,7 +1,7 @@
 TODO
 ----
 
-Get the memrar driver cleaned up and upstream (dependancy blocking SST)
+Get the memrar driver cleaned up and upstream (dependency blocking SST)
 Replace long/short press with two virtual buttons
 Review the printks and kill off any left over ST_ERR: messages
 Review the misc device ioctls for 32/64bit safety and sanity
diff --git a/drivers/staging/intel_sst/intel_sst.c b/drivers/staging/intel_sst/intel_sst.c
index ce4a9f79ccd..81c24d19eb9 100644
--- a/drivers/staging/intel_sst/intel_sst.c
+++ b/drivers/staging/intel_sst/intel_sst.c
@@ -263,7 +263,7 @@ static int __devinit intel_sst_probe(struct pci_dev *pci,
 	/* Init the device */
 	ret = pci_enable_device(pci);
 	if (ret) {
-		pr_err("device cant be enabled\n");
+		pr_err("device can't be enabled\n");
 		goto do_free_mem;
 	}
 	sst_drv_ctx->pci = pci_dev_get(pci);
@@ -453,7 +453,7 @@ int intel_sst_resume(struct pci_dev *pci)
 	pci_restore_state(pci);
 	ret = pci_enable_device(pci);
 	if (ret)
-		pr_err("device cant be enabled\n");
+		pr_err("device can't be enabled\n");
 
 	mutex_lock(&sst_drv_ctx->sst_lock);
 	sst_drv_ctx->sst_state = SST_UN_INIT;
diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index a367991d560..1d0621260ea 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -236,7 +236,7 @@ int intel_sst_mmap(struct file *file_ptr, struct vm_area_struct *vma)
 	if (!sst_drv_ctx->mmap_mem)
 		return -EIO;
 
-	/* round it up to the page bondary  */
+	/* round it up to the page boundary  */
 	/*mem_area = (void *)((((unsigned long)sst_drv_ctx->mmap_mem)
 				+ PAGE_SIZE - 1) & PAGE_MASK);*/
 	mem_area = (void *) PAGE_ALIGN((unsigned int) sst_drv_ctx->mmap_mem);
@@ -871,7 +871,7 @@ int sst_send_algo_ipc(struct ipc_post **msg)
 }
 
 /**
- * intel_sst_ioctl_dsp - recieves the device ioctl's
+ * intel_sst_ioctl_dsp - receives the device ioctl's
  *
  * @cmd:Ioctl cmd
  * @arg:data
@@ -1067,7 +1067,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			retval = -EFAULT;
 			break;
 		}
-		pr_debug("SET_VOLUME recieved for %d!\n",
+		pr_debug("SET_VOLUME received for %d!\n",
 				set_vol.stream_id);
 		if (minor == STREAM_MODULE && set_vol.stream_id == 0) {
 			pr_debug("invalid operation!\n");
@@ -1085,7 +1085,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			retval = -EFAULT;
 			break;
 		}
-		pr_debug("IOCTL_GET_VOLUME recieved for stream = %d!\n",
+		pr_debug("IOCTL_GET_VOLUME received for stream = %d!\n",
 				get_vol.stream_id);
 		if (minor == STREAM_MODULE && get_vol.stream_id == 0) {
 			pr_debug("invalid operation!\n");
@@ -1117,7 +1117,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			retval = -EFAULT;
 			break;
 		}
-		pr_debug("SNDRV_SST_SET_VOLUME recieved for %d!\n",
+		pr_debug("SNDRV_SST_SET_VOLUME received for %d!\n",
 			set_mute.stream_id);
 		if (minor == STREAM_MODULE && set_mute.stream_id == 0) {
 			retval = -EPERM;
@@ -1153,7 +1153,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	case _IOC_NR(SNDRV_SST_MMAP_CAPTURE): {
 		struct snd_sst_mmap_buffs mmap_buf;
 
-		pr_debug("SNDRV_SST_MMAP_PLAY/CAPTURE recieved!\n");
+		pr_debug("SNDRV_SST_MMAP_PLAY/CAPTURE received!\n");
 		if (minor != STREAM_MODULE) {
 			retval = -EBADRQC;
 			break;
@@ -1239,7 +1239,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	case _IOC_NR(SNDRV_SST_SET_TARGET_DEVICE): {
 		struct snd_sst_target_device target_device;
 
-		pr_debug("SET_TARGET_DEVICE recieved!\n");
+		pr_debug("SET_TARGET_DEVICE received!\n");
 		if (copy_from_user(&target_device, (void __user *)arg,
 				sizeof(target_device))) {
 			retval = -EFAULT;
@@ -1256,7 +1256,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	case _IOC_NR(SNDRV_SST_DRIVER_INFO): {
 		struct snd_sst_driver_info info;
 
-		pr_debug("SNDRV_SST_DRIVER_INFO recived\n");
+		pr_debug("SNDRV_SST_DRIVER_INFO received\n");
 		info.version = SST_VERSION_NUM;
 		/* hard coding, shud get sumhow later */
 		info.active_pcm_streams = sst_drv_ctx->stream_cnt -
diff --git a/drivers/staging/intel_sst/intel_sst_drv_interface.c b/drivers/staging/intel_sst/intel_sst_drv_interface.c
index ea8e251b509..e9c18210824 100644
--- a/drivers/staging/intel_sst/intel_sst_drv_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_drv_interface.c
@@ -315,7 +315,7 @@ int sst_open_pcm_stream(struct snd_sst_params *str_param)
 	pm_runtime_get_sync(&sst_drv_ctx->pci->dev);
 
 	if (sst_drv_ctx->sst_state == SST_SUSPENDED) {
-		/* LPE is suspended, resume it before proceding*/
+		/* LPE is suspended, resume it before proceeding*/
 		pr_debug("Resuming from Suspended state\n");
 		retval = intel_sst_resume(sst_drv_ctx->pci);
 		if (retval) {
diff --git a/drivers/staging/intel_sst/intel_sst_dsp.c b/drivers/staging/intel_sst/intel_sst_dsp.c
index 6e5c9152da9..bffe4c6e292 100644
--- a/drivers/staging/intel_sst/intel_sst_dsp.c
+++ b/drivers/staging/intel_sst/intel_sst_dsp.c
@@ -350,7 +350,7 @@ static int sst_download_library(const struct firmware *fw_lib,
 
 }
 
-/* This function is called befoer downloading the codec/postprocessing
+/* This function is called before downloading the codec/postprocessing
 library is set for download to SST DSP*/
 static int sst_validate_library(const struct firmware *fw_lib,
 		struct lib_slot_info *slot,
@@ -405,7 +405,7 @@ exit:
 
 }
 
-/* This function is called when FW requests for a particular libary download
+/* This function is called when FW requests for a particular library download
 This function prepares the library to download*/
 int sst_load_library(struct snd_sst_lib_download *lib, u8 ops)
 {
diff --git a/drivers/staging/intel_sst/intel_sst_fw_ipc.h b/drivers/staging/intel_sst/intel_sst_fw_ipc.h
index 8df313d10d2..0f0c5bbc5f4 100644
--- a/drivers/staging/intel_sst/intel_sst_fw_ipc.h
+++ b/drivers/staging/intel_sst/intel_sst_fw_ipc.h
@@ -111,7 +111,7 @@
 #define IPC_SST_PERIOD_ELAPSED 0x97 /* period elapsed */
 #define IPC_IA_TARGET_DEV_CHNGD 0x98 /* error in processing a stream */
 
-#define IPC_SST_ERROR_EVENT 0x99 /* Buffer over run occured */
+#define IPC_SST_ERROR_EVENT 0x99 /* Buffer over run occurred */
 /* L2S messages */
 #define IPC_SC_DDR_LINK_UP 0xC0
 #define IPC_SC_DDR_LINK_DOWN 0xC1
diff --git a/drivers/staging/intel_sst/intel_sst_stream.c b/drivers/staging/intel_sst/intel_sst_stream.c
index 795e42ab736..dd58be5b197 100644
--- a/drivers/staging/intel_sst/intel_sst_stream.c
+++ b/drivers/staging/intel_sst/intel_sst_stream.c
@@ -98,7 +98,7 @@ static unsigned int get_mrst_stream_id(void)
 		if (sst_drv_ctx->streams[i].status == STREAM_UN_INIT)
 			return i;
 	}
-	pr_debug("Didnt find empty stream for mrst\n");
+	pr_debug("Didn't find empty stream for mrst\n");
 	return -EBUSY;
 }
 
diff --git a/drivers/staging/intel_sst/intel_sst_stream_encoded.c b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
index 29753c7519a..d5f07b87882 100644
--- a/drivers/staging/intel_sst/intel_sst_stream_encoded.c
+++ b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
@@ -914,7 +914,7 @@ static int sst_prepare_input_buffers_rar(struct stream_info *str_info,
 		(void *) ((unsigned long) rar_buffers.bus_address);
 		pr_debug("RAR buf addr in DnR (input buffer function)0x%lu",
 				 (unsigned long) str_info->decode_ibuf);
-		pr_debug("rar in DnR decode funtion/output b_add rar =0x%lu",
+		pr_debug("rar in DnR decode function/output b_add rar =0x%lu",
 				(unsigned long) rar_buffers.bus_address);
 		*input_index = i + 1;
 		str_info->decode_isize = dbufs->ibufs->buff_entry[i].size;
diff --git a/drivers/staging/intel_sst/intelmid.c b/drivers/staging/intel_sst/intelmid.c
index fb229218670..d207636a7b6 100644
--- a/drivers/staging/intel_sst/intelmid.c
+++ b/drivers/staging/intel_sst/intelmid.c
@@ -773,7 +773,7 @@ static int __devinit snd_intelmad_sst_register(
 		if (ret_val)
 			return ret_val;
 		sst_card_vendor_id = (vendor_addr.value & (MASK2|MASK1|MASK0));
-		pr_debug("orginal n extrated vendor id = 0x%x %d\n",
+		pr_debug("original n extrated vendor id = 0x%x %d\n",
 				vendor_addr.value, sst_card_vendor_id);
 		if (sst_card_vendor_id < 0 || sst_card_vendor_id > 2) {
 			pr_err("vendor card not supported!!\n");
diff --git a/drivers/staging/intel_sst/intelmid.h b/drivers/staging/intel_sst/intelmid.h
index ca881b790cb..e77da87e1df 100644
--- a/drivers/staging/intel_sst/intelmid.h
+++ b/drivers/staging/intel_sst/intelmid.h
@@ -90,7 +90,7 @@ struct mad_jack_msg_wq {
  * @card_index: sound card index
  * @card_id: sound card id detected
  * @sstdrv_ops: ptr to sst driver ops
- * @pdev: ptr to platfrom device
+ * @pdev: ptr to platform device
  * @irq: interrupt number detected
  * @pmic_status: Device status of sound card
  * @int_base: ptr to MMIO interrupt region
diff --git a/drivers/staging/intel_sst/intelmid_v1_control.c b/drivers/staging/intel_sst/intelmid_v1_control.c
index 9cc15c1c18d..1ea81421805 100644
--- a/drivers/staging/intel_sst/intelmid_v1_control.c
+++ b/drivers/staging/intel_sst/intelmid_v1_control.c
@@ -28,6 +28,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/file.h>
 #include <asm/mrst.h>
 #include <sound/pcm.h>
diff --git a/drivers/staging/intel_sst/intelmid_v2_control.c b/drivers/staging/intel_sst/intelmid_v2_control.c
index 26d815a67eb..3c6b3abff3c 100644
--- a/drivers/staging/intel_sst/intelmid_v2_control.c
+++ b/drivers/staging/intel_sst/intelmid_v2_control.c
@@ -29,6 +29,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/file.h>
 #include "intel_sst.h"
 #include "intelmid_snd_control.h"
diff --git a/drivers/staging/keucr/init.c b/drivers/staging/keucr/init.c
index 5c01f28f073..8af7c84daee 100644
--- a/drivers/staging/keucr/init.c
+++ b/drivers/staging/keucr/init.c
@@ -90,7 +90,7 @@ int ENE_MSInit(struct us_data *us)
 
 	result = ENE_SendScsiCmd(us, FDIR_READ, &buf, 0);
 	if (result != USB_STOR_XFER_GOOD) {
-		printk(KERN_ERR "Exection MS Init Code Fail !!\n");
+		printk(KERN_ERR "Execution MS Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -145,7 +145,7 @@ int ENE_SMInit(struct us_data *us)
 	result = ENE_SendScsiCmd(us, FDIR_READ, &buf, 0);
 	if (result != USB_STOR_XFER_GOOD) {
 		printk(KERN_ERR
-		       "Exection SM Init Code Fail !! result = %x\n", result);
+		       "Execution SM Init Code Fail !! result = %x\n", result);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
diff --git a/drivers/staging/keucr/smilmain.c b/drivers/staging/keucr/smilmain.c
index 2cbe9f897ee..95c688a5c95 100644
--- a/drivers/staging/keucr/smilmain.c
+++ b/drivers/staging/keucr/smilmain.c
@@ -64,7 +64,7 @@ extern struct SSFDCTYPE  Ssfdc;
 extern struct ADDRESS    Media;
 extern struct CIS_AREA   CisArea;
 
-//BIT Controll Macro
+//BIT Control Macro
 BYTE BitData[] = { 0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80 } ;
 #define Set_D_Bit(a,b)    (a[(BYTE)((b)/8)]|= BitData[(b)%8])
 #define Clr_D_Bit(a,b)    (a[(BYTE)((b)/8)]&=~BitData[(b)%8])
@@ -76,7 +76,7 @@ extern BYTE     IsXDCompliance;
 
 
 //
-////Power Controll & Media Exist Check Function
+////Power Control & Media Exist Check Function
 ////----- Init_D_SmartMedia() --------------------------------------------
 //int Init_D_SmartMedia(void)
 //{
@@ -575,7 +575,7 @@ int Media_D_OneSectWriteFlush(PFDO_DEVICE_EXTENSION fdoExt)
 //    return(SUCCESS);
 //}
 //
-////Power Controll & Media Exist Check Subroutine
+////Power Control & Media Exist Check Subroutine
 ////----- Initialize_D_Media() -------------------------------------------
 //void Initialize_D_Media(void)
 //{
@@ -738,7 +738,7 @@ int Check_D_MediaFmt(struct us_data *us)
 //    return(SUCCESS);
 //}
 */
-//SmartMedia Physical Address Controll Subroutine
+//SmartMedia Physical Address Control Subroutine
 //----- Conv_D_MediaAddr() ---------------------------------------------
 int Conv_D_MediaAddr(struct us_data *us, DWORD addr)
 {
diff --git a/drivers/staging/keucr/smilsub.c b/drivers/staging/keucr/smilsub.c
index 80da61c37bf..4fe47422eb7 100644
--- a/drivers/staging/keucr/smilsub.c
+++ b/drivers/staging/keucr/smilsub.c
@@ -57,7 +57,7 @@ extern WORD  WriteBlock;
 #define ODD                     1             // Odd Page for 256byte/page
 
 
-//SmartMedia Redundant buffer data Controll Subroutine
+//SmartMedia Redundant buffer data Control Subroutine
 //----- Check_D_DataBlank() --------------------------------------------
 int Check_D_DataBlank(BYTE *redundant)
 {
@@ -1367,7 +1367,7 @@ BYTE _Check_D_DevCode(BYTE dcode)
     }
 }
 /*
-////SmartMedia Power Controll Subroutine
+////SmartMedia Power Control Subroutine
 ////----- Cnt_D_Reset() ----------------------------------------------
 //void Cnt_D_Reset(void)
 //{
@@ -1478,7 +1478,7 @@ BYTE _Check_D_DevCode(BYTE dcode)
 //}
 //
 */
-//SmartMedia ECC Controll Subroutine
+//SmartMedia ECC Control Subroutine
 //----- Check_D_ReadError() ----------------------------------------------
 int Check_D_ReadError(BYTE *redundant)
 {
diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/lirc/lirc_ene0100.h
index 776b693bb30..06bebd6acc4 100644
--- a/drivers/staging/lirc/lirc_ene0100.h
+++ b/drivers/staging/lirc/lirc_ene0100.h
@@ -81,7 +81,7 @@
 
 /* CIR block settings */
 #define ENE_CIR_CONF1		0xFEC0
-#define ENE_CIR_CONF1_ADC_ON	0x7	 /* reciever on gpio40 enabled */
+#define ENE_CIR_CONF1_ADC_ON	0x7	 /* receiver on gpio40 enabled */
 #define ENE_CIR_CONF1_LEARN1	(1 << 3) /* enabled on learning mode */
 #define ENE_CIR_CONF1_TX_ON	0x30	 /* enabled on transmit */
 #define ENE_CIR_CONF1_TX_CARR	(1 << 7) /* send TX carrier or not */
@@ -96,7 +96,7 @@
 
 /* transmitter - not implemented yet */
 /* KB3926C and higher */
-/* transmission is very similiar to recieving, a byte is written to */
+/* transmission is very similar to receiving, a byte is written to */
 /* ENE_TX_INPUT, in same manner as it is read from sample buffer */
 /* sample period is fixed*/
 
diff --git a/drivers/staging/memrar/Kconfig b/drivers/staging/memrar/Kconfig
deleted file mode 100644
index cbeebc55090..00000000000
--- a/drivers/staging/memrar/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config MRST_RAR_HANDLER
-	tristate "RAR handler driver for Intel Moorestown platform"
-	depends on RAR_REGISTER
-	---help---
-	  This driver provides a memory management interface to
-	  restricted access regions (RAR) available on the Intel
-	  Moorestown platform.
-
-	  Once locked down, restricted access regions are only
-	  accessible by specific hardware on the platform.  The x86
-	  CPU is typically not one of those platforms.  As such this
-	  driver does not access RAR, and only provides a buffer
-	  allocation/bookkeeping mechanism.
-
-	  If unsure, say N.
diff --git a/drivers/staging/memrar/Makefile b/drivers/staging/memrar/Makefile
deleted file mode 100644
index a3336c00cc5..00000000000
--- a/drivers/staging/memrar/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar.o
-memrar-y			:= memrar_allocator.o memrar_handler.o
diff --git a/drivers/staging/memrar/TODO b/drivers/staging/memrar/TODO
deleted file mode 100644
index 435e09ba44c..00000000000
--- a/drivers/staging/memrar/TODO
+++ /dev/null
@@ -1,43 +0,0 @@
-RAR Handler (memrar) Driver TODO Items
-======================================
-
-Maintainer: Eugene Epshteyn <eugene.epshteyn@intel.com>
-
-memrar.h
---------
-1. This header exposes the driver's user space and kernel space
-   interfaces.  It should be moved to <linux/rar/memrar.h>, or
-   something along those lines, when this memrar driver is moved out
-   of `staging'.
-     a. It would be ideal if staging/rar_register/rar_register.h was
-        moved to the same directory.
-
-memrar_allocator.[ch]
----------------------
-1. Address potential fragmentation issues with the memrar_allocator.
-
-2. Hide struct memrar_allocator details/fields.  They need not be
-   exposed to the user.
-     a. Forward declare struct memrar_allocator.
-     b. Move all three struct definitions to `memrar_allocator.c'
-        source file.
-     c. Add a memrar_allocator_largest_free_area() function, or
-        something like that to get access to the value of the struct
-        memrar_allocator "largest_free_area" field.  This allows the
-        struct memrar_allocator fields to be completely hidden from
-        the user.  The memrar_handler code really only needs this for
-        statistic gathering on-demand.
-     d. Do the same for the "capacity" field as the
-        "largest_free_area" field.
-
-3. Move memrar_allocator.* to kernel `lib' directory since it is HW
-   neutral.
-     a. Alternatively, use lib/genalloc.c instead.
-     b. A kernel port of Doug Lea's malloc() implementation may also
-        be an option.
-
-memrar_handler.c
-----------------
-1. Split user space interface (ioctl code) from core/kernel code,
-   e.g.:
-     memrar_handler.c -> memrar_core.c, memrar_user.c
diff --git a/drivers/staging/memrar/memrar-abi b/drivers/staging/memrar/memrar-abi
deleted file mode 100644
index c23fc996a43..00000000000
--- a/drivers/staging/memrar/memrar-abi
+++ /dev/null
@@ -1,89 +0,0 @@
-What:		/dev/memrar
-Date:		March 2010
-KernelVersion:	2.6.34
-Contact:	Eugene Epshteyn <eugene.epshteyn@intel.com>
-Description:	The Intel Moorestown Restricted Access Region (RAR)
-		Handler driver exposes an ioctl() based interface that
-		allows a user to reserve and release blocks of RAR
-		memory.
-
-		Note:  A sysfs based one was not appropriate for the
-		RAR handler's usage model.
-
-		=========================================================
-				ioctl() Requests
-		=========================================================
-		RAR_HANDLER_RESERVE
-		-------------------
-		Description:	Reserve RAR block.
-		Type:		struct RAR_block_info
-		Direction:	in/out
-		Errors:		EINVAL (invalid RAR type or size)
-				ENOMEM (not enough RAR memory)
-
-		RAR_HANDLER_STAT
-		----------------
-		Description:	Get RAR statistics.
-		Type:		struct RAR_stat
-		Direction:	in/out
-		Errors:		EINVAL (invalid RAR type)
-
-		RAR_HANDLER_RELEASE
-		-------------------
-		Description:	Release previously reserved RAR block.
-		Type:		32 bit unsigned integer
-				(e.g. uint32_t), i.e the RAR "handle".
-		Direction:	in
-		Errors:		EINVAL (invalid RAR handle)
-
-
-		=========================================================
-			ioctl() Request Parameter Types
-		=========================================================
-		The structures referred to above are defined as
-		follows:
-
-		/**
-		 * struct RAR_block_info - user space struct that
-		 *			   describes RAR buffer
-		 * @type:	Type of RAR memory (e.g.,
-		 *		RAR_TYPE_VIDEO or RAR_TYPE_AUDIO) [in]
-		 * @size:	Requested size of a block in bytes to
-		 *		be reserved in RAR. [in]
-		 * @handle:	Handle that can be used to refer to
-		 *		reserved block. [out]
-		 *
-		 * This is the basic structure exposed to the user
-		 * space that describes a given RAR buffer.  It used
-		 * as the parameter for the RAR_HANDLER_RESERVE ioctl.
-		 * The buffer's underlying bus address is not exposed
-		 * to the user.  User space code refers to the buffer
-		 * entirely by "handle".
-		 */
-		struct RAR_block_info {
-			__u32 type;
-			__u32 size;
-			__u32 handle;
-		};
-
-		/**
-		 * struct RAR_stat - RAR statistics structure
-		 * @type:		Type of RAR memory (e.g.,
-		 *			RAR_TYPE_VIDEO or
-		 *			RAR_TYPE_AUDIO) [in]
-		 * @capacity:		Total size of RAR memory
-		 *			region. [out]
-		 * @largest_block_size:	Size of the largest reservable
-		 *			block. [out]
-		 *
-		 * This structure is used for RAR_HANDLER_STAT ioctl.
-		 */
-		struct RAR_stat {
-			__u32 type;
-			__u32 capacity;
-			__u32 largest_block_size;
-		};
-
-		Lastly, the RAR_HANDLER_RELEASE ioctl expects a
-		"handle" to the RAR block of memory.  It is a 32 bit
-		unsigned integer.
diff --git a/drivers/staging/memrar/memrar.h b/drivers/staging/memrar/memrar.h
deleted file mode 100644
index 0feb73b94c9..00000000000
--- a/drivers/staging/memrar/memrar.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- *      RAR Handler (/dev/memrar) internal driver API.
- *      Copyright (C) 2010 Intel Corporation. All rights reserved.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of version 2 of the GNU General
- *      Public License as published by the Free Software Foundation.
- *
- *      This program is distributed in the hope that it will be
- *      useful, but WITHOUT ANY WARRANTY; without even the implied
- *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- *      PURPOSE.  See the GNU General Public License for more details.
- *      You should have received a copy of the GNU General Public
- *      License along with this program; if not, write to the Free
- *      Software Foundation, Inc., 59 Temple Place - Suite 330,
- *      Boston, MA  02111-1307, USA.
- *      The full GNU General Public License is included in this
- *      distribution in the file called COPYING.
- */
-
-
-#ifndef _MEMRAR_H
-#define _MEMRAR_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-
-/**
- * struct RAR_stat - RAR statistics structure
- * @type:		Type of RAR memory (e.g., audio vs. video)
- * @capacity:		Total size of RAR memory region.
- * @largest_block_size:	Size of the largest reservable block.
- *
- * This structure is used for RAR_HANDLER_STAT ioctl and for the
- * RAR_get_stat() user space wrapper function.
- */
-struct RAR_stat {
-	__u32 type;
-	__u32 capacity;
-	__u32 largest_block_size;
-};
-
-
-/**
- * struct RAR_block_info - user space struct that describes RAR buffer
- * @type:	Type of RAR memory (e.g., audio vs. video)
- * @size:	Requested size of a block to be reserved in RAR.
- * @handle:	Handle that can be used to refer to reserved block.
- *
- * This is the basic structure exposed to the user space that
- * describes a given RAR buffer.  The buffer's underlying bus address
- * is not exposed to the user.  User space code refers to the buffer
- * entirely by "handle".
- */
-struct RAR_block_info {
-	__u32 type;
-	__u32 size;
-	__u32 handle;
-};
-
-
-#define RAR_IOCTL_BASE 0xE0
-
-/* Reserve RAR block. */
-#define RAR_HANDLER_RESERVE _IOWR(RAR_IOCTL_BASE, 0x00, struct RAR_block_info)
-
-/* Release previously reserved RAR block. */
-#define RAR_HANDLER_RELEASE _IOW(RAR_IOCTL_BASE, 0x01, __u32)
-
-/* Get RAR stats. */
-#define RAR_HANDLER_STAT    _IOWR(RAR_IOCTL_BASE, 0x02, struct RAR_stat)
-
-
-#ifdef __KERNEL__
-
-/* -------------------------------------------------------------- */
-/*               Kernel Side RAR Handler Interface                */
-/* -------------------------------------------------------------- */
-
-/**
- * struct RAR_buffer - kernel space struct that describes RAR buffer
- * @info:		structure containing base RAR buffer information
- * @bus_address:	buffer bus address
- *
- * Structure that contains all information related to a given block of
- * memory in RAR.  It is generally only used when retrieving RAR
- * related bus addresses.
- *
- * Note: This structure is used only by RAR-enabled drivers, and is
- *       not intended to be exposed to the user space.
- */
-struct RAR_buffer {
-	struct RAR_block_info info;
-	dma_addr_t bus_address;
-};
-
-#if defined(CONFIG_MRST_RAR_HANDLER)
-/**
- * rar_reserve() - reserve RAR buffers
- * @buffers:	array of RAR_buffers where type and size of buffers to
- *		reserve are passed in, handle and bus address are
- *		passed out
- * @count:	number of RAR_buffers in the "buffers" array
- *
- * This function will reserve buffers in the restricted access regions
- * of given types.
- *
- * It returns the number of successfully reserved buffers.  Successful
- * buffer reservations will have the corresponding bus_address field
- * set to a non-zero value in the given buffers vector.
- */
-extern size_t rar_reserve(struct RAR_buffer *buffers,
-			  size_t count);
-
-/**
- * rar_release() - release RAR buffers
- * @buffers:	array of RAR_buffers where handles to buffers to be
- *		released are passed in
- * @count:	number of RAR_buffers in the "buffers" array
- *
- * This function will release RAR buffers that were retrieved through
- * a call to rar_reserve() or rar_handle_to_bus() by decrementing the
- * reference count.  The RAR buffer will be reclaimed when the
- * reference count drops to zero.
- *
- * It returns the number of successfully released buffers.  Successful
- * releases will have their handle field set to zero in the given
- * buffers vector.
- */
-extern size_t rar_release(struct RAR_buffer *buffers,
-			  size_t count);
-
-/**
- * rar_handle_to_bus() - convert a vector of RAR handles to bus addresses
- * @buffers:	array of RAR_buffers containing handles to be
- *		converted to bus_addresses
- * @count:	number of RAR_buffers in the "buffers" array
-
- * This function will retrieve the RAR buffer bus addresses, type and
- * size corresponding to the RAR handles provided in the buffers
- * vector.
- *
- * It returns the number of successfully converted buffers.  The bus
- * address will be set to 0 for unrecognized handles.
- *
- * The reference count for each corresponding buffer in RAR will be
- * incremented.  Call rar_release() when done with the buffers.
- */
-extern size_t rar_handle_to_bus(struct RAR_buffer *buffers,
-				size_t count);
-
-#else
-
-extern inline size_t rar_reserve(struct RAR_buffer *buffers, size_t count)
-{
-	return 0;
-}
-
-extern inline size_t rar_release(struct RAR_buffer *buffers, size_t count)
-{
-	return 0;
-}
-
-extern inline size_t rar_handle_to_bus(struct RAR_buffer *buffers,
-				size_t count)
-{
-	return 0;
-}
-
-#endif  /* MRST_RAR_HANDLER */
-#endif  /* __KERNEL__ */
-
-#endif  /* _MEMRAR_H */
diff --git a/drivers/staging/memrar/memrar_allocator.c b/drivers/staging/memrar/memrar_allocator.c
deleted file mode 100644
index a4f8c5846a0..00000000000
--- a/drivers/staging/memrar/memrar_allocator.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- *      memrar_allocator 1.0:  An allocator for Intel RAR.
- *
- *      Copyright (C) 2010 Intel Corporation. All rights reserved.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of version 2 of the GNU General
- *      Public License as published by the Free Software Foundation.
- *
- *      This program is distributed in the hope that it will be
- *      useful, but WITHOUT ANY WARRANTY; without even the implied
- *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- *      PURPOSE.  See the GNU General Public License for more details.
- *      You should have received a copy of the GNU General Public
- *      License along with this program; if not, write to the Free
- *      Software Foundation, Inc., 59 Temple Place - Suite 330,
- *      Boston, MA  02111-1307, USA.
- *      The full GNU General Public License is included in this
- *      distribution in the file called COPYING.
- *
- *
- *  ------------------------------------------------------------------
- *
- *      This simple allocator implementation provides a
- *      malloc()/free()-like interface for reserving space within a
- *      previously reserved block of memory.  It is not specific to
- *      any hardware, nor is it coupled with the lower level paging
- *      mechanism.
- *
- *      The primary goal of this implementation is to provide a means
- *      to partition an arbitrary block of memory without actually
- *      accessing the memory or incurring any hardware side-effects
- *      (e.g. paging).  It is, in effect, a bookkeeping mechanism for
- *      buffers.
- */
-
-
-#include "memrar_allocator.h"
-#include <linux/slab.h>
-#include <linux/bug.h>
-#include <linux/kernel.h>
-
-
-struct memrar_allocator *memrar_create_allocator(unsigned long base,
-						 size_t capacity,
-						 size_t block_size)
-{
-	struct memrar_allocator *allocator  = NULL;
-	struct memrar_address_ranges *first_node = NULL;
-
-	/*
-	 * Make sure the base address is aligned on a block_size
-	 * boundary.
-	 *
-	 * @todo Is this necessary?
-	 */
-	/* base = ALIGN(base, block_size); */
-
-	/* Validate parameters.
-	 *
-	 * Make sure we can allocate the entire memory space.  Zero
-	 * capacity or block size are obviously invalid.
-	 */
-	if (base == 0
-	    || capacity == 0
-	    || block_size == 0
-	    || ULONG_MAX - capacity < base
-	    || capacity < block_size)
-		return allocator;
-
-	/*
-	 * There isn't much point in creating a memory allocator that
-	 * is only capable of holding one block but we'll allow it,
-	 * and issue a diagnostic.
-	 */
-	WARN(capacity < block_size * 2,
-	     "memrar: Only one block available to allocator.\n");
-
-	allocator = kmalloc(sizeof(*allocator), GFP_KERNEL);
-
-	if (allocator == NULL)
-		return allocator;
-
-	mutex_init(&allocator->lock);
-	allocator->base = base;
-
-	/* Round the capacity down to a multiple of block_size. */
-	allocator->capacity = (capacity / block_size) * block_size;
-
-	allocator->block_size = block_size;
-
-	allocator->largest_free_area = allocator->capacity;
-
-	/* Initialize the handle and free lists. */
-	INIT_LIST_HEAD(&allocator->allocated_list.list);
-	INIT_LIST_HEAD(&allocator->free_list.list);
-
-	first_node = kmalloc(sizeof(*first_node), GFP_KERNEL);
-	if (first_node == NULL)	{
-		kfree(allocator);
-		allocator = NULL;
-	} else {
-		/* Full range of blocks is available. */
-		first_node->range.begin = base;
-		first_node->range.end   = base + allocator->capacity;
-		list_add(&first_node->list,
-			 &allocator->free_list.list);
-	}
-
-	return allocator;
-}
-
-void memrar_destroy_allocator(struct memrar_allocator *allocator)
-{
-	/*
-	 * Assume that the memory allocator lock isn't held at this
-	 * point in time.  Caller must ensure that.
-	 */
-
-	struct memrar_address_ranges *pos = NULL;
-	struct memrar_address_ranges *n   = NULL;
-
-	if (allocator == NULL)
-		return;
-
-	mutex_lock(&allocator->lock);
-
-	/* Reclaim free list resources. */
-	list_for_each_entry_safe(pos,
-				 n,
-				 &allocator->free_list.list,
-				 list) {
-		list_del(&pos->list);
-		kfree(pos);
-	}
-
-	mutex_unlock(&allocator->lock);
-
-	kfree(allocator);
-}
-
-unsigned long memrar_allocator_alloc(struct memrar_allocator *allocator,
-				     size_t size)
-{
-	struct memrar_address_ranges *pos = NULL;
-
-	size_t num_blocks;
-	unsigned long reserved_bytes;
-
-	/*
-	 * Address of allocated buffer.  We assume that zero is not a
-	 * valid address.
-	 */
-	unsigned long addr = 0;
-
-	if (allocator == NULL || size == 0)
-		return addr;
-
-	/* Reserve enough blocks to hold the amount of bytes requested. */
-	num_blocks = DIV_ROUND_UP(size, allocator->block_size);
-
-	reserved_bytes = num_blocks * allocator->block_size;
-
-	mutex_lock(&allocator->lock);
-
-	if (reserved_bytes > allocator->largest_free_area) {
-		mutex_unlock(&allocator->lock);
-		return addr;
-	}
-
-	/*
-	 * Iterate through the free list to find a suitably sized
-	 * range of free contiguous memory blocks.
-	 *
-	 * We also take the opportunity to reset the size of the
-	 * largest free area size statistic.
-	 */
-	list_for_each_entry(pos, &allocator->free_list.list, list) {
-		struct memrar_address_range * const fr = &pos->range;
-		size_t const curr_size = fr->end - fr->begin;
-
-		if (curr_size >= reserved_bytes && addr == 0) {
-			struct memrar_address_range *range = NULL;
-			struct memrar_address_ranges * const new_node =
-				kmalloc(sizeof(*new_node), GFP_KERNEL);
-
-			if (new_node == NULL)
-				break;
-
-			list_add(&new_node->list,
-				 &allocator->allocated_list.list);
-
-			/*
-			 * Carve out area of memory from end of free
-			 * range.
-			 */
-			range        = &new_node->range;
-			range->end   = fr->end;
-			fr->end     -= reserved_bytes;
-			range->begin = fr->end;
-			addr         = range->begin;
-
-			/*
-			 * Check if largest area has decreased in
-			 * size.  We'll need to continue scanning for
-			 * the next largest area if it has.
-			 */
-			if (curr_size == allocator->largest_free_area)
-				allocator->largest_free_area -=
-					reserved_bytes;
-			else
-				break;
-		}
-
-		/*
-		 * Reset largest free area size statistic as needed,
-		 * but only if we've actually allocated memory.
-		 */
-		if (addr != 0
-		    && curr_size > allocator->largest_free_area) {
-			allocator->largest_free_area = curr_size;
-			break;
-		}
-	}
-
-	mutex_unlock(&allocator->lock);
-
-	return addr;
-}
-
-long memrar_allocator_free(struct memrar_allocator *allocator,
-			   unsigned long addr)
-{
-	struct list_head *pos = NULL;
-	struct list_head *tmp = NULL;
-	struct list_head *dst = NULL;
-
-	struct memrar_address_ranges      *allocated = NULL;
-	struct memrar_address_range const *handle    = NULL;
-
-	unsigned long old_end        = 0;
-	unsigned long new_chunk_size = 0;
-
-	if (allocator == NULL)
-		return -EINVAL;
-
-	if (addr == 0)
-		return 0;  /* Ignore "free(0)". */
-
-	mutex_lock(&allocator->lock);
-
-	/* Find the corresponding handle. */
-	list_for_each_entry(allocated,
-			    &allocator->allocated_list.list,
-			    list) {
-		if (allocated->range.begin == addr) {
-			handle = &allocated->range;
-			break;
-		}
-	}
-
-	/* No such buffer created by this allocator. */
-	if (handle == NULL) {
-		mutex_unlock(&allocator->lock);
-		return -EFAULT;
-	}
-
-	/*
-	 * Coalesce adjacent chunks of memory if possible.
-	 *
-	 * @note This isn't full blown coalescing since we're only
-	 *       coalescing at most three chunks of memory.
-	 */
-	list_for_each_safe(pos, tmp, &allocator->free_list.list) {
-		/* @todo O(n) performance.  Optimize. */
-
-		struct memrar_address_range * const chunk =
-			&list_entry(pos,
-				    struct memrar_address_ranges,
-				    list)->range;
-
-		/* Extend size of existing free adjacent chunk. */
-		if (chunk->end == handle->begin) {
-			/*
-			 * Chunk "less than" than the one we're
-			 * freeing is adjacent.
-			 *
-			 * Before:
-			 *
-			 *   +-----+------+
-			 *   |chunk|handle|
-			 *   +-----+------+
-			 *
-			 * After:
-			 *
-			 *   +------------+
-			 *   |   chunk    |
-			 *   +------------+
-			 */
-
-			struct memrar_address_ranges const * const next =
-				list_entry(pos->next,
-					   struct memrar_address_ranges,
-					   list);
-
-			chunk->end = handle->end;
-
-			/*
-			 * Now check if next free chunk is adjacent to
-			 * the current extended free chunk.
-			 *
-			 * Before:
-			 *
-			 *   +------------+----+
-			 *   |   chunk    |next|
-			 *   +------------+----+
-			 *
-			 * After:
-			 *
-			 *   +-----------------+
-			 *   |      chunk      |
-			 *   +-----------------+
-			 */
-			if (!list_is_singular(pos)
-			    && chunk->end == next->range.begin) {
-				chunk->end = next->range.end;
-				list_del(pos->next);
-				kfree(next);
-			}
-
-			list_del(&allocated->list);
-
-			new_chunk_size = chunk->end - chunk->begin;
-
-			goto exit_memrar_free;
-
-		} else if (handle->end == chunk->begin) {
-			/*
-			 * Chunk "greater than" than the one we're
-			 * freeing is adjacent.
-			 *
-			 *   +------+-----+
-			 *   |handle|chunk|
-			 *   +------+-----+
-			 *
-			 * After:
-			 *
-			 *   +------------+
-			 *   |   chunk    |
-			 *   +------------+
-			 */
-
-			struct memrar_address_ranges const * const prev =
-				list_entry(pos->prev,
-					   struct memrar_address_ranges,
-					   list);
-
-			chunk->begin = handle->begin;
-
-			/*
-			 * Now check if previous free chunk is
-			 * adjacent to the current extended free
-			 * chunk.
-			 *
-			 *
-			 * Before:
-			 *
-			 *   +----+------------+
-			 *   |prev|   chunk    |
-			 *   +----+------------+
-			 *
-			 * After:
-			 *
-			 *   +-----------------+
-			 *   |      chunk      |
-			 *   +-----------------+
-			 */
-			if (!list_is_singular(pos)
-			    && prev->range.end == chunk->begin) {
-				chunk->begin = prev->range.begin;
-				list_del(pos->prev);
-				kfree(prev);
-			}
-
-			list_del(&allocated->list);
-
-			new_chunk_size = chunk->end - chunk->begin;
-
-			goto exit_memrar_free;
-
-		} else if (chunk->end < handle->begin
-			   && chunk->end > old_end) {
-			/* Keep track of where the entry could be
-			 * potentially moved from the "allocated" list
-			 * to the "free" list if coalescing doesn't
-			 * occur, making sure the "free" list remains
-			 * sorted.
-			 */
-			old_end = chunk->end;
-			dst = pos;
-		}
-	}
-
-	/*
-	 * Nothing to coalesce.
-	 *
-	 * Move the entry from the "allocated" list to the "free"
-	 * list.
-	 */
-	list_move(&allocated->list, dst);
-	new_chunk_size = handle->end - handle->begin;
-	allocated = NULL;
-
-exit_memrar_free:
-
-	if (new_chunk_size > allocator->largest_free_area)
-		allocator->largest_free_area = new_chunk_size;
-
-	mutex_unlock(&allocator->lock);
-
-	kfree(allocated);
-
-	return 0;
-}
-
-
-
-/*
-  Local Variables:
-    c-file-style: "linux"
-  End:
-*/
diff --git a/drivers/staging/memrar/memrar_allocator.h b/drivers/staging/memrar/memrar_allocator.h
deleted file mode 100644
index 0b80dead710..00000000000
--- a/drivers/staging/memrar/memrar_allocator.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *      Copyright (C) 2010 Intel Corporation. All rights reserved.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of version 2 of the GNU General
- *      Public License as published by the Free Software Foundation.
- *
- *      This program is distributed in the hope that it will be
- *      useful, but WITHOUT ANY WARRANTY; without even the implied
- *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- *      PURPOSE.  See the GNU General Public License for more details.
- *      You should have received a copy of the GNU General Public
- *      License along with this program; if not, write to the Free
- *      Software Foundation, Inc., 59 Temple Place - Suite 330,
- *      Boston, MA  02111-1307, USA.
- *      The full GNU General Public License is included in this
- *      distribution in the file called COPYING.
- */
-
-#ifndef MEMRAR_ALLOCATOR_H
-#define MEMRAR_ALLOCATOR_H
-
-
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-
-/**
- * struct memrar_address_range - struct that describes a memory range
- * @begin:	Beginning of available address range.
- * @end:	End of available address range, one past the end,
- *		i.e. [begin, end).
- */
-struct memrar_address_range {
-/* private: internal use only */
-	unsigned long begin;
-	unsigned long end;
-};
-
-/**
- * struct memrar_address_ranges - list of areas of memory.
- * @list:	Linked list of address ranges.
- * @range:	Memory address range corresponding to given list node.
- */
-struct memrar_address_ranges {
-/* private: internal use only */
-	struct list_head list;
-	struct memrar_address_range range;
-};
-
-/**
- * struct memrar_allocator - encapsulation of the memory allocator state
- * @lock:		Lock used to synchronize access to the memory
- *			allocator state.
- * @base:		Base (start) address of the allocator memory
- *			space.
- * @capacity:		Size of the allocator memory space in bytes.
- * @block_size:		The size in bytes of individual blocks within
- *			the allocator memory space.
- * @largest_free_area:	Largest free area of memory in the allocator
- *			in bytes.
- * @allocated_list:	List of allocated memory block address
- *			ranges.
- * @free_list:		List of free address ranges.
- *
- * This structure contains all memory allocator state, including the
- * base address, capacity, free list, lock, etc.
- */
-struct memrar_allocator {
-/* private: internal use only */
-	struct mutex lock;
-	unsigned long base;
-	size_t capacity;
-	size_t block_size;
-	size_t largest_free_area;
-	struct memrar_address_ranges allocated_list;
-	struct memrar_address_ranges free_list;
-};
-
-/**
- * memrar_create_allocator() - create a memory allocator
- * @base:	Address at which the memory allocator begins.
- * @capacity:	Desired size of the memory allocator.  This value must
- *		be larger than the block_size, ideally more than twice
- *		as large since there wouldn't be much point in using a
- *		memory allocator otherwise.
- * @block_size:	The size of individual blocks within the memory
- *		allocator.  This value must smaller than the
- *		capacity.
- *
- * Create a memory allocator with the given capacity and block size.
- * The capacity will be reduced to be a multiple of the block size, if
- * necessary.
- *
- * Returns an instance of the memory allocator, if creation succeeds,
- * otherwise zero if creation fails.  Failure may occur if not enough
- * kernel memory exists to create the memrar_allocator instance
- * itself, or if the capacity and block_size arguments are not
- * compatible or make sense.
- */
-struct memrar_allocator *memrar_create_allocator(unsigned long base,
-						 size_t capacity,
-						 size_t block_size);
-
-/**
- * memrar_destroy_allocator() - destroy allocator
- * @allocator:	The allocator being destroyed.
- *
- * Reclaim resources held by the memory allocator.  The caller must
- * explicitly free all memory reserved by memrar_allocator_alloc()
- * prior to calling this function.  Otherwise leaks will occur.
- */
-void memrar_destroy_allocator(struct memrar_allocator *allocator);
-
-/**
- * memrar_allocator_alloc() - reserve an area of memory of given size
- * @allocator:	The allocator instance being used to reserve buffer.
- * @size:	The size in bytes of the buffer to allocate.
- *
- * This functions reserves an area of memory managed by the given
- * allocator.  It returns zero if allocation was not possible.
- * Failure may occur if the allocator no longer has space available.
- */
-unsigned long memrar_allocator_alloc(struct memrar_allocator *allocator,
-				     size_t size);
-
-/**
- * memrar_allocator_free() - release buffer starting at given address
- * @allocator:	The allocator instance being used to release the buffer.
- * @address:	The address of the buffer being released.
- *
- * Release an area of memory starting at the given address.  Failure
- * could occur if the given address is not in the address space
- * managed by the allocator.  Returns zero on success or an errno
- * (negative value) on failure.
- */
-long memrar_allocator_free(struct memrar_allocator *allocator,
-			   unsigned long address);
-
-#endif  /* MEMRAR_ALLOCATOR_H */
-
-
-/*
-  Local Variables:
-    c-file-style: "linux"
-  End:
-*/
diff --git a/drivers/staging/memrar/memrar_handler.c b/drivers/staging/memrar/memrar_handler.c
deleted file mode 100644
index cfcaa8e5b8e..00000000000
--- a/drivers/staging/memrar/memrar_handler.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-/*
- *      memrar_handler 1.0:  An Intel restricted access region handler device
- *
- *      Copyright (C) 2010 Intel Corporation. All rights reserved.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of version 2 of the GNU General
- *      Public License as published by the Free Software Foundation.
- *
- *      This program is distributed in the hope that it will be
- *      useful, but WITHOUT ANY WARRANTY; without even the implied
- *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- *      PURPOSE.  See the GNU General Public License for more details.
- *      You should have received a copy of the GNU General Public
- *      License along with this program; if not, write to the Free
- *      Software Foundation, Inc., 59 Temple Place - Suite 330,
- *      Boston, MA  02111-1307, USA.
- *      The full GNU General Public License is included in this
- *      distribution in the file called COPYING.
- *
- * -------------------------------------------------------------------
- *
- *      Moorestown restricted access regions (RAR) provide isolated
- *      areas of main memory that are only acceessible by authorized
- *      devices.
- *
- *      The Intel Moorestown RAR handler module exposes a kernel space
- *      RAR memory management mechanism.  It is essentially a
- *      RAR-specific allocator.
- *
- *      Besides providing RAR buffer management, the RAR handler also
- *      behaves in many ways like an OS virtual memory manager.  For
- *      example, the RAR "handles" created by the RAR handler are
- *      analogous to user space virtual addresses.
- *
- *      RAR memory itself is never accessed directly by the RAR
- *      handler.
- */
-
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/kref.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-#include <linux/uaccess.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/rar_register.h>
-
-#include "memrar.h"
-#include "memrar_allocator.h"
-
-
-#define MEMRAR_VER "1.0"
-
-/*
- * Moorestown supports three restricted access regions.
- *
- * We only care about the first two, video and audio.  The third,
- * reserved for Chaabi and the P-unit, will be handled by their
- * respective drivers.
- */
-#define MRST_NUM_RAR 2
-
-/* ---------------- -------------------- ------------------- */
-
-/**
- * struct memrar_buffer_info - struct that keeps track of all RAR buffers
- * @list:	Linked list of memrar_buffer_info objects.
- * @buffer:	Core RAR buffer information.
- * @refcount:	Reference count.
- * @owner:	File handle corresponding to process that reserved the
- *		block of memory in RAR.  This will be zero for buffers
- *		allocated by other drivers instead of by a user space
- *		process.
- *
- * This structure encapsulates a link list of RAR buffers, as well as
- * other characteristics specific to a given list node, such as the
- * reference count on the corresponding RAR buffer.
- */
-struct memrar_buffer_info {
-	struct list_head list;
-	struct RAR_buffer buffer;
-	struct kref refcount;
-	struct file *owner;
-};
-
-/**
- * struct memrar_rar_info - characteristics of a given RAR
- * @base:	Base bus address of the RAR.
- * @length:	Length of the RAR.
- * @iobase:	Virtual address of RAR mapped into kernel.
- * @allocator:	Allocator associated with the RAR.  Note the allocator
- *		"capacity" may be smaller than the RAR length if the
- *		length is not a multiple of the configured allocator
- *		block size.
- * @buffers:	Table that keeps track of all reserved RAR buffers.
- * @lock:	Lock used to synchronize access to RAR-specific data
- *		structures.
- *
- * Each RAR has an associated memrar_rar_info structure that describes
- * where in memory the RAR is located, how large it is, and a list of
- * reserved RAR buffers inside that RAR.  Each RAR also has a mutex
- * associated with it to reduce lock contention when operations on
- * multiple RARs are performed in parallel.
- */
-struct memrar_rar_info {
-	dma_addr_t base;
-	unsigned long length;
-	void __iomem *iobase;
-	struct memrar_allocator *allocator;
-	struct memrar_buffer_info buffers;
-	struct mutex lock;
-	int allocated;	/* True if we own this RAR */
-};
-
-/*
- * Array of RAR characteristics.
- */
-static struct memrar_rar_info memrars[MRST_NUM_RAR];
-
-/* ---------------- -------------------- ------------------- */
-
-/* Validate RAR type. */
-static inline int memrar_is_valid_rar_type(u32 type)
-{
-	return type == RAR_TYPE_VIDEO || type == RAR_TYPE_AUDIO;
-}
-
-/* Check if an address/handle falls with the given RAR memory range. */
-static inline int memrar_handle_in_range(struct memrar_rar_info *rar,
-					 u32 vaddr)
-{
-	unsigned long const iobase = (unsigned long) (rar->iobase);
-	return (vaddr >= iobase && vaddr < iobase + rar->length);
-}
-
-/* Retrieve RAR information associated with the given handle. */
-static struct memrar_rar_info *memrar_get_rar_info(u32 vaddr)
-{
-	int i;
-	for (i = 0; i < MRST_NUM_RAR; ++i) {
-		struct memrar_rar_info * const rar = &memrars[i];
-		if (memrar_handle_in_range(rar, vaddr))
-			return rar;
-	}
-
-	return NULL;
-}
-
-/**
- *	memrar_get_bus address		-	handle to bus address
- *
- *	Retrieve bus address from given handle.
- *
- *	Returns address corresponding to given handle.  Zero if handle is
- *	invalid.
- */
-static dma_addr_t memrar_get_bus_address(
-	struct memrar_rar_info *rar,
-	u32 vaddr)
-{
-	unsigned long const iobase = (unsigned long) (rar->iobase);
-
-	if (!memrar_handle_in_range(rar, vaddr))
-		return 0;
-
-	/*
-	 * An assumption is made that the virtual address offset is
-	 * the same as the bus address offset, at least based on the
-	 * way this driver is implemented.  For example, vaddr + 2 ==
-	 * baddr + 2.
-	 *
-	 * @todo Is that a valid assumption?
-	 */
-	return rar->base + (vaddr - iobase);
-}
-
-/**
- *	memrar_get_physical_address	-	handle to physical address
- *
- *	Retrieve physical address from given handle.
- *
- *	Returns address corresponding to given handle.  Zero if handle is
- *	invalid.
- */
-static dma_addr_t memrar_get_physical_address(
-	struct memrar_rar_info *rar,
-	u32 vaddr)
-{
-	/*
-	 * @todo This assumes that the bus address and physical
-	 *       address are the same.  That is true for Moorestown
-	 *       but not necessarily on other platforms.  This
-	 *       deficiency should be addressed at some point.
-	 */
-	return memrar_get_bus_address(rar, vaddr);
-}
-
-/**
- *	memrar_release_block	-	release a block to the pool
- *	@kref: kref of block
- *
- *	Core block release code. A node has hit zero references so can
- *	be released and the lists must be updated.
- *
- *	Note: This code removes the node from a list.  Make sure any list
- *	iteration is performed using list_for_each_safe().
- */
-static void memrar_release_block_i(struct kref *ref)
-{
-	/*
-	 * Last reference is being released.  Remove from the table,
-	 * and reclaim resources.
-	 */
-
-	struct memrar_buffer_info * const node =
-		container_of(ref, struct memrar_buffer_info, refcount);
-
-	struct RAR_block_info * const user_info =
-		&node->buffer.info;
-
-	struct memrar_allocator * const allocator =
-		memrars[user_info->type].allocator;
-
-	list_del(&node->list);
-
-	memrar_allocator_free(allocator, user_info->handle);
-
-	kfree(node);
-}
-
-/**
- *	memrar_init_rar_resources	-	configure a RAR
- *	@rarnum: rar that has been allocated
- *	@devname: name of our device
- *
- *	Initialize RAR parameters, such as bus addresses, etc and make
- *	the resource accessible.
- */
-static int memrar_init_rar_resources(int rarnum, char const *devname)
-{
-	/* ---- Sanity Checks ----
-	 * 1. RAR bus addresses in both Lincroft and Langwell RAR
-	 *    registers should be the same.
-	 *    a. There's no way we can do this through IA.
-	 *
-	 * 2. Secure device ID in Langwell RAR registers should be set
-	 *    appropriately, e.g. only LPE DMA for the audio RAR, and
-	 *    security for the other Langwell based RAR registers.
-	 *    a. There's no way we can do this through IA.
-	 *
-	 * 3. Audio and video RAR registers and RAR access should be
-	 *    locked down.  If not, enable RAR access control.  Except
-	 *    for debugging purposes, there is no reason for them to
-	 *    be unlocked.
-	 *    a.  We can only do this for the Lincroft (IA) side.
-	 *
-	 * @todo Should the RAR handler driver even be aware of audio
-	 *       and video RAR settings?
-	 */
-
-	/*
-	 * RAR buffer block size.
-	 *
-	 * We choose it to be the size of a page to simplify the
-	 * /dev/memrar mmap() implementation and usage.  Otherwise
-	 * paging is not involved once an RAR is locked down.
-	 */
-	static size_t const RAR_BLOCK_SIZE = PAGE_SIZE;
-
-	dma_addr_t low, high;
-	struct memrar_rar_info * const rar = &memrars[rarnum];
-
-	BUG_ON(MRST_NUM_RAR != ARRAY_SIZE(memrars));
-	BUG_ON(!memrar_is_valid_rar_type(rarnum));
-	BUG_ON(rar->allocated);
-
-	if (rar_get_address(rarnum, &low, &high) != 0)
-		/* No RAR is available. */
-		return -ENODEV;
-
-	if (low == 0 || high == 0) {
-		rar->base      = 0;
-		rar->length    = 0;
-		rar->iobase    = NULL;
-		rar->allocator = NULL;
-		return -ENOSPC;
-	}
-
-	/*
-	 * @todo Verify that LNC and LNW RAR register contents
-	 *       addresses, security, etc are compatible and
-	 *       consistent).
-	 */
-
-	rar->length = high - low + 1;
-
-	/* Claim RAR memory as our own. */
-	if (request_mem_region(low, rar->length, devname) == NULL) {
-		rar->length = 0;
-		pr_err("%s: Unable to claim RAR[%d] memory.\n",
-		       devname, rarnum);
-		pr_err("%s: RAR[%d] disabled.\n", devname, rarnum);
-		return -EBUSY;
-	}
-
-	rar->base = low;
-
-	/*
-	 * Now map it into the kernel address space.
-	 *
-	 * Note that the RAR memory may only be accessed by IA
-	 * when debugging.  Otherwise attempts to access the
-	 * RAR memory when it is locked down will result in
-	 * behavior similar to writing to /dev/null and
-	 * reading from /dev/zero.  This behavior is enforced
-	 * by the hardware.  Even if we don't access the
-	 * memory, mapping it into the kernel provides us with
-	 * a convenient RAR handle to bus address mapping.
-	 */
-	rar->iobase = ioremap_nocache(rar->base, rar->length);
-	if (rar->iobase == NULL) {
-		pr_err("%s: Unable to map RAR memory.\n", devname);
-		release_mem_region(low, rar->length);
-		return -ENOMEM;
-	}
-
-	/* Initialize corresponding memory allocator. */
-	rar->allocator = memrar_create_allocator((unsigned long) rar->iobase,
-						rar->length, RAR_BLOCK_SIZE);
-	if (rar->allocator == NULL) {
-		iounmap(rar->iobase);
-		release_mem_region(low, rar->length);
-		return -ENOMEM;
-	}
-
-	pr_info("%s: BRAR[%d] bus address range = [0x%lx, 0x%lx]\n",
-		devname, rarnum, (unsigned long) low, (unsigned long) high);
-
-	pr_info("%s: BRAR[%d] size = %zu KiB\n",
-			devname, rarnum, rar->allocator->capacity / 1024);
-
-	rar->allocated = 1;
-	return 0;
-}
-
-/**
- *	memrar_fini_rar_resources	-	free up RAR resources
- *
- *	Finalize RAR resources. Free up the resource tables, hand the memory
- *	back to the kernel, unmap the device and release the address space.
- */
-static void memrar_fini_rar_resources(void)
-{
-	int z;
-	struct memrar_buffer_info *pos;
-	struct memrar_buffer_info *tmp;
-
-	/*
-	 * @todo Do we need to hold a lock at this point in time?
-	 *       (module initialization failure or exit?)
-	 */
-
-	for (z = MRST_NUM_RAR; z-- != 0; ) {
-		struct memrar_rar_info * const rar = &memrars[z];
-
-		if (!rar->allocated)
-			continue;
-
-		/* Clean up remaining resources. */
-
-		list_for_each_entry_safe(pos,
-					 tmp,
-					 &rar->buffers.list,
-					 list) {
-			kref_put(&pos->refcount, memrar_release_block_i);
-		}
-
-		memrar_destroy_allocator(rar->allocator);
-		rar->allocator = NULL;
-
-		iounmap(rar->iobase);
-		release_mem_region(rar->base, rar->length);
-
-		rar->iobase = NULL;
-		rar->base = 0;
-		rar->length = 0;
-
-		unregister_rar(z);
-	}
-}
-
-/**
- *	memrar_reserve_block	-	handle an allocation request
- *	@request: block being requested
- *	@filp: owner it is tied to
- *
- *	Allocate a block of the requested RAR. If successful return the
- *	request object filled in and zero, if not report an error code
- */
-
-static long memrar_reserve_block(struct RAR_buffer *request,
-				 struct file *filp)
-{
-	struct RAR_block_info * const rinfo = &request->info;
-	struct RAR_buffer *buffer;
-	struct memrar_buffer_info *buffer_info;
-	u32 handle;
-	struct memrar_rar_info *rar = NULL;
-
-	/* Prevent array overflow. */
-	if (!memrar_is_valid_rar_type(rinfo->type))
-		return -EINVAL;
-
-	rar = &memrars[rinfo->type];
-	if (!rar->allocated)
-		return -ENODEV;
-
-	/* Reserve memory in RAR. */
-	handle = memrar_allocator_alloc(rar->allocator, rinfo->size);
-	if (handle == 0)
-		return -ENOMEM;
-
-	buffer_info = kmalloc(sizeof(*buffer_info), GFP_KERNEL);
-
-	if (buffer_info == NULL) {
-		memrar_allocator_free(rar->allocator, handle);
-		return -ENOMEM;
-	}
-
-	buffer = &buffer_info->buffer;
-	buffer->info.type = rinfo->type;
-	buffer->info.size = rinfo->size;
-
-	/* Memory handle corresponding to the bus address. */
-	buffer->info.handle = handle;
-	buffer->bus_address = memrar_get_bus_address(rar, handle);
-
-	/*
-	 * Keep track of owner so that we can later cleanup if
-	 * necessary.
-	 */
-	buffer_info->owner = filp;
-
-	kref_init(&buffer_info->refcount);
-
-	mutex_lock(&rar->lock);
-	list_add(&buffer_info->list, &rar->buffers.list);
-	mutex_unlock(&rar->lock);
-
-	rinfo->handle = buffer->info.handle;
-	request->bus_address = buffer->bus_address;
-
-	return 0;
-}
-
-/**
- *	memrar_release_block		-	release a RAR block
- *	@addr: address in RAR space
- *
- *	Release a previously allocated block. Releases act on complete
- *	blocks, partially freeing a block is not supported
- */
-
-static long memrar_release_block(u32 addr)
-{
-	struct memrar_buffer_info *pos;
-	struct memrar_buffer_info *tmp;
-	struct memrar_rar_info * const rar = memrar_get_rar_info(addr);
-	long result = -EINVAL;
-
-	if (rar == NULL)
-		return -ENOENT;
-
-	mutex_lock(&rar->lock);
-
-	/*
-	 * Iterate through the buffer list to find the corresponding
-	 * buffer to be released.
-	 */
-	list_for_each_entry_safe(pos,
-				 tmp,
-				 &rar->buffers.list,
-				 list) {
-		struct RAR_block_info * const info =
-			&pos->buffer.info;
-
-		/*
-		 * Take into account handle offsets that may have been
-		 * added to the base handle, such as in the following
-		 * scenario:
-		 *
-		 *     u32 handle = base + offset;
-		 *     rar_handle_to_bus(handle);
-		 *     rar_release(handle);
-		 */
-		if (addr >= info->handle
-		    && addr < (info->handle + info->size)
-		    && memrar_is_valid_rar_type(info->type)) {
-			kref_put(&pos->refcount, memrar_release_block_i);
-			result = 0;
-			break;
-		}
-	}
-
-	mutex_unlock(&rar->lock);
-
-	return result;
-}
-
-/**
- *	memrar_get_stats	-	read statistics for a RAR
- *	@r: statistics to be filled in
- *
- *	Returns the statistics data for the RAR, or an error code if
- *	the request cannot be completed
- */
-static long memrar_get_stat(struct RAR_stat *r)
-{
-	struct memrar_allocator *allocator;
-
-	if (!memrar_is_valid_rar_type(r->type))
-		return -EINVAL;
-
-	if (!memrars[r->type].allocated)
-		return -ENODEV;
-
-	allocator = memrars[r->type].allocator;
-
-	BUG_ON(allocator == NULL);
-
-	/*
-	 * Allocator capacity doesn't change over time.  No
-	 * need to synchronize.
-	 */
-	r->capacity = allocator->capacity;
-
-	mutex_lock(&allocator->lock);
-	r->largest_block_size = allocator->largest_free_area;
-	mutex_unlock(&allocator->lock);
-	return 0;
-}
-
-/**
- *	memrar_ioctl		-	ioctl callback
- *	@filp: file issuing the request
- *	@cmd: command
- *	@arg: pointer to control information
- *
- *	Perform one of the ioctls supported by the memrar device
- */
-
-static long memrar_ioctl(struct file *filp,
-			 unsigned int cmd,
-			 unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	long result = 0;
-
-	struct RAR_buffer buffer;
-	struct RAR_block_info * const request = &buffer.info;
-	struct RAR_stat rar_info;
-	u32 rar_handle;
-
-	switch (cmd) {
-	case RAR_HANDLER_RESERVE:
-		if (copy_from_user(request,
-				   argp,
-				   sizeof(*request)))
-			return -EFAULT;
-
-		result = memrar_reserve_block(&buffer, filp);
-		if (result != 0)
-			return result;
-
-		return copy_to_user(argp, request, sizeof(*request));
-
-	case RAR_HANDLER_RELEASE:
-		if (copy_from_user(&rar_handle,
-				   argp,
-				   sizeof(rar_handle)))
-			return -EFAULT;
-
-		return memrar_release_block(rar_handle);
-
-	case RAR_HANDLER_STAT:
-		if (copy_from_user(&rar_info,
-				   argp,
-				   sizeof(rar_info)))
-			return -EFAULT;
-
-		/*
-		 * Populate the RAR_stat structure based on the RAR
-		 * type given by the user
-		 */
-		if (memrar_get_stat(&rar_info) != 0)
-			return -EINVAL;
-
-		/*
-		 * @todo Do we need to verify destination pointer
-		 *       "argp" is non-zero?  Is that already done by
-		 *       copy_to_user()?
-		 */
-		return copy_to_user(argp,
-				    &rar_info,
-				    sizeof(rar_info)) ? -EFAULT : 0;
-
-	default:
-		return -ENOTTY;
-	}
-
-	return 0;
-}
-
-/**
- *	memrar_mmap		-	mmap helper for deubgging
- *	@filp: handle doing the mapping
- *	@vma: memory area
- *
- *	Support the mmap operation on the RAR space for debugging systems
- *	when the memory is not locked down.
- */
-
-static int memrar_mmap(struct file *filp, struct vm_area_struct *vma)
-{
-	/*
-	 * This mmap() implementation is predominantly useful for
-	 * debugging since the CPU will be prevented from accessing
-	 * RAR memory by the hardware when RAR is properly locked
-	 * down.
-	 *
-	 * In order for this implementation to be useful RAR memory
-	 * must be not be locked down.  However, we only want to do
-	 * that when debugging.  DO NOT leave RAR memory unlocked in a
-	 * deployed device that utilizes RAR.
-	 */
-
-	size_t const size = vma->vm_end - vma->vm_start;
-
-	/* Users pass the RAR handle as the mmap() offset parameter. */
-	unsigned long const handle = vma->vm_pgoff << PAGE_SHIFT;
-
-	struct memrar_rar_info * const rar = memrar_get_rar_info(handle);
-	unsigned long pfn;
-
-	/* Only allow priviledged apps to go poking around this way */
-	if (!capable(CAP_SYS_RAWIO))
-		return -EPERM;
-
-	/* Invalid RAR handle or size passed to mmap(). */
-	if (rar == NULL
-	    || handle == 0
-	    || size > (handle - (unsigned long) rar->iobase))
-		return -EINVAL;
-
-	/*
-	 * Retrieve physical address corresponding to the RAR handle,
-	 * and convert it to a page frame.
-	 */
-	pfn = memrar_get_physical_address(rar, handle) >> PAGE_SHIFT;
-
-
-	pr_debug("memrar: mapping RAR range [0x%lx, 0x%lx) into user space.\n",
-		 handle,
-		 handle + size);
-
-	/*
-	 * Map RAR memory into user space.  This is really only useful
-	 * for debugging purposes since the memory won't be
-	 * accessible, i.e. reads return zero and writes are ignored,
-	 * when RAR access control is enabled.
-	 */
-	if (remap_pfn_range(vma,
-			    vma->vm_start,
-			    pfn,
-			    size,
-			    vma->vm_page_prot))
-		return -EAGAIN;
-
-	/* vma->vm_ops = &memrar_mem_ops; */
-
-	return 0;
-}
-
-/**
- *	memrar_open		-	device open method
- *	@inode: inode to open
- *	@filp: file handle
- *
- *	As we support multiple arbitary opens there is no work to be done
- *	really.
- */
-
-static int memrar_open(struct inode *inode, struct file *filp)
-{
-	nonseekable_open(inode, filp);
-	return 0;
-}
-
-/**
- *	memrar_release		-	close method for miscev
- *	@inode: inode of device
- *	@filp: handle that is going away
- *
- *	Free up all the regions that belong to this file handle. We use
- *	the handle as a natural Linux style 'lifetime' indicator and to
- *	ensure resources are not leaked when their owner explodes in an
- *	unplanned fashion.
- */
-
-static int memrar_release(struct inode *inode, struct file *filp)
-{
-	/* Free all regions associated with the given file handle. */
-
-	struct memrar_buffer_info *pos;
-	struct memrar_buffer_info *tmp;
-	int z;
-
-	for (z = 0; z != MRST_NUM_RAR; ++z) {
-		struct memrar_rar_info * const rar = &memrars[z];
-
-		mutex_lock(&rar->lock);
-
-		list_for_each_entry_safe(pos,
-					 tmp,
-					 &rar->buffers.list,
-					 list) {
-			if (filp == pos->owner)
-				kref_put(&pos->refcount,
-					 memrar_release_block_i);
-		}
-
-		mutex_unlock(&rar->lock);
-	}
-
-	return 0;
-}
-
-/**
- *	rar_reserve		-	reserve RAR memory
- *	@buffers: buffers to reserve
- *	@count: number wanted
- *
- *	Reserve a series of buffers in the RAR space. Returns the number of
- *	buffers successfully allocated
- */
-
-size_t rar_reserve(struct RAR_buffer *buffers, size_t count)
-{
-	struct RAR_buffer * const end =
-		(buffers == NULL ? buffers : buffers + count);
-	struct RAR_buffer *i;
-
-	size_t reserve_count = 0;
-
-	for (i = buffers; i != end; ++i) {
-		if (memrar_reserve_block(i, NULL) == 0)
-			++reserve_count;
-		else
-			i->bus_address = 0;
-	}
-
-	return reserve_count;
-}
-EXPORT_SYMBOL(rar_reserve);
-
-/**
- *	rar_release		-	return RAR buffers
- *	@buffers: buffers to release
- *	@size: size of released block
- *
- *	Return a set of buffers to the RAR pool
- */
-
-size_t rar_release(struct RAR_buffer *buffers, size_t count)
-{
-	struct RAR_buffer * const end =
-		(buffers == NULL ? buffers : buffers + count);
-	struct RAR_buffer *i;
-
-	size_t release_count = 0;
-
-	for (i = buffers; i != end; ++i) {
-		u32 * const handle = &i->info.handle;
-		if (memrar_release_block(*handle) == 0) {
-			/*
-			 * @todo We assume we should do this each time
-			 *       the ref count is decremented.  Should
-			 *       we instead only do this when the ref
-			 *       count has dropped to zero, and the
-			 *       buffer has been completely
-			 *       released/unmapped?
-			 */
-			*handle = 0;
-			++release_count;
-		}
-	}
-
-	return release_count;
-}
-EXPORT_SYMBOL(rar_release);
-
-/**
- *	rar_handle_to_bus	-	RAR to bus address
- *	@buffers: RAR buffer structure
- *	@count: number of buffers to convert
- *
- *	Turn a list of RAR handle mappings into actual bus addresses. Note
- *	that when the device is locked down the bus addresses in question
- *	are not CPU accessible.
- */
-
-size_t rar_handle_to_bus(struct RAR_buffer *buffers, size_t count)
-{
-	struct RAR_buffer * const end =
-		(buffers == NULL ? buffers : buffers + count);
-	struct RAR_buffer *i;
-	struct memrar_buffer_info *pos;
-
-	size_t conversion_count = 0;
-
-	/*
-	 * Find all bus addresses corresponding to the given handles.
-	 *
-	 * @todo Not liking this nested loop.  Optimize.
-	 */
-	for (i = buffers; i != end; ++i) {
-		struct memrar_rar_info * const rar =
-			memrar_get_rar_info(i->info.handle);
-
-		/*
-		 * Check if we have a bogus handle, and then continue
-		 * with remaining buffers.
-		 */
-		if (rar == NULL) {
-			i->bus_address = 0;
-			continue;
-		}
-
-		mutex_lock(&rar->lock);
-
-		list_for_each_entry(pos, &rar->buffers.list, list) {
-			struct RAR_block_info * const user_info =
-				&pos->buffer.info;
-
-			/*
-			 * Take into account handle offsets that may
-			 * have been added to the base handle, such as
-			 * in the following scenario:
-			 *
-			 *     u32 handle = base + offset;
-			 *     rar_handle_to_bus(handle);
-			 */
-
-			if (i->info.handle >= user_info->handle
-			    && i->info.handle < (user_info->handle
-						 + user_info->size)) {
-				u32 const offset =
-					i->info.handle - user_info->handle;
-
-				i->info.type = user_info->type;
-				i->info.size = user_info->size - offset;
-				i->bus_address =
-					pos->buffer.bus_address
-					+ offset;
-
-				/* Increment the reference count. */
-				kref_get(&pos->refcount);
-
-				++conversion_count;
-				break;
-			} else {
-				i->bus_address = 0;
-			}
-		}
-
-		mutex_unlock(&rar->lock);
-	}
-
-	return conversion_count;
-}
-EXPORT_SYMBOL(rar_handle_to_bus);
-
-static const struct file_operations memrar_fops = {
-	.owner = THIS_MODULE,
-	.unlocked_ioctl = memrar_ioctl,
-	.mmap           = memrar_mmap,
-	.open           = memrar_open,
-	.release        = memrar_release,
-	.llseek		= no_llseek,
-};
-
-static struct miscdevice memrar_miscdev = {
-	.minor = MISC_DYNAMIC_MINOR,    /* dynamic allocation */
-	.name = "memrar",               /* /dev/memrar */
-	.fops = &memrar_fops
-};
-
-static char const banner[] __initdata =
-	KERN_INFO
-	"Intel RAR Handler: " MEMRAR_VER " initialized.\n";
-
-/**
- *	memrar_registration_callback	-	RAR obtained
- *	@rar: RAR number
- *
- *	We have been granted ownership of the RAR. Add it to our memory
- *	management tables
- */
-
-static int memrar_registration_callback(unsigned long rar)
-{
-	/*
-	 * We initialize the RAR parameters early on so that we can
-	 * discontinue memrar device initialization and registration
-	 * if suitably configured RARs are not available.
-	 */
-	return memrar_init_rar_resources(rar, memrar_miscdev.name);
-}
-
-/**
- *	memrar_init	-	initialise RAR support
- *
- *	Initialise support for RAR handlers. This may get loaded before
- *	the RAR support is activated, but the callbacks on the registration
- *	will handle that situation for us anyway.
- */
-
-static int __init memrar_init(void)
-{
-	int err;
-	int i;
-
-	printk(banner);
-
-	/*
-	 * Some delayed initialization is performed in this driver.
-	 * Make sure resources that are used during driver clean-up
-	 * (e.g. during driver's release() function) are fully
-	 * initialized before first use.  This is particularly
-	 * important for the case when the delayed initialization
-	 * isn't completed, leaving behind a partially initialized
-	 * driver.
-	 *
-	 * Such a scenario can occur when RAR is not available on the
-	 * platform, and the driver is release()d.
-	 */
-	for (i = 0; i != ARRAY_SIZE(memrars); ++i) {
-		struct memrar_rar_info * const rar = &memrars[i];
-		mutex_init(&rar->lock);
-		INIT_LIST_HEAD(&rar->buffers.list);
-	}
-
-	err = misc_register(&memrar_miscdev);
-	if (err)
-		return err;
-
-	/* Now claim the two RARs we want */
-	err = register_rar(0, memrar_registration_callback, 0);
-	if (err)
-		goto fail;
-
-	err = register_rar(1, memrar_registration_callback, 1);
-	if (err == 0)
-		return 0;
-
-	/* It is possible rar 0 registered and allocated resources then rar 1
-	   failed so do a full resource free */
-	memrar_fini_rar_resources();
-fail:
-	misc_deregister(&memrar_miscdev);
-	return err;
-}
-
-/**
- *	memrar_exit	-	unregister and unload
- *
- *	Unregister the device and then unload any mappings and release
- *	the RAR resources
- */
-
-static void __exit memrar_exit(void)
-{
-	misc_deregister(&memrar_miscdev);
-	memrar_fini_rar_resources();
-}
-
-
-module_init(memrar_init);
-module_exit(memrar_exit);
-
-
-MODULE_AUTHOR("Ossama Othman <ossama.othman@intel.com>");
-MODULE_DESCRIPTION("Intel Restricted Access Region Handler");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MEMRAR_VER);
-
-
-
-/*
-  Local Variables:
-    c-file-style: "linux"
-  End:
-*/
diff --git a/drivers/staging/msm/mdp4_overlay.c b/drivers/staging/msm/mdp4_overlay.c
index de284c28faa..b9acf529929 100644
--- a/drivers/staging/msm/mdp4_overlay.c
+++ b/drivers/staging/msm/mdp4_overlay.c
@@ -696,7 +696,7 @@ void mdp4_mixer_stage_down(struct mdp4_overlay_pipe *pipe)
 	stage = pipe->mixer_stage;
 	mixer = pipe->mixer_num;
 
-	if (pipe != ctrl->stage[mixer][stage])	/* not runing */
+	if (pipe != ctrl->stage[mixer][stage])	/* not running */
 		return;
 
 	/* MDP_LAYERMIXER_IN_CFG, shard by both mixer 0 and 1  */
diff --git a/drivers/staging/msm/mdp_ppp_dq.c b/drivers/staging/msm/mdp_ppp_dq.c
index 3dc1c0cc61f..3a687c7a569 100644
--- a/drivers/staging/msm/mdp_ppp_dq.c
+++ b/drivers/staging/msm/mdp_ppp_dq.c
@@ -200,7 +200,7 @@ static void mdp_ppp_flush_dirty_djobs(void *cond)
 		msm_fb_ensure_mem_coherency_after_dma(job->info, &job->req, 1);
 
 		/* Schedule jobs for cleanup
-		 * A seperate worker thread does this */
+		 * A separate worker thread does this */
 		queue_delayed_work(mdp_ppp_djob_clnr, &job->cleaner,
 			mdp_timer_duration);
 	}
diff --git a/drivers/staging/msm/msm_fb.c b/drivers/staging/msm/msm_fb.c
index a2f29d46405..e7ef836eb8d 100644
--- a/drivers/staging/msm/msm_fb.c
+++ b/drivers/staging/msm/msm_fb.c
@@ -859,7 +859,7 @@ static int msm_fb_register(struct msm_fb_data_type *mfd)
 		break;
 
 	default:
-		MSM_FB_ERR("msm_fb_init: fb %d unkown image type!\n",
+		MSM_FB_ERR("msm_fb_init: fb %d unknown image type!\n",
 			   mfd->index);
 		return ret;
 	}
@@ -1793,9 +1793,9 @@ static int msmfb_async_blit(struct fb_info *info, void __user *p)
 /*
  * NOTE: The userspace issues blit operations in a sequence, the sequence
  * start with a operation marked START and ends in an operation marked
- * END. It is guranteed by the userspace that all the blit operations
+ * END. It is guaranteed by the userspace that all the blit operations
  * between START and END are only within the regions of areas designated
- * by the START and END operations and that the userspace doesnt modify
+ * by the START and END operations and that the userspace doesn't modify
  * those areas. Hence it would be enough to perform barrier/cache operations
  * only on the START and END operations.
  */
diff --git a/drivers/staging/octeon/cvmx-cmd-queue.h b/drivers/staging/octeon/cvmx-cmd-queue.h
index 59d22142229..614653b686a 100644
--- a/drivers/staging/octeon/cvmx-cmd-queue.h
+++ b/drivers/staging/octeon/cvmx-cmd-queue.h
@@ -214,7 +214,7 @@ static inline int __cvmx_cmd_queue_get_index(cvmx_cmd_queue_id_t queue_id)
 	/*
 	 * Warning: This code currently only works with devices that
 	 * have 256 queues or less. Devices with more than 16 queues
-	 * are layed out in memory to allow cores quick access to
+	 * are laid out in memory to allow cores quick access to
 	 * every 16th queue. This reduces cache thrashing when you are
 	 * running 16 queues per port to support lockless operation.
 	 */
diff --git a/drivers/staging/octeon/cvmx-fpa.h b/drivers/staging/octeon/cvmx-fpa.h
index 50a8c91778f..1f04f965873 100644
--- a/drivers/staging/octeon/cvmx-fpa.h
+++ b/drivers/staging/octeon/cvmx-fpa.h
@@ -195,7 +195,7 @@ static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool)
 	cvmx_fpa_iobdma_data_t data;
 
 	/*
-	 * Hardware only uses 64 bit alligned locations, so convert
+	 * Hardware only uses 64 bit aligned locations, so convert
 	 * from byte address to 64-bit index
 	 */
 	data.s.scraddr = scr_addr >> 3;
diff --git a/drivers/staging/octeon/cvmx-helper-board.h b/drivers/staging/octeon/cvmx-helper-board.h
index 611a8e03c21..b465bec4355 100644
--- a/drivers/staging/octeon/cvmx-helper-board.h
+++ b/drivers/staging/octeon/cvmx-helper-board.h
@@ -81,7 +81,7 @@ extern int cvmx_helper_board_get_mii_address(int ipd_port);
  * @phy_addr:  The address of the PHY to program
  * @link_flags:
  *                  Flags to control autonegotiation.  Bit 0 is autonegotiation
- *                  enable/disable to maintain backware compatability.
+ *                  enable/disable to maintain backware compatibility.
  * @link_info: Link speed to program. If the speed is zero and autonegotiation
  *                  is enabled, all possible negotiation speeds are advertised.
  *
diff --git a/drivers/staging/octeon/cvmx-helper-util.c b/drivers/staging/octeon/cvmx-helper-util.c
index 41ef8a40bb0..131182bf5ab 100644
--- a/drivers/staging/octeon/cvmx-helper-util.c
+++ b/drivers/staging/octeon/cvmx-helper-util.c
@@ -362,7 +362,7 @@ int __cvmx_helper_setup_gmx(int interface, int num_ports)
 }
 
 /**
- * Returns the IPD/PKO port number for a port on teh given
+ * Returns the IPD/PKO port number for a port on the given
  * interface.
  *
  * @interface: Interface to use
diff --git a/drivers/staging/octeon/cvmx-helper.c b/drivers/staging/octeon/cvmx-helper.c
index 591506643d0..e9c5c836cef 100644
--- a/drivers/staging/octeon/cvmx-helper.c
+++ b/drivers/staging/octeon/cvmx-helper.c
@@ -691,7 +691,7 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
 
 		if (!retry_cnt)
 			cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT "
-				     "get_work() timeout occured.\n");
+				     "get_work() timeout occurred.\n");
 
 		/* Free packet */
 		if (work)
diff --git a/drivers/staging/octeon/cvmx-mdio.h b/drivers/staging/octeon/cvmx-mdio.h
index f45dc49512f..d88ab8d8e37 100644
--- a/drivers/staging/octeon/cvmx-mdio.h
+++ b/drivers/staging/octeon/cvmx-mdio.h
@@ -254,7 +254,7 @@ typedef union {
 #define MDIO_CLAUSE_45_READ_INC 2
 #define MDIO_CLAUSE_45_READ     3
 
-/* MMD identifiers, mostly for accessing devices withing XENPAK modules. */
+/* MMD identifiers, mostly for accessing devices within XENPAK modules. */
 #define CVMX_MMD_DEVICE_PMA_PMD      1
 #define CVMX_MMD_DEVICE_WIS          2
 #define CVMX_MMD_DEVICE_PCS          3
diff --git a/drivers/staging/octeon/cvmx-pko.h b/drivers/staging/octeon/cvmx-pko.h
index f068c198249..de3412aada5 100644
--- a/drivers/staging/octeon/cvmx-pko.h
+++ b/drivers/staging/octeon/cvmx-pko.h
@@ -98,7 +98,7 @@ typedef enum {
 	/*
 	 * PKO doesn't do any locking. It is the responsibility of the
 	 * application to make sure that no other core is accessing
-	 * the same queue at the smae time
+	 * the same queue at the same time
 	 */
 	CVMX_PKO_LOCK_NONE = 0,
 	/*
@@ -324,7 +324,7 @@ static inline void cvmx_pko_doorbell(uint64_t port, uint64_t queue,
  * - CVMX_PKO_LOCK_NONE
  *      - PKO doesn't do any locking. It is the responsibility
  *          of the application to make sure that no other core
- *          is accessing the same queue at the smae time.
+ *          is accessing the same queue at the same time.
  * - CVMX_PKO_LOCK_ATOMIC_TAG
  *      - PKO performs an atomic tagswitch to insure exclusive
  *          access to the output queue. This will maintain
diff --git a/drivers/staging/octeon/cvmx-pow.h b/drivers/staging/octeon/cvmx-pow.h
index bf9e069a898..999aefe3274 100644
--- a/drivers/staging/octeon/cvmx-pow.h
+++ b/drivers/staging/octeon/cvmx-pow.h
@@ -1492,8 +1492,8 @@ static inline void cvmx_pow_tag_sw_full(cvmx_wqe_t *wqp, uint32_t tag,
 /**
  * Switch to a NULL tag, which ends any ordering or
  * synchronization provided by the POW for the current
- * work queue entry.  This operation completes immediatly,
- * so completetion should not be waited for.
+ * work queue entry.  This operation completes immediately,
+ * so completion should not be waited for.
  * This function does NOT wait for previous tag switches to complete,
  * so the caller must ensure that any previous tag switches have completed.
  */
@@ -1532,8 +1532,8 @@ static inline void cvmx_pow_tag_sw_null_nocheck(void)
 /**
  * Switch to a NULL tag, which ends any ordering or
  * synchronization provided by the POW for the current
- * work queue entry.  This operation completes immediatly,
- * so completetion should not be waited for.
+ * work queue entry.  This operation completes immediately,
+ * so completion should not be waited for.
  * This function waits for any pending tag switches to complete
  * before requesting the switch to NULL.
  */
@@ -1672,7 +1672,7 @@ static inline void cvmx_pow_set_priority(uint64_t core_num,
 
 /**
  * Performs a tag switch and then an immediate deschedule. This completes
- * immediatly, so completion must not be waited for.  This function does NOT
+ * immediately, so completion must not be waited for.  This function does NOT
  * update the wqe in DRAM to match arguments.
  *
  * This function does NOT wait for any prior tag switches to complete, so the
@@ -1758,7 +1758,7 @@ static inline void cvmx_pow_tag_sw_desched_nocheck(
 
 /**
  * Performs a tag switch and then an immediate deschedule. This completes
- * immediatly, so completion must not be waited for.  This function does NOT
+ * immediately, so completion must not be waited for.  This function does NOT
  * update the wqe in DRAM to match arguments.
  *
  * This function waits for any prior tag switches to complete, so the
diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h
index 23467563fe5..c745a72a059 100644
--- a/drivers/staging/octeon/ethernet-util.h
+++ b/drivers/staging/octeon/ethernet-util.h
@@ -55,7 +55,7 @@ static inline int INTERFACE(int ipd_port)
 		return 2;
 	else if (ipd_port < 40)	/* Interface 3 for loopback */
 		return 3;
-	else if (ipd_port == 40)	/* Non existant interface for POW0 */
+	else if (ipd_port == 40)	/* Non existent interface for POW0 */
 		return 4;
 	else
 		panic("Illegal ipd_port %d passed to INTERFACE\n", ipd_port);
diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index f1082f50fdc..b0530676687 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -9,7 +9,7 @@ config FB_OLPC_DCON
 
 config FB_OLPC_DCON_1
 	bool "OLPC XO-1 DCON support"
-	depends on FB_OLPC_DCON
+	depends on FB_OLPC_DCON && GPIO_CS5535
 	default y
 	---help---
 	  Enable support for the DCON in XO-1 model laptops.  The kernel
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
index b154be7a2fe..22c04eabed4 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -12,6 +12,7 @@
  */
 #include <linux/cs5535.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <asm/olpc.h>
 
 #include "olpc_dcon.h"
@@ -80,7 +81,7 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
 	lob &= ~(1 << DCON_IRQ);
 	outb(lob, 0x4d0);
 
-	/* Register the interupt handler */
+	/* Register the interrupt handler */
 	if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", dcon)) {
 		printk(KERN_ERR "olpc-dcon: failed to request DCON's irq\n");
 		goto err_req_irq;
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
index e213b63f811..7aa9b1a45bd 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/gpio.h>
 #include <asm/olpc.h>
diff --git a/drivers/staging/pohmelfs/crypto.c b/drivers/staging/pohmelfs/crypto.c
index 6540864216c..5cca24fcf6c 100644
--- a/drivers/staging/pohmelfs/crypto.c
+++ b/drivers/staging/pohmelfs/crypto.c
@@ -745,7 +745,7 @@ static int pohmelfs_crypto_init_handshake(struct pohmelfs_sb *psb)
 
 	/*
 	 * At this point NETFS_CAPABILITIES response command
-	 * should setup superblock in a way, which is acceptible
+	 * should setup superblock in a way, which is acceptable
 	 * for both client and server, so if server refuses connection,
 	 * it will send error in transaction response.
 	 */
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index c93ef207b0b..c0f0ac7c1cd 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/statfs.h>
 #include <linux/writeback.h>
+#include <linux/prefetch.h>
 
 #include "netfs.h"
 
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index c45b09ed0d3..ca098cabc2b 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -148,7 +148,7 @@ static struct usb_driver quausb2_usb_driver = {
  * value of the line status flags from the port
  * @shadowMSR: Last received state of the modem status register, holds
  * the value of the modem status received from the port
- * @rcv_flush: Flag indicating that a receive flush has occured on
+ * @rcv_flush: Flag indicating that a receive flush has occurred on
  * the hardware.
  * @xmit_flush: Flag indicating that a transmit flush has been processed by
  * the hardware.
@@ -156,7 +156,7 @@ static struct usb_driver quausb2_usb_driver = {
  * includes the size (excluding header) of URBs that have been submitted but
  * have not yet been sent to to the device, and bytes that have been sent out
  * of the port but not yet reported sent by the "xmit_empty" messages (which
- * indicate the number of bytes sent each time they are recieved, despite the
+ * indicate the number of bytes sent each time they are received, despite the
  * misleading name).
  * - Starts at zero when port is initialised.
  * - is incremented by the size of the data to be written (no headers)
@@ -649,7 +649,7 @@ static void qt2_close(struct usb_serial_port *port)
 	/* although the USB side is now empty, the UART itself may
 	 * still be pushing characters out over the line, so we have to
 	 * wait testing the actual line status until the lines change
-	 * indicating that the data is done transfering. */
+	 * indicating that the data is done transferring. */
 	/* FIXME: slow this polling down so it doesn't run the USB bus flat out
 	 * if it actually has to spend any time in this loop (which it normally
 	 * doesn't because the buffer is nearly empty) */
@@ -726,7 +726,7 @@ static int qt2_write(struct tty_struct *tty, struct usb_serial_port *port,
 		return 0;
 	} else if (port_extra->tx_pending_bytes >= QT2_FIFO_DEPTH) {
 		/* buffer is full (==). > should not occur, but would indicate
-		 * that an overflow had occured */
+		 * that an overflow had occurred */
 		dbg("%s(): port transmit buffer is full!", __func__);
 		/* schedule_work(&port->work); commented in vendor driver */
 		return 0;
@@ -823,7 +823,7 @@ static int qt2_write_room(struct tty_struct *tty)
 	 * reduce the free space count by the size of the dispatched write.
 	 * When a "transmit empty" message comes back up the USB read stream,
 	 * we decrement the count by the number of bytes reported sent, thus
-	 * keeping track of the difference between sent and recieved bytes.
+	 * keeping track of the difference between sent and received bytes.
 	 */
 
 	room = (QT2_FIFO_DEPTH - port_extra->tx_pending_bytes);
@@ -1795,7 +1795,7 @@ static void qt2_process_rx_char(struct usb_serial_port *port,
 	}
 }
 
-/** @brief Retreive the value of a register from the device
+/** @brief Retrieve the value of a register from the device
  *
  * Issues a GET_REGISTER vendor-spcific request over the USB control
  * pipe to obtain a value back from a specific register on a specific
diff --git a/drivers/staging/rt2860/chip/rtmp_phy.h b/drivers/staging/rt2860/chip/rtmp_phy.h
index 98454df30a2..a52221f1294 100644
--- a/drivers/staging/rt2860/chip/rtmp_phy.h
+++ b/drivers/staging/rt2860/chip/rtmp_phy.h
@@ -467,7 +467,7 @@
 			DBGPRINT_ERR("BBP write R%d=0x%x fail. BusyCnt= %d.bPCIclkOff = %d. \n", _I, BbpCsr.word, BusyCnt, (_A)->bPCIclkOff);	\
 		}																	\
 	} else {							\
-		DBGPRINT_ERR("****** BBP_Write_Latch Buffer exceeds max boundry ****** \n");	\
+		DBGPRINT_ERR("****** BBP_Write_Latch Buffer exceeds max boundary ****** \n");	\
 	}																		\
 }
 #endif /* RTMP_MAC_PCI // */
diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c
index 62f6f6be4ac..133bc1b87d2 100644
--- a/drivers/staging/rt2860/common/ba_action.c
+++ b/drivers/staging/rt2860/common/ba_action.c
@@ -28,7 +28,7 @@
 #include "../rt_config.h"
 #include <linux/kernel.h>
 
-#define BA_ORI_INIT_SEQ		(pEntry->TxSeq[TID])	/*1                        // inital sequence number of BA session */
+#define BA_ORI_INIT_SEQ		(pEntry->TxSeq[TID])	/*1                        // initial sequence number of BA session */
 
 #define ORI_SESSION_MAX_RETRY	8
 #define ORI_BA_SESSION_TIMEOUT	(2000)	/* ms */
@@ -1487,7 +1487,7 @@ static void ba_enqueue_reordering_packet(struct rt_rtmp_adapter *pAd,
 
 		/*
 		 * flush all pending reordering mpdus
-		 * and receving mpdu to upper layer
+		 * and receiving mpdu to upper layer
 		 * make tcp/ip to take care reordering mechanism
 		 */
 		/*ba_refresh_reordering_mpdus(pAd, pBAEntry); */
diff --git a/drivers/staging/rt2860/common/cmm_aes.c b/drivers/staging/rt2860/common/cmm_aes.c
index a99879bada4..d70d229a6e5 100644
--- a/drivers/staging/rt2860/common/cmm_aes.c
+++ b/drivers/staging/rt2860/common/cmm_aes.c
@@ -858,7 +858,7 @@ static uint32 KT1[256];
 static uint32 KT2[256];
 static uint32 KT3[256];
 
-/* platform-independant	32-bit integer manipulation	macros */
+/* platform-independent	32-bit integer manipulation	macros */
 
 #define	GET_UINT32(n,b,i)						\
 {												\
diff --git a/drivers/staging/rt2860/common/cmm_cfg.c b/drivers/staging/rt2860/common/cmm_cfg.c
index 24f43937843..727f7992925 100644
--- a/drivers/staging/rt2860/common/cmm_cfg.c
+++ b/drivers/staging/rt2860/common/cmm_cfg.c
@@ -223,7 +223,7 @@ int RT_CfgSetWepKey(struct rt_rtmp_adapter *pAd,
         pAdapter	Pointer to our adapter
         keyString	WPA pre-shared key string
         pHashStr	String used for password hash function
-        hashStrLen	Lenght of the hash string
+        hashStrLen	Length of the hash string
         pPMKBuf		Output buffer of WPAPSK key
 
     Return:
diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c
index f6c193cb84e..33799e1449a 100644
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -337,7 +337,7 @@ int MlmeHardTransmitMgmtRing(struct rt_rtmp_adapter *pAd,
 
 	/* */
 	/* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
-	/* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
+	/* Data-Null packets also pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
 /*      if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL)) */
 	{
 		if ((pHeader_802_11->FC.SubType == SUBTYPE_ACTION) ||
@@ -1933,7 +1933,7 @@ BOOLEAN RTMPCheckEtherType(struct rt_rtmp_adapter *pAd, void *pPacket)
 
 	if (TypeLen <= 1500) {	/* 802.3, 802.3 LLC */
 		/*
-		   DestMAC(6) + SrcMAC(6) + Lenght(2) +
+		   DestMAC(6) + SrcMAC(6) + Length(2) +
 		   DSAP(1) + SSAP(1) + Control(1) +
 		   if the DSAP = 0xAA, SSAP=0xAA, Contorl = 0x03, it has a 5-bytes SNAP header.
 		   => + SNAP (5, OriginationID(3) + etherType(2))
diff --git a/drivers/staging/rt2860/common/cmm_data_pci.c b/drivers/staging/rt2860/common/cmm_data_pci.c
index 7af59ff9e22..f01a51c381f 100644
--- a/drivers/staging/rt2860/common/cmm_data_pci.c
+++ b/drivers/staging/rt2860/common/cmm_data_pci.c
@@ -438,13 +438,13 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd,
 	/* Add Rx size to channel load counter, we should ignore error counts */
 	pAd->StaCfg.CLBusyBytes += (pRxD->SDL0 + 14);
 
-	/* Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics */
+	/* Drop ToDs promiscuous frame, it is opened due to CCX 2 channel load statistics */
 	if (pHeader != NULL) {
 		if (pHeader->FC.ToDs) {
 			return (NDIS_STATUS_FAILURE);
 		}
 	}
-	/* Drop not U2M frames, cant's drop here because we will drop beacon in this case */
+	/* Drop not U2M frames, can't drop here because we will drop beacon in this case */
 	/* I am kind of doubting the U2M bit operation */
 	/* if (pRxD->U2M == 0) */
 	/*      return(NDIS_STATUS_FAILURE); */
@@ -939,7 +939,7 @@ int MlmeHardTransmitTxRing(struct rt_rtmp_adapter *pAd,
 	/* */
 	/* */
 	/* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
-	/* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
+	/* Data-Null packets also pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
 	if (pHeader_802_11->FC.Type != BTYPE_DATA) {
 		if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ)
 		    || !(pAd->CommonCfg.bAPSDCapable
diff --git a/drivers/staging/rt2860/common/cmm_data_usb.c b/drivers/staging/rt2860/common/cmm_data_usb.c
index 7c56c2f5198..83a62faa7e5 100644
--- a/drivers/staging/rt2860/common/cmm_data_usb.c
+++ b/drivers/staging/rt2860/common/cmm_data_usb.c
@@ -702,7 +702,7 @@ Arguments:
 	*pRxPending			pending received packet flag
 
 Return Value:
-    the recieved packet
+    the received packet
 
 Note:
 ========================================================================
@@ -850,7 +850,7 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd,
 	/* Add Rx size to channel load counter, we should ignore error counts */
 	pAd->StaCfg.CLBusyBytes += (pRxWI->MPDUtotalByteCount + 14);
 
-	/* Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics */
+	/* Drop ToDs promiscuous frame, it is opened due to CCX 2 channel load statistics */
 	if (pHeader->FC.ToDs) {
 		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Err;FC.ToDs\n"));
 		return NDIS_STATUS_FAILURE;
@@ -860,7 +860,7 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd,
 		DBGPRINT_RAW(RT_DEBUG_ERROR, ("received packet too long\n"));
 		return NDIS_STATUS_FAILURE;
 	}
-	/* Drop not U2M frames, cant's drop here because we will drop beacon in this case */
+	/* Drop not U2M frames, can't drop here because we will drop beacon in this case */
 	/* I am kind of doubting the U2M bit operation */
 	/* if (pRxD->U2M == 0) */
 	/*      return(NDIS_STATUS_FAILURE); */
diff --git a/drivers/staging/rt2860/common/cmm_mac_pci.c b/drivers/staging/rt2860/common/cmm_mac_pci.c
index 21eed2507e1..d06f0a6dc37 100644
--- a/drivers/staging/rt2860/common/cmm_mac_pci.c
+++ b/drivers/staging/rt2860/common/cmm_mac_pci.c
@@ -1446,7 +1446,7 @@ BOOLEAN RT28xxPciAsicRadioOff(struct rt_rtmp_adapter *pAd,
 	   pAd->CheckDmaBusyCount = 0;
 	   }
 	 */
-/*KH Debug:My original codes have the follwoing codes, but currecnt codes do not have it. */
+/*KH Debug:My original codes have the following codes, but currecnt codes do not have it. */
 /* Disable for stability. If PCIE Link Control is modified for advance power save, re-covery this code segment. */
 	RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x1280);
 /*OPSTATUS_SET_FLAG(pAd, fOP_STATUS_CLKSELECT_40MHZ); */
diff --git a/drivers/staging/rt2860/common/cmm_sanity.c b/drivers/staging/rt2860/common/cmm_sanity.c
index 6b003c90344..3bfb4ad00c1 100644
--- a/drivers/staging/rt2860/common/cmm_sanity.c
+++ b/drivers/staging/rt2860/common/cmm_sanity.c
@@ -67,7 +67,7 @@ BOOLEAN MlmeAddBAReqSanity(struct rt_rtmp_adapter *pAd,
 
 	if ((MsgLen != sizeof(struct rt_mlme_addba_req))) {
 		DBGPRINT(RT_DEBUG_TRACE,
-			 ("MlmeAddBAReqSanity fail - message lenght not correct.\n"));
+			 ("MlmeAddBAReqSanity fail - message length not correct.\n"));
 		return FALSE;
 	}
 
@@ -104,7 +104,7 @@ BOOLEAN MlmeDelBAReqSanity(struct rt_rtmp_adapter *pAd, void * Msg, unsigned lon
 
 	if ((MsgLen != sizeof(struct rt_mlme_delba_req))) {
 		DBGPRINT(RT_DEBUG_ERROR,
-			 ("MlmeDelBAReqSanity fail - message lenght not correct.\n"));
+			 ("MlmeDelBAReqSanity fail - message length not correct.\n"));
 		return FALSE;
 	}
 
diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c
index f84194da47b..aefe1b77465 100644
--- a/drivers/staging/rt2860/common/cmm_sync.c
+++ b/drivers/staging/rt2860/common/cmm_sync.c
@@ -694,7 +694,7 @@ void ScanNextChannel(struct rt_rtmp_adapter *pAd)
 			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
 			MlmeFreeMemory(pAd, pOutBuffer);
 		}
-		/* For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse */
+		/* For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe response */
 
 		pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
 	}
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index 0040f45b629..616ebec50c6 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -1222,7 +1222,7 @@ void PeerGroupMsg2Action(struct rt_rtmp_adapter *pAd,
 
 	Note:
 		All these constants are defined in wpa.h
-		For supplicant, there is only EAPOL Key message avaliable
+		For supplicant, there is only EAPOL Key message available
 
 	========================================================================
 */
@@ -1267,7 +1267,7 @@ BOOLEAN WpaMsgTypeSubst(u8 EAPType, int * MsgType)
 		int		prefix_len	-	the length of the label
 		u8	*data		-	a specific data with variable length
 		int		data_len	-	the length of a specific data
-		int		len			-	the output lenght
+		int		len			-	the output length
 
 	Return Value:
 		u8	*output		-	the calculated result
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index d9c3fd5c216..e48eac0f3a2 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -632,7 +632,7 @@ void MlmeHalt(struct rt_rtmp_adapter *pAd)
 			pChipOps->AsicHaltAction(pAd);
 	}
 
-	RTMPusecDelay(5000);	/*  5 msec to gurantee Ant Diversity timer canceled */
+	RTMPusecDelay(5000);	/*  5 msec to guarantee Ant Diversity timer canceled */
 
 	MlmeQueueDestroy(&pAd->Mlme.Queue);
 	NdisFreeSpinLock(&pAd->Mlme.TaskLock);
@@ -1107,14 +1107,14 @@ void MlmeSelectTxRateTable(struct rt_rtmp_adapter *pAd,
 					*pInitTxRateIdx =
 					    RateSwitchTable11N1S[1];
 					DBGPRINT_RAW(RT_DEBUG_ERROR,
-						     ("DRS: unkown mode,default use 11N 1S AP \n"));
+						     ("DRS: unknown mode,default use 11N 1S AP \n"));
 				} else {
 					*ppTable = RateSwitchTable11N2S;
 					*pTableSize = RateSwitchTable11N2S[0];
 					*pInitTxRateIdx =
 					    RateSwitchTable11N2S[1];
 					DBGPRINT_RAW(RT_DEBUG_ERROR,
-						     ("DRS: unkown mode,default use 11N 2S AP \n"));
+						     ("DRS: unknown mode,default use 11N 2S AP \n"));
 				}
 			} else {
 				if (pAd->CommonCfg.TxStream == 1) {
@@ -1123,7 +1123,7 @@ void MlmeSelectTxRateTable(struct rt_rtmp_adapter *pAd,
 					*pInitTxRateIdx =
 					    RateSwitchTable11N1S[1];
 					DBGPRINT_RAW(RT_DEBUG_ERROR,
-						     ("DRS: unkown mode,default use 11N 1S AP \n"));
+						     ("DRS: unknown mode,default use 11N 1S AP \n"));
 				} else {
 					*ppTable = RateSwitchTable11N2SForABand;
 					*pTableSize =
@@ -1131,11 +1131,11 @@ void MlmeSelectTxRateTable(struct rt_rtmp_adapter *pAd,
 					*pInitTxRateIdx =
 					    RateSwitchTable11N2SForABand[1];
 					DBGPRINT_RAW(RT_DEBUG_ERROR,
-						     ("DRS: unkown mode,default use 11N 2S AP \n"));
+						     ("DRS: unknown mode,default use 11N 2S AP \n"));
 				}
 			}
 			DBGPRINT_RAW(RT_DEBUG_ERROR,
-				     ("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
+				     ("DRS: unknown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
 				      pAd->StaActive.SupRateLen,
 				      pAd->StaActive.ExtRateLen,
 				      pAd->StaActive.SupportedPhyInfo.MCSSet[0],
@@ -1368,7 +1368,7 @@ void STAMlmePeriodicExec(struct rt_rtmp_adapter *pAd)
 					if ((pAd->StaCfg.LastScanTime +
 					     10 * OS_HZ) < pAd->Mlme.Now32) {
 						DBGPRINT(RT_DEBUG_TRACE,
-							 ("MMCHK - Roaming, No eligable entry, try new scan!\n"));
+							 ("MMCHK - Roaming, No eligible entry, try new scan!\n"));
 						pAd->StaCfg.ScanCnt = 2;
 						pAd->StaCfg.LastScanTime =
 						    pAd->Mlme.Now32;
@@ -2828,7 +2828,7 @@ void UpdateBasicRateBitmap(struct rt_rtmp_adapter *pAdapter)
 
 /* IRQL = PASSIVE_LEVEL */
 /* IRQL = DISPATCH_LEVEL */
-/* bLinkUp is to identify the inital link speed. */
+/* bLinkUp is to identify the initial link speed. */
 /* TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps. */
 void MlmeUpdateTxRates(struct rt_rtmp_adapter *pAd, IN BOOLEAN bLinkUp, u8 apidx)
 {
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index d359a14f5d4..5fa193eac0d 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -2037,7 +2037,7 @@ void NICUpdateFifoStaCounters(struct rt_rtmp_adapter *pAd)
 
 			pEntry->FIFOCount = 0;
 			pEntry->OneSecTxNoRetryOkCount++;
-			/* update NoDataIdleCount when sucessful send packet to STA. */
+			/* update NoDataIdleCount when successful send packet to STA. */
 			pEntry->NoDataIdleCount = 0;
 			pEntry->ContinueTxFailCnt = 0;
 		}
@@ -2516,7 +2516,7 @@ void UserCfgInit(struct rt_rtmp_adapter *pAd)
 	/*pAd->TurnAggrBulkInCount = 0; */
 	pAd->bUsbTxBulkAggre = 0;
 
-	/* init as unsed value to ensure driver will set to MCU once. */
+	/* init as unused value to ensure driver will set to MCU once. */
 	pAd->LedIndicatorStrength = 0xFF;
 
 	pAd->CommonCfg.MaxPktOneTxBulk = 2;
@@ -3076,11 +3076,11 @@ void RTMPSetLED(struct rt_rtmp_adapter *pAd, u8 Status)
 	========================================================================
 
 	Routine Description:
-		Set LED Signal Stregth
+		Set LED Signal Strength
 
 	Arguments:
 		pAd						Pointer to our adapter
-		Dbm						Signal Stregth
+		Dbm						Signal Strength
 
 	Return Value:
 		None
@@ -3090,7 +3090,7 @@ void RTMPSetLED(struct rt_rtmp_adapter *pAd, u8 Status)
 	Note:
 		Can be run on any IRQL level.
 
-		According to Microsoft Zero Config Wireless Signal Stregth definition as belows.
+		According to Microsoft Zero Config Wireless Signal Strength definition as belows.
 		<= -90  No Signal
 		<= -81  Very Low
 		<= -71  Low
@@ -3118,7 +3118,7 @@ void RTMPSetSignalLED(struct rt_rtmp_adapter *pAd, IN NDIS_802_11_RSSI Dbm)
 			nLed = 31;
 
 		/* */
-		/* Update Signal Stregth to firmware if changed. */
+		/* Update Signal Strength to firmware if changed. */
 		/* */
 		if (pAd->LedIndicatorStrength != nLed) {
 			AsicSendCommandToMcu(pAd, 0x51, 0xff, nLed,
@@ -3166,7 +3166,7 @@ void RTMPEnableRxTx(struct rt_rtmp_adapter *pAd)
 		if (pAd->CommonCfg.PSPXlink)
 			rx_filter_flag = PSPXLINK;
 		else
-			rx_filter_flag = STANORMAL;	/* Staion not drop control frame will fail WiFi Certification. */
+			rx_filter_flag = STANORMAL;	/* Station not drop control frame will fail WiFi Certification. */
 		RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag);
 	}
 
diff --git a/drivers/staging/rt2860/common/spectrum.c b/drivers/staging/rt2860/common/spectrum.c
index c0d2f428069..ceb622df12d 100644
--- a/drivers/staging/rt2860/common/spectrum.c
+++ b/drivers/staging/rt2860/common/spectrum.c
@@ -1058,8 +1058,8 @@ static void InsertMeasureReqIE(struct rt_rtmp_adapter *pAd,
 		3. Measure Token.
 		4. Measure Request Mode.
 		5. Measure Request Type.
-		6. Length of Report Infomation
-		7. Pointer of Report Infomation Buffer.
+		6. Length of Report Information
+		7. Pointer of Report Information Buffer.
 
 	Return	: None.
 	==========================================================================
@@ -1400,7 +1400,7 @@ static void StartDFSProcedure(struct rt_rtmp_adapter *pAd,
 	Parametrs:
 		1. MLME message containing the received frame
 		2. message length.
-		3. Channel switch announcement infomation buffer.
+		3. Channel switch announcement information buffer.
 
 	Return	: None.
 	==========================================================================
@@ -1465,7 +1465,7 @@ static BOOLEAN PeerChSwAnnSanity(struct rt_rtmp_adapter *pAd,
 	Parametrs:
 		1. MLME message containing the received frame
 		2. message length.
-		3. Measurement request infomation buffer.
+		3. Measurement request information buffer.
 
 	Return	: None.
 	==========================================================================
@@ -1538,8 +1538,8 @@ static BOOLEAN PeerMeasureReqSanity(struct rt_rtmp_adapter *pAd,
 	Parametrs:
 		1. MLME message containing the received frame
 		2. message length.
-		3. Measurement report infomation buffer.
-		4. basic report infomation buffer.
+		3. Measurement report information buffer.
+		4. basic report information buffer.
 
 	Return	: None.
 	==========================================================================
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index cd1ee3d7a91..a285851692e 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -374,7 +374,7 @@ struct PACKED rt_sec_cha_offset_ie {
 struct rt_ht_phy_info {
 	BOOLEAN bHtEnable;	/* If we should use ht rate. */
 	BOOLEAN bPreNHt;	/* If we should use ht rate. */
-	/*Substract from HT Capability IE */
+	/*Subtract from HT Capability IE */
 	u8 MCSSet[16];
 };
 
@@ -392,7 +392,7 @@ struct rt_ht_capability {
 	u16 AmsduSize:1;	/* Max receiving A-MSDU size */
 	u16 rsv:5;
 
-	/*Substract from Addiont HT INFO IE */
+	/*Subtract from Addiont HT INFO IE */
 	u8 MaxRAmpduFactor:2;
 	u8 MpduDensity:3;
 	u8 ExtChanOffset:2;	/* Please note the difference with following     u8   NewExtChannelOffset; from 802.11n */
@@ -410,7 +410,7 @@ struct rt_ht_capability {
 	u8 BSSCoexist2040;
 };
 
-/*   field in Addtional HT Information IE . */
+/*   field in Additional HT Information IE . */
 struct PACKED rt_add_htinfo {
 	u8 ExtChanOffset:2;
 	u8 RecomWidth:1;
@@ -857,7 +857,7 @@ struct rt_state_machine {
 };
 
 /* MLME AUX data structure that holds temporarliy settings during a connection attempt. */
-/* Once this attemp succeeds, all settings will be copy to pAd->StaActive. */
+/* Once this attempt succeeds, all settings will be copy to pAd->StaActive. */
 /* A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of */
 /* several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely */
 /* separate this under-trial settings away from pAd->StaActive so that once */
diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c
index e5b04271243..1583347fcd5 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -283,7 +283,7 @@ BOOLEAN OS_Need_Clone_Packet(void)
 	Arguments:
 		pAd 	Pointer to our adapter
 		pInsAMSDUHdr	EWC A-MSDU format has extra 14-bytes header. if TRUE, insert this 14-byte hdr in front of MSDU.
-		*pSrcTotalLen			return total packet length. This lenght is calculated with 802.3 format packet.
+		*pSrcTotalLen			return total packet length. This length is calculated with 802.3 format packet.
 
 	Return Value:
 		NDIS_STATUS_SUCCESS
diff --git a/drivers/staging/rt2860/rt_pci_rbus.c b/drivers/staging/rt2860/rt_pci_rbus.c
index e5fb67cd9a6..f80ab4e6a0a 100644
--- a/drivers/staging/rt2860/rt_pci_rbus.c
+++ b/drivers/staging/rt2860/rt_pci_rbus.c
@@ -619,7 +619,7 @@ IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance)
 	   Or kernel will panic after ifconfig ra0 down sometimes */
 
 	/* */
-	/* Inital the Interrupt source. */
+	/* Initial the Interrupt source. */
 	/* */
 	IntSource.word = 0x00000000L;
 /*      McuIntSource.word = 0x00000000L; */
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index d16b06a6e2a..3c31340c946 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -756,7 +756,7 @@ struct rt_tkip_key_info {
 /* */
 struct rt_private {
 	u32 SystemResetCnt;	/* System reset counter */
-	u32 TxRingFullCnt;	/* Tx ring full occurrance number */
+	u32 TxRingFullCnt;	/* Tx ring full occurrence number */
 	u32 PhyRxErrCnt;	/* PHY Rx error count, for debug purpose, might move to global counter */
 	/* Variables for WEP encryption / decryption in rtmp_wep.c */
 	u32 FCSCRC32;
@@ -925,7 +925,7 @@ struct rt_mlme {
   **************************************************************************/
 struct reordering_mpdu {
 	struct reordering_mpdu *next;
-	void *pPacket;	/* coverted to 802.3 frame */
+	void *pPacket;	/* converted to 802.3 frame */
 	int Sequence;		/* sequence number of MPDU */
 	BOOLEAN bAMSDU;
 };
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index 5717e12a954..49b1013e7a0 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -2460,7 +2460,7 @@ int rt28xx_sta_ioctl(IN struct net_device *net_dev,
 		}
 	}
 
-	{			/* determine this ioctl command is comming from which interface. */
+	{			/* determine this ioctl command is coming from which interface. */
 		pObj->ioctl_if_type = INT_MAIN;
 		pObj->ioctl_if = MAIN_MBSSID;
 	}
diff --git a/drivers/staging/rt2870/common/rtusb_bulk.c b/drivers/staging/rt2870/common/rtusb_bulk.c
index d2746f8732e..679b802d216 100644
--- a/drivers/staging/rt2870/common/rtusb_bulk.c
+++ b/drivers/staging/rt2870/common/rtusb_bulk.c
@@ -298,7 +298,7 @@ void RTUSBBulkOutDataPacket(struct rt_rtmp_adapter *pAd,
 				/*|| ( (ThisBulkSize != 0)  && (pTxWI->AMPDU == 0)) */
 				) {
 				/* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
-				/* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
+				/* For performance in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
 				pHTTXContext->ENextBulkOutPosition =
 				    TmpBulkEndPos;
 				break;
@@ -311,7 +311,7 @@ void RTUSBBulkOutDataPacket(struct rt_rtmp_adapter *pAd,
 				    TmpBulkEndPos;
 				break;
 			} else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize & 0xfffff800) != 0)) /*|| ( (ThisBulkSize != 0)  && (pTxWI->AMPDU == 0)) */) {	/* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
-				/* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
+				/* For performance in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
 				pHTTXContext->ENextBulkOutPosition =
 				    TmpBulkEndPos;
 				break;
@@ -1016,7 +1016,7 @@ void RTUSBKickBulkOut(struct rt_rtmp_adapter *pAd)
 				RTUSBBulkOutNullFrame(pAd);
 			}
 		}
-		/* 8. No data avaliable */
+		/* 8. No data available */
 		else
 			;
 	}
diff --git a/drivers/staging/rt2870/common/rtusb_data.c b/drivers/staging/rt2870/common/rtusb_data.c
index 69368862217..5b72bcdaa78 100644
--- a/drivers/staging/rt2870/common/rtusb_data.c
+++ b/drivers/staging/rt2870/common/rtusb_data.c
@@ -71,7 +71,7 @@ void REPORT_AMSDU_FRAMES_TO_LLC(struct rt_rtmp_adapter *pAd,
 
 	Routine	Description:
 		This subroutine will scan through releative ring descriptor to find
-		out avaliable free ring descriptor and compare with request size.
+		out available free ring descriptor and compare with request size.
 
 	Arguments:
 		pAd	Pointer	to our adapter
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 1b3103fbf29..3162aabbeb0 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -1,6 +1,7 @@
 config R8187SE
 	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
 	depends on PCI && WLAN
+	depends on m
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select EEPROM_93CX6
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
index dc608c70deb..16aa6a8952f 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -1099,7 +1099,7 @@ struct ieee80211_device {
 	 * not set. As some cards may have different HW queues that
 	 * one might want to use for data and management frames
 	 * the option to have two callbacks might be useful.
-	 * This fucntion can't sleep.
+	 * This function can't sleep.
 	 */
 	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
 			       struct net_device *dev);
@@ -1138,9 +1138,9 @@ struct ieee80211_device {
 	 * it is called in a work_queue when swithcing to ad-hoc mode
 	 * or in behalf of iwlist scan when the card is associated
 	 * and root user ask for a scan.
-	 * the fucntion stop_scan should stop both the syncro and
+	 * the function stop_scan should stop both the syncro and
 	 * background scanning and can sleep.
-	 * The fucntion start_scan should initiate the background
+	 * The function start_scan should initiate the background
 	 * scanning and can't sleep.
 	 */
 	void (*scan_syncro)(struct net_device *dev);
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
index 771e0196842..736a1404f28 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -1954,7 +1954,7 @@ associate_complete:
 
 
 
-/* following are for a simplier TX queue management.
+/* following are for a simpler TX queue management.
  * Instead of using netif_[stop/wake]_queue the driver
  * will uses these two function (plus a reset one), that
  * will internally uses the kernel netif_* and takes
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 70ab0084e5f..2155a771c33 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -1591,7 +1591,7 @@ void rtl8180_rx(struct net_device *dev)
 		priv->RSSI = RSSI;
 		/* SQ translation formula is provided by SD3 DZ. 2006.06.27 */
 		if (quality >= 127)
-			quality = 1; /*0; */ /* 0 will cause epc to show signal zero , walk aroud now; */
+			quality = 1; /*0; */ /* 0 will cause epc to show signal zero , walk around now; */
 		else if (quality < 27)
 			quality = 100;
 		else
@@ -3883,7 +3883,7 @@ void rtl8180_tx_isr(struct net_device *dev, int pri, short error)
 	 * If the packet previous of the nic pointer has been
 	 * processed this doesn't matter: it will be checked
 	 * here at the next round. Anyway if no more packet are
-	 * TXed no memory leak occour at all.
+	 * TXed no memory leak occur at all.
 	 */
 
 	switch (pri) {
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index fc4907839c5..261085d4b74 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -123,7 +123,7 @@ DoTxHighPower(
 //
 //	Description:
 //		Callback function of UpdateTxPowerWorkItem.
-//		Because of some event happend, e.g. CCX TPC, High Power Mechanism,
+//		Because of some event happened, e.g. CCX TPC, High Power Mechanism,
 //		We update Tx power of current channel again.
 //
 void rtl8180_tx_pw_wq (struct work_struct *work)
@@ -984,7 +984,7 @@ StaRateAdaptive87SE(
 		{
 			priv->TryupingCount = 0;
 			//
-			// When transfering from CCK to OFDM, DIG is an important issue.
+			// When transferring from CCK to OFDM, DIG is an important issue.
 			//
 			if(priv->CurrentOperaRate == 22)
 				bUpdateInitialGain = true;
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index 2a2afd51cf4..3f09f76080a 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -378,7 +378,7 @@ static u32 read_rtl8225(struct net_device *dev, u8 adr)
 	mask = (low2high) ? 0x01 : (((u32)0x01) << (12-1));
 
 	/*
-	 * We must set data pin to HW controled, otherwise RF can't driver it
+	 * We must set data pin to HW controlled, otherwise RF can't driver it
 	 * and value RF register won't be able to read back properly.
 	 */
 	write_nic_word(dev, RFPinsEnable, (oval2 & (~0x01)));
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 3bdf9b31cc4..4b0b830f9ab 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -1273,7 +1273,7 @@ MgntDisconnectIBSS(
 	/*
 		Stop Beacon.
 
-		Vista add a Adhoc profile, HW radio off untill OID_DOT11_RESET_REQUEST
+		Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST
 		Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
 		Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
 
diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
index 2e64b239e24..750c347bfbe 100644
--- a/drivers/staging/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/Kconfig
@@ -1,6 +1,7 @@
 config RTL8192E
 	tristate "RealTek RTL8192E Wireless LAN NIC driver"
 	depends on PCI && WLAN
+	depends on m
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select CRYPTO
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211.h b/drivers/staging/rtl8192e/ieee80211/ieee80211.h
index 3ca38815261..dbe21ab0dbf 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211.h
@@ -1967,7 +1967,7 @@ struct ieee80211_device {
         u16 prev_seq_ctl;       /* used to drop duplicate frames */
 
 	/* map of allowed channels. 0 is dummy */
-	// FIXME: remeber to default to a basic channel plan depending of the PHY type
+	// FIXME: remember to default to a basic channel plan depending of the PHY type
 #ifdef ENABLE_DOT11D
 	void* pDot11dInfo;
 	bool bGlobalDomain;
@@ -2121,7 +2121,7 @@ struct ieee80211_device {
 	 * not set. As some cards may have different HW queues that
 	 * one might want to use for data and management frames
 	 * the option to have two callbacks might be useful.
-	 * This fucntion can't sleep.
+	 * This function can't sleep.
 	 */
 	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
 			       struct ieee80211_device *ieee80211);
@@ -2160,9 +2160,9 @@ struct ieee80211_device {
 	 * it is called in a work_queue when swithcing to ad-hoc mode
 	 * or in behalf of iwlist scan when the card is associated
 	 * and root user ask for a scan.
-	 * the fucntion stop_scan should stop both the syncro and
+	 * the function stop_scan should stop both the syncro and
 	 * background scanning and can sleep.
-	 * The fucntion start_scan should initiate the background
+	 * The function start_scan should initiate the background
 	 * scanning and can't sleep.
 	 */
 	void (*scan_syncro)(struct ieee80211_device *ieee80211);
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
index add015ebba1..ed5a3802309 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
@@ -1426,7 +1426,7 @@ int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
 
 /*
-* Make ther structure we read from the beacon packet has
+* Make the structure we read from the beacon packet to have
 * the right values
 */
 static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
index f6922d40a88..7d4cba3a7c1 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
@@ -2023,7 +2023,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 							return 1;
 						}
 						else
-						{	//filling the PeerHTCap. //maybe not neccesary as we can get its info from current_network.
+						{	//filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
 							memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
 							memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
 						}
@@ -2163,7 +2163,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 	return 0;
 }
 
-/* following are for a simplier TX queue management.
+/* following are for a simpler TX queue management.
  * Instead of using netif_[stop/wake]_queue the driver
  * will uses these two function (plus a reset one), that
  * will internally uses the kernel netif_* and takes
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192e/ieee80211/rtl819x_HT.h
index f968817d073..56a120cf629 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_HT.h
@@ -64,7 +64,7 @@ typedef enum _HT_CHANNEL_WIDTH{
 }HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
 
 //
-// Represent Extention Channel Offset in HT Capabilities
+// Represent Extension Channel Offset in HT Capabilities
 // This is available only in 40Mhz mode.
 //
 typedef enum _HT_EXTCHNL_OFFSET{
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
index a2a4fe9dd9d..f7a9da3ec82 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
@@ -459,7 +459,7 @@ u8 HTIOTActIsForcedCTS2Self(struct ieee80211_device *ieee, struct ieee80211_netw
 /**
 * Function:	HTIOTActIsDisableMCS15
 *
-* Overview:	Check whether driver should declare capability of receving MCS15
+* Overview:	Check whether driver should declare capability of receiving MCS15
 *
 * Input:
 *			PADAPTER		Adapter,
@@ -496,7 +496,7 @@ bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
 /**
 * Function:	HTIOTActIsDisableMCSTwoSpatialStream
 *
-* Overview:	Check whether driver should declare capability of receving All 2 ss packets
+* Overview:	Check whether driver should declare capability of receiving All 2 ss packets
 *
 * Input:
 *			PADAPTER		Adapter,
@@ -1681,7 +1681,7 @@ void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidt
 	//if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
 	if (Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee)))
 	 {
-	 		// Handle Illegal extention channel offset!!
+	 		// Handle Illegal extension channel offset!!
 		if(ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
 			Offset = HT_EXTCHNL_OFFSET_NO_EXT;
 		if(Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
@@ -1698,7 +1698,7 @@ void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidt
 
 	pHTInfo->bSwBwInProgress = true;
 
-	// TODO: 2007.7.13 by Emily Wait 2000ms  in order to garantee that switching
+	// TODO: 2007.7.13 by Emily Wait 2000ms  in order to guarantee that switching
 	//   bandwidth is executed after scan is finished. It is a temporal solution
 	//   because software should ganrantee the last operation of switching bandwidth
 	//   is executed properlly.
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_TS.h b/drivers/staging/rtl8192e/ieee80211/rtl819x_TS.h
index baaac2149de..e7e26fd9639 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_TS.h
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_TS.h
@@ -44,7 +44,7 @@ typedef struct _RX_TS_RECORD {
 	u16				RxTimeoutIndicateSeq;
 	struct list_head		RxPendingPktList;
 	struct timer_list		RxPktPendingTimer;
-	BA_RECORD			RxAdmittedBARecord;	 // For BA Recepient
+	BA_RECORD			RxAdmittedBARecord;	 // For BA Recipient
 	u16				RxLastSeqNum;
 	u8				RxLastFragNum;
 	u8				num;
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_TSProc.c
index 29eecf0ab76..ad6872dcf1c 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_TSProc.c
@@ -135,7 +135,7 @@ void ResetRxTsEntry(PRX_TS_RECORD pTS)
 	ResetTsCommonInfo(&pTS->TsCommonInfo);
 	pTS->RxIndicateSeq = 0xffff; // This indicate the RxIndicateSeq is not used now!!
 	pTS->RxTimeoutIndicateSeq = 0xffff; // This indicate the RxTimeoutIndicateSeq is not used now!!
-	ResetBaEntry(&pTS->RxAdmittedBARecord);	  // For BA Recepient
+	ResetBaEntry(&pTS->RxAdmittedBARecord);	  // For BA Recipient
 }
 
 void TSInitialize(struct ieee80211_device *ieee)
diff --git a/drivers/staging/rtl8192e/r819xE_phy.c b/drivers/staging/rtl8192e/r819xE_phy.c
index dfa4e112ef4..9e7828ef1cb 100644
--- a/drivers/staging/rtl8192e/r819xE_phy.c
+++ b/drivers/staging/rtl8192e/r819xE_phy.c
@@ -2032,13 +2032,13 @@ void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv)
 	{
 		case HT_CHANNEL_WIDTH_20:
 			regBwOpMode |= BW_OPMODE_20MHZ;
-		       // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+		       // 2007/02/07 Mark by Emily because we have not verify whether this register works
 			write_nic_byte(priv, BW_OPMODE, regBwOpMode);
 			break;
 
 		case HT_CHANNEL_WIDTH_20_40:
 			regBwOpMode &= ~BW_OPMODE_20MHZ;
-        		// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+        		// 2007/02/07 Mark by Emily because we have not verify whether this register works
 			write_nic_byte(priv, BW_OPMODE, regBwOpMode);
 			break;
 
@@ -2116,7 +2116,7 @@ void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv)
 }
 
 /******************************************************************************
- *function:  This function schedules bandwith switch work.
+ *function:  This function schedules bandwidth switch work.
  *   input:  struct net_device *dev
  *   	     HT_CHANNEL_WIDTH	Bandwidth  //20M or 40M
  *   	     HT_EXTCHNL_OFFSET Offset 	   //Upper, Lower, or Don't care
diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 28969198e7e..3f055091b35 100644
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -1,6 +1,7 @@
 config RTL8192U
 	tristate "RealTek RTL8192U Wireless LAN NIC driver"
 	depends on PCI && WLAN && USB
+	depends on m
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select CRYPTO
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index c0b844d75c0..e716f7b1144 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -1965,7 +1965,7 @@ struct ieee80211_device {
 	u16 prev_seq_ctl;       /* used to drop duplicate frames */
 
 	/* map of allowed channels. 0 is dummy */
-	// FIXME: remeber to default to a basic channel plan depending of the PHY type
+	// FIXME: remember to default to a basic channel plan depending of the PHY type
 	void* pDot11dInfo;
 	bool bGlobalDomain;
 	int rate;       /* current rate */
@@ -2119,7 +2119,7 @@ struct ieee80211_device {
 	 * not set. As some cards may have different HW queues that
 	 * one might want to use for data and management frames
 	 * the option to have two callbacks might be useful.
-	 * This fucntion can't sleep.
+	 * This function can't sleep.
 	 */
 	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
 			       struct net_device *dev);
@@ -2158,9 +2158,9 @@ struct ieee80211_device {
 	 * it is called in a work_queue when swithcing to ad-hoc mode
 	 * or in behalf of iwlist scan when the card is associated
 	 * and root user ask for a scan.
-	 * the fucntion stop_scan should stop both the syncro and
+	 * the function stop_scan should stop both the syncro and
 	 * background scanning and can sleep.
-	 * The fucntion start_scan should initiate the background
+	 * The function start_scan should initiate the background
 	 * scanning and can't sleep.
 	 */
 	void (*scan_syncro)(struct net_device *dev);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 498b520efcf..a414303aef5 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -1399,7 +1399,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
 
 /*
-* Make ther structure we read from the beacon packet has
+* Make the structure we read from the beacon packet to have
 * the right values
 */
 static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 4992d630f98..4ec0a6520dd 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -1973,7 +1973,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 							return 1;
 						}
 						else
-						{	//filling the PeerHTCap. //maybe not neccesary as we can get its info from current_network.
+						{	//filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
 							memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
 							memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
 						}
@@ -2113,7 +2113,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 	return 0;
 }
 
-/* following are for a simplier TX queue management.
+/* following are for a simpler TX queue management.
  * Instead of using netif_[stop/wake]_queue the driver
  * will uses these two function (plus a reset one), that
  * will internally uses the kernel netif_* and takes
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index cde603f67f4..0b1a1fc0939 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -64,7 +64,7 @@ typedef enum _HT_CHANNEL_WIDTH{
 }HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
 
 //
-// Represent Extention Channel Offset in HT Capabilities
+// Represent Extension Channel Offset in HT Capabilities
 // This is available only in 40Mhz mode.
 //
 typedef enum _HT_EXTCHNL_OFFSET{
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 50f4f5943e7..e88a839b2a9 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -423,7 +423,7 @@ u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr)
 /**
 * Function:	HTIOTActIsDisableMCS15
 *
-* Overview:	Check whether driver should declare capability of receving MCS15
+* Overview:	Check whether driver should declare capability of receiving MCS15
 *
 * Input:
 *			PADAPTER		Adapter,
@@ -460,7 +460,7 @@ bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
 /**
 * Function:	HTIOTActIsDisableMCSTwoSpatialStream
 *
-* Overview:	Check whether driver should declare capability of receving All 2 ss packets
+* Overview:	Check whether driver should declare capability of receiving All 2 ss packets
 *
 * Input:
 *			PADAPTER		Adapter,
@@ -1409,7 +1409,7 @@ void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidt
 	//if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
 	if(Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)))
 	 {
-			// Handle Illegal extention channel offset!!
+			// Handle Illegal extension channel offset!!
 		if(ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
 			Offset = HT_EXTCHNL_OFFSET_NO_EXT;
 		if(Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
@@ -1426,7 +1426,7 @@ void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidt
 
 	pHTInfo->bSwBwInProgress = true;
 
-	// TODO: 2007.7.13 by Emily Wait 2000ms  in order to garantee that switching
+	// TODO: 2007.7.13 by Emily Wait 2000ms  in order to guarantee that switching
 	//   bandwidth is executed after scan is finished. It is a temporal solution
 	//   because software should ganrantee the last operation of switching bandwidth
 	//   is executed properlly.
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h
index baaac2149de..e7e26fd9639 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h
@@ -44,7 +44,7 @@ typedef struct _RX_TS_RECORD {
 	u16				RxTimeoutIndicateSeq;
 	struct list_head		RxPendingPktList;
 	struct timer_list		RxPktPendingTimer;
-	BA_RECORD			RxAdmittedBARecord;	 // For BA Recepient
+	BA_RECORD			RxAdmittedBARecord;	 // For BA Recipient
 	u16				RxLastSeqNum;
 	u8				RxLastFragNum;
 	u8				num;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index c3fcaae0750..957ce4ef48b 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -135,7 +135,7 @@ void ResetRxTsEntry(PRX_TS_RECORD pTS)
 	ResetTsCommonInfo(&pTS->TsCommonInfo);
 	pTS->RxIndicateSeq = 0xffff; // This indicate the RxIndicateSeq is not used now!!
 	pTS->RxTimeoutIndicateSeq = 0xffff; // This indicate the RxTimeoutIndicateSeq is not used now!!
-	ResetBaEntry(&pTS->RxAdmittedBARecord);	  // For BA Recepient
+	ResetBaEntry(&pTS->RxAdmittedBARecord);	  // For BA Recipient
 }
 
 void TSInitialize(struct ieee80211_device *ieee)
diff --git a/drivers/staging/rtl8192u/ieee80211/scatterwalk.c b/drivers/staging/rtl8192u/ieee80211/scatterwalk.c
index 49f401fbce8..3543a614504 100644
--- a/drivers/staging/rtl8192u/ieee80211/scatterwalk.c
+++ b/drivers/staging/rtl8192u/ieee80211/scatterwalk.c
@@ -71,7 +71,7 @@ static void scatterwalk_pagedone(struct scatter_walk *walk, int out,
 				 unsigned int more)
 {
 	/* walk->data may be pointing the first byte of the next page;
-	   however, we know we transfered at least one byte.  So,
+	   however, we know we transferred at least one byte.  So,
 	   walk->data - 1 will be a virtual address in the mapped page. */
 
 	if (out)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index da612e6d994..e81b8ab6aa9 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -460,7 +460,7 @@ u32 read_nic_dword(struct net_device *dev, int indx)
 /* u8 read_phy_cck(struct net_device *dev, u8 adr); */
 /* u8 read_phy_ofdm(struct net_device *dev, u8 adr); */
 /* this might still called in what was the PHY rtl8185/rtl8192 common code
- * plans are to possibilty turn it again in one common code...
+ * plans are to possibility turn it again in one common code...
  */
 inline void force_pci_posting(struct net_device *dev)
 {
@@ -1378,7 +1378,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
 		//tx_agg_desc->LINIP = 0;
 		//tx_agg_desc->CmdInit = 1;
 		tx_agg_desc->Offset =  sizeof(tx_fwinfo_819x_usb) + 8;
-		/* already raw data, need not to substract header length */
+		/* already raw data, need not to subtract header length */
 		tx_agg_desc->PktSize = skb->len & 0xffff;
 
 		/*DWORD 1*/
@@ -2888,7 +2888,7 @@ static void rtl8192_get_eeprom_size(struct net_device* dev)
 	RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __FUNCTION__, priv->epromtype);
 }
 
-//used to swap endian. as ntohl & htonl are not neccessary to swap endian, so use this instead.
+//used to swap endian. as ntohl & htonl are not necessary to swap endian, so use this instead.
 static inline u16 endian_swap(u16* data)
 {
 	u16 tmp = *data;
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h
index 01f58b90202..2ac421626e7 100644
--- a/drivers/staging/rtl8192u/r819xU_HTType.h
+++ b/drivers/staging/rtl8192u/r819xU_HTType.h
@@ -65,7 +65,7 @@ typedef enum _HT_CHANNEL_WIDTH{
 }HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
 
 //
-// Represent Extention Channel Offset in HT Capabilities
+// Represent Extension Channel Offset in HT Capabilities
 // This is available only in 40Mhz mode.
 //
 typedef enum _HT_EXTCHNL_OFFSET{
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 41684e8fcf4..c4586b0817d 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -1531,13 +1531,13 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 	{
 		case HT_CHANNEL_WIDTH_20:
 			regBwOpMode |= BW_OPMODE_20MHZ;
-		       // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+		       // 2007/02/07 Mark by Emily because we have not verify whether this register works
 			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
 			break;
 
 		case HT_CHANNEL_WIDTH_20_40:
 			regBwOpMode &= ~BW_OPMODE_20MHZ;
-			// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+			// 2007/02/07 Mark by Emily because we have not verify whether this register works
 			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
 			break;
 
@@ -1647,7 +1647,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 }
 
 /******************************************************************************
- *function:  This function schedules bandwith switch work.
+ *function:  This function schedules bandwidth switch work.
  *   input:  struct net_device *dev
  *   	     HT_CHANNEL_WIDTH	Bandwidth  //20M or 40M
  *   	     HT_EXTCHNL_OFFSET Offset 	   //Upper, Lower, or Don't care
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h
index 3a945b5f0e0..2dc78476b7d 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.h
+++ b/drivers/staging/rtl8712/rtl871x_cmd.h
@@ -656,7 +656,7 @@ struct PT_param {
 /*
  * Result:
  * 0x00: success
- * 0x01: sucess, and check Response.
+ * 0x01: success, and check Response.
  * 0x02: cmd ignored due to duplicated sequcne number
  * 0x03: cmd dropped due to invalid cmd code
  * 0x04: reserved.
diff --git a/drivers/staging/rtl8712/rtl871x_led.h b/drivers/staging/rtl8712/rtl871x_led.h
index 994ef82141a..8085e5eb82b 100644
--- a/drivers/staging/rtl8712/rtl871x_led.h
+++ b/drivers/staging/rtl8712/rtl871x_led.h
@@ -78,14 +78,14 @@ struct LED_871x {
 };
 
 struct led_priv {
-	/* add for led controll */
+	/* add for led control */
 	struct LED_871x		SwLed0;
 	struct LED_871x		SwLed1;
 	enum LED_STRATEGY_871x	LedStrategy;
 	u8			bRegUseLed;
 	void (*LedControlHandler)(struct _adapter *padapter,
 				  enum LED_CTL_MODE LedAction);
-	/* add for led controll */
+	/* add for led control */
 };
 
 /*===========================================================================
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.c b/drivers/staging/rtl8712/rtl871x_mlme.c
index 98ba7602e25..866554d48d8 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.c
+++ b/drivers/staging/rtl8712/rtl871x_mlme.c
@@ -1663,7 +1663,7 @@ void r8712_update_registrypriv_dev_network(struct _adapter *adapter)
 			      (struct ndis_wlan_bssid_ex *)pdev_network);
 }
 
-/*the fucntion is at passive_level*/
+/*the function is at passive_level*/
 void r8712_joinbss_reset(struct _adapter *padapter)
 {
 	int i;
@@ -1726,7 +1726,7 @@ unsigned int r8712_restructure_ht_ie(struct _adapter *padapter, u8 *in_ie,
 	return phtpriv->ht_option;
 }
 
-/* the fucntion is > passive_level (in critical_section) */
+/* the function is > passive_level (in critical_section) */
 static void update_ht_cap(struct _adapter *padapter, u8 *pie, uint ie_len)
 {
 	u8 *p, max_ampdu_sz;
@@ -1803,7 +1803,7 @@ void r8712_issue_addbareq_cmd(struct _adapter *padapter, int priority)
 	}
 }
 
-/*the fucntion is >= passive_level*/
+/*the function is >= passive_level*/
 unsigned int r8712_add_ht_addt_info(struct _adapter *padapter,
 			      u8 *in_ie, u8 *out_ie,
 			      uint in_len, uint *pout_len)
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.h b/drivers/staging/rtl8712/rtl871x_mlme.h
index 2b35b740ab8..2794804d082 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.h
+++ b/drivers/staging/rtl8712/rtl871x_mlme.h
@@ -29,7 +29,7 @@
 						 *  single-tone*/
 #define	WIFI_MP_CTX_BACKGROUND_PENDING	0x00080000 /* pending in cont, tx
 					* background due to out of skb*/
-#define	WIFI_MP_CTX_CCK_HW	0x00100000	/* in continous tx*/
+#define	WIFI_MP_CTX_CCK_HW	0x00100000	/* in continuous tx*/
 #define	WIFI_MP_CTX_CCK_CS	0x00200000	/* in cont, tx with carrier
 						 * suppression*/
 #define   WIFI_MP_LPBK_STATE	0x00400000
diff --git a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
index e386fb0aac3..23532a79385 100644
--- a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
+++ b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
@@ -38,7 +38,7 @@
  * 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
  * 3. RF register 0x00-2E
  * 4. Bit Mask for BB/RF register
- * 5. Other defintion for BB/RF R/W
+ * 5. Other definition for BB/RF R/W
  *
  * 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
  * 1. Page1(0x100)
diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c
index 0e9483bbabe..46287c17a41 100644
--- a/drivers/staging/rtl8712/usb_halinit.c
+++ b/drivers/staging/rtl8712/usb_halinit.c
@@ -112,7 +112,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
 		/* Initialization for power on sequence, */
 		r8712_write8(padapter, SPS0_CTRL + 1, 0x53);
 		r8712_write8(padapter, SPS0_CTRL, 0x57);
-		/* Enable AFE Macro Block's Bandgap adn Enable AFE Macro
+		/* Enable AFE Macro Block's Bandgap and Enable AFE Macro
 		 * Block's Mbias
 		 */
 		val8 = r8712_read8(padapter, AFE_MISC);
diff --git a/drivers/staging/rts_pstor/debug.h b/drivers/staging/rts_pstor/debug.h
index e1408b0e7ae..ab305be96fb 100644
--- a/drivers/staging/rts_pstor/debug.h
+++ b/drivers/staging/rts_pstor/debug.h
@@ -28,7 +28,7 @@
 
 #define RTSX_STOR "rts_pstor: "
 
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 #define RTSX_DEBUGP(x...) printk(KERN_DEBUG RTSX_STOR x)
 #define RTSX_DEBUGPN(x...) printk(KERN_DEBUG x)
 #define RTSX_DEBUGPX(x...) printk(x)
diff --git a/drivers/staging/rts_pstor/ms.c b/drivers/staging/rts_pstor/ms.c
index 810e170894f..d89795c6a3a 100644
--- a/drivers/staging/rts_pstor/ms.c
+++ b/drivers/staging/rts_pstor/ms.c
@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"
diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c
index 4514419a5fb..02525d57ba8 100644
--- a/drivers/staging/rts_pstor/rtsx.c
+++ b/drivers/staging/rts_pstor/rtsx.c
@@ -824,13 +824,13 @@ static void rtsx_init_options(struct rtsx_chip *chip)
 	chip->fpga_ms_hg_clk = CLK_80;
 	chip->fpga_ms_4bit_clk = CLK_80;
 	chip->fpga_ms_1bit_clk = CLK_40;
-	chip->asic_sd_sdr104_clk = 207;
-	chip->asic_sd_sdr50_clk = 99;
-	chip->asic_sd_ddr50_clk = 99;
-	chip->asic_sd_hs_clk = 99;
-	chip->asic_mmc_52m_clk = 99;
-	chip->asic_ms_hg_clk = 119;
-	chip->asic_ms_4bit_clk = 79;
+	chip->asic_sd_sdr104_clk = 203;
+	chip->asic_sd_sdr50_clk = 98;
+	chip->asic_sd_ddr50_clk = 98;
+	chip->asic_sd_hs_clk = 98;
+	chip->asic_mmc_52m_clk = 98;
+	chip->asic_ms_hg_clk = 117;
+	chip->asic_ms_4bit_clk = 78;
 	chip->asic_ms_1bit_clk = 39;
 	chip->ssc_depth_sd_sdr104 = SSC_DEPTH_2M;
 	chip->ssc_depth_sd_sdr50 = SSC_DEPTH_2M;
diff --git a/drivers/staging/rts_pstor/rtsx_chip.c b/drivers/staging/rts_pstor/rtsx_chip.c
index f443d97a56f..4e60780ea80 100644
--- a/drivers/staging/rts_pstor/rtsx_chip.c
+++ b/drivers/staging/rts_pstor/rtsx_chip.c
@@ -24,6 +24,7 @@
 #include <linux/kthread.h>
 #include <linux/sched.h>
 #include <linux/workqueue.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"
@@ -684,6 +685,11 @@ static int rts5209_init(struct rtsx_chip *chip)
 	RTSX_DEBUGP("dw in 0x724: 0x%x\n", lval);
 	val = (u8)lval;
 	if (!(val & 0x80)) {
+		if (val & 0x08)
+			chip->lun_mode = DEFAULT_SINGLE;
+		else
+			chip->lun_mode = SD_MS_2LUN;
+
 		if (val & 0x04) {
 			SET_SDIO_EXIST(chip);
 		} else {
@@ -705,12 +711,6 @@ static int rts5209_init(struct rtsx_chip *chip)
 
 		chip->aspm_l0s_l1_en = (val >> 5) & 0x03;
 
-		if (val & 0x08) {
-			chip->lun_mode = DEFAULT_SINGLE;
-		} else {
-			chip->lun_mode = SD_MS_2LUN;
-		}
-
 		val = (u8)(lval >> 8);
 
 		clk = (val >> 5) & 0x07;
@@ -1312,11 +1312,11 @@ void rtsx_polling_func(struct rtsx_chip *chip)
 
 #ifdef SUPPORT_OCP
 	if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
-		#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 		if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER | MS_OC_NOW | MS_OC_EVER)) {
 			RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
 		}
-		#endif
+#endif
 
 		if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
 			if (chip->card_exist & SD_CARD) {
diff --git a/drivers/staging/rts_pstor/rtsx_chip.h b/drivers/staging/rts_pstor/rtsx_chip.h
index 713c5eaadac..9f7cd82a154 100644
--- a/drivers/staging/rts_pstor/rtsx_chip.h
+++ b/drivers/staging/rts_pstor/rtsx_chip.h
@@ -180,8 +180,8 @@
 #define CUR_ERR                 0x70    /* current error                    */
 #define DEF_ERR                 0x71    /* specific command error           */
 
-/*---- sense key Infomation ----*/
-#define SNSKEYINFO_LEN          3       /* length of sense key infomation   */
+/*---- sense key Information ----*/
+#define SNSKEYINFO_LEN          3       /* length of sense key information   */
 
 #define SKSV                    0x80
 #define CDB_ILLEGAL             0x40
@@ -235,13 +235,13 @@ struct sense_data_t {
     unsigned char   seg_no;		/* segment No.                      */
     unsigned char   sense_key;		/* byte5 : ILI                      */
 						/* bit3-0 : sense key              */
-    unsigned char   info[4];		/* infomation                       */
+    unsigned char   info[4];		/* information                       */
     unsigned char   ad_sense_len;	/* additional sense data length     */
-    unsigned char   cmd_info[4];	/* command specific infomation      */
+    unsigned char   cmd_info[4];	/* command specific information      */
     unsigned char   asc;		/* ASC                              */
     unsigned char   ascq;		/* ASCQ                             */
     unsigned char   rfu;		/* FRU                              */
-    unsigned char   sns_key_info[3];	/* sense key specific infomation    */
+    unsigned char   sns_key_info[3];	/* sense key specific information    */
 };
 
 /* PCI Operation Register Address */
diff --git a/drivers/staging/rts_pstor/rtsx_scsi.c b/drivers/staging/rts_pstor/rtsx_scsi.c
index 20c2464a20f..7de1fae443f 100644
--- a/drivers/staging/rts_pstor/rtsx_scsi.c
+++ b/drivers/staging/rts_pstor/rtsx_scsi.c
@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"
diff --git a/drivers/staging/rts_pstor/rtsx_scsi.h b/drivers/staging/rts_pstor/rtsx_scsi.h
index fac122c1eab..64b84992fdb 100644
--- a/drivers/staging/rts_pstor/rtsx_scsi.h
+++ b/drivers/staging/rts_pstor/rtsx_scsi.h
@@ -85,7 +85,7 @@
 #define CHIP_NORMALMODE		0x00
 #define CHIP_DEBUGMODE		0x01
 
-/* SD Pass Through Command Extention */
+/* SD Pass Through Command Extension */
 #define SD_PASS_THRU_MODE	0xD0
 #define SD_EXECUTE_NO_DATA	0xD1
 #define SD_EXECUTE_READ		0xD2
diff --git a/drivers/staging/rts_pstor/sd.c b/drivers/staging/rts_pstor/sd.c
index 21bfa5755be..b1277a6c7a8 100644
--- a/drivers/staging/rts_pstor/sd.c
+++ b/drivers/staging/rts_pstor/sd.c
@@ -909,7 +909,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
 		RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
 		RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
 	} else {
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 		rtsx_read_register(chip, SD_VP_CTL, &val);
 		RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
 		rtsx_read_register(chip, SD_DCMPS_CTL, &val);
@@ -958,7 +958,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
 	return STATUS_SUCCESS;
 
 Fail:
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 	rtsx_read_register(chip, SD_VP_CTL, &val);
 	RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
 	rtsx_read_register(chip, SD_DCMPS_CTL, &val);
@@ -1719,7 +1719,7 @@ static u8 sd_search_final_phase(struct rtsx_chip *chip, u32 phase_map, u8 tune_d
 	}
 
 Search_Finish:
-	RTSX_DEBUGP("Final choosen phase: %d\n", final_phase);
+	RTSX_DEBUGP("Final chosen phase: %d\n", final_phase);
 	return final_phase;
 }
 
diff --git a/drivers/staging/rts_pstor/trace.h b/drivers/staging/rts_pstor/trace.h
index 2c668bae6ff..bc83b49a4eb 100644
--- a/drivers/staging/rts_pstor/trace.h
+++ b/drivers/staging/rts_pstor/trace.h
@@ -82,7 +82,7 @@ do {													\
 #define TRACE_GOTO(chip, label)	goto label
 #endif
 
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 static inline void rtsx_dump(u8 *buf, int buf_len)
 {
 	int i;
diff --git a/drivers/staging/rts_pstor/xd.c b/drivers/staging/rts_pstor/xd.c
index 7bcd468b8f2..9f3add1e8f5 100644
--- a/drivers/staging/rts_pstor/xd.c
+++ b/drivers/staging/rts_pstor/xd.c
@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"
diff --git a/drivers/staging/samsung-laptop/Kconfig b/drivers/staging/samsung-laptop/Kconfig
deleted file mode 100644
index f27c60864c2..00000000000
--- a/drivers/staging/samsung-laptop/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config SAMSUNG_LAPTOP
-	tristate "Samsung Laptop driver"
-	default n
-	depends on RFKILL && BACKLIGHT_CLASS_DEVICE && X86
-	help
-	  This module implements a driver for the N128 Samsung Laptop
-	  providing control over the Wireless LED and the LCD backlight
-
-	  To compile this driver as a module, choose
-	  M here: the module will be called samsung-laptop.
diff --git a/drivers/staging/samsung-laptop/Makefile b/drivers/staging/samsung-laptop/Makefile
deleted file mode 100644
index 3c6f4204521..00000000000
--- a/drivers/staging/samsung-laptop/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_SAMSUNG_LAPTOP)	+= samsung-laptop.o
diff --git a/drivers/staging/samsung-laptop/TODO b/drivers/staging/samsung-laptop/TODO
deleted file mode 100644
index f7a6d589916..00000000000
--- a/drivers/staging/samsung-laptop/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-TODO:
-	- review from other developers
-	- figure out ACPI video issues
-
-Please send patches to Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c
deleted file mode 100644
index 25294462b8b..00000000000
--- a/drivers/staging/samsung-laptop/samsung-laptop.c
+++ /dev/null
@@ -1,843 +0,0 @@
-/*
- * Samsung Laptop driver
- *
- * Copyright (C) 2009,2011 Greg Kroah-Hartman (gregkh@suse.de)
- * Copyright (C) 2009,2011 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <linux/dmi.h>
-#include <linux/platform_device.h>
-#include <linux/rfkill.h>
-
-/*
- * This driver is needed because a number of Samsung laptops do not hook
- * their control settings through ACPI.  So we have to poke around in the
- * BIOS to do things like brightness values, and "special" key controls.
- */
-
-/*
- * We have 0 - 8 as valid brightness levels.  The specs say that level 0 should
- * be reserved by the BIOS (which really doesn't make much sense), we tell
- * userspace that the value is 0 - 7 and then just tell the hardware 1 - 8
- */
-#define MAX_BRIGHT	0x07
-
-
-#define SABI_IFACE_MAIN			0x00
-#define SABI_IFACE_SUB			0x02
-#define SABI_IFACE_COMPLETE		0x04
-#define SABI_IFACE_DATA			0x05
-
-/* Structure to get data back to the calling function */
-struct sabi_retval {
-	u8 retval[20];
-};
-
-struct sabi_header_offsets {
-	u8 port;
-	u8 re_mem;
-	u8 iface_func;
-	u8 en_mem;
-	u8 data_offset;
-	u8 data_segment;
-};
-
-struct sabi_commands {
-	/*
-	 * Brightness is 0 - 8, as described above.
-	 * Value 0 is for the BIOS to use
-	 */
-	u8 get_brightness;
-	u8 set_brightness;
-
-	/*
-	 * first byte:
-	 * 0x00 - wireless is off
-	 * 0x01 - wireless is on
-	 * second byte:
-	 * 0x02 - 3G is off
-	 * 0x03 - 3G is on
-	 * TODO, verify 3G is correct, that doesn't seem right...
-	 */
-	u8 get_wireless_button;
-	u8 set_wireless_button;
-
-	/* 0 is off, 1 is on */
-	u8 get_backlight;
-	u8 set_backlight;
-
-	/*
-	 * 0x80 or 0x00 - no action
-	 * 0x81 - recovery key pressed
-	 */
-	u8 get_recovery_mode;
-	u8 set_recovery_mode;
-
-	/*
-	 * on seclinux: 0 is low, 1 is high,
-	 * on swsmi: 0 is normal, 1 is silent, 2 is turbo
-	 */
-	u8 get_performance_level;
-	u8 set_performance_level;
-
-	/*
-	 * Tell the BIOS that Linux is running on this machine.
-	 * 81 is on, 80 is off
-	 */
-	u8 set_linux;
-};
-
-struct sabi_performance_level {
-	const char *name;
-	u8 value;
-};
-
-struct sabi_config {
-	const char *test_string;
-	u16 main_function;
-	const struct sabi_header_offsets header_offsets;
-	const struct sabi_commands commands;
-	const struct sabi_performance_level performance_levels[4];
-	u8 min_brightness;
-	u8 max_brightness;
-};
-
-static const struct sabi_config sabi_configs[] = {
-	{
-		.test_string = "SECLINUX",
-
-		.main_function = 0x4c49,
-
-		.header_offsets = {
-			.port = 0x00,
-			.re_mem = 0x02,
-			.iface_func = 0x03,
-			.en_mem = 0x04,
-			.data_offset = 0x05,
-			.data_segment = 0x07,
-		},
-
-		.commands = {
-			.get_brightness = 0x00,
-			.set_brightness = 0x01,
-
-			.get_wireless_button = 0x02,
-			.set_wireless_button = 0x03,
-
-			.get_backlight = 0x04,
-			.set_backlight = 0x05,
-
-			.get_recovery_mode = 0x06,
-			.set_recovery_mode = 0x07,
-
-			.get_performance_level = 0x08,
-			.set_performance_level = 0x09,
-
-			.set_linux = 0x0a,
-		},
-
-		.performance_levels = {
-			{
-				.name = "silent",
-				.value = 0,
-			},
-			{
-				.name = "normal",
-				.value = 1,
-			},
-			{ },
-		},
-		.min_brightness = 1,
-		.max_brightness = 8,
-	},
-	{
-		.test_string = "SwSmi@",
-
-		.main_function = 0x5843,
-
-		.header_offsets = {
-			.port = 0x00,
-			.re_mem = 0x04,
-			.iface_func = 0x02,
-			.en_mem = 0x03,
-			.data_offset = 0x05,
-			.data_segment = 0x07,
-		},
-
-		.commands = {
-			.get_brightness = 0x10,
-			.set_brightness = 0x11,
-
-			.get_wireless_button = 0x12,
-			.set_wireless_button = 0x13,
-
-			.get_backlight = 0x2d,
-			.set_backlight = 0x2e,
-
-			.get_recovery_mode = 0xff,
-			.set_recovery_mode = 0xff,
-
-			.get_performance_level = 0x31,
-			.set_performance_level = 0x32,
-
-			.set_linux = 0xff,
-		},
-
-		.performance_levels = {
-			{
-				.name = "normal",
-				.value = 0,
-			},
-			{
-				.name = "silent",
-				.value = 1,
-			},
-			{
-				.name = "overclock",
-				.value = 2,
-			},
-			{ },
-		},
-		.min_brightness = 0,
-		.max_brightness = 8,
-	},
-	{ },
-};
-
-static const struct sabi_config *sabi_config;
-
-static void __iomem *sabi;
-static void __iomem *sabi_iface;
-static void __iomem *f0000_segment;
-static struct backlight_device *backlight_device;
-static struct mutex sabi_mutex;
-static struct platform_device *sdev;
-static struct rfkill *rfk;
-
-static int force;
-module_param(force, bool, 0);
-MODULE_PARM_DESC(force,
-		"Disable the DMI check and forces the driver to be loaded");
-
-static int debug;
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-static int sabi_get_command(u8 command, struct sabi_retval *sretval)
-{
-	int retval = 0;
-	u16 port = readw(sabi + sabi_config->header_offsets.port);
-	u8 complete, iface_data;
-
-	mutex_lock(&sabi_mutex);
-
-	/* enable memory to be able to write to it */
-	outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
-
-	/* write out the command */
-	writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
-	writew(command, sabi_iface + SABI_IFACE_SUB);
-	writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
-	outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
-
-	/* write protect memory to make it safe */
-	outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
-
-	/* see if the command actually succeeded */
-	complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
-	iface_data = readb(sabi_iface + SABI_IFACE_DATA);
-	if (complete != 0xaa || iface_data == 0xff) {
-		pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
-		        command, complete, iface_data);
-		retval = -EINVAL;
-		goto exit;
-	}
-	/*
-	 * Save off the data into a structure so the caller use it.
-	 * Right now we only want the first 4 bytes,
-	 * There are commands that need more, but not for the ones we
-	 * currently care about.
-	 */
-	sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA);
-	sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1);
-	sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2);
-	sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3);
-
-exit:
-	mutex_unlock(&sabi_mutex);
-	return retval;
-
-}
-
-static int sabi_set_command(u8 command, u8 data)
-{
-	int retval = 0;
-	u16 port = readw(sabi + sabi_config->header_offsets.port);
-	u8 complete, iface_data;
-
-	mutex_lock(&sabi_mutex);
-
-	/* enable memory to be able to write to it */
-	outb(readb(sabi + sabi_config->header_offsets.en_mem), port);
-
-	/* write out the command */
-	writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN);
-	writew(command, sabi_iface + SABI_IFACE_SUB);
-	writeb(0, sabi_iface + SABI_IFACE_COMPLETE);
-	writeb(data, sabi_iface + SABI_IFACE_DATA);
-	outb(readb(sabi + sabi_config->header_offsets.iface_func), port);
-
-	/* write protect memory to make it safe */
-	outb(readb(sabi + sabi_config->header_offsets.re_mem), port);
-
-	/* see if the command actually succeeded */
-	complete = readb(sabi_iface + SABI_IFACE_COMPLETE);
-	iface_data = readb(sabi_iface + SABI_IFACE_DATA);
-	if (complete != 0xaa || iface_data == 0xff) {
-		pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n",
-		       command, complete, iface_data);
-		retval = -EINVAL;
-	}
-
-	mutex_unlock(&sabi_mutex);
-	return retval;
-}
-
-static void test_backlight(void)
-{
-	struct sabi_retval sretval;
-
-	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
-	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-
-	sabi_set_command(sabi_config->commands.set_backlight, 0);
-	printk(KERN_DEBUG "backlight should be off\n");
-
-	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
-	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-
-	msleep(1000);
-
-	sabi_set_command(sabi_config->commands.set_backlight, 1);
-	printk(KERN_DEBUG "backlight should be on\n");
-
-	sabi_get_command(sabi_config->commands.get_backlight, &sretval);
-	printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]);
-}
-
-static void test_wireless(void)
-{
-	struct sabi_retval sretval;
-
-	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
-	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-
-	sabi_set_command(sabi_config->commands.set_wireless_button, 0);
-	printk(KERN_DEBUG "wireless led should be off\n");
-
-	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
-	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-
-	msleep(1000);
-
-	sabi_set_command(sabi_config->commands.set_wireless_button, 1);
-	printk(KERN_DEBUG "wireless led should be on\n");
-
-	sabi_get_command(sabi_config->commands.get_wireless_button, &sretval);
-	printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]);
-}
-
-static u8 read_brightness(void)
-{
-	struct sabi_retval sretval;
-	int user_brightness = 0;
-	int retval;
-
-	retval = sabi_get_command(sabi_config->commands.get_brightness,
-				  &sretval);
-	if (!retval) {
-		user_brightness = sretval.retval[0];
-		if (user_brightness != 0)
-			user_brightness -= sabi_config->min_brightness;
-	}
-	return user_brightness;
-}
-
-static void set_brightness(u8 user_brightness)
-{
-	u8 user_level = user_brightness - sabi_config->min_brightness;
-
-	sabi_set_command(sabi_config->commands.set_brightness, user_level);
-}
-
-static int get_brightness(struct backlight_device *bd)
-{
-	return (int)read_brightness();
-}
-
-static int update_status(struct backlight_device *bd)
-{
-	set_brightness(bd->props.brightness);
-
-	if (bd->props.power == FB_BLANK_UNBLANK)
-		sabi_set_command(sabi_config->commands.set_backlight, 1);
-	else
-		sabi_set_command(sabi_config->commands.set_backlight, 0);
-	return 0;
-}
-
-static const struct backlight_ops backlight_ops = {
-	.get_brightness	= get_brightness,
-	.update_status	= update_status,
-};
-
-static int rfkill_set(void *data, bool blocked)
-{
-	/* Do something with blocked...*/
-	/*
-	 * blocked == false is on
-	 * blocked == true is off
-	 */
-	if (blocked)
-		sabi_set_command(sabi_config->commands.set_wireless_button, 0);
-	else
-		sabi_set_command(sabi_config->commands.set_wireless_button, 1);
-
-	return 0;
-}
-
-static struct rfkill_ops rfkill_ops = {
-	.set_block = rfkill_set,
-};
-
-static int init_wireless(struct platform_device *sdev)
-{
-	int retval;
-
-	rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN,
-			   &rfkill_ops, NULL);
-	if (!rfk)
-		return -ENOMEM;
-
-	retval = rfkill_register(rfk);
-	if (retval) {
-		rfkill_destroy(rfk);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void destroy_wireless(void)
-{
-	rfkill_unregister(rfk);
-	rfkill_destroy(rfk);
-}
-
-static ssize_t get_performance_level(struct device *dev,
-				     struct device_attribute *attr, char *buf)
-{
-	struct sabi_retval sretval;
-	int retval;
-	int i;
-
-	/* Read the state */
-	retval = sabi_get_command(sabi_config->commands.get_performance_level,
-				  &sretval);
-	if (retval)
-		return retval;
-
-	/* The logic is backwards, yeah, lots of fun... */
-	for (i = 0; sabi_config->performance_levels[i].name; ++i) {
-		if (sretval.retval[0] == sabi_config->performance_levels[i].value)
-			return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name);
-	}
-	return sprintf(buf, "%s\n", "unknown");
-}
-
-static ssize_t set_performance_level(struct device *dev,
-				struct device_attribute *attr, const char *buf,
-				size_t count)
-{
-	if (count >= 1) {
-		int i;
-		for (i = 0; sabi_config->performance_levels[i].name; ++i) {
-			const struct sabi_performance_level *level =
-				&sabi_config->performance_levels[i];
-			if (!strncasecmp(level->name, buf, strlen(level->name))) {
-				sabi_set_command(sabi_config->commands.set_performance_level,
-						 level->value);
-				break;
-			}
-		}
-		if (!sabi_config->performance_levels[i].name)
-			return -EINVAL;
-	}
-	return count;
-}
-static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO,
-		   get_performance_level, set_performance_level);
-
-
-static int __init dmi_check_cb(const struct dmi_system_id *id)
-{
-	pr_info("found laptop model '%s'\n",
-		id->ident);
-	return 0;
-}
-
-static struct dmi_system_id __initdata samsung_dmi_table[] = {
-	{
-		.ident = "N128",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "N128"),
-			DMI_MATCH(DMI_BOARD_NAME, "N128"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "N130",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "N130"),
-			DMI_MATCH(DMI_BOARD_NAME, "N130"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "X125",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X125"),
-			DMI_MATCH(DMI_BOARD_NAME, "X125"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "X120/X170",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"),
-			DMI_MATCH(DMI_BOARD_NAME, "X120/X170"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "NC10",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
-			DMI_MATCH(DMI_BOARD_NAME, "NC10"),
-		},
-		.callback = dmi_check_cb,
-	},
-		{
-		.ident = "NP-Q45",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
-			DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"),
-		},
-		.callback = dmi_check_cb,
-		},
-	{
-		.ident = "X360",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X360"),
-			DMI_MATCH(DMI_BOARD_NAME, "X360"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "R410 Plus",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "R410P"),
-			DMI_MATCH(DMI_BOARD_NAME, "R460"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "R518",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "R518"),
-			DMI_MATCH(DMI_BOARD_NAME, "R518"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "R519/R719",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"),
-			DMI_MATCH(DMI_BOARD_NAME, "R519/R719"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "N150/N210/N220/N230",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"),
-			DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "N150P/N210P/N220P",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"),
-			DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "R530/R730",
-		.matches = {
-		      DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		      DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"),
-		      DMI_MATCH(DMI_BOARD_NAME, "R530/R730"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "NF110/NF210/NF310",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"),
-			DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "N145P/N250P/N260P",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"),
-			DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "R70/R71",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR,
-					"SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"),
-			DMI_MATCH(DMI_BOARD_NAME, "R70/R71"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{
-		.ident = "P460",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "P460"),
-			DMI_MATCH(DMI_BOARD_NAME, "P460"),
-		},
-		.callback = dmi_check_cb,
-	},
-	{ },
-};
-MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);
-
-static int find_signature(void __iomem *memcheck, const char *testStr)
-{
-	int i = 0;
-	int loca;
-
-	for (loca = 0; loca < 0xffff; loca++) {
-		char temp = readb(memcheck + loca);
-
-		if (temp == testStr[i]) {
-			if (i == strlen(testStr)-1)
-				break;
-			++i;
-		} else {
-			i = 0;
-		}
-	}
-	return loca;
-}
-
-static int __init samsung_init(void)
-{
-	struct backlight_properties props;
-	struct sabi_retval sretval;
-	unsigned int ifaceP;
-	int i;
-	int loca;
-	int retval;
-
-	mutex_init(&sabi_mutex);
-
-	if (!force && !dmi_check_system(samsung_dmi_table))
-		return -ENODEV;
-
-	f0000_segment = ioremap_nocache(0xf0000, 0xffff);
-	if (!f0000_segment) {
-		pr_err("Can't map the segment at 0xf0000\n");
-		return -EINVAL;
-	}
-
-	/* Try to find one of the signatures in memory to find the header */
-	for (i = 0; sabi_configs[i].test_string != 0; ++i) {
-		sabi_config = &sabi_configs[i];
-		loca = find_signature(f0000_segment, sabi_config->test_string);
-		if (loca != 0xffff)
-			break;
-	}
-
-	if (loca == 0xffff) {
-		pr_err("This computer does not support SABI\n");
-		goto error_no_signature;
-	}
-
-	/* point to the SMI port Number */
-	loca += 1;
-	sabi = (f0000_segment + loca);
-
-	if (debug) {
-		printk(KERN_DEBUG "This computer supports SABI==%x\n",
-			loca + 0xf0000 - 6);
-		printk(KERN_DEBUG "SABI header:\n");
-		printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
-			readw(sabi + sabi_config->header_offsets.port));
-		printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
-			readb(sabi + sabi_config->header_offsets.iface_func));
-		printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
-			readb(sabi + sabi_config->header_offsets.en_mem));
-		printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
-			readb(sabi + sabi_config->header_offsets.re_mem));
-		printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
-			readw(sabi + sabi_config->header_offsets.data_offset));
-		printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
-			readw(sabi + sabi_config->header_offsets.data_segment));
-	}
-
-	/* Get a pointer to the SABI Interface */
-	ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4;
-	ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff;
-	sabi_iface = ioremap_nocache(ifaceP, 16);
-	if (!sabi_iface) {
-		pr_err("Can't remap %x\n", ifaceP);
-		goto exit;
-	}
-	if (debug) {
-		printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP);
-		printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface);
-
-		test_backlight();
-		test_wireless();
-
-		retval = sabi_get_command(sabi_config->commands.get_brightness,
-					  &sretval);
-		printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]);
-	}
-
-	/* Turn on "Linux" mode in the BIOS */
-	if (sabi_config->commands.set_linux != 0xff) {
-		retval = sabi_set_command(sabi_config->commands.set_linux,
-					  0x81);
-		if (retval) {
-			pr_warn("Linux mode was not set!\n");
-			goto error_no_platform;
-		}
-	}
-
-	/* knock up a platform device to hang stuff off of */
-	sdev = platform_device_register_simple("samsung", -1, NULL, 0);
-	if (IS_ERR(sdev))
-		goto error_no_platform;
-
-	/* create a backlight device to talk to this one */
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.type = BACKLIGHT_PLATFORM;
-	props.max_brightness = sabi_config->max_brightness;
-	backlight_device = backlight_device_register("samsung", &sdev->dev,
-						     NULL, &backlight_ops,
-						     &props);
-	if (IS_ERR(backlight_device))
-		goto error_no_backlight;
-
-	backlight_device->props.brightness = read_brightness();
-	backlight_device->props.power = FB_BLANK_UNBLANK;
-	backlight_update_status(backlight_device);
-
-	retval = init_wireless(sdev);
-	if (retval)
-		goto error_no_rfk;
-
-	retval = device_create_file(&sdev->dev, &dev_attr_performance_level);
-	if (retval)
-		goto error_file_create;
-
-exit:
-	return 0;
-
-error_file_create:
-	destroy_wireless();
-
-error_no_rfk:
-	backlight_device_unregister(backlight_device);
-
-error_no_backlight:
-	platform_device_unregister(sdev);
-
-error_no_platform:
-	iounmap(sabi_iface);
-
-error_no_signature:
-	iounmap(f0000_segment);
-	return -EINVAL;
-}
-
-static void __exit samsung_exit(void)
-{
-	/* Turn off "Linux" mode in the BIOS */
-	if (sabi_config->commands.set_linux != 0xff)
-		sabi_set_command(sabi_config->commands.set_linux, 0x80);
-
-	device_remove_file(&sdev->dev, &dev_attr_performance_level);
-	backlight_device_unregister(backlight_device);
-	destroy_wireless();
-	iounmap(sabi_iface);
-	iounmap(f0000_segment);
-	platform_device_unregister(sdev);
-}
-
-module_init(samsung_init);
-module_exit(samsung_exit);
-
-MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
-MODULE_DESCRIPTION("Samsung Backlight driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index 71a5fbc041e..890eede5e3f 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -55,8 +55,6 @@
 #include <linux/jiffies.h>
 #include <linux/rar_register.h>
 
-#include "../memrar/memrar.h"
-
 #include "sep_driver_hw_defs.h"
 #include "sep_driver_config.h"
 #include "sep_driver_api.h"
@@ -586,7 +584,7 @@ static unsigned int sep_poll(struct file *filp, poll_table *wait)
 	dev_dbg(&sep->pdev->dev, "poll: send_ct is %lx reply ct is %lx\n",
 		sep->send_ct, sep->reply_ct);
 
-	/* Check if error occured during poll */
+	/* Check if error occurred during poll */
 	retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
 	if (retval2 != 0x0) {
 		dev_warn(&sep->pdev->dev, "poll; poll error %x\n", retval2);
@@ -1106,7 +1104,7 @@ static int sep_lock_user_pages(struct sep_device *sep,
 			lli_array[count].block_size);
 	}
 
-	/* Set output params acording to the in_out flag */
+	/* Set output params according to the in_out flag */
 	if (in_out_flag == SEP_DRIVER_IN_FLAG) {
 		*lli_array_ptr = lli_array;
 		sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = num_pages;
@@ -1577,7 +1575,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
 
 		/*
 		 * If this is not the last table -
-		 * then allign it to the block size
+		 * then align it to the block size
 		 */
 		if (!last_table_flag)
 			table_data_size =
@@ -1974,7 +1972,7 @@ static int sep_prepare_input_output_dma_table(struct sep_device *sep,
 	dev_dbg(&sep->pdev->dev, "SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n",
 		SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
 
-	/* Call the fucntion that creates table from the lli arrays */
+	/* Call the function that creates table from the lli arrays */
 	error = sep_construct_dma_tables_from_lli(sep, lli_in_array,
 		sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages,
 		lli_out_array,
@@ -2372,7 +2370,6 @@ static int sep_rar_prepare_output_msg_handler(struct sep_device *sep,
 	int error = 0;
 	/* Command args */
 	struct rar_hndl_to_bus_struct command_args;
-	struct RAR_buffer rar_buf;
 	/* Bus address */
 	dma_addr_t  rar_bus = 0;
 	/* Holds the RAR address in the system memory offset */
@@ -2386,16 +2383,8 @@ static int sep_rar_prepare_output_msg_handler(struct sep_device *sep,
 	}
 
 	/* Call to translation function only if user handle is not NULL */
-	if (command_args.rar_handle) {
-		memset(&rar_buf, 0, sizeof(rar_buf));
-		rar_buf.info.handle = (u32)command_args.rar_handle;
-
-		if (rar_handle_to_bus(&rar_buf, 1) != 1) {
-			error = -EFAULT;
-			goto end_function;
-		}
-		rar_bus = rar_buf.bus_address;
-	}
+	if (command_args.rar_handle)
+		return -EOPNOTSUPP;
 	dev_dbg(&sep->pdev->dev, "rar msg; rar_addr_bus = %x\n", (u32)rar_bus);
 
 	/* Set value in the SYSTEM MEMORY offset */
@@ -2416,7 +2405,7 @@ end_function:
  *	@cmd: command
  *	@arg: pointer to argument structure
  *
- *	Implement the ioctl methods availble on the SEP device.
+ *	Implement the ioctl methods available on the SEP device.
  */
 static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h
index d3b9220f396..1033425c9c3 100644
--- a/drivers/staging/sep/sep_driver_config.h
+++ b/drivers/staging/sep/sep_driver_config.h
@@ -65,11 +65,11 @@
 #define SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE		16
 
 /* flag that signifies tah the lock is
-currently held by the proccess (struct file) */
+currently held by the process (struct file) */
 #define SEP_DRIVER_OWN_LOCK_FLAG                        1
 
 /* flag that signifies tah the lock is currently NOT
-held by the proccess (struct file) */
+held by the process (struct file) */
 #define SEP_DRIVER_DISOWN_LOCK_FLAG                     0
 
 /* indicates whether driver has mapped/unmapped shared area */
diff --git a/drivers/staging/slicoss/README b/drivers/staging/slicoss/README
index 70f49099c06..b83bba19b7f 100644
--- a/drivers/staging/slicoss/README
+++ b/drivers/staging/slicoss/README
@@ -33,7 +33,7 @@ TODO:
 	- NAPI?
 	- wasted overhead of extra stats
 	- state variables for things that are
-	  easily availble and shouldn't be kept in card structure, cardnum, ...
+	  easily available and shouldn't be kept in card structure, cardnum, ...
 	  slotnumber, events, ...
 	- get rid of slic_spinlock wrapper
 	- volatile == bad design => bad code
diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c
index d007e4a12c1..3e2230f0879 100644
--- a/drivers/staging/sm7xx/smtcfb.c
+++ b/drivers/staging/sm7xx/smtcfb.c
@@ -26,10 +26,6 @@
  *	Boyod.yang <boyod.yang@siliconmotion.com.cn>
  */
 
-#ifndef __KERNEL__
-#define __KERNEL__
-#endif
-
 #include <linux/io.h>
 #include <linux/fb.h>
 #include <linux/pci.h>
@@ -965,7 +961,7 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 		goto failed;
 
 	smtcfb_setmode(sfb);
-	/* Primary display starting from 0 postion */
+	/* Primary display starting from 0 position */
 	hw.BaseAddressInVRAM = 0;
 	sfb->fb.par = &hw;
 
@@ -1019,6 +1015,7 @@ static void __devexit smtcfb_pci_remove(struct pci_dev *pdev)
 	smtc_free_fb_info(sfb);
 }
 
+#ifdef CONFIG_PM
 /* Jason (08/14/2009)
  * suspend function, called when the suspend event is triggered
  */
@@ -1055,7 +1052,7 @@ static int __maybe_unused smtcfb_suspend(struct pci_dev *pdev, pm_message_t msg)
 
 	pdev->dev.power.power_state = msg;
 
-	/* additionaly turn off all function blocks including internal PLLs */
+	/* additionally turn off all function blocks including internal PLLs */
 	smtc_seqw(0x21, 0xff);
 
 	return 0;
@@ -1111,6 +1108,7 @@ static int __maybe_unused smtcfb_resume(struct pci_dev *pdev)
 
 	return 0;
 }
+#endif
 
 /* Jason (08/13/2009)
  * pci_driver struct used to wrap the original driver
diff --git a/drivers/staging/solo6x10/Kconfig b/drivers/staging/solo6x10/Kconfig
index 2cf77c94086..03dcac4ea4d 100644
--- a/drivers/staging/solo6x10/Kconfig
+++ b/drivers/staging/solo6x10/Kconfig
@@ -2,6 +2,7 @@ config SOLO6X10
 	tristate "Softlogic 6x10 MPEG codec cards"
 	depends on PCI && VIDEO_DEV && SND && I2C
 	select VIDEOBUF_DMA_SG
+	select SND_PCM
 	---help---
 	  This driver supports the Softlogic based MPEG-4 and h.264 codec
 	  codec cards.
diff --git a/drivers/staging/speakup/keyhelp.c b/drivers/staging/speakup/keyhelp.c
index 23cf7f44f45..170f38815ff 100644
--- a/drivers/staging/speakup/keyhelp.c
+++ b/drivers/staging/speakup/keyhelp.c
@@ -69,7 +69,7 @@ static void build_key_data(void)
 	memset(key_offsets, 0, sizeof(key_offsets));
 	kp = state_tbl + nstates + 1;
 	while (*kp++) {
-		/* count occurrances of each function */
+		/* count occurrences of each function */
 		for (i = 0; i < nstates; i++, kp++) {
 			if (!*kp)
 				continue;
diff --git a/drivers/staging/speakup/spkguide.txt b/drivers/staging/speakup/spkguide.txt
index 24362eb7b8f..f3210571e39 100644
--- a/drivers/staging/speakup/spkguide.txt
+++ b/drivers/staging/speakup/spkguide.txt
@@ -1091,7 +1091,7 @@ screen that is constantly changing, such as a clock or status line.
 
 There is no way to save these window settings, and you can only have one
 window defined for each virtual console.  There is also no way to have
-windows automaticly defined for specific applications.
+windows automatically defined for specific applications.
 
 In order to define a window, use the review keys to move your reading
 cursor to the beginning of the area you want to define.  Then press
diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c
index 007b24b54e2..506547b603e 100644
--- a/drivers/staging/spectra/ffsport.c
+++ b/drivers/staging/spectra/ffsport.c
@@ -38,7 +38,7 @@
 * Outputs:      Number of Used Bits
 *               0, if the argument is 0
 * Description:  Calculate the number of bits used by a given power of 2 number
-*               Number can be upto 32 bit
+*               Number can be up to 32 bit
 *&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
 int GLOB_Calc_Used_Bits(u32 n)
 {
@@ -653,7 +653,7 @@ static int SBD_setup_device(struct spectra_nand_dev *dev, int which)
 	}
 	dev->queue->queuedata = dev;
 
-	/* As Linux block layer doens't support >4KB hardware sector,  */
+	/* As Linux block layer doesn't support >4KB hardware sector,  */
 	/* Here we force report 512 byte hardware sector size to Kernel */
 	blk_queue_logical_block_size(dev->queue, 512);
 
diff --git a/drivers/staging/spectra/flash.c b/drivers/staging/spectra/flash.c
index a2f820025ae..aead358e5c2 100644
--- a/drivers/staging/spectra/flash.c
+++ b/drivers/staging/spectra/flash.c
@@ -965,7 +965,7 @@ static void process_cmd_fail_abort(int *first_failed_cmd,
 	if (0 == *first_failed_cmd)
 		*first_failed_cmd = PendingCMD[idx].SBDCmdIndex;
 
-	nand_dbg_print(NAND_DBG_DEBUG, "Uncorrectable error has occured "
+	nand_dbg_print(NAND_DBG_DEBUG, "Uncorrectable error has occurred "
 		"while executing %u Command %u accesing Block %u\n",
 		(unsigned int)p_BTableChangesDelta->ftl_cmd_cnt,
 		PendingCMD[idx].CMD,
@@ -1879,7 +1879,7 @@ static int write_back_to_l2_cache(u8 *buf, u64 logical_addr)
 }
 
 /*
- * Seach in the Level2 Cache table to find the cache item.
+ * Search in the Level2 Cache table to find the cache item.
  * If find, read the data from the NAND page of L2 Cache,
  * Otherwise, return FAIL.
  */
@@ -3989,7 +3989,7 @@ int GLOB_FTL_Block_Erase(u64 blk_addr)
 * Inputs:       index to block that was just incremented and is at the max
 * Outputs:      PASS=0 / FAIL=1
 * Description:  If any erase counts at MAX, adjusts erase count of every
-*               block by substracting least worn
+*               block by subtracting least worn
 *               counter from counter value of every entry in wear table
 *&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
 static int FTL_Adjust_Relative_Erase_Count(u32 Index_of_MAX)
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index d55a8e40318..3e68d58fdff 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -71,7 +71,7 @@
 #define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM	(0x01)
 
 /**
- * struct synaptics_rmi4_fn_desc - contains the funtion descriptor information
+ * struct synaptics_rmi4_fn_desc - contains the function descriptor information
  * @query_base_addr: base address for query
  * @cmd_base_addr: base address for command
  * @ctrl_base_addr: base address for control
@@ -92,7 +92,7 @@ struct synaptics_rmi4_fn_desc {
 };
 
 /**
- * struct synaptics_rmi4_fn - contains the funtion information
+ * struct synaptics_rmi4_fn - contains the function information
  * @fn_number: function number
  * @num_of_data_sources: number of data sources
  * @num_of_data_points: number of fingers touched
@@ -151,7 +151,7 @@ struct synaptics_rmi4_device_info {
  * @input_dev: pointer for input device
  * @i2c_client: pointer for i2c client
  * @board: constant pointer for touch platform data
- * @fn_list_mutex: mutex for funtion list
+ * @fn_list_mutex: mutex for function list
  * @rmi4_page_mutex: mutex for rmi4 page
  * @current_page: variable for integer
  * @number_of_interrupt_register: interrupt registers count
@@ -278,7 +278,7 @@ static int synaptics_rmi4_i2c_byte_write(struct synaptics_rmi4_data *pdata,
 	txbuf[0]	= address & MASK_8BIT;
 	txbuf[1]	= data;
 	retval		= i2c_master_send(pdata->i2c_client, txbuf, 2);
-	/* Add in retry on writes only in certian error return values */
+	/* Add in retry on writes only in certain error return values */
 	if (retval != 2) {
 		dev_err(&i2c->dev, "%s:failed:%d\n", __func__, retval);
 		retval = -EIO;
@@ -561,7 +561,7 @@ static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
 	}
 	/*
 	 * 2D data sources have only 3 bits for the number of fingers
-	 * supported - so the encoding is a bit wierd.
+	 * supported - so the encoding is a bit weird.
 	 */
 	if ((queries[1] & MASK_3BIT) <= 4)
 		/* add 1 since zero based */
@@ -1027,7 +1027,7 @@ err_input:
  * synaptics_rmi4_remove() - Removes the i2c-client touchscreen driver
  * @client: i2c client structure pointer
  *
- * This funtion uses to remove the i2c-client
+ * This function uses to remove the i2c-client
  * touchscreen driver and returns integer.
  */
 static int __devexit synaptics_rmi4_remove(struct i2c_client *client)
@@ -1053,7 +1053,7 @@ static int __devexit synaptics_rmi4_remove(struct i2c_client *client)
  * synaptics_rmi4_suspend() - suspend the touch screen controller
  * @dev: pointer to device structure
  *
- * This funtion is used to suspend the
+ * This function is used to suspend the
  * touch panel controller and returns integer
  */
 static int synaptics_rmi4_suspend(struct device *dev)
@@ -1089,7 +1089,7 @@ static int synaptics_rmi4_suspend(struct device *dev)
  * synaptics_rmi4_resume() - resume the touch screen controller
  * @dev: pointer to device structure
  *
- * This funtion is used to resume the touch panel
+ * This function is used to resume the touch panel
  * controller and returns integer.
  */
 static int synaptics_rmi4_resume(struct device *dev)
@@ -1148,7 +1148,7 @@ static struct i2c_driver synaptics_rmi4_driver = {
 /**
  * synaptics_rmi4_init() - Initialize the touchscreen driver
  *
- * This funtion uses to initializes the synaptics
+ * This function uses to initializes the synaptics
  * touchscreen driver and returns integer.
  */
 static int __init synaptics_rmi4_init(void)
@@ -1158,7 +1158,7 @@ static int __init synaptics_rmi4_init(void)
 /**
  * synaptics_rmi4_exit() - De-initialize the touchscreen driver
  *
- * This funtion uses to de-initialize the synaptics
+ * This function uses to de-initialize the synaptics
  * touchscreen driver and returns none.
  */
 static void __exit synaptics_rmi4_exit(void)
diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index 1e0273e50d2..7cb58710397 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -366,7 +366,7 @@ extern s32 dsp_debug;
  *  ======== sm_interrupt_dsp ========
  *  Purpose:
  *      Set interrupt value & send an interrupt to the DSP processor(s).
- *      This is typicaly used when mailbox interrupt mechanisms allow data
+ *      This is typically used when mailbox interrupt mechanisms allow data
  *      to be associated with interrupt such as for OMAP's CMD/DATA regs.
  *  Parameters:
  *      dev_context:    Handle to Bridge driver defined device info.
diff --git a/drivers/staging/tidspbridge/core/chnl_sm.c b/drivers/staging/tidspbridge/core/chnl_sm.c
index 8381130e146..6d66e7d0fba 100644
--- a/drivers/staging/tidspbridge/core/chnl_sm.c
+++ b/drivers/staging/tidspbridge/core/chnl_sm.c
@@ -578,7 +578,7 @@ int bridge_chnl_get_ioc(struct chnl_object *chnl_obj, u32 timeout,
 		} else if (stat_sync == -EPERM) {
 			/* This can occur when the user mode thread is
 			 * aborted (^C), or when _VWIN32_WaitSingleObject()
-			 * fails due to unkown causes. */
+			 * fails due to unknown causes. */
 			/* Even though Wait failed, there may be something in
 			 * the Q: */
 			if (list_empty(&pchnl->io_completions)) {
diff --git a/drivers/staging/tidspbridge/dynload/cload.c b/drivers/staging/tidspbridge/dynload/cload.c
index 390040984e0..fe1ef0addb0 100644
--- a/drivers/staging/tidspbridge/dynload/cload.c
+++ b/drivers/staging/tidspbridge/dynload/cload.c
@@ -718,7 +718,7 @@ static void dload_symbols(struct dload_state *dlthis)
 	 * as a temporary for .dllview record construction.
 	 * Allocate storage for the whole table.  Add 1 to the section count
 	 * in case a trampoline section is auto-generated as well as the
-	 * size of the trampoline section name so DLLView doens't get lost.
+	 * size of the trampoline section name so DLLView doesn't get lost.
 	 */
 
 	siz = sym_count * sizeof(struct local_symbol);
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.c b/drivers/staging/tidspbridge/hw/hw_mmu.c
index 014f5d5293a..c214df9b205 100644
--- a/drivers/staging/tidspbridge/hw/hw_mmu.c
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.c
@@ -59,7 +59,7 @@ enum hw_mmu_page_size_t {
  * RETURNS:
  *
  *       Type		: hw_status
- *       Description     : 0		 -- No errors occured
+ *       Description     : 0		 -- No errors occurred
  *			 RET_BAD_NULL_PARAM     -- A Pointer
  *						Paramater was set to NULL
  *
@@ -102,7 +102,7 @@ static hw_status mmu_flush_entry(const void __iomem *base_address);
  * RETURNS:
  *
  *       Type	    	: hw_status
- *       Description     : 0		 -- No errors occured
+ *       Description     : 0		 -- No errors occurred
  *			 RET_BAD_NULL_PARAM     -- A Pointer Paramater
  *						   was set to NULL
  *			 RET_PARAM_OUT_OF_RANGE -- Input Parameter out
@@ -147,7 +147,7 @@ static hw_status mmu_set_cam_entry(const void __iomem *base_address,
  * RETURNS:
  *
  *       Type	    	: hw_status
- *       Description     : 0		 -- No errors occured
+ *       Description     : 0		 -- No errors occurred
  *			 RET_BAD_NULL_PARAM     -- A Pointer Paramater
  *							was set to NULL
  *			 RET_PARAM_OUT_OF_RANGE -- Input Parameter
diff --git a/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h b/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h
index d60e2525802..6e7ab4fd8c3 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h
@@ -144,7 +144,7 @@ struct chnl_object {
 	s8 chnl_mode;		/* Chnl mode and attributes */
 	/* Chnl I/O completion event (user mode) */
 	void *user_event;
-	/* Abstract syncronization object */
+	/* Abstract synchronization object */
 	struct sync_object *sync_event;
 	u32 process;		/* Process which created this channel */
 	u32 cb_arg;		/* Argument to use with callback */
@@ -156,7 +156,7 @@ struct chnl_object {
 	struct list_head io_completions;
 	struct list_head free_packets_list;	/* List of free Irps */
 	struct ntfy_object *ntfy_obj;
-	u32 bytes_moved;	/* Total number of bytes transfered */
+	u32 bytes_moved;	/* Total number of bytes transferred */
 
 	/* For DSP-DMA */
 
diff --git a/drivers/staging/tidspbridge/include/dspbridge/clk.h b/drivers/staging/tidspbridge/include/dspbridge/clk.h
index b2395032342..685341c5069 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/clk.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/clk.h
@@ -55,7 +55,7 @@ extern void dsp_clk_exit(void);
  *      Initializes private state of CLK module.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      CLK initialized.
@@ -71,7 +71,7 @@ void dsp_gpt_wait_overflow(short int clk_id, unsigned int load);
  *  Parameters:
  *  Returns:
  *      0:	Success.
- *	-EPERM:	Error occured while enabling the clock.
+ *	-EPERM:	Error occurred while enabling the clock.
  *  Requires:
  *  Ensures:
  */
@@ -86,7 +86,7 @@ u32 dsp_clock_enable_all(u32 dsp_per_clocks);
  *  Parameters:
  *  Returns:
  *      0:        Success.
- *      -EPERM:      Error occured while disabling the clock.
+ *      -EPERM:      Error occurred while disabling the clock.
  *  Requires:
  *  Ensures:
  */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cmm.h b/drivers/staging/tidspbridge/include/dspbridge/cmm.h
index 27a21b5f3ff..aff22051cf5 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/cmm.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/cmm.h
@@ -190,7 +190,7 @@ extern int cmm_get_info(struct cmm_object *hcmm_mgr,
  *      Initializes private state of CMM module.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      CMM initialized.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cod.h b/drivers/staging/tidspbridge/include/dspbridge/cod.h
index 53bd4bb8b0b..cb684c11b30 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/cod.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/cod.h
@@ -249,7 +249,7 @@ extern int cod_get_sym_value(struct cod_manager *cod_mgr_obj,
  *  Parameters:
  *      None.
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      A requirement for each of the other public COD functions.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dev.h b/drivers/staging/tidspbridge/include/dspbridge/dev.h
index f41e4783157..f92b4be0b41 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dev.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dev.h
@@ -497,7 +497,7 @@ extern void dev_exit(void);
  *      Initialize DEV's private state, keeping a reference count on each call.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      TRUE: A requirement for the other public DEV functions.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index 25ef1a2c58e..9cdbd955dce 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -154,7 +154,7 @@ struct process_context {
  *  Parameters:
  *      drv_obj:        Location to store created DRV Object handle.
  *  Returns:
- *      0:        Sucess
+ *      0:        Success
  *      -ENOMEM:    Failed in Memory allocation
  *      -EPERM:      General Failure
  *  Requires:
@@ -170,7 +170,7 @@ struct process_context {
  *      There is one Driver Object for the Driver representing
  *      the driver itself. It contains the list of device
  *      Objects and the list of Device Extensions in the system.
- *      Also it can hold other neccessary
+ *      Also it can hold other necessary
  *      information in its storage area.
  */
 extern int drv_create(struct drv_object **drv_obj);
@@ -180,7 +180,7 @@ extern int drv_create(struct drv_object **drv_obj);
  *  Purpose:
  *      destroys the Dev Object list, DrvExt list
  *      and destroy the DRV object
- *      Called upon driver unLoading.or unsuccesful loading of the driver.
+ *      Called upon driver unLoading.or unsuccessful loading of the driver.
  *  Parameters:
  *      driver_obj:     Handle to Driver object .
  *  Returns:
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
index c2ba26c0930..ed32bf38313 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
@@ -52,7 +52,7 @@ struct bridge_dev_context;
  *      dev_ctxt:    Handle to Bridge driver defined device context.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL
@@ -91,7 +91,7 @@ typedef int(*fxn_brd_setstate) (struct bridge_dev_context
  *      dsp_addr:       DSP address at which to start execution.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL
@@ -142,7 +142,7 @@ typedef int(*fxn_brd_memcopy) (struct bridge_dev_context
  *      mem_type:       Memory space on DSP to which to transfer.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL;
@@ -205,7 +205,7 @@ typedef int(*fxn_brd_memunmap) (struct bridge_dev_context
  *      dev_ctxt:    Handle to Bridge driver defined device context.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL
@@ -248,7 +248,7 @@ typedef int(*fxn_brd_status) (struct bridge_dev_context *dev_ctxt,
  *      mem_type:       Memory space on DSP from which to transfer.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL;
@@ -274,7 +274,7 @@ typedef int(*fxn_brd_read) (struct bridge_dev_context *dev_ctxt,
  *      mem_type:       Memory space on DSP to which to transfer.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL;
@@ -601,7 +601,7 @@ typedef int(*fxn_chnl_getmgrinfo) (struct chnl_mgr
  *  Returns:
  *      0:            Success;
  *      -EFAULT:        Invalid chnl_obj.
- *      -ETIMEDOUT: Timeout occured before channel could be idled.
+ *      -ETIMEDOUT: Timeout occurred before channel could be idled.
  *  Requires:
  *  Ensures:
  */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/mgr.h b/drivers/staging/tidspbridge/include/dspbridge/mgr.h
index e506c4d4947..47b0318430e 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/mgr.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/mgr.h
@@ -176,7 +176,7 @@ extern void mgr_exit(void);
  *      mgr_handle:     Handle to the Manager Object
  *      dcd_handle:     Ptr to receive the DCD Handle.
  *  Returns:
- *      0:        Sucess
+ *      0:        Success
  *      -EPERM:      Failure to get the Handle
  *  Requires:
  *      MGR is initialized.
@@ -195,7 +195,7 @@ extern int mgr_get_dcd_handle(struct mgr_object
  *      call. Initializes the DCD.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      TRUE: A requirement for the other public MGR functions.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/node.h b/drivers/staging/tidspbridge/include/dspbridge/node.h
index 53da0ef483c..16371d818e3 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/node.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/node.h
@@ -44,7 +44,7 @@
  *      -ESPIPE:        iAlg functions not found for a DAIS node.
  *      -EDOM:         attr_in != NULL and attr_in->prio out of
  *                          range.
- *      -EPERM:          A failure occured, unable to allocate node.
+ *      -EPERM:          A failure occurred, unable to allocate node.
  *      -EBADR:    Proccessor is not in the running state.
  *  Requires:
  *      node_init(void) called.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/proc.h b/drivers/staging/tidspbridge/include/dspbridge/proc.h
index 5e09fd165d9..f00dffd5198 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/proc.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/proc.h
@@ -89,7 +89,7 @@ extern int proc_auto_start(struct cfg_devnode *dev_node_obj,
  *  Returns:
  *      0     :       SUCCESS
  *      -EFAULT :       Invalid processor handle.
- *      -ETIME:       A Timeout Occured before the Control information
+ *      -ETIME:       A Timeout Occurred before the Control information
  *			  could be sent.
  *      -EPERM   :       General Failure.
  *  Requires:
@@ -169,7 +169,7 @@ extern int proc_enum_nodes(void *hprocessor,
  *      0     :       Success.
  *      -EFAULT :       Invalid processor handle.
  *      -EBADR:    The processor is not in the PROC_RUNNING state.
- *      -ETIME:       A timeout occured before the DSP responded to the
+ *      -ETIME:       A timeout occurred before the DSP responded to the
  *			  querry.
  *      -EPERM   :       Unable to get Resource Information
  *  Requires:
@@ -229,7 +229,7 @@ extern int proc_get_dev_object(void *hprocessor,
  *      call.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      TRUE: A requirement for the other public PROC functions.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/pwr.h b/drivers/staging/tidspbridge/include/dspbridge/pwr.h
index 5e3ab2123aa..0fb066488da 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/pwr.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/pwr.h
@@ -46,7 +46,7 @@
  *      0:            Success.
  *      0: Success, but the DSP was already asleep.
  *      -EINVAL:    The specified sleep_code is not supported.
- *      -ETIME:       A timeout occured while waiting for DSP sleep
+ *      -ETIME:       A timeout occurred while waiting for DSP sleep
  *                          confirmation.
  *      -EPERM:          General failure, unable to send sleep command to
  *                          the DSP.
@@ -67,7 +67,7 @@ extern int pwr_sleep_dsp(const u32 sleep_code, const u32 timeout);
  *  Returns:
  *      0:            Success.
  *      0:  Success, but the DSP was already awake.
- *      -ETIME:       A timeout occured while waiting for wake
+ *      -ETIME:       A timeout occurred while waiting for wake
  *                          confirmation.
  *      -EPERM:          General failure, unable to send wake command to
  *                          the DSP.
@@ -85,7 +85,7 @@ extern int pwr_wake_dsp(const u32 timeout);
  *  Returns:
  *      0:            Success.
  *      0:  Success, but the DSP was already awake.
- *      -ETIME:       A timeout occured while waiting for wake
+ *      -ETIME:       A timeout occurred while waiting for wake
  *                          confirmation.
  *      -EPERM:          General failure, unable to send wake command to
  *                          the DSP.
@@ -103,7 +103,7 @@ extern int pwr_pm_pre_scale(u16 voltage_domain, u32 level);
  *  Returns:
  *      0:            Success.
  *      0:  Success, but the DSP was already awake.
- *      -ETIME:       A timeout occured while waiting for wake
+ *      -ETIME:       A timeout occurred while waiting for wake
  *                          confirmation.
  *      -EPERM:          General failure, unable to send wake command to
  *                          the DSP.
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
index 9a38d86a84a..522810bc742 100644
--- a/drivers/staging/tidspbridge/pmgr/dev.c
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -787,7 +787,7 @@ int dev_notify_clients(struct dev_object *dev_obj, u32 ret)
 
 	/*
 	 * FIXME: this code needs struct proc_object to have a list_head
-	 * at the begining. If not, this can go horribly wrong.
+	 * at the beginning. If not, this can go horribly wrong.
 	 */
 	list_for_each(curr, &dev_obj->proc_list)
 		proc_notify_clients((void *)curr, ret);
@@ -810,7 +810,7 @@ int dev_remove_device(struct cfg_devnode *dev_node_obj)
 	if (!dev_node_obj)
 		status = -EFAULT;
 
-	/* Retrieve the device object handle originaly stored with
+	/* Retrieve the device object handle originally stored with
 	 * the dev_node: */
 	if (!status) {
 		/* check the device string and then store dev object */
@@ -986,7 +986,7 @@ int dev_insert_proc_object(struct dev_object *hdev_obj,
 	/* Add DevObject to tail. */
 	/*
 	 * FIXME: this code needs struct proc_object to have a list_head
-	 * at the begining. If not, this can go horribly wrong.
+	 * at the beginning. If not, this can go horribly wrong.
 	 */
 	list_add_tail((struct list_head *)proc_obj, &dev_obj->proc_list);
 
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
index 8c88583364e..db8215f540d 100644
--- a/drivers/staging/tidspbridge/rmgr/drv.c
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -609,7 +609,7 @@ int drv_request_resources(u32 dw_context, u32 *dev_node_strg)
 	DBC_REQUIRE(dev_node_strg != NULL);
 
 	/*
-	 *  Allocate memory to hold the string. This will live untill
+	 *  Allocate memory to hold the string. This will live until
 	 *  it is freed in the Release resources. Update the driver object
 	 *  list.
 	 */
diff --git a/drivers/staging/tidspbridge/rmgr/nldr.c b/drivers/staging/tidspbridge/rmgr/nldr.c
index fb5c2ba01d4..0e70cba15eb 100644
--- a/drivers/staging/tidspbridge/rmgr/nldr.c
+++ b/drivers/staging/tidspbridge/rmgr/nldr.c
@@ -57,9 +57,9 @@
  *   uuuuuuuu|fueeeeee|fudddddd|fucccccc|
  *  where
  *      u = unused
- *      cccccc = prefered/required dynamic mem segid for create phase data/code
- *      dddddd = prefered/required dynamic mem segid for delete phase data/code
- *      eeeeee = prefered/req. dynamic mem segid for execute phase data/code
+ *      cccccc = preferred/required dynamic mem segid for create phase data/code
+ *      dddddd = preferred/required dynamic mem segid for delete phase data/code
+ *      eeeeee = preferred/req. dynamic mem segid for execute phase data/code
  *      f = flag indicating if memory is preferred or required:
  *	  f = 1 if required, f = 0 if preferred.
  *
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
index c4e5c4e0d71..242dd139999 100644
--- a/drivers/staging/tidspbridge/rmgr/proc.c
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -1670,7 +1670,7 @@ int proc_stop(void *hprocessor)
 	if (!status) {
 		dev_dbg(bridge, "%s: processor in standby mode\n", __func__);
 		p_proc_object->proc_state = PROC_STOPPED;
-		/* Destory the Node Manager, msg_ctrl Manager */
+		/* Destroy the Node Manager, msg_ctrl Manager */
 		if (!(dev_destroy2(p_proc_object->dev_obj))) {
 			/* Destroy the msg_ctrl by calling msg_delete */
 			dev_get_msg_mgr(p_proc_object->dev_obj, &hmsg_mgr);
@@ -1827,7 +1827,7 @@ static int proc_monitor(struct proc_object *proc_obj)
 
 	/* This is needed only when Device is loaded when it is
 	 * already 'ACTIVE' */
-	/* Destory the Node Manager, msg_ctrl Manager */
+	/* Destroy the Node Manager, msg_ctrl Manager */
 	if (!dev_destroy2(proc_obj->dev_obj)) {
 		/* Destroy the msg_ctrl by calling msg_delete */
 		dev_get_msg_mgr(proc_obj->dev_obj, &hmsg_mgr);
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index c80a316d9d8..17db6684abb 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -182,7 +182,7 @@ static inline void get_next_buf(struct tm6000_dmaqueue *dma_q,
 	if (!buf)
 		return;
 
-	/* Cleans up buffer - Usefull for testing for frame/URB loss */
+	/* Cleans up buffer - Useful for testing for frame/URB loss */
 	outp = videobuf_to_vmalloc(&(*buf)->vb);
 
 	return;
diff --git a/drivers/staging/tty/cd1865.h b/drivers/staging/tty/cd1865.h
index 9940966e7a1..8c2ad654b79 100644
--- a/drivers/staging/tty/cd1865.h
+++ b/drivers/staging/tty/cd1865.h
@@ -9,7 +9,7 @@
  *      Please DO contact io8-linux@specialix.co.uk if you require
  *      support.
  *
- *      This driver was developped in the BitWizard linux device
+ *      This driver was developed in the BitWizard linux device
  *      driver service. If you require a linux device driver for your
  *      product, please contact devices@BitWizard.nl for a quote.
  *
diff --git a/drivers/staging/tty/epca.c b/drivers/staging/tty/epca.c
index 7ad3638967a..7f1369e5b41 100644
--- a/drivers/staging/tty/epca.c
+++ b/drivers/staging/tty/epca.c
@@ -7,7 +7,7 @@
 	** This driver is no longer supported by Digi **
 
 	Much of this design and code came from epca.c which was
-	copyright (C) 1994, 1995 Troy De Jongh, and subsquently
+	copyright (C) 1994, 1995 Troy De Jongh, and subsequently
 	modified by David Nugent, Christoph Lameter, Mike McLagan.
 
 	This program is free software; you can redistribute it and/or modify
@@ -471,7 +471,7 @@ static void shutdown(struct channel *ch, struct tty_struct *tty)
 	memoff(ch);
 
 	/*
-	 * The channel has officialy been closed. The next time it is opened it
+	 * The channel has officially been closed. The next time it is opened it
 	 * will have to reinitialized. Set a flag to indicate this.
 	 */
 	/* Prevent future Digi programmed interrupts from coming active */
@@ -975,7 +975,7 @@ static int __init pc_init(void)
 
 	/*
 	 * Note : If lilo was used to configure the driver and the ignore
-	 * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards
+	 * epcaconfig option was chosen (digiepca=2) then nbdevs and num_cards
 	 * will equal 0 at this point. This is okay; PCI cards will still be
 	 * picked up if detected.
 	 */
@@ -1230,14 +1230,14 @@ static void post_fep_init(unsigned int crd)
 	memaddr = bd->re_map_membase;
 
 	/*
-	 * The below assignment will set bc to point at the BEGINING of the
+	 * The below assignment will set bc to point at the BEGINNING of the
 	 * cards channel structures. For 1 card there will be between 8 and 64
 	 * of these structures.
 	 */
 	bc = memaddr + CHANSTRUCT;
 
 	/*
-	 * The below assignment will set gd to point at the BEGINING of global
+	 * The below assignment will set gd to point at the BEGINNING of global
 	 * memory address 0xc00. The first data in that global memory actually
 	 * starts at address 0xc1a. The command in pointer begins at 0xd10.
 	 */
@@ -1492,7 +1492,7 @@ static void doevent(int crd)
 		/*
 		 * The two assignments below get the current modem status
 		 * (mstat) and the previous modem status (lstat). These are
-		 * useful becuase an event could signal a change in modem
+		 * useful because an event could signal a change in modem
 		 * signals itself.
 		 */
 		mstat = readb(eventbuf + 2);
@@ -1897,7 +1897,7 @@ static void receive_data(struct channel *ch, struct tty_struct *tty)
 		/*
 		 * Even if head has wrapped around only report the amount of
 		 * data to be equal to the size - tail. Remember memcpy can't
-		 * automaticly wrap around the receive buffer.
+		 * automatically wrap around the receive buffer.
 		 */
 		dataToRead = (wrapgap < bytesAvailable) ? wrapgap
 							: bytesAvailable;
@@ -2543,7 +2543,7 @@ static void __init epca_setup(char *str, int *ints)
 					break;
 			/*
 			 * If the index incremented above refers to a
-			 * legitamate board type set it here.
+			 * legitimate board type set it here.
 			 */
 			if (index < EPCA_NUM_TYPES)
 				board.type = loop;
diff --git a/drivers/staging/tty/ip2/i2hw.h b/drivers/staging/tty/ip2/i2hw.h
index c0ba6c05f0c..8df2f487217 100644
--- a/drivers/staging/tty/ip2/i2hw.h
+++ b/drivers/staging/tty/ip2/i2hw.h
@@ -335,7 +335,7 @@ be off by a factor of five. The important point is that the first command reset
 in fact generates a reset pulse on the board. This pulse is guaranteed to last
 less than 10 milliseconds. The additional delay ensures the 1400 has had the
 chance to respond sufficiently to the first reset. Why not a longer delay? Much
-more than 50 milliseconds gets to be noticable, but the board would still work.
+more than 50 milliseconds gets to be noticeable, but the board would still work.
 
 Once all 16 bytes of the Power-on Reset Message have been read, the bootstrap
 firmware is ready to receive loadware.
@@ -399,7 +399,7 @@ typedef union _porStr		// "por" stands for Power On Reset
 		// expandable products must report a MAP of available channels. Since 
 		// each UART supports four ports, we represent each UART found by a
 		// single bit. Using two bytes to supply the mapping information we
-		// report the presense or absense of up to 16 UARTS, or 64 ports in
+		// report the presence or absence of up to 16 UARTS, or 64 ports in
 		// steps of 4 ports. For -IIEX products, the ports are numbered
 		// starting at the box closest to the controller in the "chain".
 
diff --git a/drivers/staging/tty/ip2/i2lib.c b/drivers/staging/tty/ip2/i2lib.c
index 0d10b89218e..13a3caba85f 100644
--- a/drivers/staging/tty/ip2/i2lib.c
+++ b/drivers/staging/tty/ip2/i2lib.c
@@ -821,7 +821,7 @@ i2GetStatus(i2ChanStrPtr pCh, int resetBits)
 //
 // Description:
 // Strips data from the input buffer and writes it to pDest. If there is a
-// collosal blunder, (invalid structure pointers or the like), returns -1.
+// colossal blunder, (invalid structure pointers or the like), returns -1.
 // Otherwise, returns the number of bytes read.
 //******************************************************************************
 static int
@@ -909,7 +909,7 @@ i2Input_exit:
 // Returns:    Number of bytes stripped, or -1 for error
 //
 // Description:
-// Strips any data from the input buffer. If there is a collosal blunder,
+// Strips any data from the input buffer. If there is a colossal blunder,
 // (invalid structure pointers or the like), returns -1. Otherwise, returns the
 // number of bytes stripped.
 //******************************************************************************
@@ -963,7 +963,7 @@ i2InputFlush(i2ChanStrPtr pCh)
 // Returns:    Number of bytes available, or -1 for error
 //
 // Description:
-// If there is a collosal blunder, (invalid structure pointers or the like),
+// If there is a colossal blunder, (invalid structure pointers or the like),
 // returns -1. Otherwise, returns the number of bytes stripped. Otherwise,
 // returns the number of bytes available in the buffer.
 //******************************************************************************
@@ -1001,7 +1001,7 @@ i2InputAvailable(i2ChanStrPtr pCh)
 //
 // Description:
 // Queues the data at pSource to be sent as data packets to the board. If there
-// is a collosal blunder, (invalid structure pointers or the like), returns -1.
+// is a colossal blunder, (invalid structure pointers or the like), returns -1.
 // Otherwise, returns the number of bytes written. What if there is not enough
 // room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then
 // we transfer as many characters as we can now, then return. If this bit is
diff --git a/drivers/staging/tty/ip2/ip2main.c b/drivers/staging/tty/ip2/ip2main.c
index ea7a8fb0828..ba074fbb4ce 100644
--- a/drivers/staging/tty/ip2/ip2main.c
+++ b/drivers/staging/tty/ip2/ip2main.c
@@ -1824,7 +1824,7 @@ ip2_flush_chars( PTTY tty )
 //		ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
 
 		//
-		// We may need to restart i2Output if it does not fullfill this request
+		// We may need to restart i2Output if it does not fulfill this request
 		//
 		strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff);
 		if ( strip != pCh->Pbuf_stuff ) {
diff --git a/drivers/staging/tty/specialix.c b/drivers/staging/tty/specialix.c
index 17a1be536a4..5c3598ec745 100644
--- a/drivers/staging/tty/specialix.c
+++ b/drivers/staging/tty/specialix.c
@@ -9,7 +9,7 @@
  *      support. But please read the documentation (specialix.txt)
  *      first.
  *
- *      This driver was developped in the BitWizard linux device
+ *      This driver was developed in the BitWizard linux device
  *      driver service. If you require a linux device driver for your
  *      product, please contact devices@BitWizard.nl for a quote.
  *
@@ -978,7 +978,7 @@ static void sx_change_speed(struct specialix_board *bp,
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CAR, port_No(port));
 
-	/* The Specialix board doens't implement the RTS lines.
+	/* The Specialix board doesn't implement the RTS lines.
 	   They are used to set the IRQ level. Don't touch them. */
 	if (sx_crtscts(tty))
 		port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
diff --git a/drivers/staging/tty/specialix_io8.h b/drivers/staging/tty/specialix_io8.h
index c63005274d9..1215d7e2cb3 100644
--- a/drivers/staging/tty/specialix_io8.h
+++ b/drivers/staging/tty/specialix_io8.h
@@ -10,7 +10,7 @@
  *      Please DO contact io8-linux@specialix.co.uk if you require
  *      support.
  *
- *      This driver was developped in the BitWizard linux device
+ *      This driver was developed in the BitWizard linux device
  *      driver service. If you require a linux device driver for your
  *      product, please contact devices@BitWizard.nl for a quote.
  *
@@ -79,7 +79,7 @@ more than a few  PCI versions of the card. */
 
 #define SPECIALIX_MAGIC		0x0907
 
-#define SX_CCR_TIMEOUT 10000   /* CCR timeout. You may need to wait upto
+#define SX_CCR_TIMEOUT 10000   /* CCR timeout. You may need to wait up to
                                   10 milliseconds before the internal
                                   processor is available again after
                                   you give it a command */
diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c
index 8214c353d9f..bce7d039346 100644
--- a/drivers/staging/usbip/stub_dev.c
+++ b/drivers/staging/usbip/stub_dev.c
@@ -220,8 +220,10 @@ static void stub_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* 1. stop threads */
-	kthread_stop(ud->tcp_rx);
-	kthread_stop(ud->tcp_tx);
+	if (ud->tcp_rx && !task_is_dead(ud->tcp_rx))
+		kthread_stop(ud->tcp_rx);
+	if (ud->tcp_tx && !task_is_dead(ud->tcp_tx))
+		kthread_stop(ud->tcp_tx);
 
 	/* 2. close the socket */
 	/*
diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/staging/usbip/stub_rx.c
index 6445f12cb4f..51fbd098647 100644
--- a/drivers/staging/usbip/stub_rx.c
+++ b/drivers/staging/usbip/stub_rx.c
@@ -171,33 +171,23 @@ static int tweak_set_configuration_cmd(struct urb *urb)
 
 static int tweak_reset_device_cmd(struct urb *urb)
 {
-	struct usb_ctrlrequest *req;
-	__u16 value;
-	__u16 index;
-	int ret;
-
-	req = (struct usb_ctrlrequest *) urb->setup_packet;
-	value = le16_to_cpu(req->wValue);
-	index = le16_to_cpu(req->wIndex);
-
-	usbip_uinfo("reset_device (port %d) to %s\n", index,
-						dev_name(&urb->dev->dev));
+	struct stub_priv *priv = (struct stub_priv *) urb->context;
+	struct stub_device *sdev = priv->sdev;
 
-	/* all interfaces should be owned by usbip driver, so just reset it.  */
-	ret = usb_lock_device_for_reset(urb->dev, NULL);
-	if (ret < 0) {
-		dev_err(&urb->dev->dev, "lock for reset\n");
-		return ret;
-	}
-
-	/* try to reset the device */
-	ret = usb_reset_device(urb->dev);
-	if (ret < 0)
-		dev_err(&urb->dev->dev, "device reset\n");
+	usbip_uinfo("reset_device %s\n", dev_name(&urb->dev->dev));
 
-	usb_unlock_device(urb->dev);
-
-	return ret;
+	/*
+	 * usb_lock_device_for_reset caused a deadlock: it causes the driver
+	 * to unbind. In the shutdown the rx thread is signalled to shut down
+	 * but this thread is pending in the usb_lock_device_for_reset.
+	 *
+	 * Instead queue the reset.
+	 *
+	 * Unfortunatly an existing usbip connection will be dropped due to
+	 * driver unbinding.
+	 */
+	usb_queue_reset_device(sdev->interface);
+	return 0;
 }
 
 /*
diff --git a/drivers/staging/usbip/stub_tx.c b/drivers/staging/usbip/stub_tx.c
index 5523f25998e..64a52b26dcf 100644
--- a/drivers/staging/usbip/stub_tx.c
+++ b/drivers/staging/usbip/stub_tx.c
@@ -170,7 +170,6 @@ static int stub_send_ret_submit(struct stub_device *sdev)
 	struct stub_priv *priv, *tmp;
 
 	struct msghdr msg;
-	struct kvec iov[3];
 	size_t txsize;
 
 	size_t total_size = 0;
@@ -180,28 +179,73 @@ static int stub_send_ret_submit(struct stub_device *sdev)
 		struct urb *urb = priv->urb;
 		struct usbip_header pdu_header;
 		void *iso_buffer = NULL;
+		struct kvec *iov = NULL;
+		int iovnum = 0;
 
 		txsize = 0;
 		memset(&pdu_header, 0, sizeof(pdu_header));
 		memset(&msg, 0, sizeof(msg));
-		memset(&iov, 0, sizeof(iov));
 
-		usbip_dbg_stub_tx("setup txdata urb %p\n", urb);
+		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+			iovnum = 2 + urb->number_of_packets;
+		else
+			iovnum = 2;
+
+		iov = kzalloc(iovnum * sizeof(struct kvec), GFP_KERNEL);
 
+		if (!iov) {
+			usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_MALLOC);
+			return -1;
+		}
+
+		iovnum = 0;
 
 		/* 1. setup usbip_header */
 		setup_ret_submit_pdu(&pdu_header, urb);
+		usbip_dbg_stub_tx("setup txdata seqnum: %d urb: %p\n",
+						pdu_header.base.seqnum, urb);
+		/*usbip_dump_header(pdu_header);*/
 		usbip_header_correct_endian(&pdu_header, 1);
 
-		iov[0].iov_base = &pdu_header;
-		iov[0].iov_len  = sizeof(pdu_header);
+		iov[iovnum].iov_base = &pdu_header;
+		iov[iovnum].iov_len  = sizeof(pdu_header);
+		iovnum++;
 		txsize += sizeof(pdu_header);
 
 		/* 2. setup transfer buffer */
-		if (usb_pipein(urb->pipe) && urb->actual_length > 0) {
-			iov[1].iov_base = urb->transfer_buffer;
-			iov[1].iov_len  = urb->actual_length;
+		if (usb_pipein(urb->pipe) &&
+				usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS &&
+					urb->actual_length > 0) {
+			iov[iovnum].iov_base = urb->transfer_buffer;
+			iov[iovnum].iov_len  = urb->actual_length;
+			iovnum++;
 			txsize += urb->actual_length;
+		} else if (usb_pipein(urb->pipe) &&
+				usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+			/*
+			 * For isochronous packets: actual length is the sum of
+			 * the actual length of the individual, packets, but as
+			 * the packet offsets are not changed there will be
+			 * padding between the packets. To optimally use the
+			 * bandwidth the padding is not transmitted.
+			 */
+
+			int i;
+			for (i = 0; i < urb->number_of_packets; i++) {
+				iov[iovnum].iov_base = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+				iov[iovnum].iov_len = urb->iso_frame_desc[i].actual_length;
+				iovnum++;
+				txsize += urb->iso_frame_desc[i].actual_length;
+			}
+
+			if (txsize != sizeof(pdu_header) + urb->actual_length) {
+				dev_err(&sdev->interface->dev,
+					"actual length of urb (%d) does not match iso packet sizes (%d)\n",
+					urb->actual_length, txsize-sizeof(pdu_header));
+				kfree(iov);
+				usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_TCP);
+			   return -1;
+			}
 		}
 
 		/* 3. setup iso_packet_descriptor */
@@ -212,32 +256,34 @@ static int stub_send_ret_submit(struct stub_device *sdev)
 			if (!iso_buffer) {
 				usbip_event_add(&sdev->ud,
 						SDEV_EVENT_ERROR_MALLOC);
+				kfree(iov);
 				return -1;
 			}
 
-			iov[2].iov_base = iso_buffer;
-			iov[2].iov_len  = len;
+			iov[iovnum].iov_base = iso_buffer;
+			iov[iovnum].iov_len  = len;
 			txsize += len;
+			iovnum++;
 		}
 
-		ret = kernel_sendmsg(sdev->ud.tcp_socket, &msg, iov,
-				     3, txsize);
+		ret = kernel_sendmsg(sdev->ud.tcp_socket, &msg,
+						iov,  iovnum, txsize);
 		if (ret != txsize) {
 			dev_err(&sdev->interface->dev,
 				"sendmsg failed!, retval %d for %zd\n",
 				ret, txsize);
+			kfree(iov);
 			kfree(iso_buffer);
 			usbip_event_add(&sdev->ud, SDEV_EVENT_ERROR_TCP);
 			return -1;
 		}
 
+		kfree(iov);
 		kfree(iso_buffer);
-		usbip_dbg_stub_tx("send txdata\n");
 
 		total_size += txsize;
 	}
 
-
 	spin_lock_irqsave(&sdev->priv_lock, flags);
 
 	list_for_each_entry_safe(priv, tmp, &sdev->priv_free, list) {
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 337abc48f71..7b1fe45bf7d 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -333,10 +333,11 @@ void usbip_dump_header(struct usbip_header *pdu)
 		usbip_udbg("CMD_UNLINK: seq %u\n", pdu->u.cmd_unlink.seqnum);
 		break;
 	case USBIP_RET_SUBMIT:
-		usbip_udbg("RET_SUBMIT: st %d al %u sf %d ec %d\n",
+		usbip_udbg("RET_SUBMIT: st %d al %u sf %d #p %d ec %d\n",
 				pdu->u.ret_submit.status,
 				pdu->u.ret_submit.actual_length,
 				pdu->u.ret_submit.start_frame,
+				pdu->u.ret_submit.number_of_packets,
 				pdu->u.ret_submit.error_count);
 	case USBIP_RET_UNLINK:
 		usbip_udbg("RET_UNLINK: status %d\n", pdu->u.ret_unlink.status);
@@ -520,6 +521,7 @@ static void usbip_pack_ret_submit(struct usbip_header *pdu, struct urb *urb,
 		rpdu->status		= urb->status;
 		rpdu->actual_length	= urb->actual_length;
 		rpdu->start_frame	= urb->start_frame;
+		rpdu->number_of_packets = urb->number_of_packets;
 		rpdu->error_count	= urb->error_count;
 	} else {
 		/* vhci_rx.c */
@@ -527,6 +529,7 @@ static void usbip_pack_ret_submit(struct usbip_header *pdu, struct urb *urb,
 		urb->status		= rpdu->status;
 		urb->actual_length	= rpdu->actual_length;
 		urb->start_frame	= rpdu->start_frame;
+		urb->number_of_packets = rpdu->number_of_packets;
 		urb->error_count	= rpdu->error_count;
 	}
 }
@@ -595,11 +598,13 @@ static void correct_endian_ret_submit(struct usbip_header_ret_submit *pdu,
 		cpu_to_be32s(&pdu->status);
 		cpu_to_be32s(&pdu->actual_length);
 		cpu_to_be32s(&pdu->start_frame);
+		cpu_to_be32s(&pdu->number_of_packets);
 		cpu_to_be32s(&pdu->error_count);
 	} else {
 		be32_to_cpus(&pdu->status);
 		be32_to_cpus(&pdu->actual_length);
 		be32_to_cpus(&pdu->start_frame);
+		cpu_to_be32s(&pdu->number_of_packets);
 		be32_to_cpus(&pdu->error_count);
 	}
 }
@@ -725,6 +730,7 @@ int usbip_recv_iso(struct usbip_device *ud, struct urb *urb)
 	int size = np * sizeof(*iso);
 	int i;
 	int ret;
+	int total_length = 0;
 
 	if (!usb_pipeisoc(urb->pipe))
 		return 0;
@@ -754,19 +760,75 @@ int usbip_recv_iso(struct usbip_device *ud, struct urb *urb)
 		return -EPIPE;
 	}
 
+
 	for (i = 0; i < np; i++) {
 		iso = buff + (i * sizeof(*iso));
 
 		usbip_iso_pakcet_correct_endian(iso, 0);
 		usbip_pack_iso(iso, &urb->iso_frame_desc[i], 0);
+		total_length += urb->iso_frame_desc[i].actual_length;
 	}
 
 	kfree(buff);
 
+	if (total_length != urb->actual_length) {
+		dev_err(&urb->dev->dev,
+		  "total length of iso packets (%d) not equal to actual length of buffer (%d)\n",
+		  total_length, urb->actual_length);
+
+		if (ud->side == USBIP_STUB)
+			usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+		else
+			usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+
+		return -EPIPE;
+	}
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(usbip_recv_iso);
 
+/*
+ * This functions restores the padding which was removed for optimizing
+ * the bandwidth during transfer over tcp/ip
+ *
+ * buffer and iso packets need to be stored and be in propeper endian in urb
+ * before calling this function
+ */
+int usbip_pad_iso(struct usbip_device *ud, struct urb *urb)
+{
+	int np = urb->number_of_packets;
+	int i;
+	int ret;
+	int actualoffset = urb->actual_length;
+
+	if (!usb_pipeisoc(urb->pipe))
+		return 0;
+
+	/* if no packets or length of data is 0, then nothing to unpack */
+	if (np == 0 || urb->actual_length == 0)
+		return 0;
+
+	/*
+	 * if actual_length is transfer_buffer_length then no padding is
+	 * present.
+	*/
+	if (urb->actual_length == urb->transfer_buffer_length)
+		return 0;
+
+	/*
+	 * loop over all packets from last to first (to prevent overwritting
+	 * memory when padding) and move them into the proper place
+	 */
+	for (i = np-1; i > 0; i--) {
+		actualoffset -= urb->iso_frame_desc[i].actual_length;
+		memmove(urb->transfer_buffer + urb->iso_frame_desc[i].offset,
+				  urb->transfer_buffer + actualoffset,
+				  urb->iso_frame_desc[i].actual_length);
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usbip_pad_iso);
 
 /* some members of urb must be substituted before. */
 int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb)
diff --git a/drivers/staging/usbip/usbip_common.h b/drivers/staging/usbip/usbip_common.h
index 9f809c315d9..c767f52be5f 100644
--- a/drivers/staging/usbip/usbip_common.h
+++ b/drivers/staging/usbip/usbip_common.h
@@ -379,6 +379,8 @@ void usbip_header_correct_endian(struct usbip_header *pdu, int send);
 int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb);
 /* some members of urb must be substituted before. */
 int usbip_recv_iso(struct usbip_device *ud, struct urb *urb);
+/* some members of urb must be substituted before. */
+int usbip_pad_iso(struct usbip_device *ud, struct urb *urb);
 void *usbip_alloc_iso_desc_pdu(struct urb *urb, ssize_t *bufflen);
 
 
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index e2348499859..4f4f13321f4 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -194,7 +194,7 @@ void rh_port_disconnect(int rhport)
  *
  * So, the maximum number of ports is 31 ( port 0 to port 30) ?
  *
- * The return value is the actual transfered length in byte. If nothing has
+ * The return value is the actual transferred length in byte. If nothing has
  * been changed, return 0. In the case that the number of ports is less than or
  * equal to 6 (VHCI_NPORTS==7), return 1.
  *
@@ -876,8 +876,10 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* kill threads related to this sdev, if v.c. exists */
-	kthread_stop(vdev->ud.tcp_rx);
-	kthread_stop(vdev->ud.tcp_tx);
+	if (vdev->ud.tcp_rx)
+		kthread_stop(vdev->ud.tcp_rx);
+	if (vdev->ud.tcp_tx)
+		kthread_stop(vdev->ud.tcp_tx);
 
 	usbip_uinfo("stop threads\n");
 
@@ -949,9 +951,6 @@ static void vhci_device_init(struct vhci_device *vdev)
 {
 	memset(vdev, 0, sizeof(*vdev));
 
-	vdev->ud.tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
-	vdev->ud.tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
-
 	vdev->ud.side   = USBIP_VHCI;
 	vdev->ud.status = VDEV_ST_NULL;
 	/* vdev->ud.lock   = SPIN_LOCK_UNLOCKED; */
@@ -1139,7 +1138,7 @@ static int vhci_hcd_probe(struct platform_device *pdev)
 		usbip_uerr("create hcd failed\n");
 		return -ENOMEM;
 	}
-
+	hcd->has_tt = 1;
 
 	/* this is private data for vhci_hcd */
 	the_controller = hcd_to_vhci(hcd);
diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c
index 09bf2355934..2ffc96a4c0d 100644
--- a/drivers/staging/usbip/vhci_rx.c
+++ b/drivers/staging/usbip/vhci_rx.c
@@ -100,6 +100,9 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev,
 	if (usbip_recv_iso(ud, urb) < 0)
 		return;
 
+	/* restore the padding in iso packets */
+	if (usbip_pad_iso(ud, urb) < 0)
+		return;
 
 	if (usbip_dbg_flag_vhci_rx)
 		usbip_dump_urb(urb);
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
index 3f2459f3041..e2dadbd5ef1 100644
--- a/drivers/staging/usbip/vhci_sysfs.c
+++ b/drivers/staging/usbip/vhci_sysfs.c
@@ -21,6 +21,7 @@
 #include "vhci.h"
 
 #include <linux/in.h>
+#include <linux/kthread.h>
 
 /* TODO: refine locking ?*/
 
@@ -220,13 +221,13 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
 	vdev->ud.tcp_socket = socket;
 	vdev->ud.status     = VDEV_ST_NOTASSIGNED;
 
-	wake_up_process(vdev->ud.tcp_rx);
-	wake_up_process(vdev->ud.tcp_tx);
-
 	spin_unlock(&vdev->ud.lock);
 	spin_unlock(&the_controller->lock);
 	/* end the lock */
 
+	vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
+	vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+
 	rh_port_connect(rhport, speed);
 
 	return count;
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c
index d4a48c4e59c..a4007287ef4 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/staging/vme/bridges/vme_ca91cx42.c
@@ -621,7 +621,7 @@ static int ca91cx42_master_set(struct vme_master_resource *image, int enabled,
 
 	/*
 	 * Let's allocate the resource here rather than further up the stack as
-	 * it avoids pushing loads of bus dependant stuff up the stack
+	 * it avoids pushing loads of bus dependent stuff up the stack
 	 */
 	retval = ca91cx42_alloc_resource(image, size);
 	if (retval) {
@@ -1052,7 +1052,7 @@ static int ca91cx42_dma_list_add(struct vme_dma_list *list,
 		pci_attr = dest->private;
 	}
 
-	/* Check we can do fullfill required attributes */
+	/* Check we can do fulfill required attributes */
 	if ((vme_attr->aspace & ~(VME_A16 | VME_A24 | VME_A32 | VME_USER1 |
 		VME_USER2)) != 0) {
 
@@ -1069,7 +1069,7 @@ static int ca91cx42_dma_list_add(struct vme_dma_list *list,
 		goto err_cycle;
 	}
 
-	/* Check to see if we can fullfill source and destination */
+	/* Check to see if we can fulfill source and destination */
 	if (!(((src->type == VME_DMA_PCI) && (dest->type == VME_DMA_VME)) ||
 		((src->type == VME_DMA_VME) && (dest->type == VME_DMA_PCI)))) {
 
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index b00a53e793e..106aa9daff4 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -928,7 +928,7 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,
 	spin_lock(&image->lock);
 
 	/* Let's allocate the resource here rather than further up the stack as
-	 * it avoids pushing loads of bus dependant stuff up the stack. If size
+	 * it avoids pushing loads of bus dependent stuff up the stack. If size
 	 * is zero, any existing resource will be freed.
 	 */
 	retval = tsi148_alloc_resource(image, size);
@@ -1320,7 +1320,7 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
 
 	/*
 	 * Writes are posted. We need to do a read on the VME bus to flush out
-	 * all of the writes before we check for errors. We can't guarentee
+	 * all of the writes before we check for errors. We can't guarantee
 	 * that reading the data we have just written is safe. It is believed
 	 * that there isn't any read, write re-ordering, so we can read any
 	 * location in VME space, so lets read the Device ID from the tsi148's
diff --git a/drivers/staging/vme/bridges/vme_tsi148.h b/drivers/staging/vme/bridges/vme_tsi148.h
index 9f97fa8084e..a3ac2fe9881 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.h
+++ b/drivers/staging/vme/bridges/vme_tsi148.h
@@ -212,7 +212,7 @@ static const int TSI148_LCSR_OT[8] = { TSI148_LCSR_OT0, TSI148_LCSR_OT1,
 #define TSI148_LCSR_OFFSET_OTAT		0x1C
 
 /*
- * VMEbus interupt ack
+ * VMEbus interrupt ack
  * offset  200
  */
 #define TSI148_LCSR_VIACK1	0x204
@@ -613,7 +613,7 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
 /*
  *  PCI-X Status Register (CRG +$054)
  */
-#define TSI148_PCFS_PCIXSTAT_RSCEM     (1<<29)	/* Recieved Split Comp Error */
+#define TSI148_PCFS_PCIXSTAT_RSCEM     (1<<29)	/* Received Split Comp Error */
 #define TSI148_PCFS_PCIXSTAT_DMCRS_M   (7<<26)	/* max Cumulative Read Size */
 #define TSI148_PCFS_PCIXSTAT_DMOST_M   (7<<23)	/* max outstanding Split Trans
 						 */
@@ -982,8 +982,8 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
 #define TSI148_LCSR_VICR_CNTS_IRQ1     (2<<22)	/* IRQ1 to Cntr */
 #define TSI148_LCSR_VICR_CNTS_IRQ2     (3<<22)	/* IRQ2 to Cntr */
 
-#define TSI148_LCSR_VICR_EDGIS_M       (3<<20)	/* Edge interupt MASK */
-#define TSI148_LCSR_VICR_EDGIS_DIS     (1<<20)	/* Edge interupt Disable */
+#define TSI148_LCSR_VICR_EDGIS_M       (3<<20)	/* Edge interrupt MASK */
+#define TSI148_LCSR_VICR_EDGIS_DIS     (1<<20)	/* Edge interrupt Disable */
 #define TSI148_LCSR_VICR_EDGIS_IRQ1    (2<<20)	/* IRQ1 to Edge */
 #define TSI148_LCSR_VICR_EDGIS_IRQ2    (3<<20)	/* IRQ2 to Edge */
 
diff --git a/drivers/staging/vme/vme_api.txt b/drivers/staging/vme/vme_api.txt
index a910a0c4388..4910e92c52a 100644
--- a/drivers/staging/vme/vme_api.txt
+++ b/drivers/staging/vme/vme_api.txt
@@ -6,7 +6,7 @@ Driver registration
 
 As with other subsystems within the Linux kernel, VME device drivers register
 with the VME subsystem, typically called from the devices init routine.  This is
-achieved via a call to the follwoing function:
+achieved via a call to the following function:
 
 	int vme_register_driver (struct vme_driver *driver);
 
@@ -108,7 +108,7 @@ Master windows
 ==============
 
 Master windows provide access from the local processor[s] out onto the VME bus.
-The number of windows available and the available access modes is dependant on
+The number of windows available and the available access modes is dependent on
 the underlying chipset. A window must be configured before it can be used.
 
 
@@ -163,7 +163,7 @@ Slave windows
 
 Slave windows provide devices on the VME bus access into mapped portions of the
 local memory. The number of windows available and the access modes that can be
-used is dependant on the underlying chipset. A window must be configured before
+used is dependent on the underlying chipset. A window must be configured before
 it can be used.
 
 
diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig
index 061e730df2d..c3ba693a8ca 100644
--- a/drivers/staging/vt6655/Kconfig
+++ b/drivers/staging/vt6655/Kconfig
@@ -1,6 +1,6 @@
 config VT6655
    tristate "VIA Technologies VT6655 support"
-   depends on PCI && WLAN
+   depends on PCI && WLAN && m
    select WIRELESS_EXT
    select WEXT_PRIV
    ---help---
diff --git a/drivers/staging/vt6655/card.c b/drivers/staging/vt6655/card.c
index 951a3a8ddcb..2721e079849 100644
--- a/drivers/staging/vt6655/card.c
+++ b/drivers/staging/vt6655/card.c
@@ -1186,7 +1186,7 @@ CARDbStartMeasure (
             wDuration += 1; // 1 TU for channel switching
 
             if ((LODWORD(qwStartTSF) == 0) && (HIDWORD(qwStartTSF) == 0)) {
-                // start imediately by setting start TSF == current TSF + 2 TU
+                // start immediately by setting start TSF == current TSF + 2 TU
                 LODWORD(qwStartTSF) = LODWORD(qwCurrTSF) + 2048;
                 HIDWORD(qwStartTSF) = HIDWORD(qwCurrTSF);
                 if (LODWORD(qwCurrTSF) > LODWORD(qwStartTSF)) {
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index efaf19bc07b..ad39c8727e9 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -137,7 +137,7 @@ DEVICE_PARAM(TxDescriptors1,"Number of transmit descriptors1");
 /* IP_byte_align[] is used for IP header unsigned long byte aligned
    0: indicate the IP header won't be unsigned long byte aligned.(Default) .
    1: indicate the IP header will be unsigned long byte aligned.
-      In some enviroment, the IP header should be unsigned long byte aligned,
+      In some environment, the IP header should be unsigned long byte aligned,
       or the packet will be droped when we receive it. (eg: IPVS)
 */
 DEVICE_PARAM(IP_byte_align,"Enable IP header dword aligned");
diff --git a/drivers/staging/vt6655/wcmd.c b/drivers/staging/vt6655/wcmd.c
index abd6745bc3f..c30170a2bc4 100644
--- a/drivers/staging/vt6655/wcmd.c
+++ b/drivers/staging/vt6655/wcmd.c
@@ -587,7 +587,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
             if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_JOINTED)) {
 
 		// Call mgr to begin the deauthentication
-                // reason = (3) beacuse sta has left ESS
+                // reason = (3) because sta has left ESS
                 if (pMgmt->eCurrState>= WMAC_STATE_AUTH) {
                     vMgrDeAuthenBeginSta((void *)pDevice, pMgmt, pMgmt->abyCurrBSSID, (3), &Status);
                 }
diff --git a/drivers/staging/vt6655/wmgr.h b/drivers/staging/vt6655/wmgr.h
index 141e80b843a..e3ae562f521 100644
--- a/drivers/staging/vt6655/wmgr.h
+++ b/drivers/staging/vt6655/wmgr.h
@@ -220,7 +220,7 @@ typedef enum tagWMAC_POWER_MODE {
 */
 
 
-// Tx Managment Packet descriptor
+// Tx Management Packet descriptor
 typedef struct tagSTxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
@@ -230,7 +230,7 @@ typedef struct tagSTxMgmtPacket {
 } STxMgmtPacket, *PSTxMgmtPacket;
 
 
-// Rx Managment Packet descriptor
+// Rx Management Packet descriptor
 typedef struct tagSRxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
diff --git a/drivers/staging/vt6656/Kconfig b/drivers/staging/vt6656/Kconfig
index a441ba513c4..f89ab205c8e 100644
--- a/drivers/staging/vt6656/Kconfig
+++ b/drivers/staging/vt6656/Kconfig
@@ -1,6 +1,6 @@
 config VT6656
 	tristate "VIA Technologies VT6656 support"
-	depends on USB && WLAN
+	depends on USB && WLAN && m
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select FW_LOADER
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index 8f18578a590..5185d61564d 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -1938,7 +1938,7 @@ s_vGenerateMACHeader (
  *  Out:
  *      none
  *
- * Return Value: CMD_STATUS_PENDING if MAC Tx resource avaliable; otherwise FALSE
+ * Return Value: CMD_STATUS_PENDING if MAC Tx resource available; otherwise FALSE
  *
 -*/
 
diff --git a/drivers/staging/vt6656/wcmd.c b/drivers/staging/vt6656/wcmd.c
index b83b660b1f0..019fb52de36 100644
--- a/drivers/staging/vt6656/wcmd.c
+++ b/drivers/staging/vt6656/wcmd.c
@@ -421,7 +421,7 @@ void vRunCommand(void *hDeviceContext)
                     pMgmt->eScanState = WMAC_IS_SCANNING;
                     pDevice->byScanBBType = pDevice->byBBType;  //lucas
                     pDevice->bStopDataPkt = TRUE;
-                    // Turn off RCR_BSSID filter everytime
+                    // Turn off RCR_BSSID filter every time
                     MACvRegBitsOff(pDevice, MAC_REG_RCR, RCR_BSSID);
                     pDevice->byRxMode &= ~RCR_BSSID;
 
@@ -604,7 +604,7 @@ void vRunCommand(void *hDeviceContext)
             // if Infra mode
             if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_JOINTED)) {
                 // Call mgr to begin the deauthentication
-                // reason = (3) beacuse sta has left ESS
+                // reason = (3) because sta has left ESS
 	      if (pMgmt->eCurrState >= WMAC_STATE_AUTH) {
 		vMgrDeAuthenBeginSta((void *)pDevice,
 				     pMgmt,
diff --git a/drivers/staging/vt6656/wmgr.h b/drivers/staging/vt6656/wmgr.h
index 594f3a89d8a..13dfb3bf832 100644
--- a/drivers/staging/vt6656/wmgr.h
+++ b/drivers/staging/vt6656/wmgr.h
@@ -218,7 +218,7 @@ typedef enum tagWMAC_POWER_MODE {
 
 
 
-// Tx Managment Packet descriptor
+// Tx Management Packet descriptor
 typedef struct tagSTxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
@@ -228,7 +228,7 @@ typedef struct tagSTxMgmtPacket {
 } STxMgmtPacket, *PSTxMgmtPacket;
 
 
-// Rx Managment Packet descriptor
+// Rx Management Packet descriptor
 typedef struct tagSRxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasdma.c b/drivers/staging/westbridge/astoria/api/src/cyasdma.c
index 16b8ec12451..c461d4f60bf 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasdma.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasdma.c
@@ -1082,7 +1082,7 @@ cy_as_dma_received_data(cy_as_device *dev_p,
 	/*
 	 * if the data received exceeds the size of the DMA buffer,
 	 * clip the data to the size of the buffer.  this can lead
-	 * to loosing some data, but is not different than doing
+	 * to losing some data, but is not different than doing
 	 * non-packet reads on the other endpoints.
 	 */
 	if (dsize > dma_p->size - dma_p->offset)
diff --git a/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c b/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c
index 60b6f352533..76821e51b81 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c
@@ -126,7 +126,7 @@ find_endpoint_directions(cy_as_device *dev_p,
 	cy_as_physical_endpoint_state desired;
 
 	/*
-	 * note, there is no error checking here becuase
+	 * note, there is no error checking here because
 	 * ISO error checking happens when the API is called.
 	 */
 	for (i = 0; i < 10; i++) {
diff --git a/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c b/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c
index d43dd858de5..96a86d08830 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c
@@ -432,7 +432,7 @@ cy_as_mail_box_queued_data_handler(cy_as_device *dev_p)
 * is received.  When a complete request is received, the callback
 * associated with requests on that context is called.  When a complete
 * response is recevied, the callback associated with the request that
-* generated the reponse is called.
+* generated the response is called.
 */
 void
 cy_as_mail_box_interrupt_handler(cy_as_device *dev_p)
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasmisc.c b/drivers/staging/westbridge/astoria/api/src/cyasmisc.c
index 7852410b0a4..4564fc11df2 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasmisc.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasmisc.c
@@ -428,7 +428,7 @@ my_misc_callback(cy_as_device *dev_p, uint8_t context,
 				if (v & CY_AS_MEM_P0_VM_SET_CFGMODE)
 					cy_as_hal_print_message(
 					"initialization message "
-					"recieved, but config bit "
+					"received, but config bit "
 					"still set\n");
 
 				v = cy_as_hal_read_register(dev_p->tag,
@@ -436,7 +436,7 @@ my_misc_callback(cy_as_device *dev_p, uint8_t context,
 				if ((v & CY_AS_MEM_RST_RSTCMPT) == 0)
 					cy_as_hal_print_message(
 					"initialization message "
-					"recieved, but reset complete "
+					"received, but reset complete "
 					"bit still not set\n");
 			}
 			break;
@@ -2381,7 +2381,7 @@ try_wakeup_again:
 	/*
 	 * release the west bridge micro-_controller from reset,
 	 * so that firmware initialization can complete. the attempt
-	 * to release antioch reset is made upto 8 times.
+	 * to release antioch reset is made up to 8 times.
 	 */
 	v = 0x03;
 	count = 0x08;
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasmtp.c b/drivers/staging/westbridge/astoria/api/src/cyasmtp.c
index 36898463387..8598364f7ab 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasmtp.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasmtp.c
@@ -346,7 +346,7 @@ cy_as_mtp_start(cy_as_device_handle handle,
 
 		dev_p->mtp_event_cb = event_c_b;
 		/*
-		* we register here becuase the start request may cause
+		* we register here because the start request may cause
 		* events to occur before the response to the start request.
 		*/
 		cy_as_ll_register_request_callback(dev_p,
@@ -424,7 +424,7 @@ my_handle_response_mtp_stop(cy_as_device *dev_p,
 		goto destroy;
 
 	/*
-	* we sucessfully shutdown the stack, so decrement
+	* we successfully shutdown the stack, so decrement
 	* to make the count zero.
 	*/
 	dev_p->mtp_count--;
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasstorage.c b/drivers/staging/westbridge/astoria/api/src/cyasstorage.c
index 2451404b88d..7abd6a35e82 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasstorage.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasstorage.c
@@ -1773,7 +1773,7 @@ cy_as_storage_async_oper(cy_as_device *dev_p, cy_as_end_point_number_t ep,
 	if (unit > 255)
 		return CY_AS_ERROR_NO_SUCH_UNIT;
 
-	/* We are supposed to return sucess if the number of
+	/* We are supposed to return success if the number of
 	* blocks is zero
 	*/
 	if (num_blocks == 0) {
@@ -1969,7 +1969,7 @@ cy_as_storage_sync_oper(cy_as_device *dev_p,
 	if (cy_as_device_is_usb_async_pending(dev_p, 6))
 		return CY_AS_ERROR_ASYNC_PENDING;
 
-	/* We are supposed to return sucess if the number of
+	/* We are supposed to return success if the number of
 	* blocks is zero
 	*/
 	if (num_blocks == 0)
@@ -3285,7 +3285,7 @@ cy_as_sdio_extended_i_o_async(
 	if (callback == 0)
 		return CY_AS_ERROR_NULL_CALLBACK;
 
-	/* We are supposed to return sucess if the number of
+	/* We are supposed to return success if the number of
 	 * blocks is zero
 	 */
 	if (((misc_buf&CY_SDIO_BLOCKMODE) != 0) && (argument == 0)) {
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasusb.c b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
index 92ea42503bf..1b55e611191 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasusb.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
@@ -739,7 +739,7 @@ cy_as_usb_start(cy_as_device_handle handle,
 		cy_as_usb_reset_e_p0_state(dev_p);
 
 		/*
-		* we register here becuase the start request may cause
+		* we register here because the start request may cause
 		* events to occur before the response to the start request.
 		*/
 		cy_as_ll_register_request_callback(dev_p,
@@ -867,7 +867,7 @@ my_handle_response_usb_stop(cy_as_device *dev_p,
 		goto destroy;
 
 	/*
-	 * we sucessfully shutdown the stack, so
+	 * we successfully shutdown the stack, so
 	 * decrement to make the count zero.
 	 */
 	cy_as_usb_cleanup(dev_p);
diff --git a/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c b/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c
index 21cdb0637be..3bcedce13f4 100644
--- a/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c
+++ b/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c
@@ -87,7 +87,7 @@
 
 
 /*
- * For performance reasons, we handle storage endpoint transfers upto 4 KB
+ * For performance reasons, we handle storage endpoint transfers up to 4 KB
  * within the HAL itself.
  */
  #define CYASSTORAGE_WRITE_EP_NUM	(4)
@@ -108,12 +108,12 @@
 				((ep) == 6) || ((ep) == 8))
 
 /*
- * persistant, stores current GPMC interface cfg mode
+ * persistent, stores current GPMC interface cfg mode
  */
 static uint8_t pnand_16bit;
 
 /*
- * keep processing new WB DRQ in ISR untill all handled (performance feature)
+ * keep processing new WB DRQ in ISR until all handled (performance feature)
  */
 #define PROCESS_MULTIPLE_DRQ_IN_ISR (1)
 
@@ -157,7 +157,7 @@ typedef struct cy_as_hal_endpoint_dma {
 	 * dma_xfer_sz - size of the next dma xfer on P port
 	 * seg_xfer_cnt -  counts xfered bytes for in current sg_list
 	 *		memory segment
-	 * req_xfer_cnt - total number of bytes transfered so far in
+	 * req_xfer_cnt - total number of bytes transferred so far in
 	 *		current request
 	 * req_length - total request length
 	 */
@@ -2160,7 +2160,7 @@ void cy_as_hal_mem_set(void *ptr, uint8_t value, uint32_t cnt)
 /*
  * This function is expected to create a sleep channel.
  * The data structure that represents the sleep channel object
- * sleep channel (which is Linux "wait_queue_head_t wq" for this paticular HAL)
+ * sleep channel (which is Linux "wait_queue_head_t wq" for this particular HAL)
  * passed as a pointer, and allpocated by the caller
  * (typically as a local var on the stack) "Create" word should read as
  * "SleepOn", this func doesn't actually create anything
@@ -2364,7 +2364,7 @@ int start_o_m_a_p_kernel(const char *pgm,
 	 */
 	cy_as_hal_gpmc_enable_16bit_bus(cy_true);
 #else
-   /* Astoria and GPMC are already in 8 bit mode, jsut initialize PNAND_CFG */
+   /* Astoria and GPMC are already in 8 bit mode, just initialize PNAND_CFG */
 	ast_p_nand_casdi_write(CY_AS_MEM_PNAND_CFG, 0x0000);
 #endif
 
diff --git a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h
index 80dd530bc4f..6426ea61f3d 100644
--- a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h
+++ b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h
@@ -20,7 +20,7 @@
 */
 
 /*
- * This file contains the defintion of the hardware abstraction
+ * This file contains the definition of the hardware abstraction
  * layer on OMAP3430 talking to the West Bridge Astoria device
  */
 
diff --git a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h
index 3eee192ffe8..46f06ee2935 100644
--- a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h
+++ b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h
@@ -51,7 +51,7 @@
  * 							GPMC_ADDR
  *							[A8:A1]->upD[7:0]
  * INT#	-GPMC_nWP_GPIO_62
- * DACK	-N/C				 not conected
+ * DACK	-N/C				 not connected
  * WAKEUP-GPIO_167
  * RESET-GPIO_126
  * R/B	-GPMC_WAIT2_GPIO_64
@@ -108,7 +108,7 @@
 	 *					will be monitored
 	 * PF_EN_ENGINE - 1- ENABLES ENGINE, but it needs to be started after
 	 *					that C ctrl reg bit 0
-	 * PF_FIFO_THRESHOLD - FIFO threshhold in number of BUS(8 or 16) words
+	 * PF_FIFO_THRESHOLD - FIFO threshold in number of BUS(8 or 16) words
 	 * PF_WEIGHTED_PRIO  - NUM of cycles granted to PFE if RND_ROBIN
 	 *					prioritization is enabled
 	 * PF_ROUND_ROBIN  - if enabled, gives priority to other CS, but
diff --git a/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c b/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c
index 0bbb8a3e191..d1996a27515 100644
--- a/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c
+++ b/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c
@@ -222,7 +222,7 @@ static int cyasblkdev_queue_thread(void *d)
 			continue;
 		}
 
-		/* new req recieved, issue it to the driver  */
+		/* new req received, issue it to the driver  */
 		set_current_state(TASK_RUNNING);
 
 		#ifndef WESTBRIDGE_NDEBUG
diff --git a/drivers/staging/westbridge/astoria/gadget/cyasgadget.c b/drivers/staging/westbridge/astoria/gadget/cyasgadget.c
index defa05cd5e5..be851ca54ce 100644
--- a/drivers/staging/westbridge/astoria/gadget/cyasgadget.c
+++ b/drivers/staging/westbridge/astoria/gadget/cyasgadget.c
@@ -587,6 +587,7 @@ static int cyasgadget_enable(
 			"cy_as_usb_end_point_config EP %s mismatch "
 			"on enabled\n", an_ep->usb_ep_inst.name);
 		#endif
+		spin_unlock_irqrestore(&an_dev->lock, flags);
 		return -EINVAL;
 	}
 
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h
index 0c0726b678a..6452a907009 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h
@@ -119,7 +119,7 @@
 #define CY_AS_REQUEST_LIST_STATE_QUEUED (0x00)
 /* The request is sent, waiting for response */
 #define CY_AS_REQUEST_LIST_STATE_WAITING (0x01)
-/* The response has been received, processing reponse */
+/* The response has been received, processing response */
 #define CY_AS_REQUEST_LIST_STATE_RECEIVED (0x02)
 /* The request/response is being canceled */
 #define CY_AS_REQUEST_LIST_STATE_CANCELING (0x03)
@@ -517,7 +517,7 @@ typedef struct cy_as_context {
 	cy_as_ll_request_list_node *request_queue_p;
 	/* The list node in the request queue */
 	cy_as_ll_request_list_node *last_node_p;
-	/* Index upto which data is stored. */
+	/* Index up to which data is stored. */
 	uint16_t queue_index;
 	/* Index to the next request in the queue. */
 	uint16_t rqt_index;
@@ -768,7 +768,7 @@ struct cy_as_device {
 	uint32_t mtp_count;
 	/* The MTP event callback supplied by the client */
 	cy_as_mtp_event_callback mtp_event_cb;
-	/* The current block table to be transfered */
+	/* The current block table to be transferred */
 	cy_as_mtp_block_table *tp_blk_tbl;
 
 	cy_as_c_b_queue *func_cbs_mtp;
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h
index 8dab5e90014..16dc9f96018 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h
@@ -108,7 +108,7 @@ typedef enum cy_as_dma_direction {
    completes a requested DMA operation.
 
    Returns
-   CY_AS_ERROR_SUCCESS - the module initialized sucessfully
+   CY_AS_ERROR_SUCCESS - the module initialized successfully
    CY_AS_ERROR_OUT_OF_MEMORY - memory allocation failed during
 		initialization
    CY_AS_ERROR_ALREADY_RUNNING - the DMA module was already running
@@ -131,7 +131,7 @@ cy_as_dma_start(
    then freeing the resources associated with each DMA endpoint.
 
    Returns
-   CY_AS_ERROR_SUCCESS - the module shutdown sucessfully
+   CY_AS_ERROR_SUCCESS - the module shutdown successfully
    CY_AS_ERROR_NOT_RUNNING - the DMA module was not running
 
    See Also
@@ -161,7 +161,7 @@ cy_as_dma_stop(
 
    Returns
    CY_AS_ERROR_SUCCESS - the traffic on the endpoint is canceled
-	sucessfully
+	successfully
 
    See Also
 */
@@ -266,7 +266,7 @@ cy_as_dma_queue_request(
    will have to maintain a list of sleep channels to wake.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the queue has drained sucessfully
+   * CY_AS_ERROR_SUCCESS - the queue has drained successfully
    * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given is not valid
    * CY_AS_ERROR_NESTED_SLEEP - CyAsDmaQueueRequest() was requested
    *	on an endpoint where CyAsDmaQueueRequest was already called
@@ -295,7 +295,7 @@ cy_as_dma_drain_queue(
    CyAsHalDmaSetupRead() functoins.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the value was set sucessfully
+   * CY_AS_ERROR_SUCCESS - the value was set successfully
    * CY_AS_ERROR_INVALID_SIZE - the size value was not valid
 */
 extern cy_as_return_status_t
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h
index f78d60270d4..2cd0af1ed78 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h
@@ -29,7 +29,7 @@
 */
 
 /* Summary
-   The function completed sucessfully
+   The function completed successfully
 */
 #define CY_AS_ERROR_SUCCESS	 (0)
 
@@ -796,7 +796,7 @@
    Description
    This error is returned when an operation is attempted that cannot be
    completed while the USB stack is connected to a USB host.  In order
-   to sucessfully complete the desired operation, CyAsUsbDisconnect()
+   to successfully complete the desired operation, CyAsUsbDisconnect()
    must be called to disconnect from the host.
 */
 #define CY_AS_ERROR_USB_CONNECTED (53)
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h
index 28136ad7511..5bcbe9bf2f5 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h
@@ -597,7 +597,7 @@ cy_as_mem_set(
    CyAsHalSleepChannel.
 
    Returns
-   CyTrue is the initialization was sucessful, and CyFalse otherwise
+   CyTrue is the initialization was successful, and CyFalse otherwise
 
    See Also
    * CyAsHalSleepChannel
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h
index 3d7063ea309..60a6fffb5d5 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h
@@ -69,7 +69,7 @@ cy_as_intr_start(
 
    Returns
    * CY_AS_ERROR_SUCCESS - the interrupt module was stopped
-   *	sucessfully
+   *	successfully
    * CY_AS_ERROR_NOT_RUNNING - the interrupt module was not
    *	running
 
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h
index 2f070185056..df7c2b66cf2 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h
@@ -620,7 +620,7 @@ cy_as_misc_in_standby(
    * Nestable: YES
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the firmware was sucessfully downloaded
+   * CY_AS_ERROR_SUCCESS - the firmware was successfully downloaded
    * CY_AS_ERROR_INVALID_HANDLE
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
    *	was not configured
@@ -836,7 +836,7 @@ cy_as_misc_reset(
    ownership.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the p port sucessfully acquired the
+   * CY_AS_ERROR_SUCCESS - the p port successfully acquired the
    * 	resource of interest
    * CY_AS_ERROR_INVALID_HANDLE
    * CY_AS_ERROR_NOT_CONFIGURED
@@ -879,7 +879,7 @@ cy_as_misc_acquire_resource(
    * Valid In Asynchronous Callback: NO
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the p port sucessfully released
+   * CY_AS_ERROR_SUCCESS - the p port successfully released
    *	the resource of interest
    * CY_AS_ERROR_INVALID_HANDLE
    * CY_AS_ERROR_NOT_CONFIGURED
@@ -929,7 +929,7 @@ cy_as_misc_release_resource(
 
    Returns
    * CY_AS_ERROR_SUCCESS - the trace configuration has been
-   *	sucessfully changed
+   *	successfully changed
    * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not exist
    * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
    *	pair does not exist
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h
index 317805fc4ff..773b645ea7e 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h
@@ -756,7 +756,7 @@
 	 * 1 : Debug mode
 
    Description
-   This reponse is sent to return the firmware version
+   This response is sent to return the firmware version
    number to the requestor.
  */
 #define CY_RESP_FIRMWARE_VERSION (16)
@@ -3655,7 +3655,7 @@
    This request is sent to the West Bridge when the P port
    needs to send data to the Host in a Turbo Endpoint.
    Upon receiving this event, Firmware will make the end point
-   avilable for the P port. If the length is zero, then
+   available for the P port. If the length is zero, then
    firmware will send a zero length packet.
 
    Direction
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
index 64f078cf202..52b93c3e481 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
@@ -832,7 +832,7 @@ typedef struct cy_as_sdio_func {
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
    *	loaded into West Bridge
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed in
-   * CY_AS_ERROR_SUCCESS - the module started sucessfully
+   * CY_AS_ERROR_SUCCESS - the module started successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
    *	with the West Bridge device
    * CY_AS_ERROR_OUT_OF_MEMORY
@@ -882,7 +882,7 @@ cy_as_storage_start(
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
    *	passed in
    * CY_AS_ERROR_SUCCESS - this module was shut
-   *	down sucessfully
+   *	down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred
    *	communicating with the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING
@@ -934,7 +934,7 @@ cy_as_storage_stop(
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle
    *	was passed in
    * CY_AS_ERROR_SUCCESS - the function was registered
-   *	sucessfully
+   *	successfully
    * CY_AS_ERROR_NOT_RUNNING - the stack is not running
 
    See Also
@@ -981,7 +981,7 @@ cy_as_storage_register_callback(
    *	been started
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
    *	passed in
-   * CY_AS_ERROR_SUCCESS - this request was sucessfully
+   * CY_AS_ERROR_SUCCESS - this request was successfully
    *	transmitted to the West Bridge device
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
    *	with the West Bridge device
@@ -1034,7 +1034,7 @@ cy_as_storage_claim(
    *	been started
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle
    *	was passed in
-   * CY_AS_ERROR_SUCCESS - the media was sucessfully
+   * CY_AS_ERROR_SUCCESS - the media was successfully
    *	released
    * CY_AS_ERROR_MEDIA_NOT_CLAIMED - the media was not
    *	claimed by the P port
@@ -1905,7 +1905,7 @@ cy_as_storage_get_transfer_amount(
    differ between SD cards.
 
    A large erase can take a while to complete depending on the SD
-   card. In such a case it is reccomended that an async call is made.
+   card. In such a case it is recommended that an async call is made.
 
    Returns
    * CY_AS_ERROR_SUCCESS - API call completed successfully
@@ -1926,7 +1926,7 @@ cy_as_storage_get_transfer_amount(
    *	required before erase is allowed
    * CY_AS_ERROR_NO_SUCH_BUS
    * CY_AS_ERROR_NO_SUCH_DEVICE
-   * CY_AS_ERROR_NOT_SUPPORTED - Erase is currenly only supported
+   * CY_AS_ERROR_NOT_SUPPORTED - Erase is currently only supported
    *	on SD and using SD only firmware
    * CY_AS_ERROR_OUT_OF_MEMORY
 
@@ -1985,7 +1985,7 @@ cy_as_storage_erase(
    *	type was made
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	recieved from the firmware
+   *	received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *	reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made to
@@ -2047,7 +2047,7 @@ cy_as_sdio_get_c_i_s_info(
    *	pair does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	recieved from the firmware
+   *	received from the firmware
 
 */
 cy_as_return_status_t
@@ -2095,7 +2095,7 @@ cy_as_sdio_query_card(
    *	pair does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	recieved from the firmware
+   *	received from the firmware
    */
 cy_as_return_status_t
 cy_as_sdio_reset_card(
@@ -2139,7 +2139,7 @@ cy_as_sdio_reset_card(
    * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device pair
    *	does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was recieved
+   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
    *	from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in reading
    *	from the media
@@ -2198,7 +2198,7 @@ cy_as_sdio_direct_read(
    * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
    * pair does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was recieved
+   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
    * from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    * reading from the media
@@ -2262,7 +2262,7 @@ cy_as_sdio_direct_write(
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory
    *	available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	recieved from the firmware
+   *	received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *	reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
@@ -2319,7 +2319,7 @@ cy_as_sdio_set_blocksize(
    *	pair does not exist
    * CY_AS_ERROR_ASYNC_PENDING - an async operation is pending
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was recieved
+   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
    *	from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *	reading from the media
@@ -2396,7 +2396,7 @@ cy_as_sdio_extended_read(
    * CY_AS_ERROR_ASYNC_PENDING - an async operation is pending
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	recieved from the firmware
+   *	received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *	reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
@@ -2471,7 +2471,7 @@ cy_as_sdio_extended_write(
    * pair does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	recieved from the firmware
+   *	received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *	reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
@@ -2714,7 +2714,7 @@ cy_as_sdio_suspend(
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory
    *	available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	recieved from the firmware
+   *	received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error
    *	in reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
index 4a549e14681..e3ba9ca4c75 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
@@ -464,7 +464,7 @@ typedef struct cy_as_usb_end_point_config {
    be selected on a partitioned storage device.
 
    Description
-   West Bridge firmware supports creating upto two
+   West Bridge firmware supports creating up to two
    partitions on mass storage devices connected to
    West Bridge.  When there are two partitions on a device,
    the user can choose which of these partitions should be
@@ -698,7 +698,7 @@ cy_as_usb_start(
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
    *	into West Bridge
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *	the West Bridge device
 
@@ -752,7 +752,7 @@ cy_as_usb_register_callback(
    * Nestable: YES
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -791,7 +791,7 @@ cy_as_usb_connect(
    * Nestable: YES
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -825,7 +825,7 @@ cy_as_usb_disconnect(
    * Valid In Asynchronous Callback: Yes (if cb supplied)
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -855,13 +855,13 @@ cy_as_usb_set_enum_config(
    the USB stack
 
    Description
-   This function sends a request to West Bridge to retreive
+   This function sends a request to West Bridge to retrieve
    the current configuration
 
    * Valid In Asynchronous Callback: Yes (if cb supplied)
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -906,7 +906,7 @@ cy_as_usb_get_enum_config(
    Chapter 9.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -993,7 +993,7 @@ cy_as_usb_clear_descriptors(
    Description
    This data structure the buffer to hold the descriptor
    data, and an in/out parameter ti indicate the
-   lenght of the buffer and descriptor data in bytes.
+   length of the buffer and descriptor data in bytes.
 
    See Also
    * CyAsUsbGetDescriptor
@@ -1027,7 +1027,7 @@ typedef struct cy_as_get_descriptor_data {
    Chapter 9.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1106,7 +1106,7 @@ cy_as_usb_get_descriptor(
    * Valid In Asynchronous Callback: NO
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1140,7 +1140,7 @@ cy_as_usb_set_physical_configuration(
    Add documentation about endpoint configuration limitations
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1181,7 +1181,7 @@ cy_as_usb_set_end_point_config(
    * Valid In Asynchronous Callback: NO
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *	been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1219,7 +1219,7 @@ cy_as_usb_get_end_point_config(
    functions store away the configuration information and this
    CyAsUsbCommitConfig() actually finds the
    best hardware configuration based on the requested endpoint
-   configuration and sends thsi optimal
+   configuration and sends this optimal
    confiuration down to the West Bridge device.
 
    * Valid In Asynchronous Callback: YES (if cb supplied)
@@ -1268,7 +1268,7 @@ cy_as_usb_commit_config(
    * Valid In Asynchronous Callback: NO
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *	the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1311,7 +1311,7 @@ cy_as_usb_read_data(
    * Valid In Asynchronous Callback: YES
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *	the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1355,7 +1355,7 @@ cy_as_usb_read_data_async(
    a zero length packet transmitted to the USB host.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *	the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1395,7 +1395,7 @@ cy_as_usb_write_data(
    in a zero length packet transmitted to the USB host.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *	the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1435,7 +1435,7 @@ cy_as_usb_write_data_async(
 
    Returns
    * CY_AS_ERROR_SUCCESS - this module was shut down
-   *	sucessfully
+   *	successfully
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not
    *	running
    * CY_AS_ERROR_ASYNC_NOT_PENDING - no asynchronous USB
@@ -1791,7 +1791,7 @@ cy_as_usb_set_m_s_report_threshold(
    device should be made visible to USB.
 
    Description
-   West Bridge firmware supports the creation of upto two
+   West Bridge firmware supports the creation of up to two
    partitions on mass storage devices connected to the West Bridge
    device.  When there are two partitions on a device, the user can
    choose which of these partitions should be made visible to the
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index 9cfea94bcea..c9f0e8f856a 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -492,7 +492,7 @@ Mds_Tx(struct wbsoft_priv *adapter)
 
 			TxDesIndex = pMds->TxDesIndex; /* Get the current ID */
 			pTxDes->Descriptor_ID = TxDesIndex;
-			pMds->TxDesFrom[TxDesIndex] = 2; /* Storing the information of source comming from */
+			pMds->TxDesFrom[TxDesIndex] = 2; /* Storing the information of source coming from */
 			pMds->TxDesIndex++;
 			pMds->TxDesIndex %= MAX_USB_TX_DESCRIPTOR;
 
diff --git a/drivers/staging/wlags49_h2/README.ubuntu b/drivers/staging/wlags49_h2/README.ubuntu
index 47beaec86e4..edee8b9385b 100644
--- a/drivers/staging/wlags49_h2/README.ubuntu
+++ b/drivers/staging/wlags49_h2/README.ubuntu
@@ -116,7 +116,7 @@ LICENSE
 
 The Agere Systems license applies. This is why I include the original
 README.wlags49. The instructions in that file are bogus now. I also
-include the man page. Eventhough setting parameters on the module
+include the man page. Even though setting parameters on the module
 does not work anymore but it provides some information about all the
 settings.
 
diff --git a/drivers/staging/wlags49_h2/TODO b/drivers/staging/wlags49_h2/TODO
index 14aa415b1a8..94032b6ac2b 100644
--- a/drivers/staging/wlags49_h2/TODO
+++ b/drivers/staging/wlags49_h2/TODO
@@ -1,7 +1,7 @@
 First of all, the best thing would be that this driver becomes obsolte by
 adding support for Hermes II and Hermes II.5 cards to the existing orinoco
 driver. The orinoco driver currently only supports Hermes I based cards.
-Since this will not happen by magic and has not happend until now this
+Since this will not happen by magic and has not happened until now this
 driver provides a stop-gap solution for these type of cards.
 
 Having said that, the following wishlist comes to mind to make the driver
@@ -18,7 +18,7 @@ TODO:
 	- the driver is split into a Hermes II and a Hermes II.5 part, it
 	  would be nice to handle both with one module instead of two
 	- review by the wireless developer community
-	- verify the code against the coding standards for a propper linux
+	- verify the code against the coding standards for a proper linux
 	  driver
 	- resolve license issues (?)
 
diff --git a/drivers/staging/wlags49_h2/hcf.c b/drivers/staging/wlags49_h2/hcf.c
index d4bdd3ee8be..a73317ef935 100644
--- a/drivers/staging/wlags49_h2/hcf.c
+++ b/drivers/staging/wlags49_h2/hcf.c
@@ -540,7 +540,7 @@ HCF_STATIC hcf_16* BASED xxxx[ ] = {
 *
 *.CONDITIONS
 * Except for hcf_action with HCF_ACT_INT_FORCE_ON or HCF_ACT_INT_OFF as parameter or hcf_connect with an I/O
-* address (i.e. not HCF_DISCONNECT), all hcf-function calls MUST be preceeded by a call of hcf_action with
+* address (i.e. not HCF_DISCONNECT), all hcf-function calls MUST be preceded by a call of hcf_action with
 * HCF_ACT_INT_OFF as parameter.
 * Note that hcf_connect defaults to NIC interrupt disabled mode, i.e. as if hcf_action( HCF_ACT_INT_OFF )
 * was called.
@@ -843,7 +843,7 @@ hcf_16	i;
 *.MODULE		int hcf_cntl( IFBP ifbp, hcf_16 cmd )
 *.PURPOSE		Connect or disconnect a specific port to a specific network.
 *!!  ;???????????????? continue needs more explanation
-*				recovers by means of "continue" when the connect proces in CCX mode fails
+*				recovers by means of "continue" when the connect process in CCX mode fails
 *				Enables or disables data transmission and reception for the NIC.
 *				Activates static NIC configuration for a specific port at connect.
 *				Activates static configuration for all ports at enable.
@@ -1170,12 +1170,12 @@ LTV_STRCT	x;
 		io_addr = io_base;
 	}
 
-#if 0 //;? if a subsequent hcf_connect is preceeded by an hcf_disconnect the wakeup is not needed !!
+#if 0 //;? if a subsequent hcf_connect is preceded by an hcf_disconnect the wakeup is not needed !!
 #if HCF_SLEEP
     OUT_PORT_WORD( .....+HREG_IO, HREG_IO_WAKEUP_ASYNC ); 	    //OPW not yet useable
 	MSF_WAIT(800);								// MSF-defined function to wait n microseconds.
 	note that MSF_WAIT uses not yet defined!!!! IFB_IOBase and IFB_TickIni (via PROT_CNT_INI)
-	so be carefull if this code is restored
+	so be careful if this code is restored
 #endif // HCF_SLEEP
 #endif // 0
 
@@ -1563,7 +1563,7 @@ DESC_STRCT *p = descp->next_desc_addr;	//pointer to 2nd descriptor of frame
 * This function is called by the MSF to supply the HCF with new/more buffers for receive purposes.
 * The HCF can be used in 2 fashions: with and without encapsulation for data transfer.
 * This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant.
-* As a consequence, some additional constaints apply to the number of descriptor and the buffers associated
+* As a consequence, some additional constraints apply to the number of descriptor and the buffers associated
 * with the first 2 descriptors. Independent of the encapsulation feature, the COUNT fields are ignored.
 * A special case is the supplying of the DELWA descriptor, which must be supplied as the first descriptor.
 *
@@ -1735,7 +1735,7 @@ DESC_STRCT *descp;	// pointer to start of FrameList
 * - in case encapsulation by the HCF is selected:
 *	  -	The FrameList does not consists of at least 2 Descriptors.
 *	  -	The first databuffer does not contain exactly the (space for) the 802.11 header (== 28 words)
-*	  -	The first databuffer does not have a size to additionally accomodate the 802.3 header and the
+*	  -	The first databuffer does not have a size to additionally accommodate the 802.3 header and the
 *		SNAP header of the frame after encapsulation (== 39 words).
 *	  -	The second databuffer does not contain at least DA, SA and 'type/length' (==14 bytes or 7 words)
 *!! The 2nd part of the list of asserts should be kept in sync with put_frame_lst, in order to get
@@ -1762,14 +1762,14 @@ DESC_STRCT *descp;	// pointer to start of FrameList
 *	- Copy DA/SA fields from the 2nd buffer
 *   - Calculate total length of the message (snap-header + type-field + the length of all buffer fragments
 *     associated with the 802.3 frame (i.e all descriptors except the first), but not the DestinationAddress,
-*     SourceAddress and lenght-field)
+*     SourceAddress and length-field)
 *     Assert the message length
 *	  Write length. Note that the message is in BE format, hence on LE platforms the length must be converted
 *	  ;? THIS IS NOT WHAT CURRENTLY IS IMPLEMENTED
 *	- Write snap header. Note that the last byte of the snap header is NOT copied, that byte is already in
 *	  place as result of the call to hcf_encap.
 *	Note that there are many ways to skin a cat. To express the offsets in the 1st buffer while writing
-*	the snap header, HFS_TYPE is choosen as a reference point to make it easier to grasp that the snap header
+*	the snap header, HFS_TYPE is chosen as a reference point to make it easier to grasp that the snap header
 *	and encapsualtion type are at least relative in the right.
 *8:	modify 1st descriptor to reflect moved part of the 802.3 header + Snap-header
 *	modify 2nd descriptor to skip the moved part of the 802.3 header (DA/SA
@@ -1933,7 +1933,7 @@ hcf_16	t = (hcf_16)(*type<<8) + *(type+1);																/* 2 */
 *	HCF_SUCCESS			Success
 *!!	via cmd_exe ( type >= CFG_RID_FW_MIN )
 *	HCF_ERR_NO_NIC		NIC removed during retrieval
-*	HCF_ERR_TIME_OUT	Expected Hermes event did not occure in expected time
+*	HCF_ERR_TIME_OUT	Expected Hermes event did not occur in expected time
 *!!	via cmd_exe and setup_bap (type >= CFG_RID_FW_MIN )
 *	HCF_ERR_DEFUNCT_...	HCF is in defunct mode (bits 0x7F reflect cause)
 *
@@ -2958,7 +2958,7 @@ or
 *	hcf_service_nic is also skipped in those cases.
 *	To prevent that hcf_service_nic reports bogus information to the MSF with all - possibly difficult to
 *	debug - undesirable side effects, it is paramount to check the NIC presence. In former days the presence
-*	test was based on the Hermes register HREG_SW_0. Since in HCF_ACT_INT_OFF is choosen for strategy based on
+*	test was based on the Hermes register HREG_SW_0. Since in HCF_ACT_INT_OFF is chosen for strategy based on
 *	HREG_EV_STAT, this is now also used in hcf_service_nic. The motivation to change strategy is partly
 *	due to inconsistent F/W implementations with respect to HREG_SW_0 manipulation around reset and download.
 *	Note that in polled environments Card Removal is not detected by INT_OFF which makes the check in
@@ -4048,7 +4048,7 @@ hcf_32 FAR	*p4; //prevent side effects from macro
 	HCFASSERT( word_len == 0 || word_len == 2 || word_len == 4, word_len )
 	HCFASSERT( word_len == 0 || ((hcf_32)bufp & 1 ) == 0, (hcf_32)bufp )
 	HCFASSERT( word_len <= len, MERGE2( word_len, len ) )
-	//see put_frag for an alternative implementation, but be carefull about what are int's and what are
+	//see put_frag for an alternative implementation, but be careful about what are int's and what are
 	//hcf_16's
 	if ( word_len ) {								//.  if there is anything to convert
 hcf_8 c;
@@ -4712,7 +4712,7 @@ int rc = HCF_SUCCESS;
 *	Note that len is unsigned, so even MSF I/F violation works out O.K.
 *	The '2' in the expression "len+2" is used because 1 word is needed for L itself and 1 word is needed
 *	for the zero-sentinel
-*8:	update MailBox Info length report to MSF with "oldest" MB Info Block size. Be carefull here, if you get
+*8:	update MailBox Info length report to MSF with "oldest" MB Info Block size. Be careful here, if you get
 *	here before the MailBox is registered, you can't read from the buffer addressed by IFB_MBp (it is the
 *	Null buffer) so don't move this code till the end of this routine but keep it where there is garuanteed
 *	a buffer.
diff --git a/drivers/staging/wlags49_h2/hcfdef.h b/drivers/staging/wlags49_h2/hcfdef.h
index 4e20171b782..cb1966d8473 100644
--- a/drivers/staging/wlags49_h2/hcfdef.h
+++ b/drivers/staging/wlags49_h2/hcfdef.h
@@ -315,7 +315,7 @@ err: these values should match;
 
 #if HCF_DMA
 //************************* DMA (bus mastering)
-	// Be carefull to use these registers only at a genuine 32 bits NIC
+	// Be careful to use these registers only at a genuine 32 bits NIC
 	// On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences
 	// thereof, e.g.  HREG_DMA_CTRL register maps to HREG_CMD.
 #define HREG_DMA_CTRL						0x0040
diff --git a/drivers/staging/wlags49_h2/wl_wext.c b/drivers/staging/wlags49_h2/wl_wext.c
index 9e5da081537..522a31090c5 100644
--- a/drivers/staging/wlags49_h2/wl_wext.c
+++ b/drivers/staging/wlags49_h2/wl_wext.c
@@ -2575,7 +2575,7 @@ static int wireless_set_scan(struct net_device *dev, struct iw_request_info *inf
          * This looks like a nice place to test if the HCF is still
          * communicating with the card. It seems that sometimes BAP_1
          * gets corrupted. By looking at the comments in HCF the
-         * cause is still a mistery. Okay, the communication to the
+         * cause is still a mystery. Okay, the communication to the
          * card is dead, reset the card to revive.
          */
 	if((lp->hcfCtx.IFB_CardStat & CARD_STAT_DEFUNCT) != 0)
@@ -3924,7 +3924,7 @@ void wl_wext_event_mic_failed( struct net_device *dev )
 	memset( msg, 0, sizeof( msg ));
 
 
-	/* Becuase MIC failures are not part of the Wireless Extensions yet, they
+	/* Because MIC failures are not part of the Wireless Extensions yet, they
 	   must be passed as a string using an IWEVCUSTOM event. In order for the
 	   event to be effective, the string format must be known by both the
 	   driver and the supplicant. The following is the string format used by the
@@ -3999,7 +3999,7 @@ void wl_wext_event_assoc_ie( struct net_device *dev )
 		memcpy( &data.rawData, &( lp->ltvRecord.u.u8[1] ), 88 );
 		wpa_ie = wl_parse_wpa_ie( &data, &length );
 
-		/* Becuase this event (Association WPA-IE) is not part of the Wireless
+		/* Because this event (Association WPA-IE) is not part of the Wireless
 		Extensions yet, it must be passed as a string using an IWEVCUSTOM event.
 		In order for the event to be effective, the string format must be known
 		by both the driver and the supplicant. The following is the string format
diff --git a/drivers/staging/wlags49_h25/TODO b/drivers/staging/wlags49_h25/TODO
index 14aa415b1a8..94032b6ac2b 100644
--- a/drivers/staging/wlags49_h25/TODO
+++ b/drivers/staging/wlags49_h25/TODO
@@ -1,7 +1,7 @@
 First of all, the best thing would be that this driver becomes obsolte by
 adding support for Hermes II and Hermes II.5 cards to the existing orinoco
 driver. The orinoco driver currently only supports Hermes I based cards.
-Since this will not happen by magic and has not happend until now this
+Since this will not happen by magic and has not happened until now this
 driver provides a stop-gap solution for these type of cards.
 
 Having said that, the following wishlist comes to mind to make the driver
@@ -18,7 +18,7 @@ TODO:
 	- the driver is split into a Hermes II and a Hermes II.5 part, it
 	  would be nice to handle both with one module instead of two
 	- review by the wireless developer community
-	- verify the code against the coding standards for a propper linux
+	- verify the code against the coding standards for a proper linux
 	  driver
 	- resolve license issues (?)
 
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 473438893a1..fb466f4c92e 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -273,7 +273,7 @@ exit:
 }
 
 int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
-			   u8 key_index)
+			   u8 key_index, bool unicast, bool multicast)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 
diff --git a/drivers/staging/wlan-ng/prism2sta.c b/drivers/staging/wlan-ng/prism2sta.c
index ed751f418db..21f25a21c29 100644
--- a/drivers/staging/wlan-ng/prism2sta.c
+++ b/drivers/staging/wlan-ng/prism2sta.c
@@ -1976,7 +1976,7 @@ static wlandevice_t *create_wlan(void)
 
 	wlandev->nsdcaps = P80211_NSDCAP_HWFRAGMENT | P80211_NSDCAP_AUTOJOIN;
 
-	/* Initialize the device private data stucture. */
+	/* Initialize the device private data structure. */
 	hw->dot11_desired_bss_type = 1;
 
 	return wlandev;
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
index 8762a532769..9669c22cc82 100644
--- a/drivers/staging/xgifb/vb_setmode.c
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -7834,7 +7834,7 @@ unsigned short XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE,
 						== 600)) {
 			index++;
 		}
-		/* Alan 10/19/2007; do the similiar adjustment like XGISearchCRT1Rate() */
+		/* Alan 10/19/2007; do the similar adjustment like XGISearchCRT1Rate() */
 		if ((pVBInfo->RefIndex[RefreshRateTableIndex].XRes == 1024)
 				&& (pVBInfo->RefIndex[RefreshRateTableIndex].YRes
 						== 768)) {
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
index 4b87951f432..d613e84aab6 100644
--- a/drivers/staging/xgifb/vgatypes.h
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -85,7 +85,7 @@ struct xgi_hw_device_info
 					    unsigned long *);
 };
 
-/* Addtional IOCTL for communication xgifb <> X driver        */
+/* Additional IOCTL for communication xgifb <> X driver        */
 /* If changing this, xgifb.h must also be changed (for xgifb) */
 
 
diff --git a/drivers/target/Kconfig b/drivers/target/Kconfig
index 9ef2dbbfa62..5cb0f0ef6af 100644
--- a/drivers/target/Kconfig
+++ b/drivers/target/Kconfig
@@ -30,5 +30,6 @@ config TCM_PSCSI
 	passthrough access to Linux/SCSI device
 
 source "drivers/target/loopback/Kconfig"
+source "drivers/target/tcm_fc/Kconfig"
 
 endif
diff --git a/drivers/target/Makefile b/drivers/target/Makefile
index 1178bbfc68f..21df808a992 100644
--- a/drivers/target/Makefile
+++ b/drivers/target/Makefile
@@ -24,3 +24,5 @@ obj-$(CONFIG_TCM_PSCSI)		+= target_core_pscsi.o
 
 # Fabric modules
 obj-$(CONFIG_LOOPBACK_TARGET)	+= loopback/
+
+obj-$(CONFIG_TCM_FC)		+= tcm_fc/
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 2c5fcfed593..30cbb743d9b 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -496,8 +496,8 @@ static int core_alua_state_check(
 	nonop_delay_msecs = tg_pt_gp->tg_pt_gp_nonop_delay_msecs;
 	spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
 	/*
-	 * Process ALUA_ACCESS_STATE_ACTIVE_OPTMIZED in a seperate conditional
-	 * statement so the complier knows explictly to check this case first.
+	 * Process ALUA_ACCESS_STATE_ACTIVE_OPTMIZED in a separate conditional
+	 * statement so the compiler knows explicitly to check this case first.
 	 * For the Optimized ALUA access state case, we want to process the
 	 * incoming fabric cmd ASAP..
 	 */
@@ -1157,7 +1157,7 @@ void core_alua_free_lu_gp(struct t10_alua_lu_gp *lu_gp)
 		spin_unlock(&lu_gp->lu_gp_lock);
 		/*
 		 *
-		 * lu_gp_mem is assoicated with a single
+		 * lu_gp_mem is associated with a single
 		 * struct se_device->dev_alua_lu_gp_mem, and is released when
 		 * struct se_device is released via core_alua_free_lu_gp_mem().
 		 *
@@ -1429,7 +1429,7 @@ void core_alua_free_tg_pt_gp(
 		}
 		spin_unlock(&tg_pt_gp->tg_pt_gp_lock);
 		/*
-		 * tg_pt_gp_mem is assoicated with a single
+		 * tg_pt_gp_mem is associated with a single
 		 * se_port->sep_alua_tg_pt_gp_mem, and is released via
 		 * core_alua_free_tg_pt_gp_mem().
 		 *
@@ -1963,7 +1963,7 @@ int core_setup_alua(struct se_device *dev, int force_pt)
 		printk(KERN_INFO "%s: Enabling ALUA Emulation for SPC-3"
 			" device\n", TRANSPORT(dev)->name);
 		/*
-		 * Assoicate this struct se_device with the default ALUA
+		 * Associate this struct se_device with the default ALUA
 		 * LUN Group.
 		 */
 		lu_gp_mem = core_alua_allocate_lu_gp_mem(dev);
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 3fb8e32506e..d25e2082901 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -371,7 +371,7 @@ int core_update_device_list_for_node(
 	if (!(enable)) {
 		/*
 		 * deve->se_lun_acl will be NULL for demo-mode created LUNs
-		 * that have not been explictly concerted to MappedLUNs ->
+		 * that have not been explicitly concerted to MappedLUNs ->
 		 * struct se_lun_acl, but we remove deve->alua_port_list from
 		 * port->sep_alua_list. This also means that active UAs and
 		 * NodeACL context specific PR metadata for demo-mode
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index d57ad672677..1e193f32489 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -433,7 +433,7 @@ char *iscsi_parse_pr_out_transport_id(
 		/*
 		 * Go ahead and do the lower case conversion of the received
 		 * 12 ASCII characters representing the ISID in the TransportID
-		 * for comparision against the running iSCSI session's ISID from
+		 * for comparison against the running iSCSI session's ISID from
 		 * iscsi_target.c:lio_sess_get_initiator_sid()
 		 */
 		for (i = 0; i < 12; i++) {
diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index 02f553aef43..150c4305f38 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -159,7 +159,7 @@ static struct se_device *fd_create_virtdevice(
 #endif
 /*	flags |= O_DIRECT; */
 	/*
-	 * If fd_buffered_io=1 has not been set explictly (the default),
+	 * If fd_buffered_io=1 has not been set explicitly (the default),
 	 * use O_SYNC to force FILEIO writes to disk.
 	 */
 	if (!(fd_dev->fbd_flags & FDBD_USE_BUFFERED_IO))
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 2521f75362c..a79f518ca6e 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -478,7 +478,7 @@ static int core_scsi3_pr_seq_non_holder(
 		break;
 	}
 	/*
-	 * Case where the CDB is explictly allowed in the above switch
+	 * Case where the CDB is explicitly allowed in the above switch
 	 * statement.
 	 */
 	if (!(ret) && !(other_cdb)) {
@@ -3735,7 +3735,7 @@ static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
 		return PYX_TRANSPORT_LU_COMM_FAILURE;
 
 	if (cmd->data_length < 24) {
-		printk(KERN_WARNING "SPC-PR: Recieved PR OUT parameter list"
+		printk(KERN_WARNING "SPC-PR: Received PR OUT parameter list"
 			" length too small: %u\n", cmd->data_length);
 		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
 	}
@@ -3778,7 +3778,7 @@ static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
 	 */
 	if (!(spec_i_pt) && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) &&
 	    (cmd->data_length != 24)) {
-		printk(KERN_WARNING "SPC-PR: Recieved PR OUT illegal parameter"
+		printk(KERN_WARNING "SPC-PR: Received PR OUT illegal parameter"
 			" list length: %u\n", cmd->data_length);
 		return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
 	}
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index bf6aa8a9f1d..9583b23c9c8 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -719,7 +719,7 @@ static int transport_cmd_check_stop(
 			cmd->se_lun = NULL;
 			/*
 			 * Some fabric modules like tcm_loop can release
-			 * their internally allocated I/O refrence now and
+			 * their internally allocated I/O reference now and
 			 * struct se_cmd now.
 			 */
 			if (CMD_TFO(cmd)->check_stop_free != NULL) {
@@ -2029,7 +2029,7 @@ int transport_generic_handle_data(
 	 * If the received CDB has aleady been ABORTED by the generic
 	 * target engine, we now call transport_check_aborted_status()
 	 * to queue any delated TASK_ABORTED status for the received CDB to the
-	 * fabric module as we are expecting no futher incoming DATA OUT
+	 * fabric module as we are expecting no further incoming DATA OUT
 	 * sequences at this point.
 	 */
 	if (transport_check_aborted_status(cmd, 1) != 0)
@@ -2501,7 +2501,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd)
 	if (SE_DEV(cmd)->dev_task_attr_type != SAM_TASK_ATTR_EMULATED)
 		return 1;
 	/*
-	 * Check for the existance of HEAD_OF_QUEUE, and if true return 1
+	 * Check for the existence of HEAD_OF_QUEUE, and if true return 1
 	 * to allow the passed struct se_cmd list of tasks to the front of the list.
 	 */
 	 if (cmd->sam_task_attr == TASK_ATTR_HOQ) {
@@ -2547,7 +2547,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd)
 	if (atomic_read(&SE_DEV(cmd)->dev_ordered_sync) != 0) {
 		/*
 		 * Otherwise, add cmd w/ tasks to delayed cmd queue that
-		 * will be drained upon competion of HEAD_OF_QUEUE task.
+		 * will be drained upon completion of HEAD_OF_QUEUE task.
 		 */
 		spin_lock(&SE_DEV(cmd)->delayed_cmd_lock);
 		cmd->se_cmd_flags |= SCF_DELAYED_CMD_FROM_SAM_ATTR;
@@ -2589,7 +2589,7 @@ static int transport_execute_tasks(struct se_cmd *cmd)
 	}
 	/*
 	 * Call transport_cmd_check_stop() to see if a fabric exception
-	 * has occured that prevents execution.
+	 * has occurred that prevents execution.
 	 */
 	if (!(transport_cmd_check_stop(cmd, 0, TRANSPORT_PROCESSING))) {
 		/*
@@ -3109,7 +3109,7 @@ static int transport_generic_cmd_sequencer(
 	if (ret != 0) {
 		cmd->transport_wait_for_tasks = &transport_nop_wait_for_tasks;
 		/*
-		 * Set SCSI additional sense code (ASC) to 'LUN Not Accessable';
+		 * Set SCSI additional sense code (ASC) to 'LUN Not Accessible';
 		 * The ALUA additional sense code qualifier (ASCQ) is determined
 		 * by the ALUA primary or secondary access state..
 		 */
@@ -3867,7 +3867,7 @@ static void transport_generic_complete_ok(struct se_cmd *cmd)
 		}
 	}
 	/*
-	 * Check for a callback, used by amoungst other things
+	 * Check for a callback, used by amongst other things
 	 * XDWRITE_READ_10 emulation.
 	 */
 	if (cmd->transport_complete_callback)
diff --git a/drivers/target/target_core_ua.c b/drivers/target/target_core_ua.c
index a2ef346087e..df355176a37 100644
--- a/drivers/target/target_core_ua.c
+++ b/drivers/target/target_core_ua.c
@@ -247,7 +247,7 @@ void core_scsi3_ua_for_check_condition(
 		}
 		/*
 		 * Otherwise for the default 00b, release the UNIT ATTENTION
-		 * condition.  Return the ASC/ASCQ of the higest priority UA
+		 * condition.  Return the ASC/ASCQ of the highest priority UA
 		 * (head of the list) in the outgoing CHECK_CONDITION + sense.
 		 */
 		if (head) {
@@ -304,7 +304,7 @@ int core_scsi3_ua_clear_for_request_sense(
 	 * matching struct se_lun.
 	 *
 	 * Once the returning ASC/ASCQ values are set, we go ahead and
-	 * release all of the Unit Attention conditions for the assoicated
+	 * release all of the Unit Attention conditions for the associated
 	 * struct se_lun.
 	 */
 	spin_lock(&deve->ua_lock);
diff --git a/drivers/target/tcm_fc/Kconfig b/drivers/target/tcm_fc/Kconfig
new file mode 100644
index 00000000000..40caf458e89
--- /dev/null
+++ b/drivers/target/tcm_fc/Kconfig
@@ -0,0 +1,5 @@
+config TCM_FC
+	tristate "TCM_FC fabric Plugin"
+	depends on LIBFC
+	help
+	Say Y here to enable the TCM FC plugin for accessing FC fabrics in TCM
diff --git a/drivers/target/tcm_fc/Makefile b/drivers/target/tcm_fc/Makefile
new file mode 100644
index 00000000000..7a5c2b64cf6
--- /dev/null
+++ b/drivers/target/tcm_fc/Makefile
@@ -0,0 +1,15 @@
+EXTRA_CFLAGS += -I$(srctree)/drivers/target/ \
+		-I$(srctree)/drivers/scsi/ \
+		-I$(srctree)/include/scsi/ \
+		-I$(srctree)/drivers/target/tcm_fc/
+
+tcm_fc-y +=	tfc_cmd.o \
+		tfc_conf.o \
+		tfc_io.o \
+		tfc_sess.o
+
+obj-$(CONFIG_TCM_FC)	+= tcm_fc.o
+
+ifdef CONFIGFS_TCM_FC_DEBUG
+EXTRA_CFLAGS	+= -DTCM_FC_DEBUG
+endif
diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h
new file mode 100644
index 00000000000..defff32b788
--- /dev/null
+++ b/drivers/target/tcm_fc/tcm_fc.h
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __TCM_FC_H__
+#define __TCM_FC_H__
+
+#define FT_VERSION "0.3"
+
+#define FT_NAMELEN 32		/* length of ASCII WWPNs including pad */
+#define FT_TPG_NAMELEN 32	/* max length of TPG name */
+#define FT_LUN_NAMELEN 32	/* max length of LUN name */
+
+/*
+ * Debug options.
+ */
+#define FT_DEBUG_CONF	0x01	/* configuration messages */
+#define	FT_DEBUG_SESS	0x02	/* session messages */
+#define	FT_DEBUG_TM	0x04	/* TM operations */
+#define	FT_DEBUG_IO	0x08	/* I/O commands */
+#define	FT_DEBUG_DATA	0x10	/* Data transfer */
+
+extern unsigned int ft_debug_logging;	/* debug options */
+
+#define FT_DEBUG(mask, fmt, args...)					\
+	do {								\
+		if (ft_debug_logging & (mask))				\
+			printk(KERN_INFO "tcm_fc: %s: " fmt,		\
+				__func__, ##args);			\
+	} while (0)
+
+#define	FT_CONF_DBG(fmt, args...)	FT_DEBUG(FT_DEBUG_CONF, fmt, ##args)
+#define	FT_SESS_DBG(fmt, args...)	FT_DEBUG(FT_DEBUG_SESS, fmt, ##args)
+#define	FT_TM_DBG(fmt, args...)		FT_DEBUG(FT_DEBUG_TM, fmt, ##args)
+#define	FT_IO_DBG(fmt, args...)		FT_DEBUG(FT_DEBUG_IO, fmt, ##args)
+#define	FT_DATA_DBG(fmt, args...)	FT_DEBUG(FT_DEBUG_DATA, fmt, ##args)
+
+struct ft_transport_id {
+	__u8	format;
+	__u8	__resvd1[7];
+	__u8	wwpn[8];
+	__u8	__resvd2[8];
+} __attribute__((__packed__));
+
+/*
+ * Session (remote port).
+ */
+struct ft_sess {
+	u32 port_id;			/* for hash lookup use only */
+	u32 params;
+	u16 max_frame;			/* maximum frame size */
+	u64 port_name;			/* port name for transport ID */
+	struct ft_tport *tport;
+	struct se_session *se_sess;
+	struct hlist_node hash;		/* linkage in ft_sess_hash table */
+	struct rcu_head rcu;
+	struct kref kref;		/* ref for hash and outstanding I/Os */
+};
+
+/*
+ * Hash table of sessions per local port.
+ * Hash lookup by remote port FC_ID.
+ */
+#define	FT_SESS_HASH_BITS	6
+#define	FT_SESS_HASH_SIZE	(1 << FT_SESS_HASH_BITS)
+
+/*
+ * Per local port data.
+ * This is created only after a TPG exists that allows target function
+ * for the local port.  If the TPG exists, this is allocated when
+ * we're notified that the local port has been created, or when
+ * the first PRLI provider callback is received.
+ */
+struct ft_tport {
+	struct fc_lport *lport;
+	struct ft_tpg *tpg;		/* NULL if TPG deleted before tport */
+	u32	sess_count;		/* number of sessions in hash */
+	struct rcu_head rcu;
+	struct hlist_head hash[FT_SESS_HASH_SIZE];	/* list of sessions */
+};
+
+/*
+ * Node ID and authentication.
+ */
+struct ft_node_auth {
+	u64	port_name;
+	u64	node_name;
+};
+
+/*
+ * Node ACL for FC remote port session.
+ */
+struct ft_node_acl {
+	struct ft_node_auth node_auth;
+	struct se_node_acl se_node_acl;
+};
+
+struct ft_lun {
+	u32 index;
+	char name[FT_LUN_NAMELEN];
+};
+
+/*
+ * Target portal group (local port).
+ */
+struct ft_tpg {
+	u32 index;
+	struct ft_lport_acl *lport_acl;
+	struct ft_tport *tport;		/* active tport or NULL */
+	struct list_head list;		/* linkage in ft_lport_acl tpg_list */
+	struct list_head lun_list;	/* head of LUNs */
+	struct se_portal_group se_tpg;
+	struct task_struct *thread;	/* processing thread */
+	struct se_queue_obj qobj;	/* queue for processing thread */
+};
+
+struct ft_lport_acl {
+	u64 wwpn;
+	char name[FT_NAMELEN];
+	struct list_head list;
+	struct list_head tpg_list;
+	struct se_wwn fc_lport_wwn;
+};
+
+enum ft_cmd_state {
+	FC_CMD_ST_NEW = 0,
+	FC_CMD_ST_REJ
+};
+
+/*
+ * Commands
+ */
+struct ft_cmd {
+	enum ft_cmd_state state;
+	u16 lun;			/* LUN from request */
+	struct ft_sess *sess;		/* session held for cmd */
+	struct fc_seq *seq;		/* sequence in exchange mgr */
+	struct se_cmd se_cmd;		/* Local TCM I/O descriptor */
+	struct fc_frame *req_frame;
+	unsigned char *cdb;		/* pointer to CDB inside frame */
+	u32 write_data_len;		/* data received on writes */
+	struct se_queue_req se_req;
+	/* Local sense buffer */
+	unsigned char ft_sense_buffer[TRANSPORT_SENSE_BUFFER];
+	u32 was_ddp_setup:1;		/* Set only if ddp is setup */
+	struct scatterlist *sg;		/* Set only if DDP is setup */
+	u32 sg_cnt;			/* No. of item in scatterlist */
+};
+
+extern struct list_head ft_lport_list;
+extern struct mutex ft_lport_lock;
+extern struct fc4_prov ft_prov;
+extern struct target_fabric_configfs *ft_configfs;
+
+/*
+ * Fabric methods.
+ */
+
+/*
+ * Session ops.
+ */
+void ft_sess_put(struct ft_sess *);
+int ft_sess_shutdown(struct se_session *);
+void ft_sess_close(struct se_session *);
+void ft_sess_stop(struct se_session *, int, int);
+int ft_sess_logged_in(struct se_session *);
+u32 ft_sess_get_index(struct se_session *);
+u32 ft_sess_get_port_name(struct se_session *, unsigned char *, u32);
+void ft_sess_set_erl0(struct se_session *);
+
+void ft_lport_add(struct fc_lport *, void *);
+void ft_lport_del(struct fc_lport *, void *);
+int ft_lport_notify(struct notifier_block *, unsigned long, void *);
+
+/*
+ * IO methods.
+ */
+void ft_check_stop_free(struct se_cmd *);
+void ft_release_cmd(struct se_cmd *);
+int ft_queue_status(struct se_cmd *);
+int ft_queue_data_in(struct se_cmd *);
+int ft_write_pending(struct se_cmd *);
+int ft_write_pending_status(struct se_cmd *);
+u32 ft_get_task_tag(struct se_cmd *);
+int ft_get_cmd_state(struct se_cmd *);
+void ft_new_cmd_failure(struct se_cmd *);
+int ft_queue_tm_resp(struct se_cmd *);
+int ft_is_state_remove(struct se_cmd *);
+
+/*
+ * other internal functions.
+ */
+int ft_thread(void *);
+void ft_recv_req(struct ft_sess *, struct fc_frame *);
+struct ft_tpg *ft_lport_find_tpg(struct fc_lport *);
+struct ft_node_acl *ft_acl_get(struct ft_tpg *, struct fc_rport_priv *);
+
+void ft_recv_write_data(struct ft_cmd *, struct fc_frame *);
+void ft_dump_cmd(struct ft_cmd *, const char *caller);
+
+ssize_t ft_format_wwn(char *, size_t, u64);
+
+#endif /* __TCM_FC_H__ */
diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c
new file mode 100644
index 00000000000..49e51778f73
--- /dev/null
+++ b/drivers/target/tcm_fc/tfc_cmd.c
@@ -0,0 +1,696 @@
+/*
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* XXX TBD some includes may be extraneous */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <generated/utsrelease.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <linux/hash.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_encode.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_configfs.h>
+#include <target/target_core_base.h>
+#include <target/target_core_tmr.h>
+#include <target/configfs_macros.h>
+
+#include "tcm_fc.h"
+
+/*
+ * Dump cmd state for debugging.
+ */
+void ft_dump_cmd(struct ft_cmd *cmd, const char *caller)
+{
+	struct fc_exch *ep;
+	struct fc_seq *sp;
+	struct se_cmd *se_cmd;
+	struct se_mem *mem;
+	struct se_transport_task *task;
+
+	if (!(ft_debug_logging & FT_DEBUG_IO))
+		return;
+
+	se_cmd = &cmd->se_cmd;
+	printk(KERN_INFO "%s: cmd %p state %d sess %p seq %p se_cmd %p\n",
+		caller, cmd, cmd->state, cmd->sess, cmd->seq, se_cmd);
+	printk(KERN_INFO "%s: cmd %p cdb %p\n",
+		caller, cmd, cmd->cdb);
+	printk(KERN_INFO "%s: cmd %p lun %d\n", caller, cmd, cmd->lun);
+
+	task = T_TASK(se_cmd);
+	printk(KERN_INFO "%s: cmd %p task %p se_num %u buf %p len %u se_cmd_flags <0x%x>\n",
+	       caller, cmd, task, task->t_tasks_se_num,
+	       task->t_task_buf, se_cmd->data_length, se_cmd->se_cmd_flags);
+	if (task->t_mem_list)
+		list_for_each_entry(mem, task->t_mem_list, se_list)
+			printk(KERN_INFO "%s: cmd %p mem %p page %p "
+			       "len 0x%x off 0x%x\n",
+			       caller, cmd, mem,
+			       mem->se_page, mem->se_len, mem->se_off);
+	sp = cmd->seq;
+	if (sp) {
+		ep = fc_seq_exch(sp);
+		printk(KERN_INFO "%s: cmd %p sid %x did %x "
+			"ox_id %x rx_id %x seq_id %x e_stat %x\n",
+			caller, cmd, ep->sid, ep->did, ep->oxid, ep->rxid,
+			sp->id, ep->esb_stat);
+	}
+	print_hex_dump(KERN_INFO, "ft_dump_cmd ", DUMP_PREFIX_NONE,
+		16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0);
+}
+
+/*
+ * Get LUN from CDB.
+ */
+static int ft_get_lun_for_cmd(struct ft_cmd *cmd, u8 *lunp)
+{
+	u64 lun;
+
+	lun = lunp[1];
+	switch (lunp[0] >> 6) {
+	case 0:
+		break;
+	case 1:
+		lun |= (lunp[0] & 0x3f) << 8;
+		break;
+	default:
+		return -1;
+	}
+	if (lun >= TRANSPORT_MAX_LUNS_PER_TPG)
+		return -1;
+	cmd->lun = lun;
+	return transport_get_lun_for_cmd(&cmd->se_cmd, NULL, lun);
+}
+
+static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd)
+{
+	struct se_queue_obj *qobj;
+	unsigned long flags;
+
+	qobj = &sess->tport->tpg->qobj;
+	spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
+	list_add_tail(&cmd->se_req.qr_list, &qobj->qobj_list);
+	spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
+	atomic_inc(&qobj->queue_cnt);
+	wake_up_interruptible(&qobj->thread_wq);
+}
+
+static struct ft_cmd *ft_dequeue_cmd(struct se_queue_obj *qobj)
+{
+	unsigned long flags;
+	struct se_queue_req *qr;
+
+	spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
+	if (list_empty(&qobj->qobj_list)) {
+		spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
+		return NULL;
+	}
+	qr = list_first_entry(&qobj->qobj_list, struct se_queue_req, qr_list);
+	list_del(&qr->qr_list);
+	atomic_dec(&qobj->queue_cnt);
+	spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
+	return container_of(qr, struct ft_cmd, se_req);
+}
+
+static void ft_free_cmd(struct ft_cmd *cmd)
+{
+	struct fc_frame *fp;
+	struct fc_lport *lport;
+
+	if (!cmd)
+		return;
+	fp = cmd->req_frame;
+	lport = fr_dev(fp);
+	if (fr_seq(fp))
+		lport->tt.seq_release(fr_seq(fp));
+	fc_frame_free(fp);
+	ft_sess_put(cmd->sess);	/* undo get from lookup at recv */
+	kfree(cmd);
+}
+
+void ft_release_cmd(struct se_cmd *se_cmd)
+{
+	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+
+	ft_free_cmd(cmd);
+}
+
+void ft_check_stop_free(struct se_cmd *se_cmd)
+{
+	transport_generic_free_cmd(se_cmd, 0, 1, 0);
+}
+
+/*
+ * Send response.
+ */
+int ft_queue_status(struct se_cmd *se_cmd)
+{
+	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+	struct fc_frame *fp;
+	struct fcp_resp_with_ext *fcp;
+	struct fc_lport *lport;
+	struct fc_exch *ep;
+	size_t len;
+
+	ft_dump_cmd(cmd, __func__);
+	ep = fc_seq_exch(cmd->seq);
+	lport = ep->lp;
+	len = sizeof(*fcp) + se_cmd->scsi_sense_length;
+	fp = fc_frame_alloc(lport, len);
+	if (!fp) {
+		/* XXX shouldn't just drop it - requeue and retry? */
+		return 0;
+	}
+	fcp = fc_frame_payload_get(fp, len);
+	memset(fcp, 0, len);
+	fcp->resp.fr_status = se_cmd->scsi_status;
+
+	len = se_cmd->scsi_sense_length;
+	if (len) {
+		fcp->resp.fr_flags |= FCP_SNS_LEN_VAL;
+		fcp->ext.fr_sns_len = htonl(len);
+		memcpy((fcp + 1), se_cmd->sense_buffer, len);
+	}
+
+	/*
+	 * Test underflow and overflow with one mask.  Usually both are off.
+	 * Bidirectional commands are not handled yet.
+	 */
+	if (se_cmd->se_cmd_flags & (SCF_OVERFLOW_BIT | SCF_UNDERFLOW_BIT)) {
+		if (se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT)
+			fcp->resp.fr_flags |= FCP_RESID_OVER;
+		else
+			fcp->resp.fr_flags |= FCP_RESID_UNDER;
+		fcp->ext.fr_resid = cpu_to_be32(se_cmd->residual_count);
+	}
+
+	/*
+	 * Send response.
+	 */
+	cmd->seq = lport->tt.seq_start_next(cmd->seq);
+	fc_fill_fc_hdr(fp, FC_RCTL_DD_CMD_STATUS, ep->did, ep->sid, FC_TYPE_FCP,
+		       FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ, 0);
+
+	lport->tt.seq_send(lport, cmd->seq, fp);
+	lport->tt.exch_done(cmd->seq);
+	return 0;
+}
+
+int ft_write_pending_status(struct se_cmd *se_cmd)
+{
+	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+
+	return cmd->write_data_len != se_cmd->data_length;
+}
+
+/*
+ * Send TX_RDY (transfer ready).
+ */
+int ft_write_pending(struct se_cmd *se_cmd)
+{
+	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+	struct fc_frame *fp;
+	struct fcp_txrdy *txrdy;
+	struct fc_lport *lport;
+	struct fc_exch *ep;
+	struct fc_frame_header *fh;
+	u32 f_ctl;
+
+	ft_dump_cmd(cmd, __func__);
+
+	ep = fc_seq_exch(cmd->seq);
+	lport = ep->lp;
+	fp = fc_frame_alloc(lport, sizeof(*txrdy));
+	if (!fp)
+		return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES;
+
+	txrdy = fc_frame_payload_get(fp, sizeof(*txrdy));
+	memset(txrdy, 0, sizeof(*txrdy));
+	txrdy->ft_burst_len = htonl(se_cmd->data_length);
+
+	cmd->seq = lport->tt.seq_start_next(cmd->seq);
+	fc_fill_fc_hdr(fp, FC_RCTL_DD_DATA_DESC, ep->did, ep->sid, FC_TYPE_FCP,
+		       FC_FC_EX_CTX | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
+
+	fh = fc_frame_header_get(fp);
+	f_ctl = ntoh24(fh->fh_f_ctl);
+
+	/* Only if it is 'Exchange Responder' */
+	if (f_ctl & FC_FC_EX_CTX) {
+		/* Target is 'exchange responder' and sending XFER_READY
+		 * to 'exchange initiator (initiator)'
+		 */
+		if ((ep->xid <= lport->lro_xid) &&
+		    (fh->fh_r_ctl == FC_RCTL_DD_DATA_DESC)) {
+			if (se_cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) {
+				/*
+				 * Map se_mem list to scatterlist, so that
+				 * DDP can be setup. DDP setup function require
+				 * scatterlist. se_mem_list is internal to
+				 * TCM/LIO target
+				 */
+				transport_do_task_sg_chain(se_cmd);
+				cmd->sg = T_TASK(se_cmd)->t_tasks_sg_chained;
+				cmd->sg_cnt =
+					T_TASK(se_cmd)->t_tasks_sg_chained_no;
+			}
+			if (cmd->sg && lport->tt.ddp_setup(lport, ep->xid,
+						    cmd->sg, cmd->sg_cnt))
+				cmd->was_ddp_setup = 1;
+		}
+	}
+	lport->tt.seq_send(lport, cmd->seq, fp);
+	return 0;
+}
+
+u32 ft_get_task_tag(struct se_cmd *se_cmd)
+{
+	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+
+	return fc_seq_exch(cmd->seq)->rxid;
+}
+
+int ft_get_cmd_state(struct se_cmd *se_cmd)
+{
+	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+
+	return cmd->state;
+}
+
+int ft_is_state_remove(struct se_cmd *se_cmd)
+{
+	return 0;	/* XXX TBD */
+}
+
+void ft_new_cmd_failure(struct se_cmd *se_cmd)
+{
+	/* XXX TBD */
+	printk(KERN_INFO "%s: se_cmd %p\n", __func__, se_cmd);
+}
+
+/*
+ * FC sequence response handler for follow-on sequences (data) and aborts.
+ */
+static void ft_recv_seq(struct fc_seq *sp, struct fc_frame *fp, void *arg)
+{
+	struct ft_cmd *cmd = arg;
+	struct fc_frame_header *fh;
+
+	if (IS_ERR(fp)) {
+		/* XXX need to find cmd if queued */
+		cmd->se_cmd.t_state = TRANSPORT_REMOVE;
+		cmd->seq = NULL;
+		transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0);
+		return;
+	}
+
+	fh = fc_frame_header_get(fp);
+
+	switch (fh->fh_r_ctl) {
+	case FC_RCTL_DD_SOL_DATA:	/* write data */
+		ft_recv_write_data(cmd, fp);
+		break;
+	case FC_RCTL_DD_UNSOL_CTL:	/* command */
+	case FC_RCTL_DD_SOL_CTL:	/* transfer ready */
+	case FC_RCTL_DD_DATA_DESC:	/* transfer ready */
+	default:
+		printk(KERN_INFO "%s: unhandled frame r_ctl %x\n",
+		       __func__, fh->fh_r_ctl);
+		fc_frame_free(fp);
+		transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0);
+		break;
+	}
+}
+
+/*
+ * Send a FCP response including SCSI status and optional FCP rsp_code.
+ * status is SAM_STAT_GOOD (zero) iff code is valid.
+ * This is used in error cases, such as allocation failures.
+ */
+static void ft_send_resp_status(struct fc_lport *lport,
+				const struct fc_frame *rx_fp,
+				u32 status, enum fcp_resp_rsp_codes code)
+{
+	struct fc_frame *fp;
+	struct fc_seq *sp;
+	const struct fc_frame_header *fh;
+	size_t len;
+	struct fcp_resp_with_ext *fcp;
+	struct fcp_resp_rsp_info *info;
+
+	fh = fc_frame_header_get(rx_fp);
+	FT_IO_DBG("FCP error response: did %x oxid %x status %x code %x\n",
+		  ntoh24(fh->fh_s_id), ntohs(fh->fh_ox_id), status, code);
+	len = sizeof(*fcp);
+	if (status == SAM_STAT_GOOD)
+		len += sizeof(*info);
+	fp = fc_frame_alloc(lport, len);
+	if (!fp)
+		return;
+	fcp = fc_frame_payload_get(fp, len);
+	memset(fcp, 0, len);
+	fcp->resp.fr_status = status;
+	if (status == SAM_STAT_GOOD) {
+		fcp->ext.fr_rsp_len = htonl(sizeof(*info));
+		fcp->resp.fr_flags |= FCP_RSP_LEN_VAL;
+		info = (struct fcp_resp_rsp_info *)(fcp + 1);
+		info->rsp_code = code;
+	}
+
+	fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_DD_CMD_STATUS, 0);
+	sp = fr_seq(fp);
+	if (sp)
+		lport->tt.seq_send(lport, sp, fp);
+	else
+		lport->tt.frame_send(lport, fp);
+}
+
+/*
+ * Send error or task management response.
+ * Always frees the cmd and associated state.
+ */
+static void ft_send_resp_code(struct ft_cmd *cmd, enum fcp_resp_rsp_codes code)
+{
+	ft_send_resp_status(cmd->sess->tport->lport,
+			    cmd->req_frame, SAM_STAT_GOOD, code);
+	ft_free_cmd(cmd);
+}
+
+/*
+ * Handle Task Management Request.
+ */
+static void ft_send_tm(struct ft_cmd *cmd)
+{
+	struct se_tmr_req *tmr;
+	struct fcp_cmnd *fcp;
+	u8 tm_func;
+
+	fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp));
+
+	switch (fcp->fc_tm_flags) {
+	case FCP_TMF_LUN_RESET:
+		tm_func = TMR_LUN_RESET;
+		if (ft_get_lun_for_cmd(cmd, fcp->fc_lun) < 0) {
+			ft_dump_cmd(cmd, __func__);
+			transport_send_check_condition_and_sense(&cmd->se_cmd,
+				cmd->se_cmd.scsi_sense_reason, 0);
+			ft_sess_put(cmd->sess);
+			return;
+		}
+		break;
+	case FCP_TMF_TGT_RESET:
+		tm_func = TMR_TARGET_WARM_RESET;
+		break;
+	case FCP_TMF_CLR_TASK_SET:
+		tm_func = TMR_CLEAR_TASK_SET;
+		break;
+	case FCP_TMF_ABT_TASK_SET:
+		tm_func = TMR_ABORT_TASK_SET;
+		break;
+	case FCP_TMF_CLR_ACA:
+		tm_func = TMR_CLEAR_ACA;
+		break;
+	default:
+		/*
+		 * FCP4r01 indicates having a combination of
+		 * tm_flags set is invalid.
+		 */
+		FT_TM_DBG("invalid FCP tm_flags %x\n", fcp->fc_tm_flags);
+		ft_send_resp_code(cmd, FCP_CMND_FIELDS_INVALID);
+		return;
+	}
+
+	FT_TM_DBG("alloc tm cmd fn %d\n", tm_func);
+	tmr = core_tmr_alloc_req(&cmd->se_cmd, cmd, tm_func);
+	if (!tmr) {
+		FT_TM_DBG("alloc failed\n");
+		ft_send_resp_code(cmd, FCP_TMF_FAILED);
+		return;
+	}
+	cmd->se_cmd.se_tmr_req = tmr;
+	transport_generic_handle_tmr(&cmd->se_cmd);
+}
+
+/*
+ * Send status from completed task management request.
+ */
+int ft_queue_tm_resp(struct se_cmd *se_cmd)
+{
+	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+	struct se_tmr_req *tmr = se_cmd->se_tmr_req;
+	enum fcp_resp_rsp_codes code;
+
+	switch (tmr->response) {
+	case TMR_FUNCTION_COMPLETE:
+		code = FCP_TMF_CMPL;
+		break;
+	case TMR_LUN_DOES_NOT_EXIST:
+		code = FCP_TMF_INVALID_LUN;
+		break;
+	case TMR_FUNCTION_REJECTED:
+		code = FCP_TMF_REJECTED;
+		break;
+	case TMR_TASK_DOES_NOT_EXIST:
+	case TMR_TASK_STILL_ALLEGIANT:
+	case TMR_TASK_FAILOVER_NOT_SUPPORTED:
+	case TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED:
+	case TMR_FUNCTION_AUTHORIZATION_FAILED:
+	default:
+		code = FCP_TMF_FAILED;
+		break;
+	}
+	FT_TM_DBG("tmr fn %d resp %d fcp code %d\n",
+		  tmr->function, tmr->response, code);
+	ft_send_resp_code(cmd, code);
+	return 0;
+}
+
+/*
+ * Handle incoming FCP command.
+ */
+static void ft_recv_cmd(struct ft_sess *sess, struct fc_frame *fp)
+{
+	struct ft_cmd *cmd;
+	struct fc_lport *lport = sess->tport->lport;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+	if (!cmd)
+		goto busy;
+	cmd->sess = sess;
+	cmd->seq = lport->tt.seq_assign(lport, fp);
+	if (!cmd->seq) {
+		kfree(cmd);
+		goto busy;
+	}
+	cmd->req_frame = fp;		/* hold frame during cmd */
+	ft_queue_cmd(sess, cmd);
+	return;
+
+busy:
+	FT_IO_DBG("cmd or seq allocation failure - sending BUSY\n");
+	ft_send_resp_status(lport, fp, SAM_STAT_BUSY, 0);
+	fc_frame_free(fp);
+	ft_sess_put(sess);		/* undo get from lookup */
+}
+
+
+/*
+ * Handle incoming FCP frame.
+ * Caller has verified that the frame is type FCP.
+ */
+void ft_recv_req(struct ft_sess *sess, struct fc_frame *fp)
+{
+	struct fc_frame_header *fh = fc_frame_header_get(fp);
+
+	switch (fh->fh_r_ctl) {
+	case FC_RCTL_DD_UNSOL_CMD:	/* command */
+		ft_recv_cmd(sess, fp);
+		break;
+	case FC_RCTL_DD_SOL_DATA:	/* write data */
+	case FC_RCTL_DD_UNSOL_CTL:
+	case FC_RCTL_DD_SOL_CTL:
+	case FC_RCTL_DD_DATA_DESC:	/* transfer ready */
+	case FC_RCTL_ELS4_REQ:		/* SRR, perhaps */
+	default:
+		printk(KERN_INFO "%s: unhandled frame r_ctl %x\n",
+		       __func__, fh->fh_r_ctl);
+		fc_frame_free(fp);
+		ft_sess_put(sess);	/* undo get from lookup */
+		break;
+	}
+}
+
+/*
+ * Send new command to target.
+ */
+static void ft_send_cmd(struct ft_cmd *cmd)
+{
+	struct fc_frame_header *fh = fc_frame_header_get(cmd->req_frame);
+	struct se_cmd *se_cmd;
+	struct fcp_cmnd *fcp;
+	int data_dir;
+	u32 data_len;
+	int task_attr;
+	int ret;
+
+	fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp));
+	if (!fcp)
+		goto err;
+
+	if (fcp->fc_flags & FCP_CFL_LEN_MASK)
+		goto err;		/* not handling longer CDBs yet */
+
+	if (fcp->fc_tm_flags) {
+		task_attr = FCP_PTA_SIMPLE;
+		data_dir = DMA_NONE;
+		data_len = 0;
+	} else {
+		switch (fcp->fc_flags & (FCP_CFL_RDDATA | FCP_CFL_WRDATA)) {
+		case 0:
+			data_dir = DMA_NONE;
+			break;
+		case FCP_CFL_RDDATA:
+			data_dir = DMA_FROM_DEVICE;
+			break;
+		case FCP_CFL_WRDATA:
+			data_dir = DMA_TO_DEVICE;
+			break;
+		case FCP_CFL_WRDATA | FCP_CFL_RDDATA:
+			goto err;	/* TBD not supported by tcm_fc yet */
+		}
+
+		/* FCP_PTA_ maps 1:1 to TASK_ATTR_ */
+		task_attr = fcp->fc_pri_ta & FCP_PTA_MASK;
+		data_len = ntohl(fcp->fc_dl);
+		cmd->cdb = fcp->fc_cdb;
+	}
+
+	se_cmd = &cmd->se_cmd;
+	/*
+	 * Initialize struct se_cmd descriptor from target_core_mod
+	 * infrastructure
+	 */
+	transport_init_se_cmd(se_cmd, &ft_configfs->tf_ops, cmd->sess->se_sess,
+			      data_len, data_dir, task_attr,
+			      &cmd->ft_sense_buffer[0]);
+	/*
+	 * Check for FCP task management flags
+	 */
+	if (fcp->fc_tm_flags) {
+		ft_send_tm(cmd);
+		return;
+	}
+
+	fc_seq_exch(cmd->seq)->lp->tt.seq_set_resp(cmd->seq, ft_recv_seq, cmd);
+
+	ret = ft_get_lun_for_cmd(cmd, fcp->fc_lun);
+	if (ret < 0) {
+		ft_dump_cmd(cmd, __func__);
+		transport_send_check_condition_and_sense(&cmd->se_cmd,
+			cmd->se_cmd.scsi_sense_reason, 0);
+		return;
+	}
+
+	ret = transport_generic_allocate_tasks(se_cmd, cmd->cdb);
+
+	FT_IO_DBG("r_ctl %x alloc task ret %d\n", fh->fh_r_ctl, ret);
+	ft_dump_cmd(cmd, __func__);
+
+	if (ret == -1) {
+		transport_send_check_condition_and_sense(se_cmd,
+				TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, 0);
+		transport_generic_free_cmd(se_cmd, 0, 1, 0);
+		return;
+	}
+	if (ret == -2) {
+		if (se_cmd->se_cmd_flags & SCF_SCSI_RESERVATION_CONFLICT)
+			ft_queue_status(se_cmd);
+		else
+			transport_send_check_condition_and_sense(se_cmd,
+					se_cmd->scsi_sense_reason, 0);
+		transport_generic_free_cmd(se_cmd, 0, 1, 0);
+		return;
+	}
+	transport_generic_handle_cdb(se_cmd);
+	return;
+
+err:
+	ft_send_resp_code(cmd, FCP_CMND_FIELDS_INVALID);
+	return;
+}
+
+/*
+ * Handle request in the command thread.
+ */
+static void ft_exec_req(struct ft_cmd *cmd)
+{
+	FT_IO_DBG("cmd state %x\n", cmd->state);
+	switch (cmd->state) {
+	case FC_CMD_ST_NEW:
+		ft_send_cmd(cmd);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * Processing thread.
+ * Currently one thread per tpg.
+ */
+int ft_thread(void *arg)
+{
+	struct ft_tpg *tpg = arg;
+	struct se_queue_obj *qobj = &tpg->qobj;
+	struct ft_cmd *cmd;
+	int ret;
+
+	set_user_nice(current, -20);
+
+	while (!kthread_should_stop()) {
+		ret = wait_event_interruptible(qobj->thread_wq,
+			atomic_read(&qobj->queue_cnt) || kthread_should_stop());
+		if (ret < 0 || kthread_should_stop())
+			goto out;
+		cmd = ft_dequeue_cmd(qobj);
+		if (cmd)
+			ft_exec_req(cmd);
+	}
+
+out:
+	return 0;
+}
diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c
new file mode 100644
index 00000000000..fcdbbffe88c
--- /dev/null
+++ b/drivers/target/tcm_fc/tfc_conf.c
@@ -0,0 +1,677 @@
+/*******************************************************************************
+ * Filename:  tcm_fc.c
+ *
+ * This file contains the configfs implementation for TCM_fc fabric node.
+ * Based on tcm_loop_configfs.c
+ *
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ * Copyright (c) 2009,2010 Rising Tide, Inc.
+ * Copyright (c) 2009,2010 Linux-iSCSI.org
+ *
+ * Copyright (c) 2009,2010 Nicholas A. Bellinger <nab@linux-iscsi.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ ****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <generated/utsrelease.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/libfc.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_fabric_configfs.h>
+#include <target/target_core_fabric_lib.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_configfs.h>
+#include <target/target_core_base.h>
+#include <target/configfs_macros.h>
+
+#include "tcm_fc.h"
+
+struct target_fabric_configfs *ft_configfs;
+
+LIST_HEAD(ft_lport_list);
+DEFINE_MUTEX(ft_lport_lock);
+
+unsigned int ft_debug_logging;
+module_param_named(debug_logging, ft_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
+
+/*
+ * Parse WWN.
+ * If strict, we require lower-case hex and colon separators to be sure
+ * the name is the same as what would be generated by ft_format_wwn()
+ * so the name and wwn are mapped one-to-one.
+ */
+static ssize_t ft_parse_wwn(const char *name, u64 *wwn, int strict)
+{
+	const char *cp;
+	char c;
+	u32 nibble;
+	u32 byte = 0;
+	u32 pos = 0;
+	u32 err;
+
+	*wwn = 0;
+	for (cp = name; cp < &name[FT_NAMELEN - 1]; cp++) {
+		c = *cp;
+		if (c == '\n' && cp[1] == '\0')
+			continue;
+		if (strict && pos++ == 2 && byte++ < 7) {
+			pos = 0;
+			if (c == ':')
+				continue;
+			err = 1;
+			goto fail;
+		}
+		if (c == '\0') {
+			err = 2;
+			if (strict && byte != 8)
+				goto fail;
+			return cp - name;
+		}
+		err = 3;
+		if (isdigit(c))
+			nibble = c - '0';
+		else if (isxdigit(c) && (islower(c) || !strict))
+			nibble = tolower(c) - 'a' + 10;
+		else
+			goto fail;
+		*wwn = (*wwn << 4) | nibble;
+	}
+	err = 4;
+fail:
+	FT_CONF_DBG("err %u len %zu pos %u byte %u\n",
+		    err, cp - name, pos, byte);
+	return -1;
+}
+
+ssize_t ft_format_wwn(char *buf, size_t len, u64 wwn)
+{
+	u8 b[8];
+
+	put_unaligned_be64(wwn, b);
+	return snprintf(buf, len,
+		 "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
+		 b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]);
+}
+
+static ssize_t ft_wwn_show(void *arg, char *buf)
+{
+	u64 *wwn = arg;
+	ssize_t len;
+
+	len = ft_format_wwn(buf, PAGE_SIZE - 2, *wwn);
+	buf[len++] = '\n';
+	return len;
+}
+
+static ssize_t ft_wwn_store(void *arg, const char *buf, size_t len)
+{
+	ssize_t ret;
+	u64 wwn;
+
+	ret = ft_parse_wwn(buf, &wwn, 0);
+	if (ret > 0)
+		*(u64 *)arg = wwn;
+	return ret;
+}
+
+/*
+ * ACL auth ops.
+ */
+
+static ssize_t ft_nacl_show_port_name(
+	struct se_node_acl *se_nacl,
+	char *page)
+{
+	struct ft_node_acl *acl = container_of(se_nacl,
+			struct ft_node_acl, se_node_acl);
+
+	return ft_wwn_show(&acl->node_auth.port_name, page);
+}
+
+static ssize_t ft_nacl_store_port_name(
+	struct se_node_acl *se_nacl,
+	const char *page,
+	size_t count)
+{
+	struct ft_node_acl *acl = container_of(se_nacl,
+			struct ft_node_acl, se_node_acl);
+
+	return ft_wwn_store(&acl->node_auth.port_name, page, count);
+}
+
+TF_NACL_BASE_ATTR(ft, port_name, S_IRUGO | S_IWUSR);
+
+static ssize_t ft_nacl_show_node_name(
+	struct se_node_acl *se_nacl,
+	char *page)
+{
+	struct ft_node_acl *acl = container_of(se_nacl,
+			struct ft_node_acl, se_node_acl);
+
+	return ft_wwn_show(&acl->node_auth.node_name, page);
+}
+
+static ssize_t ft_nacl_store_node_name(
+	struct se_node_acl *se_nacl,
+	const char *page,
+	size_t count)
+{
+	struct ft_node_acl *acl = container_of(se_nacl,
+			struct ft_node_acl, se_node_acl);
+
+	return ft_wwn_store(&acl->node_auth.node_name, page, count);
+}
+
+TF_NACL_BASE_ATTR(ft, node_name, S_IRUGO | S_IWUSR);
+
+static struct configfs_attribute *ft_nacl_base_attrs[] = {
+	&ft_nacl_port_name.attr,
+	&ft_nacl_node_name.attr,
+	NULL,
+};
+
+/*
+ * ACL ops.
+ */
+
+/*
+ * Add ACL for an initiator.  The ACL is named arbitrarily.
+ * The port_name and/or node_name are attributes.
+ */
+static struct se_node_acl *ft_add_acl(
+	struct se_portal_group *se_tpg,
+	struct config_group *group,
+	const char *name)
+{
+	struct ft_node_acl *acl;
+	struct ft_tpg *tpg;
+	u64 wwpn;
+	u32 q_depth;
+
+	FT_CONF_DBG("add acl %s\n", name);
+	tpg = container_of(se_tpg, struct ft_tpg, se_tpg);
+
+	if (ft_parse_wwn(name, &wwpn, 1) < 0)
+		return ERR_PTR(-EINVAL);
+
+	acl = kzalloc(sizeof(struct ft_node_acl), GFP_KERNEL);
+	if (!(acl))
+		return ERR_PTR(-ENOMEM);
+	acl->node_auth.port_name = wwpn;
+
+	q_depth = 32;		/* XXX bogus default - get from tpg? */
+	return core_tpg_add_initiator_node_acl(&tpg->se_tpg,
+				&acl->se_node_acl, name, q_depth);
+}
+
+static void ft_del_acl(struct se_node_acl *se_acl)
+{
+	struct se_portal_group *se_tpg = se_acl->se_tpg;
+	struct ft_tpg *tpg;
+	struct ft_node_acl *acl = container_of(se_acl,
+				struct ft_node_acl, se_node_acl);
+
+	FT_CONF_DBG("del acl %s\n",
+		config_item_name(&se_acl->acl_group.cg_item));
+
+	tpg = container_of(se_tpg, struct ft_tpg, se_tpg);
+	FT_CONF_DBG("del acl %p se_acl %p tpg %p se_tpg %p\n",
+		    acl, se_acl, tpg, &tpg->se_tpg);
+
+	core_tpg_del_initiator_node_acl(&tpg->se_tpg, se_acl, 1);
+	kfree(acl);
+}
+
+struct ft_node_acl *ft_acl_get(struct ft_tpg *tpg, struct fc_rport_priv *rdata)
+{
+	struct ft_node_acl *found = NULL;
+	struct ft_node_acl *acl;
+	struct se_portal_group *se_tpg = &tpg->se_tpg;
+	struct se_node_acl *se_acl;
+
+	spin_lock_bh(&se_tpg->acl_node_lock);
+	list_for_each_entry(se_acl, &se_tpg->acl_node_list, acl_list) {
+		acl = container_of(se_acl, struct ft_node_acl, se_node_acl);
+		FT_CONF_DBG("acl %p port_name %llx\n",
+			acl, (unsigned long long)acl->node_auth.port_name);
+		if (acl->node_auth.port_name == rdata->ids.port_name ||
+		    acl->node_auth.node_name == rdata->ids.node_name) {
+			FT_CONF_DBG("acl %p port_name %llx matched\n", acl,
+				    (unsigned long long)rdata->ids.port_name);
+			found = acl;
+			/* XXX need to hold onto ACL */
+			break;
+		}
+	}
+	spin_unlock_bh(&se_tpg->acl_node_lock);
+	return found;
+}
+
+struct se_node_acl *ft_tpg_alloc_fabric_acl(struct se_portal_group *se_tpg)
+{
+	struct ft_node_acl *acl;
+
+	acl = kzalloc(sizeof(*acl), GFP_KERNEL);
+	if (!(acl)) {
+		printk(KERN_ERR "Unable to allocate struct ft_node_acl\n");
+		return NULL;
+	}
+	FT_CONF_DBG("acl %p\n", acl);
+	return &acl->se_node_acl;
+}
+
+static void ft_tpg_release_fabric_acl(struct se_portal_group *se_tpg,
+				      struct se_node_acl *se_acl)
+{
+	struct ft_node_acl *acl = container_of(se_acl,
+				struct ft_node_acl, se_node_acl);
+
+	FT_CONF_DBG(KERN_INFO "acl %p\n", acl);
+	kfree(acl);
+}
+
+/*
+ * local_port port_group (tpg) ops.
+ */
+static struct se_portal_group *ft_add_tpg(
+	struct se_wwn *wwn,
+	struct config_group *group,
+	const char *name)
+{
+	struct ft_lport_acl *lacl;
+	struct ft_tpg *tpg;
+	unsigned long index;
+	int ret;
+
+	FT_CONF_DBG("tcm_fc: add tpg %s\n", name);
+
+	/*
+	 * Name must be "tpgt_" followed by the index.
+	 */
+	if (strstr(name, "tpgt_") != name)
+		return NULL;
+	if (strict_strtoul(name + 5, 10, &index) || index > UINT_MAX)
+		return NULL;
+
+	lacl = container_of(wwn, struct ft_lport_acl, fc_lport_wwn);
+	tpg = kzalloc(sizeof(*tpg), GFP_KERNEL);
+	if (!tpg)
+		return NULL;
+	tpg->index = index;
+	tpg->lport_acl = lacl;
+	INIT_LIST_HEAD(&tpg->lun_list);
+	transport_init_queue_obj(&tpg->qobj);
+
+	ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg,
+				(void *)tpg, TRANSPORT_TPG_TYPE_NORMAL);
+	if (ret < 0) {
+		kfree(tpg);
+		return NULL;
+	}
+
+	tpg->thread = kthread_run(ft_thread, tpg, "ft_tpg%lu", index);
+	if (IS_ERR(tpg->thread)) {
+		kfree(tpg);
+		return NULL;
+	}
+
+	mutex_lock(&ft_lport_lock);
+	list_add_tail(&tpg->list, &lacl->tpg_list);
+	mutex_unlock(&ft_lport_lock);
+
+	return &tpg->se_tpg;
+}
+
+static void ft_del_tpg(struct se_portal_group *se_tpg)
+{
+	struct ft_tpg *tpg = container_of(se_tpg, struct ft_tpg, se_tpg);
+
+	FT_CONF_DBG("del tpg %s\n",
+		    config_item_name(&tpg->se_tpg.tpg_group.cg_item));
+
+	kthread_stop(tpg->thread);
+
+	/* Wait for sessions to be freed thru RCU, for BUG_ON below */
+	synchronize_rcu();
+
+	mutex_lock(&ft_lport_lock);
+	list_del(&tpg->list);
+	if (tpg->tport) {
+		tpg->tport->tpg = NULL;
+		tpg->tport = NULL;
+	}
+	mutex_unlock(&ft_lport_lock);
+
+	core_tpg_deregister(se_tpg);
+	kfree(tpg);
+}
+
+/*
+ * Verify that an lport is configured to use the tcm_fc module, and return
+ * the target port group that should be used.
+ *
+ * The caller holds ft_lport_lock.
+ */
+struct ft_tpg *ft_lport_find_tpg(struct fc_lport *lport)
+{
+	struct ft_lport_acl *lacl;
+	struct ft_tpg *tpg;
+
+	list_for_each_entry(lacl, &ft_lport_list, list) {
+		if (lacl->wwpn == lport->wwpn) {
+			list_for_each_entry(tpg, &lacl->tpg_list, list)
+				return tpg; /* XXX for now return first entry */
+			return NULL;
+		}
+	}
+	return NULL;
+}
+
+/*
+ * target config instance ops.
+ */
+
+/*
+ * Add lport to allowed config.
+ * The name is the WWPN in lower-case ASCII, colon-separated bytes.
+ */
+static struct se_wwn *ft_add_lport(
+	struct target_fabric_configfs *tf,
+	struct config_group *group,
+	const char *name)
+{
+	struct ft_lport_acl *lacl;
+	struct ft_lport_acl *old_lacl;
+	u64 wwpn;
+
+	FT_CONF_DBG("add lport %s\n", name);
+	if (ft_parse_wwn(name, &wwpn, 1) < 0)
+		return NULL;
+	lacl = kzalloc(sizeof(*lacl), GFP_KERNEL);
+	if (!lacl)
+		return NULL;
+	lacl->wwpn = wwpn;
+	INIT_LIST_HEAD(&lacl->tpg_list);
+
+	mutex_lock(&ft_lport_lock);
+	list_for_each_entry(old_lacl, &ft_lport_list, list) {
+		if (old_lacl->wwpn == wwpn) {
+			mutex_unlock(&ft_lport_lock);
+			kfree(lacl);
+			return NULL;
+		}
+	}
+	list_add_tail(&lacl->list, &ft_lport_list);
+	ft_format_wwn(lacl->name, sizeof(lacl->name), wwpn);
+	mutex_unlock(&ft_lport_lock);
+
+	return &lacl->fc_lport_wwn;
+}
+
+static void ft_del_lport(struct se_wwn *wwn)
+{
+	struct ft_lport_acl *lacl = container_of(wwn,
+				struct ft_lport_acl, fc_lport_wwn);
+
+	FT_CONF_DBG("del lport %s\n",
+			config_item_name(&wwn->wwn_group.cg_item));
+	mutex_lock(&ft_lport_lock);
+	list_del(&lacl->list);
+	mutex_unlock(&ft_lport_lock);
+
+	kfree(lacl);
+}
+
+static ssize_t ft_wwn_show_attr_version(
+	struct target_fabric_configfs *tf,
+	char *page)
+{
+	return sprintf(page, "TCM FC " FT_VERSION " on %s/%s on "
+		""UTS_RELEASE"\n",  utsname()->sysname, utsname()->machine);
+}
+
+TF_WWN_ATTR_RO(ft, version);
+
+static struct configfs_attribute *ft_wwn_attrs[] = {
+	&ft_wwn_version.attr,
+	NULL,
+};
+
+static char *ft_get_fabric_name(void)
+{
+	return "fc";
+}
+
+static char *ft_get_fabric_wwn(struct se_portal_group *se_tpg)
+{
+	struct ft_tpg *tpg = se_tpg->se_tpg_fabric_ptr;
+
+	return tpg->lport_acl->name;
+}
+
+static u16 ft_get_tag(struct se_portal_group *se_tpg)
+{
+	struct ft_tpg *tpg = se_tpg->se_tpg_fabric_ptr;
+
+	/*
+	 * This tag is used when forming SCSI Name identifier in EVPD=1 0x83
+	 * to represent the SCSI Target Port.
+	 */
+	return tpg->index;
+}
+
+static u32 ft_get_default_depth(struct se_portal_group *se_tpg)
+{
+	return 1;
+}
+
+static int ft_check_false(struct se_portal_group *se_tpg)
+{
+	return 0;
+}
+
+static void ft_set_default_node_attr(struct se_node_acl *se_nacl)
+{
+}
+
+static u16 ft_get_fabric_sense_len(void)
+{
+	return 0;
+}
+
+static u16 ft_set_fabric_sense_len(struct se_cmd *se_cmd, u32 sense_len)
+{
+	return 0;
+}
+
+static u32 ft_tpg_get_inst_index(struct se_portal_group *se_tpg)
+{
+	struct ft_tpg *tpg = se_tpg->se_tpg_fabric_ptr;
+
+	return tpg->index;
+}
+
+static u64 ft_pack_lun(unsigned int index)
+{
+	WARN_ON(index >= 256);
+	/* Caller wants this byte-swapped */
+	return cpu_to_le64((index & 0xff) << 8);
+}
+
+static struct target_core_fabric_ops ft_fabric_ops = {
+	.get_fabric_name =		ft_get_fabric_name,
+	.get_fabric_proto_ident =	fc_get_fabric_proto_ident,
+	.tpg_get_wwn =			ft_get_fabric_wwn,
+	.tpg_get_tag =			ft_get_tag,
+	.tpg_get_default_depth =	ft_get_default_depth,
+	.tpg_get_pr_transport_id =	fc_get_pr_transport_id,
+	.tpg_get_pr_transport_id_len =	fc_get_pr_transport_id_len,
+	.tpg_parse_pr_out_transport_id = fc_parse_pr_out_transport_id,
+	.tpg_check_demo_mode =		ft_check_false,
+	.tpg_check_demo_mode_cache =	ft_check_false,
+	.tpg_check_demo_mode_write_protect = ft_check_false,
+	.tpg_check_prod_mode_write_protect = ft_check_false,
+	.tpg_alloc_fabric_acl =		ft_tpg_alloc_fabric_acl,
+	.tpg_release_fabric_acl =	ft_tpg_release_fabric_acl,
+	.tpg_get_inst_index =		ft_tpg_get_inst_index,
+	.check_stop_free =		ft_check_stop_free,
+	.release_cmd_to_pool =		ft_release_cmd,
+	.release_cmd_direct =		ft_release_cmd,
+	.shutdown_session =		ft_sess_shutdown,
+	.close_session =		ft_sess_close,
+	.stop_session =			ft_sess_stop,
+	.fall_back_to_erl0 =		ft_sess_set_erl0,
+	.sess_logged_in =		ft_sess_logged_in,
+	.sess_get_index =		ft_sess_get_index,
+	.sess_get_initiator_sid =	NULL,
+	.write_pending =		ft_write_pending,
+	.write_pending_status =		ft_write_pending_status,
+	.set_default_node_attributes =	ft_set_default_node_attr,
+	.get_task_tag =			ft_get_task_tag,
+	.get_cmd_state =		ft_get_cmd_state,
+	.new_cmd_failure =		ft_new_cmd_failure,
+	.queue_data_in =		ft_queue_data_in,
+	.queue_status =			ft_queue_status,
+	.queue_tm_rsp =			ft_queue_tm_resp,
+	.get_fabric_sense_len =		ft_get_fabric_sense_len,
+	.set_fabric_sense_len =		ft_set_fabric_sense_len,
+	.is_state_remove =		ft_is_state_remove,
+	.pack_lun =			ft_pack_lun,
+	/*
+	 * Setup function pointers for generic logic in
+	 * target_core_fabric_configfs.c
+	 */
+	.fabric_make_wwn =		&ft_add_lport,
+	.fabric_drop_wwn =		&ft_del_lport,
+	.fabric_make_tpg =		&ft_add_tpg,
+	.fabric_drop_tpg =		&ft_del_tpg,
+	.fabric_post_link =		NULL,
+	.fabric_pre_unlink =		NULL,
+	.fabric_make_np =		NULL,
+	.fabric_drop_np =		NULL,
+	.fabric_make_nodeacl =		&ft_add_acl,
+	.fabric_drop_nodeacl =		&ft_del_acl,
+};
+
+int ft_register_configfs(void)
+{
+	struct target_fabric_configfs *fabric;
+	int ret;
+
+	/*
+	 * Register the top level struct config_item_type with TCM core
+	 */
+	fabric = target_fabric_configfs_init(THIS_MODULE, "fc");
+	if (!fabric) {
+		printk(KERN_INFO "%s: target_fabric_configfs_init() failed!\n",
+		       __func__);
+		return -1;
+	}
+	fabric->tf_ops = ft_fabric_ops;
+
+	/* Allowing support for task_sg_chaining */
+	fabric->tf_ops.task_sg_chaining = 1;
+
+	/*
+	 * Setup default attribute lists for various fabric->tf_cit_tmpl
+	 */
+	TF_CIT_TMPL(fabric)->tfc_wwn_cit.ct_attrs = ft_wwn_attrs;
+	TF_CIT_TMPL(fabric)->tfc_tpg_base_cit.ct_attrs = NULL;
+	TF_CIT_TMPL(fabric)->tfc_tpg_attrib_cit.ct_attrs = NULL;
+	TF_CIT_TMPL(fabric)->tfc_tpg_param_cit.ct_attrs = NULL;
+	TF_CIT_TMPL(fabric)->tfc_tpg_np_base_cit.ct_attrs = NULL;
+	TF_CIT_TMPL(fabric)->tfc_tpg_nacl_base_cit.ct_attrs =
+						    ft_nacl_base_attrs;
+	TF_CIT_TMPL(fabric)->tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;
+	TF_CIT_TMPL(fabric)->tfc_tpg_nacl_auth_cit.ct_attrs = NULL;
+	TF_CIT_TMPL(fabric)->tfc_tpg_nacl_param_cit.ct_attrs = NULL;
+	/*
+	 * register the fabric for use within TCM
+	 */
+	ret = target_fabric_configfs_register(fabric);
+	if (ret < 0) {
+		FT_CONF_DBG("target_fabric_configfs_register() for"
+			    " FC Target failed!\n");
+		printk(KERN_INFO
+		       "%s: target_fabric_configfs_register() failed!\n",
+		       __func__);
+		target_fabric_configfs_free(fabric);
+		return -1;
+	}
+
+	/*
+	 * Setup our local pointer to *fabric.
+	 */
+	ft_configfs = fabric;
+	return 0;
+}
+
+void ft_deregister_configfs(void)
+{
+	if (!ft_configfs)
+		return;
+	target_fabric_configfs_deregister(ft_configfs);
+	ft_configfs = NULL;
+}
+
+static struct notifier_block ft_notifier = {
+	.notifier_call = ft_lport_notify
+};
+
+static int __init ft_init(void)
+{
+	if (ft_register_configfs())
+		return -1;
+	if (fc_fc4_register_provider(FC_TYPE_FCP, &ft_prov)) {
+		ft_deregister_configfs();
+		return -1;
+	}
+	blocking_notifier_chain_register(&fc_lport_notifier_head, &ft_notifier);
+	fc_lport_iterate(ft_lport_add, NULL);
+	return 0;
+}
+
+static void __exit ft_exit(void)
+{
+	blocking_notifier_chain_unregister(&fc_lport_notifier_head,
+					   &ft_notifier);
+	fc_fc4_deregister_provider(FC_TYPE_FCP, &ft_prov);
+	fc_lport_iterate(ft_lport_del, NULL);
+	ft_deregister_configfs();
+	synchronize_rcu();
+}
+
+#ifdef MODULE
+MODULE_DESCRIPTION("FC TCM fabric driver " FT_VERSION);
+MODULE_LICENSE("GPL");
+module_init(ft_init);
+module_exit(ft_exit);
+#endif /* MODULE */
diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
new file mode 100644
index 00000000000..4c3c0efbe13
--- /dev/null
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -0,0 +1,374 @@
+/*
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ *
+ * Portions based on tcm_loop_fabric_scsi.c and libfc/fc_fcp.c
+ *
+ * Copyright (c) 2007 Intel Corporation. All rights reserved.
+ * Copyright (c) 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (c) 2008 Mike Christie
+ * Copyright (c) 2009 Rising Tide, Inc.
+ * Copyright (c) 2009 Linux-iSCSI.org
+ * Copyright (c) 2009 Nicholas A. Bellinger <nab@linux-iscsi.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* XXX TBD some includes may be extraneous */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <generated/utsrelease.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <linux/hash.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_encode.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_configfs.h>
+#include <target/target_core_base.h>
+#include <target/configfs_macros.h>
+
+#include "tcm_fc.h"
+
+/*
+ * Deliver read data back to initiator.
+ * XXX TBD handle resource problems later.
+ */
+int ft_queue_data_in(struct se_cmd *se_cmd)
+{
+	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+	struct se_transport_task *task;
+	struct fc_frame *fp = NULL;
+	struct fc_exch *ep;
+	struct fc_lport *lport;
+	struct se_mem *mem;
+	size_t remaining;
+	u32 f_ctl = FC_FC_EX_CTX | FC_FC_REL_OFF;
+	u32 mem_off;
+	u32 fh_off = 0;
+	u32 frame_off = 0;
+	size_t frame_len = 0;
+	size_t mem_len;
+	size_t tlen;
+	size_t off_in_page;
+	struct page *page;
+	int use_sg;
+	int error;
+	void *page_addr;
+	void *from;
+	void *to = NULL;
+
+	ep = fc_seq_exch(cmd->seq);
+	lport = ep->lp;
+	cmd->seq = lport->tt.seq_start_next(cmd->seq);
+
+	task = T_TASK(se_cmd);
+	BUG_ON(!task);
+	remaining = se_cmd->data_length;
+
+	/*
+	 * Setup to use first mem list entry if any.
+	 */
+	if (task->t_tasks_se_num) {
+		mem = list_first_entry(task->t_mem_list,
+			 struct se_mem, se_list);
+		mem_len = mem->se_len;
+		mem_off = mem->se_off;
+		page = mem->se_page;
+	} else {
+		mem = NULL;
+		mem_len = remaining;
+		mem_off = 0;
+		page = NULL;
+	}
+
+	/* no scatter/gather in skb for odd word length due to fc_seq_send() */
+	use_sg = !(remaining % 4);
+
+	while (remaining) {
+		if (!mem_len) {
+			BUG_ON(!mem);
+			mem = list_entry(mem->se_list.next,
+				struct se_mem, se_list);
+			mem_len = min((size_t)mem->se_len, remaining);
+			mem_off = mem->se_off;
+			page = mem->se_page;
+		}
+		if (!frame_len) {
+			/*
+			 * If lport's has capability of Large Send Offload LSO)
+			 * , then allow 'frame_len' to be as big as 'lso_max'
+			 * if indicated transfer length is >= lport->lso_max
+			 */
+			frame_len = (lport->seq_offload) ? lport->lso_max :
+							  cmd->sess->max_frame;
+			frame_len = min(frame_len, remaining);
+			fp = fc_frame_alloc(lport, use_sg ? 0 : frame_len);
+			if (!fp)
+				return -ENOMEM;
+			to = fc_frame_payload_get(fp, 0);
+			fh_off = frame_off;
+			frame_off += frame_len;
+			/*
+			 * Setup the frame's max payload which is used by base
+			 * driver to indicate HW about max frame size, so that
+			 * HW can do fragmentation appropriately based on
+			 * "gso_max_size" of underline netdev.
+			 */
+			fr_max_payload(fp) = cmd->sess->max_frame;
+		}
+		tlen = min(mem_len, frame_len);
+
+		if (use_sg) {
+			if (!mem) {
+				BUG_ON(!task->t_task_buf);
+				page_addr = task->t_task_buf + mem_off;
+				/*
+				 * In this case, offset is 'offset_in_page' of
+				 * (t_task_buf + mem_off) instead of 'mem_off'.
+				 */
+				off_in_page = offset_in_page(page_addr);
+				page = virt_to_page(page_addr);
+				tlen = min(tlen, PAGE_SIZE - off_in_page);
+			} else
+				off_in_page = mem_off;
+			BUG_ON(!page);
+			get_page(page);
+			skb_fill_page_desc(fp_skb(fp),
+					   skb_shinfo(fp_skb(fp))->nr_frags,
+					   page, off_in_page, tlen);
+			fr_len(fp) += tlen;
+			fp_skb(fp)->data_len += tlen;
+			fp_skb(fp)->truesize +=
+					PAGE_SIZE << compound_order(page);
+		} else if (mem) {
+			BUG_ON(!page);
+			from = kmap_atomic(page + (mem_off >> PAGE_SHIFT),
+					   KM_SOFTIRQ0);
+			page_addr = from;
+			from += mem_off & ~PAGE_MASK;
+			tlen = min(tlen, (size_t)(PAGE_SIZE -
+						(mem_off & ~PAGE_MASK)));
+			memcpy(to, from, tlen);
+			kunmap_atomic(page_addr, KM_SOFTIRQ0);
+			to += tlen;
+		} else {
+			from = task->t_task_buf + mem_off;
+			memcpy(to, from, tlen);
+			to += tlen;
+		}
+
+		mem_off += tlen;
+		mem_len -= tlen;
+		frame_len -= tlen;
+		remaining -= tlen;
+
+		if (frame_len &&
+		    (skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN))
+			continue;
+		if (!remaining)
+			f_ctl |= FC_FC_END_SEQ;
+		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
+			       FC_TYPE_FCP, f_ctl, fh_off);
+		error = lport->tt.seq_send(lport, cmd->seq, fp);
+		if (error) {
+			/* XXX For now, initiator will retry */
+			if (printk_ratelimit())
+				printk(KERN_ERR "%s: Failed to send frame %p, "
+						"xid <0x%x>, remaining <0x%x>, "
+						"lso_max <0x%x>\n",
+						__func__, fp, ep->xid,
+						remaining, lport->lso_max);
+		}
+	}
+	return ft_queue_status(se_cmd);
+}
+
+/*
+ * Receive write data frame.
+ */
+void ft_recv_write_data(struct ft_cmd *cmd, struct fc_frame *fp)
+{
+	struct se_cmd *se_cmd = &cmd->se_cmd;
+	struct fc_seq *seq = cmd->seq;
+	struct fc_exch *ep;
+	struct fc_lport *lport;
+	struct se_transport_task *task;
+	struct fc_frame_header *fh;
+	struct se_mem *mem;
+	u32 mem_off;
+	u32 rel_off;
+	size_t frame_len;
+	size_t mem_len;
+	size_t tlen;
+	struct page *page;
+	void *page_addr;
+	void *from;
+	void *to;
+	u32 f_ctl;
+	void *buf;
+
+	task = T_TASK(se_cmd);
+	BUG_ON(!task);
+
+	fh = fc_frame_header_get(fp);
+	if (!(ntoh24(fh->fh_f_ctl) & FC_FC_REL_OFF))
+		goto drop;
+
+	/*
+	 * Doesn't expect even single byte of payload. Payload
+	 * is expected to be copied directly to user buffers
+	 * due to DDP (Large Rx offload) feature, hence
+	 * BUG_ON if BUF is non-NULL
+	 */
+	buf = fc_frame_payload_get(fp, 1);
+	if (cmd->was_ddp_setup && buf) {
+		printk(KERN_INFO "%s: When DDP was setup, not expected to"
+				 "receive frame with payload, Payload shall be"
+				 "copied directly to buffer instead of coming "
+				 "via. legacy receive queues\n", __func__);
+		BUG_ON(buf);
+	}
+
+	/*
+	 * If ft_cmd indicated 'ddp_setup', in that case only the last frame
+	 * should come with 'TSI bit being set'. If 'TSI bit is not set and if
+	 * data frame appears here, means error condition. In both the cases
+	 * release the DDP context (ddp_put) and in error case, as well
+	 * initiate error recovery mechanism.
+	 */
+	ep = fc_seq_exch(seq);
+	if (cmd->was_ddp_setup) {
+		BUG_ON(!ep);
+		lport = ep->lp;
+		BUG_ON(!lport);
+	}
+	if (cmd->was_ddp_setup && ep->xid != FC_XID_UNKNOWN) {
+		f_ctl = ntoh24(fh->fh_f_ctl);
+		/*
+		 * If TSI bit set in f_ctl, means last write data frame is
+		 * received successfully where payload is posted directly
+		 * to user buffer and only the last frame's header is posted
+		 * in legacy receive queue
+		 */
+		if (f_ctl & FC_FC_SEQ_INIT) { /* TSI bit set in FC frame */
+			cmd->write_data_len = lport->tt.ddp_done(lport,
+								ep->xid);
+			goto last_frame;
+		} else {
+			/*
+			 * Updating the write_data_len may be meaningless at
+			 * this point, but just in case if required in future
+			 * for debugging or any other purpose
+			 */
+			printk(KERN_ERR "%s: Received frame with TSI bit not"
+					" being SET, dropping the frame, "
+					"cmd->sg <%p>, cmd->sg_cnt <0x%x>\n",
+					__func__, cmd->sg, cmd->sg_cnt);
+			cmd->write_data_len = lport->tt.ddp_done(lport,
+							      ep->xid);
+			lport->tt.seq_exch_abort(cmd->seq, 0);
+			goto drop;
+		}
+	}
+
+	rel_off = ntohl(fh->fh_parm_offset);
+	frame_len = fr_len(fp);
+	if (frame_len <= sizeof(*fh))
+		goto drop;
+	frame_len -= sizeof(*fh);
+	from = fc_frame_payload_get(fp, 0);
+	if (rel_off >= se_cmd->data_length)
+		goto drop;
+	if (frame_len + rel_off > se_cmd->data_length)
+		frame_len = se_cmd->data_length - rel_off;
+
+	/*
+	 * Setup to use first mem list entry if any.
+	 */
+	if (task->t_tasks_se_num) {
+		mem = list_first_entry(task->t_mem_list,
+				       struct se_mem, se_list);
+		mem_len = mem->se_len;
+		mem_off = mem->se_off;
+		page = mem->se_page;
+	} else {
+		mem = NULL;
+		page = NULL;
+		mem_off = 0;
+		mem_len = frame_len;
+	}
+
+	while (frame_len) {
+		if (!mem_len) {
+			BUG_ON(!mem);
+			mem = list_entry(mem->se_list.next,
+					 struct se_mem, se_list);
+			mem_len = mem->se_len;
+			mem_off = mem->se_off;
+			page = mem->se_page;
+		}
+		if (rel_off >= mem_len) {
+			rel_off -= mem_len;
+			mem_len = 0;
+			continue;
+		}
+		mem_off += rel_off;
+		mem_len -= rel_off;
+		rel_off = 0;
+
+		tlen = min(mem_len, frame_len);
+
+		if (mem) {
+			to = kmap_atomic(page + (mem_off >> PAGE_SHIFT),
+					 KM_SOFTIRQ0);
+			page_addr = to;
+			to += mem_off & ~PAGE_MASK;
+			tlen = min(tlen, (size_t)(PAGE_SIZE -
+						(mem_off & ~PAGE_MASK)));
+			memcpy(to, from, tlen);
+			kunmap_atomic(page_addr, KM_SOFTIRQ0);
+		} else {
+			to = task->t_task_buf + mem_off;
+			memcpy(to, from, tlen);
+		}
+		from += tlen;
+		frame_len -= tlen;
+		mem_off += tlen;
+		mem_len -= tlen;
+		cmd->write_data_len += tlen;
+	}
+last_frame:
+	if (cmd->write_data_len == se_cmd->data_length)
+		transport_generic_handle_data(se_cmd);
+drop:
+	fc_frame_free(fp);
+}
diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c
new file mode 100644
index 00000000000..a3bd57f2ea3
--- /dev/null
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -0,0 +1,541 @@
+/*
+ * Copyright (c) 2010 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* XXX TBD some includes may be extraneous */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <generated/utsrelease.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/configfs.h>
+#include <linux/ctype.h>
+#include <linux/hash.h>
+#include <linux/rcupdate.h>
+#include <linux/rculist.h>
+#include <linux/kref.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/libfc.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include <target/target_core_fabric_ops.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_configfs.h>
+#include <target/target_core_base.h>
+#include <target/configfs_macros.h>
+
+#include <scsi/libfc.h>
+#include "tcm_fc.h"
+
+static void ft_sess_delete_all(struct ft_tport *);
+
+/*
+ * Lookup or allocate target local port.
+ * Caller holds ft_lport_lock.
+ */
+static struct ft_tport *ft_tport_create(struct fc_lport *lport)
+{
+	struct ft_tpg *tpg;
+	struct ft_tport *tport;
+	int i;
+
+	tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+	if (tport && tport->tpg)
+		return tport;
+
+	tpg = ft_lport_find_tpg(lport);
+	if (!tpg)
+		return NULL;
+
+	if (tport) {
+		tport->tpg = tpg;
+		return tport;
+	}
+
+	tport = kzalloc(sizeof(*tport), GFP_KERNEL);
+	if (!tport)
+		return NULL;
+
+	tport->lport = lport;
+	tport->tpg = tpg;
+	tpg->tport = tport;
+	for (i = 0; i < FT_SESS_HASH_SIZE; i++)
+		INIT_HLIST_HEAD(&tport->hash[i]);
+
+	rcu_assign_pointer(lport->prov[FC_TYPE_FCP], tport);
+	return tport;
+}
+
+/*
+ * Free tport via RCU.
+ */
+static void ft_tport_rcu_free(struct rcu_head *rcu)
+{
+	struct ft_tport *tport = container_of(rcu, struct ft_tport, rcu);
+
+	kfree(tport);
+}
+
+/*
+ * Delete a target local port.
+ * Caller holds ft_lport_lock.
+ */
+static void ft_tport_delete(struct ft_tport *tport)
+{
+	struct fc_lport *lport;
+	struct ft_tpg *tpg;
+
+	ft_sess_delete_all(tport);
+	lport = tport->lport;
+	BUG_ON(tport != lport->prov[FC_TYPE_FCP]);
+	rcu_assign_pointer(lport->prov[FC_TYPE_FCP], NULL);
+
+	tpg = tport->tpg;
+	if (tpg) {
+		tpg->tport = NULL;
+		tport->tpg = NULL;
+	}
+	call_rcu(&tport->rcu, ft_tport_rcu_free);
+}
+
+/*
+ * Add local port.
+ * Called thru fc_lport_iterate().
+ */
+void ft_lport_add(struct fc_lport *lport, void *arg)
+{
+	mutex_lock(&ft_lport_lock);
+	ft_tport_create(lport);
+	mutex_unlock(&ft_lport_lock);
+}
+
+/*
+ * Delete local port.
+ * Called thru fc_lport_iterate().
+ */
+void ft_lport_del(struct fc_lport *lport, void *arg)
+{
+	struct ft_tport *tport;
+
+	mutex_lock(&ft_lport_lock);
+	tport = lport->prov[FC_TYPE_FCP];
+	if (tport)
+		ft_tport_delete(tport);
+	mutex_unlock(&ft_lport_lock);
+}
+
+/*
+ * Notification of local port change from libfc.
+ * Create or delete local port and associated tport.
+ */
+int ft_lport_notify(struct notifier_block *nb, unsigned long event, void *arg)
+{
+	struct fc_lport *lport = arg;
+
+	switch (event) {
+	case FC_LPORT_EV_ADD:
+		ft_lport_add(lport, NULL);
+		break;
+	case FC_LPORT_EV_DEL:
+		ft_lport_del(lport, NULL);
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+/*
+ * Hash function for FC_IDs.
+ */
+static u32 ft_sess_hash(u32 port_id)
+{
+	return hash_32(port_id, FT_SESS_HASH_BITS);
+}
+
+/*
+ * Find session in local port.
+ * Sessions and hash lists are RCU-protected.
+ * A reference is taken which must be eventually freed.
+ */
+static struct ft_sess *ft_sess_get(struct fc_lport *lport, u32 port_id)
+{
+	struct ft_tport *tport;
+	struct hlist_head *head;
+	struct hlist_node *pos;
+	struct ft_sess *sess;
+
+	rcu_read_lock();
+	tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+	if (!tport)
+		goto out;
+
+	head = &tport->hash[ft_sess_hash(port_id)];
+	hlist_for_each_entry_rcu(sess, pos, head, hash) {
+		if (sess->port_id == port_id) {
+			kref_get(&sess->kref);
+			rcu_read_unlock();
+			FT_SESS_DBG("port_id %x found %p\n", port_id, sess);
+			return sess;
+		}
+	}
+out:
+	rcu_read_unlock();
+	FT_SESS_DBG("port_id %x not found\n", port_id);
+	return NULL;
+}
+
+/*
+ * Allocate session and enter it in the hash for the local port.
+ * Caller holds ft_lport_lock.
+ */
+static struct ft_sess *ft_sess_create(struct ft_tport *tport, u32 port_id,
+				      struct ft_node_acl *acl)
+{
+	struct ft_sess *sess;
+	struct hlist_head *head;
+	struct hlist_node *pos;
+
+	head = &tport->hash[ft_sess_hash(port_id)];
+	hlist_for_each_entry_rcu(sess, pos, head, hash)
+		if (sess->port_id == port_id)
+			return sess;
+
+	sess = kzalloc(sizeof(*sess), GFP_KERNEL);
+	if (!sess)
+		return NULL;
+
+	sess->se_sess = transport_init_session();
+	if (!sess->se_sess) {
+		kfree(sess);
+		return NULL;
+	}
+	sess->se_sess->se_node_acl = &acl->se_node_acl;
+	sess->tport = tport;
+	sess->port_id = port_id;
+	kref_init(&sess->kref);	/* ref for table entry */
+	hlist_add_head_rcu(&sess->hash, head);
+	tport->sess_count++;
+
+	FT_SESS_DBG("port_id %x sess %p\n", port_id, sess);
+
+	transport_register_session(&tport->tpg->se_tpg, &acl->se_node_acl,
+				   sess->se_sess, sess);
+	return sess;
+}
+
+/*
+ * Unhash the session.
+ * Caller holds ft_lport_lock.
+ */
+static void ft_sess_unhash(struct ft_sess *sess)
+{
+	struct ft_tport *tport = sess->tport;
+
+	hlist_del_rcu(&sess->hash);
+	BUG_ON(!tport->sess_count);
+	tport->sess_count--;
+	sess->port_id = -1;
+	sess->params = 0;
+}
+
+/*
+ * Delete session from hash.
+ * Caller holds ft_lport_lock.
+ */
+static struct ft_sess *ft_sess_delete(struct ft_tport *tport, u32 port_id)
+{
+	struct hlist_head *head;
+	struct hlist_node *pos;
+	struct ft_sess *sess;
+
+	head = &tport->hash[ft_sess_hash(port_id)];
+	hlist_for_each_entry_rcu(sess, pos, head, hash) {
+		if (sess->port_id == port_id) {
+			ft_sess_unhash(sess);
+			return sess;
+		}
+	}
+	return NULL;
+}
+
+/*
+ * Delete all sessions from tport.
+ * Caller holds ft_lport_lock.
+ */
+static void ft_sess_delete_all(struct ft_tport *tport)
+{
+	struct hlist_head *head;
+	struct hlist_node *pos;
+	struct ft_sess *sess;
+
+	for (head = tport->hash;
+	     head < &tport->hash[FT_SESS_HASH_SIZE]; head++) {
+		hlist_for_each_entry_rcu(sess, pos, head, hash) {
+			ft_sess_unhash(sess);
+			transport_deregister_session_configfs(sess->se_sess);
+			ft_sess_put(sess);	/* release from table */
+		}
+	}
+}
+
+/*
+ * TCM ops for sessions.
+ */
+
+/*
+ * Determine whether session is allowed to be shutdown in the current context.
+ * Returns non-zero if the session should be shutdown.
+ */
+int ft_sess_shutdown(struct se_session *se_sess)
+{
+	struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+	FT_SESS_DBG("port_id %x\n", sess->port_id);
+	return 1;
+}
+
+/*
+ * Remove session and send PRLO.
+ * This is called when the ACL is being deleted or queue depth is changing.
+ */
+void ft_sess_close(struct se_session *se_sess)
+{
+	struct ft_sess *sess = se_sess->fabric_sess_ptr;
+	struct fc_lport *lport;
+	u32 port_id;
+
+	mutex_lock(&ft_lport_lock);
+	lport = sess->tport->lport;
+	port_id = sess->port_id;
+	if (port_id == -1) {
+		mutex_lock(&ft_lport_lock);
+		return;
+	}
+	FT_SESS_DBG("port_id %x\n", port_id);
+	ft_sess_unhash(sess);
+	mutex_unlock(&ft_lport_lock);
+	transport_deregister_session_configfs(se_sess);
+	ft_sess_put(sess);
+	/* XXX Send LOGO or PRLO */
+	synchronize_rcu();		/* let transport deregister happen */
+}
+
+void ft_sess_stop(struct se_session *se_sess, int sess_sleep, int conn_sleep)
+{
+	struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+	FT_SESS_DBG("port_id %x\n", sess->port_id);
+}
+
+int ft_sess_logged_in(struct se_session *se_sess)
+{
+	struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+	return sess->port_id != -1;
+}
+
+u32 ft_sess_get_index(struct se_session *se_sess)
+{
+	struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+	return sess->port_id;	/* XXX TBD probably not what is needed */
+}
+
+u32 ft_sess_get_port_name(struct se_session *se_sess,
+			  unsigned char *buf, u32 len)
+{
+	struct ft_sess *sess = se_sess->fabric_sess_ptr;
+
+	return ft_format_wwn(buf, len, sess->port_name);
+}
+
+void ft_sess_set_erl0(struct se_session *se_sess)
+{
+	/* XXX TBD called when out of memory */
+}
+
+/*
+ * libfc ops involving sessions.
+ */
+
+static int ft_prli_locked(struct fc_rport_priv *rdata, u32 spp_len,
+			  const struct fc_els_spp *rspp, struct fc_els_spp *spp)
+{
+	struct ft_tport *tport;
+	struct ft_sess *sess;
+	struct ft_node_acl *acl;
+	u32 fcp_parm;
+
+	tport = ft_tport_create(rdata->local_port);
+	if (!tport)
+		return 0;	/* not a target for this local port */
+
+	acl = ft_acl_get(tport->tpg, rdata);
+	if (!acl)
+		return 0;
+
+	if (!rspp)
+		goto fill;
+
+	if (rspp->spp_flags & (FC_SPP_OPA_VAL | FC_SPP_RPA_VAL))
+		return FC_SPP_RESP_NO_PA;
+
+	/*
+	 * If both target and initiator bits are off, the SPP is invalid.
+	 */
+	fcp_parm = ntohl(rspp->spp_params);
+	if (!(fcp_parm & (FCP_SPPF_INIT_FCN | FCP_SPPF_TARG_FCN)))
+		return FC_SPP_RESP_INVL;
+
+	/*
+	 * Create session (image pair) only if requested by
+	 * EST_IMG_PAIR flag and if the requestor is an initiator.
+	 */
+	if (rspp->spp_flags & FC_SPP_EST_IMG_PAIR) {
+		spp->spp_flags |= FC_SPP_EST_IMG_PAIR;
+		if (!(fcp_parm & FCP_SPPF_INIT_FCN))
+			return FC_SPP_RESP_CONF;
+		sess = ft_sess_create(tport, rdata->ids.port_id, acl);
+		if (!sess)
+			return FC_SPP_RESP_RES;
+		if (!sess->params)
+			rdata->prli_count++;
+		sess->params = fcp_parm;
+		sess->port_name = rdata->ids.port_name;
+		sess->max_frame = rdata->maxframe_size;
+
+		/* XXX TBD - clearing actions.  unit attn, see 4.10 */
+	}
+
+	/*
+	 * OR in our service parameters with other provider (initiator), if any.
+	 * TBD XXX - indicate RETRY capability?
+	 */
+fill:
+	fcp_parm = ntohl(spp->spp_params);
+	spp->spp_params = htonl(fcp_parm | FCP_SPPF_TARG_FCN);
+	return FC_SPP_RESP_ACK;
+}
+
+/**
+ * tcm_fcp_prli() - Handle incoming or outgoing PRLI for the FCP target
+ * @rdata: remote port private
+ * @spp_len: service parameter page length
+ * @rspp: received service parameter page (NULL for outgoing PRLI)
+ * @spp: response service parameter page
+ *
+ * Returns spp response code.
+ */
+static int ft_prli(struct fc_rport_priv *rdata, u32 spp_len,
+		   const struct fc_els_spp *rspp, struct fc_els_spp *spp)
+{
+	int ret;
+
+	mutex_lock(&ft_lport_lock);
+	ret = ft_prli_locked(rdata, spp_len, rspp, spp);
+	mutex_unlock(&ft_lport_lock);
+	FT_SESS_DBG("port_id %x flags %x ret %x\n",
+	       rdata->ids.port_id, rspp ? rspp->spp_flags : 0, ret);
+	return ret;
+}
+
+static void ft_sess_rcu_free(struct rcu_head *rcu)
+{
+	struct ft_sess *sess = container_of(rcu, struct ft_sess, rcu);
+
+	transport_deregister_session(sess->se_sess);
+	kfree(sess);
+}
+
+static void ft_sess_free(struct kref *kref)
+{
+	struct ft_sess *sess = container_of(kref, struct ft_sess, kref);
+
+	call_rcu(&sess->rcu, ft_sess_rcu_free);
+}
+
+void ft_sess_put(struct ft_sess *sess)
+{
+	int sess_held = atomic_read(&sess->kref.refcount);
+
+	BUG_ON(!sess_held);
+	kref_put(&sess->kref, ft_sess_free);
+}
+
+static void ft_prlo(struct fc_rport_priv *rdata)
+{
+	struct ft_sess *sess;
+	struct ft_tport *tport;
+
+	mutex_lock(&ft_lport_lock);
+	tport = rcu_dereference(rdata->local_port->prov[FC_TYPE_FCP]);
+	if (!tport) {
+		mutex_unlock(&ft_lport_lock);
+		return;
+	}
+	sess = ft_sess_delete(tport, rdata->ids.port_id);
+	if (!sess) {
+		mutex_unlock(&ft_lport_lock);
+		return;
+	}
+	mutex_unlock(&ft_lport_lock);
+	transport_deregister_session_configfs(sess->se_sess);
+	ft_sess_put(sess);		/* release from table */
+	rdata->prli_count--;
+	/* XXX TBD - clearing actions.  unit attn, see 4.10 */
+}
+
+/*
+ * Handle incoming FCP request.
+ * Caller has verified that the frame is type FCP.
+ */
+static void ft_recv(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct ft_sess *sess;
+	u32 sid = fc_frame_sid(fp);
+
+	FT_SESS_DBG("sid %x\n", sid);
+
+	sess = ft_sess_get(lport, sid);
+	if (!sess) {
+		FT_SESS_DBG("sid %x sess lookup failed\n", sid);
+		/* TBD XXX - if FCP_CMND, send PRLO */
+		fc_frame_free(fp);
+		return;
+	}
+	ft_recv_req(sess, fp);	/* must do ft_sess_put() */
+}
+
+/*
+ * Provider ops for libfc.
+ */
+struct fc4_prov ft_prov = {
+	.prli = ft_prli,
+	.prlo = ft_prlo,
+	.recv = ft_recv,
+	.module = THIS_MODULE,
+};
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index b00101972f2..d5f923bcdff 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -169,7 +169,7 @@
  * Added support for Linux 2.4.x kernels.
  *
  * Revision 3.77  2001/01/09 04:00:52  eokerson
- * Linetest will now test the line, even if it has previously succeded.
+ * Linetest will now test the line, even if it has previously succeeded.
  *
  * Revision 3.76  2001/01/08 19:27:00  eokerson
  * Fixed problem with standard cable on Internet PhoneCARD.
@@ -352,7 +352,7 @@ static void ixj_fsk_alloc(IXJ *j)
 		} else {
 			j->fsksize = 8000;
 			if(ixjdebug & 0x0200) {
-				printk("IXJ phone%d - allocate succeded\n", j->board);
+				printk("IXJ phone%d - allocate succeeded\n", j->board);
 			}
 		}
 	}
@@ -487,7 +487,7 @@ DSPbase +
 8-9		Hardware Status Register			Read Only
 A-B		Hardware Control Register			Read Write
 C-D Host Transmit (Write) Data Buffer Access Port (buffer input)Write Only
-E-F Host Recieve (Read) Data Buffer Access Port (buffer input)	Read Only
+E-F Host Receive (Read) Data Buffer Access Port (buffer input)	Read Only
 ************************************************************************/
 
 static inline void ixj_read_HSR(IXJ *j)
@@ -4195,7 +4195,7 @@ static void ixj_aec_start(IXJ *j, int level)
 			ixj_WriteDSPCommand(0xE338, j);	/* Set Echo Suppresser Attenuation to 0dB */
 
 			/* Now we can set the AGC initial parameters and turn it on */
-			ixj_WriteDSPCommand(0xCF90, j);	/* Set AGC Minumum gain */
+			ixj_WriteDSPCommand(0xCF90, j);	/* Set AGC Minimum gain */
 			ixj_WriteDSPCommand(0x0020, j);	/* to 0.125 (-18dB) */
 	
 			ixj_WriteDSPCommand(0xCF91, j);	/* Set AGC Maximum gain */
diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h
index 4c32a43b791..2c841134f61 100644
--- a/drivers/telephony/ixj.h
+++ b/drivers/telephony/ixj.h
@@ -1149,7 +1149,7 @@ typedef struct {
 	unsigned int firstring:1; /* First ring cadence is complete */
 	unsigned int pstncheck:1;	/* Currently checking the PSTN Line */
 	unsigned int pstn_rmr:1;
-	unsigned int x:3;	/* unsed bits */
+	unsigned int x:3;	/* unused bits */
 
 } IXJ_FLAGS;
 
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index c3425bb3a1f..b6f7d52f7c3 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -255,7 +255,7 @@ static int hvc_iucv_write(struct hvc_iucv_private *priv,
 		default:
 			written = -EIO;
 		}
-		/* remove buffer if an error has occured or received data
+		/* remove buffer if an error has occurred or received data
 		 * is not correct */
 		if (rc || (rb->mbuf->version != MSG_VERSION) ||
 			  (rb->msg.length    != MSG_SIZE(rb->mbuf->datalen)))
@@ -620,7 +620,7 @@ static void hvc_iucv_hangup(struct hvc_iucv_private *priv)
  *		the index of an struct hvc_iucv_private instance.
  *
  * This routine notifies the HVC back-end that a tty hangup (carrier loss,
- * virtual or otherwise) has occured.
+ * virtual or otherwise) has occurred.
  * The z/VM IUCV HVC device driver ignores virtual hangups (vhangup())
  * to keep an existing IUCV communication path established.
  * (Background: vhangup() is called from user space (by getty or login) to
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 5e2f52b3332..e6eea148524 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -1,7 +1,7 @@
 /*
  * vio driver interface to hvc_console.c
  *
- * This code was moved here to allow the remaing code to be reused as a
+ * This code was moved here to allow the remaining code to be reused as a
  * generic polling mode with semi-reliable transport driver core to the
  * console and tty subsystems.
  *
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index bef238f9ffd..4c8b6654693 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -118,7 +118,7 @@
  * arch/powerepc/include/asm/hvcserver.h
  *
  * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to
- * prevent possible lockup with realtime scheduling as similarily pointed out by
+ * prevent possible lockup with realtime scheduling as similarly pointed out by
  * akpm in hvc_console.  Changed resulted in the removal of hvcs_final_close()
  * to reorder cleanup operations and prevent discarding of pending data during
  * an hvcs_close().  Removed spinlock protection of hvcs_struct data members in
@@ -581,7 +581,7 @@ static void hvcs_try_write(struct hvcs_struct *hvcsd)
 			/*
 			 * We are still obligated to deliver the data to the
 			 * hypervisor even if the tty has been closed because
-			 * we commited to delivering it.  But don't try to wake
+			 * we committed to delivering it.  But don't try to wake
 			 * a non-existent tty.
 			 */
 			if (tty) {
@@ -1349,7 +1349,7 @@ static int hvcs_write(struct tty_struct *tty,
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
 	/*
-	 * Somehow an open succedded but the device was removed or the
+	 * Somehow an open succeeded but the device was removed or the
 	 * connection terminated between the vty-server and partner vty during
 	 * the middle of a write operation?  This is a crummy place to do this
 	 * but we want to keep it all in the spinlock.
@@ -1420,7 +1420,7 @@ static int hvcs_write(struct tty_struct *tty,
 }
 
 /*
- * This is really asking how much can we guarentee that we can send or that we
+ * This is really asking how much can we guarantee that we can send or that we
  * absolutely WILL BUFFER if we can't send it.  This driver MUST honor the
  * return value, hence the reason for hvcs_struct buffering.
  */
diff --git a/drivers/tty/mxser.h b/drivers/tty/mxser.h
index 41878a69203..0bf794313ff 100644
--- a/drivers/tty/mxser.h
+++ b/drivers/tty/mxser.h
@@ -113,7 +113,7 @@
 #define MOXA_MUST_IIR_RTO		0x0C
 #define MOXA_MUST_IIR_LSR		0x06
 
-/* recieved Xon/Xoff or specical interrupt pending */
+/* received Xon/Xoff or specical interrupt pending */
 #define MOXA_MUST_IIR_XSC		0x10
 
 /* RTS/CTS change state interrupt pending */
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 176f63256b3..74273e638c0 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -74,7 +74,7 @@ module_param(debug, int, 0600);
 #endif
 
 /*
- * Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
+ * Semi-arbitrary buffer size limits. 0710 is normally run with 32-64 byte
  * limits so this is plenty
  */
 #define MAX_MRU 512
@@ -82,7 +82,7 @@ module_param(debug, int, 0600);
 
 /*
  *	Each block of data we have queued to go out is in the form of
- *	a gsm_msg which holds everything we need in a link layer independant
+ *	a gsm_msg which holds everything we need in a link layer independent
  *	format
  */
 
@@ -1193,8 +1193,8 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
 		break;
 		/* Optional unsupported commands */
 	case CMD_PN:	/* Parameter negotiation */
-	case CMD_RPN:	/* Remote port negotation */
-	case CMD_SNC:	/* Service negotation command */
+	case CMD_RPN:	/* Remote port negotiation */
+	case CMD_SNC:	/* Service negotiation command */
 	default:
 		/* Reply to bad commands with an NSC */
 		buf[0] = command;
@@ -1658,8 +1658,12 @@ static void gsm_queue(struct gsm_mux *gsm)
 
 	if ((gsm->control & ~PF) == UI)
 		gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len);
-	/* generate final CRC with received FCS */
-	gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs);
+	if (gsm->encoding == 0){
+		/* WARNING: gsm->received_fcs is used for gsm->encoding = 0 only.
+		            In this case it contain the last piece of data
+		            required to generate final CRC */
+		gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs);
+	}
 	if (gsm->fcs != GOOD_FCS) {
 		gsm->bad_fcs++;
 		if (debug & 4)
@@ -2026,7 +2030,7 @@ EXPORT_SYMBOL_GPL(gsm_activate_mux);
  *	@mux: mux to free
  *
  *	Dispose of allocated resources for a dead mux. No refcounting
- *	at present so the mux must be truely dead.
+ *	at present so the mux must be truly dead.
  */
 void gsm_free_mux(struct gsm_mux *gsm)
 {
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 428f4fe0b5f..0ad32888091 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -95,6 +95,7 @@ static void n_tty_set_room(struct tty_struct *tty)
 {
 	/* tty->read_cnt is not read locked ? */
 	int	left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+	int old_left;
 
 	/*
 	 * If we are doing input canonicalization, and there are no
@@ -104,7 +105,12 @@ static void n_tty_set_room(struct tty_struct *tty)
 	 */
 	if (left <= 0)
 		left = tty->icanon && !tty->canon_data;
+	old_left = tty->receive_room;
 	tty->receive_room = left;
+
+	/* Did this open up the receive buffer? We may need to flip */
+	if (left && !old_left)
+		schedule_work(&tty->buf.work);
 }
 
 static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index f4f11164efe..fd0a98524d5 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1673,7 +1673,7 @@ static void ntty_hangup(struct tty_struct *tty)
 
 /*
  * called when the userspace process writes to the tty (/dev/noz*).
- * Data is inserted into a fifo, which is then read and transfered to the modem.
+ * Data is inserted into a fifo, which is then read and transferred to the modem.
  */
 static int ntty_write(struct tty_struct *tty, const unsigned char *buffer,
 		      int count)
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 3780da8ad12..036feeb5e3f 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -2060,7 +2060,7 @@ static __init int register_PCI(int i, struct pci_dev *dev)
 			sClockPrescale = 0x19;
 			rp_baud_base[i] = 230400;
 		} else {
-			/* mod 4 (devide by 5) prescale */
+			/* mod 4 (divide by 5) prescale */
 			sClockPrescale = 0x14;
 			rp_baud_base[i] = 460800;
 		}
@@ -2183,7 +2183,7 @@ static int __init init_ISA(int i)
 		sClockPrescale = 0x19;	/* mod 9 (divide by 10) prescale */
 		rp_baud_base[i] = 230400;
 	} else {
-		sClockPrescale = 0x14;	/* mod 4 (devide by 5) prescale */
+		sClockPrescale = 0x14;	/* mod 4 (divide by 5) prescale */
 		rp_baud_base[i] = 460800;
 	}
 
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b3b881bc471..6611535f444 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1629,7 +1629,7 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 			    up->port.iotype == UPIO_DWAPB32) &&
 			  (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 			/* The DesignWare APB UART has an Busy Detect (0x07)
-			 * interrupt meaning an LCR write attempt occured while the
+			 * interrupt meaning an LCR write attempt occurred while the
 			 * UART was busy. The interrupt must be cleared by reading
 			 * the UART status register (USR) and the LCR re-written. */
 			unsigned int status;
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 8b8930f700b..738cec9807d 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -433,7 +433,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
 /*
  * SIIG serial cards have an PCI interface chip which also controls
  * the UART clocking frequency. Each UART can be clocked independently
- * (except cards equiped with 4 UARTs) and initial clocking settings
+ * (except cards equipped with 4 UARTs) and initial clocking settings
  * are stored in the EEPROM chip. It can cause problems because this
  * version of serial driver doesn't support differently clocked UART's
  * on single PCI card. To prevent this, initialization functions set
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e1aee37270f..b1f0f83b870 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1391,6 +1391,14 @@ config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
 	help
 	  Support for Console on the NWP serial ports.
 
+config SERIAL_LANTIQ
+	bool "Lantiq serial driver"
+	depends on LANTIQ
+	select SERIAL_CORE
+	select SERIAL_CORE_CONSOLE
+	help
+	  Support for console and UART on Lantiq SoCs.
+
 config SERIAL_QE
 	tristate "Freescale QUICC Engine serial port support"
 	depends on QUICC_ENGINE
@@ -1506,7 +1514,7 @@ config SERIAL_BCM63XX_CONSOLE
 
 config SERIAL_GRLIB_GAISLER_APBUART
 	tristate "GRLIB APBUART serial support"
-	depends on OF
+	depends on OF && SPARC
 	select SERIAL_CORE
 	---help---
 	Add support for the GRLIB APBUART serial port.
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index fee0690ef8e..35276043d9d 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
 obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
 obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
+obj-$(CONFIG_SERIAL_LANTIQ)	+= lantiq.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 57731e87008..6deee4e546b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -520,7 +520,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
 
 	/*
 	 * We don't have a TX buffer queued, so try to queue one.
-	 * If we succesfully queued a buffer, mask the TX IRQ.
+	 * If we successfully queued a buffer, mask the TX IRQ.
 	 */
 	if (pl011_dma_tx_refill(uap) > 0) {
 		uap->im &= ~UART011_TXIM;
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 1ab999b04ef..19a943693e4 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -555,10 +555,9 @@ static struct uart_driver grlib_apbuart_driver = {
 
 static int __devinit apbuart_probe(struct platform_device *op)
 {
-	int i = -1;
+	int i;
 	struct uart_port *port = NULL;
 
-	i = 0;
 	for (i = 0; i < grlib_apbuart_port_nr; i++) {
 		if (op->dev.of_node == grlib_apbuart_nodes[i])
 			break;
@@ -566,6 +565,7 @@ static int __devinit apbuart_probe(struct platform_device *op)
 
 	port = &grlib_apbuart_ports[i];
 	port->dev = &op->dev;
+	port->irq = op->archdata.irqs[0];
 
 	uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
 
@@ -598,24 +598,12 @@ static struct platform_driver grlib_apbuart_of_driver = {
 
 static int grlib_apbuart_configure(void)
 {
-	struct device_node *np, *rp;
-	const u32 *prop;
-	int freq_khz, line = 0;
-
-	/* Get bus frequency */
-	rp = of_find_node_by_path("/");
-	if (!rp)
-		return -ENODEV;
-	rp = of_get_next_child(rp, NULL);
-	if (!rp)
-		return -ENODEV;
-	prop = of_get_property(rp, "clock-frequency", NULL);
-	if (!prop)
-		return -ENODEV;
-	freq_khz = *prop;
+	struct device_node *np;
+	int line = 0;
 
 	for_each_matching_node(np, apbuart_match) {
-		const int *irqs, *ampopts;
+		const int *ampopts;
+		const u32 *freq_hz;
 		const struct amba_prom_registers *regs;
 		struct uart_port *port;
 		unsigned long addr;
@@ -623,11 +611,11 @@ static int grlib_apbuart_configure(void)
 		ampopts = of_get_property(np, "ampopts", NULL);
 		if (ampopts && (*ampopts == 0))
 			continue; /* Ignore if used by another OS instance */
-
-		irqs = of_get_property(np, "interrupts", NULL);
 		regs = of_get_property(np, "reg", NULL);
+		/* Frequency of APB Bus is frequency of UART */
+		freq_hz = of_get_property(np, "freq", NULL);
 
-		if (!irqs || !regs)
+		if (!regs || !freq_hz || (*freq_hz == 0))
 			continue;
 
 		grlib_apbuart_nodes[line] = np;
@@ -638,12 +626,12 @@ static int grlib_apbuart_configure(void)
 
 		port->mapbase = addr;
 		port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
-		port->irq = *irqs;
+		port->irq = 0;
 		port->iotype = UPIO_MEM;
 		port->ops = &grlib_apbuart_ops;
 		port->flags = UPF_BOOT_AUTOCONF;
 		port->line = line;
-		port->uartclk = freq_khz * 1000;
+		port->uartclk = *freq_hz;
 		port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
 		line++;
 
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 53a46822705..8a869e58f6d 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1248,7 +1248,7 @@ static void icom_set_termios(struct uart_port *port,
 		}
 	}
 
-	/* Enable Transmitter and Reciever */
+	/* Enable Transmitter and Receiver */
 	offset =
 	    (unsigned long) &ICOM_PORT->statStg->rcv[0] -
 	    (unsigned long) ICOM_PORT->statStg;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dfcf4b1878a..62df72d9f0a 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -78,7 +78,7 @@
 #define  URXD_FRMERR     (1<<12)
 #define  URXD_BRK        (1<<11)
 #define  URXD_PRERR      (1<<10)
-#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
+#define  UCR1_ADEN       (1<<15) /* Auto detect interrupt */
 #define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
 #define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
 #define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
@@ -382,12 +382,13 @@ static void imx_start_tx(struct uart_port *port)
 static irqreturn_t imx_rtsint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
-	unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
+	unsigned int val;
 	unsigned long flags;
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
 	writel(USR1_RTSD, sport->port.membase + USR1);
+	val = readl(sport->port.membase + USR1) & USR1_RTSS;
 	uart_handle_cts_change(&sport->port, !!val);
 	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index ebff4a1d4bc..7b1cda59ebb 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -375,7 +375,7 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
 		 * be nice to transmit console writes just like we normally would for
 		 * a TTY line. (ie. buffered and TX interrupt driven).  That is not
 		 * easy because console writes cannot sleep.  One solution might be
-		 * to poll on enough port->xmit space becomming free.  -DaveM
+		 * to poll on enough port->xmit space becoming free.  -DaveM
 		 */
 		if (!(status & Tx_BUF_EMP))
 			return;
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index 38a509c684c..b704c8ce0d7 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -273,7 +273,7 @@ struct neo_uart_struct {
 	 u8 fctr;		/* WR	FCTR - Feature Control Reg */
 	 u8 efr;		/* WR	EFR - Enhanced Function Reg */
 	 u8 tfifo;		/* WR	TXCNT/TXTRG - Transmit FIFO Reg */
-	 u8 rfifo;		/* WR	RXCNT/RXTRG - Recieve FIFO Reg */
+	 u8 rfifo;		/* WR	RXCNT/RXTRG - Receive FIFO Reg */
 	 u8 xoffchar1;	/* WR	XOFF 1 - XOff Character 1 Reg */
 	 u8 xoffchar2;	/* WR	XOFF 2 - XOff Character 2 Reg */
 	 u8 xonchar1;	/* WR	XON 1 - Xon Character 1 Reg */
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 7960d9633c1..4538c3e3646 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -381,7 +381,7 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
 		/* Copy data from uart to the queue */
 		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
 		/*
-		 * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed
+		 * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed
 		 * that all the data currently in the FIFO is free of
 		 * breaks and parity/frame/orun errors.
 		 */
@@ -1210,7 +1210,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 			 * Why would I check EVERY possibility of type of
 			 * interrupt, when we know its TXRDY???
 			 * Becuz for some reason, even tho we got triggered for TXRDY,
-			 * it seems to be occassionally wrong. Instead of TX, which
+			 * it seems to be occasionally wrong. Instead of TX, which
 			 * it should be, I was getting things like RXDY too. Weird.
 			 */
 			neo_parse_isr(brd, port);
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
new file mode 100644
index 00000000000..58cf279ed87
--- /dev/null
+++ b/drivers/tty/serial/lantiq.c
@@ -0,0 +1,756 @@
+/*
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Copyright (C) 2004 Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <lantiq_soc.h>
+
+#define PORT_LTQ_ASC		111
+#define MAXPORTS		2
+#define UART_DUMMY_UER_RX	1
+#define DRVNAME			"ltq_asc"
+#ifdef __BIG_ENDIAN
+#define LTQ_ASC_TBUF		(0x0020 + 3)
+#define LTQ_ASC_RBUF		(0x0024 + 3)
+#else
+#define LTQ_ASC_TBUF		0x0020
+#define LTQ_ASC_RBUF		0x0024
+#endif
+#define LTQ_ASC_FSTAT		0x0048
+#define LTQ_ASC_WHBSTATE	0x0018
+#define LTQ_ASC_STATE		0x0014
+#define LTQ_ASC_IRNCR		0x00F8
+#define LTQ_ASC_CLC		0x0000
+#define LTQ_ASC_ID		0x0008
+#define LTQ_ASC_PISEL		0x0004
+#define LTQ_ASC_TXFCON		0x0044
+#define LTQ_ASC_RXFCON		0x0040
+#define LTQ_ASC_CON		0x0010
+#define LTQ_ASC_BG		0x0050
+#define LTQ_ASC_IRNREN		0x00F4
+
+#define ASC_IRNREN_TX		0x1
+#define ASC_IRNREN_RX		0x2
+#define ASC_IRNREN_ERR		0x4
+#define ASC_IRNREN_TX_BUF	0x8
+#define ASC_IRNCR_TIR		0x1
+#define ASC_IRNCR_RIR		0x2
+#define ASC_IRNCR_EIR		0x4
+
+#define ASCOPT_CSIZE		0x3
+#define TXFIFO_FL		1
+#define RXFIFO_FL		1
+#define ASCCLC_DISS		0x2
+#define ASCCLC_RMCMASK		0x0000FF00
+#define ASCCLC_RMCOFFSET	8
+#define ASCCON_M_8ASYNC		0x0
+#define ASCCON_M_7ASYNC		0x2
+#define ASCCON_ODD		0x00000020
+#define ASCCON_STP		0x00000080
+#define ASCCON_BRS		0x00000100
+#define ASCCON_FDE		0x00000200
+#define ASCCON_R		0x00008000
+#define ASCCON_FEN		0x00020000
+#define ASCCON_ROEN		0x00080000
+#define ASCCON_TOEN		0x00100000
+#define ASCSTATE_PE		0x00010000
+#define ASCSTATE_FE		0x00020000
+#define ASCSTATE_ROE		0x00080000
+#define ASCSTATE_ANY		(ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
+#define ASCWHBSTATE_CLRREN	0x00000001
+#define ASCWHBSTATE_SETREN	0x00000002
+#define ASCWHBSTATE_CLRPE	0x00000004
+#define ASCWHBSTATE_CLRFE	0x00000008
+#define ASCWHBSTATE_CLRROE	0x00000020
+#define ASCTXFCON_TXFEN		0x0001
+#define ASCTXFCON_TXFFLU	0x0002
+#define ASCTXFCON_TXFITLMASK	0x3F00
+#define ASCTXFCON_TXFITLOFF	8
+#define ASCRXFCON_RXFEN		0x0001
+#define ASCRXFCON_RXFFLU	0x0002
+#define ASCRXFCON_RXFITLMASK	0x3F00
+#define ASCRXFCON_RXFITLOFF	8
+#define ASCFSTAT_RXFFLMASK	0x003F
+#define ASCFSTAT_TXFFLMASK	0x3F00
+#define ASCFSTAT_TXFREEMASK	0x3F000000
+#define ASCFSTAT_TXFREEOFF	24
+
+static void lqasc_tx_chars(struct uart_port *port);
+static struct ltq_uart_port *lqasc_port[MAXPORTS];
+static struct uart_driver lqasc_reg;
+static DEFINE_SPINLOCK(ltq_asc_lock);
+
+struct ltq_uart_port {
+	struct uart_port	port;
+	struct clk		*clk;
+	unsigned int		tx_irq;
+	unsigned int		rx_irq;
+	unsigned int		err_irq;
+};
+
+static inline struct
+ltq_uart_port *to_ltq_uart_port(struct uart_port *port)
+{
+	return container_of(port, struct ltq_uart_port, port);
+}
+
+static void
+lqasc_stop_tx(struct uart_port *port)
+{
+	return;
+}
+
+static void
+lqasc_start_tx(struct uart_port *port)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	lqasc_tx_chars(port);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return;
+}
+
+static void
+lqasc_stop_rx(struct uart_port *port)
+{
+	ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
+}
+
+static void
+lqasc_enable_ms(struct uart_port *port)
+{
+}
+
+static int
+lqasc_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	unsigned int ch = 0, rsr = 0, fifocnt;
+
+	if (!tty) {
+		dev_dbg(port->dev, "%s:tty is busy now", __func__);
+		return -EBUSY;
+	}
+	fifocnt =
+		ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+	while (fifocnt--) {
+		u8 flag = TTY_NORMAL;
+		ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
+		rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
+			& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
+		tty_flip_buffer_push(tty);
+		port->icount.rx++;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		if (rsr & ASCSTATE_ANY) {
+			if (rsr & ASCSTATE_PE) {
+				port->icount.parity++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRPE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			} else if (rsr & ASCSTATE_FE) {
+				port->icount.frame++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRFE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			}
+			if (rsr & ASCSTATE_ROE) {
+				port->icount.overrun++;
+				ltq_w32_mask(0, ASCWHBSTATE_CLRROE,
+					port->membase + LTQ_ASC_WHBSTATE);
+			}
+
+			rsr &= port->read_status_mask;
+
+			if (rsr & ASCSTATE_PE)
+				flag = TTY_PARITY;
+			else if (rsr & ASCSTATE_FE)
+				flag = TTY_FRAME;
+		}
+
+		if ((rsr & port->ignore_status_mask) == 0)
+			tty_insert_flip_char(tty, ch, flag);
+
+		if (rsr & ASCSTATE_ROE)
+			/*
+			 * Overrun is special, since it's reported
+			 * immediately, and doesn't affect the current
+			 * character
+			 */
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	}
+	if (ch != 0)
+		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+	return 0;
+}
+
+static void
+lqasc_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	if (uart_tx_stopped(port)) {
+		lqasc_stop_tx(port);
+		return;
+	}
+
+	while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) &
+		ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
+		if (port->x_char) {
+			ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF);
+			port->icount.tx++;
+			port->x_char = 0;
+			continue;
+		}
+
+		if (uart_circ_empty(xmit))
+			break;
+
+		ltq_w8(port->state->xmit.buf[port->state->xmit.tail],
+			port->membase + LTQ_ASC_TBUF);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static irqreturn_t
+lqasc_tx_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	lqasc_start_tx(port);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+lqasc_err_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	/* clear any pending interrupts */
+	ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
+		ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t
+lqasc_rx_int(int irq, void *_port)
+{
+	unsigned long flags;
+	struct uart_port *port = (struct uart_port *)_port;
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
+	lqasc_rx_chars(port);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static unsigned int
+lqasc_tx_empty(struct uart_port *port)
+{
+	int status;
+	status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+	return status ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int
+lqasc_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
+}
+
+static void
+lqasc_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+}
+
+static void
+lqasc_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int
+lqasc_startup(struct uart_port *port)
+{
+	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+	int retval;
+
+	port->uartclk = clk_get_rate(ltq_port->clk);
+
+	ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
+		port->membase + LTQ_ASC_CLC);
+
+	ltq_w32(0, port->membase + LTQ_ASC_PISEL);
+	ltq_w32(
+		((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
+		ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
+		port->membase + LTQ_ASC_TXFCON);
+	ltq_w32(
+		((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
+		| ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
+		port->membase + LTQ_ASC_RXFCON);
+	/* make sure other settings are written to hardware before
+	 * setting enable bits
+	 */
+	wmb();
+	ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
+		ASCCON_ROEN, port->membase + LTQ_ASC_CON);
+
+	retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
+		IRQF_DISABLED, "asc_tx", port);
+	if (retval) {
+		pr_err("failed to request lqasc_tx_int\n");
+		return retval;
+	}
+
+	retval = request_irq(ltq_port->rx_irq, lqasc_rx_int,
+		IRQF_DISABLED, "asc_rx", port);
+	if (retval) {
+		pr_err("failed to request lqasc_rx_int\n");
+		goto err1;
+	}
+
+	retval = request_irq(ltq_port->err_irq, lqasc_err_int,
+		IRQF_DISABLED, "asc_err", port);
+	if (retval) {
+		pr_err("failed to request lqasc_err_int\n");
+		goto err2;
+	}
+
+	ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
+		port->membase + LTQ_ASC_IRNREN);
+	return 0;
+
+err2:
+	free_irq(ltq_port->rx_irq, port);
+err1:
+	free_irq(ltq_port->tx_irq, port);
+	return retval;
+}
+
+static void
+lqasc_shutdown(struct uart_port *port)
+{
+	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+	free_irq(ltq_port->tx_irq, port);
+	free_irq(ltq_port->rx_irq, port);
+	free_irq(ltq_port->err_irq, port);
+
+	ltq_w32(0, port->membase + LTQ_ASC_CON);
+	ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
+		port->membase + LTQ_ASC_RXFCON);
+	ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
+		port->membase + LTQ_ASC_TXFCON);
+}
+
+static void
+lqasc_set_termios(struct uart_port *port,
+	struct ktermios *new, struct ktermios *old)
+{
+	unsigned int cflag;
+	unsigned int iflag;
+	unsigned int divisor;
+	unsigned int baud;
+	unsigned int con = 0;
+	unsigned long flags;
+
+	cflag = new->c_cflag;
+	iflag = new->c_iflag;
+
+	switch (cflag & CSIZE) {
+	case CS7:
+		con = ASCCON_M_7ASYNC;
+		break;
+
+	case CS5:
+	case CS6:
+	default:
+		new->c_cflag &= ~ CSIZE;
+		new->c_cflag |= CS8;
+		con = ASCCON_M_8ASYNC;
+		break;
+	}
+
+	cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+	if (cflag & CSTOPB)
+		con |= ASCCON_STP;
+
+	if (cflag & PARENB) {
+		if (!(cflag & PARODD))
+			con &= ~ASCCON_ODD;
+		else
+			con |= ASCCON_ODD;
+	}
+
+	port->read_status_mask = ASCSTATE_ROE;
+	if (iflag & INPCK)
+		port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+	port->ignore_status_mask = 0;
+	if (iflag & IGNPAR)
+		port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+	if (iflag & IGNBRK) {
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (iflag & IGNPAR)
+			port->ignore_status_mask |= ASCSTATE_ROE;
+	}
+
+	if ((cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_UER_RX;
+
+	/* set error signals  - framing, parity  and overrun, enable receiver */
+	con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
+
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+
+	/* set up CON */
+	ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON);
+
+	/* Set baud rate - take a divider of 2 into account */
+	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+	divisor = uart_get_divisor(port, baud);
+	divisor = divisor / 2 - 1;
+
+	/* disable the baudrate generator */
+	ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
+
+	/* make sure the fractional divider is off */
+	ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
+
+	/* set up to use divisor of 2 */
+	ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
+
+	/* now we can write the new baudrate into the register */
+	ltq_w32(divisor, port->membase + LTQ_ASC_BG);
+
+	/* turn the baudrate generator back on */
+	ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON);
+
+	/* enable rx */
+	ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
+
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+
+	/* Don't rewrite B0 */
+        if (tty_termios_baud_rate(new))
+		tty_termios_encode_baud_rate(new, baud, baud);
+}
+
+static const char*
+lqasc_type(struct uart_port *port)
+{
+	if (port->type == PORT_LTQ_ASC)
+		return DRVNAME;
+	else
+		return NULL;
+}
+
+static void
+lqasc_release_port(struct uart_port *port)
+{
+	if (port->flags & UPF_IOREMAP) {
+		iounmap(port->membase);
+		port->membase = NULL;
+	}
+}
+
+static int
+lqasc_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *res;
+	int size;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory region");
+		return -ENODEV;
+	}
+	size = resource_size(res);
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		size, dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory region");
+		return -EBUSY;
+	}
+
+	if (port->flags & UPF_IOREMAP) {
+		port->membase = devm_ioremap_nocache(&pdev->dev,
+			port->mapbase, size);
+		if (port->membase == NULL)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+static void
+lqasc_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_LTQ_ASC;
+		lqasc_request_port(port);
+	}
+}
+
+static int
+lqasc_verify_port(struct uart_port *port,
+	struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops lqasc_pops = {
+	.tx_empty =	lqasc_tx_empty,
+	.set_mctrl =	lqasc_set_mctrl,
+	.get_mctrl =	lqasc_get_mctrl,
+	.stop_tx =	lqasc_stop_tx,
+	.start_tx =	lqasc_start_tx,
+	.stop_rx =	lqasc_stop_rx,
+	.enable_ms =	lqasc_enable_ms,
+	.break_ctl =	lqasc_break_ctl,
+	.startup =	lqasc_startup,
+	.shutdown =	lqasc_shutdown,
+	.set_termios =	lqasc_set_termios,
+	.type =		lqasc_type,
+	.release_port =	lqasc_release_port,
+	.request_port =	lqasc_request_port,
+	.config_port =	lqasc_config_port,
+	.verify_port =	lqasc_verify_port,
+};
+
+static void
+lqasc_console_putchar(struct uart_port *port, int ch)
+{
+	int fifofree;
+
+	if (!port->membase)
+		return;
+
+	do {
+		fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT)
+			& ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
+	} while (fifofree == 0);
+	ltq_w8(ch, port->membase + LTQ_ASC_TBUF);
+}
+
+
+static void
+lqasc_console_write(struct console *co, const char *s, u_int count)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	unsigned long flags;
+
+	if (co->index >= MAXPORTS)
+		return;
+
+	ltq_port = lqasc_port[co->index];
+	if (!ltq_port)
+		return;
+
+	port = &ltq_port->port;
+
+	spin_lock_irqsave(&ltq_asc_lock, flags);
+	uart_console_write(port, s, count, lqasc_console_putchar);
+	spin_unlock_irqrestore(&ltq_asc_lock, flags);
+}
+
+static int __init
+lqasc_console_setup(struct console *co, char *options)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index >= MAXPORTS)
+		return -ENODEV;
+
+	ltq_port = lqasc_port[co->index];
+	if (!ltq_port)
+		return -ENODEV;
+
+	port = &ltq_port->port;
+
+	port->uartclk = clk_get_rate(ltq_port->clk);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console lqasc_console = {
+	.name =		"ttyLTQ",
+	.write =	lqasc_console_write,
+	.device =	uart_console_device,
+	.setup =	lqasc_console_setup,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+	.data =		&lqasc_reg,
+};
+
+static int __init
+lqasc_console_init(void)
+{
+	register_console(&lqasc_console);
+	return 0;
+}
+console_initcall(lqasc_console_init);
+
+static struct uart_driver lqasc_reg = {
+	.owner =	THIS_MODULE,
+	.driver_name =	DRVNAME,
+	.dev_name =	"ttyLTQ",
+	.major =	0,
+	.minor =	0,
+	.nr =		MAXPORTS,
+	.cons =		&lqasc_console,
+};
+
+static int __init
+lqasc_probe(struct platform_device *pdev)
+{
+	struct ltq_uart_port *ltq_port;
+	struct uart_port *port;
+	struct resource *mmres, *irqres;
+	int tx_irq, rx_irq, err_irq;
+	struct clk *clk;
+	int ret;
+
+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!mmres || !irqres)
+		return -ENODEV;
+
+	if (pdev->id >= MAXPORTS)
+		return -EBUSY;
+
+	if (lqasc_port[pdev->id] != NULL)
+		return -EBUSY;
+
+	clk = clk_get(&pdev->dev, "fpi");
+	if (IS_ERR(clk)) {
+		pr_err("failed to get fpi clk\n");
+		return -ENOENT;
+	}
+
+	tx_irq = platform_get_irq_byname(pdev, "tx");
+	rx_irq = platform_get_irq_byname(pdev, "rx");
+	err_irq = platform_get_irq_byname(pdev, "err");
+	if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0))
+		return -ENODEV;
+
+	ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL);
+	if (!ltq_port)
+		return -ENOMEM;
+
+	port = &ltq_port->port;
+
+	port->iotype	= SERIAL_IO_MEM;
+	port->flags	= ASYNC_BOOT_AUTOCONF | UPF_IOREMAP;
+	port->ops	= &lqasc_pops;
+	port->fifosize	= 16;
+	port->type	= PORT_LTQ_ASC,
+	port->line	= pdev->id;
+	port->dev	= &pdev->dev;
+
+	port->irq	= tx_irq; /* unused, just to be backward-compatibe */
+	port->mapbase	= mmres->start;
+
+	ltq_port->clk	= clk;
+
+	ltq_port->tx_irq = tx_irq;
+	ltq_port->rx_irq = rx_irq;
+	ltq_port->err_irq = err_irq;
+
+	lqasc_port[pdev->id] = ltq_port;
+	platform_set_drvdata(pdev, ltq_port);
+
+	ret = uart_add_one_port(&lqasc_reg, port);
+
+	return ret;
+}
+
+static struct platform_driver lqasc_driver = {
+	.driver		= {
+		.name	= DRVNAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+int __init
+init_lqasc(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&lqasc_reg);
+	if (ret != 0)
+		return ret;
+
+	ret = platform_driver_probe(&lqasc_driver, lqasc_probe);
+	if (ret != 0)
+		uart_unregister_driver(&lqasc_reg);
+
+	return ret;
+}
+
+module_init(init_lqasc);
+
+MODULE_DESCRIPTION("Lantiq serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/max3107.h b/drivers/tty/serial/max3107.h
index 7ab63239250..8415fc723b9 100644
--- a/drivers/tty/serial/max3107.h
+++ b/drivers/tty/serial/max3107.h
@@ -369,7 +369,7 @@ struct max3107_port {
 	struct spi_device *spi;
 
 #if defined(CONFIG_GPIOLIB)
-	/* GPIO chip stucture */
+	/* GPIO chip structure */
 	struct gpio_chip chip;
 #endif
 
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 37e13c3d91d..2f548af4e98 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
  *    1 word. If SPI master controller doesn't support sclk frequency change,
  *    then the char need be sent out one by one with some delay
  *
- * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrrupt is used, no need for waiting TXE
  *    interrupt for a low speed UART device
  */
 
diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h
index d1ef43af397..c37ea48c825 100644
--- a/drivers/tty/serial/mrst_max3110.h
+++ b/drivers/tty/serial/mrst_max3110.h
@@ -21,7 +21,7 @@
 
 #define WC_IRQ_MASK		(0xF << 8)
 #define WC_TXE_IRQ_ENABLE	(1 << 11)	/* TX empty irq */
-#define WC_RXA_IRQ_ENABLE	(1 << 10)	/* RX availabe irq */
+#define WC_RXA_IRQ_ENABLE	(1 << 10)	/* RX available irq */
 #define WC_PAR_HIGH_IRQ_ENABLE	(1 << 9)
 #define WC_REC_ACT_IRQ_ENABLE	(1 << 8)
 
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index b906f11f7c1..624701f8138 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -495,7 +495,7 @@ static void msm_hs_pm(struct uart_port *uport, unsigned int state,
  *
  * Interrupts should be disabled before we are called, as
  * we modify Set Baud rate
- * Set receive stale interrupt level, dependant on Bit Rate
+ * Set receive stale interrupt level, dependent on Bit Rate
  * Goal is to have around 8 ms before indicate stale.
  * roundup (((Bit Rate * .008) / 10) + 1
  */
@@ -1350,7 +1350,7 @@ static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev)
 
 	spin_lock_irqsave(&uport->lock, flags);
 	if (msm_uport->clk_state == MSM_HS_CLK_OFF) {
-		/* ignore the first irq - it is a pending irq that occured
+		/* ignore the first irq - it is a pending irq that occurred
 		 * before enable_irq() */
 		if (msm_uport->rx_wakeup.ignore)
 			msm_uport->rx_wakeup.ignore = 0;
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 0e8eec516df..c911b2419ab 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -80,14 +80,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 /*
  * Try to register a serial port
  */
+static struct of_device_id of_platform_serial_table[];
 static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
 {
+	const struct of_device_id *match;
 	struct of_serial_info *info;
 	struct uart_port port;
 	int port_type;
 	int ret;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(of_platform_serial_table, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
 
 	if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
@@ -97,7 +100,7 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
 	if (info == NULL)
 		return -ENOMEM;
 
-	port_type = (unsigned long)ofdev->dev.of_match->data;
+	port_type = (unsigned long)match->data;
 	ret = of_platform_serial_setup(ofdev, port_type, &port);
 	if (ret)
 		goto out;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 763537943a5..47cadf47414 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -13,7 +13,7 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
- * Note: This driver is made seperate from 8250 driver as we cannot
+ * Note: This driver is made separate from 8250 driver as we cannot
  * over load 8250 driver with omap platform specific configuration for
  * features like DMA, it makes easier to implement features like DMA and
  * hardware flow control and software flow control configuration with
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 5b9cde79e4e..e1c8d4f1ce5 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -330,7 +330,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
 		 * When that happens, I disable the receive side of the driver.
 		 * Note that what I've been experiencing is a real irq loop where
 		 * I'm getting flooded regardless of the actual port speed.
-		 * Something stange is going on with the HW
+		 * Something strange is going on with the HW
 		 */
 		if ((++loops) > 1000)
 			goto flood;
@@ -396,7 +396,7 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
 		 * be nice to transmit console writes just like we normally would for
 		 * a TTY line. (ie. buffered and TX interrupt driven).  That is not
 		 * easy because console writes cannot sleep.  One solution might be
-		 * to poll on enough port->xmit space becomming free.  -DaveM
+		 * to poll on enough port->xmit space becoming free.  -DaveM
 		 */
 		if (!(status & Tx_BUF_EMP))
 			return;
@@ -809,7 +809,7 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
 #endif /* !CONFIG_PPC_PMAC */
 
 /*
- * FixZeroBug....Works around a bug in the SCC receving channel.
+ * FixZeroBug....Works around a bug in the SCC receiving channel.
  * Inspired from Darwin code, 15 Sept. 2000  -DanM
  *
  * The following sequence prevents a problem that is seen with O'Hare ASICs
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 2335edafe90..9e2fa8d784e 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -64,7 +64,7 @@
 #define tx_enabled(port) ((port)->unused[0])
 #define rx_enabled(port) ((port)->unused[1])
 
-/* flag to ignore all characters comming in */
+/* flag to ignore all characters coming in */
 #define RXSTAT_DUMMY_READ (0x10000000)
 
 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
@@ -291,7 +291,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 		goto out;
 	}
 
-	/* if there isnt anything more to transmit, or the uart is now
+	/* if there isn't anything more to transmit, or the uart is now
 	 * stopped, disable the uart and exit
 	*/
 
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index eb7958c675a..920a6f929c8 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -812,7 +812,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 }
 
 /*
- * Here we define a transistion notifier so that we can update all of our
+ * Here we define a transition notifier so that we can update all of our
  * ports' baud rate when the peripheral clock changes.
  */
 static int sci_notifier(struct notifier_block *self,
@@ -1836,6 +1836,12 @@ static int __devinit serial_console_setup(struct console *co, char *options)
 	sci_port = &sci_ports[co->index];
 	port = &sci_port->port;
 
+	/*
+	 * Refuse to handle uninitialized ports.
+	 */
+	if (!port->ops)
+		return -ENODEV;
+
 	ret = sci_remap_port(port);
 	if (unlikely(ret != 0))
 		return ret;
@@ -1866,13 +1872,6 @@ static struct console serial_console = {
 	.data		= &sci_uart_driver,
 };
 
-static int __init sci_console_init(void)
-{
-	register_console(&serial_console);
-	return 0;
-}
-console_initcall(sci_console_init);
-
 static struct console early_serial_console = {
 	.name           = "early_ttySC",
 	.write          = serial_console_write,
@@ -1901,18 +1900,18 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
 	register_console(&early_serial_console);
 	return 0;
 }
+
+#define SCI_CONSOLE	(&serial_console)
+
 #else
 static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
 {
 	return -EINVAL;
 }
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
-#define SCI_CONSOLE	(&serial_console)
-#else
-#define SCI_CONSOLE	0
-#endif
+#define SCI_CONSOLE	NULL
+
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 static char banner[] __initdata =
 	KERN_INFO "SuperH SCI(F) driver initialized\n";
diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c
index cff9a306660..377ae74e715 100644
--- a/drivers/tty/serial/sn_console.c
+++ b/drivers/tty/serial/sn_console.c
@@ -146,7 +146,7 @@ static struct sn_sal_ops intr_ops = {
 };
 
 /* the console does output in two distinctly different ways:
- * synchronous (raw) and asynchronous (buffered).  initally, early_printk
+ * synchronous (raw) and asynchronous (buffered).  initially, early_printk
  * does synchronous output.  any data written goes directly to the SAL
  * to be output (incidentally, it is internally buffered by the SAL)
  * after interrupts and timers are initialized and available for use,
@@ -481,7 +481,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
 	while (port->sc_ops->sal_input_pending()) {
 		ch = port->sc_ops->sal_getc();
 		if (ch < 0) {
-			printk(KERN_ERR "sn_console: An error occured while "
+			printk(KERN_ERR "sn_console: An error occurred while "
 			       "obtaining data from the console (0x%0x)\n", ch);
 			break;
 		}
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 99ff9abf57c..8e916e76b7b 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -474,7 +474,7 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
 		 * be nice to transmit console writes just like we normally would for
 		 * a TTY line. (ie. buffered and TX interrupt driven).  That is not
 		 * easy because console writes cannot sleep.  One solution might be
-		 * to poll on enough port->xmit space becomming free.  -DaveM
+		 * to poll on enough port->xmit space becoming free.  -DaveM
 		 */
 		if (!(status & Tx_BUF_EMP))
 			return;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 18888d005a0..27da23d98e3 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -4072,7 +4072,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
 	
 	if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
 		info->device_name, info ) < 0 ) {
-		printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
+		printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n",
 			__FILE__,__LINE__,info->device_name, info->irq_level );
 		goto errout;
 	}
@@ -4095,7 +4095,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
 		info->memory_base = ioremap_nocache(info->phys_memory_base,
 								0x40000);
 		if (!info->memory_base) {
-			printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
+			printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n",
 				__FILE__,__LINE__,info->device_name, info->phys_memory_base );
 			goto errout;
 		}
@@ -4109,7 +4109,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
 		info->lcr_base = ioremap_nocache(info->phys_lcr_base,
 								PAGE_SIZE);
 		if (!info->lcr_base) {
-			printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
+			printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n",
 				__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
 			goto errout;
 		}
@@ -4119,7 +4119,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
 		/* claim DMA channel */
 		
 		if (request_dma(info->dma_level,info->device_name) < 0){
-			printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
+			printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n",
 				__FILE__,__LINE__,info->device_name, info->dma_level );
 			mgsl_release_resources( info );
 			return -ENODEV;
@@ -4132,7 +4132,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
 	}
 	
 	if ( mgsl_allocate_dma_buffers(info) < 0 ) {
-		printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
+		printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n",
 			__FILE__,__LINE__,info->device_name, info->dma_level );
 		goto errout;
 	}	
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index a35dd549a00..18b48cd3b41 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -3491,7 +3491,7 @@ static int claim_resources(struct slgt_info *info)
 
 	info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
 	if (!info->reg_addr) {
-		DBGERR(("%s cant map device registers, addr=%08X\n",
+		DBGERR(("%s can't map device registers, addr=%08X\n",
 			info->device_name, info->phys_reg_addr));
 		info->init_error = DiagStatus_CantAssignPciResources;
 		goto errout;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 32734369447..c77831c7675 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -3595,7 +3595,7 @@ static int claim_resources(SLMP_INFO *info)
 	info->memory_base = ioremap_nocache(info->phys_memory_base,
 								SCA_MEM_SIZE);
 	if (!info->memory_base) {
-		printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
+		printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
 			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
 		info->init_error = DiagStatus_CantAssignPciResources;
 		goto errout;
@@ -3603,7 +3603,7 @@ static int claim_resources(SLMP_INFO *info)
 
 	info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
 	if (!info->lcr_base) {
-		printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
+		printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
 			__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
 		info->init_error = DiagStatus_CantAssignPciResources;
 		goto errout;
@@ -3612,7 +3612,7 @@ static int claim_resources(SLMP_INFO *info)
 
 	info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
 	if (!info->sca_base) {
-		printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
+		printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
 			__FILE__,__LINE__,info->device_name, info->phys_sca_base );
 		info->init_error = DiagStatus_CantAssignPciResources;
 		goto errout;
@@ -3622,7 +3622,7 @@ static int claim_resources(SLMP_INFO *info)
 	info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
 								PAGE_SIZE);
 	if (!info->statctrl_base) {
-		printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
+		printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
 			__FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
 		info->init_error = DiagStatus_CantAssignPciResources;
 		goto errout;
@@ -3869,7 +3869,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
 					port_array[0]->irq_flags,
 					port_array[0]->device_name,
 					port_array[0]) < 0 ) {
-			printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
+			printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
 				__FILE__,__LINE__,
 				port_array[0]->device_name,
 				port_array[0]->irq_level );
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index b9451219528..f1a7918d71a 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -442,10 +442,8 @@ static void flush_to_ldisc(struct work_struct *work)
 			   line discipline as we want to empty the queue */
 			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
 				break;
-			if (!tty->receive_room || seen_tail) {
-				schedule_work(&tty->buf.work);
+			if (!tty->receive_room || seen_tail)
 				break;
-			}
 			if (count > tty->receive_room)
 				count = tty->receive_room;
 			char_buf = head->char_buf_ptr + head->read;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 936a4ead6c2..d7d50b48287 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2134,7 +2134,7 @@ done:
  *	actually has driver level meaning and triggers a VC resize.
  *
  *	Locking:
- *		Driver dependant. The default do_resize method takes the
+ *		Driver dependent. The default do_resize method takes the
  *	tty termios mutex and ctrl_lock. The console takes its own lock
  *	then calls into the default method.
  */
@@ -2155,7 +2155,7 @@ static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
  *	tioccons	-	allow admin to move logical console
  *	@file: the file to become console
  *
- *	Allow the adminstrator to move the redirected console device
+ *	Allow the administrator to move the redirected console device
  *
  *	Locking: uses redirect_lock to guard the redirect information
  */
@@ -2290,7 +2290,7 @@ EXPORT_SYMBOL_GPL(tty_get_pgrp);
 /**
  *	tiocgpgrp		-	get process group
  *	@tty: tty passed by user
- *	@real_tty: tty side of the tty pased by the user if a pty else the tty
+ *	@real_tty: tty side of the tty passed by the user if a pty else the tty
  *	@p: returned pid
  *
  *	Obtain the process group of the tty. If there is no process group
@@ -2367,7 +2367,7 @@ out_unlock:
 /**
  *	tiocgsid		-	get session id
  *	@tty: tty passed by user
- *	@real_tty: tty side of the tty pased by the user if a pty else the tty
+ *	@real_tty: tty side of the tty passed by the user if a pty else the tty
  *	@p: pointer to returned session id
  *
  *	Obtain the session id of the tty. If there is no session
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 1a1135d580a..21574cb3234 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -247,7 +247,7 @@ speed_t tty_termios_baud_rate(struct ktermios *termios)
 	cbaud = termios->c_cflag & CBAUD;
 
 #ifdef BOTHER
-	/* Magic token for arbitary speed via c_ispeed/c_ospeed */
+	/* Magic token for arbitrary speed via c_ispeed/c_ospeed */
 	if (cbaud == BOTHER)
 		return termios->c_ospeed;
 #endif
@@ -283,7 +283,7 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios)
 	if (cbaud == B0)
 		return tty_termios_baud_rate(termios);
 
-	/* Magic token for arbitary speed via c_ispeed*/
+	/* Magic token for arbitrary speed via c_ispeed*/
 	if (cbaud == BOTHER)
 		return termios->c_ispeed;
 
@@ -449,7 +449,7 @@ EXPORT_SYMBOL(tty_get_baud_rate);
  *	@new: New termios
  *	@old: Old termios
  *
- *	Propogate the hardware specific terminal setting bits from
+ *	Propagate the hardware specific terminal setting bits from
  *	the old termios structure to the new one. This is used in cases
  *	where the hardware does not support reconfiguration or as a helper
  *	in some cases where only minimal reconfiguration is supported
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index c83cdfb56fc..4bea1efaec9 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3963,7 +3963,7 @@ void reset_palette(struct vc_data *vc)
  *  of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints, 
  *  depending on width) reserved for each character which is kinda wasty, but 
  *  this is done in order to maintain compatibility with the EGA/VGA fonts. It 
- *  is upto the actual low-level console-driver convert data into its favorite
+ *  is up to the actual low-level console-driver convert data into its favorite
  *  format (maybe we should add a `fontoffset' field to the `display'
  *  structure so we won't have to convert the fontdata all the time.
  *  /Jes
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 51fe1795d5a..d2efe823c20 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -381,7 +381,13 @@ static int uio_get_minor(struct uio_device *idev)
 			retval = -ENOMEM;
 		goto exit;
 	}
-	idev->minor = id & MAX_ID_MASK;
+	if (id < UIO_MAX_DEVICES) {
+		idev->minor = id;
+	} else {
+		dev_err(idev->dev, "too many uio devices\n");
+		retval = -EINVAL;
+		idr_remove(&uio_idr, id);
+	}
 exit:
 	mutex_unlock(&minor_lock);
 	return retval;
@@ -587,14 +593,12 @@ static ssize_t uio_write(struct file *filep, const char __user *buf,
 
 static int uio_find_mem_index(struct vm_area_struct *vma)
 {
-	int mi;
 	struct uio_device *idev = vma->vm_private_data;
 
-	for (mi = 0; mi < MAX_UIO_MAPS; mi++) {
-		if (idev->info->mem[mi].size == 0)
+	if (vma->vm_pgoff < MAX_UIO_MAPS) {
+		if (idev->info->mem[vma->vm_pgoff].size == 0)
 			return -1;
-		if (vma->vm_pgoff == mi)
-			return mi;
+		return (int)vma->vm_pgoff;
 	}
 	return -1;
 }
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
index 5ffdb483b01..a879fd5741f 100644
--- a/drivers/uio/uio_netx.c
+++ b/drivers/uio/uio_netx.c
@@ -18,6 +18,9 @@
 
 #define PCI_VENDOR_ID_HILSCHER		0x15CF
 #define PCI_DEVICE_ID_HILSCHER_NETX	0x0000
+#define PCI_DEVICE_ID_HILSCHER_NETPLC	0x0010
+#define PCI_SUBDEVICE_ID_NETPLC_RAM	0x0000
+#define PCI_SUBDEVICE_ID_NETPLC_FLASH	0x0001
 #define PCI_SUBDEVICE_ID_NXSB_PCA	0x3235
 #define PCI_SUBDEVICE_ID_NXPCA		0x3335
 
@@ -66,6 +69,10 @@ static int __devinit netx_pci_probe(struct pci_dev *dev,
 		bar = 0;
 		info->name = "netx";
 		break;
+	case PCI_DEVICE_ID_HILSCHER_NETPLC:
+		bar = 0;
+		info->name = "netplc";
+		break;
 	default:
 		bar = 2;
 		info->name = "netx_plx";
@@ -134,6 +141,18 @@ static struct pci_device_id netx_pci_ids[] = {
 		.subdevice =	0,
 	},
 	{
+		.vendor =       PCI_VENDOR_ID_HILSCHER,
+		.device =       PCI_DEVICE_ID_HILSCHER_NETPLC,
+		.subvendor =    PCI_VENDOR_ID_HILSCHER,
+		.subdevice =    PCI_SUBDEVICE_ID_NETPLC_RAM,
+	},
+	{
+		.vendor =       PCI_VENDOR_ID_HILSCHER,
+		.device =       PCI_DEVICE_ID_HILSCHER_NETPLC,
+		.subvendor =    PCI_VENDOR_ID_HILSCHER,
+		.subdevice =    PCI_SUBDEVICE_ID_NETPLC_FLASH,
+	},
+	{
 		.vendor =	PCI_VENDOR_ID_PLX,
 		.device =	PCI_DEVICE_ID_PLX_9030,
 		.subvendor =	PCI_VENDOR_ID_PLX,
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 7174d518b8a..0f424af7f10 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -189,6 +189,10 @@ static int uio_pdrv_genirq_remove(struct platform_device *pdev)
 
 	uio_unregister_device(priv->uioinfo);
 	pm_runtime_disable(&pdev->dev);
+
+	priv->uioinfo->handler = NULL;
+	priv->uioinfo->irqcontrol = NULL;
+
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c
index daf6e77de2b..e67b566e7aa 100644
--- a/drivers/uio/uio_pruss.c
+++ b/drivers/uio/uio_pruss.c
@@ -39,7 +39,7 @@ module_param(extram_pool_sz, int, 0);
 MODULE_PARM_DESC(extram_pool_sz, "external ram pool size to allocate");
 
 /*
- * Host event IRQ numbers from PRUSS - PRUSS can generate upto 8 interrupt
+ * Host event IRQ numbers from PRUSS - PRUSS can generate up to 8 interrupt
  * events to AINTC of ARM host processor - which can be used for IPC b/w PRUSS
  * firmware and user space application, async notification from PRU firmware
  * to user space application
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 41b6e51188e..006489d82dc 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -66,6 +66,7 @@ config USB_ARCH_HAS_EHCI
 	default y if ARCH_VT8500
 	default y if PLAT_SPEAR
 	default y if ARCH_MSM
+	default y if MICROBLAZE
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index b268e9fccb4..e71521ce301 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1283,7 +1283,7 @@ static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
 
 	/* in bulk mode the modem have problem with high rate
 	 * changing internal timing could improve things, but the
-	 * value is misterious.
+	 * value is mysterious.
 	 * ADI930 don't support it (-EPIPE error).
 	 */
 
@@ -1743,7 +1743,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
 				goto out;
 		}
 	} else {
-		/* This realy should not happen */
+		/* This really should not happen */
 		uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
 		goto out;
 	}
@@ -1798,7 +1798,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
 				goto out;
 		}
 	} else {
-		/* This realy should not happen */
+		/* This really should not happen */
 		uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
 		goto out;
 	}
@@ -1829,7 +1829,7 @@ static int uea_start_reset(struct uea_softc *sc)
 
 	/* mask interrupt */
 	sc->booting = 1;
-	/* We need to set this here because, a ack timeout could have occured,
+	/* We need to set this here because, a ack timeout could have occurred,
 	 * but before we start the reboot, the ack occurs and set this to 1.
 	 * So we will failed to wait Ready CMV.
 	 */
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index b6d49234e52..62050f7a4f9 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -27,7 +27,7 @@
  * the link between the common hardware parts and the subdrivers (e.g.
  * interrupt handling).
  *
- * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * The c67x00 has 2 SIE's (serial interface engine) which can be configured
  * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
  *
  * Depending on the platform configuration, the SIE's are created and
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
index 74e44621e31..e3d493d4d61 100644
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -34,7 +34,7 @@
 /*
  * The following parameters depend on the CPU speed, bus speed, ...
  * These can be tuned for specific use cases, e.g. if isochronous transfers
- * are very important, bandwith can be sacrificed to guarantee that the
+ * are very important, bandwidth can be sacrificed to guarantee that the
  * 1ms deadline will be met.
  * If bulk transfers are important, the MAX_FRAME_BW can be increased,
  * but some (or many) isochronous deadlines might not be met.
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index f6b3c253f3f..a03fbc15fa9 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -907,7 +907,7 @@ static inline int c67x00_end_of_data(struct c67x00_td *td)
 
 /* Remove all td's from the list which come
  * after last_td and are meant for the same pipe.
- * This is used when a short packet has occured */
+ * This is used when a short packet has occurred */
 static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
 				     struct c67x00_td *last_td)
 {
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 5eeb570b9a6..b4ea54dbf32 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -52,7 +52,7 @@
  */
 
 /*
- * The only reason to have several buffers is to accomodate assumptions
+ * The only reason to have several buffers is to accommodate assumptions
  * in line disciplines. They ask for empty space amount, receive our URB size,
  * and proceed to issue several 1-character writes, assuming they will fit.
  * The very first write takes a complete URB. Fortunately, this only happens
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 6a54634ab82..385acb895ab 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -483,7 +483,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
 		}
 
 		done += n_characters;
-		/* Terminate if end-of-message bit recieved from device */
+		/* Terminate if end-of-message bit received from device */
 		if ((buffer[8] &  0x01) && (actual >= n_characters + 12))
 			remaining = 0;
 		else
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index a3d2e239965..96fdfb815f8 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -221,7 +221,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 		break;
 	case USB_ENDPOINT_XFER_INT:
 		type = "Int.";
-		if (speed == USB_SPEED_HIGH)
+		if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER)
 			interval = 1 << (desc->bInterval - 1);
 		else
 			interval = desc->bInterval;
@@ -229,7 +229,8 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 	default:	/* "can't happen" */
 		return start;
 	}
-	interval *= (speed == USB_SPEED_HIGH) ? 125 : 1000;
+	interval *= (speed == USB_SPEED_HIGH ||
+		     speed == USB_SPEED_SUPER) ? 125 : 1000;
 	if (interval % 1000)
 		unit = 'u';
 	else {
@@ -542,8 +543,9 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 	if (level == 0) {
 		int	max;
 
-		/* high speed reserves 80%, full/low reserves 90% */
-		if (usbdev->speed == USB_SPEED_HIGH)
+		/* super/high speed reserves 80%, full/low reserves 90% */
+		if (usbdev->speed == USB_SPEED_HIGH ||
+		    usbdev->speed == USB_SPEED_SUPER)
 			max = 800;
 		else
 			max = FRAME_TIME_MAX_USECS_ALLOC;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 02b4dbfa488..77a7faec8d7 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -700,7 +700,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 	/* The USB 2.0 spec says 256 ms.  This is close enough and won't
 	 * exceed that limit if HZ is 100. The math is more clunky than
 	 * maybe expected, this is to make sure that all timers for USB devices
-	 * fire at the same time to give the CPU a break inbetween */
+	 * fire at the same time to give the CPU a break in between */
 	if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
 			(length == 0 && hcd->status_urb != NULL))
 		mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
@@ -1908,7 +1908,7 @@ void usb_free_streams(struct usb_interface *interface,
 
 	/* Streams only apply to bulk endpoints. */
 	for (i = 0; i < num_eps; i++)
-		if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
+		if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc))
 			return;
 
 	hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 564eaa5525d..93720bdc9ef 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1649,7 +1649,7 @@ void usb_disconnect(struct usb_device **pdev)
 
 	/* mark the device as inactive, so any further urb submissions for
 	 * this device (and any of its children) will fail immediately.
-	 * this quiesces everyting except pending urbs.
+	 * this quiesces everything except pending urbs.
 	 */
 	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
 	dev_info(&udev->dev, "USB disconnect, device number %d\n",
@@ -2285,7 +2285,17 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	}
 
 	/* see 7.1.7.6 */
-	status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
+	/* Clear PORT_POWER if it's a USB3.0 device connected to USB 3.0
+	 * external hub.
+	 * FIXME: this is a temporary workaround to make the system able
+	 * to suspend/resume.
+	 */
+	if ((hub->hdev->parent != NULL) && hub_is_superspeed(hub->hdev))
+		status = clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_POWER);
+	else
+		status = set_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_SUSPEND);
 	if (status) {
 		dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
 				port1, status);
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 0bc06e2bcfc..a6a350f5827 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -648,7 +648,7 @@ static int ehci_reset_port(int port)
 		if (!(portsc & PORT_CONNECT))
 			return -ENOTCONN;
 
-		/* bomb out completely if something weird happend */
+		/* bomb out completely if something weird happened */
 		if ((portsc & PORT_CSC))
 			return -EINVAL;
 
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index f8dd7269d79..6e42aab7580 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev)
 	return 0;
 }
 
-/* Calculates fifo start of endpoint based on preceeding endpoints */
+/* Calculates fifo start of endpoint based on preceding endpoints */
 static int udc_set_txfifo_addr(struct udc_ep *ep)
 {
 	struct udc	*dev;
@@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
 	if (use_dma) {
 		/* BNA event ? */
 		if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
-			DBG(dev, "BNA ep%dout occured - DESPTR = %x \n",
+			DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n",
 					ep->num, readl(&ep->regs->desptr));
 			/* clear BNA */
 			writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
@@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
 	}
 	/* HE event ? */
 	if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
-		dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num);
+		dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num);
 
 		/* clear HE */
 		writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
@@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 		/* BNA ? */
 		if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
 			dev_err(&dev->pdev->dev,
-				"BNA ep%din occured - DESPTR = %08lx \n",
+				"BNA ep%din occurred - DESPTR = %08lx \n",
 				ep->num,
 				(unsigned long) readl(&ep->regs->desptr));
 
@@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 	/* HE event ? */
 	if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
 		dev_err(&dev->pdev->dev,
-			"HE ep%dn occured - DESPTR = %08lx \n",
+			"HE ep%dn occurred - DESPTR = %08lx \n",
 			ep->num, (unsigned long) readl(&ep->regs->desptr));
 
 		/* clear HE */
@@ -2384,7 +2384,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 			req = list_entry(ep->queue.next,
 					struct udc_request, queue);
 			/*
-			 * length bytes transfered
+			 * length bytes transferred
 			 * check dma done of last desc. in PPBDU mode
 			 */
 			if (use_dma_ppb_du) {
@@ -2784,7 +2784,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev)
 					/* write fifo */
 					udc_txfifo_write(ep, &req->req);
 
-					/* lengh bytes transfered */
+					/* lengh bytes transferred */
 					len = req->req.length - req->req.actual;
 					if (len > ep->ep.maxpacket)
 						len = ep->ep.maxpacket;
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 4bbabbbfc93..1d1c7543468 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -584,7 +584,7 @@ union udc_setup_data {
  * SET and GET bitfields in u32 values
  * via constants for mask/offset:
  * <bit_field_stub_name> is the text between
- * UDC_ and _MASK|_OFS of appropiate
+ * UDC_ and _MASK|_OFS of appropriate
  * constant
  *
  * set bitfield value in u32 u32Val
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index bb8ddf0469f..9b7cdb16f26 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -826,7 +826,7 @@ done:
 	return status;
 }
 
-/* reinit == restore inital software state */
+/* reinit == restore initial software state */
 static void udc_reinit(struct at91_udc *udc)
 {
 	u32 i;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c2251c40a20..82314ed2250 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -42,7 +42,7 @@
 static struct usb_composite_driver *composite;
 static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
 
-/* Some systems will need runtime overrides for the  product identifers
+/* Some systems will need runtime overrides for the  product identifiers
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
@@ -205,14 +205,14 @@ int usb_function_activate(struct usb_function *function)
  * usb_interface_id() is called from usb_function.bind() callbacks to
  * allocate new interface IDs.  The function driver will then store that
  * ID in interface, association, CDC union, and other descriptors.  It
- * will also handle any control requests targetted at that interface,
+ * will also handle any control requests targeted at that interface,
  * particularly changing its altsetting via set_alt().  There may
  * also be class-specific or vendor-specific requests to handle.
  *
  * All interface identifier should be allocated using this routine, to
  * ensure that for example different functions don't wrongly assign
  * different meanings to the same identifier.  Note that since interface
- * identifers are configuration-specific, functions used in more than
+ * identifiers are configuration-specific, functions used in more than
  * one configuration (or more than once in a given configuration) need
  * multiple versions of the relevant descriptors.
  *
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 00975ed903d..0111f8a9cf7 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -706,6 +706,7 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
 	struct f_audio		*audio = func_to_audio(f);
 
 	usb_free_descriptors(f->descriptors);
+	usb_free_descriptors(f->hs_descriptors);
 	kfree(audio);
 }
 
@@ -742,7 +743,7 @@ int __init control_selector_init(struct f_audio *audio)
 }
 
 /**
- * audio_bind_config - add USB audio fucntion to a configuration
+ * audio_bind_config - add USB audio function to a configuration
  * @c: the configuration to supcard the USB audio function
  * Context: single threaded during gadget setup
  *
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 95dd4662d6a..b3c30429015 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -314,6 +314,9 @@ eem_unbind(struct usb_configuration *c, struct usb_function *f)
 
 static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
 {
+	struct sk_buff *skb = (struct sk_buff *)req->context;
+
+	dev_kfree_skb_any(skb);
 }
 
 /*
@@ -428,10 +431,11 @@ static int eem_unwrap(struct gether *port,
 				skb_trim(skb2, len);
 				put_unaligned_le16(BIT(15) | BIT(11) | len,
 							skb_push(skb2, 2));
-				skb_copy_bits(skb, 0, req->buf, skb->len);
-				req->length = skb->len;
+				skb_copy_bits(skb2, 0, req->buf, skb2->len);
+				req->length = skb2->len;
 				req->complete = eem_cmd_complete;
 				req->zero = 1;
+				req->context = skb2;
 				if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC))
 					DBG(cdev, "echo response queue fail\n");
 				break;
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 130eee678c8..86902a60bcd 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -111,7 +111,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g)
 #define NTB_OUT_SIZE		16384
 
 /*
- * skbs of size less than that will not be alligned
+ * skbs of size less than that will not be aligned
  * to NCM's dwNtbInMaxSize to save bus bandwidth
  */
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index aee7e3c53c3..3a68e09309f 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -1148,6 +1148,12 @@ static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame)
 static int txcomplete(struct qe_ep *ep, unsigned char restart)
 {
 	if (ep->tx_req != NULL) {
+		struct qe_req *req = ep->tx_req;
+		unsigned zlp = 0, last_len = 0;
+
+		last_len = min_t(unsigned, req->req.length - ep->sent,
+				ep->ep.maxpacket);
+
 		if (!restart) {
 			int asent = ep->last;
 			ep->sent += asent;
@@ -1156,9 +1162,18 @@ static int txcomplete(struct qe_ep *ep, unsigned char restart)
 			ep->last = 0;
 		}
 
+		/* zlp needed when req->re.zero is set */
+		if (req->req.zero) {
+			if (last_len == 0 ||
+				(req->req.length % ep->ep.maxpacket) != 0)
+				zlp = 0;
+			else
+				zlp = 1;
+		} else
+			zlp = 0;
+
 		/* a request already were transmitted completely */
-		if ((ep->tx_req->req.length - ep->sent) <= 0) {
-			ep->tx_req->req.actual = (unsigned int)ep->sent;
+		if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) {
 			done(ep, ep->tx_req, 0);
 			ep->tx_req = NULL;
 			ep->last = 0;
@@ -1191,6 +1206,7 @@ static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame)
 	buf = (u8 *)ep->tx_req->req.buf + ep->sent;
 	if (buf && size) {
 		ep->last = size;
+		ep->tx_req->req.actual += size;
 		frame_set_data(frame, buf);
 		frame_set_length(frame, size);
 		frame_set_status(frame, FRAME_OK);
@@ -2523,15 +2539,18 @@ static void qe_udc_release(struct device *dev)
 }
 
 /* Driver probe functions */
+static const struct of_device_id qe_udc_match[];
 static int __devinit qe_udc_probe(struct platform_device *ofdev)
 {
+	const struct of_device_id *match;
 	struct device_node *np = ofdev->dev.of_node;
 	struct qe_ep *ep;
 	unsigned int ret = 0;
 	unsigned int i;
 	const void *prop;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(qe_udc_match, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
 
 	prop = of_get_property(np, "mode", NULL);
@@ -2545,7 +2564,7 @@ static int __devinit qe_udc_probe(struct platform_device *ofdev)
 		return -ENOMEM;
 	}
 
-	udc_controller->soc_type = (unsigned long)ofdev->dev.of_match->data;
+	udc_controller->soc_type = (unsigned long)match->data;
 	udc_controller->usb_regs = of_iomap(np, 0);
 	if (!udc_controller->usb_regs) {
 		ret = -ENOMEM;
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index bea5b827beb..e35e24fd64b 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -208,14 +208,14 @@ struct qe_frame{
 /* Frame status field */
 /* Receive side */
 #define FRAME_OK               0x00000000 /* Frame tranmitted or received OK */
-#define FRAME_ERROR            0x80000000 /* Error occured on frame */
+#define FRAME_ERROR            0x80000000 /* Error occurred on frame */
 #define START_FRAME_LOST       0x40000000 /* START_FRAME_LOST */
 #define END_FRAME_LOST         0x20000000 /* END_FRAME_LOST */
 #define RX_ER_NONOCT           0x10000000 /* Rx Non Octet Aligned Packet */
 #define RX_ER_BITSTUFF         0x08000000 /* Frame Aborted --Received packet
 					     with bit stuff error */
 #define RX_ER_CRC              0x04000000 /* Received packet with CRC error */
-#define RX_ER_OVERUN           0x02000000 /* Over-run occured on reception */
+#define RX_ER_OVERUN           0x02000000 /* Over-run occurred on reception */
 #define RX_ER_PID              0x01000000 /* Wrong PID received */
 /* Tranmit side */
 #define TX_ER_NAK              0x00800000 /* Received NAK handshake */
@@ -379,7 +379,7 @@ struct qe_udc {
 #define T_LSP         0x01000000         /* Low-speed transaction */
 #define T_PID         0x00c00000         /* packet id */
 #define T_NAK         0x00100000         /* No ack. */
-#define T_STAL        0x00080000         /* Stall recieved */
+#define T_STAL        0x00080000         /* Stall received */
 #define T_TO          0x00040000         /* time out */
 #define T_UN          0x00020000         /* underrun */
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 912cb8e63fe..07499c1cdcc 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -464,7 +464,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 
 	max = le16_to_cpu(desc->wMaxPacketSize);
 
-	/* Disable automatic zlp generation.  Driver is reponsible to indicate
+	/* Disable automatic zlp generation.  Driver is responsible to indicate
 	 * explicitly through req->req.zero.  This is needed to enable multi-td
 	 * request. */
 	zlt = 1;
@@ -648,7 +648,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 			| EP_QUEUE_HEAD_STATUS_HALT));
 	dQH->size_ioc_int_sts &= temp;
 
-	/* Ensure that updates to the QH will occure before priming. */
+	/* Ensure that updates to the QH will occur before priming. */
 	wmb();
 
 	/* Prime endpoint by writing 1 to ENDPTPRIME */
@@ -1459,7 +1459,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
 				status = -EILSEQ;
 				break;
 			} else
-				ERR("Unknown error has occured (0x%x)!\n",
+				ERR("Unknown error has occurred (0x%x)!\n",
 					errors);
 
 		} else if (le32_to_cpu(curr_td->size_ioc_sts)
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 20aeceed48c..e88cce5c2c0 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -15,7 +15,7 @@ struct usb_dr_device {
 	u8 res1[256];
 	u16 caplength;		/* Capability Register Length */
 	u16 hciversion;		/* Host Controller Interface Version */
-	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
 	u32 hccparams;		/* Host Controller Capability Parameters */
 	u8 res2[20];
 	u32 dciversion;		/* Device Controller Interface Version */
@@ -52,7 +52,7 @@ struct usb_dr_host {
 	u8 res1[256];
 	u16 caplength;		/* Capability Register Length */
 	u16 hciversion;		/* Host Controller Interface Version */
-	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
 	u32 hccparams;		/* Host Controller Capability Parameters */
 	u8 res2[20];
 	u32 dciversion;		/* Device Controller Interface Version */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 0ab7e141d49..47b86b99d44 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -67,7 +67,7 @@ MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
 module_param(id, charp, 0444);
 MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 48a760220ba..bf6e11c758d 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -38,6 +38,7 @@
 #include <linux/device.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 5408186afc3..ade40066dec 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
+#include <linux/prefetch.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 3ed73f49cf1..a01383f71f3 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -386,8 +386,10 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 
 	/* halt any endpoint by doing a "wrong direction" i/o call */
 	if (usb_endpoint_dir_in(&data->desc)) {
-		if (usb_endpoint_xfer_isoc(&data->desc))
+		if (usb_endpoint_xfer_isoc(&data->desc)) {
+			mutex_unlock(&data->lock);
 			return -EINVAL;
+		}
 		DBG (data->dev, "%s halt\n", data->name);
 		spin_lock_irq (&data->dev->lock);
 		if (likely (data->ep != NULL))
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 1eca8b47ce3..9cee88a43a7 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -642,7 +642,7 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
 	dqh->dtd_status &= dtd_status;
 	dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
 
-	/* ensure that updates to the dQH will occure before priming */
+	/* ensure that updates to the dQH will occur before priming */
 	wmb();
 
 	/* write 1 to endptprime register to PRIME endpoint */
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index d5468a7f38e..b62b2640deb 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -325,7 +325,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 
 			/*
 			 * Ensure that updates to the QH will
-			 * occure before priming.
+			 * occur before priming.
 			 */
 			wmb();
 
@@ -338,7 +338,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
 		dqh->size_ioc_int_sts = 0;
 
-		/* Ensure that updates to the QH will occure before priming. */
+		/* Ensure that updates to the QH will occur before priming. */
 		wmb();
 
 		/* Prime the Endpoint */
@@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
 		return IRQ_NONE;
 	}
 
-	/* Clear all the interrupts occured */
+	/* Clear all the interrupts occurred */
 	writel(status, &udc->op_regs->usbsts);
 
 	if (status & USBSTS_ERR)
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d09155b25d7..24696f7fa6a 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -117,7 +117,7 @@ module_param (fifo_mode, ushort, 0644);
 
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
- * USB suspend requests will be ignored.  This is acceptible for
+ * USB suspend requests will be ignored.  This is acceptable for
  * self-powered devices
  */
 static int enable_suspend = 0;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index b5364f9d7cd..55ca63ad350 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -203,7 +203,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 		goto err_usb;
 	}
 
-	/* finaly register the configuration */
+	/* finally register the configuration */
 	status = usb_add_config(cdev, &nokia_config_500ma_driver,
 			nokia_bind_config);
 	if (status < 0)
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index cb5cd422f3f..82fd2493533 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,6 +44,7 @@
 #include <linux/usb/otg.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
+#include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 3e4b35e50c2..68dbcc3e4cc 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -1608,7 +1608,7 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 		return -EINVAL;
 	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
-	spin_lock_irqsave(&ep->dev->lock, iflags);
+	spin_lock_irqsave(&dev->lock, iflags);
 	/* map the buffer for dma */
 	if (usbreq->length &&
 	    ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
@@ -1625,8 +1625,10 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 							     DMA_FROM_DEVICE);
 		} else {
 			req->buf = kzalloc(usbreq->length, GFP_ATOMIC);
-			if (!req->buf)
-				return -ENOMEM;
+			if (!req->buf) {
+				retval = -ENOMEM;
+				goto probe_end;
+			}
 			if (ep->in) {
 				memcpy(req->buf, usbreq->buf, usbreq->length);
 				req->dma = dma_map_single(&dev->pdev->dev,
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 12ff6cffedc..c3f2bd42bd5 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -126,7 +126,7 @@ static struct printer_dev usb_printer_gadget;
 #define PRINTER_VENDOR_NUM	0x0525		/* NetChip */
 #define PRINTER_PRODUCT_NUM	0xa4a8		/* Linux-USB Printer Gadget */
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index b37f92cb71b..365c02fc25f 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -46,6 +46,7 @@
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/io.h>
+#include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
 #include <asm/dma.h>
@@ -139,24 +140,6 @@ static const char ep0name [] = "ep0";
 static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
 static void nuke (struct pxa25x_ep *, int status);
 
-/* one GPIO should be used to detect VBUS from the host */
-static int is_vbus_present(void)
-{
-	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
-
-	if (gpio_is_valid(mach->gpio_vbus)) {
-		int value = gpio_get_value(mach->gpio_vbus);
-
-		if (mach->gpio_vbus_inverted)
-			return !value;
-		else
-			return !!value;
-	}
-	if (mach->udc_is_connected)
-		return mach->udc_is_connected();
-	return 1;
-}
-
 /* one GPIO should control a D+ pullup, so host sees this device (or not) */
 static void pullup_off(void)
 {
@@ -1055,7 +1038,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 		"%s version: %s\nGadget driver: %s\nHost %s\n\n",
 		driver_name, DRIVER_VERSION SIZE_STR "(pio)",
 		dev->driver ? dev->driver->driver.name : "(none)",
-		is_vbus_present() ? "full speed" : "disconnected");
+		dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected");
 
 	/* registers for device and ep0 */
 	seq_printf(m,
@@ -1094,7 +1077,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 			(tmp & UDCCFR_ACM) ? " acm" : "");
 	}
 
-	if (!is_vbus_present() || !dev->driver)
+	if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver)
 		goto done;
 
 	seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
@@ -1435,14 +1418,6 @@ lubbock_vbus_irq(int irq, void *_dev)
 
 #endif
 
-static irqreturn_t udc_vbus_irq(int irq, void *_dev)
-{
-	struct pxa25x_udc	*dev = _dev;
-
-	pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
-	return IRQ_HANDLED;
-}
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -1766,12 +1741,9 @@ pxa25x_udc_irq(int irq, void *_dev)
 		if (unlikely(udccr & UDCCR_SUSIR)) {
 			udc_ack_int_UDCCR(UDCCR_SUSIR);
 			handled = 1;
-			DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
-				? "" : "+disconnect");
+			DBG(DBG_VERBOSE, "USB suspend\n");
 
-			if (!is_vbus_present())
-				stop_activity(dev, dev->driver);
-			else if (dev->gadget.speed != USB_SPEED_UNKNOWN
+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
 					&& dev->driver
 					&& dev->driver->suspend)
 				dev->driver->suspend(&dev->gadget);
@@ -1786,8 +1758,7 @@ pxa25x_udc_irq(int irq, void *_dev)
 
 			if (dev->gadget.speed != USB_SPEED_UNKNOWN
 					&& dev->driver
-					&& dev->driver->resume
-					&& is_vbus_present())
+					&& dev->driver->resume)
 				dev->driver->resume(&dev->gadget);
 		}
 
@@ -2137,7 +2108,7 @@ static struct pxa25x_udc memory = {
 static int __init pxa25x_udc_probe(struct platform_device *pdev)
 {
 	struct pxa25x_udc *dev = &memory;
-	int retval, vbus_irq, irq;
+	int retval, irq;
 	u32 chiprev;
 
 	/* insist on Intel/ARM/XScale */
@@ -2199,19 +2170,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 
 	dev->transceiver = otg_get_transceiver();
 
-	if (gpio_is_valid(dev->mach->gpio_vbus)) {
-		if ((retval = gpio_request(dev->mach->gpio_vbus,
-				"pxa25x_udc GPIO VBUS"))) {
-			dev_dbg(&pdev->dev,
-				"can't get vbus gpio %d, err: %d\n",
-				dev->mach->gpio_vbus, retval);
-			goto err_gpio_vbus;
-		}
-		gpio_direction_input(dev->mach->gpio_vbus);
-		vbus_irq = gpio_to_irq(dev->mach->gpio_vbus);
-	} else
-		vbus_irq = 0;
-
 	if (gpio_is_valid(dev->mach->gpio_pullup)) {
 		if ((retval = gpio_request(dev->mach->gpio_pullup,
 				"pca25x_udc GPIO PULLUP"))) {
@@ -2237,7 +2195,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	udc_disable(dev);
 	udc_reinit(dev);
 
-	dev->vbus = !!is_vbus_present();
+	dev->vbus = 0;
 
 	/* irq setup after old hardware state is cleaned up */
 	retval = request_irq(irq, pxa25x_udc_irq,
@@ -2273,22 +2231,10 @@ lubbock_fail0:
 		}
 	} else
 #endif
-	if (vbus_irq) {
-		retval = request_irq(vbus_irq, udc_vbus_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				driver_name, dev);
-		if (retval != 0) {
-			pr_err("%s: can't get irq %i, err %d\n",
-				driver_name, vbus_irq, retval);
-			goto err_vbus_irq;
-		}
-	}
 	create_debug_files(dev);
 
 	return 0;
 
- err_vbus_irq:
 #ifdef	CONFIG_ARCH_LUBBOCK
 	free_irq(LUBBOCK_USB_DISC_IRQ, dev);
  err_irq_lub:
@@ -2298,9 +2244,6 @@ lubbock_fail0:
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
-	if (gpio_is_valid(dev->mach->gpio_vbus))
-		gpio_free(dev->mach->gpio_vbus);
- err_gpio_vbus:
 	if (dev->transceiver) {
 		otg_put_transceiver(dev->transceiver);
 		dev->transceiver = NULL;
@@ -2337,10 +2280,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 		free_irq(LUBBOCK_USB_IRQ, dev);
 	}
 #endif
-	if (gpio_is_valid(dev->mach->gpio_vbus)) {
-		free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
-		gpio_free(dev->mach->gpio_vbus);
-	}
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 2efd6732d13..57607696735 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -32,6 +32,7 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>
@@ -602,7 +603,7 @@ static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
 /**
  * inc_ep_stats_bytes - Update ep stats counts
  * @ep: physical endpoint
- * @count: bytes transfered on endpoint
+ * @count: bytes transferred on endpoint
  * @is_in: ep direction (USB_DIR_IN or 0)
  */
 static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
@@ -877,7 +878,7 @@ static void nuke(struct pxa_ep *ep, int status)
  * If there is less space in request than bytes received in OUT endpoint,
  * bytes are left in the OUT endpoint.
  *
- * Returns how many bytes were actually transfered
+ * Returns how many bytes were actually transferred
  */
 static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -914,7 +915,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
  * endpoint. If there are no bytes to transfer, doesn't write anything
  * to physical endpoint.
  *
- * Returns how many bytes were actually transfered.
+ * Returns how many bytes were actually transferred.
  */
 static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
 			unsigned int max)
@@ -991,7 +992,7 @@ static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * caller guarantees at least one packet buffer is ready (or a zlp).
  * Doesn't complete the request, that's the caller's job
  *
- * Returns 1 if request fully transfered, 0 if partial transfer
+ * Returns 1 if request fully transferred, 0 if partial transfer
  */
 static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -1094,7 +1095,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * Sends a request (or a part of the request) to the control endpoint (ep0 in).
  * If the request doesn't fit, the remaining part will be sent from irq.
  * The request is considered fully written only if either :
- *   - last write transfered all remaining bytes, but fifo was not fully filled
+ *   - last write transferred all remaining bytes, but fifo was not fully filled
  *   - last write was a 0 length write
  *
  * Returns 1 if request fully written, 0 if request only partially sent
@@ -1548,7 +1549,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)
  * pxa_udc_wakeup - Force udc device out of suspend
  * @_gadget: usb gadget
  *
- * Returns 0 if successfull, error code otherwise
+ * Returns 0 if successful, error code otherwise
  */
 static int pxa_udc_wakeup(struct usb_gadget *_gadget)
 {
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 015118535f7..6dcc1f68fa6 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1083,7 +1083,9 @@ static void irq_device_state(struct r8a66597 *r8a66597)
 
 	if (dvsq == DS_DFLT) {
 		/* bus reset */
+		spin_unlock(&r8a66597->lock);
 		r8a66597->driver->disconnect(&r8a66597->gadget);
+		spin_lock(&r8a66597->lock);
 		r8a66597_update_usb_speed(r8a66597);
 	}
 	if (r8a66597->old_dvsq == DS_CNFG && dvsq != DS_CNFG)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ef825c3baed..0912679de99 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -41,8 +41,8 @@
 /* EP0_MPS_LIMIT
  *
  * Unfortunately there seems to be a limit of the amount of data that can
- * be transfered by IN transactions on EP0. This is either 127 bytes or 3
- * packets (which practially means 1 packet and 63 bytes of data) when the
+ * be transferred by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practically means 1 packet and 63 bytes of data) when the
  * MPS is set to 64.
  *
  * This means if we are wanting to move >127 bytes of data, we need to
@@ -783,7 +783,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 		       hsotg->regs + S3C_DIEPINT(index));
 
 	/* Note, trying to clear the NAK here causes problems with transmit
-	 * on the S3C6400 ending up with the TXFIFO becomming full. */
+	 * on the S3C6400 ending up with the TXFIFO becoming full. */
 
 	/* check ep is enabled */
 	if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
@@ -1176,10 +1176,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
 		writel(ctrl, hsotg->regs + reg);
 
 		dev_dbg(hsotg->dev,
-			"writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+			"written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
 			ctrl, reg, readl(hsotg->regs + reg));
 
-		/* don't belive we need to anything more to get the EP
+		/* don't believe we need to anything more to get the EP
 		 * to reply with a STALL packet */
 	}
 }
@@ -1416,7 +1416,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
  * transaction.
  *
  * Note, since we don't write any data to the TxFIFO, then it is
- * currently belived that we do not need to wait for any space in
+ * currently believed that we do not need to wait for any space in
  * the TxFIFO.
  */
 static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
@@ -1540,7 +1540,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
  * that requires processing, so find out what is in there and do the
  * appropriate read.
  *
- * The RXFIFO is a true FIFO, the packets comming out are still in packet
+ * The RXFIFO is a true FIFO, the packets coming out are still in packet
  * chunks, so if you have x packets received on an endpoint you'll get x
  * FIFO events delivered, each with a packet's worth of data in it.
  *
@@ -2188,7 +2188,7 @@ irq_retry:
 
 	/* these next two seem to crop-up occasionally causing the core
 	 * to shutdown the USB transfer, so try clearing them and logging
-	 * the occurence. */
+	 * the occurrence. */
 
 	if (gintsts & S3C_GINTSTS_GOUTNakEff) {
 		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
@@ -2469,7 +2469,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = {
 	.queue		= s3c_hsotg_ep_queue,
 	.dequeue	= s3c_hsotg_ep_dequeue,
 	.set_halt	= s3c_hsotg_ep_sethalt,
-	/* note, don't belive we have any call for the fifo routines */
+	/* note, don't believe we have any call for the fifo routines */
 };
 
 /**
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 9483acdf2e9..e0e0787b724 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -402,7 +402,7 @@ config FHCI_DEBUG
 	depends on USB_FHCI_HCD && DEBUG_FS
 	help
 	  Say "y" to see some FHCI debug information and statistics
-	  throught debugfs.
+	  through debugfs.
 
 config USB_U132_HCD
 	tristate "Elan U132 Adapter Host Controller"
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 7e41a95c5ce..627f3a67875 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -40,6 +40,7 @@
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
 #include <plat/usb.h>
+#include <linux/regulator/consumer.h>
 
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
@@ -118,6 +119,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	struct ehci_hcd				*omap_ehci;
 	int					ret = -ENODEV;
 	int					irq;
+	int					i;
+	char					supply[7];
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -158,6 +161,23 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(res);
 	hcd->regs = regs;
 
+	/* get ehci regulator and enable */
+	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+		if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
+			pdata->regulator[i] = NULL;
+			continue;
+		}
+		snprintf(supply, sizeof(supply), "hsusb%d", i);
+		pdata->regulator[i] = regulator_get(dev, supply);
+		if (IS_ERR(pdata->regulator[i])) {
+			pdata->regulator[i] = NULL;
+			dev_dbg(dev,
+			"failed to get ehci port%d regulator\n", i);
+		} else {
+			regulator_enable(pdata->regulator[i]);
+		}
+	}
+
 	ret = omap_usbhs_enable(dev);
 	if (ret) {
 		dev_err(dev, "failed to start usbhs with err %d\n", ret);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 98ded66e8d3..42abd0f603b 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1247,24 +1247,27 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 static void scan_async (struct ehci_hcd *ehci)
 {
+	bool			stopped;
 	struct ehci_qh		*qh;
 	enum ehci_timer_action	action = TIMER_IO_WATCHDOG;
 
 	ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index);
 	timer_action_done (ehci, TIMER_ASYNC_SHRINK);
 rescan:
+	stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
 	qh = ehci->async->qh_next.qh;
 	if (likely (qh != NULL)) {
 		do {
 			/* clean any finished work for this qh */
-			if (!list_empty (&qh->qtd_list)
-					&& qh->stamp != ehci->stamp) {
+			if (!list_empty(&qh->qtd_list) && (stopped ||
+					qh->stamp != ehci->stamp)) {
 				int temp;
 
 				/* unlinks could happen here; completion
 				 * reporting drops the lock.  rescan using
 				 * the latest schedule, but don't rescan
-				 * qhs we already finished (no looping).
+				 * qhs we already finished (no looping)
+				 * unless the controller is stopped.
 				 */
 				qh = qh_get (qh);
 				qh->stamp = ehci->stamp;
@@ -1285,9 +1288,9 @@ rescan:
 			 */
 			if (list_empty(&qh->qtd_list)
 					&& qh->qh_state == QH_STATE_LINKED) {
-				if (!ehci->reclaim
-					&& ((ehci->stamp - qh->stamp) & 0x1fff)
-						>= (EHCI_SHRINK_FRAMES * 8))
+				if (!ehci->reclaim && (stopped ||
+					((ehci->stamp - qh->stamp) & 0x1fff)
+						>= EHCI_SHRINK_FRAMES * 8))
 					start_unlink_async(ehci, qh);
 				else
 					action = TIMER_ASYNC_SHRINK;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index f86d3fa2021..333ddc15691 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -644,7 +644,7 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,
 /*
  * On certain ppc-44x SoC there is a HW issue, that could only worked around with
  * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
- * Other common bits are dependant on has_amcc_usb23 quirk flag.
+ * Other common bits are dependent on has_amcc_usb23 quirk flag.
  */
 #ifdef CONFIG_44x
 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index b84ff7e5189..19223c7449e 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -401,7 +401,7 @@ static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		/* 1 td fro setup,1 for ack */
 		size = 2;
 	case PIPE_BULK:
-		/* one td for every 4096 bytes(can be upto 8k) */
+		/* one td for every 4096 bytes(can be up to 8k) */
 		size += urb->transfer_buffer_length / 4096;
 		/* ...add for any remaining bytes... */
 		if ((urb->transfer_buffer_length % 4096) != 0)
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 38fe058fbe6..0ea577bfca2 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -40,7 +40,7 @@
 #define TD_RXER		0x0020 /* Rx error or not */
 
 #define TD_NAK		0x0010 /* No ack. */
-#define TD_STAL		0x0008 /* Stall recieved */
+#define TD_STAL		0x0008 /* Stall received */
 #define TD_TO		0x0004 /* time out */
 #define TD_UN		0x0002 /* underrun */
 #define TD_NO		0x0010 /* Rx Non Octet Aligned Packet */
@@ -274,7 +274,7 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
  * It is also preparing the TDs for new frames. If the Tx interrupts
  * are disabled, the application should call that routine to get
  * confirmation about the submitted frames. Otherwise, the routine is
- * called frome the interrupt service routine during the Tx interrupt.
+ * called from the interrupt service routine during the Tx interrupt.
  * In that case the application is informed by calling the application
  * specific 'fhci_transaction_confirm' routine
  */
@@ -337,7 +337,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
 					pkt->status = USB_TD_RX_ER_NONOCT;
 				else
 					fhci_err(usb->fhci, "illegal error "
-						 "occured\n");
+						 "occurred\n");
 			} else if (td_status & TD_NAK)
 				pkt->status = USB_TD_TX_ER_NAK;
 			else if (td_status & TD_TO)
@@ -347,7 +347,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
 			else if (td_status & TD_STAL)
 				pkt->status = USB_TD_TX_ER_STALL;
 			else
-				fhci_err(usb->fhci, "illegal error occured\n");
+				fhci_err(usb->fhci, "illegal error occurred\n");
 		} else if ((extra_data & TD_TOK_IN) &&
 				pkt->len > td_length - CRC_SIZE) {
 			pkt->status = USB_TD_RX_DATA_UNDERUN;
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 71c3caaea4c..dc6939a44a1 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -82,7 +82,7 @@
 #define USB_TD_RX_ER_NONOCT	0x40000000 /* Tx Non Octet Aligned Packet */
 #define USB_TD_RX_ER_BITSTUFF	0x20000000 /* Frame Aborted-Received pkt */
 #define USB_TD_RX_ER_CRC	0x10000000 /* CRC error */
-#define USB_TD_RX_ER_OVERUN	0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_OVERUN	0x08000000 /* Over - run occurred */
 #define USB_TD_RX_ER_PID	0x04000000 /* wrong PID received */
 #define USB_TD_RX_DATA_UNDERUN	0x02000000 /* shorter than expected */
 #define USB_TD_RX_DATA_OVERUN	0x01000000 /* longer than expected */
@@ -363,7 +363,7 @@ struct ed {
 struct td {
 	void *data;		 /* a pointer to the data buffer */
 	unsigned int len;	 /* length of the data to be submitted */
-	unsigned int actual_len; /* actual bytes transfered on this td */
+	unsigned int actual_len; /* actual bytes transferred on this td */
 	enum fhci_ta_type type;	 /* transaction type */
 	u8 toggle;		 /* toggle for next trans. within this TD */
 	u16 iso_index;		 /* ISO transaction index */
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 2562e92e317..af05718bdc7 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1323,7 +1323,7 @@ static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof)
  * (and hence no interrupt occurs).
  * This causes the transfer in question to hang.
  * The kludge below checks for this condition at each SOF and processes any
- * blocked ETDs (after an arbitary 10 frame wait)
+ * blocked ETDs (after an arbitrary 10 frame wait)
  *
  * With a single active transfer the usbtest test suite will run for days
  * without the kludge.
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 12db961acdf..9a2c400e609 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -13,7 +13,7 @@
 
 /* Full speed: max # of bytes to transfer for a single urb
    at a time must be < 1024 && must be multiple of 64.
-   832 allows transfering 4kiB within 5 frames. */
+   832 allows transferring 4kiB within 5 frames. */
 #define MAX_TRANSFER_SIZE_FULLSPEED	832
 
 /* Low speed: there is no reason to schedule in very big
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 662cd002adf..9c37dad3e81 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -81,6 +81,7 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/bitmap.h>
+#include <linux/prefetch.h>
 
 #include <asm/irq.h>
 #include <asm/system.h>
@@ -546,7 +547,7 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
 			if (usb_pipecontrol(urb->pipe)) {
 				ep->nextpid = USB_PID_ACK;
 				/* save the data underrun error code for later and
-				 * procede with the status stage
+				 * proceed with the status stage
 				 */
 				urb->actual_length += PTD_GET_COUNT(ptd);
 				BUG_ON(urb->actual_length > urb->transfer_buffer_length);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index f50e84ac570..7b2e69aa2e9 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -295,7 +295,7 @@ static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 	}
 
 	dev_err(hcd->self.controller,
-				"%s: Can not allocate %lu bytes of memory\n"
+				"%s: Cannot allocate %zu bytes of memory\n"
 				"Current memory map:\n",
 				__func__, qtd->length);
 	for (i = 0; i < BLOCKS; i++) {
@@ -1633,6 +1633,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			ints[i].qh = NULL;
 			ints[i].qtd = NULL;
 
+			urb->status = status;
 			isp1760_urb_done(hcd, urb);
 			if (qtd)
 				pe(hcd, qh, qtd);
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 17a6043c1fa..958d985f295 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -33,7 +33,7 @@
 
 #ifdef __LITTLE_ENDIAN
 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#elif __BIG_ENDIAN
+#elif defined(__BIG_ENDIAN)
 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
 			  USBH_ENABLE_BE)
 #else
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index e7288639edb..d5572351486 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -162,7 +162,7 @@ static int ohci_urb_enqueue (
 		// case PIPE_INTERRUPT:
 		// case PIPE_BULK:
 		default:
-			/* one TD for every 4096 Bytes (can be upto 8K) */
+			/* one TD for every 4096 Bytes (can be up to 8K) */
 			size += urb->transfer_buffer_length / 4096;
 			/* ... and for any remaining bytes ... */
 			if ((urb->transfer_buffer_length % 4096) != 0)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 44e4deb362e..4a771f6cc82 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -2879,7 +2879,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 	/* Ok, we have more job to do! :) */
 
 	for (i = 0; i < num - 1; i++) {
-		/* Get free micro URB poll till a free urb is recieved */
+		/* Get free micro URB poll till a free urb is received */
 
 		do {
 			murb = (struct urb *) oxu_murb_alloc(oxu);
@@ -2911,7 +2911,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 
 	/* Last urb requires special handling  */
 
-	/* Get free micro URB poll till a free urb is recieved */
+	/* Get free micro URB poll till a free urb is received */
 	do {
 		murb = (struct urb *) oxu_murb_alloc(oxu);
 		if (!murb)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 1d586d4f7b5..9b166d70ae9 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -84,65 +84,92 @@ int usb_amd_find_chipset_info(void)
 {
 	u8 rev = 0;
 	unsigned long flags;
+	struct amd_chipset_info info;
+	int ret;
 
 	spin_lock_irqsave(&amd_lock, flags);
 
-	amd_chipset.probe_count++;
 	/* probe only once */
-	if (amd_chipset.probe_count > 1) {
+	if (amd_chipset.probe_count > 0) {
+		amd_chipset.probe_count++;
 		spin_unlock_irqrestore(&amd_lock, flags);
 		return amd_chipset.probe_result;
 	}
+	memset(&info, 0, sizeof(info));
+	spin_unlock_irqrestore(&amd_lock, flags);
 
-	amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
-	if (amd_chipset.smbus_dev) {
-		rev = amd_chipset.smbus_dev->revision;
+	info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+	if (info.smbus_dev) {
+		rev = info.smbus_dev->revision;
 		if (rev >= 0x40)
-			amd_chipset.sb_type = 1;
+			info.sb_type = 1;
 		else if (rev >= 0x30 && rev <= 0x3b)
-			amd_chipset.sb_type = 3;
+			info.sb_type = 3;
 	} else {
-		amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-							0x780b, NULL);
-		if (!amd_chipset.smbus_dev) {
-			spin_unlock_irqrestore(&amd_lock, flags);
-			return 0;
+		info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+						0x780b, NULL);
+		if (!info.smbus_dev) {
+			ret = 0;
+			goto commit;
 		}
-		rev = amd_chipset.smbus_dev->revision;
+
+		rev = info.smbus_dev->revision;
 		if (rev >= 0x11 && rev <= 0x18)
-			amd_chipset.sb_type = 2;
+			info.sb_type = 2;
 	}
 
-	if (amd_chipset.sb_type == 0) {
-		if (amd_chipset.smbus_dev) {
-			pci_dev_put(amd_chipset.smbus_dev);
-			amd_chipset.smbus_dev = NULL;
+	if (info.sb_type == 0) {
+		if (info.smbus_dev) {
+			pci_dev_put(info.smbus_dev);
+			info.smbus_dev = NULL;
 		}
-		spin_unlock_irqrestore(&amd_lock, flags);
-		return 0;
+		ret = 0;
+		goto commit;
 	}
 
-	amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
-	if (amd_chipset.nb_dev) {
-		amd_chipset.nb_type = 1;
+	info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
+	if (info.nb_dev) {
+		info.nb_type = 1;
 	} else {
-		amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-							0x1510, NULL);
-		if (amd_chipset.nb_dev) {
-			amd_chipset.nb_type = 2;
-		} else  {
-			amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-								0x9600, NULL);
-			if (amd_chipset.nb_dev)
-				amd_chipset.nb_type = 3;
+		info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+		if (info.nb_dev) {
+			info.nb_type = 2;
+		} else {
+			info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+						     0x9600, NULL);
+			if (info.nb_dev)
+				info.nb_type = 3;
 		}
 	}
 
-	amd_chipset.probe_result = 1;
+	ret = info.probe_result = 1;
 	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
 
-	spin_unlock_irqrestore(&amd_lock, flags);
-	return amd_chipset.probe_result;
+commit:
+
+	spin_lock_irqsave(&amd_lock, flags);
+	if (amd_chipset.probe_count > 0) {
+		/* race - someone else was faster - drop devices */
+
+		/* Mark that we where here */
+		amd_chipset.probe_count++;
+		ret = amd_chipset.probe_result;
+
+		spin_unlock_irqrestore(&amd_lock, flags);
+
+		if (info.nb_dev)
+			pci_dev_put(info.nb_dev);
+		if (info.smbus_dev)
+			pci_dev_put(info.smbus_dev);
+
+	} else {
+		/* no race - commit the result */
+		info.probe_count++;
+		amd_chipset = info;
+		spin_unlock_irqrestore(&amd_lock, flags);
+	}
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
 
@@ -284,6 +311,7 @@ EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
 
 void usb_amd_dev_put(void)
 {
+	struct pci_dev *nb, *smbus;
 	unsigned long flags;
 
 	spin_lock_irqsave(&amd_lock, flags);
@@ -294,20 +322,23 @@ void usb_amd_dev_put(void)
 		return;
 	}
 
-	if (amd_chipset.nb_dev) {
-		pci_dev_put(amd_chipset.nb_dev);
-		amd_chipset.nb_dev = NULL;
-	}
-	if (amd_chipset.smbus_dev) {
-		pci_dev_put(amd_chipset.smbus_dev);
-		amd_chipset.smbus_dev = NULL;
-	}
+	/* save them to pci_dev_put outside of spinlock */
+	nb    = amd_chipset.nb_dev;
+	smbus = amd_chipset.smbus_dev;
+
+	amd_chipset.nb_dev = NULL;
+	amd_chipset.smbus_dev = NULL;
 	amd_chipset.nb_type = 0;
 	amd_chipset.sb_type = 0;
 	amd_chipset.isoc_reqs = 0;
 	amd_chipset.probe_result = 0;
 
 	spin_unlock_irqrestore(&amd_lock, flags);
+
+	if (nb)
+		pci_dev_put(nb);
+	if (smbus)
+		pci_dev_put(smbus);
 }
 EXPORT_SYMBOL_GPL(usb_amd_dev_put);
 
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 18b7099a812..fafccc2fd33 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -47,6 +47,7 @@
 #include <linux/usb/sl811.h>
 #include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
+#include <linux/prefetch.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index dc0ab8382f5..d6e17542861 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -739,7 +739,7 @@ static int get_urb_status_from_qtd(struct urb *urb, u32 status)
  * process_inactive_qtd - process an inactive (but not halted) qTD.
  *
  * Update the urb with the transfer bytes from the qTD, if the urb is
- * completely transfered or (in the case of an IN only) the LPF is
+ * completely transferred or (in the case of an IN only) the LPF is
  * set, then the transfer is complete and the urb should be returned
  * to the system.
  */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a78f2ebd11b..73f75d26436 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -777,7 +777,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 		if (t1 != t2)
 			xhci_writel(xhci, t2, port_array[port_index]);
 
-		if (DEV_HIGHSPEED(t1)) {
+		if (hcd->speed != HCD_USB3) {
 			/* enable remote wake up for USB 2.0 */
 			u32 __iomem *addr;
 			u32 tmp;
@@ -866,6 +866,21 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 				temp |= PORT_LINK_STROBE | XDEV_U0;
 				xhci_writel(xhci, temp, port_array[port_index]);
 			}
+			/* wait for the port to enter U0 and report port link
+			 * state change.
+			 */
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(20);
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			/* Clear PLC */
+			temp = xhci_readl(xhci, port_array[port_index]);
+			if (temp & PORT_PLC) {
+				temp = xhci_port_state_to_neutral(temp);
+				temp |= PORT_PLC;
+				xhci_writel(xhci, temp, port_array[port_index]);
+			}
+
 			slot_id = xhci_find_slot_id_by_port(hcd,
 					xhci, port_index + 1);
 			if (slot_id)
@@ -873,7 +888,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		} else
 			xhci_writel(xhci, temp, port_array[port_index]);
 
-		if (DEV_HIGHSPEED(temp)) {
+		if (hcd->speed != HCD_USB3) {
 			/* disable remote wake up for USB 2.0 */
 			u32 __iomem *addr;
 			u32 tmp;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index a003e79aacd..627f3438028 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -846,7 +846,7 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
 		 * Skip ports that don't have known speeds, or have duplicate
 		 * Extended Capabilities port speed entries.
 		 */
-		if (port_speed == 0 || port_speed == -1)
+		if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
 			continue;
 
 		/*
@@ -974,6 +974,47 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	return 0;
 }
 
+/*
+ * Convert interval expressed as 2^(bInterval - 1) == interval into
+ * straight exponent value 2^n == interval.
+ *
+ */
+static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval;
+
+	interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
+	if (interval != ep->desc.bInterval - 1)
+		dev_warn(&udev->dev,
+			 "ep %#x - rounding interval to %d microframes\n",
+			 ep->desc.bEndpointAddress,
+			 1 << interval);
+
+	return interval;
+}
+
+/*
+ * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * microframes, rounded down to nearest power of 2.
+ */
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval;
+
+	interval = fls(8 * ep->desc.bInterval) - 1;
+	interval = clamp_val(interval, 3, 10);
+	if ((1 << interval) != 8 * ep->desc.bInterval)
+		dev_warn(&udev->dev,
+			 "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
+			 ep->desc.bEndpointAddress,
+			 1 << interval,
+			 8 * ep->desc.bInterval);
+
+	return interval;
+}
+
 /* Return the polling or NAK interval.
  *
  * The polling interval is expressed in "microframes".  If xHCI's Interval field
@@ -982,7 +1023,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
  * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
  * is set to 0.
  */
-static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
+static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	unsigned int interval = 0;
@@ -991,45 +1032,38 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 	case USB_SPEED_HIGH:
 		/* Max NAK rate */
 		if (usb_endpoint_xfer_control(&ep->desc) ||
-				usb_endpoint_xfer_bulk(&ep->desc))
+		    usb_endpoint_xfer_bulk(&ep->desc)) {
 			interval = ep->desc.bInterval;
+			break;
+		}
 		/* Fall through - SS and HS isoc/int have same decoding */
+
 	case USB_SPEED_SUPER:
 		if (usb_endpoint_xfer_int(&ep->desc) ||
-				usb_endpoint_xfer_isoc(&ep->desc)) {
-			if (ep->desc.bInterval == 0)
-				interval = 0;
-			else
-				interval = ep->desc.bInterval - 1;
-			if (interval > 15)
-				interval = 15;
-			if (interval != ep->desc.bInterval + 1)
-				dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
-						ep->desc.bEndpointAddress, 1 << interval);
+		    usb_endpoint_xfer_isoc(&ep->desc)) {
+			interval = xhci_parse_exponent_interval(udev, ep);
 		}
 		break;
-	/* Convert bInterval (in 1-255 frames) to microframes and round down to
-	 * nearest power of 2.
-	 */
+
 	case USB_SPEED_FULL:
+		if (usb_endpoint_xfer_int(&ep->desc)) {
+			interval = xhci_parse_exponent_interval(udev, ep);
+			break;
+		}
+		/*
+		 * Fall through for isochronous endpoint interval decoding
+		 * since it uses the same rules as low speed interrupt
+		 * endpoints.
+		 */
+
 	case USB_SPEED_LOW:
 		if (usb_endpoint_xfer_int(&ep->desc) ||
-				usb_endpoint_xfer_isoc(&ep->desc)) {
-			interval = fls(8*ep->desc.bInterval) - 1;
-			if (interval > 10)
-				interval = 10;
-			if (interval < 3)
-				interval = 3;
-			if ((1 << interval) != 8*ep->desc.bInterval)
-				dev_warn(&udev->dev,
-						"ep %#x - rounding interval"
-						" to %d microframes, "
-						"ep desc says %d microframes\n",
-						ep->desc.bEndpointAddress,
-						1 << interval,
-						8*ep->desc.bInterval);
+		    usb_endpoint_xfer_isoc(&ep->desc)) {
+
+			interval = xhci_parse_frame_interval(udev, ep);
 		}
 		break;
+
 	default:
 		BUG();
 	}
@@ -1041,7 +1075,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
  * transaction opportunities per microframe", but that goes in the Max Burst
  * endpoint context field.
  */
-static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
+static u32 xhci_get_endpoint_mult(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	if (udev->speed != USB_SPEED_SUPER ||
@@ -1050,7 +1084,7 @@ static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
 	return ep->ss_ep_comp.bmAttributes;
 }
 
-static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
+static u32 xhci_get_endpoint_type(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	int in;
@@ -1084,7 +1118,7 @@ static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
  * Basically, this is the maxpacket size, multiplied by the burst size
  * and mult size.
  */
-static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
+static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 		struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
@@ -1727,12 +1761,12 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 			 * found a similar duplicate.
 			 */
 			if (xhci->port_array[i] != major_revision &&
-				xhci->port_array[i] != (u8) -1) {
+				xhci->port_array[i] != DUPLICATE_ENTRY) {
 				if (xhci->port_array[i] == 0x03)
 					xhci->num_usb3_ports--;
 				else
 					xhci->num_usb2_ports--;
-				xhci->port_array[i] = (u8) -1;
+				xhci->port_array[i] = DUPLICATE_ENTRY;
 			}
 			/* FIXME: Should we disable the port? */
 			continue;
@@ -1831,7 +1865,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 		for (i = 0; i < num_ports; i++) {
 			if (xhci->port_array[i] == 0x03 ||
 					xhci->port_array[i] == 0 ||
-					xhci->port_array[i] == -1)
+					xhci->port_array[i] == DUPLICATE_ENTRY)
 				continue;
 
 			xhci->usb2_ports[port_index] =
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ceea9f33491..a10494c2f3c 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -114,6 +114,10 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
+	/* AMD PLL quirk */
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
+		xhci->quirks |= XHCI_AMD_PLL_FIX;
+
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cfc1ad92473..7437386a9a5 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -93,7 +93,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
 /* Does this link TRB point to the first segment in a ring,
  * or was the previous TRB the last TRB on the last segment in the ERST?
  */
-static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
+static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
 		struct xhci_segment *seg, union xhci_trb *trb)
 {
 	if (ring == xhci->event_ring)
@@ -107,7 +107,7 @@ static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring
  * segment?  I.e. would the updated event TRB pointer step off the end of the
  * event seg?
  */
-static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 		struct xhci_segment *seg, union xhci_trb *trb)
 {
 	if (ring == xhci->event_ring)
@@ -116,7 +116,7 @@ static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 		return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK);
 }
 
-static inline int enqueue_is_link_trb(struct xhci_ring *ring)
+static int enqueue_is_link_trb(struct xhci_ring *ring)
 {
 	struct xhci_link_trb *link = &ring->enqueue->link;
 	return ((link->control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK));
@@ -592,7 +592,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 	ep->ep_state |= SET_DEQ_PENDING;
 }
 
-static inline void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
+static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
 		struct xhci_virt_ep *ep)
 {
 	ep->ep_state &= ~EP_HALT_PENDING;
@@ -619,6 +619,13 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
 
 	/* Only giveback urb when this is the last td in urb */
 	if (urb_priv->td_cnt == urb_priv->length) {
+		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+			xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
+			if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs	== 0) {
+				if (xhci->quirks & XHCI_AMD_PLL_FIX)
+					usb_amd_quirk_pll_enable();
+			}
+		}
 		usb_hcd_unlink_urb_from_ep(hcd, urb);
 		xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb);
 
@@ -1209,7 +1216,7 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
 		 * Skip ports that don't have known speeds, or have duplicate
 		 * Extended Capabilities port speed entries.
 		 */
-		if (port_speed == 0 || port_speed == -1)
+		if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
 			continue;
 
 		/*
@@ -1235,6 +1242,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	u8 major_revision;
 	struct xhci_bus_state *bus_state;
 	u32 __iomem **port_array;
+	bool bogus_port_status = false;
 
 	/* Port status change events always have a successful completion code */
 	if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) {
@@ -1247,6 +1255,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
 	if ((port_id <= 0) || (port_id > max_ports)) {
 		xhci_warn(xhci, "Invalid port id %d\n", port_id);
+		bogus_port_status = true;
 		goto cleanup;
 	}
 
@@ -1258,12 +1267,14 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		xhci_warn(xhci, "Event for port %u not in "
 				"Extended Capabilities, ignoring.\n",
 				port_id);
+		bogus_port_status = true;
 		goto cleanup;
 	}
-	if (major_revision == (u8) -1) {
+	if (major_revision == DUPLICATE_ENTRY) {
 		xhci_warn(xhci, "Event for port %u duplicated in"
 				"Extended Capabilities, ignoring.\n",
 				port_id);
+		bogus_port_status = true;
 		goto cleanup;
 	}
 
@@ -1335,6 +1346,13 @@ cleanup:
 	/* Update event ring dequeue pointer before dropping the lock */
 	inc_deq(xhci, xhci->event_ring, true);
 
+	/* Don't make the USB core poll the roothub if we got a bad port status
+	 * change event.  Besides, at that point we can't tell which roothub
+	 * (USB 2.0 or USB 3.0) to kick.
+	 */
+	if (bogus_port_status)
+		return;
+
 	spin_unlock(&xhci->lock);
 	/* Pass this up to the core */
 	usb_hcd_poll_rh_status(hcd);
@@ -1554,8 +1572,17 @@ td_cleanup:
 
 		urb_priv->td_cnt++;
 		/* Giveback the urb when all the tds are completed */
-		if (urb_priv->td_cnt == urb_priv->length)
+		if (urb_priv->td_cnt == urb_priv->length) {
 			ret = 1;
+			if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+				xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
+				if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs
+					== 0) {
+					if (xhci->quirks & XHCI_AMD_PLL_FIX)
+						usb_amd_quirk_pll_enable();
+				}
+			}
+		}
 	}
 
 	return ret;
@@ -1675,71 +1702,52 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	struct urb_priv *urb_priv;
 	int idx;
 	int len = 0;
-	int skip_td = 0;
 	union xhci_trb *cur_trb;
 	struct xhci_segment *cur_seg;
+	struct usb_iso_packet_descriptor *frame;
 	u32 trb_comp_code;
+	bool skip_td = false;
 
 	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
 	trb_comp_code = GET_COMP_CODE(event->transfer_len);
 	urb_priv = td->urb->hcpriv;
 	idx = urb_priv->td_cnt;
+	frame = &td->urb->iso_frame_desc[idx];
 
-	if (ep->skip) {
-		/* The transfer is partly done */
-		*status = -EXDEV;
-		td->urb->iso_frame_desc[idx].status = -EXDEV;
-	} else {
-		/* handle completion code */
-		switch (trb_comp_code) {
-		case COMP_SUCCESS:
-			td->urb->iso_frame_desc[idx].status = 0;
-			xhci_dbg(xhci, "Successful isoc transfer!\n");
-			break;
-		case COMP_SHORT_TX:
-			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-				td->urb->iso_frame_desc[idx].status =
-					 -EREMOTEIO;
-			else
-				td->urb->iso_frame_desc[idx].status = 0;
-			break;
-		case COMP_BW_OVER:
-			td->urb->iso_frame_desc[idx].status = -ECOMM;
-			skip_td = 1;
-			break;
-		case COMP_BUFF_OVER:
-		case COMP_BABBLE:
-			td->urb->iso_frame_desc[idx].status = -EOVERFLOW;
-			skip_td = 1;
-			break;
-		case COMP_STALL:
-			td->urb->iso_frame_desc[idx].status = -EPROTO;
-			skip_td = 1;
-			break;
-		case COMP_STOP:
-		case COMP_STOP_INVAL:
-			break;
-		default:
-			td->urb->iso_frame_desc[idx].status = -1;
-			break;
-		}
-	}
-
-	/* calc actual length */
-	if (ep->skip) {
-		td->urb->iso_frame_desc[idx].actual_length = 0;
-		/* Update ring dequeue pointer */
-		while (ep_ring->dequeue != td->last_trb)
-			inc_deq(xhci, ep_ring, false);
-		inc_deq(xhci, ep_ring, false);
-		return finish_td(xhci, td, event_trb, event, ep, status, true);
+	/* handle completion code */
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		frame->status = 0;
+		xhci_dbg(xhci, "Successful isoc transfer!\n");
+		break;
+	case COMP_SHORT_TX:
+		frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
+				-EREMOTEIO : 0;
+		break;
+	case COMP_BW_OVER:
+		frame->status = -ECOMM;
+		skip_td = true;
+		break;
+	case COMP_BUFF_OVER:
+	case COMP_BABBLE:
+		frame->status = -EOVERFLOW;
+		skip_td = true;
+		break;
+	case COMP_STALL:
+		frame->status = -EPROTO;
+		skip_td = true;
+		break;
+	case COMP_STOP:
+	case COMP_STOP_INVAL:
+		break;
+	default:
+		frame->status = -1;
+		break;
 	}
 
-	if (trb_comp_code == COMP_SUCCESS || skip_td == 1) {
-		td->urb->iso_frame_desc[idx].actual_length =
-			td->urb->iso_frame_desc[idx].length;
-		td->urb->actual_length +=
-			td->urb->iso_frame_desc[idx].length;
+	if (trb_comp_code == COMP_SUCCESS || skip_td) {
+		frame->actual_length = frame->length;
+		td->urb->actual_length += frame->length;
 	} else {
 		for (cur_trb = ep_ring->dequeue,
 		     cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
@@ -1755,7 +1763,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 			TRB_LEN(event->transfer_len);
 
 		if (trb_comp_code != COMP_STOP_INVAL) {
-			td->urb->iso_frame_desc[idx].actual_length = len;
+			frame->actual_length = len;
 			td->urb->actual_length += len;
 		}
 	}
@@ -1766,6 +1774,35 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	return finish_td(xhci, td, event_trb, event, ep, status, false);
 }
 
+static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
+			struct xhci_transfer_event *event,
+			struct xhci_virt_ep *ep, int *status)
+{
+	struct xhci_ring *ep_ring;
+	struct urb_priv *urb_priv;
+	struct usb_iso_packet_descriptor *frame;
+	int idx;
+
+	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+	urb_priv = td->urb->hcpriv;
+	idx = urb_priv->td_cnt;
+	frame = &td->urb->iso_frame_desc[idx];
+
+	/* The transfer is partly done */
+	*status = -EXDEV;
+	frame->status = -EXDEV;
+
+	/* calc actual length */
+	frame->actual_length = 0;
+
+	/* Update ring dequeue pointer */
+	while (ep_ring->dequeue != td->last_trb)
+		inc_deq(xhci, ep_ring, false);
+	inc_deq(xhci, ep_ring, false);
+
+	return finish_td(xhci, td, NULL, event, ep, status, true);
+}
+
 /*
  * Process bulk and interrupt tds, update urb status and actual_length.
  */
@@ -2024,36 +2061,42 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		}
 
 		td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+
 		/* Is this a TRB in the currently executing TD? */
 		event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
 				td->last_trb, event_dma);
-		if (event_seg && ep->skip) {
+		if (!event_seg) {
+			if (!ep->skip ||
+			    !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
+				/* HC is busted, give up! */
+				xhci_err(xhci,
+					"ERROR Transfer event TRB DMA ptr not "
+					"part of current TD\n");
+				return -ESHUTDOWN;
+			}
+
+			ret = skip_isoc_td(xhci, td, event, ep, &status);
+			goto cleanup;
+		}
+
+		if (ep->skip) {
 			xhci_dbg(xhci, "Found td. Clear skip flag.\n");
 			ep->skip = false;
 		}
-		if (!event_seg &&
-		   (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) {
-			/* HC is busted, give up! */
-			xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not "
-					"part of current TD\n");
-			return -ESHUTDOWN;
-		}
 
-		if (event_seg) {
-			event_trb = &event_seg->trbs[(event_dma -
-					 event_seg->dma) / sizeof(*event_trb)];
-			/*
-			 * No-op TRB should not trigger interrupts.
-			 * If event_trb is a no-op TRB, it means the
-			 * corresponding TD has been cancelled. Just ignore
-			 * the TD.
-			 */
-			if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK)
-					 == TRB_TYPE(TRB_TR_NOOP)) {
-				xhci_dbg(xhci, "event_trb is a no-op TRB. "
-						"Skip it\n");
-				goto cleanup;
-			}
+		event_trb = &event_seg->trbs[(event_dma - event_seg->dma) /
+						sizeof(*event_trb)];
+		/*
+		 * No-op TRB should not trigger interrupts.
+		 * If event_trb is a no-op TRB, it means the
+		 * corresponding TD has been cancelled. Just ignore
+		 * the TD.
+		 */
+		if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK)
+				 == TRB_TYPE(TRB_TR_NOOP)) {
+			xhci_dbg(xhci,
+				 "event_trb is a no-op TRB. Skip it\n");
+			goto cleanup;
 		}
 
 		/* Now update the urb's actual_length and give back to
@@ -3126,6 +3169,12 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		}
 	}
 
+	if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
+		if (xhci->quirks & XHCI_AMD_PLL_FIX)
+			usb_amd_quirk_pll_disable();
+	}
+	xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
+
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
 			start_cycle, start_trb);
 	return 0;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 9a3645fd759..81b976e4588 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -550,6 +550,9 @@ void xhci_stop(struct usb_hcd *hcd)
 	del_timer_sync(&xhci->event_ring_timer);
 #endif
 
+	if (xhci->quirks & XHCI_AMD_PLL_FIX)
+		usb_amd_dev_put();
+
 	xhci_dbg(xhci, "// Disabling event ring interrupts\n");
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
 	xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
@@ -741,7 +744,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	int			retval;
 
 	/* Wait a bit if either of the roothubs need to settle from the
-	 * transistion into bus suspend.
+	 * transition into bus suspend.
 	 */
 	if (time_before(jiffies, xhci->bus_state[0].next_statechange) ||
 			time_before(jiffies,
@@ -771,7 +774,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* If restore operation fails, re-initialize the HC during resume */
 	if ((temp & STS_SRE) || hibernated) {
-		usb_root_hub_lost_power(hcd->self.root_hub);
+		/* Let the USB core know _both_ roothubs lost power. */
+		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
+		usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
 
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
@@ -2072,7 +2077,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
 		return -EINVAL;
 	}
 	vdev = xhci->devs[udev->slot_id];
-	/* Mark each endpoint as being in transistion, so
+	/* Mark each endpoint as being in transition, so
 	 * xhci_urb_enqueue() will reject all URBs.
 	 */
 	for (i = 0; i < num_eps; i++) {
@@ -2386,10 +2391,18 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Everything but endpoint 0 is disabled, so free or cache the rings. */
 	last_freed_endpoint = 1;
 	for (i = 1; i < 31; ++i) {
-		if (!virt_dev->eps[i].ring)
-			continue;
-		xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
-		last_freed_endpoint = i;
+		struct xhci_virt_ep *ep = &virt_dev->eps[i];
+
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			xhci_free_stream_info(xhci, ep->stream_info);
+			ep->stream_info = NULL;
+			ep->ep_state &= ~EP_HAS_STREAMS;
+		}
+
+		if (ep->ring) {
+			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+			last_freed_endpoint = i;
+		}
 	}
 	xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
 	xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 711de253bc0..ba1be6b7cc6 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -30,6 +30,7 @@
 
 /* Code sharing between pci-quirks and xhci hcd */
 #include	"xhci-ext-caps.h"
+#include "pci-quirks.h"
 
 /* xHCI PCI Configuration Registers */
 #define XHCI_SBRN_OFFSET	(0x60)
@@ -232,7 +233,7 @@ struct xhci_op_regs {
  * notification type that matches a bit set in this bit field.
  */
 #define	DEV_NOTE_MASK		(0xffff)
-#define ENABLE_DEV_NOTE(x)	(1 << x)
+#define ENABLE_DEV_NOTE(x)	(1 << (x))
 /* Most of the device notification types should only be used for debug.
  * SW does need to pay attention to function wake notifications.
  */
@@ -348,6 +349,9 @@ struct xhci_op_regs {
 /* Initiate a warm port reset - complete when PORT_WRC is '1' */
 #define PORT_WR		(1 << 31)
 
+/* We mark duplicate entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
 /* Port Power Management Status and Control - port_power_base bitmasks */
 /* Inactivity timer value for transitions into U1, in microseconds.
  * Timeout can be up to 127us.  0xFF means an infinite timeout.
@@ -601,11 +605,11 @@ struct xhci_ep_ctx {
 #define EP_STATE_STOPPED	3
 #define EP_STATE_ERROR		4
 /* Mult - Max number of burtst within an interval, in EP companion desc. */
-#define EP_MULT(p)		((p & 0x3) << 8)
+#define EP_MULT(p)		(((p) & 0x3) << 8)
 /* bits 10:14 are Max Primary Streams */
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
-#define EP_INTERVAL(p)		((p & 0xff) << 16)
+#define EP_INTERVAL(p)		(((p) & 0xff) << 16)
 #define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
 #define EP_MAXPSTREAMS_MASK	(0x1f << 10)
 #define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
@@ -873,7 +877,7 @@ struct xhci_transfer_event {
 #define COMP_CMD_ABORT	25
 /* Stopped - transfer was terminated by a stop endpoint command */
 #define COMP_STOP	26
-/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
+/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
 #define COMP_STOP_INVAL	27
 /* Control Abort Error - Debug Capability - control pipe aborted */
 #define COMP_DBG_ABORT	28
@@ -1276,6 +1280,7 @@ struct xhci_hcd {
 #define	XHCI_LINK_TRB_QUIRK	(1 << 0)
 #define XHCI_RESET_EP_QUIRK	(1 << 1)
 #define XHCI_NEC_HOST		(1 << 2)
+#define XHCI_AMD_PLL_FIX	(1 << 3)
 	/* There are two roothubs to keep track of bus suspend info for */
 	struct xhci_bus_state   bus_state[2];
 	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index c90c89dc000..a0037961e5b 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -69,7 +69,7 @@
  *	20000513 added IDs for all products supported by Windows driver (john)
  *	20000514 Rewrote mts_scsi_queuecommand to use URBs (john)
  *	20000514 Version 0.0.8j
- *      20000514 Fix reporting of non-existant devices to SCSI layer (john)
+ *      20000514 Fix reporting of non-existent devices to SCSI layer (john)
  *	20000514 Added MTS_DEBUG_INT (john)
  *	20000514 Changed "usb-microtek" to "microtek" for consistency (john)
  *	20000514 Stupid bug fixes (john)
@@ -557,14 +557,14 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
 
 	if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
 ) { 		pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
-		MTS_DEBUG( "transfering from desc->ep_image == %d\n",
+		MTS_DEBUG( "transferring from desc->ep_image == %d\n",
 			   (int)desc->ep_image );
 	} else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
 			pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
-			MTS_DEBUG( "transfering from desc->ep_response == %d\n",
+			MTS_DEBUG( "transferring from desc->ep_response == %d\n",
 				   (int)desc->ep_response);
 	} else {
-		MTS_DEBUG("transfering to desc->ep_out == %d\n",
+		MTS_DEBUG("transferring to desc->ep_out == %d\n",
 			  (int)desc->ep_out);
 		pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
 	}
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index e573e470401..a2190b983f5 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -40,7 +40,7 @@
 #ifdef CONFIG_USB_DYNAMIC_MINORS
 #define IOWARRIOR_MINOR_BASE	0
 #else
-#define IOWARRIOR_MINOR_BASE	208	// SKELETON_MINOR_BASE 192 + 16, not offical yet
+#define IOWARRIOR_MINOR_BASE	208	// SKELETON_MINOR_BASE 192 + 16, not official yet
 #endif
 
 /* interrupt input queue size */
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 4cbb7e4b368..74073b363c3 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -14,7 +14,7 @@ config USB_MUSB_HDRC
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
-	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
+	bool 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on the Mentor Graphics silicon IP.  Then
@@ -30,8 +30,8 @@ config USB_MUSB_HDRC
 
 	  If you do not know what this is, please say N.
 
-	  To compile this driver as a module, choose M here; the
-	  module will be called "musb-hdrc".
+#	  To compile this driver as a module, choose M here; the
+#	  module will be called "musb-hdrc".
 
 choice
 	prompt "Platform Glue Layer"
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 52312e8af21..8e2a1ff8a35 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -21,6 +21,7 @@
 #include <asm/cacheflush.h>
 
 #include "musb_core.h"
+#include "musbhsdma.h"
 #include "blackfin.h"
 
 struct bfin_glue {
@@ -332,6 +333,27 @@ static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
 	return -EIO;
 }
 
+static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len)
+{
+	struct musb_dma_channel *musb_channel = channel->private_data;
+
+	/*
+	 * Anomaly 05000450 might cause data corruption when using DMA
+	 * MODE 1 transmits with short packet.  So to work around this,
+	 * we truncate all MODE 1 transfers down to a multiple of the
+	 * max packet size, and then do the last short packet transfer
+	 * (if there is any) using MODE 0.
+	 */
+	if (ANOMALY_05000450) {
+		if (musb_channel->transmit && *mode == 1)
+			*len = *len - (*len % packet_sz);
+	}
+
+	return 0;
+}
+
 static void bfin_musb_reg_init(struct musb *musb)
 {
 	if (ANOMALY_05000346) {
@@ -430,6 +452,8 @@ static const struct musb_platform_ops bfin_ops = {
 
 	.vbus_status	= bfin_musb_vbus_status,
 	.set_vbus	= bfin_musb_set_vbus,
+
+	.adjust_channel_params = bfin_musb_adjust_channel_params,
 };
 
 static u64 bfin_dmamask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index de55a3c3259..ab434fbd8c3 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -597,12 +597,12 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
 		length = min(n_bds * maxpacket, length);
 	}
 
-	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u\n",
 			tx->index,
 			maxpacket,
 			rndis ? "rndis" : "transparent",
 			n_bds,
-			addr, length);
+			(unsigned long long)addr, length);
 
 	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
 
@@ -820,7 +820,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	length = min(n_bds * maxpacket, length);
 
 	DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
-			"dma 0x%x len %u %u/%u\n",
+			"dma 0x%llx len %u %u/%u\n",
 			rx->index, maxpacket,
 			onepacket
 				? (is_rndis ? "rndis" : "onepacket")
@@ -829,7 +829,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 			musb_readl(tibase,
 				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
 					& 0xffff,
-			addr, length, rx->channel.actual_len, rx->buf_len);
+			(unsigned long long)addr, length,
+			rx->channel.actual_len, rx->buf_len);
 
 	/* only queue one segment at a time, since the hardware prevents
 	 * correct queue shutdown after unexpected short packets
@@ -1039,9 +1040,9 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 		if (!completed && (bd->hw_options & CPPI_OWN_SET))
 			break;
 
-		DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+		DBG(5, "C/RXBD %llx: nxt %08x buf %08x "
 			"off.len %08x opt.len %08x (%d)\n",
-			bd->dma, bd->hw_next, bd->hw_bufp,
+			(unsigned long long)bd->dma, bd->hw_next, bd->hw_bufp,
 			bd->hw_off_len, bd->hw_options,
 			rx->channel.actual_len);
 
@@ -1111,11 +1112,12 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 		musb_ep_select(cppi->mregs, rx->index + 1);
 		csr = musb_readw(regs, MUSB_RXCSR);
 		if (csr & MUSB_RXCSR_DMAENAB) {
-			DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+			DBG(4, "list%d %p/%p, last %llx%s, csr %04x\n",
 				rx->index,
 				rx->head, rx->tail,
 				rx->last_processed
-					? rx->last_processed->dma
+					? (unsigned long long)
+						rx->last_processed->dma
 					: 0,
 				completed ? ", completed" : "",
 				csr);
@@ -1167,8 +1169,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 	tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
 	rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
 
-	if (!tx && !rx)
+	if (!tx && !rx) {
+		if (cppi->irq)
+			spin_unlock_irqrestore(&musb->lock, flags);
 		return IRQ_NONE;
+	}
 
 	DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
 
@@ -1199,7 +1204,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 		 */
 		if (NULL == bd) {
 			DBG(1, "null BD\n");
-			tx_ram->tx_complete = 0;
+			musb_writel(&tx_ram->tx_complete, 0, 0);
 			continue;
 		}
 
@@ -1452,7 +1457,7 @@ static int cppi_channel_abort(struct dma_channel *channel)
 		 *    compare mode by writing 1 to the tx_complete register.
 		 */
 		cppi_reset_tx(tx_ram, 1);
-		cppi_ch->head = 0;
+		cppi_ch->head = NULL;
 		musb_writel(&tx_ram->tx_complete, 0, 1);
 		cppi_dump_tx(5, cppi_ch, " (done teardown)");
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 630ae7f3cd4..f10ff00ca09 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1030,6 +1030,7 @@ static void musb_shutdown(struct platform_device *pdev)
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 	unsigned long	flags;
 
+	pm_runtime_get_sync(musb->controller);
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
@@ -1040,6 +1041,7 @@ static void musb_shutdown(struct platform_device *pdev)
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 	musb_platform_exit(musb);
 
+	pm_runtime_put(musb->controller);
 	/* FIXME power down */
 }
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 4bd9e2145ee..0e053b58796 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -261,6 +261,7 @@ enum musb_g_ep0_state {
  * @try_ilde:	tries to idle the IP
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
+ * @channel_program: pre check for standard dma channel_program func
  */
 struct musb_platform_ops {
 	int	(*init)(struct musb *musb);
@@ -274,6 +275,10 @@ struct musb_platform_ops {
 
 	int	(*vbus_status)(struct musb *musb);
 	void	(*set_vbus)(struct musb *musb, int on);
+
+	int	(*adjust_channel_params)(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len);
 };
 
 /*
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 98519c5d8b5..f47c20197c6 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -535,7 +535,7 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 			is_dma = 1;
 			csr |= MUSB_TXCSR_P_WZC_BITS;
 			csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
-				 MUSB_TXCSR_TXPKTRDY);
+				 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* Ensure writebuffer is empty. */
 			csr = musb_readw(epio, MUSB_TXCSR);
@@ -1296,7 +1296,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
 	}
 
 	/* if the hardware doesn't have the request, easy ... */
-	if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+	if (musb_ep->req_list.next != &req->list || musb_ep->busy)
 		musb_g_giveback(musb_ep, request, -ECONNRESET);
 
 	/* ... else abort the dma transfer ... */
@@ -1887,11 +1887,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 			otg_set_vbus(musb->xceiv, 1);
 
 		hcd->self.uses_pio_for_control = 1;
-
-		if (musb->xceiv->last_event == USB_EVENT_NONE)
-			pm_runtime_put(musb->controller);
-
 	}
+	if (musb->xceiv->last_event == USB_EVENT_NONE)
+		pm_runtime_put(musb->controller);
 
 	return 0;
 
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 0144a2d481f..d281792db05 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -169,6 +169,14 @@ static int dma_channel_program(struct dma_channel *channel,
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
+	/* Let targets check/tweak the arguments */
+	if (musb->ops->adjust_channel_params) {
+		int ret = musb->ops->adjust_channel_params(channel,
+			packet_sz, &mode, &dma_addr, &len);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * The DMA engine in RTL1.8 and above cannot handle
 	 * DMA addresses that are not aligned to a 4 byte boundary.
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 25cb8b0003b..e9e60b6e058 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -259,9 +259,10 @@ static int musb_otg_notifications(struct notifier_block *nb,
 	case USB_EVENT_VBUS:
 		DBG(4, "VBUS Connect\n");
 
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 		if (musb->gadget_driver)
 			pm_runtime_get_sync(musb->controller);
-
+#endif
 		otg_init(musb->xceiv);
 		break;
 
@@ -269,7 +270,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
 		DBG(4, "VBUS Disconnect\n");
 
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
-		if (is_otg_enabled(musb))
+		if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
 			if (musb->gadget_driver)
 #endif
 			{
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index d6384e4aeef..f7e04bf34a1 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -93,6 +93,8 @@ static int __init ux500_probe(struct platform_device *pdev)
 	}
 
 	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= pdev->dev.dma_mask;
+	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c6fdef61d1..e25700f44b6 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1531,7 +1531,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	i2c_set_clientdata(i2c, isp);
 	isp->client = i2c;
 
-	/* verify the chip (shouldn't be necesary) */
+	/* verify the chip (shouldn't be necessary) */
 	status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
 	if (status != I2C_VENDOR_ID_PHILIPS) {
 		dev_dbg(&i2c->dev, "not philips id: %d\n", status);
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index 7f9b8cd4514..e973ff19c55 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -580,7 +580,7 @@ static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers)
 		time = TB_BUS_SUSPEND;
 		break;
 	default:
-		dev_dbg(lnw->dev, "unkown timer, cannot enable it\n");
+		dev_dbg(lnw->dev, "unknown timer, cannot enable it\n");
 		return;
 	}
 
@@ -1381,7 +1381,7 @@ static void langwell_otg_work(struct work_struct *work)
 			} else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
 					iotg->otg.host->b_hnp_enable) {
 				/* It is not safe enough to do a fast
-				 * transistion from A_WAIT_BCON to
+				 * transition from A_WAIT_BCON to
 				 * A_SUSPEND */
 				msleep(10000);
 				if (iotg->hsm.a_bus_req)
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 0db6ace16f7..aba201cb872 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -16,7 +16,7 @@
  * When reading the process is almost equal except that the header starts with
  * 0x00 0x20.
  *
- * The device simply need some stuff to understand data comming from the usb
+ * The device simply need some stuff to understand data coming from the usb
  * buffer: The First and Second byte is used for a Header, the Third and Fourth
  * tells the  device the amount of information the package holds.
  * Packages are 60 bytes long Header Stuff.
@@ -30,7 +30,7 @@
  * one.
  *
  * The driver registers himself with the USB-serial core and the USB Core. I had
- * to implement a probe function agains USB-serial, because other way, the
+ * to implement a probe function against USB-serial, because other way, the
  * driver was attaching himself to both interfaces. I have tryed with different
  * configurations of usb_serial_driver with out exit, only the probe function
  * could handle this correctly.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4df3e0cecba..0f11afdda13 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -101,7 +101,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
-	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
+	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 987e9bf7bd0..d9906eb9d16 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -35,7 +35,7 @@
  *
  *  Lonnie Mendez <dignome@gmail.com>
  *  04-10-2004
- *	Driver modified to support dynamic line settings.  Various improvments
+ *	Driver modified to support dynamic line settings.  Various improvements
  *      and features.
  *
  *  Neil Whelchel
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 65967b36365..4de6ef0ae52 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -17,7 +17,7 @@
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
- * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
+ * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
  *	and extra documentation
  *
  * Change entries from 2004 and earlier can be found in versions of this
@@ -151,6 +151,8 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
  * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
  */
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
@@ -525,6 +527,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
 	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
+	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
@@ -787,6 +790,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index c543e55bafb..efffc23723b 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -300,6 +300,8 @@
  * Hameg HO820 and HO870 interface (using VID 0x0403)
  */
 #define HAMEG_HO820_PID			0xed74
+#define HAMEG_HO730_PID			0xed73
+#define HAMEG_HO720_PID			0xed72
 #define HAMEG_HO870_PID			0xed71
 
 /*
@@ -572,6 +574,7 @@
 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID		0x0103	/* OCT DK201 USB docking station */
 #define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
 
 /*
@@ -1141,3 +1144,12 @@
 #define QIHARDWARE_VID			0x20B7
 #define MILKYMISTONE_JTAGSERIAL_PID	0x0713
 
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID	0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID	0xF60B
+
+
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f1aedfa7c42..abf095be575 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1981,7 +1981,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 	if (code == IOSP_STATUS_OPEN_RSP) {
 		edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
 		edge_port->maxTxCredits = edge_port->txCredits;
-		dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+		dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
 		handle_new_msr(edge_port, byte2);
 
 		/* send the current line settings to the port so we are
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index dced7ec6547..ad9c1d47a61 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -68,7 +68,7 @@ struct comMapper {
 #define PROC_SET_COM_ENTRY		2
 
 
-/* The following sturcture is passed to the write */
+/* The following structure is passed to the write */
 struct procWrite {
 	int	Command;
 	union {
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d8434910fa7..0aac00afb5c 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -433,7 +433,7 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 
 	/* We can only send a maximum of 1 aligned byte page at a time */
 
-	/* calulate the number of bytes left in the first page */
+	/* calculate the number of bytes left in the first page */
 	write_length = EPROM_PAGE_SIZE -
 				(start_address & (EPROM_PAGE_SIZE - 1));
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d2c019637e4..ba0d28727cc 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -106,7 +106,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
 static int  mct_u232_tiocmget(struct tty_struct *tty);
 static int  mct_u232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
-static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int  mct_u232_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static int  mct_u232_get_icount(struct tty_struct *tty,
 			struct serial_icounter_struct *icount);
@@ -874,7 +874,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int  mct_u232_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	DEFINE_WAIT(wait);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 201f6096844..1b5633f4698 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -116,7 +116,7 @@ static void opticon_read_bulk_callback(struct urb *urb)
 		} else {
 			if ((data[0] == 0x00) && (data[1] == 0x01)) {
 				spin_lock_irqsave(&priv->lock, flags);
-				/* CTS status infomation package */
+				/* CTS status information package */
 				if (data[2] == 0x00)
 					priv->cts = false;
 				else
@@ -413,7 +413,7 @@ static int opticon_tiocmget(struct tty_struct *tty)
 	return result;
 }
 
-static int opticon_tiocmset(struct tty_struct *tty, struct file *file,
+static int opticon_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 75c7f456eed..d77ff043589 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -407,6 +407,10 @@ static void option_instat_callback(struct urb *urb);
 /* ONDA MT825UP HSDPA 14.2 modem */
 #define ONDA_MT825UP         0x000b
 
+/* Samsung products */
+#define SAMSUNG_VENDOR_ID                       0x04e8
+#define SAMSUNG_PRODUCT_GT_B3730                0x6889
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -968,6 +972,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730/GT-B3710 LTE USB modem.*/
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 8858201eb1d..54a9dab1f33 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -111,7 +111,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	ifnum = intf->desc.bInterfaceNumber;
 	dbg("This Interface = %d", ifnum);
 
-	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
+	data = kzalloc(sizeof(struct usb_wwan_intf_private),
 					 GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -134,8 +134,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
 			dbg("QDL port found");
 
-			if (serial->interface->num_altsetting == 1)
-				return 0;
+			if (serial->interface->num_altsetting == 1) {
+				retval = 0; /* Success */
+				break;
+			}
 
 			retval = usb_set_interface(serial->dev, ifnum, 1);
 			if (retval < 0) {
@@ -145,7 +147,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 				retval = -ENODEV;
 				kfree(data);
 			}
-			return retval;
 		}
 		break;
 
@@ -166,6 +167,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 		} else if (ifnum == 2) {
 			dbg("Modem port found");
@@ -177,7 +179,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 				retval = -ENODEV;
 				kfree(data);
 			}
-			return retval;
 		} else if (ifnum==3) {
 			/*
 			 * NMEA (serial line 9600 8N1)
@@ -191,6 +192,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 		}
 		break;
@@ -199,12 +201,27 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		dev_err(&serial->dev->dev,
 			"unknown number of interfaces: %d\n", nintf);
 		kfree(data);
-		return -ENODEV;
+		retval = -ENODEV;
 	}
 
+	/* Set serial->private if not returning -ENODEV */
+	if (retval != -ENODEV)
+		usb_set_serial_data(serial, data);
 	return retval;
 }
 
+static void qc_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	dbg("%s", __func__);
+
+	/* Call usb_wwan release & free the private data allocated in qcprobe */
+	usb_wwan_release(serial);
+	usb_set_serial_data(serial, NULL);
+	kfree(priv);
+}
+
 static struct usb_serial_driver qcdevice = {
 	.driver = {
 		.owner     = THIS_MODULE,
@@ -222,7 +239,7 @@ static struct usb_serial_driver qcdevice = {
 	.chars_in_buffer     = usb_wwan_chars_in_buffer,
 	.attach		     = usb_wwan_startup,
 	.disconnect	     = usb_wwan_disconnect,
-	.release	     = usb_wwan_release,
+	.release	     = qc_release,
 #ifdef CONFIG_PM
 	.suspend	     = usb_wwan_suspend,
 	.resume		     = usb_wwan_resume,
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 08e03745e25..0e5aafda453 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -562,7 +562,7 @@ static int ene_sd_init(struct us_data *us)
 
 	result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
 	if (result != USB_STOR_XFER_GOOD) {
-		US_DEBUGP("Exection SD Init Code Fail !!\n");
+		US_DEBUGP("Execution SD Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -581,7 +581,7 @@ static int ene_sd_init(struct us_data *us)
 
 	result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
 	if (result != USB_STOR_XFER_GOOD) {
-		US_DEBUGP("Exection SD Init Code Fail !!\n");
+		US_DEBUGP("Execution SD Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 6b9982cd542..ffc4193e950 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -499,7 +499,6 @@ static int isd200_action( struct us_data *us, int action,
 	memset(&ata, 0, sizeof(ata));
 	srb->cmnd = info->cmnd;
 	srb->device = &srb_dev;
-	++srb->serial_number;
 
 	ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
 	ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
@@ -1510,7 +1509,7 @@ static int isd200_Initialization(struct us_data *us)
  * Protocol and Transport for the ISD200 ASIC
  *
  * This protocol and transport are for ATA devices connected to an ISD200
- * ASIC.  An ATAPI device that is conected as a slave device will be
+ * ASIC.  An ATAPI device that is connected as a slave device will be
  * detected in the driver initialization function and the protocol will
  * be changed to an ATAPI protocol (Transparent SCSI).
  *
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 689ee1fb702..13b8bcdf3db 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -123,7 +123,7 @@ static int slave_configure(struct scsi_device *sdev)
 {
 	struct us_data *us = host_to_us(sdev->host);
 
-	/* Many devices have trouble transfering more than 32KB at a time,
+	/* Many devices have trouble transferring more than 32KB at a time,
 	 * while others have trouble with more than 64K. At this time we
 	 * are limiting both to 32K (64 sectores).
 	 */
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index bd3f415893d..0b00091d2ae 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -340,7 +340,7 @@ static int usbat_check_status(struct us_data *us)
 }
 
 /*
- * Stores critical information in internal registers in prepartion for the execution
+ * Stores critical information in internal registers in preparation for the execution
  * of a conditional usbat_read_blocks or usbat_write_blocks call.
  */
 static int usbat_set_shuttle_features(struct us_data *us,
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 827c87f10cc..7e4bf95f8f7 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -180,7 +180,7 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
  *     using the 14 bytes of @a to fill up
  *     b1.{mac_header,e0,security_reserved,padding}.
  *
- * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of
+ * NOTE: The definition of l(a) in WUSB1.0[6.5] vs the definition of
  *       l(m) is orthogonal, they bear no relationship, so it is not
  *       in conflict with the parameter's relation that
  *       WUSB1.0[6.4.2]) defines.
@@ -272,7 +272,7 @@ static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc,
 
 	/* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5]
 	 * The procedure is to AES crypt the A0 block and XOR the MIC
-	 * Tag agains it; we only do the first 8 bytes and place it
+	 * Tag against it; we only do the first 8 bytes and place it
 	 * directly in the destination buffer.
 	 *
 	 * POS Crypto API: size is assumed to be AES's block size.
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c
index 4ed97360c04..6f4fafdc240 100644
--- a/drivers/usb/wusbcore/reservation.c
+++ b/drivers/usb/wusbcore/reservation.c
@@ -71,7 +71,7 @@ static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv)
 
 /**
  * wusbhc_rsv_establish - establish a reservation for the cluster
- * @wusbhc: the WUSB HC requesting a bandwith reservation
+ * @wusbhc: the WUSB HC requesting a bandwidth reservation
  */
 int wusbhc_rsv_establish(struct wusbhc *wusbhc)
 {
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index c175b7300c7..39de3900ad2 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -133,7 +133,7 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
  *           big of a problem [and we can't make it an spinlock
  *           because other parts need to take it and sleep] .
  *
- *           @usb_hcd is refcounted, so it won't dissapear under us
+ *           @usb_hcd is refcounted, so it won't disappear under us
  *           and before killing a host, the polling of the root hub
  *           would be stopped anyway.
  */
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index 8cb9d80207f..ca80171f42c 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -24,7 +24,7 @@
  *
  * RPIPE
  *
- *   Targetted at different downstream endpoints
+ *   Targeted at different downstream endpoints
  *
  *   Descriptor: use to config the remote pipe.
  *
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 84b744c428a..6ccd93a9b90 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -61,7 +61,7 @@
  *
  *     Two methods it could be done:
  *
- *     (a) set up a timer everytime an rpipe's use count drops to 1
+ *     (a) set up a timer every time an rpipe's use count drops to 1
  *         (which means unused) or when a transfer ends. Reset the
  *         timer when a xfer is queued. If the timer expires, release
  *         the rpipe [see rpipe_ep_disable()].
@@ -140,7 +140,7 @@ struct wa_xfer {
 
 	struct wahc *wa;		/* Wire adapter we are plugged to */
 	struct usb_host_endpoint *ep;
-	struct urb *urb;		/* URB we are transfering for */
+	struct urb *urb;		/* URB we are transferring for */
 	struct wa_seg **seg;		/* transfer segments */
 	u8 segs, segs_submitted, segs_done;
 	unsigned is_inbound:1;
@@ -161,7 +161,7 @@ static inline void wa_xfer_init(struct wa_xfer *xfer)
 }
 
 /*
- * Destory a transfer structure
+ * Destroy a transfer structure
  *
  * Note that the xfer->seg[index] thingies follow the URB life cycle,
  * so we need to put them, not free them.
@@ -494,7 +494,7 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
  * function does almost the same thing and they work closely
  * together.
  *
- * If the seg request has failed but this DTO phase has suceeded,
+ * If the seg request has failed but this DTO phase has succeeded,
  * wa_seg_cb() has already failed the segment and moved the
  * status to WA_SEG_ERROR, so this will go through 'case 0' and
  * effectively do nothing.
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 6bd426b7ec0..3a2d09162e7 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -231,7 +231,7 @@ struct wusb_port {
  *
  *    Most of the times when you need to use it, it will be non-NULL,
  *    so there is no real need to check for it (wusb_dev will
- *    dissapear before usb_dev).
+ *    disappear before usb_dev).
  *
  *  - The following fields need to be filled out before calling
  *    wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}.
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
index 08bd6dbfd4a..3e5454aba5d 100644
--- a/drivers/uwb/driver.c
+++ b/drivers/uwb/driver.c
@@ -61,7 +61,7 @@
 
 
 /**
- * If a beacon dissapears for longer than this, then we consider the
+ * If a beacon disappears for longer than this, then we consider the
  * device who was represented by that beacon to be gone.
  *
  * ECMA-368[17.2.3, last para] establishes that a device must not
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
index a8d83e25e3b..3fbcf789dfa 100644
--- a/drivers/uwb/drp.c
+++ b/drivers/uwb/drp.c
@@ -27,7 +27,7 @@
 
 /* DRP Conflict Actions ([ECMA-368 2nd Edition] 17.4.6) */
 enum uwb_drp_conflict_action {
-	/* Reservation is mantained, no action needed */
+	/* Reservation is maintained, no action needed */
 	UWB_DRP_CONFLICT_MANTAIN = 0,
 	
 	/* the device shall not transmit frames in conflicting MASs in
@@ -741,12 +741,12 @@ void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
  * DRP notifications can occur for three different reasons:
  *
  * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as
- *   the target or source have been recieved.
+ *   the target or source have been received.
  *
  *   These DRP IEs could be new or for an existing reservation.
  *
  *   If the DRP IE for an existing reservation ceases to be to
- *   recieved for at least mMaxLostBeacons, the reservation should be
+ *   received for at least mMaxLostBeacons, the reservation should be
  *   considered to be terminated.  Note that the TERMINATE reason (see
  *   below) may not always be signalled (e.g., the remote device has
  *   two or more reservations established with the RC).
diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c
index b0091c771b9..b4395f41a00 100644
--- a/drivers/uwb/lc-rc.c
+++ b/drivers/uwb/lc-rc.c
@@ -168,7 +168,7 @@ int uwb_rc_mac_addr_setup(struct uwb_rc *rc)
 	}
 
 	if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) {
-		addr.data[0] = 0x02; /* locally adminstered and unicast */
+		addr.data[0] = 0x02; /* locally administered and unicast */
 		get_random_bytes(&addr.data[1], sizeof(addr.data)-1);
 
 		result = uwb_rc_mac_addr_set(rc, &addr);
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
index 27849292b55..3de630b0f69 100644
--- a/drivers/uwb/reset.c
+++ b/drivers/uwb/reset.c
@@ -52,7 +52,7 @@ const char *__strerror[] = {
 	"cancelled",
 	"invalid state",
 	"invalid size",
-	"ack not recieved",
+	"ack not received",
 	"no more asie notification",
 };
 
diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c
index ccd2184e05d..b2948ec5787 100644
--- a/drivers/uwb/umc-dev.c
+++ b/drivers/uwb/umc-dev.c
@@ -78,7 +78,7 @@ EXPORT_SYMBOL_GPL(umc_device_register);
  * First we unregister the device, make sure the driver can do it's
  * resource release thing and then we try to release any left over
  * resources. We take a ref to the device, to make sure it doesn't
- * dissapear under our feet.
+ * disappear under our feet.
  */
 void umc_device_unregister(struct umc_dev *umc)
 {
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 2ab29124163..7aa4eea930f 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -4,7 +4,7 @@
  * Author: Michael S. Tsirkin <mst@redhat.com>
  *
  * Inspiration, some code, and most witty comments come from
- * Documentation/lguest/lguest.c, by Rusty Russell
+ * Documentation/virtual/lguest/lguest.c, by Rusty Russell
  *
  * This work is licensed under the terms of the GNU GPL, version 2.
  *
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 82acb8dc4aa..6183a57eb69 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -66,7 +66,7 @@
  * have.  Allow 1% either way on the nominal for TVs.
  */
 #define NR_MONTYPES	6
-static struct fb_monspecs monspecs[NR_MONTYPES] __initdata = {
+static struct fb_monspecs monspecs[NR_MONTYPES] __devinitdata = {
 	{	/* TV		*/
 		.hfmin	= 15469,
 		.hfmax	= 15781,
@@ -873,7 +873,7 @@ static struct fb_ops acornfb_ops = {
 /*
  * Everything after here is initialisation!!!
  */
-static struct fb_videomode modedb[] __initdata = {
+static struct fb_videomode modedb[] __devinitdata = {
 	{	/* 320x256 @ 50Hz */
 		NULL, 50,  320,  256, 125000,  92,  62,  35, 19,  38, 2,
 		FB_SYNC_COMP_HIGH_ACT,
@@ -925,8 +925,7 @@ static struct fb_videomode modedb[] __initdata = {
 	}
 };
 
-static struct fb_videomode __initdata
-acornfb_default_mode = {
+static struct fb_videomode acornfb_default_mode __devinitdata = {
 	.name =		NULL,
 	.refresh =	60,
 	.xres =		640,
@@ -942,7 +941,7 @@ acornfb_default_mode = {
 	.vmode =	FB_VMODE_NONINTERLACED
 };
 
-static void __init acornfb_init_fbinfo(void)
+static void __devinit acornfb_init_fbinfo(void)
 {
 	static int first = 1;
 
@@ -1018,8 +1017,7 @@ static void __init acornfb_init_fbinfo(void)
  *	size can optionally be followed by 'M' or 'K' for
  *	MB or KB respectively.
  */
-static void __init
-acornfb_parse_mon(char *opt)
+static void __devinit acornfb_parse_mon(char *opt)
 {
 	char *p = opt;
 
@@ -1066,8 +1064,7 @@ bad:
 	current_par.montype = -1;
 }
 
-static void __init
-acornfb_parse_montype(char *opt)
+static void __devinit acornfb_parse_montype(char *opt)
 {
 	current_par.montype = -2;
 
@@ -1108,8 +1105,7 @@ acornfb_parse_montype(char *opt)
 	}
 }
 
-static void __init
-acornfb_parse_dram(char *opt)
+static void __devinit acornfb_parse_dram(char *opt)
 {
 	unsigned int size;
 
@@ -1134,15 +1130,14 @@ acornfb_parse_dram(char *opt)
 static struct options {
 	char *name;
 	void (*parse)(char *opt);
-} opt_table[] __initdata = {
+} opt_table[] __devinitdata = {
 	{ "mon",     acornfb_parse_mon     },
 	{ "montype", acornfb_parse_montype },
 	{ "dram",    acornfb_parse_dram    },
 	{ NULL, NULL }
 };
 
-int __init
-acornfb_setup(char *options)
+static int __devinit acornfb_setup(char *options)
 {
 	struct options *optp;
 	char *opt;
@@ -1179,8 +1174,7 @@ acornfb_setup(char *options)
  * Detect type of monitor connected
  *  For now, we just assume SVGA
  */
-static int __init
-acornfb_detect_monitortype(void)
+static int __devinit acornfb_detect_monitortype(void)
 {
 	return 4;
 }
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 5b2b5ef4edb..64e41f5448c 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -3117,7 +3117,7 @@ int __init atafb_init(void)
 			atafb_ops.fb_setcolreg = &falcon_setcolreg;
 			error = request_irq(IRQ_AUTO_4, falcon_vbl_switcher,
 					    IRQ_TYPE_PRIO,
-					    "framebuffer/modeswitch",
+					    "framebuffer:modeswitch",
 					    falcon_vbl_switcher);
 			if (error)
 				return error;
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index ccecf997458..4484c721f0f 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -637,7 +637,7 @@ static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitf
  *  	magnitude which needs to be scaled in this function for the hardware.
  *	Things to take into consideration are how many color registers, if
  *	any, are supported with the current color visual. With truecolor mode
- *	no color palettes are supported. Here a psuedo palette is created
+ *	no color palettes are supported. Here a pseudo palette is created
  *	which we store the value in pseudo_palette in struct fb_info. For
  *	pseudocolor mode we have a limited color palette. To deal with this
  *	we can program what color is displayed for a particular pixel value.
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index d437b3daf1f..ebb893c49e9 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3124,12 +3124,12 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
 		M = pll_regs[2];
 
 		/*
-		 * PLL Feedback Divider N (Dependant on CLOCK_CNTL):
+		 * PLL Feedback Divider N (Dependent on CLOCK_CNTL):
 		 */
 		N = pll_regs[7 + (clock_cntl & 3)];
 
 		/*
-		 * PLL Post Divider P (Dependant on CLOCK_CNTL):
+		 * PLL Post Divider P (Dependent on CLOCK_CNTL):
 		 */
 		P = 1 << (pll_regs[6] >> ((clock_cntl & 3) << 1));
 
diff --git a/drivers/video/aty/mach64_cursor.c b/drivers/video/aty/mach64_cursor.c
index 2ba8b3c421a..46f72ed5351 100644
--- a/drivers/video/aty/mach64_cursor.c
+++ b/drivers/video/aty/mach64_cursor.c
@@ -51,7 +51,7 @@
  * to a larger number and saturate CUR_HORZ_POSN to zero.
  *
  * if Y becomes negative, CUR_VERT_OFFSET must be adjusted to a larger number,
- * CUR_OFFSET must be adjusted to a point to the appropraite line in the cursor
+ * CUR_OFFSET must be adjusted to a point to the appropriate line in the cursor
  * definitation and CUR_VERT_POSN must be saturated to zero.
  */
 
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 4ea187d9376..5dff32ac804 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1572,7 +1572,7 @@ static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
 	/* Copy monitor specs from panel data */
 	/* fixme: we're setting up LCD controller windows, so these dont give a
 	damn as to what the monitor specs are (the panel itself does, but that
-	isnt done here...so maybe need a generic catchall monitor setting??? */
+	isn't done here...so maybe need a generic catchall monitor setting??? */
 	memcpy(&fbi->monspecs, &panel->monspecs, sizeof(struct fb_monspecs));
 
 	/* We first try the user mode passed in argument. If that failed,
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index af6098396fe..c6533bad26f 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -109,7 +109,7 @@ static unsigned long corgibl_flags;
 #define CORGIBL_BATTLOW       0x02
 
 /*
- * This is only a psuedo I2C interface. We can't use the standard kernel
+ * This is only a pseudo I2C interface. We can't use the standard kernel
  * routines as the interface is write only. We just assume the data is acked...
  */
 static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data)
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
index bbca3127071..be20b5cbe26 100644
--- a/drivers/video/backlight/locomolcd.c
+++ b/drivers/video/backlight/locomolcd.c
@@ -6,7 +6,7 @@
  * GPL v2
  *
  * This driver assumes single CPU. That's okay, because collie is
- * slightly old hardware, and noone is going to retrofit second CPU to
+ * slightly old hardware, and no one is going to retrofit second CPU to
  * old PDA.
  */
 
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
index c8e1f04941b..23b6c4b62c7 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/bfin-lq035q1-fb.c
@@ -154,8 +154,10 @@ static int __devinit lq035q1_spidev_probe(struct spi_device *spi)
 
 	ret = lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
 	ret |= lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
-	if (ret)
+	if (ret) {
+		kfree(ctl);
 		return ret;
+	}
 
 	spi_set_drvdata(spi, ctl);
 
diff --git a/drivers/video/bfin_adv7393fb.h b/drivers/video/bfin_adv7393fb.h
index 8c7f9e4fc6e..cd591b5152a 100644
--- a/drivers/video/bfin_adv7393fb.h
+++ b/drivers/video/bfin_adv7393fb.h
@@ -87,12 +87,12 @@ static const u8 init_NTSC_TESTPATTERN[] = {
 
 static const u8 init_NTSC[] = {
 	0x00, 0x1E,	/* Power up all DACs and PLL */
-	0xC3, 0x26,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xC5, 0x12,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xC2, 0x4A,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xC6, 0x5E,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xBD, 0x19,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xBF, 0x42,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xC3, 0x26,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xC5, 0x12,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xC2, 0x4A,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xC6, 0x5E,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xBD, 0x19,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xBF, 0x42,	/* Program RGB->YCrCb Color Space conversion matrix */
 	0x8C, 0x1F,	/* NTSC Subcarrier Frequency */
 	0x8D, 0x7C,	/* NTSC Subcarrier Frequency */
 	0x8E, 0xF0,	/* NTSC Subcarrier Frequency */
@@ -109,12 +109,12 @@ static const u8 init_NTSC[] = {
 
 static const u8 init_PAL[] = {
 	0x00, 0x1E,	/* Power up all DACs and PLL */
-	0xC3, 0x26,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xC5, 0x12,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xC2, 0x4A,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xC6, 0x5E,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xBD, 0x19,	/* Program RGB->YCrCb Color Space convertion matrix */
-	0xBF, 0x42,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xC3, 0x26,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xC5, 0x12,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xC2, 0x4A,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xC6, 0x5E,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xBD, 0x19,	/* Program RGB->YCrCb Color Space conversion matrix */
+	0xBF, 0x42,	/* Program RGB->YCrCb Color Space conversion matrix */
 	0x8C, 0xCB,	/* PAL Subcarrier Frequency */
 	0x8D, 0x8A,	/* PAL Subcarrier Frequency */
 	0x8E, 0x09,	/* PAL Subcarrier Frequency */
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index c58393402da..8745637e4b7 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -370,7 +370,6 @@ static void fb_flashcursor(struct work_struct *work)
 {
 	struct fb_info *info = container_of(work, struct fb_info, queue);
 	struct fbcon_ops *ops = info->fbcon_par;
-	struct display *p;
 	struct vc_data *vc = NULL;
 	int c;
 	int mode;
@@ -386,7 +385,6 @@ static void fb_flashcursor(struct work_struct *work)
 		return;
 	}
 
-	p = &fb_display[vc->vc_num];
 	c = scr_readw((u16 *) vc->vc_pos);
 	mode = (!ops->cursor_flash || ops->cursor_state.enable) ?
 		CM_ERASE : CM_DRAW;
diff --git a/drivers/video/console/font_mini_4x6.c b/drivers/video/console/font_mini_4x6.c
index a19a7f33133..fa6e698e63c 100644
--- a/drivers/video/console/font_mini_4x6.c
+++ b/drivers/video/console/font_mini_4x6.c
@@ -1,5 +1,5 @@
 
-/* Hand composed "Miniscule" 4x6 font, with binary data generated using
+/* Hand composed "Minuscule" 4x6 font, with binary data generated using
  * Perl stub.
  *
  * Use 'perl -x mini_4x6.c < mini_4x6.c > new_version.c' to regenerate
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 8d61ef96eed..8b7d47386f3 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -763,7 +763,7 @@ static int fb_wait_for_vsync(struct fb_info *info)
 
 	/*
 	 * Set flag to 0 and wait for isr to set to 1. It would seem there is a
-	 * race condition here where the ISR could have occured just before or
+	 * race condition here where the ISR could have occurred just before or
 	 * just after this set. But since we are just coarsely waiting for
 	 * a frame to complete then that's OK. i.e. if the frame completed
 	 * just before this code executed then we have to wait another full
diff --git a/drivers/video/display/display-sysfs.c b/drivers/video/display/display-sysfs.c
index f6a09ab0dac..0c647d7af0e 100644
--- a/drivers/video/display/display-sysfs.c
+++ b/drivers/video/display/display-sysfs.c
@@ -182,7 +182,7 @@ void display_device_unregister(struct display_device *ddev)
 	mutex_lock(&ddev->lock);
 	device_unregister(ddev->dev);
 	mutex_unlock(&ddev->lock);
-	// Mark device index as avaliable
+	// Mark device index as available
 	mutex_lock(&allocated_dsp_lock);
 	idr_remove(&allocated_dsp, ddev->idx);
 	mutex_unlock(&allocated_dsp_lock);
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 70477c2e4b6..4eb38db36e4 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -53,6 +53,7 @@ enum {
 	M_MB_7_1,	/* MacBook, 7th rev. */
 	M_MB_SR,	/* MacBook, 2nd gen, (Santa Rosa) */
 	M_MBA,		/* MacBook Air */
+	M_MBA_3,	/* Macbook Air, 3rd rev */
 	M_MBP,		/* MacBook Pro */
 	M_MBP_2,	/* MacBook Pro 2nd gen */
 	M_MBP_2_2,	/* MacBook Pro 2,2nd gen */
@@ -64,43 +65,54 @@ enum {
 	M_MBP_6_1,	/* MacBook Pro, 6,1th gen */
 	M_MBP_6_2,	/* MacBook Pro, 6,2th gen */
 	M_MBP_7_1,	/* MacBook Pro, 7,1th gen */
+	M_MBP_8_2,	/* MacBook Pro, 8,2nd gen */
 	M_UNKNOWN	/* placeholder */
 };
 
+#define OVERRIDE_NONE	0x0
+#define OVERRIDE_BASE	0x1
+#define OVERRIDE_STRIDE	0x2
+#define OVERRIDE_HEIGHT	0x4
+#define OVERRIDE_WIDTH	0x8
+
 static struct efifb_dmi_info {
 	char *optname;
 	unsigned long base;
 	int stride;
 	int width;
 	int height;
+	int flags;
 } dmi_list[] __initdata = {
-	[M_I17] = { "i17", 0x80010000, 1472 * 4, 1440, 900 },
-	[M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050 }, /* guess */
-	[M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050 },
-	[M_I24] = { "i24", 0x80010000, 2048 * 4, 1920, 1200 }, /* guess */
-	[M_I24_8_1] = { "imac8", 0xc0060000, 2048 * 4, 1920, 1200 },
-	[M_I24_10_1] = { "imac10", 0xc0010000, 2048 * 4, 1920, 1080 },
-	[M_I27_11_1] = { "imac11", 0xc0010000, 2560 * 4, 2560, 1440 },
-	[M_MINI]= { "mini", 0x80000000, 2048 * 4, 1024, 768 },
-	[M_MINI_3_1] = { "mini31", 0x40010000, 1024 * 4, 1024, 768 },
-	[M_MINI_4_1] = { "mini41", 0xc0010000, 2048 * 4, 1920, 1200 },
-	[M_MB] = { "macbook", 0x80000000, 2048 * 4, 1280, 800 },
-	[M_MB_5_1] = { "macbook51", 0x80010000, 2048 * 4, 1280, 800 },
-	[M_MB_6_1] = { "macbook61", 0x80010000, 2048 * 4, 1280, 800 },
-	[M_MB_7_1] = { "macbook71", 0x80010000, 2048 * 4, 1280, 800 },
-	[M_MBA] = { "mba", 0x80000000, 2048 * 4, 1280, 800 },
-	[M_MBP] = { "mbp", 0x80010000, 1472 * 4, 1440, 900 },
-	[M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */
-	[M_MBP_2_2] = { "mbp22", 0x80010000, 1472 * 4, 1440, 900 },
-	[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 },
-	[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 },
-	[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 },
-	[M_MBP_5_2] = { "mbp52", 0xc0010000, 2048 * 4, 1920, 1200 },
-	[M_MBP_5_3] = { "mbp53", 0xd0010000, 2048 * 4, 1440, 900 },
-	[M_MBP_6_1] = { "mbp61", 0x90030000, 2048 * 4, 1920, 1200 },
-	[M_MBP_6_2] = { "mbp62", 0x90030000, 2048 * 4, 1680, 1050 },
-	[M_MBP_7_1] = { "mbp71", 0xc0010000, 2048 * 4, 1280, 800 },
-	[M_UNKNOWN] = { NULL, 0, 0, 0, 0 }
+	[M_I17] = { "i17", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050, OVERRIDE_NONE }, /* guess */
+	[M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050, OVERRIDE_NONE },
+	[M_I24] = { "i24", 0x80010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE }, /* guess */
+	[M_I24_8_1] = { "imac8", 0xc0060000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_I24_10_1] = { "imac10", 0xc0010000, 2048 * 4, 1920, 1080, OVERRIDE_NONE },
+	[M_I27_11_1] = { "imac11", 0xc0010000, 2560 * 4, 2560, 1440, OVERRIDE_NONE },
+	[M_MINI]= { "mini", 0x80000000, 2048 * 4, 1024, 768, OVERRIDE_NONE },
+	[M_MINI_3_1] = { "mini31", 0x40010000, 1024 * 4, 1024, 768, OVERRIDE_NONE },
+	[M_MINI_4_1] = { "mini41", 0xc0010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MB] = { "macbook", 0x80000000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_5_1] = { "macbook51", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_6_1] = { "macbook61", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_7_1] = { "macbook71", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MBA] = { "mba", 0x80000000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	/* 11" Macbook Air 3,1 passes the wrong stride */
+	[M_MBA_3] = { "mba3", 0, 2048 * 4, 0, 0, OVERRIDE_STRIDE },
+	[M_MBP] = { "mbp", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_2] = { "mbp2", 0, 0, 0, 0, OVERRIDE_NONE }, /* placeholder */
+	[M_MBP_2_2] = { "mbp22", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_5_2] = { "mbp52", 0xc0010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_5_3] = { "mbp53", 0xd0010000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_6_1] = { "mbp61", 0x90030000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_6_2] = { "mbp62", 0x90030000, 2048 * 4, 1680, 1050, OVERRIDE_NONE },
+	[M_MBP_7_1] = { "mbp71", 0xc0010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MBP_8_2] = { "mbp82", 0x90010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_UNKNOWN] = { NULL, 0, 0, 0, 0, OVERRIDE_NONE }
 };
 
 static int set_system(const struct dmi_system_id *id);
@@ -138,6 +150,7 @@ static const struct dmi_system_id dmi_system_table[] __initconst = {
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook6,1", M_MB_6_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook7,1", M_MB_7_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir1,1", M_MBA),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir3,1", M_MBA_3),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro1,1", M_MBP),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,1", M_MBP_2),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,2", M_MBP_2_2),
@@ -151,19 +164,26 @@ static const struct dmi_system_id dmi_system_table[] __initconst = {
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,1", M_MBP_6_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,2", M_MBP_6_2),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro7,1", M_MBP_7_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro8,2", M_MBP_8_2),
 	{},
 };
 
+#define choose_value(dmivalue, fwvalue, field, flags) ({	\
+		typeof(fwvalue) _ret_ = fwvalue;		\
+		if ((flags) & (field))				\
+			_ret_ = dmivalue;			\
+		else if ((fwvalue) == 0)			\
+			_ret_ = dmivalue;			\
+		_ret_;						\
+	})
+
 static int set_system(const struct dmi_system_id *id)
 {
 	struct efifb_dmi_info *info = id->driver_data;
-	if (info->base == 0)
-		return 0;
 
-	printk(KERN_INFO "efifb: dmi detected %s - framebuffer at %p "
-			 "(%dx%d, stride %d)\n", id->ident,
-			 (void *)info->base, info->width, info->height,
-			 info->stride);
+	if (info->base == 0 && info->height == 0 && info->width == 0
+			&& info->stride == 0)
+		return 0;
 
 	/* Trust the bootloader over the DMI tables */
 	if (screen_info.lfb_base == 0) {
@@ -171,40 +191,47 @@ static int set_system(const struct dmi_system_id *id)
 		struct pci_dev *dev = NULL;
 		int found_bar = 0;
 #endif
-		screen_info.lfb_base = info->base;
+		if (info->base) {
+			screen_info.lfb_base = choose_value(info->base,
+				screen_info.lfb_base, OVERRIDE_BASE,
+				info->flags);
 
 #if defined(CONFIG_PCI)
-		/* make sure that the address in the table is actually on a
-		 * VGA device's PCI BAR */
-
-		for_each_pci_dev(dev) {
-			int i;
-			if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
-				continue;
-			for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-				resource_size_t start, end;
-
-				start = pci_resource_start(dev, i);
-				if (start == 0)
-					break;
-				end = pci_resource_end(dev, i);
-				if (screen_info.lfb_base >= start &&
-						screen_info.lfb_base < end) {
-					found_bar = 1;
+			/* make sure that the address in the table is actually
+			 * on a VGA device's PCI BAR */
+
+			for_each_pci_dev(dev) {
+				int i;
+				if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+					continue;
+				for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+					resource_size_t start, end;
+
+					start = pci_resource_start(dev, i);
+					if (start == 0)
+						break;
+					end = pci_resource_end(dev, i);
+					if (screen_info.lfb_base >= start &&
+					    screen_info.lfb_base < end) {
+						found_bar = 1;
+					}
 				}
 			}
-		}
-		if (!found_bar)
-			screen_info.lfb_base = 0;
+			if (!found_bar)
+				screen_info.lfb_base = 0;
 #endif
+		}
 	}
 	if (screen_info.lfb_base) {
-		if (screen_info.lfb_linelength == 0)
-			screen_info.lfb_linelength = info->stride;
-		if (screen_info.lfb_width == 0)
-			screen_info.lfb_width = info->width;
-		if (screen_info.lfb_height == 0)
-			screen_info.lfb_height = info->height;
+		screen_info.lfb_linelength = choose_value(info->stride,
+			screen_info.lfb_linelength, OVERRIDE_STRIDE,
+			info->flags);
+		screen_info.lfb_width = choose_value(info->width,
+			screen_info.lfb_width, OVERRIDE_WIDTH,
+			info->flags);
+		screen_info.lfb_height = choose_value(info->height,
+			screen_info.lfb_height, OVERRIDE_HEIGHT,
+			info->flags);
 		if (screen_info.orig_video_isVGA == 0)
 			screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
 	} else {
@@ -214,6 +241,13 @@ static int set_system(const struct dmi_system_id *id)
 		screen_info.orig_video_isVGA = 0;
 		return 0;
 	}
+
+	printk(KERN_INFO "efifb: dmi detected %s - framebuffer at %p "
+			 "(%dx%d, stride %d)\n", id->ident,
+			 (void *)screen_info.lfb_base, screen_info.lfb_width,
+			 screen_info.lfb_height, screen_info.lfb_linelength);
+
+
 	return 1;
 }
 
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c
index b358d045f13..cbdb1bd77c2 100644
--- a/drivers/video/ep93xx-fb.c
+++ b/drivers/video/ep93xx-fb.c
@@ -456,7 +456,7 @@ static int __init ep93xxfb_alloc_videomem(struct fb_info *info)
 	 * There is a bug in the ep93xx framebuffer which causes problems
 	 * if bit 27 of the physical address is set.
 	 * See: http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
-	 * There does not seem to be any offical errata for this, but I
+	 * There does not seem to be any official errata for this, but I
 	 * have confirmed the problem exists on my hardware (ep9315) at
 	 * least.
 	 */
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
index dbd2dc4745d..27f2c57e06e 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fb-puv3.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/vmalloc.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/fb.h>
@@ -531,7 +530,7 @@ static int unifb_set_par(struct fb_info *info)
 		return -EINVAL;
 	}
 
-	writel(PKUNITY_UNIGFX_MMAP_BASE, UDE_FSA);
+	writel(info->fix.smem_start, UDE_FSA);
 	writel(info->var.yres, UDE_LS);
 	writel(get_line_length(info->var.xres,
 			info->var.bits_per_pixel) >> 3, UDE_PS);
@@ -680,13 +679,27 @@ static int unifb_probe(struct platform_device *dev)
 	struct fb_info *info;
 	u32 unifb_regs[UNIFB_REGS_NUM];
 	int retval = -ENOMEM;
-	struct resource *iomem, *mapmem;
+	struct resource *iomem;
+	void *videomemory;
+
+	videomemory = (void *)__get_free_pages(GFP_KERNEL | __GFP_COMP,
+				get_order(UNIFB_MEMSIZE));
+	if (!videomemory)
+		goto err;
+
+	memset(videomemory, 0, UNIFB_MEMSIZE);
+
+	unifb_fix.smem_start = virt_to_phys(videomemory);
+	unifb_fix.smem_len = UNIFB_MEMSIZE;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	unifb_fix.mmio_start = iomem->start;
 
 	info = framebuffer_alloc(sizeof(u32)*256, &dev->dev);
 	if (!info)
 		goto err;
 
-	info->screen_base = (char __iomem *)KUSER_UNIGFX_BASE;
+	info->screen_base = (char __iomem *)videomemory;
 	info->fbops = &unifb_ops;
 
 	retval = fb_find_mode(&info->var, info, NULL,
@@ -695,13 +708,6 @@ static int unifb_probe(struct platform_device *dev)
 	if (!retval || (retval == 4))
 		info->var = unifb_default;
 
-	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	unifb_fix.mmio_start = iomem->start;
-
-	mapmem = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	unifb_fix.smem_start = mapmem->start;
-	unifb_fix.smem_len = UNIFB_MEMSIZE;
-
 	info->fix = unifb_fix;
 	info->pseudo_palette = info->par;
 	info->par = NULL;
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index e2bf95370e4..5aac00eb183 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -42,9 +42,34 @@
 
 #define FBPIXMAPSIZE	(1024 * 8)
 
+static DEFINE_MUTEX(registration_lock);
 struct fb_info *registered_fb[FB_MAX] __read_mostly;
 int num_registered_fb __read_mostly;
 
+static struct fb_info *get_fb_info(unsigned int idx)
+{
+	struct fb_info *fb_info;
+
+	if (idx >= FB_MAX)
+		return ERR_PTR(-ENODEV);
+
+	mutex_lock(&registration_lock);
+	fb_info = registered_fb[idx];
+	if (fb_info)
+		atomic_inc(&fb_info->count);
+	mutex_unlock(&registration_lock);
+
+	return fb_info;
+}
+
+static void put_fb_info(struct fb_info *fb_info)
+{
+	if (!atomic_dec_and_test(&fb_info->count))
+		return;
+	if (fb_info->fbops->fb_destroy)
+		fb_info->fbops->fb_destroy(fb_info);
+}
+
 int lock_fb_info(struct fb_info *info)
 {
 	mutex_lock(&info->lock);
@@ -647,6 +672,7 @@ int fb_show_logo(struct fb_info *info, int rotate) { return 0; }
 
 static void *fb_seq_start(struct seq_file *m, loff_t *pos)
 {
+	mutex_lock(&registration_lock);
 	return (*pos < FB_MAX) ? pos : NULL;
 }
 
@@ -658,6 +684,7 @@ static void *fb_seq_next(struct seq_file *m, void *v, loff_t *pos)
 
 static void fb_seq_stop(struct seq_file *m, void *v)
 {
+	mutex_unlock(&registration_lock);
 }
 
 static int fb_seq_show(struct seq_file *m, void *v)
@@ -690,13 +717,30 @@ static const struct file_operations fb_proc_fops = {
 	.release	= seq_release,
 };
 
-static ssize_t
-fb_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+/*
+ * We hold a reference to the fb_info in file->private_data,
+ * but if the current registered fb has changed, we don't
+ * actually want to use it.
+ *
+ * So look up the fb_info using the inode minor number,
+ * and just verify it against the reference we have.
+ */
+static struct fb_info *file_fb_info(struct file *file)
 {
-	unsigned long p = *ppos;
 	struct inode *inode = file->f_path.dentry->d_inode;
 	int fbidx = iminor(inode);
 	struct fb_info *info = registered_fb[fbidx];
+
+	if (info != file->private_data)
+		info = NULL;
+	return info;
+}
+
+static ssize_t
+fb_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+{
+	unsigned long p = *ppos;
+	struct fb_info *info = file_fb_info(file);
 	u8 *buffer, *dst;
 	u8 __iomem *src;
 	int c, cnt = 0, err = 0;
@@ -761,9 +805,7 @@ static ssize_t
 fb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
-	struct inode *inode = file->f_path.dentry->d_inode;
-	int fbidx = iminor(inode);
-	struct fb_info *info = registered_fb[fbidx];
+	struct fb_info *info = file_fb_info(file);
 	u8 *buffer, *src;
 	u8 __iomem *dst;
 	int c, cnt = 0, err = 0;
@@ -1141,10 +1183,10 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
 
 static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	int fbidx = iminor(inode);
-	struct fb_info *info = registered_fb[fbidx];
+	struct fb_info *info = file_fb_info(file);
 
+	if (!info)
+		return -ENODEV;
 	return do_fb_ioctl(info, cmd, arg);
 }
 
@@ -1265,12 +1307,13 @@ static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd,
 static long fb_compat_ioctl(struct file *file, unsigned int cmd,
 			    unsigned long arg)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	int fbidx = iminor(inode);
-	struct fb_info *info = registered_fb[fbidx];
-	struct fb_ops *fb = info->fbops;
+	struct fb_info *info = file_fb_info(file);
+	struct fb_ops *fb;
 	long ret = -ENOIOCTLCMD;
 
+	if (!info)
+		return -ENODEV;
+	fb = info->fbops;
 	switch(cmd) {
 	case FBIOGET_VSCREENINFO:
 	case FBIOPUT_VSCREENINFO:
@@ -1303,16 +1346,18 @@ static long fb_compat_ioctl(struct file *file, unsigned int cmd,
 static int
 fb_mmap(struct file *file, struct vm_area_struct * vma)
 {
-	int fbidx = iminor(file->f_path.dentry->d_inode);
-	struct fb_info *info = registered_fb[fbidx];
-	struct fb_ops *fb = info->fbops;
+	struct fb_info *info = file_fb_info(file);
+	struct fb_ops *fb;
 	unsigned long off;
 	unsigned long start;
 	u32 len;
 
+	if (!info)
+		return -ENODEV;
 	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
 		return -EINVAL;
 	off = vma->vm_pgoff << PAGE_SHIFT;
+	fb = info->fbops;
 	if (!fb)
 		return -ENODEV;
 	mutex_lock(&info->mm_lock);
@@ -1361,14 +1406,16 @@ __releases(&info->lock)
 	struct fb_info *info;
 	int res = 0;
 
-	if (fbidx >= FB_MAX)
-		return -ENODEV;
-	info = registered_fb[fbidx];
-	if (!info)
+	info = get_fb_info(fbidx);
+	if (!info) {
 		request_module("fb%d", fbidx);
-	info = registered_fb[fbidx];
-	if (!info)
-		return -ENODEV;
+		info = get_fb_info(fbidx);
+		if (!info)
+			return -ENODEV;
+	}
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
 	mutex_lock(&info->lock);
 	if (!try_module_get(info->fbops->owner)) {
 		res = -ENODEV;
@@ -1386,6 +1433,8 @@ __releases(&info->lock)
 #endif
 out:
 	mutex_unlock(&info->lock);
+	if (res)
+		put_fb_info(info);
 	return res;
 }
 
@@ -1401,6 +1450,7 @@ __releases(&info->lock)
 		info->fbops->fb_release(info,1);
 	module_put(info->fbops->owner);
 	mutex_unlock(&info->lock);
+	put_fb_info(info);
 	return 0;
 }
 
@@ -1487,8 +1537,10 @@ static bool fb_do_apertures_overlap(struct apertures_struct *gena,
 	return false;
 }
 
+static int do_unregister_framebuffer(struct fb_info *fb_info);
+
 #define VGA_FB_PHYS 0xA0000
-void remove_conflicting_framebuffers(struct apertures_struct *a,
+static void do_remove_conflicting_framebuffers(struct apertures_struct *a,
 				     const char *name, bool primary)
 {
 	int i;
@@ -1507,46 +1559,35 @@ void remove_conflicting_framebuffers(struct apertures_struct *a,
 			(primary && gen_aper && gen_aper->count &&
 			 gen_aper->ranges[0].base == VGA_FB_PHYS)) {
 
-			printk(KERN_ERR "fb: conflicting fb hw usage "
+			printk(KERN_INFO "fb: conflicting fb hw usage "
 			       "%s vs %s - removing generic driver\n",
 			       name, registered_fb[i]->fix.id);
-			unregister_framebuffer(registered_fb[i]);
+			do_unregister_framebuffer(registered_fb[i]);
 		}
 	}
 }
-EXPORT_SYMBOL(remove_conflicting_framebuffers);
 
-/**
- *	register_framebuffer - registers a frame buffer device
- *	@fb_info: frame buffer info structure
- *
- *	Registers a frame buffer device @fb_info.
- *
- *	Returns negative errno on error, or zero for success.
- *
- */
-
-int
-register_framebuffer(struct fb_info *fb_info)
+static int do_register_framebuffer(struct fb_info *fb_info)
 {
 	int i;
 	struct fb_event event;
 	struct fb_videomode mode;
 
-	if (num_registered_fb == FB_MAX)
-		return -ENXIO;
-
 	if (fb_check_foreignness(fb_info))
 		return -ENOSYS;
 
-	remove_conflicting_framebuffers(fb_info->apertures, fb_info->fix.id,
+	do_remove_conflicting_framebuffers(fb_info->apertures, fb_info->fix.id,
 					 fb_is_primary_device(fb_info));
 
+	if (num_registered_fb == FB_MAX)
+		return -ENXIO;
+
 	num_registered_fb++;
 	for (i = 0 ; i < FB_MAX; i++)
 		if (!registered_fb[i])
 			break;
 	fb_info->node = i;
+	atomic_set(&fb_info->count, 1);
 	mutex_init(&fb_info->lock);
 	mutex_init(&fb_info->mm_lock);
 
@@ -1592,36 +1633,14 @@ register_framebuffer(struct fb_info *fb_info)
 	return 0;
 }
 
-
-/**
- *	unregister_framebuffer - releases a frame buffer device
- *	@fb_info: frame buffer info structure
- *
- *	Unregisters a frame buffer device @fb_info.
- *
- *	Returns negative errno on error, or zero for success.
- *
- *      This function will also notify the framebuffer console
- *      to release the driver.
- *
- *      This is meant to be called within a driver's module_exit()
- *      function. If this is called outside module_exit(), ensure
- *      that the driver implements fb_open() and fb_release() to
- *      check that no processes are using the device.
- */
-
-int
-unregister_framebuffer(struct fb_info *fb_info)
+static int do_unregister_framebuffer(struct fb_info *fb_info)
 {
 	struct fb_event event;
 	int i, ret = 0;
 
 	i = fb_info->node;
-	if (!registered_fb[i]) {
-		ret = -EINVAL;
-		goto done;
-	}
-
+	if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
+		return -EINVAL;
 
 	if (!lock_fb_info(fb_info))
 		return -ENODEV;
@@ -1629,16 +1648,14 @@ unregister_framebuffer(struct fb_info *fb_info)
 	ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
 	unlock_fb_info(fb_info);
 
-	if (ret) {
-		ret = -EINVAL;
-		goto done;
-	}
+	if (ret)
+		return -EINVAL;
 
 	if (fb_info->pixmap.addr &&
 	    (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
 		kfree(fb_info->pixmap.addr);
 	fb_destroy_modelist(&fb_info->modelist);
-	registered_fb[i]=NULL;
+	registered_fb[i] = NULL;
 	num_registered_fb--;
 	fb_cleanup_device(fb_info);
 	device_destroy(fb_class, MKDEV(FB_MAJOR, i));
@@ -1646,9 +1663,65 @@ unregister_framebuffer(struct fb_info *fb_info)
 	fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
 
 	/* this may free fb info */
-	if (fb_info->fbops->fb_destroy)
-		fb_info->fbops->fb_destroy(fb_info);
-done:
+	put_fb_info(fb_info);
+	return 0;
+}
+
+void remove_conflicting_framebuffers(struct apertures_struct *a,
+				     const char *name, bool primary)
+{
+	mutex_lock(&registration_lock);
+	do_remove_conflicting_framebuffers(a, name, primary);
+	mutex_unlock(&registration_lock);
+}
+EXPORT_SYMBOL(remove_conflicting_framebuffers);
+
+/**
+ *	register_framebuffer - registers a frame buffer device
+ *	@fb_info: frame buffer info structure
+ *
+ *	Registers a frame buffer device @fb_info.
+ *
+ *	Returns negative errno on error, or zero for success.
+ *
+ */
+int
+register_framebuffer(struct fb_info *fb_info)
+{
+	int ret;
+
+	mutex_lock(&registration_lock);
+	ret = do_register_framebuffer(fb_info);
+	mutex_unlock(&registration_lock);
+
+	return ret;
+}
+
+/**
+ *	unregister_framebuffer - releases a frame buffer device
+ *	@fb_info: frame buffer info structure
+ *
+ *	Unregisters a frame buffer device @fb_info.
+ *
+ *	Returns negative errno on error, or zero for success.
+ *
+ *      This function will also notify the framebuffer console
+ *      to release the driver.
+ *
+ *      This is meant to be called within a driver's module_exit()
+ *      function. If this is called outside module_exit(), ensure
+ *      that the driver implements fb_open() and fb_release() to
+ *      check that no processes are using the device.
+ */
+int
+unregister_framebuffer(struct fb_info *fb_info)
+{
+	int ret;
+
+	mutex_lock(&registration_lock);
+	ret = do_unregister_framebuffer(fb_info);
+	mutex_unlock(&registration_lock);
+
 	return ret;
 }
 
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index f4a32779168..04251ce8918 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -33,7 +33,7 @@
  * for driver private data (info->par). info->par (if any) will be
  * aligned to sizeof(long).
  *
- * Returns the new structure, or NULL if an error occured.
+ * Returns the new structure, or NULL if an error occurred.
  *
  */
 struct fb_info *framebuffer_alloc(size_t size, struct device *dev)
diff --git a/drivers/video/fm2fb.c b/drivers/video/fm2fb.c
index 1b0feb8e724..d0533b7aad7 100644
--- a/drivers/video/fm2fb.c
+++ b/drivers/video/fm2fb.c
@@ -45,7 +45,7 @@
  *	buffer needs an amount of memory of 1.769.472 bytes which
  *	is near to 2 MByte (the allocated address space of Zorro2).
  *	The memory is channel interleaved. That means every channel
- *	owns four VRAMs. Unfortunatly most FrameMasters II are
+ *	owns four VRAMs. Unfortunately most FrameMasters II are
  *	not assembled with memory for the alpha channel. In this
  *	case it could be possible to add the frame buffer into the
  *	normal memory pool.
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 9048f87fa8c..bedf5be27f0 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -882,7 +882,7 @@ static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
  * which needs to be scaled in this function for the hardware. Things to take
  * into consideration are how many color registers, if any, are supported with
  * the current color visual. With truecolor mode no color palettes are
- * supported. Here a psuedo palette is created which we store the value in
+ * supported. Here a pseudo palette is created which we store the value in
  * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
  * color palette.
  */
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 933899dca33..7e7b7a9ba27 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -721,7 +721,7 @@ static int gbefb_set_par(struct fb_info *info)
 
 	   Tiles have the advantage that they can be allocated individually in
 	   memory. However, this mapping is not linear at all, which is not
-	   really convienient. In order to support linear addressing, the GBE
+	   really convenient. In order to support linear addressing, the GBE
 	   DMA hardware is fooled into thinking the screen is only one tile
 	   large and but has a greater height, so that the DMA transfer covers
 	   the same region.
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index be8ccb47ebe..cfcd8090f31 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -117,7 +117,7 @@ enum gp_registers {
 };
 
 #define GP_BLT_STATUS_CE		(1 << 4)	/* cmd buf empty */
-#define GP_BLT_STATUS_PB		(1 << 0)	/* primative busy */
+#define GP_BLT_STATUS_PB		(1 << 0)	/* primitive busy */
 
 
 /* Display Controller registers (table 6-47 from the data book) */
diff --git a/drivers/video/i810/i810_accel.c b/drivers/video/i810/i810_accel.c
index f5bedee4310..7672d2ea9b3 100644
--- a/drivers/video/i810/i810_accel.c
+++ b/drivers/video/i810/i810_accel.c
@@ -112,7 +112,7 @@ static inline int wait_for_engine_idle(struct fb_info *info)
  * @par: pointer to i810fb_par structure
  *
  * DESCRIPTION:
- * Checks/waits for sufficent space in ringbuffer of size
+ * Checks/waits for sufficient space in ringbuffer of size
  * space.  Returns the tail of the buffer
  */ 
 static inline u32 begin_iring(struct fb_info *info, u32 space)
diff --git a/drivers/video/kyro/STG4000OverlayDevice.c b/drivers/video/kyro/STG4000OverlayDevice.c
index a8c9713413e..0aeeaa10708 100644
--- a/drivers/video/kyro/STG4000OverlayDevice.c
+++ b/drivers/video/kyro/STG4000OverlayDevice.c
@@ -417,7 +417,7 @@ int SetOverlayViewPort(volatile STG4000REG __iomem *pSTGReg,
 	/***************** Horizontal decimation/scaling ***************************/
 
 	/*
-	 * Now we handle the horizontal case, this is a simplified verison of
+	 * Now we handle the horizontal case, this is a simplified version of
 	 * the vertical case in that we decimate by factors of 2.  as we are
 	 * working in words we should always be able to decimate by these
 	 * factors.  as we always have to have a buffer which is aligned to a
diff --git a/drivers/video/kyro/STG4000Reg.h b/drivers/video/kyro/STG4000Reg.h
index 244549e6136..5d626988258 100644
--- a/drivers/video/kyro/STG4000Reg.h
+++ b/drivers/video/kyro/STG4000Reg.h
@@ -16,7 +16,7 @@
 
 /*
  * Macros that access memory mapped card registers in PCI space
- * Add an appropraite section for your OS or processor architecture.
+ * Add an appropriate section for your OS or processor architecture.
  */
 #if defined(__KERNEL__)
 #include <asm/page.h>
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/matrox/matroxfb_DAC1064.h
index c6ed7801efe..1e6e45b57b7 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/matrox/matroxfb_DAC1064.h
@@ -46,7 +46,7 @@ void DAC1064_global_restore(struct matrox_fb_info *minfo);
 #define      M1064_XDVICLKCTRL_DVILOOPCTL       0x30
 	/* CRTC2 pixel clock allowed to(0)/blocked from(1) driving CRTC2 */
 #define      M1064_XDVICLKCTRL_C2DVICLKEN       0x40
-	/* P1PLL loop filter bandwith selection */
+	/* P1PLL loop filter bandwidth selection */
 #define      M1064_XDVICLKCTRL_P1LOOPBWDTCTL    0x80
 #define M1064_XCURCOL0RED	0x08
 #define M1064_XCURCOL0GREEN	0x09
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index 835aaaae6b9..9a44cec394b 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -387,7 +387,7 @@ static int Ti3026_init(struct matrox_fb_info *minfo, struct my_timming *m)
 			hw->DACreg[POS3026_XMISCCTRL] = TVP3026_XMISCCTRL_DAC_PUP | TVP3026_XMISCCTRL_DAC_8BIT | TVP3026_XMISCCTRL_PSEL_DIS | TVP3026_XMISCCTRL_PSEL_LOW;
 			break;
 		case 16:
-			/* XLATCHCTRL should be _4_1 / _2_1... Why is not? (_2_1 is used everytime) */
+			/* XLATCHCTRL should be _4_1 / _2_1... Why is not? (_2_1 is used every time) */
 			hw->DACreg[POS3026_XTRUECOLORCTRL] = (minfo->fbcon.var.green.length == 5) ? (TVP3026_XTRUECOLORCTRL_DIRECTCOLOR | TVP3026_XTRUECOLORCTRL_ORGB_1555) : (TVP3026_XTRUECOLORCTRL_DIRECTCOLOR | TVP3026_XTRUECOLORCTRL_RGB_565);
 			hw->DACreg[POS3026_XMUXCTRL] = muxctrl | TVP3026_XMUXCTRL_PIXEL_16BIT;
 			hw->DACreg[POS3026_XCLKCTRL] = TVP3026_XCLKCTRL_SRC_PLL | TVP3026_XCLKCTRL_DIV2;
@@ -399,7 +399,7 @@ static int Ti3026_init(struct matrox_fb_info *minfo, struct my_timming *m)
 			hw->DACreg[POS3026_XCLKCTRL] = TVP3026_XCLKCTRL_SRC_PLL | TVP3026_XCLKCTRL_DIV4;
 			break;
 		case 32:
-			/* XLATCHCTRL should be _2_1 / _1_1... Why is not? (_2_1 is used everytime) */
+			/* XLATCHCTRL should be _2_1 / _1_1... Why is not? (_2_1 is used every time) */
 			hw->DACreg[POS3026_XMUXCTRL] = muxctrl | TVP3026_XMUXCTRL_PIXEL_32BIT;
 			break;
 		default:
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 5ce6fa6e59f..44bf8d4a216 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -621,7 +621,7 @@ static int matroxfb_decode_var(const struct matrox_fb_info *minfo,
 		var->yoffset = var->yres_virtual - var->yres;
 
 	if (bpp == 16 && var->green.length == 5) {
-		bpp--; /* an artifical value - 15 */
+		bpp--; /* an artificial value - 15 */
 	}
 
 	for (rgbt = table; rgbt->bpp < bpp; rgbt++);
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index f96a471cb1a..11ed57bb704 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -12,7 +12,7 @@
 #undef MATROXFB_DEBUG
 
 /* heavy debugging: */
-/* -- logs putc[s], so everytime a char is displayed, it's logged */
+/* -- logs putc[s], so every time a char is displayed, it's logged */
 #undef MATROXFB_DEBUG_HEAVY
 
 /* This one _could_ cause infinite loops */
diff --git a/drivers/video/nuc900fb.h b/drivers/video/nuc900fb.h
index 6c23aa3d3b8..bc7c9300f27 100644
--- a/drivers/video/nuc900fb.h
+++ b/drivers/video/nuc900fb.h
@@ -8,7 +8,7 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
- *   Auther:
+ *   Author:
  *        Wang Qiang(rurality.linux@gmail.com)  2009/12/16
  */
 
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 15e7f1912af..196fa2e7f43 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -64,7 +64,7 @@ config FB_OMAP_MANUAL_UPDATE
 	depends on FB_OMAP && FB_OMAP_LCDC_EXTERNAL
 	help
 	  Say Y here, if your user-space applications are capable of
-	  notifying the frame buffer driver when a change has occured in
+	  notifying the frame buffer driver when a change has occurred in
 	  the frame buffer content and thus a reload of the image data to
 	  the external frame buffer is required. If unsure, say N.
 
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 0d44f070ef3..a981def8099 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -587,7 +587,7 @@ static void get_edid_timing_data(u8 *edid)
 	struct hdmi_cm cm;
 	struct omap_video_timings edid_timings;
 
-	/* seach block 0, there are 4 DTDs arranged in priority order */
+	/* search block 0, there are 4 DTDs arranged in priority order */
 	for (count = 0; count < EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR; count++) {
 		current_descriptor_addrs =
 			EDID_DESCRIPTOR_BLOCK0_ADDRESS +
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/pxa3xx-gcu.c
index cf4beb9dc9b..0283c702109 100644
--- a/drivers/video/pxa3xx-gcu.c
+++ b/drivers/video/pxa3xx-gcu.c
@@ -25,7 +25,7 @@
 
 /*
  * WARNING: This controller is attached to System Bus 2 of the PXA which
- * needs its arbiter to be enabled explictly (CKENB & 1<<9).
+ * needs its arbiter to be enabled explicitly (CKENB & 1<<9).
  * There is currently no way to do this from Linux, so you need to teach
  * your bootloader for now.
  */
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 825b665245b..0f4e8c942f9 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -627,7 +627,12 @@ static void overlay1fb_enable(struct pxafb_layer *ofb)
 
 static void overlay1fb_disable(struct pxafb_layer *ofb)
 {
-	uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+	uint32_t lccr5;
+
+	if (!(lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN))
+		return;
+
+	lccr5 = lcd_readl(ofb->fbi, LCCR5);
 
 	lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN);
 
@@ -685,7 +690,12 @@ static void overlay2fb_enable(struct pxafb_layer *ofb)
 
 static void overlay2fb_disable(struct pxafb_layer *ofb)
 {
-	uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5);
+	uint32_t lccr5;
+
+	if (!(lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN))
+		return;
+
+	lccr5 = lcd_readl(ofb->fbi, LCCR5);
 
 	lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN);
 
@@ -720,12 +730,10 @@ static int overlayfb_open(struct fb_info *info, int user)
 	if (user == 0)
 		return -ENODEV;
 
-	/* allow only one user at a time */
-	if (atomic_inc_and_test(&ofb->usage))
-		return -EBUSY;
+	if (ofb->usage++ == 0)
+		/* unblank the base framebuffer */
+		fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
 
-	/* unblank the base framebuffer */
-	fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
 	return 0;
 }
 
@@ -733,12 +741,15 @@ static int overlayfb_release(struct fb_info *info, int user)
 {
 	struct pxafb_layer *ofb = (struct pxafb_layer*) info;
 
-	atomic_dec(&ofb->usage);
-	ofb->ops->disable(ofb);
+	if (ofb->usage == 1) {
+		ofb->ops->disable(ofb);
+		ofb->fb.var.height	= -1;
+		ofb->fb.var.width	= -1;
+		ofb->fb.var.xres = ofb->fb.var.xres_virtual = 0;
+		ofb->fb.var.yres = ofb->fb.var.yres_virtual = 0;
 
-	free_pages_exact(ofb->video_mem, ofb->video_mem_size);
-	ofb->video_mem = NULL;
-	ofb->video_mem_size = 0;
+		ofb->usage--;
+	}
 	return 0;
 }
 
@@ -750,7 +761,7 @@ static int overlayfb_check_var(struct fb_var_screeninfo *var,
 	int xpos, ypos, pfor, bpp;
 
 	xpos = NONSTD_TO_XPOS(var->nonstd);
-	ypos = NONSTD_TO_XPOS(var->nonstd);
+	ypos = NONSTD_TO_YPOS(var->nonstd);
 	pfor = NONSTD_TO_PFOR(var->nonstd);
 
 	bpp = pxafb_var_to_bpp(var);
@@ -794,7 +805,7 @@ static int overlayfb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
-static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
+static int overlayfb_check_video_memory(struct pxafb_layer *ofb)
 {
 	struct fb_var_screeninfo *var = &ofb->fb.var;
 	int pfor = NONSTD_TO_PFOR(var->nonstd);
@@ -812,27 +823,11 @@ static int overlayfb_map_video_memory(struct pxafb_layer *ofb)
 
 	size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual);
 
-	/* don't re-allocate if the original video memory is enough */
 	if (ofb->video_mem) {
 		if (ofb->video_mem_size >= size)
 			return 0;
-
-		free_pages_exact(ofb->video_mem, ofb->video_mem_size);
 	}
-
-	ofb->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
-	if (ofb->video_mem == NULL)
-		return -ENOMEM;
-
-	ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
-	ofb->video_mem_size = size;
-
-	mutex_lock(&ofb->fb.mm_lock);
-	ofb->fb.fix.smem_start	= ofb->video_mem_phys;
-	ofb->fb.fix.smem_len	= ofb->fb.fix.line_length * var->yres_virtual;
-	mutex_unlock(&ofb->fb.mm_lock);
-	ofb->fb.screen_base	= ofb->video_mem;
-	return 0;
+	return -EINVAL;
 }
 
 static int overlayfb_set_par(struct fb_info *info)
@@ -841,13 +836,13 @@ static int overlayfb_set_par(struct fb_info *info)
 	struct fb_var_screeninfo *var = &info->var;
 	int xpos, ypos, pfor, bpp, ret;
 
-	ret = overlayfb_map_video_memory(ofb);
+	ret = overlayfb_check_video_memory(ofb);
 	if (ret)
 		return ret;
 
 	bpp  = pxafb_var_to_bpp(var);
 	xpos = NONSTD_TO_XPOS(var->nonstd);
-	ypos = NONSTD_TO_XPOS(var->nonstd);
+	ypos = NONSTD_TO_YPOS(var->nonstd);
 	pfor = NONSTD_TO_PFOR(var->nonstd);
 
 	ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) |
@@ -891,7 +886,7 @@ static void __devinit init_pxafb_overlay(struct pxafb_info *fbi,
 
 	ofb->id = id;
 	ofb->ops = &ofb_ops[id];
-	atomic_set(&ofb->usage, 0);
+	ofb->usage = 0;
 	ofb->fbi = fbi;
 	init_completion(&ofb->branch_done);
 }
@@ -904,29 +899,60 @@ static inline int pxafb_overlay_supported(void)
 	return 0;
 }
 
-static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
+static int __devinit pxafb_overlay_map_video_memory(struct pxafb_info *pxafb,
+	struct pxafb_layer *ofb)
+{
+	/* We assume that user will use at most video_mem_size for overlay fb,
+	 * anyway, it's useless to use 16bpp main plane and 24bpp overlay
+	 */
+	ofb->video_mem = alloc_pages_exact(PAGE_ALIGN(pxafb->video_mem_size),
+		GFP_KERNEL | __GFP_ZERO);
+	if (ofb->video_mem == NULL)
+		return -ENOMEM;
+
+	ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
+	ofb->video_mem_size = PAGE_ALIGN(pxafb->video_mem_size);
+
+	mutex_lock(&ofb->fb.mm_lock);
+	ofb->fb.fix.smem_start	= ofb->video_mem_phys;
+	ofb->fb.fix.smem_len	= pxafb->video_mem_size;
+	mutex_unlock(&ofb->fb.mm_lock);
+
+	ofb->fb.screen_base	= ofb->video_mem;
+
+	return 0;
+}
+
+static void __devinit pxafb_overlay_init(struct pxafb_info *fbi)
 {
 	int i, ret;
 
 	if (!pxafb_overlay_supported())
-		return 0;
+		return;
 
 	for (i = 0; i < 2; i++) {
-		init_pxafb_overlay(fbi, &fbi->overlay[i], i);
-		ret = register_framebuffer(&fbi->overlay[i].fb);
+		struct pxafb_layer *ofb = &fbi->overlay[i];
+		init_pxafb_overlay(fbi, ofb, i);
+		ret = register_framebuffer(&ofb->fb);
 		if (ret) {
 			dev_err(fbi->dev, "failed to register overlay %d\n", i);
-			return ret;
+			continue;
 		}
+		ret = pxafb_overlay_map_video_memory(fbi, ofb);
+		if (ret) {
+			dev_err(fbi->dev,
+				"failed to map video memory for overlay %d\n",
+				i);
+			unregister_framebuffer(&ofb->fb);
+			continue;
+		}
+		ofb->registered = 1;
 	}
 
 	/* mask all IU/BS/EOF/SOF interrupts */
 	lcd_writel(fbi, LCCR5, ~0);
 
-	/* place overlay(s) on top of base */
-	fbi->lccr0 |= LCCR0_OUC;
 	pr_info("PXA Overlay driver loaded successfully!\n");
-	return 0;
 }
 
 static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
@@ -936,8 +962,15 @@ static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi)
 	if (!pxafb_overlay_supported())
 		return;
 
-	for (i = 0; i < 2; i++)
-		unregister_framebuffer(&fbi->overlay[i].fb);
+	for (i = 0; i < 2; i++) {
+		struct pxafb_layer *ofb = &fbi->overlay[i];
+		if (ofb->registered) {
+			if (ofb->video_mem)
+				free_pages_exact(ofb->video_mem,
+					ofb->video_mem_size);
+			unregister_framebuffer(&ofb->fb);
+		}
+	}
 }
 #else
 static inline void pxafb_overlay_init(struct pxafb_info *fbi) {}
@@ -1368,7 +1401,8 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
 	    (lcd_readl(fbi, LCCR3) != fbi->reg_lccr3) ||
 	    (lcd_readl(fbi, LCCR4) != fbi->reg_lccr4) ||
 	    (lcd_readl(fbi, FDADR0) != fbi->fdadr[0]) ||
-	    (lcd_readl(fbi, FDADR1) != fbi->fdadr[1]))
+	    ((fbi->lccr0 & LCCR0_SDS) &&
+	    (lcd_readl(fbi, FDADR1) != fbi->fdadr[1])))
 		pxafb_schedule_work(fbi, C_REENABLE);
 
 	return 0;
@@ -1420,7 +1454,8 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
 	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 & ~LCCR0_ENB);
 
 	lcd_writel(fbi, FDADR0, fbi->fdadr[0]);
-	lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
+	if (fbi->lccr0 & LCCR0_SDS)
+		lcd_writel(fbi, FDADR1, fbi->fdadr[1]);
 	lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
 }
 
@@ -1613,7 +1648,10 @@ pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
 
 	switch (val) {
 	case CPUFREQ_PRECHANGE:
-		set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
+#ifdef CONFIG_FB_PXA_OVERLAY
+		if (!(fbi->overlay[0].usage || fbi->overlay[1].usage))
+#endif
+			set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
 		break;
 
 	case CPUFREQ_POSTCHANGE:
@@ -1806,6 +1844,12 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
 
 	pxafb_decode_mach_info(fbi, inf);
 
+#ifdef CONFIG_FB_PXA_OVERLAY
+	/* place overlay(s) on top of base */
+	if (pxafb_overlay_supported())
+		fbi->lccr0 |= LCCR0_OUC;
+#endif
+
 	init_waitqueue_head(&fbi->ctrlr_wait);
 	INIT_WORK(&fbi->task, pxafb_task);
 	mutex_init(&fbi->ctrlr_lock);
diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
index 2353521c5c8..26ba9fa3f73 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/pxafb.h
@@ -92,7 +92,8 @@ struct pxafb_layer_ops {
 struct pxafb_layer {
 	struct fb_info		fb;
 	int			id;
-	atomic_t		usage;
+	int			registered;
+	uint32_t		usage;
 	uint32_t		control[2];
 
 	struct pxafb_layer_ops	*ops;
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 6817d187d46..3b6cdcac8f1 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -48,7 +48,7 @@
 #undef writel
 #define writel(v, r) do { \
 	printk(KERN_DEBUG "%s: %08x => %p\n", __func__, (unsigned int)v, r); \
-	__raw_writel(v, r); } while(0)
+	__raw_writel(v, r); } while (0)
 #endif /* FB_S3C_DEBUG_REGWRITE */
 
 /* irq_flags bits */
@@ -518,7 +518,7 @@ static int s3c_fb_set_par(struct fb_info *info)
 
 		data = VIDTCON2_LINEVAL(var->yres - 1) |
 		       VIDTCON2_HOZVAL(var->xres - 1);
-		writel(data, regs +sfb->variant.vidtcon + 8 );
+		writel(data, regs + sfb->variant.vidtcon + 8);
 	}
 
 	/* write the buffer address */
@@ -1304,6 +1304,7 @@ static void s3c_fb_clear_win(struct s3c_fb *sfb, int win)
 
 static int __devinit s3c_fb_probe(struct platform_device *pdev)
 {
+	const struct platform_device_id *platid;
 	struct s3c_fb_driverdata *fbdrv;
 	struct device *dev = &pdev->dev;
 	struct s3c_fb_platdata *pd;
@@ -1312,7 +1313,8 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 	int win;
 	int ret = 0;
 
-	fbdrv = (struct s3c_fb_driverdata *)platform_get_device_id(pdev)->driver_data;
+	platid = platform_get_device_id(pdev);
+	fbdrv = (struct s3c_fb_driverdata *)platid->driver_data;
 
 	if (fbdrv->variant.nr_windows > S3C_FB_MAX_WIN) {
 		dev_err(dev, "too many windows, cannot attach\n");
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index ddedad9cd06..c4482f2e579 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -71,9 +71,9 @@ static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512};
 
 static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64", "S3 Trio64V+",
 			"S3 Trio64UV+", "S3 Trio64V2/DX", "S3 Trio64V2/GX",
-			"S3 Plato/PX", "S3 Aurora64VP", "S3 Virge",
+			"S3 Plato/PX", "S3 Aurora64V+", "S3 Virge",
 			"S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX",
-			"S3 Virge/GX2", "S3 Virge/GX2P", "S3 Virge/GX2P",
+			"S3 Virge/GX2", "S3 Virge/GX2+", "",
 			"S3 Trio3D/1X", "S3 Trio3D/2X", "S3 Trio3D/2X",
 			"S3 Trio3D"};
 
@@ -90,9 +90,8 @@ static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64",
 #define CHIP_988_VIRGE_VX	0x0A
 #define CHIP_375_VIRGE_DX	0x0B
 #define CHIP_385_VIRGE_GX	0x0C
-#define CHIP_356_VIRGE_GX2	0x0D
-#define CHIP_357_VIRGE_GX2P	0x0E
-#define CHIP_359_VIRGE_GX2P	0x0F
+#define CHIP_357_VIRGE_GX2	0x0D
+#define CHIP_359_VIRGE_GX2P	0x0E
 #define CHIP_360_TRIO3D_1X	0x10
 #define CHIP_362_TRIO3D_2X	0x11
 #define CHIP_368_TRIO3D_2X	0x12
@@ -359,7 +358,9 @@ static void s3_set_pixclock(struct fb_info *info, u32 pixclock)
 	vga_w(par->state.vgabase, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD);
 
 	/* Set S3 clock registers */
-	if (par->chip == CHIP_360_TRIO3D_1X ||
+	if (par->chip == CHIP_357_VIRGE_GX2 ||
+	    par->chip == CHIP_359_VIRGE_GX2P ||
+	    par->chip == CHIP_360_TRIO3D_1X ||
 	    par->chip == CHIP_362_TRIO3D_2X ||
 	    par->chip == CHIP_368_TRIO3D_2X) {
 		vga_wseq(par->state.vgabase, 0x12, (n - 2) | ((r & 3) << 6));	/* n and two bits of r */
@@ -560,7 +561,9 @@ static int s3fb_set_par(struct fb_info *info)
 	pr_debug("fb%d: offset register       : %d\n", info->node, offset_value);
 	svga_wcrt_multi(par->state.vgabase, s3_offset_regs, offset_value);
 
-	if (par->chip != CHIP_360_TRIO3D_1X &&
+	if (par->chip != CHIP_357_VIRGE_GX2 &&
+	    par->chip != CHIP_359_VIRGE_GX2P &&
+	    par->chip != CHIP_360_TRIO3D_1X &&
 	    par->chip != CHIP_362_TRIO3D_2X &&
 	    par->chip != CHIP_368_TRIO3D_2X) {
 		vga_wcrt(par->state.vgabase, 0x54, 0x18); /* M parameter */
@@ -604,7 +607,9 @@ static int s3fb_set_par(struct fb_info *info)
 		vga_wcrt(par->state.vgabase, 0x66, 0x90);
 	}
 
-	if (par->chip == CHIP_360_TRIO3D_1X ||
+	if (par->chip == CHIP_357_VIRGE_GX2 ||
+	    par->chip == CHIP_359_VIRGE_GX2P ||
+	    par->chip == CHIP_360_TRIO3D_1X ||
 	    par->chip == CHIP_362_TRIO3D_2X ||
 	    par->chip == CHIP_368_TRIO3D_2X ||
 	    par->chip == CHIP_365_TRIO3D    ||
@@ -617,8 +622,7 @@ static int s3fb_set_par(struct fb_info *info)
 		vga_wcrt(par->state.vgabase, 0x66, 0x81);
 	}
 
-	if (par->chip == CHIP_356_VIRGE_GX2  ||
-	    par->chip == CHIP_357_VIRGE_GX2P ||
+	if (par->chip == CHIP_357_VIRGE_GX2  ||
 	    par->chip == CHIP_359_VIRGE_GX2P ||
 	    par->chip == CHIP_360_TRIO3D_1X ||
 	    par->chip == CHIP_362_TRIO3D_2X ||
@@ -674,6 +678,8 @@ static int s3fb_set_par(struct fb_info *info)
 		pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
 		svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
 		if (info->var.pixclock > 20000 ||
+		    par->chip == CHIP_357_VIRGE_GX2 ||
+		    par->chip == CHIP_359_VIRGE_GX2P ||
 		    par->chip == CHIP_360_TRIO3D_1X ||
 		    par->chip == CHIP_362_TRIO3D_2X ||
 		    par->chip == CHIP_368_TRIO3D_2X)
@@ -702,7 +708,9 @@ static int s3fb_set_par(struct fb_info *info)
 		} else {
 			svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
 			svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
-			if (par->chip != CHIP_360_TRIO3D_1X &&
+			if (par->chip != CHIP_357_VIRGE_GX2 &&
+			    par->chip != CHIP_359_VIRGE_GX2P &&
+			    par->chip != CHIP_360_TRIO3D_1X &&
 			    par->chip != CHIP_362_TRIO3D_2X &&
 			    par->chip != CHIP_368_TRIO3D_2X)
 				hmul = 2;
@@ -727,7 +735,9 @@ static int s3fb_set_par(struct fb_info *info)
 		} else {
 			svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
 			svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
-			if (par->chip != CHIP_360_TRIO3D_1X &&
+			if (par->chip != CHIP_357_VIRGE_GX2 &&
+			    par->chip != CHIP_359_VIRGE_GX2P &&
+			    par->chip != CHIP_360_TRIO3D_1X &&
 			    par->chip != CHIP_362_TRIO3D_2X &&
 			    par->chip != CHIP_368_TRIO3D_2X)
 				hmul = 2;
@@ -1069,6 +1079,16 @@ static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_i
 			info->screen_size = 2 << 20;
 			break;
 		}
+	} else if (par->chip == CHIP_357_VIRGE_GX2 ||
+		   par->chip == CHIP_359_VIRGE_GX2P) {
+		switch ((regval & 0xC0) >> 6) {
+		case 1: /* 4MB */
+			info->screen_size = 4 << 20;
+			break;
+		case 3: /* 2MB */
+			info->screen_size = 2 << 20;
+			break;
+		}
 	} else
 		info->screen_size = s3_memsizes[regval >> 5] << 10;
 	info->fix.smem_len = info->screen_size;
@@ -1268,8 +1288,8 @@ static struct pci_device_id s3_devices[] __devinitdata = {
 	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x5631), .driver_data = CHIP_325_VIRGE},
 	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x883D), .driver_data = CHIP_988_VIRGE_VX},
 	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A01), .driver_data = CHIP_XXX_VIRGE_DXGX},
-	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_356_VIRGE_GX2},
-	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_357_VIRGE_GX2P},
+	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_357_VIRGE_GX2},
+	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_359_VIRGE_GX2P},
 	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P},
 	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A13), .driver_data = CHIP_36X_TRIO3D_1X_2X},
 	{PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8904), .driver_data = CHIP_365_TRIO3D},
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index b16e6138fdd..bb71fea0728 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -159,8 +159,7 @@ static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
 		else
 			dev_warn(&chan->par->pcidev->dev,
 				 "Failed to register I2C bus %s.\n", name);
-	} else
-		chan->par = NULL;
+	}
 
 	return rc;
 }
@@ -170,9 +169,8 @@ void savagefb_create_i2c_busses(struct fb_info *info)
 	struct savagefb_par *par = info->par;
 	par->chan.par	= par;
 
-	switch(info->fix.accel) {
-	case FB_ACCEL_PROSAVAGE_DDRK:
-	case FB_ACCEL_PROSAVAGE_PM:
+	switch (par->chip) {
+	case S3_PROSAVAGE:
 		par->chan.reg         = CR_SERIAL2;
 		par->chan.ioaddr      = par->mmio.vbase;
 		par->chan.algo.setsda = prosavage_gpio_setsda;
@@ -180,7 +178,7 @@ void savagefb_create_i2c_busses(struct fb_info *info)
 		par->chan.algo.getsda = prosavage_gpio_getsda;
 		par->chan.algo.getscl = prosavage_gpio_getscl;
 		break;
-	case FB_ACCEL_SAVAGE4:
+	case S3_SAVAGE4:
 		par->chan.reg = CR_SERIAL1;
 		if (par->pcidev->revision > 1 && !(VGArCR(0xa6, par) & 0x40))
 			par->chan.reg = CR_SERIAL2;
@@ -190,8 +188,8 @@ void savagefb_create_i2c_busses(struct fb_info *info)
 		par->chan.algo.getsda = prosavage_gpio_getsda;
 		par->chan.algo.getscl = prosavage_gpio_getscl;
 		break;
-	case FB_ACCEL_SAVAGE2000:
-		par->chan.reg         = 0xff20;
+	case S3_SAVAGE2000:
+		par->chan.reg         = MM_SERIAL1;
 		par->chan.ioaddr      = par->mmio.vbase;
 		par->chan.algo.setsda = savage4_gpio_setsda;
 		par->chan.algo.setscl = savage4_gpio_setscl;
diff --git a/drivers/video/savage/savagefb.h b/drivers/video/savage/savagefb.h
index e4c3f214eb8..4e9490c19d7 100644
--- a/drivers/video/savage/savagefb.h
+++ b/drivers/video/savage/savagefb.h
@@ -153,7 +153,7 @@ struct savage_reg {
 	unsigned char CRTC[25];       /* Crtc Controller */
 	unsigned char Sequencer[5];   /* Video Sequencer */
 	unsigned char Graphics[9];    /* Video Graphics */
-	unsigned char Attribute[21];  /* Video Atribute */
+	unsigned char Attribute[21];  /* Video Attribute */
 
 	unsigned int mode, refresh;
 	unsigned char SR08, SR0E, SR0F;
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index 487911e2926..a2dc1a7ec75 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -385,7 +385,7 @@ SavageSetup2DEngine(struct savagefb_par  *par)
 	BCI_SEND(GlobalBitmapDescriptor);
 
 	/*
-	 * I don't know why, sending this twice fixes the intial black screen,
+	 * I don't know why, sending this twice fixes the initial black screen,
 	 * prevents X from crashing at least in Toshiba laptops with SavageIX.
 	 * --Tony
 	 */
@@ -2211,7 +2211,7 @@ static int __devinit savagefb_probe(struct pci_dev* dev,
 		goto failed_mmio;
 
 	video_len = savage_init_hw(par);
-	/* FIXME: cant be negative */
+	/* FIXME: can't be negative */
 	if (video_len < 0) {
 		err = video_len;
 		goto failed_mmio;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 757665bc500..9bcc61b4ef1 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -643,7 +643,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 			continue;
 
 		board_cfg = &ch->cfg.board_cfg;
-		if (try_module_get(board_cfg->owner) && board_cfg->display_on) {
+		if (board_cfg->display_on && try_module_get(board_cfg->owner)) {
 			board_cfg->display_on(board_cfg->board_data, ch->info);
 			module_put(board_cfg->owner);
 		}
@@ -688,7 +688,7 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 		}
 
 		board_cfg = &ch->cfg.board_cfg;
-		if (try_module_get(board_cfg->owner) && board_cfg->display_off) {
+		if (board_cfg->display_off && try_module_get(board_cfg->owner)) {
 			board_cfg->display_off(board_cfg->board_data);
 			module_put(board_cfg->owner);
 		}
@@ -1032,6 +1032,49 @@ static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *in
 	return 0;
 }
 
+/*
+ * Screen blanking. Behavior is as follows:
+ * FB_BLANK_UNBLANK: screen unblanked, clocks enabled
+ * FB_BLANK_NORMAL: screen blanked, clocks enabled
+ * FB_BLANK_VSYNC,
+ * FB_BLANK_HSYNC,
+ * FB_BLANK_POWEROFF: screen blanked, clocks disabled
+ */
+static int sh_mobile_lcdc_blank(int blank, struct fb_info *info)
+{
+	struct sh_mobile_lcdc_chan *ch = info->par;
+	struct sh_mobile_lcdc_priv *p = ch->lcdc;
+
+	/* blank the screen? */
+	if (blank > FB_BLANK_UNBLANK && ch->blank_status == FB_BLANK_UNBLANK) {
+		struct fb_fillrect rect = {
+			.width = info->var.xres,
+			.height = info->var.yres,
+		};
+		sh_mobile_lcdc_fillrect(info, &rect);
+	}
+	/* turn clocks on? */
+	if (blank <= FB_BLANK_NORMAL && ch->blank_status > FB_BLANK_NORMAL) {
+		sh_mobile_lcdc_clk_on(p);
+	}
+	/* turn clocks off? */
+	if (blank > FB_BLANK_NORMAL && ch->blank_status <= FB_BLANK_NORMAL) {
+		/* make sure the screen is updated with the black fill before
+		 * switching the clocks off. one vsync is not enough since
+		 * blanking may occur in the middle of a refresh. deferred io
+		 * mode will reenable the clocks and update the screen in time,
+		 * so it does not need this. */
+		if (!info->fbdefio) {
+			sh_mobile_wait_for_vsync(info);
+			sh_mobile_wait_for_vsync(info);
+		}
+		sh_mobile_lcdc_clk_off(p);
+	}
+
+	ch->blank_status = blank;
+	return 0;
+}
+
 static struct fb_ops sh_mobile_lcdc_ops = {
 	.owner          = THIS_MODULE,
 	.fb_setcolreg	= sh_mobile_lcdc_setcolreg,
@@ -1040,6 +1083,7 @@ static struct fb_ops sh_mobile_lcdc_ops = {
 	.fb_fillrect	= sh_mobile_lcdc_fillrect,
 	.fb_copyarea	= sh_mobile_lcdc_copyarea,
 	.fb_imageblit	= sh_mobile_lcdc_imageblit,
+	.fb_blank	= sh_mobile_lcdc_blank,
 	.fb_pan_display = sh_mobile_fb_pan_display,
 	.fb_ioctl       = sh_mobile_ioctl,
 	.fb_open	= sh_mobile_open,
@@ -1254,7 +1298,7 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
 
 	switch(action) {
 	case FB_EVENT_SUSPEND:
-		if (try_module_get(board_cfg->owner) && board_cfg->display_off) {
+		if (board_cfg->display_off && try_module_get(board_cfg->owner)) {
 			board_cfg->display_off(board_cfg->board_data);
 			module_put(board_cfg->owner);
 		}
@@ -1267,7 +1311,7 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
 		mutex_unlock(&ch->open_lock);
 
 		/* HDMI must be enabled before LCDC configuration */
-		if (try_module_get(board_cfg->owner) && board_cfg->display_on) {
+		if (board_cfg->display_on && try_module_get(board_cfg->owner)) {
 			board_cfg->display_on(board_cfg->board_data, info);
 			module_put(board_cfg->owner);
 		}
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 4635eed63ee..f16cb5645a1 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -37,6 +37,7 @@ struct sh_mobile_lcdc_chan {
 	struct completion vsync_completion;
 	struct fb_var_screeninfo display_var;
 	int use_count;
+	int blank_status;
 	struct mutex open_lock;		/* protects the use counter */
 };
 
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 46d1a64fe80..56ef6b3a985 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -265,7 +265,7 @@ static unsigned long sm501fb_ps_to_hz(unsigned long psvalue)
 	return (unsigned long)numerator;
 }
 
-/* sm501fb_hz_to_ps is identical to the oposite transform */
+/* sm501fb_hz_to_ps is identical to the opposite transform */
 
 #define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x)
 
@@ -1719,7 +1719,7 @@ static int sm501fb_init_fb(struct fb_info *fb,
 	       (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl,
 	       sizeof(struct fb_ops));
 
-	/* update ops dependant on what we've been passed */
+	/* update ops dependent on what we've been passed */
 
 	if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0)
 		par->ops.fb_cursor = NULL;
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 2ab704118c4..2301c275d63 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -221,7 +221,7 @@ static int __sst_wait_idle(u8 __iomem *vbase)
 	while(1) {
 		if (__sst_read(vbase, STATUS) & STATUS_FBI_BUSY) {
 			f_dddprintk("status: busy\n");
-/* FIXME basicaly, this is a busy wait. maybe not that good. oh well;
+/* FIXME basically, this is a busy wait. maybe not that good. oh well;
  * this is a small loop after all.
  * Or maybe we should use mdelay() or udelay() here instead ? */
 			count = 0;
@@ -501,7 +501,7 @@ static int sstfb_set_par(struct fb_info *info)
 	}
 
 	if (IS_VOODOO2(par)) {
-		/* voodoo2 has 32 pixel wide tiles , BUT stange things
+		/* voodoo2 has 32 pixel wide tiles , BUT strange things
 		   happen with odd number of tiles */
 		par->tiles_in_X = (info->var.xres + 63 ) / 64 * 2;
 	} else {
@@ -920,11 +920,11 @@ static int __devinit sst_detect_ti(struct fb_info *info)
  * we get the 1st byte (M value) of preset f1,f7 and fB
  * why those 3 ? mmmh... for now, i'll do it the glide way...
  * and ask questions later. anyway, it seems that all the freq registers are
- * realy at their default state (cf specs) so i ask again, why those 3 regs ?
+ * really at their default state (cf specs) so i ask again, why those 3 regs ?
  * mmmmh.. it seems that's much more ugly than i thought. we use f0 and fA for
  * pll programming, so in fact, we *hope* that the f1, f7 & fB won't be
  * touched...
- * is it realy safe ? how can i reset this ramdac ? geee...
+ * is it really safe ? how can i reset this ramdac ? geee...
  */
 static int __devinit sst_detect_ics(struct fb_info *info)
 {
diff --git a/drivers/video/sticore.h b/drivers/video/sticore.h
index 7fe5be4bc70..addf7b615ef 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/sticore.h
@@ -79,7 +79,7 @@ struct sti_glob_cfg_ext {
 	 u8 curr_mon;			/* current monitor configured */
 	 u8 friendly_boot;		/* in friendly boot mode */
 	s16 power;			/* power calculation (in Watts) */
-	s32 freq_ref;			/* frequency refrence */
+	s32 freq_ref;			/* frequency reference */
 	u32 sti_mem_addr;		/* pointer to global sti memory (size=sti_mem_request) */
 	u32 future_ptr; 		/* pointer to future data */
 };
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 3ee5e63cfa4..a99b994c9b6 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -877,12 +877,12 @@ static void tdfxfb_fillrect(struct fb_info *info,
 	else
 		tdfx_rop = TDFX_ROP_XOR;
 
-	/* asume always rect->height < 4096 */
+	/* assume always rect->height < 4096 */
 	if (dy + rect->height > 4095) {
 		dstbase = stride * dy;
 		dy = 0;
 	}
-	/* asume always rect->width < 4096 */
+	/* assume always rect->width < 4096 */
 	if (dx + rect->width > 4095) {
 		dstbase += dx * bpp >> 3;
 		dx = 0;
@@ -915,22 +915,22 @@ static void tdfxfb_copyarea(struct fb_info *info,
 	u32 dstbase = 0;
 	u32 srcbase = 0;
 
-	/* asume always area->height < 4096 */
+	/* assume always area->height < 4096 */
 	if (sy + area->height > 4095) {
 		srcbase = stride * sy;
 		sy = 0;
 	}
-	/* asume always area->width < 4096 */
+	/* assume always area->width < 4096 */
 	if (sx + area->width > 4095) {
 		srcbase += sx * bpp >> 3;
 		sx = 0;
 	}
-	/* asume always area->height < 4096 */
+	/* assume always area->height < 4096 */
 	if (dy + area->height > 4095) {
 		dstbase = stride * dy;
 		dy = 0;
 	}
-	/* asume always area->width < 4096 */
+	/* assume always area->width < 4096 */
 	if (dx + area->width > 4095) {
 		dstbase += dx * bpp >> 3;
 		dx = 0;
@@ -1003,12 +1003,12 @@ static void tdfxfb_imageblit(struct fb_info *info, const struct fb_image *image)
 #else
 	srcfmt = 0x400000;
 #endif
-	/* asume always image->height < 4096 */
+	/* assume always image->height < 4096 */
 	if (dy + image->height > 4095) {
 		dstbase = stride * dy;
 		dy = 0;
 	}
-	/* asume always image->width < 4096 */
+	/* assume always image->width < 4096 */
 	if (dx + image->width > 4095) {
 		dstbase += dx * bpp >> 3;
 		dx = 0;
@@ -1124,7 +1124,7 @@ static int tdfxfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 		 * lower half (least significant 64 bits) of a 128 bit word
 		 * and pattern 1 the upper half. If you examine the data of
 		 * the cursor image the graphics card uses then from the
-		 * begining you see line one of pattern 0, line one of
+		 * beginning you see line one of pattern 0, line one of
 		 * pattern 1, line two of pattern 0, line two of pattern 1,
 		 * etc etc. The linear stride for the cursor is always 16 bytes
 		 * (128 bits) which is the maximum cursor width times two for
diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
index 9710bf8caea..0c341d73960 100644
--- a/drivers/video/tmiofb.c
+++ b/drivers/video/tmiofb.c
@@ -359,7 +359,7 @@ tmiofb_acc_wait(struct fb_info *info, unsigned int ccs)
 {
 	struct tmiofb_par *par = info->par;
 	/*
-	 * This code can be called whith interrupts disabled.
+	 * This code can be called with interrupts disabled.
 	 * So instead of relaying on irq to trigger the event,
 	 * poll the state till the necessary command is executed.
 	 */
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 2c8364e9b63..695066b5b2e 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -27,6 +27,7 @@
 #include <linux/fb.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/prefetch.h>
 #include <linux/delay.h>
 #include <video/udlfb.h>
 #include "edid.h"
@@ -769,7 +770,7 @@ static int dlfb_ops_ioctl(struct fb_info *info, unsigned int cmd,
 
 		/*
 		 * If we have a damage-aware client, turn fb_defio "off"
-		 * To avoid perf imact of unecessary page fault handling.
+		 * To avoid perf imact of unnecessary page fault handling.
 		 * Done by resetting the delay for this fb_info to a very
 		 * long period. Pages will become writable and stay that way.
 		 * Reset to normal value when all clients have closed this fb.
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 28ccab44a39..53b2c5aae06 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -152,7 +152,7 @@ static inline int setop(int op)
 }
 
 /* Set the Enable Set/Reset Register and return its old value.  
-   The code here always uses value 0xf for thsi register. */
+   The code here always uses value 0xf for this register. */
 static inline int setsr(int sr)
 {
 	int oldsr;
diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index 781f3aa66b4..29d70244a21 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -139,7 +139,6 @@ struct chip_information {
 
 struct crt_setting_information {
 	int iga_path;
-	int refresh_rate;
 };
 
 struct tmds_setting_information {
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 5728fd76bc1..dc4c778877c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -2002,13 +2002,15 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 	int i;
 	int index = 0;
 	int h_addr, v_addr;
-	u32 pll_D_N, clock;
+	u32 pll_D_N, clock, refresh = viafb_refresh;
+
+	if (viafb_SAMM_ON && set_iga == IGA2)
+		refresh = viafb_refresh1;
 
 	for (i = 0; i < video_mode->mode_array; i++) {
 		index = i;
 
-		if (crt_table[i].refresh_rate == viaparinfo->
-			crt_setting_info->refresh_rate)
+		if (crt_table[i].refresh_rate == refresh)
 			break;
 	}
 
@@ -2019,7 +2021,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 	if ((viafb_LCD_ON | viafb_DVI_ON)
 	    && video_mode->crtc[0].crtc.hor_addr == 640
 	    && video_mode->crtc[0].crtc.ver_addr == 480
-	    && viaparinfo->crt_setting_info->refresh_rate == 60) {
+	    && refresh == 60) {
 		/* The border is 8 pixels. */
 		crt_reg.hor_blank_start = crt_reg.hor_blank_start - 8;
 
@@ -2070,7 +2072,6 @@ void __devinit viafb_init_chip_info(int chip_type)
 	init_lvds_chip_info();
 
 	viaparinfo->crt_setting_info->iga_path = IGA1;
-	viaparinfo->crt_setting_info->refresh_rate = viafb_refresh;
 
 	/*Set IGA path for each device */
 	viafb_set_iga_path();
@@ -2083,13 +2084,9 @@ void __devinit viafb_init_chip_info(int chip_type)
 		viaparinfo->lvds_setting_info->lcd_mode;
 }
 
-void viafb_update_device_setting(int hres, int vres,
-	int bpp, int vmode_refresh, int flag)
+void viafb_update_device_setting(int hres, int vres, int bpp, int flag)
 {
 	if (flag == 0) {
-		viaparinfo->crt_setting_info->refresh_rate =
-			vmode_refresh;
-
 		viaparinfo->tmds_setting_info->h_active = hres;
 		viaparinfo->tmds_setting_info->v_active = vres;
 
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index 7295263299f..8858593405a 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -949,8 +949,7 @@ void __devinit viafb_init_chip_info(int chip_type);
 void __devinit viafb_init_dac(int set_iga);
 int viafb_get_pixclock(int hres, int vres, int vmode_refresh);
 int viafb_get_refresh(int hres, int vres, u32 float_refresh);
-void viafb_update_device_setting(int hres, int vres, int bpp,
-			   int vmode_refresh, int flag);
+void viafb_update_device_setting(int hres, int vres, int bpp, int flag);
 
 void viafb_set_iga_path(void);
 void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue);
diff --git a/drivers/video/via/via_utility.c b/drivers/video/via/via_utility.c
index d05ccb62b55..35458a5eadc 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/via/via_utility.c
@@ -174,7 +174,7 @@ void viafb_set_gamma_table(int bpp, unsigned int *gamma_table)
 	}
 
 	/* If adjust Gamma value in SAMM, fill IGA1,
-	   IGA2 Gamma table simultanous. */
+	   IGA2 Gamma table simultaneous. */
 	/* Switch to IGA2 Gamma Table */
 	if ((active_device_amount > 1) &&
 		!((viaparinfo->chip_info->gfx_chip_name ==
diff --git a/drivers/video/via/via_utility.h b/drivers/video/via/via_utility.h
index 1670ba82143..f23be1708c1 100644
--- a/drivers/video/via/via_utility.h
+++ b/drivers/video/via/via_utility.h
@@ -21,7 +21,7 @@
 #ifndef __VIAUTILITY_H__
 #define __VIAUTILITY_H__
 
-/* These functions are used to get infomation about device's state */
+/* These functions are used to get information about device's state */
 void viafb_get_device_support_state(u32 *support_state);
 void viafb_get_device_connect_state(u32 *connect_state);
 bool viafb_lcd_get_support_expand_state(u32 xres, u32 yres);
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index f555b891cc7..a542bed086e 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -182,13 +182,24 @@ static int viafb_release(struct fb_info *info, int user)
 	return 0;
 }
 
+static inline int get_var_refresh(struct fb_var_screeninfo *var)
+{
+	u32 htotal, vtotal;
+
+	htotal = var->left_margin + var->xres + var->right_margin
+		+ var->hsync_len;
+	vtotal = var->upper_margin + var->yres + var->lower_margin
+		+ var->vsync_len;
+	return PICOS2KHZ(var->pixclock) * 1000 / (htotal * vtotal);
+}
+
 static int viafb_check_var(struct fb_var_screeninfo *var,
 	struct fb_info *info)
 {
-	int htotal, vtotal, depth;
+	int depth, refresh;
 	struct VideoModeTable *vmode_entry;
 	struct viafb_par *ppar = info->par;
-	u32 long_refresh, line;
+	u32 line;
 
 	DEBUG_MSG(KERN_INFO "viafb_check_var!\n");
 	/* Sanity check */
@@ -231,17 +242,11 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 	/* Based on var passed in to calculate the refresh,
 	 * because our driver use some modes special.
 	 */
-	htotal = var->xres + var->left_margin +
-	var->right_margin + var->hsync_len;
-	vtotal = var->yres + var->upper_margin +
-		var->lower_margin + var->vsync_len;
-	long_refresh = 1000000000UL / var->pixclock * 1000;
-	long_refresh /= (htotal * vtotal);
-
-	viafb_refresh = viafb_get_refresh(var->xres, var->yres, long_refresh);
+	refresh = viafb_get_refresh(var->xres, var->yres,
+		get_var_refresh(var));
 
 	/* Adjust var according to our driver's own table */
-	viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
+	viafb_fill_var_timing_info(var, refresh, vmode_entry);
 	if (var->accel_flags & FB_ACCELF_TEXT &&
 		!ppar->shared->vdev->engine_mmio)
 		var->accel_flags = 0;
@@ -253,12 +258,13 @@ static int viafb_set_par(struct fb_info *info)
 {
 	struct viafb_par *viapar = info->par;
 	struct VideoModeTable *vmode_entry, *vmode_entry1 = NULL;
+	int refresh;
 	DEBUG_MSG(KERN_INFO "viafb_set_par!\n");
 
 	viafb_update_fix(info);
 	viapar->depth = fb_get_color_depth(&info->var, &info->fix);
 	viafb_update_device_setting(viafbinfo->var.xres, viafbinfo->var.yres,
-		viafbinfo->var.bits_per_pixel, viafb_refresh, 0);
+		viafbinfo->var.bits_per_pixel, 0);
 
 	vmode_entry = viafb_get_mode(viafbinfo->var.xres, viafbinfo->var.yres);
 	if (viafb_dual_fb) {
@@ -266,7 +272,7 @@ static int viafb_set_par(struct fb_info *info)
 			viafbinfo1->var.yres);
 		viafb_update_device_setting(viafbinfo1->var.xres,
 			viafbinfo1->var.yres, viafbinfo1->var.bits_per_pixel,
-			viafb_refresh1, 1);
+			1);
 	} else if (viafb_SAMM_ON == 1) {
 		DEBUG_MSG(KERN_INFO
 		"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
@@ -275,14 +281,19 @@ static int viafb_set_par(struct fb_info *info)
 			viafb_second_yres);
 
 		viafb_update_device_setting(viafb_second_xres,
-			viafb_second_yres, viafb_bpp1, viafb_refresh1, 1);
+			viafb_second_yres, viafb_bpp1, 1);
 	}
 
+	refresh = viafb_get_refresh(info->var.xres, info->var.yres,
+		get_var_refresh(&info->var));
 	if (vmode_entry) {
-		if (viafb_dual_fb && viapar->iga_path == IGA2)
+		if (viafb_dual_fb && viapar->iga_path == IGA2) {
 			viafb_bpp1 = info->var.bits_per_pixel;
-		else
+			viafb_refresh1 = refresh;
+		} else {
 			viafb_bpp = info->var.bits_per_pixel;
+			viafb_refresh = refresh;
+		}
 
 		if (info->var.accel_flags & FB_ACCELF_TEXT)
 			info->flags &= ~FBINFO_HWACCEL_DISABLED;
@@ -1795,14 +1806,9 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 	default_var.xres_virtual = default_xres;
 	default_var.yres_virtual = default_yres;
 	default_var.bits_per_pixel = viafb_bpp;
-	default_var.pixclock =
-	    viafb_get_pixclock(default_xres, default_yres, viafb_refresh);
-	default_var.left_margin = (default_xres >> 3) & 0xf8;
-	default_var.right_margin = 32;
-	default_var.upper_margin = 16;
-	default_var.lower_margin = 4;
-	default_var.hsync_len = default_var.left_margin;
-	default_var.vsync_len = 4;
+	viafb_fill_var_timing_info(&default_var, viafb_get_refresh(
+		default_var.xres, default_var.yres, viafb_refresh),
+		viafb_get_mode(default_var.xres, default_var.yres));
 	viafb_setup_fixinfo(&viafbinfo->fix, viaparinfo);
 	viafbinfo->var = default_var;
 
@@ -1841,15 +1847,9 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 		default_var.xres_virtual = viafb_second_virtual_xres;
 		default_var.yres_virtual = viafb_second_virtual_yres;
 		default_var.bits_per_pixel = viafb_bpp1;
-		default_var.pixclock =
-		    viafb_get_pixclock(viafb_second_xres, viafb_second_yres,
-		    viafb_refresh);
-		default_var.left_margin = (viafb_second_xres >> 3) & 0xf8;
-		default_var.right_margin = 32;
-		default_var.upper_margin = 16;
-		default_var.lower_margin = 4;
-		default_var.hsync_len = default_var.left_margin;
-		default_var.vsync_len = 4;
+		viafb_fill_var_timing_info(&default_var, viafb_get_refresh(
+			default_var.xres, default_var.yres, viafb_refresh1),
+			viafb_get_mode(default_var.xres, default_var.yres));
 
 		viafb_setup_fixinfo(&viafbinfo1->fix, viaparinfo1);
 		viafb_check_var(&default_var, viafbinfo1);
@@ -2004,22 +2004,24 @@ static int __init viafb_setup(char *options)
  */
 int __init viafb_init(void)
 {
-	u32 dummy;
+	u32 dummy_x, dummy_y;
 #ifndef MODULE
 	char *option = NULL;
 	if (fb_get_options("viafb", &option))
 		return -ENODEV;
 	viafb_setup(option);
 #endif
-	if (parse_mode(viafb_mode, &dummy, &dummy)
-		|| parse_mode(viafb_mode1, &dummy, &dummy)
+	if (parse_mode(viafb_mode, &dummy_x, &dummy_y)
+		|| !viafb_get_mode(dummy_x, dummy_y)
+		|| parse_mode(viafb_mode1, &dummy_x, &dummy_y)
+		|| !viafb_get_mode(dummy_x, dummy_y)
 		|| viafb_bpp < 0 || viafb_bpp > 32
 		|| viafb_bpp1 < 0 || viafb_bpp1 > 32
 		|| parse_active_dev())
 		return -EINVAL;
 
 	printk(KERN_INFO
-       "VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
+       "VIA Graphics Integration Chipset framebuffer %d.%d initializing\n",
 	       VERSION_MAJOR, VERSION_MINOR);
 	return 0;
 }
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index d8b12c32e3e..c8be8af0cc6 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -1306,7 +1306,7 @@ static void w100_init_lcd(struct w100fb_par *par)
 	union graphic_v_disp_u graphic_v_disp;
 	union crtc_total_u crtc_total;
 
-	/* w3200 doesnt like undefined bits being set so zero register values first */
+	/* w3200 doesn't like undefined bits being set so zero register values first */
 
 	active_h_disp.val = 0;
 	active_h_disp.f.active_h_start=mode->left_margin;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 4fb5b2bf234..4bcc8b82640 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -590,15 +590,10 @@ static struct virtio_config_ops virtio_pci_config_ops = {
 
 static void virtio_pci_release_dev(struct device *_d)
 {
-	struct virtio_device *dev = container_of(_d, struct virtio_device, dev);
+	struct virtio_device *dev = container_of(_d, struct virtio_device,
+						 dev);
 	struct virtio_pci_device *vp_dev = to_vp_device(dev);
-	struct pci_dev *pci_dev = vp_dev->pci_dev;
 
-	vp_del_vqs(dev);
-	pci_set_drvdata(pci_dev, NULL);
-	pci_iounmap(pci_dev, vp_dev->ioaddr);
-	pci_release_regions(pci_dev);
-	pci_disable_device(pci_dev);
 	kfree(vp_dev);
 }
 
@@ -681,6 +676,12 @@ static void __devexit virtio_pci_remove(struct pci_dev *pci_dev)
 	struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
 
 	unregister_virtio_device(&vp_dev->vdev);
+
+	vp_del_vqs(&vp_dev->vdev);
+	pci_set_drvdata(pci_dev, NULL);
+	pci_iounmap(pci_dev, vp_dev->ioaddr);
+	pci_release_regions(pci_dev);
+	pci_disable_device(pci_dev);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index cc2f73e0347..b0043fb26a4 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -371,6 +371,7 @@ void *virtqueue_detach_unused_buf(struct virtqueue *_vq)
 		/* detach_buf clears data, so grab it now. */
 		buf = vq->data[i];
 		detach_buf(vq, i);
+		vq->vring.avail->idx--;
 		END_USE(vq);
 		return buf;
 	}
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 38e96ab9094..5ef385bfed1 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -545,7 +545,7 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 		return;
 	}
 
-	/* Second write, data transfered. Release the module */
+	/* Second write, data transferred. Release the module */
 	if (hdq_data->init_trans > 1) {
 		omap_hdq_put(hdq_data);
 		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b69d7148255..022f9eb0b7b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -933,7 +933,7 @@ config PNX833X_WDT
 	depends on SOC_PNX8335
 	help
 	  Hardware driver for the PNX833x's watchdog. This is a
-	  watchdog timer that will reboot the machine after a programable
+	  watchdog timer that will reboot the machine after a programmable
 	  timer has expired and no process has written to /dev/watchdog during
 	  that time.
 
@@ -990,6 +990,12 @@ config BCM63XX_WDT
 	  To compile this driver as a loadable module, choose M here.
 	  The module will be called bcm63xx_wdt.
 
+config LANTIQ_WDT
+	tristate "Lantiq SoC watchdog"
+	depends on LANTIQ
+	help
+	  Hardware driver for the Lantiq SoC Watchdog Timer.
+
 # PARISC Architecture
 
 # POWERPC Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index d520bf9c335..ed26f7094e4 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -4,7 +4,7 @@
 
 # Only one watchdog can succeed. We probe the ISA/PCI/USB based
 # watchdog-cards first, then the architecture specific watchdog
-# drivers and then the architecture independant "softdog" driver.
+# drivers and then the architecture independent "softdog" driver.
 # This means that if your ISA/PCI/USB card isn't detected that
 # you can fall back to an architecture specific driver and if
 # that also fails then you can fall back to the software watchdog
@@ -123,6 +123,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
 octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
 
 # PARISC Architecture
 
@@ -153,7 +154,7 @@ obj-$(CONFIG_WATCHDOG_CP1XXX)		+= cpwd.o
 # Xen
 obj-$(CONFIG_XEN_WDT) += xen_wdt.o
 
-# Architecture Independant
+# Architecture Independent
 obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
 obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 2ffce4d7544..b6a2b58cbe6 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -26,7 +26,7 @@
  *	Theory of Operation:
  *		The Watch-Dog Timer is provided to ensure that standalone
  *		Systems can always recover from catastrophic conditions that
- *		caused the CPU to crash. This condition may have occured by
+ *		caused the CPU to crash. This condition may have occurred by
  *		external EMI or a software bug. When the CPU stops working
  *		correctly, hardware on the board will either perform a hardware
  *		reset (cold boot) or a non-maskable interrupt (NMI) to bring the
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 35a0d12dad7..5fd020da7c5 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -35,6 +35,7 @@
  *	document number 324645-001, 324646-001: Cougar Point (CPT)
  *	document number TBD                   : Patsburg (PBG)
  *	document number TBD                   : DH89xxCC
+ *	document number TBD                   : Panther Point
  */
 
 /*
@@ -153,6 +154,38 @@ enum iTCO_chipsets {
 	TCO_PBG1,	/* Patsburg */
 	TCO_PBG2,	/* Patsburg */
 	TCO_DH89XXCC,	/* DH89xxCC */
+	TCO_PPT0,	/* Panther Point */
+	TCO_PPT1,	/* Panther Point */
+	TCO_PPT2,	/* Panther Point */
+	TCO_PPT3,	/* Panther Point */
+	TCO_PPT4,	/* Panther Point */
+	TCO_PPT5,	/* Panther Point */
+	TCO_PPT6,	/* Panther Point */
+	TCO_PPT7,	/* Panther Point */
+	TCO_PPT8,	/* Panther Point */
+	TCO_PPT9,	/* Panther Point */
+	TCO_PPT10,	/* Panther Point */
+	TCO_PPT11,	/* Panther Point */
+	TCO_PPT12,	/* Panther Point */
+	TCO_PPT13,	/* Panther Point */
+	TCO_PPT14,	/* Panther Point */
+	TCO_PPT15,	/* Panther Point */
+	TCO_PPT16,	/* Panther Point */
+	TCO_PPT17,	/* Panther Point */
+	TCO_PPT18,	/* Panther Point */
+	TCO_PPT19,	/* Panther Point */
+	TCO_PPT20,	/* Panther Point */
+	TCO_PPT21,	/* Panther Point */
+	TCO_PPT22,	/* Panther Point */
+	TCO_PPT23,	/* Panther Point */
+	TCO_PPT24,	/* Panther Point */
+	TCO_PPT25,	/* Panther Point */
+	TCO_PPT26,	/* Panther Point */
+	TCO_PPT27,	/* Panther Point */
+	TCO_PPT28,	/* Panther Point */
+	TCO_PPT29,	/* Panther Point */
+	TCO_PPT30,	/* Panther Point */
+	TCO_PPT31,	/* Panther Point */
 };
 
 static struct {
@@ -244,6 +277,38 @@ static struct {
 	{"Patsburg", 2},
 	{"Patsburg", 2},
 	{"DH89xxCC", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
+	{"Panther Point", 2},
 	{NULL, 0}
 };
 
@@ -363,6 +428,38 @@ static DEFINE_PCI_DEVICE_TABLE(iTCO_wdt_pci_tbl) = {
 	{ ITCO_PCI_DEVICE(0x1d40,				TCO_PBG1)},
 	{ ITCO_PCI_DEVICE(0x1d41,				TCO_PBG2)},
 	{ ITCO_PCI_DEVICE(0x2310,				TCO_DH89XXCC)},
+	{ ITCO_PCI_DEVICE(0x1e40,				TCO_PPT0)},
+	{ ITCO_PCI_DEVICE(0x1e41,				TCO_PPT1)},
+	{ ITCO_PCI_DEVICE(0x1e42,				TCO_PPT2)},
+	{ ITCO_PCI_DEVICE(0x1e43,				TCO_PPT3)},
+	{ ITCO_PCI_DEVICE(0x1e44,				TCO_PPT4)},
+	{ ITCO_PCI_DEVICE(0x1e45,				TCO_PPT5)},
+	{ ITCO_PCI_DEVICE(0x1e46,				TCO_PPT6)},
+	{ ITCO_PCI_DEVICE(0x1e47,				TCO_PPT7)},
+	{ ITCO_PCI_DEVICE(0x1e48,				TCO_PPT8)},
+	{ ITCO_PCI_DEVICE(0x1e49,				TCO_PPT9)},
+	{ ITCO_PCI_DEVICE(0x1e4a,				TCO_PPT10)},
+	{ ITCO_PCI_DEVICE(0x1e4b,				TCO_PPT11)},
+	{ ITCO_PCI_DEVICE(0x1e4c,				TCO_PPT12)},
+	{ ITCO_PCI_DEVICE(0x1e4d,				TCO_PPT13)},
+	{ ITCO_PCI_DEVICE(0x1e4e,				TCO_PPT14)},
+	{ ITCO_PCI_DEVICE(0x1e4f,				TCO_PPT15)},
+	{ ITCO_PCI_DEVICE(0x1e50,				TCO_PPT16)},
+	{ ITCO_PCI_DEVICE(0x1e51,				TCO_PPT17)},
+	{ ITCO_PCI_DEVICE(0x1e52,				TCO_PPT18)},
+	{ ITCO_PCI_DEVICE(0x1e53,				TCO_PPT19)},
+	{ ITCO_PCI_DEVICE(0x1e54,				TCO_PPT20)},
+	{ ITCO_PCI_DEVICE(0x1e55,				TCO_PPT21)},
+	{ ITCO_PCI_DEVICE(0x1e56,				TCO_PPT22)},
+	{ ITCO_PCI_DEVICE(0x1e57,				TCO_PPT23)},
+	{ ITCO_PCI_DEVICE(0x1e58,				TCO_PPT24)},
+	{ ITCO_PCI_DEVICE(0x1e59,				TCO_PPT25)},
+	{ ITCO_PCI_DEVICE(0x1e5a,				TCO_PPT26)},
+	{ ITCO_PCI_DEVICE(0x1e5b,				TCO_PPT27)},
+	{ ITCO_PCI_DEVICE(0x1e5c,				TCO_PPT28)},
+	{ ITCO_PCI_DEVICE(0x1e5d,				TCO_PPT29)},
+	{ ITCO_PCI_DEVICE(0x1e5e,				TCO_PPT30)},
+	{ ITCO_PCI_DEVICE(0x1e5f,				TCO_PPT31)},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
new file mode 100644
index 00000000000..7d82adac1cb
--- /dev/null
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -0,0 +1,261 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Based on EP93xx wdt driver
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <lantiq.h>
+
+/* Section 3.4 of the datasheet
+ * The password sequence protects the WDT control register from unintended
+ * write actions, which might cause malfunction of the WDT.
+ *
+ * essentially the following two magic passwords need to be written to allow
+ * IO access to the WDT core
+ */
+#define LTQ_WDT_PW1		0x00BE0000
+#define LTQ_WDT_PW2		0x00DC0000
+
+#define LTQ_WDT_CR		0x0	/* watchdog control register */
+#define LTQ_WDT_SR		0x8	/* watchdog status register */
+
+#define LTQ_WDT_SR_EN		(0x1 << 31)	/* enable bit */
+#define LTQ_WDT_SR_PWD		(0x3 << 26)	/* turn on power */
+#define LTQ_WDT_SR_CLKDIV	(0x3 << 24)	/* turn on clock and set */
+						/* divider to 0x40000 */
+#define LTQ_WDT_DIVIDER		0x40000
+#define LTQ_MAX_TIMEOUT		((1 << 16) - 1)	/* the reload field is 16 bit */
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+static void __iomem *ltq_wdt_membase;
+static unsigned long ltq_io_region_clk_rate;
+
+static unsigned long ltq_wdt_bootstatus;
+static unsigned long ltq_wdt_in_use;
+static int ltq_wdt_timeout = 30;
+static int ltq_wdt_ok_to_close;
+
+static void
+ltq_wdt_enable(void)
+{
+	ltq_wdt_timeout = ltq_wdt_timeout *
+			(ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
+	if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT)
+		ltq_wdt_timeout = LTQ_MAX_TIMEOUT;
+
+	/* write the first password magic */
+	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+	/* write the second magic plus the configuration and new timeout */
+	ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
+		LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static void
+ltq_wdt_disable(void)
+{
+	/* write the first password magic */
+	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+	/* write the second password magic with no config
+	 * this turns the watchdog off
+	 */
+	ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static ssize_t
+ltq_wdt_write(struct file *file, const char __user *data,
+		size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			ltq_wdt_ok_to_close = 0;
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					ltq_wdt_ok_to_close = 1;
+				else
+					ltq_wdt_ok_to_close = 0;
+			}
+		}
+		ltq_wdt_enable();
+	}
+
+	return len;
+}
+
+static struct watchdog_info ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			WDIOF_CARDRESET,
+	.identity = "ltq_wdt",
+};
+
+static long
+ltq_wdt_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	int ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
+				sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(ltq_wdt_bootstatus, (int __user *)arg);
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int __user *)arg);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(ltq_wdt_timeout, (int __user *)arg);
+		if (!ret)
+			ltq_wdt_enable();
+		/* intentional drop through */
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(ltq_wdt_timeout, (int __user *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		ltq_wdt_enable();
+		ret = 0;
+		break;
+	}
+	return ret;
+}
+
+static int
+ltq_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &ltq_wdt_in_use))
+		return -EBUSY;
+	ltq_wdt_in_use = 1;
+	ltq_wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int
+ltq_wdt_release(struct inode *inode, struct file *file)
+{
+	if (ltq_wdt_ok_to_close)
+		ltq_wdt_disable();
+	else
+		pr_err("ltq_wdt: watchdog closed without warning\n");
+	ltq_wdt_ok_to_close = 0;
+	clear_bit(0, &ltq_wdt_in_use);
+
+	return 0;
+}
+
+static const struct file_operations ltq_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ltq_wdt_write,
+	.unlocked_ioctl	= ltq_wdt_ioctl,
+	.open		= ltq_wdt_open,
+	.release	= ltq_wdt_release,
+	.llseek		= no_llseek,
+};
+
+static struct miscdevice ltq_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &ltq_wdt_fops,
+};
+
+static int __init
+ltq_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct clk *clk;
+
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory region");
+		return -ENOENT;
+	}
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory region");
+		return -EBUSY;
+	}
+	ltq_wdt_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+		resource_size(res));
+	if (!ltq_wdt_membase) {
+		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+		return -ENOMEM;
+	}
+
+	/* we do not need to enable the clock as it is always running */
+	clk = clk_get(&pdev->dev, "io");
+	WARN_ON(!clk);
+	ltq_io_region_clk_rate = clk_get_rate(clk);
+	clk_put(clk);
+
+	if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST)
+		ltq_wdt_bootstatus = WDIOF_CARDRESET;
+
+	return misc_register(&ltq_wdt_miscdev);
+}
+
+static int __devexit
+ltq_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&ltq_wdt_miscdev);
+
+	if (ltq_wdt_membase)
+		iounmap(ltq_wdt_membase);
+
+	return 0;
+}
+
+
+static struct platform_driver ltq_wdt_driver = {
+	.remove = __devexit_p(ltq_wdt_remove),
+	.driver = {
+		.name = "ltq_wdt",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init
+init_ltq_wdt(void)
+{
+	return platform_driver_probe(&ltq_wdt_driver, ltq_wdt_probe);
+}
+
+static void __exit
+exit_ltq_wdt(void)
+{
+	return platform_driver_unregister(&ltq_wdt_driver);
+}
+
+module_init(init_ltq_wdt);
+module_exit(exit_ltq_wdt);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 6709d723e01..eed5436ffb5 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -185,15 +185,18 @@ static struct miscdevice mpc8xxx_wdt_miscdev = {
 	.fops	= &mpc8xxx_wdt_fops,
 };
 
+static const struct of_device_id mpc8xxx_wdt_match[];
 static int __devinit mpc8xxx_wdt_probe(struct platform_device *ofdev)
 {
 	int ret;
+	const struct of_device_id *match;
 	struct device_node *np = ofdev->dev.of_node;
 	struct mpc8xxx_wdt_type *wdt_type;
 	u32 freq = fsl_get_sys_freq();
 	bool enabled;
 
-	if (!ofdev->dev.of_match)
+	match = of_match_device(mpc8xxx_wdt_match, &ofdev->dev);
+	if (!match)
 		return -EINVAL;
 	wdt_type = match->data;
 
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 5ec5ac1f787..1479dc4d612 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -66,6 +66,7 @@ static struct {
 	int default_ticks;
 	unsigned long inuse;
 	unsigned gpio;
+	int gstate;
 } mtx1_wdt_device;
 
 static void mtx1_wdt_trigger(unsigned long unused)
@@ -75,13 +76,13 @@ static void mtx1_wdt_trigger(unsigned long unused)
 	spin_lock(&mtx1_wdt_device.lock);
 	if (mtx1_wdt_device.running)
 		ticks--;
-	/*
-	 * toggle GPIO2_15
-	 */
-	tmp = au_readl(GPIO2_DIR);
-	tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
-	      ((~tmp) & (1 << mtx1_wdt_device.gpio));
-	au_writel(tmp, GPIO2_DIR);
+
+	/* toggle wdt gpio */
+	mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate;
+	if (mtx1_wdt_device.gstate)
+		gpio_direction_output(mtx1_wdt_device.gpio, 1);
+	else
+		gpio_direction_input(mtx1_wdt_device.gpio);
 
 	if (mtx1_wdt_device.queue && ticks)
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -103,7 +104,8 @@ static void mtx1_wdt_start(void)
 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (!mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 1;
-		gpio_set_value(mtx1_wdt_device.gpio, 1);
+		mtx1_wdt_device.gstate = 1;
+		gpio_direction_output(mtx1_wdt_device.gpio, 1);
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
 	}
 	mtx1_wdt_device.running++;
@@ -117,7 +119,8 @@ static int mtx1_wdt_stop(void)
 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
-		gpio_set_value(mtx1_wdt_device.gpio, 0);
+		mtx1_wdt_device.gstate = 0;
+		gpio_direction_output(mtx1_wdt_device.gpio, 0);
 	}
 	ticks = mtx1_wdt_device.default_ticks;
 	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 139d773300c..b7c13905157 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -49,7 +49,7 @@
 #define WDT_DATA_IO_PORT    (WDT_INDEX_IO_PORT+1)
 #define SWC_LDN             0x04
 #define SIOCFG2             0x22	/* Serial IO register */
-#define WDCTL               0x10	/* Watchdog-Timer-Controll-Register */
+#define WDCTL               0x10	/* Watchdog-Timer-Control-Register */
 #define WDTO                0x11	/* Watchdog timeout register */
 #define WDCFG               0x12	/* Watchdog config register */
 
diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c
index 67ddeb1c830..ff11504c376 100644
--- a/drivers/watchdog/sbc7240_wdt.c
+++ b/drivers/watchdog/sbc7240_wdt.c
@@ -273,7 +273,7 @@ static int __init sbc7240_wdt_init(void)
 
 	/* The IO port 0x043 used to disable the watchdog
 	 * is already claimed by the system timer, so we
-	 * cant request_region() it ...*/
+	 * can't request_region() it ...*/
 
 	if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) {
 		timeout = SBC7240_TIMEOUT;
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index b61ab1c5429..c7cf4b01f58 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -201,7 +201,7 @@ static void sch311x_wdt_get_status(int *status)
 	spin_lock(&sch311x_wdt_data.io_lock);
 
 	/* -- Watchdog timer control --
-	 * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
+	 * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occurred
 	 * Bit 1   Reserved
 	 * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
 	 * Bit 3   P20 Force Timeout enabled:
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index 4e3e7eb5919..db84f2322d1 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c
@@ -50,7 +50,7 @@
  * necssary.
  *
  * As a result of this timing problem, the only modes that are particularly
- * feasible are the 4096 and the 2048 divisors, which yeild 5.25 and 2.62ms
+ * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
  * overflow periods respectively.
  *
  * Also, since we can't really expect userspace to be responsive enough
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index df88cfa05f3..e97b0499bd0 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -191,7 +191,7 @@ static inline void wdt_timer_conf(unsigned char conf)
 static inline void wdt_timer_ctrl(unsigned char reg)
 {
 	/* -- Watchdog timer control --
-	 * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
+	 * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occurred
 	 * Bit 1   Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
 	 * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
 	 * Bit 3   P20 Force Timeout enabled:
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 0a0efe713bc..0d80e08b643 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -90,7 +90,7 @@ static void wdt_setload(unsigned int timeout)
 	/*
 	 * sp805 runs counter with given value twice, after the end of first
 	 * counter it gives an interrupt and then starts counter again. If
-	 * interrupt already occured then it resets the system. This is why
+	 * interrupt already occurred then it resets the system. This is why
 	 * load is half of what should be required.
 	 */
 	load = div_u64(rate, 2) * timeout - 1;
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index f420f1ff7f1..4781f806701 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -4,21 +4,21 @@ obj-y	+= xenbus/
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_features.o			:= $(nostackp)
 
-obj-$(CONFIG_BLOCK)		+= biomerge.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= cpu_hotplug.o
-obj-$(CONFIG_XEN_XENCOMM)	+= xencomm.o
-obj-$(CONFIG_XEN_BALLOON)	+= xen-balloon.o
-obj-$(CONFIG_XEN_DEV_EVTCHN)	+= xen-evtchn.o
-obj-$(CONFIG_XEN_GNTDEV)	+= xen-gntdev.o
+obj-$(CONFIG_BLOCK)			+= biomerge.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= cpu_hotplug.o
+obj-$(CONFIG_XEN_XENCOMM)		+= xencomm.o
+obj-$(CONFIG_XEN_BALLOON)		+= xen-balloon.o
+obj-$(CONFIG_XEN_DEV_EVTCHN)		+= xen-evtchn.o
+obj-$(CONFIG_XEN_GNTDEV)		+= xen-gntdev.o
 obj-$(CONFIG_XEN_GRANT_DEV_ALLOC)	+= xen-gntalloc.o
-obj-$(CONFIG_XENFS)		+= xenfs/
+obj-$(CONFIG_XENFS)			+= xenfs/
 obj-$(CONFIG_XEN_SYS_HYPERVISOR)	+= sys-hypervisor.o
-obj-$(CONFIG_XEN_PLATFORM_PCI)	+= xen-platform-pci.o
-obj-$(CONFIG_SWIOTLB_XEN)	+= swiotlb-xen.o
-obj-$(CONFIG_XEN_DOM0)		+= pci.o
+obj-$(CONFIG_XEN_PLATFORM_PCI)		+= xen-platform-pci.o
+obj-$(CONFIG_SWIOTLB_XEN)		+= swiotlb-xen.o
+obj-$(CONFIG_XEN_DOM0)			+= pci.o
 
-xen-evtchn-y			:= evtchn.o
+xen-evtchn-y				:= evtchn.o
 xen-gntdev-y				:= gntdev.o
 xen-gntalloc-y				:= gntalloc.o
 
-xen-platform-pci-y		:= platform-pci.o
+xen-platform-pci-y			:= platform-pci.o
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 043af8ad6b6..f54290baa3d 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -114,7 +114,6 @@ static void __balloon_append(struct page *page)
 	if (PageHighMem(page)) {
 		list_add_tail(&page->lru, &ballooned_pages);
 		balloon_stats.balloon_high++;
-		dec_totalhigh_pages();
 	} else {
 		list_add(&page->lru, &ballooned_pages);
 		balloon_stats.balloon_low++;
@@ -124,6 +123,8 @@ static void __balloon_append(struct page *page)
 static void balloon_append(struct page *page)
 {
 	__balloon_append(page);
+	if (PageHighMem(page))
+		dec_totalhigh_pages();
 	totalram_pages--;
 }
 
@@ -193,7 +194,7 @@ static enum bp_state update_schedule(enum bp_state state)
 	return BP_EAGAIN;
 }
 
-static unsigned long current_target(void)
+static long current_credit(void)
 {
 	unsigned long target = balloon_stats.target_pages;
 
@@ -202,7 +203,7 @@ static unsigned long current_target(void)
 		     balloon_stats.balloon_low +
 		     balloon_stats.balloon_high);
 
-	return target;
+	return target - balloon_stats.current_pages;
 }
 
 static enum bp_state increase_reservation(unsigned long nr_pages)
@@ -246,7 +247,7 @@ static enum bp_state increase_reservation(unsigned long nr_pages)
 		set_phys_to_machine(pfn, frame_list[i]);
 
 		/* Link back into the page tables if not highmem. */
-		if (!xen_hvm_domain() && pfn < max_low_pfn) {
+		if (xen_pv_domain() && !PageHighMem(page)) {
 			int ret;
 			ret = HYPERVISOR_update_va_mapping(
 				(unsigned long)__va(pfn << PAGE_SHIFT),
@@ -293,7 +294,7 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp)
 
 		scrub_page(page);
 
-		if (!xen_hvm_domain() && !PageHighMem(page)) {
+		if (xen_pv_domain() && !PageHighMem(page)) {
 			ret = HYPERVISOR_update_va_mapping(
 				(unsigned long)__va(pfn << PAGE_SHIFT),
 				__pte_ma(0), 0);
@@ -337,7 +338,7 @@ static void balloon_process(struct work_struct *work)
 	mutex_lock(&balloon_mutex);
 
 	do {
-		credit = current_target() - balloon_stats.current_pages;
+		credit = current_credit();
 
 		if (credit > 0)
 			state = increase_reservation(credit);
@@ -420,7 +421,7 @@ void free_xenballooned_pages(int nr_pages, struct page** pages)
 	}
 
 	/* The balloon may be too large now. Shrink it if needed. */
-	if (current_target() != balloon_stats.current_pages)
+	if (current_credit())
 		schedule_delayed_work(&balloon_worker, 0);
 
 	mutex_unlock(&balloon_mutex);
@@ -429,7 +430,7 @@ EXPORT_SYMBOL(free_xenballooned_pages);
 
 static int __init balloon_init(void)
 {
- 	unsigned long pfn, nr_pages, extra_pfn_end;
+	unsigned long pfn, extra_pfn_end;
 	struct page *page;
 
 	if (!xen_domain())
@@ -437,11 +438,7 @@ static int __init balloon_init(void)
 
 	pr_info("xen/balloon: Initialising balloon driver.\n");
 
- 	if (xen_pv_domain())
- 		nr_pages = xen_start_info->nr_pages;
- 	else
- 		nr_pages = max_pfn;
- 	balloon_stats.current_pages = min(nr_pages, max_pfn);
+	balloon_stats.current_pages = xen_pv_domain() ? min(xen_start_info->nr_pages, max_pfn) : max_pfn;
 	balloon_stats.target_pages  = balloon_stats.current_pages;
 	balloon_stats.balloon_low   = 0;
 	balloon_stats.balloon_high  = 0;
@@ -466,7 +463,7 @@ static int __init balloon_init(void)
 	     pfn < extra_pfn_end;
 	     pfn++) {
 		page = pfn_to_page(pfn);
-		/* totalram_pages doesn't include the boot-time
+		/* totalram_pages and totalhigh_pages do not include the boot-time
 		   balloon extension, so don't subtract from it. */
 		__balloon_append(page);
 	}
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 036343ba204..3ff822b4814 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -5,7 +5,7 @@
  * domain gets 1024 event channels, but NR_IRQ is not that large, we
  * must dynamically map irqs<->event channels.  The event channels
  * interface with the rest of the kernel by defining a xen interrupt
- * chip.  When an event is recieved, it is mapped to an irq and sent
+ * chip.  When an event is received, it is mapped to an irq and sent
  * through the normal interrupt processing path.
  *
  * There are four kinds of events which can be mapped to an event
@@ -101,6 +101,7 @@ struct irq_info
 			unsigned short gsi;
 			unsigned char vector;
 			unsigned char flags;
+			uint16_t domid;
 		} pirq;
 	} u;
 };
@@ -118,6 +119,8 @@ static DEFINE_PER_CPU(unsigned long [NR_EVENT_CHANNELS/BITS_PER_LONG],
 static struct irq_chip xen_dynamic_chip;
 static struct irq_chip xen_percpu_chip;
 static struct irq_chip xen_pirq_chip;
+static void enable_dynirq(struct irq_data *data);
+static void disable_dynirq(struct irq_data *data);
 
 /* Get info for IRQ */
 static struct irq_info *info_for_irq(unsigned irq)
@@ -184,6 +187,7 @@ static void xen_irq_info_pirq_init(unsigned irq,
 				   unsigned short pirq,
 				   unsigned short gsi,
 				   unsigned short vector,
+				   uint16_t domid,
 				   unsigned char flags)
 {
 	struct irq_info *info = info_for_irq(irq);
@@ -193,6 +197,7 @@ static void xen_irq_info_pirq_init(unsigned irq,
 	info->u.pirq.pirq = pirq;
 	info->u.pirq.gsi = gsi;
 	info->u.pirq.vector = vector;
+	info->u.pirq.domid = domid;
 	info->u.pirq.flags = flags;
 }
 
@@ -416,7 +421,7 @@ static int __must_check xen_allocate_irq_dynamic(void)
 #ifdef CONFIG_X86_IO_APIC
 	/*
 	 * For an HVM guest or domain 0 which see "real" (emulated or
-	 * actual repectively) GSIs we allocate dynamic IRQs
+	 * actual respectively) GSIs we allocate dynamic IRQs
 	 * e.g. those corresponding to event channels or MSIs
 	 * etc. from the range above those "real" GSIs to avoid
 	 * collisions.
@@ -473,16 +478,6 @@ static void xen_free_irq(unsigned irq)
 	irq_free_desc(irq);
 }
 
-static void pirq_unmask_notify(int irq)
-{
-	struct physdev_eoi eoi = { .irq = pirq_from_irq(irq) };
-
-	if (unlikely(pirq_needs_eoi(irq))) {
-		int rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi);
-		WARN_ON(rc);
-	}
-}
-
 static void pirq_query_unmask(int irq)
 {
 	struct physdev_irq_status_query irq_status;
@@ -506,6 +501,29 @@ static bool probing_irq(int irq)
 	return desc && desc->action == NULL;
 }
 
+static void eoi_pirq(struct irq_data *data)
+{
+	int evtchn = evtchn_from_irq(data->irq);
+	struct physdev_eoi eoi = { .irq = pirq_from_irq(data->irq) };
+	int rc = 0;
+
+	irq_move_irq(data);
+
+	if (VALID_EVTCHN(evtchn))
+		clear_evtchn(evtchn);
+
+	if (pirq_needs_eoi(data->irq)) {
+		rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi);
+		WARN_ON(rc);
+	}
+}
+
+static void mask_ack_pirq(struct irq_data *data)
+{
+	disable_dynirq(data);
+	eoi_pirq(data);
+}
+
 static unsigned int __startup_pirq(unsigned int irq)
 {
 	struct evtchn_bind_pirq bind_pirq;
@@ -539,7 +557,7 @@ static unsigned int __startup_pirq(unsigned int irq)
 
 out:
 	unmask_evtchn(evtchn);
-	pirq_unmask_notify(irq);
+	eoi_pirq(irq_get_irq_data(irq));
 
 	return 0;
 }
@@ -579,18 +597,7 @@ static void enable_pirq(struct irq_data *data)
 
 static void disable_pirq(struct irq_data *data)
 {
-}
-
-static void ack_pirq(struct irq_data *data)
-{
-	int evtchn = evtchn_from_irq(data->irq);
-
-	irq_move_irq(data);
-
-	if (VALID_EVTCHN(evtchn)) {
-		mask_evtchn(evtchn);
-		clear_evtchn(evtchn);
-	}
+	disable_dynirq(data);
 }
 
 static int find_irq_by_gsi(unsigned gsi)
@@ -639,9 +646,6 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi,
 	if (irq < 0)
 		goto out;
 
-	irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_level_irq,
-				      name);
-
 	irq_op.irq = irq;
 	irq_op.vector = 0;
 
@@ -655,9 +659,35 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi,
 		goto out;
 	}
 
-	xen_irq_info_pirq_init(irq, 0, pirq, gsi, irq_op.vector,
+	xen_irq_info_pirq_init(irq, 0, pirq, gsi, irq_op.vector, DOMID_SELF,
 			       shareable ? PIRQ_SHAREABLE : 0);
 
+	pirq_query_unmask(irq);
+	/* We try to use the handler with the appropriate semantic for the
+	 * type of interrupt: if the interrupt doesn't need an eoi
+	 * (pirq_needs_eoi returns false), we treat it like an edge
+	 * triggered interrupt so we use handle_edge_irq.
+	 * As a matter of fact this only happens when the corresponding
+	 * physical interrupt is edge triggered or an msi.
+	 *
+	 * On the other hand if the interrupt needs an eoi (pirq_needs_eoi
+	 * returns true) we treat it like a level triggered interrupt so we
+	 * use handle_fasteoi_irq like the native code does for this kind of
+	 * interrupts.
+	 * Depending on the Xen version, pirq_needs_eoi might return true
+	 * not only for level triggered interrupts but for edge triggered
+	 * interrupts too. In any case Xen always honors the eoi mechanism,
+	 * not injecting any more pirqs of the same kind if the first one
+	 * hasn't received an eoi yet. Therefore using the fasteoi handler
+	 * is the right choice either way.
+	 */
+	if (pirq_needs_eoi(irq))
+		irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
+				handle_fasteoi_irq, name);
+	else
+		irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
+				handle_edge_irq, name);
+
 out:
 	spin_unlock(&irq_mapping_update_lock);
 
@@ -680,7 +710,8 @@ int xen_allocate_pirq_msi(struct pci_dev *dev, struct msi_desc *msidesc)
 }
 
 int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
-			     int pirq, int vector, const char *name)
+			     int pirq, int vector, const char *name,
+			     domid_t domid)
 {
 	int irq, ret;
 
@@ -690,10 +721,10 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	if (irq == -1)
 		goto out;
 
-	irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_level_irq,
-				      name);
+	irq_set_chip_and_handler_name(irq, &xen_pirq_chip, handle_edge_irq,
+			name);
 
-	xen_irq_info_pirq_init(irq, 0, pirq, 0, vector, 0);
+	xen_irq_info_pirq_init(irq, 0, pirq, 0, vector, domid, 0);
 	ret = irq_set_msi_desc(irq, msidesc);
 	if (ret < 0)
 		goto error_irq;
@@ -722,9 +753,16 @@ int xen_destroy_irq(int irq)
 
 	if (xen_initial_domain()) {
 		unmap_irq.pirq = info->u.pirq.pirq;
-		unmap_irq.domid = DOMID_SELF;
+		unmap_irq.domid = info->u.pirq.domid;
 		rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq);
-		if (rc) {
+		/* If another domain quits without making the pci_disable_msix
+		 * call, the Xen hypervisor takes care of freeing the PIRQs
+		 * (free_domain_pirqs).
+		 */
+		if ((rc == -ESRCH && info->u.pirq.domid != DOMID_SELF))
+			printk(KERN_INFO "domain %d does not have %d anymore\n",
+				info->u.pirq.domid, info->u.pirq.pirq);
+		else if (rc) {
 			printk(KERN_WARNING "unmap irq failed %d\n", rc);
 			goto out;
 		}
@@ -759,6 +797,12 @@ out:
 	return irq;
 }
 
+
+int xen_pirq_from_irq(unsigned irq)
+{
+	return pirq_from_irq(irq);
+}
+EXPORT_SYMBOL_GPL(xen_pirq_from_irq);
 int bind_evtchn_to_irq(unsigned int evtchn)
 {
 	int irq;
@@ -773,7 +817,7 @@ int bind_evtchn_to_irq(unsigned int evtchn)
 			goto out;
 
 		irq_set_chip_and_handler_name(irq, &xen_dynamic_chip,
-					      handle_fasteoi_irq, "event");
+					      handle_edge_irq, "event");
 
 		xen_irq_info_evtchn_init(irq, evtchn);
 	}
@@ -912,8 +956,7 @@ int bind_evtchn_to_irqhandler(unsigned int evtchn,
 			      unsigned long irqflags,
 			      const char *devname, void *dev_id)
 {
-	unsigned int irq;
-	int retval;
+	int irq, retval;
 
 	irq = bind_evtchn_to_irq(evtchn);
 	if (irq < 0)
@@ -955,8 +998,7 @@ int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu,
 			    irq_handler_t handler,
 			    unsigned long irqflags, const char *devname, void *dev_id)
 {
-	unsigned int irq;
-	int retval;
+	int irq, retval;
 
 	irq = bind_virq_to_irq(virq, cpu);
 	if (irq < 0)
@@ -1181,9 +1223,6 @@ static void __xen_evtchn_do_upcall(void)
 				port = (word_idx * BITS_PER_LONG) + bit_idx;
 				irq = evtchn_to_irq[port];
 
-				mask_evtchn(port);
-				clear_evtchn(port);
-
 				if (irq != -1) {
 					desc = irq_to_desc(irq);
 					if (desc)
@@ -1339,10 +1378,16 @@ static void ack_dynirq(struct irq_data *data)
 {
 	int evtchn = evtchn_from_irq(data->irq);
 
-	irq_move_masked_irq(data);
+	irq_move_irq(data);
 
 	if (VALID_EVTCHN(evtchn))
-		unmask_evtchn(evtchn);
+		clear_evtchn(evtchn);
+}
+
+static void mask_ack_dynirq(struct irq_data *data)
+{
+	disable_dynirq(data);
+	ack_dynirq(data);
 }
 
 static int retrigger_dynirq(struct irq_data *data)
@@ -1504,6 +1549,18 @@ void xen_poll_irq(int irq)
 	xen_poll_irq_timeout(irq, 0 /* no timeout */);
 }
 
+/* Check whether the IRQ line is shared with other guests. */
+int xen_test_irq_shared(int irq)
+{
+	struct irq_info *info = info_for_irq(irq);
+	struct physdev_irq_status_query irq_status = { .irq = info->u.pirq.pirq };
+
+	if (HYPERVISOR_physdev_op(PHYSDEVOP_irq_status_query, &irq_status))
+		return 0;
+	return !(irq_status.flags & XENIRQSTAT_shared);
+}
+EXPORT_SYMBOL_GPL(xen_test_irq_shared);
+
 void xen_irq_resume(void)
 {
 	unsigned int cpu, evtchn;
@@ -1537,7 +1594,9 @@ static struct irq_chip xen_dynamic_chip __read_mostly = {
 	.irq_mask		= disable_dynirq,
 	.irq_unmask		= enable_dynirq,
 
-	.irq_eoi		= ack_dynirq,
+	.irq_ack		= ack_dynirq,
+	.irq_mask_ack		= mask_ack_dynirq,
+
 	.irq_set_affinity	= set_affinity_irq,
 	.irq_retrigger		= retrigger_dynirq,
 };
@@ -1547,14 +1606,15 @@ static struct irq_chip xen_pirq_chip __read_mostly = {
 
 	.irq_startup		= startup_pirq,
 	.irq_shutdown		= shutdown_pirq,
-
 	.irq_enable		= enable_pirq,
-	.irq_unmask		= enable_pirq,
-
 	.irq_disable		= disable_pirq,
-	.irq_mask		= disable_pirq,
 
-	.irq_ack		= ack_pirq,
+	.irq_mask		= disable_dynirq,
+	.irq_unmask		= enable_dynirq,
+
+	.irq_ack		= eoi_pirq,
+	.irq_eoi		= eoi_pirq,
+	.irq_mask_ack		= mask_ack_pirq,
 
 	.irq_set_affinity	= set_affinity_irq,
 
diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c
index a7ffdfe19fc..f6832f46aea 100644
--- a/drivers/xen/gntalloc.c
+++ b/drivers/xen/gntalloc.c
@@ -427,6 +427,17 @@ static long gntalloc_ioctl(struct file *filp, unsigned int cmd,
 	return 0;
 }
 
+static void gntalloc_vma_open(struct vm_area_struct *vma)
+{
+	struct gntalloc_gref *gref = vma->vm_private_data;
+	if (!gref)
+		return;
+
+	spin_lock(&gref_lock);
+	gref->users++;
+	spin_unlock(&gref_lock);
+}
+
 static void gntalloc_vma_close(struct vm_area_struct *vma)
 {
 	struct gntalloc_gref *gref = vma->vm_private_data;
@@ -441,6 +452,7 @@ static void gntalloc_vma_close(struct vm_area_struct *vma)
 }
 
 static struct vm_operations_struct gntalloc_vmops = {
+	.open = gntalloc_vma_open,
 	.close = gntalloc_vma_close,
 };
 
@@ -471,8 +483,6 @@ static int gntalloc_mmap(struct file *filp, struct vm_area_struct *vma)
 	vma->vm_private_data = gref;
 
 	vma->vm_flags |= VM_RESERVED;
-	vma->vm_flags |= VM_DONTCOPY;
-	vma->vm_flags |= VM_PFNMAP | VM_PFN_AT_MMAP;
 
 	vma->vm_ops = &gntalloc_vmops;
 
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index b0f9e8fb005..f914b26cf0c 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -330,17 +330,26 @@ static int unmap_grant_pages(struct grant_map *map, int offset, int pages)
 
 /* ------------------------------------------------------------------ */
 
+static void gntdev_vma_open(struct vm_area_struct *vma)
+{
+	struct grant_map *map = vma->vm_private_data;
+
+	pr_debug("gntdev_vma_open %p\n", vma);
+	atomic_inc(&map->users);
+}
+
 static void gntdev_vma_close(struct vm_area_struct *vma)
 {
 	struct grant_map *map = vma->vm_private_data;
 
-	pr_debug("close %p\n", vma);
+	pr_debug("gntdev_vma_close %p\n", vma);
 	map->vma = NULL;
 	vma->vm_private_data = NULL;
 	gntdev_put_map(map);
 }
 
 static struct vm_operations_struct gntdev_vmops = {
+	.open = gntdev_vma_open,
 	.close = gntdev_vma_close,
 };
 
@@ -652,7 +661,10 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma)
 
 	vma->vm_ops = &gntdev_vmops;
 
-	vma->vm_flags |= VM_RESERVED|VM_DONTCOPY|VM_DONTEXPAND|VM_PFNMAP;
+	vma->vm_flags |= VM_RESERVED|VM_DONTEXPAND;
+
+	if (use_ptemod)
+		vma->vm_flags |= VM_DONTCOPY|VM_PFNMAP;
 
 	vma->vm_private_data = map;
 
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 3745a318def..fd725cde6ad 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -466,13 +466,30 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
 		if (map_ops[i].status)
 			continue;
 
-		/* m2p override only supported for GNTMAP_contains_pte mappings */
-		if (!(map_ops[i].flags & GNTMAP_contains_pte))
-			continue;
-		pte = (pte_t *) (mfn_to_virt(PFN_DOWN(map_ops[i].host_addr)) +
+		if (map_ops[i].flags & GNTMAP_contains_pte) {
+			pte = (pte_t *) (mfn_to_virt(PFN_DOWN(map_ops[i].host_addr)) +
 				(map_ops[i].host_addr & ~PAGE_MASK));
-		mfn = pte_mfn(*pte);
-		ret = m2p_add_override(mfn, pages[i]);
+			mfn = pte_mfn(*pte);
+		} else {
+			/* If you really wanted to do this:
+			 * mfn = PFN_DOWN(map_ops[i].dev_bus_addr);
+			 *
+			 * The reason we do not implement it is b/c on the
+			 * unmap path (gnttab_unmap_refs) we have no means of
+			 * checking whether the page is !GNTMAP_contains_pte.
+			 *
+			 * That is without some extra data-structure to carry
+			 * the struct page, bool clear_pte, and list_head next
+			 * tuples and deal with allocation/delallocation, etc.
+			 *
+			 * The users of this API set the GNTMAP_contains_pte
+			 * flag so lets just return not supported until it
+			 * becomes neccessary to implement.
+			 */
+			return -EOPNOTSUPP;
+		}
+		ret = m2p_add_override(mfn, pages[i],
+				       map_ops[i].flags & GNTMAP_contains_pte);
 		if (ret)
 			return ret;
 	}
@@ -494,7 +511,7 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
 		return ret;
 
 	for (i = 0; i < count; i++) {
-		ret = m2p_remove_override(pages[i]);
+		ret = m2p_remove_override(pages[i], true /* clear the PTE */);
 		if (ret)
 			return ret;
 	}
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 95143dd6904..0b5366b5be2 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -8,6 +8,7 @@
 #include <linux/sysrq.h>
 #include <linux/stop_machine.h>
 #include <linux/freezer.h>
+#include <linux/syscore_ops.h>
 
 #include <xen/xen.h>
 #include <xen/xenbus.h>
@@ -61,7 +62,7 @@ static void xen_post_suspend(int cancelled)
 	xen_mm_unpin_all();
 }
 
-#ifdef CONFIG_HIBERNATION
+#ifdef CONFIG_HIBERNATE_CALLBACKS
 static int xen_suspend(void *data)
 {
 	struct suspend_info *si = data;
@@ -69,9 +70,9 @@ static int xen_suspend(void *data)
 
 	BUG_ON(!irqs_disabled());
 
-	err = sysdev_suspend(PMSG_FREEZE);
+	err = syscore_suspend();
 	if (err) {
-		printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
+		printk(KERN_ERR "xen_suspend: system core suspend failed: %d\n",
 			err);
 		return err;
 	}
@@ -95,7 +96,7 @@ static int xen_suspend(void *data)
 		xen_timer_resume();
 	}
 
-	sysdev_resume();
+	syscore_resume();
 
 	return 0;
 }
@@ -173,7 +174,7 @@ out:
 #endif
 	shutting_down = SHUTDOWN_INVALID;
 }
-#endif	/* CONFIG_HIBERNATION */
+#endif	/* CONFIG_HIBERNATE_CALLBACKS */
 
 struct shutdown_handler {
 	const char *command;
@@ -202,7 +203,7 @@ static void shutdown_handler(struct xenbus_watch *watch,
 		{ "poweroff",	do_poweroff },
 		{ "halt",	do_poweroff },
 		{ "reboot",	do_reboot   },
-#ifdef CONFIG_HIBERNATION
+#ifdef CONFIG_HIBERNATE_CALLBACKS
 		{ "suspend",	do_suspend  },
 #endif
 		{NULL, NULL},
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
index 60f1827a32c..1e0fe01eb67 100644
--- a/drivers/xen/sys-hypervisor.c
+++ b/drivers/xen/sys-hypervisor.c
@@ -215,7 +215,7 @@ static struct attribute_group xen_compilation_group = {
 	.attrs = xen_compile_attrs,
 };
 
-int __init static xen_compilation_init(void)
+static int __init xen_compilation_init(void)
 {
 	return sysfs_create_group(hypervisor_kobj, &xen_compilation_group);
 }
diff --git a/firmware/Makefile b/firmware/Makefile
index 0384afa93de..0d15a3d113a 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,9 +32,9 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
-fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.5.0.fw \
-			      bnx2x/bnx2x-e1h-6.2.5.0.fw \
-			      bnx2x/bnx2x-e2-6.2.5.0.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.9.0.fw \
+			      bnx2x/bnx2x-e1h-6.2.9.0.fw \
+			      bnx2x/bnx2x-e2-6.2.9.0.fw
 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \
 			     bnx2/bnx2-rv2p-09-6.0.17.fw \
 			     bnx2/bnx2-rv2p-09ax-6.0.17.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 76404f9ce74..182ecb6c275 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -679,14 +679,15 @@ Found in hex form in kernel source.
 
 Driver: bnx2x: Broadcom Everest
 
-File: bnx2x/bnx2x-e1-5.2.13.0.fw
-File: bnx2x/bnx2x-e1h-5.2.13.0.fw
+File: bnx2x/bnx2x-e1-6.2.9.0.fw
+File: bnx2x/bnx2x-e1h-6.2.9.0.fw
+File: bnx2x/bnx2x-e2-6.2.9.0.fw
 
 License:
-  Copyright (c) 2007-2010 Broadcom Corporation
+  Copyright (c) 2007-2011 Broadcom Corporation
 
   This file contains firmware data derived from proprietary unpublished
-  source code, Copyright (c) 2007-2009 Broadcom Corporation.
+  source code, Copyright (c) 2007-2011 Broadcom Corporation.
 
   Permission is hereby granted for the distribution of this firmware data
   in hexadecimal or equivalent format, provided this copyright notice is
diff --git a/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex
deleted file mode 100644
index 1b535827a74..00000000000
--- a/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex
+++ /dev/null
@@ -1,9483 +0,0 @@
-:1000000000003BB0000000680000070C00003C202E
-:1000100000001AF8000043300000007C00005E3051
-:1000200000007A2C00005EB0000000B00000D8E0B4
-:10003000000080200000D99800000088000159C00D
-:100040000000398800015A5000000090000193E040
-:100050000000ABFC0001947800000FFC0002407827
-:100060000000000400025078020400480000000F65
-:100070000204005400000045020400580000000083
-:100080000204005C0000000602040070000000048E
-:1000900002040078000000000204007C1217000037
-:1000A00002040080221700000204008432170000BE
-:1000B00006040088000000050204009C12150000E0
-:1000C000020400A022150000020400A43215000062
-:1000D000060400A800000004020400B8021000009A
-:1000E000020400BC00100000020400C01010000058
-:1000F000020400C420100000020400C830100000F8
-:10010000060400CC00000004020400DC0010000023
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000060400EC00000004A1
-:100130000104012400000000010401280000000067
-:100140000104012C00000000010401300000000047
-:1001500002040004000000FF02040008000000FF89
-:100160000204000C000000FF02040010000000FF69
-:1001700002040014000000FF02040018000000FF49
-:100180000204001C000000FF02040020000000FF29
-:10019000020400240000003E0204002800000000C9
-:1001A0000204002C0000003F020400300000003F69
-:1001B000020400340000003F020400380000000088
-:1001C0000204003C0000003F020400400000003F29
-:1001D000020400440000003F020420080000021155
-:1001E0000204200C0000020002042010000002049F
-:1001F00002042014000002190204201C0000FFFF6A
-:10020000020420200000FFFF020420240000FFFF62
-:10021000020420280000FFFF0604203800000080B0
-:100220000204223807FFFFFF0204223C0000003FC7
-:100230000204224007FFFFFF020422440000000FD7
-:1002400001042248000000000104224C00000000CC
-:1002500001042250000000000104225400000000AC
-:1002600001042258000000000104225C000000008C
-:10027000010422600000000001042264000000006C
-:1002800001042268000000000104226C000000004C
-:10029000010422700000000001042274000000002C
-:1002A00001042278000000000104227C000000000C
-:1002B000020424BC000000010C042000000003E83C
-:1002C0000A042000000000010B0420000000000AC6
-:1002D0000605400000000D0002050044000000205B
-:1002E00002050048000000320205009002150020BF
-:1002F000020500940215002002050098000000305D
-:100300000205009C08100000020500A00000003358
-:10031000020500A400000030020500A80000003122
-:10032000020500AC00000002020500B0000000055C
-:10033000020500B400000006020500B8000000023B
-:10034000020500BC00000002020500C00000000021
-:10035000020500C400000005020500C800000002FC
-:10036000020500CC00000002020500D000000002DF
-:10037000020500D400000001020501140000000184
-:100380000205011C0000000102050120000000021E
-:1003900002050204000000010205020C00000040FA
-:1003A00002050210000000400205021C00000020AF
-:1003B00002050220000000130205022400000020B4
-:1003C000060502400000000A04050280002000002B
-:1003D000020500500000000702050054000000075D
-:1003E00002050058000000000205005C0000000843
-:1003F0000605006000000004020500D800000006A9
-:10040000020500E00000000D020500E40000002DE0
-:10041000020500E800000000020500EC00000020DA
-:10042000020500F000000000020500F400000020BA
-:10043000020500F800000000020500FC000000209A
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C0000406100002000020020600DC000000010B
-:1004D000010600D80000000004060200000302200C
-:1004E000020600DC0000000002060068000000B800
-:1004F0000206007800000114010600B800000000A8
-:10050000010600C8000000000206006C000000B8F0
-:100510000206007C00000114010600BC000000007F
-:10052000010600CC0000000007180400007B00005A
-:100530000818076000140223071C00002A040000AA
-:10054000071C800032110A82071D00001E0C1707CD
-:10055000081D4550575602250118000000000000F4
-:10056000011800040000000001180008000000004D
-:100570000118000C0000000001180010000000002D
-:100580000118001400000000021800200000000103
-:1005900002180024000000020218002800000003D6
-:1005A0000218002C000000000218003000000004B7
-:1005B000021800340000000102180038000000009A
-:1005C0000218003C00000001021800400000000476
-:1005D000021800440000000002180048000000015A
-:1005E0000218004C00000003021800500000000038
-:1005F0000218005400000001021800580000000416
-:100600000218005C000000000218006000000001F9
-:1006100002180064000000030218006800000000D7
-:100620000218006C000000010218007000000004B5
-:100630000218007400000000021800780000000496
-:100640000218007C00000003061800800000000271
-:10065000021800A400003FFF021800A8000003FFDA
-:1006600002180224000000000218023400000000FA
-:100670000218024C00000000021802E4000000FF13
-:100680000618100000000400021B8BC000000001CF
-:10069000021B800000000034021B80400000001894
-:1006A000021B80800000000C021B80C000000020A4
-:1006B0000C1B83000007A1200A1B830000000138E7
-:1006C0000B1B8300000013880A1B834000000000FE
-:1006D0000C1B8340000001F40B1B8340000000054D
-:1006E000021B83800007A120021B83C0000001F4CD
-:1006F000061A100000000273041A19CC0001022728
-:10070000061A2008000000C8061A20000000000297
-:10071000041A499800040228061A2E280000000234
-:10072000061A2E2000000002061A0800000000022F
-:10073000061A080800000004061A08180000000243
-:10074000041A08B00002022C061A2FD0000000067E
-:10075000041A2FE80002022E041A2FC000040230EF
-:10076000041A300000010234061A300400000003AD
-:10077000041A301000010235061A3014000000037C
-:10078000041A302000010236061A3024000000034B
-:10079000041A303000010237061A3034000000031A
-:1007A000041A304000010238061A304400000003E9
-:1007B000041A305000010239061A305400000003B8
-:1007C000041A30600001023A061A30640000000387
-:1007D000041A30700001023B061A30740000000356
-:1007E000041A30800001023C061A30840000000325
-:1007F000041A30900001023D061A309400000003F4
-:10080000041A30A00001023E061A30A400000003C2
-:10081000041A30B00001023F061A30B40000000391
-:10082000041A30C000010240061A30C40000000360
-:10083000041A30D000010241061A30D4000000032F
-:10084000041A30E000010242061A30E400000003FE
-:10085000041A30F000010243061A30F400000003CD
-:10086000041A310000010244061A3104000000039A
-:10087000041A311000010245061A31140000000369
-:10088000041A312000010246061A31240000000338
-:10089000041A313000010247061A31340000000307
-:1008A000041A314000010248061A314400000003D6
-:1008B000041A315000010249061A315400000003A5
-:1008C000041A31600001024A061A31640000000374
-:1008D000041A31700001024B061A31740000000343
-:1008E000041A31800001024C061A31840000000312
-:1008F000041A31900001024D061A319400000003E1
-:10090000041A31A00001024E061A31A400000003AF
-:10091000041A31B00001024F061A31B4000000037E
-:10092000041A31C000010250061A31C4000000034D
-:10093000041A31D000010251061A31D4000000031C
-:10094000041A31E000010252061A31E400000003EB
-:10095000041A31F000010253061A31F400000003BA
-:10096000041A320000010254061A32040000000387
-:10097000041A321000010255061A32140000000356
-:10098000041A322000010256061A32240000000325
-:10099000041A323000010257061A323400000003F4
-:1009A000041A324000010258061A324400000003C3
-:1009B000041A325000010259061A32540000000392
-:1009C000041A32600001025A061A32640000000361
-:1009D000041A32700001025B061A32740000000330
-:1009E000041A32800001025C061A328400000003FF
-:1009F000041A32900001025D061A329400000003CE
-:100A0000041A32A00001025E061A32A4000000039C
-:100A1000041A32B00001025F061A32B4000000036B
-:100A2000041A32C000010260061A32C4000000033A
-:100A3000041A32D000010261061A32D40000000309
-:100A4000041A32E000010262061A32E400000003D8
-:100A5000041A32F000010263061A32F400000003A7
-:100A6000041A330000010264061A33040000000374
-:100A7000041A331000010265061A33140000000343
-:100A8000041A332000010266061A33240000000312
-:100A9000041A333000010267061A333400000003E1
-:100AA000041A334000010268061A334400000003B0
-:100AB000041A335000010269061A3354000000037F
-:100AC000041A33600001026A061A3364000000034E
-:100AD000041A33700001026B061A3374000000031D
-:100AE000041A33800001026C061A338400000003EC
-:100AF000041A33900001026D061A339400000003BB
-:100B0000041A33A00001026E061A33A40000000389
-:100B1000041A33B00001026F061A33B40000000358
-:100B2000041A33C000010270061A33C40000000327
-:100B3000041A33D000010271061A33D400000003F6
-:100B4000041A33E000010272061A33E400000003C5
-:100B5000041A33F000010273061A33F40000000394
-:100B6000041A340000010274061A34040000000361
-:100B7000041A341000010275061A34140000000330
-:100B8000041A342000010276061A342400000003FF
-:100B9000041A343000010277061A343400000003CE
-:100BA000041A344000010278061A3444000000039D
-:100BB000041A345000010279061A3454000000036C
-:100BC000041A34600001027A061A3464000000033B
-:100BD000041A34700001027B061A3474000000030A
-:100BE000041A34800001027C061A348400000003D9
-:100BF000041A34900001027D061A349400000003A8
-:100C0000041A34A00001027E061A34A40000000376
-:100C1000041A34B00001027F061A34B40000000345
-:100C2000041A34C000010280061A34C40000000314
-:100C3000041A34D000010281061A34D400000003E3
-:100C4000041A34E000010282061A34E400000003B2
-:100C5000041A34F000010283061A34F40000000381
-:100C6000041A350000010284061A3504000000034E
-:100C7000041A351000010285061A3514000000031D
-:100C8000041A352000010286061A352400000003EC
-:100C9000041A353000010287061A353400000003BB
-:100CA000041A354000010288061A3544000000038A
-:100CB000041A355000010289061A35540000000359
-:100CC000041A35600001028A061A35640000000328
-:100CD000041A35700001028B061A357400000003F7
-:100CE000041A35800001028C061A358400000003C6
-:100CF000041A35900001028D061A35940000000395
-:100D0000041A35A00001028E061A35A40000000363
-:100D1000041A35B00001028F061A35B40000000332
-:100D2000041A35C000010290061A35C40000000301
-:100D3000041A35D000010291061A35D400000003D0
-:100D4000041A35E000010292061A35E4000000039F
-:100D5000041A35F000010293061A35F4000000036E
-:100D6000041A360000010294061A3604000000033B
-:100D7000041A361000010295061A3614000000030A
-:100D8000041A362000010296061A362400000003D9
-:100D9000041A363000010297061A363400000003A8
-:100DA000041A364000010298061A36440000000377
-:100DB000041A365000010299061A36540000000346
-:100DC000041A36600001029A061A36640000000315
-:100DD000041A36700001029B061A367400000003E4
-:100DE000041A36800001029C061A368400000003B3
-:100DF000041A36900001029D061A36940000000382
-:100E0000041A36A00001029E061A36A40000000350
-:100E1000041A36B00001029F061A36B4000000031F
-:100E2000041A36C0000102A0061A36C400000003EE
-:100E3000041A36D0000102A1061A36D400000003BD
-:100E4000041A36E0000102A2061A36E4000000038C
-:100E5000041A36F0000102A3061A36F4000000035B
-:100E6000041A3700000102A4061A37040000000328
-:100E7000041A3710000102A5061A371400000003F7
-:100E8000041A3720000102A6061A372400000003C6
-:100E9000041A3730000102A7061A37340000000395
-:100EA000041A3740000102A8061A37440000000364
-:100EB000041A3750000102A9061A37540000000333
-:100EC000041A3760000102AA061A37640000000302
-:100ED000041A3770000102AB061A377400000003D1
-:100EE000041A3780000102AC061A378400000003A0
-:100EF000041A3790000102AD061A3794000000036F
-:100F0000041A37A0000102AE061A37A4000000033D
-:100F1000041A37B0000102AF061A37B4000000030C
-:100F2000041A37C0000102B0061A37C400000003DB
-:100F3000041A37D0000102B1061A37D400000003AA
-:100F4000041A37E0000102B2061A37E40000000379
-:100F5000041A37F0000102B3061A37F40000000348
-:100F6000041A3800000102B4061A38040000000315
-:100F7000041A3810000102B5061A381400000003E4
-:100F8000041A3820000102B6061A382400000003B3
-:100F9000041A3830000102B7061A38340000000382
-:100FA000041A3840000102B8061A38440000000351
-:100FB000041A3850000102B9061A38540000000320
-:100FC000041A3860000102BA061A386400000003EF
-:100FD000041A3870000102BB061A387400000003BE
-:100FE000041A3880000102BC061A3884000000038D
-:100FF000041A3890000102BD061A3894000000035C
-:10100000041A38A0000102BE061A38A4000000032A
-:10101000041A38B0000102BF061A38B400000003F9
-:10102000041A38C0000102C0061A38C400000003C8
-:10103000041A38D0000102C1061A38D40000000397
-:10104000041A38E0000102C2061A38E40000000366
-:10105000041A38F0000102C3061A38F40000000335
-:10106000041A3900000102C4061A39040000000302
-:10107000041A3910000102C5061A391400000003D1
-:10108000041A3920000102C6061A392400000003A0
-:10109000041A3930000102C7061A3934000000036F
-:1010A000041A3940000102C8061A3944000000033E
-:1010B000041A3950000102C9061A3954000000030D
-:1010C000041A3960000102CA061A396400000003DC
-:1010D000041A3970000102CB061A397400000003AB
-:1010E000041A3980000102CC061A3984000000037A
-:1010F000041A3990000102CD061A39940000000349
-:10110000041A39A0000102CE061A39A40000000317
-:10111000041A39B0000102CF061A39B400000003E6
-:10112000041A39C0000102D0061A39C400000003B5
-:10113000041A39D0000102D1061A39D40000000384
-:10114000041A39E0000102D2061A39E40000000353
-:10115000041A39F0000102D3061A39F40000000322
-:10116000041A3A00000102D4061A3A0400000003EF
-:10117000041A3A10000102D5061A3A1400000003BE
-:10118000041A3A20000102D6061A3A24000000038D
-:10119000041A3A30000102D7061A3A34000000035C
-:1011A000041A3A40000102D8061A3A44000000032B
-:1011B000041A3A50000102D9061A3A5400000003FA
-:1011C000041A3A60000102DA061A3A6400000003C9
-:1011D000041A3A70000102DB061A3A740000000398
-:1011E000041A3A80000102DC061A3A840000000367
-:1011F000041A3A90000102DD061A3A940000000336
-:10120000041A3AA0000102DE061A3AA40000000304
-:10121000041A3AB0000102DF061A3AB400000003D3
-:10122000041A3AC0000102E0061A3AC400000003A2
-:10123000041A3AD0000102E1061A3AD40000000371
-:10124000041A3AE0000102E2061A3AE40000000340
-:10125000041A3AF0000102E3061A3AF4000000030F
-:10126000041A3B00000102E4061A3B0400000003DC
-:10127000041A3B10000102E5061A3B1400000003AB
-:10128000041A3B20000102E6061A3B24000000037A
-:10129000041A3B30000102E7061A3B340000000349
-:1012A000041A3B40000102E8061A3B440000000318
-:1012B000041A3B50000102E9061A3B5400000003E7
-:1012C000041A3B60000102EA061A3B6400000003B6
-:1012D000041A3B70000102EB061A3B740000000385
-:1012E000041A3B80000102EC061A3B840000000354
-:1012F000041A3B90000102ED061A3B940000000323
-:10130000041A3BA0000102EE061A3BA400000003F1
-:10131000041A3BB0000102EF061A3BB400000003C0
-:10132000041A3BC0000102F0061A3BC4000000038F
-:10133000041A3BD0000102F1061A3BD4000000035E
-:10134000041A3BE0000102F2061A3BE4000000032D
-:10135000041A3BF0000102F3061A3BF400000003FC
-:10136000041A3C00000102F4061A3C0400000003C9
-:10137000041A3C10000102F5061A3C140000000398
-:10138000041A3C20000102F6061A3C240000000367
-:10139000041A3C30000102F7061A3C340000000336
-:1013A000041A3C40000102F8061A3C440000000305
-:1013B000041A3C50000102F9061A3C5400000003D4
-:1013C000041A3C60000102FA061A3C6400000003A3
-:1013D000041A3C70000102FB061A3C740000000372
-:1013E000041A3C80000102FC061A3C840000000341
-:1013F000041A3C90000102FD061A3C940000000310
-:10140000041A3CA0000102FE061A3CA400000003DE
-:10141000041A3CB0000102FF061A3CB400000003AD
-:10142000041A3CC000010300061A3CC4000000037B
-:10143000041A3CD000010301061A3CD4000000034A
-:10144000041A3CE000010302061A3CE40000000319
-:10145000041A3CF000010303061A3CF400000003E8
-:10146000041A3D0000010304061A3D0400000003B5
-:10147000041A3D1000010305061A3D140000000384
-:10148000041A3D2000010306061A3D240000000353
-:10149000041A3D3000010307061A3D340000000322
-:1014A000041A3D4000010308061A3D4400000003F1
-:1014B000041A3D5000010309061A3D5400000003C0
-:1014C000041A3D600001030A061A3D64000000038F
-:1014D000041A3D700001030B061A3D74000000035E
-:1014E000041A3D800001030C061A3D84000000032D
-:1014F000041A3D900001030D061A3D9400000003FC
-:10150000041A3DA00001030E061A3DA400000003CA
-:10151000041A3DB00001030F061A3DB40000000399
-:10152000041A3DC000010310061A3DC40000000368
-:10153000041A3DD000010311061A3DD40000000337
-:10154000041A3DE000010312061A3DE40000000306
-:10155000041A3DF000010313061A3DF400000003D5
-:10156000041A3E0000010314061A3E0400000003A2
-:10157000041A3E1000010315061A3E140000000371
-:10158000041A3E2000010316061A3E240000000340
-:10159000041A3E3000010317061A3E34000000030F
-:1015A000041A3E4000010318061A3E4400000003DE
-:1015B000041A3E5000010319061A3E5400000003AD
-:1015C000041A3E600001031A061A3E64000000037C
-:1015D000041A3E700001031B061A3E74000000034B
-:1015E000041A3E800001031C061A3E84000000031A
-:1015F000041A3E900001031D061A3E9400000003E9
-:10160000041A3EA00001031E061A3EA400000003B7
-:10161000041A3EB00001031F061A3EB40000000386
-:10162000041A3EC000010320061A3EC40000000355
-:10163000041A3ED000010321061A3ED40000000324
-:10164000041A3EE000010322061A3EE400000003F3
-:10165000041A3EF000010323061A3EF400000003C2
-:10166000041A3F0000010324061A3F04000000038F
-:10167000041A3F1000010325061A3F14000000035E
-:10168000041A3F2000010326061A3F24000000032D
-:10169000041A3F3000010327061A3F3400000003FC
-:1016A000041A3F4000010328061A3F4400000003CB
-:1016B000041A3F5000010329061A3F54000000039A
-:1016C000041A3F600001032A061A3F640000000369
-:1016D000041A3F700001032B061A3F740000000338
-:1016E000041A3F800001032C061A3F840000000307
-:1016F000041A3F900001032D061A3F9400000003D6
-:10170000041A3FA00001032E061A3FA400000003A4
-:10171000041A3FB00001032F061A3FB40000000373
-:10172000041A3FC000010330061A3FC40000000342
-:10173000041A3FD000010331061A3FD40000000311
-:10174000041A3FE000010332061A3FE400000007DC
-:10175000041A4CB000080333061A400000000124AC
-:10176000021A492000000000061A2500000000109F
-:10177000061A258000000012061A09C00000004861
-:10178000061A080000000002061A082000000012D5
-:10179000041A2FB00002033B041A4CF00002033D70
-:1017A000061A500000000004061A449000000124AC
-:1017B000021A492400000000061A2540000000100B
-:1017C000061A25C800000012061A0AE000000048A8
-:1017D000061A081000000002061A0868000000122D
-:1017E000041A2FB80002033F041A4CF80002034108
-:1017F000061A5010000000040200A468000AFFDC72
-:101800000200A280000000010200A294071D29111D
-:101810000200A298000000000200A29C009C042488
-:101820000200A2A0000000000200A2A40000020921
-:101830000200A4FCFF000000020100B4000000014F
-:10184000020100B800000001020100DC00000001FC
-:10185000020101000000000102010104000000017A
-:101860000201007C0030000002010084000000281A
-:101870000201008C000000000201013000000004A1
-:101880000201025C000000010201032800000000C8
-:101890000201055400000030020100C400000001F4
-:1018A000020100CC00000001020100F8000000016C
-:1018B000020100F000000001020100800030000081
-:1018C00002010088000000280201009000000000D2
-:1018D0000201013400000004020102DC00000001EA
-:1018E0000201032C0000000002010564000000302A
-:1018F000020100C800000001020100D00000000148
-:10190000020100FC00000001020100F400000001DF
-:10191000020C100000000028020C200800000A1130
-:10192000020C200C00000A00020C201000000A0427
-:10193000020C201C0000FFFF020C20200000FFFF13
-:10194000020C20240000FFFF020C20280000FFFFF3
-:10195000020C203800000020020C203C0000002176
-:10196000020C204000000022020C20440000002352
-:10197000020C204800000024020C204C000000252E
-:10198000020C205000000026020C2054000000270A
-:10199000020C205800000028020C205C00000029E6
-:1019A000020C20600000002A020C20640000002BC2
-:1019B000020C20680000002C020C206C0000002D9E
-:1019C000020C20700000002E020C20740000002F7A
-:1019D000020C207800000010060C207C0000004F54
-:1019E000020C21B800000001020C21BC0000000123
-:1019F000020C21C000000001020C21C40000000103
-:101A0000020C21C800000001020C21CC00000001E2
-:101A1000020C21D000000001020C21D400000001C2
-:101A2000020C21D800000001020C21DC00000001A2
-:101A3000020C21E000000001020C21E40000000182
-:101A4000020C21E800000001020C21EC0000000162
-:101A5000020C21F000000001020C21F40000000142
-:101A6000020C21F800000001060C21FC0000000F10
-:101A7000020C223807FFFFFF020C223C0000003F4F
-:101A8000020C224007FFFFFF020C22440000000F5F
-:101A9000010C224800000000010C224C0000000054
-:101AA000010C225000000000010C22540000000034
-:101AB000010C225800000000010C225C0000000014
-:101AC000010C226000000000010C226400000000F4
-:101AD000010C226800000000010C226C00000000D4
-:101AE000010C227000000000010C227400000000B4
-:101AF000010C227800000000010C227C0000000094
-:101B0000020C24BC000000010C0C2000000003E8C3
-:101B10000A0C2000000000010B0C20000000000A4D
-:101B2000020C400800000562020C400C0000055148
-:101B3000020C401000000555020C40140000057214
-:101B4000020C401C0000FFFF020C40200000FFFFC1
-:101B5000020C40240000FFFF020C40280000FFFFA1
-:101B6000020C403800000046020C403C0000000C13
-:101B7000060C40400000005E020C41B8000000016D
-:101B8000060C41BC0000001F020C423807FFFFFF9B
-:101B9000020C423C0000003F020C424007FFFFFFE6
-:101BA000020C42440000000F010C424800000000FB
-:101BB000010C424C00000000010C425000000000EB
-:101BC000010C425400000000010C425800000000CB
-:101BD000010C425C00000000010C426000000000AB
-:101BE000010C426400000000010C4268000000008B
-:101BF000010C426C00000000010C4270000000006B
-:101C0000010C427400000000010C4278000000004A
-:101C1000010C427C00000000010C4280000000002A
-:101C2000020C44C0000000010C0C4000000003E85E
-:101C30000A0C4000000000010B0C40000000000AEC
-:101C4000060D400000000A00020D004400000032B2
-:101C5000020D008C02150020020D009002150020DC
-:101C6000020D009408100000020D009800000033DF
-:101C7000020D009C00000002020D00A00000000008
-:101C8000020D00A400000005020D00A800000005E0
-:101C9000060D00AC00000002020D00B400000002BE
-:101CA000020D00B800000003020D00BC000000029D
-:101CB000020D00C000000001020D00C8000000027B
-:101CC000020D00CC00000002020D015C00000001CA
-:101CD000020D016400000001020D01680000000215
-:101CE000020D020400000001020D020C00000020A1
-:101CF000020D021000000040020D0214000000401E
-:101D0000020D022000000003020D02240000001852
-:101D1000060D028000000012040D030000180343AA
-:101D2000060D03600000000C020D004C00000001D5
-:101D3000020D005000000002020D005400000000DF
-:101D4000020D005800000008060D005C00000004B1
-:101D5000020D00C400000004020D0114000000097F
-:101D6000020D011800000029020D011C0000000AEC
-:101D7000020D01200000002A020D012400000000D5
-:101D8000020D012800000020020D012C00000000BF
-:101D9000020D013000000020020D0134000000009F
-:101DA000020D013800000020020D013C000000007F
-:101DB000020D014000000020020D0144000000005F
-:101DC000020D014800000020020D00040000000187
-:101DD000020D000800000001020D000C00000001CF
-:101DE000020D001000000001020D001400000001AF
-:101DF000020D001800000001020D001C000000018F
-:101E0000020D002000000001020D0024000000016E
-:101E1000020D002800000001020D002C000000014E
-:101E2000020D003000000001020D0034000000012E
-:101E3000020D003800000001020D003C000000010E
-:101E4000060E200000000800020E004C00000032C8
-:101E5000020E009402150020020E009802150020C8
-:101E6000020E009C00000030020E00A008100000CE
-:101E7000020E00A400000033020E00A80000003093
-:101E8000020E00AC00000031020E00B000000002A3
-:101E9000020E00B400000004020E00B800000000B2
-:101EA000020E00BC00000002020E00C00000000292
-:101EB000020E00C400000000020E00C80000000274
-:101EC000020E00CC00000007020E00D0000000024D
-:101ED000020E00D400000002020E00D80000000133
-:101EE000020E014400000001020E014C000000013E
-:101EF000020E015000000002020E02040000000168
-:101F0000020E020C00000040020E02100000004011
-:101F1000020E021C00000004020E0220000000203D
-:101F2000020E02240000000E020E02280000001B18
-:101F3000060E030000000012040E0280001B035B6B
-:101F4000060E02EC00000005020E00540000000C1A
-:101F5000020E00580000000C020E005C00000000A1
-:101F6000020E006000000010060E00640000000475
-:101F7000020E00DC00000003020E01100000000F42
-:101F8000020E01140000002F020E011800000000D4
-:101F9000020E011C00000020020E000400000001DF
-:101FA000020E000800000001020E000C00000001FB
-:101FB000020E001000000001020E001400000001DB
-:101FC000020E001800000001020E001C00000001BB
-:101FD000020E002000000001020E0024000000019B
-:101FE000020E002800000001020E002C000000017B
-:101FF000020E003000000001020E0034000000015B
-:10200000020E003800000001020E003C000000013A
-:10201000020E004000000001020E0044000000011A
-:102020000730040000AF0000083007680013037693
-:1020300007340000331C00000734800032780CC8DD
-:10204000073500001A801967083539B058CA037877
-:10205000013000000000000001300004000000001A
-:1020600001300008000000000130000C00000000FA
-:1020700001300010000000000130001400000000DA
-:1020800002300020000000010230002400000002A5
-:1020900002300028000000030230002C0000000085
-:1020A0000230003000000004023000340000000163
-:1020B00002300038000000000230003C0000000147
-:1020C0000230004000000004023000440000000024
-:1020D00002300048000000010230004C0000000304
-:1020E00002300050000000000230005400000001E7
-:1020F00002300058000000040230005C00000000C4
-:1021000002300060000000010230006400000003A3
-:1021100002300068000000000230006C0000000186
-:102120000230007000000004023000740000000063
-:1021300002300078000000040230007C0000000340
-:102140000630008000000002023000A400003FFFC3
-:10215000023000A8000003FF02300224000000004B
-:1021600002300234000000000230024C0000000087
-:10217000023002E40000FFFF0630200000000800EB
-:1021800002338BC000000001023380000000001AFF
-:10219000023380400000004E0233808000000010B7
-:1021A000023380C0000000200C3383000007A12010
-:1021B0000A338300000001380B33830000001388CA
-:1021C0000A338340000000000C338340000001F418
-:1021D0000B33834000000005023383800007A120F9
-:1021E000023383C0000001F406322A88000000C2D6
-:1021F00006322008000000C806322000000000025D
-:10220000063223E80000004004322E580004037A0E
-:10221000063250A000000004063250B80000000250
-:102220000632508000000006043250980002037EFF
-:10223000063250000000002006323000000004008A
-:1022400006321C0000000004043218300002038033
-:10225000063224E8000000B402322DB00000000075
-:1022600006324000000000B40632300000000020BA
-:10227000063231000000002006323200000000204B
-:102280000632330000000020063234000000002037
-:102290000632350000000020063236000000002023
-:1022A000063237000000002006323800000000200F
-:1022B000063239000000002006323A0000000020FB
-:1022C00006323B000000002006323C0000000020E7
-:1022D00006323D000000002006323E0000000020D3
-:1022E00006323F000000002006321C1000000002F1
-:1022F000063245A000000024063227B8000000B4D2
-:1023000002322DB400000000063242D0000000B4BA
-:1023100006323080000000200632318000000020AC
-:102320000632328000000020063233800000002098
-:102330000632348000000020063235800000002084
-:102340000632368000000020063237800000002070
-:10235000063238800000002006323980000000205C
-:1023600006323A800000002006323B800000002048
-:1023700006323C800000002006323D800000002034
-:1023800006323E800000002006323F800000002020
-:1023900006321C20000000020632463000000024F5
-:1023A0000720040000870000082007800010038237
-:1023B000072400003165000007248000081D0C5A26
-:1023C00008248EB06C9003840120000000000000FF
-:1023D00001200004000000000120000800000000AF
-:1023E0000120000C0000000001200010000000008F
-:1023F0000120001400000000022000200000000165
-:102400000220002400000002022000280000000337
-:102410000220002C00000000022000300000000418
-:1024200002200034000000010220003800000000FB
-:102430000220003C000000010220004000000004D7
-:1024400002200044000000000220004800000001BB
-:102450000220004C00000003022000500000000099
-:102460000220005400000001022000580000000477
-:102470000220005C0000000002200060000000015B
-:102480000220006400000003022000680000000039
-:102490000220006C00000001022000700000000417
-:1024A00002200074000000000220007800000004F8
-:1024B0000220007C000000030620008000000002D3
-:1024C000022000A400003FFF022000A8000003FF3C
-:1024D000022002240000000002200234000000005C
-:1024E0000220024C00000000022002E40000FFFF76
-:1024F000062020000000080002238BC0000000011D
-:10250000022380000000001002238040000000121F
-:102510000223808000000030022380C00000000EF3
-:102520000C2383000007A1200A2383000000013848
-:102530000B238300000013880A238340000000005F
-:102540000C238340000001F40B23834000000005AE
-:10255000022383800007A120022383C0000001F42E
-:10256000062250000000004206222008000000C899
-:10257000062220000000000206224000000000C6E3
-:1025800004224318000503860622432C0000000B9A
-:10259000042243580005038B0622436C0000000B05
-:1025A0000422439800050390062243AC0000000B70
-:1025B000042243D800050395062243EC0000000BDB
-:1025C000042244180005039A0622442C0000000B44
-:1025D000042244580005039F0622446C0000000BAF
-:1025E00004224498000503A4062244AC0000000B1A
-:1025F000042244D8000503A9062244EC0000000B85
-:1026000004224518000503AE0622452C0000000BED
-:1026100004224558000503B30622456C0000000B58
-:1026200004224598000503B8062245AC0000000BC3
-:10263000042245D8000503BD062245EC0000000B2E
-:1026400004224618000503C20622462C0000000B97
-:1026500004224658000503C70622466C0000000B02
-:1026600004224698000503CC062246AC0000000B6D
-:10267000042246D8000503D1062246EC0000000BD8
-:1026800004224718000503D60622472C0000000B41
-:1026900004224758000503DB0622476C0000000BAC
-:1026A00004224798000503E0062247AC0000000B17
-:1026B000042247D8000503E5062247EC0000000B82
-:1026C00004224818000503EA0622482C0000000BEB
-:1026D00004224858000503EF0622486C0000000B56
-:1026E00004224898000503F4062248AC0000000BC1
-:1026F000042248D8000503F9062248EC0000000B2C
-:1027000004224918000503FE0622492C0000000B94
-:1027100004224958000504030622496C0000000BFE
-:102720000422499800050408062249AC0000000B69
-:10273000042249D80005040D062249EC0000000BD4
-:1027400004224A180005041206224A2C0000000B3D
-:1027500004224A580005041706224A6C0000000BA8
-:1027600004224A980005041C06224AAC0000000B13
-:1027700004224AD80005042106224AEC0000000584
-:1027800006224B000000001704224B5C00010426C7
-:1027900006224B600000000304224B6C000104275A
-:1027A000062238000000004006223000000002002F
-:1027B000042251C00004042806221000000000C0BA
-:1027C000062215C00000024004221EC80008042C86
-:1027D0000622390000000008022251180000000003
-:1027E000062251D00000000606221300000000025D
-:1027F00006221410000000300622392000000008D4
-:102800000222511C00000000062251E800000006D0
-:102810000622130800000002062214D00000003037
-:102820000216100000000028021700080000000235
-:102830000217002C000000030217003C00000004F7
-:1028400002170044000000000217004800000002C8
-:102850000217004C0000009002170050000000908A
-:102860000217005400800090021700580810000062
-:10287000021700600000008A021700640000008058
-:1028800002170068000000810217006C0000008041
-:10289000021700700000000602170078000007D041
-:1028A0000217007C0000076C02170038007C10043F
-:1028B000021700040000000F06164024000000026A
-:1028C000021640700000001C0216420800000001C1
-:1028D0000216421000000001021642200000000112
-:1028E00002164228000000010216423000000001DA
-:1028F000021642380000000102164260000000018A
-:102900000C16401C0003D0900A16401C0000009CCE
-:102910000B16401C000009C40216403000000008DD
-:10292000021640340000000C02164038000000106F
-:102930000216404400000020021640000000000182
-:10294000021640D8000000010216400800000001F5
-:102950000216400C000000010216401000000001A9
-:10296000021642400000000002164248000000002B
-:1029700006164270000000020216425000000000DD
-:1029800002164258000000000616428000000002B5
-:1029900002166008000006140216600C0000060013
-:1029A00002166010000006040216601C0000FFFF03
-:1029B000021660200000FFFF021660240000FFFFE7
-:1029C000021660280000FFFF021660380000002099
-:1029D0000216603C00000020061660400000000265
-:1029E00002166048000000230216604C000000241C
-:1029F00002166050000000250216605400000026F8
-:102A000002166058000000270216605C00000029D2
-:102A1000021660600000002A021660640000002BAD
-:102A2000021660680000002C0216606C0000002D89
-:102A30000616607000000012021660B80000000167
-:102A4000021660BC00000001061660C00000003ED7
-:102A5000021661B800000001061661BC0000001FEC
-:102A60000216623807FFFFFF0216623C0000003FBB
-:102A70000216624007FFFFFF021662440000000FCB
-:102A800001166248000000000116624C00000000C0
-:102A900001166250000000000116625400000000A0
-:102AA00001166258000000000116625C0000000080
-:102AB0000116626000000000011662640000000060
-:102AC00001166268000000000116626C0000000040
-:102AD0000116627000000000011662740000000020
-:102AE00001166278000000000116627C0000000000
-:102AF000021664BC000000010C166000000003E830
-:102B00000A166000000000010B1660000000000AB9
-:102B100002168040000000060216804400000005F6
-:102B2000021680480000000A0216804C00000005D2
-:102B30000216805400000002021680CC000000043F
-:102B4000021680D000000004021680D400000004A9
-:102B5000021680D800000004021680DC0000000489
-:102B6000021680E000000004021680E40000000469
-:102B7000021680E800000004021688040000000429
-:102B8000021680300000007C021680340000003DF8
-:102B9000021680380000003F0216803C0000009CB6
-:102BA000021680F000000007061680F40000000501
-:102BB0000216880C010101010216810800000000C4
-:102BC0000216810C000000040216811000000004AF
-:102BD0000216811400000002021688100801200469
-:102BE00002168118000000050216811C0000000575
-:102BF0000216812000000005021681240000000555
-:102C00000216882C200810010216812800000008F6
-:102C10000216812C00000006021681300000000719
-:102C200002168134000000000216883001010120E4
-:102C300006168138000000040216883401010101E3
-:102C400006168148000000040216883801010101BF
-:102C500006168158000000040216883C010101019B
-:102C6000061681680000000302168174000000014E
-:102C7000021688400101010102168178000000015E
-:102C80000216817C00000001021681800000000114
-:102C9000021681840000000102168844010101012E
-:102CA00002168188000000010216818C00000004D9
-:102CB00002168190000000040216819400000002B8
-:102CC00002168848080120040216819800000005B9
-:102CD0000216819C00000005021681A0000000057C
-:102CE000021681A4000000050216881420081001B5
-:102CF000021681A800000008021681AC0000000640
-:102D0000021681B000000007021681B40000000125
-:102D10000216881801010120021681B80000000186
-:102D2000021681BC00000001021681C000000001F3
-:102D3000021681C4000000010216881C0101010175
-:102D4000021681C800000001021681CC00000001BB
-:102D5000021681D000000001021681D4000000019B
-:102D60000216882001010101021681D8000000012D
-:102D7000021681DC00000001021681E00000000163
-:102D8000021681E4000000010216882401010101FD
-:102D9000021681E800000001021681EC000000012B
-:102DA000021681F0000000010216882801010101CD
-:102DB00002168240FFFF003F061682440000000218
-:102DC0000216824CFFFF003F0216825000000100F5
-:102DD000021682540000010006168258000000020C
-:102DE00002168260000000C002168264000000C06B
-:102DF0000216826800001E000216826C00001E008F
-:102E0000021682700000400002168274000040002A
-:102E100002168278000080000216827C000080008A
-:102E2000021682800000200002168284000020002A
-:102E30000616828800000007021682A40000000126
-:102E4000061682A80000000A021681F400000C0891
-:102E5000021681F800000040021681FC000001000B
-:102E600002168200000000200216820400000017F3
-:102E700002168208000000800216820C0000020088
-:102E8000021682100000000002168218FFFF01FFE8
-:102E900002168214FFFF01FF0216823C000000139D
-:102EA000021680900000013F021680600000014081
-:102EB00002168064000001400616806800000002CF
-:102EC00002168070000000C0061680740000000723
-:102ED0000216809C00000048021680A000000048F6
-:102EE000061680A400000002021680AC0000004814
-:102EF000061680B00000000702168238000080002D
-:102F000002168234000025E40216809400007FFF40
-:102F100002168220000000070216821C0000000733
-:102F2000021682280000000002168224FFFFFFFF25
-:102F300002168230000000000216822CFFFFFFFF05
-:102F4000021680EC000000FF0214000000000001E7
-:102F50000214000C000000010214004000000001F7
-:102F60000214004400007FFF0214000C0000000067
-:102F700002140000000000000214006C00000000B9
-:102F800002140004000000010214003000000001DF
-:102F900002140004000000000214005C00000000A5
-:102FA00002140008000000010214003400000001B7
-:102FB000021400080000000002140060000000007D
-:102FC00006028000000020000202005800000032CB
-:102FD000020200A003150020020200A40315002035
-:102FE000020200A801000030020200AC081000003C
-:102FF000020200B000000033020200B40000003002
-:10300000020200B800000031020200BC0000000310
-:10301000020200C000000006020200C4000000031B
-:10302000020200C800000003020200CC00000002FF
-:10303000020200D000000000020200D400000002E2
-:10304000020200DC00000000020200E000000006B6
-:10305000020200E400000004020200E80000000296
-:10306000020200EC00000002020200F00000000179
-:10307000020200FC00000006020201200000000025
-:103080000202013400000002020201B0000000014F
-:103090000202020C00000001020202140000000102
-:1030A00002020218000000020202040400000001F3
-:1030B0000202040C00000040020204100000004064
-:1030C0000202041C00000004020204200000002090
-:1030D0000202042400000002020204280000001F73
-:1030E00006020500000000120402048000200434DF
-:1030F000020200600000000F0202006400000007EE
-:1031000002020068000000000202006C0000000ED5
-:103110000602007000000004020200F40000000437
-:103120000202000400000001020200080000000189
-:103130000202000C00000001020200100000000169
-:103140000202001400000001020200180000000149
-:103150000202001C00000001020200200000000129
-:103160000202002400000001020200280000000109
-:103170000202002C000000010202003000000001E9
-:1031800002020034000000010202003800000001C9
-:103190000202003C000000010202004000000001A9
-:1031A0000202004400000001020200480000000189
-:1031B0000202004C00000001020200500000000169
-:1031C00002020108000000C802020118000000020B
-:1031D000020201C400000000020201CC0000000055
-:1031E000020201D400000002020201DC0000000221
-:1031F000020201E4000000FF020201EC000000FFF7
-:103200000202010C000000C80202011C00000002C2
-:10321000020201C800000000020201D0000000000C
-:10322000020201D800000002020201E000000002D8
-:10323000020201E8000000FF020201F0000000FFAE
-:1032400007280400008D00000828076800130454B4
-:10325000072C000034090000072C800038990D036A
-:10326000072D0000390C1B2A072D80000641296E0E
-:10327000082D8AB04EAA0456012800000000000064
-:1032800001280004000000000128000800000000E0
-:103290000128000C000000000128001000000000C0
-:1032A0000128001400000000022800200000000196
-:1032B0000228002400000002022800280000000369
-:1032C0000228002C0000000002280030000000044A
-:1032D000022800340000000102280038000000002D
-:1032E0000228003C00000001022800400000000409
-:1032F00002280044000000000228004800000001ED
-:103300000228004C000000030228005000000000CA
-:1033100002280054000000010228005800000004A8
-:103320000228005C0000000002280060000000018C
-:10333000022800640000000302280068000000006A
-:103340000228006C00000001022800700000000448
-:103350000228007400000000022800780000000429
-:103360000228007C00000003062800800000000204
-:10337000022800A400003FFF022800A8000003FF6D
-:10338000022802240000000002280234000000008D
-:103390000228024C00000000022802E40000FFFFA7
-:1033A0000628200000000800022B8BC0000000014E
-:1033B000022B800000000000022B8040000000185B
-:1033C000022B80800000000C022B80C000000066F1
-:1033D0000C2B83000007A1200A2B8300000001387A
-:1033E0000B2B8300000013880A2B83400000000091
-:1033F0000C2B8340000001F40B2B834000000005E0
-:10340000022B83800007A120022B83C0000001F45F
-:10341000062A3D4800000004042A3D5800020458D2
-:10342000062A3D6000000006062A30000000004821
-:10343000062A2008000000C8062A2000000000021A
-:10344000062A31280000008E062A33680000000397
-:10345000042A33740001045A062A3A780000000254
-:10346000042A3A800002045B042A3A700002045DD8
-:10347000042A3E280002045F042A3EB000040461CE
-:10348000042A250000020465062A25080000010020
-:10349000062A297000000004042A29600004046739
-:1034A000042A2F480002046B062A3378000000D853
-:1034B000022A3A3800000000062A3A88000000324A
-:1034C000042A3D880010046D062A502000000002E6
-:1034D000062A503000000002062A500000000002B8
-:1034E000062A501000000002022A50B80000000115
-:1034F000062A50480000000E042A3D780002047D90
-:10350000062A3C1800000026022A50400000000055
-:10351000062A36D8000000D8022A3A3C00000000F3
-:10352000062A3B5000000032042A3DC80010047FE8
-:10353000062A502800000002062A50380000000227
-:10354000062A500800000002062A50180000000257
-:10355000022A50BC00000001062A50800000000E24
-:10356000042A3D800002048F062A3CB00000002699
-:10357000022A504400000000021010080000000160
-:103580000210101000000264021010000003D000AE
-:10359000021010040000003D091018000200049100
-:1035A00009101100001006910610114000000008DB
-:1035B00009101160000806A1061011800000000229
-:1035C00009101188000606A9061011A000000018B5
-:1035D000021010100000000006102400000000E09F
-:1035E0000210201C0000000002102020000000013A
-:1035F000021020C0000000010210200400000001A1
-:10360000021020080000000109103C00000506AF70
-:1036100009103C20000506B409103800000506B961
-:1036200002104028000000100210404400003FFF3C
-:103630000210405800280000021040840084924A82
-:1036400006104C000000010002104058000000006D
-:103650000610806800000004021080000000108046
-:1036600006108028000000020210803800000010C0
-:10367000021080400000FFFF021080440000FFFFA6
-:1036800002108050000000000210810000000000C5
-:10369000061081200000000202108008000002B520
-:1036A0000210801000000000061082000000004A96
-:1036B000021081080001FFFF061081400000000297
-:1036C0000210800000001A80061090000000002404
-:1036D000061091200000004A061093700000004A76
-:1036E000061095C00000004A0210800400001080FF
-:1036F00006108030000000020210803C0000001024
-:10370000021080480000FFFF0210804C0000FFFF05
-:10371000021080540000000002108104000000002C
-:1037200006108128000000020210800C000002B583
-:103730000210801400000000061084000000004AFF
-:103740000210810C0001FFFF0610814800000002FA
-:103750000210800400001A800610909000000024DF
-:10376000061092480000004A061094980000004A93
-:10377000061096E80000004A0212049000E383401D
-:103780000212051400003C10021205200000000285
-:1037900002120494FFFFFFFF02120498FFFFFFFFD5
-:1037A0000212049CFFFFFFFF021204A0FFFFFFFFB5
-:1037B000021204A4FFFFFFFF021204A8FFFFFFFF95
-:1037C000021204ACFFFFFFFF021204B0FFFFFFFF75
-:1037D000021204B8FFFFFFFF021204BCFFFFFFFF4D
-:1037E000021204C0FFFFFFFF021204C4FFFFFFFF2D
-:1037F000021204C8FFFFFFFF021204CCFFFFFFFF0D
-:10380000021204D0FFFFFFFF021204DCFFFFFFFFE4
-:10381000021204E0FFFFFFFF021204E4FFFFFFFFBC
-:10382000021204E8FFFFFFFF021204ECFFFFFFFF9C
-:10383000021204F0FFFFFFFF021204F4FFFFFFFF7C
-:10384000021204F8FFFFFFFF021204FCFFFFFFFF5C
-:1038500002120500FFFFFFFF02120504FFFFFFFF3A
-:1038600002120508FFFFFFFF0212050CFFFFFFFF1A
-:1038700002120510FFFFFFFF021204D4FFFF3330D6
-:10388000021204D8FFFF3340021204B4F0003000EB
-:1038900002120390000000080212039C00000008BE
-:1038A000061203A000000002021203BC0000000484
-:1038B000021203C400000004021203D00000000042
-:1038C000021203DC000000000212036C0000000181
-:1038D000021203680000003F021201BC0000004019
-:1038E000021201C000001808021201C400000803FF
-:1038F000021201C800000803021201CC00000040BF
-:10390000021201D000000003021201D400000803DB
-:10391000021201D800000803021201DC00000803B3
-:10392000021201E000010003021201E4000008039A
-:10393000021201E800000803021201EC000000037B
-:10394000021201F000000003021201F40000000363
-:10395000021201F800000003021201FC0000000343
-:103960000212020000000003021202040000000321
-:1039700002120208000000030212020C0000000301
-:1039800002120210000000030212021400000003E1
-:1039900002120218000000030212021C00000003C1
-:1039A00002120220000000030212022400000003A1
-:1039B00002120228000024030212022C0000002F31
-:1039C0000212023000000009021202340000001945
-:1039D00002120238000001840212023C000001833E
-:1039E0000212024000000306021202440000001905
-:1039F00002120248000000060212024C00000306F8
-:103A000002120250000003060212025400000306D4
-:103A10000212025800000C860212025C000003062B
-:103A20000212026000000306021202640000000697
-:103A300002120268000000060212026C000000067A
-:103A4000021202700000000602120274000000065A
-:103A500002120278000000060212027C000000063A
-:103A6000021202800000000602120284000000061A
-:103A700002120288000000060212028C00000006FA
-:103A800002120290000000060212029400000006DA
-:103A900002120298000000060212029C00000006BA
-:103AA000021202A000000306021202A4000000138A
-:103AB000021202A800000006021202B00000100468
-:103AC000021202B400001004021203240010644029
-:103AD0000212032800106440021201B0000000012D
-:103AE0000600A000000000160200A06CBF5C0000F1
-:103AF0000200A070FFF51FEF0200A0740000FFFF9E
-:103B00000200A078F00003E00200A07C00000000AA
-:103B10000200A0800000A0000600A08400000005B4
-:103B20000200A0980FE000000600A09C0000001416
-:103B30000200A0EC555400000200A0F05555555568
-:103B40000200A0F4000055550200A0F8F0000000AB
-:103B50000200A0FC555400000200A1005555555527
-:103B60000200A104000055550200A108F000000069
-:103B70000600A22C000000040200A0600000030761
-:103B80000200A10CBF5C00000200A110FFF51FEFB6
-:103B90000200A1140000FFFF0200A118F00003E0E2
-:103BA0000200A11C000000000200A1200000A000F3
-:103BB0000600A124000000050200A1380FE000006B
-:103BC0000600A13C000000140200A18C5554000026
-:103BD0000200A190555555550200A194000055557D
-:103BE0000200A198F00000000200A19C55540000C2
-:103BF0000200A1A0555555550200A1A4000055553D
-:103C00000200A1A8F00000000600A23C0000000491
-:103C10000200A06400000307000000000000000094
-:103C20000000002E00000000000000000000000066
-:103C30000000000000000000000000000000000084
-:103C40000000000000000000000000000000000074
-:103C50000000000000000000000000000000000064
-:103C60000000000000000000000000000000000054
-:103C70000000000000000000002E004D00000000C9
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA00000000000004D008B00000000000000003C
-:103CB0000000000000000000000000000000000004
-:103CC00000000000000000000000000000000000F4
-:103CD000008B009000900094009400980000000079
-:103CE00000000000000000000000000000000000D4
-:103CF000000000000000000000000000009802DE4C
-:103D000002DE02E802E802F200000000000000000B
-:103D100000000000000000000000000000000000A3
-:103D20000000000000000000000000000000000093
-:103D30000000000000000000000000000000000083
-:103D40000000000000000000000000000000000073
-:103D50000000000000000000000000000000000063
-:103D60000000000000000000000000000000000053
-:103D70000000000000000000000000000000000043
-:103D80000000000000000000000000000000000033
-:103D90000000000000000000000000000000000023
-:103DA0000000000000000000000000000000000013
-:103DB0000000000000000000000000000000000003
-:103DC00000000000000000000000000000000000F3
-:103DD000000000000000000002F202FA00000000F3
-:103DE00000000000000000000000000000000000D3
-:103DF00000000000000000000000000000000000C3
-:103E000000000000000000000000000000000000B2
-:103E100000000000000000000000000000000000A2
-:103E20000000000000000000000000000000000092
-:103E300002FA02FF02FF030A030A03150000000052
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E60000000000000000000000000000000000052
-:103E70000000000000000000000000000000000042
-:103E80000000000000000000031503160000000001
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB000000000000316035700000000000000008F
-:103EC00000000000000000000000000000000000F2
-:103ED00000000000000000000000000000000000E2
-:103EE0000357037B000000000000000000000000FA
-:103EF00000000000000000000000000000000000C2
-:103F0000000000000000000000000000037B03BB75
-:103F100000000000000000000000000000000000A1
-:103F20000000000000000000000000000000000091
-:103F3000000000000000000003BB03F700000000C9
-:103F40000000000000000000000000000000000071
-:103F50000000000000000000000000000000000061
-:103F60000000000003F7043D043D045204520467BE
-:103F70000000000000000000000000000000000041
-:103F80000000000000000000000000000000000031
-:103F9000046704ED04ED04F204F204F700000000ED
-:103FA0000000000000000000000000000000000011
-:103FB00000000000000000000000000004F704F80A
-:103FC00000000000000000000000000000000000F1
-:103FD00000000000000000000000000000000000E1
-:103FE000000000000000000004F8050A00000000C6
-:103FF00000000000000000000000000000000000C1
-:1040000000000000000000000000000000000000B0
-:1040100000000000050A051F051F052205220525D1
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:1040400005250555000000000000000000000000EC
-:104050000000000000000000000000000000000060
-:10406000000000000000000000000000055505DC15
-:104070000000000000000000000000000000000040
-:104080000000000000000000000000000000000030
-:10409000000000000000000005DC05E305E305E783
-:1040A00005E705EB00000000000000000000000034
-:1040B0000000000000000000000000000000000000
-:1040C0000000000005EB062B062B06330633063BEB
-:1040D00000000000000000000000000000000000E0
-:1040E00000000000000000000000000000000000D0
-:1040F000063B068806880695069506A20000000085
-:1041000000000000000000000000000000000000AF
-:1041100000000000000000000000000006A206AE43
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:10414000000000000000000006AE06B40000000001
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:104170000000000006B406B70000000000000000C8
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A00006B706BD0000000000000000000000008F
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000006BD06BE68
-:1041D00006BE06D006D006E2000000000000000087
-:1041E00000000000000000000000000000000000CF
-:1041F000000000000000000006E2074F0000000081
-:1042000000000000000000000000000000000000AE
-:10421000000000000000000000000000000000009E
-:1042200000000000074F0750075007630763077639
-:10423000000000000000000000000000000000007E
-:10424000000000000000000000000000000000006E
-:10425000000000000000000000000000000000005E
-:10426000000000000000000000000000000000004E
-:10427000000000000000000000000000000000003E
-:10428000000000000000000000000000000000002E
-:10429000000000000000000000000000000000001E
-:1042A000000000000000000000000000000000000E
-:1042B00000000000000000000000000000000000FE
-:1042C00000000000000000000000000000000000EE
-:1042D00000000000000000000000000000000000DE
-:1042E00000000000000000000000000000000000CE
-:1042F00000000000000000000000000000000000BE
-:1043000000000000000000000000000000000000AD
-:10431000000000000000000000000000000000009D
-:10432000000000000000000000000000000000008D
-:1043300000010000000204C00003098000040E40D8
-:1043400000051300000617C000071C80000821406C
-:1043500000092600000A2AC0000B2F80000C344000
-:10436000000D3900000E3DC0000F42800010474094
-:1043700000114C00001250C00013558000145A4028
-:1043800000155F00001663C00017688000186D40BC
-:1043900000197200001A76C0001B7B80001C804050
-:1043A000001D8500001E89C0001F8E800000934004
-:1043B00000002000000040000000600000008000BD
-:1043C0000000A0000000C0000000E00000010000AC
-:1043D0000001200000014000000160000001800099
-:1043E0000001A0000001C0000001E0000002000088
-:1043F0000002200000024000000260000002800075
-:104400000002A0000002C0000002E0000003000063
-:104410000003200000034000000360000003800050
-:104420000003A0000003C0000003E000000400003F
-:10443000000420000004400000046000000480002C
-:104440000004A0000004C0000004E000000500001B
-:104450000005200000054000000560000005800008
-:104460000005A0000005C0000005E00000060000F7
-:1044700000062000000640000006600000068000E4
-:104480000006A0000006C0000006E00000070000D3
-:1044900000072000000740000007600000078000C0
-:1044A0000007A0000007C0000007E00000080000AF
-:1044B000000820000008400000086000000880009C
-:1044C0000008A0000008C0000008E000000900008B
-:1044D0000009200000094000000960000009800078
-:1044E0000009A0000009C0000009E000000A000067
-:1044F000000A2000000A4000000A6000000A800054
-:10450000000AA000000AC000000AE000000B000042
-:10451000000B2000000B4000000B6000000B80002F
-:10452000000BA000000BC000000BE000000C00001E
-:10453000000C2000000C4000000C6000000C80000B
-:10454000000CA000000CC000000CE000000D0000FA
-:10455000000D2000000D4000000D6000000D8000E7
-:10456000000DA000000DC000000DE000000E0000D6
-:10457000000E2000000E4000000E6000000E8000C3
-:10458000000EA000000EC000000EE000000F0000B2
-:10459000000F2000000F4000000F6000000F80009F
-:1045A000000FA000000FC000000FE000001000008E
-:1045B000001020000010400000106000001080007B
-:1045C0000010A0000010C0000010E000001100006A
-:1045D0000011200000114000001160000011800057
-:1045E0000011A0000011C0000011E0000012000046
-:1045F0000012200000124000001260000012800033
-:104600000012A0000012C0000012E0000013000021
-:10461000001320000013400000136000001380000E
-:104620000013A0000013C0000013E00000140000FD
-:1046300000142000001440000014600000148000EA
-:104640000014A0000014C0000014E00000150000D9
-:1046500000152000001540000015600000158000C6
-:104660000015A0000015C0000015E00000160000B5
-:1046700000162000001640000016600000168000A2
-:104680000016A0000016C0000016E0000017000091
-:10469000001720000017400000176000001780007E
-:1046A0000017A0000017C0000017E000001800006D
-:1046B000001820000018400000186000001880005A
-:1046C0000018A0000018C0000018E0000019000049
-:1046D0000019200000194000001960000019800036
-:1046E0000019A0000019C0000019E000001A000025
-:1046F000001A2000001A4000001A6000001A800012
-:10470000001AA000001AC000001AE000001B000000
-:10471000001B2000001B4000001B6000001B8000ED
-:10472000001BA000001BC000001BE000001C0000DC
-:10473000001C2000001C4000001C6000001C8000C9
-:10474000001CA000001CC000001CE000001D0000B8
-:10475000001D2000001D4000001D6000001D8000A5
-:10476000001DA000001DC000001DE000001E000094
-:10477000001E2000001E4000001E6000001E800081
-:10478000001EA000001EC000001EE000001F000070
-:10479000001F2000001F4000001F6000001F80005D
-:1047A000001FA000001FC000001FE000002000004C
-:1047B0000020200000204000002060000020800039
-:1047C0000020A0000020C0000020E0000021000028
-:1047D0000021200000214000002160000021800015
-:1047E0000021A0000021C0000021E0000022000004
-:1047F00000222000002240000022600000228000F1
-:104800000022A0000022C0000022E00000230000DF
-:1048100000232000002340000023600000238000CC
-:104820000023A0000023C0000023E00000240000BB
-:1048300000242000002440000024600000248000A8
-:104840000024A0000024C0000024E0000025000097
-:104850000025200000254000002560000025800084
-:104860000025A0000025C0000025E0000026000073
-:104870000026200000264000002660000026800060
-:104880000026A0000026C0000026E000002700004F
-:10489000002720000027400000276000002780003C
-:1048A0000027A0000027C0000027E000002800002B
-:1048B0000028200000284000002860000028800018
-:1048C0000028A0000028C0000028E0000029000007
-:1048D00000292000002940000029600000298000F4
-:1048E0000029A0000029C0000029E000002A0000E3
-:1048F000002A2000002A4000002A6000002A8000D0
-:10490000002AA000002AC000002AE000002B0000BE
-:10491000002B2000002B4000002B6000002B8000AB
-:10492000002BA000002BC000002BE000002C00009A
-:10493000002C2000002C4000002C6000002C800087
-:10494000002CA000002CC000002CE000002D000076
-:10495000002D2000002D4000002D6000002D800063
-:10496000002DA000002DC000002DE000002E000052
-:10497000002E2000002E4000002E6000002E80003F
-:10498000002EA000002EC000002EE000002F00002E
-:10499000002F2000002F4000002F6000002F80001B
-:1049A000002FA000002FC000002FE000003000000A
-:1049B00000302000003040000030600000308000F7
-:1049C0000030A0000030C0000030E00000310000E6
-:1049D00000312000003140000031600000318000D3
-:1049E0000031A0000031C0000031E00000320000C2
-:1049F00000322000003240000032600000328000AF
-:104A00000032A0000032C0000032E000003300009D
-:104A1000003320000033400000336000003380008A
-:104A20000033A0000033C0000033E0000034000079
-:104A30000034200000344000003460000034800066
-:104A40000034A0000034C0000034E0000035000055
-:104A50000035200000354000003560000035800042
-:104A60000035A0000035C0000035E0000036000031
-:104A7000003620000036400000366000003680001E
-:104A80000036A0000036C0000036E000003700000D
-:104A900000372000003740000037600000378000FA
-:104AA0000037A0000037C0000037E00000380000E9
-:104AB00000382000003840000038600000388000D6
-:104AC0000038A0000038C0000038E00000390000C5
-:104AD00000392000003940000039600000398000B2
-:104AE0000039A0000039C0000039E000003A0000A1
-:104AF000003A2000003A4000003A6000003A80008E
-:104B0000003AA000003AC000003AE000003B00007C
-:104B1000003B2000003B4000003B6000003B800069
-:104B2000003BA000003BC000003BE000003C000058
-:104B3000003C2000003C4000003C6000003C800045
-:104B4000003CA000003CC000003CE000003D000034
-:104B5000003D2000003D4000003D6000003D800021
-:104B6000003DA000003DC000003DE000003E000010
-:104B7000003E2000003E4000003E6000003E8000FD
-:104B8000003EA000003EC000003EE000003F0000EC
-:104B9000003F2000003F4000003F6000003F8000D9
-:104BA000003FA000003FC000003FE000003FE001E8
-:104BB00000000000000001FF0000020000007FF87C
-:104BC00000007FF80000016A0000150000000001ED
-:104BD0000000FF00000000000000FF0000000000D7
-:104BE00000000000140AFF000000000100000000A7
-:104BF00000201001000000000100860000000100FC
-:104C00000000860200008604000086060000860878
-:104C10000000860A0000860C0000860E0000861048
-:104C20000000861200008614000086160000861818
-:104C30000000861A0000861C0000861E00008620E8
-:104C400000008622000086240000862600008628B8
-:104C50000000862A0000862C0000862E0000863088
-:104C60000000863200008634000086360000863858
-:104C70000000863A0000863C0000863E0000864028
-:104C800000008642000086440000864600008648F8
-:104C90000000864A0000864C0000864E00008650C8
-:104CA0000000865200008654000086560000865898
-:104CB0000000865A0000865C0000865E0000866068
-:104CC0000000866200008664000086660000866838
-:104CD0000000866A0000866C0000866E0000867008
-:104CE00000008672000086740000867600008678D8
-:104CF0000000867A0000867C0000867E00008680A8
-:104D00000000868200008684000086860000868877
-:104D10000000868A0000868C0000868E0000869047
-:104D20000000869200008694000086960000869817
-:104D30000000869A0000869C0000869E000086A0E7
-:104D4000000086A2000086A4000086A6000086A8B7
-:104D5000000086AA000086AC000086AE000086B087
-:104D6000000086B2000086B4000086B6000086B857
-:104D7000000086BA000086BC000086BE000086C027
-:104D8000000086C2000086C4000086C6000086C8F7
-:104D9000000086CA000086CC000086CE000086D0C7
-:104DA000000086D2000086D4000086D6000086D897
-:104DB000000086DA000086DC000086DE000086E067
-:104DC000000086E2000086E4000086E6000086E837
-:104DD000000086EA000086EC000086EE000086F007
-:104DE000000086F2000086F4000086F6000086F8D7
-:104DF000000086FA000086FC000086FE00008700A6
-:104E00000000870200008704000087060000870872
-:104E10000000870A0000870C0000870E0000871042
-:104E20000000871200008714000087160000871812
-:104E30000000871A0000871C0000871E00008720E2
-:104E400000008722000087240000872600008728B2
-:104E50000000872A0000872C0000872E0000873082
-:104E60000000873200008734000087360000873852
-:104E70000000873A0000873C0000873E0000874022
-:104E800000008742000087440000874600008748F2
-:104E90000000874A0000874C0000874E00008750C2
-:104EA0000000875200008754000087560000875892
-:104EB0000000875A0000875C0000875E0000876062
-:104EC0000000876200008764000087660000876832
-:104ED0000000876A0000876C0000876E0000877002
-:104EE00000008772000087740000877600008778D2
-:104EF0000000877A0000877C0000877E00008780A2
-:104F00000000878200008784000087860000878871
-:104F10000000878A0000878C0000878E0000879041
-:104F20000000879200008794000087960000879811
-:104F30000000879A0000879C0000879E000087A0E1
-:104F4000000087A2000087A4000087A6000087A8B1
-:104F5000000087AA000087AC000087AE000087B081
-:104F6000000087B2000087B4000087B6000087B851
-:104F7000000087BA000087BC000087BE000087C021
-:104F8000000087C2000087C4000087C6000087C8F1
-:104F9000000087CA000087CC000087CE000087D0C1
-:104FA000000087D2000087D4000087D6000087D891
-:104FB000000087DA000087DC000087DE000087E061
-:104FC000000087E2000087E4000087E6000087E831
-:104FD000000087EA000087EC000087EE000087F001
-:104FE000000087F2000087F4000087F6000087F8D1
-:104FF000000087FA000087FC000087FEFFFFFFFF2C
-:10500000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
-:10501000FFFFFFFFFFFFFFFFFFFFFFFF0000000399
-:1050200000BEBC20000000000000000500000003DE
-:1050300000BEBC20000000000000000500002000B1
-:10504000000040C000006180000082400000A3001A
-:105050000000C3C00000E4800001054000012600FC
-:10506000000146C000016780000188400001A900DE
-:105070000001C9C00001EA8000020B4000022C00C0
-:1050800000024CC000026D8000028E400002AF00A2
-:105090000002CFC00002F08000001140000080003C
-:1050A000000103800001870000020A8000028E00D8
-:1050B00000031180000395000004188000049C0088
-:1050C00000051F800005A300000626800006AA0038
-:1050D00000072D800007B100000834800008B800E8
-:1050E00000093B800009BF00000A4280000AC60098
-:1050F000000B4980000BCD00000C5080000CD40048
-:10510000000D578000005B0000007FF800007FF872
-:1051100000000166000015000000FF000000000014
-:105120000000FF0000000000000019000000000067
-:1051300000000000FFFFFFFF00007FF800007FF885
-:1051400000000361000015000000FF000FFFFFFFDB
-:105150000000FF000FFFFFFF000000FF0000FF0046
-:105160000FFFFFFF0000FF000FFFFFFF000000FF29
-:105170000000FF000FFFFFFF0000FF000FFFFFFF19
-:10518000000000FF0000FF000FFFFFFF0000FF0016
-:105190000FFFFFFF000000FF0000FF000FFFFFFFF9
-:1051A0000000FF000FFFFFFF000000FF0000FF00F6
-:1051B0000FFFFFFF0000FF000FFFFFFF000000FFD9
-:1051C0000000FF000FFFFFFF0000FF000FFFFFFFC9
-:1051D000000000FF0000FF000FFFFFFF0000FF00C6
-:1051E0000FFFFFFF000000FF0000FF000FFFFFFFA9
-:1051F0000000FF000FFFFFFF000000FF0000FF00A6
-:105200000FFFFFFF0000FF000FFFFFFF000000FF88
-:105210000000FF000FFFFFFF0000FF000FFFFFFF78
-:10522000000000FF0000FF000FFFFFFF0000FF0075
-:105230000FFFFFFF000000FF0000FF000FFFFFFF58
-:105240000000FF000FFFFFFF000000FF0000FF0055
-:105250000FFFFFFF0000FF000FFFFFFF000000FF38
-:105260000000FF000FFFFFFF0000FF000FFFFFFF28
-:10527000000000FF0000FF000FFFFFFF0000FF0025
-:105280000FFFFFFF000000FF0000FF000FFFFFFF08
-:105290000000FF000FFFFFFF000000FF0000FF0005
-:1052A0000FFFFFFF0000FF000FFFFFFF000000FFE8
-:1052B0000000FF000FFFFFFF0000FF000FFFFFFFD8
-:1052C000000000FF0000FF000FFFFFFF0000FF00D5
-:1052D0000FFFFFFF000000FF0000FF000FFFFFFFB8
-:1052E0000000FF000FFFFFFF000000FF0000FF00B5
-:1052F0000FFFFFFF0000FF000FFFFFFF000000FF98
-:105300000000FF000FFFFFFF0000FF000FFFFFFF87
-:10531000000000FF0000FF000FFFFFFF0000FF0084
-:105320000FFFFFFF000000FF0000FF000FFFFFFF67
-:105330000000FF000FFFFFFF000000FF0000FF0064
-:105340000FFFFFFF0000FF000FFFFFFF000000FF47
-:105350000000FF000FFFFFFF0000FF000FFFFFFF37
-:10536000000000FF0000FF000FFFFFFF0000FF0034
-:105370000FFFFFFF000000FF0000FF000FFFFFFF17
-:105380000000FF000FFFFFFF000000FF0000FF0014
-:105390000FFFFFFF0000FF000FFFFFFF000000FFF7
-:1053A0000000FF000FFFFFFF0000FF000FFFFFFFE7
-:1053B000000000FF0000FF000FFFFFFF0000FF00E4
-:1053C0000FFFFFFF000000FF000000FF000000FFD4
-:1053D0000000FF00000000000000FF0000000000CF
-:1053E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
-:1053F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
-:1054000000001000000020800000310000004180FA
-:1054100000005200000062800000730000008380E2
-:10542000000094000000A4800000B5000000C580CA
-:105430000000D6000000E6800000F70000010780B1
-:105440000001180000012880000139000001498096
-:1054500000015A0000016A8000017B0000018B807E
-:1054600000019C000001AC800001BD000001CD8066
-:105470000001DE000001EE8000000F0000000000CF
-:1054800000007FF800007FF80000021D00001500FA
-:1054900010000000000028AD00010001FFFFFFFF29
-:1054A000FFFFFFFF00050206CCCCCCC17058103CBA
-:1054B000000000000000FF00000000000000FF00EE
-:1054C000000000000000000000000001CCCC020140
-:1054D000CCCCCCCCCCCC0201CCCCCCCC00000000D1
-:1054E000FFFFFFFF0000FFFF000000000000FFFFC4
-:1054F000000000000000FFFF000000000000FFFFB0
-:10550000000000000000FFFF000000000000FFFF9F
-:10551000000000000000FFFF000000000000FFFF8F
-:1055200000000000000E0000011600D60000FFFF82
-:10553000000000000000FFFF000000000000FFFF6F
-:10554000000000000000FFFF000000000000FFFF5F
-:10555000000000000000FFFF000000000000FFFF4F
-:10556000000000000000FFFF0000000000720000CB
-:10557000012300F3FFFFFFF3318FFFFF0C30C30C5B
-:10558000C30C30C3CF3CF300F3CF3CF30000CF3C5F
-:10559000CDCDCDCDFFFFFFF130EFFFFF0C30C30CC1
-:1055A000C30C30C3CF3CF300F3CF3CF30001CF3C3E
-:1055B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2C
-:1055C000C30C30C3CF3CF300F3CF3CF30002CF3C1D
-:1055D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C2
-:1055E000C30C30C3CF300014F3CF3CF30004CF3CE6
-:1055F000CDCDCDCDFFFFFFF2304FFFFF0C30C30C00
-:10560000C30C30C3CF3CF300F3CF3CF30008CF3CD6
-:10561000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF7
-:10562000C30C30C3CF3CF300F3CF3CF30010CF3CAE
-:10563000CDCDCDCDFFFFFFF731EFFFFF0C30C30C19
-:10564000C30C30C3CF3CF300F3CF3CF30020CF3C7E
-:10565000CDCDCDCDFFFFFFF5302FFFFF0C30C30CBC
-:10566000C30C30C3CF3CF300F3CF3CF30040CF3C3E
-:10567000CDCDCDCDFFFFFFF3318FFFFF0C30C30C3D
-:10568000C30C30C3CF3CF300F3CF3CF30000CF3C5E
-:10569000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9F
-:1056A000C30C30C3CF3CF300F3CF3CF30001CF3C3D
-:1056B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2B
-:1056C000C30C30C3CF3CF300F3CF3CF30002CF3C1C
-:1056D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C1
-:1056E000C30C30C3CF300014F3CF3CF30004CF3CE5
-:1056F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFF
-:10570000C30C30C3CF3CF300F3CF3CF30008CF3CD5
-:10571000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF6
-:10572000C30C30C3CF3CF300F3CF3CF30010CF3CAD
-:10573000CDCDCDCDFFFFFFF730EFFFFF0C30C30C19
-:10574000C30C30C3CF3CF300F3CF3CF30020CF3C7D
-:10575000CDCDCDCDFFFFFFF5304FFFFF0C30C30C9B
-:10576000C30C30C3CF3CF300F3CF3CF30040CF3C3D
-:10577000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CF1
-:10578000C30C30C3CF3CF3CCF3CF3CF30000CF3C91
-:10579000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CD1
-:1057A000C30C30C3CF3CF3CCF3CF3CF30001CF3C70
-:1057B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CB1
-:1057C000C30C30C3CF3CF3CCF3CF3CF30002CF3C4F
-:1057D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C91
-:1057E000C30C30C3CF3CF3CCF3CF3CF30004CF3C2D
-:1057F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C71
-:10580000C30C30C3CF3CF3CCF3CF3CF30008CF3C08
-:10581000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C50
-:10582000C30C30C3CF3CF3CCF3CF3CF30010CF3CE0
-:10583000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C30
-:10584000C30C30C3CF3CF3CCF3CF3CF30020CF3CB0
-:10585000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C10
-:10586000C30C30C3CF3CF3CCF3CF3CF30040CF3C70
-:10587000CDCDCDCDFFFFFFF3320FFFFF0C30C30CBA
-:10588000C30C30C3CF3CF300F3CF3CF30000CF3C5C
-:10589000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9D
-:1058A000C30C30C3CF3CF300F3CF3CF30001CF3C3B
-:1058B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C29
-:1058C000C30C30C3CF3CF300F3CF3CF30002CF3C1A
-:1058D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BF
-:1058E000C30C30C3CF300014F3CF3CF30004CF3CE3
-:1058F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFD
-:10590000C30C30C3CF3CF300F3CF3CF30008CF3CD3
-:10591000CDCDCDCDFFFFFF8A042FFFFF0C30C30C90
-:10592000C30C30C3CF3CC000F3CF3CF30010CF3CDE
-:10593000CDCDCDCDFFFFFF9705CFFFFF0C30C30CC2
-:10594000C30C30C3CF3CC000F3CF3CF30020CF3CAE
-:10595000CDCDCDCDFFFFFFF5310FFFFF0C30C30CD8
-:10596000C30C30C3CF3CF300F3CF3CF30040CF3C3B
-:10597000CDCDCDCDFFFFFFF3300FFFFF0C30C30CBB
-:10598000C30C30C3CF3CF300F3CF3CF30000CF3C5B
-:10599000CDCDCDCDFFFFFFF1300FFFFF0C30C30C9D
-:1059A000C30C30C3CF3CF300F3CF3CF30001CF3C3A
-:1059B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C28
-:1059C000C30C30C3CF3CF300F3CF3CF30002CF3C19
-:1059D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BE
-:1059E000C30C30C3CF300014F3CF3CF30004CF3CE2
-:1059F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFC
-:105A0000C30C30C3CF3CF300F3CF3CF30008CF3CD2
-:105A1000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF3
-:105A2000C30C30C3CF3CF300F3CF3CF30010CF3CAA
-:105A3000CDCDCDCDFFFFFF97040FFFFF0C30C30C82
-:105A4000C30C30C3CF3CC000F3CF3CF30020CF3CAD
-:105A5000CDCDCDCDFFFFFFF5300FFFFF0C30C30CD8
-:105A6000C30C30C3CF3CF300F3CF3CF30040CF3C3A
-:105A7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEE
-:105A8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8E
-:105A9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCE
-:105AA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6D
-:105AB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAE
-:105AC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4C
-:105AD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8E
-:105AE000C30C30C3CF3CF3CCF3CF3CF30004CF3C2A
-:105AF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6E
-:105B0000C30C30C3CF3CF3CCF3CF3CF30008CF3C05
-:105B1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4D
-:105B2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDD
-:105B3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2D
-:105B4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAD
-:105B5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0D
-:105B6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6D
-:105B7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CED
-:105B8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8D
-:105B9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCD
-:105BA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6C
-:105BB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAD
-:105BC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4B
-:105BD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8D
-:105BE000C30C30C3CF3CF3CCF3CF3CF30004CF3C29
-:105BF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6D
-:105C0000C30C30C3CF3CF3CCF3CF3CF30008CF3C04
-:105C1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4C
-:105C2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDC
-:105C3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2C
-:105C4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAC
-:105C5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0C
-:105C6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6C
-:105C7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEC
-:105C8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8C
-:105C9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCC
-:105CA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6B
-:105CB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAC
-:105CC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4A
-:105CD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8C
-:105CE000C30C30C3CF3CF3CCF3CF3CF30004CF3C28
-:105CF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6C
-:105D0000C30C30C3CF3CF3CCF3CF3CF30008CF3C03
-:105D1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4B
-:105D2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDB
-:105D3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2B
-:105D4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAB
-:105D5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0B
-:105D6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6B
-:105D7000CDCDCDCD000C0000000700C00002813069
-:105D8000000B81580002021000010230000F024097
-:105D900000010330000C0000000800C00002814038
-:105DA000000B81680002022000010240000702503F
-:105DB000000202C000100000000801000002818003
-:105DC000000B81A80002026000018280000E829810
-:105DD0000008038000028000000B8028000200E021
-:105DE000000101000000811000000118CCCCCCCCD7
-:105DF000CCCCCCCCCCCCCCCCCCCCCCCC00002000F3
-:105E0000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCD2
-:105E100000002000CCCCCCCCCCCCCCCCCCCCCCCCD2
-:105E2000CCCCCCCC00002000000000000000000022
-:105E30001F8B080000000000000BFB51CFC0F003D7
-:105E40008ABB5819180238107C7AE0A58C94E9DFD7
-:105E5000C8CCC0B00388AF02F17E66D2F5B34A2346
-:105E6000D8F7241818182419184E893130EC9244A8
-:105E700088E702D5084A3130DC858A0500D967A554
-:105E8000E81B4EA39836F8BB3A2AFF912A84CE87A6
-:105E900089A3C93F86CA6F5480D03FD5B19BBB0947
-:105EA0002A0F00FE694F6760030000000000000039
-:105EB0001F8B080000000000000BED7D0B7854D50F
-:105EC000B9E8DACFD933994C7642422610700703ED
-:105ED000040D30208FA85427E1D1E0E5E8F0462EEC
-:105EE000CA80AF0892448D356D39373B6412020287
-:105EF0008ECAA1B4A53A207AA247DBD4464B7BF5E3
-:105F0000DC206A73DAD37B9152A52DB6413D281669
-:105F100068F49403BDD796BBFE7FAD3DD97B672661
-:105F20000F5FDF395F1B3EDD597BAFBDD6BFFEF78C
-:105F3000FAFF7FEDA8A242D44B08B9083FD712B2AE
-:105F40004E2084E4F55EADFB448B56935C42AA82FE
-:105F5000AAB1953E5B2F858DC669F4FE2562E809DE
-:105F600002F7C7CD21930851E0BD0242A6C2FFA6A9
-:105F70001322E7B40E8FFAE93D6955165CADF1AC1A
-:105F80006B954C883E159E6F1B97EA7972FE84D202
-:105F9000D3AD11FCB9388690FAE337CE7FC56AD30A
-:105FA000FF4692CCDC9397D35F6692991725423EC9
-:105FB0002A5C94D569A41FEF83862E5D1E4BC8F919
-:105FC0008615F35F19DBF7F97A89D4B697F6BD7FAA
-:105FD00015D1102F4433D5C8C4DE75AF27A4D39391
-:105FE00043C8E6C24D6CBDB9145957D2FB6DFFA230
-:105FF000CB25BD70AE9769BFA97DD7438889E35A89
-:10600000E324DF4F7439DE77BF971C8FBF4F64FAEC
-:106010006F0621D885AE7FBA10BD16EE7B0A1799A0
-:1060200023687BFD33E5245A9A1EFE24BD3E21FCE5
-:10603000D67B69E9C8FB7DB4BFA985D0F74EAAF12C
-:10604000EBAFA27CF4DEF7A5D026E0A33DE3E7901A
-:1060500000BD4F181F59743AB5BF69782AFE4847EA
-:10606000A7BF275EE43F8BBFAAC455599DE493F3B5
-:10607000D71DC05F1936FE6A5FDCEF789F94BF6260
-:106080006EFEE2F838DDCED64F760F6374E1F4721F
-:10609000D3272D5D3EE97B7DF9690BE0D5D3BED8D2
-:1060A0001C4152F01387D7A2D7A78577203E222420
-:1060B0008E74262422C1FCBDF7D935A3CC1080CF25
-:1060C00068F330AC23C8A622C15B5BEE16299C01A5
-:1060D00092681D5744DBDD6B1600DC81E3F34F81D2
-:1060E0003C34872AB4D974BDFA34E3A179F49A51C7
-:1060F000AA0BB09EAD44042540C7AB36CB4B815EA6
-:1061000004DB4F9BB7844DC0030913329C90FBF80E
-:106110009A08110D99B655F8754CAA75A8A493E183
-:1061200043B8E8E9FB7EBAF5ABBDEF918B45F0FFD4
-:106130007B08AC6FA0F74894BD67D27F80EF1CD777
-:1061400038FA1CDAB6F17D80D8DAF4F951F805F1A5
-:106150007DF717325F36D9A719543FA825A29E8034
-:10616000FEC4C896693BA3922A22781E24072945BB
-:1061700006A44B332195EDC08FA49D2C9CD80BDF3A
-:106180002922E07A0A6EDFB9A685AAAE7365FE10F1
-:10619000F079502764584EDFF56C6BA08C3CDED64E
-:1061A0000E3D87FC1FA37C3486BE6F86983DDC5A6B
-:1061B000F2B21EB5C977862070BE74F30731E419B8
-:1061C0002066C02AF45A2286BD814FCF1FB20B8FA2
-:1061D00083E50F7FD4461F32747A05B9DF3058FE4D
-:1061E000F8B4F35974ED2B578D165D3542E9B0A51F
-:1061F00078514AFF233D5DF711E89F5142C289144F
-:10620000EF8D12042E07A643DFE095D2474A92F79E
-:106210005E07BDA4FC192BF6F6830F29D7890F6BF7
-:106220005C6FBD64BC4B5522917511C653613CCA6D
-:10623000A75B820F9B84CAC339E06D8A0F293EA5F4
-:1062400013DAA498201FD29F4E81B6BDC170622B75
-:10625000F24102E962C1E73144077EE55C9FA34D4C
-:106260005698821D7E6FBD8A70A8E823D071743A5B
-:10627000204585EC279DC0B716BF021B5CBC14DA15
-:106280005F77F041AB3195A4A283C5AF8056C6AF0E
-:106290005F1F9C7E71CFB7C409EFA0DFF3CBC64967
-:1062A0009B1D4AFF9E4C4E5AF4A148AC82016C7C67
-:1062B000B059210784C98434152E23517A77333C91
-:1062C000A276AC05AE05E01F4E45BD40DA0419E0EC
-:1062D000B4EC2A09E660BFE98281E3895A2DEA1508
-:1062E000C91F66F6953F4F0F179B7FB8110FEB1430
-:1062F000BFF9241E16297DA8AE0C7512D09B610231
-:106300007C40428C2F24EEA75BEFC7383F7BC951FE
-:106310007C9F6A5753477BE694E3B9127D48C7D9FF
-:106320005242121EA4535C83B65C2213D81750FD50
-:10633000E42FA0FDB32CF697168400FE2C6E5FC9E7
-:106340002CCEDF02D56714CFFE694EF9F6B9E45FB3
-:10635000E6F6B88F3E4BB39FB0AE6EFFED3181FBDA
-:106360006F19C48FF4E6EF137F6A7FD5F2DB2CBC84
-:10637000E68904F1497EAA249E28E26BA3ED7BDE28
-:10638000CA4EC0BACD8AC89A668A07F36D21D40472
-:10639000F494C33D59F4F9C92725DC2FE52DABBF93
-:1063A00004E6DBDE608E2DB6F983DBE55A0DF04D99
-:1063B000F942B3DB8B1B48F405C1B6FFF2045BC6A0
-:1063C000160F43FE7BBBBB044C8580FCE7F5C78200
-:1063D000AF825CF2FB49FCD8DB52DF766E3EE1F621
-:1063E000F286F2309DB71574D7087C6C0A149ED6DD
-:1063F00002D6FE49E3F072B09FAD99ACFD51E33B8C
-:10640000E146E48BA816A1F7EA09C74B17C50BD2E2
-:10641000DFC8B7DB57F7D5BDFE1DB2EE033EDBEBA1
-:10642000CFB9AE04EC67991802B4EF8D1DD1D7D85F
-:10643000F0F14D4FC51B808F91242110A05F2C17C8
-:10644000E5C7F2E780F1A05DC0E5A9901CC67EA378
-:10645000233DE50ADC5AA1BF0CD796E073D9284F3B
-:10646000648E7E12E55F122E5E3E78794FB7DE8035
-:106470004022A9FCF9FBA51C94ABC034BA6E875E20
-:106480002FD4911FF9B85F031A81FEC8A6304D06BC
-:106490003D125F114931DE4F0411FB69600FAEA060
-:1064A00068285C56F66F74BD9A169EF22A85CB93C7
-:1064B000EB0F990836B3130697014FBC5103FC92BA
-:1064C000A31201F9D70AC391DB804F49242CD0FBDA
-:1064D0005A301CDA6AF45D9F4A987DC8A1D78B4C6C
-:1064E000BE09F4BF274FC7FE04EC85B5AE31009757
-:1064F0008A707D06F4CE15A70F4CE711A4BD1C8C45
-:10650000593A7A7FD6744EF7BE9BBE0181C9D7FD3A
-:106510004DE7C32695A796E3822881528C17235D09
-:10652000344E97F34A5403BF71CB5745B28FB61F11
-:10653000ADEFDF4F89819FE2B1D94D9DD16FE45D11
-:10654000FA5460A174EFEDBA4BAC4CA4E0A74A91A9
-:10655000E9FD2D773D1C1F0BF47CC5B9DF53568533
-:10656000D12FA5FBBE4AA087F59EB798D927B29F29
-:10657000AE87F657B83F723E6F511649318F75DDC1
-:10658000E382BF90E23995DCDC2771FF6A271BDFCD
-:10659000F277CE17F43FBE859F0B9522395C8A6453
-:1065A000F59152BE188AF7C2A4DF9D876D0F7F94C4
-:1065B000A8157D04EC5E6167395C15D2D3087CBAFE
-:1065C0004B2455A9E05B2B89085F61986E3DA8DEDE
-:1065D0002F3445D04CE45EC9C0FBF9AB6A0F2A9456
-:1065E0002EADA34808CCCC25301EE8D5835EB49FE1
-:1065F0006A2E4978A99E7EADE82B26D865BD908489
-:106600000116BD16F69CF43F6A5F0DFA5CD9183589
-:1066100011AE6004F708878A9621BD5BA87FE76109
-:106620000B71F0538B297602DFC6E9F8E00FC68DB7
-:106630000A94D773416AF9E1E7630ABFB5DFB8147A
-:10664000E242949400E70419E1A423317AEA0C2F82
-:106650002377CF229DD4EEB466EF427930AF242861
-:10666000AF32396C0A6067E48429527863554C1F55
-:1066700028B971C16EC7F690E88376BE91F54EF4E5
-:10668000FF5AFF2CAD4885D76A91E9B7FBB83E3C6D
-:10669000AFB4CF477FA399CA4751DFFE614E876FE2
-:1066A000C7163D381EF519B34BD6F32EC170C43151
-:1066B000475E50713D6EBF661EF76B5A0AA95F8335
-:1066C000F24E16801F93C1F9A305B0479F7BB249D4
-:1066D000C2A47064803F43FD1252CAFC128DFE03B7
-:1066E000FD97BFC2E9CF785C7E4B3A7FE66B42E410
-:1066F00007A8EFA8AA02F8770BF1F9E300DF057409
-:106700003F69F45D7717DF4FCE95B615B550B81ECB
-:10671000CB151DFC309ACBCB63C43C71913E8F17D7
-:106720008A06C01DAF17711DE70CE6B79377BD0E43
-:106730003BD16C2ED2884DFFECE0F2B4AD4173C872
-:10674000ADFBEA57E3D1480ABDA573FA64CC0A63EE
-:10675000FCC31F4A20FD619DA9FCF4074A2BB4FE2F
-:10676000F49F5CA2AE41FC15569C92E15AE6DE2FE6
-:10677000A51ED77D25763F534ADF6FB0D72D144F26
-:106780006F2B0E7FBC53827D9749D0FFF386A8A95B
-:106790000AC0551F0EF07B4354DCE0DA5D5E09F75A
-:1067A0008D59110DE4C8B2CFDE50642BDCCFFA92C4
-:1067B000BC05E8E52D174589D24F934D9263939B15
-:1067C000A970D3C6DF99545DDAF1A145BF52097EA5
-:1067D0002A2914C9580AC7E68F1B343B9DBAE836EC
-:1067E00084ED5B9D7C13AFEF5FCF7E5ABEF8B96836
-:1067F000C5439CF4C21F7B3C84D33949FF3E718D55
-:10680000FF1CF4D638FD0C4ABF4D06D093E90BBAF5
-:10681000F142FF21AE996168C70D43346D7AEC6394
-:106820003107F1205F90512FED5ED312067AE974A3
-:106830000C202DBD8653D9ED2E4145B9A27AE32A0D
-:10684000693A2A6401E29F73A58D48EFC728BD41CC
-:106850008F3D466ABB2EE6F6CABF1655D18FEF6A4A
-:1068600034CB1B8B87A237297CD4AF237B98FF7254
-:1068700089E5BFFC3DE59341F82BE7A9D1E0F6D8C7
-:106880000B7C25775396A670156E6476137CB51C29
-:10689000DA36A8DDEB147AF9D1C3E7514A1387C77A
-:1068A00023BD9DF6E9B1C297050FD8B76266DF54E4
-:1068B000B3330C7A26504CED1341FBB31AF033A2DC
-:1068C000245E0EED91BBE7E13ABE0D7EA81FEC0BF6
-:1068D000417C7C534C349A9466BE70A4539460FF00
-:1068E0004C707F67D1CF3D2FB57A484F5FB6B81750
-:1068F000E814A83D0CCBB4DBBD6A29AFD71E8E28A7
-:10690000E94475EBF617D2FA097F96F87E6C666358
-:1069100098B647C1AFD49FDC293EDE08FBB188277B
-:106920005C8F7477ED239271281EEF5E5B6609958C
-:10693000B1FC37749E3BBB140A00013F40B2C781D3
-:10694000EE04BB44F5CD5A6ED76E2591003C3C4316
-:10695000448CAF9D21470257D8F870A7A4B2795A4A
-:1069600095B7217E6FC5776F8BB3B6A57FEED8ED57
-:106970006CDF4E160D87F8EDED3B155CFF9DAE7D8F
-:106980006B4CD271DC3B486D0BE0A15921E827AC80
-:10699000D5890CF1D80D3FFCCE0CD8277C9BDB951C
-:1069A0000F287F1936FDB3CE9F50613FFB4EC715B0
-:1069B000CBAE26F07EA26504ECCBB3494A3B7A4BC2
-:1069C000AB13BE81E077C34BC8A67EE190DB849415
-:1069D000F1C3A724C11137ACD70293206872DECB74
-:1069E000AE6605D31FE66FBD8926F0132583F7AF8A
-:1069F0009DCCF21CB533E13AD07B3FE3FEE850DF9B
-:106A00003B9CE6BD0D5AB70AFC5F239B9582D81BC1
-:106A1000AFD294DAF04890E303E59D2389A35FEBBE
-:106A200020FB558AFDF473C37B4AD74C71725FB863
-:106A30006F20D1B740EECE8BD16A8C1370B83D80F9
-:106A40006709AE32D213E3274530AFBF55C882384D
-:106A50004A07FA275E4376D0BBC6D203542F41DCE7
-:106A600027A3C4F9DC1D57E949D2B513E50B43A2AE
-:106A7000744901CDDF2981BF58269F4EF6A7F355F3
-:106A8000C3BA266327D42F755CBF5413E3C159D30F
-:106A900050BE305E57377F8C0970D4E51921D30082
-:106AA000351A0AE3182EBEAAB92090846DFF5D2323
-:106AB000F7A8204735547FDBEFDF1364F1E4747AE5
-:106AC0005B219AE12F01BF56443C493A6DDBD6FD6C
-:106AD000515CA86C67FBAAAC25FDEC8BEF09B27882
-:106AE000F1DA2D63B358DCC5A9AFCE72FBF0936722
-:106AF0001E57BB41CF3C7DE27A58E7FAFF29118D42
-:106B0000CE7BF6994CD2897623A182DD58D721A578
-:106B1000B4878434B1FCF9F732915EEB9EF324160E
-:106B2000D0F7D7BDF0CE2442E13BBBA9E7B591E059
-:106B30004F3F2DB0B8B8D93D6931BDBF4E26AB53DC
-:106B4000C55926C86C1F72FA47192B407E85B6833B
-:106B500037E3B8EDCB15B0AB563F4356905F693F76
-:106B6000B4DBE6534262AC900A3E968F38FD94C087
-:106B7000E03BA0E0FE6F5DDB5E354AE1A869FB10FB
-:106B8000F5C5ECEF3D1B003CD41C901C7E5C4D9B7E
-:106B9000D4E99984D713708538AB3003F884F34B6C
-:106BA000C7068CAF56B73FF0A11480F79D7A8BE2F1
-:106BB00025D409787D530A2D80F60FFE316050549C
-:106BC0007D70F88900E0958EBB46CD8238BE93BFBC
-:106BD00061FC0B397DC7A39C8EF9DE9AF62D6C3EC5
-:106BE000975EFC007E29E81B878DC8CE3C3A691B66
-:106BF0005C9E77FDB3E71E35E97CA79FFBFDA326CE
-:106C000085FBAEBFFCFBA35F07B9FC67AF0E7ABD87
-:106C1000E6E95F06888D0FD7C92C7E707614DD42B9
-:106C2000D17E677FE549804370F6A5F7461B74BDAA
-:106C300067BFFFA7E106ED5FF7D2DC7C587FDDF38D
-:106C4000B3F3FBF363804F131E3B5C091CDF38205A
-:106C50003067E1457E75D1E550C7A1D100E7996362
-:106C60001EDC9FD5D07BF553814E1BD0CE427B23BB
-:106C7000C56FF5339B3F04FDD017CFE64811835F06
-:106C8000540D0681CEEFCC437A911EB48FEEFE35C3
-:106C900047291D27A7A7DB39F2B10A7AAEE6992D5D
-:106CA0006C3E17DDCEC02F57F6A5DB6617DDCE9103
-:106CB000BB1E2B80C46BC730471EC1BAF6C6CF239C
-:106CC00059917EF48325FF03E115F32C14AEA572D0
-:106CD000F81B32C8D1731949BA2E00BA3E7B6E3404
-:106CE000A17CF1BED27333D8839E973CFA3E7A7F63
-:106CF000DD4B6FA25C9D7DFE75D5403B46FC02F5E9
-:106D00002BCF92E4CF61F033AB99CF496AF6677627
-:106D10007A02BDF4A94E2CAC340278FF04DE4F3069
-:106D20007EAF4E1C5C22A4A0D7EBF218A6FF13790D
-:106D300088970DFB7FA312BF938E4219D0F1C43CFC
-:106D4000B89F8E8ED6FA7558FF4C1B3DF7333975B8
-:106D5000F7AFA6F208F62E49D784F02649219767A7
-:106D6000F77A64B07767C1AF4A993765FECC50F3C4
-:106D70002B3F939DF557C9FC0AC7437AFE60F23D4D
-:106D8000D0FA868ABF1FC9068EEBC6E3E98F53EBA4
-:106D9000FBF7B8BEA82666E5884BFBFA2132899836
-:106DA000238B7AE13D0D1B54CA7FA79F96301ED4DA
-:106DB000D27E08F5B65B4F54A7896F5E90999F50BD
-:106DC0007DE0E024D067A75FFE11F267F53327541A
-:106DD0008817BFD6F603B5BBB4571EC01E246CF689
-:106DE000E0F4770F4E627A808E9F824E8AC2C6AFE1
-:106DF00079D1397ECD331F3AC65F6FB6A37F30D0CD
-:106E00003C1FC8E1E5B0DE0F0E2B04F4E807ED529D
-:106E1000652ABFF6036E0F2D3CB5BC3EEF379007D9
-:106E20009B76C46780DDECD814CEDF0EFEDA1185C8
-:106E300080DE2672F8F71EDAEE78DD67407EBAE370
-:106E4000C832C9B0ED437FE8C2E7CCA3E6EC4C3AC8
-:106E5000DECCEEC8347051DD7AA3EC38DD57D9F8BA
-:106E6000A0EEF5CA7CD0F7B00F35C6C37CA120ECEC
-:106E700073A5C0BC4A96BF16756F4A7BCDC653FC3E
-:106E8000118C5729BA988C91C1B82349A211E2AB51
-:106E9000C4EF77E727229A3D0FB5E2F041D862E6CA
-:106EA0002E7EB100C60990987E12FD4F12BAD88F7F
-:106EB000FFE5CE4758F84CCA5F9AFC44867E73F0D3
-:106EC00020E93B5EDF3C4C5483F8768B7F6D6B9101
-:106ED0002D0FD312EC938799AB503CB40A2465BCB8
-:106EE00076BC52315FC9C3DD7134D5F39B1426578C
-:106EF000D792EE7BD7009C1196CF99E5C2D79738F1
-:106F0000BEFE79325D3855A1E5E05951FCCE5E12E6
-:106F10008E29F4FEDC553D97BF8CDD793EC71C2FD2
-:106F20005ECC183CFE869AB78B7816DDAE0C226FCD
-:106F3000972E7FDC0B87C9F7E3398E3CC6A1B7EEED
-:106F4000D7BA31CF50DB5A648BFB0DEFF49230E6A9
-:106F5000F10CF40F8777DEF9CDDB20EE9C5B18F2A5
-:106F600092BEE3C817AEC6B89195CF970BC39D10DC
-:106F7000EF9775A35CC279968721BFB0D960F9827B
-:106F8000CDC1FEE37A339468B382F1A86B705C5193
-:106F9000E3F507835CE737160710CF018A67907720
-:106FA000DCFFC0FA8E0B3C6FDE6D4A903F3C918D4A
-:106FB000F982804C4A201E705EF08536613EC19990
-:106FC000374FC7BFDB6513F3E6AD469FBCF97714B7
-:106FD0005BBE414B9337D7FC4B306FAE119BBF5B11
-:106FE000D4DBAF57EE5C7973180BE332DB67435C9D
-:106FF000A6399B38F2E6CD20F85711F29C72F56C59
-:10700000AC3BF3F2E7E6ACD9617B9B1C7F19DB3C20
-:10701000FEF4C7E6739BA07FEE48528B756A7284BC
-:107020002CB5E9C1F71416A7DDA0847FA8D8EB8E94
-:10703000383F58F99F436FBD877C05D73114AFCDDA
-:1070400094AF3CC857A7885DAF5A578B7F9A8DFE87
-:10705000F942BD3005E366C976D044BE0804A3E119
-:10706000708AF7267998DC5BF306CAA81EA5F2A6FB
-:107070001811CC47A93ADDF01A83873F1D5C169F93
-:10708000361B63581D944EB07E2FFD3AA6B13826AC
-:1070900044B8285CBB6EBC3DD49F9F63AD73861221
-:1070A0003E69C77BEE25A9EB77AB55B6EEE6C82A5D
-:1070B000965FAF72E653217D6D8FB34E17A2FFAE80
-:1070C000609C90E553452DC2F323A6151F0F26E3C0
-:1070D000E106D419DE65823E5456B59B025C7359B5
-:1070E0003E25578B7EACD8EC83AC7733B975E5077A
-:1070F000E74AA787845FAB2E6E6B838E7EFA9686F7
-:1071000020B6373718786D6908E37D371D9B8D975A
-:1071100083B7605D9A0FE3B2E9C67FB02184E3C410
-:107120001ACAD8783C6F4E486613F0952A5AF23244
-:107130000CDB7E893F370B9A40FEB60BECF9352D00
-:1071400097A2BC59FCB3C3E83F2E2D2566201F0C27
-:1071500075FCBEFCFA135C67F32C3FEAD781E42888
-:10716000AB93CD3BD87994A4BD60F3EC98A5E13CFA
-:107170003B72079827CEE619187E86AF6D074F61E0
-:107180001D8242F9015494A28753D7E97179EB3BF0
-:107190008E07F57C7390D585A9C5FE3028FF6683E0
-:1071A000E71B0B59BE512D195E01F7D5D065582745
-:1071B000AE96FA319FA7160FBF05DADB0E6ED12B04
-:1071C000C07E148A21AF0176BB9BC8B9283618BF90
-:1071D000558B4B6E83FE3AC83185639487EDB7D4E7
-:1071E000E2ABEE80F70F4E79CD68A2FD9B0B7D21BF
-:1071F0000FC85BB7ECE0FF41EB8942671E8DC854B6
-:107200005F50FDB56DCAED25289F9AAD4E3245BD44
-:10721000A04D6F6C506D7A4325734CC0433ABD430B
-:10722000EDEF7D6A5EDF71ACF73728917A15F54294
-:107230008438EBDD53E7B32D7A809B05F948399804
-:10724000ACD35B5030BC37BF6DD5E9B9F3DA71FA16
-:107250002F555EDB5D7FFE59D5E9ED5493757AA31A
-:10726000A04EEFC70A0975425EFE9752689FD197FC
-:10727000EFDCE3B9CF5B50FF47837D4E3AB9FC9911
-:10728000EACC9F16445D74BFD5EB98EF159097D26A
-:1072900081F5CBC82AE738A36A9D75B597D4E7383E
-:1072A000DA45E60847FF4B5BC7389E8F8D5FE6786F
-:1072B0003E7EF754477B42E22A47FFCBDB2A1CED98
-:1072C00089EDD739FA4F3EB0C8D19ED2B9D2D1FF9D
-:1072D0008AAEB58EE7D30FAF733C9F79EC1E47FBA8
-:1072E000CAEEAF39FAD753774805B9CDE575C8B9B5
-:1072F000F9A23D4FDB9A47ED12DDE7EFC8A30C83FF
-:10730000F16F56D7A5B2C7C9BCA1FB3DD950C33A4E
-:10731000E6FDC7CD812B91EBD09ECAC6F00A03EFE4
-:10732000CF98075732CD595FAB1AAC3E19F671CEE4
-:107330007A01679DB12A6DC33C9DE7F897BB8449EC
-:107340007DE9AA163AE560B075CA8AE17A6F88725B
-:1073500071DE928B51542E30FEF6B184E75AE6640A
-:10736000A27F61DB4F211EADFDD4351A89818B6967
-:10737000C945F9AA9E91AF62376B1FE51187521775
-:1073800067C95FC0A6F761BF62E999E6B2C1E95774
-:10739000297185C39F745F9B02EBD2E9C7028FCD31
-:1073A000BF77EBC7194AA4109E6B72D824B6780D2C
-:1073B000A9551C700F16CE4F6A07EEA20C4752E873
-:1073C0007195D462DD55CB8A300601481D71F0E914
-:1073D000CEC5FFA30CC6A57EE10CE73A995FE8F69F
-:1073E000A7A97E437F7A07F5A7D1DEB9F423D55349
-:1073F00026AFFF32981FC1F4A17B9D9F971FFD6FA1
-:10740000E0ACF643AF4051A812F787792281FD61C5
-:10741000F3AC4810E27356DDBCF55EABE7521C27B7
-:1074200096AB8A10BF8C75CDC5787D9316D5589EC6
-:10743000388AE334658B7AAA3AB13A0FCB176BF5E9
-:107440000F8CDDDF4FDC45534934553C6DA787E594
-:107450008362FADA2EB0A39979AA017BEED683A7CC
-:1074600022104792CB641DF6EB8402F38E2DBF47AA
-:107470004814E34C5A5044BBABD5EFC0F90782F730
-:10748000668FC0CF7D6CE9175EAF9A3AEE920EDE42
-:107490002D00EFB481E1F502BC4530FF369CBFC63C
-:1074A00063A4C4BF42C295B3816E27BE1CC1742BB6
-:1074B000651B908F1D656C5F4E0D8183BFAD7D0E8A
-:1074C000E5EF873D7958BF8A7C6D9D73B8D1A3E302
-:1074D0003C165D49610EC63502D1D8D862CA6F9993
-:1074E00051B69FEFD54F8C8F329530817896EC173F
-:1074F000313FA8F27888D5EF0F1C9F4DB3BA915E4B
-:107500009BAF94C926A1B7CE3A5648D735B9775D17
-:10751000FFC793CDF893CFEB234BB2B02E457A261D
-:10752000D89FDEF6717CB9F5F7F73C5C7F179002C7
-:10753000A6BF4B9743BE3BDD386E3FA69EC77987FB
-:107540005E5FCFCF17F8EFE982389315E723C16963
-:1075500029E3F2BD7865F9CA5EFA2E373A29FDE4CF
-:10756000E953314F6E9D57A0EACC592FCCE96BD12E
-:10757000D58AA393208B1F5974F626F1B9A75F7C97
-:107580007A415EAEE88BCF5F7978BEE1BF183E5F8F
-:10759000019F865E3333D9F97472E8AB04F35285E8
-:1075A0004E39B4DEB3F8DDBDFE3FFD17E5276BFDB8
-:1075B000163FA4EF6FA6DCD758F9D54CCE6F1A9CB6
-:1075C000B2A28AE7D5B2B75B2F85FD6BD08FFBBE29
-:1075D000CCB2189EEF5588A9835EC8B4F635FCBCC2
-:1075E0009155AFE42B75FA659A6BFFA2F2BAA83EEB
-:1075F000E76DB9FFE63E4795C4AF8B5E93B534F9AE
-:10760000B1419E3FDAC5F3750575F146D80F17DC19
-:10761000CAEAFDF7286435D4578EA832455F2EE4B8
-:107620006F8ABE9F41D75FF0E2438D238124B71A52
-:1076300045E0663CA3190E3B5C7057BCDCC79E4F0F
-:1076400081719ED298DE2DA88CE339E7A6E7C76743
-:10765000819FF0CA5BCB75880F7C945B8CFBA73352
-:107660002F78C2A0FFCFE4902AAC0B7B61E66BE0E1
-:10767000C7FFBEA12B47B6F1C999EFBE3E43A14457
-:107680003AF3DCEB33642456C231FF868BBF98019A
-:10769000709B15A4A416F277BA4A60DC1A8DE5CB6C
-:1076A000AC7A9F5DC3D516B8FED49BCDE289F9E2D2
-:1076B0000E68D743400CFC061ECFBFFAB4B11CEADB
-:1076C0002FB3BB1401EAF11E124CD34FAFE74F3C6E
-:1076D00024809FA576D6429885DE0F1D02949B6379
-:1076E000D9BEE47C112929A27ADF77B8763CFAD397
-:1076F000AE7A278BFFE5D904F37D3D376A09B0D711
-:10770000DB65E31BABC07EAF92B11E67BB7C18E5A7
-:10771000C24DC7E3DE31CEFA5C1E8F3EF4D61DF1BA
-:1077200072FAFE3D5344E457FF8929592485FC6EC3
-:107730006F28C3F903056F579603581FD3BB337ADD
-:10774000F7497E999859D4442A45A2A950BCF8CB50
-:107750000879DBC6772D2209EBF4F90B0D04C7E994
-:1077600068D0F0DAD6A08F2DA61B836F3504F1BA4E
-:10777000B3C1C0EBC30D25F8FCC1869043EE61BEDA
-:10778000B74B783B85BFF2795D1F68A0F3DAE0D88C
-:1077900035914A3DA5D72E9E8F7AA0746AD6DA7E9F
-:1077A000E2607B1ABA86CD19CB9105F5A675FADE93
-:1077B000ADFDC0BFA75158BD08FC9ABBE5C83ED47B
-:1077C0008FD1824536FD48FDB6024259F1DE961151
-:1077D00073E614A03CA2BC4C3B1C457FBC20181790
-:1077E000208E587094DDB7CE5B20BDA8A0FD307709
-:1077F0008EA080DE2C25ED00965A1A2515B4FFCCFC
-:10780000BC25E5709F4C74DE9FA132F986712BE890
-:1078100075B616F991361DBED3B1DB7C96AEE78FF7
-:107820001D1E03F23C0FBEFC2715F605B15FA91A19
-:10783000F831052F9EC0BA8798D0AD4265EC71AD86
-:107840007A8E4CF50C6E0631BE4A150BE59318E89E
-:10785000588C7FF6C4E6F8E1BC4BF494BDFF2E5F74
-:10786000F46E7E7224AC05291F25F317EB6361BA11
-:10787000E97C81E72F8E6BEB626621B469FF29AC4E
-:107880001DA3EFBF901D1D296643D14555ACEB4BA1
-:10789000D0B6FA57C5A0DEF64DAE77883F5A04F24F
-:1078A000966CEBB49D696BCBAC4D3476B5D6BBE131
-:1078B000D09F5E033D57FDA2D00EA051BDC7F07F03
-:1078C000E021ACBB6D6BE8D2630AA7BF45072A92E3
-:1078D000138204EBE9D484901843F5C704FE7D8A33
-:1078E000826961A311F46B420981DE0CF998DF38DB
-:1078F0002141C7B1C9D58434DF41C1BC2FD0711B30
-:10790000AB1B76F3D7B35E961FA827E656C88391C4
-:1079100067141DF3913C4E79DAB2737CBF7A979766
-:1079200035954DA6EF32D03F6B648C83AD2F8A978F
-:10793000AB749EF53F2A0A51CB0A7925AC6B589F50
-:10794000DD3E7C2ACB4B39DA0FF13ADA60B6990D7D
-:10795000E707AA0F3C341AEA02AA49FCE6AF01BCC9
-:10796000FFCAF28FA70E5E9975356D6FA06D88BF47
-:107970006EE8785D8DD27EC338DCD51D53AE83F5BD
-:10798000556F138958C4E4333C9EE2391CBF4CA6A2
-:107990007C72CDD69173BD94CE4F8D09EB22E583D9
-:1079A00095BE71CD1AB4557D02C8CD4ADFC466E0DC
-:1079B000ABF513F9F71AC8C457C332AF97A27C319D
-:1079C0006C4B430CEA13F6AFACBC0ECCEC7091C917
-:1079D0002D6544CC1F4AD931CC5BFCA1999D7781A0
-:1079E00094FE464A87629974C9F4BA4B65F4335BD6
-:1079F000648C17D3FBADCA54A04B3C8CE72B5A992F
-:107A0000DE1FFBA207E3CEC5B5E13BD12FD04B7102
-:107A10009F329A247F302F7D09FC46C719AF93729D
-:107A20003887F0632F8B1716AF58B61EDE93329748
-:107A3000F8705F2EB17350E4DB2C4EBD4B4CB46B31
-:107A400020E78162A4EFAE00E30BF3E152E48BFD8B
-:107A500062C56577435C5258B3F55F80AED9C50403
-:107A6000E80AF7EFA1F7F7737A4AD9211DE8B79F23
-:107A7000D33396104DA88FB1EEBF20ACBD13E46D8B
-:107A80009DF7F9391AC5EB704F383E8CD2E14EEFB5
-:107A9000F3B16001D2618C46F17EE7968E98368A0A
-:107AA0008ED3181EA1DBDAE3FF4CBD11CC4F76A0BC
-:107AB0003CCBD90FAF0379A7CF5FD1E83A9FCAE19A
-:107AC000FA823F2F1E93D41F61426D8DD4D8AB4FE5
-:107AD000346A1F8A6DFDE7507DF0E4A3AC8EFD7A19
-:107AE0003A1FC83B5D07E67F7B26C809A8CFF25145
-:107AF00058C06FF14D1C83F57974DD04FC929E89AA
-:107B000032DA592B8EED9920627C09FA033FF84650
-:107B1000B1FE545022A037E54219F7ABB2B4273C6E
-:107B2000C180F031CBEB0AFA423CB7EA2DB1E571E6
-:107B3000496F1D30B68BF033378EF6584F7781483A
-:107B4000FDCADCE30B85D174BC3BBCDCDFCEA5FEFB
-:107B500036BDBFDECBF4D2FD11F3CB10E220467769
-:107B600001EA2712990AD7FC9B8AF3A3FDD8A5BE88
-:107B70007E7537FA0F3BFCA9CF694EF7B1FD7C93B8
-:107B8000FF880EFC564FA8FC835CE88CDF2CFD615F
-:107B90009D4F70D7135BFA44C9666BAC9B5F910F26
-:107BA0007A40E6F549B21ED2A1BEB23C731AFA7D04
-:107BB0004F7A99DE930E5E79039CD350FF95E5854D
-:107BC000F678A3184FEA2920EDC0AF72304CECF9DB
-:107BD0005F4B1FB43468787D62EAB80A909327A699
-:107BE0000EAFD0A90C1C9AF4E32EC8339DDBC3E47E
-:107BF000F7DCE1DBF0FCE33993C59B80AD302ED997
-:107C0000F9089ED77D5C8E3C8875B5501F4141DADE
-:107C100096EDACDF2AE67831B97E6A56D8F3CD0D01
-:107C20002C7EAC5EB81CE35A2AD7E39EE8AD786E92
-:107C3000C3436D199CAFD48869B2EF1D303C688591
-:107C4000CEEF61A81726E1FBA697C58FAC7A117716
-:107C50005D8805CF0C0E4FDF73194E7A58FB2F8BC2
-:107C60000ED6FB7542385FEF876F6A2E4824618B12
-:107C70007FF4D677AB78FF2CD4C567411D4F347E97
-:107C80007511C84102F7475E7F1D21FCFB4AC8A75A
-:107C900041B9C75E879EE1AA8BEF232F86B3EDAE75
-:107CA0008B580FCCC1EBF8B09E5526DF1428BDCF02
-:107CB00064FC7606F8B535543D681020924D1DE6FB
-:107CC0003FCBFD7DF9C5BBC3230D1B9F0B86639F77
-:107CD000507D6021C6116AF6FBB1DEBF1AF4DF6485
-:107CE00038376076791CE705C29D509FA71C60E37A
-:107CF0003D09F0D0FB7FD4AB0A60DDC761FF93077D
-:107D0000F6242AB1432F87110F316FF818D1993E0D
-:107D100093294FC4B22D7D561D830DC32E9538FC7B
-:107D2000A55D3EDEF655C762A5BDF51FC7B5FF8749
-:107D3000FACDAAEF38AEFD07FA43BBD47827E83B6B
-:107D4000F3058F01F68BBE8FE777CD952568076227
-:107D5000456404E0E1956C15F55CEC79CF3ED07399
-:107D6000B3B5E89B9A6DDF7026FB8DD1B0FF4A3129
-:107D70009EE9186FD4D0C6A3F377005EADE7AF6479
-:107D8000EFC2738BF43D03F386858747AFA1EDE126
-:107D90002F78F0DC90B5DF74F3653E97AF16D77996
-:107DA0004015E4CD0FFAB616E5CC1374E6C12CB934
-:107DB000532F4C70E4039E043B4BE9A7CA51085172
-:107DC000D2E7A5F8DCE47CD6C2EB11D2CF93936660
-:107DD0009E2B509ED3CF3383CB3BE1722CEBC9EF6C
-:107DE000C2F4736ED09D2771EB29EB6AE9A96F711C
-:107DF000FE9449F40A1F9D675DA27D9E0FDF8E4EA3
-:107E0000023FF8038D9D832A697BE86530CFDFF45C
-:107E100084EFF74EC7735FFFE4CD1BBA3CACF4119F
-:107E20005E97D9470F31FFEA56E6AFD6CD9F8AFE5F
-:107E30005DDDF631BAFD9CA2FB5A7521C3A1878690
-:107E4000790DFEBD3D13F551D585003EFFECE6F3FF
-:107E50003ACEAFF49DCF8FCFADF9EE72E9D943930F
-:107E60007EBA0BCEB9D77D5F113DB679EABECFEBB6
-:107E7000FFBD54EF3AE53D0CF22E1791647D17E8F3
-:107E8000876DAAD50E37CF99057EAD4D3F9481FF02
-:107E9000D5FB3E7CE76E9B8FF7372B53F7CF70F502
-:107EA0001F638DBF10FBBBE149EA1FD88FD1FEF2E3
-:107EB0009F3D167CA8BF1E125DE3E558F3DF88E303
-:107EC000597EF7456DEDABA60C7C1A2F87FD53CF7D
-:107ED0006DC480EF4F3C2E877C213BDF6A8C5FAB0B
-:107EE0002E5CEAA0772FDEC739EEBFD71074D4EB33
-:107EF000DE11ADC33AED8B3CFE54453D737C6FCF34
-:107F000048479DEEDFE0F8A4705C9D068E6BBE6076
-:107F1000388A1CF2D90B47B1E3FE278563A1C6F46A
-:107F2000D7727E9DABB373B3730D21D4446FCDA5CF
-:107F3000F7BD94D7BF4CAF1ABDCE9589E9C7EFA264
-:107F400026587FDA86FDFD0D7FBEF7DD6B315115BA
-:107F500074D41548BCCEDBAD77E09C37AB77D31C2F
-:107F6000DF87B3AE3E89D56BBAEF7FE86378F9C699
-:107F7000E5D504FC69EAABA73CB7B6CB2FF0EF7DA3
-:107F80000645479C9BB7AD3ADFCF0A2E3983CDF724
-:107F90008DCBAF2710D79573537FDFEEA09FC1DF46
-:107FA000A285B14E3CA6F7FF5D9A4F0ACFF0243C64
-:107FB000D7209EA43478AAB5E0D1595EB025F8F94F
-:107FC000C0539261D1AD7FFC6CE570930B97201F7D
-:107FD000499C4E2DB07F4BD1DFCA7FB4689F2FFCE8
-:107FE000E141D2F7B98C2F86BE8B0649DF622E079E
-:107FF0002DFAE70BCFAD8384E73A8BDF8261A4D7FC
-:10800000E705CF570609CF318B5EC6E78B9FD62495
-:10801000FFF70FCF5F38DCF9192C0ED252C2CE9386
-:10802000F8A4C88345C2C072E12B76EEB3B5429F77
-:10803000B3CEE65D67DD57BA75FE9AAF339D3CADB2
-:1080400054127940BF630D2C1EF006DF9FFCBAAAC4
-:108050002913E3F3AE795A82FB32FB8BDBFCF72A60
-:10806000E7B9DC81E4785206CBFFDC1875BEB77C3B
-:108070004586AB8ECCC47E16FED28DF7D782B73044
-:1080800024310781378AAFACA27EF60D9F35BED270
-:10809000C9DD50F115D38786AF81E4FD2B43C4972A
-:1080A00025AF7FADF8CA077C4DFF1B7F0D165F8B98
-:1080B000FE268F43C2D7AD439547EED7FEB5E26BA0
-:1080C000B0F2E8DEB7D1FD5DA8BFEF0B7CD6F87348
-:1080D000CFFF69F1688DB732CD3E2F1D3E0782C3B9
-:1080E000BA7EE81B245EDDFBCF2F1AAFAEF93F3519
-:1080F0005EF97843C6EB007058577990F26DF975C8
-:108100006D6AEAEF888ECB64DF711B2FD41E990F46
-:10811000F9E3BF93303F7D64CF9C0DF67AA071994F
-:10812000CCDF3E52397B03C44FCF4532B0F6ECA8CA
-:1081300018FAF934C82B2F62EFB9C73FC2F1E5C96D
-:10814000CCB6E2BF7940D7A391C5FDCA23A9B4AD8F
-:108150000BF34636FA4A7DF17D8418DBA7411E6297
-:10816000416A382C3AA79B77A8F43D1A797C48FAE3
-:1081700067A0F5FE877FCC20F54F02FBE592E4DF98
-:10818000DDB90CF0D926B27AB8E370AB00BEEB468D
-:10819000B0D3F215F97B814E7767B2FC61876A6CC8
-:1081A00080FC8967F182073229DD8E2ECD16ECE73F
-:1081B0002FE764B2FDD78C55A9F75D0B391FF4BECC
-:1081C0002F90F129F83BCCFB2D5DC5BE3F46E4F076
-:1081D000A845B673A7EB5DCFFBD0233380701C4D51
-:1081E00073EE7F017F7FF992FEDF27B5ECFB3E94B3
-:1081F000EF46D9CFBD26F98CCBC7197F746926BD50
-:10820000BE2144BF731FF0D1043F3B37249322A803
-:10821000BFB2C6C99549A74AF1FEAE628C82BC6660
-:108220008A716ECE9C9E7E9C7478B5D663CD03A277
-:1082300008DFE999ABB138E2B43021B3207EE80918
-:10824000DDCDF2878C0F72781DE2CCDA8C4423EC02
-:108250007B65BA4E1BBC1DFF77F67F83E71D474445
-:108260001DCFB7BBF030907E68CA64F9E45C29BAD0
-:10827000C90B7993D542CAEFD86DCC647FEF6852B1
-:1082800066B25E0AE719B733AAC0F72F96C92CFF6A
-:10829000454874D442DBFC9338BFB9DFCB9558BD59
-:1082A000117993C973DBBE75A352C9CF2FB89C4E09
-:1082B000CA2C71D4392E89DCAD807C2E59B0503156
-:1082C000FCF0DCC0F1977238DAD4E8A829FE5E3CF5
-:1082D000A5D5431C3F1DC7A24DF0DD8FD5F502D6B5
-:1082E00009946E647CB77AE3417103BDEEE5F2B7A1
-:1082F0001068601BEFBB9CAE6DFB7CA301FEB664F7
-:10830000FE860E4CE1B87937C17CC893DB4FB7408D
-:108310003EA45B203C7F726325D43574F3FAB69794
-:10832000E9F346C0DF9C3C94EF711B3FAC03FDDCDE
-:10833000A1123C2FF3BB2D9E049C27B0F825A92742
-:10834000369E6F80FAE147D4CE89C037794DB5F7B4
-:10835000A5CA9FBEC4E9F0477F242B951F685D2DF9
-:108360007D6EF55B241B4AAAFE8B2B5D768DC33D8B
-:10837000CCD37986A4C86326F930D1BF9FF64BAE23
-:10838000C77FE1CAF32E39963ACEF82BCEBF6D895E
-:108390008AF568B74C0F9E43B1E0B1F0956B323C63
-:1083A0002D5B2239F4EDEA05192EBF87E1F5068F22
-:1083B000F128ACE3917D3F9D88E7A85CF6C1274595
-:1083C00055787E07E954404FBC2F19787DA3C1F939
-:1083D000775EDE20D1EDD3C17ED64B29E5EA8F9CB6
-:1083E0007FDE5871CB52843F26E900FF8955C3AE2A
-:1083F0002F03FDB24209C177D34FC4EECDBCCDB639
-:10840000FEA45FE382EBD755B7F46BB796AF70D29B
-:10841000AD4D657E81791D93C33B298FCE42FEEA27
-:10842000DE3E93CE7F249133652BEB4EE0EF4C2D57
-:10843000E6BFBF2F4677CCA4FAE694C8F224E657ED
-:1084400098DE58B233D20CA9D353F557BCD44DFBA8
-:1084500079038CEF7E5BDFBF7D74F3D3B89D4E7FD5
-:108460006FC631A2C2FBD1BAD4F6E0DB7A06FF7B3D
-:1084700062A1D1A05F6EDA98BADFFF0266A6F09C17
-:10848000FA8B54952A3E7995CEE05D1D49FDFE5547
-:108490007A267B0E7629059ECF0532B89ED3478378
-:1084A0009E5E9D06DE0F030184F79DE6FB6F823A18
-:1084B00090F75DDF817F27C0F8E26080F1F7A97D4A
-:1084C0002B953CA0538BA0033FBC9D1D9A00FCB68E
-:1084D000267602CFBB1CE0787ED3179912980EF255
-:1084E000B2686E1EA54BC72A12128CF4FAFFCA009E
-:1084F000F31B7279BC96DABF77C1FED157DF45FF17
-:10850000430E8FBE71222B81823AF053A2B90EEB3B
-:108510000CF7F9585D29094DB7FBF15FE6709CDA5D
-:108520003F347A2F8DB8FCA03EFE5FBC1AE7DD9F7A
-:10853000A1435DCA914AA9F35A0AE4C9FD19F87D1D
-:108540005CB75CA49B7FA87EE0A9FD43F303075AB8
-:10855000F78640D1A0FCC073958FEC980672A4C634
-:1085600027A5D2BF969E3ECAE3EF6EFEB1AE5FE591
-:108570007CF47EA27FB8EED8ED84E7A65A273C961D
-:10858000BCBC9F68F2AD013C91CE8976BF94CC997A
-:108590003E809D65F9A974706E77E909E03CA0C33F
-:1085A0009D5CDFFCB6FE91809D0EEEF59F12F9FEFC
-:1085B000E05156973B36B2A622CFE8E5CF6F7D4E0D
-:1085C0007C69D919F738FFD9F9D0B27303F1616E1C
-:1085D0009A3CCE2438E84CDF5F23EB2AE4EB2705F6
-:1085E0000CD626FA3C38AA45CA78DD283146C3F9AC
-:1085F000AF53FB7CF8F7A1CCAD9EC4582A02EFEF35
-:10860000BB7A827D3DBFE27CBA7A49367E7EE27DCE
-:1086100031343F1FEBCE24FC8EDB1BC772E641FBDF
-:1086200091C32268687253DD1A09D6F74680ED3B84
-:10863000576F7C1DFDC1A1F2F9EA5AA7FDBF8AAFB1
-:1086400023E967C93DD3807FD2E1E1358E87A591CB
-:108650008573413FDFB251407DFB1318872EE4162E
-:10866000398C7A9BC4987D241AC50735212760115F
-:10867000808F7FE0DFAD9223AAFD9CDC6DDBEE9F57
-:108680000BFEA15B5E5664313EAEC86276E14D5F83
-:10869000F40FA0EF2DFDFCB6507B309F76D918D09B
-:1086A000ADEF04A39C5AEBD9C8E1A27EDAB3F8FD82
-:1086B00062BE3ED2E3E237315EFD63C07F85867ED7
-:1086C00081CF43F53ED4453FEEC33A2A4BAE2C7FD3
-:1086D000C7FDFE3239EAF01B33B38A1CFEBBDB0F49
-:1086E000F99BBD48DDFF8AAC2FD65E5C9BF5D9D8DF
-:1086F0008B619CCFDC762329D72DEC3CC889631F86
-:10870000CD4D25D7914F08875B9EDFDFE763DF4DB7
-:10871000BE2613F54EEF7E2A3F01FB65B75CC07E97
-:108720000ABEFBF1C8BE9F4D84BADE13DBEFBF2942
-:10873000153D67E9CC6F22DDF98E78DEDA00C1FAEB
-:108740006F42E77BC236BEF55E525E06885F2E5BE7
-:108750007925EE27DF5879F5E835A57DF7157DFAFF
-:108760000BD17F580AF336F2FDF40E4FD5BE54FB01
-:10877000408ED7BE7162A77FBF746379336CA9370F
-:10878000655CF3A5688AF993FB9A8DA9E3710F7272
-:108790003D95DCD798745F43F1D1BD4A0A944DEB07
-:1087A000DDD7749B9FCFBEE677A4E7E73351FE5336
-:1087B000C3F73D8BBFD4E88E2B297CA7E8FEC70406
-:1087C000F911E97BC02FDF4ABD5F7B9CBFF7BB8DF2
-:1087D00043D457C79CFB9974F2F7BDCF48FEDAD457
-:1087E0009E51A0077EB7F7E3B7EE87F5ECF521BE03
-:1087F000DDE3447489EF2F7CC8B7967DEE5099FE77
-:10880000FFDDDF8DC0BF9BED960F42E2D75F459F36
-:108810001FDF274E81EF2CB6EDCBA84AB5CF59AF5D
-:108820000B3CBEE48CF710EEDF2DE5FCA6EF7BBA27
-:10883000D61E8F7E93EB2B2B0EF0BFB3989D5DB2AF
-:1088400060A10AF19EDB92F126829B15FDB2C2BDAA
-:10885000F0FD8B5FF2F35CE6DACC94E7E37EC3F1E4
-:108860003B501C62C52A679C60C982FEEDCDC9449D
-:10887000EABA2C8B9FD3CD3754FBD296185A5E6C34
-:10888000A0758ED007675F9692DA2F41BC631909F5
-:1088900029705D426A27FE98A2F2E4EEC508CF2F48
-:1088A000ADBF7FFCF1BD13ED7ECCFF0710F667274F
-:1088B00000800000000000001F8B08000000000086
-:1088C000000BDD7D0B7854459670DDBEFD4AD24924
-:1088D0003A9DEEBC091D020818620742001FD02114
-:1088E0004482B2DA810041519A87184948A2E2CA0B
-:1088F000FEBA438720467466C2AA8CBFE3B80D82D5
-:10890000EB286AA2D1418CD8A0F8D8D59DA0AE8B17
-:10891000B3E846C7415E4322A32BB3CB0CFF39A774
-:10892000AAD2F7DE744370C7FDF6FBE338D7BAB7B7
-:108930009EE77D4E9DAAB63915C63C8C7D5B73FBC8
-:108940005F4D628CFDABB579BCD3C1D859FC9B1E81
-:108950007DFECB3AC6221731F6E13A3B8BD8A01CFC
-:1089600036558563D4FB53AA8931E8E85FE1C14AF3
-:10897000190B2D50C33B94C1F5B2705CACB7785E57
-:108980006A30463FF2B9A04665113BA3BFB3F06F12
-:10899000CD9C245DF922A753F4D39A182C62EC885D
-:1089A0001CF7513EEE91307F2FFBBB488C7B247C23
-:1089B000EE716F7E04C61D131DE78666FDB8BD2CE3
-:1089C000B48AB9619C70A2734701C3FF8CD8264456
-:1089D000DBEF759A08AEEC48A689653076876C1B8C
-:1089E00067BC0F057C8DF56BCC7E8B161FB7A77A05
-:1089F00069FEB25C33473F4F6F8A938FCB9CF981FE
-:108A000064C68E6E4BF4133CA6258747C13C2BED04
-:108A10002CE480793EF8E4C59FB1118C2D13F8AF9A
-:108A2000097C6D41781C35F5DF938CEBFAC0E4DCF2
-:108A30000143951DF45BB4F0BB2B85C3EFE8F673DF
-:108A4000C3EFAE143ECF7955FAF9CD3F98A82B1B52
-:108A5000D7FBEF7F7BEF04ECF7DFFFF63B8BB6FF36
-:108A600005A77359243D5A5E52ABF8C34583C77DB1
-:108A700029D53A24B8BF6480E392D3F9D4BF5B65AB
-:108A8000CD1D31D655EEB453FDF981728B07E0B997
-:108A9000FC6EC5A74017339CBC9FE566E6EF80F9E6
-:108AA00030B337BF1AE0EE696DBE2310A39FFF23DA
-:108AB000E0FD8D23901A8BCFE4F363410FB2DE0209
-:108AC00073D012ABFEC25A3D7C7B19AB8A35FF1FB7
-:108AD0003B395F0E951EE5F8C6FA439DC7DD820E51
-:108AE000D36D91DF33155E9C807ECA2E605C437D22
-:108AF000E3B8F73BF5F8338E7FF4CF6A5D2C38BCD2
-:108B000026F83F1800FA89F93D99BE7FC0DA1B7735
-:108B1000137F27F9762018B62FFF09A09DAD9C7D05
-:108B2000C75BF09A25A614D0FA16070E5412BB9D07
-:108B300079B018F1FE6DD5833F2985A91DB5065B77
-:108B400093A1C1D1F58A2FE41D3CCE07B84E90A366
-:108B50001FA13CBD08FB639C6E67C2FF65333646B0
-:108B6000F5D7A3506177D9BC3B347CEB5EFBDD3A93
-:108B700056CCD853D6C0FA64783FFAEEAFD73094CB
-:108B8000792C4CF3FEC2E2BB85E0CD18F1FDA16D5E
-:108B90008EAD9BA05E6A0A97938CF9F203E335725F
-:108BA000C2ECA4F250F1F3611CFC5CA89C92EB8C2B
-:108BB000370E409EE6377786A34D4965ACCBEABDBC
-:108BC00009D7D33F3BC1B90D5038D7EABF1AE1F3FB
-:108BD000C10193A9A580BA35239DCEE343B0826B32
-:108BE0000AEE1F578AF2C7E24F80A954431B36157D
-:108BF000E868862384FD957E38E719C4CF83B536AF
-:108C0000AF8AFD4DF37EAA4279EE5536EF7AE8AF92
-:108C1000AC67C45E37F43F7F8EE264D07EE6EC51F1
-:108C20009E5E585FD25AE8270747B8B7AAC2CCD889
-:108C3000D3F89F97323E6180C55C45965F6C9B0977
-:108C4000F2609CA7CBE40050AF4C7BB1CD0EFDDEB3
-:108C5000D312C872A6C1D236DFD7661FC658468661
-:108C6000BF67BA8FB1D99BEFAFB25F01EB7C54B451
-:108C70000F3DD0E6CF63EC5553B04081EFCD9B77ED
-:108C80005499015EEE4239FE2B6DFECB613D57DDFE
-:108C9000B2630DF4BF25ED9FAACC38EFC572FC9EE0
-:108CA000AA8A9130FFCB65F95FEC385F77926C0F41
-:108CB000F39DC298654474FEE62C18DF25CB9F54C3
-:108CC000CD84F13F2E6FAE30C3F8C7D2FEBDAD6884
-:108CD0002C6393E7943BFD50EEDBFC1F5549809FCE
-:108CE0002E06740AE53F6C3E4DF377AB26DE7FE837
-:108CF0008F34BFB2C5A171F85D617F6AAB8275AF79
-:108D0000B6F7BE85E4DAB43664CF4091A4703AB1C8
-:108D10005B9AFDB9003BCBAEF2482E4DA79DD36BBD
-:108D20005E643CEAB181F218288FD794B378B96BAE
-:108D30003D5B124BDE76BAB81EEE4A8CFDBD228D2D
-:108D4000CB03801BE993D483CCBF33865E1997E6AF
-:108D5000A07EF627B290DD15E5B76B8187A7005F8F
-:108D6000323B9FA7EC6790FE48E3729F85AE75216A
-:108D7000DFCCC12E60E9853E258474CD9A93C2A3D1
-:108D8000907658C43C0FF5876AA2F97A5465493544
-:108D9000F49791C8829DF0F4A4332A437B7FA723E4
-:108DA000DADF7B82EE2B0B03DBB1BFCACCEC92D6B1
-:108DB00082683F30EF0DF609BA799BA7B8F0FBDC6B
-:108DC000925B8B34F02CE2EB003AA07630CC33D3BC
-:108DD000810FBA7AC68DD804F3FB06E5AE27BAAE8A
-:108DE000B29EB91606F5B6B8843CF1F2F69E0A2E8C
-:108DF0007FFA6F4D0A6F43FEB4FB4A104FB2DD0D90
-:108E000002EE15F7CEF919D66BE8B1301BD45BD35F
-:108E1000599EC9CEA1171B4E5FC6C213356573C4D8
-:108E20008A72A7E1F4347A5F71EF7B56E453ECC7A2
-:108E30000BEB5A93E0CFF421DC5A63E39FB1169A0F
-:108E400047C3E934169AA87DCFE114EDDF4DDFCF9B
-:108E5000B7AE687F2A0BA79FAB3F2B7D1F80BB5906
-:108E6000C0DD1A7B9E1B04FD20BC4D1AFA9A2FE828
-:108E70000DA49F1FE5E1A16B8AB6A1BC8F8EBB9E9E
-:108E8000FAEF32031ED10EEC49F4A25D5C66E6F205
-:108E9000B3ACC7E50C2951FA907421F1DAE56A2EDA
-:108EA000A7F5562BCE6D0583E775BF9C97D0A79984
-:108EB0008B83EA52CDFC243F40FF5DA2FFD229C440
-:108EC0003FBFE0F4027C7303F22FDA2DB80E5F642B
-:108ED000FCDCE4C1F33F0DE4854FC02387FF5F391D
-:108EE000C2A80724DC06C33FF73CF8CCA7EF653DDA
-:108EF000FBACB8CE86387CFB802B85DA651E8CA453
-:108F000078A1DE19617774754C4CB80CF9628E89C2
-:108F1000A108C375A3BD5A36206FAF7C7706C8DBA6
-:108F2000CC8132C85B2FE26140FE46ECF668FD1F43
-:108F3000B9AE9CBD01E4B5DB06F82F223BD4CE349C
-:108F4000FEC4EE346EBF4D09B29876CBDFB9927590
-:108F500072ECFFAEAD60BF85F599D3B8DE9FD21B32
-:108F600052102F92AF8D72EA13C18F1F8BE7FFBC97
-:108F70009C52CE23A7AA859CE2EFF783998FF53206
-:108F80003222E315D089CBDE9D380AFD99DBB2543D
-:108F9000EF97C057F314DFB067A1DF1ABBF79E64E9
-:108FA0006F944E6A98DDEB40B883D17416F5FE9C41
-:108FB000042AE31FDA25A7DA154E87CC9B5A333EE5
-:108FC000BE1C92F3B82DCB4AE32DBB6F546A503BC5
-:108FD0003FA127AEB5459E658583F95C9661FEABE2
-:108FE0004DAAE6BB83EBB3B1C9FE6FD2D00E555884
-:108FF0002DCDC7602F3904DF19EDA587B16F0FFDA7
-:109000002F62233E3691739AD9660B33DE24847E19
-:109010006A660713FC1A313568E8C0EECAA3792CDA
-:109020005E081F2F01A6B4BF71C9971A3E7A07E7E1
-:10903000437A213209F934C1C57476DE623590A7CE
-:10904000A0DD9A69F3A19C013C111CF62730730244
-:109050008CFB363C116F95EAAD7B2D6EA403C5D712
-:109060004AD0DF2AFC5616417D73EDF424B25BD959
-:1090700099DB4756033C3C499C6EA11FBBE8C74E99
-:109080007422E4DEAFF3C76E43FD24E5A7C4033BBF
-:10909000A3527FF2FB7EA53ACF09E5FD9E8B4A5A8B
-:1090A00015BDFD83F650D47E4ABF6F16F0E3E4AAE7
-:1090B0008E880958A825E4997D27D4AF4CE26B1E11
-:1090C000E9E27A707F41484DC1FE46C13AE0D55B86
-:1090D00089C1A26647141F60E304117F1956783ACC
-:1090E000387FE0739F8BF3D99C748E942DE9BC9CE0
-:1090F00091C2EB1BE9ED49F17D95C2F1BBA99CCB77
-:109100000963BDE92EDEDF6A7BA82A6384D6BE0A26
-:1091100030A44333E37696DF25E8A482C3ABE2DED6
-:10912000C5A9A837BFED999FCA8AA272F41E25E887
-:10913000F441FD7B2C819F52BCE35F5486FE883551
-:109140002DE87441BDF4A4D8FEF24D621EE9E84F4B
-:1091500043BD9F087FC772FA62F2B317BAB83C4B9F
-:10916000C9AA21798E30F4A29FC2FA434E0DFE5255
-:10917000A798747E83E57431B5BF70BBA1248EDDE2
-:1091800050AAB31BE4B846FBE1D37559347FD9FE2E
-:1091900086AC8F2A99A6FE8DACF71EECEFC635B9CA
-:1091A000BA38513CBBE32E011FB4134231E765D5F9
-:1091B000BDFF14FCC49076FC237CFCE8B849C06871
-:1091C000D171FD2EFFDD2EE2A7CB9D872F864702B2
-:1091D000BC5749DF90DC07BDE4DFEA207D5485F20F
-:1091E0005AFA47C8F7CE54A4F1F20DAE491AFD2839
-:1091F000DA19E5D09F453CE3CF4E6EFFA51E94F6ED
-:1092000062A25751A2FA66B0BE127AC62017CF6783
-:109210005F03BD86B4FADFD8EF53AEEF6B5716C6C7
-:10922000A18FD1FF237665D9E541753CCACD2A854A
-:109230008D82C7E4997A3DDFEDE2FE47B72B49A75F
-:10924000E7E72ED6D78B60BD49F84C1A92BFA2D55E
-:10925000438A8AF28EF7D728E8A1E0D807562FC8AC
-:10926000DFFF1276D017E9FEB791AE3624A614A31D
-:109270007ED8FAA78A315B61DEFDEF5B7CDBB0BB99
-:109280005D9C3ECA17AD6935C37B4B87E2B4318D17
-:10929000DE5ADB79C90A58EF0792FEDD7C1D0DEE20
-:1092A0008875248C9BD3C0C7CFEBD8AB9835F22DF3
-:1092B000AF8ED73BE4B2E8F45EAF287F26FD0F16F1
-:1092C0006EA92CC5FA7EF326107D391D0AC583735D
-:1092D0009A01004007393EDEBFC31756961745D79F
-:1092E000D966AA2E42BDD09691E443BD30D61D3C2E
-:1092F0008CF4DF70281241304D3ED46346FBAEC281
-:10930000EDFF0ADFCB757A55670ECAD5A4437C7E84
-:10931000ED067A070B59D0F9362E6F55F60E437CC1
-:10932000A0EC80F132D68F21BD24EB67B8849EC8B3
-:1093300060C117C8AE626D8CF0C5681D19EB47930C
-:109340007D2FF119B5A3C64E403BAAF0818879194B
-:10935000B4DBFD58ECF8BC45E81158074BF744D78F
-:10936000118F2FA41E93F52C71FC6849EF4955B15C
-:10937000ED53D000F4BD7C91FB3A5C77C3062BB370
-:109380002951F857B803E9389F9C8EAD0AC246D2DE
-:10939000D706D7D34A2EACEFF65B985365F1E7DBDF
-:1093A000B0F6C54B5668FC2DE89FF0B1D5CAEAB4BB
-:1093B000FA54FA1317A773FD73A73B3002C76DDC8D
-:1093C000B5D98AF8BD65FBE7566DBC7BD03A8608F7
-:1093D0002FA58EFB290DB5F630AEB37C9199F057D1
-:1093E000BFC11A4679D4B0B33362427BFA6EE6430A
-:1093F0007E6FE8E87C2B07E092DBE09FA47AA3FD78
-:10940000E53684159C4F0610610FF979112BEA6738
-:10941000235DA33D8C76C95B099CDF4F943B420AD8
-:10942000C0EF8425D880F54E6427F942055178BFF6
-:10943000DD39EB1D05583AF9055B049F6DA66D59A2
-:1094400076A8D736CEEA433AAA700767A5037C5CB4
-:10945000E64017B64F7327FB5AA0ADD7C626907EBD
-:109460001E221C261BE861F2DD9C4FFE263D45DADC
-:109470007B13500E2D4D4F96F612C9A7B72C7C1DAD
-:109480001B189FEF3E977F01D1ABD345E3E63444F1
-:1094900014B4F78DE346E9C9BFF842E81BEC3C2B56
-:1094A000CAF57A2167CA176D577EABA1837A3064FB
-:1094B000905E72766E55D00F84EF2D956EAACF6CAC
-:1094C000286776F2FD887AF87E9346AEC875C49018
-:1094D0002FB7217C1D877ADEE4F22542F427E76B63
-:1094E000C4E78FD2B91D77259805F4DE1A1AE385F3
-:1094F000FEDE1A9148FD497E37F2E78F049DE7D4DE
-:109500006E57306EE04EE276A39C9FACF745FA8C26
-:10951000F5389FC9553D0487D5B566C29B9C4FA5BC
-:10952000353012FDAF76D1DFBE859F597BA1FCD0CF
-:10953000AF0E103DAE6E57FCE417B41FB0CEC7F8A7
-:109540005CE8972AC663AFE62609DBF2D201D22394
-:109550005777F138C1EAAE4EF37247944E0B8EED59
-:10956000BB11E96C75878D2528883FBE5E239D82DF
-:109570007C21BA67212BED67817C0C913C65C1028F
-:10958000F447A4FCDD27EC4BE6E0EF9F10F396FDDB
-:1095900046E56602D17BC1B109FBEC00CFD53EC5E3
-:1095A00007A612D8DBBC1EF41F21F9CBD808F4CBD8
-:1095B00064FF46F8FD5AC8D518787E3E3D861E9158
-:1095C0007AB5E0F1190C9F127F660177D9EF9E748E
-:1095D000BE9FB527DD4CFD6F28E7F1EB0D16AE3FC2
-:1095E00036B4D8C3C8D76FA75DF98E520C707259C4
-:1095F00023F8DC6F5AD680DFF7E7F079B499D68F7D
-:1096000069E6FAEBF574C25F0AE3F289CBA3875EE1
-:10961000E4F2A421E4203FB12158B382F61FDC0913
-:109620003EB4F759F04DEBFCE4283D18F1EB7D61B9
-:10963000AFD50BDFAFEEE07C10855B5847B720E776
-:1096400008EFFB5C723F2258807005FFBD05E30CFC
-:10965000D27F4F591C08257B07F36BBAF0DF27092F
-:10966000FFDD32C5FE17F5DFEBD7FE5336965765A3
-:10967000BD4B4FC92FE027EAF8EA84F0DB0E08BCA7
-:10968000FF41D04B7D6907F143FD97CDC4478E2A3A
-:109690002E4F1C87F47290B11F8BF53F40FD54266E
-:1096A000755CA9A23FFCF78AB395C59FF7CD4AF335
-:1096B0003F4F45BC74AAB42FC5CE80555F06704D90
-:1096C000103010F52C6E1EF73EF1142002F9D2DC9A
-:1096D0006C3D97FD7BBE7E59E42305F15D2F607DD7
-:1096E0006267C5D4DF613CF1A954DF2858FAF19DC7
-:1096F000F3FEE677D0FEC4F6E93ED4D3EED600D131
-:109700004FBF27C1877143B70A962DD0434BC71B64
-:109710002997E1BED833974C40B999E7E67C79ECBC
-:1097200045752DC267FD3F3C3F0DBFD7879574B48B
-:109730001B4F3CF5F77F46BD58B7BD093D0DD6FA26
-:10974000CCEB64879BC25BF9FBA752C9BE3CFAC451
-:10975000E66908F7D68E56FA7EEC89AD54DEF70F2F
-:10976000CFEFF94FB43702293EAC77ECC5CD3FFAC5
-:109770004FA4F39A141FAEA32168E6FBB692BE8DE8
-:1097800072AB732FF1A9A497AB51EF229C6AB9FC7D
-:1097900091F4FC85D8575A56E1684379F6C5A6E49A
-:1097A000BA58F144BF582FC65C488ED52A144F6B67
-:1097B00003AAC1B8465B229B82CFA4A2883517C6F4
-:1097C00059B8B8731AD93DA1CF5762FD79BB12D8E9
-:1097D000268ABF61F016EC7F2275C6C683183C0C42
-:1097E0007E32F4BEFD2CD8D71F5B309643FDE9ECEA
-:1097F000FF796DEFFE11E5688DBD77AFC71B7DDF8B
-:1098000026E234509FF44ED99AD8F1D02AB743D0EB
-:109810002DD79B395DD5795E921336DF288D5D3A61
-:10982000EC60F32610432CA7AEE74A5CC75563965D
-:109830004E24BAC0381FEA9F9083FA5F8D714AE0C8
-:10984000B3456ECE4F194EE6BE14C6AF3433B703E0
-:109850009F8C7D642139B283FA05FB83EC2AEFEB00
-:109860000B77A03DB2C512CC9E84FDB409BDB59D59
-:10987000CF1BDA3B71BF14FA735E3A81FAE9B1B8D3
-:10988000A87D88B79FB5BD4589CE1728351FF51629
-:10989000F657EA403D13AA25FC78ADB4AE635825CF
-:1098A0009BD65D7CC3F828FF1AE33B28CF701FF8D6
-:1098B0004E77F96DEE49D1A78CFB18E1F9327E871E
-:1098C000757FEBF6D3933D95AED32BF1EC957D0BE5
-:1098D0004F72FDFBEAE7246F1A918E71FCE0973A14
-:1098E000FDBB5CD2F12B9F131D2FDFC5F56FE3AEDF
-:1098F000122BD2EDF1757EF65B30401BC53EEB16A8
-:10990000A57725C5795E497062FCEEA4D037F50FC6
-:109910007C7E18F74747ECCA26BFFEE42B09B5D872
-:10992000CF7E9389E0B97FDBC55B5B15ED3CB93F2A
-:10993000007630916A23D8A9DC0E5EB119FDB3D54B
-:1099400075CC87FCDF68A09FC65D07885EA41D5CA0
-:10995000F0F8DC15DCFE4CF025A0FF3693DBA30C01
-:10996000EC51AC9F3633DC6225FA2A2943FADAB788
-:1099700070CF46D4E38D339913FBDF32CCFF4A2EF0
-:10998000AD476198CFB2C5D23EC30CEDB7547A9DB6
-:10999000004980DB76B27BD918ABD0732BC85E6EE2
-:1099A000CCBADE477C669407AFB490DDD5E84DA411
-:1099B000F95CBD4BB98DDB230EC6E7AF107D5E1D94
-:1099C000BE2C8CFBCABF17F093703C69E9B911E15A
-:1099D00071F2252044F87EF54C4EAF69333B488E3A
-:1099E000BCFDCA2CD2E3922E935FB6913E77999D2F
-:1099F0008A8FF4DA3C9B16AFED16AE97D2849E297F
-:109A00007C80E33722F82922F440C46DD5C75B9CE3
-:109A1000A162D4BBBF17F8273182F25DC893D52B62
-:109A200022C44F0D3B797F6E9BBFE4760DFDBA2BB0
-:109A3000B85E94717FDC07A88E212F7EE7E6FAB12D
-:109A4000E0F1659BD15EBE0AF08E2A25678C90A35B
-:109A5000401708B79CBA00D1C155EE9B7D6A01ED55
-:109A60001F909FD8DF6265B1E23C47851CF5A407D3
-:109A70004A31DEECC94C263BC7A3969B12B05D89E8
-:109A8000E2DBE6A5FD4DB2F3FA3DD9BE6D3A7E0F9D
-:109A9000949AA0DE918C648EE7F0AFCD73C7231F3C
-:109AA0007AA59FAEB3FB06FBDBDC6E9CD31E2A4679
-:109AB0003F44EE5F4838845B126BB5F2B34FC02170
-:109AC0003C96C7F3C1BE7750FCDA09E3A05FBFED57
-:109AD000B227B85FDF4AE31F74F3784625AC0FED79
-:109AE000364F61600DD7A7C9BE58F0B853E079DF93
-:109AF000C21B4BD0AF6CAC71F890DF1E7A55594643
-:109B0000F48CC141F4B7832B080F0CF080FCC082A9
-:109B1000DC2F6D6C0E8463D37B35F15F23F29F42A3
-:109B2000F44EF176A0F730A777AEFFA4DF8FF2B145
-:109B30003AC67EA8942F8DD6DED148C7921F1AA7A9
-:109B4000F58E46B80D559E9CB400FF23FF001C9077
-:109B50007F24BF24EFE67CB2A9C55B8EDF37553288
-:109B600067AB461F19FD259C27FA9D52AE8F7507DE
-:109B70000A3D1807304536621E8594C38DBBEF1B26
-:109B80001D2BCF4DCA61BB99CB377B3829DCAAA1ED
-:109B90002FDCDB4B9E404FCADB495A1B3B2E52E663
-:109BA000718878FDD0F222325097A3BCD996144622
-:109BB0007925E344C67EC778145D3C46FA2DB8BFCC
-:109BC00080F5E77A38BD547AB89CB85E3CE5FC2550
-:109BD000FD7B4DC1CF319F289EFE92EDFE52712B31
-:109BE000398ED4A346FCCBFD115C4F7551FC7AED48
-:109BF0007BB97C32D2E372C1275E5C2BD47B4EEC06
-:109C0000670DC62FEF87D59A75F96F6DA6CEBA5836
-:109C1000F12FB9BFC11E320F29BF6EEF3A9E47F533
-:109C20009CC8A7658BCDBA7C2A87CFDB82F1D3197C
-:109C3000F6821295C6E571ACE469EC6BD4C3C5BB82
-:109C4000DAC7609E9227A0DF1FC9AC4DD4ED3F64F8
-:109C5000075DBA726E5D8EAEFEB0E611BAEFC3D785
-:109C60008ED37D2F084DD0950BDB2ED5D51FD53E3D
-:109C7000439F8FFBC855BAFA63C37375E54D2D1D1D
-:109C8000B588978B9FBA4ED76E86D9692E01B88E4C
-:109C9000EF58A6CF1333C033F5CF6A4C3A7CD2537A
-:109CA00040789D61D6E70B5FB24B0F0F4C8BC3FE24
-:109CB0008A99E86FDA9109E7CA632D66E66F7A65DB
-:109CC000FB82C1F4C0ECBDBE400C3F53D2B92C1B8B
-:109CD000F7B1A4FCB850FA8B374F497FF1BEC78368
-:109CE000DBBB1EB90FC3E16219804BADEF5C70B1F5
-:109CF0009C0F2E0CE092FCFDE162EC6F7D5223E59F
-:109D0000037F84058D7DDC2BF84896178452B91E9D
-:109D10000ACC3B8F1DCDE3C0411BDF9F347EB7676C
-:109D200070B9361AE640F019225F7F26F070281EBF
-:109D30005FAFFD7A7F26CAEF2A467EB3B3B9E56BE3
-:109D4000D45B4BCC1186F4FF9058CF169117FAC80C
-:109D50003A27F5F3A8D87F7C6C9D97DE3FBE6E0C4A
-:109D60003DC3EB7CF47EDBBA29F4DC0EF61C3E9F8F
-:109D70005C5745CFA7D605A8DED3EB6AE9B9735D7A
-:109D800090CF6B10BE5819D93981F498F1D2A52122
-:109D9000754878626A5E4C7D19B71F75F139F3C852
-:109DA000D71E5A34FB4D0DFF666524BB0F630EE3CF
-:109DB000643619F733CFD7FEBB75B5B3DF1C3574E6
-:109DC0003E92F4C4CEA48F8EC5D741913FF9BB8794
-:109DD000CF6E0A15C5875794CE62C3A9C67E3207D7
-:109DE0009DF562B41934ED0F1AF8B826981AD36E9F
-:109DF000A811F4596BE3FBEF8B0CFCFD92F8FE52BB
-:109E000006D7779FC49133576798A43F6FA1FDC0D1
-:109E1000417CF7932B62C1777F8657C7C78B820639
-:109E2000BC1AFAF9C4D23ECC1783CFCED78F5C9F31
-:109E3000B1DDC3195C6EBDF8FF297F7E725332F924
-:109E40000F08378F66FD9FDC94541B2B2EF35A06A8
-:109E5000DF0705EB9C15B8C8D40F59D1561CC3BCFD
-:109E60007C9F77A413E343320F203EBD9A298E4492
-:109E7000305407C315F0E1B51642FFE68171226642
-:109E80001CC7678AEA59CCA9619A731EEA607A8076
-:109E9000F6212BE5EFF4E6D0BEFF05D213531F1BCE
-:109EA00075AE7DBA41ED2F50CEECF881E58CE473B0
-:109EB00076E6C151B1F4642D8E7D29AC63CBD4FB21
-:109EC00049CE9CA7DF0B855FADDA4BFBD64386DF1F
-:109ED0002EF790E2526BED29C50CFCBAEF12F83365
-:109EE0003483F1F3589F2584D1CE3F20E6098EFFBD
-:109EF00025DCAF6E9E8CCF7FCE0A7C9801ED975902
-:109F0000B99F383EC3FF119613C53EB035D3BA1181
-:109F10009FCCC9D7718958C74693371FD7F1A5E29F
-:109F20001B8B7E8AD314F6E1338545C6F3BCBB7028
-:109F300010FDB3F48B13BDE8DF268E66AC87E2E13B
-:109F4000BE048C9B5993FAFF7124F2FBEB268C30F4
-:109F5000B2E79D7CBECF3F924BFB2AE801A17C2853
-:109F6000C6F730F54D688743FB6B59F018CEEFA864
-:109F7000D31E32C1BC8A677FE1C27CA8E7BB67D031
-:109F80003E42E4293564C5730B3D27FEEE6AE8EFD7
-:109F9000921E0BC59B2F612AC9F37A337B00F926E9
-:109FA0001E3C8FFF75ECFCAE2B32B9DC93795BC69F
-:109FB000EF79E2FBF13879C48E4CAE17647E8C45A4
-:109FC000E6C778FCE7CC8FB118F2632CE600C37DBE
-:109FD00060CB407ECC6246F931D08F363FE6F88CBC
-:109FE000D8F3708B79584E27C5E93785DE1F1F716E
-:109FF000EE755A4E27E8F2ACA3ED1DF43E5E7ECE20
-:10A000007831FEF138F9496307FACF66A1746D3BE8
-:10A010002F9FF7C03879F4DD62C8F3897EE7F93DF8
-:10A020001BD2389DECCD72BA9742D74B59AF05E998
-:10A030007489C36DC1F85180F93AE9DC8ED9D2DF59
-:10A040002BF96E04D6337F8176B609242DDAD94BED
-:10A05000D65ABEE8D5C8A96ABFBECCB0BE46EE6E21
-:10A06000CA6234DFC4716328AFEF14F3A63ACF217C
-:10A070003717DB55BB59B3DE4371EC865B05FC0E2D
-:10A0800065C786DF7599DCEE88771EE2D6CC14DDD5
-:10A0900039BDDB9DE7969708DF60BAB67F231EDCEB
-:10A0A000F4FD7C70F6E0E61AC6D1CA159EBFFF1714
-:10A0B00087779A3857C5CF05580C79E89BB2B8FC1A
-:10A0C0008BCE9BE7A17FE40CDC9E8972D1EC1DADA9
-:10A0D0003D07D065F6274D80E72121778C70D99D0B
-:10A0E000C9ED37E3BABB443E7DA2CA9A3B35F0378F
-:10A0F000AEF73941E7B2FE060BDFBF82BF801DF02D
-:10A100007203E372EFE1CC11222F3CCD8CF270315F
-:10A11000EF82DDE07C8BF693249C07C14FC0DD0805
-:10A12000C700F3DE8879DBE783674796FF6184CB5E
-:10A13000D203895694FF37DAFBF7A38FDADB63FA91
-:10A1400078243C3F778C3CBC9DE1FEDB9897F7C1BF
-:10A1500033658A8FE751B09964EF28A15CF5ECC5AF
-:10A1600043B77736A604C7207F7C29F2AEA53EDA36
-:10A1700098736C34E6CF7B5DE5ABB23C1477F7A700
-:10A18000231DBD66E374F408F404E5A63D63B7A29D
-:10A190009E79302B5887F5641E1FF3F78FC63C84D9
-:10A1A0000B8513FC59908ECE07A7273219E1E75093
-:10A1B0004A6C3AF94D1C3A31F2079D2F2BFDE1F81C
-:10A1C00043C253EE5BC8F9D565713A944F093763C2
-:10A1D000FE505D9649D4E3F9880F660508CE7DC32D
-:10A1E000BE3E9C00733F64C8F792CF93421E9D6FA2
-:10A1F000FD12DE3F941C3E94187B7EA6ACA1E1E7E5
-:10A20000879A5FBD9C5F71ECF965660D0D7E01D686
-:10A21000FF59DA0FA0C700CFF58867B6A19FE4E326
-:10A220002157EC79960D799E41CB0FA16F257DB317
-:10A23000D0D23ADAAFCF4A8CB95FBF00FC27F47FA7
-:10A240008CFBF6727F1EE407ADB7C6DE7F633AE291
-:10A250007DA65877068BA4E17EE61E1BC5FF8DEB1D
-:10A26000BF42D011C0AB82E035A79FE2188746C736
-:10A27000960B15C6FA6D7C9C78E70BAECE528674B1
-:10A28000BE80950629FE576E774454C0C36D021FE9
-:10A29000D6DC553EB40FCBB3DE3B88EB04F89F18F9
-:10A2A00080A7269FEFD8BA779C232DF1E576BDFADB
-:10A2B0004259738CF5043DC11BB3347E50FD53EFFE
-:10A2C0003A476AF0359EF59AF8F9E87E93CE2FCE9C
-:10A2D0006417E41757639F988FE00A903E40FD8013
-:10A2E0007A67E3EEA925884CB433309FA73F3991B4
-:10A2F000E4686BCEA563BC1A7886B2A47DA9C6B10A
-:10A300001BFF7BF9FF51BB49D1D9AFD1FECDF45E24
-:10A31000E2A7DCF18F31F111F4F8EF213DE6F26FA5
-:10A32000C4A7117EA17B2F4FA3F30508BFE9D1FE7F
-:10A3300006F01F07CF1D1E7F3BF6D720CED1283257
-:10A340008F6F205E61761EB647E13D54BC248A784B
-:10A350001AD80D8F211D586D821F9983CE874BBB54
-:10A360008519EC1B3686FBB73764BDF7478CF76C55
-:10A370004CE12CBBF14709E4072E519C565C37D8C1
-:10A380001F9FFE1CEA0759E4D3BBC83F9476469250
-:10A390007A3669E8F394FEF2F9F2A9F7A13D06F3E3
-:10A3A000996172D0FEE63E585F36C88D1956FE2C74
-:10A3B0009F055405FDCD50F3BA7B615EDFB2338952
-:10A3C00057C0F3A78CC361CD81DFB9D01F9D61B6A3
-:10A3D0001CD3CA2D63BCE38DAC6437E151C43BBED2
-:10A3E00065737E7D31C2E57217C1A5F8959999DA3A
-:10A3F00078CB40BC43AC635E682997A7063927E554
-:10A4000099C9CEEF11617EE6756650DC88C33DA424
-:10A41000303394AF90657452A07CB9409282ED6164
-:10A42000DD5788275B16CC423983693C381E787F1C
-:10A4300059F86C9DEAF3E273BA1230F3798479DE4D
-:10A44000216BCEC3FA267BAFCACFE7C10C32B0BDB9
-:10A450001C8F9793457943CDA91B6FF20E8E633005
-:10A460004732D9BD5631AFA34E47C804EF6D8EC8F1
-:10A4700051CA4F154F63BCE33B532884F9D977AADF
-:10A48000619A6F128B447A303E61071098288EF0E3
-:10A4900007E403F06E1A719E09CE5391BB18E6399A
-:10A4A000FA152CA71BF491C7B186F29E3D01B3416A
-:10A4B0000F0515E49BCC5AE37BBD7EB2B343741EFB
-:10A4C000488904B2CEA69F3F5E638CD35866701451
-:10A4D000F7DFC2EDDE8F13793B4917E9D95CFF3610
-:10A4E000BAAC8CF25D32EC76B4DB4F261FC12397F9
-:10A4F000A837DA506FD82D7E8287D41FABBB6E652C
-:10A50000889FC65DD50CE5E86F14BEFF19BA41A15E
-:10A510003C05796F436D117B1F5AB2A6EC1134CE06
-:10A52000FC7782373440B9E63D363E02F54AA6074D
-:10A530002AF17E96D6F1CCB71ECAAD09C1675FC2BB
-:10A54000F51C50A99F26712E963167FD4EE87FEBD2
-:10A5500075C37C9B704915FD1B310FA8FF3EE6C4F7
-:10A56000BC9141747A06D607F87F02CB30EFA6156E
-:10A57000C15FDC01F5B3DF633EAA23BEA32F82785F
-:10A5800053043DE0FBE9F0BE49D04D61B7C2F7EF9F
-:10A59000DD36CA9F600733895FE6DBF9384DDDE5BC
-:10A5A000D74E827915F64C24321E09F531BF093396
-:10A5B0000C787E1D237FD9587F24D6F752B48AE7C2
-:10A5C000D5E458E9FE2326E4DC6403BF5D16A57FCD
-:10A5D000FA5E22CA4D421FE9F804FB01FFDC5FC6A8
-:10A5E000B7F3A99D9BF3838FC93FCEB797B2E81FFE
-:10A5F000F65B111D87E4EF4CF16DFFA2D994D73DB6
-:10A60000D91CD98B7C7D9978968827F2B51DE0B846
-:10A61000D0DCBCDF03EB495BCB7C2D38CA626F2BEF
-:10A62000F657CA022AC2B9CC795F2BCE6FEAE20391
-:10A63000E9485F4F6617123D5D6EF715260089B435
-:10A640004EF1F99CF0AA76B14270995F6B0F63FEF0
-:10A65000DAFC81FB7A82050B806F160615718E3E3F
-:10A6600058B058138F95797D0B6CE047C7DA77CED9
-:10A67000E67A5CB66F12E74EE4F76DD90E9E5F99ED
-:10A680007D655336E557F07C67E0FBDBB22745E597
-:10A69000088C4BF928F398DF82EB9A27F856F2FDE5
-:10A6A0007CFFED64B7CE0FE8EDCFDF281CDFA145BE
-:10A6B0000AD9830B6BCF6D9FB664CBFDDE3C27C5FB
-:10A6C000B799D4479CAEA4DC9E8B7A1CE56D15E847
-:10A6D0006D8D7DBCF8CE3369D42EF3C9D56787471D
-:10A6E000CFB93419CEB9348A732E4DBB5A2C1948C0
-:10A6F000EFE29C4B53F7E71BB5F97D124E83CFB9C0
-:10A70000F4535EE3026B782F9EFF59B00AD608F52A
-:10A71000DF10E722DEC4731113A274947C5D4284BF
-:10A72000E7CDF9297F2FCF99E4C37C9336D304CAB0
-:10A73000176A4B49F669F37336B53457623D99276A
-:10A7400024CFB52C88B31FFC9C906B5B149EAF1577
-:10A750005A6427787B5476507B4EDF5318A03CB95F
-:10A76000A66C2F8DB345C41130AF74223CC3608EEC
-:10A77000717CF1F646F900FD6DC0FE2A0A7D941F3A
-:10A780005391CAF3CC3CE98192DB8AA2FDD674F3E3
-:10A79000BCBC9AC0D76FF1FCDAEA5284A7519E4B39
-:10A7A000FA32CA75A0BF7D488FDF99B8DE89CAF733
-:10A7B000C0A29BA0BFBEF7AD943FC7EEF62B1668B4
-:10A7C000F7E2BB4E1F9EA7DB501EA8AEA4EF663A71
-:10A7D000EF9751CB2236F85EFA9E751BE6EDD5B1A8
-:10A7E000762BF65767D05BAB1C6F5A913F576DB70E
-:10A7F00044E99161BEA1AF10055DC3CE41710F92D6
-:10A800003F522E19E9988DD4CB9F12296F412E709B
-:10A810007DB598EB39F6A482F19FBEE423AAF09FA0
-:10A8200049DE4D9242CA20E72775BF4DF6CA3490E3
-:10A830000FE89F29582EA6FA5406F93906F3472F38
-:10A840006389445F83EC0431AFD28179737B48CA5A
-:10A85000C5F2298CE17D06122F300ED1B3DCAF9BFF
-:10A8600084F7F0C0F33231EE9D267F5144413CB174
-:10A87000B0A910ED8820D93B46FBA7CCDE9C6487AD
-:10A88000F54D61ED241727EF7F93E424E0F92CCAFE
-:10A8900099D798C4B3CF8E72A61213FF547CEAF1F5
-:10A8A00034CBF19019E1342BCB888F9019E13ADB4E
-:10A8B0003B084F744EC01F074F7E2947985E8E1489
-:10A8C000B033FC5CF27D6FDD817EEFF9EC900F3DE3
-:10A8D000C1AC1C929F7A7B245E5E5D418EE382F266
-:10A8E000EAFA2CDC4FB894F5AEDCA90CA68B93FBEE
-:10A8F000D7AA591AFA9174B95BE4D92BAF8BBCDD96
-:10A90000D264D27351BDC8F15F264A97225D69F0C7
-:10A910007FC5AE84880AF45622DA5F8AF43021AA11
-:10A9200017232687D70AE36E547C6D6A0CBC67B880
-:10A93000BCA4FF269AFC2AD953CC978E7806BC4F2C
-:10A9400043784DB177B49A619E87ADBE9FA3BF5245
-:10A95000CEBC84F772837EA970D498913F2BEC46CD
-:10A96000FCFA09EF95CE41EF4DDF07EFC311EF522F
-:10A970007F0CC1FE04BC2FCC89B15F180FEFC1EF73
-:10A98000897723BE25DF7726382B1C18D7ADE3F94E
-:10A99000C413DF1FD98AE58CD50574CEA533CDF756
-:10A9A000067D6FE6DF4B7BFC2ADE9F58B806BE4370
-:10A9B000B9B3205081E5A6B50AC9CB491F055BB1E3
-:10A9C0003CF26EFEBD647DF31B780F595388B7DFF0
-:10A9D0007D7423DD2711DE28DA97B75760B9A98D7A
-:10A9E000B7FF2AD91E42FFBAEC60B815DF8F7D8011
-:10A9F000CF43DA75D3059D752A2FBC41EDDA79BBBB
-:10AA00009BDFB227927C1276DA34B1CEE98FF175F2
-:10AA1000BA7F7B559517E8F0A6FE9005E9E0B0A94E
-:10AA2000A18CE4651C7FAB5C69CFC3E72C900B8CD9
-:10AA3000F00DF43982E79B6E83211ECBE17686CC44
-:10AA4000D3C47CF16A0DBE1ECBE17127592FC3C55B
-:10AA5000785EF1A3C964B7CA3CD2C8CF98827100AE
-:10AA60005C23E9D73879A5B30A9B495FCE1A2EF348
-:10AA7000497BCDCB60DC92B37FB832967FFD8418E2
-:10AA8000F788C87F97EFEBC20526F43F3A9178E844
-:10AA90001EB3DAF7D12EE94C63BA7B423A0B78B990
-:10AAA000F3D19A1FB7E5017C4DCDE6100AFD7C85F8
-:10AAB000EE3DB9A68745525306CF7F96994578DE7D
-:10AAC000039FFFCA56EBB64D1A3B7DBE141B978FF2
-:10AAD000223D5223F024E5C57C812FE0EFDDC8DF65
-:10AAE0000BECCD64172E12F2FD1616A638C52D06F6
-:10AAF000FEAE777CF399C984F1303D1FAF86E970D3
-:10AB0000BDD0FFF82700FFBA47929DA8E75777E826
-:10AB1000EBD53DF2FE416E5FE9F9BC4EF27958CFBC
-:10AB2000E76038703EFFD938DA7F91E7FA12ECFD22
-:10AB30009F855874BD03FADDC07F0978CE6F0CFA8B
-:10AB40002D269E5F28CA72DC53ED5C0F87400F0BE9
-:10AB50003F8744EDA943B3C3480F25827F251F9744
-:10AB6000087D3E485F5719FD9887883F268A928462
-:10AB7000BBD4CFD00FE967796E10F4F2FB7EF2EF11
-:10AB8000C1FFC4798ED3F3CB2605E47341D45F01B2
-:10AB9000BC7D8D7803796CE7718A7686F22CAEDD08
-:10ABA000EF5813D3EE074947FB0083EDFD88CE8EA7
-:10ABB00037E22B9E5D3F80AF04B09792D08F67C481
-:10ABC0001FFF88CF21E475809C76E4C690D3D67DA4
-:10ABD000BC5EFFD6048A17C8F8B8E437258FDBD5EA
-:10ABE000EF66F95DB9B8FF20FA3F74EB2CDAAFFEDF
-:10ABF00086F969BF1AF38D7263E44BE07EF5064D6A
-:10AC00009CF4505AECB8F5F05CCEEF4B72F9BAC632
-:10AC10007BFC5E1CEF8895C7C58F248A670ADF57C7
-:10AC2000B83897C7B9978867B9781E1179D8475C43
-:10AC3000FA78BAAC5721C6F9729DDDBE412357BCE4
-:10AC40003FB335A3BEF2148ABCF5359C5EFB5E496A
-:10AC5000DBAABDAFED9ADCF22508474FA1DF9A8D44
-:10AC6000719657B85E6834F75A31BFE41A77702A84
-:10AC70007E6FF432FF0BD88FB7D73A0FE0DC27F6A0
-:10AC8000E9FB2CDCDFE84BE04F39AF6B72AB97E0B0
-:10AC90007AFB6EED25F93050AEEE25FEBF2637402B
-:10ACA000E3F6CD97DF45F9C7BCCC847F582EF882F8
-:10ACB000E2BC31E2BA83E3B8FAFB679AACB1F7972A
-:10ACC000595EB22E3E7B43378F1BDE68671B73E1F4
-:10ACD000FB92EE4CF21FEA5242A39D14C7FBEFC554
-:10ACE0005DFB86F5D0BA3695F7E73F5A4AFBB814B4
-:10ACF000F759DDFD36C9B9D5924FBAF47C522FF021
-:10AD00007BBEFD0F635C7C08FCB32616FFBC8CFA8F
-:10AD1000C91285FF6D220FA9526DA8C0B8D0A91520
-:10AD20008CCEBFDEF6AE4AF474DBB30ADD0721ED4C
-:10AD3000B3D502BEF1D683E707BC1AF981E707BC99
-:10AD40001AFF0CCF0F68CB787E405B1FCF0F68BF18
-:10AD5000E3F901ED773C3FA02D97B0E5AD18676BA7
-:10AD60006A63CEB0979F27D0B6C7F304DA329E2726
-:10AD7000D0B6C7F304DAF229C6E178EA3195E2F4F5
-:10AD800078AE40DBFEE677276621DD7425F03C32A5
-:10AD900016F2F714015C5608B8E079036D7FC753CB
-:10ADA000AE7C8701DDADE85939079F97EC5AA5EBDA
-:10ADB000AF5E6D203A64ED5CEE36C33F243FD52292
-:10ADC00015E7F1ED2E85A517E0FDE106FDD9BD796A
-:10ADD000238A9E5BC2FAF7F54C13AF2D181C977FA0
-:10ADE0003957E421E6B01C6D9C264A070E5F04D754
-:10ADF000FF91EA8B450725ECA2548ACFBCA362ECF5
-:10AE0000817DC59AB75CAE68E2F70678D8B2F4F4F3
-:10AE100090E0D5D343D2183D3D24FBF4F4903A455D
-:10AE20004F0F69FE71E7846F7A959E3E8CF09D020C
-:10AE3000FF207C27E0CD9018578275629CF72F0584
-:10AE4000DF2F72C5BE8780EFB7ECF20A87973ED737
-:10AE5000D8CBA2F649E93BCDB4496B8C7B4A384A42
-:10AE60003B41C62F2731EEA7DBF1BC6521DA01DCBF
-:10AE70007F43FD8F7C7ED8CAFD36A420949337B1E2
-:10AE800020C9A39B0CFAFF66C74356D4FF83D60B99
-:10AE90001617DE1B685C2FDA514C134F32EA7FA580
-:10AEA0005B892417E372BBA55C0E9E2563C7AF0CBC
-:10AEB000455EFCDEE1B7E579681C662FD3C57B6390
-:10AEC000DA73721E122E727C1B6B56B3909EC718DB
-:10AED000ED2FBDBF2CFD6BEA54138F96FEB1F44FDE
-:10AEE0008C7056871790DD35D129FDE29EEBF1BDC0
-:10AEF000F4878D7EE8F9F6A5E68594DE9F1744ED8C
-:10AF0000C92BC4739E8817C1B27EFB6FD0F872C57F
-:10AF10003B0CC79BBBFB220FD2CB46A59919E6770A
-:10AF2000F055E84735F5A7F3F84B50B75FF5B6D2C3
-:10AF30004BF35EC0FCF7E0B351C4D31ABBDEA67D71
-:10AF4000D4C62E1E2F60BBF47831DAFBAB5887B520
-:10AF500040196CEF37B01EEACF68DF0FA293F3E819
-:10AF6000F18E3C79DF16CF1760422ED50978C5F3F4
-:10AF70000BCC08E0A9D1FB3B811FE6E54D8AE6D169
-:10AF800066B8C08F51310FC36B8D9527C5F0721510
-:10AF9000B049973B6A484E2C6F1B1497B0123FB5CF
-:10AFA0009F7B7DD20EB81F7C377C96E67979DC20BA
-:10AFB00071CE3B7EFC5CDA93AF3DFFD164E5E70EDA
-:10AFC00059B3FE7CFEDA3C933C3FA50E65FD83E160
-:10AFD000FAFDF2F265FE01C0EF2E2DFCE43E825C2C
-:10AFE000CFEF27F53C89F1433579A61DFD5AAF2BEC
-:10AFF000D882F5871DEC3DACA03C7378293FE4E492
-:10B00000AEA31FA3FF2ED7C758EF16BCDFB66E97AF
-:10B010004AFE60DDAE37C82E8AEFEFB50FDCA32005
-:10B02000F6377E126B5E32AFB9522D4AEDD5D8E9B4
-:10B030004B851F307978E0216C57FA615E0ACED7D4
-:10B0400032A283EEC5EABF83DBC16E95CD44F881A1
-:10B05000DEE37ADF61A67D077752484D413B6E29DA
-:10B06000E3F7D0F99A7D482AEAB0228AD366DCA1B8
-:10B0700006D0FEFE74CDF2343CAF9C91BC22AD10E4
-:10B080009ED36DFC5E9A0CC514E0E74E97A5E13D9A
-:10B090002037D8F8BE7CC15F27450A81DF5EB7F252
-:10B0A000FB46DD4941BABFA03F4DA5F91C5B074BEC
-:10B0B0001B85FB1EDF4CC47B0772CE3826E07CB2BA
-:10B0C000C5BD163FCAE3F7DC1C7FF6BB89E8AFAA13
-:10B0D000671D74BE5DD29FBB30B6BFB242C0A3D164
-:10B0E000C3F3DE4F0AFBF190D86F9579F06BC43E45
-:10B0F000E0A1D103F78379302FA431C19FBA10E3C7
-:10B10000110754CA6BFFC6E94F4D23BB99E7B3AF94
-:10B1100011F6C34991F7B966F68C4CF42FE2E54B72
-:10B120001FC8E376EF0F755FA5CC3F8D0B873433D7
-:10B13000335F42F72E05CE55EFD53FAB31E1795A5B
-:10B140007C8F9737DF97A7E8F2E21B312F1E5EADA9
-:10B1500079A53C939D235FBA11EF23D7E4D7A09F35
-:10B1600086EB6BC4FBC8E99ED213744F07F683F7D6
-:10B17000869DEFDEC815621E8D984F9EAE7DCFF97D
-:10B1800039DABF9BBE3F2DE0F6F43BA6AA6D31E64F
-:10B1900099378CCBA7711E7300F7252F8EF07B3F5C
-:10B1A000E3D593E7B8E3CDAB6B46EF8D386FCCCFEB
-:10B1B0008C355ECA304E2772BE5DAEDE9501BE9FF5
-:10B1C00037BA3A595376F6E7CFD5C8D7D9023F5D9B
-:10B1D00057F5E6D37D00B3B9FF1A0FCF65E66605D4
-:10B1E000E190E00A06D11E91F715E37DC63CCF231E
-:10B1F000744E7C47E1ACEACE1F0C86B395BECBFE05
-:10B20000A4DC39FA884A72E7E807821F99DFA19423
-:10B21000A1BEE27C7594F1B8EED176FEFB1FCB8225
-:10B22000A02B407E2CDD5E3F070F1FAFDC3171236A
-:10B230008A7F7C7F37C89FA5598C4D83E7B20DFA72
-:10B24000FDB16FD903A4E7563C60D467012BCAD97E
-:10B25000950FE9EBD7B107BE46FBA0CE60F76608B5
-:10B26000BD6BB47F670C13F66F192BBB90734E8FB9
-:10B2700030FFEC61A4FFF97EDB24B19F6EACFFBC14
-:10B2800097D3C36D3BFE60C59F048AD7EF319017FB
-:10B2900023A1DF13EB9CF45C32CC5F330CDA350D69
-:10B2A0000B2EC471FA0E70389F6A38B592E2D2B58F
-:10B2B000DC0EB0E1252BF09FB6EBEDE447DF8BF71A
-:10B2C0008C019C6D366E5F48BB4A556F57F1275B0A
-:10B2D000A6FE6E451AAECFFDCCAC2AF43F3CCF247F
-:10B2E000F9111F9BCAFD2528BF37553B689F78ABD6
-:10B2F00089DF4368B7F1FDB9F0D353F7613878645B
-:10B30000C7E619E86738BBF746302ED166E2FBAFD7
-:10B310006DD398B8C79A8FD7D45DDD89F3CAAF01D2
-:10B32000790FFD6D2AF0973835FD33612F350A5CB2
-:10B33000F4BD76D14FF1DEAB9FBF43E62AAC730478
-:10B34000C5BFC6314E3732BF847E1B43132F3A012F
-:10B35000FA8769CE3F8FEB50229614BA5F8FE2D8FE
-:10B360000DEB2319D7A3FEFC25DFAF95F373BF9E2A
-:10B370003D03E3FD529F5E8FF96D18071676EF22AD
-:10B3800026FFF87E41ADA0EB45C2DEBD3E89C37904
-:10B3900019F3D1F9ABEBEC2C05E3CBD757744CA2E6
-:10B3A000FBAFEB2D6968AFC8B8773CBCC78BCF3417
-:10B3B0003E99CCEFCB51FA476327C73006521ACDDE
-:10B3C000B737F6B36398E0E7D1C24E1BC9FCB8CFDC
-:10B3D000D2B8E722CAC7B725F27D35906F76C4EBA5
-:10B3E0007ED4E7B0EE5B5E4D88F07DE3B0B81787A2
-:10B3F00085683F664F26ED2BB80BFDB4EF7ED2D2A9
-:10B400009B4FF200E49702BA73CFB04FAE31E3FD29
-:10B410002039604741F9F82F0E5F83BFCFD238A2A1
-:10B420007725DE179EFEF8595E1ED77B18CBC31E0C
-:10B430004FBC96CA137A57AA509EF278D6B5D41E3E
-:10B440001D2820ACCAC7875F8BE7FC8E89F825F3DF
-:10B45000F5D23D418DBB2F3269E38325F95C4E1F48
-:10B460004BE0F58E15B0257311DE637A476B7F379D
-:10B47000C1932FED526E97C975CA762C2B76FFEFCC
-:10B480000B3D708BB8DF677A126B4BE0FB1521B474
-:10B49000AFDEECBE88E0F2C2309780572FDDDB28AC
-:10B4A000FB319EEF97E3AE42BD8D72DDA23F4FF4BC
-:10B4B0001BA12F609C0D344E91BF04EFE5699C9B4E
-:10B4C000578278037C9905BECCDC0FDC4A78C67EB7
-:10B4D000D38A498F4CC43CB137CF40FD82E8BC8D44
-:10B4E000F471588C734B2BDF67EA4F2B243A9A9EEA
-:10B4F000C4ED3F560AF003393645C0AD245F9CE3E6
-:10B5000019C043A642FDB70AF8E5F1FA17BADED32F
-:10B510003FD07A3578F263DEF19BBBC6129EA60C53
-:10B52000D0C1665D3FC75A0CEDA6F0BC94465721CA
-:10B53000B5BB57DCB32FEF2DC67605D06E7A45FF2D
-:10B5400044E407796F1B0B4D2367BD41488B817B1A
-:10B55000D83A787E0A1BE9E7F711CD9D532AD6E742
-:10B5600014EB736AEFA51BE0C38FFAF36B34F75249
-:10B57000CBF703701FE8AF6882E84FC7CFB1FA433B
-:10B58000BE88878F71F97F617CC8791AE0390067BE
-:10B59000C3FC243C918FA95D919E9FE43C87E59B71
-:10B5A00084BF6DE0E782EF399EC8EF5FFD37221F51
-:10B5B000D2ABA7E7D55D0526DC3F95EDDA3A5A0216
-:10B5C00028E765BCDBD6551D42FDD7D45D4E799B7F
-:10B5D000AB7FF5ECCB2168BFEAF987533099F6A829
-:10B5E000B93D03EDDC861DF7A4F871BFC41C4A41C8
-:10B5F000F97934AC56C53A0F181278907654A3D026
-:10B6000037C79EBEFF1A84C77FECB038518F363DD6
-:10B61000658BD8280E720BD95150FE9C97EFFD1AFE
-:10B62000FDD2A65D7A3B69D53F3C9CE1257A0AE5CF
-:10B630009AF08C0B8BE43278366EB7F8226E1E4F80
-:10B6400084615813EBDF88F333B6C7799C06BC37A7
-:10B6500075A84BF13CAFF13B4812B2C39ABAEE2742
-:10B66000BBAB491B67003CD4C5B1BB6ECDD7E75B14
-:10B670004BB8B0B087EC9AD65FFEACF87307DEA784
-:10B68000F94F294A91565FAE27389DEA58FEF7BB1D
-:10B69000BDF1F5EA49B40B6CDA761CAFDE5D0AED5C
-:10B6A00049B06EFE6CB04452D0CF6FD86AF181E6DB
-:10B6B000650DCF3EF124EE87B04F6C74FF41FDB3B2
-:10B6C000FB3FBE14CAF59D16F71C3E7D879211C53F
-:10B6D0004F9397DB27121FAB5EDC4FF70CE27BB476
-:10B6E0006B255EEA3BF75AD9F8C1F0ABE8D82B7E60
-:10B6F00077C1809F8ECFAFA4FB3C7FF99D15E9FAFF
-:10B70000E81E8565160C6E5FB7757F0AD21FC209E9
-:10B71000FD4B89A701BC0DC257E49ADDA5548FE209
-:10B720001AF1F036379FF178D0AF9E7D0E7F07B0CB
-:10B73000EE37361FAEBFEEB9DB53701D5F999B39F4
-:10B740007DFFE29E0C3F8C5B67096538E9C9DFD756
-:10B750003D7E07D1DDCD07EEC8E0BFA7E1CF364D76
-:10B76000A17566E3FA6E7A6C3EAD6F250B12DDD5DE
-:10B77000FD82C727BE15BFC760C4E769C11F5F6DE3
-:10B78000B3E18F64B0AF30111DF3083F50459EEF19
-:10B79000AD4C7B8F0558DC54FE56C407DE1FD0032A
-:10B7A000CCCE3471D9A6EDF7F6207E8E0DF367E28C
-:10B7B000BE1AC02124E0A5E0FDBAEA81CA4C8E1F62
-:10B7C000E635CBB832D8DF15F81EEBF758FC09C5C3
-:10B7D000BA7662BF9E8F2FE31330EF44DCF7FB2A6B
-:10B7E00023F6B9ADD1C31521DF580FD3D2573C7E14
-:10B7F000DF7E1FD1D5371F71BE690C5757D1F71E99
-:10B800004B048F163786F7D628240F6CBAFB9F0699
-:10B81000E862BB45F0B3FE3BCCD3AC68E1BB87E745
-:10B82000D5AE7CC8A6BB0F214A37D6E8FB82287F5D
-:10B830004A3FEA66C1FFC6F51AE5C11F0CF2803D1A
-:10B84000E619D2BD320D96F0938F22FF02BFA29F60
-:10B85000D9F0AC85FCFCE33BDFF8F83AA0F3E31D3C
-:10B86000926FF572D5C8B7752F4C62B1F8F6B8C3B0
-:10B87000C762F22DBC8FC9B78EE83E8D97FD7072FE
-:10B88000F5E63872356FB8F11C4B512AE6BA1F7BCA
-:10B89000BA7E38C5050C7095FEAC515EBE9CEF8D2E
-:10B8A000292F195E41A581A3849FA4C755CFACA6BB
-:10B8B0007106E856D2A5A4DB01BA1C945FA983A344
-:10B8C000F1FB17288F2645F16E590F7E0ADAB1AFCA
-:10B8D000A9F43B287D30978D00F7BE9D05B40F7A03
-:10B8E0008FB0F3FB9CFD2918D7BB47F815FD184F07
-:10B8F0004C8DBEEF4F10790381FE94348D5DF47949
-:10B90000B79A82765C6F38F6EFC9CA7B2A7BE3FC74
-:10B91000DEAC3CBF54A93AF2D7629CB69DEF4FAE65
-:10B9200068599882F18CBEEE42FA3DA19BDE057FFC
-:10B9300017E6DB27E39A21BF39BB2C7ABFE9111642
-:10B94000A2FDCAE5DDF5B45F688C83AC74D4A4E2D3
-:10B950007EA0310E7233E641611EF263FAF7AB301E
-:10B960003E827832D05310E9297B303DAD1C2EF653
-:10B970005F4B58896EFF55C8B54AB5E8A7689FF474
-:10B9800081DF8EF120A616FD1AF5E9B7E8C723037B
-:10B99000843C44A7F5C12332CF8AE85AD29DD17F97
-:10B9A000373E4FBCF469199E076A78F9DF8A7F0E2B
-:10B9B000CF132F7F32FA552CFFEA5FF3FF8D0DAEC8
-:10B9C0005FB1E78FE4AFF4EDB1D17CFAF6BC9D7FB7
-:10B9D000179677DB7C38DFBEF536FE7BD07B92E9AD
-:10B9E000DEE9BE613CCED6FADA77C5BDA4A7361033
-:10B9F000DEFE6E38BF2FF654F77F7D86F7AB9EEAEA
-:10BA0000B67931EED0B42789FCF0A6DD09744F7CFD
-:10BA1000DF6BDF9569E345FFDDF5348AF3167DC9F9
-:10BA2000AC16F35BFAD2B8BFD6F4EAD4275A0AD0E0
-:10BA30002EDD4BF71657BCFEA762943F7D2F70BBDF
-:10BA400002FCF3C77113F117C3BB7F6A998AE78DB4
-:10BA500018F9D553BD7FBA36E48805170E873E80A6
-:10BA600003AE0BE042F775C78347D7707E0FFFFF29
-:10BA70003E787C4DFE4243F764E2A3285C14FEFB53
-:10BA800023DDC961BB42EBE7EFF77C578C76D2F13F
-:10BA90008E16D2FBE75BF787FF6BE9E0FBAE5B89B5
-:10BAA0000C65DDA7FED7AE9BD3FFDAE15C3F19F949
-:10BAB00060309DFFEAAFA9FC5CB28FE66BE0FFFF50
-:10BAC00007ABA359F3008000000000001F8B0800A3
-:10BAD00000000000000BCD3C0B7814D5B9FFECCC76
-:10BAE0003E926CC22604084260F2244A1E0B791072
-:10BAF0001EA99B842008E206A4A2222EF8E015923B
-:10BB000008B6C66ACD622202F5B6516CAF6DD16F30
-:10BB10004141DADA6B8A41B1025D10115AAAAB8257
-:10BB2000A246BA52AB50031B41052ABDDEFFFFCF30
-:10BB30004CB233243CFCAEDFD7E423C733E7CC3927
-:10BB4000FFFB75CE18498599ADB9004DDB4EE587F1
-:10BB5000B1056806280648526D00FD004E6CFDFADE
-:10BB600090944CAD5D853480BAED710045D8FE31BE
-:10BB70002600124064DBA9129F13E01BFAB912A041
-:10BB8000A3119718D6DD37B71D9B3F2CB917A7D443
-:10BB9000BCF041FEAFB1ED78E1BDEC97A9FFE2BB8F
-:10BBA000433EC0B6D606BE565C2F120F3337213C3B
-:10BBB0009144F000EE5FF7F2E8A796E1FE8BDB3EE2
-:10BBC0009F4DFBD76C1D0532F62BFFF4EFFC30CDFB
-:10BBD000DF2479C4F3F88003E1AADC7E463CDF7EF3
-:10BBE0002A1FB0FD6C93149413B0FF807D7E80D625
-:10BBF000ED05EF118477F17F22DE3B6CB7E278C36D
-:10BC00005095E1EBC67B870DF208DFBDB3697E641A
-:10BC10007BBCCB9E46F0FD7B0844E17F21BCBDFF91
-:10BC2000B1FC3E3FDE007E86DB2A7B1DE908DFC3D8
-:10BC3000100CA9D83E0830B1D5792E3C3FA6C16280
-:10BC40007A0F42D01F4006F123272F9C0209D4AE61
-:10BC5000FA5CCEA7F7A74D4C4338FCAAC5BD5EA53C
-:10BC60001916A6C38AC1EEC02A840B14EFFCB5D8FE
-:10BC7000B70EAD71AFE215EE042801F881435BAF5A
-:10BC8000FF948912AED7B40CE1C2759AFA595C4D93
-:10BC9000B88EA25A82F67C6E3FA2F6A1FE57EFA1A3
-:10BCA0007D15A70D82DABBDFE03F27603F47EBE35E
-:10BCB0007EB199517DFC17033B5D0AEE1FE35620D0
-:10BCC0008028D921EA7D9C7F93EA62BAC442C0EF02
-:10BCD000725E3A9D7E4F83FD7AA793993E3ADDCE00
-:10BCE000A1138083DE57E8BF08FFE45521D2430546
-:10BCF000147F58E0237D23113DDD290E5CCFDAE768
-:10BD00000EF72A899FAB4A89F69E85FE2C31D01703
-:10BD1000E9E789C9EFA673D47A8CBF99CE974A5FB9
-:10BD20009D2F31308DF91C33D8E90E20FC0FAA82EB
-:10BD3000EE0F22DD25A99BBE3ADDCC7CF093EC14FE
-:10BD400077D3BFBB1DE7FA64383312BE41E2FA2B4A
-:10BD500020A71ED7A992C785FDB8FE89D238B79D06
-:10BD6000F44582A03412DBF2FE15807874A4DA1454
-:10BD70006ACB3A11A72878AF3CED00250ABF72487C
-:10BD800034F43B52B3F9FD4AC740C37B1D034B1D3E
-:10BD9000F4BCCA956698FF464C423E14D07B1326ED
-:10BDA000D2F85529971BDE9B7AB863CD1C6CAF95F2
-:10BDB000C245241C1D7B675510BD26A9230CF3B674
-:10BDC000A059217DEEAC9203EB901ED552B07F3E80
-:10BDD000D26D72CE68237C128C273C6B2C285A388B
-:10BDE000EF1A77B961FCDAD2498675AB3DD5867E0C
-:10BDF0004DC357A0F40518DB70169442B4E3C15646
-:10BE0000C3FB857BB618E627EC03391EDB11FBD597
-:10BE1000266A0BDB434924BEB6BE0EBFA50F8A704F
-:10BE2000D85B89E840C991FA57A86D70203DF0F9B8
-:10BE3000A918D122BF58CEFD8762024D08EF294BC9
-:10BE4000C04774B85B0EE4501B3BE88E7C48073853
-:10BE50009AF2B0DC87E0075FA78A7230FA8B401352
-:10BE6000F5AF3CDB2AFBC80E6F94FDB602E2FB94F3
-:10BE7000B8BF92DD6D9580F85EE3B47802E4B792C6
-:10BE80005AF39746C9D7673F845BBCB9E7EAEB8BA7
-:10BE900059E596345CBF39C5D3B283EC66C587B328
-:10BEA000E5F473E7814BE90CEB7449A7F7BC4583D4
-:10BEB000511EE5F8F10EB2EBB19532E30557590387
-:10BEC000EB719DE516778CA6FCEC5F5D13AC6B49BE
-:10BED000AFD7A409FB10FB175025843FB6AF4FCE58
-:10BEE000A3F77E26C17AE8DEEFD652603CB2D22CB0
-:10BEF000420F1457BF9BF3E8FD787EBFA454D011C6
-:10BF0000A6580259B864C241F76E2BF657E7EC7792
-:10BF10009119689B72D82F235DDA0E86CA24D4A5A6
-:10BF2000010F979FCC14F3210BFB6D39E3E3F2D89B
-:10BF30008FE558C8CE2C41B347766647D93339E4EC
-:10BF400027965C7EC500E8C1BEE96DC26909D4C20E
-:10BF5000EEFE9A3495E14A50C2407A9D705AE171E2
-:10BF600068C8B690FDD1D74F98A5BEBB94E0D86302
-:10BF7000852CDA5EF12C223C565DD1AEAE623C04DB
-:10BF8000DE00E1142FA2FA4FF4932A315609A7DC00
-:10BF90001C7F2E1CFFDC589CA8221E7DCBDD896EE9
-:10BFA0006A7F8F441FC374F7131D7E4A7F2EA3DE62
-:10BFB000DAD0781CDF4836518C0701E57A954D1BA5
-:10BFC000279382FDBE9236EE5FEB1D4F7C958DF37D
-:10BFD0000BD2BBE67B1C29DDEB7BD7AE0D35F748DA
-:10BFE0004F3BFBE55513AC01BB7431748DBB005D59
-:10BFF00013045DCFA2F5C77DEE72887D3E96D421F5
-:10C00000246FAB2D68053200F6BB7CD7935CC7CAA2
-:10C01000C13C7A3E37C133A00CE5AFCDE619720FB3
-:10C02000D9956D31EE75F85EF59D9F3DDE407A3D08
-:10C03000F59F39CD24378A276E24EE53E7FA8AED2F
-:10C0400041959CDB87E29D2E3A923CE39E3FB5747E
-:10C05000F7C93E2474D3D59389E3ABA2E8EC709082
-:10C06000FD12FD47D3DABC4CA7DB1C4CA7A59A4EAA
-:10C070003527428B05F5E1A46BC3F7491E4E6EB41C
-:10C0800002C54D6D3448FE32C7C17A05C9E1946AD4
-:10C09000D483BC372D5E8ACBDA513E3C241FF5D9C0
-:10C0A00086F54E8E7B37290FDF3B99AC24117D1628
-:10C0B000866D4CB79B1508DAD15EB625DF5659CE92
-:10C0C000FAA1F278ABB6CE6B599EFBD2D8EF8C7743
-:10C0D0007D8278499E31F237C37BE71779D04F7460
-:10C0E000FB8874AE2334937A9783E6724780E2CC60
-:10C0F000BAD265B9E41F9624660F00C4A36EBCC40F
-:10C10000FEB6AEE10BA6BBBEBE725A06B56F777F18
-:10C110007C86CAF640513C2C0FCA691B8FD7349CD1
-:10C12000643B8EE0A491DE742C13F6AEC50AB754BE
-:10C13000635BF3BFF22DD538BF06430CF617B0D3BF
-:10C14000B624CA1E42EBE75D76BF0079B77ACA5BB8
-:10C15000B16467AB25D70C401C8EA6BBAA95D1D87D
-:10C160008F71CD90B0DFB6EE8C97FBA9AE1916ECAF
-:10C17000EF4ABB498C0F74FDDCE206F87CDD5DA262
-:10C180009FE63A40FD0FD31EA95606623F5EC8C126
-:10C190006FD26AABFDB9245F4EA6CB891571AC1F77
-:10C1A000BDD1795EC3CB06BA9C332E4BB778C96E2E
-:10C1B000CC1476F1D8CA416B391ECA0C65D39E5B8C
-:10C1C000D344FCDA1F79538AFF5E45BD77201D9268
-:10C1D00033C063C1F9C92FA23FA2F91F878610FDA2
-:10C1E000E6BD181394901F8B9F78C546FE68AEACD1
-:10C1F00066935EBD3FCCB793E4E3787C88FBF31A8B
-:10C20000B6335C29592E61A75D9DB95E94CFF9D0F4
-:10C2100062A3F1F9A01C26BF614161A6B866A173B3
-:10C22000978DE2B2854F5B0F87A3FCEA22081F229D
-:10C230003DAD79D67A381CE57F81DE8F92AFC3168B
-:10C240000187A2D163AE1C9A6D13701D20B816270A
-:10C25000617C2F93BB08F5F7715C5493C379494A0D
-:10C260002C90DC2DBFECFD7C5F0F7EB0B511FD3E48
-:10C27000AADCA6C62DDCAEC135C9EE0C50C23637DD
-:10C28000AE53ABD9E592D0611B44BD7F42A36B9FF7
-:10C290002D128FEBF6A27B3C5ED025D733C2827085
-:10C2A0002C9EB66F1CF145E7E79571D01A93C47CBC
-:10C2B000716B7C71135F74FA233D0B157C6FD7593A
-:10C2C0007C2FAD27B9D0E92FE06D8B15F6A27373E3
-:10C2D0000CC74D66F8E3D205BC3A1E43D3CF0FFF1F
-:10C2E000D0F4EF06FEA1E9428FCD78E87AAC3FD7D3
-:10C2F000F5D88CB70EF7A5CB59C8763172A6DB9965
-:10C300005AF0E5D0FABA5DD1E9ACC3A9D3AB8DF24E
-:10C31000A11EE0541A5E32E0A3842A28898071E9C4
-:10C32000E9C28EB54E02E283D2B095E75D2A3EBAED
-:10C33000BDED0D2FDDCE9AF1D3EDAD8EA76E7775E5
-:10C340007CCBD090B03DC4349EF2AC2B4FFB0C7133
-:10C3500070392C30C4C9958E3B0DFD2AD73D86F926
-:10C3600057A52C338C4F52571AC627E73C62E85F1B
-:10C37000E3FEA5298E5F6B8AE37F63181F170E719A
-:10C38000DCFD7AE344509047DF3BD2C9F177B0D16E
-:10C39000C5FD9D8D29DCEE6A5459BF7737E670BB29
-:10C3A000A7D1CDCFFFDC58CAEDBE460FB7A1462FAF
-:10C3B000B766BB30F5F9EB15CA574A432D9564CAE9
-:10C3C0007764F87E928EF47BC312688A473A8D6A4E
-:10C3D00017F139CC37FBE35387EE25BFEEB2B9C96D
-:10C3E0001F36EF182DA93DC47309E8EF3C51F292B6
-:10C3F00030250C1E8A7BD03DF7245F2DE916964729
-:10C4000032FB807A37D301D664D4B79933257713BA
-:10C41000F0733F24711BF4E1F85405FCE4FFAB9D7D
-:10C420004AD09EC0A0791D08E70C0126D8699CFC63
-:10C4300077725F85E2D6EBE821C22B7B64F81E3E63
-:10C440009F51FA97339437DFE86CB5929CDCB0E7E4
-:10C450008163F7E23834FB8B493FBAE206FFFB9673
-:10C460004B891B5A28AE443A462477C843F14EA262
-:10C47000E28ECE07F4F6B674910F4C6DF2CB0948FC
-:10C48000CFCE3781E3385D1F11BF1504BFAE17D57E
-:10C490002E25382C81FCFD239534BF66BFCA74D18C
-:10C4A000F542D7033D0FD4F5A04A7EB689E69F3802
-:10C4B000089C4F8FEAF01D799EF034C59DA59D2DF7
-:10C4C0009594975D286F1C73BAF5159AB7BDD1C7BF
-:10C4D00072B4B57126B7C1C6F99A7CD6737F57631B
-:10C4E00003F77737FAB9DDD3B84293CF161EDFD7FB
-:10C4F000F838F75F6F0C6872BA919F8FCF10FEF714
-:10C500008B50E50092BF17D3451D071CE59C478063
-:10C5100022DA8B95939A9497453C65920FB35CE829
-:10C52000F200683724A4D78DE867C93FDC04FEBC5D
-:10C5300039D8CE9CD7621D2B7D7BB958E86CE6F8C4
-:10C54000C36C0F174090EDDDB9F65DC4FF17B2EF75
-:10C5500032E6ABE4AF74FBB718C2BC9E5DBED34DF0
-:10C56000F594EFCEAFB834BF0273687E57DE1DDBA3
-:10C570003E5BB65C38EF2E1A2CF8AAE7DD183F02B6
-:10C58000F9E54840E6B87A7E5A4B02E7DDA59D09F9
-:10C5900014072CD826333F30CF540622DFE6697CBF
-:10C5A000EB80E03BC49779E3E6715D6EFE1A233EB3
-:10C5B0000B9DD7F509AA3DC6693DE2590B0F7F4E89
-:10C5C000F5B95A8D5EFC1CE16968BF61D2AEA879ED
-:10C5D0003119F1C99FC49142C128A207C2EF0E923E
-:10C5E0009EED9759CF7A938BE3989F909C9F6A9C7E
-:10C5F000396917CAFDF1B38D9C7F25653CF2887FB0
-:10C60000DC77C7AFB559DEA1199C0F856DA43F3A01
-:10C61000FF96938D44B8975738029468478A5D0A0D
-:10C62000ED1F913C723CF1E323702F43FA956F7D2F
-:10C63000ED20E947B9C3C9E708884447343F47EFCD
-:10C64000F7353971DEA87D1E99C2F7E25DE1269AC1
-:10C65000A6FB1BDDFF8CEDE8947D5C17C8643D02F2
-:10C66000CC25BEC9B8783D32E79B4D946FA2413AC4
-:10C67000E99CC0F09E0C829B9E77D7B544BD69ECC7
-:10C68000598F9C80F02DD7F2C3D11F7B198E6A87FA
-:10C69000CA7268D7F2497B8A053C517474D97C1BF5
-:10C6A000A9FE097F8CE13AAF19BEC919C28EAB4908
-:10C6B000DEC94C5FA79A4D794395DCB1E1D7240FD1
-:10C6C0006D716E3BBE67B6B7BA7DEB2D6EAF739DD5
-:10C6D000EC318ED4DB3A8B38371859A91652FE4705
-:10C6E000F125E5857A9E689EEFCBAA989DD18FEBC8
-:10C6F000AB210FC1E5B29C574EEB1A3E3F6F9EA691
-:10C70000EF5FB7ADD83537AA0EB226433F5F505C16
-:10C710009F38BAF976B1FC2DEB9C69F03FFFE9F147
-:10C72000DA540C7324D4A13C2920E20810F1C42C63
-:10C7300008713B1B3AB9F5A124513B17DCDCDE063E
-:10C740005E6EBFCEF4AD26B989583BFB931E1F7BAE
-:10C75000E1EB5C928B63DF1BEB4A53BBFDABEE6FEF
-:10C760002FD5AFC6D2F9520FF2B041935BDD6EF711
-:10C77000CA1F93DD8E8C40FB807046368B73B148A8
-:10C780007C6C80CE0174FB007E63BCA8DB8BC2593D
-:10C79000EE37B85EB84FE6BAA5D97E5429228F0786
-:10C7A000C59D43F5517DFF260BCC2739DB88ED1F56
-:10C7B000108F3EB3C28A1A85CF760D8FF21BC60347
-:10C7C000E52F535D223F9CEA80E4D364DBCE9ECC10
-:10C7D0009D8186602AC5A328CFA3923C7F227AFB45
-:10C7E0001F1A97C8E70F647F8622FF3E12E736B014
-:10C7F000400A64213DB6B4897EDEED898CDF4D10A0
-:10C80000643EDE0C612BE17F0B00DBDD39A0727B27
-:10C810002B78989FB8725C3EDAA1DBDB9491AB1069
-:10C82000CF82A4CE74D2CFBCD1EF254908573EC5E4
-:10C83000BF4EAECDACA03845C7C39229F0B82CD3BB
-:10C84000F336C15790145AB59AE2C2CD16A0B8F08B
-:10C85000D3D1F7DC01517EB524ABE220CD7B4E1263
-:10C86000E785FE6D76515783CEFEDEA878FCEBCCD3
-:10C87000CA43A4F7FF20D838FF5DC5E748D52E414D
-:10C880007B18DF8F6980EF0DF1E6F5A49F7EB68FF0
-:10C8900005444B5127F44329EFCBFDAF9EFAA2BAD2
-:10C8A00059E0E3A778AC24CB17A1FD0A6C680A090C
-:10C8B000FE27EC81751C37D50FA1FAC5BC27ED16F4
-:10C8C000F2E3EFA11DA673D30F1A1DDC7E88F90DCC
-:10C8D000B57FC3FC86DA8F30BFA1F6EF98DF507BBF
-:10C8E000FBE9112844003FCCF4FC6FC679F0E8DD89
-:10C8F000CE083C2212CCECE9BCEF5486C83FF2DBF8
-:10C900003E7E208EE4608BEC2639CDDBAC701DE2E0
-:10C91000F8D65101392D9AAEBEB84C84237FCBDBBB
-:10C920008F8E2DA2F7149784F38F6F39D99FF3263A
-:10C93000137C5DF4D86613F4D0E07D2E31B48ADE2A
-:10C940007F6E733A41887604841C123F7BA8A30152
-:10C950002C633EBE9E21E2A76BED9D45D1E79B4037
-:10C960002103D52B353F53259F4D08E76A75DBD151
-:10C9700024D7996FD07EFE3D420F91AF86BA44A571
-:10C9800026877A9BB7CDE6257D7A6EDB3BD32623BF
-:10C990001DA68E99542CABDDF30B33FBF1BE79A3AE
-:10C9A000CFFC6A7532CFE7738B1B606D950BE7DDAB
-:10C9B000E4D8F12A91E066D7475589D8BF2545DAF2
-:10C9C0004DED1C356D4212D90108F03EB7E694EFEB
-:10C9D00026119BE2AEB6915F2E27A58AB2BB958E3B
-:10C9E000383A49EDEA57B9FA1AFA57A50C32CC9FF2
-:10C9F000A46618C627E70C378CEBFB4E71171AE6B6
-:10CA000091BE52DC8C7830DF61BDCCE732799BBFC0
-:10CA1000787F11E37F4311E11F41FAD930B03852DA
-:10CA2000BAF217ABC96C6CDE99C0E7B4A6F8B4666D
-:10CA3000DB53BB3D6AEFF1E997B0B5C7B8AEB69727
-:10CA4000B8EE62E353B41F8F92FD2878E13A3E7747
-:10CA50007F6EF499CB54C4CB9789712BD93D53DCAD
-:10CA60001AD1E256B3FC74C9A9A40AB9D92B03C5DB
-:10CA7000417AFC6A961F800734FF2FDA4BD5F3A961
-:10CA80006F097FF50FD2F7BED172ADB5A67A44819A
-:10CA90000DFD0AD509FF2AC33A7A7016E1D0E99F45
-:10CAA000D12DF770DBDA570716F1737F3C6E59AB67
-:10CAB000D5277E95A99DF3D7EC78756072F738DCA1
-:10CAC000F591613EDC27ED36F49BD38CFD87CB7767
-:10CAD00047BFDF9B1D9AB7E64E9B8FEAD28F893AFC
-:10CAE000A5795C87A76A678C87ECA5B2D5CEF9508B
-:10CAF000ADCBC3F513A597FA896E176E90A1BE272B
-:10CB0000FBB65E5B77CACE1890BFC5BAEFA1AC107A
-:10CB10003CFE17859F79AF8F07BC51FBB4668AB87E
-:10CB2000EF5862CB8FBFC279C75E023791FE58A221
-:10CB3000B0B7F96D9F5A2CE4276285BCE4BBC2965E
-:10CB400024BAEF323FCE4FE7C9750BE2FD746E5445
-:10CB500090DEF98E0359BFE569DFA30E94BBF72D74
-:10CB60001683DF8990ADC3FE8E4CDF34F23B9377A2
-:10CB7000C6042DDF029F1D9920FC5A85D0F7D924C9
-:10CB800037FAB9189A9ABA07C1704E46F853FFCCD3
-:10CB9000D3B7BEF518C5BD7B85FEE3B0D39C8FDE51
-:10CBA00014958FC21AA1BF0EFCA53867E1AE161B03
-:10CBB000E549DF95DEB7673ABBF57BD8B9FAACEB50
-:10CBC0007BDD01A1EF27B67EF916D9F513E8EFA2B8
-:10CBD000F5BDCB2F6A7A5EF7B8CCFAA83F3FBE55B9
-:10CBE0009E18E881BEAF697200AE6CC3B9D992B22B
-:10CBF00053D3C8AF2DD9A6F079606FFEBA6E85F118
-:10CC00009CECB9EDF6F9E21C59E011D1FDE9B62F23
-:10CC100093CA7345BB8CCF6B5B34BB23E218F4A380
-:10CC2000D664F2A3D512D7DF0E6C1BC0F7330E48C3
-:10CC3000105447F212D739906FD3C572F4DC49F122
-:10CC400018A4E428B4CF348D9FD3B5BAD08C6D33FB
-:10CC5000B2885FEFB4CD3DE021F4B232587EAE072A
-:10CC60003FC7830712BDA9744F616A9390EF038990
-:10CC70009D1D54473A501627D17914AEDF1C1DEF85
-:10CC80001DB07A53EB192FFD7CF20AF99BB84BC803
-:10CC900083357B88FCF44B229F63F957063ECC72A8
-:10CCA000B50002BB3DB86FAD3BC871E9221079BD3C
-:10CCB000399EAF1DF7998DFC8239FF2CDFB2E3203E
-:10CCC0009D7B9C538730C9EB85EA0EE6BCB7B7FA6B
-:10CCD000C1A8246F615654DDCF1C9F77C5A17A1C73
-:10CCE000B53E8ECF855E29FBEFE38BB07FD7FA3858
-:10CCF00017E5D9479FB4FBC92E1F5D670F48387EE3
-:10CD000034A9B39DF28EA39BF2DCB802CCB3A8BFCA
-:10CD10007B96FCFA6FAD2C1700C67B0D4BCAEEE676
-:10CD2000FB7F4BD6C74B740F0752C4B89EF3C9CFD5
-:10CD3000C4735CB0E0F9817CCEA9FB17D20F3A979F
-:10CD40003EF2448C8782FCA37BA6F7A17A5F87E53D
-:10CD50000F7C9E0FF27D87E8BC7ED186F891143F50
-:10CD6000402E30DFE6AFBB9CCF377FAEF86610FEBB
-:10CD700095CF5C3380EE952D78BB1F103E91ADCFE3
-:10CD8000F3F95F779CDE737C77626B461FC8EDA674
-:10CD9000935E075CF1F4322FF1BD5852C5390DD4C2
-:10CDA0007B06915C6CA9065A77A42CEE8D76AE8C2E
-:10CDB000E3B8D42C773559220EACD1EB0D7DC1915F
-:10CDC00042FAE303A64364E5F075741ED69C95A46D
-:10CDD000F9E9CEEC6951F712ABE4F6DA97493ED7A0
-:10CDE000D8B90ED211D3F33958435622CF9FE7302A
-:10CDF0009E9BD7369C31F67331BFC3F74736A98562
-:10CE00007762BB54A3FFEA54EFBD59F8FEC2D64780
-:10CE10005ED8C77459F3C3F769DF3D4E517FD927F8
-:10CE2000E8678EFFE739449D03602DEFAF3FFFF4C5
-:10CE30008977F97CF5D3CDC3B3C5B971E8935FA702
-:10CE4000F179F1A17BB1DDB4E72DE68B19DE73CE6C
-:10CE5000FD2489F1AD213CFAD2F9AEF71182131904
-:10CE6000C179DBDC55794C3FFDFC2D72B4E7FC4405
-:10CE700087535F5F874F5F5F9FF76496C863666BFA
-:10CE8000F9C1315BE8389FA3BF305CA2FA5ED7F3EB
-:10CE9000A4507E6294BC7C57F5F41BB57AC841CB94
-:10CEA000B21FD8E89E5CEB6AAB2FDAEE5D621DBD67
-:10CEB0002B0EF480EAEA2F5C09FB2D444EE94FE784
-:10CEC0007D5A9F9401FBE334F0248287EE0D6A2D96
-:10CED0002CF4A5709D9CD693E91A6280FB4DE56EFB
-:10CEE00095DA2B25AF22EE7D0558FE2740FD60C266
-:10CEF000C3E208F3B9987ECF6546E2F26BD270BF09
-:10CF0000E67EB09CE29866ABD00BFF9C38CEDF7417
-:10CF10003AE97E065CB906FFD2EC0255C175662A75
-:10CF2000B0C29A24E60D453A1FD833F7558A13DE6E
-:10CF300055EAFBD1BEEF391FCB932C14DF05E22954
-:10CF4000477CFFADDF16FF15E77E009E3227CACF74
-:10CF500075AF39D8EE9BEB11B7838FFBF3206CFDD7
-:10CF600002DFFBDBE87FADDF09DD78FD6DCC579B91
-:10CF7000293FB829F181627A5FBF8769BEEF77D414
-:10CF8000E5E47B81E67B7FD782EF33B25BA72CBEE3
-:10CF90005A51FFA81F45FE3792680309E747FA690F
-:10CFA000F438064C8F88557BFF7395FB459523B964
-:10CFB0001E09A754B6C7634DFEA668B845E461DFF5
-:10CFC00088F9659D8AC1DF141568759BAF558E4B36
-:10CFD000AF3CAD9CD71F3D942DEC59515F4B7D4F1D
-:10CFE000F1A19A2DF4A70982B2C047C40963BBE43A
-:10CFF000CA2313FF6AB57E2DF93394A74882C34F25
-:10D00000171DC76E15F2355609EEA016AD2B34501C
-:10D010005CB105FD9D0E079D11A60C673918A3CBC9
-:10D0200027AE350BE72D97EA396F71503C83ED2A17
-:10D0300029C4707C0F3AB9F5687EBC02DCDC8E072F
-:10D040002FB7289FDC4E84166EAF86566EA74048D9
-:10D05000F8FD2B824DECCFE03E179F5B4C9A67A109
-:10D0600078A3E8FA9EF3850A8D4EBDD30115AEE490
-:10D07000D2E9300150EF327AA0C7E01CB61F667AC1
-:10D0800098F5B30CC232EB2719860CAA13A8ACA7EB
-:10D0900095E0E17ED545D2A134EC53B84E63A64766
-:10D0A00065CF723159A3C7BFB281E543E7D3FDD93C
-:10D0B0002A3FD7F9857A9542F26FE6A3FEBC28AEE7
-:10D0C000E2245D4DBF237BF874BA57555458B19490
-:10D0D0004CF2DD1BC64CA77B5545632B9EA723CF87
-:10D0E0007BB2C7897E4145A1D58D598B54367D3C95
-:10D0F000CEF769F79261A688AFEFD2E216DFB21FD2
-:10D10000B85DA827BE54A79BF07360704FF759E431
-:10D110000C713E38646270A715E71D527C73B2290A
-:10D120003E70041354A4FB5DCBAAF8DEDA4336311B
-:10D13000DF6E1775581D2F7CEE8FC1FEA64DC3976D
-:10D140004AE9BDEF8FEBD6D2BABE65597ED257DF22
-:10D1500066C92D3859316026EA6747C80A540FD589
-:10D16000F7C94EF52DCDE673DD6CAE930DD2E29985
-:10D170008E4DC387135FEECFD6EE6125A71512DD66
-:10D1800096A57AEFA7F99178215FF76B7CE8ADDD82
-:10D1900090EDB92FBBF8DCE7917F2000F8FECFB20D
-:10D1A0007D0FD07A757167D9BF1F1FF1F6F2705AE3
-:10D1B000B79C4AC8A459887793070236F603DA7DEC
-:10D1C00075EDBC2A723BAE837428F2FA9AC8A48D1E
-:10D1D0009AD55942F613D7FD2F5ED7161E3202DFBD
-:10D1E0007B6CFA219B90B3C142CE343BB46DFBDE25
-:10D1F0007B0789AE17A2F4AA6EFB99AF3E40FAD521
-:10D200009D70BA697AB73EFD7229E793E034D80D74
-:10D210005DCFC66CB1735C3D76EBE5B7D3BCB2B7FE
-:10D22000DB3308AF2BDBC37C0E16D9F6EE2001876B
-:10D230009E6F9C92BE8DDFA5735ACEE3368B73DA58
-:10D240002552FD2BF1D4FFBDE4F623FC9F6A7E43FB
-:10D25000CF8BE76B782DDEBB7E39D545E6AFB97550
-:10D260000ADFE30988BC41C55FD2FF2F611F9F8F92
-:10D270002FDA68CE273A6DC4FFC5ADA6FB40940FE8
-:10D28000D3BD8768FBDE433EBC3D5B3BA74D855469
-:10D29000C6439ED5C7D783BD33E7BB8F83E755967B
-:10D2A0004FF0CAB47FB1D2733DE1B9EEEF69581FB8
-:10D2B000E6697B139D9C9CEFDAC47DE12796BA5DFD
-:10D2C000D4D7F4732DCA4A29C5D19DBF64F9D7DFDD
-:10D2D000D3F575C10A712F1BD6F465992BD860F769
-:10D2E000105F0B360CE0FC02F3208EFBD66EB0AF65
-:10D2F000A07ED383B17EB980EAC99D97515DA529EF
-:10D30000467CE744EE91EE8916A48B3AC719DDAE50
-:10D310006B7E5DBF6FDB95FFC467F3BDE6AEF1B01A
-:10D3200062C8379AB4F8B988E0A338B0DE2AF2A709
-:10D330001801FF8E37BF1F4771EC66C51B4775E9A3
-:10D3400013FBD3FB400F74D3DB62742F709E73C644
-:10D35000E277A7649C8F5F458F6BF7D335F9FC6349
-:10D36000A307FE6EEDE6878E5795FC6CA58DEA1C33
-:10D37000B7818BEA1E4BF63ED544DFDB2C59095CA6
-:10D380005138417F285F3862E173F0317B0B53489D
-:10D390001EDB347B47E7C26A945C95505108E7175F
-:10D3A0000F86007D7F14A3C6821A9517C7E524193E
-:10D3B000FAF1EECB0CEFF7294D378C83DF13CA2D32
-:10D3C000E98E5F133D5718E63F943081BFC7290BA4
-:10D3D000DDC175A5BE13471AC6ED28D774CF01BEAF
-:10D3E00010F14F29FEB25F857A99E01C1B06F815F3
-:10D3F000CADD980E637C541A6EE13C3066BF62C889
-:10D40000EBED17A8335D3E4CD3ABC13058D8073392
-:10D41000BD8DF72196EC95398E5B928A81675AEF24
-:10D42000F4D6F54FA77B3FAF91EE03661AE93CD0E7
-:10D4300067A4F3A0F9463AA7D61BE93CB4C148D784
-:10D4400034BF918E192BC618E667B55418FAC31E5F
-:10D45000BFDA30FFF2C034437FF8C61B0DF3F35A36
-:10D46000E71AC60BB62C3C2FDF47049718C6CD7CB5
-:10D470002FDCF323931C2A4CE762EDFB2C9DFF7EEF
-:10D48000FC25FE8F056F9FA044E5407F13E9E3FF75
-:10D4900017FF170CD3CE1174FE5FA45DBD4AF3C312
-:10D4A000E6EFBCA6C6097BF3FA9E13FB3DD87F438B
-:10D4B0002DB4A650DCA4C5075EFD3CC294F7E97903
-:10D4C000CAB5A592E99C3EC6704E7FA17B6DC5A1F1
-:10D4D000A0A13F62BFF83E6AE441F72BD4167FEC6F
-:10D4E00091A3BF871AFD05BBE573F24EFD7E9C9E9E
-:10D4F0003741F3939C87CED2E127252839B7BEA8C0
-:10D50000E7A7E6BC55CF57CFFDDE4AC42577CBBD94
-:10D51000E5B1227FD5F3D6EF8387BF2BBB6AB06F0F
-:10D52000ED30B4FFB2A5B32F8DEBF92C1196CE8D53
-:10D53000234458FE6EE69DE99E5CFE1E95EBDE0BD5
-:10D54000A5B7A7D33D7F04DF152E11E51FFA796932
-:10D5500098EF77B4DE61C9B5BC10DF7D7DCC674341
-:10D5600068BDFF1926E237BB8C1442FF3360960773
-:10D57000E8F9A824CF7334DF7C3FDBDC9AEF0DB5EC
-:10D580003506B9555C6EBEB763AE0F862D2AC79DB2
-:10D59000FE1F497C4FE733026E7477BC726285953B
-:10D5A000E315D0F2F19B35FAEB758B591A3E877172
-:10D5B00089F9E87F6FDEF21AF365514A8756EFA8C2
-:10D5C000E7F8FAD6C1CE917C0FCD53E816752EBD83
-:10D5D0008E31E892BE2FB910FE8B528E1AEA48F0B7
-:10D5E0006CDF8B3ADFEEC65BAC7F78A5A8471E5E8A
-:10D5F00099CAF5EFEEF58F733DE9E6FA370D7A71CA
-:10D600004BC37B063D98E3FFC8301E4EEEB452FD7F
-:10D6100030FCC2C0093721FD8E6DB6F3F7D0280764
-:10D620001DC4577DFDF0CAE1E3F9BBCA0BE2F9194D
-:10D63000C3D1DE1862FEEA781E6A3CC8FD706398AA
-:10D640005B339E7A9D426F6D3B2187EEE7774AB14F
-:10D650006EAA0B9BEB17775BD44F480F1ECA49D7B6
-:10D66000E2B5FA022FF34FD42BDAB5EF4BDBB5EF6F
-:10D670004BDBB5EF45DBB5EF43DBB5EF402356E7BA
-:10D680000AAA6BB44BE2DECF2CC9F3E41CDC2F6D8D
-:10D69000B0CF994371FFC2CE7C05F7A92B08CF9676
-:10D6A00090CF79FD7C7DE8B984E9C240FE9EC8CF69
-:10D6B000F7C38E58FCF9F4FDCDE48D59D7511E788F
-:10D6C00024D67F9C2291CA9CB4EB28EF3B62137A4C
-:10D6D000387D63EC75A4771FE362849FFF2549D4EE
-:10D6E000959C611B7D3F3535D93728A758DCFBE277
-:10D6F000EF66F039C9A55EE78C58451C18D1E2C128
-:10D70000F41C710E989123E256BD2D239EE3F3E99C
-:10D71000D4B27E3E9CCDDF9BACB103C5AFB83F7F9A
-:10D720005FA3DF33317F7F33F24F76FE4E42AF8708
-:10D7300096E4A4F13AF45D0EE965F24FE2D86E4149
-:10D74000383484BEE3E98277BFF8AEF218D591A3EE
-:10D75000EACF2539A20E03B781E13BA0C57B0F1F9D
-:10D76000A23CEBFD61BE3144D7B916B584F8BA3896
-:10D770006107D7BBA6E4A8BC2FC2CBF8A2FD6926DF
-:10D780003E2D7684B93E76A17A786FF81FBB3DF4C2
-:10D790008B5CAEFFAAF9FC1D9EB62FC23185E8AFA7
-:10D7A000E3ADC3D1BDCEF9E55FAFEBEAFD4F9F78A6
-:10D7B000285BABCBDFE2EDC19FDEAAD1A5DDDA733A
-:10D7C0001DFD7E8DBFE7F0671800D5EDEDB1E823B4
-:10D7D000B0ADD7E874EC06C487EB139E11C4DFC567
-:10D7E000D39CFCFDB9BE3EAEE3FBC379F6599DEA7E
-:10D7F0005D48F82FAC1775777D3C2209BEFA578A31
-:10D800003AE8E2EDEF1DA2FF0FC28267F20A39BFCC
-:10D81000D7DE37D319E9CBDF45CD95C5B915D2F79A
-:10D820006EE2B3B9DEFE6DE91A4915E7AB91B56753
-:10D8300086D03DB2C5746F8DBE0FD3EA57D066ACAB
-:10D840004B21BDFC54AF38F73C0AF85CCBAEF91164
-:10D85000BBFEFE60C5F0FE31A7F7A7449F1734BB9F
-:10D8600081F30316DCBF4DCF934D7594B690A87726
-:10D87000B6A5D8384EA67887FC931EEFDCF5A6A88F
-:10D8800077DE9526E268828FF82B1DDCCD714297FA
-:10D89000FF97DC2AD1CF69F505687FF02D65FF255C
-:10D8A0000F45FED2F9C59FAFD6EA01C21F166BFE27
-:10D8B000AF98D6A10027B70FFBC5226D5F8C1FB9AB
-:10D8C000EE361A7C4D0218AD6EB672B7A18EF07F9F
-:10D8D000947817F25045000000000000000000009E
-:10D8E0001F8B080000000000000BFB51CFC0F003AD
-:10D8F0000917B1A1F26FA0F1533951F9BF5951F98C
-:10D9000097D0F884B02E1303C30A46D2F420E39DC7
-:10D9100040FD0780F838109F6322DF1C103E2CCC9E
-:10D92000C0F04D8C81610E906E03D2E781F83B1000
-:10D93000DF05F2C5441818548178A12803430C90E0
-:10D940005E0EC44522107D4780749D2879766AF268
-:10D9500050E6E6514C195E2D8DCA2F5701A647554A
-:10D960000686B76A10FE622479267506860A1508AF
-:10D97000DB408E81A10BA866B63476730D81F2DD93
-:10D9800040792175081F00B5882CEC680300000061
-:10D9900000000000000000001F8B080000000000D5
-:10D9A000000BCD7D097855D5B5F03EC39D879C24ED
-:10D9B000377033C9490C1835C04D0C838878120371
-:10D9C000064DF106D1C6FEB45ED0DA481922F26ADD
-:10D9D000B4B6B94012C2A441B4A568E98D554B79DB
-:10D9E000B646C53EDAA7F482F8446B6BB4D4E1695D
-:10D9F000FF469EB5D65FF9E280536DF9D75A7B9FFB
-:10DA0000E49C939B04B5EF7D0F87C33E670F6BAF1C
-:10DA1000BDE6BDF6BE6ED9C5D804C64EE09FF3186C
-:10DA2000BB5A628CE50D3D9937D6C4228C356B6E9E
-:10DA30007D530963DF546287F56A783F5E8EDDA30C
-:10DA4000E3FB49752CCC9882F5F3198BE1FFA0DD3F
-:10DA5000FAE0BA718920BC531667E1D3ECDF7C365B
-:10DA6000AB8C6955F87DCBA44CDFCD274BB906FABA
-:10DA7000BD8CFE9C2865ACF59597261F32CBF05FD8
-:10DA8000010B455E0FC05F66B0192714C6DE0D2E70
-:10DA9000CC4AB391FB7BB3ADFB4C7522631FB6BD83
-:10DAA00038F9D0C4E1DFBFA9B096DE8AE1EF673074
-:10DAB00018741AE223E98E4F1E9AF7E03C8380A483
-:10DAC000B3A13D63694F0E3C776F3B532D1F82D34B
-:10DAD000390FC6921CBF9FB39D27529B2E8052A523
-:10DAE00094984D70A9F0CF74C6A82AACCBB2DD8D46
-:10DAF0008CE072C0DB11F9E7C03BE27A897AEF066D
-:10DB0000D7753268B7DEC5E9A53D4F8EAD63C3E971
-:10DB1000C55C0F138F27BB1E37301F8D63D251B3E7
-:10DB2000BC78D4751F8B8EAE443A3AF3BF9F8E9269
-:10DB3000FF7BE9A883FAF95F46478C75737CB17E59
-:10DB400015C71F7ACF9F91C5BD12D21914FB10EED5
-:10DB5000623E142B6EEDBC569E02628AC59E3C0D41
-:10DB6000E45671FF9206847BFC2BF3FF8ACFCE45EF
-:10DB7000B5F573617EF94DBDCF5E00CF483C2525DC
-:10DB800060BDB63319850AF4B73C5903F36BC7CEB1
-:10DB90006631766F728991C4F93283B1718CFD8BD5
-:10DBA000981363B2AE4239447FCD340F374B737C48
-:10DBB00048273CC3DB8F34FF10B633EB94E0FF57AC
-:10DBC000339CDF58EDD81A3E5E12FE417C170E8D55
-:10DBD0004FFDE4375BCA0CF163FFDE877F21FC5EFB
-:10DBE000FB3F325E01ABF2A17C0835C85A0AEBB3A9
-:10DBF000DE6C15CA91E52A4B838C28A8EE965CFA58
-:10DC0000D8EBD2C9587D2F5F1FA9313404DF9F990B
-:10DC100044F473CA8DAFF56C00923BBE381823FAFA
-:10DC2000D018CBCD193E9FDBDB90902DE545B5524A
-:10DC300082C68B3D5906ED938BB8DEDBDEB030DB60
-:10DC40002AAF3C9224F0E6A40FA6ABD391AD387D69
-:10DC5000A80DB2E19BF2C5E943FD9CF491B7C6D291
-:10DC60008E7DF6F58A9876C149D2C7171DCF5CD74D
-:10DC7000E17CB556AC6B998F01DFDE5ABF30A39DB6
-:10DC800031F2BA5611BF471A9891CAD02E7F703D13
-:10DC900093C39FB03ECAE0F25E675B2F65FCF4A6BB
-:10DCA0009E51F0A144ECF335FBF5B52AFA6BB9505F
-:10DCB000543519FB73637F40671BA3B72619F0C364
-:10DCC00071A46DC087D25D99C6322B63B17B040409
-:10DCD00032947D5123B589E82045EB62C2E7D165D6
-:10DCE0001BFED588DF56664D49C90ABFAFD54D70BA
-:10DCF000B8713CA07745830E01156A90A57D61AC93
-:10DD0000C1E1473238712A96BF6DA3832EBD8A6563
-:10DD10005A07935E11AD9C5EBF7D72F2C539DE225B
-:10DD20003BBC27DD2EA8EAAF5BF4D0C8ED54F6BAB1
-:10DD3000B93E80C4ABB0836943EBB4C1C5F6495367
-:10DD4000415F175DC612F076037E3A9BE894EC992A
-:10DD50000D45551AD215DB2DA908A7A947593487B7
-:10DD6000EA554A3AF5237B5B18D65382063DCDEF40
-:10DD700023C325E82F691C28837EBF24D6F74B4296
-:10DD8000AFB16AD76BFD26DCA467D5A132CCE3ED39
-:10DD90001BE07F4027C94A29758F34FC7B03EA4585
-:10DDA000904B0DF8DE2257760CF24194D6AB417CB5
-:10DDB0007BECE117269D05F4D11753188AAD750F3A
-:10DDC0007B8C3AE8FFD973A5944712F0029C0B04B0
-:10DDD0009C4F1BB9C548A77D751EA2E305177C188B
-:10DDE00041323EB6EFF76A267A5930DB350407FC3C
-:10DDF000B7CA3A3FF8EF2783EB5244E39870ADA8D7
-:10DE000052088EBED9520AC739F4C7BFDC7C0EC097
-:10DE1000F974B514F3E8046F88C1787DC67B91511D
-:10DE2000FD0E737C9D69884FE7F8E67A840B19E153
-:10DE300095FD09F00AE3256B07FAD7239E8F4AB1B7
-:10DE4000F5305ED69CD609384E892C13BC1B677BF7
-:10DE50006505E887BD384E467C06059F67B9BBBDA2
-:10DE6000A7029C9D13657617BCDA5836BA3C6B77CF
-:10DE7000C833558B1B12B4D7935A95320A5FA40C42
-:10DE8000B93E93BC7B4AE27AB223B9502BC3E91D59
-:10DE9000B2DB81A897E216BD0AF6E25312CCDF1579
-:10DEA000E1749C5D17E77662DF38925F01B11E591D
-:10DEB000531666B10C76F088F3808132D9CDD93211
-:10DEC000878FBDC2FB57CDFE7346EF7F83E8FFA36C
-:10DED0006689F5217C6ADC8BEBCF8C4AA267BFA0F8
-:10DEE0004FB62687CAA6DCF594C7BB4A601D3D51D4
-:10DEF00099E93ACE2F49EBBC19D6B80840F1D7C101
-:10DF000077A8BAF9EF0AD925D9F2F16412E0D87CE2
-:10DF1000E01AA6839DEA8FA61895275FED45FC6C55
-:10DF200006A5C0C7EF65387E00C816E56B00E4ABF8
-:10DF30008EF255EF4DCB5056EB59CC804F212D260C
-:10DF4000F981640E464BD7AAF0BE7D3123FA65688D
-:10DF50004558F0DB1E7DCE5000AECE2646764D678E
-:10DF6000A496E6D75E51EB2D417BA741A5F7EC5374
-:10DF7000C0876987803CF4973303C7DB9CCF52414D
-:10DF8000E4A5BA3CA247B7C6E7AFEF2863E9B3E020
-:10DF90007BF6F403387EF23B2C36910F49724D35F7
-:10DFA000E9424D2425F4EF5AB5D8A60C74B7832561
-:10DFB000B2E469363A25BDEBC45B969B5D88F8ED0B
-:10DFC000AC04FA2F19DE4F11F20FD05B2AB6F0E243
-:10DFD000D20CE394C83AD18759D63F7213FC23D5AB
-:10DFE0001FAA0776662E766D4888175617A1F9E5A1
-:10DFF000B0C13F069673C57CC7B116AA179DD97DDF
-:10E0000000F9ACC0E8AD415CDC1EBAEC595A377679
-:10E01000A786F10880B6EC44EE909C30825C4EBC42
-:10E020001B93493E86E4B4664007215F5F9494B534
-:10E03000CEC88FC8C22600F0A6B6EEC9E85F8659E2
-:10E040004CC2EFA1989AB4CA9F2C06659BFDC78E5F
-:10E05000944D27D2E27CC1B403C8325A79CB69D837
-:10E06000DF7600C8077EF2965082F4C587BEF014B2
-:10E070001CEC43399E95E6EDCBD1EEBE5EF1C73682
-:10E08000213DC4B87EF0C23F28FFB266AA36799C13
-:10E090006DD8CBB90EBD314F09D27CB3BFC4843E1D
-:10E0A000301A268E1B820F206B44BAD956A7321C19
-:10E0B0002F18E4709970E62A9FA66546701C4538B3
-:10E0C000003D0447B89C91BF07F01C75C073D40194
-:10E0D000CF512B3CAD5E3E5FA7DFBF54167E3FF8AD
-:10E0E000BDA8078FB3B78C7A2418A398F44A58E3D5
-:10E0F0007583DE3E32AA34A6D1FA3BFD7E589F7767
-:10E100006DFA61A628EB60D797127CF6EFAC88E831
-:10E1100084CA0A1BF45F97CE34F1A37FF965E0BB94
-:10E120006B0EBB18F215F0AF82DF5DE2EB35C28FEC
-:10E130005D8AFA1FF4F6552C1E46F8DE6632D9CBFE
-:10E140006FB3E7C26759E4E276D92DF4382CA8956D
-:10E150007F592C8A7EB51AECEC53C2840693CEA468
-:10E1600013B46E31467E7790D35B9279D7927DD18E
-:10E17000C5F5A3E9F77DBDDBAEAFBFB1C35EBE9A07
-:10E180002D1C87F475F56D2E96827EAFB1DA1FB027
-:10E190003E37CA1AC1F70DD6D2A905C9CE6AC279CF
-:10E1A0002CD5988A7EDA8A7FFBE1F425309F9D4248
-:10E1B0008FBE09725DB7E88D659194DBA8183EBFEC
-:10E1C000F5526CC139D2C8F3DBE0EA5B80F64172EC
-:10E1D000AB8BFC3AE6F4D7F62AE4AF59DA11BC5718
-:10E1E00076D9E737D6FC9DF3058F85E6BB6CF71231
-:10E1F000D29B23CDC7BD5B325219F4DB03A63E147C
-:10E20000F2C5A46F93AF93B58CDB7BFFD7975A0F02
-:10E21000E3FD01E523AD7FCB541E47699981CFB162
-:10E22000DAFDE7E76CF7A7CFD9EE3521C79DED56AC
-:10E2300078FBDDB89EABD464BD240FD9D15E578B7B
-:10E240005108A870EDAB49A32966A9D77592F50EC0
-:10E250004BA52755AF5E1EA5BF63C2CE78E2BE1F99
-:10E26000BBFB91FFF6BCBA00F5FB37FF5D615E9822
-:10E27000D7B1FB422C8DF4A9A6DC68AF2C03BA4AB7
-:10E2800051393DFD128B5D05144BFD7FF3FE10D916
-:10E2900007CB1EF4A41AA0FDB25FFCD71406783891
-:10E2A000B66EE03F0A915EF748DCFF4BF64FB904CB
-:10E2B000DE2F53D915F10C74222B9C5FDEFA65A07A
-:10E2C00009ED3E69F781AF51BFBD5F76A15C36EBCA
-:10E2D0007D8CFB007954CFC0EFC99F4AA989128772
-:10E2E000AF71F270BFFBAD9F4A1CBE7DAE940FE1D3
-:10E2F000DBDDE34E40BD55BBDF21BA3DFFFE9F8510
-:10E30000110FABF629367F77D56E25ED9942CF57A1
-:10E31000F1899A51027E5B29F875E5DE15A407564E
-:10E32000F66E7E07F975D53E974DAE035E6269C401
-:10E33000EB0B4AAC01CB0FFD24AC03AADE8CEE093B
-:10E340006B15D4EF1237D0D5C533EDEDB0FF8F721A
-:10E3500086F7C7D800C53557F56EE4E331AE6F4C8C
-:10E360003E7D13FF923F5C6F9CAED8F71D8EB3A726
-:10E37000A7531C72776E463FCED41726BF7EF36735
-:10E38000C7772561DCB71EFC7FBB9200FFF27FBC24
-:10E39000B7EBDB302FB6DFA7A11C5AB5E70F6166DC
-:10E3A000C17B9DC2FDB0633FFDC9BD3B815F8EBD9A
-:10E3B000E421BBEED8A37F394587791F7BE0E37169
-:10E3C0006877AE7974EE78A4AF350F9F3F9E8DE2EB
-:10E3D0003F20BDA63CD6754DD1BAEAFB240CC23015
-:10E3E000F688783AD6E7B1BD4A1A43B76FBFE84915
-:10E3F00079003FABE05D6B15AED70AD24358BE093A
-:10E40000F0BCF2BE0DEF285332E13B592847F10929
-:10E410006C13C5F5BEE4E273ABF1E98AE9481F6C01
-:10E4200080E4BFB3DDAA23B0AE53475EC7E3EC532D
-:10E4300037E27FD57D1BF9B88E757C1BFF7276069F
-:10E44000FD3F6C1D97FF68277EDC9B4BEB3ED23A6D
-:10E45000AE78F8D251FD33531E8C85DF6689C33503
-:10E460005531562BC8570FFEEBBD3B237C7D1B005F
-:10E4700021C77E76FC140C2EBFE11AF81ACAC98196
-:10E48000473DDA5DD066D9A32F109F1D7BF859B7A1
-:10E490004E72920525D07BC7D8E09F3ED4832B25B2
-:10E4A0005E58757728ED090FADD3CA5463BD1EA61B
-:10E4B000F7AFD2FB14A7FF95A9038BA40CEBB647CB
-:10E4C00029E5723995477859A1F7B9B5A07D3DA5E1
-:10E4D00099B88EAFCE43BA1B691DCDF96B38FF19C1
-:10E4E00096F5BC9BF3ED48FC79ACC7A34A5943EBC6
-:10E4F0007B4CD807AB52D20B2C03DF32B68EC33B1A
-:10E50000C2FEA3F974D2C3DD0E7A30DB9BF31E8BFF
-:10E51000AFC79ECF67C3D76D8A6EA31B136F6F7D86
-:10E520009A59DEA7859C58C992F505A70ED7572A98
-:10E530008B270B4B86E0EDEC55488EBFB55B213B3E
-:10E54000DD2917568EE08FFF4EE1F6C7CA7D07A67C
-:10E55000A0FC7AEBE02F051D723A5F79DFABEEA4E9
-:10E5600090FF29ABFCC7FE32ACC78B02EE558F641F
-:10E57000EE6FD57DEF64ECEF4DD5F832C2FF669FAC
-:10E580008B25A18B377B958CF18D838ACB16C7EDBC
-:10E590000C4D7F310BE39B61BF8EF35EBFCE7821C4
-:10E5A0008976C8732E4676A01A7BC303DFD787FC13
-:10E5B000B4EFBD3E7C35D32D7ABADD8127351A27DD
-:10E5C0003F588DC4AB79EC3565F3475D9A6C839BFE
-:10E5D000A9C9228CA7FCAEE42F2AF6FB0CDA7FA790
-:10E5E0000DD57F46651DB9D0DF3386145BCB32C4B1
-:10E5F000A71CFDC7672B4CB7D299512E5BE3ABE14B
-:10E600008337505CA295B5A4314EC48A58EF3D962D
-:10E610007EEF6CD3581AC667F5E5B235BEEA696974
-:10E62000313C0047D11AAD144DB391C62F6E91ED18
-:10E63000716D31FE6A114F60BBF7ECD903FDD6E373
-:10E64000B752F46378BC0ADC29B263CE1772F0D7F4
-:10E65000C20E3E28C50FA19F65E8DB54947352D9C2
-:10E660003615ED89F99F76AB4B2DF438BF6C6D11E3
-:10E67000D2CBE1BF2B4D99E86A91CAE96A6DC98690
-:10E68000226C7FD8777D117742A334CF0231CF43FC
-:10E69000C5DF08F643BF074ABEB16512C0551F5516
-:10E6A00018C65BEA234BB654C2FC0B8E28311F946C
-:10E6B0000B9A936A62F2F07176A1BC07FCDD857853
-:10E6C00004F8EF6E8B52F9DE369D9EBBDBCAE9B9CA
-:10E6D000A72D46DFEF6B9B49E5DEB67A7A3ED8166A
-:10E6E000A7F7E11BFD09A4DFBD6D4DF4FE176D0911
-:10E6F0007AD6AA9CDFE60B7C58E64DFB608BDAC32A
-:10E70000EB308E62E2CF89EF3AA0B81CDA37907412
-:10E71000C4F77895CB15275E5B5B836497EE929880
-:10E720000D9FD3556E47C6051CBFF6262E54E1F942
-:10E730006E7D5905D93D2C1E4339BD4B8ADF5209E8
-:10E74000FCF244F18CA855EE66051371356FA87C78
-:10E750004A178FCFCC50B97CAA676B0F65017CC676
-:10E76000A74C473A33E779B0462F42B978702DC0AD
-:10E770005381DF65566EA133B3BF59023E16CC2CD0
-:10E78000A787E896F37F7456F9368C1383E3199BB9
-:10E79000A893D56D6BB74D35E3DE3AD1B14927C0AB
-:10E7A0003F4F1447A81BEE2F3697F0EF3E4EE7ADD4
-:10E7B000FDEF507C2B3A8ED9E28D1DCD32F9393BDD
-:10E7C0005FE171E9E3CDA5DB2641FD1AC01BFAED3F
-:10E7D00039F3CBB21216BADE22E869A7379EA58DAF
-:10E7E000A2BF3A453DB3FCBC2FF15D5C97EF4FF8FB
-:10E7F000793ED2F34E57EA72948FADAF78F475300C
-:10E80000A57F04E249FC1E2F82F700D2F1FA351EE3
-:10E810009A5A90EF3FB4DEA46F3BCDC2E7A1989D1A
-:10E82000AF77B58E1E9736E1DE85708F129735E192
-:10E8300036D7E378FDA2816FB0E17870F69B337F25
-:10E84000D1A8E3DF897CE7213CECB2D25B518B4657
-:10E85000FB0C667B73BECEF6CEF90EE52B9CDCFE80
-:10E860004CAF8BE5E27A3EF0B7531E7A86E192C751
-:10E8700015946357A8895E84673A6BA1325307F2F7
-:10E88000915F5EF473FADFD9796F3EF1919A2A4174
-:10E89000BD70B2E375B078BC06F5564C8E59E5B93B
-:10E8A000F97C5C35E304698A1FD116330C29076EA5
-:10E8B0008A66C2F360FF45EA5BD6FDA42D8C713FEA
-:10E8C0003DEDA57D0E0C8868502E39CCAA36417FCF
-:10E8D0007B843CA951B95F78D661BD47E1F123A59E
-:10E8E0003164C1A388A79A71AC0E7613D3A0A95B3B
-:10E8F000AD3C80D54D3E6C74279E477CB9A33AED64
-:10E90000BFBB2209E22B26E2DFC5224E3F57C419C6
-:10E91000EF69E571C65616BFF034E4EB230A23FF16
-:10E920003871AA8D7F9DF33C20E8EADF85FEFBA5C8
-:10E9300090DB65EA01290BFA0FBD913E1886E7BF0F
-:10E940000939FEB090E307B7FD4709E6137424DCEC
-:10E9500031C469B8DA9F96C00EBD79FA1BFA3550FA
-:10E96000BFA37B523BE267C31A1E977F08E53EB404
-:10E970007B40C8FD704BE7B5B46F27E44B91992FEE
-:10E9800020E4499190278F6D7B7EC9069C5FC24B26
-:10E99000E3B4B2F49318D7676B64B253C2BDDFBB64
-:10E9A0000EFBB9BFCDE0FD76EFF917B4EF7FE84D70
-:10E9B00057FD06E3FFB3DDB124CAA9D4449B9C0AEA
-:10E9C000F7EEBB1EEB857B9FBA81F261041E3C8F84
-:10E9D000C07CA14AD6AD87D321A857D89F46B31B88
-:10E9E000D6B567FEE9D05F59834CE1EAFBA4F8F99C
-:10E9F00021A48746BE0F9D55B9682DD6EF5EFE5CFB
-:10EA000012DB8F7BBA45C265CFF997BB6A107FF7DF
-:10EA100014BDF6640D3C27B94A880E82AFE8F93F71
-:10EA200061D87F3C7A8D3E321D3EB67C354339E657
-:10EA3000B94DA67DFA7B6E5BCDBE61CDBB58AE668F
-:10EA40008C8F4D7279F87ED66D0BFB50CE9AFB57AA
-:10EA5000852BEABCC4FF4F33DBFEACB98F65B6AF84
-:10EA60009412935C79B45FC1F7B544FB02056D3C29
-:10EA7000285E27733E88A77DD67C93E0B5723C1351
-:10EA80003C335C2AC1D31EABDBFD1F309E3AE33220
-:10EA9000D2CBACDB0E87B31DC03183C3C1E133E100
-:10EAA0002806932008E3DF3AFFF97C84EFA3FA41BC
-:10EAB0007DE347FFBFE376393D01D6676BBB4CFB77
-:10EAC000F707AB0F7A118F5BAA6BFDDCFEE1749741
-:10EAD00023F8E8EE7A99F8F67835DFEF679F9EA085
-:10EAE000FD3097F89E9377D04B7B18492358331D00
-:10EAF000D30FCC3F96FC02C04D55D26F939F726BE3
-:10EB00008E2DDFA0981538F2564A87EAA3FF5D7F65
-:10EB10004442BD1412FBD165E6FEB6F24A0CE77F13
-:10EB200087A917DBBCF4EC6939E8D301AEC75B8079
-:10EB30004E685EF6BC144F33A37915B4F07DB62D44
-:10EB40005ADF0137948B6E07D4EB68CFF5927C6166
-:10EB5000DD3C5FC0DCEF98B8DC9EB752E4C8B71963
-:10EB6000969FF519FDCC6B5DF67CC3E36CCBE94455
-:10EB70000F7DA5B675E9391BDC9AA9C3FDCDC17E11
-:10EB8000853FC5A25CCEE5F8F81837DFA834A3BDF1
-:10EB900014BEB02ADBBA3FDAE9E276D2A13F7A1896
-:10EBA000C6E337D479298E63EEA39BEBBD1593AEF4
-:10EBB00030DFA1FD5E1FD2CBCE48293D1F9BF594CF
-:10EBC000AF9FE890E70378C49CD6CD7A6A7E33E0A5
-:10EBD000F5877932E9988EA2E7F2717FF1D63A2F64
-:10EBE000EDF78703FDBD8F4139F87D770CF7B7EF5F
-:10EBF000A9493759FDD7FB5DDCDEDAE112FA6A8BF1
-:10EC00007DFF19F86007F2812718A7FD4BD92BF279
-:10EC1000261C7E8E898FF0C17CB964327F964E1E91
-:10EC2000B2CFEF1474B353C8FB2D42DE3BFB29690E
-:10EC3000D60EBAD1EE5FAE552919F87242ABDD4E51
-:10EC4000286EB1E7D51436DBE93E142B70D8156970
-:10EC5000D263A63EDEE00B9E8A745F05FA92DB0764
-:10EC60009A6CDD6F77EAE33DAAB1CF45F6EEC9D9DC
-:10EC700009E140BC05F1EDB4730F097CFF4D310E85
-:10EC8000227E036AFC908BF240E324679C76C330BB
-:10EC90003819C0397954387FEBFA0CF6D358FB0396
-:10ECA0001FCAF11DCF00C873B298C8BB08911CEEF3
-:10ECB00008717FA5C3C5FD8477C5BCFECBA550BF39
-:10ECC0000382BEE604584BE67C321E2F7A1F0D13DA
-:10ECD000AC373E73FE2E5A2CF4BD30F3F7F75D7C53
-:10ECE0009F6DCE84D1C7F900C781E7EF54E31D972C
-:10ECF000651FE75197F19ECB12A7F8C8A5717E302A
-:10ED0000D743E4E79AF6D33ED5F8D8DADE7CE6CCF2
-:10ED100057693FF738F3C714C0CFFE7CB697811C04
-:10ED2000D92F097CFED147794026BE07ED6B941F91
-:10ED3000A8075E09A4309E62AE83B90F332847440A
-:10ED4000FD33DC5C9E00DD04DC347E9CEF17B234C6
-:10ED5000C9870241373B7D8B6FA983E7CDB3DE7C4A
-:10ED600011F315DE7ED8A7235C5BAB8F86AD729363
-:10ED700035DBE9C77CEFFAA890F6E9BF2525F2DD7F
-:10ED800016BBDE15197063FBFD924EFE5CF20F0A96
-:10ED9000D923FBA5D4E964A8A88CF633F65F134DFC
-:10EDA0006DB2EC7738EDFC1C5FFF1DAB70DECD6003
-:10EDB0002FB10CF12961A70FDA1D517BFBB89B091C
-:10EDC0003B1BA60B7C5D29E61D530D05E198C61281
-:10EDD000F49CC1747A823F50E586FA67B1817CE485
-:10EDE000A3758153CEE176C67F1BDE8CFF8D781B29
-:10EDF000A25BBBDE36F71DF2041E42AC85F6DF1FB8
-:10EE00006F5ABA71228CE72E0A923D9CD7D47EAD00
-:10EE10001CC66CBF3E0DFDCD3CB11FCE1671FD6C06
-:10EE2000EE4FE734D8F5B9537F7B84BDE11941AF8C
-:10EE30003BE5E6487A7DB9DBAED707E3C723C83F99
-:10EE400067FC786CF9A7DF525782791AC60B756890
-:10EE5000D7CD5629DE193E955D11B7D0C3FF751386
-:10EE6000D1C193E7CD6C027E4D9DC6F99CA19F1048
-:10EE7000000584FB09C5720AF36D362453F5987FAB
-:10EE8000B6419DA859D7B1A698DBB35B6BFDCD56B3
-:10EE9000BBF6753F8FA75E1BA8790AE9AA2298AA3C
-:10EEA0002577CF0047701CCFBBC4753B5363FDB8BB
-:10EEB0000FEB615C6F034778B95EA9D35EA7FCCC0A
-:10EEC000043B11184D2FD8F331F7A8A9757EC4471C
-:10EED00084C75F423B244ACE517A8D34E6724D0D91
-:10EEE0002CBCD3CDF557398E73603A98BB50FF8355
-:10EEF000036EB2737A43852ADA93FBE5A53F423B62
-:10EF000070E0250FC3FD94DEBF9F41E71A7A43E707
-:10EF1000CC433AE8951878B6307FE01F9EFCC302D8
-:10EF200018B70F9F6F308C5B0E3CCE6277C1F8AE86
-:10EF3000E84371CADB6546409E09ED7CAC0BF35794
-:10EF4000629FF8DF3B0FE8EEC160D5F6A96C280E92
-:10EF500060FAFFE7F9130F219C1DE3FEB319F9AC2A
-:10EF60000BE054C80E33A20877559E4CFCC7F282C2
-:10EF7000A989F0BEE670A40EF3D16AD44A94340095
-:10EF8000075FEFE77D8947B19F3AADB12E1BEA5786
-:10EF90001FD1C95E9917BDF61096A7BFC2CB1D6ED3
-:10EFA00046F620F22FB3F05FCD47A7D0FC0E0B3909
-:10EFB000DE1E35FA0C6994F5D054C7790E7B1E8B92
-:10EFC000950EB4E9363A48B8AC743013E860B2959F
-:10EFD0000E0CE9B3D0C1F784BC1D9B5F389F5CAFBA
-:10EFE00070BE194EF72DDE9C8AE1FC618EBBA93AFA
-:10EFF0002782FBAB261F68336ED2B0EC59E28E231A
-:10F00000DF997C61F2C33FBC2E820BF8E2421F3CC9
-:10F010001705F5B999F802FD382BFD5F32029F2CD8
-:10F0200060038730E77E81CA925920427E77F61BC3
-:10F0300065A758E8DE89A705B32576D4228F4E9CB4
-:10F04000E0650B1EB5C13C68E5E4F1FD9CAA774480
-:10F050002C7CD709F6331A855D728CE59520DF2D5F
-:10F060000D7AA6E1F98607A214DFF7C49B296F6D1C
-:10F07000C65B81AB810E3F1827EB38F90E7DE9FDA9
-:10F08000C4BF2F0618DA6D5BA72F9B80FEC907D778
-:10F090002426609C7323E0FF281937A9F132E5424A
-:10F0A000F58FE7FB657A943F1351FE9E89EF295156
-:10F0B0003644BD7EAA07EB6C9387DBBD9CBEB77B55
-:10F0C000B95DB8D1DDED45FE1A28F1D27EAA59EF1F
-:10F0D0003C85DB6DB33C229EFCE97A1DFDFB591E8D
-:10F0E000DE6E7B5B2AFEDA448473373D731B520C61
-:10F0F000F703FCE5491DE3F1DE752C91C9EEBBDD9C
-:10F10000CBFD7FEFC11FD03E526E598CFCCE480321
-:10F11000F46759AF05809A2C901F00AE8174DCA172
-:10F12000FBC90E5B10A9FDAB3A65F8FAE29FA39606
-:10F1300075F2FE4349F472FF8CFC8B35C29FAB2BFA
-:10F14000F5125F74B4BA7B702A8B3CD9DCDE8DD4A7
-:10F150008E9A3F8B7E5312D639057E133E717F23E4
-:10F16000791ADFDFC032EE6FE013F737F089FB1B4F
-:10F17000F81DF737B0FCF33683CAB8CF8165DCE7FA
-:10F18000C032EE6F6019F737F0B9AFAD999EBF6A24
-:10F190006BA1EF8FB4B552F93C0FB7B3597932BABE
-:10F1A00010F0DC7583DBC07DEBCD627D1E334A73CE
-:10F1B00063B08EBE08F73B7D4FDFCA703EBE288F1E
-:10F1C0001775466F6557C2B36B5AA80B0359DEFB20
-:10F1D00083F4F4A9DB19C60D7649C9668CD0ADF667
-:10F1E000FCE27C15F47359F4DADA1C28B77A1E595C
-:10F1F0008F793B93F4B5B1A5DA50590F552D7BC0EB
-:10F20000529E50D1A3FAA1FE7736EC5F8F7C8A70B4
-:10F21000A0F1B6C173E0FCB5B0E4E95246E73706A9
-:10F220004ADC29A4B3AB70BD2622FCDCAEBF88AD9E
-:10F230008FA29F3C417757217F40FD34A7CB93ABF2
-:10F24000BF1937A9A60D6F375A3DB9FAA4EA31653F
-:10F2500094FEF0BB344A3F1D6CBD8667C936232F30
-:10F26000633E912F407E5A978BF365978F3FDFF473
-:10F2700072BFECD7DEDA8BBCF0BC48F069972F5E2A
-:10F280008F71CE81C932C50B7A5DD00526E5B69661
-:10F29000FCBE14C6FDD6532AC3B8F35D1E6EDF4C08
-:10F2A0009C10E2FAF2DB5ED297174CF8597B0E9471
-:10F2B00027FE381643FDB799C5FC4827C92D3C6E7B
-:10F2C000FAAFD5A7E63442F533A73D9C43713FC161
-:10F2D000DF293C6F04E5B51D574FC038C707CF7213
-:10F2E000B9F480A0B71E575F0BADE7B420D90D8CE1
-:10F2F00075935DB036AAD2BEBC9CCF9F6E97F615B3
-:10F30000ACE706C59B0478DC7F9FE125FFFB238FDC
-:10F3100038A7D647F682DB97D0B2E17D7752267EBA
-:10F320005FAFF953988ABF395845E76693152AE5C8
-:10F330005D6FAEE0F1B940E8B214DA09B71CF071C4
-:10F34000F910F452FE55AA62EFE1DA083E650DF9B4
-:10F350003D652CAC27BC6BB246795CF037FADE1CFD
-:10F36000A13CEDCD4CAC4BB34C7E60C7B84F7E3367
-:10F3700015F7BBBFAEC5C4D921CA8324D346C67313
-:10F38000BC03070308CF57CD7347FDEB0250BF7D89
-:10F39000A916C37598A2D5D6637CB043ABF5225F9E
-:10F3A0000526D77997901C1ACC53A6F36DED15DC82
-:10F3B0005EC5EFC897AC9D1DC2F32C85429605B281
-:10F3C000AB24B4733A1A286C8479BCB6BCCBF69CD7
-:10F3D0000B29AF5D599043707630C38BF5930D2A9E
-:10F3E000E9A5C2A0378D765CA11937C494638B1F41
-:10F3F00091BBDC9EB79CDFACDACE758C4FD8CB7955
-:10F40000C22FC873E4377FEA31F755EC7872CE37F4
-:10F4100037725736C29B8B0795F5E1F3D91EA96A5F
-:10F42000C479166A7E823BAAADAB41F9359EB5AC74
-:10F4300045BAFBCCF03AE09C52D1DE87EB3E455713
-:10F44000E91CC35436B00EFBDD2CE8BCABC4AE27C0
-:10F45000EFF228627FB7B6DA3B8DC7B99296F14BCF
-:10F46000927E96B48C776A578EAD3CB1BBC056FF86
-:10F47000B41DA5B6EFA7A7CEB07D3F737795AD3C81
-:10F48000B97796ADFED47DB5B67265FA425BFDB331
-:10F490000E2FB495A7F57DC5567FC68B4B6DDFCF7C
-:10F4A000EE5F66FB7ECE1BAB6DE573076EB4D537A2
-:10F4B000ED66A75E9CE2FD7CF6B207CF79D9E282C9
-:10F4C000767BDC694F7BFFB15E5F87722DEC26FA9D
-:10F4D00056518F4379F50DDC9FF1CE89E92857CA43
-:10F4E000845D931534CE41395A13F6923E5083BC55
-:10F4F0009E1A9C4776C7293B401E9D8556201BFCC3
-:10F500001E40B9DC968C97B986E0F669DD7466A179
-:10F51000265C4F7175B3BDAA192C11C2F1746ECF60
-:10F5200080B788F57C3AB4B7CC63BF2CD311EF0118
-:10F53000F0BBEEB2F85D23F9594EBFEA64FDA85363
-:10F5400064E6C7678F146FC16745CBB3B5985E0794
-:10F55000FED5158887ADEE78730FF4BBB5D4CFF721
-:10F56000C1847FD555D24B7C3150A2927E61AA5E78
-:10F57000B1D012DFDAE4E57A25E0BD83FC3BB57457
-:10F58000E6611DF1BE56A5B8C36689C74792B00EA5
-:10F59000A8D776CD7AE39DEFC07B6FA9B7D00BF2E9
-:10F5A00028F698DBC0FDCFED02AFA55A652D585C5B
-:10F5B000605F341EC4E7241DEC0C7896976F3B887F
-:10F5C000CF9BBC3CBFEE8CD803B5284BBC73B8FDB9
-:10F5D000A74C71A7D6E1FA691C8E91E84CCDD9C130
-:10F5E000F7A9CAD4D791DED0DA3E210FD1810FE935
-:10F5F00040A227D18F2F1224BDE1C38D1C2CAB520A
-:10F600002A00DF23658684791735E11DB4EFE64BC8
-:10F61000DBED55F03737215E230DF6F50E787711C7
-:10F620007CED128FBF7665EB4FD702FC5D79A53973
-:10F63000183BC1F844A345DE6C17FAF42B3ED9D42D
-:10F64000FF246FE85CD7B4217B07E87F877C2AC260
-:10F65000D7CD506EF96EEA6648EF3E0D5613EDEDCC
-:10F66000EF2689FE4D7BF73AC15B75A54DB4DFF5FA
-:10F670005EA48AEC5B5FEBCF33E2CFD7AF30E3AC75
-:10F6800091F11A9EB493F43D2B75EB6857B4EA6E72
-:10F69000A327833CA8F2703B6623E67D203C22EF43
-:10F6A000A34BE0C3DC6F7BCFCC8712FBBCD76533A9
-:10F6B000DBBEDF757955E347B3C77DE0F7252CF056
-:10F6C0006E8471102F1D9F36D6C769FF8FF1736A44
-:10F6D0007FAFE8A1F3C0C27FA91276D22C0A9A01AB
-:10F6E000DFB819F909E763FCE22CF4362FAA47BE0C
-:10F6F00034E31DAF7973A85E2CC99416B2575CA68B
-:10F70000DE924F4C259875B719A7249397EB35F8DF
-:10F71000F7009EAB38B5CB7E5E6962B7BD7CDA0E72
-:10F720007BF9F494BD0C56F311B40B1A19C7CF9999
-:10F73000BBEDDF1BCD385F1D3F67E185914F70FD4D
-:10F740006B3BD7CA84FE37E3A9C5BDE91A14AF45A0
-:10F750006BEC7AB540E8F90287FEAC0A29E4E7D7FA
-:10F760001C8E1C42FBD18CBF3CEFD36DF96F661C25
-:10F77000C529CFFDAF6C63F085FCE58487C7171200
-:10F78000E0DFB41689B845317FBA14FD99C564A786
-:10F79000B59C86F2E9D7DEC4075E325AECE720DE7C
-:10F7A000AD571F97743E4EC232CEF5E5C90BF8F443
-:10F7B00053945762C6314C3FFD1F01E322E4AFCDA5
-:10F7C000B1E75A1EC338D24B1E86FDCC559E3EDC97
-:10F7D00006E5D5C52AE5416A3396FFC88F7140FC1E
-:10F7E0000EE59A127D3CD1FF932EF2D737087A3678
-:10F7F000CFE798718F5C9FD03F3EC9DC87F08B3C90
-:10F80000573FDAB967EE06D96CD3733C9E66C6CD16
-:10F8100026F7DABFF732295783F59BDA9492B95D60
-:10F8200065046B2C71F533C47A4D599CBE753194C7
-:10F83000EF63A92ABC2FA252D045EC90FD3CD838EA
-:10F8400026D1B981714794580AEA4F79C4FEBDC2E6
-:10F85000715EEC0CE7F931479C37A4B07796C0781D
-:10F860005BF41609E5E796C560C343B9C227F28782
-:10F8700027B149487F7395602C8DF8FD83427AC388
-:10F88000F3EA692F2C417DFE2CCF4FD14ED5B7D551
-:10F890004159FB8D42FA490BB0CACAE0505CF87B73
-:10F8A0002762ACDD351467DA03EB5A3611FD6B2F96
-:10F8B00043BDF273585F2CF7823F8EE507C11FC727
-:10F8C000E75EF0C7F1FD2FC01FC7F23EF0C7F1F9A8
-:10F8D0002BF0C7F1FD23E08F63F9DA404D8D2FCF78
-:10F8E0001EA7B2C6ED86E254FD9219A74251F2BEA0
-:10F8F0009BD3FF60BC2AC1E35563F76398FD503C7E
-:10F9000070583F222EF8F60DFF792F9E9F5E316DC5
-:10F910005D179E83F5BACCB818CF7F30F39A4DFEB1
-:10F920005BB1F75ADA0F76E71F69C1F5D85B1DA402
-:10F930003B86DCAE8486F2D1E97F997E97D3FE3593
-:10F940009F4E7DE4473BE02CB493BA29EEB3C9C582
-:10F95000CAE95CACE48F215F38E390261F3FEB2BB4
-:10F96000CD789E69303F56C4673C2CE5C578995BDD
-:10F9700012F314F99B24C2A08BCDC8CF967CE36010
-:10F98000459AE21CC1A041F697047619D9695A221A
-:10F990008A71A8CE11F26177093E5D9BEFA67B24A8
-:10F9A0003AF3F9FE7F5D512C8AEDD7E74F8F5AF37A
-:10F9B00063CDFCDD43A1E9DE7E4B7FAB43A5A3EA2B
-:10F9C0002905F4AA3E8A5E553C3C7F7DFDC1B3BD4E
-:10F9D0009897BC29B8B40FEDAB4DD1089D5F3F900F
-:10F9E0003F9DEC8FC1FAD19994BFAC04B9DDAA4414
-:10F9F000BD64B7AA38FF8AA1FA66BD1B857C06F6EE
-:10FA0000A3F85C20D84BF53C6A9CE21F9E08A3FD3E
-:10FA10002A8F97E70B04C1BFF6DAE2A6421FFBB8B4
-:10FA20007CDBA427E2D86E5354D5511C6D2AAF223B
-:10FA30003CAF17785E9F67EAFD18D91B0F0A39683B
-:10FA4000F6B35EF8EBEB9BDD6477C55BB38DBA5C18
-:10FA5000CAC7FC09F2DFA6E05D5ECC6F77E7578F7F
-:10FA6000DAEFA363F6FB6A6DDD59D4EF83187F7676
-:10FA700087966AD8AF6B84BCFBA7447F9FD7BE0430
-:10FA8000CC69B4DFC54C7D9B8A5AF7899D4F3FDA1C
-:10FA900089670D6FB742EF9F8779BF2A4BD6FB95D9
-:10FAA000E1E71656EEE3F7506D55FBC8DED9FAA92B
-:10FAB00094F1FC43B6DFD43F837EB8CD5E2914FCBD
-:10FAC0005428BEEB68AF94A05F69B72FCE3A6C2F75
-:10FAD0004FEBB39767BCE8B4578C3FA0BDB248C8A2
-:10FAE000BB3E90CF3C6962404539104FA66A10EE8C
-:10FAF00046D6BB16F7295D22CEBC48E8AB8BCDFDC0
-:10FB0000477F36C15FD8ECB7F989E67D1A45A2FF79
-:10FB1000E2BA43D7B6A3708D9BF68F4EFE65F1FC1B
-:10FB2000076B484C3AECA046C37E1EF562879DE306
-:10FB3000B4876AD41ECAB72C70C41FCC7D4A9C27D8
-:10FB40009ECB758EFF59C735FBDB097A0BED15F39C
-:10FB50009E02BAC70BDA17AB692916A4FC2DCAF3AB
-:10FB60002B5CC38C9E0C743CD3CFE5DA30BC25CF24
-:10FB700023BC9D2FDE1504F93D2805754A4A2FE167
-:10FB8000F95F284F162E87F990BD7C82F6A1CDFA39
-:10FB900039D9BD942FB6B341E2FE6392911D62AE96
-:10FBA000F3CE203F3FD378AE9492B17D4B298D4F59
-:10FBB00070950EAD2FE0E928C713CF2FBBA4DE7ED2
-:10FBC000CEA7D1616F98F470B1E3FDCB3E7E4EDAE3
-:10FBD000E483B7CF7E71D22900C70A29591F504E3E
-:10FBE0005E4F5AF8C37502F910FF3E8EA642FC71B3
-:10FBF000D0FB9046F901D9FD773020C9063F4BD69E
-:10FC0000CD06BDE81F385382F225FEC91D5DE7E22F
-:10FC100071C5817F45A3CCE3A99A5B5F3C54F6FB99
-:10FC2000E7503922C601D722C9D7DB726F01C0FB6A
-:10FC300003911FB0D960DB14CCAD94B56DB192A126
-:10FC40007639D84E1AA55D9C6D5333B40B9AED00EE
-:10FC50005D9DE63D1FA5F8E4DF65018F757C15F11C
-:10FC6000A6E9413AC7334FD530EFE18BC2316EACD4
-:10FC70007927D836D7A9C3DB01D86B4DF8E5CCF08E
-:10FC8000A7F0BB757CD728F0FFB3F131567F6EF13A
-:10FC9000FD33C307D5D78D1B79BE08978BEECBD02C
-:10FCA00083B2A59F5B0E7C4CF16BF57246E77454F2
-:10FCB00097A1C580CE2BB4DBC80F57B3EB34B40388
-:10FCC000364219ED808DBDDD14A7AE28BBB50B897A
-:10FCD000BE22ED67280F26332DFB3EE877B2A662E1
-:10FCE000260E53CF3D2463DC9B7D89D13991AC0333
-:10FCF0007E7EAF45C9AC1FA37F949DEDA5385020F3
-:10FD00007BFA8FB9B1CBE3C126FC819A23B51827C2
-:10FD1000571B590C59519552AC0699EC7446FB107F
-:10FD20007E63EFF578DE12141FE927BAEB01F5AA1E
-:10FD3000888B8FE724C3BADC5A23FA09C9A7548AEF
-:10FD4000BF8F47D31488B2A222671BC25391800E83
-:10FD500024849FC7B52627E4581AFAAF7A87B76379
-:10FD6000BFE5E703C097687A3838845753AE8C17DD
-:10FD7000F1F2E8627B3C990DC09CA17DD56F17DE46
-:10FD800083F18471C3E437F7AFCD7B74B2DE61F1E8
-:10FD900087695FD3AE37FCE2BE0ABFE31E8492A040
-:10FDA000CB768FC130BFE1BB71D2031E16F3BAC947
-:10FDB000BE584C7683E98FECC48A18FF2F66FC5E30
-:10FDC0002B67FBE9BC3D8B72FFC4E30733AF0ABE70
-:10FDD0002FF31BA46F3D50063C4A6EE6CD87F70516
-:10FDE000328F8BAC95988AE5A1F1D2B44FBF418A8E
-:10FDF00075C5A421FF77BD16A3FC01B626C7662FE3
-:10FE00009B79A8ABAF29199F03CFACA1F3401AD2BD
-:10FE1000E3EABC32B29FC3B9FDFF07E5EBFB9B36BB
-:10FE2000CFF5A2FCC4FC8559F05FA0B32309F2D63C
-:10FE3000F35121D32D7699476DA13898E7A3536CE0
-:10FE4000EFD36DF6F3834650AEC371C607747E2EB2
-:10FE50008369EDD8AE86D9CF097A3ECAB7D9E943CE
-:10FE6000FD17D9DEA7C19EB1DE4F3172FF01A69703
-:10FE70005BFB3F7584FE2739FAD732F63FD46FAE6D
-:10FE8000ADDF0E95C74793113FADBBD31E981AA89F
-:10FE90002D0A4C1B257E1FE0F1C70DD1168ADFD736
-:10FEA000326078A093F33E3DAAF0F36C8CEC3656AA
-:10FEB000648FDFD70AFA958122907ECF53EDF782C7
-:10FEC000CD61CE7BC2ECF6D073C82830AE1CAAEE52
-:10FED000A338FEC7411DFDAF91ECE5BE3646F1E308
-:10FEE0003981FEEB709FFA82CD77BA3A668AFCD7E9
-:10FEF00002C62EDDFCC05CB4EFFBC479BD8E884C1D
-:10FF00007889D78EA7F337663F71379B88F2302EFA
-:10FF1000F3FC04FA03E3F7E515DCB52903FE9CE7DF
-:10FF20003B1B0D295E66A19B3E19F06A1DEFFCC2CA
-:10FF30001EC5328FB8874DA3F1849D3B38DEB8CF04
-:10FF400037DEB322EE648ED738CF3EBF46B746F3D6
-:10FF50006B14FC6B8EF72CCE2F037EC71C4FE67400
-:10FF60003338DE05F6F9357A349A5FA3B8E777704F
-:10FF7000BC719F6FBC0DAE9604DA6DDB24CEFFDD45
-:10FF8000815F75E0BABED7B03A4AFA40D8C5176368
-:10FF900003A877B1CAC75B50E44DADB58CB713E485
-:10FFA0008021F2DC0D0FE66F68544EB545E97917F4
-:10FFB000D8D906E56F94D3F77BDB6254DEDD369348
-:10FFC0009E663FE533F9BD33A7CF9632DADB870370
-:10FFD000DCCFDA96AF5D7E15EAA51A3F3F0F39F305
-:10FFE0001C6658EC5F30880FFA70FFE5325689BA0C
-:10FFF0006DD20E0E77A46E5C0AD7CF5F79A8AF0DD5
-:020000021000EC
-:10000000CA1E974B477D0ABC10CFE4A73E16E07E80
-:10001000B8C7CDE53D9BC5EF315C20F40A531A24E7
-:1000200017E2E3E26CDAEF5FB8C8086980B745927F
-:10003000F48732A1A7F0DCCAA562A99C767E0435BC
-:1000400006F41B319414DE4F7469D1E126D4CBF150
-:10005000D025E41FC4A1610EF473A9D09335AF7A03
-:1000600018E63BB0B96E8263D122BB3DBFCD97D6B7
-:10007000D03ED9561961B83E0B1BECDF3D6ECE87E2
-:1000800071C7BD050BC6B8C780EED2CA9047EA8CCF
-:100090004F3E1AB0C7218FB38A5BEAF0635164D434
-:1000A0007B0CD6609BBC21FD369C8E393CAFFB9906
-:1000B000F0DBF6513CCC84AF404D4928AF0B9BF7A9
-:1000C000D9F29A00B1640C9B7178A6DC57897E88BE
-:1000D000733E3BA5FBF247BBB7A480A9AFF7978B54
-:1000E0007B3DA5E1F37E2520F26F07E73DFB9932CA
-:1000F00096897F78DC75C16125B6561FC28B8987CA
-:10010000FF693EEA12787FE6FCF7ABB9FF5664BBA5
-:100110003FD3BC17F892C1B2CA540B3D5FBCCC4D63
-:10012000F60C33062A90EE8E9C1BE0F7B899F64B3E
-:10013000FA2519ED972FDEBF516CCBDB14FD8EB481
-:100140005ECE3C42CB39D0A13C77CC2F91F83E56C5
-:1001500001E6B985F9FBA3763BD396E7B6FEC04F1F
-:10016000258CF3DD81F978967DEB42F0E7516E1630
-:100170002DB7E7D539E132F3AA06CFD1CE5EA4DDA3
-:10018000A7D3BD89DD78114DD78E649C59F223CD5C
-:10019000F381A63FED3C17A804F9FD795171DEC249
-:1001A000190FBE5E4E6A2512E6A3A6BC35F09C92DE
-:1001B00093A8C2A3EAD72BC97A7CAF8C9FD58C7841
-:1001C00058DCFAED18C6EFB4DCCC71E9C5427F9F6C
-:1001D0001BE4F18E575CE9628C632FCDA93D373863
-:1001E0002D43FDD6EF527F7346B88FFEB220A7BFD6
-:1001F0003B843E777EBF588CF3E51532DD6FE163BB
-:10020000A1945482FBC6DD33E93CDECA9DB14CE7C4
-:10021000DE9E0A2716042D71075F193F7FCD58EF28
-:10022000D988AF8D7FBBB3F77E4065CEDF82244790
-:100230007314DEAFA5FD6599DAEFFFF8793AB7BC24
-:100240001FCFA9A09DCCEE9887FEDCD6C1324B4AC9
-:10025000181FCC16E5642BFF3E58AE9A578365A451
-:100260004120B29782733B915EB64A4C10E33C5EEC
-:10027000DFC5EBFF427C9F73E15B3FBE05E5FD748C
-:1002800037F9815B853D62C2F77290E7CDBC3C06D1
-:100290003E5BC5F720E233F299F0D99A091F2FE7A8
-:1002A0001837E0BAFB30930240F0FDCDBB06F3886F
-:1002B0007FD0C66257C11CEE88EDFDE92D8CDA2790
-:1002C000ADF461B6BF28C7581B24788ED2FC4265B6
-:1002D00041746FD8C6198CFAC900C7C64CFD98EB9B
-:1002E0007A308BCBB10FD1769E86EBCAED3FC5D36A
-:1002F00017C5FD7FADFA7BD76920473A4BBA9B32D1
-:10030000D1F7F7437C9F3A7B8478F5CF053DBEA4B7
-:10031000C57F8070B46BB7D2FDAA6E89DB0D1B67F9
-:10032000F633C9D2EEB7218E6F80BB07EBBBCFE6A9
-:10033000F79E8600EF986016AAE6F06FD48F30CC57
-:10034000EB0E458F505E68A8BA9FF89D8E2A1470F8
-:10035000BA427FCD2BECB39F07BF320FEFDBC85102
-:100360004CBA7BAB13E946192A131DF5E4F0F6BF2E
-:100370000FBDD5990491BB0BEC17BC872359C0F373
-:10038000469CF3FBA5807747D8D88BEB320C9F9E19
-:10039000FE1FDF02EDB74EE4E76DE6C87D4D572244
-:1003A0005D5E1824FB0BDE3759EFBF795DE0EBF59E
-:1003B00020B79FB67EECA5EFCEF518895E7F27DAD1
-:1003C0007F0E7AFD5D263A017A7D06E765A1D7F7B3
-:1003D00059667A7D7E047A7D21135E9C6585193B82
-:1003E000707F56FD64DE6EEC4FBD68F68EFBE1A9B2
-:1003F0007C725392563326D9CE979AE3544A893F5A
-:10040000072DF2DDBC9FFB9B41DEFFB07E674CDF1A
-:100410008172EC24FA1DC0F938FBDD1FE4F0CEB97F
-:100420003098C8746FD1CE10CF1BBF5BCC6B24BE8D
-:10043000792AC4FDD991F8E681D020DFB050DED80A
-:100440007CF3AAA80FEBE0C5FA63F3CD6DF4F49545
-:1004500071BEA163C8B386F30D4BBE487CD259C2AE
-:10046000F9227FEB9F3B31CE31C847C90FEC7C941A
-:10047000FCC0C6477FD9FA01D577B60F8F704F956C
-:100480003EC8FFF109380FE34CAD9D9FB3E927BD8E
-:10049000DDC3060E7828CF96E7B5FA9349839B0D06
-:1004A0007D0CEF3D2C1778D8853E18FA39D3459C42
-:1004B00049ED630B43C3F939549DAEB6DE23F06BAF
-:1004C00031FE47A1F8D4D0341CAFFF74B4BF465AF4
-:1004D000A76A517F5BB6511DCA40D763E9A1CB43E0
-:1004E000FCBCEBE502EE9CBF795BD0FE74F2FB9C9A
-:1004F00095BFFAEBBDA3F4739968BF20F4B9F97FF7
-:10050000412833FF5F1CB2F37F35DEBF9981FF2F97
-:10051000CBD41EF8FFCBA10CFCFF05F8FDCA50069A
-:100520007E9F1DE2FD8F85EF7B05BEEFFD82F86E9D
-:1005300017ED6F0A7D6EFBE0A65066FBE03BA169FC
-:100540002785EFF611F0DD1122781E24F8437A900A
-:10055000E2D85D33D85EA934231C5BADFD7875DE2F
-:100560000FE0FD7D09E87ECE275DB14CF7CE40BBA4
-:10057000DBACF09BEDAA439A99BC7D2DFAE7775C42
-:1005800014A4783FE8C71DFF643AB83B94413ECFBE
-:1005900091B91CFA20F820D9815FA0FFDE4CFD2F15
-:1005A000137436965DF098A00F98F7BF85A60D9747
-:1005B0007F3DE27752768413FB4384AFFEF928AF88
-:1005C00076DD9823613CAAC8484BE827EC15FA660B
-:1005D0007248E7E71944BB5D6A5AC27C965D2D9A62
-:1005E00084E78D2CFD1D0E4D1BB93F271C00DF6FCE
-:1005F0004224EF8CA7B15DF5901DF899ECA44BB2A5
-:100600008D2321D23FF1E7496E9F6697DBE63CE4FC
-:100610007837E5BDF86666FE1D97BD41D594FF7F2E
-:10062000B2CAFF17429AF9BB52D4DF67D53F00DF49
-:100630001B02BE3733C1E7C4CB58708E177A1EFA3F
-:100640007B3F939E72F667FAADE63AB9512759E2BD
-:100650003A5278D0EE656194DF1D329D435A20E412
-:10066000C98299D9C26ED7FCD8FF1D224E7EC7F22F
-:100670005B6B70BFBBE726AD125150D0CCF59EBE70
-:10068000FC148A7F0644BF4EF807DBBB7B4FC77B59
-:10069000C761DC2C1CF7BCD92C8D7E6316DA0D14D7
-:1006A0008FD0E877BC723CDD518C9F6E94BA9B96DC
-:1006B000A25E9D1FE4E74AA28BC6B8BF6D9D8D6EFA
-:1006C00059B47A8CFA6BA9BE16E8A6FB2F4EBABEB7
-:1006D000A7BB29537E492C2C9B76D199A3E2351ACE
-:1006E000A1B89689DFE1E3F0F5AB89B74888EF5010
-:1006F000B5A4E1D1AB10D009DA4B72591FE5337DB7
-:10070000A99AD30B03BF64F4FB333ACDF59E13CE05
-:10071000FBE27099F5461E4FD4739C57C07D2F8A1B
-:10072000CF06B91CA38A507EF7706EC6B8BFF9DC3D
-:10073000D0A615A92E6BFF29BE3F33983F1D8BA273
-:10074000BDD5CA383DB2A897EC30BAA7DDB29E4BF2
-:10075000C3DC7FFC4156FCAB61E2EF18DD4BC834D3
-:10076000EDA4E603EDAEA2762AB40B9D7CBB919F6F
-:10077000E6EFD7C5F4B8E51E34935FC727920CEFB8
-:1007800099F157304D82F58F84CC7D424E07B705E5
-:10079000CD729236C9E365DD3C2F5F37E984CB1516
-:1007A0002DD06BC8958C6DBF79FE05D1D3A1BFB29A
-:1007B0004414AFD487F213788F5A8EC2CBC0684FDF
-:1007C0001C227DA19D21C5404FB5CF7DE27031E354
-:1007D00047A5E8F7D5E63E81F9843D66192FA428A0
-:1007E00087B27FB06C78A3502E1D2C27B1BC4BE88C
-:1007F000C9ED37CF7DA23D4872EC662B7FD4083A15
-:10080000FC67D35F8FDEAEE13983645425BB6AA3F6
-:10081000831E7E157613FEA76A8914F2C5829B0695
-:10082000543CBAE22D8984901F2644DF4FE2FD79C3
-:1008300013668B34D5327E4F434F740DF1650FAE86
-:100840000BE36909189F1C5A9F54E6F5294FD1FA0A
-:10085000F875FE5DC632F9DB3CFE1628E7FCAC7984
-:10086000787CEF2141AF07C33C7E7450C8D7AC6899
-:100870003BF953DE7A99E2C759F5B24D6FD02FE0BC
-:10088000517DD5466F2FE724F6872D7A01962F5E8E
-:100890000EF3F09F1EC9C1FD979A72750DFADB3FEA
-:1008A00012F61FACD30F495E5446FC0992DBF1C728
-:1008B00033AE9BC0CB58EBF67C5B2256E71A79DD52
-:1008C0002EBB9CE7D33BDFBF28E4EAB1A63F7F0FF6
-:1008D000D965857780EEF3EE2A5B4B715833EEEAEB
-:1008E000D95B932ED487F201D705C2B3E95C8A6342
-:1008F000DCE73FFDBE46E7443EF664DC4FFA87C0C6
-:10090000F391B6266A070B4CBFBF72054E85E7B15F
-:10091000D9CEF199E711BEC638312C8A2FF912CA07
-:10092000A1A54D0ADDDB7005B3E7537CCDCCFB6A96
-:1009300035F3E378DE578265CF43365C9274FC7EF4
-:10094000048BCDC373F4C37E5742EC6F7DDD9137CA
-:10095000F1E5A625B13A51EF3DFA7F8AF0B748E7B5
-:10096000F277518CDFDF7369FCF2589D653FFA85A1
-:10097000BF2B19F3262FCA32F1118FD54D1C8E8F44
-:10098000A571C9ADE963E3E564F1B044AD9C97A7F7
-:100990000FC78373FE80B1AD88E7AF039ED1EE1C15
-:1009A000091F508FD6E385CB15FA3D99794A830B01
-:1009B000F741AE6C94688F09F01B1679710D732D99
-:1009C000F03AF1E8C4D7958F323A3770E5ED218AD5
-:1009D000B73D67E2277D1EED5F98FB2796791EE500
-:1009E000F95B1ACD73E1CCCAC7F1DE84443B485BA6
-:1009F0003E5FDB3EE05216CFC2730B30EFA323AC59
-:100A0000BB6D3FD0099F137E9FD02BCE7D31A6A614
-:100A10002B500F1A59625F700A8B89FDB12C4AC79F
-:100A20002DCB2C6F9DF7CD997476456BE3E0B8D84C
-:100A3000BFC41283650DCF6B3DA96CBD14FEBE3AD9
-:100A4000CA7FD7307E796E077E5BC0CCDF1B3268F1
-:100A5000BFE90A81BF46F0F8F0B7D0CE03E184FBCE
-:100A60007A0B0C9F1EB4CCF3DD6EA95E9CA3CA5A10
-:100A70003419DB250F285386C3BB3ACA7FBF10E861
-:100A8000F07D2B1DFA26F27B659D7831F175659618
-:100A9000D8379CC2A67C16BCBC848A731AEDD7904A
-:100AA0009D3B2079E93CBCB98F037F4DBA4174B6B8
-:100AB0006695083B80CFDBBCBF8BB116B2EF178BBE
-:100AC000F358AFB858D30341BEAF5365915B37E4D9
-:100AD000D4B46659EC6E735FC7BC2FCAA4E7AF7974
-:100AE000836985D3A1ED3EA8A13CA604E53129592F
-:100AF000CB75C447177E3A9BEC9EF5D8BF12E0FB3E
-:100B000055BE271FEABA541F5ABF4D573DDC3D0D55
-:100B1000CAFEAFFF3E499DEA3984B79058B71AB173
-:100B20006E267CFE0AFEDEB27E3C7E562EE26762B8
-:100B30001D47D213E63A9AEB867614D2AFAF5CFD2E
-:100B400024D3EFF0B143D503C8A789A84A39740963
-:100B5000E9B50EBA678BE9BB70FFFD8A5697EDF7D2
-:100B60009712784E1FEB6FF409BF2446ED97E6F31A
-:100B7000F6AC9CDB8D83749F84F6963C20E60D8F4B
-:100B8000C375EB87B6982706FD8D437DCFBA2CE35E
-:100B9000940E1F77C4FE1CED94C17D93582C669172
-:100BA000D70F65713DF96EB4BA57CE107F319F4BA8
-:100BB000BDB945AA253FEC68BEB729D3BDA4667F61
-:100BC00083F7C60DDA896F3F71A868C84EDCEC7AEE
-:100BD000C36E27B237BE909DF872D61B4FB4033C4C
-:100BE0001FFED143FAEADD7A3FAD436EEBF9ECBF6D
-:100BF000F0BCAD8ABFED47F63DDD7BE36D2DA4F97A
-:100C0000482A600E7F1F4C8F4988EFD7F0925E8C88
-:100C1000DFE92C1D02E072D59884F8BA55F8A3409C
-:100C200067A75BEF677D2D8BDB5BE6381E2F4BE202
-:100C30003963B35FA083B59457DAC0488F98FBB08F
-:100C4000263F9BFD0C64D9FDE093E0DF814CFCFB6B
-:100C5000B4DCF2A7EFA0FDFA9442F9A05F8DDE406C
-:100C6000EF2F6BBD929E97B75E43CF4FC478DF9254
-:100C7000129F64C17AF535FDFEABD703BDAEDAEB4A
-:100C8000A173652BBEF5D79B913FBDADB0EED8EEFD
-:100C9000EB57DE3E0DBEBB27CA64BF7615F37C0E54
-:100CA000F75A89C7FB75773DC650FE3F378B9AA828
-:100CB00000800000000000001F8B08000000000002
-:100CC000000BE57D097C54D5B9F8B973EF2C496662
-:100CD00026933D210B37842548C049202128D60979
-:100CE0005B632510C40525C0844008109280568798
-:100CF0004A654200A3468D75C3A5BC8162ABADFABF
-:100D00008252A56DA4137101A518ABB5B820417826
-:100D10004ADD12411EA3D5FACEF79D73927B6F6612
-:100D200042687DBF7FFFBF177FEDC7B9E7DCB37CAB
-:100D3000FBF9CE77EEAC7096E4BA0A09F90EFE2EF6
-:100D4000266485731A9649AAD3448A085963A3FF77
-:100D500056093973F8E6D4C5898444DBED6EFA840C
-:100D6000581AB3EF34D132D92F9347289063C8A2D1
-:100D7000F23C0AAD0C0E712984240134218C074801
-:100D8000FBB585244212A09DDBDD60A765C54F5CE5
-:100D900000430A3EB74852795B5EDF7C0414FDD9FC
-:100DA000423221E3613CE3FB167C7E8B6A2985F7A6
-:100DB000E504360FF17E0E7F3F87CFC7168A61F3B9
-:100DC0004830F6E364CF65D2D066EF3F8FF5B1537C
-:100DD00047B992004F9E5C80847499CB1D842CB4DB
-:100DE000BF72481A47A1CD1E9429243EF3A75DB9CE
-:100DF00004FFBE1B06FF5FE1FA700C2112E992BEF0
-:100E0000A343CFFA460A0EA5F88B2A91031BB229F9
-:100E1000945C651326D066256637E0B37378A263C9
-:100E20009866FC0B5C12E2EF75C5E58079964F97EA
-:100E3000CB0379D87DD2E5D0CFF4AAA25BD97036A6
-:100E4000924CC822F66FF2BABAA37918ADF7FBCD6F
-:100E5000EE11948E8B6CFE00CC6F1151FC5D366CE4
-:100E6000227D2721549522FE1E9DEFA269B227CA3A
-:100E7000A96B47BEA3F3241BC90BC369FF0B253E17
-:100E8000809F96E97BEFF3E29169A7AE80657411CC
-:100E90009765186DBFB0AB722619875576E0A7A588
-:100EA000BCDD229FF9786FBFF47F957E7D797171EB
-:100EB000FE4B940C142F81D209C067A34DC867550F
-:100EC000CDFA764BDFBBE46FC409FD2AC77BF10D79
-:100ED000F32477313A4F6F72A9144FE7BB542CCFEC
-:100EE0009A766C1AA1E5D9845C01FDCE9E26BB8260
-:100EF000B4758BCF443C74E2073D7240A26B3B98C3
-:100F0000DBB5FF62C05BB1597D04D69A4B6E9F9BE7
-:100F100008F5E35D80E772789686ED098176A9B6DB
-:100F2000C008FAACD373CC5EA5E1BB83C5C7467BD2
-:100F300029BDB69A484D387E22A411E9FAC24FA2C3
-:100F4000B19F23F748012B9DFF74F99B3F4DA4F3FC
-:100F5000A9FAA9D96D55715926A0EB4C3793474290
-:100F60003CF6E9149F0B092B1F23E545413A7E55BA
-:100F7000FEE1122BEDA76A9384722AF04FF1FD81F6
-:100F8000166FDE86F2D8A08A78D73DA79D59809F3C
-:100F9000299E3F8880E70FB478F6BDF7F6D817345E
-:100FA000ED5A5C8E44E07352400ABEA3A8394D2628
-:100FB000C78E27FDD72DE099F587C6BE3082907B7E
-:100FC00088E76E2E4F4AF9584A278578C2E9815240
-:100FD000279383E9F2A7489F93C5B20AF83AE8FB42
-:100FE000D84E398C1CFC462E053C130FED6C52DF9D
-:100FF0007B8FB92C48FFAD16E2013C6F1D620B34AC
-:10100000D2AE3A7E725E4A17D247BD7F32D0F1151A
-:101010003379448D3C5F874F26C3296396F9248436
-:10102000827E437D514419DFD76E28093FFFDF835D
-:101030001CD37924AD2326958E1BE7279E4018BE2E
-:1010400010ED56D97A662804DB07E3E8FCEA54532E
-:1010500040A2EBCD97183FDBCC0D9E74DA54699F0C
-:10106000E34F27300F19E7A1D2F929747ED9BE18B2
-:101070002C0FF32520CCF1C5211CEE4BC7FA11BE75
-:101080001C84237DD9F87C946F0C96737DE3118EBC
-:10109000F6E5233CCF7721C231BEA9D82ECF5782A7
-:1010A00070ACEF527C3ECE3717E1F9BE3908DDBE99
-:1010B000F9589FEFAB4258E0ABC4E7E37D2BB13C5E
-:1010C000C1772D960B7DAB1116F96E4438D1D784BC
-:1010D000B0D8D788ED26F96EC3F205BEBB115EE825
-:1010E000BB0BE164DF43580F0A08F010CDE5F13681
-:1010F00075898B4A0A70B80A7C1C49EEBEE2F6A8D4
-:10110000D2E5390AF64EB4B3988857DB5EB43BCDCE
-:10111000611CD0354C7F3D5C3F7FEEFEE0BE51A4AC
-:101120008F6ECDA98DE544EEA397755749309DFE8E
-:10113000B36EF71C027A81E426EAF8B4BF7E60EB56
-:10114000EBE2FA6BABD2E991817F1B88DB4F1F95F5
-:101150004D785D827EB6A94A69200CBF8D8E33E33F
-:101160007BE7BBBC248ECE2F26FBF80BA04F66FB83
-:101170005D7F9A02FC9297F8CA14DADFD08D2618A8
-:1011800081AA1257C714AA77D46904F5E2362A72E5
-:10119000B0DE6DD17A7B9A1DC7EC28216DFB86A14C
-:1011A0003C0D2F60F6A7EB12902FCB4F86915BB3CF
-:1011B00041DE829242FBF3AF21E4116133A0FDE6F0
-:1011C000C5BF84FABEFE2C4C8E9AC9F3363A91EC18
-:1011D00056754A1485395B3CCF47D1574604BC53FA
-:1011E000A26979D4A3FEE7018E6E0B4C89A170CC65
-:1011F000EEE0F3D49C92B1C1AE29765A3E7F1FD95E
-:101200000B68CDEF54A73A6879FC21CF5ECA06A4DB
-:10121000B0CB3BD5A9C27C024D4E3A9FADEF1377C0
-:10122000232D177FDA2AC7120DFD2DC4BB53431798
-:10123000C784CE6909F49F19D7B9F265785FE98A46
-:101240008ACBEB4F9F6DB06E5827B5238FD0756555
-:101250007882924BC327657192A0437E1CD8A175FA
-:101260003D0AAC73DBC67807D22FDA550243F64C41
-:1012700027AEED2AF0B18278B26C1A86F22EF88E83
-:10128000E277F41C87166F92D06B356D7991F15B24
-:10129000F66F86DFF7383F47C2AF0D7865D2D9E5E4
-:1012A00078615CAF1C5F03788DD4AE298EC9A7111D
-:1012B000CFDB4C641FB555745CCAA74CAE889F3613
-:1012C000BD89F3F7D9F0EAFB37C3EB157103E3955A
-:1012D000A889A82729BF8E263991F50DF417CE7E4F
-:1012E000DDCEF94DA3E72CE02F36BBA89ECB89AC11
-:1012F000E7AE8E3B8BFEE27AC6C2F5B818EF413EF0
-:10130000DE2BCEF22DA0BFEC9B4C7E90B312E240C0
-:10131000B920A9899C4F5CD1C02733655709E81BC8
-:10132000328AA01F1D9317F0C33E65A85F2D90A1C0
-:10133000192865C0E390DCC0ADB4EB6CEA67289473
-:10134000FEB4AB20409BEA322DA6EB8E15F2E6AA46
-:101350004CD5CA9BB0F77DF228F8227EDBADD98C44
-:101360005FE750FFE56DCE6F7DFD48D86EF3DA2163
-:10137000DB6ED5E8C16DA9A95816ED23F1EF19C1AF
-:10138000BF1B37102FC8C7E4F07EC31B7132E7DBE9
-:101390001E0FF0B9FF07C405FE4CDCC60F503FC559
-:1013A00051FD24A17E62E367F8A27FE9A7E53FC76C
-:1013B00025737DEE8ABED2F1FF8E9F7F45110BF320
-:1013C000183AD9D521D3FAA1D40EA920A793E9DCE4
-:1013D0002700BE2C487795303AAA934900FC5E8AD4
-:1013E000B7A009F4AFC911003B63B1B47A409E893C
-:1013F000250ED7FF8AD37B346E00B970C5A8F9409B
-:10140000D493715F95DA29FF6DCE764543B99B96EB
-:101410005B52E9B8F15D84979BED283FF46F085269
-:101420003148F706601F45D96383F6C37ACB7E281F
-:101430006F059FE402DAFF5D67F66DA488991BE7EC
-:10144000E989637C7D12F8DA338A6E5073FAF8F911
-:101450006CFE8090CF3E7972E50B79AACC437DF883
-:101460000DF42FFA8BE4DF3CC3F5A7237E60FF4623
-:10147000F0FD39FB377CBE7F07F92F8C2CFF51FB29
-:10148000DFD8B28396D7A4CAEA71EADF3986BCD521
-:10149000A9D0B28DFA9BC768D964EB54A05D1995A9
-:1014A000503BC5B7873A79B0FFB04D6065F883FD12
-:1014B000C7C956A994E96B35F6F2B103E13180F35F
-:1014C00059936AC1F1A2460C8F05B97272BE228A85
-:1014D00014003BEE2C76298BB1BF2E7219EDEF3C38
-:1014E0008E2721D7A0B79ECA03BD14AFC07EDD6A88
-:1014F000237E477C5FFF508E2DE8D34F84EFE3AE11
-:10150000E57BA6D60DEED8E120A707591CA5F52648
-:101510002697651924B001F48487A82EDA3E8A88BC
-:101520003F2AB8B46CE6A5995F4BC443E77FE06BF4
-:1015300019A1349C041D74BF57E69682B00FB4986D
-:101540006C01B0A525436CC40265A7296005F9F8B4
-:1015500040C2755A0A6202A0FCA60D298EEDA2EBCC
-:10156000387560AFDD1B86FE57792BDDD3C647C6C5
-:10157000636FBB052FBA008F0FA91B5DE047FA53BD
-:10158000158C3BDC024D357AFDEA786637A93F348D
-:10159000379EC2594B7A365A80DED989E80F91E1DD
-:1015A000F1C8B769A9BB6E29019355CBFCD321249F
-:1015B000D0A8F5AB047FBD1BEF5D104FE143DC8E7F
-:1015C00050B1EC1C09F1AAD189F1E09796D40F69CA
-:1015D000077FF781F5C4BDC48CFAA01CDA7B12DA50
-:1015E000F2817F1F72EF7AEC4EC0A795EE8B418F90
-:1015F0008F3F6C5729BD2A0AF726C17AFE6498BF2F
-:101600008015BE9B102FC67DF0AA78BA0F068538CC
-:101610008E8C837DF029F7DCD820F2564258F9AE43
-:10162000F0DD88FD88FDF07BE660A62BAC1CEAF1BE
-:101630002DC6AF90D8BE969825A6FFB81DA5FA6511
-:101640003DE097BE8676D36395B683BD39E51EEF40
-:1016500006BB1D49DF88F9503C8E287784A997483E
-:1016600079383DF1403CB3D71566BA5FA0F5D2EAB0
-:10167000C206985785C32E01DF89769BE2993D13F8
-:10168000FC2CE25572EC3785407F880F865BFF2289
-:10169000A27CA98D476D02594B62F87287F15722DF
-:1016A000E1EB90B9B50CE67568A94C1A693FA7BC87
-:1016B00013534898F7057C07F886D2A53E818DD74D
-:1016C0004BCFE1E1F177687D8D7B9AB98F9EFDEA82
-:1016D0002BA3E681FD9E0778D48CFB0AC7DF3181FE
-:1016E0001FAB5775D17ACBE27B5D642CE8A92F0B39
-:1016F000FD0E888BF5FCB611E8FD5307C62BE655A9
-:101700009E2E6C1CABC167314123B968EF032E9547
-:101710003E9F37626392DF1E198FC7381E6F8307A3
-:1017200093301EF322F2CD20E331242F1EF98DECED
-:101730008D7207211EF917D90D7E038CEB45FDC96B
-:10174000E2C9D7B9D8BCA20C7EDE3C5F9D4EBFC4B7
-:1017500084241248D09495368CCFC684147C6E9421
-:10176000B75F19E44DE03F123D05FE8DCF9FE7784E
-:101770003F54B95C85B8A1253ABC1F9C96C0E824AB
-:10178000CA6FADF7EAC6FBEBB7B26EBF2CE07F7352
-:10179000FA9EF24E4A8178D53C8B7FC460E45CE0CF
-:1017A000E7AD6FEE7741BF515F59C3CA5F37B74F9F
-:1017B000D49E365FA16AECE9D5F246C07B8CC2F5B7
-:1017C0009B41EE3C6057293E2F06BB4AA718731673
-:1017D000BBBA88F83B208E6C1C5FD853237F09FB73
-:1017E0006AA49BE08384041E37E4F41371C348F2B7
-:1017F00025E4EA5DE0DBC2FEF837C2AB2C7ABF47D6
-:10180000C013BDF488227EAA1FAF2D91034442FE6F
-:1018100040FB78E85E09FDCD60A515ED72556514B5
-:10182000C667ABF265ACAFBA5D46FB19A4FAA196E8
-:10183000CEE74F5C4F18E3B32544724FD3AC7BD651
-:1018400084285DF9EAA577FF693DC4978BCD2A8C82
-:10185000775065F166BF4746FF95F6E10E427CFA88
-:101860009E8BDC60CF043F1CF4C8286FFE376537C1
-:101870000CDBC9E3D1079BF30332D059F2F68EA3F8
-:10188000E640FF552AD0E1EDD42D2ED07751DFDE92
-:101890005F5E8EFB47AF9A8F76933AAB74DE515CF6
-:1018A0004EA70E29BE12ECF891163381B8D191756E
-:1018B000A7509EBBD637B8A78DE88B2F8BF8B031D9
-:1018C000CE6C8C2FF78B2B1BE2C9821F8C7C725540
-:1018D00004FE10FA2A127F503DB630E19FD06342D9
-:1018E0007FBCC3D73975C896DB1B291E6296C88892
-:1018F00007C1976F7F73F3CF410F4751FED800FCAC
-:10190000FCEDAF5E847D08592E858D23FF07E737F8
-:10191000BA4F744FCBEDA3CBD5DEE5BD6510FFF913
-:1019200035AB7BCBB07EA35D89ACD706D65BD9093E
-:101930002C0E6EB43B4679F8BEEDCEBCCA7B73E18B
-:10194000FD79954B03006F1962AB01FD6BD4134613
-:101950003B21E6639C674C482681F1DA79ABD8AE2F
-:10196000CF4E58B0DE67738E0367FD4C14837E70D4
-:1019700002C12F7D3F2AD084E3359C5F8EF36F98A0
-:1019800008D047DC5D7E585F6A34C60F5A33587BF7
-:10199000F99268E68F4F88C775CAC221FF320ECB15
-:1019A0004D7C0DE3E2BD4F02BF35794C5170AE3036
-:1019B000D5A1EC87904BEB1413B1923E3C09FF9DEF
-:1019C000406480AE17EB24D877E6DB2C39E89F3EE5
-:1019D000930074B889EE0B29BF1F3820EFDA4697C1
-:1019E00078C03D3E369C7F2EE082D4B5A817AEF479
-:1019F00055213CFCE3BF6681BC5E2F793B605E9D58
-:101A0000F3AA6E2FA4F3A9DF2DE3B9D282EBDF1E78
-:101A1000C9F669FAF349D969CB85384A9314ED06BA
-:101A20003D22F0D8E1B0A07E693ACCF460D3518970
-:101A300097D93EE2055E7FEA3D07EE3304DEE97AA0
-:101A40003A613D9EBBE3703D629FF12FACE75DE8DC
-:101A50002FF27A325CE80F005FC97DF3971D0AAE62
-:101A6000AB9B44BB61FE3E1E0F22EF45A1DF2CE87D
-:101A70005BCFF94FD0B78ED3B7BBFDF41D17D2F6AD
-:101A8000AD9E783C65903309AEB7FBBD18E40FB14D
-:101A90005ECA07DD80EFBDEDCC4EB4BEEF60F872DC
-:101AA00014E5C2FC847FED4A607EB271DD157C9F37
-:101AB000FE7502D34BE0DF429C6271FC94AF130AC7
-:101AC000C3B4E77E2DC5F3B780971217F93240FAF9
-:101AD000F02CC611E38AF7A212F5F255C1E30AEF22
-:101AE00099C93C8CD3D2710B34F35B1B5F12959870
-:101AF000D47FDC7F818E898903F2A59E8EF58ABD15
-:101B0000598A25BDFB620CA5A9FDE5DC2867527B3F
-:101B1000C757703E6F94FF33A60622D17E6F90BDEB
-:101B200087E2296CF2922E6B4E7F79389B1EA1F4CE
-:101B3000CE4B4CEAAF4F064BE78989FDE83C31714B
-:101B4000003A0F8B2F9F04F5B0FEF402DCE75D082E
-:101B500065D0139661381EF2654F1C096CA78D1273
-:101B6000781C45CC07E21251F4BD1F256623FD25E4
-:101B700085F8CDB49C90EB9640EF0F820F7EA49D2C
-:101B8000DFF7C007570CCC0741F44B56717AAF1200
-:101B90007916BB06CEB31804DDAA60DC3326778F36
-:101BA00037FBDCE956D79F6E7503D3CDBB1AEA9B92
-:101BB0002CE44BF4C38B2B5361BC579C9EE3B1F4D4
-:101BC000F99E46AE4FB229DD68FD8B8932EAAB9FA4
-:101BD00091F3500FFFC064C2F97753FDBB3D3B1C2E
-:101BE000DFFB9578FAFE99CB089EC7D1F5F9195F0E
-:101BF000FA25787EC3226282E7A96A23319D831E7B
-:101C0000BA8DEB09CD3A6F4B0C6397357AE80EA885
-:101C1000A7FC781DF0A34D752903E9A107CF5D0F3F
-:101C20003DF83DEBA14706E6BF73E6AB27C3E903EA
-:101C3000C1C7625F10295F88CA23498FEF3F2E21F9
-:101C40006E3C0F2B71DA98DDDD29A19D6D3A9AEF7C
-:101C5000C5B2C3864A41D8E193BB58BD3C25BC3FC1
-:101C6000F86C623CF2EFAAB6D56E459707E2477A68
-:101C7000DCE939E91A4EF5E20CD98EEB4B2863F119
-:101C800043B17EAA67674E4FE67153BA9E844C8675
-:101C90008704EA0FC0399A93EF0F628B159DDF2FEF
-:101CA000F076835C2E41DC3B2E9140DA0DF5EBD7CC
-:101CB0008D82F3FB388FBE7D1269F942C64108CA96
-:101CC000433CB5DF10C74A2835B4837DC83868AFB8
-:101CD000799EDD7F3F713491EF272C2415EC0A911A
-:101CE0002B06E41BCD7EE244E220F6139F278AF305
-:101CF00071BDFD6A8B2261E302EB92B8DFFD651CCA
-:101D0000FABF32B75BD3BAB2313F658D43C5788134
-:101D10002CBB6D33B3FBBF1FE7311155B3BE84D26B
-:101D200068A26AF60F49E5F1BA72CABC21BAF6692F
-:101D3000DE61BAFAF49AF374F5990D05BAF250DF40
-:101D400005BAF6D95400B4E59CE61FE9DA8F68BD00
-:101D50004C571EB5E51A5DFBD181C5BAFA318FAE7D
-:101D6000D0D58F6D5BA32B9FBFFB27BAF64D3CEE02
-:101D70006BC4CBC5494C3F37294CEF34DA0B301ECE
-:101D8000D964D7C723D338FE4B6227E7421CBCE98E
-:101D900083FC5CC0F70BCE0B302E1E892F8C7A2C67
-:101DA00092FE343E2FE6E37DFEBCC5047250B79729
-:101DB000CAEBF9B46C7F6733ACA9398F9DA72A842D
-:101DC000E5F788F315F17EEFF98AE266F155A79DF4
-:101DD000DC1A862FD292F4EF093D29F82812DE048E
-:101DE0003F9E0D6F9EEF096FEF49649E761E15FCB6
-:101DF0003CDBF8DEDA24133F0FF65E93C4FC9D094A
-:101E0000D1E889BB501ECF55FF8B7950FDBF3409F7
-:101E1000F7136F2CB801F4FF2EAB1BF6649FCF7B3A
-:101E2000A3FA7E15DA57B3F626772ED02552FC7B1F
-:101E30006D52BFF8770D8B7F47EBF0B64CC8BB21D6
-:101E40000ED7E4FC1AE3DF4D1677EE60E2DFCBA09D
-:101E50000F383FE474EEA52F8F9F47DA07F908D9B2
-:101E60002FC1BEC7AEA870CE75B67D2DDDCFE6C240
-:101E7000796A2BEC9B34FB1CBABFE5FB9B28B40BA7
-:101E8000D4EEDD9184EB22FB55FAFC0CDDF7DEAAE3
-:101E90004251D83F8FCE2FB712B7CD22233DEFC18D
-:101EA000F76E22D745C9102F0B1E989CFD2FD9F332
-:101EB000FF481A707F68B4AB673D9743BB5346D762
-:101EC000BF218CDF653C87EBF5BFC14F93F03C0E23
-:101ED000F1B489DA45388FEB4862F679D361B64FB1
-:101EE000DE74744E2ACA4D52D180E77083D5371DF7
-:101EF00049FDFCB58EA401FC35B1FE357CDF3B5DB0
-:101F0000CE6B8378E3C99005F12613961F59BFCF96
-:101F10004C02484F96672CE8680E6DEE04FB6C2669
-:101F2000C6BC623516D66DDE27A37E2289ACDE4F95
-:101F30006C8DE0E7C416EBED569C476FB7124AE391
-:101F40000D764C6FB752E6E9ED569A576FB7D26BE4
-:101F50000A0C764C6FB786FAA618EC98DE6EE5345C
-:101F60005F66B0637ABB356A8BDE6E8D0EE8EDD6A8
-:101F70009847D718EC98DE6E9DBF7B83AE3E3F78C6
-:101F8000ABAE7EFCBE9FE9CA859D0FEADA2FDBFF70
-:101F900034E6DF4C3CB45DD76E52D7AF75ED28C246
-:101FA0003B214F7B099284900B4F3CA5AB5FC2FD58
-:101FB000B48B7A7EAFEB87B4B27C6B3FFD0FE8F554
-:101FC00011F15AC0395148CF4BE994AE7501C91D82
-:101FD000A4CD96EFDE5904F3F8E4FD4BF6413FCB78
-:101FE000B6E8F3B49707F4E57A322C16F4433DE5EE
-:101FF0008B00E5939590BFADD16B2B498313F321F3
-:1020000006C967CBF6CF2598F7E9F774427EBA5830
-:10201000A7E0370FE737313FB1DE95D4EF0BAA7D4C
-:10202000EBF4D0FFD83EB2CB027C5BBD5B220F4A03
-:10203000FDD753D37ED7E6F430EB32AEC3E877BAA0
-:1020400093F5E754D3653BC6F54FBE29BB597C5089
-:102050002F876BF6B378FE9A27248CAF19F121FCF9
-:10206000D2487891FD6C9F509F4802018DFCA91CBD
-:102070001FD654BDFC9D847FC07C1E960390171410
-:10208000A5461BF9AD2848FAE33926572FA7463C49
-:102090003BDC43C2F2954AFF83795413762E65E404
-:1020A0002B23DEEB76DF6501BD78AE785F64C0BBC5
-:1020B000383F28A1ABB584C9831378A5FBF2A5C925
-:1020C0004991F7ADAB9325FDF9F2D9F7ADAB93BFCD
-:1020D000DFB8C9BAE401F6ADDD102FA37EA5315EED
-:1020E000D63F3EB6F72BC989716816FFF2BA6D2C40
-:1020F0005FC5602773537576B277DFFB8114680282
-:1021000039767A6E83F9D43A3D2D007FE4F4DCAE63
-:102110005D6F13C50BDECFA1766A6718FFF0E5642B
-:10212000E11795635C6453096B6F6CB7335941BC1D
-:10213000772415A5A2DF79349FD94F47D1807EE758
-:102140009DFC3CE736382F1CD197C7733B3F57A106
-:1021500062E701BA6D3297A76AF37CEF498EC3F14B
-:102160009C939EEA847CE72697C925A9E03F9BF0D3
-:102170005C74A3C75EBA2B8FBD97A87B8FDD3B92A3
-:1021800001DFE0CFDB95AFB57CFB32C525F41B69E1
-:102190009D2F27337FD74C3C36D0BBE23CD7FC4148
-:1021A000BE0DF4AD22B95DE1F238CD3C4F6A0A3F75
-:1021B000CF955DEC7CB757CECF922755E7F4BE9410
-:1021C000ACF117C4B9EE954ECFCB404F9FE2B7822A
-:1021D0007FE9B385DFFFFE89D3F156BE3EEA682270
-:1021E0001FE1F8F2A0E2276F25635CCE8FF98A37F2
-:1021F000C8EE13109F1B6CBCEA6872BFB8DC512D8F
-:102200001F1AE58FFA9FC763E17C22768882DB097B
-:10221000C59D0BFCDF0CFF9E84F1D513F07EBFFC47
-:1022200053359EE7D3AA03E6D38A7EE6C679BA93EE
-:1022300059DEDF17003DA35C1B654D3FCEB3F44371
-:10224000F194DB601F14FEFEC1F0E73EC18209E796
-:1022500016D78C4AE9E73F46A50CE03F9E393C2A59
-:1022600016CE9345DCCAD8CEE64BC8D0DE8F698E39
-:10227000D38FBFB9809513F9B8CB6319DFE7F2B2FA
-:10228000C80314716BDB4CE281FB0E3FE3F9D9A26A
-:102290009FDC1407B68F8B9F929B5208E76912EE62
-:1022A0002B37C749BAFDE5F1E4925C58CF30DE7FA9
-:1022B0006E0AE3D36DC3587CC69807F9196FFF59AE
-:1022C000F214849460A3019F16590E8BC7B1296C38
-:1022D000FEC76359BF227E56752FBBDF25E26622FB
-:1022E0000E483D83B762A85E39D6622610D75A2AB7
-:1022F000DB37031FF6DE9FE3E7EA2EFA1FD8CBCACF
-:10230000BC72CC3FFA57EF6F013E63E2FBDBCBE9D7
-:1023100029BDF6D27D8EF7B86632FC0CEEBCBD2B23
-:102320009AF16D8FC38EF16C63BB6A4E9F161EA728
-:10233000007D0D76235E260DE1EC4735C7FB99C382
-:10234000560FFA31A5D198CF21CE3F14CA9FB1F1D3
-:102350009806EE0768F3A567C07DA2DEF30F95E04F
-:102360007B09763BBEA7A824E8802BA18A5B82FC70
-:10237000B22E4BD7A61498EF45921BEE0FA454B87B
-:102380003A5212E11EA18A62B6399B388BA13EDF18
-:1023900084F57197BB369B21EF5A2570924DCC7412
-:1023A0001C071DE78E946C5C7F8B7F6E470A6D1750
-:1023B000ABF6906179A0475C3352418EE7B1FC7572
-:1023C000E3FAD6A730BCD937D17D03E0430D9F0790
-:1023D000BE3E85E501513D7313D0A34425BBD8BD56
-:1023E0002896870A69D6982FE866F9D231906F94BB
-:1023F000C3F40CD4DF15377523C88F902F99E31BD6
-:10240000F85E9B0F7F07C77782413E053EE9008D4E
-:10241000900FA1CC24C8D7B32BC2CFF7314EE77AA7
-:1024200067F93D30EEECC98D98E74EBEF9EE3BB949
-:10243000089C5E2627F47D027188A844A67FA354D9
-:1024400015F531714998676A53DD35508EB25FE0FA
-:1024500092C1EE59F979E1121351A8BC4DE5FD780E
-:10246000E611E9C35C166765FA55211F0AB9903970
-:10247000728AC07EB23FEA17B5C4D0F54CB51FC012
-:1024800073C4A8E10D2570AFE0C545AC8F9F45C86A
-:10249000DB3FCEF558BCEC4D35814F4F8EBDFA4237
-:1024A00006D2F93CB8A179DBA6C3AFEEBB88C7CF93
-:1024B000215FDC7FF8554FDE3F9F5FFED2FD875FD7
-:1024C00085FCF27F9EFFDD12E8F1E394B160DE4609
-:1024D000FE17FAEC90EC3D7423C5FF1594A97C051A
-:1024E00000155281F466F94397733CFBBFA678B69A
-:1024F000F5E1F98AF6FD88BF43663A6F3ABE790A7C
-:1025000043B5F927B13C1F2380FD5F696B9D0EFE2B
-:102510004DB7A5671C8CDBFDDC5F33FD549F1CFEB3
-:10252000E92907A1FC7744E971C0F313EBDE707869
-:10253000E87A0FAF93F1FE1BDE4BD6E4039DE07CFF
-:10254000353DB5FC08F0D5A2F5DF1669FD6CE24B10
-:1025500042BBBB3C20C31DDF5EFDB7F2D118CE7479
-:10256000ACBCAA2D415716F6789535FC3DF1CC54FC
-:1025700046F7E58F6FB3403EFCF454EF1730FE0989
-:102580009E6F70629703F757623E8B1FCFB7C07E76
-:10259000F248BB950481EF954E33C1389567A64448
-:1025A000F9D6CBF9D038CF97F6C4607F4BEF953191
-:1025B0008E5449C7F251BC7ADB97B3FDAD611D4B18
-:1025C0000FAB33405F2DBD45227E95B55F47E9E6F1
-:1025D000F5DD8CE72BC6751AEDCB69B2CE027AC455
-:1025E000685F961077F364B05BADFAE7CBDA6FC340
-:1025F0007E979DE53C262195DB9B2232F1BB1C8812
-:10260000330FC37CC148F6E6C47A26941FAFB721C6
-:10261000FC74BD0BE11150A614CF2B7777BC948EC0
-:1026200062DD590476286AFF54DB35A4CF7F56B6A5
-:10263000CD0D3EA4025FEAF3212B389E85FFBC8CB2
-:10264000DF33389BFF5C01EB1C201FB26290F990D6
-:1026500027F78DB7C1F3C2547E3E3591E203ED6F8B
-:10266000DE6B2A39BBFD8D849748EFAD82EF1C8469
-:10267000C1B3909B23DC8E2CD93167F3103A81A62D
-:10268000E73ECAEA42BE647108714E25A76EEE8429
-:10269000F5CBC410FFF3933789867F8DFCB98CB8D6
-:1026A00099DDB1B3F76C3C2ED1CB97EDB7235E0526
-:1026B0001FC18D02532AC060AAA9B8FF7703FA7D13
-:1026C0001FA0555FFEDCDC95057A6399215EF0B9A9
-:1026D000147EFFF5C3D4616CFDAA6706E4452C2582
-:1026E000E59B595CBD159F9F505A5FBA11E479076D
-:1026F00093A755CF3EF10CE8A915FF79AF13F4D499
-:10270000DF94D66418AFF6914D4ED0EB2714BF136B
-:10271000DEFF5B400E7B5F777BAA24F2E2ED901731
-:1027200056872C0602E69F057AF2BF1F31BB208E2A
-:102730005AFFA83568A5F8A8DBC5F048CB4759F97A
-:1027400066C457FD6EBD1CAEF8D5BDC92AEEE7FDC7
-:10275000E91C7FE9A0AAEB7698317FB4EE4DD90D44
-:10276000C3D4931E5C9FF17D984788D2ADBE4DAE19
-:10277000B4C4F6AFA71E8F05E4AC7E17A353BDC14A
-:10278000CFACE17AD9C8EF3F1372CFF99CE205E3F1
-:1027900061229F9504987E6E7AECFE7147E9BC3EFB
-:1027A000DDF1AA53CAEBE377025997145F27DBAA3E
-:1027B00016419E41243EFF9CCB45AFDEE77646DDC9
-:1027C0004D2706BE7F3B83B5E6A0F3428A8FDA6DC4
-:1027D00066B79F3EAE7D42F6D8C14F7ADB8ADF777F
-:1027E00058F9C48B6F5D40E7B772A73971265B86D5
-:1027F0001DF4B3A0533DF077411F5D563CFDA2058B
-:10280000F220E1F9BAF83EFAACDCD96181BC4A2386
-:102810001EA7B67558987C19E8D4767406D8E5A634
-:10282000C7CE58800FFEB64722E0421ADFAFD9F676
-:10283000A213F407E009EC87A0572FFDFAD12D3839
-:10284000EBF713B09D0BCE6922D1EF5A984B12F2E1
-:10285000F793BFA7E3D7BC6375C3FA6B9EBCD609D9
-:10286000EBF84869607CFEF34DC9608F6BCCFE6469
-:102870001742F6BC66EB8F91FF96BDFEE364827A49
-:10288000D39306F24BD79906EB5BFAF015B8BE6A04
-:10289000E245FEABF9B95C0E7EE269859486F3F3FE
-:1028A000D3D3989C7CB4DD8A9B828F2C847D87E374
-:1028B000CF32CBE323ABD10FF9315F2BD5C4583ED8
-:1028C0006D6374EA4E357139637AAC9EB7AADF71D5
-:1028D00033EAB18F333D2920EF140FFA78EAEBD3B6
-:1028E00053B8FEC3EFA5E07B94EFA6C27368DF691F
-:1028F000F6448DD3BDC7F35AD9F8D7F1F1E9BCA39B
-:10290000212EF751B27EFF2AE02569220E463A8930
-:1029100096BF22C9FD8E5B90AFBE7C93E995BAC08D
-:102920009C52ACEF340753A03ED071B9847A81FA3F
-:1029300017E1E47A8799CBB5BE9ECE5391B4F8DD0A
-:10294000C3EEC555DF43DB69FC903EBEB1F43DCF1D
-:10295000EE934F915FB1CCE09F0968D40B49697A3F
-:10296000FB27DE270F2785BD87D5A70FFC88B75A21
-:1029700073E0970F821CBF6DC57B86B54F98F17BC6
-:10298000399F3CBEF7AD6B28BF7FD226E457AF67B7
-:102990008DF25BF3D415249CFC7E92584EC2CA2F54
-:1029A0007D1E567E1359FEFEFFB69E5D1641CF5E1C
-:1029B0009CA6D7B3D49F88BD90163FFEF5CAA1B898
-:1029C000CF32E055E0D3A8370FA5AA885FA3DEA4D5
-:1029D0007F6F120D1E05FE045FAEF8CD2A1CA7976F
-:1029E0007F057F0AFEEDE54FE37AF57834D62B704C
-:1029F000E7A8B08FEEE60D747F0DE7AECFC978EE95
-:102A0000DAADF638E3212ECBF36EBA5DBC1CC7CA33
-:102A10003D4996CDA03FC4F39E289687D05DDEE366
-:102A20008CD3F8F547DB6527E4D57705C2E74B6023
-:102A3000264512DC128D54DFC8BF5B63CFF2C1BEE6
-:102A4000AC959DF72C69BCCA09FE74777BCEEC79F6
-:102A5000E0C7EF97D1A7EA8EE6F9557E8F9246F14F
-:102A60005AC5964C4E10FF7DE06757B5AF9C099B49
-:102A7000C6252D7A7C54DB2FC7F3ACEA7BCC7D7C5A
-:102A800041C0DF0958C0CFAA7958FF7C05E4550141
-:102A90007D0C7CE4053E0A730FA359F0513EC967D3
-:102AA000FB647E5EC5F5DA74396FF63CC85FDCC73F
-:102AB000EE499C6C97C96658EFE3FCFCCA9F84FC06
-:102AC0005947F9581BE7FC14F86C5464FBFDE96F97
-:102AD0000F17DD489BD43EF3EEB88728FCF499B776
-:102AE00047FE01CACFFE35EB5DD2BFFDD43D5F2D61
-:102AF000C43CCA3D5602FBA2EE3D2F67DD08E5DF70
-:102B00005BDDA8FF37B0FDB17F8F03ED7A7726F349
-:102B1000FF9A9E3B33AE0BEDD346A4D7D369EC9E10
-:102B2000EAC9F6BFBF2F413E5D3B5D15D85DBEEFE4
-:102B3000AAFF7D14EEAFBB9F3BA3DB57FEABEBA917
-:102B4000E3F795BA1D641EDC2FEE8E63F73BEBFFB7
-:102B500030E917705F71D5AE0E4B15AD9FFAC76F98
-:102B6000C781BEE97E8AF913D4BFDD0A2EF59E0720
-:102B70000EB49829FD3E079F6F0821573D682F83AB
-:102B80007B18FDF1C2F0D04DF100EBA278A9013D18
-:102B900019091F7FF9B7C5C7170B61FCDAF689045D
-:102BA000E2E97D78913CECB903F32EE8FAD9F33DE4
-:102BB00067C6817F74B6F59E4A63F765FEAFAC3792
-:102BC0006EC8BFEB7A19BF3F90A6E23C8D7CDF9FB9
-:102BD000AF9FBD1ECB4F3ADC38DF41CA7BFE90FF72
-:102BE0005BFC3DFBDF76BD67A3F77E4E6F870BCEA8
-:102BF00053BA9FFB368B9CC3BAEBFE3F5D77AF9F0A
-:102C00006372DB26D0F9BD430257944891F3381F15
-:102C10001AA2DF47CCE27EC4ACC46AF41F667958BE
-:102C20007CA58914EC837B6A7E8F8CE70E984C43DD
-:102C3000F1D079797E00F3B614FF88FB208FEBCAC0
-:102C4000556EF69D2FFDFE6A56726929F86F071BB7
-:102C5000E9BC68BB830E93AB892E61B647467F8F74
-:102C600042F4F3FE32E552CC0B995DACDF675C6356
-:102C7000D8375C354F5F7F25D99E04F97757D698B2
-:102C8000315FE80A43FBB5435CB8CEAB48C32616B8
-:102C90009F39373CBDCAF1D41F0F03E3AD1F9EF827
-:102CA0007E127379D4FE78B37AD9FED24A2BB8BF9C
-:102CB000C5F3E4D60C0A9F84EF3BAD7C68815FAB23
-:102CC000877DAF53D32FE245E0FD5CF12DE864C46E
-:102CD000BBC0AFC09B910E5BE14C42E38FF74191CB
-:102CE00047E225DA7CCB59BD7EA31DF1F8DA0E76DA
-:102CF0005FE1B5E2AA967C283F2EA1BF767AF278F2
-:102D000062A3EB3D6826BBD9FD2F8FEA2AEACB6789
-:102D1000918A5FC67305C827D4EE4B219F50BB2E06
-:102D2000C827D496219F50DB1EF209B5F5904FA815
-:102D3000AD877C426D19F209B5ED219F505B867C11
-:102D4000426D7BC827D496219F50DB1EF209B5F552
-:102D5000904FA8AD877C426D19F209B5ED219F50C7
-:102D60005B0FF984DA7AC827D496219F50DB1EF2D4
-:102D700008B5F59047A8AD87BC416D19F205B5EDD2
-:102D80002F0E3DAF2B97905775EDA7DADED095A7A4
-:102D9000BBDED5B5FF61EA315DFD25EA27BA7A4190
-:102DA000FF4B734FE99EC39985BF08F631ECAFCC5A
-:102DB000FD775D3F0A29C738B3853420B441FC96BE
-:102DC000C268D286D04EC51CE0F491DE11E9C0AFD6
-:102DD0005BFD9B81B90E4E3A9305FAFFB5C9735955
-:102DE000FC819F13CC867FAA948963BEC9807DAD88
-:102DF00038F7748664121C4FF930242174856248B8
-:102E00003081F261280A617C28019F2784E2102624
-:102E100086D2F17952280D61722807614A281B6118
-:102E20006A680CC2B4D068844342E3F1BDF4503EFA
-:102E3000C28CD085F83C3334096156682A3E1F1A8B
-:102E40002A41A8862E45981DBA04E1B0D05C6C9743
-:102E5000139A837078683E3E1F11BA1AE1C8501564
-:102E6000C251A14A84B9A19508478796233C2F7483
-:102E70002DBE3726B41A615EE8467C3E36B416E1B4
-:102E8000B85013C2F3438D08DDA1DBB05D7EE816B8
-:102E90008405A1BBF1F9F8D05D0827841EC2E7853F
-:102EA000A1071016857E817062681BC2E2D06F1088
-:102EB0004E0A3D86F082D0D3F8DE85A19D08278793
-:102EC000FE80CF2F0AFD0EE10F427BF1F9C5A10E66
-:102ED000849ED0ABF8BC24B41FE194D01BF87C6A6C
-:102EE000E87584D342EFE2F3E9A1B711CE081D43A0
-:102EF000F8C3D05184A5A14F105E12FA1BC21F85E2
-:102F00004EE17B9786BE403833F4777C5E16FA0A32
-:102F100061EF7E7F72A47B895ED37710D7B2C70F33
-:102F2000EA3B5F846CD19D4BDD1FE3443D397B1D43
-:102F3000CB23D95C726A1AFAB5ABAD2AFFBEA641A3
-:102F4000AF7E6307FF6113D4A4B13E200F7001E789
-:102F5000DFD78AF72681BFB4B9A0AB16E221B767E5
-:102F6000775500BC339DC5573773787B3A3BCFAC60
-:102F700018E9C272C5EA11787E451207B78ED78666
-:102F8000B0F744FBBA4C5EB6F764E1BD8041F6335E
-:102F9000D87667CB8FBA2EDDBB1DE5BCDFFDBC410B
-:102FA000BFFFEBF4C27FE9FDA7067AFF08A7972BC6
-:102FB000A3FC199CA7E21907F55336A4C989B49F4D
-:102FC000CA16C90576B26A63FE0CA05F01F1603CC7
-:102FD000714184BCAE7739FD16379809C41517AB1B
-:102FE00004E3B98B77B13C5F88839651BEA8E17C3E
-:102FF000B1EA969D1670416B1A96B1FCA3008B3313
-:10300000D9E87FC0CF2B5AE660FED1CA47F5F1A7B9
-:103010005A88EBC8708EAC7F5ECFE34CC678A53182
-:10302000BEF4663A8FFBBA59DE11913370BDA7E941
-:103030007A219FC37BBDC306FA9FE201CF49C4FA40
-:1030400045BC52E081F4BFCF8079A127F78DC03C09
-:10305000B593AA9A02EDBC549C3AED90FFE09D080E
-:10306000CF29FE309FA4A73106F3918E527DAE4248
-:10307000E293CB3B11BE9FD6F54E26E1DF6FD49F86
-:103080001BD85A30FFBAD24C07A6ED2A1F49C0FB05
-:103090008FB4BF71BB211EF98819F381FC644D2ADE
-:1030A00029EE7FAE50BEC98CFCB178771CCB0FF3F4
-:1030B0007BDE847C7D418FA31B7366405ED1E2E69C
-:1030C000EC7C0CBBED36A39F27CE4B059DFAE74564
-:1030D00097C7C2F7115734BF8EF4A4F4D2D5D7B630
-:1030E0007C81F70728BD8E47A0D7F181E8159DC1E7
-:1030F000E3816E912796177B1554AE4B4039ADD8BE
-:10310000101CD1A0E147639C9E64D8F1BEA3C827E0
-:103110002E1DC2E841147732D0F5544B21D2CB4852
-:10312000A7D27F54213DC83B0EFCDEEE821CB2E8E4
-:1031300032FA7C118F5B2E68BA04FDE79C0CE6D74F
-:10314000BFB61E722D09797DBD8D78A8F3FCC67AB5
-:103150001796FFB23E15CB7F5DAF227C7B7D2EC2E2
-:10316000E31696CF23E4893200E6D58DCE60723423
-:103170003A43ECABAE4B85B874E93FDE2884FC9E45
-:10318000247FD2ACE999E877EBF234E65DAECFC3A9
-:10319000E832F33CAF5B24377C476571F985BAF6BA
-:1031A00024777C5F19EC07CF1B59DC1C87DF6FBBD2
-:1031B0007A6682AEFD95CDE9BA7249868AFA754E75
-:1031C000698EEEF935156374E54AFEBB09C4166DC8
-:1031D000D29E4F51CAB23C6F176BFB65C3C4941BA0
-:1031E000E8F85F1E3063BD911EC72D7EDC8FFBB7F4
-:1031F0005BDD60874EC03D325A3EF11719F5DD099F
-:1032000033F1BBA8EA3E21918D0089C2E4E9F421A3
-:10321000264FA5FF9009ECC3C9AFAD787E57B545E1
-:10322000227EB843D543314FC7BDEE312BAE7BC9AB
-:10323000169978F1BE92DA06E7D6D73D32CA0DE785
-:10324000960B728299706FAFE7B751EEEDB4B6AAE4
-:103250008BBD7F82EEAFE3202F492AC0F383CFCA14
-:103260005AAB4D906F201F480239FDEC2919E32914
-:10327000CB57FFA5C8057AEDA5B6B78AE938C75B75
-:10328000651CF79347ADDB6494774F0A7CD7B56F25
-:10329000DD018C33BC945ABE2283F2C1C7D5817143
-:1032A000A877D6B1F8767FFCD0F502BD815F357A7C
-:1032B000ACCF6EB17332AA7CD2403F5499DD786EA8
-:1032C0007ABCC58CE77954FFE3F9FFF1D60413D338
-:1032D0003F4F21DF2D56548B76DCC52DB287FD2E56
-:1032E000846A81F992BB642F99086596AFE06F9666
-:1032F000BCECBC464FDF6B574FC4FBC5C6FC290175
-:103300003FA732E5D59C03AD788E9DCF92095D8AAB
-:10331000367F5CC457482AEB5F7CC7A776D8FD7719
-:103320004CA6F0A4877D72F0F40E07EAC74F4DCF8C
-:1033300017DD40E12765FE0F154A9706D97B5F062A
-:10334000E4EF985AB64A782E72EC0E388FFFF809DF
-:10335000B31BC590E76BADF8F5F2A103E507C10C0F
-:10336000D8F97230594A85AFF212CCDF984FDA782B
-:103370007C20C0CEFF6112143FAE5A768E75ACD061
-:10338000712BDCC3AD32DCDB3DC6EF2D3C96C1FCBE
-:1033900021619F3FE2E52A13934FB2877D7F11F2AF
-:1033A0005E866BECA9D0A7BB3386A1DEE8B5ABA4E3
-:1033B0000DF54A35FF3E70EDA356764F47252E900A
-:1033C000C7E584CB1FC8337D6F85E589FB809D975A
-:1033D000914EB4731F9B03D59DD9F0FEB68DF1F8C5
-:1033E000BED91D00F9E576C0461507E88F6584CD86
-:1033F0006F55AB14086AE214E2F73808D8058DBEA1
-:10340000E96F0FF4766029B7774B8921DFA7556FF5
-:1034100097CA631CB8AE15AD3CEFB9775E32F98E32
-:10342000E2ACDA1B786916CE5B7207C2CC6319E98D
-:1034300009C27780573DCEEE0319E7655CC760E7A8
-:1034400059ED9E330DBE27DC3BAE61DE02DF042E5C
-:103450002869E820F05EED67F8AC6E97905EFFC5D6
-:10346000FD2A71CF4ED07D19299F057A6DD93D7403
-:103470005F98DDC707BDF67A6700FDA54F48ABD35F
-:103480004EF9BF76CBCE2B27C17B0FBF6E01FEAEB0
-:10349000880F8E30C5C14FD2DC7847E94561ECBB5F
-:1034A000C19E7F5FF8213CCE84EF517C2CDD2163EF
-:1034B0005E83A61D3FDFF7337EF613CC23AA795334
-:1034C0007637D1A735F0733E05E73E5F819FFFED6C
-:1034D000791BFD989CCC81FD18A37EE9E7C718EC09
-:1034E00027DC9B007BD993C4F2C0BF543CB1F1A848
-:1034F000970D7A37A900BF3B2AF46E35B77B629CE3
-:10350000A560EF68F9C32D4F3B21FEF05FF73C9DAE
-:103510008C7914605FF2FAECCBF5556CBCEB9F8DA7
-:10352000C2BCA5CFCA3AC781DF57F1F3979DDAEF46
-:103530009AAE48F59664827EE6F67095BC2DCB0572
-:10354000F6D0173EAFA2DFFE2BD23A1D6759A74334
-:10355000BFCEC5B04ECD7D902ABECE0F9AD9FA8E81
-:10356000B5B0F52EE9B74E3F9E835CFF0BABDB8F0A
-:103570007E4610EDF8899D3281FB67BD7E86C1EEE7
-:103580009F26AD5B011FABD6FCF57D85F2C5F291A0
-:10359000143F940F2AEEB2A29D5FFE5B76FEF9B156
-:1035A00054928207F02F049D6BE9F315D43F00FF7E
-:1035B000A26F1EBD767F39E0B1D7EE0F127F753C4A
-:1035C0000E55D7FE32FE5E94E461F99075E23B3011
-:1035D000BB0DDF81514107B07BF236A0530651D9B4
-:1035E0003E511F4FFDEF115F2C5C83FCDF3352FB1C
-:1035F000BDDEFAE8A019F27D7B764AE817ADBAAED7
-:10360000C4594220BF95C5C1366732FB25793C9825
-:10361000F762A5748DA6E3DD92A9B2E7AA8BE575E2
-:103620003F4CF0BB3362BEC6E7101FB781FDB39BB2
-:10363000D0FE19D7BF3B93F9CBAB6413FAD3B516C1
-:10364000E65777F3EF3EDCC7EBEFCB64FEF5C399AB
-:103650002C9EDF0D7E249C4F5F64C5DFEB21641A36
-:10366000C6C915C2F84F117873299FF7CA37FACB2C
-:103670003D1980A785A4D30CF49C553C47857B035A
-:10368000EF27DBF03B4AF4AF1CFA99CFFB396866B1
-:10369000F704DE8731E8BAE6F378F2FBF019503A26
-:1036A000FEFB6916F463FDCF59D14FB8399AC5FBBB
-:1036B0004862AC027C7E0DD7530B265B3D703E30DA
-:1036C0007FF2CDE500697F7E42F15561EBD9944FE1
-:1036D000C76934313BDF184FF0BE24D9D85508F8FC
-:1036E0003B9FBAC590274F57BFEBBB8481F8487FFB
-:1036F0004FA116E20A1710C660C5885F5DB9D6C231
-:10370000EA0F661E99754F06217F866C26B03380BE
-:1037100023E08BCA58DCE7CE863CFE78800AF2DBD9
-:10372000650AF19B186CB6E37788585EBF3807B915
-:10373000A2980463E9FA82FBF5F728AE0A9A82A3FD
-:10374000E07C47097600FE4C36D5ECA2E394974A1C
-:103750000580F7DA0D839BEFD1CC8F67DD33999627
-:10376000E17B5730CFB512E6F3CCA7420F7CBA50BD
-:10377000212FC8058C7EC087F5F1AA1FDBAD667CC2
-:103780002EEE6F08BAE4D3EEB5F89DCFE747FB699C
-:1037900076C2FB96F07193CF32C53E8FF9692BB993
-:1037A000DCAE147CF7B85E5E63B354F63D35F007CB
-:1037B00029DEE6731889EFED59AC7F7B16E3FB1029
-:1037C00097C7C18EB7CA4A82B8EEE7AC484731EE18
-:1037D0006C0EA3B358FEB29887E0DF6AD280F93747
-:1037E000D53C1E63A29A04F3745B7F81F9FDC63C4D
-:1037F00021EA2061DED98A1DC6E79A788EACD34BC8
-:1038000018E7942C3D4B607ED20FA2DCC0EFF32D65
-:103810006D180F30B633B74A28E7E666EA4F49FC21
-:103820007C8B96AD2D12FEBEC3FC8C9EB1F8BD7292
-:10383000EE575773BA52ED3D03EE0155833F85E7CE
-:103840005FFC3B515B981FA970FF77718BDECF98AF
-:10385000BF51E36732A0BB576F35E4879BB9BF7197
-:10386000C4D23316F4BDF19EFD11139BBF3F996086
-:103870007EA4B867AF707F52F0537A9659773E2690
-:10388000EE7356809E62DF3B30E453D9F1BB2B15BB
-:1038900012FF5E258F2B9EA4FE267E57E67014DA5B
-:1038A0002D1167EC2E71F84DB1F0394B565E107B3F
-:1038B000FD2CF0332B9C1605E01953178E7383DC17
-:1038C000E9C8CEEE8BE36E2E19BF05F286E66CCD0D
-:1038D0009D6DCBC4530E7E1F69EC6B90CF7BF93787
-:1038E00074FE581E37DB43F747DD2FF62CB4511515
-:1038F000BD2CEBFCD90AB5E7DDF7F66C85F2DAAC46
-:103900006256BEBD270BBE21BC76EB64566E14FD1D
-:103910004D9E0D79F0DD0FB0F295B4DE0F7E2EBF17
-:1039200007547181847A762DB73F227E54617A9E46
-:10393000C129EC773ECED66E4356F9DACC24F8DEB8
-:10394000E771FC3D8116D5B316ECF5FA0C6F6516E0
-:10395000ECA3E6487E0BDC8B7F333092DBAFB0BF4D
-:103960007BB13693E5096F1C5A8EEF0B7CD17E56E6
-:1039700064159E7B3FF1FDFBB9F69F99CF91A16C39
-:103980007D9A7ED6FD33FD4C51F5F311FE99F8CEAC
-:10399000DCBE6CCF16E877E54D6C3F4C8EDB75F7DF
-:1039A000FF4F353C3B12ECFEA9C7AD09C0872B9FEA
-:1039B000FC5D5635F87FDC1FFAA4E36D0BE47DD780
-:1039C00085D87771EA43EC3B3975BB3A2C33F2204A
-:1039D0008FB5C3325533BFDABEDFB9522ED3F831BB
-:1039E0003FCF12F9DAEC771D573EF937FC9EE04ADB
-:1039F00053DB8790E74B2E607134E33A37F1F7DE03
-:103A00008773FF30F1825F70FDFB558E673BAC73AF
-:103A10006316C1F67284EF767DCAFBAB88667ABC0A
-:103A2000AAC8615329BE0BDFF43641DE69F5C3D95C
-:103A300005329DC7F68C298F037F448E6FF6B0F850
-:103A4000663B8B6F56C4775E478D14F9686BC59DD6
-:103A500036BACFBBF47ED27BDF0FE286A556213F7C
-:103A6000D7CE9E96C1E265507E256BD59D203FFB4B
-:103A7000F8EFB32D9838361AE4BC2B3BC6E4A2F21B
-:103A8000FF747AE547308F05132F9A01CF4BAC8E28
-:103A900091952C3E8EFCF1747AF9F3500FED21EEE6
-:103AA000E1B50493AEA2EBF0BE2263DEB4775C8C8A
-:103AB00037DC3D9520B7571F65313F6D9F89CEB3E9
-:103AC000A06F1E627CEA985DD70971AB0D69F9E0C1
-:103AD00047BB324A3ECC4AEA1BDF95E17D03CA620E
-:103AE0007CBADC71F07CB0F3E8E4F4F810E846FB53
-:103AF000299F2CC397127AF5FA65D36274E5CB67D8
-:103B000026108F366E7A79BAAE3CAF2247D7FE9A2E
-:103B1000256374F565D6CE090DE7E0EFD73B1EC5EA
-:103B2000FCDEC3EDA7DF9A0F7EEC0ED92DD1F52C6C
-:103B30007FEE91B720FFFA24FC0449018B8BB1EF93
-:103B400035F2F318C5A3E8CE63F63F6D01BF5D13F0
-:103B5000E737DCCB3B80717CE3798CC817FF67CFFC
-:103B6000632C43F9BEB8F7F73C3F7D89AE8C4CDD42
-:103B7000DD81F469DACFF2989BA8DF02DF13FBE165
-:103B80002E6B00BEE1FED9EF8E5A54CDB94C7DA804
-:103B9000117F5777EAEEA3786EF3AB2CA6B7EBDA7A
-:103BA000BFB0C03DA91FB6AF46799E41F5572CE581
-:103BB0009BCE0E327617C493B31D9887B3B2F91219
-:103BC0008C53C786E623AC6DBD04FB5B159A8BE571
-:103BD0003AFE7BBEFBA23B67801DDEF74C1CEE0766
-:103BE0005F9383231F827EAC0ED40F65E90B368072
-:103BF0009FB02FDA9F772D1DAFEC3F7F8879E87556
-:103C0000BB248C9B96C9649F04F9F7A128ECAF4CA8
-:103C1000FEF384D5F4F9A553995D2D031F87D6CB08
-:103C2000458E5BF17BD2117E27AD6028D32BE62E2B
-:103C300036EFE9A139D89FA82F1E3A4CF7DD18734B
-:103C4000D20E65B1BD6F3DE62E09E18F426310D6FD
-:103C5000EF9AA340FEF92BB9BF48043CD1F6F87D9A
-:103C6000B0FEFA78622C09A3B704B4723D3C1FF48D
-:103C7000309CD3677B660D4D82DF23EC526CA047EE
-:103C8000ED3617F82FB38AF3D56ACDBAE4E7AFC69D
-:103C90007B10D6C41E33F803F329D4EAED4511ECAA
-:103CA000CCE5434DDC7F6EC4F50A7B448EFF18CF14
-:103CB000B517F2F88090A792A1261D5E3A25261727
-:103CC000FEDFB27381D26C6F35CCB7B384CC7B0A84
-:103CD000F5686716DC47FFBEE64FE96B03FA3B95D4
-:103CE0002E02718C95BDF367F27CB6F95FCDE7FFCC
-:103CF0009A4C7CC017AF5D7C71A787CEABE3C6F151
-:103D0000E3C12E88F1D60D65F987C4D5F30DE61B06
-:103D1000EE895121AE5F06671E13FAFC79C847840D
-:103D2000F861FD1EEB76F8406ABD93EEEFED90175B
-:103D3000181504BEEDF8639402F663EC70EFBAA1B7
-:103D4000982F386A1A7CC7C7D36E5508FA419E9FD0
-:103D5000C2F348F33D9BFE12F268E4336F33933FA6
-:103D60002F97C34ACEB78BB91C562AEE58388F59B5
-:103D70007440C67B918BD7496377417C4075E03DA9
-:103D80007D218742DECCC097E3813F195FD686E272
-:103D9000B87C67F37E991C94C92CDFAE6C4C1CEE8A
-:103DA0009FEB4209D84EC8AB90D3CDD9DEC761DDB9
-:103DB000654D54BEE938DE0D6913405EFAF8C4E281
-:103DC000027EA27C925AADE183A68EAF14E013F37B
-:103DD0006409F9C44AE1540D1F95F7FA27AE19C9D1
-:103DE000741EB33666E3F79445FDCEA1C24F191C8D
-:103DF000BF6FE5FCB5D81E1C017EADB921CA0DDF31
-:103E0000913F99A8A21E5B738B843F4EB8C65C3E5F
-:103E100015FC8B350F4818DF03BF03F44FD1A10603
-:103E20008BF61CE4EAD0383CAF9E1B1A8E707B8662
-:103E3000F78F8087CAD0951C8FE3C29EF77DD9701B
-:103E400033C6D5BE0C58DDEC3B63FAF85DA1C78DD7
-:103E5000E77FE60366B24D85B89B57C6F3BD4CE2DB
-:103E6000BA5B62F13B88E789F89B38A71371382B5E
-:103E70007C0F5763474F2BAD59B00FE9178F2B615C
-:103E800076FFD31D66766FABE3CF45265AFF71B63A
-:103E900007E3722FA57ADF86F5ACB82CF0A49996CB
-:103EA00057DEFEB413E2E5029F6D4A7004EC97DA28
-:103EB000281E213ED8D622970698BF133347935F1A
-:103EC0001189AF578472103FC2DE08FDFDECFA5431
-:103ED000DC940A3D7E363B24F87B159783552007FA
-:103EE000446B6FE694C3EF9A915C09EFB9F6D91B66
-:103EF000260F424F537E47B929CBC9C4B8BAD0DB8D
-:103F0000467BB4576EBBFB02B0BBAA3746A5EB9B02
-:103F1000F29BBF3FFD0EADAA7DEAB16940A7923189
-:103F20001281734CA39EFC1F2B97089D00800000FC
-:103F3000000000001F8B080000000000000BB55BB4
-:103F40000B7854D5B55E67CE9C9949322F9210C23A
-:103F500023F1CCE441A8018747243CFC3C10082015
-:103F60000627F8155153994404C4BC40B9A642BF72
-:103F700039210902A53654ABD4A29D50B0D4AA8DE4
-:103F80008035AD3C06411A8AD569B5B7F416E828E4
-:103F90005CDE60C05AF116E5AEB5F7399939930485
-:103FA000B5FD3A7E7E9B75F6DA7BAFBDD6BFD65E99
-:103FB0006B9F9359C523E5058500D7E8772B80F8DB
-:103FC000E667923C1CC0BAA21C143BC0BDD896D870
-:103FD00063FD1280D28E3440D43CDB117BEE964DD3
-:103FE00000FDE979234011C02C9DEFC432800C8084
-:103FF000FBDCC07F0DC83410E08B1B38FF742BCC6A
-:10400000F3E3FA608E64C7CF37DD33D92B63FF50FB
-:1040100059E0F3AD889A6DE9C867B7B9B77890FEF3
-:1040200017E52E13C126A40238CD51482DA4F94D11
-:104030006C7E0095C9F36572F7D7F6F9AE080DED01
-:1040400038FEDD5B6F8D2828D7DEE5A3478B726CC9
-:10405000BDF1B285F195A5E1D831005DBBACA14DB4
-:104060002837E07C02F27FB46B58682D6EED18742F
-:104070005D05A4D59D2932EDAB6E770AE3AF4B7693
-:104080008504ECAF7376E5FB519E923D4961188142
-:10409000EBEC493203AEFB59CEFDE3E5227A3E74E8
-:1040A0008AE044A1775ACD807C2BB39509A4B7BE92
-:1040B000E4D7E54B6CF5FD97960BAACB0530B3C45E
-:1040C000A19AB05D7C25076034C043AB67B0F6F5BC
-:1040D00060262A1960EA957200DC5BCD953BD9F326
-:1040E000DA2B298C9EF9DD4829ED075E17600BCA93
-:1040F0005F36F85B2B01E5EB4C86E13B705F9DDEA4
-:104100002C5F137657B7CE60FC65BF9C369DF65585
-:10411000BB0399695C8110CA233D9DB09B48FE8713
-:104120006D5CFC8FEBFF3C46C6F11F8F718C046405
-:10413000DD27B63F395E60F6EC247B4EFEC53FB707
-:10414000FF0FF249574450501EEB1581B57F940381
-:10415000D5A427E40340BEEA6D03C704EC5F054F16
-:10416000BF9664C4A3547D49223C59B12D89EB9F6D
-:10417000A7E124518F4BBAF1F4D5FC609EC6FF65D0
-:10418000786AFECFE3A9B90F3CB5FC3B78BA8E1D27
-:104190007DE089E16CE6218E0FC871F8B600C30B93
-:1041A00093BBD392156A42BE7BC9AE84AF6B504FAE
-:1041B000FA9C47F64D8BE1F5979EC0CF494EDDCE78
-:1041C0009DC96AE192C2AF62E7BB81E2C6BDE9F573
-:1041D000A0E0F379D8C6C70D2BD9AFB0E7FE5EF9E2
-:1041E0009AF16EE357B4F31EB233E1C78D761CC368
-:1041F000EC27935D13ED4E7625BBD7EDB66EBA9ED8
-:104200005D87E7067E477A49B42BB8934D7073BC3F
-:104210005DAC77126E3E0E9B81FCAB2FBB4A1BB888
-:10422000DE75BA256C9E1E62E701A4950F6778398A
-:10423000F4EFE0A5ACA4FDEFB67E0067E4257E3385
-:10424000F2CF29C6AE41D4BFB45531537CC17F8E65
-:1042500067332A6063FAD4E8872353508E994F76E8
-:10426000F7ABD43F75A24B1B0F0A6EAB9BFFB45C40
-:104270001F59C7E46EE5FA0E44CDFEE171F418A4AF
-:104280001D71747102BD91F3D339E266F384D87362
-:10429000C29F308A687D3ECD0FA0ABB41FDA6FD6C7
-:1042A0000EC1BD16ED7DCFC48F2C649FB292E88104
-:1042B000C1B8DFABF2637E7B123EA73888F2DA3DED
-:1042C0002B5B55B3361EF558ADA9D1DA2E2822DA6C
-:1042D000A9BA5808793D3DF568F7E8B8D4D7C5A321
-:1042E000D5381E2C63BEDE78C2091BEF65E3C3D64A
-:1042F000AFB1FE5D134109F512270779B43879157E
-:10430000697D7ED4DD9DB8BF502FFEE6D5E68D9841
-:104310004C3580FAFA86E7E9565B16DA17383E0A1A
-:104320003D3FF4AB1C87A024ECF77AF2BA3DC6F30C
-:104330009F7EB2717CF87AFACAE8315EC3C7222345
-:104340005E5C66FFFE8F510E57BAE056D1FEB5FE99
-:10435000A475E022FBEBF80EF99521B8BF24E8C65E
-:10436000AB11DF6DFE29A8975AD0FB7FDA4AF1CA5C
-:104370006FEAE6E778DF29748F2F40FCB8808F2F33
-:10438000F56C6A550B993D583FA3CDD7C17B7B0295
-:104390003D31C13F347C33FFA4B88DFAC9EB256EA3
-:1043A000DCAFD9ED82007329EE4526F37C2FE2E5E0
-:1043B0006D9387E7770F697A7C586B23C9717A18F8
-:1043C00012B333FEC25060D837D3D3DDE9DABED59D
-:1043D000BDFEDB715F9154182E204EBED3B6ABB537
-:1043E000F996D8F860DB5E8693EEF9D43D113ADF9A
-:1043F000EFD6F4D4D4168E683812C8EF6A1820109D
-:10440000073B0455C47DD6100E7AD967594FBF516A
-:1044100013C62BD275C6DFD973BC92301EA4F4AF7D
-:10442000335EB3D3ED09769C9E60C7290974854E2F
-:10443000870CF14C8F73551DEB5B32508E87B60A9B
-:10444000744C50BCB608230136780EF9EDE308AF82
-:10445000B2341863FE46CFEF23B66100E514CF18DF
-:104460007EDF695572514EF27746BFEB576E22FCE4
-:10447000D4B76422FF264FA4D586ACF734AF972873
-:10448000A779C1F3C75633CE7BF7985F1EA0F9CC4E
-:10449000C2FB91DB3DD7C16B6BC23E3626D06A02B0
-:1044A000FF535F12DF9B13C6AF48E85F97406F482A
-:1044B000A0571BC757CE17989F54A2FD48715FE6BF
-:1044C000373B3DDDF942F77926D8599E64C0FDCCD3
-:1044D000264E1FF07CE85F6D8FA3DB8EFBC9DF7576
-:1044E0001C4BC07FF7A6834AE787D4473CDBD11734
-:1044F0008E0A12CF3BDEFF37FAE740CA3BC1702E6F
-:10450000EF138DF45E51F7B74B91470AE9A14E774F
-:10451000F90348CF7CC6B82FAC0BB5FE8BFE29E85B
-:10452000FF33BFAFF75FF453DCD3F7A9F3977E7E79
-:104530004DA4F58EB45DF06FC6FE8AC9E1BC7A94D5
-:10454000B32295B778CE88748ED5D9B83F95EE1240
-:10455000FD74CE542487F39616C6ED13DAF3699FE3
-:104560007B978BCC3E6A13AF47AAC067012C85F6B8
-:10457000BA5C0D2F20FFBEE562039D6BC71AD232D5
-:10458000A89E18EEE579DB3ED70D190F20BD3765E3
-:104590009E4546BEBD8F4F65ED9BA2B2AA0B71FC36
-:1045A0007F9ECFFDF661D4EF62FAF947DB157F23DA
-:1045B000FAC5671E99E93390EACEE8A07C75AD0490
-:1045C0005B6492C7F73CC3CDF7AC23D7A21C958D93
-:1045D000376650FE56F5C3F2D281C857D522F9048A
-:1045E000C6072348EEC0DAA916EA9FDFACB5EA3465
-:1045F000D6EEF962FBA111C8DFB546F46D42E6DDE7
-:1046000057BCCE2A94EB78128FC31F9ECF75929C15
-:10461000EBBD01C98B72543A1DC9021D1E6ED939FA
-:104620001BE77D2247B1788B62FC7BBE10E751BE51
-:10463000F9C6F9AA0CB29FDBCBF1BAFB4A55465535
-:10464000DC79BFE08299E9798F457E84F2CB3DC960
-:1046500059822A303DA795A3BFCCD7F26BC44BC378
-:10466000F65ECEFDCF3D22D3CB096B031C4710EF86
-:10467000FD6EFF8924A73EAEE8FD409383F03C44E5
-:104680001E159F47F7CB9E3C84F611C359DA1F08CD
-:10469000372C8F467AA8D7BD5E455CC13ECCFF491A
-:1046A0008E74A594CE0158810C18C720B33D3FFEEF
-:1046B0003E2296A7AED4E201E73BAA3A58DD7AF44F
-:1046C000A5A410D53347D5BF3AC01ECFCFFD64A1F6
-:1046D000D3A1D2617CCAE130935E8F998327BF8DCD
-:1046E000E3163C27B138BAE0B9FE2BBA281EA03D2C
-:1046F000F3A0E7BAAA5762F3F4E927E02937F8896B
-:104700002A972BF6BEFD6492572EBF9E9F2CD4F2A3
-:10471000F6D2E7243FE17C6191C30C18AF273FF745
-:10472000D616C2E3C22549A3AC28F8C2E7ACCCBE7A
-:1047300051874375637FC0E930F7A3B8EEE5712474
-:10474000DA98C4EA1431C3C2E29EB8AA4826FD949E
-:104750008860B6E1B9223A7DB29FD3CD6EACDB5A08
-:104760001CC532D9F73B5EEE0FDDFDAEB9B7095877
-:10477000D75CC67DA4E1B8330D4F3E3D16E53B0B3B
-:10478000A1396351EF97C9D0B8CEE51D6248A57332
-:10479000C2AC98CB30EE2D02EEEF3507B75B26E1C9
-:1047A0003F17D52FBC9DEAA30743D28751ADF6B979
-:1047B00086FF7F026F5B28BF7D68ABF1397A8C85FD
-:1047C000FCAAA6DDF8BC0ED65D1247506BFE305A2F
-:1047D000A03DC7751B8EFC65F8FE38BE5AAF23FDA1
-:1047E0002496E0300A46A166719D42D75D04BB065F
-:1047F00091C92BAE4C0A911EC56C7E3E4C03219490
-:10480000448070E3BE71DD4F838787EF4740888F18
-:104810008D667A3911443C0D457D386D8C5F7C4C3A
-:104820000C5971DD923450FA913E9F2E0770307D05
-:10483000AA6EA4A7A5D79B293E9DD3E24BA500FE57
-:1048400076E6F7BE6CAA8F173C97C4ECB7F0F90771
-:10485000FFFB4763C85E65E9F17EB446C31DCE0722
-:10486000B6D4D83CA71ABF934DF294FC04EB4AAAE5
-:1048700037C5C0D377B37899E26371CB1DFDDE589D
-:10488000C24963CAC8B540381998ED2D8C8D5FB800
-:1048900072793E1F8FF5AA93E25512DB4FF50E2B6E
-:1048A000C349E51A5161E76396859D8F1F3627310D
-:1048B000BA7A4831F3B34A1304681F980B66B2B84A
-:1048C000CE550ED57650B6DB29CEAF8B884E661FFF
-:1048D00055B39B85ECB3D99BC6FC771EE918CFADC9
-:1048E000FD84B322361FBF7FDA2D84B6B0F8542F73
-:1048F00093FF57980416E712FDF1352FCF5B2BB3CA
-:104900007DF7D1B89A27ACBE951E2E83A8CB8378AD
-:10491000AA314516FC98E6FD9595DD6BD4E13E92F3
-:104920009CACBE50B6A1FC7566305BE85E4AE6F111
-:104930004C97A74E2E9F4638C5FEC366ECAF71F06C
-:10494000785CD38FDFF780C316DA12BF1EC99CC311
-:10495000C7C94EF2B3710C2FE4F726ECFF08787F3D
-:1049600089B3588EE2F34E13ACA67B129267D888B7
-:10497000B875911E3882F0B8C4EC75901DD2E6CCA3
-:10498000A5F55E16595C42677AA298F2BF97C5D129
-:1049900054C756AED957BA81E85747BA4984CA575F
-:1049A000DE63E7D3431ACEA294F7D37985F4ABD86C
-:1049B0001ED5E24240E4F73847498FFD637AD5FBC4
-:1049C0006BD648CC1E352D1C0F358D7F66F3D6383F
-:1049D0002219648F9AD7A49B09D72735B9AB1AB38C
-:1049E000261E467C54492EB7808FAAD5320BD1D5CE
-:1049F000AD02A3F5F56AD6FC29C354C8E7A3D6AA2D
-:104A0000E128366FFF6C3ACFCEBD94965D1967F7FB
-:104A100073CDAF3B653BF94D38CF4DF7304B927CB2
-:104A20009B989F727B9C6BCEDB44F734F3DD118740
-:104A300080FDF31FC949A573EE983B6CA1FE63EDA1
-:104A40001E13D18ADB3D9168C57C13A3CF61086F2B
-:104A50002FD4C08B76AA15386EAA5FDA67F1E27A96
-:104A600029395C3F175E7E2F9FEE0B6AB223F974E3
-:104A7000FE22AEF207935D5E14589E50FB92A8246E
-:104A80008D88E1AA967085FEBF58C355ED8ED71F5D
-:104A9000253FAD253C8DEA894BAC2BF7B3E7DBDA3C
-:104AA0004A818FDF4FB8D3CF7BA49B25BA57B36819
-:104AB00034AE43B43D87EB1FFBA7F07EB5909D233A
-:104AC00010B5503E5C27F23C01FD2993F288BA0EE6
-:104AD00049ED8E97B42EF517C6FAFBC2CDF01C93A4
-:104AE00066672B3B8F86E770FF8BAE79CD49B8B8F0
-:104AF000F0F2BE03E3A9BEDA26B829DEF7F0434D93
-:104B00006F75A42727DB27CB8BEA482FCE989EBA58
-:104B1000FD4DC3451D703DE87AA9336B7AD2FBB5D4
-:104B2000F123343D5483A6D71D43B9BF6BFEAD9F1F
-:104B300023FAFE02A97CBC8EAF79DAFE266A6D35B7
-:104B4000E2C657C8F0A5586ED6EA7EECBAF06A1BEA
-:104B5000BB37D2EDA9CBFDA8B63EC669A55F6ACC2E
-:104B6000CE51132CEAED9E7AB6862BC9CEE3CA0746
-:104B70008D83EF6B40FD2D7E49F431E551CD15B7A6
-:104B8000AED51475B0BCF431D14DFB2AF945F96DA1
-:104B9000B46F1D77D256C1DC3186EA8C7E4CFFBAE9
-:104BA0007C2503FCB7F5E3B80B933CBA9C1F086166
-:104BB000662FF555C1CDF3DCA885EE0F753F4D94FA
-:104BC000779E666FD1298C176E22797C32F937E097
-:104BD00039C8E4B11F5ECED6538F2EF78C88AD73E3
-:104BE0004C759889EF18F038A0E3F203ED3EE283AC
-:104BF00096D7591EACAFB34CD34BDC3A8186F49EAA
-:104C0000EBE8FC351ABFEE179DA91CFF25CD7F668A
-:104C10007C7A9CA51FDDC3E9FAD4F516E79706FD5B
-:104C2000E8FEA5FB936ED77FD5AF60457F96AF3E7C
-:104C3000AEED9BF94846EC5C207CD27967B5202E1E
-:104C4000ED867393E535D3865CB2047A79AEEB29B1
-:104C5000F179AC9E726793FEA7D9334D94074073E8
-:104C6000E6FEDCB8BCEC38DD77513CED0FFC7D0690
-:104C70008694F8F35CCFD7F4F31A7FEBBA7189E32B
-:104C8000EBD29533D4BF68CC927CCA232EE578D979
-:104C9000BA67A1DD3209E7AB3E1D2975CAB17AE5D5
-:104CA00096BF874517DD07EEF018EA85EAF3FB9912
-:104CB0007FD7406415D5B7956BDE2B1B4B76FF393C
-:104CC000E6E3C837BFD5C3CEBD339BEF1F4DA56C00
-:104CD000654B1EA31FDCF200A7D7F07CAEB2A5E89F
-:104CE00005BA8F3F9EA49412BEBBD60B6EAAB72600
-:104CF0006C295A710FF64F70DCD08FE43EBAF97808
-:104D0000D978AA1B1A44E62FCAE627E750BFD2215A
-:104D1000FA68ABF3C1BDE21EC2B7D9C5FCED987607
-:104D20004E34491C676F6B71627F0E3F2FF76B38F3
-:104D30002C696ACA37D1BA6D783EE1FE2B2C727BA2
-:104D400098EABE5D037C9B485F58A666228E4E0B98
-:104D50003CFF5E64011BE1EAA0145946F21F5CE6C9
-:104D600018D9480288576FAEE2753A8B2F5837B181
-:104D700075757DE9EB1FD2D6D5E7D1C775523E4593
-:104D8000E78726EF99E69FCFA13CE1CCD6BC5488BB
-:104D9000D3FB19DA17EAFB418C8BDB7AA9FF0EE70C
-:104DA000E8F7AB21D62ED2EE0D0F4AAD43E8FD2D2C
-:104DB000E6F127E2F3F2536D4936C223E6F1C6E786
-:104DC000123F4F308F373C47BF3961CCF7B5FA4EB1
-:104DD000AC70057A89437A9B98E79FCBB1A79FBCBB
-:104DE000117AE4F9BADF258ED7F3FAEE7B9623F633
-:104DF00084F731635D709DF5CF07D13058FBFD948A
-:104E00007C17C74F49F97C7B84EAC956ABDB8AFA29
-:104E10003D417E45EF015F13799E68035F18717114
-:104E2000E24FA37DE4870B8E70BF5BD02E84E81524
-:104E3000FBFEF58F8BC4FFC0460106087175D65383
-:104E4000EBE790DB5DF605560D44FECB5B059FCA94
-:104E50002454EC09F5D5818172DFF5D5BF5B57E9A4
-:104E6000F74C897A1F94ABD5573EF019F5CEEBF38A
-:104E70003D089FE2513DF57E3E186075D4C5E022A5
-:104E8000D68E6B6F2B198CF27F247CF0C404F21F3A
-:104E9000878BDD939C0FD6B39780173B465F9D852C
-:104EA000FA79C3EE7253DCB8186C60CFBBF1A2E1A3
-:104EB000F3961D7BC5C1C0F8774E40FEDD7617BD69
-:104EC000D6E8E57D1BB72F40327F3FAAD5DB0F2FF9
-:104ED000193B809EEBFB3DFB6D6E675DFEB35BEFA8
-:104EE00077527EBAF7C7693BC7917D535C6E82D11A
-:104EF000C20D220446633EBC81C7A1D336D70B74D2
-:104F00005F7A7AE39D19540F3E2075597C38AF6F54
-:104F100057B993EE41FED71C75BAA945FE30C96159
-:104F20000E8914FFC64F07F61E707CD80CB287BDE1
-:104F3000A267381977DE1C0A237D8EDE0FD2B97D79
-:104F40003599BFA7D7DEFB3DF06B7E9FD67D7FA254
-:104F5000DD234CD0F6FB5FB9A91CE7DAF39262FEC1
-:104F6000FCD4C6EDB368BE339B2537C97B71B3C48F
-:104F7000E65F8C75BC0971781AF146F16BF1FBA202
-:104F80008F207D662BAF9317236EE9BEB86689A488
-:104F9000585C3DF158A2F3ED14587DADE372B112A7
-:104FA0002A657AD7F069C3FFAEE191D10FDA579144
-:104FB0003E1271FAAFD6FD35B9BDD7FD8938D0F5AF
-:104FC000A5E321864F60B8D4ED9EDA3E72D26036FA
-:104FD00040657A54274301E5054D162830130E4CE1
-:104FE000C93EF2F3069B7304DD337D9AC4DB474D63
-:104FF000EEB7A85EFED4244B02B6D15C0F1BFFA80F
-:10500000E89B4AB4941E65F70362894931D179D788
-:105010006465F12231DEACC9E571382B8FC79B2D59
-:10502000B96E9E3F423DCB1FF416379845F949793A
-:105030004AEA2732B23CBD79C66C33EEAF7C42EA15
-:10504000B21CCC2C9FDF7CC76C7AAF5B3E3AF53547
-:105050002FD2A1DC59BCFFA6D42209E9C646FFEC39
-:1050600029D8BF2B57792AB728B68E3E2F3E7F8688
-:105070009EFF7640E0D9DCFE749ED95753BCFF48B2
-:10508000E8AA358931FE3F0870EC0D21464725C856
-:10509000A67C7A4B2EB07DF4D59EC9557E9ADBCB8B
-:1050A000F32A8016D26395FADBC394AFE1CF6F4346
-:1050B000BCDDA1E1ADCA660F132E60B574BE1B172F
-:1050C0005E8A4B2E33F9F72CCDDC7798C37B69FCD5
-:1050D0003068769FB4B15470E3B5B4BEE33C3A2671
-:1050E0009CD4E7C3FD7D24E17ED1AE8282B6469793
-:1050F0001250C91518DF849DBFFD8CE66D52219AB0
-:10510000C4EC50E1A6F3488080E91AB63529880737
-:10511000D4D3D2D72EEC27F83FA8E75399FCFB8CC9
-:10512000651A1EEF8828CFB4A150A782909E8BB637
-:10513000BE006F5E34E3BA674C8183A4976AD3DB09
-:10514000D94B65F2DB2627E52F175E117DB7E3B853
-:105150006A2D6F87AB62F8567CDEE919B6696D1C63
-:105160008EFE98CBF394F39E70F6728A1F1E5E77C4
-:10517000C2D57DD9CB917FBA7746119D4B4F81F235
-:105180007E6EDCFBC559E6DEBFBFF8FD209E77C012
-:10519000667EBE5ACDA03A52590B4ED4C70C94A588
-:1051A0001869096991BD8F0F313B129F93F214F971
-:1051B000FE4CFEBE06FCE48FBA1D75FBF4B01B8AE4
-:1051C0004CF9B9C90612F9CB30D8E826FFD6ED372D
-:1051D00055B4B378B3F4357E1FB7548836A711FDA4
-:1051E000329E97A42FCD2F7B9E9B5B2C648A451B00
-:1051F000EF67F1498F4B32FE47F8F94FDD4B0A79E3
-:105200000E9EAF8C849184AB2FCB77F4B884F6B12B
-:10521000E57D1DFB908A70BF0BB5B5A78A15B299C5
-:10522000F4D2DFE6A3B8BCF4B91C76DEC1BA1FB075
-:10523000FB0F9D0F36A6317CAEF288CC8E651D83A8
-:1052400041C6470F760820E339777B471AA39D575D
-:105250000632BAEC67032653FEDFFDDEF267431920
-:105260007DE685436302FC7EC54672F84197A3B094
-:105270009DF2A1CB769403EDE0B7AF66F7857EE8AB
-:10528000AE63846B02D18812F2274552B95D6C8DF2
-:10529000CCAFB57D2D75733B2E3DC8CFDDA593F802
-:1052A000FB3DB33ACC4578903A450821FDCD836269
-:1052B0005118599BB4B86CCD34811C678F243919AF
-:1052C000E4B8FA0D54254275D25C0D272905A9864C
-:1052D000FEC785804472CDB52F60B871F80619E617
-:1052E0008B649776327D04787EABE309C4F36692D3
-:1052F000F3938902A4212EBE3917FBE3E695265EBF
-:105300009A22B0D69817A35E4E5C0F4F33F3B4F3D6
-:105310006E180C63784AD00FFA07CB3F2FE3394E53
-:1053200069136617CF4C447A4EA7042199E59BCCAC
-:105330007F2E2B29ECFEBE45D3938E3BFF50702869
-:1053400038AFABD8A8B77E8A516F69D38D7AEAEFB0
-:1053500037EA65C05CAFA17F60E01B86FEC18B466B
-:1053600019E8ACFAF106FE1B1A261B688F7A9B819E
-:105370003F67F56C039DD77A8F817FE8862A43FFCC
-:10538000B0D06243FF8D5B971AE8E1ED8F19F86F9B
-:10539000EA5869E81F195E6BE81FDDF903035D1425
-:1053A00079D6C03FF6F02643FFB8E88B86FE09A702
-:1053B000B719E85BBA7E63E0BFF5CA9B067A121C98
-:1053C00032F097D8DE33D053DD7F35F04FCB3C6ED3
-:1053D000E89F219F33F4CF2CF8D84097F9FE69E07D
-:1053E000DF3828F02CC59FB9A6754755A0F82C7F4B
-:1053F0007F22E2F9AE74B32F4C4C5FB36EDBA4C7CF
-:10540000410DB79F80FD3E93F7CBE3E0E35A5E305A
-:1054100055BC1DE8BEF772BBC070DDD7F9ECC27C8D
-:10542000D71CB78F7E8A0D0BF0189D36DD6DA0FB63
-:10543000FB330DFC03E6CA86FE81810243FFE04593
-:105440003E039D555F6CE0BFA14131D01E75BA810E
-:105450003F67B5DF40E7B5CE35F00FDD1030F40F14
-:105460000B2D32F4DFB8B5DE400F6F6F30F0DFD4B4
-:10547000A11AFA4786571BFA4777B61AE8A2C80658
-:1054800003FFD8C32143FFB8E85643FF84D3ED069A
-:10549000FA96AE0E03FFAD57C2067A121C34F0978F
-:1054A000D8FE60A0A7BAFF62E09F96F981A17F862F
-:1054B0007CC6D05F7D0EE147F9F31B027BFF35B35D
-:1054C000E092A15F4AC73C9DEEA721D9270A3DF390
-:1054D000743D7F2BF37D6658E751533DFB2EEE5311
-:1054E00013CFEB6CF9FC7E0BF3779B8DC5593CA178
-:1054F00086B3AB9646CA4F5DAAC07047A94605BBA6
-:105500002F4C67E72A3B1A65FA0E0DF31B24524D08
-:105510001E0FD50F29B13C74C8B5D15F3D0FCDC862
-:10552000078EFFFC404A7E11D563AF96527DF22074
-:10553000A8AB480E3C5F5DF49EE99D24E3BD91DE7F
-:10554000CEB0A1FEE2D63B98D43A64D475FC768600
-:10555000ED3CE3EF9E57BB5712707F4BE3E67F02B3
-:10556000EB26339690AD41F42FF4D31F04DD8C7EEF
-:105570002A98C9E8A783326B37040B58FB6CD0C755
-:10558000FA37068B19FD7C50617428389DB59B82D3
-:105590007EF67C73702EA35F080658BB35B888B5BD
-:1055A0002F06EB59FF4BC10646BF125459DB1E5C58
-:1055B000CD9E6F0BB6327A477003A37F150CB1B640
-:1055C00023B895B5BF09B6B3FE9DC10E46EF0E8652
-:1055D000191D0E7632FACD6084D1FB8387197D20A8
-:1055E00018656D67F0346B7F17EC62FD6F07AF30A5
-:1055F000FABC76DF5F926F7CAFA6D30053181EF41F
-:10560000BC7616D52D048E62E9A2A16E49A81F12A0
-:10561000ED71565B479A8CC736E53983F23735C54D
-:10562000E5FB7768EB3D9E0C6A12C6BF462AE61181
-:105630008A8DA9106A62EF5779DEBD50C325A4F3A5
-:105640007C7B8126D742CD1F8A089F050C9F6F7FE8
-:105650009D3A49AF93834302F3F2B15D9C6552D901
-:105660003D813D944F79FFA621812AC2EDE5FA07DD
-:105670000EB0F5DCBE7C5AA4CC1AEE7F17DDFF1C01
-:1056800014D97D695FEBD5697FBFD067FFEE3343E7
-:10569000E81C9AFE85C8EED3DF911C73E97EE49185
-:1056A0007CFE1EE3917C93A11D96E57F98E43C95DA
-:1056B00057FFC2C3C852B124CF4579EB1D545AA33A
-:1056C000DF97832CB1EF6341798B3E99FC262676D8
-:1056D00044DF052A6BB70F0EACA0F177630141746C
-:1056E00060BC35BBB7FD24CAB34AB3D3AA7C93A12F
-:1056F0002DCDF2B7D07C27F214833CCBB364EDEF11
-:1057000064BA9E27B9FEB1EBD2492127A66FFD5E90
-:1057100062D524EDFBA92582FE9E9AE78336D0F35D
-:1057200041D65FB18CDFCF7C0BEB327A5F79448B53
-:105730008797EB25162F2B84641FE5D397EB970DE6
-:10574000A5FD24C6CD0A1C67C27115C0BF87A83845
-:1057500092C2F085F301BD77ABC0CC9DEABFDA2CD5
-:10576000FDDE236AEFCFE551E83DECBC9DD636AABD
-:105770005311279B591C1B27AA16AC93DF3185F2C6
-:105780000591E1C322A0BC0BD3111FBDE4053A0E65
-:105790006AB5BF8FD19F23BE5EA1F92EFE7A6C0140
-:1057A0007B6FB27B9C4CFA6B32A13DE8BEE6772260
-:1057B000FF4E82AED8E93B0E57611BFBCE9F92088D
-:1057C000B2D738077B1FB2578486577B899FEF6A11
-:1057D000387A27539A1E62F31ADFF3756A76ECD48F
-:1057E000EC5BF6E6C1AC4771DEDA4E89D53B30267C
-:1057F0005AE8EFE5FBA6BA86430373E3F651D7F107
-:1058000001FF2E0AA285F1DF439DD2D6D7F1245A9B
-:105810001C81367BBC7CDDB87E47C3F549CAEB678B
-:105820005965D75D38348AAA09631BF8899B7D576F
-:10583000A77F5F371FFCAC5D8870201CFBD5F5ACE3
-:10584000FE5D0CEDEC796DF1FDD944D741D7944C58
-:10585000AA5F5637BE9589D2DDD9BA7E2ADD3FCF01
-:105860000E55BE456DF966E124D5DDE8177FA3F539
-:10587000A3427D0B95A4F7BC34A985EE796789DC3A
-:105880000E7088DB0171A488A93DF7877E7052F302
-:105890000326BFEE07152B397EF4BFC7E8F68BE26F
-:1058A00087FE3698DE7D98BBD8772175BBADA9847D
-:1058B000AFC554798AF179A17E3EF3BCE021CC0BCF
-:1058C00088EFACC4ED7FF66812FBBB97B302E263CE
-:1058D000544FDCEB79E6A7267EEFF6A8885B14A987
-:1058E0005E7E92E969912D3482F484E7330C255C65
-:1058F0001F6F5F3592EEFB2687B2295F955EB4FA83
-:105900009A3C86380FD75262F7784F48FC5E2D518B
-:10591000DE1E794BF181CF289FB05A40A5F749E8A8
-:10592000FFDCEF8F71F93F3505326F1679BEC2EAA1
-:10593000E8217E56FF4386CDB756E8B97EB3B66EF2
-:10594000E7E7BC9E56B3807D8F932887E0E6EB2681
-:10595000CA634DE672E8E74E4F79B81D74790A863E
-:105960007AF8FD7DB6C2F6DD68EAC7E2D747626025
-:10597000E8503A2FB5FB31BD8EEDF49C62711DAE3F
-:10598000360DE1DFF786FB3A4FCF77D7CFDED879F8
-:10599000A7DF33C1C4DEEF05FD36B744769B0D3E6D
-:1059A00016F787C1115D3FEC9EE9FF019ECDEE1811
-:1059B000B0390000000000000000000000000000FE
-:1059C0001F8B080000000000000B7BC4CEC0F0A3BA
-:1059D0001E822538106C62711D0B03C30756D2F569
-:1059E000C17025507F0910E703711610A7027102DC
-:1059F000104703711810BF069AFD0C881F02F11D95
-:105A000020BE0EC49780F82C109F40B277191B035C
-:105A1000C35A36D2EDFF83E4E78940763910CF24AC
-:105A2000231C46F1F0C0F23C0C0CDABC08FE3E5ED2
-:105A30005479051E047BB92065766D03EA0700E9F9
-:105A4000CD424A800300000000000000000000007A
-:105A50001F8B080000000000000BD57D0B7854D58B
-:105A6000B5F03E8F79253393C9839040C493970452
-:105A700009382421F2AA1E0842A4D406F42A5AAEF8
-:105A80000EC823869044B02DB7729B21092F411B6D
-:105A9000152D5AB483458B0A36F268D106EEF028EC
-:105AA000C65BB4D1A282D536D45B450B4944116F95
-:105AB000B5BF77ADB5F7C9CC393349406BFF7BC370
-:105AC000C7B7B3CFD967EFB5D75E6BEDF5DA3B76E5
-:105AD000D9C6E42B19FB027FA09CA330C60644CA9A
-:105AE00051775EBB687B09FCFE99DDFFB8166967DC
-:105AF00094173389B1D1F09E653056CAD8954EF8C7
-:105B000015DA95BD70EA0F97A531B69F29CC018FA4
-:105B1000C26A59EAB7A09FFD9F333FBE975F706787
-:105B200075B8F1BB2063E98C5DC1F877E16C2DCBD2
-:105B300057881526E373DD49BF433FB99BEAE0FB75
-:105B4000B39FBAE97B2B1C46C93E9759587CF34555
-:105B50000EF6AB7EDC5120EAD90C066702DE2C1A69
-:105B6000D780F7D0DBEF11BC075480578B33BE13BF
-:105B7000E04F8BC0BF9F5D9BC40A39FC7A6904FE6D
-:105B80000B8587E60F786EACD7BE9997CFD8BA7AD7
-:105B900046E5DA7A2795ABEB7DDFCCB331B6B23E82
-:105BA00083CA46153E01381AB7B0501050EF2E8404
-:105BB000F646FFF03F21CF69AA3BB37CA6BA3D0D64
-:105BC000FA2988D455B766AA37BA2739036E1C1F3D
-:105BD000E6EEC0F19D5402984733001F978A79BAC8
-:105BE000B4E02C06EB91E7B66B2180E352F782E933
-:105BF0006C24B6CB27BCD9055E9764367420BC1FD5
-:105C0000433B06F31DE69EF23EF332F69FD94FF07A
-:105C1000796C606C203C5FFDEF751D12F4B732D3D8
-:105C2000AE35407F4FC0F86B1C5178DCAAFEB9033B
-:105C3000FA74C23FC4E3D08DBC1E9937D4A3E631B9
-:105C40008C45BDCF8EF473A1FDE6379BEBD67EF37A
-:105C5000347D12D2ABD16F3EAB68F0B9FFF7F67B63
-:105C600029E03C3525D2AF314EBFFD023954C0B7D3
-:105C7000F91B59289C1D3B4E9EE62F0FC2FBBC8D85
-:105C80002A0B65F3E769C01779FC57D6E49B94109B
-:105C9000288C8587458F93135997BC34FB1C19E8D2
-:105CA000292FE3FA4512D25573D4FAE63066F0CDC7
-:105CB0008FEA7D4C1FCAD8DDF505546EA9F7E9C8F7
-:105CC0002777FF5D99D55218CB8F7F11F2EA1E1B03
-:105CD00023FA0B3ECE428F4BD85FC5AC39505F3FA5
-:105CE0002ABDE82E8D885C4679E61274BC5ED26EC1
-:105CF000C8C1F6AF280CE5A0951FEEB6E9D3B0BF3A
-:105D0000B5A364A901F19CC7F921CF1676E662BF5D
-:105D1000CD39A382D88FFF55E287BCFC4B3405C632
-:105D20001D9627F861F4834E94873DF35F96AEE7A6
-:105D300015339664A103DF79D2816F42DF74F07569
-:105D4000F1C3D7475FCD7DD2D77AFF7DEF3BE0FD32
-:105D5000963CBBA664C7C295797138A3C21D4B6F30
-:105D6000797982CEFC7DD399B57CB03EC4DE011A30
-:105D7000BABF3E83E8EEDE7A8DCAB5488730EF07BA
-:105D8000B0E958A8231DE2B8D71551BDD77D8BAD1A
-:105D900020BA4C9FD5CC50FEDE8FF4390E875BA91C
-:105DA000EB1360AE79A20E5BA40C7BC0BDF87E1035
-:105DB000D575DCCAEE928CF6CF0675C0778A683F3F
-:105DC00075C5B3C146F8FD7E17AF5FBDA2530F6620
-:105DD000457D1F5CA7EB5991F6500F4F52A3FAC3B4
-:105DE000FE0BA3E13948ED8DFEE6AF38A10701BEF9
-:105DF0007B5DBCBFB52B8EFD53FA5F2B053240B5E2
-:105E000060AB2CFDACEDA9DFAB231E8C7172A45FDF
-:105E1000E8C1E8F7C16774DD1D797FB9746F10DFE1
-:105E20006F64157912AC43E6F48A0C06EB6FAF6829
-:105E30000EE296DB039FC077647E0F12BCAE0CFEB1
-:105E40007EC48ADFEB8D51EB3369C5CB4184D7D05B
-:105E5000731441AFF20B594B8F00BD2A49763FE9CD
-:105E60001BD701D364C278B32A980670C969150C90
-:105E7000E58192A6BE1BCD0706FD019C6309CEC934
-:105E800015B37A8133180DA701477F701B70F44E4C
-:105E9000A77C7C2B3D4DBA66CCEF26C0FE6D6FB75C
-:105EA000F9515D48453C4157ECF35B8336789E3AA7
-:105EB0001370ADD1BACD62B9B1FDA64D1FC4425128
-:105EC000FBF73F7A5DF3B0CEF116885E5FA8CF9501
-:105ED0000644F03856B4B3D29F313F5BCCFCAE35AC
-:105EE000CD8FA9818C0A4FFFF3BBD7E59F55E18E7B
-:105EF0006DF75B49A2F1274D19F36DC6C7630E908C
-:105F00005FC9385E5164BCE469301E76A636C71D91
-:105F10002F65328CE7FCFAF069E547035E7B0CBC29
-:105F2000B79AE05D6B03BE8DB3FE5F37BCE7CB7FF6
-:105F30002E90BFC47F797DF3DF3FBABF64FC153E6E
-:105F4000F94865E12B015F775CE524FDDE9073FF86
-:105F50006C7CA5E2A7B07E77BC547CE24A192B404A
-:105F6000D72322E3D74A1AED57BDD1776FF3810DBE
-:105F7000D6D4CFFFAFF9F486D7AF5B0E9DAF7C6D63
-:105F8000783D81213FAD2C642107F4B1B2ED2AB2F6
-:105F900037571E291BC8A05FDB9AE14C8749256350
-:105FA000FFD0DF4A43CF985CD24FFF5CCF00FB4E5F
-:105FB0006F02A56BB7B782F4A29512A3EFD783DE69
-:105FC00016023DA6E4950DCE3958F7EF70CEC1719B
-:105FD0006D8CF4E992570EF9CA80CE5D23524629A2
-:105FE00040022B5DC6F3A3E5A8E7DE55289E7B782B
-:105FF0007FF0BC02DB2788F6BDC1959007F044AD69
-:106000007FA2BD395011477FD76599F0F390D0BB7F
-:10601000EE46BD0B047262424B00F56A57BA5D7BD7
-:106020004C8AFDEE265912F306BD0DEDEC115332EC
-:1060300051CF3A30E389157684AF90915C77E5854E
-:106040007419EAEE02CEDB0F59F67D37AE21E95D19
-:106050009952994ADF99EA77F7E831D913516FF3EA
-:1060600016F0F7650D574C6C8C7ECFFC1371FF3525
-:10607000DE071A4AE97DA6B3E2D804183F13E468A4
-:1060800023E02B536D96EA685DD3E2EA8F1BE63B73
-:10609000678500860D331ECC9E1F673F81D534F186
-:1060A000E9A079663E7B48E0EF6E81CF4CE4F5D104
-:1060B000820E41BEB978D31EF9E61ACAE55B4241A9
-:1060C000F30AC4F7A079CC8FFAF686194F90DE6AEE
-:1060D0008CE32A30CBB94CD53CAFAF6B3E1B99FE5D
-:1060E0001D7974EFFD5BF96C230BDC8AED33C57E03
-:1060F0009E5010920285FDCFDF3ADFDEE6FD2DC413
-:10610000271FA74E1E103BCE3F0B2F996E18A7E4FA
-:106110001F3F4EC23CB3BC3C5FBCC33E20E88C2951
-:10612000B81F58EDAB84129FC464AAB6A31D4EF2EB
-:106130001BE0F6B0E6F24B80DE522B56DD2E83DDFF
-:10614000EC79EBEAF7D1CE4EED9843F676536151F8
-:10615000DB246897E4F7CD984274CA08CF6BB1335B
-:10616000E2BBAA1513615E8D8CF3DD66F996895C3E
-:106170003FD069BDBF2B70062BAEA950477665395D
-:10618000F1E66167613E6FE90B47ECF7BDCDDF16C5
-:10619000F94EF8FF9690DFB4BFEFD8743BF9118346
-:1061A000F00FEDD2644B3F49BA3DE2676488A7A87F
-:1061B0003ABCFF6D0F5FDFFE4F19CFC7EE736A4029
-:1061C0000AB63CD987F67A12F325AB2867278342B3
-:1061D00000A2D897D61D94B5FED7A589B1F29642F4
-:1061E0004E7733A2F4DC0E99EBC969332767AF848D
-:1061F0007ECF9670BF70AA0FFE17C5CE671DEC6BE1
-:10620000E1283FC7BAC2C7887F1B819E72802F8258
-:106210008532F9B7D7E6EDF045F3B5AC18FE6D2B36
-:106220007D304D2D15FA1FE047C99375D7C8AF4E85
-:106230001FCA97A48FC4E951DFB10B5FAF24E5C239
-:10624000E8E3AB8E67AC6B2C5F71FD246DE63C27F9
-:10625000EA3BAB326626C593B3BDAFEB7DB4AEA8C7
-:106260004F84E2F49FA64871FD39567D9EB1A5A6E4
-:10627000F5520696CEDADCD7BAA599F161F4EB5A5D
-:10628000A668FF85C24BF5915FDC29FA5BABDD1791
-:10629000C4FDF32CEEED800FA5795418F53D96C79B
-:1062A000FC8FF326A487B8343D443A24CADDD208D3
-:1062B0007CF62CD9349E9A9660C2379B05DA761408
-:1062C000FCAE657682C389E3C1388A0F3A94D0FF69
-:1062D000CFC22E2FF548FDE1505FE462FD4E131D45
-:1062E000ACCE2A8ABBDFA9625DD16CE5F47AE7F90E
-:1062F000C917EB78D799E13DEFEFDCAAF66E1CFFEA
-:1063000071EC772A7BD7C01720F1961E7AE7EBB4A1
-:10631000CAC6F64849200F32AE67010DEAF80A36C0
-:10632000EB35588E453A2CF2915EB05552114E62C3
-:10633000690DFF737DBE10955BE84F7606084F8AA6
-:106340005B67D45E3B3F7DFF9CD0AFD3843E6FBC88
-:10635000FFA162A77E5556C1D06E3EF7F6D40CEA77
-:10636000578747A51138ACFD162A811F2A0390ECE8
-:10637000383CF801FA09584701F9B5F305CECE3D8E
-:10638000303389F5C15F0F59F8EB2189C3C92ACE93
-:10639000CFCE380763B6637B359040F1B29305C426
-:1063A00007B962FC27D6CF4DC0F19FD8D8379F1BC5
-:1063B00070FCB4DEC9C2A0A786EA7D541AEF43C2BE
-:1063C000DFBF59D831C6F3738A4C70EC137CFF845D
-:1063D000B32281FCE7076F9C360CF82BE7A8E24755
-:1063E0001D4F5BCB52FA1A3F3B68E637A6CCEE1343
-:1063F000DE656F4D9C71288A1F7FA178D2DE1D0E4D
-:10640000BF5CCE2E47FAEBEFFB73F5FA8C43F95FD6
-:106410001D2F9B85FD79AEF1772B48CF095F49FC95
-:106420009923E448CE3C2E0F72AB594843FEFDFC45
-:106430000B164D1F6099109E32AB558DFC4D4C775D
-:10644000CF81F743C5DB4C65BA8C5BF850D4BF50A5
-:106450008E6CE2FE73C3CF0FEB7E17CAB9CDAF29A6
-:10646000640BE7556A0DB8DE39EBCDFEFDC12CCAD1
-:10647000EF8EFE7AA1D7655AFCF85F751D3A701D44
-:1064800012FFF9EB105219D19D51D72456116FFF0D
-:10649000FB44D0A9B6E210B743C0F87B272A1E01FF
-:1064A000EB99829BC04F83F74D44BB35B886F9F317
-:1064B000E3C84B9B9A48746F637A7828FA0FE65CBE
-:1064C000DFB117E5D50466925F71E4864DC5EFD262
-:1064D000B8DC080567F2F27385E265F9EB5908E369
-:1064E0005B9337D4ED47BF5E6635B79B33D7042542
-:1064F0003BD473EA981F87C9AD64BCFD6C16D27992
-:10650000BCE66806D0CD104137430C7A5966A69791
-:10651000C17596B8D01A737D20D2057C37D0422F32
-:10652000D67E723446F1B8BCF5328F17CD32C77DB6
-:10653000F259F7FB3F0778F30FB9FD61161B6FB2F5
-:10654000F6AFB24001E265F70FDDFF590013FCD949
-:10655000FA49A98817902749244F2AE2DB3D31F4F4
-:106560006AE81BBDB48FC84FDEAEB7F7ABF2D39766
-:10657000CE0538D67A7446E307B349AE2B225E794E
-:1065800030F37A6707FA6DDC4524DFF7631DFD3CC5
-:1065900019970C8C96F78AF02319F546E147B28ECD
-:1065A0003755E57AF07B4C9F8A7818E50864605C83
-:1065B000CF9691BE730E8C67F381BE15E7BBB16AAF
-:1065C000029FAFA6FE2D1AFFB071FB481E32BE1F00
-:1065D0003377CA79E1A3440DDCA442199C04660414
-:1065E000D27F0E0B35E2FAD635F3FD2DD2EE16D161
-:1065F0002E8879053DED02D06E84A9DD3C9C0FB458
-:10660000D34DED2A62DADD26FA63A671F598716B37
-:10661000447FA4CFF5B4F3C7F4B754B4233DB0A777
-:106620009D16D3DF3231AE6E6AE78B69F7EF067CD9
-:10663000A6719979DC9EF7A576E33DF9630FE44FE7
-:10664000217A39943FA57C2E8CB3F4451B97115BBE
-:10665000793E874157FB45BB26A4AB42CC5B6163C7
-:10666000AA294F85E7AD34BA673A0351CF7BE8CA10
-:106670003DD317FFF95C537B758D8BE9C5F49CDA2C
-:1066800037FD5D11F1AA1F4C427FEBEA3459F8DB6C
-:10669000AE69D05590630354537D4D86786FBBA689
-:1066A000810262223E02B2F29B8551FCDD33FE3F45
-:1066B0000B7EE13F8EC03FDB02FF6C33FCA2EECCD1
-:1066C000E4EFD595B327E17C0CFFF2D9A6E50D41A7
-:1066D000F7FFE6F95559E65765995F95697EF69596
-:1066E00055938279FF97E6B7CC32BF6596F92D3383
-:1066F000CDCFB972D905AD9FB5DDDDB66692B76B6A
-:10670000F35F27FD7FAD88E326ACD41B56E07BE02A
-:10671000ED76EA4F23F93E8AE99FA33CE8EFBB47B9
-:10672000548DE482D323935C60F9F6507E36876BF8
-:1067300026C885E7541F97DF02CED72CF50F2D759D
-:10674000F8E56FB86FFA9861475AE47C3FFBDACA04
-:106750004CBE9FACF2F8E5E87D4D15B83938A094F1
-:10676000E44FA38FCB9FFD03843C4A837D8DFC4483
-:106770001924AF6C425EDD57CFF3D89A457E506343
-:106780005A11E1A759D80B2C9465DA370F4C9CD2DB
-:10679000867EAB334779DEE23A1BD7C756D6339DA8
-:1067A000E8ABDE49F945FBA0DF003468057D0FCB7F
-:1067B000E741DFC3724F7D0695BFACD7A8DC01E38C
-:1067C00062F94CBD9F0560FC6DF563A8FC31EA8B56
-:1067D000503E20F4C52BD264F2576CAE872D339F08
-:1067E000F4482A1FA9F78D5561BC9FD46750FD233B
-:1067F00069E6581BD9AD1D8D4900E7EE57F3285FB8
-:1068000069429A4AFB2F53C34A5249E4B981D78F50
-:10681000A44957E077E33264DECE196AF4C66F57B5
-:1068200086EDC664A8040F7307156F5ADC76E5364B
-:10683000C04BA95BF4E70B347AE2F7F72D6C57E411
-:1068400016FDA5698DEEF8FDCDC47147FA381E58C6
-:1068500046474362FC763760BB429F986F56584E5E
-:106860008C3FEE6C1C3725A53980F1AD2B6733D2F8
-:10687000476D69DA66292A3E141A50C164A0F39460
-:10688000D4E63A6CF78D809FE5C0F89AD7CF64A024
-:10689000679B1BDE17624E138F478DBF0EDEA33E34
-:1068A0008CEF4744BDC7EFA11C3B4B7C9F647EDF50
-:1068B000A397AF613D793C98BC646B32D79365CEAA
-:1068C0009FCB571E98847C9F6CE7EF7F8A75D4B767
-:1068D0009633431EF1F609FCFD8F8CF65EFEFE1723
-:1068E000A27D4A0A9FB76B8A338471B147BE7B4948
-:1068F000E6DCC2C87C2FFA5EC1B0B951F37BE47B01
-:10690000E332E7BA23F3B9E8FB1386CDEDC3EE49D2
-:106910002D977B7264516E25371792FC1CE5A820D9
-:10692000B9336A60A98EFCACACE770FD87EDAE862A
-:10693000863C822B88F2C680EB278BCD700DAE3162
-:10694000C3F5931A335C836BFB866B9D8DCBB5DEF1
-:10695000E083F1F5E8F11FFD37F3F8437E601EFF99
-:10696000D11F98C71F72E7571E3F1CBD2E9B6E3765
-:106970008F9FB5C43CFEA625E6F1B3967EB5F1FF28
-:1069800051FA78922D70C426F45D255AEFAC0B981D
-:10699000F45368F78A681754A2F5D840C0A49F4200
-:1069A000BBD76D42DF35B5AB8869F707D11F338D93
-:1069B000ABC78CDB21FA0BCBD1FDF963FAFB8B68FB
-:1069C0001794A3FBD362FAFBC080CFD4CE17D3AE0B
-:1069D0004BB463A67199795CF82950A19FEFB30479
-:1069E0003FFA47964D5E4371AF812C20A1BFCF97F0
-:1069F000CA461D82EF592ECFBF4F9EB2EC62B43B08
-:106A0000D7249BFD5CE9766E9FD9EC0A95BE44566F
-:106A100047F900CE60E68CA87C8B6A3BDFCF7ADE3C
-:106A2000BB8399D746BD1F28BE5F23E2D469F6D247
-:106A300046942BBEC1D03E8EBF22538C6BBC67697F
-:106A4000FE761DE0DDF8AF3347A3BF2832AE8DB729
-:106A5000BB588C9B151FAE35D97CDC45386E213E6A
-:106A600037F48B6026E1D7C74BE3F9839EEF49FFEC
-:106A70000578593DD9292B49F07E3DF76F1A7EF6EE
-:106A8000647B9D13F3761B2F92D963D82EAB6F3F97
-:106A90004E53BDD9DFA9FA2A74B4F70655FA8A1401
-:106AA000D6FB770F97CBE5F1E20DA3C5BC9A2A2759
-:106AB00035E7C1F8EC90D96F0B84CDA2F3610A954C
-:106AC000C0687B3CBF6D538129AF3E7950DF7EDBD0
-:106AD00046A15FF4CC033A8AB77E370AF8D8C602DB
-:106AE000939E959C3293F4ABE486AB9DBE38DFADAC
-:106AF000B5F4EF6233756C9798D6CC64EE5C34E9EC
-:106B0000614DBEC7F83E94093209E33F693BC2C8F4
-:106B10003F674BF8790A3523149428CEC1E7896A78
-:106B200025FE24AAE1A00CED076D54593895B1FB60
-:106B3000E5C08D881F575E33F9C7549F2E219ECE26
-:106B4000D94257D379025017E3E57FCCB3733FF0B6
-:106B5000C3DACCDF65C759C7DBEC9A492F1DF4A90E
-:106B60009D858B7B6F1F69C7E1EAA1D30CA04FE421
-:106B70006F8DD3E9ED8ABED84EFA5A968FFC8E8679
-:106B80007C35F85FC4B7E78E61E247BBE10F308F19
-:106B9000DBDA6C3CBFEF73681D15F7B94DF8BFE643
-:106BA0008A78F73C56E1C597A7995C8E7C759ABDAB
-:106BB000EA2D8E5AAFB5763B1F678D8DFC5B463C48
-:106BC000777EB3CDE4EF5AB8D15C5FC066A6A35C14
-:106BD0005AB0C1C6F07CC76D167FD8BFE17C615E3C
-:106BE0000B59DD2AD4D38DFCA0B93EA662FEF7E294
-:106BF0005F3D528A7943CD769EAFF301D08B16C5A7
-:106C00005755EE901DEDF97776155F3F9EE1F7A1A0
-:106C10005583509E26B3B8E78C6E5D6386AF3FF810
-:106C2000ADF032D640F0F60687BA558AEBBF7AD47B
-:106C30002E99E244CB9CDE910CE4CC39172F7BFCDF
-:106C4000297F74917CDF27E80836C0CBB89CAFBBA6
-:106C50001CCBFEBE3BD8CB778B9D1D76E48F5AB5FF
-:106C6000AE5C92237126872DA00F86EF6C7B268663
-:106C7000073353BB35E7D9AE4DCA39AF76E5721F3E
-:106C8000FD750A79F9C2B69FD9D1BF78FAA913D791
-:106C9000201F2EFAB5C29CD0AE739B8785715F50C2
-:106CA0004376942755BB94B871598AFCC3FC17FDF1
-:106CB000C24372A26A8723341DBEAFFAE53B231993
-:106CC000E0A1B3A1FBF060DC479F92787C34D8311F
-:106CD00012F7AD2A95DD122F4FEC84A0BB53CF25C0
-:106CE000CEC27595B6EEBF99FA6DB9C1E688920F1E
-:106CF000C7C4BE04EDB87FED4929941F477E18F143
-:106D0000AC534F4A1CBE3DB6900BE1DBBAD91E0016
-:106D1000386AB77E487454F68BED5EC443ED1EC5E9
-:106D2000E4F7ADDDAA841D23A93C8125C65124E0EA
-:106D3000EB1AC6E563CDAEC5E40FAF6959F7A1E222
-:106D4000C5EFCDF40C78F18711AF6F28FEE958DF5D
-:106D5000F973AF06A8FAA0FD712FE215FA9D634FF3
-:106D6000C278AED98F8DFD7F9A12DB1F63DD76A4CA
-:106D7000AFDA96B57C3C0BBF7C80BF64C6C64F9C27
-:106D80000E4B1C6B6BEA79E9898BB69F7D3408E367
-:106D90009DDAF1D74783B87FFFBF8F1EBD13F59AE9
-:106DA0007D2E1FF27BED53AF7959D43E98E3E07C02
-:106DB000D7F9E4CF9F7818F8A4F3B8838EEE75EE78
-:106DC0007D6F8806F3ED7CF6BFD335687FC7DEABF9
-:106DD000C8EEBF6377D9C0BEF643A4D350F43917C9
-:106DE00091C7A4ED9150D902435E94967539B84B82
-:106DF000612E80F3F4314708F39A6BE1D9B2225C3B
-:106E0000A7C5247FB1BE1CF05BB36DF587CAC878F7
-:106E1000780E0E9631C79E01BB64E03A5FFBED6FC2
-:106E2000946069A338492DEB26F969FDAEF628ACCC
-:106E3000E765BDAFDF59F6B91D8378B5DBD6F271D2
-:106E40002DEB771A7F191BBB7EBA65FDCEB2EA9F88
-:106E50003E8C2F77A5C68DE71AF1AFC5BBFFA54FB6
-:106E6000BDC99003FDE1B752E270791C7A8503F940
-:106E700069C7D34F3C9CC6D7773A20A473FBD9216E
-:106E80000CE8E3A4ADFB66948FDD7B1D3EDCCFAB4D
-:106E9000F6BE41FCD5B9FB15BB46F291B925D0131E
-:106EA0003A59CF4F3BEA0D3512AFD46EF1841DDE57
-:106EB000C83AD58466946B5E7A7E829E8738DDD729
-:106EC00084F65F27C559B7D58E1C2E8F433C696F5A
-:106ED000F1963FD899DBBC9ED2185CC71353F0796A
-:106EE0006FEB68CCDF87F3BF3C6A3DB7707EED8DFA
-:106EF0002F3B373B54CC4730D6B7D3C6F5FDDA909D
-:106F0000F4068BC3AFC6FE76A1F1D00687251E2AF4
-:106F1000E6DB1F3FF73F8F0BC3D3124CAA1C1D8B20
-:106F2000AF539FC797EF8F382401475DF9A0DCD896
-:106F3000FD496515C1C1D911784F8973B3A79E5218
-:106F4000424178BEAAE520C969AB5CA8E9454F7EFD
-:106F5000C6186FCFFE9128BF4E1D788EE8B066DB55
-:106F6000093BDA4787B7EEB4771446E81EE57F742D
-:106F70005EE4A967F68F24398DFDC7599F5F0B79B1
-:106F800057DB6AEEBF76DB87A6FE17055BECE417DE
-:106F9000ED679C0F54FD069CEF07ED368679F71FD1
-:106FA000B428E5F1F49B90C366CA835AE5293D866F
-:106FB0007E4525C5AEA1BC6B5AA1BF11A4738F3607
-:106FC0007EEE51D58F39802F1B93ED1ADAAB4D9E93
-:106FD000EB991625B79B2DF8F4A5F926625CCD3701
-:106FE000B9A224DA7E32E04FD66513FC7778CA075F
-:106FF000E27909B4C3344C3250FDE45756BC53CA4D
-:10700000713E8A4FF6B9E2EECFBC3FF4B721FDDB0B
-:107010007C32D3A2E86B54D9F5C3D1D5A632CD9436
-:10702000BF7AEF641EC735E67FEF456C1303B97B6B
-:10703000AFD4DD86F9ECC1AB795E201376BA17EDDB
-:10704000F4EC587D8EE9BA86F287C40F6FCF7423B3
-:107050007F147EBE0FE0C898BF23FB4999FFBEA2F4
-:10706000533E8F1DC7CD45FB2944CF135998EA8A5B
-:1070700093CB1F0FABA3E749ACA319CF30BDEDA84D
-:10708000F8D401CFEF2B4F9138DC61CAD74816E313
-:10709000C88959997DF13F9BAC9E8AF6FB38D8266A
-:1070A000B24BD0EDF8456A040F463E9CD1EFBDAE21
-:1070B0000912EE3738BFC178AE479C9FF7F5CC5721
-:1070C000A7FA00A36E19075BFA4AC5164BAC1890D5
-:1070D00054056F0D68263FC720D64265166BA73250
-:1070E000C5E9935482EF2DF24BC9ECCFEC8B440BE6
-:1070F0007CE7A18F9F93F5E301281B6DE2F9DB9EEE
-:10710000D0E350DF90CC4CE783739D9CBF2F77CAB0
-:10711000865F26106D7735B26A9ABB2B8D1F63315F
-:10712000BEBBDE1918EE8CA227C5DDCEF3BE84FDF2
-:107130006BD8EB5729CB29FEBE3A83DBD5BDADCF4B
-:10714000CAFA0A935D6D2D9B0738E76C66043FF71A
-:1071500053494E7E7E59679A2F9AFE605C67697428
-:107160003EA3AE937D2FDEDB607AF8D28178546245
-:10717000E96F06D2DF68A4BF0ED14937F9296E57EF
-:107180000257E37C33F2EA24FE3C2071BF97AEE065
-:107190007CD345FF72627566A08F79B259401F514A
-:1071A000792D1B84FDA8AA4C4D284278368975B7E5
-:1071B000D2A5393FD5D0D7DCA2E6107972BF2979A4
-:1071C00095CEA3A8696ECA4F719734DD8EE77C55C2
-:1071D00056E743F9E936F24FFC3C9FD0B08B5D0592
-:1071E000E63C4E87256FD526ECEF983C6EB1EFDE7E
-:1071F000830FE2E8C3D67DF77667FC3C2436267E13
-:10720000BEA0A1879D2FDD5BEDC86A67FB611ADC1C
-:10721000A7539EA52AFC0D13AFF3911FBC6B9BC413
-:10722000CFAD59E8A86B47D2489487C8BF78CF45FF
-:10723000A2782E6DDBBF1FF5A6262FD3935348CE21
-:10724000694A2E9E971AE594A05CBCEBC3977F8D8C
-:10725000FEF55685E1D6DCE536E2937A322E5622EB
-:107260005B6F5ADF0B9D4F6C5C91F3DB129FC16F1C
-:107270006EFAFECC3689CE4F296CF88FF1FC436D47
-:107280009B8D85E0FD19C6FB3FB389EB030B5F8443
-:1072900051F03CA8181FF7A5E8FD23B53C8169D142
-:1072A000793C41BD1DCFFFCF13F8185091627AFF92
-:1072B000D7B9E56DE49F09F07B0006CE1A64EA6F4A
-:1072C00091B27C2825E1093F8606FF90FE8CF99F4C
-:1072D000930376BE4F542485499F01FB17ED86909A
-:1072E00044F94A567F47CD1E89F6A7DB607FC2F37B
-:1072F00038B7852CF6A3258FCEC0B7952E0F3985CC
-:107300007DE066EE5EF0EA0F97507C94F86AC98BD8
-:107310003C2F6CC976294479CC1D439318E159213F
-:10732000BFD17BACEE41D83922F46BC19B23C38C17
-:10733000679766C673628119AF1EBF198F563C27C7
-:107340008DC931B55FA454DB89C8049E0BE01FE2F0
-:1073500019E420CDA306E611D662F159D97AEF2AB5
-:10736000F46FF48B470BFE4E59F07796B5EEE76F4E
-:107370005985339D589BE69DA986897FACFC66E0C4
-:1073800029CBD73E919EF93DE42FCE109D48F3F8CE
-:1073900077839C2D9C798AFCC46F467E7062CF7E79
-:1073A000F90EFB02CAA5330E9D98CB62F96B1396BA
-:1073B000C0D72DF54EDFBC7C8C4F33DF3C1BC6ABFA
-:1073C0007D54C6D947A97FA047DA0FEEC1B8641A29
-:1073D000F2B54AF12B5CAAE9504F6CB5F9D06F7940
-:1073E0004F51F735A8B7D7CEE7798E372770FFEB27
-:1073F0009204BEBFDA12785EF35D1532D3D1BE6F50
-:10740000554212FA8B7CFA8B57A2DED56AD3685F9D
-:10741000F375BFFC1D7A5FECC3F86EA6DC3C0AE195
-:1074200080F6E46FEF6A7DC77B6B94BED3B9E7FE4D
-:1074300061B8EF3C24B3CA787A7CBE8BC3D159F0D3
-:10744000E77424C7C5CE6EB2A35777D455E0BC0C01
-:107450003BC2BE8BFBB76AF6CC207DF2D0027E1E0B
-:1074600073F7297E1E738A32FB9B23A03EF6359567
-:10747000CB4DA64F9F93CE5328701D3760BE24F28C
-:10748000C17FC9A106C24FF3EF314ED5F81795A1C0
-:10749000FE5852B780F69F5F7BA7B46159AAB71414
-:1074A000235F4F6E4D9E88E7646ADFE27995A3DB28
-:1074B000CDFE1CA6541F443FD8D9637C5BBEFC980C
-:1074C0006AB5BB14DC8FC776989F8FEF876ECB5C55
-:1074D000623FF2B2F40BC98BFD91AC4F73917F9474
-:1074E0009FE3F2ABF1EDA74713B87D037891504EBF
-:1074F0007575337F03E0A96BDE209A6FD7C7FC6AEE
-:10750000A6AECF95F278F6D12D2E4E2F0FD979DC7D
-:10751000F6A105EED00A98C781055517A35DF4C9F9
-:10752000BF052E8E17A788D8072C49A63D4F4F625E
-:1075300063902F9AF8F932D69C19EFFCBCC10F0664
-:107540007F187C91B9202110CF7FF98E8BCF6FD21D
-:107550008202CA83EDDC27518CA7B301E0EA038FD6
-:1075600041D63018E1A9DDF311F9179CADF1FDD03A
-:10757000F5784803E9B621B8623CE0EB7BC0D44122
-:10758000E4077B7376BCFE836C03F99B16B834E288
-:10759000B74E27B7A399DA9C39D3837C5276F52A64
-:1075A00080F361E03F24F9876C7E823BB89831F22A
-:1075B000AFAA9CFFB3AE619BEF8AB2B7D6BA263EA4
-:1075C000E082FE1E70F178476AC02F21DCFEBF9F6B
-:1075D000F362FF5D9F3A68FD06093F8FF15D8BC046
-:1075E0004F5982FE23FC9E55A69130F407BCBE790C
-:1075F000B0FF5FB607F01D27BFCBD077520220FB4C
-:10760000009E14B74CE756D0DE427BA296193F414C
-:10761000523E0DFEC34366783ECB90B752AB14F694
-:1076200080DC2C71BAC3E84F49A98479633C8A395C
-:10763000797FED667D14252FCA5D94013C599EDB50
-:107640003B861C36E477533297834DF7AAA146094F
-:10765000D3DF3B5CE83FCED6B549985A95A26A94F1
-:10766000E7705125F3075148E63E92DCA3F78C679B
-:10767000ECD9BF2B71FD1B275DDC1E294B08FC0AD2
-:10768000F135B2ADFB00AA4F7E174BC5F59E22F433
-:107690009BB1A7B93C32F2FA6B85BD619547CF012A
-:1076A0009DA3C018FB0DBEEF8D3DEDF623FDF4C884
-:1076B000A10553681F2D6A2D3E88F939456F717EEB
-:1076C0006442FE80F54678296D0B2A880FABDCE911
-:1076D0004FDE18F2C4BACEA05CF7D4B30029C56D52
-:1076E000C06751FBB7554E1D7389FD55C8A9B36CD2
-:1076F000C2C0ABB4083D152DF31F7444D18F21A730
-:1077000022F414223AB48E2331674FDD978BF2E5D1
-:1077100088827E90AE893C3EB942F051F2C7A1AB5F
-:1077200071FE1B5AA7BA90EE77B4953991AD966465
-:10773000F0735EEAFEEB824C904F745CD7C69C1AE5
-:107740009E291F0F2B8FF8507C508F9AD79966492E
-:107750009C73D492AE8B733F82512EC9E0E7B8760A
-:10776000B4E524713B334CEBDE43F7C20F61F08587
-:1077700041EF56FA36F8A19171BF84A13F28528B90
-:10778000B00BCD7E8146C3CF1174519CF80EA10F72
-:1077900036BA2F5937017E6D0A4FF2615CE20E4F07
-:1077A0000EE533DF3180E3CD8A07A3ACFD14F4C3CB
-:1077B000A8BCF35AB59BFC5AB59FDA4DCF0DBCF669
-:1077C000860F03AFE310AFD297C7EBA7B8BEA36392
-:1077D000F1FB65E79DB5644CDCF372FF57E63D9E17
-:1077E000057EDD4176173FB761D097212F4A976E0E
-:1077F000CC24E26837DFEB65C891317BEA0EA28AC0
-:1078000068951397B5B26B114F63C32AC3A32EFDBE
-:10781000C98D8FF1974C3A7F716302F0DFA817662C
-:107820002DDA068F466A2C753A0035B25D2539C6C9
-:10783000DACF2F0ED512FE381DFD8B865E1A8357C8
-:10784000A1971AFB8B11075A9710A8C4F1A53DC048
-:10785000375ECC3FE5F6EE5A57605102B44F0498BC
-:107860001330D7AE209CCDED53335FF6C687891613
-:107870003E6B01BCD03904D8E7F2A558388CF1F33F
-:107880001292399C406DA8BF6495323E580DBFCF0F
-:107890002E6B240BE03E8CC736719E6B85FE759770
-:1078A000A55CEBAA68C079D9541674147D79B80D1B
-:1078B000BFE0BA043D88F87096EB348FC13EE647CE
-:1078C000BD7EB0DA22F9018E946A4DEA71D618FBBA
-:1078D000379EFB99AE4D44BA189CC7E83CEC60D487
-:1078E00083E2ACCFA6041EAF5DECEC388C21F3DA5A
-:1078F000E975E5DE3EE2D3917B06FCC24F65CEC35F
-:10790000E8DAFBC64518977CFBDF3FF260DCE94F05
-:107910006AB707E13CB9FCF71EBCBFE5EDE5DCCE7C
-:10792000B8D9A2CFEC14F84B4EAC780AF1774BFDE6
-:10793000DF4BA3F99D2DE37194DB420A1A9D3DF4C0
-:10794000BD686B22F9E68CFAE2965453DDA0D3C5EC
-:107950000E9E27659DFFFBC28EBA6DDB66FB600D38
-:10796000C70FB422BE4F0A7DEDE42E0FF9330C7819
-:10797000E66E1B65473CFCA9D521E2F0ED368E7F13
-:107980007D3AC6CF026229AC701EDE9748FDCD7FDE
-:107990004021FD620E8CB50CE83BD07A1BD9D9D6BC
-:1079A00079CC7F5B9B3210D66FFE5A89F4526CBF44
-:1079B0001CE821B06C35C5D9ACF39C13B4C6339721
-:1079C000939D6ECDF398C7B47513B2E3E47BB4F224
-:1079D00038F9C27EEC9A3F26087DA1945D8EF9E8C5
-:1079E0006759E18F0AB5FEED9A93F58C92B43EA8E3
-:1079F000775279AADE47E553091A8F67EFD97F9846
-:107A0000E84B6D2F457EDFD1F64EE24D5A446E5F56
-:107A1000B1F9A3833F817A31E3FE1BC33F3E5BE0B4
-:107A2000FB4A21BF170A7DA0F8D3BEE5F76C9CEF97
-:107A3000C858780DB93D1BEF958DC28321C7ADF8AD
-:107A400038D3969B887421255AE3C05F0D2FBD7DE6
-:107A5000B758899F3768F0CF53C21F306FCB8C5512
-:107A60008360FCC6BDEF0DE1F702B3A3281F0CFA3B
-:107A7000B4D21F637576E4E71E3A6BBD9BF063D00A
-:107A800005F05186883F66A0DD67A5B7FEF2893A0A
-:107A90006D1D43500E58E9AB536271EF154D4DE427
-:107AA000FEF2799A3E05ED50D85E56F1381D973FAB
-:107AB00027D5E6C377227F6EE1FCB1F857DB7F89DB
-:107AC00072A7EA170F7851EEBCAF36A7E378D58FCF
-:107AD000AFF4629CFBA41AF4E2F7EF8794B87985BF
-:107AE0000B1325E10F37E72BB035C16B906F3F7952
-:107AF000DCE6433F43ED56078F83EFE278833A8F0E
-:107B00007FEF8A9FAF50F5F307D2359EC76ACE5BF1
-:107B1000D862A3FC13F497E130BDC5717BE2C22D9E
-:107B20007DC7B76B77AD8B9B7762E40758E9F606A4
-:107B30000BBD025EC88E09023CE4161771EBC62726
-:107B40007F3CF204C0756ACB6FBD5261B4DF9CC745
-:107B5000C7CFB4DCFA530CF1F446AF9D82BE237A52
-:107B600043286E1E43B52DEC453BBC7AB38DECBA71
-:107B7000EAED0A73623ECB7107EDDB8BB6FFE6F5EB
-:107B80007100DFA2676D69D3F934285FC158A79EE1
-:107B90003C12B12E553B7FC3E3BD9AC82711EBB30E
-:107BA000E8D9FD76CC8BB1E2B1AC65BFBDC3928F95
-:107BB00040EBD472620A9DCB7BF29C1DF7D3F7F7A2
-:107BC0004974BFB2F5FBCACDBFF1A27C403C515C09
-:107BD0005EAC57EFF942E16B9E2FA176E487EB6D27
-:107BE000FDC6E0DE3A9AE8FB99E761FCCA371D94CE
-:107BF000AF54F9CC52CAEF794FADE374FEC8CA74E2
-:107C0000DC5F2B6DC1741F95FC79E5A3DF25FA5B62
-:107C1000F8CA77D3F9791E3D93FB6D829938BFF985
-:107C20009BFE85E6B7800588FE2A1F512AD05F7229
-:107C30005665E5CFC6E1933F093E79EF310706511E
-:107C4000D97BC26F197C5511F7FE5AE349FCBE95EA
-:107C5000B3C28EDE95281BF71439A3EDAADA2DAB3B
-:107C6000DB717D3EB8481FE8A3B8BE1A14F89248ED
-:107C70001F7FE5AA81428ED13D31869E5386CFB1CA
-:107C80007DBB8DEE8B89FACE74DFCB1D627C803B91
-:107C900041BA0CCAF4F8FE4C8F5B32E0E3F92F06D0
-:107CA0007DF5C6F75B783EC9C747B95CC1BC187A99
-:107CB000DF6E0B0F34E5C3384CF78944F23D6C821C
-:107CC000AFCDEF014ECA57E9C1EF3E89E2AC0B36AA
-:107CD00038CC79703D7463BDE7C69CBFB2D0A26F4B
-:107CE00019A5552EBC69910B6CD3F9E5AF54DB4255
-:107CF0009477547DDC41F643F5765B05E2E3AFDB38
-:107D00000EBE7E13D0F95F5B0CBE35CB572BDF5612
-:107D1000EE18CDE2F1ED5FDD7E16976FE1795CBE86
-:107D20007547E2111AFBFAE4EBC25EE4ABE28ED1D6
-:107D30000792302FF783A7165D4C7E060B5E0DB9B8
-:107D40006A95978F246AFCFE8298BC3ABE9F47F2E0
-:107D50001D39FE0C7AAC7A7A318DD343B7065D1AA1
-:107D600074DB4B9E96158FD6F72FA23C1A10EBCFE3
-:107D7000084E620578AF5EA39D15A0FF392827F84D
-:107D80001FCF8E93D7C1EA86A29ED1E8CE8E9B9F4D
-:107D9000EB77FBD08CC573654ABC78B7BF4C8EAB14
-:107DA000C797B8B95CD98BB40065B59BE3AD49C43E
-:107DB00057C012A4BC7FF429123F257B899F6CF029
-:107DC0009CD1B94A3F9DDBF627CA1F69A08255B8EE
-:107DD000B5292AFA538BE5A5B9505FE82EE6F5F1EF
-:107DE000F2CE1CA8DFE62EE1F5CBE4621B90E61391
-:107DF0006CF494C950AF31E6392FC9E4DF50E51374
-:107E00000F62DC457D9EDF17B70EF8DA591489F74B
-:107E1000263A58D05584F7344209F555D9BF5F85C5
-:107E200046E00647E01A37C9A3491AE2F594CF495C
-:107E3000F932773C7715E56756BBB9DF78F8CEF1B4
-:107E400074FFEED730FECDEE01BD8FDF64E3FD9C05
-:107E5000DA31BC0CF13AFC62467E0803FF45AA46C3
-:107E6000CF5D2D78F494F83F03CF7F3426DBA99FB4
-:107E7000EA9EF53ABFB251E43528899C0E9424B9A4
-:107E8000EE5928978AF5BF43E0037FD05EEEDA3BD8
-:107E9000F0317EDF53F7105C5F4539F347D41BBBED
-:107EA000FF35D18FE757DE4CE0F8BA2169BDED52BE
-:107EB000A81739872C45A27E53DAF65D2CBFED0951
-:107EC000FC90E39F85B1BF9B6E56787FEE3A0FDE44
-:107ED0009F26E95C8F96806866031E1A75A6D97383
-:107EE0009145CDF9168A52D41DA6713DA671591639
-:107EF000EC83B04E378CE5EB0438A57DF18D31BCB9
-:107F00003E2B94D3D8A1111CF7201CA31CA18BD00D
-:107F1000FEB909D4224ED766FBDB88D3D7FE4526AF
-:107F20003BB356D21ADD50DFF91623B9DC99E015C0
-:107F3000F907FCDE19C32F31F6A5B965B864257BB6
-:107F400016F13C0EE18732E2E86759AB829389F182
-:107F5000535BE4E178B69EE4647FF1B19FBB457C5E
-:107F60006C101B7481F1B167DCE7111FBBC86DE8B1
-:107F7000F322DE2EF6FF334772285F485531278FF4
-:107F800031BBA6508A88F1DD2E8BFC35E878C451D0
-:107F9000DFAD88971147D92DDC5EEA253FE224A3A7
-:107FA000BCE6511D05941F61B3E6471C9329E1A966
-:107FB000F4C5620DF1D924E2C6171AB737E2FEC53F
-:107FC000FC514C1CFF796F39C5418B7DF1E3F8E31F
-:107FD00094D914776047F8FA19717CA6142A08E737
-:107FE000D930D86008E751F3DF01B93C2DA8505AC9
-:107FF000CD5BE6E7E32C74605DEFBF58D7FB7CF305
-:1080000020DEE7F7AA8D6223290FC226F2207EC95F
-:1080100002F747E7411878EC2FCFC49A5762CD2377
-:10802000C90C98F134B8F252D3FB8BEA8A4CF58B29
-:10803000978D33B5CF868D30BA9EBB669AA97D7E6B
-:10804000F34C537DE8C69B4CED8785E69ADE0FDF47
-:108050005AD5E7BA8F6859627AAFC8A162BC0FD20D
-:1080600058F7CBF6FC202E5D18EB6EE46961BA116F
-:10807000E27734ACFBC3D9E43F2A93B4D8F5F78751
-:1080800083B42F5FE8FAE77B843E7481FC3E0A8963
-:108090000DE3443AD713BB6CEE35A81727036C28C1
-:1080A0006FADFA4572EB0BFF2D79E3E55B682B9022
-:1080B0008EBEAFE86371BF1F20F2239B64719E7474
-:1080C0009293F4817B64F996E87BE4AFF0703972A7
-:1080D0008587FB557E02FB26EE9383135990F64F5E
-:1080E00071BE9CA1430AE6EB4D65E2FCF963AB2649
-:1080F0004FC078664781968C2205EADF88C8FD9BD1
-:108100001C5A23C60346295C8E837C9FE6198DFB8F
-:10811000CE721BD77F8236C4F360270B7A8B68DF61
-:10812000A3B866324B939614A2E9D5B3BF685F003B
-:10813000311CAC1A9E8476D0CB383406699D09B4C4
-:10814000FFDF68C8BDCA6124F7CEB87BEEB5A0F3E7
-:108150008E67E6E5D2F3E33703D701FF1CB79BED4B
-:10816000A2FEFC53959BEFF7A0FFFF780133E519C2
-:10817000547BB81D55ED5178BC3CF49774444BD7F3
-:10818000FCCF2E41A06BA5F65528A2576FBCBD822F
-:10819000F27677CD08A2FFCFF03B1BFDD4B64E643C
-:1081A0003DF707433F37BCC1FD5F377C66F6E7DE2E
-:1081B000E9E179D7778AF1AE87C20778BB1EEFF481
-:1081C000C6F2850953901FE0795882FAB7DB40F573
-:1081D00003BA9F11C8B6213CBF67FED7764B98AF54
-:1081E000ADD1F7D7B10A1BC2F5FACD8B3DD8AEA7FA
-:1081F0003FA39FC178A613F6E9E4A02D1DE8A7FBD5
-:108200001B12EDEB309E139F57CC1EBC12B70E63B2
-:10821000BCD759E0F46BB0DE33999FFA35FA672C7E
-:10822000C1240777542EFA536A0ECA3F99FC1F4B9C
-:10823000F63A48FE75559DDBFE20BCBF6570C7450C
-:10824000A85FBC59F5D92588971B372A4C83F50FB1
-:108250002504EEF344E1EDF8BC8F3CF81EF484C72E
-:108260001FC44DFE69079DF37AB3EAE94BA2F5EA14
-:108270004D9E893FF6E03E39E6FCE23D654F0D2319
-:108280007BDBA0AFDB047D2D797228E9834B3CE6D4
-:108290007B53963C9E4BE7894A2516D78EC47B3F7D
-:1082A000302F7D07D0159E23DCF729CF1FDF7924DF
-:1082B000A598CEA3B2C07684CF68BFF3E59B865362
-:1082C0005EE7B1B4F3BB1719E00BA27EC5389C2F53
-:1082D00009FE98D59A5A2CF4BBE7106F37FDFAC9FE
-:1082E000D37F40FCEC7DFAF13BB14DC9F9E18389C4
-:1082F0007DCC2FF000FB18D93F5D2CC1EF8863FFC8
-:108300003C2BF4AFEFCB3AD925E7E40A91BFCEED91
-:108310001045F667601E774BAB928878F3A2C16276
-:10832000C817D009BD78FFA2B83FDD09F6D9702182
-:108330007FDA3D1F4F69E27108935E5772A8CAA4A5
-:10834000CF55C03F94F7976F0A34E23D8DBDEA7573
-:108350006199ECE12FABDFBDF325E57DA787F37FC6
-:108360004B0197DF2DE18410B71B5831EA7BCFE03A
-:108370005CE0FDB464BE2FD8A5CE0227FC7EC6F318
-:10838000C9AA3559B0DC791C1F58C7BFD3C3DA3826
-:108390009DF6E87F872EE57F674E9C032E11E7A2AE
-:1083A00063EC49E02BBEC92698F4C7F0E1BFD13990
-:1083B00097ED29DAEFC6A33E0F7A0AF2BD4BEDB076
-:1083C00027C799DF2F517E027D8FF572FBC4B987D5
-:1083D000C7E19C9A4EF79EB97CBE51682F19ED4FAC
-:1083E00089FD66F1E13787D8619D4ECB47BC1847C0
-:1083F000A8DEBDC38B66F2658981242FC64B8EBF74
-:108400005AEAA37CABCD43D0AE6D09F3F8C408950E
-:1084100005D538F735D76E2CA64BBF6B36A652392B
-:108420000CFD09F0A836CCE7D9B9A731259EBD5D72
-:10843000FB1F7B07E1BA3D3D809F971AD15ABC10C4
-:10844000E51FC2620339F7D4A7C3A9BF4BBCD93417
-:108450003F185FC5E7209164BCEFE86961AF757EA6
-:10846000AA503BA3DF117B262A3E58CBC270F301F2
-:10847000B20F5B1D1AAEB36B0BBF0FCED5EA22B99C
-:1084800057BB6F2AB7E39279DC737B42F71FC5397C
-:1084900036FABB042E5F334B81FEB7DBF9FE380C96
-:1084A0001860873BF2DC18CFD5FA634A6A77E6F1A9
-:1084B0007BF55C6A33FB863B1AEF1EC2FB542FA789
-:1084C000ABED096119F376BA81261F23B822703209
-:1084D0001AD7807318E9F3DBEDDDEFE2F94B3A5F71
-:1084E000A7211C1C4ED63A5443BDC2E5E3F15B976D
-:1084F0004FF307A558B86A47829E0BFC764F038B53
-:10850000FC7D04CC634B88D49DC013DB739890072B
-:10851000C3564FCE8AAE83401A13F97EF63DC35739
-:10852000374D203B27A8A05D0FA52705E7C9F737E2
-:10853000BCBF604011C703FA89139DFC7D4F7B27A8
-:10854000BFB24475F376FE245FE23489F5DC676AD6
-:10855000F89DEE90C2EF5E89FEADF081911AC05297
-:10856000FDC2F344B78BE4D6074768782E31B000DC
-:10857000E9F5576FC90CEF47FAE049179D432E788C
-:108580006E33F9ABADFDAD3ED6701FE665773D2786
-:10859000699807DA65EBA6B8514DEB7B745E71EA1A
-:1085A0009E13746E4B490AD47947635EC48A32C401
-:1085B000DF58D6DC88FE3D908714A76FC9E0F2E350
-:1085C000CCD14B1E5B1185EF07BDC2BFDB1DB818B8
-:1085D000F9A655F0E73ED46FA0DC2DF4ACDDFB6FBF
-:1085E000CC8D3E87156407C81FD6C00E517EA1F101
-:1085F000BC2BA4D239B0E1AF3B6FD1A3E8AD59F0A9
-:108600007BB3182F3F29B08AF876FF9FED5E0DF3FC
-:10861000585B86A0DC6D013DACAF7CC65A0BDFF425
-:10862000E4B79CE4F771C3BA3625C13A3DFDFA9E22
-:108630004BF1EF8B00FC8CEEAB3AEE20B9B93B9BD3
-:10864000F3DF8AD73E198972EB93BD8B2E467C2DC2
-:10865000F3DA0C3A9F9480FCF42C233966F0632102
-:10866000F2A384F742713F4A21D239F29FBD7D1AAD
-:10867000F1DF6E7E2F04D039D13DD0B90FF58B429A
-:108680001FD03D7D3F94F8797BBBCCCF81831CCF3D
-:10869000A7FA24CA57D9DE3ED947FC2C036A8B902F
-:1086A0002FC307A89F16FADB75ACC4729FEB294C49
-:1086B000D21810918F7FF3703E6D29D092FC309FBD
-:1086C000444531F141D43EC9EB621F957F74D3EA32
-:1086D0000DF8F7C3DAC5BE20F4AE7D42CF65C7B84A
-:1086E000BC5F2AF6B225BF19F7ED6D30DF252F29C3
-:1086F0005CFE0B3A3920F4E043F51954C7FD428380
-:10870000751A0D25DE0754AAD7E19F2F6163CA9B16
-:108710000F6239AEA2A50C8F4C4D98D57E909F610B
-:10872000D38723FDED3A70F570CADF3DEE6098A265
-:10873000B8EB6FDD7F7C0AF351F701FEE3EC4BE809
-:108740009F6514BFA9207AEC8D6EBAA48E6BC6FB10
-:10875000410FBCA77AAA0A1B7D0D1206E0E3F57B48
-:10876000AA56E3BD803725E9C7911E97FB02C79142
-:108770008FBA5EF95B3ACAF4DD47FFEC4579BFCBAF
-:10878000AE0F473ADB9503F6401CFA3C2CE8A7A451
-:1087900097BC8ACFBCDC5EBA24C8D621FDD4EC528B
-:1087A000E8EF169CDEA5E8780EFB5D3D908E7ACE54
-:1087B0004916BC7E3CEEEFC2AE9DCFD1CEE6A3DE25
-:1087C0003292EECB30D9994C592ED33DEFAD12F900
-:1087D000272A2D7A48356B5E3518F78DD6CD769CD5
-:1087E00047D516F3F7D5A8BF8CC4B26F7BF533AF6E
-:1087F000D05F72592EEA2F403FE49FE87E4DF13F53
-:10880000C628BFA70DF37B9E96397E405E121F1AC5
-:108810007ACC569F7E1AF5CAD3824EB70B7BB47BB7
-:10882000BB44F9FDC3B6F2BCEB7127B5CD8CCF9F2D
-:10883000F2C22A851C1CA7F2F8C5B8A3B9140F1DF3
-:10884000A333F2872C68954288C74A43AF13E729C0
-:1088500060DB25BD6E2C0B35E2FD720BB74A740E42
-:1088600063D156B3FFBE7AE32B87D13C5CDC62391F
-:108870001F2FF0628D6FECC05FE2C4372E4E12FEE8
-:108880009C216C88E9BC55DBF99DB7FAAB387FFDBC
-:10889000AAE8DF68372189D34D8D986F754809891B
-:1088A000BF4FE9C6FCDB5B057DDC2AE8A39685EDBE
-:1088B00098BFBF78039F2F5B6F33DD5BBC60D7ED44
-:1088C000741EC14A4795DB78DC0D1048F19DCA4DF6
-:1088D000E6F755021F55167CD404240B5C5CDF8E32
-:1088E00085ABE57A5CDFC5DB6CF4F739AC709D6570
-:1088F000B3298FE81F0D9F759DAE33D6E95276A937
-:10890000699DCAFBBE9F2062DF98F5DF670F5F4A53
-:10891000F92E67DA72C87F60D087B59F29427F9EA3
-:10892000BA91EB99A7F794258E40BBE888EA97A007
-:108930009FE2973EF6E2798FA2BD0AC3B860576BFB
-:10894000F13A3CA7BDB32DEF5ABC8FA2E82595F6AE
-:108950008DE2978AE85E90A2978A1273298F424B24
-:10896000457C403FB4EF761DC9FB7D21CACFB6C917
-:108970002588E615478A12513FD8C9B83F427AA9DF
-:1089800024B5236A1F599CC4FD03AB32DEB907F539
-:10899000F7A9CFDAE8BCC9545BF7CB987FB0B34DE9
-:1089A000F5AF807AF54B731BF09E8AEA27253FAA24
-:1089B000D987DB97A47D07E9ACD5E67310BCDF3D12
-:1089C00080EF83DB247F3EB4AFDD7BD5F0ED98E70D
-:1089D000BDB9D81F7D2EBB2859BB1FF32A5966226B
-:1089E000D9DF532FB2D17E7A6A50E2CFE83E167DAE
-:1089F000F31494B3A79EDF69A77383DB2596011355
-:108A0000399C71F019BADFE397AF50BE42D9AE5727
-:108A1000283FA137797F3AA4B030D9DDCD742FCC6F
-:108A2000E2CD46BD83CE415408BDA966CB09AA5705
-:108A3000A1FE0FE3556D52421AFC7A70EFAF28BFCA
-:108A4000A1661BCF6F80F7247FAA307EAA45E87C01
-:108A50002EE3743057C89F458CDF33B4A8999FA389
-:108A600033EE4532E87CFEB639948716936F86F66E
-:108A700025C5219A89BE63EF1BE2F46DBD77C84A14
-:108A8000DF2D067D0F63C390BE3F99C8F3C33E79C7
-:108A90002521B110E6F3C98B0AE5DDF741E7B49F64
-:108AA0001E11FBFF99B04CFB93D1AE73CF47B48F2F
-:108AB000D41E3963477D754AEB87B40ED35BF74FFD
-:108AC000463C7F8B05AA116FDF6A4DF4219F4FEF63
-:108AD000E0726B5AAB23847EEA6FB196265CDFAE00
-:108AE0007D3F6F4A417A7982D38B21CF160A7C2E43
-:108AF00014F85CA8F2FB9EAA0AF73F88F9D0D318B5
-:108B00009737D35A84BCD964C66F97AD4525BA1937
-:108B100021B1E6ECD8FD6E11EBA0738F5D99C3E92E
-:108B2000EF4906C15E453DAC7A9B350ECEEDFA1A93
-:108B3000CB7E7A30C9F6A5EEC178C7B22ED3BBF989
-:108B40007E360DE809E3216DE18642947B067EAC1A
-:108B5000EBD2A6E526F575DEF965A1B71BF56F8B9F
-:108B60007B265A7CCDEE683BBCDCC7F5F0AAB14A47
-:108B700010D7B5C75EC93B38529323F60AD8299F50
-:108B8000250DE076CB28E8FA852C85A5A545EC9542
-:108B9000D519F74F2F4AC3FB23B8BCE81C03FD616E
-:108BA000BE80CA484ED56E7384D0CEF81F84BFB83D
-:108BB000BB008000000000001F8B080000000000C8
-:108BC000000B8D576D6C53E7153EF7C31F8913FBE0
-:108BD0009A78662C34BB31F9202584DB109A40D773
-:108BE000F626A51D83141C58296AABE2B65BD90A88
-:108BF0004E5085281295B889A9D6956942DA7E54D7
-:108C0000EA56DD226D621BAB4C096A9892C8A1A19D
-:108C100025E990A0401BD0D659FC60EB9490C0345D
-:108C2000D24D95D873DE7B8D1D12B43A528EDFAFD4
-:108C3000F39EF39CE77DDED75D7DFFF29AF544DF7E
-:108C4000EDBFEECDC2C6FBA54709B63A94F069DF89
-:108C500020EA20F2449A60FB242343B0ABAF7B139D
-:108C6000254423558B4209CCBBA1EAF335B46FF1FF
-:108C7000E7E1BCEDFA52212A23EA84D5CBF2FD9D2F
-:108C80006AD6CBF33BFB25D386ED3DF99F8ACA52CA
-:108C9000A2C981E98AE760576832FE71FFF796A89A
-:108CA000D877EA928F6295D8D8322FD0FD442F9290
-:108CB000F3D9A611ED9987F6F04BEDD4800E697FBC
-:108CC00039B5C0AF878C0CD6755E540C4B47FF0985
-:108CD0000F513351F7277F1A9E1721BAF6AE64F869
-:108CE0007467FDAB8D683F6FEF9F87F9377F27195A
-:108CF00016A6BFF84DA287D0BFED4DCF95ACDFD9FA
-:108D0000EB96F89FBEB217F39247FCFA1B687553B7
-:108D10004F39616E0FED1736493FBBAE04E1AF2FFF
-:108D2000E5655CC82E581F23DA7E78A6BF24A9F912
-:108D300036F2DBF397D68EE182F1355A69E46A00A8
-:108D40005FEAA8EE96C2F1171F90B0FFE488A2F97F
-:108D50002481DBDBDF2AC4E734C058C0FD4526216F
-:108D6000CFC973257611E6FD731FC66A89C6F7C1A0
-:108D7000B90F7E5A148187BCD2B14B06DF8F713D8B
-:108D800019FFC452A23F0CBE7F2FF30109883A6C31
-:108D90003F8C798B0BE24E23A88238119791C17ECC
-:108DA0005D9F2A06DC735C35DE483EAEE36A3668BA
-:108DB00014F0637A9FD9315C8D72492745BD64698F
-:108DC00058D8DBBC39A1C4EDFA7C1BF96C35B1FE77
-:108DD000299717A44E45E388F3590D45043FBBFB83
-:108DE0009DFACA038EC5FE9B8971419BF79F35DEB4
-:108DF00066EDE0F19B9501B218B72FAD766EEF8E60
-:108E000029F406DABB3F79A9960AF6278E13F5ED09
-:108E1000F24C4599B75DE764115FD7B91BD12AB40D
-:108E2000D7D23BAB35B4D7517A3F8F7F180BFC8834
-:108E3000796DF1BEF3F37EBE0829225EE27CE1CFBC
-:108E4000A25F3A7EDD7C7B68A3C0A1C7E5D50B217C
-:108E500059CC7F554BBCC2E770F2DC7FA3489B8E98
-:108E60005FB812E47AE5EA7DE7B9BB1D3776E0F535
-:108E7000375BF5F34F83078D23AA15429EC7C68A39
-:108E8000EC76C66560DBDFF672DD2EFB88CFC3EEC5
-:108E9000C16DB5C47E138965719CC39B833F5EC65B
-:108EA0003890D423E2B2383EC435D17731AAA33FFB
-:108EB000397031CAE3C9E32B7E6161FEF2338DEB79
-:108EC000B8FFD86955F0AFF14C93E0DFB13F37956B
-:108ED0002DE2C0C908B0DFE4881A677C92234D1FD9
-:108EE000B7635EF24C5B93C4DB9C692A63FD592E29
-:108EF000513C8D7169A44AB473F9FC5C73F09B1CFE
-:108F0000021FD02F51CCE10F55CDE0CF8EDE535E46
-:108F1000CE63479F6216F228B7EE90A60A3FBF6560
-:108F2000FE804FDD69C914FC38EAD81D7DC7447E38
-:108F3000DB3D6951EFEE231E67FC8F8E253A28D664
-:108F40005934CF623C3EE62ED461ADD75E480871FD
-:108F5000B492B6A4E7D0C39AB024D68D5E4A7C9B67
-:108F6000F932DA9AA8D5EA67CFB3A84DE443928BD9
-:108F700077AF678D3D87BF2AF6873C8265B4353E63
-:108F8000C77838ECF067AD971273C5F379EE3C11F2
-:108F90001D90C18BF3ED1E8DF94F64962C80CEAEE3
-:108FA000777576D3E31ED3BB0CE3A49D2AC2F8FAEF
-:108FB0009CDEB640CFA00B71FCB1BEC5DF8C873202
-:108FC00080B4C39CA9731B29EEA145F0B36666FF6C
-:108FD00013AC970D6C55E1E76E3AF829EBE0127C83
-:108FE000A9A11AD641524A021278F3EFD31E4D11AD
-:108FF000F1DA55AC0777E697D3990FA17F3AF4EFF2
-:1090000034F48F6D77DD670D59E0313A74E9DDB0E6
-:10901000D0CF228A3101BF8277E49DD4DCBDEFF04E
-:10902000D77DFB7C7E7F06DF72F5998064A7EB67B6
-:10903000D7E786E6D421E91FF782ACD4453B5F979A
-:109040009147BDE2F0CFE74998E5C8C3D3D79A2945
-:10905000673DAD838A22BF8947259B751E7156F8EF
-:109060000A747E628124C6776F966C0B5F87EA3E36
-:1090700013F7763273D6CB7CAAE97DEE35716E2D6F
-:10908000BA40D17C1D37F89DFBF276FD72F9F2A053
-:10909000CEF981CF428F23C2F27CBE1FD7BBF7E14E
-:1090A000869699F5ABA5B38F95238E274DC9B0E76A
-:1090B000AAFB96FB4EB1DC7DDDBA2F09272261E0C9
-:1090C0003179F6C6E6A5F0375AF7F70ABE473BEF07
-:1090D000C2DF0A97DF5D81600385A02EB57A2A0B77
-:1090E0003CDE2B4DDC13669D90BF0ADE4BBC3EFB85
-:1090F000F6CB12D78304DE773B2F55AEBFAAB0E67E
-:10910000E874849633AF7EAF69CEB9F5D80B590FAA
-:10911000A81E8F9995FF5F77BB4F7CD4C075B93679
-:1091200034D2E02DA8DFF8CB38F77C8F0C7C10D53B
-:109130004B0AF925BBFC528595A48DEEFD38936F43
-:10914000E3CC37AEF7D10FD63FCD3CE9DD1491F437
-:1091500082FBF3F8F9607581DF897E45CC27355BAA
-:10916000F34469619CAF893827D28E3FA26CCDA6AB
-:10917000A585E32997B759C1DB9F2CDE19E7739CBE
-:10918000E3AD4A0E6F3BFB3A48DC476EDE692FBE0B
-:10919000202E6BD067FF06E3939EA98A70C1B9F8B1
-:1091A000A18B737346127C5C4996C27E9BE1F119D8
-:1091B0006EAB9451611FA08CE8275A48CCE3FB5D4D
-:1091C0001E37AB9921A941CCB354F072159D15F30C
-:1091D0001EA229614D82C0C3B691216C8B3FB38E14
-:1091E000E5A33E9D56984F99A81ABE0A3EB294CC6C
-:1091F00055BF7CFE2A5DCDF11393F1B8D91A9F4378
-:10920000AF0FBAE7DCE0B71AD77982EC43E87A907F
-:10921000B20A6FF2804A6B14E4F3A04AFE62C47B88
-:10922000745816E77730ABDBAC5F4699BBEE0BACFE
-:1092300043BBD974CE295F35CF34E6F3BD138755D0
-:10924000F017E2792ABDEE113866C47E0F73E0C8CC
-:10925000BB957495DBA970A5C3679A7A96F779A434
-:10926000DF27DE39B2DF1278FC34ECD433003C83E4
-:10927000F0B3EAA04463D8D758E4E49BF3BF0AAF45
-:10928000BE5023CF77EE31B4690CFD01BFB38E68B9
-:10929000B5C6784999A87C2BF0F5719D8C92883BD6
-:1092A000F8C2D4B5BDE2DDE6D30E2124A3FFA3317D
-:1092B00009EF69C934690FC7E32FC9F0FB1AEC182D
-:1092C0002F7C57FF3AFCFC5B7CDE255D13785182D6
-:1092D000747E67CCA75F697C6FC83CAFCC81EF1F01
-:1092E000C0EF4957EF2E173BBA71D8DEA8CBA8C7FD
-:1092F0009688DFE07A34FA2B9613FC6E284D08BF6F
-:1093000097A523D5C2896AAF60BF399E07C86C6133
-:109310009C25B75E7BFC8EBFE922C7F299643E07AD
-:1093200020E77EC47500E7C28FB6D5E6D4DBFABC71
-:10933000C84E61BF69392EC8F88A62F805DF6389B3
-:10934000B16658B5CDD47796F0931D7904F279A41F
-:10935000781FDCC7F4033C1041865D9A934FAA4402
-:109360005ECCBF9752546CE07144BB4A1D9EEDFA2F
-:109370006B914D95B3E33BE94B9CE4FCA665636CB4
-:1093800054DCA33B9B59EF18A7EFE47092F3386DC0
-:10939000B163A9AC2E7019619DBECF67DF93C1BACE
-:1093A000A77C7635C79FC303051224D55C9C73F850
-:1093B000685C3FE6B189FAE5EA1FCBE374A0D8C147
-:1093C000073FDF1C1C74D471E9ECFCFF0753B7A7FF
-:1093D000EBB00E00000000000000000000000000E4
-:1093E0001F8B080000000000000B7BCBC7C0F0A360
-:1093F0001E81FDD0F8E8B89D17BF3CA9588601C171
-:10940000CEE7626008E160600805E2FD407C00880C
-:10941000E53919182280381288A703F93380B8007B
-:1094200088D3816A9B99191876B131301C04E213F4
-:10943000407C9E8D74FB3F88333054C820F8C78031
-:10944000EC2372D4F5E3281EBC38CF0095BF4E1331
-:1094500095BF4D9B81E13D929AF59AA499AF6CC856
-:10946000C0A002C4003A4CE95968030000000000A3
-:1094700000000000000000001F8B0800000000003A
-:10948000000BED7D0B7854D5B9E8DA8FD9F39EEC5B
-:10949000494218421E3B2140800487102250B0935D
-:1094A00014142DB5113D2D7ABC3A8447906740AB1A
-:1094B000E9114F3624840001068A3572224E103499
-:1094C0005AA841F1D1536C878716ADED8DD656DB86
-:1094D000FA88A8A0A89C5445A7E7D472D7FFAFB5D7
-:1094E00093BD273301DBDE73EFF7DD9B7E75F1EF74
-:1094F000F5FED7FF5AFFFAD71A45B411F9EB849C51
-:10950000873F9AE68A849021FD2921B2D6E3809490
-:10951000E8E7475860725EBA18F82FA3ADB0CEDB0B
-:10952000FD1742B208F91ECFA37F21806770C018D3
-:109530008F9192A04262C5FDEDCC200CD644819C57
-:1095400017E0AB35DFE8A7DEE11B4FD208F9C2C94F
-:1095500052BD8A6695D3F44D67B4B1801087101E52
-:10956000C1C65377497529A69742DA2890B95D9EFE
-:1095700024E320EB08994493FDC34452D13FFEC439
-:109580007246DAD44048CCDE0FCB3209256BB78265
-:109590008E1FDA7D5F0857E0783C44067C281C1F4C
-:1095A00036122484CEEB88FFF2C03C3AFED6694ADC
-:1095B000D00E193B874165E233F038371F610787CA
-:1095C0002B89C6F11D6B1941EB398322D944A1A621
-:1095D000822A07292164EB94CF03613A1EA71C213C
-:1095E0002AA49EE4E3BB9A88BC9DBBC8C5CC3B7152
-:1095F0003D6458A349088A302F63BCDB6C745C99C6
-:10960000743D2689641F85B794CF4983F118F3729E
-:10961000A4E8A719F03A9A90CD0D0E4C9B26CF499D
-:1096200023508FF4CE85F5DD3A254BDC24F4973FAB
-:1096300032E539470F9D6F23AFD7AA1D7540796377
-:109640009D13F1B695E32744041CF7E652D7DC6876
-:10965000C9C07184880FF3B73A692598879744F792
-:1096600015400B3D6DF329EC9BAC966DD206D2CB29
-:109670008C523918A3E3F4783C413BCDF704587D74
-:10968000C7EB4254C3FA21CF305ADE65ACFF64B158
-:109690001F9FF4FF3E524D08E5475F4EEF6BD08FA2
-:1096A000FD757B3044BFBBFFFCE96BF369BBE46D28
-:1096B00021B80FFA25AB2CEB45F632BCDA54FA6F21
-:1096C0009AEF9AB668364CC1FDE5E3D580B78D4573
-:1096D000AB5D6B61AD8AD9FAA9F47FE70B69FB9AA0
-:1096E00062E9DF665EDF02204D2BEC1E39E7DB23EB
-:1096F000B4D4F4E1EEF19158062D2CDD88EB9DAA4F
-:109700005CFDEB132E3B6EEAB78D78334FB9E93F22
-:109710002E2597229F5FA0FE170DC1CB8EDB70DE3A
-:10972000A259DEA42ABF9ED3471F9D1550FA28C117
-:10973000F50C5C53DAFFFD25A00BE007BD12E51820
-:10974000F2229D6FF374D22BD1F5681AA968EB2829
-:109750001EECAA12137CACCF5EA02FF807AD6A2FC7
-:109760006AEE16C603F03D8B1C6C19FAAFC1D82007
-:10977000E34B5C87AF8ABF18E06F5C3FFEECA43A16
-:109780002D06EB5D1D40FC78F938364CBF5D8BD162
-:10979000F96CC8FE61E86D62C2E3A58CCFFAC6938E
-:1097A0001325E6FE0DFEBA4408BD08F89194E06B5F
-:1097B000618A0F325509EE4B322F596072A51FCFC7
-:1097C0000E99187802FA3DAC07AEF1E290AA1D2678
-:1097D0003CDB03CFFD19F0276792987B3C7E6F92AC
-:1097E000D3A9FCCA24BA3B0D5B9101FE332940FE8C
-:1097F000A4F9339432900B9707C3B49F661BEF4FC5
-:109800005D6B59D73FF375EDCFD703FF64C9B761DF
-:109810007BCD5E2E37D4461CDF80FA7E563F71BE6C
-:109820007F02393A09CAA99C7E1A03A06F1CC39A09
-:10983000671D01BC8FAEEB9A0F735409E2C190FF14
-:109840005401122847F5C39FA19E43AB46BCDB736E
-:1098500042248C78B3EAD3947239418F0EA02795B5
-:10986000C2461B85F0DF1C15F98D24EA6F9E8672B7
-:109870002F4A0F3626F0156D2AA99E291598BC256A
-:109880007A26CE5F36E880DB0736031D3B193FABF7
-:10989000BC5F05C643E5A19344B17137A57480BD93
-:1098A000A40EE173A1B298007423938D20E7EC21FC
-:1098B00091E80503FBDFCAF549AA796C9D925C0F1C
-:1098C000E40A4C0F489E3ABE1E37AAC067821E2685
-:1098D000E781DF4884EBBF20AEF786867AF20E9DE3
-:1098E0008CEBE89544A3F423E7D48542B49E04BCF2
-:1098F000484534F194B3540E6A66FAEA5B47B216EF
-:10990000DBB351B4C03C6D1EC73C321E52F51A4C3D
-:109910008BC72E04FEB0A55D5E0FA61CA59B4A0159
-:10992000FA7724A72BE2A14C3A0561AD3A697F7C16
-:10993000BD79B994F4D5471FC67C35A5DA3B906E46
-:109940005CE5AA00AC40C16E18CF503E9AA1E1E69A
-:1099500055E27858B7C8AC51747D86F6CC43FDE427
-:109960007DFDCA0F605EEB4BCA4E8009971654AF5F
-:10997000B99CAEA7AB980880EF8DD0D85468E1842D
-:109980005E097A1DFE994DC8FF109E09E91E463EEC
-:10999000567B53D464439E8883DA2FC279FBC0FA86
-:1099A00029E53331F10FEAF1D517672FDDC8FAD376
-:1099B000E9FF80EFFC09FA342D646A97007EACFD64
-:1099C0006C00BA41FCAEFA6FE94F253B1C1AD81D5A
-:1099D00045A21AA57DA711D54F653171CD9009E833
-:1099E0001335A75787E5BDD0BAAC276416CA51CA4C
-:1099F000B7663A6FE7722050D354D04CDB3D57EE38
-:109A000009821C184AC56646FAC0F96C4EB0B337D5
-:109A100097EC41F9D848E9A810ECFD1211EDA18DA1
-:109A2000458FA9667DF53343DE0CA00FA2C915282A
-:109A30003A08A1F8918AC49073FCDF4F1F8976D24F
-:109A4000C5D287FB46EB7A7CD5F5FA659FFD7D7123
-:109A5000F4F1F7F667AC6B2AB945D715EDEF166D43
-:109A6000CEA0F6CBC075DD81EBEA2A22A16472B8E4
-:109A70005B10ACFAC99C9AF507B9D5B25EB64BBF7C
-:109A800033F78141F0619B6B9DAFD1AEB35ED2DE07
-:109A9000053B5656511F19FB878DDA0E1DECF973E5
-:109AA0003984D97B91553101ECA022827610342083
-:109AB00052D8A985A29B0446FFB02E867D63A3E6FB
-:109AC00098B93F497559FB9FAB0BE6F13BEB151C71
-:109AD0008703FA03BEF4D00669BB520E8939D1FE62
-:109AE00064EB075DB17DFC9D17450706BD025A1961
-:109AF000BD5AEB3507CA48B2F51BD0DF75D6F1A6C3
-:109B0000944B89F53CB276CA648FA4AE2793532652
-:109B1000BB66789FFF4237ECB9A7056A173606BEC9
-:109B2000A3E3B8E13F54BFB6404AF59934AC8A8408
-:109B300035D0931AE3132D9DE9DF4EC1B20F37BE26
-:109B4000A71E07EB2FBE90D222C83559B3D8CB89B8
-:109B5000696343E06B32254A77FD0353E589D48876
-:109B60005D1B9A5B4DCB6F6CE89C0ADF8D723345B1
-:109B700063FF4DD5A6C93E96092DE7C0AFE4FC446E
-:109B8000F8A812CDA4DF1DA40BF3E957BE7E04D7BD
-:109B900001ED2ADA649DA861BB0A791ACB414350D2
-:109BA0008E4AF1A972316B0EE0CDB65008C7254739
-:109BB0001CAB29DF6D767258E3B09FC32A870B3840
-:109BC0004CF504C06E85C23475DA222AC22E0E17F7
-:109BD00070389DC37E0E177258D881F06685B5B770
-:109BE000498EB2F65D1CD6389CCE6195C3851C2685
-:109BF0007B58FF7606BB6C51D6BE9BC3051CCEE0DE
-:109C0000B09FC323382CEC4138D5FAB98A3A199E53
-:109C1000FAE442573F8CCA83E3B50F8E25C08C5EB1
-:109C200032044687F16F19741344F9483C79C86FC0
-:109C3000E31C6CBD1BF797A15F82703F8AE9FB09AB
-:109C4000D0C7E73AC5E060FCF5432E4F77829D4BC5
-:109C5000D3ED0D2AA6DB1A0268F76E69D0B85FA5AE
-:109C600018BF6F6C0822BCA16132A6EB1B42F8BD85
-:109C7000B16116C29D0DD5983ED83017D3BD0D6188
-:109C80004CF7342CC672D1863A8477537B17D2F6C0
-:109C9000061DD35D0D2D98DFD61041F891FD65CFDF
-:109CA00017513D7D2E2CA29E4F35FEA173AD7E90A7
-:109CB00021D556B9983E23DD92AF4ECBB6FA4DCAA8
-:109CC0000B2DB0A764AC0576159559DA73E44CB545
-:109CD000E42B99551658F65C6581C744E758E0D1E6
-:109CE0006D3758DA1B19A9B1E48F685962C92FD0B2
-:109CF000575BE0FCFA7FB194CFAD5B67C9DFE60C40
-:109D00003F235279357CF1264BB961E11DD67DDDCB
-:109D1000ECCC8B925BE4333DCBECCF4894F7521EF6
-:109D20000985506F31FDD208740B7EAF5C12DD27C0
-:109D300080FFEA8A13B0EFB01731BD33607F99D04E
-:109D40009EE279F0359DF653E93B11E831F11909AE
-:109D500098EA51B97F5264FBE64D77B17D75EB5DB2
-:109D6000C9F7D728D9E93C5ABF4CEEBFED11256E93
-:109D700007E9967D4AEB5D0296FF7BDB37F213DB4A
-:109D8000EDEF8FD25C85D90E891A7E51A267F5EF6F
-:109D9000776D3DFEF9B0EF31F6B912E7F3CAB9C1FC
-:109DA000B79B289FAC5709FA0DD77BAA08D815E7AF
-:109DB00054C6F7646F1EEEC78DF203C767B22B500F
-:109DC000FEB8AC7E5ACF1C942FEB3307B7CB94B8B8
-:109DD00084FE3B292E9018D53B8A5C3DAB808E4B90
-:109DE00079450AAE25A87F92EEEF09D981789012C5
-:109DF000EC9BA60509726F462ECEDB66C8B7CC2A4F
-:109E0000FCDEA40E3E2E3B8C0BC6C3C7658BBB315C
-:109E100095E24E1CEF947806C293E37E4C2F8D0F93
-:109E2000C7B4223E0CD349F1119896C70B309D1848
-:109E30001F87F5CAE263309D109F88DF83F1099880
-:109E40005E12FF1A7E1F1F9F826969FC1BF8BD24EA
-:109E50005E89E9B8F837F1FBD8F895988E895F8B61
-:109E6000DF8BE3D7603A3AFECF988E8A5F8FE9C8DE
-:109E7000F87C4C8BE2F3301D115F8AF50AE3B76082
-:109E80005A10BF15BF6BF15598E6C7EFC4342FFECB
-:109E90007D4C73E38D98E6C4D7623A3CBE19EB65FE
-:109EA000C737623A2CFE03FC1E886FC7342B7E2F07
-:109EB000A6FEF80398AFC63B304D8BFF08BFFBE210
-:109EC0000F63EA8D3F8EDF3DF18398BAE33FC5EF24
-:109ED000AEF84F3075C68FE17747FC08A6175A27B2
-:109EE00025C72AC7A54C97059EFC6EBA853E2A5EFB
-:109EF000B7CAF1F2570A2DF9652F5AE578F078992B
-:109F0000051E7F78AAA57CC9A12A0B3C76BF558E79
-:109F100017EFB5CAF151ED56395EB4D32AC70B5BC2
-:109F2000AD725C6BB2CAF1BC3556399E739B558ECF
-:109F3000672FB3CAEFC002ABFCCE22BBACFBEF195C
-:109F40007BAC7A6DDA2396F63CE58F25EC57A22898
-:109F5000675C25FF6EA9E7283A9A209F7526A7120D
-:109F6000FCE5801299F2F71DC415349FAB18693ACD
-:109F7000970719C07734CDE47C3704F88EA6E9DF63
-:109F80005C86E74C5F7CABE5174DB4B1F4E184F936
-:109F900005F44855887E6F1EC661FA45003897A0C3
-:109FA0009F80E8672AC12FD65CC0E07F934E55EAB8
-:109FB000CC7FCBF2C95996EF64F0238DBF5A0BF9D1
-:109FC000E969D1EC204D1FB12597D38F49ECBCED49
-:109FD000AC18EA90E87CFFA3B2E776F0A3FDD51EAB
-:109FE000DE27D1EFCB1CE17C704D7F6C0B3F2483CF
-:109FF0005C24A107E17B1A093D24A1BCB6FA451BEC
-:10A00000C1E0A6ED7C2656EF87FC8CAB17A35FCA98
-:10A010009877B377F0F14425A6979AFD04F78DFA67
-:10A0200011859F2311765E0329D583F7B87D21C85A
-:10A03000DF7044D963A7EB60CBC99A4FC6B36216F1
-:10A04000FD116B5E057AD8017A680448F92E4C3D03
-:10A05000A49B9D1B915E4C55A20A901AF3EF9B772F
-:10A060002E9B37C5C72F24DC1FD461F975EEAB27B3
-:10A07000C37C283E4EC0778A8FE7A521A9F141E035
-:10A0800064818E3FCFA0A2FD82C5FFF8BE10FE8D79
-:10A0900064F263E6D507713F794052111F06FEE86E
-:10A0A000DF6DE9863F86D5FB23F69BD09ECCCFC5DE
-:10A0B0007E23F1FEB93E34E8384324E1647ADD388A
-:10A0C000F7219D795FC99F2D28CC2E49ECC72657D3
-:10A0D000E379EA00B99799B0AFCF0CC3A250FD491C
-:10A0E000F56592714D57B87F4ACEBFA8F32BC35F79
-:10A0F00042F6E77DA5F32EA004286F901C399E87B9
-:10A100007090EBDF02B0EBA83D72EC8DA762CBA99B
-:10A110001CD85044752DFA2DACF6DC869888E7EBF8
-:10A12000057E2A706863F5DC0E90B93D68F42B3724
-:10A1300059FD299B6D7C7F7BD88AC7024AD0FF4E90
-:10A14000B7DCC493CFC6C7CF2D8D76F6F48DDF3A3A
-:10A150008E074AA83964C2676129251D18478C8D6E
-:10A1600023B17FC2CF170CFE913DDC6FA2E663BB2B
-:10A1700046BF89FD1069369E27A5C2EF807EBEE2EC
-:10A18000795D859CFCBC93AE0FE2696C8AF535CE97
-:10A19000EB0CF8D81BB578FEDDDC59837654738060
-:10A1A0009FB3FF85B60AED1092D45EDCCBF1BB897C
-:10A1B000EF17F746AA1C582F33DFB24E45DB67B8BE
-:10A1C000000F4D6A553AA4FB76B27223EFBECE154E
-:10A1D00066765B3AA49B8AD977D798BD0E567E8F58
-:10A1E0000AE9E612F6DD5D7AC8C1CA333F2DA9A798
-:10A1F0007FA673A022B55A14CA41FF92904C619772
-:10A200001A25E04776AB5D981AE3CE8E88E2185A9D
-:10A2100025BB33947E25F8DDEA4870241BAA03D6BB
-:10A2200039CA972FC7C8AFA7F9B4BD313B8F564283
-:10A230003DE7CEBD95576AFDE577F3FEC774465BF3
-:10A240000AA17C8EB5BD76DE9EB3B3EB04F89B29E4
-:10A250008EB13D237F17CFB7437E26521BD6974B37
-:10A26000DE8DC1798681E740B1D8087022BF1BED31
-:10A27000B4F171043BA3912AE867AE751C3F34C862
-:10A28000B29384A21E933CE0F9119EBF01F6FDB487
-:10A290003FB993F9518DFCADC63823AC7E23F70B43
-:10A2A00018781DC3E591413FA9E898E8A265FF46EB
-:10A2B000EA5D56B8CE64DF01BC38DB9A1F2EB4C20B
-:10A2C00073C75AE15099159E3CD5D2DE177D7E9416
-:10A2D000A813FD25DC8F62F85E76A935B8CFE9F7C3
-:10A2E000D3455C588EEF3B7278B987EB98BFA5D108
-:10A2F000C3F985FB5D9C5C2E3617B17D499F5DC11E
-:10A30000F1DDC5FD1A8F36B4B1F8940BD8C3EDBC9E
-:10A31000DE2E7EFED8C6FD323F04FCDB61BD985FB9
-:10A3200026C2FD325BC12F43D356F0CBD8813F9973
-:10A330005FA605FC32343DC0FD323F02BF0C851FD5
-:10A3400006BF0C4D1FE27E997DDC2FF300F86528D7
-:10A350007C7042F75CF0B775807F86C2F773FF8C24
-:10A360009FCBE58333A3D9E00F7B6466F27DB1DF39
-:10A37000C6FCEEB960A850FAB884048FA1BF9B8ACE
-:10A3800061F0774FAC0B362A9960B732BC4D0C07A1
-:10A390001B6DE560B73238DFC6F428E80BD01FE448
-:10A3A00030F327503ECB047C6FE1745976222CCCDD
-:10A3B000A3E3F8A3CCF5A2460218B7C0F902F24114
-:10A3C0009EBC21845E972741BB04C795BFB7AE0AE8
-:10A3D000C468F1D3D5475DB4DCA8AEE03A707D1611
-:10A3E00095A8E05920CE224D84F5395819443FDA1A
-:10A3F00096DF4AC13DD06626B1D0031D1BCABD31D0
-:10A40000063CCD4A0F97C477A3FDDB5C37270DE9E7
-:10A41000492383EEC7FD21EB3E286DB2D59FD5BC05
-:10A4200097B5938A6E8ADBADF6C4A89DD67D54732A
-:10A43000D19C41FDCF45ADD6FE0B9B12EA7B06AF0A
-:10A440009F1FBF1AEDFB54F43D4EAC49B34DEA8754
-:10A450003DF1CBB07CA27D2703A150BB4D3EAE6049
-:10A4600048957C5C0D815D2B1FD7781AE4DF431C77
-:10A47000AE66B0CAE220A83D986B1B82EB9370BE1B
-:10A480001D2270FE7C109501FDBFBE705D88D2DC80
-:10A49000C17F22B8DF78435E55A55378D76C8728F3
-:10A4A0005D02F4C6E21914BE5E194A746301D0C39A
-:10A4B000C322017A78A473703E1E10E7E009A17FE1
-:10A4C000A6A0492D03F59DAADECE2671563449BBC0
-:10A4D00053395F91E324D16E9E0AF35DDF34474523
-:10A4E0003D725D10F7074463E337E45C46FAE0EB46
-:10A4F000B7ABC17ABE964D92DBA16B6C9CDF8A999B
-:10A500007C34E83FE3C1C1DBDFC0DB8F770916FF96
-:10A51000CE90EBAA2B6D99B8DF097A408E7E293157
-:10A520003FD961169F66F05363D10E179437FACF67
-:10A53000CE89C1F684341F99C2E226287E713F7805
-:10A5400084CAF11294E368F73917D785989F3C8243
-:10A55000F10DCEBAA00EED481E462FB0DFE4E57136
-:10A560003C1BF78A1872D13897D9AD869C37E8A082
-:10A5700031C0FDEB7365E667FB0B9D9FB11F81FD4D
-:10A58000A15A87E77BCD93D87C6C992C0EC4561CBE
-:10A590008BC1D959B377D15A98AFBED0D0D73CEE42
-:10A5A00082B0B82B231E0FF003E7E0056DE3518E58
-:10A5B0001878FCB610AE073EB265EA4218E7D185BE
-:10A5C000ED1B784BC4FB77B93C1D9EC20F97A6309C
-:10A5D000B99EA1A85781BCDD7284D277927DBD93CC
-:10A5E00097EB88CDD90636A2C1AF46FE0149C37E9E
-:10A5F0000CB820AEB0B8BE9875FFF1FFBA1DFFA829
-:10A60000CD1A77F7FFEDF8FFDBED789A0F7648F873
-:10A6100002763CB7F3F7F6D16F829D5E2C1FC130F6
-:10A62000BA047B3EAB7846AC0AF23BBBBAD18E9FF4
-:10A630003CB81D4F12EC77C3AE37EC77C39E37ECB6
-:10A640007532D09EE7FAEF1BEB4232C48911D47FFA
-:10A65000E39ABFB14E87FE13FC1E12157366FF45C9
-:10A660002FF0F910133F78AC76C3C5CB0719F53F2F
-:10A6700009E65AE46B46F6E0768E11EFFD45AE61D1
-:10A68000AF87D83968513131DB634D548EFBE87C9C
-:10A69000DAE7B2F329C2E578B6E197290EFB47A3C2
-:10A6A0007CB7CADDF6C5353A9EA394133C7FF4E42B
-:10A6B0007485E07C3C6B6E04ED492A7F8B1593FC1E
-:10A6C0002D68AB4039A773FB32119F20EF0265D094
-:10A6D0004F829C21C19745C8CF85B36BE087A88086
-:10A6E000FA03E234C60F226F2E325EC3889FC8A3DE
-:10A6F0007F206736C86C7CE4696BFC3951297D5436
-:10A70000F4DBCDE4FDF98239EECFB06312EB51B941
-:10A71000A026937B6F08E16F2983D047A23F8A244C
-:10A72000C8692A8844E8BF60F62CF433F5F9A564BB
-:10A73000ABDC9603463CCB7FAFFCAE55FEC6B8F310
-:10A74000AFE8B7DBC8E5F3007E4E68472CE9223D51
-:10A7500049FAF79458F1EE2AB2DAF302085B881F3F
-:10A76000CEB19E93CB9EECE4E7003C3EB366B2B123
-:10A770006CDA77FF48F9E4961336BC4762E81DC3EC
-:10A780002F7B0BC469D2F5A981B84D4ACF0B48B5D0
-:10A790000F323F2622C6837D4C5EF64D34ADD37D0D
-:10A7A0008AC2FA69B19D847B42463CE2C20883FBBF
-:10A7B000F0DF668517913959701EB168A70D38888A
-:10A7C000DC42E4933DC6F8297F6F51587C752DA972
-:10A7D0006B0639B69EC773D7A84486F8C1E54FDD2E
-:10A7E00057318FC27BB9FFF60CC5BF66B28397782D
-:10A7F000A20A9C2BBC7368E277BE46A07EB4391BCC
-:10A80000E208A9BD0A718489789FDF621DDF85C6D1
-:10A810009F385EE35E51AA71C89D4228D9FEE0319F
-:10A82000C51AEF76A1FB4EBF53347EDE6CBDEF74CC
-:10A83000A17A7F543492EC9ED485EAF5FC8DFDBD5F
-:10A8400097A2DE72478F027260A51C9E2514F6C780
-:10A850006B29B6EAD0708A0AF9E90931385A32957B
-:10A860006BB9C8722760637111E5668983B4779606
-:10A87000F3F12FF63FA0007F7EFCC8DB57C379CDF4
-:10A88000D29F4AC441E77576BF97C470DF11554027
-:10A890007F2D392431FF9B1CABB8D6247F315296D3
-:10A8A000E27BE9A35E8CAF58F2983D3A9BD65FF20B
-:10A8B000E43BE309C5C3D975BDCF0D87FDC42302B1
-:10A8C0008B27D47BC65F4BBF2F91C9CDD549E4A060
-:10A8D000646774FED14FDC73818E84CE233761BBF5
-:10A8E0005DDFB5D94D76FF7F2A36A31C9E33E90F75
-:10A8F0000BD191021B9FF99E8411C7F9D1C3021B92
-:10A90000DFD3B6A813C6D7D9A18469B9959D7F4274
-:10A91000BAFDC6A3077C8087954F4B16F9B2B25398
-:10A920008AD9C763FAB61DCFAF421E81CA911528D6
-:10A9300062687A6839C67DAFE8DAFC27C907F5ADE9
-:10A94000FC43F1128C015E5F9582B3017EFC211FF6
-:10A95000EC07CF74EFF3015E69BBF3144A57977DA0
-:10A9600066E233C2DA8FA70F6C8F5A380AD0D7CA83
-:10A97000AE8DACBF04FE3C03FF1836502F8CB55B88
-:10A98000EDFA73E4C50ADC877766248D93EFD30B69
-:10A990009C5F971E38B75BA7FD7EF4D887BB753ADE
-:10A9A000FE657FFD74F79D6057FECCA9829C59F926
-:10A9B000C86F7DC484F79976C6EF671F7EE8C15DD6
-:10A9C000945FCEFEDE8EFBD1B3CF9CCED3E8BCCF5E
-:10A9D0001EFC739646CBDFF6CCCCA18087DB9EF8BD
-:10A9E000C6D0C1F6E740AF51BB795DA3B8AEDAD3AC
-:10A9F000020BCA3FCCD384F53976E8581E8CF3E3BA
-:10AA0000D7EC780F7125FD565F06EBB51CE53EC00F
-:10AA10006B289E57ECDFF027697C327CEBC345B88E
-:10AA2000F34628DB0460BDAFFDF6F472486D410DBE
-:10AA3000DA23BD28B713EBAD7C85AEEB25A9D7F1A2
-:10AA40001CF98B02F85FB97F23EB37611D3F867FCE
-:10AA50004C19B88EF3ED56FD7E8E2CBB1F6DFD4359
-:10AA60001949E3A68C755CFEC43F0D6A0718F2E035
-:10AA700042F85DCCE3FF82F6D0AD76E0ABC7DC7A7E
-:10AA800080AD6F7436CD3B7BE05C1E186BEFDB7ADC
-:10AA90006F0239D9FB8C5D85FDFA92675E453E3BBE
-:10AAA000FBC44B8A86729278046A279C257D7FDDE1
-:10AAB0006037AC60B63059B9D71BB3FBFAD76945DC
-:10AAC000F49A599A0FBFBF8DDFA38CFE57448F5C59
-:10AAD000272459B703F6422697A343102FCB49B733
-:10AAE000A29658D753980CEBF8F6E54077A9D6D143
-:10AAF00098BF0AF3BFD4B49E7B19DF26965F41F955
-:10AB000013FC837DEB1A155E2549F8F46C875D868E
-:10AB100038DFB329CED9FBEEEF7E45FBEF217B8AF0
-:10AB2000FD3BC7C385F8FC42F3FBAAF8BB1B82BF01
-:10AB3000260DC4E3477F492EFF8FD999FF6C050985
-:10AB4000CFCA9606EA2F8984F4E105FDE36DEE9203
-:10AB500050AE7FD42945A16AA29C5891C24FF89269
-:10AB6000D1CFD347C6833CFBE8E84F385D32BA5FAC
-:10AB7000B1FF6D45E7FA206AD60729FC547FE4ED62
-:10AB8000AD3C9CBCBD95FBFF94B4BD3372E8BB30BB
-:10AB9000FE33DD36A2D326CE744949FDABCFDA6D44
-:10ABA000D638716FC56B69B49EE47369D075E3BA2A
-:10ABB000D0ABB09FD35FB611BC4F2B07DFB7D3FC30
-:10ABC00046AF4BDB44F1D5E85B847E48A3BDA604C9
-:10ABD0003CC9816A1DFC1C72667539B391A396FD50
-:10ABE000B04D152DE3A67A3607F4D09B134EDB60EB
-:10ABF0009E6F25D8836FC9A479286DEF2D5D08AEAF
-:10AC0000D592D1B7B5FDF01A896866FD67EF7D135F
-:10AC1000C6437EEE2470BE22FDCCA9833C59B9DB2D
-:10AC200019B5D3F91C7BE28B07016F67EFB713BB34
-:10AC3000295EBC56656D9C7EE28BDDFF45F34F437C
-:10AC400065DA7FED6E5A1EECF0FD6E0CDAFF8FC7F1
-:10AC5000D2C6132A9F6B7F7EE7D5205F6A41A6D2BA
-:10AC6000F2B58F0E45BBEED410069F3A901B85754A
-:10AC700059F6F8332B408F2CFDB19B80ABE0D813F5
-:10AC8000AFDE04F0D99F7B31BEF1ECCF4F5F067C85
-:10AC900040ED67CDACC76F31BF3340DB5D0A30CBD1
-:10ACA00017CE735907FB92A59052B9B1F4E934BCA1
-:10ACB000BF632A87F556DA7B6F0FA27F45CF1671E7
-:10ACC0008F13CB063E5CDA69ED4F73303FE84AA53F
-:10ACD00077112B1FC966FCDA8DF54A1D9C4E797ED3
-:10ACE000627DA3FC384761423BACFE0A3BA94B4660
-:10ACF000FF931D4CDF2FEDFC72B4B53D9D7F4FECF3
-:10AD0000877DFF9EC0EE9790834E8C235AA6C44643
-:10AD1000A5537E7D52218B816F97F962A3FCB4BF4E
-:10AD20009F7239B9CC4561FA3D9B8F03CA034C1C15
-:10AD30003D3F86F55DFE949300BD2FFFB917CF5FB1
-:10AD4000963FF9C5A97FA3DF3F7AC28DFE92E53F0A
-:10AD5000BF03D77BB93D7613F8517A0FDAC91E5A73
-:10AD6000FEA383CFE7811DF2912D96973EC8FE7C0E
-:10AD700079979D5F6AB0CE83EE0B8AEBE878F4EDAD
-:10AD80002CFEAC9EB8826B21AE041C0740C7AF3BC3
-:10AD9000D939213FB75DCDFD499F2CD0D270FC251C
-:10ADA000CCAFB59AFB0F567F4B1BEA378D03E243BE
-:10ADB000C94442EE50EA46839C95E2DF241A85E5B9
-:10ADC000F8084C8D7292CAFCD05226F3B7D9328360
-:10ADD000A4B604EAB17822E2B9AA8FCFFE275DE2D9
-:10ADE000D5F76A43A1BD790E664F6F7386563870EA
-:10ADF0003FE3C17BA1384F2A10F427D8BCBE10D83E
-:10AE0000BC12C7FB854DB7833CEF3FCF66E727F504
-:10AE1000B2F6AA06F33FC1E5D280F9333EFB444DBA
-:10AE2000473E33E6B1B9414579B2B12180E9868622
-:10AE300062A2615C7F106189E3C35EA21309EEC95F
-:10AE40006A6CAC764F7508FC56D026F83B254F1837
-:10AE5000E9CB1EA8C3BDBFC3C3FC94924727B51E50
-:10AE6000F487219EE0BC05F0A470586E9B8D78A5F8
-:10AE7000F5F1FB7267F86EC08B2367AC454E2999DC
-:10AE800065167800DE0CBA38F0DF8D3F82F8023F9D
-:10AE90008DC6EF4500DEE05E04C0FF07F0F70CC38F
-:10AEA000DF542AA3CCF8ABB2C029F1772FC55F6677
-:10AEB0003F5F25E2A19EC7A519FC948A7FE15E0948
-:10AEC0005C1AD8D1D086A9F13D3D855ECF7532B9E7
-:10AED000564FC2782E4654E65721993AC931F99314
-:10AEE0004840C7FB4C782F1AF23DCC8F68ACAFA41A
-:10AEF000CAA7ACF24F7B15E673C70B3611E4955425
-:10AF0000FF0079C7748E26CDAE766A88E720FA7581
-:10AF10001BB97E5DDFB79E56FED8DCA061BA85F313
-:10AF2000C936CE27DB61DDC13F1714714D5B671158
-:10AF3000D49F775398EDEF6396732B7FB02B06F178
-:10AF40000E2893344C6328BF5EB34747D27AEE1283
-:10AF500012027AF1BFF6FD28CE957405C01FEAE70C
-:10AF6000F823870BFDD7B377106C4C4F1189A511CF
-:10AF70001BEC9F12F1DB183CEA807D77AAF1640597
-:10AF8000757B1EED2FEB753BCAEFCC1BBB5EABA1F7
-:10AF9000F3F0B4BA713F991564F4E80986855AD381
-:10AFA000FA65A5B0FBEE735EE976D2F5F4401C2E8F
-:10AFB000A5C71D6D239C781E64EB0A801CDCEC6722
-:10AFC0007A469B4B7BBBB4BFDEE70E667FF9CAAD0A
-:10AFD000FC6FC863755A99858E0D799B3EC34AEF05
-:10AFE00086BCEDE993B7D5B9309E8C783BF26322ED
-:10AFF000FD37DA145DA0764A23D89260DFBD2DB00C
-:10B0000078DB817200E3513EE929D803EF05ACE318
-:10B0100071D03AE517D43BDCFF699CB71F20D52DD2
-:10B02000F07E4B0BA52302EFCC50FA2118AF538CC6
-:10B030006984D20FE393C9981AF439139C2726FF29
-:10B04000B954F49CC8EE6188A073884CF7811EF057
-:10B05000331D99E200BB50B6054F80FCEAF58A5DCE
-:10B060001097B0DE33C70171D482BF1CD7FD736F58
-:10B070004DFE60E729F01208D08DEA09929325FD74
-:10B08000F77525B58CC07EF280A71BCFFBCA9DA2A9
-:10B09000C59EDCE60C5FE534C1A5D03B5FB7AFE3EE
-:10B0A000FC93DFFBFD0EE77792A39322137F1BF146
-:10B0B000A144D349B189CFD78DBC9CC039E740FEAC
-:10B0C0004E21C7F6FD63E458637E14D7CD9628372A
-:10B0D00032A97CF760AA8B2A8CFF50D33F4F403AAD
-:10B0E0005B0AF8209E3D7DF6CBD70B078E33516E61
-:10B0F000F5EB230DFD55541FDD3319E4600A7D7413
-:10B10000E48DD1DF86F8A9779E9704B3BF6E717C7A
-:10B1100023EA83DAF814A2D1F1D6B4FD00D3456D49
-:10B120001D48F7EF47D7FB303EA685EDE7DE8FDA07
-:10B13000A25201D2ED7909FCFA84B5FF7E7B2396F9
-:10B1400023E07D31F5FB7E3BAB4FCA35B4A73FE131
-:10B1500073ACD9660FC139CDFB6DB4DE20F8AC817C
-:10B16000CD5012FB14DF0180987F52371AE49CC146
-:10B17000EF7728542E011EDEB427F5B32F77CEDCEF
-:10B180000E7CBDDC196A839478D22FEA3D8A77441D
-:10B190006AF722BEC3BE6B2C7E56E6C77C87DBC532
-:10B1A000C49122DFC7EBABC9F397B77EF8DC5D141F
-:10B1B0006A2E095713D3FE5A226C7FBDE2E94AFE7C
-:10B1C0002E081B4F12FA64F66CAB1DE5D002EE0F91
-:10B1D00032E8B59F5EC23E7E2FD4424FB7C4B7E37C
-:10B1E0007A0B9B4BEF9942F1F729A523F0CB099BF2
-:10B1F000A70F053E5ABBE96BDB6EA4ED7FF6A28478
-:10B20000DF17C79D58FE83BB82F7DC08F6FAAF6CE8
-:10B2100018DFF4D98999780EFB81CDEA47A871B17E
-:10B22000FDCD5B4E962E8A6FB6D8C78B5AE62BE0C3
-:10B230007F5C14DF8ADF17C1A10CDECFF8F078A5A0
-:10B240000CE73504CF47DFDA787AC63AD46765E889
-:10B25000C7AADD624F7A9FE42DA766913BB53DAD4D
-:10B26000D82EA1F65166166FCF243F6AE370F90419
-:10B27000D6472770DF601197237DE36BB759E4C889
-:10B2800007CEE47E92FFE89BDFD7908F06CEEF32A9
-:10B29000C65F46BF3D8CEFFAE773CF9464F3E99F36
-:10B2A000C7342CFF813F79FF591CCFA71A16931082
-:10B2B000954335765ACE03FDDFDA3C19F6D9EDFE1B
-:10B2C00074C134AFDAB6A524643EA76C9FA7D498A6
-:10B2D000DAED5F07DBB39545FDEB90E52233611DA9
-:10B2E000EE73568B2EDA5FCDE6E9E3C3B8CF66F294
-:10B2F000E41D5B300FE4EAE9B65B93F277962B61CD
-:10B300007DDAF8FA50BBB7DCB43EC6BA24D63FF5B6
-:10B3100046EDE777811FE05E66D4A4C2D780752B27
-:10B32000488EB7A08BE9975354CF86116FDA93AF4D
-:10B33000015D6F71631C676AFC8D23E1C1F097C2E8
-:10B340007EA5F6CE18D710E897201E6ADB181D5C84
-:10B35000086FFDFD723AA84C3E9F9BFAE8A09EE85C
-:10B3600094614F2A17A2833B89EE18641E7D7430C6
-:10B37000E659333FDEB449433A781FEC94D103D702
-:10B38000FFA4A2FBA6C239D02609CF994EBAF4ACCD
-:10B390001B183C01E4F3495FE4EAA9E5FDF02DFB4D
-:10B3A00046FAE699FA3DDD72AB2F999FF5A654F463
-:10B3B00053A493928AFF7DF4F38E2D79FCF2726789
-:10B3C000650DF0018924F7E71AA921BFA5344FDFE5
-:10B3D000BE13F4E9494FE1E7519AFBA833BC1CE8DE
-:10B3E000E20E511B3F4FE8DF7F0EB03F1B664D7FE3
-:10B3F0007724F80BABA7BF6B437B08DB23605716A2
-:10B40000F0B808F46F0C437D90785EBAC35590F4A1
-:10B410003C767D43DD4468973874A29AE3E008B334
-:10B42000A3FE9330BF97311FC51656E15E9A229056
-:10B430006AA0739B1C6E817BBCB640E604DD84D79A
-:10B44000888BF9BF9CC78FB714D0FACEF75E5461D2
-:10B45000D076DA0FF8D71C39F22766FFB42D93C5E2
-:10B46000279222D3F742884FA0B0659F4FC73BC8B1
-:10B470003EF5A702C383EEB5333F0FD125D07BD76E
-:10B480003B89F187F6F7EF8D3810B989E5FB8DEC34
-:10B490002696CFFD972B6B987F32715DAF3FBCA195
-:10B4A0001BEC99EB0F0FC3FB74D77B46BF07E70B71
-:10B4B0003F051F3ED0BB9FE9E5C47A8F733EFDE791
-:10B4C0000E51B7D175396EEB3DEA86F17E8FBDBF67
-:10B4D00078C36F8FDBDC34FDC32B276D104F7433C3
-:10B4E00004E8D079CD239AC28CE028D69F4FBABC0D
-:10B4F0000CEE1A32C76B6E8F6E55A1BD55EC9CF7E2
-:10B5000086DFBE3213D4276D6F3DA437BF48146861
-:10B510007FDE21AD995DBFE3ED1DA6ED89FDEDF563
-:10B52000E391DF2B941D88977E3C39106F069EF0C7
-:10B5300002478505CF686F1878EEC35BDADCABC8CD
-:10B54000F8D4FC72BD67D47BEC7E221B57229E3F51
-:10B55000832CCA6FCFB8422F03DFEC75857E03E9D9
-:10B5600032476F9E5C88F70F5F05BE5C2185F3B3A1
-:10B5700046E0BDC4D143E05D98EEE4E7AB897CFAD8
-:10B5800026F00BC475F338CB9BF8FC8E7DFFB41707
-:10B59000E3289F78350FD2E552CF96EF02BFFD52D8
-:10B5A00042FBFB9343A3078D477B93FB3BCEBA8CB7
-:10B5B0007759D8FC6EE676DCCD87DC517847F3E628
-:10B5C0007AC962FFDE5CCFE23888DC3DFE3A8B1D33
-:10B5D000D9C4E31D06B603FBCEC4768CF91DCDCBD2
-:10B5E0001E07FBC3FB27291AF81F8EBCF8C9EF6B97
-:10B5F00029ECCA75E0B9EC163FA7DF4A11D7FD7EEA
-:10B600007FC85D0A7EA74DE9419DCE73D3B3A44B9D
-:10B61000A4F8393AE6F628C4216E9D2EA2CF6A5BC3
-:10B62000FC814815D42B61EF15A9DC1EDDD67DB257
-:10B630000DE8F1F46B76F4F73BBD128E6393AD3AEF
-:10B640000FECF7F73A94A4EFE39DF7C82C8E58E877
-:10B65000C178B7F924E200B971A87BCE50188F2FBA
-:10B66000485420FFD3ED92C8EC64C3CF1193999F47
-:10B670005D97191CE2A9EA34C7AB6D9C3503E32939
-:10B6800016B4BE84F7297DE5C9DF87BAC4CDEED9EB
-:10B690007ABBD3AF04FC7A6788F8B69137D82B40D1
-:10B6A000BDFCEE2A05EB478441EBE7AF51AF04BC8C
-:10B6B000427D90FFF917597FB49BC53B6DE7FBE4D2
-:10B6C0000E5BB079066DA7638B5F80F530CA85DCB1
-:10B6D000CC9E393DC3F0DFB0B8F6BC22D509EFA44B
-:10B6E000E48590B989B73C82F1B77BA01CF36F2247
-:10B6F0001E3AC63C1983F3E34DA01B609D6D8C9EE2
-:10B70000366D11D09F49F1970DFAE2BDBBEDDF8494
-:10B7100079E4B7082AECBD699A74DCF51E07A3F337
-:10B72000D67B701F08EE516837AFFD37382E6F8A11
-:10B73000F9EEF130FA78EF02F491E1667E9BBCFA03
-:10B740006EBE4F8AE13B8911C013C0A172F63EA1C3
-:10B750001CD2CC7128FDFCC3F661749E2138DFAA8F
-:10B7600099AC44C10F20B674E07BC0F32376720518
-:10B770009D5FABD01D027ED12789FC1DAED09B8082
-:10B78000A7ADDB87623CDB06319487FE9D7F55F0D9
-:10B790007CEC68E8937BE13DDDDD9315E48BA32130
-:10B7A00076BFF5FE35851DB00FF7D657E13BBF518B
-:10B7B0005541C9D2584E5E180DE7836B4455A0E53C
-:10B7C00023D5C63D0315EF314C903EBDB218CECF08
-:10B7D0008689E04B22A705F63EC8FA35552AACEB20
-:10B7E0007A355330EF5BEE7033FDF2B2BFFA0E37AD
-:10B7F000C563E0AE1D2A35E3297F668C037FA1DE99
-:10B80000A268C63D7178572483AF4B46B7185BE4F6
-:10B8100043D8B3986E91B74D637ECA1F5C1566FE20
-:10B82000453893AC40FF22FF0BE0BA667268D358EC
-:10B8300017023BD72DC2F2D04E166D27A35C8C5554
-:10B84000D076F7F843BB519FCC74209E88DCD3069A
-:10B85000788ACECC0E425CEB8E29A35E82FB551912
-:10B86000277AE7801E8DE6BAFED001726ABDA2017A
-:10B870009F67AC3975237CF7077F782BA4194DBFE0
-:10B88000BB13F481BFE74F0DF87D9662F1EF65BC05
-:10B89000FEC197909F51AD58FC84BDFEEA5D809734
-:10B8A000DD2591488DC6BE87B2FAE771606DF72C31
-:10B8B00078F7FAF43562700FCFC779ED54A39B186F
-:10B8C000DECA41AF1978DB206A5DF02EB37EB50386
-:10B8D000E9A38874A3BC1A06A7C8234CF4FAFAC6D5
-:10B8E00055102791389E1F73BE853F785F12D60A88
-:10B8F000E25194612CAEFE60597700ECF82DFEE425
-:10B90000F109673DACBE3DC53DF5331E460F201223
-:10B91000DBCA300D9542EA217A1AA4398E10C4C7C9
-:10B920001E14B53F229DEF9034581F286FA3EB776C
-:10B93000E48533E81F3C12F90DA6CF7B8A8DF662B1
-:10B9400059F03E6EF9493C1FD9AA321AA96D61F22D
-:10B95000A236D0E380F38ADA12A2EEE1F4A61B78D5
-:10B96000067F17D75735D731BC6696103C6F059FB9
-:10B9700018BC579605E528FE325BD6AEC27524DDAD
-:10B98000FA085A6E2BB40BEBD32412D66E8F03F940
-:10B990003722E17923E5F75FC379624DEB503C6FC5
-:10B9A000876BEAD05E3AEF379DB7D741DB01FFDF07
-:10B9B000E91609EFB140D80BC0DA1A4ACB489FBD4F
-:10B9C00095C5B45DAD5C5537197460C831CA1A0BA2
-:10B9D000A8BE00BC2DD0F555407F271DEA0B300EC8
-:10B9E000F74EBB06F35FB0F3A93BC06E71077A5AFE
-:10B9F000403ED44E66E34D6FA5DFD1BED17E0DE54E
-:10BA00006B5BED1AEB8FE3AF9CD319C7C3423EEEDD
-:10BA100085ED6CDCAEDC6804E8B3760DC52BE485FF
-:10BA200019DD834BF3BC887C7502E6EFD5B3B0DD3E
-:10BA3000217313F82281FE8C79D5F079D5AC61F3AE
-:10BA4000229C9FE8B062D06E4D399BE702C2EA8B20
-:10BA5000F09DB6BF90CFA7467F12D3852D764BFBC6
-:10BA6000BB8BF776E37DB612451310CFEC9DCC3C33
-:10BA70003EAFBC26D65F5EC993882F526F1A2FFA4D
-:10BA8000454D30E5ABD3CF53C6A276AE90E74062CA
-:10BA90003AF97D05CF518A765AE7757AE3E8075A75
-:10BAA000C1FF79B782E71507C5E09BF9B80F553498
-:10BAB000267F82BF990D727A615310E4F8814A861D
-:10BAC000FFD3DF2251A0879127AAD301DF234F8420
-:10BAD000795A87E7D81421429FDCA3E3A35BA7161A
-:10BAE00001E4657CC48F16831CA0EB0CF660AE7974
-:10BAF000DC747C192D59551087943939BD4AC1A77A
-:10BB00007F13F24FEC9A03EFD8661EDF752BF433E8
-:10BB10008C98E643F3477947B0FB57C7692E94AB3F
-:10BB20003F7517AC472B7F8F7E248C2C1DD3E39061
-:10BB30006650FEDE9C0EE394C98CB27E79B0EFEEC7
-:10BB40008A092057F0EE4819A6315236506E98CA2D
-:10BB50008FE1E5752149B952AF66D997EFBBFBF28A
-:10BB600031B07FDF0A76621ABCE7A77E0AF1317A2C
-:10BB70005044BC6FB5C51C2599F05EB848C07ED94D
-:10BB800056FC3B11F86EEB211204FAC8A8FEABDD9F
-:10BB9000BC8EB51E3FCE5B56C866E0FFA3634ECD9C
-:10BBA00082758A1E11F13D89AA5F7876B9C11EFAA5
-:10BBB0003D8B3FE978BE0EF5F7ED794AD2F79AC989
-:10BBC00005ECC4C4F2E923E7A01F2F7FE7767C17BA
-:10BBD000B676961CBC8296CEDC595909768C564DA9
-:10BBE000A96B281D77FB84B5C084DA6C765EA5CD81
-:10BBF00062DFB5192CDDDCB07822ECDB239DB2B31B
-:10BC0000888E77EC46F66EDDE6924F1C616A979659
-:10BC1000573EE6F816FDFE6E39D582F4FBBBD33EE7
-:10BC200071C2F9CCFDE5551980CF432D56BB8EC0AE
-:10BC3000A36A741F546A8F84BC745CADBF25884F9F
-:10BC4000C91E6BABA1B0F494072C9C01FB9B8DAD7E
-:10BC50001D73814E17146378F280F97ECEF5C9FC0E
-:10BC6000FADE59705FA94027EC1C35720F0AE58592
-:10BC70005C6414E8DD2874BC3BD9FE2422879E0353
-:10BC8000B91C29092B50C59067AD236B1E0479F6AA
-:10BC900025B7EB48DD62BC0789FC2F813DD45B9959
-:10BCA0006CDF749DDB857475BAFDDA57C13FBDA0AA
-:10BCB0009ED9FBF9ED9F0AB81ED4EE1B46DBCF2FB1
-:10BCC000C7A72AC98235114729AC4F9148340DC600
-:10BCD000D345609F10A1FAC78C07A3DDBFB5FE76E0
-:10BCE0008F1DEB5F079BE749FDF3F1F0F9E405E9F0
-:10BCF0007C92E8E939BCDFEFDDF7E9912980FF3577
-:10BD00006C8B941F795B7098C691AF5FDC38AE8501
-:10BD1000F6283E1FF1B07B0BDEF21EBC679428DFD5
-:10BD2000C19C07BEDDED3E3B81EDEFADF27400CC72
-:10BD3000E92AF17B5E82BC2AB577E13DD0D603ECDF
-:10BD40005D74D87943BE40448DBD171B35DE2FAFDF
-:10BD5000837263BD1E15E8A075CCEFCA003F5BB8C7
-:10BD6000BDB0B084E07E75614E37DA0BF39BB8BD91
-:10BD700020079B41C8BADBFD6493C97E405309B6D6
-:10BD8000D04DDC5E30F43FD7DBB581EE16D4AB4D41
-:10BD9000EC7E6A9F9DA133BD9A1F607ABDB685F681
-:10BDA000A37162AE30DB254C8F6B3BB9FDC0F570E3
-:10BDB00006EF37B385E9AB0CB0237C107EA0A35E01
-:10BDC000C6B3BCAC7EBB654809D39719AD0751AF6C
-:10BDD0007583D36508C80DA62F735F7A45073405B0
-:10BDE000E8E7362AA77FEA667234A052FB2CBDDF53
-:10BDF0003EDB20F27326C2EC438CADA7E37C9CB7FC
-:10BE0000677CDFCBC777F078FA3741BEEE8B144EF4
-:10BE1000904C7C6BDCDBCA2B67E7F479F5EC9CDAA1
-:10BE20001B5CF4A0643A7F68F1B077AE5A0CBAAAF2
-:10BE30008F05A05DBC4788725C41BFDA4678170A5F
-:10BE4000E885EFAF6E70F3778D38FDA4D227861C9E
-:10BE5000F29290AF84E2F7DDE88328AF75BA5F8293
-:10BE6000B9BD1B69CC5E02FC1EB9A61CC6BF75CA53
-:10BE7000E71877919F62BF78DED8677E45B9EE9D5F
-:10BE8000F50ADB87768B49EFC94CF3CA389F2E99A8
-:10BE9000B8019FCE087BA7D03959495AFE122F937B
-:10BEA0009B2E2F7BA760EB9407F15E634AFD2C135A
-:10BEB0005D4AA24F0D7DDB0AEB3C9590999E1B9A43
-:10BEC0007594FBD16A09E52BC17D6784FF5E8C5EAA
-:10BED000ACA0DFB0D51671C07A6C2BE7EBAA3A3A6A
-:10BEE000E05EFA575E178A0F58E78D21312A14C099
-:10BEF0003A47D552E6D7C177394ED3FDBBF99CE21C
-:10BF00004A2FF36775C99A08F189F92D8CBEB64E90
-:10BF100051701C9B266475480566F9CBF0749D9B97
-:10BF2000D1D7A629CF217D5DECF816D5DF39F55D97
-:10BF3000D339E2A97B1F2A043CF7BFCB121AF4FEC7
-:10BF4000C2A2FA97A6EE4D723ED0970FFB280FECD7
-:10BF500003A33798CF59E6F1F55DE0B5FAEF40BE9F
-:10BF6000DA707311CD06FFD281E9511FFAEF97B154
-:10BF7000F3DA5BF879ED99BDD7E2BB07A570973688
-:10BF8000C9BA7FD0607D07E2837D0F6533BF46D499
-:10BF9000625FDDF2E04FC6B2776574FE7B1A44CB78
-:10BFA000AC60EF5FA39E7E2EA8DBA5FE77CD8C77DD
-:10BFB000D82EF65DB7746A86E1BE8B54639A45EA63
-:10BFC000300D9008A6D9A40BD31CD8E7C2FB6BA4F4
-:10BFD00017538DA82231C9FD421244B88854632AF0
-:10BFE000C3BA65F49F4BC89D0E8CBF80F30BE07BFA
-:10BFF000E39CC238DFAFF6D644BC49CE2B567B4318
-:10C00000DBBDA8576228B7E773117EE2C763BBE0C8
-:10C010007ECFEA2DEC7E8921D7715F43DBFF513A59
-:10C02000D303FA0E01E5D73AF7D597211E5B6D1FB2
-:10C0300099CF1B88C35104BF1B63B43B9FFB17E61A
-:10C0400073FD07EE6D76FF2E88F77FE6839FC19420
-:10C050004FFAF2D97D6AA31DD13D6DD460E77BA66E
-:10C06000FA188F5C9360FF5F506F27C00B12EBFFD5
-:10C07000850E28ABDF0FF7A3CBB43C76CEC4F436E5
-:10C0800025240DEBB5D8DFC67D586466C88C9713A0
-:10C090009CFE0D7DB220C1AF9F982E90395F24B4D5
-:10C0A00043359F1FEECDE0DB2626BE36DEBF357E54
-:10C0B0005FEB96505819C6AA05601D553EEE0869FB
-:10C0C000AF1A46D3F70136F9F35FF4857FE735C53C
-:10C0D00043A9A13AD1FCFED222CE8733A5D64A90FD
-:10C0E0006FA7C32408FB875B48DD56B0C7C82B1277
-:10C0F000CAB7E174DCF0BB3FB970A0918EB0AED08E
-:10C10000F4E306762FE754C2FBD51FF277914ADBA2
-:10C11000EEB81AE8E00C7FB7DAE07FA3DFD22EF7A3
-:10C120003CD0FBA55DD36BA15C69A71D7FE7A9F897
-:10C13000D0C66AF00BC13B2D2EDA4F0EEDCF910E1B
-:10C140007284A0BEFDB0D5155D47C7F9619B8472AE
-:10C15000F95C8988EF8DC07397121F5F5A3AB4F368
-:10C160005F37811D7286CB11E3DDC70F2B35DC1FD6
-:10C170003F7B608300F7123E9CA7E1BC3F1CD69535
-:10C18000974EF193E363F7738AF6DB6385741C4B78
-:10C190001EF97D610DC8BFC2C89264E7CC437C4CD8
-:10C1A000FE7DF804C178B80F9DFC778D1C5D3EB311
-:10C1B0009F35CD2758E4D6875EFEFB48391728C740
-:10C1C000E3CB89A7CBC7F8BECB07E751F7B87F8C85
-:10C1D000F7D74E3DC1CE299EBDB7360FFC51C37D6A
-:10C1E0001A3BF73EF038C68DC33C601F4DC7A7C150
-:10C1F000F8EE71BF7906FC0FB41EDECF30EA9D3A2F
-:10C2000050CBCAB7D1F23EC43BF195013D30BC934F
-:10C21000FD4C4E18F6E3D26816FEEE427FBE88F95A
-:10C22000304427C57FE9FE6BF05CABD497CEE8596C
-:10C23000ED1A3B07C71FC983791C981ECE033FDE4A
-:10C2400029E377A0E4481EE0A1DA1B2EF599E6FF6A
-:10C25000C1DB4FA17C2F16EBDEBA0BE8F231F63BC7
-:10C260002477BCBE5D34CB8F69F0837893607E2BDE
-:10C270007C701E75AAEFBD9C088BF739CCDE635D20
-:10C28000CA79EF5407DD3F517C7CB0FF07987FAA45
-:10C29000EF3D9B2E8C27FB60FFB174486B783C3FD1
-:10C2A000895E8BFC45F1D2E248A2AFFAEE4545D952
-:10C2B0007DB7B3027F87F43E036F75CA1CCB791537
-:10C2C000E3EF9CF682E3682F4793DF934BD4F78923
-:10C2D000EFCA5EE81EF049CEA7EFF277D1567BC3D6
-:10C2E000D7FB505F58F548CDE6E57980E71AB8539B
-:10C2F00087710ED3AF80FD36DE3761EFCAC6104FAF
-:10C300007DEFC64EBC02E21C4FF9195CE79BBD41B4
-:10C31000E77864EFD256B2FA052CBF95E7FFCA5B07
-:10C32000BD98F54F04F6BB46363FFC3E8521FF52D3
-:10C33000CFDFFAFB14F7834C1E82EDADF60DC16C16
-:10C3400081CDE7EF6BCF90377F773B8E7F6C3B865D
-:10C350001C06BE84903D120C8EFD47E0EF6FAD4F82
-:10C36000E6E65BE4F917F78E688673A0730182F145
-:10C37000CFF6D6B504F4D2C29DDB93FEBE5D1FCCD2
-:10C38000E349941194CF4CFC1CF3313B3DC6E521AD
-:10C39000FCC1F9CC2842F87B1794A6B230E406F72A
-:10C3A0007FA3F97BEFC52482F6D558D2856909E9C8
-:10C3B000C6743CE9C5148F494780AB2F28F1777BC1
-:10C3C0002B60F2CB1CE1FB2154F7AFF6F033404F6A
-:10C3D000F07EAF20815DB4622A8CFFA84F357E07C6
-:10C3E0009424FCAE5AFFEF816860D7CC0E0C66D760
-:10C3F0001055FEA82F7EA390BDFFCBF821D5EFC42A
-:10C4000025FCFE24BF476CE06139E9C2388867DB50
-:10C4100057BF3086E27FC97E2FEA8351ED4DF83B4E
-:10C42000604B487716DC2F1DC5DF93206DEC1D0F88
-:10C43000E39D88316D76CBBB1ECB137E876829FFC9
-:10C44000DDB0A509DF8DFB9B9BE143923882C4FBE5
-:10C450009FA77D29DE612D49FE7B3089F73FF77765
-:10C460008918DFB31AE285847EB937666F9DDD4A8D
-:10C470005F5D971599DE7B6A14826C3FED7585F6DA
-:10C480000903FB19AB323BEE8020248D23BB268DA4
-:10C49000EF174913B98AB6D3B84C5661BFD918758E
-:10C4A000E13968A3CAF685C3BD550ED8A713BFA846
-:10C4B000C2FD94CBA569185FAE2C9727C2B9E7F1EE
-:10C4C0003D4BBAE1FE426340463FED703F3B0725DE
-:10C4D000C3447C1FA0497DCC3F1FD6C9C3CE19736E
-:10C4E0005582BF637AA4E37611E046BA6D190AFD5E
-:10C4F00008E16EBC77334C26FCFC75F6044A7FF9E4
-:10C500009C1E64D28AF78F672C7FD7097A3D9FAF34
-:10C51000FB94B4029C87CCD77377FD493FD0E9F3F5
-:10C520001DCD2F5F4EDBB345658C6B2DFEB2F10F39
-:10C5300097D3FE7A3B148C6735F090B746B6DC9FF4
-:10C54000CDB9CD0A2B09F7886562CAA7F038DE3F5E
-:10C550003CB81A33C755658698B350F5E0FDE04BFB
-:10C56000D304661773B814608A924E5BA4CA45C799
-:10C57000D9F986807E87A31D8BF2314EFF27E17C9F
-:10C58000A06F831E12D7EF4BB087908F7427BF1F09
-:10C59000EC84C3BA44FA696A2023C11FED881E7770
-:10C5A0008D83753C61C3F7A4D673FB5BF6B0F87757
-:10C5B000835E12D3F50974B7FECB6B91EE7A29DD59
-:10C5C000257B17CEA827AB1ADA09B61C1204F6B0E1
-:10C5D000657667ABB4DEB8A794A087A2ECF2474BB0
-:10C5E000D2C09E1977EC7AF65E1FC517BEF758AF1A
-:10C5F0008C847DBFBD3E73A49C01E53C488F9F7831
-:10C60000D8F98F5CEF0E427E6347454033D1757396
-:10C61000833A521E09EFA53A46C2EF2335A7F89D8B
-:10C62000E65CBF580DFE2585EFFF97A4B1F12E49BA
-:10C6300073637A0B87EF93F53930FEFB28FD40BC1E
-:10C64000C091DB18FDAE1EE6C07BCFAB9F1F3174DF
-:10C65000B038A0071B0223016FEDB7D5A0DFA3728E
-:10C66000D571E715C0E75E870AF428F946DD330D7A
-:10C67000E8FD051BDEFB6AF45668F34DED49BEC9C3
-:10C68000E85792443D1B36450D697FB8421E06F4BB
-:10C69000A2EF024DB461DB11067BF56C81E66FDB26
-:10C6A000F62C8387E8BB049A7FCFB6E7199CAB676B
-:10C6B000C32F80DCBFED570C1EA9EF02F8A16D2F30
-:10C6C00031186C0B6AC73CBAEDB75780EFA7D1168B
-:10C6D0009C0BFE9D1FD3F197D8E0BD5A961EE478BF
-:10C6E00031F21F83EF14DF87789A98FF24AFF77435
-:10C6F0008AFC7FE7F98753B4FF335E2F96A2FE5181
-:10C700005EEF788AFACFF17A2752E4BFC0F35F4C2C
-:10C71000D1FEAF79BDEE14F55FE6F55E4951FF77C6
-:10C72000BCDE6B29F2FFC0F35F4F68FF4D5EBE8732
-:10C730007FCFF1B6FC41A77497D3C15EF82CF6B653
-:10C74000A0FDDE5E578EF4DF3889D91906BDE740BB
-:10C75000BC26C85B95C5558D52D93EEE9769CCDE97
-:10C76000A85C55B40DE86EF5AF24D4A7548FE0EF64
-:10C77000F0EAAB58DCCBEAE7D97D90D5AB647C27F7
-:10C78000CDA047A3BE31FEDD7C7C4D7CBCC7D20A68
-:10C79000F9794B60E46C73BCA76A851D949F206493
-:10C7A000A72993E997E255558ED1A03FA87E01B9FC
-:10C7B000B9DEA3C4E01EFD7A55C6FCA6CC2A15F24C
-:10C7C000755546FDB33EB3CA311FFD39E9E89FC830
-:10C7D000E7717B4DAA8CF7F865FF0CCCBFFCD1D973
-:10C7E0002AC8D126D2EBAF84F9AD91F1BCF6485DF1
-:10C7F000157ECFF77FE607F9FCAC9FE1FDB8F7396E
-:10C8000027BCE72A7F4F447D81F8A3FD16AE11A314
-:10C810001A2D725C5D2D02FC4013D357F4CF3BA15F
-:10C8200082C771D0BFCEDB2B5E80F89DC62D721003
-:10C83000CE73E04F36E98322FE7BA54355B66F34B5
-:10C84000F4D57DDC8FAB071C188757249380F977CC
-:10C850002C87AAFC3C8DBF63362262D54F052DD6AE
-:10C86000776CF213F453A2BECAADA3F2D154DE1E0C
-:10C87000502DB0A0B2F72CFE17044CD03900800028
-:10C88000000000001F8B080000000000000BDD7D91
-:10C890000B7854D5D5E83E67CE3C3349669299640F
-:10C8A00026CF49801020C0044204449D848011B1E9
-:10C8B0000E0F15D4E2846780BCA0A858E9C7840491
-:10C8C0000C1435FE46047EA003A28516ECD0A2020D
-:10C8D000063B2022FEC53658DB8B8FDA11B9883C27
-:10C8E000C747953ED4BBD7DA7B27734E12C5B6F740
-:10C8F000FFEF77D3CF1EF6D98FB3F65A6BAFB5F6ED
-:10C900005A6BEF215EE2FD5A47C8E23D8B6FB410CF
-:10C9100042C6FFA228395A44C85253D210924CC87A
-:10C92000D7F07703214DCBC3D7F7D513B269B9A997
-:10C930009F429F4D5F0E9F464A0889255A7CDB2403
-:10C9400042562DB7F553FA75B51F68A32F9D846C19
-:10C9500056829389833E430A69CC23E4D0129940DE
-:10C9600079B1DB1432D2268B5FFBFD4DFDA1BC48B3
-:10C97000F6124F577FEDF399E5AE7EF0FDDF50984C
-:10C98000605C7D40EA777A38FDB71270F91309E9E7
-:10C99000D3AA9C8A9A08FE7D4DFFCB6BA1E5C2AE5F
-:10C9A000B25EEFB7D9AC84E492B876141E4553D684
-:10C9B0003BDFB4078A607C05C7D7C291DD40E71F23
-:10C9C00037AED165539557490D85A40F7D52580157
-:10C9D0003F41A71C7A9ACE336BE983A34FA71292EB
-:10C9E00079D4D20C7825AD4F129246880EBE4DE711
-:10C9F000AD483E0FA17468CE2BF64AF479EC590B82
-:10CA0000C353B615F16490BCE937D3A751F6DB6088
-:10CA10007CFAE783F11FCAB66C5D9307C58009F005
-:10CA200090B5830E98418BC19CD53E85D289A29B3F
-:10CA30008C86FA375A7C745E3BA4CE722594C3214F
-:10CA4000036B4F4804FE6F8F2CF17AE2535C84EC49
-:10CA500096245E5F54599145DB2BB6418A9790B975
-:10CA6000AD435BF4D741BD2CFAFBC8483A3FF81EF2
-:10CA70002F035E7E7E84D707AF6BA9E84BC737884C
-:10CA8000EF9320B4DF23CBAC1C2C6D81F17797F3AF
-:10CA9000FE41CF6ADF1884E7669D9D9025B6B216E9
-:10CAA000ABBB0BDE95F61B5B1AE9FC2E7AA2497430
-:10CAB0001AA476EBE93442875A352DE0073C12E29E
-:10CAC00025FEC1849C9528724774D14FBFB72C981E
-:10CAD000495F5D3EFAB7A422FAACD7458F2650FCD9
-:10CAE000D5EE0B98F4F914CF7A5F3033AFAB5FED2E
-:10CAF000DE492440F9A6BEBD189F3DF43BA6C8FF01
-:10CB0000543F93E12ABE7731F246DD2E5A55AB0BE6
-:10CB1000B458FB607BC2E8DFF3FC44FF8BBBDEB89C
-:10CB20001DBE77C9134D9B007C19A178E9A19F68B0
-:10CB30005FB7AF8C00DF5FB1F89A6CF4FD5D76B63D
-:10CB4000CE88D2E085F66153ABCD4BEBCDFA56BF24
-:10CB500097B6A7A40CC923BB9EAB6C7D713CED7B43
-:10CB6000EDFA099B48EA44CAD7C11AC5FB34817261
-:10CB70003061082DAFAD55863752905614FF71586D
-:10CB800011949FB312232D37D51C7115C13AF21A97
-:10CB900008152F64EDA8B01BD67173AD61DA76E08D
-:10CBA000DFC862D79CA2AEF157DAF508F7EA57E87A
-:10CBB0003A1B4A9FFAB05D82FEFD1402EBD06CA7CF
-:10CBC00074A665B33B8504F3A09D752DACC7D5FA5B
-:10CBD000406539B473CBE469FA5D73BFA995E51478
-:10CBE0000E975396740847C5C9B9B4BEC96600C943
-:10CBF00046DEB0CFDC0578FAB9E26D8075F873AB2C
-:10CC0000D516A4155436FA60DD2AFD1C21281B75A3
-:10CC1000A4214CE1CB2C26FEB0B50BCE376094118D
-:10CC2000F03420BC6BCDE14965741CCB62D916A4ED
-:10CC3000DF5B5DBBAE633CFDCE7FD63E7FA291BE87
-:10CC40005F93A61080C3EA50228624CAC7B7501843
-:10CC500029DCBB1BFD36909F31A742B6D17A4B5FD2
-:10CC600003F1C4C9416B112DC7C9A75487E233D35F
-:10CC7000FE317BE0651BFDEEF0D7DF34417FD70846
-:10CC80005986651356189D934AD4E3D8C6A8C74958
-:10CC9000A950D73B26AAEBD3A6AAEB5D77ABCB195D
-:10CCA000B3D5E58982DFA8CCB196D279B02A628962
-:10CCB0007EBC9C24217EDE02FC5B0A642FE0C75C04
-:10CCC000BBFDEC5C5A9F09F284C24F8690D0D3948E
-:10CCD0009E87737EE889523C1B531A3CF6A2EEF8FD
-:10CCE000C8CC36DD0CF4B2F6556C84B6B7BEFBD1B9
-:10CCF0009730BE95C4B5CB03FCF84E037DE1CF451C
-:10CD0000E149847F7800DF0D7FFE11E8BD133A2FE3
-:10CD1000E03BB356C1EF3F3CD513D2E5B1E684B654
-:10CD20004FE2ED934C6B3B7443E8F3DDD58B7449D4
-:10CD3000DDF19A461A245897943F505F902A82FA60
-:10CD4000E221995403DFD0E54A603C1B74A072E6EF
-:10CD5000C61403F2CDDFB97EA59C26437D9A8D8D46
-:10CD60006970CF36C37A5E7994F1FF4A031BA773CB
-:10CD70003C0F7E145510C849A35DC6F1C438EB6C56
-:10CD8000BC0D2F3BEDACBCE748CACDB02ED74D4D06
-:10CD900019067C62944900C64BCE32F906D0F99947
-:10CDA0005F3304253A68B2428EE853687B0BB9C7FB
-:10CDB0004FE1D870CC12D4D1F7E639FF61A34826F1
-:10CDC000857606F79E15DEDF831C8855298847B3D4
-:10CDD000B3D536AC88CD2148E14B817F50F958D688
-:10CDE000AFCD06F43497B5A2FE3617B7B6029E361D
-:10CDF0004C94D19E48992D233F9BB3C327FAD2F779
-:10CE0000FA39B20DC64BA18ADD4007793CABD5EFAC
-:10CE1000877129CEE552C62A302ECE907E2795E323
-:10CE2000D5E1D87BBF44C74985F186B0F680273B62
-:10CE3000C793D7EE41B81D7CDCD4BEB4FD10364E8E
-:10CE40007369D738828E1B2A4908E013DF15E37413
-:10CE50008E4F7C12C855FD6F28DE289DA41C13023E
-:10CE6000B772010919F3003FFE86ADB8AEAD641B81
-:10CE7000AC17475639F051C6B18D93E521D0CF821A
-:10CE8000DFD1CF2121E0E30C8598AE4F01FBC58FA8
-:10CE900078D4AE57F791D629748D74D245BB7EDD18
-:10CEA0000A69D1A5745FC76E87A3BC60480FEB59B0
-:10CEB000B35EDCC762F702D36BD7F596844BC580AF
-:10CEC0001712DF5EF7ED659D2E7C623C102B9DEA0C
-:10CED000098AFA1CCDF708F9CA086589C89EAFFB14
-:10CEE00080DCB7F3F540F5155DAC7B86D9C65A6199
-:10CEF0009D2E22C85FE52FACBDF33774BCCFFB1964
-:10CF00006CA057B28FB576807E24FB02FD810E9B0C
-:10CF100094C04F1268FDA693E904E4F66A339906BB
-:10CF2000FCAD703ED7EA97957CDD7840CFB9FEF92D
-:10CF3000A7B007C37DD306D9E8DA5BF9D8E1632649
-:10CF4000E77FA39D45FAA39D9575A4A3D10ADF6F42
-:10CF50002D6F3151FC9A5F67ED9B6939A800FE6A1D
-:10CF600072611D1ECE9E8B7852DE3612E0D3C13A1E
-:10CF70005F08CAE41D3301F9BBE3B9BBAB3D207FB9
-:10CF8000D22678400EADE3EBBDCD2EF5882FC5E05F
-:10CF90000B803DA17DFF08E017E9E93F5B45E938DB
-:10CFA000F8290359432B0BE5992D79B02E5653F9E7
-:10CFB0004B6B67EA3C753F96BAE8F30B73D9763B47
-:10CFC000EC3B969B48C048E775452201BA38B31D33
-:10CFD0006F9481FCC9211109F46C4E03357881AF3F
-:10CFE000965848208EDFB3AE28D8FE1766DF763B12
-:10CFF00097FF262A07F4EC9FE4E7297E52E560328A
-:10D000000AEC17FD2ECBFB203788A3C2D7B9DFC8A7
-:10D0100007FEA57A9F7E6F0F9FBF9EE2503F8CFE5A
-:10D02000679523C621DDDB3FCFF1A398AC11909724
-:10D030008AF5F849942F36E5427C3B5388E91B5228
-:10D040004342FD2486172CFFC086E54C2A7F8DC302
-:10D05000D0EE0F1A01CE24B6FF203E9FC79106EBFB
-:10D06000852092B34CA4C544DB21B7D3F5E6261D39
-:10D0700066B49B8F100FAC078A31FB9904145904D6
-:10D08000F0BA8990CAF875209E0536462765A90E24
-:10D09000F74B835E36233CFA061232833D04B051CF
-:10D0A0007C2B4B484881FDD65203B62BB079B09FFC
-:10D0B0008134A03DBBFBCBF732404E5B8E527B6C84
-:10D0C00028D059463965B1A8D71F218D88A7D39C90
-:10D0D0003F362FB7219D3BF7678137399DA38DA040
-:10D0E0002F7296A4A8E82BDA655DC92481E1F1E3EB
-:10D0F0008670DCACBE47245204F53958BF79B9E7D5
-:10D100005BC6CFEF657C37F251EFE36761FDE6C8A0
-:10D110009BF6EF51546C8A1DB1FB3D5DF6B516CF01
-:10D12000594BD47279E83E7559E0C5ACF7392651B0
-:10D130009C9BEF95BD5BE978D79C54B7ABCCFB03C8
-:10D14000EE6FBBDA471C53A03DDD7F6FA56FAF3D8F
-:10D15000AB6EEF2F7BC50EEBB8AB3D83EF862BEAB2
-:10D16000765AFA68E1A570396F8B836BACC9A8AAAF
-:10D170009F56D50D2EE71D7170DDE852B70F34F6BE
-:10D180000CD7CD85C66F844BB4BB75E4D5B5D3CE73
-:10D19000634AA5B117BCB3F6774CBBBA71EFAAFED0
-:10D1A000E676F72CD57E2788FC7EB3E4BB26853E49
-:10D1B00067C22BB017AD16B47BB5FCB29DEBA7EBE5
-:10D1C000C19EA34F7FA2EF7AE83706D61D2D1B76AE
-:10D1D000FEF14E902FC79E1D980E723D13F41CE277
-:10D1E00093F915F6D4B8D0AF3095AF53AA4F9A4102
-:10D1F0005EECD941FB2531B8E2EDA7D41AB6AFB049
-:10D200009118AE67612FA5109BC4F6E3CCDEE9ED63
-:10D210003BDAF11BED0CEE594BC7920FE83A7CDE7E
-:10D22000602B53607FB645427B6056854F9748F927
-:10D2300063748B847EA3590FFC6038C89551A73D59
-:10D24000FBA2F4FDAC90DD0B9FADEB20BE10E5AB77
-:10D2500074DDA2E21FD1E71387A9FDC3CB8B80DF6A
-:10D26000AC3E0FEC37AA00223ACE057D43B10DE467
-:10D27000E6F7AD3E909B55537D6FE17CFF41AD12CB
-:10D28000DA6E0E9B3A79A16D92C143ED8CAABB3D3B
-:10D2900023C1EEA90A9B7DF83411C542E75145ED43
-:10D2A0003178A61B886286A78598E059BA82D95F33
-:10D2B0004923FD862AFAFDAAF69FFE05FACD5322E0
-:10D2C00087983D19C27957B5BFF657B0D7E6F8FC35
-:10D2D000069017837618984DCAF96170585D0679E3
-:10D2E000105F2E8EA8CBC38FA9CB7F4A61F83D205B
-:10D2F0008506017D0E500507FBE2E06E23EA8BC335
-:10D30000078D489F85E72D5BC1FF3476A115E5FAAF
-:10D31000F99F99D11F75400E3F0BE5E0B309B8AFF7
-:10D320003EF4F68152899617FC225186FA17BFD433
-:10D33000219E613A7AFA7EE1B303B6AEA1EF170EF1
-:10D340000F97DAE8FBE70712D201F54A6808CCEF3D
-:10D35000F9AF74387E6CA731B48DF2C3F9FD3F7D0F
-:10D36000F641FAFDF33B3353244A976B411FD076C5
-:10D37000A39F3259609F31FAFCAE3E202F16EE304B
-:10D38000AAE6B53545E2FB194F12F05B6FFEC453B8
-:10D39000AB7F8AFD0BCF9E447E3BA00FCA1698FF41
-:10D3A0006AC65FDAF63B52D87A127040BF3C4A9F99
-:10D3B000CB1F59EE013F5AFFF56AFC0E08A9CB615D
-:10D3C0000ED74C12F73E0FC6CB5FE5023B752B41E3
-:10D3D0007BA6F0ECBB77E6811D6D64F683168EFDAF
-:10D3E0001C8E9FFD8C8EC3E4838ED9CF74C6743D92
-:10D3F0002EE47CFCA2C4EC57FAB72493F2ED425021
-:10D40000FCF95DEF176AE010E3DFCBC777F07D75BD
-:10D41000EC751DD2E3DCF2EAE1A7FB7587E7CCF2FD
-:10D42000860115FAAEF2DCF58B8EBA69BF9A3D4ED5
-:10D43000DC278AF7353B5F4EBB8BBEBFB043F18222
-:10D44000E95A33FD99474643BB9DBA30C00BF53EC0
-:10D450003ADF0BE15792A0DDDC4DF661BA383ACCE9
-:10D460005B7FEF808A3879F85DD78358BF357C7F42
-:10D47000FBC2C88EF199C0DFEB252F345B18BE6D5F
-:10D48000CA2D60AB6CD279FBD1FA5285F875C370A6
-:10D49000EB3D159E357B9E3B9A41EBEB0F8E28852D
-:10D4A00079AD91FD370F06FEDFA2473F96162F9FFD
-:10D4B000707AD3FE1199F65F73BBB53A64C5718F6C
-:10D4C00040F970E1361DF8D993CE52F9C4DE9F942D
-:10D4D000E99A3CDBBE7208F8130FE8AD2DC0E707F0
-:10D4E00012191D82BB7528E74984CD6334F71B2FC1
-:10D4F000FC539B41A1CFB367572495B17584F205C6
-:10D5000084B283CEAFFAA9C1B8EEE6AD57AF13D15E
-:10D510004EC03B3FA4AED7F2474AAA5857A4309E0C
-:10D52000CFB4ED5227060DB0AE6A9652791C67FF54
-:10D53000D49C6E3580DDA4FD0E588044D05587FC08
-:10D54000493C385F339B2F35594D74BEE7E05FCCC3
-:10D55000EF2DC1BE7C818453240B07920A0FC5E7CF
-:10D56000C2C9A4129E07A4C8233A2ECFD0FFBE3B47
-:10D5700001E5D9055BF499FF04FEDB95ED0DD2AA18
-:10D580000CEE97BBE08924A5D0E7655817C07F361D
-:10D59000565ED04EE5395DDFE72F1A50AE37865F15
-:10D5A0004E027A5D78D62CCB942EE7F7A496833F73
-:10D5B000E742F8374930AF73E1D472F0CBF5266F0C
-:10D5C000B4724AE8F3F7E19FA3A89D96EA1B960A76
-:10D5D000FB9DE65430C6497A6A4371430FEB5FF412
-:10D5E00073181A8A3D2037BE6FF5C2FABC21D5C325
-:10D5F000F486C4C6833F1FADFFE458EA36A0FFB1EE
-:10D600004305C9A0E73F219E6490BFB739FDE5A956
-:10D61000B4BDABBCC3A703FFDF04E26DA27D3ED067
-:10D6200079EFB3513CCF2654EFC0B32460407F491B
-:10D63000B313E19AA5908842F97416E8C5215846BB
-:10D640003CCFDA24859A281CB3D7AAE739B7CDD8BE
-:10D65000455FFADF7C4205232CA04D71EDE8F8F31D
-:10D6600041FF51FC2D309148021D77C17675BF8571
-:10D670002482F0D4ECFADAD8131EFFC2F1789BD3DF
-:10D680007757AA4A7EE9517E2D24FEEBE1BB0BB908
-:10D690009E9D633C8470D43FF0C080D9D46EB8BCEA
-:10D6A000F4C101B353C10FC8FA91F512F2DFC20AF7
-:10D6B00012C9A6702D6C972283C10E7893D1478C26
-:10D6C0004FB6B07677723B650EC507E8FDD1BBA4B7
-:10D6D0006022DDC7CC31D12D18C80F3E2FA84FA630
-:10D6E000E56AD28AF3A9255184E37E4E3F8848013A
-:10D6F0003EFFF226A3DBE8EAAD3A00EAD8A1528C5D
-:10D70000CB7D4ABC483F6A4F10734A77FE007CFBD2
-:10D71000E2F053BD495D26DBE3CAF9804F5A8EC360
-:10D7200073DDDEAF8DBE1EF0FB44A73E090D9834BD
-:10D730009874B357DFE3F87FE2B6B96E58FF8F8273
-:10D74000FD96C1071809F292087F44C444C7B70C7C
-:10D75000272AFF04B58BB0DCF6F86B37ADCF226417
-:10D760009D3E807EFE593AFF5108497DE60CAC078C
-:10D77000BACE927D390ACA015F01EE5397327A3CE4
-:10D7800039AC6140430FFB5301FF3A291C91411E04
-:10D79000EC67FA3DB124A60FC4ADAF5F72F9967C79
-:10D7A000387A3413F8E63909FDE91B24D22C513CB0
-:10D7B000BB2859400F6C90DE3F0A7A63C34D1ED2DE
-:10D7C00044EB4BF64E5AF40AEE712D5E884FD4EEC0
-:10D7D0002DD3D55A71FECCCE4C68D82AD3FAF47B1F
-:10D7E0000A87C1FAA0F3BE67327DFF02A7B7DBCA82
-:10D7F000F8C1B52298B718FCA987FD8B5E81753DED
-:10D80000D8827EAB748AABC4147CB680FDE8228DCE
-:10D8100012B45BE594901EABAAC8B45F1621D7285A
-:10D82000C929EC79923E258534831F365DA1F628FF
-:10D830007BDF0CDF792289C1E59475F74C027B7898
-:10D84000182BA72C937CDB90F91F437CA51B492543
-:10D85000CC1BDE83FD4CC1F0EDC1FA10C29D3EB67B
-:10D86000A118E048EFC39E0E43240BC6392EF8A43E
-:10D87000DD2D839C5EC2F5ED923D65E929B4FFF193
-:10D880000B2605E4E77197B0FF2256B0FF48DF4250
-:10D89000D69EEBB525C563D381EF1D39EA7697F5A2
-:10D8A000BEE4E1A01F4EE8304EF399D5976CA7ED8A
-:10D8B000AE35B07968E97F96D3B5FE8A444271FBF4
-:10D8C000FDFA699FA35D5D7F4551BDBFB0DC444259
-:10D8D00071FBFD9AEAC3E3A15D2DE95805FC581BD5
-:10D8E0004E20A1B8F571ADA5E7EF8A75517F454788
-:10D8F00082C391EDB3C02F795C1F5B3507F8F0A0B0
-:10D9000084FEA37ABA8F0EC6C375259504537B8215
-:10D91000334DFD9ECE4755DEF705B62323A349F0D0
-:10D920009D4BB668929DCF0FDA097D77392407F5B4
-:10D9300043312EC8F41EF875ACCCAE9D04F455628C
-:10D94000499313BBC615F5305E4ADC3C2F4D33902E
-:10D9500008D22586DF05BC05FB13B2B1FD63830742
-:10D96000F47FFB21C49BE09778FC05E3E3444D1D65
-:10D970001199CA8A7C876D4DD100CA7A87855C4827
-:10D9800059037EC9349DAC921309259D7203C5D4F9
-:10D990001310B5423993BAA6624C7C99B5EFEAEF01
-:10D9A00098007ECF9222D6BFC8E1FCAF157DE17D05
-:10D9B0002B93BB4A2CC79F18573669CA565A1E1C50
-:10D9C00057B669EA1D9A7A97A69CC5DA5F488CE437
-:10D9D000E8BC54DF3BDC13142A2F2FB82333E80EA6
-:10D9E00096AC6DCA9C5041E5586D09D3C775ED9250
-:10D9F000177D751C7F755E66275ABD51C3AC22C06A
-:10DA000043C751902B35FB249B44D78135BC2782DB
-:10DA100065E8E789EB1796B05F4DF87DECD7EBF83A
-:10DA20008532AEF33585A758BBF087A8F757355731
-:10DA3000613C5DC48B75C4EFCB94BAE2C542BE5E57
-:10DA400072FB5E96195FDBE2F74FF5306E9C9F46E6
-:10DA5000B47F6770FB1FC0AC4858F27123D8AF7F0A
-:10DA6000AAFD7004D873EF40935120AF4303E0BB8D
-:10DA70001B496000E8C9EFD7F63B24D376EFE9A352
-:10DA80009B2126769FA318F1F75E62345BA2326673
-:10DA900069DBB5ACEC8C6E067CFEB66D0C2B674773
-:10DAA000B3655A5EE698C7CAFDA29BA1BCBD6DF2E4
-:10DAB0000485E2FBBDC1D16C1DED9F1F9C32A1828C
-:10DAC000D63F6DEB793DD73A981C11F0FD57BEAFAC
-:10DAD000DA01F3A961FA6733B5374D545ECE587059
-:10DAE0006EF7D3140F337E988072ECE90B53263017
-:10DAF0007B3CE8574AC1DFCAFE503FA29C57D03E4C
-:10DB000071834E4CE9A247624E8707F5C7C0863D38
-:10DB10006067A4CF2842FDE14DF5FD0EBE2B9EF7B8
-:10DB200067B0E7EF1C3626B77532C69FD31F4C444B
-:10DB30007BEC51339B0F5D37485F2BA7C70A07F378
-:10DB40004BAF70303FEAF4D47138CEDB926F8389EB
-:10DB5000E2FD6D3D099A41CECEB7A0FD7CD7562A95
-:10DB60003792C18FCFE06E7BCC1D82F8F95D12F148
-:10DB7000835C11F2A3CDEE73A7C4ED43DA8A69D9B1
-:10DB8000DAB5EF6C9BE4735B1CF04C9321CE22E47E
-:10DB9000525B1EEB27F4517A13FB4EFAA303B6C176
-:10DBA0003C1214E62F9A33AD605B23DA03937FE7D0
-:10DBB000007BD9E77383DFE1F4FC7C19FC48823EEB
-:10DBC000E7F37D9BA0FE4EEE87177412F4FC1D9FB9
-:10DBD000F72C1DB527E87C8F3B03381EB52F8670C8
-:10DBE0007F15DA17BF03DD1E875FA24447C0FBFF26
-:10DBF0008FF07408E8FEAFE2A976299517F255C8B0
-:10DC00000B8EBF7552449FCEE405EE9FE13DE89D2B
-:10DC1000CDA9813FC0F8E2FB331EAC457B52C095D5
-:10DC200070FF0B957790EEEB4C6BEFFD19E81567E5
-:10DC3000977A85DF917FE7BDB74D186778CF10469B
-:10DC4000B9F91EDDFF34827CE171F2D21F2E3C0E49
-:10DC5000FB3F31EE38A70EC75B2DF9DC30BFD59402
-:10DC6000EE26807F9201ED7FA157DBECA10D90A7FE
-:10DC7000D0765B16E6295C262C1F24B83401DB5DC8
-:10DC80002B9F22E0C78C8DB2619C9AF209D6B74DCA
-:10DC90002FC07C11CA0F4133D4537E82BCBAB66206
-:10DCA0003A21186FFA40AC87FD31EE6BA79B70BC30
-:10DCB0001EF884F985FBB37C88B63CCE87F3F391DC
-:10DCC0000FD39A98FF9128BE2193E2F47C9E93F99A
-:10DCD0007D124AA2CFFD2FE0F9B566B46741C76255
-:10DCE0000CA7351DC7A3F4B738991F00F96CF623AC
-:10DCF000893CFFCC5B0A787D2891F1E526338B2F98
-:10DD00006DA2F633CA45CEBF22EF2DC0EDBC68B57B
-:10DD10009C04F682CBD9E95FF0C17E1FFDDBB47EA7
-:10DD200066547A1FF66B3383BA8811F65F2DE37C55
-:10DD3000D1B8FD0BFC417CEE1E2E57C97A827EBF06
-:10DD40007BA05F128C6F498278E43DD01FFCABCB87
-:10DD5000C6A9E26E039D6C7D0BF8B4727FA093C9D7
-:10DD6000490AB72FFE3B627CED7874FF39C8E9445D
-:10DD70003C4792611FD1A8433A6AE18CAE677EEAC4
-:10DD8000E8FA5CE43B315E6F70FE5917BB57A27A2C
-:10DD900070EE58B62F17FB9E397CDF4C96A9F775AD
-:10DDA000E057E92CEBBA97B5FB4488A7ABDB33BB54
-:10DDB00025A12866C0388B4752C12FF0D51B1E26DF
-:10DDC0007D47BC09BDF7A499CAD314D87E4BC8B708
-:10DDD000EB1F48403DE6308406005FDDEDF460BB9C
-:10DDE0008D90D7827A95ED973F3D2EFC1CEA7D728F
-:10DDF000BD25B605F0556F61EBE8D2C1445C07A4C0
-:10DE00006F7406E4855D3E6024C0BF7552B400D6D1
-:10DE1000F525C95785ED1A133CB09E3E903B10DFA7
-:10DE2000F580410A577DF0EF988F54BF4FBD6FBE0C
-:10DE300044FFABA6FC7E498E96C238421EC0FA470C
-:10DE4000BBA89AC569EA6412847DD5B5F2CCF9A85D
-:10DE5000FFA767906DF8FEFD02D84709394FDB1D1B
-:10DE6000915218DBC07AA9E1F8AB934F61BB1AC895
-:10DE70002B023CC2FE0AFC615019E7C7AD5B7B1E5A
-:10DE8000F39AEAF6AAE95CD3C507D2D712F48BE37A
-:10DE90000B5CC741A41BDAD9B0EE2B589C39919783
-:10DEA000132A3B30CFA99EFB3B9C87A3E3419E24D2
-:10DEB0009684C94CFAAC3FCBEC8CD1ED5B5F867D90
-:10DEC000B4BDB2231BD8BF9EFB03059D059CA3DAFE
-:10DED0001F43FF86B04FE2F6990326ABFC0C2BB034
-:10DEE0001FEC5BE17B5178E506F233BDB68EEBB5F6
-:10DEF00004D80083FE6BED8FFA0FF413C825B1EF41
-:10DF0000053905F2E13367F94F418EAD4D2BDFC680
-:10DF1000E419E52FB0E761B334AA773F9EC08F685C
-:10DF200007FBDF6FF2D3FD92F3ABC3C0E52E617E3A
-:10DF3000B9C5AF39855F0EE36F8B254F3AF0EB190A
-:10DF40005D00FD6FF34810FD42F3C1EF459F357C46
-:10DF50009DCFE5FEA4B9DC8F047EDDF83821F857AB
-:10DF6000E3CB0B08E35FB2C3D8953F037E9F0A1251
-:10DF700049A4E3D5825F0A9E6175BF3A12637CBFF4
-:10DF8000EF6BA32A0ED9C6E67D0FA7BFBD22A4035F
-:10DF9000F9B0C1CCFC51426E8C5EC6FC56C9C37C44
-:10DFA000792B81CF5FD3A33FE37F73BA093CDDE6D2
-:10DFB0002CDF05F8B7C03E0DDAAD34A2BC3C4DF500
-:10DFC000F01EEE47990CFBCFE5810190FF4D145BED
-:10DFD0004EFCFE543CD71C305703FFFC89EB31F15B
-:10DFE000FE31A79EF9E15730FE8D3526A0BD4DC507
-:10DFF000C610E0AFD27CA10FC910F06BBDAF677E39
-:10E00000E0BADBAD01182F2A3339738ECBB3734ED0
-:10E01000967F27CA9DFB3BCE3F22BE077E9E78FFA0
-:10E02000FAC79DED1FE37624C1F9AE9BCFF3B73B52
-:10E03000F95846799450E447B97BAD5C8EF228F6E6
-:10E0400091D50378A93C5F331FE6F1C9340B8138C1
-:10E05000DB6CEEEF95D2EC0887F0EF7E5BFCAB72E9
-:10E06000CD009493A23DC472A1BFD64F7C80CBB1AA
-:10E070000384C11B6C3632BF3C87FFC0D98121E0CD
-:10E08000636AD70641CEC5F69899BEA37628C8D74D
-:10E09000037BFB87603EEFEB99BD10A4F297F50F71
-:10E0A0006C003FC8815F3ABD90D753BFE0DC10B031
-:10E0B0001F0F9CFDD9AF7E0BEF0F1ABDB0DF3BC029
-:10E0C000FDF235864801DACB3C9FB1262952007E0D
-:10E0D0009F1739BD6A2CB44CDF579802D96923BA0F
-:10E0E000E267D00FDE9F0A31BBFC14617C105CCB71
-:10E0F000E29C14BF6E8023B63A1DE36F302FA0C39D
-:10E1000007070723DCEBF4BCFDC3CC7E3BC5CBA7E4
-:10E11000F617637EDF65BF01F371EB1F65F6E22C36
-:10E12000D9B36529C8CA9712D0CF38A7ED04C64322
-:10E13000EA1F993711EAEB172CFB1EF9863801E824
-:10E140009578FFF62512CBC17D70757E3842BF7B76
-:10E15000A97D809785FB5C185CAAE3799FA7297E3F
-:10E1600001EED8413DE2FF6AC747876129D36FE8D6
-:10E170000F8F8FC7A03E50C767BEAD7C491F2D785B
-:10E18000807E3F9812B835CDC9C41DD0BDFE25375D
-:10E19000CABB0F1EFE2207ED8956164F38ADF7CDCC
-:10E1A000807562AF881866C6D95FF3D2F8BEC3C85F
-:10E1B000ED462A07E3D7BDA82F2D57AF33F19C9B1F
-:10E1C000C6ECC9441EFFEF5E2FF25EA718417F32F6
-:10E1D00097128CEBC17173795C6EF4D9D821C8A306
-:10E1E000AA091763DC2F775904D725C57704ECFFFC
-:10E1F000D31B12993CA1D38471E68E2468B7CED587
-:10E20000B17C86B9466A07333D8EEDCF6C48473CFA
-:10E2100094AE60F65FEC3909E5A2884F5611D6FF3F
-:10E2200085E6F7833ADABE6A87544C452BA96A2EF5
-:10E23000C37C87059BF290FEA3B9FC9D65F4156C29
-:10E24000007E7B2111F98D7E0FEDED1AC8E91A864B
-:10E2500072C900FAB07A8744D690F878AA860F423D
-:10E26000EA78CCE83093DFA037489C9D26F410E88C
-:10E270000BA2B11FD57C11E4712A469FC701AF23C1
-:10E28000BAE43F62EC1BF420B5A3DB601D9796B3A4
-:10E29000F516DB23219E6B49038B1F713DD4090FBB
-:10E2A000D76367744C6FCE353E86CF9D697908C7BA
-:10E2B0000288B360DC206600B9D81B5FECEC852FC8
-:10E2C000043FFC8CCFA3E62C895C47BF57B38C443A
-:10E2D0006A87B067E210D4CB4C3F9B987E86A7E557
-:10E2E0002AF4B4563F6BF5B1560FA71B98BE157CA8
-:10E2F00010EF97077B64F4B2908EF95FB36C90C710
-:10E3000027E8323DD57730C3D9656FD59F34993C26
-:10E3100043A1EC27F956F02B95556681DF9ACA6F19
-:10E32000587709144F5BE9FBCDDC2E1F91C5E6EF52
-:10E33000E2F93A7AC54F8AAD40A70EDC47C79C0484
-:10E34000F7B502BF9B1369BF61D08FADC7CEFE2664
-:10E35000D26C89EB5F7EC08CFAE4F3FD89985F4252
-:10E36000F543AE9D8E97F60EB5CF69F9D28144D4B0
-:10E37000EF97B8BC77087F055985F4FD13A7739014
-:10E38000946782DF9748133241440ABBB1D6DE9BC3
-:10E390009F9ED7E775DCCEF8CC887AF6737BF43E87
-:10E3A000285378301FF80F5C2ED4EF1D5BFC20E45F
-:10E3B00001F8AD5E86D54031D80D46DD92DBC11F38
-:10E3C000345EB72CF6009D476DB615F38C2B72DFCB
-:10E3D000FDE3745AFE68AF9E1881EE4F4F498E40A0
-:10E3E00037C5E7EA493FCF0FE955E7D816EE509712
-:10E3F0006BC3EA723D893BE74651B0F4DDE2EB8F37
-:10E40000C4F1C95769898E338308C8142FE44913AE
-:10E41000DDDDC9811EE4A5787EB1DC7BFD113DE622
-:10E4200099E9D3591E8D01EC9A99C00F3DF46B4FB9
-:10E4300063768DD1D87016F2D58D2F1ABD8DB4D7D5
-:10E4400089B44012F4AF936347819EC6DC0B43400E
-:10E450000F96E7FE03E3679FFF8878013F9F9BCB02
-:10E46000D0BEF97C83D903FBB2B61C2BF357BC2476
-:10E47000852466BF4F1C510AF1529C03A95F7FD3CC
-:10E4800047EC700531C9485FBA7B71819CF1E17E30
-:10E49000EACC248B6D05ED57BD9EE9DB1AD29104C1
-:10E4A00072604A3AA79F6E97C144FF99D7EC1BD080
-:10E4B00048E15DE8B7E0B91AE54BC50FFCF5100C73
-:10E4C0001967FF0F4C67F2A0D6143594C1F7FF31DE
-:10E4D000BBD299DFE5DF32E8997F4BD9571CC9A43D
-:10E4E0005DE72D9D85FB9CCEF8F30696CF34EF813A
-:10E4F0002A7CFFF20623CEEFCC4109F9FCCC66362C
-:10E50000FF79EBCD1EC8BBBEC1CEF6B3F368BF9E8C
-:10E51000E77FE34730AF0F37DDEF05FFFC87847DF2
-:10E520002768637EA80F6D2C4E0E6D619C0FF7F669
-:10E53000413BA67AFDFC899867B659E7053B821CEA
-:10E540004C44FFCEBCCDF7FE7614F88F26DF59027F
-:10E5500078B8C1BE240DFC25B49D3FC4EC6296BFC3
-:10E560009B32F2195887377C39B6E306B09736D319
-:10E570007592C7F2E3C14E3FB2F946B44BE74DB2D4
-:10E58000D8615E9E4D4F8F07FDF1E1A40C19E7B3F2
-:10E590005B2236C0837D691ABC9F2729FE9EF8E95D
-:10E5A000A334E6672BCBB57A23D0EF0F3AE413BA46
-:10E5B000AE6E07FD59BB598F76EF91C96FFF71BAE7
-:10E5C000A36B5DCDD3B5DE3E3ACEEEA9DF748BE012
-:10E5D00013122985FD14C389767D19739715003CA4
-:10E5E000DA75366F4543018B577DB7F54636B1F581
-:10E5F00056932E91AFE5EFB4DE7E90EEBCFAF54671
-:10E60000B25254FBA8EE722D88ED84BFDFE425BE24
-:10E61000A7AD18D7F549E0974B57B07E533ADBCFFB
-:10E62000287F5DBCE3755817E9819500472EF115E9
-:10E63000031F7962B672382B64E5761CD9C4EC6688
-:10E64000B0EF81DEEB9CE49935717E87F5E9EC3C17
-:10E650001B5DFF8FC03897DEFAC751A04F5DCE8596
-:10E66000212CDEF919C607ADED2CAE6CF5C630DEF7
-:10E67000AE77F891FF845CAFF732BDA39DD79FD3EF
-:10E68000D9F98B7A470CC739E062EB50F8DB372EAB
-:10E69000B5A09F74A32364667E852001BD3471A458
-:10E6A0008EC5C5B89D750BF73F9A4A5E26100F239D
-:10E6B0006358DED7EB252F2BA9B4FCDB91E3BC78A4
-:10E6C000DEAEE4A9967C98F7183DAFEF138479FF8E
-:10E6D000CE5786F58B5D3A0FACEB89252C7F915494
-:10E6E00027A1BFE4F5920F1CB3E3E0F71393C74AE9
-:10E6F000F96432DDE4C4E7DB7D6F8CD9638DE3AF71
-:10E700004F5AA54A66EF7A92A70E66FE10D4C3252B
-:10E710006A7C2C7619F0BB6BD3CAF6039E6FB89E49
-:10E72000D1E3DC6E6308E4DF397E7E458BBF63E9AD
-:10E73000DCCF7A77A12A3EEF308473403F9E97D496
-:10E74000FD16B4E8303E3EBF452221FABD733B5F63
-:10E75000C80139FED1D32FE4CC8C8347DB4F3CDF9B
-:10E760004857FB01B57EDDDEFCB9A2DDE5F524608E
-:10E77000EAD3D5FE72F5DFD09F3BB39DFB837DBE10
-:10E78000BE0ED807F1F6DAF1FECEF943DA27A1BFC3
-:10E7900043F8334F1D7B0A22279DF433B7E7C9F1B5
-:10E7A000F98AE2399AD36D0AD08D4EC5DCC2CABD52
-:10E7B000D1ABB7F5F8643A8343D0ED544B9F64C0B6
-:10E7C000A3A1CEAA10768EAC10ECF4CDC4E285F5F0
-:10E7D00064C87059417E8973F85F98D9D361A14F9D
-:10E7E0006AAF65671462BFFB653FE6C57D21B7E28E
-:10E7F00039C2FB750D986FFD15FF5E96CDBF672E74
-:10E80000EE4FC2987F4D5AD4F84D6B62FA2356658D
-:10E81000403D25F07CEDCCFB709FDA037DD603DF15
-:10E82000648C64EFAE71E571BF4614E304E691C4F5
-:10E8300006FBF9A651418447D0A79E352752BB84D9
-:10E840007632E4B524A4603C34C89FC49A423AE3CB
-:10E8500003097C5F4B34F1002AB682D04EC00962B6
-:10E860000CF2631EB5875B0B4A309E8AF6278C0B31
-:10E87000EF671629E84F87768661DFCE6F9D7CC9EA
-:10E88000F30C278AF7D5961EE30F13E1BC0E6D9F9C
-:10E890004DF520D87FC4AB579DD7D944ED66D88FAE
-:10E8A00089F8AE4E0E17BB701FD21105FF88A1D498
-:10E8B000E401BD9AA00B1702DDB4F15EDA2E8FE5FC
-:10E8C0001964D941AF88F338754BC7FA21DFBDD33E
-:10E8D000CE38C8F647750F94E1FBB1EDCC7F5EDF13
-:10E8E00062C4F384F5FB248C57D5F90D2113FA315A
-:10E8F0003C8D40AF20B5C360DFD86667F9516D37F6
-:10E90000D9BC4112EFBF8E6E7910FDD7568CD3FD66
-:10E91000B3F1CBCB89140143E3E253C926A647B830
-:10E920007F3B8DF393A0BF58CF22DE9958E4CF03ED
-:10E930008BFBD7EB66FFC6E2FC2E7921D73E0C7924
-:10E940001FBDE7851CBD05F2464C60CDF37A008BF8
-:10E95000EACDCEF375660FC6B53AEBE15E04D33E61
-:10E9600089F7FFC12DE3FA62FE283F5F77DD5AC8C1
-:10E97000637ED44C54DF8B874FD18CAFA7E35B3DD4
-:10E98000A2FD3D378F5330BECBCB2FFDD847E17F63
-:10E9900054AF1E0F59509C0734757DAF3233E1E1FF
-:10E9A000B563BAF437D5E7CB5DCE2E3DFED0DB1391
-:10E9B0005B877A607D7D8AF9B8421FD73B589E8875
-:10E9C000566EAD7149C2FE1D0F2A76D5B42ABC47DA
-:10E9D000A033BEDB3EC907F72988F86EFD323FE65B
-:10E9E000E582FE77A1FEBF70E61001FBF21CDAFFA4
-:10E9F000F55714E60FA2768444F9D0D45E867E4F94
-:10EA0000483705BD29E8BF80EB25B0D581BFEB377E
-:10EA1000DDF1B40EEC6597EF491C97EF03B5F08676
-:10EA20005DCC5EAF2F2CDF00F2806C9708E8ED35EF
-:10EA3000859FA09D51B77FDC88F8BCF2F9FB9E60F2
-:10EA400079C93BF43DCE3FECD2A17CABDBFF1CFA95
-:10EA500033CF85D871966A25B47A34F855AA65B053
-:10EA6000B44849A86A3AEAFF69741EE03704BD0356
-:10EA700076CA8E2941C873AFA7FF01CA36FAE7A24A
-:10EA8000BDBF719AC90AF19AFAC2998B703DD82C10
-:10EA90003E98BF16CECEF8F00316F437AED9A7AF26
-:10EAA00004BBA994DA49BFA2F066A74CA8F452B9F6
-:10EAB00094A9DB53FC032BC4D57BD6C35333981ED8
-:10EAC0006E96FCC15B4B300F92C4E7E9E4EE63F64F
-:10EAD000D8AB2E66BF89F7AF42E223C5E79860C77F
-:10EAE00058E0B997946802D8C5F5C4F731EC73893A
-:10EAF000DFEA8171E02606B0B31CCB3DE8CF3539A3
-:10EB0000A23F1E8A769382FB0CB18FB8B49FF9BFE7
-:10EB100046B9036F021D4B75D1C76F05BCFD989DAB
-:10EB2000F3250A93373953ACC3C05F6576441FAFF2
-:10EB3000F4607E0DFA1F92AF6B463ABCE42036C0FB
-:10EB4000CFD8609522C5E9192137C6769EA771A056
-:10EB50009FB49C8B977E945A674CC8A2CD5FA776D2
-:10EB6000D905C7FE31558197C25E904D01DCCF5467
-:10EB70004CA3FB43E0CB55B1A332F8E51D1D682F34
-:10EB8000D68625FC4E6DE12F31FF6D21CFB3EACC47
-:10EB90007752A298FF75C995C0F56333E34BD281D4
-:10EBA000FB5FB28BE19FEA4DCC0BEBB2DB1BB19D5F
-:10EBB00018CFC0E309B5DC5F431185F57F7589780F
-:10EBC000C20AEEAF12796CECBB44F194C6FB17D6C7
-:10EBD0004DA29A04E1F22401BCBF30FB65376D7F82
-:10EBE000AA5A66FEEC9684101C0E5D2775F8C0EFDD
-:10EBF000182CEEF91C4CBA5BE279B2B1F1E8EFDF08
-:10EC0000DF5B9E2CCB8BDD306220E69597ECFB78AA
-:10EC10003CF007A924B81EA9BCB8AA3CD92C375B84
-:10EC200047FFCFE4C97A25DF36FA1CECB6ABF364B4
-:10EC3000BD8C5E227EA9CD8FBDE48E282C9F2DBA7F
-:10EC4000E569D0BBFB8C98273771DFAB27C17F39D3
-:10EC5000D144C218CFD5D80FAFA54E29053A5DBE15
-:10EC60007866CB4A02F9D5CF7B59DE9DDA1EE8CD16
-:10EC7000FEC79846DC3EB1D2FDEFB5FF85BCAEE7DE
-:10EC8000FBA9F352EC910298DF419DADA77331B718
-:10EC900089EFF796E7D1DE739E8738775519CD5304
-:10ECA000C5A7EEE91CEFBBC5BB66820FBA87789794
-:10ECB000C2F3B71489890E926D50C5BB147B416FA6
-:10ECC000F1AE08D63FD71FEB1FEA16EF627905CDEC
-:10ECD00007D33D60DFD73863CF3CE381F10C384E7A
-:10ECE000F3FE8410E4B93773FCD75C7DBCEB41774D
-:10ECF0000FF1AEADDC7EFBA0508E18285EB7120679
-:10ED00007FB05DC4BD64DCC7C61ECE16F063FDE5F2
-:10ED10008707A1BF68968867BDC4FC68B378DCEA42
-:10ED200083C90598E7D51B9E67B5A8E3020F039E2C
-:10ED30009DE8E7437FFC7DFF3109FD5373C18FDF01
-:10ED4000A7EB1C04E1FE3C4F0B3BDFEED921853CD9
-:10ED50002CAE6292D136B4C9F07E2115A31B41F4CA
-:10ED60000629D75C435F4B146BB4DED34CCBD4E89D
-:10ED700057562B41176DB7F56402FACF1E72781003
-:10ED8000DE879A597C39B8560AF563E3E2BD61C162
-:10ED900066D907E3EC7633BFD32B6EA6FF3C9AFB14
-:10EDA000089AF53C4ECCBFD748E4083C65893D1F26
-:10EDB000B229953DD90F62BC667D83A90CF09DCD2B
-:10EDC000EE27F9DCE09B86FEE59402BC87A839B10A
-:10EDD000A1A592D5E39AFDDC1CF363FD750A3348C7
-:10EDE000892705E07DCACDEC1B2D9EE7B4AACBDABE
-:10EDF000F88EF6DCD52C12E8EFEED3FD5CD2536E24
-:10EE0000A6FF3E5F93C7E9E2C57849B3DEF3461E2D
-:10EE1000F0FB6A76CF506316C39B9CCD9EF9F60A31
-:10EE2000BC0F8ED8B91D4718FCF9D73924580FCD1F
-:10EE300076C6B7FF2ADC5A785F771730FCDAD97AC2
-:10EE40006D5E2D8518BE18DC57EB1739FF6F968B5A
-:10EE50001F48DE672279D80FE542F0613DAEBB5313
-:10EE60002494C9F2266D283767F27DEE675CCF6D7A
-:10EE7000ACCE4F8238E8ACB3ABF0BEA0B153AC0817
-:10EE80007FDD4B66DCC7D52E8BE6003F6BF108D0EB
-:10EE90002A429ED2FA990EC2EE996951C7F5B4F191
-:10EEA000DA608A5F8678505D79B400E2464FC81F09
-:10EEB000EC7995C935D4AB75CB62CF809F796A4A1E
-:10EEC000C09C41F173E181B7C74B1EEC8EF2EDF2AD
-:10EED000C1FE78BE7066B3FABC1659AB8E1B929613
-:10EEE00014762EAD4DFD1ECE27A9FA758B2332BBAD
-:10EEF000669D213000ECCE1BAE67791217E7CB047C
-:10EF0000E879D14C787C5EC8596F41BC1E28E07608
-:10EF10006F77BAD27680679E172ADAD7025D293DCD
-:10EF20006B385D2F3E774D01D0F5C29E6B0A80AEE7
-:10EF3000EBF4AD3E58179F390303011FA7C7F9D162
-:10EF40002E1479B057CB6FA332FE67F5F078819716
-:10EF5000EFA887E12FDE5FF2D23F58BE6AB09D9DD9
-:10EF60004FEDF2D39DC37BB62E5F912590C3BD8D2F
-:10EF70007792EF935C261204FBABB43C8AFD4AFF08
-:10EF80002613B00385FDAB857F3AC7DF820CDF4BCC
-:10EF90002EC023F7EB56F3B14DA14F999DBD5D42B5
-:10EFA000BFADC9134C1A8DFBAA39C37528577E858E
-:10EFB000E72048BB6483FDC9FCED8D587F69DF2CD9
-:10EFC000AC974D9108ECC36A693D94578D51E73574
-:10EFD000EBF71647E2F7BD148E03B09F4970C40CDF
-:10EFE000C09F7560575310EB14E6DFAE7310F4AB9F
-:10EFF00094EC53EF1345DC76A39FDDE3B2B15DC221
-:10F00000FB9CD20C81BC2CA0AB267E7B7F866F1D27
-:10F01000AC571147BFCDE97B2083E597E5009E8281
-:10F02000190C9F51BD38AFA73E4F78ECD0ED680763
-:10F03000FD85F8937BCE370BA9E2EB73F979CFB955
-:10F04000FCBC27C8E788463EC7976BE2F2CD223D5D
-:10F05000E50DC4E59BC5F78BCF378BA8E41A5BFFA2
-:10F06000E9BAC518D7AEA77CBE7458171FD610FED4
-:10F07000B73EF6019E6BD961447F5A0DCF33ADAFD9
-:10F080003E85FB947A3827C3D623CBC7E6F71CD43A
-:10F09000D0FD1FE6DB86D5F9A8BB7B951BFF77FC6F
-:10F0A000E4FB843CE0EB51CC4BCCA3A65D62EB4788
-:10F0B00003A776DFABF5778B7DEBD5CAA5E3FFC35E
-:10F0C00072E9AD7F935CEA1637E81B4BF2FE1BE258
-:10F0D000061F795AD3C095D822317E1DAFB3FA5896
-:10F0E0005C52C7F216B4F15ACF788C430A3FADE9AF
-:10F0F000795D68451EB6C7386CEDC144CC23A8F6CF
-:10F1000054A39DAD8D4F2E207BC60309FE428EE396
-:10F1100079AC7F351F806476E603E47DC77C0063AD
-:10F12000E677884FBE6CFD343510C727E545D460BF
-:10F130002FEA3D5FCB99C9F82E81E78D989420B1D5
-:10F14000C7F5EFAD5F7626CB037B99E7193D9A981B
-:10F1500080E7F65D0676FEC025B37CA8332E7F6E71
-:10F16000E608D0038C8E3FD97F0781FCC29FE8C39D
-:10F17000788E3E586BF582FE127E2631FE83DCCF00
-:10F1800072B5EBA724F3DFBB7EBE4D6E5C2FBE775E
-:10F19000B5F1B5F5140771EB4ABB0E7AEBD79B5C62
-:10F1A000B935D33F2113E5966F08C629AE521E2507
-:10F1B0009450790DFA79AFD103FB05133F2743D65D
-:10F1C000BA55FBED598F66A3DEBA6866FB07719EE0
-:10F1D00047CC7F66AFF8FEE7ECBBE34EFF6C98CF01
-:10F1E000E9321F9E07782891E995D84E9617A43DDD
-:10F1F000D7A2D527E25C86F8DE7DFF667EF8AEF208
-:10F20000B4497CFF5F94A754BFA27FA5D7386CB7E1
-:10F21000FE419E9FD9E1E3F1293CE720E0AAEF609F
-:10F22000F9748F674A2A7FF37D5CFE9FCCF4B501A9
-:10F230001D2EBC653241DCB3A484C9CF3ABF15E3AF
-:10F24000067561964753B78CE03E5F9C5FCD4B0FD0
-:10F250006C0139F5D0DB56BC77B46EDFD6967CCC2A
-:10F260002F08A05D77E92DF6FE445A601B8C5FBF26
-:10F270002CAA8A4F947EFDE9AACA128417F7E90ED8
-:10F28000A3FA5CD0914CB6FF16CF439DF8A5FB12B4
-:10F29000DAEF4235CBDFAE77F86C659857C0FCDF0C
-:10F2A000099E0EF45BD7ED452541309914EA1FCC39
-:10F2B00042BEA9DB5B568CF70884CDC578FFCC3BFA
-:10F2C00056DC5F5D782023A463FEF2FD006F624987
-:10F2D000E826B02F73E977C0FF7D61CF4DC5E80FF9
-:10F2E000D4AC3BB1DE3ACF83DE650A35495DEB71C4
-:10F2F0009D9EE947A1D77682318B79153C2FB07D51
-:10F30000129963ED2A5B1DEA7CC90519E376023C7C
-:10F310003B33591E8988A3E799E8EE33BF3B1FE6CC
-:10F32000F138FA249EFF4082A6AEBC87FC6F8FA303
-:10F330000BF84459C4D113AE30FB36DF6640BE48EB
-:10F340006C61728350BE00FB7A4CAC632C9CC3EAA8
-:10F35000DB161903F84A06F463FE69F4C743215E1D
-:10F3600091AA8C8178C596A5C30E9B1CE03FEAB894
-:10F370000E48E369B595C3D6322FDD7F06F59ED2E0
-:10F380005008FC5FFE073DCB535C9D80FABE2DA765
-:10F3900006F3142FBD6D549DBFD13E8364850BFCD5
-:10F3A00044F92DBFC77841E25EA9C7FCD37E60F463
-:10F3B0008F60EDC1EF94D8D2111C097E9487257619
-:10F3C0007723855E72C1FE5F91C1EE98B58F9DE394
-:10F3D0009ED56A2F37A13C9558BC658C03E5A4B235
-:10F3E000FA6619F6674A23C17BD2B2B2D839817E58
-:10F3F0006D3619E8FEEB2F753DC6D112B2985E85C9
-:10F40000BC374057AD31761442FD22FE27F2DDC4F1
-:10F410007EA853BEF2FBC4853ED2DAB1DDEC57AE16
-:10F420008F3AED780D1FF7D64FF0B7E0E75FEB09A5
-:10F43000DA61BF964C78BE4BF075B3C8DFFF92F926
-:10F440007173793ECDA9357F1FC2EE0F14F1931071
-:10F45000CB83D247576522BEA2D70761DE7BED7210
-:10F460005D11FABFEA709CD5ECBEB3DC963E2B462C
-:10F4700096C0D3460005A70E2CCC857519A47CD068
-:10F48000AF073E3897C9F29694D5094837E531BCA5
-:10F49000D99928F634A49BF204A3CF69CEE7227E43
-:10F4A0002BFC94273303A3B39C71E7B2965AD8B9C7
-:10F4B0002C7EDE3771E9DBBBE1BCD316EE2F3EFCC0
-:10F4C000D220FCDD85CF572B12F88D3EB757E5C211
-:10F4D0007E6F1CA76BA2D2416CD678FE3C8CF9B231
-:10F4E000F90759DE9FC2EF4F52563BB6023EBDA907
-:10F4F00001CC0BBEAE39823F59F092ED34C6E5A87F
-:10F500005D84E79FCFED97845DA4D28762BFA6DDBF
-:10F51000874DCFFAEFB5936667A9F71557BDBF22A0
-:10F52000EA7D66677BB16FD4EE2334FD7BB37F88C1
-:10F530002FA8CA8BB99FE7450BFD9EC165A3C8974D
-:10F54000E93CBF4C42663807910CB9AF4CAF63DE63
-:10F55000D07AC9E2053B499B2FD499C7431AFAB325
-:10F560003C9286A1EC5E8A866BE029F289CC904FB2
-:10F57000129FB79AC8F281CC904F42DF37F57ADEFE
-:10F58000D9D308DF6FFB914D9C77667EF64AC2E3C4
-:10F590000CDBF03C74ECB62C3C5F33B692F9EF52C6
-:10F5A000FC0619F8F2F9AF743E90BB31BA6EC1BED9
-:10F5B0004AE9EB7383BD65A6F590A7D279DEB98AD7
-:10F5C000F478DE59E43389F86E46FF7512E89FCE71
-:10F5D0003C93FAAE73D0F0DDB6451EF40F77E63DEE
-:10F5E0007D9FE03CCB859C31A9E997E463ED92A631
-:10F5F00019D0CE4893033B318EB7B1C38CFE8AAC91
-:10F600007CE4ABA69121BC3F37A5A815FDAF2B53D9
-:10F610007DBBB24674F18F808FAC67F3BF0CE7BC43
-:10F62000A4AEEF5E9EFFB71CB0A7CADB8D8C0F3572
-:10F63000706CECBC6F857E873E0F6531FA7B35F6CA
-:10F64000AD781E12FCCEE5B0F87E6FF314FCF86DB9
-:10F6500076BB96BF82E59C3EEF99432C5F49CD5F18
-:10F660008797570E3F4D65C991E57E7C5E364B61AD
-:10F670001DE4159963334002FE38BBFE7B700FC753
-:10F68000E5C4580EDCE3F178CE6DB7C23D1D979D01
-:10F69000B1F7A0FC4CF643ACDC2FB605EEF568CF15
-:10F6A0004E6465F85606216F6D926E0D5AF11EADCF
-:10F6B000551DA09F4A34F9299AFB07208F12EF4B62
-:10F6C000B0327AA6F33C5652C1ED77882CD17293B2
-:10F6D000BBD80BF90756E2D9DB01F55946764F0145
-:10F6E0006179534DFDF2589E03E77792C5FDCF2413
-:10F6F0001A04FE6DCAB363FF4E79BDD7C8E34EEC62
-:10F70000FB279E63E7CB447E2E21B66CB07BAC1EFC
-:10F71000A22A8BFB3B8862CB86F3FA4DC2AFC7CBE4
-:10F72000EF5A027FCF8AB38B4E8CBBBF087FFFE3BB
-:10F73000F907FBC27C6F34A8EF4F16CF65394CFE3A
-:10F740005EE6F70CB659024A362D9F4C98311EAE34
-:10F750006E9D965A66B0A39DB65307F2C8C9F9C20A
-:10F760003E95C167AFF04BF0BB1BE29E3F67404147
-:10F770007F0009B4E9407F3A4FFB310FB0C614CB8C
-:10F7800051F2C1AB1FB065431CB0EAFDFB300E98CF
-:10F7900071E23DC8DB38A16F1D9B04FA228FDF03A5
-:10F7A00041377E415A3E9A998BFBBECE7B41FB4945
-:10F7B000281F264E65E7562790B082FE171B3B4751
-:10F7C00035BE24CFDB44BF3791E77D8C3FE94F0244
-:10F7D0003FC0F83BA20A8BB7C494F83C0BF1242E2F
-:10F7E000BD277E1DDCE4892B13B84F585DBEC5AB29
-:10F7F0002EDF3AF2CBFEF1E564E21B04F37C518A82
-:10F80000E239E4E0286263F362F9843FE3FBB64146
-:10F810002E62CA857C478714847DC1A01732308E42
-:10F82000F2C24882E5B41DA66DA6F8F93F26B338AA
-:10F830002DF7738BDF0D823AD0ABCFBF9586F84A98
-:10F84000B3CA284FC1030EFC569A69B2807CD771A7
-:10F85000392FCE6D8F4B32E17DAF4D8BD8EF0D68D8
-:10F86000EFBB6CD2DB0E011D9B3EA273A0DFD99EC5
-:10F870006888C849402F420C8E2E792CF807C6BBE9
-:10F880001EF87E04FB5D27CAE57DE3EF1B6F723235
-:10F89000589B7EA4F0F81CFB7D89C2CEDF9BA0CBD9
-:10F8A0008EB6079B92E03A61F1B16C314FA2F8A09D
-:10F8B000BD9B88323B9F95C6CBE29E4D42CA14BC8D
-:10F8C000674712ED1AB1FC246F27B5BFFA57E08FD6
-:10F8D000BE49743EF4D994CDE4C453F289F5C827E7
-:10F8E000D68007F8C49BD0F379A1BA6CB66EC62552
-:10F8F0008D7441DE4093DBEB02BB4AE0A7F33D1F72
-:10F9000057D48BEF79537B1EB7898F1BE6E78DB5F4
-:10F91000F53FCA66765BE7F87A3AAEF51BBEEB5464
-:10F920007FB7ABBEB77EECBD688F3F07550AEB8C47
-:10F93000E16D02CF732585EAFC1432D26B62F25E70
-:10F940009D8F72A3B4CC0DEBF326536D7B94F67FA1
-:10F9500095F3C98D72E0338837BC3AA3E008ACCF89
-:10F960004AB8D09E8E733389AC0266B95C16F889AA
-:10F97000BD0FCA8B75208FEA7481FE29B47C51DFDC
-:10F98000DA77511EAEAF27B34774874FF061279CDB
-:10F9900094FF80EE82FFB4700B3E20DF0B6342DFEA
-:10F9A0006612C1A78BB03C6AAABF58BEB427BB6B16
-:10F9B0005E9439C79B1AFA827E7FB53188F2E7469A
-:10F9C000FBE39837B63337B00BD6FDB4A11FE33D48
-:10F9D00039C45585F6168577F7FF24BC745DB9E107
-:10F9E000BDB00385BDD72D7FF823832A7F58C0A7DC
-:10F9F0005DC7028E7AC2EE3F1ADBBE15EDBBFAA9D7
-:10FA0000562F9CF3A887BCD8128C7F619EF101BE53
-:10FA10002F0B4A2CDFB79BBDD87B9E31BB0FA0D6E6
-:10FA2000C6EEC111F729DD9B2FEEC9617053F9C5F0
-:10FA3000EFC9C1725B9507F77F9D76E31C6687DE91
-:10FA4000506069867B07BBDF97C3FC7BE405A38717
-:10FA5000DB89A8BFDB12D9772E9A595E7B9C1C27C5
-:10FA6000525AD73D5EEBF4CC1EBC949DC7E278B2EF
-:10FA7000B714E8B111E256BAEE7EC8CF9C818F81EF
-:10FA80004FE614F972E0273D6619989F91F2D5A6CA
-:10FA90000E02E9710DDBE17ECB9B48C39B721FE434
-:10FAA000AB2F807FA60DFA98DD7BD9C55757185F1D
-:10FAB0000551087EDB3A7D2D3520E58CC03CEF7783
-:10FAC000EA4A20CE6844FC8BFC43EDFA8D83E7B410
-:10FAD0009EC1E3807B75293CE61C677778AE86BFC4
-:10FAE000E3F9289D303EEE8DCF21CF3F7158179F0F
-:10FAF0002793800BE0EFE4F755DE165D9F1EE0D6FE
-:10FB00005991EEB74F67F198FA0466A7425CC69D1B
-:10FB100006FE27F6FDDB5733FEB8DD6C447E99D434
-:10FB20005E8BF11752C1E2295EFA3F80671AF18DB0
-:10FB3000839FE698629B84E736A74E54C75BA699DD
-:10FB40006EC4F8CE6D84F9D36E9FAA57FDEEA0C0A7
-:10FB5000C334B2F663C8E798A6F9BD412D5EB4F18F
-:10FB60001A818FA691DFBCEEAFCD4974609CD8435B
-:10FB7000FA7FC7B84E790ECB9FBBAAB8CE117D0CC9
-:10FB8000CFEBBFE29CB769115D17FDFFB308EFE94A
-:10FB90001E97367FFB63B4FCD38D03B1FC4ADA5D5C
-:10FBA0004B4E40FD96022C57C81FCFC07BD34BA7AE
-:10FBB0004F80FBCD8F98D9382E4BA00D7EAFC2352C
-:10FBC000247F186CC92A0C316C77F3D0DAE19007E6
-:10FBD000536161E5E3C5FF6B1896F37979D88B0320
-:10FBE000A17C44FA78464F71A1418552047E97AAC0
-:10FBF0002285B59F386C6706F8092ACA597990B7EB
-:10FC00006C751FA8973F99D1933E6EE0F6B1B0B7DF
-:10FC1000FC7CBDBFE07BBF19CE87F9AD9217CE0546
-:10FC2000F847BECFEEC732B13C02BFAF5881FB13DD
-:10FC3000CB7DCCBF37D6DAE806F9F7BD80A104FC4E
-:10FC4000B8366B5E33FCBE40F2C8B21140EFB1D49F
-:10FC50000C03FD47D7D5125C57D77C9C93847688DC
-:10FC60007A5D09BE9D24D653857ADD5079F04346EE
-:10FC700047F57AA0E32E87F7D3AE55EBA54EF9AE44
-:10FC800059B75A7EEC55EF13B51CECD44FABC2C834
-:10FC90009759849DFFD90C7CCAD66F2BC061903BCD
-:10FCA0003CF03E57F20EC4C48A5EEC07011F983D3B
-:10FCB000645877B8E04F11F62283C0664B83EFB2E9
-:10FCC0007ADACF073F2226E0A2DF0F217E56317875
-:10FCD000364B0DFC7729985D2EF6BD7562BEFBD4C0
-:10FCE000F32DB5B073EC2E42E50EFAEE8B077E13C2
-:10FCF000DCF55CCF4E35F91F36D239DC669F857452
-:10FD0000BE83049F03FBA6C312F825D05B27070F11
-:10FD10004625F85D091FC693291D7F9513672F0897
-:10FD2000B8B4F8A8EB45AE6AE1D6E2A18B3E1D68F7
-:10FD30009FB9F9EFCF75CE4B339F267EFF7CACD8B1
-:10FD4000A8CA133D5EC5F260055CC72552887A5289
-:10FD5000B2601CB5D3EFA4956FBD9C6713FA59C070
-:10FD6000793F3F4FF585CCE4DEFDBA08C2995BD9F7
-:10FD700061063C7E92C3FC2E02FEA691416C679008
-:10FD8000A51EE3C49FE4C8C25FA6A2B7B8D74CC4FF
-:10FD9000B9045E1D064F16E67B6AF039D364EC3970
-:10FDA000AEAA8DBFF6D24EA2F8CB4CE98E67112FCA
-:10FDB000BB45EB87BB89F9A76EE17EB8B1950CFF17
-:10FDC000294B1371DF965272422183BBEE5D16F40C
-:10FDD00078C711F82A07E316D111E027787DC44FC0
-:10FDE000314E24EE37D4E2C792DB337E7A5B0FBD0F
-:10FDF000C1FFAEC56FCDA5E35C943AF01EB4BFBBA6
-:10FE00006C7CDC401EAC17BB2DAF0CFC0B54AE7EE3
-:10FE1000FD356C36A10AE8E70C38729DB03EFCE374
-:10FE200020F73AA532A067FE7982FEE1C57C9F38B3
-:10FE30008EEBF74F76B1F3F315BE014F8E01FBF356
-:10FE4000989E843C90C7CDF0F3C9261DEAF579AFA2
-:10FE50000D77817DFE01E7B7FEEB65D5EFD30D0889
-:10FE60005954F76C0CDA91A22A0F0E67A8DA0FDD4D
-:10FE700097AFAA2F8E0C54D50F3F364C551ED1315B
-:10FE80005AD5FE9A93E5AAF2A8E80455FB6BCF4E2B
-:10FE90005695AF8BDDA9BE2724E8EB284C83FBF9F0
-:10FEA000193E6EB83253D5FE7CD2F863B0EE66AF21
-:10FEB0006579DB6564A1AAFF425D0DE64393566652
-:10FEC000C734D0FF213D75772B982746EDF754C0F6
-:10FED000DB7AB59D53DDFED82A90B5DDEEA7D0D8EC
-:10FEE000335AFBA5BFA30AAE7726B7E6F2BC936BE5
-:10FEF000C835FCF74AB474C5F3FE9FBCA9C37DC4E2
-:10FF0000E2D7987DBF7837CB872B20FD92F11CD8A4
-:10FF1000311D094970EF41C3BA3152971DA3C58BFA
-:10FF2000D1A5A6B3D9A3A67342A19ACE895E359D69
-:10FF30009347AAE96CF7A9E99C5AA9A6B3D3AFA63F
-:10FF400073FA34359DDD01359D33ABD574CE6E50DB
-:10FF5000D33977A99AAE79C105AA7A2137FBB42C97
-:10FF600056BD6F92C2A5545292D9FE6ABCEFA15FF2
-:10FF7000EB0F7BE40F41FF20FD1F5BCF0D985F3F30
-:10FF800097D21FF2EBFF42D61E855094960FEAF6E9
-:10FF90003D8671B5EFCA078F6AE97F95F629D58747
-:10FFA0004F803CA176CC7A900FD3FAF37D87BF6760
-:10FFB0003B46C8AD78BB217E5FDD9B3CEBA627F9B5
-:10FFC0003EBB573DA9D967BF05D94D688FAF45BF27
-:10FFD000D674CED79FC2AB51E0577D16F5FF5B14A8
-:10FFE000909114AEB7006EFA9DB72C83D00F7217A4
-:10FFF00089E8F19E6BC8DCD4E17D9998875945ED7D
-:020000022000DC
-:100000007278CEE2F6C11CEE27F9CA183890CBFC04
-:1000100023B969F0DDAC0E76EEEB78EA55DD0BF135
-:100020007BF827F8DD73FD87619C0A9367C913F499
-:10003000D561EE7F221359FE2751FC83E3EF61EC7B
-:100040001A87C54D5F940201DC67BB4D5ED8670F10
-:10005000CA242637E83757281FE25427347A652008
-:10006000E791DD19E1C576C4572805E304DFF1BB4C
-:100070007FCAF59D047E10EDBF6DBE06437811F377
-:1000800027B0DF4B7993D3E5A9DB8D11D897093ED3
-:100090003A9930E3A8D383FEF033C86F77DCB40A13
-:1000A000CAD2E154CF620ADFE5AA28EEEF29FECFDB
-:1000B00001DE6A4C14FF748A17B303FD938119FCA7
-:1000C000A9DC49E91FDCD3792401CF58897DFF5D84
-:1000D0004BE05318E7B0DC91E3057C281D786E8F68
-:1000E00058D1B821170D3DFB03051ECA13B2EFC648
-:1000F0007B788D462FEC2FCA2546D7D3A9F7CC8025
-:10010000D8E21CD99F16D1A9E0963C00B7AD2AD7FA
-:100110004DF9F1FF00AA42FBD90080000000000069
-:100120001F8B080000000000000BE57D0B7854D504
-:10013000B5F03E7366CE4C924932492024848499AE
-:10014000843C20214C82202AE2F0088D1A30BC1415
-:1001500030E2E401843C2080DEC6963603E1A5420D
-:100160001B2C2A2ACA8040D102068B801AEC206AF6
-:10017000F16A356DB5A55AB90950E54D0C3E68EBED
-:10018000ADFF5A6BEF9D9973480AF6DEFB7DFDBE0D
-:100190003FDEDECD3EFBBDD6DA6BAFD7DE73DEE2EF
-:1001A000CD8C561963B6DE8CDD00A9D999531CC9D4
-:1001B000D8B7F8774B3065CCC718546954E09FBD69
-:1001C00020F723C5BFCDC5F81FE4F7FB62FC0F4144
-:1001D000DE6ABAF4C114C8770C36B9B740D1C6701C
-:1001E000E83A9FB1F7B11EF4FFB405F2B1F47D35E2
-:1001F0007E4F08E7ED131E33F91BA17DF198971789
-:10020000B2EB187B76BEDDADC258A5CCA931985FA4
-:1002100039F3682C8DB1BF8CFEFBC1362763FD9D81
-:10022000DEBECE618CDD1B674AF980E6E1CD9E041F
-:10023000F36623E3184BBC72FEC67530B6C6C4869F
-:100240003336D9C197301BD705EDA6308F05C79936
-:10025000C6BC161CF77717340F8B82D404E530DF49
-:10026000BB988FBECF607E4AEF6601AA7F0F6BA35B
-:10027000FC6F237293EB617E931ECF4C67D0E662D6
-:1002800069DB702CFF87D5EB76C2B83536EFBDBD84
-:10029000E0FBF964EF677D10EEEB39DCAF36DF4948
-:1002A0000A87DFC5FEC52370DDE36CCEEBF2521981
-:1002B0007BDDC42A9BED5036AE37CD9F991DE99367
-:1002C0000777D7CF32C6A05D6B67542E1B82798F1C
-:1002D0003D11D6FF3D81C2EF79AA8B709D05AA9D85
-:1002E000F502F8B73A55BF15C62C1C5DDA17D705CD
-:1002F0007F913EC0D3448FCA10CFBF5E0A5FA0DE9D
-:10030000AFF3543FD2C4C40DE34F63FBA2D1539665
-:1003100047C3FAC77FD3765D00D2C27E96E36D599C
-:100320007C8C6FE17F5FB28DE36220BD2D618F9980
-:10033000C1FC6F1BA02F2FCA81BC2D989FC8CCC1B8
-:100340007218F710C201E8A7FECF79A3DE0869C7CB
-:1003500058935A0CEB2E7146F6FA3402B283D8A0A9
-:100360006F71DE6A49B4D7DE337CBF6E708F7A035B
-:1003700068F276C553EE24BA706A48FF6566E6698E
-:10038000EEA6DDAE7445D00F60379EB13BC45C3B3A
-:100390008B2E691761BD4F3ABDF3B19F4513FE32F5
-:1003A0000BD7C7CCEC3743016EF3DF03B841F9F14B
-:1003B00006807C2663271B6CCC6365ECD30607E5BF
-:1003C0004F3524507AA6C149E9B9862C2ABFD0E01E
-:1003D000A6FC2167F1F7B1DFB2D59F9BBD398CAD8B
-:1003E0000A9378E4F3582CE87855F2F03FBA61BCF0
-:1003F00055EF5A285FD9DC341EC1B138F9F8B2087C
-:10040000F8BEF839C58DDFAB5B3C9A1DE633FB0DBA
-:10041000EF4A249FB9EFB64D04F0B1DACB0AF3E20C
-:10042000161A50BC02C71BF6E1C97884DF670D239A
-:10043000683EA71B3C341F4F4BFB5B71D0FE6C43E7
-:1004400021E53F72163F8CF53DEC730DEB4FD8D98B
-:100450006E4E82F2028FE2C1FD3DCAC3FC7EC0DF58
-:10046000068BD78B74B321D1E6C6FD3E7AF0E4A7A4
-:10047000EF83713FE9EF7D14E97A5A6C79411C7C76
-:100480009F38A2D48CF5EEFA8631CC4BFABEFABE78
-:10049000E6F0A8157839FF9A42703ABF2FFB8E9B81
-:1004A000A0BFD78EA84C8579755E36D1BC3A8F86B1
-:1004B000FB9912ACB7E82595E87AD160CDCF5C986E
-:1004C000CFEEC372709DD019AC3F4B71B27AA0BF12
-:1004D000B3BBBE9F807890E39F8D6DFEEA23E47BE3
-:1004E0009F70BEC758F3A74F225FEC97E07E08725B
-:1004F000172C6C3AED5356173119E86BBEC6BC3C4D
-:10050000EFCDC6FCD970766F31E487EF4E1A83FBCE
-:1005100008C7736606F95AC6EEC7537FE80C8EB754
-:10052000A379F6474F42FEBCDFE4B34443CA9A2F97
-:10053000BC827C79ABDDBD8DE13CCDE138CF872D30
-:100540007C5EBE6DE1EE6D4EECCF4F7C00CA352C6B
-:10055000AF79F189BEB88E5701062320FFEABA08A9
-:10056000E277AF5ADCC7EAB1DDD3BCBF9FFFE481BD
-:10057000E307305D5B9BFF00A4BF73C612BC2B1E5C
-:10058000993708DB6727017A803FFE62BF1208CBEC
-:10059000656CF0FA43CB1261BC211BDB4D7D21CD94
-:1005A000DBAA34629A9D5C784485FE8F3A9D348F35
-:1005B000A13B5D6A126ED7BEFE8F6E4923C02988AB
-:1005C000BF41027F39EB3F1FD317D25D7D9B17C51B
-:1005D00040F920A5F9CC5217D2F91FF2BD04BF266D
-:1005E000EAE7A59629BFBF9BE13A7C89369C77A9AB
-:1005F000E6A6F309966B81FCF9BD699B1F8235EE77
-:1006000033F936D3F95566736F43BC17FB9E407CB4
-:10061000D7427D1FE46BF37C51374279ED2703DC31
-:1006200040512CF999EF15223CE6EF7D747C5FA8D0
-:10063000777E24730309B0CA972E8DC7762C993123
-:100640006409E7F736C6CF84760FE78C1986F45530
-:10065000AC36D3386C011FE77171EEB136004EBC79
-:100660002055A8F7307CC6EFB12D31879258103F46
-:100670000B5A96BACCD0FE3AAFCDADE2BE71F912AC
-:10068000EBECC17314CEBFBFE17E4BD444BF8E29C7
-:1006900029C5DFE1FCD3C47926FB7B5C63BE30E86F
-:1006A0002719BE2B783E6BFCDCDE067CA53E3F782E
-:1006B0006EC3B8E1AE61D4DE837C38090EE93C98A4
-:1006C00067D2E3563A07AE75FC8B16FB6A05E876EF
-:1006D0004138E76363C4F93B3DAEF1601BACF760A2
-:1006E000B837DE05F5668B739F99DD4EE4EF5BC38B
-:1006F0003D7D70FC1A5B470AAE01CED524CCCF57A6
-:10070000BDFDE3D3E85CD5C933579B476BB8C785BC
-:10071000EDAFB5BE91DF2EFED2C4F2800E163F6A59
-:10072000257ED1887C19D6D51839DC867C83BD61BD
-:10073000AA790BCED99B79CBAEFE1647E6135F693B
-:1007400064AC5B78BD06FBDF0BFC2600E78417F882
-:10075000C0A8CB1D2AA7F7D6C3D1D7219F659E4835
-:10076000A09F5B2E9B9837E41C34F603F8F2201C04
-:1007700047B308E60D39573D2C46C37DCBECB1FF9E
-:10078000DABAC5FC470AFC8DEC3C1AC1EC080FF83C
-:100790006EEF795D07C5BA7E85EB82747B7AF16472
-:1007A00084FFCD5F38CCB8BE9BCD935250AE8179DB
-:1007B0004FC7798FFAC2A49FF737E1BAFCB5CEFFD5
-:1007C0007E85F94CB81F3FD7FCB81F5BF078043822
-:1007D000B6CCCBF1E3BEDFA7F1BC2F4A23B9B625D7
-:1007E00092F9908FB44C8AF7FB5CC80F19977B7B0A
-:1007F000335E1E26DACF88A7F67DAD0052E4077778
-:10080000878BFEEBDE198CE54B93888F345AFCAB5B
-:1008100053B1FF1FA9C4878F0ABEBD3E2670B70A19
-:10082000FDAEFF3C9EE13847592069018E53194EB9
-:100830007CF72693E9DE4976ACE7498C0578EFFB37
-:10084000874AE7C4FA3CC8DB896F4F6F86EFEB2716
-:100850007912C3B19F49F1269A8FCAEAE8BB8BB7D8
-:10086000FBC8C2EBCD14F8FA93C00FEC6BDAF7DEDD
-:10087000891166A4DB4DAEB247683F304FA202F348
-:100880007DB2229D21DF9C5975AB8BE8A5E971E211
-:100890005FD3050E647FD8C0361CE566FE3763F66D
-:1008A000B630C4E7B4CAB0763859D9D1CA65914ECA
-:1008B000683FCDAB06ACC04FD9D4024F975C978A46
-:1008C000E37A68DCDAE681692743E8B9CC0A7C027E
-:1008D000FA7F21CCFB04CDEB401E951F00A1E65B07
-:1008E000D84FC72BD277E3BE621571427F0994239C
-:1008F0001E5EEBB0919CDA133D3422FC87083A452A
-:10090000BC2CE17807798DF28DD307913EB3C9C233
-:10091000E9C6B7278CF05A38D94678EE9C1EBED966
-:100920000AE5F70ABED5383DDCA340BDC697AC7ECC
-:10093000938BF424AAE73B1849FDD6683C5FF36229
-:100940003AD1D33ECDFFDC762C7F2D8CE8A1268AD0
-:100950008F5BF34A92A0378F6B058E7BD04A745021
-:1009600013EE8CA6F2FF8C233A1967F3BE82F000D7
-:10097000BAAB4339A2460B64C4007C8F09BA3A066D
-:100980006D107FBEBA489A376D79C87B1B93B7202C
-:100990003EBD1A2F673F50A9FC98838F7F6C0D1FB7
-:1009A000BFE4A7D5EF32C0DBB1E2F189B3611EC766
-:1009B000EA22486EFC73BD1AD0A250EFE9782C03EE
-:1009C000EA5D587262F806987FDBB28F53903E4A18
-:1009D00096D51661BB92AA2513F1DCEC695F96D41B
-:1009E000C0E60FD9C7275C9EDFE17ABE75793FC4A8
-:1009F0007DBF20A76D0ECACF17B4D66750FF888D74
-:100A0000F31EC5EF175FFE6C3B97AB3B32F03C9893
-:100A10006FE6F421CFD50582FE56A57A8FD1391124
-:100A20001E9885E747444E2BE7774BAE8DCF9F69E5
-:100A3000D9B64F8171AAC35BE653AAFA73B19FB3CB
-:100A40004A204A4923F879713F9D7304A210EE5E53
-:100A50001397E7AA77E8D7857F66985735FE03DABC
-:100A60005537AB9E30C435F36B38FF6AA605EBBB38
-:100A70008278827E084FCCFEE7593F04F8573D3715
-:100A8000301FF587EA98033FB989EA413BB94FD453
-:100A90002BF3723D57CE87AFEF9CA0FF7392FEA75A
-:100AA0006B529FA7F12FBCDC87C63F3BC99F81F0EB
-:100AB000BFA0887ACF59793DA00633CEF3054E4FBB
-:100AC0008F597CA670B20B30A2E7EAB8E6E10817AE
-:100AD000C987600E3E13D43FBB3B89EA4BBEC58A33
-:100AE00019C376D5BB13B770F94CE8B33851A85F7A
-:100AF000F50BDE3FE6711F9E793E498CC7E5692301
-:100B0000FE8CEB4D4E35D17A1F93FC3B52EE737742
-:100B1000C224807FE6064D57FF42A476AF07FA1D38
-:100B2000E8D77F97FD0F4C55483EEB6FC05B5FB534
-:100B3000E39015F7D3B38CF6AB715EEE54AE373E4F
-:100B4000FF7C179E548E371003257D38B91C6E41EB
-:100B500038FFA90B1FF725015FAD4618A406E1B3C6
-:100B60002FCF9B84FCFF02E6F15C88817C0ECA419A
-:100B70001CDE322FE16CA4B3657F9A93D406EDEFAF
-:100B800046F810BF77F7417AEC925F2CA08FE4A073
-:100B90003E5A39F4643AEAA97503E128E85ACF9C31
-:100BA0000D7936DC4F7337E6D9CA42F0D0B863E826
-:100BB0001127C0F9DC0EB31BD972A3D9FF1394A778
-:100BC0001B77A8CD3E46E53684EF39FBEBEF61BDE0
-:100BD000391B63F2515E96EDE76EB87F604508DC25
-:100BE000B377E8F130B8599F1F72409F9F8DBC6169
-:100BF000D8776F9717D0E7871ED1E75907600BF0BA
-:100C0000A0DA389EF68F701F71029EFAFB55377E70
-:100C1000EA6F9F3C6502CA171B55773A94F75F52FB
-:100C20007CFB60C89FDA38DB8D68AE547DF37F08AB
-:100C300038ACFC78FC113C0FCFB2E63F4C003CCC0A
-:100C40006959A7999DB86E3DDDEE33097A7D9EDB2B
-:100C5000D9E6F9F5E557EEEBA5028F2C2B949E8C87
-:100C6000788771EFF4C0846AEA170F3D094766651B
-:100C700011103AC0EC86E6751ACA6D571FC7C7E552
-:100C800041BBC789F0281DC1CB6EAC1FCB4E0C8574
-:100C90007FACF9ED789C77E9C30AC90DA5BFCC7C80
-:100CA00003CF81F63D336EA3F4CE425ABFB4E7CDF5
-:100CB0006D51029190778C701E688376B3FD8A1B0C
-:100CC000E75DB6DC1AE467F0BF8A358679AC0F2998
-:100CD00087F9CF3D70E8AF0AF45FB951DF6E1EF0BF
-:100CE00059E45F555BBFB5867E977AE38D2D9B55A2
-:100CF0005CF76C397FDF2886EBBA915765BD847C41
-:100D0000731233706E4CEB5DBC2315DBADE7ED80E9
-:100D10005D96E27A6BED9A13D75B6B63810898C797
-:100D20009148CDE380EF973644921D6D8E15E4C94E
-:100D30007C4A59583EB6734763BB4FDFE7F6B4DAD7
-:100D4000388EEFDA4D0AE951B568FCC4FCB33C3F7C
-:100D50008F05681D48279ED0F5F9F579D6C4F5AF03
-:100D60001A73E010C2A38AB571FD09F0E891F0038F
-:100D700078D5C03A8FC6A2BC6568CFDC5E1C77818F
-:100D80009DCB4F0B0E7C6B0D2D977AA0D453A57D78
-:100D900077534671388EB342F13C618379AE10F2DD
-:100DA000B56F5D18D1EFCCCDFCBC01393603E1B293
-:100DB0007E5DA21BE58C99209787E1BE99174EF5C1
-:100DC00040DE25BB4C07C8D55B5C58BF3980E7C601
-:100DD000FA475D244783FC4B70E9581BE6DFA2A06D
-:100DE0001CCCE598F5EB32490E7F559E536BB9DC70
-:100DF000D58D5C4CE5AC0F97E33FC2A584C8C15FBD
-:100E0000F4F67E9ADA3BB8AE8A659E443C772A2691
-:100E10006B26B457B1CAB86B921FB60939B203D664
-:100E20008FEB38A914BF650A9147BF16E7C8F031A8
-:100E30009EEDA29E1BEB5598263D740B8EF798C92C
-:100E400089E375C1DBE3C9C0799C5C17968F743662
-:100E50007C0CB7171DCBE3FC3DE23AE6F1E3799A4F
-:100E6000C6FB6569265D9A100EF407FD9C2CE0F622
-:100E7000EAC8EB8AC94E076735F179E33AECA29FDD
-:100E80000AADF83F6FEE663E123E6C1C97174E2E71
-:100E900054B6F079017E213FFC9130B2EF9D14E70A
-:100EA0008F8433D0CD30B2D30B7EB54ED0CB3A0B3E
-:100EB000A703DF3CAE3F05E985113DAC177AD64C60
-:100EC000815FB696CBB5402F1CCE6B1305BD30F6B7
-:100ED00037A487022797B3AF515F02BC0F48EB7D61
-:100EE000A5DE24F1CDCCFE61FFCC2F52BB7FD73ED7
-:100EF0001F9C9F552F3C1AC5A0DE697353BC1BDA9B
-:100F0000D76C5B11E581F494D917E580F14FFBD5DF
-:100F1000427F37F02E4D9376658F5D01FE331FFFC4
-:100F2000E94479E7E189B8BEAFB6591CC81216EC9E
-:100F3000B092FE347FEF3C92B321DFCEF3AB3E574D
-:100F4000317F406F3FAFFAF9A3F14E82B72FC994BA
-:100F500080692089413A7FABC51D40BBF407AA1BBD
-:100F60008601B9B96325CECFD81EE77119F0BDA0AF
-:100F7000592DD5A2AF2C5F20F8CB82BD0F7F8E7686
-:100F8000BD05067B7DA5F05B18EDF593D2227B7D38
-:100F90009A0DFFB89E5D8F7210C0C51DC07D0BF30A
-:100FA000492732E1F6DEC6E71ECF6D477961EB3B9C
-:100FB000514A4ED05E2FFD199DCDE59B5E71F6BC6A
-:100FC0001F2F08BB6D105F9C6F390F28C80340416D
-:100FD000E7698D25107513C0A366B385F84CCDAEB7
-:100FE00067B73F8974F6272B9DE7D5BBDEFCC38D21
-:100FF00028EFEEB1F42AE2CBB02BF1413C2D707218
-:101000003B99C44BD52FDFD49C83F9F725B141FC24
-:1010100054EF39A4B1C157C2716CF321ADCDDE0DCF
-:101020009E9ADBC7939DE8B9AF35DC07A75F53589D
-:101030001FD795ED2B37BF1985F218C209CF258927
-:10104000AF2EFC19EA43FF135FB98EEA3950AFE8BF
-:10105000097FF97876A05EBE3F92C5C0F8951F590A
-:10106000FD4588D7DD8BA3701D9F99EB389D3FBD53
-:10107000221EE5BA4A8B2FDE4129FF5EF9CCFD44E2
-:101080007F7395BA78470ED177A28964065F22AE46
-:101090006FF6C669B4BE39CC4BF457F9B45AEC8735
-:1010A000F44B332BDCD3CD3EF958F0A5CFB600522C
-:1010B000617D9FA1DD06F9C6EF54A1E72EA4F3FBE5
-:1010C0007EB156C61651FE4B21B7ED4E33497B9685
-:1010D0002D545F5CB075552BE2E74CB2A70FCE13D1
-:1010E000E0E013F052BE857ED5DF16F4E1F8614EE4
-:1010F000F370D10ECED1B1F81DEBB75A3C68F70EA4
-:101100006927F4393EFE7D627C987738EAAB9FC54B
-:1011100073B9DDB8BEB001920FB056164A5F3DED0F
-:10112000FBAD0F125D7DF101E72BF3FD930AA9BC26
-:10113000D512E883E5FE435315E20B5616E86E5FC1
-:101140006FB5887DAD2F87799A9550F8BEC6E5D0EA
-:101150003920770542F671906EB4E0775AF7236232
-:101160001D6DE44F937EB8B9821F18D76DE40F1F31
-:101170001AF8836CCF3676EF070AF2051F8D5B03F2
-:10118000E709CA19357FB2D2B951B3CB528CF039C5
-:10119000BBF3F01F66A21EDA2CF7B19EDF1AF771BF
-:1011A000E58BC3BADDC767D7E475BF8FE17BB7FBBB
-:1011B000788D42FCED7FCA6FE1A423BB414FFB75E4
-:1011C0006E0FFCF6DB34E11715F0FC92E544DF848A
-:1011D000858ED2FE841F035C253C8DFCF3F1342701
-:1011E000C1D7C83FE1EF03160247093F499F8C79F9
-:1011F000699C2E3A96742AE9B88B4E8DEBD5C3D1F3
-:10120000587E18F913CCA7F8650BB79FB528246F43
-:1012100043BBB792AEA37DEAA1E38F35BD95D42B36
-:1012200034EF37E49B0DF53D867CB1A1BED790AF7E
-:10123000D3D5AF397058E3FA414057CF5A7F3BE9D5
-:101240001957CA117EEEF7D9FBB9E643BAE8D7A120
-:10125000215FB42C63BE4894770FAA24EF5E7476A6
-:1012600044A15CB2228CCB6D171D221FC3F31DBDA0
-:10127000B595C817E5F78E306E27B958DC111513F0
-:10128000A2A7B7B7A851688F6DF3B3C2EEEC28647C
-:101290001905B8B6B19ECAB9FC56A0DA53EAD11EF8
-:1012A000DAA4BA814C58C5D2BBA228EEA125ED8E96
-:1012B000E9F07DF6DB2A850F5C0CE77605E6F3980E
-:1012C00031EEA09CA3909D62BEC746C2BACA5B78AD
-:1012D000FC41C51A3D7EE7D8A746079CC877F47144
-:1012E000027351AF4B437D4FFFBD8AAD217AAB32C4
-:1012F000EC0BAFB0D31AF745D900B12FF2589EB01E
-:10130000C7909F6391E0D7056ACE1DD301FE178F6A
-:10131000A8CC0AF9CE1695ADC4F5EE54C8DF830EFD
-:1013200001DC6FF3615FE27C247CCEE1BEC9EC5945
-:101330002E39F7D227C37F8874B2EFE3DCA7203DB4
-:10134000B7EF4F19AF627EFF1F533E6657D61FFBA4
-:10135000DA5F67211FBEF89A95217D5F7CEDD72962
-:101360006817BCF88A95F4E58BCBACDCDEFC5AA49C
-:101370001FFD911793B99CDB78F0EBDC363A779739
-:1013800013BED60ED0B8DCD4F2F76368AFEE6C8132
-:1013900055A13CF15A04ED9F05AF84913FFCE2C199
-:1013A000AF8787C64DFC4FD723FDDD1723D9F41730
-:1013B000916E855CBFE0D51B9E457F6EEDDE435A86
-:1013C00039948FFDD57FE722FFBCF82297932E58E2
-:1013D000DA9E415BE386AD373C624944FB1C74D620
-:1013E00017D0B5ED81C9B84FAE840B87C3458003D4
-:1013F000AE0BE052897CBF2778BCF06F0B8FCF67B4
-:10140000717E763D43FF6F102E0AF723B444FA6DC8
-:101410000AAD9F7F7FEDEB5CE437575BEF6F70BDEC
-:10142000BDFFFF59EFD97F5BFC727A5F3CC049F387
-:1014300033D2FD9574BDFF3F28BF3BD24DF3BDC6EF
-:10144000FD1E91FEEFBAFEFF1B7C0FFCB75DEFD5D2
-:10145000F0FDB6C077A403FD8A170FFE770AFB0ED6
-:10146000EB2E4CFF77DDD7FF7CDD525E1FA3BA8FDA
-:10147000E441FD7758F3076E17491FDDCA1DF707D2
-:10148000E3EF483F1ACBF8393DD6564DF2E6D87E09
-:101490006B492E6E64F9E487F0F553C91F43C117F9
-:1014A00000875F27E4F9C99F640EF45B0CF93149AA
-:1014B000B5149F65D41BC7864F284479F4F0529821
-:1014C00017F47338D2E4405FF1B87E6AC09A4B6972
-:1014D0003BA66FA5DC7E04E5967176BDFE74BB412C
-:1014E0001FBAD5A92F2F642FF642FF59618E85F9B7
-:1014F000613EE3B17E88DE3825DD41F0BA95352DB9
-:1015000077D8BF3B9CB6A5733DF94A38FC73B85DEC
-:101510000127A1279B457D23DCCCF6875AB19D99F5
-:1015200081DECBD74BFAB2D47BAF064F26F469B33A
-:10153000185AC2D7DC8FFB4943FA25B848B87F5701
-:10154000784B3C19E12EE12BE166C4433D1AA37AA6
-:1015500007E1DFCF9C67C67D77B390E3C7996378D7
-:10156000BE5FAB5A4CFBD1CFE9FC0BB719E593D169
-:10157000F6188AD764CEE418D46751C4FC3609E45F
-:10158000CE1131C315586F9299F9ACA06FA20F8D8F
-:10159000ECA80F9AFDCB5C380EB7D7269BB95D1A25
-:1015A00076B72F3C9FEA7B34C897FE6C2EF340FD44
-:1015B000D224E656787D161D4BE1684CC5B82C4800
-:1015C000B15D6934EFB7B40FF32FE3F824BC0CC05E
-:1015D0003495FAF5986279FBA87C6AEF33F1F61E30
-:1015E00033C67BA571FB7AC70A2BE91FA5AB9233E3
-:1015F000907F148DD1DB8D9333B89D59A6AB33F812
-:101600007E574DEE04948BCB960F247D480D2FAE64
-:101610007D09EDFDBB23881E4B57DE336118CE6F6D
-:10162000779C1BA77766E29EE1BCFE8CFB3F84EFB4
-:10163000DE1D61F47D6786F7683AF4774671CE7AED
-:10164000093E944D3BAC25C010DEE649E7D1FE379C
-:10165000D1B7E73DF4334E9CAA52FD898CC73DB209
-:10166000E511E48F9EE0FBDC9C00FD4D006503CBA3
-:10167000DBC31C290B61FEA5C2DE7B52EC17359C37
-:10168000795FB4E3BC923352E1FB04D67D1C706AEF
-:1016900086A83F46D988FEA1FE63B93D5ED6C77EC7
-:1016A000B0DF2C018F8BE9DCEE24F30057AA5FB189
-:1016B000DADA9E867ACF6A4B2013D25959632EE12B
-:1016C0003A8B52D9F80D08F70754B685E6DB514A34
-:1016D00076EEC82C27E2C10B244DF1854D2E27DA7A
-:1016E000BDDA473707D03FD0FE84CBDDE8242C534A
-:1016F0003C8ED4B3DA470706A05DBE238FFB198E5C
-:1017000039DA22513F2CB7DB283E47C6F5CC76F0BC
-:101710007DDEBFB16DEDF5A8773EAABAB7407EF683
-:10172000A3DCEFF217BBCDAFA0BEB69EEF53B6461B
-:101730001FC7C31C6EB2F794378DD650BFACB07BB9
-:10174000345C6776A6372603F7D13700BFE118C7A8
-:10175000C96833943695529C891A05FB0EF789D9CE
-:1017600019857AAF310E688188FB91F917C2BC7D6B
-:1017700033004E65D1CEDD482FC7EBD3C8EE3943D9
-:10178000D05D11C631A27FC2DC9688F379078DB88F
-:10179000307E51AC23C34EF41CC6100EED16470626
-:1017A000D277FB8A3013FAD98A9671BA867D66336E
-:1017B00043FB07CD2C1CFD06A7D279BF254BCDC519
-:1017C0009B21DFCFC6CC91B148577944D79BB3BC9E
-:1017D00017D3A1FF533F6223901ECAD7AC23FF8AC1
-:1017E000A40B666E1D1707E39CDAE6CA47BE29E91B
-:1017F0006873D6983C844B173D4C55880E203D9419
-:1018000046F430793896178D090C589483FA680D90
-:10181000F3E0F99EC0DC282774B20EF23F76DA3589
-:1018200027DAB9243F917C03F0EAB1C507E9603BB0
-:101830009CF7660B633B1A6C943EDFE06066E071D8
-:101840003B1B1228BFBBC149697343167D7FB1C1E1
-:101850004DF9BD0D2328BFAFC143F9030D8594BEDB
-:10186000D2504CDF255F02B8101F927C45F2A37264
-:10187000BBD68EFE48C9978C74330BC03B2A9FDAC7
-:1018800013DF93FC0ED761CA0FF22389DF54A5D86A
-:1018900097E0423ED63603F15FA09EDBB51FF5F21E
-:1018A0004ABB9BF474C6F95E27D02BC2254563075B
-:1018B000D0EEDAB8D0D3BECA1584FFDD950A3387DF
-:1018C000D0D53D7561CC1C726EDC5B1FA3CB97D469
-:1018D000FFFECD3ED0FF1DBDBC55487FC77EFCE955
-:1018E000D37F84EF9B7E7C261DF10DF3D8F6388ED6
-:1018F000BB24BC6B1EB1985F6E217F547F6907814A
-:101900003FC44B19E3FB6DD38FFF46FBBBBDDEEA43
-:101910004479F823C413C0F5CF024F65F556825FB2
-:10192000E98A13BBF6E33E5FA2119F2B5B2EF6E123
-:101930006A8067887FF77822237B0448D314AF7EC0
-:10194000FC475A2002FA3FAEF0FDAB805050827146
-:101950007FAB7F7D14F7BF527F84FCE75E9B3D40E9
-:101960007280CF722EB43FA5FE2DAAC7DAFAC5A0A9
-:10197000BD84CEB15BD0EFE8D19CB06EA469C45BEE
-:1019800059D6EB2C11FD264D8A03B74C85F85EB174
-:101990005AE1FE49B33B612AC87D8F64A884C7F72A
-:1019A000D2CDB42F733298885F68A2F349D26BC549
-:1019B0001A6887FBA2294F9B13C287CBC4F7F22C6E
-:1019C00013A5F2FB16D16FDFD579D3519EE88BE5D5
-:1019D0003998E64F47F8F6B58F372B21F8DF986135
-:1019E00016F3E0E3E7E06683FF7B282B559B9D839E
-:1019F000F8E1E7971CA72C2B7F25C67196AD198DB2
-:101A0000DC97355ADC09BDA0DEB6AE7E1C5C5EB04C
-:101A1000F178E59A1ECE0F693F3B85FFBC81D64D1C
-:101A200076DDAADDBFD88D71FC551F5B09BF55431C
-:101A300044FC548E7FF8143234EAEDD5E37EF1494C
-:101A400014F91FF6F2B84A48B93D754925B7BFBA2F
-:101A5000615F75E3FF7963F7C751DDDAA9F7AAD7AC
-:101A600064A75EA07C1385F2835C4FC1C12FE3693C
-:101A70001ECA65F2FF2C38B822BEBB7B37467B7589
-:101A8000973D5BD8ED8CE5467BDDD10CBD1D1B047D
-:101A900044BAC725ED754CCD8946FBFE97E29E47BB
-:101AA0004F7A8DB46F2FD8009DC4C1FE343BA3D1B3
-:101AB0005F75B10779DA99C9CFFBF3C21E7E71A7B2
-:101AC0004A7ACEC59D91B49FE6EFFCD95BE83F9C76
-:101AD000BF55A169D4B256821BC093D942CF318C75
-:101AE000378BBB72DE9DFEF4683C47AA7F11598795
-:101AF0007436AF59F16C83F974DA9CD1BD43E6F3C7
-:101B00008DA0B36A6BF37082B39C3FF2C5DEC17ADD
-:101B1000F35A7E46F663A87781E4A0172218BFFF28
-:101B2000D1F11ECEF3ECC6A16EF4FBCD6BDE339F7C
-:101B3000E4889D110E1481CE883861D98F2D938F42
-:101B400067CBE472CB59E10F3ABB5B257E86F3C4C9
-:101B5000FD7546D1C7E345897651026E2FE2FEEE50
-:101B60001DAC3FAFB93D6A00D4FFECC0EF294DC8B2
-:101B7000E47C609EBD3517CFDFCFF646903FEBB3D8
-:101B8000BD4F8D7F15C63BDF3CBA17EE07D97F46A8
-:101B9000A685EA9FDFA81622BC989FC7BDD4227CE9
-:101BA0008786CE336EB3CF15BAEF78DCCFD9BDBF01
-:101BB0008C32E504F1596BF3DA125371FF9416235A
-:101BC000DF38A538A99E65EF681FDE635AD092C73B
-:101BD000909E69DF2552FDD5A6907A9AC54D4CD1CD
-:101BE0007C60922789E02CEE21897879BC5747F7F1
-:101BF0008A26D9C83F316B88F3AEBB914FBE63E1F3
-:101C000078E9E77C1CE5B759EFC751DCD42297F39C
-:101C10002E9CFFE2DFAA14EF3B6BA8E003096DC323
-:101C2000306EB166B5C23CB0CE7617971B6AFC2AFF
-:101C3000F342BE2FD0830F4031313355F0D34006ED
-:101C4000DE077CB2D2E4D1E0FC3BA6319F8A76A3CA
-:101C500017793C734D2A8F1B7E12E91ED29AD84009
-:101C6000461CF4774EE0B366722003E3246A5E4CB0
-:101C7000A43889731AF75BE277F493D6E4437BA820
-:101C8000D74BC4C362FB9810FAA929733BB19E1AC3
-:101C9000EB76E6D971BE8E0B24C7BE14C9508E35C3
-:101CA000ED8FE4714E3F0FDB620DC15399A0B75E1B
-:101CB000028F6C268F877C4CC4633FB62DD18FFA80
-:101CC0009BACFF98C53B03E180EB40F97D9ED69429
-:101CD00081F2AD9CEFBCA8269AE73941DFF3C29BA5
-:101CE00078BCB4C6E329B13EE6DB2D8CE2B83B9E5E
-:101CF000B3523CC999C4D67D38FE99E706325C7F61
-:101D0000BBCB3FE7009583FC0878AB7ADE1AC0F5C1
-:101D10009C7E8EDB9B4F5BB83C767A528213F156E9
-:101D20003879C32CB2C76CB52A88F7D30AD312B05E
-:101D30007C5B6FB70FDB37D4539C7415B009BC8F35
-:101D4000036921DEAB39BD6D20C5879D7E5BC51B58
-:101D500051F87D357EF7B2A6593F4078ECE0FAD3D2
-:101D600099E7FF3E30F41E9A4CABB6EAE3E0249DBF
-:101D7000C8F246B12F1B059C5765F273AB36A2F92A
-:101D8000B1545A27873BE089F43E38F8239FBA0EB6
-:101D9000E320D215E41B4F025D3D8576851D5CBFB7
-:101DA0003AB3D34271E155FB233D1477B6EA7A1377
-:101DB000C541A85C0EAF3201F82855A8DFAAC95961
-:101DC00074DF17E04D7A6CC736558CC3981DD7BDAC
-:101DD0009DC7F916A1AC48E583A9FCB4C89FDE37BE
-:101DE00098E43AE8DF83F795AA7EF0430EC7299579
-:101DF000EF32B263D888BFD674F9714646E379579B
-:101E0000BBEAA668BC07C8DE5719CA2746385D3248
-:101E1000BBFB205FFD83E05FD5FB9ED6901F548BFC
-:101E2000FB21D5CF2BDC9F0CFB0CEF4956AFBCE957
-:101E300071A2CFF72C2C1DD673AEF96751A1F8080B
-:101E400008BED6555F7353FD6AA88FFD54AF7C273B
-:101E50008AE6B3DD427126463C5E73FBE7D56B6ACA
-:101E6000DF451FCDDC8E72C5FA59EB7F7C0CFD7F00
-:101E7000B133CCEDA3AFCD74AFECACA5790EAEFF12
-:101E8000ECAE30E2476763387FF80CF8A72F13E712
-:101E900071FB4F292EEB7753E83EDC5CBFBE5F3908
-:101EA000EE9BC8B7319E24CE1D8D717DB5EF73FEBC
-:101EB0000678B983DABF6FA1F6C6756C15FCBE6BE8
-:101EC0007FEE8A207A38DB97E3E5ECEE4C3A8FDA46
-:101ED00063389DC37C53F0FEDCD95D9979742F0D76
-:101EE000851BA0872AA1DF9E8D694E718494B75B04
-:101EF000849E16809A4837D806E4BEAA7A2E575593
-:101F0000DBD6507C08C6D50ECFA734608DBD323EDF
-:101F100016E895F4C77E597C7F311C2F5EC46F9301
-:101F2000BCD3AC21FFF60AB9B066A731BE9697FFC5
-:101F30005DEC4F9C6D2F19CF8B74E85328CEA47A9B
-:101F4000F9C27948E7D575EBEEC67D26E75F6D6689
-:101F500085A887B52B2ACDA33D8CDD3B19CF8DD02D
-:101F60007142E4362DABCB9ECA1CF124AFD2391698
-:101F70009EE5E474832726DE135DAEACA1715C524E
-:101F80009FE5EB927002706818D7D73E5A94F7B06D
-:101F90006E394FE3BAE57C52B2B89DA4DDE5FCE9A9
-:101FA00048C4F36F54BA4F7BE99BA1D1B1DDC8653A
-:101FB000C1735D0BC6B7C2FCB391F6D0EE92C9ED0A
-:101FC000A8D5183F0BF3CCD8A88FEBCEDAAACF0F49
-:101FD000DAA9CFE7ECD5E7735BF479F71BFA7C1C41
-:101FE0008EDB9BEBD9787F17F56C4C51CF765AB9C5
-:101FF0009E8D79D4B331453D1BBFA39E8D79D4B35B
-:10200000318F7A36E625BC51DFC63CEADB585E22CA
-:10201000E05423E224110F48EFECE530DD7D9F8B87
-:1020200007F93D0EA003BE6F6668B46F9EC41AA484
-:102030007770BB52DF293627C6FBFA62BDE3B38651
-:10204000E17D8FD695898837731BC59D2E7885C70E
-:102050009DD6E487D9D1BED1B6E2B39518CE393535
-:10206000D67B7B566FBCCFD9B11DE15B5B7F98EE11
-:10207000BDB72D75BE7F0BC71FD95958652CC94DEB
-:10208000A578CEC5F68C4763DC375BA38FF336C6E5
-:102090007D1BE3BD8D7420E5BD4D968E44E4EB279A
-:1020A0009EB3ADC1F99F0813F74FA6DB0CFE7E214E
-:1020B000A7AD55B6E0795D9315CBFD4947403EEF9E
-:1020C000E69C9569F9E5A1248777E5D72826BA1714
-:1020D00097104FE7D06231A714A5A37D15F2B97907
-:1020E000263A372F815C86E35DFA4025F921738318
-:1020F00049B79E81FE701D7D65EF8835DC6BE8ABCE
-:10210000AB3FE440AAE15EC3207D1CFDD4A587500F
-:10211000BF9FB266A8AE5E45F14D06388A790BF9CD
-:10212000B502CE0F0FACEFC9251B5210BF8BE77560
-:10213000B6AF42F9F4A530BA175689FF0FF86225F9
-:10214000F489F7192BF78AFBC0F5FA73B85C9C4346
-:102150009566E673C406E9B0D2C13C31D07EDEA0FC
-:10216000D6DC00EA156FFF7EB82315F58AD17D9085
-:102170001FA5583C14075BB3273D6629F4BB22CD4D
-:10218000FB14D2DDC9A6C33F29C1F3700FD7F74EA8
-:10219000ACF96514C589097A4BB138C211EF9B9B24
-:1021A000787C1CDAC7D4D8205D6C6E8A0B1F600F58
-:1021B000AE374807DF109E003FDC8E53F93AF93DF9
-:1021C0003A9BC57A472B3E94A7E5FA168973850D8D
-:1021D000E0FDDC27F227857E21D7796EE0A15C2720
-:1021E000DEBF683890A2223F37EDDC9E08A9DBEA0B
-:1021F000DD87FBAE7273FA1F47C238551FF2F5FC3C
-:1022000065FDD8A81B50FEDC657117417E55D3B320
-:102210001AEAD95566BF46F195CF6DD630BEF87B28
-:102220003B36D3F7393B4A299E722EAB23FDF394FC
-:102230007C7740C0A3728CB2D101F34E1AC8E5BEC0
-:10224000CA70EEBF03F9E84D7CF7E3D20E250FE329
-:1022500078A616EFD14AE1FBFB82CF18F749E7BB1E
-:10226000530A7A133CF87D8D0F1968F16957EE8B8C
-:1022700029975DB42FA65ECE26BD6C5A6020D77F0D
-:10228000730CFAEFBBFCDD85CE16BE0F2AB540AF4E
-:1022900029B84F5EB3909C5B0BE7CD887CD4AB191B
-:1022A000BB11D2E291AA8E5E178C8BD0D1F374163B
-:1022B000B24FA0BF3B316824243FB5284D57FFAE35
-:1022C000A9D906FACF0F96131FB95177BFAE7689F9
-:1022D000CFA9909C3946FF9DF13841C66ED3B5AF6A
-:1022E000659383F590BEB77239B8766FCC16B4F7A4
-:1022F000559AB8FE34DDCBBFCF3FC0BFB3E94CB772
-:102300000FFBA7B9FFC8CF450BF905A43D7D3AFEE9
-:10231000BB1BF8C349DE753F1CEFC5A33D42777F69
-:102320005AF80371DE88875A6137AACDE276A35A3C
-:102330005FAB86EF0E00FCCD71B154CF1687F191E3
-:102340004D0AD915315D42F192FA382CEC0FE318A1
-:10235000E71F514B719F18CB2BF1DD1FC4EF2B3CB6
-:10236000AE74EE06631CE41AF247CE477B5008DEDB
-:10237000EE1EE814F28A7F655F845F919247F72230
-:10238000771ED230CE6EEAD4983CDC3746FA927C87
-:102390001DF633E9DF9DEF1E26FAEAAC3413FD5E2D
-:1023A0000D0EF33DDC8E6AA4BB39AC55C37BE273E2
-:1023B000F62A6ED447B11EC2A32FD2A3011E71B15B
-:1023C00057C241C2A70B5E7B8D716E1C4E730F28E6
-:1023D000FE40377032CEBB27B8C9F5CCF17AC7239F
-:1023E0005F90EB9A8BF3C7FE61FED8BFF443B01148
-:1023F000C6FD9946F6A9F9C53C3ED6480F932F7302
-:10240000BBCB9D97CD944E2DD2EF476C87FB62DA04
-:10241000E5782AFFAEF4321FE6C9EF3F5D1B9DC889
-:102420007548BE1BDC0FFCDEC0D5DE0532DA1DE7C9
-:102430000E14F1C8C3D8305D3CB2E0ABC6F6C67826
-:1024400064290718CF97D24813C54D76DA5349BE91
-:10245000907CD62BCE0FEF8A2FA99E17EAF1D9C414
-:10246000EBCE1BAFB0FF2D8A4CA5F7185296C6C510
-:10247000239E4AC31C147F5FBA54A5B8E752A8E74D
-:102480000C914F562E4F4BC1F3E2F88399CFF84091
-:102490006E3FFE40AFF81130CE8915965E3667B0BC
-:1024A000DEF115052918A771629D75BABF1B78ADBD
-:1024B0001BC8CF87DA1F1FA5F3ECBCE9DDA8E9D064
-:1024C000BE66C54B5118E65FBD829FE303D3BC4D8A
-:1024D000037BE379BE79BB03E1E7D89C8B76DF4DC4
-:1024E000701C607B293F54AD28E883F245CD3F0E38
-:1024F0003FE3C07BD64B2DF1287F9EFE00CE438567
-:10250000CE33921B4E854117E44F8B243BC2298565
-:1025100079D0AF74CE74E8AB55A817E635670420C0
-:102520005D68F56E1A88F2FF8A67496EA97A686954
-:1025300086AA62BFE9D1DDD94D64BA5D9CDB28BFB4
-:10254000638AF23BC6C9A0FC8E7994DF3145F91D40
-:10255000BF2FD8A097FF5E10FE42694FEEDFD891E3
-:1025600087FE3BDF18965547E7AD3D0BE5F5C54ABD
-:10257000B81BF9D162949530FF4918E9B16C6B2210
-:102580003F6F059EEB6DDC6FF4B5B89F7B7307C89A
-:102590006421F479CB651B0BBD373B9AC5E8F26328
-:1025A0006D89BAFA050E97AEFC7B090375E5B73A5B
-:1025B000F374F9DBB36ED0D59FE01EADCBDF31E213
-:1025C000565DFD499E49BAFC94C219BAFAD38A4BAA
-:1025D00075E5774D9FA72B9FE15DA8CBDF5DF98067
-:1025E000AEFE3D754B75E55F9B4023057A6941BDA5
-:1025F000CB8AEFA7D828FDBEEA3023DF58FC9B74B6
-:102600003BE27BE458535D77F6FD53421E4ACFF61A
-:102610009C407A4916EFE3248B776EBE1AC8F19975
-:10262000C480AA48DF6D4D44FA35D633968F8C7836
-:10263000FD92137058FC7CF43433F08991D7BF3E7F
-:10264000340DF20F3E3F9EE76F7AFD97A9905FF73A
-:10265000FCC3D3CCC0A7460E79FD129627FCE276C8
-:102660009E9FC248F4787AD0DFA7FA70FEB7A4AE76
-:1026700071733B49B7F7CC658A70C0FBDA08074C29
-:102680000340BF98BE0EF48BE91B40BF15C09FDE10
-:1026900002FAC5F408E89FF8FD3F41FFC4F45DD09D
-:1026A0003F317D0FF44E4C5B41EFC4F4770DD329DD
-:1026B000FDA0C14BEDFED05049E9D1863AFAFE515A
-:1026C000433DA57F6EF0D1F7D841D28E1160BAFBA1
-:1026D00001E867447FE201CBB9503FB0F4574AFFAD
-:1026E00064631D6B8B407ED1668EF9D416F43BF685
-:1026F0006C0730B34F43E4B168E6491E44E3F77317
-:1027000090DF487CFF557F6FEA20E03B1FBAA6A40C
-:102710000F55F1DCAA7B13DDB21F8AFBF5C67EBF25
-:1027200012F4F1D7419E4C6C27FDEBD2BFDD15377B
-:1027300013E27F3785C4EBD05F48DC8DF483CB3860
-:102740009F9B6DFC9EB1F473CB781ED95FC1178C33
-:10275000F8C3A8D566925F22CD2C80FDCBB89D51E1
-:10276000B6E63C8C63185563A77BB57DE0BB964FFE
-:10277000F53C2AA45BFF0AF573837EF53E62FE50AA
-:102780004EF32FF8C24B76D85122AE00DBDB78B97E
-:102790000FDB8F42DBC27594127F7A1AEFEDE607EA
-:1027A000FDFC583F82D70F607F03FE06E34505F727
-:1027B0004D726C731EF2EBE4F976BA17BA7174803D
-:1027C000DEB322A313C0658AD49F6C222FFD793B10
-:1027D000FA901D69ACD8EBC39CDE1988CF62ABE3DD
-:1027E0009308DA6769C9689F9C24E4E77F82B75938
-:1027F000D84EC253E245E251E223247E8AF0D01340
-:102800005E8DF834E251E2AFE08B205E10AE57E20D
-:102810002D8857B4E7FEBBE0ED3A337FBFCC5A6357
-:10282000A377D1AE86C77B3BD8F868A8F295D3FBD7
-:1028300015F2CFD2CBCEB7305FCE468F47D4CAF297
-:102840006F7B28F77ED161890EC1F7CD02DF19AE0B
-:10285000EEEBCB7AF23D06D97F410FF5DF0993719C
-:10286000171E7BDEF060FCE3E2020EFF42974AF0A7
-:102870001F9B3397E46466E772A613FE43BE34FEE3
-:102880009B627AD7F24BB6133DB76C7C2FBD7C5A56
-:1028900068F05BDF26E4D2DB0C72A951AE7C71904C
-:1028A000F067BB98EB3BBE57F932E76BD7FA5E2572
-:1028B0007FEF749CD8674982CED29C2A1B8974C44E
-:1028C000BC744EBE81EF9DE6E2BBA03ECADFCAFCEF
-:1028D00094DECE0274BE4E00468CF93B18A37BE416
-:1028E00087232696E0DDB8B143C70EC0EF21EFB2D3
-:1028F000BD87F39BAF7AFFCB11F22EDBEBE39C7429
-:10290000BFF2755B1AC95FB80F2D21F6C0B7E17C25
-:102910001A00E7C76138BF307D13CEAF01B0DE5F6C
-:10292000C3F985F9DBB296326C37DEA98FDB91ED06
-:102930006F778C05C5A467F8DD9EFB723F84EF3B83
-:102940003199E3D07EFE4ECCF5E370BDEFC4F43197
-:10295000F1D4AA513A78FF80EEE443B90F82E38DB7
-:10296000A7F18CF095F034C251C2F75F80E7E5EE35
-:10297000E0F995909F3B6DBF8F4A4845FF5D947885
-:10298000C7F237B92AE44FE3D412315EF5269AE74D
-:10299000A8FA1B987928F96D7210AE35360E2FA360
-:1029A000DD8A6DED630A8DDF3DA379C3B2619CCFF3
-:1029B00036AA746FFCFC8B61648F3AE5E7F6B6DBF0
-:1029C000156F5436CCAF4675AEC1F747D93BFC9D69
-:1029D00033F6CDE194C991DF814EB7F2FBF635B6FF
-:1029E000F1DDE251EA53D12E0FED7326DE8B9472A6
-:1029F000453F2B7F9740BE5FD8939C313C9CF3C1F1
-:102A00007E56CEB7255EA11DE593A09FE1C0E7925B
-:102A10007E1A4EFA45636F4F06AE4FDA113AFB4508
-:102A2000F891DF8E0A64D3BB5C8547548A277E5DAC
-:102A3000C4777D2FBBCE9E0A789A94EE756793BEBD
-:102A4000F98D8A7CE65D58671CDA1F8E0CB593FE03
-:102A5000F81DF5D011D9825FE4B25CDD7D35497790
-:102A6000AA9DE2773A3FE0F7F116BDCDE33617F5C0
-:102A70005629FEDF1817378A65FC14ED8D637B59E4
-:102A8000DC7E6790BFC87780AC0926E60C91B3C3A3
-:102A90009CE1CC19329F88AC585D3ED2DD57573F40
-:102AA0007A44AAAE3CC63348571E5798AFCBF72E90
-:102AB000BE5157BFCFF431BA7CA2F7365DFDA4CA30
-:102AC000C9FA3CEE3B807B72DD4C5DBBFEF565BA1E
-:102AD0007A2E5F95AE9CF93CAD59F1C8C7F95FDA23
-:102AE000EA45BAF2A7A20A79FCB87D0EDD534C6F15
-:102AF000FA81AE3F89DFA4388E5FE6E4E7830FFEFC
-:102B000023BF85C0734182FEDC18EB18FD8683521B
-:102B1000BD5D23E92A71500FFCAB7450CBF474D027
-:102B20008BC7F114BC3DD489728C11FFE88F085D0E
-:102B300027FA2342E182FE88D03CFA2342EBA33FEE
-:102B400022B41CFD11A1E5438FE8F13FAC558FFF86
-:102B5000EB8F8EF9A778BAA14D4F0F463CDD744A32
-:102B60004F1FA3BCE10497B1208F21BD4B3C4D8783
-:102B7000FFE89C67C5D16837B88579E85EC0FF1665
-:102B8000BE5EC816F62381AF2FD99A61F8CEE5C58F
-:102B900052CEC77B3AE79FEBEF7909F9EE09E4F3F0
-:102BA000C3AEB403C87852DF188E4FDFB130E2579E
-:102BB0005F9BDA22F1FCF8BEDA4676F944D6F126BC
-:102BC000BE3FE3E8E53D84FCA80F460F40F993F3D0
-:102BD000EECCC3736ED6AFAC2928D7CCEACFDF13C7
-:102BE00064396DF44E8B9CCFAC241E7FF476B6E036
-:102BF000D36E1E87F46E36B7FF44BA1D14075D9A74
-:102C000023DEA131B3945983910EDF0DCB443A5B9F
-:102C1000CFED5C6D1627C5B5F8801ED14F89F23611
-:102C2000CAC3C9421E6DFC93CDC6E98EE9CEF781B9
-:102C30007E9B2E0E377B8743971FDC9CA0AB3FE427
-:102C40008053579E17C8D2950F3DE2D6E587B58EC3
-:102C5000D0D5BFFEA84797BFA1AD5057FFA653C51B
-:102C6000BA7C12EB7802E1A9E6A4123CFA2BC20E60
-:102C7000E0E47899F5FD78BA4F23F5081997ED153A
-:102C8000746CD447FA6B5E8AF36E4C646EBA0F6252
-:102C900013FA20D3EB295E11572DE579E6D3C755FA
-:102CA000CB78EA2E7D46E82F529F0889A7F6E0FCF4
-:102CB000653C7517DEC5FB9246FA74E408BF906167
-:102CC0001DFD357EFFABF1018DEEB1C8F919E73579
-:102CD00043C4036EB375FFFE504A0EB71B6C4E2DF6
-:102CE0008ECF817ACFC0F144F0BC623C779B0FE07D
-:102CF000DBF823CDBDCC79F5F1660DE1EB29C17789
-:102D00005573E89D4EBAB726C7CD15E3F6CA55BA36
-:102D10005DDFAC681EDFC5A235BA77D1F3781CAE93
-:102D2000091A5B4EEF24897B08F7AC695E9B094565
-:102D3000255A9385BFABEFB7A09DA8680CC88179D1
-:102D4000C027B6ED5B6F07F9E7997A33D97D86E541
-:102D500024DFE91B10BC57D21FF434A49322C43FD4
-:102D6000F4FBFC601EEF7C670E5F5F81FA4DD77D40
-:102D700000AB8ECF73FDAF1BBA237A94EBF8BFBACA
-:102D80001F20E9D70827A95F33717E0D10F392F059
-:102D9000EBB29F08F8C9FB19CE8596E22D76BAE70B
-:102DA00051887165127F070773BA5C2DE081F59039
-:102DB0001FF554AF40CD89463B782773463BAE6242
-:102DC0000FFE3FBA3741F0EFE9BE574F7CE20AFEF3
-:102DD000D0C3FDAF9EE893FEBEC33DB0103EC1E33D
-:102DE0007D043EFC034CE4575F15A9DFC7FB73B8B5
-:102DF000DDA544EC2738B7ED797A3EC1D0AEDFB817
-:102E000042157C624ED7EF4FE0F7D92B2C245F336D
-:102E100056FC18C619FC65BD85E262477918C931B0
-:102E2000651B15FF6605CFD1910938FF529FFE3C07
-:102E3000BE85B957A2FFA37CB5FEFB5C3BFF9D8A14
-:102E4000D9C6775384BE3EF72AFAFA8E1C718EBB20
-:102E5000999BE42EE1FFAF146D8C7257A79FFBCDB9
-:102E600050DF56B9DD89E2C6E4F9EE44FF4DC87B78
-:102E70002000CFF02C3CC7979BBB8DE7EB82670F00
-:102E8000F10AE7EC225EC1CEE3333AF78671FFA682
-:102E9000F42B89FAE77C97A81CEB636FE7F378DCE7
-:102EA00085F42719FD559D7613F95B3AF746927F15
-:102EB0001EFD38D14007674C7BE247B882F3F3B67A
-:102EC000A93A3F8831F52E7D89F4C58169DEDF217D
-:102ED0005F3F6B76DBDC907FD0FE3ABD1F5524EC64
-:102EE0005EC6F976E95D23F9FB2E9D3E2ECF761660
-:102EF000F27738802F32DC47320E6112032D15D263
-:102F0000D2C00D349FEFEACF9972398FFB312FDF9A
-:102F100044EDBDAB6FA07CFFE56B17E23D98698D7A
-:102F2000732DE8C26E7B62494138346D4BF62F0B2E
-:102F300047BC8D56BAB5CB5F12786B33C4D7CBB4D0
-:102F40005CF0237C438EF3251187B454A17DB048F7
-:102F500061322E89F8B8CC5F6A12F9029E5FBC829A
-:102F6000E7DBC4FBFADB851D05D78D29AE1BF5FE1B
-:102F70009DC2CE82EBC614D78DDF916F611EF9160C
-:102F8000E6916F611EF916A6C8B7F07B192B4EC9E2
-:102F900053B91F6A5CE8BEBB6C63E342F60BFAA14F
-:102FA00042F3E8870AAD8F7EA8D072F4438596A3DA
-:102FB0001F2A348F7EA8D0FAE8870ACDB311B7064E
-:102FC000F3C8E73C9374F92920E78F0BD9DFE88732
-:102FD0000AED1FFD50BAFEBC0B75EDEF66F5BAF6B3
-:102FE000E8870AAD7F6FBDA2F353DD2BDE392DDFFD
-:102FF00010C7E9C759EC1E0C74F05F11FFB8DF92DF
-:103000008A786E99C7F5B27037C7735321C7BB89E9
-:10301000713C77CC203C2FD178BE80C7271BE907B5
-:10302000FD3DE32CDCDF8329FA7B30457F0FA6E8EA
-:10303000EF1997CEFD3D98A2BF07BFA3BF0753F47A
-:10304000F7608AFE1E4CD1DF8329FA7B30457F0F63
-:10305000B6437F0FA6E8EFC1EFE8EFC114FD3DF8DE
-:10306000FD18FA9D2CC179A11C3F40A73F021DEA23
-:10307000F447872E8F727C687D94E343CB518E0F8B
-:103080002D47393E348F727C687D94E343F3753964
-:103090004EDA5F28CF87B643793E343FB8C9F7266A
-:1030A000DACE266CBCF006A66D91CA330AB08C85C8
-:1030B000BBF6DE897EB9B63025250638A74579E509
-:1030C000CE7190F78AF8BF5CD661427C7BC57BEA03
-:1030D000DE00A378CBC17F4DA4F217C4BD7EFA03F6
-:1030E000BCE7ED65F4BB24D25F2CDBBB9943C55430
-:1030F000D60FE6BBAF671C5FD623FE19320FBC01AB
-:103100008CF12A794BECF918EFB9DDA4509CC4F688
-:10311000653C4ED84857DB045FDA6EDAF33ADE03DB
-:10312000E92855E83E7086991DB1E4239CEAF2F146
-:10313000FC5D3B3846ACABEE46BC6F22E72DED9B09
-:10314000C027E8FEDCC88ED6B1D1D08FD7379A7EA3
-:1031500027A548E37203B6437D32DBA778B684D057
-:10316000F7E38339DFF4FAF8F83FDF3491B70BE780
-:10317000ED7EBE298AE03871B942F1522377320FD1
-:10318000DECFF58B7967EF0CA8385EE9723E9EECD6
-:10319000B774630ADD5B2C656DE312C847A230E4A7
-:1031A000DB126EB0BE37707DA0361C41FBF4B5DE7D
-:1031B000FBB9F9BA98028CA3632D8CDEB19C70DD4B
-:1031C0006F75EB25B40FA77EE95CCBF429F45EF0B4
-:1031D00044DFD265A86E4CF02D7CB337D6DFCADC55
-:1031E0002E271D45742F56CE6790678F098E459602
-:1031F000C35A4D610AE29B1D8E0BA11FD8F95311D2
-:10320000DF796E0BBDDF3BC9ECB0D0FB113DC49F35
-:103210005CB2CBF81383BC608833695C723405ED13
-:10322000C98B224D64FF5DF412FF3D00EF0685F867
-:103230009A94834A459CDAA5E56FF6BE0BE1BEC7BA
-:1032400042FDC9F893DA347F8A09E3EAFB6ECE8D3A
-:1032500055490EF8FD6094037CBFBC7304D65BC176
-:10326000DFB1BCB47C5A74807AE2FE9A0A01AF0ADC
-:1032700011C7548A0F7AABC1DFD392F73B5813972B
-:10328000F7A43DA7F43743DF42FC963E2DDE955E62
-:103290005D4AF7B28D7144F3965B28EE689E412E2D
-:1032A000AC167261F555E4C2B3830D72A1FCBD1476
-:1032B000D186A9FDFE80717BF25E628985EFFF9267
-:1032C0003D8CECB0254BC79AE81DE49738DD942C73
-:1032D000E5F24DC9CB1EBA5F28E5C5F7851C33F969
-:1032E0007212C1FDF7426E9986F19500DFA2B630E9
-:1032F00011879548E95D9779BCE5643BE7036D0765
-:10330000F93B109D3E2B97A7DE60FC1D33035D4EFD
-:1033100032FB4D78E1CE3D12E812F213500E82FEE0
-:10332000A6A35C148774EE2AA0F8BD4285EEBD18F2
-:10333000E9BCC852F726C687166D636E1F0BA573CE
-:10334000A05FECCFA7D0FB005EA1D74AFA35D2FB35
-:10335000AC08618FB2737B53975D0265547CA4DB2C
-:10336000177517CA8DB3D0B7D797130CC69D45E60E
-:10337000F0F2F4DD51772D4725A7073B85FA038D41
-:10338000E0E195EF20F46037407B01F2C97BEECBA2
-:10339000D3CA42F8E49743C6140CE91DC47759D741
-:1033A0007DBF1C7A1774D183E9F47B383DC9C3E52E
-:1033B0000057DC17B3A2DBEEC75F661B97CB3CE37D
-:1033C00046E0EF0B32F9087900E308678AFCC2DCBB
-:1033D000EBFF88BAEDAC089EF7ECEE7717C685D404
-:1033E000DADAC623D92DC8F116E23DC6207F2AF6C7
-:1033F0002429C89FF202A813CEC810E78FC11EB1BE
-:1034000030D7C9D769B04B94E770BE2D7F17E5F868
-:1034100083FB77E37925E77FBC87DF6198976BFAB9
-:103420005FBD0761BCFFF0FDBEDE99B9D0FF63262A
-:103430007E9FBFAFDAC4847D88FCC2925F30F10EFC
-:103440004610EF1E7A47B7F141C5116A9FF2AE569A
-:10345000F83DFA1EEC382CABE3896DD06E568346EE
-:10346000BFE3B72983D3CF26A01FFABD14ADF54D16
-:103470009B2B08C78FEB1FB1D0EFD2B0403ABEBF35
-:1034800033B32ECC8DFCF8CB21C575B9C3F0F7480A
-:10349000DCC4870A30861CCFF35EC58B713DB56BEB
-:1034A0000E3D83EF092C6871D1EF95941EC85B899E
-:1034B000EF9C7C39C45B8FE5A57607BDA7317F798A
-:1034C0000C9D5FB3FA887BA1AC83FC6C12FE4DC2ED
-:1034D0007E75AB9B89DFDB12F71D80414ED2D5EBA9
-:1034E000DE8E27ED84463B83F17D899EEC0BD29ED8
-:1034F00080F6032DC4CE28ED1396ACE333506E282E
-:10350000D1F4F712657A2857E8B9420F9CDD756E41
-:10351000E58CEF83F2F13AC541EF4DDA9D77DD009E
-:10352000F98A23168CEC6445B14E0DDF1FE800FCD0
-:10353000627C7419EC57E43325224EAB62C30DB4A0
-:10354000DF2AFC9076F30EA74CEF5E7738F965A47E
-:103550009F8087FC96150E8F161BB2EFCB9B14DD58
-:10356000BB0332BF2797DBE34A602B23FCEEB9CFC6
-:10357000A5E1DB3E25204660FCDFA15CA7CE7F0CE9
-:10358000F5281EA42895BDC5DF818779BBF878F999
-:1035900021FD9735F17BD3320FF549FE793537920E
-:1035A000F057EA8075BB3075D03C010E04A78EB58C
-:1035B000D09F93C6217C9407FC16D4B74B300E05E0
-:1035C000F2331D7E0B8E53B69CBF63E25DC3C7F121
-:1035D000AE8ED106A37C647668C9083FF13BAD305E
-:1035E0003F92232B002E781F0BEFBBE1D962844F53
-:1035F000A9986F45530CBDA310FCBECE82F898D19C
-:10360000C3BB08E705DD962D1F4DF7D72BCC1EBA9F
-:10361000E7E015F0FDCBC2B087D03F3063FDE31685
-:1036200017E43F11F47B5EECBBA2D4403ABD57B423
-:1036300030CC8DF39CE168A2F575C1F7518087828B
-:10364000EFDC14137C812E7C18B757B15E8FCFE06E
-:103650007C387C2BD697D27E9B63F66A8ED0796CB1
-:1036600038948EF7AA66C0FEC6772598C34BF72517
-:103670003F7DF4AE145A27CC13E11AE9768EC7F7D2
-:1036800087804EF83D18B11E79AF5B8E6719C2EF87
-:103690009D5A8670FB59CFFBD243724D23E017ED44
-:1036A000DE3DED4B0D19378CAB55F0DF9130EE530D
-:1036B000B93FE5BE94FB54EEDF672CC5810425C8F5
-:1036C00067E09CAD7BB11B38150CE1789829F00AB6
-:1036D000707D23F49E57EE10BE9F4B52F5FB1DFBF1
-:1036E000C37EFB0EE1782F191348C77799647D39A3
-:1036F0006E492C6F87748FF4D6578C87F517517DE0
-:10370000938E5F9477F18B9D2BE2915FEC51B81F04
-:1037100074EDE1E4EFA3FCBA8BCBAF676BB6CDC71A
-:10372000F39299FD29A1EFFBCF063907F9C41C716B
-:103730003E5704BAE7173B33BCD94342F673C5CFB3
-:1037400076657839BF0920BFF9F3AE573FBCD11970
-:103750003C4FE57ACA56FFD6526A0F859F22DE1D7E
-:10376000E9A4FB78E576CD89F1CEE5CB4B89FFB2B4
-:1037700004900B9590F833035D942E57E81E597909
-:10378000FD70BFFABFC8A7CBD74CA2770F24DEE4E9
-:10379000FB2CF27C95F39F28F0356908DF87330511
-:1037A0007DCFAC1CAD25F622B91BC32CD90CF17D05
-:1037B0004685FE7B17DEBAFCD7392B71BFE0FD22B0
-:1037C000D24FD658B8BD6F27B73F9E5DB4FFBD3B03
-:1037D000A1DE99C736A730558F379453E70879751E
-:1037E000AEB0FF7583B73294DB647EEE268EB7F2FF
-:1037F000DDBFF904DF132B4915FC6E2D7F07A0AC4C
-:10380000790FE171C6EA751617CA75435CBAF736C7
-:10381000CAEBF21C68579EB97AB305F9C4A2211C01
-:103820008EC6FD5022E284259CF15C5242FC1BB204
-:103830003EF2477CFFFEBE85615118CF23C7794A0F
-:10384000D07D795D4C2C8E575E57FA13D487E4797E
-:10385000605CE78930BE5FCAA03FDCB72746BB5338
-:1038600016E504E55963FD47041D3E65E1BF53932A
-:1038700014D1FC1CC5352C087723FF1830A0CD8F40
-:10388000E3227DE3BC3513FF5D9B01356D9FE33C77
-:1038900040D4A6B81A4CF17D2C14BDE321BFC5C499
-:1038A000EF6FA5AA3C3D20E003E5012C67BDDAE8F7
-:1038B000F73542E26675F4ABB1ADF4FB895A2F4699
-:1038C000EF9B497A95FD487A95F4DCD3FA9AAF716B
-:1038D0007D275C1C9E9AF8DD946B5E9F95FF8EAEF3
-:1038E0005C979C1FC8F01E7ADFE38783C9DE736292
-:1038F000A93B05E3267B5EEFFA82F86ED66B5CA7E8
-:10390000DC373216BECB9FD5C4FD0E271438DFA09E
-:10391000DD89856114DF26D7F55DEDE11F0C899502
-:10392000EFF947A29C59121EBC2F8FF03B56CF7F58
-:103930005F577E9772817C674EF2EF9375E2DC648D
-:103940006D6B717FB3FA347AFFE458D389487C8F6A
-:10395000E5C4683E3FD9EE3E0BBF9FCC223527DE43
-:10396000138BB8EFB7057DD03FB4DE95A740BB7B86
-:10397000EA871EC3F7C7EF59DE87F4FBD976E74A1B
-:103980003C1767FB5CE40F8E589FF729BEA3377B7B
-:103990007936FD6EEF7D0A2B267D52E8097358D7E4
-:1039A0001FE90973055F9B8BFC12EF4BD51FA677B0
-:1039B000F3E6B8C3F2F07C9FBB81EB094526B61A4B
-:1039C000FD89FD1B8BC7231FEB7842E1BFFBBC5178
-:1039D000FF0E577666F1453C1F8CEFDEDD6769F61A
-:1039E000E03A18C82368779A6D2FE672BDE09FC74A
-:1039F000D6B7D3EF6522BCE9F7720CF69BFE1ABF6F
-:103A000047DC1169227B1CE0FD7DFC3D327C6FDDD3
-:103A10004AE78DDE7ED3FFC723E8F7DAE43DA10A4B
-:103A2000E177FA7F89106A7A0080000000000000C8
-:103A30001F8B080000000000000BCD567D4C535733
-:103A4000143FF7BE7E53E8E31B44B08060B7157C9B
-:103A500005257126FA066A4C66B4B8A13451A851FE
-:103A6000192A65CC2C019739AB9DCE68B6B10415E7
-:103A7000892C8529FB675B4A249B666C6924CE6C84
-:103A8000928CC83F266CA4240BA299A16359906420
-:103A9000D39D735F9B1A3F92FDB9F7CF79F7DEF3A1
-:103AA00075CFEF77CE7B506FE29005D06C02F1ECD2
-:103AB000ED7B2D0BAC28BB25B05702F4D0E62A8055
-:103AC000135D35591127C09E4FD69FF597011430CD
-:103AD000708750EF375DA4165600CCF465A71D65BE
-:103AE00078EE0B94029EEFE9FBA080E44C9FB93E78
-:103AF000887AEBE4DA75A919004D17525D921DE042
-:103B0000113D6BD18F82469900FB7D35D95004D091
-:103B1000F270E453B918E31702C8E8F7AF5052D077
-:103B20008F2A2D47AE14481C40317A7395950007B3
-:103B3000F8F0B655E8E71E0B0EE40A7D7BB66C4D37
-:103B4000F87D524E1F01B01B017CEFDD167EEEF3B7
-:103B5000D1CD1EB46FF15D4E213F07CE8C57C9B851
-:103B6000FF42B1B744C924BF7D03B28477EFEE2B87
-:103B700077E33D4A1510796E4A736FF3605ED11F8B
-:103B800025A5DFFEFC78CD5730E9CAC47A67D06638
-:103B900000AC9F370C0699A40C86349433127484BD
-:103BA000506E2A82C6ADD6C4FEAA585D666C9D05CD
-:103BB0006EDCDF3770AEC08EF26EB2B6DE31B0FDB5
-:103BC000274841FD8B4603E1E5D5814141BBDD7EC0
-:103BD000A6065142731A406E227E8D92048075DBD8
-:103BE000D78D49A527F6018262FFAE0E36521E4BD5
-:103BF0000251D75B282774E1BD84EB449B59F11730
-:103C0000124E7691CF44A7B481F6FD6F332861B48C
-:103C1000BE9CBC14E337D8A08DEC935784C21C71B2
-:103C2000F60DA556481AA504BF5A656DB15EB26E71
-:103C3000C8C3F383834C36A2CB8357AF6F006D0D9F
-:103C4000C09E5FCFFD0F5683FDB1BCF70F0D1AEC80
-:103C500018AFE50BBC2FC66F090DFEB008FDB45EB2
-:103C6000D955A9C5ED04A8C23CE815E3B40E6975A1
-:103C7000F10D4D19763B137E7639D24EE421B64DC7
-:103C8000A135DBCFA0DE2EC2ED6580C3E515F5477B
-:103C9000979294C5BD41172D7027039C72DC327832
-:103CA000C9CFFB317F8E5B278AC47D6BD3E1313E68
-:103CB000BCA1E8855DDC1EEB21ECC23ECB49580E71
-:103CC000A0B65A7524033E6B0AC90B6DDCA1C3BABA
-:103CD000AACCA24858EF0E534A39D800E6CD9A1C18
-:103CE000B668B29DBB079B30C5793E6606E47DBBD6
-:103CF000D4C948AE75B631AC34C819DEC3C4DF1CB4
-:103D0000083110850833CA7BF6BB3B95147FCD92F2
-:103D1000C89F8029E9995ABF0EF9715C9105FEE0B0
-:103D20008C5412CF33AF4123F1AB570F27CD15740D
-:103D30006F376C2D232FF84EB82FF0E025CC6F98FD
-:103D4000853F23FFF1FB5E25BEA21FB7D17A9261AA
-:103D50009E06BBF723CA630BD397B93861209590B1
-:103D6000FF59BD760E9DE75413F2A25AA305E473E2
-:103D7000F00352D6B028C74ABC66AA0A1D18FF989D
-:103D8000F3DA6EE2C7E9A8098C183710AB4775D48F
-:103D900032C5502F7FD1460EE5A86FCF801D687FBA
-:103DA000CDC9FD46CCF3349882A40FA6F56AC4A110
-:103DB000C57884F3C5C0CDAAD01FBEB1C050E649B6
-:103DC0007F8CD8503FAF9D2901D469989BEEFD1997
-:103DD000E50E08BAA8AE5B32BC9FD3BC999CDB3819
-:103DE000E5457C4FCB2113F5193D8FE73F7C6821DA
-:103DF000258D27F29A8D4E7FF9CD0A922685A15DF9
-:103E0000F5B01436963F9DCF6C8E5D4771502FCC28
-:103E100049DFCA838C91FEC86DCAAFDA640D4B29A5
-:103E200064A7FF3D624AD8C1587EEAF44B20207E49
-:103E300094079015D0705B13EBC3382E37152E7096
-:103E4000B919C3275E3F913CF6C74193D61FDF5B8C
-:103E50000776127FE2FDFA666C7FEE41918DE6CB2C
-:103E6000DC70B10D9CCFEFCF719CAFB00CE75CA1C3
-:103E70003A4EB8E3A39AD07F5DAC3E8837905F2975
-:103E8000E6B72E56A73A2BD7EAF2FA137589F12432
-:103E9000CE8378DE719CE3F8C13B63D76D8502B7B2
-:103EA000B28F41E0F52BC59F5C183D8E6D058B24CC
-:103EB00075CA5BF87FC42B6C5E86BC8E9EE14A3F60
-:103EC000F19F0A5F21A4CAF17EE000310F1A248B12
-:103ED00072EA19F3C04BF36039CD834ED1E7F33C5E
-:103EE0007A9D339A076D629D03D1A33A5C4FF248E5
-:103EF00032E51B3123EB5116BA8AC43CCAA38E2E7D
-:103F0000D670A2BEEE3D94DC7F0AF5034C3D6F42B5
-:103F1000FB803ED6EFFBACC14BB83F1BE47E3DC6F9
-:103F2000EB4A0D9E6FC2FDAEBAC58A1FEB340B3152
-:103F3000BD668B980BAB3917EBA8272BD85F48FAD7
-:103F4000D8D778CF2ECF8BE23BFEF543744EF72EB9
-:103F500001EDDC05A5DD745EEB10FEBE8DCF990F83
-:103F60009385BFAE5A35D722CEB338D91F4FF7E667
-:103F7000B93209574D0F7F04845E4F8F9A4B78F406
-:103F80006C3508BDB3CCEDD94B7ECAACCA25F41B49
-:103F9000F158BE1AD0E00833DC9FECD0EE1BE7AF3F
-:103FA000A7549B834BFC53E7E93FC45F0D8E36E477
-:103FB000FD24F17079021FA6221669099CE27CF4A7
-:103FC000EB11AF0C0DAF63EC69BC326278B10EE45B
-:103FD0006D0AE11612F59FE71A0EED124492F04EAB
-:103FE0001257728C282732BC55DA3DC772E9BCC122
-:103FF0001859D9E9243CA139F48C3E7CC5A5F53982
-:10400000D0571479DE18E379639C8FEF3EC1C7C89F
-:10401000E2D4E9A4181FD1FE178BBB86E2DD67E36B
-:1040200055B439FA8F54FFAC389B5CDA7FC99CD108
-:10403000FB2AE9C3C56C2EE688ACF5F5A8EB4E3E2D
-:104040007D67E0EF91C5F4DDE94D776F263DF3D252
-:10405000A8C14BF5CC8DEAE93E939E7BF9F43FD3A2
-:10406000D87143F4CD7FCDF35F8E8A94E2B00A001D
-:104070000000000000000000000000180000000028
-:1040800000000000000000400000000000000000F0
-:1040900000000028000000000000000000000010E8
-:1040A00000000000000000000000002000000000F0
-:1040B00000000000000000100000000000000000F0
-:1040C00000000008000000000000000000000000E8
-:1040D00000000000000000000000000000000000E0
-:1040E00000000000000000000000000000000000D0
-:1040F00000000000000000000000000000000000C0
-:1041000000000000000000000000000000000000AF
-:10411000000000000000000000000000000000009F
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:10414000000000000000000000000000000000006F
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:10417000000000000000000000000000000000003F
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A000000000000000000000000000000000000F
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000000000000EF
-:1041D00000000000000000000000000000000000DF
-:1041E00000003328001000000000000800003330F9
-:1041F0000010000000000002000033280010000042
-:104200000000001000003A780000000000000008E4
-:10421000800000000000000000000000800000009E
-:10422000000000000000000080000000000000000E
-:104230000000000000003120000000000000000825
-:10424000000033600001000400000001000033683A
-:1042500000000000000000020000337000000000B9
-:10426000000000080000337400000000000000029D
-:1042700000003A70000000000000000800003A4012
-:10428000000800000000000800003D880040000019
-:104290000000004000003A50000800000000000844
-:1042A00000003A60000800000000000800003A88A2
-:1042B00000C800000000009800003C1800980000B2
-:1042C0000000002800003C58009800000000002872
-:1042D00000003378036000300000036000003EB04F
-:1042E000000800000000000100003EB100080000CE
-:1042F0000000000100002008001000000000001075
-:104300000000200000000000000000088000000005
-:10431000000000000000000080000000000000001D
-:10432000000000000000000000000000000000008D
-:10433000000000000000000000000000000000007D
-:1043400000000000000000008000000000000000ED
-:1043500000000000800000000000000000000000DD
-:10436000800000000000000000000000800000004D
-:1043700000000000000000008000000000000000BD
-:1043800000000000800000000000000000000000AD
-:10439000800000000000000000000000800000001D
-:1043A000000000000000000080000000000000008D
-:1043B000000000008000000000000000000000007D
-:1043C00080000000000000000000000080000000ED
-:1043D000000000000000000080000000000000005D
-:1043E00000000000000000000000000000000000CD
-:1043F00000000000000000000000000000000000BD
-:1044000000000000000000000000000000000000AC
-:10441000000000000000000000000000000000009C
-:10442000800000000000000000000000800000008C
-:1044300000000000000000008000000000000000FC
-:10444000000000000000000000000000000000006C
-:10445000800000000000000000000000800000005C
-:1044600000000000000000008000000000000000CC
-:10447000000000000000000000000000000000003C
-:10448000000000000000000000000000000000002C
-:10449000000000000000000000000000000000001C
-:1044A000000000000000000000000000000000000C
-:1044B000000000000000000000000000000012C822
-:1044C00000800000000000800000000100000000EB
-:1044D0000000000000004000049000000000049074
-:1044E000000019C800000000000000080000494852
-:1044F0000008000000000008000049280008000033
-:104500000000000800004938000800000000000812
-:104510000000200800100000000000100000200033
-:10452000000000000000000800004010049000405F
-:104530000000004000004998000800000000000151
-:104540000000499900080000000000018000000000
-:1045500000000000000000008000000000000000DB
-:1045600000000000800000000000000000000000CB
-:10457000800000000000000000000000800000003B
-:1045800000000000000000008000000000000000AB
-:10459000000000008000000000000000000000009B
-:1045A000800000000000000000000000800000000B
-:1045B000000000000000000080000000000000007B
-:1045C000000000008000000000000000000000006B
-:1045D00080000000000000000000000080000000DB
-:1045E00000000000000000000000000000000000CB
-:1045F00000000000000000000000000000000000BB
-:1046000000000000000000000000000000000000AA
-:10461000000000000000000000000000000000009A
-:10462000000000008000000000000000000000000A
-:1046300080000000000000000000000000000000FA
-:1046400000000000000000008000000000000000EA
-:1046500000000000800000000000000000000000DA
-:10466000800000000000000000000000800000004A
-:1046700000000000000000000000400000180000E2
-:10468000000000180000430000400000000000404F
-:104690000000430000400002000000010000430150
-:1046A0000040000200000000000030000040000058
-:1046B000000000408000000000000000000000003A
-:1046C000000030000008004000000004000030043A
-:1046D000000800400000000400004B00002800001B
-:1046E0000000002800004B500010000000000010E7
-:1046F000000038000080000000000080000038004A
-:1047000000080080000000020000390000200000C6
-:104710000000002000002008001000000000001031
-:104720000000200000000000000000080000510808
-:1047300000080000000000080000512000080000F0
-:1047400000000008000051300008000000000008D0
-:10475000000051C00008000000000001000051C12D
-:1047600000080000000000010000394000100004B3
-:1047700000000004000051D00030001800000010BC
-:10478000000051D800300018000000028000000036
-:104790000000000000000000800000000000000099
-:1047A0000000000080000000000000000000000089
-:1047B00080000000000000000000000080000000F9
-:1047C0000000000000000000800000000000000069
-:1047D0000000000080000000000000000000000059
-:1047E00080000000000000000000000080000000C9
-:1047F00000000000000000000000000000000000B9
-:1048000000000000000000000000000000000000A8
-:104810000000000000000000000000000000000098
-:104820000000000000000000800000000000000008
-:1048300000000000800000000000000000000000F8
-:10484000000000000000000000000000000023E85D
-:104850000080000000000080000000010000000057
-:104860000000000000002008001000000000001000
-:1048700000002000000000000000000800002DA043
-:10488000000800000000000800002DB8000800002B
-:1048900000000008000024E802D00028000002D038
-:1048A00000002E58000800000000000100002E59F2
-:1048B000000800000000000100002D90000800002A
-:1048C0000000000880000000000000000000000060
-:1048D00080000000000000000000000080000000D8
-:1048E0000000000000000000800000000000000048
-:1048F0000000000080000000000000000000000038
-:1049000080000000000000000000000080000000A7
-:104910000000000000000000000000000000000097
-:104920000000000000000000000000000000000087
-:104930000000000000000000000000000000000077
-:1049400000000000000000008000000000000000E7
-:1049500000000000800000000000000000000000D7
-:1049600000000000000000000000000080000000C7
-:1049700000000000000000008000000000000000B7
-:1049800000000000800000000000000000000000A7
-:104990008000000000000000000000000000250072
-:1049A0000040000000000008000025080040000052
-:1049B00000000028000009C00120001000000008CD
-:1049C00080000000000000000000000080000000E7
-:1049D00000000000000000000000402002D000287D
-:1049E000000000080000300000000000000010007F
-:1049F000000050990000000000000001000050B0CD
-:104A00000000000000000002000045A00090000827
-:104A1000000000088000000000000000000000000E
-:104A2000000029600008000000000001000029616A
-:104A300000080000000000010000297000080004C8
-:104A400000000002000029780008000400000004B3
-:104A500000002FB0000800000000000400002FB488
-:104A6000000800000000000400002FC0000000004B
-:104A70000000000800002FC800000000000000082F
-:104A80000000300000000000000000100000504056
-:104A900000010001000000010000500000000000C3
-:104AA00000000020000008080010000000000004C2
-:104AB0000000080C0010000000000001000008B712
-:104AC0000000000000000001000008B60000000027
-:104AD0000000000100001000003000180000000479
-:104AE000000010040030001800000004000010084E
-:104AF00000300018000000020000100A003000180A
-:104B0000000000020000100C00300018000000013E
-:104B10000000100D00300018000000010000100E11
-:104B200000300018000000010000101000300018D4
-:104B30000000000400001014003000180000000401
-:104B40000000300001000080000800040000300474
-:104B500001000080000800040000000A00000000BE
-:104B6000000000000000306801000080000000012B
-:104B70000000306901000080000000010000306C7E
-:104B800001000080000000020000306E0100008083
-:104B900000000002000030700100008000000004EE
-:104BA0000000307401000080000000040000306646
-:104BB000010000800000000200003064010000805D
-:104BC00000000001000030600100008000000002D1
-:104BD0000000306201000080000000020000305040
-:104BE000010000800000000400003054010000803B
-:104BF00000000004000030580100008000000004A4
-:104C00000000305C01000080000000040000307CE7
-:104C100001000080000000010000307D01000080E4
-:104C20000000000100001C1800100000000000043B
-:104C300000001C30001000000000000400001C38C0
-:104C400000100000000000048000000000000000D0
-:104C500000000000800000000000000000000000D4
-:104C60008000000000000000000000008000000044
-:104C7000000000000000000000004C1000080000D0
-:104C80000000000200004C120008000000000002BA
-:104C900000004C14000800000000000400004C203C
-:104CA000000800000000000800004C300040000830
-:104CB0000000000800004C00000800000000000296
-:104CC00000004C02000800000000000100004C043D
-:104CD000000800000000000200004CD000080000A6
-:104CE0000000000800004CE0000800000000000484
-:104CF00000004CE4000800000000000100004CF03F
-:104D0000000800000000000200004CF40008000051
-:104D10000000000200004D00000800000000000438
-:104D200000005000001000000000000400005004CB
-:104D300000100000000000040000500800100000F7
-:104D40000000000400001400000800000000000241
-:104D5000000014020008000000000001000014041C
-:104D6000000800000000000200001410000800000D
-:104D700000000002000014140008000000000002FF
-:104D8000000014160008000000000002000019B81E
-:104D900000080000000000080000142000080000C7
-:104DA00000000002000014240008000000000002BF
-:104DB000000019C8000800000000000800002C10C6
-:104DC000000800000000000100002C110008000095
-:104DD0000000000100002C1200080000000000018B
-:104DE00000002C13000800000000000100002C004F
-:104DF000000800000000000200002C020008000073
-:104E00000000000100002C04000800000000000267
-:104E100000002C30000800000000000200002C32CE
-:104E2000000800000000000200002C340008000010
-:104E30000000000200002C2000080000000000011B
-:104E400000002C21000800000000000100002C22BE
-:104E5000000800000000000100002C2300080000F2
-:104E60000000000100002C240008000000000001E8
-:104E700000002C25000800000000000100002C2686
-:104E800000080000000000010000140000080000FD
-:104E900000000002000014020008000000000001F1
-:104EA00000001404000800000000000200001412BA
-:104EB00000C00018000000020000141000C000181C
-:104EC000000000020000141C00C0001800000008D0
-:104ED0000000141400C0001800000008000014278F
-:104EE00000C00018000000010000142400C00018D9
-:104EF000000000020000142600C00018000000019D
-:104F0000000015900008000000000008000015A037
-:104F10000008000000000008000015B000080000B4
-:104F200000000008800000000000000000000000F9
-:104F30008000000000000000000000008000000071
-:104F400000000000000000008000000000000000E1
-:104F500000000000800000000000000000000000D1
-:104F60008000000000000000000000008000000041
-:104F700000000000000000008000000000000000B1
-:104F800000000000800000000000000000000000A1
-:104F90008000000000000000000000008000000011
-:104FA0000000000000000000800000000000000081
-:104FB0000000000080000000000000000000000071
-:104FC00080000000000000000000000080000000E1
-:104FD0000000000000000000800000000000000051
-:104FE0000000000080000000000000000000000041
-:104FF00080000000000000000000000080000000B1
-:105000000000000000000000800000000000000020
-:105010000000000080000000000000000000000010
-:105020008000000000000000000000008000000080
-:1050300000000000000000008000000000000000F0
-:1050400000000000800000000000000000000000E0
-:1050500080000000000000000000000000000000D0
-:1050600000000000000000008000000000000000C0
-:105070000000000000000000060205000000000023
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw.ihex b/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw.ihex
new file mode 100644
index 00000000000..0ed7f589118
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e1-6.2.9.0.fw.ihex
@@ -0,0 +1,9484 @@
+:1000000000003BB0000000680000070C00003C202E
+:1000100000001AF8000043300000007C00005E3051
+:1000200000007A2C00005EB0000000B00000D8E0B4
+:10003000000080200000D99800000088000159C00D
+:100040000000398800015A5000000090000193E040
+:100050000000AC040001947800000FFC0002408016
+:100060000000000400025080020400480000000F5D
+:100070000204005400000045020400580000000083
+:100080000204005C0000000602040070000000048E
+:1000900002040078000000000204007C1217000037
+:1000A00002040080221700000204008432170000BE
+:1000B00006040088000000050204009C12150000E0
+:1000C000020400A022150000020400A43215000062
+:1000D000060400A800000004020400B8021000009A
+:1000E000020400BC00100000020400C01010000058
+:1000F000020400C420100000020400C830100000F8
+:10010000060400CC00000004020400DC0010000023
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000060400EC00000004A1
+:100130000104012400000000010401280000000067
+:100140000104012C00000000010401300000000047
+:1001500002040004000000FF02040008000000FF89
+:100160000204000C000000FF02040010000000FF69
+:1001700002040014000000FF02040018000000FF49
+:100180000204001C000000FF02040020000000FF29
+:10019000020400240000003E0204002800000000C9
+:1001A0000204002C0000003F020400300000003F69
+:1001B000020400340000003F020400380000000088
+:1001C0000204003C0000003F020400400000003F29
+:1001D000020400440000003F020420080000021155
+:1001E0000204200C0000020002042010000002049F
+:1001F00002042014000002190204201C0000FFFF6A
+:10020000020420200000FFFF020420240000FFFF62
+:10021000020420280000FFFF0604203800000080B0
+:100220000204223807FFFFFF0204223C0000003FC7
+:100230000204224007FFFFFF020422440000000FD7
+:1002400001042248000000000104224C00000000CC
+:1002500001042250000000000104225400000000AC
+:1002600001042258000000000104225C000000008C
+:10027000010422600000000001042264000000006C
+:1002800001042268000000000104226C000000004C
+:10029000010422700000000001042274000000002C
+:1002A00001042278000000000104227C000000000C
+:1002B000020424BC000000010C042000000003E83C
+:1002C0000A042000000000010B0420000000000AC6
+:1002D0000605400000000D0002050044000000205B
+:1002E00002050048000000320205009002150020BF
+:1002F000020500940215002002050098000000305D
+:100300000205009C08100000020500A00000003358
+:10031000020500A400000030020500A80000003122
+:10032000020500AC00000002020500B0000000055C
+:10033000020500B400000006020500B8000000023B
+:10034000020500BC00000002020500C00000000021
+:10035000020500C400000005020500C800000002FC
+:10036000020500CC00000002020500D000000002DF
+:10037000020500D400000001020501140000000184
+:100380000205011C0000000102050120000000021E
+:1003900002050204000000010205020C00000040FA
+:1003A00002050210000000400205021C00000020AF
+:1003B00002050220000000130205022400000020B4
+:1003C000060502400000000A04050280002000002B
+:1003D000020500500000000702050054000000075D
+:1003E00002050058000000000205005C0000000843
+:1003F0000605006000000004020500D800000006A9
+:10040000020500E00000000D020500E40000002DE0
+:10041000020500E800000000020500EC00000020DA
+:10042000020500F000000000020500F400000020BA
+:10043000020500F800000000020500FC000000209A
+:100440000205000400000001020500080000000190
+:100450000205000C00000001020500100000000170
+:100460000205001400000001020500180000000150
+:100470000205001C00000001020500200000000130
+:100480000205002400000001020500280000000110
+:100490000205002C000000010205003000000001F0
+:1004A00002050034000000010205003800000001D0
+:1004B0000205003C000000010205004000000001B0
+:1004C0000406100002000020020600DC000000010B
+:1004D000010600D80000000004060200000302200C
+:1004E000020600DC0000000002060068000000B800
+:1004F0000206007800000114010600B800000000A8
+:10050000010600C8000000000206006C000000B8F0
+:100510000206007C00000114010600BC000000007F
+:10052000010600CC0000000007180400007B00005A
+:100530000818076000140223071C00002A040000AA
+:10054000071C800032110A82071D00001E0C1707CD
+:10055000081D4550575602250118000000000000F4
+:10056000011800040000000001180008000000004D
+:100570000118000C0000000001180010000000002D
+:100580000118001400000000021800200000000103
+:1005900002180024000000020218002800000003D6
+:1005A0000218002C000000000218003000000004B7
+:1005B000021800340000000102180038000000009A
+:1005C0000218003C00000001021800400000000476
+:1005D000021800440000000002180048000000015A
+:1005E0000218004C00000003021800500000000038
+:1005F0000218005400000001021800580000000416
+:100600000218005C000000000218006000000001F9
+:1006100002180064000000030218006800000000D7
+:100620000218006C000000010218007000000004B5
+:100630000218007400000000021800780000000496
+:100640000218007C00000003061800800000000271
+:10065000021800A400003FFF021800A8000003FFDA
+:1006600002180224000000000218023400000000FA
+:100670000218024C00000000021802E4000000FF13
+:100680000618100000000400021B8BC000000001CF
+:10069000021B800000000034021B80400000001894
+:1006A000021B80800000000C021B80C000000020A4
+:1006B0000C1B83000007A1200A1B830000000138E7
+:1006C0000B1B8300000013880A1B834000000000FE
+:1006D0000C1B8340000001F40B1B8340000000054D
+:1006E000021B83800007A120021B83C0000001F4CD
+:1006F000061A100000000273041A19CC0001022728
+:10070000061A2008000000C8061A20000000000297
+:10071000041A499800040228061A2E280000000234
+:10072000061A2E2000000002061A0800000000022F
+:10073000061A080800000004061A08180000000243
+:10074000041A08B00002022C061A2FD0000000067E
+:10075000041A2FE80002022E041A2FC000040230EF
+:10076000041A300000010234061A300400000003AD
+:10077000041A301000010235061A3014000000037C
+:10078000041A302000010236061A3024000000034B
+:10079000041A303000010237061A3034000000031A
+:1007A000041A304000010238061A304400000003E9
+:1007B000041A305000010239061A305400000003B8
+:1007C000041A30600001023A061A30640000000387
+:1007D000041A30700001023B061A30740000000356
+:1007E000041A30800001023C061A30840000000325
+:1007F000041A30900001023D061A309400000003F4
+:10080000041A30A00001023E061A30A400000003C2
+:10081000041A30B00001023F061A30B40000000391
+:10082000041A30C000010240061A30C40000000360
+:10083000041A30D000010241061A30D4000000032F
+:10084000041A30E000010242061A30E400000003FE
+:10085000041A30F000010243061A30F400000003CD
+:10086000041A310000010244061A3104000000039A
+:10087000041A311000010245061A31140000000369
+:10088000041A312000010246061A31240000000338
+:10089000041A313000010247061A31340000000307
+:1008A000041A314000010248061A314400000003D6
+:1008B000041A315000010249061A315400000003A5
+:1008C000041A31600001024A061A31640000000374
+:1008D000041A31700001024B061A31740000000343
+:1008E000041A31800001024C061A31840000000312
+:1008F000041A31900001024D061A319400000003E1
+:10090000041A31A00001024E061A31A400000003AF
+:10091000041A31B00001024F061A31B4000000037E
+:10092000041A31C000010250061A31C4000000034D
+:10093000041A31D000010251061A31D4000000031C
+:10094000041A31E000010252061A31E400000003EB
+:10095000041A31F000010253061A31F400000003BA
+:10096000041A320000010254061A32040000000387
+:10097000041A321000010255061A32140000000356
+:10098000041A322000010256061A32240000000325
+:10099000041A323000010257061A323400000003F4
+:1009A000041A324000010258061A324400000003C3
+:1009B000041A325000010259061A32540000000392
+:1009C000041A32600001025A061A32640000000361
+:1009D000041A32700001025B061A32740000000330
+:1009E000041A32800001025C061A328400000003FF
+:1009F000041A32900001025D061A329400000003CE
+:100A0000041A32A00001025E061A32A4000000039C
+:100A1000041A32B00001025F061A32B4000000036B
+:100A2000041A32C000010260061A32C4000000033A
+:100A3000041A32D000010261061A32D40000000309
+:100A4000041A32E000010262061A32E400000003D8
+:100A5000041A32F000010263061A32F400000003A7
+:100A6000041A330000010264061A33040000000374
+:100A7000041A331000010265061A33140000000343
+:100A8000041A332000010266061A33240000000312
+:100A9000041A333000010267061A333400000003E1
+:100AA000041A334000010268061A334400000003B0
+:100AB000041A335000010269061A3354000000037F
+:100AC000041A33600001026A061A3364000000034E
+:100AD000041A33700001026B061A3374000000031D
+:100AE000041A33800001026C061A338400000003EC
+:100AF000041A33900001026D061A339400000003BB
+:100B0000041A33A00001026E061A33A40000000389
+:100B1000041A33B00001026F061A33B40000000358
+:100B2000041A33C000010270061A33C40000000327
+:100B3000041A33D000010271061A33D400000003F6
+:100B4000041A33E000010272061A33E400000003C5
+:100B5000041A33F000010273061A33F40000000394
+:100B6000041A340000010274061A34040000000361
+:100B7000041A341000010275061A34140000000330
+:100B8000041A342000010276061A342400000003FF
+:100B9000041A343000010277061A343400000003CE
+:100BA000041A344000010278061A3444000000039D
+:100BB000041A345000010279061A3454000000036C
+:100BC000041A34600001027A061A3464000000033B
+:100BD000041A34700001027B061A3474000000030A
+:100BE000041A34800001027C061A348400000003D9
+:100BF000041A34900001027D061A349400000003A8
+:100C0000041A34A00001027E061A34A40000000376
+:100C1000041A34B00001027F061A34B40000000345
+:100C2000041A34C000010280061A34C40000000314
+:100C3000041A34D000010281061A34D400000003E3
+:100C4000041A34E000010282061A34E400000003B2
+:100C5000041A34F000010283061A34F40000000381
+:100C6000041A350000010284061A3504000000034E
+:100C7000041A351000010285061A3514000000031D
+:100C8000041A352000010286061A352400000003EC
+:100C9000041A353000010287061A353400000003BB
+:100CA000041A354000010288061A3544000000038A
+:100CB000041A355000010289061A35540000000359
+:100CC000041A35600001028A061A35640000000328
+:100CD000041A35700001028B061A357400000003F7
+:100CE000041A35800001028C061A358400000003C6
+:100CF000041A35900001028D061A35940000000395
+:100D0000041A35A00001028E061A35A40000000363
+:100D1000041A35B00001028F061A35B40000000332
+:100D2000041A35C000010290061A35C40000000301
+:100D3000041A35D000010291061A35D400000003D0
+:100D4000041A35E000010292061A35E4000000039F
+:100D5000041A35F000010293061A35F4000000036E
+:100D6000041A360000010294061A3604000000033B
+:100D7000041A361000010295061A3614000000030A
+:100D8000041A362000010296061A362400000003D9
+:100D9000041A363000010297061A363400000003A8
+:100DA000041A364000010298061A36440000000377
+:100DB000041A365000010299061A36540000000346
+:100DC000041A36600001029A061A36640000000315
+:100DD000041A36700001029B061A367400000003E4
+:100DE000041A36800001029C061A368400000003B3
+:100DF000041A36900001029D061A36940000000382
+:100E0000041A36A00001029E061A36A40000000350
+:100E1000041A36B00001029F061A36B4000000031F
+:100E2000041A36C0000102A0061A36C400000003EE
+:100E3000041A36D0000102A1061A36D400000003BD
+:100E4000041A36E0000102A2061A36E4000000038C
+:100E5000041A36F0000102A3061A36F4000000035B
+:100E6000041A3700000102A4061A37040000000328
+:100E7000041A3710000102A5061A371400000003F7
+:100E8000041A3720000102A6061A372400000003C6
+:100E9000041A3730000102A7061A37340000000395
+:100EA000041A3740000102A8061A37440000000364
+:100EB000041A3750000102A9061A37540000000333
+:100EC000041A3760000102AA061A37640000000302
+:100ED000041A3770000102AB061A377400000003D1
+:100EE000041A3780000102AC061A378400000003A0
+:100EF000041A3790000102AD061A3794000000036F
+:100F0000041A37A0000102AE061A37A4000000033D
+:100F1000041A37B0000102AF061A37B4000000030C
+:100F2000041A37C0000102B0061A37C400000003DB
+:100F3000041A37D0000102B1061A37D400000003AA
+:100F4000041A37E0000102B2061A37E40000000379
+:100F5000041A37F0000102B3061A37F40000000348
+:100F6000041A3800000102B4061A38040000000315
+:100F7000041A3810000102B5061A381400000003E4
+:100F8000041A3820000102B6061A382400000003B3
+:100F9000041A3830000102B7061A38340000000382
+:100FA000041A3840000102B8061A38440000000351
+:100FB000041A3850000102B9061A38540000000320
+:100FC000041A3860000102BA061A386400000003EF
+:100FD000041A3870000102BB061A387400000003BE
+:100FE000041A3880000102BC061A3884000000038D
+:100FF000041A3890000102BD061A3894000000035C
+:10100000041A38A0000102BE061A38A4000000032A
+:10101000041A38B0000102BF061A38B400000003F9
+:10102000041A38C0000102C0061A38C400000003C8
+:10103000041A38D0000102C1061A38D40000000397
+:10104000041A38E0000102C2061A38E40000000366
+:10105000041A38F0000102C3061A38F40000000335
+:10106000041A3900000102C4061A39040000000302
+:10107000041A3910000102C5061A391400000003D1
+:10108000041A3920000102C6061A392400000003A0
+:10109000041A3930000102C7061A3934000000036F
+:1010A000041A3940000102C8061A3944000000033E
+:1010B000041A3950000102C9061A3954000000030D
+:1010C000041A3960000102CA061A396400000003DC
+:1010D000041A3970000102CB061A397400000003AB
+:1010E000041A3980000102CC061A3984000000037A
+:1010F000041A3990000102CD061A39940000000349
+:10110000041A39A0000102CE061A39A40000000317
+:10111000041A39B0000102CF061A39B400000003E6
+:10112000041A39C0000102D0061A39C400000003B5
+:10113000041A39D0000102D1061A39D40000000384
+:10114000041A39E0000102D2061A39E40000000353
+:10115000041A39F0000102D3061A39F40000000322
+:10116000041A3A00000102D4061A3A0400000003EF
+:10117000041A3A10000102D5061A3A1400000003BE
+:10118000041A3A20000102D6061A3A24000000038D
+:10119000041A3A30000102D7061A3A34000000035C
+:1011A000041A3A40000102D8061A3A44000000032B
+:1011B000041A3A50000102D9061A3A5400000003FA
+:1011C000041A3A60000102DA061A3A6400000003C9
+:1011D000041A3A70000102DB061A3A740000000398
+:1011E000041A3A80000102DC061A3A840000000367
+:1011F000041A3A90000102DD061A3A940000000336
+:10120000041A3AA0000102DE061A3AA40000000304
+:10121000041A3AB0000102DF061A3AB400000003D3
+:10122000041A3AC0000102E0061A3AC400000003A2
+:10123000041A3AD0000102E1061A3AD40000000371
+:10124000041A3AE0000102E2061A3AE40000000340
+:10125000041A3AF0000102E3061A3AF4000000030F
+:10126000041A3B00000102E4061A3B0400000003DC
+:10127000041A3B10000102E5061A3B1400000003AB
+:10128000041A3B20000102E6061A3B24000000037A
+:10129000041A3B30000102E7061A3B340000000349
+:1012A000041A3B40000102E8061A3B440000000318
+:1012B000041A3B50000102E9061A3B5400000003E7
+:1012C000041A3B60000102EA061A3B6400000003B6
+:1012D000041A3B70000102EB061A3B740000000385
+:1012E000041A3B80000102EC061A3B840000000354
+:1012F000041A3B90000102ED061A3B940000000323
+:10130000041A3BA0000102EE061A3BA400000003F1
+:10131000041A3BB0000102EF061A3BB400000003C0
+:10132000041A3BC0000102F0061A3BC4000000038F
+:10133000041A3BD0000102F1061A3BD4000000035E
+:10134000041A3BE0000102F2061A3BE4000000032D
+:10135000041A3BF0000102F3061A3BF400000003FC
+:10136000041A3C00000102F4061A3C0400000003C9
+:10137000041A3C10000102F5061A3C140000000398
+:10138000041A3C20000102F6061A3C240000000367
+:10139000041A3C30000102F7061A3C340000000336
+:1013A000041A3C40000102F8061A3C440000000305
+:1013B000041A3C50000102F9061A3C5400000003D4
+:1013C000041A3C60000102FA061A3C6400000003A3
+:1013D000041A3C70000102FB061A3C740000000372
+:1013E000041A3C80000102FC061A3C840000000341
+:1013F000041A3C90000102FD061A3C940000000310
+:10140000041A3CA0000102FE061A3CA400000003DE
+:10141000041A3CB0000102FF061A3CB400000003AD
+:10142000041A3CC000010300061A3CC4000000037B
+:10143000041A3CD000010301061A3CD4000000034A
+:10144000041A3CE000010302061A3CE40000000319
+:10145000041A3CF000010303061A3CF400000003E8
+:10146000041A3D0000010304061A3D0400000003B5
+:10147000041A3D1000010305061A3D140000000384
+:10148000041A3D2000010306061A3D240000000353
+:10149000041A3D3000010307061A3D340000000322
+:1014A000041A3D4000010308061A3D4400000003F1
+:1014B000041A3D5000010309061A3D5400000003C0
+:1014C000041A3D600001030A061A3D64000000038F
+:1014D000041A3D700001030B061A3D74000000035E
+:1014E000041A3D800001030C061A3D84000000032D
+:1014F000041A3D900001030D061A3D9400000003FC
+:10150000041A3DA00001030E061A3DA400000003CA
+:10151000041A3DB00001030F061A3DB40000000399
+:10152000041A3DC000010310061A3DC40000000368
+:10153000041A3DD000010311061A3DD40000000337
+:10154000041A3DE000010312061A3DE40000000306
+:10155000041A3DF000010313061A3DF400000003D5
+:10156000041A3E0000010314061A3E0400000003A2
+:10157000041A3E1000010315061A3E140000000371
+:10158000041A3E2000010316061A3E240000000340
+:10159000041A3E3000010317061A3E34000000030F
+:1015A000041A3E4000010318061A3E4400000003DE
+:1015B000041A3E5000010319061A3E5400000003AD
+:1015C000041A3E600001031A061A3E64000000037C
+:1015D000041A3E700001031B061A3E74000000034B
+:1015E000041A3E800001031C061A3E84000000031A
+:1015F000041A3E900001031D061A3E9400000003E9
+:10160000041A3EA00001031E061A3EA400000003B7
+:10161000041A3EB00001031F061A3EB40000000386
+:10162000041A3EC000010320061A3EC40000000355
+:10163000041A3ED000010321061A3ED40000000324
+:10164000041A3EE000010322061A3EE400000003F3
+:10165000041A3EF000010323061A3EF400000003C2
+:10166000041A3F0000010324061A3F04000000038F
+:10167000041A3F1000010325061A3F14000000035E
+:10168000041A3F2000010326061A3F24000000032D
+:10169000041A3F3000010327061A3F3400000003FC
+:1016A000041A3F4000010328061A3F4400000003CB
+:1016B000041A3F5000010329061A3F54000000039A
+:1016C000041A3F600001032A061A3F640000000369
+:1016D000041A3F700001032B061A3F740000000338
+:1016E000041A3F800001032C061A3F840000000307
+:1016F000041A3F900001032D061A3F9400000003D6
+:10170000041A3FA00001032E061A3FA400000003A4
+:10171000041A3FB00001032F061A3FB40000000373
+:10172000041A3FC000010330061A3FC40000000342
+:10173000041A3FD000010331061A3FD40000000311
+:10174000041A3FE000010332061A3FE400000007DC
+:10175000041A4CB000080333061A400000000124AC
+:10176000021A492000000000061A2500000000109F
+:10177000061A258000000012061A09C00000004861
+:10178000061A080000000002061A082000000012D5
+:10179000041A2FB00002033B041A4CF00002033D70
+:1017A000061A500000000004061A449000000124AC
+:1017B000021A492400000000061A2540000000100B
+:1017C000061A25C800000012061A0AE000000048A8
+:1017D000061A081000000002061A0868000000122D
+:1017E000041A2FB80002033F041A4CF80002034108
+:1017F000061A5010000000040200A468000AFFDC72
+:101800000200A280000000010200A294071D29111D
+:101810000200A298000000000200A29C009C042488
+:101820000200A2A0000000000200A2A40000020921
+:101830000200A4FCFF000000020100B4000000014F
+:10184000020100B800000001020100DC00000001FC
+:10185000020101000000000102010104000000017A
+:101860000201007C0030000002010084000000281A
+:101870000201008C000000000201013000000004A1
+:101880000201025C000000010201032800000000C8
+:101890000201055400000030020100C400000001F4
+:1018A000020100CC00000001020100F8000000016C
+:1018B000020100F000000001020100800030000081
+:1018C00002010088000000280201009000000000D2
+:1018D0000201013400000004020102DC00000001EA
+:1018E0000201032C0000000002010564000000302A
+:1018F000020100C800000001020100D00000000148
+:10190000020100FC00000001020100F400000001DF
+:10191000020C100000000028020C200800000A1130
+:10192000020C200C00000A00020C201000000A0427
+:10193000020C201C0000FFFF020C20200000FFFF13
+:10194000020C20240000FFFF020C20280000FFFFF3
+:10195000020C203800000020020C203C0000002176
+:10196000020C204000000022020C20440000002352
+:10197000020C204800000024020C204C000000252E
+:10198000020C205000000026020C2054000000270A
+:10199000020C205800000028020C205C00000029E6
+:1019A000020C20600000002A020C20640000002BC2
+:1019B000020C20680000002C020C206C0000002D9E
+:1019C000020C20700000002E020C20740000002F7A
+:1019D000020C207800000010060C207C0000004F54
+:1019E000020C21B800000001020C21BC0000000123
+:1019F000020C21C000000001020C21C40000000103
+:101A0000020C21C800000001020C21CC00000001E2
+:101A1000020C21D000000001020C21D400000001C2
+:101A2000020C21D800000001020C21DC00000001A2
+:101A3000020C21E000000001020C21E40000000182
+:101A4000020C21E800000001020C21EC0000000162
+:101A5000020C21F000000001020C21F40000000142
+:101A6000020C21F800000001060C21FC0000000F10
+:101A7000020C223807FFFFFF020C223C0000003F4F
+:101A8000020C224007FFFFFF020C22440000000F5F
+:101A9000010C224800000000010C224C0000000054
+:101AA000010C225000000000010C22540000000034
+:101AB000010C225800000000010C225C0000000014
+:101AC000010C226000000000010C226400000000F4
+:101AD000010C226800000000010C226C00000000D4
+:101AE000010C227000000000010C227400000000B4
+:101AF000010C227800000000010C227C0000000094
+:101B0000020C24BC000000010C0C2000000003E8C3
+:101B10000A0C2000000000010B0C20000000000A4D
+:101B2000020C400800000562020C400C0000055148
+:101B3000020C401000000555020C40140000057214
+:101B4000020C401C0000FFFF020C40200000FFFFC1
+:101B5000020C40240000FFFF020C40280000FFFFA1
+:101B6000020C403800000046020C403C0000000C13
+:101B7000060C40400000005E020C41B8000000016D
+:101B8000060C41BC0000001F020C423807FFFFFF9B
+:101B9000020C423C0000003F020C424007FFFFFFE6
+:101BA000020C42440000000F010C424800000000FB
+:101BB000010C424C00000000010C425000000000EB
+:101BC000010C425400000000010C425800000000CB
+:101BD000010C425C00000000010C426000000000AB
+:101BE000010C426400000000010C4268000000008B
+:101BF000010C426C00000000010C4270000000006B
+:101C0000010C427400000000010C4278000000004A
+:101C1000010C427C00000000010C4280000000002A
+:101C2000020C44C0000000010C0C4000000003E85E
+:101C30000A0C4000000000010B0C40000000000AEC
+:101C4000060D400000000A00020D004400000032B2
+:101C5000020D008C02150020020D009002150020DC
+:101C6000020D009408100000020D009800000033DF
+:101C7000020D009C00000002020D00A00000000008
+:101C8000020D00A400000005020D00A800000005E0
+:101C9000060D00AC00000002020D00B400000002BE
+:101CA000020D00B800000003020D00BC000000029D
+:101CB000020D00C000000001020D00C8000000027B
+:101CC000020D00CC00000002020D015C00000001CA
+:101CD000020D016400000001020D01680000000215
+:101CE000020D020400000001020D020C00000020A1
+:101CF000020D021000000040020D0214000000401E
+:101D0000020D022000000003020D02240000001852
+:101D1000060D028000000012040D030000180343AA
+:101D2000060D03600000000C020D004C00000001D5
+:101D3000020D005000000002020D005400000000DF
+:101D4000020D005800000008060D005C00000004B1
+:101D5000020D00C400000004020D0114000000097F
+:101D6000020D011800000029020D011C0000000AEC
+:101D7000020D01200000002A020D012400000000D5
+:101D8000020D012800000020020D012C00000000BF
+:101D9000020D013000000020020D0134000000009F
+:101DA000020D013800000020020D013C000000007F
+:101DB000020D014000000020020D0144000000005F
+:101DC000020D014800000020020D00040000000187
+:101DD000020D000800000001020D000C00000001CF
+:101DE000020D001000000001020D001400000001AF
+:101DF000020D001800000001020D001C000000018F
+:101E0000020D002000000001020D0024000000016E
+:101E1000020D002800000001020D002C000000014E
+:101E2000020D003000000001020D0034000000012E
+:101E3000020D003800000001020D003C000000010E
+:101E4000060E200000000800020E004C00000032C8
+:101E5000020E009402150020020E009802150020C8
+:101E6000020E009C00000030020E00A008100000CE
+:101E7000020E00A400000033020E00A80000003093
+:101E8000020E00AC00000031020E00B000000002A3
+:101E9000020E00B400000004020E00B800000000B2
+:101EA000020E00BC00000002020E00C00000000292
+:101EB000020E00C400000000020E00C80000000274
+:101EC000020E00CC00000007020E00D0000000024D
+:101ED000020E00D400000002020E00D80000000133
+:101EE000020E014400000001020E014C000000013E
+:101EF000020E015000000002020E02040000000168
+:101F0000020E020C00000040020E02100000004011
+:101F1000020E021C00000004020E0220000000203D
+:101F2000020E02240000000E020E02280000001B18
+:101F3000060E030000000012040E0280001B035B6B
+:101F4000060E02EC00000005020E00540000000C1A
+:101F5000020E00580000000C020E005C00000000A1
+:101F6000020E006000000010060E00640000000475
+:101F7000020E00DC00000003020E01100000000F42
+:101F8000020E01140000002F020E011800000000D4
+:101F9000020E011C00000020020E000400000001DF
+:101FA000020E000800000001020E000C00000001FB
+:101FB000020E001000000001020E001400000001DB
+:101FC000020E001800000001020E001C00000001BB
+:101FD000020E002000000001020E0024000000019B
+:101FE000020E002800000001020E002C000000017B
+:101FF000020E003000000001020E0034000000015B
+:10200000020E003800000001020E003C000000013A
+:10201000020E004000000001020E0044000000011A
+:102020000730040000AF0000083007680013037693
+:10203000073400003305000007348000327F0CC2F3
+:10204000073500001A951962083539E058C403783D
+:10205000013000000000000001300004000000001A
+:1020600001300008000000000130000C00000000FA
+:1020700001300010000000000130001400000000DA
+:1020800002300020000000010230002400000002A5
+:1020900002300028000000030230002C0000000085
+:1020A0000230003000000004023000340000000163
+:1020B00002300038000000000230003C0000000147
+:1020C0000230004000000004023000440000000024
+:1020D00002300048000000010230004C0000000304
+:1020E00002300050000000000230005400000001E7
+:1020F00002300058000000040230005C00000000C4
+:1021000002300060000000010230006400000003A3
+:1021100002300068000000000230006C0000000186
+:102120000230007000000004023000740000000063
+:1021300002300078000000040230007C0000000340
+:102140000630008000000002023000A400003FFFC3
+:10215000023000A8000003FF02300224000000004B
+:1021600002300234000000000230024C0000000087
+:10217000023002E40000FFFF0630200000000800EB
+:1021800002338BC000000001023380000000001AFF
+:10219000023380400000004E0233808000000010B7
+:1021A000023380C0000000200C3383000007A12010
+:1021B0000A338300000001380B33830000001388CA
+:1021C0000A338340000000000C338340000001F418
+:1021D0000B33834000000005023383800007A120F9
+:1021E000023383C0000001F406322A88000000C2D6
+:1021F00006322008000000C806322000000000025D
+:10220000063223E80000004004322E580004037A0E
+:10221000063250A000000004063250B80000000250
+:102220000632508000000006043250980002037EFF
+:10223000063250000000002006323000000004008A
+:1022400006321C0000000004043218300002038033
+:10225000063224E8000000B402322DB00000000075
+:1022600006324000000000B40632300000000020BA
+:10227000063231000000002006323200000000204B
+:102280000632330000000020063234000000002037
+:102290000632350000000020063236000000002023
+:1022A000063237000000002006323800000000200F
+:1022B000063239000000002006323A0000000020FB
+:1022C00006323B000000002006323C0000000020E7
+:1022D00006323D000000002006323E0000000020D3
+:1022E00006323F000000002006321C1000000002F1
+:1022F000063245A000000024063227B8000000B4D2
+:1023000002322DB400000000063242D0000000B4BA
+:1023100006323080000000200632318000000020AC
+:102320000632328000000020063233800000002098
+:102330000632348000000020063235800000002084
+:102340000632368000000020063237800000002070
+:10235000063238800000002006323980000000205C
+:1023600006323A800000002006323B800000002048
+:1023700006323C800000002006323D800000002034
+:1023800006323E800000002006323F800000002020
+:1023900006321C20000000020632463000000024F5
+:1023A0000720040000870000082007800010038237
+:1023B000072400003165000007248000081D0C5A26
+:1023C00008248EB06C9003840120000000000000FF
+:1023D00001200004000000000120000800000000AF
+:1023E0000120000C0000000001200010000000008F
+:1023F0000120001400000000022000200000000165
+:102400000220002400000002022000280000000337
+:102410000220002C00000000022000300000000418
+:1024200002200034000000010220003800000000FB
+:102430000220003C000000010220004000000004D7
+:1024400002200044000000000220004800000001BB
+:102450000220004C00000003022000500000000099
+:102460000220005400000001022000580000000477
+:102470000220005C0000000002200060000000015B
+:102480000220006400000003022000680000000039
+:102490000220006C00000001022000700000000417
+:1024A00002200074000000000220007800000004F8
+:1024B0000220007C000000030620008000000002D3
+:1024C000022000A400003FFF022000A8000003FF3C
+:1024D000022002240000000002200234000000005C
+:1024E0000220024C00000000022002E40000FFFF76
+:1024F000062020000000080002238BC0000000011D
+:10250000022380000000001002238040000000121F
+:102510000223808000000030022380C00000000EF3
+:102520000C2383000007A1200A2383000000013848
+:102530000B238300000013880A238340000000005F
+:102540000C238340000001F40B23834000000005AE
+:10255000022383800007A120022383C0000001F42E
+:10256000062250000000004206222008000000C899
+:10257000062220000000000206224000000000C6E3
+:1025800004224318000503860622432C0000000B9A
+:10259000042243580005038B0622436C0000000B05
+:1025A0000422439800050390062243AC0000000B70
+:1025B000042243D800050395062243EC0000000BDB
+:1025C000042244180005039A0622442C0000000B44
+:1025D000042244580005039F0622446C0000000BAF
+:1025E00004224498000503A4062244AC0000000B1A
+:1025F000042244D8000503A9062244EC0000000B85
+:1026000004224518000503AE0622452C0000000BED
+:1026100004224558000503B30622456C0000000B58
+:1026200004224598000503B8062245AC0000000BC3
+:10263000042245D8000503BD062245EC0000000B2E
+:1026400004224618000503C20622462C0000000B97
+:1026500004224658000503C70622466C0000000B02
+:1026600004224698000503CC062246AC0000000B6D
+:10267000042246D8000503D1062246EC0000000BD8
+:1026800004224718000503D60622472C0000000B41
+:1026900004224758000503DB0622476C0000000BAC
+:1026A00004224798000503E0062247AC0000000B17
+:1026B000042247D8000503E5062247EC0000000B82
+:1026C00004224818000503EA0622482C0000000BEB
+:1026D00004224858000503EF0622486C0000000B56
+:1026E00004224898000503F4062248AC0000000BC1
+:1026F000042248D8000503F9062248EC0000000B2C
+:1027000004224918000503FE0622492C0000000B94
+:1027100004224958000504030622496C0000000BFE
+:102720000422499800050408062249AC0000000B69
+:10273000042249D80005040D062249EC0000000BD4
+:1027400004224A180005041206224A2C0000000B3D
+:1027500004224A580005041706224A6C0000000BA8
+:1027600004224A980005041C06224AAC0000000B13
+:1027700004224AD80005042106224AEC0000000584
+:1027800006224B000000001704224B5C00010426C7
+:1027900006224B600000000304224B6C000104275A
+:1027A000062238000000004006223000000002002F
+:1027B000042251C00004042806221000000000C0BA
+:1027C000062215C00000024004221EC80008042C86
+:1027D0000622390000000008022251180000000003
+:1027E000062251D00000000606221300000000025D
+:1027F00006221410000000300622392000000008D4
+:102800000222511C00000000062251E800000006D0
+:102810000622130800000002062214D00000003037
+:102820000216100000000028021700080000000235
+:102830000217002C000000030217003C00000004F7
+:1028400002170044000000000217004800000002C8
+:102850000217004C0000009002170050000000908A
+:102860000217005400800090021700580810000062
+:10287000021700600000008A021700640000008058
+:1028800002170068000000810217006C0000008041
+:10289000021700700000000602170078000007D041
+:1028A0000217007C0000076C02170038007C10043F
+:1028B000021700040000000F06164024000000026A
+:1028C000021640700000001C0216420800000001C1
+:1028D0000216421000000001021642200000000112
+:1028E00002164228000000010216423000000001DA
+:1028F000021642380000000102164260000000018A
+:102900000C16401C0003D0900A16401C0000009CCE
+:102910000B16401C000009C40216403000000008DD
+:10292000021640340000000C02164038000000106F
+:102930000216404400000020021640000000000182
+:10294000021640D8000000010216400800000001F5
+:102950000216400C000000010216401000000001A9
+:10296000021642400000000002164248000000002B
+:1029700006164270000000020216425000000000DD
+:1029800002164258000000000616428000000002B5
+:1029900002166008000006140216600C0000060013
+:1029A00002166010000006040216601C0000FFFF03
+:1029B000021660200000FFFF021660240000FFFFE7
+:1029C000021660280000FFFF021660380000002099
+:1029D0000216603C00000020061660400000000265
+:1029E00002166048000000230216604C000000241C
+:1029F00002166050000000250216605400000026F8
+:102A000002166058000000270216605C00000029D2
+:102A1000021660600000002A021660640000002BAD
+:102A2000021660680000002C0216606C0000002D89
+:102A30000616607000000012021660B80000000167
+:102A4000021660BC00000001061660C00000003ED7
+:102A5000021661B800000001061661BC0000001FEC
+:102A60000216623807FFFFFF0216623C0000003FBB
+:102A70000216624007FFFFFF021662440000000FCB
+:102A800001166248000000000116624C00000000C0
+:102A900001166250000000000116625400000000A0
+:102AA00001166258000000000116625C0000000080
+:102AB0000116626000000000011662640000000060
+:102AC00001166268000000000116626C0000000040
+:102AD0000116627000000000011662740000000020
+:102AE00001166278000000000116627C0000000000
+:102AF000021664BC000000010C166000000003E830
+:102B00000A166000000000010B1660000000000AB9
+:102B100002168040000000060216804400000005F6
+:102B2000021680480000000A0216804C00000005D2
+:102B30000216805400000002021680CC000000043F
+:102B4000021680D000000004021680D400000004A9
+:102B5000021680D800000004021680DC0000000489
+:102B6000021680E000000004021680E40000000469
+:102B7000021680E800000004021688040000000429
+:102B8000021680300000007C021680340000003DF8
+:102B9000021680380000003F0216803C0000009CB6
+:102BA000021680F000000007061680F40000000501
+:102BB0000216880C010101010216810800000000C4
+:102BC0000216810C000000040216811000000004AF
+:102BD0000216811400000002021688100801200469
+:102BE00002168118000000050216811C0000000575
+:102BF0000216812000000005021681240000000555
+:102C00000216882C200810010216812800000008F6
+:102C10000216812C00000006021681300000000719
+:102C200002168134000000000216883001010120E4
+:102C300006168138000000040216883401010101E3
+:102C400006168148000000040216883801010101BF
+:102C500006168158000000040216883C010101019B
+:102C6000061681680000000302168174000000014E
+:102C7000021688400101010102168178000000015E
+:102C80000216817C00000001021681800000000114
+:102C9000021681840000000102168844010101012E
+:102CA00002168188000000010216818C00000004D9
+:102CB00002168190000000040216819400000002B8
+:102CC00002168848080120040216819800000005B9
+:102CD0000216819C00000005021681A0000000057C
+:102CE000021681A4000000050216881420081001B5
+:102CF000021681A800000008021681AC0000000640
+:102D0000021681B000000007021681B40000000125
+:102D10000216881801010120021681B80000000186
+:102D2000021681BC00000001021681C000000001F3
+:102D3000021681C4000000010216881C0101010175
+:102D4000021681C800000001021681CC00000001BB
+:102D5000021681D000000001021681D4000000019B
+:102D60000216882001010101021681D8000000012D
+:102D7000021681DC00000001021681E00000000163
+:102D8000021681E4000000010216882401010101FD
+:102D9000021681E800000001021681EC000000012B
+:102DA000021681F0000000010216882801010101CD
+:102DB00002168240FFFF003F061682440000000218
+:102DC0000216824CFFFF003F0216825000000100F5
+:102DD000021682540000010006168258000000020C
+:102DE00002168260000000C002168264000000C06B
+:102DF0000216826800001E000216826C00001E008F
+:102E0000021682700000400002168274000040002A
+:102E100002168278000080000216827C000080008A
+:102E2000021682800000200002168284000020002A
+:102E30000616828800000007021682A40000000126
+:102E4000061682A80000000A021681F400000C0891
+:102E5000021681F800000040021681FC000001000B
+:102E600002168200000000200216820400000017F3
+:102E700002168208000000800216820C0000020088
+:102E8000021682100000000002168218FFFF01FFE8
+:102E900002168214FFFF01FF0216823C000000139D
+:102EA000021680900000013F021680600000014081
+:102EB00002168064000001400616806800000002CF
+:102EC00002168070000000C0061680740000000723
+:102ED0000216809C00000048021680A000000048F6
+:102EE000061680A400000002021680AC0000004814
+:102EF000061680B00000000702168238000080002D
+:102F000002168234000025E40216809400007FFF40
+:102F100002168220000000070216821C0000000733
+:102F2000021682280000000002168224FFFFFFFF25
+:102F300002168230000000000216822CFFFFFFFF05
+:102F4000021680EC000000FF0214000000000001E7
+:102F50000214000C000000010214004000000001F7
+:102F60000214004400007FFF0214000C0000000067
+:102F700002140000000000000214006C00000000B9
+:102F800002140004000000010214003000000001DF
+:102F900002140004000000000214005C00000000A5
+:102FA00002140008000000010214003400000001B7
+:102FB000021400080000000002140060000000007D
+:102FC00006028000000020000202005800000032CB
+:102FD000020200A003150020020200A40315002035
+:102FE000020200A801000030020200AC081000003C
+:102FF000020200B000000033020200B40000003002
+:10300000020200B800000031020200BC0000000310
+:10301000020200C000000006020200C4000000031B
+:10302000020200C800000003020200CC00000002FF
+:10303000020200D000000000020200D400000002E2
+:10304000020200DC00000000020200E000000006B6
+:10305000020200E400000004020200E80000000296
+:10306000020200EC00000002020200F00000000179
+:10307000020200FC00000006020201200000000025
+:103080000202013400000002020201B0000000014F
+:103090000202020C00000001020202140000000102
+:1030A00002020218000000020202040400000001F3
+:1030B0000202040C00000040020204100000004064
+:1030C0000202041C00000004020204200000002090
+:1030D0000202042400000002020204280000001F73
+:1030E00006020500000000120402048000200434DF
+:1030F000020200600000000F0202006400000007EE
+:1031000002020068000000000202006C0000000ED5
+:103110000602007000000004020200F40000000437
+:103120000202000400000001020200080000000189
+:103130000202000C00000001020200100000000169
+:103140000202001400000001020200180000000149
+:103150000202001C00000001020200200000000129
+:103160000202002400000001020200280000000109
+:103170000202002C000000010202003000000001E9
+:1031800002020034000000010202003800000001C9
+:103190000202003C000000010202004000000001A9
+:1031A0000202004400000001020200480000000189
+:1031B0000202004C00000001020200500000000169
+:1031C00002020108000000C802020118000000020B
+:1031D000020201C400000000020201CC0000000055
+:1031E000020201D400000002020201DC0000000221
+:1031F000020201E4000000FF020201EC000000FFF7
+:103200000202010C000000C80202011C00000002C2
+:10321000020201C800000000020201D0000000000C
+:10322000020201D800000002020201E000000002D8
+:10323000020201E8000000FF020201F0000000FFAE
+:1032400007280400008E00000828076800130454B3
+:10325000072C000033C80000072C800038050CF351
+:10326000072D000038B61AF5072D800007762923B0
+:10327000082D8CB04E6A04560128000000000000A2
+:1032800001280004000000000128000800000000E0
+:103290000128000C000000000128001000000000C0
+:1032A0000128001400000000022800200000000196
+:1032B0000228002400000002022800280000000369
+:1032C0000228002C0000000002280030000000044A
+:1032D000022800340000000102280038000000002D
+:1032E0000228003C00000001022800400000000409
+:1032F00002280044000000000228004800000001ED
+:103300000228004C000000030228005000000000CA
+:1033100002280054000000010228005800000004A8
+:103320000228005C0000000002280060000000018C
+:10333000022800640000000302280068000000006A
+:103340000228006C00000001022800700000000448
+:103350000228007400000000022800780000000429
+:103360000228007C00000003062800800000000204
+:10337000022800A400003FFF022800A8000003FF6D
+:10338000022802240000000002280234000000008D
+:103390000228024C00000000022802E40000FFFFA7
+:1033A0000628200000000800022B8BC0000000014E
+:1033B000022B800000000000022B8040000000185B
+:1033C000022B80800000000C022B80C000000066F1
+:1033D0000C2B83000007A1200A2B8300000001387A
+:1033E0000B2B8300000013880A2B83400000000091
+:1033F0000C2B8340000001F40B2B834000000005E0
+:10340000022B83800007A120022B83C0000001F45F
+:10341000062A3D4800000004042A3D5800020458D2
+:10342000062A3D6000000006062A30000000004821
+:10343000062A2008000000C8062A2000000000021A
+:10344000062A31280000008E062A33680000000397
+:10345000042A33740001045A062A3A780000000254
+:10346000042A3A800002045B042A3A700002045DD8
+:10347000042A3E280002045F042A3EB000040461CE
+:10348000042A250000020465062A25080000010020
+:10349000062A297000000004042A29600004046739
+:1034A000042A2F480002046B062A3378000000D853
+:1034B000022A3A3800000000062A3A88000000324A
+:1034C000042A3D880010046D062A502000000002E6
+:1034D000062A503000000002062A500000000002B8
+:1034E000062A501000000002022A50B80000000115
+:1034F000062A50480000000E042A3D780002047D90
+:10350000062A3C1800000026022A50400000000055
+:10351000062A36D8000000D8022A3A3C00000000F3
+:10352000062A3B5000000032042A3DC80010047FE8
+:10353000062A502800000002062A50380000000227
+:10354000062A500800000002062A50180000000257
+:10355000022A50BC00000001062A50800000000E24
+:10356000042A3D800002048F062A3CB00000002699
+:10357000022A504400000000021010080000000160
+:103580000210101000000264021010000003D000AE
+:10359000021010040000003D091018000200049100
+:1035A00009101100001006910610114000000008DB
+:1035B00009101160000806A1061011800000000229
+:1035C00009101188000606A9061011A000000018B5
+:1035D000021010100000000006102400000000E09F
+:1035E0000210201C0000000002102020000000013A
+:1035F000021020C0000000010210200400000001A1
+:10360000021020080000000109103C00000506AF70
+:1036100009103C20000506B409103800000506B961
+:1036200002104028000000100210404400003FFF3C
+:103630000210405800280000021040840084924A82
+:1036400006104C000000010002104058000000006D
+:103650000610806800000004021080000000108046
+:1036600006108028000000020210803800000010C0
+:10367000021080400000FFFF021080440000FFFFA6
+:1036800002108050000000000210810000000000C5
+:10369000061081200000000202108008000002B520
+:1036A0000210801000000000061082000000004A96
+:1036B000021081080001FFFF061081400000000297
+:1036C0000210800000001A80061090000000002404
+:1036D000061091200000004A061093700000004A76
+:1036E000061095C00000004A0210800400001080FF
+:1036F00006108030000000020210803C0000001024
+:10370000021080480000FFFF0210804C0000FFFF05
+:10371000021080540000000002108104000000002C
+:1037200006108128000000020210800C000002B583
+:103730000210801400000000061084000000004AFF
+:103740000210810C0001FFFF0610814800000002FA
+:103750000210800400001A800610909000000024DF
+:10376000061092480000004A061094980000004A93
+:10377000061096E80000004A0212049000E383401D
+:103780000212051400003C10021205200000000285
+:1037900002120494FFFFFFFF02120498FFFFFFFFD5
+:1037A0000212049CFFFFFFFF021204A0FFFFFFFFB5
+:1037B000021204A4FFFFFFFF021204A8FFFFFFFF95
+:1037C000021204ACFFFFFFFF021204B0FFFFFFFF75
+:1037D000021204B8FFFFFFFF021204BCFFFFFFFF4D
+:1037E000021204C0FFFFFFFF021204C4FFFFFFFF2D
+:1037F000021204C8FFFFFFFF021204CCFFFFFFFF0D
+:10380000021204D0FFFFFFFF021204DCFFFFFFFFE4
+:10381000021204E0FFFFFFFF021204E4FFFFFFFFBC
+:10382000021204E8FFFFFFFF021204ECFFFFFFFF9C
+:10383000021204F0FFFFFFFF021204F4FFFFFFFF7C
+:10384000021204F8FFFFFFFF021204FCFFFFFFFF5C
+:1038500002120500FFFFFFFF02120504FFFFFFFF3A
+:1038600002120508FFFFFFFF0212050CFFFFFFFF1A
+:1038700002120510FFFFFFFF021204D4FFFF3330D6
+:10388000021204D8FFFF3340021204B4F0003000EB
+:1038900002120390000000080212039C00000008BE
+:1038A000061203A000000002021203BC0000000484
+:1038B000021203C400000004021203D00000000042
+:1038C000021203DC000000000212036C0000000181
+:1038D000021203680000003F021201BC0000004019
+:1038E000021201C000001808021201C400000803FF
+:1038F000021201C800000803021201CC00000040BF
+:10390000021201D000000003021201D400000803DB
+:10391000021201D800000803021201DC00000803B3
+:10392000021201E000010003021201E4000008039A
+:10393000021201E800000803021201EC000000037B
+:10394000021201F000000003021201F40000000363
+:10395000021201F800000003021201FC0000000343
+:103960000212020000000003021202040000000321
+:1039700002120208000000030212020C0000000301
+:1039800002120210000000030212021400000003E1
+:1039900002120218000000030212021C00000003C1
+:1039A00002120220000000030212022400000003A1
+:1039B00002120228000024030212022C0000002F31
+:1039C0000212023000000009021202340000001945
+:1039D00002120238000001840212023C000001833E
+:1039E0000212024000000306021202440000001905
+:1039F00002120248000000060212024C00000306F8
+:103A000002120250000003060212025400000306D4
+:103A10000212025800000C860212025C000003062B
+:103A20000212026000000306021202640000000697
+:103A300002120268000000060212026C000000067A
+:103A4000021202700000000602120274000000065A
+:103A500002120278000000060212027C000000063A
+:103A6000021202800000000602120284000000061A
+:103A700002120288000000060212028C00000006FA
+:103A800002120290000000060212029400000006DA
+:103A900002120298000000060212029C00000006BA
+:103AA000021202A000000306021202A4000000138A
+:103AB000021202A800000006021202B00000100468
+:103AC000021202B400001004021203240010644029
+:103AD0000212032800106440021201B0000000012D
+:103AE0000600A000000000160200A06CBF5C0000F1
+:103AF0000200A070FFF51FEF0200A0740000FFFF9E
+:103B00000200A078F00003E00200A07C00000000AA
+:103B10000200A0800000A0000600A08400000005B4
+:103B20000200A0980FE000000600A09C0000001416
+:103B30000200A0EC555400000200A0F05555555568
+:103B40000200A0F4000055550200A0F8F0000000AB
+:103B50000200A0FC555400000200A1005555555527
+:103B60000200A104000055550200A108F000000069
+:103B70000600A22C000000040200A0600000030761
+:103B80000200A10CBF5C00000200A110FFF51FEFB6
+:103B90000200A1140000FFFF0200A118F00003E0E2
+:103BA0000200A11C000000000200A1200000A000F3
+:103BB0000600A124000000050200A1380FE000006B
+:103BC0000600A13C000000140200A18C5554000026
+:103BD0000200A190555555550200A194000055557D
+:103BE0000200A198F00000000200A19C55540000C2
+:103BF0000200A1A0555555550200A1A4000055553D
+:103C00000200A1A8F00000000600A23C0000000491
+:103C10000200A06400000307000000000000000094
+:103C20000000002E00000000000000000000000066
+:103C30000000000000000000000000000000000084
+:103C40000000000000000000000000000000000074
+:103C50000000000000000000000000000000000064
+:103C60000000000000000000000000000000000054
+:103C70000000000000000000002E004D00000000C9
+:103C80000000000000000000000000000000000034
+:103C90000000000000000000000000000000000024
+:103CA00000000000004D008B00000000000000003C
+:103CB0000000000000000000000000000000000004
+:103CC00000000000000000000000000000000000F4
+:103CD000008B009000900094009400980000000079
+:103CE00000000000000000000000000000000000D4
+:103CF000000000000000000000000000009802DE4C
+:103D000002DE02E802E802F200000000000000000B
+:103D100000000000000000000000000000000000A3
+:103D20000000000000000000000000000000000093
+:103D30000000000000000000000000000000000083
+:103D40000000000000000000000000000000000073
+:103D50000000000000000000000000000000000063
+:103D60000000000000000000000000000000000053
+:103D70000000000000000000000000000000000043
+:103D80000000000000000000000000000000000033
+:103D90000000000000000000000000000000000023
+:103DA0000000000000000000000000000000000013
+:103DB0000000000000000000000000000000000003
+:103DC00000000000000000000000000000000000F3
+:103DD000000000000000000002F202FA00000000F3
+:103DE00000000000000000000000000000000000D3
+:103DF00000000000000000000000000000000000C3
+:103E000000000000000000000000000000000000B2
+:103E100000000000000000000000000000000000A2
+:103E20000000000000000000000000000000000092
+:103E300002FA02FF02FF030A030A03150000000052
+:103E40000000000000000000000000000000000072
+:103E50000000000000000000000000000000000062
+:103E60000000000000000000000000000000000052
+:103E70000000000000000000000000000000000042
+:103E80000000000000000000031503160000000001
+:103E90000000000000000000000000000000000022
+:103EA0000000000000000000000000000000000012
+:103EB000000000000316035700000000000000008F
+:103EC00000000000000000000000000000000000F2
+:103ED00000000000000000000000000000000000E2
+:103EE0000357037B000000000000000000000000FA
+:103EF00000000000000000000000000000000000C2
+:103F0000000000000000000000000000037B03BB75
+:103F100000000000000000000000000000000000A1
+:103F20000000000000000000000000000000000091
+:103F3000000000000000000003BB03F700000000C9
+:103F40000000000000000000000000000000000071
+:103F50000000000000000000000000000000000061
+:103F60000000000003F7043D043D045204520467BE
+:103F70000000000000000000000000000000000041
+:103F80000000000000000000000000000000000031
+:103F9000046704ED04ED04F204F204F700000000ED
+:103FA0000000000000000000000000000000000011
+:103FB00000000000000000000000000004F704F80A
+:103FC00000000000000000000000000000000000F1
+:103FD00000000000000000000000000000000000E1
+:103FE000000000000000000004F8050A00000000C6
+:103FF00000000000000000000000000000000000C1
+:1040000000000000000000000000000000000000B0
+:1040100000000000050A051F051F052205220525D1
+:104020000000000000000000000000000000000090
+:104030000000000000000000000000000000000080
+:1040400005250555000000000000000000000000EC
+:104050000000000000000000000000000000000060
+:10406000000000000000000000000000055505DC15
+:104070000000000000000000000000000000000040
+:104080000000000000000000000000000000000030
+:10409000000000000000000005DC05E305E305E783
+:1040A00005E705EB00000000000000000000000034
+:1040B0000000000000000000000000000000000000
+:1040C0000000000005EB062B062B06330633063BEB
+:1040D00000000000000000000000000000000000E0
+:1040E00000000000000000000000000000000000D0
+:1040F000063B068806880695069506A20000000085
+:1041000000000000000000000000000000000000AF
+:1041100000000000000000000000000006A206AE43
+:10412000000000000000000000000000000000008F
+:10413000000000000000000000000000000000007F
+:10414000000000000000000006AE06B40000000001
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:104170000000000006B406B70000000000000000C8
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A00006B706BD0000000000000000000000008F
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000006BD06BE68
+:1041D00006BE06D006D006E2000000000000000087
+:1041E00000000000000000000000000000000000CF
+:1041F000000000000000000006E2074F0000000081
+:1042000000000000000000000000000000000000AE
+:10421000000000000000000000000000000000009E
+:1042200000000000074F0750075007630763077639
+:10423000000000000000000000000000000000007E
+:10424000000000000000000000000000000000006E
+:10425000000000000000000000000000000000005E
+:10426000000000000000000000000000000000004E
+:10427000000000000000000000000000000000003E
+:10428000000000000000000000000000000000002E
+:10429000000000000000000000000000000000001E
+:1042A000000000000000000000000000000000000E
+:1042B00000000000000000000000000000000000FE
+:1042C00000000000000000000000000000000000EE
+:1042D00000000000000000000000000000000000DE
+:1042E00000000000000000000000000000000000CE
+:1042F00000000000000000000000000000000000BE
+:1043000000000000000000000000000000000000AD
+:10431000000000000000000000000000000000009D
+:10432000000000000000000000000000000000008D
+:1043300000010000000204C00003098000040E40D8
+:1043400000051300000617C000071C80000821406C
+:1043500000092600000A2AC0000B2F80000C344000
+:10436000000D3900000E3DC0000F42800010474094
+:1043700000114C00001250C00013558000145A4028
+:1043800000155F00001663C00017688000186D40BC
+:1043900000197200001A76C0001B7B80001C804050
+:1043A000001D8500001E89C0001F8E800000934004
+:1043B00000002000000040000000600000008000BD
+:1043C0000000A0000000C0000000E00000010000AC
+:1043D0000001200000014000000160000001800099
+:1043E0000001A0000001C0000001E0000002000088
+:1043F0000002200000024000000260000002800075
+:104400000002A0000002C0000002E0000003000063
+:104410000003200000034000000360000003800050
+:104420000003A0000003C0000003E000000400003F
+:10443000000420000004400000046000000480002C
+:104440000004A0000004C0000004E000000500001B
+:104450000005200000054000000560000005800008
+:104460000005A0000005C0000005E00000060000F7
+:1044700000062000000640000006600000068000E4
+:104480000006A0000006C0000006E00000070000D3
+:1044900000072000000740000007600000078000C0
+:1044A0000007A0000007C0000007E00000080000AF
+:1044B000000820000008400000086000000880009C
+:1044C0000008A0000008C0000008E000000900008B
+:1044D0000009200000094000000960000009800078
+:1044E0000009A0000009C0000009E000000A000067
+:1044F000000A2000000A4000000A6000000A800054
+:10450000000AA000000AC000000AE000000B000042
+:10451000000B2000000B4000000B6000000B80002F
+:10452000000BA000000BC000000BE000000C00001E
+:10453000000C2000000C4000000C6000000C80000B
+:10454000000CA000000CC000000CE000000D0000FA
+:10455000000D2000000D4000000D6000000D8000E7
+:10456000000DA000000DC000000DE000000E0000D6
+:10457000000E2000000E4000000E6000000E8000C3
+:10458000000EA000000EC000000EE000000F0000B2
+:10459000000F2000000F4000000F6000000F80009F
+:1045A000000FA000000FC000000FE000001000008E
+:1045B000001020000010400000106000001080007B
+:1045C0000010A0000010C0000010E000001100006A
+:1045D0000011200000114000001160000011800057
+:1045E0000011A0000011C0000011E0000012000046
+:1045F0000012200000124000001260000012800033
+:104600000012A0000012C0000012E0000013000021
+:10461000001320000013400000136000001380000E
+:104620000013A0000013C0000013E00000140000FD
+:1046300000142000001440000014600000148000EA
+:104640000014A0000014C0000014E00000150000D9
+:1046500000152000001540000015600000158000C6
+:104660000015A0000015C0000015E00000160000B5
+:1046700000162000001640000016600000168000A2
+:104680000016A0000016C0000016E0000017000091
+:10469000001720000017400000176000001780007E
+:1046A0000017A0000017C0000017E000001800006D
+:1046B000001820000018400000186000001880005A
+:1046C0000018A0000018C0000018E0000019000049
+:1046D0000019200000194000001960000019800036
+:1046E0000019A0000019C0000019E000001A000025
+:1046F000001A2000001A4000001A6000001A800012
+:10470000001AA000001AC000001AE000001B000000
+:10471000001B2000001B4000001B6000001B8000ED
+:10472000001BA000001BC000001BE000001C0000DC
+:10473000001C2000001C4000001C6000001C8000C9
+:10474000001CA000001CC000001CE000001D0000B8
+:10475000001D2000001D4000001D6000001D8000A5
+:10476000001DA000001DC000001DE000001E000094
+:10477000001E2000001E4000001E6000001E800081
+:10478000001EA000001EC000001EE000001F000070
+:10479000001F2000001F4000001F6000001F80005D
+:1047A000001FA000001FC000001FE000002000004C
+:1047B0000020200000204000002060000020800039
+:1047C0000020A0000020C0000020E0000021000028
+:1047D0000021200000214000002160000021800015
+:1047E0000021A0000021C0000021E0000022000004
+:1047F00000222000002240000022600000228000F1
+:104800000022A0000022C0000022E00000230000DF
+:1048100000232000002340000023600000238000CC
+:104820000023A0000023C0000023E00000240000BB
+:1048300000242000002440000024600000248000A8
+:104840000024A0000024C0000024E0000025000097
+:104850000025200000254000002560000025800084
+:104860000025A0000025C0000025E0000026000073
+:104870000026200000264000002660000026800060
+:104880000026A0000026C0000026E000002700004F
+:10489000002720000027400000276000002780003C
+:1048A0000027A0000027C0000027E000002800002B
+:1048B0000028200000284000002860000028800018
+:1048C0000028A0000028C0000028E0000029000007
+:1048D00000292000002940000029600000298000F4
+:1048E0000029A0000029C0000029E000002A0000E3
+:1048F000002A2000002A4000002A6000002A8000D0
+:10490000002AA000002AC000002AE000002B0000BE
+:10491000002B2000002B4000002B6000002B8000AB
+:10492000002BA000002BC000002BE000002C00009A
+:10493000002C2000002C4000002C6000002C800087
+:10494000002CA000002CC000002CE000002D000076
+:10495000002D2000002D4000002D6000002D800063
+:10496000002DA000002DC000002DE000002E000052
+:10497000002E2000002E4000002E6000002E80003F
+:10498000002EA000002EC000002EE000002F00002E
+:10499000002F2000002F4000002F6000002F80001B
+:1049A000002FA000002FC000002FE000003000000A
+:1049B00000302000003040000030600000308000F7
+:1049C0000030A0000030C0000030E00000310000E6
+:1049D00000312000003140000031600000318000D3
+:1049E0000031A0000031C0000031E00000320000C2
+:1049F00000322000003240000032600000328000AF
+:104A00000032A0000032C0000032E000003300009D
+:104A1000003320000033400000336000003380008A
+:104A20000033A0000033C0000033E0000034000079
+:104A30000034200000344000003460000034800066
+:104A40000034A0000034C0000034E0000035000055
+:104A50000035200000354000003560000035800042
+:104A60000035A0000035C0000035E0000036000031
+:104A7000003620000036400000366000003680001E
+:104A80000036A0000036C0000036E000003700000D
+:104A900000372000003740000037600000378000FA
+:104AA0000037A0000037C0000037E00000380000E9
+:104AB00000382000003840000038600000388000D6
+:104AC0000038A0000038C0000038E00000390000C5
+:104AD00000392000003940000039600000398000B2
+:104AE0000039A0000039C0000039E000003A0000A1
+:104AF000003A2000003A4000003A6000003A80008E
+:104B0000003AA000003AC000003AE000003B00007C
+:104B1000003B2000003B4000003B6000003B800069
+:104B2000003BA000003BC000003BE000003C000058
+:104B3000003C2000003C4000003C6000003C800045
+:104B4000003CA000003CC000003CE000003D000034
+:104B5000003D2000003D4000003D6000003D800021
+:104B6000003DA000003DC000003DE000003E000010
+:104B7000003E2000003E4000003E6000003E8000FD
+:104B8000003EA000003EC000003EE000003F0000EC
+:104B9000003F2000003F4000003F6000003F8000D9
+:104BA000003FA000003FC000003FE000003FE001E8
+:104BB00000000000000001FF0000020000007FF87C
+:104BC00000007FF80000016A0000150000000001ED
+:104BD0000000FF00000000000000FF0000000000D7
+:104BE00000000000140AFF000000000100000000A7
+:104BF00000201001000000000100860000000100FC
+:104C00000000860200008604000086060000860878
+:104C10000000860A0000860C0000860E0000861048
+:104C20000000861200008614000086160000861818
+:104C30000000861A0000861C0000861E00008620E8
+:104C400000008622000086240000862600008628B8
+:104C50000000862A0000862C0000862E0000863088
+:104C60000000863200008634000086360000863858
+:104C70000000863A0000863C0000863E0000864028
+:104C800000008642000086440000864600008648F8
+:104C90000000864A0000864C0000864E00008650C8
+:104CA0000000865200008654000086560000865898
+:104CB0000000865A0000865C0000865E0000866068
+:104CC0000000866200008664000086660000866838
+:104CD0000000866A0000866C0000866E0000867008
+:104CE00000008672000086740000867600008678D8
+:104CF0000000867A0000867C0000867E00008680A8
+:104D00000000868200008684000086860000868877
+:104D10000000868A0000868C0000868E0000869047
+:104D20000000869200008694000086960000869817
+:104D30000000869A0000869C0000869E000086A0E7
+:104D4000000086A2000086A4000086A6000086A8B7
+:104D5000000086AA000086AC000086AE000086B087
+:104D6000000086B2000086B4000086B6000086B857
+:104D7000000086BA000086BC000086BE000086C027
+:104D8000000086C2000086C4000086C6000086C8F7
+:104D9000000086CA000086CC000086CE000086D0C7
+:104DA000000086D2000086D4000086D6000086D897
+:104DB000000086DA000086DC000086DE000086E067
+:104DC000000086E2000086E4000086E6000086E837
+:104DD000000086EA000086EC000086EE000086F007
+:104DE000000086F2000086F4000086F6000086F8D7
+:104DF000000086FA000086FC000086FE00008700A6
+:104E00000000870200008704000087060000870872
+:104E10000000870A0000870C0000870E0000871042
+:104E20000000871200008714000087160000871812
+:104E30000000871A0000871C0000871E00008720E2
+:104E400000008722000087240000872600008728B2
+:104E50000000872A0000872C0000872E0000873082
+:104E60000000873200008734000087360000873852
+:104E70000000873A0000873C0000873E0000874022
+:104E800000008742000087440000874600008748F2
+:104E90000000874A0000874C0000874E00008750C2
+:104EA0000000875200008754000087560000875892
+:104EB0000000875A0000875C0000875E0000876062
+:104EC0000000876200008764000087660000876832
+:104ED0000000876A0000876C0000876E0000877002
+:104EE00000008772000087740000877600008778D2
+:104EF0000000877A0000877C0000877E00008780A2
+:104F00000000878200008784000087860000878871
+:104F10000000878A0000878C0000878E0000879041
+:104F20000000879200008794000087960000879811
+:104F30000000879A0000879C0000879E000087A0E1
+:104F4000000087A2000087A4000087A6000087A8B1
+:104F5000000087AA000087AC000087AE000087B081
+:104F6000000087B2000087B4000087B6000087B851
+:104F7000000087BA000087BC000087BE000087C021
+:104F8000000087C2000087C4000087C6000087C8F1
+:104F9000000087CA000087CC000087CE000087D0C1
+:104FA000000087D2000087D4000087D6000087D891
+:104FB000000087DA000087DC000087DE000087E061
+:104FC000000087E2000087E4000087E6000087E831
+:104FD000000087EA000087EC000087EE000087F001
+:104FE000000087F2000087F4000087F6000087F8D1
+:104FF000000087FA000087FC000087FEFFFFFFFF2C
+:10500000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
+:10501000FFFFFFFFFFFFFFFFFFFFFFFF0000000399
+:1050200000BEBC20000000000000000500000003DE
+:1050300000BEBC20000000000000000500002000B1
+:10504000000040C000006180000082400000A3001A
+:105050000000C3C00000E4800001054000012600FC
+:10506000000146C000016780000188400001A900DE
+:105070000001C9C00001EA8000020B4000022C00C0
+:1050800000024CC000026D8000028E400002AF00A2
+:105090000002CFC00002F08000001140000080003C
+:1050A000000103800001870000020A8000028E00D8
+:1050B00000031180000395000004188000049C0088
+:1050C00000051F800005A300000626800006AA0038
+:1050D00000072D800007B100000834800008B800E8
+:1050E00000093B800009BF00000A4280000AC60098
+:1050F000000B4980000BCD00000C5080000CD40048
+:10510000000D578000005B0000007FF800007FF872
+:1051100000000166000015000000FF000000000014
+:105120000000FF0000000000000019000000000067
+:1051300000000000FFFFFFFF00007FF800007FF885
+:1051400000000361000015000000FF000FFFFFFFDB
+:105150000000FF000FFFFFFF000000FF0000FF0046
+:105160000FFFFFFF0000FF000FFFFFFF000000FF29
+:105170000000FF000FFFFFFF0000FF000FFFFFFF19
+:10518000000000FF0000FF000FFFFFFF0000FF0016
+:105190000FFFFFFF000000FF0000FF000FFFFFFFF9
+:1051A0000000FF000FFFFFFF000000FF0000FF00F6
+:1051B0000FFFFFFF0000FF000FFFFFFF000000FFD9
+:1051C0000000FF000FFFFFFF0000FF000FFFFFFFC9
+:1051D000000000FF0000FF000FFFFFFF0000FF00C6
+:1051E0000FFFFFFF000000FF0000FF000FFFFFFFA9
+:1051F0000000FF000FFFFFFF000000FF0000FF00A6
+:105200000FFFFFFF0000FF000FFFFFFF000000FF88
+:105210000000FF000FFFFFFF0000FF000FFFFFFF78
+:10522000000000FF0000FF000FFFFFFF0000FF0075
+:105230000FFFFFFF000000FF0000FF000FFFFFFF58
+:105240000000FF000FFFFFFF000000FF0000FF0055
+:105250000FFFFFFF0000FF000FFFFFFF000000FF38
+:105260000000FF000FFFFFFF0000FF000FFFFFFF28
+:10527000000000FF0000FF000FFFFFFF0000FF0025
+:105280000FFFFFFF000000FF0000FF000FFFFFFF08
+:105290000000FF000FFFFFFF000000FF0000FF0005
+:1052A0000FFFFFFF0000FF000FFFFFFF000000FFE8
+:1052B0000000FF000FFFFFFF0000FF000FFFFFFFD8
+:1052C000000000FF0000FF000FFFFFFF0000FF00D5
+:1052D0000FFFFFFF000000FF0000FF000FFFFFFFB8
+:1052E0000000FF000FFFFFFF000000FF0000FF00B5
+:1052F0000FFFFFFF0000FF000FFFFFFF000000FF98
+:105300000000FF000FFFFFFF0000FF000FFFFFFF87
+:10531000000000FF0000FF000FFFFFFF0000FF0084
+:105320000FFFFFFF000000FF0000FF000FFFFFFF67
+:105330000000FF000FFFFFFF000000FF0000FF0064
+:105340000FFFFFFF0000FF000FFFFFFF000000FF47
+:105350000000FF000FFFFFFF0000FF000FFFFFFF37
+:10536000000000FF0000FF000FFFFFFF0000FF0034
+:105370000FFFFFFF000000FF0000FF000FFFFFFF17
+:105380000000FF000FFFFFFF000000FF0000FF0014
+:105390000FFFFFFF0000FF000FFFFFFF000000FFF7
+:1053A0000000FF000FFFFFFF0000FF000FFFFFFFE7
+:1053B000000000FF0000FF000FFFFFFF0000FF00E4
+:1053C0000FFFFFFF000000FF000000FF000000FFD4
+:1053D0000000FF00000000000000FF0000000000CF
+:1053E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:1053F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:1054000000001000000020800000310000004180FA
+:1054100000005200000062800000730000008380E2
+:10542000000094000000A4800000B5000000C580CA
+:105430000000D6000000E6800000F70000010780B1
+:105440000001180000012880000139000001498096
+:1054500000015A0000016A8000017B0000018B807E
+:1054600000019C000001AC800001BD000001CD8066
+:105470000001DE000001EE8000000F0000000000CF
+:1054800000007FF800007FF80000021D00001500FA
+:1054900010000000000028AD00010001FFFFFFFF29
+:1054A000FFFFFFFF00090206CCCCCCC17058103CB6
+:1054B000000000000000FF00000000000000FF00EE
+:1054C000000000000000000000000001CCCC020140
+:1054D000CCCCCCCCCCCC0201CCCCCCCC00000000D1
+:1054E000FFFFFFFF0000FFFF000000000000FFFFC4
+:1054F000000000000000FFFF000000000000FFFFB0
+:10550000000000000000FFFF000000000000FFFF9F
+:10551000000000000000FFFF000000000000FFFF8F
+:1055200000000000000E0000011600D60000FFFF82
+:10553000000000000000FFFF000000000000FFFF6F
+:10554000000000000000FFFF000000000000FFFF5F
+:10555000000000000000FFFF000000000000FFFF4F
+:10556000000000000000FFFF0000000000720000CB
+:10557000012300F3FFFFFFF3318FFFFF0C30C30C5B
+:10558000C30C30C3CF3CF300F3CF3CF30000CF3C5F
+:10559000CDCDCDCDFFFFFFF130EFFFFF0C30C30CC1
+:1055A000C30C30C3CF3CF300F3CF3CF30001CF3C3E
+:1055B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2C
+:1055C000C30C30C3CF3CF300F3CF3CF30002CF3C1D
+:1055D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C2
+:1055E000C30C30C3CF300014F3CF3CF30004CF3CE6
+:1055F000CDCDCDCDFFFFFFF2304FFFFF0C30C30C00
+:10560000C30C30C3CF3CF300F3CF3CF30008CF3CD6
+:10561000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF7
+:10562000C30C30C3CF3CF300F3CF3CF30010CF3CAE
+:10563000CDCDCDCDFFFFFFF731EFFFFF0C30C30C19
+:10564000C30C30C3CF3CF300F3CF3CF30020CF3C7E
+:10565000CDCDCDCDFFFFFFF5302FFFFF0C30C30CBC
+:10566000C30C30C3CF3CF300F3CF3CF30040CF3C3E
+:10567000CDCDCDCDFFFFFFF3318FFFFF0C30C30C3D
+:10568000C30C30C3CF3CF300F3CF3CF30000CF3C5E
+:10569000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9F
+:1056A000C30C30C3CF3CF300F3CF3CF30001CF3C3D
+:1056B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2B
+:1056C000C30C30C3CF3CF300F3CF3CF30002CF3C1C
+:1056D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C1
+:1056E000C30C30C3CF300014F3CF3CF30004CF3CE5
+:1056F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFF
+:10570000C30C30C3CF3CF300F3CF3CF30008CF3CD5
+:10571000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF6
+:10572000C30C30C3CF3CF300F3CF3CF30010CF3CAD
+:10573000CDCDCDCDFFFFFFF730EFFFFF0C30C30C19
+:10574000C30C30C3CF3CF300F3CF3CF30020CF3C7D
+:10575000CDCDCDCDFFFFFFF5304FFFFF0C30C30C9B
+:10576000C30C30C3CF3CF300F3CF3CF30040CF3C3D
+:10577000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CF1
+:10578000C30C30C3CF3CF3CCF3CF3CF30000CF3C91
+:10579000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CD1
+:1057A000C30C30C3CF3CF3CCF3CF3CF30001CF3C70
+:1057B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CB1
+:1057C000C30C30C3CF3CF3CCF3CF3CF30002CF3C4F
+:1057D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C91
+:1057E000C30C30C3CF3CF3CCF3CF3CF30004CF3C2D
+:1057F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C71
+:10580000C30C30C3CF3CF3CCF3CF3CF30008CF3C08
+:10581000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C50
+:10582000C30C30C3CF3CF3CCF3CF3CF30010CF3CE0
+:10583000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C30
+:10584000C30C30C3CF3CF3CCF3CF3CF30020CF3CB0
+:10585000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C10
+:10586000C30C30C3CF3CF3CCF3CF3CF30040CF3C70
+:10587000CDCDCDCDFFFFFFF3320FFFFF0C30C30CBA
+:10588000C30C30C3CF3CF300F3CF3CF30000CF3C5C
+:10589000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9D
+:1058A000C30C30C3CF3CF300F3CF3CF30001CF3C3B
+:1058B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C29
+:1058C000C30C30C3CF3CF300F3CF3CF30002CF3C1A
+:1058D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BF
+:1058E000C30C30C3CF300014F3CF3CF30004CF3CE3
+:1058F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFD
+:10590000C30C30C3CF3CF300F3CF3CF30008CF3CD3
+:10591000CDCDCDCDFFFFFF8A042FFFFF0C30C30C90
+:10592000C30C30C3CF3CC000F3CF3CF30010CF3CDE
+:10593000CDCDCDCDFFFFFF9705CFFFFF0C30C30CC2
+:10594000C30C30C3CF3CC000F3CF3CF30020CF3CAE
+:10595000CDCDCDCDFFFFFFF5310FFFFF0C30C30CD8
+:10596000C30C30C3CF3CF300F3CF3CF30040CF3C3B
+:10597000CDCDCDCDFFFFFFF3300FFFFF0C30C30CBB
+:10598000C30C30C3CF3CF300F3CF3CF30000CF3C5B
+:10599000CDCDCDCDFFFFFFF1300FFFFF0C30C30C9D
+:1059A000C30C30C3CF3CF300F3CF3CF30001CF3C3A
+:1059B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C28
+:1059C000C30C30C3CF3CF300F3CF3CF30002CF3C19
+:1059D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BE
+:1059E000C30C30C3CF300014F3CF3CF30004CF3CE2
+:1059F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFC
+:105A0000C30C30C3CF3CF300F3CF3CF30008CF3CD2
+:105A1000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF3
+:105A2000C30C30C3CF3CF300F3CF3CF30010CF3CAA
+:105A3000CDCDCDCDFFFFFF97040FFFFF0C30C30C82
+:105A4000C30C30C3CF3CC000F3CF3CF30020CF3CAD
+:105A5000CDCDCDCDFFFFFFF5300FFFFF0C30C30CD8
+:105A6000C30C30C3CF3CF300F3CF3CF30040CF3C3A
+:105A7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEE
+:105A8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8E
+:105A9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCE
+:105AA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6D
+:105AB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAE
+:105AC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4C
+:105AD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8E
+:105AE000C30C30C3CF3CF3CCF3CF3CF30004CF3C2A
+:105AF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6E
+:105B0000C30C30C3CF3CF3CCF3CF3CF30008CF3C05
+:105B1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4D
+:105B2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDD
+:105B3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2D
+:105B4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAD
+:105B5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0D
+:105B6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6D
+:105B7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CED
+:105B8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8D
+:105B9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCD
+:105BA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6C
+:105BB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAD
+:105BC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4B
+:105BD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8D
+:105BE000C30C30C3CF3CF3CCF3CF3CF30004CF3C29
+:105BF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6D
+:105C0000C30C30C3CF3CF3CCF3CF3CF30008CF3C04
+:105C1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4C
+:105C2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDC
+:105C3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2C
+:105C4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAC
+:105C5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0C
+:105C6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6C
+:105C7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEC
+:105C8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8C
+:105C9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCC
+:105CA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6B
+:105CB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAC
+:105CC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4A
+:105CD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8C
+:105CE000C30C30C3CF3CF3CCF3CF3CF30004CF3C28
+:105CF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6C
+:105D0000C30C30C3CF3CF3CCF3CF3CF30008CF3C03
+:105D1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4B
+:105D2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDB
+:105D3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2B
+:105D4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAB
+:105D5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0B
+:105D6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6B
+:105D7000CDCDCDCD000C0000000700C00002813069
+:105D8000000B81580002021000010230000F024097
+:105D900000010330000C0000000800C00002814038
+:105DA000000B81680002022000010240000702503F
+:105DB000000202C000100000000801000002818003
+:105DC000000B81A80002026000018280000E829810
+:105DD0000008038000028000000B8028000200E021
+:105DE000000101000000811000000118CCCCCCCCD7
+:105DF000CCCCCCCCCCCCCCCCCCCCCCCC00002000F3
+:105E0000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCD2
+:105E100000002000CCCCCCCCCCCCCCCCCCCCCCCCD2
+:105E2000CCCCCCCC00002000000000000000000022
+:105E30001F8B080000000000000BFB51CFC0F003D7
+:105E40008ABB5819180238107C7AE0A58C94E9DFD7
+:105E5000C8CCC0B00388AF02F17E66D2F5B34A2346
+:105E6000D8F7241818182419184E893130EC9244A8
+:105E700088E702D5084A3130DC858A0500D967A554
+:105E8000E81B4EA39836F8BB3A2AFF912A84CE87A6
+:105E900089A3C93F86CA6F5480D03FD5B19BBB0947
+:105EA0002A0F00FE694F6760030000000000000039
+:105EB0001F8B080000000000000BED7D0B7854D50F
+:105EC000B9E8DACFD933994C7642422610700703ED
+:105ED000040D30208FA85427E1D1E0E5E8F0462EEC
+:105EE000CA80AF0892448D356D39373B6412020287
+:105EF0008ECAA1B4A53A207AA247DBD4464B7BF5E3
+:105F0000DC206A73DAD37B9152A52DB6413D281669
+:105F100068F49403BDD796BBFE7FAD3DD97B672661
+:105F20000F5FDF395F1B3EDD597BAFBDD6BFFEF78C
+:105F3000FAFF7FEDA8A297A8971072117EAE256494
+:105F40009D4008C9EBBD5AF78916AD26B9845405A2
+:105F500055632B7DB65E0A1B8DD3E8FD4BC4D01371
+:105F600004EE8F9B432611A2C07B05844C85FF4D18
+:105F70002744CE691D1EF5D37BD2AA2CB85AE3590B
+:105F8000D72A99107D2A3CDF362ED5F3E4FC09A5EB
+:105F9000A75B23F873710C21F5C76F9CFF8AD5A608
+:105FA000FF8D2499B9272FA7BFCC24332F4A847C97
+:105FB00054B828ABD3483FDE070D5DBA3C9690F34A
+:105FC0000D2BE6BF32B6EFF3F512A96D2FED7BFF77
+:105FD0002AA2215E8866AA9189BDEB5E4F48A72759
+:105FE0008790CD859BD87A7329B2AEA4F7DBFE45A6
+:105FF000974B7AE15C2FD37E53FBAE871013C7B566
+:10600000C649BE9FE872BCEF7E2F391E7F9FC8F441
+:10601000DF0C42B00B5DFF74217A2DDCF7142E32B9
+:1060200047D0F6FA67CA49B4343DFC497A7D42F854
+:10603000ADF7D2D291F7FB687F530BA1EF9D54E3EC
+:10604000D75F45F9E8BDEF4BA14DC0477BC6CF21D7
+:10605000017A9F303EB2E8746A7FD3F054FC918E8F
+:106060004E7F4FBCC87F167F5589ABB23AC927E730
+:10607000AF3B80BF326CFCD5BEB8DFF13E297FC597
+:10608000DCFCC5F171BA9DAD9FEC1EC6E8C2E9E526
+:10609000A64F5ABA7CD2F7FAF2D316C0ABA77DB19D
+:1060A0003982A4E0270EAF45AF4F0BEF407C444848
+:1060B0001CE94C484482F97BEFB36B469921009F61
+:1060C000D1E6615847904D4582B7B6DC2D52380372
+:1060D00024D13AAE88B6BBD72C00B803C7E79F02DD
+:1060E00079680E5568B3E97AF569C643F3E835A3D4
+:1060F0005417603D5B89084A808E576D969702BDA4
+:1061000008B69F366F099B80071226643821F7F185
+:106110003511221A326DABF0EB9854EB504927C37E
+:106120008770D1D3F7FD74EB577BDF23178BE0FF2C
+:10613000F71058DF40EF91287BCFA4FF00DF39AE86
+:1061400071F439B46DE3FB00B1B5E9F3A3F00BE2F0
+:10615000FBEE2F64BE6CB24F33A87E504B443D0122
+:10616000FD89912DD37646255544F03C480E528A40
+:106170000C489766422ADB811F493B5938B117BE4C
+:106180005344C0F514DCBE734D0B555DE7CAFC21CA
+:10619000E0F3A04EC8B09CBEEBD9D6401979BCAD97
+:1061A0001D7A0EF93F46F9680C7DDF0C317BB8B5DE
+:1061B000E4653D6A93EF0C41E07CE9E60F62C83389
+:1061C00040CC8055E8B5440C7B039F9E3F64171E6E
+:1061D00007CB1FFEA88D3E64E8F40A72BF61B0FCD5
+:1061E000F169E7B3E8DA57AE1A2DBA6A84D2614B87
+:1061F000F1A294FE477ABAEE23D03FA384841329F8
+:10620000DE1B25085C0E4C87BEC12BA58F9424EFA6
+:10621000BD0E7A49F93356ECED071F52AE131FD667
+:10622000B8DE7AC97897AA4422EB228CA7C2789468
+:106230004FB7041F3609958773C0DB141F527C4A81
+:1062400027B44931413EA43F9D026D7B83E1C45692
+:10625000E48304D2C582CF63880EFCCAB93E479B53
+:10626000AC30053BFCDE7A15E150D147A0E3E87481
+:10627000408A0AD94F3A816F2D7E0536B87829B405
+:10628000BFEEE08356632A4945078B5F01AD8C5F03
+:10629000BF3E38FDE29E6F8913DE41BFE7978D93C5
+:1062A000363B94FE3D999CB4E84391580503D8F8D9
+:1062B00060B3420E089309692A5C46A2F4EE667840
+:1062C00044ED580B5C0BC03F9C8A7A81B40932C004
+:1062D00069D95512CCC17ED30503C713B55AD42B47
+:1062E000923FCCEC2B7F9E1E2E36FF70231ED629AC
+:1062F0007EF3493C2C52FA505D19EA24A037C304BE
+:10630000F88084185F48DC4FB7DE8F717EF692A369
+:10631000F83ED5AEA68EF6CC29C77325FA908EB37B
+:10632000A584243C48A7B8066DB94426B02FA0FA2E
+:10633000C95F40FB6759EC2F2D0801FC59DCBE9268
+:10634000599CBF05AACF289EFDD39CF2ED73C9BF0F
+:10635000CCED711F7D96663F615DDDFEDB6302F76C
+:10636000DF32881FE9CDDF27FED4FEAAE5B75978D2
+:10637000CD1309E293FC54493C51C4D746DBF7BC2A
+:10638000959D80759B159135CD140FE6DB42A809CC
+:10639000E829877BB2E8F3934F4AB85FCA5B567F20
+:1063A00009CCB7BDC11C5B6CF307B7CBB51AE09B3A
+:1063B000F28566B7173790E80B826DFFE509B68C5A
+:1063C0002D1E86FCF7767709980A01F9CFEB8F0529
+:1063D0005F05B9E4F793F8B1B7A5BEEDDC7CC2ED7B
+:1063E000E50DE5613A6F2BE8AE11F8D814283CAD05
+:1063F00005ACFD93C6E1E5603F5B3359FBA3C6776F
+:10640000C28DC817512D42EFD5138E972E8A17A42F
+:10641000BF916FB7AFEEAB7BFD3B64DD077CB6D7BA
+:106420009F735D09D8CF32310468DF1B3BA2AFB147
+:10643000E1E39B9E8A37001F2349422040BF582E2C
+:10644000CA8FE5CF01E341BB80CB5321398CFD4698
+:10645000477ACA15B8B5427F19AE2DC1E7B2519E31
+:10646000C81CFD24CABF245CBC7CF0F29E6EBD013A
+:10647000814452F9F3F74B392857816974DD0EBD19
+:106480005EA8233FF271BF063402FD914D619A0C64
+:106490007A24BE229262BC9F0822F6D3C01E5C41C1
+:1064A000D150B8ACECDFE87A352D3CE5550A97279A
+:1064B000D71F32116C66270C2E039E78A306F82591
+:1064C000472502F2AF158623B7019F924858A0F7DF
+:1064D000B56038B4D5E8BB3E9530FB9043AF179913
+:1064E0007C13E87F4F9E8EFD09D80B6B5D63002EF9
+:1064F00015E1FA0CE89D2B4E1F98CE23487B3918E6
+:10650000B374F4FEACE99CEE7D377D030293AFFBE0
+:106510009BCE874D2A4F2DC7055102A5182F46BA8D
+:10652000689C2EE795A8067EE396AF8A641F6D3FB0
+:106530005ADFBF9F12033FC563B39B3AA3DFC8BBBB
+:10654000F4A9C042E9DEDB7597589948C14F9522FE
+:10655000D3FB5BEE7A383E16E8F98A73BFA7AC0A24
+:10656000A35F4AF77D95400FEB3D6F31B34F643F1A
+:106570005D0FEDAF707FE47CDEA22C92621EEBBA61
+:10658000C7057F21C5732AB9B94FE2FED54E36BE85
+:10659000E5EF9C2FE87F7C0B3F172A4572B814C9A2
+:1065A000EA23A57C3114EF8549BF3B0FDB1EFE2893
+:1065B000512BFA08D8BDC2CE72B82AA4A711F8741C
+:1065C0009748AA52C1B7561211BEC230DD7A50BDEB
+:1065D0005F688AA099C8BD9281F7F357D51E5428E9
+:1065E0005D5A47911098994B603CD0AB07BD683F0E
+:1065F000D55C92F0523DFD5AD1574CB0CB7A21096F
+:10660000032C7A2DEC39E97FD4BE1AF4B9B2316A81
+:10661000225CC108EE110E152D437AB750FFCEC390
+:1066200016E2E0A71653EC04BE8DD3F1C11F8C1BFC
+:106630001528AFE782D4F2C3CFC7147E6BBF712990
+:10664000C485282901CE0932C2494762F4D4195EB3
+:1066500046EE9E453AA9DD69CDDE85F2605E495081
+:106660005E6572D814C0CEC80953A4F0C6AA983E7D
+:106670005072E382DD8EED21D107ED7C23EB9DE8A6
+:10668000FFB5FE595A910AAFD522D36FF7717D78C5
+:106690005E699F8FFE4633958FA2BEFDC39C0EDFC1
+:1066A0008E2D7A703CEA336697ACE75D82E18863B1
+:1066B0008EBCA0E27ADC7ECD3CEED7B41452BF068D
+:1066C000E59D2C003F2683F3470B608F3EF76493D4
+:1066D0008449E1C8007F86FA25A494F9251AFD07AC
+:1066E000FA2F7F85D39FF1B8FC9674FECCD784C86F
+:1066F0000F50DF515505F0EF16E2F3C701BE0BE86E
+:106700007ED2E8BBEE2EBE9F9C2B6D2B6AA1703D06
+:10671000962B3AF861349797C78879E2227D1E2F2D
+:10672000140D803B5E2FE23ACE19CC6F27EF7A1D15
+:1067300076A2D95CA4119BFED9C1E5695B83E69082
+:106740005BF7D5AFC6A391147A4BE7F4C99815C689
+:10675000F8873F9440FAC33A53F9E90F945668FD1D
+:10676000E93FB9445D83F82BAC3825C3B5CCBD5F98
+:106770004A3DAEFB4AEC7EA694BEDF60AF5B289E2E
+:10678000DE561CFE78A704FB2E93A0FFE70D5153A5
+:106790001580AB3E1CE0F786A8B8C1B5BBBC12EEB5
+:1067A0001BB3221AC891659FBDA1C856B89FF52595
+:1067B000790BD0CB5B2E8A12A59F269B24C7263748
+:1067C00053E1A68DBF33A9BAB4E3438B7EA512FC77
+:1067D00054522892B1148ECD1F3768763A75D16D18
+:1067E00008DBB73AF9265EDFBF9EFDB47CF173D1BA
+:1067F0008A8738E9853FF67808A77392FE7DE21A0A
+:10680000FF39E8AD71FA19947E9B0CA027D3177459
+:10681000E385FE435C33C3D08E1B8668DAF4D8C7A9
+:10682000620EE241BE20A35EDABDA6250CF4D2E9D9
+:1068300018405A7A0DA7B2DB5D828A7245F5C655BB
+:10684000D27454C802C43FE74A1B91DE8F517A8349
+:106850001E7B8CD4765DCCED957F2DAAA21FDFD553
+:10686000689637160F456F52F8A85F47F630FFE578
+:1068700012CB7FF97BCA2783F057CE53A3C1EDB16A
+:1068800017F84AEEA62C4DE12ADCC8EC26F86A3946
+:10689000B46D50BBD729F4F2A387CFA394260E8FF3
+:1068A000477A3BEDD363852F0B1EB06FC5CCBEA9D5
+:1068B000666718F44CA098DA2782F66735E06744DB
+:1068C00049BC1CDA2377CFC3757C1BFC503FD8171B
+:1068D00082F8F8A698683429CD7CE148A728C1FE43
+:1068E00099E0FECEA29F7B5E6AF5909EBE6C712FF2
+:1068F000D029507B189669B77BD5525EAF3D1C51AD
+:10690000D289EAD6ED2FA4F513FE2CF1FDD8CCC622
+:10691000306D8F825FA93FB9537CBC11F663114F74
+:10692000B81EE9EEDA4724E3503CDEBDB6CC122AAD
+:1069300063F96FE83C7776291400027E80648F0348
+:10694000DD097689EA9BB5DCAEDD4A2201787886DE
+:1069500088185F3B438E04AEB0F1E14E4965F3B455
+:106960002A6F43FCDE8AEFDE16676D4BFFDCB1DB7E
+:10697000D9BE9D2C1A0EF1DBDB772AB8FE3B5DFBFE
+:10698000D698A4E3B87790DA16C043B342D04F58F4
+:10699000AB1319E2B11B7EF89D19B04FF836B72B37
+:1069A0001F50FE326CFA679D3FA1C27EF69D8E2B72
+:1069B000965D4DE0FD44CB08D89767939476F496A6
+:1069C00056277C03C1EF8697904DFDC221B7092958
+:1069D000E3874F4982236E58AF052641D0E4BC9728
+:1069E0005DCD0AA63FCCDF7A134DE0274A06EF5F64
+:1069F0003B99E5396A67C275A0F77EC6FDD1A1BE95
+:106A00007738CD7B1BB46E15F8BF46362B05B137F2
+:106A10005EA529B5E19120C707CA3B471247BFD6FB
+:106A200041F6AB14FBE9E786F794AE99E2E4BE7059
+:106A3000DF40A26F81DC9D17A3D51827E0707B0093
+:106A4000CF125C65A427C64F8A605E7FAB9005714C
+:106A5000940EF44FBC86ECA0778DA507A85E82B893
+:106A60004F4689F3B93BAED293A46B27CA1786442D
+:106A7000E992029ABF53027FB14C3E9DEC4FE7ABC7
+:106A800086754DC64EA85FEAB87EA926C683B3A612
+:106A9000A17C61BCAE6EFE1813E0A8CB3342A60108
+:106AA0006A3414C6315C7C5573412009DBFEBB4659
+:106AB000EE51418E6AA8FEB6DFBF27C8E2C9E9F4ED
+:106AC000B64234C35F027EAD88789274DAB6ADFB0D
+:106AD000A3B850D9CEF655594BFAD917DF1364F144
+:106AE000E2B55BC666B1B88B535F9DE5F6E127CF93
+:106AF0003CAE76839E79FAC4F5B0CEF5FF53221AE8
+:106B00009DF7EC3399A413ED464205BBB1AE434A61
+:106B1000690F096962F9F3EF6522BDD63DE7492C9B
+:106B2000A0EFAF7BE19D4984C2777653CF6B23C141
+:106B30009F7E5A607171B37BD2627A7F9D4C56A75B
+:106B40008AB34C90D93EE4F48F325680FC0A6D072C
+:106B50006FC671DB972B6057AD7E86AC20BFD27EAF
+:106B600068B7CDA784C45821157C2C1F71FA2981E0
+:106B7000C17740C1FDDFBAB6BD6A94C251D3F621D8
+:106B8000EA8BD9DF7B360078A8392039FCB89A36F1
+:106B9000A9D33309AF27E00A71566106F009E797D8
+:106BA0008E0D185FAD6E7FE0432900EF3BF516C5F3
+:106BB0004BA813F0FAA6145A00ED1FFC63C0A0A85E
+:106BC000FAE0F01301C02B1D778D9A05717C277FA9
+:106BD000C3F81772FA8E47391DF3BD35ED5BD87CCB
+:106BE0002EBDF801FC52D0370E1B919D7974D23620
+:106BF000B83CEFFA67CF3D6AD2F94E3FF7FB474DFD
+:106C00000AF75D7FF9F747BF0E72F9CF5E1DF47A80
+:106C1000CDD3BF0C101B1FAE9359FCE0EC28BA85F6
+:106C2000A2FDCEFECA930087E0EC4BEF8D36E87AEA
+:106C3000CF7EFF4FC30DDABFEEA5B9F9B0FEBAE7BC
+:106C400067E7F7E7C7009F263C76B81238BE714069
+:106C500060CEC28BFCEAA2CBA18E43A301CE33C788
+:106C60003CB83FABA1F7EAA7029D36A09D85F6464A
+:106C70008ADFEA67367F08FAA12F9ECD912206BFF0
+:106C8000A81A0C029DDF9987F4223D681FDDFD6B79
+:106C90008E523A4E4E4FB773E46315F45CCD335BBE
+:106CA000D87C2EBA9D815FAEEC4BB7CD2EBA9D231A
+:106CB000773D560089D78E618E3C8275ED8D9F475A
+:106CC000B222FDE8074BFE07C22BE659285C4BE5D4
+:106CD000F0376490A3E73292745D00747DF6DC684F
+:106CE00042F9E27DA5E766B0073D2F79F47DF4FE19
+:106CF000BA97DE44B93AFBFCEBAA81768CF805EA38
+:106D0000579E25C99FC3E06756339F93D4ECCFECC1
+:106D1000F4047AE9539D58586904F0FE09BC9F6059
+:106D2000FC5E9D38B8444841AFD7E5314CFF27F2AF
+:106D3000102F1BF6FF46257E271D8532A0E389799B
+:106D4000703F1D1DADF5EBB0FE99367AEE6772EA25
+:106D5000EE5F4DE511EC5D92AE09E14D92422ECF12
+:106D6000EEF5C860EFCE825F95326FCAFC99A1E65E
+:106D7000577E263BEBAF92F9158E87F4FCC1E47B7E
+:106D8000A0F50D157F3F920D1CD78DC7D31FA7D639
+:106D9000F7EF717D514DCCCA1197F6F5436412316E
+:106DA0004716F5C27B1A36A894FF4E3F2D613CA8CA
+:106DB000A5FD10EA6DB79EA84E13DFBC20333FA19E
+:106DC000FAC0C149A0CF4EBFFC23E4CFEA674EA86A
+:106DD000102F7EADED076A7769AF3C803D48D8EC57
+:106DE000C1E9EF1E9CC4F4001D3F059D14858D5F15
+:106DF000F3A273FC9A673E748CBFDE6C47FF60A001
+:106E0000793E90C3CB61BD1F1C5608E8D10FDAA5AF
+:106E1000CA547EED07DC1E5A786A797DDE6F200F3A
+:106E200036ED88CF00BBD9B1299CBF1DFCB5230A24
+:106E300001BD4DE4F0EF3DB4DDF1BACF80FC74C785
+:106E400091659261DB87FED085CF9947CDD9997442
+:106E5000BC99DD9169E0A2BAF546D971BAAFB2F139
+:106E600041DDEB95F9A0EF611F6A8C87F94241D8AB
+:106E7000E74A8179952C7F2DEADE94F69A8DA7F862
+:106E80002318AF5274311923837147924423C45796
+:106E900089DFEFCE4F44347B1E6AC5E183B0C5CC99
+:106EA0005DFC62018C132031FD24FA9F2474B11F14
+:106EB000FFCB9D8FB0F09994BF34F9890CFDE6E0CB
+:106EC00041D277BCBE7998A806F1ED16FFDAD6223A
+:106ED0005B1EA625D8270F3357A178681548CA78B6
+:106EE000ED78A562BE9287BBE368AAE737294CAE6E
+:106EF000AE25DDF7AE0138232C9F33CB85AF2F7144
+:106F00007CFDF364BA70AA42CBC1B3A2F89DBD2444
+:106F10001C53E8FDB9AB7A2E7F19BBF37C8E395E2A
+:106F2000BC983178FC0D356F17F12CBA5D1944DE31
+:106F30002E5DFEB8170E93EFC7731C798C436FDD7F
+:106F4000AF75639EA1B6B5C816F71BDEE92561CC07
+:106F5000E319E81F0EEFBCF39BB741DC39B730E40F
+:106F6000257DC7912F5C8D71232B9F2F17863B2189
+:106F7000DE2FEB46B984F32C0F437E61B3C1F205DB
+:106F80009B83FDC7F56628D16605E351D7E0B8A21B
+:106F9000C6EB0F06B9CE6F2C0E209E0314CF20EF48
+:106FA000B8FF81F51D1778DEBCDB94207F78221BAB
+:106FB000F305019994403CE0BCE00B6DC27C823348
+:106FC0006F9E8E7FB7CB26E6CD5B8D3E79F3EF28A3
+:106FD000B67C8396266FAEF99760DE5C23367FB76A
+:106FE000A8B75FAFDCB9F2E63016C665B6CF86B893
+:106FF0004C733671E4CD9B41F0AF22E439E5EAD918
+:107000005877E6E5CFCD59B3C3F63639FE32B679B7
+:10701000FCE98FCDE73641FFDC91A416EBD4E40800
+:10702000596AD383EF292C4EBB4109FF50B1D71DBC
+:10703000717EB0F23F87DE7A0FF90AAE63285E9B5D
+:10704000295F7990AF4E11BB5EB5AE16FF341BFDC4
+:10705000F3857A610AC6CD92EDA0897C110846C3FA
+:10706000E114EF4DF230B9B7E60D94513D4AE54DCC
+:107070003122988F5275BAE135060F7F3AB82C3E0F
+:107080006D36C6B03A289D60FD5EFA754C63714C52
+:10709000887051B876DD787BA83F3FC75AE70C254A
+:1070A0007CD28EF7DC4B52D7EF56AB6CDDCD9155D1
+:1070B0002CBF5EE5CCA742FADA1E679D2E44FF5D29
+:1070C000C13821CBA78A5A84E7474C2B3E1E4CC6B9
+:1070D000C30DA833BCCB047DA8AC6A3705B8E6B2B3
+:1070E0007C4AAE16FD58B1D90759EF6672EBCA0F4C
+:1070F000CE954E0F09BF565DDCD6061DFDF42D0D55
+:10710000416C6F6E30F0DAD210C6FB6E3A361B2F30
+:10711000076FC1BA341FC665D38DFF604308C789A6
+:107120003594B1F178DE9C90CC26E02B55B4E46523
+:1071300018B6FD127F6E163481FC6D17D8F36B5AAA
+:107140002E4579B3F86787D17F5C5A4ACC403E1808
+:10715000EAF87DF9F527B8CEE6597ED4AF03C951D8
+:1071600056279B77B0F328497BC1E6D9314BC379C9
+:1071700076E40E304F9CCD3330FC0C5FDB0E9EC2AC
+:107180003A0485F203A828450FA7AED3E3F2D677D9
+:107190001C0FEAF9E620AB0B538BFD6150FECD06C8
+:1071A000CF3716B27CA35A32BC02EEABA1CBB04EA5
+:1071B0005C2DF5633E4F2D1E7E0BB4B71DDCA25730
+:1071C00080FD2814435E03EC76379173516C307E5A
+:1071D000AB1697DC06FD7590630AC7280FDB6FA915
+:1071E000C557DD01EF1F9CF29AD144FB3717FA42D5
+:1071F0001E90B76ED9C1FF83D61385CE3C1A91A9D4
+:10720000BEA0FA6BDB94DB4B503E355B9D648A7A03
+:10721000419BDED8A0DAF4864AE6988087747A87A4
+:10722000DADFFBD4BCBEE358EF6F5022F52AEA85C3
+:107230000871D6BBA7CE675BF400370BF2917230B2
+:1072400059A7B7A060786F7EDBAAD373E7B5E3F4E4
+:107250005FAABCB6BBFEFCB3AAD3DBA926EBF446FF
+:10726000419DDE8F1512EA84BCFC2FA5D03EA32FD2
+:10727000DFB9C7739FB7A0FE8F06FB9C7472F9330A
+:10728000D5993F2D88BAE87EABD731DF2B202FA5CB
+:1072900003EB979155CE7146D53AEB6A2FA9CF7182
+:1072A000B48BCC118EFE97B68E713C1F1BBFCCF1F8
+:1072B0007CFCEEA98EF684C4558EFE97B75538DA5D
+:1072C00013DBAF73F49F7C6091A33DA573A5A3FF6F
+:1072D000155D6B1DCFA71F5EE7783EF3D83D8EF698
+:1072E00095DD5F73F4AFA7EE900A729BCBEB9073C2
+:1072F000F3457B9EB6358FDA25BACFDF9147190665
+:10730000E3DFACAE4B658F937943F77BB2A1867513
+:10731000CCFB8F9B035722D7A13D958DE11506DE4F
+:107320009F310FAE649AB3BE5635587D32ECE39C64
+:10733000F502CE3A6355DA86793ACFF12F77099381
+:10734000FAD2552D74CAC160EB9415C3F5DE10E571
+:10735000E2BC2517A3A85C60FCED6309CFB5CCC9DE
+:1073600044FFC2B69F423C5AFBA96B34120317D3A9
+:10737000928BF2553D235FC56ED63ECA230EA52ED5
+:10738000CE92BF804DEFC37EC5D233CD6583D3AFE0
+:1073900052E20A873FE9BE3605D6A5D38F051E9B6C
+:1073A0007FEFD68F339448213CD7E4B0496CF11A73
+:1073B00052AB38E01E2C9C9FD40EDC45198EA4D015
+:1073C000E32AA9C5BAAB9615610C02903AE2E0D364
+:1073D0009D8BFF47198C4BFDC219CE7532BFD0ED86
+:1073E0004F53FD86FEF40EEA4FA3BD73E947AAA7EB
+:1073F0004C5EFF65303F82E943F73A3F2F3FFADFAB
+:10740000C059ED875E81A25025EE0FF34402FBC305
+:10741000E6599120C4E7ACBA79EBBD56CFA5384EFA
+:107420002C5715217E19EB9A8BF1FA262DAAB13C27
+:107430007114C769CA16F5547562751E962FD6EA7F
+:107440001F18BBBF9FB88BA69268AA78DA4E0FCBE5
+:1074500007C5F4B55D604733F35403F6DCAD074F61
+:1074600045208E2497C93AECD70905E61D5B7E8F2F
+:107470009028C699B4A0887657ABDF81F30F04EF4C
+:10748000CD1E819FFBD8D22FBC5E3575DC251DBC7F
+:107490005B00DE6903C3EB05788B60FE6D387F8D82
+:1074A000C748897F85842B6703DD4E7C3982E95686
+:1074B000CA36201F3BCAD8BE9C1A02077F5BFB1C42
+:1074C000CADF0F7BF2B07E15F9DA3AE770A347C73F
+:1074D000792CBA92C21C8C6B04A2B1B1C594DF3274
+:1074E000A36C3FDFAB9F181F652A6102F12CD92FD7
+:1074F000627E50E5F110ABDF1F383E9B667523BD01
+:10750000365F29934D426F9D75AC90AE6B72EFBAAA
+:10751000FE8F279BF1279FD7479664615D8AF44CC5
+:10752000B03FBDEDE3F872EBEFEF79B8FE2E20052A
+:107530004C7F972E877C77BA71DC7E4C3D8FF30EA3
+:10754000BDBE9E9F2FF0DFD30571262BCE4782D381
+:1075500052C6E57BF1CAF295BDF45D6E7452FAC96C
+:10756000D3A7629EDC3AAF40D599B35E98D3D7A239
+:10757000AB15472741163FB2E8EC4DE2734FBFF819
+:10758000F482BC5CD1179FBFF2F07CC37F317CBE1C
+:10759000023E0DBD6666B2F3E9E4D05709E6A50ADE
+:1075A0009D7268BD67F1BB7BFD7FFA2FCA4FD6FA8B
+:1075B0002D7E48DFDF4CB9AFB1F2AB999CDF343898
+:1075C000654515CFAB656FB75E0AFBD7A01FF77D8A
+:1075D0009965313CDFAB105307BD9069ED6BF879CD
+:1075E00023AB5EC957EAF4CB34D7FE45E575517D30
+:1075F000CEDB72FFCD7D8E2A895F17BD266B69F2C7
+:1076000063833C7FB48BE7EB0AEAE28DB01F2EB8B0
+:1076100095D5FBEF51C86AA8AF1C51658ABE5CC8FE
+:10762000DF147D3F83AEBFE0C5871A4702496E3540
+:107630008AC0CD7846331C76B8E0AE78B98F3D9FCE
+:1076400002E33CA531BD5B5019C773CE4DCF8FCF40
+:10765000023FE195B796EB101FF828B718F74F6770
+:107660005EF08441FF9FC921555817F6C2CCD7C0A0
+:107670008FFF7D43578E6CE39333DF7D7D86428998
+:1076800074E6B9D767C848AC8463FE0D177F310331
+:10769000E0362B48492DE4EF7495C0B8351ACB97E6
+:1076A00059F53EBB86AB2D70FDA9379BC513F3C5BD
+:1076B0001DD0AE878018F80D3C9E7FF5696339D4E4
+:1076C0005F66772902D4E33D2498A69F5ECF9F781A
+:1076D00048003F4BEDAC85300BBD1F3A042837C73F
+:1076E000B27DC9F922525244F5BEEF70ED78F4A78D
+:1076F0005DF54E16FFCBB309E6FB7A6ED41260AF90
+:10770000B7CBC6375681FD5E25633DCE76F930CACC
+:10771000859B8EC7BD639CF5B93C1E7DE8AD3BE201
+:10772000E5F4FD7BA688C8AFFE1353B2480AF9DD25
+:10773000DE5086F3070ADEAE2C07B03EA67767F46C
+:10774000EE93FC3231B3A889548A4453A178F1975F
+:1077500011F2B68DEF5A4412D6E9F3171A088ED3F8
+:10776000D1A0E1B5AD411F5B4C3706DF6A08E27579
+:10777000678381D7871B4AF0F9830D2187DCC37C9F
+:107780006F97F0760A7FE5F3BA3ED040E7B5C1B116
+:107790006B22957A4AAF5D3C1FF540E9D4ACB5FD4C
+:1077A000C4C1F634740D9B3396230BEA4DEBF4BD44
+:1077B0005BFB817F4FA3B07A11F83577CB917DA821
+:1077C0001FA3058B6CFA91FA6D0584B2E2BD2D23DF
+:1077D000E6CC29407944799976388AFE7841302E72
+:1077E000401CB1E028BB6F9DB7407A5141FB61EE70
+:1077F0001C4101BD594ADA012CB5344A2A68FF9967
+:10780000794BCAE13E99E8BC3F4365F20DE356D09F
+:10781000EB6C2DF2236D3A7CA763B7F92C5DCF1F7B
+:107820003B3C06E4791E7CF94F2AEC0B62BF5235D3
+:10783000F0630A5E3C81750F31A15B85CAD8E35ABB
+:10784000F51C99EA19DC0C627C952A16CA2731D0FE
+:10785000B118FFEC89CDF1C37997E8297BFF5DBEB4
+:10786000E8DDFCE448580B523E4AE62FD6C7C27406
+:10787000D3F902CF5F1CD7D6C5CC4268D3FE53588C
+:107880003B46DF7F213B3A52CC86A28BAA58D79742
+:10789000A06DF5AF8A41BDED9B5CEF107FB408E4AD
+:1078A0002DD9D6693BD3D696599B68EC6AAD77C380
+:1078B000A13FBD067AAEFA45A11D40A37A8FE1FF34
+:1078C000C0435877DBD6D0A5C7144E7F8B0E542407
+:1078D000270409D6D3A909213186EA8F09FCFB14B4
+:1078E00005D3C24623E8D7841202BD19F231BF7115
+:1078F00042828E6393AB0969BE8382795FA0E336CF
+:107900005637ECE6AF67BD2C3F504FCCAD90072308
+:10791000CF283AE623799CF2B465E7F87EF52E2F5E
+:107920006B2A9B4CDF65A07FD6C818075B5F142FBE
+:1079300057E93CEB7F5414A29615F24A58D7B03E53
+:10794000BB7DF854969772B41FE275B4C16C331BBB
+:10795000CE0F541F786834D4055493F8CD5F037864
+:10796000FF95E51F4F1DBC32EB6ADADE40DB107F6E
+:10797000DDD0F1BA1AA5FD8671B8AB3BA65C07EB6A
+:10798000ABDE2612B188C967783CC573387E994C46
+:10799000F9E49AAD23E77A299D9F1A13D645CA07C1
+:1079A0002B7DE39A3568ABFA04909B95BE89CDC0D8
+:1079B00057EB27F2EF359089AF86655E2F45F96268
+:1079C000D8968618D427EC5F59791D98D9E122936F
+:1079D0005BCA88983F94B26398B7F843333BEF0291
+:1079E00029FD8D940EC532E992E97597CAE867B60C
+:1079F000C8182FA6F75B95A940977818CF57B432CF
+:107A0000BD3FF6450FC69D8B6BC377A25FA097E283
+:107A10003E653449FE605EFA12F88D8E335E27E5CE
+:107A2000700EE1C75E162F2C5EB16C3DBC27652E33
+:107A3000F1E1BE5C62E7A0C8B7599C7A979868D715
+:107A400040CE03C548DF5D01C617E6C3A5C817FBD6
+:107A5000C58ACBEE86B8A4B066EBBF005DB38B09D8
+:107A6000D015EEDF43EFEFE7F494B2433AD06F3F27
+:107A7000A7672C219A501F63DD7F41587B27C8DB05
+:107A80003AEFF373348AD7E19E707C18A5C39DDE6C
+:107A9000E763C102A4C3188DE2FDCE2D1D316D1424
+:107AA0001DA7313C42B7B5C7FF997A23989FEC4098
+:107AB0007996B31F5E07F24E9FBFA2D1753E95C364
+:107AC000F5057F5E3C26A93FC284DA1AA9B1579F0B
+:107AD00068D43E14DBFACFA1FAE0C947591DFBF583
+:107AE000743E9077BA0ECCFFF64C9013509FE5A3EE
+:107AF000B080DFE29B3806EBF3E8BA09F8253D13C6
+:107B000065B4B3561CDB3341C4F812F4077EF08D24
+:107B100062FDA9A044406FCA8532EE5765694F786F
+:107B20008201E16396D715F485786ED55B62CBE36D
+:107B300092DE3A606C17E1676E1CEDB19EEE029129
+:107B4000FA95B9C7170AA3E9787778B9BF9D4BFDB5
+:107B50006D7A7FBD97E9A5FB23E69721C4418CEEA2
+:107B600002D44F243215AEF93715E747FBB14B7DF0
+:107B7000FDEA6EF41F76F8539FD39CEE63FBF92663
+:107B8000FF111DF8AD9E50F907B9D019BF59FAC3BE
+:107B90003A9FE0AE27B6F48992CDD65837BF221F60
+:107BA000F480CCEB93643DA4437D6579E634F4FB2B
+:107BB0009EF432BD271DBCF20638A7A1FE2BCB0BCD
+:107BC000EDF146319ED45340DA815FE56098D8F3F9
+:107BD000BF963E6869D0F0FAC4D4711520274F4C87
+:107BE0001D5EA153193834E9C75D90673AB787C95C
+:107BF000EFB9C3B7E1F9C773268B37015B615CB29C
+:107C0000F3113CAFFBB81C7910EB6AA13E8282B441
+:107C10002DDB59BF55CCF16272FDD4ACB0E79B1B94
+:107C200058FC58BD7039C6B554AEC73DD15BF1DCC8
+:107C30008687DA32385FA911D364DF3B6078D00AD7
+:107C40009DDFC3502F4CC2F74D2F8B1F59F522EEED
+:107C5000BA100B9E191C9EBEE7329CF4B0F65F165C
+:107C60001DACF7EB8470BEDE0FDFD45C9048C2160B
+:107C7000FFE8ADEF56F1FE59A88BCF823A9E68FC23
+:107C8000EA22908304EE8FBCFE3A42F8F795904FBB
+:107C900083728FBD0E3DC35517DF475E0C67DB5DFA
+:107CA00017B11E9883D7F1613DAB4CBE29507A9F26
+:107CB000C9F8ED0CF06B6BA87AD02040249B3ACC2D
+:107CC0007F96FBFBF28B7787471A363E170CC73E31
+:107CD000A1FAC0428C23D4ECF763BD7F35E8BFC95D
+:107CE000706EC0ECF238CE0B843BA13E4F39C0C65B
+:107CF0007B12E0A1F7FFA85715C0BA8FC3FE270F6C
+:107D0000EC495462875E0E231E62DEF031A2337DA1
+:107D100026539E88655BFAAC3A061B865D2A71F88D
+:107D20004BBB7CBCEDAB8EC54A7BEB3F8E6BFF0F34
+:107D3000F59B55DF715CFB0FF48776A9F14ED07788
+:107D4000E60B1E03EC177D1FCFEF9A2B4BD00EC412
+:107D50008AC808C0C32BD92AEAB9D8F39E7DA0E708
+:107D6000666BD13735DBBEE14CF61BA361FF956234
+:107D70003CD331DEA8A18D47E7EF00BC5ACF5FC9E5
+:107D8000DE85E716E97B06E60D0B0F8F5E43DBC34E
+:107D90005FF0E0B9216BBFE9E6CB7C2E5F2DAEF33F
+:107DA000802AC89B1FF46D2DCA9927E8CC8359728D
+:107DB000A75E98E0C8073C097696D24F95A310A21B
+:107DC000A4CF4BF1B9C9F9AC85D723A49F2727CD00
+:107DD0003C57A03CA79F67069777C2E558D693DF2C
+:107DE00085E9E7DCA03B4FE2D653D6D5D253DFE29C
+:107DF000FC2993E8153E3ACFBA44FB3C1FBE1D9DBB
+:107E0000047EF0071A3B0755D2F6D0CB609EBFE93F
+:107E100009DFEF9D8EE7BEFEC99B37747958E923D1
+:107E2000BC2EB38F1E62FED5ADCC5FAD9B3F15FD62
+:107E3000BBBAED6374FB3945F7B5EA4286430F0DD3
+:107E4000F31AFC7B7B26EAA3AA0B017CFED9CDE7C3
+:107E5000759C5FE93B9F1F9F5BF3DDE5D2B38726EF
+:107E6000FD74179C73AFFBBE227A6CF3D47D9FD751
+:107E7000FF7BA9DE75CA7B18E45D2E22C9FA2ED0DD
+:107E80000FDB54AB1D6E9E330BFC5A9B7E2803FF09
+:107E9000ABF77DF8CEDD361FEF6F56A6EE9FE1EA19
+:107EA0003FC61A7F21F677C393D43FB01FA3FDE5E9
+:107EB0003F7B2CF8507F3D24BAC6CBB1E6BF11C73B
+:107EC000B3FCEE8BDADA574D19F8345E0EFBA79E41
+:107ED000DB8801DF9F785C0EF94276BED518BF566D
+:107EE0005DB8D441EF5EBC8F73DC7FAF21E8A8D7CB
+:107EF000BD235A8775DA1779FCA98A7AE6F8DE9EDF
+:107F0000918E3ADDBFC1F149E1B83A0D1CD77CC171
+:107F1000701439E4B3178E62C7FD4F0AC7428DE96A
+:107F2000AFE5FC3A5767E766E71A42A889DE9A4B45
+:107F3000EF7B29AF7F995E357A9D2B13D38FDF4579
+:107F40004DB0FEB40DFBFB1BFE7CEFBBD762A22A3B
+:107F5000E8A82B90789DB75BEFC0396F56EFA63934
+:107F6000BE0F675D7D12ABD774DFFFD0C7F0F28D17
+:107F7000CBAB09F8D3D4574F796E6D975FE0DFFB39
+:107F80000C8A8E38376F5B75BE9F155C72069BEF4F
+:107F90001B975F4F20AE2BE7A6FEBEDD413F83BFA0
+:107FA000450B639D784CEFFFBB349F149EE14978ED
+:107FB000AE413C4969F0546BC1A3B3BC604BF0F3D4
+:107FC00081A724C3A25BFFF8D9CAE126172E413E40
+:107FD00092389D5A60FF96A2BF95FF68D13E5FF828
+:107FE000C383A4EF73195F0C7D170D92BEC55C0EA1
+:107FF0005AF4CF179E5B0709CF7516BF05C348AF6C
+:10800000CF0B9EAF0C129E6316BD8CCF173FAD49B0
+:10801000FEEF1F9EBF70B8F333581CA4A5849D27A4
+:10802000F14991078B8481E5C257ECDC676B853E93
+:10803000679DCDBBCEBAAF74EBFC355F673A795A1A
+:10804000A924F2807EC71A583CE00DBE3FF9755551
+:108050005326C6E75DF3B404F765F617B7F9EF5595
+:10806000CE73B903C9F1A40C96FFB931EA7C6FF95C
+:108070008A0C571D9989FD2CFCA51BEFAF056F617C
+:1080800048620E026F145F5945FDEC1B3E6B7CA5E8
+:1080900093BBA1E22BA60F0D5F03C9FB5786882F68
+:1080A0004B5EFF5AF1950FF89AFE37FE1A2CBE165A
+:1080B000FD4D1E8784AF5B872A8FDCAFFD6BC5D774
+:1080C00060E5D1BD6FA3FBBB507FDF17F8ACF1E7D4
+:1080D0009EFFD3E2D11A6F659A7D5E3A7C0E0487CB
+:1080E00075FDD03748BCBAF79F5F345E5DF37F6A99
+:1080F000BCF2F1868CD701E0B0AEF220E5DBF2EB0A
+:10810000DAD4D4DF111D97C9BEE3365EA83D321F15
+:10811000F2C77F27617EFAC89E391BECF540E33237
+:1081200099BF7DA472F606889F9E8B6460EDD9513D
+:1081300031F4F36990575EC4DE738F7F84E3CB9391
+:10814000996DC57FF380AE47238BFB954752695BE2
+:1081500017E68D6CF495FAE2FB0831B64F833CC408
+:1081600082D47058744E37EF50E97B34F2F890F4B3
+:10817000CF40EBFD0FFF9841EA9F04F6CB25C9BF26
+:10818000BB7319E0B34D64F570C7E156017CD78D20
+:1081900060A7E52BF2F7029DEECE64F9C30ED5D8A9
+:1081A00000F913CFE2050F6452BA1D5D9A2DD8CFA6
+:1081B0005FCEC964FBAF19AB52EFBB16723EE87DD0
+:1081C0005F20E353F07798F75BBA8A7D7F8CC8E134
+:1081D000518B6CE74ED7BB9EF7A1476600E1389AFA
+:1081E000E6DCFF02FEFEF225FDBF4F6AD9F77D28CF
+:1081F000DF8DB29F7B4DF219978F33FEE8D24C7A18
+:108200007D43887EE73EE0A3097E766E4826455092
+:108210007F658D932B934E95E2FD5DC5180579CD55
+:1082200014E3DC9C393DFD38E9F06AADC79A074498
+:1082300011BED333576371C46961426641FCD013E8
+:10824000BA9BE50F191FE4F03AC499B5198946D8CD
+:10825000F7CA749D36783BFEEFECFF06CF3B8E8865
+:108260003A9E6F77E16120FDD094C9F2C9B952748A
+:108270009317F226AB8594DFB1DB98C9FEDED1A45B
+:10828000CC64BD14CE336E675481EF5F2C9359FEDE
+:108290008B90E8A885B6F927717E73BF972BB17ACA
+:1082A00023F22693E7B67DEB46A5929F5F70399D3A
+:1082B0009459E2A8735C12B95B01F95CB260A162E7
+:1082C000F8E1B981E32FE570B4A9D15153FCBD7831
+:1082D0004AAB87387E3A8E459BE0BB1FABEB05ACC3
+:1082E0001328DDC8F86EF5C683E2067ADDCBE56FAC
+:1082F00021D0C036DE77395DDBF6F94603FC6DC967
+:10830000FC0D1D98C271F36E82F99027B79F6E81A4
+:108310007C48B74078FEE4C64AA86BE8E6F56D2FC6
+:10832000D3E78D80BF397928DFE3367E5807FAB965
+:108330004325785EE6775B3C09384F60F14B524F3E
+:108340006C3CDF00F5C38FA89D13816FF29A6AEF32
+:108350004B953F7D89D3E18FFE48562A3FD0BA5ACC
+:10836000FADCEAB748369454FD1757BAEC1A877B03
+:1083700098A7F30C4991C74CF261A27F3FED975C3F
+:108380008FFFC295E75D722C759CF1579C7FDB12C5
+:1083900015EBD16E991E3C8762C163E12BD76478DF
+:1083A0005AB64472E8DBD50B325C7E0FC3EB0D1E70
+:1083B000E35158C723FB7E3A11CF51B9EC834F8A62
+:1083C000AAF0FC0ED2A9809E785F32F0FA4683F3C1
+:1083D000EFBCBC41A2DBA783FDAC9752CAD51F39C5
+:1083E000FFBCB1E296A5087F4CD201FE13AB865DBF
+:1083F0005F06FA65851282EFA69F88DD9B799B6DEB
+:10840000FD49BFC605D7AFAB6EE9D76E2D5FE1A4BE
+:108410005B9BCAFC02F33A268777521E9D85FCD5EA
+:10842000BD7D269DFF482267CA56D69DC0DF995A5A
+:10843000CC7F7F5F8CEE9849F5CD2991E549CCAF93
+:1084400030BDB16467A41952A7A7EAAF78A99BF61B
+:10845000F30618DFFDB6BE7FFBE8E6A7713B9DFE85
+:10846000DE8C634485F7A375A9EDC1B7F50CFEF763
+:10847000C442A341BFDCB43175BFFF05CC4CE13928
+:10848000F517A92A557CF22A9DC1BB3A92FAFDAB99
+:10849000F44CF61CEC520A3C9F0B64703DA78F060F
+:1084A0003DBD3A0DBC1F060208EF3BCDF7DF04755A
+:1084B00020EFBBBE03FF4E80F1C5C100E3EF53FBCD
+:1084C000562A7940A71641077E783B3B3401F86D68
+:1084D0004DEC049E7739C0F1FCA62F3225301DE407
+:1084E00065D1DC3C4A978E55242418E9F5FF9501A7
+:1084F000E637E4F2782DB57FEF82FDA3AFBE8BFEA9
+:10850000871C1E7DE34456020575E0A744731DD603
+:1085100019EEF3B1BA52129A6EF7E3BFCCE138B557
+:108520007F68F45E1A71F9417DFCBF7835CEBB3FA0
+:108530004387BA94239552E7B514C893FB33F0FBF5
+:10854000B86EB94837FF50FDC053FB87E6070EB43D
+:10855000EE0D81A241F981E72A1FD9310DE4488D42
+:108560004F4AA57F2D3D7D94C7DFDDFC635DBFCA0B
+:10857000F9E8FD44FF70DDB1DB09CF4DB54E782C35
+:1085800079793FD1E45B0378229D13ED7E299933FD
+:108590007D003BCBF253E9E0DCEED213C07940879B
+:1085A0003BB9BEF96DFD23013B1DDCEB3F25F2FD20
+:1085B000C1A3AC2E776C644D459ED1CB9FDFFA9C56
+:1085C000F8D2B233EE71FEB3F3A165E706E2C3DC85
+:1085D00034799C4970D099BEBF46D655C8D74F0A4A
+:1085E00018AC4DF47970548B94F1BA51628C86F3C7
+:1085F0005FA7F6F9F0EF43995B3D89B15404DEDFE4
+:1086000077F504FB7A7EC5F974F5926CFCFCC4FB2B
+:1086100062687E3ED69D49F81DB7378EE5CC83F65D
+:10862000238745D0D0E4A6BA3512ACEF8D00DB77B6
+:10863000AEDEF83AFA8343E5F3D5B54EFB7F155F1E
+:1086400047D2CF927BA601FFA4C3C36B1C0F4B2361
+:108650000BE7827EBE65A380FAF627300E5DC82D3B
+:108660007218F5368931FB48348A0F6A424EC022AF
+:10867000001FFFC0BF5B254754FB39B9DBB6DD3FA8
+:1086800017FC43B7BCACC8627C5C91C5ECC29BBE16
+:10869000E81F40DF5BFAF96DA1F6603EEDB231A054
+:1086A0005BDF094639B5D6B391C345FDB467F1FB2D
+:1086B000C57C7DA4C7C56F62BCFAC780FF0A0DFDEB
+:1086C000029F87EA7DA88B7EDC877554965C59FEF5
+:1086D0008EFBFD6572D4E13766661539FC77B71FEE
+:1086E000F2377B91BAFF15595FACBDB836EBB3B129
+:1086F00017C3389FB9ED4652AE5BD8799013C73E89
+:108700009A9B4AAE239F100EB73CBFBFCFC7BE9BFC
+:108710007C4D26EA9DDEFD547E02F6CB6EB980FDCF
+:10872000147CF7E3917D3F9B0875BD27B6DF7F532F
+:108730002A7ACED299DF44BAF31DF1BCB50182F595
+:10874000DF84CEF7846D7CEBBDA4BC0C10BF5CB69F
+:10875000F24ADC4FBEB1F2EAD16B4AFBEE2BFAF4DF
+:1087600017A2FFB014E66DE4FBE91D9EAA7DA9F6F1
+:10877000811CAF7DE3C44EFF7EE9C6F266D8526F1E
+:10878000CAB8E64BD114F327F7351B53C7E31EE4F1
+:108790007A2AB9AF31E9BE86E2A37B9514289BD62D
+:1087A000BBAFE9363F9F7DCDEF48CFCF67A2FCA797
+:1087B00086EF7B167FA9D11D5752F84ED1FD8F0948
+:1087C000F223D2F7805FBE957ABFF6387FEF771B32
+:1087D00087A8AF8E39F733E9E4EF7B9F91FCB5A909
+:1087E0003DA3400FFC6EEFC76FDD0FEBD9EB437C71
+:1087F000BBC789E812DF5FF8906F2DFBDCA132FD6B
+:10880000FFBBBF1B817F37DB2D1F84C4AFBF8A3EF8
+:108810003FBE4F9C02DF596CDB9751956A9FB35E58
+:1088200017787CC919EF21DCBF5BCAF94DDFF774FB
+:10883000AD3D1EFD26D757561CE07F67313BBB641C
+:10884000C14215E23DB725E34D04372BFA65857B20
+:10885000E1FB17BFE4E7B9CCB59929CFC7FD86E3A3
+:1088600077A038C48A55CE38C19205FDDB9B938929
+:10887000D47559163FA79B6FA8F6A52D31B4BCD867
+:1088800040EB1CA10FCEBE2C25B55F8278C73212FB
+:1088900052E0BA84D44EFC3145E5C9DD8B119E5FB0
+:1088A0005A7FFFF8E37B27DAFD98FF0F11FE85A1C1
+:1088B00000800000000000001F8B08000000000086
+:1088C000000BDD7D0B7854459670DDBEFD4AD24924
+:1088D0003A9DEEBC091D020818620742001FD02114
+:1088E0004482B2DA810041519A87184948A2E2CA0B
+:1088F000FEBA438720467466C2AA8CBFE3B80D82D5
+:10890000EB286AA2D1418CD8A0F8D8D59DA0AE8B17
+:10891000B3E846C7415E4322A32BB3CB0CFF39A774
+:10892000AAD2F7DE744370C7FDF6FBE338D7BAB7B7
+:108930009EE77D4E9DAAB63915C63C8C7D5B73FBC8
+:108940005F4D628CFDABB579BCD3C1D859FC9B1E81
+:108950007DFECB3AC6221731F6E13A3B8BD8A01CFC
+:1089600036558563D4FB53AA8931E8E85FE1C14AF3
+:10897000190B2D50C33B94C1F5B2705CACB7785E57
+:108980006A30463FF2B9A04665113BA3BFB3F06F12
+:10899000CD9C245DF922A753F4D39A182C62EC885D
+:1089A0001CF7513EEE91307F2FFBBB488C7B247C23
+:1089B000EE716F7E04C61D131DE78666FDB8BD2CE3
+:1089C000B48AB9619C70A2734701C3FF8CD8264456
+:1089D000DBEF759A08AEEC48A689653076876C1B8C
+:1089E00067BC0F057C8DF56BCC7E8B161FB7A77A05
+:1089F00069FEB25C33473F4F6F8A938FCB9CF981FE
+:108A000064C68E6E4BF4133CA6258747C13C2BED04
+:108A10002CE480793EF8E4C59FB1118C2D13F8AF9A
+:108A2000097C6D41781C35F5DF938CEBFAC0E4DCF2
+:108A30000143951DF45BB4F0BB2B85C3EFE8F673DF
+:108A4000C3EFAE143ECF7955FAF9CD3F98A82B1B52
+:108A5000D7FBEF7F7BEF04ECF7DFFFF63B8BB6FF36
+:108A600005A77359243D5A5E52ABF8C34583C77DB1
+:108A700029D53A24B8BF6480E392D3F9D4BF5B65AB
+:108A8000CD1D31D655EEB453FDF981728B07E0B997
+:108A9000FC6EC5A74017339CBC9FE566E6EF80F9E6
+:108AA00030B337BF1AE0EE696DBE2310A39FFF23DA
+:108AB000E0FD8D23901A8BCFE4F363410FB2DE0209
+:108AC00073D012ABFEC25A3D7C7B19AB8A35FF1FB7
+:108AD0003B395F0E951EE5F8C6FA439DC7DD820E51
+:108AE000D36D91DF33155E9C807ECA2E605C437D22
+:108AF000E3B8F73BF5F8338E7FF4CF6A5D2C38BCD2
+:108B000026F83F1800FA89F93D99BE7FC0DA1B7735
+:108B1000137F27F9762018B62FFF09A09DAD9C7D05
+:108B2000C75BF09A25A614D0FA16070E5412BB9D07
+:108B300079B018F1FE6DD5833F2985A91DB5065B77
+:108B400093A1C1D1F58A2FE41D3CCE07B84E90A366
+:108B50001FA13CBD08FB639C6E67C2FF65333646B0
+:108B6000F5D7A3506177D9BC3B347CEB5EFBDD3A93
+:108B700056CCD853D6C0FA64783FFAEEAFD73094CB
+:108B8000792C4CF3FEC2E2BB85E0CD18F1FDA16D5E
+:108B90008EAD9BA05E6A0A97938CF9F203E335725F
+:108BA000C2ECA4F250F1F3611CFC5CA89C92EB8C2B
+:108BB000370E409EE6377786A34D4965ACCBEABDBC
+:108BC00009D7D33F3BC1B90D5038D7EABF1AE1F3FB
+:108BD000C10193A9A580BA35239DCEE343B0826B32
+:108BE0000AEE1F578AF2C7E24F80A954431B36157D
+:108BF000E868862384FD957E38E719C4CF83B536AF
+:108C0000AF8AFD4DF37EAA4279EE5536EF7AE8AF92
+:108C1000AC67C45E37F43F7F8EE264D07EE6EC51F1
+:108C20009E5E585FD25AE8270747B8B7AAC2CCD889
+:108C3000D3F89F97323E6180C55C45965F6C9B0977
+:108C4000F2609CA7CBE40050AF4C7BB1CD0EFDDEB3
+:108C5000D312C872A6C1D236DFD7661FC658468661
+:108C6000BF67BA8FB1D99BEFAFB25F01EB7C54B451
+:108C70000F3DD0E6CF63EC5553B04081EFCD9B77ED
+:108C80005499015EEE4239FE2B6DFECB613D57DDFE
+:108C9000B2630DF4BF25ED9FAACC38EFC572FC9EE0
+:108CA000AA8A9130FFCB65F95FEC385F77926C0F41
+:108CB000F39DC298654474FEE62C18DF25CB9F54C3
+:108CC000CD84F13F2E6FAE30C3F8C7D2FEBDAD6884
+:108CD0002C6393E7943BFD50EEDBFC1F5549809FCE
+:108CE0002E06740AE53F6C3E4DF377AB26DE7FE837
+:108CF0008F34BFB2C5A171F85D617F6AAB8275AF79
+:108D0000B6F7BE85E4DAB43664CF4091A4703AB1C8
+:108D10005B9AFDB9003BCBAEF2482E4DA79DD36BBD
+:108D20005E643CEAB181F218288FD794B378B96BAE
+:108D30003D5B124BDE76BAB81EEE4A8CFDBD228D2D
+:108D4000CB03801BE993D483CCBF33865E1997E6AF
+:108D5000A07EF627B290DD15E5B76B8187A7005F8F
+:108D6000323B9FA7EC6790FE48E3729F85AE75216A
+:108D7000DFCCC12E60E9853E258474CD9A93C2A3D1
+:108D8000907658C43C0FF5876AA2F97A5465493544
+:108D9000F49791C8829DF0F4A4332A437B7FA723E4
+:108DA000DADF7B82EE2B0B03DBB1BFCACCEC92D6B1
+:108DB00082683F30EF0DF609BA799BA7B8F0FBDC6B
+:108DC000925B8B34F02CE2EB003AA07630CC33D3BC
+:108DD000810FBA7AC68DD804F3FB06E5AE27BAAE8A
+:108DE000B29EB91606F5B6B8843CF1F2F69E0A2E8C
+:108DF0007FFA6F4D0A6F43FEB4FB4A104FB2DD0D90
+:108E000002EE15F7CEF919D66BE8B1301BD45BD35F
+:108E1000599EC9CEA1171B4E5FC6C213356573C4D8
+:108E20008A72A7E1F4347A5F71EF7B56E453ECC7A2
+:108E30000BEB5A93E0CFF421DC5A63E39FB1169A0F
+:108E400047C3E934169AA87DCFE114EDDF4DDFCF9B
+:108E5000B7AE687F2A0BA79FAB3F2B7D1F80BB5906
+:108E6000C0DD1A7B9E1B04FD20BC4D1AFA9A2FE828
+:108E70000DA49F1FE5E1A16B8AB6A1BC8F8EBB9E9E
+:108E8000FAEF32031ED10EEC49F4A25D5C66E6F205
+:108E9000B3ACC7E50C2951FA907421F1DAE56A2EDA
+:108EA000A7F5562BCE6D0583E775BF9C97D0A79984
+:108EB0008B83EA52CDFC243F40FF5DA2FFD229C440
+:108EC0003FBFE0F4027C7303F22FDA2DB80E5F642B
+:108ED000FCDCE4C1F33F0DE4854FC02387FF5F391D
+:108EE000C2A80724DC06C33FF73CF8CCA7EF653DDA
+:108EF000FBACB8CE86387CFB802B85DA651E8CA453
+:108F000078A1DE19617774754C4CB80CF9628E89C2
+:108F1000A108C375A3BD5A36206FAF7C7706C8DBA6
+:108F2000CC8132C85B2FE26140FE46ECF668FD1F43
+:108F3000B9AE9CBD01E4B5DB06F82F223BD4CE349C
+:108F4000FEC4EE346EBF4D09B29876CBDFB9927590
+:108F500072ECFFAEAD60BF85F599D3B8DE9FD21B32
+:108F600052102F92AF8D72EA13C18F1F8BE7FFBC97
+:108F70009C52CE23A7AA859CE2EFF783998FF53206
+:108F80003222E315D089CBDE9D380AFD99DBB2543D
+:108F9000EF97C057F314DFB067A1DF1ABBF79E64E9
+:108FA0006F944E6A98DDEB40B883D17416F5FE9C41
+:108FB000042AE31FDA25A7DA154E87CC9B5A333EE5
+:108FC000BE1C92F3B82DCB4AE32DBB6F546A503BC5
+:108FD0003FA127AEB5459E658583F95C9661FEABE2
+:108FE0004DAAE6BB83EBB3B1C9FE6FD2D00E555884
+:108FF0002DCDC7602F3904DF19EDA587B16F0FFDA7
+:109000002F62233E3691739AD9660B33DE24847E19
+:109010006A660713FC1A313568E8C0EECAA3792CDA
+:109020005E081F2F01A6B4BF71C9971A3E7A07E7E1
+:10903000437A213209F934C1C57476DE623590A7CE
+:10904000A0DD9A69F3A19C013C111CF62730730244
+:109050008CFB363C116F95EAAD7B2D6EA403C5D712
+:109060004AD0DF2AFC5616417D73EDF424B25BD959
+:1090700099DB4756033C3C499C6EA11FBBE8C74E99
+:109080007422E4DEAFF3C76E43FD24E5A7C4033BBF
+:10909000A3527FF2FB7EA53ACF09E5FD9E8B4A5A8B
+:1090A00015BDFD83F650D47E4ABF6F16F0E3E4AAE7
+:1090B0008E880958A825E4997D27D4AF4CE26B1E11
+:1090C000E9E27A707F41484DC1FE46C13AE0D55B86
+:1090D00089C1A26647141F60E304117F1956783ACC
+:1090E000387FE0739F8BF3D99C748E942DE9BC9CE0
+:1090F00091C2EB1BE9ED49F17D95C2F1BBA99CCB77
+:109100000963BDE92EDEDF6A7BA82A6384D6BE0A26
+:1091100030A44333E37696DF25E8A482C3ABE2DED6
+:10912000C5A9A837BFED999FCA8AA272F41E25E887
+:10913000F441FD7B2C819F52BCE35F5486FE883551
+:109140002DE87441BDF4A4D8FEF24D621EE9E84F4B
+:1091500043BD9F087FC772FA62F2B317BAB83C4B9F
+:10916000C9AA21798E30F4A29FC2FA434E0DFE5255
+:10917000A798747E83E57431B5BF70BBA1248EDDE2
+:1091800050AAB31BE4B846FBE1D37559347FD9FE2E
+:1091900086AC8F2A99A6FE8DACF71EECEFC635B9CA
+:1091A000BA38513CBBE32E011FB4134231E765D5F9
+:1091B000BDFF14FCC49076FC237CFCE8B849C06871
+:1091C000D171FD2EFFDD2EE2A7CB9D872F864702B2
+:1091D000BC5749DF90DC07BDE4DFEA207D5485F20F
+:1091E0005AFA47C8F7CE54A4F1F20DAE491AFD2839
+:1091F000DA19E5D09F453CE3CF4E6EFFA51E94F6ED
+:1092000062A25751A2FA66B0BE127AC62017CF6783
+:109210005F03BD86B4FADFD8EF53AEEF6B5716C6C7
+:10922000A18FD1FF237665D9E541753CCACD2A854A
+:109230008D82C7E4997A3DDFEDE2FE47B72B49A75F
+:10924000E7E72ED6D78B60BD49F84C1A92BFA2D55E
+:10925000438A8AF28EF7D728E8A1E0D807562FC8AC
+:10926000DFFF1276D017E9FEB791AE3624A614A31D
+:109270007ED8FAA78A315B61DEFDEF5B7CDBB0BB99
+:109280005D9C3ECA17AD6935C37B4B87E2B4318D17
+:10929000DE5ADB79C90A58EF0792FEDD7C1D0DEE20
+:1092A0008875248C9BD3C0C7CFEBD8AB9835F22DF3
+:1092B000AF8ED73BE4B2E8F45EAF287F26FD0F16F1
+:1092C0006EA92CC5FA7EF326107D391D0AC583735D
+:1092D0009A01004007393EDEBFC31756961745D79F
+:1092E000D966AA2E42BDD09691E443BD30D61D3C2E
+:1092F0008CF4DF70281241304D3ED46346FBAEC281
+:10930000EDFF0ADFCB757A55670ECAD5A4437C7E84
+:10931000ED067A070B59D0F9362E6F55F60E437CC1
+:10932000A0EC80F132D68F21BD24EB67B8849EC8B3
+:1093300060C117C8AE626D8CF0C5681D19EB47930C
+:109340007D2FF119B5A3C64E403BAAF0818879194B
+:10935000B4DBFD58ECF8BC45E81158074BF744D78F
+:10936000118F2FA41E93F52C71FC6849EF4955B15C
+:10937000ED53D000F4BD7C91FB3A5C77C3062BB370
+:109380002951F857B803E9389F9C8EAD0AC246D2DE
+:10939000D706D7D34A2EACEFF65B985365F1E7DBDF
+:1093A000B0F6C54B5668FC2DE89FF0B1D5CAEAB4BB
+:1093B000FA54FA1317A773FD73A73B3002C76DDC8D
+:1093C000B5D98AF8BD65FBE7566DBC7BD03A8608F7
+:1093D0002FA58EFB290DB5F630AEB37C9199F057D1
+:1093E000BFC11A4679D4B0B33362427BFA6EE6430A
+:1093F0007E6FE8E87C2B07E092DBE09FA47AA3FD78
+:10940000E53684159C4F0610610FF979112BEA6738
+:10941000235DA33D8C76C95B099CDF4F943B420AD8
+:10942000C0EF8425D880F54E6427F942055178BFF6
+:10943000DD39EB1D05583AF9055B049F6DA66D59A2
+:1094400076A8D736CEEA433AAA700767A5037C5CB4
+:10945000E64017B64F7327FB5AA0ADD7C626907EBD
+:109460001E221C261BE861F2DD9C4FFE263D45DADC
+:109470007B13500E2D4D4F96F612C9A7B72C7C1DAD
+:109480001B189FEF3E977F01D1ABD345E3E63444F1
+:1094900014B4F78DE346E9C9BFF842E81BEC3C2B56
+:1094A000CAF57A2167CA176D577EABA1837A3064FB
+:1094B000905E72766E55D00F84EF2D956EAACF6CAC
+:1094C000286776F2FD887AF87E9346AEC875C49018
+:1094D0002FB7217C1D877ADEE4F22542F427E76B63
+:1094E000C4E78FD2B91D77259805F4DE1A1AE385F3
+:1094F000FEDE1A9148FD497E37F2E78F049DE7D4DE
+:109500006E57306EE04EE276A39C9FACF745FA8C26
+:10951000F5389FC9553D0487D5B566C29B9C4FA5BC
+:10952000353012FDAF76D1DFBE859F597BA1FCD0CF
+:10953000AF0E103DAE6E57FCE417B41FB0CEC7F8A7
+:109540005CE8972AC663AFE62609DBF2D201D22394
+:109550005777F138C1EAAE4EF37247944E0B8EED59
+:10956000BB11E96C75878D2528883FBE5E239D82DF
+:109570007C21BA67212BED67817C0C913C65C1028F
+:10958000F447A4FCDD27EC4BE6E0EF9F10F396FDDB
+:1095900046E56602D17BC1B109FBEC00CFD53EC5E3
+:1095A00007A612D8DBBC1EF41F21F9CBD808F4CBD8
+:1095B00064FF46F8FD5AC8D518787E3E3D861E9158
+:1095C0007AB5E0F1190C9F127F660177D9EF9E748E
+:1095D000BE9FB527DD4CFD6F28E7F1EB0D16AE3FC2
+:1095E00036B4D8C3C8D76FA75DF98E520C707259C4
+:1095F00023F8DC6F5AD680DFF7E7F079B499D68F7D
+:1096000069E6FAEBF574C25F0AE3F289CBA3875EE1
+:10961000E4F2A421E4203FB12158B382F61FDC0913
+:109620003EB4F759F04DEBFCE4283D18F1EB7D61B9
+:10963000AFD50BDFAFEEE07C10855B5847B720E776
+:1096400008EFFB5C723F2258807005FFBD05E30CFC
+:10965000D27F4F591C08257B07F36BBAF0DF27092F
+:10966000FFDD32C5FE17F5DFEBD7FE5336965765A3
+:10967000BD4B4FC92FE027EAF8EA84F0DB0E08BCA7
+:10968000FF41D04B7D6907F143FD97CDC4478E2A3A
+:109690002E4F1C87F47290B11F8BF53F40FD54266E
+:1096A000755CA9A23FFCF78AB395C59FF7CD4AF335
+:1096B0003F4F45BC74AAB42FC5CE80555F06704D90
+:1096C000103010F52C6E1EF73EF1142002F9D2DC9A
+:1096D0006C3D97FD7BBE7E59E42305F15D2F607DD7
+:1096E0006267C5D4DF613CF1A954DF2858FAF19DC7
+:1096F000F3FEE677D0FEC4F6E93ED4D3EED600D131
+:109700004FBF27C1877143B70A962DD0434BC71B64
+:109710002997E1BED833974C40B999E7E67C79ECBC
+:1097200045752DC267FD3F3C3F0DBFD7879574B48B
+:109730001B4F3CF5F77F46BD58B7BD093D0DD6FA26
+:10974000CCEB64879BC25BF9FBA752C9BE3CFAC451
+:10975000E66908F7D68E56FA7EEC89AD54DEF70F2F
+:10976000CFEFF94FB43702293EAC77ECC5CD3FFAC5
+:109770004FA4F39A141FAEA32168E6FBB692BE8DE8
+:1097800072AB732FF1A9A497AB51EF229C6AB9FC7D
+:1097900091F4FC85D8575A56E1684379F6C5A6E49A
+:1097A000BA58F144BF582FC65C488ED52A144F6B67
+:1097B00003AAC1B8465B229B82CFA4A2883517C6F4
+:1097C00059B8B8731AD93DA1CF5762FD79BB12D8E9
+:1097D000268ABF61F016EC7F2275C6C683183C0C42
+:1097E0007E32F4BEFD2CD8D71F5B309643FDE9ECEA
+:1097F000FF796DEFFE11E5688DBD77AFC71B7DDF8B
+:1098000026E234509FF44ED99AD8F1D02AB743D0EB
+:109810002DD79B395DD5795E921336DF288D5D3A61
+:10982000EC60F32610432CA7AEE74A5CC75563965D
+:109830004E24BAC0381FEA9F9083FA5F8D714AE0C8
+:10984000B3456ECE4F194EE6BE14C6AF3433B703E0
+:109850009F8C7D642139B283FA05FB83EC2AEFEB00
+:109860000B77A03DB2C512CC9E84FDB409BDB59D59
+:10987000CF1BDA3B71BF14FA735E3A81FAE9B1B8D3
+:10988000A87D88B79FB5BD4589CE1728351FF51629
+:10989000F657EA403D13AA25FC78ADB4AE635825CF
+:1098A0009BD65D7CC3F828FF1AE33B28CF701FF8D6
+:1098B0004E77F96DEE49D1A78CFB18E1F9327E871E
+:1098C000757FEBF6D3933D95AED32BF1EC957D0BE5
+:1098D0004F72FDFBEAE7246F1A918E71FCE0973A14
+:1098E000FDBB5CD2F12B9F131D2FDFC5F56FE3AEDF
+:1098F000122BD2EDF1757EF65B30401BC53EEB16A8
+:10990000A57725C5795E497062FCEEA4D037F50FC6
+:109910007C7E18F74747ECCA26BFFEE42B09B5D872
+:10992000CF7E9389E0B97FDBC55B5B15ED3CB93F2A
+:10993000007630916A23D8A9DC0E5EB119FDB3D54B
+:1099400075CC87FCDF68A09FC65D07885EA41D5CA0
+:10995000F0F8DC15DCFE4CF025A0FF3693DBA30C01
+:10996000EC51AC9F3633DC6225FA2A2943FADAB788
+:1099700070CF46D4E38D339913FBDF32CCFF4A2EF0
+:10998000AD476198CFB2C5D23EC30CEDB7547A9DB6
+:10999000004980DB76B27BD918ABD0732BC85E6EE2
+:1099A000CCBADE477C669407AFB490DDD5E84DA411
+:1099B000F95CBD4BB98DDB230EC6E7AF107D5E1D94
+:1099C000BE2C8CFBCABF17F093703C69E9B911E15A
+:1099D00071F2252044F87EF54C4EAF69333B488E3A
+:1099E000BCFDCA2CD2E3922E935FB6913E77999D2F
+:1099F0008A8FF4DA3C9B16AFED16AE97D2849E297F
+:109A00007C80E33722F82922F440C46DD5C75B9CE3
+:109A1000A162D4BBBF17F8273182F25DC893D52B62
+:109A200022C44F0D3B797F6E9BBFE4760DFDBA2BB0
+:109A3000B85E94717FDC07A88E212F7EE7E6FAB12D
+:109A4000E0F1659BD15EBE0AF08E2A25678C90A35B
+:109A5000401708B79CBA00D1C155EE9B7D6A01ED55
+:109A60001F909FD8DF6265B1E23C47851CF5A407D3
+:109A70004A31DEECC94C263BC7A3969B12B05D89E8
+:109A8000E2DBE6A5FD4DB2F3FA3DD9BE6D3A7E0F9D
+:109A9000949AA0DE918C648EE7F0AFCD73C7231F3C
+:109AA0007AA59FAEB3FB06FBDBDC6E9CD31E2A4679
+:109AB0003F44EE5F4838845B126BB5F2B34FC02170
+:109AC0003C96C7F3C1BE7750FCDA09E3A05FBFED57
+:109AD000B227B85FDF4AE31F74F3784625AC0FED79
+:109AE000364F61600DD7A7C9BE58F0B853E079DF93
+:109AF000C21B4BD0AF6CAC71F890DF1E7A55594643
+:109B0000F48CC141F4B7832B080F0CF080FCC082A9
+:109B1000DC2F6D6C0E8463D37B35F15F23F29F42A3
+:109B2000F44EF176A0F730A777AEFFA4DF8FF2B145
+:109B30003AC67EA8942F8DD6DED148C7921F1AA7A9
+:109B4000F58E46B80D559E9CB400FF23FF001C9077
+:109B50007F24BF24EFE67CB2A9C55B8EDF37553288
+:109B600067AB461F19FD259C27FA9D52AE8F7507DE
+:109B70000A3D1807304536621E8594C38DBBEF1B26
+:109B80001D2BCF4DCA61BB99CB377B3829DCAAA1ED
+:109B90002FDCDB4B9E404FCADB495A1B3B2E52E663
+:109BA000718878FDD0F222325097A3BCD996144622
+:109BB0007925E344C67EC778145D3C46FA2DB8BFCC
+:109BC00080F5E77A38BD547AB89CB85E3CE5FC2550
+:109BD000FD7B4DC1CF319F289EFE92EDFE52712B31
+:109BE000398ED4A346FCCBFD115C4F7551FC7AED48
+:109BF0007BB97C32D2E372C1275E5C2BD47B4EEC06
+:109C0000670DC62FEF87D59A75F96F6DA6CEBA5836
+:109C1000F12FB9BFC11E320F29BF6EEF3A9E47F533
+:109C20009CC8A7658BCDBA7C2A87CFDB82F1D3197C
+:109C3000F6821295C6E571ACE469EC6BD4C3C5BB82
+:109C4000DAC7609E9227A0DF1FC9AC4DD4ED3F64F8
+:109C5000075DBA726E5D8EAEFEB0E611BAEFC3D785
+:109C60008ED37D2F084DD0950BDB2ED5D51FD53E3D
+:109C7000439F8FFBC855BAFA63C37375E54D2D1D1D
+:109C8000B588978B9FBA4ED76E86D9692E01B88E4C
+:109C9000EF58A6CF1333C033F5CF6A4C3A7CD2537A
+:109CA00040789D61D6E70B5FB24B0F0F4C8BC3FE24
+:109CB0008A99E86FDA9109E7CA632D66E66F7A65DB
+:109CC000FB82C1F4C0ECBDBE400C3F53D2B92C1B8B
+:109CD000F7B1A4FCB850FA8B374F497FF1BEC78368
+:109CE000DBBB1EB90FC3E16219804BADEF5C70B1F5
+:109CF0009C0F2E0CE092FCFDE162EC6F7D5223E59F
+:109D0000037F84058D7DDC2BF84896178452B91E9D
+:109D10000ACC3B8F1DCDE3C0411BDF9F347EB7676C
+:109D200070B9361AE640F019225F7F26F070281EBF
+:109D30005FAFFD7A7F26CAEF2A467EB3B3B9E56BE3
+:109D4000D45B4BCC1186F4FF9058CF169117FAC80C
+:109D50003A27F5F3A8D87F7C6C9D97DE3FBE6E0C4A
+:109D60003DC3EB7CF47EDBBA29F4DC0EF61C3E9F8F
+:109D70005C5745CFA7D605A8DED3EB6AE9B9735D7A
+:109D800090CF6B10BE5819D93981F498F1D2A52122
+:109D9000754878626A5E4C7D19B71F75F139F3C852
+:109DA000D71E5A34FB4D0DFF666524BB0F630EE3CF
+:109DB000643619F733CFD7FEBB75B5B3DF1C3574E6
+:109DC0003E92F4C4CEA48F8EC5D741913FF9BB8794
+:109DD000CF6E0A15C5875794CE62C3A9C67E3207D7
+:109DE0009DF562B41934ED0F1AF8B826981AD36E9F
+:109DF000A811F4596BE3FBEF8B0CFCFD92F8FE52BB
+:109E000006D7779FC49133576798A43F6FA1FDC0D1
+:109E1000417CF7932B62C1777F8657C7C78B820639
+:109E2000BC1AFAF9C4D23ECC1783CFCED78F5C9F31
+:109E3000B1DDC3195C6EBDF8FF297F7E725332F924
+:109E40000F08378F66FD9FDC94541B2B2EF35A06A8
+:109E5000DF0705EB9C15B8C8D40F59D1561CC3BCFD
+:109E60007C9F77A413E343320F203EBD9A298E4492
+:109E7000305407C315F0E1B51642FFE68171226642
+:109E80001CC7678AEA59CCA9619A731EEA607A8076
+:109E9000F6212BE5EFF4E6D0BEFF05D213531F1BCE
+:109EA00075AE7DBA41ED2F50CEECF881E58CE473B0
+:109EB00076E6C151B1F4642D8E7D29AC63CBD4FB21
+:109EC00049CE9CA7DF0B855FADDA4BFBD64386DF1F
+:109ED0002EF790E2526BED29C50CFCBAEF12F83365
+:109EE0003483F1F3589F2584D1CE3F20E6098EFFBD
+:109EF00025DCAF6E9E8CCF7FCE0A7C9801ED975902
+:109F0000B99F383EC3FF119613C53EB035D3BA1181
+:109F10009FCCC9D7718958C74693371FD7F1A5E29F
+:109F20001B8B7E8AD314F6E1338545C6F3BCBB7028
+:109F300010FDB3F48B13BDE8DF268E66AC87E2E13B
+:109F4000BE048C9B5993FAFF7124F2FBEB268C30F4
+:109F5000B2E79D7CBECF3F924BFB2AE801A17C2853
+:109F6000C6F730F54D688743FB6B59F018CEEFA864
+:109F7000D31E32C1BC8A677FE1C27CA8E7BB67D031
+:109F80003E42E4293564C5730B3D27FEEE6AE8EFD7
+:109F9000921E0BC59B2F612AC9F37A337B00F926E9
+:109FA0001E3C8FFF75ECFCAE2B32B9DC93795BC69F
+:109FB000EF79E2FBF13879C48E4CAE17647E8C45A4
+:109FC000E6C778FCE7CC8FB118F2632CE600C37DBE
+:109FD00060CB407ECC6246F931D08F363FE6F88CBC
+:109FE000D8F3708B79584E27C5E93785DE1F1F716E
+:109FF000EE755A4E27E8F2ACA3ED1DF43E5E7ECE20
+:10A000007831FEF138F9496307FACF66A1746D3BE8
+:10A010002F9FF7C03879F4DD62C8F3897EE7F93DF8
+:10A020001BD2389DECCD72BA9742D74B59AF05E998
+:10A030007489C36DC1F85180F93AE9DC8ED9D2DF59
+:10A040002BF96E04D6337F8176B609242DDAD94BED
+:10A05000D65ABEE8D5C8A96ABFBECCB0BE46EE6E21
+:10A06000CA6234DFC4716328AFEF14F3A63ACF217C
+:10A070003717DB55BB59B3DE4371EC865B05FC0E2D
+:10A0800065C786DF7599DCEE88771EE2D6CC14DDD5
+:10A0900039BDDB9DE7969708DF60BAB67F231EDCEB
+:10A0A000F4FD7C70F6E0E61AC6D1CA159EBFFF1714
+:10A0B00087779A3857C5CF05580C79E89BB2B8FC1A
+:10A0C0008BCE9BE7A17FE40CDC9E8972D1EC1DADA9
+:10A0D0003D07D065F6274D80E72121778C70D99D0B
+:10A0E000C9ED37E3BABB443E7DA2CA9A3B35F0378F
+:10A0F000AEF73941E7B2FE060BDFBF82BF801DF02D
+:10A100007203E372EFE1CC11222F3CCD8CF270315F
+:10A11000EF82DDE07C8BF693249C07C14FC0DD0805
+:10A12000C700F3DE8879DBE783674796FF6184CB5E
+:10A13000D203895694FF37DAFBF7A38FDADB63FA91
+:10A1400078243C3F778C3CBC9DE1FEDB9897F7C1BF
+:10A1500033658A8FE751B09964EF28A15CF5ECC5AF
+:10A1600043B77736A604C7207F7C29F2AEA53EDA36
+:10A1700098736C34E6CF7B5DE5ABB23C1477F7A700
+:10A18000231DBD66E374F408F404E5A63D63B7A29D
+:10A190009E79302B5887F5641E1FF3F78FC63C84D9
+:10A1A0000B8513FC59908ECE07A7273219E1E75093
+:10A1B0004A6C3AF94D1C3A31F2079D2F2BFDE1F81C
+:10A1C00043C253EE5BC8F9D565713A944F093763C2
+:10A1D000FE505D9649D4E3F9880F660508CE7DC32D
+:10A1E000BE3E9C00733F64C8F792CF93421E9D6FA2
+:10A1F000FD12DE3F941C3E94187B7EA6ACA1E1E7E5
+:10A20000879A5FBD9C5F71ECF965660D0D7E01D686
+:10A21000FF59DA0FA0C700CFF58867B6A19FE4E326
+:10A220002157EC79960D799E41CB0FA16F257DB317
+:10A23000D0D23ADAAFCF4A8CB95FBF00FC27F47FA7
+:10A240008CFBF6727F1EE407ADB7C6DE7F633AE291
+:10A250007DA65877068BA4E17EE61E1BC5FF8DEB1D
+:10A26000BF42D011C0AB82E035A79FE2188746C736
+:10A27000960B15C6FA6D7C9C78E70BAECE528674B1
+:10A28000BE80950629FE576E774454C0C36D021FE9
+:10A29000D6DC553EB40FCBB3DE3B88EB04F89F18F9
+:10A2A00080A7269FEFD8BA779C232DF1E576BDFADB
+:10A2B0004259738CF5043DC11BB3347E50FD53EFFE
+:10A2C0003A476AF0359EF59AF8F9E87E93CE2FCE9C
+:10A2D0006417E41757639F988FE00A903E40FD8013
+:10A2E0007A67E3EEA925884CB433309FA73F3991B4
+:10A2F000E4686BCEA563BC1A7886B2A47DA9C6B10A
+:10A300001BFF7BF9FF51BB49D1D9AFD1FECDF45E24
+:10A31000E2A7DCF18F31F111F4F8EF213DE6F26FA5
+:10A32000C4A7117EA17B2F4FA3F30508BFE9D1FE7F
+:10A3300006F01F07CF1D1E7F3BF6D720CED1283257
+:10A340008F6F205E61761EB647E13D54BC248A784B
+:10A350001AD80D8F211D586D821F9983CE874BBB54
+:10A360008519EC1B3686FBB73764BDF7478CF76C55
+:10A370004CE12CBBF14709E4072E519C565C37D8C1
+:10A380001F9FFE1CEA0759E4D3BBC83F9476469250
+:10A390007A3669E8F394FEF2F9F2A9F7A13D06F3E3
+:10A3A000996172D0FEE63E585F36C88D1956FE2C74
+:10A3B0009F055405FDCD50F3BA7B615EDFB2338952
+:10A3C00057C0F3A78CC361CD81DFB9D01F9D61B6A3
+:10A3D0001CD3CA2D63BCE38DAC6437E151C43BBED2
+:10A3E00065737E7D31C2E57217C1A5F8959999DA3A
+:10A3F00078CB40BC43AC635E682997A7063927E554
+:10A4000099C9CEEF11617EE6756650DC88C33DA424
+:10A41000303394AF90657452A07CB9409282ED6164
+:10A42000DD5788275B16CC423983693C381E787F1C
+:10A4300059F86C9DEAF3E273BA1230F3798479DE4D
+:10A44000216BCEC3FA267BAFCACFE7C10C32B0BDB9
+:10A450001C8F9793457943CDA91B6FF20E8E633005
+:10A460004732D9BD5631AFA34E47C804EF6D8EC8F1
+:10A4700051CA4F154F63BCE33B532884F9D977AADF
+:10A48000619A6F128B447A303E61071098288EF0E3
+:10A4900007E403F06E1A719E09CE5391BB18E6399A
+:10A4A000FA152CA71BF491C7B186F29E3D01B3416A
+:10A4B0000F0515E49BCC5AE37BBD7EB2B343741EFB
+:10A4C000488904B2CEA69F3F5E638CD35866701451
+:10A4D000F7DFC2EDDE8F13793B4917E9D95CFF3610
+:10A4E000BAAC8CF25D32EC76B4DB4F261FC12397F9
+:10A4F000A837DA506FD82D7E8287D41FABBB6E652C
+:10A50000889FC65DD50CE5E86F14BEFF19BA41A15E
+:10A510003C05796F436D117B1F5AB2A6EC1134CE06
+:10A52000FC7782373440B9E63D363E02F54AA6074D
+:10A530002AF17E96D6F1CCB71ECAAD09C1675FC2BB
+:10A54000F51C50A99F26712E963167FD4EE87FEBD2
+:10A5500075C37C9B704915FD1B310FA8FF3EE6C4F7
+:10A56000BC9141747A06D607F87F02CB30EFA6156E
+:10A57000C15FDC01F5B3DF633EAA23BEA32F82785F
+:10A5800053043DE0FBE9F0BE49D04D61B7C2F7EF9F
+:10A59000DD36CA9F600733895FE6DBF9384DDDE5BC
+:10A5A000D74E827915F64C24321E09F531BF093396
+:10A5B0000C787E1D237FD9587F24D6F752B48AE7C2
+:10A5C000D5E458E9FE2326E4DC6403BF5D16A57FCD
+:10A5D000FA5E22CA4D421FE9F804FB01FFDC5FC6A8
+:10A5E000B7F3A99D9BF3838FC93FCEB797B2E81FFE
+:10A5F000F65B111D87E4EF4CF16DFFA2D994D73DB6
+:10A60000D91CD98B7C7D9978968827F2B51DE0B846
+:10A61000D0DCBCDF03EB495BCB7C2D38CA626F2BEF
+:10A62000F657CA022AC2B9CC795F2BCE6FEAE20391
+:10A63000E9485F4F6617123D5D6EF715260089B435
+:10A640004EF1F99CF0AA76B14270995F6B0F63FEF0
+:10A65000DAFC81FB7A82050B806F160615718E3E3F
+:10A6600058B058138F95797D0B6CE047C7DA77CED9
+:10A67000E67A5CB66F12E74EE4F76DD90E9E5F99ED
+:10A680007D655336E557F07C67E0FBDBB22745E597
+:10A69000088C4BF928F398DF82EB9A27F856F2FDE5
+:10A6A0007CFFED64B7CE0FE8EDCFDF281CDFA145BE
+:10A6B0000AD9830B6BCF6D9FB664CBFDDE3C27C5FB
+:10A6C000B799D4479CAEA4DC9E8B7A1CE56D15E847
+:10A6D0006D8D7DBCF8CE3369D42EF3C9D56787471D
+:10A6E000CFB93419CEB9348A732E4DBB5A2C1948C0
+:10A6F000EFE29C4B53F7E71BB5F97D124E83CFB9C0
+:10A70000F4535EE3026B782F9EFF59B00AD608F52A
+:10A71000DF10E722DEC4731113A274947C5D4284BF
+:10A72000E7CDF9297F2FCF99E4C37C9336D304CAB0
+:10A73000176A4B49F669F37336B53457623D99276A
+:10A7400024CFB52C88B31FFC9C906B5B149EAF1577
+:10A750005A6427787B5476507B4EDF5318A03CB95F
+:10A76000A66C2F8DB345C41130AF74223CC3608EEC
+:10A77000717CF1F646F900FD6DC0FE2A0A7D941F3A
+:10A780005391CAF3CC3CE98192DB8AA2FDD674F3E3
+:10A79000BCBC9AC0D76FF1FCDAEA5284A7519E4B39
+:10A7A000FA32CA75A0BF7D488FDF99B8DE89CAF733
+:10A7B000C0A29BA0BFBEF7AD943FC7EEF62B1668B4
+:10A7C000F7E2BB4E1F9EA7DB501EA8AEA4EF663A71
+:10A7D000EF9751CB2236F85EFA9E751BE6EDD5B1A8
+:10A7E000762BF65767D05BAB1C6F5A913F576DB70E
+:10A7F00044E99161BEA1AF10055DC3CE41710F92D6
+:10A800003F522E19E9988DD4CB9F12296F412E709B
+:10A810007DB598EB39F6A482F19FBEE423AAF09FA0
+:10A8200049DE4D9242CA20E72775BF4DF6CA3490E3
+:10A830000FE89F29582EA6FA5406F93906F3472F38
+:10A840006389445F83EC0431AFD28179737B48CA5A
+:10A85000C5F2298CE17D06122F300ED1B3DCAF9BFF
+:10A8600084F7F0C0F33231EE9D267F5144413CB174
+:10A87000B0A910ED8820D93B46FBA7CCDE9C6487AD
+:10A88000F54D61ED241727EF7F93E424E0F92CCAFE
+:10A8900099D798C4B3CF8E72A61213FF547CEAF1F5
+:10A8A00034CBF19019E1342BCB888F9019E13ADB4E
+:10A8B0003B084F744EC01F074F7E2947985E8E1489
+:10A8C000B033FC5CF27D6FDD817EEFF9EC900F3DE3
+:10A8D000C1AC1C929F7A7B245E5E5D418EE382F266
+:10A8E000EAFA2CDC4FB894F5AEDCA90CA68B93FBEE
+:10A8F000D7AA591AFA9174B95BE4D92BAF8BBCDD96
+:10A90000D264D27351BDC8F15F264A97225D69F0C7
+:10A910007FC5AE84880AF45622DA5F8AF43021AA11
+:10A9200017232687D70AE36E547C6D6A0CBC67B880
+:10A93000BCA4FF269AFC2AD953CC978E7806BC4F2C
+:10A9400043784DB177B49A619E87ADBE9FA3BF5245
+:10A95000CEBC84F772837EA970D498913F2BEC46CD
+:10A96000FCFA09EF95CE41EF4DDF07EFC311EF522F
+:10A970007F0CC1FE04BC2FCC89B15F180FEFC1EF73
+:10A98000897723BE25DF7726382B1C18D7ADE3F94E
+:10A99000C413DF1FD98AE58CD50574CEA533CDF756
+:10A9A000067D6FE6DF4B7BFC2ADE9F58B806BE4370
+:10A9B000B9B3205081E5A6B50AC9CB491F055BB1E3
+:10A9C0003CF26EFEBD647DF31B780F595388B7DFF0
+:10A9D0007D7423DD2711DE28DA97B75760B9A98D7A
+:10A9E000B7FF2AD91E42FFBAEC60B815DF8F7D8011
+:10A9F000CF43DA75D3059D752A2FBC41EDDA79BBBB
+:10AA00009BDFB227927C1276DA34B1CEE98FF175F2
+:10AA1000BA7F7B559517E8F0A6FE9005E9E0B0A94E
+:10AA2000A18CE4651C7FAB5C69CFC3E72C900B8CD9
+:10AA3000F00DF43982E79B6E83211ECBE17686CC44
+:10AA4000D3C47CF16A0DBE1ECBE17127592FC3C55B
+:10AA5000785EF1A3C964B7CA3CD2C8CF98827100AE
+:10AA60005C23E9D73879A5B30A9B495FCE1A2EF348
+:10AA7000497BCDCB60DC92B37FB832967FFD8418E2
+:10AA8000F788C87F97EFEBC20526F43F3A9178E844
+:10AA90001EB3DAF7D12EE94C63BA7B423A0B78B990
+:10AAA000F3D19A1FB7E5017C4DCDE6100AFD7C85F8
+:10AAB000EE3DB9A68745525306CF7F96994578DE7D
+:10AAC000039FFFCA56EBB64D1A3B7DBE141B978FF2
+:10AAD000223D5223F024E5C57C812FE0EFDDC8DF65
+:10AAE0000BECCD64172E12F2FD1616A638C52D06F6
+:10AAF000FEAE777CF399C984F1303D1FAF86E970D3
+:10AB0000BDD0FFF82700FFBA47929DA8E75777E826
+:10AB1000EBD53DF2FE416E5FE9F9BC4EF27958CFBC
+:10AB2000E76038703EFFD938DA7F91E7FA12ECFD22
+:10AB30009F855874BD03FADDC07F0978CE6F0CFA8B
+:10AB40002D269E5F28CA72DC53ED5C0F87400F0BE9
+:10AB50003F8744EDA943B3C3480F25827F251F9744
+:10AB6000087D3E485F5719FD9887883F268A928462
+:10AB7000BBD4CFD00FE967796E10F4F2FB7EF2EF11
+:10AB8000C1FFC4798ED3F3CB2605E47341D45F01B2
+:10AB9000BC7D8D7803796CE7718A7686F22CAEDD08
+:10ABA000EF5813D3EE074947FB0083EDFD88CE8EA7
+:10ABB00037E22B9E5D3F80AF04B09792D08F67C481
+:10ABC0001FFF88CF21E475809C76E4C690D3D67DA4
+:10ABD000BC5EFFD6048A17C8F8B8E437258FDBD5EA
+:10ABE000EF66F95DB9B8FF20FA3F74EB2CDAAFFEDF
+:10ABF00086F969BF1AF38D7263E44BE07EF5064D6A
+:10AC00009CF4505AECB8F5F05CCEEF4B72F9BAC632
+:10AC10007BFC5E1CEF8895C7C58F248A670ADF57C7
+:10AC2000B83897C7B9978867B9781E1179D8475C43
+:10AC3000FA78BAAC5721C6F9729DDDBE412357BCE4
+:10AC40003FB335A3BEF2148ABCF5359C5EFB5E496A
+:10AC5000DBAABDAFED9ADCF22508474FA1DF9A8D44
+:10AC6000719657B85E6834F75A31BFE41A77702A84
+:10AC70007E6FF432FF0BD88FB7D73A0FE0DC27F6A0
+:10AC8000E9FB2CDCDFE84BE04F39AF6B72AB97E0B0
+:10AC90007AFB6EED25F93050AEEE25FEBF2637402B
+:10ACA000E3F6CD97DF45F9C7BCCC847F582EF882F8
+:10ACB000E2BC31E2BA83E3B8FAFB679AACB1F7972A
+:10ACC000595EB22E3E7B43378F1BDE68671B73E1F4
+:10ACD000FB92EE4CF21FEA5242A39D14C7FBEFC554
+:10ACE0005DFB86F5D0BA3695F7E73F5A4AFBB814B4
+:10ACF000F759DDFD36C9B9D5924FBAF47C522FF021
+:10AD00007BBEFD0F635C7C08FCB32616FFBC8CFA8F
+:10AD1000C91285FF6D220FA9526DA8C0B8D0A91520
+:10AD20008CCEBFDEF6AE4AF474DBB30ADD0721ED4C
+:10AD3000B3D502BEF1D683E707BC1AF981E707BC99
+:10AD40001AFF0CCF0F68CB787E405B1FCF0F68BF18
+:10AD5000E3F901ED773C3FA02D97B0E5AD18676BA7
+:10AD60006A63CEB0979F27D0B6C7F304DA329E2726
+:10AD7000D0B6C7F304DAF229C6E178EA3195E2F4F5
+:10AD800078AE40DBFEE677276621DD7425F03C32A5
+:10AD900016F2F714015C5608B8E079036D7FC753CB
+:10ADA000AE7C8701DDADE85939079F97EC5AA5EBDA
+:10ADB000AF5E6D203A64ED5CEE36C33F243FD52292
+:10ADC00015E7F1ED2E85A517E0FDE106FDD9BD796A
+:10ADD000238A9E5BC2FAF7F54C13AF2D181C977FA0
+:10ADE0003957E421E6B01C6D9C264A070E5F04D754
+:10ADF000FF91EA8B450725ECA2548ACFBCA362ECF5
+:10AE0000817DC59AB75CAE68E2F70678D8B2F4F4F3
+:10AE100090E0D5D343D2183D3D24FBF4F4903A455D
+:10AE20004F0F69FE71E7846F7A959E3E8CF09D020C
+:10AE3000FF207C27E0CD9018578275629CF72F0584
+:10AE4000DF2F72C5BE8780EFB7ECF20A87973ED737
+:10AE5000D8CBA2F649E93BCDB4496B8C7B4A384A42
+:10AE60003B41C62F2731EEA7DBF1BC6521DA01DCBF
+:10AE70007F43FD8F7C7ED8CAFD36A420949337B1E2
+:10AE800020C9A39B0CFAFF66C74356D4FF83D60B99
+:10AE90001617DE1B685C2FDA514C134F32EA7FA580
+:10AEA0005B892417E372BBA55C0E9E2563C7AF0CBC
+:10AEB000455EFCDEE1B7E579681C662FD3C57B6390
+:10AEC000DA73721E122E727C1B6B56B3909EC718DB
+:10AED000ED2FBDBF2CFD6BEA54138F96FEB1F44FDE
+:10AEE0008C7056871790DD35D129FDE29EEBF1BDC0
+:10AEF000F4878D7EE8F9F6A5E68594DE9F1744ED8C
+:10AF0000C92BC4739E8817C1B27EFB6FD0F872C57F
+:10AF10003B0CC79BBBFB220FD2CB46A59919E6770A
+:10AF2000F055E84735F5A7F3F84B50B75FF5B6D2C3
+:10AF30004BF35EC0FCF7E0B351C4D31ABBDEA67D71
+:10AF4000D4C62E1E2F60BBF47831DAFBAB5887B520
+:10AF500040196CEF37B01EEACF68DF0FA293F3E819
+:10AF6000F18E3C79DF16CF1760422ED50978C5F3F4
+:10AF70000BCC08E0A9D1FB3B811FE6E54D8AE6D169
+:10AF800066B8C08F51310FC36B8D9527C5F0721510
+:10AF9000B049973B6A484E2C6F1B1497B0123FB5CF
+:10AFA0009F7B7DD20EB81F7C377C96E67979DC20BA
+:10AFB00071CE3B7EFC5CDA93AF3DFFD164E5E70EDA
+:10AFC00059B3FE7CFEDA3C933C3FA50E65FD83E160
+:10AFD000FAFDF2F265FE01C0EF2E2DFCE43E825C2C
+:10AFE000CFEF27F53C89F1433579A61DFD5AAF2BEC
+:10AFF000D882F5871DEC3DACA03C7378293FE4E492
+:10B00000AEA31FA3FF2ED7C758EF16BCDFB66E97AF
+:10B010004AFE60DDAE37C82E8AEFEFB50FDCA32005
+:10B02000F6377E126B5E32AFB9522D4AEDD5D8E9B4
+:10B030004B851F307978E0216C57FA615E0ACED7D4
+:10B0400032A283EEC5EABF83DBC16E95CD44F881A1
+:10B05000DEE37ADF61A67D077752484D413B6E29DA
+:10B06000E3F7D0F99A7D482AEAB0228AD366DCA1B8
+:10B0700006D0FEFE74CDF2343CAF9C91BC22AD10E4
+:10B080009ED36DFC5E9A0CC514E0E74E97A5E13D9A
+:10B090002037D8F8BE7CC15F27450A81DF5EB7F252
+:10B0A000FB46DD4941BABFA03F4DA5F91C5B074BEC
+:10B0B0001B85FB1EDF4CC47B0772CE3826E07CB2BA
+:10B0C000C5BD163FCAE3F7DC1C7FF6BB89E8AFAA13
+:10B0D000671D74BE5DD29FBB30B6BFB242C0A3D164
+:10B0E000C3F3DE4F0AFBF190D86F9579F06BC43E45
+:10B0F000E0A1D103F78379302FA431C19FBA10E3C7
+:10B10000110754CA6BFFC6E94F4D23BB99E7B3AF94
+:10B1100011F6C34991F7B966F68C4CF42FE2E54B72
+:10B120001FC8E376EF0F755FA5CC3F8D0B873433D7
+:10B13000335F42F72E05CE55EFD53FAB31E1795A5B
+:10B140007C8F9737DF97A7E8F2E21B312F1E5EADA9
+:10B1500079A53C939D235FBA11EF23D7E4D7A09F35
+:10B1600086EB6BC4FBC8E99ED213744F07F683F7D6
+:10B17000869DEFDEC815621E8D984F9EAE7DCFF97D
+:10B1800039DABF9BBE3F2DE0F6F43BA6AA6D31E64F
+:10B1900099378CCBA7711E7300F7252F8EF07B3F5C
+:10B1A000E3D593E7B8E3CDAB6B46EF8D386FCCCFEB
+:10B1B0008C355ECA304E2772BE5DAEDE9501BE9FF5
+:10B1C00037BA3A595376F6E7CFD5C8D7D9023F5D9B
+:10B1D00057F5E6D37D00B3B9FF1A0FCF65E66605D4
+:10B1E000E190E00A06D11E91F715E37DC63CCF231E
+:10B1F000744E7C47E1ACEACE1F0C86B395BECBFE05
+:10B20000A4DC39FA884A72E7E807821F99DFA19423
+:10B21000A1BEE27C7594F1B8EED176FEFB1FCB8225
+:10B22000A02B407E2CDD5E3F070F1FAFDC3171236A
+:10B230008A7F7C7F37C89FA5598C4D83E7B20DFA72
+:10B24000FDB16FD903A4E7563C60D467012BCAD97E
+:10B25000950FE9EBD7B107BE46FBA0CE60F76608B5
+:10B26000BD6BB47F670C13F66F192BBB90734E8FB9
+:10B2700030FFEC61A4FFF97EDB24B19F6EACFFBC14
+:10B2800097D3C36D3BFE60C59F048AD7EF319017FB
+:10B2900023A1DF13EB9CF45C32CC5F330CDA350D69
+:10B2A0000B2EC471FA0E70389F6A38B592E2D2B58F
+:10B2B000DC0EB0E1252BF09FB6EBEDE447DF8BF71A
+:10B2C0008C019C6D366E5F48BB4A556F57F1275B0A
+:10B2D000A6FE6E451AAECFFDCCAC2AF43F3CCF247F
+:10B2E000F9111F9BCAFD2528BF37553B689F78ABD6
+:10B2F00089DF4368B7F1FDB9F0D353F7613878645B
+:10B30000C7E619E86738BBF746302ED166E2FBAFD7
+:10B310006DD398B8C79A8FD7D45DDD89F3CAAF01D2
+:10B32000790FFD6D2AF0973835FD33612F350A5CB2
+:10B33000F4BD76D14FF1DEAB9FBF43E62AAC730478
+:10B34000C5BFC6314E3732BF847E1B43132F3A012F
+:10B35000FA8769CE3F8FEB50229614BA5F8FE2D8FE
+:10B360000DEB2319D7A3FEFC25DFAF95F373BF9E2A
+:10B370003D03E3FD529F5E8FF96D18071676EF22AD
+:10B3800026FFF87E41ADA0EB45C2DEBD3E89C37904
+:10B3900019F3D1F9ABEBEC2C05E3CBD757744CA2E6
+:10B3A000FBAFEB2D6968AFC8B8773CBCC78BCF3417
+:10B3B0003E99CCEFCB51FA476327C73006521ACDDE
+:10B3C000B737F6B36398E0E7D1C24E1BC9FCB8CFDC
+:10B3D000D2B8E722CAC7B725F27D35906F76C4EBA5
+:10B3E0007ED4E7B0EE5B5E4D88F07DE3B0B81787A2
+:10B3F00085683F664F26ED2BB80BFDB4EF7ED2D2A9
+:10B400009B4FF200E49702BA73CFB04FAE31E3FD29
+:10B410002039604741F9F82F0E5F83BFCFD238A2A1
+:10B420007725DE179EFEF8595E1ED77B18CBC31E0C
+:10B430004FBC96CA137A57AA509EF278D6B5D41E3E
+:10B440001D2820ACCAC7875F8BE7FC8E89F825F3DF
+:10B45000F5D23D418DBB2F3269E38325F95C4E1F48
+:10B460004BE0F58E15B0257311DE637A476B7F379D
+:10B47000C1932FED526E97C975CA762C2B76FFEFCC
+:10B480000B3D708BB8DF677A126B4BE0FB1521B474
+:10B49000AFDEECBE88E0F2C2309780572FDDDB28AC
+:10B4A000FB319EEF97E3AE42BD8D72DDA23F4FF4BC
+:10B4B0001BA12F609C0D344E91BF04EFE5699C9B4E
+:10B4C000578278037C9905BECCDC0FDC4A78C67EB7
+:10B4D000D38A498F4CC43CB137CF40FD82E8BC8D44
+:10B4E000F471588C734B2BDF67EA4F2B243A9A9EEA
+:10B4F000C4ED3F560AF003393645C0AD245F9CE3E6
+:10B5000019C043A642FDB70AF8E5F1FA17BADED32F
+:10B510003FD07A3578F263DEF19BBBC6129EA60C53
+:10B52000D0C1665D3FC75A0CEDA6F0BC94465721CA
+:10B53000B5BB57DCB32FEF2DC67605D06E7A45FF2D
+:10B5400044E407796F1B0B4D2367BD41488B817B1A
+:10B55000D83A787E0A1BE9E7F711CD9D532AD6E742
+:10B5600014EB736AEFA51BE0C38FFAF36B34F75249
+:10B57000CBF703701FE8AF6882E84FC7CFB1FA433B
+:10B58000BE88878F71F97F617CC8791AE0390067BE
+:10B59000C3FC243C918FA95D919E9FE43C87E59B71
+:10B5A00084BF6DE0E782EF399EC8EF5FFD37221F51
+:10B5B000D2ABA7E7D55D0526DC3F95EDDA3A5A0216
+:10B5C00028E765BCDBD6551D42FDD7D45D4E799B7F
+:10B5D000AB7FF5ECCB2168BFEAF987533099F6A829
+:10B5E000B93D03EDDC861DF7A4F871BFC41C4A41C8
+:10B5F000F97934AC56C53A0F181278907654A3D026
+:10B6000037C79EBEFF1A84C77FECB038518F363DD6
+:10B61000658BD8280E720BD95150FE9C97EFFD1AFE
+:10B62000FDD2A65D7A3B69D53F3C9CE1257A0AE5CF
+:10B630009AF08C0B8BE43278366EB7F8226E1E4F80
+:10B6400084615813EBDF88F333B6C7799C06BC37A7
+:10B6500075A84BF13CAFF13B4812B2C39ABAEE2742
+:10B66000BBAB491B67003CD4C5B1BB6ECDD7E75B14
+:10B670004BB8B0B087EC9AD65FFEACF87307DEA784
+:10B68000F94F294A91565FAE27389DEA58FEF7BB1D
+:10B69000BDF1F5EA49B40B6CDA761CAFDE5D0AED5C
+:10B6A00049B06EFE6CB04452D0CF6FD86AF181E6DB
+:10B6B000650DCF3EF124EE87B04F6C74FF41FDB3B2
+:10B6C000FB3FBE14CAF59D16F71C3E7D879211C53F
+:10B6D0004F9397DB27121FAB5EDC4FF70CE27BB476
+:10B6E0006B255EEA3BF75AD9F8C1F0ABE8D82B7E60
+:10B6F00077C1809F8ECFAFA4FB3C7FF99D15E9FAFF
+:10B70000E81E8565160C6E5FB7757F0AD21FC209E9
+:10B71000FD4B89A701BC0DC257E49ADDA5548FE209
+:10B720001AF1F036379FF178D0AF9E7D0E7F07B0CB
+:10B73000EE37361FAEBFEEB9DB53701D5F999B39F4
+:10B740007DFFE29E0C3F8C5B67096538E9C9DFD756
+:10B750003D7E07D1DDCD07EEC8E0BFA7E1CF364D76
+:10B76000A17566E3FA6E7A6C3EAD6F250B12DDD5DE
+:10B77000FD82C727BE15BFC760C4E769C11F5F6DE3
+:10B78000B3E18F64B0AF30111DF3083F50459EEF19
+:10B79000AD4C7B8F0558DC54FE56C407DE1FD0032A
+:10B7A000CCCE3471D9A6EDF7F6207E8E0DF367E28C
+:10B7B000BE1AC02124E0A5E0FDBAEA81CA4C8E1F62
+:10B7C000E635CBB832D8DF15F81EEBF758FC09C5C3
+:10B7D000BA7662BF9E8F2FE31330EF44DCF7FB2A6B
+:10B7E00023F6B9ADD1C31521DF580FD3D2573C7E14
+:10B7F000DF7E1FD1D5371F71BE690C5757D1F71E99
+:10B800004B048F163786F7D628240F6CBAFB9F0699
+:10B81000E862BB45F0B3FE3BCCD3AC68E1BB87E745
+:10B82000D5AE7CC8A6BB0F214A37D6E8FB82287F5D
+:10B830004A3FEA66C1FFC6F51AE5C11F0CF2803D1A
+:10B84000E619D2BD320D96F0938F22FF02BFA29F60
+:10B85000D9F0AC85FCFCE33BDFF8F83AA0F3E31D3C
+:10B86000926FF572D5C8B7752F4C62B1F8F6B8C3B0
+:10B87000C762F22DBC8FC9B78EE83E8D97FD7072FE
+:10B88000F5E63872356FB8F11C4B512AE6BA1F7BCA
+:10B89000BA7E38C5050C7095FEAC515EBE9CEF8D2E
+:10B8A000292F195E41A581A3849FA4C755CFACA6BB
+:10B8B0007106E856D2A5A4DB01BA1C945FA983A344
+:10B8C000F1FB17288F2645F16E590F7E0ADAB1AFCA
+:10B8D000A9F43B287D30978D00F7BE9D05B40F7A03
+:10B8E0008FB0F3FB9CFD2918D7BB47F815FD184F07
+:10B8F0004C8DBEEF4F10790381FE94348D5DF47949
+:10B90000B79A82765C6F38F6EFC9CA7B2A7BE3FC74
+:10B91000DEAC3CBF54A93AF2D7629CB69DEF4FAE65
+:10B9200068599882F18CBEEE42FA3DA19BDE057FFC
+:10B9300017E6DB27E39A21BF39BB2C7ABFE9111642
+:10B94000A2FDCAE5DDF5B45F688C83AC74D4A4E2D3
+:10B950007EA0310E7233E641611EF263FAF7AB301E
+:10B960003E827832D05310E9297B303DAD1C2EF653
+:10B970005F4B58896EFF55C8B54AB5E8A7689FF474
+:10B9800081DF8EF120A616FD1AF5E9B7E8C723037B
+:10B99000843C44A7F5C12332CF8AE85AD29DD17F97
+:10B9A000373E4FBCF469199E076A78F9DF8A7F0E2B
+:10B9B000CF132F7F32FA552CFFEA5FF3FF8D0DAEC8
+:10B9C0005FB1E78FE4AFF4EDB1D17CFAF6BC9D7FB7
+:10B9D000179677DB7C38DFBEF536FE7BD07B92E9AD
+:10B9E000DEE9BE613CCED6FADA77C5BDA4A7361033
+:10B9F000DEFE6E38BF2FF654F77F7D86F7AB9EEAEA
+:10BA0000B67931EED0B42789FCF0A6DD09744F7CFD
+:10BA1000DF6BDF9569E345FFDDF5348AF3167DC9F9
+:10BA2000AC16F35BFAD2B8BFD6F4EAD4275A0AD0E0
+:10BA30002EDD4BF71657BCFEA762943F7D2F70BBDF
+:10BA400002FCF3C77113F117C3BB7F6A998AE78DB4
+:10BA500018F9D553BD7FBA36E48805170E873E80A6
+:10BA600003AE0BE042F775C78347D7707E0FFFFF29
+:10BA70003E787C4DFE4243F764E2A3285C14FEFB53
+:10BA800023DDC961BB42EBE7EFF77C578C76D2F13F
+:10BA90008E16D2FBE75BF787FF6BE9E0FBAE5B89B5
+:10BAA0000C65DDA7FED7AE9BD3FFDAE15C3F19F949
+:10BAB00060309DFFEAAFA9FC5CB28FE66BE0FFFF50
+:10BAC00007ABA359F3008000000000001F8B0800A3
+:10BAD00000000000000BCD3C0B7814D5B9FFECCC76
+:10BAE0003E926CC22604084260F2244A1E0B791072
+:10BAF0001EA99B842008E206A4A2222EF8E015923B
+:10BB000008B6C66ACD622202F5B6516CAF6DD16F30
+:10BB10004141DADA6B8A41B1025D10115AAAAB8257
+:10BB2000A246BA52AB50031B41052ABDDEFFFFCF30
+:10BB30004CB233243CFCAEDFD7E423C733E7CC3927
+:10BB4000FFFB75CE18498599ADB9004DDB4EE587F1
+:10BB5000B1056806280648526D00FD004E6CFDFADE
+:10BB600090944CAD5D853480BAED710045D8FE31BE
+:10BB70002600124064DBA9129F13E01BFAB912A041
+:10BB8000A3119718D6DD37B71D9B3F2CB917A7D443
+:10BB9000BCF041FEAFB1ED78E1BDEC97A9FFE2BB8F
+:10BBA000433EC0B6D606BE565C2F120F3337213C3B
+:10BBB0009144F000EE5FF7F2E8A796E1FE8BDB3EE2
+:10BBC0009F4DFBD76C1D0532F62BFFF4EFFC30CDFB
+:10BBD000DF2479C4F3F88003E1AADC7E463CDF7EF3
+:10BBE0002A1FB0FD6C93149413B0FF807D7E80D625
+:10BBF000ED05EF118477F17F22DE3B6CB7E278C36D
+:10BC00005095E1EBC67B870DF208DFBDB3697E641A
+:10BC10007BBCCB9E46F0FD7B0844E17F21BCBDFF91
+:10BC2000B1FC3E3FDE007E86DB2A7B1DE908DFC3D8
+:10BC3000100CA9D83E0830B1D5792E3C3FA6C16280
+:10BC40007A0F42D01F4006F123272F9C0209D4AE61
+:10BC5000FA5CCEA7F7A74D4C4338FCAAC5BD5EA53C
+:10BC60001916A6C38AC1EEC02A840B14EFFCB5D8FE
+:10BC7000B70EAD71AFE215EE042801F881435BAF5A
+:10BC8000FF948912AED7B40CE1C2759AFA595C4D93
+:10BC9000B88EA25A82F67C6E3FA2F6A1FE57EFA1A3
+:10BCA0007D15A70D82DABBDFE03F27603F47EBE35E
+:10BCB0007EB199517DFC17033B5D0AEE1FE35620D0
+:10BCC0008028D921EA7D9C7F93EA62BAC442C0EF02
+:10BCD000725E3A9D7E4F83FD7AA793993E3ADDCE00
+:10BCE000A1138083DE57E8BF08FFE45521D2430546
+:10BCF000147F58E0237D23113DDD290E5CCFDAE768
+:10BD00000EF72A899FAB4A89F69E85FE2C31D01703
+:10BD1000E9E789C9EFA673D47A8CBF99CE974A5FB9
+:10BD20009D2F31308DF91C33D8E90E20FC0FAA82EB
+:10BD3000EE0F22DD25A99BBE3ADDCC7CF093EC14FE
+:10BD400077D3BFBB1DE7FA64383312BE41E2FA2B4A
+:10BD500020A71ED7A992C785FDB8FE89D238B79D06
+:10BD6000F44582A03412DBF2FE15807874A4DA1454
+:10BD70006ACB3A11A72878AF3CED00250ABF72487C
+:10BD800034F43B52B3F9FD4AC740C37B1D034B1D3E
+:10BD9000F4BCCA956698FF464C423E14D07B1326ED
+:10BDA000D2F85529971BDE9B7AB863CD1C6CAF95F2
+:10BDB000C245241C1D7B675510BD26A9230CF3B674
+:10BDC000A059217DEEAC9203EB901ED552B07F3E80
+:10BDD000D26D72CE68237C128C273C6B2C285A388B
+:10BDE000EF1A77B961FCDAD2498675AB3DD5867E0C
+:10BDF0004DC357A0F40518DB70169442B4E3C15646
+:10BE0000C3FB857BB618E627EC03391EDB11FBD597
+:10BE1000266A0BDB434924BEB6BE0EBFA50F8A704F
+:10BE2000D85B89E840C991FA57A86D70203DF0F9B8
+:10BE3000A918D122BF58CEFD8762024D08EF294BC9
+:10BE4000C04774B85B0EE4501B3BE88E7C48073853
+:10BE50009AF2B0DC87E0075FA78A7230FA8B401352
+:10BE6000F5AF3CDB2AFBC80E6F94FDB602E2FB94F3
+:10BE7000B8BF92DD6D9580F85EE3B47802E4B792C6
+:10BE80005AF39746C9D7673F845BBCB9E7EAEB8BA7
+:10BE900059E596345CBF39C5D3B283EC66C587B328
+:10BEA000E5F473E7814BE90CEB7449A7F7BC4583D4
+:10BEB000511EE5F8F10EB2EBB19532E30557590387
+:10BEC000EB719DE516778CA6FCEC5F5D13AC6B49BE
+:10BED000AFD7A409FB10FB175025843FB6AF4FCE58
+:10BEE000A3F77E26C17AE8DEEFD652603CB2D22CB0
+:10BEF000420F1457BF9BF3E8FD787EBFA454D011C6
+:10BF0000A6580259B864C241F76E2BF657E7EC7792
+:10BF10009119689B72D82F235DDA0E86CA24D4A5A6
+:10BF2000010F979FCC14F3210BFB6D39E3E3F2D89B
+:10BF30008FE558C8CE2C41B347766647D93339E4EC
+:10BF400027965C7EC500E8C1BEE96DC26909D4C20E
+:10BF5000EEFE9A3495E14A50C2407A9D705AE171E2
+:10BF600068C8B690FDD1D74F98A5BEBB94E0D86302
+:10BF7000852CDA5EF12C223C565DD1AEAE623C04DB
+:10BF8000DE00E1142FA2FA4FF4932A315609A7DC00
+:10BF90001C7F2E1CFFDC589CA8221E7DCBDD896EE9
+:10BFA0006A7F8F441FC374F7131D7E4A7F2EA3DE62
+:10BFB000DAD0781CDF4836518C0701E57A954D1BA5
+:10BFC000279382FDBE9236EE5FEB1D4F7C958DF37D
+:10BFD0000BD2BBE67B1C29DDEB7BD7AE0D35F748DA
+:10BFE0004F3BFBE55513AC01BB7431748DBB005D59
+:10BFF00013045DCFA2F5C77DEE72887D3E96D421F5
+:10C00000246FAB2D68053200F6BB7CD7935CC7CAA2
+:10C01000C13C7A3E37C133A00CE5AFCDE619720FB3
+:10C02000D9956D31EE75F85EF59D9F3DDE407A3D08
+:10C03000F59F39CD24378A276E24EE53E7FA8AED2F
+:10C0400041959CDB87E29D2E3A923CE39E3FB5747E
+:10C05000F7C93E2474D3D59389E3ABA2E8EC709082
+:10C06000FD12FD47D3DABC4CA7DB1C4CA7A59A4EAA
+:10C070003527428B05F5E1A46BC3F7491E4E6EB41C
+:10C0800002C54D6D3448FE32C7C17A05C9E1946AD4
+:10C09000D483BC372D5E8ACBDA513E3C241FF5D9C0
+:10C0A00086F54E8E7B37290FDF3B99AC24117D1628
+:10C0B000866D4CB79B1508DAD15EB625DF5659CE92
+:10C0C000FAA1F278ABB6CE6B599EFBD2D8EF8C7743
+:10C0D0007D8278499E31F237C37BE71779D04F7460
+:10C0E000FB8874AE2334937A9783E6724780E2CC60
+:10C0F000BAD265B9E41F9624660F00C4A36EBCC40F
+:10C10000FEB6AEE10BA6BBBEBE725A06B56F777F18
+:10C110007C86CAF640513C2C0FCA691B8FD7349CD1
+:10C12000643B8EE0A491DE742C13F6AEC50AB754BE
+:10C13000635BF3BFF22DD538BF06430CF617B0D3BF
+:10C14000B624CA1E42EBE75D76BF0079B77ACA5BB8
+:10C15000B16467AB25D70C401C8EA6BBAA95D1D87D
+:10C160008F71CD90B0DFB6EE8C97FBA9AE1916ECAF
+:10C17000EF4ABB498C0F74FDDCE206F87CDD5DA262
+:10C180009FE63A40FD0FD31EA95606623F5EC8C126
+:10C190006FD26AABFDB9245F4EA6CB891571AC1F77
+:10C1A000BDD1795EC3CB06BA9C332E4BB778C96E2E
+:10C1B000CC1476F1D8CA416B391ECA0C65D39E5B8C
+:10C1C000D344FCDA1F79538AFF5E45BD77201D9268
+:10C1D00033C063C1F9C92FA23FA2F91F878610FDA2
+:10C1E000E6BD181394901F8B9F78C546FE68AEACD1
+:10C1F00066935EBD3FCCB793E4E3787C88FBF31A8B
+:10C20000B6335C29592E61A75D9DB95E94CFF9D0F4
+:10C2100062A3F1F9A01C26BF614161A6B866A173B3
+:10C22000978DE2B2854F5B0F87A3FCEA22081F229D
+:10C230003DAD79D67A381CE57F81DE8F92AFC3168B
+:10C240000187A2D163AE1C9A6D13701D20B816270A
+:10C25000617C2F93BB08F5F7715C5493C379494A0D
+:10C260002C90DC2DBFECFD7C5F0F7EB0B511FD3E48
+:10C27000AADCA6C62DDCAEC135C9EE0C50C23637DD
+:10C28000AE53ABD9E592D0611B44BD7F42A36B9FF7
+:10C290002D128FEBF6A27B3C5ED025D733C2827085
+:10C2A0002C9EB66F1CF145E7E79571D01A93C47CBC
+:10C2B000716B7C71135F74FA233D0B157C6FD7593A
+:10C2C0007C2FAD27B9D0E92FE06D8B15F6A27373E3
+:10C2D0000CC74D66F8E3D205BC3A1E43D3CF0FFF1F
+:10C2E000D0F4EF06FEA1E9428FCD78E87AAC3FD7D3
+:10C2F000F5D88CB70EF7A5CB59C8763172A6DB9965
+:10C300005AF0E5D0FABA5DD1E9ACC3A9D3AB8DF24E
+:10C31000A11EE0541A5E32E0A3842A28898071E9C4
+:10C32000E9C28EB54E02E283D2B095E75D2A3EBAED
+:10C33000BDED0D2FDDCE9AF1D3EDAD8EA76E7775E5
+:10C340007CCBD090B03DC4349EF2AC2B4FFB0C7133
+:10C3500070392C30C4C9958E3B0DFD2AD73D86F926
+:10C3600057A52C338C4F52571AC627E73C62E85F1B
+:10C37000E3FEA5298E5F6B8AE37F63181F170E719A
+:10C38000DCFD7AE344509047DF3BD2C9F177B0D16E
+:10C39000C5FD9D8D29DCEE6A5459BF7737E670BB29
+:10C3A000A7D1CDCFFFDC58CAEDBE460FB7A1462FAF
+:10C3B000B766BB30F5F9EB15CA574A432D9564CAE9
+:10C3C0007764F87E928EF47BC312688A473A8D6A4E
+:10C3D00017F139CC37FBE35387EE25BFEEB2B9C96D
+:10C3E0001F36EF182DA93DC47309E8EF3C51F292B6
+:10C3F00030250C1E8A7BD03DF7245F2DE916964729
+:10C4000032FB807A37D301D664D4B79933257713BA
+:10C41000F0733F24711BF4E1F85405FCE4FFAB9D7D
+:10C420004AD09EC0A0791D08E70C0126D8699CFC63
+:10C4300077725F85E2D6EBE821C22B7B64F81E3E63
+:10C440009F51FA97339437DFE86CB5929CDCB0E7E4
+:10C450008163F7E23834FB8B493FBAE206FFFB9673
+:10C460004B891B5A28AE443A462477C843F14EA262
+:10C47000E28ECE07F4F6B674910F4C6DF2CB0948FC
+:10C48000CFCE3781E3385D1F11BF1504BFAE17D57E
+:10C490002E25382C81FCFD239534BF66BFCA74D18C
+:10C4A000F542D7033D0FD4F5A04A7EB689E69F3802
+:10C4B000089C4F8FEAF01D799EF034C59DA59D2DF7
+:10C4C0009594975D286F1C73BAF5159AB7BDD1C7BF
+:10C4D00072B4B57126B7C1C6F99A7CD6737F57631B
+:10C4E00003F77737FAB9DDD3B84293CF161EDFD7FB
+:10C4F000F838F75F6F0C6872BA919F8FCF10FEF714
+:10C500008B50E50092BF17D3451D071CE59C478063
+:10C5100022DA8B95939A9497453C65920FB35CE829
+:10C52000F200683724A4D78DE867C93FDC04FEBC5D
+:10C5300039D8CE9CD7621D2B7D7BB958E86CE6F8C4
+:10C54000C36C0F174090EDDDB9F65DC4FF17B2EF75
+:10C5500032E6ABE4AF74FBB718C2BC9E5DBED34DF0
+:10C56000F594EFCEAFB834BF0273687E57DE1DDBA3
+:10C570003E5BB65C38EF2E1A2CF8AAE7DD183F02B6
+:10C58000F9E54840E6B87A7E5A4B02E7DDA59D09F9
+:10C5900014072CD826333F30CF540622DFE6697CBF
+:10C5A000EB80E03BC49779E3E6715D6EFE1A233EB3
+:10C5B0000B9DD7F509AA3DC6693DE2590B0F7F4E89
+:10C5C000F5B95A8D5EFC1CE16968BF61D2AEA879ED
+:10C5D0003119F1C99FC49142C128A207C2EF0E923E
+:10C5E0009EED9759CF7A938BE3989F909C9F6A9C7E
+:10C5F000396917CAFDF1B38D9C7F25653CF2887FB0
+:10C60000DC77C7AFB559DEA1199C0F856DA43F3A01
+:10C61000FF96938D44B8975738029468478A5D0A0D
+:10C62000ED1F913C723CF1E323702F43FA956F7D2F
+:10C63000ED20E947B9C3C9E708884447343F47EFCD
+:10C64000F7353971DEA87D1E99C2F7E25DE1269AC1
+:10C65000A6FB1BDDFF8CEDE8947D5C17C8643D02F2
+:10C66000CC25BEC9B8783D32E79B4D946FA2413AC4
+:10C67000E99CC0F09E0C829B9E77D7B544BD69ECC7
+:10C68000598F9C80F02DD7F2C3D11F7B198E6A87FA
+:10C69000CA7268D7F2497B8A053C517474D97C1BF5
+:10C6A000A9FE097F8CE13AAF19BEC919C28EAB4908
+:10C6B000DEC94C5FA79A4D794395DCB1E1D7240FD1
+:10C6C0006D716E3BBE67B6B7BA7DEB2D6EAF739DD5
+:10C6D000EC318ED4DB3A8B38371859A91652FE4705
+:10C6E000F125E5857A9E689EEFCBAA989DD18FEBC8
+:10C6F000AB210FC1E5B29C574EEB1A3E3F6F9EA691
+:10C70000EF5FB7ADD83537AA0EB226433F5F505C16
+:10C710009F38BAF976B1FC2DEB9C69F03FFFE9F147
+:10C72000DA540C7324D4A13C2920E20810F1C42C63
+:10C7300008713B1B3AB9F5A124513B17DCDCDE063E
+:10C740005E6EBFCEF4AD26B989583BFB931E1F7BAE
+:10C75000E1EB5C928B63DF1BEB4A53BBFDABEE6FEF
+:10C760002FD5AFC6D2F9520FF2B041935BDD6EF711
+:10C77000CA1F93DD8E8C40FB807046368B73B148A8
+:10C780007C6C80CE0174FB007E63BCA8DB8BC2593D
+:10C79000EE37B85EB84FE6BAA5D97E5429228F0786
+:10C7A000C59D43F5517DFF260BCC2739DB88ED1F56
+:10C7B000108F3EB3C28A1A85CF760D8FF21BC60347
+:10C7C000E52F535D223FAC724032E57370F664EEA4
+:10C7D0000C340453291E45791E95E4F913D1DBFF6F
+:10C7E000D0B8443E7F20FB3314F9F79138B7810568
+:10C7F00052200BE9B1A54DF4F36E4F64FC6E82201C
+:10C80000F3F166085B09FF5B00D8EECE0195DB5BB8
+:10C81000C1C3FCC495E3F2D10EDDDEA68C5C857845
+:10C82000162475A6937EE68D7E2F4942B8F229FE26
+:10C8300075726D6605C5293A1E964C81C765999E2D
+:10C84000B709BE82A4D0AAD514176EB600C5859FBD
+:10C850008EBEE70E88F2AB2559150769DE73923854
+:10C860002FF46FB38BBA1A74F6F746C5E35F6756B9
+:10C870001E22BDFF07C1C6F9EF2A3E47AA7609DA94
+:10C88000C3F87E4C037C6F8837AF27FDF4B37D2C53
+:10C89000205A8A3AA11F4A795FEE7FF5D417D5CD89
+:10C8A000021F3FC5632559BE08ED5760435348F04A
+:10C8B0003F610FACE3B8A97E08D52FE63D69B7907C
+:10C8C0001F7F0FED309D9B7ED0E8E0F643CC6FA834
+:10C8D000FD1BE637D47E84F90DB57FC7FC86DADB15
+:10C8E0004F8F402102F861A6E77F33CE8347EF7672
+:10C8F00046E0119160664FE77DA73244FE91DFF676
+:10C90000F1037124075B6437C969DE6685EB10C7E4
+:10C91000B78E0AC869D174F5C565221CF95BDE7E45
+:10C92000746C11BDA7B8249C7F7CCBC9FE9C379941
+:10C93000E0EBA2C7369BA08706EF7389A155F4FEF2
+:10C94000739BD30942B42320E490F8D9431D0D60B2
+:10C9500019F3F1F50C113F5D6BEF2C8A3EDF040AF1
+:10C9600019A85EA9F9992AF96C423857ABDB8E26D3
+:10C97000B9CE7C83F6F3EF117A887C35D4252A353D
+:10C9800039D4DBBC6D362FE9D373DBDE993619E978
+:10C990003075CCA46259ED9E5F98D98FF7CD1B7D81
+:10C9A000E657AB93793E9F5BDC006BAB5C38EF26C0
+:10C9B000C78E57890437BB3EAA4AC4FE2D29D26EC2
+:10C9C0006AE7A8691392C80E4080F7B935A77C378B
+:10C9D00089D81477B58DFC7239295594DDAD74C4AE
+:10C9E000D1496A57BFCAD5D7D0BF2A659061FE2406
+:10C9F00035C3303E3967B8615CDF778ABBD0308F92
+:10CA0000F495E266C483F90EEB653E97C9DBFCC57D
+:10CA1000FB8B18FF1B8A08FF08D2CF8681C591D2F5
+:10CA200095BF584D6663F3CE043EA735C5A735DBE9
+:10CA30009EDAED517B8F4FBF84AD3DC675B5BDC449
+:10CA400075171B9FA2FD7894EC47C10BD7F1B9FB7A
+:10CA500073A3CF5CA6225EBE4C8C5BC9EE99E2D676
+:10CA60008816B79AE5A74B4E2555C8CD5E19280EF6
+:10CA7000D2E357B3FC003CA0F97FD15EAA9E4F7D64
+:10CA80004BF8AB7F90BEF78D966BAD35D5230A6C16
+:10CA9000E857A84EF85719D6D183B308874EFF8CB4
+:10CAA0006EB987DBD6BE3AB0889FFBE371CB5AAD37
+:10CAB0003EF1AB4CED9CBF66C7AB0393BBC7E1AE89
+:10CAC0008F0CF3E13E69B7A1DF9C66EC3F5CBE3B97
+:10CAD000FAFDDEECD0BC3577DA7C54977E4CD42955
+:10CAE000CDE33A3C553B633C642F95AD76CE876AE7
+:10CAF0005D1EAE9F28BDD44F74BB70830CF53DD92D
+:10CB0000B7F5DABA5376C680FC2DD67D0F6585E081
+:10CB1000F1BF28FCCC7B7D3CE08DDAA73553C47D8A
+:10CB2000C7125B7EFC15CE3BF612B889F4C712859E
+:10CB3000BDCD6FFBD462213F112BE425DF15B62458
+:10CB4000D17D97F9717E3A4FAE5B10EFA773A38248
+:10CB5000F4CE771CC8FA2D4FFB1E75A0DCBD6FB15B
+:10CB600018FC4E846C1DF67764FAA691DF99BC33ED
+:10CB70002668F916F8ECC804E1D72A84BECF26B996
+:10CB8000D1CFC5D0D4D43D08867332C29FFA679EF8
+:10CB9000BEF5ADC728EEDD2BF41F879DE67CF4A61D
+:10CBA000A87C14D608FD75E02FC5390B77B5D828B9
+:10CBB0004FFAAEF4BE3DD3D9ADDFC3CED5675DDF4E
+:10CBC000EB0E087D3FB1F5CBB7C8AE9F407F17ADE8
+:10CBD000EF5D7E51D3F3BAC765D647FDF9F1ADF2EB
+:10CBE000C4400FF47D4D930370651BCECD96949D8C
+:10CBF0009A467E6DC93685CF037BF3D7752B8CE7BC
+:10CC000064CF6DB7CF17E7C8028F88EE4FB77D9915
+:10CC1000549E2BDA657C5EDBA2D91D11C7A01FB51F
+:10CC200026931FAD96B8FE7660DB00BE9F714082F2
+:10CC3000A03A9297B8CE817C9B2E96A3E74E8AC7E6
+:10CC4000202547A17DA669FC9CAED585666C9B918D
+:10CC500045FC7AA76DEE010FA19795C1F2733DF8DF
+:10CC6000391E3C90E84DA57B0A539B847C1F48EC01
+:10CC7000ECA03AD281B23889CEA370FDE6E878EF15
+:10CC800080D59B5ACF78E9E79357C8DFC45D421E31
+:10CC9000ACD943E4A75F12F91CCBBF32F06196AB6D
+:10CCA0000510D8EDC17D6BDD418E4B1781C8EBCDF2
+:10CCB000F17CEDB8CF6CE417CCF967F9961D07E964
+:10CCC000DCE39C3A84495E2F547730E7BDBDD50F35
+:10CCD0004625790BB3A2EA7EE6F8BC2B0ED5E3A875
+:10CCE000F5717C2EF44AD97F1F5F84FDBBD6C7B98E
+:10CCF00028CF3EFAA4DD4F76F9E83A7B40C2F1A393
+:10CD0000499DED94771CDD94E7C615609E45FDDDD9
+:10CD1000B3E4D77F6B65B90030DE6B58527637DFEE
+:10CD2000FF5BB23E5EA27B389022C6F59C4F7E260A
+:10CD30009EE38205CF0FE4734EDDBF907ED0B9F441
+:10CD40009127623C14E41FDD33BD0FD5FB3A2C7FE5
+:10CD5000E0F37C90EF3B44E7F58B36C48FA4F801F9
+:10CD60007281F9367FDDE57CBEF973C53783F0AF9C
+:10CD70007CE69A0174AF6CC1DBFD80F0896C7D9E0E
+:10CD8000CFFFBAE3F49EE3BB135B33FA406E379DEB
+:10CD9000F43AE08AA7977989EFC5922ACE69A0DE96
+:10CDA0003388E4624B35D0BA2365716FB473651C68
+:10CDB000C7A566B9ABC91271608D5E6FE80B8E14A2
+:10CDC000D21F1F301D222B87AFA3F3B0E6AC24CDBA
+:10CDD0004F77664F8BBA975825B7D7BE4CF2B9C676
+:10CDE000CE75908E989ECFC11AB21279FE3C87F113
+:10CDF000DCBCB6E18CB19F8BF91DBE3FB2492DBCA6
+:10CE000013DBA51AFD57A77AEFCDC2F717B63EF28E
+:10CE1000C23EA6CB9A1FBE4FFBEE718AFACB3E41B3
+:10CE20003F73FC3FCF21EA1C006B797FFDF9A74FD0
+:10CE3000BCCBE7AB9F6E1E9E2DCE8D439FFC3A8DE3
+:10CE4000CF8B0FDD8BEDA63D6F315FCCF09E73EE87
+:10CE500027498C6F0DE1D197CE77BD8F109CC80804
+:10CE6000CEDBE6AECA63FAE9E76F91A33DE7273A66
+:10CE70009CFAFA3A7CFAFAFABC27B3441E335BCB2D
+:10CE80000F8ED942C7F91CFD85E112D5F7BA9E274E
+:10CE900085F213A3E4E5BBAAA7DFA8D5430E5A96F3
+:10CEA000FDC046F7E45A575B7DD176EF12EBE85DA3
+:10CEB00071A00754577FE14AD86F21724A7F3AEF39
+:10CEC000D3FAA40CD81FA78127113C746F506B6153
+:10CED000A12F85EBE4B49E4CD71003DC6F2A77AB0F
+:10CEE000D45E29791571EF2BC0F23F01EA07131EBA
+:10CEF000164798CFC5F47B2E3312975F9386FB3588
+:10CF0000F783E514C7345B855EF8E7C471FEA6D3EA
+:10CF100049F733E0CA35F8976617A80AAE3353814C
+:10CF200015D624316F28D2F9C09EB9AF529CF0AE0D
+:10CF300052DF8FF67DCFF9589E64A1F82E104F393D
+:10CF4000E2FB6FFDB6F8AF38F703F09439517EAECF
+:10CF50007BCDC176DF5C8FB81D7CDC9F0761EB1752
+:10CF6000F8DEDF46FF6BFD4EE8C6EB6F63BEDA4CC2
+:10CF7000F9C14D890F14D3FBFA3D4CF37DBFA32EAD
+:10CF800027DF0B34DFFBBB167C9F91DD3A65F1D5C3
+:10CF90008AFA47FD28F2BF91441B48383FD24FA37D
+:10CFA000C731607A44ACDAFB9FABDC2FAA1CC9F511
+:10CFB0004838A5B23D1E6BF23745C32D220FFB4604
+:10CFC000CC2FEB540CFEA6A840ABDB7CAD725C7A98
+:10CFD000E569E5BCFEE8A16C61CF8AFA5AEA7B8A72
+:10CFE0000FD56CA13F4D1094053E224E18DB2557FE
+:10CFF0001E99F857ABF56BC99FA13C45121C7EBA30
+:10D00000E83876AB90AFB14A7007B5685DA181E2B0
+:10D010008A2DE8EF7438E88C306538CBC1185D3E56
+:10D0200071AD59386FB954CF798B83E2196C574978
+:10D030002186E37BD0C9AD47F3E315E0E6763C7883
+:10D04000B945F9E47622B4707B35B4723B0542C22F
+:10D05000EF5F116C627F06F7B9F8DC62D23C0BC55A
+:10D060001B45D7F79C2F546874EA9D0EA87025972E
+:10D070004E8709807A97D1033D06E7B0FD30D3C3D0
+:10D08000AC9F651096593FC93064509D40653DADD9
+:10D09000040FF7AB2E920EA5619FC2751A333D2A7D
+:10D0A0007B968BC91A3DFE950D2C1F3A9FEECF56ED
+:10D0B000F9B9CE2FD4AB14927F331FF5E745711524
+:10D0C00027E96AFA1DD9C3A7D3BDAAA2C28AA5645B
+:10D0D00092EFDE30663ADDAB2A1A5BF13C1D79DE59
+:10D0E000933D4EF40B2A0AAD6ECC5AA4B2E9E3711B
+:10D0F000BE4FBB970C33457C7D9716B7F896FDC0A5
+:10D10000ED423DF1A53ADD849F03837BAA7FCA19D6
+:10D11000E27C70C8C4E04E2BCE3BA4F8E664537C9E
+:10D12000E00826A848F7BB9655F1BDB5876C62BEEE
+:10D13000DD2EEAB03A5EF8DC1F83FD4D9B862F950D
+:10D14000D27BDF1FD7ADA5757DCBB2FCA4AFBECD22
+:10D15000925B70B262C04CD4CF8E9015A81EAAEF1D
+:10D16000939DEA5B9ACDE7BAD95C271BA4C5331D12
+:10D170009B860F27BEDC9FADDDC34A4E2B24BA2D04
+:10D180004BF5DE4FF323F142BEEED7F8D05BBB2167
+:10D19000DB735F76F1B9CF23FF4000F0FD9F65FBA5
+:10D1A0001EA0F5EAE2CEB27F3F3EE2EDE5E1B46ECD
+:10D1B00039959049B310EF260F046CEC07B4FBEAE5
+:10D1C000DA7955E4765C07E950E4F53591491B3589
+:10D1D000ABB384EC27AEFB5FBCAE2D3C6404BEF762
+:10D1E000D8F44336216783859C697668DBF6BDF702
+:10D1F0000E125D2F44E955DDF6335F7D80F4AB3BC5
+:10D20000E174D3F46E7DFAE552CE27C169B01BBA42
+:10D210009E8DD962E7B87AECD6CB6FA779656FB7E8
+:10D2200067105E57B687F91C2CB2EDDD41020E3D4A
+:10D23000DF38257D1BBF4BE7B49CC76D16E7B44BA9
+:10D24000A4FA57E2A9FF7BC9ED47F83FD5FC869EBB
+:10D2500017CFD7F05ABC77FD72AA8BCC5F73EB1453
+:10D26000BEC7131079838ABFA4FF5FC23E3E1F5F13
+:10D27000B4D19C4F74DA88FF8B5B4DF781281FA6D1
+:10D280007B0FD1F6BD877C787BB6764E9B0AA98C46
+:10D29000873CAB8FAF077B67CE771F07CFAB2C9F49
+:10D2A000E09569FF62A5E77AC273DDDFD3B03ECCBB
+:10D2B000D3F6263A3939DFB589FBC24F2C75BBA8A6
+:10D2C000AFE9E75A9495528AA33B7FC9F2AFBFA753
+:10D2D000EBEB8215E25E36ACE9CB3257B0C1EE2102
+:10D2E000BE166C18C0F905E6411CF7ADDD605F4164
+:10D2F000FDA60763FD7201D5933B2FA3BA4A538C59
+:10D30000F8CE89DC23DD132D4817758E33BA5DD72F
+:10D31000FCBA7EDFB62BFF89CFE67BCD5DE361C52E
+:10D32000906F3469F17311C1477160BD55E44F319D
+:10D3300002FE1D6F7E3F8EE2D8CD8A378EEAD2275D
+:10D34000F6A7F7811EE8A6B7C5E85EE03CE78CC506
+:10D35000EF4EC9381FBF8A1ED7EEA76BF2F9C7463A
+:10D360000FFCDDDACD0F1DAF2AF9D94A1BD5396E76
+:10D370000317D53D96EC7DAA89BEB759B212B8A263
+:10D380007082FE50BE70C4C2E7E063F616A6903C01
+:10D39000B669F68ECE85D528B92AA1A210CE2F1E49
+:10D3A0000C01FAFE28468D05352A2F8ECB4932F422
+:10D3B000E3DD9719DEEF539A6E1807BF27945BD20F
+:10D3C0001DBF267AAE30CC7F2861027F8F5316BAFC
+:10D3D00083EB4A7D278E348CDB51AEE99E037C21A2
+:10D3E000E29F52FC65BF0AF532C139360CF02B942E
+:10D3F000BB311DC6F8A834DCC27960CC7EC590D79D
+:10D40000DB2F5067BA7C98A6578361B0B00F667A5D
+:10D410001BEF432CD92B731CB7241503CFB4DEE9C3
+:10D42000ADEB9F4EF77E5E23DD07CC34D279A0CFE3
+:10D4300048E741F38D744EAD37D279688391AE6978
+:10D440007E231D33568C31CCCF6AA930F4873D7EC4
+:10D45000B561FEE5816986FEF08D371AE6E7B5CE47
+:10D46000358C176C59785EBE8F082E318C9BF95E17
+:10D47000B8E74726395498CEC5DAF7593AFFFDF890
+:10D480004BFC1F0BDE3E4189CA81FE26D2C7FF2F0F
+:10D49000FE2F18A69D23E8FCBF48BB7A95E687CDF2
+:10D4A000DF794D8D13F6E6F53D27F67BB0FF865A02
+:10D4B000684DA1B8498B0FBCFA798429EFD3F39456
+:10D4C0006B4B25D3397D8CE19CFE42F7DA8A4341D0
+:10D4D000437FC47EF17DD4C883EE57A82DFED823A8
+:10D4E000477F0F35FA0B76CBE7E49DFAFD383D6FA9
+:10D4F00082E627390F9DA5C34F4A50726E7D51CFEA
+:10D500004FCD79AB9EAF9EFBBD95884BEE967BCB06
+:10D510006345FEAAE7ADDF070F7F5776D560DFDAF8
+:10D520006168FF654B675F1AD7F359222C9D1B4733
+:10D5300088B0FCDDCC3BD33DB9FC3D2AD7BD174AB2
+:10D540006F4FA77BFE08BE2B5C22CA3FF4F3D2309C
+:10D55000DFEF68BDC3926B7921BEFBFA98CF86D00E
+:10D560007AFF334CC46F76192984FE67C02C0FD024
+:10D57000F351499EE768BEF97EB6B935DF1B6A6B89
+:10D580000C72ABB8DC7C6FC75C1F0C5B548E3BFD30
+:10D590003F92F89ECE6704DCE8EE78E5C40A2BC71C
+:10D5A0002BA0E5E3376BF4D7EB16B3347C0EE31214
+:10D5B000F3D1FFDEBCE535E6CBA2940EADDE51CF54
+:10D5C000F1F5AD839D23F91E9AA7D02DEA5C7A1D53
+:10D5D00063D0257D5F7221FC17A51C35D491E0D95D
+:10D5E000BE1775BEDD8DB758FFF04A518F3CBC3277
+:10D5F00095EBDFDDEB1FE77AD2CDF56F1AF4E296FB
+:10D6000086F70C7A30C7FF91613C9CDC69A5FA6112
+:10D61000F88581136E42FA1DDB6CE7EFA1510E3ADB
+:10D6200088AFFAFAE195C3C7F3779517C4F3338649
+:10D63000A3BD31C4FCD5F13CD47890FBE1C630B732
+:10D64000663CF53A85DEDA76420EDDCFEF9462DD98
+:10D65000541736D72FEEB6A89F901E3C9493AEC5B4
+:10D660006BF5055EE69FA857B46BDF97B66BDF9747
+:10D67000B66BDF8BB66BDF87B66BDF8146ACCE1542
+:10D6800054D76897C4BD9F5992E7C939B85FDA602B
+:10D690009F3387E2FE859DF90AEE5357109E2D2198
+:10D6A0009FF3FAF9FAD07309D38581FC3D919FEF7E
+:10D6B000871DB1F8F3E9FB9BC91BB3AEA33CF0484F
+:10D6C000ACFF384522953969D751DE77C426F4700E
+:10D6D000FAC6D8EB48EF3EC6C5083FFF4B92A82BD1
+:10D6E00039C336FA7E6A6AB26F504EB1B8F7C5DFF9
+:10D6F000CDE073924BBDCE19B18A3830A2C583E913
+:10D7000039E21C302347C4AD7A5B463CC7E7D3A956
+:10D7100065FD7C389BBF375963078A5F717FFEBE0A
+:10D7200046BF6762FEFE66E49FECFC9D845E0F2DA3
+:10D73000C949E375E8BB1CD2CBE49FC4B1DD82705C
+:10D7400068087DC7D305EF7EF15DE531AA2347D593
+:10D750009F4B72441D066E03C377408BF71E3E44F9
+:10D7600079D6FBC37C6388AE732D6A09F17571C2EB
+:10D770000EAE774DC951795F8497F145FBD34C7C50
+:10D780005AEC08737DEC42F5F0DEF03F767BE8174B
+:10D79000B95CFF55F3F93B3C6D5F84630AD15FC709
+:10D7A0005B87A37B9DF3CBBF5ED7D5FB9F3EF1503C
+:10D7B000B65697BFC5DB833FBD55A34BBBB5E73A14
+:10D7C000FAFD1A7FCFE1CF3000AADBDB63D14760DF
+:10D7D0005BAFD1E9D80D880FD7273C2388BF8BA733
+:10D7E00039F9FB737D7D5CC7F787F3ECB33AD5BBA2
+:10D7F00090F05F582FEAEEFA7844127CF5AF14757A
+:10D80000D0C5DBDF3B44FF1F8405CFE415727EAF3C
+:10D81000BD6FA633D297BF8B9A2B8B732BA4EFDDF2
+:10D82000C46773BDFDDBD235922ACE57236BCF0C74
+:10D83000A17B648BE9DE1A7D1FA6D5AFA0CD5897DA
+:10D84000427AF9A95E71EE7914F0B9965DF3237608
+:10D85000FDFDC18AE1FD634EEF4F893E2F687603DF
+:10D86000E7072CB87F9B9E279BEA286D2151EF6C20
+:10D870004BB1719C4CF10EF9273DDEB9EB4D51EFE8
+:10D88000BC2B4DC4D1041FF1573AB89BE3842EFF43
+:10D890002FB955A29FD3EA0BD0FEE05BCAFE4B1E08
+:10D8A0008AFCA5F38B3F5FADD503843F2CD6FC5F8C
+:10D8B00031AD43014E6E1FF68B45DABE183F72DD67
+:10D8C0006D34F89A04305ADD6CE56E431DE1FF00BB
+:10D8D00090CECABD504500000000000000000000CE
+:10D8E0001F8B080000000000000BFB51CFC0F003AD
+:10D8F0000917B1A1F26FA0F1B33851F9BF5951F92D
+:10D9000097D0F884B02E1303C30A46D2F420E39DC7
+:10D9100040FD0780F838109F6322DF1C103E210C69
+:10D92000F48F1803C34220DD0DA4AF00F11F207E49
+:10D9300004E44B8B30306801F1325106864420BD3F
+:10D940000688CB4520FA4E02E96651F2ECD4E3A1F9
+:10D95000CCCDA39832BC411A955FA3C2C0B05695F6
+:10D9600081E1931A84BF02499E5D9D81A15605C243
+:10D9700036956360E807AA59208DDD5C33A0FC046E
+:10D98000A0BCB83A840F00134DDDCB680300000043
+:10D9900000000000000000001F8B080000000000D5
+:10D9A000000BCD3D097855D599FF5DDEBEE42679A3
+:10D9B000819705B8090183067C09612DE24D8C1819
+:10D9C0006C8A2F88364E197DA0D56859223235B61B
+:10D9D000DABC4012C2A6416D8741A52F5A2D525A7A
+:10D9E000A3624B67D4792C1DD1B1355AAA76A49D78
+:10D9F000C8388E5A65E242AB558739FF7FCE4DEE6F
+:10DA0000BD7909A89DF98ACBE1DC7B96FFFCE7DFB5
+:10DA1000CF7FEE73CB3E80090027F1CFB900574B83
+:10DA2000009037548237D608118026CDAD6F2A0674
+:10DA3000F886123BAC57B1E763E5D8FD3A3E9F5CF0
+:10DA40000B610005DBE703C4F07FACDFFAE0BA311D
+:10DA500089207BA62CCDC2D21CDF2C9B5400AD129A
+:10DA6000DF6F999CE9BD5942CA35D0EF05FA73B210
+:10DA700004A0E5E86FA71E32EBECBF0208455E0F7D
+:10DA8000B0BFCC8259271580F7828BB3D230F278A1
+:10DA90006FB5769FA54E02F853EBCB530F4D1AFE90
+:10DAA000FE1B0A34F7960F7F3E0BD8A433101F4994
+:10DAB000777CEAD0BA07D71964489AC3FA03A43D21
+:10DAC00039ACDCB5ED2CB56C084EE73A00921CBFC2
+:10DAD0009FB39F2752932E60B50A29318FE052D908
+:10DAE0003F3301A829DB97EB763500C1E580B723EA
+:10DAF000F2978177C4FD12EDDE0BAEEB04D66FBD5D
+:10DB00008BD34B7B9E1C5B07C3E9C5DC0F138FA730
+:10DB1000BB1F37818FE631E9A8495E3AEABE9F8A8A
+:10DB20008EAE443A3AEBFF9E8E927FBD74D441E3B1
+:10DB3000FC95D1114037C717F4AB38FFD0735E4660
+:10DB400096F64A4867ACDA87708FE353C1B896CE31
+:10DB5000EBE5694C4C41ECE93398DC1AD7BFAC1EBD
+:10DB6000E11E7B74E19B58762EA9A93B9FAD2FBF88
+:10DB7000B1F7F90B581989A7A404DBAF3B4046A1C4
+:10DB8000C2C65B91AC66EB6BC7C1E6023C905C66BB
+:10DB90002471BD60008C01F83BB126005957593DF6
+:10DBA000447FCDB40E37A4393EA4939EE1FD475A7D
+:10DBB0007F08FB996D8AF1FF6B00D777AA7EB0963C
+:10DBC000CF9764FF20BE0B87E6A771F29B2C7540B0
+:10DBD000FCD8DFF7E15F08BFD7FFBFCC5700953E09
+:10DBE000940FA17A594B617BE8CD56593DB24285DD
+:10DBF0003493110555DD924B3FF5BE7402D4F5F216
+:10DC0000FD911A4243F0FD2748443FE3BFF55ACF48
+:10DC100006467227960663441F1A406ECEF0F57CC6
+:10DC2000B71509D9525F52232568BED8D3A5AC7F5A
+:10DC30007209D77B77D42FCEB6CA2B8F2409BC3973
+:10DC4000E903747526B215A70FB55E367CD3BE38CE
+:10DC50007DA89F933EF2D65AFAC167DFAF88691755
+:10DC60009C267D7CD1F9CC7D1DCE576D625F4B7DAE
+:10DC7000C0F8F6F6BAC519ED8C91F7B592F83D5299
+:10DC80000F462A43BFFCC1FD4C0E2FD9FE2883DB73
+:10DC90007B836DBF94B1331B7B46C18712B1AFD775
+:10DCA0001CD7D7A2E8AFE5B2AAAAC9389E1BC763A2
+:10DCB00074B6317A7B12183F9C40DA66F850BA2B62
+:10DCC000D258875288DD2F209059DD1735529B8816
+:10DCD0000E52B42F267C1E5DB6E15F8DF86D75681F
+:10DCE0004C4A56F87D2D6E82C38DF3317A57343607
+:10DCF0002043851A84B42F8C2D38FC4806272762D0
+:10DD0000FDDB363AE8D22B21D33E98F48A68E5F45D
+:10DD1000FAEDD3932FCEF996D8E13DED7E41557FB4
+:10DD2000DDA28746EEA7C2EBE6FE30245E8503CC7B
+:10DD300018DAA70D2ED8279DCDF475D1A590604F88
+:10DD400037E0AB3944A764CF6C28AAD490AE609773
+:10DD5000A4229CA61E85680EB5AB90741A47F636B1
+:10DD600003B653820695E6FB91E112F49734F697D9
+:10DD7000B271BF22F6F72B42AF4195EBB57E136E21
+:10DD8000D2B3EA509DADE39D9BD8FF189D242BA4F0
+:10DD9000D4FDD2F0F7F5A817995CAAC7E716B9B277
+:10DDA0007D900FA2B45FF5E2DDC1C75E9A3C9DD1C4
+:10DDB000475F4C01145BEB1EF318B56CFCE7CF9189
+:10DDC000521E49C0CBE05C24E07CD6C81D8774DAC3
+:10DDD00057EB213A5E74C19F2248C6C7F7FD5ACD62
+:10DDE000442F8BE6B986E060FFADB6AE8FFDF7C37A
+:10DDF000C17D29A2794CB856562A0447DF3C2985B3
+:10DE0000F31CFADD7FDDFA2506E7B35552CCA313E8
+:10DE1000BC2160F3F519EF4746F53BCCF975D010FE
+:10DE20009FCEF9CDFD081702E115FE9DE195CD9736
+:10DE3000AC19E85F8F783E26C5D6B3F9B2E6B74C89
+:10DE4000C0798A6599E0DD38CF2B2B8C7EE0E531F7
+:10DE500032E23328F83CCBDDED9DC8E0EC9C24C3D6
+:10DE6000BDECD1C6D2D1E559BB439EA95ADC90582E
+:10DE70007F3DA9552AA3F045CA90EB32C9BB672460
+:10DE8000AE273B928BB5525CDE21BB1D887A296E92
+:10DE9000D1ABCC5E7C4662EB7745381D67D7C6B9FF
+:10DEA0009DD83786E45740EC47D6B4C55990C10E8B
+:10DEB0001E711D6CA24C7673B6CCE183A37C7CD51D
+:10DEC0001C3F67F4F13788F13F6C92A00FE153E3F8
+:10DED0005EDC7F302A889EFD823E616D0ED54DB995
+:10DEE000EB298B7715B37DF44465D0755C5F92F6B2
+:10DEF0007933DBE322068ABF96BD674D377FAA9050
+:10DF00005D922D9F4826191C9BF75F0B3AB353FD7A
+:10DF1000D114507DEAD55EC4CF66A614F8FCBD804E
+:10DF2000F30718D9A27C0D30F9AAA37CD57BD33294
+:10DF3000ABAB751033D8AB901693FC8C640E444B8E
+:10DF4000DA54F6BC7D2910FD025A1116FCB6475F63
+:10DF5000301406576723905DD319A9A1F5B597D75B
+:10DF6000788BD1DEA957E9397CC2F061DA214C1EE9
+:10DF7000FACBC0C0F936E7432A88BC549B47F4E883
+:10DF8000D6F8FAF5EDA5909ECEDE67CFDC8FF327AD
+:10DF90006F81D8243E25C935D5A40B359194D0BFC7
+:10DFA0006BD1629B32D0DD764864C9336C744A7A97
+:10DFB000D789B72C375C88F8EDAC60F45F3C7C9C6B
+:10DFC00022E41F466FA9D8E28B4A32CC532CEB4493
+:10DFD0001F665DFFD04DF08FD47EA81DB3337371E3
+:10DFE000684342BC406D84D69703837F0CACE78ABC
+:10DFF000F58E81666A179DDDBD1FF9ACC0E8AD46A0
+:10E000005C7C3774E9F3B46F70B786F108066DE98C
+:10E01000C9DC21396104B99C782F26937C0CC9692D
+:10E02000CD6003847C7D5152D63A901F91855D1856
+:10E03000C09B5ABBA7A27F19869884EF43313569EC
+:10E04000953F59C0EA36FB0F8E94CE24D2E27C0174
+:10E05000DA7E6419ADACF90C1CEF0E06908FF9C98D
+:10E060005B4209D2177FF285A7E1647F92E3596989
+:10E07000DEBF0CEDEE1B157F6C13D2438CEB072F2C
+:10E08000FB07E55FD66CD5268FB30D7B3DD7A13757
+:10E090001628415A6FF65740E803A37ED29821F81C
+:10E0A00018640D4837DB6A55C0F982410E9709673D
+:10E0B000AEF2495A0682E318C2C1D0437084CB80C5
+:10E0C000FC3D06CF31073CC71CF01CB3C2D3E2E5D0
+:10E0D000EB75FAFDCB65E1F733BF17F5E00978DBA7
+:10E0E000A8438231C6915E096BBC6DD0DB47469573
+:10E0F000061AEDBFD3EF67FBF39E4D3FCC16759D1F
+:10E10000D9F525049FFD3D14119D505D8141FF759A
+:10E11000F96C133FFA575F617C77ED6117205F312F
+:10E12000FE55F0BD4BBCBD56F8B1CB51FF33BD7DA4
+:10E1300015C4C308DF3B2093BDFC0EBC109E6E913E
+:10E140008B77C86EA1C7D9865AF9176251F4ABD53F
+:10E1500060679F1226349874269DA47D8B01F9DD9B
+:10E16000414E6F49F0B6917DD1C5F5A3E9F77DBD6C
+:10E17000DBAEAFAFD96EAF5F0D8BC7207D5D7DA7E6
+:10E180000B526CDC6BADF607DB9F6FC91AC1770DC4
+:10E1900034776A41B2B31A711DCB3550D14F5BF958
+:10E1A000B37B662E63EBD921F4E85B4CAEEB16BD76
+:10E1B000715D24E536CA87AF6FBD145BF42569E451
+:10E1C000F56D70F52D42FB20B9D5457E1D38FDB5A6
+:10E1D000BD0AF96B967E04EF955DF6F59D6AFDCE5E
+:10E1E000F5328F85D67BDDAE65A437475A8F7B9796
+:10E1F00064A432E8B7874D7D28E48B49DF265F278A
+:10E200006B80DB7BBFF7A5D6B3F97E83F291F6BFB7
+:10E21000F96C1E47699E85E5A9FAFDDBE7ECF7EF8F
+:10E220009FB3DF6B428E3BFBADF4F6BB713F57AB48
+:10E23000C93A491EB2A3BDAE66A390A1C2B5AF3A1A
+:10E240008DA698A55DD769B63B2C959C56BB3A79AF
+:10E2500094F18E0B3BE3A93DF7B9FB91FF76BFBA72
+:10E2600008F5FB37FE49012F5BD7F13D2148237D9F
+:10E27000AA2937DA2BD731BA4A513D3DF3628B5D7B
+:10E28000C52896C6FFC64321B20FAE7BC493AA67CA
+:10E29000FDAFFBE97F4C038687E3EB06FEA510E9A3
+:10E2A00075B7C4FDBF64FFB48BD9F3EB54B8229E9D
+:10E2B000814E6485F3CBDB3F0F34A2DD27EDDA7F9F
+:10E2C000398DDBFB5517CA65B3DD47B28BE665EDCB
+:10E2D0000C7C9F7C504A4D92387C0D5387FBDD6F40
+:10E2E0003F2871F8F6B9523E846F578F3BC1DAADC3
+:10E2F000DEF52ED1ED790FFD388C7858BD4FB1F990
+:10E30000BBAB772969CF342A5FC51235A3C4F86D3A
+:10E3100095E0D7557B57921E58D5BBF95DE4D7D50C
+:10E32000FB5C36B9CEF0124B235E5F5262F5587F2C
+:10E33000F487619DA1EAADE8EEB0564EE32E73334B
+:10E34000BABA68B6BD1F8EFF61CEF0F1000628AEE6
+:10E35000B9BA77239F0FB8BE31F9F42DFC4BFE708C
+:10E36000BD3145B19F3B9C806767521C72576E461A
+:10E370003FCED41726BF7EE3C7277626D9BC6F3F92
+:10E38000F2879D4906FF8AFF797FE7B7D9BAE0494E
+:10E390009F867268F5EEDF84C182F75A85FB61C7FC
+:10E3A0001FFCE1033B18BF1CFFAD87ECBAE34FFC39
+:10E3B000D7789DADFBF8C31F8D41BB73ED13E78F7D
+:10E3C00045FA5AFBD879636114FF01E935E5B1EEEE
+:10E3D0006B8AF655DF27611006E071513AF6E7E0E7
+:10E3E0005E258DA1DB775EF6A43C0C3FABD9B396DE
+:10E3F0004ADCAF95A487B07E33C3F3AA3D1BDE553C
+:10E40000A665C277B2508E62C9D8268AFB7DF145D7
+:10E41000E75461E98AE9481F3040F2DFD96FF5110E
+:10E42000B6AF678FBC8F27E01337E27FF59E8D7CF8
+:10E430005EC73EBE837F999341FF0FDBC715DFDFC9
+:10E44000812FF7E6D2BE8FB48F2B1FBB6454FFCC55
+:10E450009407A7C26F93C4E13A5B31D628C8578F9F
+:10E46000FCE8811D11BEBFF50C21C77F7C623C0614
+:10E4700097DF700D5C8E7272E0098F762FEB73DD83
+:10E48000132F119F1D7FEC79B74E72128212D37B2E
+:10E49000C761F04F1FEAC15512AFACFE4128ED092C
+:10E4A0000FEDD3AA54439D1EA6E7AFD2F314A7FFE6
+:10E4B00055A9FD4BA40CFBB65B29E1723995477851
+:10E4C00059A9F7B9B5A07D3FA5D9B88FAF2E40BAED
+:10E4D0001B691FCDF56BB8FE5996FDFC01E7DB917A
+:10E4E000F8F3788F4795B286F6F7B8B00F56A7A421
+:10E4F000972003DF02ACE3F08E70FE68964E7AF848
+:10E5000081831ECCFEE6BA4FC5D7A75ECF67C3D7BF
+:10E510009D8A6EA31B136F6F7F9259DEA7859C584F
+:10E5200005C9BA8289C3F5950AF16461F110BC9DF1
+:10E53000BD0AC9F1B7772964A73BE5C2AA11FCF16E
+:10E540005F29DCFE58B56FFF34945F6F1FF8B9A0E8
+:10E55000434EE7ABF6BCEA4E0AF99FB2CA7F1C2FC6
+:10E56000C37EBC2CE05EFD78E6F156EF7937E378A8
+:10E570006FA9C65711FEB7FA5C906443BCD5AB6473
+:10E580008C6F1C505CB6386E6768E6CB5918DF0C90
+:10E59000FB755CF7FA75C64B49B4435E7001D981CF
+:10E5A0006AEC0D0F7BBF3EE4A773EFF5E1AB41B71B
+:10E5B000E8E976079ED4689CFC603512AFE2B1D7DB
+:10E5C00094CD1F7569B20D6E509345184FF955F1F2
+:10E5D0007FA938EE7368FF9D31D4FE39153A72D9A0
+:10E5E00078CF1952AC0D32C4A71CE3C7E729A05B52
+:10E5F000E9CC2893ADF1D5F0819B282ED102CD69CD
+:10E600008C134111F4DE6F19F7EE560DD26C7EA813
+:10E610002B93ADF1554F73B3E1617014ADD54AD072
+:10E62000341B69FE71CDB23DAE2DE65F23E209B029
+:10E630006BF7EEDD6CDC3A7C57827E0C8F573177BE
+:10E640008AEC98F3841CFC6761071F90E287D0CFA7
+:10E6500032F46D2ACA39A9749B8AF6C4C24FBAD55E
+:10E66000E5167A5C58DA5684F472F853A531135DD6
+:10E670002D51395DB5156F28C2FE877D371671277C
+:10E68000344AEB2C10EB3C34EE9A603F1B777FF161
+:10E69000355B2633B8EAA20A60BCA52EB26C4B05E6
+:10E6A0005B7FC11125E663F582A6A49A983A7C9E09
+:10E6B0009D28EF19FEEE453C32F87FD01AA5FA03EB
+:10E6C000AD3A95BB5ACBA8DCDD1AA3F77B5A67534A
+:10E6D000BDB7B58ECA475AE3F43CFC2D7F02E977FB
+:10E6E0006F6B233DFF696B82CA1A95F3DB42810F82
+:10E6F000CBBAE91C6C497B781DC6514CFC39F15DE5
+:10E70000CB282E87CE0D241DF13D56E572C589D745
+:10E71000969620D9A53B25B0E173A6CAEDC8B8806E
+:10E72000E3903771A1CACAF7EA4ACBC9EE81780CE7
+:10E73000E5F44E297E5B05E397A7C6CD8A5AE56EC0
+:10E74000249888AB7943F5F15D3C3E334BE5F2A963
+:10E750000EDA0E6531F88C4F40473A33D779A05A1C
+:10E760002F42B978A08DC1538EEF6528B3D0993967
+:10E77000DE5C011F0433CBE921BAE5FC1F9D5BB6CB
+:10E780000DE3C4CCF18C4DD2C9EAB6F5DBA69A7183
+:10E790006F9DE8D8A413C63F4F8D8BD030DC5F6CE3
+:10E7A0002AE6EF7D9CCE5BFADFA5F856740CD8E222
+:10E7B0008D1D4D32F9393B8EF2B8F489A6926D93D6
+:10E7C00059FB6A8637F4DB73169666252C74BD45B3
+:10E7D000D0D30E6F3C4B1B457F758A7666FD155F67
+:10E7E000E23B88E7BF9FF0937CA4E71DAED4652889
+:10E7F0001F5B8E7AF475129E37C493B86FF122F6C0
+:10E800009C8174A26EAD879616E4E70F2D37EBDB83
+:10E81000CEB0F0792866E7EB9D2DA3C7A54DB8775C
+:10E8200022DCA3C4654DB8CDFD3851B764E01A1899
+:10E830008E07E7B8390B978C3AFFDDC8771EC2C345
+:10E840004ED5229F8A9A353A6730FB9BEB75F67757
+:10E85000AE77285FE1F4CE677A5D908BFBF9F0C765
+:10E86000E31F7D0E70CBE30ACAB12BD4442FEECB4D
+:10E870004C68A63AA803F9C82FBFF373FADFD1F9A1
+:10E88000403EF1919A2A46BD70BAF375403C5E8DC8
+:10E890007A2B26C7ACF2DC2C7FA19A718234C58F0B
+:10E8A000E888994D29076E8E66C2F3E0F845EADBE9
+:10E8B000D6F3A42D00DC4F4F7BE99C0303221AAB57
+:10E8C000171F86CA4D6CBCDD429E54ABDC2F9C7E6C
+:10E8D00058EF5178FC48690859F028E2A9661CAB4A
+:10E8E000036E068D7575AB15FBB1B9C9870DEEC406
+:10E8F0008B882F7754A7F3775724417C0522FE3D60
+:10E900004EC4E9CF1771C6FB5B789CB105E2179E38
+:10E91000817C7D4401F28F13136DFCEB5CE77E413B
+:10E9200057FF24F4DFCF85DC2E55F74B596CFCD014
+:10E930001BE9036156FE4CC8F1C7841C3FB0ED5F74
+:10E940008A319FA023E18E214EC355FEB4C4ECD082
+:10E950005B67BEA15FCBDA77744F6E47FC6C58CB18
+:10E96000E3F28FA2DC67FD1E16723FDCDC793D9D71
+:10E97000DB09F95264E60B08795224E4C9C16D2F12
+:10E980002EDB80EB4B78699E16483F8D717D582BAE
+:10E99000939D12EEFDDE0D38CE43AD061FB77BF71B
+:10E9A000DFA17D7F8F375DF9AF18FF9FE78E25517F
+:10E9B0004EA526D9E454B877DF8DD82EDCFBCC4D9C
+:10E9C000940F23F0E0799CAD9735C9BAFD703AC435
+:10E9D000DA15F6A7D1EC66FBDAB3700A1BAFB45EAA
+:10E9E000A670F51E297E5E08E9A1819F4367552C1C
+:10E9F00069C3F6DD2B5E4862FF31CF364BB8ED3987
+:10EA00007F776F35E2EFFEA2D79EAE66E5645731A1
+:10EA1000D141F0A89EFF43C0F1E3D16BF591E9F03D
+:10EA2000E08A358072CC73A74CE7F4F7DFB906AE05
+:10EA3000B1E65DAC5033C6C726BB3CFC3CEBCEC553
+:10EA40007D2867CDF3ABC295B55EE2FF67C1763E28
+:10EA50006B9E6399FD2BA4C464571E9D57F0732DC4
+:10EA6000D1BF40411B8F556F90391FC4D33E6BBE41
+:10EA700049F07A399E099E592E95E0698FD5EEFAB4
+:10EA800017369F3AEB52D2CBD06D87C3D98FC131A5
+:10EA90008BC3C1E133E118C74C82209BFFF6852F61
+:10EAA000E6237C1FD60DEA1B3FFAFF1DDF95D3132B
+:10EAB000D8FE6C6D97E9FCFE40D5012FE2714B55F5
+:10EAC0008D9FDB3F9CEE72041FFDA04E26BE3D5184
+:10EAD000C5CFFBE19393741EE612EF73F20E78E953
+:10EAE0000C236904AB6762FA81F9C7925FC0705367
+:10EAF00099F4DBE4A7DC9263CB371807058EBC954D
+:10EB000092A1F6E87FD71D91502F85C47974A97919
+:10EB1000BEAD1C8DE1FAEF32F562AB97CA9EE603FB
+:10EB20003E9DC1F58B664627B42E7B5E8AA7096899
+:10EB30005D05CDFC9C6D8BD6B7DFCDEA45DF65A8C2
+:10EB4000D7D19EEB25F902DD3C5FC03CEF98B4C203
+:10EB50009EB752E4C8B719969FF519FDCCEB5DF648
+:10EB60007CC313B0650AD1435F896D5F7AE630B725
+:10EB7000E6ECE1FEE6E0B8C29F82289773393E3E9C
+:10EB8000C7ADDF529AD05E0A5F58996D3D1FED7494
+:10EB9000713BE9D0EF3C80F1F80DB55E8AE398E770
+:10EBA000E8E67E6FC5A42BCC77687FC087F4B223DC
+:10EBB0005242E5C1B9CFF8FA890E793E8047AC6977
+:10EBC000DDDC67163631BCDE9327938EE9287A2187
+:10EBD0001FCF176FAFF5D2797F38D0DF7B90D58309
+:10EBE0007FEF8EE1F9F6FDD5E946ABFFFA908BDBBE
+:10EBF0005BDB5D425F6DB19F3F333ED88E7CE009A9
+:10EC0000C6E9FC52F68ABC09879F63E2237C205F39
+:10EC10002E9ECACB92A943F6F9DD826E760879BFA3
+:10EC200045C87BE738C54DDA0137DAFD2BB44A25F4
+:10EC3000035F4E68B1DB09E39AED7935854D76BA0D
+:10EC40000FC50A1C76459AF498A98F37F88213915C
+:10EC5000EE2B99BEE4F681265BCFDB9DFA78B76A8E
+:10EC6000EC7391BD7B7A764238106F467C3BEDDCCD
+:10EC70004302DF1F2BC601C46F408D1F72511E68F7
+:10EC80009CE48CD36E1806273038A78E0AE72F5DD8
+:10EC90009FC17E3AD5F9C09FE4F8F6E718C8F3B3F0
+:10ECA00040E45D84480E7784B8BFD2E1E27EC27B47
+:10ECB000625DFFE15268DC01415FF303D09C399F44
+:10ECC0008CC78B3E40C304DB8DCD9CBF8B160BBD28
+:10ECD0002FCCFCFE03173F679B3F61F479FE88F35E
+:10ECE000B0F257AAF1AECB728EF384CB78DF658990
+:10ECF000537CE8D2383F98FB21F2734DFB699F6A41
+:10ED00007C64ED6F96390B553ACF3D01FE98C2F009
+:10ED1000F3643EEC0526479E94043E7FE7A33C2027
+:10ED200013DF83F635CA0FD4034703298CA798FB5A
+:10ED3000609EC30CCA11D1FE4C3797278C6E026EB1
+:10ED40009A3FCECF0B214DF2A140D0CD0EDFD2DBCA
+:10ED50006A5979EBDCB75EC67C85771EF3E908D784
+:10ED6000D6AA6361ABDC84263BFD98CF5D1F16D22B
+:10ED700039FD37A544BEDBE247BA22036EECFFA49F
+:10ED8000A4933F97FC8D42F6C893526A0A192A2A27
+:10ED9000D079C693D746539B2CE71D4E3B3FC7D730
+:10EDA0007FD76A5C7713B39760F8BE9976FAA0DDD7
+:10EDB00011B5F78FBB41D8D96CB98CAF2BC4BA63EE
+:10EDC000AAA1201C332041E52CD0A964FE40A59BBC
+:10EDD000B59F0E03F9C847EB02E3BFC4ED8CFF33C8
+:10EDE000BC197F8D781BA25BBBDE36CF1DF2041EE3
+:10EDF00042D04CE7EFBF685CBE71129BCF5D14241C
+:10EE00007B38AFB1FD7A398CD97E7D1AFA9B79E2D5
+:10EE10003C1C9670FD6C9E4FE7D4DBF5B9537F7BAD
+:10EE200084BDE11941AF3BE5E6487A7D85DBAED78D
+:10EE300007E3C723C83F67FCF8D4F24FBFADB6184D
+:10EE4000F3348C976AD1AE9BA752BC333C11AE8889
+:10EE50005BE8E1F76E223A56F2BC994D8C5F53673E
+:10EE6000703E07F413024C01E179C2383985F93656
+:10EE70001B92A93ACC3FDBA04ED2ACFB583D8EDBB7
+:10EE8000B35B6BFC4D56BBF60F7E178DFFCD40F587
+:10EE90003348C7E5C1540DB97B067304C7F0BC4BBA
+:10EEA000DCB7B334E8C773580F70BDCD38C2CBF5AB
+:10EEB0004AADF63AE56726E0646034BD60CFC7DC52
+:10EEC000ADA6D6F9111F111E7F096D97283947E9A4
+:10EED00035D298CB5515587CB79BEBAF329C67FF6A
+:10EEE0004C66EEB2F67FDCEF263BA73754A8A23D76
+:10EEF000F9A4BCFCFB68070EFCD603789ED2FBE9A4
+:10EF00009974AFA137F4A5054807BD1230CF96AD6F
+:10EF10009FF10F4FFE8100C6EDC3E7198071CB81D1
+:10EF20005F40EC5E36BF2BFA689CF276C108C8B32E
+:10EF3000593F1F7461FE4AECCFFEF7CF6574F74866
+:10EF4000B0F28EB361280E60FAFFB5FEC4A3086765
+:10EF5000C7987F6B423EEB62702A6487195184BB6D
+:10EF6000324F26FE83BC606A127B5E7D38528BF97D
+:10EF700068D56A054A1A0607DFEF577C892710FF14
+:10EF8000B55A436D366B5F7544277B6541F4FA4390
+:10EF9000589F7994D73BDC40F620F22F58F8AFFA0F
+:10EFA000C3F1B4BEC3428EB7478D3E431A653F34AA
+:10EFB000D5719FC39EC762A5036DA68D0E122E2B21
+:10EFC0001DCC667430D54A0786F459E8E07B42DEF2
+:10EFD0009E9A5F389FDCA870BE194EF7CDDE9CF27A
+:10EFE000E1FC61CEBBA92A2782E7AB261F68B36E7E
+:10EFF000D6B0EE59E68E23DF997C61F283E21BE402
+:10F000008B8B7C6C7F9704F5F333F105FA7156FA1C
+:10F01000BF78043E5904038730E77E910AC92C2645
+:10F02000427E35E78DD2F116BA77E269D13C098E7E
+:10F0300059E4D1C993BC6EC1A3369807AD9C3EBEBE
+:10F040005F50F58E8885EF3A99FD8C4661971C8359
+:10F05000BC62E4BBE541CF0CBCDFF07094E2FB9EE8
+:10F060007813E5ADCD7A3B7035A3C33F8E91755CC7
+:10F070007C87BEFC21E2DF97038076DBD699D74DF3
+:10F0800040FFE48FD72626609C7323C3FF31326E86
+:10F09000526365CA85EA1FCBCFCBF4282F1351FEEC
+:10F0A0001CC4FB94A81BA25D3FB563FB6C9387DB7C
+:10F0B000BD5C0E6EF7723B70A3BBDB8BFC3550EC76
+:10F0C000A5F354E7FACFF5707E38D70355B108CDD4
+:10F0D00046F1960EAF52D7C3E350E973D9F37327C5
+:10F0E00096DD6BD58F66BF3B5A53F1D726E17A7612
+:10F0F00051995B9F023C37F09725758CDB7BD7419C
+:10F1000022937DB8C3CBE304DE03FF40E74DB9A5EE
+:10F1100031F24F23F56C3CCBBE2E6228CC62728656
+:10F120002DCB407AEFD0FD64AF2D8AD4BCA94E1B05
+:10F130004E07F8E798653FBDFFA3247AB91F477EC5
+:10F14000C85AE1F7D59678897F3A5ADC3D184FBB0B
+:10F15000CC934DF8FA2052336A9E2DFA5749460F48
+:10F1600029E65F6189E720C933F83908D6F11C0424
+:10F170004B3C07C112CF41F03D9E8360FD27AD0699
+:10F18000D5F13C04EB781E82753C07C13A9E836042
+:10F19000B9AFB589CA7F6C6DA6F78FB7B6509DED34
+:10F1A00013D9E350968C2E6678EEBAC96DE0F976E5
+:10F1B000B7D88F8346492EEEA32FC2FD53DFB3B7D6
+:10F1C00003AEC717E571A5CEE8ED70252BBB6684AD
+:10F1D000BA30E0E57D2848A54FBD0330BEB0534AA4
+:10F1E000366124EFC60DFBCE53991E2F8D5E5F93C3
+:10F1F000C3EAB76C78723DE6F74CD6DB62CBB5A1BB
+:10F20000BA1EAABCEE614B7D42798FEA67EDD779D1
+:10F21000F6AF477E4638D0C8DBB2E1E0796DA58C09
+:10F22000984A80EE790C14BB53488F57E17E4D42CB
+:10F23000F8B9FDFF65581F457F7A82EEAE443E6205
+:10F24000EDD39C7E4FAF7D371E66CD18DE6FB47652
+:10F2500072D569B5036594F1F0BD34CA381DB05E4E
+:10F26000C33B679B91E731EFC817207FAECBC5F951
+:10F27000B7CBC7CBFF167C7BC85B13F7B232EEE58A
+:10F28000FBDAE58BD7613C7460AA4C71855E171B75
+:10F290000293775B8A7F5DC2E6FDE6332A607CFAE3
+:10F2A000871ECEFF932684B85EFDB697F4EA051359
+:10F2B0007EDC9EC3EA93EE8BC5504F6E86981FE9A5
+:10F2C00024B985F3FB8FAA26E634B0E667CD782C07
+:10F2D00007E30DAA802385F79258BDADE3EA09182C
+:10F2E0000FF9E3F35C7EFD54CCD3E3EA6BA6FD9CFF
+:10F2F0001124FB82618CEC87B6A84AE7F7723E2F97
+:10F30000DD2EED6FB09D9B29E82483C7FDE92C2FEE
+:10F31000F9E91F7AC47DB63EB22BDCBE8496CD9E41
+:10F32000772765E2F7F59A3F8529FB9B839574BFA4
+:10F330003659AE527EF6E6721EC70B842E4DA13DA5
+:10F3400071DB7E1F970F412FE569A5CAF71EAE89B5
+:10F3500060296BC8EF2963711DE15D9335CAF762BF
+:10F360007FA3F74D11CAE7DE0C625F9A64F2173B88
+:10F37000C6FCF95FCFC673F1AF6B3171C788F22558
+:10F38000C90492F1BEEFC08100C2F3B7E6FDA4FE4E
+:10F390007501D6BE7DB916C37D98A6D5D4611CB1C2
+:10F3A00043ABF1225F05A6D67A97911C1ACC67A6CB
+:10F3B0007B70EDE5DCAEC5F7C897D00E87F0DE4B6D
+:10F3C000A1906581EC4A09EDA18E7A0A2F61BEAF4A
+:10F3D0002D3FB33DE742CA7F5716E5109C1D60786C
+:10F3E000B17DB25E25FD5518F4A6D1DE2B34E38B3A
+:10F3F000989A6CF1377257D8F39BF39B54DBFD8FCF
+:10F40000B1097B3D4FF80F798E3C68C96B9E23DABA
+:10F41000F1E45C6F6EE4DE6C8437172F34EBC3D7F6
+:10F420007347A4B201D759A8F909EEA8B6AE1AE5F8
+:10F43000D758686E43BAFBCCF03AE09C56DEDE87C4
+:10F44000FB3E4D57E9BEC3D930B00EC7DD2CE8BC3A
+:10F45000ABD8AE4F7FE851C43970CD1CE4478C87E0
+:10F46000252DF31727FD90B4CC37B12BC7569FD469
+:10F470005D606B7FC6F612DBFB29A9336DEFCFDA37
+:10F480005569AB4FED9D6B6B7FF6BE1A5BBD227D60
+:10F49000A1ADFDF4C38B6DF5197D7F636B3FEBE58B
+:10F4A000E5B6F773FAAFB3BDFFD21B6B6CF573060D
+:10F4B000BE656B6FDAD74EBD38DDFBF9EC6A0FDE47
+:10F4C00007B3C50FED76BBD3EEF6FECF7A7D1DCA2E
+:10F4D000B5B09BE85B453DCEEA6B6EE27E8F777EF2
+:10F4E0004C47B93245D063246818B86FD5612FE90D
+:10F4F0000335C8DBA9C10564778CDFCEE4D174B4D1
+:10F500001661F07D00E5726B325EEA1A82DBA77548
+:10F51000D3DD86EA701DC5DFCDFEAA66402284F3E6
+:10F52000E93CFF887995D8CEA7B3FE96753C29CBE8
+:10F5300074157C80F967F75AFCB391FC31A7FF750D
+:10F54000BAFED67819FC58F648F1662CCB9B9FAFD3
+:10F55000C1343CE6875DE565FBB3D51D6FEA61E329
+:10F560006E2DF1F3F332E1877515F7125F0C14ABD2
+:10F57000A45F40D5CB175BE260B709BB32E0BD8B1F
+:10F58000FC40B564F6611DF1DEA6527C62B3C4E3B3
+:10F590002849B60FA8D776CE7DE3DD5BD8736F8997
+:10F5A000B7D0CBE451ECA0DBC073D23B045E4BB4CC
+:10F5B0008A1A667131FBA2E1009693756667B0B254
+:10F5C000AC6CDB012CDBBC2534DF99B1876B50962A
+:10F5D00078E773FB4F99E64EADC3FDD3381C23D1BA
+:10F5E000999AB39D9F6795AAAF23BDA1557E521EE0
+:10F5F000A2031FD2814425D18F2F1224BDE1C30362
+:10F600001FACAB522AC0DE474A0D09F333AAC3DB55
+:10F61000E97CCE97B6DBABCC2FBD0DF11AA9B7EFC5
+:10F6200077C0BB93E06B97789CB62B5B7FB686C1A7
+:10F63000DF9557928331168C633458E4CD76A14F11
+:10F64000AFF0C9A6FE2779E343DEC81BB27718FDE9
+:10F650006F9727227CDD8072CB77733720BDFB3418
+:10F66000B69B686F7F2749F46FDABB3708DEAA2D97
+:10F6700069A473B1F7239564DFFA5A7E92117FBEB5
+:10F680007E058CE923E3353C7907E97B2871EB683B
+:10F6900057B4E86EA327D339A047F81F981F82F00C
+:10F6A00088FC902E810FF35CEE7D336F4A9C07DF60
+:10F6B000900DB6F3C11BF22AC78E668FFB987F9818
+:10F6C000B0C0BB91CD8378E9F8A4A12E4EE784C0E9
+:10F6D000EFB37D5ADE43F7863F59AFE339E62C811D
+:10F6E000EF733D1CBFE3DD407EC27918E7988E5E64
+:10F6F000E997EB902FCDB8C89BDE1CC27F2C094A3E
+:10F7000033D92B2E536FC927CF269875B719CF241D
+:10F710009397EB35F6EF7EBC7F31B1CB7EAF69526C
+:10F72000B7BD7EC6767B7D4ACA5E6756F311B40BC1
+:10F730001A80E3E7AC5DF6F70D663CB096DFC7F0E4
+:10F74000B2994F72FD6BBBFF0A42FF9B71D771BD2F
+:10F75000E96A14AF456BED7AB540E8F90287FEAC73
+:10F760000C29140FA83E1C3984F6A319A779C5A744
+:10F77000DBE29F66BCC529CFFD47B7017B437E75A1
+:10F78000C2C3E31009E6DFB41489F8C6385EBA14C0
+:10F79000FDB9A564A7359F81F2E99037F1B197E2F1
+:10F7A000CEF6FB12EFD5A9BF90743E4FC232CF8D7B
+:10F7B00065C90BF8F253947F62C63B4C7F5E091A11
+:10F7C000711C6F73EC85E683186FFAAD07709CF3BC
+:10F7D00095670FB7B2FA9A712AE54B6AB3567CDF88
+:10F7E0008FF1427CCFEAD5C5FA58A2FFA75DE4D7D6
+:10F7F0006F10F46CDEE331E323519FD03F3ED32EF4
+:10F800004AFA453EAC1FEDDCB37631D96CD3733C7C
+:10F81000EE66C6D7A6F6DADFF78294ABB1FD3BBB46
+:10F82000312573BBCA08565BE2EF678AFD9AB6348E
+:10F830007DFB5256DF03A94AFCAE4485A08BD8213C
+:10F84000FBBDB13120D1FD82314794588AB59FF676
+:10F85000B8FD7DB9E35ED999CE7B668E787048811C
+:10F860007797B1F9B6E8CD12CACF2D4B99CCC2F932
+:10F870007D22CF78324C46FA3B5F09C6D288DFDF63
+:10F8800028A4373CAF9EF1D232D4E7CFF33C166DBB
+:10F89000A2BEAD96D5B57F55483F6901A8A8080E10
+:10F8A000C58FBF773206EDAEA178D46EB6AFA59303
+:10F8B000D0BFF602EA959FB0FDC57A2FF3C7B1FE1F
+:10F8C00008F3C7B1DCCBFC717CFE53E68F637D1F70
+:10F8D000F3C7B1FC47E68FE3F3C7993F8EF56F0698
+:10F8E000AA1738E359D6F8DE503CAB5F32E359280B
+:10F8F0004A3E70EBB4EF8371AD048F6B9D7A1CC3ED
+:10F900001C87E286C3C611F1C3776EFAB707F09E73
+:10F91000F5CA19EBBAF0BEACD765C6CF789E84990C
+:10F92000FF6CF2DFCABDD7D3B9B13BFF4833EEC796
+:10F93000DEAA207D8BC8ED4A68281F9DFE97E977D7
+:10F9400039ED5FB374EA233FDA01D3D14EEAA6B8AA
+:10F95000CF261794D1FD59C91F43BE70C62B4D3E0B
+:10F960007ED15792F1BED4601EAD88CF7820E5C518
+:10F97000B89A5B12EB14799E24C2D8109B919F2DEC
+:10F9800079C9C1F234C539824183EC2F89D96564C4
+:10F99000A7698928C6A13A47C89BBD4FF0675BBEDF
+:10F9A0009BBE37D199CFF3046A8B6251ECBF3E7F87
+:10F9B00066D49A476BE6F91E0ACDF4F65BC65B1374
+:10F9C0002A19554F294CAFEAA3E855C5C3F3DCD734
+:10F9D0001F98E3C5FCE54DC1E57D685F6D8A46E88B
+:10F9E0009EFBFEFC99647F0CB68FCEA63C6725C8B3
+:10F9F000ED5625EA25BB55C5F5970FB537DBB5FAAA
+:10FA0000385D31F6A3F85C20D84BED3C6A9CE21FD0
+:10FA10009E08D0B996C7CBF30A82CCBFF6DAE2AB28
+:10FA20007CDE1611F7DDA427E2D86F5354D5511CA4
+:10FA30006D2AAB243CAF17785E9F67EAFD18D91B8F
+:10FA40003F137836C7592FFCF5F54D6EB2BBE22D4A
+:10FA5000D9466D2EE56DEEF1E1F8C17BBD9807EF5B
+:10FA6000CEAF1A75DC0338EE8CD1C67DB5A6763ADA
+:10FA70008DFB331CD71D5AAEE1B8AE11F2F39F13C4
+:10FA8000707E5EFB92614EA3733130F56D2A6A3D44
+:10FA90004F76967EB413A70FEFB752EF5F80F9C190
+:10FAA0002A24EBFCCAF0FB0DABF6F1EF556D55FBCC
+:10FAB000C8DED9FA8994F19EC418BF24CE6B07FD25
+:10FAC000709BBD5228F8A950BCD7D15E2946BFD241
+:10FAD0006E5F4C3F6CAFCFE8B3D767BDECB4578CCB
+:10FAE000DFA0BDB244C8BB3E269F7972C5808A7232
+:10FAF000209E4C5523DC0DD0DB86E7992E85E7113F
+:10FB00002C11FAEA22A1CF82FE6C82BFB0C96FF33A
+:10FB100013CDEF6E1489F1C7D51EBABE1D856BDCFF
+:10FB2000B47F74F22FC72D7CA49AC4A4C30E6A308C
+:10FB3000ECF7562F72D8394E7BA85AEDA1BCCC02F7
+:10FB400047FCC13CCFC475E2FD5DE7FC9F755E7369
+:10FB5000BC1D4C6FA1BD627ECF80BEF7C5FA8F532E
+:10FB6000D3522C48795E940F58B8168C9E0C747C36
+:10FB70008ED8F761784B9E4B783B4F3C2B08F2EFC9
+:10FB8000A514D42A29BD98E789A13C59BC82AD8728
+:10FB9000ECE593745E6DB6CFC9EEA5BCB21DF5124F
+:10FBA000F71F93407688B9CF3B82FC9E4DC33952F4
+:10FBB0004AC6FECD25343FC15532B4BF0C4FC738BD
+:10FBC0009E781EDAC575F6FB400D0E7BC3A4878BAD
+:10FBD0001CCFFB7DDC2F32F9E09D392F4F1ECFE08B
+:10FBE000582925EB02CAE9EB490B7FB84E221FE2E8
+:10FBF000DFC7D052883F0E781FD5288F20BBFF2E3D
+:10FC00006024D9E08764ED3C807FF60F9C25B17AB3
+:10FC1000E3A6B33BBAC6E1B5C6811FA151E6D950F0
+:10FC2000757EDD394375FF2683EA11310F732D92FE
+:10FC30007CBF2DDF3760F0EEC43C02B44B0DD8A67C
+:10FC4000600EA6AC6D8B150FF5CBC17ED228FDE200
+:10FC5000B04DCDD02F68F663E8EA34BF0752822555
+:10FC60007F2F0B78ACF3AB88374D0FD27D9F05AA61
+:10FC700086E73F5F148E31A75A7702B6B9260EEF9A
+:10FC8000C7C06E33E19733C39FC2F7D6F95DA3C0F7
+:10FC9000FF97C6C7A9C6738BF79F193ED67CDD9820
+:10FCA00091D78B70B9E8BB1A7A50B68C73DBFE8F94
+:10FCB000287EAD5E06749F4775195A8CD179B97646
+:10FCC00027F9E16A76AD8676C04656473B60636F9A
+:10FCD00037C5A9CB4B6FEF42A22F4FFB01E5C154B3
+:10FCE000D0B2F7B071A76A2A66EC807ACE2119E308
+:10FCF000DEF015A0FB2459FBFDFCFB17C573EF4399
+:10FD0000FF283BDB4B71A040F6CCFBB8B1CBE3C185
+:10FD100026FC81EA23351827571B2086ACA84A29E0
+:10FD2000A846269B02740EE137F6DE88F73299E288
+:10FD300023FD44DF8440BD2AE2E26339C940975B7A
+:10FD40006B403F21F98C4AF1F7B17864C188B2BCAD
+:10FD50003C671BC2539E600348083F8F6B4D4DC8E4
+:10FD6000B1341BBFF25DDE0F7EC9EF11305FA2F12F
+:10FD7000B1E0105E4DB93256C4CBA34BEDF164181F
+:10FD8000606B66FD2B7FB9F87E8C278C1926BFB976
+:10FD90007F6D7E6F27EB5D883F46E79A76BDE11762
+:10FDA000DFB5F03BBE97303968BFBF37CC6FF84E38
+:10FDB0009CF48007625E37D9174BC96E30FD911DE8
+:10FDC000D810E3FFE3807FFFCAD97F26EF0F51EE03
+:10FDD0009F78FCCCCCAB64EFAFF31B9417E4617558
+:10FDE0008647C90DDE7CF6BC40E67191360954ACFD
+:10FDF0000FCD97A6F3FC0D52AC2B260DF9BFEBB53A
+:10FE000018E519C0DA1C9BBD6CE6ABAEB9B6786CD0
+:10FE10000E2BB386EE0D69488F6BF24AC97E0EE752
+:10FE2000F67F0DE5EB47FE5BCFF7A23CC53C87B9FB
+:10FE30004C286FEEEA483279EBF9B010748B5DE62E
+:10FE4000519B290EE6F970BCED79BAD57ECFD0086A
+:10FE5000CAB5384F514027BC5683D68EFDAAC17E05
+:10FE60009FD0F361BECD4E1F1ABFC8F63CCDEC1932
+:10FE7000EB772C461E3F007A9975FC89238C3FD97D
+:10FE800031BE9671FCA171736DE376A83C3E9A8CED
+:10FE9000F869DF9DF64055A0A63890374AFC3EC071
+:10FEA000E3F71BA2CD14BFAF01C6F08C4ECEFDE42C
+:10FEB00098C2EFBD01D96D50648FDFD708FA95194C
+:10FEC0004520FD9EABDABF1F361F9CDF13B3DB431B
+:10FED0002F21A3B079E550551FC5F13F0AEAE87F0D
+:10FEE0008D642FF7B502C58FE707FA6FC073EAFA82
+:10FEF000C0F75D1DB3459E6C01C0DF04F69E8FF711
+:10FF000003FBC4BDBE8E884C7889D78CA57B3AE6AE
+:10FF10003871374C42791897797E02FD61F3F7E525
+:10FF200015D8F21CCCD2790FB4C190E2A516BAE96B
+:10FF300093195EADF39D57D8A358D611F7C00C9A0C
+:10FF40004FD8B983F38DF97CF33D2FE24EE67C0D5B
+:10FF50000BECEB6B706BB4BE06C1BFE67CCFE3FA73
+:10FF600032E0F794F3C99C6E06E7BBC0BEBE068FB5
+:10FF700046EB6B10DF031E9C6FCCE79B6F83AB39A6
+:10FF80008176DB3689F3FF77373FDE81FBFA7EFD32
+:10FF90009A28E90361175F841D58BB8B543EDFA28A
+:10FFA000226FAACD32DF0E26070C910F6F78307FBB
+:10FFB00043A37AAA354AE5BDCCCE36287FA38CDE92
+:10FFC0003FD01AA3FAAED6D9549AE394CDE6DFA770
+:10FFD00099324FCA686FFF32C0FDC66DF9DA6557B6
+:10FFE000A15EAAF6F37B93B3BF0486C5FE6506F156
+:10FFF000011F9EBF5C0A15A8DB266FE770476AC722
+:020000021000EC
+:10000000A470FFFC1587FA5A59DDE372E9A84F196D
+:100010002FC433F9A98703DC0FF7B8B9BC87B9FC43
+:100020007B878B845E01A55E72213E2ECAA6F3FEFD
+:10003000C54B8C90C6F0B644927E532AF414DE6F02
+:10004000B9446C95D3CE8FA0C660E3460C2585DFFE
+:1000500031BAA4E87023EAE578E862F20FE2AC6313
+:100060000E1BE712A127AB5FF500E63BC0F96E82DD
+:1000700063C912BB3DBFCD97D6D03ED9561101DC26
+:100080009FC5F5F6F71E37E7C3B8E3FB068B4EF1C5
+:10009000BD03FAE656867C53677CF24040E4AB8AA7
+:1000A00038E40928BFAD165F164546FDDEC14D0197
+:1000B0002E9F4CFD369C8E393C7F10726C47EB3E78
+:1000C0008A8799F015A82909E57561D33E5B5E130F
+:1000D000432C19C3661C1E943D15E88738D7B343DB
+:1000E000DA933FDAF74D0A407DBDBF4C7CFF531ACF
+:1000F000BEEE5703F6F8EB0998F75C2964E21F1E81
+:10010000775D745889B5E9437831F1F0FFCD475BED
+:100110001166563E77DE0755DC7F2BB27D67D3FC38
+:100120007EF0C5837515540B3D5F749D9BEC1930B3
+:1001300006CA91EE8E9C13E0DF7B33ED97F46F657A
+:10014000B45FBEF8F8C6385B7EA71877A4FD72E6E8
+:100150001B5AEE8B0EE5C3637E89C4CFB10A30CF44
+:100160002DCC9F1FB3DB99B63CB7F5FB1F9430CE67
+:100170007717E6E359CEAD0B993F8FF1AEA215F696
+:10018000BC3A275C665ED5E07DDB794BB43D3A7DB9
+:100190005FB11B3F58D3B53D19074B1EA5798FD0D2
+:1001A000F4A79DF7079520FFCE5E54DCCB70C68385
+:1001B0006F94935AB18479AB296F352BA7E72466E6
+:1001C000E195F61B95641D3E57C6CE6D423C2C6DE5
+:1001D000F9760CE3775A6EE6B8F452A1BF6B829CB5
+:1001E0006E8EBAD2E3308E7D4D4E4D4D302F43FB97
+:1001F00096EFD078F347F86EFDD7823C6E7297D0B9
+:10020000E7CEF74BC4FBAFAE94E93B183E08A5A47C
+:10021000623C37EE9E4DF7F656ED8865BA1FF75CE7
+:100220003871B1151E5F29BFA70DD03B07F1B5F19D
+:10023000E3BB7B1F62A8CCF93848723447E1E35A2C
+:10024000FA7F2D386378FF273F7A91EE373F89F7A1
+:1002500059E6E2F6DDB300E3DF5BCD3A86E4B19E1A
+:100260006DD6BFCDDF0FD6672CA866FDB7220D3245
+:1002700022FBFD960B3A51CF6E95407C87BC6E01F8
+:10028000FA875B5DBCFD3F89F7F32F7CFBBEDB503B
+:10029000DECF74931FB855D823267CFD417E1FA95D
+:1002A000FF14F8BC45EC5B10F119F94CF8BC2513B0
+:1002B0003EFB738CEF209E7C9849C140F07DEC5D45
+:1002C0008BF9C6FFD00AB1ABD81AEE8AED7DF036B5
+:1002D000A0FE1D99F019CF313AF17970E5315A5FDE
+:1002E000A83488EE0D6C9C05344E06386E1D6D5F8B
+:1002F0009FCAE272EC93102F7384FDA778FAA2785C
+:10030000FEAF557DEF068DC991CEE2EEC64CF47D71
+:100310007788DBE5D923C4AB1F15F8FDBD16DF894F
+:1003200070B76BB7D37758DD12B71B36CEEE07C95F
+:10033000D2EF85106FCFE07E00E176CFE1DF470D91
+:1003400031BC638259A88AC3BF513F0298FF1D8AFE
+:100350001EA1BCD050553FF13B5D6928E07485FE7D
+:100360009A57D8678F6E59BA00E54C8E62D2E1F188
+:100370004EA41B65A84E74D493C3FBBFBCF578276D
+:10038000FA733B99FD82DFEB4816F0BC11E7FA9E49
+:1003900014F0DE13367E8EEB1B864F4FFF7DB7B118
+:1003A000FE5B27F17B39F3E5BEC62B912E2F0C9215
+:1003B000FDC59E375ABF93F307416F7F0872FB69F3
+:1003C000EB475E7AEFDC8F91E8F5D702DF9F835E23
+:1003D0007F9D89DE18BD1E71D0EB0790995E5FC9C5
+:1003E00044678C5E8F66C28BB3AE80B11DCF67D57C
+:1003F0003F2FD885E3A95F9EB7FD21562A7FBE39DE
+:1004000049BB19936CF750CD792AA4C45B418B7C0E
+:1004100037BFE34D391099C69D35733BCAB1D31828
+:10042000F704C2ED1CF7208E3B03E54B3091E9FB4E
+:1004300046DF0FF1BCF107C5BA46E29BE74EC13774
+:100440003F0D713A607CE30A9D06DFBC2EDAB37D76
+:1004500008854E8B6FEEA4D257CAF986AE2BCF1DFE
+:10046000CE3700AF74A23CEE2CE67C313EF44667FA
+:10047000B2C8C247F011BD5786EA24BF4D3E7A3B51
+:10048000F411F191B37F7884EF594D1A5C47BC1495
+:10049000D76D9CA5B5F3FB38FDA4B77B6060BF8723
+:1004A000F26C795EAB3F9934B8D9D007F87DC4A916
+:1004B000821F77A20F867ECE4C116752FB60716857
+:1004C000383F87AAD255D6EF0D1C12F37F1A8A57F0
+:1004D000E1FC3DD03F05EDAF91F6698E98EF7BD9F9
+:1004E000C69C50063A3F951EBA3CC4F3372F17F30B
+:1004F000E67CEC6D46FBD3C9EFF357FDE39B0F8C15
+:1005000032CED744FF8B439F9BFF2F0E65E6FF251E
+:10051000213BFF57E1773A33F0FFD74299F97F69E2
+:1005200026BC7C017E6F0A65E0CBEAD3C4F78F045A
+:10053000BE7FF405F1BD51F46FFBFCF86E1B01DFCB
+:10054000EB108FA781EF8D23E07B5388EC95470854
+:10055000FE901EA43876D72CD82B956484E376EBD6
+:10056000385E9D8FC3F0FE81C4E87EFE9FBB62991A
+:10057000BE4FC3FAFD83157EB3DF9C90B8270DFAFA
+:10058000F5E89FDFF5E520C5FB997EBC27F497953C
+:10059000FB0F8632C8FDF93297431F6FD9DB89FA0A
+:1005A000FE0B8CFF58263A5B2DE03E955D7058D0CF
+:1005B000075BF7E3A1BCE1F2AF47FC9ECA3DE1C493
+:1005C000C110F957FD0B515EEDFC568E84F1A82247
+:1005D000232DA19FF073A1C72A433ABFCF20FAED84
+:1005E00054D312E6B3EC6CD624BC6F6419EF97A118
+:1005F00019238FE78483C1D7172279673C8FFDE6E3
+:100600000CD9819FC94E6ACC367E1B22BB2DFE0AB7
+:10061000C9ED33EC72DB5C871CEFA6BC17DFECCCBA
+:10062000BFF7F2F3A02AECBFF86B56F97F34A409A8
+:100630003F948FF759F50F83EF9D10D72BFF8DA5B2
+:10064000133E275E4E056711EA793EDE4799F49422
+:10065000733CD36F35F7C98D3AC912D7718707ED4F
+:100660005E5718E549874CF790160979B26876B657
+:10067000B0DB353F8E7F978893DFB5E2F66A3CEFBB
+:10068000EEB959AB4014143471BDA7AF184FF14FF8
+:100690002D2CD9CE93CD72B0BFBB770A7E9F9CCD57
+:1006A0001BC179CF9D0769F41BB3D06EA078844637
+:1006B000BFF795E3E98E62FC74A3D4DDB81CF5EABC
+:1006C000C220BF57125D728AEFBCF1F893B96E88F1
+:1006D000569DA27D1BB5D702DDF49D8CD36EEFE94C
+:1006E0006ECC945F32232C9B788D8D8AD76884E200
+:1006F0005A267E87CFC3F7AF3ADE2C21BE435592F0
+:100700008657AF428C4ED05E924BFB289FE92B550B
+:100710009C5E80F925A37F67A3D3B4D7CE0BE77D7A
+:1007200071B8CC7623CF27DA39EE2BE0B917C5673D
+:10073000835C8E5143567FEF706EC6B8BF596E68AA
+:10074000D58A549775FC148F430EE64FC7A2686F85
+:10075000B500A747887AC90EA3EFB95BF6F39A30C4
+:10076000CF73DE99155F1E26F862F4FD42D0B4D334
+:100770005A0FEB772DEE2BA8AC5FE8F4FB8D5C9A5B
+:10078000BF7317D3E396EFA599FC3A369104FC1E8C
+:100790008DBF1C3489ED7F24649E13723AB8336890
+:1007A000D69374481E2FEDE679F9BA49275CAE68F6
+:1007B000815E43AE00D81EAEBF203A858D579A8821
+:1007C000E2A7F759FD2995E42FAF03D43F7588F4CC
+:1007D0008576A614637A4AAD7BEAF038E057A5C85F
+:1007E000CFAD7B8AE4DD601DD298CFDCE31FAC1B6C
+:1007F000DE28AB970CD69358DF29F4E4F670DD536E
+:10080000EDC4FFF13BACFC512DE8F02F4D7F3D7A5C
+:10081000BB86F70C925195ECAA8D0E7AF8E7B09B47
+:10082000F05FA525EE477A5874F3808A5757BCC508
+:100830009110F2C384E80749FCCEDE8479224DB5DD
+:10084000947FCFA127BA96F8B207F705785A02C667
+:100850002787F62795797FCA52B43F7E9DBF97B10F
+:100860004EFE368FBF05CA383F6B1E1EDFDB27E406
+:10087000C9536145945CBE6645DBC99FF2D6C91475
+:100880003FCEAA936D7A837E298FDAAB367AEBCF8F
+:10089000491C0C5BE523A4E3656C1DFE29911C3CFF
+:1008A0007FA92E53D7A2BFFD7D61FFB17DBA97E42A
+:1008B0004545C49FE0FBF64CC67D137839D5BEBDD7
+:1008C000D89A88D5BA46DEB74B2FE3F9F4CEE7BF06
+:1008D000137838DEF89FDF437659E91DA0EF7E7765
+:1008E00095B6511CD68CBB7AF656A70BF5A17CC0E9
+:1008F0007581F03C2C9DF3BEF8C9DF6B744FE42387
+:100900004FC6F324258BE3F9486B23F5631B4CBFDB
+:10091000D372052E85E7B1D9EEF199F7112E074E66
+:100920000C4BE2CBBE82726879A342DF77B802EC4F
+:10093000F914979B795F2D667E1CCFFB4A40F60227
+:1009400064C36549C7EF4C406C01DEB71FF6FB136B
+:10095000E27CEBEB8EBC89AF362E8BD58A76EFD35B
+:10096000FF5384BF253A97BF4B62FC3B3F97C42F90
+:100970008BD55ACEA35FFA54C99837191FC4473C88
+:10098000563B69383E96C725B7A69F1A2FA78B8777
+:10099000656AC5823C7D381E9CEB6718DB8A78FE51
+:1009A0003AC333DA9D23E183B5A3FD78E932857E2E
+:1009B00077668152EFC273902B1B243A6362F80D65
+:1009C0008BBCB8FAF32DF03AF1E8C4D7954F00DDAF
+:1009D0001BB8F2BB218AB7BD60E2277D2E9D5F98D0
+:1009E000E72796751EE3F95B1AAD73F1EC8A5FE0B9
+:1009F000F71512ED4CDAF2F5DACE019733CCE3BD00
+:100A000005B6EE6323ECBBED3CD0099F137E9FD06F
+:100A10002BCE733150D3E5A807CFCF12E763D32095
+:100A200026CEC7B2281DB734B3BC757E97CEA4B30B
+:100A30002B5A1A06E7C5F125480CD635BCAFF5B4DC
+:100A4000B2F512F6F73551FEFB87F1CB723BF0DDC4
+:100A500022307F97C8A0F3A62B04FE1A98C787BF41
+:100A600099762E134E78AEB7C8F0E941CB3ADFEB5A
+:100A700096EAC43DAAAC2553B15F72BF326D38BC53
+:100A80006BA2FC770E191D7E60A543DF24FEFD5985
+:100A9000275E4C7C350DE165DA67C1CBEF5171E61D
+:100AA000D1790DD9B9039297EEC39BE738ECAF49E2
+:100AB00037139DB764150B3B80AFDBFCCE1740337B
+:100AC000D9F74BC57DACA32E687C38C8CF752A2DCD
+:100AD00072EB3B39D5B76459FC63F35CC7FCAE9449
+:100AE00049CF977B836985D3A1EDBB5143794C09ED
+:100AF000CA6352B256E8888F2E7C3587EC9EAE2CA6
+:100B0000F49F03FCBCCAF7F4A35D97E843FBB7E985
+:100B1000AAC7BA67B0BAFFEBBF4ED2A07A0EE12DDA
+:100B200024F6AD5AEC9B099FBF9C3FB7EC1F8F9FEB
+:100B30009589F899D8C791F484B98FE6BEA11D852F
+:100B4000F4EB2B53FF9CE9F7FAE050D500F2692251
+:100B5000AA520E5D427AAD83BEC705FA4E3C7FBFF6
+:100B6000A2C565FB9DA604DED3C7F61B7DC22F89F7
+:100B700051FFE5F9BC3F9471BB7190EE93ACBF257A
+:100B80000F08BCE131B86FFDAC2FE689B1F1C6A00A
+:100B9000BE872ECB3C25C3E71D713C473F65F0DC8B
+:100BA00024168B59E4F5BE2C6EDFBE17ADEA9533E3
+:100BB000C45FCC72B937B748B5E4871DCBF736664A
+:100BC000FA7EA939DEE0F7E506EDC481A70ECD1B5C
+:100BD000B2133777BC65B713936F7D213BB1FFB676
+:100BE000B79E6A67FDFFF43B0FE9ABF7EAFCB40F71
+:100BF000B92DE7C17FE07D5B157F0390EC7BFA3E6A
+:100C00008EB7A590D623A90C73F83B627A4C427C30
+:100C1000BF891FF3C5B88A0EE910032E578D498886
+:100C2000AFDB853FCAE86C8AF53BAE6F66713BC3AC
+:100C30009CC7E38524DE3336C76574D04679A5F5B5
+:100C4000407AC43C8735F9D91CE74496DD0F3E0D48
+:100C5000FE3D91897F9F959BFFFD16B45F9F5128B4
+:100C60001FF46FA337D1F34B5BAEA4F2B2966BF9CE
+:100C7000BC62BE6F4A8993384E5FE3AFFFF64646CB
+:100C8000AFABF77AE85ED9CA6FBE792BF2A7B7850A
+:100C9000ED3B6BFFBFCC8E383800800000000000B9
+:100CA0001F8B080000000000000BE57D0B7C54C585
+:100CB000B9F89C3DFB4AB2BBD9DDBC96BC38E11902
+:100CC00025C44D801010EB86575109049F51026CCA
+:100CD0000884008104A4BAAD1436246040ACF155F8
+:100CE000F1AA7451ACB657BD4169E5B6D16E442D39
+:100CF000540AB1BED00A06A516154DE45156ABE50F
+:100D0000CEF7CD4C72CEC92E84DAFBFBF7FEFEF196
+:100D1000D77ECC9939F3F8DEF3CD37676F5C587521
+:100D2000FF986442CC430D4E8910D29C45CA5B6D3E
+:100D3000B4DC209501DCA898A7EDA4B0CE5132D246
+:100D4000398690B3F0773994276399781C0652441A
+:100D5000C84A2BFDB742C89943B77BE6D3FEE26D84
+:100D6000362F7D42FBC9B9CB40CB64AF4C1EA740A8
+:100D70004E20F3CAF228B43038D069242405A001EB
+:100D8000611A40DAAF3542679304EDBCDE7A3ABEB1
+:100D9000D518244E8011233E374B747E79BDF31154
+:100DA00050F4678DC8848C82F1F4EF9BF139AC0B61
+:100DB000DE9793D83CC4FBB9F0FE1880621E096C24
+:100DC0001E49FA7E1CECB94CEA014FFA7934254EE3
+:100DD000CA73A6009E7C230112D2692AB31332D7AC
+:100DE000F68783523E85565B58A690044CC73B73EA
+:100DF00009FE9D1D04FF5FE1FC78042112E994CEF9
+:100E0000D2A1677C23850752FCC595C8A17539140A
+:100E10004ACED2D1A369B3129317F0D93124D93E67
+:100E20004835FEE540453AEFD78D4E3BCCB36C8A52
+:100E30005C16CAC3EE53AE857EA654156D62C359C7
+:100E4000492A21F3D8BFC9EBCAF6E641B43E1834AB
+:100E50007987523ACEB3064330BF79C418ECB462F6
+:100E600013E9AC84503116F1F7E87CE74D967D71BB
+:100E70000E4D3B7296CE9334919787D0FEE74A7C15
+:100E800080202DD3F70EF3E207934F5E07CBE824C3
+:100E90004EF320DA7E6E67E574928F5536E0A785B3
+:100EA000BCDDBC80E9684FBFF47F95416D797E71F0
+:100EB000C1AB940C142FA169A381CF2E32209F5572
+:100EC000356BDB2D7CFF8A4F8803FA351EEDC13769
+:100ED000CC93DCCDF8654AA353A1781AED54B03C0D
+:100EE00063F24793092DCF24E43AE877E664D919F1
+:100EF000A6AD37070CC44727BEDF278724BAB6FD47
+:100F0000B99D7B2F07BC159B94C761ADB9E4CE6B2F
+:100F100092A17E9413F05C06CF06607B42A09DC731
+:100F20001A1A4A9F75F83EB255A9F86E7FF1471715
+:100F3000F929BDB61A484D347E22A401E9FAF28F90
+:100F4000E2B19F0FEE9342163AFF29F2377F1C4B16
+:100F5000E753F56393D7A2E0B20C40D7E95E268F42
+:100F600084F86C53283EE71256FE88941585E9F8FC
+:100F70005505874A2CB49FAAF512CAA9C03FC5F7E8
+:100F8000876ABCF9EBCB12C30AE25DF39C76660676
+:100F90007EA678FE30069E3F54E339F0FEBB235F09
+:100FA00056B5BBDB694F063E2785A4F02C45CD69BD
+:100FB00032217114E9BB6E01CFAC3D38F2E5A1845A
+:100FC000DC477C5B50EF904E63D9484A2723F145BC
+:100FD000D303A50E260753E4E3489F13C5B202F8D6
+:100FE000DA1FF8D446398CECFF469E0678263E4A36
+:100FF000EC71BDEF3DE334E37B5BCDC40778DE9A53
+:101000006E0D35D0AEDA7F74715A27D247796002FF
+:10101000D0F10F26F2B8127BBEF6804C8650C62C5B
+:101020000D480805FD0606E28871944A5F91E8F3D1
+:10103000FF1DC8319D5ACA6A6250E8B8AE20F185DA
+:10104000A2F08568B7CCDA3DD548B07DD845E7B782
+:101050005C318424BADE0289F1B3D554EFCBA04DC4
+:101060008D6DB3821904E621E33C143A3F239D5F62
+:101070004E2001CB8302490807075C08870432B081
+:101080007E686030C261811C7C3E3C3002CBB981FD
+:1010900051082F0A1420BC387029C2118149D82E5A
+:1010A0002F50827064E02A7C9E1FB806E12581598A
+:1010B00008BD81D9585F10A8425818A8C4E7A302F8
+:1010C0004BB13C3A703396C70456202C0ADC86702C
+:1010D0006CA0116171A001DB8D0BDC81E5F1817BDE
+:1010E000115E1AB81BE184C043580F0A08F010CFF4
+:1010F000E5F10E6581934A0A70B8027C1C4BEEFE46
+:10110000C1ED52B5D3F731F09D68673610BFBABD57
+:1011100068F735B71B2EA06B94FE4E73FDFC85F768
+:10112000C39F0E27BD746BF6349411B9975E969DDC
+:1011300025E10CFACFE5BB6611D00B243759C3A7C4
+:101140007DF5035BDF5FB8FEDA6AECF0C9C0BFF57E
+:10115000C41BA48F4A47BF2E413FDB14E3B4501495
+:101160007ECB7799705EA39D7E938BC2849CA32FC8
+:10117000833E991974FE7122F04B5EF21F26D2FE57
+:101180000636196004AA4A9CED13A9DE512613D431
+:101190008BDB084179DA16AFB5A7C35C0C1F84B4AA
+:1011A000EE1984F234A490D99FCE2B40BECC3F1AC6
+:1011B0004436E580BC852523ED2FB89290C785CDB8
+:1011C00080F61BE6FF1CEA7BFB33337FA199BC64EE
+:1011D000A513C9695126C65138788BEFA538FACACC
+:1011E000D0907F623C2D0F7F32F812C08B5A431390
+:1011F00013281CB12BFC1235A76464B873A28D961A
+:101200002FD94376035A0B3A9449765A1E75D0B7B4
+:101210009BB20119D3E99FE450603EA146079DCFE0
+:10122000D6C3C4DB40CBC5C75BE444A2A2BF99F8D8
+:1012300077A8E8621FDD313989FE337395B34086A4
+:10124000F78D9D71AEBCBEF4D906EB8675523BF2AC
+:10125000385D57A62F2C39557C72B54B1274280275
+:101260003ACC58DD6D84756E6B72DB917EF1CE12D7
+:1012700018B27B0A713EAA001F1B114FE6F583507E
+:10128000DE05DF51FC5E34CBAEC69B24F45A4D6BB9
+:101290005E6CFC5EFD6F86DF23C06D6362E3D70A80
+:1012A000BC32EEFC725CE5EA91E379AE31B1DB353C
+:1012B000BB983ED5E3799B81ECA1B68A8E4BF9941D
+:1012C000C91509D2A68D9CBFCF87D71FBB985DF9E2
+:1012D00077C1EB4D2EA62762E19528C9A82729BF23
+:1012E0005E4406C7D637D05F34FB758FAB8F9E3315
+:1012F00083BFD8ECA47A6E706C3D37D7C5E81D5318
+:101300007F713D63E67A5C8CF7334EB7038EB2474C
+:1013100080BEB6F58620C85909B1A35C104F32E7EC
+:1013200013673CF0C974D95902FA860C27E847279D
+:10133000E48582B04F1918540A6568064A19F09876
+:101340009E1BDA44BBCEA17E8691D29F761506689D
+:10135000559C86F974DD8942DE9C951EB5BC097BDF
+:10136000DF2B8F822FDCDB36E5307E9D45FD97C37A
+:101370007CDEBDFD48D86EC30FD3B76D52E9C16D99
+:101380001E0F9645FB58FCFB8DE0DFA675C40FF2DF
+:101390003121BADF70D02573BEEDF6019F07BF473C
+:1013A0009CE0CFB89A3E44FDE4A2FA4942FDC4C68F
+:1013B000CF0CC4FF3C48CBEFB852B17FC0E3F5F689
+:1013C000FF77FCFC948B30799AE06C9769FD406A5A
+:1013D000871490D30974EEA3015F66A4BB42181D65
+:1013E000950924047E2FC55BD800FAD7600F819D34
+:1013F000319B5B7C20CFC4ECC2F51F70F83F769D1B
+:1014000043DF3813940220EA99BBFF3ECD46F96FC3
+:10141000438E331ECAA76879B3878EEBEE24BCDCFB
+:101420006C43F9A17FE948C530DD1B807D14659FC1
+:1014300015DA0FEA2907A1BC157C92F1B47FD7D742
+:101440007B9A2862CA5DBED3301FCAD76700FA866E
+:10145000D30DEAE05E7E3E9F3F20E4B3579E9C059D
+:10146000429E2AF3501F4AEE94DEFE62F937BFE532
+:10147000FAD3ED6630967F23F8FE82FD1B3E5FE2D5
+:1014800056CEE9BFC4ED7D63CB765A5EE99195A354
+:10149000D4BFB3A7BFDD61A4652BF5373FA2658339
+:1014A000B5C308ED4AA984DA28BE7DD4C983FD8777
+:1014B00075342BC31FEC3F4EB448D398BE5612AFC1
+:1014C0001D792E3C86703D2B3D661C2F6EE89044A6
+:1014D000902B07E72B62944260C71DC54EE37CEC5E
+:1014E000AF935C4DFBBBC4CDEC82906BD05BCFE681
+:1014F000815E721B61BF6EB192A0DDDDDB3F941394
+:101500000B7BF513E1FBB89BF99EA9659D3771082C
+:10151000C8E97E16476959C3E4B2349384D6819EE4
+:10152000F011C549DBC711F1470597964DBC34FD55
+:101530006B89F8E8FCF77D2D23948690B09DEEF73B
+:101540004ABD5218F68166833504B6B424DD4ACC10
+:101550005076184216908F0F255CA7B9302104CA27
+:101560006F727A7162275DC7C97DBB6DFE28F4BFBB
+:10157000C15FE99D3C2A361E7BDACD79C509787CAE
+:10158000486972821F19F41831EEB0119AAAF4FA60
+:101590005C37F347A83F540E7C3A6341779319E8D0
+:1015A0009D938CFE1019E246BE1DE0D9B9B1044CE2
+:1015B000562DF34FD349A841ED5709FEEA74FBE7D6
+:1015C000BBE93C1EE276848A65C73088575D94EC9F
+:1015D00006BFB4A42EBD0DFCDD07D712EF0213EA3F
+:1015E00083EB605C5F526B01F0EF43DE9DBFB80B95
+:1015F000F069A1FB62D0E3A30ED9144AAF8A31BBD4
+:1016000053603D7FD4CD5FC08AC01AC48B7E1FBC9F
+:10161000D2CDF7C1F9241FF6C127BDD7248691B7D3
+:1016200092A2CA7745E036EC47EC87DF3785B39C5A
+:1016300051E5508B6F317E85C4F6B5C42431FDC7AA
+:10164000ED28D52F4DA8074204EDA6CF223D0AF67E
+:10165000E6A4779417EC762C7D23E643F138B4CCDE
+:101660001EA55E2265D1F4C45637F30F2A4C74BF11
+:1016700040EBA51563EA615E15769B047C27DA6D65
+:10168000E2ED043F8B78959CF8CD18A03FC407A3EA
+:10169000AD7F1E319E52C7A33681ACA5307C79A3A5
+:1016A000F82BB1F075D0D4520AF33AB850260DB4E5
+:1016B0009F93FEB16924CAFB02BE077C43E9B22AAC
+:1016C000898DD743CF21D1F177706D8D77B2A997EE
+:1016D0009E7DEA2BE3CAC17E97031E55E31E70333D
+:1016E0003B7F8C4362F12B4E5A6F9E7FBF938C04DD
+:1016F0003D756A4CD00E71B1EE5F3500BD7F6CC791
+:10170000784579E5E9310D2355F82C266824E7ED75
+:101710007ED0A9D0E7E5439B5282B6D8783C0678C4
+:10172000A478BA031E8CC378CC1FDC17108F2179E4
+:101730006EE437B23BCE1B8678E45BB217FC06182A
+:10174000D78FFA93C5935739D9BCE2747E5E79601E
+:10175000B946BF244424124A52958DAD189F4D8836
+:1017600018F1B95EDE9ED2C99BC07F2C7A0AFCEBD1
+:101770009FFF9EF3E5C1CAC50AC40DCDF1D1FDE0BE
+:10178000EC2449C3576FAFF56BC67BE75B59B35F7A
+:1017900016F0EFBCFF93FE716910AF2A370787F68A
+:1017A00047CE057EDEFEE60127F41BF79525AAFC51
+:1017B0009DE2F689DAD3E6EB14953DBD516E02BC8D
+:1017C0002718B97ED3C99D0FEC2AC5E7E56057E914
+:1017D0001413CE6357E791603BC491F5E30B7BAAEA
+:1017E000E72F615FF574137CE049A2F44BE8A59FF5
+:1017F000881BC6922F21579D5CFEF5F8D7C31BCCE2
+:101800005ABF47C0CFB99C9DF4C79120D58F379759
+:10181000C82122217FA07D3C78BF84FE66B8D28299
+:1018200076B9AA320EE3B3550532D657DD29A3FDAA
+:101830000C53FD504BE7F347AE27F4F1D912227950
+:1018400027ABD63D63749CA67CE3C27BFFB816E24F
+:10185000CBC52605C6DBAFB07873D027A3FF4AFB04
+:10186000F086213E7DDF655EB067821FF6FB6494E3
+:10187000B7E09BB21786EDE0F1E8FDCD052119E850
+:101880002CF97BC6510643FF550AD0E15DCF1627E0
+:10189000E8BBB86F1F282BC3FDA35F2940BB499D40
+:1018A000553AEF382EA793D28BAF073BFEC1661394
+:1018B00081B8D107AB4FA23C77AEADF74E1EDA1B15
+:1018C0005F16F1617D9C591F5FEE1357D6C59305D6
+:1018D0003FE8F9A422067F087D158B3FA81EAB4A7E
+:1018E0004AB9703D26F4C77B7C9D93D2B7DCD940C2
+:1018F000F190B040463C08BE7CF79BDB1F013D1CCD
+:1019000047F9631DF0F3B74FBC02FB10B2588A1AB7
+:1019100047DEDE63F7285D727BE972A37F714F19A2
+:10192000C47F76CD8A9E32AC5F6F5762EBB573EBA6
+:10193000AD61492C5EA1B73B7A79F857DB9DF2CABD
+:10194000FB73E1FDF2CA8521801BD3AD35A07FF585
+:101950007A426F27C47CF4F34C88C824344A3D6F24
+:1019600005DBF5DA0933D607AC8E7C70D6CFC431EF
+:1019700018042710FCD2C371A1461CAFFE92329C02
+:101980007FFD588001E2ED0CC2FA3CF1183F68C9B6
+:1019900064EDE52BE2993F3EDA8DEB9485437ECAF8
+:1019A00085E546BE86516EFF734914BF8D3E431CCC
+:1019B0009C2B4CB21BF742C8A565A28158482F9EAC
+:1019C00084FF4E203240D78B7512EC3B0BACE6C146
+:1019D000E89FFE16FA216BE8BE90F2FBBE7DF2CEC8
+:1019E0006D7489FBBCA312A3F9E702CEF1FC10F5DC
+:1019F000C2F5812A84877EF04E36C8EB2D92FF55C2
+:101A000090838EF2AA3BE15CB86E978CE74A736EC6
+:101A1000797718DBA769CF2765873517E2288D52BC
+:101A2000BC17F488C063BBDD8CFAA5F110D3838D9D
+:101A300047245E66FB889779FDC9F7EDB8CF10782B
+:101A4000A7EB790BC6F7DDEBC2F5887DC677584F5B
+:101A500027E027F67A329DA82F80AFE4DEF9CB7617
+:101A600023AEAB8BC47B61FE011E0F22EFC7A1DF4B
+:101A70002CE85BC7F94FD07739A76F57DBE99F5C3C
+:101A80004ADBB7F8DC78CA2067115C6FD7FB09C85E
+:101A90001F62BD940F4EC1FC76B7313BD172D8CED8
+:101AA000F0652FCA85F909FFDA99C4FC64FDBA2BE9
+:101AB000C43E9DFB19E0DF429C62917BE2D9A431D8
+:101AC00051DA73BF96E2D9904CEB4B9CE45488F406
+:101AD000E2598C23C615EF3992B57E4C058F2BBC8D
+:101AE0006F22E5104F84710B55F35BE32E7124A731
+:101AF000F41DF73BD07140F239F9524BC73AA3AD10
+:101B0000594A243DFB620CA5297DE55C2F67525B99
+:101B1000FB57703EAF97FF33867A22D17E6F95FDDB
+:101B200007DD1436FA49A765705F79389F1EA1F466
+:101B30002E484EE9AB4FFA4BE709C952CF3E86D348
+:101B400079427214BD27F03DDC5DF63DA887F5674C
+:101B500014E23ECF0774073D611E84E3215F76BB2C
+:101B600048E851DA2889C751C47C202E1147DF9BF1
+:101B7000999C83E34A461234D17252AE5702BDDFBC
+:101B80000F3E98F92FE6839B92CF29CF61F44B96B5
+:101B9000717A2F1379163BCF9D67D10FBAD5C03A12
+:101BA000CE18BCDDFE9C0BA7DBCDC97DE4F3E6E4DB
+:101BB00073C8E770B7FF1618AFD14C4EA11F5E5C1B
+:101BC000E981F10E387C9F24D2E72F36707D924355
+:101BD000E946EB5F4996515FDD432E463DFC3D8370
+:101BE00001E7DF45F5EFA339D1F83E6874D3F7CFAD
+:101BF0005C4DF03C8EAE6F3DE3CBA004CF6F9D47B4
+:101C00000CF0DCA33410C305E8A196BEFCD9722EFB
+:101C1000FEA47AE85EA8A7FCB80AF8D1AA388DE736
+:101C2000D2433F4BD6DAF97EF0DFCFD478FE17F0FF
+:101C3000DF2FCFCD7F17CC57CF45D307828FC5BEBF
+:101C40002056BE10954792E1EE3B2E215E3C0F2BB5
+:101C5000715899DDDD21A19D6D3C52E0C7B2DD8A4E
+:101C60004A41D8E1133B59BD3C31BA3FD896EC66A6
+:101C70007906AD2BBC464D1E48109FDFE53BE11CAD
+:101C800042F5E254D986EB4B2A65F143B17EAA674F
+:101C9000A74F49E57153BA9EA42C868724EA0FC04A
+:101CA000399A83EF0F128B8D1ABF5FE0ED56B94C56
+:101CB00082B8B72B9940DA0DF5EB570F87F37B9776
+:101CC0004FDB3E856CFE52C64108CA839BDA6F88A3
+:101CD00063254DD3B5837D483EB4573DCFE9BB9FC7
+:101CE000F83899EF27CCC4037685C815E7E41BD5EF
+:101CF0007EE2F3E47EC4454E261BF8798AD67EB593
+:101D0000C691A871818614BE2F38E542FF57E6764A
+:101D10006B72670EE6A7ACB42B182F9065AF757A7F
+:101D20004EDFF75D3E035154EB4B9A164F14D5FE30
+:101D300021A5CCAD29A795A76BDA0FF00FD2D467F8
+:101D4000D45CACA9CFAA2FD4940706C66BDAE750AF
+:101D500001509707375FA9693FB4E56A4D79F89656
+:101D60009B34ED2F0ACDD7D48F787289A67E64EB91
+:101D70004A4DF9925D3FD2B46FE4715F3D5E2673C8
+:101D8000BC361A99DE69B015623CB2D1A68D4766A1
+:101D9000F37625891372210EDEF861412EE0FB6592
+:101DA000C7788C8BC7E20BBD1E8BA53FF5CF2F4BA1
+:101DB00061FAEE8B97CC069083E5BBA9BC5E42CB63
+:101DC000B6F736C09A9AF3D879AA91B0FC1E71BEC4
+:101DD00022DEEF395F317A597CD561239BA2F04531
+:101DE000768A1235FE29F82816DE1AFA89B7297C78
+:101DF0001DDF156FEF4B2C3F55ADFF774499D79AF8
+:101E00001416DFA2F6655E0AF37746C7A327EE44F1
+:101E100079BC50FD2FE641F5FF9214F443DF98732F
+:101E20002BE8FF9D162FECC9BE287FA3FA0105DA27
+:101E300057B3F6066F2ED02556FC7B4D4A9FF87798
+:101E40000D8B7FC76BF0562BE45D17876B747C8D11
+:101E5000F1EF46B337B73FF1EF5AD031294007C60B
+:101E60001F3DF4E5F1F358FBA000217B25D8F7D8FE
+:101E70008C0A9C739D6F5F4BF7B3B9709EDA02FBBF
+:101E800026D53E87EE6FF9FE260EED02B57BF7A64E
+:101E9000A0DE237B15FAFC0CDDF76E52A028EC9F28
+:101EA0004FE3975B88D76A96919E0FA6E07E97AC2A
+:101EB0008A93215E16DE3721E73BD9F3ED291760BF
+:101EC000CFC9F9CFE5D0EE94D2F5AF8BE277E9CF69
+:101ED000E17AFC6FF0D3243C8F433CADA77611CE62
+:101EE000E3DA53987D5E7F88ED93D71F99E541B97A
+:101EF00049293AE7395C7FF5CDAB297DFCD25753B0
+:101F0000CEE1978AF5AFE4FBDE29725E2BC41B4F4E
+:101F100044CC883799B0FCC8BA3D2612427AB23C0C
+:101F200063414753644307D86713D1E7152B89B042
+:101F30006ED31E19F5134966F541626D003F27B156
+:101F4000586BB75C3EADDD4A9AE6D6D931ADDD4A75
+:101F50002BD7DAAD017EADDDCAA829D4D931ADDDEC
+:101F60001A1898A8B3635ABB35B8F96A9D1DD3DA1D
+:101F7000ADE15BB476EBA290D66E8D7872A5CE8E75
+:101F800069EDD625BBD669EA0BC29B34F5A3F6DC16
+:101F9000A3298FE9F80F4DFB457B9FC3FC9BB1073D
+:101FA0001FD5B41BD7F94B4D3B8AF00EC8D35E80CA
+:101FB0002421E4D263CF6AEA17703FEDB2EEDF6806
+:101FC000FA212D2CDF3A48FF037AFD95F8CDE09CED
+:101FD0001849F7AB1994AECB4392374C9B2DDEB525
+:101FE000A308E6F1D9E12BF6403F8BB668F3B417AE
+:101FF00087B4E53A322811F4431DE58B10E593A52B
+:1020000090BFADD26B4B49BD03F321FAC9678BF684
+:102010005E4330EF33E8EB80FC74B14EC16F3ECECF
+:102020006F627E62BD4BA9DF17567AD7E9A3FFB175
+:102030007D64A719F8B67A9744FE43EABB9E9AB628
+:10204000BB37644459977E1D7ABF734CAA368E3DC8
+:1020500045B6615CFFC49BB297C507B572B8722FD5
+:102060008BE7AF7C5AC2F89A1E1FC22F8D85173995
+:10207000C8F60975C9241452C99FC2F161F168E517
+:10208000EF04FC03E6F3B01C82BCA038255ECF6FE2
+:102090004561D217CF09B95A39D5E3D9EE4D8FCA68
+:1020A000570AFD0FE6514DD8B9949EAFF4785FBE44
+:1020B000EB6E33E8C50BC5FB8254EDF9A0383F2821
+:1020C000A1AB3547C9831378A5FBF225A929B1F740
+:1020D000ADB7A45EF0BEF596D47FEDBEB521F51C7C
+:1020E000F1B32E889751BF521F2FEB1B1FDBFD95BD
+:1020F000E4C038348B7FF9BD5696AFA2B393B91EB6
+:102100008D9DECD9F77E28851A69E7F50E5F0BAC3B
+:102110006F85C37737C0990EDF3DA92AFC3452BCC6
+:10212000E0FD1C6AA77644F10FF7A50ABFA80CE3EF
+:1021300022EB4B587B7DBB5FA7B2FB40ED29451ED0
+:10214000F43B8F1430FB692F3AA7DF79173FCFB9E3
+:1021500003CE0B87F6E6F1DCC9CF55A8D8F9806E1F
+:10216000EB4D651E759EEF83A92E1CCF31EED90E67
+:10217000C8776E741A9C9202FEB301CF459B7CB661
+:10218000693BF3D87BC99AF7D8BD2319F00DFEBC83
+:10219000CDF8B59A6FF7515C42BFB1D6B92F95F91A
+:1021A000BB26E2B382DE15E7B9A60F0BACA06F8D9C
+:1021B00092D7192D8FD3C4F3A426F2F35CD9C9CEDC
+:1021C000777BE4FC3C7952373BFCAFA9F9549CEB9C
+:1021D000CE76F8F6C1F380316801FF32608DBEFF24
+:1021E000FD13A7E35DB03EA4A70DF908C797FB1543
+:1021F0003FF9732AC6E58298AF78ABEC3D06F1B99A
+:10220000FEC6AB3E4EED13AFFA58CD877AF9A3FE6A
+:10221000E72789908797986EC4ED84D19B0BFCDFEC
+:102220000CFF1E87F1D5CF61DD7DF24F1537CFA7AB
+:1022300055CE994F2BFA2977F94EA5B2BCBFBFA551
+:10224000B2BCBF2659D58FE33CFD503CE5D6DBFA46
+:10225000853F396D0CC6358FB160C285C5351D69A6
+:102260007DFC4747DA39FCC733878627C279B288B5
+:102270005BE9DB59034999EAFB31CD2EEDF81B0AE6
+:102280005979001F777922E3FB91698C8E220F50D8
+:10229000C4ADADD3890FEE3BDCC3F3B3453F23D3CD
+:1022A000ECD83ED53D71645A0A9CA749B8AFDCE032
+:1022B0009234FBCB4F524B46C27A86F3FE47A6318F
+:1022C0003EDD3688C567F479902778FB13A9131192
+:1022D00052825D04F834CB72543C16A6B1F97F9259
+:1022E000C8E45BC4CFAAEE67F7BB44DC4CC4010969
+:1022F000F1BE9D40F5CA479B4D04E25A0B65DB06D3
+:10230000E0C39EFB73FC5CDD49FF037B5999578654
+:10231000F947DFF5FE16E033C1DDD75E5E99D6E3FF
+:10232000A7782FF01ED7ACB40B386FEF8C677CDB2F
+:102330006DB7613C5BDF6E29E787CD3C4E01FA1A31
+:10234000EC865B26F5D1ECC7528EF733872C3EF432
+:1023500063A6C5633E8738FF3052FE4C74631A781B
+:1023600010A035909109F7897ACE3F1482EF25D9D4
+:102370006CF89E5121613B5C09357A25C82FEB34FE
+:1023800077AE4F83F95E2679E1FE405A85B33D2D45
+:1023900019EE112A28661B7288A318EA0B0C58EF55
+:1023A000BAD6B9C10479D70A81936C62A2E3D8E99D
+:1023B00038F7A6E5B07505AF694FA3ED12956E32FB
+:1023C000280FF48873AA07E4B89CE5AFEBD7D7C40D
+:1023D000F9D5B69EEE1B001F4AF43CF0A63483C824
+:1023E0009B6F047E2D51C84E762F8AE5A1429A3507
+:1023F000E60B7A59BE7402E41B0D667A06EA7FEAA0
+:102400009AB411DE13F225737C03DFABF3E1EFE541
+:10241000E324E9E453E0930ED000F910C6E904F98F
+:102420007A6645F4F93EC3E9BCCA51F620F0CFCC38
+:10243000090D98E74EBE397B562E02A797C9097D34
+:102440009F401C222E99E9DF3845417D4C9C12E6C5
+:10245000995A156F0D94E36CE39D32D83D0B3F2FD5
+:102460005C6020462A6F93783FBE72227D9CCBE24F
+:10247000AC4CBF1AC9C7422E648E9C22B09FEC8F11
+:10248000FA459B13E87A26D9F6E13962DC90FA1214
+:10249000B857F0CA3CD6C73D31F2F63FE17ACC2DB1
+:1024A000FB3D06F0E9837F79EDE50948E78BE1869E
+:1024B000E61DA6CED7F65CC6E3E7982FDEF99A2F85
+:1024C000EF9FCF2F7F2DADF3B5A6BCEFC2FF5E0906
+:1024D000F4F82794B160DE7AFE17FAECA0EC3F78AE
+:1024E0001BC5FF7594A90285008DA402E9CDF28772
+:1024F000AEE5780E7E4DF16CEDC5F3756D7B117F09
+:10250000074D74DE747CD344866AD38F12793E46BD
+:1025100008C7BDDEDA3205FC9B2E73773E8CDBF5F7
+:10252000C23B5941AA4F0EFDF8A49D50FEFBC0D8F6
+:102530006D87E7C756BF61F751BC1F5A2DE3FD37C2
+:10254000BC97ACCA07FA9CCBCB959EB2A3C057F3FD
+:10255000D67E5BA4F6B3492005EDEEE2900C777CC5
+:102560007BF4DFD2271338D3B1F2B2D6244D59D839
+:10257000E36596E8F7C40779985C2C7E6A9B19F2AC
+:10258000E1AFF4F8FF06E31FE3F906C776DA717FDF
+:1025900025E633FFA90233EC273F68B39030F0BD46
+:1025A000B1C344304EE59B2E51BEF5733ED4CFF3FC
+:1025B000D51713B0BF85F7CB1847AAA46305285ECB
+:1025C000FD6D8BD9FE56B78E858794A9A0AF166E88
+:1025D00094485061ED5753BAF903B7E3F98A7E9DE9
+:1025E0007AFB729AAC36831ED1DB9705C4DB3C01C3
+:1025F000EC568BF6F9A2B63BB0DF45E7398FF178A0
+:10260000F8FEAC888C3D3B18E2CC83305F3096BD41
+:1026100039B69609E5A76BAD088FAF75223C0ACA9B
+:1026200094E279E9AEF6573350AC3B8AC00EC5ED63
+:102630009D64BD89F4FACFC66DD7841F52802FB533
+:10264000F990151CCFC27F5EC4EF199CCF7FAE807E
+:10265000759E231FB2A29FF99027F68CB2C2F3F1A8
+:10266000021F63293ED0FEE61D50C8F9ED6F2CBC59
+:10267000C47A6F197CE7200A9E85DC1CE5FA7DC1CF
+:10268000F6591BD2E9041A5FF86B7627F2258B43C3
+:1026900088732AD9B3A103D62F135DFC2F48DE24FB
+:1026A0002AFED5F3E722E26576C7C6DEB3F2B84468
+:1026B0000F5FB6DD8978157C04370A0C1E80618FA8
+:1026C000A1B8EF7703FA7C1FA0455BFEC2D4990D39
+:1026D0007A63912E5EF085147DFF35DD3388AD5F22
+:1026E000F14D85BC8885A46C038BABB7A09E3A6680
+:1026F0006C79F53690E7ED4C9E963DFFF4AF414F77
+:102700002DF9AFFB1DA0A73E31B6A4C278B58FAF9F
+:1027100077805E3F660C3AE0FD4F4272D4FBBA4FC1
+:10272000787ACE056C9017B61C590C042C3803F43B
+:10273000E4DF1E3739218E5AF7A4256CA1F858BE64
+:1027400093E191968FB0F2ED88AFBA5D5A395CF2A1
+:10275000C4FDA90AEEE783191C7F19A0AA976F3759
+:1027600061FEE8F237652F0C5347BA717DFAF761C5
+:102770001E114AB7BA56B9D29CD8B79E7A3C669019
+:10278000B3BA9D8C4E753A3FB386EB653DBF3FE0D3
+:10279000E17E26E7738A178C87897C561262FAB924
+:1027A000F1170FE41FA1F33ABEFD358794D7CBEFA5
+:1027B00004B22EC12F6FAD9A077906B1F8FC0B2E2B
+:1027C000173D7A9FDB1965179D18F8FE6D0CD69A98
+:1027D000C28E4B293E6AB799BC41FAB8F669D967EF
+:1027E000033FE95D0B7EDF61E9D3AFBC3D9ECE6F59
+:1027F000E90E53F274B60C1BE86741A73AE0EFC24A
+:102800005EBA2C79EE1533E441C2F3D5EE5EFA2CB4
+:10281000DDD16E86BC4A3D1E27B5B69B997CE9E8A2
+:10282000D47A642AD8E5C65F9C31031F7CF2A244A7
+:10283000C085D4BF5FB3ED1507E80FC013D80F41B3
+:10284000AF1EFAF5A15B78C66F46633B279CD3C4E5
+:10285000A25F00E63206F9FB99DFD0F16BDEB378B8
+:1028600061FD35CFDCEC8075FCD558CFF8FC91F5D7
+:10287000A9608F6B4CC1542742F6BC66EB0F90FFEA
+:1028800016BDFE8354827AD33700E497AE7300AC52
+:102890006FE1C3D7E1FAAA891FF9AFE611B90CFCC1
+:1028A000C4D346322D9A9FAF0C60FAE9AF8F5A70AD
+:1028B00053F0573361DFE1F893CCF2F8C80AF443E0
+:1028C0007EC0D74A3531964F5B199D4E79C4FD7550
+:1028D000A6C7EA78ABBAEDB7A31EFB34CB9706F2D6
+:1028E0004EF1A08DA7BE3E258DEB3FFC5E0ABE4794
+:1028F000F96E123C87F61D265F5CBEE63D9ED7CA88
+:10290000C65FC5C7A7F38E87B8DC5F53B5FB570119
+:10291000670C107A807410357FC592FBED1B91AF68
+:102920004EBDC9F4CAF2D0AC6958DF610AA7417D37
+:10293000A8FD5A09F502F52FA2C9F57613976B6D1C
+:102940003D9DA75152E3F745762FAEFA3EDA4EE5AC
+:1029500087F4F28DB9F7794EAF7C8AFC8A453AFF4D
+:102960004C40BD5E481FA0B57FE27DF2704AD47B2B
+:1029700058BDFA20887C516B0AFDFC3F408EDFB5C4
+:10298000E03DC3DAA74DF8BD9CCF9EDAFDF64D942D
+:10299000DF3F6B15F2ABD5B37AF9AD79F63A124D4C
+:1029A0007E3F4B2E2351E5973E8F2ABFC92C7FFFD8
+:1029B0007F5BCF2E8AA167270FD0EA59EA4F245EAA
+:1029C0004A8B9FFE72E940DC67E9F02AF0A9D79BA9
+:1029D000873C0AE257AF37E9DF9B448547813FC117
+:1029E000974BFE73198ED3C3BF823F05FFF6F0A746
+:1029F0007EBD5A3CEAEBE3E0CE514A2FDD4DEBE8D9
+:102A0000FE1ACE5D5F90F1DCB54BE976B8212ECB96
+:102A1000F36EBA9CBCEC62E5EE14F306D01FE279CB
+:102A2000771CCB43E82AEB76B8547EFD9136D9016A
+:102A300079F59DA1E8F91298499102B74463D53719
+:102A4000F0EFD6D8B203B02F6B61E73D0B1A6E7072
+:102A5000803FDDD536786639F8F17B65F4A9BAE2B6
+:102A6000797E55D0671C40F15AC5964C8E91E04F47
+:102A7000C1CFAE6A5B3A1D368D0B366BF1516DBB23
+:102A800016CFB3AAEF33F5F205017F2764063FABFB
+:102A9000E661EDF325905705F4D1F1911FF828CAAE
+:102AA0003D8C3B051F159002B64FE6E7555CAF4DD8
+:102AB00091F3669643FEE21E764FE2449B4C36C08D
+:102AC0007A9FE2E757C114E4CFE5948FD571CEE346
+:102AD000C067C363DBEFE3BF3A54741B6D52FBEB7B
+:102AE0003FE73F44E1F15FBF3BECB7507EFE9DEC1A
+:102AF0003F93BEED27BDF8D55CCCA37CD142605F8F
+:102B0000D4F5E2EFB36F83F26F2C5E9867D73AB6D5
+:102B10003F0EBE6847BBDE95C5FCBFC617CEE47747
+:102B2000A27D6A427AED1AC0EEA99E68FBFB61099C
+:102B3000F2E9DAE8AAC0EEF27D57DD6FE2707FDDE0
+:102B4000F5C219CDBEF2BBAE6739BFAFD46527E57C
+:102B500070BFB8CBC5EE77D6FD76DC63705F71D9F8
+:102B6000CE767315AD9FF4BB6FF341DF743DCBFCA4
+:102B700009EADF6E05977AF780039B4D14CF5F80DB
+:102B8000CF974EF71FE989A5700FA32F5E181EBAC5
+:102B9000281E605D142F35A02763E1E3BD01ECFE24
+:102BA000C8BF1F3EBE9C0BE3D7B68D25104FEFC5A7
+:102BB0008BE463CFED987741D7CF9EBF78261FFC7B
+:102BC000A3F3AD37F2FFD97A53D3FF5DD7CBF87DAE
+:102BD000EB00667FF47CDF97AF9FBF05CBCFD8BDFE
+:102BE00038DF7ECA7B51FABFABBCFFEFD0FBDAFF08
+:102BF000B3F4DECBE96D77C2794AD70BDF66930B6E
+:102C000058F7CDFF47D7DDE3E718BCD6D1747EEF88
+:102C100091D0752552EC3CCE50BA761F3183FB1112
+:102C20003392ABD17F98E163F1954652B807EEA994
+:102C3000057D329E3B60320DC543C7B50521CCDB17
+:102C4000320687FE14F2B8AE5FE665DFF9D2EEAF6A
+:102C500066A44E9B06FEDBFE063A2FDA6EBFDDE071
+:102C60006CA44B98E993D1DFA310FDBCB7265E8519
+:102C70007921338BB5FB8C9B74FB861BCAB5F5D7CA
+:102C800093475320FFEEFA1A13E60B5DA76BBF269E
+:102C9000DD89EBBC81D4AF67F1990BC353473ADBB5
+:102CA0004FF6C5C3B9F1D6074F7C3F89B93C4A5F9F
+:102CB000BC59FC6C7F69A115DCDFE279722BFB85C6
+:102CC0004FC2F79D163EB4C0AFC5C7BED7A9EA171D
+:102CD000F122F07EA1F81674D2E35DE057E04D4F8B
+:102CE00087C7E04C42E58FF7429147E227EA7CCB69
+:102CF000193D7EA30DF178603BBBAF70A0B86A733D
+:102D000001949F92D05F3B3D6114B1D2F5EE3791B3
+:102D10005DECFE974F7116F5E6B348C5BFC7730566
+:102D2000C82754EF4B219F50BD2EC8275497219F91
+:102D300050DD1EF209D5F5904FA8AE877C4275197B
+:102D4000F209D5ED219F505D867C42757BC82754E2
+:102D500097219F50DD1EF209D5F5904FA8AE877CD4
+:102D6000427519F209D5ED219F505D0FF984EA7A79
+:102D7000C8275497219F50DD1EF208D5F59047A82B
+:102D8000AE87BC417519F205D5ED2F8FBCA42997EC
+:102D900090D734ED2759DFD094A738FFAC69FF7D79
+:102DA000CF479AFA2B94CF34F582FE57E59ED43C58
+:102DB00087338B6011EC63D85FA9F7EF9A7E8CA400
+:102DC0000CE3CC66528FD00AF15B0AE3492B421B1D
+:102DD000157380570EF35F9C01FCBA35B801986BF0
+:102DE000FFB833D9A0FF0F4CB886C51FF839C14CC6
+:102DF000F8A7429938E19B4CD8D78A734F474426AD
+:102E0000E151940F2312426724818493281F46E2E4
+:102E100010BA2349F83C29E242981CC9C0E729911D
+:102E2000010853238311A64572107A2223100E88BD
+:102E30005C84303D320ADFCB881420CC8C5C8ACF96
+:102E4000B322E310664726E1F3819112844AE42A13
+:102E50008439912B100E8A5C83ED064766211C1283
+:102E6000998DCF87466E44382C52857078A41261B4
+:102E70006E6429C28B228B115E1CB919DF1B11599C
+:102E800081302F721B3E1F19F921C2FC4823C24B0F
+:102E9000220D08BD913BB05D416423C2C2C8BDF89C
+:102EA0007C54E46E84A3230FE1F33191071116459E
+:102EB0001E433836B20D6171E43F118E8BFC02E186
+:102EC000F8C873F8DEA5911D0827447E8BCF2F8BA1
+:102ED000FC37C2EF4576E3F3CB23ED087D91D7F0C5
+:102EE0007949642FC2899137F0F9A4C8EB082747C4
+:102EF000FE8CCFA744DE453835F211C2EF478E2055
+:102F00009C16F90CE115914F105E193989EF5D158A
+:102F1000F912E1F4C8DFF17969E42B843DFBFD0986
+:102F2000B1EE25FA0D6721AE6573F7EB3B5F846C5C
+:102F3000D19C4B3D90E0403D397335CB23D9507245
+:102F40007232FAB52B2C0AFFBEA64EAF7E6303FF8A
+:102F5000613DD40C607D401EE01CCEBF078A77A780
+:102F600080BFB4A1B0B316E22177E6745600BC2F3F
+:102F700083F90D776430BB784F068B97560E73B28A
+:102F80007B062B86E2F91549EEDF3ADEE4F659B40A
+:102F9000BF398B976DDDD9782FA09FFDF4B7DDF990
+:102FA000F2A37E98E17F2203FD22FDFDBC7EBFFFE0
+:102FB0005FA827FEF9F79F3FD7FB1F707AA564969D
+:102FC000FD16E769F4E543FDC47503E464DA4FE5F3
+:102FD00066C90976B2AAA9602AD0AF90F8309E38A7
+:102FE00027465E5727A7DFFC7A1381B8E27C85600D
+:102FF0003C77FE4E96E70B71D052CA17359C2F9640
+:103000006DDC610617B4A67E11CB3F0AB1389395EB
+:10301000FE07FCBC64F32CCC3F5AFAA436FE540BDA
+:10302000711D19CE91B5CFEB789CA9CFB9822EBE78
+:10303000F46E068F2F7959DE11913371BDA7E97AAD
+:10304000219FC37F8BDD0AFA9FE201CF49C4FA4575
+:10305000BC52E081F4BDCF8079A127F60CC53CB508
+:10306000138A9206EDFC549C3A6C90FFE01F0BCF44
+:1030700029FE309FA4BB2101F3918E507DAE40E22A
+:1030800093D33F16BE9FD6F95E16E1DF6FD49E1B29
+:10309000583763FE75A5890E4CDB553E9E84F71F9D
+:1030A000697FF9BB201EF9B809F3818264A58714F2
+:1030B000F73D57285B6F42FE98BFCBC5F2C382BE77
+:1030C00037215F5FD0E348D3E0A9905734BF39A7D9
+:1030D00000C36EBB4CE8E789F35241A7BE79D165C6
+:1030E00089F07DC425CDAF233D29BD34F5B59BBF07
+:1030F000C4FB03945E4763D0EBE8B9E89598A9A5B3
+:1031000017C4956F80CAD54928A715EBC243EB5564
+:10311000FCA88FD3934C1BDE7714F9C4D3D2193D8E
+:1031200088D19B0A743DB9790CD24B4FA769FFA88F
+:10313000427A90F7ECF8BDDD3983C9BCABE9F3798D
+:103140003C6E39A7F10AF49F7333991E3BB0167297
+:103150002D09797DAD95F8A8F3FCC65A2796DF5A5C
+:10316000EBC1F23B6B1584EFAECD4578D4CCF27950
+:10317000843C5106C0BCBAFC4C2647F999625FB545
+:10318000CA0371E969FF78638C0155A367C6942C63
+:10319000F4BB35791AE5D76AF3303A4D3CCF6BA3CF
+:1031A000E485EFA8CC2FBB54D39EE48EEA2D83FD9B
+:1031B000E07923F39B5DF8FDB61BA72769DA5FDF93
+:1031C0009CA1294FCD5410BFB3A60DD63CBFA96218
+:1031D00084A65CC97F378158E30DEAF329EA19B167
+:1031E0003C6F276B7BAA7E6CDAAD74FC53FB4C58AA
+:1031F000AFA7C7517310F7E3C1472D5EB043C7E0D7
+:103200001E192D1F7B4B467D77CC44824EAABA8F68
+:1032100049A409203132793A7D90C9D3B47FC804DA
+:10322000F6E1E497163CBFABDA229120DCA1EAA6D6
+:1032300098A7E3AEFA8505D7BD608B4CFC785F4953
+:10324000698573EB558F0FF7C2B9E59CC1E12CB8C6
+:10325000B7D7FDAB38EFA3B4B6AA93BD7F8CEEAF62
+:103260005D90972415E2F9C1E7A52DD506C83790E2
+:10327000F7A5809C7EFEAC8CF194C52BDE2A728271
+:103280005E7BB5F5ED623ACED11619C7FDEC49CBA0
+:103290003619E5DD9706DF75ED5D7708E30CAF794C
+:1032A000CAEA32291F7C5A1DCA47BDB39AC5B7FB6B
+:1032B000E287AE17E80DFCAAD263BD768B9D9351D1
+:1032C000E53300F44395C98BE7A647379BF03C8F65
+:1032D000EA7F3CFF3FDA926460FAE759E4BBF946C3
+:1032E000C5AC1E77FE66D9C77E174231C37CC9DDE7
+:1032F000B29F8C8532CB5708364B7E765EA3A5EF06
+:10330000CD2BC6E2FD627DFE94805F5099F2ABCE7C
+:103310008196BCC0CE67C9E84EA33A7F5CC457888B
+:1033200087F52FBEE3533BE8819F4CA0F0848F7D4F
+:1033300072F0F4763BEAC7E386978A6EA5F0B3D2C3
+:10334000E0C7464A977AD9FF5026E4EF18366F95C2
+:10335000F05CE4A39FC079FCA74F9BBC28863C5F30
+:103360006BC92F170F3C577E10CC809D2F8753259C
+:103370000F7C959760FEC66CD2CAE3032176FE0FE0
+:1033800093A0F871D6B273AC8FC6D837C13DDC2A92
+:10339000DDBDDD8FF8BD856732258D7D3ECECB55F9
+:1033A00006269FE445F6FD45C87B19A2B2A7429FB9
+:1033B000BE90C9F2497AEC2A6945BD52CDBF0F5C77
+:1033C000FBA485DDD3518813E47131230FF90AE49E
+:1033D00099CE7789F9E99F023B2F221D68E73E3598
+:1033E00085AA3B72E0FD6D4D6E7CDFE40D81FC72C1
+:1033F0003B60A58A03F4C722C2E6B7AC450A8555EF
+:10340000710AF17B1C04EC824ADFF4B5075A3BB029
+:1034100090DBBB854497EFD3A2B54B6509765CD7AB
+:1034200092169EF7DC332F999CA538ABF6875E9DEC
+:1034300081F396BCA128F35844BAC3F01DE0654F50
+:10344000B1FB40FA79E9D7D1DF79567B674D86EF3A
+:1034500009F78CAB9BB7C037810B4A2A3A08BC5797
+:1034600007193EABDB24A4D75FB85F25EED909BAB4
+:103470002F22653340AF2DBA8FEE0B737AF9A0C7B8
+:103480005EEF08A1BFF4196971D828FFD76ED97112
+:10349000FD3878EFE1D7CDC0DF15EEF050838BEE2D
+:1034A00017833FFEC9B4AC28F65D67CFFF55F821FE
+:1034B0003CCE84EF517C2CDC2E635E83AA1D3FDF63
+:1034C0000F327E0E12CC23AA7953F636D2A735F0EE
+:1034D000733E85173E5F819FFFED79EBFD98DC2CF5
+:1034E0009E6F10C38FD1EB973E7E8CCE7EC2BD09FE
+:1034F000B097DD292C0FFC94D197E846BDACD3BB27
+:103500002985F8DD51A177ABB9DD13E32C047B47A6
+:10351000CB1F6F79CE01F187BFDCF75C2AE65180C3
+:103520007DC9EBB52FB754B1F16E793E0EF3963EDF
+:103530002FEDC807BFAFE291DF3BD4DF35ADF3F825
+:10354000A766C17CB93D5C266FCB76823D0C44CF2B
+:10355000ABE8B3FF8AB54EFB79D669D7AE733EAC04
+:1035600053751FA48AAFF3C366B6BE8F36B3F52E6C
+:10357000E8B3CE209E83DCF298C51B443F238C76B3
+:10358000FCD80E99C0FDB31E3F4367F74F9396AD2D
+:10359000808F652BDF396CA47CB17818C50FE5836B
+:1035A0008ABB2D68E717FF8A9D7F7E2A95A4E101DB
+:1035B000FCCB61C70FE9F325D43F00FFA2771E3D86
+:1035C000767F7996DAEEF7137FCB791C6A79DBEF99
+:1035D000F1F7A2241FCB875C2EBE03B34BF71D1857
+:1035E000057400BB276F053A651285ED13B5F1D45C
+:1035F000BF0DFD72EE4AE4FFEE61EAEFF5D6C58736
+:103600004D90EFDBBD4342BF68D9AA12470981FC48
+:10361000561607BB238BD92FC9E7C3BC170BA56B65
+:103620003C1DEF27590A7BAE38595EF7C304BF3BF8
+:1036300023E6AB7F0EF1712BD83F9B01ED9F7EFD02
+:103640002FF07196C906F4A76BCDCCAFEEE2DF7D0B
+:1036500078288BF9D30F6531FF7A1B8F0F74811F88
+:1036600009E7D39759F0F77A08998C71722361FCB6
+:10367000671478731ABFE8916FF497BB33014F73E7
+:10368000498709E839A3789602F7060EA75AF13B55
+:103690004AF4AF0CFA99CDFBD96F62F7040EC31848
+:1036A000745DB3793CF9307C06948E7F788019FD87
+:1036B000D8E00B16F4136E8F67F13E929C68043EBF
+:1036C000BF89EBA939132C3E381F983DE1F63280B3
+:1036D000B4BF20A1F8AAB076AF2FA0E33418989D0C
+:1036E0006F7013BC2F499A3AC700FE2EA16E31E4C9
+:1036F000C9D3D5EF3C9B742E3ED2DE53A885B8C209
+:1037000078C218AC18F1AB29D79A59FD1B8F1C99B8
+:10371000715F26217F826C26B0338023E08BCA4400
+:10372000DCE7CE843C7E374023F2DBD546123430D2
+:10373000D86CC3EF10B1BC7E710E725D310927D217
+:10374000F585F76AEF51DC10368487C3F98E31DCDA
+:103750000EF833581593938E53364D2A04BCD7AECA
+:10376000EBDF7C3F7EE4F88CFB26D0327CEF0AE670
+:10377000F94309F3796653A1073E9D6B242FCB854E
+:103780008C7EC087756E2588ED56303E17F737045E
+:103790005D0A68F76AFCCEE6F3A3FD343BE07D7377
+:1037A000F4B8C9892CB1CF637EDA522EB74B05DF4E
+:1037B0003DA595D7E46C2E37E00F52BCCDE6301610
+:1037C000DFBBB2995CB8B2599EF5B71738DE320B41
+:1037D00009E3BA5FB0201DC5B833394CCC1E84FD57
+:1037E000897908FEAD26F5987F53CDE33106AA49C5
+:1037F000304FB7E531CCEFD7E709510709F3CE9643
+:103800006CD73F57C573648D5EC238A764EE5E0007
+:10381000F393BE17E7057E9F6D6EC57880BE9DA9A8
+:103820004542393735537F4AE2E75BB46CD92CE126
+:10383000EF3BCCCEEC1E89DF2BE77E7535A72BD571
+:10384000DE53E11E5035F85378FEC5BF13B585F938
+:103850009146EEFFCEDFACF5336637A9FC4C06345B
+:10386000F7EA2DBAFC7013F7373E30778F047DAF3F
+:10387000BF67FF8181CD3F984A303F52DCB337723A
+:103880007F52F093926DD29C8B89FB9C15A0A7D898
+:10389000F70E74F95436FCEE4A85C4BF57C9E38A63
+:1038A00027A8BF89DF95391487764BC419BB4AEC2A
+:1038B0004143227CCE9295E724DE3203FCCC0A877A
+:1038C000D908F08CA113C7B955EEB0E7E4F4C6717E
+:1038D00037948CDA027943D7678F9869CDC2530E3B
+:1038E0007EBFC87B00F2D6AFFD86CE1FCB05337DF1
+:1038F000747FD4F54AF75C2B55D1B55B0B661AA9DA
+:103900003DEFBABF7B2B94D76C1D3FD348ED60D7FA
+:103910009DDDD9F00DE135D997B3FA06D1DFE53356
+:10392000213FB8EB41569E4DEB83E0E7F27B40151B
+:10393000E325D4B36BB8FD11F1A30AC34B0C4E645D
+:10394000BFF371BE76B76797AD01FB2CDB8FE2EF5B
+:1039500009DCADF8D680DFD394E9AFCEA670C92CD0
+:103960002968867BF16F868671FB15F5772FD66403
+:1039700031B9DC3890F527F045FBA9FB67FA49839C
+:103980007E5234FD04FE997E8EF6EDA7E19FE9E7B5
+:10399000FB8AB61FE19F89EFCCFD31C7F708F4BB66
+:1039A000740DDB0F93A336CDFDFF93F5CF0F03BB53
+:1039B0007FF2294B12F0E1D267FE3BBB1AFC3FEECF
+:1039C0000F7DD6FEAE19F2BE9747D87771EA22EC8A
+:1039D0003B39CB77B69BA7E6411E6BBB79926A7EDB
+:1039E000B5BDBF7365BC5AE5C73C9A2DF2B5D9EF9A
+:1039F0003A2E7DE613FC9EE05243EBC790E74BC6A0
+:103A0000B3389A7E9D9BF87B87E1DC3F4ABCE0C9D6
+:103A10006CA66FFF31D8F74436851BB309F62FC764
+:103A2000F86ED797BCBF8A78A6C7AB8AEC5685E2FA
+:103A30007BCC9BFE46C83BAD7E38A750A6F37822D0
+:103A400073E20EE82F767CB39BC537DB587CB3C29C
+:103A5000DDB18A1A29723C7BDE5DD6CB08B9EA015A
+:103A6000D273DF0FE286D32CA27CCBCCC91358BC17
+:103A70000CCA07B6D6DD05F2B387FF3EDB9CB12347
+:103A8000E341CE3B73120C4E2AFFBB322A8FC33C5C
+:103A9000E68CBD6C2A3C2FB1D88755B2F838F2C7F6
+:103AA000AE8CB2DF037DA13DC43DFCE670CA0D744F
+:103AB0001DFE3FC89837EDCF4FF047BBA7F20AB7BE
+:103AC00057C7B3999FB6C740E759D83B0F313E75EA
+:103AD000CC567540DC6ADD8002F0A353324B3ECBFE
+:103AE0001ED33B7E4AA6FF2094C5F874B9F9F0BCFA
+:103AF000BFF3788BD3E333A01B85651364F8524280
+:103B00008F5EBF7A7282A67CEDF424E253C74DAF7C
+:103B1000CDD094CB2B066BDADFB46084A6BED4D2B2
+:103B200031BAFE02FCFD3AFB9398DF7BA8EDF4DB93
+:103B3000B3C18FDD2E7B25BA9EC52F3CFE36E45FD8
+:103B40009F809F2029647131F6BD467E1E63F41963
+:103B500035E7317B9F3383DFAE8AF3EBEEE5EDC3D0
+:103B600038BEFE3C46E48BFFB3E7310903F5BFE7FF
+:103B700079FC55BA323269573BD2A7712FCB636EAD
+:103B8000A47E0B7C4FECFB3B2D21F886FBE7FF7DF1
+:103B9000C4ACA8CE65EA220DF8BBBA93761DC173FA
+:103BA0009BA7B89FB4BCED4B33DC93FA7EDB0A9441
+:103BB000E7A9547F2552BEE968272377423C39C7DD
+:103BC0008E79384B9BAFC03875626436C2DA962B5B
+:103BD000B0BF65916BB0BC9CFF9EEF9EF88EA96054
+:103BE00087F7FCDA85FBC1037278D843D08FC58E86
+:103BF000FAA13463CE3AF013F6C407F36EA6E39548
+:103C0000FED7F7310F7DF94E09E3A6A532D923413E
+:103C1000FE7D240EFB2B95FF347A057D7ED5246630
+:103C2000574BC1C7A1F572917D137E4F3AC6EFA4E1
+:103C30008D1DC8FC3A53279BF794C82CEC4FD45FDA
+:103C4000367090E6BB7CA694EDC6F9B6DEF5983AE0
+:103C5000258457464620ACDB39CB08F9E77FC87D81
+:103C60002C19F044DBE3F7C1FAEAE3B189248ADED8
+:103C700012D0C2F5F06CD0C370FE9EE3BB66600A42
+:103C8000FC1E61A7D10A7AD4667582FF32A3B840C0
+:103C9000A956AD4B7EE946BC076149EE3681FD9ED3
+:103CA0004DA15A6FCF8B61676E1C28F47603426179
+:103CB0008F48E407EC3BA83C3E20E469EA4083E6F9
+:103CC0007B3A1D12938BE0AFD8B940698E7FE940F3
+:103CD000DA4F4709297F16F5684736DC47FF57CD8D
+:103CE0009FD2D70AF477183B09C431EAF97C843CA7
+:103CF0009F6FFE7379FB033209005F1CB8FCF20E64
+:103D00001F9D57FB6DA346815D10E3350C6479A6BA
+:103D1000C4D9FD0DE61BBE98A0405CBF14CE3C4646
+:103D2000F7FAF3908F08F1C3BA172D8FC20752EB41
+:103D30001C747F6F83BCC0B830F06DFBEFE28C6009
+:103D40003F0A87F81B002F937E377C327CC7C7D78A
+:103D5000663112F4837CEBE079ACF99E4F7F0979F0
+:103D6000D4F399BF99C99F9FCB6125E7DBF95C0E1E
+:103D70002B8DDE44388F99B74FC67B91F3574B2379
+:103D800077427C40B1E33D7D218742DE4CC097A362
+:103D9000803F195FD6465C5CBE7378BF4C0E4A65A7
+:103DA000966F573AC285FBE7E591246C27E455C826
+:103DB000E91D39FE1DC0D7A58D54BEE938FE750337
+:103DC0004683BCF4F289D909FC44F9C453ADE283BB
+:103DD000C6F6AF8CC027A60912F28985C2492A3ED1
+:103DE0002AEBF14F9C5353E93C6634E5E0F79445E8
+:103DF000FDAF7BF8A57FFCFE18978FF9B6F050F069
+:103E00006B4DF5715EF88EFC896405F5D8CA8D128C
+:103E1000FE38E14A53D924F02F563E28617C0FFC2E
+:103E20000ED03F4507EBCDEA73901B23F9785E7DFA
+:103E30004D6408C22732FD2F03FD2B23D7733CE6C8
+:103E4000473DEF3B557F3BC6D54E852C5EF69D31F9
+:103E50006DFC6E8CCF8BE77FA67D26B24D81B89B23
+:103E60005FC6F3BD2CE2BC5762F13B88E789F89B43
+:103E700038A71371380B7C0F5765474F1B5BB26136
+:103E80001FD2271E57C2ECFEF1ED26766FABFD4F19
+:103E900045065AFF698E0FE372AF79FC87613D4B8F
+:103EA000AE0E3D63A2E5A5773EE78078B9C067AB6B
+:103EB000313C14F64BAD148F101F6CDD2C4F0B31C1
+:103EC0007F2761962ABF22165F2F890C46FC087B4C
+:103ED00023F4F7F36B3DB829157AFC7C7648F0F7AC
+:103EE000322E07CB400E88DADECC2A83DF3523B9A9
+:103EF00012DE73EDB5374C1E849EA6FC8E72533ACB
+:103F0000380BE3EA426FEBEDD16EB9F5DEF1C03765
+:103F10008ADFA950FCFC0F4D62B3890080000000CD
+:103F20001F8B080000000000000BB55B0B7854D518
+:103F3000B55E67CE9C994932AF3C0986C43393077E
+:103F4000700D383C22E1E1C78140002138C15B455A
+:103F50004D65402411131250AE51B8DF9C90808003
+:103F6000D486EA55DA824E28285AB551B0C68A302E
+:103F70003CB4A15A1DABADF456E8A014791BB15660
+:103F8000FCA472D7DAFB9CCC9C4982526F874F37D6
+:103F9000EBECB5F75E7BAD7FADBDD63E8789BFFC50
+:103FA0007AFBFF0240ED8B4F4F820C8009570920AE
+:103FB0000A00339747CD36A4C16E736FF5205D3A82
+:103FC0004C5E500C70917EE301C4BD5F49F210005D
+:103FD000EBF24A50EC00B7625B668FF54B004A3B50
+:103FE000D20051F32C47EC79A66CC2FFD1F32680A6
+:103FF000129C57E73BBF14E01A80DBDCC07F8DC802
+:10400000D41FD7217EE49B6A85397E5C1FCC91BC8E
+:10401000F8F92A3C1307CAC85A2C0B6CDEFF2FB9DB
+:104020002B44B00969004E7314D28A697E5D6E9587
+:10403000AFF32D725FA1F1BF2342633B8E7F67FC1C
+:10404000F8888272ED5936628428C7D61B2F5B1818
+:104050005F453A8E1D09D0F59A35B419E5069C4F97
+:1040600040FE4F5F1B1C5A8B5B3B0C5D17C83EEA42
+:10407000CE1499F655BF2B85F1D727BB4202F6D750
+:104080003BBB8AFC284FD9EEA4300CC57576279926
+:1040900001D7FD26FFF6F1A49FB2DD0327094E14D8
+:1040A0007AA7D50CC8F7409EA2D0F3BEE4D7E54B63
+:1040B0006CF5FD97570AAACB0530BDCCA19AB05D2F
+:1040C000783E1F6004C05DABA7B1F6E560362A19E3
+:1040D00060F2F94A00DC5BDDF91BD8F345E75318C1
+:1040E0003DFDC14839ED075E16602BCA5F91F3C3F1
+:1040F0001580F27526C3901DB8AF4E6FAEAF9970A4
+:10410000D93A8DF157FC6ACA54DAD7A21DC84CE3DC
+:104110000609A142D2D351BB09B200EEB671F13FFC
+:104120006FF860A48CE33F1FE91806C8BA4F6C7F94
+:10413000788CC0ECD949F69CA8E15D3A2F8282F2D6
+:1041400058CF0BACFD400E2C964B181F401AF9436C
+:10415000FF9101FB77C1D32B928C78946A3F93082F
+:104160004F566CCBE2FAE7683849D4E37F5DA61F6F
+:10417000CCFF8E785A43782AF9B7E2690DE9A9177E
+:104180003CADFD3E78BA841D7DE089E16CFA9B1C54
+:104190001F90EFF06D0586172677A72537D48C7C06
+:1041A000B7925D095F17A181F43987EC9B1EC3EBC1
+:1041B0000E4FE0F9783B7726ABC58B8BBF8B9D6F9D
+:1041C000068A1BB766348082CFE7601B1F37AC645A
+:1041D000BFE29EFBDB7E99766EFB8E76DEAFD91951
+:1041E000DC68C791CC7E32D935D1EE6457B27BFD05
+:1041F0002EEBE64BD9757841E09DDEEC0AEE6413B8
+:10420000C919B38BF506C2CDE76133907FF56557C9
+:104210006903D7BB4EAF0C9BA786D87900E99543BD
+:10422000185E22DF072F1565ED7FB7A5029C0DDD17
+:10423000ED378F06B8B114BBAEA0EE7B5A95028A5B
+:104240002FF8F7316C46056C4C9F9C56974626E13B
+:104250007EA73FDCDDAF52FFE4712E3E1EF9715B9D
+:10426000DDFC67424B22EB98DCAD5CDF81A8D93FD7
+:10427000248E1E89B4238E2E4DA037727E3A47DCE1
+:104280006C9E10F74F9C5F184EB43E9FE607D055CA
+:104290009E8AF69BB94370AF457BDF32EE530BD954
+:1042A000A7A22CFA460EEE57685BEEB70FC6E714CE
+:1042B0000751DED4B69656B5401B8FFE53ABA9D13D
+:1042C000DA2E2822DAA9B65408793D3DF598EA316C
+:1042D0009E67F4331BC78365E4E58D273BB2F15E2F
+:1042E000363E6CBD8CF56F1A074AA8973879A587BA
+:1042F0009FFF7001697D7ED4DD0DB8BF502FFE3663
+:10430000509B376232D501EAEBEAB60DADB65CB42C
+:104310002F707C0C6B7BCCAF721C8292B0DF4BC9D0
+:104320009BA9CB11B75FD9383E7C297DE5F4D097A6
+:10433000868F1A235E5C66FFFECF510E5786E056CD
+:10434000D1FE8BFC49EBC045F6D7F1BDD9AF0CC00F
+:10435000FD2541375E8DF8FE859FF0BD0874FEADEA
+:10436000AD742EF94DDDFC1CEF3B85EEF183D0954D
+:104370005DC0C74F6FDBD2AA16337BB07E469B2F42
+:1043800081F7F6047A5C827F68F866FE49711BF556
+:1043900053D84BDCA8D1F47B4680D914F72213798B
+:1043A000BE17F1F276B587E7770D1A5FA36EE7E4E3
+:1043B000383D0C88D9197F611864D837D3D3CD190B
+:1043C000FABEF7FB67A0DF44D26088803859E10964
+:1043D000B7B6C4E1A4C5B39FE12436DFDE08C5FD4E
+:1043E0009B353DADF6EC8B683812C8EFEA1820100B
+:1043F000073B0455C47DD6110E7AD9E7AC9E3852DE
+:1044000013C62BD225C6CFEE395E49180F52C6E52A
+:104410008CD7EC3423C18E5313EC382981AED2E90A
+:1044200090219EE9716E5EC7FA955928C75DDB043D
+:104430003A26285E5B8461009BDA7EEFB7F727BCE3
+:10444000CA520EC6FCB6B6772236C47225C533866C
+:10445000DF48AB8278BB81FC9DD1EFFA1517E1A74D
+:10446000616536F23FD5F687561BB2DED2B25EA248
+:104470009CE6976DEFB79A71DE9B47FEEA0D9ACFE7
+:10448000DCF4A7C80CCF25F0DA9AB08F8D09B49A66
+:10449000C0FFC8B7C4F79684F1CB13FAD725D01B59
+:1044A00012E8D5C6F173E70BCC4FE6A2FD4871DFE9
+:1044B000E6377B347B76FB3FEE40B0B33CC980FBF4
+:1044C000E9CD9C7EB3EDA87FB53D8EF61CF393BF7E
+:1044D000EB389680FF6ECD0095CE0FA98F78F64A07
+:1044E0005F381A9478DEF1FEBFD25FFB53DE098697
+:1044F00073799F68A4F788BADC7F8FDC63A7873A5B
+:10450000FDB99FF2F1E98F19F78575A1467FE69F06
+:1045100084FE3FFDC71AAD76F995B87DEAFCE5FF4C
+:10452000BC28D27A473C5DFE2DB8EFAA89E1C206CD
+:10453000E4AB4AE32D9E33229D63F536EE4FE5AFA3
+:10454000897E3A67AA92C3854B8AE3F609ED45B4A2
+:10455000CF3DCB44661FB599D723F3C067012C85A7
+:10456000F6B85C8D4F22FFBE6562239D6B871BD31F
+:10457000B348FEE15E5EEFED735D997507D27B5245
+:10458000E65864E4DBF3C064D6EE1595555D88E328
+:104590008B6D17D939BF27C5C5F4F3B5E76B7F130A
+:1045A000C6AB6F3C325B3F90E6CEEAA07C75AD04B3
+:1045B0005B6592C7F738C3CD8FACC3D6A21C739B83
+:1045C000AECAA2FC6DDEFF5496F747BE792B259F3D
+:1045D000C0F86028C91D583BD942FDF35BB4569D15
+:1045E000C2DADDDF6C7F7328F277AD117D9B9179A4
+:1045F000D779AF731ECAF571128FC31F9D2E7092AB
+:104600009C8F7A03C95EC2ABD3912CD0E1E1969D19
+:10461000B370DE87F395146F668C7FF737E21CCAA0
+:10462000375F3D3D2F2B8074A697E366D7F9795904
+:10463000F3E2CEFB0567CC4CCFBB2DF23D945FEE91
+:104640004ECE155481E939BD12FD65BE965F235EDD
+:104650001AB7F772EE9BBC22D3EB516B237C8C20F4
+:10466000DEF360E63892531F57F27EA0D941781EE0
+:10467000200F8FCFA3B3F2267A48DE18CEB2DE2504
+:10468000DCB03C1AE9E2CD69EB553A0BF761FE4F1D
+:10469000726428E5D40FCB9101F34EC86E2F8ABF08
+:1046A0008F88E5A92BB478C0F90EA90E56B71E7AEB
+:1046B000362944F5CC21F52F0EB0C7F3733FA97608
+:1046C0003A543A8C3F7138CCA4D7C3E6E0B1FB70C2
+:1046D000DC824D128BA30B36652EEFA27880F62C70
+:1046E000849EEBAEF44A6C9E3EFD44CDAF34F80997
+:1046F000E457D2B9D6979F946FF6566EB1F7ED276F
+:10470000D55ADE5EBE49F213CEAB4B1C66B81AEB2F
+:10471000EC4DAF6F253C562F4E1A6E45C1AB375945
+:10472000997DA30E87EAC6FE80D3614EC5F6560D6D
+:104730000FD1A62456A788591616F7C4552532E975
+:10474000A74C04B30DCF15D1E993FD9C6E7163DDC9
+:10475000B6D2512A937D577865B6DFEE7ED7ECEB63
+:1047600004AC6BCEE13ED271DC89C6871F1D85F299
+:104770009D84D08DA350EFE7C8D0B8CEB91D624854
+:10478000A573C2AC982B30EED500F7F7BA03DB2D3A
+:1047900013F0AF350DD533A83EBA33247D14D56A56
+:1047A0009F8BF8DF17F09685F2DBBBB6199FA3C786
+:1047B00058C8AFEADA8DCFEB61DD67E2506ACD1FF2
+:1047C000450769CF71DDC60FFF3C647F1CDFDD5EEE
+:1047D00047C6312CC161380C47CDE23AC5AE9B08C3
+:1047E000768D2293575C9114223D8A79FC7C980245
+:1047F00042288900E1C67DE3BA5F060F0ED98F809B
+:1048000010EF1FC1F4723488781A88FA70DA18BF72
+:1048100078BF18B2E2BA65E9A0A4923E1FAD047059
+:10482000307DAA6EA4A7643498293E7579B83EE716
+:104830000AE06F677EEFCBA3FA78C1A62466BFEAD1
+:10484000C7EFFCD34F4792BD2A32E2FDE821C25D9B
+:10485000099B0F6C69B1793E69FAEF3C92A7EC09AC
+:10486000AC2BA9DE14038FDECCE2658A8FC52D77D1
+:10487000F447A308274D29C3D602E1A47F9EB73889
+:1048800036BE7AC5B2223E1EEB5527C5AB24B69F75
+:10489000DA1D568693B96B44859D8FB916763E7E98
+:1048A000D492C4E8DA01A5CCCFE69A2040FBC05CE4
+:1048B000309BC575AE72A8B583B2DD4E717E5D4486
+:1048C0007432FBA89ADD2C649FA7BDE96CFD39A466
+:1048D000633CB70E68389B6BE2F8815D42682B8BB6
+:1048E0004F0D32F97F954960712ED11F7F434918D2
+:1048F000C5C93CDF6D34AEEE21AB6F8587CB20EAB6
+:10490000F2209EEA4C91053FA7797F6D65F71AF575
+:10491000B88F2427AB2F941751FE7A33982D742F1C
+:1049200025F378A6CB532F574E219C62FF4133F6D7
+:10493000D739783CAE4BE5F73DE0B085B6C6AF471A
+:1049400032E7F371B293FC6C34C30BF9BD09FB3F42
+:1049500005DE5FE62C95A3F8BCD304ABE99E84E4A6
+:10496000193C346E5DA4FB0F253C2E367B1D6487FD
+:10497000F41B67D37ACF892C2EA1333D544AF9DF3B
+:1049800073E208AA63E7AED957BE81E81786B94932
+:1049900084B9CFBFC7CEA7BB349C4529EFA7F30A84
+:1049A000E917B0FDC8CBF3FB80C8EF713EF2F2FC13
+:1049B0005FD7ABDE5FB74662F6A85BC9F150D7F4AC
+:1049C000019BB7CE11C9227BD4BD245D43B83EA55F
+:1049D000C93DAF2977DC41C4C73CC9E516F051ADEC
+:1049E0005A6121BAB65560B4BE5EDD9A3F66998AB7
+:1049F000F97CD45A351CC5E6CDCCA3F3ECD4B3E98D
+:104A00007973E3EC7EAAE565A76C27BF0917BAE9BD
+:104A10001E6671926F33F3536E8F532D859BE99E03
+:104A200066BE3BE210B07FFE3DF96974CE1D76870D
+:104A30002DD47FB8DD63225A71BBC711AD98AF6624
+:104A4000F4290CE1EDC51A78D14E8B048E9BDA6700
+:104A5000F759BCB89E3B9FEBE7CC73EF15D17D4176
+:104A60005D5EA488CE5FC455510ED9E51981E50974
+:104A70008B9E1595A4A1315C2D225CA1FF2FD470D3
+:104A8000B568C7CBF7929F2E223C0DEF894BAC2B1C
+:104A9000F7B3E72FB695031FBF9F70A79FF748B7DF
+:104AA0004874AF66D1685C87E8D47C99F901F64F09
+:104AB000E2FD6A313B47206AA17CB85EE47902FAE4
+:104AC0005336E511F51D92DA1D2F695DEA2F8EF53B
+:104AD000F7859BE1F926CDCE56761E0DD7F4125DF3
+:104AE000F392937071E6B97D6F8CA1FAEA45C14DDE
+:104AF000F1BE871F6A7AAB273D39D93E595E544FC4
+:104B00007A71C6F4D4ED6F1A2EEA81EB41D74BBD12
+:104B100059D393DEAF8D1FA1E9A11634BDEE18C89D
+:104B2000FD5DF36FFD1CD1F71748E3E3757CCDD72E
+:104B3000F637219F9F9BB5881B5F31C39762B946AB
+:104B4000ABFBB1EBCC0B6DECDE48B7A72EF7F27CDC
+:104B5000EE0718A795D4B4989DA326A8E9ED9EFA70
+:104B6000264D7F929DC795234D39B735A2FE163E3F
+:104B70002BFA98F2A8E68A5BD76A8A3A585E7ABF1F
+:104B8000E8A67D95FDB2F23ADAB78E3B699B60EEFE
+:104B9000184975462AD3BF2E5F593FFF75A91C7768
+:104BA00061924797F3881066F6525F10DC3CCF8D18
+:104BB0005AE8FE50F7D34479E76BF28A4E618C7065
+:104BC00035C9E393C9BF01CF41268FFDE032B69EC0
+:104BD0007A689967686C9DC3AAC34C7C8781C701BA
+:104BE0001D9747B4FB88232B5F6679B0BECEFD3D91
+:104BF000D7093466F45C47E75F92CFCF01DD2F3AE7
+:104C0000D338FECB5A3E607C7A9CA51FDDC3E9FAFF
+:104C1000D4F516E79706FDE8FEA5FB936ED77FD582
+:104C2000AF607926CB571FD0F6CD7C242B762E1083
+:104C30003EE9BCB35A109776C3B9C9F29A29033E2C
+:104C4000B3047A79AEEB29F179AC9E72E791FEA7B5
+:104C5000D8B34D9407404BF6FE82B8BCEC63BAEF74
+:104C6000A2789A09FC7D06A057C69DE77ABEA69F4A
+:104C7000D7F85BD78D4B1C5F9FA19CA0FE9A918BB0
+:104C80008B288FF847BE97E9EF24B45B26E07CB50C
+:104C9000C723E54E3956AF5CFBF7B0E8A2FBC01D59
+:104CA0001E43BD507B7A3FF3EF3A88ACA2FA76EE12
+:104CB0009AF72A4691DD9FC67C1CF9E6B77AD8B9E7
+:104CC0007762CBED23A8949DBBB290D1776EBD8364
+:104CD000D36B783E377765C993741FFF7192524E3C
+:104CE000F8EE5A2FB8A9DE1ABBB564F92DD83FD615
+:104CF00071652AC97D68CBC71563A86E681499BF12
+:104D0000285B1EBE91FA950ED1475B9D0FEEE5B76D
+:104D100010BECD2EE66F87B573A259E2387B578B54
+:104D20001307BA5B8EC3B2E6E62213ADDB86E71348
+:104D3000EEBFCA22B787A9EE7BAD9F6F33E90BCBDD
+:104D4000D46CC4D17181E7DF3516B011AE0E489135
+:104D5000A524FF81A58E614D248078E11AF20B45D0
+:104D6000ABB3B06E62EBEAFAD2D78F68FEA2CFA3E4
+:104D70008FEBA47C8ACE0F4DDE132D4FDF4879C216
+:104D8000896D856910A7F713B42FD4F79D18175FA5
+:104D9000ECA5FE3B94AFDF4784585BA3DD1B1E9060
+:104DA0005A07D0FB5BCCE38FC6E7E59FB425D90853
+:104DB0008F98C71B9F4BFC3CC13CDEF01CFDE6A856
+:104DC00031DFD7EA3BB1CA15E8250EE96D629EDFF7
+:104DD000956FCF387615F4C8F375BF4B1CAFE7F568
+:104DE000DDF72C1FDA13DEC78C72C125D63F1D44B8
+:104DF000C360EDB78D7C17E59D94F2CFED11AA2726
+:104E00005BAD6E2BEAF728F915BD077C49E479A262
+:104E10000D7C61C4C5D13F8EF0911F2EF890FBDD53
+:104E200082762144AFD8F7AF7F4024FE3B360AD0CC
+:104E30004F88ABB31E597F23B9DD395F60557FE4DE
+:104E40003FB74DF0A94C42C59E505FBDD15FEEBB50
+:104E5000BEFABE75957ECF94A8F72B0BB4FACA079D
+:104E60003EA3DE797DBE1BE1533ABCA7DE4F0703AC
+:104E7000AC8E3A1BAC61EDE8F6B6B21C94FF53E180
+:104E8000C84363C97F1C2E764F723AD8C05E029E1B
+:104E9000ED18716126EAE755BBCB4D71E36CB0911B
+:104EA0003DEFC68B86CF6B77EC117380F1EF1C8BD7
+:104EB000FCBBEC2E7AADD1CBFB366E5F8064FE7E00
+:104EC00054ABB7EF5E3CAA1F3DD7F77BF23E6E674F
+:104ED0005DFE93DB6E77527EBAE7E7E93B47937D51
+:104EE000535C6E8251F506110223008E6DE071E86D
+:104EF000B8CDF524DD971EDF784316D58377485D5E
+:104F0000161FCEEB7BADD249F7027F33479D6E6A09
+:104F1000913F4C72984322C5BF315381BD071C138A
+:104F20003683EC61AFE8194E469F3687C2489FA290
+:104F3000F783746E5F48E6EFE9B5F77E77BCC2EFA2
+:104F4000D3BAEF4FB47B84B1DA7E9715A4E9EF7B37
+:104F5000D8F3B252FEFC938DDB67D27C27B6486E45
+:104F600092F7EC1689CDBF10EB7813E2F038E28DA2
+:104F7000E2D7C2F7451F41FAC4365E272F44DCD280
+:104F80007D71DD6249B1B87AE2B14CE7DB29B0FA54
+:104F90005AC7E5422554CEF4AEE1D3867F2EE29186
+:104FA000910AEDAB481F8938FD57EBFE2584CBDE17
+:104FB000E241020E747DE97888E113182E75BBA7D3
+:104FC000B50F9B90C306A82C5EA8136110E505CD14
+:104FD000161864261C98927DE4E78D36E750BA6770
+:104FE000FA3289B7F79ADCAF53BDFCA54996046C39
+:104FF000FF56E061E3EF157D93899632A2EC7E4087
+:105000002C3329263AEF9AAD2C5E24C69B870A786A
+:105010007EEA25B061FB4C819BE78FD0C0F207BDD3
+:10502000C50DE6527E529992F6858C2C3F2F983111
+:105030008BDEE3568E4D5B9A8F99E52F0A66CD3253
+:1050400023AE2B47A4BDE4457AEB163FA7AF4E2B0A
+:1050500091906E126E983509F9F716283F2D288920
+:10506000ADA3CF8BCF37D2F3B7FA059EA0B6DE62E1
+:105070005F4DF1FE53A16B91498CF1BF2BC0E157FD
+:1050800085181D95208FF2E967E89D6A49DFEDD903
+:1050900002655B412FCFE701AC243DCE537F7B906F
+:1050A000F235FCF96D88B7EB35BCCDB3D9C3840BB1
+:1050B000582D9DEEC68597E292CB4CFE3D5333F7BB
+:1050C000F5E6F01E1A3F185ADCC76C2C15DC783157
+:1050D000BDEF388F8E09C7F4F9707F9F4AB85FB46F
+:1050E000ABA0A0ADD1A504547215C63761E76FBF60
+:1050F000A2799B558826313B54B9097F02044C178D
+:10510000B1AD4B413CA09E96BC74663FC1FF4E3D85
+:105110009FCAE6DF672CD5F0787D4479AC0D85FA1F
+:105120002408190568EB33B0F7AC19D73D610ABC08
+:105130005D807AAC35BD95B74426BF6D7652FE7260
+:10514000E679D13703C7D56A793B5C10C3E3F179BF
+:10515000A767F0E6B57138FA40C3CF694F386F19C9
+:10516000C50F0FAF3BE1C2BEBC65C83FD53BAD84A8
+:10517000CEA54740F97301B3377FDF30D3DCFBF7AF
+:10518000177FB882E73BB0859FAF5633A88E34D6E1
+:105190008213F5310D6529455A425A64EFE3438C79
+:1051A0009FF89C94A7C8B767F3F735E0277FD4ED45
+:1051B000A8DBA787DD5064CACF4D3690C85F06C311
+:1051C00046379D3BBAFD268B76166F96BCC4EFE33F
+:1051D0009608D19674A29FC3F392F4A5F965CF7394
+:1051E00073AB854C51B3F176169FF4B824E31FC21C
+:1051F000CFBFEB5ED252A89D9BC36018E1EADBF201
+:105200001D3D2EA17D1C8571EF7FBFD53EA422DC04
+:105210006FB5B6F664B14A36935E326D3E8ACB4BBB
+:1052200036E5F7E3F1F82710CF071BD3193E57797E
+:105230004466C78A8E1C90F1D19D1D02C878CECDE0
+:10524000E84867B4F37C7F46573CD56F22E5FFDD25
+:10525000EF2D9F1AC8E8134FBE3932C0EF576C3498
+:10526000BF1F74398ADB291F3A674739D00E7EFB8E
+:105270006A765FE887EE3A46B828108D28217F527B
+:105280002495DBC5D6C4FC5ADBD71237B7E39203AB
+:10529000FCDC5D3281BFDF33AB835D8407A95384BF
+:1052A00010D23F3820968491B5598BCBD66C13C859
+:1052B00071F6489293418EABDF4055225427CDD6EC
+:1052C00070923228CDD0FF80109048AED9F6050CF0
+:1052D000370EDF1586F92279E59D4C1F019EDFEA26
+:1052E0007802F1B499E4FC629C00E9888B1FCCC67B
+:1052F000FEB879A5719F4D12586BCC8B512F472F5B
+:105300008527BF8EA7C13098E129413FE81F2CFFB8
+:105310003C87E738A54D985D3C360EE91B3B2508D8
+:10532000C92CDF64FE734E4961F7F72B353DE9B8B0
+:10533000F30F048782F3BA4A8D7A4B558C7A4B9FD0
+:105340006AD453A6DFA8977EB3BD86FEFE81FF30E8
+:10535000F4E7D40C37D0B90D630CFC57364E34D07B
+:105360001EF53A037FFEEA5906BAB0F51603FFC0F0
+:105370000DF30CFD83430B0DFD576D5B62A087B4ED
+:10538000DF6FE0BFBA6385A17F5878ADA17F44E7A6
+:105390004F0C7449E46706FE5107371BFA47479FD5
+:1053A00031F48F3DFEA281BEB6EB3706FEF1E7F782
+:1053B0001AE809F0A681BFCCF69E819EECFE8B8197
+:1053C0007F4AF6C786FE69F22943FFF4419F1BE836
+:1053D0000ADFD706FEB62B024F1462C89F6D5A77BC
+:1053E00048058ACFF28FC7219E6FCA30FBC2C474B2
+:1053F0009975DB53855A9EA6E1F60BB0DF66F27E07
+:105400007B1C5C47794126E17A06D07DEFB9768135
+:10541000E1BAAFF3D985F9AE396E1FA98A0D0BF049
+:10542000189D3ED56DA033FDD906FE7EB365437F42
+:10543000FFC020437F4E8DCF40E736941AF8AF6C03
+:10544000540CB4479D6AE0CF5FED37D085ADB30D06
+:10545000FC0337040CFD83433586FEABB63518E8F4
+:1054600021ED8D06FEAB3B5443FFB0F06A43FF884D
+:10547000CE56035D12D960E01F753064E81F1DDD54
+:1054800066E81F7BBCDD405FDBD561E01F7F3E6CC3
+:10549000A027C001037F99ED5D033DD9FD6703FFA0
+:1054A00094EC2386FE69F209437FED29841FE5CF42
+:1054B000AF0AECFDD7F4419F19FAA50CCCD3E97ED5
+:1054C0001A927DF41D7E629EAEE76F15BEAF0CEBA7
+:1054D000DC6B6A60DFC57D69E2799DA3C8CBCE37FE
+:1054E000CCDF6D361667F1841AC2AE5A9A283F7522
+:1054F000A902C31DA51A55ECBE3083BD576047A352
+:105500004CDFA1617E83449AC9E3A1FA21259687E5
+:105510000EB838E2BBE7A13945C0F07F5D51C05DF0
+:105520005442F5D80BE5549FDC09EA2A9203CF5781
+:1055300017BD677A3BC9786FA4B7D36CA8BFB8F51D
+:105540000E24B50E187E09BF9D663BCDF8BBE7D58E
+:10555000EE9504DCDF92B8F91FC2BAC98C25646BE2
+:1055600010FD0BFDF4274137A31F096633FAD1A0C4
+:10557000CCDA0DC141ACFD59D0C7FA37064B19FD45
+:1055800078506174283895B59B837EF67C4B7036D5
+:10559000A39F0C0658BB2D58C3DA67820DACFFD908
+:1055A0006023A39F0FAAAC6D0FAE66CF5F0CB6321F
+:1055B0007A477003A37F1D0CB1B623B88DB5BF0920
+:1055C000B6B3FE9DC10E46EF0A86191D0E76327ADD
+:1055D0006F30C2E8FDC1838C7E2318656D67F0389B
+:1055E0006B7F17EC62FD6F05CF33FAB476DF3FB502
+:1055F00088E75FBA5E741A6012C3839ED7CEA4BADE
+:1056000085C0512A9D35D42D09F543A23D4E6AEB44
+:105610004813F1D8A63CE78AA2CDCD71F9FE7F16DA
+:10562000F17BC10792414DC2F8D744C53C42B12934
+:105630000D42CDECFD2ACFBBAB355C4206CFB71790
+:105640006872556BFE5042F81CC4F0F9D6E5D44997
+:105650007A9DDC322030BF08DB85B92695DD13D872
+:10566000434594F73F3520504DB83DD770C71B6C6C
+:105670003DB7AF8816A9B086336FA2FB9F0322BB4C
+:105680002FED6BBD7AEDDF2FF4D9BFEBC4003A8765
+:10569000A67E23B2FBF4B725C76CBA1FB94FD3CB94
+:1056A0007D4526433B34D7DF48727E52D8F0E4DD97
+:1056B000C852B5B8D04579EBF5545AA3DF57822CC0
+:1056C000B1EF6341799D3E99FC01267644DF042ABF
+:1056D0006B3B72024D34FE662C20880E8CB1E6F5D1
+:1056E000B69F44791ED470F16091C9D04ECFF5AF0A
+:1056F00025FD1C2D540CF2A8B9B2F6BD7BD7E324CE
+:10570000D73F5EFBEC98901FD3B77E2FB16A82F62D
+:10571000FDD462417F4FCDF3411BE8F920EBAF5A36
+:10572000CAEF677E887519BDAFFC508B87E71A24D6
+:10573000162FAB84641FE5D3E71A960EA4FD24C68A
+:10574000CD2A1C67C27155C0BF87A8FA3085E10B0E
+:10575000E7037AEF5685993BD57F77E7EAF71E5145
+:105760007B269747A1F7B073765ADBA84E459C3C41
+:10577000CDE2D86851B5609DFCB6295424880C1F31
+:105780001601E5ADCE407CF49217E83858A4FDFB35
+:1057900018FD39E26B3BCD77F6955183D87B935D4D
+:1057A000A365D25FB309ED41F735BF13F9771274E2
+:1057B000C54EDF71B88ADBD877FE944490BD463B76
+:1057C000D8FB903D2234BED04BFC7C5FB3DBDBD9F1
+:1057D000D2D4109BD7F89EEFF71AAE7EAFE1AD6240
+:1057E000EF81DC7B71DE459D12AB776064B4D8DF5E
+:1057F000CBF74DF58D6FF62F88DB477DC711FE5D2A
+:1058000014448BE3BF873AADCDABE349B438026DA6
+:10581000F678F9388E10D7EF911E10D7C728AF9FB2
+:1058200069955D37E1D028AA268C6DE00937FBAE7B
+:105830004EFFBE6E3EF8595B8D70201CFBD5F5AC5B
+:10584000FE5D08EDECF9A2D2DBF388AE87AE49D954
+:1058500054BFAC6E7A3D1BA5BBA175FD64BA7F9E9B
+:10586000159AFB3AB5955B84635477A35F1C25BFFB
+:10587000880A0D2BA924BDE5D9092BE99E77A6C876
+:10588000ED006F723B208E1431ADE7FED00F4ED18C
+:1058900078F40326BFEE07552B387EF47F8FD1EDC9
+:1058A00017A577FD3587DE7D98BBD87721F5BBAC92
+:1058B0006984AF8554798AF179A17E3EF3BCE02EEC
+:1058C000CC0B88EFA4C4ED7FF25012FB772F270595
+:1058D000C4C7F09EB8D7F3CC2F4DFCDEED5E11B7F8
+:1058E0002852BDFC30D3538D2D3494F484E7B33467
+:1058F0009070FD71FBAA6174DF37319447F9AAF407
+:105900008CD5D7EC31C479B89812BBC77B48E2F785
+:105910006A89F2F6C85B4ADFF88AF209AB05547A65
+:105920009F84FECFFDFE3097FF4B5320FB1A91E77B
+:105930002BAC8E1EE067F53F64D97C6B859EEBB780
+:1059400068EB76FE93D7D36A2EB0EF7112E510DCC8
+:105950007CDD4479ACC95C0EFDDCE9290FB7832EF0
+:10596000CF90811E7E2EE6296CDF4DA65416BF3ED9
+:105970001503C5A437FD7E4CAF633B3D9FB0B80E09
+:10598000179A07F0EF7BC37D9DA7A7BBEB676FEC72
+:10599000BCD3EF99605CEFF7827E9B5B22BBCD02AC
+:1059A0001F8BFB83E1435D3F867BC2FF035073AFD8
+:1059B00086E0390000000000000000000000000048
+:1059C0001F8B080000000000000B7BC4CEC0F0A3BA
+:1059D0001E822538106C62711D0B03C30756D2F569
+:1059E000C17025507F0910E703711610A7027102DC
+:1059F000104703711810BF069AFD0C881F02F11D95
+:105A000020BE0EC49780F82C109F40B277191B035C
+:105A1000C35A36D2EDFF83E4E78940763910CF24AC
+:105A2000231C46F1F0C0F23C0C0CDABC08FE3E5ED2
+:105A30005479051E047BB92065766D03EA0700E9F9
+:105A4000CD424A800300000000000000000000007A
+:105A50001F8B080000000000000BD57D0B7854D58B
+:105A6000B5F03E8F79253393C9839040C493970452
+:105A700009382421F2AA1E0842A4D406F42A5AAEF8
+:105A80000EC823869044B02DB7729B21092F411B6D
+:105A9000152D5AB483458B0A36F268D106EEF028EC
+:105AA000C65BB4D1A282D536D45B450B4944116F95
+:105AB000B5BF77ADB5F7C9CC393349406BFF7BC370
+:105AC000C7B7B3CFD967EFB5D75E6BEDF5DA3B76E5
+:105AD000D9C5E42B19FB027FA09CA330C60644CA9B
+:105AE00051775EBB687B09FCFE99DDFFB8166967DC
+:105AF00094173389B1D1F09E653056CAD8954EF8C7
+:105B000015DA95BD70EA0F97A531B69F29CC018FA4
+:105B1000C26A59EAB7A09FFD9F333FBE975F706787
+:105B200075B8F1BB2063E98C5DC1F877E16C2DCBD2
+:105B300057881526E373DD49BF433FB99BEAE0FB75
+:105B4000B39FBAE97B2B1C46C93E9759587CF34555
+:105B50000EF6AB7EDC5120EAD90C066702DE2C1A69
+:105B6000D780F7D0DBEF11BC075480578B33BE13BF
+:105B7000E04F8BC0BF9F5D9BC40A39FC7A6904FE6D
+:105B80000B8587E60F786EACD7BE9997CFD8BA7AD7
+:105B900046E5DA7A2795ABEB7DDFCCB331B6B23E82
+:105BA00083CA46153E01381AB7B0501050EF2E8404
+:105BB000F646FFF03F21CF69AA3BB37CA6BA3D0D64
+:105BC000FA2988D455B766AA37BA2739036E1C1F3D
+:105BD000E6EEC0F19D5402984733001F978A79BAC8
+:105BE000B4E02C06EB91E7B66B2180E352F782E933
+:105BF0006C24B6CB27BCD9055E9764367420BC1FD5
+:105C0000433B06F31DE69EF23EF332F69FD94FF07A
+:105C1000796C606C203C5FFDEF751D12F4B732D3D8
+:105C2000AE35407F4FC0F86B1C5178DCAAFEB9033B
+:105C3000FA74C23FC4E3D08DBC1E9937D4A3E631B9
+:105C40008C45BDCF8EF473A1FDE6379BEBD67EF37A
+:105C5000347D12D2ABD16F3EAB68F0B9FFF7F67B63
+:105C600029E03C3525D2AF314EBFFD023954C0B7D3
+:105C7000F91B59289C1D3B4E9EE62F0FC2FBBC8D85
+:105C80002A0B65F3E769C01779FC57D6E49B94109B
+:105C9000288C8587458F93135997BC34FB1C19E8D2
+:105CA000292FE3FA4512D25573D4FAE63066F0CDC7
+:105CB0008FEA7D4C1FCAD8DDF505546EA9F7E9C8F7
+:105CC0002777FF5D99D55218CB8F7F11F2EA1E1B03
+:105CD00023FA0B3ECE428F4BD85FC5AC39505F3FA5
+:105CE0002ABDE82E8D885C4679E61274BC5ED26EC1
+:105CF000C8C1F6AF280CE5A0951FEEB6E9D3B0BF3A
+:105D0000B5A364A901F19CC7F921CF1676E662BF5D
+:105D1000CD39A382D88FFF55E287BCFC4B3405C632
+:105D20001D9627F861F4834E94873DF35F96AEE7A6
+:105D300015339664A103DF79D2816F42DF74F07569
+:105D4000F1C3D7475FCD7DD2D77AFF7DEF3BE0FD32
+:105D5000963CBBA664C7C295797138A3C21D4B6F30
+:105D6000797982CEFC7DD399B57CB03EC4DE011A30
+:105D7000BABF3E83E8EEDE7A8DCAB5488730EF07BA
+:105D8000B0E958A8231DE2B8D71551BDD77D8BAD1A
+:105D900020BA4C9FD5CC50FEDE8FF4390E875BA91C
+:105DA000EB1360AE79A20E5BA40C7BC0BDF87E1035
+:105DB000D575DCCAEE928CF6CF0675C0778A683F3F
+:105DC00075C5B3C146F8FD7E17AF5FBDA2530F6620
+:105DD000457D1F5CA7EB5991F6500F4F52A3FAC3B4
+:105DE000FE0BA3E13948ED8DFEE6AF38A10701BEF9
+:105DF0007B5DBCBFB52B8EFD53FA5F2B053240B5E2
+:105E000060AB2CFDACEDA9DFAB231E8C7172A45FDF
+:105E1000E8C1E8F7C16774DD1D797FB9746F10DFE1
+:105E20006F64157912AC43E6F48A0C06EB6FAF6829
+:105E30000EE296DB039FC077647E0F12BCAE0CFEB1
+:105E40007EC48ADFEB8D51EB3369C5CB4184D7D05B
+:105E5000731441AFF20B594B8F00BD2A49763FE9CD
+:105E60001BD701D364C278B32A980670C969150C90
+:105E7000E58192A6BE1BCD0706FD019C6309CEC934
+:105E800015B37A8133180DA701477F701B70F44E4C
+:105E9000A77C7C2B3D4DBA66CCEF26C0FE6D6FB75C
+:105EA000F9515D48453C4157ECF35B8336789E3AA7
+:105EB0001370ADD1BACD62B9B1FDA64D1FC4425128
+:105EC000FBF73F7A5DF3B0CEF116885E5FA8CF9501
+:105ED0000644F03856B4B3D29F313F5BCCFCAE35AC
+:105EE000CD8FA9818C0A4FFFF3BBD7E59F55E18E7B
+:105EF0006DF75B49A2F1274D19F36DC6C7630E908C
+:105F00005FC9385E5164BCE469301E76A636C71D91
+:105F10002F65328CE7FCFAF069E547035E7B0CBC29
+:105F2000B79AE05D6B03BE8DB3FE5F37BCE7CB7FF6
+:105F30002E90BFC47F797DF3DF3FBABF64FC153E6E
+:105F4000F94865E12B015F775CE524FDDE9073FF86
+:105F50006C7CA5E2A7B07E77BC547CE24A192B404A
+:105F6000D72322E3D74A1AED57BDD1776FF3810DBE
+:105F7000D6D4CFFFAFF9F486D7AF5B0E9DAF7C6D63
+:105F8000783D81213FAD2C642107F4B1B2ED2AB2F6
+:105F900037571E291BC8A05FDB9AE14C8749256350
+:105FA000FFD0DF4A43CF985CD24FFF5CCF00FB4E5F
+:105FB0006F02A56BB7B782F4A29512A3EFD783DE69
+:105FC00016023DA6E4950DCE3958F7EF70CEC1719B
+:105FD0006D8CF4E992570EF9CA80CE5D23524629A2
+:105FE00040022B5DC6F3A3E5A8E7DE55289E7B782B
+:105FF0007FF0BC02DB2788F6BDC1959007F044AD69
+:106000007FA2BD395011477FD76599F0F390D0BB7F
+:10601000EE46BD0B047262424B00F56A57BA5D7BD7
+:106020004C8AFDEE265912F306BD0DEDEC115332EC
+:1060300051CF3A30E389157684AF90915C77E5854E
+:106040007419EAEE02CEDB0F59F67D37AE21E95D19
+:106050009952994ADF99EA77F7E831D913516FF3EA
+:1060600016F0F7650D574C6C8C7ECFFC1371FF3525
+:10607000DE071A4AE97DA6B3E2D804183F13E468A4
+:1060800023E02B536D96EA685DD3E2EA8F1BE63B73
+:10609000678500860D331ECC9E1F673F81D534F186
+:1060A000E9A079663E7B48E0EF6E81CF4CE4F5D104
+:1060B000820E41BEB978D31EF9E61ACAE55B4241A9
+:1060C000F30AC4F7A079CC8FFAF686194F90DE6AEE
+:1060D0008CE32A30CBB94CD53CAFAF6B3E1B99FE5D
+:1060E0001D7974EFFD5BF96C230BDC8AED33C57E03
+:1060F0009E5010920285FDCFDF3ADFDEE6FD2DC413
+:10610000271FA74E1E103BCE3F0B2F996E18A7E4FA
+:106110001F3F4EC23CB3BC3C5FBCC33E20E88C2951
+:10612000B81F58EDAB84129FC464AAB6A31D4EF2EB
+:106130001BE0F6B0E6F24B80DE522B56DD2E83DDFF
+:10614000EC79EBEAF7D1CE4EED9843F676536151F8
+:10615000DB246897E4F7CD984274CA08CF6BB1335B
+:10616000E2BBAA1513615E8D8CF3DD66F996895C3E
+:106170003FD069BDBF2B70062BAEA950477665395D
+:10618000F1E66167613E6FE90B47ECF7BDCDDF16C5
+:10619000F94EF8FF9690DFB4BFEFD8743BF9118346
+:1061A000F00FEDD2644B3F49BA3DE2676488A7A87F
+:1061B0003ABCFF6D0F5FDFFE4F19CFC7EE736A4029
+:1061C0000AB63CD987F67A12F325AB2867278342B3
+:1061D00000A2D897D61D94B5FED7A589B1F29642F4
+:1061E0004E7733A2F4DC0E99EBC969332767AF848D
+:1061F0007ECF9670BF70AA0FFE17C5CE671DEC6BE1
+:10620000E1283FC7BAC2C7887F1B819E72802F8258
+:106210008532F9B7D7E6EDF045F3B5AC18FE6D2B36
+:106220007D304D2D15FA1FE047C99375D7C8AF4E85
+:106230001FCA97A48FC4E951DFB10B5FAF24E5C239
+:10624000E8E3AB8E67AC6B2C5F71FD246DE63C27F9
+:10625000EA3BAB326626C593B3BDAFEB7DB4AEA8C7
+:106260004F84E2F49FA64871FD39567D9EB1A5A6E4
+:10627000F5520696CEDADCD7BAA599F161F4EB5A5D
+:10628000A668FF85C24BF5915FDC29FA5BABDD1791
+:10629000C4FDF32CEEED800FA5795418F53D96C79B
+:1062A000FC8FF326A487B8343D443A24CADDD208D3
+:1062B0007CF62CD9349E9A9660C2379B05DA761408
+:1062C000FCAE657682C389E3C1388A0F3A94D0FF69
+:1062D000CFC22E2FF548FDE1505FE462FD4E131D45
+:1062E000ACCE2A8ABBDFA9625DD16CE5F47AE7F90E
+:1062F000C917EB78D799E13DEFEFDCAAF66E1CFFEA
+:1063000071EC772A7BD7C01720F1961E7AE7EBB4A1
+:10631000CAC6F64849200F32AE67010DEAF80A36C0
+:10632000EB35588E453A2CF2915EB05552114E62C3
+:10633000690DFF737DBE10955BE84F7606084F8AA6
+:106340005B67D45E3B3F7DFF9CD0AFD3843E6FBC88
+:10635000FFA162A77E5556C1D06E3EF7F6D40CEA77
+:10636000578747A51138ACFD162A811F2A0390ECE8
+:10637000383CF801FA09584701F9B5F305CECE3D8E
+:10638000303389F5C15F0F59F8EB2189C3C92ACE93
+:10639000CFCE380763B6637B359040F1B29305C426
+:1063A00007B962FC27D6CF4DC0F19FD8D8379F1BC5
+:1063B00070FCB4DEC9C2A0A786EA7D541AEF43C2BE
+:1063C000DFBF59D831C6F3738A4C70EC137CFF845D
+:1063D000B32281FCE7076F9C360CF82BE7A8E24755
+:1063E0001D4F5BCB52FA1A3F3B68E637A6CCEE1343
+:1063F000DE656F4D9C71288A1F7FA178D2DE1D0E4D
+:10640000BF5CCE2E47FAEBEFFB73F5FA8C43F95FD6
+:106410001D2F9B85FD79AEF1772B48CF095F49FC95
+:106420009923E448CE3C2E0F72AB594843FEFDFC45
+:106430000B164D1F6099109E32AB558DFC4D4C775D
+:10644000CF81F743C5DB4C65BA8C5BF850D4BF50A5
+:106450008E6CE2FE73C3CF0FEB7E17CAB9CDAF29A6
+:10646000640BE7556A0DB8DE39EBCDFEFDC12CCAD1
+:10647000EF8EFE7AA1D7655AFCF85F751D3A701D44
+:1064800012FFF9EB105219D19D51D72456116FFF0D
+:10649000FB44D0A9B6E210B743C0F87B272A1E01FF
+:1064A000EB99829BC04F83F74D44BB35B886F9F317
+:1064B000E3C84B9B9A48746F637A7828FA0FE65CBE
+:1064C000DFB117E5D50466925F71E4864DC5EFD262
+:1064D000B8DC080567F2F27385E265F9EB5908E369
+:1064E0005B9337D4ED47BF5E6635B79B33D7042542
+:1064F0003BD473EA981F87C9AD64BCFD6C16D27992
+:10650000BCE66806D0CD104137430C7A5966A69791
+:10651000C17596B8D01A737D20D2057C37D0422F32
+:10652000D67E723446F1B8BCF5328F17CD32C77DB6
+:10653000F259F7FB3F0778F30FB9FD61161B6FB2F5
+:10654000F6AFB24001E265F70FDDFF590013FCD949
+:10655000FA49A98817902749244F2AE2DB3D31F4F4
+:106560006AE81BBDB48FC84FDEAEB7F7ABF2D39766
+:10657000CE0538D67A7446E307B349AE2B225E794E
+:1065800030F37A6707FA6DDC4524DFF7631DFD3CC5
+:1065900019970C8C96F78AF02319F546E147B28ECD
+:1065A0003755E57AF07B4C9F8A7818E50864605C83
+:1065B000CF9691BE730E8C67F381BE15E7BBB16AAF
+:1065C000029FAFA6FE2D1AFFB071FB481E32BE1F00
+:1065D0003377CA79E1A3440DDCA442199C04660414
+:1065E000D27F0E0B35E2FAD635F3FD2DD2EE16D161
+:1065F0002E8879053DED02D06E84A9DD3C9C0FB458
+:10660000D34DED2A62DADD26FA63A671F598716B37
+:10661000447FA4CFF5B4F3C7F4B754B4233DB0A777
+:106620009D16D3DF3231AE6E6AE78B69F7EF067CD9
+:10663000A6719979DC9EF7A576E33DF9630FE44FE7
+:10664000217A39943FA57C2E8CB3F4451B97115BBE
+:10665000793E874157FB45BB26A4AB42CC5B6163C7
+:10666000AA294F85E7AD34BA673A0351CF7BE8CA10
+:106670003DD317FFF95C537B758D8BE9C5F49CDA2C
+:1066800037FD5D11F1AA1F4C427FEBEA3459F8DB6C
+:10669000AE69D05590630354537D4D86786FBBA689
+:1066A000810262223E02B2F29B8551FCDD33FE3F45
+:1066B0000B7EE13F8EC03FDB02FF6C33FCA2EECCD1
+:1066C000E4EFD595B327E17C0CFFF2D9A6E50D41A7
+:1066D000F7FFE6F95559E65765995F95697EF69596
+:1066E00055938279FF97E6B7CC32BF6596F92D3383
+:1066F000CDCFB972D905AD9FB5DDDDB66692B76B6A
+:10670000F35F27FD7FAD88E326ACD41B56E07BE02A
+:10671000ED76EA4F23F93E8AE99FA33CE8EFBB47B9
+:10672000548DE482D323935C60F9F6507E36876BF8
+:1067300026C885E7541F97DF02CED72CF50F2D759D
+:10674000F8E56FB86FFA9861475AE47C3FFBDACA04
+:106750004CBE9FACF2F8E5E87D4D15B83938A094F1
+:10676000E44FA38FCB9FFD03843C4A837D8DFC4483
+:106770001924AF6C425EDD57CFF3D89A457E506343
+:106780005A11E1A759D80B2C9465DA370F4C9CD2DB
+:10679000867EAB334779DEE23A1BD7C756D6339DA8
+:1067A000E8ABDE49F945FBA0DF003468057D0FCB7F
+:1067B000E741DFC3724F7D0695BFACD7A8DC01E38C
+:1067C00062F94CBD9F0560FC6DF563A8FC31EA8B56
+:1067D000503E20F4C52BD264F2576CAE872D339F08
+:1067E000F4482A1FA9F78D5561BC9FD46750FD233B
+:1067F00069E6581BD9AD1D8D4900E7EE57F3285FB8
+:1068000069429A4AFB2F53C34A5249E4B981D78F50
+:10681000A44957E077E33264DECE196AF4C66F57B5
+:1068200086EDC664A8040F7307156F5ADC76E5364B
+:10683000C04BA95BF4E70B347AE2F7F72D6C57E411
+:1068400016FDA5698DEEF8FDCDC47147FA381E58C6
+:1068500046474362FC763760BB429F986F56584E5E
+:106860008C3FEE6C1C3725A53980F1AD2B6733D2F8
+:10687000476D69DA66292A3E141A50C164A0F39460
+:10688000D4E63A6CF78D809FE5C0F89AD7CF64A024
+:10689000679B1BDE17624E138F478DBF0EDEA33E34
+:1068A0008CEF4744BDC7EFA11C3B4B7C9F647EDF50
+:1068B000A397AF613D793C98BC646B32D79365CEAA
+:1068C0009FCB571E98847C9F6CE7EF7F8A75D4B767
+:1068D0009633431EF1F609FCFD8F8CF65EFEFE1723
+:1068E000A27D4A0A9FB76B8A338471B147BE7B4948
+:1068F000E6DCC2C87C2FFA5EC1B0B951F37BE47B01
+:10690000E332E7BA23F3B9E8FB1386CDEDC3EE49D2
+:106910002D977B7264516E25371792FC1CE5A820D9
+:10692000B9336A60A98EFCACACE770FD87EDAE862A
+:10693000863C822B88F2C680EB278BCD700DAE3162
+:10694000C3F5931A335C836BFB866B9D8DCBB5DEF1
+:10695000E083F1F5E8F11FFD37F3F8437E601EFF99
+:10696000D11F98C71F72E7571E3F1CBD2E9B6E3765
+:106970008F9FB5C43CFEA625E6F1B3967EB5F1FF28
+:1069800051FA78922D70C426F45D255AEFAC0B981D
+:10699000F45368F78A681754A2F5D840C0A49F4200
+:1069A000BBD76D42DF35B5AB8869F707D11F338D93
+:1069B000ABC78CDB21FA0BCBD1FDF963FAFB8B68FB
+:1069C0001794A3FBD362FAFBC080CFD4CE17D3AE0B
+:1069D0004BB463A67199795CF82950A19FEFB30479
+:1069E0003FFA47964D5E4371AF812C20A1BFCF97F0
+:1069F000CA461D82EF592ECFBF4F9EB2EC62B43B08
+:106A0000D7249BFD5CE9766E9FD9EC0A95BE44566F
+:106A100047F900CE60E68CA87C8B6A3BDFCF7ADE3C
+:106A2000BB8399D746BD1F28BE5F23E2D469F6D247
+:106A300046942BBEC1D03E8EBF22538C6BBC67697F
+:106A4000FE761DE0DDF8AF3347A3BF2832AE8DB729
+:106A5000BB588C9B151FAE35D97CDC45386E213E6A
+:106A600037F48B6026E1D7C74BE3F9839EEF49FFEC
+:106A70000578593DD9292B49F07E3DF76F1A7EF6EE
+:106A8000647B9D13F3761B2F92D963D82EAB6F3F97
+:106A90004E53BDD9DFA9FA2A74B4F70655FA8A1401
+:106AA000D6FB770F97CBE5F1E20DA3C5BC9A2A2759
+:106AB00035E7C1F8EC90D96F0B84CDA2F3610A954C
+:106AC000C0687B3CBF6D538129AF3E7950DF7EDBD0
+:106AD00046A15FF4CC033A8AB77E370AF8D8C602DB
+:106AE000939E959C3293F4ABE486AB9DBE38DFADAC
+:106AF000B5F4EF6233756C9798D6CC64EE5C34E9EC
+:106B0000614DBEC7F83E94093209E33F693BC2C8F4
+:106B10003F674BF8790A3523149428CEC1E7896A78
+:106B200025FE24AAE1A00CED076D54593895B1FB60
+:106B3000E5C08D881F575E33F9C7549F2E219ECE26
+:106B4000D94257D379025017E3E57FCCB3733FF0B6
+:106B5000C3DACCDF65C759C7DBEC9A492F1DF4A90E
+:106B60009D858B7B6F1F69C7E1EAA1D30CA04FE421
+:106B70006F8DD3E9ED8ABED84EFA5A968FFC8E8679
+:106B80007C35F85FC4B7E78E61E247BBE10F308F19
+:106B9000DBDA6C3CBFEF73681D15F7B94DF8BFE643
+:106BA0008A78F73C56E1C597A7995C8E7C759ABDAB
+:106BB000EA2D8E5AAFB5763B1F678D8DFC5B463C48
+:106BC000777EB3CDE4EF5AB8D15C5FC066A6A35C14
+:106BD0005AB0C1C6F07CC76D167FD8BFE17C615E3C
+:106BE0000B59DD2AD4D38DFCA0B93EA662FEF7E294
+:106BF0005F3D528A7943CD769EAFF301D08B16C5A7
+:106C00005755EE901DEDF97776155F3F9EE1F7A1A0
+:106C10005583509E26B3B8E78C6E5D6386AF3FF810
+:106C2000ADF032D640F0F60687BA558AEBBF7AD47B
+:106C30002E99E244CB9CDE910CE4CC39172F7BFCDF
+:106C4000297F74917CDF27E80836C0CBB89CAFBBA6
+:106C50001CCBFEBE3BD8CB778B9D1D76E48F5AB5FF
+:106C6000AE5C92237126872DA00F86EF6C7B268663
+:106C7000073353BB35E7D9AE4DCA39AF76E5721F3E
+:106C8000FD750A79F9C2B69FD9D1BF78FAA913D791
+:106C9000201F2EFAB5C29CD0AE739B8785715F50C2
+:106CA0004376942755BB94B871598AFCC3FC17FDF1
+:106CB000C24372A26A8723341DBEAFFAE53B231993
+:106CC000E0A1B3A1FBF060DC479F92787C34D8311F
+:106CD00012F7AD2A95DD122F4FEC84A0BB53CF25C0
+:106CE000CEC27595B6EEBF99FA6DB9C1E688920F1E
+:106CF000C7C4BE04EDB87FED4929941F477E18F143
+:106D0000AC534F4A1CBE3DB6900BE1DBBAD91E0016
+:106D1000386AB77E487454F68BED5EC443ED1EC5E9
+:106D2000E4F7ADDDAA841D23A93C8125C65124E0EA
+:106D3000EB1AC6E563CDAEC5E40FAF6959F7A1E222
+:106D4000C5EFCDF40C78F18711AF6F28FEE958DF5D
+:106D5000F973AF06A8FAA0FD712FE215FA9D634FF3
+:106D6000C278AED98F8DFD7F9A12DB1F63DD76A4CA
+:106D7000AFDA96B57C3C0BBF7C80BF64C6C64F9C27
+:106D80000E4B1C6B6BEA79E9898BB69F7D3408E367
+:106D90009DDAF1D74783B87FFFBF8F1EBD13F59AE9
+:106DA0007D2E1FF27BED53AF7959D43E98E3E07C02
+:106DB000D7F9E4CF9F7818F8A4F3B8838EEE75EE78
+:106DC0007D6F8806F3ED7CF6BFD335687FC7DEABF9
+:106DD000C8EEBF6377D9C0BEF643A4D350F43917C9
+:106DE00091C7A4ED9150D902435E94967539B84B82
+:106DF000612E80F3F4314708F39A6BE1D9B2225C3B
+:106E0000A7C5247FB1BE1CF05BB36DF587CAC878F7
+:106E1000780E0E9631C79E01BB64E03A5FFBED6FC2
+:106E2000946069A338492DEB26F969FDAEF628ACCC
+:106E3000E765BDAFDF59F6B91D8378B5DBD6F271D2
+:106E40002DEB771A7F191BBB7EBA65FDCEB2EA9F88
+:106E50003E8C2F77A5C68DE71AF1AFC5BBFFA54FB6
+:106E6000BDC99003FDE1B752E270791C7A8503F940
+:106E700069C7D34F3C9CC6D7773A20A473FBD9216E
+:106E80000CE8E3A4ADFB66948FDD7B1D3EDCCFAB4D
+:106E9000F6BE41FCD5B9FB15BB46F291B925D0131E
+:106EA0003A59CF4F3BEA0D3512AFD46EF1841DDE57
+:106EB000C83AD58466946B5E7A7E829E8738DDD729
+:106EC00084F65F27C559B7D58E1C2E8F433C696F5A
+:106ED000F1963FD899DBBC9ED2185CC71353F0796A
+:106EE0006FEB68CCDF87F3BF3C6A3DB7707EED8DFA
+:106EF0002F3B373B54CC4730D6B7D3C6F5FDDA909D
+:106F0000F4068BC3AFC6FE76A1F1D00687251E2AF4
+:106F1000E6DB1F3FF73F8F0BC3D3124CAA1C1D8B20
+:106F2000AF539FC797EF8F382401475DF9A0DCD896
+:106F3000FD496515C1C1D911784F8973B3A79E5218
+:106F4000424178BEAAE520C969AB5CA8E9454F7EFD
+:106F5000C6186FCFFE9128BF4E1D788EE8B066DB55
+:106F6000093BDA4787B7EEB4771446E81EE57F742D
+:106F70005EE4A967F68F24398DFDC7599F5F0B79B1
+:106F800057DB6AEEBF76DB87A6FE17055BECE417DE
+:106F9000ED679C0F54FD069CEF07ED368679F71FD1
+:106FA000B428E5F1F49B90C366CA835AE5293D866F
+:106FB0007E4525C5AEA1BC6B5AA1BF11A4738F3607
+:106FC0007EEE51D58F39802F1B93ED1ADAAB4D9E93
+:106FD000EB991625B79B2DF8F4A5F926625CCD3701
+:106FE000B9A224DA7E32E04FD66513FC7778CA075F
+:106FF000E27909B4C3344C3250FDE45756BC53CA4D
+:10700000713E8A4FF6B9E2EECFBC3FF4B721FDDB0B
+:107010007C32D3A2E86B54D9F5C3D1D5A632CD9436
+:10702000BF7AEF641EC735E67FEF456C1303B97B6B
+:10703000AFD4DD86F9ECC1AB795E201376BA17EDDB
+:10704000F4EC587D8EE9BA86F287C40F6FCF7423B3
+:107050007F147EBE0FE0C898BF23FB4999FFBEA2F4
+:10706000533E8F1DC7CD45FB2944CF135998EA8A5B
+:1070700093CB1F0FABA3E749ACA319CF30BDEDA84D
+:10708000F8D401CFEF2B4F9138DC61CAD74816E313
+:10709000C88959997DF13F9BAC9E8AF6FB38D8266A
+:1070A000B24BD0EDF8456A040F463E9CD1EFBDAE21
+:1070B0000912EE3738BFC178AE479C9FF7F5CC5721
+:1070C000A7FA00A36E19075BFA4AC5164BAC1890D5
+:1070D00054056F0D68263FC720D64265166BA73250
+:1070E000C5E9935482EF2DF24BC9ECCFEC8B440BE6
+:1070F0007CE7A18F9F93F5E301281B6DE2F9DB9EEE
+:10710000D0E350DF90CC4CE783739D9CBF2F77CAB0
+:10711000865F26106D7735B26A9ABB2B8D1F63315F
+:10712000BEBBDE1918EE8CA227C5DDCEF3BE84FDF2
+:107130006BD8EB5729CB29FEBE3A83DBD5BDADCF4B
+:10714000CAFA0A935D6D2D9B0738E76C66043FF71A
+:1071500053494E7E7E59679A2F9AFE605C67697428
+:107160003EA3AE937D2FDEDB607AF8D28178546245
+:10717000E96F06D2DF68A4BF0ED14937F9296E57EF
+:107180000257E37C33F2EA24FE3C2071BF97AEE065
+:107190007CD345FF72627566A08F79B259401F514A
+:1071A000792D1B84FDA8AA4C4D284278368975B7E5
+:1071B000D2A5393FD5D0D7DCA2E6107972BF2979A4
+:1071C00095CEA3A8696ECA4F719734DD8EE77C55C2
+:1071D00056E743F9E936F24FFC3C9FD0B08B5D0592
+:1071E000E63C4E87256FD526ECEF983C6EB1EFDE7E
+:1071F000830FE2E8C3D67DF77667FC3C2436267E13
+:10720000BEA0A1879D2FDD5BEDC86A67FB611ADC1C
+:10721000A7539EA52AFC0D13AFF3911FBC6B9BC413
+:10722000CFAD59E8A86B47D2489487C8BF78CF45FF
+:10723000A2782E6DDBBF1FF5A6262FD3935348CE21
+:10724000694A2E9E971AE594A05CBCEBC3977F8D8C
+:10725000FEF55685E1D6DCE536E2937A322E5622EB
+:107260005B6F5ADF0B9D4F6C5C91F3DB129FC16F1C
+:107270006EFAFECC3689CE4F296CF88FF1FC436D47
+:107280009B8D85E0FD19C6FB3FB389EB030B5F8443
+:1072900051F03CA8181FF7A5E8FD23B53C8169D142
+:1072A000793C41BD1DCFFFCF13F8185091627AFF92
+:1072B000D7B9E56DE49F09F07B0006CE1A64EA6F4A
+:1072C00091B27C2825E1093F8606FF90FE8CF99F4C
+:1072D000930376BE4F542485499F01FB17ED86909A
+:1072E00044F94A567F47CD1E89F6A7DB607FC2F37B
+:1072F00038B7852CF6A3258FCEC0B7952E0F3985CC
+:107300007DE066EE5EF0EA0F97507C94F86AC98BD8
+:107310003C2F6CC976294479CC1D439318E159213F
+:10732000BFD17BACEE41D83922F46BC19B23C38C17
+:10733000679766C673628119AF1EBF198F563C27C7
+:107340008DC931B55FA454DB89C8049E0BE01FE2F0
+:1073500019E420CDA306E611D662F159D97AEF2AB5
+:10736000F46FF48B470BFE4E59F07796B5EEE76F4E
+:107370005985339D589BE69DA986897FACFC66E0C4
+:1073800029CBD73E919EF93DE42FCE109D48F3F8CE
+:1073900077839C2D9C798AFCC46F467E7062CF7E79
+:1073A000F90EFB02CAA5330E9D98CB62F96B1396BA
+:1073B000C0D72DF54EDFBC7C8C4F33DF3C1BC6ABFA
+:1073C0007D54C6D947A97FA047DA0FEEC1B8641A29
+:1073D000F2B54AF12B5CAAE9504F6CB5F9D06F7940
+:1073E0004F51F735A8B7D7CEE7798E372770FFEB27
+:1073F0009204BEBFDA12785EF35D1532D3D1BE6F50
+:10740000554212FA8B7CFA8B57A2DED56AD3685F9D
+:10741000F375BFFC1D7A5FECC3F86EA6DC3C0AE195
+:1074200080F6E46FEF6A7DC77B6B94BED3B9E7FE4D
+:1074300061B8EF3C24B3CA787A7CBE8BC3D159F0D3
+:10744000E77424C7C5CE6EB2A35777D455E0BC0C01
+:107450003BC2BE8BFBB76AF6CC207DF2D0027E1E0B
+:1074600073F7297E1E738A32FB9B23A03EF6359567
+:10747000CB4DA64F9F93CE5328701D3760BE24F28C
+:10748000C17FC9A106C24FF3EF314ED5F81795A1C0
+:10749000FE5852B780F69F5F7BA7B46159AAB71414
+:1074A000235F4F6E4D9E88E7646ADFE27995A3DB28
+:1074B000CDFE1CA6541F443FD8D9637C5BBEFC980C
+:1074C0006AB5BB14DC8FC776989F8FEF876ECB5C55
+:1074D000623FF2B2F40BC98BFD91AC4F73917F9474
+:1074E0009FE3F2ABF1EDA74713B87D037891504EBF
+:1074F0007575337F03E0A96BDE209A6FD7C7FC6AEE
+:10750000A6AECF95F278F6D12D2E4E2F0FD979DC7D
+:10751000F6A105EED00A98C781055517A35DF4C9F9
+:10752000BF052E8E17A788D8072C49A63D4F4F625E
+:1075300063902F9AF8F932D69C19EFFCBCC10F0664
+:107540007F187C91B9202110CF7FF98E8BCF6FD21D
+:107550008202CA83EDDC27518CA7B301E0EA038FD6
+:1075600041D63018E1A9DDF311F9179CADF1FDD03A
+:10757000F5784803E9B621B8623CE0EB7BC0D44122
+:10758000E4077B7376BCFE836C03F99B16B834E288
+:10759000B74E27B7A399DA9C39D3837C5276F52A64
+:1075A00080F361E03F24F9876C7E823BB89831F22A
+:1075B000AFAA9CFFB3AE619BEF8AB2B7D6BA263EA4
+:1075C000E082FE1E70F178476AC02F21DCFEBF9F6B
+:1075D000F362FF5D9F3A68FD06093F8FF15D8BC046
+:1075E0004F5982FE23FC9E55A69130F407BCBE790C
+:1075F000B0FF5FB607F01D27BFCBD077520220FB4C
+:10760000009E14B74CE756D0DE427BA296193F414C
+:10761000523E0DFEC34366783ECB90B752AB14F694
+:1076200080DC2C71BAC3E84F49A98479633C8A395C
+:10763000797FED667D14252FCA5D94013C599EDB50
+:107640003B861C36E477533297834DF7AAA146094F
+:10765000D3DF3B5CE83FCED6B549985A95A26A94F1
+:10766000E7705125F3075148E63E92DCA3F78C679B
+:10767000ECD9BF2B71FD1B275DDC1E294B08FC0AD2
+:10768000F135B2ADFB00AA4F7E174BC5F59E22F433
+:107690009BB1A7B93C32F2FA6B85BD619547CF012A
+:1076A0009DA3C018FB0DBEEF8D3DEDF623FDF4C884
+:1076B000A10553681F2D6A2D3E88F939456F717EEB
+:1076C0006442FE80F54678296D0B2A880FABDCE911
+:1076D0004FDE18F2C4BACEA05CF7D4B30029C56D52
+:1076E000C06751FBB7554E1D7389FD55C8A9B36CD2
+:1076F000C2C0ABB4083D152DF31F7444D18F21A730
+:1077000022F414223AB48E2331674FDD978BF2E5D1
+:1077100088827E90AE893C3EB942F051F2C7A1AB5F
+:1077200071FE1B5AA7BA90EE77B4953991AD966465
+:10773000F0735EEAFEEB824C904F745CD7C69C1AE5
+:107740009E291F0F2B8FF8507C508F9AD79966492E
+:107750009C73D492AE8B733F82512EC9E0E7B8760A
+:10776000B4E524713B334CEBDE43F7C20F61F08587
+:1077700041EF56FA36F8A19171BF84A13F28528B90
+:10778000B00BCD7E8146C3CF1174519CF80EA10F72
+:1077900036BA2F5937017E6D0A4FF2615CE20E4F07
+:1077A0000EE533DF3180E3CD8A07A3ACFD14F4C3CB
+:1077B000A8BCF35AB59BFC5AB59FDA4DCF0DBCF669
+:1077C000860F03AFE310AFD297C7EBA7B8BEA36392
+:1077D000F1FB65E79DB5644CDCF372FF57E63D9E17
+:1077E000057EDD4176173FB761D097212F4A976E0E
+:1077F000CC24E26837DFEB65C891317BEA0EA28AC0
+:1078000068951397B5B26B114F63C32AC3A32EFDBE
+:10781000C98D8FF1974C3A7F716302F0DFA817662C
+:107820002DDA068F466A2C753A0035B25D2539C6C9
+:10783000DACF2F0ED512FE381DFD8B865E1A8357C8
+:10784000A1971AFB8B11075A9710A8C4F1A53DC048
+:10785000375ECC3FE5F6EE5A57605102B44F0498BC
+:107860001330D7AE209CCDED53335FF6C687891613
+:107870003E6B01BCD03904D8E7F2A558388CF1F33F
+:107880001292399C406DA8BF6495323E580DBFCF0F
+:107890002E6B240BE03E8CC736719E6B85FE759770
+:1078A000A55CEBAA68C079D9541674147D79B80D1B
+:1078B000BFE0BA043D88F87096EB348FC13EE647CE
+:1078C000BD7EB0DA22F9018E946A4DEA71D618FBBA
+:1078D000379EFB99AE4D44BA189CC7E83CEC60D487
+:1078E00083E2ACCFA6041EAF5DECEC388C21F3DA5A
+:1078F000E975E5DE3EE2D3917B06FCC24F65CEC35F
+:10790000E8DAFBC64518977CFBDF3FF260DCE94F05
+:107910006AB707E13CB9FCF71EBCBFE5EDE5DCCE7C
+:10792000B8D9A2CFEC14F84B4EAC780AF1774BFDE6
+:10793000DF4BA3F99D2DE37194DB420A1A9D3DF4C0
+:10794000BD686B22F9E68CFAE2965453DDA0D3C5EC
+:107950000E9E27659DFFFBC28EBA6DDB66FB600D38
+:10796000C70FB422BE4F0A7DEDE42E0FF9330C7819
+:10797000E66E1B65473CFCA9D521E2F0ED368E7F13
+:107980007D3AC6CF026229AC701EDE9748FDCD7FDE
+:107990004021FD620E8CB50CE83BD07A1BD9D9D6BC
+:1079A00079CC7F5B9B3210D66FFE5A89F4526CBF44
+:1079B0001CE821B06C35C5D9ACF39C13B4C6339721
+:1079C000939D6ECDF398C7B47513B2E3E47BB4F224
+:1079D00038F9C27EEC9A3F26087DA1945D8EF9E8C5
+:1079E0006759E18F0AB5FEED9A93F58C92B43EA8E3
+:1079F000775279AADE47E553091A8F67EFD97F9846
+:107A0000E84B6D2F457EDFD1F64EE24D5A446E5F56
+:107A1000B1F9A3833F817A31E3FE1BC33F3E5BE0B4
+:107A2000FB4A21BF170A7DA0F8D3BEE5F76C9CEF97
+:107A3000C858780DB93D1BEF958DC28321C7ADF8AD
+:107A400038D3969B887421255AE3C05F0D2FBD7DE6
+:107A5000B758899F3768F0CF53C21F306FCB8C5512
+:107A60008360FCC6BDEF0DE1F702B3A3281F0CFA3B
+:107A7000B4D21F637576E4E71E3A6BBD9BF063D00A
+:107A800005F05186883F66A0DD67A5B7FEF2893A0A
+:107A90006D1D43500E58E9AB536271EF154D4DE427
+:107AA000FEF2799A3E05ED50D85E56F1381D973FAB
+:107AB00027D5E6C377227F6EE1FCB1F857DB7F89DB
+:107AC00072A7EA170F7851EEBCAF36A7E378D58FCF
+:107AD000AFF4629CFBA41AF4E2F7EF8794B87985BF
+:107AE0000B1325E10F37E72BB035C16B906F3F7952
+:107AF000DCE6433F43ED56078F83EFE278833A8F0E
+:107B00007FEF8A9FAF50F5F307D2359EC76ACE5BF1
+:107B1000D862A3FC13F497E130BDC5717BE2C22D9E
+:107B20007DC7B76B77AD8B9B7762E40758E9F606A4
+:107B30000BBD025EC88E09023CE4161771EBC62726
+:107B40007F3CF204C0756ACB6FBD5261B4DF9CC745
+:107B5000C7CFB4DCFA530CF1F446AF9D82BE237A52
+:107B600043286E1E43B52DEC453BBC7AB38DECBA71
+:107B7000EAED0A73623ECB7107EDDB8BB6FFE6F5EB
+:107B80007100DFA2676D69D3F934285FC158A79EE1
+:107B90003C12B12E553B7FC3E3BD9AC82711EBB30E
+:107BA000E8D9FD76CC8BB1E2B1AC65BFBDC3928F95
+:107BB00040EBD472620A9DCB7BF29C1DF7D3F7F7A2
+:107BC0004974BFB2F5FBCACDBFF1A27C403C515C09
+:107BD0005EAC57EFF942E16B9E2FA176E487EB6D27
+:107BE000FDC6E0DE3A9AE8FB99E761FCCA371D94CE
+:107BF000AF54F9CC52CAEF794FADE374FEC8CA74E2
+:107C0000DC5F2B6DC1741F95FC79E5A3DF25FA5B62
+:107C1000F8CA77D3F9791E3D93FB6D829938BFF985
+:107C20009BFE85E6B7800588FE2A1F512AD05F7229
+:107C30005665E5CFC6E1933F093E79EF310706511E
+:107C4000D97BC26F197C5511F7FE5AE349FCBE95EA
+:107C5000B3C28EDE95281BF71439A3EDAADA2DAB3B
+:107C6000DB717D3EB8481FE8A3B8BE1A14F89248ED
+:107C70001F7FE5AA81428ED13D31869E5386CFB1CA
+:107C80007DBB8DEE8B89FACE74DFCB1D627C803B91
+:107C900041BA0CCAF4F8FE4C8F5B32E0E3F92F06D0
+:107CA0007DF5C6F75B783EC9C747B95CC1BC187A99
+:107CB000DF6E0B0F34E5C3384CF78944F23D6C821C
+:107CC000AFCDEF014ECA57E9C1EF3E89E2AC0B36AA
+:107CD00038CC79703D7463BDE7C69CBFB2D0A26F4B
+:107CE00019A5552EBC69910B6CD3F9E5AF54DB4255
+:107CF0009477547DDC41F643F5765B05E2E3AFDB38
+:107D00000EBE7E13D0F95F5B0CBE35CB572BDF5612
+:107D1000EE18CDE2F1ED5FDD7E16976FE1795CBE86
+:107D20007547E2111AFBFAE4EBC25EE4ABE28ED1D6
+:107D30000792302FF783A7165D4C7E060B5E0DB9B8
+:107D40006A95978F246AFCFE8298BC3ABE9F47F2E0
+:107D50001D39FE0C7AAC7A7A318DD343B7065D1AA1
+:107D600074DB4B9E96158FD6F72FA23C1A10EBCFE3
+:107D7000084E620578AF5EA39D15A0FF392827F84D
+:107D80001FCF8E93D7C1EA86A29ED1E8CE8E9B9F4D
+:107D9000EB77FBD08CC573654ABC78B7BF4C8EAB14
+:107DA000C797B8B95CD98BB40065B59BE3AD49C43E
+:107DB00057C012A4BC7FF429123F257B899F6CF029
+:107DC0009CD1B94A3F9DDBF627CA1F69A08255B8EE
+:107DD000B5292AFA538BE5A5B9505FE82EE6F5F1EF
+:107DE000F2CE1CA8DFE62EE1F5CBE4621B90E61391
+:107DF0006CF494C950AF31E6392FC9E4DF50E51374
+:107E00000F62DC457D9EDF17B70EF8DA591489F74B
+:107E1000263A58D05584F7344209F555D9BF5F85C5
+:107E200046E00647E01A37C9A3491AE2F594CF495C
+:107E3000F932773C7715E56756BBB9DF78F8CEF1B4
+:107E400074FFEED730FECDEE01BD8FDF64E3FD9C05
+:107E5000DA31BC0CF13AFC62467E0803FF45AA46C3
+:107E6000CF5D2D78F494F83F03CF7F3426DBA99FB4
+:107E7000EA9EF53ABFB251E43528899C0E9424B9A4
+:107E8000EE5928978AF5BF43E0037FD05EEEDA3BD8
+:107E9000F0317EDF53F7105C5F4539F347D41BBBED
+:107EA000FF35D18FE757DE4CE0F8BA2169BDED52BE
+:107EB000A81739872C45A27E53DAF65D2CBFED0951
+:107EC000FC90E39F85B1BF9B6E56787FEE3A0FDE44
+:107ED0009F26E95C8F96806866031E1A75A6D97383
+:107EE0009145CDF9168A52D41DA6713DA671591639
+:107EF000EC83B04E378CE5EB0438A57DF18D31BCB9
+:107F00003E2B94D3D8A1111CF7201CA31CA18BD00D
+:107F1000FEB909D4224ED766FBDB88D3D7FE4526AF
+:107F20003BB356D21ADD50DFF91623B9DC99E015C0
+:107F3000F907FCDE19C32F31F6A5B965B864257BB6
+:107F400016F13C0EE18732E2E86759AB829389F182
+:107F5000535BE4E178B69EE4647FF1B19FBB457C5E
+:107F60006C101B7481F1B167DCE7111FBBC86DE8B1
+:107F7000F322DE2EF6FF334772285F485531278FF4
+:107F800031BBA6508A88F1DD2E8BFC35E878C451D0
+:107F9000DFAD88971147D92DDC5EEA253FE224A3A7
+:107FA000BCE6511D05941F61B3E6471C9329E1A966
+:107FB000F4C5620DF1D924E2C6171AB737E2FEC53F
+:107FC000FC514C1CFF796F39C5418B7DF1E3F8E31F
+:107FD00094D914776047F8FA19717CA6142A08E737
+:107FE000D930D86008E751F3DF01B93C2DA8505AC9
+:107FF000CD5BE6E7E32C74605DEFBF58D7FB7CF305
+:1080000020DEE7F7AA8D6223290FC226F2207EC95F
+:1080100002F747E7411878EC2FCFC49A5762CD2377
+:10802000C90C98F134B8F252D3FB8BEA8A4CF58B29
+:10803000978D33B5CF868D30BA9EBB669AA97D7E6B
+:10804000F34C537DE8C69B4CED8785E69ADE0FDF47
+:108050005AD5E7BA8F6859627AAFC8A162BC0FD20D
+:1080600058F7CBF6FC202E5D18EB6EE46961BA116F
+:10807000E27734ACFBC3D9E43F2A93B4D8F5F78751
+:1080800083B42F5FE8FAE77B843E7481FC3E0A8963
+:108090000DE3443AD713BB6CEE35A81727036C28C1
+:1080A0006FADFA4572EB0BFF2D79E3E55B682B9022
+:1080B0008EBEAFE86371BF1F20F2239B64719E7474
+:1080C0009293F4817B64F996E87BE4AFF0703972A7
+:1080D0008587FB557E02FB26EE9383135990F64F5E
+:1080E00071BE9CA1430AE6EB4D65E2FCF963AB2649
+:1080F0004FC078664781968C2205EADF88C8FD9BD1
+:108100001C5A23C60346295C8E837C9FE6198DFB8F
+:10811000CE721BD77F8236C4F360270B7A8B68DF61
+:10812000A3B866324B939614A2E9D5B3BF685F003B
+:10813000311CAC1A9E8476D0CB383406699D09B4C4
+:10814000FFDF68C8BDCA6124F7CEB87BEEB5A0F3E7
+:108150008E67E6E5D2F3E33703D701FF1CB79BED4B
+:10816000A2FEFC53959BEFF7A0FFFF780133E519C2
+:10817000547BB81D55ED5178BC3CF49774444BD7F3
+:10818000FCCF2E41A06BA5F65528A2576FBCBD822F
+:10819000F27677CD08A2FFCFF03B1BFDD4B64E643C
+:1081A0003DF707433F37BCC1FD5F377C66F6E7DE2E
+:1081B000E9E179D7778AF1AE87C20778BB1EEFF481
+:1081C000C6F2850953901FE0795882FAB7DB40F573
+:1081D00003BA9F11C8B6213CBF67FED7764B98AF54
+:1081E000ADD1F7D7B10A1BC2F5FACD8B3DD8AEA7FA
+:1081F0003FA39FC178A613F6E9E4A02D1DE8A7FBD5
+:108200001B12EDEB309E139F57CC1EBC12B70E63B2
+:10821000BCD759E0F46BB0DE33999FFA35FA672C7E
+:10822000C1240777542EFA536A0ECA3F99FC1F4B9C
+:10823000F63A48FE75559DDBFE20BCBF6570C7450C
+:10824000A85FBC59F5D92588971B372A4C83F50FB1
+:108250002504EEF344E1EDF8BC8F3CF81EF484C72E
+:108260001FC44DFE69079DF37AB3EAE94BA2F5EA14
+:108270004D9E893FF6E03E39E6FCE23D654F0D2319
+:108280007BDBA0AFDB047D2D797228E9834B3CE6D4
+:108290007B53963C9E4BE7894A2516D78EC47B3F7D
+:1082A000302F7D07D0159E23DCF729CF1FDF7924DF
+:1082B000A598CEA3B2C07684CF68BFF3E59B865362
+:1082C0005EE7B1B4F3BB1719E00BA27EC5389C2F53
+:1082D00009FE98D59A5A2CF4BBE7106F37FDFAC9FE
+:1082E000D37F40FCEC7DFAF13BB14DC9F9E18389C4
+:1082F0007DCC2FF000FB18D93F5D2CC1EF8863FFC8
+:108300003C2BF4AFEFCB3AD925E7E40A91BFCEED91
+:108310001045F667601E774BAB928878F3A2C16276
+:10832000C817D009BD78FFA2B83FDD09F6D9702182
+:108330007FDA3D1F4F69E27108935E5772A8CAA4A5
+:10834000CF55C03F94F7976F0A34E23D8DBDEA7573
+:108350006199ECE12FABDFBDF325E57DA787F37FC6
+:108360004B0197DF2DE18410B71B5831EA7BCFE03A
+:108370005CE0FDB464BE2FD8A5CE0227FC7EC6F318
+:10838000C9AA3559B0DC791C1F58C7BFD3C3DA3826
+:108390009DF6E87F872EE57F674E9C032E11E7A2AE
+:1083A00063EC49E02BBEC92698F4C7F0E1BFD13990
+:1083B00097ED29DAEFC6A33E0F7A0AF2BD4BEDB076
+:1083C00027C799DF2F517E027D8FF572FBC4B987D5
+:1083D000C7E19C9A4EF79EB97CBE51682F19ED4FAC
+:1083E00089FD66F1E13787D8619D4ECB47BC1847C0
+:1083F000A8DEBDC38B66F2658981242FC64B8EBF74
+:108400005AEAA37CABCD43D0AE6D09F3F8C408950E
+:1084100005D538F735D76E2CA64BBF6B36A652392B
+:108420000CFD09F0A836CCE7D9B9A731259EBD5D72
+:10843000FB1F7B07E1BA3D3D809F971AD15ABC10C4
+:10844000E51FC2620339F7D4A7C3A9BF4BBCD93417
+:108450003F185FC5E7209164BCEFE86961AF757EA6
+:10846000AA503BA3DF117B262A3E58CBC270F301F2
+:10847000B20F5B1D1AAEB36B0BBF0FCED5EA22B99C
+:1084800057BB6F2AB7E39279DC737B42F71FC5397C
+:1084900036FABB042E5F334B81FEB7DBF9FE380C96
+:1084A0001860873BF2DC18CFD5FA634A6A77E6F1A9
+:1084B0007BF55C6A33FB863B1AEF1EC2FB542FA789
+:1084C000ABED096119F376BA81261F23B822703209
+:1084D0001AD7807318E9F3DBEDDDEFE2F94B3A5F71
+:1084E000A7211C1C4ED63A5443BDC2E5E3F15B976D
+:1084F0004FF307A558B86A47829E0BFC764F038B53
+:10850000FC7D04CC634B88D49DC013DB739890072B
+:10851000C3564FCE8AAE83401A13F97EF63DC35739
+:10852000374D203B27A8A05D0FA52705E7C9F737E2
+:10853000BCBF604011C703FA89139DFC7D4F7B27A8
+:10854000BFB24475F376FE245FE23489F5DC676AD6
+:10855000F89DEE90C2EF5E89FEADF081911AC05297
+:10856000FDC2F344B78BE4D6074768782E31B000DC
+:10857000E9F5576FC90CEF47FAE049179D432E788C
+:108580006E33F9ABADFDAD3ED6701FE665773D2786
+:10859000699807DA65EBA6B8514DEB7B745E71EA1A
+:1085A0009E13746E4B490AD47947635EC48A32C401
+:1085B000DF58D6DC88FE3D908714A76FC9E0F2E350
+:1085C000CCD14B1E5B1185EF07BDC2BFDB1DB818B8
+:1085D000F9A655F0E73ED46FA0DC2DF4ACDDFB6FBF
+:1085E000CC8D3E87156407C81FD6C00E517EA1F101
+:1085F000BC2BA4D239B0E1AF3B6FD1A3E8AD59F0A9
+:108600007BB3182F3F29B08AF876FF9FED5E0DF3FC
+:10861000585B86A0DC6D013DACAF7CC65A0BDFF425
+:10862000E4B79CE4F771C3BA3625C13A3DFDFA9E22
+:108630004BF1EF8B00FC8CEEAB3AEE20B9B93B9BD3
+:10864000F3DF8AD73E198972EB93BD8B2E467C2DC2
+:10865000F3DA0C3A9F9480FCF42C233966F0632102
+:10866000F2A384F742713F4A21D239F29FBD7D1AAD
+:10867000F1DF6E7E2F04D039D13DD0B90FF58B429A
+:108680001FD03D7D3F94F8797BBBCCCF81831CCF3D
+:10869000A7FA24CA57D9DE3ED947FC2C036A8B902F
+:1086A0002FC307A89F16FADB75ACC4729FEB294C49
+:1086B000D21810918F7FF3703E6D29D092FC309FBD
+:1086C000444531F141D43EC9EB621F957F74D3EA32
+:1086D0000DF8F7C3DAC5BE20F4AE7D42CF65C7B84A
+:1086E000BC5F2AF6B225BF19F7ED6D30DF252F29C3
+:1086F0005CFE0B3A3920F4E043F51954C7FD428380
+:10870000751A0D25DE0754AAD7E19F2F6163CA9B16
+:108710000F6239AEA2A50C8F4C4D98D57E909F610B
+:10872000D38723FDED3A70F570CADF3DEE6098A265
+:10873000B8EB6FDD7F7C0AF351F701FEE3EC4BE809
+:108740009F6514BFA9207AEC8D6EBAA48E6BC6FB10
+:10875000410FBCA77AAA0A1B7D0D1206E0E3F57B48
+:10876000AA56E3BD803725E9C7911E97FB02C79142
+:108770008FBA5EF95B3ACAF4DD47FFEC4579BFCBAF
+:10878000AE0F473ADB9503F6401CFA3C2CE8A7A451
+:1087900097BC8ACFBCDC5EBA24C8D621FDD4EC528B
+:1087A000E8EF169CDEA5E8780EFB5D3D908E7ACE54
+:1087B0004916BC7E3CEEEFC2AE9DCFD1CEE6A3DE25
+:1087C0003292EECB30D9994C592ED33DEFAD12F900
+:1087D000272A2D7A48356B5E3518F78DD6CD769CD5
+:1087E00047D516F3F7D5A8BF8CC4B26F7BF533AF6E
+:1087F000D05F72592EEA2F403FE49FE87E4DF13F53
+:10880000C628BFA70DF37B9E96397E405E121F1AC5
+:108810007ACC569F7E1AF5CAD3824EB70B7BB47BB7
+:10882000BB44F9FDC3B6F2BCEB7127B5CD8CCF9F2D
+:10883000F2C22A851C1CA7F2F8C5B8A3B9140F1DF3
+:10884000A333F2872C68954288C74A43AF13E729C0
+:1088500060DB25BD6E2C0B35E2FD720BB74A740E42
+:1088600063D156B3FFBE7AE32B87D13C5CDC62391F
+:108870001F2FF0628D6FECC05FE2C4372E4E12FEE8
+:108880009C216C88E9BC55DBF99DB7FAAB387FFDBC
+:10889000AAE8DF68372189D34D8D986F754809891B
+:1088A000BF4FE9C6FCDB5B057DDC2AE8A39685EDBE
+:1088B00098BFBF78039F2F5B6F33DD5BBC60D7ED44
+:1088C000741EC14A4795DB78DC0D1048F19DCA4DF6
+:1088D000E6F755021F55167CD404240B5C5CDF8E32
+:1088E00085ABE57A5CDFC5DB6CF4F739AC709D6570
+:1088F000B3298FE81F0D9F759DAE33D6E95276A937
+:10890000699DCAFBBE9F2062DF98F5DF670F5F4A53
+:10891000F92E67DA72C87F60D087B59F29427F9EA3
+:10892000BA91EB99A7F794258E40BBE888EA97A007
+:108930009FE2973EF6E2798FA2BD0AC3B860576BFB
+:10894000F13A3CA7BDB32DEF5ABC8FA2E82595F6AE
+:108950008DE2978AE85E90A2978A1273298F424B24
+:10896000457C403FB4EF761DC9FB7D21CACFB6C917
+:108970002588E615478A12513FD8C9B83F427AA9DF
+:1089800024B5236A1F599CC4FD03AB32DEB907F539
+:10899000F7A9CFDAE8BCC9545BF7CB987FB0B34DE9
+:1089A000F5AF807AF54B731BF09E8AEA27253FAA24
+:1089B000D987DB97A47D07E9ACD5E67310BCDF3D12
+:1089C00080EF83DB247F3EB4AFDD7BD5F0ED98E70D
+:1089D000BDB9D81F7D2EBB2859BB1FF32A5966226B
+:1089E000D9DF532FB2D17E7A6A50E2CFE83E167DAE
+:1089F000F31494B3A79EDF69A77383DB2596011355
+:108A0000399C71F019BADFE397AF50BE42D9AE5727
+:108A1000283FA137797F3AA4B030D9DDCD742FCC6F
+:108A2000E2CD46BD83CE415408BDA966CB09AA5705
+:108A3000A1FE0FE3556D52421AFC7A70EFAF28BFCA
+:108A4000A1661BCF6F80F7247FAA307EAA45E87C01
+:108A50002EE3743057C89F458CDF33B4A8999FA389
+:108A600033EE4532E87CFEB639948716936F86F66E
+:108A700025C5219A89BE63EF1BE2F46DBD77C84A14
+:108A8000DF2D067D0F63C390BE3F99C8F3C33E79C7
+:108A90002521B110E6F3C98B0AE5DDF741E7B49F64
+:108AA0001E11FBFF99B04CFB93D1AE73CF47B48F2F
+:108AB000D41E3963477D754AEB87B40ED35BF74FFD
+:108AC000463C7F8B05AA116FDF6A4DF4219F4FEF63
+:108AD000E0726B5AAB23847EEA6FB196265CDFAE00
+:108AE0007D3F6F4A417A7982D38B21CF160A7C2E43
+:108AF00014F85CA8F2FB9EAA0AF73F88F9D0D318B5
+:108B00009737D35A84BCD964C66F97AD4525BA1937
+:108B100021B1E6ECD8FD6E11EBA0738F5D99C3E92E
+:108B2000EF4906C15E453DAC7A9B350ECEEDFA1A93
+:108B3000CB7E7A30C9F6A5EEC178C7B22ED3BBF989
+:108B40007E360DE809E3216DE18642947B067EAC1A
+:108B5000EBD2A6E526F575DEF965A1B71BF56F8B9F
+:108B60007B265A7CCDEE683BBCDCC7F5F0AAB14A47
+:108B700010D7B5C75EC93B38529323F60AD8299F50
+:108B8000250DE076CB28E8FA852C85A5A545EC9542
+:108B9000D519F74F2F4AC3FB23B8BCE81C03FD616E
+:108BA000BE80CA484ED56E7384D0CEF81F85B75AA2
+:108BB0003D008000000000001F8B08000000000046
+:108BC000000B8D576D6C53E7153EF7C31F8913FBE0
+:108BD0009A78662C34BB31F9202584DB109A40D773
+:108BE000F626A51D83141C58296AABE2B65BD90A88
+:108BF0004E5085281295B889A9D6956942DA7E54D7
+:108C0000EA56DD226D621BAB4C096A9892C8A1A19D
+:108C100025E990A0401BD0D659FC60EB9490C0345D
+:108C2000D24D95D873DE7B8D1D12B43A528EDFAFD4
+:108C3000F39EF39CE77DDED75D7DFFF29AF544DF7E
+:108C4000EDBFEECDC2C6FBA54709B63A94F069DF89
+:108C500020EA20F2449A60FB242343B0ABAF7B139D
+:108C6000254423558B4209CCBBA1EAF335B46FF1FF
+:108C7000E7E1BCEDFA52212A23EA84D5CBF2FD9D2F
+:108C80006AD6CBF33BFB25D386ED3DF99F8ACA52CA
+:108C9000A2C981E98AE760576832FE71FFF796A89A
+:108CA000D877EA928F6295D8D8322FD0FD442F9290
+:108CB000F3D9A611ED9987F6F04BEDD4800E697FBC
+:108CC00039B5C0AF878C0CD6755E540C4B47FF0985
+:108CD0000F513351F7277F1A9E1721BAF6AE64F869
+:108CE0007467FDAB8D683F6FEF9F87F9377F27195A
+:108CF00016A6BFF84DA287D0BFED4DCF95ACDFD9FA
+:108D0000EB96F89FBEB217F39247FCFA1B687553B7
+:108D10004F39616E0FED1736493FBBAE04E1AF2FFF
+:108D2000E5655CC82E581F23DA7E78A6BF24A9F912
+:108D300036F2DBF397D68EE182F1355A69E46A00A8
+:108D40005FEAA8EE96C2F1171F90B0FFE488A2F97F
+:108D50002481DBDBDF2AC4E734C058C0FD4526216F
+:108D6000CFC973257611E6FD731FC66A89C6F7C1A0
+:108D7000B90F7E5A148187BCD2B14B06DF8F713D8B
+:108D800019FFC452A23F0CBE7F2FF30109883A6C31
+:108D90003F8C798B0BE24E23A88238119791C17ECC
+:108DA0005D9F2A06DC735C35DE483EAEE36A3668BA
+:108DB00014F0637A9FD9315C8D72492745BD64698F
+:108DC00058D8DBBC39A1C4EDFA7C1BF96C35B1FE77
+:108DD000299717A44E45E388F3590D45043FBBFB83
+:108DE0009DFACA038EC5FE9B8971419BF79F35DEB4
+:108DF00066EDE0F19B9501B218B72FAD766EEF8E60
+:108E000029F406DABB3F79A9960AF6278E13F5ED09
+:108E1000F24C4599B75DE764115FD7B91BD12AB40D
+:108E2000D7D23BAB35B4D7517A3F8F7F180BFC8834
+:108E3000796DF1BEF3F37EBE0829225EE27CE1CFBC
+:108E4000A25F3A7EDD7C7B68A3C0A1C7E5D50B217C
+:108E500059CC7F554BBCC2E770F2DC7FA3489B8E98
+:108E60005FB812E47AE5EA7DE7B9BB1D3776E0F535
+:108E7000375BF5F34F83078D23AA15429EC7C68A39
+:108E8000EC76C66560DBDFF672DD2EFB88CFC3EEC5
+:108E9000C16DB5C47E138965719CC39B833F5EC65B
+:108EA0003890D423E2B2383EC435D17731AAA33FFB
+:108EB000397031CAE3C9E32B7E6161FEF2338DEB79
+:108EC000B8FFD86955F0AFF14C93E0DFB13F37956B
+:108ED0002DE2C0C908B0DFE4881A677C92234D1FD9
+:108EE000B7635EF24C5B93C4DB9C692A63FD592E29
+:108EF000513C8D7169A44AB473F9FC5C73F09B1CFE
+:108F0000021FD02F51CCE10F55CDE0CF8EDE535E46
+:108F1000CE63479F6216F228B7EE90A60A3FBF6560
+:108F2000FE804FDD69C914FC38EAD81D7DC7447E38
+:108F3000DB3D6951EFEE231E67FC8F8E253A28D664
+:108F40005934CF623C3EE62ED461ADD75E480871FD
+:108F5000B492B6A4E7D0C39AB024D68D5E4A7C9B67
+:108F6000F932DA9AA8D5EA67CFB3A84DE443928BD9
+:108F700077AF678D3D87BF2AF6873C8265B4353E63
+:108F8000C77838ECF067AD971273C5F379EE3C11F2
+:108F90001D90C18BF3ED1E8DF94F64962C80CEAEE3
+:108FA000777576D3E31ED3BB0CE3A49D2AC2F8FAEF
+:108FB0009CDEB640CFA00B71FCB1BEC5DF8C873202
+:108FC00080B4C39CA9731B29EEA145F0B36666FF6C
+:108FD00013AC970D6C55E1E76E3AF829EBE0127C83
+:108FE000A9A11AD641524A021278F3EFD31E4D11AD
+:108FF000F1DA55AC0777E697D3990FA17F3AF4EFF2
+:1090000034F48F6D77DD670D59E0313A74E9DDB0E6
+:10901000D0CF228A3101BF8277E49DD4DCBDEFF04E
+:10902000D77DFB7C7E7F06DF72F5998064A7EB67B6
+:10903000D7E786E6D421E91FF782ACD4453B5F979A
+:109040009147BDE2F0CFE74998E5C8C3D3D79A2945
+:10905000673DAD838A22BF8947259B751E7156F8EF
+:109060000A747E628124C6776F966C0B5F87EA3E36
+:1090700013F7763273D6CB7CAAE97DEE35716E2D6F
+:10908000BA40D17C1D37F89DFBF276FD72F9F2A053
+:10909000CEF981CF428F23C2F27CBE1FD7BBF7E14E
+:1090A000869699F5ABA5B38F95238E274DC9B0E76A
+:1090B000AAFB96FB4EB1DC7DDDBA2F09272261E0C9
+:1090C0003179F6C6E6A5F0375AF7F70ABE473BEF07
+:1090D000C2DF0A97DF5D81600385A02EB57A2A0B77
+:1090E0003CDE2B4DDC13669D90BF0ADE4BBC3EFB85
+:1090F000F6CB12D78304DE773B2F55AEBFAAB0E67E
+:10910000E874849633AF7EAF69CEB9F5D80B590FAA
+:10911000A81E8F9995FF5F77BB4F7CD4C075B93679
+:1091200034D2E02DA8DFF8CB38F77C8F0C7C10D53B
+:109130004B0AF925BBFC528595A48DEEFD38936F43
+:10914000E3CC37AEF7D10FD63FCD3CE9DD1491F437
+:1091500082FBF3F8F9607581DF897E45CC27355BAA
+:10916000F34469619CAF893827D28E3FA26CCDA6AB
+:10917000A585E32997B759C1DB9F2CDE19E7739CBE
+:10918000E3AD4A0E6F3BFB3A48DC476EDE692FBE0B
+:10919000202E6BD067FF06E3939EA98A70C1B9F8B1
+:1091A000A18B737346127C5C4996C27E9BE1F119D8
+:1091B0006EAB9451611FA08CE8275A48CCE3FB5D4D
+:1091C0001E37AB9921A941CCB354F072159D15F30C
+:1091D0001EA229614D82C0C3B691216C8B3FB38E14
+:1091E000E5A33E9D56984F99A81ABE0A3EB294CC6C
+:1091F00055BF7CFE2A5DCDF11393F1B8D91A9F4378
+:10920000AF0FBAE7DCE0B71AD77982EC43E87A907F
+:10921000B20A6FF2804A6B14E4F3A04AFE62C47B88
+:10922000745816E77730ABDBAC5F4699BBEE0BACFE
+:1092300043BBD974CE295F35CF34E6F3BD138755D0
+:10924000F017E2792ABDEE113866C47E0F73E0C8CC
+:10925000BB957495DBA970A5C3679A7A96F779A434
+:10926000DF27DE39B2DF1278FC34ECD433003C83E4
+:10927000F0B3EAA04463D8D758E4E49BF3BF0AAF45
+:10928000BE5023CF77EE31B4690CFD01BFB38E68B9
+:10929000B5C6784999A87C2BF0F5719D8C92883BD6
+:1092A000F8C2D4B5BDE2DDE6D30E2124A3FFA3317D
+:1092B00009EF69C934690FC7E32FC9F0FB1AEC182D
+:1092C0002F7C57FF3AFCFC5B7CDE255D13785182D6
+:1092D000747E67CCA75F697C6FC83CAFCC81EF1F01
+:1092E000C0EF4957EF2E173BBA71D8DEA8CBA8C7FD
+:1092F0009688DFE07A34FA2B9613FC6E284D08BF6F
+:1093000097A523D5C2896AAF60BF399E07C86C6133
+:109310009C25B75E7BFC8EBFE922C7F299643E07AD
+:1093200020E77EC47500E7C28FB6D5E6D4DBFABC71
+:10933000C84E61BF69392EC8F88A62F805DF6389B3
+:10934000B16658B5CDD47796F0931D7904F279A41F
+:10935000781FDCC7F4033C1041865D9A934FAA4402
+:109360005ECCBF9752546CE07144BB4A1D9EEDFA2F
+:109370006B914D95B3E33BE94B9CE4FCA665636CB4
+:1093800054DCA33B9B59EF18A7EFE47092F3386DC0
+:10939000B163A9AC2E7019619DBECF67DF93C1BACE
+:1093A000A77C7635C79FC303051224D55C9C73F850
+:1093B000685C3FE6B189FAE5EA1FCBE374A0D8C147
+:1093C000073FDF1C1C74D471E9ECFCFF0753B7A7FF
+:1093D000EBB00E00000000000000000000000000E4
+:1093E0001F8B080000000000000BFBC6C7C0F0A3E5
+:1093F0001E81C3D1F8E878022F7E7952B10C038226
+:109400005DC1C5C010CBC1C01007C42780F82410AF
+:109410006B70323024027112102F00F21702712586
+:10942000101700D5363333301C6663603805C41717
+:1094300081F8061BE9F66B483030EC9241F0396454
+:109440001918D8E4A9EBC7513C78F15A0354FE5BD4
+:109450004D54FE576D06063D4304FF9D2669E627E1
+:1094600001F526033100FBB288BA68030000000052
+:1094700000000000000000001F8B0800000000003A
+:10948000000BED7D0B7854D5B9E8DA8FD9F39EEC5B
+:109490004942184248765E1030E01042048A9E49E4
+:1094A0000A8896D2889E165BAB4340823C035A4C96
+:1094B0008F78B2212104083050AC91224E10305ADE
+:1094C00068A3A2D216DB8094A2F5F4466BABB53E3E
+:1094D00002521E3E68EAA38EF7D4C359FFBFD6CE10
+:1094E000EC3D9909D89E7BEEFDBE7BD2AF2ED65EB9
+:1094F000EF7FFDEFF5AF358AE824F23F117211FEE0
+:10950000683A4C24840C8AA784C85A8F0352A25FFD
+:109510002CB4E4C945E972F27F1B61CDEBBCDF7F5F
+:1095200021248B90EFF032FA1782FC149E31E6630F
+:10953000A424A890AE92783F5308CB6BA2402E0A89
+:10954000F0D55A6E8C53EFF08D2169847CEA64A9C2
+:109550005E458BCA69FA9633DA984F88430817B28A
+:10956000F9D45D593D1AD3AB206D14C8EC4E4F921F
+:10957000799035848CA7C9FE2122A988CF3FB19E5E
+:1095800091363510D2658FE765998492F55B41E796
+:109590000FFD9E13C215381F0F91011E0A87878D7C
+:1095A0000409A1EB3AE29F169843E7DF3A5909DA3A
+:1095B000A160FB10684C7C061C67E761DEC1F39577
+:1095C00044E3F0EE6A29A4ED9C41916CA0B9A6FC9D
+:1095D0002A07292564F3C4BF06C2743E4E3942549B
+:1095E000483DC9E7379388BC9F7BC9E5AC3B713FD9
+:1095F00064D8A3F19815615DC67CB7D8E8BC32E9A0
+:109600007E8C17C95E9ADF543E2B0DE663ACCB917E
+:10961000629C6680EB0842363638306D9A302B8D6E
+:10962000403BD23B1BF677F3C42C718310AF7F64B1
+:10963000E271470F5D6F236FD7AA1D75407D639F51
+:1096400013E1B699C32744049CF7C6D1AED9D1D251
+:10965000FEF308111F966F76D246B00E2F89EECD1D
+:10966000871E7ADAE6D2BC6F825AB641EB8F2F534F
+:1096700046CBC12E3A4F8FC713B4D3724F80B57704
+:10968000BC2144356C1FF20CA1F55DC6FE4F10E302
+:10969000F0A4FFF7916A42283DFA727A5F8371EC79
+:1096A0006FD88321FADDFDD947AFCDA5FD92934256
+:1096B000702F8C4B965BF68BEC6170B5A9F4DFB420
+:1096C000DC3579FE0C5882FBF327AB016EEB8B5631
+:1096D000B856C35E95B0FD53E9FF2E16D0FE35C5D2
+:1096E00032BECDBCBFF9809AD6BCBB78D6D70AB5FE
+:1096F000D4F8E1EEF191AE0C5A59BA05F73B55BDDD
+:10970000FA37C65E73CC346E1BF1669E71D37F5CF4
+:1097100045AE423ABF44FB4F1B82D71CB3E1BA456A
+:1097200033BF49557F2DC78F3E3CCBA7F8518AFBED
+:1097300019B86174FCFB4B8017400F7A25F231A4F5
+:1097400045BADEE6AB49AF44F7A3A958D1D65038A5
+:10975000D855A54BF0B1317B01BFE01FB4A9BDA81E
+:10976000B95B180399EF58F860CBE07F0D760D30A8
+:10977000BFC47DF8A2F0EB02F85D11879F9D54A74E
+:1097800075C17E5707103E5E3E8F7557AFD4BAE85D
+:109790007AD6657F3F749298E07815A3B3BEF9E45A
+:1097A0004489797C83BEAE14422F027C2425F85A6A
+:1097B00098C2834C52827B93AC4B16185F89C3D9F5
+:1097C0002113034E80BF87F5C00D5E9C52B5C304C4
+:1097D000677BE0F867003F399374B9C7E0F7263933
+:1097E0009DF2AF4CA2BBD3B01719F29F917CA44F4E
+:1097F0005A3E452903BE302D18A6E334DBF878EA3B
+:109800006ACBBE7EC6F7355EAE07FED9526EC3FE8A
+:109810009ABD9C6FA88D38BF7EEDFDAC7DE27AFFCE
+:10982000027C743CD45339FE340640DE3886344F13
+:109830003F02701F51D73917D6A8128483C1FFA9E0
+:109840000024508FCA87CFA09D43AB46B8DB73423C
+:10985000248C70B3CAD3947C39418EF6C32795E625
+:109860008D3E0AE0BF392AD21B4994DF3C0D0DBB67
+:109870002C39D8984057B4ABA47266B4C0F82DD137
+:109880003371FDB281075C3FB019E0D8CEE859E5ED
+:10989000E32A301FCA0F9D248A9DBB29A643DE4BB5
+:1098A000EA30FF49A8AC4B00BC91C97AE073F6904E
+:1098B00048F4FCFEE36FE6F224D53A364F4C2E070F
+:1098C00086094C0E489E3ABE1FB7A84067821E26E6
+:1098D0001781DE4884CBBF20EEF7BA867AF20E5DA0
+:1098E0008CEBE87544A3F823E7D48542B49D04B417
+:1098F000485934F194B3540E6A66FCEADB47B21A55
+:10990000FBB351B0C03A6D1EC71C320652F5064C6F
+:109910004B46DD0EF4614B9B560FAA1CC59B4A01BA
+:10992000C67724C72BE2A1443A11F35A75D2F1F855
+:109930007EF37A29F1AB0F3F8CF56A4AB5B73FDE6B
+:10994000B8CA5501488166BB613E83F96C06879BA6
+:10995000978B6360DF22D387D3FD19DC3307E59350
+:10996000F78DEBCEC3BAD696969D00152E2DA8DEA8
+:10997000308DEEA7AB840800EFF5D0D924E8E18460
+:109980005E09721DFE994DC8B7856743BA87A18FDE
+:1099900055DF1435D9E027E280FA8B70D1DEBF7D28
+:1099A0004AFE4C4CF483727CC5E5E94BB7B0F174C8
+:1099B000FA3FA03B7F823C4D0B99FA25001FEB3804
+:1099C000EB006F10BECBFF5BC653C93687067A47E4
+:1099D00091A846E9D86944F5535E4C5C536402F2A1
+:1099E00044CDE9D5617B2FB52F6B09998E7C94D23C
+:1099F000AD19CF77723E10A869CA6FA6FD7E52EEF0
+:109A000009021F184CD966467AFFF56C4CD0B33763
+:109A100096EE46FED848F1A800F4FD5211F5A1F5E6
+:109A2000454FA86679F57383DFF4C30FA2C915C843
+:109A30003A08A1F0918AC49073CC3F8E1F897AD2E4
+:109A4000E5E287FB16EB7E7CD1FDFA759FFE7D7902
+:109A5000F8F18F8E67EC6B2ABE45F715F5EF166DA2
+:109A6000D680FA4BFF7DDD86FBEA2A22A1647CB812
+:109A70005B10ACF2C99C9AE507B9D3B25FB6C2AF2E
+:109A800007760F000F5B49829CE4FD3AEB25ED342D
+:109A9000E8B1B28AF2C8B01FD66BDB74D0E73FC919
+:109AA000214CDF8B2CEF12400F2A22A807410722FE
+:109AB000CD3BB5507483C0F01FF6C5D06F6C541DFC
+:109AC00033C357525D963C99AD0BE6F93BEB159CC1
+:109AD0008703C603BAF4D00E69BF520EE972A2FE24
+:109AE000C9E60F43313BFE9ECBC203035F01AC0CC2
+:109AF0005FADED9A036524D9FEF51BEF26EB7C5391
+:109B0000F2A5C4761E593B63D24752B793C9199345
+:109B10005E33B4CF7FA11BFADC2181EA858D81AF52
+:109B2000EB386FF80F95AF2D905279260DA9226171
+:109B30000DE4A4C6E8444B67F2B743B0D8E1C6F7DA
+:109B4000D4F360E3C56EA7B8087C4DD62CFA7262D8
+:109B5000DAD810F8924C91D25DFFF024791C55624E
+:109B600057876657D3FAEB1B3A26C177A3DE54D149
+:109B7000B0BFA9D834E9C732A1F51CF8955C1C0721
+:109B80001F55A299E4BB83746239FDCAF78FE03E8A
+:109B9000A05E45BBAC1335EC572187B01E7404F5AD
+:109BA00028179F2497B0EE20BFD1160AE1BCE488A5
+:109BB0006305A5BB8D4E9ED778DECFF32ACFE7F3A2
+:109BC0003C951390772B344F53A72DA262DEC5F33B
+:109BD000F93C9FCEF37E9E2FE079611BE6372AACDD
+:109BE000BF0D7294F5EFE2798DE7D3795EE5F90266
+:109BF0009E27BBD9F8769677D9A2AC7F37CFE7F30B
+:109C00007C06CFFB79BE90E785DD984FB57FAEA28D
+:109C10000E06A73EBED019CFA3F0E070EDCB77259E
+:109C2000E419BE64080C0F635F35F02688FC917858
+:109C30007291DE86F0368DF3CAD877EE47317D3FDC
+:109C4000A15139F749584439996ABEDFE7FC743BA2
+:109C5000E8B934DDDAA062BAA521807AEFA6068DD4
+:109C6000FB554AF0FBFA8620E6D7354CC0746D43AD
+:109C700008BF37364CC7FC630DD598EF68988DE95F
+:109C8000BE8630A67B1A1660BABBA10ED328D57744
+:109C900021DDD5A063BAB3A105D31D0D114CDBE6C0
+:109CA000953D5F04F35F40E73F007F183CDBEA0728
+:109CB00019546DE58BE953D22DE5EAE46CABDFA4D2
+:109CC000BCC092F7948EB2E45D456596FE1C399354
+:109CD0002CE54A6695252F7BAEB7E4AFE89865C9B9
+:109CE0008F8C7ED3D2DF88B61A4B797164A1A5BC64
+:109CF000B06585259FAFFF8BA57E5EFD1A4B799BD6
+:109D000033FCAC48F9D5B0BA0D967A43176CB3CA98
+:109D1000AB199997C5B7C8C77A96D99F91C8EFA5CF
+:109D20005C120AA1DC62F2A511F016FC5EC3487455
+:109D3000AF00FEAB6B4F80DD612F6272A79F7D99F4
+:109D4000D09FE2D9F79A4EC7A9F49D08F498E88C01
+:109D5000044CED28DF3F2532BB79C3BDCCAE6EBDD0
+:109D600037B97D8D9C9DAEA3F5F3E4FEDB1E51E279
+:109D70007A906EB1535AEF15B0FE3FDABF519ED8BC
+:109D80006F7C3C8A7315663D246AF845899E15B739
+:109D9000776D3DFEB960F71876AEE460DF2B4B823D
+:109DA000279B28BCD7AA04FD866B3D5504F48A4F37
+:109DB000544637644F2EDAE346FDFEF333E915C807
+:109DC0007F5C563FAD6716FA3DD7660EAC972931DA
+:109DD00009FD77524C205D54EE2872F5F47C4ABFA1
+:109DE000CA2B52703541F993D4BE27641BC2414A35
+:109DF000D06F9AE625F0BD29C370DD36BE8EC6CC85
+:109E00002AFCDEA40E3C2F3BCC0BE6C3E7658BB9E6
+:109E10003195624E9CEFC45806E627C4FC985E1547
+:109E20001B8A69456C08A6E363859896C7F2311DC5
+:109E300017BB02DB95C546623A36360EBF07636331
+:109E400031BD32F625FC3E263611D3D1B12FE3F7D2
+:109E5000D25825A657C4BE82DF47C5AEC37464EC92
+:109E600046FC5E12BB01D311B16F613A3C7633A65A
+:109E7000C5B1B99816C5E6605A185B84ED0A6277D9
+:109E8000609A1FBB13BF6BB1E598E6C5EEC13437CE
+:109E9000F65D4C87C51A31CD89ADC674686C23B6A2
+:109EA000CB8EADC77448EC7BF83D10DB8A6956EC6D
+:109EB000014CFDB187B15C8DB5639A16FB217EF72D
+:109EC000C51EC5D41B7B12BF7B628F63EA8EFD0C5F
+:109ED000BFBB623FC1D4197B0EBF3B624730BDD4CC
+:109EE0003E2939563E2E65BA2CF909A7D32DF851D3
+:109EF000F186958F97BF5260292F7BD1CAC783C740
+:109F0000CA2CF931872759EA971EACB2E447EDB75E
+:109F1000F2F1923D563E3E7CA7958F176DB7F2F158
+:109F200082562B1FD79AAC7C3C7795958FE7DC65E2
+:109F3000E5E3D98BADFC3B30CFCABFB3C80EABFD58
+:109F40003D65B755AE4D7ECCD29FA7FC09ABBDC0D9
+:109F5000F98CABF4A796768EA2A349ED9A447F398B
+:109F60008044A6F47D377105CDE72A469ACEF941A3
+:109F700006D01D4D3339DD0D02BAA369FA5716E339
+:109F800039D3A75F6DF95513ED2C7D28617E017DD6
+:109F90005B15F8BD9A87F03CFD22D07ACDC308FA54
+:109FA0000988FE6E2596E7B3FC0FA433953AF3DFDC
+:109FB000B2727281953B59FEB1C67F5B0DE5E969CE
+:109FC000A1EC20ED678F2D391F7F4262E76D17C42A
+:109FD00050BB44D7FBE7CA9E95E047B33BC27B2505
+:109FE000FA7DB1239C07AEE90F6CE14764E08B2456
+:109FF000B40FBEA791D02312F26BAB5FB415146EF1
+:10A00000DACFC762F57E28CF98D9817691B1EE6616
+:10A01000EFC0F3894A4C2E35FB09DA8DFAA30ACA40
+:10A0200053FC33E4059583F7BB7D2128DFF5A8B207
+:10A03000DBCECB2D72A33E0BE586ADA37939B824D8
+:10A04000EDB09F5232BF680FE6D340E32F04FBBE52
+:10A050003757A6E9527B5733C8F5BFFABBDF122446
+:10A0600084C7AF003E2BAF0F63FD35EE9913603D03
+:10A07000141E27E03B85C7F3D2A0D4F02070B24075
+:10A08000E71F30B068BF60F13F9E13C2BF954C7EA2
+:10A09000CC403888703B20A9080F037EF4EFAE74E3
+:10A0A000C31FC3DAFD11C74DE84FE6E762BF95F85D
+:10A0B000F85C1E1A789C21927032F81BE73EA423AC
+:10A0C000F70BF9B39D8A98741C9B5C8DE7A9FDF88A
+:10A0D0005E66825D9F1986B35E2A3FA9BC4C32AF93
+:10A0E000690AF74FC97997757E15E5FA3DD99FFB47
+:10A0F00085CEBBC0D083FA438D7D3A968BF951BC97
+:10A10000FD50D0EB283E3DF7A6FDE812CA07765178
+:10A110009E614FE20FD8D521E2F9FA503F45385AF7
+:10A120005ECFF5006A13A13E688C2B2FB6FA8F2202
+:10A13000360EC7C356380EA588FD536A72134F1EDC
+:10A140009B1F3FB734FA69EF9BBF751EBBF52031EB
+:10A15000DBDDF9ABA322E83572079DC798FEE31358
+:10A160007EBE60D091ECE17E13350FFB35C64D1CF1
+:10A17000874833F03C29157CFB8DF305CFEB2AE4AF
+:10A18000E4E79D747F104E4529F43CE3BCCEC83F04
+:10A19000F7662D9E7F37476A50BF6B0EF073F6BF90
+:10A1A000D15EA11F921C4FF6727C7A889F8BECDDEA
+:10A1B0005EE5C0769979967D2ABEEF265798E967C5
+:10A1C000E990EE6B63F5863F308F7FAFC1EF0FAD47
+:10A1D00062DFF3EEFDD8C9BE7FE88734AAB3EFDAB9
+:10A1E0006A99D717B13EA9A77FA673A0E16AB508FF
+:10A1F000FAEEF0ED2404DFF2D45E01FCC89A4A4482
+:10A20000DD04D7ECED472BAFA3E5D991EA59D7C1CF
+:10A21000797898048B35F8FEF2EA91B88FC401FB87
+:10A22000BD83AF3B2712DE3012EACDA6F548BCBC99
+:10A230008D8F3B2C12DE761DF8EF4A583F46F9F71A
+:10A24000797B97511EB2B68FF0F2DC55A7BA46D093
+:10A2500076B991DE97AE857A1DD67A9B79BD51503D
+:10A260000EF3085AC769E5F390F4DD04D0438A90F1
+:10A27000F4E9D08F6AED678381BF505E8EFFC6F22E
+:10A28000870DBE90C0478C762D29F6DFE0273BC1B5
+:10A290004F3002FD5598E6B426F7BF96717E65E013
+:10A2A000572A3C270B448B7D47C22E6B7EB649FF55
+:10A2B000837C28DB5A3EA1C05A1E1C65CD97945959
+:10A2C000F3DA244BFED33E3F4BD409F460F8590C2B
+:10A2D000DFCC0E95D149DC8FD7ED34DB2539BCDEE0
+:10A2E0008375CC1FD3E8E1F4C4FD322E4E97CD2503
+:10A2F000CC6E31D6FD24E75711EEF7D8D5D0C6FC89
+:10A300003063438E7CBA9F2DBF938203F9A11FE770
+:10A31000FBF1634E8F07B8FFE6877C5F1EE5FE9B6F
+:10A3200047C07F03F40AFE1B3BEC3FF3DFB473FF2F
+:10A33000CD43E0BFC17DADE67E98D958DE06FE9BD9
+:10A3400011E0275A80E916EEBFD9C4FD371BC17F43
+:10A350003302FC422D980EB231BB7CEBD45036F860
+:10A36000CBF64C4D6E170FB231BCC8074586A6B967
+:10A3700024F46517E02F456C3897293F167ACE4DA7
+:10A38000F323A20CAEE50743CF4179711BCB17F243
+:10A3900071409E807CA1FF60713639541B32E1EF21
+:10A3A000B817A3640EDDB7B7657E0EA051D5232B79
+:10A3B000EE2F8572D8A73785508F3C1EFA25CC8F9B
+:10A3C0001F0E0B401E83EFEAD5155A4F5DDC1D8230
+:10A3D00036BE96CE2EB0B335BD0BDB6DAD0CA29F55
+:10A3E000CDD8273ABA051FE8DC902F0EE3FB4F26A5
+:10A3F0005BF12137B60BF5E1E6BA596988771A198E
+:10A40000D05E2FD969D517866FB7DA49CD77CD1AC7
+:10A41000D0BF9CE82F53275BFD65CD2503B7F7958B
+:10A420005BC7F79426B4F70CDCDE199B39A03D78A6
+:10A43000855893611B14CF17C6AEC1FA89FA9F0CD9
+:10A44000F16F54AF93A72821380796A7A8187A254B
+:10A450004FD1781AE4DF433C5FCDF22A8B93A0FA08
+:10A46000623E8C43F727E1FC3B44E07C7AEB48C238
+:10A47000ED91DA35A11C9AFF6782F6C449F9CE2A1C
+:10A480009DE677CC7088D295806F2CDE41E1FB95FC
+:10A49000A144D723DD6E15C96E9ADF131998EFF525
+:10A4A0008B83F084D07F3374B15A260D40F7DB17CD
+:10A4B0008BD3A349FABD86D315394612F5EA6B6CE6
+:10A4C000F4FBDAC5B354E0FFF24D41B41F88C6E691
+:10A4D0006FF0B98CF481F76F57C27C7353F87556DF
+:10A4E000DB38BD9530FE68E07FC64A86E7A9FA5F93
+:10A4F000C7F959AC53B0F87F06DD545D69CB447B96
+:10A5000028E8013EFAB9C4FC688759FC9A414F8D8E
+:10A51000252F23FF36C6CFCEE902B38D341F99C84D
+:10A52000E22A287CD15E3C42F97829F27B02F55D73
+:10A530000B7A2A991F3D8AF10FAEBAA00E79C9C3D2
+:10A54000F005EC515E1FE7B3E1AE5921D8A7C61C58
+:10A5500012E420C6751A78D018103134E29312A68E
+:10A56000F7CA2AE51330FF9132CE9FEA59172F1A06
+:10A57000F68B04E789BACEEC37167765C4E30D6D28
+:10A580001B83F8DFEC5D89E785FA58A60748A49B92
+:10A5900088F9381F5D2C077FBF1A04596FCBD4058B
+:10A5A00033BE7D4D08DF0BFB1EC7AF4E8C4731E03D
+:10A5B0009708FF6F71BE9A4792DB1F83B97D93A105
+:10A5C000745E077CB7E5518AE749E266FCBCDE0FA2
+:10A5D0003A66A5012919746B941F90341CC7C80FE3
+:10A5E0008D292CFEAFCB6AA7FCFFAEEF1FB459E359
+:10A5F000F3FE47DFFF1F7DFFFF117D9FCBC7A96BD8
+:10A6000060236C1E962F6F9EBA46C7F559ED7649AA
+:10A610000E5AFC1FBD40FF26392F7BAC7AC9E5F3EB
+:10A620000D19F527121C66E1BF19D903CB19C3CF49
+:10A63000F1E930439F0F215D90A21262D6D79A8034
+:10A64000CF5338EEA470E47187384E365F97ABA7CE
+:10A650005A17317EC2CAB7772E38EA1C81FC5FC612
+:10A66000769E406708E4AD43EB46FE6BF069CA9FF7
+:10A67000C72A8380CF5720FF739544307E6D2DD736
+:10A680004313E10AFC305006E325F021A2A53BA0CC
+:10A69000FCBB0C0764F0E3819FB27E603FCBE5C654
+:10A6A0007D187118B9F40FF8D04699CD8F1CB2C639
+:10A6B000B1537C7458E275CF3D8CF2D4E8C7D077A3
+:10A6C00012DB35A9556A32BEF8A610FEBA32009EDA
+:10A6D00024FAB548021FA71C54007D6EE88CE9E8F7
+:10A6E000AFEAF36FC956BE2E078CB898FF5EFE5EC8
+:10A6F000A7FC9DF1EB5FD0FFB78B9FEF27D2716274
+:10A700003FA24EC49E24E3E7EB62C2B9B355EF17F4
+:10A71000648DDD13AAB39ED3C89EECE4E7093CCE5A
+:10A72000B366421FFE7EE38F147FEF3861633C8C7B
+:10A73000CB25C3BF7B07C47BD2FDA981F84F2ABFBD
+:10A74000E7916A1F147E40448C2BFB80BCEC1B6796
+:10A75000DAA77D0AF3E79316DB29B86F64C435DE08
+:10A760001E6179633EB56DD6FC7C322B0BCE35E68F
+:10A770006FB7118863BC83C8A77A8CF9533DE7FB98
+:10A780000A8BD3AE2575CDC0CFD672FF7D8D4A64BE
+:10A7900088435CF2CC8315606F1E50981EF52E85A1
+:10A7A000BF668A575BE8892A703EF1CEC1715FFFB0
+:10A7B0001281F6D1E66C8847A47A2DD8BD89709FA6
+:10A7C000DB629DDFA5E69F385FE37E52AA79C81D54
+:10A7D0004228991DF133C51A3777A97B536F8391AE
+:10A7E0008CE720D67B53976A775AD148B2FB5697AD
+:10A7F0006A77FEEF1CEF428AF196387A14E003CBB9
+:10A80000E4F074A1201EF7A5D8AA43432928E44305
+:10A8100063BBC0176EAAD77299F54E80017219F505
+:10A82000A68B03F47781D3F1AFF63FAC007D7EF0C9
+:10A83000D8C99970EEB3E8671271C0BAF67B4917B0
+:10A84000B34F1490630B0F4AE88F237257C58DA640
+:10A85000385A8CB8A5EB5FF4632FC6692C7CC21EF6
+:10A860009D41DB2F7CFA9D3184C2E1C29ADEE34335
+:10A87000C1CE784C6071897ACF981BE9F78532B9DF
+:10A88000AD3A091FF4D8199EBFFF13F76CC023A17E
+:10A89000E3C8ADD86FE7376C76D3B9A064B7E1B839
+:10A8A000B45E889D6709D16281CDCF7CDFC2880705
+:10A8B0007DFF5181CDEF902DEA84F975B42B615A5B
+:10A8C0006F59C75F106FBFFCE3033E80C3B2439272
+:10A8D00085BF2CEB90BAEC63303D69C7FB34218F08
+:10A8E00040F9C8526431343DB804E3C797766EFC32
+:10A8F0008BE483F656FAA1700976015C5F9582338A
+:10A9000020FFE4233EB01BDFEDDEEB03B8D27EE791
+:10A910002814AFAEF9D8446784F51F4BEFDF1FD57D
+:10A920007414C0AF659DEBD97809F4F92EFC634827
+:10A930007FB930CE6E950B9F90172BD05EEFC84835
+:10A940001A6FDF271738BD2E3AF0C92E9D8EFBFEF9
+:10A9500013EFEDD2E9FC17FFC747BBEE01BDECE7F3
+:10A960004E15F8CCB2C77EE72326B8CFB433BFC1AB
+:10A9700085471FD9B783D2CB853FD8D1AEBDF0EC88
+:10A98000D95C8DAEFBC2E39F6569B4FE5DCF4E1D01
+:10A990000C70B8EBA92F0F1EC84F00F81AB59BF723
+:10A9A000358AFD6B870416DC7F98A709FBF3DCC1B1
+:10A9B000E772619E1FBC66C7FB8CCBE8B7FA32D842
+:10A9C000AF25C8F721BF8AC279E9FE757F91C624F9
+:10A9D00083B73E54C4C3454A3601D8EF1BBF7675D2
+:10A9E00039A4B6A006FD915EE4DB89ED96BD42F781
+:10A9F000F5CAD4FBF809F99B02F05FB67F3D1B371F
+:10AA0000611F3F807F4CECBF8F8BFBEDE3E287D073
+:10AA1000E638989134FECAD8C7254FFDF3807A8076
+:10AA2000C10F2E05DF053C8E70A23DB4CA0E74F531
+:10AA3000845B0FB0FD8DCEA065170E7C924B287EF7
+:10AA40009CB3F5DE0A7CB2F759BBBA9B7E5FF8EC8B
+:10AA5000AB4867179E7A49D1904F128F40F5840B0F
+:10AA6000A4EFAF1BF486A5FCCC79D91E6F97DD1738
+:10AA7000DFA7A5D11BA66B3EFC7E12BF4719FE2F98
+:10AA80008D1EB94948B26F4FDB0B183F8F0E42B88D
+:10AA90002C21DD8A5A6ADD4F6102ECE3C9698077B7
+:10AAA000A9F6D158BF0AEBBFCAB49F7B18DD26D6E2
+:10AAB0005F4AE913FC887DFB1A155E2549E8F442DC
+:10AAC000BB5D8678E10BB64BDC03FE82FA5FA73DE7
+:10AAD000857DCFE170293ABFD4FABE28FC76817318
+:10AAE0007B507F38BEFFB7E4FCFF45CE379692F02F
+:10AAF000F46CA9BFFC9248481F9A1F9F6F73A784EC
+:10AB00007CFDFD0E290A4D13F9C4D2147EA7D7EDA2
+:10AB10004C1F597AE8C818E067EF1FFD09C74B863C
+:10AB2000F74BF79F54742E0FA2667990C23F799A23
+:10AB3000CF7BD9E1E4FD2DDBFF97A4FDBD2B87BEC4
+:10AB400001F37FB7DB4674DAC5BB9D52523FEC6F11
+:10AB5000EC364B5C61B3B7E2B534DA4EF2B9341877
+:10AB6000BA714DE8551DF492976D78DE41E4E039F5
+:10AB70003BF813BD2E6D038557A36F3EFA2B8DFE58
+:10AB80009A12E02407AA75B04BE5CCEA72A62347D7
+:10AB90002D76B14D152DF3A6723607E4D05B63CF49
+:10ABA000DA609D6F27E8836FCBA47930EDEF6D5DA0
+:10ABB00008AED692E1B7B5FFF02A896866F967EF6B
+:10ABC0007D0BE6437EE12410A722FDDCA9033F595B
+:10ABD000B6CB1985B880E79EFA741FC0EDC24376E4
+:10ABE0001E27C0E2CE6B55D6C7D9A73EDDF5EFB420
+:10ABF000FC2C34A6E3D7EEA2F5410FDFEFC6E0FF51
+:10AC00003F3F91368650FE5CFB8B7B66027FA90539
+:10AC10009E4AEBD7FE7830EA756706B1FC9903C30C
+:10AC2000A2B02F8B9F7C7629C891453F7213701973
+:10AC30003CF7D4ABB742FEC22FBC182779E11767A7
+:10AC4000AF013AA0FAB36696E37798DF2BA0FD2E0A
+:10AC5000823C2B172E9AE26F16414AF9C6A243692D
+:10AC6000780FC8540FDB2DB3F7AE0CA23F59CF16A7
+:10AC7000D1C6E9CA063A5CD4611D6FA483F949972D
+:10AC800029BDF359FD4836A3D76E6C57E1E078CA69
+:10AC9000CB13DB1BF5CB1D05967A46FBA5765297A9
+:10ACA0000CFF2B79BF8B3A3E1F61ED8FE16BFF717B
+:10ACB000D8F7EF08EC9E0A79DC89E76D8B95AEE159
+:10ACC000E9945E9F56C802A0DBC5BEAEE17E3ADEC7
+:10ACD000CF389F5CECA279FA3D9BCF03EA439E38C4
+:10ACE0007A7E04FBBBE41927017C5FF20B2F9ECF19
+:10ACF0002C79FAD3333FA0DFDF7FCA8D7E9325BF47
+:10AD0000B81BF77B89BDEB56F0FBF53E6E477FF332
+:10AD1000FB8F3F9F0B7AC8FBB6AEDCF401ECF3254A
+:10AD20009D76EE8CB0AE83DA052575743EFA561624
+:10AD3000C7564F5CC1D5109F028E03C0E3379C2CD1
+:10AD4000DE8A9FEFAEE0FEA00FE7696938FF52E6AA
+:10AD5000DF5AC1FD072BBEAA0DF69BE60171A66462
+:10AD60001C21772B752380CF4AB1AF108DE6E558B3
+:10AD700021A6463D490DE2F98394C9CECF6D994194
+:10AD8000525B0AED585C12F15CDF4767FF8B6EF196
+:10AD90008A07B4C1D0DF4207D3A7DB9CA1BB1D68E3
+:10ADA000CF78F07E29AE933204FD29B6AE4F05B6BA
+:10ADB000AEC4F97E6AD3EDC0CFE3E7DEEC9CA55EBE
+:10ADC000D65E85F34C7282F3A57EEB6774F6A19A8A
+:10ADD0008E7466AC6363838AFC647D4300D3750D17
+:10ADE0002544C3FB0141CC4B1C1EF6529D4870DF2D
+:10ADF000566373B57BAA43707E017DE2B986278CCA
+:10AE0000F8650FD4A1EDEFF010B44F258F4E6A3DD9
+:10AE1000E80F4338C1B90CC049E179B96D06C29554
+:10AE2000B6C7EF2B9DE15D001747CE280B9F52322E
+:10AE3000CB2CF97E7033F0E2C07F37FC08C26B7D0B
+:10AE4000830353B85F017083FB1590FFBF00BFE31E
+:10AE50008EF1ECBE8366A21FB8EFA059E82905FC6D
+:10AE60001EA0F0CB8CD355221CEA797C9B414FA9C4
+:10AE7000E817EEA7C0E5836D0D6D981ADFD353C8B0
+:10AE8000F5E14E81C7058457DBB87F1CF7215327B6
+:10AE900039267F1209E8782F0AEF5743B987F9114D
+:10AEA0008DFD9554F98C95FF69AFC27AEE7EC1266F
+:10AEB00002BF92EA1F26EF6498E87846B5534338FC
+:10AEC00007D17FDBC8E5EBDABEFDB4D2C7C6060DFD
+:10AED000D34D9C4EB6703AD90AFB0EFEB9A0887BC2
+:10AEE000DA3A9DA0FCBC8FE6997DDF45CC7E6D7F74
+:10AEF000B0B3CB46F71F7992866917F2AFD7ECD182
+:10AF000062DACE5D4A42802FFED7BE1BC5B592CE17
+:10AF100000F843FD1C7EE47081FF66F69E828DC9B9
+:10AF20002922B1346203FB2911BE8DC1A30EB0BB2F
+:10AF300053CD272BA8DB73E978596FD8917F67DE53
+:10AF4000D2F95A0D5D87A7D58DF6645690E1A327F7
+:10AF500018166A4DFB979542EFDBE7BC2ED349E903
+:10AF60007810C4F3D2745B5BA113E0BBD1D6190097
+:10AF70003EB8D1CFE48C369B8E7695A93DE78FBE47
+:10AF8000722BFD1BFC589D5C66C16383DFA64FB12D
+:10AF9000E2BBC16FCF3B983ED7E6AC1EEE8478DEB5
+:10AFA000D84EA4C744FC6FB429BA40F59446D025C6
+:10AFB00041BF3B29B0B894FE7C00E3563EECC9DFAC
+:10AFC0000DEF0EACE1F1D43AA517943BDCFF699C80
+:10AFD000CB1F20D52DF00E4C0BC52302EFD550FC16
+:10AFE000017AD84CF107D208C51F4627133035F037
+:10AFF0007326384FCCE7BF45C745769F4304994336
+:10B00000646A077AC0CF7464A203F442D9C6E259D5
+:10B010007ABD6227C4B3ACF5CC7284C0AFE32FC74E
+:10B020007DFFABB7266FA07315785104F046F50489
+:10B03000C9A9D2F8BD5F492D23604F1EF074E3F912
+:10B04000DED54ED132AF3667F846A7C9CF3F1A4694
+:10B05000E7FBF64FB8FEE4F7876F73723F658E4EDD
+:10B060008A4CF46DC499124D2725263A5F533C8DC6
+:10B07000C039687FFA4EC1C7F6FED7F0B1C6BC280A
+:10B08000EE9B2D916F6452FEEEC154175538DF3B95
+:10B09000D4F42D3FE2D95D000FE2D9DDA7BFFC5308
+:10B0A00041FF7926F2ADB83CD2D05F45E5D1FD1322
+:10B0B000800FA6904747DE1CF1358596BFF3BC2470
+:10B0C00098FD750B62EB511ED4C626128DCEB7A625
+:10B0D000ED7B98CE6F6B47BC3F175DEBC3389A167C
+:10B0E00066CF9D8BDAA2523EE2ED4509FCFA84F56B
+:10B0F0007F6E6723D623E07D318D7B6E276B4FCA31
+:10B1000035D4A73FE46BACD9620FC139CDB936DA7B
+:10B110006E0078D6803194443FC5F704E0EE00A974
+:10B120001B017CCEA0F7BB15CA97000E6FD993FA0E
+:10B13000D9573AA7EE00BA5EE90CB533B8A75FD687
+:10B14000BB16EF8854EF4578877D3758FCACCC8F21
+:10B15000F90ED78B892345B98FB75793972F697D00
+:10B16000EFF8BD34D75C1AAE2626FB5A22CCBE5E61
+:10B170007AA892BF2FC2E693043F993EDB6A473E0E
+:10B18000348FFB830C7C8DE34BD8C7EF975AF0E9E3
+:10B190008ED856DC6F61E3E8FB2752F87D44F10856
+:10B1A000FC72C2C6AB07031DADDEF0A52DB7D0FE05
+:10B1B0003F7E51C2EF0B624EAC7FFEDEE0FDB780FA
+:10B1C000BEFE6F36027CE4E31353F13CF6BCCDEADD
+:10B1D0004758E462F2FA1CA7E3F9B18D16FD787EB8
+:10B1E000CB5C05FC8FF3639BF1FB7C3894C17B2027
+:10B1F0007F3E5629C3790DC1F3D173CEF7A7AC01B9
+:10B20000381C2E433F56ED267BD27B29E79C9AE5DE
+:10B21000DCB9B6A715FB25543FCACCE2FD99F84727
+:10B220006D0C2EB1C0FEE804EE2DCCE77CA46F7E41
+:10B230003B6D163E72DE99DC4F12E37AC9FCD8975B
+:10B24000908EFAAFEF1A465FC6B83D8CEEE2EBB9CE
+:10B250007F62B2F5C4D73119EB9FF7271F3F8FC329
+:10B26000F94CC30212A27CA8C64EEB7960FC3B9B52
+:10B2700027809DBDD39F2E98D655DBB688844CEB96
+:10B28000AADD3947A931F51BDF07E72FCDFB90B7C2
+:10B29000419EBAC60372BBDAEDA270AED978F598BA
+:10B2A00030DAD98C9FBC630BE6025F3DDB766752D8
+:10B2B000FACE736916B950DBC6F787EABDE5A6FD7D
+:10B2C00031F625B1FD99376BFF7A2FF8011E604AE0
+:10B2D0004D2A78F5DBB7FCE4709BE862787986CA82
+:10B2E000D930C24D7BFA35C0EB4D6E8CF74C0DBF9B
+:10B2F0002B487820F8A5D05FA9BE53E61A0FE312B9
+:10B3000084436D1BC3834BC12D3E2EC783CAE4EB20
+:10B31000A9EDC3837AA253823DA55C0A0FEE21BA40
+:10B32000638075F4E1C1680B1ED4BA8AA7023D9E02
+:10B33000033D6544FFFD3FA5E8BE49700EB441C220
+:10B3400073A6532E3DEB9B2C3F16F8F3295F64E662
+:10B35000A4F278FE8EBDC5BE39A671CFB6DCE94B2E
+:10B36000E667AD4D853F453A29ADF83F873FEFA4ED
+:10B37000B8C7B5D259B908F6934492FB738DD4E09F
+:10B38000DF529AA7CFEE04797ACA53F0D7282D3D21
+:10B39000E40CAF047ABA5BD4C6CC11E2F6673FFD89
+:10B3A000B361FAD5A78BC15F587DF5691BEA43D815
+:10B3B0001F01BD329FC745A07F6308CA83C4F3D273
+:10B3C0001FB8F2939E8FAE6DA81B07FD12874E54D7
+:10B3D000739C1C617AD4FF86F1F3E3EB516C613509
+:10B3E00008F6A540AA01CF6D72B805EE03DB0299FD
+:10B3F0006375135C1F7031FF97F3D8B1967CDADE6A
+:10B40000F9A7175582F7CC74F4AF3972E40FCDFE6B
+:10B41000695B268B5F2445A6EF0510874CF3163B2E
+:10B420009FCE77003BF567028383EEB5F37B75BA59
+:10B430000472EF662731FE50FFFE8311072237B1F9
+:10B4400072BF51DCC4CAB9FF72590DF34F26EEEB3F
+:10B45000CD87D775833E73F3E12173C18F75B367D1
+:10B46000C49FE07CE167E0C3077CF733B99CD8EE6A
+:10B4700030A7D36FB58BBA8DEECB315BEF5137CCA4
+:10B48000F73BEC1DC76FFEEE98CD4DD3D75F396506
+:10B4900083773B6E83001DBAAE39445398121CC5A6
+:10B4A000F67349A797E53B07CDF29AFBA3A62AF4CA
+:10B4B000B79C9DF37EF377AF4C05F14FFB5B0BE937
+:10B4C0006D2F1205FA9F73506B66D7F8787F8769E6
+:10B4D0007F62BCBF381C1566E7C80E844B1C4E0E3D
+:10B4E000849B012778E606CBE370467DC380731FFB
+:10B4F000DCD2665F4FC6A4A6979B3DC3FF44C6C47B
+:10B50000E79508E78FA188D2DB7157E88F403707AE
+:10B510005CA137205DECE8CD950BF01E630FE4973E
+:10B520004AE1BC2C8A671F0C0B8F1804715CDDC9C3
+:10B53000CF5713E9F42DA01788FFE67198B7F2F5FD
+:10B540003DF7DDB35E8CB37CEAD55C4897483D9B04
+:10B55000BE01F4F66B09F5EF0F0F8E18302EED2DAE
+:10B56000EEEFF8D425F2F303B6BEDBB81E77DB416D
+:10B570007714DEE3BCAD5EB2E8BFB7D5B3380E22B8
+:10B58000778FB9C9A24736A5EC07ECCEC47E8CF5FF
+:10B590001DCDCDBE02ECC387C62B1AF81F8EBCF89A
+:10B5A000E11F6A69DE35CC81E7B29BFC1C7F2B452D
+:10B5B000DCF787FC21F768F03B6D480FEA749D1BB0
+:10B5C0007E493A450A9FA3235746ABE8789BAF16BE
+:10B5D000D167B525F670A40ADA95B2778F54AE8F8D
+:10B5E0006EE93ED506F878F6353BFAFBD3BD12CEB0
+:10B5F0006383AD3A17F4F73FB52B49DFD97378650C
+:10B60000ACD72EF460BCDB5C127100DF38D83D6B28
+:10B6100030CCC717242AA0FFD99D92C8F464C3CFA9
+:10B62000D125333FBB2EB37C88A7AAD3FCDEDDFA3D
+:10B63000E953309E625EEB4B184FEC2B4F7ECF6987
+:10B64000829BDDD7F576A7635CB4778A886F24790F
+:10B6500083BD02B4CBEBAE52B07D4418B07DDE2A80
+:10B66000F53A802BB407FE9F7799ED836E05E1B024
+:10B6700095DBC9EDB660F314DA4FFB26BF00FB6122
+:10B68000D4BBCECDF499B3530CFF4D04FD37B9456F
+:10B69000AA13DE5BC90D2171136F79C401F0DA0DB5
+:10B6A000F5987F13E1D03EF2E92E383FDE00B2017B
+:10B6B000F6D9C6F069C32601FD99147ED9202FFE64
+:10B6C000749FFD2BB08EBC164105DB9BA649E7BDE0
+:10B6D000DAE360F2A6F57EB403C13D0AFDE6EEFCB6
+:10B6E0002DCECB9B62BD3FF430FCF8D325F023C7B1
+:10B6F000CDFC36B9F5DDDC4EEAC2F716230027C8CB
+:10B7000087CAD93B87724833C7A1C4E987D9617416
+:10B710009D18075A334189821F406C69C77785E7B6
+:10B7200046ECE45ABABE56A13B04F4A28F17F97B4B
+:10B730005EA1B7004E9BB70EC678B675622817FD9E
+:10B740003BFFAAE0F9D8D1D0870FC0BBBCBB2628ED
+:10B7500048174743EC9EEC43AB0ADAC10EF7D657C5
+:10B76000E17BC1515541CED2584E5E8078D2C6554C
+:10B77000A22AD0FA916AE33E82EA02BC182B7D74B9
+:10B780005D099C9F0D11C19744CE0AEC9D91B5AB0C
+:10B79000AA54D8D7B56AA660B65B748E077FF457F3
+:10B7A000EB6EBABEC0BDDB548801DF12CBB802FC21
+:10B7B000857A8BA2B1778BD9FB24197C5F32BAC50D
+:10B7C000AEF93ECC7B16501379CB64E6A7FCDEF5D0
+:10B7D00061E65F8433C90AF42FF2BF00EE6B26CF17
+:10B7E0006D18E5C2CCF635F3B13EF49345FBC9289C
+:10B7F00017BB2A68BFBBFDA15D284FA63A104E4477
+:10B80000EE69033845A76607E1DDE46D1387BF04E1
+:10B810004F54659CE89D0572343ACCF57A3BF0A90B
+:10B82000B58A06749EB1EACC2DF0DD1FFCFE9D901A
+:10B830006634FDFE1E9007FE9EBF34E0F7E98AC520
+:10B84000BF97F1C6F9CFA13CA35AB1F8093FF3570E
+:10B850003FECA6F0D9551A89D468EC7B282BBE8E14
+:10B8600003ABBBA7C3FBD9676F1083BB7939AE6B42
+:10B87000BB1ADDC0E0560E72CD80DB3A51EB84F787
+:10B880009DF5990EC48F22D28DFC6A089C2217C6A2
+:10B89000F725E38DF5CB214E22713ECFB885BE77DB
+:10B8A00061E09D4A8CD7A7724C1932C50578FD78A6
+:10B8B000597700F4F84DFEE4F1099F7A587B7B8AB2
+:10B8C000FBEE1F79183E004B6C2BC334341A520F19
+:10B8D000D1D320CD7184203EF67151FB23E2F9369D
+:10B8E0004983FD81FA36BA7F475E7817FD83472288
+:10B8F000BFC5F4654F097BD78F125C16BCB35B7E66
+:10B900000ACF4736AB0C476A5B18BFA80DF438E086
+:10B91000BCA2B694A8BB39BEE9069CC1DFC5E555FB
+:10B92000CD4D0CAE99A504CF5BC12706EF9E6541B6
+:10B930003D0ABFCC96D5CB711F49B75E48EB6D86EB
+:10B940007E617F9AD8FD14427A1C48BF1109CF1B33
+:10B9500029BDFF06CE136B5A07E3793B5C7787FE60
+:10B96000D2F9B8E9BCBF76DA0FF8FFCEB648643733
+:10B97000F2B76E78639868AB282E237EF65696D081
+:10B980007EB57255DD60E081C1C72869CCA3F202A3
+:10B99000E0364FD79703FE9D72A82FC03CDCDBED4D
+:10B9A0001AAC7FDEF667EE06BDC51DE86901FE50E4
+:10B9B0003B81CD37BD957E47FD46FB0DD4AF6DB5C0
+:10B9C0006B6C3C0EBF728E671C0EB7F379DFBE93B3
+:10B9D000CDDB352C1A01FCAC5D45E10A656186F7CB
+:10B9E000E0D2BC28225D9D80F57BF52CEC77D0EC75
+:10B9F00004BA48C03F635D357C5D35ABD8BA08A753
+:10BA0000273AAD2EE8B7A69CAD731E61ED45F84E02
+:10BA1000FBBF9DAFA7467F1AD3DB5BEC96FE779505
+:10BA2000ECE986F9E4972A9A807066EF6DE6F27584
+:10BA3000E536B1F1724B9F4678917AD37CD12F6A6B
+:10BA4000CA53BA3AFB3C252C78CC22D781C874EA79
+:10BA5000BB0A9EA3146DB7AEEBECFA110FB782FFD1
+:10BA6000F33E05CF2B1E17836FE5A11DAA688CFF3F
+:10BA7000047F3B03F8F4ED4D78BFEA402583FFD9FE
+:10BA8000AF9228E043F189EA748077F189304FEB77
+:10BA9000F01C9B0244E8E37B747ED4746A11805FDF
+:10BAA000C60A7FB800F800DD67D0078799E74DE741
+:10BAB00097D192550571489913D2AB147C4238A1A5
+:10BAC000FCC48E59F01E6EE6B11D77C238438869FA
+:10BAD0003DB4FC4A6F21BB9F758C9642BDFA33F78B
+:10BAE000C27EB4F277ED8B6166E9981E833483D20F
+:10BAF000F7C67498A74CA694C5F9C1DEFB2AC60206
+:10BB00005FC1BB2565987691B2FE7CC3547F24AF9C
+:10BB1000AF0B49EA5578358B5DBEF7BE6923C17E10
+:10BB2000DF0C7A621ABC0BA87E04F1317A5044B85B
+:10BB30006FB675394A33E1DD719180FEB2A5E4F745
+:10BB400022D0DDE6832408F89151FD1F76F33ED61E
+:10BB500079FCB86E59211B81FE8F8E3C331DF6296E
+:10BB60007A84EA9DB47ED5AF3C3BE03E71FB1F5822
+:10BB7000FC49FBF37528BF57E62A49DF7D2697D09D
+:10BB80001313EBA717CF423F5EDEF6ADF8BE6CEDA8
+:10BB90007439782DAD9DB9BDB212F418AD9A62D743
+:10BBA000603AEF9D635703116A33D87995369D7DCE
+:10BBB000D7A6B07463C3827160B7473A6467119DBA
+:10BBC000EFA8F5ECFDBE8DA51F3AC2542F2DAF7C1A
+:10BBD000C2F155FAFD74399582F4FBE9C91F3AE1C7
+:10BBE0007CE6A1F2AA0C80E7C116AB5E47E0713695
+:10BBF0006A078DB647425E3AAFD6DF1184A764EF7D
+:10BC00006AABA179E9190F6838FDEC9BF5ADEDB38E
+:10BC1000014FE795607872FF7DE7F2626E7DEFF489
+:10BC200002A05B9DB073D4C8FDC8946FE72C235F5E
+:10BC3000EF46A6E3DDCEEC93881C3A0E7C39521A0F
+:10BC400056A089C1CF5A8B6BF6013F53B8DE4FEA3D
+:10BC500016E0FD48A47F09F4A1DECA6476D3B7DDFF
+:10BC60002EC4ABB33B6F7C15FCD3F3EA99BE9FB7F0
+:10BC7000F32301F783EA7D4368FF79E5F8E425992A
+:10BC8000B72AE2180DFB5324124D83F97412B01336
+:10BC90002254FE98E160F4FBF7B6DFE1B1E33ABE6F
+:10BCA0000DC6F3F8F87A3C7C3DB9C1DECA64F1B345
+:10BCB000DFE2E37EE7C18F8E4C04F8AF6226525E6E
+:10BCC000E4A4E030CD234FBFBC79DC02FDD1793C48
+:10BCD000E961F7A7BDE53D78EF2891BF833A0F747E
+:10BCE000BBCB7D612CB3EFADFCB45F9EE355E2F7B7
+:10BCF000DC047E35DADE793DEEEF01F6BE3A2194C2
+:10BD00006E1DF8ACA8C6DE9D8D1AEFA0D741BD51BF
+:10BD10005E8F0A78D03AF2F765009F4D5C5FB8BD40
+:10BD200094A0BD7A7B4E37EA0B739BB8BE20079B6D
+:10BD300081C9BA77FAC90693FE802E2C702D357111
+:10BD40007DC190FF5C6ED706BA5B50AE827E60927A
+:10BD5000AB353A93AB790126D76B5BE8381A47E6E7
+:10BD60000AB35EC2E4B8B69DEB0F5C0E67F07133A8
+:10BD70005B98BCCA003DC207E1073ACA653CCBCB21
+:10BD80008AEB2D834A99BCCC687D1CE5DA1FC0E99B
+:10BD90003208F8069397C35E7A45073005E8E73620
+:10BDA000CAA78FF1F2804AF5B3F4B87EB64EE4E745
+:10BDB0004C84E987185B4FE77998D737BEEFE1F3FA
+:10BDC0007BFC58FA5780BFEE8D148C954C748B5EBB
+:10BDD0004F9ACF2D67E7F4B9F5EC9CDA1B9CBF4F67
+:10BDE000329D3F6CF5707BD3C0ABFAAE00F48BF79D
+:10BDF0001D918FB3F7AAD6537D09FD4FDCBE9AEB98
+:10BE0000E67E0D8E3FA9E489C187BC24E42BA5F012
+:10BE10003D1DDD87FC5AA7F612ACED74A4317B21E1
+:10BE2000D07BE4867298FFE6897FC5B88BBC14F698
+:10BE3000A2C3EB30E0F085F8BA77FA2BCC0EED1602
+:10BE400093DE9399CAFD0F9D3271033C9D11F6DE7E
+:10BE5000A1738292B4FE042FE39B195E768F68F380
+:10BE6000C47D78BF31A57C96892E2591A786BC6DAF
+:10BE7000857D9E44C8CCD65B9B75B4D3A3D512F206
+:10BE800057760F30C27F77462F51D06FD86A8B38E4
+:10BE9000603FB694F37D551DED703FFD0BEF0B85B4
+:10BEA00007ECF3FA901815F2619FA3EA68E6D7C190
+:10BEB000DFED394BED77F339C52CAFC8E1A489101C
+:10BEC0009F98D7C2F06BF34405E7B1616C56BB9401
+:10BED0006FE6BF02E79F0C4E1B261E47FCBADCF93B
+:10BEE000CDAFBF67D269D339E299071E290038C7A1
+:10BEF000DF6F090D787F617EFD4B93F624391FE8D3
+:10BF00002B073BCA037660F49BE67396855E6667F3
+:10BF10002DF11AEF3333FE06FCD586C645341BFCE3
+:10BF20004B07AE8EFAD07FBF989DD7DEC1CF6BDFB7
+:10BF3000DD7323BEBF301AEED426D9F7F30DD6F742
+:10BF400017CEEF7D249BF935A216FDEA8E7D3F19B1
+:10BF5000C5DE9FD1F9EF72102DB382BDA38D72FAA9
+:10BF60007850B74BF1F7D114F85D0CF0B703051713
+:10BF7000C22BA09D987A807E0BE1F7857A315541DE
+:10BF80001C15829D14C4349354639A45EA300D9075
+:10BF900008A6D9A413D31CB0730B412EF462AA11C6
+:10BFA000552426BE5F4082982F22D598CAB06F19BB
+:10BFB000F17309B9C381F117707E01746F9C531836
+:10BFC000E7FB377B6B1EF02639AFB8C71BDAC1BE63
+:10BFD0007721DF9ECB59F8891F8DEA84FB3D2B36F4
+:10BFE000B1FB25065F47BB86F6FFC3742607F46DD9
+:10BFF00002F2AF35EE99D7201C5B6DEF9BCF1B880B
+:10C00000C35104BF3F63F43B97FB17E672F907EE99
+:10C010006D76FF2E88F77FE6829FC1544EFACAD90B
+:10C02000FD6BA31FD13D79F840E77BA6F6188F5C26
+:10C0300093A0FF5F526E27E4E725B6FF1B9D505685
+:10C04000DC0FF7C36BB45C76CEC4E43645240DDB5D
+:10C05000B5D84FA21D16991A32C3E5258EFF863C2E
+:10C060009997E0D74F4CE7C99C2E12FAA192CF0FB7
+:10C07000F766F00D14135D1BEFE81ABFD375472860
+:10C08000AC0C61CD02B08F2A9F7784ECAC1A42D3FE
+:10C09000739037F9F37FE70BBFED35D1891AAA13F7
+:10C0A000CDEF34CDE77438556AAD04FE76364C8258
+:10C0B000603FDC41EA36833E465E9190BFC13D6CF5
+:10C0C000F8FDA06170A0918E795DA1E9070DEC5E8D
+:10C0D000CE1978476904BC7FCDDE517A0FDE4DA2C0
+:10C0E000E9E8B6BB67021EBC0BEF27C1FD5B4EFF44
+:10C0F000C6B8A33BDD7340EE8FEEBCBA16EA8DEEF8
+:10C10000B0E3EF45951C5C5F0D7E2178CFC545C738
+:10C11000C9A1E339D2818F1094B7EFB5BAA26BE809
+:10C120003CDF6B93902F7F522AE2BB23F06CA6C4B6
+:10C13000E797960EFDFCFBADA087BCCBF988F17E9E
+:10C14000E47B951ADAC7BF3CB04E807B09EFCDD1B6
+:10C1500070DDEF0DE9CC4D07B9E463F1E545FBED8A
+:10C160005D05741E0B1FFB43410DF0BF82C8C26406
+:10C17000E7CCB93E264FDE7B8A603CDC7B4EFEFB83
+:10C18000488E4E9FD9CF1AF00916BEF59E97FFCE66
+:10C1900052CE25EAF1F872E2E9F431BAEFF4C1794E
+:10C1A000D4FDEE1FE1FDB5334FB1738A5F3E509B66
+:10C1B0000BFEA8229FC6CEBD0F3C8971E3B00EB026
+:10C1C000A3E9FC3498DFFDEEB7DE05FF036D87F7CA
+:10C1D000338C76670ED4B2FA6DB4BE0FE14E7C6537
+:10C1E000800F0CEE643FE31386FEB8289A85BFDF0C
+:10C1F000102F17B11CA6E8A4F01FBDFF063CD7AA5C
+:10C20000F0A5337C563B47CDC2F94772611D07AE9E
+:10C210000EE7821FEF8CF17B52722417E070B33768
+:10C220005CE133ADFFFCC96790BF9788756FDF0B8A
+:10C2300078F904FB3D93BBDFD82A9AF9C7541FD382
+:10C240007BEE772FF5C179D499BE7775222CDEE786
+:10C25000307BD77511A7BD33EDD47EA2F038BFFF78
+:10C260007B587EA6EFDD9B4E8C273BBFFFB9744801
+:10C270006B783C3F89DE88F445E1D2E24822AFFA90
+:10C28000EE4545D97DB70B027FCFF441036E75CAE9
+:10C290002CCB7915A3EF9C9DF9C7505F8E26BF2745
+:10C2A0009728EF13DFA7BDD43DE0539C4E4FF377A3
+:10C2B0004DEEF1866B7C49E448CDC625B900E71AFE
+:10C2C000B85387710E95D782BD8DF74DD8FBB45DFD
+:10C2D0000827E3FD59FDAA6B21CEF18C9FE5BFBB7A
+:10C2E000B97A9DCEE1C8EA4F63EDF359F97D504E1E
+:10C2F000EBFFDE5BBD9C8D4F04F6FB48363FFCCE6A
+:10C3000085C1FF52AFDFFA3B171DC093C7637FF7AC
+:10C31000607F32ED6FF43FDE9FC16FFEE17E1CFF58
+:10C32000B5FD187C18E81242F6483038EABF027EA4
+:10C330007F6F7B323BCFC2CF3F7DA0B019CE813E15
+:10C3400009B077A2ECADAB09C8A5DBB76F4DFA3BDE
+:10C35000797D791E4FA214523A33D1F3F39CAF3E4C
+:10C36000EF8B9F07C0F9CC7042F87B175455C9C2B8
+:10C37000901BB4FF46F077E34B4804F5AB51A41390
+:10C38000D352D28DE918D28B291E931682AB2F88F7
+:10C39000E99F2B7B2A60F18B1DE1872054D7EE08A3
+:10C3A0001F077CFA6058F8117807788D7BE924988C
+:10C3B000FFAF7DAAF17BA224E1F7D9E2BF2BA281D6
+:10C3C0005E332330905E4354F9FDBEF88D027C4706
+:10C3D000F8651FAE2FD5EFCD25FC8E25BF476CC06D
+:10C3E0006109E9C438885FEE5CF102BCEBB370BF51
+:10C3F00017E5C1F09D4DF87B620B497716DC2F1DC8
+:10C40000CEDF93206DEC1D0FE39D88916D76CB3BC5
+:10C41000164B127ECF6811FFFDB14589BFEFC5EF06
+:10C420006F6E840F49E20812EF7FF6FA52BCE75AAA
+:10C430009AFC776512EF7FEEEF1431BE6705C40BEF
+:10C440000971BE37724F9DDD8A5F9DD71499DE83D7
+:10C450006A1482CC9EF6BA427B85FEE38C53197E29
+:10C460001D1084A47164DF4C33EC9B26723DEDA754
+:10C4700071B1AC82BDD91875E13968A3CAECC2A10B
+:10C48000DE2A07D8E9C42FAA703F659A3419E3CB96
+:10C490009525F23838F73CB67B6137DC5F680CC80D
+:10C4A000E8A71DEA67E7A0648888EF0334A94FF87E
+:10C4B000E7C23E79D839E33095E0EFA11E695F29E4
+:10C4C00042BE919A2D83611C21DC8DF76E86C88453
+:10C4D0009FBFCE189B85EF98F138A556BC7F3C6571
+:10C4E000C96927C8F53CBEEF5569F9B84E99EFE721
+:10C4F000AEFA537EC0D3E7DB9B5F9E46FBB3456538
+:10C500008C6B2DF9BCF1F56974BCDE768598DFE3A0
+:10C51000CC5D255BEECFE6DC65CD2B09F788656247
+:10C520002AA7F972181FE148F544735C55668839EB
+:10C530000B550FDE0F0EA5094C2FE6F90AC85390D4
+:10C5400074D822552E3ACF8E3705F43B1C6D9F9F31
+:10C550008771FA3F09E7017E1BF890B87F4A9A6617
+:10C56000BCEFE1E4F7839D705897883F4D0DA41808
+:10C57000FCD18EE831D715B08F276CF89ED45AAE17
+:10C580007FCB1E16FF6EE04B62BA3601EFD67E7E81
+:10C5900023E25D2FC5BBDD03E09DAC6AA827D872FE
+:10C5A0004810C8C396D99DADD276573CA3043D141C
+:10C5B00064D37E5C9A06FACC15CFDDCCDEF5A3F011
+:10C5C000C27721EB9562B0FBEDF599C57206D4F305
+:10C5D000203E7EE861E73F72BD3B08E58DED150129
+:10C5E000CD84D7CD0D6AB15C0CEFE3388AE1779644
+:10C5F0009A53FCDEF330BF580DFE2585DBFF77A68E
+:10C60000B1F9DE99E6C674451AF35B3C28EBB360DA
+:10C61000FE0F52FC817881237731FC5D31C481F7B4
+:10C620009E573C5F3878A038A07D0D816280DBCEBC
+:10C63000BB6AD0EF51B9FC9813DE055BE175A880A9
+:10C640008F926FF8FD9301DF5FB0E1BDAF466F855C
+:10C6500036D7D49FE49B807E2549D4B3C1286AD9BC
+:10C66000F2D6B5F244C0177D0748A248DAF16B65EF
+:10C67000CA5F3ABC7AB640CBDBD25E60E583F41D7C
+:10C68000022D8FA6FD86E587E9D9F04B221D692F83
+:10C69000B37CB1BE03F29D69BF67ED41B7A07ACC10
+:10C6A000A1B4D7AF053DA7D1169C0DFE9D1FD1F9B2
+:10C6B00097D2F977F2F4A71C4E46F913F09DC2FB0E
+:10C6C000204F13CB9FE6ED0EA528FF292F3F9CA2FC
+:10C6D000FF9FF3765D29DA1FE5ED8EA5687F9CB795
+:10C6E0003B91A2FC055EFE628AFE7FC3DB75A768F4
+:10C6F000FF326FF74A8AF6BFE7ED5E4B51FE3A2FE5
+:10C700007F23A1FFB778FD1EFE3DC7DBF23ABC1BBD
+:10C7100096D3CE5E022DF1B6A0FEBEB3AE1CF1BF25
+:10C72000713CD3330C7CCF81784D9ABF52657ECD5E
+:10C730002B55C6E75FE1785DB9BC680BE0DD8A7F09
+:10C7400093509E523982BFE7AB2F67712F2B9E67A4
+:10C75000F741562C97F1F7800C7C34DA1BF3DFC5D8
+:10C76000E7D764C031AD809FB7048A6798E33D5531
+:10C770006BDE41E90942769A32997C29595EE518C7
+:10C7800001F283CA17E09B6B3D4A17DCA35FABCA7B
+:10C7900058DE9459A542B9AECA287FD6665639E606
+:10C7A000A23F271DFD13793C6EAF4995F11EBFECEA
+:10C7B0009F82E5D37E3C43053EDA447AFD95B0BEC8
+:10C7C00055329ED71EA9ABC2EF79FE8FFDC09F7F69
+:10C7D000E367703FE63DEE84775FE5EF88282F86BC
+:10C7E00003FCE8B805ABC4A846AB1C535788907F40
+:10C7F000B889C92BFAE71D6B7A77B16365C50B1051
+:10C80000BFD3B8490EC2790EFCC9267950C47FF750
+:10C810005453D32DF2EA41EEC7D5030E8CC32B92AD
+:10C8200049C0FC7B989A2AF17729D83B668511ABE1
+:10C830007CCA6FB1BE63F39FD7EF7F0B008000000F
+:10C84000000000001F8B080000000000000BDD7DD1
+:10C850000D7854C5B9F09CB3677FB309BBC96EB2FC
+:10C860009BDF4D801024C006420C88BA090122A229
+:10C870002E880ADAE286DF00493670A962C5B22145
+:10C880001103450DB71181825DA85AB462438B1222
+:10C8900031E88A88F8157B43AFF6A2F67A17A48AA6
+:10C8A00080B06A45FB63F9E67D6766B3E7245168AB
+:10C8B000FBDC7ECF870F1EE69C397366DEFFBF99D7
+:10C8C000CD23CA89A889E09F8BF984289A764EA344
+:10C8D00069B052C4DBF4AFD16553B52DB664C787D8
+:10C8E00049F41F5EE2BDA82364D9EE65932DB439E7
+:10C8F000E917C503A2C584AC30A58C2003685FF896
+:10C90000732D21CDAB3AAE19A42764EB2A3A2EBD84
+:10C91000367F3D7A26292524966CF1ED900859B38F
+:10C920008A8E3FB8A7FF681BBD3986906D4A683A6A
+:10C9300071D06B58214D745EAF2C9709B497B94DE7
+:10C940006123EDB2EC8DFFBC6E08B497CA5EE2E9DC
+:10C95000795F7B7D72956B307CFF2D3A2718571FCE
+:10C9600090069F1C4DFFAD045CFE644206B625ACEC
+:10C970009FFECD6FA5ED84F5EAF57E9BCD4A48DE9E
+:10C98000B7C04DEF7CCB1E2886F1151C5F3B8F6F27
+:10C9900083EB1AA9B1880CA4573A57804FC829874E
+:10C9A0009FA0EBCC5E71EFB8936984641DB2B400B4
+:10C9B0005C49DBA384A413A2836FD3752B92CF436E
+:10C9C000281E5AF24BBC12BD1E7ED6C2E0946345AF
+:10C9D0003819246FC6F5F46A94FD36189FFEF1C12C
+:10C9E000F80FE458B6AFCB8766C00470C8DE4907BD
+:10C9F000CC84F6C0B53E85E289829B8CA37F43BF81
+:10CA00006BF5D175ED94E2ED6A6877840DBC3F89D2
+:10CA1000C0FF76CB127B4EC7575C84EC9224F63C69
+:10CA2000E4ADAECAA6FD15DB30C54B48D056DAAA38
+:10CA3000CF81E7B278DF47CAE9FAE07BBC0D70F935
+:10CA4000F941F1BCB2B56A101DDF40C4F821E8BF5E
+:10CA50005B9679FBAA56187F57A5787FF05A5F3608
+:10CA6000CEE77A9D9D90FBDA26B65ADD3DF37D68D0
+:10CA7000C3F5AD4D747D9F78A2297419A47EFBC9BE
+:10CA80007442875A3333E007380261FB8713724AD6
+:10CA9000F220BD08FCE9F75484B2E8ADF387FE9CB0
+:10CAA000524CAF415DF45012855F7D67C0A42FA04A
+:10CAB00070D6FB4259F93DEFD5EF994602946E824C
+:10CAC0005D2578EDE3BDC38AFC77BD67325CC2F7B4
+:10CAD0003E89FCB6E119FAA85E1768B50EC4FE845B
+:10CAE000E1BFEFF589F73F79E6B7B7C2F7CE79A294
+:10CAF000E953802E23142E7DBC27FA37745610A0DC
+:10CB00007B29C9B7DEE624641E853971027F357A38
+:10CB1000A17F87A9CDE6A5CFCDFA36BF97F6A7A806
+:10CB20000CCBE53DD7876D83703CED7D2DFF749870
+:10CB300048DA544AD7A13AC5FB0481762869046DC6
+:10CB4000AFAF574637D129AD2EF9DDA862683F67F0
+:10CB50002546DA6EAE3BE82A063EF21A08152F6427
+:10CB6000FDD80E37F0714BBD61E6E340BF9165AE75
+:10CB7000F9C53DE33F64D7E33CD6BE46F96C24BD1E
+:10CB8000EA3BEC12BC3F5821C087663BC5336D9B26
+:10CB9000DDA924940FFDACEB811FD7EA03D595D016
+:10CBA000CF2D9327E877CD83675457D279B89CB2BD
+:10CBB000A4C379541D5B409F37DB0C20D9C87BF69A
+:10CBC00039CF019C7EAE781B810F7F6EB5DA42F4BF
+:10CBD00001958D3EE05B65B0230C6DA38E3476D05D
+:10CBE000F96595107F87B5679EEF71F9F89ECD8046
+:10CBF000705E6FEE985641C7B12C936D21FABDB5AA
+:10CC0000F51BBB27D1EFFCB8FEF9A34DF4FEBA74B7
+:10CC100085C03CAC0E256248A1747C039D239DF722
+:10CC2000AE26BF0DE467CCA9901DF4B9659081785C
+:10CC300012E4A0B598B613E4539A43F199E9FB7F47
+:10CC4000B2078EC0FC47BFF99609DE778D9165600B
+:10CC50009B0E85E139A5543D8E6DBC7A9CD42AF596
+:10CC600073C754F5F3F419EAE7AEEFA8DB99F3D4F0
+:10CC7000ED5B80DEC640473AE732BA0EF68858A22E
+:10CC80009FAE2229089F7700FE9642D90BF031D73C
+:10CC90003F7E6A017D9E05F284CE9F8C20E127288D
+:10CCA0003E0FE47EDF13A57036A6367AECC5BDE1F3
+:10CCB000919563BA1EF0651DA4D808ED6FFDFDC700
+:10CCC0005FC3F85692D02F1FE0E3FBC43686B55DF4
+:10CCD000743EC9F00F0FC0BBF17FEE03BD7754E780
+:10CCE000057867D52BF8FD076778C2BA7CD69DD04A
+:10CCF000FE29BC7F8A697DB76E04BDFE7EED525D64
+:10CD00004A6FB8A6934609F892D207EA0B524350ED
+:10CD10005F3C20935AA01BCAAE04C6B3C10B54CECD
+:10CD2000F8530D0827C5CEE887FE4B86E7E936366F
+:10CD3000A6C13DCF0CFC7CFF2146FFF71BD838F184
+:10CD4000F13CF851544120276D765935CE461BEF02
+:10CD5000C3DB4E3B6BEF3E987A3DF0E5C619A9A3C5
+:10CD6000804E8C3209C07803B24DBEA1747DE63787
+:10CD70000C21890E3A402107F5A9B4BF85DCE9A74B
+:10CD8000F3D87CD812D2D1FBE6F9FF6EA34026255A
+:10CD90007CDEBB577BFF13E440AC4641389A9D6D67
+:10CDA000B651C56C0D213ABF54F807958F1583DB3A
+:10CDB0006D804F73451BEA6F73495B1BC069F35469
+:10CDC00019ED89D47932D2B339A7E3E8207A5F3FED
+:10CDD0005FB6C178A954B11BE8203FCA6EF3FB616E
+:10CDE0005C0A73B98C910A8C8B2BA4DF49E37075B4
+:10CDF00038F6DC2DD171D260BC11AC3FC0C9CEE198
+:10CE000034D6EE413E75F071D306D1FE23D8382DCD
+:10CE1000653DE3083C6EAE2661989FF8AE18273E4C
+:10CE20003EF1492057F5BFA670A37892724D38B9EC
+:10CE3000FB1793B0311FE0E36FDC8E7C6D253B80E8
+:10CE40005F1CD99540479987B74C9747C07B16FC24
+:10CE50008E7E3E09031D672AC4744D2AD82F7E8416
+:10CE6000A3965FDD07DB6EA63C12C78B967FDD0ABB
+:10CE700069D5A5F6E663B7C3515938A20F7ED6F03F
+:10CE80008BFB70EC7B40F45ABE7E2CE95C09C085BC
+:10CE900024F6D77D7B5BA7EB383A09909541F504E2
+:10CEA000057DAEE67B84FCCD086D89C89E8B034171
+:10CEB000EEDB391D537D459975F728DB042BF0E92E
+:10CEC0005282F455B977FDEDBFA6E35D186CB081D1
+:10CED0005EC939DCD60DFA91740686001EB62A8129
+:10CEE0009F24D1E75B8F651090DB6BCD6426D0B7B4
+:10CEF000C2E95CAB5F1E02BE71226B8465D7DF7F27
+:10CF000015F660C7A0F461361B8CFBFA6193F37FC2
+:10CF1000D1CE0A0D433B2BFB60779315BE6F9BDC94
+:10CF20006AA2F035BFC9FA3F48DBA14100BFBA3C55
+:10CF3000E0C303390B104ECABB4602743A5CE70BE0
+:10CF4000439BBC6726207F773EF79D5A0FC89FF40E
+:10CF5000291E90433F017EA7EBD9C6F95EBB7EC573
+:10CF6000E00B803DA1BDFF685C2EF94FD5503C0E13
+:10CF7000FFA981ACA30F8BE439ADF9C0176BA9FCF5
+:10CF8000A54FE7E83C0D3F947AF0D369AED86587AA
+:10CF9000EFAD32918091AEEB2B89042873E6387E99
+:10CFA0005B01F227974424D0B3B98DD4E005BA5A77
+:10CFB0006E2181047ACFFE4AC1FE9D66DF2E3B972B
+:10CFC000FF262A07F4EC9FE4E7A97E52E360320AC9
+:10CFD000EC17FD3396E3203788A3CA17F7370A808A
+:10CFE0007EA9DEA7DFDBC7D7ADA76A423F8AFEB5C1
+:10CFF000CA11E388DEFD5FE6FD14933502F252B1FB
+:10D000001E3986F2C5A69C4DEC670A337D43EA487B
+:10D0100078B0C4E082ED7FB3613B8BCA5FE328B494
+:10D02000FB434698670AF33F88CFE771A403BF101C
+:10D030000472B689B49A683FA476CA6F6ED26D4600
+:10D04000BBF920F1003F5088D9C13F845B00D7ADC8
+:10D05000845427F281B88EB4313E5056E8D05F1A1E
+:10D06000F6AA19E7A36F246133D84330370A6F65F6
+:10D0700039092BE06FAD3060BF91360FBE67208D50
+:10D0800068CFEEFAFAFD4C90D39643D41E1B097874
+:10D0900096514E592C6AFE23A409E1F409E7BF6DAD
+:10D0A000AB6C88E7B87F16788BE339DA04FA22771D
+:10D0B00079AA0ABFA25FF6575924303A71DC308E44
+:10D0C0009B3DE8A0448AE1792E3EDFB6CAF32DE30A
+:10D0D00017F433BE1BE9A8FFF1B3F1F9B6C85BF64C
+:10D0E0001B2928B6C60EDAFD9E1EFB5A0BE7ECE59F
+:10D0F0006AB93CB253DD167031EB7D8E6914E6E6F9
+:10D10000EFC9DEED74BC2B8FA9FB55E7BF8DFE6D1B
+:10D110004FFF88E366E84FFDEFED201D4EA9FBFBB6
+:10D120002B5EB3031FF7F467F3BBF62B753F2D7E21
+:10D13000B4F3A5F372DE9230AF0926A3EAF9CC9AD4
+:10D140005EF372DE9630AFC92E75FF4053DFF3BA3F
+:10D15000BEC8F88DF312FD6E2ABFB47EDA75DC5CB2
+:10D160006DEC07EEACFF6D332F6DDC3B6ABFB9DFB2
+:10D170009D2BB4DF0921BD5F2FF97CA9F43A076E1E
+:10D1800081BD68B5A0DDABA5975D5C7E4E067B8E4C
+:10D19000F69F95EC9B9C4ADB1305DF3DF5BBDB411D
+:10D1A000BE1C7EF68A0C90EB59A0E7109E2CAEB008
+:10D1B000BBCE857185EFF2FE549FB480BCD8BD9381
+:10D1C000BE97C2E695683FA5D531BFC24662C8CFBB
+:10D1D000C25E4A253689F9E3CCDEE9EF3BDAF1D7C6
+:10D1E00071FF73EE8A09E403CA87CF1B6C150AF836
+:10D1F000678F49680FCCADF2E992297D8C6B953031
+:10D200006E34F79E7F1B0D7265EC494F6794DE9F6D
+:10D210001BB67BE1B30DDDC417A67495A15B5A72F2
+:10D220001FBD3E7280DA3FBCBD14E8CDEAF380BF7B
+:10D23000510333A2E39CD53796D8406E7ED7EA03DC
+:10D24000B95933C3F70EAEF7AFD42AA1FDE6B3A5A3
+:10D2500093BDEDD30C1E6A67D47CC7530E764F4D39
+:10D2600087D9875713512C741D35D41E836B868143
+:10D270002866B85A8809AE65AB99FD9552EE37D449
+:10D28000D0EFD774FDEC0B786FA1127985D993613B
+:10D29000C45B4DD71B7F027B6DBECF6F0079316CB5
+:10D2A000A781D9A49C1E8677A8DB200F12DB25114D
+:10D2B000757BF46175FBC35406DF7D527818E06717
+:10D2C0001F5570E017877619515F1CD86F44FC2CEE
+:10D2D0003963D90EF1A7094BAC28D7CF3C6DC6787E
+:10D2E000D43EB9E35968879E4D42BFFA9577F795CA
+:10D2F00049B4BDF817C9323C7FF16B1DC21996A322
+:10D30000A7F7973C3B74FB3A7A7FC9E88E321BBD86
+:10D31000FFFC158474C373253C02D6F7FCDF743818
+:10D320007EEC29637807A587332FFCECD97BE9F7DE
+:10D33000CF3C95952A51BC5C05FA80F61BF75393B8
+:10D3400005FC8C71679E1908F262C94EA36A5D4F95
+:10D35000A7327B83223305E8ADBF78E289B53FC3AE
+:10D36000F78B4E1D437ADBA70FC91658FF5A465F4D
+:10D37000DAFEBB5399BE11F380F7F2297ECE7F6CA3
+:10D38000B913E2684336A9E13B34AC6EBF90CAF4EE
+:10D39000FB1C92703F1FC62B58E3023B753B417B41
+:10D3A000A6E8D4EF6FCF073BDAC8EC07ED3C0EA43C
+:10D3B00032BE7EFA693A0E930F3A663FD315537E1A
+:10D3C0005CC2E9F84589D9AFF4CFF22C4AB74B409B
+:10D3D000F117F4DC5FA2998718FF077C9D0EEE57CA
+:10D3E000C7DED4213E4EAFAA1D7D7270EFF97CB826
+:10D3F000AA716895BEA7BD60D3D2436EFA5EDD6E9A
+:10D4000027FA89E27EDD53AFA6DF41EF9FDDA978E1
+:10D41000C174AD9BF5E443E3A0DF53BA0E982F3CF3
+:10D42000F7D1F59EED782D05FA2DD86A1FA54BC0D2
+:10D43000C3C24DDF1B5A95200F2F971F04FFD671D3
+:10D44000FF766F79F7A42CA0EF4D9217BA2DE9B8AB
+:10D45000E5E61BC056D9AAF30EA6CFCB14E2D78DB2
+:10D4600042D77B065CEB763F7728933E0FEE1F5347
+:10D4700006EB5A27FBAF1F0EF4FF981EE3585AB86D
+:10D48000FC85E39BBE1F91E9FBEB6EB5D686AD38FC
+:10D49000EE41681F28DAA183387BCA292A9FD8FD6C
+:10D4A0006332E5C9535DF78F8078E23EBDB515E87C
+:10D4B0007C5F32C34368970EE53C89B0758CE3719D
+:10D4C000E325FFDD6E50E8F5D4A9D529158C8F50E2
+:10D4D000BE805076D0F5D5FE7438F2DDC24D6A3E7E
+:10D4E00011FDC47C1785D5CFB5F4919526E20DA426
+:10D4F0002891CEB4FDD2A6860CC057752BA83C4E01
+:10D50000B07FEA4EB619C06ED27E072C4022F0AA38
+:10D5100043FA241E5CAF99AD979AAC26BADED3F0DD
+:10D520002F16F796C02F5F2CE112C9922B489587D2
+:10D53000C273C974520DD77D52E4211D9767187FBD
+:10D54000DF9584F2ECAC2DFAE48F81FE9EC9F18662
+:10D55000E8A34C1E973BEB89A4A4D2EB79E00BA087
+:10D560003F1B6B2FEEA2F29CF2F7994F0C28D79B32
+:10D570003A5E4D017C9D7DD62CCB142F6776A75546
+:10D58000423CE76CC7AF53605DA73BD22A212ED740
+:10D590009FBCD1CA29A1CF8FC33FC7526598E6BBB4
+:10D5A0002A0DE4564B1A18E32423ADB1A4B10FFEA3
+:10D5B00017EF390C8D251E901BDFB57A77303811A7
+:10D5C0001F6D7F76386D07E05BC8A91A898D2FDE45
+:10D5D000BF318EC76F968FD5EB86621EE833E21996
+:10D5E00000F27A1A287AFADEE1570A0780BD20EEA7
+:10D5F000373AFD33D2E87D5765B74F0771C429C468
+:10D60000DB4CBB7EA0F3DE65A3F89A47A8FE826BD5
+:10D6100069C08071971627AE6FAE42220AA5F7B98E
+:10D62000A05F47601BF13577AB146EA6EB99B75E30
+:10D630000DAF05EDC61E3AA17F17112A608111B703
+:10D6400026F4A3E32F023D4AF1B0D844224974DC0A
+:10D65000C58FABDF5B4222389FBA672E1AFBC2C769
+:10D66000171C1F8D4E5F7D9A4A0EEA510E2E21FE29
+:10D670006BE0BB4B84BE7E8BE12B78CF3D43E75103
+:10D68000FBE3FC8A7B87CE4B837822F1811D41DA54
+:10D6900093918E975491480E9DD7922E29323CA596
+:10D6A000675CF24B89F96744C1F57FF116C3DFED82
+:10D6B000DCEE994F6F831D7115F8EF80EFCD12CE20
+:10D6C00063DC33522899FA49F34DD4C503F9C4D722
+:10D6D0000BFD07D0F6421242F83C9C968F785B44D3
+:10D6E000BA0D8C7FC2CDE9F4BB0DA7A84C2297429E
+:10D6F000076311DF9F132FE2FBDFE3745086F421F1
+:10D70000EE53FB8698537BBF0F78F325C0B976ABF9
+:10D71000BA4D1E4F6817005E683B015F0D7B2E1AE5
+:10D720007D7DE0E991B87E0B0F9D363C913F98FDE1
+:10D73000FC3EC7E323B72C70833C7A18ECC94C3EFF
+:10D740004039C86F22E22311131DDF329AA8E22567
+:10D75000D44EC3F62FD2FEEBBA4DD9846CD4073029
+:10D76000EF3057E73F0429B281E9815F01DDCF95B2
+:10D770007DB90AC2D557887EF30A460F8F8E6A1C80
+:10D78000DAD887BF2CE6BF51EA88C8209F5E60F6D2
+:10D790004672694C1F48E0F737D3981D33E040F4D8
+:10D7A0005016D0DF7312C6F7374BA445A2707651DE
+:10D7B0003C835EDA2C1D3F047A6CF3751ED24C9FBD
+:10D7C00097EE99B6F435F4B92D5EC897D4EFA9D089
+:10D7D000D55B71FDCCEE4D6ADC2ED3E71977168D43
+:10D7E000023EA3EBBE733ABDFFDB340FC2CD6D65C5
+:10D7F000F4E35A1DCA5F06F1DD03FEA5AF01DD0D9E
+:10D80000B7601C2D83C22A3915AFAD60CFBA4893DB
+:10D8100004FDD63825C4C79A1A32F397C548CDCA35
+:10D820008054763D46AF92425A202E9CA150FB98E0
+:10D83000DD6F81EF3C92C2E6E59475774E03FB7C89
+:10D84000146BA7AE947C3B508F6D403864184935FB
+:10D85000AC1BEE833D4FA7E1DB8DCFC338EF8C09C6
+:10D860008D25308F8C81ECEA3044B2619C23824E4E
+:10D87000BADC32E88DE55CFF2FDF5D91914ADF3F36
+:10D8800072D6A4803C3FE212F668C40AF628195406
+:10D89000C4FA733DBBBC64420630B52357DDEFBC10
+:10D8A000DE376034E8ABA33ACC1BFDD1EA1B60A79E
+:10D8B000FDAE32B07568F1AF7330BC06BF92483828
+:10D8C00021FE109C7901EDFCE0578AEAFED955262D
+:10D8D000124E883FD4D51E9804FDEA49F71AA0C716
+:10D8E000FA8E24124EE08FAB2C7D7F57F045F02B43
+:10D8F0001D098D46B2CF8638E9117D6CCD7CA0C361
+:10D90000FD12C6B382D4AF0F25CEEBAB34124AEB77
+:10D910006B9EE9EAFB743DAA76E797D88F9447534C
+:10D92000E03BE76CD1143B5F1FF413FAF77C580E11
+:10D93000E947629E92E96188335999FE9A06F85543
+:10D940006229D3937BC615CF61BCD484759E9B6935
+:10D950002011C44B0CBF0B700B0D21644BD7A706D5
+:10D960000FD8235DAF20DC04BD24C22F9498B76A82
+:10D97000EE8EC854565CDD9EB3AED84C517580CB4C
+:10D980008550DE3ADF78FA5C27ABE44452695C6E7E
+:10D99000A0987A04B2681857F5AC83386BBCCDFBFD
+:10D9A000C7DF0FE54FA9A2E39516B3F727B717FC1A
+:10D9B0009FD5A003491BD3CF4A2CD79F9CD0366953
+:10D9C000DA56DA1E9ED0B6699E3B34CF5D9A763623
+:10D9D000EB7F363992ABF31232BDBD708A42E5D689
+:10D9E00059776436F5A8C97ADDD02955B45D5FCA88
+:10D9F000F47A4397E44535C5E1D7E06576ABD51BAE
+:10DA000035CC2D0638741F02B952D729D924CA073C
+:10DA1000D68EDD116CC37B9E84F73A247CAFAEE3D7
+:10DA200038BED7EFF84532F2F9BAA213AC5FC74758
+:10DA3000683FAC69A9C1FCBEC85FEB88DF9725F5DC
+:10DA4000E4AF857C3DE7F6BD2A33BAB625FA7341CB
+:10DA50001837216E24FABF37BCEB6D304F92967F9A
+:10DA6000DA04F6F47FD77F3406ECCBF7B81ED9285A
+:10DA70008587C277B790C050D0A3DFAD1FFC8A4C1A
+:10DA8000FBBDAF8F6E831CDD86F66B107EEF2747E4
+:10DA900073242A637EE4B88EB59DD16D00CF8F1DAF
+:10DAA00053A628749CF773A239326D3FDABE9CB539
+:10DAB0000747B741FB654780F51F1ECDD1D9C0553B
+:10DAC000AB9952459F3F61EB9B9F5BB91C11F333B0
+:10DAD0000FF4353BC07EAC63FA671BB57F4D545ED7
+:10DAE000CE5E7C7AD713140EB3BF9F8472EC89B3D9
+:10DAF000374F61FE41C8AF9441FC97FD41FD8872EC
+:10DB00005E41FBC20D3A31B5071FC9B9DD1ED41FF6
+:10DB10005734EE06BB25637631EA8FB169BED3F088
+:10DB20005D71FD4526BB9E76D8985CD6C9980FCF0F
+:10DB3000B83719EDBA87CD6C3D946F10BF568E8FF4
+:10DB40006D0E66976E7330FF7649DAC4D30E7A7D18
+:10DB500057F26D3651B8BFAB272133C8D94516B43B
+:10DB600097EED84EE50695DBED7CDEED1BDC61C85B
+:10DB7000E7DF21113FC815213FDAED3E776A825F6A
+:10DB8000D45E42DBD61E3FB87D9ACF6D71C0355D45
+:10DB900086BC8F904BEDF9EC3DA18F329AD977324C
+:10DBA0001E1EBA03D691A4B0F8D5FC99853B9AD035
+:10DBB0001E988EF3253E9F1BE220271715C810D70D
+:10DBC00012F8B962A06F2FC0E5769E17107812F890
+:10DBD0003CCDD73D5747ED09BADEBF380308476A49
+:10DBE0005F8CE0F133B42F4E836E4F802F51A263D0
+:10DBF000E0FEFF4770FA3D3CFF47E154BF82CA0B8D
+:10DC0000F912E40587DF4629A2CF60F202FD79B858
+:10DC10000F7AA7332D1083F1C5F767DF5B8FF6A46A
+:10DC20009857D2DD7BAB6F23BDF94C6BEFFD19F03C
+:10DC3000E5ECB14BBD220ECABFF3FEBB26CC7BBCCC
+:10DC40006FE840B9F93EF5A39A40BEF0BC7DD9F724
+:10DC5000971C017F548C1B70EA70BCB592CF0DEB02
+:10DC60005B4BF16E82F94F33A0BF21F46ABB3DBC20
+:10DC700019EA26DA6FC9C6BA89F384D5A78456246F
+:10DC800061BFABE41304E2AAB1B136CC9B533AC1F5
+:10DC9000E7EDB30AB17E85D243C80CCF293D419D43
+:10DCA0005F7B095D108C37EB0A7C0EFE3AFAD9B324
+:10DCB0004C385E1F74C2E2D443587D467B3EA7C3F6
+:10DCC00045054887E9CD2C1E4A14DF8869097A7E0C
+:10DCD000BC93E139A934FADC7F01CDAF37A33D0B0A
+:10DCE0003A16734A6D19381EC5FF60278B4B209D6D
+:10DCF000CD7B2899D7C379CB00AE0F2433BADC6A29
+:10DD000066F9AEADD47E46B9C8E957D4E105B89DF1
+:10DD100017AD9553C05E18ED8CC73B7C107FC07863
+:10DD20003B7D3E272A1D07BF6F4E481731425CB826
+:10DD300075A22F9AE0BFC01FC817DEC9E52AD944D3
+:10DD4000D0BFBA13DE4B81F12D29901FBD13DE0722
+:10DD5000FF71E544551E7022C8F0313DF3D3CAFD72
+:10DD6000894E1EDF6C7BD497F81D31BE763CEAC726
+:10DD70004E723A11CE9101E04734E9108FDA7946BC
+:10DD800037B1B87974531ED29D18AFBF79FE8F2E6C
+:10DD9000F63D89EAC10513987F2FFC9EF9DCFF262A
+:10DDA0002BD57E1DC479E26D5DEFB6D64F84FCBEE7
+:10DDB000BA3FB35B928A6306CCFB7824D5FC05BCE2
+:10DDC000FA83439DC0E725C24DE8BD47CD549E521E
+:10DDD0007AD904759094BE36DD93847ACC61080FAD
+:10DDE00005BADA02F535A84F99FFFEF91175FC4521
+:10DDF0008BBF1FC4E9EAF2FCEE26C0B9B3B7DF1D42
+:10DE0000B4C41E03F8072D8C2FCFED4F46BE2283DE
+:10DE1000A2B3A1EEEDFC3E23017E6890A2852027EF
+:10DE2000CE49BE1AECD794E401FEFC406671812015
+:10DE30006084AE3318FA0BD65B053BD57EF839FA11
+:10DE4000B796F2CF39395A06E308F902F204EDAC7D
+:10DE50005A96876A904908FCB4ABE4398BD09E98F7
+:10DE6000954976E0FDE385E09709BD41FB1D94529D
+:10DE7000191902FFD5717C34C827B05F1DD44D013C
+:10DE80005EC05F83781F3C4C885337AC3F83755B23
+:10DE90000D7BD47453D74357D24509DE4BA033943E
+:10DEA0000B218423DAED2047AA581E3D99B793AA87
+:10DEB000BBB18E2BC8E32FCE03D149209F924B3BA1
+:10DEC000C81C7A0D9E6276CBB8AEEDAF825F6EAFA6
+:10DED000EECE01760AF278A7A01B31CFB15D1B749C
+:10DEE000E0370A7B27C16F1D3A5D15B7588DEF816A
+:10DEF0001F0CDF8BC22D379015D3931BB99E4C029C
+:10DF0000871AF469DB10D4A7A0EF40CE093F1AE4CA
+:10DF10001ED0D5C0F4CA23C0F72FA657BEEE74B2E8
+:10DF2000EFA17F00CED7D8FEE94EC047F4037FFAB9
+:10DF30009BE3905C7E13167F5CF686F31BE9FFFD86
+:10DF40004BA6FFA11940E7CB244F06D0F9F138FDCD
+:10DF50001762BE52DCFF5017C038A388772D82F8B5
+:10DF60001EBDD67139B480C7C71688B8D826755E6D
+:10DF700015E2D189EDC5224EB6D3D8536F04F2A372
+:10DF80008A4492E978F51067836B87FABD061263BD
+:10DF90007CD479D1A8CADBB63338DEC9E9C95E15AD
+:10DFA000D681FCDA6C66F13221D7C6ADDC8E7432D4
+:10DFB00060942FFF7EE09B37F4186FF903A70301ED
+:10DFC000974667E551C0A745C7E381F71B519E9F60
+:10DFD000A476C26E1EE7990EFEF1AAC050A897273C
+:10DFE0008A2D37D17F16D775FBCCB5687FA7CB2A92
+:10DFF0007A7DDEC9EA9B30FE85FA2209FD012ADE20
+:10E000004600BD9615087D4D4640DCEDB89EC5CD59
+:10E010001B6EB50660BCA8CCE4A13B9DE929773A0C
+:10E02000AB5714EDB8FFC9E951E443210E95988F21
+:10E03000F0C4FB6FE075C804D7BB7111AF778FF3E5
+:10E04000858CF22DA9D88F7AE12AB912E55BEC63B1
+:10E05000AB07E0527DA66E11ACE3B399160279C905
+:10E06000793C1EEE4DB7E3B8228E7DB9F1F0D1E9CF
+:10E07000717A54C5C3F771B9B88FB0F9865A8C2C30
+:10E080008FC1E7BFEFD41561CE1F21909BB1DD6634
+:10E09000A68FA99D0CF27ADF9E216158CF713DB306
+:10E0A0006742FB93F9FB81CD10A7D9F74BA717EA7D
+:10E0B000A0828B4F8F00FB76DFA9A77FF51BB8BF2F
+:10E0C000DFE8057F741FCF63D419228568CFF3FA88
+:10E0D000CFBA944821C4A55EE4F8AAB3D036BD7F78
+:10E0E00083293035DDD9936F84F7E0FE8930F31B47
+:10E0F0004E104607A1F52C2F4CE1EB8679C4D6666D
+:10E1000060BE12D60578F860FF709CF7463DEFFFC1
+:10E1100020B32F4FF0F689174AB01EF2BCDF80F50E
+:10E12000CBC187993D3B57F63CB60264EF4B49188B
+:10E13000079DDF7E14F347C187164E85E7C1C52BC7
+:10E140006F24DF9057013D9518C73F4762B9E8A794
+:10E15000D7167444E877CF750DF5B2F4A80B937118
+:10E160000DBC4EF624852FCC3BB65F8FF0BFD4F1AB
+:10E1700031A059C6F4257C279898BF42FDA2CE67EE
+:10E180007D5BFB9C3E5A780FFDFEDAD4C00FD213A4
+:10E19000ECD8E04B6E94A31F3CF8652EDA3B6D2C57
+:10E1A0006F7252EF9B0D7C62AF8A18E624C8D78D40
+:10E1B0009C8FE71AB95D4BE56022DF8BE765956AB6
+:10E1C0003E13D747D2995C4EE6F512BD9F8B7ABCC1
+:10E1D0009B8DA08F59C80BC6F5E0FD3C9EC71C77F0
+:10E1E0002AF60AD49DD57594609E346F6504F99221
+:10E1F000C23B02FEC9C9CDC94C9ED065C2380BCA0C
+:10E2000009DAD50B74ACFE638191DAE9CC2EC0FE3D
+:10E210001F6ECE403894AD66F669EC3909E5A2C8A8
+:10E22000E7D610F6FEDE96E3211DED5FB3532AA17B
+:10E23000A295D4B454607DC8E2ADF988FF715CFE4C
+:10E24000CE35FA0A3703BDED4D467AA3DF437FA0F2
+:10E250000E6AE046A15C32807EADDD29617E44AC71
+:10E260005F9B3F256175DE695C0793DFA03748A29D
+:10E27000DDC9F510E80BA2B16FD57411BA247DAADF
+:10E28000D50787E372F2F2F4E9AF417E8DE9AD4F35
+:10E29000A9BF70249DD10993FFBB59BEA99E34B27A
+:10E2A0007C1BD767F175717DF8A18EE9DF05C60D7E
+:10E2B000783D9E9E8FF35A4CA23CEF1433C0FCFA7B
+:10E2C000A3AFE3FDD097A0AB139CCEEA4E91C8D587
+:10E2D000F47B752B49A47E04BB268F40FDCEF4BC95
+:10E2E00089E979B85A2E41DF6BF5BC56AF6BF579E9
+:10E2F0008681E96D414F89F907B093C6AD0CEB58A3
+:10E300009C39DB86FBEB387E97A4F92E668EE9B14B
+:10E310000383C74C26CF4868FB498115E26715EB9C
+:10E32000B2212F40F500F06F1285D376888B71FFF4
+:10E33000E3EE6CB67E17AF93D22B7E5262053C752E
+:10E3400063BC20E624E8BF0BF86E4BA6EF8D82F786
+:10E35000185FC7DF3791164BC2FB95FBCCA8972EF1
+:10E36000BC908C753D54CFE4D9E978E9EF51BF8179
+:10E37000B6CFED4B463BE11CD71B0E1197216B101E
+:10E38000BFCE0C86E710A9CC82F83691A66481A88E
+:10E3900015F66CBDBDBF7C047F9EDF7D2BA33323B0
+:10E3A000EAEB0BF6E85DD0A6F3C13AECE40C36EFED
+:10E3B000E09E0925F742FD85DFEA65500D9480FD5A
+:10E3C00061D42DBF15E25E93742B63F7D075D4E74B
+:10E3D00058B1BEBB2AEFF7BF9B45DB1FEFD113231C
+:10E3E000E0FD899B0744E035C5E7EA8B4F1685F5CC
+:10E3F000AAFD834B76AADBF51DEA769024EC2FA4C8
+:10E400002058F1FB926B0E26D0495946B2E3C36106
+:10E41000C096C40BF5E944F79D01813EE4AEB87E99
+:10E42000B9CA7BCD413DD6F75D9DC1F8D900F6D183
+:10E430001CA0873EDEFB23E77BA3B1F114EC133075
+:10E44000BE68F436D1B7CC198149F07E831C3B04F9
+:10E45000F834E69D1D01FAB432EFAF9827BC701F67
+:10E46000F1027C2E982BD04EBAB0D9EC017FB13D91
+:10E47000D7CAE2322F496189F91553C750F95A8B2F
+:10E4800053A1EBDD74DDC76C530B31C9885FEA55CE
+:10E49000B9405EF9D0CFFB709AC5B69ABE57BB891A
+:10E4A000E9ED3AD29D0272E087803FA06BDD330632
+:10E4B00013FD677E8B6F68139DEF12BF05F733293D
+:10E4C0005F2B7EA0AF0760C804BF644E069307F5BC
+:10E4D000A6A8A102BEFFD779D5CE829E389E41CF95
+:10E4E000E2784A6749248BBEBA70C55CF4BFE2F992
+:10E4F000FACDAC8E6CE13D3578FFD5CD465CDF873B
+:10E50000FB25A4F30FB7B1F52FDC64F640BDFBB5D6
+:10E5100076E6BF2FA4EFF5BDFEC91FC3BA3EDA7A77
+:10E52000B717F2101F11F69D908DC5DB3EB2B1BA40
+:10E5300002E80BE37CB46720DA43B59B164DC5FABD
+:10E54000BE6D3A2FD823647F32C6B1166EFBDE6FE4
+:10E55000C6429C6CFAEDA500876BEDCBD3212E440F
+:10E56000FBF9C3CCBE6675D3A9E54F021F5EFBF570
+:10E5700084EE6BC1EEDA46F9249FED4B007BFFE0A1
+:10E58000B6C968DF2E9C66B1C3BA3C5B9F98047A1B
+:10E59000E8A3699932AE6797446C0007FB8A74B8A8
+:10E5A000BF5052FC7DD1537E860EE15A9167F546ED
+:10E5B000E0BDB775482794AF6E053D5CBF4D8FF643
+:10E5C000F3C1E9EFFE6E96A387AF16EADA6E1D97E8
+:10E5D000603F05B7DE20E88444CAC02F6330D1F223
+:10E5E00097316F6521CC47CB670B573716B2BCDC30
+:10E5F000E5F11BD9CAF8EDF10C89C56F2E9DDF7EC0
+:10E600007E39FC46B25355FAB7B75C0B613F91D7E0
+:10E61000307989EF092BE6AF7D1295BB6F6528F83D
+:10E62000FCAD0CBE8FEB4FCB76BE49E1332B23B054
+:10E630003F03EC28E22B013AF2C46C95B047CBCAF9
+:10E64000ED41B295D9DFE02700BE373AC993EB120E
+:10E65000E221DD196C1F21E5FF4330CEB977FE7A48
+:10E6600008F0D3907B7604CBEBFE11F3A0D62E9668
+:10E670003FB77A635857A077F891FE845C0F7A9978
+:10E68000DED1AE2BC3C5FCC2A02386E37CE6627C50
+:10E6900028F20A5B5658301EBCC51136B37847883D
+:10E6A000805E9A5AAE63F93F6EAFDDC0E3ACA6D28E
+:10E6B0005709E4FDC878566FF766E9AB4A1A6DFF53
+:10E6C000A67CA217F73996FEB4B500D63D5ECF9F63
+:10E6D0000F0CC1BAFFC35781CF97B9741EE0EBA9E5
+:10E6E000A5AC6E94D4A6601CE7CDD20F1CF312E645
+:10E6F000EF27268F95D2C974EA2C25D639DE38DE6D
+:10E70000ECB126D0D7676D5235B39B3D03660C67DD
+:10E71000711AD4C3A56A782C7319F0BB2FA6577C45
+:10E720000A70BEF61A868FD3BB8C61907FA7F9BEA4
+:10E73000A15E74E1E2F4F39D22551D82C3D0910BDA
+:10E74000FAF18CA47E6F71AB0EEB0016B54A244C27
+:10E75000BF77FAA9BDB920C73F7E626FEE9C84F9EE
+:10E7600068DF13578BF81E8F776AE3D7FDC5AD4579
+:10E77000BFF39B48C034B0A7FFF9DA3F63DC7A4EA1
+:10E78000178F7BFB7C831CE04FF1FEDAF146BB194F
+:10E790007D489D12C64D44DCF6C4E19F4286288E1A
+:10E7A0003F7357BE9C58272AAEE338DE6E06BCD1B5
+:10E7B000A5985B59BB3F7CF5C78FFFC1F58FC0DBC8
+:10E7C00089D68103008E8606AB42D8FEBD22B0F703
+:10E7D000B7118B17F8C990E9B282FC12E71F7C6968
+:10E7E000665787855EA9BD96935984EFDD2DFBB1F1
+:10E7F0001EF14BB90DF76FDEAD6BC43AF73217FB64
+:10E800005EB6CDBF7B01FA391D58F74E5AD5F04D93
+:10E810000728809EAA31A09E1270BE6ACE5DE8EFE6
+:10E82000F6819F4D403799E5EC5ED095CFEDE52818
+:10E83000E643CCE5C4067181E6B1219C8FC04F90C0
+:10E8400075275297847632D4EF24A562DE37C4AFA1
+:10E85000C49A4AE2799024EE1F134DDE838AAD10EC
+:10E86000F413F304310675400FDB3BDA0A59DE1866
+:10E87000ED4F1817EECF2956306F00FD0CA3BE9D4B
+:10E88000DEE274C9EB3BA78AFBB5963EF32C5361DD
+:10E890009F14ED9F43F520D87FC4AB57ED93DA4A20
+:10E8A000ED66F0EB441E5B277794B8D00FE98E42FB
+:10E8B0009CC55066F2805E4DD2751401DEB4796D50
+:10E8C000DA2F9FD55364DB41AF887D500D2B26F89E
+:10E8D000619F41DCCED8CFFCA3867B2AF0FE842E3C
+:10E8E000962708B61A711F67B053C2BC5C83DF104D
+:10E8F00036613CC4D304F80A513B0CFCCF763BABE9
+:10E90000036BBFCEE60D91C4B87AF4B17B31AE6E25
+:10E91000C57CE4DF9BA73D9F4C013032210F37C0FF
+:10E92000C4EB0D59DC3D9DD393C0BFE06791D74D3B
+:10E930002EF6E783C5FDE5C6D0AF2DCECBA87F214F
+:10E94000B73DF88DF52FE4A31BA0FEC504D63C7F90
+:10E950000ED3A27A33BEAFD1ECC1FC5DFC399C472B
+:10E9600061EA94F8FBED374C1C8475BBBC9E66D6FF
+:10E970007AA8C37FD84C54DF4B9C9FA2195F4FC726
+:10E98000B77A44FF7BAF9FA8601E9BB7DFFD21D401
+:10E99000FB3CAC578F872428F6619A7ABEB72E6B62
+:10E9A000C883EBC7F7E86FAACFF7BAC6F4E8F10758
+:10E9B000DE9DDA36D203FCF539D6410B7D1C74B0EE
+:10E9C0007A18ADDC3AE09284FD3B0954EC9A993513
+:10E9D000787E433C8FDD35CD07E758883C7670A5BF
+:10E9E0001FEBA141FFBB50FF9FFDF01580D2F4D378
+:10E9F00068FF07BF52585C89DA1112A543535705C7
+:10EA0000C64FA13C17F4A6C0FF62AE97C05607FAE6
+:10EA10000E6EBDED091D7D9EEBF6FD078ECBFD4014
+:10EA2000ED7C4FB9D8BE816051E5669007E47189ED
+:10EA300080DE5E57F419DA190D2F4C1C9358CFBFA6
+:10EA4000A8F311560FBE53DFE7FA4FB9983DDAF03D
+:10EA5000C27318173D1D66DB886A95F0DA71109F46
+:10EA6000A995C1D222A5E19A59A8FF67D275D075A0
+:10EA7000FD86DB25C19D3787607F4190FE05906D47
+:10EA8000F12F407B7FCB4C9315F248C1A2394B91BB
+:10EA90001F6C161FAC5F3BCF781EFC1E0BC62DD71C
+:10EAA00075EAABC16E2AA376D2AFE87C7352A75445
+:10EAB0007BA95CCAD2ED2EF9372BD40FF4AD87D7E2
+:10EAC00067323DDC22F943379562BD2749AC47CA1E
+:10EAD000EB64F6D84597411587BFE86276E2F850B7
+:10EAE000F704A0B997946812D8C541E2FB14FC5C06
+:10EAF000E2B77A601C380103EC2CC72A0FC6854D9B
+:10EB00008EE80F47A2DDA4A09F21FC88732FB038A8
+:10EB1000DA5277C0EA86F88E2EFAA39B006E3F6425
+:10EB2000FBAB89C2E44DEECDD65110F7323BA23F8C
+:10EB3000AAF6601D11C61F065CDD827878C9416C9B
+:10EB4000009F09A11A454AD033426E4C88EF637288
+:10EB500060BCB5928B97C1145B1F9A90445B2EA644
+:10EB6000F5D80587FF3A43819BC25E904D01F4675B
+:10EB7000AA6652FF10E8724DEC900CF17D4737DA2F
+:10EB80008BF51D127EA7BEE89758E7B784D793C5CB
+:10EB9000EBBA9428D6B915BA93785CAC85D103E961
+:10EBA00046FF973CC3E04FF526D6BFF5D8ED4DACF8
+:10EBB000EE888F67E079897A1EAFA180C2E7256E63
+:10EBC000116F5BCDF5AFA8D763DF258AA72C31BEC7
+:10EBD000B0711AD524382F4F0ACCB7D3EC1FE7A653
+:10EBE000EF9FA895595CBC35290C9B72374ADD3ED6
+:10EBF000885F864AFADE7F7413FFEE8003B149987E
+:10EC00003778A1BF7A6056FFBB79CC1558875FDA99
+:10EC1000F9E924A00F524D901FA9BCB8A47AE019BD
+:10EC2000800FE7FF43F5C05EC9B7835EE7BBEDEA3F
+:10EC30007A602FC397C8AB6AEB80CFB9230AABDBEE
+:10EC40008B3EF604E8DD4E23D6034EED7CFD18C462
+:10EC50002FA79A4807E69935F6C3C9B49B1B004F06
+:10EC6000E73FF9F0B1FB09D4913FEF65F5856A7B89
+:10EC7000A03FFB1F7323097E6248D0CD3FC9FE171A
+:10EC8000F23AC8FDA93352ECA14258DF7E9DADAFE8
+:10EC9000FD480FBA45DEB59F7A96AEBEEB5944DC0F
+:10ECA000B93A9AAFCA733D1AE783CBCB9B6D819C6F
+:10ECB000761F793385D7A92912131D24C7A0CA9BB3
+:10ECC00029F6C2FEF266117CFEDC107CFE40AFBC71
+:10ECD00019AB7768D99FE101FBBECE197BF2490FD2
+:10ECE0008C67C0715A5E480A433D7F0B877FDDA564
+:10ECF000E7CD7EE5EE236FB69DDB6F1F14C91103D0
+:10ED000085EB76C2E61FEA12F93319FDD8D88339AC
+:10ED100062FEF8FCFC83C3305E3457E4C55E62716A
+:10ED2000B4B93CFFF5C1F442AC67EB0FCE735BD5D1
+:10ED3000F985D7389C2F982B301E7FD7BF4FC3F84B
+:10ED4000D40288E30F84B8561B8FCBB3789EA79567
+:10ED50009D2BE0D929853D2C3F6392D136B4C970F3
+:10ED60007F0915A35B40F48628D55C496F4B146A74
+:10ED7000F4B9A785B6A9D1AFAC55422EDA6FFBB175
+:10ED8000248C9F3DE0F0E07C1F686179EAD07A290D
+:10ED90003C988D8BE7B5855A641F8CF30737D3F306
+:10EDA0005FBB0D7D9E0FD1A2E7F910FEBD26224765
+:10EDB000E02A4BECFA804DA9EECB7E10E3B5E81BC0
+:10EDC0004D1500EF1C762ECC05836F26C697530B8E
+:10EDD000F1FCA796E4C6D66AF61C79F68239E6C736
+:10EDE000E7572BCC20259E5498EF7B6E9E5FD3C0B7
+:10EDF000797E9BBAADCD1369F7BBCD258121EE811C
+:10EE0000BDF783BDC7F5DF8575F91C2F5ECC97B4C0
+:10EE1000E83DBFCD077A5FCBCE776ACA6670937341
+:10EE2000D8B5C05E85E7F0113BB7E3089B7FC1D53D
+:10EE30000E09F8A1C5CEE8F61F9DB776BEFACC4202
+:10EE4000065F3BE3D796B55298C18BCDFB52E322C8
+:10EE50000333FFB972F103C9FB64241FDF43B91008
+:10EE60007A508F7C778284B3587DA80DE5E61CEE3E
+:10EE7000E716677AF0FB5B6A0B52209F3AF7D41AC9
+:10EE80003CA769C2CD569C7FC34B66F4E3EA574664
+:10EE900073819EB57084D92A429ED2E7731C849DEB
+:10EEA000EFD3AACE0F6AF3BE6B53FDE3201FD450FD
+:10EEB000192D84BCD123F207BB5F67720DF56AC3BD
+:10EEC000CAD8931067FE6E6AA002FA9DBDE7DD49BD
+:10EED00092075F47F9767EFF10DCD739A745BDBFA3
+:10EEE0008DAC57E71F496B2AC6D549BBFA3EECC328
+:10EEF00052BDD72B1FC9EC9A8D86C050B03BAFBD19
+:10EF000086D55B7CB2482680CF4FCC84E7F9859CC0
+:10EF1000F51626EA81D9FDE295F60338F3FA57D1C2
+:10EF2000BF1EF04AF159C7F1FAC9735716025ECFF6
+:10EF3000EEBEB210F0BA51DFE603BE18981E980379
+:10EF4000F03839D18F76A1A8F7BD547A5B9AC9F50C
+:10EF5000E0BF480FFF407CFF32F530FC498C97BC86
+:10EF6000F45756971BEA62FB827BE274A7F17CB3ED
+:10EF7000F35FC912C8E1FEC6B371FBCE652221B0B2
+:10EF8000BFCA2AA3F85ED99F650276A0B07FB5F309
+:10EF9000DFC0F1BA23D377C105F8E571DD5A3EB67B
+:10EFA00029FC39B3B31F97306E6BF28452C6A15F50
+:10EFB000357FB40EE5CAAF70BF07E9926CE09F2CB5
+:10EFC0007ABC099F9FEB9C8BCF655324027E583DF2
+:10EFD0007D0EED35E3D5F5DBFA3D259144BF97CEA7
+:10EFE000E333F04B931C3103D06703D8D5748A0DFB
+:10EFF0000A8B6F373808C6554A3BD57EA2C8DB6EF0
+:10F00000F1B3F373B67449788E56BA21909F0D7898
+:10F01000D5E46F7F91E93B96E9ECC9BF373A7DBBF8
+:10F02000810E1D06928BF57A7AB11F51BD8FB3BF49
+:10F030003AB897057F7CABFD340BEDA42F881FED0C
+:10F04000A403107BC0BCFDAD685789FBBDEBE0C2DB
+:10F05000AA7CFD02BEDF7601DF6F0BF23EA291F7C4
+:10F0600089EDBA843AB8485FF50C09757089EF25C7
+:10F07000D6C1455472B28DEF07598679F220E59BCF
+:10F0800015A37AE8BA8EF03F9B621FE07EA09D46F2
+:10F090008CCFD5F1FADC60ED09F47B82B0BF88F14A
+:10F0A00037AB63E7E755D4517F12EB943BD475BC83
+:10F0B000E7FFC9FA45F4EB2FEEFE670D7F8B7589EC
+:10F0C00075D475498C1F35F3D4FAD1DAF8B9F083C9
+:10F0D0002F55CEA564FD6BE55C5696A0EF7F4CCE18
+:10F0E000F5CA430C8AA578FF0979888F3D6DE91030
+:10F0F0009A6C9518BD4ED2597D2CCFA9637510DA44
+:10F10000FCAF6712E63545DCD7F4BC2EBC3A1FFBDA
+:10F11000635EB77E7F32D625D47A6AD16ED7E63B5E
+:10F120001793DD9300055F9023B88FED1FAD2FA8D7
+:10F13000CC8AD717E45F667DC175599791EF7CD56E
+:10F14000FA795A20814E2A8BA90350DC7F1DD96D94
+:10F150009CEE92781D8A4909117BC2FBFDBD776741
+:10F16000168B1FBECAEB9F1E4E4EC2F3175C06B62F
+:10F170006FC325B33AAD5CB7BF266B0CE81586C7E5
+:10F180009FBC701B81BAC79FE83BF03C8450BDD543
+:10F190000BFA50C4ADC4F8BFE2F1D44BE59FBBFEFF
+:10F1A000C9FCF36D722324BE77A9F9BA4D14060980
+:10F1B0007CA5E583FEDEEB4FAE6CC8F2AFCF42B963
+:10F1C000E51B81798F4B944749A5545E83BEDF636D
+:10F1D000F480FF61E2FB8BC87AB7CA7F9FFB700E99
+:10F1E000EAC34FCCCC1F11FBA0C4FA1FEF17DE7F80
+:10F1F0009FBDF817A7FF4958CFC90A1FEE7B78209B
+:10F2000099E995D853ACCE48BB1F48AB4FC47E1686
+:10F21000F1BD4E21CFFE45F2F4B57F923CA5FA1523
+:10F22000ED8D7EF3BABDDE0FE177CB2ABB7D3CDFEF
+:10F2300085FB39C4BC82DDAC3EEF6D8E3F71FF595A
+:10F24000AE7733B37DBF033C9C7DC764823C6A6963
+:10F2500029939F0D7E2BE6211A3A585D4EC34A82B0
+:10F260007103B1EF775646200A72EA8177AD787E56
+:10F270006C43E7F6D602AC5708A09D78EE1D76DF0A
+:10F280009C113809E307574655F98EB28B9FAFA9F9
+:10F290002EC5F9A2DFEF30AAF75319B2993F2FAE6E
+:10F2A000BA6CA1B7A99F43DF3B5BCBEACA830E9F31
+:10F2B000AD02EB14583C3DC9D38D71F0863DA824B6
+:10F2C0000816B9C2F37BB3916E1AF65494E0F90BA9
+:10F2D0001DE6123C47E83D2BFA6B67EFC90C433C37
+:10F2E0007BA93BF017986F7269F83AB057F3E8774B
+:10F2F000209E7E76F77525185FD4F09DE0B7F83E26
+:10F30000DA3B4CE166A9871F37EA997E147AED0C47
+:10F3100018C74ECC7BB03AC3AE6964BEB5A76D7555
+:10F32000A8EB2F77644E3C03703E93A5F03C39CB9D
+:10F33000CBE79BA8375BD09B0EF3795E7E1AAFA715
+:10F340002021534F1D45C1B7E7E5C5FC445BE4E50B
+:10F3500093BE62767381CD807491DCCAE406A17499
+:10F3600001F6FAF858F704D8BF36A83D321EE0354A
+:10F3700000C00F312E12FDE148C87FA429E321FF10
+:10F38000F1D88A51074C0E8847755F0DA8F1B4D9A2
+:10F390002AC1559D95E12F82FA4AA2341601FD57E4
+:10F3A000BEAD67758F6B9350DFB7E7D661DDE3B90C
+:10F3B000778DAA7D46BDE43459ED82B85341EB7F89
+:10F3C00062FE21798FD4673DEB427022C6B0FE10F9
+:10F3D000C74A6EED0E95435CE641899DC149672F92
+:10F3E000B9209EA0C86077CCED64FBDFE7B6D92BCF
+:10F3F0004D284F2596BF19EF4039A9ACBD5E067F59
+:10F400004F692278DEDDEC6C76DEEDE0769B0C78E1
+:10F410007FF96B5D9F79B91BB27BEAE8005CF5C6AA
+:10F42000D821281D10F944513F27FCABB87CE5E7F3
+:10F43000C20B7DA4B5637BD9AF5C1FC5ED780D1DF4
+:10F44000F7F79EA06F41CF2FEB09DA612F4B26DC37
+:10F45000C726E8BA45EC2BF89AC585F3787DCE89A6
+:10F46000757F19C1CE8114F99830ABABD247D76400
+:10F4700021BCA2D78460DD7BEC724331C6D31A7005
+:10F480009CB5ECDCBABCD681ABCB4BE16A230082E5
+:10F4900013FB96E4015F86281D0CEE830E8AB35998
+:10F4A0001D94B23609F1A66CC013BA89624F47BCED
+:10F4B000298F30FC1466333A17F96011F7CCCC0E63
+:10F4C000ACCC1E93B0FF6C8585ED3FE3FBA4935756
+:10F4D000BCBB0BF6753DC6E3CF075E1A86BF9F71B6
+:10F4E00061AD22411CEA82BD260FFCBD07385E9348
+:10F4F000956E62B326D2E701ACBF2DD8CFEA0815CE
+:10F500007E0E96B2D6B11DE039362D8075C657B73E
+:10F5100044F0A7275EB29DC43C1FB58B70DFF8E9AD
+:10F5200017246117A9F4A1F0D7B47ED88FB3FF7761
+:10F53000FDAB27E372FA32FD2BA2F633E3FD85DF44
+:10F54000A8F52334EFF767FF105F485567F302C74C
+:10F55000BBD0EF995C368AFA9BF8BE6F1236C3FEB9
+:10F560008CC9504BCBD68375489B248B17EC246DEC
+:10F57000FD51BC2E88340E6175298D23D9791E8DDD
+:10F5800057C255D42799A13E25B10E3699D5179962
+:10F59000A13E85DE6FEE779FB8A709BEDF7E9F4D47
+:10F5A000EC136771FB6AC2F3163B701F79EC966C23
+:10F5B000DCF733A19AC50353FD0619E8F2F9BFE958
+:10F5C0007C207763946FC1BE4A1DE47383BD65A63A
+:10F5D000CFA1EE25BE4FBC86F4B94F5CD447897CE1
+:10F5E00071E6908D12E89F78DD4AB067FF387CB7EE
+:10F5F0007DA907E3CDF13AAAEF125C67A590332607
+:10F6000035FE527CAC5FCA4C03DA19E972E029CCB2
+:10F610000B6EE936037FEECE2E40BC359787F11C8A
+:10F62000E4D4E2368CE786D37CE7B29D3DF423E652
+:10F630004736B1F59F87FD6752CF77CF2FFA732EEC
+:10F64000D853955D4646879A796C899F5343BF434B
+:10F65000AFBA1C867FAFC6BE15575D8EA4AAE31352
+:10F66000DFEF6F9D821EBFCD6ED7D257A892E3E722
+:10F670007D7398D53FA9E9EBC0AAEAD127A92C3917
+:10F68000B8CA8FD7F366A94307754AE6D86C90804D
+:10F690006FE6B4DD08E7999C4F8EE5C2F9276FE766
+:10F6A000DE7513B69DB1F7A17D2AE769D61E1C7BD6
+:10F6B0000CCE43F95BCE889BE0BC93F3F0AD4C429B
+:10F6C000B2B615DC142A867D26D135DDA09F4A35D9
+:10F6D000F52E9A731BA02E13CF99B0327C66F0BA28
+:10F6E0005852C5ED77C854D176B3BBC40BF50C5650
+:10F6F000E2D9D30DCFB38DEC7C07C2EAB09A07E70D
+:10F70000B3BA094EEF249BC7B3493404F4DB9C6FB2
+:10F71000C7F7E3F27A8F91E7B1D8F78F3EC7F6BD0E
+:10F72000897A5F426C3960F7583D44D516E79E10E0
+:10F73000C59603E71C348B78216FFFC112B83A27B6
+:10F7400041FF1E9D787731FE8ECBF3F70E82F54E8A
+:10F7500036A8CFC116D79772197D9CE7E7456EB3DF
+:10F760000426C138C792664F82237867A65518ECE5
+:10F7700068A73DA50379E4E474619FC1E667AFF231
+:10F780004BF0FB29E2BC466740C1780009B4EB406E
+:10F790007F3A4FFAB1AEB0CE14CB55287D194D81CA
+:10F7A000E9399057AC397E17E615338FBE0F7520B7
+:10F7B00047F56D1352405FE4F3F333A8E317A2ED6E
+:10F7C000435979E8F7C5CF771D2CA17C983A83ED92
+:10F7D000A79D423A148CBFD8D8FEAE49A5F9DE6683
+:10F7E000FABDA9BC8E64D2317F0AC40126DD16554C
+:10F7F00058FE26A624D66D882B71E93D897C709D24
+:10F8000027A14DE05C6875FB06AFBA7D53F9D7437D
+:10F8100012DB0388AF1EE0F8A214C5FDD6A1B1C467
+:10F82000C6D6C5EA139FE67EDB301731E541FDA45D
+:10F83000430A815F306C6F26E665F696136CA7EF7E
+:10F8400034ED3025AE7F83CCF2BE3C6E2E7EFF09B8
+:10F850009E815E7DFE9D748457BA5546790A117566
+:10F86000A0B7B22C9305E4BB8ECB79B13F7D628A01
+:10F8700009CFED6D5ECA7E37427B6E69B3DEF60A54
+:10F88000E0B1F96338928AFAD9C986889C02F8A255
+:10F89000BE8FA3471E0BFA81F1AE01BA1FC37E9F34
+:10F8A0008B52F9A0C473E39B9D6CAECDF7293CDF6E
+:10F8B000C77E27A428FEBB2194ED687FB02909F2FA
+:10F8C00009CBB7E5887512C507FDDD44B4D97EAF15
+:10F8D00074DE16E7A51252A1E0F94492E8D784ED50
+:10F8E00047793FA9EBF53F017D0C4AA1EBA1D7D7A2
+:10F8F000723C48DC3F958F6E423AB1063C4027DEB1
+:10F90000A4BEF71F75E4303B62624AB90BE2EBCD4F
+:10F910006EAF0BEC2A011F715F8C2B9E8BEF79D39E
+:10F92000FA1EF7352EAF3BF83E68EDF3977364F59A
+:10F9300077F5745CEB377CD7A9FE6EFCBD9CBEDF0F
+:10F9400013F7457FFC59AF32E03306B729BC6E96FA
+:10F9500014A9EB5D48B9D7C4E4BDBABE65B2B4D250
+:10F960000DFC799DA9BE2B4ADF7F9DD3C96439F078
+:10F9700047C837BC3EBBF020F06735FC30011DE7BF
+:10F980007A125903C472BE22F013FB409417C78049
+:10F990008F1A748121A9B4FD89BE6DD0D27CE4AFE9
+:10F9A0007772C6F49E9FA0C3F83C29FD01DE05FDD9
+:10F9B00069E72DE880DCD8810582DB4804AF2EC2E0
+:10F9C000EAB2A9FE62F5D79E9C9E7551E29C646ADC
+:10F9D0001C04FAFDF5A610CA9FC9F61F611DDAF9CD
+:10F9E000BCC03998D7CC919FE2F942C45583F61632
+:10F9F0009DEFF97FE57CA18208EE0B3B50D87BBDE3
+:10FA0000EA913F36A8EA91C5FCB47C2CE61124ECBF
+:10FA1000DCA8095DDBD1BE0BCEB07A61DF4810EA0D
+:10FA20006C4B319F8675CBFBB85F169258FD702FDB
+:10FA30007BB1FFBA65764E41BD8D9D1F24CEA1FAE4
+:10FA40005E81385F88CD9BCA2F7EBE10B6DB6B3CD3
+:10FA5000E8FFC5EDC6F9CC0EBDB6D0D202E735F64B
+:10FA60003E6788C5F7C85EA387DB89A8BFDB93D94B
+:10FA7000773E31B33AF904394EA4F49EF3CF36EA17
+:10FA8000993DE8CDCD677941D95B06F8D802792B4D
+:10FA90005DEF38E4C0F4C0E85CDA6F7EB12F177E0A
+:10FAA0009A65AE81C519295D6DED26506ED7F8387F
+:10FAB0009C0B7A1D697C4B1E88743516FACF1CF698
+:10FAC000293B2FB487AEC6E53A99DC0421F86D7C5A
+:10FAD0007A322D3001C669B777BCD7500A794B23EB
+:10FAE000C25FD4336AF937613E27F56C3E0E381F8A
+:10FAF00099CEE7FABEE67329F49D48471984D1717F
+:10FB00007F740EFB069247F5D0F90012B81DBE1B9C
+:10FB1000A7F735DE56DDC03EE6ADB322DE6F9DC5EC
+:10FB2000F231C12466A7425EC69D0EF127F6FD5B49
+:10FB3000D732FAB8D56C447A99D6558FF91752C591
+:10FB4000F2295EFA1FCC6726F14D849F58B9D93649
+:10FB50000DF781CE98AACEB7CC344DC6FCCE2D84FD
+:10FB6000C5D36E9DA157FD7EA480C34CB2FE53A8A1
+:10FB70000F99A9F9DD482D5CB4F91A018FE6F26FEF
+:10FB8000E6FBFB72E3799D219799D769C945F97422
+:10FB900069799D83FA189E23F09A73E1D6A5942F74
+:10FBA00086FCB818CF5B9F98BEE8F10DB4FDB32D6D
+:10FBB0005760FBB5F43B961F85E78F1562BB4AFE85
+:10FBC0007436F04151D9AC29704EFD41331BC765E5
+:10FBD00009B4C3EF8EB846148C0297ACCA10C37E2A
+:10FBE000D78FAC1F0D75355516D63E52F25FA3B0B8
+:10FBF0005DC0DBA35EBC02DA07A54F67F795171A55
+:10FC0000562445E0F7C5AA5259FFA9A39ECA8438D5
+:10FC10004155256B0FF356AC1D08CFE5CF66F7A510
+:10FC20008F7FC9ED63616FF939BFEFF51D6F81FDFE
+:10FC3000667EABE4857D06FEF2E3EC5C3113AB4BF4
+:10FC4000F0FB4A143877B2D2C7E27B13AC4D6E900A
+:10FC50007F37060CA510C7B559F35BE07CE701E5DB
+:10FC6000156300DF13A81906FA8FF2D5F3C0CF335E
+:10FC7000AFFC343705ED10355F09BA9D26F8A94A67
+:10FC8000CD37541E74313CAAF9818EFB0A8E7B95C8
+:10FC90005A2FC5E5BB866FB5F4D8AFDE276A391891
+:10FCA000D74F6B3A902EB309DB4FB40DE894F1EFC8
+:10FCB0006F617E06B9DB03F7F324EF1558A8D18FE7
+:10FCC000FD20E607660F19D57B5EF04711F6229BF3
+:10FCD00081CD960EDF65CFE97B3EF83138312FFAC2
+:10FCE000FD13089F356C3EDBA446FEFB22CC2E178D
+:10FCF0007E6F83586FA77ABD6516B62FDE45A8DCE8
+:10FD0000C1D87DC915DF34EF20D7B3334CFE078D42
+:10FD100032FC4EE15CC4F36D24F41CD837EF58027A
+:10FD20007F84F9E8E4D0FEA804BF0FE2C37C32C5AB
+:10FD3000E3174CAE33BC887969E1D1D08F5CD5CE66
+:10FD40005B0B871EFC74A37DE6E6BF23185F9766F6
+:10FD50003DCDFC770462254655DDE9911A56572BB7
+:10FD6000E675442245A827250BE651E37127AD7CB3
+:10FD7000EB677F9CD0CF629E77F3FD595FCA4CEE54
+:10FD8000DDAD8BE03CF3AABBCD00C7F2BC02763EF2
+:10FD9000109F7F737908FB1964A9CF3C71799E2C61
+:10FDA000F260A4CF73DC3CF956E08B3B4DFCDC3AAF
+:10FDB0000D5D104DFEAC3F3A11F1BB4AEEB7C4F3F6
+:10FDC000A99A73E2E698FACE9B4914BE59A9BDF1EF
+:10FDD00020F2693768E374D7B1F8D50D3C4E37A1EE
+:10FDE0009AE127754532FA75A9A5471532BCE73C5B
+:10FDF0006B81AF0B8E40551EE635A263208EF0E678
+:10FE0000989F611E499C1BA9859F3F4F16F1C64BC9
+:10FE1000E297FEE6FF078B7F3A7CF713A91BCF839F
+:10FE20001BEDE6E79192403EF093DD965F01F1070E
+:10FE30002A772F5E0467141E51FCEE74066E87F756
+:10FE40006E23FE8950EB9D5A1DD0B3F83DC1F8F1E9
+:10FE500032EE474EE4FAFFB367D87EFD2ADFD04783
+:10FE6000C7837D7A584FC21EA81B67F0F96CAB0E92
+:10FE7000F5FEC23746BBC07EFF80D3E3904DB2EAA9
+:10FE8000770887862DAA733D86ED4C55B587776434
+:10FE9000AAFA8FEC2C503D2F895CA17A3EFAF0280B
+:10FEA000557B4CF73855FF2B8F55AADA63A3535473
+:10FEB000FDAF3A355DD5BE3A76BBFA5C9290AFBBEA
+:10FEC000281D7E3F81C1E3DAAFE6A8FA9F49997405
+:10FED00018F872DE7A56275E4196A8DE5FA2ABC3A1
+:10FEE000FA6BD2C6EC9C46FA1FDF17AF607D1AB5DD
+:10FEF000EFE1A701166E52DB41B55D1BD6802CEEFB
+:10FF0000751E86C6DED1DA37431C35706C3679240F
+:10FF10008FFFAEF895E44AFEBB345ABCE2F9029F6B
+:10FF2000BDA5433F63D91BCCFE5FB68BD5DF1592D1
+:10FF3000C10370DFD9611D094B70CE42E3C6F15297
+:10FF40008F9DA3858BD1A5C6B3D9A3C67352911A31
+:10FF5000CFC95E359E0794ABF16CF7A9F19C56AD05
+:10FF6000C6B3D3AFC673C64C359EDD01359EB36AAA
+:10FF7000D578CE6954E3396F851AAFF9A1C5AAE7E0
+:10FF800042AE0E6C5DA6BADF2C759451494AE6F973
+:10FF90006BF17C89C16DDFEF933E04FE43F43FC6F5
+:10FFA000CF8D58CFBF80E21FEAF9BF20EB0F414A47
+:10FFB000564B070D9D1B30EF76B974F0761EB75F78
+:10FFC00005FE2FD17EA5FAF2BDBC3168E7BC0FF269
+:10FFD00061E610EE97F8FBB67384DC4AB42B12FD91
+:10FFE000EEFEE4592F3DCAFDF07EF5A8C60F7F074F
+:10FFF000AA9FD05E5F8F71AF599CAE3F875B632134
+:020000022000DC
+:10000000EEFA2CDA07EFD08994D379BD03F31E0101
+:1000100076C2308C93DC41227A3C3F1C2A4675A87C
+:10002000BFB04EB386DAED709DCBED87F93C8E62A2
+:10003000340588C789F193BC74F86E7637EE33FBCC
+:10004000BF17F44F2B008000000000001F8B08003A
+:1000500000000000000BE57D097C94D5B5F8FDE6B5
+:100060009B2DC92499241012026126210B908449EA
+:100070005804451C9660D4806193C58833498090AC
+:100080008504D0D7B4A5CD40C2A28536B4A8A8A80F
+:100090000302050B345804D4688745A44F5B636B97
+:1000A000AD4BCB4B0045F618B4D23EDFF37FCEB953
+:1000B000F766E6FB480AF6BDF7FBF5F7FBE3EBBB9B
+:1000C000B9DFDDCF76CF3DE7DC3BECED38C612196A
+:1000D000FB06FFDD717DCA988FB1DE8CFD01FF84C8
+:1000E0007A231C455607E4275A1D0F3D069F8E189C
+:1000F0005879B30DFE28847E46436A2CCA9E96DD4D
+:100100005D3F2BA13163AF2A1E0F1B0EBD265A5D2A
+:10011000DB15C68624316B622C1427F853A64532B2
+:10012000D6C761A07AF04F61F18C0DB6D2DF6C4F6B
+:10013000DFE6A531A9F8973FB628FBDB8F9BEA7075
+:10014000273B4604EBDF68BD6673F3129C6747B537
+:10015000CDB5D5C9D87B5804ED9EBFCF1250A3189A
+:10016000BB62B2AD55A219FB2062DEF1DE0EC69E67
+:1001700009F764215C66CFBA6B35E69523718EA5CD
+:1001800030BF2BDEB6910CE66DB17A5C585E65F53A
+:100190000C8887255EEAEFC98856A1CF220E7FF82A
+:1001A00023BBA8DBF9F3F94C50F8F89F847B46E3B6
+:1001B0003A8E185A935D080F63EB486CC76CBDA963
+:1001C0009F4B660E979EE0303EA27F31AEABCC6275
+:1001D00071A9D0E77885E3F54CDC83F36AE0CFF9C9
+:1001E00086A2F880AA99F79D346FBB7740620AF423
+:1001F0006F12F3B6F6167077641545F63CEF06EC11
+:10020000BF17E47EA0F8B73B392E317FD017E37FCC
+:1002100014F216C3D5F7A643BE23DBE0DA0A459BEA
+:10022000C3A1EB3CC6DE11F07EC604F958FABE1637
+:10023000BF2784F3F6098F1BFC0DD0BE68FCCB846E
+:10024000A7E717DB683D5EE63033985F29739B7143
+:10025000FE9F8CFBCFD7DA001FF31D1E0FC2EDC12E
+:100260003843F27B340FCF90A9306F36E6E6E89F33
+:10027000B175063692B16976BE84F9026ED399DB08
+:1002800084E3CC641E138EFBFBCB663703FAF83D88
+:10029000E098C17C67311F7D9FC3FC94DECF025480
+:1002A000FF01D646F9772372FAD7C1FCA63E919199
+:1002B000C60C1AB8FF1BCE17E8E5C15E9C5ECEF6F1
+:1002C00041B86FEC7D53F43B55D00BF0EB0FB11FF1
+:1002D000E0D7E1B929217C3391D30B33DAD3FE1176
+:1002E000DFB47646E5B0A19877DB1261FD770A149A
+:1002F000DEE9AE2CC475E6AB36D60BE0DFEA50FD86
+:100300001618B3609CB72FAE0BFE45FA004F53DCB6
+:100310002A433CBFB902BE40BD3773553FD2C49497
+:100320004D93CE61FBC271D31BA361FD93BE6E1BC7
+:100330001E80B4A09FE9545B261FE31BF8DF976C77
+:10034000F3C41848EF4ED8676430FFBB076ACB0B85
+:10035000B3206F0DE6A73063B01CC63D8C7000FA69
+:10036000A9FB73EED86321ED186B52916FB63A2258
+:100370007B7D3A04B283D9E06F70DE6A71B4A71B4B
+:10038000FE91E957F5AEB1C78026EF51DCBB1C44A6
+:10039000170E33D27F8991B9BBE3BB8B698AA01F4B
+:1003A000C02EC8B37BC55C3B0BAF9AAFC07ADB1CD9
+:1003B0009EFDD8CFD2C99FCCC3F53123FBED308051
+:1003C000DBE2DF01DCA0FC543D403E03F8B3DECAB3
+:1003D000DC16C63EADB753FEB3FA044ACFD73B286E
+:1003E000BD589F49E597EB5D9467CEA2D7B0DF92E9
+:1003F000B59F1B3D598CAD099378E4F35826E878F6
+:100400004DFF917F72C1786BDE3651BEBCB9695227
+:1004100004A4CBFA9F5A1901DF97ED525CF8BDB2E4
+:10042000C56DB6211F1DF3AC46F259F876DB1414E6
+:100430003BD5D714E601169A3DB0E82D1C6FC41FBA
+:10044000CFC423FCCED68FA2F99CAB77D37CDC2D16
+:10045000EDC7E3A0FD85FA02CA273A8BDE45BA74E0
+:10046000B3CFCD587FF2EE76631294E7BB1537F227
+:10047000F75837F3FB017F9B4C7CBFD804FB05F298
+:10048000FBB8EC69CF3CC4509E7B3EC6F166C69675
+:10049000E6C7C1F729A3BC46AC37EB6BC6302FE9E2
+:1004A000FBC67CCDE1512DF072E97585E074E9C0A1
+:1004B000907B6F83FE5E3FA13215E6D579CD40F388
+:1004C000EAFC20DC0F3B5357BDA52FA5F661364C47
+:1004D00087F46159B83EE804D69DA9180D75C0FF90
+:1004E00017F67C2701E12FC7BD10DBFCD78F50DE4C
+:1004F000FD85CB3BC69A3F7D0AE561BF04D7A3903B
+:10050000BB6C62B3893F596D04EE878BCDCCC3F3CE
+:100510009E2198BF10CE1E2C82FCC8BD49E3917F5E
+:10052000703C4746509EA5EF7D22E5FB8EE0783B70
+:10053000F63CD9F98A03CBFDC4CFBBF63ED3F769AD
+:10054000C855ED5B158EF37A15D6320AF8E3D50D52
+:100550001124B75E35B94ED6A1BC7EC6E6DA0EF5DB
+:100560007EFEE3EF9E3A84E9FAEABCEF421AE38C9E
+:10057000A57ECA7EBA6830B687FD9B25C23A7F71D8
+:10058000500984E53096BDF1F0CA44186FE8E6766C
+:10059000435F4873B7290D980EE95F7002F7CD3EAF
+:1005A0004E07C17DD86EA79A846CD7D7FFD11DB4F2
+:1005B000AF6BF7FBAC8D9F8FEFCB82FBFE60A5F995
+:1005C000FC0A27D2EBFB791E824713CDE3A596E9FF
+:1005D0007FB89FE13A40A3C0797BCD2EDA6760B93E
+:1005E00026C85FDA9FBAE55158E301836F0BED43EC
+:1005F000255CEFB854E47B12E9A51AEAFB205F9D65
+:10060000EB8BBA15CAABFF32D00594C1FA3F7B67BA
+:1006100001C263F1FEC726F5857A97C6309702536B
+:100620002F7FE9EA246CC7FA3386AC7D697F43FCEF
+:100630005C68F7A3ACF123904E8AD4661A87D5F094
+:10064000719E10FB176B03E0C40B92837A3F82CF3D
+:10065000F83DB625E670120BE2A7A66585D308ED36
+:10066000877BAC2E15E9DFE94BACB505F743D8C75E
+:10067000463B91B4CDA25FFBF4E4A26FB18F99C564
+:10068000BE24FB7BC2CC7C61D04F7FF8AEE03E6BDA
+:10069000E6FBEF76900F48BF72FF8571EF728EA078
+:1006A000F66E94A749B0D9E6C23C939EB0903CBF89
+:1006B000D9F1A5DE5413CEE591D43F66C735BCD63B
+:1006C00006EB3D1EEE9989E3CC17FB3733BA1C28A5
+:1006D000A7F784BBEF73D27ED8918C6B80FD712E0F
+:1006E000E617ABA04FA586E853D69BDB1F3F0C77E0
+:1006F0007BB0FDCDD6D7CBCD655F1A582ED0C1B219
+:10070000C72C7E06F36E40F90AEB6A881C694539EE
+:10071000C08E19AA8EC37E793B6FD9D5DFB2C83C93
+:1007200092130D8C750BAFD7819F3D203F0220EFB8
+:100730003DC0D763AF75A89CDE5B8F460F4779C974
+:10074000DC91403F775C33304FC87EA6EF07F05511
+:100750008FEB1BC7229827647F74B31833F22DB335
+:10076000C5FE73EB16F31F23F037A6F38308947FBF
+:10077000CBBECC2339D8D3BA5E13EBFA35AE0BD24D
+:100780004FD28A36201DDFFE85DD88EBBBDD383594
+:1007900019F51398F71338EFB15F18B4F3FE3A5C0C
+:1007A00093BFD9F93FAC309F01F9F173B31FF9B191
+:1007B00005B7398063CBA22C3FF2FD0133CFFBA2FA
+:1007C000CCA49FB644321FCA9196A9F17E9F13E52F
+:1007D00021E3FA6B6FC6CBC344FB39F1D4BEAF053E
+:1007E000408AF2E0FE70D17FED5BD958BE2289E4E9
+:1007F0004883C9BF3605FBFF81EADA0E78FBC06F7C
+:10080000F099804E36C604EE57A1DF8D9FC7331C8A
+:10081000E7031648AAC171CAC349EEDE66303C3808
+:10082000D586F5DC89B100EF03FFAD92DCDF980BD4
+:10083000791BC9EDD9CDF07DE354776238F63335B5
+:10084000DE40F351592D7D77F2761F9978BDB902BC
+:100850005F1F0AFC005F13DF7BA64418916E4F3ABE
+:100860004BDE7512BEDD890ACCF7A9B234867273ED
+:100870006EC55D4EA297A627487ECD163890FD61C5
+:1008800003EB48D47FF9BF39F3B787213E679687DA
+:10089000B5C30EC93E285F19E980F6333D6AC00230
+:1008A000F294CDC87777E9672938AE9BC6AD6E1E46
+:1008B000947A26849E4B2C2027A0FF43619E0F88AC
+:1008C0004F0FE552F921504EBE017E3A5596B617AC
+:1008D000F98A95C9F35FA014F1F07A8795F4CD9E5B
+:1008E000E8A101E13F54D029E26539C73BE85D94B6
+:1008F0006F983D98CE25CF9938DDF8F685115E0BBF
+:10090000A65909CF9DB3C3B758A0FC4121B71A66B9
+:1009100087BB15A8D7F092C56F70D27987EAF95EC8
+:100920008BA47EABCC3C5FF5621AD1D301B37FD7E9
+:100930000E2C7F3D8CE8A12A8A8F5BF54A92A03766
+:10094000B773158EFB9A85E8A02ADC114DE5FF1ED2
+:10095000477432D9EAF91BC20BE8AE16F5822A7346
+:10096000203D06E07B52D0D5496883F8F3D546D2C6
+:10097000BC89E521EF69E8BF15F1E931F372F63D75
+:1009800095CA4FDAF9F827D7F1F18B7F52F9360380
+:10099000BC9D2C9A94381FE671B23682F4BF3FD7C3
+:1009A000A90173149E5F3A1E4F877A97979F1EB9CD
+:1009B00009E6DFB6F2E364A48FE295D585D8AEB838
+:1009C00062F914DC377BE2CBE22A60FE103E4E492E
+:1009D00071C7A4C07AC6A6787A615A93D5B600F5D5
+:1009E000E0CBE6D667F11C9114E7E983DFAFBC7C6E
+:1009F0007607D78F3BD2713F586CE4F421F7D51AB4
+:100A0000417FC7533CFD53709F080FCCC3FD232289
+:100A1000AB95CBBBE53727E7CFB76C3FA0C0389588
+:100A2000E12D8B2955FD39D8CF052510A5A412FC41
+:100A30003CC84F17ED812884BBC7C0F5B3CA9DDA07
+:100A400075E13F23CCAB12FF807695CDAA3B0C71AC
+:100A5000CDFC669C7F253307EB3B8378827E084F75
+:100A6000CCF6E779DF07F857EC1A9487E780CA9845
+:100A7000433FBE8DEA413BC927EAF579B99EEBE7D2
+:100A8000C3D77751D0FF4549FFB3CDF25C4EE35F4A
+:100A90007EB90F8D7F61AA3F1DE17F5911F576590F
+:100AA000783DA00623CEF3979C9E1E37F90CE17487
+:100AB000BE6744CF9571CD23112E520EC11C7C060A
+:100AC000A87F616F12D597728B153186ED2AF726B4
+:100AD0006EE5FA993897E244A17EC52F78FF9847D2
+:100AE0003E3CFF4292188FEBC77AFCE9D75B9C62D1
+:100AF000A0F53E2EE577A4E47357C254807FC62646
+:100B0000B3A6FEE548F3836EE877905FFB5DF65F82
+:100B10009EA2907E364087B7BE6AC7610BF2D3F3C0
+:100B20008CF8553FAF9A147EFE7BE1852E3CA91CC4
+:100B30006FA0064AFA70703DDC8470FEB00B1F0F88
+:100B400025815CAD4418A404E17320D79384F2FF9F
+:100B500032E6715F88817C16EA411CDE322FE1ACFF
+:100B6000A7B3951F2E486A83F64F09F80042FB2071
+:100B70003D76E92F26385F64E1B9B27CD899343CE0
+:100B80006FD60E82ADA06B3D0B36E55A919F166E67
+:100B9000CEB59684E0A161E7B0130E80F3C59D4603
+:100BA000178AE506A3FFC7A84F37EC549B7D8CCA74
+:100BB000AD08DF8BB623BFC37A0B36C7E4A1BE2CCA
+:100BC000DB2FDCF4F0A0B210B80FD9A9C54376B37F
+:100BD000363FF49036BF0D6543EF6FDF2E37A0CD63
+:100BE0000F3BA1CDB30EC016E041B5723C1D1CE514
+:100BF0003AE1003C0DF0AB2EFC34C0366DFA64D403
+:100C00002F36ABAE34281FB0BCE89E6CC87FB679D7
+:100C1000BE0BD15CAEFA167F1F7058FEF1A413B85C
+:100C20001F5E60CDEF4F063C2C68D960363A70DD10
+:100C30005ABA3D6010F4FA02B7972DF26BCBAFE7CA
+:100C4000EB15D25E9A194A4F7ABCC3B8F7B9614224
+:100C50005575CB869D812DB3BC10081D6036BA79C1
+:100C60008319F5B61B8FE3E3F462733B101EDE516C
+:100C7000BCECD6BA09ECF430F863DDBB9370DEDE71
+:100C80001F29A437787F95710CF781F67D73EEA646
+:100C9000F4BE025ABFB4CB2D6C51029190B78F7243
+:100CA0001C6A8376F3FD8A0BE75DD26809CA33F8C4
+:100CB0005FD93ADD3C368694C3FC171E3AFC3705F3
+:100CC000FA2FDFAC6DB708E42CCAAF8A6DDF58424B
+:100CD000BFCB73E3AD2D5B545CF77C397FDF588667
+:100CE000EBBA955765BD847E730633B06FD4F62E8C
+:100CF0003A8BFBCAAD1B793B10975E5C6FB5CDECB0
+:100D0000C0F5565B592002E67122D2ECB6C3F7ABB0
+:100D10009B22C91EB6C002FA641EA52C2C0FDBB99B
+:100D2000A2B1DDA7EF70BB58751CC777F5730A9D9C
+:100D3000A3AAD18889F9E7797E110BD03A904EDCCD
+:100D4000A1EBF36BF3AC899FBFAA8C81C3088F0A18
+:100D5000D6C6CF4F8047B7841FC0AB0AD6F9412C07
+:100D6000EA5BBAF6CCE5C1716B6C5C7FAA39F48D95
+:100D700025B45C9E03E53955DA699F4B2F0AC7718C
+:100D80005629EE27AD30CF5542BFF66D0823FA9DA8
+:100D9000BB85EF37A0C7A6235C366E4874A19E3191
+:100DA00017F4F230E49B45E1540FF45DB2AF748068
+:100DB0005E8DF6F68D31CD01DC37363EE6243D1AE8
+:100DC000F45F824BC7FA30FF5605F560AEC76CDCA6
+:100DD00090417AF8AB729F5ACFF5AE6EF4622A67F3
+:100DE0007DB81EFF112E25440F4E8DF7A4A586ACAD
+:100DF000AB6CA53B11F79DB2696603DA9D58F9CD3E
+:100E0000F90DB60B3DB203D68FEB38A3141D378412
+:100E1000E8A32353F93E3272BC7B87A847FE853294
+:100E2000C3D447EFC0F11E373870BC2E78BBDDE964
+:100E3000388F331BC2F290CE468EE7F69F93B95C93
+:100E4000BE470C676E3FA477887EEF483568D28432
+:100E500070A03FE8E74C3EB73B470E2F227B1BECD0
+:100E6000D524E7F5EBB847F453662EFAF7DBBB99C8
+:100E70008F840F9BC8F585334B94AD7C5E805FC833
+:100E80008FFC6918D9E9CE88FD47C219E86604D9F4
+:100E9000DB85BCDA20E8658389D3816F113F3F058C
+:100EA000E985113D6C14E7ACB902BF6C3DD76B818D
+:100EB0005E389CD7270A7A61ECEF480FF90EAE67CF
+:100EC000DFE47909F05E9ADAFBFA7393C43733FAF8
+:100ED00047FC23FF46F5C13D077CB07F56FCF2B1CD
+:100EE0002806F5CE199BE25DD0BE6AFBAA2837A47E
+:100EF0009F197D517618FF9C5F2DF077036FBF809F
+:100F000037DAD715903F8BF14F07EA3B3F9A82EBD8
+:100F1000FBEB76931D4542CD4E0B9D9F16EF5F4434
+:100F20007A36E4DB797ECDE72AE60F69EDE0153FFE
+:100F30007F2CDE41F0F6251912300D243148176F51
+:100F400033B902685F7E4F75C130A03777ACC6F900
+:100F5000E9DBE33CAE01BE6B9A55AF39FAFAF21AFF
+:100F6000215F6AF6FFE873B4EBD5E8ECEEE5C2FF6B
+:100F7000A0B7BB37A546F6FA140DCCB7B05B500F3F
+:100F800002B8B802C8B7309F3422136EB76DD8F5D7
+:100F9000444E3BEA0BDBDE8A52B2827677E997E871
+:100FA0006C2E7D0EED9A3DF1E36561870DE28BCBF2
+:100FB0002DC7210565001CD0795A650A44DD06F06D
+:100FC000A8DA62223953B5E7F91D4F219D7D68A14A
+:100FD000FDBC72CF1BEFDF8AFAEE3E53AF42BE0C70
+:100FE0009B121FC4538D83DBC9245E2A7EF586D9EC
+:100FF00091CDBF2F8F0DE2A772DF6133CBBE1E8E66
+:10100000139A0F9BDB6CDDE0A9B97D12D989767D3F
+:1010100065463E38F7BAC2FA38AF6F5FBEE58D2835
+:10102000D4C7104EB82F497C75E14F571FFA9FF275
+:10103000CA70AA67C773454FF85B827B07D17724D4
+:101040008B81F1CB3FB2F80B11AF7B9745E13ACEE4
+:101050001A6B399D3FB32A1EF5BA72932FDE4E29C3
+:10106000FF5EFEECC3447F0B95DA787B16D177A246
+:101070008174065F22AE6FFEE699B4BE05CC43F4E0
+:1010800057FE8C5AE487F44B232BD8D70D9FF41DC1
+:10109000C8F9E4EC56402AACEF2CDA6D506EFC5ED9
+:1010A00015E7DC25B47F3F2CD6CAD852CA7F29F475
+:1010B000B64BA95D7E656BE879B166DB9A56C4CF05
+:1010C000F9FEEE3E384F80834FC04BF906FA55DFEC
+:1010D000CDEFC3F1C31CC691A21DECA313F03BD608
+:1010E0006F35B9D1EE1DD24E9CE7F8F80F89F1614A
+:1010F000DEE1785E3D1BCFF576FDFA0A062AD2DEE8
+:10110000D6CA42E9AB27BEDFF608D1D517EF71B9D1
+:10111000B2D83FB580CA5B4D813E58EE3F3C43217B
+:10112000B9606181EEF87A9B49F0B5B61CE6695466
+:1011300042E1FB3AD7431780DE1508E1E320DD9852
+:1011400083DF69DD3F15EB6823BF98F4A72D14F208
+:1011500040BF6EBD7CE83550F8E3847C90EDD9E665
+:10116000EEFD3941B9E0A371AB603F413DA3EA43D5
+:101170000BED1B557B4C45089F0BBB8FBE3F17CF1C
+:10118000A1CD928FB5F256CFC7E52F8EE8968F2F5F
+:10119000ACCBED9E8FE17BB77CBC4E21F9F63F9541
+:1011A000B7B0D391DDA0277E5DD883BC1D3B502B0B
+:1011B0006FBF6459D1B761A1DD3B80F0A383AB84DD
+:1011C000A75E7EBE9FEA20F8EAE527C3D0881038E4
+:1011D0004AF849FA64CC43E374D1B1A45349C75DDA
+:1011E00074AA5FAF168EFA72C34046F3297AD9C447
+:1011F000ED672D0AE9DBD0EE78D270E253376D7FD0
+:10120000ACE97852AFD0BC5F976FD6D577EBF2459B
+:10121000BAFA1E5DBE5653BFEAD051333F1F0434A5
+:10122000F52C75F7D039E37A3DC2CFFD3EFB3F3751
+:10123000FB902EFA7598512E9A56325F24EABBAF76
+:10124000A9A4EF5E717444A15EB22A8CEB6D57ECD9
+:10125000221FC3F31DBDCDAB512ECAEF1D61DC4E65
+:1012600072A5A8232A26E49CDEDEA246A13DB6CDC7
+:10127000CF0ABA8F136920B8B6B19ECAB9FE96AF2D
+:10128000DA92EBD01EDAA4BA804C58D98A5951149C
+:10129000BFD0927AEF6CF83EFF372A85015C09E7F0
+:1012A0007605E6731B317EA094A3907DC67C8F8F5C
+:1012B000817595B6F03882B2755AFC2EB0CD880E85
+:1012C0003850EE68FDFD0BF15C978AE73DEDF70ABB
+:1012D000B68EE8AD42C7171E61A7D5F3C516C9176C
+:1012E000B92C57D863C8CFB154C8EB7C35EBDED9E5
+:1012F00000FF2B275466817C678BCA56E37A772BD5
+:10130000E4EF418700F2DB62E04B9C8F84CF45E441
+:101310009B8C9EF5928B2FFD65E4F7914E0E7C9C85
+:10132000837ED88B073E4C7F15F307FF94FC31BBBF
+:10133000BEFE84D7FF360FE5F095D72D0CE9FBCA2A
+:10134000EB6F26A35DF0CA2B163A2F5F5969E1F6C1
+:10135000E6D723FDE88FBCD29FEBB90DAF7D95D3C7
+:1013600046FB6E23E1EBED8166AE37B5FCE749B491
+:101370005777B6C0AA509F783D82F8A7E69530F21D
+:101380006B5F79EDAB91A1F10FFFD3F548FFF595B8
+:101390004836FB45A45BA1D7D7BC3AFA79F4E756A7
+:1013A000EF3F6C2E85F209BFFEAF1C949F575EE4A1
+:1013B0007AD26553DBB3686BFCD3C0393F3525A2C5
+:1013C0007D0E3AEB0BDC96F6E434E493EBE1C2E1FC
+:1013D0007005E080EB02B894A3DCEF091E97FF656F
+:1013E000E1F1F93C2ECF6E61E8FF0DC245E17E844C
+:1013F0009648BF55A1F5F3EFAF7F9583F2E646EB34
+:10140000B5A59989AFFF7F59EFE0B47F55FC727A9B
+:101410007F71A083C7F5E9E8FE7ABA3EF86F94DFE2
+:101420001BE9A2F9DE24BFDFFD2FBBFEFF1B7C976B
+:10143000FFCBAEF746F8FE8DC077A41DFD8A575E40
+:10144000FBAF64F62DD6BDE65F96AFFFF1BAA5BE41
+:101450003E5E759DC885FA6FB1E6F75C4ED23EBA26
+:10146000D53BF6A7493B093F1F4D607C9F9E60AD71
+:10147000247D7342BFF5A41737B03CF243F8FAA9B4
+:10148000E48FA1E00B80C39B09B97EF2271903FD0D
+:1014900096417E7C5235C55BE9CF8D13C22717A0DC
+:1014A0003E7A7405CC0BFA391A69B0A3AF78623F63
+:1014B0003560C9A1B41DD3E3C9F79C40BD65A24DF9
+:1014C0007B7EBA47771EBACBA12D2F602FF642FF45
+:1014D00059419689F9613E93B07EC8B9F1A7697602
+:1014E00082CB5DACA9D16EFBF6703A23E0743D1C53
+:1014F000FE31DCAE839338271B457D3DDC8CB6473F
+:101500005BB19D91C1B997AF97CECBF2DC7B2378CD
+:1015100032719E368AA1257C8DFDB89F34A45F82EE
+:101520008B84FBB785B7C4931EEE12BE126E7A3C55
+:101530001C446354EF20FCFB19738DC877B70B3D37
+:101540007EA23186E7FBB5AA45C48F7E82FB842F3D
+:101550005C46D44FC6D96228EE9239FAC7E07916B4
+:1015600055CC6F92182B1915335281F5261999CF46
+:1015700002E74DF4A1911DF511A37FA513C7E1F674
+:10158000DAFE466E9706EEF685E7517DB719F2DE74
+:101590009F2D646EA8EF4D622E85D767D1B1148E52
+:1015A000C6548CCB8214DB79A379BFDE3ECCBF92CC
+:1015B000E393F082C726B45F40BF6E432C6F1F9544
+:1015C00047ED7D06DEDE6D8474402AB7AF77ACB29E
+:1015D000D0F9C3BBA67F3ACA8FC2F15ABB71713A28
+:1015E000B7ABC8F4CD74CEEFAAC195807A7149E348
+:1015F000203A0FA9E145D52FA1BD7F6F04D1A37774
+:10160000F5039347E0FCF6C6B9707AE7A7EC1BC96F
+:10161000EBCF79F88FF0DDB3338CBE5F48F7F44938
+:10162000877ECF2B8E792FC187929947CD09308441
+:10163000A779EA25B4FF4DF1EDFB1DFA19A7CC50AF
+:10164000A9FE14C6E32B596304F9A327FB3E3726F2
+:10165000407F93E1B081E5ED61F6E425307FAFB0E6
+:10166000F7A6A673BB8B1ACE3C2FDA705EFDD35360
+:10167000E0FB64D67D3CAF57D61FAF6C46FFD080F1
+:1016800009DC1E2FEB633FD8EFC274EE5FCD117003
+:101690009179802BD52F5B6B694FC573CF5A53203F
+:1016A00003D26732C7E7A54379610A9BB409E1FE1B
+:1016B0005D956DA5F97678C9CE1D99E9403C788095
+:1016C000A429BEB0C9E940BB57FBB8E600FA07DA67
+:1016D0009F74BA1A1C84658AC791E7ACF671818140
+:1016E0006897EFC8E57E8693F6B6483C1F96DAAC5D
+:1016F000149F23E37AE6DB399F0F68685B7F0B9EBC
+:101700003B1F535D5B213FFF31EE77F9C466F52B3C
+:10171000785EDBC8F994ADD3C6F130BB8BEC3DA548
+:101720004DE3CC78BE2CB3B9CDB8CE8A0C4F11AEF8
+:101730008B7D0DF01B89719C8C98C1DBE4A538135F
+:10174000350AF80EF9C4E888C273AF3E0EA846C445
+:10175000FDC8FCA130CF1CECAF24DAB117E9E55489
+:101760005D2AD93D3709BA2BC43846F44F18DB122D
+:10177000713EE1F81DE05F186B4FB7113D87318472
+:1017800043BBC99E8EF4DDBE2ACC807EB6C2959C3A
+:10179000AE81CFAC4668FF889185A3DF2043B42F8C
+:1017A0005E612CDA02F97E56668C8C45BACA25BA7F
+:1017B0006ECBF4E4207D7EF603360AE9A174DD06E3
+:1017C000F2AF48BA60C6D6897130CE67DB9D792802
+:1017D00037251DB5658EAF4D0FA587190AD101A418
+:1017E0008753891EA63D8CFD168E0F0C5C9A85E7EB
+:1017F000D12AE6C6FD3D81B9504FE8641DE47FEC77
+:10180000B4991D68E792F244CA0DC0ABDB1A1FA45D
+:10181000831DB0DF1B4D8CEDACB752FA42BD9D1954
+:1018200041C6EDAE4FA0FCDE7A07A5CDF599F4FDDB
+:10183000C57A17E5F7D78FA2FC817A37E50FD51760
+:1018400050FA4A7D117D977209E0427248CA152903
+:101850008F4A6DE676F4474AB9A4A79B7900DEB1BA
+:1018600079D49EE49E9477B80E435E501E49FCA640
+:101870002845BE0427CAB1B63988FF7CF5E29E83AD
+:10188000782E2FB7B9E89CCEB8DCEB047A45B824A3
+:101890009BD921B4BB362C71B7AF7106E17F7FB9FC
+:1018A000C28C2174F5406D183386EC1B0FD6C568C9
+:1018B000F2C5757F78A30FF45FD1CBB30BF176F24D
+:1018C000879F3EF327F8FEDC0FCFA721BE611EDB0A
+:1018D0009FC071978777CD2316F38D26F2470D9021
+:1018E0007610F8877829619CDF9EFBE1DF89BFDBFA
+:1018F000EB2C0ED4873F423C015CFF2CF054526726
+:1019000021F879579DDE7310F97CB999E45C49A3FD
+:10191000E0C3B500CF10FFEEA94446F608D0A659A3
+:101920001DC0EDD40FCC8108E8FF94C2F95701A582
+:10193000A018E3FED6BEF901F2BF527782FCE71E83
+:10194000AB8DEE35319FE962687F4ADD71AAC7DA57
+:10195000FAC5A0BD84F6B13BD0EFE8363B60DD4868
+:10196000D388B792CC232C11FD264D8A1DFD266508
+:10197000E27BD95A85FC9318773303F4BE77D355AD
+:10198000C26364BA91D2CA7426F4BA26DA9F24BD1F
+:1019900096AD8376C8174DB9E6052172B8447C2F01
+:1019A000CD34502ABFB78B7EFBAECD9D8DFA445F00
+:1019B0002CCFC2346F36C2B7AF6D925109C1FFC789
+:1019C00038FE089C071FBF12910AFFF768668A79E4
+:1019D0007E16E287EF5F729C92CCBCD518C759B2D5
+:1019E0006E1C4A5FD6607225F4827A67BAFAE17A91
+:1019F0001BB3F278E5AA1EF60F693FFB0CFF1C4DE6
+:101A0000EB26BB6EC5DE5FEC7D057AAEF8D842F8FA
+:101A1000AD182AE2A7B2FC23A793A1516BAF9EF8A1
+:101A20008BBF4491FF613F8FAB8494DB53979773D7
+:101A3000FBAB0BF8AA1BFFCFB1BD1F47756BA7DE31
+:101A4000AFDE949DBA46F93A0AF507B99EFCD7BEB7
+:101A50008CA77928D7C8FF53F3DAAAF8EEEECFE8BF
+:101A6000EDD55DF66C61B7D397EBED757D32747E85
+:101A70000123A3FB58D25EC7D4AC68B4EF7F29EE34
+:101A80006BF474AE91F6ED9A4DD0491CF0A7D111CC
+:101A90008DFEAA2B3DE8D30F66F0FDFE92B0875F66
+:101AA000D9ADD239E7CAEE48E2A7C5BB7F761CFDA7
+:101AB000878BB729348D6AD64A700378326BE83E3B
+:101AC00086F16671D7CFBBD39F168DFB48E52F22D9
+:101AD0006B91CE16352BEEED309F4EAB23BA77C807
+:101AE0007C6ECBE0745669691E497016F3CFCD70D9
+:101AF000D077596F51CBCFC87E0CF52E931EF4CB07
+:101B000008F4F523BC7F87F3BCB079980BFD7E8B7E
+:101B10009AF72D263D6277841D8F0CE7459CB0EC2B
+:101B2000E7CE0CCE9F776670BDE582F0075DD8AB3F
+:101B3000923CC379227F9D57B4F1789345BBC9028B
+:101B40006E9F0BFE92F51735B7470D84FA670FFDB0
+:101B500081D259625D8B6CAD39B8FF9EDD1F41FEAD
+:101B6000ACB3FB9F9EF42A8C77A9795C2FE407D94C
+:101B7000FFFC0C13D5BFB4592D4078313F8F7BA9A2
+:101B800046F80E0B9D67DC169F3394EF78DCCF850B
+:101B9000FDBF8A326405F1596DF558F15E63CD7E63
+:101BA0006F11CA8DCF140E4FD3FE713EBC8F54D32C
+:101BB00092CB909E89EF12A9FE5A43483DB3C94586
+:101BC00042D17868AA3B89E02CEE13897879BC1F52
+:101BD00087F267E9542BF927E60D75CCBA1FE5E4C7
+:101BE0005B268E977E8E27507F9BF74E1CC54D2D12
+:101BF000753A66E1FC97BDAB52BCEFBC61420E2466
+:101C0000B48DC0B8C5AAB50A73C33ADB9D5C6FA892
+:101C1000F2ABCC03F9BE400F3E00C5FA8C14214F45
+:101C200003E978AFEFA97283DB0CFBDF4933F3A93B
+:101C300068377A91C73357A5F0B8E1A790EE21AD88
+:101C40008A0DA4C7417F17053EABA605D2314EA22F
+:101C5000EAC5448A93B868E67E4BFC8E7ED2AA3CE5
+:101C6000680FF57A8978586C1F13423F55252E0767
+:101C7000D653635D8E5C1BCED77E99F4D89722191C
+:101C8000EAB18683913CCEE9E7615B2D2178DA9257
+:101C9000C1F5E55E028F6C2E8F877C5CC4633FBE0E
+:101CA0003DD18FE73759FF7193670EC201D781FA93
+:101CB000FB2273533AEAB772BE8BA29A689E17054D
+:101CC0007D2F0A6FE2F1D2E29E2CD6C77CBB8951F0
+:101CD0001C77C72E0BC5939C4F6C3D80E39FDF356F
+:101CE00088E1FADB9DFE0587A81CF447C05BC50BA5
+:101CF0009600AEE7DC2E6E6F3E67E2FAD8B9A9090E
+:101D00000EC45BC1B44DF3C81EB3CDA220DECF29F3
+:101D1000CC9C80E5DB7BBB7CD8BEBE8EE2A42B4096
+:101D20004CE07D1C480BF05ECDB9ED83283EECDC29
+:101D30006F54BC1185DFD7E2770F6B9AF73D84C7EC
+:101D40004E7E7E3AFFC27F0E0ABD5726D38A6DDAD9
+:101D500038384927B2FC4806B70F1C11703E9EC1A7
+:101D6000F7ADEA88E6C753689D1CEE80273AF7C1B5
+:101D7000C61FF9F4708C834853506E3C0574F534DB
+:101D8000DA1576F2F3D5F9DD268A0BAF3818E9A615
+:101D9000B8B335B718280E42E57A788501C047A94F
+:101DA00042FD564CCBA47BBB006F3AC7766C57C53F
+:101DB000388CD970DD3B789C6F21EA8A549E4DE5C2
+:101DC000E744FEDC816CD2EBA07F37DE57AAF8DE59
+:101DD000F7391CA797BFCDC88E6125F95AD5E5C73D
+:101DE00019138DFB5DF59ADBA2F13E1F7B4765A8B9
+:101DF0009FE8E174D5E8EA8372B577A690B3079EB1
+:101E000031A33CA814F7432A5F50B83F19F80CEFF0
+:101E10003B56AEBEED09A2CFDF99581AACE762F38C
+:101E2000CFA234F81072B0ABBED945F52BA13EF667
+:101E300053B9FAAD289ACF0E13C5995CB75FDD6C24
+:101E4000FB17D49B6ADF451FCDDC8E72DDFA59EBA0
+:101E5000BF7D0CFD7FB13BCCE5A3AFCD74AFEC8271
+:101E6000A97901AEFFC29E3092471762B87C380B49
+:101E7000F2D39781F3B8E7271497F5FBE9741F6E47
+:101E8000A15FDBAF1CD79869E27416E78AC6B8BEBB
+:101E9000EA77B87C03BCDC4BEDDF31517BFD3A4E79
+:101EA00067F0765DFCB92782E8E1425F8E970B7B95
+:101EB00033683F6A8FE1740EF34DC6FB7317F66407
+:101EC000E4D2BD34546E801E2AC4F9F6424C73B27B
+:101ED0003DA4BCDD24CE6901A88974836D40EFABBD
+:101EE000A8E37A55A5751DC587605CEDC83C4A031B
+:101EF00096D8EBE363815EE9FC787FA6B053E27885
+:101F0000F1227E9BF49D6633CA6F8FD00BAB76EBCC
+:101F1000E36B79F9AD998A8C0371F492F1BC48872F
+:101F20003E85E24C2A1B972C423AAFACDD703FF263
+:101F3000999C7FA59115E039AC5D51691EED61EC6E
+:101F4000C169B86F848E13AAB7C979E254E3495FB7
+:101F5000A57DECAE4CBEAF61BE09FAAB6A54D6D1DA
+:101F6000384E799EE5EB927002709831AEAF7D9C51
+:101F700028EF61DD729EFA75CBF93C90C9E551BB43
+:101F8000D3F1933188E7DFAA743FF6EAD7C3A2639F
+:101F9000BBD1CB82FBBA3918DF8AF1BE487BD04F68
+:101FA0004E26976B95183F0BF34CDFAC8DEBCEDCD8
+:101FB000A6CD0FDEADCD67EDD7E6735AB479D73134
+:101FC0006D7E1A8EDB9B9FB3F13E2E9EB331C5739F
+:101FD000B6C3C2CFD998C77336A678CEC6EF78CE2F
+:101FE000C63C9EB3318FE76CCC4B78E3791BF3781A
+:101FF000DEC6F2A7059CAA449C24E201E99DBD1C13
+:10200000A6B9EF73E5357E8F03E880F3CD1C33F17D
+:10201000CD535883CE1DDCAED477BAD581F1BE8FB7
+:10202000C47A5665A25F54695D9D887833B651DCE9
+:1020300069CD2B3CEEB42A2FCC86F68DB65567576A
+:102040006338E703B19E47B1FE1553C70E846F7521
+:10205000DD51BABFDEB6C2F1CE1D1C7F646761E5FB
+:10206000B1A43779719F8BED198FFAB86FB64E1BFB
+:10207000E7AD8FFBD6C77BEBE940EA7BCF993A12FD
+:1020800051AE9FDE655D87F33F1D26EE9FCCB6EA1D
+:10209000FCFD424F5BAF6CC5FDFA1799B1DCAF7226
+:1020A00002F4F36EF65999965E1B467A78577E9D38
+:1020B00062A07B7109F1B40F2D13734A563ADAD737
+:1020C000A09C5B64A07DF32AE86538DED5F754D286
+:1020D0001F32361934EB19E40FD7D0D7909DB1BA1F
+:1020E0007B0D7D35F5871E4AD1DD6B18AC8DA39F26
+:1020F000B1E2309EEFA7AF1BA6A95756749B0E8E78
+:1021000062DE427F2D83FDC30DEB7B6AF9A664C4BA
+:10211000EFB2459DED6B503F7D298CEE8595E3FF39
+:1021200003B9580E7DE27DC6F2FDE23E709D761F3A
+:102130002E15FB50B991F9ECB1413A2CB733770C1D
+:10214000B45F34B8352780E78ADFFC61A43D05CF52
+:1021500015E3FAA03C4A36B9290EB66A5F5ACC0A92
+:10216000E8F758AAE7A34CC0CB99A6A33F2EC6FD1B
+:10217000701F3FEF9D5EF7AB288A1313F4966CB285
+:102180008723DEB734F1F838B48FA9B141BAD8D279
+:1021900014173ED0165C6F900EBE263C017EB81D13
+:1021A000A7FC08F93D3A9BC57AC7293ED4A7E5FAB2
+:1021B000968A7D850DE4FD3C24F267C4F942AEF3B6
+:1021C000E2A0C3390EBC7F517F285945796ED8BD36
+:1021D0002311D2D116CF97B89EF22D697F1A03E34F
+:1021E00054FC91AFE7938D13A246A3FEB9C7E42A2E
+:1021F00084FC9AA6E7CD78CEAE30FACD145FB96BE9
+:102200008B19E38BEFDCB985BE2FD8E9A578CA8599
+:10221000AC96CE9F9FC97704043CCAC72B9BED3078
+:10222000EFB983B8FC280FE7FE3BD08FDEC0F73B49
+:10223000AEEE5472318E6746D13EB317BE470D12D3
+:10224000F783747CD2F9F6F4FCDE040F7E5FE38F33
+:102250000C4EF1A9D7F3C5F46B4EE28B19D786D09B
+:10226000B96C6660103FFF66E9CEBF6FABDC5ED72E
+:10227000C2F9A0DC1CE8351DF9E47513E9B9D5B045
+:10228000DF8CCAC37335EC8D90168D5135F45A33FB
+:10229000314243CFB359ACE6DECB7D183412929F66
+:1022A0005198AAA93F6BC6101DFDE705CB498EDCEE
+:1022B000AAB95F57BDDCE75048CF1CAFFDCE789C74
+:1022C0002063776BDA57B369C17A48DFDBB81E5CED
+:1022D000BD3F662BDAFBCA0DFCFC34DBC3BF2F3ECF
+:1022E000C4BFB3D94CC38703525D7FE2FBA289FC14
+:1022F00002D29E3E1BFFEE06FE8C8577DD0FC77B6C
+:10230000F1688FD0DC9F16FE409C37E2A15AD88D31
+:10231000AA33B9DDA8DAD76AC6770700FEC6B8586F
+:10232000AA678DC3F8C82685EC8A982EA778496DD0
+:102330001C16F687718C8B4FA85EE4137D7939BE2D
+:10234000DF83F87D85C7952EDCA48F835C47FEC8AC
+:10235000C5680F0AC1DB53831C425FF1AFEE8BF0FF
+:102360002B5472E95EE4EEC3668CB39B31232617CF
+:10237000F9464F5F52AE033FD3F9BBF3EDA3445F81
+:102380009DE546A2DF1BC161B19BDB51F574B780AF
+:10239000B59AF19EF882FD8A0BCFA3580FE1D117B1
+:1023A000E951078FB8D8EBE120E1D305AFFDFA384A
+:1023B000370EA78587147FA01B38E9E7DD13DCE41F
+:1023C0007A16783C93502EC8752DC4F963FF307F80
+:1023D000EC5FFA21D8283D7FA6927D6A71118F8F1C
+:1023E000D5D3C3B46BDCEE72DF3523A5330AB5FC5D
+:1023F00088ED902F665E8BA7F26F4B2F8B619EFC52
+:10240000FED3CDD1895C8794BB417EE0F7066EF4A4
+:10241000BE8FDEEEB8639088131CC14668E29185DA
+:102420005CD5B7D7C7234B3D40BFBF78230D1437CA
+:10243000D9694B21FD42CA598FD83F3CABBEA47A23
+:102440001EA8C76713AFD96F3CC2FEB7343285DE12
+:1024500063485E11178F78F286D929FEDEBB42A54C
+:10246000B8672FD47384E827AB1B539371BF38F53B
+:1024700048C6B33ED0DB4F7DB757FC2818E7F42A97
+:10248000532FAB2358EFD4AAFC648CD338BDC13290
+:10249000DBDF0DBC5AC5FE50FDC30F683FBB64783F
+:1024A0003B6A36B4AF5AF5521486F957AEE2FB7860
+:1024B00079AAE79D41BD713FDFB2C38EF0B36FC90A
+:1024C00041BBEF49D80EB0BDD41F2A56E5F741FDF8
+:1024D000A2EABF8F3E6BC77BD62B4CF1A87F9E7BB9
+:1024E0000FF64385F633D21B3E0B832EC89F164949
+:1024F0007684CF14E646BFD245C3E1BFAEC1736157
+:102500006E737A00D2EF593C2771DCCA55CF93DE47
+:1025100052F1E88A7455C57ED3A2BBB39BC87487B9
+:10252000D8B7517FC714F5778C9341FD1DF3A8BF31
+:10253000638AFA3B7EAFD9A4D5FF2EA7713925ED6A
+:10254000C9031A3A72D17FE71BCF326B69BFB565F9
+:10255000A2BEBE4C0977A13C5A86BA12E6FF1246CB
+:10256000E758B62D91EFB702CF7556EE37FA4ADC31
+:10257000CFBDBD0374B210FABCE39A9585DE9B1DF6
+:10258000C76234F909D6444DFD7CBB53537E67C204
+:10259000204DF95D8E5C4DFE9ECCD19AFA935DE3A1
+:1025A00034F97B47DDA5A93FD53D55939F5E304764
+:1025B000537F669157533E6BF6224DF91CCF124D57
+:1025C000FEFEF2EF6AEA3F50BB4253FE95014EA475
+:1025D000402F2D78EEB2E0FB29564ABFA3DA8D28B2
+:1025E0003796FD36CD86F81E33C150DB9D7D3F63A7
+:1025F00030D787CA86B85306F7E6EFE0203DF617D6
+:10260000EFDC8C18CCF199C480AAE8BCDB9A88F482
+:10261000ABAFA72F1F1371E4AA0370F893C14367F0
+:102620001A410E8DB9E5C8B054C89F18BC60A611F8
+:10263000E4C698DB8EFC2A05F2AD837FC1CB871EF2
+:10264000B98AE5B38654F2F2E98C548F3FBFD07754
+:10265000A60FE77F47CA3A17B793747BCF5CA608EB
+:1026600007BCAF8D70C03400F48BE911A05F4C8FB4
+:1026700001FD96817C3A0EF48BE909387FE2F77F01
+:1026800087F327A66FC3F913D3DFC1B913D3563825
+:102690007762FAFBFAD994BE57EFA176EFD797533A
+:1026A000FA417D2D7DFFA8BE8ED23FD7FBE8FBD43B
+:1026B000C1D28E11609AFB01E867447FE221D3C545
+:1026C000503FB0F4574AFF64432D6B8B4079D1667D
+:1026D0008CF9D41AF43BF66C0730B24F43F4B1686E
+:1026E000E62E1E4CFA423F3BC96FF1DDE4F0781153
+:1026F000CF7F744E4F1BA6E2BE55FB06BA65FF683E
+:10270000E8FEDDC411823E460D712F20FA10FE75E1
+:10271000E9DFEE8A9B09F1BF1B42E275E85F48DC06
+:102720008DF483CB389FDBADFC9EB1F473CB781E68
+:10273000D95FFE178CE4C3D8B546D25F228D2C80BA
+:10274000FDCBB89DB1D6E65C8C63185B65A37BB509
+:102750007DE0BB398FEAB95548B7FD0DEAE704FDC6
+:10276000EA7DC4FCA19CE69FFF8587ECB063455CD5
+:1027700001B6B7F2721FB61F8BB685E194927C7AD0
+:1027800006EFEDE605FDFC583F82D70F607F03FFA3
+:102790000EE34505F9A67F6C732ECAEBFE8B6D74B4
+:1027A0002F74F3B800BD6745462780CB74797EB29D
+:1027B0008ABCF4E7EDEC4376A40982D7BFEFF06C56
+:1027C00042F81759EC7F89203E4BED8FF6C9A9429C
+:1027D0007FFE07787B06E940C253E245E251E223DF
+:1027E000247E8AF0D0135EF5F8D4E351E22FFF8BFC
+:1027F000205E10AED7E32D8857B4E7FEABE06DB88E
+:1028000091BF5F66A9B2D2BB6837C2E3831D6C5229
+:102810003456717A46207EBCD71CC7315FCAC64D7C
+:1028200042D4CAF2B1583EE2FA72CF171DA6E810A0
+:102830007CDF2EF03DBF87FE643DF91E83ECBFB107
+:1028400087FA6F85C9B80BB72D776430FE71593E92
+:10285000877F815325F84FC85A487A32B3713DD3E8
+:1028600001FFA15C9AF47511BD4FF925DB8D9E5BCC
+:1028700036A997563F2DD0F9ADEF167AE9DD3ABD6E
+:1028800054AF577E3E58F8B39DCCF92DDF9DBCC6A2
+:10289000E5DACDBE3BC9DF2D9D28F82C49D059AAD9
+:1028A000436563908E9887F6C963F86E690EBEEF34
+:1028B000E9A3FC5DCC4FE93D2C40FBEB6410C498D0
+:1028C000BF174428E68F464C29C6BB7113864D18A6
+:1028D00088DF43DE658B1CD29BDE65FB0F7BC8BBAC
+:1028E0006C47263AE87EE5116B2AE95FC887A61097
+:1028F0007BE06F607F1A08FBC751D8BF307D03F6BD
+:10290000AF81B0DE3761FFC2FCDD992B18B69BE4C6
+:10291000D0C6EDC8F6F7D827C0C1A467F8DD93F399
+:10292000723F84EF5B311913D17EFE56CC2D1371AB
+:10293000BD6FC5F431F0D462A634FBE0C0EEF443C1
+:10294000C907C1F126D1787AF84A78EAE128E1FB93
+:102950004FC0F396EEE0396230E3F649EB1FA21266
+:1029600052D07F1725DEA3FC6D8E0AF97338B5446B
+:102970008C57BD8DE639B66E34330E23BF4D16C26B
+:10298000B5CACAE1A5B75BB16D7D0CA1F1BB57CD4E
+:102990009E8221B0EEB39B55BA377EE9C530B2476F
+:1029A0007DE6E7F6B67B14CF649C5F95EA5887EF27
+:1029B00088B2B7F83B67ECEBA3C9D322BF059D6E85
+:1029C000E3F7EDABAC93BAC5A33C4F4D71BA47707A
+:1029D000FAE7EF454ABDA29F85BF4B20DF2FEC49A8
+:1029E000CF1819CEE5603F0B97DB12AFD08EF249BE
+:1029F000D0CF489073493F09A7F3C5CEDEEEF9B8B2
+:102A00003E6947E8EC17E147793B363084DEE52A3A
+:102A100038A1523CF11111DF75E7905A5B0AE0A929
+:102A200029CD5383ED98FAB58A72E66D58671CDAA2
+:102A30001F4E0CB3D1F9F15B9E43BF3344C88B1CCE
+:102A400096A3B9AF26E94EB551FC4EE77BFC3EDEBE
+:102A5000D2DFF0B8CDA5BD558AFFD7C7C58D65E9D2
+:102A60003F417BE3845E2697DF11942FF21D204BBC
+:102A700082813942F4EC3047387384CC27223356B4
+:102A8000938F74F5D5D48F1E95A2298F710FD6948C
+:102A9000C715E469F2BD8B6ED5D4EF337BBC269F9E
+:102AA000E8B95B533FA97C9A368F7C0770EF5F3B98
+:102AB00057D36E405D89A69ED357A129673E776B99
+:102AC000663CCA71FE2F75ED524DF9D351053C7E1F
+:102AD000DCB680EE29A6357D4FD39FC46F521CC74C
+:102AE0002F73F0FDC107FF91DF42E0393F41BB6F1B
+:102AF0004CB08F3B66A7546BD748BA411CD4A17F1A
+:102B0000960EAA99960E7AF1389EFCDF0C73A01EE1
+:102B1000A3C73FFA2342D789FE8850B8A03F22348A
+:102B20008FFE88D0FAE88F082D477F4468F9B013EC
+:102B30005AFC8F68D5E2FF960FC6FF433C8D6ED3DB
+:102B4000D2831E4FB77DA6A58FB19E7082CB04D0D5
+:102B5000C790DE259E66C37FB4CFB3A268B41BDCEA
+:102B6000C1DC742FE07F0B5F9775F8FA92AD1B8183
+:102B7000EF5C5EF17239DED33E7F6580FB0B94BB68
+:102B80002942CEEBED00329ED4379EE3D377328CD0
+:102B9000E4D55786B648DC3FBEA3B6915D3E91753D
+:102BA000BC81EFCF0CE9E56159BDF1CA36703F94A5
+:102BB0003FB5E8BE5CDCE7E6FDDA928C7ACDBC017D
+:102BC000FC3D4196D546EFB4C8F9CC4BE2F147D66F
+:102BD0002C21A75D3C0E29228BDB7F225D768A8328
+:102BE000F6663111E7C992E765231DBE1D96817413
+:102BF000B691DBB9DA4C0E8A6BF1013DA29F12F55A
+:102C00006DD487FB0B7DB4E143AB95D31DD3ECEFC3
+:102C100083FC564D1CEE909D764D3EBB3941537F53
+:102C2000E82187A63C3790A9291F76C2A5C98F68DD
+:102C30001DA5A97FCB076E4D7E745B81A6FE6D9F9F
+:102C40001569F249ACE34984E7F8AC141EDFAF081C
+:102C50003B8083E365DE77E2E93E8D3C47C8B86C94
+:102C60008FA063FD796480D94371DE0D89CC45F76F
+:102C700041ACE23CC8B4E7148F88AB96FA3CF369E8
+:102C8000E3AA653C75D779469C5FE47922249EDAF5
+:102C90008DF397F1D45D7817EF4BEAE9F35E817716
+:102CA000FD3A0698F9FDAF86EF9AE91E8B9C9F7E50
+:102CB0005E9B443CE0766BF7EF0F3D20E8AC2DA522
+:102CC000686616D47B16B62782E775E3B9DA7C000E
+:102CD000DF861F985D2B1D371E6FDE50BE9E627C07
+:102CE00057358BDEE9A47B6B72DC6A31EEF41CA5F0
+:102CF000DBF5CD8BE6F15D2CDA4CF72E7A1E8FC317
+:102D000035C1CC1AE99D24710FE18175CDEB3154A9
+:102D1000B3D8DC64E2EFE3FB4D68272A1C0F7A602E
+:102D20002EDA0DDFDF68037DEDD93A23D97D1EDA77
+:102D30003DE63ED020BBEE950C80731AD24921E2CD
+:102D40001FFA3D97CDE39D1FCBE2F2215FFDBAEB69
+:102D50003E804523E7F9F9AF1BBA237A94EBF8BF1D
+:102D6000BA1F20E9570F2779BE6662FF1A28E625A9
+:102D7000E1D7653F11F093F7331C4B4C455B6D7405
+:102D8000CFA300E3CA24FEBECEE674F96616C737A9
+:102D9000D64379D453BD7C352B1AEDE09DCC116D13
+:102DA000BF813DF8FFE8DE04C1BFA7FB5E3DC989D6
+:102DB000EBE4430FF7BF7AA24FFAF72DEE8185C8F7
+:102DC000091EEF23F0E11F6820BFFA9A482D1FFF6C
+:102DD000358BDB5D9E96FB850FCEDD5A39C1D0AEBB
+:102DE000DFB04A15726241D7EF48E0F7F9AB4CA467
+:102DF0005F3356F438C6197CB2D14471B163DD8CAF
+:102E0000F49892CD8A7F8B82FBE898049CBFD7A769
+:102E1000DD8FEF60AED5E8FF285DABFDBED0C67F8D
+:102E20006F62BEFEDD14715E5F7883F3FAD92CE128
+:102E300007723117E95DC2FF5F2EDAE8F5AE4E3F4B
+:102E4000F79BE1795BE576278A1B93FBBB03FD3794
+:102E500021EF81003CC333711F6F34761BCFD70540
+:102E6000CF1EE2152EDA44BC828DC76774EE0FE3E5
+:102E7000FE4DE95712F52FFAAE5239D6C7DE2EE5D0
+:102E8000F2B80BE94FD2FBAB3A6D06F2B774EE8F96
+:102E900024FF3CFA71A2810ECE1BF6C58F7206E7A5
+:102EA000E76953357E107DEA59F1129D17CB533DEA
+:102EB00031D918876D74595D907FC47684DE8F2A6E
+:102EC00014762FFD7CBBCE5D63F8FB2E9D3EAECF0E
+:102ED0007616F07738402E32E42319873095C129D1
+:102EE00015526F6034CDE7DBFA73A65FCBE57ECC7D
+:102EF0006BB7517BCFDAD1941FD0B87E09DE8399AE
+:102F0000D9B0D0842EECB62797E78743D3B6FEFE20
+:102F100095E188B7714AB776F9BC6C85F8A14D1771
+:102F20005F2FD3ADD99C5F7E9D2DE5B888435AA114
+:102F3000101F2C55988C4B22392EF3579B443E9FE3
+:102F4000E797ADE2F936F1BEFE0E6147C175638ABF
+:102F5000EBC673FF6E6167C175638AEBC6EF28B776
+:102F6000308F720BF328B7308F720B53945BF8BD20
+:102F7000841525E7AADC0F353194EFAE59D9C4107A
+:102F80007E413F54681EFD50A1F5D10F155A8E7E2B
+:102F9000A8D072F44385E6D10F155A1FFD50A179D0
+:102FA00036EAAE601EE59C7BAA263F1DF4FC892113
+:102FB000FC8D7EA8D0FED10FA5E9CFB344D3FE7E11
+:102FC00056A7698F7EA8D0FA0FD6291A3FD583E27B
+:102FD0009DD3D24D71443FF31D4535D980DFFF8825
+:102FE000F8EF874D2988E79645FC5C16EEE2786E8F
+:102FF0002AE07837308EE78E3984E7E5669ECFE7A2
+:10300000F1C97AFA417FCF4413F7F7608AFE1E4C6C
+:10301000D1DF8329FA7B26A6717F0FA6E8EFC1EFE7
+:10302000E8EFC114FD3D98A2BF0753F4F7608AFE94
+:103030001E4CD1DF83EDD0DF8329FA7BF03BFA7B96
+:1030400030457F0F7E3F897E2753705EA8C70FD41F
+:103050009C1F810E35E747BB268F7A7C687DD4E3C1
+:1030600043CB518F0F2D473D3E348F7A7C687DD402
+:10307000E343F3BFCC72109FA13E1FDA0EF5F9D0E7
+:103080007C7693EF0DB49D4DDE7CF918A66D91CA48
+:10309000B30A888CE6ECF7EE433F5D5B98921C0325
+:1030A00092D3B4E2C3FB2682BEE611F17F39ACC3F2
+:1030B00080F8F688F7D43D0146F196D97F4BA4F20B
+:1030C000CB78AF5FC4DB22DE73F733FA5D12E92FF2
+:1030D00096ED5DCCAE622AEB07F3DDD7D38F2FEBF5
+:1030E00091FC0C9907DE00C67895DCE5B63C8CF7C0
+:1030F000DC6150284E62C74A1E27ACA7AB33424F53
+:10310000DA61D87704EF81747815BA0F9C6E642762
+:103110004C7908A7DA3CDC7FDFCE8E11EBAABD1517
+:10312000EF9BC8794BFB26C809BA3F37A6A3754267
+:1031300034F4E3F18DA3DF49293473BD01DBE17978
+:1031400072884F716F0DA1EFF785DCF4F8F8F83F46
+:103150007F6E0A6F17CEDBFDFCB92882E3944685AB
+:10316000E2A5C6EC666EBC9FFB1F429E0ED91D50A9
+:10317000713C6F231F4FF6EBDD9C4CF716BDAC6D19
+:103180006202F9481486725BC20DD6770CD707C766
+:103190008613689FBED97B3FB70F8FC9C7383AD611
+:1031A000C2E81DCBC9C3DFD5AC97D03E92FAA57D4E
+:1031B0002DC3A7D07BC1537C2B56E2B63ED9B7E4D2
+:1031C0008DDE587F1B73391DB415D1BD58399FC191
+:1031D000EE7D06D81659166B358429886F76342E05
+:1031E000847E80F36720BE735D267ABF77AAD16E96
+:1031F000A2F7237A883FB96A93F1273A7D4117678E
+:10320000D2B0FC8364B4272F8D3490FD77E94BFC5A
+:10321000F7003C9B14926B520FF28A38B5AB8D6F5E
+:10322000F49E8570DF67A2FE64FC4975AA3FD980D1
+:1032300071F57DB7E4C4AAA407C4E6A01EE0FBD5DF
+:103240007DA3B0DE2AFE8EE5D5C699D101EA89FBC1
+:103250006BCA04BCCA441C93171FF45683BF8B254A
+:10326000EF77B026AEEF497B8EF7B7C38E237EBDD6
+:10327000CF8877A5D77AE95EB63E8E6851A389E2FA
+:103280008E16E9F4C24AA11756DE402F1C9CA3D328
+:103290000BE5EFA588364CEDF73EC6EDC97B89C539
+:1032A00026CEFFC5FB18D9618B574C30D03BC82FB9
+:1032B00071BA295EC1F59BE297DD74BF50EA8BEFCE
+:1032C000083D66DAB52482FB1F84DE3213E32B014E
+:1032D000BE856D61220E2B91D259D778BCE5341B87
+:1032E00097036DAFF177203A7D16AE4F1D63FC1D3D
+:1032F000331D5D4E35FA0D78E1CE3506E812F293B6
+:10330000510F82FE66A35E148774EECCA7F8BD024F
+:1033100085EEBDE8E9BCD054FB06C687166E672E65
+:103320001F0BA573A05FECCFA7D0FB001E71AE955D
+:10333000F4ABA7F77911C21E65E3F6A62EBB04EA2B
+:10334000A8F44877CE2CD41BE7A16FAF2F27188C99
+:103350003B8BCCE2E5653939B31AF190D3839D42BA
+:10336000FD9E99E0E191EF20F46037407B01CAC9EE
+:10337000071ECA359784C8C9E1AEF18D434704F1F1
+:103380005DD275DF2F8BDE055DFA481AFD1E4E4FAC
+:10339000FA7029C015F9625E74DBC3F80B6B0D3946
+:1033A000CC3D31017F2750AE8F05308E70AEC837CF
+:1033B000EFBDEF4F6B6D0417CAD7E78C998571216C
+:1033C000D5D6B649487635599E02BCC718944F45A4
+:1033D000EE2405E5536E00CF849BE4FD649D3DA281
+:1033E0003987D7D7DB254AB3B8DC96BF8B72EA9111
+:1033F000837B71BF92F33FD5C3EF30ECCCE1F2F7A2
+:103400007FEB1E84FEFEC32FFB7A9ECC81753C6E43
+:10341000E0F7F9FBAA4D4CD887C82F2CE50513EF30
+:103420006004F1EEA677741B1E51ECA1F629CF5A69
+:1034300085DFA3EFC18EC3323B9EDC0EEDE6D59B4C
+:10344000E9F7F89E4BE7F4F31CD00FFD5E8AB9F55F
+:103450000DAB3308C78FEB7E6AA2DFA56181347C98
+:103460007F676E6D980BE5F17057D12F71DE1159A2
+:103470002E92438D18430EF9BB7A15BD88DFABD76A
+:103480001D7E16DF13A86971D2EF95780FE5AEC6E1
+:10349000774E86BB3C07B1DC6BB3D37B1A8B1B63C7
+:1034A00068FF9AD747DC0B651DE46793F07F47D828
+:1034B000AFD6BA38FD5E11E70E14905335F5BAB7A2
+:1034C000E3493BA1DECEA07F5FA227FB82B427A009
+:1034D000FDC01C626794F60953E6A939A837149B0E
+:1034E000B5F71265CA86F27D5F9E03E777ED5B59FB
+:1034F00093FAA07EBC41B1D37B9336C7ACD1902F59
+:103500003B61C2C84E5618EB30E3FB031D805F8C55
+:103510008F2E017E4539532CE2B4CA368D267E2B80
+:10352000F343DACD3B9C32BD7FC3D1FE2F23FD0494
+:10353000DCE4B72CB3BBCDB1217C5FDAA468DE1D1F
+:1035400090F98E1C95F311A8E308BF071E729AF13B
+:103550006D9F62502330FE8F0D7568FCC7508FE25F
+:10356000410A53D871FE0E3CCCDBC9C7CB0BE9BF77
+:10357000A489DF9B9679A84FFACFDF732209AE5E4C
+:103580003BACDB89A99DE60970203875AC87FE1C31
+:10359000340EE1A334E037E179BB18E350203FD784
+:1035A000EE37E138258DFC1D13CF3A3E8E676D8CCA
+:1035B000391BF523A3DDDC1FE1277E6F15E6477A73
+:1035C0006419C005EF63E17D37DC5BF4F0F18AF943
+:1035D0009635C5D03B0AC1EF1B4C888F393DBC8B5B
+:1035E000903594D36D49E338BABF5E6674D33D0716
+:1035F0008F80EF274BC21E45FFC09C8D4F989C903B
+:10360000EF3794D36FD6504E5F852981347AAF68F7
+:1036100049980BE739C7DE44EBEB82EF63000F05F7
+:10362000DFB92922F8025DF8306EAF6CA3169FC196
+:10363000F970F8966DF412BF2D307ACCF6D0796C13
+:103640003A9C86F7AAE6007FE3BB12CCEEA1FB9280
+:103650009F3E362B99D609F344B846BA1C93F0FD29
+:1036600021A0137E0F46AC47DEEB96E34D1CCAEF5C
+:103670009D4E1CCAE567CF7CE926BDA601F08B767E
+:10368000EF9EF8D28C821BC63597F1DF91D0F3A95B
+:10369000E44FC997924F25FF3E6B2A0A24284139EF
+:1036A00003FB6CED8BDDC0A951CC77AEC02BC0F510
+:1036B00058E83DAF6A81D7E2142DBF637FD8EF1C75
+:1036C000C1EFC5E30369F82E93AC2FC72D8EE5ED4E
+:1036D00090EE91DEE688F1B0FE52AAAFBDA752DAB5
+:1036E000252F76AF8A4779B14FE17ED0F547FB7F32
+:1036F00007F5D73D5C7FBD50B57D31EE97CCE84FE7
+:103700000E7DDF7F3EE83928271688FDB92CD0BD15
+:10371000BCB890EEA9181AC2CF653FDB93EEE1F278
+:103720002680F2E6CF7B5EFDE3AD8EE07E2AD753A6
+:10373000B2F65D93D7160A3FBEFE47333BE93E5EC5
+:10374000A9CDECC078E7D2462FC95F96007AA112C6
+:10375000127FA6A30B6FA342F7C84AEB46FAD5FF28
+:1037600045395DBA6E2ABD7B20F126DF6791FBAB40
+:103770009CFF7A31FF2621DFE60AFA9E5B3ECE9C53
+:10378000D88BF46E0CB36473C4F73965DAEF5D78E7
+:10379000EBF25F67AD467EC1FB45743E5967E2F6CA
+:1037A000BEDDDCFE7861E9C1DFDD07F5CE3FBE2579
+:1037B00099A95ABCA19EBA40E8AB0B85FDAF1BBCD2
+:1037C0006D19DA3B985FF81CC75BE9DEDFFE05DFA9
+:1037D000132B4E11F26E3D7F07A0A4791FE171CE2D
+:1037E000DA0D2627D4DB37D44970EA92FFB5B976D3
+:1037F000B42BCF5DBBC58472629F84838E1F8A45C4
+:103800009CB08433EE4B4A887F43D647F988EFDF7C
+:103810003FB4242C0AE379E4381F093A2FAD8D898F
+:10382000C5F14A6BBD3FC6F390DC0FF4EB3C1DC6FF
+:10383000F9A504FA43BE3D3DCE95BC342BA8CFEA92
+:10384000EBBF2BF0F8B489FF4E4D5244F32E8A6B38
+:10385000A80977A1FC1838B0CD8FE3227DE3BCCD59
+:1038600006FEBB3603ABDA3EC77980AA4D713598A8
+:10387000E2FB58A87AC7437EAB81DFDF4A5179FA71
+:103880009590D7501EC072D6AB8D7E5F23246E56A6
+:1038900043BF66B68D7E3FD1DC8BD1FB66925E6501
+:1038A0003F925E253DF7B4BE2B42AEDC687DA79DFE
+:1038B0001C9E66F1BB2937BD3E0BFF1D5DB92E393D
+:1038C0003FD0E1DDF4BEC7F7B3C9DE737A852B19AB
+:1038D000E3267B5EEFC6FCF86ED6AB5FA7E41B1950
+:1038E0000BDFE5CF6AE27E87D30AEC6FD0EEF4926D
+:1038F000308A6F93EBD2DBC3FF1FB640B5F6008072
+:10390000000000001F8B080000000000000BCD56D7
+:103910007D6C5355143FF7BE7EAFDDDEBAB1751B2B
+:10392000DBBA8D8F46BAF1CA80F891681D8CF0C75A
+:10393000A2DD14DD0C6C25B031C68A9360A8C6B830
+:10394000B2229211E24C3618044C876C7F18205D2D
+:10395000208AB19A8689468311E11F1292A60B38FC
+:10396000D16856310A44649E73DF2B9D08897FFA23
+:1039700092E6F4DE7B3E7FE7E3DE0F7A658085002A
+:10398000C77B1D00468093BD4E41A3BD2EB19FA7AE
+:10399000D801E6007E495B930D60AD05DA7C565C8C
+:1039A000C6F1970F9008568DF4B3CC7E831DDA9A3A
+:1039B0009026E4A4CDEEC67DBBBA7FADC7DC0F393F
+:1039C000002D90DCE7588AB2C12A1845538981AB93
+:1039D000368E7C579F463E77466EBB3EB51E88CFDF
+:1039E00066708E5600646DFFAEBE10EDB50F567852
+:1039F00018CAAD0BD6268278BE6E57A102B86EB734
+:103A00003A773BE83C54A1F4E13A6BD033358CE78C
+:103A1000EDBB1629C4BF9D812F4A7E0F1C002800D4
+:103A2000E8807B9FD7B41C6013FD43BE4D56C32472
+:103A3000ABC1F3E0C43C19E53B14B387A1FD4DC312
+:103A40002C6EC4FD060E7BD81280F2B06F5511DAD1
+:103A50004B1D64CA51923D5CEF4D9A5485339500DD
+:103A60005D0B7D35CA325CDC99999941FD8F20460A
+:103A700020515C512FC501434C1E05F2DB67207CB1
+:103A80004E2C760A9C13839336A75BC5BB11F106B7
+:103A900047010794DF6652FD2B37A426DF46BF524D
+:103AA00036AE1CC575BDE4FED649717E2581D1496F
+:103AB000721ABFACF1BFF9A8C98FFAB6D92A0B01A7
+:103AC000E9C66174A216CF9A4D9C70E8D47C6E1F33
+:103AD00079AE00D08F763C77E2F921DA7C0C60F782
+:103AE000E08A8224C9BD5BBF3F540D50A6E1784DEA
+:103AF000976CA4FC5C1F29B4EFC4D83606C20B0037
+:103B0000CF378EBC5D46F4FA88B939827C2BE5C686
+:103B100095B9186FC7E15C8F84FECCD0F714E64DE1
+:103B20004121C4A72BB0A21010AFEEBB13EFC955B3
+:103B3000681FB126DC7F8F664542C8D2DD7BA64C6C
+:103B4000E2E88AD1DF4C786EE1B1171E433D3FB108
+:103B5000C85891E07716CAD68CDEFBE9542FC28094
+:103B6000F51C78F3B2D0F30B3FFF4C0BCA77074E2E
+:103B700065939E2D439796CBB8DF59E5DFA8CC21FE
+:103B8000BD2363324204C323353E8CA35D01E1674C
+:103B900083DDF7420BE1FE9524707F98BDCE334C58
+:103BA000E07B2FCE488E8170F7C7C1201395C140AE
+:103BB000F57D5D8260146943A5DA2FE9FD20E1827D
+:103BC0007E5CCF1928A3BAD83C76A0CC89F4479B59
+:103BD000BA5E3BF6E2D7908DFCC78C06CA975F07AA
+:103BE0000605E5368498374275D389FD5A94B1DFCE
+:103BF000A764097D9B87D1A9BCCC3E4044C4F5A3F2
+:103C00000E56931FE5E194E715A45774F176CAEBBD
+:103C1000951EB312AAA03C3905DF95016915ED8701
+:103C2000B091E6335A9FB2CD43FBAD39D043F2B6E3
+:103C3000A5D138C73C074EE72E91D49212F5B55561
+:103C40005617F5927555099E6F1B6732D5E9B68FE9
+:103C5000CFAD02750DC01E8E67D7AD27C039CBEF33
+:103C6000AED3E306EA8FEEE3182FDAEF8E8E7F51A4
+:103C70008C7AB69E595FABDA1D00AAFF80D6CF5B67
+:103C80004FABB8044E4F1A36B8337AD6BBECBB4BA9
+:103C900030B7A34AEB8B43C8BA9EF2F63840EC64C7
+:103CA00063F3CE79486B641137E852653EECC37E0E
+:103CB000D74503F5516097A6CF757177A588B731C1
+:103CC0000F66D5C398A217726979C443C8C5039615
+:103CD0003DB01887CD56AB8E683860CD267AB88750
+:103CE000BB7488AB97591409F10E9AB26B684EDE1B
+:103CF00034AB346651E90EEE1BEF40176FF20B66E2
+:103D0000C0BADF210D30A24FB97B18220D8BF2FD16
+:103D100031AA5F0744190820E28CFC9EFEF4875A02
+:103D2000B2FF6479F2374097F43BDB9A57627D7CAF
+:103D3000AE68F1B993B554E773CEAA73FA881EF64C
+:103D4000989750DC3E68AA262DF89FF27E9B476824
+:103D50000EC758FC7DD29F8EF796D6C73EA3750F2F
+:103D6000433F1B9CFE6FC88F6799BEDAC32907D2F9
+:103D70007CD23FAD57CF71FE7A4D581775DAF02DD2
+:103D8000E510022C5943B1C34A75CDBC5E08A2FDB3
+:103D90003EF7D90D541F7B532630A2DDB086475D18
+:103DA000CA32C990AFB47835079CC7CC994F770C0D
+:103DB0009C75F39011FDDC0BA608F18309E7B12B8C
+:103DC000338F0DDCEC15FCB12F6FD37C2F917E9DD2
+:103DD000C841FE921D4C09234FEB8DA923DF225DC4
+:103DE0000B110FE1DA95EF9FA2381237564FFA31D7
+:103DF000BF7BE5A84971ABFA66FB1F7BED76B69DEC
+:103E000067FC9A4E4D9DF868295193B877EA629203
+:103E1000B837EEF767DAE1D4911DE48B73E2B7F2BD
+:103E20000863C43F7199FCAB3359E35236C9E97F4B
+:103E30009E7DAFC085D2DCA945E22A8199129CF60D
+:103E400061356F4F6A7D98CE8B85C05F4654CD4FEC
+:103E50001A3FE1FCACFBE433EBD83AAA9F74BFBE37
+:103E6000ACEDDFB8559943F3E546AC2A07DC0FEF1C
+:103E7000CF4B385FE99D70B8C26BF72CCBDCA76BDA
+:103E8000D2B7AB76DF4A9ADE351A4E6BAC5CC5E52D
+:103E9000F9FB70D1EA245D0769BFD3794EE70F5E65
+:103EA000BF702EA742E4ADFA1D10F99A4BF613B776
+:103EB000CFBF856D05C59277D25FF17FCC57DCBC53
+:103EC00090DE0D435CBC1B4A09F825827A39C6078F
+:103ED0002E10F3A055B228FD0F98077E9A078B6924
+:103EE0001E0C883EBFC953E738A379D023D60E48AD
+:103EF000EDD4E13AC19336F23769C6AA47EAF754DE
+:103F00008A7BA0843ABA4ACD13F5F591D76C47E97C
+:103F1000FD1666DE8326940FEBB57EDF6C8D8CE29A
+:103F2000FE748487F4686F303772B003F707D7CC1C
+:103F3000554288D334687C9D1631179EE05CAC53A3
+:103F40002D0591A315C48F7D8D710EB63C22EEF127
+:103F50000FEF4AE2BD989A0FEAB907160CD379A37E
+:103F60004BE8FB243D67F6D984BEC1466F91459C62
+:103F70001770928FE4F95FA2FC164B2A1F3E0404CF
+:103F8000DFA143DE22CAC7A12683E0DBCF7C2DED73
+:103F9000A4A7DAAAD0FB32D9623939A6A623CE96D5
+:103FA000D27B558D375DBFC30B64814B7968F2209E
+:103FB000BD434275E0EAA1F72BD5E1E24C7E9817AC
+:103FC0007361CFE4295D8F213DE62B5FCD571FFB49
+:103FD00077BEF2B57CB120D66D36E52D2AF0BFC98B
+:103FE000D53CEC9020998531495C711891FE91EF98
+:103FF0007F558DF342119DB71A93CB06E85DCCA196
+:1040000033FA803E0C519F8BF739DEA258E76D5A88
+:104010009DB7A5EBF18DFBEA313937772A4BAB47DA
+:1040200094FFDEE2EB237BBFB04BCB69F3FC5F5226
+:10403000F383ECECD5E6C89F467FBFE8F36385FFCA
+:1040400078679EF7FC504AF70CDC99984BF7CE99AD
+:104050003CDF3EE233CF4B19FC8467514A4FF124D9
+:104060005A7E2AA5F74C5BF04BD137FFD5CFB41F52
+:104070007F03DC4DE081B00C000000000000000078
+:1040800000000018000000000000000000000040D8
+:1040900000000000000000000000002800000000F8
+:1040A0000000000000000010000000000000000000
+:1040B00000000020000000000000000000000010D0
+:1040C00000000000000000000000000800000000E8
+:1040D00000000000000000000000000000000000E0
+:1040E00000000000000000000000000000000000D0
+:1040F00000000000000000000000000000000000C0
+:1041000000000000000000000000000000000000AF
+:10411000000000000000000000000000000000009F
+:10412000000000000000000000000000000000008F
+:10413000000000000000000000000000000000007F
+:10414000000000000000000000000000000000006F
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:10417000000000000000000000000000000000003F
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A000000000000000000000000000000000000F
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000000000000EF
+:1041D00000000000000000000000000000000000DF
+:1041E0000000000000000000000033280010000064
+:1041F0000000000800003330001000000000000242
+:1042000000003328001000000000001000003A7881
+:104210000000000000000008800000000000000016
+:10422000000000008000000000000000000000000E
+:1042300080000000000000000000000000003120AD
+:1042400000000000000000080000336000010004CE
+:1042500000000001000033680000000000000002C0
+:1042600000003370000000000000000800003374FC
+:10427000000000000000000200003A700000000092
+:104280000000000800003A4000080000000000089C
+:1042900000003D88004000000000004000003A504F
+:1042A000000800000000000800003A60000800005C
+:1042B0000000000800003A8800C8000000000098D4
+:1042C00000003C18009800000000002800003C5846
+:1042D00000980000000000280000337803600030E0
+:1042E0000000036000003EB0000800000000000174
+:1042F00000003EB10008000000000001000020089E
+:10430000001000000000001000002000000000006D
+:104310000000000880000000000000000000000015
+:10432000800000000000000000000000000000000D
+:10433000000000000000000000000000000000007D
+:10434000000000000000000000000000000000006D
+:10435000800000000000000000000000800000005D
+:1043600000000000000000008000000000000000CD
+:1043700000000000800000000000000000000000BD
+:10438000800000000000000000000000800000002D
+:10439000000000000000000080000000000000009D
+:1043A000000000008000000000000000000000008D
+:1043B00080000000000000000000000080000000FD
+:1043C000000000000000000080000000000000006D
+:1043D000000000008000000000000000000000005D
+:1043E000800000000000000000000000000000004D
+:1043F00000000000000000000000000000000000BD
+:1044000000000000000000000000000000000000AC
+:10441000000000000000000000000000000000009C
+:10442000000000000000000080000000000000000C
+:1044300000000000800000000000000000000000FC
+:1044400080000000000000000000000000000000EC
+:1044500000000000000000008000000000000000DC
+:1044600000000000800000000000000000000000CC
+:1044700080000000000000000000000000000000BC
+:10448000000000000000000000000000000000002C
+:10449000000000000000000000000000000000001C
+:1044A000000000000000000000000000000000000C
+:1044B00000000000000000000000000000000000FC
+:1044C00000000000000012C8008000000000008012
+:1044D000000000010000000000000000000040009B
+:1044E0000490000000000490000019C800000000C3
+:1044F0000000000800004948000800000000000813
+:1045000000004928000800000000000800004938A9
+:104510000008000000000008000020080010000053
+:104520000000001000002000000000000000000853
+:104530000000401004900040000000400000499836
+:104540000008000000000001000049990008000078
+:1045500000000001800000000000000000000000DA
+:10456000800000000000000000000000800000004B
+:1045700000000000000000008000000000000000BB
+:1045800000000000800000000000000000000000AB
+:10459000800000000000000000000000800000001B
+:1045A000000000000000000080000000000000008B
+:1045B000000000008000000000000000000000007B
+:1045C00080000000000000000000000080000000EB
+:1045D000000000000000000080000000000000005B
+:1045E000000000008000000000000000000000004B
+:1045F00000000000000000000000000000000000BB
+:1046000000000000000000000000000000000000AA
+:10461000000000000000000000000000000000009A
+:10462000000000000000000000000000800000000A
+:1046300000000000000000008000000000000000FA
+:10464000000000000000000000000000000000006A
+:10465000800000000000000000000000800000005A
+:1046600000000000000000008000000000000000CA
+:1046700000000000800000000000000000000000BA
+:104680000000400000180000000000180000430077
+:104690000040000000000040000043000040000215
+:1046A0000000000100004301004000020000000083
+:1046B00000003000004000000000004080000000CA
+:1046C0000000000000000000000030000008004072
+:1046D0000000000400003004000800400000000456
+:1046E00000004B00002800000000002800004B5094
+:1046F00000100000000000100000380000800000E2
+:104700000000008000003800000800800000000267
+:1047100000003900002000000000002000002008F8
+:104720000010000000000010000020000000000049
+:104730000000000800005108000800000000000808
+:104740000000512000080000000000080000513067
+:104750000008000000000008000051C00008000030
+:1047600000000001000051C100080000000000012D
+:10477000000039400010000400000004000051D087
+:104780000030001800000010000051D80030001860
+:104790000000000280000000000000000000000097
+:1047A0008000000000000000000000008000000009
+:1047B0000000000000000000800000000000000079
+:1047C0000000000080000000000000000000000069
+:1047D00080000000000000000000000080000000D9
+:1047E0000000000000000000800000000000000049
+:1047F0000000000080000000000000000000000039
+:1048000000000000000000000000000000000000A8
+:104810000000000000000000000000000000000098
+:104820000000000000000000000000000000000088
+:104830008000000000000000000000008000000078
+:104840000000000000000000000000000000000068
+:1048500000000000000023E800800000000000804D
+:10486000000000010000000000000000000020081F
+:1048700000100000000000100000200000000000F8
+:104880000000000800002DA0000800000000000843
+:1048900000002DB80008000000000008000024E817
+:1048A00002D00028000002D000002E5800080000AE
+:1048B0000000000100002E59000800000000000167
+:1048C00000002D900008000000000008800000009B
+:1048D0000000000000000000800000000000000058
+:1048E0000000000080000000000000000000000048
+:1048F00080000000000000000000000080000000B8
+:104900000000000000000000800000000000000027
+:104910000000000080000000000000000000000017
+:104920000000000000000000000000000000000087
+:104930000000000000000000000000000000000077
+:104940000000000000000000000000000000000067
+:104950008000000000000000000000008000000057
+:104960000000000000000000000000000000000047
+:1049700000000000800000000000000000000000B7
+:104980008000000000000000000000008000000027
+:104990000000000000000000800000000000000097
+:1049A000000000000000250000400000000000089A
+:1049B000000025080040000000000028000009C099
+:1049C000012000100000000880000000000000002E
+:1049D0000000000080000000000000000000000057
+:1049E0000000402002D00028000000080000300035
+:1049F00000000000000010000000509900000000BE
+:104A000000000001000050B00000000000000002A3
+:104A1000000045A000900008000000088000000091
+:104A200000000000000000000000296000080000F5
+:104A300000000001000029610008000000000001E2
+:104A4000000029700008000400000002000029781E
+:104A5000000800040000000400002FB0000800005F
+:104A60000000000400002FB4000800000000000453
+:104A700000002FC0000000000000000800002FC848
+:104A800000000000000000080000300000000000EE
+:104A90000000001000005040000100010000000173
+:104AA0000000500000000000000000200000080886
+:104AB00000100000000000040000080C00100000BE
+:104AC00000000001000008B7000000000000000125
+:104AD000000008B600000000000000010000100007
+:104AE000003000180000000400001004003000181E
+:104AF0000000000400001008003000180000000250
+:104B00000000100A00300018000000020000100C25
+:104B100000300018000000010000100D00300018E7
+:104B2000000000010000100E00300018000000011D
+:104B300000001010003000180000000400001014E5
+:104B40000030001800000004000030000100008068
+:104B50000008000400003004010000800008000488
+:104B60000000000A000000000000000000003068A3
+:104B70000100008000000001000030690100008099
+:104B8000000000010000306C010000800000000205
+:104B90000000306E01000080000000020000307054
+:104BA000010000800000000400003074010000805B
+:104BB00000000004000030660100008000000002D8
+:104BC000000030640100008000000001000030603F
+:104BD000010000800000000200003062010000803F
+:104BE00000000002000030500100008000000004BE
+:104BF0000000305401000080000000040000305824
+:104C000001000080000000040000305C0100008012
+:104C1000000000040000307C010000800000000162
+:104C20000000307D010000800000000100001C1821
+:104C3000001000000000000400001C300010000004
+:104C40000000000400001C380010000000000004F8
+:104C50008000000000000000000000008000000054
+:104C600000000000000000008000000000000000C4
+:104C700000000000800000000000000000000000B4
+:104C800000004C10000800000000000200004C1260
+:104C9000000800000000000200004C1400080000A2
+:104CA0000000000400004C20000800000000000884
+:104CB00000004C30004000080000000800004C00DC
+:104CC000000800000000000200004C020008000084
+:104CD0000000000100004C04000800000000000279
+:104CE00000004CD0000800000000000800004CE06C
+:104CF000000800000000000400004CE40008000070
+:104D00000000000100004CF000080000000000025C
+:104D100000004CF4000800000000000200004D00FC
+:104D20000008000000000004000050000010000017
+:104D30000000000400005004001000000000000407
+:104D400000005008001000000000000400001400E3
+:104D5000000800000000000200001402000800002B
+:104D60000000000100001404000800000000000220
+:104D700000001410000800000000000200001414DD
+:104D800000080000000000020000141600080000E7
+:104D900000000002000019B8000800000000000830
+:104DA000000014200008000000000002000014248D
+:104DB0000008000000000002000019C80008000000
+:104DC0000000000800002C10000800000000000196
+:104DD00000002C11000800000000000100002C124F
+:104DE000000800000000000100002C130008000073
+:104DF0000000000100002C0000080000000000027C
+:104E000000002C02000800000000000100002C043B
+:104E1000000800000000000200002C300008000024
+:104E20000000000200002C32000800000000000218
+:104E300000002C34000800000000000200002C20BC
+:104E4000000800000000000100002C210008000004
+:104E50000000000100002C220008000000000001FA
+:104E600000002C23000800000000000100002C249A
+:104E7000000800000000000100002C2500080000D0
+:104E80000000000100002C260008000000000001C6
+:104E900000001400000800000000000200001402DE
+:104EA00000080000000000010000140400080000D9
+:104EB000000000020000141200C0001800000002F0
+:104EC0000000141000C00018000000020000141CB4
+:104ED00000C00018000000080000141400C00018F2
+:104EE000000000080000142700C0001800000001A6
+:104EF0000000142400C00018000000020000142666
+:104F000000C000180000000100001590000800001B
+:104F100000000008000015A00008000000000008C4
+:104F2000000015B00008000000000008800000002C
+:104F300000000000000000008000000000000000F1
+:104F400000000000800000000000000000000000E1
+:104F50008000000000000000000000008000000051
+:104F600000000000000000008000000000000000C1
+:104F700000000000800000000000000000000000B1
+:104F80008000000000000000000000008000000021
+:104F90000000000000000000800000000000000091
+:104FA0000000000080000000000000000000000081
+:104FB00080000000000000000000000080000000F1
+:104FC0000000000000000000800000000000000061
+:104FD0000000000080000000000000000000000051
+:104FE00080000000000000000000000080000000C1
+:104FF0000000000000000000800000000000000031
+:105000000000000080000000000000000000000020
+:105010008000000000000000000000008000000090
+:105020000000000000000000800000000000000000
+:1050300000000000800000000000000000000000F0
+:105040008000000000000000000000008000000060
+:1050500000000000000000008000000000000000D0
+:105060000000000000000000000000000000000040
+:1050700080000000000000000000000000000000B0
+:08508000060209000000000017
+:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex
deleted file mode 100644
index 5f04df69e7c..00000000000
--- a/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex
+++ /dev/null
@@ -1,13181 +0,0 @@
-:1000000000004F48000000680000070C00004FB8D7
-:1000100000001ED4000056C800000094000075A027
-:1000200000009F4C00007638000000CC00011588CD
-:100030000000DC4C00011658000000940001F2A8FA
-:10004000000040000001F340000000A4000233481B
-:100050000000F38C000233F000000FFC0003278047
-:100060000000000400033780020400480000000F75
-:1000700002040054000000450204005C0000000679
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:10018000020400140000007F02040018000000FFB9
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200604203C0000001FBB
-:10024000020420B800000001060420BC0000005F8A
-:100250000204223807FFFFFF0204223C0000003F97
-:100260000204224007FFFFFF020422440000000FA7
-:1002700001042248000000000104224C000000009C
-:10028000010422500000000001042254000000007C
-:1002900001042258000000000104225C000000005C
-:1002A000010422600000000001042264000000003C
-:1002B00001042268000000000104226C000000001C
-:1002C00001042270000000000104227400000000FC
-:1002D00001042278000000000104227C00000000DC
-:1002E0000C042000000003E80A04200000000001C4
-:1002F0000B0420000000000A0605400000000D006D
-:100300000205004400000020020500480000003201
-:10031000020500900215002002050094021500203D
-:1003200002050098000000300205009C0810000043
-:10033000020500A000000033020500A40000003008
-:10034000020500A800000031020500AC0000000218
-:10035000020500B000000005020500B40000000620
-:10036000020500B800000002020500BC0000000207
-:10037000020500C000000000020500C400000005E6
-:10038000020500C800000002020500CC00000002C7
-:10039000020500D000000002020500D400000001A8
-:1003A00002050114000000010205011C000000010B
-:1003B0000205012000000002020502040000000105
-:1003C0000205020C0000004002050210000000407F
-:1003D0000205021C0000002002050220000000139C
-:1003E0000205022400000020060502400000000A69
-:1003F00004050280002000000205005000000007F4
-:10040000020500540000000702050058000000002B
-:100410000205005C00000008020500600000000109
-:100420000605006400000003020500D80000000675
-:1004300002050004000000010205000800000001A0
-:100440000205000C00000001020500100000000180
-:100450000205001400000001020500180000000160
-:100460000205001C00000001020500200000000140
-:100470000205002400000001020500280000000120
-:100480000205002C00000001020500300000000100
-:1004900002050034000000010205003800000001E0
-:1004A0000205003C000000010205004000000001C0
-:1004B000020500E00000000D020500E80000000059
-:1004C000020500F000000000020500F80000000036
-:1004D000020500E40000002D020500EC00000020F1
-:1004E000020500F400000020020500FC00000020CE
-:1004F000020500E00000001D020500E800000010F9
-:10050000020500F000000010020500F800000010D5
-:10051000020500E40000003D020500EC0000003090
-:10052000020500F400000030020500FC000000306D
-:10053000020500E00000004D020500E80000004058
-:10054000020500F000000040020500F80000004035
-:10055000020500E40000006D020500EC00000060F0
-:10056000020500F400000060020500FC00000060CD
-:10057000020500E00000005D020500E800000050F8
-:10058000020500F000000050020500F800000050D5
-:10059000020500E40000007D020500EC0000007090
-:1005A000020500F400000070020500FC000000706D
-:1005B0000406100002000020020600DC000000011A
-:1005C000010600D80000000004060200000302201B
-:1005D000020600DC00000000010600B80000000078
-:1005E000010600C8000000000206016C00000000C7
-:1005F000010600BC00000000010600CC0000000065
-:1006000002060170000000000718040000910000BD
-:10061000081807D800050223071C00002BF700006C
-:10062000071C80002DD10AFE071D00002F461673FF
-:10063000071D800016342245081DB13049DA022515
-:100640000118000000000000011800040000000074
-:1006500001180008000000000118000C0000000054
-:100660000118001000000000011800140000000034
-:1006700002180020000000010218002400000002FF
-:1006800002180028000000030218002C00000000DF
-:1006900002180030000000040218003400000001BD
-:1006A00002180038000000000218003C00000001A1
-:1006B000021800400000000402180044000000007E
-:1006C00002180048000000010218004C000000035E
-:1006D0000218005000000000021800540000000141
-:1006E00002180058000000040218005C000000001E
-:1006F00002180060000000010218006400000003FE
-:1007000002180068000000000218006C00000001E0
-:1007100002180070000000040218007400000000BD
-:1007200002180078000000040218007C000000039A
-:100730000618008000000002021800A400003FFF1D
-:10074000021800A8000003FF0218022400000000A5
-:1007500002180234000000000218024C00000000E1
-:10076000021802E4000000FF061810000000040058
-:10077000021B8BC000000001021B8000000000343F
-:10078000021B804000000018021B80800000000C4B
-:10079000021B80C0000000200C1B83000007A1206A
-:1007A0000A1B8300000001380B1B83000000138824
-:1007B0000A1B8340000000000C1B8340000001F472
-:1007C0000B1B834000000005021B83800007A12053
-:1007D000021B83C0000001F4021B14800000000112
-:1007E0000A1B148000000000061A1000000003B36A
-:1007F000041A1ECC00010227061A1ED000000008B1
-:10080000061A2008000000C8061A20000000000296
-:10081000041AAF4000100228061A3718000000041E
-:10082000061A371000000002061A500000000002ED
-:10083000061A500800000004061A501800000004B0
-:10084000061A502800000004061A50380000000460
-:10085000061A504800000004061A50580000000410
-:10086000061A506800000004061A507800000002C2
-:10087000041A52C000020238061A40500000000656
-:10088000041A40680002023A041A40400004023C84
-:10089000041A800000010240061A800400000003D0
-:1008A000041A801000010241061A8014000000039F
-:1008B000041A802000010242061A8024000000036E
-:1008C000041A803000010243061A8034000000033D
-:1008D000041A804000010244061A8044000000030C
-:1008E000041A805000010245061A805400000003DB
-:1008F000041A806000010246061A806400000003AA
-:10090000041A807000010247061A80740000000378
-:10091000041A808000010248061A80840000000347
-:10092000041A809000010249061A80940000000316
-:10093000041A80A00001024A061A80A400000003E5
-:10094000041A80B00001024B061A80B400000003B4
-:10095000041A80C00001024C061A80C40000000383
-:10096000041A80D00001024D061A80D40000000352
-:10097000041A80E00001024E061A80E40000000321
-:10098000041A80F00001024F061A80F400000003F0
-:10099000041A810000010250061A810400000003BD
-:1009A000041A811000010251061A8114000000038C
-:1009B000041A812000010252061A8124000000035B
-:1009C000041A813000010253061A8134000000032A
-:1009D000041A814000010254061A814400000003F9
-:1009E000041A815000010255061A815400000003C8
-:1009F000041A816000010256061A81640000000397
-:100A0000041A817000010257061A81740000000365
-:100A1000041A818000010258061A81840000000334
-:100A2000041A819000010259061A81940000000303
-:100A3000041A81A00001025A061A81A400000003D2
-:100A4000041A81B00001025B061A81B400000003A1
-:100A5000041A81C00001025C061A81C40000000370
-:100A6000041A81D00001025D061A81D4000000033F
-:100A7000041A81E00001025E061A81E4000000030E
-:100A8000041A81F00001025F061A81F400000003DD
-:100A9000041A820000010260061A820400000003AA
-:100AA000041A821000010261061A82140000000379
-:100AB000041A822000010262061A82240000000348
-:100AC000041A823000010263061A82340000000317
-:100AD000041A824000010264061A824400000003E6
-:100AE000041A825000010265061A825400000003B5
-:100AF000041A826000010266061A82640000000384
-:100B0000041A827000010267061A82740000000352
-:100B1000041A828000010268061A82840000000321
-:100B2000041A829000010269061A829400000003F0
-:100B3000041A82A00001026A061A82A400000003BF
-:100B4000041A82B00001026B061A82B4000000038E
-:100B5000041A82C00001026C061A82C4000000035D
-:100B6000041A82D00001026D061A82D4000000032C
-:100B7000041A82E00001026E061A82E400000003FB
-:100B8000041A82F00001026F061A82F400000003CA
-:100B9000041A830000010270061A83040000000397
-:100BA000041A831000010271061A83140000000366
-:100BB000041A832000010272061A83240000000335
-:100BC000041A833000010273061A83340000000304
-:100BD000041A834000010274061A834400000003D3
-:100BE000041A835000010275061A835400000003A2
-:100BF000041A836000010276061A83640000000371
-:100C0000041A837000010277061A8374000000033F
-:100C1000041A838000010278061A8384000000030E
-:100C2000041A839000010279061A839400000003DD
-:100C3000041A83A00001027A061A83A400000003AC
-:100C4000041A83B00001027B061A83B4000000037B
-:100C5000041A83C00001027C061A83C4000000034A
-:100C6000041A83D00001027D061A83D40000000319
-:100C7000041A83E00001027E061A83E400000003E8
-:100C8000041A83F00001027F061A83F400000003B7
-:100C9000041A840000010280061A84040000000384
-:100CA000041A841000010281061A84140000000353
-:100CB000041A842000010282061A84240000000322
-:100CC000041A843000010283061A843400000003F1
-:100CD000041A844000010284061A844400000003C0
-:100CE000041A845000010285061A8454000000038F
-:100CF000041A846000010286061A8464000000035E
-:100D0000041A847000010287061A8474000000032C
-:100D1000041A848000010288061A848400000003FB
-:100D2000041A849000010289061A849400000003CA
-:100D3000041A84A00001028A061A84A40000000399
-:100D4000041A84B00001028B061A84B40000000368
-:100D5000041A84C00001028C061A84C40000000337
-:100D6000041A84D00001028D061A84D40000000306
-:100D7000041A84E00001028E061A84E400000003D5
-:100D8000041A84F00001028F061A84F400000003A4
-:100D9000041A850000010290061A85040000000371
-:100DA000041A851000010291061A85140000000340
-:100DB000041A852000010292061A8524000000030F
-:100DC000041A853000010293061A853400000003DE
-:100DD000041A854000010294061A854400000003AD
-:100DE000041A855000010295061A8554000000037C
-:100DF000041A856000010296061A8564000000034B
-:100E0000041A857000010297061A85740000000319
-:100E1000041A858000010298061A858400000003E8
-:100E2000041A859000010299061A859400000003B7
-:100E3000041A85A00001029A061A85A40000000386
-:100E4000041A85B00001029B061A85B40000000355
-:100E5000041A85C00001029C061A85C40000000324
-:100E6000041A85D00001029D061A85D400000003F3
-:100E7000041A85E00001029E061A85E400000003C2
-:100E8000041A85F00001029F061A85F40000000391
-:100E9000041A8600000102A0061A8604000000035E
-:100EA000041A8610000102A1061A8614000000032D
-:100EB000041A8620000102A2061A862400000003FC
-:100EC000041A8630000102A3061A863400000003CB
-:100ED000041A8640000102A4061A8644000000039A
-:100EE000041A8650000102A5061A86540000000369
-:100EF000041A8660000102A6061A86640000000338
-:100F0000041A8670000102A7061A86740000000306
-:100F1000041A8680000102A8061A868400000003D5
-:100F2000041A8690000102A9061A869400000003A4
-:100F3000041A86A0000102AA061A86A40000000373
-:100F4000041A86B0000102AB061A86B40000000342
-:100F5000041A86C0000102AC061A86C40000000311
-:100F6000041A86D0000102AD061A86D400000003E0
-:100F7000041A86E0000102AE061A86E400000003AF
-:100F8000041A86F0000102AF061A86F4000000037E
-:100F9000041A8700000102B0061A8704000000034B
-:100FA000041A8710000102B1061A8714000000031A
-:100FB000041A8720000102B2061A872400000003E9
-:100FC000041A8730000102B3061A873400000003B8
-:100FD000041A8740000102B4061A87440000000387
-:100FE000041A8750000102B5061A87540000000356
-:100FF000041A8760000102B6061A87640000000325
-:10100000041A8770000102B7061A877400000003F3
-:10101000041A8780000102B8061A878400000003C2
-:10102000041A8790000102B9061A87940000000391
-:10103000041A87A0000102BA061A87A40000000360
-:10104000041A87B0000102BB061A87B4000000032F
-:10105000041A87C0000102BC061A87C400000003FE
-:10106000041A87D0000102BD061A87D400000003CD
-:10107000041A87E0000102BE061A87E4000000039C
-:10108000041A87F0000102BF061A87F4000000036B
-:10109000041A8800000102C0061A88040000000338
-:1010A000041A8810000102C1061A88140000000307
-:1010B000041A8820000102C2061A882400000003D6
-:1010C000041A8830000102C3061A883400000003A5
-:1010D000041A8840000102C4061A88440000000374
-:1010E000041A8850000102C5061A88540000000343
-:1010F000041A8860000102C6061A88640000000312
-:10110000041A8870000102C7061A887400000003E0
-:10111000041A8880000102C8061A888400000003AF
-:10112000041A8890000102C9061A8894000000037E
-:10113000041A88A0000102CA061A88A4000000034D
-:10114000041A88B0000102CB061A88B4000000031C
-:10115000041A88C0000102CC061A88C400000003EB
-:10116000041A88D0000102CD061A88D400000003BA
-:10117000041A88E0000102CE061A88E40000000389
-:10118000041A88F0000102CF061A88F40000000358
-:10119000041A8900000102D0061A89040000000325
-:1011A000041A8910000102D1061A891400000003F4
-:1011B000041A8920000102D2061A892400000003C3
-:1011C000041A8930000102D3061A89340000000392
-:1011D000041A8940000102D4061A89440000000361
-:1011E000041A8950000102D5061A89540000000330
-:1011F000041A8960000102D6061A896400000003FF
-:10120000041A8970000102D7061A897400000003CD
-:10121000041A8980000102D8061A8984000000039C
-:10122000041A8990000102D9061A8994000000036B
-:10123000041A89A0000102DA061A89A4000000033A
-:10124000041A89B0000102DB061A89B40000000309
-:10125000041A89C0000102DC061A89C400000003D8
-:10126000041A89D0000102DD061A89D400000003A7
-:10127000041A89E0000102DE061A89E40000000376
-:10128000041A89F0000102DF061A89F40000000345
-:10129000041A8A00000102E0061A8A040000000312
-:1012A000041A8A10000102E1061A8A1400000003E1
-:1012B000041A8A20000102E2061A8A2400000003B0
-:1012C000041A8A30000102E3061A8A34000000037F
-:1012D000041A8A40000102E4061A8A44000000034E
-:1012E000041A8A50000102E5061A8A54000000031D
-:1012F000041A8A60000102E6061A8A6400000003EC
-:10130000041A8A70000102E7061A8A7400000003BA
-:10131000041A8A80000102E8061A8A840000000389
-:10132000041A8A90000102E9061A8A940000000358
-:10133000041A8AA0000102EA061A8AA40000000327
-:10134000041A8AB0000102EB061A8AB400000003F6
-:10135000041A8AC0000102EC061A8AC400000003C5
-:10136000041A8AD0000102ED061A8AD40000000394
-:10137000041A8AE0000102EE061A8AE40000000363
-:10138000041A8AF0000102EF061A8AF40000000332
-:10139000041A8B00000102F0061A8B0400000003FF
-:1013A000041A8B10000102F1061A8B1400000003CE
-:1013B000041A8B20000102F2061A8B24000000039D
-:1013C000041A8B30000102F3061A8B34000000036C
-:1013D000041A8B40000102F4061A8B44000000033B
-:1013E000041A8B50000102F5061A8B54000000030A
-:1013F000041A8B60000102F6061A8B6400000003D9
-:10140000041A8B70000102F7061A8B7400000003A7
-:10141000041A8B80000102F8061A8B840000000376
-:10142000041A8B90000102F9061A8B940000000345
-:10143000041A8BA0000102FA061A8BA40000000314
-:10144000041A8BB0000102FB061A8BB400000003E3
-:10145000041A8BC0000102FC061A8BC400000003B2
-:10146000041A8BD0000102FD061A8BD40000000381
-:10147000041A8BE0000102FE061A8BE40000000350
-:10148000041A8BF0000102FF061A8BF4000000031F
-:10149000041A8C0000010300061A8C0400000003EB
-:1014A000041A8C1000010301061A8C1400000003BA
-:1014B000041A8C2000010302061A8C240000000389
-:1014C000041A8C3000010303061A8C340000000358
-:1014D000041A8C4000010304061A8C440000000327
-:1014E000041A8C5000010305061A8C5400000003F6
-:1014F000041A8C6000010306061A8C6400000003C5
-:10150000041A8C7000010307061A8C740000000393
-:10151000041A8C8000010308061A8C840000000362
-:10152000041A8C9000010309061A8C940000000331
-:10153000041A8CA00001030A061A8CA40000000300
-:10154000041A8CB00001030B061A8CB400000003CF
-:10155000041A8CC00001030C061A8CC4000000039E
-:10156000041A8CD00001030D061A8CD4000000036D
-:10157000041A8CE00001030E061A8CE4000000033C
-:10158000041A8CF00001030F061A8CF4000000030B
-:10159000041A8D0000010310061A8D0400000003D8
-:1015A000041A8D1000010311061A8D1400000003A7
-:1015B000041A8D2000010312061A8D240000000376
-:1015C000041A8D3000010313061A8D340000000345
-:1015D000041A8D4000010314061A8D440000000314
-:1015E000041A8D5000010315061A8D5400000003E3
-:1015F000041A8D6000010316061A8D6400000003B2
-:10160000041A8D7000010317061A8D740000000380
-:10161000041A8D8000010318061A8D84000000034F
-:10162000041A8D9000010319061A8D94000000031E
-:10163000041A8DA00001031A061A8DA400000003ED
-:10164000041A8DB00001031B061A8DB400000003BC
-:10165000041A8DC00001031C061A8DC4000000038B
-:10166000041A8DD00001031D061A8DD4000000035A
-:10167000041A8DE00001031E061A8DE40000000329
-:10168000041A8DF00001031F061A8DF400000003F8
-:10169000041A8E0000010320061A8E0400000003C5
-:1016A000041A8E1000010321061A8E140000000394
-:1016B000041A8E2000010322061A8E240000000363
-:1016C000041A8E3000010323061A8E340000000332
-:1016D000041A8E4000010324061A8E440000000301
-:1016E000041A8E5000010325061A8E5400000003D0
-:1016F000041A8E6000010326061A8E64000000039F
-:10170000041A8E7000010327061A8E74000000036D
-:10171000041A8E8000010328061A8E84000000033C
-:10172000041A8E9000010329061A8E94000000030B
-:10173000041A8EA00001032A061A8EA400000003DA
-:10174000041A8EB00001032B061A8EB400000003A9
-:10175000041A8EC00001032C061A8EC40000000378
-:10176000041A8ED00001032D061A8ED40000000347
-:10177000041A8EE00001032E061A8EE40000000316
-:10178000041A8EF00001032F061A8EF400000003E5
-:10179000041A8F0000010330061A8F0400000003B2
-:1017A000041A8F1000010331061A8F140000000381
-:1017B000041A8F2000010332061A8F240000000350
-:1017C000041A8F3000010333061A8F34000000031F
-:1017D000041A8F4000010334061A8F4400000003EE
-:1017E000041A8F5000010335061A8F5400000003BD
-:1017F000041A8F6000010336061A8F64000000038C
-:10180000041A8F7000010337061A8F74000000035A
-:10181000041A8F8000010338061A8F840000000329
-:10182000041A8F9000010339061A8F9400000003F8
-:10183000041A8FA00001033A061A8FA400000003C7
-:10184000041A8FB00001033B061A8FB40000000396
-:10185000041A8FC00001033C061A8FC40000000365
-:10186000041A8FD00001033D061A8FD40000000334
-:10187000041A8FE00001033E061A8FE400000007FF
-:10188000041A62C00020033F061AD0000000007254
-:10189000061AD24800000010061AD6B00000002038
-:1018A000061AD47000000090061AD46800000002E6
-:1018B000061AA000000001C4061A30000000001043
-:1018C000061A308000000010061A310000000010D7
-:1018D000061A318000000010061A330000000012C2
-:1018E000061A339000000070061AD4580000000257
-:1018F000061AD34800000002061AD3580000002040
-:10190000061AA710000001C4061A3040000000109B
-:10191000061A30C000000010061A31400000001006
-:10192000061A31C000000010061A334800000012E9
-:10193000061A355000000070061AD460000000023C
-:10194000061AD35000000002061AD3D80000002067
-:10195000021AAE2000000000061A5000000000022B
-:10196000061A508000000012041A40000002035FB3
-:10197000041A63C000020361061A7000000000042C
-:10198000061A320000000008021AAE24000000000F
-:10199000061A501000000002061A50C8000000127B
-:1019A000041A400800020363041A63C800020365B6
-:1019B000061A701000000004061A32200000000809
-:1019C000021AAE2800000000061A50200000000293
-:1019D000061A511000000012041A4010000203679A
-:1019E000041A63D000020369061A70200000000484
-:1019F000061A324000000008021AAE2C0000000057
-:101A0000061A503000000002061A51580000001259
-:101A1000041A40180002036B041A63D80002036D15
-:101A2000061A703000000004061A32600000000838
-:101A3000021AAE3000000000061A504000000002FA
-:101A4000061A51A000000012041A40200002036F81
-:101A5000041A63E000020371061A704000000004DB
-:101A6000061A328000000008021AAE34000000009E
-:101A7000061A505000000002061A51E80000001239
-:101A8000041A402800020373041A63E80002037575
-:101A9000061A705000000004061A32A00000000868
-:101AA000021AAE3800000000061A50600000000262
-:101AB000061A523000000012041A40300002037768
-:101AC000041A63F000020379061A70600000000433
-:101AD000061A32C000000008021AAE3C00000000E6
-:101AE000061A507000000002061A52780000001218
-:101AF000041A40380002037B041A63F80002037DD5
-:101B0000061A707000000004061A32E00000000897
-:101B10000200A468000B01C80200A294071D29114D
-:101B20000200A298000000000200A29C009C042475
-:101B30000200A2A0000000000200A2A4000002090E
-:101B40000200A270000000000200A2740000000069
-:101B50000200A270000000000200A2740000000059
-:101B60000200A270000000000200A2740000000049
-:101B70000200A270000000000200A2740000000039
-:101B8000020160A000000001020160A400000262E6
-:101B9000020160A800000002020160AC0000001811
-:101BA0000201620400000001020100B40000000113
-:101BB000020100B800000001020100DC0000000189
-:101BC0000201010000000001020101040000000107
-:101BD0000201007C003000000201008400000028A7
-:101BE0000201008C0000000002010130000000042E
-:101BF0000201025C00000001020103280000000055
-:101C0000020160580000FFFF020160700000000741
-:101C10000201608000000001020105540000003054
-:101C2000020100C400000001020100CC000000011C
-:101C3000020100F800000001020100F000000001B4
-:101C4000020100800030000002010088000000282E
-:101C500002010090000000000201013400000004B5
-:101C6000020102DC000000010201032C0000000060
-:101C70000201605C0000FFFF0201607400000007C9
-:101C800002016084000000010201056400000030D0
-:101C9000020100C800000001020100D000000001A4
-:101CA000020100FC00000001020100F4000000013C
-:101CB000020C100000000028020C20080000021195
-:101CC000020C200C00000200020C20100000020494
-:101CD000020C201C0000FFFF020C20200000FFFF70
-:101CE000020C20240000FFFF020C20280000FFFF50
-:101CF000020C203800000020020C203C00000021D3
-:101D0000020C204000000022020C204400000023AE
-:101D1000020C204800000024020C204C000000258A
-:101D2000020C205000000026020C20540000002766
-:101D3000020C205800000028020C205C0000002942
-:101D4000020C20600000002A020C20640000002B1E
-:101D5000020C20680000002C020C206C0000002DFA
-:101D6000020C20700000002E020C20740000002FD6
-:101D7000020C207800000010060C207C00000007F8
-:101D8000020C209800000011020C209C00000012A0
-:101D9000020C20A000000013060C20A40000001D6F
-:101DA000020C211800000001020C211C000000019F
-:101DB000020C212000000001060C21240000001D5F
-:101DC000020C219800000001060C219C0000000775
-:101DD000020C21B800000001020C21BC000000012F
-:101DE000020C21C000000001020C21C4000000010F
-:101DF000020C21C800000001020C21CC00000001EF
-:101E0000020C21D000000001020C21D400000001CE
-:101E1000020C21D800000001020C21DC00000001AE
-:101E2000020C21E000000001020C21E4000000018E
-:101E3000020C21E800000001020C21EC000000016E
-:101E4000020C21F000000001020C21F4000000014E
-:101E5000020C21F800000001060C21FC0000000724
-:101E6000020C221800000001060C221C00000007D2
-:101E7000020C223807FFFFFF020C223C0000003F4B
-:101E8000020C224007FFFFFF020C22440000000F5B
-:101E9000010C224800000000010C224C0000000050
-:101EA000010C225000000000010C22540000000030
-:101EB000010C225800000000010C225C0000000010
-:101EC000010C226000000000010C226400000000F0
-:101ED000010C226800000000010C226C00000000D0
-:101EE000010C227000000000010C227400000000B0
-:101EF000010C227800000000010C227C0000000090
-:101F00000C0C2000000003E80A0C20000000000177
-:101F10000B0C20000000000A020C40080000101109
-:101F2000020C400C00001000020C401000001004D5
-:101F3000020C401400001021020C401C0000FFFFA6
-:101F4000020C40200000FFFF020C40240000FFFFB5
-:101F5000020C40280000FFFF020C40380000004641
-:101F6000020C403C00000010060C40400000000243
-:101F7000020C404800000018020C404C000000F029
-:101F8000060C40500000001F020C40CC0000000175
-:101F9000060C40D00000003A020C41B800000001DD
-:101FA000060C41BC00000003020C41C80000000107
-:101FB000020C41CC00000001060C41D00000001AC8
-:101FC000020C423807FFFFFF020C423C0000003FBA
-:101FD000020C424007FFFFFF020C42440000000FCA
-:101FE000010C424800000000010C424C00000000BF
-:101FF000010C425000000000010C4254000000009F
-:10200000010C425800000000010C425C000000007E
-:10201000010C426000000000010C4264000000005E
-:10202000010C426800000000010C426C000000003E
-:10203000010C427000000000010C4274000000001E
-:10204000010C427800000000010C427C00000000FE
-:10205000010C4280000000000C0C4000000003E86E
-:102060000A0C4000000000010B0C40000000000AB8
-:10207000060D400000000A00020D0044000000327E
-:10208000020D008C02150020020D009002150020A8
-:10209000020D009408100000020D009800000033AB
-:1020A000020D009C00000002020D00A000000000D4
-:1020B000020D00A400000005020D00A800000005AC
-:1020C000060D00AC00000002020D00B4000000028A
-:1020D000020D00B800000003020D00BC0000000269
-:1020E000020D00C000000001020D00C80000000247
-:1020F000020D00CC00000002020D015C0000000196
-:10210000020D016400000001020D016800000002E0
-:10211000020D020400000001020D020C000000206C
-:10212000020D021000000040020D021400000040E9
-:10213000020D022000000003020D0224000000181E
-:10214000060D028000000012040D03000018037F3A
-:10215000060D03600000000C020D004C00000001A1
-:10216000020D005000000002020D005400000000AB
-:10217000020D005800000008060D005C000000047D
-:10218000020D00C400000004020D00040000000164
-:10219000020D000800000001020D000C000000010B
-:1021A000020D001000000001020D001400000001EB
-:1021B000020D001800000001020D001C00000001CB
-:1021C000020D002000000001020D002400000001AB
-:1021D000020D002800000001020D002C000000018B
-:1021E000020D003000000001020D0034000000016B
-:1021F000020D003800000001020D003C000000014B
-:10220000020D011400000009020D011C0000000A6B
-:10221000020D012400000000020D012C000000004E
-:10222000020D013400000000020D013C0000000B13
-:10223000020D014400000000020D011800000029F9
-:10224000020D01200000002A020D012800000020DC
-:10225000020D013000000020020D013800000020B6
-:10226000020D01400000002B020D0148000000207B
-:10227000020D011400000019020D011C0000001ADB
-:10228000020D012400000010020D012C00000010BE
-:10229000020D013400000010020D013C0000001B83
-:1022A000020D014400000010020D01180000003969
-:1022B000020D01200000003A020D0128000000304C
-:1022C000020D013000000030020D01380000003026
-:1022D000020D01400000003B020D014800000030EB
-:1022E000020D011400000049020D011C0000004A0B
-:1022F000020D012400000040020D012C00000040EE
-:10230000020D013400000040020D013C0000004BB2
-:10231000020D014400000040020D01180000006998
-:10232000020D01200000006A020D0128000000607B
-:10233000020D013000000060020D01380000006055
-:10234000020D01400000006B020D0148000000601A
-:10235000020D011400000059020D011C0000005A7A
-:10236000020D012400000050020D012C000000505D
-:10237000020D013400000050020D013C0000005B22
-:10238000020D014400000050020D01180000007908
-:10239000020D01200000007A020D012800000070EB
-:1023A000020D013000000070020D013800000070C5
-:1023B000020D01400000007B020D0148000000708A
-:1023C000060E200000000800020E004C0000003243
-:1023D000020E009402150020020E00980215002043
-:1023E000020E009C00000030020E00A00810000049
-:1023F000020E00A400000033020E00A8000000300E
-:10240000020E00AC00000031020E00B0000000021D
-:10241000020E00B400000004020E00B8000000002C
-:10242000020E00BC00000002020E00C0000000020C
-:10243000020E00C400000000020E00C800000002EE
-:10244000020E00CC00000007020E00D000000002C7
-:10245000020E00D400000002020E00D800000001AD
-:10246000020E014400000001020E014C00000001B8
-:10247000020E015000000002020E020400000001E2
-:10248000020E020C00000040020E0210000000408C
-:10249000020E021C00000004020E022000000020B8
-:1024A000020E02240000000E020E02280000001B93
-:1024B000060E030000000012040E0280001B0397AA
-:1024C000060E02EC00000005020E00540000000C95
-:1024D000020E00580000000C020E005C000000001C
-:1024E000020E006000000010020E006400000010E8
-:1024F000060E006800000003020E00DC000000036E
-:10250000020E000400000001020E0008000000019D
-:10251000020E000C00000001020E0010000000017D
-:10252000020E001400000001020E0018000000015D
-:10253000020E001C00000001020E0020000000013D
-:10254000020E002400000001020E0028000000011D
-:10255000020E002C00000001020E003000000001FD
-:10256000020E003400000001020E003800000001DD
-:10257000020E003C00000001020E004000000001BD
-:10258000020E004400000001020E01100000000FC6
-:10259000020E011800000000020E012000000000E1
-:1025A000020E012800000000020E01140000002F9E
-:1025B000020E011C00000020020E01240000000099
-:1025C000020E012C00000000020E01100000001F8E
-:1025D000020E011800000010020E01200000000091
-:1025E000020E012800000000020E01140000003F4E
-:1025F000020E011C00000030020E01240000000049
-:10260000020E012C00000000020E01100000004F1D
-:10261000020E011800000040020E01200000000020
-:10262000020E012800000000020E01140000006FDD
-:10263000020E011C00000060020E012400000000D8
-:10264000020E012C00000000020E01100000005FCD
-:10265000020E011800000050020E012000000000D0
-:10266000020E012800000000020E01140000007F8D
-:10267000020E011C00000070020E01240000000088
-:10268000020E012C000000000730040000C9000009
-:10269000083007D8000503B20734000033320000C9
-:1026A0000734800030A70CCD07350000353518F70A
-:1026B000073580002A6226450736000018D330DE31
-:1026C00008364660373403B40130000000000000D3
-:1026D000013000040000000001300008000000008C
-:1026E0000130000C0000000001300010000000006C
-:1026F0000130001400000000023000200000000142
-:102700000230002400000002023000280000000314
-:102710000230002C000000000230003000000004F5
-:1027200002300034000000010230003800000000D8
-:102730000230003C000000010230004000000004B4
-:102740000230004400000000023000480000000198
-:102750000230004C00000003023000500000000076
-:102760000230005400000001023000580000000454
-:102770000230005C00000000023000600000000138
-:102780000230006400000003023000680000000016
-:102790000230006C000000010230007000000004F4
-:1027A00002300074000000000230007800000004D5
-:1027B0000230007C000000030630008000000002B0
-:1027C000023000A400003FFF023000A8000003FF19
-:1027D0000230022400000000023002340000000039
-:1027E0000230024C00000000023002E40000FFFF53
-:1027F000063020000000080002338BC000000001FA
-:10280000023380000000001A023380400000004EB6
-:102810000233808000000010023380C000000020DE
-:102820000C3383000007A1200A3383000000013825
-:102830000B338300000013880A338340000000003C
-:102840000C338340000001F40B338340000000058B
-:10285000023383800007A120023383C0000001F40B
-:1028600002331480000000010A33148000000000CD
-:10287000063280000000010206322008000000C875
-:10288000063220000000000204328EA0001003B6C1
-:1028900006323EB00000000606323ED800000002BC
-:1028A00006323E800000000A04323EA8000203C641
-:1028B00006323E00000000200632500000000400F6
-:1028C0000632400000000004043274C0000203C855
-:1028D00006324110000000020632D0000000003035
-:1028E0000632DD40000000440632DA00000000D06D
-:1028F0000632DEA0000000020632E0000000080000
-:1029000006328450000001180632100000000188D1
-:102910000632500000000020063251000000002066
-:102920000632520000000020063253000000002052
-:10293000063254000000002006325500000000203E
-:10294000063256000000002006325700000000202A
-:102950000632580000000020063259000000002016
-:1029600006325A000000002006325B000000002002
-:1029700006325C000000002006325D0000000020EE
-:1029800006325E000000002006325F0000000020DA
-:1029900006328DF00000000204328E00000203CAED
-:1029A00006328E08000000020632DE9000000002AF
-:1029B00006321C4000000038063288B000000118C2
-:1029C00006321620000001880632508000000020E8
-:1029D00006325180000000200632528000000020A4
-:1029E0000632538000000020063254800000002090
-:1029F000063255800000002006325680000000207C
-:102A00000632578000000020063258800000002067
-:102A1000063259800000002006325A800000002053
-:102A200006325B800000002006325C80000000203F
-:102A300006325D800000002006325E80000000202B
-:102A400006325F800000002006328DF80000000290
-:102A500004328E10000203CC06328E1800000002F1
-:102A60000632DE980000000206321D200000003809
-:102A700002328D50000000000632401000000002BB
-:102A800002328D5400000000063240200000000297
-:102A900002328D5800000000063240300000000273
-:102AA00002328D5C0000000006324040000000024F
-:102AB00002328D600000000006324050000000022B
-:102AC00002328D6400000000063240600000000207
-:102AD00002328D68000000000632407000000002E3
-:102AE00002328D6C000000000632408000000002BF
-:102AF000072004000091000008200780001003CE8A
-:102B0000072400002AF300000724800015090ABDED
-:102B10000824A9F0692803D001200000000000006B
-:102B20000120000400000000012000080000000057
-:102B30000120000C00000000012000100000000037
-:102B4000012000140000000002200020000000010D
-:102B500002200024000000020220002800000003E0
-:102B60000220002C000000000220003000000004C1
-:102B700002200034000000010220003800000000A4
-:102B80000220003C00000001022000400000000480
-:102B90000220004400000000022000480000000164
-:102BA0000220004C00000003022000500000000042
-:102BB0000220005400000001022000580000000420
-:102BC0000220005C00000000022000600000000104
-:102BD00002200064000000030220006800000000E2
-:102BE0000220006C000000010220007000000004C0
-:102BF00002200074000000000220007800000004A1
-:102C00000220007C0000000306200080000000027B
-:102C1000022000A400003FFF022000A8000003FFE4
-:102C20000220022400000000022002340000000004
-:102C30000220024C00000000022002E40000FFFF1E
-:102C4000062020000000080002238BC000000001C5
-:102C500002238000000000100223804000000012C8
-:102C60000223808000000030022380C00000000E9C
-:102C70000C2383000007A1200A23830000000138F1
-:102C80000B238300000013880A2383400000000008
-:102C90000C238340000001F40B2383400000000557
-:102CA000022383800007A120022383C0000001F4D7
-:102CB00002231480000000010A2314800000000099
-:102CC000062210000000004206222008000000C872
-:102CD00006222000000000020622B000000000C60C
-:102CE0000422B318000503D20622B32C0000000B07
-:102CF0000422B358000503D70622B36C0000000B72
-:102D00000422B398000503DC0622B3AC0000000BDC
-:102D10000422B3D8000503E10622B3EC0000000B47
-:102D20000422B418000503E60622B42C0000000BB0
-:102D30000422B458000503EB0622B46C0000000B1B
-:102D40000422B498000503F00622B4AC0000000B86
-:102D50000422B4D8000503F50622B4EC0000000BF1
-:102D60000422B518000503FA0622B52C0000000B5A
-:102D70000422B558000503FF0622B56C0000000BC5
-:102D80000422B598000504040622B5AC0000000B2F
-:102D90000422B5D8000504090622B5EC0000000B9A
-:102DA0000422B6180005040E0622B62C0000000B03
-:102DB0000422B658000504130622B66C0000000B6E
-:102DC0000422B698000504180622B6AC0000000BD9
-:102DD0000422B6D80005041D0622B6EC0000000B44
-:102DE0000422B718000504220622B72C0000000BAD
-:102DF0000422B758000504270622B76C0000000B18
-:102E00000422B7980005042C0622B7AC0000000B82
-:102E10000422B7D8000504310622B7EC0000000BED
-:102E20000422B818000504360622B82C0000000B56
-:102E30000422B8580005043B0622B86C0000000BC1
-:102E40000422B898000504400622B8AC0000000B2C
-:102E50000422B8D8000504450622B8EC0000000B97
-:102E60000422B9180005044A0622B92C0000000B00
-:102E70000422B9580005044F0622B96C0000000B6B
-:102E80000422B998000504540622B9AC0000000BD6
-:102E90000422B9D8000504590622B9EC0000000B41
-:102EA0000422BA180005045E0622BA2C0000000BAA
-:102EB0000422BA58000504630622BA6C0000000B15
-:102EC0000422BA98000504680622BAAC0000000B80
-:102ED0000422BAD80005046D0622BAEC00000005F1
-:102EE0000622BB00000000530422BC4C0001047207
-:102EF0000622BC50000000030422BC5C00010473E5
-:102F00000622BC60000000030422BC6C00010474B3
-:102F10000622BC70000000030422BC7C0001047582
-:102F20000622BC80000000030422BC8C0001047651
-:102F30000622BC90000000030422BC9C0001047720
-:102F40000622BCA0000000030422BCAC00010478EF
-:102F50000622BCB0000000030422BCBC00010479BE
-:102F60000622880000000100062280000000020006
-:102F7000042212700010047A06223000000000C003
-:102F800006226700000001000622900000000400F5
-:102F900004226B080020048A022212C0FFFFFFFFF8
-:102FA000062211E800000002062212C800000009F3
-:102FB000062212EC0000000906228C000000000826
-:102FC0000222114800000000062213200000000623
-:102FD000062233000000000206226040000000309C
-:102FE00006228C20000000080222114C0000000084
-:102FF00006221338000000060622330800000002F3
-:10300000062261000000003006228C40000000080B
-:10301000022211500000000006221350000000069A
-:103020000622331000000002062261C000000030BA
-:1030300006228C60000000080222115400000000EB
-:103040000622136800000006062233180000000262
-:10305000062262800000003006228C8000000008FA
-:103060000222115800000000062213800000000612
-:1030700006223320000000020622634000000030D8
-:1030800006228CA0000000080222115C0000000053
-:1030900006221398000000060622332800000002D2
-:1030A000062264000000003006228CC000000008E8
-:1030B0000222116000000000062213B0000000068A
-:1030C0000622333000000002062264C000000030F7
-:1030D00006228CE0000000080222116400000000BB
-:1030E000062213C800000006062233380000000242
-:1030F0000622658000000030021610000000002843
-:1031000002170008000000020217002C0000000354
-:103110000217003C000000040217004800000002F3
-:103120000217004C000000900217005000000090B1
-:103130000217005400800090021700580810000089
-:10314000021700600000008A02170064000000807F
-:1031500002170068000000810217006C0000008068
-:10316000021700700000000602170078000007D068
-:103170000217007C0000076C02170038007C100466
-:10318000021700040000000F061640240000000291
-:10319000021640700000001C0216420800000001E8
-:1031A0000216421000000001021642200000000139
-:1031B0000216422800000001021642300000000101
-:1031C00002164238000000010216426000000002B0
-:1031D0000C16401C0003D0900A16401C0000009CF6
-:1031E0000B16401C000009C4021640300000000805
-:1031F000021640340000000C021640380000001097
-:1032000002164044000000200216400000000001A9
-:10321000021640D80000000102164008000000011C
-:103220000216400C000000010216401000000001D0
-:103230000216424000000000021642480000000052
-:103240000616427000000002021642500000000004
-:1032500002164258000000000616428000000002DC
-:1032600002166008000012240216600C0000121002
-:1032700002166010000012140216601C0000FFFF0E
-:10328000021660200000FFFF021660240000FFFF0E
-:10329000021660280000FFFF0216603800000020C0
-:1032A0000216603C0000002006166040000000028C
-:1032B00002166048000000230216604C0000002443
-:1032C000021660500000002502166054000000261F
-:1032D00002166058000000270216605C00000029FA
-:1032E000021660600000002A021660640000002BD5
-:1032F000021660680000002C0216606C0000002DB1
-:1033000002166070000000EC0216607400000011EC
-:1033100002166078000000120616607C0000000FA4
-:10332000021660B800000001021660BC0000000137
-:10333000061660C00000000C021660F000000001DC
-:10334000061660F400000031021661B800000001AA
-:10335000061661BC0000000D021661F000000001BD
-:10336000061661F4000000110216623807FFFFFF25
-:103370000216623C0000003F0216624007FFFFFF9A
-:10338000021662440000000F0116624800000000AF
-:103390000116624C0000000001166250000000009F
-:1033A000011662540000000001166258000000007F
-:1033B0000116625C0000000001166260000000005F
-:1033C000011662640000000001166268000000003F
-:1033D0000116626C0000000001166270000000001F
-:1033E00001166274000000000116627800000000FF
-:1033F0000116627C000000000C166000000003E86B
-:103400000A166000000000010B1660000000000AB0
-:1034100002168040000000060216804400000005ED
-:10342000021680480000000A0216804C00000005C9
-:103430000216805400000002021680CC0000000436
-:10344000021680D000000004021680D400000004A0
-:10345000021680D800000004021680DC0000000480
-:10346000021680E000000004021680E40000000460
-:10347000021680E800000004021688040000000420
-:10348000021680300000007C021680340000003DEF
-:10349000021680380000003F0216803C0000009CAD
-:1034A000021680F000000007061680F400000005F8
-:1034B0000216880C010101010216810800000000BB
-:1034C0000216810C000000040216811000000004A6
-:1034D0000216811400000002021688100801200460
-:1034E00002168118000000050216811C000000056C
-:1034F000021681200000000502168124000000054C
-:103500000216882C200810010216812800000008ED
-:103510000216812C00000006021681300000000710
-:1035200002168134000000000216883001010120DB
-:1035300006168138000000040216883401010101DA
-:1035400002168148000000000216814C00000004B1
-:10355000021681500000000402168154000000028F
-:103560000216883808012004021681580000000560
-:103570000216815C00000005021681600000000553
-:1035800002168164000000050216883C2008100124
-:1035900002168168000000080216816C0000000617
-:1035A00002168170000000070216817400000001FD
-:1035B00002168840010101200216817800000001F6
-:1035C0000216817C000000010216818000000001CB
-:1035D00002168184000000010216884401010101E5
-:1035E00002168188000000010216818C0000000490
-:1035F000021681900000000402168194000000026F
-:10360000021688480801200402168198000000056F
-:103610000216819C00000005021681A00000000532
-:10362000021681A40000000502168814200810016B
-:10363000021681A800000008021681AC00000006F6
-:10364000021681B000000007021681B400000001DC
-:103650000216881801010120021681B8000000013D
-:10366000021681BC00000001021681C000000001AA
-:10367000021681C4000000010216881C010101012C
-:10368000021681C800000001021681CC000000046F
-:10369000021681D000000004021681D4000000024E
-:1036A0000216882008012004021681D800000005B7
-:1036B000021681DC00000005021681E00000000512
-:1036C000021681E40000000502168824200810017B
-:1036D000021681E800000008021681EC00000006D6
-:1036E000021681F0000000070216E40C0000000042
-:1036F00002168828010101200616E41000000004CB
-:103700000216E000010101010216E42000000000A1
-:103710000216E424000000040216E428000000045D
-:103720000216E42C000000020216E0040801200446
-:103730000216E430000000050216E4340000000523
-:103740000216E438000000050216E43C0000000503
-:103750000216E008200810010216E44000000008EC
-:103760000216E444000000060216E44800000007C8
-:103770000216E44C000000000216E00C01010120DA
-:103780000616E450000000040216E01001010101D9
-:103790000216E460000000000216E4640000000469
-:1037A0000216E468000000040216E46C0000000247
-:1037B0000216E014080120040216E470000000055F
-:1037C0000216E474000000050216E478000000050B
-:1037D0000216E47C000000050216E0182008100123
-:1037E0000216E480000000080216E48400000006CF
-:1037F0000216E488000000070216E48C00000001B5
-:103800000216E01C010101200216E49000000001F4
-:103810000216E494000000010216E4980000000182
-:103820000216E49C000000010216E02001010101E3
-:103830000216E4A0000000010216E4A40000000447
-:103840000216E4A8000000040216E4AC0000000226
-:103850000216E024080120040216E4B0000000056E
-:103860000216E4B4000000050216E4B800000005EA
-:103870000216E4BC000000050216E0282008100132
-:103880000216E4C0000000080216E4C400000006AE
-:103890000216E4C8000000070216E4CC0000000194
-:1038A0000216E02C010101200216E4D00000000104
-:1038B0000216E4D4000000010216E4D80000000162
-:1038C0000216E4DC000000010216E03001010101F3
-:1038D0000216E4E0000000010216E4E40000000427
-:1038E0000216E4E8000000040216E4EC0000000206
-:1038F0000216E034080120040216E4F0000000057E
-:103900000216E4F4000000050216E4F800000005C9
-:103910000216E4FC000000050216E0382008100141
-:103920000216E500000000080216E504000000068B
-:103930000216E508000000070216E03C0101012024
-:1039400002168240003F003F021682440000000041
-:103950000216E524003F003F0216E52800000000A3
-:1039600002168248000000000216824C003F003F11
-:103970000216E52C000000000216E530003F003F73
-:10398000021682500100010002168254010001005B
-:103990000216E534010001000216E53801000100BD
-:1039A00006168258000000020216E53C00000000E6
-:1039B0000216E540000000000216826000C000C050
-:1039C0000216826400C000C00216E54400C000C0B8
-:1039D0000216E54800C000C0021682681E001E00E4
-:1039E0000216826C1E001E000216E54C1E001E0010
-:1039F0000216E5501E001E000216827040004000B4
-:103A000002168274400040000216E5544000400057
-:103A10000216E558400040000216827880008000BF
-:103A20000216827C800080000216E55C8000800027
-:103A30000216E560800080000216828020002000CF
-:103A400002168284200020000216E5642000200077
-:103A50000216E56820002000061682880000000299
-:103A60000216E56C000000000216E5700000000080
-:103A700002168290000000000216829400000000EE
-:103A80000216E574000000000216E5780000000050
-:103A900002168298000000000216829C00000000BE
-:103AA0000216E57C000000000216E5800000000020
-:103AB000021682A000000000021682A4000000018D
-:103AC000061682A80000000A021681F400000C0805
-:103AD000021681F800000040021681FC000001007F
-:103AE0000216820000000020021682040000001767
-:103AF00002168208000000800216820C00000200FC
-:103B000002168210000000000216821801FF01FF59
-:103B10000216821401FF01FF0216E51001FF01FFEA
-:103B20000216E50C01FF01FF0216823C00000013A3
-:103B3000021680900000013F0216806000000140E4
-:103B40000216806400000140061680680000000232
-:103B500002168070000000C0061680740000000786
-:103B60000216809C00000048021680A00000004859
-:103B7000061680A400000002021680AC0000004877
-:103B8000061680B000000007021682380000800090
-:103B900002168234000025E40216809400007FFFA4
-:103BA00002168220000F000F0216821C000F000F69
-:103BB0000216E518000F000F0216E514000F000FA3
-:103BC000021682280000000002168224FFFFFFFF79
-:103BD0000216E520000000000216E51CFFFFFFFFB3
-:103BE0000216E6BC000000000216E6C0000000025B
-:103BF0000216E6C4000000010216E6C80000000339
-:103C00000216E6CC000000040216E6D00000000612
-:103C10000216E6D4000000050216E6D800000007F0
-:103C2000021680EC000000FF0214000000000001FA
-:103C30000214000C0000000102140040000000010A
-:103C40000214004400007FFF0214000C000000007A
-:103C500002140000000000000214006C00000000CC
-:103C600002140004000000010214003000000001F2
-:103C700002140004000000000214005C00000000B8
-:103C800002140008000000010214003400000001CA
-:103C90000214000800000000021400600000000090
-:103CA00006028000000020000202005800000032DE
-:103CB000020200A003150020020200A40315002048
-:103CC000020200A801000030020200AC081000004F
-:103CD000020200B000000033020200B40000003015
-:103CE000020200B800000031020200BC0000000324
-:103CF000020200C000000006020200C4000000032F
-:103D0000020200C800000003020200CC0000000212
-:103D1000020200D000000000020200D400000002F5
-:103D2000020200DC00000000020200E000000006C9
-:103D3000020200E400000004020200E800000002A9
-:103D4000020200EC00000002020200F0000000018C
-:103D5000020200FC00000006020201200000000038
-:103D60000202013400000002020201B00000000162
-:103D70000202020C00000001020202140000000115
-:103D80000202021800000002020204040000000106
-:103D90000202040C00000040020204100000004077
-:103DA0000202041C000000040202042000000020A3
-:103DB0000202042400000002020204280000002085
-:103DC000060205000000001204020480002004AA7C
-:103DD000020200600000000F020200640000000701
-:103DE00002020068000000000202006C0000000EE9
-:103DF000020200700000000E0602007400000003C2
-:103E0000020200F4000000040202000400000001AD
-:103E100002020008000000010202000C0000000184
-:103E20000202001000000001020200140000000164
-:103E300002020018000000010202001C0000000144
-:103E40000202002000000001020200240000000124
-:103E500002020028000000010202002C0000000104
-:103E600002020030000000010202003400000001E4
-:103E700002020038000000010202003C00000001C4
-:103E800002020040000000010202004400000001A4
-:103E900002020048000000010202004C0000000184
-:103EA000020200500000000102020108000000C8E8
-:103EB0000202011800000002020201C4000000001A
-:103EC000020201CC00000000020201D40000000246
-:103ED000020201DC00000002020201E4000000FF17
-:103EE000020201EC000000FF0202010000000000DD
-:103EF0000202010C000000C80202011C00000002C6
-:103F0000020201C800000000020201D0000000000F
-:103F1000020201D800000002020201E000000002DB
-:103F2000020201E8000000FF020201F0000000FFB1
-:103F3000020201040000000002020108000000C8A3
-:103F40000202011800000002020201C40000000089
-:103F5000020201CC00000000020201D400000002B5
-:103F6000020201DC00000002020201E4000000FF86
-:103F7000020201EC000000FF02020100000000004C
-:103F80000202010C000000C80202011C0000000235
-:103F9000020201C800000000020201D0000000007F
-:103FA000020201D800000002020201E0000000024B
-:103FB000020201E8000000FF020201F0000000FF21
-:103FC000020201040000000002020108000000C813
-:103FD0000202011800000002020201C400000000F9
-:103FE000020201CC00000000020201D40000000225
-:103FF000020201DC00000002020201E4000000FFF6
-:10400000020201EC000000FF0202010000000000BB
-:104010000202010C000000C80202011C00000002A4
-:10402000020201C800000000020201D000000000EE
-:10403000020201D800000002020201E000000002BA
-:10404000020201E8000000FF020201F0000000FF90
-:10405000020201040000000002020108000000C882
-:104060000202011800000002020201C40000000068
-:10407000020201CC00000000020201D40000000294
-:10408000020201DC00000002020201E4000000FF65
-:10409000020201EC000000FF02020100000000002B
-:1040A0000202010C000000C80202011C0000000214
-:1040B000020201C800000000020201D0000000005E
-:1040C000020201D800000002020201E0000000022A
-:1040D000020201E8000000FF020201F0000000FF00
-:1040E00002020104000000000728040000A00000F4
-:1040F000082807B8000904CA072C000034DA0000B9
-:10410000072C800038F80D37072D000037B91B76D3
-:10411000072D800031782965072E00001C7A35C4F0
-:10412000082E48E036E404CC01280000000000001E
-:104130000128000400000000012800080000000021
-:104140000128000C00000000012800100000000001
-:1041500001280014000000000228002000000001D7
-:1041600002280024000000020228002800000003AA
-:104170000228002C0000000002280030000000048B
-:10418000022800340000000102280038000000006E
-:104190000228003C0000000102280040000000044A
-:1041A000022800440000000002280048000000012E
-:1041B0000228004C0000000302280050000000000C
-:1041C00002280054000000010228005800000004EA
-:1041D0000228005C000000000228006000000001CE
-:1041E00002280064000000030228006800000000AC
-:1041F0000228006C0000000102280070000000048A
-:10420000022800740000000002280078000000046A
-:104210000228007C00000003062800800000000245
-:10422000022800A400003FFF022800A8000003FFAE
-:1042300002280224000000000228023400000000CE
-:104240000228024C00000000022802E40000FFFFE8
-:104250000628200000000800022B8BC0000000018F
-:10426000022B800000000000022B8040000000189C
-:10427000022B80800000000C022B80C00000006632
-:104280000C2B83000007A1200A2B830000000138BB
-:104290000B2B8300000013880A2B834000000000D2
-:1042A0000C2B8340000001F40B2B83400000000521
-:1042B000022B83800007A120022B83C0000001F4A1
-:1042C000022B1480000000010A2B14800000000063
-:1042D000062A9AF800000004042A9B08000204CE73
-:1042E000062A9B1000000006062A90800000004865
-:1042F000062A2008000000C8062A2000000000024C
-:10430000062A91A800000086062A900000000020DE
-:10431000062A93C800000003042A93D4000104D0A5
-:10432000062A9DA800000002042A9498000404D1E3
-:10433000042A9D58000104D5062A9D5C0000001146
-:10434000042ACB20001004D6042A3000000204E620
-:10435000062A300800000100062A40400000001034
-:10436000042A4000001004E8042A8408000204F82B
-:10437000062A9DA000000002062AB000000000509E
-:10438000062ABB7000000070062AB150000000022F
-:10439000062ABB6000000004062AD00000000800C6
-:1043A000062AC00000000150062A94A8000000322E
-:1043B000062A502000000002062A503000000002A9
-:1043C000062A500000000002062A501000000002D9
-:1043D000022A520800000001042A9B28000204FA65
-:1043E000062A963800000022042A96C0000104FC28
-:1043F000062A96C400000003062A976800000022DF
-:10440000042A97F0000104FD062A97F40000000337
-:10441000062A989800000022042A9920000104FE30
-:10442000062A992400000003062A99C800000022E9
-:10443000042A9A50000104FF062A9A54000000033F
-:10444000062AB14000000002062AC54000000150C3
-:10445000062A957000000032062A5028000000024B
-:10446000062A503800000002062A50080000000208
-:10447000062A501800000002022A520C0000000117
-:10448000042A9B3000020500062A96D00000002274
-:10449000042A975800010502062A975C00000003D1
-:1044A000062A980000000022042A988800010503CB
-:1044B000062A988C00000003062A9930000000228A
-:1044C000042A99B800010504062A99BC00000003DB
-:1044D000062A9A6000000022042A9AE800010505D5
-:1044E000062A9AEC00000003062AB14800000002E8
-:1044F000022ACA8000000000042A9B38001005062A
-:10450000062A50480000000E022ACA84000000005B
-:10451000042A9B7800100516062A50800000000E21
-:10452000022ACA8800000000042A9BB80010052651
-:10453000062A50B80000000E022ACA8C00000000B3
-:10454000042A9BF800100536062A50F00000000EE1
-:10455000022ACA9000000000042A9C380010054678
-:10456000062A51280000000E022ACA94000000000A
-:10457000042A9C7800100556062A51600000000E9F
-:10458000022ACA9800000000042A9CB800100566A0
-:10459000062A51980000000E022ACA9C0000000062
-:1045A000042A9CF800100576062A51D00000000E5F
-:1045B000021010080000000102101050000000015D
-:1045C000021010000003D000021010040000003D93
-:1045D0000910180002000586091011000010078656
-:1045E0000610114000000008091011600010079625
-:1045F000061011A00000001806102400000000E0C2
-:104600000210201C00000000021020200000000109
-:10461000021020C00000000202102004000000016F
-:10462000021020080000000109103C00000507A648
-:1046300009103800000507AB09103820000507B045
-:1046400006104C000000010002104028000000107D
-:104650000210404400003FFF0210405800280000B4
-:10466000021040840084924A02104058000000006A
-:104670000210800000001080021080AC00000000DA
-:1046800002108038000000100210810000000000BD
-:10469000061081200000000202108008000002B510
-:1046A0000210801000000000061082000000004A86
-:1046B000021081080001FFFF061081400000000287
-:1046C0000210800000001A800610900000000024F4
-:1046D000061091200000004A061093700000004A66
-:1046E000061095C00000004A0210800400001080EF
-:1046F000021080B0000000010210803C0000001099
-:104700000210810400000000061081280000000251
-:104710000210800C000002B502108014000000009E
-:10472000061084000000004A0210810C0001FFFF07
-:1047300006108148000000020210800400001A8068
-:104740000610909000000024061092480000004AD5
-:10475000061094980000004A061096E80000004AEF
-:104760000210800000001080021080AC00000002E7
-:1047700002108038000000100210810000000000CC
-:10478000061081200000000202108008000002B51F
-:104790000210801000000000061082000000004A95
-:1047A000021081080001FFFF061081400000000296
-:1047B0000210800000001A80061090000000002403
-:1047C000061091200000004A061093700000004A75
-:1047D000061095C00000004A0210800400001080FE
-:1047E000021080B0000000030210803C00000010A6
-:1047F0000210810400000000061081280000000261
-:104800000210800C000002B50210801400000000AD
-:10481000061084000000004A0210810C0001FFFF16
-:1048200006108148000000020210800400001A8077
-:104830000610909000000024061092480000004AE4
-:10484000061094980000004A061096E80000004AFE
-:104850000210800000001080021080AC00000004F4
-:1048600002108038000000100210810000000000DB
-:10487000061081200000000202108008000002B52E
-:104880000210801000000000061082000000004AA4
-:10489000021081080001FFFF0610814000000002A5
-:1048A0000210800000001A80061090000000002412
-:1048B000061091200000004A061093700000004A84
-:1048C000061095C00000004A02108004000010800D
-:1048D000021080B0000000050210803C00000010B3
-:1048E0000210810400000000061081280000000270
-:1048F0000210800C000002B50210801400000000BD
-:10490000061084000000004A0210810C0001FFFF25
-:1049100006108148000000020210800400001A8086
-:104920000610909000000024061092480000004AF3
-:10493000061094980000004A061096E80000004A0D
-:104940000210800000001080021080AC0000000601
-:1049500002108038000000100210810000000000EA
-:10496000061081200000000202108008000002B53D
-:104970000210801000000000061082000000004AB3
-:10498000021081080001FFFF0610814000000002B4
-:104990000210800000001A80061090000000002421
-:1049A000061091200000004A061093700000004A93
-:1049B000061095C00000004A02108004000010801C
-:1049C000021080B0000000070210803C00000010C0
-:1049D000021081040000000006108128000000027F
-:1049E0000210800C000002B50210801400000000CC
-:1049F000061084000000004A0210810C0001FFFF35
-:104A000006108148000000020210800400001A8095
-:104A10000610909000000024061092480000004A02
-:104A2000061094980000004A061096E80000004A1C
-:104A3000021205B0000000010212049000E383405E
-:104A40000212051400003C100212066C0000000166
-:104A5000021206700000000002120494FFFFFFFF24
-:104A600002120498FFFFFFFF0212049CFFFFFFFFEA
-:104A7000021204A0FFFFFFFF021204A4FFFFFFFFCA
-:104A8000021204A8FFFFFFFF021204ACFFFFFFFFAA
-:104A9000021204B0FFFFFFFF021204BCFFFFFFFF82
-:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
-:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
-:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
-:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
-:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
-:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
-:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
-:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
-:104B200002120504FFFFFFFF02120508FFFFFFFF4F
-:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
-:104B4000021204D4FF809000021204B4F00050005E
-:104B5000021204B8F00010000212039000000008D6
-:104B60000212039C00000008021203A000000008CB
-:104B7000021203A400000002021203BC00000004A1
-:104B8000021203C000000005021203C4000000046A
-:104B9000021203D0000000000212036C00000001AA
-:104BA000021203680000003F021201BC0000004036
-:104BB000021201C000001808021201C4000008031C
-:104BC000021201C800000803021201CC00000040DC
-:104BD000021201D000000003021201D400000803F9
-:104BE000021201D800000803021201DC00000803D1
-:104BF000021201E000010003021201E400000803B8
-:104C0000021201E800000803021201EC0000000398
-:104C1000021201F000000003021201F40000000380
-:104C2000021201F800000003021201FC0000000360
-:104C3000021202000000000302120204000000033E
-:104C400002120208000000030212020C000000031E
-:104C500002120210000000030212021400000003FE
-:104C600002120218000000030212021C00000003DE
-:104C700002120220000000030212022400000003BE
-:104C800002120228000024030212022C0000002F4E
-:104C90000212023000000009021202340000001962
-:104CA00002120238000001840212023C000001835B
-:104CB0000212024000000306021202440000001922
-:104CC00002120248000000060212024C0000030615
-:104CD00002120250000003060212025400000306F2
-:104CE0000212025800000C860212025C0000030649
-:104CF00002120260000003060212026400000006B5
-:104D000002120268000000060212026C0000000697
-:104D10000212027000000006021202740000000677
-:104D200002120278000000060212027C0000000657
-:104D30000212028000000006021202840000000637
-:104D400002120288000000060212028C0000000617
-:104D500002120290000000060212029400000006F7
-:104D600002120298000000060212029C00000006D7
-:104D7000021202A000000306021202A400000013A7
-:104D8000021202A800000006021202B00000100485
-:104D9000021202B400001004021203240010644046
-:104DA0000212032800106440021205B40000000142
-:104DB000021201B0000000010600A0000000000C7B
-:104DC0000200A050000000000200A05400000000FB
-:104DD0000200A0EC555400000200A0F055555555B6
-:104DE0000200A0F4000055550200A0F8F0000000F9
-:104DF0000200A0FC555400000200A1005555555575
-:104E00000200A104000055550200A108F0000000B6
-:104E10000200A18C555400000200A1905555555533
-:104E20000200A194000055550200A198F000000076
-:104E30000200A19C000000000200A1A000010000EF
-:104E40000200A1A4000050140200A1A8000000006C
-:104E50000200A45C00000C000200A61C000000037D
-:104E60000200A06CFF5C00000200A070FFF55FFF75
-:104E70000200A0740000FFFF0200A078F00003E031
-:104E80000200A07C000000000200A0800000A00042
-:104E90000600A084000000050200A0980FE00000BA
-:104EA0000600A09C000000070200A0B8000004005B
-:104EB0000600A0BC000000030200A0C80000100013
-:104EC0000600A0CC000000030200A0D800004000B3
-:104ED0000600A0DC000000030200A0E800010000C2
-:104EE0000600A22C000000040200A10CFF5C0000E0
-:104EF0000200A110FFF55FFF0200A1140000FFFFF8
-:104F00000200A118F00003E00200A11C0000000054
-:104F10000200A1200000A0000600A124000000055E
-:104F20000200A1380FE000000600A13C00000007CD
-:104F30000200A158000008000600A15C0000000368
-:104F40000200A168000020000600A16C0000000320
-:104F50000200A178000080000600A17C0000000390
-:104F60000200A188000200000600A23C000000042C
-:104F70000200A030000000000200A0340000000089
-:104F80000200A038000000000200A03C0000000069
-:104F90000200A040000000000200A0440000000049
-:104FA0000200A048000000000200A04C0000000029
-:104FB00000000000000000000000003000000000C1
-:104FC00000000000000000000000000000000000E1
-:104FD00000000000000000000000000000000000D1
-:104FE0000000000000300031000000000000000060
-:104FF00000000000000000000000000000000000B1
-:1050000000000000000000000000000000000000A0
-:10501000003100520000000000000000000000000D
-:105020000000000000000000000000000000000080
-:105030000000000000000000000000000052008995
-:1050400000000000000000000089008D008D00912C
-:1050500000910095009500990099009D009D00A188
-:1050600000A100A500A500A900A900AE00AE00B1F6
-:1050700000B100B4000000000000000000000000CB
-:105080000000000000000000000000000000000020
-:105090000000000000B40309030903130313031DF8
-:1050A000031D03240324032B032B03320332033990
-:1050B00003390340034003470347034E034E0355A0
-:1050C00000000000000000000000000000000000E0
-:1050D00000000000000000000000000000000000D0
-:1050E00000000000000000000000000000000000C0
-:1050F00000000000000000000000000000000000B0
-:10510000000000000000000000000000000000009F
-:10511000000000000000000000000000000000008F
-:10512000000000000000000000000000000000007F
-:10513000000000000000000000000000000000006F
-:10514000000000000000000000000000000000005F
-:10515000000000000000000000000000000000004F
-:10516000000000000000000000000000000000003F
-:105170000355035B0000000000000000035B035CBC
-:10518000035C035D035D035E035E035F035F036017
-:1051900003600361036103620362036300000000B4
-:1051A00000000000000000000000000000000000FF
-:1051B00000000000000000000000000000000000EF
-:1051C00000000000000000000363036D036D037B1B
-:1051D000037B0389000000000000000000000000C5
-:1051E00000000000000000000000000000000000BF
-:1051F00000000000000000000000000000000000AF
-:10520000000000000000000000000000000000009E
-:10521000000000000000000000000000000000008E
-:105220000389038A00000000000000000000000065
-:10523000000000000000000000000000000000006E
-:10524000000000000000000000000000038A03D6F8
-:10525000000000000000000000000000000000004E
-:10526000000000000000000000000000000000003E
-:10527000000000000000000003D604010000000050
-:10528000000000000000000000000000000000001E
-:10529000000000000000000000000000000000000E
-:1052A00000000000040104330000000000000000C2
-:1052B0000433043A043A0441044104480448044FC6
-:1052C000044F04560456045D045D04640464046BD6
-:1052D000046B04A4000000000000000004A404A863
-:1052E00004A804AC04AC04B004B004B404B404B81E
-:1052F00004B804BC04BC04C004C004C404C4051342
-:105300000513052A052A05410541054305430545C1
-:1053100005450547054705490549054B054B054D1D
-:10532000054D054F054F0551055105E805E805E90F
-:1053300005E905EA05EA05EF05EF05F405F405F9C9
-:1053400005F905FE05FE0603060306080608060D18
-:10535000060D0612061206130000000000000000F1
-:10536000000000000000000000000000000000003D
-:10537000000000000000000000000000000000002D
-:1053800006130624000000000000000000000000DA
-:10539000000000000000000000000000000000000D
-:1053A0000000000000000000000000000624063994
-:1053B0000639063C063C063F0000000000000000E5
-:1053C00000000000000000000000000000000000DD
-:1053D0000000000000000000063F0675000000000D
-:1053E00000000000000000000000000000000000BD
-:1053F00000000000000000000000000000000000AD
-:1054000000000000067507780000000000000000A2
-:10541000000000000000000000000000000000008C
-:10542000000000000000000000000000000000007C
-:105430000778077F077F078307830787000000003F
-:10544000000000000000000000000000000000005C
-:10545000000000000000000000000000078707C8EF
-:10546000000000000000000007C807D107D107DADC
-:1054700007DA07E307E307EC07EC07F507F507FE94
-:1054800007FE080708070810081008670867087C67
-:10549000087C089108910894089408970897089A3E
-:1054A000089A089D089D08A008A008A308A308A6BC
-:1054B00008A608A908A908B2000000000000000022
-:1054C00000000000000000000000000000000000DC
-:1054D00000000000000000000000000000000000CC
-:1054E00008B208B800000000000000000000000042
-:1054F00000000000000000000000000000000000AC
-:1055000000000000000000000000000008B808BB18
-:10551000000000000000000000000000000000008B
-:10552000000000000000000000000000000000007B
-:10553000000000000000000008BB08C100000000DF
-:10554000000000000000000000000000000000005B
-:10555000000000000000000000000000000000004B
-:10556000000000000000000000000000000000003B
-:1055700008C108D008D008DF08DF08EE08EE08FDF3
-:1055800008FD090C090C091B091B092A092A0939FC
-:10559000093909AA00000000000000000000000016
-:1055A00000000000000000000000000000000000FB
-:1055B00000000000000000000000000009AA09BF70
-:1055C00009BF09D009D009E109E109E209E209E3CB
-:1055D00009E309E409E409E509E509E609E609E75B
-:1055E00009E709E809E809E90000000000000000F7
-:1055F00000000000000000000000000000000000AB
-:10560000000000000000000000000000000000009A
-:10561000000000000000000000000000000000008A
-:10562000000000000000000000000000000000007A
-:10563000000000000000000000000000000000006A
-:10564000000000000000000000000000000000005A
-:10565000000000000000000000000000000000004A
-:10566000000000000000000000000000000000003A
-:10567000000000000000000000000000000000002A
-:10568000000000000000000000000000000000001A
-:10569000000000000000000000000000000000000A
-:1056A00000000000000000000000000000000000FA
-:1056B00000000000000000000000000000000000EA
-:1056C000000000000000000000010000000204C013
-:1056D0000003098000040E4000051300000617C0F7
-:1056E00000071C800008214000092600000A2AC08B
-:1056F000000B2F80000C3440000D3900000E3DC01F
-:10570000000F42800010474000114C00001250C0B2
-:105710000013558000145A4000155F00001663C046
-:105720000017688000186D4000197200001A76C0DA
-:10573000001B7B80001C8040001D8500001E89C06E
-:10574000001F8E80000093400000200000004000F9
-:1057500000006000000080000000A0000000C00009
-:105760000000E000000100000001200000014000F6
-:1057700000016000000180000001A0000001C000E5
-:105780000001E000000200000002200000024000D2
-:1057900000026000000280000002A0000002C000C1
-:1057A0000002E000000300000003200000034000AE
-:1057B00000036000000380000003A0000003C0009D
-:1057C0000003E0000004000000042000000440008A
-:1057D00000046000000480000004A0000004C00079
-:1057E0000004E00000050000000520000005400066
-:1057F00000056000000580000005A0000005C00055
-:105800000005E00000060000000620000006400041
-:1058100000066000000680000006A0000006C00030
-:105820000006E0000007000000072000000740001D
-:1058300000076000000780000007A0000007C0000C
-:105840000007E000000800000008200000084000F9
-:1058500000086000000880000008A0000008C000E8
-:105860000008E000000900000009200000094000D5
-:1058700000096000000980000009A0000009C000C4
-:105880000009E000000A0000000A2000000A4000B1
-:10589000000A6000000A8000000AA000000AC000A0
-:1058A000000AE000000B0000000B2000000B40008D
-:1058B000000B6000000B8000000BA000000BC0007C
-:1058C000000BE000000C0000000C2000000C400069
-:1058D000000C6000000C8000000CA000000CC00058
-:1058E000000CE000000D0000000D2000000D400045
-:1058F000000D6000000D8000000DA000000DC00034
-:10590000000DE000000E0000000E2000000E400020
-:10591000000E6000000E8000000EA000000EC0000F
-:10592000000EE000000F0000000F2000000F4000FC
-:10593000000F6000000F8000000FA000000FC000EB
-:10594000000FE000001000000010200000104000D8
-:1059500000106000001080000010A0000010C000C7
-:105960000010E000001100000011200000114000B4
-:1059700000116000001180000011A0000011C000A3
-:105980000011E00000120000001220000012400090
-:1059900000126000001280000012A0000012C0007F
-:1059A0000012E0000013000000132000001340006C
-:1059B00000136000001380000013A0000013C0005B
-:1059C0000013E00000140000001420000014400048
-:1059D00000146000001480000014A0000014C00037
-:1059E0000014E00000150000001520000015400024
-:1059F00000156000001580000015A0000015C00013
-:105A00000015E000001600000016200000164000FF
-:105A100000166000001680000016A0000016C000EE
-:105A20000016E000001700000017200000174000DB
-:105A300000176000001780000017A0000017C000CA
-:105A40000017E000001800000018200000184000B7
-:105A500000186000001880000018A0000018C000A6
-:105A60000018E00000190000001920000019400093
-:105A700000196000001980000019A0000019C00082
-:105A80000019E000001A0000001A2000001A40006F
-:105A9000001A6000001A8000001AA000001AC0005E
-:105AA000001AE000001B0000001B2000001B40004B
-:105AB000001B6000001B8000001BA000001BC0003A
-:105AC000001BE000001C0000001C2000001C400027
-:105AD000001C6000001C8000001CA000001CC00016
-:105AE000001CE000001D0000001D2000001D400003
-:105AF000001D6000001D8000001DA000001DC000F2
-:105B0000001DE000001E0000001E2000001E4000DE
-:105B1000001E6000001E8000001EA000001EC000CD
-:105B2000001EE000001F0000001F2000001F4000BA
-:105B3000001F6000001F8000001FA000001FC000A9
-:105B4000001FE00000200000002020000020400096
-:105B500000206000002080000020A0000020C00085
-:105B60000020E00000210000002120000021400072
-:105B700000216000002180000021A0000021C00061
-:105B80000021E0000022000000222000002240004E
-:105B900000226000002280000022A0000022C0003D
-:105BA0000022E0000023000000232000002340002A
-:105BB00000236000002380000023A0000023C00019
-:105BC0000023E00000240000002420000024400006
-:105BD00000246000002480000024A0000024C000F5
-:105BE0000024E000002500000025200000254000E2
-:105BF00000256000002580000025A0000025C000D1
-:105C00000025E000002600000026200000264000BD
-:105C100000266000002680000026A0000026C000AC
-:105C20000026E00000270000002720000027400099
-:105C300000276000002780000027A0000027C00088
-:105C40000027E00000280000002820000028400075
-:105C500000286000002880000028A0000028C00064
-:105C60000028E00000290000002920000029400051
-:105C700000296000002980000029A0000029C00040
-:105C80000029E000002A0000002A2000002A40002D
-:105C9000002A6000002A8000002AA000002AC0001C
-:105CA000002AE000002B0000002B2000002B400009
-:105CB000002B6000002B8000002BA000002BC000F8
-:105CC000002BE000002C0000002C2000002C4000E5
-:105CD000002C6000002C8000002CA000002CC000D4
-:105CE000002CE000002D0000002D2000002D4000C1
-:105CF000002D6000002D8000002DA000002DC000B0
-:105D0000002DE000002E0000002E2000002E40009C
-:105D1000002E6000002E8000002EA000002EC0008B
-:105D2000002EE000002F0000002F2000002F400078
-:105D3000002F6000002F8000002FA000002FC00067
-:105D4000002FE00000300000003020000030400054
-:105D500000306000003080000030A0000030C00043
-:105D60000030E00000310000003120000031400030
-:105D700000316000003180000031A0000031C0001F
-:105D80000031E0000032000000322000003240000C
-:105D900000326000003280000032A0000032C000FB
-:105DA0000032E000003300000033200000334000E8
-:105DB00000336000003380000033A0000033C000D7
-:105DC0000033E000003400000034200000344000C4
-:105DD00000346000003480000034A0000034C000B3
-:105DE0000034E000003500000035200000354000A0
-:105DF00000356000003580000035A0000035C0008F
-:105E00000035E0000036000000362000003640007B
-:105E100000366000003680000036A0000036C0006A
-:105E20000036E00000370000003720000037400057
-:105E300000376000003780000037A0000037C00046
-:105E40000037E00000380000003820000038400033
-:105E500000386000003880000038A0000038C00022
-:105E60000038E0000039000000392000003940000F
-:105E700000396000003980000039A0000039C000FE
-:105E80000039E000003A0000003A2000003A4000EB
-:105E9000003A6000003A8000003AA000003AC000DA
-:105EA000003AE000003B0000003B2000003B4000C7
-:105EB000003B6000003B8000003BA000003BC000B6
-:105EC000003BE000003C0000003C2000003C4000A3
-:105ED000003C6000003C8000003CA000003CC00092
-:105EE000003CE000003D0000003D2000003D40007F
-:105EF000003D6000003D8000003DA000003DC0006E
-:105F0000003DE000003E0000003E2000003E40005A
-:105F1000003E6000003E8000003EA000003EC00049
-:105F2000003EE000003F0000003F2000003F400036
-:105F3000003F6000003F8000003FA000003FC00025
-:105F4000003FE000003FE00100000000000001FF12
-:105F50000000020000007FF800007FF80000014010
-:105F600000003500000000010000FF0000000000FC
-:105F70000000FF00000000000000FF000000000023
-:105F80000000FF00000000000000FF000000000013
-:105F90000000FF00000000000000FF000000000003
-:105FA0000000FF000000000000000000140AFF00D5
-:105FB00000000001000000000020100100000000AF
-:105FC0000100900000000100000090020000900419
-:105FD00000009006000090080000900A0000900C5D
-:105FE0000000900E0000901000009012000090142D
-:105FF00000009016000090180000901A0000901CFD
-:106000000000901E000090200000902200009024CC
-:1060100000009026000090280000902A0000902C9C
-:106020000000902E0000903000009032000090346C
-:1060300000009036000090380000903A0000903C3C
-:106040000000903E0000904000009042000090440C
-:1060500000009046000090480000904A0000904CDC
-:106060000000904E000090500000905200009054AC
-:1060700000009056000090580000905A0000905C7C
-:106080000000905E0000906000009062000090644C
-:1060900000009066000090680000906A0000906C1C
-:1060A0000000906E000090700000907200009074EC
-:1060B00000009076000090780000907A0000907CBC
-:1060C0000000907E0000908000009082000090848C
-:1060D00000009086000090880000908A0000908C5C
-:1060E0000000908E0000909000009092000090942C
-:1060F00000009096000090980000909A0000909CFC
-:106100000000909E000090A0000090A2000090A4CB
-:10611000000090A6000090A8000090AA000090AC9B
-:10612000000090AE000090B0000090B2000090B46B
-:10613000000090B6000090B8000090BA000090BC3B
-:10614000000090BE000090C0000090C2000090C40B
-:10615000000090C6000090C8000090CA000090CCDB
-:10616000000090CE000090D0000090D2000090D4AB
-:10617000000090D6000090D8000090DA000090DC7B
-:10618000000090DE000090E0000090E2000090E44B
-:10619000000090E6000090E8000090EA000090EC1B
-:1061A000000090EE000090F0000090F2000090F4EB
-:1061B000000090F6000090F8000090FA000090FCBB
-:1061C000000090FE00009100000091020000910488
-:1061D00000009106000091080000910A0000910C57
-:1061E0000000910E00009110000091120000911427
-:1061F00000009116000091180000911A0000911CF7
-:106200000000911E000091200000912200009124C6
-:1062100000009126000091280000912A0000912C96
-:106220000000912E00009130000091320000913466
-:1062300000009136000091380000913A0000913C36
-:106240000000913E00009140000091420000914406
-:1062500000009146000091480000914A0000914CD6
-:106260000000914E000091500000915200009154A6
-:1062700000009156000091580000915A0000915C76
-:106280000000915E00009160000091620000916446
-:1062900000009166000091680000916A0000916C16
-:1062A0000000916E000091700000917200009174E6
-:1062B00000009176000091780000917A0000917CB6
-:1062C0000000917E00009180000091820000918486
-:1062D00000009186000091880000918A0000918C56
-:1062E0000000918E00009190000091920000919426
-:1062F00000009196000091980000919A0000919CF6
-:106300000000919E000091A0000091A2000091A4C5
-:10631000000091A6000091A8000091AA000091AC95
-:10632000000091AE000091B0000091B2000091B465
-:10633000000091B6000091B8000091BA000091BC35
-:10634000000091BE000091C0000091C2000091C405
-:10635000000091C6000091C8000091CA000091CCD5
-:10636000000091CE000091D0000091D2000091D4A5
-:10637000000091D6000091D8000091DA000091DC75
-:10638000000091DE000091E0000091E2000091E445
-:10639000000091E6000091E8000091EA000091EC15
-:1063A000000091EE000091F0000091F2000091F4E5
-:1063B000000091F6000091F8000091FA000091FCB5
-:1063C000000091FEFFFFFFFFFFFFFFFFFFFFFFFF4A
-:1063D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
-:1063E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
-:1063F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
-:10640000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
-:10641000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
-:10642000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
-:10643000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
-:10644000FFFFFFFF0000000300BEBC2000000000B3
-:10645000000000050000000300BEBC20000000009A
-:10646000000000050000000300BEBC20000000008A
-:10647000000000050000000300BEBC20000000007A
-:10648000000000050000000300BEBC20000000006A
-:10649000000000050000000300BEBC20000000005A
-:1064A000000000050000000300BEBC20000000004A
-:1064B000000000050000000300BEBC20000000003A
-:1064C0000000000500002000000040C000006180C6
-:1064D000000082400000A3000000C3C00000E48070
-:1064E0000001054000012600000146C00001678050
-:1064F000000188400001A9000001C9C00001EA8034
-:1065000000020B4000022C0000024CC000026D8013
-:1065100000028E400002AF000002CFC00002F080F7
-:10652000000011400000800000010380000187008E
-:1065300000020A8000028E00000311800003950013
-:106540000004188000049C0000051F800005A300C3
-:10655000000626800006AA0000072D800007B10073
-:10656000000834800008B80000093B800009BF0023
-:10657000000A4280000AC600000B4980000BCD00D3
-:10658000000C5080000CD400000D578000005B0010
-:1065900000007FF800007FF8000000D50000150023
-:1065A0000000FF00000000000000FF0000000000ED
-:1065B0000000FF00000000000000FF0000000000DD
-:1065C0000000FF00000000000000FF0000000000CD
-:1065D0000000FF00000000000000FF0000000000BD
-:1065E000000019000000000000000000FFFFFFFF96
-:1065F0000000000003938700000000000393870061
-:1066000000007FF800007FF80000068E00003500D3
-:106610000000FF000FFFFFFF0000FF000FFFFFFF64
-:10662000000000FF0000FF000FFFFFFF0000FF0061
-:106630000FFFFFFF000000FF0000FF000FFFFFFF44
-:106640000000FF000FFFFFFF000000FF0000FF0041
-:106650000FFFFFFF0000FF000FFFFFFF000000FF24
-:106660000000FF000FFFFFFF0000FF000FFFFFFF14
-:10667000000000FF0000FF000FFFFFFF0000FF0011
-:106680000FFFFFFF000000FF0000FF000FFFFFFFF4
-:106690000000FF000FFFFFFF000000FF0000FF00F1
-:1066A0000FFFFFFF0000FF000FFFFFFF000000FFD4
-:1066B0000000FF000FFFFFFF0000FF000FFFFFFFC4
-:1066C000000000FF0000FF000FFFFFFF0000FF00C1
-:1066D0000FFFFFFF000000FF0000FF000FFFFFFFA4
-:1066E0000000FF000FFFFFFF000000FF0000FF00A1
-:1066F0000FFFFFFF0000FF000FFFFFFF000000FF84
-:106700000000FF000FFFFFFF0000FF000FFFFFFF73
-:10671000000000FF0000FF000FFFFFFF0000FF0070
-:106720000FFFFFFF000000FF0000FF000FFFFFFF53
-:106730000000FF000FFFFFFF000000FF0000FF0050
-:106740000FFFFFFF0000FF000FFFFFFF000000FF33
-:106750000000FF000FFFFFFF0000FF000FFFFFFF23
-:10676000000000FF0000FF000FFFFFFF0000FF0020
-:106770000FFFFFFF000000FF0000FF000FFFFFFF03
-:106780000000FF000FFFFFFF000000FF0000FF0000
-:106790000FFFFFFF0000FF000FFFFFFF000000FFE3
-:1067A0000000FF000FFFFFFF0000FF000FFFFFFFD3
-:1067B000000000FF0000FF000FFFFFFF0000FF00D0
-:1067C0000FFFFFFF000000FF0000FF000FFFFFFFB3
-:1067D0000000FF000FFFFFFF000000FF0000FF00B0
-:1067E0000FFFFFFF0000FF000FFFFFFF000000FF93
-:1067F0000000FF000FFFFFFF0000FF000FFFFFFF83
-:10680000000000FF0000FF000FFFFFFF0000FF007F
-:106810000FFFFFFF000000FF0000FF000FFFFFFF62
-:106820000000FF000FFFFFFF000000FF0000FF005F
-:106830000FFFFFFF0000FF000FFFFFFF000000FF42
-:106840000000FF000FFFFFFF0000FF000FFFFFFF32
-:10685000000000FF0000FF000FFFFFFF0000FF002F
-:106860000FFFFFFF000000FF0000FF000FFFFFFF12
-:106870000000FF000FFFFFFF000000FF0000FF000F
-:106880000FFFFFFF0000FF000FFFFFFF000000FFF2
-:10689000000000FF000000FF000000FF000000FFFC
-:1068A000000000FF000000FF000000FF000000FFEC
-:1068B0000000FF00000000000000FF0000000000DA
-:1068C0000000FF00000000000000FF0000000000CA
-:1068D0000000FF00000000000000FF0000000000BA
-:1068E0000000FF00000000000000FF0000000000AA
-:1068F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
-:10690000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
-:10691000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
-:10692000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
-:10693000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
-:10694000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
-:10695000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
-:10696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
-:106970000000100000002080000031000000418075
-:10698000000052000000628000007300000083805D
-:10699000000094000000A4800000B5000000C58045
-:1069A0000000D6000000E6800000F700000107802C
-:1069B0000001180000012880000139000001498011
-:1069C00000015A0000016A8000017B0000018B80F9
-:1069D00000019C000001AC800001BD000001CD80E1
-:1069E0000001DE000001EE800001FF0000000F80CA
-:1069F00000007FF800007FF800000344000035002D
-:106A000010000000000028AD000100010005020692
-:106A1000CCCCCCC5FFFFFFFFFFFFFFFF7058103C41
-:106A20000000FF00000000000000FF000000000068
-:106A30000000FF00000000000000FF000000000058
-:106A40000000FF00000000000000FF000000000048
-:106A50000000FF00000000000000FF000000000038
-:106A60000000000000000001CCCC0201CCCCCCCC5A
-:106A7000CCCC0201CCCCCCCCCCCC0201CCCCCCCC80
-:106A8000CCCC0201CCCCCCCCCCCC0201CCCCCCCC70
-:106A9000CCCC0201CCCCCCCCCCCC0201CCCCCCCC60
-:106AA000CCCC0201CCCCCCCC00000000FFFFFFFF1F
-:106AB000000E0000011600D6002625A0002625A005
-:106AC000002625A0002625A000720000012300F367
-:106AD000002625A0002625A0002625A0002625A00A
-:106AE0000000FFFF000000000000FFFF00000000AA
-:106AF0000000FFFF000000000000FFFF000000009A
-:106B00000000FFFF000000000000FFFF0000000089
-:106B10000000FFFF000000000000FFFF0000000079
-:106B20000000FFFF000000000000FFFF0000000069
-:106B30000000FFFF000000000000FFFF0000000059
-:106B40000000FFFF000000000000FFFF0000000049
-:106B50000000FFFF000000000000FFFF0000000039
-:106B60000000FFFF000000000000FFFF0000000029
-:106B70000000FFFF000000000000FFFF0000000019
-:106B80000000FFFF000000000000FFFF0000000009
-:106B90000000FFFF000000000000FFFF00000000F9
-:106BA0000000FFFF000000000000FFFF00000000E9
-:106BB0000000FFFF000000000000FFFF00000000D9
-:106BC0000000FFFF000000000000FFFF00000000C9
-:106BD0000000FFFF000000000000FFFF00000000B9
-:106BE0000000FFFF000000000000FFFF00000000A9
-:106BF0000000FFFF000000000000FFFF0000000099
-:106C00000000FFFF000000000000FFFF0000000088
-:106C10000000FFFF000000000000FFFF0000000078
-:106C20000000FFFF000000000000FFFF0000000068
-:106C30000000FFFF000000000000FFFF0000000058
-:106C40000000FFFF000000000000FFFF0000000048
-:106C50000000FFFF000000000000FFFF0000000038
-:106C60000000FFFF000000000000FFFF0000000028
-:106C70000000FFFF000000000000FFFF0000000018
-:106C80000000FFFF000000000000FFFF0000000008
-:106C90000000FFFF000000000000FFFF00000000F8
-:106CA0000000FFFF000000000000FFFF00000000E8
-:106CB0000000FFFF000000000000FFFF00000000D8
-:106CC0000000FFFF000000000000FFFF00000000C8
-:106CD0000000FFFF000000000000FFFF00000000B8
-:106CE000FFFFFFF3318FFFFF0C30C30CC30C30C329
-:106CF000CF3CF300F3CF3CF30000CF3CCDCDCDCD66
-:106D0000FFFFFFF130EFFFFF0C30C30CC30C30C3AB
-:106D1000CF3CF300F3CF3CF30001CF3CCDCDCDCD44
-:106D2000FFFFFFF6305FFFFF0C30C30CC30C30C316
-:106D3000CF3CF300F3CF3CF30002CF3CCDCDCDCD23
-:106D4000FFFFF4061CBFFFFF0C30C305C30C30C3AC
-:106D5000CF300014F3CF3CF30004CF3CCDCDCDCDEC
-:106D6000FFFFFFF2304FFFFF0C30C30CC30C30C3EA
-:106D7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDD
-:106D8000FFFFFFFA302FFFFF0C30C30CC30C30C3E2
-:106D9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB5
-:106DA000FFFFFFF731EFFFFF0C30C30CC30C30C304
-:106DB000CF3CF300F3CF3CF30020CF3CCDCDCDCD85
-:106DC000FFFFFFF5302FFFFF0C30C30CC30C30C3A7
-:106DD000CF3CF300F3CF3CF30040CF3CCDCDCDCD45
-:106DE000FFFFFFF3318FFFFF0C30C30CC30C30C328
-:106DF000CF3CF300F3CF3CF30000CF3CCDCDCDCD65
-:106E0000FFFFFFF1310FFFFF0C30C30CC30C30C389
-:106E1000CF3CF300F3CF3CF30001CF3CCDCDCDCD43
-:106E2000FFFFFFF6305FFFFF0C30C30CC30C30C315
-:106E3000CF3CF300F3CF3CF30002CF3CCDCDCDCD22
-:106E4000FFFFF4061CBFFFFF0C30C305C30C30C3AB
-:106E5000CF300014F3CF3CF30004CF3CCDCDCDCDEB
-:106E6000FFFFFFF2304FFFFF0C30C30CC30C30C3E9
-:106E7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDC
-:106E8000FFFFFFFA302FFFFF0C30C30CC30C30C3E1
-:106E9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB4
-:106EA000FFFFFFF730EFFFFF0C30C30CC30C30C304
-:106EB000CF3CF300F3CF3CF30020CF3CCDCDCDCD84
-:106EC000FFFFFFF5304FFFFF0C30C30CC30C30C386
-:106ED000CF3CF300F3CF3CF30040CF3CCDCDCDCD44
-:106EE000FFFFFFFF30CFFFFF0C30C30CC30C30C3DC
-:106EF000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD98
-:106F0000FFFFFFFF30CFFFFF0C30C30CC30C30C3BB
-:106F1000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD76
-:106F2000FFFFFFFF30CFFFFF0C30C30CC30C30C39B
-:106F3000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD55
-:106F4000FFFFFFFF30CFFFFF0C30C30CC30C30C37B
-:106F5000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD33
-:106F6000FFFFFFFF30CFFFFF0C30C30CC30C30C35B
-:106F7000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0F
-:106F8000FFFFFFFF30CFFFFF0C30C30CC30C30C33B
-:106F9000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE7
-:106FA000FFFFFFFF30CFFFFF0C30C30CC30C30C31B
-:106FB000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB7
-:106FC000FFFFFFFF30CFFFFF0C30C30CC30C30C3FB
-:106FD000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD77
-:106FE000FFFFFFF3320FFFFF0C30C30CC30C30C3A5
-:106FF000CF3CF300F3CF3CF30000CF3CCDCDCDCD63
-:10700000FFFFFFF1310FFFFF0C30C30CC30C30C387
-:10701000CF3CF300F3CF3CF30001CF3CCDCDCDCD41
-:10702000FFFFFFF6305FFFFF0C30C30CC30C30C313
-:10703000CF3CF300F3CF3CF30002CF3CCDCDCDCD20
-:10704000FFFFF4061CBFFFFF0C30C305C30C30C3A9
-:10705000CF300014F3CF3CF30004CF3CCDCDCDCDE9
-:10706000FFFFFFF2304FFFFF0C30C30CC30C30C3E7
-:10707000CF3CF300F3CF3CF30008CF3CCDCDCDCDDA
-:10708000FFFFFF8A042FFFFF0C30C30CC30C30C37B
-:10709000CF3CC000F3CF3CF30010CF3CCDCDCDCDE5
-:1070A000FFFFFF9705CFFFFF0C30C30CC30C30C3AD
-:1070B000CF3CC000F3CF3CF30020CF3CCDCDCDCDB5
-:1070C000FFFFFFF5310FFFFF0C30C30CC30C30C3C3
-:1070D000CF3CF300F3CF3CF30040CF3CCDCDCDCD42
-:1070E000FFFFFFF3320FFFFF0C30C30CC30C30C3A4
-:1070F000CF3CF300F3CF3CF30000CF3CCDCDCDCD62
-:10710000FFFFFFF1302FFFFF0C30C30CC30C30C367
-:10711000CF3CF300F3CF3CF30001CF3CCDCDCDCD40
-:10712000FFFFFFF6305FFFFF0C30C30CC30C30C312
-:10713000CF3CF300F3CF3CF30002CF3CCDCDCDCD1F
-:10714000FFFFFF061CBFFFFF0C30C30CC30C30C396
-:10715000CF3CC014F3CF3CF30004CF3CCDCDCDCD1C
-:10716000FFFFFFF2304FFFFF0C30C30CC30C30C3E6
-:10717000CF3CF300F3CF3CF30008CF3CCDCDCDCDD9
-:10718000FFFFFFFA302FFFFF0C30C30CC30C30C3DE
-:10719000CF3CF300F3CF3CF30010CF3CCDCDCDCDB1
-:1071A000FFFFFFF731CFFFFF0C30C30CC30C30C320
-:1071B000CF3CF300F3CF3CF30020CF3CCDCDCDCD81
-:1071C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F9
-:1071D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD75
-:1071E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D9
-:1071F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD95
-:10720000FFFFFFFF30CFFFFF0C30C30CC30C30C3B8
-:10721000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD73
-:10722000FFFFFFFF30CFFFFF0C30C30CC30C30C398
-:10723000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD52
-:10724000FFFFFFFF30CFFFFF0C30C30CC30C30C378
-:10725000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD30
-:10726000FFFFFFFF30CFFFFF0C30C30CC30C30C358
-:10727000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0C
-:10728000FFFFFFFF30CFFFFF0C30C30CC30C30C338
-:10729000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE4
-:1072A000FFFFFFFF30CFFFFF0C30C30CC30C30C318
-:1072B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB4
-:1072C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F8
-:1072D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD74
-:1072E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D8
-:1072F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD94
-:10730000FFFFFFFF30CFFFFF0C30C30CC30C30C3B7
-:10731000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD72
-:10732000FFFFFFFF30CFFFFF0C30C30CC30C30C397
-:10733000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD51
-:10734000FFFFFFFF30CFFFFF0C30C30CC30C30C377
-:10735000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2F
-:10736000FFFFFFFF30CFFFFF0C30C30CC30C30C357
-:10737000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0B
-:10738000FFFFFFFF30CFFFFF0C30C30CC30C30C337
-:10739000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE3
-:1073A000FFFFFFFF30CFFFFF0C30C30CC30C30C317
-:1073B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB3
-:1073C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F7
-:1073D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD73
-:1073E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D7
-:1073F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD93
-:10740000FFFFFFFF30CFFFFF0C30C30CC30C30C3B6
-:10741000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD71
-:10742000FFFFFFFF30CFFFFF0C30C30CC30C30C396
-:10743000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD50
-:10744000FFFFFFFF30CFFFFF0C30C30CC30C30C376
-:10745000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2E
-:10746000FFFFFFFF30CFFFFF0C30C30CC30C30C356
-:10747000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0A
-:10748000FFFFFFFF30CFFFFF0C30C30CC30C30C336
-:10749000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE2
-:1074A000FFFFFFFF30CFFFFF0C30C30CC30C30C316
-:1074B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB2
-:1074C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F6
-:1074D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD72
-:1074E000000C0000000700C000028130000B815832
-:1074F0000002021000010230000F024000010330C0
-:10750000000C0000000800C000028140000B8168F0
-:10751000000202200001024000070250000202C0E7
-:10752000001000000008010000028180000B81A80B
-:107530000002026000018280000E82980008038031
-:107540000010000000010100000281100009013854
-:10755000000201C8000101E8000E01F8000002D895
-:10756000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC5B
-:1075700000002000CCCCCCCCCCCCCCCCCCCCCCCC5B
-:10758000CCCCCCCC00002000CCCCCCCCCCCCCCCC4B
-:10759000CCCCCCCCCCCCCCCC040020000000000067
-:1075A0001F8B080000000000000BFB51CFC0F00350
-:1075B0008AB7B13130ECE644F0E98159181818F86F
-:1075C00099C8D7BF1168C04E20BE01C4075948D71B
-:1075D0007F551AC15E26C9C0700A8827883330B427
-:1075E0004A21C4ED651818EE01F92BA16272403DE5
-:1075F00073A4C977F3281E3CB8D014951F620CA160
-:107600005F9840E82234F950A8BCB81E842E36C5D5
-:107610006EAE841E71F6A7A9A0F2BD55F0ABCFD512
-:1076200040E5C7A2A90F81F2017EE9B234D8030078
-:1076300000000000000000001F8B08000000000098
-:10764000000BED7D0B7455D5B5E8DA9FB3CFFF6421
-:10765000278470123EEEC400C1063C4280A0A83BC5
-:10766000FC1A7DD41E1025E5A11C446B004922A6FE
-:10767000D78C96D76CC8870450E3E751BD457BA0F3
-:10768000D88B0E5BA3A68ABDB43D887AA9C3DB2242
-:107690005AA52D7A83FA2C58A0B1572ABD4FCB5B3F
-:1076A00073AEB592BD77CEC9C74F47EF788D43769D
-:1076B000D6DEEB3BFF6BCEB95634D943F22E27E42E
-:1076C0001CFCD0A7291142A6F73DC92D5932C92368
-:1076D000E41B3E823F1FF923534816210D3EF6BCA2
-:1076E0003D10D905CF2D8D84A426C2F771491221F2
-:1076F000244848899A0B2D02B1870BE15977617CA8
-:10770000323E67C23387C8848C84F218FDBD20EBFB
-:10771000FB9C42FF399AA880F114F68AA8A43C96F3
-:10772000C2F6DF226446DF3C48DD57F578B86FDEED
-:10773000EEA7A26B24C5EB9E837F94E5598950E6A2
-:10774000FA0D47A5C79FB7D51F4FC2B9382F95A8C7
-:10775000382FDE9E108BD8E7E7EEE7A346F2F8F36A
-:10776000E3FBC32DD3B8026E6D8D3E7CB636EA24A2
-:10777000E5258436333B4BE93344CC5DA5FDDBCDB9
-:107780002312871F9F0F8C63D0FAF47F42E1DE9CA7
-:107790004B9241C0214938E0D61C5AEC33D3F42730
-:1077A0009E2497C2AD84CFB9A8FF7AFD302F0A0777
-:1077B0003FCC2B0D3C97C2BCA6F79F97BFD83DAFDF
-:1077C0006A6287CF70E7159844C821C0876A128221
-:1077D00078B9CDD19FAC9B56779AFE08A70BD5E020
-:1077E000EB1B229E822572DFF8000723E0A02F6F9B
-:1077F00034C7496F6EBA067820BE3A387CE20AE395
-:1078000007AB0F8FF4199A1D93803568F110E02DA6
-:107810009F30F8E557B7DE2A4F2194D53A0F4EA096
-:10782000F0CBEF5EB99040F9E8152780DF9ACBA640
-:1078300056CEA5F5B2CB63AF2CA04D423143027AB0
-:10784000DD0A9D15407F5FB32A68B909FAA365CBAD
-:10785000BACAB4106EA6036E1472864ACB1EF8B56F
-:10786000280DFC482F1EA473DEFEED33C1CF436C00
-:10787000F8437E5EEFA0CB8C78BF91E1CBA2FF01F5
-:10788000BE46101B5FD37EB22B35075EB25CE33C75
-:107890000ABF20BC6FFD9B8C97439EF41994CE3D8C
-:1078A000A5B29EA478CA26B16CB58CE263A14A4009
-:1078B0008EE5E4EA1290C360786926A412F89F4A24
-:1078C00007B2C826E77ECEF9AB60CDEE9DAD749CC5
-:1078D00033B34331A895AFD3B94EEDBF9E3B40BE05
-:1078E000786DE5B2E74802C7EB3C5844E76595C9B7
-:1078F000B18729DD6C2D3DACDBE5E3B15EF9E2A695
-:107900000F62A833B83CA0F0514A65D31FF9ECF4DC
-:10791000A17C4AFA08DFE8C4C770F1757A98F4F1DF
-:1079200059C71378EDCF571B055E7D847EDF52B2B9
-:1079300078407DD51FAF4F92046D172A2566324DD2
-:10794000BBFFB4EB0BF7D326DFDD72541935A36A06
-:10795000E74078CB75AE57F4EB6F508C7747D0A2E9
-:10796000AAA37CD5B81E688FDE63114A776740F6FC
-:107970005078281D17A5A04C8A49EC61D64D4AA223
-:10798000657FD44C6E413A48225EC4FCBC86EC90C4
-:10799000B36AAE530E932A4BB2CFDFDFA0E13C3483
-:1079A000182F17EC02DA2105851A2229A05B41AFB6
-:1079B000A092CE9D0F65A79DD1664C25E9F0A072DF
-:1079C000BC4B92A0D76F0D4DBEB8C75BE29CEF9049
-:1079D000DB8554E33DD1268D9CEE6BA792F7047EA8
-:1079E00028102F13761DC7D3660FD92B5D48E5C12C
-:1079F000986BC152209BE1D32C6A87C0932A9FCDFC
-:107A000063A6EA4057648FA4C23C71488A4742F596
-:107A10001DD40B4A06F623FBEA90FE9490894FF1A1
-:107A20003DF3BCD8F8BD655FA206F0531DD58C2D83
-:107A3000748E6B15D3D80874318DC9A7EAE88479A0
-:107A4000A0EF3C129BD7B7A57C5C879AD39687762C
-:107A50005906FBAE5AA52A7F2A7CDF3661207E229A
-:107A6000494F4FB70D9E6E7BF06689DA835FA2BFE8
-:107A7000CC2433018E7F8A2DCE4A0D80AFF71B0FA9
-:107A8000EAEAF83E7BD0FD7DAD42EAD2C98156C913
-:107A9000C7F8D26769601F8875AF0576A720DD1625
-:107AA000DBC4D69B9B8BF05DBBE717BA6AE3BFB51F
-:107AB00054CD78A7F65F8F80B7E8A7B77DF2A0A373
-:107AC000BDBB5D6F7F425E507B18E85CD041504A81
-:107AD0006C95E87B6F6CB105EA6CED63150CFF19D2
-:107AE000E6DF8BAF4F397FD16E30BAFAD3EEA656B0
-:107AF000D04FEF691D575D4CE9E8F74F28B14DF4C1
-:107B00006BF58E89F3C05E7A8FD3B7C0D389DD4D14
-:107B100079E9E823139E7E21F9711C415FD5F2F2C9
-:107B200001E96130FA7ACA4D5F9D577F21F475C82B
-:107B30004D5F1C1E273BD9FAC9FD23185E38BEDCF9
-:107B4000F8C988974FDBAE3F3DFD5AA27CEDEDBCF6
-:107B50003A3D3DF1F90A7C7DD6F90E4647798669B2
-:107B6000EA74FC51D48E91407F9491588ACE53A7E9
-:107B70000FD45B31A6B7845C12ED4F4BCC4E53C98A
-:107B80006BD85E21294B477BDB6967CC57E84BDA22
-:107B90004F7309497A715F64FA504F95A884E93FA1
-:107BA00033943F03EC08FEA3CC8EC1BAB3C0FE07EA
-:107BB000FD359BEB5F89DA5B747DA132E7BE37E070
-:107BC000B23F14BE5FE8676F0D737FEC97F9FE3824
-:107BD0004842A88FC4FE38037FF6EE8B395C476AB3
-:107BE000C494E9BAB5839EE42609B41B41FD4C8ECA
-:107BF0004A49E62F20256037AF970A62A00FE83E7A
-:107C0000AF278B7E7FEF070AEA878668DD8A1658E2
-:107C1000F6B50D13BBE9B8F7349269C59EBEF1EE17
-:107C2000513B7C00EFF6E2F50EBBF6BB52A250B61C
-:107C3000E91D7F549B563C0D8653DFEEA6F090293C
-:107C40002081FF02A1FBA22F18003FF6BE174EF6BF
-:107C5000B2D2BF9C0B364F011653B02F6DA7B63B67
-:107C6000B9188AA3A50A4A07ED1EFEDDFA4D05ECF8
-:107C700077DBFDACBC63D3AC8D169447F2FA561596
-:107C8000FB9ECFCAB76DFA4105EC0BDAB2E99AA9AF
-:107C9000BE6EF324ABE269F8FB365976D85F4DC669
-:107CA00082F2FF43D7E1F79917BD40E1498112B352
-:107CB0000CD26B97150ABF41C7DD952500FFD7147D
-:107CC00002F4EC3762F19B0CA43FA47B7FAE19DB7E
-:107CD000424B0DF4850CF528DE1E96605FC7EC3133
-:107CE000F0E79C43FAA57C41BFAFCFD6B13ED16D42
-:107CF000F659519F3DD68B2717DEEE557BFC80B79A
-:107D0000EF8DF9F01713693FD642390664F3BD0DC4
-:107D100045D92B6D787CCC37A70AF0489A73D12EC1
-:107D20008992DE1F13CA62DF5C403A2BC0781C4385
-:107D3000251FA1743A2EDE53012830AAF4E7708F74
-:107D40004BE6E9EFA15DA548E7BE34743BCA0D07D9
-:107D5000DAE3A845543E8D90483C9DDC5DA9E6A041
-:107D60003C185149D73B809FE09B549F30FB2CE14E
-:107D700003FF56A67132CDF333C073934CC71D4D2C
-:107D80009208A7C1E09A099EADD127B3515E7FCE7C
-:107D900070CDD4DE0DCF1112E397956A39F2CB5036
-:107DA000FD3B6D7C3FD5027E38FA6CE27E38777BF6
-:107DB000BFDA416269F0EB379CFE210DF625B67201
-:107DC000BD6C307D1072FB89189EDD7A6101D70B86
-:107DD0002D51AA17983C5C087A20C8E1DF02BB7ECF
-:107DE000909F6192B4E8F720F707915226FF7DF447
-:107DF0003FE0B751554E7DA00D511FBC2BC55F9084
-:107E0000910E8904F3BB5FEAB86202D04F3EB3C75C
-:107E1000A337B445133638D4CB4CDF097D962C16E6
-:107E2000FA8C20FCCEE37348920E3FE8C307362C51
-:107E3000CE42BFDD8D41871C8AB62EC6FDAF8D9E1A
-:107E4000D12FDAC1FDA399F0A76BC9443A7958A89C
-:107E5000307918317B52E0F34342CEE32E434ED6C5
-:107E60000CFEC4B10F8B4CED39783E5DEFCE8BE448
-:107E7000D826DA4E9DADA63C14BE6AF98B55127D0C
-:107E8000EE2C64F0B76611A4D390B1E08402FA58E6
-:107E9000ED467F4DA8D2BD2FB69515E8A7E77AD459
-:107EA000DF763FF500FBB8A13E9B28BCDEB6F13F74
-:107EB000855C4AA1EB50371003EC09D5A4223102AE
-:107EC0004F3D0FE8453563217C765754C2F3BCD94A
-:107ED000F14AD9A6075433BE05EA8FF8CA7DEDB042
-:107EE0005EF526595624C6073936789B4AA1633F6A
-:107EF00097ADBBFCA589D62AD4EF8646C617F69F58
-:107F000077BDAC72B9E7A417412703C8BBCF441FA4
-:107F10006FCAC25FEDC4BF834E8AFAF02BDA85FACE
-:107F2000F9AB9CF875973F6FBCFA014F141FE751EE
-:107F30003C017D9E379BD123B547D17E7AC0D76166
-:107F400002BC1F2836644BEA6B175672989FF92CB7
-:107F5000DD6851BBE7FE95DB4D68975F4C6580841B
-:107F6000CFB4FEA37A59C376542E542ACC6E97C050
-:107F70001E9FAF6CAB82F63B295E81DF77027F43A9
-:107F80007C20A1A11CAE97DB2B36D2BE5B8F4AB200
-:107F90000246ACBE14F1EBE7FCFE912751097EC806
-:107FA0002DFF4B26BB0CD04B03FBBD9A38BE4519A9
-:107FB000FC0D609F8CA9D3A702D833B5DB5E275791
-:107FC000A65B57B5C2F07F47DDE10E344F9F77EED9
-:107FD000473CCB4DA048D897542B36FA0E97317FAB
-:107FE0000749D0F5407D4E371F150E4CAF0FBAE64E
-:107FF0003F96C753DCF55E56B8BFCE60F03244FF03
-:108000001B07EE5FC0E76C9BC2E323D40043221E34
-:1080100049ECFA5BB9F15005BCA75CB709F0B55D56
-:1080200026D5CCDF1C473D14E1E3ED2CCFC1F60B88
-:10803000552647C79AFA16C0F7D866192C05F2B824
-:1080400062E0FB51CBEBF67B281EDA0B492C64E097
-:1080500010D8EF8BE335A4CBFC5CA6C7F2EB290963
-:10806000D07AF9A52469D0F6EDFB1FA8D068394273
-:108070003754600AFBCA193E7D252406A690C72204
-:1080800029997D4F424C5229EFB140951E183F036C
-:10809000F75F77E69298D7E8931B82AEEE6CBEC787
-:1080A0000F7AE481E27BAE9800FEC65215FDE4E44F
-:1080B000630A27E14F54205E163761BCF6596CDE27
-:1080C000F40DE253D5D9FAC7DC3F1BF9A43DFC34CB
-:1080D000CEC35A4762E3B15E8C60FC860A54F05707
-:1080E0003655337BD78D8FF524F1B832DD4EAF870F
-:1080F000906EDA3F51F8BEE0C58D60E78F835F690F
-:10810000F9974D7FDC381CBB45C40F85DDB245EDCA
-:1081100044BEB728CF815E12768CBFB813C7FDBFAF
-:108120009CDE87DABFBFC4E96F75DB356E7BA65E68
-:10813000D61DF6AB7B5D1F795257C0FCB6E4537E6B
-:108140004FA3077E03FA9AB6DF115DFCAB89465F49
-:108150003F7D72C8C0EFA23CE6AC86F8197A7D2A52
-:10816000F7608F6632BE1A2BE4D037285F0D107F80
-:10817000147CF511151287804FD40EA42F6296201F
-:108180005F097E51BA3BDACFA7F460D4CBE0B906E1
-:10819000FE2239B45C48E93D65B38784BC504B3B53
-:1081A000E313A5FE74F7A021231ECF94317F7596AB
-:1081B000D56D4293606927C6F5285DFD17D095AA55
-:1081C0002725C0EB98FB17E0BA7EA93056F7AB2CF9
-:1081D0007EEC5EC7CF397C89BE1BED793F1B8EB22A
-:1081E000F87D31363F579CBDFE5703C6D9FD319708
-:1081F0009D334C3F428ECAFD08DCEF3558FBE1C68B
-:10820000D795B323903E7ACB19E4ED4D2AE78BA3A3
-:10821000BB1C70E9070F65476CA0F9F9859FFE53F9
-:10822000C60550870D010E6E385EA23AFD879F3756
-:108230001CDDF1EF97B8DC1F4C1E044D33252BE0FD
-:108240003F23CCBF1322DCBFE3A4F79DCD32DA215C
-:10825000C1B0BC134CC9ACFA6ED4C1627C4AEF55B4
-:10826000AA8DDE47971E4A413BB73ECAA4870693B4
-:10827000B7AB7CE60D2ACAADF4FBF1BE7C03CA2580
-:1082800069F20D32E2B5EEF3C937182ABC7BFD9BCB
-:108290003C7FE0867241C7C6D2DF51B8AC3EE821D0
-:1082A000E897F998AECE16575BCDF78137F07DE4AD
-:1082B0008D241E818FA7885C09FC728A1C8E4CB3AA
-:1082C000C993FB548DF14B9BE76DF0AF8A78F94D64
-:1082D0001DAC2CE673F3FDCEF2D7C9E23CF0EB7D8A
-:1082E000FD3E0FE26BB5CBBFD6AC32FD7133A96B4F
-:1082F00005BCB5784815C8B11B74A28EA0A6EBBA10
-:10830000671E9CB19296BFCBED91F7A95C366C715C
-:10831000D035A1A406F87DA76BDAB59710689F6CDD
-:108320002D807D5A36C17DAB1BCEABDA9CF31B6C26
-:10833000FEEEF952F2C2F9669A87BA474A6B4F3F8E
-:1083400022E40DC757A6BC2A914FF50B20205ADF17
-:108350009A43D8BEF3AD60B209E535CBA71AACFDA0
-:108360002F55463F9FB6FDAB83B45FE7EB5900CC7A
-:10837000D6966BC5C12F24E28235A4CE1C4D7F5505
-:10838000F72DB246135BBDE810EB150F5C2FD3BC85
-:108390004FE83E4BBEB06FFEDF9512C7D434F3BF3B
-:1083A0005D49D440FF5EC083024F15F18D7E608A27
-:1083B000DF5A35D4266541BE5317EE03FD86EAA089
-:1083C000875AF805E45A09936BC112E777B77FF82B
-:1083D0004355C4E153C87F188236C07E08A514F007
-:1083E000DF94AB277BEBD3F16A605D1742298E7275
-:1083F000A35E67F56B8871D7EC32E43F8C3FD4B74E
-:108400009F8F71F5FA9106FA77551233B10F17DD88
-:10841000D59E9548D2A60F6BD51E0DF8AC96DA45C1
-:10842000F6F7EBA38AC34FEB7E7AA8E51C2A817D81
-:1084300092CCFC483A2DDBD6FDA70E89E7AF185940
-:108440004B06F0DFAD8F327FF00DEDE3B398DFD058
-:10845000297F4F3732BFDCBF3DF67D0DFCFCA71EE8
-:108460003D7615C07BEDBF2AC407F91B8F85490AED
-:10847000EDB1A406F6D89A2EC54CA6CDAF6862F130
-:10848000CFC7C388AF354F7A930B69FB354FBF33E6
-:1084900085D0F99DDED4F3E268B09B1F95581E820B
-:1084A000D53DE56AFA7E8D4A56A4F31B4CF630F9A9
-:1084B00073F2D96015F0B7B467FFF5D86FE7528F44
-:1084C000D7B6DF2EF678906F693D66973F2225C7B5
-:1084D0004BE9E6C7F23F4E3E22B1F9EDF524FD30FF
-:1084E000BF3D3BB5049D47ED9E0F509ECC7DFC8764
-:1084F000118043ED5EC5A1076AF72829EF147C1EA1
-:108500008327C48DA41940279C5EBAD661BCA8A657
-:1085100073EB07E0C7A8DDEB946B142EB114C0F524
-:108520000D25B610CA4FFD4BC4A0A07AFFD0C311D1
-:10853000802BED77A59605FAC649DFD0FFD99CFEC2
-:10854000FD11D283F1BADACE76365ED7577E0F7A36
-:10855000A5D6253FDF875FF2FBDB33D7785CF6CC0F
-:108560009EA1C5EBD6FEF0CC43161DF7E4937F78B1
-:10857000C8A2F3BFE5AFFFF9D0B7803F7FE6D74190
-:10858000FED73EFAEB08B1D163AD87F1E3E9B1C4A0
-:10859000A27B5472FA37DE24F84B4EFFF4F7E30C5B
-:1085A000BAEED34FFC25CFA0F5EB7F3A7F14C0A1E4
-:1085B000FEC773470DB4FF067A4D7AEDF34A225E8B
-:1085C0008DBD123382F6F1A70B3F07BA0E8C83796B
-:1085D0009E3AE28D81DBB996BE6B980AF85A87FA0B
-:1085E00018CA1B289C6B1EDBFC01C889FEF0B6462E
-:1085F000CBE8AC4F8D06A77D4DD73B0B106FA40782
-:10860000F5A8BB7EED6B149F1766C6DF19F2B106A5
-:10861000F2AEF6B176365E27C55FA43FFE4EC12F9F
-:10862000B3FAE3EF0E17FECE905BBE970F798D5D28
-:10863000231C7152F1EC8B0FC6B3E203C80B210F60
-:1086400006836FB5C4E6B5CC633EE801BE7A32D886
-:108650008BDF8580DF1F9E1947287D1CF7F45C0F98
-:1086600072B3E7A75E7D177DBFE6A76F209F9DFED3
-:10867000F12B9A81F9992424E5F13C31F67308E451
-:10868000700DDBCB91DADDE19437D287A79AE4A2B3
-:108690004A2382EF8FE1FB24A3FF9AE4FE25521ABE
-:1086A000BCBDE1296276407224C265DDEEDF69CC93
-:1086B000BEECC3A7540EF83CB600DE67C2A758BF95
-:1086C0000EEB9F69C3EB6EC6B7EEFA35943F41EFF0
-:1086D000F5C36F527A039EA7777A55D07BA7C1FE68
-:1086E0000AF5C77B1FFC99FD33DCFDCA2B6EFE1615
-:1086F000F1630E87CCF461713B60E0F50D177E3FAE
-:10870000F7180E3A12703CF9717AF97F8ACB8D1AFC
-:10871000625516D8EC139F87DA27905F46E2D6E8B9
-:10872000C2BEF99E847D04A5BF938F2A18AF69ED60
-:108730003C8072DC2D2F6A48FA7DFB5F3DCC5EAC3D
-:10874000D9BB7F0AC8B593CF3D8BF459F3D8310D0F
-:10875000F62F2FEE794AEB2EEDE307D00F499B7EE3
-:1087600038F9A3FD53983C48BFFF0D6AACFFDA7D92
-:10877000CEFE6B1FFBC0D1FF5AAB5363790C038F46
-:10878000F3BE6A2E85F5BE7FC843409EBEDFA9A416
-:10879000F5BFF670FD28E0D4FACA82DF419CBFEC39
-:1087A00070C0003DDAB5C91C7507D86B873D04E47D
-:1087B0003751CD3F7869B9EB9500C633BA0E5FAB40
-:1087C0001836FFC4332E78CE7CCD9A1BA6FDCDEC97
-:1087D0008E97C116CA2D37CA8FD27DA3DD7FF54A89
-:1087E000E52890FBCD60CF4F84F16251F07F289156
-:1087F00005952C7F50D6FD69F537EBCF138A63BE04
-:10880000A047977B7DB6488F62BFC5FD4DADA1F4F3
-:10881000FEE8059AD817D0716D7290DAAA55E9F082
-:10882000364B637648A6EF976ACCDF93E97BC52089
-:10883000ED7BF99BE3470BCBF174F39EC6FB71FB19
-:108840005733C9030FEFA74C331CEB05782FB2E564
-:10885000C58F26C98D90274A4221773C3AEEB3C78F
-:10886000A3AB0EED87F873EED5FBF201FE11D2AC8F
-:10887000BF87763C899D1BC08E75C79FDD7989991E
-:10888000E2D1BE50CD9114E9DF5FFFF8BB897928B2
-:10889000CD63E6F90A6DF1F766BD5FFC7DBD46C7A5
-:1088A0006DC9808725DA9C7FD280BE649248F77DAF
-:1088B0000BA79BCB49F7532B619E3116BF9FED82CF
-:1088C000D7A51C5E3F3B9F2E9CAA9E0A62A81E0A4B
-:1088D000DFB94BCC661081F397F7ACDD0F7C26E255
-:1088E000F7D644F95C70E8F01B6E5EC42ADFE27BC9
-:1088F000B521E445103D27AD5EE89B87C5F755518E
-:10890000DC2779389F1D78F3661FC82D95242A0B24
-:1089100061BFC4E39A986F4FFBCB4BF98949E7AB32
-:10892000E906DADB79A9D50FDC0471757D0CC62365
-:1089300094B397A0FFD0DDAF128D59980F16322A4D
-:1089400014DB38ADB92C3EA3EAF1B479C3ABB4C49F
-:1089500013B05EE5EC65D8AFEC8B613D121A5ABEE0
-:10896000EC77AE8E207C7D14BE201F1164B02E9E4D
-:108970003775F7D511D433FE839E9DF0DD1F6279E4
-:1089800054B7CB8118E459B9F3A82ADE6A27D05F1F
-:10899000EB3109E328827E5B0BEBCE03393E401EB0
-:1089A000D54B9ACDAF9E298FCA1FBA11F3A8FC9F51
-:1089B000368FCA2A9807F6586B361179559644E7D0
-:1089C000D1CAF3A2FEA3F5A5B9A09F5AFDE2FBCB45
-:1089D000734D7BD95A7F00CB3CEF6AB4B7BD09EA2F
-:1089E000E78E26759DE8CF33C93536391BF1AA08C5
-:1089F000E77FD6CC7735479E7CD4115F3AF0E666A8
-:108A00001FE86FFAAC2C02F851BA02BB3D2FD54ECD
-:108A1000ECFA483C051DB5160F1CBF53CF5E847E93
-:108A20007C51F6E949D34C537FBE8FD91F827E7D9E
-:108A3000B924097AC967241EB809E83937140B32FA
-:108A4000BAC438595B08DD53FDD6D1567C03C6DB6A
-:108A5000CEE804B95ED071FFF95FC6E75F64615C80
-:108A60002244309E96791D65B88E559A19F6DAE043
-:108A7000987B5EFABCD4BBBD6C3D2DF1E52CEFAC10
-:108A8000DA198715791AA27E504A1478411EE6B287
-:108A900038ACEC63FCD6872FAA2A6CFECD26B2DC5C
-:108AA0000212509777E2D146554F62FD127FE27C69
-:108AB000AF233ED7CDE2BAAE78E27CE516C6DF83BF
-:108AC000E04F9CCBD80A71B789109F8BF2F37D06DB
-:108AD0008FD3992CAF28033DB5150F1C87EA688CFE
-:108AE00061FBBB1ACB59BE9244B85F3BD9047402F8
-:108AF0006E0946F73F6802BE092B822F7E88E53B50
-:108B00002556BEC9FBCC5CC8373CF0E61B55AB28EC
-:108B10007DB49A01E4FFC1D6A72767205E873B4E4C
-:108B2000FFF5B271DBCC10EE77075BB79E62E30E08
-:108B3000751C115FEB5B9F0FC769350619A7838D05
-:108B400033F8FC199FDCB17F35E62FF828FFFBE9ED
-:108B50007BDFEC1E9248D37F16E79F036F7A515E4E
-:108B6000B7E5B2FC284F49C8644E4067FF9ED2BCAF
-:108B70003978DEA1EC02CC9FBF637F3BCA190DC6DA
-:108B8000A1553CB1D04AD62E61C239DBC83C82F136
-:108B9000674F49DE2A78DF403AE273400F97CB2CCB
-:108BA0003FB9A4E426E8271BF892CEA3DCC7F69DC4
-:108BB0009E928B6F86FAFBA7BF9E68023895333A68
-:108BC0002007F31D706C358AC4B99D01F9DE53EEA0
-:108BD0008C5B109F33FF93A84B306E4EE54287D7D6
-:108BE000665752BD781FF23329B3C0DEDBFEB56B8A
-:108BF00063767EFE672DFE1D565FE46B093E4F9F38
-:108C000037D79A2BF2E6123EA50CCE29F5E6532F64
-:108C1000CCB7E77FF17CEA90C8A7E6F1CC0EFA5F0B
-:108C2000BAFC39F739C6CF2B9FFA292FDF0F07C9B6
-:108C300058C8A7FE8987C4529017F36B250679316F
-:108C40006EFA70F7E73E07D06B8F64E0E7F7013804
-:108C500036B9979F70E1ED463FC6E7C478CF837C75
-:108C60002A1D9C4F47573BFB195BE73C9F755E8372
-:108C7000335E55681538EA9FDF56E4F83EBEE302DE
-:108C8000C7F789F74F759427252F76D4FFD29E39E1
-:108C90008EF2E4CE2B1DF52FDCBBD851BE28B5CC0F
-:108CA000517FDAC11B1CDFA71F5AE3F83EF3C87AD5
-:108CB000477956F7371DF51BA87902F92C7040004B
-:108CC000F7ABDB46CB76FA6CCFA67A250BF3B8353B
-:108CD0009ED48FF166968BDC9767E06EA7146BA627
-:108CE0004EF9573126CCD331CFF046E423A5386F67
-:108CF0008E81EF672C00BF132963E7B444FCDA537D
-:108D00004C527EC8EF0BB9F0EB8A4B7B946D29C0B7
-:108D1000B376F4CB07A5487FBC7AA2EE7CC6A1C58A
-:108D2000B555E3B3E507E4F9385F8CA57C817EC4D3
-:108D30008F15D8B7907961B40F6CFB1B84A3D8DF73
-:108D40005CE623CD0053C11715CB7B46BF80D5C44D
-:108D5000BEC62B0F272FB9BF5EF1A2DD25E4CC6084
-:108D60007A45494E73E421B89F54FE95F9609F1EE1
-:108D70005986F2A8775FD02B1FE333E1BB478DA163
-:108D80007CEC957F7B0A1C7261A8F6995B4EDF052F
-:108D9000421FCF05A597D711C80BA372E9CEABAF81
-:108DA000C23818A9278EF3807955711FE83D6A975C
-:108DB0007DC567DB3F47CA997DF6F766A78660BD2C
-:108DC00036F927EC5501D7118575718CEB85650255
-:108DD000FBAAA6D9B128F801DBA08A6D9FF65DDF5A
-:108DE000F958BF39A4C9E02F6D3E381FE3035E7FF9
-:108DF000DC0779CE4D9E7825ACAB295BD6D3E53B1D
-:108E00006DF631FF8CD6109CB67B00FAD034BAEFE9
-:108E10004FB3DE7FF131BF4BB3BEF820E8B99CB051
-:108E20006640FE44EBFE598B305F77A1AAC3BE9625
-:108E3000D04DDC3BB6B8222171F46769B932EA45FE
-:108E4000AD2182E30F36DF5B7DCCCFE06DF00F38D4
-:108E50005FAF96DE4F9169BE9B61BEB983CFD70BE2
-:108E6000F39560FC108EBFC9C7F0E886BF87986D88
-:108E7000F368BD96635FEE28468A61F97AF72E9C07
-:108E80008A744A05B5837EC53E82D2EFC340BF6275
-:108E9000FF2ECEB3DEE263790902AFC460FE881113
-:108EA0000915F7BD3909B6FFED931F8C8E723C3161
-:108EB00082E7BFC6A8189704378DDD8FA1F8D9BE09
-:108EC000C77B690CF1D5FE15956C027A2BA6EB8158
-:108ED00073B90759DCA9DD13AB8A87FAC613EDDF36
-:108EE000E1FB40952CC9C27B529485D174F6672F63
-:108EF0009D73B8B9E5EC011FCFC3CA27F94CCE96D4
-:108F00002E85A34499FA71DB1B0DDCAF3CFCF329E1
-:108F10001D08CFF631F7A11D2DFC63245A3688BFFA
-:108F200087C54BFBF0BCD448513CAA574C45A75FC2
-:108F30007B31C7739D2B9F97E359E057F8ED493478
-:108F400017F95AE05B017802AE94D9D181F495C249
-:108F5000F9C60DCF53FF4DE17904D600743B96AEB0
-:108F60001FF8E6C01504E3602E7E14ED04DDBBD7C8
-:108F70001FF6FFF75EBFA087CCF5ADB4FB0F11D78E
-:108F80000D737AF371BDF942F9DB6D709E44CD65C6
-:108F9000FBDD7079F3AD329CC320960EFEB5B03880
-:108FA000BF53E6BC7F2450EADC7FF85CF74D78F8CD
-:108FB000FEA3DFFD2ADCCE12E7F9DDF377E36BAE2B
-:108FC0003F7D1E261993DEEFEA8EC789F886C88397
-:108FD00015710084035DBF67961C47F95746CC9D09
-:108FE00069E4D3323FD30B5DCFF9314F225CA5A1A9
-:108FF0003FB6A02C5501E5823A12033D71F1F143D1
-:1090000024413BBD20C0E47E41595202BF47C149C3
-:109010009617B89DC72B0BEA93D24ADB38969FE987
-:10902000AD8FDEBC1DE5E37363595EFA6D15CC7E32
-:109030003B14BDA1A302C62D67F9E461BA5F84BCED
-:10904000B1F0116F12EDADB26E027E54AA05AC30D4
-:10905000FD7EBC914CBD713CE47DF9F079B251C705
-:10906000E781B1DAFECB69BDF5850103FA6D290A06
-:10907000B0F3BD611FEEF7FF9CFD75F4AB9E6E8CE7
-:1090800062FDB66F9B685734EF3F817EC3A0392DD8
-:10909000C6FCA8A642CA613E874CF0731035662C08
-:1090A00086EF077E83F5142DF11B0BEC93651AEE0A
-:1090B000EF010E104F68F2B37CB9CDFEBA68363CB2
-:1090C0000BC98A4569E0BD82EB1D4A518A96D79744
-:1090D00087A495A7942CF02797914EC873F7B424D2
-:1090E0002B404F93D5BA01E38CF1252BC07F3CA6D2
-:1090F0005A8F810F5D2B67E745043E3C7E127F222D
-:1091000004F552D2AD74DC89011DC7293892C4BC64
-:10911000E58FDE9C99D6FEBFFD68057EDFD65879C7
-:10912000789E8D9F4319E2951B8BE73CE0A7E3BD3A
-:10913000EA67FC9AA95FF11C6ABFAF723A39F0E6A0
-:10914000C451605F3664C8A356748AA7114C3E812F
-:109150003F62FD78635476C8DE0F8387F2DCB30C80
-:10916000AFA58C3E9B7E3C310BFA7DFECDA53AF837
-:10917000FBFE945B8CFB86534F7B4DB05F4EE590BE
-:109180006ACCB77C7AE68BB03FFC43E3C11CD526A2
-:10919000174FFDE895191EDADFA9275F99A1227301
-:1091A000251D76ECBA73AFCE003BC19A434AEAE87C
-:1091B000B356D708F45BEB63EB107972DBF3B4566C
-:1091C000785E19CCC6F679A3E43BA1ACF85E1DF736
-:1091D000EE345C378B2BF0380E5D5F5308E95AA7ED
-:1091E0001B1088175ADE7110CF7AD38BF4F75121F8
-:1091F0002929BC10FC820AB6EB594D92904FA1A5CB
-:10920000EA803D89FFE52401BE09BEA6EF475AE387
-:10921000F7C1DDE9E7F90F3C8F70E39BB74F04F826
-:1092200008B9AECE2518CFE8F99A2F09F6E83DAA7D
-:10923000F19DE560075EA7E23C6819CF1BB9F1B369
-:109240003C58E488E3E5F0F884C06B263AD9DA4864
-:1092500062C514DE3F6BF4C560FC7D8D3A967FD20B
-:1092600018C5F2DE46039F4F3796E0B3AB3186DF79
-:10927000F73496E353E4F5E1D65E417B3A5E017A3A
-:10928000E81AE687D30DD9847C852C95F8E0BE26B4
-:10929000FDE8BF55C17E1BE44A560EF2BD04ED73D6
-:1092A000799EDFC8FC39ED15469F7C15F2B4C943A1
-:1092B000249047D62CE66708437FB47DEE1242DE49
-:1092C000B6C9F573F49FB74BF8FAE87CB24CE77770
-:1092D00077FD884A1790D3BF1D958B58EEEB373D2D
-:1092E000FC86FB047FF9DB36FADE3E9DAE9AD2D1D6
-:1092F0007689C9B13BF9F73BA6CFC8BA01CAB366B4
-:1093000064815CDF3E8B183A85E35D866C79B2FA46
-:10931000EAEF683C98376F3CD74120A7EAF59D5BA0
-:109320006CFB9831165911B7D1CB5D756AE52EB437
-:109330003312F98B2763BE31F76BEF9E678EC17EC8
-:10934000B13C21F0E23C8BEB159033979D657AA8F8
-:1093500057FF7CCCDE0BBDA771FC6F9BBD4989001C
-:109360009F803C057959962073E83C4397B2F8F703
-:10937000AC775304F2FBB4187D0FF6A8C6F24D0A81
-:10938000A24909CA3FF2C7670620EF3DE7FED42E87
-:109390008AEF0FBBBC06C41BBB9EFB0BE6672853C2
-:1093A000341FF077C1BE6398B7A4C8DD1AEC789774
-:1093B0000526CF57C19E8589607C802A6A8A6725E9
-:1093C0008FAF8F3CD5322F04E7BE1227ECF5B707DD
-:1093D00012B7B21D33317D51CA0F7ED1FE82168085
-:1093E000C7560F2B2F0B4C6AB1B04CEB67B37233DF
-:1093F0006DBF35BB332A6743D2D4C4968397425995
-:10940000D49FD862CD26E41AAE0F48285108FCDE5E
-:109410005BD669396C2BABAC4C7CEC29D6BBEEC06F
-:109420005F5E1C4DE150B34FEAC410DFBE9D12AC2D
-:10943000BB60EF4E94AF054982FBFE82A49484A3E7
-:109440009D7B1A0FEACDC2B926F04245C3A428BBC2
-:109450005F484B7A62B0BD9CC4EF0F1174F17490F9
-:10946000E9C74949DADE1E9776DD273289DF57835F
-:10947000200579B98D9D0776D37929EFAF81585BA7
-:10948000E03C2E79CCA3637C9CFBD94F0ABB89FBC3
-:10949000736EE10E3CCF262B7001C8BF952AFA816E
-:1094A000D7162637521B8AAC7DB630462D56D2E2EF
-:1094B00067F4B236BB336F2AC5674BB6B3DCC4F36F
-:1094C000E7A3D956369CD7ADD97BF738C8EFA92189
-:1094D0001DD77F13E6FB328B879FD83F2BEB125AA9
-:1094E0005EF7328B63ACEB7A4503FABE27C0F38E8E
-:1094F000BA2EBA12D657B34D267221E34B73229D72
-:10950000AED971019CAC7B7EEB5BF3FD630979A462
-:10951000C8D4E58B08E90E9E68F151FC3FA2E9939F
-:10952000803EBA833D2D405F6B67C99C9E7A5E305A
-:10953000559EFF5800E35CDE027196DDCB2AAF0436
-:10954000732B4F66FC4B0912E3DA4A76B30FECF942
-:109550003FB6C8683F838B7403857BB14A0EAAF47B
-:10956000B95DA3F8043E6B55511ED2F76D1EC44B76
-:1095700007DE3342DAD83D2DE3F77957829D5D5CF3
-:1095800067AE467B5B2F453FC038D2FB837912E73D
-:1095900011267F27EAA442A5F566050B117FC55564
-:1095A000D7AE85764A784900F83D4F495AD8FF77BB
-:1095B000991CDE2E273B7D2097234588DFED114641
-:1095C00017D63DA54817BBE53917805DD422ADDC21
-:1095D000F20BC06B76119E7B85F7EB61FD1C9F4DF6
-:1095E0007ACC07F8DBCDF1A9EC942DC8D714EFB7EE
-:1095F0004A37AC06B89ED8523FDF47E19AE735DBE1
-:1096000046503C1CDF52DF129D857828F2D1EFC70F
-:1096100003F52D3E8A97DD1BCD02DD569EF8099598
-:10962000EA48B4F52DE66CF09FDCB7069410FDFE19
-:1096300002F83F1EC9117CCFBE1717F5CA1113ECF3
-:10964000D226AB4FAEF8A85E28B6D59F47E5C20F2D
-:109650001E5210AFFF4EC7033941D76101DDF74CF1
-:1096600052D12E08D0B904683930B908F36DE9BA7F
-:109670004900EC86C92AEA7911C7D126C96837435F
-:109680007DA087407E11E6CF51791D87733E4A94B5
-:10969000C5751465874979980479FEBEA42FC2FB6D
-:1096A00048FC25B6BC0290BFAE3C04C5551EEFED8C
-:1096B000CE97A97ECD3DBA481A47F1F25E80EF8B76
-:1096C00072E93E96BE7F3FC0FC40B7C7AD2F43BE98
-:1096D0000C31BAF3593C2A3E159EA3AE2B1E359091
-:1096E000FFA5FF7E3586F6CBBD63D4B4F960FF1AC3
-:1096F00064FE41EFD862BC57A38150FE07BE08F15B
-:10970000FBF2B8FCF0707BC17D4E40C8134F365B56
-:10971000637DFBDC5139A1BE73704AC8F4813CD82B
-:10972000AF4FCD027B743C9753CDA9595F05BB4524
-:10973000E5F260879F9DCBEDC9269DBB08D8BF3160
-:1097400062CF4B10F2605BA30F9F0F5F3601E39770
-:109750000F5F963707E215072E7E1FF7BF6776303B
-:10976000FE3D73E805B84B899CB1A8B6311859A1E4
-:109770005F3E752FDE17F27D357E17E6CB43BE0EBA
-:109780009DD25DD9CE3CCC47395CCE0578DE808752
-:109790007D17F778A867BF847EE06D7C3DBEC43C32
-:1097A000DC57821B0FCE1DFB4907DEC724E0E0BE5D
-:1097B000BF433D3B85F9EB036C5F2AF297DC794AA6
-:1097C000623EFB8219EE3376E143F835041E44FB1A
-:1097D0007AC91CA50F4037B5671592B4E585F49D8D
-:1097E000DBD0F0FD6938EF9205F7AF243A2E29045B
-:1097F0003E48A29DE80F353BEE712551B5C77EBEB0
-:1098000024E83AEFE2E617B83F18F4B4660C7CAEF1
-:10981000E57DBACD1579B998A7AE9207C0AE3D15D2
-:109820007C6B06F8E36AA998005739512D3C4F7AB2
-:109830009AEF4BD47DB7E2791E313FE18F13E59A61
-:10984000BD8BD04F57BB3B84E7796A924C0EAEF389
-:109850005907BDB23DEFD64C41BEAD672FEB6F3C13
-:10986000E080D2C7877A753EAC3FD870FE4C38672F
-:109870009227D79D370EE0A3323CC07EF9C9109ED7
-:10988000D355BDB6FB53DFE2FBE365DC1E09124B8B
-:1098900006782A8158376167164D95DA474AAFDC5A
-:1098A0009BDC02FCB0DD656F6D0FB0726B70724BAC
-:1098B0007329EA67948BCB023F437BA8C52FCACF9D
-:1098C000A29CDCAEB1FB3AACA7BD06E83DDA1ECFE8
-:1098D000A75BCB4A507F2845A400E0360F1C2D2003
-:1098E000FF9EF6EE023FC38FFC896B0236B89D0ADD
-:1098F0001F1907FBCA34FD598EFEC60DAF3F3A7ED5
-:1099000017E0417C9F17B91FFBA7EDD0DF41C61CB4
-:109910007A8BDABA24EF692F9E33DCE171DADBE26D
-:10992000F920E7CB36D7BD1DBE44B3099B73C19F59
-:10993000EE7B9605BFAA672739F2A4C607593C5BA0
-:10994000554D7055D2EFA5EC7B80D1411BCFC7C9D7
-:109950003C4E4E86719C71BBFEE3CCE07282F07D82
-:10996000ACAAF7DECB3940FEAB3BBEE8966FBD4FED
-:109970002EDFF2393DC7A5C4B3415A5E93EC5C10AB
-:1099800060FC3905F87335A7D3923D773F076AFD30
-:10999000319FF967D837ACF2991704A70F9F7FBAA8
-:1099A00083623DFDE417B3CBAA999D5BDF3EED4A90
-:1099B00028D7DF51A45B69E245E2597D36E8905F24
-:1099C000F7707F51B56AA11CAB3E1BC1EF9FDF78DA
-:1099D0007EC779B6FEE385F0BB18EF16977C3E7024
-:1099E000F14BDBCB291DD73FE191BDB671EA9FE07A
-:1099F000E780FC545E3BF9DD047E570B496F9E22E5
-:109A0000C887BB3451565AC12E7AC42E1FCAC16EA4
-:109A1000EB6B0FF716DE15E0F5AD60FAFA4157FD76
-:109A200022D17F2ED677CF47C81F28839DA67EE2FE
-:109A300015F343F975B7ECEA2F478C3F06FB13F695
-:109A4000FAB703E35F843B25EECA4E568C66FE1DD3
-:109A500003EC80EFABB180FD3EAC6F737AAD3E7B23
-:109A6000BE03DF7D709FE078FFFBC6A8235FFFE6A3
-:109A7000443D9ED3F87680D16535B5E8B1DD8ED111
-:109A80008E3CFD7FCCE3D3CEE3920CF3B8EC6F3C7D
-:109A90008F42077FF6CDA3D8F1FED3CE631FF70B1D
-:109AA0003FC79FF375762FC07C4342BFF57C5AD7E2
-:109AB0004F69FDCBF4E9A3CFF92AB14278CF6D927B
-:109AC000DD6346CBE00FF8EA27B7BD7B39DE0B6DCF
-:109AD000623E8E57E4E3F0731E9BC70C7C5F91FBE4
-:109AE000EF3BB8BF0733DCD3DA1862FBEEBB2FBC09
-:109AF0008A60FE7A28817182FDF90BA260A77FE758
-:109B0000C21A7C36E7CF88823C6A0A7FDD916F4EAD
-:109B1000F70869CFC1FE91F74BCE7E59B69F47D962
-:109B20000CE751D2D41771B1CDBE3ACC03FFA2D607
-:109B3000FBE017B4DE4BC38CDE36FB1218176C8DBE
-:109B40007E31F37F26C4C6B9FBC2CB089BEF6529E3
-:109B500016F7D10CFB7960F1DC1F9E118575366517
-:109B60002F88023D3767CF70AC47C9B09E5561065C
-:109B7000A7CDFA17BB9EC39F793D0BD2E6C1AAB908
-:109B8000E9EF176B17788A2690CEBEA8759DFA1B51
-:109B9000AF6B14C7577588F90D361B8C8F824AFC42
-:109BA0005785D2E07C38D8DF1D21C5863C943CBC6B
-:109BB000DF727865E2DF659EE44898D79146B67F0C
-:109BC0007E9DDF27F5DBEAA630FAB55DE36C1EB3B8
-:109BD0002B3C909FE37F563BCFA70F26375A422C52
-:109BE0005EF3B584B3DDD2AA60DAFB4D28FCEE2A21
-:109BF0002CEC83673FFC7FCE70CB448FC3855B6BBF
-:109C00007478701B8C0FAAE1929BE983C34DD05BE3
-:109C1000A67EFE7FA1B307870E2FA4AFBF15BCFEA3
-:109C20005EE9EB1980D710F8F21FF03AC7F5E6D0DD
-:109C3000E025E4D81E8DDDBBE8EEE74498DDAF34C7
-:109C400051AA3B7C05C417BEA2A0BFF7F08E79EBEA
-:109C5000886CAFC7F4D9E1CAB9EB30DF351EC47BDD
-:109C60003C5F9363FF5E067187C5AC5DBF7972F898
-:109C7000BC14CEE67E4B6324F8115E8B5F3DE0FAA8
-:109C800048A56D5D989769BB8F4AE90FDFC3C4B8DB
-:109C9000A30CFC4D0BD3CF43E033D3B8C3C5E76B64
-:109CA000F1EF0F0B9F83ADF7D970D190E485D837D2
-:109CB000E492DEBF977101C0738FCCF2398EC2ABD4
-:109CC0007CB89F8C60A5A555A376029ECA223CEF66
-:109CD0004933D6819FCC7BF5C2AD618AB7D7AEC977
-:109CE00096BC367879230CCF3396A7B70B73233CF9
-:109CF0002FB7B7BD44E03E44773D85D7BB6639BB3F
-:109D0000978AA8E6D8C5B67375535CDFDDEDC74604
-:109D100022F8FD351E6F777FCFE2ED972E19B83D03
-:109D2000A963F7B950BA1B9BEE7E41C11F9DE14468
-:109D300034429FAF4B8907BF01743429C4E21E2A05
-:109D4000298478BDE8275725298DC2FD5D8F3116FE
-:109D5000FCB469FA291CA89F4C7015EB11E3002B89
-:109D6000C2BD2C74FF88FBC5329390D9B04FF4C6A6
-:109D70006E65870D191DE4F0FC999975C1E446B034
-:109D8000F354BA4EDB7CBBFE6BEEFF80EF5D876564
-:109D90007D53617F380C261F1670BAC955129BFC83
-:109DA000E01F5B21A5BDDFECF208FB3B251F847B98
-:109DB000E3EA38CE84FB121EB8E7E05A9EDF44483F
-:109DC00062ACFDEF8C7DC0E58ABB5DAEC2E2D1E442
-:109DD0000DC6CF7B76AD199B8E7F5EE57CFA41B8D0
-:109DE000C4919FB4247EAB07F873C9C2451E2304F7
-:109DF000DF99BCBC86CF638F96187B51A80F4E1994
-:109E0000E510874FD7914413DCEFB0A241C238521E
-:109E1000E90646772B36EC97D7D1E74ECE7F8B00FD
-:109E200007B6FE6EE578DDB32B300EE6BFA7D74F41
-:109E3000473BA6F3B8FE7E827EAFD591AB3683DF7B
-:109E4000AB5B22FCEF32FCA412F20DBA799E480BF8
-:109E5000FDBE11E63B6F24F2F7840D1FD4837CEE28
-:109E6000D2089E97FB8F762FFE7D0B412FBD72622D
-:109E7000C3478D907477AF969A0C7433B2A9EE1BDA
-:109E8000E9FCE416E7FB0F43F1AC7476AE780A798F
-:109E90002EEA2D560D4FBAFA57573AE59898F7081B
-:109EA0006FEA54BAFB1A7AE93039B0DEFB3597E332
-:109EB00002EFBDF83E927E5FB423C2E2777B9273DD
-:109EC000D6A2DEB2BC06C843311F01AF5C8BC1E92C
-:109ED000DA258A43DEAE5818749D476270FDAAD712
-:109EE0007808D671EFAE9726E3DF5174E987809248
-:109EF000D0E0FBCD24E50139715C31F0F97AA3F3B0
-:109F00005EE6D749E28EE9A03F1B94B47CF50CA72E
-:109F10009FD7AB565D83F36F567498FFB1E523AEC0
-:109F20002A07F952E5C17B828F35DF16BEC9B67E9E
-:109F3000A1EFDCF3FA6DF5AA01F5D6D22A27DEF6F9
-:109F400068CC2EB0AE647CB89ACA9BD9485FDD77E6
-:109F5000CCA4E31F4EE65CB4855527F0F71CAFE6B2
-:109F6000BF1F971377CEA4F2E684CCFC61D63F31B5
-:109F7000B9B1E4BE780BC4794F344CFB6937ADF707
-:109F8000325FDF5B0D03EB47373D4DB8CF793FE5DF
-:109F90008C234483F689FAF4FAE0FAEC2093AF6A52
-:109FA0006C1CC897EB36A4AFB709922B69BD137F21
-:109FB00055AAD3E56D7EA2333E59114FDFFE133D06
-:109FC000CCBE835E4A03E7BD59412EE7F47120A75A
-:109FD0005764986F575604EBBDD372FB7510EF3B77
-:109FE0002E3BE5F30FB278FC3C8BC9E713BB9679A7
-:109FF00046029E5A251DE8E1EDECD824A0B795CD88
-:10A00000C7D08FF02D5EFFBA50FC43D04F4B8E2C43
-:10A010009E3F92E2A56B3989494666F9FF31E79F79
-:10A020005C85DD6340F5DFBBA0FF68D377D1FE50D0
-:10A03000CD715F9BCCAE6C84BCC213B2B506F3503D
-:10A04000760558DE11894DB7DF2F13E0F338B17B69
-:10A0500078F8BE261E1CD08E3F4C3A6A70DCDD417B
-:10A060001DE28F872B95D4E57492EFED0EE23DAFA4
-:10A070006EBEC834FE70EDC013BB8767070EB6EE28
-:10A080005856E190ECC03395F7DE59067CA4754C28
-:10A0900049277F859C7E8DFBADDCF4239EB3393E42
-:10A0A0008E27079ED7CDF73BE7735D9D733E825F9A
-:10A0B0008E279B02901F4E479F6CB74BC9BCE9830C
-:10A0C000E859E6FFCD34CF389FA790134079104F61
-:10A0D0005BCDE5CD5B0DF746EC7870AFFF84CCF738
-:10A0E000070FB1BCADF1F19573461A7DF4795D1699
-:10A0F00093439F375D0A3DE3EEE7EF9D0E859E1B80
-:10A100008C0E855C70B7FF00E2FC23E1EFE3E81AF8
-:10A11000C4653E8818AC4CF40570448694F373CB48
-:10A12000C41807E76E4EEC0AE0FDF6D6166F12FE75
-:10A130006EC7F15D974CB2AF6707C7FF8A25D97824
-:10A140005DCA713976C528CC2F50F0BEAED78FE4EA
-:10A150002C80F2BD876490D0E4BAFA950AACEF8106
-:10A160002C9677BE62C32B680F0E97CE57D439F565
-:10A17000FF277C1DBD7696DA5306F493090EED5940
-:10A180003EB6CF892F9A0FF279D50609E5ED962CC8
-:10A1900003DFAF524D94DBA499E947E2A3F0A02A74
-:10A1A000E4182C02E0F1BFF9DF2953E39AFD7CD2D9
-:10A1B0004DDB6E9F0FF6A19B5F46EB8C8EE15E3010
-:10A1C000785E174A3C9935B24F3EBF2DD5ED1F45FD
-:10A1D000AB5C9EC5ED6DCEA7623D9767B1F5513B77
-:10A1E000ED87F8F799F8FA48CC456F7247CD4F00E4
-:10A1F000FE737C681704BC54EE43DEDCF7033ACBF5
-:10A200009B637C25EC1D77FB6BD584C36E3C94551A
-:10A21000E8C8C771DB21FFD017E9EBFFF96FAC2F5E
-:10A2200064FDD3E98BFF0779B222080080000000AB
-:10A230001F8B080000000000000BDD3D0B7854D59B
-:10A2400099E7CE9DB9994966924932933738930080
-:10A250000625780321449E370991A0A803040C1A0F
-:10A260007044D4282144C54ABFD2CD0D893120DAAB
-:10A27000505DB4D67587885DB6D235586AD1D2762E
-:10A28000B0828FEA365A45DA8D1A1FA5800FA2AD2B
-:10A29000ABDB8FAD7BFEFF9C93B9F76626046DFBAD
-:10A2A000F12D7C7ED733E7FDBFFFFFFCE7B0A22591
-:10A2B00085449D04FF7C49FF3B9C1A20C44FC8F194
-:10A2C000BFCA8DBD6E428E45DA93AF81AF4D5D90B2
-:10A2D000ED2344EF94C9A3B4DD3B473EAD81F2BD0D
-:10A2E0007D36AF44CB2BD65F238769BB4C28F9A1C1
-:10A2F000DF9234287F097FE60EFFDEF0804CA2C596
-:10A30000B179AF867518CAC77A923502F3CDF14498
-:10A31000C60709D9AB109D9411F2F6E6ECC8265A8F
-:10A32000AE7112DD3D8590B9696CBDBE8D9FB77A67
-:10A3300027D3F5F4FCBA8414D2F5DD7DFB8AF0A4B2
-:10A3400038F37B6D844CA3130402369245C86D7CB0
-:10A35000EFAB528906E3133ADFA386F145BFC3ADE5
-:10A360008444CFA5F5E368BFF2583FEBF8CBAEBC11
-:10A37000702CECFBF09533C75E3329D62F111C9659
-:10A3800049E17F5E0AF3B6C92AC075D73D498D3DC4
-:10A3900071E0A673B85AE7873F76BA8F25FCFF971E
-:10A3A0006EACBCC34341B22965CEEC709CF90F93EF
-:10A3B000F0DDD3E87CFA46369F759EC57C9EC3F5DA
-:10A3C000D72E05F87FA6CB5E99C263A0414EAD8023
-:10A3D0007EF50E753C1D7F40BFD5739D619DBF4FBF
-:10A3E000009FDF375EEB898B07FEBDA2DE4C076F57
-:10A3F00093C197A7C33C3BE3AFEF16581FC5DF31AE
-:10A40000257CCF85747DC72F96559DAEE7B88DF618
-:10A41000037A7990F60B0CEF773DEFF7F6C691E9EA
-:10A420007249AD793D4B8F249BE9D2461A7BE3EC10
-:10A4300067685D6748F72B2CFCB74B191CE3A5FD3B
-:10A44000DFDE71EACDDB613F3B9211DED67132D3A4
-:10A4500065C6A7C02700AF2D499C4FBA9B9FA6FD9C
-:10A46000DEBE344FDD4486F30721DD97CDA0F5FD38
-:10A470003DB6D22DB46A574F4A6324CE7A27A7330C
-:10A480003AF0C97AF279B43D7983E103C80DF866F0
-:10A4900029A7376FCF0F5B882DD6EF0DA0832442FD
-:10A4A0007EDBEAC4EF36AF13C7A95BB84809D079A1
-:10A4B000AEB3130DE0877FE8B8DEF30A766CA153E4
-:10A4C000BD6E63657D15E53F69F87A1EE674B92BAC
-:10A4D000B27844F8D637C82678D62D34C3D74A9FE9
-:10A4E0004723B6DA78FB17F49C68BE2B1D113FE0BA
-:10A4F000E908DFEF61BEDFDF37B67BA0BD759E5D8B
-:10A50000919E11F9E0AA46335D9C6E9F6F7A830895
-:10A510008FE56173BF2BEACDFB5D4A5A66134A2A69
-:10A52000CB88EA806F1D6929799A82F2E8034B7023
-:10A530003DAF13520B729E9CBAB56451496CFC1727
-:10A54000393D7F5677EBA5202EDF505A4ABC71D695
-:10A55000F33A8793C0F7EB09E019E572F70DC033C2
-:10A56000D0EB32392E9EFF8BCFFB46C3C87CB4ACF8
-:10A570006E643C9FF07A113E6F34B427C33E8F89DE
-:10A58000791F64F3825E33E2E3C457D45B56FE1D49
-:10A5900020FA4D48C791642FE8111F9087418F74AE
-:10A5A000A4DB981C2F1E598F88EF6F855CB5B4AF64
-:10A5B000B36B0E233ECABD01849B28D72D34AFF365
-:10A5C000BD54060FCA7163431E83DCE0FA55E8BB35
-:10A5D0007B7F70FE5BA03FC7A7333CD4853E7100F4
-:10A5E0003CA87CBDC303FB7AD5E605F95A7E4473CB
-:10A5F00018E137278DB53FBE7364F8CD4963EB3C56
-:10A600009D9CB5EEF7ED6FDF3905C67DFBDB9F3B0B
-:10A610008CE32FFB229F443363E5ABEB252D1287A0
-:10A62000CF36789551C17D83058E577F3116C7F798
-:10A63000C9A4A537CEBEECE94E6CBF3454E9F05343
-:10A64000785EBB5152253A84239DC9DD6B85BCB32E
-:10A6500007C62EA270F7B7B7DC168A33CE6C0EEFA2
-:10A660003FBB4369F1F84C7C853E17ED96D9C38E0C
-:10A6700078EDAD7A7580F3B9B55DE80CE971C80E77
-:10A68000B2B41FED3AE6A6313ACC4C8A7E04F28889
-:10A690004C32DB61A79DD7D2DE3AEF651CEE89E62E
-:10A6A0001776AD757C9DC33F1CA2F413B7DE83F50E
-:10A6B000AF12A65FF5480AEAC3633BAFBD07CCB74C
-:10A6C000EB17DC7608D4E4CBA9416CD7107AA50649
-:10A6D000D9EDD4BD9301EF9FD5DE7B4F195DDA71C3
-:10A6E00025DCEEA11D8E6F92D06EB1CEF32AD72756
-:10A6F000AF813C3D17C623CC5E9D4747CBA56097F5
-:10A70000B5352054C8B79202463BD5B7E1F356326F
-:10A7100019EC87D0260FFD7DC2C64FD6835E262456
-:10A7200082FDDF75A83722BC09B373FB7BDC3BB627
-:10A73000D076AF825C80F1893A3654629013762FDE
-:10A7400096478B9FDF26C0CF99CA29B1CF44F350DB
-:10A75000C8E3FA1657B9BBA434B07702D7C17E0656
-:10A7600017B8BC3D14858B15ED1280CFABAFD86CFC
-:10A770006D411C16ED15611F072F0BDE755E19C8A4
-:10A780001F87E6A24B5904CECB85948EAADC3A8C67
-:10A7900057F6DB858F017EEEAD4F0AC830DE9CC0D8
-:10A7A0009B322D2FBE3829007E47795FE1011F1DA6
-:10A7B0007FE942C94B68FF790BC6FB07E8FE5236BA
-:10A7C000D071F26079C76AABC711F243986C066129
-:10A7D0000BA6B0582CF1B2EEDB3C8FB63FCFBFD703
-:10A7E000E6A6A09EF85DDF66271DF78EB6508E3771
-:10A7F0009DDA13E91F743967139295A5F5CD5509B4
-:10A8000071677C540BE5BD0F8AF13EEED20A08F960
-:10A81000992D1C9468FDD48CA405760A2F5F91981D
-:10A820003F6FB3368BEEE7E21B1F5D4FC75FFEDD68
-:10A83000490BECB0EE06317FE90258DFD259A25C39
-:10A84000EE82B22F85F787F55650F955185BBF3D5C
-:10A8500087CE9F21DACF58308FF63D5CD9526DA755
-:10A86000F3FFE8BBDAE649130999BEB0D2ABD1F2E7
-:10A870001319F50B52287EF6124AA7B4FC64C6954C
-:10A880000B60FD3ED9C6C7BF6A33ACBFBC413F0FAA
-:10A89000EA257DE5E65ABAEFB5CE814340AEEB3608
-:10A8A000E8CE2CFA3F2912E363A7A345CBA7B073E8
-:10A8B000ECAB8CE6E372BA19BD16444B408F0D9594
-:10A8C0008B69B9C450CE61E5BD9BC8D5F1E4ED6D8F
-:10A8D000994CEEED4D8E5FAF64307B80C20DF54933
-:10A8E000DA11A2ED8EA3573E4A77E37C079389EEF7
-:10A8F000CC88F1DBE594872B285F12275BA71867CC
-:10A9000098FEC8607287E89767803C5D0843D0ADC9
-:10A9100017A912FABBA42525321E688744ED4B40C7
-:10A920007FC8365CAF5F96AE5E44C7CB4A26E13D3A
-:10A93000F4EBCF2458A6FDB53DEED8782F71BAAF11
-:10A94000290AED84F16AB2734BDB83B171E8BA3B3B
-:10A950009C534CEBB6576440FDE2D29B2719E0397B
-:10A9600089ED83D201F6A3D33C3697F2C1DEBEF364
-:10A970000AC17EFFA945EE96F72D7610DAEECA4C95
-:10A980002E5F02ACBFBF9AC99FC19B53223DC09F9F
-:10A990004EB53464B03B031C1ED5772EBC1FDA3590
-:10A9A000F53948126DB77E4F653619412F367D3126
-:10A9B0009344A61ACAF6A80272A7E98B39F87BF568
-:10A9C0009D2F29C0A7304E80EE6BBD4BCB56016E3C
-:10A9D000EDF1F14F1D725C47D317E9449F6AFC9D6E
-:10A9E000C12936BE0FEB4FB7AFD8783289648E34A9
-:10A9F0009E82F54370B773B82BF1D7395FD02985A4
-:10AA0000B7CD405F4B39BD51E9877194FECB26F538
-:10AA100080BC8FCDBB09C7DF6BA778043BB02F3953
-:10AA2000007671B99DC9CFF2BE0CAF2EC5E843D0F8
-:10AA300085C0EBDE8C964ADCEF22C9DB131CBEAE70
-:10AA4000CBC4BAB83ECD6E08CBD718D627F8818EC6
-:10AA5000BF978F5F5681FCF32F4CFF50BE5901FC0E
-:10AA60000B760BEC438D962CF60C5FFFCFA8EC8099
-:10AA70002FC52383FFA5EE08E80101B7E1F0CF3F22
-:10AA80000D3EC7627D79DF330AECB32901DF8632E0
-:10AA900053B15FF691682AF8B5BF4C677A6D6FEFD6
-:10AAA00054D74CE08B853602220CF60DF66AB9902D
-:10AAB000B764D70B5576FAFB5099CADB00E06148C2
-:10AAC000FE469DCE58FBAACC5D0B3A689D2F89E2CD
-:10AAD0007F12DAA14E62F027BE9DC1E4584598C4AA
-:10AAE000B55B966532BB45C0FB7B1BAAC97B747FF7
-:10AAF000CFA533BEAC18D025C08BE06BAB9C7A8859
-:10AB0000E3F17BFCFB8F9753D269E4D4222EA7D8C4
-:10AB1000EF07A9990FEDB2B2A22512D589AB5E98C5
-:10AB20003A1EFC995B72E4C0FB94AF9648EA981F0A
-:10AB3000D171EB9C018C93093AA923CE801BE04E86
-:10AB40008DA62F41EF2F746119FE805DF269B7C4A5
-:10AB5000E89004D2EA4A12CB21B18E5B72149C6F4A
-:10AB6000D5E6F16961E3FAB89EB83C29FA2352347C
-:10AB70009CCF4599AE7FAD4D36D4BB993EFBD0A35B
-:10AB8000FD3483E2E15589D4E37A2CF6D26F78DC88
-:10AB9000C66A2FD5733BD20FE625F2B10D9DD3ECDB
-:10ABA000AEA408615D74F053B37B09E7D7A8ADC9C3
-:10ABB0004007BFCE286076ED15B4F202CA94CE6A83
-:10ABC000ED7D831C7B1ED6837A213A0DF8F4A50C0B
-:10ABD00062B2F31AE4508104766B76920A7286E2CE
-:10ABE00009E170D045EC2E3AEF73F40B78AB916F1E
-:10ABF0003EE0F0011D486A3B427F07F75B4914F4D1
-:10AC0000CDE57353D06E25A76E1D07F10A7F0AA309
-:10AC10005B3A8E938FE3443AE172EF376327F68015
-:10AC20007E12F253E0819C92713C517F505A54E065
-:10AC3000A5E583FE734BDB25B3FD03F650CC7E5AAE
-:10AC4000BF793EB597A6D7F6466D5E902AB72FB866
-:10AC50009DB6AFA1F6938BEEE78F194C0F1E0CEA51
-:10AC6000722A8C379EEE83FE7428393CA9C51DC319
-:10AC700007B571C280BF2C857EDD8C3FE0DB99C9B2
-:10AC80009091E163DF06FECD4A65ED87E93D5EAF59
-:10AC9000490CDE5B2A999CB0B6B3F171D73AF5DA6C
-:10ACA000AC42A37D1522408776C2EC2C19748F1F0D
-:10ACB000F519C2ABFACE8634D09B9FF52D4D239368
-:10ACC0006272D4E1FCEDD8F7A91C899225DF017EE0
-:10ACD000555E9709D8CB7738185D2AE9616F06FD74
-:10ACE00066A6C4F79B27F2F564825F4DDBDDC3FDEA
-:10ACF0001EC717E7A3BF9D9FC9E245A9397528D78D
-:10AD00000196018AF73432A87B0D784CABB099FCE0
-:10AD100007C71793B1FF99DB0FA509EC873293FDA5
-:10AD200020E6B5DA116FB6E6E0FA45FF1539AFD582
-:10AD30001043FB9564E00E186FE5FA7C53BC289134
-:10AD4000FD3137531AB217F4B8EB524CBFBF49FD6F
-:10AD500045DD38FF31367F6CDE14CA70B179E54CC1
-:10AD60004DCB44BF6F96F7E8F9F4E3A2BFCBA877C9
-:10AD700050FE53FDA4ED70A35EAA05B92DFC24E09E
-:10AD80007F6F1AF077656DA6DFA027793FAB3C3A5D
-:10AD9000C0FDEA035CDFA41D117663724092627A03
-:10ADA00067B8DEE276B1453E9ECECEA674AB1BED13
-:10ADB000806178CEFCAAF6655102FA98F00FB12FA7
-:10ADC000CB6785E512909FB512194F3FD3E799F5F0
-:10ADD000BD9EC9FC109D329CD16F59DC606ED701BD
-:10ADE000EDFCF04D1995DF62D447920C728F8DD730
-:10ADF000CCE92178E2552540E57094DB43BB7CDA51
-:10AE00005D40171DC9A993414F74248F8D405C622A
-:10AE1000C7FF5617EFA0EB1F7CD9A1F6C0B0FB18F7
-:10AE20009D542E5FDF6EA7BF3B7A256F1289ADD38D
-:10AE3000BD41D256533EBE9FCB89261FDB4F932F79
-:10AE4000AA8CA3F3E735B17514F41E90EC0679577C
-:10AE5000D0C8DAEDC87498F4CFA350A6E33C22FC26
-:10AE6000111269AB2983F69A1DCE41F27A258C0F17
-:10AE7000E7B55040507AC853D9F86E35225D3B296A
-:10AE8000B6DF2EDBA249A027BAB25254D013277DD9
-:10AE9000E1C760BF4DFDD128806B7A7F9F1DEC3DDF
-:10AEA000975FDB0DBF8B7D06646F1EC8D9947EB69D
-:10AEB000BE6E0BDD1372175F570F93BF32799E0082
-:10AEC0005E4086D0F9B23615A39E12EDB332B8DEDD
-:10AED000C822E127D0CE225D04F146701F599B267F
-:10AEE000A0BD2FF01AB3AB264E01BBAA686BD4BE2F
-:10AEF0008AF67BFAA1F8F1FA17399FD07D1C34EE5F
-:10AF000023117F08BD26DA3912F8D582EE536AE3A1
-:10AF1000DBAB5413607DE572DF95B0EFA60E8524A0
-:10AF20004931F8BBFCA12320B7F27A7748001B2BEC
-:10AF30009D7564FC50CAA7FBBCF546E29549E275D5
-:10AF4000376D90B5D5467EEE5018DD28E6F33DE12D
-:10AF5000677CC2E305B3FDA163008FE67DDB14C00F
-:10AF6000F38D3BDF51463AD7192DDCA446E6BF34BA
-:10AF7000D53B23B0DFCAE576C4E39A0E2502F2A9D9
-:10AF800069F79EA80DECEC8D4405FE6FEADD732891
-:10AF90008FC227BF499B260762E3E5374524584FF8
-:10AFA0001625C63EF4FFA20AE86D2B7D839D0CF6A4
-:10AFB000CA2117E3FF0F2BDDBA44E1F8A123DC041B
-:10AFC000ED3ECC4D51F5600CEECFED99FFBC4459F0
-:10AFD000DCF3445214BE5DB69E1C276DD7759EA24D
-:10AFE000023DB9FC618F8FC229C31EDA0BFDD37DF0
-:10AFF0001EB58DF60D249129A8AF470987E916BA29
-:10B0000098BE91F1CB5C5FAAB003A7805C3AD7E70A
-:10B01000117614CAAB430EB68F0EC2D6DB99A915B2
-:10B02000C07A883703E7CD6B8A4AE00758E78DD1AD
-:10B03000955688ED47BDCE5E05E4FC1A2E6F2A9723
-:10B04000EF94DE33D041A98F9DCFE6EDDE21817FE5
-:10B0500048EBDB6A7CD89E2481BCD9CDCE29D6D0E2
-:10B06000FAEB0CF245EC238E9CA980F5B9FBFB9E14
-:10B070006572268AF427D66BC5E73C1FB3EF2EA274
-:10B080006602FEAEE8C5013ADEA1C2641C4FF0BD07
-:10B09000954FE7F9189DE7D5EF94209EE04B61F6B8
-:10B0A000A4589F68B7CB5755EB4338F4211CD6D62C
-:10B0B000DB116F623D354A681CF865CBF878CF5CD0
-:10B0C000F1963240CBF7FDF415A4C7B5DD9286FEAC
-:10B0D00042F72BCA5288DBE9FF2E439CF61266A288
-:10B0E00090ED3F7905F5CA257B59FC60EDDE3DF614
-:10B0F0006BDD313A0D9E786625D0D9DADE24E292F6
-:10B10000007F01E4532B9D523983744F7405CFB9EE
-:10B11000A89CD451AE927010FC1421873B397F1348
-:10B1200037FBFD46BE6E316E4C7EBA90DE8327A69D
-:10B130003CE3A4F05CAB4AAA0BF891C39B8E1F457D
-:10B14000394C4821F86B627C2BFCFE99DBED71F0E9
-:10B150007C1BE0D9AA4F849E0D3E5C45E02BF06736
-:10B16000E7701FD2EF3E05D7DBE1B3333D5FC9E2A5
-:10B17000DA1D0EA6473ADA9C11E0EBE7D22F7A5E91
-:10B18000A2F2D293A144E17BD0B6AA09EA0FE6B1BC
-:10B190007574D93615B7303D76870FF1974A987C8C
-:10B1A00062F2E8BE1F3379D2A4BBD17F6C0AD7AD5F
-:10B1B000C673099F4B857309127E5659EA89D1835C
-:10B1C00015BF81270E28015A7F492FE38318DC9889
-:10B1D000BE12744BE51CE2BD33539C5F868300575F
-:10B1E000EAD7B741FC41F8F5A90D21DD1318CEAF20
-:10B1F00099DCAF9FC6FD7A4785F36FEAD7AFD9F0E8
-:10B200006BF4836ECA7901BF825FA8FF68E2AB2747
-:10B2100038BEEFF731BDFA948FD1D59AB25EE4878C
-:10B2200035EFB7201FB96B993C71F79BE52021776B
-:10B2300073FB602B8E5393D27B910C7EF2BF4ADE60
-:10B24000769278DD37482DFF097932640FCFDF38E9
-:10B2500045ADFC720A571787016FF76B1FF3B73EB6
-:10B26000DC4511017C696F5146B2874F372E89BE8C
-:10B270002601BED770587FB8BBFAC23F409C7157B9
-:10B280001AE6B37CB07BC937FF40FB7FB873AE0AC8
-:10B290007ADAD71E42FA19F4BB54882752F1592B97
-:10B2A000517A68EBFD55EA4C382F7BEC8229203728
-:10B2B000DFE57C79E2C7F20680CFA67F7B7C0ED4E7
-:10B2C000AF894899603F7EB8EB5FFF0A7AB171E7BA
-:10B2D0003ACC4B6B7FEC976897DB223BD8EFBBD225
-:10B2E000D0CE3CFEC8B63900F7F6DE76AC3FF1C8EA
-:10B2F0000E2C3FF36F8FFFE22F60778452556877F3
-:10B30000E2C7DBFEE92F40E775A92AECA3296C67A9
-:10B31000E7B982BEAD726BCF01E453412F9780DE57
-:10B320000538D533F923E8F95D7EDEB4AADADD0508
-:10B33000F2ECDD2D9EC6787146C5CFF002B11894AF
-:10B3400063F512C6D9BA28D540BCA32B9954C0378F
-:10B35000655254C9A7F35CD1B0670EDA3DFA3BD70A
-:10B3600043FB25FB5C640BC6E520A84BFD0124755F
-:10B37000424AA8183C4AFD663AFACE2F29DD1EA69D
-:10B38000F201F58EC51F58D2F5C2FF801CAD730EB9
-:10B390001C0051287EEFE2F11BDA1EF54EF9FAF897
-:10B3A00071D254BF9BD32DD39B797B171504504E7C
-:10B3B00024A9E30DF6E998232D5B203D29AFB1EFD9
-:10B3C00022D8C7C5C5D74C45BA80F81FE81FDD8D08
-:10B3D000E3AF85F825E5BF73FC3C2EE225BE19746A
-:10B3E000FE1A3BF1B9E14BC86B0E94238FE2B8D43F
-:10B3F000FE40BB2AF0CB2B1E057B64BB239C3B0D80
-:10B40000C6E9E27A6B275B37EDEF8573543A9E7796
-:10B41000C6141CA7CF9181FD75D67FFECE3629B606
-:10B420005E4AA963416FC178656ED0337A3DE227E9
-:10B43000A0E0BE4E40935CDCF7E4152531FEB5C6B6
-:10B440007D409EC1F9F06C7F65857F5AEC2BE2410F
-:10B4500056786EE4F53FF36BF825BB324D7A2591B3
-:10B46000BDF2CC151F33FDFBB37750DE34031DC393
-:10B47000FCE1F74DFAF75A41C74FBD83747CED3EAE
-:10B48000A67F9BF7952A40B71FB46AE43D6A8036D1
-:10B49000F3F3D7EDD2C0F598EFF294CB0B71BD8FDB
-:10B4A000B9BE59B3F59DA3706E5AB82F17FDFC8F26
-:10B4B0009F72D5C338076D3684E7C19EF377B44BCE
-:10B4C000C67532BF80DAC148AACDD44E6576F0EA9F
-:10B4D0006DE0A7AD6D242AF07FB3857E9AF7BD821B
-:10B4E000F422ECE0E0C38B5733FBD3A5BAC08F9BAB
-:10B4F000C7EC5142ED51689F3E2FD2A6207D959614
-:10B50000037D3D73C52F3A418F37CF235E187FFBF4
-:10B5100018EDA97CDC8F4420CF65BBA3BBCA4EFBD2
-:10B520006FAF0978292429DC76A2DD4B8A15AEE7B6
-:10B5300056A3BDDC9C73958A7C6695074FB5A1DD4B
-:10B54000D51C48C6F55CB24FBA85D9236EC2D62F3A
-:10B55000217D5E12991981F8D9471C7E028E1F3B0E
-:10B56000FA56023C3EFE0925445A7FC93C46AFE9E3
-:10B57000F37A518E3CF7D47CD4E3822E3D4F26A142
-:10B580003ECFB07B2515F5DA9224235EBB1D4C2FF0
-:10B59000A5733D53B495E1B793F353A7DFC6BF8AB4
-:10B5A00039FEE2D52783DEFD88E31FC508C8772E64
-:10B5B0004FD6AE8E223F35ED66E3F992B4D25B0DE5
-:10B5C000F4EBAB667A519C07C0F9C0A238F2E231C5
-:10B5D000BE8EE0C3ABB681BD7C31C53BA894BC62D6
-:10B5E0002E47295D00DCF21A43480717FB6E5021F5
-:10B5F0003FD59F49D05F1C6C5348BCB8CFE35C8EED
-:10B60000FA3343651087F6677BD0CEF1CB953617BA
-:10B61000F42B95D49E009E7BA29D37E8CF557B4CA2
-:10B62000FC1E2AB3D176C7B23C0CCF91DFD8179756
-:10B63000001F06D8B816BB6FB8DFCDECC685DDFAA3
-:10B6400064F043C4B9868043A42DB9DE283F7FC28D
-:10B65000E11099C8E2A9D4BE77635CDB4BE701FF38
-:10B66000BE67E623CCBF6FC7760FFB997D5443F7C7
-:10B6700007769BBF28B49EE9538F1A0F1EB3FDC2F5
-:10B680002E5F590A7E65739D5B057EBBEF67D22AEC
-:10B69000A467081682DF1D5E8D7820140FC00F246A
-:10B6A000CCFCD2E69650243EBD2F42FE6B06FE93A4
-:10B6B00090DE310E4FE93DC2E89DE93FE1FF837C1A
-:10B6C00034E61D0A3920E44BB3323001E858F04328
-:10B6D000F39C810900B7D1CA938F1D94FF817F2805
-:10B6E0001C807F04BF789E667CB2A52D5009F55B57
-:10B6F0006A88B7DDA08FACFE12AC13FC4E21D74F89
-:10B70000FA42C7FD1007B0453B21BF42C8E1E6A79A
-:10B71000374F8897FF26E4B0D3CEE49B339212696B
-:10B7200037D0179CF979A6E017F3795236C48F8F7A
-:10B730009CF2BB791C7F74F91259A0CB41DEF4A4B2
-:10B74000605EBB881759C7FDD82F99E232C26F815E
-:10B750007307689F93C5F827258BF3679688CF46B4
-:10B760004CF41FB085DF813CA344FA4BF4FB5BC56E
-:10B77000AFC43C428F5AF12FCE4D603F8B26256ED1
-:10B78000D77D80C9272B3D4EE47C72147C0FDAEE06
-:10B790003FF839D770FCB2714878A2292FAECBB6EA
-:10B7A000A7315E1C4C9C779087268E2AEFEE402BAB
-:10B7B000CBAFFA0F9E674B564F34E559B9D5401BB6
-:10B7C000C451AB9CC15219E765712CCF1CF209E83A
-:10B7D000E1C9FBBA8B217FC91F329F9764D7279B92
-:10B7E000CE2372C319A6727E639EA9FD989642531A
-:10B7F000FD391BCE33D507F529A67251D70C53FB63
-:10B80000F1DD55A6F2B90F5C6C6A3F31B2D854DE57
-:10B81000D2D65B0F78397FD795A67E5576AFBD948B
-:10B82000C2B5A47795397FCC02CFB4BFCA71E9B055
-:10B83000292B8878ADB29BF3882FD8678607A4CBD5
-:10B84000019C27133EDE9C635346CA6F9D4CEC7FE0
-:10B850001E10FD83C3E9813807D4501C3F53D0B973
-:10B86000285BCFB584FC3853FA4BB44E417F89EA4C
-:10B8700013C1ED3B9CFF055C1C4370A95747828BAD
-:10B88000E3747021142E9EAF0E17EB789B529A3101
-:10B890004FF8352818ECE38156F37D98657A1AD372
-:10B8A00043A125A7B1A3591C389CC4CE2BADF5FFED
-:10B8B000C9E1F2218509E261947CFD16C7437F222C
-:10B8C000BEDEF0C9C16C90DFB504FD666F4BDB27AF
-:10B8D000A0B7AEB64709D0FF7D7C3FDB79BEE80359
-:10B8E000AD5E1CE7417E1EF9506B007F7FB8B51836
-:10B8F000BF9156157FEF69ADC0EF4E6ACFC1F70714
-:10B90000ADB5F8DDD51AC2763F6CADC7EFEED630D7
-:10B910005BD7307C9172B473429971E3A5D7E8F29A
-:10B92000A8F044E482B8FA32E13872C388F9E51B22
-:10B93000FAA5C79F35F0EF5B591EDF51C86D9C4ECD
-:10B94000A6C3F9E6E9FA7FDE4A1E7F76FCE8F948ED
-:10B95000D013399539211E5F87795EE563DB57DDAA
-:10B96000A54F4A0CAF189DC587539DF3E33C70D695
-:10B970002783CD60E82FEE9F88725D382DAEDD9075
-:10B9800097CDF46E7D123B8F5F6EE1EF6F6533FAFA
-:10B99000FD5636D377BF4B2067D2793D5DA703CFE5
-:10B9A0000787F1DD3DB3E3C1F7AEEC80292FC57AFF
-:10B9B0006FC53ACEEF1CDD63D4387C76BA71C4FE15
-:10B9C000ACFDAEE2FBFF663661EBFF7FC69FBFBBFF
-:10B9D000CE83FE03C0CD6FD8FFEFAE4BA98F179774
-:10B9E00069CF66E7A1D43A27C10C34F575056CC55B
-:10B9F000621260E7BEE3BC101F12790189E9D58E9F
-:10BA0000712484A13C1CAE141F01A5888E6F1F9A5F
-:10BA1000276A8779545B4CCF42AE0D31DCFF9087AB
-:10BA2000D303EDAF2B98D7339007EB3B537A22F239
-:10BA300043E3473AA71BD6FF0CE5CC9AECBFAF9C7B
-:10BA4000117C4E4EDD3B3E9E9EAC87B967507BEC31
-:10BA5000FE87989C39CDB8670ABF7A7900CFAF4787
-:10BA60000DBF7DBE51C5A53E77A54E26D4AFDBE008
-:10BA700064DFDB93537BE0FBB96B6C84A4527E8163
-:10BA80007552BED5AB08BBBFF596F09B5AA683BCDA
-:10BA9000DD9E1B7A309B8EB34A61FEE29FB2B4EF0B
-:10BAA0004339999F0B27F37361255BE98432D18A6F
-:10BAB000715F17F07D75DA0263615FEF4BEA44F066
-:10BAC0005BBCB6880ADF54122D61F9799130F86BAE
-:10BAD00099E72707C0DF4D9E40481FC6C75517C4CA
-:10BAE000D19494C117C701FFFFD286F7A21FF7B206
-:10BAF000753EFE403E9EB350818FF26232FC4EB7DF
-:10BB0000B205EC72DAFFFB52F8896CBAAFE35EA7BC
-:10BB10006EA3EB9ABCF9BD8C0CFAFBE3FBABF05CBB
-:10BB200021BA4BD615B8DFD0F7E1772FA1E35DD06E
-:10BB3000E7C0F8F3054446F9BEC64EB6021F25829B
-:10BB4000EF07DF889F07E6C8914CF95DD6FAF7B991
-:10BB50001EF82041BEF16BBC5EE4CF3844FE8C5F22
-:10BB60001B317FC661C99F71D84304CE851D43F93F
-:10BB7000330D04F367E838C6FC990FAAE2AFA39F20
-:10BB8000CB73C7172909C64DC5DF3F281C799F8E87
-:10BB90002F5CA67CEC587F37FE9E287FE73301A7F9
-:10BBA00004F94B9F0CAD2F97E899C67E8CEF62F39A
-:10BBB0001460BDC3920714AB67F93F1DE98C4E0EAC
-:10BBC000E4787DD7D0A1AF2103789FF36AB7CF0186
-:10BBD000F1A41051F7E0FD1EBB637040F06121B489
-:10BBE000B3BF0B76B78D4A5EB0BBAFDEE07877C0EF
-:10BBF00020B71669E63281F60639BC1862D8741F80
-:10BC0000C9E71563FEDFA72490E61D418E3638E5AF
-:10BC100090DDB08FFE0476C4859C0EFB73E3C3AF4A
-:10BC200030C766CA631ADE9FE703F07B68B77A47BE
-:10BC3000969F00DF70A6717C2B1E7C587F3A38FBE4
-:10BC4000E1B00DE26A9512CBF3FF9BC33B9DE7BBCE
-:10BC5000B1FB030E4BBEFAE25CEBBA59BEFAFDE94A
-:10BC6000A19939D82F30C1785F60AF5D4B9942BF41
-:10BC7000FD5CEE58E1B289C3D9BAEFBD3CEF3E5945
-:10BC8000262D7B0CF0B7EEF71B398CCE45FB0E074B
-:10BC90003BCF02C1E7A4726F0561726F454E21CFA1
-:10BCA0001F4FB703BE1AD8106485F7109E2F0938AE
-:10BCB0000F831F87BB158E21125809F9DDA783E773
-:10BCC000865C6D450E9DF79A57921590FF2B9D83CC
-:10BCD00007C1671DE8B31D1E47BFEFB8C71DDD498B
-:10BCE000E03CAEF8C967E837B542657915641EDAFD
-:10BCF0003F929E2F7F79FEE8ED9FCED47031F0C742
-:10BD0000FB3C3F5BE8A5CEBC131320CFFEBD8CCA25
-:10BD100029B97E8CC36B9940473F4F6274F4001D74
-:10BD20008996D7FD6222DE87BF2A37AC423B91E776
-:10BD300047B4C109909770A670A27F1C4047A783A3
-:10BD4000D39A1CC2F831353E9DF4E4B0F8DFE9F82F
-:10BD500003EFA195FDFDF843C0539C6388F5A9B995
-:10BD60008C0EC557C0CD9A4FA4E6DA783B96AF78D3
-:10BD7000556E08E17C72CC27475D74EDFD4AFCF7F7
-:10BD80001D9E1CE5FE05BCFF5E72B83F39FEFA5EE3
-:10BD90004CC0C7FFA8F54DCDE5F43339FEFADE1EE1
-:10BDA00025FC4264F0ADF4BF831EA3789E0A78267A
-:10BDB0001D83281FFB33E2AFF3AFA35E67D8F1F713
-:10BDC000D0B782BE897E4D239EDFE724C73DBF5F8B
-:10BDD00046FD29F087ACE7F8E2BC9ECA0FDC6F9DF8
-:10BDE00073706526E07D1EDF771689A6C3F9E62FFE
-:10BDF00092F03C60989EE4FC41E195920BFA64E17C
-:10BE000020C635FA27C4970B29B98CEE86DA77B1AC
-:10BE10007912DD43C8CC9546750F819485311E5843
-:10BE2000E97447658A875B383E94FC9B54B00F2BBE
-:10BE3000735E3A02FBA4F0FF70089E86FCBE13AD51
-:10BE4000CF7BC73912CBED35F213E52D71F63321D7
-:10BE50002B3C21D7106F5CB3EB05EF3803BE4AC80B
-:10BE6000808DDDA31EB499FCE46C72467EF27E17D1
-:10BE7000E397F73242A80F403F80DEE97CFAC252D6
-:10BE80004026D81990DF33E8494639DA9E37A3387F
-:10BE90006080676DAEB02FE50476E3D7BB1F10B3AB
-:10BEA0009B2493FD1A1BDF8EBF0BFC54BA5F8C8B57
-:10BEB0008F0959DAA500CFBF646897C1D70A3FFD43
-:10BEC000CE59E978FF00E0373736DE10FE13E0F98F
-:10BED0001B595A3DC04DCD0CB0BC0191D73714BF92
-:10BEE000B07B8F3A63F01E2D5E92797C8DDA0DABBC
-:10BEF00061BD4A12E747E2C67BE4C26E2116FB86AB
-:10BF000014337F7745CE4BFF03F19FCE54C6B29DCD
-:10BF1000FFE4423FF06AC9ABC0BEA9FDF1E6F76994
-:10BF2000FB3089BEF92DF40F859D91227F9932FA5D
-:10BF3000750AFFF97479D6CF803D46D7536573E310
-:10BF400079E733747FB9546E5429EC5B399F5215ED
-:10BF50001DAF4A2ED83F40D7F51939953C9B7EBF7F
-:10BF600043181CD6BFF2870CF047ABEC8E1346B9D2
-:10BF7000658D7FDC956B8E7F7C4616FEE67C80CBE4
-:10BF8000AC0C84CBE4A7E6651BE32F43F10FBE8F17
-:10BF900025FA354C9E5AE49C906736277B6F84685F
-:10BFA00024E0CDC2381283BB2EE1FB57B345199C68
-:10BFB000145A9EC59124417FBAEFD9FC4B56857324
-:10BFC00040CE405A0FCC47BDBF1CF8B65FA806E074
-:10BFD0003B570AD9D93A222C0F91B414407B9B735A
-:10BFE0004086F945BC02579205E3887959D9C3CBFD
-:10BFF0001D759FAEBC2E303CAE41DC1EB47F15BE1D
-:10C00000BEE35EB76E33C43B92DCD1E398BFCABFD8
-:10C01000D6B8C7EDB2AE43FE7632E94579E9767F10
-:10C02000A40330BCC42B41F9FB52F8E7C017479575
-:10C030006E12A4BF9FFCF9E704DF65831B6245F025
-:10C0400035EB27BF7B3DE645FB43768B5E0A4BC055
-:10C0500047D9F5D6DFCDFACA49FAF1FE90140DE5BD
-:10C060007C9979FA784EA2388EA38AA17EF0466632
-:10C070000F1F4E66FD0F27B37E6F71BDD49CA110BC
-:10C08000CC8BC9723AC19EFFD8730CAE6C823EE96C
-:10C09000027DE274688857A157D6EEBD9900DE9AFA
-:10C0A000F72D4238FC5E62E7A4FA0A09F319C4BB13
-:10C0B0000FF593C8CBB4279991C7FC94A5CF8757A8
-:10C0C00034D172DD4BA4244ADB95CE0DD5C0FB2EB6
-:10C0D000ED2544DD44CBEDAEF08F7E02FB7885BDCF
-:10C0E00037B68EDFABA59858B39B8EBFE3CA31EA53
-:10C0F00016D852F56027E40B0D6E265EC82F194640
-:10C10000BFA7283F507A7804CA74DDEB5687FFE555
-:10C1100036DA3EF725A2621B5E0F3E0AE04FE2745C
-:10C1200001BFCFA5BFAFE37454B45F62E7FC3EF636
-:10C130000E180E0EEF7439D9FFAEDB5F79F934BA01
-:10C14000AEA2BEA948DEE3687BC883824C04D69EBB
-:10C15000D8E2B51F07ED0370AECFF043F2147C3F79
-:10C160008970F937DDC2873363FC80F5A5BCBC8ECE
-:10C17000EB2913DFC038D46FD7CAD9B13FF6F331FA
-:10C18000FE5089F8C3F8790689FD8171AB63F3A08D
-:10C190005C9EC7EB0E2E5F80F9DFD3EDD103C0EFBD
-:10C1A00033F9B7947F81DF9D148E57D85B0EFAE97F
-:10C1B0007ED23710B50D666908B4C37865242403B0
-:10C1C0009CCBBD9BDB617D1736BC9209F475735E19
-:10C1D00011D2DF2CA75AE4A224D25EA1AADE2278D3
-:10C1E0006F4C42B82CAD774620CF6DE9D07B3FE154
-:10C1F000E032CA3F5784257E0F3F1C6C30C46D452A
-:10C20000FEDFB224EA5FC791DF37E731FD2EFAAFD8
-:10C21000E3F75344FDDA3C37CBCFCCBB68461E9ED8
-:10C22000C7B0BC68CAFFB3F3A6C5E40A9D17F356AE
-:10C230009610CD01FB5AC2F957F0FF52ED56B46784
-:10C240009786CC76E9EF25866F7DB98476E215F581
-:10C2500023DBAD0BF3C4B9708117F500117A8AD1D5
-:10C260009590E78B41BF831CAEA5FADC603737DCC5
-:10C270007E2A1DFB65FF60ED97E7C4EEC3ACB3DC1F
-:10C280008769E6F761D6ED6B736401BDF3FB30EBB4
-:10C29000F6BFD369CC0314701A7E1F6610F31F9784
-:10C2A000299103704F68D94D748FB4FDAFF8FD89A3
-:10C2B00067E1FEC494181D79AE7445597E9D867958
-:10C2C0007E05DE1415F252BA6C5330AFA82BD5A3FD
-:10C2D0001AF378B6B4B5D4403B914F24EEBF2C4B43
-:10C2E000706EFCCD3C663F6F97585E97BEDC89F060
-:10C2F000F6CBE488F19EBFBF2884F97433F202388C
-:10C30000CF761E5F80FCD3A9F41BA1661AC317EB7E
-:10C310006F950F74BC0E18AFBA48C53C9AEA3496B4
-:10C320008FE6CF0C95DE3229366EDD7E96BF57172D
-:10C33000FAE410CBC35D5406F04C24D7ADFA8BD28F
-:10C34000DF3D408FC3F556B819E8CF51155A7E1D11
-:10C350001DF7E4CB0AE6DB918D9AE4A0ED7EFC822A
-:10C3600057857B781D95A14535586FC77B8259F558
-:10C37000249A44EBCB5E527A20CFAF91742B304E8F
-:10C38000A3458FDDE47E56013EBD69A72346970491
-:10C39000F213D52210784DBB87C545500E09F964BC
-:10C3A000A56732CE2C874A85DCA5F281E5F73530CA
-:10C3B000BD477E20417CE8A4E798CCFD6B947BD3FD
-:10C3C00084B0B2C8FB69FB9F437B46C0730E9517D0
-:10C3D000E0C749F0FB64EC87652A4F8B21EF742698
-:10C3E00049467A1B6647F0F5950DAD9FD94D424EF3
-:10C3F00056561002EF2358F143E7433A17E77D7092
-:10C40000B402E70833F9FC9FDBB449D120E08B4448
-:10C410006C14CE9D520BEA1D27E481D2EF16298CB5
-:10C4200072F1A7BA2E035C2F242D4B160611EF2FA5
-:10C4300001DE6739FB52000F4715D509F5359030FD
-:10C44000885F33BEE6BBEFB303BCE6E758F1A2DB7F
-:10C4500001BE0B02C3F085F70BB404F8D2845C2153
-:10C4600066B91224A7D8FDE6CD876E03FFF874F6EF
-:10C47000C9F7B2C247E3D1AFB05312E5E59DE4F28C
-:10C4800078B47979271DCCAF984106AEDF2D0DA782
-:10C49000938F0F6E90730CF424E8F4699EA72FFD20
-:10C4A00092E7FD967950FFC5F425A383725E9A0149
-:10C4B000F465A083D9FB5C5199EEB394F79F01F426
-:10C4C0003025A62FA33677402904BCAB5DB23CDCF7
-:10C4D0004ECECA0820FEA7DA34C4FF34EA8171BB0D
-:10C4E000D39D4FF75FE1EC6DB70710FFDF07FFA6A5
-:10C4F000920410FF9516BD53EDAEB3039D543BADB2
-:10C5000078D610FF35DE61BFDBBE0AFECF01FC0B23
-:10C51000BD320AFB94E27F42FE08E78D89F07F413D
-:10C52000BEFB8CF23205FEAD781772608FCB5BEDEF
-:10C5300086787023CB4B9EFAF2B8762867AD0DE271
-:10C540007D993DE9EAAFB0BE85D597F56932BCCF9C
-:10C5500058B49ED6D3F29E60A81ACAEB3648284734
-:10C56000A7BD166E87F2B88DACBE7453CBAFE09DFD
-:10C57000B3753AEBFFF4F14E7CAF22D2C9FB57768C
-:10C580005743795D17EBFF478F5307BFBCFC48A4A7
-:10C590001D7E9FB895AD43D87D7339BDED919EF852
-:10C5A00015F6EB66FD6E38E44C66FE12B3E3E6F07A
-:10C5B0007DCE7D88EDD3F7DEC5B5010AF7EB0675B4
-:10C5C00007CA0D5B5339CAD1047E5AA5D45D00DF7A
-:10C5D000F9544E10C43BA5D34296B7DA43A75893FB
-:10C5E000CFEC2691EF0979E78B0CF85A93CFFC0832
-:10C5F000D12E2B83B0FCE407D9BBB3221F357A3F81
-:10C6000091207E007B44FD9B203F757E510BEAD339
-:10C61000F9E788BCD401FB2A3A6FE9977FBA289ED4
-:10C620005F7E4B3EB3938EF13C7AF17B63246803CB
-:10C63000FF640F100FBE03147D19EC963DF0BE9100
-:10C64000E11D923D4156D6F3F7DFDD459DDC1B6CC5
-:10C650002D761D94C05809DF55B9AC8F44D352874D
-:10C66000AF7FBE9D4459FE045BFFF5ED4ACF1683B4
-:10C670001DBF54888F59E351AFD4713C09B9B194AF
-:10C68000E38BF2F9E67CBAFE65CE16B41B9713A6CF
-:10C69000D76F24118C6FDC68E1F335EE3FBF65B3D3
-:10C6A000411CCDCCCF6BE972D8F9FAE0C3BFA3F03F
-:10C6B0006F7CC0E305FDBFB6D7DCAEF181978F304C
-:10C6C000FBCBCCEF8D82DF23667EA70605E3F7FB6D
-:10C6D000CFC3731B713FD0E51C7C4B27B1FD0EE926
-:10C6E0007D0BFFB9E0BE6031F8353696A7C8CB6246
-:10C6F000DE4FBB995ED6A95EE67E108ADC4FFB2F2B
-:10C70000C17CF852A147B99C11FC5CCAF5FC303DD4
-:10C710005E6BF577EE433E99CA4B56FD2DF4B6B8E5
-:10C720008748C745FD4DF5F5CB1A5D6F9FCD1D01BF
-:10C7300078C7F47604F9688A93CA6B1BE2EF00E0CD
-:10C740006F1AC75B3BD7EB09FD03F7FAB8FE01F59B
-:10C7500037F01C61B85F1035D9FBC3CE3112D8FF5A
-:10C76000437873517B2A05FC7DC2ECE23C32AA3C43
-:10C77000112AB7DFCC1F416F2BCFB0DF0777B8305E
-:10C78000BE20E2EC82FF5E2F6076F8B65CED3D9055
-:10C79000FFFD7CBE7E3E7EFFCDF3F1FCFBCF44C3AC
-:10C7A000F36FC867CA8F937F01E7DF1D8678697FC3
-:10C7B0007AFC38F8275CFE941610FCFEC9AF7D0A9F
-:10C7C000EB3FA6B038FBB164FE4D65E714FF3BD4E8
-:10C7D0009EC98F4CFE15EF911FCB30C7E7453B3FFD
-:10C7E000FFBEDFEA0C7518E2E181FB935A408FF936
-:10C7F0008B785EFC7A46C7279F4ADF617C272E50E4
-:10C8000050595A300DDA694A2EC4679E62FAA2D98D
-:10C810003EA0C0FB3E3E7F38A5C00FF79B88F604C4
-:10C820008C1318509650789FE4E7FE27F97B402739
-:10C830005DEC2BD6152858540AFD4EDE3C80726301
-:10C84000A8BC6800E542A02084F39E5C2AEA79F93E
-:10C850006E5626DCAFACE47C8271E33871E2E171A4
-:10C8600061F37B37EB94F8E7D5A4C0638AF7AED8C1
-:10C87000CFE2902B9DA4339FD65FBD3F1BFD8DC69D
-:10C88000547D02D0C3D78DE39E1CD387FBDA523987
-:10C8900038F6C1323C17C678D1DAFDCFA1FC5B2B4C
-:10C8A000F866AF996F66178CEE3CC51A671F053F97
-:10C8B000CD2F18C10E7A12F4972386875B787E53AA
-:10C8C0008DDC540D71A54F5713BC677BCB0B32D257
-:10C8D000D52D3F92F0DD0961C7ADE5704EB42FB89C
-:10C8E000A71030C815B8A71030F875704FC158861A
-:10C8F0007B0AC6F6704FC1580FF7148CF5704FC104
-:10C90000582E25D7B6439C6E5D17F14602ECDE82A9
-:10C91000B13FDC5B3096E1DE82B13FDC5B30963FBD
-:10C92000250C6E9F3E2463FC1FEE2F18FBDFF0C228
-:10C930008FCBA3B06D17CB536B7751F8031DEA5A19
-:10C94000DF240A9FD51C3E70BFC138EE07A9173DF2
-:10C950000FF859DD77FD42F85EB0EF26D3B8A49BFF
-:10C96000C9E316FA17E0783D09A5813F37850C1E0B
-:10C9700082784773445261DE1B1E30CBEDA1F74C29
-:10C9800022E6DFD71043FC37383CEEBFA5C0E343B7
-:10C99000BACA2379C6784F8C1EDC6A14E0F09AACD0
-:10C9A000C6A38752726E1AC6799E97218641FE48A9
-:10C9B0005AB6CF920CE703167824E598E9C21530F1
-:10C9C000D3454AB1992E3CAA992ED22ACC7491AE65
-:10C9D0009D37227C336BCD74B2466E42BE1770AE6B
-:10C9E000A07F01CE53E0854A802FDD27C48BADF0B8
-:10C9F0006DDCBFAD13ECFE3385EF9316F87E466613
-:10CA000055BB03585DE72C8FD93165CFB7E021B016
-:10CA1000357E2AE028EC081107A5FA1FEDE9985F9A
-:10CA2000CFFC3D6A1F1C2CC0F303E6E7012581DC27
-:10CA3000BC8E84513E5D67B10F6E70DFA7807D3084
-:10CA40006CBFD43283F70BADFB057B8B18E25256DB
-:10CA5000FB40DA2F453D9361BBFB859C0E7F89C669
-:10CA600090268D466EF47AB4FF02B9058EA2B3DC2F
-:10CA700014378E6BF7897508B888F993488B9C0337
-:10CA8000F45C6CB5CFCCFEB5F0C745BC5DC4B585D4
-:10CA90003F2DFC182B9CE57382ED40FF53BDC28FE8
-:10CAA000EEBB0A7E17FEB3D56F1DBA170090857BCB
-:10CAB000373C4E7FA77F9593BDCBC7F84EFCDEE990
-:10CAC0005B9C36523EE61DADE67B30741BDA88F780
-:10CAD0008A00645970EE4420A842B65E7A6800DE8F
-:10CAE000DAD97AD98B83CFD2EF96921F0C6C82BAA7
-:10CAF000535FCA00D7A1783E61F78415DE4F29E85D
-:10CB0000BC19F468B26A27EF1AE8C24935D5BBC52B
-:10CB10007C5ED0133943F5BF319EEBFFA3BE775146
-:10CB2000F8BC3B7E847A456D8C67D759E1259EC35E
-:10CB3000704DBAE838D8272E62D837EA4343598E69
-:10CB4000C10B55AB8CF7A644BD06EF977CDD7D018C
-:10CB5000DEDF7518CBD157DE7718D71F617905F660
-:10CB60001081FC5BC547EB8DFA65880E2943951B48
-:10CB7000F6378A7D01D380FBC9EC1286EFBFD5BEA4
-:10CB80003A2CF88271435967F5FAF4B37C7DD1B33E
-:10CB90001CBF64D1D90D3F6DD1D90D3FFD2C5F5F16
-:10CBA000F42CC72F597C76AF4F5B7C76E3573FCB95
-:10CBB000D7173DCBF14B969CDDF0D3969CDDF0D39F
-:10CBC000CFF2F545CF6EFCEA6807BA2BA204DE97D8
-:10CBD0000874103518A0262BFD19FCF92295609ECB
-:10CBE00006E17E4921F74BB66D6DA90717EA115D85
-:10CBF00009603C88FAF739B47E2261F58F742DC63E
-:10CC0000386BDB980979F05E95BBEBA2E3707F6F20
-:10CC1000A2CEFC71EBBF1BB64833FFFB6B9757648A
-:10CC20009ACAD3FACCEF575CD55864AA5F1E3EDF90
-:10CC3000F2EFE74D35FFBB64A19996F7206E26C64B
-:10CC40007B918524AA427CA5F06E5B159C9BD9C183
-:10CC500067BE90FEB753C17E1AFD6BF45F0AA92729
-:10CC600034347E10E0A698C6775BEACFF41EEAFE65
-:10CC7000B1F1EFA112786432CEBD736B1E26B1DF25
-:10CC800088F13981AF3B37DBD0E5FD6C2BC1771ED6
-:10CC9000AB23011BBE83CEF1763E273DB1EF48ABFF
-:10CCA000F93E7AA14EAA009F451DC406F1B5E04E9B
-:10CCB000A26A04E34248278FE8F1E9E411E2AD8279
-:10CCC00077B91E8910FC77B2045DDCE908E4C1B9CC
-:10CCD000DAF95D8C1E049D04804E52212FC8FAEEB5
-:10CCE00080155F644A94AEF591AD8519C67C54B247
-:10CCF0009BC1DD49FF8E84AFE29D667C0588A1FC67
-:10CD000015F0F5E9D7C497E20B45D37C10CF240189
-:10CD1000C8933A3866820DE011EC52D1FFAFA5CD31
-:10CD200000CEC12EF69E9AC093186F6B2B89CE331E
-:10CD3000F87F4135AA019C6BE44955907FBEA30C56
-:10CD400043C6C3F0B383789321EEBDA3CB968C6F1B
-:10CD500054EFA3782921E4BF372F4B2BA6F53D4193
-:10CD6000920CEF6CF5B4D9F0DDB29EA7A47AF3BBB8
-:10CD7000CAD1245B0EEE23C956815F3BFB6AFC4B94
-:10CD8000ECAC3E2A4379ECC661EF7EC8509F5E6BE7
-:10CD9000F97703892641FBE473581E679A667ECFB4
-:10CDA000C651619607148C7D39E5106FE1F4CEDF32
-:10CDB000498DD490C826BAEE73B8DCB1D251FA1DB1
-:10CDC0008B9198DAC67C03E5594F9B82F077707996
-:10CDD000453632BAD0E95FA0A7740B1D7954331DD4
-:10CDE00039E402CCC3157C25D623E66F1B93956CE2
-:10CDF000C775D9F13D6C87554E58D6E7866020C57A
-:10CE00009DDB4722115AEFD0197F10B91F7F774C55
-:10CE1000272433F815D6F935E553E89CBF8D7CF20D
-:10CE2000F031EF9CC6F6F999CADEB5AEEE60F4EECD
-:10CE3000D9CAE81D6E74B37C2D6D61AEE15C752FAF
-:10CE4000975356B879FAB46AA0E78BE49734C88F41
-:10CE5000B8FB3546FF6D630E3F0FE5AD7733F8073E
-:10CE60005586674A2F6A942EFDEE3BDC98173CB539
-:10CE70008CE20BF0FF92599E4CEB33C3B1C82237C2
-:10CE80008209E06AE5D74470FD96806B39856BD1E5
-:10CE900099C355D1997C4E9FC5DE593C384661FFF8
-:10CEA0003EAFCEE098AEA9287F2F924F45D368BB06
-:10CEB0006D1A9537749DB51A83B7779690E36678A7
-:10CEC0000AF922E05FC8E1EF55BD2FC0BFF3E2D6FB
-:10CED000ED2420017CFF5B033BA27B9A9037830407
-:10CEE000F096A631BA1570EE9ECDE05CA871387749
-:10CEF00071B8494402385BE9D52A9FD3BE269C7796
-:10CF00009DC3E3F159A4FCABC0795B0A7B47D931DF
-:10CF10008EC1D5E11E8C829CED0ADA715F07820A10
-:10CF2000D67795B0FAFB5356E680BEEDF277E60071
-:10CF30005DB605AFCF01F9EECAE1728668EEDCF2AC
-:10CF4000D8BD831A792BBE43DA1950103F9E407C1E
-:10CF5000F995362BECC47926D9898C7078488D07E1
-:10CF6000076799629297F98D66F8A658E0EBFA9AEE
-:10CF7000F2E1B5AF291FEE216CFD778E17EF347407
-:10CF80003B513F55DC8471F34C3ED7E685DF65BFEE
-:10CF900073BD66F8BDB610E489DBAE023C13ADBBD1
-:10CFA000A795F0F75A9CFCFD16F6AECB3678D785E0
-:10CFB00096BF03EFBA2401FDB3775DB6C0BB2EF474
-:10CFC000DB05EFBA9C0BF6B4865FF9D2427C7FF0AA
-:10CFD000B35A82F1F14D297F25F1E055D465D67F12
-:10CFE000413DD9F20E9B59CF65CCCB3395BDB3CC27
-:10CFF000EFB67954F66EDBFF0164680340008000F1
-:10D00000000000001F8B080000000000000BDD7D09
-:10D010000B7854C5D9F09C3D6737BBC966B3B9924C
-:10D0200040124E42081B0861810483829E84406343
-:10D030004D71435151A88D40314248285E1A7FF509
-:10D04000C94282841834A0585A2F2C378BB56AB441
-:10D0500051A922DD2052FAD5964551F152BFF55221
-:10D060002F40258A177C3E5BFF79DF99D93DE76425
-:10D0700013C0E2FFF8FDF1C1C99C993367E6BDBF5B
-:10D08000EFBC332184906FE8BF04CF0412F410FC8E
-:10D0900081BA433D9704EDD1FA23C3EB1C6A3A21D0
-:10D0A0005677A5E139F1F7115F22562D248390546C
-:10D0B000DE365DBED71E2E26644DCDAC24520CFD4F
-:10D0C000B450266D4F80469590D5566F968F3E4F43
-:10D0D000A85954435C84AC6A2124388A90F6163BE4
-:10D0E000962B726CDE601A2177BE2C7BE3E82B3620
-:10D0F000CDA7B969FFDE9C5B09A1CFD7B80919920A
-:10D10000479FBB9711924F88423F20D1BA5233E3D9
-:10D110002352425F98B3849049D1F9ACA9B1788386
-:10D12000A584C4253BBDF07D52ACBC13A66D6EFA40
-:10D13000DF37F4FD6FE0E782681947583BAE13BE56
-:10D14000A3EAEA04BE676C6F7E537A74AFAE7DAC1F
-:10D150009A98F63E2CF61C72CE37322DE579497539
-:10D160004E5A96A71092D5FF7B5FB69047F78E4434
-:10D170008012920E653D01782A7CCCD5C9B3ECC4EF
-:10D180001985B378BECACDE01B27D1CAE4FEE3B649
-:10D19000015CE3A2758510AD1BF0915D1AB3BF2849
-:10D1A0002906082923A4B32578F03D6BF4B9730A46
-:10D1B0007DDFD9BFFF4C55C679CF55552C9D4A9080
-:10D1C000B869BF442F7D5F0717A77666DFA73FA525
-:10D1D0006974BD2E4E37E477920278B5F37A8254A3
-:10D1E00037572D037CF9081941FB956BA4AE987D48
-:10D1F0004F13EF49502AE41D41DF79AC74D3760612
-:10D20000522869BBDDD8AE6620BC705C25FABEF63C
-:10D210008D34F0BCBFAB12F0F8CEC841DA6DDE7AC7
-:10D22000E0A77ECF558B80635F1A859BCCD71B030D
-:10D230008E6DC0DF028EB293C1B14DCADB19A6FC60
-:10D2400066D55C5E8A115291A676035FB6694EE49C
-:10D25000CBB6B4EE5025AD9F28B57861A8C49195A2
-:10D26000C88F6D43F71D5E08709DB9FFC36D08350B
-:10D270002D5425E04BDB133DD5A12A9DBC11F88A26
-:10D28000E7BF778C7D20BC9296A917CF236E4A2AE0
-:10D29000CE21362253BC384656D9EB9C51FCD8E0FF
-:10D2A00017FA3C3E6DC64732E5FB78AF0E8FF0EFC4
-:10D2B0001B564778D0C5DBB26FFDB904449119E91C
-:10D2C0007700E6A3A8BEE8FCC8D9C717C94E43BE7D
-:10D2D000278A3713E4657F7AF733BEE7FD06E60B4E
-:10D2E000D66FBA5C93791585CB9A17987C241E2645
-:10D2F000176C7686CF354463EDD98A97BE41D664E4
-:10D30000AE44F9D1AECE6F07F9F979A685C8123CC3
-:10D310005F6F07F9A198E447BACF62D00743E6C42C
-:10D320001BE4FE9A825928CF069A67569DF1FD614B
-:10D33000F5C6F77396A518EAE23D6BE6452F55A5AD
-:10D3400046EBAB943A3BC8915B33D74B753AFA1E28
-:10D350005254F73AD0ABA8DB3267E27B7139A53182
-:10D36000E7B5CFA3BD0572A25D65F326EED870BE0A
-:10D370008BEBA1BBB91E3AD53A37F2FEBFE6FDEF03
-:10D380006D716319C167C13506BCACCEA2F29A8E2D
-:10D3900007B0D77FFF29B5EE73985F14CF96287C2E
-:10D3A00080698B175B805FC5386D59F90EC0DBFA59
-:10D3B000EAC1E727F4AAE867557CC44BDFB312A3A0
-:10D3C0001CB7A5590CF89890C7E5C6B66B0CDFDD05
-:10D3D0009B3C63631EA5ABF587648274F73BE3FA5D
-:10D3E000FAD3AB711DEB33D9FA07A66FD3BAA944B0
-:10D3F00088D011D6534CF5A1A6FEF9A6F6D1A6F613
-:10D4000009A6FAB9A6FE95A6FA0F4DFD6799EA5747
-:10D4100098FACF37B52F36B52F37D5FF8FB17F2983
-:10D42000C3F3F5E2D920F205F4BAB9BFA268885F68
-:10D43000A1E7237CE536F2E30F722AB43C66671855
-:10D44000F02BE8F374F1B39ACAB810F093A23A50F3
-:10D4500099962F267A7A589F998FFAA38D4E0BF5BD
-:10D4600037B75F52041D5773FB70CE12031DF5E6EC
-:10D47000143AC07E24CE34944BA7A20B89A418DBA7
-:10D48000B5A1D1F67CF8FFD9A58B53D37180EBDD24
-:10D49000C1E72DE4C023C37DD7223E02D49E1E1BCC
-:10D4A00085931AB1A7E9C728DF6D49238138AAEF10
-:10D4B000B6F82D58FF3C937E08EC952AC687237852
-:10D4C0007F42C2128C23E6D3CEE9651DC8295ADEFD
-:10D4D00001728A96B7B56462B97AAD256B218C5713
-:10D4E00063433CA58EBBD5AF4059595E04FAFBB6E9
-:10D4F000B13B340BAD279E94497022B5174AAE2834
-:10D5000087E5244C9F9FB9173EF735FDCE24E04EAA
-:10D510008246C6E62A12B08E2364ED9EAC1F7AE8DE
-:10D52000B86A81E275405BB177859286FDFCE03692
-:10D53000A84ADFFE11B43EBCC082F685B5BCAF057B
-:10D54000EC7731EFB53FA4844B3BE6557B2D7E0A4B
-:10D550008215C3EB7E05701ADE492C1AADAB7E55E1
-:10D5600002B9F6469E8AF276EB1F28438E800FF5AD
-:10D5700065819EFD62AD6D25CC73603C11D952FE74
-:10D58000ED4B310EDA9943F1B906F4AC2A484274F6
-:10D59000951F76C13C9D32AB3F9777CCB7B2385AD6
-:10D5A0007F2CEF987B256DEF9C986B8175E4A5B976
-:10D5B000B4400CBA3A0CF218D6B776D170BD1E340E
-:10D5C000976A0D1D77082D8B7909B4760EC09F9749
-:10D5D0002A7F9EC9EA0738DCD466DE9EC6CAB3FD40
-:10D5E0001DF3F8AFE5B9855D3A94FB8FC5CE8C414C
-:10D5F000EDD3C37965FDED532AE886029D6FB27ABB
-:10D60000875AE8D89BD6DA889FF2D4A61C827EA2DD
-:10D610007F8D2DB01DF84351875EAAB3BB026B32DC
-:10D62000AED0E8FB0189CCD1CBC97B399CEFCA973E
-:10D63000707ED3E5637E99D2EF263F413B6B137139
-:10D640003BC01E89E0DBFFB90FE990E3BB2ABF6A4C
-:10D650001DD02959C8F4667E549EAD50E8389B61B0
-:10D660001C5ADFDC6EC1F96DDA45F9977EEAF39B4F
-:10D67000DFB180DD3C96042DB0BE312480A5872C1F
-:10D68000B30050BAB91EDFC6F9B790F237FA3B20A3
-:10D69000FA68FBA5C3EBBE06BE48222AD655BF1BBF
-:10D6A000E9A9715772652CFBC0966FE17E26A957D8
-:10D6B00026713F87C1D9965FD61FFE56B20CE17E18
-:10D6C00093C767CF07FF6EE7C1E030DAF4C4AB461B
-:10D6D000BA05A8CCD2C99D1CFE9D24AF4F93E93852
-:10D6E0007B72EB92E1FDC6FA4FF665C0D07E3FBE7D
-:10D6F0003F39DF8DFDAE08764F8761C679C395400F
-:10D700000B63AB7BF700C98CD136839B413CE53F73
-:10D71000DF93AAC23CEA86C23885A17005908FB318
-:10D72000FE603003E773BE05E86204CC87D3472D63
-:10D73000D2978A7422F00DF4504BEB573430F850E6
-:10D740008310DB89E236CC7FCB2A4A27CEFE749247
-:10D750009ACFEC236F148EC43AB87FE5CD8F41BFCA
-:10D76000022EB37ABC560817F87EE75E053ED0CC91
-:10D7700040DF5E077DDE9E5B770EACB374A3AF1512
-:10D78000E8CFB92BE4877E024ECE29214DC27EDA46
-:10D79000B9D06FD3CD9595A817BA08FA4B427F9AA6
-:10D7A000F16F9D62B4F708E9C2F58CEC32DAE994C6
-:10D7B0008E519FF7A3E39B23741CAF8F4B08FD137F
-:10D7C000E8B4C47BC0CFA0FE078E35801C7980EB07
-:10D7D0002541D7E27901891D67B8323FE2CF66CA99
-:10D7E00083C3FBCAFC18FEAC0BF86304F2CB7CC00D
-:10D7F000879BF461FBF09B8DFCD2B8F3937DC3E86B
-:10D80000FC9DA5EA04C08FF87E03C737A5E3C54891
-:10D81000C71BFBF6815E1B7E33A3E36BC1D6488F2B
-:10D82000D2E34D1E6D297C47D099793D4BF87ADAC9
-:10D83000737DD7C278576CEC7EDE81EFF9AE473E40
-:10D84000DB180A3A4814BEC3397CE36E89E0D90D6F
-:10D85000F263568DF779D0CF3E8F7B3A9433D5BEA5
-:10D8600036302DE6D6CB06BBCF8C5F4A5FAD485F26
-:10D87000C4374D92C09AEDB6A2FE1C806EA27AD338
-:10D880002FE8FEE653C8ED3B62E1E174C73F99EB38
-:10D89000BB1BDE4FA9F611E4D3D39DD769F61371F4
-:10D8A000B3A81D1BB0EBED5841F71DEDB3D04F16DB
-:10D8B0007810CF57B5CFAACE033A772ADE58FE4F5D
-:10D8C00044DF703ABF9FD3F97A6E7F7571FBEBF638
-:10D8D0001615E57B678B07CB8E162F8F879663B95E
-:10D8E000AA45C37EF29A4F2BD07FBF99605C6B65CF
-:10D8F0004289148BAEF2FC467B7F78B311EFA9D539
-:10D9000046FF3B596F2FD37F49E5F986F644EF6810
-:10D9100043FB69C48B0F00DDDBD22A0DFD48F813F1
-:10D92000837D2BE0385D9E87F1620A4FB4AB853D65
-:10D930002BDA09A9C378AED5E467769AECD80E80C5
-:10D9400023C297C1B10BE088F02DE7F0AC667E13DF
-:10D95000F77BE285DF53B47ECE7C8C8B1094572B03
-:10D96000726CA89F3BF298BDDD8F7E3275F293F208
-:10D97000FCEA354C9F0B7BFCF99C57AAC1AEDD92AB
-:10D98000694139B9256D8F672BD6E3BD4C9FFABB32
-:10D990003C147F560F8F57538ACDA2EB4DE47CB3D6
-:10D9A000DA4A30FEDD91EEF4421C2CD1B3A806FB1E
-:10D9B00099BE4BC8CF89DEFF23EFD51BEC0EA25CCE
-:10D9C00063586764FEA536368E44241827A5D866AA
-:10D9D000C09F9DE8EA79305F5B148F79B05E8E2737
-:10D9E000939D23E214663CB96B8CFA6675117BBF7C
-:10D9F00037E701C4BB19BEAE2A23FD7670BA684B67
-:10DA0000DF827C68EE6F1E9F4C8937F87F1D9EC1B8
-:10DA1000E324C29F16FDC08F76C7E86FF6A3CF86BA
-:10DA2000BFEEC6EF19F55D0C7F7DD2085D3C49C0A5
-:10DA30003B8207115FE47E98885B8BF114C2C6C3FA
-:10DA40003AC6B7FD28FF7E99E0423FB2C0690B801D
-:10DA50002C2CA0F3003A6EFB55426025ADAF4B98DD
-:10DA6000D99744EB05DB6415DB9DBEA11067EEDDA5
-:10DA7000306368987EF71EA9EEA211BA38DCB6E4CE
-:10DA80001B32993DA0BC13F600934BE8E7FAD74D43
-:10DA90000C69608F1711EF76025E306B17F444F457
-:10DAA00075B97FFDB3114CEF66CE25CBBA63E07F2D
-:10DAB0000D6F8FCA715F3CCA6B2EC70B38BCB6772F
-:10DAC000CD8AD7CB71DDF3A4587475B6E4771BC843
-:10DAD000EF51F09D1735D4DBA584CBEF47C8F75144
-:10DAE0007E2FCBAB5B3DA22CC67E9F1246F93D51EB
-:10DAF000D5DA01EFE9E0EF015E7E4AF112631DCF56
-:10DB00008E60F6CDF7152F42AF6EEF7A9CE1A558E7
-:10DB1000E0E57612CBFFFD1EE0E569807B3FBD4A64
-:10DB2000C2B80FFB45B6F60CB43FA56ABB007F1127
-:10DB3000FC5C169B6FFEF91DE3E77EEEB7AEE7F8DF
-:10DB4000E9E2F1F1DB397E3AB9BEEEE0F869E7FAD5
-:10DB5000FA56C04FDC99F3CDF066237E52ABE34D0D
-:10DB6000F830E227A9DC889F44AF113F099ED126F7
-:10DB70007C18F1935EA022FCE2328D78EAC737A7C9
-:10DB8000F057D2609C187672765DA802F6B886CE01
-:10DB9000E9EEB5C220BEAE0A28C57AEF35F9A5A2D6
-:10DBA0004C2F6078CD9C161BEF16DE1EC8D7A40242
-:10DBB0003D9DFC20361FDB79FF63AA1667E87F5185
-:10DBC000ECFE2EDEFFF5E15AA2BE3FFDB94B1EC4AE
-:10DBD0005F30AF3F41D2D20B701DEACE30C5FDB6EB
-:10DBE000156C1F729B43ED86FD7CFF0AA777BB8AED
-:10DBF00023F9ECE01FF171883F09C7CDE59F19EECD
-:10DC0000DCFF15ECFBE52DC81E7A356DCF5B9E79E8
-:10DC1000A48E96A30B46E03CF3EBBD7B00CEB26B2B
-:10DC2000CE50B67F3CCFFDFE184A6AC154E91B7046
-:10DC3000B8DDB1F7ED4529F42995836807D2890449
-:10DC4000B6533A8D5388929802EBD5705D56B06307
-:10DC500065586F17D6E34937964E1262FBD7DC1F23
-:10DC60003DAF200FC7731337FAAB29C48BA5E06310
-:10DC70007B1A51D227E0F86D7113082AFCF3C05FBC
-:10DC800075666FEE009F46A3509884AC82F090EECC
-:10DC9000DA87EB271EA2B278DBCD6ECC4FF8335D6E
-:10DCA000DF98D35FDFE9F6FBD2E12A21498434DB38
-:10DCB00059F98B78D71628BF74E4062068A58DA87B
-:10DCC000FB31E0D55F49D0FEF0BF951068C5C92E85
-:10DCD0003B87F907A73DCEBCB334CECFCED2388D2B
-:10DCE00005E9A71EE736F87532EC63FA9643FFB6EE
-:10DCF000E44968778AD20CD77D1EED06989F627F33
-:10DD000029F7BDD4A8DDE67C5342BBAD4D0A12888D
-:10DD100053FADF96D0BE22C50C4F4E9578F2C64519
-:10DD2000C7717A970D67F12E16EF59F1F75F8C02E4
-:10DD3000FBFB970933C349F4FDAD07A99D0779346F
-:10DD4000D3BCAFD7537A4A4FB579B750FA49E57E7D
-:10DD500072DCDA4907EAE9AF9F8C62FCBDA365BFBC
-:10DD6000BB8D0AA444C57BE104FA9E93EFDF12B990
-:10DD7000260C7663E22445853D8E2239580DF32525
-:10DD80004D16027C714F83713FB7B3B008E122EAB0
-:10DD9000C3F87E2E2955FA227936D48EDF58C0F387
-:10DDA0006A5CC40576A1F26F2D2956DE8328C5FC76
-:10DDB0004AD3A8DE4A82B820E5145A96760631F98D
-:10DDC000A3D21BB4831DBB2140FC360AA707E7FB87
-:10DDD000AE81F13ACB7D0960976F3834EBA2B17414
-:10DDE000DEA1B0E205100447A5E0BA439ABC368133
-:10DDF0003EDFF9A6C50DEBDBCADFEFF449C8FFF73C
-:10DE0000CC23013F85C7D6863D7619ECDE90858C04
-:10DE1000443B973A5C93B82854215ECBF8FE965168
-:10DE2000E9F8B027B43C19E0B22EE1FC9046C7AF48
-:10DE3000AD6671E71972F6F3306EA8D386F849E73C
-:10DE4000F94712A945FB39659ECE5EA6FF123B99A4
-:10DE50005F19BA8E60DE535299D3EBA7DF7B22CCD9
-:10DE6000F68DEEA96671671709E2F767C8BB1C1645
-:10DE7000FABCA75A71033D2599EC73278C4749AE2C
-:10DE800067231BCF359E8D9768CA83B28B79B9E91A
-:10DE9000BC28FEE44405F1ECAE36E64FB94CEF3950
-:10DEA0004DDF7B59E0399B14029E4FF86E98F812B3
-:10DEB000B67AD558F9139D2D2454A5CBB7700E1002
-:10DEC0003FFCB290F909B6ACBD7698D709DF2B6953
-:10DED00010EE7AE15FFBDEBB03CA7FFF574F135D95
-:10DEE000D75FBF3ABCED518063F36D2F221D72BF27
-:10DEF0006A084C81CEE7F95A1BC2B14C63F101525A
-:10DF0000DABBD75A8AEDB8AFB5768F03DB87959326
-:10DF10008083C27398A265FD0CF835247B57A83026
-:10DF200088E6CC9A44D85615ADAFBD92120E950F27
-:10DF3000E9F334D95F0CF190174822C5F7064D522A
-:10DF400059FE9BF43CF0534E95847E58CE219F039E
-:10DF5000E8E1C46C0BE6BFACA8BDF4C29174FCFB55
-:10DF60002A148C375457555C0EEDC30E317A715D0F
-:10DF7000C7F047E114ACA2FC30E2108B279492B0BA
-:10DF80003748DB877989350DF4C73C0A60985F27ED
-:10DF9000C70F8F0F949686FC00D444AF118F6E1379
-:10DFA0001ECD78758DA47804FD52448A985FC7EC25
-:10DFB000C75ADE6743D544F45FEF5189DF3AAE3F7D
-:10DFC000BE5EA4F6A346EDBF10B51FA1FC1BB51F96
-:10DFD000A1ECA1F62394895AC545A574BEA1743A53
-:10DFE0002EF05F4DD94AD81FB86FEAD537FD93960A
-:10DFF000657C9F8D726A4A25FDCE2CE062565FAF2C
-:10E00000519BE4A552D9505F9BA6887D3C3FE8D444
-:10E01000C42C0BDFE79971A746EB9D990ADFD76304
-:10E02000F511C5C450EFA9B118EAE7EDD18D3F0550
-:10E03000F01387F5092377AEF71744DBEF28A475B3
-:10E04000DA7E80DB73B54B2DBE2D31E877D948469B
-:10E05000BFCABF895FA2F8FAAC80A09F2E5B349440
-:10E06000DFA4505141BEF6D7CB540EEAFDEB022A95
-:10E070005775F191C3853CAEEEAB60713612FDF978
-:10E080007A12CFB322F0BC330476C4ADAF5EE90D93
-:10E090009281E5AE355339A2A7938B051D8C2423BD
-:10E0A000D19F27530E54009D754D54801E4A391F31
-:10E0B000106EC761889FD2CF539FDEFD174D053F7D
-:10E0C000ADDDDD3612F37E2E1FA9CB935995BE68C8
-:10E0D00022E83391F7434895FB7DBA2EC97FA90505
-:10E0E000ECB681ED1485BCAF83476FED8C24D00373
-:10E0F0004E2EC7CDFD57B5EC7C05BEBFBAA51B4B58
-:10E10000679A0F858C5DF163FC669FA7AE11E6658B
-:10E11000CFA6ED3A396C4BA3EF19FC806C667709FA
-:10E120003CB809C683C4BEC986CE09F17114189DD6
-:10E13000545F807CDE109A8579159DDE0983C6AF19
-:10E140004EC5275BAB5E2269148E4FBE3AF32FB3E8
-:10E15000697910F88DEAC12738DFE4943FF6DAB523
-:10E16000067E396AE297A3267E397A0A7EB9E04EA6
-:10E1700068EFC9540CF51CE0175D7D6B845F583D5A
-:10E18000CA2F47915FEE79D986F58D238F1AF865EE
-:10E190004521AD67EBF865BAECDB12C30E78E53BC1
-:10E1A000E2975F9F29BFBC7166FCF2C4D9E3973F39
-:10E1B0008E4CFFEEF8C5779AFCE2EBCF2F87605EBE
-:10E1C00067CA2F9DEE20E60376CEB6540762E0FBC9
-:10E1D0007A8E6F11F72EE3718A69F3B4CBC7823D53
-:10E1E000CBF3D6443E4DE73CA6BF57D4CE407DB9D5
-:10E1F000F520D397423F97713CFE8DC731CA424C00
-:10E200006FA6974BF8FE4C4D0AA8F4D74E6A12A49D
-:10E2100082BE9E22912E1596BAAC76A414B59BE8C8
-:10E22000F7D06EBACFCBF266C92166EFD8E97F404E
-:10E230004F17975B0D7A7588D9FE32D5C53EA6D8A3
-:10E24000BFBC0FF212283CBE1EC9ED2693BE15704E
-:10E25000D870A812ED90CFB36D83EE5775F2F546E6
-:10E26000ECA9525F45AC78587DA184F0BEC9A3C526
-:10E270001796813EBE0AF5AED0E766BDDC53F59237
-:10E2800051CEF8C7A75616EBE48C7F3CEACD889CAC
-:10E29000E1F501E50C3907E546442FF37A442FF305
-:10E2A0007A442FF37A44CEC0F8D951BD3CF281F1C3
-:10E2B00077FA757A7B19D4B34FAD9717707970B62A
-:10E2C000E5CC1FB8BDFA5DE9E5CA424E2FFFB99C07
-:10E2D000A929FC0EE54C2DC899A453CB995A90332B
-:10E2E000C506397355E1B7D0CB890DBD7ED8BFBF08
-:10E2F0006200BA77707C371568D7C0F8A4E6F4F2EC
-:10E30000B6CD74D55BFBC0AA0CA0172FF3F3067A29
-:10E310003FB1F9F7AFB4E9F2A21395103B5FD1FC1E
-:10E32000243E9FDB7010E365A79A6F7D21C1D2ACBC
-:10E33000477B6BF7D9916EBD16DC13FFB6F3E89CF3
-:10E34000CDF8F28DED4FAF073EBA8FC7FDCC76AE5C
-:10E35000C0EBE9DA3FE6EF5E3F52C571CDDF3F1516
-:10E36000DD523ADD0C747A22FBBA31E0E7C98977D5
-:10E370002500BCBE07FAF0C96F43A7AF8C64F83C18
-:10E380008D750761FCEF6ADDFF017FBEFC6DD6BDB8
-:10E39000A090D1D569ACFBBFBF4B7CFF07FEC26725
-:10E3A000DF66DDCB04BE093B2FE3865F289FACFF11
-:10E3B00057E1DB10BF58FFEFD18FC13ABBBEB26F40
-:10E3C00086F805F9FA1BD9AD3F3F45D8B99944FE07
-:10E3D0005EA28F9D877157EBCE4791E879295C0F3C
-:10E3E000C63722ED07629D97FBAE4BB047DEB10EFC
-:10E3F000D26E63713BF3F3FF2E90D83936A9D60164
-:10E4000079F1BDB3F760BE41E7EC09B86F65B6536B
-:10E41000C47B3D2D1AC6933A5B7C58DEDE521D82CA
-:10E42000B8C9932FBD25413E58E94B0DA8DFD64E04
-:10E43000FAE130CCE39B5A1A0FF5DB4D768A8BDB81
-:10E4400029DE51AFDFA9F75F9EFC4D13CA4111874A
-:10E45000BA2362BFD0F7549D9F44EB400E113F0991
-:10E46000EA063F69D97AB05F7AC07EA1FDA78E5ACD
-:10E47000B63ED677D65A483DD82F6B1B2CD5B1EC7B
-:10E480009770416CFB85D671DFCD91680FACCC03E2
-:10E490007B86D4E9E36AA7B25F1E1EF5DDFA495711
-:10E4A0008C3A3B7E52846FB9DD32A4485B0821D997
-:10E4B000B32527869DA69C18D65F4EDC38EA5BF80C
-:10E4C00049E102965F2DE86BABEAC578726735C10A
-:10E4D000F8636768656A09AD3FD1602112AD5FFFDF
-:10E4E000328B0B6F2827013847BB219B603DE465C9
-:10E4F00074304376FE08E2E03D55D47F52216EF73A
-:10E50000E35A80EDBA8499B73928BDD4962B04FC20
-:10E51000A619F214FC4E4863F9A1B54EF2A338F0E7
-:10E52000ABA62A64E519C4AD13E562897224E54FF0
-:10E530003519F876A078B439FE4CE417BC802F73F7
-:10E540001CFA4CE3CFDB055D7DFBF833F2DF970F60
-:10E5500034CD8278EEA9E871C12815F599594F9903
-:10E56000F958D0D340F4E7043B69A2AECECFE186A0
-:10E57000F93EB513ECA48951BAE8AD9D94142BFF74
-:10E580004A9409CD7F78457F1E2F41E9C6F1129A42
-:10E5900077E1F3BB206F00D6A778519E3E5849E53E
-:10E5A000708CF9ED6E597608E4E7AE96662C2F5024
-:10E5B000FAE414DAFFE916FF2180DBCE96762C9F71
-:10E5C0006CE9C2F69E968D58DED112C0726DCB0EEC
-:10E5D0002C6F6BE9C6F2C17CF69D294A10C7B9E0E1
-:10E5E000241D5F474753FBE87774F83EEF43BFA114
-:10E5F0007D72B8DDD07ECEE12E43BD2CB4D1D0DF0C
-:10E600003D2560686F2AA83B067CE92ADD6178EE2B
-:10E610002CEE36BC77BA7EC1D9EE976B7F04B6C9B3
-:10E6200049329CBBA0AFC8706E88F2F190662A5E3A
-:10E6300069FDFE441EE7E866FBE49924F283740951
-:10E64000A964601FF426B23CC8D62CF67EEB8DACD4
-:10E650007E7F0EDB3F12799AB23D42D744CA88EEE4
-:10E66000E7DF9FC8CF2915B0BCC8DCE200442448CE
-:10E670002E24A8C17E4829DB2713FBDEAD3CEE70BB
-:10E68000BF95EC94A83DD9AAB0F9B76A24B082F638
-:10E690006B2D66F57BAA48C002F3D7A814CFD0ED46
-:10E6A0007337EFFB4A2A89EE9793D11AEED7C87CCD
-:10E6B0009F3DB2EFED7897E0BE3E87D7CA848F3199
-:10E6C0008F36B9B94F02FE1AD2DCD70BF3BBFF1657
-:10E6D0009B1ACB1FEABDE58B2CE09B4D377E910545
-:10E6E000CCBE29923FD3E7D0E7CFE472B86C6ACEB4
-:10E6F000C7FC854DF52E2F87B3C5D48EF90C9FD757
-:10E70000F3FB0988827ED1307714AE01913F22431A
-:10E71000DE1D5DFF88E8F9D3FF34BF6653F37296C0
-:10E720005F934D787ECD4CF427051E364139AEFF00
-:10E73000B9DEEF3ABFE6947935A63C0703FD42DD2A
-:10E740006FA66F15F112C7E95BBA99E5456499E8C0
-:10E7500046E45D08BA14F919225F43E46FD8785E85
-:10E7600007FD2CCF6B8E4D5FB63DC403E7DE644BD7
-:10E77000BC774BDEA9F3089A3DF95C392C1BC7C660
-:10E7800065F903FF334AFB85A72C3A6E9E47BB51C0
-:10E790005F17E556F875321DC21BAE027BB5A85C4B
-:10E7A0006B85F37C29A504CFE994964B58161D621E
-:10E7B000F5DB3C327EAFCDC3E24DA27EB1A63D0774
-:10E7C000EF2799DEBB38F29E15FBFDDE63E1A5C2A3
-:10E7D000E6CDF3906772FA5E3D5966F9D155129312
-:10E7E0001BB0A13A89EB430ABF8B89FB92025DDC27
-:10E7F000F5C71C5BB7B7B0FC3E910FFDB79765CC72
-:10E80000877696FBA6C1D9B3B2502808FBEBA5DBEF
-:10E81000883B4585F98535E0C7153977EF817C88D8
-:10E82000272E647BB6171F62F6C28FCBAFC6FB469E
-:10E830005C5FCB188F754F49F406E0433556A6FF51
-:10E84000453E74B9D15EA835D90B179FE2FE8F14EF
-:10E85000D2E7073DF988C7148FE5F7800C24BFA3E2
-:10E86000F78030F950CAC77496BB1D10BF2E3A64AA
-:10E87000C1E39EF2364DC6F3B19D2CCFE389906F74
-:10E88000D0F3A82F723886B89CF81BCF93ECE172B6
-:10E89000E2752E270E839CA0E52B3C4FF210CF9300
-:10E8A000349F97D8D152FD92DEDE319745927F1684
-:10E8B000E6416D56089EBF1BE0BE8FA2001DC790AB
-:10E8C000C7B802E9676FF2DD15401CEB350BDA952E
-:10E8D0005D5348562CFFAEEBC2CA41F30F3B5BE6DB
-:10E8E000BCD43688DFE8B4517F26D6FB1E71AEABB0
-:10E8F0000BCF5BA4955B08E45565D9FBD8FE43AF0D
-:10E9000003E97988D78EFBFB649E93BCABCB53B9EC
-:10E91000DDD7350BE6FFE03605CFE7887113BD7410
-:10E920003E3A3A499BB22713E6DF39359809F64C4F
-:10E93000D7F87D1B0B205FE4A04C800CCCF3B21603
-:10E94000717F96AF2B4DD1A45879EA03ADEB038FBD
-:10E9500064B867C20CFF01ED0EC80818FCBC95B383
-:10E960002846FEE269CC13EDDB6F765C3B1BCF4D96
-:10E970009EE6FD17099C0EB3161207FADD408F8341
-:10E98000E0D9650D21DED62EB454C73A5F5B54C47E
-:10E99000F0BDB6F453B48B4971EC7924959BE9959D
-:10E9A000CDE70E858E4FDFEB2A8D3DFEE51C6F9483
-:10E9B000AE5F0379D5556D41BB22092E62C0FC1CA8
-:10E9C0006A074948EF28973E2BB5313BC1242FFAFF
-:10E9D0007DBF54474FF9FDE5D0F9454E437CFF44D8
-:10E9E000F6ECA4600C3C8B52C051C8A1FE70247898
-:10E9F000FEB58BC39114C7E6EB28BE56887855DD6B
-:10EA000029CEEBCD2E2A8B714E6C003C98E9E18E1D
-:10EA1000853E5C1779EE35A282BE2CA5FCA88B43FF
-:10EA20000C043F33BC167EC7F032B7FFA888C74737
-:10EA30004E739DA7DD8FDA456E9D5D0C87A2155A3A
-:10EA40009FCAEB3FF64BE17BA85C9576FD09ED9EF6
-:10EA5000A9BCFC3194543FEE9282EFBE415F9E22EE
-:10EA6000A93980B4594F8F820819B9555A66B07FB9
-:10EA70003A24EFE167302ED4970AFDA6933A852118
-:10EA80003980EBFA93146E05857529D15641D94822
-:10EA9000BA6CF05E63CF9F0EC3771A7B1C4119825C
-:10EAA000933BADC7F471A36BF4E747F2E0168D6EAC
-:10EAB0005B1E9DCF921DC67DD20612C2F196761BBB
-:10EAC0009F9BCF8F4832050C5C4E10C97F9D82F909
-:10EAD000BDC4C1DAE3478BF3E87D85FAFBCCEA39A4
-:10EAE000BCEAEDCE20DC2F4402C6798A7B739EA758
-:10EAF00072CC3E01CFC33C0C74FC91DBEEB7507B73
-:10EB00003923A5AE11E07115516DAC647683589729
-:10EB1000B887668173B60DE0BBA0DDBC0ECD06F3F1
-:10EB2000F959D7E0EB1378FF4711C175DC5EA46299
-:10EB3000B934BE66BF06CDA5A15CFD7D104D5C3F1E
-:10EB40009065A906FE7D51D023D1E4D3597F7FB8CB
-:10EB500016609C4CC075603A35C6C976C121D77421
-:10EB600084DFCB7AF811A5AE04C615EBF96759E836
-:10EB70008120ECAB26B27BA0DE4DA97B03FAE71C1B
-:10EB80000EBF2FD1A913A75A08EBFC78E747AFC8EF
-:10EB9000F9D1F51112BE1BF2A3EB77CAEE0E58CFD6
-:10EBA000CEE70E03BD0FB42E911F4BE901E146E7FE
-:10EBB000F521E837F3BC8EDE407E0A76C974B9D8F9
-:10EBC00010477986C3F19E62DFC7F05EE94BD92E0C
-:10EBD000BC7F27BF7BDF503A8FBEEB25CCAB4D937C
-:10EBE0004915C04FE4237CEA54D0CF4E4BF0CB2ED6
-:10EBF0005AEFBB8A78B7C034BCCBBC402A724EB146
-:10EC0000B783D24DC6F5B20FE4C9DFAF5B90BC80CD
-:10EC10009619890B9347D0F28238E277D0F13224EB
-:10EC20008BAF1B8350F3932FA1F3FC491C9D27ADA1
-:10EC3000E7DD90101C41F9ED8F3662077A4D4BA845
-:10EC40005B371DBE932CE37C8E503B51A172ACE22E
-:10EC5000F2CF26DAE9F7867EED9C00F3C96A9E467C
-:10EC6000DEA5A03C5CC4F8E4E8C35F4E8473E0F228
-:10EC7000374E2F9E33E7F4973682C1C38CEFDD1CED
-:10EC80001E6FC6337FA731DD762BC4DB3FE6FE0F58
-:10EC9000D13CE82F5CC7FD8537E3991FF466A18856
-:10ECA0002F05D3F5F66DA3434BBA0C9C076A274199
-:10ECB000BEF3676E2D2919FA111FF2ED75DC6FFE98
-:10ECC00098906AA0F3EBD64C1B9242DF4F6F6570B1
-:10ECD00030CF6FEC68A69F1B4E5282D6C5CF1A94D8
-:10ECE000A00DE477C3499BE1F9DFA91DEDD79D573E
-:10ECF000FFC98787A6C3FCAE24E155D0FFCAEB123B
-:10ED000058E09EF36B0F9FC74070694C568842E1F4
-:10ED1000D12811DF60FD9EF9B71C13BEB34733FB4A
-:10ED2000257D5AECF55DC4D7376D75CD2F81CE1A90
-:10ED30004356B4E5AFFB43C590C1ECE7C693E791FA
-:10ED4000802EFED7A884111E8D27CFC7E7D3561F6C
-:10ED5000B301DDC3382A7D7E9D431B02F1DA81E0D9
-:10ED6000BC9BDB418D2793893F55FF9CF17774FC59
-:10ED7000346CFF2D87DB6FF75BAA63E577358F6611
-:10ED800070199DAEF8201F684C90689B637C57F407
-:10ED9000CB4831EE5F98E7D55319BE12E67D4E158C
-:10EDA000D1627D6F3187A3986F4F4A78910FE9B395
-:10EDB000AF10EE9988D4DD7DB9FA7B24B672FCF5EC
-:10EDC000FC309C0BE37F7C61EC733B02CF9394653A
-:10EDD000682FBF9052F734C8B77997D10AA58F2111
-:10EDE000F38216763EC53F28BEA370964960E26066
-:10EDF00070B661BB18EFA317393F523F1CF2D4AF76
-:10EE0000E2F2FFAA6D4B30EF49C8A98F36CA28A796
-:10EE10003E42DD42CB8084F6EBFC3A0A6B2A571661
-:10EE20006D9FB60FD4C15599D4064D61CF6F86B290
-:10EE3000CD6A88F78BEF2D38CCECB7859D463D57D2
-:10EE40004F3A3F01FBE0A317993CA0FC6D0379BC4E
-:10EE5000E82EE338F5DB2EFA00E6576FF2CB33B835
-:10EE60007E36DB799B47F3F8FE2432E94CFCF24610
-:10EE7000A2ED188D7AC127C33CCA14E33D5BA24CB6
-:10EE80002F61F05FBEFD84CDA50E3CEE112A470A2E
-:10EE9000E8B8C7A83F0EE51F476BBF1F4DF170FCD8
-:10EEA0002083CB81D1754FC1F78E1F64EBFFB4E196
-:10EEB000D345704F0C99C3EC8638387C407F8D9BCE
-:10EEC0006B0FB4D2F5AEA662CA01E782E2983D228A
-:10EED000EC3059BE5676D1F6C9FF58980CEB4C7BF6
-:10EEE000E807D5305EFA43091AC0ADA3421B0FF202
-:10EEF000BEA3D6E985F32A9B291996D3F7ED741C96
-:10EF0000D02781DF4EDE03DB9105DDEB2AE1DE1742
-:10EF1000F7AEDEE030BAAE760BBB27A3FD7CE26D28
-:10EF200025D1EF35EDAA7D0CE6953B9BEA0709CE8E
-:10EF3000D16BE3DDBAF109B7AF1A394E8E3F3BEA28
-:10EF40008EF3E05CC27E19CDC74F1BF2D1AF1F4DCF
-:10EF5000183D89FC7BF836D891027EC7A8BE22BA3C
-:10EF60003CB5D1DD52D04AD7B5B4E731BC8FA361EF
-:10EF70006530632EE8DB0715A647F9FCD2FE9855ED
-:10EF8000A9BAA2FA77AEE4463B52D8C99713F15317
-:10EF90008CF1C2399C0F2EE7F6F1DC0406E7F9C4C8
-:10EFA0009B0BEF5D61272E0B85D9DC69DD65CB40BE
-:10EFB000EF2EB126837D036B898577519AED20C1B1
-:10EFC000878D0F24FA21EEFAB1D45708831CB13291
-:10EFD0003EEB7B362EB025AFFF38D631CCAF6F2C51
-:10EFE000E4765D01D1E0FC40E3EE51781E2C2E9ECC
-:10EFF000E27102CA3F3BE0F579D0FF74DDD73CE314
-:10F0000008E2B930715F999BF813E9779A760FD9C6
-:10F01000027646DA086DFC723ADEC7D6702ECA0B4D
-:10F020002ADF24AA5B73C7ACB944A17CD53894DA33
-:10F030005DB47ED14377B37A7E789185D6AF7DE893
-:10F04000D14B144A9F8DA3C3EF43FD96879E66F56F
-:10F0500009E14532AD6F7C683FEB0F7BD894B0B6C9
-:10F060003F74E012F0FF8F2433FB8178C35702FD19
-:10F07000343E3DCAD2A15BEFBA314C3E1E71B07E28
-:10F0800047F2C84F6701BC3DE1C259BA7DB9EBC731
-:10F09000083B96D971629DE23D92197BFCB1639861
-:10F0A0001EBD661AEB7741026977B0F3757EB0C773
-:10F0B000F6EE1A8570491993C2E145C7298D8E2352
-:10F0C000E028C613DF5D0C7A1DE4BE95CA7D9D9CC9
-:10F0D0003997E38D7EA70DBF53AC8D877BAC1A6744
-:10F0E000658F07BC517C291C5F8A1D2F57DBCCE63E
-:10F0F00047C74D2E413D3311E2CA7BBFA6FDF3A2A7
-:10F10000F336D3C78C314C1E5DD3CACEF7F7258FAB
-:10F11000403ABA2081D98BA494C28FCAB38D1C6E99
-:10F12000EBC624333F32828721128EDFCAE197CDAE
-:10F13000FA9FE97AE7F0799CEDF5EAF0A4417C6565
-:10F14000EFCE22C4D3C6081DAC338C736485E9BDF1
-:10F1500072CA78308F9411F8DE6A07B1E373B22572
-:10F16000F25E1E7DEF82697D13811F96727B98F897
-:10F17000CFC7BC86062E2D96B6876C10975EDACD6B
-:10F18000E2E4A480AE0FE863564D295F9F9BAFCFAA
-:10F19000CDD61730D02739D4973B3BB13FDD46E081
-:10F1A0001E19AF78021FCFC0CFB1C603BE18081F0B
-:10F1B0001D671B1F629E267846E06C9A9F8027F091
-:10F1C00031BE576CE42731CF5BC644E2B1467ECEF8
-:10F1D000FB96DFAB60EF2DBD91E211EC1FD548CF60
-:10F1E0004B7BF22CF38BA3EFB577AFF0819C4F9064
-:10F1F000541607EFA9F583FE6BDA558171AAA54F66
-:10F200003DFCA49FBEBFF8D10D2E48AEFA48E9CA16
-:10F21000003BB861FB2A17DC33F7A1E27781FCFCE5
-:10F220002820C7CC5B7F9BCB01617735727D73E46F
-:10F23000B7B7CD04787CB1DD8AE70C9B76C405E3D3
-:10F24000306E720DDA63B4FE36ABAFFE04FCD8A6A6
-:10F250009D46FB69F16F3664A8484FFE6116DC04D9
-:10F260000B0E83CDB0C66D56DC4F693C247BE9673D
-:10F270004813E9BB15E6677E1FE67192E2BDA95B04
-:10F28000BE0AF2FBCCED5492A03DD6D4731BDA69D2
-:10F290004D3D177E00764593299FA27E003BECC52D
-:10F2A00031DC0EE3F7A40BF890403ADA37AD0FFEED
-:10F2B000B2E46D3AAF63DBFEE2928AF57A7325E23F
-:10F2C000E9D3EE059B9E5607D6AF1F837D10A77F1F
-:10F2D0008FE157DD29B18DA15DAC6CB0065D101FCB
-:10F2E00068D86CF5520D4C1A1EDEFAC0AFC1BF7C57
-:10F2F0002DCE0BA9A64B1E7EFE9573697DC963D6E4
-:10F30000B41A367D27EC730B3C41CE06D829022F68
-:10F310008B7FFFBC0DE290F01CEC5E819F258FF58A
-:10F32000DAE09C9F198ED3BA7B6D980F6BC653F7AA
-:10F33000DB33C004697DF04B1BD0F747BB25BCF71E
-:10F34000DEFC7EFDE6E75D40870027F04305BE2238
-:10F35000F8EB87B7E0CCA74BB11FC6434E85BFC7BC
-:10F3600001476548E78F3C0D7194D7E3BC0087FAED
-:10F3700047AE75C17A3E5096317ABF6F5506DC971D
-:10F38000576FF567B8B164CFEBEFBF1EE9F0EA83C2
-:10F39000D767B07B24B42C768FA63F0BD6F9B37B0E
-:10F3A0002FC1752E22754887F5F7B1F8C6E70AA96F
-:10F3B0007E2C06BFCC2D66FCF2C19638480E221F6B
-:10F3C000C03E02EC9BBC28E3B9FB7EF72291E558D6
-:10F3D000FF9CC717C61547EEEDB3837DD7C47B35B9
-:10F3E0006D5B1D023C1DC9D186403C9FC2C1CFE16F
-:10F3F00026C1BDEFF2C1E943189E880AFB21F81E21
-:10F40000B5C7A7C173E81FB26A8E12C37BFC7E1B0F
-:10F41000F67D11DFA0F38E87FDF40F32585E9E79E2
-:10F420007D1DC5421E9010D1D3D940FCBF6D0DD2B9
-:10F43000D7678718FF34066AABB13D640D0E81F6BD
-:10F4400040EF6C09E5439C61FF3C421FDBAC9CBF75
-:10F450008DED749E8AA487EF6E09EFD314F4B2E8A1
-:10F46000AE38C37E7D947E8CF745097E157ED6D559
-:10F470005C1E98D76D960F97169BFE8EC2BDE9A7AE
-:10F4800015FF6EB0061EF835F033E55FBF0AFC6C61
-:10F49000C5F8C0D1DF3DF7CA1594EE8F760B3E3626
-:10F4A000CA5B331FD73F5E4662F1F151A797C4E4B0
-:10F4B00063FA3C261F3BD9B9E9FF57F2F6EA01E4AB
-:10F4C000ADBFD8286F3F27C549E711D0334BF0BEF9
-:10F4D00057337C85DF6B96A399C56A4C394A7F0EFA
-:10F4E000111D3C051C057D2E7E68297E2742C782A2
-:10F4F0004E051D47E8D4BC6E233CCDED5530775DFD
-:10F50000FE837525F563C0CE7D560E6CA1533B4E30
-:10F51000E7722B85FFF1DFE561BED12AEE071C778C
-:10F52000F7B9207F6C15F73BFA202E99147DDEE7A2
-:10F5300060F6D2715F9F2B596737BDBD4B76819DB9
-:10F54000170E90EA58F1242AB1711E6132503BDB4C
-:10F55000173BCEE3A1C779BC73BAECCC6D8638708B
-:10F5600017BBD77FE18ACB5CB02F707CD7883B80FC
-:10F57000FF7EF66799DDEBE9D714C89358C0404089
-:10F580003E24FEBBA7D0752ED8B504F31BCC7194D6
-:10F5900045CE6DB8BFF039B9194B73FC6431C4590D
-:10F5A00080DEEF353DDF7511D2D762137DD5017D49
-:10F5B00065F5A7AF1704BF8E27E3F5E7CF9673B9BC
-:10F5C000375D2EBE03EC99E3D4CFC75C02B9F800D7
-:10F5D000E8DDCFC1EF07C6F0A723DD2EA9FBD0C61B
-:10F5E000EF71467A177468F6F7CDE5B127FE3EE96C
-:10F5F00026DAA5E1C9374AEEA1E5B1275F2B7C06E3
-:10F60000EA4FBD9AFB06E9DF7FDAEEAFD0BF39BE25
-:10F610003B0EE7737CF79F726F82FAD37198877500
-:10F620007C651CE645F9772706E03CDFF11C16B740
-:10F630006B7DF6CB12CCBF206D88C793C536668F25
-:10F64000ECFA9FB7207FFAD35D712AC4299A7627F6
-:10F65000A0DFDEF4B403F35E8E3FFBE5247D9CE97E
-:10F660003F5D4FA38DC5338F2792398F033D2733DD
-:10F67000FFAEE999C95B215F6E694FAF0DF607A632
-:10F68000FDF15F2520978E3FCEEC0FEACFDF0F37DD
-:10F690001DCA639BEEB652787F0C3622F5C3378DB8
-:10F6A000EDBE14FCF0FE706170384EE100EBA2700C
-:10F6B000A907793A103C868EB521FD7FFFE0F1095C
-:10F6C000FA170DBBCE413E8AC245D2D8F3C4805D45
-:10F6D000C2F5B3E7BBBF2C017BEA68F70AB40B4E57
-:10F6E000B5EEC963BFAF74F06DD72D054F67DD73FD
-:10F6F000BEB7F866F4FF16D757663EE84FE74FDD12
-:10F7000080F54712BD38DFD3E4FFE6FFDFF0FEB837
-:10F7100084FBF2A7C2FB2FFFD7E2FDCF1CEF896E5F
-:10F72000C82F3BFEECBF72896EFDA75AF793FF4BC3
-:10F73000D71DB18F649F1DAEB8EF24C1109C5F5FD1
-:10F7400035809DF2EE5849E4EFA01F22F277E4B431
-:10F75000C56867C8691D6837AC22EC1E64BF6AE1E2
-:10F76000F7B1B1BCEFF66C6F00E3A28AAF7E33ADA8
-:10F770005B8737783B7004A37F2667D454439CA5EE
-:10F7800075059D171DA735DDE26E55E19A764B3064
-:10F79000AE04CBB7A15C9DF1C3FDF05DC569BCAF04
-:10F7A000D669F237E20B6CC6BC62B2C70DFBD50E50
-:10F7B000AF0277B95353D678BF6DEF58B6AF1D4F30
-:10F7C0000298B779A6704A2D191C4E66F808B8F54C
-:10F7D0008313F747C57DFC4A5A4708F85021D49F48
-:10F7E00064EB413F14FE8E14ECD7589316793BD846
-:10F7F0007E8A1AB9C71FF220B8BF19B96756B5A0DB
-:10F800005F2AE0AC1B0FD76F86F399C257E0C54162
-:10F8100066219E1DD94E6F80CE7F95CAE0BE8AC2FA
-:10F820001DEE1717F0157033E3E17DA0519D1D1FEC
-:10F830002D8DF93AFE4AE2817D96E9F294B01FECF3
-:10F84000E5F204B4978F49242851FFED5845462529
-:10F85000F815C7726C0A9453FBE89A74F3BDE0A4E0
-:10F860003DF237F4A05E41920DF5633985F8FE3420
-:10F870007B96E1BD0390B74DFDF66359E576DC0F4D
-:10F8800075E719DE9B99E0DA02ED07208F1BBF3F79
-:10F8900003FD9B1F641619C699F9CEB17BAFA2E593
-:10F8A0004EEE57F74DB5623CFED89FE755021C2F30
-:10F8B00054C71BFA1F24EE74202ABABE2A58DF450B
-:10F8C0009EC986EF36BCBDA710E2103FF256189EC7
-:10F8D0005F5C7EA1611C9F3D1C04F2AED56A0DCF1A
-:10F8E0001B9ABF204A2A21E7357F4D9489D47C0F8B
-:10F8F000761BC699B87FA7A1BF37E49E0626E3848E
-:10F90000C3DEE7A014F9ECB654BBDF42CBB16F57AE
-:10F91000CAB0EF59F65E5D2B84A1CF3B463C400751
-:10F92000E79078DC0F1C28EFFD4B4BA00ED6F90BAF
-:10F9300039E081327ED8A21258D747999D326C4B5C
-:10F94000DF23D55D5E0276D6678156A85FF075B776
-:10F950000CFE64EB0E19CFD74D976B12FE0AF2B86E
-:10F960005BC21CFF06A705E3F04753BA4BAED5D1E7
-:10F970009DC8DB31F371D1C48A25307E5BA6D6D514
-:10F980000BF2B4F2EF57CA31CEBB12B7F15EBAA296
-:10F9900089BEDB619F5EE425C54F935972FB0FACB6
-:10F9A000182FB9D5E27570A1807AD73DC3BA19F87E
-:10F9B000DD3A8EC98DF8BF1015E241F1A975329C70
-:10F9C000B323774898D722BEB7A09CE5DBDF5E2241
-:10F9D000EE3771A7FF642CBC9FC8F205209606EF96
-:10F9E000D558D04E711DF6EE83FBC8EEF41C728321
-:10F9F00078E8A979C70FFB223D874353258A9721D1
-:10FA00009D15270A587F02F1CD1E4F55C258D46F5D
-:10FA1000E59887B39CE7CFF44EFD8D07F4C7F2A2BB
-:10FA2000D14306CB2F779D9488AACB33B08E5371E8
-:10FA30005E2E258CE7C55C27156C27E1F1CC1FE411
-:10FA4000E3BBE6A9AF5E0BF3D86FC57C67A2684B3A
-:10FA5000601D1DA3DF543B701D84FF5D9130FEDDF2
-:10FA60003CC84FC20BD19470E64F629CC33BB2A31B
-:10FA70002C19FCF2D40A2F9E1B4C7D588E9C9B05A2
-:10FA800038DC0EFFC373B597BE5A45C7DD01B2928D
-:10FA9000B50709A5EF0E9B68A7A2C6C3EF3DC4F644
-:10FAA0004B2F831843BC6CEC3F2E3FD25FB36746AD
-:10FAB000C7FF43C9A5AFB6C584671CEAEB8E1956CC
-:10FAC000CC9F38355C134E01571783EBD7542B640A
-:10FAD00044E38BEF496A2ED0DB9D705C80FAD1BF86
-:10FAE0004CAE0B96A4C3FC8363E1F97C9736642A81
-:10FAF000A5BF1E9B967B23C6491C98FF55FBF3A30D
-:10FB00001BE1C8986BE6114F1BD08DA2254C8038A5
-:10FB100095FB0B940B22CF2D0A474ACFF49BB75B82
-:10FB2000A2759013AE285C35B82BB84307673BAD80
-:10FB3000D772B8FECF23F597B5017E17DA912EAEB6
-:10FB4000E53CD5964CBA20CFEE84FB814B811E4E0E
-:10FB5000ECB062326B0F34821EF5D8D9DFF5490B59
-:10FB600067C2DF71197BD082F1BD37297D68401FE4
-:10FB7000C1F1087731DE8929AFA6C0F98913694A36
-:10FB80000AC06771D88670FB894282707F6A4FDA3B
-:10FB9000C26915C81F2AB677F371264FD4FE518269
-:10FBA0007A9D9FFFD5CE95E1BED481F065DECF87EB
-:10FBB000F8F0B92903D3415B851DEF1F6A2A5F5115
-:10FBC0000C7A62797221E663355549A8879B9A3F82
-:10FBD00043B88BF1959332517579533D104D4CD705
-:10FBE000DD237FD286ED0DCD27509ED3E9E401DFE2
-:10FBF0001CE3FB9D5D56F2D35A5A36FC5BFE69ADA1
-:10FC000013F72DDB419F34903DB6E53A7948BA3F72
-:10FC100089C8FF71147777D6BC180F72B656725F19
-:10FC200002970ECCEADE7B19ECE7D73ADC97C0FEF0
-:10FC30007F8EF71156CF715F02FBFD631F4D9A0354
-:10FC4000FBFBB559EE0DF09741AFF016CDC1F63C78
-:10FC5000F7CB509F316E06AB27323A4879347F8E0E
-:10FC60001FF5B913E1F2697B4260B07B48AE6E7E4E
-:10FC7000C600977EEDB284795198B841E9E79F6B51
-:10FC800086B17B710B4298A735721C8BAF67A4B00D
-:10FC90003FC92BF277D346100DF657D39E72B07B37
-:10FCA0005BDF0BE502FCAE7ECA1184B8E4D2FB9E9A
-:10FCB000B3813E9A2FAB85C057B3CBEAC68C2B835A
-:10FCC000F84908EB5737EFC679754C70F3FB72FBB8
-:10FCD0008A217E55CFF39EEB4DF9BF8B9D7B311E64
-:10FCE000B7789B31EEB68484DF023E6DF8DDE079B3
-:10FCF000BFEF58D83C140E8FF972E84A1B9BD7F916
-:10FD0000E3E8F797A6F462DEB1E20E65D4217C1B2E
-:10FD10003CE8AF64C6E3B99A5B87BE5E12EBBE985F
-:10FD2000EE16AAFF29CB3DDEB2134BE77882EB1922
-:10FD3000A2846D5E3A4E2397CB9342EFD8F4F983B9
-:10FD400073395C9376B2FD6F735EEC5CD05700172D
-:10FD5000BECFBC74D60B53002F029F1724906ECCDD
-:10FD60005F4D215E8E172FE045C03FBADF4CDFCBE1
-:10FD70008B451702FE84E5DBC53379D1F78403EDAB
-:10FD80002BF3FCAFE3FA57ACA39DD7079A7F3BD781
-:10FD9000B7677BFEED5CAE9BD721F8583C177C6CB7
-:10FDA0005EB798F799D359C8763A7426E44C23A9DC
-:10FDB000F3605C96CB150167314F01AF9E01F25D98
-:10FDC00095E63F18D6A3842AF1B0FC7650A420C74C
-:10FDD000BA2FC4942BA57917F63BD3F508793BD0FD
-:10FDE000BA849C35AF4FC85BB14E2177C57AA75214
-:10FDF0004182F210EE7E90C07FA833D8C3157062A6
-:10FE000041BF0F64FFB9A13EDD7DA3A1FF0F3257B3
-:10FE100018DA2F54D718DA2FF2AC33D47FE4FD95DB
-:10FE2000C9AEDF6C68AFD51E34B44F0987A681DD3B
-:10FE3000FDB7966ACCE73EFFC3BEE7A01E6C7163B8
-:10FE40007D4F4B26967B5B54E4EF7D2D1E2CF7B740
-:10FE500078F1F97FB59463F9428B8665A8C587A5CB
-:10FE6000592ECCFCFD650AD8EDE5A12EF407C68F0E
-:10FE7000AFFB0CE4E1014BA03591C2E99C37997DC1
-:10FE80004E02667DFCE55B37815E77B37BE8DA7A0C
-:10FE9000274B6A0C7BCE45F59DA6A317574D98C0FE
-:10FEA000FEB28BC4CEBBFC6A1CCBF7C17C3D4A9B27
-:10FEB00073ECEC5EDB397324CC4F9C43D879055A44
-:10FEC00006EB68FB4C85F841FFD73A15DC8F22FC26
-:10FED000FCF0256C9A70BFBA3F0EF4775A2A9E57F1
-:10FEE0009A0D0FE97C654DC6BCD64BCAFF82F980DE
-:10FEF0005738D9DFCDBA7CFFCA7FDE44DB499BBFD0
-:10FF00008C9D8710F786BC6E3913BBE12B386300DC
-:10FF100079A09297FDDD9464C5ABF70744F9D771DA
-:10FF2000CC1F98D9CACF0B1C2468C7097EA4EB6BE1
-:10FF300087F90BBEA8752BC1512ED0F7EBA641FF58
-:10FF4000FF0B270420E00080000000001F8B08004A
-:10FF500000000000000BB55A0B74146596BED5D591
-:10FF6000AF904EE88400411E76886020AF4E271D7A
-:10FF7000C26B2812C01762A3B2038A52A0189E490E
-:10FF80000CCC8AA37BBAB11904D6B39B193DAEAE93
-:10FF9000E869705076D6738890B8194D980695C761
-:10FFA000ACA3514141B3D820F258133A121470381F
-:10FFB00087BDF7FE5574572701F4ACC9C9B9F9AB31
-:10FFC000FEFAFFFFBEEFFDAA961D70B98300505DDB
-:10FFD000B63A0F0A904E918EDA902E5BF50398FB9D
-:10FFE000E178D5393017034C95DF08A696009C3D83
-:10FFF000046E1BCE1FD3AE9EDAE1C27F2E5D9660EB
-:020000021000EC
-:1000000000C04A3BFE8FE3B2CEBA8ABEF86F51B849
-:100010001ECC740D7F2EE35FF1BE2630E7C4C6E32D
-:100020002ED4BF4BF376FA55305B009AFDB3998618
-:10003000FD8BC03C0260B7BF86C7EFF957F1788FE0
-:100040003FC0749F7F1DD3BFFAEBF8FE07FE177801
-:10005000FCA13FC4B4D5BF95AF37B89D00FD01CE1C
-:10006000B5560C54F3F06834F6E286F6C999BE141E
-:10007000A4664167D3813C48ED60C9C8403A5B62E1
-:1000800079E0F500A4330DAB787F59E63B2C0FFCEB
-:10009000F1D991DF59A0FD64F4334329C0BD20F8A4
-:1000A0009F55F6DF17A5541AA83912CAEBBECC3EED
-:1000B000B04102B81F02F9F391CEAEACB38C97E811
-:1000C000FE14E709948714F8C274391765423F9308
-:1000D000BA533C289CD0E526032C71ACB1C2700009
-:1000E00094D2B108CAD704125CCE02580C612BD04E
-:1000F000FD3F5A8E45E2E4BC14200BB2F1FC6F5870
-:1001000078BE7E1DE8F9B875E50A19CAD2496E2E87
-:1001100096DB7288F07A36F951778D83F6ABB3D2DD
-:100120003A89FB2E71BC67C5410FFBB6F2F3D7DAF3
-:1001300057D75315C07C9ABF2653A9DB85EB2EEF0A
-:10014000D3F6A06CEA411E4E73E795F5500EFF32D0
-:100150004AE8554E9962571D64A70E30A11EA3218F
-:100160003964C3751665D5A5D2BA6898A980D71722
-:10017000B7C8AC0F302BE641A8B74A4D6FED10FE63
-:100180008CF45239A1723AA0FE166D34F2B3C471E8
-:100190009CE5FE3D34F7C86F153CF39D9CDA9DDF6E
-:1001A000AA09B79CA4F5AA34B9F1753CD7AA366957
-:1001B000DB7B71F356B853324E249363C118920B14
-:1001C000F2E10E93BF1D90D9DF7AB38F337E607B4F
-:1001D0003FEF876DEFA1FD9FB984176E0078D23D88
-:1001E000ED85C0845F4E6FFD8A7DEBDDE44F6827AF
-:1001F000E447BA1ED7A20D019E7B6DB93D1440792C
-:1002000046BD4E33ED1F9542C154D2CB4570AF462B
-:10021000794F6EDE7B88FC64B2DD1126B92113EDC7
-:10022000F17A9DD42E2E4F3C1E0AA6E0FCF16D0102
-:1002300099DC76EC0135E8C0F1980F14D434C699F6
-:10024000F77C32E97DBBBF89E550EFAF671AF39FBA
-:100250009BD8CF60105ECBBE7E3F8387ED268A6B36
-:100260002BB43305D3A0CE8401ABCB314D4E413EF0
-:10027000BAC2E0A6EB45075C413A57719B22A7E260
-:10028000B9BCC7D5209D7B2DAA41B1519C0CC87D1E
-:10029000F1BACD0C611BC6115BA6099438B98E3D2D
-:1002A000170A521CD4E35A7392B0E74997EA658A59
-:1002B0005B4EABBA7513CA13DE4E726F71753FF7A2
-:1002C0003B6E13CBFDEB74DF3B6EA4E0708DF4E569
-:1002D00093FDB4BFF612D94F43B2DB86CF25C66972
-:1002E0003D2EEAEBE872D3E558EDECE2B8BF6C5571
-:1002F00017C7BDC47DAB4DA0D6A3DC3D15AEE25AF9
-:100300005CA77D35CC9B89E33A0BD2BCEEF33FF181
-:10031000947F48F632559ED0AAD0B99CA6ABDA7528
-:10032000F5AAEF78FF5EEF6BFB57B7789D0B1CB11A
-:10033000EB8E2249C479303B4FD863FABC5EBD4F87
-:10034000EC9C6DC85B932EA886BC3519236DFCFD13
-:100350000AFBA386F154E7E386F9B764AE36DCBF47
-:10036000CDB5DE70FF8E9CDF1BC677BA5F34CCBF85
-:10037000AB6C93E1FE4CE53F0CF767C8A048E8730F
-:10038000F952C8427E3607EA99CE8556A60F422713
-:1003900053152D89E80270337D187C4C977B54B936
-:1003A00008ED266AE91C407EDFF1D6DFF3C82E3A5D
-:1003B0007E35DE99E58AE5653D4FFFD47CDCC78A52
-:1003C0007AEAC11E061409BBD5E37DAFFA4988F766
-:1003D000D1228C2778CE686332C799684A9F9024CF
-:1003E000C5E2095AA489F2B1EEB77A7C299EEBFEE8
-:1003F0006805F9D107328C70758F3753CD581A784C
-:10040000E8BA3BE781FCD8FE41132C223BDB8AF49F
-:100410004DE4A3EFDC88D915C74F01F181F6367999
-:10042000CE1488E0F5194E5042387F861D322E508A
-:100430002CBCD495370B03C48C0BA828B4E71FD36E
-:1004400095429277E0E909692772B5B87423EAEF1B
-:10045000A889F981C5526804CAA3A9418CF317A6DB
-:10046000317FF74398F5F800442CC4FF3C008ED34D
-:10047000F3C1C5F42150589FB8727201C6A7850D0B
-:1004800066CF06E4B330BD7338F967FED8C3E9120E
-:100490009E0B4B3B85F82934C13AAA6F743E6A35EE
-:1004A0003E3614291574BEC2F4D60DCFE2FE9D8DE2
-:1004B00026D88CEB9C1CFBF82310978FB77ACA6F59
-:1004C000A579DB245028AF065A6CA12D59B47FE7DB
-:1004D00000CA07FABCE59E8A1945B8EEAC22607DD9
-:1004E00043EB5F80F433D329640F53FAB30CF0B9B4
-:1004F00061BEFC9EFC33C0CF15922C6F0071A18CA5
-:10050000F7E5F1236FBE317B4D1EF313A03A6EABBE
-:10051000479DC7E7B7622CA0F3BF6C0B6DE67AABC3
-:10052000669884E7AC7CC566A2FC7F18E333DC0CDC
-:10053000F0A5DFCEF47FFC4EA65FF933991EF5BB24
-:10054000987EEDCF61BAF0023280FA3B59A4541183
-:100550003FBDF1D17B9C117C4425985DEFE87EBFC7
-:1005600052F3878286E34F25931D34C96EB2D3FCC4
-:1005700046344C3CF799E63121392B5EAEEA13C480
-:100580006741D3A77F185F42CF999D12CE3FD3D446
-:100590003580FC37F17C57E4D16215F2D0CEBB2D0B
-:1005A000AD75033DBFAD71389D10E308083B247D58
-:1005B0004A3DF1B19AEDE4574522DFDF65EB2C713E
-:1005C0003A62FC01951898676AB53C3355BE944A67
-:1005D0007E3193D61D4B767DD347B45F609FF04349
-:1005E000D4EB3C5F9C3FEDD0E4A0D3FC16AB8FFC7A
-:1005F000695BCB6777DF81729831EE36AFEC8ACDDD
-:100600007F9584E025FBBEF8EFCF66F07C276D3543
-:1006100007364D75E2BCFBEDBBDE27113CE03C3AF2
-:10062000350DC7F332A53D44E7BBB2A6A5531C80E8
-:10063000103FFF50CEE43D6462D3DD33AD544F4CE8
-:1006400026A78A8BBB15768C378638DFCF30BE2540
-:1006500073B061FE6DAE6CC3FD3B72720DF7F57D3C
-:10066000A7BB8B0DF3C85FA9DE463E58EFB0450E21
-:100670008D90C80ECE7DB194F99F5342FC47517EB8
-:10068000562C1C4E95AD7FFE590A1B8DBB53C93F9E
-:1006900013EBDA652DAFEE515CBDD7B555E0EB1B22
-:1006A000967AAF677BAB07AFB7AEC538F2078A2340
-:1006B000856FDDEB0CE239B68DBD78830BF9FBB8A5
-:1006C000A8E77A37AAD5BB897674C55E2597B09F0F
-:1006D000FD32503DA4D7BD897604F094560708FA40
-:1006E00053FD7DC627226F7D437EDF2FDEBE351A88
-:1006F0002A32E499422BE617D44FE7DF64D84C172F
-:100700002EE139743D64C7EC1F1EDEF4FEA012BE5C
-:100710001EA0BAB68AF202AE9FEC91C4BACB76BDE7
-:100720003F2823761F561E35CC8727A53D86F19A94
-:100730002CE3F899C97BE29FEF2D1E556E7CD4AA5D
-:10074000629CAE7C4EE27C95785F3FCFD4DD490A57
-:10075000C54D73B38DFBA92AA7028A83AA26CC2391
-:100760003DE4753D3ECC91A1A6A73837405B77FAB2
-:10077000EE24907FC6BA87D156E83C81FF12F9E695
-:10078000705F057C71FB647944FDD79156F74F3F4C
-:10079000E0BC8E3F839B44DF9126E26E41C34993C8
-:1007A00089F25F1F612F05CE88291D69745172007F
-:1007B000D09FAA17A7044C85787F78E7677654FD09
-:1007C00028CFA017EDA8B72F4C2643FE8952CCC3E3
-:1007D000B1677BE61CCA3F77EC4E0A9B7E063F1E44
-:1007E000AA399016960BBF7F90EC46ECA300FA470F
-:1007F000F5EF40DF57A13841FCD378A967C8E1E79E
-:1008000070DDEAFD220EE06D47623F7B7F5C3F0BAF
-:100810001B85FFDAF197EA9D2A084D73106E10468A
-:10082000FF875FCEFF67781C195CE7909FDFDCDDF8
-:10083000AF75BFAF3E28FCFE6CF3F79F509C3F8B1B
-:10084000F92FDEEF75B9E9FE5EFD82CC7EA95F3F30
-:10085000D32CDF1AEA41CE65BA5F296EF6D75AA7C4
-:10086000D8B776E2F9BB29CFD5B6A086A4EEFBE8CF
-:10087000B47A9D0CAEB87DB6EDB42D0A39627C44D5
-:10088000F5FCDAF27DFAE43C415753FE853A2DFE41
-:1008900088BA06F3AA2583F2EA4CC9BD05C9C196F8
-:1008A00081E524BF8312845D1E5EE25E3B9EEF1EE7
-:1008B000B11C5D77507D06993966DAE76E4DAFF76A
-:1008C00068F8D2AC96592328DE7FD6B0E0A042511A
-:1008D000CE93CDFBFD1A025C1F1E4CF30D5D4175DE
-:1008E0006850D8F9C1B4CE76C2A30E4E4C9682128F
-:1008F000AFBF26BEFE3B68F10DAD61BE345C4A1948
-:100900002D5F4EFE09FDB21617519F0149F477EC99
-:1009100007E641CF30CEB018427B14DCB7CA1DE6E3
-:100920003A7529085C20B1BEAF9AF0AD95F24362EA
-:100930003F3AB969D721A9A0071C23C16EAF855BD7
-:1009400024F6C1BDE10F3FA6FBB678E2F0C3C47A3E
-:10095000FD4A5DAAD7555B92439BF13CEF4EFCB735
-:10096000334B71BC724BB293FAEED3AFD802149FE3
-:100970004F6FB68524BC7F3ABDB38DFA90D3DBF3BD
-:10098000DDB802549A5CFFF906E5F93F59D82E000C
-:10099000DCC23FAED8E9634728DED56E499180EAD4
-:1009A0006B55DCD77B40F9F514AE1316EF1814B273
-:1009B00049B13C43FEE1C2D2E2D4CB490A15FDA7BE
-:1009C000F7DDD397F0AB76D39BC3180F939F3CF220
-:1009D000383EB7F4B5140FD5139007ACB7459B4715
-:1009E0006DA2FAF8258BBA97F8AF78FDCE8159B48D
-:1009F000FEA7FD81F88936EF1840F551AC6EEFB9CE
-:100A0000DE3BDB9CDD17F26272D2F1C4757F5CEDD8
-:100A100023BD274B2EBE6E861A6530D945D34CA018
-:100A2000753DB2A4905F76AE4FE63A35D1EE8E7842
-:100A3000449FB24CC71FFA813D93FC47059643740F
-:100A40007DEEE60D28A71F3CE95ABEEE1C79777EA5
-:100A5000BC7DB655BD43F6B9D1C6B8487B92B16EE0
-:100A6000D0E9FF7AD2789F4AFB39030E51B5EAA24A
-:100A7000719C87FD1E3EEF09BA8A1F45BA42937FDB
-:100A8000D7685F87079F5F52FFFBB73E60B96CFC7A
-:100A9000C72F68DF7D0E81C77C20E497D80F54DA1A
-:100AA00005EE01B089CFAB5F3FF9F2E70564872718
-:100AB0001B7347921E17C8AD275E423ECFA4B41EDB
-:100AC0007902E9F67D9FB05E12CF9B88DFB44B12AE
-:100AD000F3BB8CF8C0EBF77A7D72717F7667EEE33B
-:100AE000166CC867F94D95F3FA921EA3A77BE957D8
-:100AF000B473EAEBEBE7D3D7D7E7398B85BE3ED4A7
-:100B0000F0F70E6BEB19D26FC75BB912E18357AEEA
-:100B1000A7B716A4C5D9CB2F85CBDFA7E123874C78
-:100B2000AB7F63457B6CAF7FD6A2C6C7BD9F88C72E
-:100B30005FA907157039078854C2790B9933E37898
-:100B4000A23E2667C0F104ED78129D07FD72A24611
-:100B500061899AC9783BAD873409423C0E4E76BB19
-:100B6000884E927C8C7BE87DC334A819427C98EC3B
-:100B700011C609D7103E8975CBACB4B57766E17E56
-:100B80006BFAC35AAA67D658845F04E627733FA757
-:100B9000CB49CF33E0CC33E497354E7099719DD972
-:100BA0006658674917F36E44391FDCB7E07DC25DB4
-:100BB0003F37D7F4A77D0F3B9ECB974C54E7855228
-:100BC000A867FCE2933F79FF8673BF046522D515C1
-:100BD000F7EEB573DC4FC4271682CAE34A8858CEB5
-:100BE000E1735F8DFD71CB6E88F1F5D5B81F1AA941
-:100BF0004FB83FED292F3D1F28871CCA4BE7935262
-:100C00000B889F5576411FEB93BA99E869A723405B
-:100C1000B8ECF9A46121CAA72F49EA8364CFF81C74
-:100C2000F7B18123C921CA778FC96A15E3D0695604
-:100C300090707EB4BF26970E60B9442DDAFCEF5C4D
-:100C40003C2EA9F0304E09E75D1C97C727E49D9222
-:100C50005C93E8CF2E8BF9133BCD86BC5352A8E1B1
-:100C6000397F77719D3AE982F9AA79E952B1E8773B
-:100C70004BFA996A7AAA179FD5EE07212C0B9C474D
-:100C8000D40BE3AFD89722931EABB47115E535B4FE
-:100C9000AB68AA3D2023BFE39B859D8D37877711E5
-:100CA000C5280BABA8BE68C2BCA79F03E30A64E6D5
-:100CB000B23D8CD3ED14D79A8BF3D64A35DCC7D826
-:100CC000A9AE41BA416AE573FC0A3A992A5A3E2F05
-:100CD0000737D329E0638A76CAF456A8637A3BD4EF
-:100CE000339D0EAD22FF8F0E0739AFC1934EEE0735
-:100CF0006FAB3451DD51F2EB9EFB87462D9EF42EF7
-:100D00000774BCD29F2E876980FE97DD833C86E402
-:100D1000701C499447A29F4E8488CC7E4A01229B36
-:100D2000F00317FB6B05283C9E7A9D72288BA86602
-:100D3000C66F12E551D1B35DECD4ECA2966CAD7FD9
-:100D40004C4F5DC52E1EEBFA42FFCAA43A34518FB8
-:100D5000FAF592E4F22E1786E22F761C9F63C6BC4A
-:100D600054525CBE221BC7EDC5DFCF31633E2B1949
-:100D70005FBE63388ECFECF8418C0BCB8B2D6EECC5
-:100D800062569F9F3305E7ABE49F8544D10F299EB0
-:100D9000A9A23F5EA9D531EAEADFB89DE82FEA5063
-:100DA000879BF8B463B19F847294B3C57BC761B766
-:100DB00086775B70DE718B7A90FC77B93D9CEA4256
-:100DC000F9AF5C3D752085CEA7AD62BECD26705AC9
-:100DD0009D3FBC1E48C2F1F6EDB92BA4E1D73E07FA
-:100DE000AEFF35ADAFAE1E1120FF551B25B7D06C41
-:100DF000F9C0D928C3F6560B106EAAEFF7D468F5E0
-:100E000014E747979BE3F760ADCE69DF9E9B4B7A73
-:100E1000EA2A163818646415931C8F8EF675D1FC77
-:100E2000688AB0B72ECAE5DEDEE9E012E53B9A9F9C
-:100E3000783DFA0D1E009F3797A8E7E97E75F225E9
-:100E4000CEFB678A3E5D1BC98AD9AD844A9B8BFC69
-:100E500007150859393F4C705EA95329DE2DC4751A
-:100E6000501E253E3548216ECCDCCE528AABB8AE42
-:100E7000A904F7A9B6468615E173CFDD73C42AEC41
-:100E80006E88B03B2D2EB5ECDCFFC46031F4419C84
-:100E90009F55EFBCF8C39728BFEAB30E374D8FF9C3
-:100EA000D78B2BB8DF0487218EE87E37AEC9C6F515
-:100EB000F6F8E6510B69DEC44FDBB289AF496D111C
-:100EC0007E8F166DF97CB03887DE879C977E4E3E0C
-:100ED0003EA9E58993769117E8BD30F77B8DE2BD99
-:100EE00070AD8673D6B648A100C71FD13F2FD2F888
-:100EF0005BBEBF710FE1278B363E349DED2824FA8F
-:100F00000A17FE525C587248F4CD4BB71AFB8D6A33
-:100F1000EA9B693E84AD640FCBEB13EE6FACE0BE91
-:100F2000B93A3EFEF7D0377B4B347C6C280C65BE5B
-:100F3000E4B97DD51EE261625F5C05CA8412AE7BB6
-:100F40007D32EDEF35F78C3FF42FD0DF9389FABD7A
-:100F500052DB9BE4E460B958B99FA87D7985DB49F1
-:100F600063CD6F3799A8A7C689EF7D04F1CFE97EDD
-:100F7000BC789DC47D076CECC73658F89A4D217E2D
-:100F80000B5F1BC87D08F64B5C1F6E7ACDB68EC614
-:100F9000C1DFF509C885844377DE40384C3009EB62
-:100FA0004D81E783E4611C867191474BB4B8AFD59E
-:100FB00001102E32F4F3412DFFD7A68C1C889D73AF
-:100FC0006CDEBE4186FE24A8D5DB25744EAA1BB775
-:100FD000DE20EE27093E767DFC0FC954F7369A7D58
-:100FE000C9846B9F3D309CFB98DEE4EEC53404570A
-:100FF000794FE9FD7C7AF6D5F456F28259C84BB3A5
-:10100000DBB7FD0A7C6D89E945E76FAAFC4685954B
-:10101000709187C1493849EDFE578376EA0BD703B3
-:1010200023106741D8F3D953267EEF5E0A39FF3A81
-:1010300001C7DE536677089F6FD0E222BD7F76C579
-:10104000D9994DC37F935C7DC015D74727E7A41B73
-:10105000C629EE1B0CCFF52D1B6EB88FF2DE4CEBC4
-:10106000434069CD2B8DD5BD69CA68C3734FA74E68
-:10107000DBC77EDFFA08E352FD6EF518CF2337CBCE
-:10108000140FE09CA897CAF097FC6D0C0482A48F03
-:1010900071EDC63AAA2C52C77D63D201B30107B0E5
-:1010A0005D0397DA44FE457172080C11712351DE1D
-:1010B000C6EF2F6AF7CB5CEFD50EC54235AB27796B
-:1010C000DF6490B7EE8FBADCFBFB8C721F38DB2835
-:1010D000EF41AA51DE831719E53DB4C628EF1B572F
-:1010E00019E59A1530CA317BDD38C3FC1175E586E8
-:1010F000F1CD2FDC6E983F2A74B7619CBBF53EC3DF
-:10110000FCFCFA0586FB854D4BAE4BFF45E15AC30F
-:10111000BC44FD17EFFBED55F51FC05FA17F607D5F
-:1011200094A13EC2AEFF3F3B38A6C759DD0EAE3399
-:10113000CEBE4D3ECB78C2844880ECA02C99ED64A5
-:1011400046B2883B1FEE3B7B40C1F147AE624B2667
-:10115000D5595AFDE0D3E290DECF24F68D7795493C
-:1011600009EFFB930CEFFBAFF55D9DB7356C1817DE
-:101170001D00FE6EC673C8FD2E51EF7185E1AED223
-:101180005335EF121D7B8ED376B77E55FF3E2FB1C0
-:10119000DF826507F8BDE25CFDBD0C394569777CEF
-:1011A00052EFC7F43E37B1FFD5FBDEEE7D9AA86360
-:1011B000BAF71BEE4C33D7D12AD7D57B259571CE04
-:1011C0004DA3D4C15E2F3501D8279BA84F8E04852F
-:1011D0003015A0F7D051FA9F8A90C0B3F7111E1FA7
-:1011E0004D03C6CF15A9EEBE401E1FDF192915F00D
-:1011F00011FD147BD5115ED4EB31C9B9B698F089D5
-:1012000071DF0EA37A24C72BEA3C9B8C92C2BC34BC
-:1012100070AE0274FDC7746594D71BC34B7AB39B41
-:10122000C4EF931AFC61A666A79BBF5F4AC417234D
-:101230002617D7A781DF4AFCDDCFB774B8B1B13A22
-:10124000E6EC3A0BD731A0F5F30F68F2D7718FB9FE
-:101250001A3FC770894598971F68DACB7A599AD98F
-:10126000AEE125355C8F3F34C4E1E1EFE19462B734
-:10127000C0C9741C64B0FC53EAAE6BF1BF34F3B464
-:1012800001878237FA5DD7FBF218DF62FD63EB0559
-:101290009E796CFD50C6CF63EB9F613CEA819A8FCB
-:1012A0000DFE316FD561833FCC0F1C35DC8F64742C
-:1012B0005A087F8CBC3568DAFD28BF8E465B29E969
-:1012C00003EDE011D2ABBE7E647DEE14DAF7DA7C7A
-:1012D0007ECBE768F3B7B27E753E8FF80FF138E248
-:1012E0008F247C9F26F8D4710E9D5A77438E99DE09
-:1012F000274A7DDC842BF7867FE87E662A1DCEEBAD
-:101300009C37B94E089CA8660CD57F6D930794D383
-:10131000B9DB865ACD828E14E3416576319E762BF9
-:10132000D1A8C5B18E709136497C4F3457525E9921
-:101330008FFB3E314A7D9AFCA17A496701F95F75BE
-:1013400061E44109D7EFEAAF6E20F948D85E0C4A54
-:10135000673EF8BBB353A6408184AEB2C7FBF57DB0
-:10136000D4279EEA13384315CACEC623626C15FEF5
-:10137000F8A1771FFBDF715C8CF80CFC5912F89414
-:1013800023629D89EB64F4579FA77DE97B327ABF86
-:1013900047D7C93E75BC346A11756254AB175FF606
-:1013A0008A7AF69504DA44352EE18F44395E3F336C
-:1013B00092F0F4B31B6D40F52DEEAF984A62DFAFAB
-:1013C0000C405EA88E7DDF2AFA4CCF5F6C618A5399
-:1013D0003AAEFAA6378BD7CBC8167869C63F63DC1E
-:1013E000223F8CB40E9B991277DE03C0387607E15A
-:1013F000D17138F69B5ED1AFC3C322EE75AC1FCC62
-:1014000078FBF2FDC78E50FCBAD7AB36925C1798CA
-:101410005CA5FC7D56EA2EC6CDF67A5DBC2F9E9764
-:10142000F9C538B486F4B4DC1E619CED5AB87A6F05
-:10143000FC772C6C7D3E8F71645701D98DBE2F9E39
-:1014400063AF370EFFD6CF115BE7EA7EA0E3C3FAA6
-:10145000F8E4CB4F8FD4F0FD79BE1EF2EB114D2E88
-:101460006D969EF1F88B5EF11EAF9B7E6E0620FCA2
-:10147000DFD607733FD26FBD82FF8E39C80FE31BE3
-:101480004A11E977F9DD0E37C9595F1FD751DFBC23
-:10149000CA3E5DA37DDF10FF4B6A047EAFDF8F4A3B
-:1014A00042AF81F5024F5DBEF3F091277097C5AF53
-:1014B000E717533ED09F4F9433CA77247F7F278B03
-:1014C000F75F28DFB3B47E226EFF73E51A1D2ADEB4
-:1014D000D346375D1C46DFA72DA7EFE10AC83E04BF
-:1014E000FE050D465C0BE515207CA3FB7B2DE0F78C
-:1014F00063362D9FD8F4E787980DCFD7A7F8924A87
-:10150000F1FC6F697103E7874CF43DB7169F1AB47D
-:10151000BE3B117F696815B86943A695EB68AA7F41
-:10152000E8BE5EFFACFC58E0A62BB3449D4DE7241B
-:101530003D4B87F670BD7005179730DFA31CD3AD08
-:10154000EA9052F2277505E733F946D433BD0FF917
-:10155000EBED1A8E20F2A357CB875E5A87CE95D734
-:1015600097F36489B62FF6178CDF8D0555AB1F34C2
-:10157000FC6DFD1E03FEF07FDDF5EC49303100000F
-:1015800000000000000000001F8B080000000000A9
-:10159000000BFB51CFC0F0030947B0A3F20FA0F13D
-:1015A00067B2A1F2D3B850F9875950F9FE68FAD161
-:1015B000713B13030323137E35F8B0083303830C08
-:1015C00010AB00B10E33F9E680B0BE2803438104AE
-:1015D00003033B90FE23CEC0E00E641702B11790C8
-:1015E000DF02C45381581C287E16484B8931303C99
-:1015F0001185E8B300B23F8B9167A7192F656E1E66
-:10160000C594611359543EAF1A03839B3A03439F19
-:101610000684AF8D24BF1428C6A70661EF976760C4
-:10162000D004F29564B19B7B0028AF0594DFA681BE
-:10163000DFFECD3AA87C0733547E269A7CA30B2A82
-:101640005FC30D95AFE30EA101C062BAC4D8030019
-:1016500000000000000000001F8B080000000000D8
-:10166000000BCD7D0B7C54D599F8B98F99B933997E
-:1016700099DC241398BCE02604081A7012C243C4F3
-:10168000701322468D6182687197BA23AD36A240ED
-:1016900040D6C647CDE41D5E1AC4EE22B874E213EC
-:1016A00094D6D462FFB4AB7402B8D2966A54ACB488
-:1016B000B5DD485D6BFD2BBFA0A2D4D2B2E7FBCE57
-:1016C000B9997B6F2601B4DD5FE3E3E6DC7B1EDFC7
-:1016D000F9CEF73EDF39718A0EA2CE23E40CFCD09E
-:1016E000E71B84FE64269E84741332039E03727883
-:1016F0002A3CA3FC3D7B0696F60AA4008BFD6426DB
-:10170000217984FDE43576AC16A7113296847E3AB1
-:10171000399F96076EAC217E5A7EEB8A3FC2B36337
-:101720007165F5651A21594B7A5FBD9C3E03E198BE
-:10173000102926640B1109C986FE0AA3155E42DA38
-:10174000A0B339848C8966E9D16228E8B440C8BF67
-:101750002A7C20226A322DFBF0D7C43C8C27214EF4
-:10176000122FC28AC219D7F0F6F6FAC6D307ED8C4B
-:101770003AF9F0FF3504E677B676642D1B2F4AFF61
-:101780003943F19293181FFBC9AA379509E0C7FAAC
-:101790005D1FC2FBEAFF93F1B249A95B2BA3F3AD36
-:1017A00011D518D427BD69322D076E93495CA0DF8F
-:1017B000CBBA058776F675E920A4BAD78BF815EA77
-:1017C0007C09F8AE2502CE67DC5DEFF474060839BB
-:1017D000B9D41B42FA5009C9481F3E9F6F371112F6
-:1017E0007799CA8B2B85088E17FA69216D1F5D2C9E
-:1017F000861E07786A16A5C17BA3DE37F938C3E9D0
-:10180000836832C5A3CCE943AE1175F7B42F4F1FDF
-:10181000F217A48FCCB5A676E4FCD70BF13EE3DC3F
-:10182000E9E3CB8E67ACEB70BE6A4638C6DD55E89F
-:101830002674FD1FA85E941A49526FE4752D457EEB
-:101840000FD4103D96A4DD3A584F9C67D4226FF018
-:1018500049D7471A5ADEDB2DEB258D9DB9A46714B5
-:101860007C4801EB7C8D7E9D8D92F64E062DCAAA9A
-:1018700008FDC9BCBF0E75599400DD026D537C484C
-:10188000DD257142F9830449E8710E8148CB4E553C
-:101890008FAD17A014C37531E0530A45CB788E5C29
-:1018A0008F653DC892A86086DFD9E844386460132C
-:1018B0002EEFC228DC18DC30C4990950BEDBB2FE22
-:1018C000B297C4DD54AEAE2B2C25E67530E854102B
-:1018D0000C3ABDFBDCE48A7DBCC55638CFB99D57B8
-:1018E000D6DE35DA148CD64E26EF1A78A2C87B1DC8
-:1018F0007E31AD7BA783EC152E22A435B7230A6F6A
-:101900003BE17F17237D82D0229DB9A52AD013D930
-:1019100029C800A7DB208F603AD6EB211AD2535496
-:10192000B883403DC91B463C19DF47868BD35D54C5
-:10193000EF2BA4FD5ECDBBBD9AEB3352E67867C0BA
-:1019400080BB00E79128D3797C7827FD1FA58F689D
-:1019500089107B5C18FEBD06F421954735F0DE2426
-:101960004F5C82559ED5F06F079E7B73D2744A8F71
-:10197000FD218980B86A79CEA557D1FE5FBD548814
-:10198000B9040E2FAD5FCBE13CAC67E4017DF657A7
-:10199000B9907E6B2FFF2C00E47B7CEFEB72327EE4
-:1019A000AD9DEB48C041FF5B659E1FFD6F0C8C81B8
-:1019B0007C59857464C0B5A2544238FAE70A3118DC
-:1019C000E7E06FFF70DF2514CEC36542C8A521BCD8
-:1019D0003E42C7EBD73F0E8C26278831BE4654C007
-:1019E000A77DFCA1F550424B802FEB55A7B69E8EEC
-:1019F00077AB143A047A8C8C65FAA15E9D5405EBA2
-:101A000023098C3EE60B59D8AED5DB3206D75D5A9A
-:101A10009A545ED55345A196C2F78D93468533E619
-:101A2000181C30D175E35BF9F71D34C13955F00549
-:101A3000DE4DA1BFCC22B3609D3FF22E4A8D939123
-:101A4000FB7BBF4969961D847CD6A4DD77D031FC31
-:101A5000FBAD1269E82D1EFEFE4A41E1F8883AC14D
-:101A60003E33E63D344F6F00E9FB5610BF94D46F10
-:101A7000DDE96E96CDF2C7368F21FC7EC1764A60D5
-:101A80004D345B037E8B2C14A01F99FE3333C18F22
-:101A9000B7EEAE637C6783B73DF0B781F76C7CFC33
-:101AA00091B7A503ECD55607A397B64C31D442861F
-:101AB000D38BB11E061ECF753D360A6EE40F838EA2
-:101AC000EAC5A5A3AEFBD9E8E80EA0A30BFFFE7400
-:101AD000B405E868C63F241D6DFD47A4A344F97210
-:101AE000B41716F2BEFA067EFF20C8E75FEA12CAF4
-:101AF000BD5FCE65F2FF97112617FB4964D30CD06A
-:101B00000747249453FD7AAB0FE1A52631CC03FDA2
-:101B10002E4A7FAF83BD3499CAF526059F74F679A6
-:101B20008BE8F7572FFB2C17F4D7AB746DC1FE264B
-:101B30006450D769FB5786CAD40087B29B95079B30
-:101B40004F45C13EEF1758F927CDA7F4288EB7B1FE
-:101B5000E3728ACF85F02B8563F15C418F25A18BE1
-:101B60009F094E86972A62D1AB745D7E26507A51CA
-:101B7000C2ABD1AE26244CD03F2CA47682C9BE681D
-:101B800004050672B9CA85FACFDEFF2BDC2EB4DB62
-:101B9000718BE79638405FB8C227E401FA5C1816EB
-:101BA000B00CF8574D708BBAA0831E08CF753D025C
-:101BB000FA2F2C13879A845F17EA2E8BDD7582EB40
-:101BC000318A9725CC6F51F3EAA626EA9F30F4AF0D
-:101BD0006D3E23D185310FA37CCDDC13073360DE4E
-:101BE000D54268223454D4BC1B7CE6FE530CFBC6A1
-:101BF0000778FBE5926B52191D4450AF1AF4F4D3E9
-:101C0000B7BFE180F993C51948978B6B248B3DB919
-:101C1000A82AC552BE6EEE35A3DAE12462C28389DA
-:101C2000EEFD3904E994FC37B553289D462B072374
-:101C300068B71C13B4565A4E2D6F1C0FFDDE2DA62F
-:101C4000637DA1BC71F200DA5B0B90FE53789FA913
-:101C5000CE863F14805C9D28924734B04747F70BEF
-:101C6000DA399D1B6547201215E87A6A51B5541A76
-:101C700005DF315DAC4EE6374C10D9BAB54717A930
-:101C80008500D041ABDC48AB6A40FBCFA84FE97878
-:101C9000829809E346F1FD101D77D179D1761E6651
-:101CA0008B90D40B16A59251E6D1665B7F2AFEF588
-:101CB0006472F6560E1FD9CBFA3764526A3AED3F7A
-:101CC000497DE3D9C9FB3F1512493FC0298715E477
-:101CD00087A24A62EE87E8255876F2A22B1856F2C0
-:101CE000293E5DC5224C83B4173FA2CB1AE0218A5E
-:101CF000EBBD81AE6DAE892F37FC45423FFF56B13B
-:101D0000A019E4C686BE5B8846F1E109C60896A71D
-:101D1000DEAC009E365027AB1FC6977B09C0919260
-:101D20004B7FA7E3A4A824A6D1FE64AD372ED2B280
-:101D30005C4D423AFDE453438287CA89FDC1826605
-:101D400099BE6F5B4A503E12901E26FA690BBEA6E2
-:101D50004B403F4B4808006E0B2CC37976142FEB99
-:101D6000CAA7EF4FD6C8183F20A729BC865F4FFDF2
-:101D70000C4F11D161BC0D5924E6453B5847FC3A44
-:101D800055B67EDAD642129F4EBFA7CDEC83F1A3A3
-:101D9000DF228C2F09936B32972744A6F407E33791
-:101DA000AAA1F549E84F21915BC419A67556C3E86D
-:101DB000C7DAF196EA2457027EDB4A281F24917B7A
-:101DC000778822D2412CB46861419271EE16359425
-:101DD0004F46593BE544F847AA9FA82793780674D5
-:101DE000AD0B8017120EE0FCD2C9D08F0EE50C3E71
-:101DF000DF31A401EB056777F701BF65EBBD158007
-:101E00008B6FFBAE7B15D78D3CAC821D4BA12D3C5F
-:101E100093919017A073607E1F8544F43B7C625CB5
-:101E2000D569073E777F109D5F8D605C2E159A50B7
-:101E300080D737296D6097F8494880EFBE901C35F0
-:101E4000DBF5A984962DF11472A4702661221FBFC0
-:101E5000AB7DC03A6A51C34500CC16BFFE5FE03788
-:101E60006DF445D00FFBCCED9F06837DD3E37F045B
-:101E70009E9FB9C7C5D03F0B317F4BA1FF80BC4BA4
-:101E80009D2D5BFC9B34DD5ACEB0F9610B242FCE27
-:101E900033ED6AC2FD2BBD66E298045C14A23AA041
-:101EA00097CD553201FFDFEB65F018F06548F7CCB0
-:101EB00042FD18928F011C142D08C749723A0E4B2F
-:101EC000EC2F22183FA5701DB3C175CC06D7313356
-:101ED0005C8D0A9BAFDD5E8C5692A2060ADC0B225B
-:101EE000F73FA8DD0476E349F2815E0D8413BE124C
-:101EF000F5AC5F656DBC4A3F062B54A2221DD8EDA0
-:101F000046BA4E1F59FCAFD9BCAC1101E641E1B451
-:101F10007E27B9482F5896C8505C78D96C035FDA91
-:101F2000577E43F9EF96430E02FC45F95882EF0EB7
-:101F3000FEF5161E1F5E06FE35C5DFD749D80FF029
-:101F40007D48448C437D485EF34F37C9C9E322B7CF
-:101F50004F6089CD7C4C424190E3B2B7A35FF2233E
-:101F60001A0C7A13CEE03A86989CF732BA8B12A5F7
-:101F700019F56117F33F8D78EA4DDD567FF81B5B4D
-:101F8000ADE59BC9A231102FBDF9410789D17E6F04
-:101F900031FBF7749DDE105584EF1BA4A103EC9276
-:101FA0004E07B33796A94486F8E78AFFF71F336FC9
-:101FB000A4F33909F26006D8EF147C931E591E88E9
-:101FC00039F5E2E1F36B1542B5970823CFAFD3D1D2
-:101FD0005F0BFE77749303ED4C628F83EE91300EAE
-:101FE0006A6A87F07EADCB3ABFB3CDDF3E5F421E5B
-:101FF000C0F92EDF7923DAE723CDC7B933B9BDE9BC
-:1020000095044BDCC7E06B83DEEDFC5D26692CAEEE
-:1020100043D520DA2BBF4B89B5E2FA36CC82F53DA9
-:102020005BFB8BA17DE6176F5FFE25C79F7F96F652
-:102030002B94C105B0DEEB02DD61E04F238EB5923B
-:1020400044F51CFAABE3F9D55130DD86EA05CFB192
-:102050005E2EAD279D43BDC2D1FB3BCEED92977660
-:102060003FEA043BF5C3A7DEAE053BE0D6FF94880C
-:1020700042E9E1F86E1F89A3BD1273827DB39CD241
-:102080005D0CCBF199D798EC614AD1B80EB73EE31D
-:10209000433B62F9B3AE580D6DBFFC87BF9F462826
-:1020A0001E8EB70CFE570ED0F353028BBB4607A60D
-:1020B0005D43DF2F97C9BF8493D0D18D12E3A70F63
-:1020C0007E94B204EC446167DF0DD86FEF571C2E8D
-:1020D000933E5E2239705C5A0FFD88E82E213651FE
-:1020E00060F099FD0123DEFDC12E81C1B7D71173C8
-:1020F000037C3B7B9C115A6FD5CE1348D7F39FF9D5
-:10210000AE1FF0B06AAFD54E5FB5538ABBA6E1F300
-:102110006D7882061566023E193FAFDCB302F5C644
-:10212000CADE0D27809F57ED7558E43FC54B280E3A
-:10213000787D530AD540F9074FFA358AAAF7FB1F75
-:10214000F7035E69BF373A295D2D9C6D6D07FD9FD2
-:102150004A1FDE1FF50CD16F5ED5BB8E8DB7E7EA47
-:102160003F80BC5D45989E32F8F97DF8256BB89E9E
-:10217000592759E35B27C9E199B80FB83323A9FF61
-:102180006CE81583AF6FFDEEC91D513AFE07CFFE17
-:10219000FF1D513A8FDBFEFAF18EBBE9FCC83EB75A
-:1021A0000AF26AD5536FF88909FF8F496C3FE0F84E
-:1021B000AE279FD846F9E4F8AF5C68071E7FE10FB1
-:1021C000E3343AFFE3DFFFD318B053D7BE70D958DA
-:1021D000C0C7DAE7E68F1DCD5E07BA8DB9CCEB1B21
-:1021E000C3FEB5BD026C8210F23C7FDAD6E9C01E98
-:1021F000290E21820F8FBA622E8A9F55F45D6329C2
-:10220000ACDB0AD45750BE87E27BE5EECE13D2B4E6
-:1022100064788FE6884178C6734810D6FD9A859712
-:1022200096C1D311D2804EC820EA097BBB5547E83E
-:10223000FA5E34F27A527BC209F85FB57B1D1BB798
-:1022400097AEA77FF87A7E08BF5C3C7C3D0F48D6EE
-:1022500038D34972DB77B6C1C73D19B8FE23ADE765
-:102260008AE7AE1DD5BF33E4C3D9F05C2F30B8EE9A
-:1022700097F4D725E0C7679F7E625B80AD730D45FD
-:10228000CCF1EF9E1C079BBCEF39066F003939F883
-:10229000824B05BB7AF90B6F22DF1D7FEE55A786B7
-:1022A000FBD3C42B503D799C0CFDF483DE5C29B03C
-:1022B000C2AAC77C71973FB15E2B6375D59A1FDFA9
-:1022C000BF8DEF638C1F56C6FA160B49D6CF2B175E
-:1022D00030FD14CB44BCACD0FA9DAAD7BAAEC26CC8
-:1022E00058CFB71700FD8DB49EC6FC5598FF2CD370
-:1022F000BA3EC6F878247E3DDEE39285D4E1EB7CDD
-:102300009CDB15AB62C29BC9D69D901616DF1B21C4
-:10231000EE6D3CED74E194AD7C6EB437E67F363EF5
-:102320003FFBBCCE0F6F27B9BEB6E3EF83D3C9F531
-:1023300040812C70BDD55D9D6DD2776E07D563F958
-:102340006077364473F213F076F44A28DF3FD829D9
-:10235000A1BD6F97132B47F0EB43C6387BFBA681DB
-:102360003CFB60FF8F383D327A5FB9FB6D6794EBC1
-:102370008598592F407F49D6630EEF6FD5F3C9FB7F
-:102380005BB5FB44D2FEDE97F5AF00FCEFF73B48B0
-:102390009476F17EAF94344E52283B2C7656876F5C
-:1023A000E6D154DA4EF27B3498776B8BFE6614ECF0
-:1023B00091D71C04ED4739F49E8B7E6FF57970BF81
-:1023C000A5D57F33D14CFABBCD86273918463F5A65
-:1023D0000E84CBD85E68CCE2CF3A54D1023791A3B9
-:1023E000B9B0CFF972FE1F64E817E2699A292EF49A
-:1023F0008A4CDA219EF68A2E849A4992B896ADFFCD
-:10240000F05C8968663AD3C78BE6F8A27FFF9D1817
-:10241000D768240D718837915CD2FBB8A9DF879B00
-:102420003416770D8F17CDF13F574383EEA270E43A
-:10243000AE550BC07F1B69FCBC06EBBEAF31FE1A6C
-:102440001E8F203B9F7AEA295A1E0FDF44A0C3B09B
-:102450008E709C66FBCAF3B93C7C89DBCFFB0572AE
-:1024600010ECB0EA7B2232C83B217823C64517E442
-:10247000DE282F33D1E382E0892CD0ABDFF98BB497
-:1024800024199DEEE574D5FCAD27B2A0FD36F757B3
-:102490007299331B46F87278BCEB60E6E55E88EF14
-:1024A000F5DDB2E0F0243ADF6C552210AFC92615F5
-:1024B000DE120A67CE1129E44EB20EC673078FEB07
-:1024C0003DD2A4A2FC7FAC2988E527385E7736157B
-:1024D000E1F3A9A6107EDFDD341BCBBD4DD5F87C22
-:1024E000B6298CEFFD77FDB8CF0978B997F442BCD7
-:1024F000664FD312FCFEC3A6083E1FE7F3590078CF
-:10250000F15AE68FF198BD6DF35A201E63E0D18E2B
-:10251000F779247AD085FBF9820678BF5366F2C535
-:102520008EDF71AE5E01E44BE36D04EDD71D3C6EB2
-:102530006CCCF72199D99B7B383C3F7447BE27C3AD
-:102540007E53756131DA45241C02F9BD4308A79614
-:10255000D02A2F66CE0A9AE570B62FB24736ED2BF9
-:102560008CEB62F19E6D329357E3B5137D69140FC6
-:10257000D5B98206E10463BEFB2BB45C9093FB05E6
-:1025800001D7BB3A57224526BA37FAFB0F59E4FB6D
-:102590001BC9E576828E993C48BF422E02BFF624C5
-:1025A000F18424CAEFFBB2C81E42ED8F7D40972014
-:1025B000177E9B827162C3BFD9C8D73B1D8802F2C8
-:1025C00025DEF2C540FE8CE4F774F0FA1F71B856B0
-:1025D000C8E1D765DC57E6F15712C73826A41C01BD
-:1025E0003D6E732FBDBF8A3EEF9BF3FE51880F7E79
-:1025F000F89C5B03B836951DF39BF148EAE50FCCD8
-:10260000FBF143F2E6540EC6C5FE8744DE96CD725A
-:102610002830E884F6FB046D33EC5F47DF9090FFD1
-:10262000F609B12918C79209FA05FB6E09627E877F
-:10263000D1CE17B2F277BA7B60FB2A9877BD3314FC
-:102640004DC217BF4ED12CFB46AEA0B57D1074E62F
-:102650000C56D6287D96F07987645D02386690081E
-:102660003E67110D9F598EC8E7308FE9A4370BCA1A
-:102670002D29E32E61FB077F37BC298E7F40BC19D3
-:10268000F41A9C53847090BBC4D0440DBD490B9D7B
-:102690002F74081CBF0ACAF3ECA1FDA98697F202A9
-:1026A000D80D8B93A8292807B3DD0C7F8D03273025
-:1026B000BE1B1C472C71F7F67A11F960DB5B6C5F6F
-:1026C000EF647DC1E649B47E05D1EEAFCA1F3E0F6F
-:1026D000833FB629E1D464FB53C6D3E00BA3BC7996
-:1026E000FC0D04E4D0BF8FBF01F38EB2DF726BE04C
-:1026F0007754FC6E5733C8C5F6B7597EC5514F6441
-:10270000AE634642CEB4DFD2301EFC20B72F5C0E43
-:10271000EFC3B9B1EB41DE9DAC5EEBC2A97B59DEE4
-:102720004BE33DDAE6C9DAC8EBB3A371F4FD1B63F2
-:102730005E3B605EA3EC5F18F332D6EB64F5E2C15A
-:102740009B35903385A99124ED86E4C9158B471DEF
-:102750007F07D72B74FE4BCDF439AE51C5FC16A3C1
-:10276000BD315F7B7BFB7C13FBC0E79617D4EB206E
-:102770001940EFDFFFF3B81FBC82A2312C819EA667
-:10278000FCB912E099491AB04CE4DE2CB06F0C7A17
-:10279000DED6F14416EA0539968FF95DE7385E3BDF
-:1027A00009872B80DF4262C86CAF18CFD6213A8FE1
-:1027B000635CD5C5E58098724F30199E87FACFB516
-:1027C000F2FF4642989C8F2B28E72150A8D272FE38
-:1027D0002152BA9EF6570F49A1749C0A99C543A687
-:1027E0001FD27A24165795EA7C263CF2FD0623BEBA
-:1027F000DB4EEE21AA067E45491F5437F8F480339C
-:10280000F2A003F2F0821AE67B3A021181EDC7B121
-:10281000FDA1226E975C262D55C02E692461E5022C
-:10282000E0DB23126179788CAF5DC63E18E7631751
-:10283000E763CAC1589EC4BF3FCFE96B2FD8276852
-:102840004F303ADAC3ED93AAC1C1033EDAAEA8BF56
-:10285000BB12A6F32CD82B2EB04F42F8FD7B60AFF5
-:10286000D0F281B47FBFF2028A979DBA18025CEF62
-:102870006ED2193F34D5E3F74612F5AC06B9F4B081
-:10288000A8029C9D0FB7487E5ADEA50818BF78B8ED
-:10289000A901EBFB4F7BE2E06FEE52E202D8232767
-:1028A00043241405B8A97B04F39AC4E751F14E3FC1
-:1028B0006E973F11FBE8F7F7D37A5B667B709FCC8E
-:1028C000E0AF498D83EA95C0578F1FD35603FC3381
-:1028D000D6E8507F63A800F7299EA4F88275DAB97C
-:1028E000F5A3ADFDF4BB5FEE5C0D7EF0E4BC456886
-:1028F0000FF9957FBF1DCA7EF5E97FC5A7F2A36FCB
-:1029000082BE9E1C132DFBE77EE5E777C2F7CA81E6
-:1029100050552AED67CA91FEAE2BE8B33DB456047C
-:10292000124F4DFF23EE6BEC17D4AF77435CED46AF
-:1029300027D2AB7E546F0676749459F320330F4739
-:10294000206D818C3D48F14E00EFBA0CFDBEE7C80A
-:10295000473A0BFAB3AAFCB4FCC463C77E7A05FD00
-:102960007E60EB1A948BAE8765B4C726FFC75AF218
-:102970000D939C703D2627CD2B7DCFE1627CF4F03A
-:10298000E2EE291A234FE0BF298F572928270E5B33
-:10299000F31C8C7DE11E1279CF81F4CCEC135965C8
-:1029A000FBC8B0E705FB8964BBC8F8241CF198F3A9
-:1029B0009F8B1E12C3C9E2DCA71C32CEAB2D56552D
-:1029C00004EB209FB903F7C948B7757C633C3AFE16
-:1029D00029B37C935506571EA87EBA9E7DCEDF6430
-:1029E00001FCA71A0C3D15473D75B0448C8FA7F02C
-:1029F0003DF0A01883A4CC03D54C6F6D9259BEE076
-:102A0000265E7EEC348909F9093E9ACCF9EDB1874E
-:102A10004566CFC508EA3972FA0CDA175EFE3DBD8D
-:102A2000E43505F727A2BAB762266605F21F13BD83
-:102A3000501C5D14F558E4ACD8986E59FF3C6AB14F
-:102A400058F3A90B12F52590E34714A0DF93D46F38
-:102A500005FA9DC7F789AA8C3C4CE9F47498FF7677
-:102A600043CF1A7933B63CE9C71B9679205EF8A2AA
-:102A7000413FF50D3AFA3FAA0BC733F6098B6E0BAF
-:102A800047417F3A72ADF9D315B6FCE879B6F2F951
-:102A9000C6574A9DF638EAC62948079A1FE55521C8
-:102AA000C7F3E31753773E75789C65A85F1E4720F0
-:102AB000DD7E5CBF424E40F7DD25D5835FE07FA021
-:102AC00034CD9C5F70B993D9DD077FEB2260E7EFCF
-:102AD000AA52309E69E4753AF8B8B54E0DEBED7A1E
-:102AE000F00E05DA77060ADC80AF0373967B30FFC1
-:102AF00083E7A71A72B765CEF22B6F01799829A2E6
-:102B0000EE69CF6DC9867DF907AA14CC3FF5A70CF5
-:102B1000F41EA065EF93CED023F4FBAE8AF81273B7
-:102B2000DCE60E27D35FD73BF93ED0466BFE06E5C9
-:102B300083EB9D901FE66DC07D4B51E179BC36FF64
-:102B4000DEC0877FFFF562BE8F3D0B7CE08F32FADF
-:102B50008871FAD8C1FDD38741FEBB806E98FCDF37
-:102B6000C8FD537BBF13EBC3FB9D6087DDA6964278
-:102B700028CABEBE13BAACF6447ED42AE7C6DBE947
-:102B8000BE21DB523FA7BEC0F2DD17BAC0669FC4AC
-:102B9000995E236C7D3ADDDE0920B74BA9DE6576B0
-:102BA000862A86CDFB2A36BD5EEFD09B9CE761DF8F
-:102BB000F853C20DB03E767B7A035F9FAFCAFA3AF4
-:102BC000E70CF4DF36C093DAC73C5FDD6A7F0C8325
-:102BD000935038A78E0AE783E703E7D9F6D9ECFBD1
-:102BE0006BDF94C25B5FA1CFF254960FD9EE63FE08
-:102BF0007C3BC45169F9C79C0E9F764AD8FF5E3E64
-:102C0000DFF2145A3F097F1BF1D5E721F106EA8D67
-:102C10004D9E670916107ECF49FEFD7927DBCF2E2A
-:102C20001F3FFA38FB601CFADCE8D07FE434C5F1C2
-:102C3000DA9CFA7F9ACB7127DB7F1E5A179E476971
-:102C4000D8637738F43E73FDC4D32A378D7D904C1A
-:102C5000BE9E3EC2F8EFC525CBD64DA4FCECCCF50C
-:102C6000A2FD93B9A46DB5E887FCA37E15FC814C49
-:102C7000BE8F4F1633396AECABA7D758E5AAFDBC17
-:102C8000958BE7C5BBECE76CB87CB5D3E348F2F5B0
-:102C9000774EEBBEC650FC7A04BAB2C7AF1BE15701
-:102CA0006667723B389CBA68EAC8F4F872D3E0A64B
-:102CB000831313E557E0FC4C523A60FB89FEFD7F1D
-:102CC000AC595C06FB762C9ED6DF142F7F676242E0
-:102CD0007E85E7A6BD0871CF70551ACA9BDAE0A7BA
-:102CE0009B0E527FBC4EEF2B7FC734CF7E95423B6D
-:102CF00061143ED11D9F9BF9EB4981D14F3B1FEFE2
-:102D00007E8E4FBB1DDD29465DD0EF2764401792B4
-:102D1000F8B5E679B721DE06BC406723CD3BE46217
-:102D20007CE59FDD1082389DEB8C847CE01A6FD8A7
-:102D30002D21B45BA6BBD2D8B90F6F01EEE3513F92
-:102D40007DB00FD6C1CBF2FB0DFDF8B1114FE57A86
-:102D5000EFF63456DED0C4E2C7AE0317BFA9D17672
-:102D6000BEC30EE2A6EFD751B90E71C02E6AC7C31B
-:102D7000777FD90081387A2BAD1F31F9DDADA14ABB
-:102D800015EC84B6E25245A3DFA5A9655896F34B2E
-:102D9000D54A3AE605AE6FCFCF843878A18879B5A9
-:102DA000C5B4DC4C4DBA54978AF37BB9E81D2FD8D3
-:102DB00067A9E09CCF48ACA7A32CA24B141E475098
-:102DC000AD845C8C21BDCDE98CBE7F04E2254F0A29
-:102DD00091992E3AFF97F9F9AB4E6743D11AF07BE0
-:102DE000E4A80BE2078D0ADB87007A689B9E807B54
-:102DF0001EC7AF938F3BE407F1F5FC441E88426A7F
-:102E00006BA748EA93ADCF152E26E7DA545D1D95E2
-:102E10009E54F9734BFEF45CC64FCE00A5A724F177
-:102E200047BBBC26AE709D2B3391AF441756453E31
-:102E300025CCDE33CEF7BCE3D4AF75D1797CCBCBD8
-:102E4000E5586E3AD2297D5FE9F942729FC567F66F
-:102E5000CF2D7BB50AFC927E07C68BFC13C8BF84BE
-:102E60004DF2F6900B836EF4C9ECA4F5943E629398
-:102E7000595C8200DDA450450CFB907962EC917C9A
-:102E800080B7A77A02EDAF539E482DF3443F1579E2
-:102E9000CCFEDF54E9A937FB01EFA5B0FD97B5DE05
-:102EA0008A67010FC5DE5825BACF909D39869D9F50
-:102EB000023ABE502503820872304C98DE0C294C31
-:102EC000BF56A9705E4A201172266534FD683D57D1
-:102ED000F5941C6BF1003E022CDEE5DB2A6032A08B
-:102EE000D4ABC73DB44EA977519B8BE98B2218A771
-:102EF0006FA6877869FD4FFB9C681FF6FA7264C065
-:102F0000EB3E71D97720FE34F82B17E637F6FEE555
-:102F100002CCBFEFF55DB200E476AF400E51654FD5
-:102F20002A4EE5F064439202FB7CFEF93A817D8EE5
-:102F3000C1174908F2831DC19F97BF331D279E22E9
-:102F4000CEA6EDDCA4CB4DDB853EF77C3C8FD2D505
-:102F5000B3DED22D1791445CC588A754A444B603B0
-:102F60009CED637E5D0F7CD345E194D07ED58300DC
-:102F70007769A688F14792E98D4D8478D9A14015EB
-:102F8000E48F56C825981AEB9FCFD6FBA827F238B6
-:102F9000F453A5D655417CBDEC888672764170F518
-:102FA0004128CF7C8B95DB9D8C5F205E444C72B7B3
-:102FB000E2D4389C5F2FA793B6A0DEAF0BA3F28DAF
-:102FC000EDDC81355FCE4C0790E76EA28388C34C61
-:102FD00007B3291D4C35D3812E9C0F1DDC8BCAFAFB
-:102FE0008BF08FFE66959088DB0DE783D54A7AF1EA
-:102FF000707E31E0585F961E00396AF0853AEB1E0C
-:1030000094ABAE1B9D61F0D70D3E31F8E353B7038F
-:10301000F990F2C9551EFA5CECD52E4BC627E08715
-:1030200098F9E19A11F8A6960C1E0CD046B5328993
-:10303000A65251F2F2C5EF158E33F1811D6FB573B3
-:103040000572CC22CF58D9845775E87CA374EEF86A
-:103050007F4DD6DA03263EECA07E0818CB5D628851
-:10306000805E29F52EFB14E852AEF97E10FC4187F4
-:103070002B5C8F79B3B33E48B999D2E5A763440D71
-:1030800026DFAE2D7B06F9F9680A01FB64D3CCE597
-:1030900018F7FDF496C878D013EB28FE8FA15E8E4A
-:1030A0008D15310773602CDB6FD782EC1909B2F7ED
-:1030B000847F8FF1B2CEEB0D603DBACE16F9B8DE4B
-:1030C000CDF6BBD6BB99BE59E7EC5680DF06F315AB
-:1030D000D59CEF3C4F62766C89C2F79F4EB76A1061
-:1030E0001F2951989ED9D2D48BF6C7BAA6BDF8CC69
-:1030F000A88911C8A7F2144535D8F756FE3A5F7073
-:10310000001F5FC0F667E17DB3C9FECA51181CCA33
-:103110005FA508F0A7D212D5D24D7256118548325C
-:103120003B7AA39BC55F941682DF95FD0FE17E7607
-:10313000466148B809CA2DDD2404F1F3387B1F2805
-:10314000D485AF9BFA0DD4F45AF45C2D5D82D45231
-:10315000B49EF0BC4BBBE6C1FDAFDA40E51FE569AC
-:10316000C3E9087E8E99E8C180DFD8875DCBFDEF8B
-:10317000AA0205F9AFBDD1D903AAF92A85D9459F7D
-:10318000042A473D2F00FBAFD472433F179EB00F78
-:103190001B9DCCF661A10CFBB0F0847D5878C23E3B
-:1031A0002C7C877D58287FAF49C732ECC74219F67F
-:1031B00063A393D9FE2B9461FF159E7B9BEAF1F9E3
-:1031C000E3A606FCFE7C532396E7B9987F438AA2C8
-:1031D00041B097BBEE74EA9067D3C2D7EB805E90A4
-:1031E00011A2EBEA0EB03881FBF00378DED91D1492
-:1031F000316ED7117C807C8D3EBB66F8BA20EEA183
-:103200003CE3C5A75BDE42C01EDB2144EB4988904E
-:103210005BBA4AAA646A2714065757A6D3F2AAAE25
-:10322000596D907738496B0E2D531365CD57BAFC05
-:10323000FBA6F2F8E21ED913023CCF6903790070B5
-:10324000C0A6D9BD5D73AB9A0BA9DF54400D159094
-:103250006BF9CE18D0F3D761BD2602FCCCBEBB8A79
-:10326000B40621AE315E7396021FD2FA7146FFE7B3
-:1032700056BF45D1F0BDBDDD68F5C4B273AA47A401
-:1032800051FA83EFC228FDB49356B59FC2BE0164C4
-:1032900006D8476EB6CFDBE560FCDFE566CFB7DD6D
-:1032A0008C7F7FE8AEAC74D367A59BF177973B5CCE
-:1032B0000DE74D06A78A18DFE975D02EE0F04163CF
-:1032C000FEEB702EE88E9FC904F60F1EE27430717B
-:1032D000BC8FE9E9BB15D4D3978FFF6E5B3A2D4FB6
-:1032E0007C341402BDBB81843C4027D18D22E6A1F1
-:1032F0003C5D3621BD8E56BF70C673E9A07F3E553A
-:1033000098FC89717FA3B9FDE6F11097FAF4552670
-:10331000FF7672B9D3E3E86FC0F59CE1457B853A4F
-:103320000C688F340765CC1F12B3D8D3E950FF095E
-:10333000EA39A9C28F52789C7F99A560FCE3948BEF
-:10334000DF6FD18F768AD31D51D3E8FBEEA888FCBE
-:10335000DEAA7A6260576FF096E2B9D268B18CE764
-:103360004B3614B3F8698AEFBA18D827F7F7B9992A
-:103370007CF02A983F1A2BDE73A832004F51057E4D
-:103380008FE98BAA11EFAAA8621E2AFD0DBFD707ED
-:10339000F03CCA06C2D7A55EC4F374ED633EFFF9E4
-:1033A00045909773931AE2770E609E379A5C22ECF1
-:1033B000070DEE4F0178BE6ADC5730D09242EBB772
-:1033C0002D5343B00ED3D4CA6AC82368572BD1CF2C
-:1033D00049995AA5DC887268E83C06DE8BD1562CE8
-:1033E000631E117C07BE246DE4209C87CFE1B22CC4
-:1033F00025AD5400FBAABD06C37C705EC19257DEAA
-:10340000967E259E43926AD311CE76A22B503F5AC8
-:1034100023A3FECBF12A71B037728C782E1CB13009
-:10342000C51B326EB39ED3C8AA972DE7C2C746AC60
-:10343000E54C1E3FC8B49DE7F85831F6C7AC78B2EA
-:10344000CF3723F0481AC09B010779B5E1F3D912B1
-:1034500028AD8379E6A81E843BA8B65480FC1A4B9D
-:103460001A9A81EECE1B5E1B9CD38ADBFA61DDA724
-:103470006932D1E8F81791C116E87703A7F3AE7C5B
-:10348000AB3E7E48910C7EBC10F8717CA348A2A68E
-:10349000F1210E19358D37A12BDD529ED89D6DA9D6
-:1034A0003F796B81E5FB94D80596EF17EE2CB59428
-:1034B000A7F6CEB1D4BF686FA5A55C12BFD2527F6C
-:1034C000FAA14596F28CFE7FB2D49F757499E5FB04
-:1034D000C503CB2DDF2F796F8DA57CE9E05D96FAD2
-:1034E00086BD6ED78B13B9DD72BE76BA0BEE89B08E
-:1034F000C465AD7E80DD8E57FEDAAAB5805CF33BF5
-:1035000091BE65D0E3B4BCE64EE64729E5210DE463
-:103510004A0E97A3D93EBDD40DFBA97E05F581ECDB
-:1035200065F564EF02B43FC66DA5F2683A589B6436
-:10353000E87B0AC8E5A66879A129DEE456BBF16CF0
-:103540005685BF1AF7378CF6B2AA93880FC6D3D820
-:10355000F96AEAA5423DB746DB9BE6B54F14F10890
-:10356000F420F5F71E31F97B23F977767FEE5CFDC9
-:10357000B77122F1E0B90221DC00CFE286572B219E
-:103580001D98FA75D701FD6E7286EB7B68BF9B0AAA
-:103590003C6C1F94FB755DF9BDC81783F932EA17BF
-:1035A000226BC5E6785C33D74329CAD3E85752BCAF
-:1035B000A3BC35F0BE411888B582DCB9D383F27064
-:1035C000DC7FBB5E03FE520A941C85BE0F1D70EAB1
-:1035D000B0BFB485E3B5402DA984905261B06E3F71
-:1035E0003C2769D4CEA0CFA2A2CDFBE179BB9BE55D
-:1035F000035F10FA7E25C812A59CD97FF23467AC10
-:1036000085F623A9148E247E85F194FC5BD9FE45B2
-:10361000A1FC2ED01B58F567E8142AD215CCF77000
-:10362000031D08F844FA7107BCA837DC70B815CA46
-:10363000B21083FD3FB04F611FAE227D2BAEBB6148
-:10364000B7823D1B617E6E33D057A0C6BADE29CA51
-:10365000F7104F6D028B7B77A569872BE9B85D99D1
-:1036600005E9106385B8489D49DEACE7FAF49F3D53
-:1036700022CF7363F2E6CFD0E78C84BD43E97FAB02
-:103680003801E0EB2620B7DCF77413A077B74A5770
-:1036900013EDFAA816467DCAECDDDB394C55054B17
-:1036A000707FFFE34029DAB7EEC67D49F1E71E904F
-:1036B000883E7D64BCFA276D437D4F0A9C1AD8155D
-:1036C0008D9A53EF49220FA6703F64DD38E33C2BFF
-:1036D000CBEFE9E2F830E2A14371461E4F33E28CB2
-:1036E000463FB767968E1DCD1E7753FF32628277B5
-:1036F0001D1D07F0D27EBAAE1AF12013761EF72FE9
-:10370000C53DEB719F95F9495338BE4B387EC7399B
-:1037100009FA09F3216E92015EED55D5C097469CDA
-:10372000E537606CD17AA12891585CCD61E82DF124
-:10373000CC4508B3E634F2C3D0E4657A8DFEDB07EE
-:10374000E7C6267459CF654EECB696276FB596A797
-:10375000C4AC656A351F01BB006C348C5BECB47E75
-:10376000AF33F603AAD83932858E7C86E95FCBBDAC
-:103770003884EB7F238F2DAF375E01E23577AD556F
-:10378000AF66733D9F6DD39FA53E09E30915870280
-:1037900007C17E34E23E473D9A259FCC88DFD8E5BD
-:1037A000B9E7ADCD847E41BF3CE262710C880F7FEA
-:1037B00096C7E325B93C5E328EC74BF258BCC42194
-:1037C00069AF2C1530FFF3B81B8D97868B589C86FC
-:1037D0009DE7FAA85A7E51D0D87811D378DF2C8A89
-:1037E0005ECED010CB827A46DCC4880BB87D7A25B9
-:1037F000F0EF86D06B0D07289D54FECA45A09FCBE5
-:10380000A4C3879A40BEE5C998B7ADCEBAED3B1EBA
-:103810008843C2775AAECCD7C6221FFCD481F1812F
-:103820004E4ED7C6394423CE92E2617691CB63D80F
-:1038300047510FCFCBF780BD7BE14E2AA32DFA8EE7
-:10384000C5F38CB8DDD45EEBF75E2264A8B0EFBFA1
-:10385000242632FB4AF75698F21A2FE0EB366D69B0
-:10386000FC81A5B4BC9BC44AE1BEB9124E1FA18322
-:10387000D6F3AF638880E79FC61C9142315A7FDA46
-:10388000F3D6EFC5B6F3B117D8CFCBDAF6857C12F5
-:103890003971231D6FA3D620801CDDB894DAF2B4F1
-:1038A0005CE8E1FB4593C824A0C3CB246F280EF845
-:1038B0007D43C2FD2DD7DB93DFBC11F4FAAB2CEFB7
-:1038C000489DA06D8638B2FA7309F5949A424A4A27
-:1038D000BC897DA47F3B1322B02F62C4B59EA2EBAE
-:1038E0000A7A6537F5CB0B1DE067AB58EEA57E393C
-:1038F000949FA57E393CF750BF1CDEFF90FAE5503F
-:10390000DE4BFD7278FE98FAE5F0FE79EA9743798E
-:10391000ADB7A212E262FDB43ED08BA7648F3281B4
-:10392000C2DBA93854A00FBB1CAAA8B85D594C49EA
-:10393000EA2B9D4FE3FE45E5652C4FBA72FDD3B8E7
-:103940007F618EAF99E38F89F8DA8060C4D720E475
-:10395000F93BBECF3014678BB038DBD9FBD18D7EFD
-:1039600030AE39AC1F1EDFFCF0CE5F3FD14A3FAD19
-:1039700098F14097A700CE6D34F0789E9117A35927
-:10398000F2EE57EC69C6BC1867D6910658D73D656C
-:103990005ECC17713A222AC85BBB3F67F871767B11
-:1039A000DA78DAF59B8FDB1546DC749383609E74BE
-:1039B00054A0F604D8174DB1F2771C23C7535FF714
-:1039C000F0F34336B930743E80C77D5C60CDD27968
-:1039D0003A058E0F9EB78EA2B180C5F5CC71554FBA
-:1039E000610C0FA57BBC3ADA7502B5F7D0FE532304
-:1039F0004188A375C0798024F38B7998FE6BCE72D1
-:103A0000A2BDD191C5F240AA72434168DF9A353315
-:103A1000683E1F609C5F38E89BA90C98FA5BE32B1B
-:103A20001855FF49545F6BA3E86BC9C5CEEFB4EEE0
-:103A3000BF588173195DDE65FDE047770503187F88
-:103A4000EFCB9A49064CFD4BC1D9787E43F2327BCD
-:103A5000580A2A680FCB30FFE2447DA3DE3D1E46A4
-:103A600027949D31BEE8F676633D971CC67B235CA8
-:103A7000015099F4A9B2FD384FA1481493BC30C647
-:103A8000FD570F93975DC51115E22C5D4159837366
-:103A9000205D5A29E2B995E3B935CFB0274268C70E
-:103AA000ECE17836FA69E57180D67A27DA73E1C6F7
-:103AB00034B52A03F37577C1BE5697B745817D4962
-:103AC0006756D9A8FDFE84CBEB91FB2D1953351D0C
-:103AD000FBDD03FD3A7DCB54E8D731C2B9A3C31C4B
-:103AE000CE2F6AB7DAF7F128B441733E8AFDE9E3D5
-:103AF000F6A7BDDD8AE20127ACFBBAC7ACE7941D8F
-:103B0000849DDB5AB97735F2F926B91FEDA84DA788
-:103B100085A4E7BF325204CE6F43FEBDC50ECAE195
-:103B2000FC94C3BF03A981BE28895BED96E987ACED
-:103B3000E519FDD6F2ACA3763B487F03ECA0C55C4B
-:103B4000EEF55379CF92610665C047381AAB00B8DD
-:103B5000EB486F33E44938789C7C31D77F0BB97ED2
-:103B600074A7B0786F4EBDC7E27F127ECF5F2EEF95
-:103B70003FAFEAE0EA3610B261C3AED2D06FCDBB40
-:103B8000E2D90A149736FBAA4EB79EE35F68B39F4B
-:103B9000EC765685DC83F9B8D9B6B886B19F0BF3BD
-:103BA00084FB0CECE39FEFB8467F908705F2CDB81D
-:103BB000E705EF15A6EDF3E4B810A278CA6E60E74A
-:103BC0007072D612BD27091DCF49617C310C6FD1AF
-:103BD0007988B7F9FC5DB697DDCF955D25C5343A98
-:103BE0007E767D2FDA038B6EA3F3413BFC0CE6C19E
-:103BF00018F5D3D37AF13CD2B61A81E7E712B46B49
-:103C00008C75DEE665E707EB2E156222B46F28C0DF
-:103C1000F111AE82C4FA523C1D637862F986D75422
-:103C20005BCF39D6D9EC17831E16DADEFFD6C3F682
-:103C3000C50D3EF8F0E2A393C651385608DDD529EC
-:103C400013CE5D5F9AF8C37106F8107E1FC3525FF2
-:103C5000308F57F9818AE73DD206B6134A92B529CB
-:103C6000245A3517E4CFE085022D5F9BF2BDF6AEF6
-:103C70004BE1F8F6E0D360E4B95C3FB8AC3A2F51C1
-:103C8000F6787E82E5001F07B616D97A9BEE7DA1F5
-:103C9000A8DBCEF3E337E864B304B9B5A2BA39942C
-:103CA0009F68970EED8451DA85C96639493BAFD1DB
-:103CB0008EA2AB03EE75E2F3F2F0EF2287C73CBEB3
-:103CC0000C7853352F9E635C20AB9097F165E1181B
-:103CD00073B67947C866C784E1ED28D8CD06FC6283
-:103CE00072F863F0DD3CBE6314F8FFD6F8385B7FF2
-:103CF0004EFEFDBCE1A3D55BC68C3C5F80CB81F75B
-:103D00000D695ED1D4CFFD7D7FC2B8B87C3D09413D
-:103D1000C84B76E82AECE715AB0FA27F2FA755A971
-:103D20006007ACA365B003D6F57663FCBBB8F08141
-:103D30002E20FAE2B887803C984AD4B4DDB4DFA9DB
-:103D4000AA0C27AB887CE94111E2E9E46A82792375
-:103D5000A97D1E763F50FE9C47C1DF4A4B53703F02
-:103D600023256DE6A3CCE865716603FE948A23954E
-:103D7000107F97EB484800B88418A900269B427032
-:103D80007FC3A3EFF9269C032032D34F78470EE878
-:103D9000551E6F1FCB48867439D53ACC5FF9998C84
-:103DA00071ACB170051825CAE2E2F4CD004F718400
-:103DB000762000FC2C5E36352286E2B4FFD213ACAE
-:103DC0001DF9053B3F427D9325CF79137835E4CA31
-:103DD000581E870F2EB5C6A9C9209D336D5FFA8B7B
-:103DE000458F439C62CC30F9CDFC760F8733F504C8
-:103DF0000943FF811AABDEF0F0FC6D8FEDFE988B6E
-:103E00007C0EEBBDCF76FFE1DE30EA011709294ECB
-:103E1000B42F96A2DD60F825DBA022D8E37984DDFB
-:103E2000B76B6F3F93B52741E6A7B83C44514AE9C9
-:103E3000F7E51E1DF30D5DB44CF12838899245DF7E
-:103E4000678B2CDED22C1019CA89F1E29867E052F8
-:103E5000AE6A03FB65BF321DEF4533FCEA5635847D
-:103E60007910A4A8D262371BF95E6B4A0AC6C2F762
-:103E7000D43143712715E8724D6621DAD1FE8C8169
-:103E80007F0639FB598A6F81027215F230E6C0B5A0
-:103E9000B4AE8E2895BBAE53394433D9672EB901E1
-:103EA000E36CAE53E32CEFE34DD673D4BA57AC8238
-:103EB00071B2BD1A3BBF43D436685741ACE7A55D2C
-:103EC000A7B22CF67AA2FF5CCBFB38B56BCCF7FB24
-:103ED0008CDC7F0AD18ACCFD4F18A1FF49B6FED5F4
-:103EE000A4FD27FACDB0F4DB2EB3F86B34E0497AA9
-:103EF000DF64A9B772BC77C6C8FB03255E16D7EC92
-:103F00000C36E0FE4025A18C4FE965DEE963123BEB
-:103F1000C74BD07E23B9D6FD814A4EC722A50C3CA3
-:103F200017205BEF2D2E27F67B8CAD76D111086E16
-:103F3000517A177D65FDB84FF0272F9EF31BC96E90
-:103F4000EE6F22189F2E4F19B81DF6C1AFF48E7375
-:103F5000B607319F19FDF925DEE90BF8BD9F2CAF9F
-:103F60003920225EC29563F19C96D14FD8492682B2
-:103F70005C0C8B2C0F027FE8F8FD99D98FAC4F8237
-:103F80003FFB39F73A5D282F34CDAB1FF20ACDE362
-:103F9000CDCFE9914CF308BBC80C1C8FDBBB43E3CE
-:103FA0008DF962E3BDCAE359C678750BACF3AB7308
-:103FB000AA38BF3ACEC7C678AFC2FC92E0F7ACE3EE
-:103FC000F1BCC9A1F12EB7CEAFCEA5E2FCEAF83D17
-:103FD000BB43E38DF962E319719D4E674303D0E162
-:103FE00048F11D23AE734DE72E4B5C874477CDAF70
-:103FF000282464B3C0E4C7F68DF33AC0FFFBB8666B
-:104000004D11EA156E5FE37DAA541F2F9419BCB5BC
-:10401000B9DE58B3098FDBA81CD127C3390985C085
-:1040200081323837A1E3398A203E1FA1F6BA8EF9D2
-:104030002545F8FD89A610967736CDC6A7D14FD174
-:104040006C76EFD794B94252BBFD752FB3DB37675F
-:10405000A9D77F1DF45B8587E5FBCEBE84E8263BB0
-:104060009A1AD6FBDDB03F741D29011D39692B83D7
-:104070003B50352606EBEF2939D8DF047150D9A122
-:1040800061BEAB96FCEF18BCEC65FEBCCBC5DA9309
-:104090004BD8FDA7B55C3F11A906F38F6A17A6613F
-:1040A0003EC2A2C5BA4FA5785B2C086F14727D077B
-:1040B000E79EAEE54B6DF71702A079E87A05742903
-:1040C00006F7C35D9B7B788940FB0DFBAE413F2328
-:1040D0004C1BA6D37EAEE5FAB6E26D17817804B923
-:1040E000CC89F26BF162AB5FB0D91D57C1CED95C00
-:1040F0001220CDB4DDA21AEB77978BF155D876FF5D
-:104100004BED59EE8331F26DEDF8B1C74D0F79F9F2
-:1041100079251E1F3D498AEFC7335F3C2FD7DEDE6E
-:1041200088833679997CEB7432F9309C0F183CEF18
-:104130007139B8ADE928C6D10CF8B2E59800F23E65
-:10414000A7FEA825EF9D22168D6A639F8048BB4B72
-:10415000500FDBE6B34DD89D35DA7D50D9447E77DC
-:10416000A088FFDD0261F8BCFFE0B5C6854F92B9BB
-:10417000AF149264FCC3E2C1B587A450B396C08B60
-:104180008187FF6B3EDA0278A7CF57E67F52C6FCE5
-:10419000C05CCBDF0730CE6F5D335496896CA2E7ED
-:1041A00085CB9D3AF357078B812E8F5C9A12627FE5
-:1041B000E782DB41F15F8960077DF9FEF53C4B5EEC
-:1041C00033EF77A4F5B2E7539ACE1B27EE3F80FC7E
-:1041D00097E65010ED814C91003F65433E9E9F7DD8
-:1041E0003F66B55B2DF978AD7DBB04881B6E87FCFF
-:1041F00044D339BB9CFA5EA11DECBBE6188B43C4CB
-:10420000693D0A776E7D5C682B4EE47DD9E57AEED8
-:104210006DD67CC1F6B98BD5DD1AE4D55476C3C50D
-:104220005FEBB6B23897517F28DEC5CF9F3A48037F
-:1042300081F3179297C59B83FC5E8EB3E5EF7E26D4
-:1042400046D5FC7CC8DB8D291574FE0F65442A7C9D
-:10425000B4DFAE4069430FD0A71CC23CEFA58D77F9
-:1042600087214EA866248F832FE5F6418D8FC5D315
-:10427000DE72C4F3206EFE8B8CCA1ADF8C24F51B11
-:10428000EFC5FECA47B86FFE261FA3CFED62727955
-:1042900070031FE72B2B44BC47C84D7C783ED55D8F
-:1042A000D83D1BF0B17DE5B650B27396D3D5C85753
-:1042B0007DA638ABBB90DD034048EFC530CF757F9E
-:1042C0007EB8F7193AEFF43F7B51CEA64BAC5F5363
-:1042D000FB9BCCF331DAEFFBD32FF1FCFC3E7EAF3E
-:1042E0003A89165C0E71F64D4619B600A09C3654FC
-:1042F000BE1CFCCA44F9C70BE0EF266D021AA5C428
-:10430000F7DEA6C3A887370984EBE95F2CC0FEF867
-:104310003DEE2FF2EFE5577EF0E8FDA00F663AD1B3
-:10432000DFDCC4ED1D03BEF77DEC9CC2FB1C5F23EC
-:10433000E1B393E3DB0BF80C9C173E3B93E1634145
-:1043400040EF023CBB21138482E0FEB3B216F2AD13
-:104350001F6A22E1AFD3396C0FEDD905678A68FB7C
-:10436000FB93ADC70F33F46E1FC2730CE7E72BF45A
-:10437000860015EB6611EC27091C5B475BD7A96922
-:104380004CCEC11D63F04CE7F6A5E4EA0F42FE8275
-:104390005AF66FB7AB54CE74E4F72F4916277EC296
-:1043A000CFECFEB411E2E22F70FC55A5877702DC5A
-:1043B0006DEA03E8EF39051286FAEB660F10C1D4F7
-:1043C000EE2D3F5B0F0A772FC0EDBC98DD4FEDA3BC
-:1043D000788704395F19837F9D768440FEBB2F78F0
-:1043E00004F35A7D6503C8EF280AB3195D813FA81D
-:1043F00070FBED854D6F2F00BA48970C3ABCBD138A
-:10440000E84C4A9491EE7AD259FB63F7DDDE09FE5F
-:10441000E20E276D037230DB89F68D7D7E8738BC16
-:1044200082AA1F80F90DC3A76BE051B86F60D34417
-:10443000764F4BB9D8BFE46B4097577AD13EA3EF84
-:104440009798CFDB9FE4F83AE963F6D5A63F29F8C1
-:10445000DDBE1E23D1EB6FBF38BDFE76047AFD9D15
-:104460008D5E3F21C9E9F57F46A0D777E1BD1D2FBD
-:10447000F6B244F4ADB0AF2C7FBE6027F4275F35B1
-:1044800077EB33F4297DBE318AAB19122CE79913EF
-:10449000F23EF209F46FDC2B60FC7DA2BB7C23F4BE
-:1044A0003B6BE6569063E7D0EF19C087BDDF5FF046
-:1044B0007ECBAFF44692DD93B0CBCFF2E37FE067E3
-:1044C000F546E29B5FF9597ECA487C13F70FF14D20
-:1044D000AA3FF3EC7C33C8EBD37518EB9F712E7CAD
-:1044E000F3203EDD858C6F70FE7386F30D2111E4A1
-:1044F000938E7CC61745FE159DD15C131F917BAD35
-:104500007C44EEB5F0D1A7FE7B918FECEDFD23DC72
-:104510000778D110FF87A7C13CF40BD536763E69EA
-:1045200000CFE1F690C13E17E609B3BC5C4F34AA58
-:1045300033F3A09FC0BDB3B378FB1DE0A3811F344C
-:1045400093C7B3E47EB2C8379C9F7D65F132F3FD1B
-:104550002E2FF3F6AED47039E0BD870C4C01FB6C06
-:10456000A4759ACFEB9F4ED7E7FB93D0F9D9F450BF
-:10457000BD9FE9A17ADE4FFA9F9506B04FEDFC5E34
-:10458000BEF2C77F7C62947E6EE2EBFF55DECF17F2
-:10459000E0FFAFFA93F02FE5FF1B601D4CFC5F2698
-:1045A0001424E5FF9BFC49E407E5FF9BFD7F5B7E50
-:1045B0005FE34FC2975701BF659E1DDFCF717C3F00
-:1045C000F725F1BD85E37B83FF0BCBDB0DC9F04500
-:1045D000F1BDF11CF1BD65047C3FE8C7F57F16E134
-:1045E000F7695E8C9777CD227BA09F24703C6CEEA0
-:1045F00047D1583F94A73E1128DD977FDE154A76B4
-:10460000FF116DF768B276F3FDAA917CBE1AFC87A4
-:10461000ED5779715F81EAC72793F1C797A0831F90
-:10462000F893C8FD7291C921C77D1777421CEF4BE3
-:10463000F4FF9364FDDFC9E5FAD9EC82D7385DD089
-:1046400079FF977FC670F9D7C3CF270B6AE4177E2F
-:104650008CDB0F5C01F26AC75DE902C4BB72F5B87E
-:10466000007E025EEA43E1980B97F8CC48B4DB2168
-:10467000C705B83F6747832AC07929537F6FFA334C
-:1046800047EECF0E0785EFD77E9477FA6FE0399F1C
-:10469000CFEF7CEDA47DE9FAEFFD4C6EFF0F3CF50A
-:1046A000C956B96DCC430C77B33CDBD9C9FF7EE565
-:1046B000019FCCF558F8B859FEBF3B4457ACBFF347
-:1046C000D53F14BECF387C7FC27E6DF0D9F17236F3
-:1046D0003827819E67FD49A999C3F594BD3FC3CF93
-:1046E00036D609AEC530C77DD4D421FD9D0AFD79EB
-:1046F000DB453C4755CBE549EDEC346EB7AB1EE8E6
-:104700007F3B8FC36FBFED810AD857EFB9472D01AB
-:104710001464D733BDA7DD360EE3ABD9BC5F3BFCD9
-:1047200043ED9DBD53E0EF42D071C7C1B8F3E692AF
-:1047300038F88DA9603760BC42C5BF5F9CEEEA0EB9
-:10474000427C769DD0BD6419E8D52BBCEC5C4C70E6
-:10475000F159EEC56CB1D02D09969DA57E33D65783
-:1047600053BAF1FE9473AEEFEA4E6A67CD4B150D66
-:104770007F62CEA8780D0630EE65E077F8386CFDE4
-:104780002AC20D02E0DB5726A8907AE7A37402F64E
-:104790009258D88F79535797317A21D42F19FDFE2B
-:1047A000950E03AEABFF167019F5461E8FD7B39D5D
-:1047B000B718FA3B635E26C7B0222D7F742823E921
-:1047C000BE82F1EC6C5275B80AF92355C37B193BD4
-:1047D00087F2BE43C145BEBF7FBDC4BC626CDFC9AA
-:1047E000567FE8FE91A082F61FFEFD0E131D75A4F4
-:1047F00032BF554A0BDF9D8AF23784F73FD2F2B7BA
-:10480000B0ACD0B20FCB4DB03E441D2A37E3F720F9
-:10481000AB4F54F59CF04EDB75613B79A89FF5D802
-:10482000AF7768DC8D580E0C95EFC3FAB9ACFEB9C2
-:104830008E33ECFE957E09E7FF89ACA7C2BEE97511
-:104840008D5FC3F8D2F58DB7E0B3AB49AD80389D2D
-:10485000710FC975D77F4D057FFAFA9BB6E0BEBED2
-:10486000D1FF42F03B80FF35B91AEC2567BE187EB8
-:10487000CC9BE0BF041C6D58AE95D97DFE0B679FA5
-:10488000D8D4668ADF29F077D121BF4633DD834152
-:1048900012F2F04941DF9D7A1EF43C7C9E841CA4F8
-:1048A000F4FB89B73016457AAE5493F18D31DF9120
-:1048B000FA37E63B92BC31F066BC5F57C8FF8EAE5C
-:1048C0002D7EE99E5885F93F0B050EA78FDF0BC99A
-:1048D000EBD5D2719E2D46BAD0806E6BB97F67D76B
-:1048E0000FC6B84F0A91D7013F1027BEA774387E74
-:1048F000CF156F46FF63235102F772798A09EE8B59
-:10490000057CC6BE3A936B0F7A8D7214934BC285A9
-:10491000DD28E7DC9A21F7989E54537A75B184FA22
-:1049200041A97FBD3C3805F2402341F8133EB4FC59
-:1049300012DCCF9C2EB132217F7DE920DA3FEA05DF
-:104940007093A3227FFED2A13CC28E2E62DCE6F3DE
-:1049500097209ED733542671385FD0E3192AEB4A4B
-:1049600090960B86CA5128EFE076DFE9D4CF5F6AD4
-:10497000437D16FE0CF8C790AB155CAEFEADE4E9C6
-:10498000FF02CED174B20080000000001F8B08002F
-:1049900000000000000BE57D0B7854D5B5F03E73A8
-:1049A000E695642699BC27BC721240A23C9C040286
-:1049B00041B14E78355E790CF51524C824E1119E7D
-:1049C00001A432ADB60C24202868AC2FEA833B2822
-:1049D000F66AAFF682C55BFE16F907410B2D62AC95
-:1049E000A8F840C3A3151F2511B44CAD2D77ADB564
-:1049F000F7CE9C733203C1B6FFDFFFFBC3D72EF7A0
-:104A000039FBECC75A6BAFB5F65A6BEF612CCC583B
-:104A10002E639BB566CFE8618C85BD565F7F8DB1F7
-:104A2000750CFE0A183B877F5733D6D76367AC9C5B
-:104A3000B1473283291EA83FE98E0EAB13EA398BAA
-:104A400072DC41176385DE2FC295F07DE128C63404
-:104A5000FCB65F166323A15DEF32C59E037010F3B1
-:104A6000288CDEADF240FD1C3763AD009935C2D80D
-:104A700020C61E70C9328C0760A024C2DAE079AA71
-:104A8000C6DF5BB00CCF55075BBC15CA6925CC1FD0
-:104A900081B2C7C1660400F6F258681E033DAA80C1
-:104AA0000A8D37C3DBCC34A8EFACB2F82300331047
-:104AB000BAE2F362AC99EA0DF4580932818FF13908
-:104AC000C1011E286F66AC6A2B8E8B450325308F83
-:104AD000D44B73B2EE825265897519832EFF7D0522
-:104AE0000BCCB43136D413B0637D57694E6A701065
-:104AF00095875079B525CC002F95CC1D518AE27849
-:104B00008191A706DCF171C4C7C3FB7F6B453030D0
-:104B1000D6D6F5BD84374E5503FA79485889788042
-:104B20007E4F55FFFE219CCE4267879D15033DFBBE
-:104B3000DD17602ACE47A3F7CEED53A23DE1FDA2DB
-:104B40001D4B188E77555AFA28A4A3B9DFB7BE7E3D
-:104B5000D81380F7297F7604B626E86F0EE219C6CF
-:104B60007B6845357D07CD6BD63CC666E0548A1917
-:104B700011B4CD899029E71C34BD43FDE0FD2D8C97
-:104B800033C3F581DA890CF05A57AD32B508BFEB63
-:104B9000ACCFCE41F996B6DA096C081442B613F8D8
-:104BA000DC09FFCE41BB419639DE038F6BC3FC3974
-:104BB000D587FFCD62BEF1B9F05DFD5AD3F3F7AFF3
-:104BC000F998A5E37BEB89B69278FB3755D706C6F3
-:104BD0008A7A67E8FF23849FEB35E647BA5DEF4B9F
-:104BE0008B84618A3704A606C696C4DB7BFBAFEADA
-:104BF0000CC48B191FDB05DF1D5A11088CEDDF1566
-:104C00001F7501C5EED12E8C97EEE2A1D65A3A3E21
-:104C100057EB8A07F3FC01631B10CFB300CF771566
-:104C200025C707D4237ABC3D15EAC154C6AB136C23
-:104C300016C043FD14853914C26F3AEB8BF5FC1393
-:104C4000C6E9C66BC6A3195FF52F325F14DAAD7FD4
-:104C5000D0ED030E67BF93F88902D286833CE155FD
-:104C6000F5F33C86E3F7C03F9CE7772A4A5FCE81A5
-:104C700071049B151FE3F33DA69F5F1D0B64441554
-:104C80009AF7B124743FA69FA7797CE6F1A7A0B05C
-:104C900002F9177ABFE89EBDBA7ACC1A1D1418CC57
-:104CA000D8331E77CE1FD2A03C84F9CEC1BAFA9277
-:104CB0008DCA188AEFFBE5D0FA36F3C5D915DA3D6F
-:104CC0007B6DFA75CEF96C46684A67BFD8BEC28262
-:104CD0009D650FE0393055DD7003FCF75BFBB25783
-:104CE000E3B3A55E553B918DF882F912BDFC8C496A
-:104CF000FE6208C3BB55C0DF14E6D45CD0CED5201D
-:104D0000A4CEC15C26F95334976E1EA75B942A94F7
-:104D1000A340BC8CEB07C7E76B1EF752AF9DFA03AD
-:104D20007EFC42CF8F66BCBC55DD3703E5C88138B9
-:104D30005E865C0C5E46E3620639E2C9665105E8B0
-:104D4000DCA138234FC0986A42B707C60E45BCB0F5
-:104D5000B01D44E7514F11D593F3B631F9B798A17F
-:104D60003CADB1B320CEEB7D1BABDEE64218ED5D72
-:104D7000A6935B27B22B8FA25C96E59AD00FA97DF4
-:104D80006044E243C9CFB7385D5195F3E1679D7C3C
-:104D900043F2ACC6F387814427760EE6A9662CD091
-:104DA00070DE6A5AFA1096C1D85AAC02F354330333
-:104DB0007F443DA9A6F58920FFA54E7D722DA7E36E
-:104DC000FD5537EAE89832EBE7616A5CCB32E03FA9
-:104DD0004DD0AF52D02FA5C469A61FC3751A2E613E
-:104DE00091A7148102289FEEE78FE0BA4DA63724E1
-:104DF0003D534AAC5FB5E9F99AB5103F4A3AB2BDA6
-:104E0000C33A70BD06BD567617BD2F21FC043D1276
-:104E10003F1D36D4273342B6D3FA76820533232B8F
-:104E2000F1BB750E1F3EABB36879580FF0E4413DFE
-:104E3000CE4A7C3E5C3F2C0CDF497E42BCA231A1B5
-:104E40006BBF0DE6505086ED81F4C4EFD6EAFA2927
-:104E5000EEDA6FE7BA32B76BFA4E55C17E203BC22D
-:104E6000E7F3E9E4779F4C6E3F9CF60EDB6A294E30
-:104E70008EBF3A67B6DF9A1D2F1F2B70564712E878
-:104E800001D99ED4E7596AD06BC1B9B127F7ED1D9E
-:104E9000857AD87319483276F7EAC7F7EDEBCD90EB
-:104EA0004518EB81D51FDFE77791DDC1CBC898307E
-:104EB000FECDA99D65BFD30BE5E2CE7218CB9BA0BA
-:104EC0003B7605C8EBFB1EDFD70CDF9F3DE220FDE4
-:104ED00075BA2A35828B273B34861D87715BC1CC1E
-:104EE000C90056031046E80CF5A4F92856C01CE08A
-:104EF0003B5BF32988EFC9991AF183556351370C4D
-:104F00002EDBEA53105F3FB2B30621372E9DA2B3CA
-:104F10005F266772BB43F6E370B2704A59BC5DC648
-:104F20007C2B518F582730D22BB0CEC96E93EB5BC0
-:104F3000B6332D93EBCFCEF579E1F53C2D33C17A25
-:104F40003E6059FCE10FD09EFD8DCA9E82A94CF7B0
-:104F50007E8F9EDF18AA2738353497E0AC4C6EBFA1
-:104F6000FC9E056765026CAD7E63FA72E0DFC6EDFC
-:104F70000E1FAAE585B77D7C4FB9867802BAE37724
-:104F8000B3EA1F2C87F7F6FE16B267D7F666D5C8C8
-:104F90004FF6950AD947EB347BD576800F6454DE03
-:104FA0008FEDC9713D903196CAAC4AB3209F2F75E1
-:104FB000723E3F7BE44E6F1DDA952E17AD17FBCA8C
-:104FC000A27B2D5066FB61DC0CE507233B4375702B
-:104FD000B83A93DBA9AB05BE7F20F8CC1943227306
-:104FE000BE5E0CFD3BAD618676B63366A5E7760501
-:104FF000C697804F657BCE182CD2A1D89FF97B3BFA
-:105000003DC779E1F76A3633D83DF7E0F7B908E5EF
-:1050100038D2F838B2CDEDA4F3E762FD99C771D26A
-:1050200033E647889F0732FCF767921DDE664379B7
-:105030007E8BEB37879521DD91C76D0ACAE3495F07
-:105040002BD142C05F4AA51A5955847ACD337118C5
-:10505000F001ABB4F9109FADFD72DCC5BAFE9F1232
-:10506000F47FDDEA71E33803E3C0AE26FE66B9D70C
-:10507000633BE3EA8773F90706974ECFBEAE6D59DF
-:105080005B8CF2376CA3FDD20C673882E3D3D96D09
-:10509000CA392E9735EBF0B8FD3763ACEA4F49EFCC
-:1050A0006ADFC136642FD97F529687A10CDF7D203D
-:1050B0008A1F8E3D73034EA38D79ECC57A7B1077E2
-:1050C0004BC3D1BEE17F334246BBCF6C17D655945C
-:1050D000BE026400BC44AA86219F5D6A213EEBAEFD
-:1050E000BDCCD87D9CCEE39A3CB8AF7A04E504EE03
-:1050F00007C71E1F4B72034C2B6C77F258D51385D4
-:10510000DAEB4316E687811FF4AB1105E676B0A40F
-:105110006DFFD588B70A9B467AAB846DB82E07DF42
-:105120000FF5209E03C20E81FA5CBF799D91FEF0BF
-:10513000ACD57FDC55AFE3BB8315C72FC5FD0AC8CF
-:10514000BD8644FCC4D84AE2EBBDDF4FA5763E7C69
-:1051500040893860FCE3D4AF5F1D81F6EC0F6C3EF4
-:105160008746D3B2205D27F898D8B8FA5DE3747605
-:10517000C07116184E7665E9914A07DAAFAB155A39
-:10518000A712FF3342467B33B818EC32ADAB7D0A31
-:105190008DD9919FBB6B9F9AEDABB399C2AE2A6339
-:1051A000657ABB2A999E92769595F9FF467287B5E6
-:1051B0005951EF4E820789E4C04D195CEE8E533F82
-:1051C00023FA9CAE5035C4D7C1D0272EDC8F1FFCEC
-:1051D0005AE5FB607FAEC18ECBC9E27E814D763051
-:1051E000C8E0BB4D3D9C9195D0D4EEEF5F96DF4675
-:1051F000F4D11E1E8574FC8D8DE470B2F1BA432A81
-:10520000EB078C3931A41094F42B0CA530AB4E3F36
-:1052100014B2C4E3EF9FC5C79F7B07B368D06F6626
-:1052200098F913ED8F653DD8178FB732AA1FCD843B
-:10523000F12DEA6721FE94FBE3145BD8DF13E66FE0
-:10524000DBB9248CFBE442181F8E4383F1A1BE2CF2
-:105250000AA551B938944DB06F289360BF504F7A6A
-:10526000DF3FD497E025A1227A3E203490CA25A1C1
-:10527000A1042F0D9512BC2C7425C181A037B1DE7D
-:10528000A05025C1C1A16BE9F990D075042F0F4D35
-:1052900021E80B4DA3F7A5A17A8265A15A7A3E3485
-:1052A000349FCAC342B752B93CB484E0F0D0ED0495
-:1052B00047849A0856845652BD91A1BBA97C45E803
-:1052C0007E825786EE23382AF428BD97764BAA585B
-:1052D0008F776B333DE8EF000ED7908F93ADBB997E
-:1052E000595C2F1DC8F44FC82A8FD7B35B408FBBC2
-:1052F000BAD60B6671BD9189744DD0DE3441AF537F
-:10530000BE630F0D6071BAADF39EDF9FC14A12EF0D
-:1053100037E2F281CFEFDA2C2EBF36595BFD2AF24D
-:10532000EF62E60BC3A389C35E5750BE6CD6AC5583
-:1053300089ECBB07B26CF4DD2399C1F95900D38A1B
-:105340004EEC45793239EC797534F2CBA09CDF8C88
-:1053500086F60A9B2DB4DDD7986737FAD7B4B18C9F
-:10536000E4A2F42B815D67D0A7EB055E18DBBAAF32
-:1053700098D653BF32AE7FDAAEC1F565FF7E31ED10
-:10538000DF37D9A38A15ED9BA5A0C374F6FFA63518
-:10539000753FC1F7F1F6EC34CEC2B5EC2534B18BD4
-:1053A0005AB4D12900FB6EF4BF94029FF48F0447D6
-:1053B000A74279C0D3E197105EBA35323A0DE0C00A
-:1053C0001DD19750DC0C8EB68D7641F9F27D6C0FB5
-:1053D0002EFFD2566D8C1BCA430FFBF7001BB0F299
-:1053E000B6E098740DC713694A87F16CFA000C3D5A
-:1053F00028577CD6A2C276284E7FB0E3D07E937425
-:10540000710F6B1D9B0DFFD96B99A754C5EFAD6D47
-:10541000299983BAD26733CE1BE7097AE4299857D2
-:105420002F7F54F1E8F864479622E9F018F29BF4D4
-:105430004B6E6ECE22BFE4E6544F2576D9318E797D
-:105440009ED0908FAD8427FBEA62F2C749BE03FC71
-:105450001AECD9F582EF3675DABB89F1BB43C8BFC8
-:105460007F15FC7E5BF07332FC3A9157465E781DE7
-:10547000EF17EB12D6F1CBC8DFC9EA9D12F837E37C
-:1054800079B385ED035D05FD029FF275C5D08FF6FA
-:10549000B1E0EF0BE1F5F8BF18DF462F8057A6E526
-:1054A000909C047EBD14FD63C9E48D5DEC67CCEF78
-:1054B000635DE51CF7DB7A40CEF54D2EE7F666F12D
-:1054C000E749E597903376937FC796CDFB1BEA09B2
-:1054D000A8D989FCD4DE1C839F7A82EAA94479C3C7
-:1054E0000630B2A3D30645C2B84F290C6B652A56C5
-:1054F00043A18C78EC5142FE8722B033AC407F68E8
-:105500002A8AD0A9792C75E87F97EBCD53EBD5AFDC
-:1055100037A9EFE3EB51F245D6E6BBB85F529B02E9
-:10552000F6CB5831EE783BDC0FB2E67B3D36DFA59B
-:1055300093839BBD5E2ACBFAC9F8B72E5BF06FF35D
-:105540002AC2A7735462BBE15BD9AAE0DB0E3FF22B
-:1055500079F85BCC83F64C66F331924F99209F1417
-:10556000924FBCFF5EA1D49F84A17C55769EF00330
-:1055700078526F74FFDFE3E72CB4A9703D8DF2EC35
-:1055800056314E037A48C3753A0AC63E0CF1652778
-:10559000BA6B8CD3511BC52268F702DEA2B86F0F1D
-:1055A0005BDCE467B2DB5BFCB89E993D93E63FD4DD
-:1055B000139C907D9E75E149D34A91A8D3EFFFD902
-:1055C000352EE0BF35459E542CDF0CE5F515D06F28
-:1055D000561B13E575AE91DFDCEF313DFBB9FDCD18
-:1055E000D0DFAE2CFF341C0FF0F57484FE011E2BAF
-:1055F000F9ABBDDDB307E4FA8CAF274FA95C4FB51B
-:1056000083481ECEC176657BC9EC9BA26C2EE74217
-:105610000226B36F24DF5FB47D23C63B3BFBFCEB6C
-:10562000FFAD7DF76FDCC274FEC61E0FB55A35F4B0
-:1056300067703F8DC5D94AEDB985BFD18FFE46E071
-:1056400003673F5EC6BF44FEE2E4788CD078A49F37
-:1056500051FA13D3055F31AB12413D9E5EE1B1D6E5
-:10566000517B6DEC3BD0DE83024F725DA3DC7A7E12
-:1056700010CAA52C2BEED7D19FE4CE8AB78FE58C2C
-:10568000B2B87C62621F77AB1873CB2A5F06BA9CF4
-:10569000C307B91FA5E5877C5D4EECC522AB504E14
-:1056A000F899E681FA294CFEF90DFEE4095F29CC50
-:1056B0000FE33FF0954A50E9C7A26ED8EF4DF429A9
-:1056C00051DC07DA2DCE08EAD2CA1E4E86F14D7B98
-:1056D000BA2582F111FB3185E6692F4B8BA0F01BB7
-:1056E000DBA32203E398670EEC710513D0FFA660DD
-:1056F000ADC1FF65C66367BDE92F7B108F8F5E204C
-:105700004EBB37BB334EBB0BF974D2CC8E66BB1687
-:105710008FD3CAF8638177FBBA4A54590BB87DDA44
-:10572000834556EAED2A5D1C741FB6F3683C0EDA19
-:105730007A893E0EDAD86327DABB3FEE8C83067F88
-:1057400085FAC49FBDB514F9F751DFF667EE457CC5
-:105750003A44BC62E81197867EFAF23DB9389F5709
-:105760004DE39750FAF1CCFBE0C3D9C6F8C219DF7C
-:10577000751951E2ADEC84EB5BFA17E57E18FD87F5
-:105780009E84EBD0886FD97F8DC2F7B5CCA670F917
-:1057900027F428C8974F480E4418E94DBF437902B3
-:1057A000F5CD19DF501FC53D93C81B391EC063FFDF
-:1057B00044F15FE82F619CD59AC3F5588D8DFB4D60
-:1057C0009525E58B715C356E97E2D0F9FB3B84BE85
-:1057D00033C785D48CAFCB83C2EF9D68FEE6F84E0D
-:1057E00087D017882FBD9FFC42F83A6C6BA1F8E177
-:1057F000E1592A5B09ED9C098EC86709BE97F05DE7
-:10580000E49BFE0073787F9DF44C122F3ABCA2817A
-:10581000E2CCE6785AE7FBDA946AD4DFD588475DB4
-:10582000BFE5395CCF4F129039829A07DEDBEB1E61
-:10583000F4308C7FF5FFA23CEC46BF58C70B18BF75
-:10584000603F7093BFA2BAF6CBF2958375F8AC6057
-:105850003C3EBBE7C71E0D9E57F76FCE0DBB92E3D4
-:105860007112B60578BA1B1F8C247F8C2F87FB37EB
-:10587000BBE58F6183785C88ED49A1F869CA9BAA72
-:105880000FED06EC97EB01EE4F5E26E226E6385E62
-:1058900075689141BEA4C51416D1C52FD2AC5BC9A1
-:1058A0003F9B16B3D273F37ACBCA81F53630BEDE96
-:1058B00024FE93D153E2DFFC7CB0C0FBE1DAB91ADD
-:1058C000FA0DEDA989EDE066514F96CDF908C9E2D0
-:1058D000EEB5627D9C098ECC477F55B53DDCBF3B64
-:1058E000EB5CE2E742790E37E7F0FD907BEA1B22A2
-:1058F0008EA736636B52AFA659CF1F8FF59BE2B1CF
-:1059000069C3BAC4F3FE29F1D81F9AE8D7DD78EC51
-:1059100078B11E2F94877293DD68F748789DA0E3D5
-:1059200099600A0B837CBCB552A53814F007E9C70F
-:10593000C30F2A646F466B1DA497EB6B53C83F5B84
-:105940005FAAD2FBFA0D2AE9CF28C88705201F5E7F
-:105950001572C2EC9FAD648A217E3E69588AA13CD3
-:1059600075D6FDAFAE40FF72854DC3FE0E6ADCDF1B
-:105970001CF6AB64BF421BBE28FAA71FB8CA87FA41
-:105980004CF2C341BF4AEB2D7C48F561B7ADC21F55
-:105990007D706D6904F35498128FD36B7DB1FD7ADD
-:1059A0008A03BFE3DD4871CE94BF3E1C08D0FE31B0
-:1059B000A89592DEE4F1D314B14EC7F4A8B811F55E
-:1059C000F887EB6D0CFD461FDE7186D673DB8AC54A
-:1059D000941721FDCBD23F6CF6339BFDCB5DFCCA07
-:1059E000267F72B27C86977212C7EBA5BC4AC61F8F
-:1059F00020B6F67F133926E5C7BB629E637A6CDC5E
-:105A0000B012F0903653253C48BE7CE7EB3B1F4775
-:105A1000399C02FCB18A213EFFE365DC87B0B94ABC
-:105A2000423F72AA94EB983F5112A7CBD4E0DCCE50
-:105A3000322EFF690D4B0C791F66BD925CAE9D5FE7
-:105A40006EADCFE1FE0AB3DE31AF877FB4DEA9AE23
-:105A50007DB004BFAFAE9D1541B8AE87B301E5AFD1
-:105A6000593E98F5C47526391BD70F2A8B0CD58F54
-:105A70005BA37A713D61A7F7675378BE43C8C9E15C
-:105A8000F2D4F427109E4DE1F90E61340AD14EFD97
-:105A9000202DD244FBF2C523904F42CCD716C679B5
-:105AA0007A53C98FD0D28BD753AF49E576F9DE4A06
-:105AB0009AAF2A0DF3E64A5A374D622E3FCE0EF6C4
-:105AC000C885F134F92D29185F18E3B6EE47D74B96
-:105AD000CB680B73B038BEE27921CCA3C0F7F44E8B
-:105AE000C1FD67A9D3DE97ECD4E25CE4CB1FC2FE14
-:105AF00010F8FEC00175FB6698EA01DFD08C447691
-:105B0000BA84E638F291EFBEDD07D7EDEF59703079
-:105B1000B6D75A5DBF01E3C38D3B548A2F4DBFED0D
-:105B20009D4BC8EE36C529D5746709FA539A94542B
-:105B30001FCA1389C7DD6E3BC999A62369B49F6844
-:105B40003AAA88B29BE4A1C4FB5EA857300C7395B7
-:105B5000DC243725FE615E57217E241D2A59F4C0BE
-:105B6000A8A2BF6B5E55E79F572F0FC90FE43335CF
-:105B70003E0FD56DA5F9B5B3541F8E2F24FC43EC11
-:105B8000FD34DAFF493A370A7E94745E24E8DCBEBD
-:105B9000F3CB7BAE84FA2DFE2C8A3AA8BD19E1A185
-:105BA000FD7D37F189C4839C37F0C574FDBCF7ECEB
-:105BB0001C7A3888DFA7A7521C5FDADD32EFC03CC1
-:105BC000FF1AB17F6FC8553AED5EF45FBC9A3DBADB
-:105BD00021B73C417D61EF02BEE763BF951EF645EC
-:105BE00084C5F779C9F21B96E72A179BDFB05CDF03
-:105BF0007F677EC337A7E7AA8BA167A3D5B556C930
-:105C000088E35BEE9B69496B5DD7BF79FD497A28D4
-:105C10003B77FF19E3F866B9B05C5DCC14E867CD5B
-:105C200060BE2ED91D4CA3FC20D37AB990BC01FADA
-:105C30003F8E74482677BA4BFFA7BBD2FFE9F3D15A
-:105C40007F4376E0A7F81EBBEA5946FBC267B18CDA
-:105C5000F2C45E4CFD11DF766432CA6793F931728B
-:105C60003C324FE65798B49AABCBC329F129A82709
-:105C7000BAC11FBFFA07F3C72BE7E78F28ADD3855B
-:105C800082FE0B655EC6F6F3E76574837E6F26A21F
-:105C9000DF72D5D7112CEA3EFDDABAD2AFEDFCF4B3
-:105CA0000B1E277D62675F90FD5E51EB457E19EA12
-:105CB000F14FC6B8F9AE9542EE1401FDE0FDCB39C7
-:105CC0002AC9B51FB1CB486E7FCB62A1F1B683BCA8
-:105CD0007E42E9D63CCF90DE61616B16B4BBFC3AE4
-:105CE00046F13DAFB652C172BE067A5AEBFE7CFF5A
-:105CF000D675BE7FBB80BC52F272893F97217F3A36
-:105D0000358FF57CF2CA9D67B413BAC18FEEBCDC47
-:105D10007F283F7AF32E42AF7603FFC5D85E323933
-:105D2000D1DD3C5058A7AC6756D7FE19F3515CAD96
-:105D300032DDC9F5F63645E8F1D22095DD4E121672
-:105D40007B859E3FBD9DBF574727B62B07E6651154
-:105D5000FE176E5D12B01AF249C2F4FC5EFF694F85
-:105D60003F15F3B45D349FEC89DC0F29E72FF3B4C2
-:105D7000D3C57CB27BF379671FE179ED125FE962ED
-:105D8000BF91516135EC2324DE96AB0105FDE89906
-:105D9000390CD324609F3048413F57A6DF585FE25B
-:105DA0003B97ADFF5CC594AF2AE3FB5CDCCF0CC135
-:105DB000F7BAE709F6AF409F12CC1FBB314FEC4F4B
-:105DC000ECCC8BFA88A935E7E523DDFE647A5E37F3
-:105DD000F627F57932DE6ED47B5B5358423FC3E73A
-:105DE000623D80BD42FE6655E8B9B16D4594EFB2A3
-:105DF000D4AD91FF41557DCE09455DBFCFF4C3F2CF
-:105E0000D6E123BB2A9569BA79E706B20CE5FCEA2C
-:105E10001E86FA05C162C3FB9E0D9719DEF75E5C14
-:105E200066281786AE30D42F02C4EACB7DD7FE9BFE
-:105E3000A17EFF96EF18CA0336DE6CA87F69A4CE58
-:105E4000F07EE0D3F30CEF076F5D6A285FBEE3FBE3
-:105E500086FA4DC28F6CC6CBF63C6E173559B91C0D
-:105E60005AE92A23FF6693CBE8DFBC47D4ABCC18B2
-:105E700055827EF5A663A52588EFBDE957909F3D25
-:105E8000195F98E55A32796A7EFE9CA0F7A997ECD3
-:105E900016E4EB457B60DD5E0E65D7BB6B704EEBA9
-:105EA00006F1F8AC8DF17C2119AF91DF77C66BACB0
-:105EB0003EEEAF4D77B1BB12F0C53D795A427FAA95
-:105EC000E4A3647893FC7821BCBD20EAFDBD787B17
-:105ED0005FE1F9AE7A7DB02DC1B84E897505FAE65D
-:105EE000B53C6E0F0D4B254BDE43EBF162F5811C8B
-:105EF00007E8837751BF98F3744F55BF31FB610DAD
-:105F0000EBCFE6F52DBE12A44B327FFAA9BC2EFED4
-:105F1000F406EE4F4F35E0ED7DB9DE4D7EBDA6F4C3
-:105F2000AFC89FDE64F79574C79FFE3E7C8BFDBDB6
-:105F30008074CED5D157F8E393EDA3428CEDC7F32F
-:105F400010CC65D5F4FBA664FB6329CF617F5C822E
-:105F500071DA16DC7F2909F5A035BF9CF6CFA40FB6
-:105F60005A400F3AC84FC0F66B505E3EC6C2EED2E2
-:105F7000E2F396F6BC83F99C7695E89A9A8F78F9C5
-:105F8000215B96A2FE43F699B9F917A1E7D985E3FB
-:105F90007D64A74D84F9AFD2EDAF257ECCF13D896C
-:105FA0009F893E1EBF5B0DFA11E37BBB73B99E5EFA
-:105FB0000DFB6FC4A3273BE0ED83F63C3C7F02C999
-:105FC000913B9CD68FC4AB39CED75DB933229FF3BA
-:105FD000A3CE8E1B919FC03F133FAFC2E7BF54ECCF
-:105FE0009FC7A983B6A21FF374CC4E785319CFBBB9
-:105FF0006CDC676311A223CF5F9674B4C5D6B4A2DC
-:106000007EB63173BEB29681F3B7EDE3E7C4580EA6
-:106010007F1F66CE9568F7645418F557A6DFA8BFB2
-:10602000B2ABB24CFACCA8BFF2AB8DFAAB2068D4BD
-:106030005F3D1BCA4CFACCA8BF0A43A34DFACCA8BB
-:10604000BFFAAEFD8E499F19F5D7808D46FD756963
-:10605000C4A8BF063EBDD4A4CF8CFAEBF21DAB0C96
-:10606000EF4BA37719DE0FDDF72343B9BCF51143DE
-:10607000FD39FB7F4E793D230E3F61A837B2EDA776
-:10608000867A80F056CCFF9E492461ECCA93CF1BE0
-:10609000DECF14F6DA551DBF34B4C35A781E771814
-:1060A000FE21BD3E62413B1A2956D6F14A4FA0EB74
-:1060B000A288E28B42B5B93BB60DC7717CFAC135F7
-:1060C000FBB09D391B8DF9DF7323C672232BCE40A5
-:1060D000B9D0087C11013E998F79E13AF9369F2DAC
-:1060E00016E702BBC76773F65FC7289F34EC6FC51E
-:1060F000BC77394FC96F7EC16F727C72BEF3C1FE2F
-:106100008B6AF179FAE11FDF6FB6D9916F67EF50B3
-:10611000D8234AD7F934ECBC6F4DCF04F332CFC348
-:106120006C87FE24DF183F19A7BA285E70FA90EA40
-:10613000E3FE46E33A5CBA9FC709963EA790BFCEFE
-:106140008C0F699F26C38B1AE6FB86C61C1689E84E
-:10615000D69F26F0E1F01AD7DF69FC0F1CCF636AE7
-:1061600004F38D52B45433BF0D8FB2AE784E2B3141
-:10617000AE53339EDDBE1E09F94A837F388ED9E2C5
-:10618000FCA199AFCC785FB4E33E3BCAC38BC5FB9F
-:106190009BF989E312A0ED86D913E4D749BCC2BEAE
-:1061A000FD3DD423C9F6B31FE55FF47EF6A3FC7F63
-:1061B000EC7EF6F4F9F45C3BFADBC0BE34FBD9CCE0
-:1061C0007A58D9B9E7CF4A3AF9B5DB1CB8EE823E26
-:1061D00027CF8331E9C99212839EECDCF71E536806
-:1061E000DFBB2DC3AF78613CAF64F82D08A766F81C
-:1061F00055AF6EBE4D80173AF7037A6A5B023BF1EA
-:106200006AAFB48F02E437595DC9EB9BEB0DF0F236
-:106210007342BB73877BC9FE3C5AEA25FBD33DFC26
-:10622000BCF6E7BD224E7437C621FBC7F383368820
-:10623000780D2C3B3FD26DB52DE0D5E70FA77A3313
-:10624000499FA68F7CBE15F3A89B3C168FA221E424
-:10625000F9DCCD2E6BD516F15D8EE13B3E4E15F18E
-:106260000D78B5BAAC5FE9F9F66A2FE3E7AF92CCE7
-:10627000F36A2F8F13DB587003DA43323E6C3B56C0
-:10628000E94479D7C4FC1E2E277D1E7DFE878DF143
-:1062900078F068111F96CF55CF37CBC3FA6D46F013
-:1062A0005BDE047958CB32FC57237D43D6B003ED37
-:1062B000CE9033F1BE789C57C4EDC47CC10025BE9E
-:1062C000A271A8171FFF017B3380FD2E57C39427AF
-:1062D000D9E41E5E127475DFCF35CDDBC53E9AE67C
-:1062E0003D8F7D04F6E9643C47E6CFE861A56D8704
-:1062F000D55782F85E8BFF3D92FCB475889F2E794E
-:10630000AFE21C2EECE3CE9BC72BDBD995E59FEBD0
-:10631000E5F986F3B13DFF004FB3AA6B27FD02ED0F
-:10632000483F4737FC56DFF326F05B2D577D27515A
-:10633000BF77178FCDDE2EFEC266EF79FC85678FA3
-:106340000CC8C078B6F47799EBC97391B2BC36D358
-:10635000D8FF9A325EBE57D0EF77E27E8A27C538E3
-:106360009CA6F3A2CE098CEEE990E74C653B4F7AF0
-:10637000DD54FF8EECD14FE278D71429B40F5D9332
-:10638000A918F6A3B7782B9F447A3C2EFA7B52F0DB
-:10639000EFE662EECF31E761CE11F5E7784713C43F
-:1063A00073AD28C7ECAA9A108F4F7BF9F8274343A7
-:1063B000941F27FC6EF50F2A62FF64BC1701D6F903
-:1063C0005B69207F8EAFB7D1B9D759AA6B0DF26345
-:1063D000B27B0E6A070528FFE9EF3D3F86F84CCBFC
-:1063E000EAAA57A3DE4E7BC67791E7C87ECDF1D3EC
-:1063F000BD787F5B2AE7D30EB78BFCE6E67A4705CC
-:10640000FDD70BBF06CA75D42F592A5B9C48CF1CF9
-:106410001572F59B9F6BE6F77964BB5CF49DF95CA4
-:10642000739BBD6D753E8EF72AC587E717F26B3CEF
-:10643000BBF373F01CA3463EBE35452CBD02DF976F
-:106440005AE87DE6F59E3536CCFBD61866EE331B52
-:10645000F4E3867E520A781C677DF8BADDF9502F86
-:1064600043EB60C583E8BCF7782FAEDB6A9E3F6FD5
-:106470009EDF57021FAED5B0BF407C6889F3D0BF06
-:1064800012780079F367A447A5C6B6F373593C0F99
-:1064900016D992F2157D3C5F3B0DF39DFA7279831C
-:1064A000EFBFCE1A730EBF93EB4B15F8369FE74E36
-:1064B00029B8B8F3DC936B128FB75F01E787C31974
-:1064C000818C02E877F2A895DC1FF6F5B973EA70C3
-:1064D000348EF93A81EF19FA2B5272B81C4ED1342E
-:1064E00092CBCCA3509EAB53F3356039C57585472D
-:1064F000453BD9C1E3926CA685E1FD2A63443BFE8E
-:106500006AA6FCA184FB65B99CB5B23F48FE57055D
-:106510007286A39EE57F603FAD4F83F98C711DA00D
-:10652000F8644ABFC59578AEE1E519BC8D1F2539E1
-:106530003720CFBB779EEB0F470E18CEF5DB1E3D05
-:106540006038D7CF1E3DF0F79CEBAF2C78F4C03FFE
-:10655000F35CBF946787D5E0E1DB01FF370053852B
-:10656000CA105A590DD1DB4B78BB5EE039FC15E0FF
-:10657000D919C7F30D3BF713FE0EDB60DCD0BF6DFE
-:106580003447B5EDFB199126928B11EAF74667CB9C
-:1065900038DC77B6DB3B8660BFED2FBEDD3B0CF20F
-:1065A000E4C80FCEB819F0DF87D60E373E3F79C763
-:1065B0001B6EC4D7913B54B2D7E85CB42E1FA95EC2
-:1065C000F0D54B05819B91AF66ACF8EB70BD3DCE2D
-:1065D00042B9A47FE746544ABD92F26FFED3698266
-:1065E000E97879E1D66C4359EAE5858EC4E7D41F92
-:1065F00011EB62EEB39BED3D35EC3FB800FB3F295C
-:10660000F21B4E6E77D33E4C8EA7EED9523BEE3B3B
-:106610003FDCE96051F203B7DA18F9B3FC13943C9C
-:10662000BCC788FF99C7F9CAAE346A6FD6832AF906
-:106630009D6AA1AF10E035B8732EDF079BE631EB02
-:1066400088361EE5D5AC750A0B6BBCFE1D787F46FF
-:10665000E84E8AC398E769D62F7392DC9F3367E7C9
-:10666000DDF4FD4CE6BF1BEDD9592DE6F7D77C8450
-:106670004C3EE702F19C7B0B84DE19CE469CEB4B33
-:10668000F1A38CC1DA85F5CEC9157C917EB2C249E1
-:10669000F0B3151E823717703E9EBF63F72B3D691E
-:1066A00099B70E47BDF4D6BEFAB49BB5B8DD3D7CB4
-:1066B000F3AD7B1EA5AAC6FCCC1A81F711222F735D
-:1066C0008E38F7507EF8FC799935888F215DC72B7D
-:1066D000EDEC1A93DF57DADD667C9CDE37260DF988
-:1066E000E3F902B1CF1D017851FF7EBC24FB6EA1FE
-:1066F000CAEF4D333F97EBE866C1D733B74C59D358
-:1067000003FA6F7AF1A33E6DC4A7DC7F512EF055DA
-:10671000EE5AD38AF32F6726BF61981D623A7E0630
-:106720007E5251EF98F956F2133BC4BF770ABF4629
-:1067300027BFEEDC40F8957C85271D2C68C381E5DA
-:1067400062A9B8F03D57B35A8CE553B6B63E284F10
-:10675000E698FC0DA794C4FBB7BD05C51C0F9A7F36
-:106760003CE65FCC628135DC3FCFEFC739696D799C
-:10677000E5765CE75BF83A5BF88BE7FE1BE5D7BC98
-:10678000FF7A301DE5D7C7D6963CEC6FC153ABD32B
-:10679000FD28C7ACE174FCFEE3889AF01C71510F30
-:1067A00045E6EBBB304F6D11B11AFC6F667812CA2B
-:1067B000CF3F3D65F3A01FB6F16947D401F858B447
-:1067C0009DE311CA4779F94EC257E30EE3BA9CF72D
-:1067D0001F0FE669E40F08F714F8EB89227CD11645
-:1067E0001BE5B52E3AA4FAB09B46D641F3337F8F12
-:1067F000E38801DD1AB7AAB5F68CAEEFC112B2E399
-:106800007A6BDCCEE9D9B89DD3ABD164873608B9B1
-:106810006DE6FFCC1E46BE07FC905F4DE6DBB2087E
-:1068200097DF4DCF3C3CE4288CEFB32DBF4D57068E
-:10683000C5F99F615628E0EDF4D6FA19F6F3DCD7D6
-:10684000734AAC934EBD20F490B60306960FC59DD7
-:106850001C2EB045D3AF04BC2CD86CF385E1F1827B
-:10686000E754BF0BEDA8771C74FFC4FCE75E7EEB1A
-:106870000A18DFFC6DB69C097C1A2E94DF925E8D9F
-:10688000C8E76571FACCFBF9CB76CCD3C4E7776463
-:10689000C5E9347FDB6E3BE67D9AF13966EB6E3BF2
-:1068A0005F6F267A6D3D3A1EF576D33367EDC80FDC
-:1068B0001FEF52587E51D7EF1B36BF9C8E7206F1E8
-:1068C00084FA45D2AD938E5DE8179DF4CB6154CF29
-:1068D00083719E0BD1F1733C83504EFCFEB35FC2BB
-:1068E000381ADE75F8100F0D3FBB351DE7F39175B3
-:1068F00031E7FBC757E7A1DE6EB085F33C04F9F33F
-:10690000864DDF257E9CF3FA77F97D4ECC5F80EBD8
-:1069100019E65B80F39CF5D80D34CFD92C48FCD810
-:10692000F038BFDFF04B2BAB4AB41F784CAC9B8FD9
-:106930009E70D0E6E1233BE3F785FC4E15F7612D11
-:10694000217BE5BB62CE20A1A9FCA553D0AB878CEF
-:10695000FB73F9D6286A356EB993E4DB27BDFDF9E0
-:10696000B8FE010F46FFECEBE3F2855CA47B5DE82B
-:106970003BE0BF31F81CEBB7DAFC29430CDF89FCA4
-:106980005BDEFF32D13F8C3B15FD7C1FE519F7B96B
-:1069900012FEB687F4ABB156A6E7B3647260CB3A89
-:1069A000E2AF2F0E7139B32832A58ADEB7DAA2F929
-:1069B000F83EB2FB7A85E404D82189D6F9169B58B3
-:1069C000E7C6F7304EABA2C7EF2E7E7E4FF2CBEC80
-:1069D00007A0BE6E5DC7F9C71E7F5E145FAF327F32
-:1069E000638EC99E93D02C271E32C909F93D7B2C9A
-:1069F00037E1F988B87C0813FE16D8223F7904D70E
-:106A0000F53B0E3A17B9E0391BDDEFF3E9B37BDE56
-:106A1000BA19F8FFD3AD723D1BE5AF793D373C7F26
-:106A2000034BB49E3FCD09B084EB199E275CCF3950
-:106A3000FCBCC1FF29F93B2789FCDDDD43D8633A63
-:106A4000BBE34A287EF2D3F985B43F33E157E2D560
-:106A50002C4FABD158C8ED2A4FE1EF10D3E153E2F0
-:106A600051F2E9BCFF5C48FD74F2B3E457C9CF9D15
-:106A7000FC6A9EB7119FE6F7CDB877CA8DD3DFB613
-:106A80000AF6E518AF7D51A5FCBC76AD233D0BFAA7
-:106A90005D2DF27BDA3DA29CC9CB1DB9F635284F9E
-:106AA000E4F38E149EEFD01EE848CFD4ED078EEEAF
-:106AB00054D3F13C405B24715E06656CE4E2E9D698
-:106AC00064EF57D27A684FE5FEBEF654EEE71BA797
-:106AD000BAFA84707FD7C2E34B3357DE948EFBFB48
-:106AE000F69D7D2757E37E60BFCA738EC27E6B0121
-:106AF000E0B79E4F9D9D64E18746A1FDBE73FE04F5
-:106B00006C67E67A235E66BBB6D8B19D2FD91D04AB
-:106B1000673F608BF309FC6F1EE66B219F3F667A2F
-:106B2000BEF35AE2AB7926BE0A225F25384FE2EA6D
-:106B300029F8AA9495F2FDB6888F09B9374E1D340D
-:106B4000B91AF329F7F1F31EA777AA6C0DCEF759FE
-:106B5000112F0BE712BF2E02FED6FB4D3F43BE1B8B
-:106B6000905CCF7FF6C291E1B7439505FFFDDE90C3
-:106B700047017EF6DFEF5CF22B2CFFE2ED3EEFB13A
-:106B8000AEF5C7ECFAF32D94D7B9CB41F79AB6EF2F
-:106B9000FA759FDBB1FC4B07DD2FDABE8AEFB3C37A
-:106BA000BBDCA4FFDB7B737BB1E9C5B343DA487F71
-:106BB000F17B8347F4E4E73E4EEFFCCB070AE6F3B4
-:106BC000ED8459A17C14FBB7C65FA6D03EBDFDC5C0
-:106BD000B386FDE9DF3B9F45E2DC55BB9B55E339BE
-:106BE000E9F64C7E4EB5F157239FC473970BB7EF70
-:106BF000B6D7C3FB31FFFBAF43500EB53FCFED0E11
-:106C0000B08737311F63A31FBD67830DE8770A6D17
-:106C1000445833EF3D7A7062785022BC703CB40324
-:106C20001E705E809706949FC9F031B5273F7FFCA8
-:106C3000AF878FCF6FC1FE17EC1C41F70CC7F1A2D5
-:106C4000F8F97337E57BC0FCF9F35D6787A01D7524
-:106C5000A1F92EFFFF6CBE0FFECBCE97F37BEF9E0C
-:106C60005C1F99F9BE2B5FFFE2362AFFCCEDA3F142
-:106C70007673BDBFF02FBBDEFF39F47EE35F76BED7
-:106C800017A2F77E416FB707E332ED2FFEB50FBBBA
-:106C900088799FFE7F74DE9D768FC5E71C06E37BB7
-:106CA00097456EA85492E78F16F632EE33E43DDC3A
-:106CB000937266931D31C9CFFD314DAC6C1F9EB3ED
-:106CC0000BFB558A5F50F20EE0A1F5FAD208E58978
-:106CD00059C3FD1FC2BCB11B17FAF87D65C6FDD7AD
-:106CE000A4BCAA2AB4E70EAE847141BD836E8BA703
-:106CF00009A630D9AF92FD0790ECBE37475F4B79BC
-:106D000028932B8CFB909B4DFB899BAA8DEF6F6486
-:106D10004FE462BEDF8D0D36CA4FBAC154FFAF3D9E
-:106D20003D44D79BD8E2D5DC9F7371789A2CF0D480
-:106D3000150FE7C75B173C89FD26E50E695DF1E697
-:106D400008F2FDA7035E087B4BE4E52DED163E99A6
-:106D5000D8973A44D712BF0E3FBF7754D72EE1459C
-:106D6000E2FD62F12DE964C6BBC4AFC49B990EC5B8
-:106D700078DE53679FC7A1F15E6D26ECC6499D760C
-:106D8000A38BF0F8DA167E5EE2B58AFAF5A5587E96
-:106D900096DF07FFE5A8A1CC09F33D68633B282EE9
-:106DA000E4F76B9EE1F1FC19A5E2D7149FC0FC4506
-:106DB000FD7E15F317F5F3C2FC457D19F317F5F5C4
-:106DC000317F51FF1EF317F5EF317F515FC6FC4550
-:106DD0007D7DCC5FD497317F515F1FF317F565CC74
-:106DE0005FD4D7C7FC45FD7BCC5FD4BFC7FC457DD6
-:106DF00019F317F5F5317F51FF1EF317F5EF317FCA
-:106E0000515FC6FC457D7DCC5BD4BFC7BC45FD7BD7
-:106E1000CC53D497313F515FFFEAD84B867225FBA4
-:106E2000ADA1FE18E71B86F238CF7B86FADFF61E8F
-:106E300037BCBF46FBD4F05ED2FFDA923386E71848
-:106E4000FB080FC77D0CFF9BE8FB8BA11D2B0B5094
-:106E50009CD4CE161374A2BF17602ADB4AD005CB90
-:106E60001CE18901C1677A21BF6E0AAF41E63A3859
-:106E7000F26C1F94FFAF8DBA8EFB25447C6132FE0D
-:106E8000A7064C9CF6752FDCE7CAF8697A4C65D1E9
-:106E9000A1C0873185A02796C6A2D9C087B1148228
-:106EA00059B16C7A9E1DCB249813EB49CF736305BF
-:106EB00004F3627D09E6C78A087A63030916C42EC3
-:106EC00025D8233694BEEB192B25D82B76253DEFFC
-:106ED0001D1B49B04F6C0C3D2F8C5512D462D7123C
-:106EE0002C8A5D43B038761DD5EB1B9B42B05F6C9E
-:106EF0001A3DEF1F9B4AF092583DC101B15A8225BD
-:106F0000B1F9042F8DCD257859EC56FA6E606C09D5
-:106F1000C141B1DBE9F9E0D8F7080E893511BC3C75
-:106F2000B692A02F7637D52B8DAD235816BB9F9EDA
-:106F30000F8DDD477058EC517A5E1EFB31C1E1B117
-:106F400027098E886D265811FB4F822363CF10BC12
-:106F500022F673FAEECAD83682A362BFA2E757C5FB
-:106F6000FE17C16FC5F6D0F3AB63BB09FA63BFA5CB
-:106F7000E795B1FD0447C7DEA0E76362AF131C1BB2
-:106F80007B8F9E8F8BBD43707CEC38C16FC78E1298
-:106F9000AC8A7D4AF09AD8C704FF2D7686BEBB36F0
-:106FA000F639C109B1BFD0F389B13F13ECDCFF8FD3
-:106FB0004AFABB029673B87F766575EBBEB2FBD218
-:106FC000D2492E4EBA83CBC587D34EED253939D25F
-:106FD000A13948F86D34C4BBE8472460DFB77BE4CF
-:106FE00047BDD0DE595379FCFD5B519F2D7130A117
-:106FF000CF4C72F76B97F07732CC479C2EF8FAB5EE
-:107000008A3DB96847AD296B5B807E930D456D3530
-:1070100008F37A73BFAC5BC09CDE3C5FE12F03B822
-:10702000FEAD59D29FFFBE404EF7E6775D2FFE9D25
-:10703000ACFF751F0FD717AE8E3E745EAF9BED741D
-:10704000B7DE85F2B062BD8297F5CE3DDFF9C16E45
-:10705000B733B477827CAE6FD0CEA8EEB4F3A1A0E4
-:10706000FB63BD037E1C3FB3FA87E0FBD1AB0A5440
-:10707000FC5D95DAF58A07F9A5BEB9743CD2B58CEA
-:10708000F9C92F393D493ED96C41D7BAC53686FE7C
-:10709000C93A8D917FB86E3BCF43467FEA44E09773
-:1070A00006C12F0BD77D4E7EA786C57378DE53842D
-:1070B000FBA7E4EFD8CC6FD9FC0ABAF5BE64072869
-:1070C0003F7EFED346FF55A3F04F2DDC6A7ABEF813
-:1070D000DB09FD9E66BFD48CDEC22FE5E3794F4C01
-:1070E000ED45F3FE12E68DF924C1DBDC4ED41B80A6
-:1070F0000F8AC3483C48BFA7C407EB7AEE82F25719
-:107100004FEFEB4F7972A7352D1FEB05D3F9EF59F0
-:1071100029D6E0087C0E78A47C968E9569940F752C
-:1071200014F4808689579EE008BC3FAEEDDDDE4C4E
-:10713000DC5F698C4738D7539E782D8C01F3526AF7
-:107140009FCAA6739BD0DE901DE8D77CCA46F9483B
-:1071500061B6D4CB2ABAC62B02AB6DC417753B32CD
-:10716000797E5AD87F08CF1548BA1C6DEE3B1EF3C6
-:107170009AEAD6169592BB6E878DEC43199795F4D3
-:10718000EA9ABFCDF3051A59640DA62E01BD4E240F
-:10719000A457CB6EA22BD0ED4412BA9D381FDD1E32
-:1071A00032D10DFDD437E1CB3BB2693DD7AC8AF685
-:1071B0005FACE34FB3FF9FCDBC82EE3D91F9CF555D
-:1071C0003DE4EF8CF9F290BE67D69713DDCCF4AABC
-:1071D000FA5B3DD185BDEBA67B87A7F76533BE0380
-:1071E000CF6708BFE7F4A66BC8FEFEAFDE7C5FF09A
-:1071F000DA0ACCFD64ECF5154EE607E3FB8D151EAF
-:107200002ABFB9C24BE5B7576804DF595142F08431
-:107210009DE715C9F5058C40F97D2FF4E671A91796
-:107220007ACBB8F0322FFAB9ABFEF64639E619E55B
-:1072300086DF9B34EE2AB2DB0DF922D5D71BF34152
-:10724000DA6C22DF6C9DE2C3FB64EA02571AEAB3F0
-:1072500092A1F132EA1F91BF52B73693EEB19B3A39
-:1072600021DB50FFC6B53D0DE5577B6B34BE29557C
-:107270007D0DCF6FAE196828D78ADF8F605A05ADB4
-:107280001B19FF02CDCDE9E2E175BF583C227F39E1
-:10729000F4FFC5011BBD37D3E3843D4CFBF9F0136C
-:1072A0000E1FC6F74EE2F937289F7C53A5FCA29328
-:1072B0003616F680883FA9B06684CCCAD7D59787A2
-:1072C000F9BAAAFA9BCA701FCF7EEAA0F860FD4601
-:1072D0008585F16E860EC03CF4BBEC1907CD7BE6CC
-:1072E000469505E97C95B615E3E4CB9E1AE0C3F814
-:1072F000E8F4BED1DE78DEB0E385141F9EFBAA6FF2
-:10730000E3DF9F84FD7926E6472965148FF8E3C4FF
-:1073100096D916CCB7530FE4E27AFDE3F3FC77CDB0
-:10732000E62E7973B807F03CEF95AD6F55403F27D7
-:107330005A54EAF7D3A71D9B555AF7FE7CBCDF369B
-:107340003EEF08F929C6F708FC09E5FB27B32343FC
-:1073500048FEDCC1FDE35DF103F3457A23BFEAE4B7
-:10736000595CBFF1F81B08A1029413F5361FC565DF
-:107370004FACB751BC10F401E51B9C68C9B670391D
-:10738000F43CF15D9D55B3EBFBAD5BAFFAF9EF63F8
-:1073900068761C2FBB4F0DB21158E6F911E1B54AC2
-:1073A00090C77F8CF4BD75C9083A176DCEE392F093
-:1073B00014ACA9A02EAE34EF451EFF65C3DAACFABB
-:1073C0003C77E99F61C10AC37D460B8A1FBE6714E3
-:1073D000C0D37E7EF5E2975BDC24273FB3BC347CD0
-:1073E00039C04F2786FF6005BABCAE068BFB60DE56
-:1073F0009065FD2685E22AC7EFC1B8FF27CFD97C6B
-:10740000B40C45DED8BC9FCEA5F854727B81797947
-:10741000FC3A9AA778F1766246F922D3D856E15F12
-:1074200088F03C031C04E0C7B380C7C58E97BBEF50
-:10743000C2F3C3F5A6F3C6C7C5398BF23E8A415FD6
-:107440002F13E57A0B5F9F6C17BF8752FE5E9C94EB
-:10745000E352DE4A793DAE4F317D27E52C635B492F
-:10746000BECC16F7252F78DAC1CF1769CC83789C6C
-:10747000CBC9C456F5D1E8BB79F6E71E42B69EC328
-:107480005A49EF7D628BCC6E2DC2EF373767D1F74B
-:10749000365F04D77144FE1E9D95E4C81CC6C7B96B
-:1074A000B045894475FE0EF9FB240CF5844EEE744C
-:1074B000D10B267D304BE8BF59CC946FD462D453A6
-:1074C000813437CD6B5E8BC8C3EE1C97CACE61BCCE
-:1074D0002B187965128D5BF145128C630EEB88E2F7
-:1074E000BDC80B9FE5E798CCE332CFA3BBE39CED8F
-:1074F0009B3216EF57EEECD7346E896F8607AB746C
-:107500007490789F1DE6F89CBD53217AFD5ED85B90
-:10751000F27CA099FE73586012CAB9390FC03EB30D
-:1075200028CE0F920FE66E8BD079C04F594BBA0B15
-:10753000D6C3828DDB6E1C09DFCF79EC753BF27B05
-:107540004D56B4BF25137FAA67F4BD55BD13E87D22
-:10755000939EFF47E18909BF157D077899B545A539
-:107560003C0A5D3D914710267C3584F9EF09361CB5
-:10757000527D4DF0B4017FE6A8ECE2C72BF1F6CFC7
-:107580001EB7D9AED9D6E7FC768D59DE74B16B4CF7
-:10759000FA14CF73A0FEECC8E5F9E95F58FD19595C
-:1075A00024A74D7238B78CEE63957278B6D083B24B
-:1075B0009F59A8FFA0FC878D3F4F477FC6EF1FF85C
-:1075C000791EE56BA0BE1914D737B7D5F3FE6EFB55
-:1075D000450AE54BFD7162EB10B4076B1EFF75BAEF
-:1075E000FEBED79305C1D7FAE078857E5CA86EEE23
-:1075F00083BF6B28E5EC05F76DC9E6E9BEC03CDD4D
-:10760000C679D6E13C75E754EAC53C8FADE5F33B5E
-:10761000BE9ECF776697798629AE72DB930E5F9810
-:10762000EC8E28E9F593DB5486FBAC4EBBC36407B4
-:107630007CC95A36213E162E7DFB032BF0C5DC4B50
-:10764000003FC00735F73948EFCF7D81C7533F5121
-:107650002AF329A0BF379AFE3D783E0FEC05B437D8
-:10766000E2E3E8B403CE221E3BED806EE26F91F0C0
-:107670006B2DDAF96BFA1D2DC5CFF33117C97B6D70
-:107680007698EEB5D15006F073FE4EA4532FF37DDD
-:107690005CDC3FFBA7FE9FDFB294F8BFE312FD392D
-:1076A000B6C6D4A80DF3903BB62964272D5C569935
-:1076B0005EC9F07C1BF7ABE51472BB56F1FB29BF2A
-:1076C000C601744D85FEF20B35FE5CF3F07CF3C70A
-:1076D00018DDA323C76B7E8EFE7627EA439785F4D9
-:1076E000A179FEE30BB9DE5CA85AC8BE5E60E776FE
-:1076F00076BBB8BFA29F1847BF426E6F5F56C8FDEA
-:107700000AED685762BCFB2A07FD8E116363C9EF5F
-:107710006E659CFFAC126F1EEBA9CEF54DF673475C
-:107720002FC4D32DAC957E177152C5140DCF337C69
-:1077300090E7A47BA2E02F80ED4C13ED1CB4F1F395
-:107740000B1F601F30AF69C23FFD015E8F0AFD7FD6
-:10775000506027BB36FCA283EC863B53B9FF90E513
-:107760006458713DDC2CE4D4F4510E3FCAF569A392
-:10777000EE0C2084F6C20CF055E3EC585D0AFDAC2B
-:10778000B4707DBF328B71BF40735B39E2EF7230F2
-:1077900093317F1F66BFFD5CF6F9F8C8787E620101
-:1077A000FA19AE609CC12A08BF86F2023B7F5F5384
-:1077B000F893C90FF462EC779835857A0671847C6A
-:1077C000519B41FBDFC978BE200BA195F8ED3B56DC
-:1077D00016B670B8D645F72A790DBF0B7B43058BDB
-:1077E00066C0FCA2FB8DE73B6E8A5AA203305E6442
-:1077F0008DEE46FC599C9ACD03FD04AA9432C4FB3D
-:107800008255DD1B6F63E1361AEF02BCCF0BC7F95F
-:107810003D85F285A6C1A2473EBDC5CAF6AA659CB4
-:107820007EC8878D595A98EA2DE17C2ECF9548BAAB
-:107830009442F37AFC4E13E38376D6A6E3F7F6C4BC
-:107840007E95DB0BE5BE8FDB6BF3C5BA9D2FF9EEA2
-:1078500059E37A7D1CD70DF02DDAB248F76902267C
-:10786000E3FB4744FB8F08BE5F5328E37FDDEB6FEC
-:10787000A1834569DE2F3A888EB2DFC9026E2CE4FF
-:10788000F9D3721C927F67B3C594CF335BF8692C30
-:107890002049283FB8E549EE1732E51D81A144F99A
-:1078A0006DF3B6989FEBFC3CAA412E91DF54B17763
-:1078B000CCC4F129DF4AF121BF4FB36F25FF80B956
-:1078C0009E0D7F3F15E36E6BC1AE5244BC0CCA8E59
-:1078D000F50AFDEEC5B45E1D83519F83B41E4FE7CC
-:1078E0004285BD3D5BD0D721EEB79A8DF615C6D542
-:1078F000D0BE427C6DE476A555D8C375EB8DF6C637
-:10790000B4669DDDC981E17E0087294FDD26EC8EBE
-:107910000FED1D8351EE9BEF0BF8D0C2E711CE6344
-:10792000FC5ECD1CFEDE2AEC4BC9573F2DB419E29C
-:107930006DF2DC690DCA2B7E6F83294FCB45F7C7EB
-:10794000D428FCFE4EE9877C5FC0D36087D27D39A6
-:1079500047D2280E6EF64FB657BAC3169D9F727A5D
-:10796000C66D93103F35E9762BC2F73BEF156BA33D
-:10797000FE8F788AC9FE5953397423E6271D2BFCE4
-:107980007CB2B3374553C479A83FBD86F9F4D77F9D
-:107990000DF3A1F2D9C97ED847B5BFDC718B134472
-:1079A00077ECDFCF4EB6829E6F7FB0631396532382
-:1079B0002C6005FDD8BEA1A30FDEB99CAAD902F4A4
-:1079C0007EA56CCF16C0F6DA7FCCCB1F15DA027815
-:1079D0009F6E8D38B754738542F2D721D697F43312
-:1079E000D5585EE27034FF5D940BD5CBD6028EC2C3
-:1079F00072BC0FF504FDFE429F62BFA310EAA5F51D
-:107A0000099E46386F8A12B6E379FF43914B845E34
-:107A10004BF83B218E42EE6FCD2B0AD0F7D28F0E62
-:107A2000EDFCE59BB4B3458CEB7F0053DFF7AB0077
-:107A3000800000001F8B080000000000000BE57DA7
-:107A400009785445B670DDBEBD656FB260622076C0
-:107A50001212020668208100419B84252C810E2889
-:107A60004689DA2C02622091D131333A7F77D844AB
-:107A70007434A84F19079D169161E6A92FA32C41D4
-:107A8000B60EA0823ADA282A3AC04445058D4E4403
-:107A90007813FF87FA9F73AA2ADD75495866E6BDF9
-:107AA000EF7DDF1F3EBECAB955B7EEA9B39F537530
-:107AB0006FAA6ECF49F0E6331693E1353B53185B5E
-:107AC00050A1F9AD0318638702B99E38C62633E684
-:107AD0006E8C65EC27FCB93ADCDAAE303106E36F28
-:107AE000CFF4D8AE2864AC2A3C4FDC3F32CF21C360
-:107AF0003C376970EF30F8CF5C4EBCFF866C771F67
-:107B000027F4DFF67F9817E761A34798D810C67E61
-:107B10006667F4F35DEDD65C7B01B4CFD99258264D
-:107B20008C7B615BC65C9887D5C1E4698C7DD5FC94
-:107B3000A1D509F32C6AD7993B89B19A768DDA459C
-:107B40009B9AAD63615C0DB4A511F8550B7C196B64
-:107B5000314F8D0B5FEFEF047C0BF1FA6AC2FBB67D
-:107B6000174E9ABD30EE3653E3E74F24C3E5E19A52
-:107B7000EB59E7B9EBECEEE4EB3CC6585963FEB9C0
-:107B8000FD054E8DFA7F9DE31E8CF44B8139F03953
-:107B9000BA89AFD738FE57028FAA6876B307FA675B
-:107BA0000F89B33B81DE8587BC4BE3008FB96B3314
-:107BB00007E93047FF8C929148373667B842AFB239
-:107BC000CB190BE1FACC6DDD19B4DFED284C6080E8
-:107BD000575562E80E3610C8E6CC69B08F646CE287
-:107BE000E330E672BAC5CDE0DE329B848B3DA38BD9
-:107BF00001FE51277846A0B0C10FF3EC477C609E90
-:107C00001B87F68B66FD817A993126470263237BB9
-:107C1000CEACC375DD3874E458BC3ECA16973B93AE
-:107C2000E8CB483E46F6F44C433C713C837578AD56
-:107C3000C194EB601DDED775971FD6E1ED1FE30DF4
-:107C40007442B70A41D73AA783E8B1DF04780E0A35
-:107C5000E3219FCF98E38E10CC777C49DAC0553072
-:107C6000DFDA9EA3EE427CE4F3D7F6F4CE897C3EC5
-:107C70002CB73F5EBF583C660A3CEE42BE41EB2942
-:107C8000063913B4FE09FE4F1D1DA3C0D74C4A622E
-:107C9000EEBC303CFD9A7405AEACCA56C6DF30E788
-:107CA0004AA5BFDC162AA88D0DCBB7111FD932E625
-:107CB000277C6AE236C63340F1E88E33EFCF003DD1
-:107CC000F9DB7ADDA501AEB7EE7CF6FD1130EA14E2
-:107CD0002C3809E876CA0D00ACF7D4263DE0CF4435
-:107CE000F9709BCBBB33361FA782F10B0FBC641D11
-:107CF00005BFCEAF9D3709F9786BC0F2494B049EA2
-:107D000067D8592BCB027DD8A85EAF610F7CABF74B
-:107D1000472868F5F483791A0DFDB5E3BE60F138A4
-:107D2000CEFC498B5C273CBFEE48E683FB22D6BDE8
-:107D3000C61997FCF995F0CB2036E8271D9FD7FA96
-:107D40002AAC90953635139F961ED05D28A24B7BAA
-:107D50006A4C83758EDB640B44816A7DBDED63AB39
-:107D600013E8F5779FF3C17D16D4FF7AC692F0BE73
-:107D70008FAD2D70BDC8E9243A2DDAF1AD9501DF44
-:107D8000C7EDB89DF47A2CD8B104909F5033EBB76F
-:107D900009E6F767C6B99E85F96F5B399EB1C18C5C
-:107DA00025B4CFA0B6BA613CCDB7B07D1AC18BDA8D
-:107DB0006308DE1F1D1ACB008FFD5BBAB1A580C71B
-:107DC000DB7A30F7B7388F2D8EEC4479FA8D4B7013
-:107DD000DDFBA3FDF93F83E795FFC7B832A4EBA213
-:107DE0004D9A1BE5AC5C67FBB544C4378AE62BD7DC
-:107DF000DF29B81DAE4F2C8DF39B12A89F31E8D719
-:107E000087C4AD6200EB56B0179DC8E73E615F2C9A
-:107E10002D1CEF31ED15349FEC7FDD9945FD12B639
-:107E2000A4AC37CF8A0DAFC7D2A2513BA1FD4A6A9D
-:107E30006B3655989DF09CD7F39E49463AC1F85849
-:107E40006FA776796802EBC47E75D87F618F67A0D3
-:107E50003D86799BB3DC2DA88793EF6931DBD19EFA
-:107E6000C6DA1DCF821C4C2E1AE89C1BB12E7DCF8A
-:107E7000F5CC0972644B6EB3B861FE19D046DAEFE7
-:107E80009BBBF0379F0B3D65AC9EEC85F44BACC7BC
-:107E90003D0CF1BEC9C1F1967AF5AE182FEF0F690E
-:107EA0005C3FFC9B6D8167E1F78FB2BCED68474298
-:107EB000A358E58B644F43191571FF3AFC81BF76D7
-:107EC000E47FBCB98525C2FD3F74E0CFF5FA42F8E6
-:107ED0007F25FCC4DB3AAB43B978FBEAAB436EC009
-:107EE000ABF9EEC183D13FC8E7C5675AF9BC8EB67E
-:107EF000B328AF35BB629CAB607DE5C01B84DB76ED
-:107F0000DA02EB32E93AD392B1B5ADD3A0BF26BEC7
-:107F10002D17FD4FE9EEA820CA6DF3EE2833FA9134
-:107F20003D39DEF8CC14BCDE7BB406F2EDDE613305
-:107F3000A31C2439DD0978BD2B7C2F64C7A43E1A0D
-:107F4000E5CCBB92EB9F57E8E14C21B7B3841ECE42
-:107F500034BB12EE02BC6F7E536768C767DDA3F5C2
-:107F6000DB5480362DCE9513A18752DF2C289783C2
-:107F7000513EB95C56B77713FA9D29E6E57A500E63
-:107F80000E1AE9537E65B700EAF7A2F6241A27F520
-:107F900055EA696AB6F7AA4CE043F952D06F788E79
-:107FA00077495A01EA4B584EAC0E94279093D4B9B6
-:107FB0001172B0B4F97B33CA89A5582339B1415B3A
-:107FC0001A21479E8E38C531B63BE0317959A669F2
-:107FD000150BF79766CA78E5E2E4DD95C9E56B56BF
-:107FE0006C30C704F3596AA35C4B00AF53C94EB25F
-:107FF000638BEF030048B0D8E229C53863F16F34D2
-:1080000017DA5F8C3FD0FE0C395C6BF546E0777D6C
-:108010007B7FE6043A4D6BEF456DFF0C6F05F27FF9
-:1080200066FB7441C7FED432679189819FB9C3CE84
-:10803000FDCCE9DA7B6FC2E79D0ED85CF83CB0D08E
-:108040009CDF02DF42B7EBB2BB10BF372DEC6918E3
-:108050007F22CAABA35E9EE8C91C8F008AB3D700FB
-:108060009F61DE1316E677003FE700EC45B81B730F
-:10807000771B847A07EB8CF02B67CC0D192C1BF83F
-:10808000BBF88363663085B7E686FA07E1B955A386
-:10809000B8FF6F5D6F21FF5FDDFCCE1013F47F9999
-:1080A000E9BE8C81ED1D7BB9F7365CCF82A98117C3
-:1080B0002C00DFF6EB97E28739C3F46C340773CCFE
-:1080C000707F23D0D10F78353EA0970578DC13530D
-:1080D000D1EFC272BDA03D9BE823FD8DB4DF5B7D77
-:1080E000A9B088B01DBF901F92F2BD50E8C142D424
-:1080F0000316E96F2A3CA3500EF334570E8BF43766
-:108100005C1FA49D067927BD29CFEEE95ACAC27625
-:10811000DBE88FF6EA8D8F0C87F5FAB2BC4FA2DC54
-:1081200097FCFB7FBDF4117455BFF887D1C8A751E8
-:10813000576A4CD72EC64E7E6F213B794F05233BA5
-:10814000096DA49DB47411A7AFBB44B96F10720F31
-:10815000F12DC58D68C723E7FB28AB6413F2795B6B
-:10816000A6C6E7FB17E16DB4EFDB3AF0BE38FBFEC5
-:10817000FBCC8BB3EF6FA27D2F3CD79E33980FEDD6
-:10818000F9DF76F609A0BD3FC6C0FEA37FDB11E391
-:108190007C56D87BF207D10981F3D9FB5FE7CC7E0F
-:1081A000B30B7BFF67E4FF3F6BEFA57C19F5C1A81C
-:1081B0000746B99F783FC45FC8A7AD1A43FB1A8E24
-:1081C000B718C9F1FE2C2EC7526F22E22FF2F3A08E
-:1081D0000F819CCC73F5F2BBDA0F0A9C986F16C422
-:1081E0000D645A58DEA5BE487937FA913959DE1F19
-:1081F000C90F083DA97ED1E807BA92A76D16CC5FDA
-:108200002DD5DF723F006DA41FE82ADED1B32E2DDD
-:10821000DEF9F622E5A97B168F17FE1BE5A97B5632
-:1082200061A7F27459D63F113F9C878FE467A49CE5
-:108230004D7C83CB07CBE6F13EC80BE1BDDFDA33E3
-:10824000B03413ED1EB787137F62B548CF9B453D11
-:1082500041CAEBA86CEF88AC083E637C8F71FBC50C
-:10826000C68533926B991BAEDF0C6DA4DDB021FF88
-:108270003A89EFDD599766EFFA0BB9B8109F2BB228
-:10828000FEE5716155677C656EEEFFC37CB14D43C1
-:10829000B9F92E6866A85F5DF1D5B286D35DC2CB11
-:1082A0008366E95F93D0BF82BCDC98F54FD89FF21C
-:1082B000D2C6D37608FDEECE1A5E611E06797A111B
-:1082C00013F58F11ABDD66B42FF0EB709A91EA23B2
-:1082D0006FEB122E3E381AF098F84847BF1FFBC7C5
-:1082E000142774D453309590E37F9935ECE00384E0
-:1082F0007703E7A3B7C5ECE9170117001C170117AF
-:1083000019E0B57C3CFA1107CD13E0F61EE6D7065E
-:10831000212CE7137AC0DAC676C3787193E6C07A67
-:10832000C80DC57FB3227FCA4B5B5E4D87F53E9873
-:10833000555A110B21C00D680701DFA7B226AEF612
-:108340009BC5FDDDA93E463FB646CDAD039FAA8B3A
-:10835000B44056E6B9747C2A4BF567F86356EF676C
-:10836000D6824BBB1FF948F767D1FD41DB253CFFA7
-:10837000BA62E60E7462279F9376F22CC0727EA0DA
-:10838000DDB4469E871BC76F12E34326D34206F433
-:10839000DA9175F36AAC978D615C3E7665DD54E1E8
-:1083A000CFE7E8BA0DEB3D1FBEEB3A59AF53BD3FE7
-:1083B000783E7A6D3CE77E211FF3557949307BF694
-:1083C0007D077824246B0E8C6B1779A21EC0F8BD34
-:1083D000BC54CAF7AD15EE62585F1453EA7F61F9D9
-:1083E0005E50311AD6B788C9FEEAD5E8973CA68E0A
-:1083F000F15CDE77681DF7E781FC50290EEE3F9CAB
-:1084000075DB6AA40FF083FA09369F47DE1B0D70F7
-:10841000B1413F847C937EA2DD06FAE4746237CEDC
-:1084200008BE7DADB14AB47BA1121EEF85B2789B28
-:1084300092CDEB243F083A5AB2791B8A8EA0438F23
-:10844000309FE127887944C4BA894ED7278B75FBC2
-:1084500057554CEA05F727B27E1AC849C2332B5646
-:108460002FEB19BEBFDB33AB484E3AE6F3AF3C8887
-:1084700074BC5ED029E599FB0E0A39D250EF1692F2
-:1084800040801C6CD2FC3AAC7321CA4127EBFCEB58
-:10849000B972E437DCEFB69CE7FECFCEBDDF6DB836
-:1084A0009F59922FE57EC1A749063E9619F838DA02
-:1084B00000574938A0D83369E76635AD5EDE3D190F
-:1084C000EB8D1ABA09B4D7566D20637DB31FAD8802
-:1084D0001D86F2EAB4A483CDEF9FFDD8413BC8725C
-:1084E00005DA3392DFC7C97E4F437D27784D857B00
-:1084F00000CA4FEDF254185F90FD9BD576D0AF1BAC
-:1085000096ADB6604C5394FDDBD56698F7FA82FFC2
-:108510007815E7336B4F1E9C94791E796D30AC63F0
-:10852000AD01F61BC63F7A01FBBECC70FF3D86FE57
-:10853000070CF01A03BC52BD7FE61C8DF46426F0D4
-:108540000F097721BD999CDD111776F8332D96E23E
-:108550002445EE272EE57065F6BF57AC8C8D809FC5
-:1085600079AE22528E2D8CFFCC48667EF41F962E5B
-:10857000ECD9D86CB5DED5B19E3CA3BFE3FD7FC579
-:108580005FD3689F45F1CB7B75156ED6A5BEBD7CCC
-:10859000F08E58BC28E16D1558BFE872DFC3BFB537
-:1085A00002F73D263E24FBB756B823D629C78FFDD8
-:1085B000E1271D9FB7E8992D15EBA1BFAA24988349
-:1085C000F5FAAA44DE829FD1D18FD5887AC7D89D8B
-:1085D000BA07FD4C55743067717EC43A59632EAEAC
-:1085E000B3F96E9DF8E35FCAF39159CC65C57A453E
-:1085F000734242DD0618BFF76EBD0EFDDAB1BAA4B4
-:10860000EE984FECCEE6F9DEDE842BBADF02707313
-:10861000CCCD56ACD736DF3B86DA3DBA7B451BC89E
-:10862000F103D9AF56C4F6C1FE04A2CFCA679A2B94
-:10863000EAC15EDD9FEDA4FBBD898EEE4D18AFAEA5
-:10864000B230AC5733E67A8AE4E6D7B681AB008F16
-:1086500099F557D2FED1AC7FAB189B06E3662DB7D8
-:10866000D0BE02FCF447BCBDABC658B17FCE32D100
-:10867000FAC751BBFBC797DEE80FE3DBEED35DEB38
-:1086800060F0AEF6ACF85980D7A751DC0E7FD2DA95
-:108690002B1EF1ECD5CBFB7836CA6B7C5CB486CE56
-:1086A000C3E18C9F0AF366E6B8D7E075397EF78F91
-:1086B0003AED836D6F9DD51DF9B74EC8CDAEF65915
-:1086C000DD6745F8FBB95F9B89CEBBADCE3B30BEC5
-:1086D000DC1DDD53C3BA0CD03909EBB673447C0DF5
-:1086E000F252F752277EFFA16C9DE872DC56C73E1E
-:1086F00005216EBE3FA518F194F7C9FD374B0FE772
-:10870000A0C838FA775794BC909D122967470E622B
-:108710007C4F7134C0DBB23F5CED07BFC2F642FC58
-:108720008F7824BBC7A25CB17B92F83E686A636E07
-:10873000643D221CA72E11F6808F3BEA8FA3BCF567
-:10874000E8735101CC678EFAFF1217597F977A327E
-:108750002F3ECE8FCEF88BB83833D2F598D9F7F9B3
-:108760002F70DFF0490BD9D1B94FA6DCD386F600C4
-:10877000F889F520E373937A59689EAEF707BF54E2
-:10878000F5C47FF2BC7AF26EF6C98AF5F95DEBC9E1
-:108790003C11B78F7DD2E241399F571867C67DBA29
-:1087A00092275F7916E571DEED51836C80F8BC2766
-:1087B0006DC4DF96B838BF03F711E3E3CCDDA03D0D
-:1087C00021EC574B7D14E5297A772BD93D7D45A1C6
-:1087D00013E953AA33B31DFC8A1EEF727A38BC0C1E
-:1087E000EB86CBE38A9CC85F472FAE0F1DFD099532
-:1087F00013B4FEE17DB393758F3C361457CD02D38D
-:108800008766FEF3FB6835CC9380F5C7FFAE7D34F9
-:10881000AD575CF2E7908A87F7D1F213AE43F1AB24
-:10882000D3096F7D495400E9A967703F318E69B45F
-:108830008FC61CB0FE7EE17D34FD9783893EC77DE7
-:108840002057BD812EF1761AAFFF520FD8E0B9A59F
-:1088500049BCDEAA3F56C1705F0DE8EA77003C2EA6
-:10886000B996F6D77E25ECCC4C8D791A49FF5D1967
-:108870009827CF7D328AF838EFA95BDFFF4D01F2F0
-:10888000AD3C39529F7A08F983F9983D313CCF17B6
-:10889000F5BFCA407C4A7F07F925E69DBAF7B1EBE0
-:1088A000C96EC6D07E1B73B4FC7A28CA4B7DCC40FF
-:1088B000AC93CF7B322D232B3F7CFFBC2577E7F297
-:1088C000FB216F8D47BB1545EBA9DE6423799979B0
-:1088D0009FEE263FD9D34A7EF29365510457F7287D
-:1088E000227D9B69E2FB6F1013A6927DE72467D57A
-:1088F000B1CCFD522CDAFB07423AE78F5FF0CD8A0C
-:10890000FC19DA2B899E7F33D218FCD77542DE66BC
-:108910009AB81CB15D1AED373156EB443B5065D225
-:10892000C8DE19F5B2AC178F5F6766B86EC2FB166A
-:108930003E68732DC9E438E8121FC89B169A42732B
-:10894000711F926DB1517DA306D61115CFCF3DBCDD
-:1089500008F8D79899D98AF52927B76B129F1A6713
-:10896000C5389457E83F6C86FE8571DC2E2FECC627
-:10897000EB3E2CCE1E7836F279887336BFCF198F36
-:10898000FA368CE405F5DF04FD7F63BCBF34BEC856
-:10899000D9924FFBF72BB15E82F8F4E91FF15C80AE
-:1089A000D3FAA33CDE6ECE8A433E244DAFC4E73DEE
-:1089B000AF937D02A57AB008E3C0E7F5C198CFCEAA
-:1089C000BC6FEFD83508FF69A0035198F9C2BBE42A
-:1089D000A76E1372D682F13FFA2D80FF046D6D2FC2
-:1089E0006E1FBC3AAFE7D4F6E2755E4957D9BFF0C7
-:1089F0003E0BF163E1722E0F0BEB3FA07917C6859A
-:108A0000BA233F166EB60C41B9FE85C07B567DCFAA
-:108A1000E2C3201FB32C090E0D2E55FBCBAD08571A
-:108A2000376804CBE72DBCEFBDEEA67C3E1FB63603
-:108A30002147E1795332D0AF7DF55C52C6CC08BEF8
-:108A40007FB56C6B3CEE6B7F1A15CC71603DE6F622
-:108A500028D73AD253CE8FAF96E5ACC37ACD1C4718
-:108A6000280EF7C3E7DC919D88FEEE982368C5FECB
-:108A7000638D992684DD0E4731C26EF30082BF12EA
-:108A8000E754E807F8B448E37253FDDC5E6B163C2C
-:108A9000EF29419FAF9F7F3717EB060B3342B9E8B1
-:108AA0008741AE72D3912F7FD4285E58F49CEE8E0E
-:108AB000EA1F96AB452857A0FF0B845C2DDAB4F56E
-:108AC0002ED4D345284F83CE954BC82FF7D1F51719
-:108AD0009F1ECBF8FDFB50EEA4DF07789905EB6BEA
-:108AE0005601C37310FE1DD23F85FA47F37E7F3EC9
-:108AF000F913D662C5B8B846E7F102703615E389B6
-:108B00009A268BBF25C23E2EC2FEFC707F57721381
-:108B1000EC25F6CBEA6DE4978242FF5AEEDB1C8F20
-:108B200072F1F5F37B5F1D8E79D68B9A03EDFE39DA
-:108B30007A28E85683748AA775527C548374890F07
-:108B4000D3A943DF845CD4304E0749971AB3A0936E
-:108B5000EC17F7370B39AC6682AE9B7A737D17FA48
-:108B60000D12437E44AECF9BA89E1F3825E4FE6DB8
-:108B7000B1CE6A901B573EC997DB3A44E4FFD0F56B
-:108B8000F59F9EA6FA91E4A7C43B3A873F1FECB439
-:108B9000BB5B6298CF2D2636BFB37AF56742AE2C09
-:108BA000B1DCAE7C5C9F7E531DD06FC173BA8B88E5
-:108BB00087B957C4736DA696388A4F7FA93B705DFD
-:108BC000A5FF5E3101D72DE5CEB2513337E13E210D
-:108BD000EB46F497F8955EE699D08DCB5D10F19158
-:108BE000787EAC05895FFE3F690E1EEFB658B18EE8
-:108BF00028F5D488EF2981AF1EAF0DD706203E2E71
-:108C000027EA37033F48F8C41EBE9B9EE73F7A77AA
-:108C100066FFF0738EF9E3CC38EE18E37640CAE5D0
-:108C2000C7A22EF1F1F2AD140FCBE7D873B85C45B3
-:108C30003CC75B977CEE733AE2BC1C8E97D48BFDED
-:108C4000895CFE4B977D40E3A49DC51FACC7497A64
-:108C50004ABA45E8A5421FA95F529F245FFF51BD54
-:108C600062F7A450DC7AAF5837E948F7B05F40F9B3
-:108C7000447F67B3F27370117E93E29A713DBEB583
-:108C80007A3BB92EE964BC1ECEAB1C1948FF71B10A
-:108C9000A9B45FCE96A5EEEB15119F7D8A752FB412
-:108CA000A77FD003644F196865843F97715BFDED22
-:108CB000E31CA350BE9ED3E8DC91F4DFF0F34087C1
-:108CC0009CC27CF30B6ECFC57862794E16F767C9EC
-:108CD000EE93787FF589D0D87867387F19793AA8EC
-:108CE00027607D7053A6923F54B7EE233D5FC84284
-:108CF0002B30DF9D79DFBBE54391FF7FB0D0F98555
-:108D0000390D99E4FF4EAE9F3D1853DB99CB7308A4
-:108D1000BEF5D95B387C1F8FEB662E2FDC80F5F912
-:108D20004FA3DC6351CEDB566B0ECCBF463C5B7869
-:108D3000CF0DD03F22EE8A6E88EFD1F59F960FC7F8
-:108D40003CA24E27BD71AF7F643AF6BB9B74172ED1
-:108D5000710E73DC7303CAB93981F44E9E6B5C6A81
-:108D6000E1F2E6CDE176A33287DB8D4A21BFA54B48
-:108D700097E6E2B982B6A7C14FE1FEBAD5D918C4C9
-:108D80003C70E765AE75F09C1A485B53419E4E6897
-:108D90003C1E9F6F657694AF0396D09D88FF813B04
-:108DA000E306D62302FAD921A81F6E9177411E450A
-:108DB000CF95F492CFBF59E8819C47DEB71FE32AD5
-:108DC000F42302DF93CBFE301DE385931B7312590E
-:108DD00004DD4FE2BA80DEB7827D7CB1937CB03A8D
-:108DE00047D6B902FC39A28E78C0D2D003F77321DE
-:108DF000AE3F1E199F7FF174941DE512E27AF5BA19
-:108E000085FB1588E795EBA03F0ADC91EFE9550952
-:108E1000DE4EEC916C8DF1BE2F27B6D3785FEA9FC2
-:108E2000F17E19DF77D45D7A5DDAB9AE561F300670
-:108E3000146228066780EFE8981F5EC2F397731BE1
-:108E40006C0E1BD0F738EA17EE0B6ED679BC68E7CC
-:108E5000FA767CE7C000D615E61E61AE20C0730F1F
-:108E6000E92E278CDFB7FA5E3ADF71CB5A8D5DA60B
-:108E700045E45D8FAE9E8EEA76CAE55D9106E34FCE
-:108E80006DE4E751A03BD6906FBD9AE6EC3ADFFA6D
-:108E900057E559B2FE64A4FF7FE4887CCBC55C2A09
-:108EA000FD79DEBE1BC4A868D0B9F46FF57929AF8F
-:108EB000FAC6379FDA618D4F97A6C33AFEA67DFCAE
-:108EC000E008D4A3B804AA9FB4FA6A6973F09BA619
-:108ED000C16727039DB6C72638D07E7CE3ABA3EBE2
-:108EE0001D7223E474E4A6663D9DD1F81D2360FC49
-:108EF000AED804DCEEE8641F8EF3D978FEE667B7DF
-:108F00000FBD0CAFCBF57EF90BCE6F89FF971B67BA
-:108F1000C763BCDAFCDBA41DC390CF31090E1485F6
-:108F200079E21CCEE76BB83D3A614FD88075D41317
-:108F30006BA775C7FCF0164B9BD505F3BA7656C4E4
-:108F4000637DE433734BBC035B181F443CCC011DB1
-:108F5000EDE0F03246FB83C38366E6CCA4AD7B92A2
-:108F60009F61ADE600E6CD5FE1BE21FAF1B3D17CB1
-:108F7000FF5EEC07DEB28DD7D93AEA2AA2BE3042B4
-:108F8000AC37363751EE03D1F5D2227EFD8BB52FAB
-:108F90004DC6F94EAEB73810DF6FD65B68FE059050
-:108FA000DF9B401E4F6CE4E70516EC803C3913ED67
-:108FB0008846F2BB00E4D78EF277BBC56D4D3857BB
-:108FC0002E4B37F2FC7A41A346F9B694CF05EEC09A
-:108FD00058A2BB90533BFCFB095C4737D6B802E96B
-:108FE000D195BCFEA3F5003DB7F37A80511E24DD78
-:108FF000A45C84E594917C4AFE27360E1C954E377E
-:10900000F8899EFE129687F1C2522BCBC3F3507E95
-:1090100053B40BF5FEEF51F1FDB10E5567E7ED5D71
-:10902000D1F1EBB0FD7B544600F1FEBBC9F10AE67D
-:1090300059BFCCCD24B9BD4B775A34F8755A72CB91
-:10904000687203A526B709FDE0521BD911A31D7252
-:10905000E672FFB32D97D1FDC5B9FC9CB885D552FA
-:109060007C215B88077A62FC52119378068F92F715
-:10907000CB4D996606B9AE1891786736449E85B98E
-:10908000E9D370FFB76270E2E62C80876E48E3FD9B
-:1090900003120B2D00D76B3DA68D86FE6B72DD573C
-:1090A000E6463C47CE0BD7FBE3F59234EFC0DC1429
-:1090B000F473B12BD10FFC4D6B5B64D2C3E30F6A29
-:1090C000ECD8762D0CB7585806C6DBC5887F4AD732
-:1090D000EDD25CF770FE5CF5FA2C0839B02E31CB7E
-:1090E000FFDA618DEC19F3D8819F5384FCCDB2C7B0
-:1090F00006C9CEADB4B476C84716DAA90433F27DFA
-:10910000B260FB1473B019EFEFC396393EB753A8A2
-:10911000B8F6A7A4AEED3F282AFB5CCE07EBFB9B7D
-:1091200005D60B7CD5DCC06B50310D885C05F64E46
-:10913000DBF1DAF738EF523F6B89223E5439F07C8D
-:10914000B7C6BCA69FA05D18037231005B900718DC
-:10915000B778F3D7FB502D6E957196B788E2C53B73
-:109160001C7C3DCC3B9CE4F54E21AF5FF82075079D
-:10917000F99C120AC5E351D8D6C9C15CB40F65BACF
-:109180007736F2E18BB54B7B2C06F9F9FA459B6BF0
-:10919000128C3F1178291EFD6AB588F7D9593D78A0
-:1091A00035F4EFCFECB36E55847C55E772BFDF9A90
-:1091B00019CCB81BED4C26CF57D9D9BD1977C3F8B8
-:1091C000B2ACF185AB880AEE45B911FB9393CD9D06
-:1091D0009FDFA8E8C1E323B69EFB639B99F9E312E6
-:1091E000A965F140A7F1804B119E4B0558A7FDFCE6
-:1091F000003D1FC7C5635CE39C9DCAF77B9807EDE4
-:1092000096E4AFE4DB39FC049431AE37D99905D745
-:10921000DB87AD75A0FE4BBE7E21F4F10B3BD7C3BF
-:10922000317A2CD9A9C59B795D6FB1C6EDEDE29D70
-:109230001AAF6F9EE36F37AF409B3C7FED6CB26718
-:10924000D28E39E11FCAD702872721E8FC07FCEE3E
-:10925000DAD28BB2674FE68AF70406B281287F170D
-:109260008A97A41D03F6ACBF247E21C960DDF304F8
-:109270008E63F42AA719E9926277A13D5FFC6436F8
-:10928000F94976620D8B1CC7D62691FCAEC8D489ED
-:10929000AFE54DE9CC09976E6DD2E89CECA4A6240D
-:1092A00082E3DBD3082EFFFD6525B8EE8E7DD0DF8F
-:1092B000F726F8E486370ABCBC4E63C7F93D4CE29A
-:1092C00091DF88FEE7542CE00174F6C4AEA4BAA383
-:1092D0008775E443DA4F1AC22035A8776E8B9FF367
-:1092E000C75E4FFA2FD6B558E8D5E203DC5F2F1ED4
-:1092F000C5F70BCDFE3E09C87FCB7E9D0500BEF6AF
-:10930000805E1884A14B853DB7A59A9833826F5132
-:10931000CE68E68CE00FF3BB43986F550A79B937F6
-:109320008ADBFD98BC44655C65EC5C929F50C6D8B6
-:10933000FDB8DE38D7E5CABCCCCBE3632957D345AB
-:10934000DD7C326B5B867EF2DA4AE88F98CF52FC86
-:109350002DF90D4BB11A57035D8E9F4F9EBE90FEA7
-:10936000B10FEB43F264A00FE807F9FB5387F8FB5A
-:109370002710953C5E0CF0F4FD161680FEE5822E5B
-:1093800018B762FE73CA1D477A23E52E847E0FEC60
-:109390005C42914AB76E6E956E49652A7D523C2AB1
-:1093A0003D2EABCC52FAD3BC7D95FEF4F98314B8B4
-:1093B00067ED7065FC1575250A9CE99FA08CCF5E52
-:1093C000395581731A6E50C6F75E334BE9EF135867
-:1093D000A0F45FB971B102F76BFCA5327E40D312E5
-:1093E000A57F607095D23F78FFC30A5C187A421956
-:1093F0003FF4F03AA57F58CB1F95FE11275E54E04D
-:10940000916D2F2BE3AF6EDFA3C0A3D81BCAF85218
-:10941000FBBB0A3CC6F11765FCB8D44F95FEF1CEF4
-:10942000AF94FE8979DF29F07211E794BBFE4BB946
-:109430002FC496E5A01C3B7B788B7A53DDE784191B
-:10944000F5EFF08D1A4BC2FC67FF3407E9FD25E606
-:1094500081EEDEAA1C9F61B137E179F60BD9C50C0C
-:10946000114F8CD127D17B55A71A79BDC3E8D76599
-:109470003C97006ED91CF1DC6E6E3B24F46138A978
-:10948000CCA1C0299E5465FC65954EA53FCD9BA7F8
-:10949000F4A7CF772970CFDA2265FC15756E05CE5B
-:1094A000F49729E3B3577A1438A7A15219DF7B8DBB
-:1094B00057E9EF1398AFF45FB9B15681FB35D62960
-:1094C000E30734F995FE81C1954AFFE0FD0D0A5C82
-:1094D000185AA38C1F7A38A0F40F6BD9A8F48F38D0
-:1094E000D1A8C023DB9A94F157B7071578143BA095
-:1094F0008C2FB51F54E0318E0F95F1E3523F56FA91
-:10950000C73B4F2AFDD55FB982B42FB59DBFEF2A67
-:10951000E3B98979DF2AE32CC910EF63FD9B45BBD2
-:10952000F0BC7F5771BE8C03CB5DDF2BCFFDBB89B9
-:10953000C7E7BFEFCDDF4FBB4BE771E252BF87CE2E
-:10954000E725E28157D09304BF46F287295615D507
-:10955000239369DF825CA613CFBB411C0440A22980
-:109560003313F39098701CDBE3A7C1171FC76E86F7
-:109570001C07F138DEDBFBC7DE8598B7FD692CE6FA
-:1095800039B732FF0AC403FC6E02EE63BD15A5D6DF
-:10959000A3643BDE0E748C78DE81A8861E83CEA386
-:1095A000BFE3EDAD34BE635E51AFD2607D8B23E689
-:1095B0007F10F22F33E869830FF40C12ED877D0ED4
-:1095C000821FF5A512FC98CF49ED1A5F1EB54FF822
-:1095D0005CD4BFD65744F0533E37C1015F19B5EB99
-:1095E0007C1EBABEDE5749F0069F97DA8DBEF9D4CD
-:1095F000FED1574BFDCFF9EA087EC1E7A7B6D1B738
-:1096000092AEBFE86B2078936F0DC15B7C016A9BC3
-:109610007C1BA97DD9D748FD3B7C4D04EFF20509A1
-:109620000EFAF613BCC71722789FEF30C1AFFA5A73
-:10963000A8DDEF3B41EDEBBE36EA7FD3D74E70ABF2
-:10964000D84FF8A4B7A6BCAF2761C646933CC8F86C
-:109650007732E63D281C45966F94BCC7907F18F979
-:10966000F1A5788EA504C25F8C7F2ECF5DB7342222
-:109670002FF8463CEFDE68E68F027DA837F1BA404E
-:109680007D22A3F7C39888CFE709B964C93C2E9F10
-:109690002BF09A27F4A010E5338FE4F3CD4BC9B338
-:1096A00064BE1D93E1FD91E4B3A7C94F758758FED1
-:1096B0001E7EFF0CAF9607FDA76A6F79959EE77037
-:1096C000E5E243CA6DC194EBB09E7440A73A6C5773
-:1096D000CFAB11EF4974D9BFEB640FF447653FEA94
-:1096E00054AF7FCB125789F596A43C5E874DCA33A1
-:1096F00029EDD60C4F621EEEDBE7D46EF899167E8C
-:10970000FF7F0AA6E6A0E715CC69A173B8CCFD0AD5
-:10971000BE7A732D047C085FC7FCD48EECE94DC77C
-:10972000F55C0F0906C2DEE1B68CCED663C42747CE
-:10973000E09323F090EDA10C4F2FC4E7788E5BC12E
-:1097400027EA0AA73857DFF614E2F59F3BBFFD5C16
-:10975000CB0ED35BD637568C12E7B46ED7E43E38C7
-:109760008F13ED4CC689D45F7527AFF7487F79A476
-:10977000A3E5F6F054AD85EC669516EDC278FB5482
-:10978000ED9D0370BFF046C8F770FF54DAD12A8010
-:109790004D0057317EEEA2EA481CC999D1BEC27D68
-:1097A0000CF7FBAA2004C0FCF16C06AFA7BCE5F9DE
-:1097B000D682F3B2E4367A6F15E4660CAE7FC13020
-:1097C0009DBEDFF0962990ABE9242F560DF09F97B0
-:1097D0000CF2D249BC20E56291782F475E07799B55
-:1097E00082FCF966DBD03CDAA7D935CC89F45C6A17
-:1097F000E2EFD5F95FD7F9B90C2CE5E3B99184FC18
-:10980000A7E9FD020C2E907FC3E2E8FD82669DD59C
-:10981000FDA9137B5A2BF8F856AAA52C40F3AAFBF6
-:109820008AB7E6F1FACFAD795C2FCBF71CE889EF68
-:109830000D2EDA6FA1BC8815B4E47B3A3957555325
-:1098400077FFCF7B45C8794DD3C7FC3C166BC98FDA
-:109850003C87B552CC2BE54BB7C6799F8E8DC4AFF4
-:1098600043CE6B849C7F8E71FF649B33E13AB8B525
-:1098700005481384D6FB3B079DE793E7FAE6300FD4
-:10988000B5F380DD28D71EFF6A7AAF7E016BA4EBAB
-:109890008B8A6667205CC3DA46A7C27CD7AEAC7FF2
-:1098A0002515B09BD6B07A0CD6B9A70666BE826DD8
-:1098B000C57AED73BF93F4C48FCF6FD16A975F0EF3
-:1098C000CFBBE1B951CBB18E3C59E77C606F703EA4
-:1098D000803CB9F5C473D7077A71AFD00BC25FEA89
-:1098E00045D512E6D692C3EF8174E849D16D7F4D1C
-:1098F000C73D16731B9D43A9D9654BC4FAC902C65F
-:10990000FD76B80EC4FDB5D4832F2D9CEF5F3EAF1E
-:10991000D17B365F6A8CBEE7D055DC20E34FD03F69
-:10992000AE77C762B8FCEBA2AE97E14D1D941DF671
-:10993000CF5F9A0243E2B3C97F3F83EBB194781FB4
-:109940001888E7F55ED05C4B01972FBB0532F839DC
-:10995000810E3FC07E8A09D7091FB4F0BA9D31DE5F
-:1099600095EBE80A4F9B95F9713F4B2B7AF57B8C71
-:1099700043CEC5D79B3A04E8B214598475C9128FF7
-:10998000B3333C9689E7EFFF81E7E3FE9E8CCE057B
-:1099900019E9A939F873BAAAAFDAA2393ED24F4908
-:1099A0003CCFC58BF3EBADBC4C5E6714F831E6C819
-:1099B00073C0F3CDE66817EA6B85D9FB67D473599A
-:1099C0007F9379F1FECC2FC81FB0B34B7BF0F3C768
-:1099D000C1AEFC706B473E9E15F693B28EC58A3BB6
-:1099E000AF477AEC0EB25F53998BFC451F7644D299
-:1099F0008BEA583AEE10529DD74BEBB0A1BD86369C
-:109A00000AEB28E42F0324AF318817AD2B841511FE
-:109A1000B63A269EE830FC30233B3D1CD700EBDDF8
-:109A2000F9310BE079AAE633D34BE3A07FE7D766A1
-:109A3000CA831E8F79211DBF23B1F3E4FBE958EFE0
-:109A4000A93FB385E021AD634FF2FAD9911938DF10
-:109A5000F6D356A78DE280DB890EB24EB99D311741
-:109A6000EE83167D184BEF19171E6A8C21BA89BA3E
-:109A70005AB15877F1695E0FD985C030C803DAACA6
-:109A80002C18112F5B1C2A5CC422E04C7C24C011D2
-:109A9000758E4BCD1FED7D445D6D281B1A595763A4
-:109AA000ED899DBE4F65DC472CD038DE9FE679BA44
-:109AB000F5A13ADB549DD3FB471DE975756C200D6C
-:109AC000E3DBE65B37A461BCFB78CC8F44C7277E21
-:109AD000B0A6215D1B46FD27F99106B83784F9AF82
-:109AE0003910C5A8FEB590EA6B570B3FFBC4D94FA0
-:109AF000582AD0B3A18891FF64C20FCBFE86B3A7CA
-:109B0000E6233FCF14DB9D681772453DB4FEAAFFE4
-:109B10009BDA12418F9D10570781C1DB21AE0E42A7
-:109B2000ECBF0DE26A84F1BD536C37435C8D6D0070
-:109B3000E26A6C9F82B81AC7615C8DED131057639F
-:109B4000BB06E26A6C1F83B81AC73D0A7135B60FAF
-:109B5000435C8DD71BCECE2A257C0E337ABF7E493F
-:109B60004CBC09ED2BE01F8D75A1B7DD83A2911EC2
-:109B7000579D3629FC2D6E8D56E0E1C713C3FC4579
-:109B8000FE1FB95CE91F72284BE9CFF4F755E02BB3
-:109B9000EA062930D68722EF4F9F5FA2C069DE090F
-:109BA000CAF8CB2AA72A708AE706657C52D92CA569
-:109BB000FFA178031F03D526958FFCFB0A678A63F4
-:109BC000E97C655772FAB0E08B841FF9855ED9593C
-:109BD000DD766E1FB95FCFF381CB056E8BFA384906
-:109BE0003EF71D1DFA87DC02E487896F9BBADB62B2
-:109BF0007A015F721F31313C5748270E003F87B80A
-:109C0000EF9192533128977BCBAD51C89FDDEE92F7
-:109C1000688497945BD322E5A821D33B88DE53F078
-:109C2000F2F5C9FB1F2A997ADE7DF48751FE7A9FEF
-:109C3000A77FC2822CD48773E8C8E6D37E6D988E46
-:109C400053E9FB4ECC3B5FC1DFA8170C37E9D3F0DB
-:109C5000B976959EEEACFB900E4F3C6AA673581DEC
-:109C6000F389FBE57C63F4B3312DF9E7E2BFDBCD8B
-:109C7000C743FC1B8574816729F825BA9CA3903ED5
-:109C8000BF11FAF66F42DF1E177CC53C1661E6E095
-:109C9000F749BE35CC7F787C2EEA4D11C76BDD3598
-:109CA0000F6B686E9298ABDE1141D747051E4F8946
-:109CB00075ADC579014EB9C6AD21FD32EA3C1AEA4F
-:109CC000DB15F7B410FC84D0EF1EB56D74BDE71D35
-:109CD000416A2F9F1FA2FE31FA73B48E0E3AB85418
-:109CE0003A1AF91410EB91F386EF7FF100CADB19F1
-:109CF00037C73FDE1FEB467F11EF77B878EB14AD27
-:109D0000CB85763FDEEF16706D3EC2DBC4BAE2FD56
-:109D10007E8203625D0DF3930F6C70869FC79C3546
-:109D2000A6487FD3953C6D15F4DF2CE864BC6F9B8F
-:109D3000A576B0A313BD92ADF4A745474C06BB135F
-:109D4000ADE8FD01FC85FB8177C80FF83DBAD8BFAF
-:109D5000223A4EEBC897AA489E56C7DCF406E6DBCB
-:109D6000D71CD219F7B7935F417BF9EE781BF9D373
-:109D7000E6F1E37A46CA5D9358C75641F7617EF72C
-:109D8000D13B60FC448F8DEAF14399BBE79D30DF06
-:109D90008449BA2B08F31DEAF0279E187EDE81FB6A
-:109DA00093A9620D7B264DBB1F9FFFEE21B00BCE0A
-:109DB000309EB27F73D9B489FD908F21CEC7AEE8B3
-:109DC000F39AE0D72B02AFBD825FCD42BE770B7F07
-:109DD000B253F893EDE84F6CC8E722B11EEE4F3650
-:109DE0000B7F12427F02ED5BC29FBC89FE04DA82C8
-:109DF000F1D9A3C96EDA35E14F2041A1F3048B9468
-:109E00007549BCCA7AE80ABFC626C728FC1A1D9B3A
-:109E1000A4F49798D315D87D364B81AF3ADDD7E0BF
-:109E2000A754BF32FCF870839F2A51E0218726286F
-:109E3000F757B8A729FD538A6628FDE5AED94A3FF2
-:109E400013FB6185FC775618BD56A73C57EC3BC900
-:109E500078EADD329DF66D86BDA7BB22F5B690751A
-:109E6000EC9399709F0CC217A759CE97A5F4531C79
-:109E700075C8E249C7F37BF5152087D0161F8238D5
-:109E80008D8A8F20D710F7167AC6511C08F1D26040
-:109E9000E2431BDF6F92FB56C30CFB4F13F2D5FD61
-:109EA000A9C20BEC4F8DE8DB455CD62BE9A2E23270
-:109EB000D02F8ABF1E8FB9692FCACDB60F214EC5CC
-:109EC00038F7C39F53FC25E3B6AD9FFD9CE2DBADA5
-:109ED0001DFAE255F4A550E8ED9643594D2DA06FBB
-:109EE0009B5335972035E94B91D497166137CB6A50
-:109EF000E8FA1071DF568B2706E3BFCD8797887984
-:109F000023EC08C5EB117604F34896A8F6A7A687BC
-:109F1000FBB338B322C733D6D730DF20033CDC3065
-:109F2000BEC4004F308C9F6A806F308C9FA5F43781
-:109F3000C1BACF176F6F16F6418E2B347B7457273B
-:109F4000F676C821D5BE324F8D72EEA1F9E85CB22B
-:109F50009B5B8EAC10749CAFF0678F7CCE21A0739E
-:109F6000FEB9F79798FD31FD410E4A0E9B5DF5CE87
-:109F700030FF249F18E6C311F395DA7545FF9A0E5A
-:109F800073FE76B5CE5DC23EEF107EE66543FCA65D
-:109F9000FF70FADD29203F5B5A4C945F6D393435F0
-:109FA00009E7DB7D760EE1DB74D844EF91ADFFE38A
-:109FB000A46BF17D45899FC4A7F0BD2531B8CF7A48
-:109FC000A6C544F6AFD0E24972744277A37C7535DA
-:109FD000AF945B08A092902EBBC10FD1B961614FC5
-:109FE000255DF61C7D8CE8BEEDF0E224A4FBD5EDEA
-:109FF00026852E23DBD4787DC48944051EFA318F53
-:10A0000007C1EF2AF4BD10DE46BDC09D1115BE5C30
-:10A010001D7F91F1C076C1A76D824FDBA35C959D3A
-:10A02000ED6B6C3B669D1FF95D854FFBF2BAD1A7C6
-:10A030007D79FD6D33F011EDEC99E326B2B3231C6D
-:10A040008D7A6D27FC286E3519FC841A375C6ABE40
-:10A050007AACAFD8EF34D8C5AEEE9776B1447E3F38
-:10A0600025744DA7E763C37C10E72A0DF49471F4BF
-:10A0700085F926CFA31BF8D7C5FDE179FCC67CFA8C
-:10A08000BFFA62FDA5A582FCCDEA98B7843D7F8B1F
-:10A09000ECF93BDF0B7BFE7D778A930E8EBFAC27FE
-:10A0A000EAD1C10E3BCEE222EDB83C0F196A7D2702
-:10A0B0002632CEF70879DCE97E77E200E4672FFDEF
-:10A0C0007F34DE794BC43B6F62BCD31BF78178BC15
-:10A0D00073C03D9BC73BA91A7D2F6649CC55666F5F
-:10A0E0002772FABF3DCE9952A4C639E52E35CE91DE
-:10A0F000FB07BB1D1A9DC39A98A7C63DBBF117ACC1
-:10A1000033D9B500BEC7B5DD3DEDBC763828F4FBCC
-:10A1100080E0CF6BC20EBF22F2861D487FE24B99D2
-:10A12000E00BAF57149F76C5BA9CC89FF93C2FCB64
-:10A13000ABA17C7AA4F4EFBE5A1A7FF0CCACD3F872
-:10A140007EFF6E470CD55976233EB0848316EF69A7
-:10A15000FC7EC56EB7E65CD2495E3FA24DB50332C8
-:10A160004E9072B9BBF51392CB5DEDE7F7A7D27EA7
-:10A17000C971AFB1974A913E57B5328679C385EC24
-:10A180008FD12F5EE839C6F123CC8D7A677EC7F870
-:10A190001C4F7B50C7F3CF3BDB4249B85DE7091E3C
-:10A1A000D0F13DF0E2B620E1BBCFAD39F44C1A5707
-:10A1B0008AE7A25F3BFBCE44BCBEEBB4D964A37D6F
-:10A1C0002607E96DB1D0CF37CF9A625D445F9DF627
-:10A1D00039826D9FDC8FFAEAB7EBF4BEC8EEB38329
-:10A1E0009223E9B6EA4A9DECC9F6D13613D697B761
-:10A1F0009F368BF3D6418A1F76B467C562BBDD0DEF
-:10A20000FA43F62244F47FEC4A07DDB713E6E3761F
-:10A21000C249784839089E369575F6BD9DC7AEE4AB
-:10A22000EFD18F38FBD718A4CFABA7F7C4A0BDDA06
-:10A23000D5C69F33E29E9618CC33DF6837C5F1BA96
-:10A24000CAE064BCDE3CE6DED841B8AE3613DFBF00
-:10A2500011718D7CDEEED1F3A89EBFBB8DE761BB93
-:10A260004FF3FAD1F6003FB7C6841D93E3B79F9E24
-:10A270003AB11FD60F02161A3F820556C4C3B8570B
-:10A2800052B65E49E76BFCD52CD2EE953AD438A78E
-:10A29000A4CDE09FBCD5A407920F07BF9D7A4D05C2
-:10A2A0009DAFE77672BC59B52FBB4E2F499E8ACF22
-:10A2B0008FE5CF67017EBFCCCFF0C71CF1DD95FAEB
-:10A2C00031D74D2BC7F936F373662362557B767011
-:10A2D000D4ECDF2EC4F3FF9B62C8CF6EC7F5E3FC5E
-:10A2E0008718D5CF76973D521A8F75EB56E6E271F7
-:10A2F0009C6AD74BCF6CDA1B0FE3DF59AF117DC7D8
-:10A30000E5A9EBDDE9CEFE35E6C1675A397D653D4D
-:10A3100049EAE59ED6C41BC93E8D86BB818EEF946B
-:10A32000BD4475EC5B03EA3C4337C628782F6C4983
-:10A3300034E46F6A7D1CE24D591F882D1F12CEDF59
-:10A340000ADB797D7DE80F53070701DFE2D1FCFCD2
-:10A35000BCB12E3EDE6C53E32C435DBCD0581737A6
-:10A36000FA73118F0D11FB1AE7C43FC2CFC97AC32C
-:10A37000364B7086E712E2876166485DE85CAF376E
-:10A38000A900E8FFB2882F87591B7E9606AAB2550E
-:10A39000F78F6011710173F859F290707E3BFCB831
-:10A3A0009A0F141D51E512F2C7CF319F5C897B9A39
-:10A3B000A4077E7E2EE222E38CD531FD9B5A80AF2E
-:10A3C000430F31B1DFF17FF6A25C357D26F73320F4
-:10A3D000F4E88EFBF38CE2EDE6CFAC24775BC6703D
-:10A3E0003F25E314B94F730D6B5956AAE1B96CFBC5
-:10A3F000F216A0E7A68373D317C1FCEF7D44DB9D63
-:10A400006C4BA1FC3E7D83925F0E9575A823267F41
-:10A410005201C6EB3645AF657FD3912531F87D916A
-:10A42000332113C969F38756867F1FA069878DF68C
-:10A43000739A0E5B69BF65DB0EAE27B2EE2CE3FCB0
-:10A44000D7853DDF2FE2DE5745DCB24FC42D7B447C
-:10A45000DC121471CB2E11B7EC1071CBCBC26F6E26
-:10A460003A22F4EF9E9800FF8E2DAFCB4A3C6FEE60
-:10A47000DD72D40C0BAEF968C89A20437FAEEAC9EE
-:10A4800078A7AA27E35255FB31C691AE8C2FB5674A
-:10A490002BFDA3D8954AFFD5ED830CF9C870433E38
-:10A4A0005262884726AA7A792822DFA5FC5ACD77FE
-:10A4B000AF8DCC7733914F3C0FDCD6F230F171DBAE
-:10A4C000F1AC84C8B8EC65A137DB8E73FFFCF28970
-:10A4D00053719DC56D27043FBE14FC6815718A2712
-:10A4E000CD7D7D7E0AE615A7AC78EEA32B7996F795
-:10A4F000CBFB4E043E8D8FF47F9F51D21886BFDE7A
-:10A50000F2975CAA9F5CA47E2C8DE3E7DC366BD1CE
-:10A51000F4FEFD85DE6BA9CBCF12E7926A07F07DD2
-:10A52000D1DAA1D86EB078D2F1FDA7CD9A6706DA5C
-:10A5300071FF6FAC9DFE3D095FBE3CD7C49AD03F12
-:10A54000F023C9F0F39C6646F98A12E0D3CCEB43C2
-:10A55000FAD8315F87417AAC87E1BA36595813FA95
-:10A5600079E6664E4777C655089E73AA9F77398E5F
-:10A57000D7427CFF18DC2B7DEF038F66E177B7B005
-:10A58000C57D329B9DBF7760C9F7DE9F5FC8BF67FF
-:10A590009B3008E72DC9E6FBA841B2DF33C4BCA657
-:10A5A000981D3DC99F7665570D792EAB56DF473113
-:10A5B000CA4B93B0B32F677A6674F61D8C67F3F9B4
-:10A5C000B9906D5F4CD6F1B905F67837FF2EA45BD4
-:10A5D000C7F7C05EFE7242CCCC4EE42CD87FE6B307
-:10A5E000F911725010AAD5C5DFA930A9F52D531065
-:10A5F000F97D26D64A7A3D1C179C78EE7C234EA81E
-:10A6000071DEB01635FF0FEFEF376878DEAC439E92
-:10A610009021C8FF83FC7B1A179227E3BEFD07F940
-:10A62000F2BCA4F72F788E584F88A5F3359B0EDA2D
-:10A63000D7611C69ACF7BDFD1EB7E346FC9BDF9BF1
-:10A640009E8EF1D7E691D7A5A31E6F41034FDFF38E
-:10A650005934DD1D09E3FA63D1DE33FE9D2D7FF50C
-:10A66000743C2FB365BC8417F2F1A3F8F8F79F7B15
-:10A67000EB31FC1ED8961B453F7B808F97B0BF66A1
-:10A68000FA28ECB79808AE781EC6437F7B5FF707C1
-:10A69000246FF9EEC328A71B5077001ED5D7FD11F4
-:10A6A0005EFF00650CAEBFDDC77D24128EEFE33E7A
-:10A6B00016096FEEF02F6DB191FBC7520EDF3E3CD5
-:10A6C00055F81DCEF72932AF29BEB83AFF9F859CB9
-:10A6D000BE21ECD501E13F5E13FEE315F41F940F9C
-:10A6E00073FFD12CF68D770BFFB153E4BDE1BCCBEA
-:10A6F00023E28B4A910FF33CAC606429CF7B1DB2FF
-:10A70000CE9F61EE2C1F9A5CA0C68993F255BF3292
-:10A71000A1579222A7653DD20D7972B6214F56FD01
-:10A720004A8979B0214F1E6EC893D5BCB7B87582DF
-:10A73000214F9EAA8CFF20DF29F6916E30E4CBB327
-:10A740009471613EAAFB36617ECDEE948F5B8A6781
-:10A75000DFFFBF8B8F9DEFD7FCFFC7C77F501F6305
-:10A760004DCAFE8DB17D53F8FFD785DFD82FE2802B
-:10A7700057459D639F88E7F6201F7B635CE7127156
-:10A780001D3FC721EB202F8B3A549338C7B145ECBE
-:10A79000BB6D1275A8A5C5DFF1731C6799E0E35B7B
-:10A7A0009DF2B1DCA5C67913F3543E8E772619E2EB
-:10A7B0003E35CE1BE350E3BC52BBCAC7516CB0213F
-:10A7C000EE53F938B2ADC410F74D30F829F51C0737
-:10A7D000C405ABFA15E27B09EA798EC2907A9EC372
-:10A7E000E8DFE5FB8A326EE888137CEA3EF326F464
-:10A7F000A1B85F9466E5DFDB307B2FC7B843D2EBAF
-:10A80000B7FDB83FDFF2979B889E85E8CF3BF1DF2D
-:10A810001BFAF1B868433F5E97C0F723A30761793D
-:10A82000D3CFE39F84490E7EAE8A85F0FB53E78940
-:10A830009B36F44B09C74B66472DC33842B799FC8A
-:10A84000F8FD5DA6DBE9DCDDDB5DC451C7FA65CA56
-:10A85000EF9F6A38EF5FC4BC5AF16B14579DEAE76B
-:10A860006EA4F94B5D6D5817DFFCA1D5558FF21C16
-:10A87000C5BF83628CB75EEF97CBFF7E8FA01F9E14
-:10A88000FFFF39FA4BFC502CF9DF16D57F6220010F
-:10A89000F36C88E6F09BFD3E9E8EDF1794FEFAFD7A
-:10A8A000E74F913FCD8DBD7C36E6CBDA1A7F22DFB4
-:10A8B000AF0C927E19E3B62EE35F439C7624CFFD66
-:10A8C00006AEEB1BE19773F1935283BABE7F43B49C
-:10A8D000E736FE3D18B78ECF957492FDFB04DF5F1F
-:10A8E00017F375D045CA157E9F2631E23D5803FE09
-:10A8F000925E2B0EEE0DE111C64B5D8F5C4727F289
-:10A90000E3B940DCFD4D67F2C326B9C47BBA9DC7ED
-:10A910007D16114746F27F38AD2B20D7CFC60CC22B
-:10A92000F75FE47BEBDC1ECA7766121D0D8E4CD000
-:10A93000A39B0EE974CE81897D7073073F8B35F43C
-:10A9400033E6B11A4B8AA8BB1AF7138DF503E3B9A6
-:10A95000B2E2D6CB15F8AAD3EAB932F7D9BEE7F5F9
-:10A960002BA3634718FC52A9C16F4D34F8B5690693
-:10A97000BFA7D6C5CDCC2CBF3324F6EB35277E7FC1
-:10A98000C7CC2914D92FBE03C4E9BDAC0BFD95E794
-:10A99000674FF57312DD3BF4632D7372FEF995F783
-:10A9A0004CF4582FF1F9A121D28FB928EFB50687C1
-:10A9B000D1F73CAD2EF5EF33047CF68F46E7E07B14
-:10A9C000368CDAA77C8E8F46D3FB38A9D43EE17350
-:10A9D000D2F535BE3C6A1FF3B9E8FAA3BE226A1F5E
-:10A9E000F6B9A96DF09551FB80CF43E356F92A09DA
-:10A9F0005EE9F3529B05E10DFEBD812C3F7301C65C
-:10AA00002C7B253C2F82CE997EC023828E57D43951
-:10AA100014B8676DAA323E7DBE53E94FF3E629FDB7
-:10AA20009755BA1438C553A48C4F2A732B703777B7
-:10AA300099323ECEE551E098BC4A657C94D3ABF4A4
-:10AA4000EFB96A7842CB79F4B9C1E73E8A7458E528
-:10AA5000F31CE5742A3BCAE95349ED2DFDBB117F78
-:10AA60001DE64637FA6D47BE83E1F976AB9DBFF729
-:10AA7000DDCDECD0BA45CCDFCD0DF329F8C27C4A50
-:10AA80003E17E0E789F33C4755BC2B95FB4007C9CF
-:10AA90004FCA38668CDE230EF3B1FB2D8E3F0F06B6
-:10AAA0003CEE1BA3337C6FE5E0E8695417C12D4CE5
-:10AAB000D6891DFD4CC4A731FDED942F4E7954A3CA
-:10AAC000FC0E56528E75C4B987B25D917F0F4AB69F
-:10AAD0006FFF8A7F6F2866CF3627D6C5A614CF4C66
-:10AAE0008A8AC8FFA604BF1F9D46F30D1C12057875
-:10AAF0004C5933D33A3B3FBC3E396EEEA36A3C1A05
-:10AB000096FF805DC4E3B44E699F5639D6D1F555A2
-:10AB100079E7DFB73929D6F58588D73E13F1DAA76B
-:10AB200022EEFE58C4DDC744DC7D44C4DD1F89B875
-:10AB3000FBB088BBDF17F1DA2111AFBD23E2EE15C0
-:10AB400022EE5E95B78EFEAED5998D1AD3CF73BE29
-:10AB500074C17A759DF3D7AAFB86731F55E3EE394E
-:10AB60000FA8F1DAAC656ADC7D739D1AAFDD58ABD6
-:10AB7000C66B33E6ABF6F17A6FA9025F57A9D6E54B
-:10AB8000AEF5A8FB86924FD3CA543B694B55E3B54B
-:10AB9000AED6BB35385EC7BF4382CCFC34C21F463D
-:10ABA0007C0F5E39EF58E07097E27E4D21F32CC5A3
-:10ABB000FD9C91A6D0BBB8DFC4DED7E93B904D78B1
-:10ABC000C730D0D73343264D7146F81DBF4AD7AAA8
-:10ABD000236A7DE4863BD438B8A25ACD67AC656A57
-:10ABE0001CECEEA1EEC74E33F81D26FCA195FFCE5E
-:10ABF000467BCEEF874C31D5F4BED2A5FA232B335A
-:10AC00009E1FE3FE889E9BA5F4933F320FE0E7244E
-:10AC10008688F714EAA386BE89FB777B3EE4EF17AC
-:10AC200000D943BDE0FEAB18A7B7D53E8EBE1FB717
-:10AC3000D3C2DF1BD89D16EB5A025D579DE5EF0787
-:10AC4000B076339D1FF3E27B235938AF7A7EAC3068
-:10AC50006456CE97590DFD97A14F3C2F3EFC1CDD4D
-:10AC6000FF1C3EE21CC7003680CE47B474FEBE41D6
-:10AC7000471C679053697F0A823C3E2AE8323EAA0D
-:10AC8000A2EF8C99DF67F49EBDCDD476E2197C3FAC
-:10AC9000EA735E871DC5D4BCED9A496ADE36C6717B
-:10ACA000FEBC6DBC5395D78979AA1D2877A976E09B
-:10ACB0009CB8A6859F43EC2AAEF10CC892EFE91030
-:10ACC0007DA272F6C5F07D4C2E3F23C43A1FB27AA6
-:10ACD000E8FD95653D19F16984839F57ACC77D1BDD
-:10ACE0003CFFF71E7FEFC5CC3C4903B03D3E569C70
-:10ACF0005F9CE4A2F95A39BF8AE0DF4F59E79E4FC3
-:10AD0000B485CCCA7737CC2C82BFD03F07E5AB30B7
-:10AD10002C47FF7BF012E728A59CC5265E60FFCE7E
-:10AD2000AFC481B21D1572EBB88E571C7C1FF59510
-:10AD3000506D08BF13F95D2AAF53DCDB63AA997F1E
-:10AD4000B7C51D3B06F83256ACBF48EC936DF1B168
-:10AD500010C6739B7C766AE5FEE78AD4C549E8375E
-:10AD6000B76478D3F15CE096946ECB18D8E9CD96B1
-:10AD70006E3D3A7B8FA0D93294FCEC96E63433C614
-:10AD8000A1A3CC0E33DE37AAC72C1DEBB1E3F07DB7
-:10AD900093648419EDD36DF20543A3E95CA897CEC3
-:10ADA00011C13A4A318E1DED98497FEFB1F93DFC52
-:10ADB0009B4A181F77ABC2FBF6A5F0F3D736073FC7
-:10ADC000DF3A36791EF1ABC0C5BFDF57D023D615A9
-:10ADD000C0E952F9777CE6C33FCE17EE2740EF95E6
-:10ADE000EFFB0C651130F2CB00AF31F2C7702E7162
-:10ADF000C561717EAEA5F37D9BBF8AB8628BA83B0F
-:10AE00001C1171C54722AE3828E28A15863AD0BB9C
-:10AE100022AED827EA40AF8A7ADE7E51CF7B5DC46E
-:10AE200015F2FCB5948BD495CC694B60ECAD999C34
-:10AE3000CE692BB54019ACA3740E8753EBF8FEE82E
-:10AE400015DE064F4901F65B5CE3601DA9950D63B5
-:10AE5000701D69556DF49E52A5D7EA746BF87ED2C9
-:10AE600013F45E947C2FEC164E1A76D39CB1647F5B
-:10AE70006FF18A73C77A6B21C9D7A316FA4E92FC79
-:10AE80007E5CE51CF57B4AB30CF4BDC9005B356EF6
-:10AE9000475E93741FCC0647D23D4D8C8DBA459CBE
-:10AEA000E7C597AE3AD1973582EE922ECD574D88B1
-:10AEB000E3EBE0FBA13631CFA1E21BE2709EF77A13
-:10AEC000F0F9A60A7D30CEB74ACE27DEA78916FC58
-:10AED0007FA8EFF9CF9DBEED63CA39D3B7057F3A9E
-:10AEE000E62DB9DF82DFD3AE0CDED713F525FC5E8D
-:10AEF0008D3B8EBFBF32E9CF99C0A755E23D0469B3
-:10AF000057AF13FA6B7CDE7BBEF3BFBFF35EC90C99
-:10AF10000B7E0FFDDAE02FF8DF0336D7A6469EF74B
-:10AF20007D0FF1035B79EFB53FA3BF2319CAE0F2B0
-:10AF300060BBC6E6C4EF0C5ED1C3BD1CE998DAC3A2
-:10AF40003546D447C99FD9043EA698B55A0A8E1FE4
-:10AF5000AE91DED65F3581CEFF5D770D3F27F1FFE5
-:10AF60000010785941008000000000001F8B08008D
-:10AF700000000000000BED7D0B5854D7B9E8DA3320
-:10AF80007B1EC0A0838A1912B003A819531F230F78
-:10AF9000051C70A39812436410548C8803A2D0D669
-:10AFA0001892A6B7F4D4731804110951D3A63DDA48
-:10AFB000F818CDA3BDB9DE9698DCA64D73CE21C698
-:10AFC000A4696F12B1471BED6D0DBE92F46BBF1EED
-:10AFD0006DD236A7ED77BCFFFFAFB566F6DE0C6825
-:10AFE00052D3263D852FD9AEBDDEFF63FDCFB5B967
-:10AFF00072057EE633E6606A78C8C7F0C77245819D
-:10B00000FF4798579D83EFF18DA19E5DC9C4FFB79F
-:10B01000B26032BC0F7EEA176C266335ACD53F00B8
-:10B02000EF7BF3B454F774A8AEB35D187232E683C5
-:10B03000DF2B59D047CC239F354CA57A39DE920AB5
-:10B04000682FC767349FA17E6B0FF33AC642E14F6A
-:10B05000B0BA89D05FD46D55234E9CAF37F839A76D
-:10B06000E6622C2BDDD2E080F554666C5ECD264086
-:10B07000832A877B0AF60F2CFA796E1E3C7DEBBD86
-:10B08000B83D6CD70CED4E4DEBCEF04E8FAD6BEB6B
-:10B090003656128279B666FC0FCFFA646CF7BBF6AF
-:10B0A00010B6B3B1DA7E18BF77C12FD3335DB1F6D6
-:10B0B0008766954EF3E7C380E5A98CA53136D51E8A
-:10B0C000CAF24F1FBE5FC6C28C41938E9244C660C7
-:10B0D0001DE71B948803D655DB07F01B83F5975AB1
-:10B0E000F07D439FC3DB8B0B649AEB0ED8E77ABEEF
-:10B0F0004DD630A52B7F009EEBFB9A2BA8FD2EDBB7
-:10B10000398497137E11BE19ADEAB928BCB03DD37E
-:10B1100095711E53D98E73C07A17F89327BCF949DD
-:10B12000F8772ECBBD62E5F847F8D68AB6090DD57B
-:10B130006319E2D303C02C1CBEAF95EF59D9C07878
-:10B140004604C3F263EF4F37652786B01FD28D5395
-:10B15000D0D52CF8BF9779ED7310FF9CAE6A045DD3
-:10B1600079197B9EE82A6C0B47D709FB62F7D962F5
-:10B17000749765188FE17A97EBCBD45F3B3919D67A
-:10B18000BF9AD15C6C75A085C3EB3E4E8F4E78297B
-:10B19000C689D11B8C1334D11FE16BA258278CB305
-:10B1A000ACACECFFFC1060F6E8CEAC3B104FCBFE35
-:10B1B000D1CAAC305F3534C37275AD12894079792C
-:10B1C000E056E287E5FAF1E17D4D8DED821E3F6F9D
-:10B1D0006CCAA671D694F371D826DDFCB4BE9D046A
-:10B1E000CF20635BDC3A7A7B33934D6600C7E77709
-:10B1F00037EFC3FE171F7430A423867DE720DE39A6
-:10B200005C4F02ED22FDBFB54D891C84755FD8ED02
-:10B21000A075BEB94E8930C43F733F3E00EFBBFD01
-:10B22000294497171342FBBE08F58D5B93FC61D848
-:10B230006FCFB8D68D4198F7624AA81EC769DCFA6D
-:10B24000494B18DAF724869D59386EA3D57F10A68E
-:10B2500058A9024CC7C113FE7D133C1B7A74F883B6
-:10B26000FF8EF9151A7F898585FA5DC3E9C7319B81
-:10B27000D723C01DBAF52FC9B2D07A4F3DE4A0F54F
-:10B2800026CCF6123C1A0A12B484318847A6A93992
-:10B29000B09E746D12AEF38202FC09F4767E9912B0
-:10B2A00046F83095E3C57ED38D07909F1E15FBBCF5
-:10B2B000F0C0DC4948CFE75378FD394F6204F77599
-:10B2C000CECBCB618F2BF218F2861AF22D4FE6FB14
-:10B2D00050800E1AC5BA1ABD162D01F0DBF8D08ABF
-:10B2E000CF229E1B3D7DF7E0F36472385981FE6FDB
-:10B2F000EDB6328437C2C39983F545CD586F86CBFE
-:10B30000257F16ED07E1371EE0F6E6AECEE410EC41
-:10B3100083B959C83E310687869DCF7C419949FC47
-:10B320001CE6FCCEF94461BAF318E877A5D71E2EC7
-:10B330008771D8D1C944B72BDD9C6EED855B52B3C4
-:10B34000783357943EBC54EEC3F3BD51941B906EBA
-:10B3500001AE2B915F66223CC6CD1980F7B54D46F4
-:10B36000BADD3261F303D5B0CF7505366685FA755F
-:10B370001ED5C037556D463E827D1BCA636633DAE3
-:10B3800077CF38419FDD9C3E81D2270567C4E862B4
-:10B3900097DF42ED7075B651E06F86EBC70D0EE793
-:10B3A000905E41DE9CCFF0EE2B24B900F4C3D7C5EC
-:10B3B000AC3A7E68E87110DD33200F8413D0A7BD4E
-:10B3C0006A468C5E247C1A7675103D3608BA6BECA2
-:10B3D00003FA19A3A32313BC70CFAA9C273B46678B
-:10B3E000541F87CEBEE767C44792FF1A58B09E59D4
-:10B3F00087F3B57C129E8B109F9FA90DA7E3286150
-:10B40000EABFA3A4682CD1BBC007173DF4E344BC3A
-:10B41000254BFC84D9093CCF5DA2D2DDA69C2E032E
-:10B42000796315E7AC5D1B8C0CC0FB94362BBD47D4
-:10B43000F9A2427B9C9621C29F9BFBEDA9504E1026
-:10B440006597C0ABD5EA4A43782533A3DE338E999E
-:10B45000E4899FE355CAD99D369686E7718238DF25
-:10B460009B17652BD86EA7A2907E602F33D281D513
-:10B470002407BCB32DE2BC0BCB738FE4ADDDC9F761
-:10B480009B906621BEF86D3A085425060FBBD8FF85
-:10B49000B8016FFF00D4D77B9CFE0894C73337C92F
-:10B4A0008752986940376F4D45121BD0E179917BE7
-:10B4B000BCA1FC29CF4D86F6B779B30DF5B7FB3E9D
-:10B4C00069A8BFC39F6B28DB994EAEE33A8738DC8F
-:10B4D000ED02CEBA7A299707118FD5621F3BEC2176
-:10B4E0004F10CEE16ACF7A92CF1D259FF10CC13E5D
-:10B4F0001C1ECE7F76D42761DC84294D6ED2238436
-:10B500007C2E805FC443270E9216A333BB09CE6600
-:10B51000FE33EB930DB385DE730BBB85F41ED7B8FA
-:10B52000B8FA8D597F031961417A4D14F85A647540
-:10B5300091DCD85A03FA9C82FAE552AE2FF9EE2636
-:10B54000BC06453B16B690DEBA5CEC5FEA5FAFB571
-:10B5500033367033C06301D7B396175CAA41FA340F
-:10B56000CFDF2BDAC97262C1014D8B234FDB057D22
-:10B57000250578FD722753510EC9FAB090B7CB85D7
-:10B58000DC5E027C8C745B894F9DDEDA27C6E98B1A
-:10B59000D22B1BCCD1F3E9214545382488E2011692
-:10B5A000EA9B9D8A700E5323AB2BC888BFFF04D043
-:10B5B0009D437A0CFD94CE6EDAFB79A05F474DB2C5
-:10B5C0001F6D0B87D6F0D857017E8935497E8B37A2
-:10B5D00046EF64774079828FD37B6DBAD34FD561C4
-:10B5E000EDC4E43931BDAC46E877A9AC95F8609874
-:10B5F0001DE3E47439B21DC3CF1F399F439CFFCCB8
-:10B60000BAC94F7417E4E7BE057E91EE96D51AE9E4
-:10B610006A4568743AFB96A4B3B96C2ED159680395
-:10B62000D18543B4D93109E885C389E82351C2578C
-:10B63000E8DB36950DA880A763887F58A4CBC69217
-:10B64000719F83DA0BC417833E66D3D3413060D534
-:10B65000223A3C0E16B24437C897411BCB7810DA19
-:10B660008DD1562C76C3FE064B1DC90D74A8460C11
-:10B670007AFB3118F7AC8B8DA8EF9BF9612AFC039C
-:10B68000E5C0D68C373DB89EAD3646E73D0B5FAA88
-:10B69000D5A0BC5D96D92F6A4B61DCED09B2FCEEFA
-:10B6A0002EAC7F3C91972F3FF9A75D241F805E1140
-:10B6B0001F49021F49527F9FAE832BE0C13921876A
-:10B6C000CE19A709DE66BD5ECA09F3396C9EF74D37
-:10B6D000139E46DAF7B0F50269DE323A5FFCC76CBA
-:10B6E0009297AD06BE183ECE00E9EFABC4BE2D4921
-:10B6F000CF6584E2D89151F86FB0FD4A6F2F009C5E
-:10B70000BFABA0DEAB41EF398C8B0E18472978E92F
-:10B710003F51FE2BBBC2E3108E56688072DEC642DC
-:10B72000B41EC9AF0948075684FB00D583FC1D52DF
-:10B73000B271903A37C24581F6571029D77A4E96A2
-:10B7400073B9B6529C7F9538258C57D9C34AD13EE0
-:10B750004F58B7F6E03694739A03350A787FA914E8
-:10B76000D707F59A839E9734C41BD0B341EE3C5F54
-:10B77000F287B71F817EDD8356BF03C6ED0E3CCB3B
-:10B7800050EF7E673AF3E3A6BBB021ACAF3EE45E78
-:10B7900064F722DF0C9CEA9AC2D8D9763658661B29
-:10B7A000BEDEC12309762F6C36144E99F9348CD342
-:10B7B00053E070A33EF7C626AB1DF134B8B9218C17
-:10B7C000C0389D16EE57E07D8F1A6268DFDB377553
-:10B7D0002E42BE3B6D0BFBC7C1B36773F82EB4435B
-:10B7E000346F457926ACFF608F5A1E89733E6FC84F
-:10B7F0005188DF5E7BFED3B4FF6369767F028C3BAA
-:10B8000084FE0DC0DF31DBCE0C3F8EDBF1950C1CCE
-:10B81000FFD8BAADFE23B0AE631D0EB4A4D8B1DD1F
-:10B82000CE5A1CF75871B367BD6E7CE74DF6567C57
-:10B830003F78A3DD9E4DFBB99CECC1FD6CCA1D8F0A
-:10B84000B4D99D669FB416EBD73733DCAFDDB3D3E5
-:10B8500086FB73AA6C179E2F9FF05C7A752EDA4BCD
-:10B860005ECB9C4F41FBCFFB43B7E6001E57B69D16
-:10B870005D8472C95E96B2059FDD629DF2BC92F84E
-:10B880001D4A6B74E239D6DDB496FB613C9606C264
-:10B89000639A2588E75177609D73EA74FEBE79CC80
-:10B8A00070B874A3DF6516AE73BD67FD0C6CF7BB93
-:10B8B000F610B41B2A76D4C68363630E9763CECE8C
-:10B8C000E6AC365877F76EA71BE1D3AD847635002A
-:10B8D0005CC3992EFF63DEE1FDBE25FA49FA003C08
-:10B8E000111F6E387CC3EEB08AFA2AC723C0C5691F
-:10B8F000D3C9CD43B34A9B111E51789BE74DEB262C
-:10B9000079D1AD70BEFED6E159BBC3509EE90FDDC3
-:10B910008DFD8EF500AFCDA27D4E427D7F24FE19B8
-:10B9200012F5DD1DB0EF38FC3FD46465378FE5CFED
-:10B930001BE03975B3759212073E43C56BB3D04F08
-:10B94000750CEA2D30CED06E277FC2FB2CA4AF1130
-:10B95000E873560E97F7BE99C12D39687F4DF7935E
-:10B960009FEFE5D9C1AD39A407B47AB0FC31A0DFAF
-:10B970007D1F11FA65EC46A4D7E9BBC3609232F78C
-:10B980003883DE3AD2F91964432A9EC71D257F68A1
-:10B99000417BA07786DDEBD0F905A51EBDC4C7E5C8
-:10B9A0005B70CA853C38B959F5F4F564DF80BE4C4C
-:10B9B000FE4137FCC6F30F06D11FA893874B4C6599
-:10B9C000A99FBE94037211CF7DA127A77B7706178D
-:10B9D000A0FDF18AD51F01B86560072857552811C9
-:10B9E000D4D73B4A9E203D9E093D6E8958E74FDBE8
-:10B9F0009DAC6C0A8BDA732BC5FBA496B38FA27D2A
-:10BA00009D84FE4FF4D7B638BCE47F41E4C3FCD537
-:10BA1000627FD2AE233D12F6B3B245F841D9835CC2
-:10BA2000DE5803F9480FB00F835D1264263BA4C9AA
-:10BA300066B0E75699F407B3DD506DD21B76A0EEE1
-:10BA4000847AA1DAEF447A7A777ACEB12C2F5587AF
-:10BA500007A47E0FED420527B60CE9CE9F1342FEE8
-:10BA6000FCB85D3B8DF2684BF011E710FAADD5885C
-:10BA700013E5496FF9E79291EE7AEBACE5486F83F5
-:10BA8000EDE5D4EEB5F6203DAF08B951E1D77E4FD4
-:10BA90007C29F4B3EAF2D2D35D3ABC5669B79DEE85
-:10BAA000D2ADBFB2A0CA5096F4556965ADFD71CE56
-:10BAB0009759B9D2EFA231833E6A3DE40FC5392FC1
-:10BAC000E43391A9EFEAE1989C2BE846E853F74F5D
-:10BAD0005F3076347D46EE53C247EE5FD68FB4DEDC
-:10BAE000DFE55C9FF566BFCFF59AD719C5D308EDA2
-:10BAF0002BF1108373E077873B56A25CA8F0877226
-:10BB000073010FD565CA96F140273F16FECA1F077D
-:10BB100092236158CF8B3EEEFF4C6CE17665625903
-:10BB2000D5223C9FDE2FBEEF2C50883F6B024A444B
-:10BB3000837FDE2AECD59FFA18C51F805F5F4D8694
-:10BB4000F2EBC536EE47665AC51D7362766A621D12
-:10BB50008F4FECB033FF00F69BE6F26F86F7CB25F4
-:10BB6000FFD51AE310353536C33953698A3B249A19
-:10BB7000CE99A512EE7300EED931B88F647F8C4454
-:10BB8000274CBD94877E31337C369AE063B6772AA2
-:10BB90009F33F1C735DA3D077BF25E9C807A469988
-:10BBA000E29F82F8C32AE897A83D49E1905EC94721
-:10BBB000C2DE93F1AA1D4BABC9DE7B0DF581B1143A
-:10BBC0006F9A84FE6A39BEB4F366FAB5FB725347C6
-:10BBD0005EC709D16F6B557C3DE104EA09B3F8F308
-:10BBE00006784E5DBA30239E9E70A250E809508FB1
-:10BBF000FAC189DDE5FC5968D4135879EE55E0D2D5
-:10BC000041FB4D989237361EDF1D9B157A30570742
-:10BC1000F7245F2B2BD3C17DFD6CEDCBB8DF2AE180
-:10BC20008790F3817C3FAAD7C3CCF33D95E316F60A
-:10BC3000C6789217F27935FCA9EE56867476BF4D18
-:10BC4000AB457DCFEC4F3A9CCBF5C49E2CAD05EBBC
-:10BC5000992BE72AE376487FB56FF6441E7E20BF16
-:10BC60008FC91E94F6D301ACCC8FD985AA9BDB85F6
-:10BC700089E9978EBAA1AA3937F40CC2A3F85224E5
-:10BC80006C01BE735428A43F39D219E93DD76C87A3
-:10BC90005D63BB1E646AA0E7AD8DDC1F5F3A5BA5E8
-:10BCA0007262C87A90CE05931F2751BB4C76D8128A
-:10BCB000D00384DF86F4A953429F0AB256B2F75CE0
-:10BCC000B68813FD1566BF4D6DBA65602AC8F5DAF2
-:10BCD000824B35DE99D4DFE0F7A9F5661D4D15F5E9
-:10BCE0006E782E09723FD072F403E1F835919E2CE4
-:10BCF0008CC3F955BFC6B89D87FAC58AB55F98F160
-:10BD000035EFF5F30349FF92D417A53E03F2A5677B
-:10BD10003CE265A1E225DBDFE42732FB85A45FC6B8
-:10BD2000EC3F32FB8BDECBCD247C48FD4BFA7F7E93
-:10BD30009F6BD4C3FE0BD803DBF516C2910AFCDD62
-:10BD40006B63193BA773FF0EEA4BC74A7FE046FDC2
-:10BD5000E2BF4CFDAEF57CEB8673E83C9EAB2F2436
-:10BD6000D850DF0E7A42E44F5CA218F9242D4FF828
-:10BD70001BF35C7C1E1147EE6E6F93FDC3286F8230
-:10BD8000E9F64882121B8715E45F133F8D9DADA530
-:10BD9000E6E5933D72431ED2B31FEC9119688F08FC
-:10BDA000BE2F48A5FD302D959DD7C78DC5BAA3EBF5
-:10BDB0007082DD32E3FDCF3F218F19E6B91ADC76C0
-:10BDC000941439EDE88F001C5B395DB9A3FEFB2CA0
-:10BDD000F4EB6CF0EAF58A7A8C5BE4A2DEC9E31A34
-:10BDE000F2BDCE7FAE22FD26A687B4609C73F5CE51
-:10BDF000BC689C8CE2A751FFBB8F51BC488EA3321C
-:10BE00004F07F101F2AA5C8F358E9F5EACB749F007
-:10BE10000100DCE9009259BBD3CA785E02E713192E
-:10BE20008F500B83E599B0DFB5DB148A1BB370ED3F
-:10BE300051D4EFD7897ABBF0BF99E348EB441C8615
-:10BE40005937909ED6F49031BED6D8672C9BF572A8
-:10BE5000E9EF576191B8EE7F403C713844ACA3C321
-:10BE6000E100EDF36F140E920E2B723FEBC1BC9606
-:10BE7000EE84D0AE068C6BEF75923F846C48E497ED
-:10BE800001F885FD6CDB53F008EE675B9E95E0D70B
-:10BE9000ADF03C97A3695F730EE9E86D9BE0F35B3F
-:10BEA000F2BCDCEF82E7128844963E81F848E6B5A2
-:10BEB0001C4BE37AA53DC0F5C643938F2CE5715723
-:10BEC0009EDFE20BC4F25B4A013E33047C7C539A52
-:10BED000FC03F09C116826784C7FDA68AFDEEE3305
-:10BEE000EA953EB3BD6A2AEFCD8B9FD7128BB3097B
-:10BEF000BFBB58BF99AFBED9CEE32D4F80DD8ACFEF
-:10BF000043ED6E7A7EABDD43CFFE762FE96987DBAA
-:10BF10007DF49470BFDF16ACC7B896F4434AFFF8BF
-:10BF2000F7F3B8FDC6027C1D95622F8BACE9C908FA
-:10BF3000E7E301AE178E74BE54971BFDA0CB82C6FB
-:10BF4000F8DE8A5A637CEFEE99DA73785E26CDF4D8
-:10BF5000D842BA78D43AB1FF1D5FE3F12639FEF139
-:10BF60007FE47897E58B62FFAF0ABA483A9266F3AE
-:10BF700002B2AA1EAABA15FDF6CC9D734DFAE0498D
-:10BF8000C197499BDD36F40B550DACB4E338EB7625
-:10BF9000C138AE6B1F676BC6C40C637CE1EE3BB16E
-:10BFA000FFF1687C61E39DA5507F5CC417DE7EBA1B
-:10BFB000F5EB6117D2ABF673941FD63CED0CC2E3E0
-:10BFC0006D719E437908DFCB32FCBC9C3271543FCB
-:10BFD000FEDB79F9C3FDF8D6854A6BBCBC96CB79FC
-:10BFE000513FDAAF496E39A37EB44BBCCCE5919A90
-:10BFF000CFE7EFFC296BC1713A9F652D87E3E8F32A
-:10C000007FCC53E478EFE591FD2FE560F00FF1C6AA
-:10C01000B33AAA2621BC2FDA785E8C793C35DF2E24
-:10C02000C7B3E463FFF4E8FAD47CDD783B00068311
-:10C030008827D59D4C714D7617C53F251D25D5BB4D
-:10C04000EFC0BC05302C199E2F49DF71DF91877E30
-:10C050009C9F64FB1F6323E3F51782BEDE12FC7511
-:10C0600011F90BF8E8BCE0AFB3C85FF03C23F8EB84
-:10C0700067ED7E2AFFB4BD80CAA7DA352AFFA4BDCA
-:10C080009C9E27DA83F4FEC7EDB554EE6E0FD1F314
-:10C0900078D923B7E2B9F3DB6F2A248F475ACF67E9
-:10C0A0001EB51AF8A7654F9281DFD63F34DE506E79
-:10C0B000EA33C6CF1BBBB20DE5356DC6F8F9EA56BB
-:10C0C00063FC7C55CB3CC37C2B430B4DFC7CBB8978
-:10C0D000DFAB0D652D9FEB89D5E5AB0CFD1C9E46B6
-:10C0E00043BBA4A52C140FFFE5F99C3E8F94148D3F
-:10C0F0001D1AC5CF616FBBFDE7A89F44CB6A88A11D
-:10C100003E6F6F5B42EFEF4FE0E79DB95F7D3E3FD3
-:10C11000EFBACB9A820B18EA458BAD7ABDE7D3B361
-:10C12000424BF375F6A0DDC3EDB17726D7583D40FD
-:10C13000474BCB2EBF7803D051689091DDA381BAD5
-:10C14000E7013DB8A0F5C1853740B9267C8FC17E97
-:10C150002C6A79F205605F16283BDE3901FAFB672D
-:10C1600087EA71FC12CFA517B0FF828AD92A92F50F
-:10C17000FD298CF4D18B19F6C8C138F4706FBE62FA
-:10C18000885FBDDF73DA1CA7CFF2B152F42367F9E1
-:10C190002E95A25C83B286F1AF43B342F7229FC1D2
-:10C1A0007B0DE5E4FD33D667E1793252DCE86B02C2
-:10C1B0005FD29F20D7B5A384AFE7B8882F0C99E250
-:10C1C0000B3A7FC23FE58FE24FB828FA0D7D35BEAE
-:10C1D0003FE1A2883B5C947187AF55C78D3B5C5CA7
-:10C1E00024FC09508F7E848BBB6BF973D1E87107F7
-:10C1F000B93F388F1EA2F3271A77107ABEF09B1F23
-:10C200009BA5FD33D6AF9FADEDC2E76F6668BB114E
-:10C21000CFC775F14FF7445DFCB3EC0786F8E753E1
-:10C2200039A103F93C6ECDD0AEEA0CB3A1846C8C7D
-:10C23000C70637C6A3E3FF9D2FF5EB813F2B3EAB2F
-:10C240008BA35AAE7C925D731CE09ADB15F0BC1494
-:10C25000B37E9384101917D3FB9EC80B1D417875CC
-:10C26000A57CC7CBF3AF2CB1F30385DF08FA907937
-:10C270003E391ECA2B945B278063F09CD99E72A91D
-:10C280000EED94410137F3F3DFF3DD029EEE0988F2
-:10C29000DF27F2823F267C3FDDEFA5BC36F1FE5A58
-:10C2A000D7F1B83DF873D463BB1BADDE835C6F2759
-:10C2B000BFC5CD819448AF2E1EFC6B3C2FF3D1FF40
-:10C2C0003834D90EF8EE0CBDE0C27CF037F6A898F1
-:10C2D00011C3BE911CB621FE6B7DFC7C5BE0097D29
-:10C2E0006268143E077A186FF1D03A2C96023E2B02
-:10C2F0007F86157C9ADB0FEE7937D50BE37D632FB4
-:10C300008F7FDDBCB7C9D9A81B3F6B0E3F77BA91B1
-:10C3100066F2303EA9443051BD3670F9D5B9185F88
-:10C32000F15AC8CFF1C6A6DF9E5C817E47CD4A7E1A
-:10C33000C73736BD43E5535E4B2EA2EF0DCF6F4E90
-:10C3400062FB9BFF71DD446EB77078ACD994FB78CB
-:10C350006F26C5C59439008753DA3BC9D9D363F139
-:10C36000B3350A0BC6D363D2E670BC2DD65AEFC4E0
-:10C37000752D0E3918E6399F6AD8FA732C7FA354AD
-:10C38000F15AD1AEF7F1796AF7A8944F0BF0D98042
-:10C39000E557FC490CE75D107A52C5F6BF9BA1B08A
-:10C3A0001B94EB0857ED9D54E4C33790FEE2ACFFBD
-:10C3B000D7F2DC147C345505BECF41F81F75E9FD7A
-:10C3C00094929EBE94A765CF21BF5FA825487AEEC0
-:10C3D000D2ABE8A79B799EF6372FA9187B487CB48F
-:10C3E000F546F42F0D5BE708EBCB9BC3E5E46F0448
-:10C3F0005FDCBC577DF536A4E74D36CA43B8252F20
-:10C400003807F115B5B7AEF3B921F3D7060BF87DB0
-:10C410000450A7691E58AF4F8575242889FE30E760
-:10C420002BF2CF39C5F907EDB4B1D06E0DEB1F403B
-:10C430003F1F53B59D56F41F16DAC83E5EB1DA961B
-:10C440008C7889C5CBFC067BC3FC3C8FF131CAD309
-:10C4500070D27310EC6C8C97E00F68E250A90ABDA3
-:10C460007FC6C31AFCF37191577A6FC16D0F8703B2
-:10C4700060675878795DC16D376D862D9D9FD47A40
-:10C480007219ECABF741C5DFE1C5E7815D8D78BF7F
-:10C49000A24DF19743D3FA8169F518626CEE719061
-:10C4A0008E7F6EDB176E457A7DC7C3DC48CF2BD2FB
-:10C4B000383DAF3DC12216287FAAEF418A7B064F47
-:10C4C000A894B726E3B267D2785CF6CBED03B46EDE
-:10C4D000B46B17CDE12636FE8CF3C33AD08F5AA643
-:10C4E00052BC743C7377E3F992A86596727DDA6D5D
-:10C4F000A7384F05635F473F4F1BB79B0B455EA4B3
-:10C500008C63B10BDCBE6D815F9427E3CB8DF6713C
-:10C51000BEC9FE95F2CD1C6F01FA0FE3FB8E3946C2
-:10C52000FB7824BFBD7C3E0D7A04EEEF3B228EFBF0
-:10C530005DD0D7319EF92CE8EBF87C0EF4757CFFCA
-:10C54000AFA0AFE37300F4757C1E017D1D9F4741D2
-:10C550005FC7E74BA0AFE3F365D0D7B1DF8F405F94
-:10C56000C7E72BA0AFE3FBA78BF9F9D73DC51ED9D1
-:10C570000CEBEDB6B19F215D854B455C58C4C9B647
-:10C58000A54CA5F3DDF927A072D0A70695D06710BA
-:10C590001FE10C27B51B4CBEF4C7FFC0F2B64CB26E
-:10C5A0004398EAFDEE10F4EBFA62A6BF178A3D76D7
-:10C5B00046F2FEEC71E656409F796B993213FDA866
-:10C5C000E7EF50FAB13C788742FAC45464BD9CD876
-:10C5D000395AF4AEF7209E679DC94CD0E3237BB552
-:10C5E00074E88F6B237A1D5B8F76E97C872CBBEA1E
-:10C5F00035A0CFC63645D8A9EE7D48BFDB14D93F5C
-:10C600006D2FB6EF92FD45F98445F6FFCC1EB4B709
-:10C610004F46E76B5885E39DCC92F54D75583E1B10
-:10C62000CDAB2B5E8DED07A3E3E7EEC5F2F90C3938
-:10C63000FEFA5554B6C9F2E3D4FE7C2A6F7F4B71E3
-:10C64000EA7EB49BAFF7789D217EFEC139A6E9E36F
-:10C65000399B8AACE67C70F2BBC938BF25C935E589
-:10C660005AFCA5BA383FF94B613E1BF2D9E74B5350
-:10C6700026A1DC3D9BE18F6BA72C2C1AC17FAA2938
-:10C680003CDFDECD42981F9F28DE27F6F13C7ABBC7
-:10C690004F1D96477F2DFE4499F720FD89B54DA388
-:10C6A000FB136B4B8DFEC435A27E247FE21A933FB1
-:10C6B00071E526531C22F4FEFC89756CC086761841
-:10C6C000D314E2A33A77FF8B13D1DEBFE0257F229C
-:10C6D000F3BE4CFE56797F02FF6F9983F7CD78F950
-:10C6E000ADBB140FDA15BD772913F179E62EE546B7
-:10C6F000E4AF0B77296EE4B7CB73F93D98FCB7FD37
-:10C700002F7BF1BCF558FC1C1CC17FC15045B029E2
-:10C71000C5DB0BE39CBD4B1987FD57DF9769477A53
-:10C7200000BD53D023DB83FC624D520CE5BC499223
-:10C730001EF73E8CFC317FBCE497657B905F4BED30
-:10C74000B27F3B95578614D1FEDE3DDA64E0AF053B
-:10C75000B2FD843AAC5F962DC7DB4FE3CF4F92E535
-:10C76000AF12FFF544C7FB5F34DFEB2821A9FC00C3
-:10C770008D575A25E5D9742A77D7C9F15BF7625EE0
-:10C78000EC2A8BEC7F1BF1FF5A26CAA8BFC37EFFA1
-:10C790009F381FD6CDFDE32AE4A73BA3F57F7C1885
-:10C7A000F9AD4E949B9F79620FD6FFCDEFEF2F3CF2
-:10C7B0009FB9BC9A0D2EBA212FC617E673A5AE906D
-:10C7C000EB9D052D4FA2F86275AD07ACC88FB1B8CF
-:10C7D0005A5A4D10E9DB69A5FCB9A087DD1A2F9FD5
-:10C7E000FF0F73F9F9F485B92E83BC1E39BE167F8D
-:10C7F0009C86423E4ECF0216D7CE3D346BC1E6B981
-:10C80000F931BD0155443B3C4BE06981E77B334244
-:10C810003D588FB20BFD30D2AFBD44E41377947C0A
-:10C820003DB800EF2F15DAFCC21D3EA88FF7AAE233
-:10C830009EEBAA053CCF2BD4EB207BADA647E49121
-:10C84000585D148F506FB21FA0B89988A78630EF3B
-:10C85000388BF2BA46BDDFA19AE2A89D62BFA5B3AC
-:10C86000DFA538F5DA5778BEB08C63D78B75AD4548
-:10C87000B90CEB6E6C522216E8D7888207E3BA3EF9
-:10C8800016F166C6E2CA2BCBD4013BDE0B13F7339D
-:10C8900098D087A3F1F01A6F3FE6C7A85A825FC30A
-:10C8A00079D84090F2E2305E94C9A2F1672947AA94
-:10C8B0009A6FB80BE3D43AB94571EA44364C6E909E
-:10C8C0005C88E63589387A343F47C801199F6E1075
-:10C8D000FB5A1E9503154B50CF4DBC5FC4A945FCB8
-:10C8E00059C6A9AB4CF7DA1A030BC7903FD7AFFA7A
-:10C8F00029AD26DD789F29D18487A945FC5EA58CCA
-:10C9000053BF32D7186FBEDFC648EEF66419E9AEE2
-:10C91000A488DB3D9F2C927EC8C48104D4BF999328
-:10C92000EC905EF4E78CE5F6085DE632F975D4B676
-:10C9300055E47FC47A05E850F1BDF49F2897B15CB7
-:10C9400004ED55BCDF82F87059C81E95FE1F545384
-:10C9500016E5901FE8DC5CCC0369ABA771E47DF6BB
-:10C96000C713E3F3C7AFE74A3DA1DF86ED56795E13
-:10C970003A85F3FDD97E20618745F5182FCF7F4991
-:10C980009DEB9571091BBFEFC76C4B6790BFE4BD72
-:10C99000B9E41FEBF7E23AE4B9B4EC7B4FD1397656
-:10C9A000ED7170DEAFA1F0DF5685278C1CC7981A99
-:10C9B000E078F2CD0C3A3064CE26C8B883E6C49055
-:10C9C0007854CEE2460A0C72B6AEE5BF819C8DE982
-:10C9D000FDDE3A1CEFE3B67EA0A70584D772EE7F9A
-:10C9E000FBB8ADFF07F9DA4AA4C30F7B9EEFE5075A
-:10C9F0009B719EAD8A56EBA27B31CCAF8C1E2FDC97
-:10CA000088EDCDF1C2ABF931FEEEB718DD6FB1ABF9
-:10CA1000E0A3E9B7F832C00ECF6BE0A743C44F01E3
-:10CA2000CE4F7FEBE71FECF747B8DFAD4A7F24D14D
-:10CA30007AFDFD064FE4855EC7F1A7A63B1B509F1C
-:10CA40008179BCC87F517F08AEBBC0E00FD9D3F25B
-:10CA500021F843609F6F115ECB385EFF06F0A6148D
-:10CA6000E27E34AE47FC0DD2654621E2B09FEFEF87
-:10CA7000AF30FF0C9AFF10A797287C849EA4834FA9
-:10CA80005DCB5F073EA5B4BEEFF2F57D0CF0B98239
-:10CA9000E8D5CFD77B35FB7BC35CAEB742BF7AEA24
-:10CAA00097C7E960A3D0ABC12E5F78833766978FB5
-:10CAB0009DAD3516F2F87353A121CF545B87E55134
-:10CAC000ECE64F17A68E6A37DF8DF51F17BB798FFF
-:10CAD000805B2C6E13A17B7120C129BE5C2FDAF61E
-:10CAE000B6552F9E867935007F2C3B703F56DD7EF4
-:10CAF00032546E6F9BEEABC9EF1DC87DA9D6BAB19B
-:10CB000003DE183C5F1BD36AC7FB50CD5A4A37DEA1
-:10CB1000BB5DD87599F206ED9AC38B76E1273CDEB2
-:10CB20006E8CCB566B7CFFF61637DDEF93F7DDE4AA
-:10CB30003D94E681692FD9F1DE1CD82F69307E65DE
-:10CB400099ED9C7EDF0ED3BD14D5546EFB59E6F6ED
-:10CB5000A3BAF6DF284C36E437837E534EDFE9E88C
-:10CB600052DC22CF97F2329AC5181D25772E46FF48
-:10CB700025E8715E84C3C29D0F0E623CCDDE65A5C3
-:10CB8000D8F9EFDBBDDB8F024B25ECB592BFE1B7E7
-:10CB90006D0AFFDE47058FE3AF15717C66F23348FF
-:10CBA0007FB88463C2033CFFC35E70B68CEE37D699
-:10CBB000AD1BCCE7B443FE0695AF8CC9EF6F5409AB
-:10CBC000BAAA0F5CEEC27ECB3D1643FE90D91FA1E0
-:10CBD00032739E3CCFE354359EC7A9FA789E7C22DF
-:10CBE000D3E87B1D895BAA099F551ACFE304254929
-:10CBF0007C778BE3A532700FE5F998FD088E02A3D0
-:10CC00001FC24C97667C9C36E1E33195DF4FEA3ECC
-:10CC100061F587E175F7434D3DE83F0F3F64213FE4
-:10CC2000C605991F028B447FFE0A16852FE9CBDDCE
-:10CC3000AD3C5F40E265C54E9E3742AD0C7EFB7455
-:10CC4000A6FF8EC70AE157B893F5D37D87D56CC888
-:10CC5000867CB0065DE956F4C778E9B99685B730A9
-:10CC6000825FA82713E67BAC75BC1FFDDA0337DAB9
-:10CC700052DEF4713B229EFE1A8BD7AAEC4D9D9F8B
-:10CC8000FFEF7EADF7EBD7B286E97EA9C71E99A26A
-:10CC90005CDDAFF5238C4BE8FC5A17768AEF6D8884
-:10CCA000FB1683B6D6493B5DD8CE4BE7E5983D2BC6
-:10CCB00016231D1CDBFB03B7B8FFBA69E2E8DF856A
-:10CCC000C8298A934F7A7C2EE379209943748FFA8E
-:10CCD0008CCD98971BF51305ECC22F139A57941A15
-:10CCE000D38F993B9AC7595C44FE237E5F5BFA99C8
-:10CCF0009A73430BF07DF125410F154A4481FD568F
-:10CD0000BA9417156F6C7E66CEA3FF7B3C8CCB0963
-:10CD1000840FE63325F0BCDAC14C567B380E7E26F4
-:10CD20001773393A383B3EFE643DE827F716A57283
-:10CD3000FB690CF72BFCCA3EBA5FE18BF1E846E2D7
-:10CD4000F7D07CED4B1CEFBC9C9413EAC0F69DA180
-:10CD500020E5EBBCD567F57620FC075A5F2B80F207
-:10CD6000927FB2BA311EFE61C7F952E7665E539CEC
-:10CD7000EFB280EF99685EF7A67AD4077BA57D268F
-:10CD8000F4C755E3746538928B4EF0F6DF7B76EE90
-:10CD9000BEB03AB2BE79F773757BF1FEADD437A160
-:10CDA000BC1ACBB23F0B574C2A057D766D8B8C2776
-:10CDB00056EC43FD363A5F78F93EB4872ED88CE3C3
-:10CDC0004B7DF5FF3EBB681F8E1794F38717ED432D
-:10CDD000FDF7ACA93D7D9F12C67BFDD9526ADFC825
-:10CDE000E4F8A5B4DFA85F31BC7135F63F6997E57B
-:10CDF000CF523EC1F64C3EDEB1E736EE45BFD147DD
-:10CE00006D3D1FF6F8EFB7FD487AFF191BCF1F0CD9
-:10CE1000839EF65826A651F65B39F369762BD07FB0
-:10CE200091A6D079F45BF48343FFA0CB22E8EE1FF8
-:10CE3000F6A24EBFAA44EEF320E5818C44771B0294
-:10CE4000CF3C6CF4173FB3CAB06EB6B11EFBCB75C6
-:10CE50009FC0F6B0EE551B3FEDC175AE92FE8D70D2
-:10CE6000E75EDC5F778AEC376DDF68F38602DBF71D
-:10CE7000E2BCABA2F37C85FAAF4A94E37DDD98BFB8
-:10CE800012DE4FFE8FD8BAD61BE0F9FC73FB099E69
-:10CE90004177640B9E0F410FA3F3F8CE960ECAEFB5
-:10CEA0008EF2117B2083F8C8132DEF35F2D17DB4BB
-:10CEB000EEEBBD2E384FD3E7E1F9E7E376E2F5DF9D
-:10CEC000379C93B8EF3E2E87241DD5B9653F803F30
-:10CED000C893B55E39EEDDF52DD3AFC7BCDCDE0DF2
-:10CEE000FE8A917E2BF90938C9C43FD7365EA7EB7D
-:10CEF0005ECAA36806B91E2F1F7BE35C45FA336F39
-:10CF000025781648FB9949BD63F13C9D5F8E79A356
-:10CF10007A47C53C32408C7A4737E659CDA27C2E01
-:10CF2000929B1AD4787479403717F3F85AA7C893AC
-:10CF3000CCDBCCD6EBEDEDFF399FAFE71BF3B9DCD3
-:10CF400094DFB73DBF41A13CB1CEBEEC3178DFEDFF
-:10CF50005CBA773BCAB5C14C0B7DA7E08CF8BEE646
-:10CF6000E0171D19F7C1FB53194E3FCAAB53293BBC
-:10CF7000E93B6AE7FC56419FDF7903F959E7570C13
-:10CF8000A35C917EC396EF77911FF0B4979773FFE0
-:10CF9000ED9937F01C633EF3FDCE00E931F65BE11D
-:10CFA00018C1BEE2FB9C45A2BE6ADB535FADC63131
-:10CFB00084FE22E5A7F9BE27FED8F4FA578F95EB39
-:10CFC0005F1EDECEC3863AAE58705C5E768EF05D34
-:10CFD000D85A797FD9A44F5599EE2733F11D54A91A
-:10CFE0008F174D68F4A31D57B4C1A81F9DEB79A1FD
-:10CFF000AF00ED5ABFD58DC7E4ED3E63BDD4C31677
-:10D00000F73C42F628E885867964FEEDEDACBF8BEF
-:10D01000EE857B5F3E6A9D18B35B3ADD55A4A7346D
-:10D02000FBA004FB39F9A5D2E47CD40FFAACF84597
-:10D03000589E7BAFDB07B4B35926D039ED57147D2A
-:10D040005ED0E6FDC6BC205E8EF9E3DBF61BF2E89F
-:10D05000C277AFC172D4CFC956EE473E8AFAC5D85F
-:10D0600052AA3FAF0A3F186BD88FE759CCAF779AD7
-:10D07000F83AEA27634BF6233D05A3E7DF0ECAFB28
-:10D080005BEE16EB613F23F9D1A97179F2DCF7135E
-:10D09000CEE0F781DE6F7BE0CF67893F83FCBC3356
-:10D0A000D7179D88748E117A1DE68B9BF93C39C089
-:10D0B000F3EFCAB4D95DA95EEEBF72007EB4D5D6D7
-:10D0C000D5E83788E5AB14D277D2D68E905F725B05
-:10D0D00080F3EF2BF346CF53592BF254461AA7A9EE
-:10D0E00084E7030C2AEE1A2E97AD0CE572E983D97A
-:10D0F0002E8C4DC976A525FC1C786F86761ACF1B21
-:10D10000B33FED02FAD388CFB8DF63A9A01D75271E
-:10D11000FF5EBDFC9EC9F914977F33BC5FDA27FC24
-:10D1200015E57F9EFFEC57F38CDF151D29FF2120AD
-:10D13000D69F57727DF21F1E4FD43484D710B4454A
-:10D14000FFE0B07C0891E720F32012033CEF4EE6AD
-:10D150004374865B097ED7FD9E8B38FF814EC706E0
-:10D16000904E6BB91C917476749E97D3DFDB7EA2D0
-:10D170003F4977D03E358072A486B72F7A9B7FF7E0
-:10D1800042EA17C9CF0DEDED984C72E8A6805E0E0D
-:10D19000B9A2F722330271E4D0F185DA27023AFB13
-:10D1A00008FA670752E3F69F1288633FFB66067D25
-:10D1B000346EF43EA7360DCBFFDDF320589F39EFD8
-:10D1C000849F17E6BC13A90F36FDEB2F5663DEC90B
-:10D1D00095055A15C713876F54AF1CE27A4E4C9FC2
-:10D1E000F4733BECFAEB8B8D34BFC8A7F910C6DFA4
-:10D1F000A81F5FEA4FF0FE9E802E8FE7A366BFC197
-:10D20000FAB6047471930FD0FF01DA9F88D7FC053A
-:10D21000D6FB30AD57E8FD1F41787E3B90FA915E1A
-:10D22000DF0BB4BE0A713ECF63F2DC7E89DE0FA352
-:10D23000836BA6FFD702BAB8B96EDCE3FAF946B23F
-:10D24000CFA1DD4FA87FC530FE39AD1F7794FE67B3
-:10D25000689E68BB68FFB37AFABC0E7CFE4B3D7ECD
-:10D260003F8473E4F7B4DFC97CFC378BA270FC0306
-:10D27000CD2BDEFFDD4F76553AF71623BC5A393DEC
-:10D280005D837E3DB598FB6743DC3F1B96709F2610
-:10D29000DE0FE17DD2A5F3385DDD92179C5E9C1F09
-:10D2A000B36FA3F6087B781FAE376A8FE040D30DCB
-:10D2B000727E9FDEDE58F82F07F7E17AAD0B79FB1F
-:10D2C0008262F71A94B3E632E82345B49F585EE6CB
-:10D2D0003C2C5F6D5C8CFFE33ACDF17F5DFDA2627B
-:10D2E00063FE02E9AFA0B7391D80E3D7EBAC131A98
-:10D2F000A15C59CCF557D03FE2DEEBAE2C8EFA1193
-:10D300002A8B75F918278256BA1F18D553C209649B
-:10D310004FC5F4A843FB8CF736BE4DE51281DFC63E
-:10D32000E2C3F5629D77D23E26887D5CBD7D88DABA
-:10D330007B78FB38F54DB4CE74BE4EE67AF9825553
-:10D34000170F434EB3609C17FF05E74CA96D593189
-:10D350007E23EA488FE2B542B9718FC4EFF7F7191F
-:10D36000ED43CE7F2B05BD6F2E3E528FF85BF9AE9D
-:10D370005CAF8DECC5BC681ED311E29FD3C21FE128
-:10D380002E81F6E9B4BE365ABF97AFEF4318BF8B74
-:10D39000C6671C3EB52C6C9B384A9E459FC03FF427
-:10D3A000BB9FFA39F9BA6A430AE9EBC126E068C0C3
-:10D3B00073FD0916D7CFF49562BBECFF15EAEF12A7
-:10D3C00076AC3FFE7DD9DDB1B8C96E6AEFE6F359A0
-:10D3D00041FE23DE02A1E30BF13B10B5E27BE3B596
-:10D3E000652A7D6FA1B6E0D252E107A1F8A68C8331
-:10D3F000973E3099E29B896509DC5E741AFF8E4581
-:10D4000070AD83BE2727BF5B2BF332AA98F1FB7266
-:10D4100071E25B067F8BF48B44BF27674D27FBD6F9
-:10D42000BE5FFCFD27D3F7E312DB18F9B71C5DFCE8
-:10D430001EB8394ED5B0A9F5B542CCFB506D149746
-:10D4400035C733CD7F0F63BE93696372281FE5F93B
-:10D45000E2D4581ECA5B7BB25DC88766FBF9AD910A
-:10D46000ECE73D46FB7950DACFDAF5B19F4F141B5C
-:10D47000EF0FECCF0DFE84F0AC6A74BE1D29295A63
-:10D480008A7E8477441EC5D987262C417F54B88F65
-:10D49000DF573827E2FC32DE7FB690B9DCF8DCE2F9
-:10D4A00020789E5D9712C123784C5773057E5750A4
-:10D4B000DAD10879F47F558A7D9AEDEDC402C0E790
-:10D4C0002C6233B2B3CFBADD1417A8EC11DF97107A
-:10D4D000F902D2CEAE14F7F8D796F17BD5E8B14376
-:10D4E0007A90DF0FAC1476B8B4C7077EC8147D1EDF
-:10D4F000C052E627FAAD01C2C0E772F13DC55A3706
-:10D50000DB828BFACD8CD01FE99CDAC3E9846D579E
-:10D51000E9EF5C9DED7B90CED591EE313884BF81F3
-:10D52000E4D8C40FC5CE7795E8CE8F6B386FC6515F
-:10D530007B95F37117DEFF4D8D7D5742DE9BDF9E9D
-:10D54000C2FD283797703F93F929BF1BF17EE5078D
-:10D55000C8CFAC128447CC9ECF2EB936F9398DFA9C
-:10D5600089EF56A4611C889F4BD34BB85EE01DC366
-:10D5700083B83DF6D1F300724B4689E7B2ABE711B1
-:10D58000CCC3F9CCFD2F0B7DA43937A495F0783F9F
-:10D59000D1AD39DE2FDB9D44FF549CF3F673255C3F
-:10D5A0007E9702895A7286DFE77FBD5D3B833ADE54
-:10D5B000C9F6727A9E52C3C998BFF59AB8CF0F8A3E
-:10D5C00016E533C9BC28396E6D5DE9990BBAF3AC29
-:10D5D00072D1A39467D6E93BF8B202EB3C27F2BDC7
-:10D5E0000693BD74CE858FF3EF4B2DAFB9EDCC050F
-:10D5F000DDF9615E2FE6458581D5379470BFE60B76
-:10D60000A58E81F979F8BD26CE874D7D67E93E4C20
-:10D610007D5B030BCDA0BC2915F17B6A1EFFFE428A
-:10D620006581958575EB1A3B5B5B57C2FD3ECD442A
-:10D63000A7B1BCC0167C5F6AD3C6E0DF9F94FE49E9
-:10D64000192F282DF915C5DD065318CD1FF4B00884
-:10D65000C6DD176AF7D88730EEE2F1927FA4A1C445
-:10D660004BEB6CEC3940EB490C5CA6F594AA00EF4F
-:10D6700071C3E12DF9A25BC05BB76F82F748FC5B19
-:10D68000B9484D46F8BE86F882763D826F8EA997DE
-:10D690005CEE38788FF62B2835C0DBE12937E0AD1A
-:10D6A00053FBDC18DC8FC473A3A87BABC7FA2AE258
-:10D6B000F15DC023233CC6CF83388EF8BA99B17F81
-:10D6C0002FE1DF9993F8AAEFE2DFBDAEEF2AA5EFD5
-:10D6D000C5D517DC664FA33880D28FF725D796358E
-:10D6E00030D4F7ED5A0A7DDF4EE26F6919E04FB78B
-:10D6F0005EE0C77D253ABDF303F8D71F27BC0B3D7D
-:10D70000F8C3F6FFC37C4F97C4D1CBFF52F187E13A
-:10D71000DFF3E1E7EECF84DC303FE5B93B627E33F7
-:10D720005BB2A6E503AC43F20DF26D8782F9938AF2
-:10D730000DE92C88FC8BF7D70A7EB105E3A1CD1E3D
-:10D74000D68F67E16EE423809BBD3CD38EFCD3B8BB
-:10D750002793E802ED7F82A738A75F8E9DD367E904
-:10D760007D0BA78BBF76DC07D6F30EADA74EDC2F63
-:10D77000F888C5A56E2A0F3AE6A37F563B40F2E52E
-:10D78000E83CB7944F19FCBB4DEF2F0E5AA4F1BCE7
-:10D7900031190F8D13FFF42A1F20FE698EAB8E14F2
-:10D7A0000F8D13FF34E8EB23C53F99294E6A8E7F16
-:10D7B0002EEEC9A6F8F3629F85BE532DF57E19F7AC
-:10D7C0007CA5E72995BE8B345D612999C3E3A33B12
-:10D7D000857F8CA156A7DBFFA90CFEFDEBDE34276D
-:10D7E000FDDD55FCC17C2C094F900F4E07CCDBB5FD
-:10D7F00088E76556651E36C3D52EEC926B82AB8CDE
-:10D80000AFDB7B94C866240D0F8BE6FFD97578B625
-:10D81000FBBE437864EA800BBFC7DDE81F4FF964A5
-:10D82000663C14F5F0BF4B59E49E437F9752E2BF2C
-:10D83000C8333C6F5095EB8B9337F817C7A777B376
-:10D84000336B147CCA38F64878BC252FB811F946DA
-:10D850007EBF49BE3F95C1E17B7E1A137FFFD4880E
-:10D860004F80BF46F7FA7DECC06665383D14897C71
-:10D87000CC225FF81ECA834FACF060DC2C0ADFF4C8
-:10D88000EF127C3B5BBDDBD13E3A5E66A37C9538F4
-:10D89000F4407FDFF66AF4300CEF7D1F0C7FAB0A9B
-:10D8A0001F5B9819873E3E305EAF824FBBF5504FED
-:10D8B00081371E9FBED0477CEAB7BA11AF129F12C4
-:10D8C000BFC3F1C9F50B89EF53F9DA37E7E7EBF19D
-:10D8D000AC3D81788EF16F98DB312CFE776F0E8B2B
-:10D8E0007C1618E749ECF7D4FCE8384FE1B8D59F2F
-:10D8F00088FFF74E0E9772B95BC7FA5F9C8876DF98
-:10D900000526F235FD2F7BD14FD3961D375FF3E40B
-:10D91000FD0AFF3B3D1E76C022CE578BCEDE3D8BEF
-:10D92000799B60DF9EC6BC4D78FE707E26EDB717F2
-:10D93000F337C7823E2EF23BEB706C9C07F4598C98
-:10D94000CB3335C4F05EFA207E9F65167E9FA5839B
-:10D95000E46E2C0FE31D531E062F5705A4BC714522
-:10D9600028EF261AFFF4840CF14F363362947705C2
-:10D970002143FC53E4E948F9B6595B100A1BE29FC6
-:10D98000E534FE993AD97E47A474BA3EFE591DD1BA
-:10D99000F4F1CDF01D54AE8B968354967EE8C70605
-:10D9A0001E08A11FDA3733F44BC493BC370F02486B
-:10D9B000C3BF436775B90FA21D0EF601D3F247D658
-:10D9C000AB3F2ACFFF0F526BA57D00800000000007
-:10D9D0001F8B080000000000000BE53C0D7454D5BF
-:10D9E00099F7CD7BF39364422621E200415F02E880
-:10D9F000D442187E020109BCF94932B62003048DD5
-:10DA000005E903722C746D1B6CA9B4AB9B81C4989F
-:10DA10000485D0B2DB9F6DB72342CFB1DAB371EB8F
-:10DA2000A944A41DA4555A2AC6363962976AA0296A
-:10DA3000075ADBA295D5EEE929FB7DDFBD77E6CD60
-:10DA4000CB84A0D03DF674389E97FBEE77EFFDBEF9
-:10DA5000EF7EFFF73E972F54185BC0E0E74D1A1A90
-:10DA6000630361F87302B6FDA651C6D8AAC9B25DB8
-:10DA70009934A631B6B840B6AB4D6321631D2E264E
-:10DA8000C6B30403F8579893DADB8DB09998C2585F
-:10DA900068B92AE06334FF6B6B24FCAE6408E65B74
-:10DAA000ED10EDC4CAA4E165EC634CB697527B4D12
-:10DAB000BA1DA7F69D8CAFBF3FF5B09980F1DF99F5
-:10DAC000139F605C03EFA23D7A7CFADF1FFEA7156F
-:10DAD00089CF6413FB3FE8F802BF6346154ECFF9C8
-:10DAE000FD7780EF5A928F031CDF0F207EF7103FE7
-:10DAF0009FE0F87D00F069237C7A009FC2BFFD7A29
-:10DB00002F5419BB71BDBF011DDFA47D9FC6E9B8AD
-:10DB10000CF84789EE20DF077BFF84908F31EC9F64
-:10DB2000C3E77BD529E428D164A2DC9F725AF60DA5
-:10DB3000DA0BFAE57A5BF49066C57F0BE9C9EA1265
-:10DB40003EFE77A97BCD4459A60D3F03F75D8EFFBE
-:10DB50003DF6678DFF3C8DEF72A6E1693D97E85772
-:10DB60000E6F237C33F42608BECF06DF28E82B3A5D
-:10DB7000DC914C58F8C1120F127FD27629F130D9BE
-:10DB8000A501976CEF20BDD959CEE71F7FF8E1249E
-:10DB9000E20FFC3B46FC9EC2F9F78FCE8F3F184246
-:10DBA0005E029C1F520EBF33C7F823CAD9070D5F10
-:10DBB000D83F35744D46FEFF1FD62BA6F5843EBDDB
-:10DBC000D7F1697D147E9F2D49F3776208DE8F0FB0
-:10DBD000EBD45FBDF1C9C8B5F0E79AE6475413E747
-:10DBE000051856CA587C9025B7C39A37B3A4CAC043
-:10DBF00087C58326F34DB3E835FB0AE1E1F23A44E9
-:10DC0000FB5B64FF562F92727D2289F145066FEF10
-:10DC10003ADCA734DEEC9B59782F3CEC7D44D01DD8
-:10DC20000C59F4E46ACFEF0F035F2CF150BA2DF8D2
-:10DC3000B3FAD35F9B847C585D21E7FD7612E779C8
-:10DC4000B558CEFB24ADBB3ABDCE0F783B5FC2FFCB
-:10DC500094E033780D985978257E417197C4EBB1E3
-:10DC6000C303B45F2E5FF2817173E0D9A40413B0D3
-:10DC70001F1FDBB84D35AD7681F5E821F06F77B029
-:10DC8000749BE42A63077A68DDAB8DD7E690E08F5A
-:10DC9000D0D3349E832C986056FC0EF0FDB9CAEBAD
-:10DCA0005BECC23D28B7579FEF29E7B516BE4B3D49
-:10DCB00058E34BEBB7C13CC0775DCEF36373A3F77A
-:10DCC000CAD705397FD86A4FAE9C8EBE5AA2E30DE3
-:10DCD000BE2F19FBF392996D7F2E1BBF4742167F13
-:10DCE000FE9EC787B2F5CC627F1E47BA5BBD252E6C
-:10DCF00094EF757E662401BF8BF85B9C798E0F2BA9
-:10DD0000649FD2FA59CDC7AFDCC59A7BA60D87BFF9
-:10DD100036EC20B8D667D8C61E982FE43ADF14B781
-:10DD2000C0A542BCFF5048A127D07788F8BF95E333
-:10DD3000772CA4D37A21A6310374AA61E5A4329486
-:10DD400083D65FF2F9983FC8561466E63B2BE693FC
-:10DD5000EB1C5E5ED868A5E327629D63214E07FA3F
-:10DD60007FE2E77D9C0EB5E86E3FCEAF16C8FCF2B1
-:10DD700077C4D776A76827DE22BF3690B6437F24C4
-:10DD8000795FE59672F90EE9BF8CD7DF0AFD6F3235
-:10DD9000B110F167CC31CB3AEE0F6407471B37283F
-:10DDA000FD459BD8AF447ABF4E21DEA38D57234A51
-:10DDB00033F1C9C3520AF80FD5EBDBDB05A4042A03
-:10DDC0008D7338FEE84CE3B797330FF0E93CEDCBA9
-:10DDD000E7B2F3114BFFDBA1AC7CE0FCDD719C07EB
-:10DDE0005676C3BEBDB2462D5D0F7CFB2BEE4F15A4
-:10DDF000E507B15CF2F5D7CCBEFC359415CF470AE8
-:10DE0000AB408FD8784770AA3E7C9C37AC4839131A
-:10DE1000FBA43D8274B4A7F58DB77716F3FEBCE77B
-:10DE20009CEB843E1584719DA7047F99AF14D76342
-:10DE3000D38EA6D4B9E05F59FA6738A0BD1EFF8221
-:10DE4000F50722A79C28076B3B14239943EE87E92B
-:10DE5000498798FFA1F4FE8D0F5F43F39A6CAEF0F3
-:10DE60001FF01BF8C4369AB7B14921FDB3EBCBE4E0
-:10DE700030E7DFE4709A4F93097F43C8EF9CF85472
-:10DE80006C032873CFCACCBF56E01D72C60F5D0B62
-:10DE900072D0DEA6E8688FD66D5DD7510E6DA639BB
-:10DEA0008353E17103720AC6B5FB2BBC68075E148D
-:10DEB000EBE17C2ED847F425FE1282631A3CE7C6BC
-:10DEC000361FC1E1EF4E37AB909EEAF8EE0892B5EF
-:10DED000A0F1C923F8BC15CC34C629DB167D3D1E44
-:10DEE00086FDEB9BEF0CA2A84174D63705F06A10B3
-:10DEF000786946FD393606B228170BA6E6A05FF70B
-:10DF000006B7C3FB86A64F2C61950013770E0D7ADA
-:10DF10009018935DACC079B5A1C100E7D945B07147
-:10DF2000CBB73A336DC40DFB3D99FE95D773FBB467
-:10DF30003A0CFCB4C8DD0F057D3F14FCDC0538F459
-:10DF40004DA3090A19EA0DDBE840FEAD1373F5B5E0
-:10DF5000ADFCC88700BF0B0116C4B61BE95333F4F0
-:10DF60009D9AA471FA98E15D3A0ED615FB7ABC052C
-:10DF70006CDD8D306D1BD009F468EA9AA294458E51
-:10DF80008F8F315910E3B640E20106721231773BB0
-:10DF900007018FEB9BDEDC8871DF5AD3ADD7038A94
-:10DFA000776CF4D5625CBBD2147C59E23C8D747BF7
-:10DFB000E01FF2C5953AF76317F279A1C2C6C3FC18
-:10DFC000CBA2BC5FF2C5CDB4D356BE68B6F6D6932D
-:10DFD000E53B7F6481FF4CB8B0F4CC87E18FD96C0E
-:10DFE000F645A0130CC852C4E74287E253CB09CCD4
-:10DFF000C1804E9787EFE3FE8ECD2FA29EAEF56BCC
-:10E0000041878EF831E25FA358E39D167DE78F20AC
-:10E01000568D6CDDDD8D727747BFCADC00D7BE66DA
-:10E020003FCE843F0FCEA709B970147CA34F0338AD
-:10E03000ED8B2AC3F5241F81DFBEB9F0FEF4008CFE
-:10E0400007D03BAA814FB0EEAD865BD7012E7FE1B2
-:10E050009B6DC8A77CD69C1A0BEDDBFC0E96F26478
-:10E06000E802BA13822F8E8B0AADA56B725D4756FC
-:10E070003FF125FF0B11C6D076278CBE2900B75C77
-:10E08000CA6D07DFCFE506DF0FB9AF2CCAE555EE45
-:10E090004BBE4D5EDDD5CE8C7CE69057FB3E246DAD
-:10E0A000FBB05FE37A72AA5FA5F8E8D49ED25BABBF
-:10E0B000811F893D0ED263C8D30E2845F0474A61BF
-:10E0C0001AF0FF76812FFD006E7F7371B2AB3CB307
-:10E0D0001FB7079EFFB352C938D4B88C3D6298C4AD
-:10E0E00042FB36D1BAFDAB8912D4D38FB11E27EAD9
-:10E0F000F59D6CD089F2FF714C0555B48F4117BE68
-:10E100006FF4F85CC8C7FD7B9E2B443B929AE02CD1
-:10E110003E13205561563B697F2227CE48BA01380D
-:10E1200025EDA7C7F4935DF6C293ECB4C1B05D5C76
-:10E130001BF59839FCC8E1D9E60B6807655BF33538
-:10E1400033C4E35BB3E33F217B29C6EB95C64FB1F4
-:10E15000FDBD59C6317C7E1BE33DF00FE7C3F7518F
-:10E160005EF2EE74E338DA35BB1D3B8D764CCFC8DA
-:10E17000C30A9B3C483B7602ED1874AD407D05BE5A
-:10E18000B1D895D9B153520E6E6237217F809E5F10
-:10E19000931FD1801EE0CB6BB8EF331856DF52AC23
-:10E1A00084C8D47D809F22F0C3F70AD87765EB0B33
-:10E1B0007F56C6F0F6028053C4BE621A598B7EE3C6
-:10E1C0003F821ECF64B417E609A4DBCE1770CC4E95
-:10E1D000CACBFCCF9F40B971143C3BC9CCE107D3FB
-:10E1E000FB7AB7F38D345DA84710C9231D0A331D90
-:10E1F00017911E1F2031FE5272912039685FAA10BC
-:10E200007DEDE5AC11ED791B76CD07795FAAF4A021
-:10E21000BC3F1E29E1F1D2141E17761527FD415E81
-:10E220006721781608B295D333F33E1E5109FEA636
-:10E230003946013A2E88FB285E92F1AA84F345788C
-:10E240005C3936C2E38C4065BC841C5D6990F80E75
-:10E2500071D4586A7B5349C7385117E13FDD618952
-:10E260002306262619C621F946EEB8E1BA48DAAFE8
-:10E270005F17413AF648BF6E5C8FEDC5637D0D6850
-:10E28000E75C80F7DEF28CBFFEFED2FB5558967D30
-:10E2900038524EF85537ED6E1D07FB1D0A4DF662DC
-:10E2A000D894AA49FA318EE81A0F7CC8A12F5B23B3
-:10E2B000DC0FCEB94EC0097E49BFEF81F0DB09EB20
-:10E2C000609AEFC038A08CC70177462A689C8C07FB
-:10E2D000003EE102B8D00D26CDD33E35F77A770A5D
-:10E2E0007E66FC6DB008ED3563CDE42FE2C29FBCC5
-:10E2F000D262BC36044239D012A327D8FFBE2818F8
-:10E30000B8135AA23098837FCB6AF779D06FB706DB
-:10E31000D67B0631FE3322346FE39AD06B43167BF3
-:10E32000DB55C626611C705BC32DAF0D59F4ADAF34
-:10E3300090E38B7E26E1CECCBB0AE504F03D127261
-:10E34000A7160343F3FD2CE956E8E9D4510F223A0E
-:10E35000F5C78D75CCC47CBCFA9446F5AF62968641
-:10E36000DF065B13093027E215F727198ECB8736B6
-:10E37000C2C717BE49F0CBAA5596B0E009F6672D83
-:10E38000C9812D5EDA850206F3B6CF5792DB61DED6
-:10E3900006FF5DE47FB62DCAA7F7B06ED20DEF6F12
-:10E3A0009DDA447E4BC657EDD16890FCD315C65319
-:10E3B0008767C7EF41BC5CFEB45DFD1CC97FC6AE7C
-:10E3C0006E8970BBFA797C2FEDC7DE23AF90FD809C
-:10E3D0001C84F8DC05FCFEAF1CFBB84DE84157314E
-:10E3E00097437BFFD784BCBE3B3DDE8AF31BE0D363
-:10E3F000FCB3DE7FBCD92EE34DC1C72BE50FF0E3A4
-:10E40000DF2216BB0CFCF84AA46A381FE0D786F658
-:10E410004295D6E2094543F9CF13CD479899C47187
-:10E420001ED64C40AA37CED0DF0D9F27C570DC6AC0
-:10E4300041DF7BB5C7FF09E10DB76BC61311CA0BEE
-:10E44000B93C4BBB0C7AC9FDEFFBB4DBFD0EB0A7AA
-:10E45000804F07BE9A9FE93F24F6B9B7CA3C84EBC8
-:10E46000DE50E65987FC7F5031FC5E15EB9E66233B
-:10E47000DA11A6CFCA1A377C9D6D34CF4085B91109
-:10E48000F59AE92B4681DF2ED6D5B9BFD0391DB01C
-:10E49000EE57F32767DAA3D1F5FD88F173C4BBD536
-:10E4A0008CFF0AF5EEA580434F28F4243DECAACE5C
-:10E4B0004B2AD02E9865BECAF711EC284CDD157892
-:10E4C0008BE2A2654B148AD396792083CB6127CF48
-:10E4D000087FB34CE7FDECA4E1B7D63B8AA38EECF2
-:10E4E000BC1744C2B0D62FA28EF5589797FE0CEBFE
-:10E4F00026B9F4EDBCD027D5FD6619DAD5979CB9BD
-:10E50000EDF65B1117C12951519710FE6F959BE7EE
-:10E5100057EC67809FC5BFF65685FF47D8AF84622A
-:10E52000F18B0313CF93BDA31ECBFB65A2EEC4FA00
-:10E53000B3E79174964459D6BA20AF8E28AF63A83A
-:10E54000514BFF2A95F1BA475F36BF001F4F94E247
-:10E550003F3634023EFB72E273221B9F9228DF9704
-:10E56000DE2AA304E703FF3C16D7EF0883FCE5E0AF
-:10E57000EF1333C2D762BFC6121D15E5978C5BAF90
-:10E580004338D9B6C4AD7A34DBBE9647B97DAD8881
-:10E59000927DCDBD6EA5E0DB95DA87F7ABF73B6CDE
-:10E5A000FA2E9F5D834F1554021E6E77E2B3A4AF1F
-:10E5B000D32E4FBF3F7E5DDF44A4F390904FB4ED68
-:10E5C000186F183A8F473E1DE5721CBA214970CF6B
-:10E5D0008C107FA4E1803158971B290E99FF3EE3F0
-:10E5E00090AE850305384FEBDB7B0B308F7F6628C1
-:10E5F0009C330E3954D64D78DAE390DE11E290BBAD
-:10E60000A23C5E3DF21B17C5153567B99FAF39DBDC
-:10E61000ADEA209F7747B9DD9E3FD4A79A202735E2
-:10E620001887C03CBD220E41F86D20BA91B7BB558A
-:10E63000C46BFED93E1A57036D8C43E68F108700DA
-:10E64000162ACADD819AAE5FE0BED9E97DA1D2DC8F
-:10E6500012B5E45BD5837D744E22C77505B6179855
-:10E66000B4CFD972737836B7BF99715CDEED702381
-:10E67000C957ADEA0D607DA093E507910FEFE48DDA
-:10E68000A964453CAFC1B8B8134181EECE9305C92A
-:10E6900004E6D51EDE7F6FFE98BDF894F6C723F41E
-:10E6A000E29DBCEB92220F328A60FCBDAA915A0C0B
-:10E6B000FEA073CA977C9C9ECDA4475B046FC2BB2F
-:10E6C00035CAA76FF6F37D90F1D78BAB148A0F6133
-:10E6D0009A254B017E9E98DF3587E78775AA97E0DC
-:10E6E0007604781C7973E23CD52FE60FBA741DDAF4
-:10E6F000F306EFE2F9A2FAECD1028CF73FAC311548
-:10E70000DEAF6A8BB7927C9E74513DC3807FA89F19
-:10E7100055FD3DC4B7822157569D231F2C59CA125F
-:10E72000B7B86C6DA6AE29CA6587E4D35E87783228
-:10E730002AF2CF4A36E322F0E502BBAF0369734FFA
-:10E740000D1F79940D1F2FEB0B9B66184FA37C4C6C
-:10E75000710E7EF769E057EF1B2EAA5BF4EED9F33A
-:10E76000D14AA02FD1AD515D57E6334059C972CC83
-:10E7700067910754973EBE1EE5F260A16C8341038A
-:10E78000BC0FA6CFEB37AD372CED63D1074EA3DF1F
-:10E790003B788D843FC7C7CB7662703DDED7383873
-:10E7A0009EB72F44D54713B4BF831AE5D15B7FEDE5
-:10E7B000CD651F8FD772FD92ED5BAB3773791D6509
-:10E7C0001CD8F557ADFA21C7E52D35774C077E1CCF
-:10E7D0001C72D0F910E459298C0F36CD305F47F800
-:10E7E000074F70BE1E7CE31E1FEE937BECE0E772CA
-:10E7F000D9F9DF0B7F94CEF36672FB016E4E43BFF7
-:10E80000B56BD133C72A619DE3F3A7CE528104E0F3
-:10E810008507E36539DE5D5B91A587B756BFACAE72
-:10E8200047FBF3C6E9865CFA5E1535FF944D0F3F52
-:10E83000176DEDD688FF25CFD7EFC57B3FA99AEEA0
-:10E840003E0DF6B7F7F70E86794AEF7491878F84FD
-:10E850005710F02AB92CBCF6CCCB216F8097ABF6C1
-:10E860009AE178BD54CB883F2F541A9EDAAAE178FA
-:10E870003251C75C20EC7DDEB92F51DDB177D0413C
-:10E88000C5930B437B55143D59FFEE3A518111104E
-:10E890005BBCE4948A2265DEA766E9DDBC13F95906
-:10E8A000ED3B9BC766B5576F9C98D143F86F457495
-:10E8B0007256DBEDBF29AB1D62B3B3DA0D4B6ECEE2
-:10E8C0009AAFD617C96AD7FB3F9A057F8BBE32AB8A
-:10E8D000FDD1C0EA2CF8A5C10D59FD35BEDD0F6094
-:10E8E000F9283E6DA63696913CCE44BE16F41B2404
-:10E8F0008F0F9EB8C7877291AA894F42791B28EC67
-:10E900002BC3FAF58BCEDCF9DA7DB5AAF4DF65E826
-:10E91000EF0DC6F335091FAA18CCAACB6FA8E5FEE8
-:10E92000796DAD92B34E60F7C7D20F4BBF6C5FDF0E
-:10E93000EE77EDFE76D987F67A78BD9FFBFD5542DE
-:10E940000E5A033FF762BEFE6203AF237495C5A95A
-:10E950006E3020FCF39155B74FC273B5FC8039D6A9
-:10E960005D9EF1D7914092FD1AEB3CBE249B3C1D6D
-:10E97000FB936CC374AA4B6B9169FCFD0DE2FD5DCA
-:10E98000F8043F5D67E19BDDFF863C337F5CC4326A
-:10E99000F14AC3BB46B408F0FB48D3935A293C2341
-:10E9A000DEC39AD50E1DAFF96DE9087EFA93B53630
-:10E9B0007DC271BD432B2EE9075E6FE175F7EFB79E
-:10E9C00078580AE83BD9E2A3E72F5BFCF4FEE51692
-:10E9D0009D9EED2D017AA65A82D4FF8B966A7AFE0F
-:10E9E000A8C5A0E7F32D317A1E6D8913DC4F5B1AA1
-:10E9F000E9F9B31693DEEF147AFA41C1C708C8BA31
-:10EA000042FC884321BE36E055DD05670DD56AE737
-:10EA100081AFFF9A8BAFEFD79FA46A7A26A29C8121
-:10EA2000BFCAA94F3DB532AE4FEF37E125E361CC08
-:10EA30005F504E649D0EF07B0CF173637DAEE4CAB3
-:10EA4000F13BA870BC0E16F3FA0DCEB3BC10EDF975
-:10EA5000D7E361B2E7D7CC247BEE675AB63D2F1FD0
-:10EA600066CFD791DEB1A35827C5FA229D53D8EAC5
-:10EA70002045753A8D93759045EFF23AC868F403D6
-:10EA8000DD47D16E49BB7DB974DBE93D3CDB7809DC
-:10EA9000E791FE7998FF30EF26FF512D7496696F4C
-:10EAA000539C5820E8D9757A4511DA173722C8F3F4
-:10EAB000748355E33E33791F60EFC6B2E1F3BE5E67
-:10EAC000D343FE7C473ACE7993E298E1FE2B9B0F2D
-:10EAD000180B59FD3BF0E15CB65FE47CA8559F1D27
-:10EAE000DC0EFEF9E020E375B239FCBC4EFAC183BE
-:10EAF00067791DE382A624196C5D983577CF83E78B
-:10EB000081FB59691CCF9B263982FB01B4E0B95EB9
-:10EB1000DD0370A141736C1EF457A7F2685C78C9DD
-:10EB2000CC24B61BE26F927D0A6BD97E1223D4B43B
-:10EB3000DFA1225889AD3D2103AFE2FE5664DA30F1
-:10EB4000EF27669B5A1DD0B5E27C33D3617E7719DF
-:10EB500073D2FD90E1FEFD6EC55267D358B003E954
-:10EB6000D0BEB0839FEBD9E44DF249D6DB641EFEE4
-:10EB700008337C7539E2873671EE623F6F796BBA84
-:10EB8000E94778C5F73C9DB7B08D8CDF8F70407E2C
-:10EB900082FC1BE34AEE2F1F2E77DF9B75CBA43A36
-:10EBA000AA532494AB93B7772B94B78BBC89E99F76
-:10EBB0007158F3189937D9F3A387849DDD897616A8
-:10EBC0009E0F3919E55BED4A7E70AF92C997C06F11
-:10EBD000CE40BA16D589F317D63C8F9FD3DD9F95CB
-:10EBE0002F8D88B7C84B9CE97D2FF39D29C8ECBBBE
-:10EBF000D7D5EDC77B8E9D33BFD1B81EF936D34331
-:10EC0000E79C4C4BE96877ECF4305F8295CECDEC15
-:10EC1000B7CAB433589FED806006CF7B1FC62F0163
-:10EC200060BEC2A0232BEE29AACE8EDB6EAF9376F8
-:10EC3000F6EAD0810240E7DB124F1617E7993CFE57
-:10EC4000F488F76D3AB7170CED9DE57CBDCD6B7878
-:10EC50007C96FD7F10F7C73D323E6A799B0FEBE053
-:10EC6000DD5E07E97787AE759643BBC3ABF1F84627
-:10EC700077C4729D43EDAA5304DD1C2F9FC04B0D3A
-:10EC8000ADA03868A4F5BA84BCC876FE34D3207D24
-:10EC9000D48371CC935BBDA50AD64765FFA63A45E0
-:10ECA000C84B37F1A153C455F9819E9403E56CFC20
-:10ECB0005DB3916D1E8893CEC07BCFB41E8AABBC72
-:10ECC000135C662EBCBF2CE6EB74066394F7173A10
-:10ECD00018E6FD9DE5B9FDE83FD7F138B3559F151E
-:10ECE00047F804F065AA321CEE53420E1E70821CD7
-:10ECF000C2FA9D536FA37B629D9318D9EF8AFAE9FC
-:10ED00008F6EF3E69043FD33B47F4E1F93E7EF59C8
-:10ED1000F7255AF586C675B0AEF6320BA2CDB0EB2C
-:10ED20009B73FC8AC67578DFA23A3F88F0B5EACFBC
-:10ED300012C8C7F620A37A8756DCE441BC1F2CD347
-:10ED4000E87E449AAF33CCC7D07E8C26DF767C60D9
-:10ED50003D92BB91F6D78E1F85F2B32E015F6C36C4
-:10ED6000C673CCF7CBB45E65CB977314F91A8D9E3E
-:10ED70002CFF5A96F1AF3FA9DBBC01EFA93DCC783F
-:10ED8000FFB1BA30E5FBF6F6D5D2F356ADBB11F7BD
-:10ED9000A5758A8BE4CF3EBEB39CE3D5F57C8D5838
-:10EDA000D7A7A0FCEFAC2EC943FBEE45436DE16B4A
-:10EDB000AAD23C5567F1DFC5D1661EB7D731925F45
-:10EDC000AF1EF74D01B9F0F6AB2053C077C75FDE39
-:10EDD0003DA5BF7F3EB26E83E4964C3B975BF61732
-:10EDE000E04B9110EB31ECA13E7E5F640BC1497E9C
-:10EDF000EDBAFE0FC1D425F8366661767DEABDD640
-:10EE00009F94FAC252E2731ECB433E5F60F729E43F
-:10EE1000BFA306E99D2F6D57F9BD9552D90472B075
-:10EE20004D22A764EA520CCF3D50BF4C46F10D4134
-:10EE30008E13475E44B78FC64D14D34CC00B352A92
-:10EE4000CA3FB7BB17D81B7C7D1886F756948483BE
-:10EE5000FCECF528D70057CECC3F9FCA719F679234
-:10EE6000AFE9C90DF09C582FEA69829ED1F821F1D3
-:10EE7000FE5BC9AD8C0FEC755459677D1AEBACCABB
-:10EE8000E87554A69D27BEC9F8D75E5705BF5680C2
-:10EE90007C7FE7068D7511DF79BC90C9F34D8FF546
-:10EEA000FE9DF497EDBE1559F5F97923D0FBD428D2
-:10EEB0007EB1AB1FEC26C6D1FEED549F3F7072FDB4
-:10EEC00051CCE32FF85D3AB3D8FFF6C2ECF3033927
-:10EED000EFF67A51871F5FC770BCD66732BCB7E7C1
-:10EEE000F207C92FB42AB9CF1DBAEA1DE2BCD1E698
-:10EEF000276CE733FF9DE74DBA2A58DA7FA8C23E58
-:10EF00004BFFCA34F0A2E3ACE3B91D95FC3820E214
-:10EF1000D1AEE736D13D03E6B7D47D2B72AC6F8F0F
-:10EF20001B0D43F7CDCDC4B1CA208F5FE5FAED22AA
-:10EF3000EF6E3DC9F7235FDC37B2D30BF1EF17EB70
-:10EF400081DE8280C356DFCAB637F678D8ED618994
-:10EF50007C8BFD8378B8A59EE284EC7876428CF1B8
-:10EF60007B41C526C3FA4FC46FAA58AF99DBDFAC0B
-:10EF700032A07BDEC94BEF47633D8F17DA03EBE32B
-:10EF80009837C9FAF3AE451F21FB0A7EB4BBDE6297
-:10EF900077E57D87F75A8F92F23A57EC637A7DFBDB
-:10EFA000BD94855BF8B9D1C97B8EA13C1E00794424
-:10EFB0003FDF5E98D8311DE3939755B65F1F5EBF64
-:10EFC000B2D325EB506363FCDE8ACBDF7E64B1C332
-:10EFD000C29FC1665527FE180CCF8934714E64AFAD
-:10EFE0003BB9DD4633FAEF548DD168AD3B4BBE35AE
-:10EFF0000A797EBDA699CEB19E1EE1DC58C2E1E73A
-:10F00000659887CB3A56D90CF359E4EFDCD86615EE
-:10F01000CD48757C33DDBF2CF81746F923CB5792CA
-:10F02000FB61A9E7163D43F9E59FFC8CEA6C2ECC09
-:10F030002F4B319FE4F9A5CC5BA59DA8559FE8A86F
-:10F04000C07B1DFD1ADDD32B786E9307E3DE50FFE6
-:10F0500006CAF10C655501EEA3BCB724F1BCD2FC85
-:10F06000B40AF353CBF94AC66EC47E8572D0D5126A
-:10F07000FF5514E4A3B7C5A0767B4B233DABB4A4E6
-:10F0800081F4540528E3630B86A0DF8247555F2C8B
-:10F09000ABDD5569FE86EB553CEBBDDB0FF359E468
-:10F0A00002F2E3730837F724E7A76B8942F711965A
-:10F0B0000DB207B86EFFC3D8A182D8D5B143BED870
-:10F0C00025ED103F67750D8A73569BBE3D5EAF936D
-:10F0D0001EA4F50ECF5BC9CF25683C9D19CE077ADB
-:10F0E000C67C92DBADCCBD0EFA9E3124BEB3BEF120
-:10F0F00068CD3E8C67DB5F95FDCBF719967E9688D1
-:10F100003661EDEF3026C71067761E2D6DA2EFB089
-:10F11000C5773491C6E2B20196B9EF68E7D74331BB
-:10F1200047D67D9A10E3F534D9BF3926F24320073C
-:10F13000EB76F2BE443EDE97C811BFFF9398EF5EB8
-:10F14000E453157E1FC2EF2B2CB67D1F62C42EFD2B
-:10F150007D4842F48FF63DC81D319E5F98623DFCAC
-:10F16000FE3F86F8C6F97718EBC57E2DE84FB68EC0
-:10F17000C120D1CF72CE138F713FFF428CDF7771E8
-:10F18000F90D0DF705E65B4172D0C8EF67CAFE05C1
-:10F1900067D3FDB7D17A0DBC7FC15993EA48F2BB62
-:10F1A000BC78ECC67DDBB4CCBD9C76AC4778F1FB7B
-:10F1B000147EDFE9DF059DF6A7FC3EE5369FB8DF4C
-:10F1C000C326EFC3DA66ABC1BFC7BC2576D35042B6
-:10F1D000A3F5EFA2F5C5F738D5825E78BF89DEDBEF
-:10F1E000FEBF024DB1B27DE23B9E4F115DCD1CEFE3
-:10F1F000F4FF2721319BE44BC257C7663509F8CF8E
-:10F2000012FC460E9F431E843C56119E9731DFFD33
-:10F2100084DF1A8EDF87627AD6F75F526E016E3B0B
-:10F22000C189EF83FAE31B3C68CFD3DFFD27A6ED4E
-:10F2300033A65C169F76D03CA65C8FF3497573BDF0
-:10F2400090F22FE5E1BB621F66C61429575FA6F155
-:10F250004D578DFE6F123F6DDF238D4647A032BEA6
-:10F260008FF0F0A7EF23EF8FE5D6CFF7848FFC7EEA
-:10F27000CCAE17CF0AFA61DDEFD13A6541BA9704F7
-:10F28000EB3E7535D685797F407CF0A4E7FD21B54E
-:10F29000AF705E56567A59F74AFE0FED913B6F609C
-:10F2A00046000000000000001F8B08000000000066
-:10F2B000000B93E46660F8510FC181486C62F11A4B
-:10F2C0007606866816068699AC0C0C15402CC74944
-:10F2D0009AFEE540FD8B80782E10CF00E2C940DC1D
-:10F2E00007C49D40DC02C49240F34480981F88B953
-:10F2F000809815881980F8370703C3370E8439378B
-:10F3000080620F48B41B84AD7810EC3340FF6F046B
-:10F31000E2AB6484C3281E1E389D9F81A15A00C1A0
-:10F3200017104495CFE047B0B94429B34B1AA81F32
-:10F3300000656D40B4800300000000000000000084
-:10F340001F8B080000000000000BE57D0B7854D5F2
-:10F35000B5F03A8F79666672124298842027103091
-:10F36000680A4380088AF51022624BED48A9622F93
-:10F37000B5038D80104854ACDC4ABF0C4C8020286B
-:10F38000415141910E0816156D44AC58D13B20B542
-:10F39000B4B56D6CB9D55AED0DB5AD2F0C8852FDD5
-:10F3A000FBEBE5EEB5F63E9973CECC24E0EBB7F778
-:10F3B0000F9FEEECB35F6BAFD75E7BEDB577DCB242
-:10F3C0000B0A07029CC49F0B006E7103C098743A2D
-:10F3D000F2C66FCC7F6834FBFDFFBA23DBF5743DCA
-:10F3E000331D0812D50330008A012EF0B25F59BDDB
-:10F3F000893F3FF2A7114500FB40010FFB945227C4
-:10F40000F6F91AEB67DF8710C172F9E781B2CE0017
-:10F41000B68B53BB2F036F972AD7CBB42ACC808CE3
-:10F42000DF0D2FFDCEFA19BCA989B53FF14180DA75
-:10F430003BE13053F850869468737210F6ABBED738
-:10F440005929F2E5C00607016F1D404D1ADE03AFD2
-:10F45000BC46F0EE5719BC7A96F1BD0CFEA234FC06
-:10F46000FBE01BF950C5E1376AD2F09F2E3C34FF18
-:10F47000BE002B9BF5272B5C003737C39315430049
-:10F4800056377B29BFBC59A37CA2394CF9952A6B0E
-:10F49000C2F0B0721B24E3AC7D6834AB6FF6C7FEDC
-:10F4A0000B54796D7977116BEF4DE7D540D896F70E
-:10F4B00096E9B63C03E75098CDFB2C319FE5CD0C87
-:10F4C000071E1CDF0BC69958FE6DC28B4FE02D1135
-:10F4D0001C7AF9208697D6E715466900976E4C4747
-:10F4E000F82A026E3DC958E3ACC0EC29309C8D1B54
-:10F4F0008A01B07A89DB016E65700F0B4C7A03428A
-:10F5000000F7B1FE5B59FF4AA8F5450F2B5F55EE9A
-:10F51000D615C4CB0EF52F9D6C0C2FFB87783B7353
-:10F5200003CFA7E7C5F296790E034B396BFFCB8269
-:10F530003B5E94181C890AB7EE91D2E374D3A59769
-:10F54000FE87B4D9F3CEFE2B74A316F9D4EC77085A
-:10F55000449769812F6EBF6731DCF6294CF76B8EBB
-:10F56000D36BBF8CFC51D676C80648A6CA33C7A950
-:10F57000D02393E3ACBC62830AC972FEBD88C94341
-:10F5800005FF155696D5FA635599F080759C41692B
-:10F59000BA54E8EE9932E38B8A8ACBE64B8C6FA0A3
-:10F5A000CD42E7419C41515ED6366BC48F37375709
-:10F5B00052BAAD596B27F9F94899DE5E9529877FD4
-:10F5C000453DC5DADDE202E2C3F876486E97B0BF8A
-:10F5D000E8F4992CBF666471F54D3AE6A7CBA817FD
-:10F5E0004CFE5E23E9C4DF71C6DFA8FF9CF271B355
-:10F5F000CBF80AF6B76AA42C2D433C57707EAF7047
-:10F60000A5BC83B1DFB64123E3D84FE4779D58AF63
-:10F6100062C8505D61E30EABE0FCFFCB31777851FF
-:10F620000F76CF7F71717BC528807C071F68A7C8C4
-:10F6300007DAF89EF9C01CE7D39687CF8EBFDA7A37
-:10F64000E4AF35915BDF40BDB1AD82EB0D275C25AA
-:10F650000353E1682093DF2A2A189F219D223DF35E
-:10F660009933BDBD3909AF321EBAAD394C7CB7AE46
-:10F6700059A774B5E04317F25409CB0B3E84A2D1CD
-:10F6800094CFB95EC1525A8FFA4E4B428CC1791B4E
-:10F69000F2E7B9F87DB96194B1E695661E5232D3AE
-:10F6A000FDEBB0BC94F20694217F9AE58FC40DD691
-:10F6B000BE50D49F243D124F3024DDE6E3F9C952F9
-:10F6C00097112FB3B65F6D18E3D3F5593E555B61C3
-:10F6D000ED8FF55F6585E719AA6FF6572F1D36E2A6
-:10F6E0002CBFCEC7FB6B955EFC5CFABF496A0BE38F
-:10F6F00042B3CAD1CF4D663EDE661855E971CA974E
-:10F700003E6CC4ADE5F0B0ADBC66695B3CCEF07656
-:10F710002744074B8CBE2553A26160F4F7459371D3
-:10F720005C6AD3F0717CA7E77707C1EBAFE0E555E2
-:10F73000D2EF8D84853E13A4DFC4117ED3BE510465
-:10F74000BFCA3F2FBBEE39C6AF4ABE3B4276461119
-:10F75000CB8C63E34D8B81CEE090C331407DA084A0
-:10F76000D5BF5BE5C0E43F06E75882B32E3A3D07BC
-:10F770009C712B9C261CBDC16DC2919B4FF9F84E0C
-:10F780007EAABD64EC6FC73316F775B82268E7F53B
-:10F79000413C313D001FDE66B8D8F73E5319EE7587
-:10F7A000A2DB74189CD96FD19452485AD6F14F9B62
-:10F7B000AE83313F86F0F61D694C9ABE2C3FD38A4A
-:10F7C000C7B1A29E93FFCCF9B933E6F75DDBFC40ED
-:10F7D0006D0B4783BDCF6F9D2F323D1AC8ACF74BE1
-:10F7E00089DBD1B593C67E1DF878E061FAAB00C71E
-:10F7F000AB4E8F57F015361E76A626B38E5758C7D8
-:10F80000C6F37E76F874CAA309AF2F03DEDB6CF073
-:10F81000DEE462729B85FE9F35BCA72A7F7EA67FB1
-:10F8200049FE2A7B96BF4FBBBF02FC95F1D3BB2A92
-:10F83000A42E60F85A74A1371997D27AEEF3C657FE
-:10F840001F2C62F45BF4EB51872F9031C3F8FA4B15
-:10F85000E9F1174A3AC19D8BBF73CD072069EBE7E9
-:10F86000FFD57C72E1F5B3D643A7AA5F97FDC14FE0
-:10F87000FBBBE5159044795A7EF042DA672E7F6E25
-:10F88000623F60FDB85ACF06834DAA40D819CBD14C
-:10F89000CEC0FEEB4ECDCEB8A919DA5B98D1F558A3
-:10F8A000284A76D17209A8FD1A66B72599FD32FA61
-:10F8B000F96DDE9901B2AB285DEE02B263463F7F7F
-:10F8C000409BC8A6E01F523812797FB9CFFC7E68F2
-:10F8D00032DAB9AB2BD877C61ACB83BC3FF63D8A58
-:10F8E000F5F386F0EFB9E0CAAB64F058F0EE732799
-:10F8F00063D9F4E3976599F0B351D85D37A3DDC5BB
-:10F9000014B2CFDF1643BBDA5FECD6B74A99EDA647
-:10F91000CBDCEE5F3FE427717469AC42FB8DCD7F99
-:10F92000FFA5F7416715AE836D868CED23DC35B0FE
-:10F93000D1B1DE07D086A375332C4D646BA6DF9161
-:10F94000BFD9AC1FD727A0BD16AAE4E513969D3FEB
-:10F9500021612D87111370DD35CBAF5C3686CA4B24
-:10F96000BCD117C7B3F14B98FE4C303C95A86D52F3
-:10F9700013D1333BBFACBFCA3B3DC960587FE91DC3
-:10F98000E55765C113A322D1D9CC97D6DBE56BA38C
-:10F99000C0DBCD028F6194718B5EF3F1AADD7ACD6D
-:10F9A0007726D76BFECAB6A588E7D27A88A09DBD18
-:10F9B0009EE12F6619DF5769D76F25AA7D5E9FD517
-:10F9C0007CEE04E30AB96FEEFE9DF27527C4666211
-:10F9D000FD12B18EFB2B9352ACAAF7F93BE79B6B60
-:10F9E000DE5F15F864E32CCC36CEE7859792001BDA
-:10F9F00067F4A73F8EBFDEAE274F15EFD0B0CDC066
-:10FA00007D359A9AB86FF6415D2445FBB91BC90F45
-:10FA100077BD801D621B35B46B120059F5995AE110
-:10FA20004EFBD3F07FCA8CFC6C7431D3C52FBF530F
-:10FA300070C0523F29078BFE9EC77E3907CE39A979
-:10FA4000A4DB83F0F7A9261C8142DBBCDE6F3E56A7
-:10FA50007000FD72DAD47CE861BCED4C8FA6987C16
-:10FA6000DDDBEC851493AF2DCD1AE57FC8E40DD313
-:10FA70007B98FC617A37DB2F62F9C6E608E5EF6C0C
-:10FA80001E4BE9EDCD067DBFAD7932E5D73547296F
-:10FA9000BFB6793AE5BBF1F9211BAF46F02B9BC706
-:10FAA000908A645C463FED6888303061257EB7C03F
-:10FAB0007FB33CE16919FD9ED37DE4DF0808FF8632
-:10FAC0009FD17730B63BA4C076C83DAF04CE8BC182
-:10FAD000F11545E6FE53B592E4C56FCACB7A20BF57
-:10FAE0008A2FC2D62DA672D582BA42E4775F847F70
-:10FAF0000F54AA4974C1048160C40D7C727B39958E
-:10FB0000A77CC3A90B15FB1B21F8A3352053BD35DA
-:10FB10003B787F4E3E1951BD4B6614036F50E5F59F
-:10FB2000927CBDAC1A752B7D6FD5641A77CD06DE3D
-:10FB3000DE57C9F8C6C2B7616510CD6367E8406992
-:10FB4000391BEFC7C1FD8306B3741DDBDAE0FA751C
-:10FB5000EF9AAD85332D7E24AFC2EDF360DDD6A9DB
-:10FB600015AC1E1BD6C0719535FEE4D672A28782F5
-:10FB7000F09DE5E3F007BD7CDE4A0324715D32CBE6
-:10FB8000CF2EE03004B58811ADB27C178A27A827A4
-:10FB900097F9B15D2B44B6EAE9F24AB39D616F571C
-:10FBA00069B68BB7EFA7764B583B48970F2B10F0F1
-:10FBB000C0485BBB61269CB04CA676717BBBA1A202
-:10FBC0009D39FF61DB3A24AB9C0DDDD02971B9B1C1
-:10FBD000D32517FF8C0021B7FBE3D249C4473BCFA5
-:10FBE0004B92B7F52423D5D93BEC723D2CE990F329
-:10FBF0000D6E9B1F3D8AB2CBE8B156D06B53537646
-:10FC00007AAD558F1D44FB44D9A1DAF069D269ADB4
-:10FC100057D0B1C94E47934E6B3541C7A8838E026A
-:10FC2000EF6B4D7ACDC84EAFB539E8B5D6A457CCF9
-:10FC3000DECEA4D7DA1CF45A6BD26B5A767A39E945
-:10FC4000316C5B8CD69D34DD2294FFACE8E1D40BA3
-:10FC5000CFC93A7D97D71BDA04D40FF52ADF275591
-:10FC6000A600F7035056D88BDD1A17F64913E0BAF1
-:10FC7000700BFE6AB1CBEF75F3FC9589C313D00E00
-:10FC80000F75DBE1FB27A03F6C9328BF2E7182CA62
-:10FC90001F97A33185FA4BF2F11DF8F24493B0811E
-:10FCA0008154AE6A175730BE285F2347E21639F0F9
-:10FCB00080892710E737A7C6FF005CFF2078270759
-:10FCC0009F129CD72B84CF24CD3B034EB6BFDCC004
-:10FCD000F635A582BF4B9B189CF0E9C309F57CBDA6
-:10FCE000E85E9F859DE482ECFD54AC916D7A765080
-:10FCF0008BDF96D79714DAF2672C2AB5F15559C3E2
-:10FD0000205BBEB4FE2C5B3E3CA3DA962F9E76AE03
-:10FD1000ADBFA229B5B6F20C7E11F96DCA4B4B6D81
-:10FD2000FC121F5A8BFBB64DA27C4762682DEEDB9E
-:10FD30007A2BFFFA55AAE165F8578BDCB4FE300A3E
-:10FD4000127E4C7CE56B1077A3BC16059217B1723E
-:10FD5000BF66C4C91FA019807684ACC528EF0ADB32
-:10FD6000D7A7AFA1A1C4F8F4EBEB54E8A57FE3E378
-:10FD7000F4DFDBBC9CFC62AEEF4A115F4FD7B1ED04
-:10FD80009284E7224C3FE23AEE62668E2F847C2119
-:10FD9000F887F133EA154D9584FC9E9E9C0D6CB559
-:10FDA000EB9B01717BBEFF62FB7C4E95BF3F2FF941
-:10FDB000ED0D7F6B2112574E017F115512E7D5A72C
-:10FDC00027FFE11976FC144F733BE4C4A1CF3F67D2
-:10FDD000FCB598EB0568B5B8FE065AB80FE5DE35F8
-:10FDE000FBB55816FC99FCB2AEAEDA6FB543206293
-:10FDF00099D7A0F4389457B2E5BF687C929C40F63E
-:10FE0000F15C36FF72B46372CC5FD07BEDF8FDBE5F
-:10FE10007FA5F9A7E9FC83D36A1FEE86B74CA3FD43
-:10FE20009A9977ECCB32DBC7B9BE89F964AB9E6493
-:10FE30003F952AE3B310F82388E7F77DA1E190CF3F
-:10FE4000F6875E9E7ED6FBB67BEBF87E26FE725E64
-:10FE50007208E253C471DCF2F2979244F7F132DC9B
-:10FE600081E5553295DFE00F6D45B8BEA9C46E50EF
-:10FE7000FB22BC6724F1BC18D44E6DEA972CF31416
-:10FE8000769139FF5CF6D1B296EBECEB194CABB541
-:10FE9000F2E39D2D2BA99CD91D2D2AD1EB8B621F3E
-:10FEA000E58473A3FA05B68FCCF30167FB7F15FBDE
-:10FEB000E8A0DAB0CC6E1FEDE17410E5CFB5ECA987
-:10FEC0003D9572D33EF207DC621FEFB05F2A997D49
-:10FED00084E7470161BF5426C95EF15526B9FD523A
-:10FEE00069DA33F6F5EA1A3440C7A4EDA31EFA37EF
-:10FEF0003E4EFFBDCD2BD7FAEE0B98F6511BB78FB8
-:10FF000018EE31CE44A9E47E0EC5B1BE8F76E55819
-:10FF1000DFFFD7D847D9E5B737FCAD85366E1FF57B
-:10FF200082BF69B9F0F72F6E1FED50E1FF33FB2858
-:10FF3000179FFCEFB68FD274FE74EC1CA75D63DADA
-:10FF4000119FB57D63DA27CC8EA954516E999D859A
-:10FF500076CCFB72BBF70E369F1B944E2F2E8AB7C2
-:10FF60000A795DAC46D7B968FDEE247FFF06D4E779
-:10FF70007D859EC5F601119FA74600ED9DC56A6C63
-:10FF800083CB720EA1043AB558E08B870766E7D998
-:10FF9000E72FF062E261B7AB40D0BBE99C289FD766
-:10FFA000A38407E8E4768CDAE9C5F449B1BEDD9BA9
-:10FFB000810F20BB5119AB27511FB0F64FBAFADAA7
-:10FFC000F0E2B5E185AD437C3C50A236BB91A7FE83
-:10FFD000D19A84FE7296ED40FEA5F3721DFDC26DAE
-:10FFE000938732F8FBC4565C83F198C1972F7E0348
-:10FFF000E31AFB74CEA4F8C696AAEA83B5AC5E7E7B
-:020000022000DC
-:1000000044BB74928EEB2A905F71157646EB2624E2
-:100010002604C4394E29C06F969F10EBA60176BB0B
-:100020005CD655D39F3428B7BCB01FE9A427B37D55
-:100030002EF97059E59AE4F3DA53934FA1F7E3EC04
-:100040001FEA8B02473FF9867D5D088225CFCA3FB4
-:10005000107CCC2C94CF653C0D6EF5EA8C3F5C1582
-:10006000B286F191F9A01520FFF9EB5448A1FFA544
-:10007000E8581C5DB0BDD1A505FDE87C3F0A975A44
-:10008000F613413797D7F0AC96F215ACDF13A3798E
-:10009000FC7D1F8DFD579D399FD542BEBAF3555B40
-:1000A000E9DC34C1F86910DFDFD03D825515BB347F
-:1000B000AB9E1EE1966CF7082CFB365DAD11F63455
-:1000C000C38F52211B68077C52FE503E267FE44DB1
-:1000D000B1DB09A74BAFF1E25EC5A9F2C7271DCF7F
-:1000E000A46BA65C2D1574ADF7A2DDBF223CB5C78D
-:1000F00073D44CBADE4A74F5578091CCD2FF04B762
-:1001000094357ED6B93F72DAEB4ABF9AE95B7AA2A0
-:100110005B91D3AEE5FDFA162BFA5F5179A91AADC2
-:10012000035ED1DF2AFDD638EACF13A813193E9417
-:10013000B6912971FE18D9CEAB50FC874F37489F36
-:10014000D279774D1A3E77997DBFA616F9ED76E103
-:10015000F4B86485DFB7D84D7078713CD4D31AD029
-:10016000B9A71AE0FEBD8CFDA3C36E5859569D3544
-:10017000CE40FDB4F6ABD3ECF09E72BB80AAFFDD9F
-:100180006C93454FA7DBA9F0778B3DB506F9DD42AF
-:10019000FF152ED823B1753811BE0C623ACB6351CE
-:1001A00009402BA6E3900FABB97DB743A2F36012D1
-:1001B000691DFFE3E74457B875EA47F6C6084F4A9A
-:1001C000C000AAAF9FDA39D2FB0378DCD220096CD9
-:1001D000F51F74BBA95C8528609CE2FBAF5C14A68C
-:1001E0007E0DF6A9260D87B3DF2BDCB107DDD84ED7
-:1001F000E3F060035AC7C772BF40D8CBDBBD3F7383
-:100200002AC571E5826F43333F5FEFCE8BB82C6810
-:100210003DB5B8AEF7D9981D55C4FF7EDCD7421B5B
-:10022000B787060A9A6D595248DFB7B4F42CE777BE
-:100230000939DF8CF69187EE55D8E47E9B8837DB51
-:100240002E81ED9EC5100F8FCF7A4BC8FD166FDC47
-:1002500047F7159E59E51B8AF12E8794888FE1A1F7
-:10026000E22AA330D6031E86B4D9E5ED74E33B5EE3
-:1002700076678FEFC8D5DE8CEBF8A47821DBAC1461
-:10028000F1303B41FB96D405249F25826F4AD8FE6E
-:1002900005F5D0C0382475ACFBE149B0F207FBD9B5
-:1002A0008F7E8AD27A3616D22B26D3B974E9EDEE38
-:1002B000A44CF2AEDD84EDC387141E6B0846606665
-:1002C0000DB12AB50F2BCF4D40511B2CEC33586389
-:1002D000BF7751B6C47E5FAAD4714F228CF65D08F9
-:1002E000FDAE967AE59F9C1E210FA3C7D99F3F3D87
-:1002F000B6A9865FB3B4AF9020DA9EA5BF0A0FB748
-:100300003B2AD6ADE77160F50178D5B25FDC2E19D6
-:1003100085B8186C6EDBBA14CFD9E2F51019C2F0AB
-:10032000DDBF01642B1F8FF2E4513F2E30E26732B4
-:10033000BC2DFFF6659D4F215DC7834D8F65D11F95
-:10034000A33C4C5E5C455C7F6C6B9BCAD30F155A1B
-:100350003FC24B20B98C8158178B2D7521FDE702C8
-:10036000C5A187EB9BF6617C754903447018C6579D
-:10037000C45FE1E99034885FE05098F1C7003E1512
-:1003800018807C81EBCF224E5F932F4A1BECF76DD8
-:10039000C2F5F67CB1B0FB8B9DF7B71CFD94E8FC71
-:1003A0001E94BE4406BCF707D3ECF76DC2D079FFAC
-:1003B0008F10BE0381480AF935EE18C7D1BF0AB1C4
-:1003C000CB3C0C9F8F7D7FCA2FCF64F57FB8A4B63E
-:1003D0000FE2658B379A4FF78A5AB3C79D65F0AB2A
-:1003E0006977E4A89FD6A3715B5CB3335D31A4F851
-:1003F000BA590C8E55410348AFC5AF20FDAE08F980
-:100400007DA6E4322FC6932E0F54537CD83ECCB336
-:10041000747978683F6BBC9822E277CD7C42E853D0
-:10042000E778D77BB81EFD3B18D7231E467A62615A
-:100430009CB72B5CFCE84C9DCE0B8D649676733C90
-:100440007E6E5FEAEA3FADF8670BB8467208705AF5
-:10045000FE85599E582BF267BC966D2790FF074189
-:100460003281F46F6A137EF7EE7A378B7A71BC773C
-:10047000D95D2FD606D67D27AB772BCE87D5336CAB
-:10048000F5A219F5EE14F5C036AE9131EE26133E05
-:10049000B0F617C9E86F8BE88FECC1EE7A7A467F29
-:1004A000F789FE0C5B3D2DA3DE83267CB671C13E31
-:1004B0006E77F959EE6482F4368FA7DF3F6412F14C
-:1004C000CB81219326CF62E35CF70B97D01157D2F3
-:1004D000BA6DF2D53E51AF05F9AA8AE2F05A1BF087
-:1004E0001EB0B8279C084CF5C62CDFBBF92A305546
-:1004F000CBFE7D96ADBEDAEA0363147DA7FA2D1F0D
-:10050000293CBE395E5087FEB89545B28877FE5BC0
-:10051000C250991EEBABDAF2AD615E3EDCFBB74434
-:100520001CEF14897B304C573E596591EFEEF13F3B
-:100530002FF8C579461AFE77134685157E9E37E15A
-:1005400037F3DE125E5EDDFAEE44BC5865DE03185A
-:10055000DCDAA785FC175FD8F9492DF6F9F17C7A2A
-:100560007E3C6FCE6F74AB54F7AF35BFFC163BFFCC
-:10057000F17C7A7E3C6FCEAFA635FFB4E6E7AC8760
-:10058000F79550CFAF1A725F18D79D55B890B27ECD
-:10059000C7B6BE9058CAF237F535ED6D9DF4FB48ED
-:1005A00030CEF28EE9BDDDAF30F8AD2FC6ADF2F33F
-:1005B0006018E216E7C16D61F473BEE6D1441C1DFC
-:1005C0008753F1DAF30331DF379D67BFFC13D7613F
-:1005D0000C53E4FB49879EEF655D5B5EC2D79315C4
-:1005E000C1886C5DD7CC38E867FAD690FE49685C64
-:1005F000FFECEB2BF451115BD7B83F8FEABB84BE05
-:10060000BAB599BF17D026EEC3268AAA093F6DE670
-:100610007DD8F8249B7EDB3F61D241F45F1D3FC44F
-:10062000DF8978C2CBD7BDE5CDD0CEDF3DF0D2BDDE
-:10063000EEA759BF3156612FB3F730FD29B3F7301C
-:10064000DDD31CA6F427CD3AA5BBD8B8983EDC1C58
-:1006500081181B7F67F3584AEF14FBABDB85DFF78C
-:10066000CB4532F92DB634334BD985FE5F2FA5F734
-:10067000346B6BD421E8FF0D53FEB834758E97F6BA
-:10068000AF9D897C06E763BFABA07BE2E38B545A46
-:100690007F414D29F9A3D3DF4DBC1E976A1BB0DD06
-:1006A000B96199D7F32613A1ECF5AEC17A63C32AD9
-:1006B000C10381B8122ACA5AEF7BC85F3501D19FA6
-:1006C000164B04B3F77723F6571D10FD15E9894043
-:1006D000F6FEE2D8DF708DE301C29DCBF2B2D75BAC
-:1006E0008EF5AA3431DFB2949C977DDC9BB05E61BD
-:1006F000611BDDDFB96006903DEA2AD2B790CF4298
-:10070000D44BF68D82CCF8BCB04F5B13D63B3F1672
-:1007100081416C7C3D140199F1B32BC0CAABF02E22
-:1007200039EB87A5E74D63E5AC5E12CBBF6429C703
-:10073000F62C1D375DB4CFB7979BE3B95AA1FBFEEA
-:10074000345E1A77B5D8F3053297CF075AAFA8436E
-:10075000B92F10E74FBFC63C1BD7B5044C7DC4EB87
-:10076000FB79F95366FD102F7F45E40B0BF9BC7D37
-:1007700093BC142F7CCFF5434B6655A5E73BE07B3C
-:1007800095C36659E677CFF7CE2D991548CF67C048
-:100790000DE387CDEA61DFD367B2DCFD2609EAAD60
-:1007A00082B62AD29F233D51B20F47F6AB31509EFD
-:1007B00095351CAEB7BDE52DCB54822B4EF73405D5
-:1007C0005C772FB0C3D57FA11DAEBB17DAE1EADF9E
-:1007D000D8335C4F78B95ECB051F1BDFB08EBFF9F5
-:1007E000DFEDE39FF17DFBF89BBF6F1FFF8C1B3F8D
-:1007F000F1F8292B5D365D631FBFEC5AFBF89BAE09
-:10080000B58F5F76DD271BFFD3B2C7CFF7C6FEE9F2
-:1008100015F6AE62B53B9B6236FB94D53B29EAF1F7
-:1008200073F46E7B3C66B34F593DD527EC5D5BBDE1
-:1008300068463D9F4FD8BBB6718D8C7143A2BF9463
-:100840006CED2F92D15F1F518FEEADA4EDF18CFEB8
-:10085000C2625CC3564FCBA837C084CF362ED8C7F0
-:100860000511077603C6814942DE59FDC533D83EDE
-:10087000BB1CF7A15109F7FB5A1F1879807D87C16E
-:10088000FCDDA382498B07E27A2E4D5A7C26AE7F8F
-:10089000AD0560DBB74DF2713FC2189F42A99607C4
-:1008A0004DE4BFF336955C6AB9F7BA59D4EB2E0F15
-:1008B00034957CC3527E9168DF2AEE0DD6F97E4BCB
-:1008C000F688D69FD5CFE237BBD8EC4F944351A4DE
-:1008D000C36070DF79C5D43156FDBCD9E7A2F96B8E
-:1008E00003C5B865D9E16A2DE7E3DE83E306F0BB13
-:1008F000697F349510BE359E9ADF6F0FCE96FE8AC3
-:1009000058DDE6A575DD2DD6F50277D38FCA191C03
-:10091000890132E0FD8695653DFB735A9AEDE70B40
-:10092000AA163570DF573A57AB46F1C8D5EEAEC9B7
-:10093000F2E46CE70FF5623E2D736BDBF0BE0E1C2C
-:10094000B0FB71198383F53EF215EE58BD2F9B1F46
-:10095000B7C56BB36F0A8A7BBEFF65DE93EA9E075D
-:10096000EB281BDD56FBC4F9C821AFCDDE2A289445
-:1009700069DF79A28A9F1B40BC84FC84DD782DADA1
-:10098000F55AC75FE518CF07530D5C077099427998
-:100990007157F07755FC456D5AB98EFE830E3A0FAC
-:1009A0000471DFCDECB7253C95F6E327C43D5835FF
-:1009B000DC3681FB1D057C9AD055629CD20D2AA4A1
-:1009C000FAB0B15DB1D5BE3156BAC5E95ED0FBAE65
-:1009D000E4C5F4DE5339A3BF9439FF3B7CDC5F7C74
-:1009E000973EF5B7E559E87B373A8B2DFD967EE0CB
-:1009F00086D4A8DCF5D3F5385CDD7C1B66FC8AF276
-:100A0000AF0BBE751B3FF4658BB730F58338079F7E
-:100A10003516C48F7EF99FD83CAE3EE8E2EF2E88B3
-:100A2000FB36E6F9D0D5C26F3A4BF85DEB211AC21E
-:100A3000C2B741A67B496FC3EF42A32CF47FD2E734
-:100A4000E670B5BAC8DF659EFB5ED5E6B2F9C3E6CF
-:100A50006CB0E767C3D462D45BB3D7BBC8BF76B50D
-:100A6000C34FFBA098EF1C685A8176BC796F7B96C8
-:100A7000062ABECBB3E0F17B6AF07ED47E1FBFBFF7
-:100A8000F726E31BDD226FF3024937DE037875F7A3
-:100A9000A8CBCE036C9F5C518AFAB600B2BEFBF6BF
-:100AA000DD563B7CBDC1EF841760598F70A83BA415
-:100AB000ACFEAD0E9F794ECCE9952BCEC38CBB38E6
-:100AC0002EF8A8DB0FF3E73CE187E1F117BDB57F16
-:100AD000BF97F60BBC9D6E949F46B569B224A7CF15
-:100AE000A73CAE98D19FCDD3B56742AA3FD8EAB50F
-:100AF000F65CEFD824207DD914453E32EB2D045608
-:100B00000FE572EFA5715BBD0A566F70EE7A5D421C
-:100B1000AFFE7CE7BD6EF447BEFDC0E14B502EE753
-:100B20003FA980978DDBB5330829DAC726DDB89F4A
-:100B30009BB75BC97A9E4B1103ACFFF93F0ED27A8B
-:100B4000396F97273985B59FF793578703C343D7E5
-:100B5000B263CFF6C775F701899FABC63B87E3BA8F
-:100B6000364F85EF44B3F4D7D7CFF9F0C81379D314
-:100B700091CED28E7D5752BFED97BB3C167D11F0C2
-:100B8000BBCC7ADC1F77BF941C92459F98E76047E7
-:100B9000EE97387C7B5C491FC2B7638B3BC6E0682D
-:100BA000DCF10EF1D5C41F3F14423C34EE516C7E93
-:100BB000E2C61D4ACA339CD2C31EBA8F6A04A41A65
-:100BC000C427D78F0B772F20FFF9C2F6D5EF282146
-:100BD0006C6FE76F8697480AF1FA82129982F9479B
-:100BE0007F14D219AADEECD81E42BCB27E67BAF3DB
-:100BF000F11CD8EEF7C6FE3F28CCEC0FE0981BF9AD
-:100C0000ABB17D151F6FF7D75E43FDD2E890A337D8
-:100C1000F19792CC7397F3FD8E73B01D7D4EC9BED4
-:100C20009CFFD089CD7136EE915D6F6D8E33F81BD0
-:100C3000FEFBDDCD37A21DF4B44F433DD0F8C07F9D
-:100C400086C0B26E5EEEE7F2D875FF8FEEBB8BC941
-:100C500047D71F3DB47E743DF5DA193A9B77D72309
-:100C6000FFA75867F5173D7521F90B163D36B15FA3
-:100C70004FEB27F26BD2FA2E99B87FAEEF61E3F417
-:100C800063D9BD2275D0E799DD0AF8189C6FBFE8DB
-:100C9000A17B528DECDBE26AA4D702D2CB985FC273
-:100CA000F0BC70E7CA7794E1D9F01DEF2FE3A503FC
-:100CB000606218467A7FE3EBE78FC6D445E72B8D59
-:100CC000708CF4AAB35DE32146D711B9E978023EEE
-:100CD0007463DC4AE3CE557CDC7646C750261DDFC4
-:100CE000C65FC665D2F17B0E3A9E80861FE2F92070
-:100CF000ECEE93F55CD83C3F5BF0D8377BB4B74C57
-:100D0000BDD01B9EE74A1CAE5ABFB1C28FF2B5EBF5
-:100D1000C1FBEE2AE2749EC210D3F5D08933F052A3
-:100D2000F7EBAE6357A27E3CF69447C3F57EDE53E5
-:100D30002F90BC753DF6BC5B27FB1B0212B337BA84
-:100D4000A0FBA703ED8F8512CF346E0BA63CA13418
-:100D5000BD16262F9DAC87E8FB61FA9EE472B03089
-:100D6000B96F9A94857E4FFBF97D6E48F625BC2CB1
-:100D7000D8F627379D835BE82A8D457A1E9E84DF4F
-:100D800073D1D39CBF86F33FC742D76D5C7E73C9D6
-:100D900069D7168F8A710D4E3A77B9F83EA131297D
-:100DA000BD908DEEE63A78BAE7AA4F38E55BCCBB4A
-:100DB00037F9EE7D3EA787AF1D7EDDC63726DE8E76
-:100DC0007C985DEF1FF24B028EA6C9A58333D741F5
-:100DD00015A2F1FEE569788FD0DB642C7D40A1F788
-:100DE0004E57B43F43FADBA92716E6B0B3FF26F40B
-:100DF000D3C23DFB86A33E3BB2FF09E2C7853B0F52
-:100E0000BB717FF3EC8E47DD9D5569FEC775C1FA56
-:100E1000BEC59187F70D27FD8DFD67A1CF71D17FED
-:100E2000E35E7BFF8D3BDFB1F53F3FDEEE26FF6AE1
-:100E30002FE3BCA91A97E37CDFEC7001BE9BF4663C
-:100E4000BB32399B1DF4825817BBE36A82352FA24F
-:100E50007F522974EBA8FF5A961A2FE0BB89F1E75D
-:100E60005DFCDD4AD578D1C3E43351E0D671DFDBD8
-:100E700012BC0C748B1E6F73E0532BD226E07E40A5
-:100E8000AB8B8EB6EEBF4CF80B0CD906FFA2E0E49C
-:100E90007EF8DE15EEE3747C27568D70FF7568D200
-:100EA00064BAF7A8C99A2FEBBACDFB43BF1DF2BFB6
-:100EB0004B9341B7F0D7C889979D8D2E3B1574DBB6
-:100EC0007E605D1D3F0F36E7BF6E006CC2C723D644
-:100ED000493CDE3F7E318F3334ED3B70DCFF72DA0C
-:100EE0007B60183AEA2352473A1FDFB0DC734EC7E3
-:100EF000F1822E533C738436012AC42808C38B71B7
-:100F0000B68371DFD54E6980A9374CC7E70DE2FC87
-:100F10000DC7287FEBE4BF50DC63515E74645E5FF5
-:100F2000CC178A771452B4CF13CF06809C5756D271
-:100F3000933E803AF588D59FE4814DB49F4177E692
-:100F4000C93E69BC98F17666BFEB7CE3255C8F7087
-:100F50009EFDF19D367CE4A8989F1FF0791B94EFCD
-:100F60006BE61DE3604DAD462CC1249A31C935189E
-:100F7000CFF7DB249C5F29B4535A061D94167A35AB
-:100F80004925F85E267F970C7F8193790EF84EC134
-:100F90008E77DADF3728FA4B3146C784D8E76C2DD5
-:100FA000B0C7237D3B8FEB996BF26433FE3966DD6E
-:100FB000B725A08170E02BE2CF9375CB415EECAA00
-:100FC0003C0B9F29810E1E5FE6D82F5FA82CA1F352
-:100FD000FD95E19EE3BA968BF8F05CE56D7DBD333F
-:100FE000B700C1CFFD609297C7791BA06B567EC436
-:100FF000589E1A6BDCA4617B4FC7857CA8209EE3BA
-:1010000094FA50AE589A877CC5E8B05AF061103A0D
-:101010004527C7C8FFB1D91D4B201FF6AB88493CF7
-:1010200098282A71BF9AA158F940CE9B51D253DC1F
-:10103000164C637C62899BD92AE8A2AAA0FAAB115C
-:101040009E4D82FE4EFEB4C7C19A765D40E43C22BE
-:101050001EEF67A37F47EF8CA945018A7F098C6E3D
-:10106000B906DF6F55A14943BD1A30E35BC47D0F5C
-:10107000735FED7CF7C5E3888F7589FD7B46BCB84F
-:10108000588FE97E5C16BBD9B91E3F98973DCE09B3
-:10109000C6668F4B34EDB48FCBFFE6FEB3C1DBF1F8
-:1010A0002C01A11914D7A90ABFC584691AF9DB8FCD
-:1010B000EE94F87B1B0E7E3ABA2B7F387F6C47A3E9
-:1010C000F7CBF3C47769E7BE7D685FB584C0282895
-:1010D00024FDA72B0CFF2BA4915E89A50B76BFF3F3
-:1010E0009B27D18FBF57017CD7ED289B6307CE5339
-:1010F000350A906879B0C646E78F3BAFCC734C2E6B
-:101100007FD76AA6FC05A8DDF19D12DD1753E0EC40
-:101110003BF1BDABC6832E48B2F2E3C0FB3DBE89B6
-:10112000DB0D737EF1680D9304D820E0C1F5CBBAD6
-:10113000CEF499EC07DDC22761735D881B1DF8DED4
-:1011400073BDC04FDF68A1AD9E39BFB7664D3E4845
-:10115000FE9F187FFFB9DFF4525BFF20FC233AFBB0
-:10116000877C99E16790636EA075259A9F223B88E2
-:10117000EDA771FF91942208B7D39FB2708F44EB13
-:10118000D9D56C3DC3F7D8AE4E3AF6A38E782A1364
-:10119000FF4EBE9503C28E0C4020079E23A9D1743A
-:1011A0003E4B7277ED2F14B2C7AE7D484A523C7564
-:1011B000E799F9407857C82FF51A34DDC1569834AD
-:1011C0007F3BF0E709DBF1EED3ED78CFABB4E3374B
-:1011D00018B1E3D189E7FCB1836CF5E72B0D6E62A2
-:1011E0003E81EF4AF60FF1CDF424CD63219B474AAF
-:1011F000CFC4E7DCBDEB56A0BFA4573C3AF07796CE
-:10120000037F2760EF3E5E0A516FB125FE534D917B
-:101210005C39E5D0C45399D63181BE4582E4A70E2E
-:101220008B4EA47ADEAED4DBCE85AA3A427268C673
-:1012300029E775AFABAFC249965E77E981C3B320AA
-:10124000B7DCB5377B23F52E3C1F8748FD103C2FBC
-:10125000D728DD84F547F4B4DE1A349E0B221AA693
-:10126000B7887393A355FC5DA4F6D47BC568FFDDF6
-:10127000527DEC12B4FB1BAF8228EAFF6490AFBF33
-:10128000BB455A17E471D637456530D05FB0574932
-:101290004AE887D28C5F5C8076DB5E974EEB9F7668
-:1012A000EC37FF46E5A3343CC72891DB46E2B8ACF7
-:1012B0003EF9FB8FEE7D35F45D8B7DD4B5E7B661ED
-:1012C000B83E6D94616EB67D407D808FDF55F99795
-:1012D0006264CB05DE63B42F5FD969F7B3B9777366
-:1012E0003FDCC23D97923D7A60367F8FF3B123FC9D
-:1012F0005EEA2465C657BFC4F2E3FE53BC6304C66E
-:101300009499C53C9403E999F0313C333CAE17F114
-:101310009B8D7F95297E73DCF920A1BC8EFB23D0A9
-:101320003DD4D14DB369BD7A3234E920A6757B2511
-:10133000F21F351EE1EBDB980EBB9FE89C3AA61727
-:1013400058FF357BB97FABA6939F0F9CF3A2BDDE00
-:10135000B84E7BFEBC5EF8775940AC5B21283E9DC1
-:10136000F8DCBD2E6355809FA7D1BDB2889A7DFF62
-:10137000D519E47618C307CDFFE831882C63F3381C
-:101380005A5F3A01EF291D7D8F9F371CFD50999CB4
-:101390006D7FB539C0F965A39B9F1F6F9C1D482EBB
-:1013A00065F3D83F7BDE40DC57FDE3DF6303B59E8A
-:1013B000EC12A622645A138D7C188BF2D1C2EFBBBB
-:1013C000415B49B6F7934DB930E5C4948F92D9FE8D
-:1013D0005836BFE8A020DFFFD5CEAE94307EBBEB01
-:1013E0006989CE98BA9631B87AC0631C96F5477869
-:1013F0001AF7BC4B7E0AEFDEECFEEEA703219A7FC4
-:10140000D7B2F8D2F318BEBEC7843B8EF2E06E2B83
-:10141000CFD67F1CD693FF6A7B80F3739797EFC379
-:10142000416D2B991A44399978F10A06E75D4CFE13
-:1014300070FDDEE88A10DCF10540EFFF81B85F58EF
-:1014400076096CB9C9B25F3B18987008E97D28C06D
-:10145000E38FFAC42212C21DF9E8FD10F67FF403EF
-:101460000FD1AF54F88BCC764703E21C2E68FC8674
-:10147000F8656E1129C5482C14A91F0530620FC3E9
-:10148000B7457FA7E916A7710A634C0732780A03AC
-:10149000323F0F63FB34DC7F3482F913A7FD8A29C6
-:1014A0007F78E94DB5C4DD4B7BA55490E9CFD1DE03
-:1014B000400AFD328573657C8387D9A35EDE5F8732
-:1014C000DD6E450D8CFA177500509EEF8F4C7D6CCC
-:1014D000EAF19602AEFF5AD6A9A41F37A99D3EF4A1
-:1014E0004B971B7AADCAC62D54758AB7183097CB67
-:1014F0007BDEE07B0ABAEDA2F3001EF948C9EA1FC1
-:10150000393368E22BF60FC4D7F083C7F6A37915F9
-:10151000F1411FA4F72461F78C7B5BBC8B28EE198B
-:101520003476DF23B0EBA38D3E61C740DBEFF1DC07
-:10153000FE89BFAA747FA05BFFCC9E44EB2928558F
-:10154000CF207F9DF72BB13D10FA87EDF6082FE7EE
-:101550003C174B201C4E7D3316985E927AD73B4E3B
-:101560003A3323BC3B5FC69032EA2093334B7BA7D0
-:101570009EEA1714EBACD05327607CBF0BF5343FC9
-:10158000552F8E3CE3B1F08FA9A7D2FC9424BC3A2E
-:10159000C791C0DB9DD706A37E794E413FCAD109D2
-:1015A000FCEFFCA4841C15BC97BC18F961FDDE8B14
-:1015B0007CC8F7BB0E4EF4A2585D1BE6F7CED47D77
-:1015C000D3E220D8C77AAEEC02AF1EA8447CC88410
-:1015D00007456379CBF8C7DB2471EF52CF9F96E5BF
-:1015E0007D6C33BD36CCEF95ED3A38289FEF4753ED
-:1015F00044F76EBE17FE0B532E4C7E77F2B7290FC1
-:1016000009D64AB6D8118AD42EF68F763F4242D8F0
-:101610001109F3FD997809D9878B847D98080C5DB1
-:101620008D7FE6A02555ABE1B9C7A2E0208AAF5E69
-:10163000D497E3CF890F336DFC80D98B9638F84669
-:10164000F518F9C71A3F70DBBE9BF8CD851713BF9D
-:10165000E7227EA58F8FDF73829CCE4E3C7FD2F92E
-:10166000975D3B36EB7DBE7F95F99F07B1273BC960
-:101670001FCBEF9398FC66EA8F9AEB5A13797A5A4C
-:101680005F98F7414CBD63EA97731ADA9EC9CBA203
-:101690003F9C7A23E2D2BEBB86E12FF2B300BD7736
-:1016A000E2D423EFE12F25E477BB3BC8E07DE4D90A
-:1016B0003765F49B3CF6533677561ED957C7FD82E3
-:1016C0001DA776DE65DAADA6BDEAAC67DAABE6BA91
-:1016D000639E37FD3A187B00C797F630790A617C24
-:1016E0002CDF271F0CC41EC2EF790C663FC60256C2
-:1016F000A6CAF97ED62EAFB9E433CF217FED299566
-:10170000D6BF385BFF8648997098E3D707C5BB0200
-:101710008CEBD0AE29AB013ED842FE6E40D970882A
-:10172000E1FA8CD74B719EBF1276D97362BD31D36B
-:101730008381E80184DFA542DC53FDF1E136FD8BB6
-:10174000BF0E1AFBB13FEF6483E6D15F8308DAFB7B
-:10175000FDD57629C2E0286CD0A56E678FB9AEB3EF
-:10176000FEFA4FD1E9DD8FFE78A700EBA37D9485CB
-:101770003E7F0EF2B8A605DECE67D1846F9CD234D0
-:1017800039D4C3F97AFA3D8488F073D9E3408E3EA8
-:10179000F5C2003CFF7CE507EF06F15CEBBFD463CC
-:1017A0004184F3F525BF0FE27D885796F0FDC7957C
-:1017B0000E3BE784C0DFB450F44890A5DF69FEA873
-:1017C000C6F60EC9627E3E737552C14D6937BFCFF2
-:1017D000DF9147BE3D33BFA0BD8F2D6FF2E9020FF1
-:1017E0008FDB72CEBF2AC4E368AEDEB9C5DD5FC74A
-:1017F000F163FF8DE3BF2EECB8D77707C9FF61C255
-:10180000336BE74837E2E1BFF67AC4B97F878BE3F1
-:10181000DF9882E77331410A279CCF3E9D47FD5DEB
-:1018200075BB4276C74C36D662C6DFB1BD57D33ED4
-:10183000DC398FAB5ED127F563F4BB6A9544F62A99
-:10184000D65FC2F821B678259DE339E73933EE88B3
-:101850001F11768533CE64CE5E7EFE5E0FFAEAF10E
-:10186000E559E24EF65E4CE76E737AD9F7948784B9
-:101870003D5103E760DCFC09A85A5BA5F7BEEF7990
-:10188000BD192888ECCD662FA5479A359E0AFD39EB
-:101890007FCFBE6789CFD48E1A94FB5D075FCDFBE7
-:1018A000969ED6E35FDEF2EE3377B3FC28E07E1E31
-:1018B000D3DF3E43E0FD02A1CFE7087B61D4073DC3
-:1018C000EBF319888FE199F09A7A7C06FEBD410B03
-:1018D0001E4CBDEEC4C7F18383F3903FEA42CEF3C2
-:1018E000E64F86975CED1628D9E3194D393A12E494
-:1018F0007C5DBFEDD215A56CFCC453AF9DD1C9F57D
-:10190000C421D413269F0234B9518E9DFC68F2493C
-:1019100037DFEDBD99F064F20793ABB038E70CE325
-:10192000FED0C97FBDC53775B93ACF40BDE0E4B33D
-:101930002EC7BD6833BD2CC4FDEFF5BA3109F7AB36
-:101940006CB959C1CF03B93E7A5D6D7BF64694D729
-:101950006D5C5E163CFED04F500FCDFBF1ED21D4F7
-:10196000436FA86DC5385EC3F6E5213C577F5D8D9A
-:1019700087B0FD1B49256BFCE3CE9064BEA7618B4D
-:101980009380D6F82528C7FFD8EED2F01CAC71871B
-:10199000879FBBEFE67863797EDEBE3B7B9CC4BC51
-:1019A0001FDD5EACF3B85B7BBCC43617F92FD0BF2C
-:1019B00086C3E43A2FEE3E7F6EEFF93CBD71B788E7
-:1019C000B3D97D71D67809332EC1C9C79B1CFCCB16
-:1019D000F0437EBF38838BDCEDE29C3C71FF9DC3FE
-:1019E0000F33F88E6CFB5548AAB2FAE3F979FCF193
-:1019F000F6EFFED02BE7E6DF2EC1EF697B229935AB
-:101A00007EA2C1950AE1BEAA618B8BF6810D0F29DA
-:101A1000F45E1DFCD143EBF9FC877EF68773197CDD
-:101A2000F31F71154DE1D3A03809935EDD712C824F
-:101A30003EF31EFD193F5FD6453C8BA0D3FC47F615
-:101A4000B9312EC789CF89EDFBDC9D8E3808A257AE
-:101A5000FBE149749FF0FEF7DDB8CEBEF1B404FDA2
-:101A6000CA33DBCFDDF2B310EA0BC413C50108BAE9
-:101A7000E58E5B4A5DF2D3D1548FFC76BDD17109FE
-:101A8000CAE218E2F7877FCAE098FB9287E2A7E6EE
-:101A90003E7C1DC519BDA63671BEBF677931AEBF8C
-:101AA000735DF1628D52FE7DEEE6EB891FE73C7FB0
-:101AB0007DB1B88F54C2FD3DF1129CE7559BBE49E4
-:101AC000F39C0D31E2C7B9F72851F4B39C5061F291
-:101AD0002359E466683E979BD7B67AF0311D784D5E
-:101AE000F839E3BF53C4DF8B749E57F177634E8898
-:101AF000FDF73F43DDE78D5EEB7EAC71DBCA0EA4E4
-:101B0000D39B038C7E1AC513A87181377A7F5D79C8
-:101B1000FEC27E42BFD17B37A61D3411BF63FD0ECE
-:101B200017BD7B6369677BB76691189FC1ED9746C8
-:101B3000B0B438BB1FF49BF9921907CFE36F4C3E4A
-:101B4000CBA507B6F17896F70E713D83713954DE57
-:101B5000E14AF5B3C5E3786CEFA2A4E34C5C42CE56
-:101B6000EDE50C4E8A97E9C6EFD312FD3D08935F71
-:101B700066AFF7D8E3F3BAF9C7F96E8F3D7E668E8C
-:101B8000C32E33D38CF53FDF715EB7E9D4E2671A19
-:101B90005C498A7F6AF8A387F6270D0FB9A2889758
-:101BA000B7763EF3876F31BE7FABDD9463BBDE75E6
-:101BB000CAF1DC5D63209B1CBF158840563966DF87
-:101BC000B3CA71207DAEA1C367AF77E7E4D0BB5F36
-:101BD00075E093D90DF91847FCE603F30792BFC2ED
-:101BE000815F53DF3AF5E8AB219DF09C19EFC7D731
-:101BF000FD743C26C7A3C99FF31E5C40E374F3B198
-:101C0000C9A7261FE7881B73E2D3599E8FBEB33145
-:101C1000997E91782D54E2DF694AB881BFF726FB9F
-:101C200023C8BFBD9D77FE36BFDC7CFF6D04DF1788
-:101C3000F2F3CE4840C3BF5881F7E5946CE7EC91CE
-:101C4000897256FBFF07F9DC4E42B72CA68FE7736B
-:101C5000FCB52851E1C86BA77B0C74B68A7016845A
-:101C600048CE5C224E85F54CF7D12379F2BB3AEB96
-:101C7000E3AEB5072E52D13F3B4ABE6E30CBEF5A92
-:101C8000FBE2452AA377E43CF9D1412CBF7BED1F51
-:101C900079F90879948BB1EA8EF84B17D5B1FC42EB
-:101CA00031EF85A69FA4658CCD4FA2CA87EFC0F304
-:101CB0001CF5A7FCEF11AD6672EFAD4E9F33E779CF
-:101CC00020EE63F93C374B597E45F9EF57E026F299
-:101CD00057FED8867CC257AD8E783EA279297E67A2
-:101CE000D11317521CE9E3F9DC1F7DF6A3E7D1DF1E
-:101CF00075FC0CE1B83FBF6F6E385A5CBC9F23BBCC
-:101D0000CE9E88783E7B20FAD4D2F4A85675FAEE9F
-:101D100063688F73BB3F8CF75B12056EEAE771C196
-:101D200067A79A9A712F4A1EE70B255F6E7A84A5E2
-:101D30004F0B7EF88F7CCD5C8768DF7DF4A97E5BDE
-:101D4000F9BB31C7CE407A2BCAF13FA3BD79ECDB9A
-:101D500079F4F7475EF273BCBDE4E778BB3C7F8D56
-:101D6000EB2CF6BDDA7BC675C8F42F493BAFC774C0
-:101D70008B16FB25A707A4B0DF6F5DA9F07E034D8E
-:101D8000417C374E32B81D2E31669AC1F0913040F9
-:101D9000770F4611B6C77F284AF5B1148D1FB48D51
-:101DA0000F656CDD64727EF9384E2F865B5A475F93
-:101DB00018CBF3267CD39383129D3AC1F327846713
-:101DC000A4273900F753DF626615E77BFBBEBECB65
-:101DD000CFCF37BBB0FDF074FC40E3DF64DACF3621
-:101DE000E21C58FED12320FE5E217F5FC7F47B8C6E
-:101DF000FBF5B5E4FF1EBD673E8F3311FE2EF33CAD
-:101E0000BFE6003F9F73FAB7CE8335A44FC739F4BE
-:101E1000E8797BBE4AFAB5B7F3B97F987AB5144A28
-:101E20004FF37CEEA3FC53389FFB1F7622B26E006B
-:101E3000800000001F8B080000000000000BB55A56
-:101E4000097454559AFE5FBDDA92AA54AA2A45082D
-:101E500004E34B0224210B45122004D42220D0316C
-:101E60004A801681F64881B298AD98B4DB699D43EB
-:101E70008520D2DAA319756CCE69BAE785D611250B
-:101E8000E92924D1E05432C52204254E9045A01DF5
-:101E90003BED7423DA64313D824BF761FEFFDEFBDC
-:101EA000A82541E93E67C8E1DCBAEFDD77DF7FBFF7
-:101EB000FFFBB77BDFBA4409600CD03F1D2403D47D
-:101EC0009BF19702307C3C2311F200F47A00D9098F
-:101ED00060546428C1F62AFDBB0DA06D338E338596
-:101EE000FB6F252A6C9EFC53F6FBC1462DAC868207
-:101EF0008879ED7CDEDB652B4031CE7F1154533A7F
-:101F0000C0B4BEEC9FCFC1BEA1DB002ABD979EA08E
-:101F1000FB6775AA1F459B71ECD74521BCB435CE34
-:101F2000560053F195293A50CC6C5EB88AFFE39481
-:101F30007850B2C37D4BB633AA2FC7DB764122FE61
-:101F4000F07B7A53508E227E0B12DCE3A3E679DB22
-:101F5000B6A89BE42EB2AFAF20B9134B32A2E681F4
-:101F6000E3FA4FFAB09F8D7F573300A643656208AE
-:101F7000E52F844A8F84F2BA3F027708E59F718A81
-:101F80008FD39E7387FCB217712CF928FA7A2944F3
-:101F9000F4719EC73EFAC27138429EE9F604D70535
-:101FA0000BFE180FE3AFCAA3E2E80E114EA7643789
-:101FB000AA01EA8FE12017B69F810A88DB342848FE
-:101FC0000486AB0C2AF6DF04EF0B73B0BDB279C800
-:101FD000717852184F87271ACFA445D1788EA98CD3
-:101FE000C673EC8A68DCC679A3714ADD3825EAFE3F
-:101FF0004D9B0AA3FA373F561A353EDD5F16D5CF03
-:10200000DC5E1E357E52D3D2A87ED68E5551E37348
-:10201000D4B551F7737757DD90FEF303F551E362C2
-:10202000F53FB5E32751F396CAF7CA9011E6811F31
-:10203000FF880785A462D23FEA210423F53FD3E558
-:1020400027C6FFCDFA7F98F49F1BA17FF9DE44AF2E
-:10205000356C6FB1ADA6D79FD05AC7905E714E1444
-:10206000EE0AE919AF0D1AACDB256C1DC89D7BF19A
-:10207000FA63667EFD5181CF95B83495D6EF081E80
-:10208000FD5AC216D5C2ECD0FFB1456D44DE3C2AE4
-:102090002B0DC4AB17E54A09509E54549D2E13795D
-:1020A000A4838D01E4F7B33ADDEACA08F99EB3735D
-:1020B000BFF29C5DC7DA5F18D156F1BDA916F09B3F
-:1020C0000BD973B436FAE7015CB72D8981822F2CC6
-:1020D000DF3E7F0EDE77F4652B0E0033F56F01389F
-:1020E0001FCFE53D1FCFE55C65521AFBC87FC8EAEC
-:1020F0002492A7D9EEDD69C7F79C979E30E09BC17B
-:10210000E0F21BC8EE52CDE0B7E1FB1A0DB0BA12F7
-:10211000FB0E7049F5D826C24E3BE18B62285791E1
-:102120001487AA7213FBF0FAFB24D138B231B70E30
-:102130006600ACD4FCE1C61CE60F87718DBDA450CF
-:10214000BD9208D80E3F90C9AE9FBB0FAD10EDE910
-:102150009C91E3A1E17051F8C9CF379B597B69B3DA
-:102160003DCA6F6E6C7E2141C179CE65C3A2400429
-:102170007E5D84DF746A6586DF80FAC7648267707B
-:10218000DDB79349689FD4BBCD8A439EDAF10F95A2
-:10219000807A30B62DF1A34E60A55161E3B5797C0C
-:1021A000C1B940381063E9FA3D1FC22692EF9E6F15
-:1021B000B18D785F8FDDC0DED743EFC376393676D9
-:1021C000C46D39EAC541EDD1390BC82EF07A48C249
-:1021D000FEE26E30903D2CF1A61B489E93E03EDD62
-:1021E0008EF29CB52BECF91F42A581E43A735F6D2A
-:1021F000028DBB369F360F0AEBC078F2A1C36F4841
-:1022000046BF35748BE4DEA5B0F799E97AE5BDA940
-:102210004F5A95F0FBCE80B7FF34EA7B29B8D9BC82
-:10222000DAFC6879517EF18D8DD5BF4BCA207FA82D
-:102230000333F9C34E13F3878355575A5FC2FBAB81
-:1022400053FB6E32E273E7ABBE9D4CB8ACDC21832E
-:1022500082FAFF24C1FB07FBF4301EE71EF873026D
-:10226000DD5F65525F7909ED00F698DCAF003DB7A0
-:10227000873DA78D1BB0CFFD8C78072508D4ACEB2C
-:10228000DBA786FFBCD773C612CF347E3D28F85536
-:10229000FF5AD658E2537DC2357EF1FE2B996389F1
-:1022A0005F3324CECBD879BB905F4A16AE1B79A59D
-:1022B00020AFBABE2A4B223FB1EFB8B388E4D48333
-:1022C000F76AE4BAF6BDBF2A97EEC359D70DC94BDA
-:1022D000B6E94739EF012E678FB08F15C1A422D21E
-:1022E0003BDA9DC581E356FDC76BFDBF257C3AF700
-:1022F000BCF2388D29BE313C34FFB4379EC7231061
-:1023000071CE2D70C13897AD47510721DE4DF9C20E
-:10231000F5FCD65EF20BC8AB2B3A747C99E4AF2A7D
-:1023200081FC8205DC0AB5E865DE9B8D7A6C3CA0F9
-:1023300083A7B16B23A7A6F99F12ECCB3AEE7FB02F
-:102340006F4EC13822FCD324C7BF2EDACAECC76354
-:102350005D3383B9442657F1E1AA0A7A2FF4A21F0C
-:1023600047592BF18FE2C16CD874280EE59CB1035C
-:10237000F3031C37F32CBFAFF9F55921DD1A6322A3
-:102380008DFBD917B28D208A8E03B30F977F4AF346
-:10239000CE8688E746890FB31C7F5F7C98EFE0FE0E
-:1023A0002190CDFD7B2014AFFAD3D9B44595F9C85F
-:1023B00017278F1F2D8839D9B1511AC836A31F5E30
-:1023C000E468DEBE7D02D26122C785FA8DF45B2906
-:1023D000623CBE96371E9EC2FC21FC05A522BCECC9
-:1023E00042E618798AD1EE78307647E59DA123DF61
-:1023F000D8FA701DAD4EE5BF485F4398D7905F880F
-:10240000D3F7191DA3ACEF4DF2AFC8FFE71C3A2676
-:10241000AFB943F2A8F87EB3E20109D71067B74F0E
-:1024200093A5F0F832078F4BB547CEA719515FFD42
-:10243000BAE3B63C9CBFA6FD0D1B2E1F7E6CF3AE0F
-:1024400073E03CD5E73E9841A10B199E5699403860
-:102450006524923DE5EBC1AF2F1C29876F072E063F
-:10246000295FB72389B5391D125B9F2FC4D739D097
-:10247000D1E88CF41BD79EFBCFCEF1A4B73D6360AF
-:1024800005F9E3FC60D106E231C962405DBCFE554E
-:102490002E9BEF09473ACFAFF5A0A7EB00AA6E2914
-:1024A0000EDA63C0E770DE81AF64364E9B37BF63E0
-:1024B000AE6C471EE5859A0E525E18173429A4E7C4
-:1024C000B89781E3128C637ED1D7B510287F1D7435
-:1024D000805BC2FBADF1431F132F863A4DCA2E8994
-:1024E000F06B0227CEDF6AE4F133070DE10D6BF8E4
-:1024F000BAF6BEB8E0CF81FC15F2C3A3D27D7D133E
-:10250000DC628DC43D81C9FF4B07E7576B7C486790
-:1025100025BF8F9CDCC5E40ACB09ECBD9A9C39AC85
-:102520000E68350E5D78DCC5E4B2131F7280CB09EE
-:10253000C12CE5157ADEEE61EB88B32B6EBF345209
-:102540002E5F01E6C56877CF6E816B764E76EF8B96
-:102550000FF7CD6813AD1920FCC229968784FBE8DC
-:10256000B04AC2CFBFF1CF67B66F9DC3EA23BF8C1D
-:102570007CB0609BE0A47572FBC2B2C933A690E345
-:10258000E0469C2C667EFFDA78E4BB95FA563ECE98
-:102590009D68B7944BCC6E80ECA64EF89987A4D07A
-:1025A00085DB50B55F860E1628284BCDD1B7196F45
-:1025B000AB75C197F2F17E59BC3748FEF7AD8F7409
-:1025C00060C3F57FFE5A9C5A817864EF6F4EF658CF
-:1025D00047CEF7D4D92DCFA792BEF74B0A228D79DB
-:1025E000E1501AC95717FCD4E8C17661C7EF8D14C2
-:1025F0009F5639BD47C80E4A3A1AE6117EB3A0A9C4
-:10260000D16E657ED14B3C0DA470FF317C6AF2AE79
-:102610008608BC2F3978DE0243DE9BC96E82C23E3B
-:10262000BB28FFC1B65DE461ED0756662AF9E1E714
-:10263000FC70301570CE2D70389570D6AE0FAAFA9A
-:1026400045C4A7DC33E6D59E08BE5D10F67E41BCCE
-:10265000EF1F9DDE8F0887EA039F186DB82EDF1FDE
-:102660000269149F0298A7D9BFC32FFA62ECC6A7CC
-:102670001F32D278DF45607E04F5BA3511F5B4E734
-:102680004CC7943556263F24E2BADBCF9998DF6CCD
-:102690004FE7F6D770FA7201F9ADCB9DD537135ECF
-:1026A000EF3B0C1ACFCBE2C99EF602F3639A3DE6EC
-:1026B000913DA2E879C4F362EAE7B0F95A8DBDE52D
-:1026C000CCFEDA7540F6873C67BC479EDB29FFC825
-:1026D000B323EFD9F359CC9E5B7B31E061DF8F7E72
-:1026E0007C12EB972DA37E6BEF7C3BB3671D425BA7
-:1026F0004876193AC8E609604C23D549501999A77C
-:1027000096396C4C5ECD3F563AB8FF0F642B896EFC
-:102710005C8F4596A3EC20225EF2BE88A72B9F37E4
-:10272000FCF4C509644D222E88BCAC4BE4C1E02DFD
-:1027300062FEFEC72296D5BF53BAB805D75BDF232A
-:1027400073FF2F787250E4C98737A7B03EC50B05D9
-:10275000F5341D5B0FFAD3199E4DF3D0C6A064511A
-:10276000D3216A4B2B03F3107198B3A2F790819B8E
-:10277000732EF1AFEDE00F72F5C4F77326884311A5
-:10278000DBBE19FAF875C4E1912EC47F94B884CBEE
-:1027900061FC4304181FAFC79B41A9EFAED96E4C33
-:1027A000F99F1FFB037D1CDA0F1103F1C87B7ECC60
-:1027B0004FFD2850BBD333D58938FE36C93BD58968
-:1027C000380E9EF826997C7AFBA94F6CE4EFDB8CDF
-:1027D0009E5CE2595B06D60BA3F0738293F3A7D8F5
-:1027E000149DA76BED5227E7FF643F3C43FCA96BA8
-:1027F00093ED2AEABBBF4DF618318FBAE0F126EB14
-:1028000011D28BE05F3E9BE2BBA87FD771D8611DE0
-:10281000E52F1867D6BF6888AA4B6BC4BE4616F46E
-:102820006D4B459C7C2F4BACAEDD18938FD450FE86
-:102830005240F545B391D653F572CC3C94C714D0B1
-:10284000B8EFAE73973AC53E472664521E833C628A
-:10285000F5F4D069D9BD8B62A01EBA4DC8DF3D3AF0
-:102860008E13FA4D668F5A3E637279E691DDCFD3AF
-:10287000E28AA85B875A2595D9CF6EF4F3D82FBD8D
-:10288000A83403C7E154CA0C5A0FE765A99E8F2FDD
-:102890000DA633FB2BF1603D8FEB5E8FF5BC4AEB51
-:1028A000D6F23CD5C0D68FE197E579B3406DB4E15F
-:1028B000B80DBB25B6EF53BDDB1095E7F9043E35E7
-:1028C0003B4E1CA172B23610735FE0E38BC1E70D83
-:1028D000FA316B244E8F3A45BE97066991F91E7402
-:1028E0003B47AD0B347CB43CFB4F069E5F7C20E63F
-:1028F000D7C6FD8B93D7E7751E60FB4735AAACAAF8
-:102900003C1FB4AE41BEDC2FF872BFE08B0FF8B8AD
-:10291000DADD921AA278F533AE7733FE112EEB0290
-:102920006B16A42A23795525F0D8D86260F92FC0F8
-:102930002623D9E7C69D31E3042E5531B8D479A5B5
-:1029400018F9783EFEB7CA576DE0FB35D5C82FBFE2
-:10295000F2FF276FACFEFE5DD3DF149812A5BF45D2
-:102960004937A4BFD83C79EF9129167A7EB83B83CA
-:10297000ED4368BC899D6781C8B317EEE0F9687FB5
-:10298000C73C4B3ED553C7F56E09E729EAF95F5BB3
-:102990003EE251D82943054E31182C7AC68FEBDC24
-:1029A000D73D719982F1A1B047CFE24B514FA14A77
-:1029B000754D614FA1253381194F12D50B380F8BFF
-:1029C000CF83C7279ECC233FDB3DBF98606F385E27
-:1029D00068A13C621FF07D0DA9A738A92F22DE74E3
-:1029E0003BF9BEC6B694FF7996F2FC857B0D6ECAA4
-:1029F00047161A86DE9FEDA2F7EBDD0DD8AFE95939
-:102A0000BB258EF4FE9AE4A674FC486FBDEB47A488
-:102A1000DFA0C16E62F23E7C90EEFB5B24F7241CCB
-:102A2000EFEBBC3DB715FB85CD456E82597B5FA1B1
-:102A30004379A182F2C5711656C72FBCC9C0E2EE18
-:102A4000A5F1965F53BE54E5695E40FEF8D2DBFB0C
-:102A50008CE40F065B2548C1851C4939F41B3FAE49
-:102A6000F3D29B278C9494CF6B3B61ECFB8E7CA2C2
-:102A70005F9521C4EAF72623D541B5CD5ABFCF488B
-:102A80007AAA14F955DDCBBF67FD2AAA13F07D554C
-:102A90003B6555C19F873ADF3212DE752D128C4D92
-:102AA0008FB8FFB2C4EE6BBC5F0B9C076B857FAA2F
-:102AB00016FB90D5B40F89D7613BF7371AEF1FD8B3
-:102AC000BDE40885EF754DD17EE841C1F30D549703
-:102AD000B2FADB6B24BD6ED811334EF0FCC1EFE1CE
-:102AE000B93549F8F31CC8219E5F9ECBE3C9E513B5
-:102AF000F1963C5CD7E563B21BE03BF9CEE2EF71A7
-:102B0000912F0C87742C9E69E3063AFECCE28DEF80
-:102B1000F8B091F2DB05C12F983E2A8207E613DE5A
-:102B20007782B786F0BB3368B193FD57F4717F505D
-:102B30001E34A9B40F7E2704B6929E07BB5EDDEA61
-:102B400024DEFC1BE70D087FB741E0BA41E0BA0183
-:102B50001D7E12BAD8AABC032F61BA0FE5C0FD5082
-:102B60007940F8A19DD13863E4B98FF4551734C189
-:102B7000D378FF0EE18FEE68E1FE28364ED6897DD0
-:102B800080C171B98BD97E2BD6BB94C7D5B444E331
-:102B90005F27F605EA62E2F0CD497CDFEEFBEAFF53
-:102BA000583DCD8DD153C510E74F39C53D5C7F777A
-:102BB000684B1EEDDB6978C5EAA95BC94C1CAD9E6C
-:102BC000D5DAF745DEAFF517237129DF0CD89BACBA
-:102BD0009175FCAB493CFE54CD92FDA4E76BF5CE5C
-:102BE000C443058A2E5CEF609DB332690CAF7BA6AF
-:102BF000E1D44727C8E07285EB9DA7525EA828A4C0
-:102C00007CA585FB9181129C2F91F27960FECBD738
-:102C10006252A94EF1217F589D43BCC1B63228DDD6
-:102C20004EBCC1FA611DCDBF84B68E1187251D3CF7
-:102C3000EF5932FF0BC6B76313F97A87F5CAD8D1BB
-:102C4000EA09AD8EA8FB8AE7A9DAF53AB47B1A5FE8
-:102C50001794585DDC76F0EBB474F49F839D57D2E3
-:102C6000D660FBA258BF96A70E619E9A21F214CAA5
-:102C70009FD77395C1064C871F431EAE17710EA4D4
-:102C8000ADCC4EEA28D925BEB54B7C1F673F5E9878
-:102C900089FEF7837896C70C9CE1E743F4FC139810
-:102CA000470DAC0D1C76E2F8CBAD128B7FEB31C734
-:102CB000BDB570A4BDD70A5E36C01651976D656D5F
-:102CC00079F6DE4F1E277FD46256C8BF0E74341AC1
-:102CD000D9FEB21AF17CC6C87CA856F0B7F67BF6CE
-:102CE000B55E4D127152F012D7C1F2DBC163B2DD95
-:102CF0002431FC7E353E122791FFB41D8C637A1E71
-:102D00003C615529CFFF5CF0EF92D8776F2891197D
-:102D10002EBA59BCCDED7A2B83F44A7AF0D23E4AD2
-:102D2000D75B533C6C9F4F65F654BD5BA6C3BEB0EA
-:102D3000FC010BDB0BD5FA1ABE3E812FCA35D9E850
-:102D40000ACBD5AEEFB3B947B11B493AC8F4A69345
-:102D5000A2EB5CDF7EB9528DB0275CCF6AF26FFBCD
-:102D6000053F403F944C7EB9334961F23504B99E2A
-:102D7000759DBCC5F72FE7FB3606F6FE11F7CBFCB9
-:102D80003574FF72BA05184FBEF25750FF910C9977
-:102D9000F9A9473EA8CA8288F783C4EB719F6128CE
-:102DA00099D5C327744C3EDF89E1E48956F283CD7F
-:102DB000F3ED79E4DFB87F389261D948FCF6D37B34
-:102DC000C786E75998C4E33CD07A53289B7991CFC2
-:102DD0002BD6BB0596321CB6089E75897C14EBA6D3
-:102DE00033648FB175D3F5F2DD88FA8D3D7F79AE0E
-:102DF00072F247C883C2637A3FD5EBFBCE723FD1F4
-:102E0000D0B9E1775407FBCE9B80FCC4235D1BB295
-:102E1000280E83D73B95F2BBCB5D0F4E65FB97D257
-:102E20001626979FE44BA1BCE97432E543B59DA7F4
-:102E300093595C6F9FFE02E5499817DD41D7315FDA
-:102E400061FC2BEC2966FCDB77BC3829930407B7BF
-:102E500085E6AD3DA6AF247C6A8F15BF5741F94B7F
-:102E60004F19CB93B4BCA888EA71CA938E4D8CCA13
-:102E700093FA057E8307E2D8FE8704199C3F303120
-:102E80008A3F356DEFB07CA2A643F644F2E8DA73D0
-:102E90002E3DE38DC1A5B0F91A029287F1632F6F21
-:102EA0006B3AF6B1F5551B024CDF0D2D067EBF9532
-:102EB000B7004DEC793F38FD84C77B7409F5506E3F
-:102EC0005427D0FEFABBE9BCBE88D5C77617DF4FC2
-:102ED00078F79CF766E2CBBB73BD59F651E2861FCB
-:102EE000CA78DD2D09BCDB0C2CAF8C1DB7CDC5F726
-:102EF0007B6C491075DEA8B5F52ECE9F7223DFA737
-:102F00008ABD7FAB8BD7CDF8EF191DF2E26485C186
-:102F1000FEB4A827C6A1BFBD4BF8DB65771A58DE03
-:102F200071529C33DDA5F9DD121EBFB5FDFE253BB8
-:102F3000E1492CFFE14BC863E7604B3CD17EEF6E6B
-:102F4000915F2D5B14735DE453777F4F3E35C3254E
-:102F5000FCE16498CCEB06AB85F645BFEC36D86552
-:102F600026B73AB1327FE43A357F73449C0F75A39C
-:102F70001FA4B621E743B64FF5EE8173BF71303F12
-:102F80001A07197CDF91EDD7D75E67BFBEE19A9D26
-:102F9000FE308A779A9EFA29CFCF1BA9A7A502EF08
-:102FA0005AF325233BB7844DDB7572F89CD264F04D
-:102FB0007A52711D868EB9213ABF6CC831B17CA995
-:102FC000FF7649257F8F72A69922FC7DFF389E7F70
-:102FD0003DB25C62FBC207723E6471BC36D46B24A6
-:102FE0005E4D6E5BF324B35F3F9CA27A49D3E762E8
-:102FF000338F9FD7F4A8AD976E2AB43EA79FFB6589
-:10300000176B693CC5CBBB447C5C5C12ADBF2CE844
-:103010005D40FB23F77824962F5D4FEF4B574C7B99
-:1030200087DCDF8DEAFF9F5CDE875D64EFBDC3CB8D
-:10303000697FF7DD9C4FD328BED65D87CF7E81AFF9
-:10304000CFC2CFC57C167E1EE6CE521AFB101FBD26
-:10305000C3BBD945FB4FBABFD8A600CDD3F7AB7AD7
-:1030600089F4030CFFEBD9D13631EF36979DDB8B1A
-:103070008B9F0FC5519FECD9A04E203F0179377629
-:10308000CED7B0FF6801E969E0C0B10263843E2F8A
-:10309000D5A33FA0F8D2792859B146F24D27F8A61A
-:1030A00067AD242D1571339A7F97887FA4FFBD8764
-:1030B000EEA2BAB0BF6D994B5222E26AFB49DBA483
-:1030C0008879FB83321B8FF5D8E4BB1322E57C9211
-:1030D000C9D91FE0F301F44D5E961F79BF919F1B84
-:1030E00099FB188F9FCADEC4CEDD351EEB81F3B885
-:1030F000AE6309B03825D61D30E20FAA33BA4C2A88
-:103100009D53D07EBB23C24E8E0A9C67627140FCE9
-:103110009C057E99E69D8933DE4B7D3D84E84C6EAF
-:103120003684647EDE3D0188D73304AF67EA430707
-:10313000A402368E9D4B95422F1B772B0CB1D603E4
-:10314000763DB565E0666D89397407B993BC4080FA
-:103150007D97144AD63B2E98D951298CA6BFF0FAF8
-:10316000F57041E3290EC6A487EDE3C78E1B1676E2
-:10317000EFA6DA82F4DC0F6C1FEE16E893E925B3B4
-:10318000F5B088BE27BB450FE6789477EF611DB395
-:10319000E7AE3E45257FE64E12CF7D86CF617FA606
-:1031A00087DB2D8520FA6E455B6F2C0EA5381FED51
-:1031B0000BCED463E5CB700CB1F7DD4682E3BAE702
-:1031C00082A2A7FE1F5DE9623F85D769F3449DA6F1
-:1031D00033FB191E7F12F191CE736C384F69930443
-:1031E00067E97C2693AF579BBF14B3C1C4421ACF83
-:1031F000E31B6D859F75F2731E1B3B9F9B6F27BC66
-:10320000A450B2EEAAE5C6711D4C0626B7EDFEA18C
-:1032100081C78BC3E75DEEE0D1B3F45D8EE4F1B01E
-:10322000EF7ADC666B88F27364C7A5C8BCFBAA6B37
-:10323000ED5FC9DE25C5CEF0022F28947F8C0D7F6F
-:10324000EF025793C2DFD3108C1793C3E7FBDAF773
-:1032500035BBD5A58A0EF5B2C26576935E0ACD69F7
-:1032600045540F36DBBD7F75B1EF6C5A26B1C9F4FA
-:10327000EAF4CA8430DF2DE02921BCB5737D49E82A
-:10328000EF7AE7F664ABC4730BBA7DFA2EE819B493
-:1032900017B373B4EF8FF8793E5AA142DF1DC11303
-:1032A000F314FA2E609BC3EC7E5AA2141FD7670951
-:1032B000AFAFD1CCBF276834F3EF0260EB74B67FB9
-:1032C000F690388F68B4EAB2A9DE6A84783795F44C
-:1032D0009ABC0F25703E3EF4DF16763E1A2BF7D7C8
-:1032E000F1DE9C31D3C3F23F2ABBCF62EE1385E7F8
-:1032F0001C0D4F5D18CF156A46639FC2F09B46CFE9
-:103300004F33A937D1BEC82A13FF7E49C30D15CA52
-:10331000486D17FAD0F0B393BE691D1ED4B7C69797
-:103320008C307ECFC473DC0CF4E544267B56217FC1
-:103330001D8BCBFF01AF6B7F8EF0290000000000DA
-:1033400000000000000000001F8B080000000000CB
-:10335000000BFBCACFC0F0A31E8143D1F8E8389D13
-:103360000F534C941182D7B3E0D78B0D5B3122D829
-:10337000FEDC0C0CCA9C0C0C2A40DC07C4FD40FC93
-:103380001E880DB818180C81380DC84E07627B20B6
-:1033900076E386E869666760E806E2C9403C9B9D83
-:1033A00074FB39241918A6C822F84F806C4505D241
-:1033B000CD19C54313F31BA1F235B451F9C1BAC0FD
-:1033C000F481A446539B34F34F01F59E36C22DAFD2
-:1033D0006E8ECA97B344E52F3343E55F7487D00000
-:1033E00093DDE134B803000000000000000000009D
-:1033F0001F8B080000000000000BC57D0D7C54C52C
-:10340000B5F8DCBB77EF7E6F361F840D24E1260410
-:103410001230C125060C56DA4D0405451A502BA86A
-:103420004F970009C857502A69C57F2E49080102E5
-:103430002C186B50C4E553ACD006053F5EAD5D1053
-:103440002DFA7C362A2AEDB318104129D014A56C28
-:10345000DFD3F29F73666EF6DECD6EC0E7FBBF7FF3
-:10346000FAABC3DC993B77E67CCF39676665D14C14
-:10347000D206107209FE7E44C81813216444B42495
-:1034800015AA404612F2532BC13FAD5F6CD9584785
-:1034900048D842486426211D4EDA51AAB192425AB8
-:1034A000DE7EB348D2094982F715429A849A4303D3
-:1034B0004B0851B344B29D3E5A9E393929E04C3CE9
-:1034C000EE2E3EEEAFEAAC58B6D779B07CBECE8BCE
-:1034D000E5DE3A8584F30979B1AE00CB97EB7CF851
-:1034E000FC5FEB4AB17CB5CE8FE56B75E3B00CD7D2
-:1034F000556079A06E0A9607EB02F8DE9B75B3B0B3
-:103500003C545783CFDFAEABC5F29D3A159FBF5BEE
-:10351000D78C65475D10CBF7EBDAB03C5C17C27E09
-:103520001FD5EDC4F2485D3B3EFF53DDCB587E52C4
-:1035300017C6F24E924C481F42EEB8E382751A5DF0
-:103540006FFE538BDE1F9F46C8DA11A20FC095FF96
-:10355000D4096FA030BAEEB5DF9AA6B4C781CB4FBD
-:103560008880E3AC75116C5FBBFF8F44292264CD6A
-:10357000884EAF4AEBE3F977866C3F6C9D5618EDA9
-:10358000173BCEE7C4C4C631D376DA6FF006D65FF8
-:103590006B1F0FDF19116DDFD1F6BE75BA53DFCE89
-:1035A000DE7F66E3FB56C0DFEA8844C28877951069
-:1035B0005ADA95AEB63E14CFB6231662C9A1F857B3
-:1035C000DA49271D67CDA85F84C5125837EDA6C01C
-:1035D0003A3F20028583EA22480F0A8C716DF43B42
-:1035E000D71211E791FFD461F69DDB2F60F9DA3F26
-:1035F0006442E87B6BEE10420E3AFE9AD1E7BD7E44
-:10360000A037F55913D01B92AB02FFE9F456D0B1A5
-:10361000D78EFEC8AB5238ADFEF68329D381FE8625
-:10362000131F7C6FF5FE578802ED455D08BF06BE8F
-:10363000EED553A70DF01426A64B4A49442CA5CB32
-:1036400075127F280E7CFF058040E163F284704D87
-:1036500076DA2F1E1EFE85C8D86FB5ABE243808B8D
-:103660007A87D9B79DCEFB065F989C7446E70DF527
-:10367000CF68DDF97598985C30EF2FBD26BA7E478C
-:10368000A97C8D8DCEC6D9D57504DE775E5FE587C2
-:10369000B5AF19DEE9ADA2FDAD051DB85EE223BEF2
-:1036A00041745C7B814AA617021C4C88D7D8F94C20
-:1036B0000778F7013CFDDD0B38D1E8F0C3DB3FB004
-:1036C00056EAFA3FA3D187C0E88BB484AD935CD1AE
-:1036D000F6A7B4761BA31F6235B66F88A1639299D3
-:1036E000A0DD4C018DF81243DB0584BB757251CF10
-:1036F00079B784DF423E70FAC2D6409C75513EB124
-:1037000082DC492A117D00AF35A329BF1446D77941
-:1037100039BE6BE670595D32D905E35F4E6E15B563
-:103720008B245CC06526FDFFD52FDBE9CCA3F5E13A
-:10373000E11443FD9A43FD0CFD4774E41ADAAF3DF2
-:1037400032D4D03EAAB3D850FFC117D719FA8FEEA2
-:103750002A37D47F14B9D9D0BF8CDC66A8DF60BD0E
-:10376000DBD07FAC67BAA1FD26EF1C43FB78E541B7
-:1037700043FD9682870DFD6FF53518DA7F5CBACA76
-:10378000D03EC9FFA8A17EDBB8270DFDEFA8D86AFF
-:1037900068BF73CA7386F6A981170CF579F6C05114
-:1037A000C0CFDDB37E6378EF5F6A5E37D43F2464B9
-:1037B0005C3CFC1281C9194A419E9357F1FE54C4E6
-:1037C0007980E6808EFB303A2DD89C404EF2F66729
-:1037D000B7BD6F9D6990936646C719AC7D67E8FDDC
-:1037E000F8EF67713E211DD6C92E7D3B9BD755FF53
-:1037F000A0F215DA25F53BC95797C787FD35B94AB9
-:10380000E99B90EB287CD5FEAA8ADFA3E351796976
-:10381000624B26B584C929421EC4E79ADE27992443
-:103820006CA2E336B83237AF0498D0B1A534A817EC
-:103830006E81BAA8F849671CB89A3CB2014FB1F042
-:1038400025CE144ACCBDC95915E1A78E2505127C99
-:103850005FB0FB96D2F54A24D04FA0CF2F8A012F1C
-:103860004C7EB149FD7D2027DA7FE968FA4FE87F79
-:103870004C08D5637F05E1D85044FCA037D40C39FF
-:10388000B43D07E1690179A2BD471F289D6CBEEADE
-:10389000A581863A9BEF65EBDFE41BEBDAB83F3797
-:1038A000C293C219EAF7F14A8F75FBE428DD9AA0AA
-:1038B0001FAB2BA2402EA11C34B66BDFB968730F6F
-:1038C0002349148F56562EB6BBB74079D1961D2288
-:1038D0006E420AC54039C04D2D67F0518F3A420DF6
-:1038E000385ECDB5154500DFF8F60221F58C3F3E78
-:1038F000192FEAD791086F0D60B7E5EBE820D38761
-:10390000729CAE1AF55B6CFF3B05998DEFA4A8A2E3
-:10391000E35B08A3B12453E04E6104ACB68248389F
-:103920004F1FA9407C8D2360975A3578066762DD6A
-:10393000C9EDCCFDAE91470214CFABFDB20FC6AAC4
-:1039400014148E079F17F480A554242B696DB5F2CB
-:10395000BE15F8A33947CE00B96E916A8887D62D77
-:1039600079940FE2E89105DD72E211722576712CEF
-:103970009E0AE8EB6C1E04E1A8CD3F98D561CD0509
-:10398000BA1C4DED623AD5B5D7F7AE5F9671F8AE79
-:1039900002BB98966B94C94904F9964C05FA6ECE11
-:1039A0004917914F399CBAE192F39115F874057F4C
-:1039B0007FB5EF7DB4D357687A3C068ECDC38F2395
-:1039C0007CA6094C1FAF2AB24F09C581CB34C18DEB
-:1039D000EDCDC05369685F31FE8AA117DAE2ADA46C
-:1039E000ED56C553BC928E3FA6489A0A74E12A252B
-:1039F0008A05F9D7EFCCA0DFB7F3DE92221AE4876D
-:103A00002B8DD1ADF51321A4D0FE4E2FFB9EC549C1
-:103A1000427E7C7FA1012FF6D2C004328CDA49FFAE
-:103A200030E17B748ECC8E383C1EF9D1EC61EB24F6
-:103A3000050C4F1EFABF4BB9743C4536E88DA565A1
-:103A4000B22F4CBFB3D8ED447A32EBF14ABFEBF85A
-:103A5000F6850A187F79E603F6A574FC8B654DCBD5
-:103A6000812D4D9F8CFF12F8CE14DB3F6BF21F06A9
-:103A7000C6E103AD7474BA49381506B8A7573A7051
-:103A80007FB2F9ED83BA79BE2AB8D250BE5E4BAE92
-:103A900045B97099F72FD685DE3E3808E1215E09D9
-:103AA0003D2F8BE1EBA61C4D6FA9DE493ABBEC82A2
-:103AB000C0F41A51CB10CE12E7E7A6D1A40BECD676
-:103AC0003539B2524FBB48A572184807FEBAE8F71D
-:103AD000C1362320AF95A60EF6FCA706B9B9A2EF12
-:103AE000445FB817B8497931FAE632EBAF05F8E927
-:103AF000FA9F00F839A2F0B3908AA430D04B709CA2
-:103B0000611FBBBCEC21254CFFB9BCDF2FFCC78873
-:103B10000E8E3FA27CA8E30F4B6688E8BFAFC9C5F5
-:103B2000DB447F17C86193EC4339457265DC8FC471
-:103B3000CEAF4064F2260A67AB4474FC4126841081
-:103B4000EEF4AFC29ACEE147FF6CDE37FF01F0A37F
-:103B50003A3AEC1886CF1BA5623A9F34A23AAEA639
-:103B6000EF4B44827A9698837C4BDBC7C829C0BF51
-:103B700037FA400E36F17D1FF16CF6EAEDF22C912A
-:103B8000E135DA1EF2DE616867F64E9366D77BB6E2
-:103B90001AE8A2FBFD641277FFD14764767696E8B7
-:103BA000E1F4B315F76F2BD22644000DB68C1B7DC4
-:103BB00095C0AF1E8270D0F484A617A8BEC812FBB1
-:103BC00044C793F32A8880ED46FD9B505EC7E85DAD
-:103BD0005B81510E10BD3D930BFFCDF420BD90587D
-:103BE0007DCFCB8A9BAF88AF7AE84B127FBF384935
-:103BF000647298A869B87E8DAF08B727CC1A5D109B
-:103C000046AF6EFE5D19E63310F01CC2C11D745B39
-:103C1000057517A9C1FA85D2E230C0C922753613DD
-:103C2000AE1FD59C38FB28EE8749B48EB5A3E3EBD5
-:103C30008732D18DF834396B4800E9F81EB403059A
-:103C400035402EA13D18E47AD5E7053C2EAFAB25D3
-:103C50009FD1C5D80F8CC7FDB994E9F7C3FEDE0428
-:103C6000449041FFEF2C61A5E453F4F4D98D47B2A1
-:103C700014C73353B0C03ACD4EEB34D00366A767B8
-:103C800012960543670A5026DD582B225BC5A727ED
-:103C90006D3C4A57B344182F2D80FC2C792AB02450
-:103CA000CE34B45F697FA522EE3C381DF07E09E971
-:103CB000AE9B6E343828328C174B4F361FDD308860
-:103CC00058ED80F9A6F3F9A6DFD3B41040EC24AA8E
-:103CD000753085517AE734D47B4EAE7F1A0B8A9BC0
-:103CE000CB693F772149BE9196B6BC2E9C3FEE6BC7
-:103CF000FBC178772F2D43FF07C17A637D4519DB20
-:103D00001FF863EC565191343ACBEDD5DE112E59A4
-:103D10007ABE9F68FDB1FA949007AECCBE9AC2F805
-:103D200051A5FF037EF4101D7FD271DCD71BF581F6
-:103D300033E63BBF025822BC17FEAF7C2F89D45B11
-:103D4000154A0A6645F484289E286A92611F65F325
-:103D5000D3FD1DB4A775FA45E5F27869847D6C2121
-:103D6000A3173DFDBFCEE56BDF7B171D5B46C7BDCF
-:103D7000E073FAA0573A15A7A9C53DD7B33246EE6E
-:103D8000AC2C588F74D140E92817F6070522EAA514
-:103D900066658B47EF57F95C93433DE88328D2482B
-:103DA000BE9FA4F03129A2DFE6FEFEF4116B3F5D59
-:103DB000297DD8A718F1F15DF175FE3BD2C7F7FD5B
-:103DC0009E86D744F28CE215EDF1CBF99F7AE2B5ED
-:103DD0001EE5AE4D89EFAFBCD88D4FB56769F0A732
-:103DE0001AFD02D6BB9BDAE2D92D5A69BD2776FFB0
-:103DF000CFC6B5D59A941360DF4A1EC33E6885B21C
-:103E00005E057BFE02D8E5601F06CBD03F4CF298E2
-:103E1000BF160610815F147F88ED6F4244AF07E53F
-:103E20004CA3DFCD946637EAEF29AAA09FBFAD5619
-:103E3000C67958E17B69E8CF0DC1774D1E12B6B93E
-:103E4000A3F40A9F62FE8087AF880E347A05339808
-:103E5000D1ABF1BDE599C5241EFE7A7CEF76E37CFB
-:103E600013CAA5D8F79C92725267A7247E4F2227C7
-:103E700075F64EB916F7E178A276DECB42129507B9
-:103E8000DE9F9000856F133465807C22A8CF9ABC9A
-:103E9000C52817C84E2166DFAE30FA5152B0BF6850
-:103EA000657A53AB279E0FFB6E348EA4E0BE36516D
-:103EB000FF86BAD2C724AA8C1CB5AFB74A148F8D1F
-:103EC0004BFD532A707F7BA8551A14ED37CFA4ED14
-:103ED000DBA9FA1C19A56789D07E0837915CBA0660
-:103EE0001E7A883212A0C9E99B74603B7DCAF148F2
-:103EF00084EEFD0C1DB20DD689FE8923D80F06BABB
-:103F000084FEA64E56A72F427D95D9EFC779494129
-:103F1000EB03145EAB6CBCAEF07A32AF7B783D87BE
-:103F2000D7C97AAC3B645A07FE35073D58B7F37AD8
-:103F30000EAFA7F07A32AFE7F2BAB01EEBAB643641
-:103F4000DE4A29C4C6B7F3BAC2EB29BCEEE1F55C80
-:103F50005E275BD8F72DAC6E3787D8F80E5ECFE1C1
-:103F6000F5545E4FE6F581BC2E6CC17A42799947D3
-:103F7000E16F900F1DD13A2A110ED7EE7A674C3BB4
-:103F8000A3975481703B2C940176D3FED9BFC8000F
-:103F90007FE88663D77A613FD670AB464F3E949FE9
-:103FA00024F3169463197CAC86195BD00FD1304B87
-:103FB000C6FD27E1FE99687BF12185B65F08883E42
-:103FC000A09B2792E3FBC97E51C7E295ADDC4E5E14
-:103FD000C7E3956B215E09FE161EAF5C05F14A0B27
-:103FE000D0A90FEBCB215E990FFB6B16AF6C8078DD
-:103FF00025AD3F07F14A5A3E0BF14A5A3EC3E395BD
-:10400000DB79BC722BC42B69B919E295B47C9AC7D1
-:104010002B9FE2F1CA2779BCB26D46F15B7930FF84
-:10402000B96CFE89F0D1778A517EF6A930C62D523F
-:10403000C6A418DA3DD71BE316EE925C43DD59683F
-:104040008C5BD8F38A0DE35933AF33B4CB69E58683
-:10405000BAE434C62D0A774D36D4876EBBCB502FC9
-:10406000D85869187F70EBFD86F6BC96070CEDB941
-:104070008D3F37D49525F586FE4F9A7291BEB217C3
-:10408000AD34F4CB9CBBDED06F9EDD7FDA04F26EE4
-:1040900042DA15C937F2B59AAE9797B1FAC1944D85
-:1040A000FC7ED4734C1FA18F16FC6A59CC7F65FD32
-:1040B000E4A643B07FB1E4313D15EBAF8A1D4F76E6
-:1040C000EE38A2D2EF94B90F793B75FC48BCBAF731
-:1040D000E85293242627573EC2F6E72D8FC4DFA768
-:1040E000A326A0EB68F9363E1FB82493418F68FBE6
-:1040F0009A964704ECFF7DC7D7DA63C78D7E8FD2CF
-:10410000DE48FD7E38C4E7437584CE5E3077264FA7
-:1041100027A8E7D97ED9C4FD3B65134B8F35527E66
-:1041200059E6213E0BAD2F7396FB995D42AD73C0EE
-:10413000C5925B715FAFF5D7E6D5E89CCCE40BD1B7
-:10414000F92D514ED90D7E856569BDDB6F72C48432
-:10415000FE3F53442061AA9764A9625C0E9D8F7C48
-:10416000D8E45B4A503FC5F50F10B29EC59DBD46D1
-:10417000BF69E38C18F9C7F332CC7CFE0D69E5F812
-:10418000BCD1D3FBBC2C302F980F9F9739E2C0D203
-:1041900014B1E17C474552B15E1A49C6F2DA487F54
-:1041A0002C474632B01C11198865492407CB6B2275
-:1041B00057E17BC59121580E8F5C83CF7D91E158EB
-:1041C0005E1DF9013E1F1619856551E4067C5E18D7
-:1041D00029C3F2AAC82DF87C68643C964322B7E153
-:1041E000F382C8242CF323776339383215CB4191FD
-:1041F000E958E645A66139303207DFCB8DCCC632AF
-:1042000027F2203E57220BB11C107918CBECC8CFF7
-:10421000B0CC8A34609919598A65FFC82A7CAF5F8F
-:10422000640596199147F1B937B20ECBF4C8062C44
-:1042300093235BB1DD13D98C6552E4397CEE8E3C5F
-:104240008BA52BF2023E7746F660E988FC069FDBE1
-:1042500023AF60698BBC8ECFAD91FD585E0E4F973A
-:10426000B3834B4F18E3CF233F31CAF192C3C6F853
-:1042700073F13B4639EE3B688C3F0F7BD5187F2EA0
-:10428000DC6B8C3F0FDD6594E305DB8C727CF0C644
-:10429000BB0CFDF35A2B0DEDB92DF71BE574A351A3
-:1042A0008E672FF9B9A17FE6A27A437BBFB92B0DA8
-:1042B000EDDE1946F99D4E9E30ECD33C63B618F501
-:1042C000DAF5BF34EEDB4A9E8FD9D78450BED80BC7
-:1042D000FFD5F09E35EF408C5C56997C8AF1B70390
-:1042E0004820BEB998D87DB0AF89C5670A9707A99D
-:1042F000C077B44CE37CD707F88E9629B7CCF5028B
-:104300003DA44E2C9D0676CCC5638202BE3261620E
-:104310006D3EC47B52FA138CFB1275C80D7E5A6F2A
-:10432000CAE075FA44807A1661FE06B2B41CFC6CD1
-:104330004D39ACFE56E39272C88B6932F376B5B153
-:104340001CDFB7B1FA91C619F5D09E92E4EBE7A352
-:10435000EF6D35C797D79F4A2CBED75FF2FF41A2BA
-:10436000EBFF6B59E743E097FB776BE003893E9FD8
-:104370006B0D0C80D0DA5973E019501DB982FF30F3
-:10438000F42B12FC1F4A28B78D7ED609A038E9F31A
-:104390001CC9FF4768D7D6DFE4EA7D1EEF72BDD4A3
-:1043A000944C709FA93E26F3BC1282FA52F36B3DE7
-:1043B000EE70A3BC5FFE98BC05E252E6CCF4E9E0E7
-:1043C0004F833F83FE686D5A087E762BE8A18120DB
-:1043D000E5DBB174920E2CDDA40B4B0F64120C8C38
-:1043E000AEBB7BBD596CBD140E5F4BB88FA8C1FE30
-:1043F000F58E89A5B01E0A870B1C0E7F97FA2486BE
-:1044000003FDABF08E642E51B4277609067F6692C9
-:104410002940CC3C8E0ACE998C193EDC8FFD49F2A6
-:10442000203D6AF0A37F8B524646F301E87B56732A
-:104430009F9EE369E320C0E0FB5C1F6AF45C9B4045
-:104440003F697E6EA2DEFA9DE24DBF97C5B8DF31AF
-:10445000493E8CD7C6BE27398DF2CFEC0C601E8446
-:104460002CC58FEBCA161EAFDA38F18AE2DB3BB8F7
-:104470009D4F1A6FBDA2FE5BB475534A80FE591A58
-:10448000D76FBC15E96E107F3F0BEC3A4A4FAFFF78
-:10449000B9BABE05E80F62D2F1FC07AD22DA835942
-:1044A0000BA9E0C989C23BB390DA83C3A2DFCD5C1C
-:1044B00064F4BF8465165F21AD57067F2DAF338B43
-:1044C00012FCBFA6F49C07D93691AD87C751A50D44
-:1044D00015CD362A7F0639593DB3B5F7F9101EB709
-:1044E000C8E47495E9E47E979DC6717B7CD7F4CED1
-:1044F000F078795E09BFF31DE38033CDF1E3A814B2
-:104500005F88EF81DA3C6AE91F9DD7603E7F6D3C92
-:104510002D1EA8D5293EAD607737B554A29DD5E4B0
-:1045200065FA9B7C43471F892C4FE2EDCB421CFE72
-:104530009BF87E32A49663FE23D965A45365A964D3
-:104540000FA0FD26A640B9B991F5CB59966607385C
-:10455000357A5252A0DC542BD6DB28DD34AAC40FA6
-:10456000CBCAFED9091B6B3F9E0C654E5BD75BF92E
-:10457000147F391ED127D1F964A8E7DFBA09CA161A
-:10458000BF3507FC704B24CC23CC6E23F602DA2F08
-:104590007B2EC17E0444209DCF931A1ED556611CEC
-:1045A000FD67664BD7521BBE47FC8374FD3670F027
-:1045B000E5353E50066C9AD7E2993C0EE2F385C48D
-:1045C000378844FB3DCEC773403B8C3386E5316A68
-:1045D000EDEB78BBA5F6BC9A0F654BE7BA9BA05FE5
-:1045E000AB719CB5BCDF20ADBDC4D8BE5A23AB2592
-:1045F000CF87611C534BD77B37C17CDA58BF6EB96C
-:10460000C5FBAFE2FD63E5C560788FFB2BF5F35C7E
-:1046100011835F4D7E84C03F900FF865FE018B755E
-:10462000EB53E08FD4FA2D17D8FE4889C9337DC5E6
-:10463000CCE46197CCFCB61A3D25A26F3257B71F68
-:1046400080B8E50CBBB17E4F8A611F48C6F433B613
-:104650005F9F6B6C2F196AAC17161BEB79D719EAA1
-:1046600017BBFD2F411BE68573FFCB60FE8D0D6DE3
-:1046700095988712F5FBF9EDFA7D4A26EFB7ADA6BE
-:1046800018F9A7C1C9F987FB691CBCBDA9B0D2AE96
-:104690008FBF6BFCD30C7E100BF85958DEF68EB62C
-:1046A000DEE1B589E37B23CFAF7982E3A98DE3E92E
-:1046B00017DC8F13E47E9C353CEFBC85E79DAFE4AF
-:1046C0007E9C469E77FE02F7E3ECE17E9C6DDC8FDC
-:1046D000F36BEEC7D9CDF3CE9FE37E9C15C3BBA68B
-:1046E00082FFEC59EECF7986FB73C670F9BD62ACE0
-:1046F000AF1FF8F7B68E8DBF7F1EC3E9E2C7E0C8D3
-:10470000EC037ADB536F06BAF4B13CEB9C5A8F682A
-:1047100029013B97D165CE2C8F2897809DCBEA93BA
-:10472000B8BE05BD827933993C6F26936A9D74EEBD
-:10473000FF85AEAA4AC01FDF778A6738B842DD32EC
-:10474000D7A30AF1EAE3067DD58000712DC9E44FB5
-:104750009247C0F86C5EF9C1AE0390A7E8EBE82879
-:1047600007740E3BD45E0FFD0A0B83109120E6B454
-:104770009008726945990FFD6F4F7F68F26D813126
-:10478000D388812EE81C519FE5F1FD2CB9DE481736
-:1047900096C826B49B9B6A587E06ED1377FFAE95AC
-:1047A000C97EA3FD90546AF483350527F7EA97F68E
-:1047B000BD6A7C7FD85EE3FEABA9D09827125B165A
-:1047C000EE1263FC5C31EF3B7BFF7E7E6422AE37F2
-:1047D000119DDF66AA2C97757912CEC80F711F1133
-:1047E0006B0F4A60E70DC4BC1A3FD8BF529EC70F7B
-:1047F000FE12294FE1A58F3FF7F37A05D6A9DDF820
-:1048000063189FE2C560379A480063222B8610BE6A
-:104810001FF967BD9F2AFF157710DC4F789AEC3798
-:10482000A84083FE99881F99E32755AE7906FC1F9F
-:104830004FAF1609E07F6B4BEFFCDB239FC2E9C74C
-:104840003852D6224F31E8BD44EFB52E12C7C58B82
-:104850008FCDE774BD6CD1640FEA8D8397CD179827
-:104860000FEBD7F205FADCCEF305CE8C37F8955373
-:10487000AB7AC7E3062EBFB47A06896FBFEEE1FCC0
-:104880004E9C2CDF44A3FBD461BD8FDF7D6E2724BB
-:10489000920EE00B2980F2B3CFED01CC8B27145F91
-:1048A0007A3E69FA76FADBC087EA3A96A748FB892E
-:1048B0007A3B4C9B4786275C2640FFFDA3307F63F5
-:1048C000B0332042DCBA693FE1DF69477BDC31A3CA
-:1048D000C6CFFC65ED04FCF68E1A9F0ADF077C61EB
-:1048E0001E5246777FD40FAB8222A67E349430BB13
-:1048F0005793FF1A9D34788B0F417CFD4289847158
-:104900006F6A5F5DBAA4ED67E87F06B7313A68EA7F
-:1049100043F0DC8D54A086811E897F1CC20DC81F08
-:10492000FE9A5C3FF1E3B99422A6FF4D70DE03FAD4
-:10493000491D7ECC830E787C90BF98D5360CF94CFF
-:10494000F2D40880DF87C4C06E3D5F999C2CFFAB1A
-:1049500029C1B982162E67FB25C0EB87BC3D55EEF9
-:10496000180F72F8E9C728FDC7C9CBF903D70B4F59
-:10497000B54EFE438112E55FADFD4F60A4E9E695BB
-:104980001591597E61DB77DB078C35139E7F647C44
-:10499000CF2C5518F6615966E3F7E434A33FF2CA09
-:1049A000E729A15C2285371BF09CDAAF77F9A9F1E2
-:1049B000FFC5AC18BB23AF00E9396A7794233D6C7F
-:1049C000F412462F9C9E343DE2EAF4ABE2C09EF422
-:1049D000B13178C00676B246671667C80F7E038786
-:1049E000378CE9823A7AF82BD04356DB4884B7AB50
-:1049F00044C5E7FBB8FECBADED2AF3C7598766DFA8
-:104A0000C1BECB5B0C5F88D9FF908A20D8D559599D
-:104A100010C303B5CCFC0B999997DB6F5D59FC5A19
-:104A20008B2767D33FD8FFBCA2E1FD8B18BF9587CA
-:104A3000AA785D3CB5EF17D30531A7271E62DF6B5F
-:104A4000F4947BE2C96FC91448B7E8F01FBB8F8F9D
-:104A5000DD6F13BE7F94BBAB8B500E5B268CC3F80F
-:104A600048F7BE7BE3445CB785E34F6ED1E2FBB110
-:104A7000FBCAB9BEDEFDAADF6F5FE9B318F34BAF27
-:104A8000383FF73BFA25B672BB35767F113B8ED89F
-:104A90001610E39DDBC86F33C23DAFC568FF0CE362
-:104AA000FC9DA31AFDC8036AFBC5F777F27CB5CA63
-:104AB000520D4FCA9DFF41E977F62133E6E16BFBCA
-:104AC00060CDEF349BE7AD55F23CB619A4C20D8D15
-:104AD000678988E777CE92F7DDD7E8F8A6CAC2CE15
-:104AE000D19166F371387FA1E567CD0CB2BA369FDC
-:104AF000EA3663BD8A4C4E07BF6B55AB99403ED634
-:104B00006C221DEFD4E64FE9F8271696875A4D6AB6
-:104B10009A40BE2DE379AF951E22A5A61032EFA5CF
-:104B2000A746C2799E7916267F4F53F82B3A7D7D92
-:104B3000BF3324037F7FB6F79A9FFC80C0FBA1A6FA
-:104B40007EA03F93E39F8398DE6C9CDFE5E61F3BEE
-:104B50005FED9C46A279483B85B8F93F0F6BFEAFED
-:104B60002B3C47B215826223129F23B9DCFB3B2DFD
-:104B70008C7EFEBBEFEFFE9EEF3F7F99F9CFB376C1
-:104B8000DD8879DE6935152057B57C96F924E00774
-:104B900057BAE9D5496A7F45D7CF7B85FD32693F52
-:104BA000D315F4CBEB7DBC739CCF7FBF6BAB0CFC00
-:104BB0007BF697C726823F70CE6F4CC44AE9E0DC93
-:104BC0002E173F2F169241EFDDBFD7E40F613D3C1A
-:104BD000F2365DBE206616D2F1E7FCDA85FEC4FB34
-:104BE0009FB78426D0F7EF7FF1B36184C2E15C7D8B
-:104BF000D79BFDC10EFAA5C0F2AFD4CE61B7D1E705
-:104C0000F74BE4BE8A387AAB83F3C199571C5380C3
-:104C1000CE849DFBEFC571DBEF345B74718DDF5B80
-:104C2000CC087FDA8F9DC77A56080D12D8FCF4F9AC
-:104C3000E25ADEDB99670536BF97CD211BCC6FE7C3
-:104C4000663940FB2DD8F937A4EB1B7EBDDB0D7018
-:104C500058F0B2C9207F16EC34852DC3B03C6641B4
-:104C6000FFBDDF298C047812D457F3F7CE9B00F4F4
-:104C700030BF7DD5DF4C6E78DFC85F142E78EE63D1
-:104C8000CEC726DF04A8BFF08C1BECD9D31DDBDD1B
-:104C900000573AEE3499D2D50FBFD6F12161E347E0
-:104CA000527A8E071E1BA0AF05ED2BD8F7F6DE7AE1
-:104CB0000AE4DB82183E3E0DFFC8E8A93F2216A396
-:104CC0005FF202796724D81D64676ADCFCE26EFD3E
-:104CD000C1F97ACEEE0B9BE03CF199E7FFB209EC0B
-:104CE000FBB9FFFC6AD3C3E01778CDE60179B4E0E5
-:104CF000971FBA890EFEA95666CF9F7BF6991D4F66
-:104D0000503E39F7470BDA3BE77E7B2A5BA1EB3F4E
-:104D1000B7E71FE970EE76D16FC7F605782CDA7722
-:104D200043DFDEF61B40B7218B1EBF21C4AFF2323A
-:104D3000FD4E5F020758581983A7D7F7BE9E0DF3A3
-:104D40003C7BC482E76F16D067B5C580B779A81FD2
-:104D5000A0BE84C27BFEAEE57F330D8B0777B5BF67
-:104D600008678548B83FF102DE6FFBF1E81228CDF5
-:104D70003E05C6235D28DF63DF5B7098E2F7EAC477
-:104D8000F8BC40BE9101FE0B76AD60DF6DA7F874F4
-:104D9000F7C4E759F8C7A89EF82CB6C6E273EED35D
-:104DA0004F40E3DED4B879241A3EE7EDBBA357BBEE
-:104DB00041930F9783F32C9E37F54F8BBFDC0A7C12
-:104DC000F6BC43F5323C8726D0B673BB2F64134A3A
-:104DD000275F98BBEE0539D9F55B8B670B7D7EFFAE
-:104DE0006F3F46BE3BB7EF3D5961E74F9C02B52B85
-:104DF000CE91EEBF0EB033E6F3D8DA826DAEB0C519
-:104E00001DC5D7FCD0A4718A1B9F1FC3E721C60F05
-:104E1000F343FB6F17E2E06F893597E9A7501F84D2
-:104E2000CB3CD221C3F97C3D5E8552C0E7B11B81EA
-:104E3000FE12E1535BBF07D67FAD0EAFDB181FC775
-:104E4000F69F4FF915E4700FFC86848FA13CB7D90B
-:104E500022417EE4391E6F8CC57B14FEFCFCE47796
-:104E6000B4171FB226884370385C8EDF2FB7BEEFB1
-:104E70000ABF195605C78D85E3996FE2EB83F55C90
-:104E80007ECC2735E3FAE9F499C54CF5590ED87B69
-:104E9000156A7F213ADFA67613CAF9333B4D21D03C
-:104EA00017B1F2627E827D72C8CAEC97F92FEF1FAC
-:104EB0000672EDCC8157385D32BA9FBFEB98AC7269
-:104EC000FD10D2EB870471CA5FF2F116BC1A7FBCE9
-:104ED00005BBFE1677BCD392FF4E98FFE90E335107
-:104EE000E910A7DB4D71FD49AD56B331CFD635F290
-:104EF00048127DCFE4B62BB0EE867AFFC72AD825BC
-:104F0000EF9BD1CF4224DF17163C6F6D575652B836
-:104F100035B8ABD0AFA28DD7180327C95BA10A253E
-:104F200070FEABA284D9D46CDE5ABBD9231AE64DED
-:104F3000F56E26E8A5A3C34F99619D9FC6D88F9FA4
-:104F40004AA4A92F1DEF5355F02D55E2ED178DE31F
-:104F500007969888A2D78796AEA3301FF23B1B0115
-:104F60003FB2E9359B0AF264C1265B08E29BAFEFD2
-:104F7000BBB803E076EE690B8F77B23CDB6ABE5FAD
-:104F80003BB5EFE2A6FFA2EDA7E065FAFDEA4DB45E
-:104F90003FD8EDBB1C98F4FCD7E79386112AA7AB4A
-:104FA0007FF7F044902FD5B0C7A2FDAB7FDD37D49B
-:104FB00040C73BD987D54FEECE0A015EE6BEF0DB97
-:104FC000F9A04FE6FCCA4180245FDFF7F1BD503FF6
-:104FD000F73B17E67B9DFBDDA91F021F507B5BD1D2
-:104FE000EBF5D9FAF3DE74DC395067EDC2255D1EAE
-:104FF000C11C2829BDCF7939C90FFB715D3F7C6F7A
-:1050000081A5EB21744011B59F887BA2703FE0C35E
-:10501000393B8DDFFBAB95D9530BE4AE2AD63FD895
-:105020008FF16B07BEF78D46A7BC3DF67DADFF7FC8
-:105030005A7363C661EFCFB7909A78F46FB1B171CC
-:10504000E7ECFC36DF381EA3D79EDF61CF7F2AB0A6
-:10505000FC7CB2C786E77FE7CAE1C129945F5F9411
-:10506000C92CE0DBB9EEF0E064FABDDF707939D726
-:105070004EEBF4793F3E0FE80F7562EDFC15E077DB
-:10508000DE4B3602F43EEF772EF42BCF7BF1E2C9F4
-:1050900027E9F333FB1C98C73AEF778B11DFF32C2A
-:1050A000E17BC18FD3B5C782FEB1337BDECA067BFD
-:1050B000E48C399C9DD28B9F685EBB853B2F8CEB2B
-:1050C000A0FB82821A27F839595E4E2D61F70ED463
-:1050D00042E207D0F12736160FE1F1A907B8BFE881
-:1050E000FC0C2509E77FFD2DEC398F5F3F70ABD2BB
-:1050F0003759370FC89B23D7D07D895C930F72D661
-:1051000014B98528B42E450662A9F533C1FD0DE01A
-:105110000F4D2368BF9BD37CA49A968B534800CF36
-:10512000FF386FEEE6B33F50143FB041E90BE3F9AF
-:105130006C4CBECCB3FB47DB306FC478EF82BA8FC8
-:10514000ADEB22BF4F2176BE17CDAA05E479346EB0
-:10515000C7F2066B25E563F0FF92435C2EF5583FDE
-:10516000E3B3F39E14E4336D1DABEA3C284F56D4F1
-:1051700079B15C5E574014CC77F661DDC4E16129FA
-:105180005409F8578107E1CFE2ACF0C37D16302611
-:10519000C4534DCE00D297C55B83BE022B8F8B9A32
-:1051A0009C2AA976429E078393C959817092795DA2
-:1051B0006A9B8070A5EFE3F3B1F6C00CDB08C83F33
-:1051C0001E6A9053725AB1A1DE036E1A5DECFEDFC7
-:1051D000861F4178ADA8B36209F9E20037C8178786
-:1051E000FAFF07F8B530F85D47141DFF40FEB662C0
-:1051F000E0A704F0DB40E19716E5AB5838D4F23C69
-:105200001D8D9F12F12FE4DB4310667D5D1B96DA46
-:10521000F394047AFDAC8DD923B524B014E3A11E18
-:10522000E68721692AC9D4F99F8857C5732078DE9B
-:1052300014DA336F41FFA5865F93473A69947FCABA
-:10524000C7B09EC56F9B459057A6DAADE4335D1C91
-:10525000DF34A1C2A6209C7D02C4351AB87E5DD67B
-:105260008D4F237FACAA53B05CCDF9642DE79375C5
-:1052700080775A6FF0B1FC9F967104F5E763B4CE66
-:10528000F6FB61A2F78B27FBDAC3668A7F94490A93
-:1052900096EC1E8E2396D020FA9EA390603C23F9B4
-:1052A000C8CF42B856D28EE7AD93B57B605ECD4D88
-:1052B0009E8A712062667A8A98581934C33E2A16EB
-:1052C000BE0DBE0378BF44A2F9941D9D2DC0F72EDC
-:1052D0004E65B1B3B47BDA8FC07D10CE16073BA705
-:1052E000E8AB19908DF2D582F4EAF405846A1D1EAC
-:1052F000D313D87F4BECE3FF03E8F113C84BA4F8BA
-:105300005DDF3610F35A5699DBBD200F57F1F31AC3
-:10531000CA140A05DDFD626F7039E92E31CA014DEC
-:105320002E7BAE2F36D0B3267753C618E95E93BBDB
-:10533000BFEE96BB156741EEA64636225FC6F24128
-:1053400083595685ABF13E1AE67F3A26B0FB327A96
-:10535000CA038CBF9FEFCCD902E7B135FE895DBF90
-:10536000D43C1EBFD36D0F26C87FECCFEF6568A677
-:10537000F446F2215F414144ACA174066590D21914
-:10538000E3A7522C353AAE274C86A87B45364FEE24
-:10539000AFD5CEE2D45B8BFD80C765ED8C87B2ECD8
-:1053A0008CCF96A589A0BB8844F7934EFA48DA3F84
-:1053B000CA0AF6A56466F1FC2E97D80EF1DC65CE1C
-:1053C000C956C82B15924B907EFEEEAA1CD05B7C72
-:1053D00007EE5F03FAF3387DE438EDB78CDFEB645A
-:1053E000F21413D897EE7676603E94D32E1AE249E3
-:1053F000F3EC815CBBAE5E045FE77887617727B82A
-:105400001F6A185F0FC954499E4E4E74DF97A4A8B7
-:10541000A440272FEA07DD88F731F5941309E4E16A
-:10542000F6FF1979D83020847835C7CA9F343FDE1B
-:1054300001454B15AE56A0D6F9B2BB87239DDE6061
-:10544000877D88734BB71DF4A3DC9EF38C957F5149
-:10545000BDA6A01F8CEAB5C74B419E26D46B35F77D
-:10546000211DB7F457808EF7AF79F869A87FB6C6CB
-:1054700082F7BE5445561085CEB73A320ACB596DE5
-:105480008F6259D9B6993211214B5757AF990AFDFE
-:105490003798D0FF733274CDB95A5A3FD96241FB65
-:1054A000FDE4C6070780FD77B2C5A198C0DEDF38EE
-:1054B000C2D8DECCEE7F39D9660E9918FD5E324136
-:1054C0003C8270F90E5E20DD7C49898276FCF99879
-:1054D000784BE55A8B5F7027867F655B7C7B12CFAC
-:1054E0006F63726E4D3EC8D7B2A33F1B00F4A1C9D3
-:1054F00099C52954EE01FC8E5A48BCB8C058FBD857
-:105500000580A7B176FF6286AF2BBB37EB3391DA0C
-:10551000DD88A7807B92C1EFCBFCAA9F71BB9C5812
-:1055200013B4BBF9FB9EF8EDF35AFEF2E62304F246
-:10553000548D7E6D13F8AB05D88F4F62790F5A1CCE
-:10554000A8275D337BBAC582726506F74769741E6A
-:10555000A5B3809B9FDB33D0E1ECC83A947BC2AA11
-:10556000A2C74751F87D45E90FE8435835BA2FC027
-:1055700077E9CA1FACBD878EFFF53B267C3E2B62C8
-:10558000C3FE5F3EE27BFC1ED82FFCBB19F349BE75
-:105590003E3416E3C95F9A8D7E8C32079397AF71C4
-:1055A000FEAF8AAC32D8E755CDD365F0835645D6E9
-:1055B000E0F32A0822619EFC5D6F9449105F2298F7
-:1055C000E7F29AFDCEB1F5A84F8BD18F56BDDA1216
-:1055D00037CFFF35BB629057D59D2D382EA1F65998
-:1055E0005A3A1F4F2777AA23A9C81FC4A312C8FF7E
-:1055F000AEE2F2A77B7E1BCD06F9F3A52DBE9FE69A
-:105600005D3B5B6755E407C8773DD7F7437C5EA5F4
-:105610007DB793F169743D8F8F8AB79EE83AAEC724
-:10562000FE5F26C7FFFE050EDF9375B3889FCAAFE6
-:105630004A0BEDE784EF3FD8540AFBFC8DC9298261
-:105640006E5DD56D73885FB7AEEA8DD364FDFD9452
-:10565000513C2C32E0E1C2CA05888725F68A63A056
-:10566000072A578D1E16C07DFE0A84F367665F36D3
-:10567000C8E3536D0FBAE3E5175F88C54F1BC70F2B
-:10568000B5BB4B74F8D1F012FBFEC93F57FFFD11BB
-:1056900090531B5C06B9125BF6C05B4E7CB825715B
-:1056A000FA3C49F57700E1A6BC7804E87AB503F343
-:1056B000E412C3EF2A12E80D7E09EC676A67591DF0
-:1056C00023E0BB04E150DDC6E8E072708B7E97D327
-:1056D0004159FCF58C766874504B54CAB0C7E5CB81
-:1056E000D1C1C344B5F6B28E6E3A687BA32C2F4A63
-:1056F00007A31DC1B1F5B4DF1760FFE4F7C4FF7164
-:1057000059755F07F6CE4A13C6BD8EDBD5F4BB587C
-:105710007D38C8E7E3EEE0C4EB4AA2F5D9DB07B970
-:10572000F5F73A9E6AA6708803BFD18E04F493A75A
-:1057300092C291FFEFE8E73373FC3CD1B1F6B2328D
-:10574000C02709C6F7276BA526BF4D49CEEE7D2F92
-:10575000E8D1E3CEDCBF8768EB1A7BE056076D6FBC
-:105760004C7E08F5FCF1E302EAE1A57F5E9C0F7236
-:10577000B887FD5B1779E2C420F45B3E79C28CF6F2
-:10578000148E4BA8FD037A00CFD7E03EA03FFA5914
-:1057900012C5731F84CB7F4744E3BA5AFC76595D28
-:1057A000C7A3303EB1AAC4A39DD757A064F6D87F43
-:1057B000C23C74FE79D91CF0C0B92159201540F7BC
-:1057C0006629D00CF986666FDA705507E7850E9664
-:1057D00097633B78B03987BE6F9BF9070FF8F92CB8
-:1057E000F43B505A33A5F37A7FB939AD9DDD7794F8
-:1057F000A77B9E0BE7A269DDE077A0F3ED65DFFCF8
-:105800001BA1FB9E35BCDF78AA76D117808ED2CD46
-:105810001FB5FC15A991B5276BCD8DAC9DFB51171C
-:1058200054323FE9EBD392107EDABAA6BEBA1CEF2F
-:105830005B9BFA6A069E739AEACCFF1CE0F91BC8D0
-:10584000FB01BA4F66FA39962E1EE5F2E7EECDA2BD
-:105850006AA6E31D34771D70005FFC54C07DF55DC2
-:105860001F1E3403C9FFE9F07133DC97701FA4EAEF
-:10587000D0F54C238ACC8CE810BE3F9DB4BB58BDFC
-:10588000BD0FDC7F1A1D8F6E9961BC852CFE7CD705
-:105890008787C7821AA5E32D83F2BE77880CE34F72
-:1058A000DBAB34B163517CBC57E9786274BC6EF8F1
-:1058B00049568447143E568497061FB85E04DBA3FE
-:1058C000F0457B45836F03C08DC26F6AD2949BC93C
-:1058D000B0C4FC32D539F873765E8CCD2716BE5F26
-:1058E0004313E5B7A71CFE3DC07F8D0EFFF3C03FFD
-:1058F00073AD5DD9522E9E077B119ECF370506A44E
-:105900000FC47362F97D200FAD237E9C37964F8FB5
-:1059100002BF5C0D25E50B98073FB7722F5FE7EBE1
-:105920003F3BE5C2F328FB3ECE86729EA973F59DF0
-:10593000C06FFF6642FBF3FCDEFC5EF3EB8E72BFD2
-:10594000CBBB0E7E9E88AFF33E6ECFDDB7D7118204
-:105950007B10EFAB3575EFAF80AEEFAB65F9274449
-:10596000EA1876BBC19E6CE4F1909EE3C07E21767E
-:105970001C6D9D07B2FB5D05FBCBA747C8B88FD850
-:10598000FFCEF93F56D3BA3DCB8AFB84D5C99C7E66
-:10599000CBD8BEF5E964BFA308FC5F2B537C2A5D1E
-:1059A000E7CA3748BB48E17460C843A1F212B81790
-:1059B0005A44DFD9DAC8D66039BC57C8EE9DF170B9
-:1059C000BB746DC7F136A0C753472C1877F8D2C502
-:1059D000CE13AE345764831DFFF96639EEFD679F21
-:1059E000BA249CEF66A153003A9F4E825690177BD3
-:1059F0003B26F785F9B87DC403E47F6AA34964F7C1
-:105A0000A369FE96B0C4FCFDAAC4EA7E5E7A6CFA75
-:105A1000FBC6568C1B83791E335ADEC3BC5A7709EA
-:105A2000F3DBC5CE23C9C9E6EBEA48C17C52D718DF
-:105A300011F3B15DBE2E01DE1BD0512EE3FB41A15F
-:105A4000D7F7072CF18C07B8C2FB20E7075CE1FB16
-:105A50001627CBD35AC7F7D99BCDBEA631749CCDA0
-:105A6000AB9305C087D64F7132B9726A8CE6470A8C
-:105A7000A21F293BCF63837B2CB2FDC8DCC4551227
-:105A8000C4FBBEB7403FE66745386C1EF26218E2C1
-:105A9000D82BC1BF027836337A5AB95A40BF2A850B
-:105AA0005F3FD0139F3F66B905D631A059F0C0DEE5
-:105AB0009D9671E73DC5656574DEF238EE0BC14D0C
-:105AC0000BE3666FFC00E7E54AB0DE7A17BB27FF01
-:105AD000F3CBD0C7570E766F62766D07BF1F2F8C42
-:105AE000F7E005B57BBEFC25EC7E13C9AFE8F36398
-:105AF000A2FCB394D321F1439CADB2540E811F415B
-:105B00006CDE3C05D63D3D682137D1F5B5081D7EDC
-:105B1000E0177584C8EF53F21F0538AD59D717F356
-:105B2000F0968BFE6CD0C3EAFF91314E77C07F7E3A
-:105B300003DC1FBFA95446BE380070A7F5A797E441
-:105B40006E8638A5ABB6BC6D3A1D2FE49151B234C8
-:105B50009490B7F3214EB944F408B47FB042CBDF40
-:105B6000F6E0799EE1A6AFC617401C2F43449FD2B2
-:105B70002981DDDBB06C49B907F0BACC9326E8F790
-:105B80002F77723A389A5271A793C2C7FBC87A0F1F
-:105B900035E3287FA65E057E44B55956B6B3782115
-:105BA000DEF790CAF192DA2186ABDC5877CE4A81D3
-:105BB000FB7499BFF4D19B03CCCF09B1D191E8E735
-:105BC000E47F5EC46B1AAFAD1C6AC74A6B7D15F6E5
-:105BD0008771D2E938A9256278241D774BB27F13EB
-:105BE000FAEDC65A114E44EA6C033885C6F6C3BCBA
-:105BF000F0F5A306BF07E758520F754D063D1ACAC8
-:105C0000B2FF6933C8A965B2027C9EBAE4E43D786C
-:105C1000F99BEF170F4299DAF8D1C320A7933BFF06
-:105C20005687CFC7C906FF62EA275F7E0BEDA9152D
-:105C3000B2C14FF94D4AC5CF012E9B0A8341BC1713
-:105C400013309A1E5DC7EEA51DE3E0BEE3539344F7
-:105C5000DF16DE8EEB6AF5845632B895805ED0E0B2
-:105C6000B65C54DAC3B0AE8956A48F3CD281F22A16
-:105C700003A2D903A37849FD64C542C8D7889DCF44
-:105C80001AA7D07DFF06DC1308B882FC1839630C14
-:105C90009E43DC53DCE1057B7E7582FB73DE75B1D0
-:105CA000F72D22F3B3C6B6BFED62F40022B1AD18F2
-:105CB0004B7F11944EA226419969C5FBE6F688CA2E
-:105CC0007F209DAF3729801FE86FA6F8DBFFF669BC
-:105CD000F42FEE0F7E80E5B3AE02FC1E6D0FA7D34E
-:105CE000F7D794B0FB8ED778188D5437337951EDB0
-:105CF000EDB442DCA4BA9078B6707A53353883BFDD
-:105D00008CEBABCADB195CD30A09C67DC11704F75B
-:105D10004DA5433F0ABFB4E6A50B118FA4431D4810
-:105D2000FBAD8171013F8D2CAF9F904E2BF26FD058
-:105D300084714FCAEFEF825FABB2A52FC6FDE1F8C9
-:105D4000308C97C2BF9BC2C7DB4CC701FFE1A9667D
-:105D500013D982F2AD03EF675796505A46FAEC2AF0
-:105D600083F39A4A89C7B352A3034D8E51D6984103
-:105D7000F505C06D86AA2E04FA3B6EF5BC0DF370D6
-:105D8000B45A1458FF8CD6971683FDE2F07636830A
-:105D90007CA82E65F34D69A1CFD1CE51DE85FED50D
-:105DA0002D16857D8FC3AF84D31987C34C3EEF99E1
-:105DB0001BD9BCED59A120D067F5120A57680B30EA
-:105DC000BA0797E82511F9EA10ACDFA5A6E3B87D7C
-:105DD000A6C4F0450CFD69EBAAE4EBAA5CC2D6456B
-:105DE000383FD1698561DCCA12B6CE1984BD2FC295
-:105DF000733AFE4CBE9E4AF5452C67365B0CE36F4A
-:105E00002AD8D601F3C92994153C3742D87D87D9C1
-:105E10007C5DD98DEC7BD9852F22BC48AD6EBEE868
-:105E200057D5D5295F9D7A8B3216B573856C2B12A9
-:105E3000D3F19FC918CFC96B35AEEBD48AFCAD70D6
-:105E40001EFCB3C7648C7BEF117D4707E07E545680
-:105E500098FCF17D3001E4F4CC461FC8F1DD650CFF
-:105E6000FEA76E2521A08741872A5200DE830E05FA
-:105E7000785983F1740A10A15BEED1F9D12D53B397
-:105E800000F23232F0B95920074AD9399F2CFDBCB3
-:105E9000E9FC529BD3CB211F2AAD34A55CC6AB5D78
-:105EA00063DA0F3D315984F6834F3C08DFC920BACD
-:105EB000F5D076D93D909D6B39485BA15FEDC94720
-:105EC000001F2DFC1EF24130B3142C0F42994AF9E9
-:105ED0007B550ACC53226374F7586E7F6C249E0363
-:105EE000C794A7622CC324CE3D97BAFE43787F5552
-:105EF00088D3CFE5560CFBF3ED8FDD3804F6F16B5C
-:105F0000C04E4C8273BC9EAF204F47F58908F735D1
-:105F1000E6B0B590D69753BB11EC97B5051F89C075
-:105F2000776BF6121FD0476AC53F2D7A3CDEE462DC
-:105F3000BFCF23C96415F0FF812127C7019E42FB13
-:105F4000A9DD49FB97FFDEF98403ECA13FB23C9841
-:105F5000CD6FD5A0FE7E285B8E7B1F2FB98C9D1840
-:105F6000DB3F65D064F4E70D685D370EEEF7AC1EDD
-:105F700027F96EA2BDD35ACBCAC08E512A2875F517
-:105F8000A5F3DE387C2930A13281C5CB9471ECB900
-:105F9000328695ABEA0E3D0AFBF6E04EC99647E71E
-:105FA0003B7405BB576C55E1796B80DAA52565CF4D
-:105FB0005B6FA5CF4F94502D489F9FB8FEBC0DE25C
-:105FC0003B4F9794A7023CF7361BED3A02975DD101
-:105FD000FD509125E877D179B57C48109E264BB8C5
-:105FE000AD92D64D2F39C1C2E9B1CF59D1B2790A9C
-:105FF000D0E98C0219DDF6B1EBFD88EB93E9B55DD4
-:10600000E3E07EFD1C9530FF7EF07114CA33B9C801
-:10601000C8513B50E8B85AD9FE2428F9DF04B91C0E
-:106020002C0CC8F08A26CF5A0655EE0079F6676E1A
-:10603000D7919A5978BE0CF9DF04F6505759BC7DB8
-:106040005389D38EFD4F6DBCED63F053CFA865F639
-:10605000FE808D5F09880F6AF765D0F10794E055DF
-:106060008364C692A0B508F09327124581F9B41352
-:10607000D82704A9FED1C3411BF7BFFBFE429705F9
-:10608000F9B0046C67DD7A9C7C3DD93EBA9E387AC3
-:10609000BA987FF7A74F7DB57F14C07F09DB220D2B
-:1060A000081E13ACBA790C50AF6C1ED7C07860BF15
-:1060B000BAD8F9535749279E938A95EF60CE03DFEC
-:1060C0006E729C1BCEF6F74679DAA3CEE92AF679F2
-:1060D000768CBC2AB2B4DF8CF8DDCDEEBD868C5850
-:1060E000681788A8B07B3F43DAFDD435D06FA8CBC2
-:1060F000E9013A6819F25131C06735B717661612CF
-:10610000DCAFCECCEC407B617A23B717245F130859
-:1061100059C7C664B252673FA0A9045BE8466E2F18
-:1061200068FA9FEBED6A6F4733EA55B00F747AB5A2
-:1061300052657A758097E9F5EA66FA1D8513F3488A
-:10614000BD5DC2F4B8D2CAED07AE8753F977D39AD2
-:1061500099BE4A053BC20D69102AEA658C61A547C4
-:10616000ED963E854C5FA6B6EC41BDD60E87B64790
-:1061700080DC60FA32EBBDC32A80C94B1FB75139AE
-:10618000FD246FF77AA87D9612B5CF968B3CDE443E
-:10619000987D8839FF749E8F427F9DDDB88DCF6FCB
-:1061A000CFC1945B40BE6E0FE6E2F9728D6FD1FBFA
-:1061B00049EBD9252C7F25BB96C5C95DBEAA1D26F6
-:1061C0005D1C62968BDD3B344BA3ABDAB017C60D7A
-:1061D000C2FB28C7D9FD3F2BE0BE1EA017BEBFBA29
-:1061E000CEC9FD1A9C7E12E9134D0EB988DF5D48B9
-:1061F000E17B22B403E5B54AF74BB0B613C1867E06
-:10620000F703BF072795C0FCD78CFA3BE67F0C4805
-:10621000B05FFC54DB677E47B9EE1A7798ED433BDD
-:10622000C4B8E77B32DDCCFFD02E1107C0D3166493
-:10623000F7C8D94AE5B8FD93DCCCCE3ECDE1B666D1
-:10624000D40E3CA799503F4B4435C5D1A79ABE6D9B
-:10625000013C5F47FBBBDE6E52719F1EAA30A17CE2
-:1062600025B8EF0C924EDC47AA0532FA0D5BCC4103
-:106270002BE0636D09C7ABC7BA19CEFB7E67BC5074
-:1062800078009E57F8C5909003780E798A985F073A
-:10629000EF413845F7EFFA78C510B7C8E1A4E00F31
-:1062A000F30D6866F4B566948CF358393C7DB329D8
-:1062B000472F7F052E3FD939B195A3DE44FABAD2D4
-:1062C000F955D53EF7D4095D3CF1E486677201CEFD
-:1062D000BA7B307A3D4F5155FBB7D66D71E204DD84
-:1062E000EDB08F72C23E30749721AEC9F13BC62D1E
-:1062F0001AFC6E205FCDB8B908F503FFD2EED121AC
-:1063000037BC4796B0B8ED6C1EB73DBDED363C5777
-:106310005E44C9CA1C07EF5FD619CFDF7FB9FD996C
-:106320007ECCAF1132E409CFDEF1CA50437CD84FA6
-:1063300094B491EC1E63D4D36FFA548B297A0F81F5
-:10634000763FD695DEB79542CD30DC77910A2CD3D7
-:10635000490D965E12C4B21F6967E766619F3B10E4
-:10636000F44217960AF1884427F773890FEB79A452
-:10637000024B09F0961A8D4B483BAD98BF01F10BCB
-:10638000E0FB44E7CE7CEECA856EE4EF9AABD9EF32
-:1063900018B178C564B7FF0137E2218CF27B3A1758
-:1063A000E5877E35B41DCE1F3DB09A9D7BD1E43B81
-:1063B000EE6FE8779E4B61FA405D2FA01CAB774CE7
-:1063C000FC21C2B3C57C461F6F20566B1EFC3E8865
-:1063D00036EE74EE6798CEF520B8BBD9F9411F9E12
-:1063E0004F9A0EFE065D3BE96E67F7D968E3888E2B
-:1063F000EB07F716EFD3BD8FF9D19531FB80CBEAD0
-:10640000EF98FA8CD8F7BFA1134A8FFAE39EFBA14D
-:10641000928DF4CAF537252805DF6BB61CC3FD58ED
-:1064200070AC5F0F9767391F687A65464CBE476C42
-:106430003943E2FC11330ED580C970AE17EF96D008
-:10644000F1B7763FA9F6BB5AB3FD013983BDE60526
-:106450003C7AF8BC83646379062DBF80BACEBF7FD7
-:106460003829F0925BB71FF1F86B44FDBD377339E3
-:106470003F8E35B594819C3B15203ED847CC2635C0
-:10648000EE1F803FFFB009E55C7F3A6FB918EF1D42
-:1064900053C514ACABF07B2F67EBD839A193FC7ECE
-:1064A0009A1DFC7E9ABFF07B858BDA164F043A3832
-:1064B000CDEFA529D8BBA202FC3E45ED8E69A0F721
-:1064C0008BDA4757437BD14E0BFB1D1F2E27B47928
-:1064D000C1B96C3BFD4E26FD9E3505E40941BD7BEF
-:1064E000B6C51E82DFFF39DB6E62F7AA168A789F77
-:1064F00003DC8B66E2F34B4A81EFFDD7BD608F9CD6
-:10650000E6F2E48C3B99E14B5205350DD252880FEF
-:10651000EC9A758EF9780EB2CA19DAF1441AE4874A
-:106520005B7DF5F4FBFBF7BC940DCF1F77CCC7F276
-:106530002F1B3ECE06B97576DFC7723CBA9D278504
-:1065400065F04FCDD92B88103F296B9F26437CA443
-:106550006AD77EF42BCFF304B07D6EDB1EAC8FD9EF
-:10656000F51EC64F06262938AFB31901F4F3E6B578
-:1065700059C2F07B1CBB7383F7C78DDB27313DB35A
-:10658000CEF11A8EFFB8E3B537112E1B2C78FE63BF
-:10659000FF86DFE3B867F6BDC4E74B305FF0ACAD14
-:1065A000FDE8CF417FEDE1E731AD1D6EBD3F584ABB
-:1065B000120CF2F5AC8BC7BD322FD38FE70B1267ED
-:1065C000879BC9A50E37C4CDAADA191CFE620ECB73
-:1065D0006047CE691714F83DBDB25D9BF13CE09C6D
-:1065E000BD563C2F3107E00170A3F042B8B4EDC7AF
-:1065F000F9E7025CFAC03A3EC07CFCBCBD142EC375
-:10660000A2EB9EE30C20BF6AEBA57060EBDE7D3948
-:106610003C058C786A7B4F06BFCCDCBD02C26FEEB6
-:106620002E368FAABD6C5E63764D43FC9FD947140E
-:10663000F0B79CDCF3F16958CFD97D56BCCF579B9E
-:1066400017A553E22E06FE61744AF632B9AAD9DDC7
-:10665000F342E9F8BB03DDEDBBD8EF9202C86C94BE
-:106660005E8BF64EC2B86009102FF0BFA77D28FBE5
-:106670007DC16036C075F7E87036CCFB8CF6FB4800
-:1066800052301BF0E273074A9274F8F8F2D84BA824
-:10669000170BC49A4F1F013E7E5E44BB68F127EB87
-:1066A0000CF7ADDC003F483502E0F6AE1BE1D67DCD
-:1066B0008F4B90E54B9100F26315E7C7B39BE9BEA2
-:1066C00093AEFFCBB617B0FD6C8631BFEA2F6DAF2E
-:1066D000A700DC2AF9790C12BA0DE511854BB33508
-:1066E0008E9EEF3ED71662E715CF09FC5ECDA7342C
-:1066F000B8D5C8930D713E260F3337E61CC47D46CE
-:1067000028FE39C7583B29F6BED444F900C7B93C26
-:106710003BC1EF3FD0F4EE6477605A529FC4E7BDAF
-:106720002B57CDCB067857C2D948BC0775FF4DE033
-:10673000AFC07343EC9ED430C0E7A4760F2A79E94A
-:1067400026C8333D99CCEAB5491DCBC1AE3DA9DD84
-:10675000ABAABEC1DECF61EDADD04EFBFFCA5D512D
-:1067600093C4EC7B81FDBE8F39197EA741D31B8971
-:10677000E160FC9D8667E85A012E74BC9FE37812A5
-:106780001DAFE8FB8FA7C9E9EF3D8EF57F761C4D65
-:106790007F017F42EA23F1F986FE4FC0EFBFFB3E47
-:1067A00009CE34F0D5C50D039B208E7681DF23639F
-:1067B00069594A409FCF6C5D17F7F7DFBAEB3C2F62
-:1067C000471E48F94DC7D78792985D7E88CB69F8F8
-:1067D00083F89676CF24FCB5A463EA12EE9FF3F912
-:1067E0003DE6052488F6E950D28E6521E9C072188D
-:1067F000E9C212C3CC03C155EA33F1FB6847C2E2D8
-:10680000E75A034FDB44CC3B7803E410DC4B2B9876
-:10681000C09E9C7F1DCCFFED240F8757D8F07B2BAB
-:1068200044FF7B180AD88313BCBDD983C4239DE9D8
-:10683000CE7BC9C57B6DDF4BC2F525FA1DB5853111
-:10684000F7DEB073E11A1CE69176CC237963E3039B
-:106850006F0FA1F0BF7F970BEDE4C11B1B17823CAC
-:10686000BF9F74A4C339E1C1FC1E11D266FCFDA612
-:10687000216D16E3EF08C7FC5ECF1CB88704CFEF8D
-:10688000199F6BE770F11EC838F918B1E778FF9AC5
-:1068900014FFDE175218FFF75062CFF1EE6A17317E
-:1068A0003FEA01C8BBD2ED2F866CABB118E94BF9BA
-:1068B000B73CB3AE2EF8983FC265F76F177A7EE704
-:1068C000FF020F2194E60080000000001F8B0800EB
-:1068D00000000000000BDD7D0B7854D5B5F03E3391
-:1068E000679E99849964924CDE131E2128E004432C
-:1068F0008C68EB49881811EDF0A845DBE20404022E
-:10690000249940D1E22D2D131220206AD08840090D
-:106910000EF828D64727BDA888813B20225AED0DC6
-:10692000D5B6D45A3A20554484F145B9BDF57AD745
-:106930005A7BEFCC83A460AFDFBDFFF7A79F3DEC90
-:10694000B3DF6BAFF75AFBCCE50E85B14CC69E5654
-:1069500094DBBC2319FB12FFAE893D6FB1EB181B12
-:10696000CBE0AF8D4D2C67ACB541B5AF81526BD04C
-:10697000AAE99DF0B4EB824A316379A9D5E6F950D2
-:10698000660E9D7D989BB109FAAB0FBAA1BDB151BE
-:10699000BDDC04E5FDDBE6F71AB0BF4B6526983297
-:1069A000CF01E34299E5E882C3A0DC66FFA5631648
-:1069B000CC5F6283F7304E819D05DD30EEDEAD7732
-:1069C000EAB0DCDACC5836CEA3F87ADDD44F658F46
-:1069D000E1B29836A92C8BB122FC27CCA3B2B51F0B
-:1069E000EBD318AB693C6E89D8E07DA46E121BCD49
-:1069F0005895BD98F6A9BE73FD0758DEB2E498C35A
-:106A000007F3BDBA75E56F26C0788620AC0B8628E3
-:106A1000FDA2F5ED09305F74AB916D633138142E32
-:106A2000558F45CC3421FB12FECB5F9C5836322863
-:106A3000978A7231AE23AE1ECA978BF9199BCEC2CC
-:106A400059582FD6EBD418837532BBCDF9DEA58CFF
-:106A50005D6357D8978363E5B1A2BCDDD0516D85E6
-:106A6000756EFF93E26981EA7D5BE714E1FECEBEBD
-:106A7000E02BB2C33E9698D346B341E79F9FC1EE49
-:106A800016E717B0E85CF80C5B982BD67EC4A3CD54
-:106A9000261F8CD3B68C798E0F63CC1CDC6FBD1493
-:106AA000CFF1A0C10345B64261D34350AFDA981687
-:106AB00082792E17F892FC5CB1CCFDABA186D8BCD4
-:106AC0002BBE983A1DCF379A6AD5B629E7AF4BF659
-:106AD00053EDEE009EAF219F7952603E83B337D7CE
-:106AE0000EFD2E7DDEE8B101C826FC62E4A008CCD4
-:106AF0007BE94BB730772A8717AE575D62F41CCF1E
-:106B000060CCB4C4E9512FC77636C2C74F6CC6A05B
-:106B100009E1BFE4EE0EAC6FDD5AE172C7E1F5CAE0
-:106B200065768F0AEBDCBCCCEC5161832BC5FE9201
-:106B3000D757E0D07983D0CFA8633EAC5F04E7801D
-:106B4000705C644FA1E74251EE52035370FD5D80CB
-:106B50003F2D88AF8B39FE2ECA310711CF17BD3AB2
-:106B6000249BF54357F2F9F832976728AC63F3E2B8
-:106B7000992E065DAB16EEB75C07FB5F946AB623F1
-:106B80003EEAD34A1EBA1AF1FD350343BA6A4DAD47
-:106B900070CF8A1B4F9F56E94278E875815C666723
-:106BA0006C957D46AD9A83F812D8C43C8CDDD771C4
-:106BB0002D2FA7067215A87FA8E37A5ECE0C6C5223
-:106BC000A0FEE18E1B79B92090AB83F2CF3A26F379
-:106BD000F2B0C0262CFFA2E3DBBC3C0AD690CBD897
-:106BE000F31DB7D40660FE568367BA07E67D06D666
-:106BF0003F12D61F12CF17ECFC5C65FD2FF13DC094
-:106C00007B877826D73F27FAED1CA07E97A8EF193F
-:106C100060FC3DA25F7880FEFB44BFFD03F43F2093
-:106C2000FA1D1CA0FE3551FFFA00E3FF5AF4EB1DDC
-:106C3000A0FF6F44BFB706E8FF3BD1EFF000F56F50
-:106C40008BFA7792C63F22DA47C4FBFCD4F6B7032F
-:106C50008077F9C0B7F0AF34B53D1DF16E7373396D
-:106C6000E17FEB58C0F391317CCF579817CBA31D30
-:106C70002A8D371AF9313CDF14E3572D1C7A1FE2B5
-:106C8000DDA237F41EC4C356C573D807E30716EA5E
-:106C90003CC87717BDAAE778BE500DB238FA7E33EC
-:106CA00069FD5BC4FADAC47A7F651F4C7453B4C4BF
-:106CB000E59924F925D2BD3DB16C067AD260FE3645
-:106CC00027972FA50BABCDC3517E807C41BEB9C2A7
-:106CD000660C9B60FE157695EADB9CD576AC0FD8EA
-:106CE00055923F2B9CD5E659C8576DC0EC2A603EA3
-:106CF0003B1FBBCDAED606917F386AA87EC22F2639
-:106D0000D9918FB6B1A8A30AF7B714E40AF4DFDB70
-:106D10005C4DEF8B1C9F39903F1F4AE7FBDA9F7A4F
-:106D2000C0520CEDD43B74242F4AEC2AC9B1C14B9C
-:106D300075413734D96F5FA4C3F2236D5C5EC15FC8
-:106D40006A19CC3F944FCFB6DF59F15A29CAB37BA9
-:106D5000548FDBCDDFA971F26028CAAB349C373D7C
-:106D6000415E7595330DC70DB8CCC1C760DCA12A53
-:106D70007365A4C7E05EE4D073F9A29FE441B9361D
-:106D8000A423513E15B7C7C92786F232513E25CB01
-:106D9000AB8266E08F71FD4D2E7B42D9E24825F92A
-:106DA000043CC6F3254CBDA87BD1755616E3D7C964
-:106DB000F2A855C807C9775BBFB83C413E48BE9CA6
-:106DC0002C1F2ECC5FDFBC7E38E121702BF785F9BC
-:106DD000EC9B8807807F069F42F283A93E9737F598
-:106DE000C2F03218BC76BBEDC2703364BE457A8502
-:106DF000C1A7D2F8E7C9950BC055B6339A1FE93A37
-:106E00000E72EDB3777E58CA806456026CE8FC338C
-:106E100075C1C760DFF94B9EECC2F1F30E58DB1071
-:106E2000CE46D7ACAE36DC4FC7438C013EE9CD1C15
-:106E30009F8C39D576ECAFEA3457FA10283FF1BB76
-:106E40005B15C0277D46B387C1B91D7CE6B5F41B31
-:106E5000107E6F1888CE4D3AAF9D0DA1E510BEADE6
-:106E60002AB06E5D4378EC33239CF2B79B490EB099
-:106E7000C0A3AB3540EA56380E360EEBA7AFD6604E
-:106E8000DFDB95BEF2F5580E058DBC3DB068FCBF4A
-:106E90006E9D22EA99A6BA48EF14F5BFACADB91AB7
-:106EA000DAABF64B55903B8BD63DDB6E28C07A9D16
-:106EB000ECAFB14AD82FCE27CA2A9CCF93FB457D91
-:106EC000E0A5F61A20A26EA39C9F05B07DB74EC721
-:106ED000CB819E761CFFE96AD13FF0F86A2D9FD6E0
-:106EE0007383DE0145C72BEDB62B63EB5D97FE4642
-:106EF0007B0BECEF2377240DB6C11AB71ECF42F9F6
-:106F0000BC6A7AB317E18688EF05993848EF263CCA
-:106F1000ED3BB71D930379507BE6C0DFD246429527
-:106F20005F1F399002F06BDCD96C36407F93C11B38
-:106F3000C82B8EF56BDC5147FA8CBFA78C9EFDF4F5
-:106F40003BA80EFEA7FA998D1731DF47E1DF343DEC
-:106F500005558DFAE6769B9EDA337EFEFDEF4FF601
-:106F6000FFE8A9DFDC8CF39D7647B22642EB556142
-:106F7000804B3FFD64FBA69D93E9793845BBCF016B
-:106F8000EFE702EF227EA5367BB07DC8DC61F7001B
-:106F9000A02D860E2FCA0D007D5057197BDEEF18ED
-:106FA0004AED93DF27D357C8CC3226211F6F5049B3
-:106FB0004E85CC8194D1505E0B76480B2C6979D9E3
-:106FC000EFC68CC4F2B3368676496BC37ED748A42D
-:106FD0002B8F91A1BEBBF6CA500ED2795BA371FA7A
-:106FE000A388BFE145AED971FAD6BA7403AD63F593
-:106FF000CB407797C1D3107228D87F18C80D05F9F8
-:10700000A2CF8C768E25279D058AB19D6D2DD2E766
-:107010006A83AFB61ADBE5E848BE58864DABAD864D
-:1070200075B832758A9ED65173780ECA37BB112552
-:10703000283B923E7327C2E949D5D38C74F8A4CD7E
-:10704000660F4005F0480DF99F3ACC19C4B249CFFC
-:107050009A518EE795813C8FD3638F08FE79C46186
-:10706000247EB7D6129A5C05E35817E9EC01986FB5
-:1070700075E3FADE0930CF4F1B9F3BD402EFD76494
-:10708000A90CD76173AA6123C81FC38DB04658F7F6
-:10709000D32D5E3BF2D768A6CAB641BD75A891B99B
-:1070A000E3F8956D2494E3F8648653D52CD0FFEF74
-:1070B000E9BE7F77C0BC97BFF19619FBBBC6EA74E7
-:1070C000483621959F735A79E238F6AB13C749AF1A
-:1070D00049AC774E4AACCF9A9658EFFA5E6239F7D0
-:1070E000F6C4F274896FC0736C208FADBC8A5923CB
-:1070F0001F2F43790BF0F903C2DF5AA2F3207C2C37
-:107100008D8F9E9803F579C84FD01E1ACD48EEEEAC
-:107110002BFC1737EA05A6F466B763E4F9F0C82B31
-:1071200030DF80E7651BAADA19B4B7BDF3C11738A1
-:10713000BE8DC5B52B46F8685147262FBB603DA9CB
-:10714000F80F37C2BBF9CF3F46B97848EF4178E72F
-:1071500035AA34FF3DD3DC413DD7275CA8CFA489B5
-:10716000F669E6B5BD7AE0E769EFAC5E88766F3226
-:107170005CB358B3827409F8C1EDED3A46F26395F9
-:107180008ED523DEA08D80E3917A04FC626A86911D
-:10719000E0644A5784DDA8EAB03E4BE84FC69CDB6A
-:1071A0002D48C72B0E70FC5F61E4E3F48DE7A64920
-:1071B00011E519F2C98C745DC238EBEDA28D286718
-:1071C0003A78B97B7FFA0D4897EBA7A58F413C3100
-:1071D000A1DD05E30DCA376B23607F96578D01054E
-:1071E000061DA4B2FD0638CB6E2BBBCD0BEBD878B9
-:1071F000D01AD0C37BCBECFBEDA8A7958B75772F6E
-:10720000F7BC897C205AA7121C2D991DF63123F951
-:107210001E02B03E4407948B55C33A49CFB3547510
-:10722000907CB7947574209C364ED291BE917EBBF3
-:107230008EF0D952103A3414FD04B375761C2F1D0C
-:1072400004BF11067920BFC38B7E130630D755705B
-:1072500054C1716987304F8680ABD3B9E3870A8CFC
-:107260009381E38DE6ED114E0E01A7ABD3DD0477DC
-:10727000A718376328B41FCDC769AB888D23CF719A
-:10728000632D0BE2FAE4BC729CBEF199A6205F3537
-:10729000FC0AE006E7A4149A69712BE633B28FBBAF
-:1072A000977B9BB7125DDBC8CF91EBCCAF463CCA56
-:1072B0003DB8698A6E34F6B3D23C86D92C88789C66
-:1072C000AB32F337D351BFF1121C93E935677FC757
-:1072D00054D453E5B924D36F8ECADAF5E9E7D371F4
-:1072E0008ED3595D32BA1F7A4EA2979C83D13B1040
-:1072F000E993E97A4BCAE932840B8B6FAFBF7059BF
-:10730000AF0F1D423F0FCB063901A02F4C9A8FB112
-:10731000FF326159613AF7974390EF3B84FF06E4EF
-:1073200015106BF718FB781BD2E94246F855FDFCA7
-:10733000DA5B7F05E39D1D66B4A35C2938D8D18B49
-:10734000F291EDF40DC773D8ACFA1E4E81FACD87D9
-:10735000B319F2EDD5166E8FA902CF93E5CB3A4162
-:10736000376E9473AE7FFE29F5C3D0D0AC4BED40A1
-:107370007BEBEEAF7DD59CF9BFA867B1A749CFCA1B
-:10738000DFDFDB62C3F9D71D6C37037C2D6FF0F6AE
-:107390001D500EA808BF06F267ED2B98437052DF10
-:1073A0003631C4D3517A2D8865F6470B43FEBBFDB9
-:1073B000D9EFD5BB91FF644D74231FDA26E83D2831
-:1073C000ECB3E4FDAB46CD87FA44F2FB4DE93A71EC
-:1073D0009EDE1375708EA31E31B2355059AA9BD90B
-:1073E0008EF65D7435F05FA89DA97737DD1D67DFE8
-:1073F000DE6BAD0AA5A35DB2CCCC7CA030E79F5379
-:10740000980F88B3C0F99B2AE43F852CACA09C2D33
-:107410006C068517F16AB195F9E2F03DFF9C4AEDE3
-:10742000EFB56AA1F4B1FCBD19F88081FF933D99D5
-:10743000EE65754ECEA3507F313C653D8A7C833925
-:107440006BB43E7B6430E22FC87D986FB7D8B7012C
-:1074500060681803FFD97461D3E8F3DBEF1370524F
-:10746000CDB630F24BD5F6FA61E22F76F5547C3B7F
-:10747000B4BB89893530F2CB225CA8FC033B95F381
-:1074800080FF9AC690DE1F40FB3B90C6ED11A669B7
-:107490006E6716D20B2320E79B59BB19DA11B6038E
-:1074A000BDE5B05E0BE9CDFB991BE9013D6CEFA595
-:1074B00010CB6208D7CD8CD5C6D3817C4ABF84BAA5
-:1074C000444FF6D4A52F59683D866616B4A03E8475
-:1074D0006B0378AB8B59502D8EF905473BDCD4CF2D
-:1074E000C89A499F7DFA8B23B9C8A7AD07401FBB37
-:1074F0000CCF59477CCA6A4DA43FC65A084E5181E9
-:107500001F5DCBEC74CE7DF69BEF2D71CE91169462
-:1075100017858BD313CE57B6CB3F97C77C97C78FB2
-:107520001BA471F387EE57D02F937FAE90EABB96E2
-:10753000B92F30FEE001C6CF213C1A78FC7CAAEFBF
-:107540000ABFE5B80940B139BADFE175C7F4EB64A9
-:1075500038E72F4EE4CB97ED4C2C4BB8580C9A7370
-:1075600032C0DC7287CEB315C6BBE27062BBDAE212
-:10757000DF92FD1B6B1F764EC5F6609F6F85B75778
-:107580009D486CEFAD7AD981741C6BCFD777CDB99C
-:10759000C476C9E793BC5E5857E6B7E3D635DE6CD0
-:1075A0004AA89F5E77DEBA32BF13B7AEEB5C89EDB7
-:1075B0007D2DFDAFEB8652D33F5C976CF7ADCA8B48
-:1075C0006B97BC8FA9B5A601E0CEDB7F67FAC58DAE
-:1075D000FBDDFA7FDCEEB625C9F30408DF17E9B45A
-:1075E000F119503F135FA1BE68B392DE7B9E9D25CB
-:1075F000E4D344543CA09F274D9B88FD6A25DD09B8
-:107600003FC3C1672EC946BE9E27FCE84CF815BA99
-:107610001B5CE457F089F6204FDA905F746F877E29
-:10762000697C5DF1FA534603B72BEC2C4AF42CF538
-:10763000A5746657B83DCEF59D81E6491EFF1E54E0
-:107640000061BDB3968C67EF021D3E67B457A96811
-:107650009F6D51481F9855A3E953013FC6B52BE4D0
-:10766000579A75D79B0FA03FE6CAE3EE9D11783F6E
-:107670002BE8F0E0B44DBD4CC33841B67E61D98FE4
-:10768000E1F9E03E4671342C2F447CB3696EB43787
-:10769000EA704530CE294373991DF9E6F76D1AF269
-:1076A000CDBA69DA1F68BF7F07AD04DACDE65B6744
-:1076B000CF774E3662BCA3EE7BEE4AD47BEA42160D
-:1076C0008D9E66A65A611F75A08FE133DBC8540BEF
-:1076D0003EADCC8CCF8AE55CFF4AABF41AEB60FE82
-:1076E000BA9E9F7D8EFDE6AAE1BD5C9F0CD2BEEBEB
-:1076F0007A5EFD0FD4D7666B5E23F28B4BB71BB956
-:107700004E2AF0615428B18CFC20BE5C164E2C5FD2
-:107710007E30B1FC710687EF38E1C7DAB7DB447C15
-:107720007BC18756D23F7781C0433B39F0B489E4AF
-:10773000C7F805363AAF0F4F5AB7A25F6FEFDB5667
-:107740006A3FFF490B6FAF0B3D83E5C03329646788
-:107750002FC80855A4C3BA5FFC424FF0C66D19701C
-:10776000FC67466C5D83F597872A302EF6DC258C06
-:10777000F562BD1A1C8DFB7CEEBFB8DF3AFA842996
-:10778000B80DC6FDF0859F3DF3239CF789BC7405B9
-:10779000CEE72A940BD06EDC23662BDA1BE33E7C0B
-:1077A0006A08F28D05DB4D09FB7B264311FA833B0A
-:1077B0000DF16E20BFE3B1D53FA3FEA5270E13DE6A
-:1077C000ED32047418C70BACE678B6CBC2FDA4BB8F
-:1077D0002C85413CA7DD199CAEAED26DFB6913EA46
-:1077E000976F703D64A0F14B5DB3BA6AFAF133F65E
-:1077F000D5C3BCC570CE673EB0DE86FEB8E11B12B5
-:10780000CF694430B1FC7206D71366B2B8F7C5B879
-:107810009EC12B5DB89EAD8CD6537AE29D5B8B5199
-:107820001F37713D2479DE5F6770F9F9F39FC33824
-:107830009CCFE8B91E0E1003BA5E20E8E14585EB47
-:10784000C1F0B7380FF07F012A108363EF1724AD22
-:10785000438EDF22E0F4A9396D1BCA73A791E3FDC3
-:10786000C965071FC038A66CF7DE324DAB89F32B14
-:10787000CFD9B0F0400E9C7F437726D999F27DC3D3
-:10788000132F657D17DE9FDAAE7A50F56DB8E5F1FE
-:107890007BC761BB27F4215C27D66B30FEA9D0CB18
-:1078A00069D86ECE66C718F497C8FE73375CABD53F
-:1078B000C4F1D3AF4A4F92FE1B847DFC7C65EF84FC
-:1078C0003C80F7820D8A079B2D087D7BEA8DA8EB13
-:1078D0006CD67B30BE51A132AF7E0C99EED3F0D97D
-:1078E000D0FDEC815CA8F7EF1E5B81FB5AA3F3DEB1
-:1078F000300AE9658B81FC60C9E7637472FC85FE20
-:10790000611DF45F73B3AD1EE32230EE7E2CEF2BCE
-:10791000DDA6473F7EDA09E06FFCFD611DF0CC1368
-:107920003D2B4683CD02786C6B47FAD8858E0B9C35
-:10793000E7693DC90916E6FB1827FCCF0BFED469A1
-:1079400054E179E2C4F2B42A4E7F744EC8D49DB09B
-:10795000BFFA474611BDCEDD90485FB29D5CEFBCDB
-:1079600060627D325E9438A5BF8295C6E35772BBD4
-:107970008C490123D263C312E0E77174D370BCC396
-:10798000887A57F23CA8413279AE7AC24BE6A6FD1E
-:107990005AF87E41E535C37E4FE2BFB8DF5C41BB9C
-:1079A0007EBE425B640B2E61356E80E78229AC1689
-:1079B0009F921F9EAA0C8DC6F6BB0C91C77F4A7C76
-:1079C0003095F8C1297B380DFD4AB9C2AF77CA1D81
-:1079D0004E433E7746C4EDB01ECBF37B401E005DA8
-:1079E0007FF89191E4424BE8A5343CAF53CF5874F3
-:1079F0003A38970FBB33AAD11F742AF4AB34DCD7C3
-:107A0000C9504635FAF506E213C9FC4DEA0347F1C1
-:107A10009F5782DEE3D4263811BE1864C8017993DB
-:107A2000D15CD6DC0FDDCB7E4E637319E66944BFB3
-:107A30006FF3209F9DEA74D3FB3A858F877F18DF11
-:107A4000FBE460C6363CFF837B4B06A19EF00973C6
-:107A50000F42BEBD20CB7B33CEE7AAEEA5B8BE6BEE
-:107A600022F3B4429F77F59E3BED00B7DB19C82D9A
-:107A70007C96FB8CE46F69CBA475CD525958053CBC
-:107A80009D8572753495498F99B55909B6C23A6E7C
-:107A90005F9BB8CF399DA6D8F9C27FF31830442434
-:107AA000A0CD71ED60FC79283F017EF3CD2C9C02C6
-:107AB000E3CE7F34B1DF0216A6F5343CF5A5A93F2D
-:107AC000387E2EE0B8204BF33BA1AC4C31D3BA7ECC
-:107AD000F0B442F2CD29FC8CD1070705311EB64027
-:107AE000C8EBD9A6BDB41EFF5D75DAED8037679689
-:107AF000CCD26ECFE0292364976D50080F17D4B015
-:107B00007001AC6F418F121E85FAC45BFC9CE4B817
-:107B10006C0B6F77ABD07766035C507F18F79412CD
-:107B20004805FE39DB0CA61CF211B13FAC1F04E581
-:107B30007AD641FB6A64115AC75A3C47EECFA3F587
-:107B40007FFE163FBF71F55BF5B8A8837B2B28FE3F
-:107B5000F729F3D039825EC22CE9E7E309C25D8BD5
-:107B60008353FDE6C4327B34AE3C18E10AE5387835
-:107B700037EDF8D2A4F503E707FBE44970C4E451FC
-:107B8000EC3CBDF788388707BF3D2707F9C07DA8C3
-:107B9000BFE68A012A916F32E9D7089B617CEBE549
-:107BA0002CC1CF01FA15959F704E9BB8219FB1F55E
-:107BB000061FC50B66E9BD0730B49592ED7B1AF13F
-:107BC00076964E2B54891F682564EF2EE1E7F1D09D
-:107BD00098E611CDFDD8B972FDEB95505887FCE0C1
-:107BE00005AE1FA496470DBE383A7B45F0B941FB60
-:107BF0002207F2105F9E55C82FBF51616D0AC0D990
-:107C000005C782F260A372F400CA8F8DD7BB592BCF
-:107C1000D497EF98BCF065B295AD94D7D3B8A34A8A
-:107C2000DF68A3FD737D35A579AB0EEAB36F2B1D1D
-:107C3000837402FBBE6D0ABC7F5DD06D8E8DE383C5
-:107C40006B79A07811FA65F77917BE8CF43DCA4AB2
-:107C5000FEAF6C80556A3A3DDB510F75B11605DBFE
-:107C6000ADCC5478DE411D9BFECB918435EAA074E7
-:107C7000FE3C0C4F45656DE8CFCD5641AFE5EFDBDF
-:107C8000709E07D3F8BA3275FADB26A35E3D86975D
-:107C9000D3972ADA3642FE75B4AE6C13ABC57DE3DA
-:107CA0007BD4C361195A37D507094ED9E39BCB70F2
-:107CB0001DD943F8D3690CE7E338AFF7E1894F8763
-:107CC000FC7AB190BB8BB75667237F7DFD945945F5
-:107CD0003EFABA4BEA8F611BEA8F6C68296F2FE47A
-:107CE000DBE2B2F1D988F7CEC2C476670CDAA0CB5A
-:107CF000514E1CD253BCE7339B36C801EDAE32B2B5
-:107D00007EF3ECBE10E7EA3FA7B0609CDFC03FFD0A
-:107D10002CE9E7FE736AC2FB53CBCC2C18E737681B
-:107D2000A8DF3701DB35B2DE95888F8DA114168C64
-:107D3000A38FABACFDCF2BE9C27F4ECF02FDCE6B44
-:107D40004C7C7F2E830532FA6B9795F81EF6915086
-:107D5000DEF9D7BE7DE07B561949433FEA2494877C
-:107D6000503E13D4050CC0875E37703977DA1E4950
-:107D70009083A7DD112E07D14F64E37AFA643C6744
-:107D8000359A362535368FACC7FEE971FB3D3DDDB2
-:107D9000C8C2743E515A07C22F309CB14D3D1F1BC3
-:107DA000313FA6A1672FC14FE24D3C1C03F171A7E3
-:107DB000D6DEB00E784665E64FD78C1C0128B84F4A
-:107DC000F287AE35E8E7CCD2EB12F8454A791FFFCF
-:107DD0002076F52046C188DF6C59837ED25899B74A
-:107DE0008FF57F78620D8C573E92F7AFCE0CBEB602
-:107DF0009C92443A38FF55A385DED4B8B239A96CB9
-:107E000083F2A8B8B23DA9DE9954EF4A2AE7F3F607
-:107E1000A752C3857A0F6337663E3A5105BE792A69
-:107E2000273C03F3C6D6B63E3EB106F859633997F0
-:107E3000CF4D3D8A877C7F027E4D1EAE37DA3C11E6
-:107E400023E6ABA594F71E40FED2B053B12B400FF2
-:107E5000B6507798CAD8CF1DD72FA450BF86D0511F
-:107E6000EA37E0F8A53AA2F735A5C778BBD0FBA45E
-:107E700007AC6A5B48F179197FD6339F96A7C4E2B5
-:107E8000CF92CF9ECED15E223EBB5BB1237DF6E189
-:107E9000298E1BE7F791EDFF38AAE7B7A866A42C57
-:107EA000FEB805F5D93F35BE3F16F5BB3F0A79B29E
-:107EB0005E098EC0793731DF089497DF6F1CB657A3
-:107EC00007ED8E18225D18635B9BD93311F3E88EA2
-:107ED000A4460A300FEFDE070F103C8F6446BA103D
-:107EE0009EC71F7C85D717440A30EFEEFECC4F7833
-:107EF0007958A40BCBBB1EFC132F8F8A14E8A1FF6B
-:107F0000E0C0918935D0FF317BFF74DD9AC9F57BE4
-:107F1000B9BE2B866A3FC9447BB581CBA12EB089FF
-:107F2000CCC03767CC3FF9F463008719FF9242FC5D
-:107F3000ECB153532772FD3CE0552BD07FCBFF486B
-:107F40004E12BF57C96ECE41D9981E3B8FD4C25E28
-:107F500037C9914B9ABB51DFC89E3192E4488D538B
-:107F6000FB0BCE2B9FF7E7C113DAFF25D3CEF9B772
-:107F70005E47F1ECEC1FA5927E769F85EF07E886C1
-:107F8000CED726CE6383D8CF864C6E57363AAFA570
-:107F9000716E15FA74E7EAE0131680FFDB324F6664
-:107FA0001DD7CFBFBB15F80AF0F14E879683FCE4CE
-:107FB000BB22EF4DF20F7C9F1E6797749641D91636
-:107FC000B33F3B276B3956273EB37418B791FCA8D3
-:107FD000B398F7937229BB95CF9B7DDF886DB88FDF
-:107FE0001495FB9F664F2FD9D6427AC1145A2FD3CE
-:107FF000B41C05C63B3E6FB00EFD52F27CA60FD5F9
-:108000007E89F0B955F8F5E539C9F3FC8BD8F72C22
-:108010003DE815B0CF77B37C341EE819A385FF8BFC
-:10802000F48CBFE019C7C197A991B1F8FEFF2338BE
-:10803000FDFEEB8053E312E017BA8BE017027EEBF4
-:1080400095B0219BF30BB2A7F13DCA9D5F3A7D1F0E
-:1080500066C6E5C7CCF85123E995725D293F7CBE21
-:10806000F63BEC7C3A4BD6FB3EC7F38AD34F3DD26E
-:108070008F29E639F2B699E216478C21E29B47C078
-:108080001E6A41FE22E2EE15FFB2E075B407E5B8C4
-:10809000DFCDD2737FB03C77C5DB3DA718F35058D6
-:1080A000C08CFB986CA4739772B7D3C1F34A3AEFB4
-:1080B000CAA3BC92332CC2C81F5AC9883F021E50A3
-:1080C0007DF4962CA27F681FB060FB7997507BC02F
-:1080D0008B00F1875BAC64BF74629C1AEB6F290D57
-:1080E000621E0CDACD846FF374346F3FF8C2FDCD9D
-:1080F000C3799E85C49BAC56EED761AA367A729C32
-:108100009CBF228B9F734A79E4D9DFA35EBBD64222
-:108110007A2DCA588A097564D33870FEEE2CEE1792
-:10812000203CBBFDDE5491CFE6A940B8AE4AE578CD
-:10813000B9D9C2E3559B418F26BE28F057E6D3F943
-:1081400084BE17A9D7A5A1BE303AABCFDFA0A1FD51
-:108150004FFE72A89F19518EA2DD3633A00F9BD01F
-:108160000E6BBF568BC4D931F887F1BEDB045F6557
-:108170001B18F90F6FC37E6938BE350DE39BB761DD
-:108180007FF4D72EBD36218EA76571FA96EB4BE6AC
-:10819000FB5A96F04B763CA4C5CF23C74F1E0FEC7D
-:1081A000D12A840FC0393C08CFB7454FE797BCCEE2
-:1081B000C806EEF78E6C2822BC93E30DB4CE3FEBDD
-:1081C000A377282007E78CE776BAB47F660B3B9A43
-:1081D0002D4DB4EFD0CFD257D69F5F4EB617313E5C
-:1081E0009FD89EEB2D2923A346A25BB792B07E09B0
-:1081F000AF81E030F72BC24DCABD872C4007E9683C
-:10820000862B84BF1BEE4A2139E6340647205E2DBB
-:10821000CA7253BB4D9827437295DBCD9FBE2EFD8E
-:108220001E89F6B2DF1ADD82F0F25B19D1D3E9DDE7
-:10823000A9443F6C686406E6999DD9656288BF4D84
-:108240004AA404F9D66945ABA3762D296EA423E987
-:108250005778F739EE57F02324617DFEC07F529E98
-:10826000937F67A21D7D1AFEAB07BC3FAD8B54E028
-:1082700078921F801EAD917E54CFE33F4D3A164059
-:108280003BEB2ADDCC799CCE73D9367A7FB464512E
-:108290009C9E0EEDF62BE91C7D906E1A041C9B74BF
-:1082A000C7A85D03E62B213CD1DE423F1956C6F933
-:1082B000759BD67E48F9524D3B12CFBB21860FCA23
-:1082C000970AF68BC30FA2E780E0078CFB3B6A7826
-:1082D000FC3A5594536A7B297FCA2FFC1F99FB22D5
-:1082E0001390AFA49687D84C78FA4F707D635CCF1B
-:1082F000D697D0AE76D4F6162019F8859F509EB743
-:108300005CE7953DEBC8DF21F59438BB73C494045A
-:10831000BFC372EA87762CCE17C1573988065CBE78
-:10832000AD17F22D050D6294831DC3490EA29C4228
-:10833000FE24ED60E457C82752B2ABF720BD3E9251
-:108340005DFD02E76B8067A8D7A35175E5C0FE3DD0
-:10835000091FD90EEDE17FE4BF7B55E0ADF4ABD34F
-:108360008ACA31DF3A53FAEB28AEB748716723DE89
-:10837000BEA7F7915F6E2E0B909F681EFAC3E0D9DF
-:1083800020E87D8EF02FCD117E25F4F7C6C71FD1D2
-:10839000EF1A5F9ECF7A39DFD86E8AE5E5A01FA875
-:1083A00086855361BC46F453E13394D8AF8945A91F
-:1083B0009F7FE797A684F86627DFF76DE2FC1D35FF
-:1083C000413DF2898D16EE9F92FC63DC52EEC71A96
-:1083D00034462B5E8178FEAA81FC1B7F11E7D6E72D
-:1083E0002FCDAA7E290BE064D5F37B6CD11526E254
-:1083F0009BC7411E770BBFCA14B44397310DF3DE00
-:10840000996A2F8CB753E573CD2E4B3DE2CF67426F
-:108410009EC9F7DBB30CB41EF237115F4E21B90BC6
-:10842000EC6334E257C5602917D968F4731D1576DB
-:1084300073D3CD361F8E17D1717EA3647339A564B3
-:10844000F3BC3E59EEB3F304FEC8B821FA7DE2FD59
-:10845000EEE6BEF6EB843EC968BFEBE789BCF03EB2
-:108460003CD6115F4A19E925FE7B95AE9AF852F485
-:10847000039B1BE152FB61C33CDCC727D3AD74FFF8
-:10848000EF76E10776653B687CE9F7BD503CAD7659
-:10849000CD08E297B27D1E1A2863CFF71FEF127C3A
-:1084A0006C17E3EB0D9CB0F23C15950590AFED0A0F
-:1084B0008D08E27AEB84FF01F51BE4AFD167F9394F
-:1084C0003295EB43BB7A460511DF8F1A7C1B67A3FD
-:1084D0003FA7DB407E39A6069F781CC7D993E3C12E
-:1084E000BCA1D3BAE8965F43BB5D277E9E8771A28D
-:1084F0005DC25FDF600C9790DE2CF2241BD2C22598
-:10850000E8077A519C578315CAF03EC3E22BCF1E71
-:108510001B8BA7613F7C7F2CC8F5F2638CE3416025
-:108520002D8F97027C7366E37A5767533C0ECF0515
-:10853000CFE1DDDDA3685FEB0DA2FD0B0AB557A609
-:1085400094CE20B9B0C69481F03FE335529EAFFF80
-:108550003EAE37CED2B9B72C415EB92785F637BBD0
-:10856000F310C549FCF7CEA5FB93FEF94B6F62FFF4
-:10857000207E807225DEEF7D9A450BC91EAE1F1C42
-:108580000AC33A4EF78CF0F0F01FBF8FD324F249A4
-:108590008F1B9886EB8EEE3604FBBB2738D0F8E4B1
-:1085A00040ACE0F28DFCE3F1711A920789719B0BEC
-:1085B000954F1B222577C1FC6B337C73B2E3F445E6
-:1085C000FF9E1CE277EFDEF3D742D22B3A789CE194
-:1085D000B8419B8174E2A8091B67C6E9613FC916CF
-:1085E000F68749E88FC007E3E95ED6575427D2994A
-:1085F0007CFE389BEB21A922AFE0FC7A99B736D5F7
-:1086000084F293BB96705C37BD2F12F1BA7127A22A
-:108610007B313FAB215446F1C0A2A561A24B8077CC
-:1086200018F5FFE31B53393F816DE238732A19E9CE
-:10863000AF73F43C4F628E09F4612EC7A9FD7B1B1A
-:10864000B3090E15CBB91E187D5621BE28E39675C9
-:108650008CF77FBEED68400FEDEBB62B65C05A5925
-:108660005D5B15E551CCDF5C4CE73F4EF0DF5926F2
-:10867000AD6423E2DBF33CEE05F391DEDD80B9620D
-:1086800063882F19511ED66F5718DE3796FB4F8E11
-:1086900013B260629C665C88F36F941B2C4E5F93F0
-:1086A0007208E5054BD22313F12220E257FC7C7EB1
-:1086B0002EE02AF93F41EC1FC841D0A79F44FCA9F6
-:1086C000A8E6F417ED5608CE8DAC99C795841CEA40
-:1086D0005B8F9063EFE9B9DC9C635A47CF305E1E35
-:1086E0001B8B7230C2E520C835E48B03E14578006E
-:1086F000BC90F8B017F701E3359C60E16FC07C0DCA
-:108700004B59B871347FA68E26B9CCE5B399CB67A7
-:108710007C5A2F424E27CBE764799C2C87510CA1C1
-:10872000BC957810EFA7477D64DCD2A09EFB61F377
-:10873000ED981F28CFA5D1A91DCE1B1BD3B7FC8751
-:10874000CD66F76558F6B2C136F42F55DD5E00FBF5
-:10875000F7ABFC9E720AC0692BBCEF12FAF9E40277
-:10876000BE7F97C80332A85E5666C373EA257B3A7C
-:108770009AC928AF5BC2B72B15FA8DC17E5CFEF596
-:10878000F537B3366B5CFFEA5D16922F675F48A53D
-:10879000FB684CF5153960BCAC3F829E0EE5D3BB3F
-:1087A0005249BE9F16FCDE29FD166C259DD76778C1
-:1087B000CE998875D579E8FF65CAC43C46F7B4B947
-:1087C000DED8E818C86F2FEA8B7B6FE6786622390F
-:1087D0007BD611B913CBB01ECA333E25CEDDBF63A5
-:1087E0007CD98F303FC06BF370A8FACA506F30E964
-:1087F00017DF6CD6E37DFDA5D1BB601F8D0536CAA2
-:108800005FAE297AE777B740F9831D06BAE738EFFC
-:10881000B1A983C2D84DD55CFDC9E7794143C2FDFA
-:10882000B905DB13CB8DA1C4B23FE9BEFC9277B68C
-:10883000BEB63FAE3ED395EAA4F377330FE65F337F
-:10884000FDF706F9FAE197F2F9D765C1D7F60FA35C
-:10885000FCB57C17CFCB31A25E3313F1A19F7E6FA5
-:108860000ABDC6646A3E8179F0A6174D74AFFE4416
-:10887000B66F18F66FD2450FE0799A8A4E8D463959
-:10888000585DF4778AA79DFD31F3207CCE5AAA4823
-:10889000BF39BBD1E246FBACB3D04678D0B947096B
-:1088A0002A5C7F9F34B602E3A7B407E6DF70FD07BA
-:1088B000FCD20633F37BF860BDB890CF68644FBD3F
-:1088C00037D96A5F0EFDEA377079DBC07AD3900F33
-:1088D000CC7771FEE3D73F6534C33F8BDBB4112DFA
-:1088E000B0DE055E2BDDD751BF50E99EFA2A1C325F
-:1088F0004EFFAF72093FA93962ACC2F9FFBEB8168C
-:108900005D63D2CF6532F834BC1766D85916CE8372
-:10891000577397BC44764E5F1C7A37E75B73EFDA88
-:108920004BEF9529B5B4DFF760BF089797369A6883
-:10893000BFEF15D8C8CE7CAF8BDBBF73EDC6A09957
-:10894000F48D7319789FF6BD2E03DD633F1F1ED78C
-:10895000D1BDD6F737BF427EB8F7199F37B0434F26
-:10896000FACAFBF6684518E1E86E4E437DB77EC350
-:108970003CBA173BB74BEF457E36B7EB8E5F5F894E
-:10898000FEA329B796E396AE712CCE72DB62F55248
-:108990004F55D32B1F473ABCE68BF1BDD7A0BED4B1
-:1089A000057452CCF3EE514FDFDF751DE9A5732737
-:1089B0005B1DB82FF7E6C726A0FC787F722EDDE39B
-:1089C0009DFBB4C2F0D30D731D4BB2F0FD5C45F5B9
-:1089D000F6874FCCC5FD6D5545364F18FBFD564FFC
-:1089E0007802747533CACFC62E03E9BDFBA7BCFD60
-:1089F000BB5B9C31BA52A66CB8691CB6FF9981DA90
-:108A0000F7E93B9B6F94F8C2C215685771B825D33C
-:108A100099A9686909AE2B99DEE62E6F2EE1F1ABBC
-:108A2000AF46776C33BFD7DBE652D897BAAF4477FF
-:108A300077BBC65E3CDDB1FCF4047BEA7CFE16200D
-:108A40003C95FE7FB387698FD928DEAB29C07F773D
-:108A5000B8F8BDF51D2E7EBF4DFD8F45DBDF00F85C
-:108A600054BA7C5DB88E22A695A1DC7447EDD5780A
-:108A700017C926F439B6D924ED00D2EFD767B2C7AB
-:108A8000D7C4F91F422E6E27011F781CC739FD87F6
-:108A9000BF1FC0736A2A3C351AFDBEFE739F51BCCE
-:108AA000D0D6C3E3CD364F94E2F006A797F050F24C
-:108AB00077BF87CB9FF3E0E5E2F73BFCCE288DF351
-:108AC000560EE7CF9D22BEB2698995FCA99B9C41B9
-:108AD0000BF72F0418CAA749957A1E2713FAD68DCB
-:108AE000C21F692E7F89617C8C5DCDF3C2DE287F39
-:108AF00049CD80F2AF2BAFF5D07DBEF247DA07E368
-:108B0000BEAF3688FA21F4BD8D7FD7AAA87E914BDF
-:108B1000EF46FA9E54CEF322597D1AF94DDE287F96
-:108B2000D7797BDCFABDCCECB601DE4C01628DCF8F
-:108B3000C3BBE96A8BDB16873F9F7428B55CEF7572
-:108B40000F9A368AFB45481E9727C26391CB48F39C
-:108B50003E925D7508E17CCD37F9799C7CDA14444E
-:108B60003E7852DC8F49865FC425F0471D9110B7CF
-:108B7000771A438528273F5412FBCD6FD753DC7CEF
-:108B80005EBBC28230DFC9279E2F447EFEC163CF09
-:108B900017CE8C5B4F723FF93C29E7137EC1643FCF
-:108BA000EF40FE5DD9EECC06E6330F89B53F53FFAB
-:108BB00037F2EFCEEC11FE614D1BEA447B48B44F17
-:108BC0001E2F3397F36B65A7427E0FE9DF3C76F0EB
-:108BD000118CA4F49D9FA5A758179FCF289FE3C48D
-:108BE000B94DC57383AD58DA7979A0F31A881E7F21
-:108BF00021E4903CB763ED4306211C8D4D3695F181
-:108C00007B6AA5A8AF7731AB07E9E9AF22AFD56999
-:108C10008527E869C65C970DF999FC2EC00FAD69F0
-:108C2000DBF0F95791F7EAB4C213C629C82DA5F1B4
-:108C3000FEAAF3925DF7437D07DD5F74093AC966CA
-:108C40006145C14F1D2C784EA1BCAFF6447867B585
-:108C5000723912AD3392FC9270BF6AE69D64BFF622
-:108C6000735E1B108F722BF9BBC939C5C2DF11A10E
-:108C70003882A592D9D1BE6FBD3240EB90E7E5E7CF
-:108C8000CD99D2A390FE8CF92F29E9142F0D8827B6
-:108C9000B3A5B3BEF8418AB0775952BC201BF46E1D
-:108CA0006C27D70965CAA3B9CF11EA28E1F156D2DA
-:108CB0004B715C7C3F73A44AFE766C671C7361FC4D
-:108CC000EBC35391973849BEAFB7F61B9F9884F713
-:108CD00083F01C403EA25EC83C8684FB419B419FC2
-:108CE000463B4DC67FF5BA50998BEC93DE08FA4FA0
-:108CF0008C156637CADB147DA814CF2F391E0CEDF6
-:108D00008A791E42BE03E58CBCFFD3B464BC17E372
-:108D100054A07F04CC787E93F9F935DD5545EF9565
-:108D200029A52D885FFEA58CBE5330BEA79BF2A45B
-:108D3000FCB55C1FF3EF3C6A6480BF33853F870955
-:108D4000FF739638D76342FF8EC5BB225B30EFBB03
-:108D5000735E3EDDF74DCE2BF9AAF1CE33A900901C
-:108D6000CBE2E25883CC5CCE88F397F42DE35AA98A
-:108D700023BDC5A889FF2E3BFA2BEBD8AF90371245
-:108D80003878CF3FCE1B997613E68D9851CB17F5E7
-:108D9000B80C90A37DF7F92C6E8A7BF5D5E3771894
-:108DA000CC3B15717F8FDD74ED50CA3715E5D7D6F2
-:108DB00062DEF87D1696305FFCFAD4A4F10D30BE69
-:108DC000CD2DDA074EDE70AD4AF15F513F712DE6D1
-:108DD000C9DC67481C8F5050DE3F34C7E6BB7DF3CB
-:108DE000867BD6E6C7E439C8F78D396363727DD5D3
-:108DF000DB933A2E73237D7D4AF9BB523EFB9D3CAB
-:108E00008F24998F3D9AA348BD78028ADC55D317E9
-:108E1000D2770BFAE2BF3D751AEAC332FEEB5FEA86
-:108E2000A53C5ED007B6E7903E70EABDBD0CF5CE1E
-:108E3000936417F8CFA9DC4F047A057E87C6DC530C
-:108E400045FE504C4F1D1677FEF3859C421D1EE9D2
-:108E5000C1BFF93B8FE9B13E57EBCEC98CD987C969
-:108E6000EB7D2D87E7B9FB4BAB37223F608F2AF4B0
-:108E70001DA835A59F90DED1F4C2B563E3F3D0E71A
-:108E8000ED7C90E7316F37F4BBFFD772F877629AC9
-:108E90005E7896FC9D2783FCFA4CBD1A5C8D7A683F
-:108EA0007DBD0E352F561EACBB85F481E9B00FD8C1
-:108EB000572887C3C7BF7D6A00F3E2FDF09F02AF6A
-:108EC0003679E7905DB069BAD986711C7FE9CC85A7
-:108ED00084FF76AB86FB4F5E672CCE6CA5FBCB6B1D
-:108EE000761A6A518FAA00BDE95F61BD05E9136B6F
-:108EF0003DC097F2F4DD653FB061DCBD7FB9ECCFDA
-:108F0000E3E7D8A67803DF2A273F278BCFE329DAC8
-:108F1000C9F5B3A339C604BFFAD11C95E07975A091
-:108F2000773CE2DC1E3592827AB29F691FA3FDCBAB
-:108F3000BC3637F977198FB33B97B9C9BF6B764603
-:108F4000EEBE8CF42895E2CCD2BE38FD02F78B4DF4
-:108F5000CDF59D46FCA8D0471EF816C2ED6E55F81B
-:108F600089399F299C6A1B837E2C8B33F240AD9BF1
-:108F7000F26FC82F31E81B6D740E7B9CCC8EF019FC
-:108F80001FA85395383923F9C6F8BEFB3B4EF29F14
-:108F90005673B6C686C169BD6726146DFB3223A61B
-:108FA000271CFCFB34155F4AFD4167F6919D533346
-:108FB0001DEC46C4BB95D1033AF4D73B7B497F6C8B
-:108FC0000C29344F63E92F293F6E81C8C3EACB8750
-:108FD0005223941F66CE4D117EA6368E97AC97EC29
-:108FE00062F614873FC84DCA1B8BE9F12DD44E8E13
-:108FF0006714718646E1C70140517D46AE22C65DC9
-:109000009E189F10F332D55D11EF77583F19240950
-:10901000ADCB9D86EBBDD7EACDCF85F6C7EA75040B
-:10902000A263ED29F45DAAF54AAF86FEC84019CFC8
-:10903000A74DC6A33231EFA07DD109284FA22F0C36
-:10904000944FCBF367378EBD84F2D0CB777E3C0153
-:10905000F183D532A2C7A69D17974F5B81E731F602
-:10906000FFA17C5A8FA26D83E775B98EC47C5A0F1D
-:109070003F2F19D74CCEA33D9D135679BE5B64CBD1
-:109080006368B7EF34519EC8A49DAF1C46BFE62469
-:10909000330B519C37497F38E29CEACD8579CE7CF1
-:1090A000F4DE96150CF3B09FF3F07B9989FAC0407B
-:1090B000F600C53AE2ECC699126FBE267B40F26B11
-:1090C000BFB0AF3E54A2F796E0FE76EBEDFDDDA318
-:1090D000F1E7CAF8D80079203DFDE781C87B66B585
-:1090E00091E284B8D55D7D74F0D5E2604B5176F69F
-:1090F000130753455E97AA70D6C11C3CEF47C6C103
-:10910000D4EE1114DF32C5E26061D64F1C4C1571EC
-:10911000A55506AD8EFC34BB4D6E6E477B897FB581
-:1091200075677A90BFF9E79F7C063F05A03A26B89D
-:10913000506F6813F06FB8F838D883B9FDC4C1B662
-:109140000ABDEDDD525DD80870DDCA38FF0DF4C8E8
-:1091500078988EECDAE83D05B46E658A99D6FDEE16
-:109160001ED336F44FCD9271AE3DDCBF364BC4B347
-:10917000DE9D5242FEA781E03CAB3D315EF0330103
-:10918000E7B3962AF2D3DF79FF64F2CFCF41FFFE37
-:1091900090D87D0926FC7CEE767E9FDEBD5DA1EF3A
-:1091A00099229AE84827B5D3774D17001BDD84AC88
-:1091B0003700587305BC56740AEA43EE362883D24A
-:1091C000AFAE56032E68B7F5700AF9155739DD2290
-:1091D0006F8DC79D036B95E0303E2E7DC72CD0A6CA
-:1091E000D3709C5772B93FEACFB9C67EBF23D16610
-:1091F00010F163315F0B837387A74EE1CF55E23BDC
-:1092000079C9F090E3B5199ACDE8DF8B16F0EFA19C
-:109210009C356AD3C9EF9C5E42DF3D6A4B6D6EAFF1
-:10922000E5F544B3672D512FD57F43E50A2973A790
-:10923000E37A77E772FD2619CEB33B12CBC9719F53
-:10924000E47B5AB3986F78CE90F3EF31ED16FCF6CD
-:10925000EC9A62712E1E8AA3B419DCBF29A6F829E4
-:10926000FFAE514B3E879BAE803F073B6AE8FB74E5
-:10927000402F5C8F637CFD83BFE154905EDA1C1C41
-:109280006FFFA7EB4E5EEFFBB9251CBE0E4EAF6D18
-:10929000AB952087175FF7C5FA490C795F2F5F7C84
-:1092A00057F13C1E2EA67EC41F02F71888EE765991
-:1092B000F8FD4BC9AF28B107ED4F61EF0E42651ABB
-:1092C000E3A12756D2F78936D50F4EC378E9F8A91E
-:1092D00036DA47D31E7EBFB77169A410F1BAA93A36
-:1092E00052D2DC0F5C710255F2576837D3C9F87758
-:1092F0006EDA13E37FC971DDB5195A415E26DA4B88
-:10930000EF76BF82E7DD6D21F9DAB434FA38FA0F6F
-:109310007C19BEA1587FEAAEB727286EEA46FAFC50
-:1093200099DDC3E95EE2CCB6C47B5E6C6D625C9194
-:10933000B5A7F3FB6C9D89EFF13E5342BFF3E28C7E
-:109340005CBF596FF48D40FDF39A6FF23C8A8FE653
-:10935000E9189EEB47167EFE817B5205BFF694C44A
-:10936000CB83AA01CF17DA8DC4783ECF1F95ED1BB2
-:10937000F17CE15C1BC4F97EF4EC152578BEA7BA3C
-:10938000AF28C1F35D6FE8D0903E52B27DD7629CAA
-:10939000EDF8B55ED20F65BEECC5E2DDB4BCAFD76B
-:1093A0003FF755E5719D9CFF2BCA63FC8BF79BEC47
-:1093B000F9BB3E6021F9C2EFB5C6FC7727E9FB5E39
-:1093C00067CEE914E4C7038DF789B0975C66164051
-:1093D0003DACA23A42FD2AFEA663A80F4A3D387969
-:1093E000FD8BC5B9AEC8D30EA35D28FDBDF5626C7B
-:1093F00073F053AE6F3FAA903FD7EC0EA48D23FBC2
-:109400006AF6E57AE22FFF4AF725588F62473B65F7
-:10941000DEA32D547F7AE72CAAD799C361B4C71A6B
-:10942000A11ECBABAE4ECC7F36EEE0F12069FFC281
-:109430003ADEC275A438A346C4CF26D4AF61894DA5
-:109440002AF77B37399927C0501F4EB417655C77D0
-:1094500093977F3F66538F42DF91CA32FA8AF3F1C6
-:109460005C93E2BBF7E769DD887732CEBE204BEB39
-:10947000CCE3F9678508A79FE2A2A01C31C87B5BFB
-:1094800089F70F0FEEBD99F4A1CF997750FFF968D6
-:10949000C184F8FB1C714F748EB8278A7C3A9CC437
-:1094A000A7E3CB0D71F968E1FEF20AE2F2D1E2FB2B
-:1094B000C5E7A38513F819A7FF6CFD228A7BFB0182
-:1094C000CF978C89E16103137F1BA2EFD2FD97ED4B
-:1094D00026F2AB35887C547FFD31B257FC789F86ED
-:1094E000D3A3C6EF61737DA801EC40CACB0D25E67E
-:1094F000AD1EFC9AE953B61BC87FFE66123DCA7DBD
-:10950000C97D34F4289C7E92D6996CFF26FBC1A5B8
-:10951000FD7AB17CE9FDAF591E7E55BEF4D9D7C4A2
-:1095200097CE8B270C8DA679BE8678C207EE8E2C3F
-:109530007429CAFCE1F6DD3C7F7882DEA6F1F8A54D
-:109540009EE73724C771DD13284E29E3C6E6E7F40A
-:10955000C1E5C5D4DE83795F8DBB5329DFA0DE5D15
-:109560004F7A7772FC723EEB9E8047F1397B9DEE1D
-:109570006FFD4FF306F2F3C57789DDACF82BE60DEE
-:109580000CC9FF0AF1CB976C9F66F8E2F0A57A242C
-:1095900028F02307CEEB2ACBE7F89722F24BCC6AD0
-:1095A0008039E2FA0FD4EFCA7CAE1FBF24F291EEED
-:1095B0004B4DA17BFF2E23BFAFE0D2F1BC2996EB30
-:1095C000BD2A3F13E5013FCF875FF80EC3FB670F4E
-:1095D0001B42740F3FD068F3A01C937E2739FE8393
-:1095E000397C3F174B47DEFCFF5DFE71AB9CEF62A1
-:1095F000E36F1B000671F4954C0F03F51B88BF2C1D
-:10960000C8F7CEC9277B5C1B4D718B8BE44B29E5DA
-:10961000C0B7514EEF30B9D17E403F0AC9C7B53906
-:10962000D2FEE6DF25B8AF80E4D747166E4FC8FB01
-:109630003F72FF3F1910DEFF9C9EF76E96378078D1
-:109640007EBC4AA3FB03AB52B97C893EC1F387922F
-:10965000EFC124CB15798F43CE777FFEFF2D5F7D41
-:1096600058C2E77FC85741CE92FD32609CF6BCFEDF
-:109670000191C7D9AB897C19BA0F21D7E5EFE579FC
-:1096800077BF10EB93EFD70939F059BE1642BC3AB9
-:10969000F507B319E3A0E5E59C7F36796D144768BB
-:1096A0000AF1FC9AA6A58CEC7E79DFB5D2E5DB85C4
-:1096B000FD56BD6DA3EF9E36EDDCDA3E98F20F7CD1
-:1096C000A4DF9DFE037F7F22DBB707DBF9974612FD
-:1096D000E215155F7EBAB2B69CD64B76BBD39478B2
-:1096E0008F2892CFF386E4F34F7DF005FB04FA9DBB
-:1096F000AAE779DE7EA766AFA2BC03EE0F4F71F733
-:10970000921FA8690709094649A758FFA37CC29B75
-:10971000A61D5565F4FD8190A58CBE5FF347FEBD87
-:10972000A75377E506F5DC7FFE5B5C6F6A79F07A1C
-:10973000D4338B601E54494F755F5F46FEC124BA17
-:1097400093F4D6777FF4BBE660AB12A3C7F5062E81
-:1097500027A57C7B39DFCDFDD54E913FD83399CD00
-:10976000B6C5CA3667625EE58ABC6B5FC6F5BC9C4F
-:10977000CFE30532CE5E6C06EB73F0F978582CE23D
-:10978000EC93457E040B98637911832F1C6797EB4C
-:10979000936519674F39277E5FC06E24BC486DE71B
-:1097A0007C83015EA09E7D75B4773CDEDB1ADA19FE
-:1097B000BE1AE13508C14F79AA91BB2FC3F845867F
-:1097C0007A35C62FB62C19B30FE3AAEAEADE6FE0AA
-:1097D000D1B83BECD5686256BABCBA02E22FCDA52F
-:1097E00088FFD5BF35F07CC6D52924EF3B0B1B285D
-:1097F0009FF1F4DBA6847B3AC9CF005BEE42BFD178
-:10980000E0F637297E90BA43E9374FB5AAC046FB48
-:10981000C4F6E8874A6DEF0D54A25FE51E857F3BD5
-:109820001256AFB8D0FE5775A877CCDAC9EF7DCF06
-:10983000EA70549B899F2A3CFE72B593F8A4BAFA49
-:10984000061DDA696A0BA3EFB45516703FF6B04EE9
-:10985000BB0ECFFDDFBED0F71B571B5E10CB8F4377
-:1098600070359AA2075CC5B178A0CC8B1BE8FBE7EA
-:10987000521E25EBB3E7E9B1421EF5E9F349783C06
-:10988000503F89DF129FFFCDC0480FFB37C54CF713
-:10989000C1245EB7C93CFF2FB85FB748E4DB1C5B4F
-:1098A000F39FA3F97D77194F09F23C294364651EA4
-:1098B000C12BF2CD00EE7B8743D73492FC614D344F
-:1098C000CE6AFE7DB5A2F621CB2BCBF169670A2CBF
-:1098D000E1D8AE0545489701C08361FDE081B180C4
-:1098E000DF575157A7D0B9A9EBE8CBD24C7564D15B
-:1098F000B9A90FF2F361057C3F329E2BFD969FE5DF
-:10990000FB6E463CECBBBFB5C4CAEF6F89FBC1A977
-:109910004BDE7E1AEF456D11FEE37D7B2EA5DF85C4
-:1099200038BB5A55504F3DEBA8A3DF41AA2BE0FAB4
-:1099300052AADACBECB678FCDC4779B58377F3FC36
-:109940004055DC7F56573BB7223C6B9C3ECA1FFEFE
-:10995000465B987E3A618FFD38C5E9402FA27BAE09
-:10996000275F50A45E94200FA5DD966C8FDD51F02B
-:10997000BFAB2705E47C5FD5CE6289F6665F7B6965
-:109980003F26DB1349FD07D27F981648C8937940DC
-:109990009CBB94EFB98237CAFC99BEFBCE2C68C140
-:1099A000FB12239028C7C6F28898C82FDAA0583D2A
-:1099B000A82F0D9447D497E7C39A2FE3FEC8E62B50
-:1099C000F029F390649E9105F34D32CECF37B1600C
-:1099D000BE4906FE7E06BF372DF3455A0D6ECA3FBF
-:1099E00009FC98511C5199524BFEBA74AF91F0EF9B
-:1099F0000C0B6EC4EFC707A6D9E87E38DE2742BC41
-:109A00008F2A2E1A777CAD26DBEBB07DDF7708EB53
-:109A100018D5A70FD572500FB3403D7E1FB9EFBECA
-:109A2000F46CFEBDF6E47C1399F724E3C0B9C39F40
-:109A300053D02F8A6E7FCA3FF881E857CCC7E9FC24
-:109A4000BE9BF846562BCF6B8A5EC9ECE897AF9663
-:109A5000FCC79C78AEEB155F31D2E77A2BFF5E40F6
-:109A600017F3B4EBA17C77C160EED761EEBD3A622B
-:109A7000D81DF47B0F9B9CDA6B0599317C92EB62CD
-:109A80001BF8BECFE0FD302536DF99797F2B44FDF2
-:109A9000AABAC7C4F13269FE4D7DDF6B095A509EE8
-:109AA000FCB980F1EF8C26E9BBF2F96789FF822FC0
-:109AB000CBF907DA9FC4CF0BE9F112FF06C2B7401A
-:109AC000B538A72329A47F487CDBB76C3B7D877022
-:109AD000FFB2103DCF5894901EEFD55AA233903369
-:109AE0001EDFF25F37E1F73CCEA4460BF17B20D1BD
-:109AF00087F55E2A67468F6099155DC1CBC3A25B6F
-:109B0000F0FB20590FBFF82D2AE379E63276AE201C
-:109B1000F4AD808DBECBB5B217E55679521E4BD24F
-:109B2000770C52C4EF0765DB8CA44F668BB81EAB75
-:109B3000117A3D46A0A0DC9A5346713C1B73EFE8B6
-:109B4000C5FA7C13FFDE0103FCC7FA61C53C1F8226
-:109B5000F17DB37CE19F669100FD1E60B183FAF751
-:109B6000F1F11D26119FE2F31F7A96C711655E2F52
-:109B700063F602D4876C6E965096DF0161AABD0031
-:109B8000EFFDB74ABF9F28BF98E2CB2D8CD3970E2D
-:109B90005DFBC391F4BB24CFFD6828F2CDEB8C892B
-:109BA000DF7596CF3F14717BE58CF87EE11D29BEF1
-:109BB000218599F8BB243326E0A768A76754191DAF
-:109BC000A4BF3DA1473E9529F0C3318DAFCF51E3EE
-:109BD00055F0F740E4F703337D2AF90998AF538F26
-:109BE0007235F3B897F2051BCCD142FCDD9637CC29
-:109BF000BECB70FCB37547EFA47861EEA12398DF6C
-:109C000071C8D0313E0DE548B1F89E040664A17CD0
-:109C100020AF88ECC13EFE304CA178E6A469FCDEA2
-:109C2000EB441652F19C27D8F93DAC09E5C59E5688
-:109C3000986F92C80F9970D89B86FC6DC277222AC4
-:109C4000FFDE45548DCFC7904FE632B8E3E9E17AA5
-:109C5000775C99E1778E13CB377A12CBDFAAFC625F
-:109C6000787C7994A24DC47DBEA888EF46007FE140
-:109C7000FBE279873F17F6DCA52E662E427F8553DF
-:109C800009A0BD70E9F3B9146779BE9251396BBB75
-:109C9000799B397EFFEB743C0E2DFCE0F2778DB0A2
-:109CA0000EE5ED737FC8227865D980DF3A89FB1015
-:109CB000BEED1374BB4FD069459ED98AFC7F9FC10E
-:109CC000BD99F03CD5EC463FD5DE54237D37B675C3
-:109CD00021FF5D0425CDCC8C30AE7E262F433BF694
-:109CE0004DA8D75798299F649FC8D36EFDB14A7E6F
-:109CF0002EACC7EFF9EAEFB5927FBB26ADF47B58E7
-:109D0000AF4F33D23D89BDA9153E311F7DCFFED166
-:109D10005473187F5F21F9FB9D87705D083758D712
-:109D2000637C1D448FFA0A23E9E1F2DE3A8C43F1A9
-:109D3000377DAE99E6DBE7B0EF45BC6BFD80343D87
-:109D4000A8AF7463FE97C4EF9AB44AFABD12A0BEDE
-:109D5000A1F1DF67D76779DCFCBE2DFF1D8ED2BE77
-:109D6000DFE58069A11DFE861123BAE5F1BC020979
-:109D700077A66AD83E87C932BF6F96D557AE52E9EB
-:109D8000BB418A2CB750F921512FBF37FA4EA19B06
-:109D9000DF4BEE79E53F106F87A6015CE09C3C2924
-:109DA000FDDF777AB290F3F7F3CFAFC2857E7F0500
-:109DB000F73932B6FF7D0E8FCB1B57EEE75C8288FA
-:109DC0006FC9E7B2CFE271A39FEDC2E371B8CA7D5C
-:109DD000E873393CFBF691D1FF3EDE11FB0889FBAD
-:109DE000D9C9F5070B755FF73EFBC5BF7F7A9F5951
-:109DF00089FBFC1AD71951BE8675EA0B617DB6D86E
-:109E0000FAE867C72A906F72FC9B28F29B59696237
-:109E10005E12ABF498B9BE989887749DB2B90DE5FF
-:109E2000EB4322CEFD8AA0AB03293F198AFAD62B39
-:109E3000334AF613BF1DD4D286C425F9B3E4FF67B5
-:109E4000738E566019E44014E5D59D830FCDC0C1D3
-:109E5000F73B1E1A8AF20AF8E6C78599E7AF53D294
-:109E60006FDF7A817E918E24FD26AF5FD211BB29F0
-:109E700044099D5D2C4C4F17E3F9F3A097D0F7D11F
-:109E800099BB20B63F20F209E666BE8F9600ADFB77
-:109E90003AC7039437682DF6198B605DD32FFB9872
-:109EA000BEA3C45C75C3518EC07A4D4563FFEFD627
-:109EB0000BFC2907DF4B3D3F59AFBF501EB95C6714
-:109EC000323F94EB51A66C273DDE0F7A3CCF3357DF
-:109ED00088DFFBEB759C0FEF5448AF6F023983723C
-:109EE0004A7ECFF79A126B1B7E2F729781FB53032A
-:109EF000CF9ADC89DF574ACE3717F6C45226ED05D4
-:109F0000FE1D89463BFF7E9290339D770C96DF576E
-:109F1000E2F210E454C2F795EADC89DF571AC05E1A
-:109F200000BB80F433364827EC022EA73BAF74DB2E
-:109F3000038CFCCFFCF7256F310A7D10609115FB77
-:109F4000FE1BD801F45DBB1B8A8AC5F7B582FCF7FE
-:109F50003C84FE9FEC8F4EC9F6DD8478327BA4569C
-:109F6000883F2D33CBC8FDCD806F9B7B19A64D3626
-:109F70003F8ADF47BD9E35BFA51B42F8360DDB4F3C
-:109F8000BFF463FEDDD418BE7DBB2893CB2514320D
-:109F900017A2E3234EDF0C1CA7D311FA237E3F7DCB
-:109FA000538F89E02DF35293E93B6E3DC70D7C3D05
-:109FB0004EBD9ED63387F03F693D1783F7F1789504
-:109FC000CD387E0F84FF78FF23754C0CFF4729BEE8
-:109FD0003B70DE3E3A58C9EDAEF3D6ADB7D179DF6E
-:109FE0007C0B8FCBF953A49DAC4DCAC9423F249F33
-:109FF000FFE6D51C2F6EAEE37944937B1A290EC77A
-:10A000006A785CCD03FFA3DF8711FC6D9AB3CC8027
-:10A01000A8F739FB9E01FD9CD32625C6DFA69BAF82
-:10A02000A378DFCDD30C09BF8F29E1305DFCFEF6AC
-:10A03000F4A4DFC54C864B72DCAE8F1F88FDE6E1D1
-:10A04000EFC5C0339FF17B3739E277CC3614F5C5C5
-:10A05000F7867FC5F8DEC31C8F2E2EBEB7DF10A596
-:10A06000EF3BBC9C3977F342A09BE13F1D49DF7B6E
-:10A07000BF366BDEA3EBA0FCB34D9750F9E5ACEF18
-:10A080002E3E84F55B4AA85CA3FB7806D24169C5E5
-:10A090002D13F1FBF8FB2D7C1C97D5D789BF9BE2D4
-:10A0A0001A3D780CE60FD718A3D4EE86CB1A2FC72B
-:10A0B0007CA81A2B2FBF5EF6FB31541E2CCA635EA0
-:10A0C000BC04CBFB958F67F4171FBCB45409E3EFB6
-:10A0D000A3D5A4F3F693C63C918BFEA29A6A5EBE0A
-:10A0E000D453B57A08D6EB3E99D19F3EF286B0871D
-:10A0F000A47EED15F4FEBC76B40DEF117A6D8A07DF
-:10A10000EF8B782B8FF2EFAA99795E89572B53F159
-:10A11000BB9BD51AF7F38EB7B5E4205FBCC9672C9B
-:10A12000477FBEDD56DC867AF1A0CAAAB178DEE3AD
-:10A13000CD8CF009E8EA10D1D5151F17A62132DB26
-:10A1400012E94AE2ED64494F35897403FCE0F7FCFB
-:10A150001C13E901C67D87F8C75589F2AA8FDF274E
-:10A16000D16D323E0EA817B0443E18C3D390128F63
-:10A170009F5D48AF9C7E3FC2751875BD6E7C5FA425
-:10A18000782EA1449B01F40BB93E745BB231E7AF6A
-:10A190000BFF54A98FF315D8ED59382FAF877E1ACE
-:10A1A000FE989D5C17CCFF05C167255F4F97D22CA9
-:10A1B0007E1F85DB61D2DFD124F6FBDF798429C3E2
-:10A1C00000800000000000001F8B0800000000005D
-:10A1D000000BE53D097894D5B5F79F7FB6249364CD
-:10A1E000929090100893044280244CC222CAE2B09C
-:10A1F00004A32C0E9B8022FE095BC84202E833B602
-:10A20000D80C844D8B6DA8A8A8A80302A2450C0AFF
-:10A21000881AE8B088585163D5D6A5D244ADEC1061
-:10A2200083B6D8FAEA3BE7DC7B33F3FF498AF4BD17
-:10A23000F77D7DDF83DACBFDEF7ECEB9E79C7BCE69
-:10A24000B977D83ECBB9C64C467F7E48636C503850
-:10A25000F385E53196C8DC6B54153E76CAEDE3CD47
-:10A26000C6D2AE315FF5650C3FFD703D63172D8E94
-:10A27000354A346315E15139AC1F6353ECDE076C8A
-:10A2800026C6A6C6CCB630E8671AF3ED894967EC56
-:10A2900085082DDA3510DA997CFB1B15C6E6328F5E
-:10A2A00095C1F76CC5E3C4EF8C056050C616E23F5C
-:10A2B0005DC17EBB415F0CE6B1D0EE08A839F06FFE
-:10A2C0000FEBD129813145D4638679437D0F8B858E
-:10A2D000F2FA37BE53B0FEAA3A05C7E9CA1A92305D
-:10A2E0004D6295946F5D97613D3591B856C69A73EE
-:10A2F0006DFECD388819FE1BC0D8F1C20CFFFD4A97
-:10A30000705EC7159669867A3E25DCBD3595B1BF6E
-:10A3100086C1FAE17B2701872145FF318145B59D43
-:10A320006F959DD7BB3B3C6A33A6D76784AF30455A
-:10A3300063FB143FD6EF140E694E70FE7F3531CDAE
-:10A340000EF3BD5B8575A8B88EE6656618EF0956F5
-:10A350004BF9492E5834C0AF73EB7A7C0AE2C96AD4
-:10A3600052EEF03A604DF8E7FA603AC905008D27E1
-:10A3700070292C21086FE652981DF245222FE1DD4D
-:10A38000C9EAEA8AFD18E15C64B735117CD7E47B41
-:10A390001AEDC1EFACF6114F683F1DD55300AEC9A1
-:10A3A000B16DE10FF3A7F98DAF1AE5FD320EC717B6
-:10A3B000F8B82792F031FE9E11F45D9994A934C249
-:10A3C000BC4615B8288D1DF09E9965135EA6D7650D
-:10A3D00005F1F475BC368BE8CBDC387022E0F6ED85
-:10A3E00081CFE46A507EC2C48AB19E113E25089F87
-:10A3F000816DE1D34A7F06387434FFD722BC6538BB
-:10A40000EE79A5611016C677710AB86BA9889F18F6
-:10A4100067EA881884FBF7302ED0FD142C023C3FED
-:10A4200096A0DD89EDA6316FBE19D61B5BA059340D
-:10A43000070D67C2F92C76F2F9E4AB0EA2CB961D9C
-:10A440008ADF06F5467B7A3F3214F215C72CCC0F13
-:10A45000E52D8CD36DCB46D5EF037A99FFE64B8380
-:10A460006087B12F049DF6DA60622E890FF8AFB7CE
-:10A470003F9CB93283F9BEDB6375F9ECBA2EBAFAA8
-:10A48000FDF6A5E9CA73037D74E5FD8FE5E9F203E6
-:10A490001BAED3D5BFE6A391BAFCB58D37E9EA0F61
-:10A4A000393549971FD67CABAE7E4D18EC9F7E08A0
-:10A4B0006E4F4326C0658EC0D3F5978B74EDCE46A4
-:10A4C0008D3986FB6ACEDAF9E3705F8D60A5BA7EBE
-:10A4D00058ADE573A4CB4AF88BF89CC7BCD101807A
-:10A4E000573E6B3E9A0CF05BE857DC08B7F91B78D7
-:10A4F0003DD96EC1BE45236330F5EBBF9732733053
-:10A500000FFD54FD71D36F8F84948F76169A90FE51
-:10A51000EA5C919D906ED835EC9A1FD476F1EB0EE3
-:10A5200020FE3E50DD36F8B4F84D95F6C1E2E71551
-:10A530003F837E3358CF68CC571C53991FF07F92CE
-:10A54000553E3C14D2BF56FB7F7BA467103EB644F9
-:10A550003D9EC35C7A3C4764EAF11CE9D6E3397A54
-:10A56000B01ECF311E3D9EE30AF4788EF7EAF1DC8F
-:10A5700079BA1ECF499A1ECFC9C57A3C77ABD4E3CE
-:10A58000B97B951E9FA9BE123DFE0CF897FC377D46
-:10A59000CD625DBD563AF0168FC3B467ED4F74FDC2
-:10A5A00096AA6556660AD2830FFE223DF462CC1D40
-:10A5B00000382F043C045C6DE9A0B87EDDAAE47F7E
-:10A5C000810E9A11FF1121F85767466BEDF06B99D8
-:10A5D0004ABC82BCFC8B0BF84878AAF61DA6D37B3C
-:10A5E0007D9D6206BEC1BC85BDBC9141BE6794A77E
-:10A5F000528EA23C320F0ACAA38EF85A1B393A4136
-:10A60000CA9F0EE4A8AB5B900F02403E665CCE335F
-:10A61000B6D684F39821E8FA5038A7CB4B58742D5E
-:10A62000D4833A83615E1FE3BC619C8FC3FB1EC170
-:10A630007D7A2BABB360FF335903A5B35833A51A0A
-:10A640007392DE50C4DC94CE615E4ADFB66BC9A95A
-:10A65000C037CBEC8D8350EFF84BE17B27149CCCBB
-:10A66000F1389C6C877095FCFA7DFC27D4F3A67AB0
-:10A67000D353213FDAEEBAF321F87408E504F2DF90
-:10A680007171345F66F6664FCA6EAF9FE524375E20
-:10A6900053340DF9AE2FC9EEDE0A6BEB9BCCEC49BF
-:10A6A00028E712FD6993003F79A97AF9D247D0C40F
-:10A6B000F35DEA16A39EC4983F16E5C3D58E3B3CD6
-:10A6C000D5732DAE5FD6BFD27AADD6BA4538CFE6B8
-:10A6D00072877B33D0E707021F4FDF620BA851411F
-:10A6E0003AFA2862D6D178C0DB5D11DA0DD8FFF4D2
-:10A6F0006937AEC2BC7228CEB518E677B110E0CD8E
-:10A70000E13F96C35FEB9E004B3CDF4DEB158DF0B8
-:10A71000F772F8C33FB2BDEDCE9FCF6794C2C77F3B
-:10A720002D429B82FD1C3235A4B8111EE68641A441
-:10A73000773AE2A99FF3560E978EE03032A2DB4CB7
-:10A740005CD71C9BCDAD429F23158ED72FE3EE988F
-:10A750005501FF9C6BF2260454DDBC8B10DF65CEE7
-:10A76000C2EE494037E72D62DEF67801775716EEE4
-:10A77000AB8EE65D83FDA31E78AFE2473D90FE40C1
-:10A78000FE655F8CFF7EC8DB4C973E988CFA4BB61B
-:10A79000C9BD198A368643D740EFEF0A783F6181F9
-:10A7A0007C2C7D5F83DF13C379FBC4874DFE1A6861
-:10A7B000EF1DF90AE1E9E9850E5A4F2173597193AA
-:10A7C000CD16FAF39F47FC7D7F23E0C397AAFD14C3
-:10A7D000D771479C29E5039A87D617F51D36F4C72C
-:10A7E000D1BFDCA7939C7C097305DC26330FEDBB3E
-:10A7F000A94CB3E0B8BFBB60F520FFFC9DE027A0EB
-:10A80000DFD3F719CC4FE96D2C40F56F678D947F3E
-:10A810002F22A75B15CC6FE223BD7A227F0D81FB2F
-:10A820003A82BB5DBBA313A797939D11EEEBE37F29
-:10A8300014FD4E14F402FBF551A417D8AF0372D3E4
-:10A8400042F6CD684E2FCCECECF9CFF64D430B978A
-:10A8500017C0181D49B0FE1B040A6FF094929C406B
-:10A860003DAB13C0BFC1A5929E5530A2C98CF3DF8A
-:10A87000F635E7636F2C63913E287F6384CA105FCF
-:10A8800013368C398DED8EB340A701503FFFB27661
-:10A89000241AD63F01F83B706456D015E444885C16
-:10A8A000BA2971DD68D4236EEAA1FF3E96D5AA08C5
-:10A8B000BF71597AB93201E58AAC07E31D4438C447
-:10A8C000B6952FF5A942BEF4617DAE46BE2C367911
-:10A8D0000E131F013A43BA2F32334F7BFBCDD54BBA
-:10A8E000917C8CF4969BC5D82DE32E592FC27AFF0C
-:10A8F0009EAABD83FD2C1EFFE759C88FE11CF5768B
-:10A900007F94A3EFA8EC7E28FFBC1A200EC2F5CBE3
-:10A910006A3BF38082F355B593F2A7AA13293D53FE
-:10A92000EDA2F45C7526955FA876533E2DCDFB070E
-:10A93000ECB768CDD766D4A3568749FCF1792C11C2
-:10A94000F4BB3A8C9FA396442EF9A810C65D420230
-:10A9500010E4755DED18044BC9BEBAA398C277D553
-:10A9600081E5EB1437CAA7B947B455483EF38F3792
-:10A970004E40B633F0C32F13106EE59715A6C1569F
-:10A98000BABFA7E72B1CFF64F5609AD7E96A0FCD21
-:10A99000CB53DF74340EDA9FAD2EA0FC9034EF3928
-:10A9A000ACE7615F5BB1FDF81D4DE66428CFF72889
-:10A9B0001EDCDFC33DCCEF07FC6DB07079B101E464
-:10A9C00005D2CF88EC494FDCC9909F6B7FC1FD3128
-:10A9D0003576767E1CD2D5E04233D69BF63DE85CD8
-:10A9E000A941FABED23E397F4021F89C3F1043F086
-:10A9F00090702A17F83ABFB7EFCD43A0DF03A04706
-:10AA0000AA30BF96CB269A5FCB47E17E54128CEDDD
-:10AA100017EF49EFCC1CB84E686CC37CDFCE0CF04E
-:10AA200010617FFA093C979D7DFEEE44C4CBD9D8D6
-:10AA3000BABF7C827CEF33CEF740E3FDEA31E48B92
-:10AA40005D13DDF743EE8205CE6974AEA98C40B983
-:10AA5000B8D0CA349ED7FA62FE6C38A3F3EBA09D3F
-:10AA6000C923713FE178AE5E41BE96A9B85815D0B2
-:10AA70007DC6CE47D27E0AF3DE5E37F793C7203D10
-:10AA8000EF37F92C20B7CEB3BA0BAF225FDEE270FE
-:10AA90006F6558DF1C8EF57F6EE1F3F26D8573BB39
-:10AAA0000BFBF3131D43B915CBCB5E7CB40BCEFF70
-:10AAB00035D44B20FFDABA08E277AF59DC27AAB0C9
-:10AAC000DD13BCBF677E71CFE7FB307DA03CEF1E7E
-:10AAD00048FBA7C5523F737EB5A00FB607B9CF920A
-:10AAE000803FFEFA6525100670CB5E7F7079128C70
-:10AAF000D76F6393A90BA4B95B941A4CFB762B38E0
-:10AB000086F2F6DA3417E1ABFF8E5415F5C93E5DD7
-:10AB1000FC9F5C4FFA805E4FC85AFFF5C82E2CA8E8
-:10AB20002FF451EACE2C037A58DDEDF779FC9C58CE
-:10AB30004BF3D8533FF9FDDB18AE0334119C77A1DA
-:10AB400095EC14B85C0BE4CFEF4EDF84F68CBD2699
-:10AB5000DF26925F455C5F39EFF53D8A74560EF54E
-:10AB60007D902FCFF5455D07E5E59FF5700345B175
-:10AB70006E4FDE5080F058B8FBA1315DA0DEF9A128
-:10AB8000CC0DA860C57B2E8DC176AC1BE8D6D8CF86
-:10AB9000EE9A845BA1DDCFB3460E44BAF2AA7534B7
-:10ABA0000EABE0E33C22E41E6B04E024081104F544
-:10ABB0007E0E9FF17B6C7DCCC16416C44F45FDB207
-:10ABC00054B4B70CD0EC6E15F74DAA2FA9D211943E
-:10ABD000A320FF6E4B837A4956D1AF73728AF72A4E
-:10ABE000E49F55C833D9DF2356E60B8BE57AB38251
-:10ABF000F2D9CAE5F656E02F557941B90DE396E250
-:10AC0000B856A12F278390CE8579263F62F3936EA5
-:10AC1000F023C737DAD1A4DE323DAE667F23DA7B7C
-:10AC200022B4BB711C69376366B70BF5A215119E80
-:10AC3000AA34D2BB9A53700D205797A6417F0B556B
-:10AC4000D0C3D243F430FB8F93AB2F447896637F0D
-:10AC50003FB6BE91EF2EF9D6C472810E963C64A326
-:10AC6000736A8DB037D408FB564DE4203BF20B7667
-:10AC7000C4547614E4ED30DE436BBF4B22F3889F5F
-:10AC8000D430D62EDC0E001FD080EF04406E68C09A
-:10AC90000F865F6E5639DD371C8E1E80FC9679223A
-:10ACA0005D680730312D449E1AFB01BC6DC6758E60
-:10ACB00060114C0B919B1E1663C5FDCB1CB1FFD2DE
-:10ACC000FA870AFCC9750C15F6BCA12D1F4520DFBB
-:10ACD0005CF26D1EF1CF8ED6B75FACEF37B83E4851
-:10ACE000937A79F7E03C877DE334E33A879927A6A6
-:10ACF000A09E03F37F0DF13CFC1B937EFEDF87EBF0
-:10AD0000F23F761D7729CC67C2FDF9B5D58FFBB32D
-:10AD10001EE81BF773FD822C3FF281BDB01FEC785B
-:10AD2000AE9964253DB75ED849EBE39D645F7ACD6B
-:10AD3000C2F3BE19A27D182339523FA30BB5EF62AF
-:10AD4000AB7C2B1BFBAF8920FE596FF1AF49C3FED3
-:10AD5000EF8D73FB005F2ACA8FFE70DE10FCBBC64E
-:10AD600012B84DC5FEBEB6321C6F7D4C20B902EA4A
-:10AD7000AF5FD085EA7F04AA14DAEF86984C774C4F
-:10AD80007460B9272916F27BFFA192DC589F0B79DA
-:10AD900007F171B207AE9FE8490AEF84698289E63C
-:10ADA000A3B24AFA9ECADB7D62E1F56E15F8FB5844
-:10ADB000E007F639F1016D428419E9D8945EF46D2B
-:10ADC0001AE1DD93A4C07C1E9BD393211FBDB5E483
-:10ADD000C654A29BDA47889F4D173890FD6103FB4C
-:10ADE00020D4A3F99F1973B786213EA71687917DBA
-:10ADF000F4A3E2E5912E683F55530336B41B4FC9C7
-:10AE0000F7849EC74DE91E1AB7BCAE77FA97217436
-:10AE10005D6403BE01FDFF225CFB9EF6EDBE5C2A75
-:10AE2000DF07CACD0FB0AF3E9FD37327D935E6C831
-:10AE300073646036E2F540B39DE1F9A4237AA8413A
-:10AE40003C40BFDD855C277A45FC4F0FE7E71C33AC
-:10AE5000D00BE46BEA7AD339E7290BF32888AF3DAE
-:10AE600036C27FC124BB87EC8FD3C337D9A0FC0E79
-:10AE7000C1CF6AA687D3F79AFD917E9342E727CA8E
-:10AE8000FB7659A85D99D5FFEC36E8A7EC406F92A8
-:10AE9000377BAD62DC57237879942775E5002CEF7A
-:10AEA0004C74F09AC5154DE56FAA8CCAC3031931CD
-:10AEB00000C7B830AD5BFA40A43BC0B303FBE5DF8D
-:10AEC0004F08FA3A01DD22FE7C9591D42F6D7DC8A2
-:10AED0006B35DD36233E352B2F673F51A9FC84D3DC
-:10AEE000933417F2272A93695ED2CE74C26B25BAC7
-:10AEF0003F51A690BEF4C72A35600DB5E34FDA7E08
-:10AF00005F06B4FBE28085EC78337F597A1CBFCFB3
-:10AF10005C5E4EF6C899254BC94F7061E9178336C0
-:10AF2000C07A1A977F9AA285D8A5679641AB90FD03
-:10AF30007C43BA67503AE06776BA762DAEAF22AB63
-:10AF4000711EEAD717AC0D4FE27921A3933614BFD7
-:10AF50005F7CE5E436AE773767A09C5868E67422DC
-:10AF6000E56D85A0C34BE9DA48AC0F709B8572256F
-:10AF700022AB81F3BFA53F8EFF9FA9DFBA57817136
-:10AF80004AC3EB1752AAFA73B09FB34A204A492723
-:10AF9000386AB8AFCE390351087FCDC4F5BCD2EDC5
-:10AFA000FA75E11F7302DACD18D9C14BEB544F1873
-:10AFB000EE03E6B7E2FC4B9935583F35882FE8871A
-:10AFC000F0C51C7F9CF553C043C9B3BDF3F07C5161
-:10AFD0001AB3EF1743A81EB493FB456D9B97EB691B
-:10AFE0003B1FBEBE73621F9C832F16A4971D36792C
-:10AFF000CEA7F12FBCD299C64F10FBE48222E8F510
-:10B00000D9304E576E5817CEF3054E570F4B3EF9B9
-:10B010002CEFA734CE6742BE545AED24BA927C0975
-:10B02000E642FBEBECCE646A27F918F33246F5777B
-:10B03000266DE6FA9B38EFE284A17EC9AFF9389815
-:10B04000477E7EE6B964392EE9DB46796C5CF7EA27
-:10B05000746E9F0239DDF99F9D173313673F31A747
-:10B060007FC87A22AD822FB8132766A37FC1AAEBCF
-:10B07000F742A4F50E8F03FD0CFAEFB2BF07D3F928
-:10B0800079B2BB01CF5DD4E68336DC874F33921BA8
-:10B09000C6793C26DA3DF75C2B5E55614F672E4939
-:10B0A0004F2EAECF13FE3EB64AFCDD990CFCB81411
-:10B0B00061951684E3DE5C2D19E5C605E11FDA1BF8
-:10B0C00003F92CD4A7385E645EE2C34897CB3F9E59
-:10B0D000978CFEA837D2B99FCD08EF6500572CAFEB
-:10B0E000B1C0F9260BCFB9C71EFCB267703D5F55E2
-:10B0F0007B3C7342F2F336E4DA713FCEDF986B2F7C
-:10B100000AC147CDF6FEC75C00F773DBCD6E64EF76
-:10B110003566FF2F504FAFD9AED6211D41B91DE185
-:10B120007DCE71E81DAC376F634C1EEAE1B2FDFCC9
-:10B130000DF99E392178E8BB5D8F97EC3A7DBEDF33
-:10B140003E7DFE3DD441E3AFBE5D6E409FEF7F4C40
-:10B150009F67CD80BD41A80F70BCBD3CD87DCC059C
-:10B1600078EBEE57DDF8A9BB63D2E4F1A8476C5445
-:10B17000DD3DA1BCFB52EF58D42B4E6D9CEB46B489
-:10B1800017ABBE853F059C167F3AE618CAD5B3AC0F
-:10B19000EEF7E3012FF3EAD759CD2E5CB79EDEF729
-:10B1A0009A04FD3EC7ED770BFCFAF2B67C6199B4C8
-:10B1B0007B6486D297910E60DC5B3C30A1B2AAF72B
-:10B1C0001F44BE503C0E081FE8ECDABA7556D4FF97
-:10B1D000AE3C8E8FEB970E8F0BE1513898975D57F1
-:10B1E000358A7D01FB8EAD7D6F0CCEBBF0E70AE9A1
-:10B1F0001F852FF53A82F4D5B46BC64D94DE5240CC
-:10B20000EB9776C2F9F54A2012F2CEC1AE7D8DD011
-:10B210006EAE9FDB3B8A56D882FC90A19FCC308FCC
-:10B22000F521E530FFF9FB0E7EA740FFC51BF5EDCC
-:10B2300016009F46F953B2E5075BE877791EBDAE6D
-:10B240007E938AEB9E2BE62FE527F30D273FC575EE
-:10B25000BC09FB12FF0FE44E698216DF233E28472C
-:10B26000AF5BCFDB03DB2DC475973BAC2E5C77B9AE
-:10B270009D0522603EC722AD1E277CBFB42192EC03
-:10B2800074F36CA0AFE651CA308E011831F9CBBE11
-:10B290007A5725BDA73C8EE3BDFC2985CE69E568BC
-:10B2A0005CC5FCD33CBF8005683D482F9ED075FA35
-:10B2B000F57956CBCF7765E6C041844B096BE4E75F
-:10B2C00033C0A727C4DF5D06EBFC2816F537437BA8
-:10B2D000E6D6C88FE7E0FA58C5BE1F6CA1E5F29C20
-:10B2E00029CFC1D27EFC5486371CC7B108BD79FD79
-:10B2F0007D9E0C9CEF4A8B2703E1E05B1746E7FD40
-:10B300005B3771F9B53E06F4D84EA43F933E7EAB51
-:10B31000C2F5733683F3C321A61703286F9A1F8AD9
-:10B32000716F76517D9263EB1FE8CDF5FF7FA8A486
-:10B330000F35AFE37111EB7339FCD63F90CDF57F3C
-:10B3400029F7E219F5D756DFF664A01D823DC8E75C
-:10B35000F5092E2944BF8EE8AC4D467CCBF549BD9E
-:10B360009C15FF387FC65611A7D1BC2ECC8FFE8C02
-:10B370002F15EF5153887E3BA707971383467AB664
-:10B38000897AE4F798639A78FFF530AF390F9B5CC0
-:10B39000687F6B85B7C79381F2F3CB756179486796
-:10B3A0008346727BD4895CCEF72306308F1FD2721E
-:10B3B000D16F790F932E4D0C07FA837EBECCE7F642
-:10B3C000F0C8015EB2036E7571BE6F5CC73DA29F8F
-:10B3D0003956EF6F87B5331F0917369AEB1D5F2E6D
-:10B3E0005236F37901BE213FE85761643FFC52C8F1
-:10B3F00025095FA01B8A7B907C2BA6955EFCCF86DF
-:10B4000001BDACB3703A90E7B6107A11F8EF46F888
-:10B41000BD55E0973D1026E8C5C4FE8670CC777216
-:10B420007AB8CAF317E07B5D8F816DCF6112DFCCF4
-:10B43000EC1FF8CFFC2EE52F3FBFD7077A46C90B8C
-:10B440000F4531A877DA5C9BE086F6655B57467955
-:10B45000203D65F6453961FCD37EB5C0DF0EBCDF0B
-:10B460004578F3739C4309F1939E79EEE713709D41
-:10B470007FD96A71224BA8D86EA3F3D8C2DD0B48DE
-:10B480005F877C13CFAFFE1AFDA615FBF4F6F99289
-:10B49000671E4A7011BC7DC9A6444C03C90CD285F5
-:10B4A0005B2CAD7E641806F4EFE655383F637B9C59
-:10B4B000C765C077459D5A688D6E5B5E21F84BC5A8
-:10B4C000EE9F7F8D76C38ADD379E447E5F61F00BF1
-:10B4D000140BFF88D12FF09B1E7ABF33C087E20C7C
-:10B4E0007C30AF9E442EDCAE5CF3EC23394DA83F9C
-:10B4F0006C792B4AC90AFA07A4DFA4A56EF653AFEC
-:10B50000BA3ADE9717847D388837CEBF5CFB140CBF
-:10B510005682833F4FCB2C81A82178DEDB6421FD4E
-:10B52000B7ECF9A7B73D8674F6B18DE47BE9F3AFCC
-:10B53000FFFE3AD49F77593A8DE3CB7028217139B9
-:10B54000152E6E8F93F82979E975AB2B9B7F5F1AC7
-:10B550001BC453E9AE83568C0F32C27354DD416B6A
-:10B56000A3A31D7CD5358D213BD4B37FB5E2FE3836
-:10B570007D40619D53DBB62FDEF47A14EA6708271D
-:10B58000944F126FAD7834D487FE27BC3A80EA39E5
-:10B59000F19C72253C3ED58371BEF272248B817979
-:10B5A000147F62F38F43FCEE5C1285EB3969AEE4E5
-:10B5B00074FFC4CA04D4F78A2DBE0427A5FC7BF10E
-:10B5C0009377113DCE572A139C5944EF4926D22533
-:10B5D0007C49B8CEB91BA7D23AE7318DE8B1F8095A
-:10B5E000D5EB87F45B332BD8D5CEBE19DB93F3A90B
-:10B5F000939B01B9B0CE93223ECBF73B559CA3174A
-:10B60000913CBF4BAC99B1C594FF56E873DD7AB657
-:10B61000FABFEDA1E7D08A2DAB1B104F67BA793A7C
-:10B62000E33C010E3E0137E507E8577D2FBF33C7E6
-:10B63000137361FC02B503B93A0ABF63FD068B07B9
-:10B64000EDEC21EDC439918F7FA7181FE61D8EE721
-:10B65000E09309EDC77FFDA4A7E40BAC2134FEAB5A
-:10B66000433EB0E53EA2AF6F3EE07C66A17F620143
-:10B67000953758029DB1DC7F708A427CC2C602EDCC
-:10B68000EDF32D16B1CFF5E5304FB3120ADF035CB1
-:10B690003F95F4320FF4B240889E10A41F6BF03B2C
-:10B6A000ADFF57623D8DE4CF937EC0F9823F18D73E
-:10B6B0006FE417F93D0D714AA23DDBD8BEFF29C8E2
-:10B6C000277C346E19C877D447CA3EB6911E51F60E
-:10B6D000BCC58B703ABBE3F0EF6FC5F36D9DDCD753
-:10B6E0007A3E6CDCD7C52F0E6C775F9F5D9BDBFECF
-:10B6F000BE86EFEDEEEBB50AF1BBFF2E1F06C94784
-:10B7000076892BEDDFF91DF0E14A035CBF6559D165
-:10B7100043B0D059D89DF06480AF84AB91AF5A91BB
-:10B7200049B6C35719867484C053C251D22B631AC9
-:10B730008DD34AD7926E255DB7D2AD71DD7A781A76
-:10B74000CBF310F7301FEF2B16D217CAEA797C2201
-:10B75000B4A378BA0AB4CF53EDDAA3C99D42F37EFD
-:10B7600043BECE50DF63C87B0DF53543BE5257BF95
-:10B770006CDF612B3F3F0474F56C5563E93CD25696
-:10B78000CFF073BFD3EEAFAD3EA48FAECD56E493F2
-:10B7900096E5CC1709ED9BF7ABA4F75C743547A190
-:10B7A000DEB2328CEB75179D221FC3F3CDF1D65557
-:10B7B000C827E5F7E6306E87B9E86D8E8A0939CF7C
-:10B7C00037D5AB5168FF6DF4B382F6E35B6A683F2F
-:10B7D00035B28ECAB97E77319CDB1B2E86737B43D4
-:10B7E000BEEA48A9423B6C2D8F239CB36C5A14C50A
-:10B7F00061D4A7DF3C1DBECF7D93C20C308ECE8CB2
-:10B80000F10FB3392AD929E6A378C2D9F53C0E62E3
-:10B81000CE5A3D9EE739B650BCDCB76C29A5F3D6AD
-:10B82000EBE3174AD85AA2B3E28D86EFF563699F1E
-:10B830009418F68926ECC3C67DF2A1DC27B92C57F3
-:10B84000172729F879BE9A75F374C0C7C5632AB360
-:10B8500041BEA55E65AB06F0B858F43FE18104F740
-:10B86000DF42D8AFA83749789DC37DD4AB63FDE5EF
-:10B87000DC9ECF06FD14E966EFA7398F437A6EEFA1
-:10B88000C719AF61FEE53FA47CCADAD61F75E0BBDD
-:10B8900059C8A72F1EB031A4F78B07DE48417BE4BF
-:10B8A000C5576D74CEBEB8DCC6EDDC0722FD28623C
-:10B8B0002E76E37A71CDFEBFE634925C5EC1E5621E
-:10B8C0008695F0DC52FFF713684F6FA9875521DF8B
-:10B8D0003F1041FBA9E2D530B2335FDCFFD741A175
-:10B8E000F6B9FFEE7AA4FFFD62249BFE22D2710C12
-:10B8F0003F1754BC76EDD3E85F2EDF7DD03A1BCAEC
-:10B9000047FDE63F7390AF5E7C91EB53172C8D4F54
-:10B91000A28D3322E3D2AF2C4968E783CEBA30B68A
-:10B9200025A3FF645F567B70E170B80870C0750195
-:10B930005C8A511E74048FB47F5B787C3D8BF3B7B7
-:10B940006B18FAA38370513CFC7BA4DFAED0FAF9EC
-:10B95000F7037FCD41FE73A5F57A70BD03FFFFAC01
-:10B9600077D6BFED7A39BD7F85F235BE2DDDB7A51F
-:10B97000EB97FF83F23B23DD34DF1FB9DF7FF6FF58
-:10B980008CBE37FEDBAEF74AF87E53E03BD289FE31
-:10B99000CC8BFBFF33855DC5BA5FFB3FBA6EA9C791
-:10B9A0008F54DDC772A1FE5BACEE03772A6923EDED
-:10B9B000EA21A7321479BEA3F3D328C6E5F4287B85
-:10B9C00029E99FA3BA3E40FA720DCB23FF85AFABA6
-:10B9D0004A7E1D0A020138BC91984BF7AC9839D0C9
-:10B9E0007509E447269753BC98F15C392A7C7C01A1
-:10B9F000EAA78797C1BCA09FC3912627FAA84777DB
-:10BA00005503B61C4A9B303D9A3296E2FE473BF402
-:10BA1000E7ABB18673D28D2E7D79017BB113FAED40
-:10BA20000AB22C74BF620CD60F39571ECD70D23AB1
-:10BA30006F64B52B9C8EAB8753622F7ECE6C0B87C9
-:10BA40007F0EB7367012E768B3A86F849BD9717FF9
-:10BA500003B633333817F3F5D2795A9E8BAF044FC0
-:10BA600026CEDB6631B484AFB92BF7CF86F44B70AA
-:10BA70009170BF5A784B3C19E12EE12BE166C4C3AB
-:10BA8000D90C26CEB71CFE5DCDB966DC77C3845ECB
-:10BA90003FDA1CC3F35D1B542FED473FE16DD437F4
-:10BAA0006E33EAF5231C3114476ABCBF5034386644
-:10BAB0009002EB4D36339F0DCEA1E87B23BBEB7D8F
-:10BAC00066FFF2541C87DB77BB99B9FD1A76B72F56
-:10BAD0003C8FEA7BAC902F7C703EF340FDC264E665
-:10BAE00056787D161D4BE1714CC5383148B15D610A
-:10BAF00034EFB7B033F32FE7F824BCA0D907ED1B20
-:10BB0000D0AFC714CBDB47E5517B9F89B7F79821AE
-:10BB1000ED9ECEE3149A5772BB7CE1EA6E19C83FE2
-:10BB2000C68DD4DB996B7B717FA44CBFEFC5F7BB8F
-:10BB30006A7227D27D8A15BDE97CA4867BCBF7A0EB
-:10BB40009D7E278FD3295C75FBF88138BF9D716E70
-:10BB50009CDE9909BB06F1FA33EEFA10BE6BDBC32B
-:10BB6000E8BB2B531BDB0BE30114D7AC3DF0A16802
-:10BB7000EA616B220CA1D54D3C8F76C209BE5DEF08
-:10BB8000A07F72C21495EA4F603C0E93AD88A03836
-:10BB9000CCF1BEAFCD89D0DF78387460795398335B
-:10BBA0006511CCBF50D887A7897863359C692F3A37
-:10BBB000705EDD32D2E0FB78D67E7CF243627FA9F4
-:10BBC00023958DE867EA3E8ADBEF657DEC07FB7D18
-:10BBD000BC17B747158954E601AE547FCE1A5B53A4
-:10BBE0003A9E7FD65802BD20FDB0F7C879BDA07C33
-:10BBF0005C1A1BB301E17E8FCA36D37C9B0BC9AFA5
-:10BC00001099E9423C6840D2E45FA94D75A15DAC52
-:10BC100069445D00FD094D8FA6BA6B5C84658A0797
-:10BC200092E7ADA611811E68C76FCEE57E8913CE5F
-:10BC3000C6483C2FCE76D8F9FD4911573457DCA3BE
-:10BC4000E95ED3F8C035780E7D48257FCDDC87F8D6
-:10BC5000FDB03F3BEC7E05CF6DEBF93E656BF571BA
-:10BC600044CCE9263BD0ECDA11563C6FCE7178AC6F
-:10BC7000B84E7FA6B602D725EF23F641244097851C
-:10BC8000B58514AFA246C1BEC37D627645E139D801
-:10BC900018875421E28E64FE17E1DA03D85F51B4AD
-:10BCA0006B27D2CBE755E9641F3D2EE86E1CC655C5
-:10BCB000A23FC3DC9884F3198EDF11AEB1CE0C071E
-:10BCC000D17318433834599C1948DF4D2BC34CE8C5
-:10BCD000971BB79CD335EC33BB19DADF6766E1E815
-:10BCE00067B84DB49FB9CCECDD04F9AE76668E8CA6
-:10BCF00045BACA25BA4EECA315E17C4EDDCB06232E
-:10BD00003DCC5EBB8EFC31922E98B961741C8C7355
-:10BD10006A6B6A1EF2CD563EDD67E4965EA1F43092
-:10BD200045213A80F4603AD1C3A46791EEC78D0CE7
-:10BD3000F4589C85E7D132E641F99EC8DCA827B4C7
-:10BD4000B066F257B638AC2EB47F497E22F986BC75
-:10BD50002F2BE9601BC87BB385B1EDD5764A9FAB2D
-:10BD60007632734FC6765427527E67B58BD2BAEAC5
-:10BD70004CFAFE62B59BF2BBAB07537E6FB587F200
-:10BD8000FBAA0B287DB5DA4BDF255F02B8101F92A6
-:10BD90007C45F2A3D90E6B13FA2F255F32D2CD2C3E
-:10BDA00000EFF03C6A4F7C4FF23B5C87292FC88F35
-:10BDB000247ED314AF2F3115F958E30CC47FBE7A1B
-:10BDC000EEF997F15C5EEC70D3399D71BED702F449
-:10BDD0008A7049B1B27D6897AD59E4695A9D1A8459
-:10BDE000FF6DC50A3387D0D5ED9561CC1C2237EEA7
-:10BDF000A88AD1E56756BDFF7A67DC0FF1DA67885C
-:10BE000097133FFBEA893FC0F7A77E76A627E21B80
-:10BE1000E6B1F5111C776978EB3C6231BFC2427E16
-:10BE2000AEEEC27ED25DD84FF04FE87DE6A77EF63B
-:10BE300037DAE74D553617EAC59F20BE00BE7F149E
-:10BE4000F82AAAB2111C0B577EF1FCCBB8DF975A27
-:10BE500089DF15AD10FBD1700FFAF324467609D0B7
-:10BE6000AA299EFDF37BAD8108E8FF7385EF63058A
-:10BE7000948399187FB8E68D8F900F2855C7C8FF17
-:10BE8000AEE1BD3D9C9FCF724E77AFBAEA28D56335
-:10BE90008D5D63D0CF23EF25470CF0585DB07EA4B5
-:10BEA0006DC45F51E62196847E965AC589AADF1C2F
-:10BEB000F17DCE1A85FC9A18C73305EF9167AAB4B5
-:10BEC000AF46F432135E9FC2187CD2EF6A494E49E6
-:10BED000BA9DB316DAE1FEA8CDB5CE0BE1C745E2B7
-:10BEE000FBEC4C13A5F27B02F60BFD7559933B1D41
-:10BEF000F58A2E589E8569DE74846F17C718B312B1
-:10BF00004207CE4CB398071FFF29442EFCEFFECC0E
-:10BF100034EBDC2CBA0F48724C8E539499B70AE379
-:10BF20004B8BD68E402ECC6A2CEEC44E502FA9B52A
-:10BF30001F711FDBCEE3A8CB3A9023D2AE760AFF67
-:10BF4000792DAD9BECBE253B7FBD13EF17947C6A2A
-:10BF500023FC96F413715B59FE4193C900A9B7679E
-:10BF60008FFEF56751E4A7D8CDE33B21E576D6A552
-:10BF7000C5DC2EEB86FDD58EBFE8C8CE4FA3DAB563
-:10BF800063EF567F941DBB42F93E0AF508B99EFC4B
-:10BF9000FDDF26D03C94CBE427AAD8BF32A1BD3820
-:10BFA0002FA31DBBD5DE2DEC7A154B0BDAB5771B15
-:10BFB000ED77E3330DFE0333A37B66D27EC7D4ACAB
-:10BFC00068F4037C2BEE9F7474CE91F6EF8A0DD04B
-:10BFD000491CEC57B32B1AFD5B173BD0AF1FCAE4CB
-:10BFE000F2FFBCB0975FDCA1D2B9E7E28E48DA5726
-:10BFF0000B773C7814FD8E0BB728348D72D640F049
-:10C0000003B8327BA85CC338B6B8B6F36EF1F78CD0
-:10C0100046B952FAEBC84AA4B705758A672BCCA774
-:10C02000C5EE8A8E0F99CFA24CBE6F4A6D758308FC
-:10C03000DE62FEF3335D4457B2DE82FA07C9BE0CFE
-:10C04000F52E905EF44204E3F7539ADFC1799EDD4A
-:10C05000D8DF8DFEC20575BB16925EB123C289760C
-:10C060008533226E59F673AF18EFDE4CAEE79D159F
-:10C07000FEA3B33BF93B00384FDC6767146E87962D
-:10C08000ED6AC4BEA8C9E47A5606C2203E587F4174
-:10C090005D53540FA87F72DFFB943E20C659E068C1
-:10C0A000C841797C727704F9BF4EEE7E7CCC6B3050
-:10C0B000DEF9BA119D705FC8FE1FCFB4707C6C545E
-:10C0C0000B105ECCCFE366CA11BEFD43E719B7C9BA
-:10C0D000971ABAFF78FCD0D9DD2F4599B282F82C97
-:10C0E000B757DA934CB88F167991BEA39178A07F99
-:10C0F000EBEE893E946115F5B90CE99AF65F12D51D
-:10C100005F630AA967B3B829CED4B2AFD0C3EF99A1
-:10C11000887B51228E3F5FCD22BFE2AC7EAE69B7F5
-:10C12000219F7CCB42F858DCDB350DF9D3A5069571
-:10C13000E13C17A7B200EA274BEE89DC84724CCEB3
-:10C140007B567FCE0FCAD628CC03EB2BF3AB4C83A8
-:10C15000B40BE0DF87F494D83810E3249B52B95E27
-:10C1600021E3471F2B3679AC20075FCF8C157C5617
-:10C170007B742EFACF2665D279EE8495F954B42BD0
-:10C18000BDC8E34BCBD2785CF363221EBE2C369045
-:10C190001107FD9D13F82D9B14C8C0B88BB21793DF
-:10C1A00028EEE29C95FB3DF13BFA59CBF2A0BD8312
-:10C1B000DED9D064FB98107A2A2B72BBB09E1AEBA2
-:10C1C00076E53A70BECE0BA4E7EE8964A8E79A5EE6
-:10C1D0008EE47153CF846DB685E0EDE34CAE47CB72
-:10C1E000F73BD8AD3CCEE8610B8F4B7D786B92DF8F
-:10C1F0001F02AF872DDA0C8403AE03F5FB05D6DAF8
-:10C200000CD47FE57C1744D5D23CCF097A5F105E11
-:10C21000CBE3B9C57D60AC8FF9261187DEFCAC8D10
-:10C22000E280CE2435ECC5F1CF3CDB9BE1FA9B529A
-:10C23000FDF3F65139E89780CF92E76C015CCFE9C6
-:10C2400067B93DFAB485EB6BA72726BA10BF0593F3
-:10C2500036CC227BCD169B8276BED30AB32662F9FA
-:10C26000D6788A3F2FA9AEA2F8ED12601B787F081E
-:10C27000D202BC07747A6B6F8A373B8DEF3628F495
-:10C280007D0D7ED758EDAC9F203CB6F3F3D599E7F2
-:10C29000FEDE3B34DE5BA6255BF4F175924E64F95D
-:10C2A000DF047FFB9BD8E7FFC8E4F688F288BA87F3
-:10C2B000D3689D1CEE8027FE8E0D6B8C7C7C00C6A7
-:10C2C00053F454908F3CC602198FA3DD613B3F7F2E
-:10C2D0009DD961A1B8F59297233D14C7B6FA1A13F8
-:10C2E000C553A85C4F2F3101F820557EB69DE2CB97
-:10C2F0003A3D17966723FD9CD139B779AB2AC661C1
-:10C300000CEF539EDEC6E38EC7A12E49E5D9547EBD
-:10C310005AE44FEFCD26BD0FFAF7E0FDAA929FFC3D
-:10C3200094C37172F171AE77D989DF96B5FA7986C7
-:10C3300046A31C2C5F3D241AEF2BB27755867A8BCF
-:10C34000114E97CCEECEC867C7F7E6FCAC74EF137E
-:10C35000E49F2A15F7084A9F53B81F1AF621DEE713
-:10C360002C5D35E411A2CF772CAC27ACE75CDD83E4
-:10C3700051A1F8B8A637E773ADF5AD6EAA5F0AF51F
-:10C38000B19FD2556F45D17CB659285EC588C71F6D
-:10C39000DDFE39F547B56FA58F3A6E6769B37ED676
-:10C3A000F01F9F42FFDFEC0873FBE86B1DDD833B52
-:10C3B0006BA99B87EB3FFB7C18F1ADB3319C3F9C95
-:10C3C000047EEAEB85F318FB4B8AEFFADD64BABF13
-:10C3D00037DFAFEF578E3BB437E7E3E571EE688C9C
-:10C3E000172C7F97F341C0CBCDD4FE5D0BB537AE94
-:10C3F0002359B46BDD9FCF47103D9CEDC2F172769F
-:10C40000672F924F4D319CCE61BE2978DFEFECF360
-:10C41000BD72E91E1D2A3D400F25E2FC7B36A62E8B
-:10C42000C51952DE6411E7B800D444BAC136C0DF82
-:10C430004BAAB8BE556A5F4BF12518AF3B288FD287
-:10C44000802DB66DDC2DD02B9D2F1FEC2DEC983858
-:10C450005E828813273DA8CE8A7C5B13FA62D90ED0
-:10C4600063DC2E2F5F2CDBC36C3BC93861A4439F78
-:10C4700042712AA52B162DA0F8FBCA75B7E13E9391
-:10C48000F32F35B3023CA735292ACDA3298CDD3102
-:10C4900009F5CAD07142F4B97B83E3306702E9B190
-:10C4A000A4F42FEBEDA2EF98AFC57BAD2B94B53480
-:10C4B0004EAA3CEFF27549380138AC1827D83442FF
-:10C4C0009477B06E394FE3BA5BF5AEDE9CEF37A5DB
-:10C4D000BA7E3914F1FCB64AF77F2F7DDF3F3AB6BA
-:10C4E0001D3D2D28E7ADC1785998FFE6DE8CFA99FD
-:10C4F000D79BF3B5528CC78579666CD4C78B676EB2
-:10C50000D1E7FBECD0E7B376EBF339F5FABCFB8867
-:10C510003E7FBF1817CFE178DF18CFE198E239DC12
-:10C5200065E3E770CCE3391C533C87E3773C8763D2
-:10C530001ECFE198C77338E625BCF13C8E793C8F5D
-:10C5400063F9FBBD39DF2E13F1968807A477F64A0D
-:10C5500098EE3ED2C5FDFC7E09D001DF3733ACB486
-:10C560006F1EC31A741EE176A72E93ED2E8C1F5EEC
-:10C570001BA7EDEF1D8FF7501A562521DECC8D1429
-:10C58000C75AF12A8F632DCB0B73A0FDA371E5C9A8
-:10C5900055181EAAC56987B0FE454BF336846F79DE
-:10C5A000D561BAAFDFB8CCF5EEF51C7F648761C505
-:10C5B000B1A44715A29C8BED188FC67872B6561F92
-:10C5C0003F6E8C2737C6911BE940EA7F4F599A93FB
-:10C5D00090AF7FF1AC7D2DCEFF8B30711F66BADD41
-:10C5E000100FE0207EB2F8016533CAEB2F7A733D5D
-:10C5F000AAE518E8EBEDC85999CEBEDC9FF4F2D657
-:10C60000FC5AC544F1E99A87E4D01231A714A5B9C0
-:10C610006935F2B90526929B97405F237DF003951B
-:10C62000F4077C572B743DF8AE56287DE1BB5AFACF
-:10C63000FB125D74F5F15D2DFD7D893EFAF8FC2954
-:10C64000CB0EE2B97FF2DAFEBA7A73BC430C7014F7
-:10C65000F316FAEC1C901F1ED42F976E4841FC2E47
-:10C6600059D0D2B41AF0BB644F981BCB8BF1FF802A
-:10C670002F16439F78EFB278B7B8BF5CA597C3B3C6
-:10C68000851C2A36339F33364887C54EE68981F6A6
-:10C690000BFA34E4E0FB590BDE7C7F90330DCF19AD
-:10C6A000233A233F4AB17828AEB66C57CF9865D06D
-:10C6B000EF373DB4D83E80972F6B0FFF6226CAC379
-:10C6C0005DFCFCF7C5DA97A228BE4CD05B8AC51981
-:10C6D0008E78DF54CBE3EBD07EA6C606E962536DBD
-:10C6E0005C780F4770BD413AF89EF004F8E1769E01
-:10C6F000E243E41769A913EB1DA1F850CF96EB9321
-:10C70000EF6EB115BC9F3B45FE4B71DE90EB3CD705
-:10C71000FB608E0BEF7554EF4B51919F9B766CC372
-:10C7200073C83F6C5A769F788C07EDF9077C87AD0C
-:10C73000E443BE9E3FAF1F15752DEA9FCF5BDCE340
-:10C7400020BFBAF6692B9E2B4ACC7E2BC5673EBB19
-:10C75000C98AF1CA376CDF44DFE76D2FA478CCF9C2
-:10C76000AC92CEA3A7E43B09021EC523958D4E983B
-:10C77000F7837D389F2D0EE7FE3DD08F5EC7774A49
-:10C780002E6D577231CE678A7797B510BE8FE9C389
-:10C79000F98C719FB41C9F9C1F4FF0E0F7403E64E2
-:10C7A00070BA4F6FBB2F265F4EA57D31E5725F3AA1
-:10C7B000A74D0DF4E6E7E12CC379F8B8CAED79F599
-:10C7C0007C1F145B039D26E33E3960213DB7DCCC22
-:10C7D000DF792A877F5F07A977A8AAA3D78AD11113
-:10C7E0003A7A9ECE6275F7696EC1A09290FC947100
-:10C7F000E9BAFAD3A6F435D07F5EB09CF8C875BA12
-:10C800007B7FE54B7D2E85F4CC91FAEF8CC71732F8
-:10C810007693AE7D399B14AC87F4BD45E1E79EDD90
-:10C82000319BD10E586CE2E7A7E91AFFBE701FFFDB
-:10C83000CEA633DD3EEC9EEEFE03978B16F21B4830
-:10C840007BFB74FC773BF0672CBCF51E3BDEE347BB
-:10C85000FB84EE7EB7F017E2BC110FE5C29E549E3A
-:10C86000C9ED49E5BE062BBE9300F037C7C5523D62
-:10C870007B1CC655D62A646FC47429C559EAE3B433
-:10C88000B03F8C7F5C784C2DC47D622C2FC6778A9C
-:10C8900010BFAFF2B8D48568178A6AFB3EDA42B49B
-:10C8A00013A17DCBF01EDA877D5CC26FE75FD505F3
-:10C8B000E1384EC9A57B9B3B0E5A313E6FCA949816
-:10C8C0005CDC3F463A93FC1DF635C515B61C3F4C63
-:10C8D00074D6526C263ABE123C167AB89DD5487F63
-:10C8E000F3588315EFA7CCDBADB8F15C8AF5102EB9
-:10C8F0005D902E0D70898B6D0B0F09A756B819CA64
-:10C90000E7330EAFF9FB143FF2C7367012F033CEA7
-:10C91000BF23F8C975CDD3B431C827E4FAE6E33AAA
-:10C92000701C58078E23FD166CB071BFA693FD6A6C
-:10C93000A197C7D91AE963D2656E97B9E5B299D2C2
-:10C9400029E3F4FB13DBE13E997A3981CAAF967E85
-:10C9500016C23C512E5C2DDDC8F5487E1CDC27FC40
-:10C960005EC295DE3932DA279BFA88FB1003D94084
-:10C970005D7CB3E0B7C6F6C6F866A91F18E54E6140
-:10C98000A489E22D5B1C69A47748FEAB09B9A2AD6E
-:10C99000FC96EA69508FCFC6A393439AB0132E8EAC
-:10C9A0004CA377245296C52520BE0AC39C14D75F9A
-:10C9B000B84CA538EA42A8E70AD15B56AD484F41CA
-:10C9C00039F2F97DBD9EF4813EFFF93D9D1206C30B
-:10C9D000385FACB474B2BB82F53E5F999F82F11DA3
-:10C9E0005FACB34DF7B703AF88BEE23ED3CF3E2274
-:10C9F0003977DE743C6A3AB42F5BB9270AAF0F94DB
-:10CA0000AEE4F2FDE11E5A78DF8128E7376D73222C
-:10CA1000FC9C9B72D04E9C8436DFF8A05E51B232F3
-:10CA2000BF33EA1D65FF38FCA413EF852FB324A0A4
-:10CA30005E7AFA0390930AC939D2274E854117E4EA
-:10CA4000878BA4F7CF4E29CC83FEA873A6837F598A
-:10CA50008DE7C5DCBA8C8082CE532DA92FDA5557CD
-:10CA60003E4DFA4CC9FDCB32F01D426D59CFE8F670
-:10CA7000EC2932DD26E439EAF598A25E8FF135A87B
-:10CA8000D7631EF57A4C51AFC7EF151BF47A619A44
-:10CA9000F06F49BB73F79AE65CF4FBF946B2CC4AF7
-:10CAA00092C30E7A17788912EE46FEB4047528CC2C
-:10CAB0007F16417607F6C18D3A3CCB7783E5BBC044
-:10CAC000C39A41570BD927D75FB6B3D07BBA235847
-:10CAD0008C2E3FCA9EA4AB9FEF4CD595DF90D85BC0
-:10CAE000577EA32B57971F9B79ADAEFE78F7085D55
-:10CAF000FEE6C137EAEA4FF44CD4E52717CCD0D58F
-:10CB00009FEA2DD4954F9BBE40573E435BA4CBDF9D
-:10CB1000567C8FAEFEED95CB74E5F29DE47A3C8FAA
-:10CB2000D9F0FD173BA5F2BDE4BB5546EFB10D1D95
-:10CB300065E276461B97474BDEEEE908A583D97D73
-:10CB4000B91E7430CB330BE955BE8729DFB95CD4ED
-:10CB500097E3359905147E1E6E48423A36D63396D1
-:10CB60000F8D3874C905B8FCA4EFDB53CDC02F86F8
-:10CB70005E73A87F3AE4D3B2E26EA1FC90432FA586
-:10CB800039F15C3AE31633F0ABA1FD0E5DC2F2DD84
-:10CB900059893C3F99916A3268C7BEA9182F3BF466
-:10CBA000FAB4B56E6E4769F7BEBB4C111E784F1CC8
-:10CBB000E1816900E818D34340C7981E013A9E639B
-:10CBC00061EC28D031A6C7E07C8ADF7F0BE7534CAD
-:10CBD0008FC3F914D377E05C8A69039C4B31FD5D08
-:10CBE000F5744A3FA8D6A8DDEFAB8B29FDA8BA9211
-:10CBF000BE7F525D45E91FAB7DF4FD81BE8A90E3A7
-:10CC000001DD7BA31DBD2B2AFD9CD2AF5953C91A50
-:10CC100023906F349A63BEB207FD951DDB09CCECFF
-:10CC2000AB107D2D5BF16CE84BE37775121F17DFBE
-:10CC30005DA9DA1388E70F5327F7ECAFA21CAB7C92
-:10CC40001D436D3E34B5FF7EE422411FEBB33C9B98
-:10CC5000B1DD303BBF9F3CCCCEEF1F0F3337D4202C
-:10CC60007DD57CC75C18FF733092BFFB51739FD991
-:10CC70008F7650E532DFE7C33B31CAD77CD748F720
-:10CC8000958739DD8928AF64BED5EF8F7F42E27C7E
-:10CC9000A41F5EC6F78CBEDC300AF585E10EAB0B37
-:10CCA000F94868DC00FADB0F467E25E7C3703CE9F3
-:10CCB000DFDFF21D0B9872827EFC61F68654B41B96
-:10CCC0000CBFD3EE0E8D5B92FE7AE572A38A765589
-:10CCD000199F24C791F38D34437F79C1F8A361CEA6
-:10CCE000BA5CF477D4943BA8BFCEF0DD9A47F53C0C
-:10CCF0002AB5ABCB45BBDCF03207C5C1CA3881CE03
-:10CD000062DD508FD639FAB2467112C3459C04F6E3
-:10CD100063E7E53EEC6778A74012C6810DAFE4EF0C
-:10CD2000903DA1F0F7E865DC02D68F08D9B7384FFF
-:10CD3000ECB7C7DF60BEA847793C04DFC9F25CE707
-:10CD40001279E977B48F24FBD628C16B1E4ED5BE6D
-:10CD5000403AF2DA9C9F45D0FE4EEF8676D3894268
-:10CD6000AFFF27F4720ADBFDF7E9C5C3F1DD95914A
-:10CD7000BDCD4837122F12CF1DD191C47B489C19CD
-:10CD8000E1B9356E4CF463A4AF8EE84AD2D3303BA0
-:10CD9000C73BE215E3D4241D2997F9BB6EC3CBEC46
-:10CDA00024EF241D19E9A02D1D71BAACB9CB4EFD9D
-:10CDB000B5A5A320FE111EFF3A1D35AAE8BFBA5A39
-:10CDC000FAB9A3998D8986A26969DA22C46FE165EF
-:10CDD000D751CCCF6623C62049C9720DCB07B62DDB
-:10CDE000D7BE69B64487D0D9304167AB3BA82FEB9B
-:10CDF000C9772F64FFCF7430FE5B426F782B4CC62F
-:10CE0000A9781CB9838271A34BF2397D15A4AAA419
-:10CE1000778CCAE2EF9F3307D7B35DF017F9F14D76
-:10CE20004C3B129D8AEF947AE97DD2319D0CEF93B1
-:10CE30000AFDBCC0E0E7BF29EB06D2CF6FBAC23B08
-:10CE4000D7E3B3847E9DCA52AFF21DD2295964D76D
-:10CE5000FEB1EF90F2F76B478BFD9E2CE829DDA524
-:10CE6000B2A1B1F89EBB6646E17204DFAFCDC177D7
-:10CE70005E7D94BF91F9291DCB02A4478C074184A4
-:10CE8000F99B19A37BFB872326CCC43B87A3FA8F8E
-:10CE9000EA81DF43DED95B90154FEFECFDC919F253
-:10CEA000CEDEA1D12EBABF7AC89E4E7A28EE574B5D
-:10CEB00088BDF44D90CF3D607D87417E63FA3AC8CE
-:10CEC000EF1E2047DF00F98DF99B3297316C37C692
-:10CED000A58F7B92EDC73A47C141AD63F88DCD79FF
-:10CEE000A52BC2F7AD985EA3912EDE8AB96634AE4B
-:10CEF000F7AD98CE269EDAAC9466BFDCA33D3D59D3
-:10CF0000EE87E07863683C237C253C8D7094F0FDCF
-:10CF100017E0F9607BF05C84E708B4DFDADF8F4A62
-:10CF20004C43FF26E7B3E51129E23DD2B773D43471
-:10CF30008CF71D42F31C5E752D33A3BFDDCEE1746B
-:10CF4000B29AF910BEA7710968F036D8F79879A49B
-:10CF500029340EFA659BB615E9EEE44695EEEB9F93
-:10CF60007F318CEC76A7FCDC2EB9D8A43D87E56533
-:10CF7000AA6BAD1BF5CDB754FE8EE8F78753264557
-:10CF80005E05BD6EE1EF1C94D9C7B48B4F79BEAC82
-:10CF90004CF310BF6086DFA3E86AE3EF41C877294E
-:10CFA0003BD2B7E4EFB874B5717E2DF1BBD12AF452
-:10CFB00000E86710F0D9E45F86D379EBB104CF21A4
-:10CFC0005C1F9C63E8FDA996AE91249F0E89B8B8BA
-:10CFD000E181BEF4DE5A81F8DD8137C47BEE8744FF
-:10CFE000BCDC910CED6D6CFF86EB5057B43F5CCF11
-:10CFF000B81FE846077F3FFF6ACFE71F6689F8A1A1
-:10D000001C967355BF9310AFD27D8AE12C83FCF040
-:10D01000A370BEC8E7DE9C6D463919F23B09B4AE79
-:10D02000FF6BBF93C058B38AEB4A762AECB1D4ABFE
-:10D03000FFDD04559CABE4EF2714F0A236BF9BF054
-:10D040007854018FCB77CC6BF7771392C5BBD6CCD6
-:10D05000C5E586FCDD84FC44BD1C19E51C71C44992
-:10D06000A9DECE937C85F8B1F86C213FAE16FFE5C2
-:10D070008CF0DF1A67DA89C73F0DD7FAFC12EDF39F
-:10D08000A33A59DC7E575B3AF877FB5D948EF064E7
-:10D09000FCBD14239E8CBF9F92AC9699E91D4881DC
-:10D0A000A7E9F017F174BDF87D8BD1F8FB16EC7F82
-:10D0B0000E6FE30C78FB96AD1D88EF965E2CE47C3A
-:10D0C000BD23B91F9EEA99940DFC6396B01F49FBDE
-:10D0D000888CCB35FE7E92B403C8785DDF488E6FB6
-:10D0E000DF8908F25FDDAD3646A29C3961E2BF9769
-:10D0F0009411AF69D8FF1D59950AC223917977CD54
-:10D1000083F9CFFA8D2D05F3B3BAF3F7225916FF41
-:10D11000BD2039BF59C93C9EAB385BF06F378FDFFC
-:10D120002ACDE676B248B793E2CC0BB398889F65D8
-:10D1300029B3B2913E8F87F542FA5BCFED818DF82E
-:10D140005E65A7E07B95A8A7A35EDC4DE8A5351F2B
-:10D15000DBED9C0E994EFEF7F6DB7571CE7DB73B8D
-:10D1600075F9ECBA445DFD7EFB5CBAF2DC40A6AE1C
-:10D17000BCFF31B72E3FB061B0AEFE351F7974F9F8
-:10D180006B1B0B74F5879CF2EAF2C9ACF95184EF82
-:10D19000E6EC34C25B7745D8495C1C1FB3EE4EA069
-:10D1A000FB4AF2FC21E3DE3541CFC6734D772BD726
-:10D1B000EB6B92183FB7DAC5F994E9CF379A885BE1
-:10D1C000977A3DF3E9E3D665BC7AEB39489C73E482
-:10D1D0007922245EDD83F397F1EAAD7817EF871AA1
-:10D1E000E9F5856CE15733ACA3BB95DFAFABB9C7AD
-:10D1F0004AF784E4FC8CF33A2EE298B7DADB7F0F2F
-:10D200006A7F36B7AB44F6F0EE417A7D12D815C18D
-:10D21000B3CD78EE46FCFD819A7BADEEE5AE2B8F6B
-:10D2200037AB1F5FCF4C7C37378BDE5FA57B8172BE
-:10D23000DCB7057DEFE9A7B4BBBE59D13C3E8E45B6
-:10D240005BE95E4BC7E371B8265AD90A7AB74ADC64
-:10D25000F3B87D6DDD035834D35A6BE10F0FF82D11
-:10D2600068471B3712F4C45CC0C3334B1E72805E28
-:10D27000F4649599EC621F3C7FEE16D0305BEFEDC5
-:10D280007487731AD2C938C43FF47B533F1E9FFE84
-:10D290006D365F5FBEFA7DEB7D0B9B8EFF33E2FF49
-:10D2A000EDD01DD1A35CC7FFD6FD0B49BF4638C9E1
-:10D2B00073391372AD879897849FDC17127EF2FE44
-:10D2C0008B6B91C5BBD941F7680A302E4FE2EFF660
-:10D2D0007E9C2E7BE57078603DE4471DD5CB57B32F
-:10D2E000A2D15FD0C25CD1CE2BD8CDFF97EEA510D6
-:10D2F000FC3BBA4FD7119F68C31F3AB85FD7117D67
-:10D30000D29FABB86717C22778BC94C087BF878904
-:10D31000E2125647EAF7F1B41C2E17FE2EE5850FF0
-:10D32000CEE77A3EC1D0FF51B352157C625EEBEF7F
-:10D330008DE0F7B92B2DA47733E67D18E334FEBCDE
-:10D34000DE42EF3C0EF730D26F8A362AFE4D4AF0AD
-:10D3500077BE0A7D86775AD4EF493FFC76ADE2C4AA
-:10D36000DF8B98BD465F3EDFC17FA764AEF1BD1A7B
-:10D37000E98FBBC2B9BE2047E8E56EE626BD4CC4C6
-:10D3800051148B3A46BDACC5CFFD8D782E57B91DD3
-:10D390008BE2EFA4DC77A1BF2BE41D16806B78260F
-:10D3A000CAF115E676E3225BE1DA41DCC73987880A
-:10D3B000FB70F0389796DD61DC3F2CFD70A2FE39E2
-:10D3C000DF252AC7FAD8DBF95C1EBF22FD6F46FFB6
-:10D3D0005E8BC344FEA996DD9114E7807EAF68A002
-:10D3E0008733A65D09835383F3D31A559DDFC8980D
-:10D3F0006ACBF6D079F2E11EDAE21C8C6F37BBED16
-:10D400006EC8DFE73844EF788D137630E37C5B7FBE
-:10D41000F76F287F57A7C5C7F5DD9602FEDE09F036
-:10D420004786FB49C6734C64A0DD415A18B896E69E
-:10D4300073B5FEAFC99773B9FFF7F2106AAFADB914
-:10D4400096F2DD573CB008EF194DAD996FC1508091
-:10D45000C64797E68743D3C66EFEE5E188B7114A13
-:10D46000BBFE8B0773B85C6934DC5B90A9DA8FEF85
-:10D470001B573FC9CF453CD73285F6C36285C9F8F3
-:10D480002EE2E7327FA956E4F3797EC94A9E6F14F3
-:10D49000BFABB04DD85B70DD98E2BAD12EB043D8A7
-:10D4A0006370DD98E2BAF13BF22FCC23FFC23CF26D
-:10D4B0002FCC23FFC214F9177E2F62DE945C95FBFC
-:10D4C000ED4687EC0FF4DB8D0ED18FD06F179A47A6
-:10D4D000BF5D687DF4DB8596A3DF2EB41CFD76A1CD
-:10D4E00079F4DB85D647BF5D689E0DBE3198477ED7
-:10D4F000E799A8CB4F06FD7F74C8FE46BF5D68FF65
-:10D50000E8B7D3F5A72DD2B5BF8D55E9DAA3DF2E45
-:10D51000B4FE1D558ACEAF7787788776F68638A217
-:10D520001F5FAAB701E9FE4F11FFB8CB82E745B5EF
-:10D530007E013FB785BB399E6B0B38DE4DFC9E8567
-:10D54000D23C83F0BCD4CAF3F93CCEDB483FE817A9
-:10D550001B6DE17E314CD12F8629FAC53045BFD8ED
-:10D56000E89EDC2F8629FAC5F03BFAC53045BF1886
-:10D57000A6E817C314FD6298A25F0C53F48B613BBD
-:10D58000F48B618A7E31FC8E7E314CD12F86DF4F49
-:10D59000A07FCE129C17EAF33D74E74AA043DDB9A1
-:10D5A000D2A9CBA33E1F5A1FF5F9D072D4E743CBC3
-:10D5B000519F0FCDA33E1F5A1FF5F9D07C748E8B5F
-:10D5C000F621EAF5A1ED50AF0FCD67D7FA5E47DB44
-:10D5D000D9F88D178E60DA18A93CA900CB8879613B
-:10D5E000C534F45F3686292931C0392DCAFDD346AA
-:10D5F0002701998838CA1CD66CA2DFEBC3C323C6A7
-:10D60000390418C5AD667F9744E569F2FE1DFE0139
-:10D61000BCE7EE66F47B34D2BF2EDBBB9953C55416
-:10D62000D60FE6DBAF671C5FD623FE19320FBC694D
-:10D630008DF13EB94B1D791837BB4DFC5EEEB6E55A
-:10D640003CDEDA4857F9425FDA66DA7508EFD33420
-:10D65000172A74EF3AC3CC8E59F2104E9579A84729
-:10D6600064F78B11EBAABC0E7F774CCE5BDA41815D
-:10D670004FD0FDC4A1CD0DA3A2A11FCD37827E1F27
-:10D68000679C95EB0FD80ECF957D7D8A6773087DDB
-:10D690005F23F471CDC7C77FE6A909BC5D386FF77A
-:10D6A000CC535104C7092B148A3B1BBA8379F01E53
-:10D6B000B447CCBBEF8E808AE315AEE0E3C97E0BA6
-:10D6C00037A6D0BDD042D6381AEFB5B0010A43BE56
-:10D6D0002DE106EB3B82EBCB80AD8276EC1F7B9F8E
-:10D6E0006AD880987C8C4764F58CDE151D3FE03D40
-:10D6F000DD7A09ED83A85F926BBD7C0ABDE33CC176
-:10D70000B76C39826FBC6FD1EBF1587F0B73A7BA3E
-:10D710004814D1FD63399F3E9E5D26108B2C8B35BE
-:10D7200098C214C4373B1C17423FB0F3A720BE7306
-:10D73000DD167A5779A2D969A1773A3A88D7B9E440
-:10D7400090F13A067DC1109753B3F4A314B4372F68
-:10D750008E3491DD64F19E08D21BB40D0AF135A917
-:10D7600007158A78BF4B2B5E8F9F8670DF65A1FE01
-:10D7700064BC4E79BA3FC584F713BA6CCA8955495F
-:10D780000F58D20FF500DF4BB70CC67A2BF9BBA2AE
-:10D790009756ECE1BF4B2AFC3BF2774EE788F8AF97
-:10D7A000C26C6F34C6C3C8DF5393F764E4EF984A82
-:10D7B0003B4FE1DBFD8F227E0B9F10EF7EAF29A454
-:10D7C000FBEFC6B8AB52A1FF2D5861A1B8AD05065D
-:10D7D000FDB054C4655DE9F74DD7F633E887F277BD
-:10D7E00072441DA676FD3DDA85E5BDCF9916CE07BC
-:10D7F00066EE62E4AF9AB96C9409DFAB667B38FDE4
-:10D80000CC5CC6F59C99AF78E8FEA6D41BDF15FA70
-:10D81000CCA4CBC904FFF785FE3215E35501CEE356
-:10D820001AC3441C5B12A5D32EF3F8D5490ECE0FB4
-:10D830001AF7F377375A7C36AE571D61FCDD380393
-:10D840007D4E34FB4D78A1D13D14E813F2E3511F16
-:10D8500082FEA6A37E1487F49E9A4FF190050ADDFE
-:10D860002332D2FB384BE5EB186F3B6E2B73FB5822
-:10D8700028BD031D637F3E85DE63D0C43957D2B116
-:10D8800091EE674508FB9483DB9F5AED14A8ABD259
-:10D8900023EA7F9A86F1C4B3D066D88596E1C1B8F1
-:10D8A000BDC82C5E7EB4DF9FA6ADC0BB1F1DD82DAA
-:10D8B000D49F58091E9A7C77A2033B02DA0F905F2F
-:10D8C000DE7E67AEB528845F3E9C3BF22BF7C0201E
-:10D8D000BE8B0CF72917DFD7937EFFA823BD7836C0
-:10D8E000C015F7C7ACE8C6BB8052D99FFB31CFE863
-:10D8F000C1F8FB92727D2C80F198B78A7C6C9DED0B
-:10D90000A3350E820BE59BFA9D9F867134E5F6C622
-:10D9100031487615599505189F1DE4539A273915F6
-:10D92000F9546E007F8FEFB8944306FB44AC9BD74D
-:10D9300037DA29666771FECDC47BE39FDFF7F24ECD
-:10D94000945B72FE9F5BF4F76A651AEE16F2A3FA17
-:10D950007FE65E89F13EC9AF92B5BFF783FE1F3601
-:10D96000F1F713BAA8B54CD88BC8AF2CF90613EF52
-:10D970008E04F1EEA1F78DFF0B290E70D50080000B
-:10D98000000000001F8B080000000000000BED7D70
-:10D990000B7854D5B5F03E73E69564122621210F1D
-:10D9A00048980402A94698BC20BC0F9147B068076C
-:10D9B00092286812268447B068236A0D2D2D139291
-:10D9C0006040F0068D82D4C780CA45A51A955B4198
-:10D9D000693B48B56A513148F5D6DE303C7DB535F6
-:10D9E000E2F5AAFFE76DEF5A6BEF9D99733213F0E2
-:10D9F000D1FFEF7FBF8E9FDF669FBDCF7EACBDDEC8
-:10DA00006BED93960D8A735D36635E87F5849200A5
-:10DA100065BB12B08D618CF9666AC13C46BFBFE53B
-:10DA2000307678B48BB114A8E4F5DEF3703263B5C8
-:10DA30006BAD6C233C7A6014D318D41FF891D5EFEA
-:10DA40008371AAAD475EB04399E4E6FDDF69BAC3CE
-:10DA5000C24C384A20D705FDAE6E8C716F84F6BB80
-:10DA60000B3C896E688FCB775BBD0EC6CEBA19F5BD
-:10DA70009F91E249C6E7D76D3A78FF5BF0E8070768
-:10DA8000B2ADDE7CC6EAF615AC4F73E17BDE74778F
-:10DA900009D41D4EAB07DEBBBE35D1EA82B2369546
-:10DAA0003576E5E33CBD59F3E361CDF89BC658817B
-:10DAB0005B610CFA7F50C0A8FCC8C216F07E1D96B0
-:10DAC00079BA7E266A671D5B35FB108003DF3ACB8F
-:10DAD00034339FA990B1E1562FD360FD2DE9CC8D51
-:10DAE000F01A0ACF6D85BC3D2629043F23DCAC8C9F
-:10DAF0006926681F0AA5B53004C74C6857E1B925E7
-:10DB0000EFE442968370638B703F723DB25C2CD61B
-:10DB1000CF16D84D0CD6B5D40EFF862166AAF9B320
-:10DB2000528B195BB54571DAE0D11287EBAA095027
-:10DB30005FF29285AD83FADC2497351DEABD70BE95
-:10DB40003BA1BEF8A602AB0BF65D8D6701EB58B2A8
-:10DB50006D02730D86D20F6551FF796579CD9643BD
-:10DB600099FB5D787C9AD503F05AE2D4AC49F9A1CF
-:10DB7000F6FA0E45F33BFAD7E7BB55DA67351C29B1
-:10DB8000C2AFE6A66CEB6207D65FB2ACCAC77DB97E
-:10DB9000685FF23DE817C07E7373D88B0CD70DFB1E
-:10DBA000DA99CDE72B0C1B7F318E1F363FF45FE4F3
-:10DBB000C17DB9E369BE3A27EC3B1B4B27AD13E0AF
-:10DBC0004070EADD0CE3B9681E3A8FFA80DFE2C6E6
-:10DBD000F598615EA85FEDF45B709EC5AD055606D5
-:10DBE000A577139FC7DB9E68BD04EA7566A735134A
-:10DBF000E789055824D3FAFC3BE16896005C921C47
-:10DC0000380F5B34DFD11F3E7562BD4B3A12AD4B0E
-:10DC100075CFB758F03C16C27ABA229CFBED78EE6D
-:10DC200029B89EE95686EF9B35AB1BD723E07BE6F0
-:10DC300086988D6C10BCDFB9D5920DF59F22FEA69B
-:10DC4000E07B1CBFE6E6047215DCF70D316E5CE785
-:10DC5000426707EDAF0FBE77013CE0F952A787E0BE
-:10DC60000B78E1630087259DFAF30CAD87C37749F4
-:10DC7000671DD1DB32B3D7EA0C5FC7B683B90AC0E0
-:10DC80006521D0B702F0674E6F16E2CBD9BBAECAA2
-:10DC9000A27DC23A11AEF16ED7ACB462C213C263B8
-:10DCA000892FB5459C7EE57CBBDC669A6F97D8577B
-:10DCB00074BAD45E4C43BA84F35DE78A4E97560635
-:10DCC000E3C1BCD6258ABF45E94FA7923E255D4AF0
-:10DCD0003A95F47BBFC5134853427CA676106B7C03
-:10DCE0002A029CCE0A3E72B5385780EB6F10AEB256
-:10DCF000FD7571AED5397A7AC7F170DCE7647B596E
-:10DD000020F786FC507F396F75127F0FF11EF1ED01
-:10DD100039011FECBF8AFA0B78097E51DFC72FF655
-:10DD2000B40D417EF1A4E2467EB16AF3A1CC5B0062
-:10DD30006EAB7E1E879C977DB8F2E1EBD3010ECCD3
-:10DD4000ECA77393EB5AFA7901F189659F4FE2FCD6
-:10DD50002210995FB8F2BC87916FCBFA923B7F3E5D
-:10DD6000CACBF94D00F9CD1F7FFEDCB189C84798B9
-:10DD7000DFE2B924B49FC5ED6F58EA1CE1F0E3FC83
-:10DD80006E63DEB93A3CAF7A87D5A5C2A3FAD63A1C
-:10DD9000E2BF2C8DB97395D0F91BF1A2AE55D1E835
-:10DDA000BDA6717EF55BE4D3F59BE6319453F2DCBE
-:10DDB0006062C6C6C13E1987AF5CFF4762FDE704DB
-:10DDC0007FBB5AE0F7D50DD3ADE9C9B8DFBA22E081
-:10DDD0008C6CA178BE7089FE79DFB939FBF8FC7ACA
-:10DDE000A497735DFCDCCE6DB210FF39B727DECF90
-:10DDF000607F1FAE7AE6B52BA1DF0777EFC862AA76
-:10DE0000FEDC58113F372C97C3B9B1C111CF4D2D4E
-:10DE100008E3C3CB1FE0E756FFF8ABFFF1AC8BF68E
-:10DE2000CBF9DD669B1FF9F1E2AE27E91C17B66F4F
-:10DE3000B16443BFC105D93A3E5EDF58E06400DFFC
-:10DE4000ABDB7758904F0C2EE07034D203941A0B52
-:10DE5000A333944B4A12E25F301DF14FF647FEF8B0
-:10DE600024CC73D30D31096C6C689EC9059CCEEA35
-:10DE70001B139370BEFAC6BADBD998903C30EEF310
-:10DE8000540CA797C5301ED2EDA9E9EEAC55849F7E
-:10DE9000A68872B7A8809FE3CF00DC31800F43E3F0
-:10DEA000BA1E41380CFD41AC1BF9C7C891413FCEA9
-:10DEB0008BF88DEBB602FFB443BF912B831FE33A7F
-:10DEC000460286E17B58C62751C986407D272CBB78
-:10DED00014CA1C95970B0B389E407B00DB5972B01F
-:10DEE00004F72FF1DB88BF56F6507B0EF2B164E6E3
-:10DEF0006E7185F0558E23F155E273B4FDCD2BE0A4
-:10DF00007CE57CFB3B95CDE1698D85FD257D85FD1F
-:10DF100001B2962685F625D7C7F2605DA83FFEF8C8
-:10DF2000921D1B619E53CDEEAC46C740FBED9C3964
-:10DF300024C27E8DFB9474B3C4CE691AE866501077
-:10DF4000D67DAE63C420943BA714906FF0DEA91B6E
-:10DF5000624CB87EB9AF5D6BA133AC75F75A3B9597
-:10DF60008FAE05C21BCDD89EB569547F7CAD8BCAE0
-:10DF7000AEB579F4FCE68224BE0F168C473D13F44F
-:10DF800001CE0F029C4E7A9A46D0BEE473A917F4D4
-:10DF90003883F14961FCFB74A3909B2CB819E99B71
-:10DFA000358D600FC3543D1DA7E24DF9889F7C7DE0
-:10DFB000F2BD9B2CBDC40F59BCD5F530905CDC4D37
-:10DFC0006FCC4C85F99676661728F05E4D53514F0D
-:10DFD00013B4D7B4A6BA916F2C75B8D6A35C5CEA1B
-:10DFE000CB76A35C8CEB2C38BB0DDA97B65EECC617
-:10DFF000FE3729CC83F405FC9321DC96B1BE9F66E5
-:10E0000007BEB65CF0B5E5C82F015ECB9A0E8D74E5
-:10E01000C2FBCBDC310528DF976FE376C25C136B64
-:10E0200057500EB77866211FEBBD4771A3BEC9EEEE
-:10E0300005FE6A0FF1577F9EA7A300E5D297807F68
-:10E0400030FE45288355DC579786FB60A08F3CCC7B
-:10E0500070DD1ED2EB07097CE9E93C11EFCAE7F05D
-:10E06000467D9D793513F2DD5542AE0DB7F69EB86B
-:10E0700015F59978937B27E797AFBB709F2FABCCB3
-:10E0800046F246F417FC74F84F4BEDC8DF56C5E76F
-:10E09000A4925EB54D25FE28F1A741AC79E98E8AA0
-:10E0A0002188374BA11DE5DD767C082C747DE7A522
-:10E0B0004310AF966C9979B70FE4589680E3697373
-:10E0C000701E9ECF7B3B52939A512FBCAE6514833A
-:10E0D000F6253B6ECDC2F2BD1D310B90DFCF70CE69
-:10E0E0009B9108FB5D766F62811A26377E2DE8F1E1
-:10E0F000DAEB2E4D457B60E55F0FDDEF1C01F3038E
-:10E10000AC11EE9F76C5F97DD065E5DA7D592AD050
-:10E11000D85F6DDE67916F7FDF74E0CA09C8FF15B5
-:10E12000FFAE74EAEF4A7546A0F73EF90AF8EE0230
-:10E130007CBEEEA76FD3387F361DBE6221BCBFF216
-:10E14000BAA713709CEFDF75749C139EDF3DD2FB62
-:10E15000229ED707CA8E5D4E144CDB768C41B9FDEA
-:10E160005B6147CD4DF25CB910E1FEB24A708F366B
-:10E170005FC33E85E02BEB35FE41A4CF7A03CCEAAA
-:10E18000C4D2C9485F7E4F654DA80F48BD463EFFCB
-:10E190008380CB7B833AB2102F56ECDA9A8572E5F6
-:10E1A000FD785EAFDE75D52BC8A7BC0FD9B8DE6E83
-:10E1B00066A427D7FBB8DECD1A805ED343F39F2E2B
-:10E1C00088A3F5AFD856A4938780A1F4FC7D332BA8
-:10E1D000C7750C6FE92D40FDEB1D7360299EEB3B6D
-:10E1E000A0D7A27DFB6B21CFDEE95067E1731F1042
-:10E1F00012EA23EF743C1D3FD211D2E3E28BBB0243
-:10E20000C8E7AEDB9B58A8729422FCBADE29F993CA
-:10E2100063D6D064D2C79C88A7ABF6BF308BF13AE7
-:10E2200008C2E8F0BC56E8617DF5BD4F925DB7725B
-:10E230000FD72756763DF962068C73FD3EA14F0835
-:10E240003DE53A41CFD7EFE570B96EEF096B7DB888
-:10E250003D9297B47E286882B6C2410BEE72A1BD92
-:10E260000D8B9808F8DD655AD80C4C3CCBEDE47A60
-:10E27000A5B997F4C38D79DD64975FD72AC6CBEB38
-:10E280005E9F43FB9D37385C1FB2175A08AEF27D84
-:10E290008007BDF7594CC218E47F81EB62DB51AEB9
-:10E2A0006BD73BCC58B65CE720397F6FA329CF0CE6
-:10E2B000F0D5945837EA714D76DEFF96D8849D5894
-:10E2C0001E88E5F5CF62B2484E7D66F23CB90CFA85
-:10E2D000DDA21E896123F0C87B0F99A03E2AC53BB1
-:10E2E000BC10E64F65403D2ACA8F8082ED1FFDF2CB
-:10E2F000DD225CC7D4E1C14F182CCDA2242E9C0195
-:10E300007832BAD0C9F97B7EB008F13DE579CEAF5D
-:10E31000EFB3B0769477CCEC61F3E17900F9179E16
-:10E32000FF17263FF2E3034AE0C170FDABBA90EB62
-:10E330000F1E9BA35D81752ECFF6BA711DDF532C86
-:10E3400097A0EAC25C6A2E8EFF9185B74B3DB64C12
-:10E3500030E14C618F5933D21CB8BF16012F45D321
-:10E360005813AC635DFEF3F5882FB7F5DA990DE627
-:10E370002FEB8D25BD3633A39CE45B8B808BE24A6B
-:10E380004699C39ECF37F96CB0DEDB98DD8FFD99DF
-:10E39000DDA0FF9A62347C4F39F0DB2F90DF0F5500
-:10E3A0003F3E3408FA0FBD4571B7409FDA7367EFFF
-:10E3B0007B9DA1FDEC2F40F82D4DF15E5608E7D96D
-:10E3C00073AEFC8417CEFB366797DD9DCFC70BDF9E
-:10E3D000C781D55F24249942EBFBA8F7ECCF9F2996
-:10E3E000C6D24E72A8EC80CAFD4D86F57C94E6320A
-:10E3F000D339F5DA0326ECEF30F91505FB1F7A1B4C
-:10E40000D75766770454D4E3ED963F85CB1976242D
-:10E4100033F1ECC5245AD8DF405918D2C2CF6FEA85
-:10E4200020BD7DF98342AE3FFE409C9384AF841BA8
-:10E4300073692C5CCEFCCAB1AB86FBB1381DFF40C2
-:10E440003C3FF7790EE917E70E809E1141EF94E506
-:10E4500051D433407F08E468B7149684E46C9594F3
-:10E46000BA420EAB62DC2A01AF2A8789C3A7D20069
-:10E470001F813746BC309EBB3C4FF6A3232F0CCAEE
-:10E48000A673BCE45F189DDF3A5C47CF1787DB803B
-:10E49000DC5886AA9DF066FF239E5F206634EA154D
-:10E4A000779948AF40BD0FF544C93FBCC807C6D2F5
-:10E4B00073AE07E631E21BB56A2CF9198D7C43F285
-:10E4C0000B6F2C9463906F74103FB845ED7DC1A421
-:10E4D00084F8C4F0F2E02528877BC0F4C7F6A0A931
-:10E4E0008B9EBF549843F8328C1D49C7E760AF94A8
-:10E4F000A01EA8DA1FBCEF348894CE0D9C3E5A2C87
-:10E50000FE7B96217FA872B851AFFBC86FF25960AD
-:10E510009D9D899C6F74AEC82079FE11137C648127
-:10E5200095F8C82493C947F6D6C20CB2B7FAFAE7F1
-:10E53000BAC8BFFA8BBFAAA3B661FB3C3BC9DD4E8C
-:10E5400094C750EFDC7C09B53F27F9D20ACE973A41
-:10E55000E769E9B1D83E6F8809E7DB9EEC7D1ECF05
-:10E560003D43F53F1283FAE4F763D9C3F0BC335B54
-:10E570004B47797BB7E259B814DFBF84AF3BB83063
-:10E58000F6F15DFC7802E84FEA698ADFB9314C3E6A
-:10E590001D1ECDF9FA70DF897B105EBE329687FAB8
-:10E5A0007C0FE2E7D8D0798155CE9A9242E7966CFB
-:10E5B000383789AF3E0B9C5F323FBF754AF4F34B4F
-:10E5C00016E7A734017E13FFE7E7738BCAF93BFB1D
-:10E5D0001518E0507E9CE20DE27E5B6E8073218117
-:10E5E00018BC19E175DFEA780DF7D163620D5D1192
-:10E5F000E8F643C11F184A63A08745821E1649BC2E
-:10E600005D63C0DBE0B0C4B371026FE1FDE7E23CE3
-:10E610007FC679FFAC1C1D870F0FFFB7BA20D23C15
-:10E62000FF25F8CF41BBF7D34292AF653A7DF57035
-:10E63000C1BB9928A7D8978786A1DC7D2AD9F33951
-:10E640008E1B33B297FCE63DE9BD16DC67CFC20FE7
-:10E6500032512F5AD4F45BA2AF0B5DE7BAB85A0B14
-:10E660008E9358996D0942995A99FD02E2CFB139BA
-:10E6700036972D821E7270CEE84CD47FBBAB4667B6
-:10E6800022DFEB86033C82EB33BBE291FFB17D35A9
-:10E69000C4C7AA041FEBAE1CC19F0BBE19F67C7346
-:10E6A00031EAB50E933B5C5F3096EF03DF0C00DF81
-:10E6B0007C17EC332CCF807D1600FDF514D86758FD
-:10E6C0003F01F61996C7C13EC3B27BAD9BDA5B2A08
-:10E6D00047EC0BC2397FDAAED0F8E8BF8DA4175FE4
-:10E6E000FB90CA02123EF07FC3BD712C9017AA2F77
-:10E6F000EB1CACAB2FD93454575FDC3A4257977AB6
-:10E70000A477CDC5BA712BCA8B74FDD6C58DB1E087
-:10E71000B926961770B8971710DCBB2F8F02F7CB6E
-:10E72000C713DC8FCE199F89F03C8A7047FBCDEC74
-:10E730008EC77390709F2FE63C5A5EC49F0BB887BC
-:10E740009E570C28A73E4478DB10EE762ADF4578EA
-:10E7500013DC39BC4F21BC6D08F73C2A8F23BC4722
-:10E76000E3B800EFE2F3C37BE51E5507876B1FD2CA
-:10E77000C3BBE1DEC106F80FD5C171C9A611BABA93
-:10E7800084F7E2563DBCBD6B8A0CFD18DB0470A813
-:10E79000C07F001D1C2D994D7129B39DF9E280AFFA
-:10E7A0002422BDC1FACD950AD78FE0D70174381F56
-:10E7B000FF01F46576F0F6D6858A1FF912EA4468FF
-:10E7C00057005C0371406715CE5167902F5D851C23
-:10E7D0004C45BBDE4FE5352C40F459C382545FC431
-:10E7E0007AB3AC505EAF06D6A3FFEE55BBF7C62298
-:10E7F000A0FBFF9AF3468F8244E9AE1B8D74CE1CBA
-:10E8000049646F463B27E0945C1FC7AEE3C4BEE09B
-:10E810005789FC1FDEEB8E1B73F3CD700E1FD505E1
-:10E82000C7E1FC2BEDDE07924D345F7311F2258BAF
-:10E8300077F46078FE6AC9F84CA47FE649D1D949DB
-:10E84000D1E6DB829B0538D495039C148CC371B848
-:10E850009CAEE27039B8C566457FC6E90D16F25721
-:10E860006E8DCBCA42BC3DDD363B0BF1AE79CBE8B9
-:10E870002CC4F7F9EDB3DF47FE3D539D5B8BEF9F53
-:10E88000ECE078CFD80DA477DD2CCEEEA48BB903C5
-:10E89000D05E3527DEED83FD787DD909B45EA639DB
-:10E8A0000AA05FBDD8777DC7F2B9389EDCFFE24D84
-:10E8B00036DDF97FAF545FAF62D6109E65E3395BFA
-:10E8C00043ED78FE6AF520EF007674D31F77BCF233
-:10E8D0009BB0F11E2B8A4F46BECAC6B3F17F53438D
-:10E8E000EF4783EB676BFDAFFC26370457894FEB8F
-:10E8F0008B3C7B111FE031C5DB8096481E5CDFE757
-:10E90000D73A9080F0DB12F7ABDB27215CDEE47EA8
-:10E910008EAD71B5C43F3E44BE9D8D7CFAAACC60DD
-:10E92000185F90EF07053F3DF6F3AB888F1CAA4AAE
-:10E93000A5784CF75EEE5F3E2EE8BEBBF2AA9A9B2E
-:10E94000817F76EF5149CFEBDEF7C90BE8A7E9EEFF
-:10E9500052DC02E4A6F071BBF7013F477EEBB150F9
-:10E96000FBC13D4FD33ABF2D7E5EB95FF0F36D7CA6
-:10E97000FEA5660FF117E65DA0DBDFDF8BAF9F8F93
-:10E980009F1FB3703CED3EA692BF8DF9B42379432F
-:10E99000C2F0B39CE36773958D71F9CAF9CCFC4A58
-:10E9A000A003D4F399AB046DCA0FF755A490BCDC57
-:10E9B000643989FAB413FE43B96D846315339F0C2F
-:10E9C00086E1EFCABDD03F6C7DF3B13D0C9F8DF861
-:10E9D000AA1403BE5E1CC2D74FD99759D61CDE7E3F
-:10E9E000644888EFE12F9CBF48BE25F117F8562DEB
-:10E9F000F235E02B8E62C0DB1F1666FF32A884F171
-:10EA0000950BE4635BE2FE4A72706BDC5F098F8FEB
-:10EA100056093C063D039F775FCEF50DE65F40F457
-:10EA2000B048EA11164F3CFA498FAD199C80ED278A
-:10EA30005A2B88EE243D19E73B2EF04FF65B64EE2F
-:10EA4000B5B823C843EF1A3DFEB0DD0B08DF6F36C3
-:10EA5000E059B4F18DFDE53C8B0CF15EE33C938B0A
-:10EA600085DED9557341F32119F6BD4FFA6D6C0857
-:10EA70002F55E4039FC50749FF5AA0D3CB8E978F2C
-:10EA800027BDEC68E52711F5B3E3959FBC3A1EE975
-:10EA9000ADDC22E8BD81DEAF10EDC675BC2BF4867F
-:10EAA00033827F9C12742DDBD51D6D43AE46BC5F57
-:10EAB000A3BA915F1D9B5B4478FE9EBF8AE63F5ED2
-:10EAC000A992BFA976EF77AE467F935C8F9CAFE2A9
-:10EAD000F24FE2D19FF629C00BFD631516774A2449
-:10EAE000FDC2088F68E34AFC017DF618EEF328F2B8
-:10EAF000516CF5EAE17414DF87F6F93B548AB719D3
-:10EB0000E17468CE68E24BC7770BFE0970453DBCE7
-:10EB1000E15EFDB92EEB8C33F09BC1BAF6F9555C82
-:10EB20002F93FC5AAEEFE89A1129CC71E1E72DC77B
-:10EB3000B9507CB956BC8F62F36F247F9374E38124
-:10EB4000A568982FC7D07E91A1BD505FBF403C3EC5
-:10EB500021F047CA9F1331EE9A4871BCE397D91A46
-:10EB6000C2F313FEB598FB87FFB558C4BDBFA2DC46
-:10EB7000DE69E083E77B5FF2BDA622CF23C8EF58B2
-:10EB8000A082E2D917CAE7C2E4FC93C548E741C5B1
-:10EB90008AEF4BBDEADA722E17B6C63D4E791A7F60
-:10EBA0006EE67AD1C1661BE1E15F2EE7ED7FF9B732
-:10EBB00077499F3AB47F6B42B89C9778F9FEBED9EB
-:10EBC00009E8173E5DF96042B81D20DB3FA87CF0E4
-:10EBD000F68944DFAA7BA073F9BAF64077A5B0079F
-:10EBE00084BEF07D73D7FF157BC06807CC54EF4D12
-:10EBF00040FE67B407DE7769094E828FA03B21573C
-:10EC0000AE15F0F98B454BA038DDEE222E570CF8EF
-:10EC100029E17056C26153C580787346C805595FB3
-:10EC20006A66040FAF9D91BECC3A1537C6BF304D12
-:10EC3000A514CEE54865C183E8BF92FD7F54C2F3B9
-:10EC4000A9E43CC7EE53BAD0BFF2DBD68A9A9B3117
-:10EC5000DF616E1CF155D97F996F60F9756C73E2B5
-:10EC600015388F779BEAC6475EDF8994F0F54B3DF8
-:10EC7000CDF8DE0A73C705D9D15EDF8E04B46F8389
-:10EC8000629DC1833156577CFFF7305E83FB5F3155
-:10EC9000577537C3FA576CE2EBAAF2A9EE1CA8FF2E
-:10ECA000B6E3C12B900E4E35594CDC3E70EAF0FCB9
-:10ECB0007047D16BD8FF7439972B272A2F4DC03C52
-:10ECC00038DF368B3BD7D57FBED108478CF3ECB30A
-:10ECD00099D07FFA7E938505C87FE1217BF9D8A67C
-:10ECE0001154BE8FF0E3F6359D7F5109F7739DEA0D
-:10ECF000A81FC2E9C945EB90F87262B75AEE8FC0FF
-:10ED0000AF8AC47C67BE7C82F0EDC5DD15248F4FD1
-:10ED100055F279CEAC7127203C7FB749253A3EEDBC
-:10ED2000E3E31FDC7F6BC244D8C7FB957C5FEFEF4A
-:10ED3000BBE5B509B0CF60A594C75C4EC9FC9EE0A9
-:10ED4000A61114EFFD732BB7BF25BDCB78F8A5AB8B
-:10ED50008F25D0FB52CEED59A05B7FF7EE53648731
-:10ED6000BDBF0966E372CE5180F986FC75B66CAE04
-:10ED7000FE7CE757C6E9EA8BDAF5F2AC793FE75754
-:10ED8000463D77E926D083D12F65B0F3EA9B8B12FD
-:10ED90004A917E510FC63C93872B5E48C57D74D542
-:10EDA00050BF4A1137ABEFB4E9F84155ABDEAE5B6B
-:10EDB0006CB0E3FAD975067924E1745D14F924F591
-:10EDC000B96E61AF1CB7786A22E553AC2EE17ADBED
-:10EDD00022A0DF348C1331AD6A9280F746848FB560
-:10EDE000F7D35CD0A7BB55F714D4ABFBD181410F4F
-:10EDF000AC28D7C397B97DAC54FA235CA4DF9F45F8
-:10EE0000FDBF7DB090DB3E9043F12897B41F97A0E3
-:10EE10005CBA50FFC105EBE7B5423FAFD5E9E7DD8E
-:10EE2000D825ECFD835557919FEAD8E55791BE7ED2
-:10EE3000ACCF4FE5D1F9A9A45E776C6E854EFF0C7F
-:10EE40007B3E880DC04FA3E99B27901F139FE6725E
-:10EE500069BDB0235B851D796CAEB0239319D19148
-:10EE6000D9ACB148FCECABEA6F8B5BF572C9BB4621
-:10EE70006F3F3E33DDFB5409E0872DED22DD738BC0
-:10EE8000B350EF3F34E0E750C6FDE7B7A22F00E0F4
-:10EE9000DE52C5F34EF139E6BF48B9C4A03FF28B4C
-:10EEA000AA4D17F937F2769F5A88E9720C553AEA5B
-:10EEB0006FE6754DE1759F43B4AB22EFCD02F513BC
-:10EEC000D9EE05A877615E4F5C126F4714190A7876
-:10EED0009D9014927FE8D78FE1A1755F02BC37AC9B
-:10EEE00032FB3748D798EF330AEAC74AB2096FD2E4
-:10EEF000D0A55F48E30730AF27D8328DFCCD15F69B
-:10EF0000041E9F073B7A60FC6BE6F650F9609A6C32
-:10EF10009899AF272A3E8B7EE7C3E7303DEC24D19A
-:10EF20000B3391BF654BDC180BE2EF7C872713E1B5
-:10EF300000F84EF2B5FB9756E2C307ABB81FB67B9D
-:10EF4000CEF8FB6E82E7639E70902FBD7BA9F483A1
-:10EF5000F7C687E3EDF135A74CC8977FBF8FB9316E
-:10EF60008FF1F89EEA175E81710EADA9DF5C8274A5
-:10EF7000745825BBC1E8BF9DFEC464B2BFAEBC5C83
-:10EF8000A5FCEEA3E52A43B9767453ACCE0E09F97D
-:10EF90007555C28F4F0F98A91D4D9D3CCCBF42FFA8
-:10EFA00026E66995F3737956F0B32E718E8F083D7E
-:10EFB0006697A09B4E41377708BAD960F4EFDECB55
-:10EFC000E9E6E83E301C40AEBF3EB7BE8CFCD6DB67
-:10EFD00018C5A1B3E7A81B8B617F17DBDC1684DFA4
-:10EFE000F4B9051C9E958A09E33715E50516A4F7C3
-:10EFF0008B07BB2CC8472BCAE7517D466536D9F92C
-:10F0000007D7807C447B3FDE9D89743972AE2D60CA
-:10F010004A40BBB188F8C4A4F74C3A7A2908C4EA3C
-:10F02000E8EEA2879274EDA3B765E8EA299E1C5D1D
-:10F03000FFC1E57A7A8C1D59A8E7BB8CEB8512CE0F
-:10F0400033D5C9E4E73A1E92A3D42EF511E9AF9364
-:10F05000FD015A3ABED62EE4C818A8633EDD86CA22
-:10F06000163BE64D7CDA6576F3F1AB493FB067EFCE
-:10F07000B5239D606815F3ABDAA5FE29FCF74C6358
-:10F0800086756D6218673D5ECE089F62463205F553
-:10F09000AF4E71DE778A7981AF4EB7909F8E9FE336
-:10F0A000E0B91EEAC73C7AFB200DE9AC10F184BF41
-:10F0B000FF88787F97C097E3E50FAE8B457C58C0FB
-:10F0C00048DF98A9AE5C87F1C4E37319D14957E0D2
-:10F0D000F9585C3F8E83F981CF461BA7F2E977AEE2
-:10F0E000C7F5ECB6D238150FB1A98827177DEFC444
-:10F0F00007AF21F8B6390FC5B0FE7278CC439A1B22
-:10F100008193F71E0B58A80C68C87FF2DE3BA26102
-:10F110003CF0A2BFECFEE07186F372B9D02EF0DBBA
-:10F12000C85F1F7BF8178B513E3FB66B7BE1DB500E
-:10F130007E67DD3D194D503EB2EEFBDB6F7285FC04
-:10F14000A5BBAE58BEB313EAA3BFFB9347F7225E3D
-:10F150005DF1933FECC5F55EF1C57F3860FDA35AC4
-:10F16000E219D2B75C9F719E34D6AE605C14F92868
-:10F17000F165B38FEA753EBDFD6394FBD8DF0CF0FB
-:10F18000AB687A8CE2CB69E2FDA397DFAAA830EFE7
-:10F19000DB759CAF74AFEDED9C61A1FE01EC0F7CC3
-:10F1A00092F235870E03B682EF5B7D0AC6C54141F8
-:10F1B0007263BC371DDA919F33978BF4AB2C89BFF8
-:10F1C00082AFE0350746FE4033E1599E884722FF73
-:10F1D000457E7FE7381E071FEA601A9E6FF9739B12
-:10F1E00014CC537BCBEB72935EB096DD3503ECE42D
-:10F1F0008B549E779157FED6D5782EB055B3B73045
-:10F2000034EE6EA1D7953FE7A0BCEDB7763B769084
-:10F210009E7FE40A53B87E58F6D89F9EFA1DE257A7
-:10F220005D0CE197516FE916F4D157B7B8EEBB0901
-:10F23000E0E3FBA59DDB559A2B93EC74B72B13F3FE
-:10F2400077FAFAFD44C6D3DCFF81FC7C7E751CC5D1
-:10F2500019645C492DFFB80DE97151696309EAEF42
-:10F2600019780E834371ECB7575829DFC0A7C452F1
-:10F270005E7AB478F5A171D9229EDC3896D6C11A8F
-:10F28000C763F9C98296FBACAEE8F2AA559C6BB491
-:10F29000768B957923C5950F8DE3FE90163C074B31
-:10F2A000D839387E7F35C687A39D0333FB0B29CF22
-:10F2B000D26E1F897920A9E2F1D6B89FBE8AF2AA40
-:10F2C000E7189757A94D9FAD45FA937E8BDA34D650
-:10F2D0001737D3E03D8B782F55C459908651FFAE38
-:10F2E00015F1A29E1A46F1A2D4A677FF1BE1B34501
-:10F2F0008C5FFB261FDF6A0E1C447CA975B848EEA4
-:10F30000F4A424B8F15E13FB92E7A764308E8F72E9
-:10F310007C26C6C795B3B075A7C656BF4ED7A7A65D
-:10F32000B2401CE28F62A77933D6D828AF55EA578E
-:10F33000A94DB7DEA08ED18DA7A05EFD5635B7B71B
-:10F34000D1ECEC1B375BA757919E655C877CAFC700
-:10F35000C2F6A1FD1BA667911EC6C2E719A1AB0BA1
-:10F360003F9ABE6E49B3EAF8C45B5F560C6AE4721A
-:10F37000C0953C8EFBEF101E521F937A5BBF710548
-:10F38000BD87E9973EE417328FA24F4F6A08B39BBF
-:10F3900072FABF27F3D5E4394878467BFF99E95ADA
-:10F3A000C278D2B302348E570C638A7364117C0D19
-:10F3B000FC12D816CFA7177A286891BA3C06A9572D
-:10F3C0004AFEDC23F86E303B487E4399273E0CDE34
-:10F3D000C9423D687C22D183D44F8FAFFD88E2EFD4
-:10F3E000B5A887C2FCC1751FEAEEA114974D1F395D
-:10F3F0009EFC73FA7C89B0B82BADD72BF8E64CD5C0
-:10F4000041792B3D2CD68DFCABC727F4B13FC6917B
-:10F410003E26F985913F5CEED6F3FFEF95EAF9FFC2
-:10F420003C6DB0C12ED4C7A9AA3C8678F89B7374F2
-:10F430007C53F29F5BD0CDA7A27BC943719DC38251
-:10F440005FBE26F4402B6BA4E776CC171D81FCBF72
-:10F450008B4A073B426502EBA5D2C99C945F93C4DB
-:10F46000DC5426330F9543582395698CE75365B0D8
-:10F470002E2A87B1235466B15E2A5DCC69C23287D9
-:10F48000B9A91CC93C547A9893E2E46FC607338F3C
-:10F4900002FCE65EC5C86FCF7C7BAFD1E09C7AAA48
-:10F4A000441D1108E96A26E3C8E77B8AB7CF91F5C6
-:10F4B000A7AFD1B07D3AEF5F3F7EFFCF7C0EE23742
-:10F4C000A2FD17BCBDAFFE6FD74CC7F72D26AAFF14
-:10F4D00040F47FBC585B82F8DA349ED17927166BF2
-:10F4E000CBC2EB4F16690DE1F5E325DAB5E17556B0
-:10F4F000A4AD44FC91F5B145DAF5E1F5B612AD9154
-:10F50000D779BEE99B168DF45DF8ED56C6717CC3C4
-:10F51000DF20D5DB4474B34731E3B9DA04BD59F1D8
-:10F520001C55A423B7DD86A587E7FD04631CC138FD
-:10F53000D300F68F818E82C89F000F2F51BC6D348F
-:10F540008F819F283E913F98AC8F9B00BE935F3583
-:10F55000B886DBE98C456E97F39E0FCF9916E6E7E8
-:10F56000CD098D1B6D1F46FC3D22F4BC6EA1E7BD8D
-:10F5700029E2C87DFB0E9A13CFDA43741CDD3E34BA
-:10F58000B3B3E1FCB2DFBEFF546301BA0E36D99CBF
-:10F5900028EF7A62D86B68A7F98EA90CF58CAFBA00
-:10F5A000DE9AA2594F72BE38CC49F903725EC16728
-:10F5B0007AF09FA0E75C3C48DA976E3B8737B73B11
-:10F5C00012C5BA5A66245D9647FE7CAED7E75B8EBD
-:10F5D000CC9B0DEB4CDDC4FDAA0948DF183A7BE259
-:10F5E0008F4E8CA375CC3431E4536DD2CF6BF0C702
-:10F5F0006D99B1CA19EE0F6E4BF02B18BFCC08C431
-:10F60000703F4432F3C7A01C2D779753DE8C4F75A3
-:10F610009663BD9A5D9107F5C59DAAAB1CE63DD4E6
-:10F62000F9F42AF4032EA9B6521CC3A2CD7A9FFB8B
-:10F63000FF78FE4692C0F3D60D367700E198E220BF
-:10F64000BF6D7E5B6139DABB2D8EA424C4C5A4EAEC
-:10F6500065E4376C71B85FC2FB1D3EA789F2139950
-:10F6600053B35780BEB2E3267339F2F1CC278B1324
-:10F67000D4B0759F6A3D17837190079C266A7F609E
-:10F680004D997D9903EF3182BD00E521E7490DF5E4
-:10F69000F7EDD007FD8DB7379CEC1835C0392694AF
-:10F6A0005B75781BE7D6D76D067FA3C5A017F48ED0
-:10F6B000177922E3D8383CE7B18F7E49F6EF2287ED
-:10F6C0008BFCEA65ED0AE5C7040FBAB350DF3CB521
-:10F6D0007934E5BBB4B6EBFDD1C14C9685F77DEA34
-:10F6E0003A14D257D5D68F9BF1BDE179AE741C6721
-:10F6F000B8BB37DD19467F0FFCE4873128EF5AF19C
-:10F70000C21AE111E3712161AFCA7BE575CE733591
-:10F71000A8F72FE978C383F04FD44C4433C72DFEAC
-:10F72000343CFF8DD3E7135DE23D2DD463FAE9A3AA
-:10F730009FC33AC3EE27B425E7C4E2BC21FCD5122F
-:10F7400070BFA73B8A483FDAD95E46F7018CE3DCFD
-:10F75000B69675A1DEDAB6D6DE1549FFBD2DCB9380
-:10F7600085F7B7CF6C99BE9EC1F99F39B8220DEFCE
-:10F77000BB2FEDB0B11857FFFEA7B78CA7F996E2E3
-:10F780003D6A9CB7639E15E5C6ECCEE95684DB6DF9
-:10F790006B173C193ECFCFCABCA34A81FEE23A9E0A
-:10F7A000243C71B0800FE1FAEB295A16EA17A773CF
-:10F7B00059C47C4E77A942FCFC77533C743FE54C1E
-:10F7C00066E47EC5A55C3F7FA4D445FDEBCCECB5DB
-:10F7D000E5C9640F3A915E4FB51751FCCE8271773F
-:10F7E000908B967D5FAE45FCFFA4BAFEEDE5D0DEC2
-:10F7F00036E7CAF7B01C6B6D24BD99FD5E257A0013
-:10F80000BD90EE89FD67A5DDD912964788FAA3A6BB
-:10F81000F36B7818DA1F9676356005FE6E397096B0
-:10F82000F470C4572D0C7FE9374EE8F3223F246D66
-:10F830001CDDBBA35FDB6557FA03509E6CAFB74777
-:10F840003AC7E8F3878D8BFAED0CA6C584CD0F522D
-:10F8500031407E6D2F9FAFAF9F68073354A3F509EA
-:10F86000BDDCD82ED73F7A9B9E3E9789F391FA79DB
-:10F87000B4F57EC7AF7FAF058313949771858E5E15
-:10F880002E52BB56615C85BDC5F93FD875CC13219E
-:10F89000CE15E2B3B0F621027E00CFF5C9F3C93E22
-:10F8A00089B60EABFF88963D2664BF7D274DBF2EDF
-:10F8B000D9AFA594C7C16D7E16B0246019A0FB1CFA
-:10F8C00036781FE5F7A7D5373A2F8B4017B234F2B9
-:10F8D0002DFCB9C2E23F463E81683052EA2326FE43
-:10F8E000BE16C6E7E2EFE2FAEFE96D0AE9BF1BB721
-:10F8F000F03C8A4FFD5027E5829F13AA167F13CA5A
-:10F900008E23ECDEE1B2E7DA6FBFC8A583DB128A93
-:10F910006789F6F71EFDD16BD8FEEEE33FF2E07289
-:10F920006F4D5E92C0F9D689C538CF998BADE48F03
-:10F93000C19F5DE207745CEEB7E9F070E3FE47B784
-:10F940002D46B9B3DFEEC674BCA5DBF4EDB6B4B09A
-:10F950007D318E5F3E1D9C8239F3808E8EFFE45F89
-:10F96000E97E782CF24FA4C73536BA17D68F0E4AE7
-:10F97000FBBE334278BB381487A2FB2092AE4E6E9A
-:10F980006A39A3C238EBD7585DF43D0583FD75DCB9
-:10F99000354F4B0B8B0F5BD7F07B9A2CDC4ECC0991
-:10F9A000ED5F8E7BDC576F7739FA8FD70FEFA28C24
-:10F9B00037A84CFB2DF2C5B432CFCBA5148FAEA720
-:10F9C0007D37ED5B73FC15E8737BACF7D5D2125C29
-:10F9D000FF88710ADE9731BBE8DE606BAB2906F960
-:10F9E0007E4797396624C2BBD54472BEA32B3976B5
-:10F9F00024CA258789E2A72857D430FF3E9BC0F947
-:10FA000064487E7812C2F59F58818F67F284FE3376
-:10FA100083EB3FCA130748EF686DE3712AA96F387B
-:10FA200005FE385B791C329AFE838C07D71D5FB2C6
-:10FA3000C4897CAD2D817F7F63C90CB70FEF735EE6
-:10FA4000EA60243786E3A50AD4B31CCC3F1BE651F9
-:10FA50009D5CBFF17630D267921C0E37823AB5D3E7
-:10FA6000EFA3756B9CCEECF01FC233364F6338BEEC
-:10FA7000D9A057580D7A836AA87F51AAD72398D066
-:10FA8000BF653C387EF3C07940D2AFDB21FC13A0C8
-:10FA90003FF9E8DE4829F323DE324D73250F09D9FB
-:10FAA00001E877C4F6B452B6A3252CFEA4682F92C1
-:10FAB000DF40FA25A5FF41FA39C69482BD9610E6CB
-:10FAC0008FF81598962AC5C39226009E64033B20A2
-:10FAD0007B329F29FC7AC6D7D4D39B2E2CEEF3B36E
-:10FAE000E7F9FDA05653AC7B6776FF7EC593397D61
-:10FAF000C61EC21C4998E52A3BDDC399A9EEA17B2D
-:10FB0000F75B8B4D3CAF991D71A23E903F81CB932B
-:10FB1000EC32CFC5B81FE6F06423DE003C7C16BC97
-:10FB2000BF27FCB69937E7C4A23EFC76FAD92DA8C8
-:10FB300097FBDA4CC46F241CB39B4D77201A86C503
-:10FB4000E702E6C2509C6DA3E79C0FEF0BA74EE6C1
-:10FB50007ED7D879A70FA21F74C34813F9D96F8D28
-:10FB6000D7286E07F4635779BCEE258CB7B5BB92E6
-:10FB700092F0BB3B8F27F27626CEF1EEF8213BC206
-:10FB8000F34BE2C4BEEF5622EB2B7F9CC4E54BCF78
-:10FB90007E00E420F26B097BFC0FD59A23BC0E702B
-:10FBA00083F7FFC5C7EDE97913FE50ED33939D242C
-:10FBB000ECF9981AB2D7D1C708ED7B263C58ED83F3
-:10FBC000FAFDD991E7ED98CCE7BDFF65EF70D467FA
-:10FBD00083FB017F06453ADF003395D2B859189769
-:10FBE0000AAEB62D88F41D9B33629F5BA1CD3628EB
-:10FBF000A4C76EAD36EAA97EE2579F349C7C81D2C1
-:10FC0000B4817F94003D24B2C8FCF2FCFAAA3B0DFB
-:10FC1000F5CE96D5CA7AE41F2DA0AF625C30D569C7
-:10FC2000257DB535F187D3F15C3E69604EBCEFBAF6
-:10FC300013D43EE45FE857C57BACB39B389FF13AE1
-:10FC4000B99F15EC38CFA5888FE966C247A9BF9A3E
-:10FC5000AB39FFB9D8C6F3917B121DE4374D6CE286
-:10FC6000F9C7713ED067717F3378FEB006FF211F60
-:10FC700092FAAD23DFACCB23B61AF28CCD86BCE270
-:10FC80008D13F47C28BEA47840BDEA5760FFE23AA9
-:10FC90000F00FFC13200763096CF83DD8EE56FC056
-:10FCA0006EC7B8C18B6BF3A87C69AD9B9EBFB2B623
-:10FCB00094CA6959418A2B921F999C8F2CA0901F3E
-:10FCC0004FE2D71BC3CA10DFA7F3F65F4EAC7EC06E
-:10FCD000370CDA9365FFB1847F7D755F750DF6AFE4
-:10FCE0004DE3F551CF5E5D83FE9FDE99DA4313004D
-:10FCF000EF524C9EBA36ECFB239B3B927D5F30511A
-:10FD0000DE138B6CBF33FC4482DE9FF314F1892831
-:10FD1000FE9CBB15BE8E3F4E7AF05EA48B41F3CCA9
-:10FD20001EC4E3AC1CBD9F7FF044CE77168B32EB34
-:10FD300015A08F01E02EE9235A7BCB7E4081087409
-:10FD400025CBADF16C2ADDCFAEB12E8894E774409F
-:10FD5000D055D4F11DCC651B1BA2B7168791DE824E
-:10FD600014DFFDA4E9C683282FBF39BD31B20F834C
-:10FD7000351AC9EB20D01BF273B581D39B6AE6F725
-:10FD8000336B0F73FFC84EA42FCC87437A837FCE8B
-:10FD9000F6F17AAA81DE5A8CF4E6D0D35B10E90D35
-:10FDA000C64BF471FD22AEBAEB5BA5B7CFBF21BD48
-:10FDB000FD7A4A90F21A7AB21BD3113E5BC5F7F076
-:10FDC000BE2A1DDE35D1CABFCF7189467E81561C41
-:10FDD000C741FAFC26FCCECAEC61CDE62480DFDC0C
-:10FDE000E402FA0EC1E48943043D1C71A0BF266100
-:10FDF000BAE69C88F475E57B74BF31C5C4E9B7E009
-:10FE0000D937491E64B675CF9B8D74B75A253969A9
-:10FE1000DC57EB548E6F2D0A9F174E2E3D3CAE37AC
-:10FE200042D0A56B758B62477DBC8EB973B3E9BBBD
-:10FE300032F4BD9B7F69FD4F278EDB3A3589D6E5CD
-:10FE40006A7E33D1CBFD6B6968BFD195E6C2FEF403
-:10FE500008BF2ECB101D3DE74F1CC03F7B3EFEF17F
-:10FE6000C80445F209CA03F68AFB9B322E12959EFE
-:10FE70000D7EDCA8FEC34B387C8CEFC74FE1F3B698
-:10FE800008FFAF51DF93FB3F3ADD3B1BF7A7385E1E
-:10FE9000E47EE003CC85EB9471B3BE3C23A91FFA4A
-:10FEA00098BF05F56D33A83243B8BA81E3F5E51F75
-:10FEB000093D714599773E8EBB83B90EA27C73B81C
-:10FEC00079BEC233D3B50A82E7D7D4034BCBB46B28
-:10FED00006C2AB15B3B54503B5B32F619471A1B894
-:10FEE000D6F47966CE179A14C1071CEBAD50DF9A91
-:10FEF00008FCCC857A3BDFB713F8868BEC0CBD1D74
-:10FF0000310B9D91C837908F1070B5B998579920D3
-:10FF1000C60FC9EBE00BA8970601B6774053828F56
-:10FF2000CBEB96C39CAF5881AF505CBA94DB09F21F
-:10FF30005E505CBE9BEC2F551BD87E301BECFBE665
-:10FF40008922EFBD901523DCB24CAE3B27C0F3A253
-:10FF50007B661E9D008F4BEE5B3A18C5E9F81D6D60
-:10FF600015F8BDAF150F9FD9817ED209FF6E63E2F0
-:10FF7000BB6A9467F0779433742E07269FE1FA6387
-:10FF800076643CBE620A977F32CE3A001EFB098F30
-:10FF9000459CF32BE0B1E33C78FC58143CDEF30DB8
-:10FFA000F178EF44D8D7357808304ECC6CED17583F
-:10FFB0008F86B7B36669CF0ED41E163FE0F943AC07
-:10FFC00081EC6719BF34AEA70DE56BEE007EA90D7D
-:10FFD0003B63D09E6D69D8F9327EF7B1A589DBD934
-:10FFE0003DF16E7B29DA376FA8F43DAB68EFA3DDF6
-:10FFF000ED036639730ACF8F3EB4DA169806E364D0
-:020000023000CC
-:1000000038B8BCCD70680CF3C5CDCEA0C51B8FFA37
-:100010009A87A19D614D36315F983F66ACE508C96E
-:10002000E51E90E3481F409F9CDE12F938523E4F78
-:100030005B7D274672D8945E90836174F2F2FE5223
-:10004000F2C3C597EC5D85EFA9355617E2F7B4CF3B
-:10005000416E86CD331D3491F0FAA5F674DD383348
-:100060009DD9BAF6D969DFD1B55F06F862A53836F1
-:10007000BF1728F59A39AE025DBF4411E7F86EDE6E
-:1000800004DD7866F5CB3BC623FD0B3D6232FC8771
-:10009000F4AF1AF405A33E61D41FD824FD3DD53139
-:1000A00066918766E6F9115B999DBE4B017C90BE17
-:1000B0007B501BCA13203A19630DEEBC0DFD2A0BB1
-:1000C000ED6E1F3C6BDD7F595A5D71C87FB6B589F7
-:1000D000FBFD5AF6D977203D6C177429E92B3FFEBA
-:1000E000E4424672DDCA501E1BE955E63B497F815A
-:1000F000F427280DDCCFF0D4D46CA207C97FB65604
-:1001000073FBF7674A204619C1E9D29514FA3E5DA0
-:100110001A537C73387D6B49A254453EAACC7BC5EB
-:1001200071D0CE4EE3F3B19778DE64F38FF17D2783
-:10013000F30D13FE8CCCA4909F02F31356F2F77CC0
-:1001400073C47BC345BEE520BEFEC04C31DF18281A
-:10015000D5464DF8A7BD54DA301E0E658EE28E45A9
-:10016000FFC708D543819604115FCF10F1F43825FD
-:10017000C099C7D7E42363818D625E024BE2DF172B
-:10018000297BCCC154A20FEB4E9447B79E70BF8E13
-:10019000A9BAADF13F7C751A3C6F7F4375A39FF4FC
-:1001A000D64CDFDB48D76640061FF9B53C75786E44
-:1001B0006AA5DD391BDE537D3B9A31BE3BD6EA3F53
-:1001C00048E7B9CE46F41E84F7101FB6C7039D2238
-:1001D000BEA2A76B5C281F48C6318213DC7694A3AD
-:1001E00041ECC7FDCD3AFF67847C13F2979A45BD79
-:1001F000D5B193F4F7F5C956FCE226E6F76435214C
-:100200005EA6C4F2FBB78CC70D86E33FC2F2EDAD2C
-:10021000CEC87E4DD0D7080EC1E6E56903E95D5131
-:10022000E3280E53C09A70E17194B66BAFF407C225
-:10023000D629F7BDDEB15359CCBECAFC4C1F476965
-:10024000605ACC98087194A05FC1750E6FE07196EA
-:10025000E1C25FFF75E3285953BF5E1C45EEF7729C
-:10026000F1EFB980D8E29E31C513E8BC4CA1F58509
-:10027000C1EF21E247841B0245A0FE3D517F754F2F
-:10028000F79F1E857F1EDEFDFC1E2CA51E374FB47A
-:100290005F31FAB30398BB356FC32A11C7D2C71FAA
-:1002A0002E07AB2EDCCF8FDF0B08AFCF33ACA7CC44
-:1002B000AC8F13CC70E8FBCF4AD6B7970FB3F53BA2
-:1002C00037F4CBD37E95FEFBBD35EE76C6BF371532
-:1002D000760EEAF9EB76CC9BC3B88FAB3F9E84C712
-:1002E000013CBF34B3A462C41713E9A5DB7DCBEF97
-:1002F000AA02FA590F7294F362978EFE42718F72BE
-:100300000DF149FAFBA3D1D349470EF9FF87371DF9
-:10031000EC9A3198F5C5016E8FF5BE3109BF17E42F
-:1003200038A7A01E32BCE937D47EE5C29201F1287D
-:10033000B7E950D78CB0EF08E69A3D26B49F739B7F
-:100340005EA4E751F5F9FE7C84F2D672055EC8BC66
-:10035000C0ED98170870CF6D10DF07EE1C38FF4D09
-:10036000CAC3D6B0FC3E4A6670292C7C7C29F7FAB9
-:10037000F9D319F7FBCAF9FAF2020DF3F6C93F27D0
-:10038000977FCF4CF77E312925EC5E86B8C701FBFD
-:100390008E9807CA268B7BB1D1F3D8B8DD59F9D234
-:1003A000DB38FE57B63BA38C3B2D2B18F19ED4A017
-:1003B00089C28F1C13CC44BF418F25B25EFFB39915
-:1003C000B392270F60A761DE2CC232DA3ABF6EDE2D
-:1003D000EC04116F92F156993F2BF362CF973FFBDC
-:1003E0004DFDF065C21F10379951698C4318D73BFA
-:1003F00059F8C7B3CB3C9326D37DAEC8F107D9FFDC
-:10040000ED746B44BFF8FD53059EF4BF7F44F9A122
-:10041000B0DEE4703B48BE27F3F28DE3815D74C526
-:10042000E4307FA0B73997FC7D61F696CC8725FA3A
-:10043000D82AFC107D7460D40B453CC4A817CAF8B8
-:100440008852CDFD13401F350807D4BB302F5DDA2D
-:1004500079329F54E68D625E28C5A3BEA65EF5ADD7
-:10046000DB53CD3329AFABC559F6D237B1A7DAA7E5
-:10047000F27BC2D29EF23AB8DFC18BF6D425FDEDF5
-:10048000A9E2326F2BC2CB68571DFFE987941F0B7F
-:100490007668DBE46F834F18FC53232670FC96725A
-:1004A0005AFAD30E8E34E9FCAEB3D43507295FBCBB
-:1004B00081FB5B32B42EB2D3AC0EAB0BFD2DE61933
-:1004C0009C8E2CF9CCAFF1382FF957645E599263AA
-:1004D00059C4FBA6D24E0C4A3BD1C7EFA7F61CE687
-:1004E00071DB38F4B760C7722ED7A4BFC5922CFC5D
-:1004F0002D867CEC38837FC5E86F7962B2DEDF72CF
-:10050000BFE2BA0D49FDE96D337F87A0F8B77B974D
-:10051000C6A1A9FF8CBFEDBBC2DF728F03D6B7FFA8
-:100520006DBDBFC518FF8A10F722E7D599034F901C
-:10053000DF44C257D2ADF4676534F1EF37CD52F7DF
-:1005400028C85FB63A387C55F4672587FC59CA132A
-:100550007FEAF34BD17DDC7E71F2C697719D6660B8
-:10056000381B23F9B7045C8DF1A88426710FF85B62
-:10057000F267BD63806FE13D4577E2778D8BEFAB2E
-:10058000388AE5B81D370EBE1ACAD287EFACC0F262
-:10059000BF5E0E66A3DE69F463BD821F414EE90FA4
-:1005A0005F231C259E7A1B249E3AAC44B7D51C8E33
-:1005B0004638A56A1C4F73014F4145E8C3BF9E44AE
-:1005C0004E9F1933DC2FA17F6D78BE9945C26373AE
-:1005D00013FF5E9684E37601C7A48665E42734E2C0
-:1005E000E9F0CEAF869FEA14E11710F07B6A5BD189
-:1005F0006D08B7BDF756FC0ECB5FF86F8C43B8EDB6
-:100600007BE8CEEF0AF8A5D3F7740DF05B14057EF6
-:10061000D3DCDCBEFEB8CC9B3805E4C265C021D07B
-:100620001FB2B3BDD0AE8F03E9F969EAB7E49F0A00
-:10063000F6F153F65AEE57E0A74F1BFC53A93E4E76
-:1006400037A9BE13449F19409F31E8AF6AE07A246E
-:10065000887D7F9C823637E7AF52AE21CB3181F067
-:10066000D9EEE471E7087ECA007DEFD7C087D1815B
-:10067000138E772057274C4909C9BBED0D3C8E7668
-:10068000E34CCF2484AB8CAB3D335D9B3C85EE2F9C
-:100690007C6DFFE30C9C47FA1F014F69FF2AE03B8A
-:1006A0007EDFFC52902768FF9B1B8216942BB54D72
-:1006B00037285E28DF9EC8CF3F35CDCB30CEDADF7E
-:1006C0005F178C47BD7DDAC83E7CA808C787B1ABF1
-:1006D0003FB913FD5CD1F021234ABED2F9F1A14C00
-:1006E000275FB7F6E143E38651C9178E0F478DF8B0
-:1006F00020E83FB521780FD2AF59E083D9097C0CAF
-:10070000E0A1221EE487E29E921E8222FFC0089F83
-:10071000A06F44943C84554AE900EBBBE0FC031114
-:100720000F6D11F1506F13CF97ED596D9BA5CF3F12
-:1007300070D3BA673B1A95F03CFE0879B2B7E1F97D
-:10074000C938A78C6B7E5CE6D98CCFA7E5F1730E18
-:10075000468F3305F07E2BA09FD380E777139ECB87
-:10076000FB07428FBB71A6B6159F8FB1FA29CF192F
-:10077000F4BD7BB1BE7DFFA3FC7BBBC20F29F3F2AE
-:10078000BEB1DF2CC1EAC7FB92D26FB635DEBA1319
-:10079000CFBB8E0567D2777E314E817EA7CD36CA1C
-:1007A0006BAC57C0F046BE78A9B76B0AE94D1ECABC
-:1007B000C7F556DA9DA8E7B726CE4A43BE51BB5EC1
-:1007C00025B91ECDBE91F4560BFC86E8AD89F39B8E
-:1007D00054C02FC2379F42FC2603F80DE73F1A434F
-:1007E000BDCE8C74E7E8CF6FB60E00FF0BE43B2F55
-:1007F000E17946E03BAFE03EC3F8CEEFA67C83B89C
-:10080000C7A553188FE788FD633C80F68FF415BEAB
-:100810007FA33EDBB76F3D7D49BAFB5F40679F23F7
-:100820005C23D0D9FFF98674A64E8D4C67E6A97A71
-:100830003A8B99FA8F496799534BCE4F675D02AF58
-:1008400064FEB6D42B2E52BBCEE5E2FCFF8FF3B78D
-:100850006F9FC4FDA9E7CBDFC6DF85F84F8DF9DCBC
-:10086000FFF4A7FEAFF5A7FE78EAB7E04FFDF74922
-:100870002ED2DB8C7ED5BDE3B5B6A903C495259FEA
-:10088000364B3E0DFC18796F2DF033E4CFA9D5BD62
-:100890007F7E86DB9BEE3817F91BEEC0F566087E7F
-:1008A0006DE4CBA077DE39F5EFE86FF87BF90DCB7F
-:1008B000265FD87DFBB2C92EE1778D7CEFBE45D88F
-:1008C000F72D3006DED3DBBEDAEA6F8505A78BF3A2
-:1008D00019D370E5654864AFAFB0C60607B09BE4B6
-:1008E000DF91E858EB7DEE746EF8FE5844B9D5B749
-:1008F0003F839E1C6E37B9BE82DD94324DEF873246
-:1009000037703BD70CF28EE2FA5A6900F975864FC0
-:10091000E9C2D4606F72A3827230B5C143F9F05F4F
-:1009200035AE6FC4A36871FE6F3BAE6FCC1BF8474A
-:1009300089F3FFF754FD772D659C5FFA5F8D71F9A0
-:1009400031D68E7292AF3526FC0B18AC75FF073B83
-:100950006FC3F35E68A77B1AC67C806871FB314960
-:10096000D6605C4EF4F8BDF417DC6F697C19EDF0CD
-:10097000FB9B4D74BEC6BC81FC789E3FFED4AF3657
-:10098000DD47F93F521FAE167CA649B1D2771DABA9
-:10099000FDC467BCDAEE668C27A73A5817EA5947B8
-:1009A000A7727A51D334E233E66A2FE1958C4FD4A3
-:1009B00066F17B733102BFD4918DAFE2F889475461
-:1009C00037C6B7376357E019F1282B518F9860A2CB
-:1009D000BC884EA591FC1E1D8A8BFEFE4762BE930D
-:1009E000F4A3C713DDBF5F80EB4FE17FA7E4D09C8A
-:1009F0006569C807D73737A7E1FDC4E2693C1FF135
-:100A00008E39676B288E9E07FA9F42A5EEEFD9CAF2
-:100A100072A7A688BFB7E4A77C4458F7367A6FA4BC
-:100A200095FC6CAA76F78DC807D451B308AF3B1478
-:100A3000E7C2C5785EB956D2635A73C72D5802FB18
-:100A4000DA90E229CFC6734D1C49FB6C4D1C928095
-:100A5000FAE886F41C9ABF5DF19667E37BE926A26B
-:100A60006B55C4E737E42E7B09FF0E484B8689E1BE
-:100A7000BD83CEDCB3EDD8AF7302FF2338C6F5AA31
-:100A80004EFD3D29FCF011F26F358DC7C55511178C
-:100A9000570D71E5324D917F6783E20E31826FD53C
-:100AA000E6AE5B40DF4F70589D88642DF1C12AC2CD
-:100AB0008FD51686713A66EED0E969B7ADD57FFF5E
-:100AC000C591AF5F4F7BDFFD846C2FF219FA1BB02D
-:100AD000942F9EE845FC407ECB93FEE2783D46D4C1
-:100AE0000316AF2FC2F9FCB3FC67F9CFF29FE5FF05
-:100AF000EFE5FF00834DEAE8008000000000000001
-:100B00001F8B080000000000000BC55B0D741CD596
-:100B100075BEB3333BBB2BADA459FDD82B90CDC8CC
-:100B200096880C421E0BCB488D8D66A595B4322E4F
-:100B3000D938FC98C476D6D8B8E43427559D26B168
-:100B4000135AADAD95254BB62C09829C43CFE9DAFB
-:100B500024396DF00125E9690C01CE1A1C420834D4
-:100B60000A10427A92208CE39496E698828968690A
-:100B7000E9BDF7CD6877462BFFC53D1187F3FC66CD
-:100B8000DEDCF7DEFD7BDFBDF72D0078600180EC59
-:100B900007001D6073912709E500676B200DD5D80C
-:100BA000F74E576841800FE9AF35DB0EF702647CE2
-:100BB000D97EB05E05B30EF8EF43D1B8E88E9B1630
-:100BC0005DF863D21DAC5537A48373E9DAE3DA4CE0
-:100BD00009A029EF3C205DD43CA77FA6E3F8E4CF31
-:100BE00064A8D5E7CEE7FEDEFE6E73D1FA12A8FF49
-:100BF000FF1B3F1F5F979A1E800AD18755B86F6A07
-:100C00009788AE8E7C5040F0A1AF73553A83FF9C1D
-:100C1000901283D5B4BF90C7F806CCE583DDCADA5D
-:100C20001CF965E9CB827CB94D1F9720EF0C9881A8
-:100C3000627A85DF21EF355CF6872812A5DCC3CF09
-:100C4000C1A2170678E6435CDFD1ACBC405B90A53F
-:100C50002B6F5479FC72B5E785A695F8EC15D9F899
-:100C6000869EA5CBEBA9069E00ECEFAAB3EF156B11
-:100C7000DE8F1C5221638FC7FF8F9921E6D3C4A654
-:100C8000FB2181FCFDF9C64F9424F2E881DD2E4B57
-:100C90003BBF7F036902F30DD2DFC07FA77E312AFD
-:100CA000F1E4C7C4F3D40A2D3D84CF87A4F4D03532
-:100CB00034EE2EC15F5B0E85961CF02F5C837CF4B6
-:100CC0005A72F2BAF7857FCA02E693C59C1C392C8A
-:100CD000611A35B4EF3E9B9E6E6400F934BCBC6172
-:100CE000C5904EFB1FFD876FE13A0E1DDDF3E6B7A1
-:100CF000F075A0BE61A419D75360780C99F4F9532C
-:100D0000C78EA1B860A0FE0BA34476DBA8646AF886
-:100D1000DEAF058FC8B447BF64123DE5E042DE4F49
-:100D2000789B530F2624634125ED6F4C02924BA113
-:100D3000E17CEFD373F683FF1F2239B37EE63C4795
-:100D4000BE21F7364CD6CFE5FB2B963E2B383E69BD
-:100D5000D345BE8C7BF59B89CFE3FB644822C9F168
-:100D60005D68145700FC5BE6BE4FEF46DBFE42BFFA
-:100D700097E5301151D3128E9F28D26EDB40FD0AC9
-:100D80008F7184998AFFE3BE46975DCDFBB2E76B16
-:100D90006AD579BEB1C8824AB2471C5719BF6EAE38
-:100DA000FEB9D77FB1FA77B7596AE9FB28107D9869
-:100DB000BCD943F6E4B7C65C234F362EA1F97E2E8C
-:100DC00083D09B1E8817CDE54F3FF9838F64F54490
-:100DD000B5F4686FF9FA9F10F9F9F4594D4F99D5A8
-:100DE0000D340FF410DF97859DEBB3C77DCE92973E
-:100DF0002F0D196F31B519131AA89D32256CCF6EBE
-:100E0000FCBCB6569F7F1E1FE4D0AD267AC0FBF611
-:100E100042829945723573E4BAA7B0E10E924BFF56
-:100E20004D2AB0FEB9F97C9EBEAA648E4BC5A40FB4
-:100E30001F61FD48A27ED4221D6FD8A987F12756D5
-:100E4000C27450C829C9CF6326C96959AB77D67F08
-:100E5000FA73FC25E8BB7F2323BD7B63AA3E84EBAA
-:100E6000BC37BEFDABB7929D3F2F1B12BFD7D91F1A
-:100E70007EC19A034627581F4AAC7367E7B17B5E71
-:100E80007B8E6414535F27BE911DCFF245F867D364
-:100E9000BF2A3BDFC1E693834B910FA9C1FCF4EF5E
-:100EA0002CD33F47FCB3F93C1FDD59FFBDF3F86479
-:100EB000F4FA6C7FA4201188A01C4682063A017ABD
-:100EC0007F82DFC34AD4CBCAF9E5891C65FEBC46E4
-:100ED000FFC471DD51538B605F3E864B5F8E7EB1E8
-:100EE00048BF793DBEEA287F7D13F17F5BD0A3C95F
-:100EF00039F6D5B7DF0B99203102E745BD5B07D343
-:100F00009BD6E338A8F1B29ECBE52BF8F9D6A2B870
-:100F1000E2C1F6EAC8129ECFFEBE1BEE5376E0F3A6
-:100F2000E55EED15D29354B9442BC2E7C8405CFA94
-:100F30005A05CC626CBBF4889FCEB5D8E33411401F
-:100F40006B68BC9CCEA586C70E5525C8AE93E654EB
-:100F50001DCA276489EB5ADF54BC1DE9F5BD201B6F
-:100F60007BB01F0A6E5F07A847D22341F6137DE8C6
-:100F7000E77D287725D8F9263D5F7306209AA34F91
-:100F8000AD337E88E6F8BD0852CEEDB7FB2B1DE3EE
-:100F90003BB46AC77B194C23837CEA0A2F738C2BE2
-:100FA0006A5AA9D17ABBF5158EE737D5B538BE8711
-:100FB000A872721AFBABF13F92BB0CA2CFEFAB0948
-:100FC00027603FE77B0572FAF87E6DA4A8FC341D0C
-:100FD0004A37C00D6447289723C3E47F36F8F9DC0D
-:100FE000EAF3C231A904C8F493D048CC36F9BC97CF
-:100FF0002C7D4D46AA594E52F099F7590F1F9FF676
-:1010000010CE82C7A091FCEBDF6AFA710F0EB99285
-:1010100048E2F76154741DE584AE3A1968E4E7E6E6
-:10102000D2523AE7A46437F617E1B8B05045789643
-:10103000C6F961F757C4385844E3344856615F3302
-:10104000A080E45A85743E5BCADF25BBADEFAE12CB
-:10105000DF254B4A05FD86463E47331DD81E060355
-:101060007CEC7FE2089AC88BF4707B15AD0A9F3F39
-:10107000084623F56B619AFD148A5FA2FE4298D45C
-:101080008493CF08BF3DAD844EFB85DFCF672F59DA
-:10109000BB51E0B42D0F1C7C55ABF925B2BFDBEE84
-:1010A000683A27EE50763EEDB0DBEF4474711EEEE9
-:1010B000EC623B51763EC3EF5F8AC4F7901D12EBA2
-:1010C000FD8D73F9DDA06680FC572A02461249A403
-:1010D0001E5D1BDE82F24D3EEA376AE1F2C9E36231
-:1010E000E59006AD80F82AF75CAA1C80CFF9E031C4
-:1010F000FFE121564693CFC93F402EDFBA14B9B85D
-:10110000E501F79401B49CDF8F3E206502D252E6E0
-:1011100087196ECCF21FFBC96516BF4A2D79C8A28C
-:10112000CDC8D673A5747EB910BDB2D2AC7CCE2723
-:1011300097701CDF3766E523F798CC3CFB9CF6C123
-:1011400019C6B74B2483E5B5548E7BA85F28652C60
-:10115000D093E673BD183496CF15D0C36DB9777AA6
-:101160000BE3E19D3811E1D90FF094CD89C752C14D
-:10117000367F35F9D73AC5F060BFBEC8134F231F7D
-:10118000AF542043FBAB542049FE1C9101D34F3D8B
-:101190008AA7159E33293CA63DF4DD2E7F3A2565AE
-:1011A000E76FB0FCF64F8ABEA94DD767F97C92FC79
-:1011B000D772C10F0FFB9FC90C7D1F8E81D1A7CFA6
-:1011C000F567382E295B7E8ADACDF4A285F9962C54
-:1011D000C6BE34F8C3F70967103D05FBDF8B24DE7C
-:1011E00021BD219C1E2C65BF345D48C07A2E2E3057
-:1011F00009576CB1E6D970A3BE388EEBDC32E87BC0
-:101200009DE841CAE7C405EEEF750972BFB7BF9B01
-:10121000D52BF7F7976807B0B3E2827040E491D519
-:1012200025D37970FB2CCE243B29CBFD4EC8492D0C
-:101230004F30EE50C95ECACE4FC7EBC22F361D2FBE
-:101240002A2ED1F15AF8C53EA7B6C319AFB2D45A67
-:1012500027F26B2BD87FE5CCCFCD16FF3E4DE7555F
-:1012600031F1130315DCF73688ABA4B77F86109AEB
-:1012700070FC927DDB8A192F405423FE48998FCA57
-:101280001F5E7B117CB4F8B439F3A65727BFB4B303
-:1012900008DEC88DDFACF7EF6CFC8488D3FDFE1A46
-:1012A0007F4E7C5878EC835E72EA7B0AFFE68556B7
-:1012B0005C7AFF4BB22157D37B819B0320CEEF4258
-:1012C000B2535C77E1E3A7FF87C617BA7035518642
-:1012D0001CBA9EC2FD8C670B8B559D71B64BCF6CB3
-:1012E0001C0D1F081C1CB4B897435722BC6CC73D8B
-:1012F0004C579A3BEF75163EC757910F2F00CFBB47
-:10130000713ACCE273F13E1854859D609C9971C48A
-:10131000C17A5E3BB3D76D7F57A1C6AB8DFA3CDF78
-:101320005B72A8A7401CFDC2C22A48EFC6F50E0E8C
-:10133000EE8814627FAC02748C3061A0F38B12E1F2
-:101340008DB672A14AA166810B690AB0E378FC0BE5
-:10135000FDAB3E5487EFB757050D5C192C7C0B7124
-:1013600032D2B9ABCA6F98F82005E27DB2D923E238
-:10137000C924BC4C78749B251FEFE30267B26CD084
-:101380000EF7B7097CB5EDD867D7917C474A6F3126
-:1013900032386E1BFAA732C263A35EC67388EB1C99
-:1013A000B8DFD79C8303F1FFBB0E791D7DAF0B2700
-:1013B0000EB7210E44FDB671E0FD6DC07646EBA27E
-:1013C000F3E472CD03C172F6A7D729539E7CF93797
-:1013D0005B1E36FE7EA242F0D9FBAEE00B06CC3B94
-:1013E000E8B9EF5D118FA1030F362DA0D35FF0CFC9
-:1013F000D784FCA1A7EF8AF300BFE4759BF81FAD6B
-:10140000DB8D877D2E3CEC5EAF2D87476CFEAC827A
-:1014100055C41FC4E78C13ECFDB8F7F138C6E7518B
-:10142000548A277BFDDC667A356E9FEA0D737BA2BA
-:1014300057872802B0677AEBB87DB6D7E0E7CFF5DB
-:1014400036736BF3612E7F445EF32A6BCD4AFD54F5
-:101450009CCED12BA21E3685B17B3CCCB7B3A89FC6
-:10146000647CC506E5DE707CCC93A690DE8E7F168C
-:101470005AFA7AADEFCC711F8E1FA904630F7EBF9D
-:10148000B0793BEBD99A339EAC9D00C539058E3CB3
-:101490004104CA1CFD76FF958EF11DDA52C7FBD2BE
-:1014A000C834FBA9AEF0B58E71B69CFF8EE22C5C01
-:1014B000DF58F4A4467CEDD6AF778C53EE41F93774
-:1014C00050FCF351075D90D719E4A74B373AF5B0BC
-:1014D000D82557F5EE73C741B69CDF6A73C643F350
-:1014E000C9D7ADAF365F4B67F92AE2CA14C595C8B4
-:1014F000D7524DF0D5DEEF88B55F7B5EA559ECEF96
-:1015000072C797C5145F56E78B2F4F597C3E4F7CAF
-:101510001973C6976EBE9E2FBE5CD0EEF42B17CA11
-:10152000CFCD8B45DEADF47999E31639D6C3E760AC
-:10153000D9946C74914BB4705911F9001CB7B94926
-:101540004D13CE1C83E9309DE70725E42AEA5B5959
-:10155000BD51497EE6E190F1CA06C28DDD220FF849
-:1015600074E4B630E18EFEDD87C37858414BBB870B
-:10157000FDDD68E434E72F141D387F81AD99CE83FB
-:101580004FECF176BEF1E026352DE1F88356BEF141
-:1015900060F76CBE91EB1B134D22DFF827EDBA9577
-:1015A000FF4B86295EB977D3AA4A3EAC14EC5F475D
-:1015B000C30DB693A180564C71746A9347A37DC93D
-:1015C0002BEFFF3CE9C701A9675F0DC56F151ECE64
-:1015D000BBA642AB2AB7E0387933C218EA6F5AF596
-:1015E0002AF9EC890A7D5F0D7D1FAA61FEF5AFBE69
-:1015F000CD4FF38C841674537E64A4C3C332920916
-:101600006714339DBA73C53DEE3A804C1E97E2B71E
-:10161000724F46A5F38AF0474EDEDF96FF5048E54D
-:10162000FCECD6F6870E276BF831FBAF85765D664E
-:10163000531BE799CF129E90E6AFCBECB5F29DB36A
-:10164000E74ED8B99E3CF3302EB0EB12F4A7DB790D
-:101650005AFC4BDDDC99A673741CE231F29FC9E0A1
-:10166000B9EB204AF0DC7590F9EA1EBBDA451EF5AD
-:10167000CB2477915F74D44B94985517B1E2D783FC
-:10168000940F277D70D549EC75F459F452B37AE480
-:10169000AA9BAC562D7A06E4CB5FFFA1F593FBDB4A
-:1016A00045BDE662EB26DF6D07B15E2BDFEDB5E4ED
-:1016B0007F8D3CB983F4F18F9DEFFE6EFBE5CD7716
-:1016C000CFAD13A5D95EE0D89937D8AE972DB0F03D
-:1016D000CBB9EB404304F4517EE32B109752FDC38A
-:1016E000EA27AF1374DD75A1809547F951FB5211BC
-:1016F0006F913F21E12AC662E26B50F97652C37DB9
-:101700001404C72084ADAF7C4B92DAD6C53AD78794
-:10171000C69779F8BC1A2F4A1CEEA7F52F0BE6B531
-:101720008B572DFF3768D56F48813D646F926D1CD4
-:1017300090F0A09C2640C8F9ADF6108F57B4D1E6C2
-:101740003B516F4E913E54F07EF2D67F4EB78BFAEE
-:101750004F0EFDAF939EA62CE244670BD2F90F4BC0
-:101760001F810E8E0514EC88F9FCFA6833E182DFE4
-:10177000B56BE2BDB2C2207B180FE59FEF77D67E36
-:10178000805231ABB2F868E1464107FCE2FB83D2FC
-:10179000990D2757B25CD99E681DF4DE5DFF72D3A8
-:1017A0000FD439E31BB5CA39FE83D97D38E3A203D0
-:1017B000F3D4C7164585BEB62E167A46FAB1278FE2
-:1017C0007EB8ED5DA5BC27C553D190359FF03B4158
-:1017D00065AA8DE29D603D185C53548EF37EE34F05
-:1017E000D41C9B5E497EBED8A03848F1A3AB6CCC1C
-:1017F000C689EE7D9F2FCE5314487A1BE7C67B48DF
-:10180000D72C6914E74C3287DE5551A127726E3C04
-:10181000584DE1887E33D7F1A80E48FD5DBE0DF925
-:10182000CEE9DA76EFAC9FCC57D73914C73882822D
-:10183000D447F6EFDB8AFD77348FE6E3317ADEBA00
-:101840008E66F567EB3AF10BABEB8C464BBB6B2E20
-:10185000A6AE330FDDD9F3786E5D271AC57D8E05F0
-:10186000457D65B6AE734BF905E573C03A974B2DD0
-:10187000BF5CD46DC5113B258E239E6AFAEDF072D4
-:10188000D2B3262FEB01EC9F805C3B59B751FF5A36
-:10189000199D33AFFAA056F83593E8D971B1CD3F11
-:1018A000D5A2DFF6D0F30A8D1FAFF4AC627A90F1C7
-:1018B00079B8D89D54AD56A676B99A914B886E29C1
-:1018C0005875F48C44CF23C8ACDCF86064E6C5F6E8
-:1018D00012CA9304C120173412D17697D03FA80AB8
-:1018E0004478A75A4F93BF6DF7173AFCFF48B72AC1
-:1018F000FC6BADB82F337E5CFFDA361C3FB033C0D3
-:10190000B8E9409547D85752E27A7287E68C7BC691
-:101910002797083CB6DF6BD03D91A39362FCD6C8F5
-:10192000AAB4CCB8DB191775EBCEB8686B65E32B9E
-:101930008417A1DFCBF978CDC2B537D539E3A4A29E
-:10194000EA9E6709A76CEE1778786FB874C156F4F1
-:101950007FBF8AEA8E38714BFF5D5C37EA5781EBB7
-:10196000A9239B54B68F11EFEB87B6326E2C603EE5
-:101970004E6C522B1339F652D6E1B3EE4508FC817A
-:10198000F0323199E77D5987F03BA8D87C8EDBFA9D
-:10199000F2A79F117C2EAE82B44E38AE7B4786E212
-:1019A000CAF12ADC13BEEF0FD7741FA7F95F968127
-:1019B000F6E9D6C3EA8E5AB6D3D9F3B4D9E3E093A5
-:1019C000D717EF21FA7013E8E4D7A231EC531E6069
-:1019D000A30A941FF085FF8AF75B8AFD00F6FDB12C
-:1019E000D1A4827D7F4DE27AC2C54FEFBA7D3052DD
-:1019F0004EE79DB06FDFC6EDF14FD0F8955E08D091
-:101A0000FA4097C2B4BEA4B8CFE0B687BDA91F44C0
-:101A1000494E7B0D8945B4B97BFDDD7C6FA9BC8047
-:101A200071D3A837BE85FDD1AD7E2DC967E034C71F
-:101A300011DEAFF880F46E62D76F2A087FFF382A74
-:101A4000EA9A01DD195FFB6194CFEDD5E6D446FA41
-:101A50006E75B34A150F78AAE534CB6DA2C967F845
-:101A6000701D132D12F3F9BD266F9AE679529D92DF
-:101A700069DE27DFC3B9ABF3D9777EBBB2EDC83DD2
-:101A80007EA479BD9FF4622F4CDD42FC49CE883C98
-:101A9000957B5CBC439C577B53B7D6299CCF52B9EE
-:101AA000DEAE9C31CC12A41E9A89FF3DE55E9351B7
-:101AB00045C449959EA484F406BAC5BD8C81A2C4D0
-:101AC00020E9F300EA3DC749E5E23ED27865B93145
-:101AD0009433DF78CB6D75E4CF5E680A30BEEF3BA0
-:101AE000F1177712BE6F93DFFAEE23145755A92C26
-:101AF000CF016FCFAB1407259B02BCDE138B54F0D4
-:101B0000933F28BFF3418AB3E1E846C8D5D7899807
-:101B1000B0D3892A61F7D2231B390E189764E6B334
-:101B2000597144223CE68BD9792791678A58EE6C2B
-:101B300062E377380F7545B7C8A3466256BE490EB3
-:101B400026592F6F083C48F66F2A5E477CBCE68C0E
-:101B5000335EBEC2152FBBF351FF1BB5F21156DE2B
-:101B6000C9D6CB626BCC44B3E5A757FAD2420F7B00
-:101B70002AB5FAB9F6FDCF167E9EEAF5F33DB21707
-:101B80007B35EE179B6FEF2E433A2FF786F9F9C797
-:101B9000561F9672BF1B5979AB5F677F321D26BAFD
-:101BA0006E3FE2D68BA16881E33CB1D759D4D226EF
-:101BB000EEDF9D618F0C6B82D3ED7C36C254301703
-:101BC000EF677AC53DB7A7AC759EA075FA284F267A
-:101BD000D6F76CAFCEED73BD75DC6EEA00510FB079
-:101BE000FDC355E81F900FD12AD1277F40F22F2D3A
-:101BF000BF93F364BEB0A291BDFBAB4633528E7F60
-:101C00009828EAF9C55DE4F72B82AC8FEE7DADE94B
-:101C1000F0E4DDD7E6961DEC77CEE23CC47FF433EA
-:101C200077B31F42BFC0F36E54EFE07598E897D8C2
-:101C30002FF47CED76F60B5E203D77FB81D2A4B0CD
-:101C4000EF842EF277F63DA159BF80F3A4719EA7D1
-:101C5000D0AF537F00FD00CD33D0F2FA9FD3BCEF5D
-:101C6000BD5FC0F7A22636BDC27EE185B3E8B32FC3
-:101C7000A35FB0EDF0B5139123B9F17C56CEEB6FB5
-:101C80003F26F8A181E0EB86789E38F162E50CE60C
-:101C900085E198B4327D87A83BAACC8779EB8E4941
-:101CA0008F416981BE492566D51D81EA8E76FD3159
-:101CB000A7EE58E0AC3BAAE914E39BB45577BC6DA2
-:101CC000ADA83BAA05D3C1EC3AEC7A633F3DAACC60
-:101CD000D6E7EFEC48ECEA68CAD6197549D4C15F7B
-:101CE0008A985FA6E7505ECAE7BFBB4E69D723114B
-:101CF000DE49899CFA66033EF79766EB5FEE7AA6AB
-:101D00007D2FA3419D3E328C7CE9BBC3CFF8C15EE1
-:101D10005FDFA37FF26AA23C7B1FC0AE77DAF54C8F
-:101D2000BBEE89EB1ECB5D373C0EEC77E031FF61FB
-:101D30003ADFDCEBFD5E24717F47459E755F607D79
-:101D4000711D58F41177913DBF66F1D11EF7906572
-:101D50008FCB5591DF866295E39DB687822013CEA7
-:101D60002E528F905D6C81E90EE26F5F48E0BCD42B
-:101D7000012FFBC9A31D3ACBAF4235F93E44C597AD
-:101D800003C66E24933AAE1553FEA93B6A1EEDE0DE
-:101D9000758CDEB29ED681B89DFCDDAF6BBF5ACE8E
-:101DA000F57EBAF75442F19FB198F220CF77E4BFA5
-:101DB000AFD4BAF8CC7A9EB7C803149FA502C6B3B5
-:101DC0007CAFF80985E9752309B391EF2F45D5520A
-:101DD000A223EEA7F6054FB2BC5A6B7D2B38AF5746
-:101DE000943F0E7CA643C4AD6B91968A743ED39605
-:101DF000F801AD9B72A561D66311DF3D4F7E52F8AD
-:101E0000AF7B3CABB279B01239F13C8D87A39242E3
-:101E1000E7A3CFD21B3B4E7CBBCD7C81E48EF2305E
-:101E2000697EFB1E903DFF4B961C921DE68B34EEA7
-:101E3000756B9E062D19213B6C48A03E486C3FAE49
-:101E40003ABCD00BB7BEDAFA365B87B7F450D2444F
-:101E5000BD16F5EA755EEF93FA718F44F5F6C4E1AD
-:101E600061FAF612EBDD57B69B6FD2BA4BDAE2FF9E
-:101E70004E747FBDEB76BE177CA1F7385A17F784F6
-:101E8000A98E3F1010B8F9E188E1F0778B3A857C94
-:101E900016750ABC742DEACC14DF2F35F8DE37C076
-:101EA000DD8CA36DFF34DA9BF8FEA9DAECF7A95EAE
-:101EB00098A47AD07CEBF0EEDBC179DDBEAA363F88
-:101EC000F91FF46F25D41FA832C3B9EB4815093D9B
-:101ED0004F2E12790BCAA72573EE939776CABC9F33
-:101EE000F62AC890EEF882A2EEE643C3D5F1FCF1E3
-:101EF00099CD7CBF189F4F528AE18A4E5DC4E5E5BB
-:101F00000698146F56C581ECDBA765BFA73A6A7BBC
-:101F1000550FDFB79C8F8E1CB6BF4FF0F737766A30
-:101F20004C572DF738F200E7E39B9B2FFDC4B7DA3F
-:101F3000F9F9A65E30DF84DDB9F9B5CAE2D7D3A1DD
-:101F40002FF2FEE08376B6339F86FBC47675A7F04A
-:101F50002F72D0844411F9A8382248CAB3F700D5AB
-:101F6000A16D3ECB9AE0B3ACF5F077BE2A0312D751
-:101F7000115F12CC17371FD04F00F9891F3D7AA887
-:101F80009CF0692BF6C3C27F800FDB073A845C6C40
-:101F90003B5D073F0D8AFCB7F3BC70FB53BB7DD89C
-:101FA000CA3FBB9F4B5D01E13F7470F0BDC8FAFDB5
-:101FB000C291C146C607787E26E95E4C67656D0111
-:101FC000F52F771DD15D3F74D709DDF5C1ACDE98E3
-:101FD0007E5AE73BDAC9E4C7F3E88BDD0E5BF6D641
-:101FE000DFEBCF6B77C368EF24BF8116334975A34E
-:101FF000BDA1E930EBCDF13719172BCFCB06E14B63
-:10200000451172EE5C34CD72EC6A3681EA4DC3BD87
-:102010001BBE9D4BF781B6C4573A514F0AB5499341
-:10202000E8042193A4F3676D99D9930F370D587E77
-:10203000E4EDB6F86EFA8EAEAD93FC4F45CC3DD4D0
-:10204000BF50BF359F3D2936EF2EDA9E4E0A7B6A80
-:10205000DEC1F63452D5C3386BE4A73221A92C8EE9
-:10206000B4EC69A4E534DBBB6D5769DBFF340BBB13
-:10207000A03C029DDFC55526FB8D6F5AF6A4A09D9E
-:10208000903DF92C7B2AD6B2E3293FDE4E7CC6E791
-:102090004AD5347F57DC6CD91FD95390EE0F03E338
-:1020A0008001B43BCA8BB8EDABB5469C9B8FB7257E
-:1020B0001EEE247CB1683DE7E507AAFEB38CF18BE8
-:1020C000A5FF59BCDBC8E7F9D9418F41F6D04000E4
-:1020D000BA316B07F6BE57CFC89041D1AC9991B8D1
-:1020E000BD71A690DBD69900B7E64C19B79199104F
-:1020F000B76D335772DB3E53C96D7406EDE07AB4A9
-:1021000087996A6E3B67AEE5B66B6619B7B199EB16
-:10211000795CF7CC0A6ED7CE7C94DB9B665AC43CC4
-:1021200075625F79EC81CA6097C11E8C2414911D81
-:102130007CE655F6EF9ACA779452A1555C27F229AE
-:10214000D36C0F479A85BFEF0A0A39B9EDE1EDB6B6
-:10215000C4AFF2D9C32CBE554023FEAB60FDB9F02D
-:1021600003E29FDFD0F736EE55C326EB19E293D397
-:1021700024CF4BC509B33873B1CA78D4C699238B21
-:102180001067566771E6408B88CB52077C1CBF6D89
-:1021900095C4FDB22BDB13FFC5F609224F94B8C5D9
-:1021A000AF116E4E853AC341CAEBED9581F20588B9
-:1021B000433EE0752A71719FF502EDF95444F87DB4
-:1021C0007B7C039CF4F45C048EF935FDB3657EBF23
-:1021D000507AA9E7ACB75DF8054DF8855455CF2086
-:1021E000D7A55D7EC13E67911F0EBFB0B4CBF20B89
-:1021F000969D975689F3B294FC02F2675997ED17B2
-:102200009CE7AC62E390988D432CBF1013DF216EE6
-:10221000779CB3286E3FE4E062D4A3E55D79700853
-:102220009FE739E75C5F4D6D847E4B103A03115296
-:10223000CFE2197DAD91E7DC49698D6C07C79576D2
-:10224000C8CDAF5CB49D85EC73C7E473C73DCEB613
-:10225000B781E3DD629FD639741CF76FE6D85B97D0
-:1022600026CE233C7F6EA27DBAEDAD75B19988E78D
-:1022700059E727BB04DEFFF11A0BF722AE34828C3C
-:10228000EFF3E2864F92FC9AC4EF341E43FFD31162
-:102290004BA6149DEDFC9334EFEAE8944C79A01B17
-:1022A0009B475FA69208DAE9A7BA9A2EDD4E9BDB20
-:1022B000AC7ADFCE3271D9D96ACFA7FF362EB2ED14
-:1022C000C03DEEE16A73433E7E3C63F1A36FD0D321
-:1022D0004D17FE6CBD38AE2C65FC93C7DF9AC66502
-:1022E000F1B717863F8EE33948723F07FE18CE27B5
-:1022F000FFF9F0C778D72CFE182339B5D60BFCF1BF
-:102300004C179C33BEB9645C1139C97CBB545CF179
-:1023100050D7B971C5B7BB84DF54B469F61FC597F0
-:10232000882BDC7E02F1C33F317F0C71EEDABF37C0
-:10233000E10B9439E717FA99EFD338C20D7479ECB1
-:1023400048B02D29B11DC49FA0E7A3E612D6A3CBA8
-:10235000650F88137FD895D33F9F5D5CF0B8C94D5A
-:102360009C07B4EB99BF0F1437507E64A75FB45F2E
-:102370002A283E42ED58AFC843EFB7F27E635EE0D5
-:10238000FA41BF54601C91E8BBC569916FEF594E8B
-:1023900079CFDF76D9BF97ECB9817F77037FEDA83E
-:1023A0009BCEBF2E71CF97487DC8F7C1AB34CEA36B
-:1023B0005B7CA174109DD343CBFC8C03873A8E1EAB
-:1023C000BA93F2321D220F860A51FD713A7F11D65F
-:1023D00034E79C0B3228A7293F3F4877DB19746C00
-:1023E00010F7A035F1BE348AF17B6EDDCEB8DBD1BB
-:1023F000072B5F6AFF3EB070CD7ADB4E988E6D275B
-:102400008545939A96E36F067B9DBFFF76B772ED85
-:102410007D71BA9B3C5AEFE1FAC5BE1A2540F5948E
-:102420007D7522CB3E5CE389E5AB8F5F1B931C7906
-:102430006DBBBE5D1011EB9A6FBE01D77A7C7ADC62
-:10244000243D1DD6D371FE1D725DB994CCC93B7B72
-:10245000AD79862423D38ACC1C2A12E785AF2A09BA
-:102460001EC203A1EDD7138FFD553D703A48F737D3
-:1024700092F006B6A1523591CEE38796C7841F1A13
-:10248000F24EC6588ED77938DF8B982A6F9E6C61D2
-:102490004CF8E9E19A23BCBE24F285EA55EE7101BD
-:1024A0006B5C813ACAF58E7DB5DFD4695FFBE807C6
-:1024B0003757A07CBBFFFBC1DD41D2DFBB394F33B7
-:1024C00046F91AF4A705D71C8BB521DDFD372A1A6A
-:1024D000EDA343AEDA4DEB1A8D82C17500975E9481
-:1024E000AC51025C2F353D7C07D4AD2705C554198E
-:1024F000213D9CF20BFD107A16B4F4E68021EA3EF1
-:1025000007A2A27E65CB2FE77D80EAD267A30AC728
-:102510002576FD8A6A3DF970DC7ECB2EFB2DBB440F
-:102520009CCA7587D9F78B337CEEEC6FC984E99C24
-:1025300029D2FC468CE81E75AE6B6FD39403971CB2
-:1025400058F1A2DFBA8CEF5A9FD02FE5A95FB03FB8
-:102550002D52A6F8BC2A5A7D8AFDE97DD67ABA9A10
-:1025600081F759BCD2F2DB713322E8FDA5C30F48D5
-:10257000D7BC6A7AE95CB855DC49F0368BBA5D8124
-:102580000A4606F97CA022C8F79ACA565A75BA7547
-:10259000E25E857D2FBC22EEBC1716829CDF0954BB
-:1025A0008B7B59B97D90379EF3FEDBCE5F1E7EEEAE
-:1025B000440EBD2FC59CF7C7CFF7FDEF7BD3CF9D52
-:1025C00040FD1A35CE6D87B6BCEEED6D667ED9FA4C
-:1025D00068EB6788B6D838FFF763A178DEFACC31AC
-:1025E000CB0ECEE7CFCA7CF11EC245F7AD893BF0DA
-:1025F000D103967D3E1013F94F75F119CEAB1DB482
-:10260000EE5F1D0CC086EFE499371353797C56FFBB
-:102610009D38C2D69FB97C380F8E5813B5E2104F43
-:1026200080CEF151A3ED59AA47BEABA93AE4F80117
-:10263000779EDDC61105DD76BEEF3DC65125C12969
-:10264000A1B72B9D71871B070C2BE90D64E7C375A0
-:10265000AAED9FD88F5CFD6CE1D7938C939252EEDC
-:10266000B9B93F7307D30DB9F2EC50EEFCDDCAFEE9
-:1026700018F07A42FA9929BA671E8A29E2DED6A8AA
-:1026800009B9F76EC63CBF9C3965FDFB031B77B0EB
-:102690003EEF9FE2DFD3C0172077FEBD1FDBCCBF2C
-:1026A0002F399FDC67FD7A5875E4DF2ED62EFE2584
-:1026B00066D5B7031020BB380BF770DD1D46638E5F
-:1026C000F3882B100BF8C8167FB84D6595757449C3
-:1026D000597B817651D73F9B98F58B0A7D67589F30
-:1026E00055D2AD0A8AC721C3BF53B4EF959E855F0B
-:1026F000F2BCC9A7246916675D89E13EFDFE712918
-:10270000A99CE6A1D6BDFE2560F0F31A88737B353F
-:10271000F4705B07A3DC5E0393DCD6C314B70D70C3
-:1027200086DB15A0CB34C9F560CAC0573513DCBFB2
-:102730000192DCB640E2FD53B8FEFE8AED2B385E16
-:10274000B4FD87C5279BCF79EC9D71A4CD0F9BEF7E
-:10275000FF48CEFA02EC3915127EB87D6586F53C4D
-:10276000181438D98EAF6D3AF3E1DECB85CF6C5CAF
-:10277000F97FE7ADB141E048000000000000000033
-:1027800000000018000000000000000000000040F1
-:102790000000000000000000000000280000000011
-:1027A0000000000000000010000000000000000019
-:1027B00000000020000000000000000000000010E9
-:1027C0000000000000000000000000080000000001
-:1027D00000000000000000000000000000000000F9
-:1027E00000000000000000000000000000000000E9
-:1027F00000000000000000000000000000000000D9
-:1028000000000000000000000000000000000000C8
-:1028100000000000000000000000000000000000B8
-:1028200000000000000000000000000000000000A8
-:102830000000000000000000000000000000000098
-:102840000000000000000000000000000000000088
-:102850000000000000000000000000000000000078
-:102860000000000000000000000000000000000068
-:102870000000000000000000000000000000000058
-:102880000000000000000000000000000000000048
-:102890000000000000000000000000000000000038
-:1028A0000000000000000000000000000000000028
-:1028B0000000000000000000000000000000000018
-:1028C0000000000000000000000000000000000008
-:1028D00000000000000000000000000000000000F8
-:1028E0000000000000000000000090000010000048
-:1028F0000000000800009008001000000000000226
-:1029000000009000001000000000001000009DA8D2
-:10291000000000000000000880000000000000002F
-:102920000000000080000000000000000000000027
-:10293000800000000000000000000000000091A0E6
-:102940000000000000000008000093C00001000427
-:1029500000000001000093C8000000000000000219
-:10296000000093D00000000000000008000093D495
-:102970000000000000000002000094980000000029
-:1029800000000008000093D80008000000000008C4
-:1029900000009B3800400000000000400000941838
-:1029A0000008000000000008000094580008000023
-:1029B00000000008000094A800C800000000009873
-:1029C000000096380098000000000028000096786B
-:1029D00000980000000000280000C0000540003002
-:1029E000000005400000CB200008000000000001AE
-:1029F0000000CB21000800000000000100002008BA
-:102A00000010000000000010000020000000000086
-:102A10000000000800009D600008000000000002A7
-:102A200000009DA000000000000000010000000068
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50008000000000000000000000008000000076
-:102A600000000000000000008000000000000000E6
-:102A700000000000800000000000000000000000D6
-:102A80008000000000000000000000008000000046
-:102A900000000000000000008000000000000000B6
-:102AA00000000000800000000000000000000000A6
-:102AB0008000000000000000000000008000000016
-:102AC0000000000000000000800000000000000086
-:102AD0000000000080000000000000000000000076
-:102AE0008000000000000000000000000000000066
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B20000000000000000000800000000000000025
-:102B30000000000080000000000000000000000015
-:102B40008000000000000000000000000000000005
-:102B500000000000000000008000000000000000F5
-:102B600000000000800000000000000000000000E5
-:102B700080000000000000000000000000000000D5
-:102B80000000000000000000000000000000000045
-:102B90000000000000000000000000000000000035
-:102BA0000000000000000000000000000000000025
-:102BB0000000000000000000000000000000000015
-:102BC00000000000000012C800800000000000802B
-:102BD0000000000100000000000000000000A00054
-:102BE000071000000000071000001EC800000000D1
-:102BF000000000080000AEC000080000000000084F
-:102C00000000AE4000080000000000080000AE8098
-:102C1000000800000000000800002008001000006C
-:102C2000000000100000200000000000000000086C
-:102C30000000A01007100040000000400000AF405E
-:102C400000080000000000010000AF410008000083
-:102C50000000000100001ED0000000000000000184
-:102C600000001ED8000000000000000200001EDA74
-:102C70000000000000000002000012B00008000088
-:102C800000000008800000000000000000000000BC
-:102C90008000000000000000000000008000000034
-:102CA00000000000000000008000000000000000A4
-:102CB0000000000080000000000000000000000094
-:102CC0008000000000000000000000008000000004
-:102CD0000000000000000000800000000000000074
-:102CE0000000000080000000000000000000000064
-:102CF00000000000000000000000000000000000D4
-:102D000000000000000000000000000000000000C3
-:102D100000000000000000000000000000000000B3
-:102D20000000000000000000000000008000000023
-:102D30000000000000000000800000000000000013
-:102D40000000000000000000000000000000000083
-:102D50008000000000000000000000008000000073
-:102D600000000000000000008000000000000000E3
-:102D700000000000800000000000000000000000D3
-:102D80000000B00000180000000000180000B300B0
-:102D900000400000000000400000B30000400002BE
-:102DA000000000010000B30100400002000000002C
-:102DB0000000800000400000000000408000000093
-:102DC000000000000000000000008000000800403B
-:102DD000000000040000800400080040000000041F
-:102DE0000000BB0000280000000000280000BC40DC
-:102DF00000100000000000100000880000800000AB
-:102E00000000008000008800000800800000000230
-:102E100000008C00002000000000002000002008BE
-:102E20000010000000000010000020000000000062
-:102E30000000000800001108000800000000000861
-:102E4000000011680008000000000008000011A840
-:102E500000080000000000080000127000080000D8
-:102E600000000001000012710008000000000001D5
-:102E700000008D000010000400000004000013207A
-:102E80000030001800000010000013280030001867
-:102E900000000002800000000000000000000000B0
-:102EA000800000000000000000000000000011E8A9
-:102EB0000000000000000001800000000000000091
-:102EC0000000000080000000000000000000000082
-:102ED00080000000000000000000000080000000F2
-:102EE0000000000000000000800000000000000062
-:102EF0000000000080000000000000000000000052
-:102F000000000000000000000000000000000000C1
-:102F100000000000000000000000000000000000B1
-:102F200000000000000000000000000000000000A1
-:102F30008000000000000000000000008000000091
-:102F40000000000000000000000000000000000081
-:102F500000000000000083080080000000000080E6
-:102F60000000000100000000000000000000200838
-:102F70000010000000000010000020000000000011
-:102F80000000000800008D1000080000000000088C
-:102F900000008D7000080000000000080000845050
-:102FA000046000280000046000008EA000080000FB
-:102FB0000000000100008EA10008000000000001D8
-:102FC0000000840800080000000000080000844899
-:102FD000000000000000000100008DF40008000067
-:102FE0000000000200008DF6000800000000000252
-:102FF00000008E04001000000000000480000000AB
-:103000000000000000000000800000000000000040
-:103010000000000080000000000000000000000030
-:1030200000000000000000000000000000000000A0
-:103030000000000000000000000000000000000090
-:103040000000000000000000000000000000000080
-:103050008000000000000000000000008000000070
-:103060000000000000000000000000000000000060
-:1030700000000000800000000000000000000000D0
-:103080008000000000000000000000008000000040
-:1030900000000000000000008000000000000000B0
-:1030A00000000000000030000040000000000008A8
-:1030B00000003008004000000000002800003390AD
-:1030C00001C00010000000080000320000200000D5
-:1030D0000000002000003720000000000000000871
-:1030E0000000102006200038000000080000A000AA
-:1030F000000000000000200000003EA900000000C9
-:103100000000000100003EC80000000000000002B6
-:1031100000001C4000E000080000000880000000E3
-:103120000000000000000000000040000008000057
-:103130000000000100004001000800000000000144
-:103140000000404000080004000000020000406051
-:103150000008000400000004000040000008000017
-:10316000000000040000400400080000000000040B
-:10317000000040400000000000000008000040483F
-:1031800000000000000000080000800000000000B7
-:103190000000001000005040000100040000000189
-:1031A0000000500000000000000000200000500857
-:1031B00000100000000000040000500C001000008F
-:1031C00000000001000052C70000000000000001E4
-:1031D000000052C6000000000000000100003000A6
-:1031E0000030001800000004000030040030001817
-:1031F0000000000400003008003000180000000249
-:103200000000300A00300018000000020000300CFE
-:1032100000300018000000010000300D00300018E0
-:10322000000000010000300E003000180000000116
-:1032300000003010003000180000000400003014BE
-:103240000030001800000004000050000100008061
-:103250000008000400005004010000800008000481
-:103260000000000A0000000000000000000050689C
-:103270000100008000000001000050690100008092
-:10328000000000010000506C0100008000000002FE
-:103290000000506E0100008000000002000050702D
-:1032A0000100008000000004000050740100008054
-:1032B00000000004000050660100008000000002D1
-:1032C0000000506401000080000000010000506018
-:1032D0000100008000000002000050620100008038
-:1032E00000000002000050500100008000000004B7
-:1032F00000005054010000800000000400005058FD
-:1033000001000080000000040000505C010000800B
-:10331000000000040000507C01000080000000015B
-:103320000000507D010000800000000100004018F6
-:103330000010000000000004000040900010000099
-:10334000000000040000409800100000000000048D
-:1033500000004110000000000000000200004112C7
-:103360000000000000000002000041140000000006
-:1033700000000002000041160000000000000002F2
-:1033800000006040000800000000000200006042F1
-:103390000008000000000002000060440008000077
-:1033A0000000000400006080000800000000000829
-:1033B000000060C00040000800000008000060003D
-:1033C0000008000000000002000060020008000089
-:1033D000000000010000600400080000000000027E
-:1033E0000000634000080000000000080000638047
-:1033F00000080000000000040000638400080000D2
-:1034000000000001000063C000080000000000028E
-:10341000000063C400080000000000020000640017
-:103420000008000000000004000070000010000010
-:103430000000000400007004001000000000000400
-:103440000000700800100000000000040000700080
-:1034500000080000000000020000700200080000E8
-:1034600000000001000070040008000000000002DD
-:1034700000007040000800000000000200007044DE
-:103480000008000000000002000070460008000074
-:10349000000000020000764800080000000000085C
-:1034A000000070800008000000000002000070842E
-:1034B00000080000000000020000768800080000FC
-:1034C000000000080000804000080000000000012B
-:1034D0000000804100080000000000010000804260
-:1034E0000008000000000001000080430008000008
-:1034F0000000000100008000000800000000000241
-:1035000000008002000800000000000100008004AC
-:103510000008000000000002000080C00008000059
-:1035200000000002000080C200080000000000024D
-:10353000000080C40008000000000002000080803D
-:103540000008000000000001000080810008000069
-:10355000000000010000808200080000000000015F
-:10356000000080830008000000000001000080844B
-:103570000008000000000001000080850008000035
-:10358000000000010000808600080000000000012B
-:10359000000060000008000000000002000060025F
-:1035A00000080000000000010000600400080000A6
-:1035B000000000020000604200C00018000000028D
-:1035C0000000604000C00018000000020000604CD5
-:1035D00000C00018000000080000604400C000188F
-:1035E000000000080000605700C000180000000143
-:1035F0000000605400C00018000000020000605687
-:1036000000C0001800000001000066400008000033
-:1036100000000008000066800008000000000008AC
-:10362000000066C000080000000000080000D94249
-:1036300000180000000000020000DE400000000052
-:10364000000000000000E000000000000000000496
-:103650000000DD4000000000000000040000DD4428
-:1036600000000000000000040000DD480000000031
-:10367000000000040000DD4C000000000000000419
-:103680000000DD5000000000000000040000DD54D8
-:1036900000000000000000040000DD5800000000F1
-:1036A000000000040000DD400000000000000020D9
-:1036B0000000DA0000000000000000040000DA0052
-:1036C00000000000000000680000BB600000000077
-:1036D000000000000000D000000000000000000416
-:1036E0000000B0C000000000000000040000B0C4F2
-:1036F00000000000000000040000B0C8000000004E
-:10370000000000040000B0C0000000000000001035
-:103710000000D6B000000000000000040000D6B495
-:1037200000000000000000040000D6B80000000007
-:10373000000000040000D6BC0000000000000004EF
-:103740000000D6B000000000000000100000D348C8
-:1037500000000000000000080000D3580000000036
-:1037600000000080000000100000000000000000C9
-:103770000000D35800000000000000080000000016
-:08378000060205000000000034
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw.ihex b/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw.ihex
new file mode 100644
index 00000000000..ba1ce53df1d
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e1h-6.2.9.0.fw.ihex
@@ -0,0 +1,13192 @@
+:1000000000004F48000000680000070C00004FB8D7
+:1000100000001ED4000056C800000094000075A027
+:1000200000009F4C00007638000000CC00011588CD
+:100030000000DC5800011658000000940001F2B8DE
+:100040000000400C0001F350000000A400023360E7
+:100050000000F4240002340800000FFC00032830E4
+:100060000000000400033830020400480000000FC4
+:1000700002040054000000450204005C0000000679
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040004000000FF02040008000000FF79
+:100170000204000C000000FF02040010000000FF59
+:10018000020400140000007F02040018000000FFB9
+:100190000204001C000000FF02040020000000FF19
+:1001A000020400240000003E0204002800000000B9
+:1001B0000204002C0000003F020400300000003F59
+:1001C000020400340000003F020400380000003F39
+:1001D0000204003C0000003F020400400000003F19
+:1001E000020400440000003F020404CC00000001AF
+:1001F00002042008000002110204200C000002008A
+:10020000020420100000020402042014000002195D
+:100210000204201C0000FFFF020420200000FFFF5A
+:10022000020420240000FFFF020420280000FFFF3A
+:1002300002042038000000200604203C0000001FBB
+:10024000020420B800000001060420BC0000005F8A
+:100250000204223807FFFFFF0204223C0000003F97
+:100260000204224007FFFFFF020422440000000FA7
+:1002700001042248000000000104224C000000009C
+:10028000010422500000000001042254000000007C
+:1002900001042258000000000104225C000000005C
+:1002A000010422600000000001042264000000003C
+:1002B00001042268000000000104226C000000001C
+:1002C00001042270000000000104227400000000FC
+:1002D00001042278000000000104227C00000000DC
+:1002E0000C042000000003E80A04200000000001C4
+:1002F0000B0420000000000A0605400000000D006D
+:100300000205004400000020020500480000003201
+:10031000020500900215002002050094021500203D
+:1003200002050098000000300205009C0810000043
+:10033000020500A000000033020500A40000003008
+:10034000020500A800000031020500AC0000000218
+:10035000020500B000000005020500B40000000620
+:10036000020500B800000002020500BC0000000207
+:10037000020500C000000000020500C400000005E6
+:10038000020500C800000002020500CC00000002C7
+:10039000020500D000000002020500D400000001A8
+:1003A00002050114000000010205011C000000010B
+:1003B0000205012000000002020502040000000105
+:1003C0000205020C0000004002050210000000407F
+:1003D0000205021C0000002002050220000000139C
+:1003E0000205022400000020060502400000000A69
+:1003F00004050280002000000205005000000007F4
+:10040000020500540000000702050058000000002B
+:100410000205005C00000008020500600000000109
+:100420000605006400000003020500D80000000675
+:1004300002050004000000010205000800000001A0
+:100440000205000C00000001020500100000000180
+:100450000205001400000001020500180000000160
+:100460000205001C00000001020500200000000140
+:100470000205002400000001020500280000000120
+:100480000205002C00000001020500300000000100
+:1004900002050034000000010205003800000001E0
+:1004A0000205003C000000010205004000000001C0
+:1004B000020500E00000000D020500E80000000059
+:1004C000020500F000000000020500F80000000036
+:1004D000020500E40000002D020500EC00000020F1
+:1004E000020500F400000020020500FC00000020CE
+:1004F000020500E00000001D020500E800000010F9
+:10050000020500F000000010020500F800000010D5
+:10051000020500E40000003D020500EC0000003090
+:10052000020500F400000030020500FC000000306D
+:10053000020500E00000004D020500E80000004058
+:10054000020500F000000040020500F80000004035
+:10055000020500E40000006D020500EC00000060F0
+:10056000020500F400000060020500FC00000060CD
+:10057000020500E00000005D020500E800000050F8
+:10058000020500F000000050020500F800000050D5
+:10059000020500E40000007D020500EC0000007090
+:1005A000020500F400000070020500FC000000706D
+:1005B0000406100002000020020600DC000000011A
+:1005C000010600D80000000004060200000302201B
+:1005D000020600DC00000000010600B80000000078
+:1005E000010600C8000000000206016C00000000C7
+:1005F000010600BC00000000010600CC0000000065
+:1006000002060170000000000718040000910000BD
+:10061000081807D800050223071C00002BF700006C
+:10062000071C80002DD10AFE071D00002F461673FF
+:10063000071D800016342245081DB13049DA022515
+:100640000118000000000000011800040000000074
+:1006500001180008000000000118000C0000000054
+:100660000118001000000000011800140000000034
+:1006700002180020000000010218002400000002FF
+:1006800002180028000000030218002C00000000DF
+:1006900002180030000000040218003400000001BD
+:1006A00002180038000000000218003C00000001A1
+:1006B000021800400000000402180044000000007E
+:1006C00002180048000000010218004C000000035E
+:1006D0000218005000000000021800540000000141
+:1006E00002180058000000040218005C000000001E
+:1006F00002180060000000010218006400000003FE
+:1007000002180068000000000218006C00000001E0
+:1007100002180070000000040218007400000000BD
+:1007200002180078000000040218007C000000039A
+:100730000618008000000002021800A400003FFF1D
+:10074000021800A8000003FF0218022400000000A5
+:1007500002180234000000000218024C00000000E1
+:10076000021802E4000000FF061810000000040058
+:10077000021B8BC000000001021B8000000000343F
+:10078000021B804000000018021B80800000000C4B
+:10079000021B80C0000000200C1B83000007A1206A
+:1007A0000A1B8300000001380B1B83000000138824
+:1007B0000A1B8340000000000C1B8340000001F472
+:1007C0000B1B834000000005021B83800007A12053
+:1007D000021B83C0000001F4021B14800000000112
+:1007E0000A1B148000000000061A1000000003B36A
+:1007F000041A1ECC00010227061A1ED000000008B1
+:10080000061A2008000000C8061A20000000000296
+:10081000041AAF4000100228061A3718000000041E
+:10082000061A371000000002061A500000000002ED
+:10083000061A500800000004061A501800000004B0
+:10084000061A502800000004061A50380000000460
+:10085000061A504800000004061A50580000000410
+:10086000061A506800000004061A507800000002C2
+:10087000041A52C000020238061A40500000000656
+:10088000041A40680002023A041A40400004023C84
+:10089000041A800000010240061A800400000003D0
+:1008A000041A801000010241061A8014000000039F
+:1008B000041A802000010242061A8024000000036E
+:1008C000041A803000010243061A8034000000033D
+:1008D000041A804000010244061A8044000000030C
+:1008E000041A805000010245061A805400000003DB
+:1008F000041A806000010246061A806400000003AA
+:10090000041A807000010247061A80740000000378
+:10091000041A808000010248061A80840000000347
+:10092000041A809000010249061A80940000000316
+:10093000041A80A00001024A061A80A400000003E5
+:10094000041A80B00001024B061A80B400000003B4
+:10095000041A80C00001024C061A80C40000000383
+:10096000041A80D00001024D061A80D40000000352
+:10097000041A80E00001024E061A80E40000000321
+:10098000041A80F00001024F061A80F400000003F0
+:10099000041A810000010250061A810400000003BD
+:1009A000041A811000010251061A8114000000038C
+:1009B000041A812000010252061A8124000000035B
+:1009C000041A813000010253061A8134000000032A
+:1009D000041A814000010254061A814400000003F9
+:1009E000041A815000010255061A815400000003C8
+:1009F000041A816000010256061A81640000000397
+:100A0000041A817000010257061A81740000000365
+:100A1000041A818000010258061A81840000000334
+:100A2000041A819000010259061A81940000000303
+:100A3000041A81A00001025A061A81A400000003D2
+:100A4000041A81B00001025B061A81B400000003A1
+:100A5000041A81C00001025C061A81C40000000370
+:100A6000041A81D00001025D061A81D4000000033F
+:100A7000041A81E00001025E061A81E4000000030E
+:100A8000041A81F00001025F061A81F400000003DD
+:100A9000041A820000010260061A820400000003AA
+:100AA000041A821000010261061A82140000000379
+:100AB000041A822000010262061A82240000000348
+:100AC000041A823000010263061A82340000000317
+:100AD000041A824000010264061A824400000003E6
+:100AE000041A825000010265061A825400000003B5
+:100AF000041A826000010266061A82640000000384
+:100B0000041A827000010267061A82740000000352
+:100B1000041A828000010268061A82840000000321
+:100B2000041A829000010269061A829400000003F0
+:100B3000041A82A00001026A061A82A400000003BF
+:100B4000041A82B00001026B061A82B4000000038E
+:100B5000041A82C00001026C061A82C4000000035D
+:100B6000041A82D00001026D061A82D4000000032C
+:100B7000041A82E00001026E061A82E400000003FB
+:100B8000041A82F00001026F061A82F400000003CA
+:100B9000041A830000010270061A83040000000397
+:100BA000041A831000010271061A83140000000366
+:100BB000041A832000010272061A83240000000335
+:100BC000041A833000010273061A83340000000304
+:100BD000041A834000010274061A834400000003D3
+:100BE000041A835000010275061A835400000003A2
+:100BF000041A836000010276061A83640000000371
+:100C0000041A837000010277061A8374000000033F
+:100C1000041A838000010278061A8384000000030E
+:100C2000041A839000010279061A839400000003DD
+:100C3000041A83A00001027A061A83A400000003AC
+:100C4000041A83B00001027B061A83B4000000037B
+:100C5000041A83C00001027C061A83C4000000034A
+:100C6000041A83D00001027D061A83D40000000319
+:100C7000041A83E00001027E061A83E400000003E8
+:100C8000041A83F00001027F061A83F400000003B7
+:100C9000041A840000010280061A84040000000384
+:100CA000041A841000010281061A84140000000353
+:100CB000041A842000010282061A84240000000322
+:100CC000041A843000010283061A843400000003F1
+:100CD000041A844000010284061A844400000003C0
+:100CE000041A845000010285061A8454000000038F
+:100CF000041A846000010286061A8464000000035E
+:100D0000041A847000010287061A8474000000032C
+:100D1000041A848000010288061A848400000003FB
+:100D2000041A849000010289061A849400000003CA
+:100D3000041A84A00001028A061A84A40000000399
+:100D4000041A84B00001028B061A84B40000000368
+:100D5000041A84C00001028C061A84C40000000337
+:100D6000041A84D00001028D061A84D40000000306
+:100D7000041A84E00001028E061A84E400000003D5
+:100D8000041A84F00001028F061A84F400000003A4
+:100D9000041A850000010290061A85040000000371
+:100DA000041A851000010291061A85140000000340
+:100DB000041A852000010292061A8524000000030F
+:100DC000041A853000010293061A853400000003DE
+:100DD000041A854000010294061A854400000003AD
+:100DE000041A855000010295061A8554000000037C
+:100DF000041A856000010296061A8564000000034B
+:100E0000041A857000010297061A85740000000319
+:100E1000041A858000010298061A858400000003E8
+:100E2000041A859000010299061A859400000003B7
+:100E3000041A85A00001029A061A85A40000000386
+:100E4000041A85B00001029B061A85B40000000355
+:100E5000041A85C00001029C061A85C40000000324
+:100E6000041A85D00001029D061A85D400000003F3
+:100E7000041A85E00001029E061A85E400000003C2
+:100E8000041A85F00001029F061A85F40000000391
+:100E9000041A8600000102A0061A8604000000035E
+:100EA000041A8610000102A1061A8614000000032D
+:100EB000041A8620000102A2061A862400000003FC
+:100EC000041A8630000102A3061A863400000003CB
+:100ED000041A8640000102A4061A8644000000039A
+:100EE000041A8650000102A5061A86540000000369
+:100EF000041A8660000102A6061A86640000000338
+:100F0000041A8670000102A7061A86740000000306
+:100F1000041A8680000102A8061A868400000003D5
+:100F2000041A8690000102A9061A869400000003A4
+:100F3000041A86A0000102AA061A86A40000000373
+:100F4000041A86B0000102AB061A86B40000000342
+:100F5000041A86C0000102AC061A86C40000000311
+:100F6000041A86D0000102AD061A86D400000003E0
+:100F7000041A86E0000102AE061A86E400000003AF
+:100F8000041A86F0000102AF061A86F4000000037E
+:100F9000041A8700000102B0061A8704000000034B
+:100FA000041A8710000102B1061A8714000000031A
+:100FB000041A8720000102B2061A872400000003E9
+:100FC000041A8730000102B3061A873400000003B8
+:100FD000041A8740000102B4061A87440000000387
+:100FE000041A8750000102B5061A87540000000356
+:100FF000041A8760000102B6061A87640000000325
+:10100000041A8770000102B7061A877400000003F3
+:10101000041A8780000102B8061A878400000003C2
+:10102000041A8790000102B9061A87940000000391
+:10103000041A87A0000102BA061A87A40000000360
+:10104000041A87B0000102BB061A87B4000000032F
+:10105000041A87C0000102BC061A87C400000003FE
+:10106000041A87D0000102BD061A87D400000003CD
+:10107000041A87E0000102BE061A87E4000000039C
+:10108000041A87F0000102BF061A87F4000000036B
+:10109000041A8800000102C0061A88040000000338
+:1010A000041A8810000102C1061A88140000000307
+:1010B000041A8820000102C2061A882400000003D6
+:1010C000041A8830000102C3061A883400000003A5
+:1010D000041A8840000102C4061A88440000000374
+:1010E000041A8850000102C5061A88540000000343
+:1010F000041A8860000102C6061A88640000000312
+:10110000041A8870000102C7061A887400000003E0
+:10111000041A8880000102C8061A888400000003AF
+:10112000041A8890000102C9061A8894000000037E
+:10113000041A88A0000102CA061A88A4000000034D
+:10114000041A88B0000102CB061A88B4000000031C
+:10115000041A88C0000102CC061A88C400000003EB
+:10116000041A88D0000102CD061A88D400000003BA
+:10117000041A88E0000102CE061A88E40000000389
+:10118000041A88F0000102CF061A88F40000000358
+:10119000041A8900000102D0061A89040000000325
+:1011A000041A8910000102D1061A891400000003F4
+:1011B000041A8920000102D2061A892400000003C3
+:1011C000041A8930000102D3061A89340000000392
+:1011D000041A8940000102D4061A89440000000361
+:1011E000041A8950000102D5061A89540000000330
+:1011F000041A8960000102D6061A896400000003FF
+:10120000041A8970000102D7061A897400000003CD
+:10121000041A8980000102D8061A8984000000039C
+:10122000041A8990000102D9061A8994000000036B
+:10123000041A89A0000102DA061A89A4000000033A
+:10124000041A89B0000102DB061A89B40000000309
+:10125000041A89C0000102DC061A89C400000003D8
+:10126000041A89D0000102DD061A89D400000003A7
+:10127000041A89E0000102DE061A89E40000000376
+:10128000041A89F0000102DF061A89F40000000345
+:10129000041A8A00000102E0061A8A040000000312
+:1012A000041A8A10000102E1061A8A1400000003E1
+:1012B000041A8A20000102E2061A8A2400000003B0
+:1012C000041A8A30000102E3061A8A34000000037F
+:1012D000041A8A40000102E4061A8A44000000034E
+:1012E000041A8A50000102E5061A8A54000000031D
+:1012F000041A8A60000102E6061A8A6400000003EC
+:10130000041A8A70000102E7061A8A7400000003BA
+:10131000041A8A80000102E8061A8A840000000389
+:10132000041A8A90000102E9061A8A940000000358
+:10133000041A8AA0000102EA061A8AA40000000327
+:10134000041A8AB0000102EB061A8AB400000003F6
+:10135000041A8AC0000102EC061A8AC400000003C5
+:10136000041A8AD0000102ED061A8AD40000000394
+:10137000041A8AE0000102EE061A8AE40000000363
+:10138000041A8AF0000102EF061A8AF40000000332
+:10139000041A8B00000102F0061A8B0400000003FF
+:1013A000041A8B10000102F1061A8B1400000003CE
+:1013B000041A8B20000102F2061A8B24000000039D
+:1013C000041A8B30000102F3061A8B34000000036C
+:1013D000041A8B40000102F4061A8B44000000033B
+:1013E000041A8B50000102F5061A8B54000000030A
+:1013F000041A8B60000102F6061A8B6400000003D9
+:10140000041A8B70000102F7061A8B7400000003A7
+:10141000041A8B80000102F8061A8B840000000376
+:10142000041A8B90000102F9061A8B940000000345
+:10143000041A8BA0000102FA061A8BA40000000314
+:10144000041A8BB0000102FB061A8BB400000003E3
+:10145000041A8BC0000102FC061A8BC400000003B2
+:10146000041A8BD0000102FD061A8BD40000000381
+:10147000041A8BE0000102FE061A8BE40000000350
+:10148000041A8BF0000102FF061A8BF4000000031F
+:10149000041A8C0000010300061A8C0400000003EB
+:1014A000041A8C1000010301061A8C1400000003BA
+:1014B000041A8C2000010302061A8C240000000389
+:1014C000041A8C3000010303061A8C340000000358
+:1014D000041A8C4000010304061A8C440000000327
+:1014E000041A8C5000010305061A8C5400000003F6
+:1014F000041A8C6000010306061A8C6400000003C5
+:10150000041A8C7000010307061A8C740000000393
+:10151000041A8C8000010308061A8C840000000362
+:10152000041A8C9000010309061A8C940000000331
+:10153000041A8CA00001030A061A8CA40000000300
+:10154000041A8CB00001030B061A8CB400000003CF
+:10155000041A8CC00001030C061A8CC4000000039E
+:10156000041A8CD00001030D061A8CD4000000036D
+:10157000041A8CE00001030E061A8CE4000000033C
+:10158000041A8CF00001030F061A8CF4000000030B
+:10159000041A8D0000010310061A8D0400000003D8
+:1015A000041A8D1000010311061A8D1400000003A7
+:1015B000041A8D2000010312061A8D240000000376
+:1015C000041A8D3000010313061A8D340000000345
+:1015D000041A8D4000010314061A8D440000000314
+:1015E000041A8D5000010315061A8D5400000003E3
+:1015F000041A8D6000010316061A8D6400000003B2
+:10160000041A8D7000010317061A8D740000000380
+:10161000041A8D8000010318061A8D84000000034F
+:10162000041A8D9000010319061A8D94000000031E
+:10163000041A8DA00001031A061A8DA400000003ED
+:10164000041A8DB00001031B061A8DB400000003BC
+:10165000041A8DC00001031C061A8DC4000000038B
+:10166000041A8DD00001031D061A8DD4000000035A
+:10167000041A8DE00001031E061A8DE40000000329
+:10168000041A8DF00001031F061A8DF400000003F8
+:10169000041A8E0000010320061A8E0400000003C5
+:1016A000041A8E1000010321061A8E140000000394
+:1016B000041A8E2000010322061A8E240000000363
+:1016C000041A8E3000010323061A8E340000000332
+:1016D000041A8E4000010324061A8E440000000301
+:1016E000041A8E5000010325061A8E5400000003D0
+:1016F000041A8E6000010326061A8E64000000039F
+:10170000041A8E7000010327061A8E74000000036D
+:10171000041A8E8000010328061A8E84000000033C
+:10172000041A8E9000010329061A8E94000000030B
+:10173000041A8EA00001032A061A8EA400000003DA
+:10174000041A8EB00001032B061A8EB400000003A9
+:10175000041A8EC00001032C061A8EC40000000378
+:10176000041A8ED00001032D061A8ED40000000347
+:10177000041A8EE00001032E061A8EE40000000316
+:10178000041A8EF00001032F061A8EF400000003E5
+:10179000041A8F0000010330061A8F0400000003B2
+:1017A000041A8F1000010331061A8F140000000381
+:1017B000041A8F2000010332061A8F240000000350
+:1017C000041A8F3000010333061A8F34000000031F
+:1017D000041A8F4000010334061A8F4400000003EE
+:1017E000041A8F5000010335061A8F5400000003BD
+:1017F000041A8F6000010336061A8F64000000038C
+:10180000041A8F7000010337061A8F74000000035A
+:10181000041A8F8000010338061A8F840000000329
+:10182000041A8F9000010339061A8F9400000003F8
+:10183000041A8FA00001033A061A8FA400000003C7
+:10184000041A8FB00001033B061A8FB40000000396
+:10185000041A8FC00001033C061A8FC40000000365
+:10186000041A8FD00001033D061A8FD40000000334
+:10187000041A8FE00001033E061A8FE400000007FF
+:10188000041A62C00020033F061AD0000000007254
+:10189000061AD24800000010061AD6B00000002038
+:1018A000061AD47000000090061AD46800000002E6
+:1018B000061AA000000001C4061A30000000001043
+:1018C000061A308000000010061A310000000010D7
+:1018D000061A318000000010061A330000000012C2
+:1018E000061A339000000070061AD4580000000257
+:1018F000061AD34800000002061AD3580000002040
+:10190000061AA710000001C4061A3040000000109B
+:10191000061A30C000000010061A31400000001006
+:10192000061A31C000000010061A334800000012E9
+:10193000061A355000000070061AD460000000023C
+:10194000061AD35000000002061AD3D80000002067
+:10195000021AAE2000000000061A5000000000022B
+:10196000061A508000000012041A40000002035FB3
+:10197000041A63C000020361061A7000000000042C
+:10198000061A320000000008021AAE24000000000F
+:10199000061A501000000002061A50C8000000127B
+:1019A000041A400800020363041A63C800020365B6
+:1019B000061A701000000004061A32200000000809
+:1019C000021AAE2800000000061A50200000000293
+:1019D000061A511000000012041A4010000203679A
+:1019E000041A63D000020369061A70200000000484
+:1019F000061A324000000008021AAE2C0000000057
+:101A0000061A503000000002061A51580000001259
+:101A1000041A40180002036B041A63D80002036D15
+:101A2000061A703000000004061A32600000000838
+:101A3000021AAE3000000000061A504000000002FA
+:101A4000061A51A000000012041A40200002036F81
+:101A5000041A63E000020371061A704000000004DB
+:101A6000061A328000000008021AAE34000000009E
+:101A7000061A505000000002061A51E80000001239
+:101A8000041A402800020373041A63E80002037575
+:101A9000061A705000000004061A32A00000000868
+:101AA000021AAE3800000000061A50600000000262
+:101AB000061A523000000012041A40300002037768
+:101AC000041A63F000020379061A70600000000433
+:101AD000061A32C000000008021AAE3C00000000E6
+:101AE000061A507000000002061A52780000001218
+:101AF000041A40380002037B041A63F80002037DD5
+:101B0000061A707000000004061A32E00000000897
+:101B10000200A468000B01C80200A294071D29114D
+:101B20000200A298000000000200A29C009C042475
+:101B30000200A2A0000000000200A2A4000002090E
+:101B40000200A270000000000200A2740000000069
+:101B50000200A270000000000200A2740000000059
+:101B60000200A270000000000200A2740000000049
+:101B70000200A270000000000200A2740000000039
+:101B8000020160A000000001020160A400000262E6
+:101B9000020160A800000002020160AC0000001811
+:101BA0000201620400000001020100B40000000113
+:101BB000020100B800000001020100DC0000000189
+:101BC0000201010000000001020101040000000107
+:101BD0000201007C003000000201008400000028A7
+:101BE0000201008C0000000002010130000000042E
+:101BF0000201025C00000001020103280000000055
+:101C0000020160580000FFFF020160700000000741
+:101C10000201608000000001020105540000003054
+:101C2000020100C400000001020100CC000000011C
+:101C3000020100F800000001020100F000000001B4
+:101C4000020100800030000002010088000000282E
+:101C500002010090000000000201013400000004B5
+:101C6000020102DC000000010201032C0000000060
+:101C70000201605C0000FFFF0201607400000007C9
+:101C800002016084000000010201056400000030D0
+:101C9000020100C800000001020100D000000001A4
+:101CA000020100FC00000001020100F4000000013C
+:101CB000020C100000000028020C20080000021195
+:101CC000020C200C00000200020C20100000020494
+:101CD000020C201C0000FFFF020C20200000FFFF70
+:101CE000020C20240000FFFF020C20280000FFFF50
+:101CF000020C203800000020020C203C00000021D3
+:101D0000020C204000000022020C204400000023AE
+:101D1000020C204800000024020C204C000000258A
+:101D2000020C205000000026020C20540000002766
+:101D3000020C205800000028020C205C0000002942
+:101D4000020C20600000002A020C20640000002B1E
+:101D5000020C20680000002C020C206C0000002DFA
+:101D6000020C20700000002E020C20740000002FD6
+:101D7000020C207800000010060C207C00000007F8
+:101D8000020C209800000011020C209C00000012A0
+:101D9000020C20A000000013060C20A40000001D6F
+:101DA000020C211800000001020C211C000000019F
+:101DB000020C212000000001060C21240000001D5F
+:101DC000020C219800000001060C219C0000000775
+:101DD000020C21B800000001020C21BC000000012F
+:101DE000020C21C000000001020C21C4000000010F
+:101DF000020C21C800000001020C21CC00000001EF
+:101E0000020C21D000000001020C21D400000001CE
+:101E1000020C21D800000001020C21DC00000001AE
+:101E2000020C21E000000001020C21E4000000018E
+:101E3000020C21E800000001020C21EC000000016E
+:101E4000020C21F000000001020C21F4000000014E
+:101E5000020C21F800000001060C21FC0000000724
+:101E6000020C221800000001060C221C00000007D2
+:101E7000020C223807FFFFFF020C223C0000003F4B
+:101E8000020C224007FFFFFF020C22440000000F5B
+:101E9000010C224800000000010C224C0000000050
+:101EA000010C225000000000010C22540000000030
+:101EB000010C225800000000010C225C0000000010
+:101EC000010C226000000000010C226400000000F0
+:101ED000010C226800000000010C226C00000000D0
+:101EE000010C227000000000010C227400000000B0
+:101EF000010C227800000000010C227C0000000090
+:101F00000C0C2000000003E80A0C20000000000177
+:101F10000B0C20000000000A020C40080000101109
+:101F2000020C400C00001000020C401000001004D5
+:101F3000020C401400001021020C401C0000FFFFA6
+:101F4000020C40200000FFFF020C40240000FFFFB5
+:101F5000020C40280000FFFF020C40380000004641
+:101F6000020C403C00000010060C40400000000243
+:101F7000020C404800000018020C404C000000F029
+:101F8000060C40500000001F020C40CC0000000175
+:101F9000060C40D00000003A020C41B800000001DD
+:101FA000060C41BC00000003020C41C80000000107
+:101FB000020C41CC00000001060C41D00000001AC8
+:101FC000020C423807FFFFFF020C423C0000003FBA
+:101FD000020C424007FFFFFF020C42440000000FCA
+:101FE000010C424800000000010C424C00000000BF
+:101FF000010C425000000000010C4254000000009F
+:10200000010C425800000000010C425C000000007E
+:10201000010C426000000000010C4264000000005E
+:10202000010C426800000000010C426C000000003E
+:10203000010C427000000000010C4274000000001E
+:10204000010C427800000000010C427C00000000FE
+:10205000010C4280000000000C0C4000000003E86E
+:102060000A0C4000000000010B0C40000000000AB8
+:10207000060D400000000A00020D0044000000327E
+:10208000020D008C02150020020D009002150020A8
+:10209000020D009408100000020D009800000033AB
+:1020A000020D009C00000002020D00A000000000D4
+:1020B000020D00A400000005020D00A800000005AC
+:1020C000060D00AC00000002020D00B4000000028A
+:1020D000020D00B800000003020D00BC0000000269
+:1020E000020D00C000000001020D00C80000000247
+:1020F000020D00CC00000002020D015C0000000196
+:10210000020D016400000001020D016800000002E0
+:10211000020D020400000001020D020C000000206C
+:10212000020D021000000040020D021400000040E9
+:10213000020D022000000003020D0224000000181E
+:10214000060D028000000012040D03000018037F3A
+:10215000060D03600000000C020D004C00000001A1
+:10216000020D005000000002020D005400000000AB
+:10217000020D005800000008060D005C000000047D
+:10218000020D00C400000004020D00040000000164
+:10219000020D000800000001020D000C000000010B
+:1021A000020D001000000001020D001400000001EB
+:1021B000020D001800000001020D001C00000001CB
+:1021C000020D002000000001020D002400000001AB
+:1021D000020D002800000001020D002C000000018B
+:1021E000020D003000000001020D0034000000016B
+:1021F000020D003800000001020D003C000000014B
+:10220000020D011400000009020D011C0000000A6B
+:10221000020D012400000000020D012C000000004E
+:10222000020D013400000000020D013C0000000B13
+:10223000020D014400000000020D011800000029F9
+:10224000020D01200000002A020D012800000020DC
+:10225000020D013000000020020D013800000020B6
+:10226000020D01400000002B020D0148000000207B
+:10227000020D011400000019020D011C0000001ADB
+:10228000020D012400000010020D012C00000010BE
+:10229000020D013400000010020D013C0000001B83
+:1022A000020D014400000010020D01180000003969
+:1022B000020D01200000003A020D0128000000304C
+:1022C000020D013000000030020D01380000003026
+:1022D000020D01400000003B020D014800000030EB
+:1022E000020D011400000049020D011C0000004A0B
+:1022F000020D012400000040020D012C00000040EE
+:10230000020D013400000040020D013C0000004BB2
+:10231000020D014400000040020D01180000006998
+:10232000020D01200000006A020D0128000000607B
+:10233000020D013000000060020D01380000006055
+:10234000020D01400000006B020D0148000000601A
+:10235000020D011400000059020D011C0000005A7A
+:10236000020D012400000050020D012C000000505D
+:10237000020D013400000050020D013C0000005B22
+:10238000020D014400000050020D01180000007908
+:10239000020D01200000007A020D012800000070EB
+:1023A000020D013000000070020D013800000070C5
+:1023B000020D01400000007B020D0148000000708A
+:1023C000060E200000000800020E004C0000003243
+:1023D000020E009402150020020E00980215002043
+:1023E000020E009C00000030020E00A00810000049
+:1023F000020E00A400000033020E00A8000000300E
+:10240000020E00AC00000031020E00B0000000021D
+:10241000020E00B400000004020E00B8000000002C
+:10242000020E00BC00000002020E00C0000000020C
+:10243000020E00C400000000020E00C800000002EE
+:10244000020E00CC00000007020E00D000000002C7
+:10245000020E00D400000002020E00D800000001AD
+:10246000020E014400000001020E014C00000001B8
+:10247000020E015000000002020E020400000001E2
+:10248000020E020C00000040020E0210000000408C
+:10249000020E021C00000004020E022000000020B8
+:1024A000020E02240000000E020E02280000001B93
+:1024B000060E030000000012040E0280001B0397AA
+:1024C000060E02EC00000005020E00540000000C95
+:1024D000020E00580000000C020E005C000000001C
+:1024E000020E006000000010020E006400000010E8
+:1024F000060E006800000003020E00DC000000036E
+:10250000020E000400000001020E0008000000019D
+:10251000020E000C00000001020E0010000000017D
+:10252000020E001400000001020E0018000000015D
+:10253000020E001C00000001020E0020000000013D
+:10254000020E002400000001020E0028000000011D
+:10255000020E002C00000001020E003000000001FD
+:10256000020E003400000001020E003800000001DD
+:10257000020E003C00000001020E004000000001BD
+:10258000020E004400000001020E01100000000FC6
+:10259000020E011800000000020E012000000000E1
+:1025A000020E012800000000020E01140000002F9E
+:1025B000020E011C00000020020E01240000000099
+:1025C000020E012C00000000020E01100000001F8E
+:1025D000020E011800000010020E01200000000091
+:1025E000020E012800000000020E01140000003F4E
+:1025F000020E011C00000030020E01240000000049
+:10260000020E012C00000000020E01100000004F1D
+:10261000020E011800000040020E01200000000020
+:10262000020E012800000000020E01140000006FDD
+:10263000020E011C00000060020E012400000000D8
+:10264000020E012C00000000020E01100000005FCD
+:10265000020E011800000050020E012000000000D0
+:10266000020E012800000000020E01140000007F8D
+:10267000020E011C00000070020E01240000000088
+:10268000020E012C000000000730040000C9000009
+:10269000083007D8000503B207340000332B0000D0
+:1026A0000734800030A40CCB07350000351A18F52C
+:1026B000073580002A8A263C0736000018D830DF0C
+:1026C00008364630373A03B40130000000000000FD
+:1026D000013000040000000001300008000000008C
+:1026E0000130000C0000000001300010000000006C
+:1026F0000130001400000000023000200000000142
+:102700000230002400000002023000280000000314
+:102710000230002C000000000230003000000004F5
+:1027200002300034000000010230003800000000D8
+:102730000230003C000000010230004000000004B4
+:102740000230004400000000023000480000000198
+:102750000230004C00000003023000500000000076
+:102760000230005400000001023000580000000454
+:102770000230005C00000000023000600000000138
+:102780000230006400000003023000680000000016
+:102790000230006C000000010230007000000004F4
+:1027A00002300074000000000230007800000004D5
+:1027B0000230007C000000030630008000000002B0
+:1027C000023000A400003FFF023000A8000003FF19
+:1027D0000230022400000000023002340000000039
+:1027E0000230024C00000000023002E40000FFFF53
+:1027F000063020000000080002338BC000000001FA
+:10280000023380000000001A023380400000004EB6
+:102810000233808000000010023380C000000020DE
+:102820000C3383000007A1200A3383000000013825
+:102830000B338300000013880A338340000000003C
+:102840000C338340000001F40B338340000000058B
+:10285000023383800007A120023383C0000001F40B
+:1028600002331480000000010A33148000000000CD
+:10287000063280000000010206322008000000C875
+:10288000063220000000000204328EA0001003B6C1
+:1028900006323EB00000000606323ED800000002BC
+:1028A00006323E800000000A04323EA8000203C641
+:1028B00006323E00000000200632500000000400F6
+:1028C0000632400000000004043274C0000203C855
+:1028D00006324110000000020632D0000000003035
+:1028E0000632DD40000000440632DA00000000D06D
+:1028F0000632DEA0000000020632E0000000080000
+:1029000006328450000001180632100000000188D1
+:102910000632500000000020063251000000002066
+:102920000632520000000020063253000000002052
+:10293000063254000000002006325500000000203E
+:10294000063256000000002006325700000000202A
+:102950000632580000000020063259000000002016
+:1029600006325A000000002006325B000000002002
+:1029700006325C000000002006325D0000000020EE
+:1029800006325E000000002006325F0000000020DA
+:1029900006328DF00000000204328E00000203CAED
+:1029A00006328E08000000020632DE9000000002AF
+:1029B00006321C4000000038063288B000000118C2
+:1029C00006321620000001880632508000000020E8
+:1029D00006325180000000200632528000000020A4
+:1029E0000632538000000020063254800000002090
+:1029F000063255800000002006325680000000207C
+:102A00000632578000000020063258800000002067
+:102A1000063259800000002006325A800000002053
+:102A200006325B800000002006325C80000000203F
+:102A300006325D800000002006325E80000000202B
+:102A400006325F800000002006328DF80000000290
+:102A500004328E10000203CC06328E1800000002F1
+:102A60000632DE980000000206321D200000003809
+:102A700002328D50000000000632401000000002BB
+:102A800002328D5400000000063240200000000297
+:102A900002328D5800000000063240300000000273
+:102AA00002328D5C0000000006324040000000024F
+:102AB00002328D600000000006324050000000022B
+:102AC00002328D6400000000063240600000000207
+:102AD00002328D68000000000632407000000002E3
+:102AE00002328D6C000000000632408000000002BF
+:102AF000072004000091000008200780001003CE8A
+:102B0000072400002AFF00000724800015090AC0DE
+:102B10000824A9F0692803D001200000000000006B
+:102B20000120000400000000012000080000000057
+:102B30000120000C00000000012000100000000037
+:102B4000012000140000000002200020000000010D
+:102B500002200024000000020220002800000003E0
+:102B60000220002C000000000220003000000004C1
+:102B700002200034000000010220003800000000A4
+:102B80000220003C00000001022000400000000480
+:102B90000220004400000000022000480000000164
+:102BA0000220004C00000003022000500000000042
+:102BB0000220005400000001022000580000000420
+:102BC0000220005C00000000022000600000000104
+:102BD00002200064000000030220006800000000E2
+:102BE0000220006C000000010220007000000004C0
+:102BF00002200074000000000220007800000004A1
+:102C00000220007C0000000306200080000000027B
+:102C1000022000A400003FFF022000A8000003FFE4
+:102C20000220022400000000022002340000000004
+:102C30000220024C00000000022002E40000FFFF1E
+:102C4000062020000000080002238BC000000001C5
+:102C500002238000000000100223804000000012C8
+:102C60000223808000000030022380C00000000E9C
+:102C70000C2383000007A1200A23830000000138F1
+:102C80000B238300000013880A2383400000000008
+:102C90000C238340000001F40B2383400000000557
+:102CA000022383800007A120022383C0000001F4D7
+:102CB00002231480000000010A2314800000000099
+:102CC000062210000000004206222008000000C872
+:102CD00006222000000000020622B000000000C60C
+:102CE0000422B318000503D20622B32C0000000B07
+:102CF0000422B358000503D70622B36C0000000B72
+:102D00000422B398000503DC0622B3AC0000000BDC
+:102D10000422B3D8000503E10622B3EC0000000B47
+:102D20000422B418000503E60622B42C0000000BB0
+:102D30000422B458000503EB0622B46C0000000B1B
+:102D40000422B498000503F00622B4AC0000000B86
+:102D50000422B4D8000503F50622B4EC0000000BF1
+:102D60000422B518000503FA0622B52C0000000B5A
+:102D70000422B558000503FF0622B56C0000000BC5
+:102D80000422B598000504040622B5AC0000000B2F
+:102D90000422B5D8000504090622B5EC0000000B9A
+:102DA0000422B6180005040E0622B62C0000000B03
+:102DB0000422B658000504130622B66C0000000B6E
+:102DC0000422B698000504180622B6AC0000000BD9
+:102DD0000422B6D80005041D0622B6EC0000000B44
+:102DE0000422B718000504220622B72C0000000BAD
+:102DF0000422B758000504270622B76C0000000B18
+:102E00000422B7980005042C0622B7AC0000000B82
+:102E10000422B7D8000504310622B7EC0000000BED
+:102E20000422B818000504360622B82C0000000B56
+:102E30000422B8580005043B0622B86C0000000BC1
+:102E40000422B898000504400622B8AC0000000B2C
+:102E50000422B8D8000504450622B8EC0000000B97
+:102E60000422B9180005044A0622B92C0000000B00
+:102E70000422B9580005044F0622B96C0000000B6B
+:102E80000422B998000504540622B9AC0000000BD6
+:102E90000422B9D8000504590622B9EC0000000B41
+:102EA0000422BA180005045E0622BA2C0000000BAA
+:102EB0000422BA58000504630622BA6C0000000B15
+:102EC0000422BA98000504680622BAAC0000000B80
+:102ED0000422BAD80005046D0622BAEC00000005F1
+:102EE0000622BB00000000530422BC4C0001047207
+:102EF0000622BC50000000030422BC5C00010473E5
+:102F00000622BC60000000030422BC6C00010474B3
+:102F10000622BC70000000030422BC7C0001047582
+:102F20000622BC80000000030422BC8C0001047651
+:102F30000622BC90000000030422BC9C0001047720
+:102F40000622BCA0000000030422BCAC00010478EF
+:102F50000622BCB0000000030422BCBC00010479BE
+:102F60000622880000000100062280000000020006
+:102F7000042212700010047A06223000000000C003
+:102F800006226700000001000622900000000400F5
+:102F900004226B080020048A022212C0FFFFFFFFF8
+:102FA000062211E800000002062212C800000009F3
+:102FB000062212EC0000000906228C000000000826
+:102FC0000222114800000000062213200000000623
+:102FD000062233000000000206226040000000309C
+:102FE00006228C20000000080222114C0000000084
+:102FF00006221338000000060622330800000002F3
+:10300000062261000000003006228C40000000080B
+:10301000022211500000000006221350000000069A
+:103020000622331000000002062261C000000030BA
+:1030300006228C60000000080222115400000000EB
+:103040000622136800000006062233180000000262
+:10305000062262800000003006228C8000000008FA
+:103060000222115800000000062213800000000612
+:1030700006223320000000020622634000000030D8
+:1030800006228CA0000000080222115C0000000053
+:1030900006221398000000060622332800000002D2
+:1030A000062264000000003006228CC000000008E8
+:1030B0000222116000000000062213B0000000068A
+:1030C0000622333000000002062264C000000030F7
+:1030D00006228CE0000000080222116400000000BB
+:1030E000062213C800000006062233380000000242
+:1030F0000622658000000030021610000000002843
+:1031000002170008000000020217002C0000000354
+:103110000217003C000000040217004800000002F3
+:103120000217004C000000900217005000000090B1
+:103130000217005400800090021700580810000089
+:10314000021700600000008A02170064000000807F
+:1031500002170068000000810217006C0000008068
+:10316000021700700000000602170078000007D068
+:103170000217007C0000076C02170038007C100466
+:10318000021700040000000F061640240000000291
+:10319000021640700000001C0216420800000001E8
+:1031A0000216421000000001021642200000000139
+:1031B0000216422800000001021642300000000101
+:1031C00002164238000000010216426000000002B0
+:1031D0000C16401C0003D0900A16401C0000009CF6
+:1031E0000B16401C000009C4021640300000000805
+:1031F000021640340000000C021640380000001097
+:1032000002164044000000200216400000000001A9
+:10321000021640D80000000102164008000000011C
+:103220000216400C000000010216401000000001D0
+:103230000216424000000000021642480000000052
+:103240000616427000000002021642500000000004
+:1032500002164258000000000616428000000002DC
+:1032600002166008000012240216600C0000121002
+:1032700002166010000012140216601C0000FFFF0E
+:10328000021660200000FFFF021660240000FFFF0E
+:10329000021660280000FFFF0216603800000020C0
+:1032A0000216603C0000002006166040000000028C
+:1032B00002166048000000230216604C0000002443
+:1032C000021660500000002502166054000000261F
+:1032D00002166058000000270216605C00000029FA
+:1032E000021660600000002A021660640000002BD5
+:1032F000021660680000002C0216606C0000002DB1
+:1033000002166070000000EC0216607400000011EC
+:1033100002166078000000120616607C0000000FA4
+:10332000021660B800000001021660BC0000000137
+:10333000061660C00000000C021660F000000001DC
+:10334000061660F400000031021661B800000001AA
+:10335000061661BC0000000D021661F000000001BD
+:10336000061661F4000000110216623807FFFFFF25
+:103370000216623C0000003F0216624007FFFFFF9A
+:10338000021662440000000F0116624800000000AF
+:103390000116624C0000000001166250000000009F
+:1033A000011662540000000001166258000000007F
+:1033B0000116625C0000000001166260000000005F
+:1033C000011662640000000001166268000000003F
+:1033D0000116626C0000000001166270000000001F
+:1033E00001166274000000000116627800000000FF
+:1033F0000116627C000000000C166000000003E86B
+:103400000A166000000000010B1660000000000AB0
+:1034100002168040000000060216804400000005ED
+:10342000021680480000000A0216804C00000005C9
+:103430000216805400000002021680CC0000000436
+:10344000021680D000000004021680D400000004A0
+:10345000021680D800000004021680DC0000000480
+:10346000021680E000000004021680E40000000460
+:10347000021680E800000004021688040000000420
+:10348000021680300000007C021680340000003DEF
+:10349000021680380000003F0216803C0000009CAD
+:1034A000021680F000000007061680F400000005F8
+:1034B0000216880C010101010216810800000000BB
+:1034C0000216810C000000040216811000000004A6
+:1034D0000216811400000002021688100801200460
+:1034E00002168118000000050216811C000000056C
+:1034F000021681200000000502168124000000054C
+:103500000216882C200810010216812800000008ED
+:103510000216812C00000006021681300000000710
+:1035200002168134000000000216883001010120DB
+:1035300006168138000000040216883401010101DA
+:1035400002168148000000000216814C00000004B1
+:10355000021681500000000402168154000000028F
+:103560000216883808012004021681580000000560
+:103570000216815C00000005021681600000000553
+:1035800002168164000000050216883C2008100124
+:1035900002168168000000080216816C0000000617
+:1035A00002168170000000070216817400000001FD
+:1035B00002168840010101200216817800000001F6
+:1035C0000216817C000000010216818000000001CB
+:1035D00002168184000000010216884401010101E5
+:1035E00002168188000000010216818C0000000490
+:1035F000021681900000000402168194000000026F
+:10360000021688480801200402168198000000056F
+:103610000216819C00000005021681A00000000532
+:10362000021681A40000000502168814200810016B
+:10363000021681A800000008021681AC00000006F6
+:10364000021681B000000007021681B400000001DC
+:103650000216881801010120021681B8000000013D
+:10366000021681BC00000001021681C000000001AA
+:10367000021681C4000000010216881C010101012C
+:10368000021681C800000001021681CC000000046F
+:10369000021681D000000004021681D4000000024E
+:1036A0000216882008012004021681D800000005B7
+:1036B000021681DC00000005021681E00000000512
+:1036C000021681E40000000502168824200810017B
+:1036D000021681E800000008021681EC00000006D6
+:1036E000021681F0000000070216E40C0000000042
+:1036F00002168828010101200616E41000000004CB
+:103700000216E000010101010216E42000000000A1
+:103710000216E424000000040216E428000000045D
+:103720000216E42C000000020216E0040801200446
+:103730000216E430000000050216E4340000000523
+:103740000216E438000000050216E43C0000000503
+:103750000216E008200810010216E44000000008EC
+:103760000216E444000000060216E44800000007C8
+:103770000216E44C000000000216E00C01010120DA
+:103780000616E450000000040216E01001010101D9
+:103790000216E460000000000216E4640000000469
+:1037A0000216E468000000040216E46C0000000247
+:1037B0000216E014080120040216E470000000055F
+:1037C0000216E474000000050216E478000000050B
+:1037D0000216E47C000000050216E0182008100123
+:1037E0000216E480000000080216E48400000006CF
+:1037F0000216E488000000070216E48C00000001B5
+:103800000216E01C010101200216E49000000001F4
+:103810000216E494000000010216E4980000000182
+:103820000216E49C000000010216E02001010101E3
+:103830000216E4A0000000010216E4A40000000447
+:103840000216E4A8000000040216E4AC0000000226
+:103850000216E024080120040216E4B0000000056E
+:103860000216E4B4000000050216E4B800000005EA
+:103870000216E4BC000000050216E0282008100132
+:103880000216E4C0000000080216E4C400000006AE
+:103890000216E4C8000000070216E4CC0000000194
+:1038A0000216E02C010101200216E4D00000000104
+:1038B0000216E4D4000000010216E4D80000000162
+:1038C0000216E4DC000000010216E03001010101F3
+:1038D0000216E4E0000000010216E4E40000000427
+:1038E0000216E4E8000000040216E4EC0000000206
+:1038F0000216E034080120040216E4F0000000057E
+:103900000216E4F4000000050216E4F800000005C9
+:103910000216E4FC000000050216E0382008100141
+:103920000216E500000000080216E504000000068B
+:103930000216E508000000070216E03C0101012024
+:1039400002168240003F003F021682440000000041
+:103950000216E524003F003F0216E52800000000A3
+:1039600002168248000000000216824C003F003F11
+:103970000216E52C000000000216E530003F003F73
+:10398000021682500100010002168254010001005B
+:103990000216E534010001000216E53801000100BD
+:1039A00006168258000000020216E53C00000000E6
+:1039B0000216E540000000000216826000C000C050
+:1039C0000216826400C000C00216E54400C000C0B8
+:1039D0000216E54800C000C0021682681E001E00E4
+:1039E0000216826C1E001E000216E54C1E001E0010
+:1039F0000216E5501E001E000216827040004000B4
+:103A000002168274400040000216E5544000400057
+:103A10000216E558400040000216827880008000BF
+:103A20000216827C800080000216E55C8000800027
+:103A30000216E560800080000216828020002000CF
+:103A400002168284200020000216E5642000200077
+:103A50000216E56820002000061682880000000299
+:103A60000216E56C000000000216E5700000000080
+:103A700002168290000000000216829400000000EE
+:103A80000216E574000000000216E5780000000050
+:103A900002168298000000000216829C00000000BE
+:103AA0000216E57C000000000216E5800000000020
+:103AB000021682A000000000021682A4000000018D
+:103AC000061682A80000000A021681F400000C0805
+:103AD000021681F800000040021681FC000001007F
+:103AE0000216820000000020021682040000001767
+:103AF00002168208000000800216820C00000200FC
+:103B000002168210000000000216821801FF01FF59
+:103B10000216821401FF01FF0216E51001FF01FFEA
+:103B20000216E50C01FF01FF0216823C00000013A3
+:103B3000021680900000013F0216806000000140E4
+:103B40000216806400000140061680680000000232
+:103B500002168070000000C0061680740000000786
+:103B60000216809C00000048021680A00000004859
+:103B7000061680A400000002021680AC0000004877
+:103B8000061680B000000007021682380000800090
+:103B900002168234000025E40216809400007FFFA4
+:103BA00002168220000F000F0216821C000F000F69
+:103BB0000216E518000F000F0216E514000F000FA3
+:103BC000021682280000000002168224FFFFFFFF79
+:103BD0000216E520000000000216E51CFFFFFFFFB3
+:103BE0000216E6BC000000000216E6C0000000025B
+:103BF0000216E6C4000000010216E6C80000000339
+:103C00000216E6CC000000040216E6D00000000612
+:103C10000216E6D4000000050216E6D800000007F0
+:103C2000021680EC000000FF0214000000000001FA
+:103C30000214000C0000000102140040000000010A
+:103C40000214004400007FFF0214000C000000007A
+:103C500002140000000000000214006C00000000CC
+:103C600002140004000000010214003000000001F2
+:103C700002140004000000000214005C00000000B8
+:103C800002140008000000010214003400000001CA
+:103C90000214000800000000021400600000000090
+:103CA00006028000000020000202005800000032DE
+:103CB000020200A003150020020200A40315002048
+:103CC000020200A801000030020200AC081000004F
+:103CD000020200B000000033020200B40000003015
+:103CE000020200B800000031020200BC0000000324
+:103CF000020200C000000006020200C4000000032F
+:103D0000020200C800000003020200CC0000000212
+:103D1000020200D000000000020200D400000002F5
+:103D2000020200DC00000000020200E000000006C9
+:103D3000020200E400000004020200E800000002A9
+:103D4000020200EC00000002020200F0000000018C
+:103D5000020200FC00000006020201200000000038
+:103D60000202013400000002020201B00000000162
+:103D70000202020C00000001020202140000000115
+:103D80000202021800000002020204040000000106
+:103D90000202040C00000040020204100000004077
+:103DA0000202041C000000040202042000000020A3
+:103DB0000202042400000002020204280000002085
+:103DC000060205000000001204020480002004AA7C
+:103DD000020200600000000F020200640000000701
+:103DE00002020068000000000202006C0000000EE9
+:103DF000020200700000000E0602007400000003C2
+:103E0000020200F4000000040202000400000001AD
+:103E100002020008000000010202000C0000000184
+:103E20000202001000000001020200140000000164
+:103E300002020018000000010202001C0000000144
+:103E40000202002000000001020200240000000124
+:103E500002020028000000010202002C0000000104
+:103E600002020030000000010202003400000001E4
+:103E700002020038000000010202003C00000001C4
+:103E800002020040000000010202004400000001A4
+:103E900002020048000000010202004C0000000184
+:103EA000020200500000000102020108000000C8E8
+:103EB0000202011800000002020201C4000000001A
+:103EC000020201CC00000000020201D40000000246
+:103ED000020201DC00000002020201E4000000FF17
+:103EE000020201EC000000FF0202010000000000DD
+:103EF0000202010C000000C80202011C00000002C6
+:103F0000020201C800000000020201D0000000000F
+:103F1000020201D800000002020201E000000002DB
+:103F2000020201E8000000FF020201F0000000FFB1
+:103F3000020201040000000002020108000000C8A3
+:103F40000202011800000002020201C40000000089
+:103F5000020201CC00000000020201D400000002B5
+:103F6000020201DC00000002020201E4000000FF86
+:103F7000020201EC000000FF02020100000000004C
+:103F80000202010C000000C80202011C0000000235
+:103F9000020201C800000000020201D0000000007F
+:103FA000020201D800000002020201E0000000024B
+:103FB000020201E8000000FF020201F0000000FF21
+:103FC000020201040000000002020108000000C813
+:103FD0000202011800000002020201C400000000F9
+:103FE000020201CC00000000020201D40000000225
+:103FF000020201DC00000002020201E4000000FFF6
+:10400000020201EC000000FF0202010000000000BB
+:104010000202010C000000C80202011C00000002A4
+:10402000020201C800000000020201D000000000EE
+:10403000020201D800000002020201E000000002BA
+:10404000020201E8000000FF020201F0000000FF90
+:10405000020201040000000002020108000000C882
+:104060000202011800000002020201C40000000068
+:10407000020201CC00000000020201D40000000294
+:10408000020201DC00000002020201E4000000FF65
+:10409000020201EC000000FF02020100000000002B
+:1040A0000202010C000000C80202011C0000000214
+:1040B000020201C800000000020201D0000000005E
+:1040C000020201D800000002020201E0000000022A
+:1040D000020201E8000000FF020201F0000000FF00
+:1040E00002020104000000000728040000A30000F1
+:1040F000082807B8000904CA072C000034F10000A2
+:10410000072C800038A60D3D072D000037B61B6731
+:10411000072D800032632955072E00001C6835EEFC
+:10412000082E48B036EA04CC012800000000000048
+:104130000128000400000000012800080000000021
+:104140000128000C00000000012800100000000001
+:1041500001280014000000000228002000000001D7
+:1041600002280024000000020228002800000003AA
+:104170000228002C0000000002280030000000048B
+:10418000022800340000000102280038000000006E
+:104190000228003C0000000102280040000000044A
+:1041A000022800440000000002280048000000012E
+:1041B0000228004C0000000302280050000000000C
+:1041C00002280054000000010228005800000004EA
+:1041D0000228005C000000000228006000000001CE
+:1041E00002280064000000030228006800000000AC
+:1041F0000228006C0000000102280070000000048A
+:10420000022800740000000002280078000000046A
+:104210000228007C00000003062800800000000245
+:10422000022800A400003FFF022800A8000003FFAE
+:1042300002280224000000000228023400000000CE
+:104240000228024C00000000022802E40000FFFFE8
+:104250000628200000000800022B8BC0000000018F
+:10426000022B800000000000022B8040000000189C
+:10427000022B80800000000C022B80C00000006632
+:104280000C2B83000007A1200A2B830000000138BB
+:104290000B2B8300000013880A2B834000000000D2
+:1042A0000C2B8340000001F40B2B83400000000521
+:1042B000022B83800007A120022B83C0000001F4A1
+:1042C000022B1480000000010A2B14800000000063
+:1042D000062A9AF800000004042A9B08000204CE73
+:1042E000062A9B1000000006062A90800000004865
+:1042F000062A2008000000C8062A2000000000024C
+:10430000062A91A800000086062A900000000020DE
+:10431000062A93C800000003042A93D4000104D0A5
+:10432000062A9DA800000002042A9498000404D1E3
+:10433000042A9D58000104D5062A9D5C0000001146
+:10434000042ACB20001004D6042A3000000204E620
+:10435000062A300800000100062A40400000001034
+:10436000042A4000001004E8042A8408000204F82B
+:10437000062A9DA000000002062AB000000000509E
+:10438000062ABB7000000070062AB150000000022F
+:10439000062ABB6000000004062AD00000000800C6
+:1043A000062AC00000000150062A94A8000000322E
+:1043B000062A502000000002062A503000000002A9
+:1043C000062A500000000002062A501000000002D9
+:1043D000022A520800000001042A9B28000204FA65
+:1043E000062A963800000022042A96C0000104FC28
+:1043F000062A96C400000003062A976800000022DF
+:10440000042A97F0000104FD062A97F40000000337
+:10441000062A989800000022042A9920000104FE30
+:10442000062A992400000003062A99C800000022E9
+:10443000042A9A50000104FF062A9A54000000033F
+:10444000062AB14000000002062AC54000000150C3
+:10445000062A957000000032062A5028000000024B
+:10446000062A503800000002062A50080000000208
+:10447000062A501800000002022A520C0000000117
+:10448000042A9B3000020500062A96D00000002274
+:10449000042A975800010502062A975C00000003D1
+:1044A000062A980000000022042A988800010503CB
+:1044B000062A988C00000003062A9930000000228A
+:1044C000042A99B800010504062A99BC00000003DB
+:1044D000062A9A6000000022042A9AE800010505D5
+:1044E000062A9AEC00000003062AB14800000002E8
+:1044F000022ACA8000000000042A9B38001005062A
+:10450000062A50480000000E022ACA84000000005B
+:10451000042A9B7800100516062A50800000000E21
+:10452000022ACA8800000000042A9BB80010052651
+:10453000062A50B80000000E022ACA8C00000000B3
+:10454000042A9BF800100536062A50F00000000EE1
+:10455000022ACA9000000000042A9C380010054678
+:10456000062A51280000000E022ACA94000000000A
+:10457000042A9C7800100556062A51600000000E9F
+:10458000022ACA9800000000042A9CB800100566A0
+:10459000062A51980000000E022ACA9C0000000062
+:1045A000042A9CF800100576062A51D00000000E5F
+:1045B000021010080000000102101050000000015D
+:1045C000021010000003D000021010040000003D93
+:1045D0000910180002000586091011000010078656
+:1045E0000610114000000008091011600010079625
+:1045F000061011A00000001806102400000000E0C2
+:104600000210201C00000000021020200000000109
+:10461000021020C00000000202102004000000016F
+:10462000021020080000000109103C00000507A648
+:1046300009103800000507AB09103820000507B045
+:1046400006104C000000010002104028000000107D
+:104650000210404400003FFF0210405800280000B4
+:10466000021040840084924A02104058000000006A
+:104670000210800000001080021080AC00000000DA
+:1046800002108038000000100210810000000000BD
+:10469000061081200000000202108008000002B510
+:1046A0000210801000000000061082000000004A86
+:1046B000021081080001FFFF061081400000000287
+:1046C0000210800000001A800610900000000024F4
+:1046D000061091200000004A061093700000004A66
+:1046E000061095C00000004A0210800400001080EF
+:1046F000021080B0000000010210803C0000001099
+:104700000210810400000000061081280000000251
+:104710000210800C000002B502108014000000009E
+:10472000061084000000004A0210810C0001FFFF07
+:1047300006108148000000020210800400001A8068
+:104740000610909000000024061092480000004AD5
+:10475000061094980000004A061096E80000004AEF
+:104760000210800000001080021080AC00000002E7
+:1047700002108038000000100210810000000000CC
+:10478000061081200000000202108008000002B51F
+:104790000210801000000000061082000000004A95
+:1047A000021081080001FFFF061081400000000296
+:1047B0000210800000001A80061090000000002403
+:1047C000061091200000004A061093700000004A75
+:1047D000061095C00000004A0210800400001080FE
+:1047E000021080B0000000030210803C00000010A6
+:1047F0000210810400000000061081280000000261
+:104800000210800C000002B50210801400000000AD
+:10481000061084000000004A0210810C0001FFFF16
+:1048200006108148000000020210800400001A8077
+:104830000610909000000024061092480000004AE4
+:10484000061094980000004A061096E80000004AFE
+:104850000210800000001080021080AC00000004F4
+:1048600002108038000000100210810000000000DB
+:10487000061081200000000202108008000002B52E
+:104880000210801000000000061082000000004AA4
+:10489000021081080001FFFF0610814000000002A5
+:1048A0000210800000001A80061090000000002412
+:1048B000061091200000004A061093700000004A84
+:1048C000061095C00000004A02108004000010800D
+:1048D000021080B0000000050210803C00000010B3
+:1048E0000210810400000000061081280000000270
+:1048F0000210800C000002B50210801400000000BD
+:10490000061084000000004A0210810C0001FFFF25
+:1049100006108148000000020210800400001A8086
+:104920000610909000000024061092480000004AF3
+:10493000061094980000004A061096E80000004A0D
+:104940000210800000001080021080AC0000000601
+:1049500002108038000000100210810000000000EA
+:10496000061081200000000202108008000002B53D
+:104970000210801000000000061082000000004AB3
+:10498000021081080001FFFF0610814000000002B4
+:104990000210800000001A80061090000000002421
+:1049A000061091200000004A061093700000004A93
+:1049B000061095C00000004A02108004000010801C
+:1049C000021080B0000000070210803C00000010C0
+:1049D000021081040000000006108128000000027F
+:1049E0000210800C000002B50210801400000000CC
+:1049F000061084000000004A0210810C0001FFFF35
+:104A000006108148000000020210800400001A8095
+:104A10000610909000000024061092480000004A02
+:104A2000061094980000004A061096E80000004A1C
+:104A3000021205B0000000010212049000E383405E
+:104A40000212051400003C100212066C0000000166
+:104A5000021206700000000002120494FFFFFFFF24
+:104A600002120498FFFFFFFF0212049CFFFFFFFFEA
+:104A7000021204A0FFFFFFFF021204A4FFFFFFFFCA
+:104A8000021204A8FFFFFFFF021204ACFFFFFFFFAA
+:104A9000021204B0FFFFFFFF021204BCFFFFFFFF82
+:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
+:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
+:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
+:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
+:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
+:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
+:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
+:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
+:104B200002120504FFFFFFFF02120508FFFFFFFF4F
+:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
+:104B4000021204D4FF809000021204B4F00050005E
+:104B5000021204B8F00010000212039000000008D6
+:104B60000212039C00000008021203A000000008CB
+:104B7000021203A400000002021203BC00000004A1
+:104B8000021203C000000005021203C4000000046A
+:104B9000021203D0000000000212036C00000001AA
+:104BA000021203680000003F021201BC0000004036
+:104BB000021201C000001808021201C4000008031C
+:104BC000021201C800000803021201CC00000040DC
+:104BD000021201D000000003021201D400000803F9
+:104BE000021201D800000803021201DC00000803D1
+:104BF000021201E000010003021201E400000803B8
+:104C0000021201E800000803021201EC0000000398
+:104C1000021201F000000003021201F40000000380
+:104C2000021201F800000003021201FC0000000360
+:104C3000021202000000000302120204000000033E
+:104C400002120208000000030212020C000000031E
+:104C500002120210000000030212021400000003FE
+:104C600002120218000000030212021C00000003DE
+:104C700002120220000000030212022400000003BE
+:104C800002120228000024030212022C0000002F4E
+:104C90000212023000000009021202340000001962
+:104CA00002120238000001840212023C000001835B
+:104CB0000212024000000306021202440000001922
+:104CC00002120248000000060212024C0000030615
+:104CD00002120250000003060212025400000306F2
+:104CE0000212025800000C860212025C0000030649
+:104CF00002120260000003060212026400000006B5
+:104D000002120268000000060212026C0000000697
+:104D10000212027000000006021202740000000677
+:104D200002120278000000060212027C0000000657
+:104D30000212028000000006021202840000000637
+:104D400002120288000000060212028C0000000617
+:104D500002120290000000060212029400000006F7
+:104D600002120298000000060212029C00000006D7
+:104D7000021202A000000306021202A400000013A7
+:104D8000021202A800000006021202B00000100485
+:104D9000021202B400001004021203240010644046
+:104DA0000212032800106440021205B40000000142
+:104DB000021201B0000000010600A0000000000C7B
+:104DC0000200A050000000000200A05400000000FB
+:104DD0000200A0EC555400000200A0F055555555B6
+:104DE0000200A0F4000055550200A0F8F0000000F9
+:104DF0000200A0FC555400000200A1005555555575
+:104E00000200A104000055550200A108F0000000B6
+:104E10000200A18C555400000200A1905555555533
+:104E20000200A194000055550200A198F000000076
+:104E30000200A19C000000000200A1A000010000EF
+:104E40000200A1A4000050140200A1A8000000006C
+:104E50000200A45C00000C000200A61C000000037D
+:104E60000200A06CFF5C00000200A070FFF55FFF75
+:104E70000200A0740000FFFF0200A078F00003E031
+:104E80000200A07C000000000200A0800000A00042
+:104E90000600A084000000050200A0980FE00000BA
+:104EA0000600A09C000000070200A0B8000004005B
+:104EB0000600A0BC000000030200A0C80000100013
+:104EC0000600A0CC000000030200A0D800004000B3
+:104ED0000600A0DC000000030200A0E800010000C2
+:104EE0000600A22C000000040200A10CFF5C0000E0
+:104EF0000200A110FFF55FFF0200A1140000FFFFF8
+:104F00000200A118F00003E00200A11C0000000054
+:104F10000200A1200000A0000600A124000000055E
+:104F20000200A1380FE000000600A13C00000007CD
+:104F30000200A158000008000600A15C0000000368
+:104F40000200A168000020000600A16C0000000320
+:104F50000200A178000080000600A17C0000000390
+:104F60000200A188000200000600A23C000000042C
+:104F70000200A030000000000200A0340000000089
+:104F80000200A038000000000200A03C0000000069
+:104F90000200A040000000000200A0440000000049
+:104FA0000200A048000000000200A04C0000000029
+:104FB00000000000000000000000003000000000C1
+:104FC00000000000000000000000000000000000E1
+:104FD00000000000000000000000000000000000D1
+:104FE0000000000000300031000000000000000060
+:104FF00000000000000000000000000000000000B1
+:1050000000000000000000000000000000000000A0
+:10501000003100520000000000000000000000000D
+:105020000000000000000000000000000000000080
+:105030000000000000000000000000000052008995
+:1050400000000000000000000089008D008D00912C
+:1050500000910095009500990099009D009D00A188
+:1050600000A100A500A500A900A900AE00AE00B1F6
+:1050700000B100B4000000000000000000000000CB
+:105080000000000000000000000000000000000020
+:105090000000000000B40309030903130313031DF8
+:1050A000031D03240324032B032B03320332033990
+:1050B00003390340034003470347034E034E0355A0
+:1050C00000000000000000000000000000000000E0
+:1050D00000000000000000000000000000000000D0
+:1050E00000000000000000000000000000000000C0
+:1050F00000000000000000000000000000000000B0
+:10510000000000000000000000000000000000009F
+:10511000000000000000000000000000000000008F
+:10512000000000000000000000000000000000007F
+:10513000000000000000000000000000000000006F
+:10514000000000000000000000000000000000005F
+:10515000000000000000000000000000000000004F
+:10516000000000000000000000000000000000003F
+:105170000355035B0000000000000000035B035CBC
+:10518000035C035D035D035E035E035F035F036017
+:1051900003600361036103620362036300000000B4
+:1051A00000000000000000000000000000000000FF
+:1051B00000000000000000000000000000000000EF
+:1051C00000000000000000000363036D036D037B1B
+:1051D000037B0389000000000000000000000000C5
+:1051E00000000000000000000000000000000000BF
+:1051F00000000000000000000000000000000000AF
+:10520000000000000000000000000000000000009E
+:10521000000000000000000000000000000000008E
+:105220000389038A00000000000000000000000065
+:10523000000000000000000000000000000000006E
+:10524000000000000000000000000000038A03D6F8
+:10525000000000000000000000000000000000004E
+:10526000000000000000000000000000000000003E
+:10527000000000000000000003D604010000000050
+:10528000000000000000000000000000000000001E
+:10529000000000000000000000000000000000000E
+:1052A00000000000040104330000000000000000C2
+:1052B0000433043A043A0441044104480448044FC6
+:1052C000044F04560456045D045D04640464046BD6
+:1052D000046B04A4000000000000000004A404A863
+:1052E00004A804AC04AC04B004B004B404B404B81E
+:1052F00004B804BC04BC04C004C004C404C4051342
+:105300000513052A052A05410541054305430545C1
+:1053100005450547054705490549054B054B054D1D
+:10532000054D054F054F0551055105E805E805E90F
+:1053300005E905EA05EA05EF05EF05F405F405F9C9
+:1053400005F905FE05FE0603060306080608060D18
+:10535000060D0612061206130000000000000000F1
+:10536000000000000000000000000000000000003D
+:10537000000000000000000000000000000000002D
+:1053800006130624000000000000000000000000DA
+:10539000000000000000000000000000000000000D
+:1053A0000000000000000000000000000624063994
+:1053B0000639063C063C063F0000000000000000E5
+:1053C00000000000000000000000000000000000DD
+:1053D0000000000000000000063F0675000000000D
+:1053E00000000000000000000000000000000000BD
+:1053F00000000000000000000000000000000000AD
+:1054000000000000067507780000000000000000A2
+:10541000000000000000000000000000000000008C
+:10542000000000000000000000000000000000007C
+:105430000778077F077F078307830787000000003F
+:10544000000000000000000000000000000000005C
+:10545000000000000000000000000000078707C8EF
+:10546000000000000000000007C807D107D107DADC
+:1054700007DA07E307E307EC07EC07F507F507FE94
+:1054800007FE080708070810081008670867087C67
+:10549000087C089108910894089408970897089A3E
+:1054A000089A089D089D08A008A008A308A308A6BC
+:1054B00008A608A908A908B2000000000000000022
+:1054C00000000000000000000000000000000000DC
+:1054D00000000000000000000000000000000000CC
+:1054E00008B208B800000000000000000000000042
+:1054F00000000000000000000000000000000000AC
+:1055000000000000000000000000000008B808BB18
+:10551000000000000000000000000000000000008B
+:10552000000000000000000000000000000000007B
+:10553000000000000000000008BB08C100000000DF
+:10554000000000000000000000000000000000005B
+:10555000000000000000000000000000000000004B
+:10556000000000000000000000000000000000003B
+:1055700008C108D008D008DF08DF08EE08EE08FDF3
+:1055800008FD090C090C091B091B092A092A0939FC
+:10559000093909AA00000000000000000000000016
+:1055A00000000000000000000000000000000000FB
+:1055B00000000000000000000000000009AA09BF70
+:1055C00009BF09D009D009E109E109E209E209E3CB
+:1055D00009E309E409E409E509E509E609E609E75B
+:1055E00009E709E809E809E90000000000000000F7
+:1055F00000000000000000000000000000000000AB
+:10560000000000000000000000000000000000009A
+:10561000000000000000000000000000000000008A
+:10562000000000000000000000000000000000007A
+:10563000000000000000000000000000000000006A
+:10564000000000000000000000000000000000005A
+:10565000000000000000000000000000000000004A
+:10566000000000000000000000000000000000003A
+:10567000000000000000000000000000000000002A
+:10568000000000000000000000000000000000001A
+:10569000000000000000000000000000000000000A
+:1056A00000000000000000000000000000000000FA
+:1056B00000000000000000000000000000000000EA
+:1056C000000000000000000000010000000204C013
+:1056D0000003098000040E4000051300000617C0F7
+:1056E00000071C800008214000092600000A2AC08B
+:1056F000000B2F80000C3440000D3900000E3DC01F
+:10570000000F42800010474000114C00001250C0B2
+:105710000013558000145A4000155F00001663C046
+:105720000017688000186D4000197200001A76C0DA
+:10573000001B7B80001C8040001D8500001E89C06E
+:10574000001F8E80000093400000200000004000F9
+:1057500000006000000080000000A0000000C00009
+:105760000000E000000100000001200000014000F6
+:1057700000016000000180000001A0000001C000E5
+:105780000001E000000200000002200000024000D2
+:1057900000026000000280000002A0000002C000C1
+:1057A0000002E000000300000003200000034000AE
+:1057B00000036000000380000003A0000003C0009D
+:1057C0000003E0000004000000042000000440008A
+:1057D00000046000000480000004A0000004C00079
+:1057E0000004E00000050000000520000005400066
+:1057F00000056000000580000005A0000005C00055
+:105800000005E00000060000000620000006400041
+:1058100000066000000680000006A0000006C00030
+:105820000006E0000007000000072000000740001D
+:1058300000076000000780000007A0000007C0000C
+:105840000007E000000800000008200000084000F9
+:1058500000086000000880000008A0000008C000E8
+:105860000008E000000900000009200000094000D5
+:1058700000096000000980000009A0000009C000C4
+:105880000009E000000A0000000A2000000A4000B1
+:10589000000A6000000A8000000AA000000AC000A0
+:1058A000000AE000000B0000000B2000000B40008D
+:1058B000000B6000000B8000000BA000000BC0007C
+:1058C000000BE000000C0000000C2000000C400069
+:1058D000000C6000000C8000000CA000000CC00058
+:1058E000000CE000000D0000000D2000000D400045
+:1058F000000D6000000D8000000DA000000DC00034
+:10590000000DE000000E0000000E2000000E400020
+:10591000000E6000000E8000000EA000000EC0000F
+:10592000000EE000000F0000000F2000000F4000FC
+:10593000000F6000000F8000000FA000000FC000EB
+:10594000000FE000001000000010200000104000D8
+:1059500000106000001080000010A0000010C000C7
+:105960000010E000001100000011200000114000B4
+:1059700000116000001180000011A0000011C000A3
+:105980000011E00000120000001220000012400090
+:1059900000126000001280000012A0000012C0007F
+:1059A0000012E0000013000000132000001340006C
+:1059B00000136000001380000013A0000013C0005B
+:1059C0000013E00000140000001420000014400048
+:1059D00000146000001480000014A0000014C00037
+:1059E0000014E00000150000001520000015400024
+:1059F00000156000001580000015A0000015C00013
+:105A00000015E000001600000016200000164000FF
+:105A100000166000001680000016A0000016C000EE
+:105A20000016E000001700000017200000174000DB
+:105A300000176000001780000017A0000017C000CA
+:105A40000017E000001800000018200000184000B7
+:105A500000186000001880000018A0000018C000A6
+:105A60000018E00000190000001920000019400093
+:105A700000196000001980000019A0000019C00082
+:105A80000019E000001A0000001A2000001A40006F
+:105A9000001A6000001A8000001AA000001AC0005E
+:105AA000001AE000001B0000001B2000001B40004B
+:105AB000001B6000001B8000001BA000001BC0003A
+:105AC000001BE000001C0000001C2000001C400027
+:105AD000001C6000001C8000001CA000001CC00016
+:105AE000001CE000001D0000001D2000001D400003
+:105AF000001D6000001D8000001DA000001DC000F2
+:105B0000001DE000001E0000001E2000001E4000DE
+:105B1000001E6000001E8000001EA000001EC000CD
+:105B2000001EE000001F0000001F2000001F4000BA
+:105B3000001F6000001F8000001FA000001FC000A9
+:105B4000001FE00000200000002020000020400096
+:105B500000206000002080000020A0000020C00085
+:105B60000020E00000210000002120000021400072
+:105B700000216000002180000021A0000021C00061
+:105B80000021E0000022000000222000002240004E
+:105B900000226000002280000022A0000022C0003D
+:105BA0000022E0000023000000232000002340002A
+:105BB00000236000002380000023A0000023C00019
+:105BC0000023E00000240000002420000024400006
+:105BD00000246000002480000024A0000024C000F5
+:105BE0000024E000002500000025200000254000E2
+:105BF00000256000002580000025A0000025C000D1
+:105C00000025E000002600000026200000264000BD
+:105C100000266000002680000026A0000026C000AC
+:105C20000026E00000270000002720000027400099
+:105C300000276000002780000027A0000027C00088
+:105C40000027E00000280000002820000028400075
+:105C500000286000002880000028A0000028C00064
+:105C60000028E00000290000002920000029400051
+:105C700000296000002980000029A0000029C00040
+:105C80000029E000002A0000002A2000002A40002D
+:105C9000002A6000002A8000002AA000002AC0001C
+:105CA000002AE000002B0000002B2000002B400009
+:105CB000002B6000002B8000002BA000002BC000F8
+:105CC000002BE000002C0000002C2000002C4000E5
+:105CD000002C6000002C8000002CA000002CC000D4
+:105CE000002CE000002D0000002D2000002D4000C1
+:105CF000002D6000002D8000002DA000002DC000B0
+:105D0000002DE000002E0000002E2000002E40009C
+:105D1000002E6000002E8000002EA000002EC0008B
+:105D2000002EE000002F0000002F2000002F400078
+:105D3000002F6000002F8000002FA000002FC00067
+:105D4000002FE00000300000003020000030400054
+:105D500000306000003080000030A0000030C00043
+:105D60000030E00000310000003120000031400030
+:105D700000316000003180000031A0000031C0001F
+:105D80000031E0000032000000322000003240000C
+:105D900000326000003280000032A0000032C000FB
+:105DA0000032E000003300000033200000334000E8
+:105DB00000336000003380000033A0000033C000D7
+:105DC0000033E000003400000034200000344000C4
+:105DD00000346000003480000034A0000034C000B3
+:105DE0000034E000003500000035200000354000A0
+:105DF00000356000003580000035A0000035C0008F
+:105E00000035E0000036000000362000003640007B
+:105E100000366000003680000036A0000036C0006A
+:105E20000036E00000370000003720000037400057
+:105E300000376000003780000037A0000037C00046
+:105E40000037E00000380000003820000038400033
+:105E500000386000003880000038A0000038C00022
+:105E60000038E0000039000000392000003940000F
+:105E700000396000003980000039A0000039C000FE
+:105E80000039E000003A0000003A2000003A4000EB
+:105E9000003A6000003A8000003AA000003AC000DA
+:105EA000003AE000003B0000003B2000003B4000C7
+:105EB000003B6000003B8000003BA000003BC000B6
+:105EC000003BE000003C0000003C2000003C4000A3
+:105ED000003C6000003C8000003CA000003CC00092
+:105EE000003CE000003D0000003D2000003D40007F
+:105EF000003D6000003D8000003DA000003DC0006E
+:105F0000003DE000003E0000003E2000003E40005A
+:105F1000003E6000003E8000003EA000003EC00049
+:105F2000003EE000003F0000003F2000003F400036
+:105F3000003F6000003F8000003FA000003FC00025
+:105F4000003FE000003FE00100000000000001FF12
+:105F50000000020000007FF800007FF80000014010
+:105F600000003500000000010000FF0000000000FC
+:105F70000000FF00000000000000FF000000000023
+:105F80000000FF00000000000000FF000000000013
+:105F90000000FF00000000000000FF000000000003
+:105FA0000000FF000000000000000000140AFF00D5
+:105FB00000000001000000000020100100000000AF
+:105FC0000100900000000100000090020000900419
+:105FD00000009006000090080000900A0000900C5D
+:105FE0000000900E0000901000009012000090142D
+:105FF00000009016000090180000901A0000901CFD
+:106000000000901E000090200000902200009024CC
+:1060100000009026000090280000902A0000902C9C
+:106020000000902E0000903000009032000090346C
+:1060300000009036000090380000903A0000903C3C
+:106040000000903E0000904000009042000090440C
+:1060500000009046000090480000904A0000904CDC
+:106060000000904E000090500000905200009054AC
+:1060700000009056000090580000905A0000905C7C
+:106080000000905E0000906000009062000090644C
+:1060900000009066000090680000906A0000906C1C
+:1060A0000000906E000090700000907200009074EC
+:1060B00000009076000090780000907A0000907CBC
+:1060C0000000907E0000908000009082000090848C
+:1060D00000009086000090880000908A0000908C5C
+:1060E0000000908E0000909000009092000090942C
+:1060F00000009096000090980000909A0000909CFC
+:106100000000909E000090A0000090A2000090A4CB
+:10611000000090A6000090A8000090AA000090AC9B
+:10612000000090AE000090B0000090B2000090B46B
+:10613000000090B6000090B8000090BA000090BC3B
+:10614000000090BE000090C0000090C2000090C40B
+:10615000000090C6000090C8000090CA000090CCDB
+:10616000000090CE000090D0000090D2000090D4AB
+:10617000000090D6000090D8000090DA000090DC7B
+:10618000000090DE000090E0000090E2000090E44B
+:10619000000090E6000090E8000090EA000090EC1B
+:1061A000000090EE000090F0000090F2000090F4EB
+:1061B000000090F6000090F8000090FA000090FCBB
+:1061C000000090FE00009100000091020000910488
+:1061D00000009106000091080000910A0000910C57
+:1061E0000000910E00009110000091120000911427
+:1061F00000009116000091180000911A0000911CF7
+:106200000000911E000091200000912200009124C6
+:1062100000009126000091280000912A0000912C96
+:106220000000912E00009130000091320000913466
+:1062300000009136000091380000913A0000913C36
+:106240000000913E00009140000091420000914406
+:1062500000009146000091480000914A0000914CD6
+:106260000000914E000091500000915200009154A6
+:1062700000009156000091580000915A0000915C76
+:106280000000915E00009160000091620000916446
+:1062900000009166000091680000916A0000916C16
+:1062A0000000916E000091700000917200009174E6
+:1062B00000009176000091780000917A0000917CB6
+:1062C0000000917E00009180000091820000918486
+:1062D00000009186000091880000918A0000918C56
+:1062E0000000918E00009190000091920000919426
+:1062F00000009196000091980000919A0000919CF6
+:106300000000919E000091A0000091A2000091A4C5
+:10631000000091A6000091A8000091AA000091AC95
+:10632000000091AE000091B0000091B2000091B465
+:10633000000091B6000091B8000091BA000091BC35
+:10634000000091BE000091C0000091C2000091C405
+:10635000000091C6000091C8000091CA000091CCD5
+:10636000000091CE000091D0000091D2000091D4A5
+:10637000000091D6000091D8000091DA000091DC75
+:10638000000091DE000091E0000091E2000091E445
+:10639000000091E6000091E8000091EA000091EC15
+:1063A000000091EE000091F0000091F2000091F4E5
+:1063B000000091F6000091F8000091FA000091FCB5
+:1063C000000091FEFFFFFFFFFFFFFFFFFFFFFFFF4A
+:1063D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:1063E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:1063F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:10640000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
+:10641000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:10642000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
+:10643000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:10644000FFFFFFFF0000000300BEBC2000000000B3
+:10645000000000050000000300BEBC20000000009A
+:10646000000000050000000300BEBC20000000008A
+:10647000000000050000000300BEBC20000000007A
+:10648000000000050000000300BEBC20000000006A
+:10649000000000050000000300BEBC20000000005A
+:1064A000000000050000000300BEBC20000000004A
+:1064B000000000050000000300BEBC20000000003A
+:1064C0000000000500002000000040C000006180C6
+:1064D000000082400000A3000000C3C00000E48070
+:1064E0000001054000012600000146C00001678050
+:1064F000000188400001A9000001C9C00001EA8034
+:1065000000020B4000022C0000024CC000026D8013
+:1065100000028E400002AF000002CFC00002F080F7
+:10652000000011400000800000010380000187008E
+:1065300000020A8000028E00000311800003950013
+:106540000004188000049C0000051F800005A300C3
+:10655000000626800006AA0000072D800007B10073
+:10656000000834800008B80000093B800009BF0023
+:10657000000A4280000AC600000B4980000BCD00D3
+:10658000000C5080000CD400000D578000005B0010
+:1065900000007FF800007FF8000000D50000150023
+:1065A0000000FF00000000000000FF0000000000ED
+:1065B0000000FF00000000000000FF0000000000DD
+:1065C0000000FF00000000000000FF0000000000CD
+:1065D0000000FF00000000000000FF0000000000BD
+:1065E000000019000000000000000000FFFFFFFF96
+:1065F0000000000003938700000000000393870061
+:1066000000007FF800007FF80000068E00003500D3
+:106610000000FF000FFFFFFF0000FF000FFFFFFF64
+:10662000000000FF0000FF000FFFFFFF0000FF0061
+:106630000FFFFFFF000000FF0000FF000FFFFFFF44
+:106640000000FF000FFFFFFF000000FF0000FF0041
+:106650000FFFFFFF0000FF000FFFFFFF000000FF24
+:106660000000FF000FFFFFFF0000FF000FFFFFFF14
+:10667000000000FF0000FF000FFFFFFF0000FF0011
+:106680000FFFFFFF000000FF0000FF000FFFFFFFF4
+:106690000000FF000FFFFFFF000000FF0000FF00F1
+:1066A0000FFFFFFF0000FF000FFFFFFF000000FFD4
+:1066B0000000FF000FFFFFFF0000FF000FFFFFFFC4
+:1066C000000000FF0000FF000FFFFFFF0000FF00C1
+:1066D0000FFFFFFF000000FF0000FF000FFFFFFFA4
+:1066E0000000FF000FFFFFFF000000FF0000FF00A1
+:1066F0000FFFFFFF0000FF000FFFFFFF000000FF84
+:106700000000FF000FFFFFFF0000FF000FFFFFFF73
+:10671000000000FF0000FF000FFFFFFF0000FF0070
+:106720000FFFFFFF000000FF0000FF000FFFFFFF53
+:106730000000FF000FFFFFFF000000FF0000FF0050
+:106740000FFFFFFF0000FF000FFFFFFF000000FF33
+:106750000000FF000FFFFFFF0000FF000FFFFFFF23
+:10676000000000FF0000FF000FFFFFFF0000FF0020
+:106770000FFFFFFF000000FF0000FF000FFFFFFF03
+:106780000000FF000FFFFFFF000000FF0000FF0000
+:106790000FFFFFFF0000FF000FFFFFFF000000FFE3
+:1067A0000000FF000FFFFFFF0000FF000FFFFFFFD3
+:1067B000000000FF0000FF000FFFFFFF0000FF00D0
+:1067C0000FFFFFFF000000FF0000FF000FFFFFFFB3
+:1067D0000000FF000FFFFFFF000000FF0000FF00B0
+:1067E0000FFFFFFF0000FF000FFFFFFF000000FF93
+:1067F0000000FF000FFFFFFF0000FF000FFFFFFF83
+:10680000000000FF0000FF000FFFFFFF0000FF007F
+:106810000FFFFFFF000000FF0000FF000FFFFFFF62
+:106820000000FF000FFFFFFF000000FF0000FF005F
+:106830000FFFFFFF0000FF000FFFFFFF000000FF42
+:106840000000FF000FFFFFFF0000FF000FFFFFFF32
+:10685000000000FF0000FF000FFFFFFF0000FF002F
+:106860000FFFFFFF000000FF0000FF000FFFFFFF12
+:106870000000FF000FFFFFFF000000FF0000FF000F
+:106880000FFFFFFF0000FF000FFFFFFF000000FFF2
+:10689000000000FF000000FF000000FF000000FFFC
+:1068A000000000FF000000FF000000FF000000FFEC
+:1068B0000000FF00000000000000FF0000000000DA
+:1068C0000000FF00000000000000FF0000000000CA
+:1068D0000000FF00000000000000FF0000000000BA
+:1068E0000000FF00000000000000FF0000000000AA
+:1068F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:10690000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:10691000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:10692000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:10693000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:10694000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:10695000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:10696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:106970000000100000002080000031000000418075
+:10698000000052000000628000007300000083805D
+:10699000000094000000A4800000B5000000C58045
+:1069A0000000D6000000E6800000F700000107802C
+:1069B0000001180000012880000139000001498011
+:1069C00000015A0000016A8000017B0000018B80F9
+:1069D00000019C000001AC800001BD000001CD80E1
+:1069E0000001DE000001EE800001FF0000000F80CA
+:1069F00000007FF800007FF800000344000035002D
+:106A000010000000000028AD00010001000902068E
+:106A1000CCCCCCC5FFFFFFFFFFFFFFFF7058103C41
+:106A20000000FF00000000000000FF000000000068
+:106A30000000FF00000000000000FF000000000058
+:106A40000000FF00000000000000FF000000000048
+:106A50000000FF00000000000000FF000000000038
+:106A60000000000000000001CCCC0201CCCCCCCC5A
+:106A7000CCCC0201CCCCCCCCCCCC0201CCCCCCCC80
+:106A8000CCCC0201CCCCCCCCCCCC0201CCCCCCCC70
+:106A9000CCCC0201CCCCCCCCCCCC0201CCCCCCCC60
+:106AA000CCCC0201CCCCCCCC00000000FFFFFFFF1F
+:106AB000000E0000011600D6002625A0002625A005
+:106AC000002625A0002625A000720000012300F367
+:106AD000002625A0002625A0002625A0002625A00A
+:106AE0000000FFFF000000000000FFFF00000000AA
+:106AF0000000FFFF000000000000FFFF000000009A
+:106B00000000FFFF000000000000FFFF0000000089
+:106B10000000FFFF000000000000FFFF0000000079
+:106B20000000FFFF000000000000FFFF0000000069
+:106B30000000FFFF000000000000FFFF0000000059
+:106B40000000FFFF000000000000FFFF0000000049
+:106B50000000FFFF000000000000FFFF0000000039
+:106B60000000FFFF000000000000FFFF0000000029
+:106B70000000FFFF000000000000FFFF0000000019
+:106B80000000FFFF000000000000FFFF0000000009
+:106B90000000FFFF000000000000FFFF00000000F9
+:106BA0000000FFFF000000000000FFFF00000000E9
+:106BB0000000FFFF000000000000FFFF00000000D9
+:106BC0000000FFFF000000000000FFFF00000000C9
+:106BD0000000FFFF000000000000FFFF00000000B9
+:106BE0000000FFFF000000000000FFFF00000000A9
+:106BF0000000FFFF000000000000FFFF0000000099
+:106C00000000FFFF000000000000FFFF0000000088
+:106C10000000FFFF000000000000FFFF0000000078
+:106C20000000FFFF000000000000FFFF0000000068
+:106C30000000FFFF000000000000FFFF0000000058
+:106C40000000FFFF000000000000FFFF0000000048
+:106C50000000FFFF000000000000FFFF0000000038
+:106C60000000FFFF000000000000FFFF0000000028
+:106C70000000FFFF000000000000FFFF0000000018
+:106C80000000FFFF000000000000FFFF0000000008
+:106C90000000FFFF000000000000FFFF00000000F8
+:106CA0000000FFFF000000000000FFFF00000000E8
+:106CB0000000FFFF000000000000FFFF00000000D8
+:106CC0000000FFFF000000000000FFFF00000000C8
+:106CD0000000FFFF000000000000FFFF00000000B8
+:106CE000FFFFFFF3318FFFFF0C30C30CC30C30C329
+:106CF000CF3CF300F3CF3CF30000CF3CCDCDCDCD66
+:106D0000FFFFFFF130EFFFFF0C30C30CC30C30C3AB
+:106D1000CF3CF300F3CF3CF30001CF3CCDCDCDCD44
+:106D2000FFFFFFF6305FFFFF0C30C30CC30C30C316
+:106D3000CF3CF300F3CF3CF30002CF3CCDCDCDCD23
+:106D4000FFFFF4061CBFFFFF0C30C305C30C30C3AC
+:106D5000CF300014F3CF3CF30004CF3CCDCDCDCDEC
+:106D6000FFFFFFF2304FFFFF0C30C30CC30C30C3EA
+:106D7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDD
+:106D8000FFFFFFFA302FFFFF0C30C30CC30C30C3E2
+:106D9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB5
+:106DA000FFFFFFF731EFFFFF0C30C30CC30C30C304
+:106DB000CF3CF300F3CF3CF30020CF3CCDCDCDCD85
+:106DC000FFFFFFF5302FFFFF0C30C30CC30C30C3A7
+:106DD000CF3CF300F3CF3CF30040CF3CCDCDCDCD45
+:106DE000FFFFFFF3318FFFFF0C30C30CC30C30C328
+:106DF000CF3CF300F3CF3CF30000CF3CCDCDCDCD65
+:106E0000FFFFFFF1310FFFFF0C30C30CC30C30C389
+:106E1000CF3CF300F3CF3CF30001CF3CCDCDCDCD43
+:106E2000FFFFFFF6305FFFFF0C30C30CC30C30C315
+:106E3000CF3CF300F3CF3CF30002CF3CCDCDCDCD22
+:106E4000FFFFF4061CBFFFFF0C30C305C30C30C3AB
+:106E5000CF300014F3CF3CF30004CF3CCDCDCDCDEB
+:106E6000FFFFFFF2304FFFFF0C30C30CC30C30C3E9
+:106E7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDC
+:106E8000FFFFFFFA302FFFFF0C30C30CC30C30C3E1
+:106E9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB4
+:106EA000FFFFFFF730EFFFFF0C30C30CC30C30C304
+:106EB000CF3CF300F3CF3CF30020CF3CCDCDCDCD84
+:106EC000FFFFFFF5304FFFFF0C30C30CC30C30C386
+:106ED000CF3CF300F3CF3CF30040CF3CCDCDCDCD44
+:106EE000FFFFFFFF30CFFFFF0C30C30CC30C30C3DC
+:106EF000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD98
+:106F0000FFFFFFFF30CFFFFF0C30C30CC30C30C3BB
+:106F1000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD76
+:106F2000FFFFFFFF30CFFFFF0C30C30CC30C30C39B
+:106F3000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD55
+:106F4000FFFFFFFF30CFFFFF0C30C30CC30C30C37B
+:106F5000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD33
+:106F6000FFFFFFFF30CFFFFF0C30C30CC30C30C35B
+:106F7000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0F
+:106F8000FFFFFFFF30CFFFFF0C30C30CC30C30C33B
+:106F9000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE7
+:106FA000FFFFFFFF30CFFFFF0C30C30CC30C30C31B
+:106FB000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB7
+:106FC000FFFFFFFF30CFFFFF0C30C30CC30C30C3FB
+:106FD000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD77
+:106FE000FFFFFFF3320FFFFF0C30C30CC30C30C3A5
+:106FF000CF3CF300F3CF3CF30000CF3CCDCDCDCD63
+:10700000FFFFFFF1310FFFFF0C30C30CC30C30C387
+:10701000CF3CF300F3CF3CF30001CF3CCDCDCDCD41
+:10702000FFFFFFF6305FFFFF0C30C30CC30C30C313
+:10703000CF3CF300F3CF3CF30002CF3CCDCDCDCD20
+:10704000FFFFF4061CBFFFFF0C30C305C30C30C3A9
+:10705000CF300014F3CF3CF30004CF3CCDCDCDCDE9
+:10706000FFFFFFF2304FFFFF0C30C30CC30C30C3E7
+:10707000CF3CF300F3CF3CF30008CF3CCDCDCDCDDA
+:10708000FFFFFF8A042FFFFF0C30C30CC30C30C37B
+:10709000CF3CC000F3CF3CF30010CF3CCDCDCDCDE5
+:1070A000FFFFFF9705CFFFFF0C30C30CC30C30C3AD
+:1070B000CF3CC000F3CF3CF30020CF3CCDCDCDCDB5
+:1070C000FFFFFFF5310FFFFF0C30C30CC30C30C3C3
+:1070D000CF3CF300F3CF3CF30040CF3CCDCDCDCD42
+:1070E000FFFFFFF3320FFFFF0C30C30CC30C30C3A4
+:1070F000CF3CF300F3CF3CF30000CF3CCDCDCDCD62
+:10710000FFFFFFF1302FFFFF0C30C30CC30C30C367
+:10711000CF3CF300F3CF3CF30001CF3CCDCDCDCD40
+:10712000FFFFFFF6305FFFFF0C30C30CC30C30C312
+:10713000CF3CF300F3CF3CF30002CF3CCDCDCDCD1F
+:10714000FFFFFF061CBFFFFF0C30C30CC30C30C396
+:10715000CF3CC014F3CF3CF30004CF3CCDCDCDCD1C
+:10716000FFFFFFF2304FFFFF0C30C30CC30C30C3E6
+:10717000CF3CF300F3CF3CF30008CF3CCDCDCDCDD9
+:10718000FFFFFFFA302FFFFF0C30C30CC30C30C3DE
+:10719000CF3CF300F3CF3CF30010CF3CCDCDCDCDB1
+:1071A000FFFFFFF731CFFFFF0C30C30CC30C30C320
+:1071B000CF3CF300F3CF3CF30020CF3CCDCDCDCD81
+:1071C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F9
+:1071D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD75
+:1071E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D9
+:1071F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD95
+:10720000FFFFFFFF30CFFFFF0C30C30CC30C30C3B8
+:10721000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD73
+:10722000FFFFFFFF30CFFFFF0C30C30CC30C30C398
+:10723000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD52
+:10724000FFFFFFFF30CFFFFF0C30C30CC30C30C378
+:10725000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD30
+:10726000FFFFFFFF30CFFFFF0C30C30CC30C30C358
+:10727000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0C
+:10728000FFFFFFFF30CFFFFF0C30C30CC30C30C338
+:10729000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE4
+:1072A000FFFFFFFF30CFFFFF0C30C30CC30C30C318
+:1072B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB4
+:1072C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F8
+:1072D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD74
+:1072E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D8
+:1072F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD94
+:10730000FFFFFFFF30CFFFFF0C30C30CC30C30C3B7
+:10731000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD72
+:10732000FFFFFFFF30CFFFFF0C30C30CC30C30C397
+:10733000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD51
+:10734000FFFFFFFF30CFFFFF0C30C30CC30C30C377
+:10735000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2F
+:10736000FFFFFFFF30CFFFFF0C30C30CC30C30C357
+:10737000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0B
+:10738000FFFFFFFF30CFFFFF0C30C30CC30C30C337
+:10739000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE3
+:1073A000FFFFFFFF30CFFFFF0C30C30CC30C30C317
+:1073B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB3
+:1073C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F7
+:1073D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD73
+:1073E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D7
+:1073F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD93
+:10740000FFFFFFFF30CFFFFF0C30C30CC30C30C3B6
+:10741000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD71
+:10742000FFFFFFFF30CFFFFF0C30C30CC30C30C396
+:10743000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD50
+:10744000FFFFFFFF30CFFFFF0C30C30CC30C30C376
+:10745000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2E
+:10746000FFFFFFFF30CFFFFF0C30C30CC30C30C356
+:10747000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0A
+:10748000FFFFFFFF30CFFFFF0C30C30CC30C30C336
+:10749000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE2
+:1074A000FFFFFFFF30CFFFFF0C30C30CC30C30C316
+:1074B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB2
+:1074C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F6
+:1074D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD72
+:1074E000000C0000000700C000028130000B815832
+:1074F0000002021000010230000F024000010330C0
+:10750000000C0000000800C000028140000B8168F0
+:10751000000202200001024000070250000202C0E7
+:10752000001000000008010000028180000B81A80B
+:107530000002026000018280000E82980008038031
+:107540000010000000010100000281100009013854
+:10755000000201C8000101E8000E01F8000002D895
+:10756000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC5B
+:1075700000002000CCCCCCCCCCCCCCCCCCCCCCCC5B
+:10758000CCCCCCCC00002000CCCCCCCCCCCCCCCC4B
+:10759000CCCCCCCCCCCCCCCC040020000000000067
+:1075A0001F8B080000000000000BFB51CFC0F00350
+:1075B0008AB7B13130ECE644F0E98159181818F86F
+:1075C00099C8D7BF1168C04E20BE01C4075948D71B
+:1075D0007F551AC15E26C9C0700A8827883330B427
+:1075E0004A21C4ED651818EE01F92BA16272403DE5
+:1075F00073A4C977F3281E3CB8D014951F620CA160
+:107600005F9840E82234F950A8BCB81E842E36C5D5
+:107610006EAE841E71F6A7A9A0F2BD55F0ABCFD512
+:1076200040E5C7A2A90F81F2017EE9B234D8030078
+:1076300000000000000000001F8B08000000000098
+:10764000000BED7D0B7455D5B5E8DA9FB3CFFF6421
+:10765000278470123EEEC400C1063C4280A0A83BC5
+:10766000FC1A7DD41E1025E5A11C446B004922A6FE
+:10767000D78C96D76CC8870450E3E751BD457BA0F3
+:10768000D88B0E5BA3A68ABDB43D887AA9C3DB2242
+:107690005AA52D7A83FA2C58A0B1572ABD4FCB5B3F
+:1076A00073AEB592BD77CEC9C74F47EF788D43769D
+:1076B000D6DEEB3BFF6BCEB95634D94FF22E27E422
+:1076C0001CFCD0A7291142A6F73DC92D5932C92368
+:1076D000E41B3E823F1FF923534816210D3EF6BCA2
+:1076E0003D10D905CF2D8D84A426C2F771491221F2
+:1076F000244848899A0B2D02B1870BE15977617CA8
+:10770000323E67C23387C8848C84F218FDBD20EBFB
+:10771000FB9C42FF399AA880F114F68AA8A43C96F3
+:10772000C2F6DF226446DF3C48DD57F578B86FDEED
+:10773000EEA7A26B24C5EB9E837F94E5598950E6A2
+:10774000FA0D47A5C79FB7D51F4FC2B9382F95A8C7
+:10775000382FDE9E108BD8E7E7EEE7A346F2F8F36A
+:10776000E3FBC32DD3B8026E6D8D3E7CB636EA24A2
+:10777000E5258436333B4BE93344CC5DA5FDDBCDB9
+:107780002312871F9F0F8C63D0FAF47F42E1DE9CA7
+:107790004B9241C0214938E0D61C5AEC33D3F42730
+:1077A0009E2497C2AD84CFB9A8FF7AFD302F0A0777
+:1077B0003FCC2B0D3C97C2BCA6F79F97BFD83DAFDF
+:1077C0006A6287CF70E7159844C821C0876A128221
+:1077D00078B9CDD19FAC9B56779AFE08A70BD5E020
+:1077E000EB1B229E822572DFF8000723E0A02F6F9B
+:1077F00034C7496F6EBA067820BE3A387CE20AE395
+:1078000007AB0F8FF4199A1D93803568F110E02DA6
+:107810009F30F8E557B7DE2A4F2194D53A0F4EA096
+:10782000F0CBEF5EB99040F9E8152780DF9ACBA640
+:1078300056CEA5F5B2CB63AF2CA04D423143027AB0
+:10784000DD0A9D15407F5FB32A68B909FAA365CBAD
+:10785000BACAB4106EA6036E1472864ACB1EF8B56F
+:10786000280DFC482F1EA473DEFEED33C1CF436C00
+:10787000F8437E5EEFA0CB8C78BF91E1CBA2FF01F5
+:10788000BE46101B5FD37EB22B35075EB25CE33C75
+:107890000ABF20BC6FFD9B8C97439EF41994CE3D8C
+:1078A000A5B29EA478CA26B16CB58CE263A14A4009
+:1078B0008EE5E4EA1290C360786926A412F89F4A24
+:1078C00007B2C826E77ECEF9AB60CDEE9DAD749CC5
+:1078D00033B34331A895AFD3B94EEDBF9E3B40BE05
+:1078E000786DE5B2E74802C7EB3C5844E76595C9B7
+:1078F000B18729DD6C2D3DACDBE5E3B15EF9E2A695
+:107900000F62A833B83CA0F0514A65D31FF9ECF4DC
+:10791000A17C4AFA08DFE8C4C770F1757A98F4F1DF
+:1079200059C71378EDCF571B055E7D847EDF52B2B9
+:1079300078407DD51FAF4F92046D172A2566324DD2
+:10794000BBFFB4EB0BF7D326DFDD72541935A36A06
+:10795000E74078CB75AE57F4EB6F508C7747D0A2E9
+:10796000AAA37CD5B81E688FDE63114A776740F6FC
+:107970005078281D17A5A04C8A49EC61D64D4AA223
+:10798000657FD44C6E413A48225EC4FCBC86EC90C4
+:10799000B36AAE530E932A4BB2CFDFDFA0E13C3483
+:1079A000182F17EC02DA2105851A2229A05B41AFB6
+:1079B000A092CE9D0F65A79DD1664C25E9F0A072DF
+:1079C000BC4B92A0D76F0D4DBEB8C75BE29CEF9049
+:1079D000DB8554E33DD1268D9CEE6BA792F7047EA8
+:1079E00028102F13761DC7D3660FD92B5D48E5C12C
+:1079F000986BC152209BE1D32C6A87C0932A9FCDFC
+:107A000063A6EA4057648FA4C23C71488A4742F596
+:107A10001DD40B4A06F623FBEA90FE9490894FF1A1
+:107A20003DF3BCD8F8BD655FA206F0531DD58C2D83
+:107A3000748E6B15D3D80874318DC9A7EAE88479A0
+:107A4000A0EF3C129BD7B7A57C5C879AD39687762C
+:107A50005906FBAE5AA52A7F2A7CDF3661207E229A
+:107A6000494F4FB70D9E6E7BF06689DA835FA2BFE8
+:107A7000CC2433018E7F8A2DCE4A0D80AFF71B0FA9
+:107A8000EAEAF83E7BD0FD7DAD42EAD2C98156C913
+:107A9000C7F8D26769601F8875AF0576A720DD1625
+:107AA000DBC4D69B9B8BF05DBBE717BA6AE3BFB51F
+:107AB00054CD78A7F65F8F80B7E8A7B77DF2A0A373
+:107AC000BDBB5D6F7F425E507B18E85CD041504A81
+:107AD0006C95E87B6F6CB105EA6CED63150CFF19D2
+:107AE000E6DF8BAF4F397FD16E30BAFAD3EEA656B0
+:107AF000D04FEF691D575D4CE9E8F74F28B14DF4C1
+:107B00006BF58E89F3C05E7A8FD3B7C0D389DD4D14
+:107B100079E9E823139E7E21F9711C415FD5F2F2C9
+:107B200001E96130FA7ACA4D5F9D577F21F475C82B
+:107B30004D5F1C1E273BD9FAC9FD23185E38BEDCF9
+:107B4000F8C988974FDBAE3F3DFD5AA27CEDEDBCF6
+:107B50003A3D3DF1F90A7C7DD6F90E4647798669B2
+:107B6000EA74FC51D48E91407F9491588ACE53A7E9
+:107B70000FD45B31A6B7845C12ED4F4BCC4E53C98A
+:107B80006BD85E21294B477BDB6967CC57E84BDA22
+:107B90004F7309497A715F64FA504F95A884E93FA1
+:107BA00033943F03EC08FEA3CC8EC1BAB3C0FE07EA
+:107BB000FD359BEB5F89DA5B747DA132E7BE37E070
+:107BC000B23F14BE5FE8676F0D737FEC97F9FE3824
+:107BD0004842A88FC4FE38037FF6EE8B395C476AB3
+:107BE000C494E9BAB5839EE42609B41B41FD4C8ECA
+:107BF0004A49E62F20256037AF970A62A00FE83E7A
+:107C0000AF278B7E7FEF070AEA878668DD8A1658E2
+:107C1000F6B50D13BBE9B8F7349269C59EBEF1EE17
+:107C2000513B7C00EFF6E2F50EBBF6BB52A250B61C
+:107C3000E91D7F549B563C0D8653DFEEA6F090293C
+:107C40002081FF02A1FBA22F18003FF6BE174EF6BF
+:107C5000B2D2BF9C0B364F011653B02F6DA7B63B67
+:107C6000B9188AA3A50A4A07ED1EFEDDFA4D05ECF8
+:107C700077DBFDACBC63D3AC8D169447F2FA561596
+:107C8000FB9ECFCAB76DFA4105EC0BDAB2E99AA9AF
+:107C9000BE6EF324ABE269F8FB365976D85F4DC669
+:107CA00082F2FF43D7E1F79917BD40E1498112B352
+:107CB0000CD26B97150ABF41C7DD952500FFD7147D
+:107CC00002F4EC3762F19B0CA43FA47B7FAE19DB7E
+:107CD000424B0DF4850CF528DE1E96605FC7EC3133
+:107CE000F0E79C43FAA57C41BFAFCFD6B13ED16D42
+:107CF000F659519F3DD68B2717DEEE557BFC80B79A
+:107D0000EF8DF9F01713693FD642390664F3BD0DC4
+:107D100045D92B6D787CCC37A70AF0489A73D12EC1
+:107D20008992DE1F13CA62DF5C403A2BC0781C4385
+:107D3000251FA1743A2EDE53012830AAF4E7708F74
+:107D40004BE6E9EFA15DA548E7BE34743BCA0D07D9
+:107D5000DAE3A845543E8D90483C9DDC5DA9E6A041
+:107D60003C185149D73B809FE09B549F30FB2CE14E
+:107D700003FF56A67132CDF333C073934CC71D4D2C
+:107D80009208A7C1E09A099EADD127B3515E7FCE7C
+:107D900070CDD4DE0DCF1112E397956A39F2CB5036
+:107DA000FD3B6D7C3FD5027E38FA6CE27E38777BF6
+:107DB000BFDA416269F0EB379CFE210DF625B67201
+:107DC000BD6C307D1072FB89189EDD7A6101D70B86
+:107DD0002D51AA17983C5C087A20C8E1DF02BB7ECF
+:107DE000909F6192B4E8F720F707915226FF7DF447
+:107DF0003FE0B751554E7DA00D511FBC2BC55F9084
+:107E0000910E8904F3BB5FEAB86202D04F3EB3C75C
+:107E1000A337B445133638D4CB4CDF097D962C16E6
+:107E2000FA8C20FCCEE37348920E3FE8C307362C51
+:107E3000CE42BFDD8D41871C8AB62EC6FDAF8D9E1A
+:107E4000D12FDAC1FDA399F0A76BC9443A7958A89C
+:107E5000307918317B52E0F34342CEE32E434ED6C5
+:107E60000CFEC4B10F8B4CED39783E5DEFCE8BE448
+:107E7000D826DA4E9DADA63C14BE6AF98B55127D0C
+:107E8000EE2C64F0B76611A4D390B1E08402FA58E6
+:107E9000ED467F4DA8D2BD2FB69515E8A7E77AD459
+:107EA000DF763FF500FBB8A13E9B28BCDEB6F13F74
+:107EB000855C4AA1EB50371003EC09D5A4223102AE
+:107EC0004F3D0FE8453563217C765754C2F3BCD94A
+:107ED000F14AD9A6075433BE05EA8FF8CA7DEDB042
+:107EE0005EF526595624C6073936789B4AA1633F6A
+:107EF00097ADBBFCA589D62AD4EF8646C617F69F58
+:107F000077BDAC72B9E7A417412703C8BBCF441FA4
+:107F10006FCAC25FEDC4BF834E8AFAF02BDA85FACE
+:107F2000F9AB9CF875973F6FBCFA014F141FE751EE
+:107F30003C017D9E379BD123B547D17E7AC0D76166
+:107F400002BC1F2836644BEA6B175672989FF92CB7
+:107F5000DD6851BBE7FE95DB4D68975F4C6580841B
+:107F6000CFB4FEA37A59C376542E542ACC6E97C050
+:107F70001E9FAF6CAB82F63B295E81DF77027F43A9
+:107F80007C20A1A11CAE97DB2B36D2BE5B8F4AB200
+:107F90000246ACBE14F1EBE7FCFE912751097EC806
+:107FA0002DFF4B26BB0CD04B03FBBD9A38BE4519A9
+:107FB000FC0D609F8CA9D3A702D833B5DB5E275791
+:107FC000A65B57B5C2F07F47DDE10E344F9F77EED9
+:107FD000473CCB4DA048D897542B36FA0E97317FAB
+:107FE0000749D0F5407D4E371F150E4CAF0FBAE64E
+:107FF0003F96C753DCF55E56B8BFCE60F03244FF03
+:108000001B07EE5FC0E76C9BC2E323D40043221E34
+:1080100049ECFA5BB9F15005BCA75CB709F0B55D56
+:1080200026D5CCDF1C473D14E1E3ED2CCFC1F60B88
+:10803000552647C79AFA16C0F7D866192C05F2B824
+:1080400062E0FB51CBEBF67B281EDA0B492C64E097
+:1080500010D8EF8BE335A4CBFC5CA6C7F2EB290963
+:10806000D07AF9A52469D0F6EDFB1FA8D068394273
+:108070003754600AFBCA193E7D252406A690C72204
+:1080800029997D4F424C5229EFB140951E183F036C
+:10809000F75F77E69298D7E8931B82AEEE6CBEC787
+:1080A0000F7AE481E27BAE9800FEC65215FDE4E44F
+:1080B000630A27E14F54205E163761BCF6596CDE27
+:1080C000F40DE253D5D9FAC7DC3F1BF9A43DFC34CB
+:1080D000CEC35A4762E3B15E8C60FC860A54F05707
+:1080E0003655337BD78D8FF524F1B832DD4EAF870F
+:1080F000906EDA3F51F8BEE0C58D60E78F835F690F
+:10810000F9974D7FDC381CBB45C40F85DDB245EDCA
+:1081100044BEB728CF815E12768CBFB813C7FDBFAF
+:108120009CDE87DABFBFC4E96F75DB356E7BA65E68
+:10813000D61DF6AB7B5D1F795257C0FCB6E4537E6B
+:108140004FA3077E03FA9AB6DF115DFCAB89465F49
+:108150003F7D72C8C0EFA23CE6AC86F8197A7D2A52
+:10816000F7608F6632BE1A2BE4D037285F0D107F80
+:10817000147CF511151287804FD40EA42F6296201F
+:108180005F097E51BA3BDACFA7F460D4CBE0B906E1
+:10819000FE2239B45C48E93D65B38784BC504B3B53
+:1081A000E313A5FE74F7A021231ECF94317F7596AB
+:1081B000D56D4293606927C6F5285DFD17D095AA55
+:1081C0002725C0EB98FB17E0BA7EA93056F7AB2CF9
+:1081D0007EEC5EC7CF397C89BE1BED793F1B8EB22A
+:1081E000F87D31363F579CBDFE5703C6D9FD319708
+:1081F0009D334C3F428ECAFD08DCEF3558FBE1C68B
+:10820000D795B323903E7ACB19E4ED4D2AE78BA3A3
+:10821000BB1C70E9070F65476CA0F9F9859FFE53F9
+:10822000C60550870D010E6E385EA23AFD879F3756
+:108230001CDDF1EF97B8DC1F4C1E044D33252BE0FD
+:108240003F23CCBF1322DCBFE3A4F79DCD32DA215C
+:10825000C1B0BC134CC9ACFA6ED4C1627C4AEF55B4
+:10826000AA8DDE47971E4A413BB73ECAA4870693B4
+:10827000B7AB7CE60D2ACAADF4FBF1BE7C03CA2580
+:1082800069F20D32E2B5EEF3C937182ABC7BFD9BCB
+:108290003C7FE0867241C7C6D2DF51B8AC3EE821D0
+:1082A000E897F998AECE16575BCDF78137F07DE4AD
+:1082B0008D241E818FA7885C09FC728A1C8E4CB3AA
+:1082C000C993FB548DF14B9BE76DF0AF8A78F94D64
+:1082D0001DAC2CE673F3FDCEF2D7C9E23CF0EB7D8A
+:1082E000FD3E0FE26BB5CBBFD6AC32FD7133A96B4F
+:1082F00005BCB5784815C8B11B74A28EA0A6EBBA10
+:10830000671E9CB19296BFCBED91F7A95C366C715C
+:10831000D035A1A406F87DA76BDAB59710689F6CDD
+:108320002D807D5A36C17DAB1BCEABDA9CF31B6C26
+:10833000FEEEF952F2C2F9669A87BA474A6B4F3F8E
+:1083400022E40DC757A6BC2A914FF50B20205ADF17
+:108350009A43D8BEF3AD60B209E535CBA71AACFDA0
+:108360002F55463F9FB6FDAB83B45FE7EB5900CC7A
+:10837000D6966BC5C12F24E28235A4CE1C4D7F5505
+:10838000F72DB246135BBDE810EB150F5C2FD3BC85
+:108390004FE83E4BBEB06FFEDF9512C7D434F3BF3B
+:1083A0005D49D440FF5EC083024F15F18D7E608A27
+:1083B000DF5A35D4266541BE5317EE03FD86EAA089
+:1083C000875AF805E45A09936BC112E777B77FF82B
+:1083D0004355C4E153C87F188236C07E08A514F007
+:1083E000DF94AB277BEBD3F16A605D1742298E7275
+:1083F000A35E67F56B8871D7EC32E43F8C3FD4B74E
+:108400009F8F71F5FA9106FA77551233B10F17DD88
+:10841000D59E9548D2A60F6BD51E0DF8AC96DA45C1
+:10842000F6F7EBA38AC34FEB7E7AA8E51C2A817D81
+:1084300092CCFC483A2DDBD6FDA70E89E7AF185940
+:108440004B06F0DFAD8F327FF00DEDE3B398DFD058
+:10845000297F4F3732BFDCBF3DF67D0DFCFCA71EE8
+:108460003D7615C07BEDBF2AC407F91B8F85490AED
+:10847000EDB1A406F6D89A2EC54CA6CDAF6862F130
+:10848000CFC7C388AF354F7A930B69FB354FBF33E6
+:1084900085D0F99DDED4F3E268B09B1F95581E820B
+:1084A000D53DE56AFA7E8D4A56A4F31B4CF630F9A9
+:1084B00073F2D96015F0B7B467FFF5D86FE7528F44
+:1084C000D7B6DF2EF678906F693D66973F2225C7B5
+:1084D0004BE9E6C7F23F4E3E22B1F9EDF524FD30FF
+:1084E000BF3D3BB5049D47ED9E0F509ECC7DFC8764
+:1084F000118043ED5EC5A1076AF72829EF147C1EA1
+:108500008327C48DA41940279C5EBAD661BCA8A657
+:1085100073EB07E0C7A8DDEB946B142EB114C0F524
+:108520000D25B610CA4FFD4BC4A0A07AFFD0C311D1
+:10853000802BED77A59605FAC649DFD0FFD99CFEC2
+:10854000FD11D283F1BADACE76365ED7577E0F7A36
+:10855000A5D6253FDF875FF2FBDB33D7785CF6CC0F
+:108560009EA1C5EBD6FEF0CC43161DF7E4937F78B1
+:10857000C8A2F3BFE5AFFFF9D0B7803F7FE6D74190
+:10858000FED73EFAEB08B1D163AD87F1E3E9B1C4A0
+:10859000A27B5472FA37DE24F84B4EFFF4F7E30C5B
+:1085A000BAEED34FFC25CFA0F5EB7F3A7F14C0A1E4
+:1085B000FEC773470DB4FF067A4D7AEDF34A225E8B
+:1085C0008DBD123382F6F1A70B3F07BA0E8C83796B
+:1085D0009E3AE28D81DBB996BE6B980AF85A87FA0B
+:1085E00018CA1B289C6B1EDBFC01C889FEF0B6462E
+:1085F000CBE8AC4F8D06A77D4DD73B0B106FA40782
+:10860000F5A8BB7EED6B149F1766C6DF19F2B106A5
+:10861000F2AEF6B176365E27C55FA43FFE4EC12F9F
+:10862000B3FAE3EF0E17FECE905BBE970F798D5D28
+:10863000231C7152F1EC8B0FC6B3E203C80B210F60
+:1086400006836FB5C4E6B5CC633EE801BE7A32D886
+:108650008BDF8580DF1F9E1947287D1CF7F45C0F98
+:1086600072B3E7A75E7D177DBFE6A76F209F9DFED3
+:10867000F12B9A81F9992424E5F13C31F67308E451
+:10868000700DDBCB91DADDE19437D287A79AE4A2B3
+:108690004A2382EF8FE1FB24A3FF9AE4FE25521ABE
+:1086A000BCBDE1296276407224C265DDEEDF69CC93
+:1086B000BEECC3A7540EF83CB600DE67C2A758BF95
+:1086C0000EEB9F69C3EB6EC6B7EEFA35943F41EFF0
+:1086D000F5C36F527A039EA7777A55D07BA7C1FE68
+:1086E0000AF5C77B1FFC99FD33DCFDCA2B6EFE1615
+:1086F000F1630E87CCF461713B60E0F50D177E3FAE
+:10870000F7180E3A12703CF9717AF97F8ACB8D1AFC
+:10871000625516D8EC139F87DA27905F46E2D6E8B9
+:10872000C2BEF99E847D04A5BF938F2A18AF69ED60
+:108730003C8072DC2D2F6A48FA7DFB5F3DCC5EAC3D
+:10874000D9BB7F0AC8B593CF3D8BF459F3D8310D0F
+:10875000F62F2FEE794AEB2EEDE307D00F499B7EE3
+:1087600038F9A3FD53983C48BFFF0D6AACFFDA7D92
+:10877000CEFE6B1FFBC0D1FF5AAB5363790C038F46
+:10878000F3BE6A2E85F5BE7FC843409EBEDFA9A416
+:10879000F5BFF670FD28E0D4FACA82DF419CBFEC39
+:1087A00070C0003DDAB5C91C7507D86B873D04E47D
+:1087B0003751CD3F7869B9EB9500C633BA0E5FAB40
+:1087C0001836FFC4332E78CE7CCD9A1BA6FDCDEC97
+:1087D0008E97C116CA2D37CA8FD27DA3DD7FF54A89
+:1087E000E52890FBCD60CF4F84F16251F07F289156
+:1087F00005952C7F50D6FD69F537EBCF138A63BE04
+:10880000A047977B7DB6488F62BFC5FD4DADA1F4F3
+:10881000FEE8059AD817D0716D7290DAAA55E9F082
+:10882000364B637648A6EF976ACCDF93E97BC52089
+:10883000ED7BF99BE3470BCBF174F39EC6FB71FB19
+:108840005733C9030FEFA74C331CEB05782FB2E564
+:10885000C58F26C98D90274A4221773C3AEEB3C78F
+:10886000A3AB0EED87F873EED5FBF201FE11D2AC8F
+:10887000BF87763C899D1BC08E75C79FDD7989991E
+:10888000E2D1BE50CD9114E9DF5FFFF8BB897928B2
+:10889000CD63E6F90A6DF1F766BD5FFC7DBD46C7A5
+:1088A0006DC9808725DA9C7FD280BE649248F77DAF
+:1088B0000BA79BCB49F7532B619E3116BF9FED82CF
+:1088C000D7A51C5E3F3B9F2E9CAA9E0A62A81E0A4B
+:1088D000DFB94BCC661081F397F7ACDD0F7C26E255
+:1088E000F7D644F95C70E8F01B6E5EC42ADFE27BC9
+:1088F000B521E445103D27AD5EE89B87C5F755518E
+:10890000DC2779389F1D78F3661FC82D95242A0B24
+:1089100061BFC4E39A986F4FFBCB4BF98949E7AB32
+:10892000E906DADB79A9D50FDC0471757D0CC62365
+:1089300094B397A0FFD0DDAF128D59980F16322A4D
+:1089400014DB38ADB92C3EA3EAF1B479C3ABB4C49F
+:1089500013B05EE5EC65D8AFEC8B613D121A5ABEE0
+:10896000EC77AE8E207C7D14BE201F1164B02E9E4D
+:108970003775F7D511D433FE839E9DF0DD1F6279E4
+:1089800054B7CB8118E459B9F3A82ADE6A27D05F1F
+:10899000EB3109E328827E5B0BEBCE03393E401EB0
+:1089A000D54B9ACDAF9E298FCA1FBA11F3A8FC9F51
+:1089B000368FCA2A9807F6586B361179559644E7D0
+:1089C000D1CAF3A2FEA3F5A5B9A09F5AFDE2FBCB45
+:1089D000734D7BD95A7F00CB3CEF6AB4B7BD09EA2F
+:1089E000E78E26759DE8CF33C93536391BF1AA08C5
+:1089F000E77FD6CC7735479E7CD4115F3AF0E666A8
+:108A00001FE86FFAAC2C02F851BA02BB3D2FD54ECD
+:108A1000ECFA483C051DB5160F1CBF53CF5E847E93
+:108A20007C51F6E949D34C537FBE8FD91F827E7D9E
+:108A3000B924097AC967241EB809E83937140B32FA
+:108A4000BAC438595B08DD53FDD6D1567C03C6DB6A
+:108A5000CEE804B95ED071FFF95FC6E75F64615C80
+:108A60002244309E96791D65B88E559A19F6DAE043
+:108A7000987B5EFABCD4BBBD6C3D2DF1E52CEFAC10
+:108A8000DA198715791AA27E504A1478411EE6B287
+:108A900038ACEC63FCD6872FAA2A6CFECD26B2DC5C
+:108AA0000212509777E2D146554F62FD127FE27C69
+:108AB000AF233ED7CDE2BAAE78E27CE516C6DF83BF
+:108AC000E04F9CCBD80A71B789109F8BF2F37D06DB
+:108AD0008FD3992CAF28033DB5150F1C87EA688CFE
+:108AE00061FBBB1ACB59BE9244B85F3BD9047402F8
+:108AF0006E0946F73F6802BE092B822F7E88E53B50
+:108B00002556BEC9FBCC5CC8373CF0E61B55AB28EC
+:108B10007DB49A01E4FFC1D6A72767205E873B4E4C
+:108B2000FFF5B271DBCC10EE77075BB79E62E30E08
+:108B3000751C115FEB5B9F0FC769350619A7838D05
+:108B400033F8FC199FDCB17F35E62FF828FFFBE9ED
+:108B50007BDFEC1E9248D37F16E79F036F7A515E4E
+:108B6000B7E5B2FC284F49C8644E4067FF9ED2BCAF
+:108B70003978DEA1EC02CC9FBF637F3BCA190DC6DA
+:108B8000A1553CB1D04AD62E61C239DBC83C82F136
+:108B9000674F49DE2A78DF403AE273400F97CB2CCB
+:108BA0003FB9A4E426E8271BF892CEA3DCC7F69DC4
+:108BB0009E928B6F86FAFBA7BF9E68023895333A68
+:108BC0002007F31D706C358AC4B99D01F9DE53EEA0
+:108BD0008C5B109F33FF93A84B306E4EE54287D7D6
+:108BE000665752BD781FF23329B3C0DEDBFEB56B8A
+:108BF00063767EFE672DFE1D565FE46B093E4F9F38
+:108C000037D79A2BF2E6123EA50CCE29F5E6532F64
+:108C1000CCB7E77FF17CEA90C8A7E6F1CC0EFA5F0B
+:108C2000BAFC39F739C6CF2B9FFA292FDF0F07C9B6
+:108C300058C8A7FE8987C4529017F36B250679316F
+:108C40006EFA70F7E73E07D06B8F64E0E7F7013804
+:108C500036B9979F70E1ED463FC6E7C478CF837C75
+:108C60002A1D9C4F47573BFB195BE73C9F755E8372
+:108C7000335E55681538EA9FDF56E4F83EBEE302DE
+:108C8000C7F789F74F759427252F76D4FFD29E39E1
+:108C90008EF2E4CE2B1DF52FDCBBD851BE28B5CC0F
+:108CA000517FDAC11B1CDFA71F5AE3F83EF3C87AD5
+:108CB000477956F7371DF51BA87902F92C7040004B
+:108CC000F7ABDB46CB76FA6CCFA67A250BF3B8353B
+:108CD0009ED48FF166968BDC9767E06EA7146BA627
+:108CE0004EF9573126CCD331CFF046E423A5386F67
+:108CF0008E81EF672C00BF132963E7B444FCDA537D
+:108D00004C527EC8EF0BB9F0EB8A4B7B946D29C0B7
+:108D1000B376F4CB07A5487FBC7AA2EE7CC6A1C58A
+:108D2000B555E3B3E507E4F9385F8CA57C817EC4D3
+:108D30008F15D8B7907961B40F6CFB1B84A3D8DF73
+:108D40005CE623CD0053C11715CB7B46BF80D5C44D
+:108D5000BEC62B0F272FB9BF5EF1A2DD25E4CC6084
+:108D60007A45494E73E421B89F54FE95F9609F1EE1
+:108D70005986F2A8775FD02B1FE333E1BB478DA163
+:108D80007CEC957F7B0A1C7261A8F6995B4EDF052F
+:108D9000421FCF05A597D711C80BA372E9CEABAF81
+:108DA000C23818A9278EF3807955711FE83D6A975C
+:108DB0007DC567DB3F47CA997DF6F766A78660BD2C
+:108DC00036F927EC5501D7118575718CEB85650255
+:108DD000FBAAA6D9B128F801DBA08A6D9FF65DDF5A
+:108DE000F958BF39A4C9E02F6D3E381FE3035E7FF9
+:108DF000DC0779CE4D9E7825ACAB295BD6D3E53B1D
+:108E00006DF631FF8CD6109CB67B00FAD034BAEFE9
+:108E10004FB3DE7FF131BF4BB3BEF820E8B99CB051
+:108E20006640FE44EBFE598B305F77A1AAC3BE9625
+:108E3000D04DDC3BB6B8222171F46769B932EA45FE
+:108E4000AD2182E30F36DF5B7DCCCFE06DF00F38D4
+:108E50005FAF96DE4F9169BE9B61BEB983CFD70BE2
+:108E6000F39560FC108EBFC9C7F0E886BF87986D88
+:108E7000F368BD96635FEE28468A61F97AF72E9C07
+:108E80008A744A05B5837EC53E82D2EFC340BF6275
+:108E9000FF2ECEB3DEE263790902AFC460FE881113
+:108EA0000915F7BD3909B6FFED931F8C8E723C3161
+:108EB00082E7BFC6A8189704378DDD8FA1F8D9BE09
+:108EC000C77B690CF1D5FE15956C027A2BA6EB8158
+:108ED00073B90759DCA9DD13AB8A87FAC613EDDF36
+:108EE000E1FB40952CC9C27B529485D174F6672F63
+:108EF0009D73B8B9E5EC011FCFC3CA27F94CCE96D4
+:108F00002E85A34499FA71DB1B0DDCAF3CFCF329E1
+:108F10001D08CFF631F7A11D2DFC63245A3688BFFA
+:108F200087C54BFBF0BCD448513CAA574C45A75FC2
+:108F30007B31C7739D2B9F97E359E057F8ED493478
+:108F400017F95AE05B017802AE94D9D181F495C249
+:108F5000F9C60DCF53FF4DE17904D600743B96AEB0
+:108F60001FF8E6C01504E3602E7E14ED04DDBBD7C8
+:108F70001FF6FFF75EBFA087CCF5ADB4FB0F11D78E
+:108F80000D737AF371BDF942F9DB6D709E44CD65C6
+:108F9000FBDD7079F3AD329CC320960EFEB5B03880
+:108FA000BF53E6BC7F2450EADC7FF85CF74D78F8CD
+:108FB000FEA3DFFD2ADCCE12E7F9DDF377E36BAE2B
+:108FC0003F7D1E261993DEEFEA8EC789F886C88397
+:108FD00015710084035DBF67961C47F95746CC9D09
+:108FE00069E4D3323FD30B5DCFF9314F225CA5A1A9
+:108FF0003FB6A02C5501E5823A12033D71F1F143D1
+:1090000024413BBD20C0E47E41595202BF47C149C3
+:109010009617B89DC72B0BEA93D24ADB38969FE987
+:10902000AD8FDEBC1DE5E37363595EFA6D15CC7E32
+:109030003B14BDA1A302C62D67F9E461BA5F84BCED
+:10904000B1F0116F12EDADB26E027E54AA05AC30D4
+:10905000FD7EBC914CBD713CE47DF9F079B251C705
+:10906000E781B1DAFECB69BDF5850103FA6D290A06
+:10907000B0F3BD611FEEF7FF9CFD75F4AB9E6E8CE7
+:1090800062FDB66F9B685734EF3F817EC3A0392DD8
+:10909000C6FCA8A642CA613E874CF0731035662C08
+:1090A00086EF077E83F5142DF11B0BEC93651AEE0A
+:1090B000EF010E104F68F2B37CB9CDFEBA68363CB2
+:1090C0000BC98A4569E0BD82EB1D4A518A96D79744
+:1090D00087A495A7942CF02797914EC873F7B424D2
+:1090E0002B404F93D5BA01E38CF1252BC07F3CA6D2
+:1090F0005A8F810F5D2B67E745043E3C7E127F222D
+:1091000004F552D2AD74DC89011DC7293892C4BC64
+:10911000E58FDE9C99D6FEBFFD68057EDFD65879C7
+:10912000789E8D9F4319E2951B8BE73CE0A7E3BD3A
+:10913000EA67FC9AA95FF11C6ABFAF723A39F0E6A0
+:10914000C451605F3664C8A356748AA7114C3E812F
+:109150003F62FD78635476C8DE0F8387F2DCB30C80
+:10916000AFA58C3E9B7E3C310BFA7DFECDA53AF837
+:10917000FBFE945B8CFB86534F7B4DB05F4EE590BE
+:109180006ACCB77C7AE68BB03FFC43E3C11CD526A2
+:10919000174FFDE895191EDADFA9275F99A1227301
+:1091A000251D76ECBA73AFCE003BC19A434AEAE87C
+:1091B000B356D708F45BEB63EB107972DBF3B4566C
+:1091C000785E19CCC6F679A3E43BA1ACF85E1DF736
+:1091D000EE345C378B2BF0380E5D5F5308E95AA7ED
+:1091E0001B1088175ADE7110CF7AD38BF4F75121F8
+:1091F0002929BC10FC820AB6EB594D92904FA1A5CB
+:10920000EA803D89FFE52401BE09BEA6EF475AE387
+:10921000F7C1DDE9E7F90F3C8F70E39BB74F04F826
+:1092200008B9AECE2518CFE8F99A2F09F6E83DAA7D
+:10923000F19DE560075EA7E23C6819CF1BB9F1B369
+:109240003C58E488E3E5F0F884C06B263AD9DA4864
+:1092500062C514DE3F6BF4C560FC7D8D3A967FD20B
+:1092600018C5F2DE46039F4F3796E0B3AB3186DF79
+:10927000F73496E353E4F5E1D65E417B3A5E017A3A
+:10928000E81AE687D30DD9847C852C95F8E0BE26B4
+:10929000FDE8BF55C17E1BE44A560EF2BD04ED73D6
+:1092A000799EDFC8FC39ED15469F7C15F2B4C943A1
+:1092B000249047D62CE66708437FB47DEE1242DE49
+:1092C000B6C9F573F49FB74BF8FAE87CB24CE77770
+:1092D00077FD884A1790D3BF1D958B58EEEB373D2D
+:1092E000FC86FB047FF9DB36FADE3E9DAE9AD2D1D6
+:1092F0007689C9B13BF9F73BA6CFC8BA01CAB366B4
+:1093000064815CDF3E8B183A85E35D866C79B2FA46
+:10931000EAEF683C98376F3CD74120A7EAF59D5BA0
+:109320006CFB9831165911B7D1CB5D756AE52EB437
+:109330003312F98B2763BE31F76BEF9E678EC17EC8
+:10934000B13C21F0E23C8BEB159033979D657AA8F8
+:1093500057FF7CCCDE0BBDA771FC6F9BBD4989001C
+:109360009F803C057959962073E83C4397B2F8F703
+:10937000AC775304F2FBB4187D0FF6A8C6F24D0A81
+:10938000A24909CA3FF2C7670620EF3DE7FED42E87
+:109390008AEF0FBBBC06C41BBB9EFB0BE6672853C2
+:1093A000341FF077C1BE6398B7A4C8DD1AEC789774
+:1093B0000526CF57C19E8589607C802A6A8A6725E9
+:1093C0008FAF8F3CD5322F04E7BE1227ECF5B707DD
+:1093D00012B7B21D33317D51CA0F7ED1FE82168085
+:1093E000C7560F2B2F0B4C6AB1B04CEB67B37233DF
+:1093F0006DBF35BB332A6743D2D4C4968397425995
+:10940000D49FD862CD26E41AAE0F48285108FCDE5E
+:109410005BD669396C2BABAC4C7CEC29D6BBEEC06F
+:109420005F5E1C4DE150B34FEAC410DFBE9D12AC2D
+:10943000BB60EF4E94AF054982FBFE82A49484A3E7
+:109440009D7B1A0FEACDC2B926F04245C3A428BBC2
+:109450005F484B7A62B0BD9CC4EF0F1174F17490F9
+:10946000E9C74949DADE1E9776DD273289DF57835F
+:10947000200579B98D9D0776D37929EFAF81585BA7
+:10948000E03C2E79CCA3637C9CFBD94F0ABB89FBC3
+:10949000736EE10E3CCF262B7001C8BF952AFA816E
+:1094A000D7162637521B8AAC7DB630462D56D2E2EF
+:1094B00067F4B236BB336F2AC5674BB6B3DCC4F36F
+:1094C000E7A3D956369CD7ADD97BF738C8EFA92189
+:1094D0001DD77F13E6FB328B879FD83F2BEB125AA9
+:1094E0005EF7328B63ACEB7A4503FABE27C0F38E8E
+:1094F000BA2EBA12D657B34D267221E34B73229D72
+:10950000AED971019CAC7B7EEB5BF3FD630979A462
+:10951000C8D4E58B08E90E9E68F151FC3FA2E9939F
+:10952000803EBA833D2D405F6B67C99C9E7A5E305A
+:10953000559EFF5800E35CDE027196DDCB2AAF0436
+:10954000732B4F66FC4B0912E3DA4A76B30FECF942
+:109550003FB6C8683F838B7403857BB14A0EAAF47B
+:10956000B95DA3F8043E6B55511ED2F76D1EC44B76
+:1095700007DE3342DAD83D2DE3F77957829D5D5CF3
+:1095800067AE467B5B2F453FC038D2FB837912E73D
+:1095900011267F27EAA442A5F566050B117FC55564
+:1095A000D7AE85764A784900F83D4F495AD8FF77BB
+:1095B000991CDE2E273B7D2097234588DFED114641
+:1095C00017D63DA54817BBE53917805DD422ADDC21
+:1095D000F20BC06B76119E7B85F7EB61FD1C9F4DF6
+:1095E0007ACC07F8DBCDF1A9EC942DC8D714EFB7EE
+:1095F0004A37AC06B89ED8523FDF47E19AE735DBE1
+:1096000046503C1CDF52DF129D857828F2D1EFC70F
+:1096100003F52D3E8A97DD1BCD02DD569EF8099598
+:10962000EA48B4F52DE66CF09FDCB7069410FDFE19
+:1096300002F83F1EC9117CCFBE1717F5CA1113ECF3
+:10964000D226AB4FAEF8A85E28B6D59F47E5C20F2D
+:109650001E5210AFFF4EC7033941D76101DDF74CF1
+:1096600052D12E08D0B904683930B908F36DE9BA7F
+:109670004900EC86C92AEA7911C7D126C96837435F
+:109680007DA087407E11E6CF51791D87733E4A94B5
+:10969000C5751465874979980479FEBEA42FC2FB6D
+:1096A00048FC25B6BC0290BFAE3C04C5551EEFED8C
+:1096B000CE97A97ECD3DBA481A47F1F25E80EF8B76
+:1096C00072E93E96BE7F3FC0FC40B7C7AD2F43BE98
+:1096D0000C31BAF3593C2A3E159EA3AE2B1E359091
+:1096E000FFA5FF7E3586F6CBBD63D4B4F960FF1AC3
+:1096F00064FE41EFD862BC57A38150FE07BE08F15B
+:10970000FBF2B8FCF0707BC17D4E40C8134F365B56
+:10971000637DFBDC5139A1BE73704AC8F4813CD82B
+:10972000AF4FCD027B743C9753CDA9595F05BB4524
+:10973000E5F260879F9DCBEDC9269DBB08D8BF3160
+:1097400062CF4B10F2605BA30F9F0F5F3601E39770
+:109750000F5F963707E215072E7E1FF7BF6776303B
+:10976000FE3D73E805B84B899CB1A8B6311859A1E4
+:109770005F3E752FDE17F27D357E17E6CB43BE0EBA
+:109780009DD25DD9CE3CCC47395CCE0578DE808752
+:109790007D17F778A867BF847EE06D7C3DBEC43C32
+:1097A000DC57821B0FCE1DFB4907DEC724E0E0BE5D
+:1097B000BF433D3B85F9EB036C5F2AF297DC794AA6
+:1097C000623EFB8219EE3376E143F835041E44FB1A
+:1097D0007AC91CA50F4037B5671592B4E585F49D8D
+:1097E000DBD0F0FD6938EF9205F7AF243A2E29045B
+:1097F0003E48A29DE80F353BEE712551B5C77EBEB0
+:1098000024E83AEFE2E617B83F18F4B4660C7CAEF1
+:10981000E57DBACD1579B998A7AE9207C0AE3D15D2
+:109820007C6B06F8E36AA998005739512D3C4F7AB2
+:109830009AEF4BD47DB7E2791E313FE18F13E59A61
+:10984000BD8BD04F57BB3B84E7796A924C0EAEF389
+:109850005907BDB23DEFD64C41BEAD672FEB6F3C13
+:10986000E080D2C7877A753EAC3FD870FE4C38672F
+:109870009227D79D370EE0A3323CC07EF9C9109ED7
+:10988000D355BDB6FB53DFE2FBE365DC1E09124B8B
+:1098900006782A8158376167164D95DA474AAFDC5A
+:1098A0009BDC02FCB0DD656F6D0FB0726B70724BAC
+:1098B0007329EA67948BCB023F437BA8C52FCACF9D
+:1098C000A29CDCAEB1FB3AACA7BD06E83DDA1ECFE8
+:1098D000A75BCB4A507F2845A400E0360F1C2D2003
+:1098E000FF9EF6EE023FC38FFC896B0236B89D0ADD
+:1098F0001F1907FBCA34FD598EFEC60DAF3F3A7ED5
+:1099000017E0417C9F17B91FFBA7EDD0DF41C61CB4
+:109910007A8BDABA24EF692F9E33DCE171DADBE26D
+:10992000F920E7CB36D7BD1DBE44B3099B73C19F59
+:10993000EE7B9605BFAA672739F2A4C607593C5BA0
+:10994000554D7055D2EFA5EC7B80D1411BCFC7C9D7
+:109950003C4E4E86719C71BBFEE3CCE07282F07D82
+:10996000ACAAF7DECB3940FEAB3BBEE8966FBD4FED
+:109970002EDFF2393DC7A5C4B3415A5E93EC5C10AB
+:1099800060FC3905F87335A7D3923D773F076AFD30
+:10999000319FF967D837ACF2991704A70F9F7FBAA8
+:1099A00083623DFDE417B3CBAA999D5BDF3EED4A90
+:1099B00028D7DF51A45B69E245E2597D36E8905F24
+:1099C000F7707F51B56AA11CAB3E1BC1EF9FDF78DA
+:1099D0007EC779B6FEE385F0BB18EF16977C3E7024
+:1099E000F14BDBCB291DD73FE191BDB671EA9FE07A
+:1099F000E780FC545E3BF9DD047E570B496F9E22E5
+:109A0000C887BB3451565AC12E7AC42E1FCAC16EA4
+:109A1000EB6B0FF716DE15E0F5AD60FAFA4157FD76
+:109A200022D17F2ED677CF47C81F28839DA67EE2FE
+:109A300015F343F975B7ECEA2F478C3F06FB13F695
+:109A4000FAB703E35F843B25EECA4E568C66FE1DD3
+:109A500003EC80EFABB180FD3EAC6F737AAD3E7B23
+:109A6000BE03DF7D709FE078FFFBC6A8235FFFE6A3
+:109A7000443D9ED3F87680D16535B5E8B1DD8ED111
+:109A80008E3CFD7FCCE3D3CEE3920CF3B8EC6F3C7D
+:109A90008F42077FF6CDA3D8F1FED3CE631FF70B1D
+:109AA0003FC79FF375762FC07C4342BFF57C5AD7E2
+:109AB0004F69FDCBF4E9A3CFF92AB14278CF6D927B
+:109AC000DD6346CBE00FF8EA27B7BD7B39DE0B6DCF
+:109AD000623E8E57E4E3F0731E9BC70C7C5F91FBE4
+:109AE000EF3BB8BF0733DCD3DA1862FBEEBB2FBC09
+:109AF0008A60FE7A28817182FDF90BA260A77FE758
+:109B0000C21A7C36E7CF88823C6A0A7FDD916F4EAD
+:109B1000F70869CFC1FE91F74BCE7E59B69F47D962
+:109B20000CE751D2D41771B1CDBE3ACC03FFA2D607
+:109B3000FBE017B4DE4BC38CDE36FB1218176C8DBE
+:109B40007E31F37F26C4C6B9FBC2CB089BEF6529E3
+:109B500016F7D10CFB7960F1DC1F9E118575366517
+:109B60002F88023D3767CF70AC47C9B09E5561065C
+:109B7000A7CDFA17BB9EC39F793D0BD2E6C1AAB908
+:109B8000E9EF176B17788A2690CEBEA8759DFA1B51
+:109B9000AF6B14C7577588F90D361B8C8F824AFC42
+:109BA0005785D2E07C38D8DF1D21C5863C943CBC6B
+:109BB000DF727865E2DF659EE44898D79146B67F0C
+:109BC0007E9DDF27F5DBEAA630FAB55DE36C1EB3B8
+:109BD0002B3C909FE37F563BCFA70F26375A422C52
+:109BE0005EF3B584B3DDD2AA60DAFB4D28FCEE2A21
+:109BF0002CEC83673FFC7FCE70CB448FC3855B6BBF
+:109C00007478701B8C0FAAE1929BE983C34DD05BE3
+:109C1000A67EFE7FA1B307870E2FA4AFBF15BCFEA3
+:109C20005EE9EB1980D710F8F21FF03AC7F5E6D0DD
+:109C3000E025E4D81E8DDDBBE8EEE74498DDAF34C7
+:109C400051AA3B7C05C417BEA2A0BFF7F08E79EBEA
+:109C5000886CAFC7F4D9E1CAB9EB30DF351EC47BDD
+:109C60003C5F9363FF5E067187C5AC5DBF7972F898
+:109C7000BC14CEE67E4B6324F8115E8B5F3DE0FAA8
+:109C800048A56D5D989769BB8F4AE90FDFC3C4B8DB
+:109C9000A30CFC4D0BD3CF43E033D3B8C3C5E76B64
+:109CA000F1EF0F0B9F83ADF7D970D190E485D837D2
+:109CB000E492DEBF977101C0738FCCF2398EC2ABD4
+:109CC0007CB89F8C60A5A555A376029ECA223CEF66
+:109CD0004933D6819FCC7BF5C2AD618AB7D7AEC977
+:109CE00096BC367879230CCF3396A7B70B73233CF9
+:109CF0002FB7B7BD44E03E44773D85D7BB6639BB3F
+:109D0000978AA8E6D8C5B67375535CDFDDEDC74604
+:109D100022F8FD351E6F777FCFE2ED972E19B83D03
+:109D2000A963F7B950BA1B9BEE7E41C11F9DE14468
+:109D300034429FAF4B8907BF01743429C4E21E2A05
+:109D4000298478BDE8275725298DC2FD5D8F3116FE
+:109D5000FCB469FA291CA89F4C7015EB11E3002B89
+:109D6000C2BD2C74FF88FBC5329390D9B04FF4C6A6
+:109D70006E65870D191DE4F0FC999975C1E446B034
+:109D8000F354BA4EDB7CBBFE6BEEFF80EF5D876564
+:109D90007D53617F380C261F1670BAC955129BFC83
+:109DA000E01F5B21A5BDDFECF208FB3B251F847B98
+:109DB000E3EA38CE84FB121EB8E7E05A9EDF44483F
+:109DC00062ACFDEF8C7DC0E58ABB5DAEC2E2D1E442
+:109DD0000DC6CF7B76AD199B8E7F5EE57CFA41B8D0
+:109DE000C4919FB4247EAB07F873C9C2451E2304F7
+:109DF000DF99BCBC86CF638F96187B51A80F4E1994
+:109E0000E510874FD7914413DCEFB0A241C238521E
+:109E1000E90646772B36EC97D7D1E74ECE7F8B00FD
+:109E200007B6FE6EE578DDB32B300EE6BFA7D74F41
+:109E3000473BA6F3B8FE7E827EAFD591AB3683DF7B
+:109E4000AB5B22FCEF32FCA412F20DBA799E480BF8
+:109E5000FDBE11E63B6F24F2F7840D1FD4837CEE28
+:109E6000D2089E97FB8F762FFE7D0B412FBD72622D
+:109E7000C3478D907477AF969A0C7433B2A9EE1BDA
+:109E8000E9FCE416E7FB0F43F1AC7476AE780A798F
+:109E90002EEA2D560D4FBAFA57573AE59898F7081B
+:109EA0006FEA54BAFB1A7AE93039B0DEFB3597E332
+:109EB00002EFBDF83E927E5FB423C2E2777B9273DD
+:109EC000D6A2DEB2BC06C843311F01AF5C8BC1E92C
+:109ED000DA258A43DEAE5818749D476270FDAAD712
+:109EE0007808D671EFAE9726E3DF5174E987809248
+:109EF000D0E0FBCD24E50139715C31F0F97AA3F3B0
+:109F00005EE6D749E28EE9A03F1B94B47CF50CA72E
+:109F10009FD7AB565D83F36F567498FFB1E523AEC0
+:109F20002A07F952E5C17B828F35DF16BEC9B67E9E
+:109F3000A1EFDCF3FA6DF5AA01F5D6D22A27DEF6F9
+:109F400068CC2EB0AE647CB89ACA9BD9485FDD77E6
+:109F5000CCA4E31F4EE65CB4855527F0F71CAFE6B2
+:109F6000BF1F971377CEA4F2E684CCFC61D63F31B5
+:109F7000B9B1E4BE780BC4794F344CFB6937ADF707
+:109F8000325FDF5B0D03EB47373D4DB8CF793FE5DF
+:109F90008C234483F689FAF4FAE0FAEC2093AF6A52
+:109FA0006C1CC897EB36A4AFB709922B69BD137F21
+:109FB00055AAD3E56D7EA2333E59114FDFFE133D06
+:109FC000CCBE835E4A03E7BD59412EE7F47120A75A
+:109FD0005764986F575604EBBDD372FB7510EF3B77
+:109FE0002E3BE5F30FB278FC3C8BC9E713BB9679A7
+:109FF00046029E5A251DE8E1EDECD824A0B795CD88
+:10A00000C7D08FF02D5EFFBA50FC43D04F4B8E2C43
+:10A010009E3F92E2A56B3989494666F9FF31E79F79
+:10A020005C85DD6340F5DFBBA0FF68D377D1FE50D0
+:10A03000CD715F9BCCAE6C84BCC213B2B506F3503D
+:10A04000760558DE11894DB7DF2F13E0F338B17B69
+:10A0500078F8BE261E1CD08E3F4C3A6A70DCDD417B
+:10A060001DE28F872B95D4E57492EFED0EE23DAFA4
+:10A070006EBEC834FE70EDC013BB8767070EB6EE28
+:10A080005856E190ECC03395F7DE59067CA4754C28
+:10A0900049277F859C7E8DFBADDCF4239EB3393E42
+:10A0A0008E27079ED7CDF73BE7735D9D733E825F9A
+:10A0B0008E279B02901F4E479F6CB74BC9BCE9830C
+:10A0C000E859E6FFCD34CF389FA790134079104F61
+:10A0D0005BCDE5CD5B0DF746EC7870AFFF84CCF738
+:10A0E000070FB1BCADF1F19573461A7DF4795D1699
+:10A0F00093439F375D0A3DE3EEE7EF9D0E859E1B80
+:10A100008C0E855C70B7FF00E2FC23E1EFE3E81AF8
+:10A11000C4653E8818AC4CF40570448694F373CB48
+:10A12000C41807E76E4EEC0AE0FDF6D6166F12FE75
+:10A130006EC7F15D974CB2AF6707C7FF8A25D97824
+:10A140005DCA713976C528CC2F50F0BEAED78FE4EA
+:10A150002C80F2BD876490D0E4BAFA950AACEF8106
+:10A160002C9677BE62C32B680F0E97CE57D439F565
+:10A17000FF277C1DBD7696DA5306F493090EED5940
+:10A180003EB6CF892F9A0FF279D50609E5ED962CC8
+:10A1900003DFAF524D94DBA499E947E2A3F0A02A74
+:10A1A000E4182C02E0F1BFF9DF2953E39AFD7CD2D9
+:10A1B0004DDB6E9F0FF6A19B5F46EB8C8EE15E3010
+:10A1C000785E174A3C9935B24F3EBF2DD5ED1F45FD
+:10A1D000AB5C9EC5ED6DCEA7623D9767B1F5513B77
+:10A1E000ED87F8F799F8FA48CC456F7247CD4F00E4
+:10A1F000FE737C681704BC54EE43DEDCF7033ACBF5
+:10A200009B637C25EC1D77FB6BD584C36E3C94551A
+:10A21000E8C8C771DB21FFD017E9EBFFF96FAC2F5E
+:10A2200064FDD3E98BFF0778BAC08E008000000080
+:10A230001F8B080000000000000BDD3D0B7854D59B
+:10A2400099E7CE9DB9994966924932933738930080
+:10A250000625780321449E370991A0A803040C1A0F
+:10A260007044D4282144C54ABFD2CD0D893120DAAB
+:10A27000505DB4D67587885DB6D235586AD1D2762E
+:10A28000B0828FEA365A45DA8D1A1FA5800FA2AD2B
+:10A29000ABDB8FAD7BFEFF9C93B9F76626046DFBAD
+:10A2A000F12D7C7ED733E7FDBFFFFFFCE7B0A22591
+:10A2B00085449D04FF7C49FF3B9C1A20C44FC8F194
+:10A2C000BFCA8DBD6E428E45DA93AF81AF4D5D90B2
+:10A2D000ED2344EF94C9A3B4DD3B473EAD81F2BD0D
+:10A2E0007D36AF44CB2BD65F238769BB4C28F9A1C1
+:10A2F000DF9234287F097FE60EFFDEF0804CA2C596
+:10A30000B179AF867518CAC77A923502F3CDF14498
+:10A31000C60709D9AB109D9411F2F6E6ECC8265A8F
+:10A32000AE7112DD3D8590B9696CBDBE8D9FB77A67
+:10A3300027D3F5F4FCBA8414D2F5DD7DFB8AF0A4B2
+:10A3400038F37B6D844CA3130402369245C86D7CB0
+:10A35000EFAB528906E3133ADFA386F145BFC3ADE5
+:10A360008444CFA5F5E368BFF2583FEBF8CBAEBC11
+:10A37000702CECFBF09533C75E3329D62F111C9659
+:10A3800049E17F5E0AF3B6C92AC075D73D498D3DC4
+:10A3900071E0A673B85AE7873F76BA8F25FCFF971E
+:10A3A0006EACBCC34341B22965CEEC709CF90F93EF
+:10A3B000F0DDD3E87CFA46369F759EC57C9EC3F5DA
+:10A3C000D72E05F87FA6CB5E99C263A0414EAD8023
+:10A3D0007EF50E753C1D7F40BFD5739D619DBF4FBF
+:10A3E000009FDF375EEB898B07FEBDA2DE4C076F57
+:10A3F00093C197A7C33C3BE3AFEF16581FC5DF31AE
+:10A40000257CCF85747DC72F96559DAEE7B88DF618
+:10A41000037A7990F60B0CEF773DEFF7F6C691E9EA
+:10A420007249AD793D4B8F249BE9D2461A7BE3EC10
+:10A4300067685D6748F72B2CFCB74B191CE3A5FD3B
+:10A44000DFDE71EACDDB613F3B9211DED67132D3A4
+:10A4500065C6A7C02700AF2D499C4FBA9B9FA6FD9C
+:10A46000DEBE344FDD4486F30721DD97CDA0F5FD38
+:10A470003DB6D22DB46A574F4A6324CE7A27A7330C
+:10A480003AF0C97AF279B43D7983E103C80DF866F0
+:10A4900029A7376FCF0F5B882DD6EF0DA0832442FD
+:10A4A0007EDBEAC4EF36AF13C7A95BB84809D079A1
+:10A4B000AEB3130DE0877FE8B8DEF30A766CA153E4
+:10A4C000BD6E63657D15E53F69F87A1EE674B92BAC
+:10A4D000B27844F8D637C82678D62D34C3D74A9FE9
+:10A4E0004723B6DA78FB17F49C68BE2B1D113FE0BA
+:10A4F000E908DFEF61BEDFDF37B67BA0BD759E5D8B
+:10A50000919E11F9E0AA46335D9C6E9F6F7A830895
+:10A510008FE56173BF2BEACDFB5D4A5A66134A2A69
+:10A52000CB88EA806F1D6929799A82F2E8034B7023
+:10A530003DAF13520B729E9CBAB56451496CFC1727
+:10A54000393D7F5677EBA5202EDF505A4ABC71D695
+:10A55000F33A8793C0F7EB09E019E572F70DC033C2
+:10A56000D0EB32392E9EFF8BCFFB46C3C87CB4ACF8
+:10A570006E643C9FF07A113E6F34B427C33E8F89DE
+:10A58000791F64F3825E33E2E3C457D45B56FE1D49
+:10A5900020FA4D48C791642FE8111F9087418F74AE
+:10A5A000A4DB981C2F1E598F88EF6F855CB5B4AF64
+:10A5B000B36B0E233ECABD01849B28D72D34AFF365
+:10A5C000BD54060FCA7163431E83DCE0FA55E8BB35
+:10A5D0007B7F70FE5BA03FC7A7333CD4853E7100F4
+:10A5E0003CA87CBDC303FB7AD5E605F95A7E4473CB
+:10A5F00018E137278DB53FBE7364F8CD4963EB3C56
+:10A600009D9CB5EEF7ED6FDF3905C67DFBDB9F3B0B
+:10A610008CE32FFB229F443363E5ABEB252D1287A0
+:10A62000CF36789551C17D83058E577F3116C7F798
+:10A63000C9A4A537CEBEECE94E6CBF3454E9F05343
+:10A64000785EBB5152253A84239DC9DD6B85BCB32E
+:10A6500007C62EA270F7B7B7DC168A33CE6C0EEFA2
+:10A660003FBB4369F1F84C7C853E17ED96D9C38E0C
+:10A6700078EDAD7A7580F3B9B55DE80CE971C80E77
+:10A68000B2B41FED3AE6A6313ACC4C8A7E04F28889
+:10A690004C32DB61A79DD7D2DE3AEF651CEE89E62E
+:10A6A0001776AD757C9DC33F1CA2F413B7DE83F50E
+:10A6B000AF12A65FF5480AEAC3633BAFBD07CCB74C
+:10A6C000EB17DC7608D4E4CBA9416CD7107AA50649
+:10A6D000D9EDD4BD9301EF9FD5DE7B4F195DDA71C3
+:10A6E00025DCEEA11D8E6F92D06EB1CEF32AD72756
+:10A6F000AF813C3D17C623CC5E9D4747CBA56097F5
+:10A70000B5352054C8B79202463BD5B7E1F356326F
+:10A7100019EC87D0260FFD7DC2C64FD6835E262456
+:10A7200082FDDF75A83722BC09B373FB7BDC3BB627
+:10A73000D076AF825C80F1893A3654629013762FDE
+:10A7400096478B9FDF26C0CF99CA29B1CF44F350DB
+:10A75000C8E3FA1657B9BBA434B07702D7C17E0656
+:10A7600017B8BC3D14858B15ED1280CFABAFD86CFC
+:10A770006D411C16ED15611F072F0BDE755E19C8A4
+:10A780001F87E6A24B5904CECB85948EAADC3A8C67
+:10A7900057F6DB858F017EEEAD4F0AC830DE9CC0D8
+:10A7A0009B322D2FBE3829007E47795FE1011F1DA6
+:10A7B0007FE942C94B68FF790BC6FB07E8FE5236BA
+:10A7C000D071F26079C76AABC711F243986C066129
+:10A7D0000BA6B0582CF1B2EEDB3C8FB63FCFBFD703
+:10A7E000E6A6A09EF85DDF66271DF78EB6508E3771
+:10A7F0009DDA13E91F743967139295A5F5CD5509B4
+:10A8000071677C540BE5BD0F8AF13EEED20A08F960
+:10A81000992D1C9468FDD48CA405760A2F5F91981D
+:10A820003F6FB3368BEEE7E21B1F5D4FC75FFEDD68
+:10A83000490BECB0EE06317FE90258DFD259A25C39
+:10A84000EE82B22F85F787F55650F955185BBF3D5C
+:10A8500087CE9F21DACF58308FF63D5CD9526DA755
+:10A86000F3FFE8BBDAE649130999BEB0D2ABD1F2E7
+:10A870001319F50B52287EF6124AA7B4FC64C6954C
+:10A880000B60FD3ED9C6C7BF6A33ACBFBC413F0FAA
+:10A89000EA257DE5E65ABAEFB5CE814340AEEB3608
+:10A8A000E8CE2CFA3F2912E363A7A345CBA7B073E8
+:10A8B000ECAB8CE6E372BA19BD16444B408F0D9594
+:10A8C0008B69B9C450CE61E5BD9BC8D5F1E4ED6D8F
+:10A8D000994CEEED4D8E5FAF64307B80C20DF54933
+:10A8E000DA11A2ED8EA3573E4A77E37C079389EEF7
+:10A8F000CC88F1DBE594872B285F12275BA71867CC
+:10A9000098FEC8607287E89767803C5D0843D0ADC9
+:10A9100017A912FABBA42525321E688744ED4B40C7
+:10A920007FC8365CAF5F96AE5E44C7CB4A26E13D3A
+:10A93000F4EBCF2458A6FDB53DEED8782F71BAAF11
+:10A94000290AED84F16AB2734BDB83B171E8BA3B3B
+:10A950009C534CEBB6576440FDE2D29B2719E0397B
+:10A9600089ED83D201F6A3D33C3697F2C1DEBEF364
+:10A970000AC17EFFA945EE96F72D7610DAEECA4C95
+:10A980002E5F02ACBFBF9AC99FC19B53223DC09F9F
+:10A990004EB53464B03B031C1ED5772EBC1FDA3590
+:10A9A000F53948126DB77E4F653619412F367D3126
+:10A9B0009344A61ACAF6A80272A7E98B39F87BF568
+:10A9C0009D2F29C0A7304E80EE6BBD4BCB56016E3C
+:10A9D000EDF1F14F1D725C47D317E9449F6AFC9D6E
+:10A9E000C12936BE0FEB4FB7AFD8783289648E34A9
+:10A9F0009E82F54370B773B82BF1D7395FD02985A4
+:10AA0000B7CD405F4B39BD51E9877194FECB26F538
+:10AA100080BC8FCDBB09C7DF6BA778043BB02F3953
+:10AA2000007671B99DC9CFF2BE0CAF2EC5E843D0F8
+:10AA300085C0EBDE8C964ADCEF22C9DB131CBEAE70
+:10AA4000CBC4BAB83ECD6E08CBD718D627F8818EC6
+:10AA5000BF978F5F5681FCF32F4CFF50BE5901FC0E
+:10AA60000B760BEC438D962CF60C5FFFCFA8EC8099
+:10AA70002FC52383FFA5EE08E80101B7E1F0CF3F22
+:10AA80000D3EC7627D79DF330AECB32901DF8632E0
+:10AA900053B15FF691682AF8B5BF4C677A6D6FEFD6
+:10AAA00054D74CE08B853602220CF60DF66AB9902D
+:10AAB000B764D70B5576FAFB5099CADB00E06148C2
+:10AAC000FE469DCE58FBAACC5D0B3A689D2F89E2CD
+:10AAD0007F12DAA14E62F027BE9DC1E4584598C4AA
+:10AAE000B55B966532BB45C0FB7B1BAAC97B747FF7
+:10AAF000CFA533BEAC18D025C08BE06BAB9C7A8859
+:10AB0000E3F17BFCFB8F9753D269E4D4222EA7D8C4
+:10AB1000EF07A9990FEDB2B2A22512D589AB5E98C5
+:10AB20003A1EFC995B72E4C0FB94AF9648EA981F0A
+:10AB3000D171EB9C018C93093AA923CE801BE04E86
+:10AB40008DA62F41EF2F746119FE805DF269B7C4A5
+:10AB5000E89004D2EA4A12CB21B18E5B72149C6F4A
+:10AB6000D5E6F16961E3FAB89EB83C29FA2352347C
+:10AB70009CCF4599AE7FAD4D36D4BB993EFBD0A35B
+:10AB8000FD3483E2E15589D4E37A2CF6D26F78DC88
+:10AB9000C66A2FD5733BD20FE625F2B10D9DD3ECDB
+:10ABA000AEA408615D74F053B37B09E7D7A8ADC9C3
+:10ABB0004007BFCE286076ED15B4F202CA94CE6A83
+:10ABC000ED7D831C7B1ED6837A213A0DF8F4A50C0B
+:10ABD00062B2F31AE4508104766B76920A7286E2CE
+:10ABE00009E170D045EC2E3AEF73F40B78AB916F1E
+:10ABF0003EE0F0011D486A3B427F07F75B4914F4D1
+:10AC0000CDE57353D06E25A76E1D07F10A7F0AA309
+:10AC10005B3A8E938FE3443AE172EF376327F68015
+:10AC20007E12F253E0819C92713C517F505A54E065
+:10AC3000A5E583FE734BDB25B3FD03F650CC7E5AAE
+:10AC4000BF793EB597A6D7F6466D5E902AB72FB866
+:10AC50009DB6AFA1F6938BEEE78F194C0F1E0CEA51
+:10AC6000722A8C379EEE83FE7428393CA9C51DC319
+:10AC700007B571C280BF2C857EDD8C3FE0DB99C9B2
+:10AC80009091E163DF06FECD4A65ED87E93D5EAF59
+:10AC9000490CDE5B2A999CB0B6B3F171D73AF5DA6C
+:10ACA000AC42A37D1522408776C2EC2C19748F1F0D
+:10ACB000F519C2ABFACE8634D09B9FF52D4D239368
+:10ACC0006272D4E1FCEDD8F7A91C899225DF017EE0
+:10ACD000555E9709D8CB7738185D2AE9616F06FD74
+:10ACE00066A6C4F79B27F2F564825F4DDBDDC3FDEA
+:10ACF0001EC717E7A3BF9D9FC9E245A9397528D78D
+:10AD00000196018AF73432A87B0D784CABB099FCE0
+:10AD100007C71793B1FF99DB0FA509EC873293FDA5
+:10AD200020E6B5DA116FB6E6E0FA45FF1539AFD582
+:10AD30001043FB9564E00E186FE5FA7C53BC289134
+:10AD4000FD3137531AB217F4B8EB524CBFBF49FD6F
+:10AD500045DD38FF31367F6CDE14CA70B179E54CC1
+:10AD60004DCB44BF6F96F7E8F9F4E3A2BFCBA877C9
+:10AD700050FE53FDA4ED70A35EAA05B92DFC24E09E
+:10AD80007F6F1AF077656DA6DFA027793FAB3C3A5D
+:10AD9000C0FDEA035CDFA41D117663724092627A03
+:10ADA00067B8DEE276B1453E9ECECEA674AB1BED13
+:10ADB000806178CEFCAAF6655102FA98F00FB12FA7
+:10ADC000CB6785E512909FB512194F3FD3E799F5F0
+:10ADD000BD9EC9FC109D329CD16F59DC606ED701BD
+:10ADE000EDFCF04D1995DF62D447920C728F8DD730
+:10ADF000CCE92178E2552540E57094DB43BB7CDA51
+:10AE00005D40171DC9A993414F74248F8D405C622A
+:10AE1000C7FF5617EFA0EB1F7CD9A1F6C0B0FB18F7
+:10AE20009D542E5FDF6EA7BF3B7A256F1289ADD38D
+:10AE3000BD41D256533EBE9FCB89261FDB4F932F79
+:10AE4000AA8CA3F3E735B17514F41E90EC0679577C
+:10AE5000D0C8DAEDC87498F4CFA350A6E33C22FC26
+:10AE6000111269AB2983F69A1DCE41F27A258C0F17
+:10AE7000E7B55040507AC853D9F86E35225D3B296A
+:10AE8000B6DF2EDBA249A027BAB25254D013277DD9
+:10AE9000E1C760BF4DFDD128806B7A7F9F1DEC3DDF
+:10AEA000975FDB0DBF8B7D06646F1EC8D9947EB69D
+:10AEB000BE6E0BDD1372175F570F93BF32799E0082
+:10AEC0005E4086D0F9B23615A39E12EDB332B8DEDD
+:10AED000C822E127D0CE225D04F146701F599B267F
+:10AEE000A0BD2FF01AB3AB264E01BBAA686BD4BE2F
+:10AEF0008AF67BFAA1F8F1FA17399FD07D1C34EE5F
+:10AF000023117F08BD26DA3912F8D582EE536AE3A1
+:10AF1000DBAB5413607DE572DF95B0EFA60E8524A0
+:10AF20004931F8BBFCA12320B7F27A7748001B2BEC
+:10AF30009D7564FC50CAA7FBBCF546E29549E275D5
+:10AF4000376D90B5D5467EEE5018DD28E6F33DE12D
+:10AF5000677CC2E305B3FDA163008FE67DDB14C00F
+:10AF6000F38D3BDF51463AD7192DDCA446E6BF34BA
+:10AF7000D53B23B0DFCAE576C4E39A0E2502F2A9D9
+:10AF800069F79EA80DECEC8D4405FE6FEADD732891
+:10AF90008FC227BF499B260762E3E5374524584FF8
+:10AFA0001625C63EF4FFA20AE86D2B7D839D0CF6A4
+:10AFB000CA2117E3FF0F2BDDBA44E1F8A123DC041B
+:10AFC000ED3ECC4D51F5600CEECFED99FFBC4459F0
+:10AFD000DCF3445214BE5DB69E1C276DD7759EA24D
+:10AFE000023DB9FC618F8FC229C31EDA0BFDD37DF0
+:10AFF0001EB58DF60D249129A8AF470987E916BA29
+:10B0000098BE91F1CB5C5FAAB003A7805C3AD7E70A
+:10B01000117614CAAB430EB68F0EC2D6DB99A915B2
+:10B02000C07A883703E7CD6B8A4AE00758E78DD1AD
+:10B03000955688ED47BDCE5E05E4FC1A2E6F2A9723
+:10B04000EF94DE33D041A98F9DCFE6EDDE21817FE5
+:10B0500048EBDB6A7CD89E2481BCD9CDCE29D6D0E2
+:10B06000FAEB0CF245EC238E9CA980F5B9FBFB9E14
+:10B070006572268AF427D66BC5E73C1FB3EF2EA274
+:10B080006602FEAEE8C5013ADEA1C2641C4FF0BD07
+:10B09000954FE7F9189DE7D5EF94209EE04B61F6B8
+:10B0A000A4589F68B7CB5755EB4338F4211CD6D62C
+:10B0B000DB116F623D354A681CF865CBF878CF5CD0
+:10B0C000F1963240CBF7FDF415A4C7B5DD9286FEAC
+:10B0D00042F72BCA5288DBE9FF2E439CF61266A288
+:10B0E00090ED3F7905F5CA257B59FC60EDDE3DF614
+:10B0F0006BDD313A0D9E786625D0D9DADE24E292F6
+:10B10000007F01E4532B9D523983744F7405CFB9EE
+:10B11000A89CD451AE927010FC1421873B397F1348
+:10B1200037FBFD46BE6E316E4C7EBA90DE8327A69D
+:10B130003CE3A4F05CAB4AAA0BF891C39B8E1F457D
+:10B14000394C4821F86B627C2BFCFE99DBED71F0E9
+:10B150007C1BE0D9AA4F849E0D3E5C45E02BF06736
+:10B16000E7701FD2EF3E05D7DBE1B3333D5FC9E2A5
+:10B17000DA1D0EA6473ADA9C11E0EBE7D22F7A5E91
+:10B18000A2F2D293A144E17BD0B6AA09EA0FE6B1BC
+:10B190007574D93615B7303D76870FF1974A987C8C
+:10B1A00062F2E8BE1F3379D2A4BBD17F6C0AD7AD5F
+:10B1B000C673099F4B857309127E5659EA89D1835C
+:10B1C00015BF81270E28015A7F492FE38318DC9889
+:10B1D000BE12744BE51CE2BD33539C5F868300575F
+:10B1E000EAD7B741FC41F8F5A90D21DD1318CEAF20
+:10B1F00099DCAF9FC6FD7A4785F36FEAD7AFD9F0E8
+:10B200006BF4836ECA7901BF825FA8FF68E2AB2747
+:10B2100038BEEFF731BDFA948FD1D59AB25EE4878C
+:10B2200035EFB7201FB96B993C71F79BE52021776B
+:10B2300073FB602B8E5393D27B910C7EF2BF4ADE60
+:10B24000769278DD37482DFF097932640FCFDF38E9
+:10B2500045ADFC720A571787016FF76B1FF3B73EB6
+:10B26000DC4511017C696F5146B2874F372E89BE8C
+:10B270002601BED770587FB8BBFAC23F409C7157B9
+:10B280001AE6B37CB07BC937FF40FB7FB873AE0AC8
+:10B290007ADAD71E42FA19F4BB54882752F1592B97
+:10B2A000517A68EBFD55EA4C382F7BEC8229203728
+:10B2B000DFE57C79E2C7F20680CFA67F7B7C0ED4E7
+:10B2C000AF894899603F7EB8EB5FFF0A7AB171E7BA
+:10B2D0003ACC4B6B7FEC976897DB223BD8EFBBD225
+:10B2E000D0CE3CFEC8B63900F7F6DE76AC3FF1C8EA
+:10B2F0000E2C3FF36F8FFFE22F60778452556877F3
+:10B30000E2C7DBFEE92F40E775A92AECA3296C67A9
+:10B31000E7B982BEAD726BCF01E453412F9780DE57
+:10B320000538D533F923E8F95D7EDEB4AADADD0508
+:10B33000F2ECDD2D9EC6787146C5CFF002B11894AF
+:10B3400063F512C6D9BA28D540BCA32B9954C0378F
+:10B35000655254C9A7F35CD1B0670EDA3DFA3BD70A
+:10B3600043FB25FB5C640BC6E520A84BFD0124755F
+:10B37000424AA8183C4AFD663AFACE2F29DD1EA69D
+:10B38000F201F58EC51F58D2F5C2FF801CAD730EB9
+:10B390001C0051287EEFE2F11BDA1EF54EF9FAF897
+:10B3A00071D254BF9BD32DD39B797B171504504E7C
+:10B3B00024A9E30DF6E998232D5B203D29AFB1EFD9
+:10B3C00022D8C7C5C5D74C45BA80F81FE81FDD8D08
+:10B3D000E3AF85F825E5BF73FC3C2EE225BE19746A
+:10B3E000FE1A3BF1B9E14BC86B0E94238FE2B8D43F
+:10B3F000FE40BB2AF0CB2B1E057B64BB239C3B0D80
+:10B40000C6E9E27A6B275B37EDEF8573543A9E7796
+:10B41000C6141CA7CF9181FD75D67FFECE3629B606
+:10B420005E4AA963416FC178656ED0337A3DE227E9
+:10B43000A0E0BE4E40935CDCF7E4152531FEB5C6B6
+:10B440007D409EC1F9F06C7F65857F5AEC2BE2410F
+:10B4500056786EE4F53FF36BF825BB324D7A2591B3
+:10B46000BDF2CC151F33FDFBB37750DE34031DC393
+:10B47000FCE1F74DFAF75A41C74FBD83747CED3EAE
+:10B48000A67F9BF7952A40B71FB46AE43D6A8036D1
+:10B49000F3F3D7EDD2C0F598EFF294CB0B71BD8FDB
+:10B4A000B9BE59B3F59DA3706E5AB82F17FDFC8F26
+:10B4B0009F72D5C338076D3684E7C19EF377B44BCE
+:10B4C000C67532BF80DAC148AACDD44E6576F0EA9F
+:10B4D0006DE0A7AD6D242AF07FB3857E9AF7BD821B
+:10B4E000F422ECE0E0C38B5733FBD3A5BAC08F9BAB
+:10B4F000C7EC5142ED51689F3E2FD2A6207D959614
+:10B50000037D3D73C52F3A418F37CF235E187FFBF4
+:10B5100018EDA97CDC8F4420CF65BBA3BBCA4EFBD2
+:10B520006FAF0978292429DC76A2DD4B8A15AEE7B6
+:10B5300056A3BDDC9C73958A7C6695074FB5A1DD4B
+:10B54000D51C48C6F55CB24FBA85D9236EC2D62F3A
+:10B55000217D5E12991981F8D9471C7E028E1F3B0E
+:10B56000FA56023C3EFE0925445A7FC93C46AFE9E3
+:10B57000F37A518E3CF7D47CD4E3822E3D4F26A142
+:10B580003ECFB07B2515F5DA9224235EBB1D4C2FF0
+:10B59000A5733D53B495E1B793F353A7DFC6BF8AB4
+:10B5A00039FEE2D52783DEFD88E31FC508C8772E64
+:10B5B0004FD6AE8E223F35ED66E3F992B4D25B0DE5
+:10B5C000F4EBAB667A519C07C0F9C0A238F2E231C5
+:10B5D000BE8EE0C3ABB681BD7C31C53BA894BC62D6
+:10B5E0002E47295D00DCF21A43480717FB6E5021F5
+:10B5F0003FD59F49D05F1C6C5348BCB8CFE35C8EED
+:10B60000FA3343651087F6677BD0CEF1CB953617BA
+:10B61000F42B95D49E009E7BA29D37E8CF557B4CA2
+:10B62000FC1E2AB3D176C7B23C0CCF91DFD8179756
+:10B63000001F06D8B816BB6FB8DFCDECC685DDFAA3
+:10B6400064F043C4B9868043A42DB9DE283F7FC28D
+:10B65000E11099C8E2A9D4BE77635CDB4BE701FF38
+:10B66000BE67E623CCBF6FC7760FFB997D5443F7C7
+:10B6700007769BBF28B49EE9538F1A0F1EB3FDC2F5
+:10B680002E5F590A7E65739D5B057EBBEF67D22AEC
+:10B69000A467081682DF1D5E8D7820140FC00F246A
+:10B6A000CCFCD2E69650243EBD2F42FE6B06FE93A4
+:10B6B00090DE310E4FE93DC2E89DE93FE1FF837C1A
+:10B6C00034E61D0A3920E44BB3323001E858F04328
+:10B6D000F39C810900B7D1CA938F1D94FF817F2805
+:10B6E0001C807F04BF789E667CB2A52D5009F55B57
+:10B6F0006A88B7DDA08FACFE12AC13FC4E21D74F89
+:10B70000FA42C7FD1007B0453B21BF42C8E1E6A79A
+:10B71000374F8897FF26E4B0D3CEE49B339212696B
+:10B7200037D0179CF979A6E017F3795236C48F8F7A
+:10B730009CF2BB791C7F74F91259A0CB41DEF4A4B2
+:10B74000605EBB881759C7FDD82F99E232C26F815E
+:10B750007307689F93C5F827258BF3679688CF46B4
+:10B760004CF41FB085DF813CA344FA4BF4FB5BC56E
+:10B77000AFC43C428F5AF12FCE4D603F8B26256ED1
+:10B78000D77D80C9272B3D4EE47C72147C0FDAEE06
+:10B790003FF839D770FCB2714878A2292FAECBB6EA
+:10B7A000A7315E1C4C9C779087268E2AEFEE402BAB
+:10B7B000CBAFFA0F9E674B564F34E559B9D5401BB6
+:10B7C000C451AB9CC15219E765712CCF1CF209E83A
+:10B7D000E1C9FBBA8B217FC91F329F9764D7279B92
+:10B7E000CE2372C319A6727E639EA9FD989642531A
+:10B7F000FD391BCE33D507F529A67251D70C53FB63
+:10B80000F1DD55A6F2B90F5C6C6A3F31B2D854DE57
+:10B81000D2D65B0F78397FD795A67E5576AFBD948B
+:10B82000C2B5A47795397FCC02CFB4BFCA71E9B055
+:10B83000292B8878ADB29BF3882FD8678607A4CBD5
+:10B84000019C27133EDE9C635346CA6F9D4CEC7FE0
+:10B850001E10FD83C3E9813807D4501C3F53D0B973
+:10B86000285BCFB584FC3853FA4BB44E417F89EA4C
+:10B8700013C1ED3B9CFF055C1C4370A95747828BAD
+:10B88000E3747021142E9EAF0E17EB789B529A3101
+:10B890004FF8352818ECE38156F37D98657A1AD372
+:10B8A00043A125A7B1A3591C389CC4CE2BADF5FFED
+:10B8B000C9E1F2218509E261947CFD16C7437F222C
+:10B8C000BEDEF0C9C16C90DFB504FD666F4BDB27AF
+:10B8D000A0B7AEB64709D0FF7D7C3FDB79BEE80359
+:10B8E000AD5E1CE7417E1EF9506B007F7FB8B51836
+:10B8F000BF9156157FEF69ADC0EF4E6ACFC1F70714
+:10B90000ADB5F8DDD51AC2763F6CADC7EFEED630D7
+:10B910005BD7307C9172B473429971E3A5D7E8F29A
+:10B92000A8F044E482B8FA32E13872C388F9E51B22
+:10B93000FAA5C79F35F0EF5B591EDF51C86D9C4ECD
+:10B94000A6C3F9E6E9FA7FDE4A1E7F76FCE8F948ED
+:10B95000D013399539211E5F87795EE563DB57DDAA
+:10B96000A54F4A0CAF189DC587539DF3E33C70D695
+:10B970002783CD60E82FEE9F88725D382DAEDD9075
+:10B9800097CDF46E7D123B8F5F6EE1EF6F6533FAFA
+:10B99000FD5636D377BF4B2067D2793D5DA703CFE5
+:10B9A0000787F1DD3DB3E3C1F7AEEC80292FC57AFF
+:10B9B0006FC53ACEEF1CDD63D4387C76BA71C4FE15
+:10B9C000ACFDAEE2FBFF663661EBFF7FC69FBFBBFF
+:10B9D000CE83FE03C0CD6FD8FFEFAE4BA98F179774
+:10B9E00069CF66E7A1D43A27C10C34F575056CC55B
+:10B9F000621260E7BEE3BC101F12790189E9D58E9F
+:10BA0000712484A13C1CAE141F01A5888E6F1F9A5F
+:10BA1000276A8779545B4CCF42AE0D31DCFF9087AB
+:10BA2000D303EDAF2B98D7339007EB3B537A22F239
+:10BA300043E3473AA71BD6FF0CE5CC9AECBFAF9C7B
+:10BA4000117C4E4EDD3B3E9E9EAC87B967507BEC31
+:10BA5000FE87989C39CDB8670ABF7A7900CFAF4787
+:10BA60000DBF7DBE51C5A53E77A54E26D4AFDBE008
+:10BA700064DFDB93537BE0FBB96B6C84A4527E8163
+:10BA80007552BED5AB08BBBFF596F09B5AA683BCDA
+:10BA9000DD9E1B7A309B8EB34A61FEE29FB2B4EF0B
+:10BAA0004339999F0B27F37361255BE98432D18A6F
+:10BAB000715F17F07D75DA0263615FEF4BEA44F066
+:10BAC0005BBCB6880ADF54122D61F9799130F86BAE
+:10BAD00099E72707C0DF4D9E40481FC6C75517C4CA
+:10BAE000D19494C117C701FFFFD286F7A21FF7B206
+:10BAF000753EFE403E9EB350818FF26232FC4EB7DF
+:10BB0000B205EC72DAFFFB52F8896CBAAFE35EA7BC
+:10BB10006EA3EB9ABCF9BD8C0CFAFBE3FBABF05CBB
+:10BB200021BA4BD615B8DFD0F7E1772FA1E35DD06E
+:10BB3000E7C0F8F3054446F9BEC64EB6021F25829B
+:10BB4000EF07DF889F07E6C8914CF95DD6FAF7B991
+:10BB50001EF82041BEF16BBC5EE4CF3844FE8C5F22
+:10BB60001B317FC661C99F71D84304CE851D43F93F
+:10BB7000330D04F367E838C6FC990FAAE2AFA39F20
+:10BB8000CB73C7172909C64DC5DF3F281C799F8E87
+:10BB90002F5CA67CEC587F37FE9E287FE73301A7F9
+:10BBA00004F94B9F0CAD2F97E899C67E8CEF62F39A
+:10BBB0001460BDC3920714AB67F93F1DE98C4E0EAC
+:10BBC000E4787DD7D0A1AF2103789FF36AB7CF0186
+:10BBD000F1A41051F7E0FD1EBB637040F06121B489
+:10BBE000B3BF0B76B78D4A5EB0BBAFDEE07877C0EF
+:10BBF00020B71669E63281F60639BC1862D8741F80
+:10BC0000C9E71563FEDFA72490E61D418E3638E5AF
+:10BC100090DDB08FFE0476C4859C0EFB73E3C3AF4A
+:10BC200030C766CA631ADE9FE703F07B68B77A47BE
+:10BC3000969F00DF70A6717C2B1E7C587F3A38FBE4
+:10BC4000E1B00DE26A9512CBF3FF9BC33B9DE7BBCE
+:10BC5000B1FB030E4BBEFAE25CEBBA59BEFAFDE94A
+:10BC6000A19939D82F30C1785F60AF5D4B9942BF41
+:10BC7000FD5CEE58E1B289C3D9BAEFBD3CEF3E5945
+:10BC8000262D7B0CF0B7EEF71B398CCE45FB0E074B
+:10BC90003BCF02C1E7A4726F0561726F454E21CFA1
+:10BCA0001F4FB703BE1AD8106485F7109E2F0938AE
+:10BCB0000F831F87BB158E21125809F9DDA783E773
+:10BCC000865C6D450E9DF79A57921590FF2B9D83CC
+:10BCD00007C1671DE8B31D1E47BFEFB8C71DDD498B
+:10BCE000E03CAEF8C967E837B542657915641EDAFD
+:10BCF0003F929E2F7F79FEE8ED9FCED47031F0C742
+:10BD0000FB3C3F5BE8A5CEBC131320CFFEBD8CCA25
+:10BD100029B97E8CC36B9940473F4F6274F4001D74
+:10BD20008996D7FD6222DE87BF2A37AC423B91E776
+:10BD300047B4C109909770A670A27F1C4047A783A3
+:10BD4000D39A1CC2F831353E9DF4E4B0F8DFE9F82F
+:10BD500003EFA195FDFDF843C0539C6388F5A9B995
+:10BD60008C0EC557C0CD9A4FA4E6DA783B96AF78D3
+:10BD7000556E08E17C72CC27475D74EDFD4AFCF7F7
+:10BD80001D9E1CE5FE05BCFF5E72B83F39FEFA5EE3
+:10BD90004CC0C7FFA8F54DCDE5F43339FEFADE1EE1
+:10BDA00025FC4264F0ADF4BF831EA3789E0A78267A
+:10BDB0001D83281FFB33E2AFF3AFA35E67D8F1F713
+:10BDC000D0B782BE897E4D239EDFE724C73DBF5F8B
+:10BDD00046FD29F087ACE7F8E2BC9ECA0FDC6F9DF8
+:10BDE00073706526E07D1EDF771689A6C3F9E62FFE
+:10BDF00092F03C60989EE4FC41E195920BFA64E17C
+:10BE000020C635FA27C4970B29B98CEE86DA77B1AC
+:10BE10007912DD43C8CC9546750F819485311E5843
+:10BE2000E97447658A875B383E94FC9B54B00F2BBE
+:10BE3000735E3A02FBA4F0FF70089E86FCBE13AD51
+:10BE4000CF7BC73912CBED35F213E52D71F63321D7
+:10BE50002B3C21D7106F5CB3EB05EF3803BE4AC80B
+:10BE6000808DDDA31EB499FCE46C72467EF27E17D1
+:10BE7000E397F73242A80F403F80DEE97CFAC252D6
+:10BE80004026D81990DF33E8494639DA9E37A3387F
+:10BE90006080676DAEB02FE50476E3D7BB1F10B3AB
+:10BEA0009B2493FD1A1BDF8EBF0BFC54BA5F8C8B57
+:10BEB0008F0959DAA500CFBF646897C1D70A3FFD43
+:10BEC000CE59E978FF00E0373736DE10FE13E0F98F
+:10BED0001B595A3DC04DCD0CB0BC0191D73714BF92
+:10BEE000B07B8F3A63F01E2D5E92797C8DDA0DABBC
+:10BEF00061BD4A12E747E2C67BE4C26E2116FB86AB
+:10BF000014337F7745CE4BFF03F19FCE54C6B29DCD
+:10BF1000FFE4423FF06AC9ABC0BEA9FDF1E6F76994
+:10BF2000FB3089BEF92DF40F859D91227F9932FA5D
+:10BF3000750AFFF97479D6CF803D46D7536573E310
+:10BF400079E733747FB9546E5429EC5B399F5215ED
+:10BF50001DAF4A2ED83F40D7F51939953C9B7EBF7F
+:10BF600043181CD6BFF2870CF047ABEC8E1346B9D2
+:10BF7000658D7FDC956B8E7F7C4616FEE67C80CBE4
+:10BF8000AC0C84CBE4A7E6651BE32F43F10FBE8F17
+:10BF900025FA354C9E5AE49C906736277B6F84685F
+:10BFA00024E0CDC2381283BB2EE1FB57B345199C68
+:10BFB000145A9EC59124417FBAEFD9FC4B56857324
+:10BFC00040CE405A0FCC47BDBF1CF8B65FA806E074
+:10BFD0003B570AD9D93A222C0F91B414407B9B735A
+:10BFE0004086F945BC02579205E3887959D9C3CBFD
+:10BFF0001D759FAEBC2E303CAE41DC1EB47F15BE1D
+:10C00000BEE35EB76E33C43B92DCD1E398BFCABFD8
+:10C01000D6B8C7EDB2AE43FE7632E94579E9767F10
+:10C02000A40330BCC42B41F9FB52F8E7C017479575
+:10C030006E12A4BF9FFCF9E704DF65831B6245F025
+:10C0400035EB27BF7B3DE645FB43768B5E0A4BC055
+:10C0500047D9F5D6DFCDFACA49FAF1FE90140DE5BD
+:10C060007C9979FA784EA2388EA38AA17EF0466632
+:10C070000F1F4E66FD0F27B37E6F71BDD49CA110BC
+:10C08000CC8BC9723AC19EFFD8730CAE6C823EE96C
+:10C09000027DE274688857A157D6EEBD9900DE9AFA
+:10C0A000F72D4238FC5E62E7A4FA0A09F319C4BB13
+:10C0B0000FF593C8CBB4279991C7FC94A5CF8757A8
+:10C0C00034D172DD4BA4244ADB95CE0DD5C0FB2EB6
+:10C0D000ED2544DD44CBEDAEF08F7E02FB7885BDCF
+:10C0E00037B68EDFABA59858B39B8EBFE3CA31EA53
+:10C0F00016D852F56027E40B0D6E265EC82F194640
+:10C10000BFA7283F507A7804CA74DDEB5687FFE555
+:10C1100036DA3EF725A2621B5E0F3E0AE04FE2745C
+:10C1200001BFCFA5BFAFE37454B45F62E7FC3EF636
+:10C130000E180E0EEF7439D9FFAEDB5F79F934BA01
+:10C14000AEA2BEA948DEE3687BC883824C04D69EBB
+:10C15000D8E2B51F07ED0370AECFF043F2147C3F79
+:10C160008970F937DDC2873363FC80F5A5BCBC8ECE
+:10C17000EB2913DFC038D46FD7CAD9B13FF6F331FA
+:10C18000FE5089F8C3F8790689FD8171AB63F3A08D
+:10C190005C9EC7EB0E2E5F80F9DFD3EDD103C0EFBD
+:10C1A00033F9B7947F81DF9D148E57D85B0EFAE97F
+:10C1B0007ED23710B50D666908B4C37865242403B0
+:10C1C0009CCBBD9BDB617D1736BC9209F475735E19
+:10C1D00011D2DF2CA75AE4A224D25EA1AADE2278D3
+:10C1E0006F4C42B82CAD774620CF6DE9D07B3FE154
+:10C1F000E032CA3F5784257E0F3F1C6C30C46D452A
+:10C20000FEDFB224EA5FC791DF37E731FD2EFAAFD8
+:10C21000E3F75344FDDA3C37CBCFCCBB68461E9ED8
+:10C22000C7B0BC68CAFFB3F3A6C5E40A9D17F356AE
+:10C230009610CD01FB5AC2F957F0FF52ED56B46784
+:10C240009786CC76E9EF25866F7DB98476E215F581
+:10C2500023DBAD0BF3C4B9708117F500117A8AD1D5
+:10C260009590E78B41BF831CAEA5FADC603737DCC5
+:10C270007E2A1DFB65FF60ED97E7C4EEC3ACB3DC1F
+:10C280008769E6F761D6ED6B736401BDF3FB30EBB4
+:10C29000F6BFD369CC0314701A7E1F6610F31F9784
+:10C2A000299103704F68D94D748FB4FDAFF8FD89A3
+:10C2B00067E1FEC494181D79AE7445597E9D867958
+:10C2C0007E05DE1415F252BA6C5330AFA82BD5A3FD
+:10C2D0001AF378B6B4B5D4403B914F24EEBF2C4B43
+:10C2E000706EFCCD3C663F6F97585E97BEDC89F060
+:10C2F000F6CBE488F19EBFBF2884F97433F202388C
+:10C30000CF761E5F80FCD3A9F41BA1661AC317EB7E
+:10C310006F950F74BC0E18AFBA48C53C9AEA3496B4
+:10C320008FE6CF0C95DE3229366EDD7E96BF57172D
+:10C33000FAE410CBC35D5406F04C24D7ADFA8BD28F
+:10C34000DF3D408FC3F556B819E8CF51155A7E1D11
+:10C350001DF7E4CB0AE6DB918D9AE4A0ED7EFC822A
+:10C3600057857B781D95A14535586FC77B8259F558
+:10C37000249A44EBCB5E527A20CFAF91742B304E8F
+:10C38000A3458FDDE47E56013EBD69A72346970491
+:10C39000F213D52210784DBB87C545500E09F964BC
+:10C3A000A56732CE2C874A85DCA5F281E5F73530CA
+:10C3B000BD477E20417CE8A4E798CCFD6B947BD3FD
+:10C3C00084B0B2C8FB69FB9F437B46C0730E9517D0
+:10C3D000E0C749F0FB64EC87652A4F8B21EF742698
+:10C3E00049467A1B6647F0F5950DAD9FD94D424EF3
+:10C3F00056561002EF2358F143E7433A17E77D7092
+:10C40000B402E70833F9FC9FDBB449D120E08B4448
+:10C410006C14CE9D520BEA1D27E481D2EF16298CB5
+:10C4200072F1A7BA2E035C2F242D4B160611EF2FA5
+:10C4300001DE6739FB52000F4715D509F5359030FD
+:10C44000885F33BEE6BBEFB303BCE6E758F1A2DB7F
+:10C4500001BE0B02C3F085F70BB404F8D2845C2153
+:10C4600066B91224A7D8FDE6CD876E03FFF874F6EF
+:10C47000C9F7B2C247E3D1AFB05312E5E59DE4F28C
+:10C4800078B47979271DCCAF984106AEDF2D0DA782
+:10C49000938F0F6E90730CF424E8F4699EA72FFD20
+:10C4A00092E7FD967950FFC5F425A383725E9A0149
+:10C4B000F465A083D9FB5C5199EEB394F79F01F426
+:10C4C0003025A62FA33677402904BCAB5DB23CDCF7
+:10C4D0004ECECA0820FEA7DA34C4FF34EA8171BB0D
+:10C4E000D39D4FF75FE1EC6DB70710FFDF07FFA6A5
+:10C4F000920410FF9516BD53EDAEB3039D543BADB2
+:10C5000078D610FF35DE61BFDBBE0AFECF01FC0B23
+:10C51000BD320AFB94E27F42FE08E78D89F07F413D
+:10C52000BEFB8CF23205FEAD781772608FCB5BEDEF
+:10C5300086787023CB4B9EFAF2B8762867AD0DE271
+:10C540007D993DE9EAAFB0BE85D597F56932BCCF9C
+:10C5500058B49ED6D3F29E60A81ACAEB3648284734
+:10C56000A7BD166E87F2B88DACBE7453CBAFE09DFD
+:10C57000B3753AEBFFF4F14E7CAF22D2C9FB57768C
+:10C580005743795D17EBFF478F5307BFBCFC48A4A7
+:10C590001D7E9FB895AD43D87D7339BDED919EF852
+:10C5A00015F6EB66FD6E38E44C66FE12B3E3E6F07A
+:10C5B0007DCE7D88EDD3F7DEC5B5010AF7EB0675B4
+:10C5C00007CA0D5B5339CAD1047E5AA5D45D00DF7A
+:10C5D000F9544E10C43BA5D34296B7DA43A75893FB
+:10C5E000CFEC2691EF0979E78B0CF85A93CFFC0832
+:10C5F000D12E2B83B0FCE407D9BBB3221F357A3F81
+:10C6000091207E007B44FD9B203F757E510BEAD339
+:10C61000F9E788BCD401FB2A3A6FE9977FBA289ED4
+:10C620005F7E4B3EB3938EF13C7AF17B63246803CB
+:10C63000FF640F100FBE03147D19EC963DF0BE9100
+:10C64000E11D923D4156D6F3F7DFDD459DDC1B6CC5
+:10C650002D761D94C05809DF55B9AC8F44D352874D
+:10C66000AF7FBE9D4459FE045BFFF5ED4ACF1683B4
+:10C670001DBF54888F59E351AFD4713C09B9B194AF
+:10C68000E38BF2F9E67CBAFE65CE16B41B9713A6CF
+:10C69000D76F24118C6FDC68E1F335EE3FBF65B3D3
+:10C6A000411CCDCCCF6BE972D8F9FAE0C3BFA3F03F
+:10C6B0006F7CC0E305FDBFB6D7DCAEF181978F304C
+:10C6C000FBCBCCEF8D82DF23667EA70605E3F7FB6D
+:10C6D000CFC3731B713FD0E51C7C4B27B1FD0EE926
+:10C6E0007D0BFFB9E0BE6031F8353696A7C8CB6246
+:10C6F000DE4FBB995ED6A95EE67E108ADC4FFB2F2B
+:10C70000C17CF852A147B99C11FC5CCAF5FC303DD4
+:10C710005E6BF577EE433E99CA4B56FD2DF4B6B8E5
+:10C720008748C745FD4DF5F5CB1A5D6F9FCD1D01BF
+:10C7300078C7F47604F9688A93CA6B1BE2EF00E0CD
+:10C740006F1AC75B3BD7EB09FD03F7FAB8FE01F59B
+:10C7500037F01C61B85F1035D9FBC3CE3112D8FF5A
+:10C76000437873517B2A05FC7DC2ECE23C32AA3C43
+:10C77000112AB7DFCC1F416F2BCFB0DF0777B8305E
+:10C78000BE20E2EC82FF5E2F6076F8B65CED3D9055
+:10C79000FFFD7CBE7E3E7EFFCDF3F1FCFBCF44C3AC
+:10C7A000F36FC867CA8F937F01E7DF1D8678697FC3
+:10C7B0007AFC38F8275CFE941610FCFEC9AF7D0A9F
+:10C7C000EB3FA6B038FBB164FE4D65E714FF3BD4E8
+:10C7D0009EC98F4CFE15EF911FCB30C7E7453B3FFD
+:10C7E000FFBEDFEA0C7518E2E181FB935A408FF936
+:10C7F0008B785EFC7A46C7279F4ADF617C272E50E4
+:10C8000050595A300DDA694A2EC4679E62FAA2D98D
+:10C810003EA0C0FB3E3E7F38A5C00FF79B88F604C4
+:10C820008C1318509650789FE4E7FE27F97B402739
+:10C830005DEC2BD6152858540AFD4EDE3C80726301
+:10C84000A8BC6800E542A02084F39E5C2AEA79F93E
+:10C850006E5626DCAFACE47C8271E33871E2E171A4
+:10C8600061F37B37EB94F8E7D5A4C0638AF7AED8C1
+:10C87000CFE2902B9DA4339FD65FBD3F1BFD8DC69D
+:10C88000547D02D0C3D78DE39E1CD387FBDA523987
+:10C8900038F6C1323C17C678D1DAFDCFA1FC5B2B4C
+:10C8A000F866AF996F66178CEE3CC51A671F053F97
+:10C8B000CD2F18C10E7A12F4972386875B787E53AA
+:10C8C0008DDC540D71A54F5713BC677BCB0B32D257
+:10C8D000D52D3F92F0DD0961C7ADE5704EB42FB89C
+:10C8E000A71030C815B8A71030F875704FC158861A
+:10C8F0007B0AC6F6704FC1580FF7148CF5704FC104
+:10C90000582E25D7B6439C6E5D17F14602ECDE82A9
+:10C91000B13FDC5B3096E1DE82B13FDC5B30963FBD
+:10C92000250C6E9F3E2463FC1FEE2F18FBDFF0C228
+:10C930008FCBA3B06D17CB536B7751F8031DEA5A19
+:10C94000DF240A9FD51C3E70BFC138EE07A9173DF2
+:10C950000FF859DD77FD42F85EB0EF26D3B8A49BFF
+:10C96000C9E316FA17E0783D09A5813F37850C1E0B
+:10C9700082784773445261DE1B1E30CBEDA1F74C29
+:10C9800022E6DFD71043FC37383CEEBFA5C0E343B7
+:10C99000BACA2379C6784F8C1EDC6A14E0F09AACD0
+:10C9A000C6A38752726E1AC6799E97218641FE48A9
+:10C9B0005AB6CF920CE703167824E598E9C21530F1
+:10C9C000D3454AB1992E3CAA992ED22ACC7491AE65
+:10C9D0009D37227C336BCD74B2466E42BE1770AE6B
+:10C9E000A07F01CE53E0854A802FDD27C48BADF0B8
+:10C9F0006DDCBFAD13ECFE3385EF9316F87E466613
+:10CA000055BB03585DE72C8FD93165CFB7E021B016
+:10CA1000357E2AE028EC081107A5FA1FEDE9985F9A
+:10CA2000CFFC3D6A1F1C2CC0F303E6E7012581DC27
+:10CA3000BC8E84513E5D67B10F6E70DFA7807D3084
+:10CA40006CBFD43283F70BADFB057B8B18E25256DB
+:10CA5000FB40DA2F453D9361BBFB859C0E7F89C669
+:10CA600090268D466EF47AB4FF02B9058EA2B3DC2F
+:10CA700014378E6BF7897508B888F993488B9C0337
+:10CA8000F45C6CB5CFCCFEB5F0C745BC5DC4B585D4
+:10CA90003F2DFC182B9CE57382ED40FF53BDC28FE8
+:10CAA000EEBB0A7E17FEB3D56F1DBA170090857BCB
+:10CAB000373C4E7FA77F9593BDCBC7F84EFCDEE990
+:10CAC0005B9C36523EE61DADE67B30741BDA88F780
+:10CAD0008A00645970EE4420A842B65E7A6800DE8F
+:10CAE000DAD97AD98B83CFD2EF96921F0C6C82BAA7
+:10CAF000535FCA00D7A1783E61F78415DE4F29E85D
+:10CB0000BC19F468B26A27EF1AE8C24935D5BBC52B
+:10CB10007C5ED0133943F5BF319EEBFFA3BE775146
+:10CB2000F8BC3B7E847A456D8C67D759E1259EC35E
+:10CB3000704DBAE838D8272E62D837EA4343598E69
+:10CB4000C10B55AB8CF7A644BD06EF977CDD7D018C
+:10CB5000DEDF7518CBD157DE7718D71F617905F660
+:10CB60001081FC5BC547EB8DFA65880E2943951B48
+:10CB7000F6378A7D01D380FBC9EC1286EFBFD5BEA4
+:10CB80003A2CF88271435967F5FAF4B37C7DD1B33E
+:10CB90001CBF64D1D90D3F6DD1D90D3FFD2C5F5F16
+:10CBA000F42CC72F597C76AF4F5B7C76E3573FCB95
+:10CBB000D7173DCBF14B969CDDF0D3969CDDF0D39F
+:10CBC000CFF2F545CF6EFCEA6807BA2BA204DE97D8
+:10CBD0000874103518A0262BFD19FCF92295609ECB
+:10CBE00006E17E4921F74BB66D6DA90717EA115D85
+:10CBF00009603C88FAF739B47E2261F58F742DC63E
+:10CC0000386BDB980979F05E95BBEBA2E3707F6F20
+:10CC1000A2CEFC71EBBF1BB64833FFFB6B9757648A
+:10CC20009ACAD3FACCEF575CD55864AA5F1E3EDF90
+:10CC3000F2EFE74D35FFBB64A19996F7206E26C64B
+:10CC40007B918524AA427CA5F06E5B159C9BD9C183
+:10CC500067BE90FEB753C17E1AFD6BF45F0AA92729
+:10CC600034347E10E0A698C6775BEACFF41EEAFE65
+:10CC7000B1F1EFA112786432CEBD736B1E26B1DF25
+:10CC800088F13981AF3B37DBD0E5FD6C2BC1771ED6
+:10CC9000AB23011BBE83CEF1763E273DB1EF48ABFF
+:10CCA000F93E7AA14EAA009F451DC406F1B5E04E9B
+:10CCB000A26A04E34248278FE8F1E9E411E2AD8279
+:10CCC00077B91E8910FC77B2045DDCE908E4C1B9CC
+:10CCD000DAF95D8C1E049D04804E52212FC8FAEEB5
+:10CCE00080155F644A94AEF591AD8519C67C54B247
+:10CCF0009BC1DD49FF8E84AFE29D667C0588A1FC67
+:10CD000015F0F5E9D7C497E20B45D37C10CF240189
+:10CD1000C8933A3866820DE011EC52D1FFAFA5CD31
+:10CD200000CEC12EF69E9AC093186F6B2B89CE331E
+:10CD3000F87F4135AA019C6BE44955907FBEA30C56
+:10CD400043C6C3F0B383789321EEBDA3CB968C6F1B
+:10CD500054EFA3782921E4BF372F4B2BA6F53D4193
+:10CD6000920CEF6CF5B4D9F0DDB29EA7A47AF3BBB8
+:10CD7000CAD1245B0EEE23C956815F3BFB6AFC4B94
+:10CD8000ECAC3E2A4379ECC661EF7EC8509F5E6BE7
+:10CD9000F97703892641FBE473581E679A667ECFB4
+:10CDA000C651619607148C7D39E5106FE1F4CEDF32
+:10CDB000498DD490C826BAEE73B8DCB1D251FA1DB1
+:10CDC0008B9198DAC67C03E5594F9B82F077707996
+:10CDD000453632BAD0E95FA0A7740B1D7954331DD4
+:10CDE00039E402CCC3157C25D623E66F1B93956CE2
+:10CDF000C775D9F13D6C87554E58D6E7866020C57A
+:10CE00009DDB4722115AEFD0197F10B91F7F774C55
+:10CE1000272433F815D6F935E553E89CBF8D7CF20D
+:10CE2000F031EF9CC6F6F999CADEB5AEEE60F4EECD
+:10CE3000D9CAE81D6E74B37C2D6D61AEE15C752FAF
+:10CE4000975356B879FAB46AA0E78BE49734C88F41
+:10CE5000B8FB3546FF6D630E3F0FE5AD7733F8073E
+:10CE60005586674A2F6A942EFDEE3BDC98173CB539
+:10CE70008CE20BF0FF92599E4CEB33C3B1C82237C2
+:10CE80008209E06AE5D74470FD96806B39856BD1E5
+:10CE900099C355D1997C4E9FC5DE593C384661FFF8
+:10CEA0003EAFCEE098AEA9287F2F924F45D368BB06
+:10CEB0006D1A9537749DB51A83B7779690E36678A7
+:10CEC0000AF922E05FC8E1EF55BD2FC0BFF3E2D6FB
+:10CED000ED2420017CFF5B033BA27B9A9037830407
+:10CEE000F096A631BA1570EE9ECDE05CA871387749
+:10CEF00071B8494402385BE9D52A9FD3BE269C7796
+:10CF00009DC3E3F159A4FCABC0795B0A7B47D931DF
+:10CF10008EC1D5E11E8C829CED0ADA715F07820A10
+:10CF2000D67795B0FAFB5356E680BEEDF277E60071
+:10CF30005DB605AFCF01F9EECAE1728668EEDCF2AC
+:10CF4000D8BD831A792BBE43DA1950103F9E407C1E
+:10CF5000F995362BECC47926D9898C7078488D07E1
+:10CF6000076799629297F98D66F8A658E0EBFA9AEE
+:10CF7000F2E1B5AF291FEE216CFD778E17EF347407
+:10CF80003B513F55DC8471F34C3ED7E685DF65BFEE
+:10CF900073BD66F8BDB610E489DBAE023C13ADBBD1
+:10CFA000A795F0F75A9CFCFD16F6AECB3678D785E0
+:10CFB00096BF03EFBA2401FDB3775DB6C0BB2EF474
+:10CFC000DB05EFBA9C0BF6B4865FF9D2427C7FF0AA
+:10CFD000B35A82F1F14D297F25F1E055D465D67F12
+:10CFE000413DD9F20E9B59CF65CCCB3395BDB3CC27
+:10CFF000EFB67954F66EDBFF0164680340008000F1
+:10D00000000000001F8B080000000000000BDD7D09
+:10D010000B7854C5D9F09C3D6737BBC966B3B9924C
+:10D0200040124E42081B0861810483829E84406343
+:10D030004D71435151A88D40314248285E1A7FF509
+:10D04000C94282841834A0585A2F2C378BB56AB441
+:10D0500051A922DD2052FAD5964551F152BFF55221
+:10D060002F40258A177C3E5BFF79DF99D93DE76425
+:10D0700013C0E2FFF8FDF1C1C99C993367E6BDBF5B
+:10D08000EFBC332184906FE8BF04CF0412F410FC8E
+:10D0900081BA433D9704EDD1FA23C3EB1C6A3A21D0
+:10D0A0005677A5E139F1F7115F22562D248390546C
+:10D0B000DE365DBED71E2E26644DCDAC24520CFD4F
+:10D0C000B450266D4F80469590D5566F968F3E4F43
+:10D0D000A85954435C84AC6A2124388A90F6163BE4
+:10D0E000962B726CDE601A2177BE2C7BE3E82B3620
+:10D0F000CDA7B969FFDE9C5B09A1CFD7B80919920A
+:10D10000479FBB9711924F88423F20D1BA5233E3D9
+:10D110002352425F98B3849049D1F9ACA9B1788386
+:10D12000A584C4253BBDF07D52ACBC13A66D6EFA40
+:10D13000DF37F4FD6FE0E782681947583BAE13BE56
+:10D14000A3EAEA04BE676C6F7E537A74AFAE7DAC1F
+:10D150009A98F63E2CF61C72CE37322DE579497539
+:10D160004E5A96A71092D5FF7B5FB69047F78E4434
+:10D170008012920E653D01782A7CCCD5C9B3ECC4EF
+:10D180001985B378BECACDE01B27D1CAE4FEE3B649
+:10D19000015CE3A2758510AD1BF0915D1AB3BF2849
+:10D1A0002906082923A4B32578F03D6BF4B9730A46
+:10D1B0007DDFD9BFFF4C55C679CF55552C9D4A9080
+:10D1C000B869BF442F7D5F0717A77666DFA73FA525
+:10D1D0006974BD2E4E37E477920278B5F37A8254A3
+:10D1E00037572D037CF9081941FB956BA4AE987D48
+:10D1F0004F13EF49502AE41D41DF79AC74D3760612
+:10D20000522869BBDDD8AE6620BC705C25FABEF63C
+:10D210008D34F0BCBFAB12F0F8CEC841DA6DDE7AC7
+:10D22000E0A77ECF558B80635F1A859BCCD71B030D
+:10D230008E6DC0DF028EB293C1B14DCADB19A6FC60
+:10D2400066D55C5E8A115291A676035FB6694EE49C
+:10D25000CBB6B4EE5025AD9F28B57861A8C49195A2
+:10D26000C88F6D43F71D5E08709DB9FFC36D08350B
+:10D270002D5425E04BDB133DD5A12A9DBC11F88A26
+:10D28000E7BF778C7D20BC9296A917CF236E4A2AE0
+:10D29000CE21362253BC384656D9EB9C51FCD8E0FF
+:10D2A00017FA3C3E6DC64732E5FB78AF0E8FF0EFC4
+:10D2B0001B564778D0C5DBB26FFDB904449119E91C
+:10D2C0007700E6A3A8BEE8FCC8D9C717C94E43BE7D
+:10D2D000278A3713E4657F7AF733BEE7FD06E60B4E
+:10D2E000D66FBA5C93791585CB9A17987C241E2645
+:10D2F000176C7686CF354463EDD98A97BE41D664E4
+:10D30000AE44F9D1AECE6F07F9F979A685C8123CC3
+:10D310005F6F07F9A198E447BACF62D00743E6C42C
+:10D320001BE4FE9A825928CF069A67569DF1FD614B
+:10D33000F5C6F77396A518EAE23D6BE6452F55A5AD
+:10D3400046EBAB943A3BC8915B33D74B753AFA1E28
+:10D350005254F73AD0ABA8DB3267E27B7139A53182
+:10D36000E7B5CFA3BD0572A25D65F326EED870BE0A
+:10D370008BEBA1BBB91E3AD53A37F2FEBFE6FDEF03
+:10D380006D716319C167C13506BCACCEA2F29A8E2D
+:10D3900007B0D77FFF29B5EE73985F14CF96287C2E
+:10D3A00080698B175B805FC5386D59F90EC0DBFA59
+:10D3B000EAC1E727F4AAE867557CC44BDFB312A3A0
+:10D3C0001CB7A5590CF89890C7E5C6B66B0CDFDD05
+:10D3D0009B3C63631EA5ABF587648274F73BE3FA5D
+:10D3E000FAD3AB711DEB33D9FA07A66FD3BAA944B0
+:10D3F00088D011D6534CF5A1A6FEF9A6F6D1A6F613
+:10D4000009A6FAB9A6FE95A6FA0F4DFD6799EA5747
+:10D4100098FACF37B52F36B52F37D5FF8FB17F2983
+:10D42000C3F3F5E2D920F205F4BAB9BFA268885F68
+:10D43000A1E7237CE536F2E30F722AB43C66671855
+:10D44000F02BE8F374F1B39ACAB810F093A23A50F3
+:10D4500099962F267A7A589F998FFAA38D4E0BF5BD
+:10D4600037B75F52041D5773FB70CE12031DF5E6EC
+:10D47000143AC07E24CE34944BA7A20B89A418DBA7
+:10D48000B5A1D1F67CF8FFD9A58B53D37180EBDD24
+:10D49000C1E72DE4C023C37DD7223E02D49E1E1BCC
+:10D4A00085931AB1A7E9C728DF6D49238138AAEF10
+:10D4B000B6F82D58FF3C937E08EC952AC687237852
+:10D4C0007F42C2128C23E6D3CEE9651DC8295ADEFD
+:10D4D00001728A96B7B56462B97AAD256B218C5713
+:10D4E00063433CA58EBBD5AF4059595E04FAFBB6E9
+:10D4F000B13B340BAD279E94497022B5174AAE2834
+:10D5000087E5244C9F9FB9173EF735FDCE24E04EAA
+:10D510008246C6E62A12B08E2364ED9EAC1F7AE8DE
+:10D52000B86A81E275405BB177859286FDFCE03692
+:10D53000A84ADFFE11B43EBCC082F685B5BCAF057B
+:10D54000EC7731EFB53FA4844B3BE6557B2D7E0A4B
+:10D550008215C3EB7E05701ADE492C1AADAB7E55E1
+:10D5600002B9F6469E8AF276EB1F28438E800FF5AD
+:10D5700065819EFD62AD6D25CC73603C11D952FE74
+:10D58000ED4B310EDA9943F1B906F4AC2A484274F6
+:10D59000951F76C13C9D32AB3F9777CCB7B2385AD6
+:10D5A0007F2CEF987B256DEF9C986B8175E4A5B976
+:10D5B000B4400CBA3A0CF218D6B776D170BD1E340E
+:10D5C000976A0D1D77082D8B7909B4760EC09F9749
+:10D5D0002A7F9EC9EA0738DCD466DE9EC6CAB3FD40
+:10D5E0001DF3F8AFE5B9855D3A94FB8FC5CE8C414C
+:10D5F000EDD3C37965FDED532AE886029D6FB27ABB
+:10D60000875AE8D89BD6DA889FF2D4A61C827EA2DD
+:10D610007F8D2DB01DF84351875EAAB3BB026B32DC
+:10D62000AED0E8FB0189CCD1CBC97B399CEFCA973E
+:10D63000707ED3E5637E99D2EF263F413B6B137139
+:10D640003BC01E89E0DBFFB90FE990E3BB2ABF6A4C
+:10D650001DD02959C8F4667E549EAD50E8389B61B0
+:10D660001C5ADFDC6EC1F96DDA45F9977EEAF39B4F
+:10D67000DFB180DD3C96042DB0BE312480A5872C1F
+:10D68000B30050BAB91EDFC6F9B790F237FA3B20A3
+:10D69000FA68FBA5C3EBBE06BE48222AD655BF1BBF
+:10D6A000E9A9715772652CFBC0966FE17E26A957D8
+:10D6B00026713F87C1D9965FD61FFE56B20CE17E18
+:10D6C00093C767CF07FF6EE7C1E030DAF4C4AB461B
+:10D6D000BA05A8CCD2C99D1CFE9D24AF4F93E93852
+:10D6E0007B72EB92E1FDC6FA4FF665C0D07E3FBE7D
+:10D6F0003F39DF8DFDAE08764F8761C679C395400F
+:10D700000B63AB7BF700C98CD136839B413CE53F73
+:10D71000DF93AAC23CEA86C23885A17005908FB318
+:10D72000FE603003E773BE05E86204CC87D3472D63
+:10D73000D2978A7422F00DF4504BEB573430F850E6
+:10D740008310DB89E236CC7FCB2A4A27CEFE749247
+:10D750009ACFEC236F148EC43AB87FE5CD8F41BFCA
+:10D76000022EB37ABC560817F87EE75E053ED0CC91
+:10D7700040DF5E077DDE9E5B770EACB374A3AF1512
+:10D78000E8CFB92BE4877E024ECE29214DC27EDA46
+:10D79000B9D06FD3CD9595A817BA08FA4B427F9AA6
+:10D7A000F16F9D62B4F708E9C2F58CEC32DAE994C6
+:10D7B0008E519FF7A3E39B23741CAF8F4B08FD137F
+:10D7C000E8B4C47BC0CFA0FE078E35801C7980EB07
+:10D7D0002541D7E27901891D67B8323FE2CF66CA99
+:10D7E00083C3FBCAFC18FEAC0BF86304F2CB7CC00D
+:10D7F000879BF461FBF09B8DFCD2B8F3937DC3E86B
+:10D80000FC9DA5EA04C08FF87E03C737A5E3C54891
+:10D81000C71BFBF6815E1B7E33A3E36BC1D6488F2B
+:10D82000D2E34D1E6D297C47D099793D4BF87ADAC9
+:10D83000737DD7C278576CEC7EDE81EFF9AE473E40
+:10D84000DB180A3A4814BEC3397CE36E89E0D90D6F
+:10D85000F263568DF779D0CF3E8F7B3A9433D5BEA5
+:10D8600036302DE6D6CB06BBCF8C5F4A5FAD485F26
+:10D87000C4374D92C09AEDB6A2FE1C806EA27AD338
+:10D880002FE8FEE653C8ED3B62E1E174C73F99EB38
+:10D89000BB1BDE4FA9F611E4D3D39DD769F61371F4
+:10D8A000B3A81D1BB0EBED5841F71DEDB3D04F16DB
+:10D8B0007810CF57B5CFAACE033A772ADE58FE4F5D
+:10D8C00044DF703ABF9FD3F97A6E7F7571FBEBF638
+:10D8D0001615E57B678B07CB8E162F8F879663B95E
+:10D8E000AA45C37EF29A4F2BD07FBF99605C6B65CF
+:10D8F0004289148BAEF2FC467B7F78B311EFA9D539
+:10D9000046FF3B596F2FD37F49E5F986F644EF6810
+:10D9100043FB69C48B0F00DDDBD22A0DFD48F813F1
+:10D92000837D2BE0385D9E87F1620A4FB4AB853D65
+:10D930002BDA09A9C378AED5E467769AECD80E80C5
+:10D9400023C297C1B10BE088F02DE7F0AC667E13DF
+:10D95000F77BE285DF53B47ECE7C8C8B1094572B03
+:10D96000726CA89F3BF298BDDD8F7E3275F293F208
+:10D97000FCEA354C9F0B7BFCF99C57AAC1AEDD92AB
+:10D98000694139B9256D8F672BD6E3BD4C9FFABB32
+:10D990003C147F560F8F57538ACDA2EB4DE47CB3D6
+:10D9A000DA4A30FEDD91EEF4421C2CD1B3A806FB1E
+:10D9B00099BE4BC8CF89DEFF23EFD51BEC0EA25CCE
+:10D9C00063586764FEA536368E44241827A5D866AA
+:10D9D000C09F9DE8EA79305F5B148F79B05E8E2737
+:10D9E000939D23E214663CB96B8CFA6675117BBF7C
+:10D9F00037E701C4BB19BEAE2A23FD7670BA684B67
+:10DA0000DF827C68EE6F1E9F4C8937F87F1D9EC1B8
+:10DA1000E324C29F16FDC08F76C7E86FF6A3CF86BA
+:10DA2000BFEEC6EF19F55D0C7F7DD2085D3C49C0A5
+:10DA30003B8207115FE47E98885B8BF114C2C6C3FA
+:10DA40003AC6B7FD28FF7E99E0423FB2C0690B801D
+:10DA50002C2CA0F3003A6EFB55426025ADAF4B98DD
+:10DA6000D99744EB05DB6415DB9DBEA11067EEDDA5
+:10DA7000306368987EF71EA9EEA211BA38DCB6E4CE
+:10DA80001B32993DA0BC13F600934BE8E7FAD74D43
+:10DA90000C69608F1711EF76025E306B17F444F457
+:10DAA00075B97FFDB3114CEF66CE25CBBA63E07F2D
+:10DAB0000D6F8FCA715F3CCA6B2EC70B38BCB6772F
+:10DAC000CD8AD7CB71DDF3A4587475B6E4771BC843
+:10DAD000EF51F09D1735D4DBA584CBEF47C8F75144
+:10DAE0007E2FCBAB5B3DA22CC67E9F1246F93D51EB
+:10DAF000D5DA01EFE9E0EF015E7E4AF112631DCF56
+:10DB00008E60F6CDF7152F42AF6EEF7A9CE1A558E7
+:10DB1000E0E57612CBFFFD1EE0E569807B3FBD4A64
+:10DB2000C2B80FFB45B6F60CB43FA56ABB007F1127
+:10DB3000FC5C169B6FFEF91DE3E77EEEB7AEE7F8DF
+:10DB4000E9E2F1F1DB397E3AB9BEEEE0F869E7FAD5
+:10DB5000FA56C04FDC99F3CDF066237E52ABE34D0D
+:10DB6000F830E227A9DC889F44AF113F099ED126F7
+:10DB70007C18F1935EA022FCE2328D78EAC737A7C9
+:10DB8000F057D2609C187672765DA802F6B886CE01
+:10DB9000E9EEB5C220BEAE0A28C57AEF35F9A5A2D6
+:10DBA0004C2F6078CD9C161BEF16DE1EC8D7A40242
+:10DBB0003D9DFC20361FDB79FF63AA1667E87F5185
+:10DBC000ECFE2EDEFFF5E15AA2BE3FFDB94B1EC4AE
+:10DBD0005F30AF3F41D2D20B701DEACE30C5FDB6EB
+:10DBE000156C1F729B43ED86FD7CFF0AA777BB8AED
+:10DBF00023F9ECE01FF171883F09C7CDE59F19EECD
+:10DC0000DCFF15ECFBE52DC81E7A356DCF5B9E79E8
+:10DC1000A48E96A30B46E03CF3EBBD7B00CEB26B2B
+:10DC2000CE50B67F3CCFFDFE184A6AC154E91B7046
+:10DC3000B8DDB1F7ED4529F42995836807D2890449
+:10DC4000B6533A8D5388929802EBD5705D56B06307
+:10DC500065586F17D6E34937964E1262FBD7DC1F23
+:10DC60003DAF200FC7731337FAAB29C48BA5E06310
+:10DC70007B1A51D227E0F86D7113082AFCF3C05FBC
+:10DC800075666FEE009F46A3509884AC82F090EECC
+:10DC9000DA87EB271EA2B278DBCD6ECC4FF8335D6E
+:10DCA000DF98D35FDFE9F6FBD2E12A21498434DB38
+:10DCB00059F98B78D71628BF74E4062068A58DA87B
+:10DCC000FB31E0D55F49D0FEF0BF951068C5C92E85
+:10DCD0003B87F907A73DCEBCB334CECFCED2388D2B
+:10DCE00005E9A71EE736F87532EC63FA9643FFB6EE
+:10DCF000E44968778AD20CD77D1EED06989F627F33
+:10DD000029F7BDD4A8DDE67C5342BBAD4D0A12888D
+:10DD100053FADF96D0BE22C50C4F4E9578F2C64519
+:10DD2000C7717A970D67F12E16EF59F1F75F8C02E4
+:10DD3000FBFB970933C349F4FDAD07A99D0779346F
+:10DD4000D3BCAFD7537A4A4FB579B750FA49E57E7D
+:10DD500072DCDA4907EAE9AF9F8C62FCBDA365BFBC
+:10DD6000BB8D0AA444C57BE104FA9E93EFDF12B990
+:10DD7000260C7663E22445853D8E2239580DF32525
+:10DD80004D16027C714F83713FB7B3B008E122EAB0
+:10DD9000C3F87E2E2955FA227936D48EDF58C0F387
+:10DDA0006A5CC40576A1F26F2D2956DE8328C5FC76
+:10DDB0004AD3A8DE4A82B820E5145A96760631F98D
+:10DDC000A3D21BB4831DBB2140FC360AA707E7FB87
+:10DDD000AE81F13ACB7D0960976F3834EBA2B17414
+:10DDE000DEA1B0E205100447A5E0BA439ABC368133
+:10DDF0003EDFF9A6C50DEBDBCADFEFF449C8FFF73C
+:10DE0000CC23013F85C7D6863D7619ECDE90858C04
+:10DE1000443B973A5C93B82854215ECBF8FE965168
+:10DE2000E9F8B027B43C19E0B22EE1FC9046C7AF48
+:10DE3000AD6671E71972F6F3306EA8D386F849E73C
+:10DE4000F94712A945FB39659ECE5EA6FF123B99A4
+:10DE50005F19BA8E60DE535299D3EBA7DF7B22CCD9
+:10DE6000F68DEEA96671671709E2F767C8BB1C1645
+:10DE7000FABCA75A71033D2599EC73278C4749AE2C
+:10DE800067231BCF359E8D9768CA83B28B79B9E91A
+:10DE9000BC28FEE44405F1ECAE36E64FB94CEF3950
+:10DEA0004DDF7B59E0399B14029E4FF86E98F812B3
+:10DEB000B67AD558F9139D2D2454A5CBB7700E1002
+:10DEC0003FFCB290F909B6ACBD7698D709DF2B6953
+:10DED00010EE7AE15FFBDEBB03CA7FFF574F135D95
+:10DEE000D75FBF3ABCED518063F36D2F221D72BF27
+:10DEF0006A084C81CEE7F95A1BC2B14C63F101525A
+:10DF0000DABBD75A8AEDB8AFB5768F03DB87959326
+:10DF10008083C27398A265FD0CF835247B57A83026
+:10DF200088E6CC9A44D85615ADAFBD92120E950F27
+:10DF3000E9F334D95F0CF190174822C5F7064D522A
+:10DF400059FE9BF43CF0534E95847E58CE219F039E
+:10DF5000E8E1C46C0BE6BFACA8BDF4C29174FCFB55
+:10DF60002A148C375457555C0EEDC30E317A715D0F
+:10DF7000C7F047E114ACA2FC30E2108B279492B0BA
+:10DF80003748DB877989350DF4C73C0A60985F27ED
+:10DF9000C70F8F0F949686FC00D444AF118F6E1379
+:10DFA0001ECD78758DA47804FD52448A985FC7EC25
+:10DFB000C75ADE6743D544F45FEF5189DF3AAE3F7D
+:10DFC000BE5EA4F6A346EDBF10B51FA1FC1BB51F96
+:10DFD000A1ECA1F62394895AC545A574BEA1743A53
+:10DFE0002EF05F4DD94AD81FB86FEAD537FD93960A
+:10DFF000657C9F8D726A4A25FDCE2CE062565FAF2C
+:10E00000519BE4A552D9505F9BA6887D3C3FE8D444
+:10E01000C42C0BDFE79971A746EB9D990ADFD76304
+:10E02000F511C5C450EFA9B118EAE7EDD18D3F0550
+:10E03000F01387F5092377AEF71744DBEF28A475B3
+:10E04000DA7E80DB73B54B2DBE2D31E877D948469B
+:10E05000BFCABF895FA2F8FAAC80A09F2E5B349440
+:10E06000DFA4505141BEF6D7CB540EEAFDEB022A95
+:10E070005775F191C3853CAEEEAB60713612FDF978
+:10E080007A12CFB322F0BC330476C4ADAF5EE90D93
+:10E090009281E5AE355339A2A7938B051D8C2423BD
+:10E0A000D19F27530E54009D754D54801E4A391F31
+:10E0B000106EC761889FD2CF539FDEFD174D053F7D
+:10E0C000ADDDDD3612F37E2E1FA9CB935995BE68C8
+:10E0D00022E83391F7434895FB7DBA2EC97FA90505
+:10E0E000ECB681ED1485BCAF83476FED8C24D00373
+:10E0F0004E2EC7CDFD57B5EC7C05BEBFBAA51B4B58
+:10E10000679A0F858C5DF163FC669FA7AE11E6658B
+:10E11000CFA6ED3A396C4BA3EF19FC806C667709FA
+:10E120003CB809C683C4BEC986CE09F17114189DD6
+:10E13000545F807CDE109A8579159DDE0983C6AF19
+:10E140004EC5275BAB5E2269148E4FBE3AF32FB3E8
+:10E15000697910F88DEAC12738DFE4943FF6DAB523
+:10E16000067E396AE297A3267E397A0A7EB9E04EA6
+:10E1700068EFC9540CF51CE0175D7D6B845F583D5A
+:10E18000CA2F47915FEE79D986F58D238F1AF865EE
+:10E190004521AD67EBF865BAECDB12C30E78E53BC1
+:10E1A000E2975F9F29BFBC7166FCF2C4D9E3973F39
+:10E1B0008E4CFFEEF8C5779AFCE2EBCF2F87605EBE
+:10E1C00067CA2F9DEE20E60376CEB6540762E0FBC9
+:10E1D0007A8E6F11F72EE3718A69F3B4CBC7823D53
+:10E1E000CBF3D6443E4DE73CA6BF57D4CE407DB9D5
+:10E1F000F520D397423F97713CFE8DC731CA424C00
+:10E200006FA6974BF8FE4C4D0AA8F4D74E6A12A49D
+:10E2100082BE9E22912E1596BAAC76A414B59BE8C8
+:10E22000F7D06EBACFCBF266C92166EFD8E97F404E
+:10E230004F17975B0D7A7588D9FE32D5C53EA6D8A3
+:10E24000BFBC0FF212283CBE1EC9ED2693BE15704E
+:10E25000D870A812ED90CFB36D83EE5775F2F546E6
+:10E26000ECA9525F45AC78587DA184F0BEC9A3C526
+:10E270001796813EBE0AF5AED0E766BDDC53F59237
+:10E2800051CEF8C7A75616EBE48C7F3CEACD889CAC
+:10E29000E1F501E50C3907E546442FF37A442FF305
+:10E2A0007A442FF37A44CEC0F8D951BD3CF281F1C3
+:10E2B00077FA757A7B19D4B34FAD9717707970B62A
+:10E2C000E5CC1FB8BDFA5DE9E5CA424E2FFFB99C07
+:10E2D000A929FC0EE54C2DC899A453CB995A90332B
+:10E2E000C506397355E1B7D0CB890DBD7ED8BFBF08
+:10E2F0006200BA77707C371568D7C0F8A4E6F4F2EC
+:10E30000B6CD74D55BFBC0AA0CA0172FF3F3067A29
+:10E310003FB1F9F7AFB4E9F2A21395103B5FD1FC1E
+:10E32000243E9FDB7010E365A79A6F7D21C1D2ACBC
+:10E33000477B6BF7D9916EBD16DC13FFB6F3E89CF3
+:10E34000CDF8F28DED4FAF073EBA8FC7FDCC76AE5C
+:10E35000C0EBE9DA3FE6EF5E3F52C571CDDF3F1516
+:10E36000DD523ADD0C747A22FBBA31E0E7C98977D5
+:10E370002500BCBE07FAF0C96F43A7AF8C64F83C18
+:10E380008D750761FCEF6ADDFF017FBEFC6DD6BDB8
+:10E39000A090D1D569ACFBBFBF4B7CFF07FEC26725
+:10E3A000DF66DDCB04BE093B2FE3865F289FACFF11
+:10E3B00057E1DB10BF58FFEFD18FC13ABBBEB26F40
+:10E3C00086F805F9FA1BD9AD3F3F45D8B99944FE07
+:10E3D0005EA28F9D877157EBCE4791E879295C0F3C
+:10E3E000C63722ED07629D97FBAE4BB047DEB10EFC
+:10E3F000D26E63713BF3F3FF2E90D83936A9D60164
+:10E4000079F1BDB3F760BE41E7EC09B86F65B6536B
+:10E41000C47B3D2D1AC6933A5B7C58DEDE521D82CA
+:10E42000B8C9932FBD25413E58E94B0DA8DFD64E04
+:10E43000FAE130CCE39B5A1A0FF5DB4D768A8BDB81
+:10E4400029DE51AFDFA9F75F9EFC4D13CA4111874A
+:10E45000BA2362BFD0F7549D9F44EB400E113F0991
+:10E46000EA063F69D97AB05F7AC07EA1FDA78E5ACD
+:10E47000B63ED677D65A483DD82F6B1B2CD5B1EC7B
+:10E480009770416CFB85D671DFCD91680FACCC03E2
+:10E490007B86D4E9E36AA7B25F1E1EF5DDFA495711
+:10E4A0008C3A3B7E52846FB9DD32A4485B0821D997
+:10E4B000B32527869DA69C18D65F4EDC38EA5BF80C
+:10E4C00049E102965F2DE86BABEAC578726735C10A
+:10E4D000F8636768656A09AD3FD1602112AD5FFFDF
+:10E4E000328B0B6F2827013847BB219B603DE465C9
+:10E4F00074304376FE08E2E03D55D47F52216EF73A
+:10E50000E35A80EDBA8499B73928BDD4962B04FC20
+:10E51000A619F214FC4E4863F9A1B54EF2A338F0E7
+:10E52000ABA62A64E519C4AD13E562897224E54FF0
+:10E530003519F876A078B439FE4CE417BC802F73F7
+:10E540001CFA4CE3CFDB055D7DFBF833F2DF970F60
+:10E5500034CD8278EEA9E871C12815F599594F9903
+:10E56000F958D0D340F4E7043B69A2AECECFE186A0
+:10E57000F93EB513ECA48951BAE8AD9D94142BFF74
+:10E580004A9409CD7F78457F1E2F41E9C6F1129A42
+:10E5900077E1F3BB206F00D6A778519E3E5849E53E
+:10E5A000708CF9ED6E597608E4E7AE96662C2F5024
+:10E5B000FAE414DAFFE916FF2180DBCE96762C9F71
+:10E5C0006CE9C2F69E968D58DED112C0726DCB0EEC
+:10E5D0002C6F6BE9C6F2C17CF69D294A10C7B9E0E1
+:10E5E000241D5F474753FBE87774F83EEF43BFA114
+:10E5F0007D72B8DDD07ECEE12E43BD2CB4D1D0DF0C
+:10E600003D2560686F2AA83B067CE92ADD6178EE2B
+:10E610002CEE36BC77BA7EC1D9EE976B7F04B6C9B3
+:10E6200049329CBBA0AFC8706E88F2F190662A5E3A
+:10E6300069FDFE441EE7E866FBE49924F283740951
+:10E64000A964601FF426B23CC8D62CF67EEB8DACD4
+:10E650007E7F0EDB3F12799AB23D42D744CA88EEE4
+:10E66000E7DF9FC8CF2915B0BCC8DCE200442448CE
+:10E670002E24A8C17E4829DB2713FBDEAD3CEE70BB
+:10E68000BF95EC94A83DD9AAB0F9B76A24B082F638
+:10E690006B2D66F57BAA48C002F3D7A814CFD0ED46
+:10E6A0007337EFFB4A2A89EE9793D11AEED7C87CCD
+:10E6B0009F3DB2EFED7897E0BE3E87D7CA848F3199
+:10E6C0008F36B9B94F02FE1AD2DCD70BF3BBFF1657
+:10E6D0009B1ACB1FEABDE58B2CE09B4D377E910545
+:10E6E000CCBE29923FD3E7D0E7CFE472B86C6ACEB4
+:10E6F000C7FC854DF52E2F87B3C5D48EF90C9FD757
+:10E70000F3FB0988827ED1307714AE01913F22431A
+:10E71000DE1D5DFF88E8F9D3FF34BF6653F37296C0
+:10E720005F934D787ECD4CF427051E364139AEFF00
+:10E73000B9DEEF3ABFE6947935A63C0703FD42DD2A
+:10E740006FA66F15F112C7E95BBA99E5456499E8C0
+:10E7500046E45D08BA14F919225F43E46FD8785E85
+:10E7600007FD2CCF6B8E4D5FB63DC403E7DE644BD7
+:10E77000BC774BDEA9F3089A3DF95C392C1BC7C660
+:10E7800065F903FF334AFB85A72C3A6E9E47BB51C0
+:10E790005F17E556F875321DC21BAE027BB5A85C4B
+:10E7A0006B85F37C29A504CFE994964B58161D621E
+:10E7B000F5DB3C327EAFCDC3E24DA27EB1A63D0774
+:10E7C000EF2799DEBB38F29E15FBFDDE63E1A5C2A3
+:10E7D000E6CDF3906772FA5E3D5966F9D155129312
+:10E7E0001BB0A13A89EB430ABF8B89FB92025DDC27
+:10E7F000F5C71C5BB7B7B0FC3E910FFDB79765CC72
+:10E80000877696FBA6C1D9B3B2502808FBEBA5DBEF
+:10E81000883B4585F98535E0C7153977EF817C88D8
+:10E82000272E647BB6171F62F6C28FCBAFC6FB469E
+:10E830005C5FCB188F754F49F406E0433556A6FF51
+:10E84000453E74B9D15EA835D90B179FE2FE8F14EF
+:10E85000D2E7073DF988C7148FE5F7800C24BFA3E2
+:10E86000F78030F950CAC77496BB1D10BF2E3A64AA
+:10E87000C1E39EF2364DC6F3B19D2CCFE389906F74
+:10E88000D0F3A82F723886B89CF81BCF93ECE172B6
+:10E89000E2752E270E839CA0E52B3C4FF210CF9300
+:10E8A000349F97D8D152FD92DEDE319745927F1684
+:10E8B000E6416D56089EBF1BE0BE8FA2001DC790AB
+:10E8C000C7B802E9676FF2DD15401CEB350BDA952E
+:10E8D0005D5348562CFFAEEBC2CA41F30F3B5BE6DB
+:10E8E000BCD43688DFE8B4517F26D6FB1E71AEABB0
+:10E8F0000BCF5BA4955B08E45565D9FBD8FE43AF0D
+:10E9000003E97988D78EFBFB649E93BCABCB53B9EC
+:10E91000DDD7350BE6FFE03605CFE7887113BD7410
+:10E920003E3A3A499BB22713E6DF39359809F64C4F
+:10E93000D7F87D1B0B205FE4A04C800CCCF3B21603
+:10E94000717F96AF2B4DD1A45879EA03ADEB038FBD
+:10E9500064B867C20CFF01ED0EC80818FCBC95B383
+:10E960002846FEE269CC13EDDB6F765C3B1BCF4D96
+:10E970009EE6FD17099C0EB3161207FADD408F8341
+:10E98000E0D9650D21DED62EB454C73A5F5B54C47E
+:10E99000F0BDB6F453B48B4971EC7924959BE9959D
+:10E9A000CDE70E858E4FDFEB2A8D3DFEE51C6F9483
+:10E9B000AE5F0379D5556D41BB22092E62C0FC1CA8
+:10E9C0006A074948EF28973E2BB5313BC1242FFAFF
+:10E9D0007DBF54474FF9FDE5D0F9454E437CFF44D8
+:10E9E000F6ECA4600C3C8B52C051C8A1FE70247898
+:10E9F000FEB58BC39114C7E6EB28BE56887855DD6B
+:10EA000029CEEBCD2E2A8B714E6C003C98E9E18E1D
+:10EA1000853E5C1779EE35A282BE2CA5FCA88B43FF
+:10EA20000C043F33BC167EC7F032B7FFA888C74737
+:10EA30004E739DA7DD8FDA456E9D5D0C87A2155A3A
+:10EA40009FCAEB3FF64BE17BA85C9576FD09ED9EF6
+:10EA5000A9BCFC3194543FEE9282EFBE415F9E22EE
+:10EA6000A93980B4594F8F820819B9555A66B07FB9
+:10EA70003A24EFE167302ED4970AFDA6933A852118
+:10EA80003980EBFA93146E05857529D15641D94822
+:10EA9000BA6CF05E63CF9F0EC3771A7B1C4119825C
+:10EAA000933BADC7F471A36BF4E747F2E0168D6EAC
+:10EAB0005B1E9DCF921DC67DD20612C2F196761BBB
+:10EAC0009F9BCF8F4832050C5C4E10C97F9D82F909
+:10EAD000BDC4C1DAE3478BF3E87D85FAFBCCEA39A4
+:10EAE000BCEAEDCE20DC2F4402C6798A7B739EA758
+:10EAF00072CC3E01CFC33C0C74FC91DBEEB7507B73
+:10EB00003923A5AE11E07115516DAC647683589729
+:10EB1000B887668173B60DE0BBA0DDBC0ECD06F3F1
+:10EB2000F959D7E0EB1378FF4711C175DC5EA46299
+:10EB3000B934BE66BF06CDA5A15CFD7D104D5C3F1E
+:10EB40009065A906FE7D51D023D1E4D3597F7FB8CB
+:10EB500016609C4CC075603A35C6C976C121D77421
+:10EB600084DFCB7AF811A5AE04C615EBF96759E836
+:10EB70008120ECAB26B27BA0DE4DA97B03FAE71C1B
+:10EB80000EBF2FD1A913A75A08EBFC78E747AFC8EF
+:10EB9000F9D1F51112BE1BF2A3EB77CAEE0E58CFD6
+:10EBA000CEE70E03BD0FB42E911F4BE901E146E7FE
+:10EBB000F521E837F3BC8EDE407E0A76C974B9D8F9
+:10EBC00010477986C3F19E62DFC7F05EE94BD92E0C
+:10EBD000BC7F27BF7BDF503A8FBEEB25CCAB4D937C
+:10EBE0004915C04FE4237CEA54D0CF4E4BF0CB2ED6
+:10EBF0005AEFBB8A78B7C034BCCBBC402A724EB146
+:10EC0000B783D24DC6F5B20FE4C9DFAF5B90BC80CD
+:10EC10009619890B9347D0F28238E277D0F13224EB
+:10EC20008BAF1B8350F3932FA1F3FC491C9D27ADA1
+:10EC3000E7DD90101C41F9ED8F3662077A4D4BA845
+:10EC40005B371DBE932CE37C8E503B51A172ACE22E
+:10EC5000F2CF26DAE9F7867EED9C00F3C96A9E467C
+:10EC6000DEA5A03C5CC4F8E4E8C35F4E8473E0F228
+:10EC7000374E2F9E33E7F4973682C1C38CEFDD1CED
+:10EC80001E6FC6337FA731DD762BC4DB3FE6FE0F58
+:10EC9000D13CE82F5CC7FD8537E3991FF466A18856
+:10ECA0002F05D3F5F66DA3434BBA0C9C076A274199
+:10ECB000BEF3676E2D2919FA111FF2ED75DC6FFE98
+:10ECC00098906AA0F3EBD64C1B9242DF4F6F6570B1
+:10ECD00030CF6FEC68A69F1B4E5282D6C5CF1A94D8
+:10ECE000A00DE477C3499BE1F9DFA91DEDD79D573E
+:10ECF000FFC98787A6C3FCAE24E155D0FFCAEB123B
+:10ED000058E09EF36B0F9FC74070694C568842E1F4
+:10ED1000D12811DF60FD9EF9B71C13BEB34733FB4A
+:10ED2000257D5AECF55DC4D7376D75CD2F81CE1A90
+:10ED30004356B4E5AFFB43C590C1ECE7C693E791FA
+:10ED4000802EFED7A884111E8D27CFC7E7D3561F6C
+:10ED5000B301DDC3382A7D7E9D431B02F1DA81E0D9
+:10ED6000BC9BDB418D2793893F55FF9CF17774FC59
+:10ED7000346CFF2D87DB6FF75BAA63E577358F6611
+:10ED800070199DAEF8201F684C90689B637C57F407
+:10ED9000CB4831EE5F98E7D55319BE12E67D4E158C
+:10EDA000D1627D6F3187A3986F4F4A78910FE9B395
+:10EDB000AF10EE9988D4DD7DB9FA7B24B672FCF5EC
+:10EDC000FC309C0BE37F7C61EC733B02CF9394653A
+:10EDD000682FBF9052F734C8B77997D10AA58F2111
+:10EDE000F38216763EC53F28BEA370964960E26066
+:10EDF00070B661BB18EFA317393F523F1CF2D4AF76
+:10EE0000E2F2FFAA6D4B30EF49C8A98F36CA28A796
+:10EE10003E42DD42CB8084F6EBFC3A0A6B2A571661
+:10EE20006D9FB60FD4C15599D4064D61CF6F86B290
+:10EE3000CD6A88F78BEF2D38CCECB7859D463D57D2
+:10EE40004F3A3F01FBE0A317993CA0FC6D0379BC4E
+:10EE5000E82EE338F5DB2EFA00E6576FF2CB33B835
+:10EE60007E36DB799B47F3F8FE2432E94CFCF24610
+:10EE7000A2ED188D7AC127C33CCA14E33D5BA24CB6
+:10EE80002F61F05FBEFD84CDA50E3CEE112A470A2E
+:10EE9000E8B8C7A83F0EE51F476BBF1F4DF170FCD8
+:10EEA0002083CB81D1754FC1F78E1F64EBFFB4E196
+:10EEB000D345704F0C99C3EC8638387C407F8D9BCE
+:10EEC0006B0FB4D2F5AEA662CA01E782E2983D228A
+:10EED000EC3059BE5676D1F6C9FF58980CEB4C7BF6
+:10EEE000E807D5305EFA43091AC0ADA3421B0FF202
+:10EEF000BEA3D6E985F32A9B291996D3F7ED741C96
+:10EF0000D02781DF4EDE03DB9105DDEB2AE1DE1742
+:10EF1000F7AEDEE030BAAE760BBB27A3FD7CE26D28
+:10EF200025D1EF35EDAA7D0CE6953B9BEA0709CE8E
+:10EF3000D16BE3DDBAF109B7AF1A394E8E3F3BEA28
+:10EF40008EF3E05CC27E19CDC74F1BF2D1AF1F4DCF
+:10EF5000183D89FC7BF836D891027EC7A8BE22BA3C
+:10EF60003CB5D1DD52D04AD7B5B4E731BC8FA361EF
+:10EF70006530632EE8DB0715A647F9FCD2FE9855ED
+:10EF8000A9BAA2FA77AEE4463B52D8C99713F15317
+:10EF90008CF1C2399C0F2EE7F6F1DC0406E7F9C4C8
+:10EFA0009B0BEF5D61272E0B85D9DC69DD65CB40BE
+:10EFB000EF2EB126837D036B898577519AED20C1B1
+:10EFC000878D0F24FA21EEFAB1D45708831CB13291
+:10EFD0003EEB7B362EB025AFFF38D631CCAF6F2C51
+:10EFE000E4765D01D1E0FC40E3EE51781E2C2E9ECC
+:10EFF000E27102CA3F3BE0F579D0FF74DDD73CE314
+:10F0000008E2B930715F999BF813E9779A760FD9C6
+:10F01000027646DA086DFC723ADEC7D6702ECA0B4D
+:10F020002ADF24AA5B73C7ACB944A17CD53894DA33
+:10F030005DB47ED14377B37A7E789185D6AF7DE893
+:10F04000D14B144A9F8DA3C3EF43FD96879E66F56F
+:10F0500009E14532AD6F7C683FEB0F7BD894B0B6C9
+:10F060003F74E012F0FF8F2433FB8178C35702FD19
+:10F07000343E3DCAD2A15BEFBA314C3E1E71B07E28
+:10F0800047F2C84F6701BC3DE1C259BA7DB9EBC731
+:10F09000083B96D971629DE23D92197BFCB1639861
+:10F0A0001EBD661AEB7741026977B0F3757EB0C773
+:10F0B000F6EE1A8570491993C2E145C7298D8E2352
+:10F0C000E028C613DF5D0C7A1DE4BE95CA7D9D9CC9
+:10F0D0003997E38D7EA70DBF53AC8D877BAC1A6744
+:10F0E000658F07BC517C291C5F8A1D2F57DBCCE63E
+:10F0F00047C74D2E413D3311E2CA7BBFA6FDF3A2A7
+:10F10000F336D3C78C314C1E5DD3CACEF7F7258FAB
+:10F11000403ABA2081D98BA494C28FCAB38D1C6E99
+:10F12000EBC624333F32828721128EDFCAE197CDAE
+:10F13000FA9FE97AE7F0799CEDF5EAF0A4417C6565
+:10F14000EFCE22C4D3C6081DAC338C736485E9BDF1
+:10F1500072CA78308F9411F8DE6A07B1E373B22572
+:10F16000F25E1E7DEF82697D13811F96727B98F897
+:10F17000CFC7BC86062E2D96B6876C10975EDACD6B
+:10F18000E2E4A480AE0FE863564D295F9F9BAFCFAA
+:10F19000CDD61730D02739D4973B3BB13FDD46E081
+:10F1A0001E19AF78021FCFC0CFB1C603BE18081F0B
+:10F1B0001D671B1F629E267846E06C9A9F8027F091
+:10F1C00031BE576CE42731CF5BC644E2B1467ECEF8
+:10F1D000FB96DFAB60EF2DBD91E211EC1FD548CF60
+:10F1E0004B7BF22CF38BA3EFB577AFF0819C4F9064
+:10F1F000541607EFA9F583FE6BDA558171AAA54F66
+:10F200003DFCA49FBEBFF8D10D2E48AEFA48E9CA16
+:10F21000003BB861FB2A17DC33F7A1E27781FCFCE5
+:10F220002820C7CC5B7F9BCB01617735727D73E46F
+:10F23000B7B7CD04787CB1DD8AE70C9B76C405E3D3
+:10F24000306E720DDA63B4FE36ABAFFE04FCD8A6A6
+:10F250009D46FB69F16F3664A8484FFE6116DC04D9
+:10F260000B0E83CDB0C66D56DC4F693C247BE9673D
+:10F270004813E9BB15E6677E1FE67192E2BDA95B04
+:10F28000BE0AF2FBCCED5492A03DD6D4731BDA69D2
+:10F290004D3D177E00764593299FA27E003BECC52D
+:10F2A00031DC0EE3F7A40BF890403ADA37AD0FFEED
+:10F2B000B2E46D3AAF63DBFEE2928AF57A7325E23F
+:10F2C000E9D3EE059B9E5607D6AF1F837D10A77F1F
+:10F2D0008FE157DD29B18DA15DAC6CB0065D101FCB
+:10F2E00068D86CF5520D4C1A1EDEFAC0AFC1BF7C57
+:10F2F0002DCE0BA9A64B1E7EFE9573697DC963D6E4
+:10F30000B41A367D27EC730B3C41CE06D829022F68
+:10F310008B7FFFBC0DE290F01CEC5E819F258FF58A
+:10F32000DAE09C9F198ED3BA7B6D980F6BC653F7AA
+:10F33000DB33C004697DF04B1BD0F747BB25BCF71E
+:10F34000DEFC7EFDE6E75D40870027F04305BE2238
+:10F35000F8EB87B7E0CCA74BB11FC6434E85BFC7BC
+:10F3600001476548E78F3C0D7194D7E3BC0087FAED
+:10F3700047AE75C17A3E5096317ABF6F5506DC971D
+:10F38000576FF567B8B164CFEBEFBF1EE9F0EA83C2
+:10F39000D767B07B24B42C768FA63F0BD6F9B37B0E
+:10F3A0002FC1752E22754887F5F7B1F8C6E70AA96F
+:10F3B0007E2C06BFCC2D66FCF2C19638480E221F6B
+:10F3C000C03E02EC9BBC28E3B9FB7EF72291E558D6
+:10F3D000FF9CC717C61547EEEDB3837DD7C47B35B9
+:10F3E0006D5B1D023C1DC9D186403C9FC2C1CFE16F
+:10F3F00026C1BDEFF2C1E943189E880AFB21F81E21
+:10F40000B5C7A7C173E81FB26A8E12C37BFC7E1B0F
+:10F41000F67D11DFA0F38E87FDF40F32585E9E79E2
+:10F420007D1DC5421E9010D1D3D940FCBF6D0DD2B9
+:10F43000D7678718FF34066AABB13D640D0E81F6BD
+:10F4400040EF6C09E5439C61FF3C421FDBAC9CBF75
+:10F450008DED749E8AA487EF6E09EFD314F4B2E8A1
+:10F46000AE38C37E7D947E8CF745097E157ED6D559
+:10F470005C1E98D76D960F97169BFE8EC2BDE9A7AE
+:10F4800015FF6EB0061EF835F033E55FBF0AFC6C61
+:10F49000C5F8C0D1DF3DF7CA1594EE8F760B3E3626
+:10F4A000CA5B331FD73F5E4662F1F151A797C4E4B0
+:10F4B00063FA3C261F3BD9B9E9FF57F2F6EA01E4AB
+:10F4C000ADBFD8286F3F27C549E711D0334BF0BEF9
+:10F4D00057337C85DF6B96A399C56A4C394A7F0EFA
+:10F4E000111D3C051C057D2E7E68297E2742C782A2
+:10F4F0004E051D47E8D4BC6E233CCDED5530775DFD
+:10F50000FE837525F563C0CE7D560E6CA1533B4E30
+:10F51000E7722B85FFF1DFE561BED12AEE071C778C
+:10F52000F7B9207F6C15F73BFA202E99147DDEE7A2
+:10F5300060F6D2715F9F2B596737BDBD4B76819DB9
+:10F54000170E90EA58F1242AB1711E6132503BDB4C
+:10F55000173BCEE3A1C779BC73BAECCC6D8638708B
+:10F5600017BBD77FE18ACB5CB02F707CD7883B80FC
+:10F57000FF7EF66799DDEBE9D714C89358C0404089
+:10F580003E24FEBBA7D0752ED8B504F31BCC7194D6
+:10F5900045CE6DB8BFF039B9194B73FC6431C4590D
+:10F5A00080DEEF353DDF7511D2D762137DD5017D49
+:10F5B00065F5A7AF1704BF8E27E3F5E7CF9673B9BC
+:10F5C000375D2EBE03EC99E3D4CFC75C02B9F800D7
+:10F5D000E8DDCFC1EF07C6F0A723DD2EA9FBD0C61B
+:10F5E000EF71467A177468F6F7CDE5B127FE3EE96C
+:10F5F00026DAA5E1C9374AEEA1E5B1275F2B7C06E3
+:10F60000EA4FBD9AFB06E9DF7FDAEEAFD0BF39BE25
+:10F610003B0EE7737CF79F726F82FAD37198877500
+:10F620007C651CE645F9772706E03CDFF11C16B740
+:10F630006B7DF6CB12CCBF206D88C793C536668F25
+:10F64000ECFA9FB7207FFAD35D712AC4299A7627F6
+:10F65000A0DFDEF4B403F35E8E3FFBE5247D9CE97E
+:10F660003F5D4FA38DC5338F2792398F033D2733DD
+:10F67000FFAEE999C95B215F6E694FAF0DF607A632
+:10F68000FDF15F2520978E3FCEEC0FEACFDF0F37DD
+:10F690001DCA639BEEB652787F0C3622F5C3378DB8
+:10F6A000EDBE14FCF0FE706170384EE100EBA2700C
+:10F6B000A907793A103C868EB521FD7FFFE0F1095C
+:10F6C000FA170DBBCE413E8AC245D2D8F3C4805D45
+:10F6D000C2F5B3E7BBBF2C017BEA68F70AB40B4E57
+:10F6E000B5EEC963BFAF74F06DD72D054F67DD73FD
+:10F6F000BEB7F866F4FF16D757663EE84FE74FDD12
+:10F7000080F54712BD38DFD3E4FFE6FFDFF0FEB837
+:10F7100084FBF2A7C2FB2FFFD7E2FDCF1CEF896E5F
+:10F72000C82F3BFEECBF72896EFDA75AF793FF4BC3
+:10F73000D71DB18F649F1DAEB8EF24C1109C5F5FD1
+:10F7400035809DF2EE5849E4EFA01F22F277E4B431
+:10F75000C56867C8691D6837AC22EC1E64BF6AE1E2
+:10F76000F7B1B1BCEFF66C6F00E3A28AAF7E33ADA8
+:10F770005B8737783B7004A37F2667D454439CA5EE
+:10F7800075059D171DA735DDE26E55E19A764B3064
+:10F79000AE04CBB7A15C9DF1C3FDF05DC569BCAF04
+:10F7A000D669F237E20B6CC6BC62B2C70DFBD50E50
+:10F7B000AF0277B95353D678BF6DEF58B6AF1D4F30
+:10F7C0000298B779A6704A2D191C4E66F808B8F54C
+:10F7D0008313F747C57DFC4A5A4708F85021D49F48
+:10F7E00064EB413F14FE8E14ECD7589316793BD846
+:10F7F0007E8A1AB9C71FF220B8BF19B96756B5A0DB
+:10F800005F2AE0AC1B0FD76F86F399C257E0C54162
+:10F8100066219E1DD94E6F80CE7F95CAE0BE8AC2FA
+:10F820001DEE1717F0157033E3E17DA0519D1D1FEC
+:10F830002D8DF93AFE4AE2817D96E9F294B01FECF3
+:10F84000E5F204B4978F49242851FFED5845462529
+:10F85000F815C7726C0A9453FBE89A74F3BDE0A4E0
+:10F860003DF237F4A05E41920DF5633985F8FE3420
+:10F870007B96E1BD0390B74DFDF66359E576DC0F4D
+:10F8800075E719DE9B99E0DA02ED07208F1BBF3F79
+:10F8900003FD9B1F641619C699F9CEB17BAFA2E593
+:10F8A0004EEE57F74DB5623CFED89FE755021C2F30
+:10F8B00054C71BFA1F24EE74202ABABE2A58DF450B
+:10F8C0009EC986EF36BCBDA710E2103FF256189EC7
+:10F8D0005F5C7EA1611C9F3D1C04F2AED56A0DCF1A
+:10F8E0001B9ABF204A2A21E7357F4D9489D47C0F8B
+:10F8F000761BC699B87FA7A1BF37E49E0626E3848E
+:10F90000C3DEE7A014F9ECB654BBDF42CBB16F57AE
+:10F91000CAB0EF59F65E5D2B84A1CF3B463C400751
+:10F92000E79078DC0F1C28EFFD4B4BA00ED6F90BAF
+:10F9300039E081327ED8A21258D747999D326C4B5C
+:10F94000DF23D55D5E0276D6678156A85FF075B776
+:10F950000CFE64EB0E19CFD74D976B12FE0AF2B86E
+:10F960005BC21CFF06A705E3F04753BA4BAED5D1E7
+:10F970009DC8DB31F371D1C48A25307E5BA6D6D514
+:10F980000BF2B4F2EF57CA31CEBB12B7F15EBAA296
+:10F9900089BEDB619F5EE425C54F935972FB0FACB6
+:10F9A000182FB9D5E27570A1807AD73DC3BA19F87E
+:10F9B000DD3A8EC98DF8BF1015E241F1A975329C70
+:10F9C000B323774898D722BEB7A09CE5DBDF5E2241
+:10F9D000EE3771A7FF642CBC9FC8F205209606EF96
+:10F9E000D558D04E711DF6EE83FBC8EEF41C728321
+:10F9F00078E8A979C70FFB223D874353258A9721D1
+:10FA00009D15270A587F02F1CD1E4F55C258D46F5D
+:10FA1000E59887B39CE7CFF44EFD8D07F4C7F2A2BB
+:10FA2000D14306CB2F779D9488AACB33B08E5371E8
+:10FA30005E2E258CE7C55C27156C27E1F1CC1FE411
+:10FA4000E3BBE6A9AF5E0BF3D86FC57C67A2684B3A
+:10FA5000601D1DA3DF543B701D84FF5D9130FEDDF2
+:10FA60003CC84FC20BD19470E64F629CC33BB2A31B
+:10FA70002C19FCF2D40A2F9E1B4C7D588E9C9B05A2
+:10FA800038DC0EFFC373B597BE5A45C7DD01B2928D
+:10FA9000B50709A5EF0E9B68A7A2C6C3EF3DC4F644
+:10FAA0004B2F831843BC6CEC3F2E3FD25FB36746AD
+:10FAB000C7FF43C9A5AFB6C584671CEAEB8E1956CC
+:10FAC000CC9F38355C134E01571783EBD7542B640A
+:10FAD00044E38BEF496A2ED0DB9D705C80FAD1BF86
+:10FAE0004CAE0B96A4C3FC8363E1F97C9736642A81
+:10FAF000A5BF1E9B967B23C6491C98FF55FBF3A30D
+:10FB00001BE1C8986BE6114F1BD08DA2254C8038A5
+:10FB100095FB0B940B22CF2D0A474ACFF49BB75B82
+:10FB2000A2759013AE285C35B82BB84307673BAD80
+:10FB3000D772B8FECF23F597B5017E17DA912EAEB6
+:10FB4000E53CD5964CBA20CFEE84FB814B811E4E0E
+:10FB5000ECB062326B0F34821EF5D8D9DFF5490B59
+:10FB600067C2DF71197BD082F1BD37297D68401FE4
+:10FB7000C1F1087731DE8929AFA6C0F98913694A36
+:10FB80000AC06771D88670FB894282707F6A4FDA3B
+:10FB9000C26915C81F2AB677F371264FD4FE518269
+:10FBA0007A9D9FFFD5CE95E1BED481F065DECF87EB
+:10FBB000F8F0B92903D3415B851DEF1F6A2A5F5115
+:10FBC0000C7A62797221E663355549A8879B9A3F82
+:10FBD00043B88BF1959332517579533D104D4CD705
+:10FBE000DD237FD286ED0DCD27509ED3E9E401DFE2
+:10FBF0001CE3FB9D5D56F2D35A5A36FC5BFE69ADA1
+:10FC000013F72DDB419F34903DB6E53A7948BA3F72
+:10FC100089C8FF71147777D6BC180F72B656725F19
+:10FC200002970ECCEADE7B19ECE7D73ADC97C0FEF0
+:10FC30007F8EF71156CF715F02FBFD631F4D9A0354
+:10FC4000FBFBB559EE0DF09741AFF016CDC1F63C78
+:10FC5000F7CB509F316E06AB27323A4879347F8E0E
+:10FC60001FF5B913E1F2697B4260B07B48AE6E7E4E
+:10FC7000C600977EEDB284795198B841E9E79F6B51
+:10FC800086B17B710B4298A735721C8BAF67A4B00D
+:10FC90003FC92BF277D346100DF657D39E72B07B37
+:10FCA0005BDF0BE502FCAE7ECA1184B8E4D2FB9E9A
+:10FCB000B3813E9A2FAB85C057B3CBEAC68C2B835A
+:10FCC000F84908EB5737EFC679754C70F3FB72FBB8
+:10FCD0008A217E55CFF39EEB4DF9BF8B9D7B311E64
+:10FCE000B7789B31EEB68484DF023E6DF8DDE079B3
+:10FCF000BFEF58D83C140E8FF972E84A1B9BD7F916
+:10FD0000E3E8F797A6F462DEB1E20E65D4217C1B2E
+:10FD10003CE8AF64C6E3B99A5B87BE5E12EBBE985F
+:10FD2000EE16AAFF29CB3DDEB2134BE77882EB1922
+:10FD3000A2846D5E3A4E2397CB9342EFD8F4F983B9
+:10FD400073395C9376B2FD6F735EEC5CD05700172D
+:10FD5000BECFBC74D60B53002F029F1724906ECCDD
+:10FD60005F4D215E8E172FE045C03FBADF4CDFCBE1
+:10FD70008B451702FE84E5DBC53379D1F78403EDAB
+:10FD80002BF3FCAFE3FA57ACA39DD7079A7F3BD781
+:10FD9000B7677BFEED5CAE9BD721F8583C177C6CB7
+:10FDA0005EB798F799D359C8763A7426E44C23A9DC
+:10FDB000F3605C96CB150167314F01AF9E01F25D98
+:10FDC00095E63F18D6A3842AF1B0FC7650A420C74C
+:10FDD000BA2FC4942BA57917F63BD3F508793BD0FD
+:10FDE000BA849C35AF4FC85BB14E2177C57AA75214
+:10FDF0004182F210EE7E90C07FA833D8C3157062A6
+:10FE000041BF0F64FFB9A13EDD7DA3A1FF0F3257B3
+:10FE100018DA2F54D718DA2FF2AC33D47FE4FD95DB
+:10FE2000C9AEDF6C68AFD51E34B44F0987A681DD3B
+:10FE3000FDB7966ACCE73EFFC3BEE7A01E6C7163B8
+:10FE40007D4F4B26967B5B54E4EF7D2D1E2CF7B740
+:10FE500078F1F97FB59463F9428B8665A8C587A5CB
+:10FE6000592ECCFCFD650AD8EDE5A12EF407C68F0E
+:10FE7000AFFB0CE4E1014BA03591C2E99C37997DC1
+:10FE80004E02667DFCE55B37815E77B37BE8DA7A0C
+:10FE9000274B6A0C7BCE45F59DA6A317574D98C0FE
+:10FEA000FEB28BC4CEBBFC6A1CCBF7C17C3D4A9B27
+:10FEB00073ECEC5EDB397324CC4F9C43D879055A44
+:10FEC00006EB68FB4C85F841FFD73A15DC8F22FC26
+:10FED000FCF0256C9A70BFBA3F0EF4775A2A9E57F1
+:10FEE0009A0D0FE97C654DC6BCD64BCAFF82F980DE
+:10FEF0005738D9DFCDBA7CFFCA7FDE44DB499BBFD0
+:10FF00008C9D8710F786BC6E3913BBE12B386300DC
+:10FF100079A09297FDDD9464C5ABF70744F9D771DA
+:10FF2000CC1F98D9CACF0B1C2468C7097EA4EB6BE1
+:10FF300087F90BBEA8752BC1512ED0F7EBA641FF58
+:10FF4000FF0B270420E00080000000001F8B08004A
+:10FF500000000000000BB55A0B74146596BED5D591
+:10FF6000AF904EE88400411E76886020AF4E271D7A
+:10FF7000C26B28124054C446650714A540313C9317
+:10FF800018981547F774633308AC6737337A5C5DAC
+:10FF9000C1D3E0A0ECACE7102171339A300D2A8F69
+:10FFA0005947A3828266B141E4B126742428E270E5
+:10FFB0008E7BEFFDABE8AE4E02E859939373F35797
+:10FFC000FDF5FFFF7DDFFB552D3FE4720701A0BA71
+:10FFD0006C4D1E14209D221DB7215DBEFA3B30F7EB
+:10FFE000C3F1EA0B602E06982ABF164C2D01387F0C
+:10FFF00004DC369C3FA65D3DB3CB85FF5CFE5182A1
+:020000021000EC
+:100000000100ABECF83F8ECB3AEB2AFAE2BF45E1B8
+:100010007A30D335FCF911FF8A0F34813927361E27
+:10002000F77DFDDB346FB75F05B305A0D93F876966
+:10003000D8BF18CC2300F6FA6B78FC8E7F358FF78B
+:10004000F9034C0FF8D733FDABBF8EEFBFE77F9EB0
+:10005000C7EFFB434C5BFDDBF97A83DB09D01FE084
+:10006000426BC540350F8F46632F6E689F9CE94BEE
+:10007000416A16740E1DC883D40E968C0CA473248A
+:1000800096075E0F403AD3B08AF79767BEC5F2C0B5
+:100090001F9F1DF99D0DDA4F463F339402DC03820A
+:1000A000FFD965FF7D494AA5819A23A1BCEECDEC1D
+:1000B000031B2580FB2090BF00E99CCA3ACB7889BE
+:1000C000EE4F719E42794881CF4C3FE6A24CE867E3
+:1000D00052778A078553BADC6480A58EB556180E10
+:1000E00080523A1141F99A40821FB3009640D80AD3
+:1000F00074FF8F96139138392F03C8826C3CFF6BC5
+:10010000169EAF5F077A3E6E5DB94286B274929BCF
+:100110008BE5B60222BC9E4D7EC45DE3A0FDEAAC39
+:10012000B44EE2BE4B1DEF5871D0C3BEADFCFCB562
+:10013000F6D5F55405B080E6AFCD54EAF6E0BA2B1B
+:10014000FAB43D209B7A9087D3DC79653D94C3BF98
+:100150008C127A9553A6D85507D9A9034CA8C7681D
+:10016000480ED9709DC55975A9B42E1A662AE0F5B6
+:10017000252D32EB03CC8A7910EAAD52D35B3B8458
+:100180003F21BD544EA89C01A8BFC59B8CFC2C757B
+:100190009C64B97F0BCD3DF25B054F7F23A776E7CB
+:1001A000B76AC22DA769BD2A4D6E7C1DCFB5BA4D69
+:1001B000DAF14EDCBC95EE948C53C9E4583086E4F9
+:1001C000827CB8C3E46F8764F6B7DEECE39C1FD88B
+:1001D000DE2FFA61C73B68FFE72EE3851B009E70A8
+:1001E0004F7B3E30E197D35BBF62DF0637F913DA0E
+:1001F00009F991AEC775684380E75E576E0F0550E9
+:100200009E51AFD34CFB47A5503095F47209DC6B7F
+:1002100050DE939BF71F213F996C7784496EC84449
+:100220007BBC5E27B58BCB134F868229387F7C5BE6
+:100230004026B71D7B480D3A703CE63D05358D7173
+:10024000E61D9F4C7ADFE96F6239D4FBEB99C6FC5F
+:10025000E726F6331884D7B2AFDFCFE021BB89E2BF
+:10026000DA4AED4CC134A83361C0EA724C93539022
+:100270008FAE30B8E97AD1215790CE55DCA6C8A907
+:10028000782EEF493548E75E876A506C1427037271
+:100290005FBC6E3343D88671C4966902254EAE6347
+:1002A0002F84821407F5B8D69C24EC79D2E57A998C
+:1002B000E296D3AA6EDF82F2843793DCDB5CDDCF7B
+:1002C000FD96DBC472FF32DDF7961B29385C237D77
+:1002D000F9643FEDAFBC48F6D390ECB6E173897199
+:1002E0005A8F8BFA3ABADC7439563BBB38EE2F5F23
+:1002F000DDC5712F71DF6A13A8F528774F85ABB87C
+:1003000016D7695F03F367E1B8CE8234AFFBFC8F89
+:100310003CE5EF93BD4C9527B42A742EA7E9AA7645
+:100320005DBDFA1BDEBFD7FBDAFED52D5EE7424787
+:10033000ECBAA34812711ECCCE53F6983EAF57EFDD
+:10034000133BE718F2D6A4EF5543DE9A8C9136FEA4
+:100350007E85FD11C378AAF331C3FC5B32D718EE5A
+:10036000DFEADA60B87F7BCEEF0DE33BDC2F18E6E7
+:10037000DF59B6C5707F96F21F86FB33655024F4B3
+:10038000B97C2964213F9B0BF54CE7412BD307A097
+:1003900093A98A96447421B8993E043EA62B3CAAA0
+:1003A0005C847613B5740E20BFEF78E3EF796417A1
+:1003B0001DBF1AEFCC72C5F2B29EA77F6A3EEE63F4
+:1003C000453DF5600F038A84DDEAF1BE57FD24C484
+:1003D000FB6811C6133C67B43199E34C34A54F4810
+:1003E0009262F1042DD244F958F75B3DBE14CF73ED
+:1003F0007FB092FCE83D1946B8BAC79BA9662C0DA0
+:100400003C74DD9D737F7E6CFFA00916939D6D4744
+:10041000FA3AF2D1775EC4EC8AE3A780F8407B9B7E
+:100420003C770A44F0FA4C272821CA4376C848A2F0
+:100430005878B92B6F36068899DFA3A2D09E7F48E3
+:10044000570A49DE81A726A49DCAD5E2D28DA8BF4E
+:10045000E326E6079648A111288FA60631CE5F94C1
+:10046000C6FCDD0761D6E3FD10B110FFF301384E85
+:100470002F0017D30741617DE2CAC905189F1635C1
+:10048000983D1B91CFC2F4CEE1E49FF9638FA64B58
+:10049000782E2CED14E2A7D004EBA9BED1F9A8D593
+:1004A000F8D858A454D0F90AD35B373E83FB77368B
+:1004B0009A602BAE737AEC630F435C3EDEEE299FAD
+:1004C0004EF37648A0505E0DB4D842DBB268FFCE42
+:1004D00001940FF4792B3C15338B70DDD945C0FAAC
+:1004E00086D6BF00E9679653C81EA6F46719E07365
+:1004F000C37CF93DF967809F2B2459DE00E2421945
+:10050000EFCBE3875F7F6DCEDA3CE6274075DC7684
+:100510008F3A9FCF6FC55840E7DF6C0B6DE57AAB24
+:10052000669884E7AC7CC966A2FC7F14E333DC0CDC
+:10053000F0B9DFCEF47FFC4EA65FF833991EF7BB0F
+:10054000987EE9CF61BAE87B6400F577BA48A922C2
+:100550007E7AE3A3F73823F8884A30A7DED1FD7E00
+:10056000A5E60F050D279F4C263B6892DD64A7F991
+:100570008D689878EE73CD63427256BC5CD5C7899E
+:10058000CF82A68FFF30BE849E333B259C7FAEA9D1
+:100590006B00F96FE2F9AEC8A3C52AE4A19D7747C5
+:1005A0005AEB467A7E47E3703A21C611107648FA34
+:1005B000947AE2630DDBC9AF8A44BEBFD3D659E259
+:1005C00074C4F8032A3130CFD46A7966AA7C39958D
+:1005D000FC6216AD3B96ECFAA60F68BFC001E1873E
+:1005E000A8D7F9BE387FDAA5C941A7F92D561FF95A
+:1005F000D38E964FEEBA1DE53073DCAD5ED9159BF8
+:10060000FF3209C14BF67DE9DF9FC9E0F94EDA6A96
+:100610002E6C99EAC479F7D9F7BC4B22B8DF797C04
+:100620006A1A8EE7674AFB882E70654D4BA7380023
+:10063000217EFEC19CC9FBC8C466B86759A99E98B3
+:100640004C4E1517772BEC186F0C71BE9F617C4BCD
+:10065000E660C3FC5B5DD986FBB7E7E41AEEEBFB13
+:10066000CE70171BE691BF52BD8D7CB0DE619B1C26
+:100670001A21911D5CF86C19F33FB784F88FA2FC26
+:10068000AC58389C29DBF0DC3314361AF7A6927F7D
+:1006900026D6B5CB5B5EDEA7B87AAF6BABC0D737DB
+:1006A0002CF55ECFF6560F5E6F5D8B71E40F14472D
+:1006B0000ADFB8C719C473EC187BE90617F2F761B3
+:1006C00051CFF56E54AB7713EDE88ABD4A2E613FEA
+:1006D0000765A07A48AF7B13ED08E049AD0E10F432
+:1006E000A7FAFBCC8F44DEFA8AFCBE5FBC7D6B347C
+:1006F0005464C8338556CC2FA89FCEBFC9B0952E61
+:100700005CC673E87AC88ED93F3CB4E5DD41257CF0
+:100710003D40756D15E5055C3FD923897597EF79E7
+:10072000775046EC3EAC3A6E980F4F48FB0CE3B561
+:1007300059C6F1D393F7C53FDF5B3CAADCF488557B
+:10074000C5385DF9ACC4F92AF1BE7E9EA97B93142D
+:100750008A9BE6661BF753554E051407554D98477F
+:100760007AC8EB7A7C982B434D4F716E80B6EE8C35
+:10077000BD4920FF8C758FA2ADD07902FF25F2CD47
+:10078000D1BE0AF8E2F6C9F288FAAF23ADEE9FBEF9
+:10079000C3791D7F063789BE234DC4DD8286D326EB
+:1007A00013E5BF3EC25E0A9C11533AD2E8E2E40070
+:1007B000A03F552F4909980AF1FEF0CE4FECA8FA58
+:1007C000519E412FD8516F9F994C86FC13A5988755
+:1007D00063CFCECCB9947F6EDF9B1436FD0C7E3C8C
+:1007E0005473202D2C177EFF00D98DD84701F48F2C
+:1007F000EADF81BEAF427182F8A7F132CF90A3CF7A
+:10080000E2BAD507451CC0DB8EC47EF6BEB87E16A4
+:100810003609FFB5E32FD53B55109AE620DC208C36
+:10082000FE0FBF9CFFCFF43832B8CE213FBFB9BB1B
+:100830005FEB7E5F7D58F8FDF9E66F3FA2387F1EC3
+:10084000F35FBCDFEB72D3FDBDFA7999FD52BF7E39
+:10085000AE599E1EEA41CE65BA5F296EF6D75AA7F9
+:10086000D8B776E2C5BB28CFD5B6A086A4EEFBE804
+:10087000B47ABD0CAEB87D76ECB62D0E39627C44F0
+:10088000F5FCDAF26DFAE43C41D750FE853A2DFED4
+:1008900088BA06F3AA2583F2EA2CC9BD0DC9E196F0
+:1008A00081E524BFC312845D1E5EE21E3B9EEF6E97
+:1008B000B11C5D77507D06993966DAE72E4DAF772A
+:1008C0006BF8D2EC96D92328DE7FD2B0F0B042513B
+:1008D000CE93CDFBFD1A025C1F1E4EF30D5D89E722
+:1008E0009C1914767E38ADB39DF0A8C31393A5A0D0
+:1008F000C4EBAF8DAFFF0E5B7C436B982F0D97520F
+:1009000046CB3F26FF847E598B8BA8CF8024FA3BB1
+:10091000F603F3A0A719675802A17D0AEE5BE50E66
+:10092000739DBA0C042E9058DF574DF8DA4AF9211E
+:10093000B11F9DDCB4E78854D0038E9160B7D7C255
+:100940002D12FBE0DEF0871FD27DDB3C71F8616287
+:10095000BD7EA52ED5EBAA6DC9A1AD789EB727FEA9
+:10096000DBB965385EB52DD9497DF7D9976C018A19
+:10097000CF67B7DA4212DE3F9BDED9467DC8D99DEC
+:10098000F96E5C012A4DAEFF7C8DF2FC9F2C6C173A
+:10099000006EE11F57ECF4D16314EF6AB7A548402D
+:1009A000F5B52AEEEB3DA0FC6A0AD7094B760D0A95
+:1009B000D9A4589E21FF706169716673924245FF08
+:1009C000D90377F725FCAADDF4FA30C6C3E4278EF5
+:1009D0003D86CF2D7B25C543F504E401EB6DF1D6B3
+:1009E000515BA83E7ED1A2EE27FE2B5EBD63601652
+:1009F000ADFF717F207EA2CDBB06507D14ABDB7BAB
+:100A0000AEF7CE3767F785BC989C743C71FD1FD755
+:100A1000F848EFC9928BAF9BA146194C76D1340BA5
+:100A2000685D8F2C29E4979D1B92B94E4DB4BB6332
+:100A30001ED1A72CD7F1877E60CF24FF5181E5100E
+:100A4000DD90BB7523CAE93B4FBA96AF3B47DE95B5
+:100A50001F6F9F6D556F917D6EB2312ED29E64AC2B
+:100A60001B74FABF9E34DEA7D27EC1804354ADBE54
+:100A7000641CE761BF87CF7B82AEE24790AED4E4CF
+:100A8000DF35DAD7E1C1E797D6FFFE8DF7582E9B09
+:100A9000FEF133DAF78043E031EF09F925F60395EB
+:100AA00076817B006CE1F3EAD74F6FFEB480ECF007
+:100AB0007463EE48D2E342B9F5D48BC8E7B994D653
+:100AC000638F23DD79E023D64BE27913F19B7649DE
+:100AD000627E97131F78FD1EAF4F2EEECFEECC7DBA
+:100AE000DCC28DF92CBFA9725E5FD263F46C2FFD5E
+:100AF0008A764E7D7DFD7CFAFAFA3C67B1D0D7FB51
+:100B00001AFEDE616D3D47FAED782357227CF0CA6C
+:100B1000F5F4D682B4387BF9A570F97B357CE4888E
+:100B200069CD6FAC688FEDF5CF58D4F8B8F713F1F5
+:100B3000F82BF5A0022EE700914A386F2173661C4E
+:100B40004FD4C7E40C389EA01D4FA2F3A05F4ED433
+:100B5000282C5533196FA7F590264188C7C1C96E57
+:100B600017D149928F710FBD6F98063543880F9347
+:100B70003DC238E15AC227B16E999DB6EE8E2CDC8B
+:100B80006F6D7F5847F5CC5A8BF08BC08264EEE7CF
+:100B90007439E979069C7986FCB2D6092E33AE33D6
+:100BA000C70CEB2DE962DE8D28E7C30716BE4BB8F4
+:100BB000EBA7E69AFEB4EF51C7B3F99289EABC50AD
+:100BC0000AF58C9F7DF427EFDF70EEE7A04CA4BA06
+:100BD000E29EFD768EFB89F8C42250795C0911CB28
+:100BE000057CEE8BB13F6CDB0B31BEBE18F75D238D
+:100BF000F509F7A53DE9A5E703E5904379E96252D8
+:100C00006A01F1B3DA2EE8A37D52B7123DEB74040A
+:100C10000897BD98342C44F9F445497D80EC199F20
+:100C2000E33E36702C3944F9EE5159AD621C3ACD91
+:100C30000A12CE8FF6D7E4D2012C97A8459BFF8DE0
+:100C40008BC725151EC629E1A28BE3F2F884BC539D
+:100C5000926B12FDD98F62FEC44EB321EF94146AD9
+:100C600078CEDF5D5CA74EFADE7CD5BC74B958F453
+:100C7000BB25FD4C353DD58BCF68F783109605CE4F
+:100C800023EA85F157EC4B91498F55DAB88AF21A6D
+:100C9000DA5534D51E9091DFF1CDC2CEC69BC37B11
+:100CA00088629485D5545F3461DED3CF817105327B
+:100CB00073D91EC6E9768A6BCDC379EBA41AEE63AD
+:100CC000EC54D720DD28B5F2397E059D4C152D9FBB
+:100CD00097839BE914F031453B653A1DEA98DE069F
+:100CE000F54C6740ABC8FFA3C341CE6BF08493FBC8
+:100CF000C15B2B4D547794FCBAE7FEA1518B27BD05
+:100D0000CB011DAFF4A7CB611AA0FF65F7208F219F
+:100D1000391C4712E591E8A7132122B39F5280C8DE
+:100D200026FCC0C5FE5A010A8FA75EA71CCA22AACC
+:100D300099F19B447954F46C17BB35BBA8255BEB48
+:100D40001FD35357B18BC7BABED0BF32A90E4DD4F3
+:100D5000A37EBD24B9BCCB85A1F8B35D27E79A314A
+:100D60002F951497AFCCC6717BF1B773CD98CF4A4E
+:100D7000C697EF1A8EE373BBBE13E3C2F2628B1BFE
+:100D8000BB983517E74EC1F92AF9672151F4438A18
+:100D900067AAE88F5769758CBAE6376E27FA8B3ADF
+:100DA000D4E1263EED58EC133E2A678BF78EC3A69E
+:100DB00087F75A70DE498B7A98FC77853D9CEA422A
+:100DC000F9AF5A33752085CEA7AC62BECD26705AD6
+:100DD0009D3FBC1E48C2F1CE9DB92BA5E1D73E0771
+:100DE000AEFF25ADAFAE191120FF551B25B7D06C56
+:100DF000F9C03928C3F6560B106EAAEFF7E468F570
+:100E00000CE747979BE3F760ADCE69DF999B4B7A80
+:100E1000EA2A163818646415931C8F8FF675D1FC76
+:100E2000688AB0B72ECAE5DEDEE9E012E51B9A9FBC
+:100E3000783DFA151E009F3797A817E97E75F26571
+:100E4000CEFBE78A3E5E17C98AD9AD844A9B87FCF0
+:100E500007150859393F4C705EA95329DE2DC2751C
+:100E6000501E253E3548216ECCBCCE528AABB8AE62
+:100E7000A904F7A9B6468615E173CFDE7DCC2AEC2E
+:100E80006E88B03B2D2EB5EC3EF8F86031F4419CF5
+:100E90009F55EFBEF4DDE728BFEAF30E374D8FF91B
+:100EA000D70B2BB9DF0487218EE87E37AEC9C6F594
+:100EB000F6F8E6518B68DEC48FDBB289AF496D115D
+:100EC0007E8F166DF974B03887DE875C947E4E3E57
+:100ED0003EADE589D3769117E8BD30F77B8DE2BD55
+:100EE00070AD8673D6B648A100C71FD13F2FD6F884
+:100EF0005B71B0711FE1278B373D3883ED2824FAF1
+:100F00000A17FE525C587A44F4CDCBB61BFB8D6AAF
+:100F1000EA9B693E84AD640F2BEA13EE6FAAE0BE34
+:100F2000B93A3EFEF7D0377B4B347C6C280C65BE5B
+:100F3000E4797DD51EE261625F5C05CA8412AE7BF6
+:100F40007D32EDEF35F78C3FF42FD0DF9389FABD7A
+:100F500052DB9BE4E460B958B99FA8DDBCD2EDA494
+:100F6000B1E6B75B4CD453E3C4773E80F8E7743FF7
+:100F70005EB25EE2BE0336F5631B2C7CC5A610BFD5
+:100F800085AF0CE43E04FB25AE0FB7BC625B4FE3BC
+:100F9000E0EFFA04E442C2A13B6F201C269884F5DE
+:100FA000A6C0F341F2300EC3B8C823255ADCD7EAF5
+:100FB00000081719FAF9A096FF6B53460EC4CE39F4
+:100FC00036EFC020437F12D4EAED123A27D58DDBED
+:100FD0006F10F793041F7B3EFC8764AA7B1BCDBE7A
+:100FE00064C2B5CF1F1ACE7D4C6F72F7621A82AB06
+:100FF000BCA7F47E3A23FB6A7A2B79DE2CE4A5D9D0
+:10100000ED9B7E05BEB4C4F4A2F337557EADC24A53
+:10101000B8C843E0249CA4F6E0CB413BF5851B8097
+:101020001188F320ECF9FC1913BF772F859C7F9D65
+:101030008063EF19B33B84CF37687191DE3FBBE229
+:10104000ECCCA6E1BF49AE3EE08AEBA39373D20D90
+:10105000E314F70D86E7FA960D37DC47796FA5F5AF
+:1010600021A0B4E695C6EADE3465B4E1B9A752A77B
+:101070001D60BF6F7D9871A97ED33DC6F3C8CD3288
+:10108000C503B820EAA532FC257F1B038120E96354
+:101090005CBBB18E2A8BD471DF9874C86CC0016CB4
+:1010A000D7C0A5B6907F519C1C024344DC4894B73E
+:1010B000F1FB8BDA8332D77BB543B150CDEA49DE01
+:1010C0003719E4ADFBA32EF7FE3EA3DC07CE31CAF1
+:1010D0007B906A94F7E0C546790FAD31CAFBC6D55F
+:1010E00046B966058C72CC5E3FCE307F445DB961F7
+:1010F0007CF3F3B719E68F0ADD6518E76EBFD730CA
+:101100003FBF7EA1E17E61D3D2EBD27F51B8D63012
+:101110002F51FFC5077E7B55FD07F057E81F581F6D
+:1011200065A88FB0EBFFCF0E4EE87156B783EB8CFE
+:10113000B36F92CF329E302112203B284B663B99F1
+:10114000992CE2CEFB07CE1F5270FC81ABD892499E
+:101150007596563FF8B438A4F733897DE39D655200
+:10116000C2FBFE24C3FBFE6B7D57E76D0D1BC6451E
+:101170008780BF9BF11C71BF4DD47B5261B8ABF42B
+:101180004CCDDB44C75EE0B4DDAD5FD5BFCF4BECEB
+:10119000B760F9217EAF384F7F2F434E51DA1D9F44
+:1011A000D4FB31BDCF4DEC7FF5BEB77B9F26EA98CF
+:1011B000EEFD863BD3CC75B4CA75F57E49659C734C
+:1011C000CB2875B0D74B4D00F6C926EA93234121B1
+:1011D0004C05E83D7494FEA72224F0CCBD84C7479B
+:1011E000D380F17345AABB3790C7C777464A057CC1
+:1011F000443FC55E758417F57A4272AE2B267C6239
+:10120000DCD7C3A81EC9F18A3ACF26A3A4302F0D7C
+:101210009CA7005DFF215D19E5F5C6F092DEEC2686
+:10122000F1FBA4067F98A9D9E9E6EF9712F1C588EA
+:10123000C9C5F569E0B7127FF7F3351D6E6CAC8E4A
+:1012400039BFDEC2750C68FDFCFD9AFC75DC639E3F
+:10125000C6CF095C6231E6E5FB9BF6B35E9665B6E8
+:101260006B78490DD7E30F0E7178F87B38A5D82D30
+:1012700070321D07192CFF94BAEB5AFC2FCB3C6B34
+:10128000C0A1E0B57ED7F5BE3CC6B758FFC4068105
+:10129000679ED83094F1F3D8FAE7188FBABFE643C7
+:1012A000837FCC5F7DD4E00F0B02C70DF723199D20
+:1012B00016C21F236F0C9A761FCAAFA3D1564AFAE3
+:1012C000403B7898F4AAAF1FD9903B85F6BD369F76
+:1012D0005FF339DAFCADAC5F9DCF63FE233C8EF843
+:1012E0002309DFA7093E759C43A7D6BD9063A6F7E7
+:1012F00089521F37E1CABDE11FBA9F994A87F33A65
+:10130000174DAE530227AA1943F55FDBE401E574DC
+:10131000EEB6A156B3A023C57850995D8CA74D2792
+:101320001AB538D6132ED22689EF89E649CA4B0B57
+:1013300070DFC747A94F913F542FED2C20FFAB2EF4
+:101340008C3C20E1FA5DFDD58D241F09DB8B41E942
+:10135000CC077F7776C6142890D055F679BFBC9716
+:10136000FAC4337D02E7A842D9DD784C8CADC21FA8
+:10137000DFF71E60FF3B898B119F813F4B029F72FD
+:1013800044ACB3709D8CFEEA73B42F7D4F46EFF7EB
+:10139000E83AD9A78E97462DA24E8C6AF5E266AF41
+:1013A000A8675F4AA04D54E312FE4894E3F5D323A7
+:1013B000094F3FBFC90654DFE2FE8AA924F6FDCAE1
+:1013C00000E485EAD877ADA2CFF4FCC516A638A50F
+:1013D000E3AAAF7BB378BD8C6C819766FC33C62DD6
+:1013E000F2C348EBB0592971E73D048C6377101EB6
+:1013F0001D8763BFEE15FD3A3C24E25EC786C18CB3
+:10140000B7AF3878E218C5AF7BBC6A23C975A1C9EC
+:1014100055CADF67A5EE61DC6CBFD7C5FBE27999E1
+:101420005F8C436B494F2BEC11C6D9AE85ABF7C629
+:101430007FC7A2D6E7F21847761590DDE8FBE239C0
+:10144000F67BE3F06FFD1CB175AEEE073A3EAC8F54
+:101450004F6F7E6AA486EFCFF7F5905F8F69726950
+:10146000B3F48CC75FF28AF778DDF4733300E1FFE1
+:10147000B63E98FB917EED15FC77CC457E18DF508B
+:101480008A48BF2BEE72B849CEFAFAB88EFAFA55EE
+:10149000F6E91AEDFB8AF85F5A23F07BFD7E5412C1
+:1014A0007A0D6C1078EA8ADD478F3D8EBB2C79353A
+:1014B000BF98F281FE7CA29C51BE23F9FB3B59BC34
+:1014C000FF42F99EA7F51371FB9F2BD7E850F19EC1
+:1014D00036BAE5D230FA3E6D057D0F5740F621F061
+:1014E0002F6830E25A28AF00E11BDDDF6B01BF1F20
+:1014F000B369F9C4A63F3FC46C78BE3EC597548A11
+:10150000E77F438B1B383F64A2EFB9B5F8D4A0F551
+:10151000DD89F84B43ABC04D1B32AD5C4753FD43F7
+:10152000F7F5FA67D58702375D9525EA6C3A27E922
+:10153000593AB28FEB852BB8B884F91EE5986E55F1
+:101540008794923FA92B399FC937A29EE97DC85F36
+:101550006FD37004911FBD5A3EF4D23A74AEBCBE34
+:101560009C274BB47DB1BF60FC6E2CA85AFDA0E156
+:101570006F1BF619F087FF037A5FA88030310000F7
+:1015800000000000000000001F8B080000000000A9
+:10159000000BFB51CFC0F0030947B0A3F20FA0F13D
+:1015A00067B2A1F2B3B950F9875950F9FE68FAD180
+:1015B000713B13030323137E35F8B0083303830C08
+:1015C00010AB00B10E33F9E680B089280343A904BB
+:1015D00003030F906604D23E405C06C4FE407E27A3
+:1015E00010CF0262197106864B405A5E8C81E1A5CC
+:1015F00028449F2D90FD438C3C3BAD792973F32803
+:10160000A60C5BCAA2F285D41818BCD51918266B93
+:1016100040F80648F2AB8062C26A10F611790606FD
+:101620003D205F5D16BBB94781F2FA40F9DD1AF83B
+:10163000EDDFA183CA773543E5E7A1C937BAA0F248
+:1016400035DC50F9AAEE101A00B1C92A3BD80300C4
+:1016500000000000000000001F8B080000000000D8
+:10166000000BCD7D0B7C54D599F8B98FB9736732D7
+:1016700033B949263079C14D081030E02484808A7E
+:10168000701322449BC204698BBB6C77C4D646148A
+:1016900008EA6A7C6C33790701096A77295A3AB1FA
+:1016A000A2A0B44D5DDC3FB5D69D40DCD2D6D6A01D
+:1016B00058E9AE6D23F5DF5A57D9A052A9D2B2E747
+:1016C000FBCEB9997B6F2609E8EEFE363E6ECEBDA5
+:1016D000E7F19DEF7CEFF39D1345F4106D0921E7D1
+:1016E000E1873E5F25F4273BF924A48790F9F01C9D
+:1016F000922373E019E3EFD933B8B64F2045581C55
+:101700002495841410F653D0D4B9599C4BC8641254
+:10171000FEF1CC425A1EBABE8E0468F9F5ABFF004A
+:10172000CFCED5D5B557E984E4ACE93BB69C3E8332
+:1017300091B8102D25E4412212920BFD15C7AA7C09
+:1017400084B44367971332299663C44AA160D002D8
+:10175000217FA7F28188A8CBB4ECC75F93F3309FB9
+:1017600084282451821585F3EED1ED9DF5CDA71F78
+:10177000DA99750AE1FFB71298DF44EDC8ED6CBC49
+:1017800018FDE73CC54B5E727CEC27A7C152268052
+:101790001FFB776304EF9BFF57C6CB25E51EBD8279
+:1017A000CEB74ED4E2509FF465C8B41CBC452609A0
+:1017B000817EAFE8115CFAC4EBD249486D9F0FF10E
+:1017C0002BD4FB93F07D8E08389F2977BFD9DB158A
+:1017D00024E4CC5A5F18E94323242B73F47CBED64F
+:1017E0004C48C26D29AFAE16A2385EF8C7C5B47DAD
+:1017F0006CB518DE0BF0D4ADCA80F766BD3BF93886
+:10180000A3E983E832C5A3CCE943AE130DCFDC4F87
+:101810004F1FF227A48FECDB2DEDC8C5AF17E27D7B
+:10182000FE85D3C7A71DCF5CD7D17CD582704CB9BC
+:10183000BBD843E8FA3F50BB2A3D9AA2DED8EB5A08
+:101840008EFC1EAC23463C45BB2DB09E38CF984D38
+:10185000DEE093AE8F34B2BCB7D9D64B9A5CB9A652
+:10186000771C7C4841FB7CCD7E9526497F338B16C7
+:10187000654D84FE64DE5FA7B62E46806E81B62974
+:101880003EA49EB204A1FC414224BC974320D2B2A4
+:10189000A219F1FB0428C5715D4CF8D462D1369EC3
+:1018A0002BDF6B5B0FB2262658E1579A1484430650
+:1018B00036E1F22E82C28DC10D439C9F06E57B6C02
+:1018C000EB2FFB48C243E5EA96E272625D07934E56
+:1018D00005C1A4D37B2E4CAE38C75B6D87F382DB8A
+:1018E000F964FD77669BA2F1DAC9E477269E28F2B7
+:1018F0005E815F2CEBDEE52287844B0969CBEF8CA0
+:10190000C1DB2EF8DF65489F20B448577EB906F446
+:1019100044F60932C0E931C9239489F57A898EF4F5
+:101920001413EE20504FF245104FE6F7B1E1E27488
+:101930001733FA8B69BF9FE5DD7E96EB3352E17A70
+:1019400073C884BB08E7912CD379BC7B17FD1FA516
+:101950008F589910DF2B8CFE5E07FA90CAA33A7855
+:101960006F91276EC12ECFEAF8B723CFBC36631E26
+:10197000A5C7C1B044405CB53EE3366A68FFC7AE58
+:1019800014E26E81C34BEBAFE070BE686415007D5E
+:101990000ED6B8917E572CFF3008E47BEAD02B722C
+:1019A0002A7E5DB1C8958483FEB7C93A3FFADF2429
+:1019B0001803F9B206E9C8846B43B984700C2E127F
+:1019C000E230CEC0AF7E7FFF1514CE172B84B05B04
+:1019D0004778FD848E3768BC1F1C4F4E10737C9D6A
+:1019E00068804FE7F823EBA186D7005F36688A7ED0
+:1019F0001F1DEF66297C14F41899CCF4438336A399
+:101A000006D64712187D2C1572B05D9BAF7512AECD
+:101A1000BBB436A5BC6AA08A422B87EFDB668C0B71
+:101A200067DC353C64A1EBA6D70BEF1FB0C039478C
+:101A3000F0077F97467F594016C03ABFE75B959EF7
+:101A40002063F7F776B3DA22BB08F9B059BF7FC03D
+:101A500035FAFBCD1269EC2B1DFDFE1A41E5F88825
+:101A600029609F99F31E99A72F88F47D33885F4AD8
+:101A7000EA37EFF3B4C856F9E398C7087E3F613BF5
+:101A800035786B2C57077E8BAE14A01F99FE5399A7
+:101A9000E4C79B0FD433BE73C0DB11FCEF81772208
+:101AA0003E7ECFD7DA09F66A9B8BD14B7BB6186E98
+:101AB00025A3E9C55C0F138F17BA1EDB040FF2874D
+:101AC00049470DE2DA71D77D223ABA03E8E892FF7E
+:101AD000793A7A10E868FEFF493ADAF57F918E92FA
+:101AE000E5E5682FACE47DF50FFDF62190CFBF3022
+:101AF00024947BBF58C4E4FF2FA24C2E0E92E8F62C
+:101B0000F9A00F8E4B28A7068D363FC24B4D629829
+:101B100007FA5D94FE5E017B692695EBCD2A3EE9CE
+:101B2000EC0B56D1EFC7AEFA301FF4D731BAB6601E
+:101B30007F13326C18B4FD4B23656A8043D9C3CA46
+:101B4000C32D6763609F0F0AACFC2F2D678D188E25
+:101B5000B7AD7339C5E74AF895C2B17A9160C453FD
+:101B6000D0C54F0485E1A586D8F42A5D979F0894D7
+:101B70005ED4C866B4AB098910F40F8BA99D60B11F
+:101B80002F9A4081815CAE71A3FE73F6FF12B70BF2
+:101B90009D76DCEA45652ED017EEC86979883E57F8
+:101BA00046042C03FE350BDCA22118A007228BDC97
+:101BB0008F82FE8BC8C4A5A5E0D79586DB66779D8E
+:101BC000E67A8CE2650DF35BB482FA39C9FAA74D67
+:101BD000FDEB98CF587461CEC32C5FBBE8F4401680
+:101BE000CCBB56084F8786AA56F045BFB5FF34D305
+:101BF000BEF103DE7EB1E6DA74460751D4AB263D72
+:101C0000FDF88DAFB860FE647516D2E5EA3AC96694
+:101C10004FAEAA49B3953FBFE8DA71ED7012B5E057
+:101C2000C142F7813C82744A7E43ED144AA7B1EA6F
+:101C3000E128DA2D2705BD8D96D317374D857EEF28
+:101C40001133B1BEB0B869E610DA5BCB90FED37841
+:101C50009FE94AE3EF8B40AE4E17C9A33AD8A3E3FE
+:101C6000FB051D9CCECDB22B188D09743DF5985601
+:101C70002E8D83EFB821D6A6F21BA6896CDD3A62C1
+:101C8000ABB4620068C02E37326A1AD1FE33EB5310
+:101C90003A9E2666C3B8317C3F42C7DD745EB49D70
+:101CA00097D922247DF6AA7432CE3CDA1DEB4FC5BB
+:101CB000BF914ACEDECCE1238758FFA64C4ACFA481
+:101CC000FDA7A86F3EBB78FF67C322190438E588DB
+:101CD0008AFC50524DACFD10A30CCB0A2FBA431115
+:101CE000B590E2D35D2AC2344847E9A386AC031E0F
+:101CF00062B8DE5BE9DAE65BF872EB9F25F4F36F1E
+:101D0000168B5A406E6CEDBF89E8141FDE509C6044
+:101D100079CE8D2AE0692B75B206617CB98F001CE3
+:101D200069F9F4773A4E9A46E23AED4FD6FB122221
+:101D30002DCBB5246CD04F7E2D2C78A99C381C2A35
+:101D40006A91E9FBF6B504E52301E961A19FF6D0AC
+:101D5000CB8604F4B3868401E0F6E03A9C6767E939
+:101D6000BAEE42FAFE4C9D8CF103728EC26BFAF50C
+:101D7000D4CFF0961003C6DB9A43E23EB4830DC481
+:101D8000AFA2B1F5D3771593C43CFA3DA3B21FC6F9
+:101D90008FFD3D617C49985C93B93C2132A53F1889
+:101DA000BF490BDF9782FE5412BD499C6F59672DC6
+:101DB000827EAC136FE90AB906F0DB5E46F9208536
+:101DC000DCBB4314910EE2E1552B8B528C738FA830
+:101DD000A37C32CBFA5905E11FAB7EB29E4C12595F
+:101DE000D0B521005E482488F3CB24233F0694B36A
+:101DF000F87C279146AC175AD8D30FFC966BF45554
+:101E0000012EBEE6FFFC315C37F28806762C85B6E3
+:101E1000F87C56525E80CE81F9BD1716D1EFF08B5B
+:101E200009CDA01DF83D8321747E758271B9746857
+:101E30004201BEAF596D07BB2440C2027CF787E563
+:101E400098D5AE4F27B46C8BA790E3C59584897C59
+:101E5000FCAEF503EB68258D9702300F068C7F05ED
+:101E6000BF699B3F8A7ED8879EC05C18EC4E6FE0AE
+:101E700051787EE8991247FF2CCCFC2D95FE03F299
+:101E80002E7DA16CF36F320C7B39CBE1872D937CD7
+:101E900038CF8CCF12EE5F1975D32725E1A210D56C
+:101EA00003BDECAC9109F8FF3E1F83C7842F4BBAEA
+:101EB0007701EAC7B07C12E0A0684138CE90730980
+:101EC00058E24009C1F82985EBA403AE930EB84E41
+:101ED0005AE16A52D97C9DF662AC9A943452E07E03
+:101EE0002872FF83DA4D60379E21EF18B540389194
+:101EF0006B50CF0634D6C6A70E62B042231AD281E9
+:101F0000D36EA4EBF49ECDFF5AC8CB3A11601E14D9
+:101F10004EFB77928FF48265898CC485D72D34F17E
+:101F2000A57FE1DF29FFDD74D44580BF281F4BF07A
+:101F3000DDC5BFDEC4E3C3EBC0BFA6F8FB12890456
+:101F400000BE77898871A877C9CB81791639794A1B
+:101F5000E4F6092CB1958F493804725CF6750E4A87
+:101F6000014483496FC2795CC73093F33E467731B1
+:101F7000A2B6A03EEC66FEA7194FFD728FDD1FFED4
+:101F8000CA2E7BF946B26A12C44B6F7CC845E2B4D4
+:101F9000DF9BACFE3D5DA757450DE1FB0A69EC04F4
+:101FA000BBA4CBC5EC8D751A9121FEB9E1FF7DA3D1
+:101FB000F27A3A9F33200FE683FD4EC1B7E891F5E0
+:101FC000C1B862948E9E5F9B105E718530F6FCBA3C
+:101FD0005C832BC0FF8E6D77A19D499C71D08312CD
+:101FE000C6412DED10DE1BBAEDF39B68FECEF91253
+:101FF000F200CE77FDBEEBD13E1F6B3ECABED4F6DB
+:10200000A64F126C711F93AF4D7A77F27785A4B308
+:10201000B80E558368AFFC3A2DDE86EBDBB800D6F0
+:1020200077A2F69741FBEC4FDE7EF1A71C7FE90417
+:10203000ED37A8C3CB60BDB7047B22C09F661C6B85
+:1020400023891979F457D7739B6360BA8DD40B5DDC
+:1020500060BD7C5A4FBA807AC5E3F7778ADB253FAB
+:102060003AF02D05ECD4779F7C6305D80137FF400B
+:10207000222AA5875307FC2481F64A5C01FB663DB2
+:10208000A5BB38961395D75AEC614AD1B80E377F65
+:10209000D78F76C4FAA7DDF13ADA7EFD3FFF762EC0
+:1020A000A17838D53AFCAF7940CF4F0A2CEE1A1BF5
+:1020B0009A7B2D7DBF5E267F1B494147D74B8C9F66
+:1020C000DEF97EDA1AB013857DFD5FC47EFBBEE0CB
+:1020D000725BF4F11AC985E3D27AE847C4F60BF1D2
+:1020E000E90283CFEA0F98F1EE77F60B0CBE43AE10
+:1020F000B807E0DBD7AB4469BD4DFB4E235D2FFD38
+:10210000EEB70380874D87EC76FAA67D52C23D1765
+:102110009F6FC01334A85009F864FCBCF1E006D4EA
+:102120001B1BFBB69E067EDE74C86593FF142FE171
+:1021300004E0F535295C07E57F7A22A05354BD3DC4
+:10214000B8370078A5FD5EAF50BA5AB9D0DE0EFAA6
+:102150003F9B39BA3FEA19A2DFBCA96F0B1BEFE026
+:10216000677F0FF27613617ACAE4E7B7E1979CD1F3
+:102170007A668B648F6F9D212F56E23EE0BEAC9451
+:10218000FEB3A9574CBEBEF9DB67F6C4E8F8EF3CD6
+:10219000FD1F7B62741EB7FCE5FD3DF7D0F991E7AA
+:1021A0003D1AC8AB4D4FBE1A2016FC3F26B1FD802C
+:1021B00053FB9F787C37E59353BF74A31D78EA8760
+:1021C000BF9FA2D3F99FFADE9F26819D7AFB0FAFB6
+:1021D0009A0CF8B8FD99A593C7B3D7816EE36EEB5F
+:1021E000FAC6B17FFD90009B20843CC79F8E753A54
+:1021F00072504A4088E0DD13EEB89BE267137DD74A
+:10220000540EEBB601F51594EFA5F8DE78A0EBB40B
+:10221000343715DE637962089E893C128275BF7679
+:10222000E59515F0748575A013328C7AC2D96ED3FA
+:1022300071BABE978EBD9ED49E5000FF9B0E6C61FE
+:10224000E3F6D1F50C8C5ECF77E197CB46AFE71183
+:10225000C91E673A436EF9E66EF878300BD77FAC4B
+:10226000F5DCF0CCE7C6F5EF4CF930119E1B040607
+:10227000D70EC97845027E7CFAA9C77707D93AD725
+:1022800051C49CFAF69929B0C9FB966BF88B2027AC
+:10229000877FE8D6C0AE5EFFC3D790EF4E3D734C4C
+:1022A000D1717F9AF804AA274F91919F41D09B1B2F
+:1022B0000556D8F4983FE10E24D76B63BCBE560F89
+:1022C000E0FB37F07D9CF1C3C678FF6A21C5FAF9BF
+:1022D000E422A69FE2D988970DFAA0A2F9ECEB2A96
+:1022E0002C84F57C6319D0DF58EB69CE5F83F92F1E
+:1022F000B0ACEB638C8FC7E2D753BD6E59481FBD9E
+:10230000CEA7B85DB1292EBC966ADD096965F1BD1D
+:1023100031E2DEE6D349178A6CE773B3BD39FF8932
+:10232000F87CE2795D1CDECE707DEDC4DF3BE752C8
+:10233000EB812259E07AABA736D7A2EF3C2EAAC791
+:102340000AC1EE6C8CE51526E1EDEC9350BEBFB3EF
+:102350004F427BDF2927368EE1D787CD710EF5CF2F
+:102360000579F6CEE1EF737A64F4BEF1C01B4A8CB6
+:10237000EB85B8552F407F29D6E372DEDFA6E75202
+:10238000F7B7E9C0E994FDBD2D1B5F00F8DF1E74AF
+:102390009118EDE2ED3E29659CA45876D9ECAC4E3F
+:1023A0007FE58974DA4E0A787598775BABF15A0C41
+:1023B000EC91975D04ED4739FC969B7E6FF37B7142
+:1023C000BFA52D7023D12DFABBDD81273914413FE4
+:1023D0005A0E462AD85E68DCE6CFBA34D106379169
+:1023E00063F9B0CFF9F3C2DFCBD02FC4D3744B5C09
+:1023F000E8259974403CED254308B79014712D47AA
+:10240000FF914512D1AD74664C15ADF1C5C0E1BB6D
+:1024100030AED1441A13106F22F9A46FAFA5DF4775
+:102420009A7516778D4C15ADF13F7763A3E1A670D1
+:10243000E4DFAE1581FF36D6F8058DF67D5F73FCBF
+:102440005B793C82EC7BF2C92769792A7C13810E87
+:102450002306C2718EED2B2FE5F2F047DC7E3E2C79
+:102460009001B0C36AEF8DCA20EF84D0F518175DD4
+:10247000967FBDBCCE428FCB42A77340AF7EF3CFD9
+:10248000D29A54747A88D355CBDF3F9E03ED777B85
+:10249000BE90CF9CD908C297C7E35D03D9CB7D100E
+:1024A000DFEBBF69D98B33E87C73358940BC269755
+:1024B00054F9CA289C79C7A5B027C53A98CF3D3CA6
+:1024C000AEF768B386F2FFB1E610961FE778DDD766
+:1024D0005C82CF279BC3F8FD40F3422CF735D7E24F
+:1024E000F3E9E608BE0FDCFD6CBF0278F92AE98348
+:1024F00078CDC1E635F8FD9F9BA3F8DCCBE7B30CA4
+:10250000F0E2B3CD1FE33187DA97B4423CC6C4A3EF
+:1025100013EF4B486CC08DFBF9820E78BF4B66F20F
+:10252000C589DF29EE3E01E44BD32D04EDD73D3CB8
+:102530006E6CCEF7EB32B3370F72787EE0897E4750
+:10254000A6CFF76A8B4BD12E229130C8EF3D4224A3
+:10255000BD8C5679217B41C82A87A7FAA30765CB92
+:10256000BEC2946E16EFD92D337935553FDD9F41AC
+:10257000F1509B2FE8104E30E77BB84ACF073979EE
+:10258000581070BD6BF3255262A17BB3BF6FC82298
+:10259000DFDF482DB79374CCE441E6D57209F8B576
+:1025A0006788372C517E7F3E871C24D4FE781EE836
+:1025B00012E4C2AFD2304E6CFA37DBF87A670251C0
+:1025C00040BEC4EBFE38C89FB1FC9E4E5EFF3D0E80
+:1025D000D70639F28A8CFBCA3CFE4A1218C784948B
+:1025E00023A0C7DD9EB53B6AE8F3FECBDF3E01F1D9
+:1025F000C1779FF1E800D7F68A93012B1E4983FC2F
+:102600008E753F7E44DE9CCDC3B8D8FF27D137649A
+:10261000AB1C0A0E2BD0FE7941DF09FBD7B1572541
+:10262000E4BFE785F82C8C63C904FD82E76F0A617B
+:102630007E87D9CE1FB6F377A667E8E14D30EF0667
+:10264000251C4BC117BF49D36DFB46EE90BD7D08DD
+:1026500074E67C56D6297D96F1798765430238E683
+:1026600093283E17101D9F39AEE847308F79A42F6D
+:1026700007CAAD6953AE60FB07FF6378535DFF0780
+:10268000F166D26BE8F2128483DC2D86A7EBE84D6D
+:10269000DAE87CA54BE0F855519EE78EEC4F35FE0D
+:1026A000A82088DDB0388996867230D7C3F0D73439
+:1026B000741AE3BBA129C41677EF6810910F76BF97
+:1026C000CEF6F5CE3414ED9C41EB57117D474DE12C
+:1026D000E87998FCB15B8DA4A7DA9F329F265F98BA
+:1026E000E59D53BF48400EFDE3D42F62DE51EEEB73
+:1026F0001E1DFC8EAA5FEF6F01B9D8F106CBAFF8B3
+:102700009537BAC8353F29673A6E6A9C0A7E50C031
+:102710001F59ECA2F889E4C7AF037977A6F676379C
+:102720004EDDC7F25E9AEED577CED4C75E9F3D4DA3
+:10273000E3EFDF98F3DA03F31A67FFC29C97B95E01
+:10274000676A570FDFA8839C294E8FA66837224FF0
+:10275000AE5E3DEEF87BB85EA1F35F6BA5CF294D71
+:102760001AE6B798EDCDF93ADB3BE79BDC07BEB044
+:10277000BCA03E17C9027AFFDEC753FEE925148DBF
+:102780001109F434E5CF8D004F2569C43291FB72F5
+:10279000C0BE31E97977E7E339A817E47821E67715
+:1027A0005DE0781D2412A9027E0B8B61ABBD623EF9
+:1027B000DB46E83C81715537970362DABDA1547856
+:1027C0001EE93FDFCEFFDB0861723EA1A29C87407D
+:1027D000A146CB854749F97DB4BF06480AA5E35415
+:1027E000C92C1E32EFA8DE2BB1B8AA54EFB7E09186
+:1027F000EF3798F1DD0E722FD174F02BCAFAA1BA1F
+:10280000C9A74794E84340A74A48C77C4F57302A96
+:10281000B0FD38B63F54C2ED92ABA4B52AD8254DD1
+:1028200024A2CE06BE3D2E119687C7F8DA6DEE8340
+:10283000713E76733EA61C8CE519FCFB739CBE0EA4
+:10284000817D82F604A3A383DC3EA9191E3EE2A784
+:10285000ED4A067BAA613A4F83BDE206FB248CDF7A
+:10286000BF03F60A2D1FC9F8C76B6653BCEC33C40F
+:1028700030E0FA40B3C1F8A1B901BF37919877337E
+:10288000C8A547440DE0EC7AA4550AD0F27E55C0A5
+:10289000F8C523CD8D583F70CE9B007F73BF9A1033
+:1028A000C01E391326E118C04DDD2398D70C3E8F8A
+:1028B000AA370771BBFCF1F87BBFDD41EB3DB8D017
+:1028C0008BFB64267FCD681AD6AE01BEDA7B52DF61
+:1028D0000CF0CFBFD580FADBC245B84FF104C51765
+:1028E000ACD3BE5DEFED1AA4DF0372D766F0836749
+:1028F00016AC427B28A0FEE36D500E684FFD1D3ED6
+:10290000D5EFDF09FA7A665CB4ED9F07D49FDE0548
+:10291000DFAB87C235E9B49F59C707BBAFA6CF8EDF
+:10292000F0ED2290787AE61F705FE3B0A07DA907F2
+:10293000E26AD72B48AFC609A305D8D15561CF832A
+:10294000CC7E310A690B64F200C53B01BC1B32F43A
+:10295000FB96AB10E92C14C8A909D0F2E38F9DFCBB
+:10296000F1D5F4FB915DB7A25C743F22A33D36F331
+:102970001BB793AF58E484FB3139655EE95B2E37B2
+:10298000E3A34756F7CCD2197902FFCDDA5BA3A2B5
+:102990009C78D19EE760EE0BF792E85B2EA4676609
+:1029A0009FC81ADB47863D2FD84F240F8B8C4F22B0
+:1029B00051AF35FFB9E4EB6224559CFBAC4BC679B3
+:1029C000B5C76B4A601DE4F377E03E19E9B18F6F3C
+:1029D0008E47C73F6B956FB2C6E02A00D54FD7B37D
+:1029E0005FF9F71C80FF6CA3A9A712A8A706CAC4A9
+:1029F000C4540ADF030F897148CA3C52CBF4D6761F
+:102A000099E50B6EE7E5C7CE91B85098E4A3999C81
+:102A1000DF1E7B4464F65C9CA09E23E7CEA37DE191
+:102A2000E3DF33CB5E56717F2266F8AA2A312B9002
+:102A3000FF58E885E2E8D298D72667C5A64CDBFAAE
+:102A400017508BC59E4F5D94AC2F811C3FAE02FD8D
+:102A50009EA17E2BD0EF12BE4F5463E6614AE7E69B
+:102A6000C1FC1F36F5AC9937E3C893DEDBB8CE0B5B
+:102A7000F1C2174CFA696834D0FFD1DC389EB94FE7
+:102A800058724B2406FAD3956FCF9FAE72E4472F4E
+:102A900071942F36BE52AE38E3A8DB66211DE801E3
+:102AA0009457C51CCF7B2FA3EE7CFAE838CB48BFE8
+:102AB0003C8E407A02B87EC59C80EEBF5B6A00BF48
+:102AC00020F040798635BF60B9C2ECEE815FB9096C
+:102AD000D8F9FB6B548C679A799D2E3EEE0A45C758
+:102AE0007AFB1FBA4385F65DC1220FE0EBC8E5EB28
+:102AF000BD98FFC1F3534DB9DB7AF9FA6B6E0279D9
+:102B0000982DA2EEE9C86FCD857DF9076A54CC3FB8
+:102B10000DA40DF51DA165DF134AF851FA7D7F550F
+:102B2000628D356E7387C2F4D7750ADF07DA66CF18
+:102B3000DFA07C709D02F961BE46DCB714559EC7CC
+:102B4000EBF0EF4D7C040E5F2716FAD9B3C80FFEE9
+:102B500028A38F38A78F3DDC3F7D04E4BF1BE886A8
+:102B6000C9FF6DDC3F75F63BBD217258013BEC1689
+:102B7000AD1C4251CEF59DD66DB7270A6376393725
+:102B8000D549F78DB9B6FA790D45B6EFFEF06C87E9
+:102B90007D92607A8DB0F5E9F2F8A681DC2EA77AF5
+:102BA00097D9199A18B1EEAB38F47A83CB68562EC0
+:102BB000C2BE09A4451A617D9CF6F456BE3E7F2331
+:102BC0001B5B94F9E8BF6D8527B58F79BEBADDFE32
+:102BD000180527A170CE1917CE872E06CE89F6D9F3
+:102BE0009CFB6B774A915D2FD1E7E274960FD9E198
+:102BF00067FE7C07C45169F9594E874F2912F67F49
+:102C000088CF77711AAD9F82BFCDF8EA73907803B1
+:102C1000F526A7CEB3040B08BFE7A5FEFE9CC2F6BF
+:102C2000B3174F1D7F9CE7611CFADCE632BEAF583C
+:102C3000E278ED8AF1036B39A1B0FDE79175E17996
+:102C400094A63D7687CBE8B7D64F3EED72D3DC072E
+:102C5000C9E6EBE9278CFF5E58B36ECB74CACF4A46
+:102C6000BE0FED9FEC35ED9BC500E41F0D6AE00F34
+:102C700064F37D7CB29AC951735F3DB3CE2E579DEC
+:102C8000E7ADDC3C2FDEED3C67C3E5AB931EC7929E
+:102C9000AFBF56ECFB1A23F1EB31E8CA19BF6E82C5
+:102CA0005F999DC9EDE048FAAA3963D3E3CF9B87CA
+:102CB000B70F4C4F965F82F33329E980ED27060E5C
+:102CC000FFA16E7505ECDBB178DA607362F19BD31E
+:102CD00093F22BB228E305887B466A3250DEAC08BB
+:102CE000FD71FB00F5C7EB8DFEC56F5AE639A851A3
+:102CF00068A78DC32786EB232B7F3D2130FAE9E0BF
+:102D0000E3EDE0F874DAD15D62CC0DFD7E40860C17
+:102D100021855F6B9D773BE26DC8077436D6BCC3D7
+:102D20006EC65781858D6188D3B9CF4BC807EEA990
+:102D3000A6DD1246BB659E3B839DFBF015E13E1E62
+:102D4000F5D387FB611D7C2CBFDFD48FEF9BF15443
+:102D5000AEF76ECB60E5ADCD2C7EEC3E72D96B3A12
+:102D60006DE77FD1453CF4FD162AD7210ED84DEDF5
+:102D700078F81EA8182210476FA3F5A316BFBB2D25
+:102D80005CAD819DD05E5AAEEAF4BB34A702CB7233
+:102D900061B9564DC79CEDFEDAD26C8883178B98CB
+:102DA000575B4ACB2DD4A44B776B38BF9F97BCE9B8
+:102DB00003FB2C1D9CF3F9C9F57455440D89C2E33E
+:102DC0000A69D5908B31A2B7399DD1F78F42BCE407
+:102DD00009215AE9A6F3FF393F7FD5A53496DC0ACD
+:102DE0007E8F1C7343FCA04965FB10400FEDF392EE
+:102DF000702FE1F855F8B8237E105FCF0FE4A118CB
+:102E0000A4B67689A421D5FA5CED6672AE5D33B4C2
+:102E100071E949933FB2E54F2F62FCA404293DA517
+:102E2000883F3AE5357147EADDD9C97C25BAB01A41
+:102E3000F22961F69E79BEE74DC5F89C9BCEA3D5DD
+:102E4000C7E5587E26D2297DBFDCFB89E43E8BCFC7
+:102E50001C5E5471AC06FC924117C68B02D3C8DFCE
+:102E6000462CF2F6A81B836EF4C9ECA4FB287DC4A3
+:102E700067B2B80401BA49A38A18F6210BC4F8A3B3
+:102E800085006F6FED34DA5F973C9D5AE6C97EAAE4
+:102E90000A98FDBFBDDADB60F503DE4D63FB2F77DB
+:102EA000F9AA9E86F995FAE2D5E83E4376E62476BD
+:102EB0007E0AE8F8128D0C0922C8C108617A33AC89
+:102EC00032FD5AA3C179298144C9F9B4F1F4A3FDB3
+:102ED0005CD59372BCD50BF808B278977F9780C900
+:102EE00080529F91F08298F4AD6A77337D5102E36E
+:102EF000F4577A898FD6FF63BF82F6619F3F4F06F2
+:102F0000BC3E2FAEFB26C49F867FE9C6FCC6BE3FF3
+:102F1000CFC6FCFB3EFF15CB406EF709E42855F603
+:102F2000A4EA6C1E4F362469B0CF17586A10D8E750
+:102F3000187E8184213FD815FAE9E237E7E1C4D34E
+:102F4000C485B49D87747B68BBF047DEF79750BAA1
+:102F50007ADA57FEE0A524195731E329CBD2A20F24
+:102F600003DE3A26FD5B03F04D37855342FBD5085F
+:102F700001DCE5D922C61F49B62F3E1DE265478315
+:102F800035903F5A2597616A6C60295BEF5F79A3A2
+:102F90007B61BE355A7D0DC4D72B8EEB2867978594
+:102FA000360F40B9F27556EE5018BF40BC8858E451
+:102FB0006ED5D92938BF3E4E27ED2163D010C6E526
+:102FC0001BC7B9037BBE9C950E20CFDD42075197EE
+:102FD000950E16523A9863A50343B8183AF82A2A70
+:102FE000EB4FC23FC66B3542326E379A0F36AB9904
+:102FF000A5A3F9C584E3BE8ACC20C851932FB4059C
+:10300000F7A25C755FAF44C05F37F9C4E48F8F3DB2
+:10301000237C12017E5FEDD3AF4AC527E08758F9C4
+:10302000E1DA31F86605191E08D2462B64124BA767
+:10303000A2E4E797BD553CC5C2074EBCAD582490ED
+:10304000933679C6CA16BC6A23E71BA50BC7FFCB0C
+:10305000B2DE11B4F06127F543C058EE16C304F494
+:10306000CA02DFBA3F025DCA75DF0B813FE87247D3
+:103070001A306F76C13B693752BAFCE3245187C9D5
+:1030800077E8EBBE8BFC7C228D807DB2BD723DC6A5
+:103090007DFF7853742AE8892D14FF27512FC72705
+:1030A0008B9883393499EDB7EB21F68C86D87BC2A7
+:1030B000BFC779D9E0F586B01E5D679B7CDCE16116
+:1030C000FB5D3B3C4CDF6C517A54E0B7E142554B21
+:1030D00095EF5CA9B2FA4BDCA4221CC4D1705FB995
+:1030E00043956A7B599C2FB184BE5F32ADE451EBAE
+:1030F0007E81D9EEC1E63EB453B6341FC267565D39
+:103100009C40DE95B724A6C3FEB8FA97A5820BFAB9
+:103110009DCDF671E17D8BC54ED355C69FEA5FA468
+:1031200028F0B1DA1AD3332DF2581585682A7B7B43
+:10313000A787C569D45682DFD5C35FC77DEFACE2F0
+:10314000B0F06528B7F69030EDC79360EF83C58681
+:10315000F0254BBFC1BA3E9B3E5C41972ABD1CADDA
+:103160002C3C17D3A17B719F6C45B0FA0FF2DCD1D8
+:10317000F4063F272D7463C26FEED7DECEFDF49ABE
+:103180002215F9B4A349E9C573302AB39F3E085606
+:103190008F7BAE00F669A98587FE303C61BF36366D
+:1031A00093EDD74219F66BE109FBB5F084FD5AF8AF
+:1031B0000EFBB550FE4EB38165D8B78532ECDBC649
+:1031C00066B27D5A28C33E2D3C0F3537E0F3D9E671
+:1031D00046FCFE5C731396293DA0FD474A6221B070
+:1031E000ABBBEF520CC8C7E9E2EB7EC428CA027A37
+:1031F000F104593CC1F3E203782EDA131231BED741
+:10320000197A80DC409FDDF3FDDD101F51BFEBC359
+:10321000A7477E9080DDB64788359030211BD58A40
+:103220001A99DA13C5A1CDD59961C0DBE5ED909F60
+:1032300038436F09AFD39265DD5FBEFE7B96F2D453
+:10324000D25ED94BEBDFD5BDA81DE406C0019B6B58
+:103250006DEA929A96624AB445D4A001F957A8C47F
+:1032600081EEBF04EB351DE06776E067485B08E25E
+:103270001F5375A51CF895D64F303EB9B0FA5DAA1C
+:103280008EEF9DEDC6AB27565C503D228DD31F7C43
+:1032900017C6E9A783B4698314F6AD205BC08EF22C
+:1032A000B0FDE06E179313DD1EF6FC9DC7DC0FAF7B
+:1032B0005EEEA1CFE51EC687DD9E482D9C4B199E74
+:1032C00023621CA8CF45BB80430A4D85AFC0F9A13E
+:1032D0003B7E2213D867D8C3F976FA543FD3E7F779
+:1032E000A8A8CF974FFD767B262D4FFF56380CFAB6
+:1032F000792B097B814E62DB985C79AA625A663D24
+:10330000AD7EC9FC6732414F7DAC32BB36CEFD92FB
+:10331000968E1BA742FCEA8FC7989CFC361FA7D746
+:1033200035D888EB39DF87760D752CD06E6909C9E1
+:10333000986724E6B0A7E2D2FE0AEA29D430885181
+:1033400078943F2F50314E72D6CDEFC118447B4652
+:10335000F144B50CFABE272622BFB769DE38D8DFA4
+:103360005B7DE578FE34562AE33994ADA52CCE9AE0
+:10337000E6FF7C1CEC981DFD1E261F7C2AE699C6E4
+:103380004B0F1EAD0EC253D480DFE3C6AA5AC4BB96
+:10339000266A98AF4A7FC3EF0D413CB7B295F075EE
+:1033A0006910F1DC5DC7A48F7E7A29E4EF7C590BAC
+:1033B000F3BB09301F1C4D3311F68D860FA7013C5E
+:1033C0007F63DE6B30D49A46EBB7AFD3C2B00E73D7
+:1033D000B5EA5AC837E8D0AAD11F4A9B53A35E8FDB
+:1033E0007268E4DC06DE9FD15E2A63BE117C07BEF4
+:1033F00024ED6400CECDE771599696512E801DD6EE
+:103400005187E14038D760CB3F6FCFBC06CF2B4907
+:103410002B3211CE0E62A8503F5627A39ECCF3A9A3
+:1034200009B04BF2CCB82F1CC5B0C425B26EB19F09
+:10343000E7C869906DE7C72747EDE56C1E67C8765A
+:103440009CFB38CBE9C58927E77CB3828F6600BC3B
+:103450005970E0571F3D9F0783E5F530CF3CCD8B7A
+:103460007087B4D62A905F9349630BD0DD45C3EBD8
+:1034700080736E69FB20ACFB5C5D263A1DFF523207
+:10348000DC0AFD6EE574DE5D68D7DB7B54C9E4C7FA
+:1034900030F0E3D42691C42CE343BC3266196F5A52
+:1034A00077A6AD3CBD27D7567FE6AE22DBF759F1B4
+:1034B000D9B6EF97EC2BB795E7F45D6EAB7FE9A13A
+:1034C0006A5BB92C718DADFEBCA3AB6CE5F9837F53
+:1034D00065ABBFE0C43ADBF7CB86D6DBBE5FF1D687
+:1034E000ADB6F295C377DBEA9B76BD532FCEE6F6F9
+:1034F000CDC5DAF36EB84FC216BFB5FB0B4E7B5F7E
+:10350000FD4B9BDE0A722DA0207DCBA0C769F9D6AA
+:10351000BB98BFA52E0EEB2057742E47A9185C0050
+:10352000EB561550511FC83E564FF62D43FB63CA4C
+:103530002E2A8FE681554A46BEA7815C6E8E2D2EBF
+:10354000B6C4A53C5A0F9EE1AA0AD4E23E88D95ED1
+:10355000D60C12F5C3783AB37BA8370BF53C3A6D1D
+:103560006F99D7F3A28847A587A95FF8A8C52F1C34
+:10357000CB0F74FA7D17EAE74D118917CF1F089119
+:10358000467896361EAB86B461EAFFFDB587F2E752
+:103590007625D2D04BFBDD5EE465FBA5DCFFEB2E90
+:1035A000EC43BE182E9451BF10592FB5C6ED3AF911
+:1035B000FAA6A94FA1FF49F18EF2D6C4FB566128A5
+:1035C000DE0672E72E2FCAC329BF71BF0CFCA516F9
+:1035D000A9792A7D1F3EA218B00FF520C76B91561E
+:1035E000560DA1A7E250FD6178CED0A99D419F253F
+:1035F000253B0FA35AF314E178B3C3DFAB0659A2FE
+:103600002E66F69F3C5789B7D27E248DC291C2FFA9
+:10361000309F526017DBE728967F07F406D6FF79C4
+:103620003A85AA4C15F3423C4007023E917E3C414C
+:103630001FEA0D0F1C8285B22CC4619F10EC53D879
+:10364000AFABCADC85EB6EDAAD60CF46993FDC09E3
+:10365000780DD6D9D73B4DFD0EE2A95D60F1F1EEB4
+:103660000CFDC56A3A6E77765126C462217E526F90
+:1036700091373BB83E8D7AD9D39437B891333F69AF
+:10368000EF50FADF254E03F87A08C82DCFBD3D0470
+:10369000E8DDA3D1D544BB3EA647509F327BF73629
+:1036A0000E534DD11ACC03783F588EF6ADA7E9F9E9
+:1036B00094F8F30C49C49837365E033376A3BE27DB
+:1036C000458A0E764593AE18BD29E4C15C95FB3959
+:1036D00053CC73AF2C0FA89BE3C38C9B8EC4237970
+:1036E000DCCD8C479AFDDC965D3E793C7BDC43FD6E
+:1036F000D0A805DE2D741CC04BC7B9FA5AC4834C40
+:10370000D8B9DD3F97F6DE87FBB16D3AEC37CFE5F0
+:10371000F67225E087E27B8A42D04F580AF1952C59
+:10372000F07E3F530B7C69C663863CEC1C773846C1
+:1037300024167F73997A4B3C7F29C2AC2B661E19E5
+:103740009ABC4CAFD17FFBE17CD9B46EFBF9CDE9DB
+:103750003DF6F2CC5DF6F2ACB8BD4CADE6E36017D9
+:10376000808D86F18D7DF6EFF5E6BE410D3B6FA6AF
+:10377000D291CF33FD6BBB3F8770FD6FE6BB15F475
+:1037800025AA40BCE6DF6ED7ABB95CCFE73AF46759
+:10379000B95FC2B843D5D1E000D88F667CE8575EE8
+:1037A000DD967766C6799CF2DCFBFA4E42BFA0FF3D
+:1037B0001E75B37807C4913F2CE071957C1E579914
+:1037C000C2E32A052CAEE292F497D60A9827FA3E75
+:1037D000F20569BC94C573D8B9AFF76AE517049DC3
+:1037E0008D17B58C7767496C3943433C07EA99F1EB
+:1037F00015337E10F01BCB817FB7865F6E3C42E9AC
+:10380000A4FA976E02FD5C25BD78B419E45B818C47
+:10381000F9DDDA825BBEE98578257CA7E5EA427DA1
+:1038200032F2C18F5D1847E8E2746D9E5734E33180
+:103830009A97F181CF6BDA47312FCFDFF782BD7BCB
+:10384000C93E2AA36DFA8EC5FDCCF8DE9C3EFBF77F
+:103850003E226469901FB0262E32FBCAF05559F201
+:103860001F67F3759BBB36F1C05A5A3E40E2E570C4
+:103870002F5D19A78FF080FD9CEC2422E039A94927
+:10388000C7A5709CD69FFB9CFD7BA9E31CED6CE754
+:10389000B95AC7FE915F22A7AFA7E36DD31B05906E
+:1038A000A3DBD6525B9E966779F9BEFD0C3203E826
+:1038B000F02AC9174E007E5F95701FCCFDC6CCD78D
+:1038C000AE07BD7E8CE52769D3F49D106FD67E2AA6
+:1038D000A19ED2D24859992FB9DFF40FE7C304F65D
+:1038E0004FCCF8D793745D41AF1CA07E79B10BFC2F
+:1038F0006C0DCB7DD42F87F2D3D42F87E741EA9785
+:10390000C3FB7FA67E39940F51BF1C9ECF52BF1CB4
+:10391000DE3F47FD7228DFE5ABC278F920AD0FF43A
+:10392000E22D3BA84EAB0039ECD2803E9C72A8AA97
+:10393000EA36753525A92F743D85FB1CD557B17C1A
+:10394000EAE5F73D85FB1CD6389C354E998CC30DB6
+:1039500009661C0E42A3BFE6FB1123F1B8288BC7F2
+:103960004DDC8F61F683F1CF51FDF038E8BB77FD78
+:10397000DBE36DF4D386F90F747B8BE07C47238FF8
+:10398000FB99F933BA2D3F7FC3C116CC9F51728E7C
+:1039900037C2BA1EACF0615E89E28A6A206F9DFE72
+:1039A0009CE9C739ED69F3E9D46F7E6E5798F1D57C
+:1039B000ED2E82F9D43181DA13605F34C717BFE985
+:1039C0001A3BEE7AC25BC4F3F8EC7261E41C018F1F
+:1039D000FBB8C19AA5F354048E0F9EDF8EA2B18866
+:1039E000C5FFACF1576F711C0FAF7B7D06DA750216
+:1039F000B5F7D0FED3A22188A375C2B98114F3DB39
+:103A0000CBF9BD2547417BA33387E58BD4E48743BE
+:103A1000D0BE2DA732643D47609E7318F057AA436D
+:103A200096FE6EF5178DABFF24AAAFF571F4B5E4E1
+:103A300066E77CDA0E5FA6C2F98D6EDFBA41F0A3AD
+:103A4000BB43418CD3F7E75492214BFF5268219E30
+:103A5000F3907CCC1E96422ADAC332CCBF3459DFB5
+:103A6000ACD7C2E53E65678C2F7A7C3D58CF2D4799
+:103A7000F07E09771054267D6A6CDFCE5B2C12D560
+:103A8000222FCC71EFF63279D95D1AD520CED21D16
+:103A90009275382FD2AD97239EDB389EDB0A4C7B84
+:103AA000228C76CCF7B97C35FB69E37180B60605CC
+:103AB000EDB948538656938579BDDF017EEEF6B5A4
+:103AC000AAB07FA9E4548CDBEFC084FD964DAA997F
+:103AD00087FD7E1FFA55FCEB34E8D735C6F9A463A1
+:103AE0009C1E3EA9DDEADCEFA3D086AC792BCEA7E5
+:103AF0009FDB9FCE761B4A871458F72D8FD9CF3383
+:103B0000BB083BDFB5F1D066E4F3EDF220DA51DB20
+:103B1000CF0929CF8985D204CE6F23FEBDCD0ECA31
+:103B2000E3FC94C7BF03A981BE284BD8ED96794723
+:103B3000EDE5F983F6F282134E3BC87815ECA0D57B
+:103B40005CEE0D5279CF92668665C0472416AF02AF
+:103B5000B8EB495F0BE453B8249617B29AEBBF95C4
+:103B60005C3F06D23210FEBC06AFCDFF24FC3EC047
+:103B70007CDE7F41CDC0E67610B211D3AED2D16FDC
+:103B80002DB8FAE92A14970EFBAADEB09FF75FE979
+:103B9000B09F9C765695DC8B79BBB98EB886B9EF11
+:103BA0000BF3847B0F9CE35FECB8667F90AF05F26C
+:103BB000CDBC0F06EF1FA6ED0BE48410A678CA6DEE
+:103BC00064E775F26E27466F0A3A5EC2D77D14DE4F
+:103BD000624B106F4BF9BB5C1FBBC72BB7468AEB20
+:103BE00074FCDC863EB40756DD42E78376F879CC78
+:103BF0009731EB6766F4E1B9A5DD7502CFE325687F
+:103C0000D798EBBCDBC7CE19D65F29C44568DF580F
+:103C100084E3235C45C9F5A5783AC9F0C4F212AF34
+:103C2000ADB59F87AC77D82F263DAC74BC3FE96516
+:103C3000FBE7261FBC7BD9891953281C1B849EDAFD
+:103C4000B46917AE2F2DFCE13A0F7C08BF4F6229F3
+:103C50003298EFABFE9386E74232861E269424AF5D
+:103C60004D23B19A4584FC8B77F8128196FF6A6BDD
+:103C70005F4777011CF31E7E0A8C3C77D73357D5FC
+:103C80005E992C7BEFEBC772908F035B906CBD2D20
+:103C9000F7C350D4C5D3187C5B0DB253821C5C5162
+:103CA000DB192E4CB6CB8476C238ED2264A79CA2D9
+:103CB0009DCF6C47D1D509F73FF17979F97791C359
+:103CC000631D5F06BC69BA0FCF3B2E9335D8BFFA90
+:103CD000B4704C9A68DE51B2D3356D743B0A768B62
+:103CE00009BF981AFE387CB78EEF1A07FEFF6E7C6C
+:103CF0004CD49FC2BF5F347CB47AEBA4B1E70B70A5
+:103D0000B9F05E22DD275AFAD9D1FF278C8BCBD7A9
+:103D1000913084BC6497A1C17E5EA9F610FAF77257
+:103D2000468D0676C0165A063B604B5F0FC6BF4BEA
+:103D30008B1FE806A22F4D7809C8833944CB384041
+:103D4000FB9DA3C970028BC8570E88104F279F2573
+:103D5000985F92DEEF65F708155EFE2DF0B7323200
+:103D600054DCCF48CBA8FC16337A599CD9843FAD9C
+:103D7000EA7835C4DFE57A1216002E214EAA80C9F2
+:103D80006611DCDFF01A07EF84F3024466FA09EFEC
+:103D9000D201BDCAE3ED9319C9906E45ABC73C97FC
+:103DA0009FC818C79A0C578551A22C2DCDDC09F05D
+:103DB0009446690702C0CFE26573A2623841FB2FC7
+:103DC0003FCDDA919FB17326D43759F38C2F8957A1
+:103DD00053AE4CE671F8D05A7B9C9A0CD339D3F68B
+:103DE000E53F5BB517E2149346C96FE6B77B399C94
+:103DF000E9A74904FA0FD6D9F58697E7797B1DF72D
+:103E0000CC54F85DF6FBA19DFEC35723A807DC2424
+:103E1000AC2A685FAC45BBC1F44B764345B0C70BD9
+:103E200008BB97D7D9BE92B52721E6A7B8BD4455A0
+:103E3000CBE9F7F55E03F312DDB44CF1282844CD4D
+:103E4000A1EF7345166F6911880CE5E47809CC473A
+:103E500070AB9F6907FBE5B03A0FEF4F33FDEA36D1
+:103E60002D8CF912A4A4DA66379B7961B796154DAB
+:103E700086EFE99346E24E1AD0E5ADD9C56847070B
+:103E8000B286FE1AE4ECB9ADE9CB5490AB90AF71B9
+:103E900039E4477B3B6354E9BBCFE611DD629FB950
+:103EA000E5468CB3B9CF4EB1BD4F34DBCF5B1B3E83
+:103EB000B106C699EA637C5845B476685745ECE785
+:103EC000AADD67736CF67AB2FF7CDBFB04B56BACE2
+:103ED000F7008DDD7F1AD14BACFD4F1BA3FF198E70
+:103EE000FEB594FD27FBCDB2F5DB21B3F86B2CE8D2
+:103EF0004D792FE5025F75311C951D6B7FA0D2C7F0
+:103F0000E29A5DA146DC1FA82694F129BD2C3977E1
+:103F10005262E77D09DA6F24DFBE3F50CDE958A435
+:103F20009481E70764FBFDC68B89F3BE63BB5DF438
+:103F30004B8839507C89FE8A41DC27F8930FCF03E8
+:103F40008E65370F36138C4F2F4E1BBA0DF6C157A7
+:103F50006ED3958E10E63DA33FFF37DBE62F033B84
+:103F6000DFBC07B32328225E22D593F13C97D94FBB
+:103F70004421D3412E46449607813F74FCC1EC5C3A
+:103F80005BBE86F9749E87AF3784C5C596790D42AE
+:103F9000FEA175BCA579BD92651E1137998FE3719D
+:103FA0007B7764BC499F6CBC633C9E658E57BFCCDD
+:103FB0003EBF7A45C3F9D5733E36C73B06F34B8106
+:103FC000DF09C7E3F99523E32DB7CFAFDEADE1FC01
+:103FD000EAF97DBC23E34DFA64E399719D2EA5B106
+:103FE00011E870ACF88E19D7B9B66BBF2DAE43622D
+:103FF000FB97561513B25360F223EEABEE04BA787A
+:10400000BFEED612D42BDCBEC67B57A93E5E293349
+:104010007857E4FBE22D163CEEA672C49809E72916
+:10402000540207CFE07C8581E72D42F87C94DAEBDF
+:1040300006E69794E0F7C79BC358DED7BC109F668F
+:104040003F250BD9FD60B3160929EDF6133EE67F37
+:10405000EECCD1AEFB12E8B72A2FCB0B5E78053140
+:104060002C763435AC0F7B607FE8F3A40C74E48CC1
+:104070005D0CEE60CDA438ACBFB76C60B019E2A0A7
+:10408000B24BC7BC583DF5DF3B78C5C7FC79B79B41
+:10409000B52757B07B525770FD44A43ACC3F5AB174
+:1040A0003203F31156AD36FC1AC5DB6A4178B59878
+:1040B000EB3B381FF539BED44E7F21089A87AE57A7
+:1040C000D090E2708FDCE7F25F5C23D07E23FE6B42
+:1040D000D1CF88D08699B49FCF717D5BF5869B4008
+:1040E0003C825CA5A0FC5ABDDAEE17ECF42434B097
+:1040F00073769605490B6DB7AACEFEDDED667C158D
+:1041000071DC13B362827B63CCBC5C277E9C71D371
+:104110009FF9ECF1D133A474079E0DE3F9BBCEF601
+:10412000661CB4DDC7E45B97C2E4C3683E60F0BCC4
+:104130000B7DA3FF7702E368267CB9725C00799F50
+:10414000D770C2961F4F118B46B5B94F40A4036577
+:10415000A8871DF3D92D1CC819EFDEA85C22FF6EBD
+:10416000A884FF7D0361F4BCDF1935EF452F15935B
+:1041700054FCC3E2C12B8E4AE1163D8917130FFF91
+:10418000DB7CB4CBC7F0F9D2D20F2A981F986FFB13
+:104190003B02E639AF6B47CA32912DF4BC72BD6267
+:1041A000307F75B814E8F2F8956961F6F730B81DFC
+:1041B00094F8A50876D0A7EFDF28B0E53FF37EC7D7
+:1041C0005A2F67DEA5E55C72F29E04C87F690987F5
+:1041D000D01EC81609F0532EE4E305D8F79376BB3A
+:1041E000D5968FD7D6BF5F80B8E1C3909F68398FCF
+:1041F00097D7D02774807DD71267718804AD47E1C7
+:10420000CE6F4808EDA5C9BC2FA75CCFBFC59E2FB8
+:10421000D8B168B5764087BC9AEA1EB8206CCB2E20
+:1042200016E732EB8FC4BBF83955176924704E433B
+:10423000F2B1787388DFDF31519EEF87624C2B2C0F
+:1042400084FCDEB85A45E7BF272BBACC4FFBED0EF6
+:104250009637F6027DCA61CC075FDB744F04E284B7
+:104260005A56EA38F85A6E1FD4FB195DBDEE4A144F
+:1042700040DCFCE5ACEA7A7F768AFA4D5FC5FE1633
+:104280008F712FFD7A3F8BCF3C2CA6960737F0EF2E
+:104290005FD820E27D431EE2C773AC9EE29E85801C
+:1042A0008F8737EE0EA73A8FB9508BAEF35BF0EEE7
+:1042B0002966F70510D27719CC73CBC78FF47D9799
+:1042C000CE3BF3631FCAD94C89F56B69BFDE3A1F39
+:1042D000B3FDF37FFA059EB37F9EDFBF4EC8F4E5C2
+:1042E0001067DF3E52263138E8BC3D839763E272A7
+:1042F000F02B93E5E796554119689412DFBBFE97C2
+:104300003AE1FE9AED02E1C43AB80CEBF3FBDE7F32
+:10431000C2BF2FBEE69D6FED007D50A9A0BFB99D25
+:10432000DB3B267CFFE967793FFFC9D7652C7C6EB4
+:10433000E3DF7D80CFE045E1735B2A7C7E26686CFD
+:1043400087F71EC804A120783E566F87BCECAF37B4
+:1043500093C897E81C1E0E1FDC0F678F68FB8752FF
+:10436000B5FF4196F1353FC27312E7E72FF685019D
+:10437000155B1610EC27051CDF186F5DCB33989C7E
+:104380004B4B67CF4C6E5F4AEEC110E42F6815FFB0
+:10439000709B46E54C67E1E09A5471E2A702CCEECF
+:1043A000CF18232E7E98E3EFEACCC8B701EE76ED66
+:1043B00001F4F7148144A0FE96854344B0B47B23F6
+:1043C000C0E897C2FD0CC0AD5CC6EEB1F653BC436D
+:1043D000829CBF82C1BF453F4E204FDE1F3A8E797F
+:1043E000ADFE8A21E4771485B98CAEC01F54B9FDA7
+:1043F00076D8FF26DAF5999249777774011D4AC974
+:1044000032D2656F266BFFFBC01D5DE02FEE516859
+:104410001B9083B90ADA37CEF9FD2CC0E6A768C62F
+:10442000518077143EDD43DF827B09B64F67F7B9D1
+:104430002C1607D7DC0074798D0FED33FA7E8DF5DD
+:104440005CFE479C7F3FF233FB6AFB9F54FCEE5CB3
+:104450008FB1E8F5246FFF09E8F5642AFEA5F4FAA8
+:104460005B786FA1D70F486A7A7D7B0C7AFD0F6865
+:10447000EFC48BB32C116317EC2BCB1F2DDB07FD87
+:10448000C99F59B4EBBBF4297DB42D86AB19166CCA
+:10449000E79E93F23EFA2718D7BC7FC0FC3B46CD7F
+:1044A0004008F353F4BBA07217C8B10BE8570E6471
+:1044B0008FEEF7653F8377F135BE68AAFB14BE1314
+:1044C00090D9F9D800AB3716DFFC3AC0F253C6E2F8
+:1044D0009B17381F50BE0906E64FCC3767927C9376
+:1044E0001FB820BE79089F9E62C63738FFCB47F3BE
+:1044F0000D89ADEB02F9DA59C8F862CEFD9B902F19
+:1045000046F82816C3EF52B28CF2DBE4A38FEF8F8C
+:10451000617D67FBC018F70656707E5AA845E60114
+:10452000FE8D4BB476768E6908CFEBF692E17E373E
+:10453000E609B3BC5C6F2C6630F36090C0FDB48BB1
+:10454000381EF6808F067E50258F67C98364957F5D
+:10455000343FFB2B1215D67B605EE1E3FBD2234B8D
+:10456000018FBD646816D86763AD532D1F4FC832E5
+:104570006A0329F87F223DB421C0F4D0063E6EE6DE
+:10458000C76A23D8A74E7E5FBCF1D93F3C3E4E3F61
+:10459000EB391CEB029F585FAD0BA4D6573704ECE8
+:1045A000FAAA42284AC9FFEB0329E407E5FF9B5317
+:1045B000E1E553F0FB9D8114FC1E095C18BE9FE5EC
+:1045C000F87EF653E27B176FDF13F8C4F2B62715B7
+:1045D000BE28BE7706B22F08DFBB52AD17C5F7D78E
+:1045E00003B8FE4F23FC7EDD87F1F2EE05E420F4F4
+:1045F00093028E5E6B3FAACEFAA13CF58140E97E24
+:10460000F147DDE154F724D176FB52B5AB0D683CA0
+:104610000EAD6F06FFE1E1CFF8705F81EAC703815D
+:10462000FF5EB97F28151D2C16991CF206167581A0
+:10463000BEFF14FD0FA492FF5FE57436915DF01A82
+:10464000A70B3AEF9F029C4EF9D7CBCF312B5AF4F0
+:10465000E500E26BE86A90577BEECE1420DE956FA2
+:104660002404F0138E723D560597FDCC4FB6DB2324
+:104670002704B867674FA326C079294B7FAF07B2DD
+:10468000C7EECF090785EF3730BE2FDD188276B52C
+:104690007C7E176B271DC934DE0AA0FE89BC0D4F36
+:1046A00063A65D6E9BF310233D2CCF7661EABF734A
+:1046B00079D42F9BF2FF7DABFCFF8F11BA62FD5DB9
+:1046C000ACFEA1F09DE3F0FD25157C4EBC4C04E74B
+:1046D000250199EBDB889A9E424F39FB33FDEC9123
+:1046E00075029D6489FB64A78FE8EF603AAC478749
+:1046F00088E7A8567079B2626106B7DB352FF4FF00
+:10470000308FC33F7CCB0355B0AFDE7BAF5606285E
+:10471000C86D607A4FBF650AC657A7F27E9DF08FBD
+:10472000B457FA66C1DF8FA0E34E83792C59441247
+:10473000E037A683DD80F10A0DFFCE71A6BB27040A
+:10474000F1D92D42CF9A75A057AFF6B17331A1D5EB
+:1047500013DC9FD96AA35B12AA98A07E0BD6D7D28E
+:104760007AF09E950BAEEFEE496967D5A48B9C9EBF
+:10477000A24BC6C56B2888712F13BFA3C761EB5727
+:1047800015691400DFFE0A4183D43B3FA513B0979F
+:10479000C4E241CC9BFA6C05A31742FD92F1EF698C
+:1047A000E934E15A0578FFB47099F5C61E8FD773C6
+:1047B0009CB718F97B643E26C7B0222DBF77342BF7
+:1047C000E5BE82F9EC6AD60CB832F93D4DC7FB1B49
+:1047D000BB46F2BEC3A155FEFFF97AC979C5597C23
+:1047E000D4517FE49E92908AF61FFE9D0FEB7D3D93
+:1047F0009C2ED48C482C1DE54A18EF89A4E5565808
+:104800000FA2D2B21FCBED58D646CA9D583FC4EA7C
+:10481000134DBB20BCD376DBB11F79A49F1DD88F6D
+:104820006F64DC9D580E8E941FC4FAF9ACFE858E21
+:1048300033EA9E964109E7FF816CA4C3BEE9E79B7A
+:104840006EC0F8D2754D37E1B3BB59AB82389D7954
+:104850005FC9E7AFBB41037FFABA2F3F88FBFA6617
+:10486000FF2BC1EF00FED7E55AB097944231F29882
+:104870002FC97F4938DAB1BC4266F7FEAF5C787A5F
+:104880007BBB257EA7C2DF4F87FC1ADD725F06491E
+:10489000CAC32704E37BE91741CFA3E749C800A5B2
+:1048A000DF0F7CC5F118D273B5968A6FCCF98ED51F
+:1048B000BF39DFB1E48D8937F3FD9662FEF7761DCF
+:1048C000F14BCFF41ACCFF59297038FDFCFE485E3D
+:1048D0006F051DE7E952A40B1DE87605F7EF9CFA7A
+:1048E000C11CF709217A02E804E2C4F7968FC6EFEB
+:1048F00085E2CDEC7F723446E0FE2E6F29C17DB19A
+:10490000A0DFDC576772ED219F598E617249A4B810
+:1049100007E59C4737E51ED3935A5A9F2196513F8E
+:10492000A887D48666411E6834047FEA87968FCABA
+:10493000684FB0321DFEE800DA3FDA6CB8F1516D15
+:104940003FF7A3A35712767411F7DDCEFD08F5B734
+:1049500059860B7C4B68D93B5236D4102D178D9459
+:104960006350DEC3ED3EA1E7DC8F60CF84EAE573E0
+:1049700056795FC5E5EA44F2F4BF00B9E905CA001B
+:10498000800000001F8B080000000000000BE57D88
+:104990000B7854D5B5F03E73E695642699BC270490
+:1049A000C8090F098A38090482623BE1D558790C9D
+:1049B00015359628938447782620D5B1D2322180A8
+:1049C000A0D886AA156BC509C57B69AFB6A0B4E5AA
+:1049D0007AD17F10B4D0521A2B55B4A25150F15154
+:1049E000938294A9D572D75A7BEFCC39273321B45F
+:1049F000DEFFEFFF5DF874B3CFD967EFBD1E7BAD6F
+:104A0000B5D75A7B0F6361C6721963DE1CC6C63107
+:104A1000761EFF7CB967C944BB366DAD67C268A816
+:104A200079ADBEA11A631BF15541BC5D89C74EED3E
+:104A30001ECD0CA67BCA199BBEAACBEA8476CEE219
+:104A40001C77D0C55891F79370257C5F349E310D4B
+:104A5000BF1D9245E3B679572A769842DB08E651A6
+:104A600018BD5BE381F6396EC6DAA164D60863230C
+:104A700018BBDF25EB301F28032511D601CF533596
+:104A8000FEDE827578AE3A58D34EA8A795307F04E3
+:104A9000EA1E079B1380B2D863610CE6E5F3A834E5
+:104AA0004F1F8E06F50CEF5AA6417B6795C51F81F7
+:104AB00032034B971EFEB5E23B2B95121FD7E6043F
+:104AC00047209C6D8C55EDC479B168A004E0481D69
+:104AD0009E937537D42A4BAC2B190CF9E86A1698BB
+:104AE0006B63ACC21348C3F6AED29CD4E008AA8F65
+:104AF000F2403FAE75963003BC54327744298EE3C2
+:104B000005669E1A7027A7C7CBAB838149B6E474AC
+:104B1000BBE12635A087439653100FF0FDC7D5EFB4
+:104B20007C1FC159EAECB2B34140CF219B034C45F5
+:104B3000783482D3B97B66B410DE2FDBB39CE17C82
+:104B4000D7A4A58F473A9AC77DF9B3073D01789F4F
+:104B5000F25747606782F196083C1F5D5D4DDF416B
+:104B6000F79A358FB13908CA204604ED7062C994AE
+:104B7000F30E02EFE810787F0BE3CC302B503B8D27
+:104B8000015EEBAA55A616E377DDEDD979A8DFD251
+:104B9000513B958D844AC876129F3BE1EF79E83707
+:104BA000C832A778E0716D983FA7F6F0DF3CE69B2E
+:104BB000920BDFD56F303D7FFD9AF7593ABEB79E15
+:104BC000EC2889F77F63756D6092687786FE1F21F8
+:104BD000786669CC8F749BE54B8B8401C4EB0337FB
+:104BE000052695C4FB7BE573750EE2C58C8FFF44EB
+:104BF0007CE4223E028149437BE2A32EA0D83DDA29
+:104C000085F1D2573CD45A4BA7E46A3DF160861F28
+:104C100030762FE2791EE0F9EEE2E4F88076448FF8
+:104C2000576E827600CA1475AACD0278A89FA93063
+:104C30008742F84D6783B19D7FEA64DD7CCD78348F
+:104C4000E3ABFE19E68B42BFF50FB87DC0E1ECF790
+:104C5000123F5140DA189027BCA91ECEB771FE1E34
+:104C6000F88B707EADA2F4F91C984770ADE2631C1E
+:104C7000DEB7F5F0D5B140465421B8DF4E42F7B764
+:104C8000F5709AE7679E7F0A0A2B907FA1D78BBFAA
+:104C90007340D78E59A323029733F6538F3BE7DD3A
+:104CA000CBA03E92F9CEC3BA3ACBC6678CC2F743CB
+:104CB00012CBDB73ABB5EF1CB0E9D739E7B339A141
+:104CC00099DDE362FF0A0B76D73D80E7C04DEABD70
+:104CD000D7C3BF5F3E98BD0E9FADF0AADAC96CC4C2
+:104CE00017C04BF4F23326F98B6119DEA702FE667A
+:104CF00032A7E6827EBE0C42EA3CC032DD9FA2B9FA
+:104D000074709C6E55AA508E02F132665D1E87D774
+:104D10003CEF155E3B8D07FCF8899E1FCD7879B975
+:104D20007A7006CA9117112F69849791178397AFEC
+:104D3000E0628675E3C9665105E8DCA53823DB60CF
+:104D40004E35A13B039346215E58D80EA2F35D4F2A
+:104D5000B190D31C6E1B937F9A18CAD31A3B0B22B7
+:104D60005CAFDB58F52E1796D101653AB9F57E7622
+:104D7000E5BB28A765BD26F46DEA1F1891F850F22F
+:104D8000F32D4E5754E57CF85137DF903CABF120C2
+:104D9000DD814EEC3CC0A9662CD1106E352D7D24F2
+:104DA000CB606C033601389D9981D328FFD5B4813F
+:104DB00011E4BFD49B7EB481D3F1BEAA1B74744CA2
+:104DC00099F754983AD7B20CF84F13F4AB14F44B4C
+:104DD00029719AE9C7709D864B58E43145A000EAD5
+:104DE000A787F823B86E93E90D49CF9412EBA71D5E
+:104DF0007ABE66AD8457494776607417AED7A0D7A0
+:104E0000CAEEA6F725849FA047E2A7CB86FA644E98
+:104E1000C8765ADF4FB0606EA419BFDBE8F0E1B38B
+:104E20003A8B9687ED004F1ED4E3ACC4E7C3F5C3BD
+:104E3000C2F09DE427C42B1A13BAFE3B00868232CF
+:104E4000EC0FA4277EB74137CEA09EE376AF2B733D
+:104E5000BFA6EF5415EC07B2237C3E9F4E7E0FCECB
+:104E6000E4F6C369EFE89D9641C9F157E7CCF65BDC
+:104E7000B3E3F5B70B9CD591047A40F627F5799604
+:104E80001AF45A10B6F063070FF4473DECB9142436
+:104E900019BBC71639787000431661AC1FFE2F721C
+:104EA000D0EF22BB43D4813161FE6DA9DD75BFD344
+:104EB0000BF541DDF530D6B7C270EC4AB05B32235A
+:104EC00007D7C27CCE1D7790FE3A5D951AC1C59377
+:104ED0001D9AC84EC0BCAD60E66400AB4111C6D29D
+:104EE000192A2478142B600EF09DADF914C4F7AC88
+:104EF0004C8DE66FD558D40D93CBB6FA14C4D7F7C2
+:104F0000ECAC41C88DE13375F6CB2C01AF1CC7E189
+:104F100064E194B278BF606135A31EB14E65A457B9
+:104F2000609D93DD26D7B7EC2798C9F567F7FABCE3
+:104F3000F07A0E662658CF872D4D6F7E0BEDD95F28
+:104F4000ABEC3100E566EF1DF4FC86503D953785EE
+:104F50001652B9488CF70E0B2ECA84B2BDFAA59B27
+:104F60006F07FE6DDCEDF0A15A5E7ADBFBDF29D71F
+:104F7000104F4077FC6E5EFD03E5F0DE3ED442F656
+:104F8000EC8601AC1AF9C9DEAC907DB451B357ED93
+:104F900086F2A18CCA2D993A381ECA98447556A536
+:104FA0005990CF5738399F9F3B7E97B70EED4A9760
+:104FB0008BD68BBDB9F8BB16A8B343306F86F2838E
+:104FC000919DA13A78797726B753EF16F85E93C989
+:104FD000ED3D670C89CCF9BA09C6775AC30CED6C64
+:104FE00067CC4ACFED0ACC2F019FCAFE9C3158A452
+:104FF000A3703CF3F7767A8E70E1F76A3633D83DCA
+:10500000F7E1F7B958CA79A4F179649BFB49E7CF76
+:10501000C5FA33CFE34F9E890F227E1ECAF06FC9B7
+:10502000A475D36143797E8BEBD7C794917D91C7EB
+:105030001D0ACAE3E99F29D122C05F4AA51A595324
+:105040008C7ACD336D34F001ABB4F9109FED43721F
+:10505000DC8374E3FF44D0FF45ABC78DF30C4C06F3
+:10506000BB9AF89BE5CEC27E26D78FE1F20F0C2EBD
+:105070009D9E7D51DBBE6110CADFB08DF64B739CE7
+:10508000E108CE4F67B729E7B95CD6AC63E2F6DF3B
+:105090009C49AA3F25BDA77D07DB900364FF4959C2
+:1050A0001E863A7CF786A8BE39E9CCF5084607F398
+:1050B000D807E9ED41DC2D8D41FB86FF991332DAEB
+:1050C0007D66BBB0AEA2F4052003E02552351AF987
+:1050D0006CB885F8ACAFF632639B399D27B7787012
+:1050E0005FF528CA09A84F9F746212CA8D19605AC9
+:1050F00061BF3326A99E28B4DE14B2303F4CFC8831
+:105100005F8D2800DB91928E435F46BC55D834D228
+:105110005B25ECDEEB72F0FD280FE23920EC106825
+:10512000CFF59BD719190ACFDAFD275CF53ABE3BBC
+:1051300052716238EE5740EE3524E227C69A89AFA5
+:105140000F7C3395FA79F37E25E280F94F563FFBC9
+:10515000ED58B467BF65F3393402CB82749DEA63BE
+:1051600062E3EA774DD6D9012758600CD995A5C7D7
+:105170002B1D68BFAE53689D4AFCCF0919EDCD6069
+:1051800013D8655A4FFB143AB3233FF7D53E35DBAE
+:10519000579F650A7BB38C95E9EDAA647A4ADA5584
+:1051A00056E657B3F87AB2A2DE9D0E0F12C9819A65
+:1051B0000CBE0E26AB1F117D4E57A81AE2EB48E835
+:1051C0000317EEC78F7CA6F27DB03FD760C715648A
+:1051D00071BFC0563B1864F0DDD67ECE483374B53F
+:1051E000EF9B97E677107DB407C7231D7F6D2339AA
+:1051F0009C6CBEEE90CA8600634E0B29544AFA1589
+:1052000085529855A71F8A58E2F95F9AC5F7A1B948
+:10521000AB9845837133C3CC9F687F2CDBC1BE78CC
+:105220008A9551FB6826CC6FD9100BF1A7DC1FA71C
+:10523000D8C2FE4280DFB6777918F7C945303F9C67
+:105240008706F3437D591C4AA3FAA0503695834341
+:1052500099540E0915D2FBA1A1C1545E122AA6E7EA
+:10526000C3429751BD24348ACAE1A1522A2F0D5D51
+:1052700045E565A037B1DD885025959787AEA5E750
+:105280002343D7517945682695BED06C7A5F1AAA18
+:10529000A7B22C544BCF478516537D74E856AA9776
+:1052A000879653392674279563432D5456849AA9BB
+:1052B000DDB8D03D54BF32741F9557853653393E03
+:1052C000F430BD97764BAA588FF768733DE8EF002E
+:1052D0000ED7908F93ADBB85595C0FBC98E99F8921
+:1052E0007C27DBD92DA0C75D3DDBCD136526D235EC
+:1052F000417FC12CCE971FFBDEFEFE3016A7DB469A
+:105300006FEFFE0C56D237BF57208BCBAFADD676A2
+:10531000BF8AFCDBC47C6178346DF48B0ACA973693
+:10532000CD5A95C8BE7B28CB46E33E9A196CCA82FB
+:10533000EFD38A4F1E40793223ECF9ED04E4971144
+:1053400039BF9E00FD15ADB5D0765F639E7DE85FE9
+:10535000D32631928BD2AF04769D419F6ECE92764A
+:10536000E3CE8383683D0D29E3FAA7E31A5C5FF679
+:105370006F0EA2FDFB567B54B1A27DB38231BDFD01
+:10538000BF757DDDBFE1FB787F7C7D166D60CFA1B1
+:10539000895DDCAA4D488172F016FF7329F0C9D0EF
+:1053A0004870422AD487ED083F87E5F09D9109694E
+:1053B000505EB627FA1C6EE32E8F764C7041FD8A44
+:1053C000836C3F2EFFD2766DA21BEAA38EF9F70302
+:1053D0001BB0F28EE0C4740DE713694987F96C7D48
+:1053E000030C3DA8577CD4AAC276284E7FB0E3D0E8
+:1053F0007E9374718F6E9F940DFFECBFD253AAE21F
+:10540000F7D68E94CC113DE9D38670239CA0471E1D
+:1054100003B8FAFBA38A47C727CF08FE003AB42196
+:105420001DA45FB26D6D16F925DB523D953864D72A
+:1054300064E6D9A6211F5B094FF67583C81F27F9BB
+:105440000EF06BB067370B39B1B5DBDE4D8CDF6723
+:1054500010BFE5FF3AF89D9AC5D74332FC3A915701
+:10546000C65D781D1F117C08EBF8D788D764EDCE98
+:1054700008FC9BF1DC6661074157C1B8C0A77C5DA1
+:1054800031F4A37D2CD6FB85F07AEA5F0CAFCF0B0D
+:1054900039910CAF4CCB213909FC3A1CFD63C9E4AE
+:1054A0008D5DEC67CCEF3F17FCA69373DC6FEB01CF
+:1054B000393738B99C3B7421F925E48CDDE4DF49A8
+:1054C000CDE6E3557802CEECF2047E6A1137907E89
+:1054D000EAA9AAA712E50D1BC6C88E4E1B1109E347
+:1054E0003EA528AC95A9D80C8532E2B15F09F91F19
+:1054F0008AC1CEB002FDA1AB28964ECD63A943FF71
+:10550000BB5C6F9E5AAF7EBD497D1F5F8F922FB2ED
+:10551000DAEEE67E496D26D82FD764737E8BF7C30B
+:10552000FD20EBEFE8D776B74E0EB679BD5497ED78
+:1055300093F1EF02F1BE6DED1AC2A7737C62BB61FD
+:1055400062B62AE441971FF93CFC25E6417B2673AD
+:10555000EDDB249F32413E29249FF8F8FD43A9FF4B
+:105560001686FA84EC3C21CF3DA937B8FFDFF173F2
+:105570003EDA54A807C67BF6A918A7013DA4E13A74
+:105580001D0F731F8DF8B213DD35C6E9A88D6711A5
+:10559000B47B016F51DCB7872D6EF233D9EDAD7E50
+:1055A0005CCFCC9E49F057788233B37B91379E34E1
+:1055B000AD14895A97BDEB1A17F0DFFA624F2AD65D
+:1055C000E7407D53058C9BD5C1447DA36BDC3FEE4A
+:1055D000F7A8BBEF6787D0EFB13FCB1FCCE67C5D70
+:1055E00087A57F98C74AFEEA3EC6C1E4FA8CAF277A
+:1055F0004FA95C4FB523481E2EC17E657FC9EC9B29
+:105600004BB2B99CFB56B6C5C0D73DC76D36AFFB94
+:10561000BED93762BE8BB37B5FFF2F1FBC6FCB76CB
+:10562000A6F337F6FB7EBB55437F06F7D3589CEDB8
+:10563000D49F5BF81BFDE86F043E700EE175FC9390
+:10564000C85F9C1C8F119AAFF4334A7F62BAE02B7B
+:10565000665522A8C7D32B3CD63AEAAF837D0DFA14
+:10566000FB81C0935CD728B79E1C817229CB8AFB33
+:1056700075F427B9B3E2FD633DA32C2E9F98D8C7DC
+:10568000DD2AE6DCBAC697812EE7F011EE4769FD08
+:10569000365F97D3FAB3C81A94137EA679A07D0A11
+:1056A000937FFC067FF2D44F15E687F91FFE54A5C1
+:1056B0005219C2A26ED8EF4DF32951DC07DA2DCE74
+:1056C00008EAD2CA7E4E86F14D7BBA2582F111FBE3
+:1056D000DB0AC1692F4B8BA0F09BD4AF2203E39868
+:1056E000670EEF770513D0FFC660ADC1FF65C663D7
+:1056F00077BB9B9FF7201E1FBE409CF65076779C81
+:10570000767F36DA4373BBD6DAB5789C56C61F0B64
+:10571000BCBB3756A2CA5AC2EDD37E2CD2ACB7ABB3
+:105720007471D0DF22BF3F1C8F83B65FA28F833698
+:10573000F6DB8BF6EE43DD71D06014C7F567EF2C16
+:1057400045FE7DD8B7FBC7DF457C3A44BC62D471C7
+:1057500097867EFAF2FDB908CF6F4DF397A5F4E373
+:1057600099F7C1C7B38DF18533BEEB32A2C45BD9C3
+:1057700009D7B7F42FCAFD30FA0F3D09D7A111DFC1
+:1057800072FC1A85EF6B994DE1F24FE851902F9D15
+:105790002407228CF4A6DFA16C437D73C637CA4769
+:1057A00071CF24F246CE07F0383451FC17C64B189F
+:1057B000674DC9E17AAAC6C6FDA6CAF2F2269C5771
+:1057C0008DDBA53874FEFEB342AF9BE3426AC66729
+:1057D000E541E1F74E04BF39BE7356E80BC497DECE
+:1057E0004F7E217C1DB3B552FCF0D83C9535433F2C
+:1057F000678263F35982EF65F91AF2CD50C6DECCA9
+:10580000E1E375D33349BCE8D8EA068A339BE36900
+:10581000DDEF6B53AA517F57231E75E35E29F077A6
+:105820009D289923A879E0BDBDEE010FC3F8D7D01C
+:105830004FCAC36EF48B75FD1CE317EC5B6EF25719
+:1058400054D79E2D6FBE5C87CF0AC6E3B3FB1FF211
+:1058500068F0BC7AE8DADCB02B391ED1B78578BAAB
+:10586000071F8C237F4C79CE45F863D8081E17623A
+:10587000FB53287E9AF207D58776038ECBF500F787
+:1058800027AF147113731CAF3AB4CC205FD2620AF5
+:105890008BE8E21769D69DE49F4D8B59E9B979BD34
+:1058A000E5E774C73969BD49FC27A3A7C4BFF979E7
+:1058B000590EE7CB63B50B35F41BDA5313DBC11B71
+:1058C000453B5937E723248BBBCF17743D131C97F7
+:1058D0008FFEAA6A7B78685FD6B9C4CF85F21CE6D2
+:1058E000E4707DEEBEE92511C753D7626F52AFA6B3
+:1058F000597B8FC7FA4DF1D8B4D13DE279FF23F13E
+:10590000D8969C7F2C1E7BADE0DB0BE5A1DC6837D5
+:10591000DA3DDD7815743C134C6161908FB756AA5F
+:10592000148702FE20FD78EC0185ECCD68AD83F490
+:10593000727D6D0AF967EB4B557A5F7FAF4AFA3398
+:105940000AF26109C887DF0A3961F6CF5632C510FD
+:105950003F9F3E3AC550BF69DE7DBF5D8DFEE50AC3
+:105960009B86E31DD1B8BF39EC57C97E853E7C517B
+:10597000F44FDF7FB50FF599E487237E95D65BF86A
+:10598000A8EAC361DB853FFAC886D208E6A93025BC
+:105990001EA7D70663FFF514077ED5BB85E29C29B9
+:1059A0009F3F1808D0FE31A89592DEE4F1D314B1E0
+:1059B0004E27F6ABB801F5F89B9B6C0CFD466FAE1D
+:1059C0003A43EBB9637513E54548FFB2F40F9BFD0D
+:1059D000CC66FF720FBFB2C99F9C2C9FE15749F85C
+:1059E00043CAAB64FC0162EB484EEEC5CB31293FA4
+:1059F0005E13704EECB7E5DE66C043DA5C95F020CE
+:105A0000F9F2D5CFEE7A04E5700AF0C71A86F8FCF1
+:105A1000F7E7711FC2162A09FDC81952AE63FE448A
+:105A2000499C2E37051776D771F9CF6E586EC8FB93
+:105A300030EB95E472AD77B9B53987DB5D66BD6350
+:105A40005E0F5FB4DEA9AE7DA004BFAFAE9D17C1EF
+:105A500072633F6703CA5FB37C30EB896A939C8DA6
+:105A6000EB07954546E9E7AD51BBB89EB0D3FB7354
+:105A7000293CDF21E4E4E5EDA9E9DBB03C97C2F382
+:105A80001DC26814A29DFA465AA485F6E54D63919D
+:105A90004F42CCD7114638BDA9E44768EDCFDBA90A
+:105AA000D7A472BBFC4025C1AB4AC37C6D25AD9B1E
+:105AB0001601CBD6EC60512ECCA7C56F49C1F8C2F8
+:105AC00044B7F510BA5E5A27589883C5F115CF0B25
+:105AD000611E05BEA7770AEE3F4B9DF6C164A70E77
+:105AE000CB457EF936EC0F81EF0F1F5677B701A833
+:105AF000877DA33212D9E9B234C7918F7FE39581B4
+:105B0000B86EDF61C1B25C8A1FD7DF8BF1E1C63DA1
+:105B10002AC5976EBEEDD54BC8EE36C529D574673C
+:105B200009FA535A94541FCA1389C77D6E3BC99909
+:105B300096E369B49F68794B117537C94389F703B8
+:105B4000D0AE6034E62AB9496E4AFC035C13701E7D
+:105B5000920E952C7A787CF13F05D734C47772B8D1
+:105B6000FA7B487E209FA9713854B795E0EB64A971
+:105B70003E9C5F48F887D8EB69B4FF93746E14FCC1
+:105B800028E9BC4CD0B973EFD9EF5C05ED5BFD594A
+:105B90001475500730C243E7EB6EE21389070937EB
+:105BA000F0451DCE53C2BD7FEFA86341FC3E3D953D
+:105BB000E2F8D2EE9679073DE494D8BF2FCD55BADE
+:105BC000ED5EF45FFC3E7BC2D2DCDC04ED85BD0BF8
+:105BD000F86EC2712B3DEC93088BEFF392E537AC76
+:105BE00012FD77F773E1FC8655B989F21BFE717AD5
+:105BF000DE7531F46CB4BA362819717CCB7D332D47
+:105C000069ADE7FA37AF3F490F65EFBEBF621CDFF2
+:105C10002C176E579B9802E3ACBF9CAF4BB68A69BA
+:105C2000941F645A2F17923740FF6D085732B9D32B
+:105C300057FA3FD193FE4FF446FFEF65077E86EF9C
+:105C400071A8C232DA17EEC23ACA13FB201A8FF8D3
+:105C5000B62B93513E9BCC8F91F3917932514C5A94
+:105C6000CDD5E5E194F814D4137DE08FA87E7E5F56
+:105C7000007FFCA6773916A575BA54D07FA9CCCB86
+:105C8000D8DD7B5E461FE8F75A22FADDAEFABA820B
+:105C9000C57DA7DF3B3DE9F74EEFF40B9EC2F72D24
+:105CA00076F609D9EF15B55EE4970A8F7F16E6A15F
+:105CB0003CDB2CE44E31D00FDE3F9FA3925CFB1EF9
+:105CC000BB94E4F6972C169A6F27C8EB6D4A9FE0B9
+:105CD0008CE5D2FE2F6CCD827E6FBF8E517CCFAB18
+:105CE000352B58CFD7404F6B7D8757CDE37A5C0774
+:105CF000AF9A9740AFEBE4953D8FF3E74AE44FA7A7
+:105D0000E6B1F626AFB2F28C76421FF8312BEF8B5C
+:105D1000E5C70179BDCAAB8BE6B36138BF6472A237
+:105D2000AF79A0B04E596156CFF119F3515CAD3245
+:105D3000DDC9F5F62E45E8F1D220D5DD4E12160765
+:105D4000849E3FBD9BBF572724B62B7D7959C4CF76
+:105D50004B772E0F580DF924617AFE5DFF69CF1045
+:105D600015F3B45D044FF634EE8794F0CB3CED743C
+:105D7000014FF6000E77F6719ED72EF1952EF61B89
+:105D8000191556C33E42E2ED7635A0A01F3D33877C
+:105D9000619A04EC134628E8E7CAF41BDB4B7CE766
+:105DA000B24D7F5631E5ABCAF83E17F73323F1BD4C
+:105DB000EE7982FD2BD0A704F3C766E709FF839D28
+:105DC00079511F31B5A6573ED2ED4FEAF2FAE0679E
+:105DD00069C8B3887D8351EFED4C6109FD0C7F11DB
+:105DE000EB01EC15F237AB42CF4DEA28A67C9715B4
+:105DF0006E8DFC0FAAEA734E2DEEF97DA61F96B7A5
+:105E00000E1FD955A94CD3C19D1BC832D4F3ABFB8F
+:105E100019DA17040719DE17365C6A783FA0A9CC97
+:105E2000502F0A5D69685F0C88D5D7076FF8AAA163
+:105E3000FDD0D6AF19EAC3B67CDDD07E78A4CEF013
+:105E4000FEB21D8B0CEF2FDFB9C250BF62CF370DF2
+:105E5000ED5B841FD98C97FFCCE372BBC5CAE550BC
+:105E6000B3AB8CFC9B2D2EA37FF33E81FFCA8CF13C
+:105E700025E8576F79BBB404F17D20FD4AF2B327C2
+:105E8000E30BB35C4B264FCDCF9F14E37DFC9CDD31
+:105E9000827CBD6C3FACDB2BA0EE7A6D3DC2B47151
+:105EA000048FCFDA18CF1792F11AF97D77BCC6EAC2
+:105EB000E3FEDA7417BB3B015FDC97A725F4A74A22
+:105EC0003E4A8637C98F17C2DBD302BFFF2CDE5E86
+:105ED0005778BEAB5E1FEC4A30AF337916115F0EB8
+:105EE0001E15FA66742A59F21E5A8F17AB0FE43C3E
+:105EF000401FBC9997DB334FF7E3EA97E63FA86171
+:105F0000FBF9BCBDC557827449E64F3F23F0A6F3A9
+:105F1000A737707F7AAA016F6FC9F56EF2EBB5A44F
+:105F20007F4AFEF416BBAFA42FFEF4B7F218E1FFD0
+:105F300069A473AE8EBEC21F9F6C1F1562EC109ECB
+:105F400087602EABA6DF3725DB1F4B790EFBE312F4
+:105F50008CD3B6E2FE4B49A80753F2CB69FF4CFA4B
+:105F6000A015F4A083FC04EC9006F5DB275AD8DDDD
+:105F70005A1C6E69CF3B98CF695789AE19F83DFB23
+:105F8000365B99A27E21FBCC7EF917A1E7D985E388
+:105F90007D64A74D03F8D7E8F6D7123FE6F89EC414
+:105FA000CF341F8FDFAD03FD88F1BD7DB95C4FAFEE
+:105FB00083FD37E2D1931DF00E447B1E9E6F43722A
+:105FC000E48EA1F523F16A8EF3F555EE8CCFEF61E7
+:105FD000B78ECFEFC56E95F0AF10FBE7C9EA889D8D
+:105FE000E8C73C1DB313DE54C6F32E1B0FDA5884EA
+:105FF000E8C8F397251D6DB1F5EDA89F6DCC9CAF5A
+:10600000AC6520FCB683FC9C18CBE1EFC3CCD98CEB
+:10601000764F4685517F65FA8DFA2BBB2ACBA4CFEC
+:106020008CFA2BBFDAA8BF0A8246FD55D85066D23B
+:106030006746FD55149A60D26746FD3578C3D74C44
+:10604000FACCA8BF866D31EAAFE111A3FEBA6CC7E6
+:106050000A933E33EAAF2BF6AC31BC2F8DDE6D7860
+:106060003FEAE0F70CF5F2F61F18DA2F38F414E5E2
+:10607000F58C3DB6CDD06E5CC74F0CED00E1ED98D0
+:10608000FF3D9748C2D855A79E34BC9F2BECB5ABBB
+:10609000BB9E36F4C35A791E7718FE22BDDE6341DB
+:1060A0003B1A2956D6F54221D0755944F145A1D95C
+:1060B000C23DBBC6E03C3E7CE39A83D8CF822DC66E
+:1060C000FCEF851163BD910DCA40B9D0087C110168
+:1060D0003E598C79E13AF9B698358973817DE3B3FD
+:1060E0000587AE63944F1AF6B763DEBB8453F29B09
+:1060F0005FF09B9C9F847731D87F512D0EA71FFEA8
+:10610000F2FD66871DF976FE1E85FD40E9094FC345
+:10611000DECDEB0B13C06586C36C87FE47BED13F57
+:106120003E597551BCE0F451D5C7FD8DC675B8E236
+:10613000108F13AC7842217F9D191FD23E4D8617D8
+:1061400035CCF70D8D392C12D1AD3F4DE0C3E13583
+:10615000AEBFD3F80F9CCF0FD508E61BA568A96684
+:106160007E1B13653DF19C56625CA7663CBB7DFDC2
+:1061700012F295067F711EF3C5F943335F99F1BEA4
+:106180006CCF663BCAC38BC5FB6BF989E312A0EDEC
+:1061900046DB13E4D749BCC2BEBD03F548B2FDECF3
+:1061A00047F917BD9FFD28FF8BDDCF9EEB4DCF75C7
+:1061B000A2BF0DEC4BB39FCDAC8795BDFBFFAAA44E
+:1061C000935FBBC381EB2EE873F23C18939E2C299E
+:1061D00031E8C9EE7DEFDB0AED7B7F91E1B77B61B2
+:1061E0003EBFC9F03BBC00E72D197EA757076F0BD8
+:1061F000E085CEFD809EDA95C04E9CE495719700B7
+:10620000F94DD655F2F6E67623BCFC9CD1BEDC31C6
+:106210005EB23FDF2AF592FDE91ED3ABFDF95D11B9
+:1062200027BA07E39043E3F941F78A780D2C3B3F07
+:10623000D26D9D2DE0D5E70F67783369BCF4714FBF
+:10624000B6631E758BC7E251342C793EF75A97B569
+:106250006ABBF82EC7F01D3FCFA422BE01AF5697F0
+:10626000F5533DDF4EF232EA37199C93BC7C3F690F
+:1062700063C17BD11E92F161DBDB954E94772DCC0F
+:10628000EFE172D2E7D1E77FD8188F074F10F161A5
+:10629000F95CF5FC637958ED19C189DE047958770A
+:1062A00064F827E1F39035EC40BB33E44CBC2FFE9F
+:1062B000AA97AF139B80170C50E22B9A877AF1F1C3
+:1062C0001FB037AFC7716F57C39427D9E21E53125F
+:1062D00074F5DDCF15F4F6B08F82DE5EEC23B04F9F
+:1062E00067E179327F463F2B6D3BACBE12C4F706A7
+:1062F000FCF738F2D32EC0EF7BE4BD8A73B8B08FC1
+:10630000EB358F57F6B33FCBBFCCCBF30D9BB03FF4
+:10631000FF30CF5A55D74FFA05FA917E8E3EF8AD31
+:10632000BEED4DEC1F3D85FABDAF78DCE8EDE12F09
+:10633000DCE8EDC55F78EEF8B00C8C674B7F97B961
+:106340009D3C1729EB1B328DE3AF2FE3F5FBC5B85E
+:10635000AF887B3A7688BAD3745ED43995D13D1D27
+:10636000F29CA9EC6787D74DED9BB327ECC0F9AE43
+:106370002F56681FBA3E5331EC47EBBD953B900E4C
+:10638000DB44FF3B907F73296F94FC39E63CCC25BE
+:10639000A2FD12EF042AF15C2BCA31BBAA26C4E38A
+:1063A000135E3EFF5999BC5FE977AB7F4011FB2735
+:1063B000E3BD08B0CE5F4E03F97362938DCEBDCEC0
+:1063C000535DEB911F93DD73503B2240F94FFFEC7F
+:1063D000F931C4675A564FBDFABC37F1BD05C9E45F
+:1063E00088CE9F76D87B11794B1DA99C4FBBDC2EA4
+:1063F000F29B9BDBBD2BE8B349F83550AEA37EC9B9
+:10640000525953223DF3AEC0FB3F7EAE99DFE79178
+:10641000ED72D177E673CD1DF68E75F938DFAB15C9
+:106420001F9E5FC8AFF1ECCBCFC1738C1AF9F8D6C1
+:1064300017B3F40A7C5F6AA1F799B33CEB6D98F748
+:10644000AD31CCDC673618C70DE3A4171473B8C29E
+:10645000D7EDCB8776195A171B3482CE7B4FF1E2EA
+:10646000BAADE6F9F33DF02DE49B6B1DEC2F101F48
+:106470005AE23CF4F342BF80BCF93BF26BA5C6760E
+:10648000F373593C0F16D992F2157D3C5F3B0DF327
+:106490009D06737983EF95EC89D682DCF8FA520574
+:1064A000BECDE7B9D30BF8387D3DCF3DA326F17CB7
+:1064B000871770B88E67047270DC19E39BB93FECE4
+:1064C000B3F3E7D531681CF37502DF33F457A4E466
+:1064D00070399CA26924979947A13C57A7E66BC0E5
+:1064E0007A8AEB4A8F8A76B283C725D95C0BC3FBC5
+:1064F00055268A7EFCD54C79B784FB65B99CB5B22C
+:106500007725FFAB02396350CFF23F603F6D4A03FE
+:106510007826BA0E537C32654853259E6B787E0EE2
+:10652000EFE37B49CE0DC8F3EEDDE7FAD98F0E1B02
+:10653000CEF5AF7BE4F0C1AB75E7FAC38F1CF68FE5
+:10654000F8C7F3DBA73CF4C8E1B5AEFFB973FD5261
+:106550009E1D5383C7EE04FC5F0F4C152AC3D2CA9D
+:106560006A88DE5EC2DB2C81E7F0A78067671CCFFC
+:10657000D7EF3D44F83B668379C3F8B6091CD5B61E
+:106580006F66445A482E4668DC1B9CAD9371DFD978
+:1065900069EF1A89E3763EF3CA8030C893E3DF3AA5
+:1065A000E366C07F6F5ABBDCF8FCD4AA97DC780F97
+:1065B000C2F1552AD96B742E5A978FD420F8EA5716
+:1065C000058139C85773567F3E466F8FB3502EE909
+:1065D000DF85119552AFA4FC5BBC234D301DAF2F5E
+:1065E000DD996DA84BBDBCD491F89CFAA3059CEE37
+:1065F0000B1F6FB3176A387E70398E7F4AE4379C61
+:10660000DAEDA67D989C4FDDE3A576DC77BEB9D7A1
+:10661000C1A2E4076EB731F267F9A72A79788F1122
+:10662000FF639EE70BCFA6517FF31E50C9EF540BBB
+:10663000638500AFC1BD0BF93ED804C7BCE3DA14D3
+:106640009457F3362A2CACF1F6ABF0FE8CD05D14E7
+:106650008731C369D62F0B92DC9FB360EF3DF4FD09
+:106660005CE6BF07EDD979ADE6F7D7BC874CBEE055
+:1066700002F19CFB0B84DE19C3C69E1F4CF1A38C58
+:10668000CBB50BEB9D53ABF922FD60B593CA8F568A
+:106690007BA89C53C0F978F19E7D2F14D2326F1FD6
+:1066A000837AE9E583F5695FD7E276F798B65BF719
+:1066B0003F4C4D8DF9993502EF63455EE60271EE70
+:1066C000A1FC58EF799935888F913DE72BEDEC1AB5
+:1066D00093DF57DADD667C9C3E38310DF9E3970590
+:1066E000629F3B16F0A2FEF37849F6DD5295DF9BE0
+:1066F000667E2ED7D11CC1D773B7CF5CDF0FC66FB4
+:1067000079E6BD811DC4A7DC7F512EF055EE5ADF1E
+:106710008EF0973393DF30CC8E321D3F033FA9A814
+:1067200077CC7C2BF9891DE5DF3B855FA39B5FF769
+:10673000DE4BF8957C85271D2C68C3B1A8D7527114
+:10674000E17BAEE6B51AEB1FDB3A06A23C5960F2DC
+:10675000377CAC24DEBF1D2A1844F898ABF9A7603B
+:10676000FEC53C1658CFFDF3FC7E9C53D6D617EEE3
+:10677000C475BE9DAFB3A5BF7CE21728BF16FDEC64
+:106780008174945FEF5B5BF370BC258FAD4B4779F1
+:106790007FCA1A4EC7EFDF8FA809CF115FD24FEE25
+:1067A0009FFD2ECC535B46AC06FFCD0D4F47F9F94C
+:1067B00097C76C1EF4C336EE70441D808F65BB39DD
+:1067C0001EA1FE16AFDF45F86ADC635C978BFEFD09
+:1067D000813C8DFC01E14281BF4214E1CBB6DB2854
+:1067E000AF75D951D587C334B22E82CFFC3DCE23AD
+:1067F00006746BDCA9D6DA337ABE074BC88EEBADD4
+:106800007137A767E36E4EAF46931DDA20E4B69961
+:10681000FFF3FA097920F81EF0437E35996FCB22F9
+:106820005C7EB7FCF8C1916FC1FC3EDAFE9B7465DB
+:10683000449CFF196685023D4EEFAC9F63EFE5BEB9
+:106840009E8FC53AE9D60B420F697B6062F950DD35
+:10685000CBCB25B668FA558097256D365F181E2F6D
+:106860007942F5BBD08E7AD541F74F2C7EE2F9976D
+:10687000AF84F92DDE65CB99CAC170A1FC96F46A8C
+:10688000443E2F8BD367D153CFDB314F139FAFCA19
+:106890008AD369F1AE7D76CCFB34E373E2CE7D76AC
+:1068A000BEDE4CF4DAF9D614D4DB2D3F3E67477ECA
+:1068B00078FF5985E517F7FCBEA1EDF9749433888C
+:1068C00027D42F926EDD74EC41BFE8F4A747533B09
+:1068D0000FC6792E44C7BFE019845CE2F79F3E0DD6
+:1068E000F36878CDE1433C34FCF4D67484E73D6B27
+:1068F00013E7FB47D6E5A1DE6EB085F33C54F2E723
+:106900000D5BBF41FCB8E0C56FF0FB9C98BF00D7A2
+:1069100033C05B8070CEFBE1F504E77C16247E6C0F
+:106920007884DF6F78D6CAAA12ED07DAC4BA796F15
+:106930009B83360FEFD919BF2FE4F7AAB80F6B3935
+:10694000D92BDF10308384A6FA5927A7D7CA7EF245
+:106950009C3D976F8DA255E3F6BB48BE7D30C09F2E
+:106960008FEB1FF060F4CFBE38395FC845BAD785CA
+:10697000BE03FE9B88CFB17DBBCD9F32D2F09DC8B8
+:10698000BFE5E3AF14E3C3BC53D1CFF75E9E719F65
+:106990002BCBF66EB9C0DA999ECF92C981ED1B89D7
+:1069A000BF3E39CAE5CCB2C8CC2A7ADF6E8BE6E3AB
+:1069B000FBC8BE590AC909B04312ADF3ED36B1CEDA
+:1069C0008DEF619E56458FDF67F9F93DC92FF3EFD3
+:1069D00087F6BA751DE71F7BFC79717CBDCAFC8DFB
+:1069E00005267B4E966639F1B0494EC8EFD90F7334
+:1069F000139E8F88CB8730E16F892DF26F3FC07572
+:106A0000FDAA83CE452E79C246F7FB7CF8F8FE97A7
+:106A1000BF0EFCFFE14EB99E8DF2D7BC9E1B9EBC03
+:106A20009E255ACF1FE60458C2F50CCF13AEE71CC3
+:106A30007EDEE0FF96FC5D9044FEBED0AFA7DD7128
+:106A400015543FF8C9E222DA9F99F02BF16A96A714
+:106A500037A3B190DB539EC29FA34C874F8947C990
+:106A6000A78BFE63298DD3CDCF925F253F77F3AB04
+:106A7000196E233ECDEF37E2DEA93C4E7FDB1AD8FC
+:106A80009763BCF61995F2F33AB5AEF42C18779DDE
+:106A9000C8EFE9F4887A26AF77E5DAD7A33C91CF3F
+:106AA000BB5278BE4367A02B3D53B71F786BAF9A9C
+:106AB0008EE7013A2289F332286303FD2049F2363A
+:106AC000E4B9DFCE54EEEFEB4CE57EBEC9AA6B60B5
+:106AD00008F777AD3CBE34B7F9C674DCDF77EE1D3E
+:106AE0003CA31AF70387549E7314F65B0B00BFF5A3
+:106AF0001C74768A85BF3F1EEDF7BD8BA7623F737E
+:106B00003719F132DFB5DD8EFD9C65ABA89C7FBFE8
+:106B10002DCE27F0DF22CCD7423EFFA1E9F9DE6B74
+:106B200089AF1699F82A887C95E03C4966A158AF50
+:106B3000A5AC94EFB7457C4CC8BDC9EA8819D59877
+:106B40004F79909FF738BD5765EB11DEC745BC2CD8
+:106B50009C4BFCBA0CF85BEF37FD08F96E58723DA0
+:106B6000FFD1CF8F8FB9139A2CF9C51F473E0CE583
+:106B700047BF78F592FFC2FA2F5F19F847D6B3FDE9
+:106B8000C467FF7A0BE5753EEBA07B4D3B9FFDD5BF
+:106B9000C03BB1FEB483EE17ED5CC3F7D9E167DD0E
+:106BA000A4FF3B07707BB1E59973233B487FF17BE2
+:106BB00083C717F27B2A4EEFFDDB1B0AE6F3ED05D8
+:106BC000A8503E8AFD5BE3D329B44FEF7CE69C617D
+:106BD0007FFACFC2B34C9CBBEA74B36A3C27DD9901
+:106BE000C9CFA936FED7B81FE1B9CBA5BBF7D9EB02
+:106BF000E1FDC4FFF3F94894439D4F72BB03ECE100
+:106C0000ADCCC7D8570A37DF6B03FA7D8C3622AC80
+:106C1000998EC217A7E179929E78E178E8043C202A
+:106C20005C809706949FC9F0714B213F07F3AF87B3
+:106C30008F3FDF82E32FD93B96EE198EE345F1F3C8
+:106C4000E76ECAF700F8F9F367CF8D443BEA42F0EC
+:106C5000AEFA5F06EF0FFEC5F97D5021D74766BE3D
+:106C6000EFC9D7BFBC8DEA3F75FB68BE7D5CEF4FB7
+:106C7000FF2FA3F7B1FF6FE97D48D0DBEDC1B84C22
+:106C8000E7339F0F641701F7B97F593AF70E77B7CB
+:106C9000DD63F13947C3FC5E6391EB2B95E4F9A307
+:106CA00043FA2B721F44FB0C790FF7F49CF96447ED
+:106CB0004CF7737F4C0B2B3B88E7ECC27E95E217B9
+:106CC00094BC0378689F551AA13C316B78E8F73182
+:106CD0006FEC86A53E7E5F9971FF353DAFAA0AED48
+:106CE000B923CD302F6877C46DF1B4000833FC2A86
+:106CF000D97F5092DDF78709D7521ECA8C0AE33E2E
+:106D0000E4EBA6FDC48DD5C6F737B06DB998EF7723
+:106D100043838DF293AE37B5B7F4F7105E6E644DD2
+:106D2000EBB83FE7E2F034AB3FDF8FF5C443EF78D9
+:106D3000EB8127B1DFA4DC21AD27DE1C41BEFF744F
+:106D4000C00B616F89BCBC157DC22713FB5287182D
+:106D50005AE2D7E1E7F78EEAFA25BC48BC5F2CBEC1
+:106D6000259DCC7897F8957833D361189EF7CC8D14
+:106D7000E33F5E1AEFD566C26E9CDE6D37BA088FB0
+:106D8000BFDBCECF4BFCAEA27E5329D61FE7F7C1A7
+:106D90009F1D3F8A3901DE2336B687E2427EBFE679
+:106DA0001913CF9F512A7E45F109CC5FD4EF57319B
+:106DB0007F510F17E62FEAEB98BFA86F8FF98BFA78
+:106DC000F798BFA87F8FF98BFA3AE62FEADB63FECC
+:106DD000A2BE8EF98BFAF698BFA8AF63FEA2BE3DA5
+:106DE000E62FEADF63FEA2FE3DE62FEAEB98BFA89E
+:106DF0006F8FF98BFAF798BFA87F8FF98BFA3AE675
+:106E00002FEADB63DEA2FE3DE62DEADF639EA2BE33
+:106E10008EF989FAF65F8E3D67A857B2DF18DA4F10
+:106E200074BE64A84FF6FCD1D0FE2BDE1386F7D7D4
+:106E3000681F1ADE4BFA5F5B72C6F01C631FE131FC
+:106E4000B88FE17FA6F9FE66E8C7CA021427B5B37A
+:106E5000262A9DE8EF853295EDA4D205CB1CCBF711
+:106E600087057FDA1FF9756B783D32D79171E70698
+:106E7000A2FCFFDDF8EBB85F42C41766E03F356067
+:106E8000E2B4CFFAE33E57C64FD3632A8B8E023E5D
+:106E90008C29547A62692C9A0D7C184BA1322B965E
+:106EA0004DCFB3639954E6C40AE9796EAC80CABC8D
+:106EB000D8602AF363C5547A63975159101B4E6505
+:106EC000BFD828FAAE30564A65FFD855F47C406CDE
+:106ED0001C95036313E97951AC924A2D762D95C523
+:106EE000B16BA81C14BB8EDA0D8ECDA472486C3623
+:106EF0003D1F1ABB89CA4B62F5540E8BD5525912ED
+:106F00005B4CE5F0D8422A2F8DDD4ADF5D165B4EE3
+:106F1000E588D89DF4FCF2D81D548E8CB550794587
+:106F2000AC994A5FEC1E6A571ADB486559EC3E7A09
+:106F30003E2AB699CAD1B187E97979EC212AC7C42A
+:106F40007E44E5D8581B9515B1FFA0725CECC75480
+:106F50005E197B8ABEBB2AB68BCAF1B1FFA2E75786
+:106F6000C7FE93CA2FC5F6D3F32FC7F651E98FFD9D
+:106F7000869E57C60E513921F6123D9F187B91CA45
+:106F800049B13FD2F3C9B157A99C123B41E55762C1
+:106F90006F515915FB90CA6B62EF53F9D5D819FAA6
+:106FA000EEDAD89FA99C1AFB1B3D9F16FB2B95DDA3
+:106FB000FBFFF1497F57C0721EF7CFAEAC3EDD57E5
+:106FC000B6392D9DE4E2F4555C2E3E98F6F101921F
+:106FD00093E31C9A8384DF1643BC8B7E4402F67DC8
+:106FE000FBC6BDD71FED9DF595275EBF15F5D97280
+:106FF0000713FACC24773F73097F27C37CC49B0512
+:107000005FFFAE627F2EDA51EBCB3A96A0DFE4DE73
+:10701000E28E1A2C0B07703D9925CA8201C2CF5A05
+:10702000C2F56FCDF2A1FCF70572FA065FB5D0DBB1
+:10703000B2BD5224EAAEAE81745EAF8FFDF4B5DD11
+:1070400085F2B03EEF1FBC62406E6FE707FBDC4F7E
+:10705000C517D44FE580047961E67EDE14746F1B9A
+:1070600010988CED99D53F12DF4F5853A0E2EFAA4C
+:10707000D46E523CC82FF56B4BA7205DCB989FFC7C
+:10708000923727C9275B2CE85AD76463E89FACD3B3
+:1070900018F987EB76F33C64F4A74E037E6910FC85
+:1070A000B274E39FC9EFD4D0B480E73D45B87F4ABE
+:1070B000FE8ECDE2D6B617D0AD77961DA6FCF8C5EC
+:1070C0003B8CFEAB46E19F5ABAD3F4BCE92B09FDD9
+:1070D0009E66BFD4DC01C2DFE9E3794F4CED4F700F
+:1070E0009F05B8319F24789BDB897A03F0417118A2
+:1070F0008907E9F794F8603DCF5D50FEEAE98343E4
+:10710000294FEEB4A6E563BB603AFF3D2BC51A1CC0
+:107110008BCF018F94CFD2D59C46F9506F811ED072
+:1071200030F1CA131C8BF7C775BC368089FB2B8DD9
+:10713000F108E726CA13AF8539605E4AED63D9745A
+:107140006E13FA1BB907FD9A8FD9281F29CC5678E0
+:107150005945CF7845609D8DF8A26E4F26CF4F0BD5
+:10716000FB8FE2B9024997B7D60E9E82794D751B07
+:107170008A4BC95DB7C746F6A18CCB4A7AF5CCDFFE
+:10718000E6F9028D2CB21E5397805E2713D2AB75A1
+:107190001FD115E8763209DD4EF646B7874D7443A8
+:1071A0003FF58DF8725536ADE79A35D1A14D3AFECF
+:1071B00034FBFFD9DC2BE9DE1399FF5CD54FFECE03
+:1071C000982F0FE97B665339D1CD4CAFAABFD713A7
+:1071D0005DD86B6EBA77F8E6C16CCED7E0F91CE1EA
+:1071E000F7BCB9E51AB2BF770B39F7BBD598FBC925
+:1071F000D88BAB9DCC0FC6F74BAB3D54FFC36A2F6A
+:10720000D55F59AD51F9EAEA122A4FDA795E915CFD
+:107210005FC00894DFF7B458574F0F90FBB2955EEC
+:10722000F47357FDFDA5720B89BE37A64F1E40763D
+:10723000BB215FA47A96311FA4C326F2CD362A3E25
+:10724000BC4FA62E7095A13D2B1915AFA3FE11F9C9
+:107250002B751B32E91EBB9BA6661BDADFB0A1D0E3
+:1072600050FFFD008DE09E5935D8F0FCEB359719A5
+:10727000EAB5E2F723985641EB46C6BF407373BAAE
+:107280007878DB4F9AC6E6DF0EE37F72D846EFCD03
+:10729000F438690FD37E3EBCCDE1C3F8DE293CFF54
+:1072A00006F5537F5029BFE8948D853D20E24F2994
+:1072B0006C2D96CCCAD7D5D9637C5D55FD5D65B87C
+:1072C0008F673F71507CB07E8BC2C27837431760A6
+:1072D0001EC65DF96307C13D778BCA8274BE4ADB67
+:1072E0008971F2958F0DF3617CF4E6C1D10178DEEE
+:1072F000B0EBE7293E3CF755DFC1BF3F05FBF34C40
+:10730000CC8F52CA281EF1A769ADF32D986FA71E26
+:10731000CEC5F5FAA727F9EF9A2D5CFE87311EC07E
+:10732000F3A21776BE5C01E39C6C5569DC0F7738DD
+:10733000DA545AF7FE7CBCDF360E7784FC14D7F69D
+:107340000BFC0DE5F507F3232349FEACE2FEF19EAD
+:10735000F8017891DEC8AF3A7916D76F3CFE064245
+:10736000A800E544BDCD4771D9939B6C142F047DD3
+:1073700040F906275BB32D5C0E3D497C5767D5EC81
+:10738000FA71EB36A97EFEFB189A1DE7CB36AB41AE
+:107390003616EB3C3F22BC4109F2F88F91BEB72E66
+:1073A0001F4BE7A2CD795CB2FC18D6545017575A40
+:1073B000F40C8FFFB2D11D567D9EBBF4CFB060851B
+:1073C000E13EA325831EFCCE78284FFBF9D58B67C1
+:1073D000B7BB494E7E64796ECCED507E382DFCAE45
+:1073E00015E8F2A21A1C3610F3862C9BB62A145705
+:1073F00039F11D8CFB7FF084CD47CB50E48D2DFA05
+:10740000C9428A4F25B7179897C7AFA3798A176FD4
+:107410002766942F329BED14FE8508CF33C04900B8
+:107420007E3C4B785CEC44B9FB6E3C3F5C6F3A6F42
+:107430007C429CB3B872A062D0D7770CE472A0DE15
+:10744000C2D7277B96DF43297F2F4ECA71296FA5AC
+:10745000BCFEEA409EC722E52C633B49BECC17F731
+:10746000252FD9E1E0E78B34E6413C2EE4646277D6
+:107470000DE4EB7A91FD89EF235B2F60EDA4F73EDD
+:10748000B045E6B717E3F76D6BB3E87B9B2F82EB54
+:1074900038227F8FCE4A726401E3F35CDAAA44A2F9
+:1074A0003A7F87FC7D12867A4227777AE805933EF9
+:1074B0009827F4DF3C66CA376A35EAA9409A9BE010
+:1074C0005AD42AF2B0BBE7A5B2F318EF0A465E9889
+:1074D0004EF3567C9104F358C0BAA2782FF2D2C76B
+:1074E000F93926F3BCCC70F4759EF37D3327E1FDAA
+:1074F000CADDE39AE62DF1CDF060958E0E12EFF322
+:10750000C31C9FF3F72A44AF7784BD25CF079AE9C0
+:10751000BF8005A6A39C5B703FEC338BE3FC20F996
+:1075200060E1AE089D07FC90B5A6BB603D2CD9B2CA
+:10753000EB8671F0FD821FBE68477EAFC98A0EB52B
+:1075400064C2FE333CE9BB555727D0FB263DFF45BF
+:10755000E18909BF157D077899B75DA53C0A5D3BB8
+:10756000914710267C3584F9EF09361C557D2DF0A6
+:10757000B4017FE6A8ECE2E72BF1F63F3D6FB35D87
+:10758000F38B81BDDB356679D3C3AE31E9533CCF94
+:1075900081FAB32B97E7A77F62F56764919C36C9A0
+:1075A000E1DC32BA8F55CAE1F9420FCA71E6A1FE99
+:1075B00083FABB5B9E4A477FC63BF73F9547F91A64
+:1075C000A86F46C4F5CD6DF57CBCDB7E9942F952BF
+:1075D0007F9AD63E12EDC19A477E95AEBFEFF54F2A
+:1075E00005C1A30371BE423F2E55DB06E2EF1A4AE6
+:1075F000397BC17D5B3238DD1780D36D84B30EE1FA
+:10760000D49D53A91770BEBD81C377621387776E6F
+:107610000F38C31457B9ED470E5F98EC8E28E9F583
+:1076200053BB5486FBAC6EBBC364079C65AD5B115A
+:107630001F4B57BCF28615F862E125801FE0839A44
+:10764000CD0ED2FB0B7FCEE3A91F2895F914D03FB6
+:10765000104DBF039E2F027B01ED8DF83CBAED80EB
+:10766000CF108FDD76401FF1B74CF8B596EDFD15C4
+:10767000FD8E96E2E7F998CBE4BD367B4CF7DA68ED
+:107680002803F8397F27D2A9BFF93E2EEE9FFDCB04
+:10769000D03FDFB282F8BFEB12FD39B6C6D4A80DD9
+:1076A000F390BB762964272D5D59995EC9F07C1B48
+:1076B000F7AB151471FDA6F8FD945FE300BAA6C2FE
+:1076C00078FD8B34FE5CF3F07CF31F32BA4747CE73
+:1076D000D7FC1CFDED4ED4872E0BE94333FCD716A7
+:1076E00071BDB954B5907DBDC4CEEDEC4E717FC572
+:1076F00070318FE145FC9CC315C2AFD0897625C699
+:10770000BBAF76D0EF18313689FCEE56C6F9CF2ADA
+:10771000F1E6B17EDCBDBEC97EEEEA8F78BA85B5F2
+:10772000D3EF224EAF98A9E1798637F29C744F14BB
+:10773000FC09603FB3453F476CFCFCC21B3806C0E8
+:10774000355BF8A7DFC0EB5161FC370AEC64D786E4
+:107750009F7190DD70572AF71FB29C0C2BAE87AF3C
+:107760000B3975F378871FE5FAECF17705B084FEE5
+:10777000C20CF055E3EC5A570AE3345BB8BE6FCE47
+:1077800062DC2FB0B6A31CF1770598C998BF0FD063
+:10779000EF3E9FDD1B1F19CF4F2C413FC3958C330C
+:1077A0005805E1D7505F62E7EF6B1FDD31E3FEF173
+:1077B000B04FC0AC29D4338823E48BDA0CDAFFCE87
+:1077C000C0F30559585A89DFBE6665610B2F37B87B
+:1077D000E85E25AFE17761AFAF60D10C802F7AC84A
+:1077E00078BEE3C6A8253A0CE345D6E83EC49FC55B
+:1077F000A9D93C304EA04A2943BC2F59D3B7F9AE82
+:107800007CF4A919F7F7873ADEE785F3BC43A17C3E
+:10781000A1D9B0E8914F6FB1B2036A19A71FF26105
+:10782000639616A676CB399FCB7325922EA5D0BD35
+:107830001EBFB3C5FCA09F0DE9F8BD3DB15F252C6F
+:10784000F852DA6B8BC5BA5D2CF9EE71E37ADD265E
+:10785000D70DDA8780B7D9A24CC6F78F8A75F16841
+:1078600011DF67DE5324F7997D1B6FA9834509EE6D
+:10787000671C444739EE0C513E523488FA93F3901A
+:10788000FC3B9F35513ECF7CE1A7B18024A1FCE0B9
+:10789000D61F71BF9029EF080C25CA6F5BB4DDFCC1
+:1078A0005CE7E7510D7289FCA68ABD6B2ECE4FF9BD
+:1078B000528A0FF97DB67D27F907CCED6CF8FBA94C
+:1078C0001877DB00769522E26550776C52E8772FC7
+:1078D00066F7EFBA1CF53948EB29742E54D8DBF360
+:1078E000057D1DE27EABF9685F615C0DED2BC4D7B1
+:1078F000166E575A853D5CB7C9686FCC5EABB33B1B
+:107900007961B81FC061CA53B709BBE34D7BD7E5A6
+:1079100028F7CDF705BC69E17084F318BF573387AA
+:10792000BFB70AFB52F2D5CF8A6C86789B3C775A58
+:1079300083F28ADFDB60CAD372D1FD31350ABFBF63
+:1079400053FA215F17E569B043E9BE9CE369140768
+:1079500037FB273B2BDD618BCE4F7973C66DD3117F
+:107960003F35E9762B96AF77DF2BD641E31FF70C37
+:1079700022FB677DE5A82D989FF4DEA36766380794
+:107980005034459C9F8AFD0EF3E9677D06F050FD5B
+:10799000AF33FCB08FEA7CBEEB162788EECF8B3E70
+:1079A0009D61053DDFF940D756AC67686A80EAF70C
+:1079B000760DC43B9733220E5E6F96FD3902D85F79
+:1079C000E743BCFED1A38E4018ED5F716EA9E64A75
+:1079D00085E4AF0BD75779DCCF5463798E9713F8D2
+:1079E000EFA25CA89D570BB88ACAF13ED493F4FB72
+:1079F0000B8307F95D45807FCFC0E0392C17CD544C
+:107A0000C2763CEF7F347289D06B097F27C425D6BC
+:107A10006B617180BE977E74E88769E53DFBF96F05
+:107A20008E8B3EA000800000000000001F8B08002D
+:107A300000000000000BE57D0978545596F07DF5B7
+:107A40006A4B52498A244042162A090901031490BC
+:107A50004080A04512202C810A28A2A0168B10106D
+:107A60004840EDA65B7AAAC226E216D4B1691B9DF6
+:107A700012D1C66EB5A3B204D92A6C823A5228DA62
+:107A8000A8A041504163774418E30CB6FF39E7DE04
+:107A900097AAFBA8B0F4F4CC37DFF7878FEFE6BCEA
+:107AA0007BDF5DCE7ECEBDF7651C63AE7A1B633F88
+:107AB000E3CF0DA1D2D6D5C05821632F3ADCB6AEA4
+:107AC000504E5D9813EFC967CC9EE18972003CB7B8
+:107AD00052F199FB30C68EFA73DDB18C8DBB423FFB
+:107AE000BFC8BCA49F847FA49F8F74FDDCAEC0BBC5
+:107AF00083E03F733AF0FD3BB25DBD1D1D19BBEB4A
+:107B00005F9807FB6165430C6C0063775B19FD7C34
+:107B10005FB335D75A00E54B96449609ED5ED9968A
+:107B2000310BFA618BE1A514C6BE69FCC8EC807EFE
+:107B300016B4AACC95C85875AB42E5824D8DE611B6
+:107B4000D0AE1ACAD2B0F9CD13F365ACC93821361C
+:107B5000F4BCBF83CF97B1358CE17C5E396BF440C8
+:107B6000BBBB0CF55F3E95048F072BCEE71D97AE90
+:107B70003355BCF72963E5F5F997D60F722854FF02
+:107B8000588EAB08D7D905FA405835F0F5EADB2F07
+:107B900015FD4D8D6677B8A17EC68058AB03F05DAC
+:107BA00078D4B32C16E6316B5D663F15FAE89F5129
+:107BB0005282FDB19983257C9577612C88EB33B691
+:107BC0007462507EBFA3309EC1BCA62604EF617DC7
+:107BD00019FB8DBF7B9D752863637E0B6DBAD02B1F
+:107BE0002E06EF965B04ECBBDE5D560CF0DF558293
+:107BF0003D8EA23A1FBC7F10E703E56D037B45B3C2
+:107C0000DE80BDCC18833D9EB192F469BF41BEB801
+:107C10006DE0D011F87C982536771AE197117F94A2
+:107C2000A4BB27633DB667B00E8F39D0F166588785
+:107C3000E72DD5E98375787AC778FC11F03649E0ED
+:107C4000E1370E3B95070D30CF7EA17968E30367DE
+:107C5000DE1384FE4E2F4DE9BB1AFA7B367DD81217
+:107C6000C28B18FFD974CF9CF0F161B9BDF1F9D581
+:107C7000CE639698C71241377731F099C0F5CFF0AF
+:107C80007F42598C04DF383691B9F242F0A41B537D
+:107C90002578F2D46CA9FDAD33AF93EA2B2CC182C9
+:107CA0001A5B88BFF5F3D14A2014F16975ECC63828
+:107CB00006533CB1E3C28753404EFEB641752A30AD
+:107CC000D7393B9FFF7008B43A070B4E04BC9D7335
+:107CD0000100EB3DB749F5FB32913F5CC68A4E8C03
+:107CE000556157D07EFEA1D7CDC3E0D7AA9AD963FC
+:107CF000918E73FCA6CF9BC2E679815D34B32C9044
+:107D0000878DF2F36AF6D0776A6F840266772FE880
+:107D1000A75E575F33F22B1687ED8C9F3769EB8494
+:107D2000F1171FCF7C645FD8BA9F76C4267D791D7A
+:107D3000FCD28FF5FB59C5F19A0FC00A596943234C
+:107D4000D169D921D5892CBA2C5D610AAC73E4269E
+:107D50008B3F0A44EBDB6D27CD0EC0D70F5EC723E8
+:107D6000FB4C28FFB58C25E27B27CD4DF07CA8C3CA
+:107D700041785AB0E33B3303BA8FDCB190E47A0424
+:107D8000E8B178E09F6023EBB509FAF765C63A9F42
+:107D900087FEEF5A350A848BB1F8D62954CEAB1B37
+:107DA00045FDCD6F9D48F082D618820F46074730BB
+:107DB00098C7C12D1DD83298C7613590FB7BECC7A1
+:107DC000124B7AA222F5B6A5B8EE83D1BEFCBB61F8
+:107DD000BC8A3F8F2C47BC2ED8A4B890CF2A5476AB
+:107DE0005049C0F946517F15EA7B050BE1F998D25D
+:107DF000589F219EEA19837A7540EC6A06B06A069C
+:107E00007D11813F0F09FD626AE2F31EDE5A49FDD2
+:107E100069F5871D59B47E0D3675DC609C6E0BAD1F
+:107E2000C7D4A45039BAF53A2AAB37551A1D30CE0B
+:107E30005B79CF25219EA0BDCD13512F0F8C6711EB
+:107E4000F497565A843E9E82FA18FA3D90E5FA025B
+:107E5000E572DC9226A315F5A9CD6A7F1EF8605C59
+:107E6000515FC7ACB075A97B6E610EE0234B528B9E
+:107E7000C905FD4F81325C7FDFD18EBDF9A64D7FF4
+:107E8000D752A9D925E65CC218F0F9ED763E6F4DC0
+:107E9000AE8E89F6DAFB4185CB876FB3C5FF3CFC1C
+:107EA000FE5996E7279C6F70189BFC1AE9D3604631
+:107EB00065EC3F6FFE405F2BD23FCED8C412E07D11
+:107EC00043A6367F2ED7579A7F8B98FF61952D4614
+:107ED000BE387CC30D4117CCABF1BEFEFDD13E6870
+:107EE000E325669AA93F666FB988FC5ABD2BC6B1D7
+:107EF0001AD65701B441B865A7C5BF3E939E332536
+:107F0000094BCB7A05EAABE35A72D1FE94EE8E0AA6
+:107F100020DF36EE8E32A21D7933C79398D9119F98
+:107F2000772F5380BF5D3B2C46E48364872B29B3B6
+:107F3000B0FDF95E498F69F2A8E733CF2A2E7F1E84
+:107F40002187D304DF4E177238CDE88CFF25CCFB98
+:107F50008E7754867A7CFA12A5D7A602D469B1CE60
+:107F60009C3039D4E4CD847CD91FF993F3E5BCD699
+:107F70000E42BE3345BF5C0E2AC040237E2AAEEBC4
+:107F8000E047F95ED09A48ED3479D5E4343DDB53CF
+:107F90008AEBAE5806F20DE37896A614A0BC84F8DE
+:107FA000C46C477E023E499E15C607CB1A7F342219
+:107FB0009F988A15E2130B94A5617CE46EF353EC51
+:107FC000233AC13CC62DCF34AC66A1FA72E4978E39
+:107FD00057CFEF85A2FD745B20C700FD996AA29C74
+:107FE0004B615EE7921CA4C7163D0000A06091C9DA
+:107FF0005D8A7EC6A2DF294ED4BFE87FA0FE19703D
+:10800000ACC6EC099BDF2DADBD9903F034B1B51BB7
+:1080100095FD333C93100FD35A27093CF6A69239AD
+:108020008A0C389F7BACDCCE9CAFB9FF761CEFBCD2
+:10803000DFE2C4F1182BE2F416F32D74393BFF1282
+:10804000E7F78E893D0BEDCF44795494CB33E9CCDF
+:10805000FE384C71C65AA033F47BC6C47C76A0E7C8
+:108060004C803D087760AE0EFD50EE609D6176E578
+:1080700082B12E8365037D17FDE55323A8C239B96C
+:10808000C1DE011877EA306EFF9B3798C8FECF6BD0
+:108090007C6F8001EABFCE747566A07BC774F1D493
+:1080A000E07AE64EF0BF6202F8AE875F8F1BE4080D
+:1080B000E1B3DE18C831C2FBF580471FCCABFE210F
+:1080C000B5DCCFFD9E98CA5E57E6EBB9ADD9841FEB
+:1080D000CDDE68FA7BAB37191611D2E357B2431ADB
+:1080E0007FCF1772301FE58085DB9B4AF730E4C3F2
+:1080F0003CC599C3C2ED0D97074D4F03BF93DC54A8
+:1081000064A73B97B190DED6DBA3BD6AFDE3836134
+:10811000BDCBB33CEB510F94FCE9BF5EFF18AAE660
+:10812000BDF66219D269D8750A5395ABD1933F9ABF
+:10813000484F2EA964A427A10CD793A676FCF43F40
+:10814000645E9B9EFF57C1F7E0DF92DF887A3CBCFC
+:10815000BFCFB24AB6219D77652A5CEFFE93E6ADAC
+:10816000D7EFBBDAE4F5EAF4FB4BA2FD95F4FB1183
+:10817000D4EF8597EA7306FDA13EFFDBCE1E7ED4C9
+:10818000F79F32D0FF68DF76C4389E17FA9EEC4125
+:1081900074BCFF72FAFEB19C1947103F11F4FD7BCD
+:1081A000FF0C7DAFF1975E1EF472A0E7FB310F82EA
+:1081B000FF8574DAAA30D4AF217F8B111F1FCCE268
+:1081C0007CACC94D98FF45761EE4C19F9379A95CAC
+:1081D0007E5FF3970207C69B05B17D9912E2774D4A
+:1081E0005E347ED7DB9139591E35AB302427F35EE0
+:1081F000D3DB81F6F8699B09E357D3BCEFB81D8048
+:1082000032DC0EB4E7EF58B3AE4D0EFEE32AF92987
+:1082100035EB7F9C9F52B322F3535A56C77F9C9FE6
+:108220002E4347B2331A9F8D799BF307CBE6FE3E70
+:10823000F00BCDFBA039DDBF2C13F51ED787637E75
+:10824000663588CF3B443E41E3D711D91E17CE5344
+:10825000A333FAF7E8B75FAD5F3825A986B9E0F92F
+:108260001D5086EB0D0BD22F827F3FFC1AE9DC3FBD
+:10827000EBEAE83C49D0F99FE8174ECB8AE0173289
+:1082800017B7FF21BA582622DF7C1F303294AFF691
+:10829000E86A5ACBF1AEC12B0246CDBE26A27D05BF
+:1082A0007E99FEDFE1978AD2FAF35670FD7CEB8B64
+:1082B0002B8D83001F454CE43F86AE717543FD0254
+:1082C000BF0FA61E293F725815B0EFFA2365308FF5
+:1082D000318FB7D5FBB07E78717C5B3E054309AD2D
+:1082E000BD77FD90230FD1BCEB38BE3D4D4677AF37
+:1082F00030B800E0D830B84807AFE3EDD18ED8A948
+:108300001F3F974FE85FE987B0D69F9003D632A210
+:1083100003FA8B9B143BE6436E2DFE9B19E95351E8
+:10832000DA742015D6FBF8FAE195B61EF01CF5209C
+:10833000CCF7B9F5156B7C46F17E27CA8FD18FA596
+:108340005E71A940A779458A3F2BF3523C3E9725A1
+:10835000DB33FC31CAEF3373C1B5BD8FF24BEF672E
+:10836000D1FB01CB358C7F733173F923E8C957B545
+:10837000761701D6FA07DC4DACE771B8BEFD3621A1
+:108380006F4183613E037C35AE9FB606F365C3192A
+:10839000E78FBDEB3D95980F2342EBD67BB9F9FEF5
+:1083A000214B8EEFF0C721BF1FB81CBE5EBEE47D1F
+:1083B000C11F5532BFC41BDDFBBE8779C427297698
+:1083C000F46B17B8A31E42FFBDA254E3EFBB2A5DB6
+:1083D000C5B0BE2826E5FF42FC3DAF12F97B01D3B4
+:1083E000DA2F588376C96D686BCFF97D87D2F67E18
+:1083F0001EF00FA5E2E0FD13EBE7AFF1D9881E54A4
+:108400004F70B7CBF07BBD0E2ED6C987E06F924F71
+:10841000D4DB809F9C087AE33F059DBF55D864D488
+:108420007BC112EEEF05B378D9259BFB77866CDE16
+:108430002E3A5BD0393A0C0F69213AC34F00E388DA
+:10844000B075139E6E49D2D6FD70E55858573081ED
+:10845000F552804F92B21F58B33C8C4F3A653F5C47
+:10846000897808F5F7E011D4FBB7083C75C97EE8B8
+:10847000888FEB3305E56E3E3104F0C126C5A7C2F7
+:108480003AE7231F4458E7E94BE5C6A77BDF65BA07
+:10849000CCFB5F5FCA872EDDFBCC94742DEF0B3ACB
+:1084A0008DD5D1B15C47C7321D3C5583FD923ED37B
+:1084B000F4DCF486352B3A2561BE51413381FADA7A
+:1084C000ACF465ACCF734F56DA0621BF3A4CA9A085
+:1084D000F3FB3FB7F6881578B912F519F1EFEFD62F
+:1084E000B8801F27A2BC13FC54A5AB0FF24FCD8A56
+:1084F00064683FE8B9DFAFB142D35B97AF31A14FBA
+:1085000033F4B9A7D718817EB714FCF900F667AC2D
+:10851000FDB72363332FC3AF75BA75ACD3C13E5DCE
+:10852000FB27AEA0DF97EBDE5FA2AB7F4807AFD59E
+:10853000C1ABE4F7A7CD54484EA601FD1071579288
+:108540009B89D96D79A4367BA6D8C84F92F87ECC8A
+:10855000320EDFF6DCCB95ABF2C3E0EC3F5786F38F
+:10856000B189F19F2949CC87F6C3D48E3E1B93DD98
+:108570000E1FE5E9ED1DAFFF0C7F4DA17D16C92E45
+:10858000EF5565B851D5E6BDF3C83D367CA8C13B73
+:108590002AD11F6F77DF83BD5189FB1E631E15B083
+:1085A0006F5B25EA3D6D9D5AFB113FFDACE278778C
+:1085B000676FABDC80FB2A25811CCCD74F4DE025B3
+:1085C000D81915ED58B5C8778CD8A9BAD1CE4C8D2D
+:1085D0000EE42CCA0F5B27ABCFC57536DEA7127D24
+:1085E0007CCB783C329D39CD98AF688C8F5FFC0294
+:1085F000B4DF7B9FBA18EDDAA78B133BE1FCF7657C
+:1086000073BF6D6F7CD74E7702DC18738719F3B593
+:108610008DF70FA7728FEA5AD9027CBCE6B9836442
+:10862000E71B63E2093F0F67EFABAC05B9A8CB7658
+:10863000D0FB9E047BA706F457579B18E6ABC1916D
+:108640007A86F8E6614BDFD5308F69B5D7D1FED198
+:10865000F47FAD1C9102EDA6AF30D1BE02FCF4C692
+:10866000797B560F3763FDCCE5A2F48DA472F7DF5A
+:108670005F7FBB37B46F794075AE87C6BB5AB3E234
+:10868000A6C3BC4E45713DFC7973B7389C678F6EAD
+:108690009E75D9C8AF71B1D10A1A0FBB236E02F40F
+:1086A0009B9BE37A3ABB63A8FDEEBFABB40FB6BDAC
+:1086B000797A27CC3FFD41E8EF5DADD33B4D0FB359
+:1086C000F7B3BE35129E779B1DF7A07FB93B3A5D8D
+:1086D000C1BC0CE03911F3B633857F0DFCB2F8F55F
+:1086E0000876FF896C95F072DAB2989D02266E7C4E
+:1086F000B06331CE537B4FDB7F33A539FA85FBD195
+:108700001BBA96BC8EEB08F1D96747906FC88F06ED
+:1087100078D7739FACF1A12DDC0BFE3FCE23C9357A
+:1087200002EBD99244BE0F9A5C9F1B9E8F08F9A959
+:108730004B853EE0ED4EF862296E3DF152941FE309
+:108740009913BE4F62C3F3EF9A9CCC8E8BF5A13187
+:10875000FE2A36D68878FDD4E8FDF257B86FF8B413
+:1087600089F4E8ACA73B2E69417D00F4C47C907E7F
+:10877000DCE46E261AB7FDFDC1E6CAB2B430396139
+:10878000CD95AEFCF6E5E4D873DF546EB0B52F2777
+:10879000B385DF3EE269931BF97C7661AC11F7E9A2
+:1087A0004A9EDEFF3CF2E3EC8551FD2C30F1D94FBF
+:1087B0005B88BE4DB1B13E3BEE23C6C51A3B40F9C6
+:1087C000ADD0234DB55114A7A89DCCA4F7D4958561
+:1087D0000EC44FA9CA8C56B02B6A9CD3E1E6F07246
+:1087E000CC1BAE882D72207D3B76E3F2D0561F3F26
+:1087F00079B4D23BB46F7676F1E34F0E84F97DCD38
+:10880000FC930666FEF7F7D1AA993B1EF38FFF5340
+:10881000FB68E66EFA7DB4FCF89B91FD16AB346FF5
+:108820007569941FF1A966703B319229B48FC6EC2B
+:10883000B0FE5EA17D34F5D7FD093FA7BDC057DD71
+:10884000012F71566AAFFE5AF55B60DCD2449E6F11
+:10885000559FAC64B8AF0678F5D9011E995443FB17
+:108860006B4B859E99A630773DC9BF3303E3E4592E
+:108870004F47111D673F33E7C3DF1520DD2A92C242
+:10888000E52953F01FF4C7AC09A17EBEAAFD4D0631
+:10889000CEA7F4DF20BEC4B853F53C790BE9CD1860
+:1088A000DA6F63F6A6870722BFD4C6F4C53CF9EC9D
+:1088B000A75332B2F243EFCF5E7A5F2E7F1FE2D62C
+:1088C00038D45B51B49E799B2CC42FD31E505D6469
+:1088D00027D3CD64273F5F1E45F0BCB42292B76911
+:1088E00006BEFF063E6132E9778E7236CFC65CAFB8
+:1088F000DB50DF3F1454397D7C826E66A44F71B724
+:108900004492CB3B10C760BFA622BF75A4FE781E61
+:108910006A9742FB4D8CD538500F4C3528A4EFF4A4
+:108920007259D18DFBAFD3329CB7E37BF31FB138C3
+:108930009766F239A8DA7C206E9A6F08CEC27D481D
+:10894000B6C542F98D6A5847541C3FF7F01ACCBFA0
+:10895000DAC88C66CC4F39B85ED3E653EDA81C89D3
+:10896000FC0AF5C78C503F3F96EBE5F91D78DE8792
+:10897000C55AFDCF878F8773CEE6EF39E250DE060A
+:1089800011BFA0FC1BA0FE6F8CD797C615399AF2B9
+:1089900069FF7E15E64B703E3D7A878D0B704A6FFE
+:1089A000E4C785C6AC58A443E2A4C938DECB2AE9A3
+:1089B0002710AA478AD00F7C59ED8FF1ECB407F647
+:1089C0008E588BF0AB7DED388569AFBC4F76EA2EC3
+:1089D000C1674DE8FFA3DD02F85528EFEDC6F5832A
+:1089E00047E5F99C7BBB29D2BE9F563FFF0113D1BF
+:1089F00063FE0ACE0FF36BFF42FDCE8F0D76427AF7
+:108A0000CCDF6C1A807CFD2F62DED36BD38B8F01A1
+:108A10007F4C37C5DB157834CF576146785E9D4271
+:108A2000B036DEFC073EE864C8E7FD6169117C14DE
+:108A3000EAB76306DAB56F5E4ACC981646F76F96CA
+:108A40006F8DC37DED5351811C3BE663164639D7CC
+:108A5000939C727A7CB33C673DE66B66DA83B1B86F
+:108A60001F3EF39EEC04B4779FDA0366ACFFB43E7E
+:108A7000D380B0CB6E2F46D865EC43F037E29C0A2A
+:108A8000FD009D16289C6FE6BDB4D79C05E33D27ED
+:108A9000F8ECDB97DFCFC5BCC1FC8C602EDA61E05F
+:108AA000ABDC54A4CB1F15F21716BCA4BAA27A876C
+:108AB000F86A01F215C8FF5CC1570B366DFD25CA77
+:108AC000E902E4A77E97F225C497FBE8F96BCF8E05
+:108AD00060FCFD7DC8779ADD0778B909F36B660104
+:108AE000C338086F10FA1AEACB78BD2F9FEC096BD8
+:108AF00032A35F5CAD727F01E42919FD89EA069318
+:108B0000AF294C3F2EC0FAFC507D7B7CB3BF9BD875
+:108B10002FABB5905DDA2FF0D2F4C0E638E48B6F5E
+:108B20005FDE7B6030C659AF2976D4FB97C8A1C001
+:108B30005B35E2298ED649FE5135E2252E84A736D3
+:108B400079137C51CD381E34BC541B059EB47AF188
+:108B5000FE01C187F398C0EBA6EE5CDE857C03C7FF
+:108B6000901DD1D6E74990CF0FFC20F8FEA858E71A
+:108B70003CE01B673EF197CB3C40C4FF50F5EDABAA
+:108B8000CF52FE48A3A736EFF81C87A6A75D1D129B
+:108B900042746E32B0AA48F9EAAF85DC996C5CAFDA
+:108BA0009CAC4DBD7D31E06FEE4BAA939087B157E1
+:108BB000D8B81643532CF9A7BF56EDB8AED23F55DF
+:108BC0008EC6756B7C67DAA8181B709F907520FCA9
+:108BD0006BF32BEDEC1EDD81F35D00E7A3CDF3A479
+:108BE00012207AF95E55ECDCDF6D32631E5193532F
+:108BF000FD7C7F10F355E394C14A1F9C8FD381F213
+:108C0000CDC00ED27C6CC7EEA3F17C27EECBEC1D61
+:108C10001AE7535FAC11DB7DCAB81ED0F8F2A4C8C6
+:108C20004B9C5CB195FC616D9CD81CCE5761E37880
+:108C300016275D3A8ED6DE94C3E7A5C9C5C104CE1A
+:108C4000FFA5CBFF42ED343D8B3F988FD3F0A9E1D8
+:108C50002D4C2E25FC68F2A5C99346D77F54AED87B
+:108C6000928EE4B7DE2FD64D32D2296417903FD1D1
+:108C7000DE59CCFC1C5C98DD24BF6664DA77664F55
+:108C800084E71A9EF4CF4371953D03F13FD2964C91
+:108C9000FBE56C79F2BE6E61FED929CC7BA13E7DED
+:108CA00051F5933E65209561F65CF3DB6A178EB44F
+:108CB0000F43FE7A49A173479AFD869F87DAF8141D
+:108CC000FAAB2A58988BFEC4EA9C2C1ABF3AC97595
+:108CD00016DF9F77263822CE118A5F869E0FA8F175
+:108CE000981FDC9429C50FF39AF7919CCF67C19523
+:108CF00018EF4E7BE0FD8A8148FF174D747E616658
+:108D00005D26D9BFB31B66F4C7D076DA8A1C82E72A
+:108D10003C7F27871FE07EDDB415852F607EFE54E3
+:108D2000946B04F279CB1AC58EF1D790E70B97DCE0
+:108D30000AF54362BB76C0F99ED870AA6230C611AC
+:108D40008B55921BD786C72761BDAB4175E2126771
+:108D500032FB925B91CF8DF12477DAB9C66526CECE
+:108D60006F77E670BD715B0ED71BB709FE2D5DB640
+:108D70002C17CF15B43C0B760AF7D7CD8EFA00C668
+:108D8000813B3B3BD7C338D510B626033F9D51B836
+:108D90003F5E656656E4AF43A6E0BD38FF43F7C6C5
+:108DA000F6ADC509A81707A07CB844DC0571148D81
+:108DB000ABE14B1B7FA61857EB477BEF20FA5568BA
+:108DC00047C47CCF2E7F7112FA0B6737E624B03090
+:108DD000BC9FC57501BEE7807E7C2D423CB8304704
+:108DE000CB4FF8A9AC1279C443A6BA34DCCF05BF87
+:108DF000FE74B87FFED5B35156E44BF0EBE5E726A1
+:108E00006E57C09F979E83FC48705BBCA74E8DF742
+:108E100044D0475AA9F7F797E7D822FAFB9AFC5DA6
+:108E2000A2D7847FDF9677E9766DE7BA9ABD4018BE
+:108E300010886274CEE0FDB2989F5EC7F397B3EAE4
+:108E40002C760BE0F734CA17EE0B6E56B9BF68E507
+:108E5000F2767A675F3FE615661D67CE00C0B38E77
+:108E6000AA4E07B4DFB7E67E3ADF71E73A8575565A
+:108E7000C2E2AE27D64C42713BE7F4AC4C81F6E738
+:108E800036F2F328506DD3C55B07521CEDC75BFF6C
+:108E9000AC384BCB3FE9F1BF2907E2AD18F8C5C9A3
+:108EA0009C32FE79DCBE1BD8A8A8DFA5F86FF67A45
+:108EB00028AEFAABB78ACA41F5CF96A6C23AFEA64B
+:108EC0009C7C6408CA516C3CE54F9ABD35B439F8B6
+:108ED000D786FE17C7019EB6DBE2EDA83FFEEA5D2E
+:108EE0004CCFDBF846F0E9D04D8D6A2AA3F63B86DD
+:108EF00040FB5DB678DCEE88B00FC7E9AC3F7F730E
+:108F0000F7C2819DF1B9B6DEAF7FC5E9DD66C7372F
+:108F1000CE88437FB5F1F7893B06219D63E2EDC81A
+:108F20000AB3C5399C2FD7727D74C61AFF02E65169
+:108F3000CFAC9BD809E3C33B4D2D6627F4EBDC593E
+:108F40001987F9822F8C4D71762CA17D00E761F491
+:108F5000ABA807079733DA1F1C1C303247266DDD9C
+:108F600013FF0C6A36FA316EFE06F70DD18E5F8C58
+:108F7000E6FBF7623FF0CE6D3CCFD6965711F985F0
+:108F80002162BD1D7213B47D207A5E5AC49F7FB5E5
+:108F9000EEF571D8DFD90D263BCEF7AF1B4CD4FFD1
+:108FA0005C88EF0DC08F6736F2F3027377409C9CAC
+:108FB000897A4421FE9D0BFC6B45FE5B687299E348
+:108FC0002FE5CBD28D3CBE9E5BAF50BCADF1E75CD4
+:108FD000977F04E15DF0A915FEFD0CA6A303AB5F2E
+:108FE00089F8688F5FFFD17C803537723E40CF0FA4
+:108FF0001ADE34BE08F12923FED4E89F50DF7758EB
+:109000002ABDE0237CFA4A581EFA0BCBCC2C0FCF9A
+:1090100043F90CD14E94FB1FA2E27A631E6AB1950C
+:1090200097BF8C8E5B8FE50F51197E9CF70F06FB67
+:109030007E8CB3BCB999C4B7BF541D26057E9D98DC
+:10904000D4544666A0D4E032A01D5C66213DA2D770
+:109050004339B9220F98CBA81C96CBCF899B580DCA
+:10906000F9175A09FE403AFA2F95310917F0287975
+:10907000BF173A4FC4FDDECA2109F76683E739F806
+:1090800085F48946E0F3CAFE099BB3002ECE4DE37A
+:10909000709F844213C0B5B51913CBA0FD2DB92E16
+:1090A000676ED8385ABFF0BC3F3E1F99E219908BCB
+:1090B000F6DF6C5B8576E06F4ACB02831A6A7F44E9
+:1090C000619F6E574270938965A0BF3DAC6DFE9164
+:1090D000CB55B9AE1B72233C9FCED80ACC4B4CF774
+:1090E000BD794C217DC6DC56A0E778C17FD3ADB6F3
+:1090F00000E9B955A6E636FEC8423D156F44BA8F61
+:1091000013641F6F0C34E2FB3DD872FB9756721547
+:10911000D7FD9CD8BEFE0741655F6AFDC1FAFE66B9
+:1091200082F5025D1517D01A444C01244F057DA726
+:10913000EC78F347EC77998F3545111DA6DA910F3E
+:1091400015E631FC0CE5FC18E08B3E58023F40BBB5
+:10915000459BBFDD87623147F3B33C45E42FDE63B7
+:10916000E7EB619EC1C4AFF70A7EFDCACB6A3055FA
+:10917000343E188CC3A3B0CDE302B9A81FCA554F23
+:1091800015D2E1AB75CBD21601FF7CFB9AC539161F
+:10919000DA9FF1BF1E8776759EF0F7D945357003CB
+:1091A000D41FCCECB17E75187F2DCCE576BF39335A
+:1091B00090711FEA994C1EAFB28B7B33EE83F6E5BC
+:1091C00059A30A5713165C77E786ED4F8E33463E58
+:1091D000BF31298DFBEB6C03B7C71623F3C52650AF
+:1091E000C9E2004FA3602E45782E156095F6F3FD79
+:1091F000D41EDBC5A15FE39891CCF77B981BF59655
+:10920000465F8D6E97D013A68C7EBDC1CA4CB8DE6A
+:109210001E6C9D1DED9346D7AF843C7E65E572388C
+:109220005CB5919E5AB499E7F516295CDF2EDAA950
+:10923000F0FCE625F676F34AD4C955EB66903ED3AA
+:10924000F49803FE217FCDB5BBE3038E7FC0EEAE65
+:109250002BBD2A7DB65ED3677D595FE4BF2BF94BEA
+:109260009A1E03F2BC98DBF11AE885288375CF16A5
+:10927000731CAE4E7518112F1DAD4ED4E78B9ECECC
+:10928000263BC92EAE65E1EDD8BA44E2DF95992AB6
+:10929000D1B5A2219539E0D19C0685CEC98E6D4805
+:1092A0002438AE3585E08A3F742EC175B7ED83FE54
+:1092B000A13BC1675F78BBC0C3F33456ECDFCDB4CC
+:1092C00079E4D7A3FD39678379009EDDB65594779D
+:1092D00074B3B67848F9594118B806E5CE65F2710D
+:1092E000FA586B49FEC5BA1609B95A7488DBEB45C2
+:1092F000C3F87EA1D1D7231EE96F3AA8323FC03709
+:109300001D520B03D07499D0E79664037384D12D5A
+:10931000CA11CD1C61F4613E5710E3ADC9825FEE06
+:109320008FE27A3F262F416A37D9368BF82798315A
+:10933000E220AE37D6D945EA9779B87FACF1D5248B
+:1093400091371FC75A96A39DBC6932D487F5672A07
+:10935000FE8EEC86A958F6AB012FA72FC74FCD1A6A
+:109360003FF5603D889F74F801F9207B7FEE28BFB0
+:109370007F025EC96F8B019E74D0C4FC50BF42E077
+:1093800005FD568C7FCEB962496E34BE0BA2DD035B
+:109390003D175F24E3AD834BC65B62B98C9F8E6E35
+:1093A000191F9D276749F5299E9E527D6A553F09E1
+:1093B0004EAF192CB5EFBAB84482337DA3A5F6D9C8
+:1093C000AB2648704EDDAD52FBEE6BA74BF53DFC76
+:1093D00073A5FAEB362E92E05EF5BF96DAF7695880
+:1093E0002AD5F70DAC96EAFB1F7C4C820B834F49C4
+:1093F000ED071E5B2FD50F6AFAA3543FE4CC6B1226
+:109400003CB4E50DA9FD0DAD7B2478187B5B6A5F4C
+:109410006A7D5F8287DB3F91DA8F4C3E25D58F7264
+:109420007C23D58FC9FB5E8257083FA7C2F95FD264
+:109430007B4188D8908F73D23C43BB53DEE78C11BD
+:10944000E5EFD86D0A4BC4F8E7E0443BC9FD35C6EB
+:1094500081C3BB8B3844F0F10566BB1DCFB35F49B8
+:109460002F66A33F51887C3E96EE559DABE7F90EE3
+:10947000BD5DD7FCB97830CBC6B0713BB8AC10D06D
+:1094800087E0C472BB047774274BED3B4F7648F5F9
+:10949000299E3CA93EB5CA29C1E9354552FBAE8B90
+:1094A0005D129CE92B97DA67AF724B704EDD64A9B1
+:1094B0007DF7B51EA9BE87BF4AAABF6E638D04F7AC
+:1094C000AA5F2CB5EFD3E093EAFB065649F5FD0FF2
+:1094D000D649706170ADD47EE031BF543FA869A316
+:1094E000543FE44CBD040F6D6990DADFD01A90E070
+:1094F00061EC90D4BED47A448287DB3F92DA8F4C01
+:109500003E29D58F729C95EAE77DE30CD0BED476D8
+:109510007EDF55F3E7C6E47D27B5332581BF8FF99C
+:109520006F16EDC4F3FEEDF9F99A1F58E1FC511ADC
+:10953000F70703F7CF5FEA9E25FC7FEE272EF3B9EE
+:10954000E97C5E021E78053989F729C47F18624DCF
+:10955000A57C6412ED5B90C974E07937F083004814
+:10956000306466621C1213F263D37EEE7FF57EECEC
+:109570001B10E3A05F7DB6BBE7CF289773EB5F1DA1
+:109580008171CE1CE65B89F300BB1B8FFB58EF4655
+:10959000C9F928AD1C65053C868D7728AA2EADDF5C
+:1095A00065E47794B599DAB7F52BF2550AAC6F51AB
+:1095B00058FF8F40FC650439ADF3829C41A0FD98B3
+:1095C000D74EF013DE64829FF43AA85CEBCDA3F291
+:1095D00029AF93EAD7798B087EC6EB22D8EF2DA767
+:1095E00072BDD74DCF37782713FC82D743E5466F3E
+:1095F00015957FF4D650FD4BDEC504BFE2F55159F9
+:10960000EF5D45CF5FF3D611BCC9BB96E02D5E3F41
+:10961000950DDE8D54BEE1ADA7FA1DDE0682777989
+:10962000030407BC0709DEE30D12BCCF7B8CE0030B
+:10963000DE262A0F7ACF50F996B785EADFF1B61207
+:10964000DC2CF613BEEAAE48F7183598B132E207C3
+:10965000CDFF1D87710F324791E9AF52DCA38B3FDD
+:10966000F4F4F85A8C632A01F717FD9F2EB9EB9793
+:1096700085C505DF8BF1EE8F66BE2890875A03CF34
+:109680000BD42630BA1FC6847F3E5BF0254BE27EAA
+:10969000F92C31AFD9420E0A913FF3883FDFB996DA
+:1096A000384B8BB7ED191E350FF933DDE0A3BC83C2
+:1096B0008DDFC3EF9FE131E7811C9DABB9F3008DD6
+:1096C0006777E6E220159640C79B319F7448A53C1A
+:1096D0006C7BE3558B7B12EDD6EF3A9B86F6A8FCAC
+:1096E000EF2AE5EBDF35C54EC67C4B721EC74B72C9
+:1096F0009E412A7764B83BE33CBFCAA979E16E2555
+:1097000074FF7F3C86E620E795CC61A273B8CCB5A8
+:109710001FAFDEDC040E1FC237331F9525E91E077D
+:10972000BE7F0B0418087B065B3222AD473F9F9E2D
+:1097300079DC7FEF996790CA8F32DC3D103FA773C9
+:109740005CD27CE2BA3AC47D9C9667705EFFB1F34E
+:10975000BB2F95EC10BEB5FCC6CA61E29CD6424553
+:10976000DB07E77EA295697E22D54FBD97E77B3464
+:109770007B79BCADE4FAF05C8D89F4E65425DA8996
+:10978000FEF6B99A7BFBE07EE16D10EFE1FEA9A643
+:1097900047A7026C00782AE3E72EA61E8F253ED34A
+:1097A000EB57788FE17EDF54F03F317E54BAF27C84
+:1097B000CABBEEEF4CD82F4B6AA17BABC037A3716D
+:1097C000FD7307A9F4FD86770DFE5C45257E312BE0
+:1097D00030FFD949C02F11FC058D2F16887B39DA4F
+:1097E00073E0B71B913E7FDD36308FF669760D72E0
+:1097F000203E9719F8BD3ADF5B2A3F9781A97C3C50
+:1098000037129FFF2CDD2F40E702E9372896EE172D
+:1098100034AA6CF1AB11F4E9BD828EEF269BCAFD30
+:10982000D4AFBCAFB840D075816857B1E7503ADECD
+:109830001B5C70D04471112B68CA7747385755BDEF
+:10984000F8C15F740BE3F3EA8693FC3C166BCA0F16
+:109850003F87F5B0E06B8DBF5473ACE7595BF8FC04
+:10986000F8F8C0E7F7083EFF12FDFE711647FCCD81
+:10987000F06A13A02600A5E7DFEC749E4F3BD737B4
+:1098800093B9A99C0DE446BE76FBD6D0BDFAB9AC1F
+:109890009E9E2F289A918170356B294B86FE6E5AB9
+:1098A00055BB3F196637B16ECD70CC734FF04FDBAF
+:1098B0008F65E506E54B9F83E464058EDFA4D4AC99
+:1098C000E802E3DDFAD2B01598471EA7723AB0B7A6
+:1098D000391D809F5C6AC2A5EB03B97848C805CDE5
+:1098E0005F938BA94B994B490ADD03699393A2BB04
+:1098F0003E4BC53D16630B9D43A9DE6549C0FCC9BF
+:109900005CC6ED76280FC4EDB526075F9B38DDBF3A
+:109910007E59A17B365F2B8CBEE7D09EDFA0F99FDE
+:10992000207F5CEE3E8DE1FCAF8ABC5E8627B95F8E
+:1099300076C83E7F6DF00F88CB26FBBD11D7632A1A
+:10994000F13CD417CFEBBDA23897C15CBEEEE0CF9F
+:10995000E0E704DAEC00FB392694277CC4C4F376F4
+:109960007A7F575B477BF3B498990FF7B394A203C0
+:109970003FA21F72E97C3DC903002FCB904498970A
+:109980002C713B22CD63B918FFE04F3C1EF7A53385
+:109990003A17A4C7A762E7E3B4975FB544F3F96841
+:1099A000764A9BE7A5F3E2F47A3F2F93E8AACD0F1E
+:1099B00034459E1DC6371AA39D28AF9546CF7B8898
+:1099C0004F2DFFA6C5C50733BF227BC02E2E4BE30C
+:1099D000E78F03EDD9E1E6B6783C2B6427B53C165A
+:1099E0002B8E9C8F745BEDA4BF263027D98B1EEC89
+:1099F000B8862FCA63A9B84348795E0FADC382FA0F
+:109A00001ACA28CCA390BDF4937CC6E0BC685D4123
+:109A1000CC88B03531718487C1C718E9E9C1B8066F
+:109A200058EFCE93CC8FE7A91A2F4C2A8D85FA9D3B
+:109A3000DF1A290EFA6DCC2BA9F81D899D673F4CC2
+:109A4000C57C4FED852D040F681E7196E7CF8E4FB4
+:109A5000C1FEB69F373B2CE4072C243C6879CAED45
+:109A60008C39711FB4E8231BDD332E3C5A1F437819
+:109A70001379B562B1EEE2F33C1FB20B81411007DE
+:109A8000B4985920CC5F36D965B88885C1993824F7
+:109A9000C061798E6B8D1F637B883CC84036303C3B
+:109AA000AFC65A1322DEA7D2EF2316287CDE67F258
+:109AB000DC9D7A50FE6C82CAF1FD7715F17583CD7D
+:109AC0009F82FE6DE39C1752D0DFFD6DCCDF098FC6
+:109AD0004FFD644E41BCD60DFB0FB22375F06E10E6
+:109AE000E35FA33F8A51FE6B3EE5D76E1076F6A981
+:109AF0008B9FB364C0675D1123FBC9841DD6EAEB5D
+:109B00002E9EAB427A5E28B63A502FE48A7C68EDEE
+:109B1000F5FF99DC14868F9DE0570780C0DBC1AF4D
+:109B20000E80EFBF0DFC6A84F1DE29969BC1AFC6A3
+:109B3000D20F7E3596CF805F8DEDD0AFC6F229F083
+:109B4000ABB15C0B7E35964F825F8DED9E00BF1AE8
+:109B5000CBC7C0AFC6E77517A797D27C8E31BA5F67
+:109B6000BF3426CE80FA15E61F8D79A1C3AE7ED113
+:109B7000888FEBCF1B24FA1637474BF0E0D309212F
+:109B8000FA22FD8F7791EA071CCD92EA337D3D25BD
+:109B9000B8EBE27E128CF9A1F0F753AB4A2438C53A
+:109BA000335A6ADF79F20409EEE8BE556A9F583EDF
+:109BB0005DAA7F344E4747FF3C834C47FE7D850BB3
+:109BC000C5363A5FD91E9F3E26E8A2C18FFF4A9D47
+:109BD0001C296F7B570F83140F741173BBBB8783D2
+:109BE0009EEF3B31F0C5DC02A487816F9BBA5A62BD
+:109BF000BA015D721F37303C5748270E607E76F100
+:109C0000DEE325E762902FF75698A3903EBB5D25D3
+:109C1000D1082FAD30A784F3515DA6A71FDD53F007
+:109C2000F0F569EF3F5A32E1B2FBE88F21FF75BFD3
+:109C30004CFDE8B959280F97E09155D17E6D088FFA
+:109C400013E8FB4ECC5325CD5F2F170C37E953702B
+:109C50005CAB8C4F57D6038887A79E30D239ACB601
+:109C6000FEC4FB5A7FC3D58B314DF997CE7FB78B9E
+:109C7000B707FF370AF1026349F34B703A86217E3A
+:109C80007E27E4ED5F85BCFD56D015E35884999D91
+:109C9000BFA7D1ADAEEAB151B92837457C5EEB6FB5
+:109CA0007C4C417593C89CB5F630BC3E21E6F18CE6
+:109CB00058D73AEC17E08E37BA14C45FC662B78241
+:109CC000F2D6754913C14F09F94EAB69A1E7E9F71F
+:109CD00004A8EC5215A4FAE1EA4BB48E363C386580
+:109CE0003CEAE9E417EBD1FA0DBDFFDA21E4B70B4A
+:109CF0002E3EFF389FCD85F622CE6777F2D2214ADD
+:109D0000A713F57E9CCF25E09A7C84B78975C5F9A9
+:109D10007C04FBC5BAEAAA920EBDE0088DC71CD52B
+:109D200086707BD31E3F6D15F8DF2CF0A47F6F9BF0
+:109D3000A9A6BF3D825C69A5664F8B8E1B747A27EE
+:109D40005A92FB43F80BB7037FE981F2E873AB62E9
+:109D5000FF8AF038B12D5E9A4AFCB426E6F6B73198
+:109D6000DEBEF1A8CAB8BD1DB71FF5E5FBA32C6484
+:109D70004F1B478D4C0FE7BB06B18EAD02EF837CC6
+:109D8000AE13F740FB316E0BE5E3073257FABDD057
+:109D9000DFE8B1AA3300FD1D6DB327EE187EDE812A
+:109DA000DB9309620D7BC64E7C10C77FFF28E80558
+:109DB00047689E5AFDE6F289637A211D839C8EEDE9
+:109DC000E1E74D41AFFD625E7B05BD1A057FEF16F1
+:109DD000F664A7B027DBD19E5890CE45623DDC9E4D
+:109DE0006C16F62488F604CA77853D7907ED099448
+:109DF00005A3B2CB486FE22536B22710A0D07982F6
+:109E000005D2BAB47995A7A912BD4624C548F42A4B
+:109E1000B3254AF525C65409765DCC92E0EBCFF721
+:109E2000D4D929D9AE0C3E3D5867A74A2478C0D171
+:109E3000D1D2FB95AE8952FDF8A229527D85738659
+:109E400054CFC47E18DFA283327A9D4A71AED87790
+:109E5000D2FCA9F7CB55DAB719F481EA0C97DB42AB
+:109E6000D6B64F66C07D32705F1C46ADBF2CA99E32
+:109E7000FCA8A326772A9EDFABAD043E84B2F82867
+:109E8000F869947C04BE06BFB7D03D92FC40F097C1
+:109E9000FA131D5AF87E93B66F3548B7FF343A5F10
+:109EA000DE9F2ABCC2FE94AB673B7E59B7C4ABF2BF
+:109EB000CB40BEC8FFFA6DCCED7B916FB67D047EC2
+:109EC0002AFAB91FFD82FC2FCD6FDBFAC52FC8BF60
+:109ED000DDDA262F1E495E0A85DC6E399AD5D0045C
+:109EE000F2B63959710A5493BC1469F2D224F4665B
+:109EF00079353D1F20DEDB6A72C7A0FFB7F9D85263
+:109F0000D16F981E217F3D4C8F601CC912E4FAE48A
+:109F1000D4507D162756787BC67AEAFAEBA78307DA
+:109F2000EBDA97E8E0D1BAF61374F0ADBAF6D3A540
+:109F3000FA0658F7E5FCEDCD423F68ED0A8D6ED587
+:109F40001941DF0E382AEB57E6AE96CE3D349E9887
+:109F5000457A73CBF195028F55127DF668E31C05A7
+:109F60003CE75FFA7E89D117D31BF8A0E498D1595A
+:109F7000EB08D14FA313C37838ACBF52AB2AC95FEB
+:109F8000C3314EDFF6D6B94BE8E71DC2CEBCA1F314
+:109F9000DFD49FCEBF3F1EF8674B9381E2AB2D47C6
+:109FA0002724627FBB2FCEA4F9361C33D03DB217D5
+:109FB0007B8EBFA9B65B687EDA7C0A3F581A83FBAA
+:109FC000AC179A0CA4FF0A4DEE447B04BCEBF9AB32
+:109FD000BD7E35BE05072A11F1B21BEC109D1B1684
+:109FE000FA54C3CB9E134F12DEB71D5B948878BF23
+:109FF000A1D520E165688BECAF0F399320C1034FE9
+:10A00000727F10ECAE84DF2BCD5B2F17B83322C3E9
+:10A010005DE4F657E90F6C1774DA26E8B43DCA39E7
+:10A0200039D2BEC6B64FCD55E1DF5538D393E7DB05
+:10A03000CEF4E4F9AFCD4047D4B3174E1B48CF0E52
+:10A04000B1D7AB3511E851DC6CD0D909D96FB8D68E
+:10A0500078F5543B7AB1BDF735BD58A27D3F2578E0
+:10A0600063C4F3B1213A8873953A7C6A7EF495E92A
+:10A07000A69D47D7D1AF9DF743FDF8F4F134BB0E51
+:10A08000FB69AA247BB326E65DA1CFDF257DFEDE3A
+:10A090008F429FFFD889FCA423A33AA7A31C1D6964
+:10A0A000D3E32C365C8F6BE72183CDEFC584FBF9BE
+:10A0B0006EC18F3B5DEF8FE983F4ECA6FEAFFA3BF8
+:10A0C000EF0A7FE71DF477BAE33E10F7770EB96623
+:10A0D000707F2759A1EFC52C8DB9DEE889C0A7FF95
+:10A0E000D7FD9CF145B29F53E194FD1C6DFF60B715
+:10A0F0005DA1735863F264BF6737FE827926ABE2D5
+:10A10000C77B5CDB5D132FAB870342BE0F09FABC34
+:10A1100029F4F07E1137EC40FC135DCA055D78BE72
+:10A12000A2F8BCD3E674207DAA785C96574DF1F472
+:10A1300050CDBE7B6BA8FD910BD3CFE3FDFEDDF6CA
+:10A1400018CAB3ECC6F9C0128E983CE7F1FB15BBF8
+:10A150005D8A636984B87E488BAC07343F41E3CBAA
+:10A16000DDCD9F135FEE6ABDBC3DD5F497D6EE4DB5
+:10A17000F67A29E2E7FA66C6306EB892FED1DBC500
+:10A180002B8DA36F3FC458AF46B23BFA71DCAD01D3
+:10A1900015CF3FEF6C0926E2769D3B7048C57BE00A
+:10A1A000C52D019AEF3E97625733A95D299E8B7E9C
+:10A1B000F3E27B63F0F9AEF3468385F699EC24B7BE
+:10A1C000C5423EDFB968B03909BF2AED73045A3E73
+:10A1D0007F10E5D56755E9BEC8EE8BFD92C2F1F65A
+:10A1E000E8752AE993ED651603E697B79F378AF37A
+:10A1F000D601F21F76B466D9B0DCEE02F9217D11EA
+:10A2000024FCFFFE3A7E4E7527F4C7F58483E6A151
+:10A21000F141E0BCA13CD2F7767E2FC61B72F1B3B0
+:10A2200018C4CF81F37B62505FED6AE1E30C59D231
+:10A23000148371E6DBAD86589E57E99F84CF1B8758
+:10A24000DF6FEB87EB6A31F0FD1BE1D768E3ED2EA2
+:10A250009B4DF9FCDD2D3C0EDB7D9EE78FB6FBF9B7
+:10A26000B93526F498D67EFBF909637A61FEC06F92
+:10A27000A2F643987F651CB4DBDF71EB7574BEC634
+:10A28000378F85EBBD52BBECE794B4E8EC93671EC7
+:10A29000C981468723DF4DB8B192CED7733D39CA05
+:10A2A00028EB975DE797264DC0F16D7C7CE6E7EFE4
+:10A2B0006BF119FE18C3BEBB523BFCE68915D8DF13
+:10A2C000667ECE6C884DD6674786CDF8FD7C3CFF18
+:10A2D000BF2986ECEC765C3FF67F9451FE6C77F9F3
+:10A2E000E3A57198B76E664EEEC7C97ABDF4C2A6F3
+:10A2F000BD71D0FEBD0D0AE177649EBCDE9DAEEC63
+:10A3000087310EBED0CCF1ABE59334B9DCD39C7071
+:10A310001BE9A732781BF0F85EF9EB94C79EE39730
+:10A32000FB19B831469AF7FCA6045DFC26E7C7C1C5
+:10A33000DFD4F203B68A01A1F8ADB095E7D707FEE6
+:10A3400034A17F00E65B5CC6CFCFEBF3E2A38C16B3
+:10A35000D9CFD2E5C50BF57971BD3D17FED800B157
+:10A36000AF7189FF23EC9C966FD8660A4C715F83AE
+:10A37000FF30C808A10B9DEBF5241600FEDF10FE90
+:10A38000E52073DDDD29202A5B55DF1016E6173046
+:10A39000BB8F250D08C5B7834FCBF140D171992FE5
+:10A3A000217EFC12E3C955B8A74972E0E379D0AB2E
+:10A3B000F433D6C4F46E6802BA0E3CCAC47EC7BF7A
+:10A3C000EC45BE6AF842DBCF00D7A313EECF33F2E1
+:10A3D000B71BBF3013DF6D19CEED94E6A768FB34D1
+:10A3E00037B2A6E5A50A9ECBB6AE68027C6E3A32BD
+:10A3F0002B7501F4FFC1C7B4DDC9B6146ADFA7AF7E
+:10A4000093E2CB815A1EEAB8C1975880FEBA4592B2
+:10A410006BADBEE1F8D218FCBEC885A081F8B4F1DE
+:10A420002333C3BF0FD0B0C342FB390DC7CCB4DF59
+:10A43000B26D0797132DEFACF9F96F097D7E50F8D7
+:10A44000BD0784DFB24FF82D7B84DF12107ECB2E48
+:10A45000E1B7EC107ECB1BC26E6E3A2EE46F498CD6
+:10A460009F7FC796E765B579DED1BDE98411165C9B
+:10A47000FDF180B50186F65C9693510E594E462645
+:10A48000CBFA63B83D556A5F6ACD96EA87B1EBA413
+:10A49000FA1B5AFBE9E291C1BA78A444E78F8C9188
+:10A4A000E5F26858BC4BF1B51CEFDE141EEF6622D6
+:10A4B0009D781CB8ADE931A2E3B6D359F1E17ED95C
+:10A4C0001B426EB69DE6F6F98D33E76223F96D67A0
+:10A4D000043DBE16F468167ECA4D29AEDBF30B317F
+:10A4E000AE3867C6731FEDF1B3F6BEF6DE19FFA9ED
+:10A4F000B870FBF705058D21F8DB2D9FE452FEE4D3
+:10A500002AE563592C3FE7B65989A6FBF757BAD716
+:10A51000F29BFC2CB10F51D387EF8BD60CC4F20504
+:10A52000933B15EF3F6D56DC53508FFB7E678EF8E3
+:10A53000F72496E72B9AF037A07DE04792E1E725D4
+:10A54000C588FC1525C067996739E2C78AF13A3496
+:10A55000526D6E86EBDA64620D68E7998B39EC9D7B
+:10A5600018172118E7875E9ED5F9302F25C8F78F79
+:10A57000C1BCD2F73EF068167E770B4BDC27B35890
+:10A58000F9BD83E87C4F5D7E21FF9E6D7C3FECB77B
+:10A59000249BEFA306487F4F11FD1A6276A4933DDA
+:10A5A0006D4FAFEAE25C364FBE8FA2E79706A16718
+:10A5B000DFC8744F89F41D8C3F0AFC6CFB6A9C8ACF
+:10A5C000E31658E35CFCBB902E15EF81BDF1F5E876
+:10A5D000986911F86C7FEF697FCC0FE38382608DFF
+:10A5E0002AFE4E8541CE6F190248EF0B3633C9F56E
+:10A5F000605C70C2A5FD0D3923FB79839AE4F83FB6
+:10A60000B4BF5FA7E079B3367E428220FD8FF0EFC2
+:10A61000695C899FF4FBF6C7F3B5F3929E4FF01C7B
+:10A62000B11A6FA3F3359B8E58D7A31FA9CFF71D7F
+:10A63000FE80EB71FDFC1B3F98948AFED7E6A137A4
+:10A64000A7A21C6F41054FDFEF5938C925C1B07E65
+:10A650001BEA7B26BEB355CDEB476970CD243C3F4A
+:10A66000B365186FFF49FE9127F17B605B6E13F5B0
+:10A67000BE4778BD06B3459386216C32103CA917BE
+:10A68000B487FE7EEAE93A8EFC199DEF3A81E59F98
+:10A690005076A01CD1D3F519C2C791C760DD477BA6
+:10A6A000B84E86C3893D5CA7C2E1CD6DF6A5C5163F
+:10A6B000BE7FACF1E1E1631384DDE1741FAFC5350A
+:10A6C000C55797E7FF77C1A76F0B7D7548D88F37C0
+:10A6D00085FDD88FF683E2616E3F1AC5BEF16E61CB
+:10A6E0003F768AB8371477B9857F3159C4C33C0E99
+:10A6F0002B185ACAE35EBB96E7CF30468A87C61549
+:10A70000C87EE2D87CD9AE8CEE9628F169795AAA37
+:10A710002E4ECED6C5C9B25D2931F6D7C5C98375CF
+:10A7200071B21CF716378FD6C5C913A4F6C7F31D2F
+:10A7300044D7A2E3B7EAE2E5E952BB101DE57D9BF1
+:10A7400010BD6644A4E396E2190FFEDFA263E4FDA8
+:10A750009AFFFFE8F80FCAA3CD20EDDFE8CB77849E
+:10A76000FD7F4BD88D83C20F3820F21CFB843FB78E
+:10A7700007E9D81DFD3AA7F0EBF8390E2D0FF28648
+:10A78000C8433588731C5BC4BEDB2691875A56FCD0
+:10A790003D3FC77191093ABE1B918E154ED9CF1B13
+:10A7A0009327D371942351E7F7C97EDE70BBECE7A2
+:10A7B000955A653A0E63FD757E9F4CC7A12D253ACB
+:10A7C000BF6FB4CE4EC9E738C02F78B45721DE4BE7
+:10A7D00090CF731406E5F31C7AFBAEDD57D4FC86EC
+:10A7E000363FC12BEF336F421B8AFB452966FEBD06
+:10A7F0000DA3A70BFA1D1ABEFCBDF839C42D9FDCB2
+:10A800004EF82C447B1EC17EFFA917B7FB7FEA657B
+:10A810006FBB1F19DD0FD39B3EEEFFC48FB5F373E3
+:10A82000552C88DF9FBA8CDFF4275CAFE62F19ED3B
+:10A83000350CFD08D562F0E1F777996AA573778743
+:10A84000DBF1A34EF5CAD4BEBFAA60BF9F887E9538
+:10A85000E237F9B9BC5EAECDBDF05E4FA9B305F3EA
+:10A86000E29B3F323B6B919FA3F87750F4FED6E119
+:10A870005EB9D49F863F3CFFFF0BB48FF8A158FA16
+:10A88000DEDEE73AFB090B867E5E88E6F091974FA5
+:10A890004DF2A585ECF527BD2E903DCDB57599817E
+:10A8A000F1B2B2D697C0F72B03245F7ABFAD5DFF3C
+:10A8B00057E7A79DCC7305116FDFA35D2EA47355D9
+:10A8C0002E63BFF6DF7F21DA7D17FF1E8C4BC5712B
+:10A8D000353C69F58704DD0F8BFEDAF0A2F1157EB9
+:10A8E0009F2621EC1EAC6EFE1ABE561ED91BC42339
+:10A8F0008CD7BA1E6D1D11F8C77D05BFFB7BA2AFBB
+:10A900008E7FD858A7B8A71BD9EF33093F329CFEDA
+:10A9100083695D7E6DFD6C783FBCFFA2DD5BE7FA6D
+:10A9200050BB339360AFB367821CDD7E54A5730EBA
+:10A930004CEC831BDBE859ACA09D318E505862581B
+:10A94000DE55BF9FA8CF1FE8CF9515377791E0EB75
+:10A95000CFCBE7CA5C177B5ED6AE94D986E8EC52C3
+:10A96000A9CE6E8DD1D9B5893ABB27E7C58DCCA8C4
+:10A970007D6748ECD72B0EFCFE8E916328BC5E7C75
+:10A980000788E37B793BF2DB767EB69783F0DE26A1
+:10A990001FEB9883D3CF27DD33516D1EA2F3A303A2
+:10A9A000343BE6A4B8D71C1844DFF3343BE5BFCFF3
+:10A9B000E0F75A3F2ECBC17B368CCA67BCF68FCBF3
+:10A9C000E83E4E32954F791DF47CAD378FCA27BDD6
+:10A9D0004E7AFE84B788CAC7BC2E2AEBBCE5543E2B
+:10A9E000E47553BBD5DEC904AFF27AA8CC02F706F2
+:10A9F000FFDE40968F3961C62C7B158C1786E74C9D
+:10AA00001FCC230C8F5D17DB2538BD26596A9F5A52
+:10AA1000E590EA533C79527DE7C94E09EEE82E9263
+:10AA2000DA2796BB24B883AB5C6A1FEB744B704C7F
+:10AA3000DE64A97D94C323D5EFB97E707CD365E431
+:10AA4000B9CEEB3A817858ED759FE0782A3FC1F195
+:10AA50003399CAB9BD3B107DEDC67A17DA6D7BBE5E
+:10AA60009DE1F976B395DFFBEE60B42B1DC2FAEFE2
+:10AA7000E082FEA4F9427F523CE7E7E789F3DC2756
+:10AA8000E4794F96DE0319243BA9F931C3D5B458B4
+:10AA90008CC71E34D9FFBD3FCCE381E12AC37B2B99
+:10AAA00047CA26525E04AF6CB2087AF40BE19FC627
+:10AAB000F4B652BC38FE0985E23B584905E61167F9
+:10AAC0001DCD7686FF3D28AD3CFC1BFEBDA1983D0B
+:10AAD000DB1C98171B5F3C2D312A2CFE1B1FF8B185
+:10AAE0002C85FAEB3B200AE6317EED34F38CFCD06A
+:10AAF000FAB476B39E90FDD110FFFBADC21FA775CF
+:10AB00006AFA69B57D3D3D5F9D77F97D9BB3625DD6
+:10AB10005F097FED0BE1AF9D127EF749E1777F2A58
+:10AB2000FCEEE3C2EFFE58F8DDC784DFFDA1F0D7ED
+:10AB30008E0A7FED3DE177AF147EF7EABCF5F4773E
+:10AB4000AD2E6C54987A99F3A57337C8EBAC5A279D
+:10AB5000EF1BCE7A42F6BB673E24FB6BD397CB7ECE
+:10AB6000F71D8B657FEDB61AD95F9B5225EBC75B4E
+:10AB70003CA5127CF364392F77935BDE37D4E8343D
+:10AB8000B15CD6939664D95F6B6FBD5B03A354FC35
+:10AB90003B2448CC5361F630EC7BF0D279C702BB42
+:10ABA000AB14F76B0A997B19EEE70C3504DFC7FD90
+:10ABB00026F6A14ADF816CC0370681BC5E1830766C
+:10ABC000BC23CCEEF864BC4E3D2EE7476EBD47F685
+:10ABD000832BE7C9F18CB95CF6835D69F27EEC44A6
+:10ABE0009DDD61C21E9AF9EFACCC7D793B648899FA
+:10ABF00047F795AED51E9999FEFC18B747346E9667
+:10AC0000544FF628AA0F3F273140DC53A88D1AF87D
+:10AC10000EEEDFEDF988DF2F00B407BBC1FBD733A1
+:10AC20008E6FB375247D3F6EA789DF1BD89D62733D
+:10AC30002E85AAEB2FF2FB01ACD548E7C73C786F15
+:10AC4000240BFB95CF8F15068DD2F932B3AE3E0D96
+:10AC50006DE265E7C3CFD1FDEFCD479CE3E8C3FAD2
+:10AC6000D0F988A6C8F70DDAFC381D9F6AFAA7202C
+:10AC7000C0FDA38276FDA3A9F49D31E3878CEED9B4
+:10AC80005B0C2D679EC3FB515FF23CEC3026C76D19
+:10AC9000378E95E3B6E1F6CBC76DA31C32BF8EC9E4
+:10ACA00093F5408553D60397F8354DFC1C627B7EA7
+:10ACB000CD4D7DB2B47B3A849FA89C7D317C1F939F
+:10ACC000F3CF10B1CE47CD6EBABFB23C9D119D8679
+:10ACD000D8F979C55ADCB7C1F37F1FF07B2F46E660
+:10ACE0004EEC83E5E911E2FCE25827F5D7CCE955B3
+:10ACF00004FF7ECEBAF47CA2256894BEBB61646179
+:10AD0000F485FA39C85F1D437CF47F675EE2FB0877
+:10AD10001A9FD912AEB07FE793FC40AD1C1674A900
+:10AD2000B88EFD76BE8FBA3F5813C4EF447E9FCCD9
+:10AD3000F314F7A74D30F2EFB6B86CC3812E23C4DD
+:10AD4000FA8BC43ED9162F0BA23FB7C96BA552DBB5
+:10AD5000FF5C99BC2811EDE6960C4F2A9E0BDCD2C5
+:10AD6000B1C372067A7AB3A9435AA47B048DA68133
+:10AD70006467B734A618D10F1D66B41BE97B52690E
+:10AD8000D355CCCF8EC4FB26490833DAA7DBE40DBC
+:10AD900004CBE85CA887CE11C13A4AD18F2DB34FBE
+:10ADA000A3BFF7D8F801C88503FDE30E53F1BD7DBD
+:10ADB0001DF9F96B8B9D9F6F1D91349BE855E0E465
+:10ADC000DFEF2B48B339FDD85D32FF8E4F15FCE322
+:10ADD00074E17602E45EFABECF40160623BD74F03D
+:10ADE000D37A3DA03B97B8F298383FD71479DFE685
+:10ADF00033E1576C117987E3C2AFF858F8154784EF
+:10AE00005FB15297077A5FF815FB441EE880C8E7E8
+:10AE10001D14F9BCB7845FA19DBFD6F822791573C4
+:10AE200058E2197B771AC773CA2AC55F0EEB289DB3
+:10AE3000C9E1E4C57C7FB4ABA7CE5D5280F526E7BF
+:10AE4000485847F2E4BAE1B88E94A92D744F69B21C
+:10AE5000C7EC7029783FE929BA17A5DD0BBB93A38E
+:10AE600086DD3E7304E9DF3B3DE2DCB1DA5C48FCA1
+:10AE7000F58489BE93A47D3F6EF24CF97B4AD3756D
+:10AE8000F8BD5D079B15AE47DED1E4A23FEB1F8EF8
+:10AE9000F714D136EA4E719E172F5D459097B50293
+:10AEA000EF1A5E1AAF1F1DCBD7C1F7432DA29FA388
+:10AEB000C5B7C6623F1FA4F1FE260879D0F7B75A7E
+:10AEC000EB4FDCA78916F47FB4E7E5CF9D1EF63281
+:10AED000E99CE961419FB67E4B1E34E1F7B4270738
+:10AEE0001E48477909DDAB71C5F2FB2B63FF3D13AB
+:10AEF000E8B45ADC43D0F4EACD427EF5E37DE0BD10
+:10AF0000FCFD9D0F4AA698F07BE837057EC5FF1E25
+:10AF1000B0B12639FCBCEF07383FD095F7DF743766
+:10AF2000FD1DC96006E707CB8D16077E67B06B9ADB
+:10AF30006B05E23139CD395CE447C99EFD3FEE81B6
+:10AF4000191B0080000000001F8B0800000000009B
+:10AF5000000BED7D0B7854D5B9E8DAF34E32810958
+:10AF6000049C604227E161AC04262FF260083B108C
+:10AF7000344524131221981026099068D11BAA3D4C
+:10AF8000D27B68B321218418799C6B3D50090EF85F
+:10AF900068CFB99E1AACD7D27EEA8D8AD6DEA312CC
+:10AFA0007A430B6DC5F092F66B7B2F5ED49ED3A3D4
+:10AFB0001FF7FFFFB5D6CCDE3B93800AADF634F920
+:10AFC00074B3F65E7BAD7FFD8FF53FD78E93C18F57
+:10AFD0008F314BC25E65423263CE62858D87F6A6A5
+:10AFE0009245694333185B5EDDBC98CD64EC12FE7C
+:10AFF000CC83E7CCA60D65E24BCC724981FF8799E3
+:10B00000CF361BEFE31DC37376291DFFDFCA82898C
+:10B01000703F78CB6F719C6AD6EAEF87FBDD79EAE7
+:10B02000040F8CCFEAEC67875C8C65C2EFA58CE8D7
+:10B030003CF25ACD6CF45C8EB76431F497E3339AEA
+:10B04000CFF07C6B17F339C742E323806E22BC2F0D
+:10B050009E6DB5855D385F77F05E97EA662C23D5E7
+:10B06000D2E004782AD236AF64B06E56E9F44CC30D
+:10B07000F7030BDFCECD836BE65A1F2E0FFB354354
+:10B08000BFE33776A6F96644E1DABA8D9584609E0F
+:10B09000AD697FE75D9B88FD3E6C0B613F3BABE993
+:10B0A00083F1BBE7FF2E35DD1DED7F7056E94CFFC8
+:10B0B0000418B01CFE97C2D8744728C33F63F87ABF
+:10B0C00019D3189B80F88F670CE038D3A0849D00BB
+:10B0D000574D0FE06F0C3EBFD082F71B7A9CBE6EBF
+:10B0E0000490A9EEDB609D6BF93259C3B48EFC7EEF
+:10B0F000B8AEED01BA61FFDDF6D3882F17FC227ED2
+:10B10000D35A6DA723F8C2FE4CD7C6794C6D07CE33
+:10B1100001F0DEE24F4C7EF726F8772ECBBD64E5DA
+:10B12000F447FCD688BE710D556319D2D30BC82CD9
+:10B130001ABEAE15FF6665FDE319310CCB8FDE3FFD
+:10B14000B17A4A7C08DF43BE7109BE9A453CE97377
+:10B15000CC46FA73BEAA167C05ACF912F19566D7F7
+:10B160002270C2BAD87DF628DF6518C66308EF32B0
+:10B170007D9BDE578F4D05F8570AFE5F1968E1F891
+:10B18000BA8FF3A30B6E8A71A2FC06E3044DFC4751
+:10B19000F49A28E084716E2F2BFB1F3F059C3DBE67
+:10B1A00033E336A4D3EDDFB4322BCC5705DDB05DED
+:10B1B00055A384C3D05E16B899E461997E7CB85FCC
+:10B1C0005D6D3FABA7CF3B1BA7D038ABCAF9386C3E
+:10B1D000A36E7E826F27E133C8D8168F8EDFDE4DD7
+:10B1E000675319E0F1A53DCDFBF0FD73BB9C0CF955
+:10B1F00088E1BBB391EE1CAFC7807791FFCF6F534F
+:10B20000C20700EEB37B9C04E7BB6B943043FA3378
+:10B21000CF93FD70FF017F12CD732E2EB4EF1BF084
+:10B22000BC716B825F83F5768D6BBD2708F39E4BF7
+:10B230000AD5E3388D5B6FB268D0BF2B5E7365E0D3
+:10B24000B88D56FF019862850D703A0EAEF0EFEBA7
+:10B25000E1DAD0A5A31FFC37E85788EF975858A824
+:10B26000CF3D9C7FDCD90ACD8F0877EAE05F926101
+:10B2700021788F3FE42478C764FB689C86C2383508
+:10B280006E0CD291A9B61C8027559D8C709E55409E
+:10B290003E81DFCEDCAE68881F66E374715C3F6977
+:10B2A0003FCAD33F89759E7DB06032F2F39924FE88
+:10B2B000FCB4373E8CEB3AEDE36DCDEB0E3F81B243
+:10B2C000610B652E4BE4EB50800F1A055C8D3E8BB5
+:10B2D0001A07F46D7C68F95791CE8DDE9EF5783DA6
+:10B2E00096A8252AF0FEF93D5686F8467CB872F0FD
+:10B2F0007971333E37E3E5037F06C183F81B0F788E
+:10B300007B77777B6208D6C13C2CE49818C543C391
+:10B31000CE1FDEAFCC2479D6B8BC733951986E3FBE
+:10B3200006FE5DE17368E5300E3B3C95F876858757
+:10B33000F3ADA368CB840CDECD1DE10F1FB57B7090
+:10B340007F6F14ED06E45BC0EB0A949799888F71C8
+:10B35000B3FBE17ECD6A23DF6E49DEFC6015AC7382
+:10B360004DA19D59E1F91AAFCD2037951B8C720480
+:10B37000EB36B4C767335A77D738C19F9D9C3F815E
+:10B38000D32707B3A27CD1EBB748BEF0D947C1BFE2
+:10B3900019AF5F343C9C467E057D7326CDB7AF88E0
+:10B3A000F402F00F878B5975F2D0D0E524BE67C048
+:10B3B0001E8827E04F476556945F247E1A766F22D9
+:10B3C0007E6C107CD7D803FC3346C747267CE19AB5
+:10B3D0006D729E29513EA3E731F8EC453F875BCA69
+:10B3E0005F030BD633EB70B99657A27331D0B36FAE
+:10B3F0005D8D16C0513492E31D25C56389DF053D7F
+:10B40000B8EAA11F17D22D51D2476383B89FBBC59D
+:10B4100043CF06E54419E81BABD8671DEA40B81FC7
+:10B42000EE276DB0D27DD42F36E88FD33224F8F3D7
+:10B43000054F4F87769C68BB055DAD56770AE22BBA
+:10B440009119ED9E71CCA44FFC9CAE52CFEEB4B3DB
+:10B4500014DC8FE3C4FEDEBC708A82FD762A0AD932
+:10B46000078E32231F584D7A605AB685D62FF1C009
+:10B4700084BE75B8F87AE3522C24171FA482425573
+:10B48000A2F87088F58FEBF7F5F5C3F37AAFCB1F11
+:10B49000463E621ED20FA53053BF6EDEEAC509AC30
+:10B4A0005F47E7859EF186F62DDEEB0DFDBFE29B43
+:10B4B00062787E6BE64D86E7B7F9730D6D07D3E9C9
+:10B4C00075847388E3DD21F0AC7B2EF5F200D2B1F8
+:10B4D0004AAC638723E40DC23E5CE55D4BFA7953C9
+:10B4E000C95DDE215887D3CBE5CF81F6248C1B378D
+:10B4F0006DB587EC08A19F0BE117E9D08E83A444BA
+:10B50000F9CC61C2B359FECCF6E4DA6CB07B12A080
+:10B51000F165F665B27BDCE362DA3766FB0D7484B5
+:10B5200005F9355ED06BA1D54D7A636B35D8730ABA
+:10B53000DA974BB9BD94F95F88AE41D18F6916B2E5
+:10B540005B9789F54BFBEBAD36C6FA6F007CCCE719
+:10B5500076D6B2C20BD57ABB5C5EBB453FD98E2F87
+:10B56000DCAFAA31F4694736DF371302FCF9321732
+:10B57000B3A11E92CFB764737DBC4CE8ED2520C704
+:10B58000C8B71578D5D9ADBB049FEE8AF02B1BC880
+:10B59000D1CBE9538A0DF110279AFB596857F6046D
+:10B5A000C4B3469DACEE2023F9FE08B03B9BEC18DB
+:10B5B000FA29CD5EDDFB75F447AA13FDE85B38D5AB
+:10B5C0008627BE0DF88BAF4EF05B7C517E27BF0304
+:10B5D000DAC9999CDF6B525D7E7AACA983536747C9
+:10B5E000EDB26A61DF4D60AD2407C3FC1817E7CBED
+:10B5F00091FD18BEFFC8F99C62FF67D68D7EE2BB45
+:10B6000020DFF72DF08B7C777B8D91AF968746E717
+:10B61000B31F640BFBBA8015109F85D6115F3845A8
+:10B620009F1D93815F389E883FE2257E85BD6DB763
+:10B63000B17E1BD0E908D21F8074DB5922AE734063
+:10B640007D85E4622093D9F57C100C58D5B08E8EA0
+:10B6500003452CDE03FA65C0CED27641BF31EAF253
+:10B66000451E58DF40A933B18136D5B0C16E3F02C7
+:10B67000E39E72B311ED7DB33C4C877FA01ED89A38
+:10B68000F6AE17E1D96A67B4DF3376B106E1DA2E98
+:10B69000DBDAEF6A4AB11D27DB1FEE56A1FF93F1FB
+:10B6A000BCFD61F6A5DD5A2AD18BF82A41D0234191
+:10B6B000DAEF337478053AB89273689F7199F06D38
+:10B6C000B6EBA59E30EFC3E6797F27F70341A7913C
+:10B6D000D63D0C5E60CD2F8F2E17EFA35CB8C05FF8
+:10B6E000D6CBC5F071FAC97EAF15EBB6243C9F16D8
+:10B6F0008AE14746F0BFCEFE7BBDBF00783EA4A0E6
+:10B70000DDABC2DBB319571D308E52F8DABFA3FE92
+:10B7100057766BE3108F56E8807ADECE42048F9422
+:10B72000D738E4032BE2BD9F9E83FE1D52A6E02086
+:10B73000751EE45F05FA5F42FC5CE93E59CEF5DA1E
+:10B740000AB1FF55E094305E45172B45FF3C6E4D26
+:10B75000D3816DA8E754275A1470FF4229C207CF3E
+:10B7600055275D2FA84837E06783DE79A9E44FBFEE
+:10B77000790CDEEB1CB0FA9D306E67E0C70CEDEE85
+:10B780008B33981F17DD811D01BEFA9067A1C38717
+:10B7900072D37FBC631A63A7DAD840997D38BC03A3
+:10B7A0002FC7397CB0D8909634F35918A7ABD0E99D
+:10B7B000417BEE9D8D5607D26960738386C83891B0
+:10B7C000A2F52970BFCB1662E8DF3B36B62F44FEE8
+:10B7D0003E61D7FCE3E0DAB559BB1BFD10D5B7B825
+:10B7E0003C1DE03FD0652B0FC7D89FD7E7707FE7A0
+:10B7F000AD97EEA4F51F4971F8E360DC218C6F0072
+:10B80000FD8ED877A6F971DC4DFF2D0DC73FB266CE
+:10B81000ABFF6580EBC826277A52ECC81E570D8E09
+:10B820007B646EB377AD6E7CD7F58E56BC3F30C966
+:10B83000E19842EB792FD18BEBD9983B1E79B3334A
+:10B84000C531B9099FAF6D66B85E8777A71DD7E789
+:10B85000B2B1DDB8BF7CC97BE1CD02F4977C96D94B
+:10B86000B740FFFFEA0FDD9A83FEC986530B512FC5
+:10B8700039CA92B6E0B553C029F72B49DFA19446E7
+:10B8800017EE639DAB9B781CC66B69203AA6588265
+:10B89000B81F7506D6B8A6CFE0F79BC70CC74B27D5
+:10B8A000C65D66219C6BBD6BB3B0DF876D21E83749
+:10B8B00034D759130B8FCD395C8FB9DA9B333600EF
+:10B8C000DC9D7B5C1EC44FA712DADD0078D5D2DD8B
+:10B8D000FE277CC3DFFB81784FF207D089E4707DBF
+:10B8E000CEA43D9A0DED554E47C08BCBAED39B07F2
+:10B8F0006795AECBD1ED93C3E64DE9247DD1A97018
+:10B90000B9FE414ECE1E0DC6C9F587EECB81F98E2C
+:10B910007481ACCDA2754E467B7F24F91912CF3BC2
+:10B9200037C1BA63C8FFD06A2BBB612CBF5E07D793
+:10B93000E99BAD939518F8199ADB948171AA23F0CD
+:10B94000DC02E30CED71F12BDCCF40FE1A813FF3FA
+:10B9500072B8BECF9A19ECC6F5B2197E8AF3BD99BA
+:10B960001DECA1366BF562FB0BC0BF8F7D4EF897C7
+:10B97000B149C0AFCFCCDCA3814BCA3CE30C76EB22
+:10B9800048FB67900DD9703FDE54F2A716F407BA52
+:10B99000B31C3EA72E2E28EDE825995CBF05A79D78
+:10B9A000CD839D9B55CD584BFE0DD8CB141FF4C0B5
+:10B9B0006FACF86010E3813A7DB8C4D496F6E9BF65
+:10B9C000E608FB45D8C9A9BE9DC1F9E87FBC61F571
+:10B9D00087016F69F802B42B172B61B4D73795FC38
+:10B9E00033D9F14CD8714B049CBF6C73B1B2692C44
+:10B9F000E2CFAD10F7135A4E3D8EFE7502C63F31B1
+:10BA00005EDBE2F451FC05890FF35789F549BF8EDF
+:10BA1000EC4858CF8A16110765BBB8BEB106F29143
+:10BA20001F601D06BF24C84C7EC86ABBC19FAB35D2
+:10BA3000D90F66BFA1CA6437EC40DB09ED425B9FBA
+:10BA40000BF9E9FD193947327CF458EB97F63DF4D0
+:10BA50000B150E6E19D2ED3F8342FFFCAC4D3D81BC
+:10BA6000FA684BF03117C6E1BB6D6117EA93EEF24D
+:10BA70007B1391EFBAEBACE5C86F036DE5D4EFAD86
+:10BA8000B6205D6DB95C6F54FAD58F703F91F65951
+:10BA90005579E9890E1D5D2BD5AF9CE8D0C15F516A
+:10BAA0005869684BFEAAB0B2D6BE18FB4B5EAE8C8E
+:10BAB000BBA8CC608F5A9FF28762EC17F21ACF6C4A
+:10BAC000EFEBF1382ED768F73E3063FED8D1EC1992
+:10BAD000B94E891FB97EF97C2478FF2347FA279F46
+:10BAE0000DDECC4F08AF194E09FF48FD2B70139B9C
+:10BAF00084F076ACD066201D4385B980E7AA326514
+:10BB00000BE6657E26E2953F0B24863580E7D54C13
+:10BB10001EFF8C6FE17E657C59E542DC9F3E29BDAE
+:10BB2000EF2854483EAB034A58857FDE2CFCD55F96
+:10BB30006632CA3F80BCBE9908ED5FCCB5F338329F
+:10BB40005317DF363BEAA7C6D7F1FCC40E07F3F75D
+:10BB5000E37B37BAFD9BE1FE32297F35C63C447555
+:10BB6000B5DDB0CF5498F20EF1A67D6679AEB0BBCC
+:10BB70006703DEA744F13E92FF31129F30DB853C24
+:10BB80008C8B99F1738F093F667FA7E279937C5C78
+:10BB9000A1DF73A02BEFD564B433CA14FF34A41F04
+:10BBA0003E82F7E2D583940ED921E548F87B325FD7
+:10BBB000B5636915F97B6FA13D3096F24D93315E07
+:10BBC0002DC7977E5EAE5FFD466EFEC8700C8AF78D
+:10BBD000B656C6B61306D14E98C5AFD7C175FAD2C0
+:10BBE0000569B1EC84C1226127C073B40F06F794D4
+:10BBF000F36B91D14E60E5B997C1CB265A6FDCB497
+:10BC0000BCB1B1E46E7056E8E1DC09D17642662B36
+:10BC10002BD3E1FDABD9EA3FE27A2B451C42CE079C
+:10BC2000FAFDB0DE0E33CF7728C7C3F15C3E9EF439
+:10BC300085BC5E8E7E364F2B433E7BC0AED6A0BD0C
+:10BC4000678E27FD3097DB895D196A0B3E67EE9C96
+:10BC5000CB8CBB49C6AB33B327F2F403C57D4CFE96
+:10BC6000A0F49FF6E3C3FCA85F68F370BF303EF515
+:10BC7000C2610F3C5A971B7A1EF135F74258B380C8
+:10BC8000DC39172B643F395319D93D57EC875D6177
+:10BC9000BF2E146AE0E7AD8D3C1E5F9A6DA3767CE3
+:10BCA000C87A80F605531C275E7D8FFCB02560079F
+:10BCB00088B80DD953C7853D1564ADE4EFB9ED6182
+:10BCC00017C62BCC719B9A544BFF74D0EB3585175C
+:10BCD000AA7D33E97D43DCA7C69771788278EE812F
+:10BCE000EB92208F032DC338108E5F1DEECAC03C2F
+:10BCF0009CDFE65719F7F3D0BE58DE747FD6C3BE7B
+:10BD0000AB170792F125692F4A7B06F44BD778A42D
+:10BD1000CB02C547BEBF294E648E0BC9B88C397E95
+:10BD2000648E177D9C9B4EF490F6978CFF7C946BF1
+:10BD3000B4C3AC3037F6EB2E822D15E4BBDBCED28C
+:10BD400076CEE0F11DB4978E94FEC483F68535CF90
+:10BD500014E7BCC2FDAD13F6A133B8AFBE126747FE
+:10BD60007B3BE80D513C7189629493C9797C9FF3C8
+:10BD7000E4B9F93C228FDCD9B641BEAFA1BE09A619
+:10BD80003AC2714A741C56987F45F2949CAD4ECAD3
+:10BD9000CB277F2415AFCC0FFE4816FA231ECEDF2B
+:10BDA0008513683D4C9DC0CEE8F3C602EE081C2EFC
+:10BDB000F05BB23EF9FC2988E7FCE83C97C3DB8ED8
+:10BDC00092629703E31140632BE72B4F247E9F8100
+:10BDD000719D753EBD5D518F798B5CB43B795E433F
+:10BDE000DED7C5CF6DC8BFF1A9213518635F5D955A
+:10BDF0006731E44F23F1F74C46F922398E8D7937BC
+:10BE0000911CA0AC4A78AC31E2F402DED5420E00BF
+:10BE1000E12E27B04CD34E2BE375095C4E643EC235
+:10BE200056142C4F87F5366D53286FCCB49AC368DF
+:10BE3000DFAF11CF1D22FE66CE23AD117918665DEE
+:10BE40004776DAEA878CF9B5C61E63DB6C97CB7848
+:10BE5000BF0D8044B8DB249D40C15B47C7C37E5AF9
+:10BE6000E75F291E241F2ECEFDAA17EB5A3AE342A4
+:10BE7000BB1B30AFDDEBA27808F990282FFDF00B4B
+:10BE8000EBD9B6B7F0315CCFF63C2B977B85D7B9B1
+:10BE90001C4E79D835A4E3B7ED82CF66E5F978DC9E
+:10BEA00005F72550892C3599E448D6B51C49E1762B
+:10BEB000A523C0EDC6A7A6BEBC94E75D797D4B6601
+:10BEC000205ADF520AF8C912F8C99CB6DADF0FD738
+:10BED000AC00AF4B9AF1ACD15FBD35D36857669AD1
+:10BEE000FD5553FB405EECBA96689E4DC4DD05FCE3
+:10BEF00066B9FA5E1BCFB7FC33F8AD787DAACD43A7
+:10BF0000D7EFB779E9DAD7E6233BED99B64CBA4AD1
+:10BF1000BC3F600FD6635E4BC621657CBC3F8FFB88
+:10BF20006F2CC0E1A8106B59684D4D443C1F0D703B
+:10BF3000BB70A4FDA5AADC1807BD3D68CCEF2DAFF2
+:10BF400031E6F7EE9BA9BE9407F024CCF4DA43BAAD
+:10BF50007CD41AB1FE1D0FF37C931CFFE83739DD4A
+:10BF600065FB9C58FFCF045F24BC9C62F701B12A9B
+:10BF70001FAABC19E3F6CC937345F6E02F855C2627
+:10BF80006CF6D8312E54D9BFC281E3ACD90DE3B8D9
+:10BF9000AF7C9CAD6913D38CF985AFDD81701C8DAE
+:10BFA000E4175AEFC0FCC251915FF843DEBDDF4198
+:10BFB0003F6B569E7A1AF5862B4F3D83F8F883D057
+:10BFC0009BD03EA76FC3CFEB4913478DE3FF212FD3
+:10BFD0007F781CDFBA40698D55D7F2A19017D05BEE
+:10BFE00017711EE68AC4D13EE06DAE8FE2F2397E53
+:10BFF000DA7FC95A709CF61FB3966762D8F32C5F3C
+:10C000009171B98F490F7AA51E0C5E8A359ED5595C
+:10C010003919F17DCECEEB62CCE3C5E53B247CCE75
+:10C020007C7C3F35025F5C7E7E74BC1D808301A4F6
+:10C0300093CD9348794D7637E53F251F25D47B6E08
+:10C04000C3BA05702C19EE2F09CF796ECBC338CE49
+:10C05000CFA7F89F6023D3F5B782BFCE0BF93A87FD
+:10C06000F205727446C8D729942FB89E14F2F5EBE6
+:10C07000363FB57FD95648EDE36D2AB57FDE564E83
+:10C08000D7C1B620DDFF595B0DB53BDB42743D5A8D
+:10C09000F6D8CDB8EF7CF03D85F4F148F0DCF5B88A
+:10C0A000D5203F2D7B130CF2B6F6A1F186F6EA1EE1
+:10C0B00063FEBCB1638AA1BD6A83317FBEB2D598ED
+:10C0C0003FAF6D9963986F456881499E6F35C97B15
+:10C0D00095A1BD309FDB8955E5B586F79CDE4643CB
+:10C0E000BF84A52C148BFEB7E5F3B8C9CB25C56377
+:10C0F000874689733836DCFA36DA2791B62DC4D0F4
+:10C100009E776C5842F71F88E3FB9DF9BD26C1AFAF
+:10C110009D65AB83F319DA458BAC7ABBE79E59A1D9
+:10C12000E5F93A7FD0E1E5FED8C5A9D5562FF0D183
+:10C13000D2B2F75EBD0EF82834C0C8EF51C1DCF3AF
+:10C14000821D5CD8BA6BC175D0AED6D61BFCC7E2D7
+:10C150009683AF80F8B240D9D1F664783F3F3BD4A4
+:10C1600084E397782FBC82EFCF5F9C6D43367F20AE
+:10C1700089913D7A2ECD113E10831FEE1770CBFCB6
+:10C18000D527DDA7CD79FA8C4C568A71E48CCC0B7F
+:10C19000A5A8D7A0AD62FEEBE0ACD0FD081FDC5730
+:10C1A000514F3E90B53603F79391F2468FE41BE36F
+:10C1B0000912AE1D251C9EA322BF3064CA2FE8E2DF
+:10C1C00009EDF9A3C413CE89F786BE1D3B9E704EC0
+:10C1D000E41DCEC9BCC3C35531F30EE7168A7802FD
+:10C1E0003CC738C2B93D35FCBA70F4BC835C1FEC67
+:10C1F000477BF20D790761E78BB8F9E02C752F3E8C
+:10C20000FF6AB6DA8BD73F66A9FB108F4775F94FE7
+:10C21000CF445DFEB3EC2786FCE7A19CD093F93CAC
+:10C220006FCDD0AF6AD7D850DC14CCC706EF89C524
+:10C23000C7CFE4CBF862FF67CACFEAF2A8964B37C4
+:10C24000B12BCE035C71BF425E9762B66F121023B2
+:10C25000E3A276DFD379A19F20DE3A929EF3F1FA32
+:10C260002B4B74FF40E537823D649E4F8E87FA0A60
+:10C27000F5D620480CEE33DB932ED4A19F724CD020
+:10C28000D37C3D9E2FE8C93CC948DFA7F382BF207D
+:10C29000FDF36C9F8FEADAC4FD2B85E34947F06D0F
+:10C2A000B4633B1BADBE03DC6EA7B8C50D81A470A3
+:10C2B000B72E1F7C11F7CB7C8C3F0E4D7500BDDB7C
+:10C2C00043AFB8B11EFC9DBD36AC8861DF4DD4ECE8
+:10C2D00048FF9A4CBEBFCDF786BE34348A9C033FDC
+:10C2E0008CB778090E8BA590CFCAAF9A825773FF8F
+:10C2F00081BDEF4FF0C178DFEDE5F9AF1B7A57BB99
+:10C300001A75E3DF305BEC97C83379989F54C258B5
+:10C31000A85E1378EFCD02CCAFF82C14E77867E372
+:10C3200007C79663DC51B552DCF19D8D17A97DDC02
+:10C3300067C945F2BDE3FD7FC7B0FF0DDF5C3391F8
+:10C34000FB2D1C1FAB36E63ED99D4E7931C76C984C
+:10C35000E7B87A3171CA8C68FE6C95C282B1EC98EC
+:10C36000C9B339FF2F525BEF40B816859C0CEB9C8C
+:10C370008F376C7D1BDBDF2D557C56F4EB33F93C9E
+:10C38000357B6D544F0BF85987ED37FC090CE79D51
+:10C390001F3A68C3FE1F6629EC3AE52AE255BD380C
+:10C3A00001E5F01DE4BF18F05F94F22BE468BA0DCC
+:10C3B000E43E07F17FD8AD8F534A7ED2F2D4CCD978
+:10C3C00014F70BB504C9CE5D7A19FB7433AFD3FEF5
+:10C3D000DE051BE61EE21F6F9D84F1A561708E00D5
+:10C3E0005F91A0FB1FF3791CF3865EDB9B5F417EB0
+:10C3F000DE68A73A845979C139B3F5FED655DE37E0
+:10C4000064FDDA40213F8F00E634CD03F066DA00A8
+:10C410008E3825DEAF71B9A2F89C4BEC7FD04F1D52
+:10C420000BFD56B1BE7E8CF3319BBAD38AF1C32289
+:10C430003BF9C7CB57DA13912ED17C99DFE06F9887
+:10C44000AF67303F46751A2EBA0E809F8DF912FCE9
+:10C45000014B1C1EDA84DDEF7F449D0A722FEA4AED
+:10C46000EF3F74EB2358577ACCC2DB771DBAF5FA4D
+:10C47000CDB0A433935B8FDD0EEBEADEA5F837F980
+:10C48000F0BA7F77239EAFD8A0F8CBA16B7DFF8D4C
+:10C49000F598626CEE72928D7F7ADBFD3723BF5E7A
+:10C4A000F4320FF2F3F214CECF4D832C6C81F62DC3
+:10C4B0003DBB28EF191CB451DD9ACCCB9E4CE179E1
+:10C4C000D97F68EB27B8D1AF5D389BBBD8F833CEA6
+:10C4D0000F70601CB5CC46F9D2F1CCD389FB4BBCB4
+:10C4E0009A5ECAED698F83F23C8B19FB0EC67936D2
+:10C4F00070BFB948D445CA3C163BCBFDDB16F845A6
+:10C500007D32BEDCE81FE79BFC5FA9DFCCF916E0BB
+:10C510007F0DEF77CE4E34C4EB468ADBCBEBB360B6
+:10C5200047E0FA9E1379DC4360AF633EF3C760AF28
+:10C53000E3F579B0D7F1FE8B60AFE3B51FEC75BCC6
+:10C54000BE0CF63A5E0F83BD8ED7D7C05EC7EBEB4D
+:10C5500060AFE37BFF0BEC75BCBE01F63ADE7F7685
+:10C560002EDFFF3AA739C29B01DE4E3BFB35F29529
+:10C57000562AF2C2224FB62D693AEDEFAE8F80CB2C
+:10C58000C19E1A504277213DB43417F51B48BCF0C8
+:10C590001FFF17DBDBD2C90F6136DFA12178AFE3C4
+:10C5A0001BE9FE6E68763918E9FB53479947017B12
+:10C5B000E6FCEDCA4C8CA39EB94DE9C3F6C06D0AEA
+:10C5C000D913D351F472A2FB68F1FBBE03B89FB537
+:10C5D0002732C18F4FF6AAC07FE71136E4572DA945
+:10C5E0001EFDD2794ED91E538FCF1B3728C24F1D47
+:10C5F000B74F85356C53E4FBA9BDD8BF43BE2FDAD6
+:10C600008316F9FEBABDE8271F8BCCB7BA564D8505
+:10C6100076867CBEB60EC73F15A9AB9BB712DF1F4F
+:10C62000888C3FBB17DF3F9326C7BFB396DA76D916
+:10C63000FEA795D49EC0FBCF7AE1BA47B16EE56AFA
+:10C640008FD71EE2FB1FEC63AA3E9FB3A9D84AFB1B
+:10C650009EAE1E9CE26E32CF6F49704FBB9278A99E
+:10C660002ECF4FF15298CF8E72F6F5D2A4C9A8778B
+:10C670004FA5F963FA29E5C591FA5663FC5455783C
+:10C68000BDBD8785B03E3E5EDC8FEFE175F48E4C1C
+:10C69000DBB03AFA2B8927CABA07194FAC593D7A51
+:10C6A0003CB1A6D4184F5C259E8F144F5C658A2739
+:10C6B000AED868CA43843E593CB18EF5DBD10F63D6
+:10C6C000AA427254E7E97B7522FAFB677D144F6436
+:10C6D000BED729DE2ACF4FE0FF2DB3F1BC196F9FE3
+:10C6E000BF5BF1A25FD17DB73211AF27EF5626A114
+:10C6F0007C9DBD5BF1A0BC7D589041F8CFFF8DFFC4
+:10C70000751FEEB75E8B9FA323F802A62A82AB9318
+:10C710007CDD30CEA9BB9571F8FECAFBD21DC80FD7
+:10C7200060770A7EB4EE45FEB426288676DE64C9BC
+:10C730008FE147503EE68D176D6DF95E949F5287ED
+:10C740007C7F33B5578414D1FFEB7B51BF1C9B2FEB
+:10C75000FB4FACC3E7B74F91E31D20799C9720DBDB
+:10C76000BB49FEBA22E37DFF11ECFF0BD490D4DE6F
+:10C77000B917E5BDB452E8336D268DDF5927C7FFE1
+:10C780005A2FC6AD6A2DF2FDC524FF4D4CB6C17EB1
+:10C7900087F6AFC4FE70D70F3FAEC5B8D61DF2B94D
+:10C7A000F6F123084F9D68AF2BF897BDF8FCAF7EDC
+:10C7B0007D7FE6F9CCED956C60E1757951B930EF8C
+:10C7C0002B0D45DCDF296C3988EA8BD5B5EEB7A295
+:10C7D0003C46F36A29D541E46F9795EAE7825E7695
+:10C7E00073AC7AFE4B057C9C8D05579A5F8B3DCED2
+:10C7F000DA22BECF75CD6731FDDC83B3E66F2DC87D
+:10C800008FDA0D68223AE05A02570B5C3FCE0A3DA0
+:10C8100088CF91D618879171ED25A29E7853C9775C
+:10C8200082F3F1FC5291DD2FC2E103FA7CAF4D9C03
+:10C8300073AD9DCFEBBC42DD4EF2D7AABB441D8940
+:10C84000D54DF908DBF58EFD943713F9D410D61DBC
+:10C8500067505DD7A8E73B6CA63C6A97586F69F6AE
+:10C86000FB94A76E7A83D70BCB3C76BD80AB09F5E2
+:10C8700032C0DDB85A095BE0BD46543C98D7CD6460
+:10C88000615F7A34AFBCA2CCD6EFC07361E27C06A4
+:10C8900013F670241F5EEDEBC3FA189B1AE757716D
+:10C8A0001ED61FA4BA38CC17A5B348FE59EA91CAC0
+:10C8B000E6EBEEC63CB54E6F519E3A9E0DD31BA4DF
+:10C8C0001722754D228F1EA9CF117A40E6A71BC4EF
+:10C8D000BA9645F4C0E22568E7C63F20F2D422FFAD
+:10C8E0002CF3D495A6736D8D810563289EEBB7F963
+:10C8F000A9AC26D5789E29DE44879B8AF9B94A9946
+:10C90000A73E5A60CC373F6067A477BB328C7CB7B8
+:10C91000A098E743FCC5320E19DF1F87F6377391E5
+:10C920001FD28DF19CB1DC1FA1C35CA6B88E6D43F4
+:10C930002DC51FF1B9027CA864BEF6EFA897B15DC2
+:10C940000CFD6D78BE05E9E1B6903F2AE33F68A68D
+:10C950002CCCA138D079E467DB867A1A479E677FB2
+:10C96000323EB67C5C2C9079D63E3BF6ABF5BE767B
+:10C970001CE7FBCC7120E18745EC181FAF7F995471
+:10C98000E09376899D9FF763F6A559142FF9B800B7
+:10C99000EFCFE8F3211C725FBAA3E839DAC7AE3CE7
+:10C9A0000FCEDF5BFBA3976AB5E491F3183705223E
+:10C9B000790737A6C059B2CC3BA889D88EEA595816
+:10C9C00048A141CFD6B5FC27D0B351BB3FA30E9FA2
+:10C9D0007FD1E0077EBAA590EAA778FCED8B06FF31
+:10C9E0001BF96A3DF2E1B59EE7C5FCE03A9C67ABF6
+:10C9F000A2D6B8E95C0CF32BA3E70BEFC5FEE67CEF
+:10CA0000E1E5E2187F8B5B8C1EB7E82D34E6F53F3D
+:10CA10002F718B7F04DCE13E09F27490E429C0E5BC
+:10CA2000E9AF7DFF83F51EC1F56E55FAC2F1D6ABB5
+:10CA30001F37783A2FF46B94A3E9A9AE06B4676068
+:10CA40001E1FCA5F341E0270171AE2217B5BAE41C3
+:10CA50003C04D6F97BD27F659CAE7F05747314E1EC
+:10CA60007A546E47FC15F26506ADAF8FAFEF2F30ED
+:10CA70007F4E11EE034F717E89E287DB493AFCD489
+:10CA8000B5FC65F07333C17788C3F705A0671DD186
+:10CA9000D3CFE1BD9CFFBDBE80FB17F05E13BD97F9
+:10CAA000C7F9E05E6157835FBEE03A5FD42F4FCE97
+:10CAB000569B8BB89D7B6791A1CE54BDAB6874BF6C
+:10CAC000F99EA2D1FDE6FBF0FD2F8ADFBCBF80DB23
+:10CAD000FBD1BC4DD8C53FBED142F9E57AD1B77B79
+:10CAE00043D5A21BB1AE06F08F6D27AEC7AA5B4F30
+:10CAF0009A8DFBDBA6F36AF27B07725D366BDDD89D
+:10CB00007E5F149F6F8D6975E079A86635A913CF94
+:10CB1000DD2EE8788FEA061DAAD3877EE197BCBE9A
+:10CB20004ECCCB56A97CFD8E160F9DEF93E7DDE42E
+:10CB30003994E6FE1B5F73E0B939F05F5260FC8AFE
+:10CB400032FB69FDBA9DA6732936537BC3AFD3B7B9
+:10CB50001FD6F57FAAC8544F687DAA9CBED3D1A129
+:10CB600078449D2FD565348B313695DCB108E39739
+:10CB700060C7F9100F0B76EE1AC07C9AA3C34AB9AE
+:10CB8000F33FB6F9B61F06918AEBB552BCE1830DAF
+:10CB90000AFFDEC7629EC76F12797C668A33C87847
+:10CBA000B8C463DC83BCFEC35178AA8CCE37D6AD43
+:10CBB00019C8E7BC43F1061B878CC9EF6F540ABE46
+:10CBC000AA0FBCD781EF2DF35A0CF543E678848D7C
+:10CBD00099EBE4791DA74DE5759CB64C5E271FCFF8
+:10CBE00054FA5E47FC962AA267A5CAEB38C14812E0
+:10CBF000DFDDE274A908ACA73A1F731CC159688C29
+:10CC00004398F9D24C8F93267A3C61E3E7933A0735
+:10CC1000AD7E0D6E773EB4BA0BE3E7DA43168A6356
+:10CC20009C95F5210024C6F397B3087EC95EEE6C8F
+:10CC3000E5F502922ECB77F2BA11EA6588DBA732CE
+:10CC4000FD773C968BB8C21DAC8FCE3BAC6443766F
+:10CC5000948355184AB7623CC647D726A66D6184AF
+:10CC6000BF50573ACCF744EB783FC6B5FB27D99372
+:10CC7000DECDE47E442CFB359AAFB5B1777571FEFD
+:10CC8000BFC5B53E695CCBAAD1F952AF233C4DB9C3
+:10CC90007C5CEB88C84BC8B8D6D99DE27B1BE2BC54
+:10CCA000C580BD75F24E37F6F3919E19B377F92220
+:10CCB000E48323BD3FF188F3AF1B278EFE5D88829E
+:10CCC000E218F5A43F2F60345E67FA109DA33E6919
+:10CCD00037D6E5CAEBED0159BF19528B75F631F322
+:10CCE00044EA38E717D346C0CF6BCB38D3BADCD091
+:10CCF0002D787FEE05C10F8B95B002EBAD702BAF99
+:10CD00002ABEE8FCCC5C47FFB77C18C11D87F80140
+:10CD10003C0EC4F1BADA817456F34C0CFADC389745
+:10CD2000EBD181ECD8F493CFC13EB9BF7802F79F25
+:10CD3000C6F0B8C2EF1DA3C715BE551C23AE20E92F
+:10CD40007B709EAA71BAF3B62727D489FDDB4341D5
+:10CD5000AAD739DF63F56D42FCF7B7BE5508ED255C
+:10CD6000DFB27A301F7EADF37C930AD289AF2E9763
+:10CD7000E7FB50E0F764A4AEFB5B944FEF8EF867DF
+:10CD8000DC7EAC1DA76BC3965C3CC8FBBF585CBC8B
+:10CD90000FCFD98F646FDE1758D58BFE9CB437A1A7
+:10CDA000BD12DBF27D9084C9A5A0349B5A643EB1CC
+:10CDB00082F2F5D1F956EC43FBF8ACDD38BEB4573E
+:10CDC000078ACBF7A1BD1A8CCC5FBE0FEDD953A655
+:10CDD000FEF47D4A18EFD7C565D4BF91C9F1CBEAFF
+:10CDE000B17F24AEC8D6933F7ACC21DBF7D4A33DE4
+:10CDF000BE3D9D8F371858DFAB7D0EE1B9D6E37F7E
+:10CE0000D2FE23D9FD27EDBC7E50033BED89742C67
+:10CE1000A3ECB372E1531D78C6AE5855683FFA9340
+:10CE2000888307DD16E1E76CEC45BFA7B644F2E95D
+:10CE3000E354073212DFAD7FFE478F68FA756A3F11
+:10CE4000AA35C0ADB5529D8884FB04F68775D4DE43
+:10CE500073A717E1AC95F10DD6D98BEBEB4C92EFA4
+:10CE6000DDB40FDB23CDBBE6F99DBD88EFDAC83C0E
+:10CE7000DFA6F76BE3E578BDD48EE2F300C54BA2E5
+:10CE800070B518E07A2D70A017E10A7AC25B707F46
+:10CE9000087A19EDC777B46CA2FAEE881C693BD208
+:10CEA0004A510EBD9136C757448EEE2739BADA7013
+:10CEB000C17E9A3E07F7BF4CEE275EFD75C33E89E3
+:10CEC000EBEEE17A48F2519D478E03F8077DD2E4FC
+:10CED00093EDAFD5B7B8AFC6BCDCDF0DFE9E917D3C
+:10CEE0002BE58969AB4DF27365E3B5BBBF4675149D
+:10CEF000CDA0D763D563DF5B10D14FB7123E0BA532
+:10CF0000FFCCA4DD5181F72376872F627754CE8939
+:10CF1000617774629DD52CAAE722BDA9C213AFAE7A
+:10CF20000E68C65C9E076C177592799BD95ABDBF77
+:10CF3000FDFD79DC9F7F6A1E874B7EDFF6CC3A854C
+:10CF4000EAC4DA7BA68CC1F36EA7537DDB51AF0D2B
+:10CF5000A45BE83B0527C5F73507BEE14CBB0FEEE8
+:10CF60001F4F73F9515F1D4FDA49DF513BEDB70A8F
+:10CF7000FE3CF40EEEF3BAB8A2867A45C60DEF9EDB
+:10CF8000B3F55194A3133EDE2E9CF7E377509E59E0
+:10CF9000A6F97C6780EC18C7CDB08DE0BBE2FB9CA6
+:10CFA000C5E279E5B61F7CBB0AC710F68BD49FE6B5
+:10CFB000F39EF863D7DB5F5D566E7F79793F2F1B59
+:10CFC000DA74C982E3F2B66B84EFC2D6C8F3CB261B
+:10CFD0007BAAD2743E9989EFA04A7BBC38B9D18F25
+:10CFE0007E5CF13AA37D74BAEB959E42F46BFD56DC
+:10CFF0000F6E93B7661A9F4B3B6C51D763E48F82D9
+:10D000005D689847D6DFDECAFA3AE85CB8EFF5C348
+:10D01000D68951BFA5DD5349764A7326B4603DC712
+:10D02000FEBE34311FED831E2B7E1196D7DEEBD66C
+:10D0300001FDEC9664DAA7FD8AA2AF0BDAF228CAEA
+:10D0400045B42E88B7A3F1F8BF7FD45047C7BEB60A
+:10D05000CA10E7D46A1FA53A3E1917D3AAE9F919ED
+:10D060009B8883694D8FE27E16899369BFEA35C438
+:10D07000C9B4203D0F46F6BF5DFBB0BDCC23E0D167
+:10D080004EF622BFB5AB5C9FBC34C77D52B37DF278
+:10D09000FE209FFF730EC6B7827CBF333F2F1E0C4E
+:10D0A000B78F11761DD68B9BE57C5C80D7DF95A969
+:10D0B000D91D137C3C7EE504FAA82BAD2B316E10F4
+:10D0C000AD5729A2EFA4358D505FB224C0E5F7E833
+:10D0D0001CB7C12F37D7A934893A9591C6B9B38403
+:10D0E000E7D907144F35D7CB56867AB974D714379A
+:10D0F000E6A664BF9B4BF83EF071967A12D76F8E0E
+:10D10000A79DC5781AC9198F7B2C15BC63DBC9BFD5
+:10D11000572FBF677226C9EDDF0CF797F688784561
+:10D12000F9678B9FBD37C7784E7FA4FA87D212BEAE
+:10D130009F1589F57ED6FA8727E35515F135047DCD
+:10D14000313E38AC1E42D439C83A88B1810C5EB742
+:10D15000C1783D44BBD64AF8BBEAE75CC4FE0F7C0D
+:10D160009A1C403EADE17A44F2D94FE7F838FFFD12
+:10D17000C64FFC27F90EFA4F0AA01EA9E6FD8B7FC9
+:10D18000C3BF7B21ED8B718133BD9BA6921EF2053F
+:10D19000F4FEAF3B722E322310430F1D5DA04E0DE7
+:10D1A000E8FC23783F33901FF3FD2F13BCA6F7B3A1
+:10D1B0006606B3E8FDC8794E7566E06F7510A03D50
+:10D1C000CC75277CBF30D79D487BF0CE92DFAFC4B3
+:10D1D000BA934BF3D5651CCF1CBF11BB7288DB39EA
+:10D1E000517B3287F6C36B602F36133D453DCD35FD
+:10D1F00018FF5EFDF8D27E82FB7FA7BFFF79F3DFC9
+:10D2000000BE6E824FE44D3EC5FBFF40EF8B7CCDF0
+:10D210009F01DE30F191B0FB3F87F87CF6730EDFA3
+:10D22000EB44AFC59CDE657398DCB7FF35361F5CF9
+:10D2300031FFFF6F7A5FE4CD75E3FE5C3FDF48FEB0
+:10D2400039F4FB15E16DF130F93919D0E5E347798F
+:10D25000FF8C7E7EDDFBEFEAF9F32AC8F9053D7D00
+:10D26000AFC13EF2118D3F958FFFBBE2C83A2EE968
+:10D27000EFFF2D4E76593E9F3617F1D5CAF9E90AD0
+:10D28000ECEB9BE6F2FA96108FCF6A927F678AFBEF
+:10D2900043789E74F91C26BE8F12CCC6FB2AE3FE8F
+:10D2A0006DC41FD17AF719FD1118688641CFEFD3ED
+:10D2B000FB1BE5739FD88774B72EE0FDE7BE306E89
+:10D2C00015E2DFDC067B64DE5C635DA68AEDCB8D58
+:10D2D0008BF97F7ACF94FFD73D5F44CFA3F50B64E2
+:10D2E000BF82DDE672028D7F51674D6E8476B5F0A8
+:10D2F000DBC1FE8879AEBB3A1AE7AE9EABABC7186E
+:10D300000C5AE97C60C44E61EE4711FF113B4AFBA9
+:10D31000FE3EE3B98D8314E72A11F46D7EE1D97ADC
+:10D3200001E72AC4374B16EBB87CFF35D4DFCBFBC3
+:10D33000C7787E273D4FE57032F7EB67ADBA7C18B2
+:10D340004A9A05F3BCF82F1FC06FBF7D6E32D82BF1
+:10D350002F77293E2BB41BF74A7E7A81E44157F799
+:10D3600041F2B742F0FBD6170ED7233FAF785FC22A
+:10D37000EBE4EB8FD4311DA6F59F10F188092F4205
+:10D380007FCEBFDF24F87C1CBE6B30FE36A213E3D9
+:10D39000F8A9619A7DE2287516BB04FDE1BD9D04E4
+:10D3A000978BC3551352C85E0FAE06890638EA073D
+:10D3B00059CC38D3EEB90EB98FEDA679DDC28FF511
+:10D3C000C73E2FBB2FCA4FFBA8BF87CFE702FD8FF9
+:10D3D000ED40E8E802FC0E448DF8DE784D998DBEF4
+:10D3E000B750537861A98883507E53E6C14B1F9C88
+:10D3F0004AF9CDF8B238EE2FBA8C7FC722D8E4A410
+:10D40000EFC9C9EFD6CABA8C4A66FCBE5C8CFC96E2
+:10D4100021DE22E32291EFC95953C9BF753C2AFE90
+:10D42000FE93E9FB71F11B18C5B79C1DFC1CB839B4
+:10D430004FD5B0B1F5AD22ACFBB0D9292F6BCE677B
+:10D440009AFF1EC63C1753C7E4503DCA6B73F3A343
+:10D450007528E7F74E71A31C9AFDE7F323F9CF7BFC
+:10D460008DFEF380F49FD5ABE33F9F986BF49F1F35
+:10D47000CF0DFE8AF8CAA6D2FEF67249F1528C236D
+:10D480005C147514A71E4A5E82F128AD879F573839
+:10D490002DF2FC32DF7FAA88B93D78DDE2247C9E44
+:10D4A0005A9314C62D784C47F362FCAEA0F4A31136
+:10D4B000F318FFAA10EB34FBDBF18540CF5924664B
+:10D4C000E4679FF278282F50D125BE2F21EA05A4CA
+:10D4D0009F5D21CEF13795F173D518B1437E90DF72
+:10D4E0000FAC107EB8F4C7FB7FCA147D1DC052E696
+:10D4F00027FEAD06C6C0EB32F13DC51A0FDB8240F8
+:10D50000FD312BC44A102F7B399FB0ED36FA3B57C3
+:10D51000A77A76D1BE3AD2390677893CC7A0517E28
+:10D52000F61AF8F9490497D83FAE60BFB98EFADB16
+:10D53000B81C6FC3F3BFF9D1EF4AC873F3DB93781C
+:10D540001C654609DF6FCC57F9DD884FAA3F407F45
+:10D55000DE5082EF47FDF94C84E70AF4E74C825B2A
+:10D560007CB76232E681F8FAB34B783ED73786272C
+:10D5700071BB1CA3D70114968C92CF6597AF235033
+:10D5800063BDFFA1B0B3D7E5861696F07C3FF1AD41
+:10D5900039DF2FFB1DC3F8548CFD76838853950229
+:10D5A0008B5A72869FE7FF459B7A126DBC636DE5CF
+:10D5B000743D6ED312B17EEB2D719E1F0C2DAA67A8
+:10D5C00092755172DC9ABAD2936775FB59C5C2C77E
+:10D5D000A9CEAC3DF3C0EB0AC0795AD47B0D24FA36
+:10D5E000689FD38EF2EF4B2DABFECAC9B3BAFDC311
+:10D5F0000C2FD6456920EAEB4BF877CB5E2975F600
+:10D60000CFCBC3EF3571395CDD738ACEC3D46F687D
+:10D6100060A12CAA9BB2217DDF9EC3BFBF50516881
+:10D62000659A0EAEE46CF5AE121EF759477C12AD4A
+:10D630000BBC1BDBA576750CFEFD49199F94F98286
+:10D640009B5FFC3F94771B4862347FD0CBC29877B6
+:10D650005FA0AE770C61DEC5EBA3F8C8DA121FCD70
+:10D66000DBD8B59FE0890FBC47F0806DDD8FF58377
+:10D67000667C4BB9E814F8D6AD9BF03D92FC562C75
+:10D68000B425227EDF427A41BF07C53E70C476C111
+:10D69000ED8941F7C87B85A5067C3BBDE506BAB59B
+:10D6A000ABF78EC1F5483A378A67E7BBAC6F221DEE
+:10D6B000DF073A32A263EC3A88A348AF1B806F4C75
+:10D6C000F4AAEFE0DFBDAEEF28A5EFC5D5177EC504
+:10D6D00091427900A50FCF4B36953530B4A71D6A1E
+:10D6E000127DDF4ED26F6919D04F072FC8E3632434
+:10D6F000A7C2EEFC14F1F5FF5EA2B383AF75FC1F69
+:10D70000E6FB51490CBBFCCF957F18FE3D1FBEEFD9
+:10D710009E12FC62BECA7D77C4FA662DB8AAE55394
+:10D72000C021E506E5769382F5938A1DF92C88F2EF
+:10D730008BE7D70A7FBB05F3A1CD5ED6877BE13EA1
+:10D740009423C09BA33CDD81F2D3B8379DF802FD42
+:10D750007FC2A7D8A7DFC47D5AF8FF74BF85F3C581
+:10D760005F3AEF03F0FC1BC15327CE177CCEF25279
+:10D77000C9E541F73CC05B50DD4FFAE5A742DEE06A
+:10D78000278D7FB7E993E5418B555E3726F3A131AD
+:10D79000F29F3EE553E43FCD79D591F2A131F29F5E
+:10D7A000067B7DA4FC2733E549CDF9CF455D5328A1
+:10D7B000FFBC28D342DFA99676BFCC7BBED1F50350
+:10D7C0001B7D176986C292D287E747BF2DF431438C
+:10D7D000AB4EB7FEE369FCFBD7DD292EFABBABF8F5
+:10D7E00083F558129FA01F5C4E98B76321AFCBAC56
+:10D7F0004C7FC68C5787F04BAE08AF32BFEEE85275
+:10D80000C29B9135BC2C52FFE7D0D1D991F91CD1E4
+:10D8100091D9FADDF83DEE46FF78AA2733D3A1B8B7
+:10D820008BFF5DCA62CF6CFABB9492FEC5DEE175D8
+:10D830008336095F8CBAC13F3B3D7D9B5D19A3D008
+:10D8400053E6B147A2E3ACBCE0BDF32644BFDF24FE
+:10D85000EF1F4FE3F83D7323137FFFD4484FC0BF42
+:10D860004AE7FA33D9FECDCA707E2816F598C599D5
+:10D87000DA7AAA838F5FECC5BC5904BFA98708BFB9
+:10D88000EDADBEEDE81F1D2DB353BD4A0C7EA0BF0C
+:10D890006F7B397E1846F79E4F47BFDAA22716A442
+:10D8A000C7E08F4F4DD7CBD0D3617DAAABD0174BFC
+:10D8B0004E5FE92139F55B3D4857494F49DFE1F4B7
+:10D8C000E4FB9DA4F7DBF9EABFE07E18A5B3FA34C8
+:10D8D000D2392ABF9AA19EC5FCDD9B1F8A3A161831
+:10D8E000E7391CE710FA58143F540FE138555F8AA6
+:10D8F000FDF74E9E29E5FE4E1DEB7B7522FA7D67F6
+:10D9000099A8D7F4BFEEC338CD862931EB358F3DCA
+:10D91000A0F0BFD3E365FB2D627FB5E8FCDD535873
+:10D92000B709FEED09ACDB84EB5BF3D2F9F7E5B1A7
+:10D930007E732CD8E3A2BEB30EC7C679C09EC5BC09
+:10D940003CB385189E4B1FC0EFB3CCC2EFB36C2223
+:10D95000BD1BADC3F890F45534EEC9DB9501D97603
+:10D9600087A9EE46E63F993764CC7FCE0C1BF41DA9
+:10D970002B0C19F39FBC4E47EAB7CDEAFC10C6B595
+:10D98000A371C5721AFF649DECBF235C3A4397FFF5
+:10D99000D4AAC2AA5B9FDFBC2DACCF6F82BEA4B657
+:10D9A0008C433FD1FF6008EDFAAC99A10B48377961
+:10D9B0006E1E14908A7F87CEEAF61C403F1CFC0343
+:10D9C000A6E68F6C575FEBEBFF07133449A100808D
+:10D9D000000000001F8B080000000000000BE53C69
+:10D9E0000D705467B5DFDD7BF727C9866C42A04B0D
+:10D9F00009ED4DF879692561F909044AE06E76135D
+:10DA0000B62D9405429B0AC50B64101D5E0DB5280A
+:10DA10003EEBCB42421A420BC1E1F937AFBE2D05B6
+:10DA2000677CD631386AA1485DA0459496A63699A0
+:10DA3000521FD280790CD5AAB496577554DE39E7B7
+:10DA4000FBBEDD7B6F3685023A75DC4EE7E6BBF741
+:10DA50007CE73BE77CE7FF7E9745B315C66631F868
+:10DA6000F99386C6585F2DFC79338E83A651C2D8B0
+:10DA7000D2B1725C9934263236374F8EAB4D633655
+:10DA8000631D1E26E6B30403F8D7989BC69B8D5AE8
+:10DA900033318EB1F02255C0C708FF99E5127E4799
+:10DAA000320CF896B9C438B12469F819FB2893E30D
+:10DAB00005345E9E1EC769FC00E3EBEF4D3D6E260C
+:10DAC00060FE77A6C56F3646C0BD68B71EAFF8C703
+:10DAD000A3FF9C22E9196BE2F30F3BBD20EF9851A5
+:10DAE00085E8B9BCFF01E85D41FAB19FD3FB21A4F1
+:10DAF000EF2192E7D39CBE0F013D6D444F37D09389
+:10DB0000FFB75FEFC52A6327EECFDF808F2768DF7F
+:10DB100027723EAE02FE29E23BC4F7C1F9FCE67073
+:10DB200080317C3E8DE37BDD2DF428D164A2DE9F25
+:10DB3000755BF60DC6B37AE57A1BF4B066A57F0374
+:10DB4000D9C9B2223EFFD7A9CF9A8992CC187E06B6
+:10DB5000EEBB9CFF1B7C6E9BFF199ADFE94EC3D383
+:10DB60007A1EF15C39BC89E8CDF09B20F81E077C59
+:10DB7000A3E0AFE07047326191074B3C4AF249FBAA
+:10DB8000A5C4E3E497FA3C72BC8DEC667B29C73FE1
+:10DB9000EAF0E349A41FE47782E43D8ECBEF9F5D7A
+:10DBA0001EBF3584BE947379483DFCCE34E377A81C
+:10DBB000671F367A61FFD4F0888CFEFF1DD62BA438
+:10DBC000F5843D7DD0F9697B14719FCD4FCB77747F
+:10DBD00018EE8FAAD5E979F5DA7D919BE0CFE5CDF6
+:10DBE0004FAA26E2051856CC58BC9F2537C39A7712
+:10DBF000B0A4CA2086C543260B4CB4D835FB32D11D
+:10DC0000E1F1BBC4F8BFC8FF2D9B23F5FA5412F312
+:10DC10008B0CDDFE95B84F69BAD91336BA671FF67B
+:10DC20003F29F80E852D7672A3F1076B412E967C65
+:10DC3000283D16F259F6E057C7A01C969549BCDF5F
+:10DC400048229ED70B25DE7DB4EEB2F43ACFF171B7
+:10DC5000AE84FF29C167E8EA336D74255EA5BC4B2D
+:10DC6000D2F5CDC37DB45F9E4072CBC869706D5252
+:10DC70004209D88F8FAEDDA49A56BFC0BAF530C422
+:10DC8000B7FB597A4C7A95F103DDB4EE8DA66B7D26
+:10DC900058C847D8699ACE7E164A302B7DFBF9FECC
+:10DCA000DCE0F52D7EE121D4DB1B2FF794FB268BE6
+:10DCB000DCA51D2C0FA4EDDB603E90BB2EF1BC60FB
+:10DCC000AEF55FFFBAA0E78F5BFDC9F5F3D153470F
+:10DCD0007CBCC5F725E37F5E36EDFEE7AAE97B3223
+:10DCE0006C89E71F74FE7F87ED7666F13FDF42BEE9
+:10DCF0005BFD451ED4EF9541662481BECBF89B9B0E
+:10DD0000B98EAA55C83FA5EDB39ACF5FB2833577D8
+:10DD10004F1C0C7F53AD8BE05A9F656BBB015FD8E6
+:10DD200073B1296E814B85F9F3436185AEC0DF2164
+:10DD300092FF464EDF89B04EEB8599C60CB0A9869E
+:10DD400025634A500F5A7FCEF1B160882DCECFE0C7
+:10DD5000BB20F0C9750E2FCA6FB4F2F113B1CE8992
+:10DD600030E703E33FC9F311CE875AB02E88F8D5C8
+:10DD70003C595FFE9AE4DAEE16E3C43B14D7FAD2BC
+:10DD80007EE877A4EF4BBD522FDF23FB97F9FA3BD8
+:10DD9000E13F2513B3917EC65C53ACF37E4B7EF01E
+:10DDA0004AF3FA65BC6813FB9548EFD759A4FB4AC0
+:10DDB000F3D588D24C72F2B19402F143F50776772D
+:10DDC000022B1595C69B38FFA5C9C6AFAE060FC876
+:10DDD000E922EDCBC3F67AC4F2FCDDB0AD1EB8B8D3
+:10DDE0002E8E7860652FECDB6BCBD5E25520B7BF6C
+:10DDF000E2FE54517D10CBA65F7FCDECCB5FC3B666
+:10DE00007C3E925F0576C446B942E3F5C1F3FCB5AA
+:10DE10008AD433B14FDA93C8477BDADEF8787B21B6
+:10DE20007F9E73C4BD52D8535E2DAEF33D215F1665
+:10DE300028C6F5D8C4E329753AC45796FE192E189A
+:10DE4000AFC2BF60FDBEC85937EAC18A0EC5486679
+:10DE5000D1FB4176D221F03F96DEBF51B52308AF0A
+:10DE6000C9A68BF801BFBE8F6F22BC8D4D0AD99F0A
+:10DE7000D35EC6D672F98DAD4DCB692CD16F70BC17
+:10DE8000BE69F1F188174099774A06FF0A4177D8B1
+:10DE90001D3F7413E8417B9BA2A33F5AB9716547AC
+:10DEA000298C99E60E8D87CB049414CC6B0F96F9D0
+:10DEB000D10FBC24D6437C1ED8478C25C122826357
+:10DEC0001A5CA7C7D61FC5E97FA930AB70DDEAF899
+:10DED000CE08B235AB71DF51BCDE036E1AF3944D40
+:10DEE00073BE16AF85FDEB99E90EA1AA4176D63334
+:10DEF0000EE86A107469C6BC37D930A8A23C2C94CD
+:10DF00009A8671DD1FDA0CF71B9A3E3E9F55024C34
+:10DF1000DC3DD0EF43664C76B90CF16A03FDE55C5D
+:10DF20006697C1C72DDAE8CE8C91367CEECB3C5F8C
+:10DF3000722BF74FCB6A419E16BDFB91E0EF474233
+:10DF40009E3B80869E8984209FA1DDB0B52E94DF04
+:10DF50004A81ABA76DC95DB7017D97CA5908C75EF5
+:10DF6000E44FCDF077768CC6F963867FC148585769
+:10DF7000ECEBC916F075FF0268DB804FE047539762
+:10DF800017A42C7A7C7298C94298B79527B630D0DE
+:10DF90009388B9D3DD0F74DCDAF4F65ACCFB5698CB
+:10DFA0005E7D1E9078FFDA401DE6B54B4C2197F957
+:10DFB000EE73C8B70FFE43B978526FBEE04139CF58
+:10DFC00056D828C0BF30CA9F4BB9789976CE2A1749
+:10DFD000CD31DE78BA74FBF316F84FD5E6179FFF04
+:10DFE00008FC31954DBD0C7C82035980F45CEA50ED
+:10DFF000026A2981B918F0E9F1F17DDCDBB1FE2577
+:10E00000B4D315412DE4D2913E46F26B146BBCD7CC
+:10E01000A26F7F1E72D5C8C69D5DA877F7F7AACC00
+:10E020000B70EDCBF72226FCF9109F26F4C295F772
+:10E030009F3D1AC069FFA6325C4FCA11E41D980EBD
+:10E04000F7CFF5C17C00BDBF1AE404EBDE63787541
+:10E050001DE07267BFDD8672CA65CDA9E130BE37AB
+:10E06000E862295F862FE03B21E4E2BAACD05ABADD
+:10E0700026D775D99E935C723F17610C7D77C2E8F5
+:10E080001907708BA4DE76F0FD5C64F0FD90FBCA8E
+:10E09000A25C5FE5BEE43AF4D55BEDCEE867167DA1
+:10E0A00075EE43D2B10F7B356E27677B55CA8FCE95
+:10E0B000EE2ABEA71AE491D8E5223B863A6DBF52FC
+:10E0C000007FA414A681FCEF13F4D20FE0F63617FC
+:10E0D000263B4B33FB715FF9B13F2A958C438DCCC6
+:10E0E000F82386452C8CEF15A3FBBE9228423BFDFE
+:10E0F00028EB76A35D3FC0FADDA8FF1FC352504551
+:10E10000FF18F2E0FD465FC08372DCBBEB483EFACD
+:10E1100091D4CDEEC2F3E5642ACCEA279D5794C48E
+:10E1200079C93700A7A4FFF49941F2CB7EB8929F3A
+:10E1300036188E0BEBA23E334B1C3936D5FC31FA28
+:10E140002339D602CD0CE9D83335FE13EE77F9FC2E
+:10E15000F195C64FD17FEE9F629CC0FBDFC07C0F64
+:10E16000E2C3C5DA47A82EF94B857112EF3BFDD803
+:10E1700039F4637A461F163BF441FAB153E8C7E01D
+:10E18000D162B457901B8B5D9F1F3B2BF5E07676D9
+:10E190003BCA07F8F925F97F0DF801B99CC17D9FAD
+:10E1A000C4B0FB966245C4A61E00FA14411FDE5798
+:10E1B000C0BF2B1B7FFC4765181FCF023845EC2BD7
+:10E1C0009691751837BE1EF2F9C6A2BF304F21DFF7
+:10E1D0004EB9406076535D163C760AF5C695F7C396
+:10E1E0003166963898DED775EEB7D27CA11D4126F0
+:10E1F0008F7C28CC745D467E0240C4A8F7D38B0484
+:10E20000E941FB0285F86B2F658DE8CFDBF0D14C3F
+:10E21000D0F7054A37EAFBB722453C5F1AC7F3C27D
+:10E22000CEC26430C4FB2C04CFCA436C494506EF10
+:10E23000B7222AC14F9A66E461E082BC8FF2259929
+:10E24000AF4AB84084E795C3233CCFA8A88C1751A8
+:10E25000A02B0E91DC218F1A4E637F2AE91A29FA2E
+:10E2600022FCA7BB2C7944DFE824C33C24D7C89EFA
+:10E2700037DC1249C7F55B22C8C72E19D78D5B1151
+:10E28000FFDCE18106F4731EA07B7769265EFF60E8
+:10E29000C1175458967D24524AF45537ED6C1D0928
+:10E2A000FB1D0E8FF563DA94AA4906318FE81C0531
+:10E2B00072C8622F1B233C0E4EBB45C00979C9B8FA
+:10E2C000EF83F4DB0DEB6099EFC23CA084E7010F14
+:10E2D00044CA689ECC07003EE101B8F00493F0B454
+:10E2E0008FCFBEDE03429E99781B2A407FCD5833E4
+:10E2F000C58BB88827AFB51867064029FB5A6274EA
+:10E3000005FFDF130507774A4BE487B2C86F61DD6D
+:10E310001E1FC6EDD6F255BE7ECCFF8C08E16D5CAB
+:10E320001E3E3360F1B79D256C0CE601F736DC79B3
+:10E3300066C0626F3DF99C5E8C33096F06EF52D464
+:10E3400013A0F768D89B9A0B02CD0DB2A457A1ABCE
+:10E350005B473B88E8F43C6EAC6426D6E3D5673572
+:10E36000EA7F15B234FC26D89A483973235DF160F0
+:10E3700092E1BC5C18237C7CF6DB04BFB05A6509D3
+:10E380000B9DE07F56901E38F2A51DA86080B77DDA
+:10E39000A692DC0C781B826B28FE6C9A934BF7617B
+:10E3A000DDA417EEDF33BE89E296CCAFDAA3D1103D
+:10E3B000C5A7EBCCA78E4D8D3F84FAE809A6FDEAF0
+:10E3C000C34467C6AF6E8870BFFA19BC4AFFB1FB81
+:10E3D000E86BE43FA00621397782BCBF9B651F37FD
+:10E3E000093BE82CE47AE87CFE55A1AF7FA988B709
+:10E3F000221D06C4B4E0946BCF37DB65BE29E478F8
+:10E40000BDF201797C2962F1CB208F2F679303FC49
+:10E41000DAD05FA8D25B3CAD68A8FF3962F824333C
+:10E420009338CFC79A0948F5C719C6BBC178520CB3
+:10E43000E72D13FC7D507FFC1D486FB85F339E8E27
+:10E44000505DC8F559FA65B04B1E7FAFD16FF7BA72
+:10E45000C09F023D1D786B66E6F921B1CFCF55997B
+:10E4600087701F2794F856A2FC1F558CA05FC5BE6D
+:10E47000A7D9887E84E9536CF306AFB389F0F4958D
+:10E48000996BD1AE99BEF80AF09BC5BA824F9DF345
+:10E4900001EB7E25776C667C25BE7E10317E86F290
+:10E4A0006A35E3BF40BB7BB9DCA52714BA921D7661
+:10E4B00056E724151807A698AFF37D043F0AA83B3A
+:10E4C000CBDFA1BC68E17C85F2B4853EA8E0B2F860
+:10E4D000C9F322DE2CD4F97376DA085AFB1D855174
+:10E4E00097BDEE059530ACFD8BA86B15F6E5653C48
+:10E4F000C3BE49367BBB28EC49F5BE5D827EF5651F
+:10E500007776BFFD4EC443704A54F42544FC5BEA61
+:10E51000E5F5157B11E8B3C4D7E7AA6AFF8FE2627D
+:10E520008225144B5CEC1B7D91FC1D3DB1DC5F280A
+:10E53000FA4EACD78E47F2591465B675415F5D51FE
+:10E54000DEC750A396E74B55C6FB1E3D7679013DCD
+:10E55000BE28AFBB9B94E959E919C7A667A1E79408
+:10E560009D9EA228DF97E7AA8C22C407F17938D2B2
+:10E57000D1510BFA9745BEFB26D5DE84701A4B7439
+:10E580009495BE6FDE7A0BE291634BDEAA47EDFEF7
+:10E59000B534CAFD6B5994FC4AF6752B85DCAED7B1
+:10E5A0003F5CABDD6F73D8BBBC76F67F2FAF12E854
+:10E5B000F07A139F267B9D7875F6FDB15B7A462332
+:10E5C0009F87847EA26FC77CC3D0793EF26094EBB4
+:10E5D00071784292E09E1D22FF48C38160B02F37C0
+:10E5E000541E32F31AF390CED97D7988A7F5DDDD7C
+:10E5F0007958C73F3B509B350F3954D245743AF395
+:10E60000900343E4216BA23C5F3DFABF1ECA2B6A14
+:10E610002EF0385F73A14BD5413FD745B93F9B39A9
+:10E62000D0A39AA027359887009E03220F41F84D6A
+:10E63000A0BA9177BB54A46BE6851E9A570363CCAE
+:10E6400043660E918700152AEADDFE9ACE5771DFE8
+:10E650009CFCBE58696E885AEAADEAFE1E7A4F22CB
+:10E66000E775966FCE33699FED7A736C2AA73733BF
+:10E670008FEBBB136E28FDAA53FDE5D81FD8CA72D5
+:10E68000432887F7728655B2025ED7605EBC15419B
+:10E6900081EFADA7F39209ACAB7DFCF9677387ED11
+:10E6A000C6ABF43F3E6117EFE5DC92147590510064
+:10E6B000F33FAB1AA9B9100FB68EFB6280F3B39E7D
+:10E6C000EC6883904DED4E8DEAE93B827C1F64FE41
+:10E6D000F5D25285F24340337F01C0CF10F83DD3CD
+:10E6E000787D58AFFA096E5B39CF23EF485CA4FE02
+:10E6F000C5CC7E8FAEC37846FF1A5E2FAA3F3C9EE4
+:10E7000087F9FE4734A6C2FDA56DF156D2CFD31EC0
+:10E71000EA67C8FE42556F37C92D6FC063EB73E4DB
+:10E7200082274B59F2168F63CCD4E505D9FC90BCF7
+:10E730003AFB10FBA2A2FEAC64932E835C2EB14781
+:10E740003A9037EFF8DAA34FB1C1F3657FE1C149E1
+:10E75000C633A81FE3DCFDDF7E06E475E02D0FF570
+:10E760002D0EECDA757725F097E8D2A8AF2BEB19D0
+:10E77000905BD122AC675106D4973EB90AF5F2609E
+:10E78000BE1C834303BA0FA6DFD77F629561199F32
+:10E79000886E398771EFE00809FF269F2FC789FE31
+:10E7A00055785EE3E0283EBE14559F4AD0FEF66BD6
+:10E7B00054476FFCA53F9B7F3C5967D7D77BAAD7AF
+:10E7C000737DBDC23CF0EBAF47B3CCCB59606EABB1
+:10E7D00000791C1C70D1FB21A8B352981F3C38C98A
+:10E7E0007C03E11F3DC5E57AF0AD8702B84FDEE15D
+:10E7F000FD0F67F3F3BF11F1285DE74DE6FE83B12E
+:10E80000010DE3D68E39CF9EA884754ECE1C3F45B0
+:10E81000051640163ECC97E57C6F1DAFE332F4BD84
+:10E82000A2AE42FFF3D6B9866CF65E15357F1FB5F2
+:10E83000C1F3F7A2AD5D1AC9BFE8D8BCDD78EE27F9
+:10E8400055D3D5A3C1FE1EF88D8B619D72A042D415
+:10E85000E143D11502BA8AAE8AAE5D33B2E81BD06D
+:10E86000E5A91B3198AE97EB18C9E7C54AC387CF16
+:10E870009D7432D1C79C25FC7DCE9B5FA4BEE381F5
+:10E880007E17354F2E0DEC5651F564FFBBF354192E
+:10E8900066406CEEFCB32AAA94F9886AB3BB19A748
+:10E8A000726DE3079A87DBC6CBD68ECED821FCBF2C
+:10E8B000383AD636F6066FB78DC36CAA6DDC30FFDA
+:10E8C0000E1BBEBA40C4369E17BCDB067FA7BEC473
+:10E8D00036BEBB7C990D7E4168B5ED794D60E7167B
+:10E8E0006C1FC5274ED68633D2C7C975B00F79BD08
+:10E8F00006E9E3A3A71E0AA05EA46AE26350DFFA5A
+:10E90000F27B4AB07FFD923B7BBDF6489D2AE377C0
+:10E9100009C67B83F17A4DC287CBFA6D7DF9D57537
+:10E920003C3EAFA853B2F6099CF158C66119979DB9
+:10E93000EB3BE3AE33DE2EBC6DB78FF7FB79DC5FCC
+:10E940002AF4A0B5FC677EACD75F6AE07D84CE92E6
+:10E9500038F50DFA447C3EBAF4BE31F85E2DB7DCD2
+:10E960001CEE2DCDC4EB487992FD12FB3C81241B9B
+:10E970005B81CF936C7505F5A5B5C8447E7F82B8E1
+:10E98000BF06AF10A7EB2D7273C6DFB06FF20B0599
+:10E990002C93AF34FCC18816007D7735EDD38AE126
+:10E9A0001AF11FD6AC7EE864CDAF8A8788D39FB4B6
+:10E9B000DBC72B641F070616BF6F1C78A385F7DD26
+:10E9C0007FD0E26329E0EF744B80AE3F6F09D2FD48
+:10E9D000575A74BAB6B794D335D512A2E7AFB65426
+:10E9E000D3F5F91683AEC75A62743DDE1227B89F7D
+:10E9F000B634D2F5C51693EE6F1776FA61A1C72823
+:10EA0000977D85F8519742726DC0A3BAB32E18AAAC
+:10EA1000D5CF835CFF239B5CAF359EA46ABA47A326
+:10EA20009E41BCCA6A4FDD7532AF4FEF37D125F337
+:10EA300061AC5F504F649F0EE8FB26D2E7C5FE5CD9
+:10EA4000D1F5D37750E1741D2CE4FD1BC4B3281F0E
+:10EA5000FDF9D7E2B5E4CF474C267F1E649ADD9FCF
+:10EA6000970EF2E72BC9EED871EC93627F91DE53DB
+:10EA700038FA2005F53ACD937D90397FE07D902BD3
+:10EA8000F10F7C1F47BF25FDF6D5F2EDE4F7D85412
+:10EA9000E365C423E3F3A0F861AEA3F8512D6C96AF
+:10EAA00069EF529E9827F8D9716E7101FA172F12EB
+:10EAB000C8EB748355E33E33791E60F7DA92C17870
+:10EAC000DFA8E9A678BE2D9DE7BC4D79CCE0F865BE
+:10EAD0009703E642D6F80E7278B3AE6AB07ED6A936
+:10EAE0003FECDF0CF1F9603FE37DB269FC7D9D8C6A
+:10EAF00083072FF03EC6254D4932D8BA5AD6DC35A9
+:10EB000003AEFBBFC08AE3F8BE698C2BB41740F399
+:10EB10008E1CD07D0017EE3787E7C0F3EA540ECD88
+:10EB2000AB9D3F3989E386F8DBE49F6A357B9CC463
+:10EB30000C351D77A80956E418DF9C8157717FCBEF
+:10EB40003263C0BB6EAAA9D5035F8B2F36331DF08D
+:10EB50007B4B989BCE870C8EEFEB144B9F4D63A1A4
+:10EB60000EE443FBDC36FE5ECFA16F524EB2DF26D1
+:10EB7000EBF0279911C0F59CF8DBC47B17E7FB96F7
+:10EB8000F72ACC20C22B8163F4BE85AD65FC7C8462
+:10EB90000BEA1394DF304F726FE960BDDB3FE5CEC7
+:10EBA00031F564DF09E5C6D4ED5D0AD5EDA26E62EC
+:10EBB000FAA75CD63A46D64DCEFAE831E167655DF4
+:10EBC000F4989B51BDD5AEE486761393CD93F8FBB4
+:10EBD000B8E61978ADA9977EE90BB63AC91FA83FE8
+:10EBE0003330355B1DC7EB11777ABF4B02E7F33249
+:10EBF000FBEDF798413CDFD83E79DD5756A2BC4685
+:10EC0000F8E8FD26D3E23AFA9BC7F1443FDA7320D5
+:10EC1000C18AA767F65765DA79ECC77640F282EFCA
+:10EC200077E3F53C9F70D2E5BE46BA7023E93DB567
+:10EC3000B4771617EF25791EE913F7DB746EF70C1E
+:10EC4000FD96E53D799BDFF0052CFBF828CAD93B02
+:10EC5000F4BEAAA56D01EC6777F95D64A71DBAB68D
+:10EC6000B514C61D7E8DE729BA2B96ED7D5247BDA2
+:10EC700022F8E67405045D6A7831E53343ADD7299F
+:10EC8000F65D8E73279A06D9951E8A63BDDBEA2F3F
+:10EC900056B0CF299FAFAA57C4BE77911CB68AFC45
+:10ECA00028B7BC3BE5427D19B5662A8ACD07F9CE67
+:10ECB00079B8EF9BD84DF951FB089FED7C96BC3E8F
+:10ECC00026F06D75876254BFE7BB18D6EF5B4BB378
+:10ECD000C7C387C5FEB6EA53E2089F00B98C570642
+:10ECE000C3AD11705BDC5DC100ACBB75FCBD74DEF7
+:10ECF0006BEB1872356CF48F6F7B6A937FB07DC0BD
+:10ED000098F6CF1D60F23DBAEDDC43ABDED0B81211
+:10ED1000D6D55E6121340B6937DB313F81AB7BD4C3
+:10ED2000E246D4DF4BD5B92184AF535F4CA01CDB46
+:10ED3000438CFA165A61930FE97EB444A3730E9282
+:10ED40005EC8BB77A3FFC80FB96CF9794175AEC334
+:10ED50008FDAE981F548EF86DA5F277D94924F7963
+:10ED60001FF842B3319E05DFAB697BB7EB97FB0A17
+:10ED7000FA75257E6C71B22413278F1CFBD7D5F84A
+:10ED8000BEE371C69F3F7F6C0ED5EDCEF18DB2F321
+:10ED900056ADAB11F7A5759C87F4CF397F6B29A7CA
+:10EDA000ABB57E965837A0A0FE6FAF2ECA413FED9F
+:10EDB00047876B91EB0B95E6CFEB2D71B830DA4CB2
+:10EDC00071F8BBF58CE4E8D7E38171A017FE5E15FE
+:10EDD000740AE4EEFAF31FCEEAD72E47D66590DE2A
+:10EDE000FA59E6F76790CB30C6F5C4CF1EEBA1B851
+:10EDF000C436109C94D7F65B4F86526CE875FDD5EF
+:10EE0000F63ED307ED23FDA93EBF98E49CC37250A4
+:10EE1000CE97D8230AC5E1A841761748FB557EFE58
+:10EE2000A4580E811D1C93CA2999FE12C3F71768B6
+:10EE30005F26A33C8520478A57573AED0BCD1B2D03
+:10EE4000D0DC8C076354D47FEE772FB1B7F8FA305B
+:10EE50000DCF9F280917C5CB5B51AF01AE94997FA9
+:10EE60003C9BE55CCE9840D3BED5702D9E27FA62C0
+:10EE7000829F2BC943D2FDB7D25B19E79DFD50D9C4
+:10EE80002F7D06FBA5CA95FBA14CBB48729379ACBC
+:10EE9000B33F0A712D0FE5FEDE048D7592DC791EFD
+:10EEA00090A9D74D9FF51C9D8C97ED81C5B63EFB73
+:10EEB0000CA94B0E3EBF7785B8D8D90B7E13F3E172
+:10EEC000E066EAB3EF3FBDEA38D6E397821E9D596C
+:10EED000FC7F7BBEFD3D80C4FBF979A29F3EAA9ECC
+:10EEE000E17CADC76478FECE130C515C6855B2BFAF
+:10EEF0003F689D27F209679C70BC67F99F1C7FD211
+:10EF000053C6D2F14315FE59C657A641141D699D3B
+:10EF1000CFFDA894C77E9157761EF9049D176041D6
+:10EF20004BFFB62CCBFACEFCCF30F4C0F44C3EAA4B
+:10EF3000F4F33C54AEDF2EEAE7D6D37C3F72C5B97A
+:10EF4000A141FA5A617E7A1EF67FCA5D8E3E95DD3A
+:10EF5000DF38F35AAF8F25722DFE0FF2DA8DF328CA
+:10EF60001FB1E7A5C3638C9FEF293419F6712241C5
+:10EF700053C5BECBF4DE669501DF334EBFFF7E2C5A
+:10EF80009AC7F39CF6F25571AC7F641F79C79CBB9E
+:10EF9000C8BF421CDD3ACF52C7CA730B1FB4AF249F
+:10EFA000F575BAD847896FD0F992D91BF8FB9FD372
+:10EFB0000F9D407DDC0FFA8871BE3D3FB1AD02F37D
+:10EFC000935754B6571FDC8772F225FB49FE18D7BA
+:10EFD000534FB0FDE85C97453EFDCDAA4EF2311887
+:10EFE000BEEFD1C4FB1E67FFC8EB359A317EA76A1E
+:10EFF0008C466BFF58CA6D91D0E7376A9AE97DD489
+:10F000003343BCFF9570F89918D6D3B21F553AC94F
+:10F01000FC3EEEEBF4D87A15DD48757C3D9DA3CC23
+:10F02000FB77467520CB55927B61A923739EA53A49
+:10F03000F1F74146FD320FD689C55817F23A51D63D
+:10F040009FD24FD4A94F7794E1F98C5E8DCEDBE54A
+:10F050001DF9840FF3DE70EF6AAAD50C65691EEE08
+:10F06000A33C7F24E9BCDE3AB30AEB4CCB7B928C09
+:10F07000DF88FD02F5A0B325FE8B28E8C781168343
+:10F08000C6ED2D8D74ADD29206F253554E951B9B55
+:10F090003500CF2D7454F5C46CE31D95E619D4CB1F
+:10F0A000BCF2B8EDBE3708F82C7A0175EE3992EF54
+:10F0B000692E4FCF7C85CE152CEC675BB86DFFD3E6
+:10F0C000F8212D7663FC504EEC7DFD107F5FEAE960
+:10F0D00017EF4B1DF6B6679E4E7690B63B7C6F4A97
+:10F0E000712E41F3E9DDDF4CE067D827B9DFCA9C18
+:10F0F000CFA0EF12C3E27B693D366B0FE6B3EDAFF5
+:10F1000033F99DF01EC3F21CFE6AC2EF440E63B1D8
+:10F110000B79E6E65861137D4F2DBE87893416962C
+:10F12000F4B1CCB945A7BCB6C45CB6733161C6FBBB
+:10F1300062F2F92763A26E03765C96730FB978EEDC
+:10F14000214BFEDE24F0350B397578F8B983B98E82
+:10F15000EF3C66C6785D30D4771E9F1378AEF45DC1
+:10F16000C76201773FAE5745E722C331A4372EBEB1
+:10F17000CF1274CCEA4DB60EC32431C8B2E2B93313
+:10F18000C6CFEFA562FC3CB1276868B82F80EF6E50
+:10F19000C2D7C8CF59CAE7B32EA49F2F243D69E038
+:10F1A000CF675D30A91F24BFAFBBF3F8D83D9BC626
+:10F1B00065CED7B4633FC28FDF99F0734BBB04FDBC
+:10F1C000CEABFCCEE4DE8038A793B8758F81780C87
+:10F1D000FE5D65EDF10903098DD6FF18D127BEABA1
+:10F1E000992CF885FBAB882EC7BF0FF0C0F1E01E4D
+:10F1F000F13DCE1A9AD7CCE9CEFC7B07A13DD6EFE4
+:10F200007B261FAF6C12F0EB087E2D87CFA20F423A
+:10F210001FA7ECC15EEA55E0FB0CD1B79CD3571693
+:10F22000D3F977590EBD05B8CFD3BAE23B9FDEF8CC
+:10F230006A1FFAF3CCF7FBB7D17A5721A736C2631E
+:10F24000CAF59838CFC4ED42EABFD4876F08FDBC39
+:10F250003DA648BD7A8CE86DBA61FC7F89E8717C77
+:10F260005774253E2A2AE34FD0BC60FA5CF1D78957
+:10F27000AEEBA4477E07E6B48BEF0BFE61DDA7691A
+:10F280009D92109D2F8275BF7D23D605BCCF101E89
+:10F290005F1AEFFE58767FF381F0B292E2AB3A1F2D
+:10F2A00022C7FF0F94B0BE363046000000000000B9
+:10F2B00000000000000000001F8B0800000000009C
+:10F2C000000B93E46660F8510FC181486C62F11A3B
+:10F2D0007606866816068699AC0C0C15402CC74934
+:10F2E0009AFEE540FD8B80782E10CF00E2C940DC0D
+:10F2F00007C49D40DC02C49240F34480981F88B943
+:10F30000809815881980F8370703C3370E8439377A
+:10F3100080620F48B41B84AD7810EC3340FF6F045B
+:10F32000E2AB6484C3281E1E389D9F81A15A00C190
+:10F3300017104495CFE047B0B94429B34B1AA81F22
+:10F3400000656D40B4800300000000000000000074
+:10F350001F8B080000000000000BE57D0B7854D5E2
+:10F36000B5F03A8F79666672F2204C4280134830CD
+:10F370006A8A03840882F52420C696DA9152C5FE73
+:10F38000D60E34224A2051B1722BFD726002040164
+:10F390003BBC1414E9E00D8A8A362256ACE83F20C3
+:10F3A000B5B4B56D6CB9D55AED0DB5AD2F0C88520D
+:10F3B000FCFBEBE5EEB51F99734E661250F1B7F703
+:10F3C0000F9FEEECB35F6BAFD75E7BEDB577DCB232
+:10F3D0000FF287029CC49F8B00EE7003C0D8743A72
+:10F3E000EAB66FCC7DA49AFCFE7FDD916D7ABA9E61
+:10F3F00048878244EB01180045001779C9AFA4DEA5
+:10F40000A49F1FFED37985007B41010FF9945227F9
+:10F41000157C8DF4B3F7238860B9FCF3406957007D
+:10F42000DB99B4DD9781B54B95E9A55A156640C6C1
+:10F43000EF8697FE4EFA19BEB999B43FFE6180B6C9
+:10F4400077C22152F84886146F737218F6AB7ED0DB
+:10F4500055C9F3654006070EEF64809A34BCFB5F24
+:10F460007B83C2BB4F25F0EA19C6F712F80BD3F025
+:10F47000EF856FE4421583DFA849C37FBAF0D0F966
+:10F480000F0058DEA23F5DEE0258DD024F97570095
+:10F49000AC6CF1D2FCD2168DE6E32D619A5FAE9290
+:10F4A00026040FCBDB216992F6A16A525FF447FE76
+:10F4B0000B54796D79772169EF4DE7D540D896F7F0
+:10F4C00096EAB63C01E76098CCFB1C3E9FA52D0454
+:10F4D000071E1CDF0BC65958FE6D8A171FC75B3C01
+:10F4E00038E2CA61042F6D2F2A84D2002EDD988164
+:10F4F000F09507DC7A92B0C63981D9536124193767
+:10F50000140320F5E21B00D612B8CF0E4C790B4243
+:10F5100000F793FEDB48FF4AA8ED650F295F51E62F
+:10F52000D615C4CB76F52F5D640C2FF987783B6B2D
+:10F5300023CBA7E745F296799E0D9672D2FE977976
+:10F5400077BE2C1138E2E56EDD23A5C7E9A14B3F5C
+:10F55000FD5724EC7967FFE5BA51877C2AFAAD8024
+:10F56000E8122DF0C5EDF71C82DB82FC74BF629CB3
+:10F570007EFB25E48F92B6151B21992AEB3D4EB9EF
+:10F580001EA9374979F946159265EC7B219187725E
+:10F59000F62B2C2FADF3C7AA7AC303D67186A5E943
+:10F5A00052AEBB67CA842FCACBAF982B11BE8184E1
+:10F5B00085CEC31883A2BCFCB045A3FCB8BAA59203
+:10F5C000A6ED2D5A07959F8F95191D55BDE5F0AFF6
+:10F5D000A8A748BB3B5C40F9D0DC06C96D12F61702
+:10F5E0009D3193E4578D2A1A7DBB8EF91932EA05B5
+:10F5F000C1DFAB249DF2B749F81BF59F533E56BBC4
+:10F600008CAF607F2B46C9D212C47339E3F77257AF
+:10F61000CA3B1CFB4D0C1B65623F91DF7561BDF25F
+:10F620008A11BA42C63DBB9CF1FF2FC7DEE9453DBA
+:10F63000D833FF85451DE56300721D7CA09D221F08
+:10F640006813FBE60331CE672D0F678EBF127DF284
+:10F65000D7AAC8DAB7506FB49733BDE184AB7868E6
+:10F660002A1C0DF4E6B7F272C26748A748DF7CE6B1
+:10F670004C37B424E175C243EB5AC294EFD6B4E8D8
+:10F68000345DC9F9D0853C554CF29C0FA1B09AE687
+:10F69000B3AE57B098AE4703A6272146E05C87FC7F
+:10F6A00079017E5F6A18A5A479A5C8434A26BA7F66
+:10F6B0000D9697D0BC01A5C89FA2FC31D320EDF3D5
+:10F6C00079FD29D263669C20699D8FE5EBA56EC309
+:10F6D0002CB5B65F691813D3F5493E55576EED8FBB
+:10F6E000F45F6585E7395A5FF4D7201D324C925F8D
+:10F6F000E363FDB5492F7F2EFDDF2E25C2B8D0ACC8
+:10F7000070F473BBC89B09C3A84A8F53B6F851C3A2
+:10F71000B496C3A3B6F29AC509D32478BB0BA2C38F
+:10F720002542DFE2A9D13010FAFBA2491397DA345F
+:10F730007C0CDFE9F9DD49E1F597B3F22AE9F746F8
+:10F74000DC429F5AE93726C22FEC1B85F3ABFCF352
+:10F75000D29B5F20FCAAE4BA23D4CE282499F1647A
+:10F76000BCE931D0091C723806A80F94B0FA77AB07
+:10F770001C08FE23708EA3704E8ECEC802A769852A
+:10F7800053C0D11FDC028EEC7CCAC677F253DD6514
+:10F79000E37E3B91B0B8AFD315413BAF00F144F4E9
+:10F7A000007CB4CE7091EF05D308EE754AB71930DE
+:10F7B000BC77BF85534B206959C73F6BBA0EC7FC56
+:10F7C000588AB7EF4863D3F425F999563C8EE3F590
+:10F7D0009CFC27E6E7EE35BFEFDAE6076A221C0D50
+:10F7E000F63FBF35BEC88C68A077BD5F4ACC8EAEF1
+:10F7F0009B32EEEBC0C6030FD15F7938DEE8F478B8
+:10F80000795F21E361676A32E378F993C978DE337F
+:10F81000874FA73C0A787DBDE05D6783F776179137
+:10F82000DB0CF43FD3F09EAAFCF989FEA5F257D970
+:10F83000B7FC7DD6FDE5E1AF849FDE57217511C190
+:10F84000D7828BBD49534AEBB9CF1B5F055844E8BB
+:10F85000B7E0D7630E5D246386F0F597D2E3CF97C8
+:10F86000740A7736FECE361F80A4AD9FFF57F3C9CA
+:10F8700086D733AD874E55BF2EF9839FEEEF969610
+:10F880004312E569E9818BE93E73E90B930602E9CE
+:10F89000C7D5762E18645279DCCE588A7606F63FA4
+:10F8A000F9D4EC8CDB5BA0A395185D4F84A2D42E19
+:10F8B0005A2A016DBF8AD86D4962BF54BFD8EE9DE8
+:10F8C00019A076154D97BA80DA31D52FEED726914B
+:10F8D00029F82BF24721EF2FF589EF07EBD1CE5D09
+:10F8E000594EBE13D6581A64FD91EF51AC9F53C1C7
+:10F8F000BE67832BA792C063C1BBCF9D8C65D28F9F
+:10F900005F96658A9F4DDCEE5A8D761751C83E7F13
+:10F91000228676B5BFC8ADDF27F56E37436676FF22
+:10F92000FA8A9F98E8D25881F61B99FFBECBEF87E1
+:10F93000AE2A5C0713868CED23CC35B0C9B1DE0747
+:10F94000D086A3EB66589A44D64CBF23BF5AD4370F
+:10F95000F55AB4D74295ACBC76C985B5716B399C64
+:10F96000578BEBAE28BF66C9585A5EEC8DBE3C91F2
+:10F970008C5F4CF4679CE0A9584D48CD949E99F952
+:10F9800065FDB5DE194902C3FACBEF2CBB36039EE9
+:10F990000815299D45BEA4C12E5F9B38DE56733CD9
+:10F9A0008651C62D7ACDC7AAF6E835DF594CAFF996
+:10F9B0002B138B11CF250D10413B7B3DC15FCC320A
+:10F9C000BEAFD2AEDF8A55FBBCCED47CEE02E32ABA
+:10F9D0007940F6FE9DF27517C46662FD62BE8EFB2D
+:10F9E0002B9352ACAAFFF93BE79B6DDE5FE5F82451
+:10F9F000E3CCCF34CEE78597E20019A7FAB31FC74F
+:10FA0000DF60D793A78A77686C37705F8DA626EE84
+:10FA10009B7D303992A2FBB9DBA81FEE160E3BC4CA
+:10FA2000366968D7C40132EA33B5DC9DF6A7E1FF39
+:10FA300094AB7333D145A40B5F7D2F6FBFA57E526E
+:10FA40000E16FE3D87FC723E9C7F5249B707EEEFD3
+:10FA500053051C817CDBBC4EB41CCDDB4FF4C61AB5
+:10FA60006D1AD5C7D9C67B90E8D11491AF075ABC9F
+:10FA700034DDD6A2418AC8D9BF1379C3FC56227F90
+:10FA800098FE88EC1731BDB72542CBEF691947F3D3
+:10FA90009B5A0C9ABFABA59EA61B5AA2F4FBBA9622
+:10FAA0001934DF83CF8FC87835946501EDAAB36729
+:10FAB000244DD463B003221504BFCBF1BB05FED5A2
+:10FAC00072EDB332FA3D67F8A87F23C8E7E987A44F
+:10FAD00081FA1B0E2AB00DB2CFEB0E3EAFAF28322B
+:10FAE000F39FAA957470414FB91DA85FA5A89AAC61
+:10FAF0005B44E5E65ED89A8FFC5E54CDBE07038476
+:10FB000091C877A51A52BE101D5AC5F61A6FDF3676
+:10FB10004EA6F5566B2A6DEFE48B73A193AE33605E
+:10FB2000782308A777BCCAEA57B1753278FE3EA49D
+:10FB300020B44D94E9FAB9BA9CC1A168767E09D681
+:10FB4000DC0768EF879561741EAB2F50370D473681
+:10FB500080CE9787937E3690AD0DAE6B0F6CDEA98D
+:10FB6000CDB4D0D9AB30FBFCDCE93BA315088F4A00
+:10FB7000E49A8C5FB8D99FC47587D0434178737C71
+:10FB80006C3EE7E298048EC24590BCAF2C5D1EC867
+:10FB9000E3F3D18C5AEA9710DFB9E23957EF48C93D
+:10FBA000D86E2344EE8374B94FB433ECED7CA29D40
+:10FBB0009942DC42E12A7B3BBF6807B5B6767ED12D
+:10FBC0000ED61A74BC0469A7A7CB15DEAE47EE2B80
+:10FBD00035D92A674A409799DCD8E9948D7F34E07B
+:10FBE00074D8674A27115FD52C2F49DEB69332AE01
+:10FBF000B3763AF951CEAD7A2660C913D245517623
+:10FC000071BFC6E9953433D36B9D1AF94539CEAF30
+:10FC10004AB5CD4FD0699D97D3D1F467A4D33A8D1F
+:10FC2000D33106363A0B7AAD13F46AB4E34FD06B96
+:10FC30005D167AAD13F46ACE4CAF7559E8B54ED067
+:10FC4000ABC1DE4ED0CB490FB1EEA4E9D62C21DDFD
+:10FC5000CE143D9C7AE10559A7DFE5F6A39D680F18
+:10FC6000162D50D93EA9B21350CF43697E3F76ABD3
+:10FC7000C9ED93665A7F2DFE2AFC5F28A76E96BFBA
+:10FC8000267EA816EDF07C4994EFAB457F5812CB49
+:10FC900089FD7573FC382D7F528EC614DA5F1270A1
+:10FCA0003FE2C497279A848D04A40A357A6905FA3D
+:10FCB0002537CB11F4DF0A783C20F004FCFCE6D4B5
+:10FCC000F81F80E10BC13B39FC94E0BC45A1F84C26
+:10FCD000323C39E124FBCB8D645F3384F3F710F3BE
+:10FCE000CCC0090D6CBDE8599FB99DE482CCFD5490
+:10FCF0006E966D7C3362BDDFC637E5ABF26DE5C352
+:10FD00005A4B6C797DD1305BFD210BCEB195973686
+:10FD10008EB69597345C60CB87AFAEB3E57BF10BC5
+:10FD2000CFB72BAF2CB6F18B39A20EF76D496074AB
+:10FD3000D81E1F5187FBB6FECABF7E8B6A7809FEAC
+:10FD4000D542375D870805297E04BE723530DDE86F
+:10FD50001F280C242F21E57ECD30A93F403300F72A
+:10FD600073B216A37957D82E5F5F4301227CFAF550
+:10FD7000AD2A780BFBECDFF824FDF7372F27BF887F
+:10FD8000F55D2964EBEA06B25DC2F33593E8C76D11
+:10FD9000645C97C6D67597E01FC2CFA8573455E26A
+:10FDA000F27B7A72367CA31DDEB2843D3FB4CD6116
+:10FDB000079E227F7F5EF2DB1FFED641C4544E01B8
+:10FDC0007F1155E2E7D5A727FFA58D76FC9434B8BF
+:10FDD0001D72E2D0E79F33FE5AC57A01D13AC44B77
+:10FDE000CE7AE64341BB2B935D21F865C3F49BFCBF
+:10FDF000D6F50CACEBD4B0F43834AF64CA7FD1F88C
+:10FE0000A4AB16ED8B9C8564FE65CC8EC9387F4E05
+:10FE1000EF755365BFD50EFBA2CF3F4DE71F9C5634
+:10FE2000FB700FBCA51ADDAF89BC635FD6BBBDC933
+:10FE3000F44DCC275BF524F9A954ABD135E98F20DB
+:10FE40009F9DF08546422ED91F7A597AA6F76D0FED
+:10FE50004C67FB12F3D59C6405E293C771AC7DF54A
+:10FE60004B4984273955863BF19C79B29CAC20F9EB
+:10FE70005BFDA1FB10AE6F2AB15BD50108EF9024AA
+:10FE80009E1783AAE74D0B5AE6C9ED2231FF6CF6A7
+:10FE9000D192D69BEDEB194CAFB3F2E35DADCB69DC
+:10FEA00039B13B5A554AAF2F8A7D9415CE4DEA178A
+:10FEB000D83E12E703CEF6FF2AF6D101B57189DDEF
+:10FEC0003EDACDE8008C0E2FB4EEAE3B9572611F8A
+:10FED000F9036EBEAF77D82F95C43EC2F3A300B727
+:10FEE0005F2A93D45EF1552699FD5229EC19FB7ACD
+:10FEF00076231AA063D3F6511FFD1B9FA4FFFEE6D5
+:10FF0000956D7DF705847D9460F611C135C69928FD
+:10FF1000446DF846225FD8D7F76A5796F5FD7F8C77
+:10FF20007D94597EFBC3DF3A4830FBA81FFC4DCFC0
+:10FF300086BF7F71FB68BB0AFF9FD947D9F8E47F72
+:10FF4000B67D94A6F36763E738ED1A61479C69FBB9
+:10FF500046D827C48EA1769649EC2CB4734EC89A25
+:10FF6000EF4E32CF5B15DD877EEAB55C5E17AAD116
+:10FF7000352EBA7EEB7968676C447D3E80EB59B4D0
+:10FF800083023C3E4F8DC0B42F61FDD84697E51CDF
+:10FF90004209E8793DE7365F203C103BAF522DB473
+:10FFA000CC9FE345E061972B8FD3BBF9FC289BD70F
+:10FFB000E3140FA04BD4DE52751FA64FF3F58DAEA0
+:10FFC000C7D5567CB0BC52AF27511E48FBA75D0376
+:10FFD0006C78F1D9F042D621361E28CC9E336DF1D3
+:10FFE0006CFE6A4D42BF39C97622FFD2F3721D20E2
+:10FFF0000889FA11A4FF82D8B21B311E33F8EAA592
+:020000022000DC
+:100000006F615C6341D74C1ADFD85A35FA401DA99D
+:10001000971BD12E9FA2E3BA0AD4CFB8023BA3E725
+:10002000A110AF0DF0731C22DFBF597A9CAF9B0665
+:10003000D8ED725957853F69587679213FD2494F9B
+:10004000EFF6D9E4C365956B2A9F379D9A7C4E6580
+:10005000726D927FA82FF21CFDE41A8EF304B0E4B7
+:1000600049F9879C8F8985F2B98CA7C15AAF4EF8A0
+:10007000CD552E6B181F990B5A1EF29F7FB20A297D
+:10008000F4BF141E35D105DB1F5D5AB91F1D25F0C5
+:1000900072CB7E22E866F21A9ED55AB68CF47BBCEF
+:1000A0009AC5DF1768E4BFD1BDE7B392CB574FBE07
+:1000B000EA3E7A6E1A27FC340CF9B84AA6F70856BD
+:1000C00094333D2EEA9DE7966CF7082CFB365DAD28
+:1000D000E1F634C18F522E1B68077C5AFE503E2138
+:1000E0007FE44CB5DB05A74BAF89FC5EC5A9F2C721
+:1000F000A71D4FD0B5B75C2DE6746DF0A2DDBF2C07
+:100100003CADCF73D4DE745D4BE9EA2F072399A190
+:10011000FF5AB794317ED6B93F72DAEBCAC09A194A
+:100120005BFBA25BA1D32E63FDFA162AFA5F51791D
+:10013000A91A5D07BCBCBF15FA5A13D793E36833FD
+:10014000107C28895129D49F500EF41C111906CF18
+:100150004D7DBA41F7E17405AA49C3E72E956DE3D9
+:10016000A9857EBB5D3DC394ACF0FB16BA291C5E2D
+:100170001C0FF5B4C6CE3DD58038F774EC1F1D7644
+:10018000C3F2D2D119E30CD4CF6ABF3ADD0EEF2906
+:10019000B70BA8FADF2D7654F6762AFCDD624FAD58
+:1001A000427EB7D07F990B764B641D8E87AF8098C7
+:1001B0004EF258540CD086E978E4C3D11A5DBFB62C
+:1001C0004BF47C988AB48EFFB173A2ABDC3AED4756
+:1001D000F6C6289E948001B4BE7E6AE7482706B31F
+:1001E000B8A56112D8EA3FEC76D37215A2F43CFDB3
+:1001F000C46B978469BF06F9549386C3D9EF55EE53
+:10020000D8C36E6CA73178B001F5478C637E81B09E
+:1002100097B53B31B3EFB8818D285F6759F23C2E1B
+:100220000BDA4E2DAEEB0419B3B38AF2BF1FF7B54C
+:100230009060F6D0504EB3AD8BF2E9F7ADAD7DCB0B
+:10024000F9DD5CCEB770FBA81DED238BDCB7F3782E
+:10025000B36D12D8EE595478587CD63B5CEEB77A21
+:100260004D1FBDAFF0DC0ADF088C7739A8447C0451
+:100270000FE5D71AF9B13EF05091B0CBDBE9C67764
+:10028000BCEACE1CDF91ADBD88EBF8B478D9C6F7D7
+:1002900031159ED971BA6F495D44E5B398F34DF1BC
+:1002A0001CA076ED5013923AD6FDE82458F983FC51
+:1002B000EC433F454903190BE915930DD41F251B4A
+:1002C000DC4999CABB763BB60F1F5458AC21188144
+:1002D0009935945569FBB0F2422D8ADA706E9FC150
+:1002E0002AFBBD8BD245F6FB52258E7B1261B4EF03
+:1002F00042E877B5D42BFBF4F40879083DCEFDFC39
+:10030000E9D1AE1A7ECDD2BE5C82684786FECA3D78
+:10031000CCEE285FB39EC5813504E07531DF6148BE
+:1003200057231F17832D89FB16E3399BD9C0E26B36
+:100330000635826CE5E3319E1CDA8F0B0CF32C82C0
+:10034000B7A5DFBEA2EB19A4EB44B0E9B10CFA6388
+:100350008C87C88BAB90E98FF6C434967EA4D0F519
+:1003600023BC08924B08889363B1C52EA4FF1CA040
+:1003700071E8E186E6BD185F5DDC08111C86F015AA
+:10038000E5AFF00C481A945FE06098F0C76036154E
+:10039000188C7C81EBCF02465FC117258DF6FB36AA
+:1003A000E1067BBE88DBFD45CEFB5B8E7E8A7576E3
+:1003B0000F4A5F2403DEFB83E9F6FB3661E87AF03F
+:1003C00001846F7F2092427E351DE338FA572176F3
+:1003D0008587E0F389EF4FFDE559A4FE8F16D5150B
+:1003E000205EB67AA3B9F45E515BE6B8B35EFC2A30
+:1003F000EC8E2CF5D37AD4B4C5353BD3651545378F
+:10040000CF2270AC081A40F59A7915D5EF0A97DF1C
+:10041000E78AAFF0623CE9D2C0E85CD4B37B314FED
+:10042000D2A5E111346E57F4A3F0F85D918F737D7E
+:10043000EA1CEF160FD3A37F07E316C4C3284F2C83
+:100440008CF376858B1E9FA9D3F3422399A1DD758A
+:100450001E3FB32F75F59F56FC93055CA372087081
+:100460005AFE85599E581BF2A75947B613C8FFC3B9
+:10047000201947FA3727B8DFBDA7DE6A5ECFA47E12
+:100480004F512F9600EBBE93D45B8BF321F50C5BA1
+:10049000BD68AF7A77F17A601BD7E835EE66011F49
+:1004A00058FB8BF4EA6F2BEF8FDA833DF5F45EFD9A
+:1004B000DDCFFB336CF5B45EF51E16F0D9C605FB37
+:1004C000B83DE5E7B89371AAB7593CFDBE8A2994B7
+:1004D0005FF6574CA99F45C6B9F9172EAE23AEA1BA
+:1004E000EBB6E0ABBDBC5E2BF25515DEC385B64660
+:1004F000BC07CCEF09C703D3BC31CBF71EBE0A4CF7
+:10050000D3327F9F65ABAFB6F9C01843BFD3FAAD06
+:100510001F2BDCEF9D3719FD71CB0B65EE9FFB5B4D
+:10052000DC50891E1BA0DAF26D61563ED2FBB7B8D3
+:1005300089778AF83D18A22B9FAEB2C877CFF89F73
+:1005400017FCFC3C230DFFFB71A3DC0A3FCB0BF82F
+:1005500045DE5BCCCA47B7BD3F092F56897B00C338
+:10056000DB0A5AA9FFE20B3B3FA9D53E3F964FCF8E
+:100570008FE5C5FCAADBA4C9FF5AF3CB6DB5F31F09
+:10058000CBA7E7C7F2627E356DB9A7353F673DBCA3
+:10059000AF847A7E45C5FD615C7756E0424AFA1D1C
+:1005A000D7F6527C31C9DF3E40D8DB3AD5EFA3C045
+:1005B00038C73BB6FF76BFC2E037D2D61B64E7C16F
+:1005C00050E1E6E7C18930FA39DFF0683C8E8EC130
+:1005D000A978EDF9A1981F90CE935FFE89EB308644
+:1005E00029B2FDA443CFF7B3AE2D2D66EBC9B2609F
+:1005F00044B6AE6B220EFAB9013554FFC435A67F5E
+:10060000F60EE0FAA890AC6BCC9F47EBBBB8BE5A95
+:10061000DBC2DE0B48F0FBB0F1C2D1143F09711F01
+:10062000D69C62D36FFB6AA71C40FFD5B183EC9DBB
+:1006300088A7BC6CDD5BDA021DECDD032FBDD7FDA6
+:100640002CE937462AEC21F61EA63F25F61EA6BB4E
+:100650005BC234FD498B4ED39D645C4C1F6D894059
+:100660008C8CBFA3651C4DEFE2FBAB0D682F92F4A1
+:10067000CB8532F55B6C6D2196B20BFDBD5E9ADECB
+:10068000DBA2AD522BD0DF1BA6F963D2B4EBBC7456
+:10069000FFDA15CF25703EF1BB727A4F7C62A14A1A
+:1006A000D75F50534A6E75FABBC0EB31A9AE11DB70
+:1006B0005D1096593D6F321ECA5CEF46AC372EACCA
+:1006C000527820602AA1C28CF5BE87FC5513E0FD4C
+:1006D00069B17830737FB7617FA303BCBF423D1E11
+:1006E000C8DC9F89FD8DD4181E20DCB5242773BD7E
+:1006F000A558AF4AE3F32D4DC93999C7BD1DEBE5A8
+:10070000E727E8FD9D8BAE066A8FBA0AF5ADD46780
+:10071000C1EB25074441267C9E5F9068C67A17C6C8
+:1007200022308C8CAF872220137E7605487915DE27
+:100730002527FD9074C274528EE74258FE254B392E
+:10074000B627E9F819BC7DAEBD5C8CE76A839EFBD9
+:10075000D37869DCD56ACFE7C94C3E1F6ABB6A32E1
+:10076000CA7D1E3F7FFA35E6C9B8AE4520F411AB0D
+:10077000EF67E5CF88FA2156FE1ACFE7E7B379FB9A
+:10078000A67869BCF0BDB78C289E55959EEFE0EF2A
+:10079000559E3DCB32BF7BBF7741F1AC407A3E8363
+:1007A0006F9D78F6AC3EF63D05F572CF9B24A8B759
+:1007B000F21255547F8EF244A97D386A608D81F221
+:1007C000ACAC6270BDEB2D6B5DA252B84C7A4F930E
+:1007D000C375CF3C3B5C83E6DBE1BA67BE1DAE412F
+:1007E0004D7DC3F59497E9B56CF091F10DEBF85B95
+:1007F000FECD3EFE90EFDBC7DFF27DFBF8436EFBE4
+:10080000D4E3A7AC74D97CA37DFCD29BECE36FBE90
+:10081000C93E7EE9CD9F6EFCCFCA1EBFD01BFBA791
+:1008200097DBBB8AD5EE6C8ED9EC5352EF24AF67C1
+:100830002A563B3616B3D9A7A49EEAE3F6AEAD5EC0
+:10084000B4573D9F8FDBBBB6718D5EE386787F2901
+:10085000D9DA5FA4577F05BC9E295BFBD37BF517D4
+:10086000E6E31AB67A5AAF7A83057CB671C13E2E9A
+:10087000F038B05B791C189577527FE1D5649F5DA5
+:1008800086FBD0A884FB7DAD0046EDC7FB26C3D90F
+:10089000BB477953160EC5F55C9AB2F02C5CFFDAB3
+:1008A000F2C0B66F9BE2637E84B13E85A65A0E34D9
+:1008B00053FF9DB7B9F872CBBDD72DBC5E4F79A061
+:1008C000B9F81B96F24B78FB367E6F70B2EFB7D457
+:1008D0001ED10691FA19FC66978AFE783914463AB9
+:1008E0000D02F75D574D1B6BD5CF5B7C2E3A7F6DAC
+:1008F000281FB734335C6D656CDC7B71DC007E17C0
+:10090000F6477331C5B7C652F17D4370B6F457C48C
+:100910006ABB97AEEB6EBEAEE7B99B1F282370C4CF
+:1009200007CB80F7229697F6EDCF696DB19F2FA880
+:100930005AD4C07D5FC91C6D348A47B67677D7CB51
+:10094000F599CE1F1AF87C5AE7D425CAC9F8B0DF4A
+:10095000EEC7250C0ED6FBC857B9630DBE4C7EDC26
+:1009600056AFCDBEC92B9A960B7DCC23DE62F7E342
+:1009700012D56B64A2DB4A1F3F1F39E8B5D95B79FA
+:10098000F932DD771EAF62E7066016533F610F5EF6
+:100990004BEABCD6F15738C6F3C13403D7015CA685
+:1009A000505EDCE5EC5D157F61422BD3D17FD049F1
+:1009B000CF0381DF7713FDB686A7D1FDF8717E0FD7
+:1009C000560D276A99DF91C3A7715DC5C729D9A8BC
+:1009D00042AA808CED8AADF48DB5D2CDA4F74B4EF2
+:1009E000B89297D2F79ECA08FDA5DEF3BFD3C7FC25
+:1009F000C577EBD37E5B9681BEF7A0B3D8D26FC923
+:100A0000876E488DC95E3F5D8FC1D5C3B761C2AFE8
+:100A100028FF3AE75BB7F1235FA6780BA11FF839EF
+:100A2000F8AC71C07FF42BFF44E671FD01177B77B2
+:100A300041DCB7E1A5D773BFE92CEE776D8068087C
+:100A40000BDF05B91EE5EC5DF85D688C85FE4FFB9C
+:100A5000DC0CAE3617F5778973DF6B132E9B3FECFA
+:100A6000BA8DF6FC6C9856847A6BF67A17F5AF5D02
+:100A7000EFF0D33ECCE77B1D342F433B5EDCDB9EA7
+:100A8000A5818AEFF2CC7BF2DE1ABC1FB5CFC7EE90
+:100A9000EFBD4DF846B7C8DB0D81A41BEF01BCBE0E
+:100AA0006BCC151300DB279795A0BECD838CEFBED2
+:100AB0007DB7CD0E5F7FF03BE10558D2271CEA766B
+:100AC00029A37FABD327CE8919BDB2C57988B88B4E
+:100AD000639C8F7AFC307FCEE17E18167FD15FFB5E
+:100AE00013FDB49FE7ED72A3FC34A9CDF5929C3EB3
+:100AF0009FF2B862C620324FD7EEDAD420B0D56B61
+:100B0000EBBBDED12940F5657314F948D49B0FA4E3
+:100B10001ECAE59ECB4D5BBD72526F78F67ADD5CE6
+:100B2000AFFE7CC7BFBBD11FF9EE43872E43B99CF4
+:100B3000FBB4025E326EF78E20A4E83E36E9C6FDB5
+:100B4000DC0DBB948CE7B9346280F43FF7C741BA3F
+:100B50005EDEB0D3939C4ADADFF093D74702C143FD
+:100B6000F792A3CF0FC275F721899DAB9A5D2371D0
+:100B70005DBB4185EF4433F437C0CFF8F0F0533913
+:100B80003390CED2F6BDD7D07E3BAE74792CFA220C
+:100B9000E077897ACC1FF7A044E3A37BC3C7CEC11B
+:100BA0000E3F2831F876BB923E846FFB56778CC09F
+:100BB000D1B4FD3DCA57937EFC4808F1D0B45BB177
+:100BC000F9899BB62B29CF489A1EC214CF57A41A75
+:100BD000C427D38FF377CDA3FEF3F91D2BDF534248
+:100BE000D8DECEDF042F9114E2F525253215F38FE0
+:100BF0003F10D209AADEEEDC1642BC927E67BA73C1
+:100C0000F11CD8EEF7C6FE3FCCEFDD1FC05137F226
+:100C10005753C70A36DEAEAFBD81FAA5C921476F6B
+:100C2000E32FC5BDCF5D2EF43BCEC1B6179C927DA0
+:100C300039F791E35B4C32EEE19DEF6C3109FC8DAD
+:100C4000FFF5FE96DBD00E7AD6A7A11E687AE83FA4
+:100C500042605937AFF43379EC7EF081FBEF26F236
+:100C6000D1FD470F5D3FBA9F7963884EE6DDFDD821
+:100C7000FF29D249FD05CF5C4CFD050B9E9834B091
+:100C8000AFF513F935697D978CDF3FD77793710600
+:100C900092EC1E9E3AE8F3DC2E057C04CE775FF6DC
+:100CA000D07B524DE4DBC2D148AF79542F637E1123
+:100CB000C1F3FC1DCBDF534666C2B73948C64B07AC
+:100CC00040C4308CF4FEC6D72FACC6D445CF579A5B
+:100CD000E028D5ABCE764D07095DCFCB4EC7E3F00C
+:100CE000911BE3569A76AC60E376103A867AD3F19C
+:100CF0005DFC657C6F3A7ECF41C7E3D0F8233C1F93
+:100D0000845D0519CF85C5F9D9BC27BED9A7BD25F6
+:100D1000F4427F789E2331B8EAFCC6323FCAD7CE70
+:100D200087EFBFBB90D1792A414CF723C78700E1F9
+:100D300093375D47AF41FD78F4198F86EBFD0DCFFA
+:100D4000BC44E5ADFB8917DD3AB5BF2120117BA37B
+:100D50001B7A7E3AD1FE982FB14C537B30E509A522
+:100D6000E9353F7979BD1EA2DF0FD1EF492607F3A0
+:100D7000937BA74B19E8F7AC9FDDE786E4008A97E1
+:100D800079ED7F72D373700B5DA57148CF4353F03B
+:100D90007B367A8AF96B38FFF32D746D67F29B4DC1
+:100DA0004EBBB77A548C6B70D2B9DBC5F6094D498E
+:100DB000E9A54C7417EBE0E99EAB3EE5946F3EEF7E
+:100DC000FEE4BBFFF99C1EBEB6FB751BDF08BC1D15
+:100DD000FE28B3DE3FE897381CCDF525C37BAF83F3
+:100DE0002A44CD416569780FD3B7C948FA9042DFEC
+:100DF0003B5DD6F11CD5DF4E3D313F8B9DFD37AEBF
+:100E00009FE6EFDE3B12F5D9E17D4F517E9CBFE3BB
+:100E1000901BF737CF6F7FDCDD5595E67F5C17AC15
+:100E2000EF5B1C7E74EF48AABFB1FF0CF439C6FB20
+:100E30006FDA63EFBF69C77BB6FEE79A1D6EEA5FA4
+:100E4000ED679CB755E34A9CEFDB9D2EC07793DEA0
+:100E5000EE50EA33D9412FF175B127AE2658F3325F
+:100E6000FA27957CB78EFAAF75B1F112BE9B68BEBA
+:100E7000E862EF56AAC6CB1E229FF13CB78EFBDE7E
+:100E8000D6E015A05BF478C2814FAD50ABC5FD80B4
+:100E900036395A6DDD7F09F8F30CD906FF8260FD03
+:100EA000407CEF0AF7713ABE53A14698FF3A34A549
+:100EB0009EDE7BD464CD9771DD66FDA1DF0EF9DF88
+:100EC000A5C9A05BF86BD4A42BCE45979D0ABA6D3B
+:100ED0003FB066323B0F16F35F33183603D1C36B56
+:100EE000A4A307F09D08F352166728EC3BE0FBFE35
+:100EF00010EEFBCB7ADB7B60183AEA23AA8E7436BD
+:100F0000BE61B9E79C8EE3055D56309E39423701DC
+:100F10002AC468108617E36C87E3BEAB83A601A2E0
+:100F2000DE309D98338CF1371CA5F9B5F57FA171A2
+:100F30008F8539D1513903309F2FB179A4E83E4FC5
+:100F40005CE397734A8BFBD20730593D6CF52779E8
+:100F50006033DDCFA03BF364411A2F22DE4EF4BB99
+:100F6000C63751C2F508E73908DF69C3478E2CEF51
+:100F70007088F8C90122EF18076B6A357C09A6A2B0
+:100F800019935CC3F17C3F21E1FC4AA083A6A5D064
+:100F900049D37CAF26A914BE57A9BF4B86BFC0C991
+:100FA0001C077CA760C73BEDEF5B15FD9518A1639F
+:100FB0009CEF73EECBB3C7237D3B87E9991B73642A
+:100FC00011FF1CB3EEDBE2D04871E02B64CF93F548
+:100FD000C8414EECDA1C0B9F29814E165FE6D82FD4
+:100FE0005FAC2CA2E7FBCBC37DC7752DC5F8F0B372
+:100FF000B297270678676E050A3FF383495E16E7C6
+:101000006D80AE59F91163796AAC719386ED3D1D1F
+:1010100017F2A182783669EA43B922690EF215A166
+:10102000C34ACE8741E8E29D1CA5FE8F2DEE581CD9
+:10103000F97060794C62C1445189F9D50CC5CA0771
+:1010400072CED5C57DC56DC174C22796B899FB38DF
+:101050005D541554FF68846733A7BF933FED71B0AB
+:10106000C2AE0BF09C87C7E3FDACFA77F4FD17B571
+:101070003040E35F02D5AD37E2FBAD2A346BA857B1
+:101080000322BE25C2E216C5BEDA57698F17F538AE
+:10109000E2635D7CFFDE2B5E9CAFC777E0870C765A
+:1010A000B3733D7E3827739C138CCB1C9728ECB40C
+:1010B0004FCAFF62FFD9E8ED7C9E02A11934AE53FE
+:1010C000E57E8BDAE91AF5B71FD921B1F7361CFC9A
+:1010D000746467EE48D49728CFF87E790EFF2EED22
+:1010E000D8BB17EDABD6101879F954FFE90AC1FF48
+:1010F0003269945722E9BC5DEFFDE669F4E3EF51F4
+:1011000000DF753B42E6D889F3548D3C245A0EAC7F
+:10111000B2D1F993CEABF7392693BF9B34217F012F
+:10112000DAEED80E89BDF303E7DE85EF5D351D707D
+:101130004192941F03D6EFB1CDCC6EB8EE178FD786
+:101140001049808D1C1E5CBFACEB4C41BD1F740B65
+:101150009F84C5BA601A9DF8DE7303C7CF8068BE4E
+:10116000AD9E98DF3BB3EA0F50FF4F8CBDFF3C7044
+:101170004689AD7FE0FE119DFC43BEECE5679063C0
+:101180006EA0EB4A343745ED20B29FC6FD47528A28
+:1011900020DC4E7FCAFCDD125DCFAE27EB19BEC747
+:1011A000767DD2B11F75C45309FC3BF9560E703BD6
+:1011B0003200812C788EA4AAE9F92C95BB9B7EA1E4
+:1011C000507BECA647A4248DA7EE3A2B1728DE15FA
+:1011D000EA977A039AEF242B4C9ABF1DF8F384ED1B
+:1011E00078F7E976BCE754DAF11B8CD8F1E8C473E0
+:1011F000EEB861B6FA73954637653E8EEF4AF20F48
+:10120000F14DF4249DC77C328F94DE1B9F73F6ACA6
+:101210005986FE927EF1E8C0DF390EFC1D873D7BCA
+:10122000592944BD4596F84F3545E5CA2987024FEF
+:10123000A55A672DFD1609523F7598772235B0766D
+:1012400025DE0E2654A323540E459C724ECFBAFAC7
+:101250003A9C24E9CD97EF3F340BB2CB5D478B37F7
+:10126000D2E0C2F371883454E079B946D3CD58FF47
+:10127000BCBED65B838EE7828886E91DFCDCE44831
+:10128000157B17A923F54111DA7F778C3E7A19DA9D
+:10129000FD4DD74294BECB1464EBEF2E9E4E0EB2A2
+:1012A00038EBDBA33218E82FD8A32425F44369C612
+:1012B0002F2E42BB6D8F4BA7EB9F76F437FF8B969B
+:1012C0008FD1F01CA3584E8CC271497DEAEF3FB21A
+:1012D000E7F5D0772DF651F7EE7567E3FAB4498656
+:1012E0003999F6010D01367E77E55F8A902DE77911
+:1012F0008FD27DF9F22EBB9FCDBD8BF9E1E6EFBE1B
+:101300009CDAA3FB67B3F7389F38CCEEA54E51AEFD
+:10131000FEEA97487EFC7FF0778CC0983AB38885C8
+:1013200072203DE33E826782C7F53C7EB3E9AF326F
+:101330008DDF1C7F214828AFE3FF08111351DB3CF0
+:101340009BAE574F87A61CC074F21E89FA8F9A0E67
+:10135000B3F56D6CA7DD4F74FE64A21748FF357BB3
+:10136000987FABA68B9D0F9CFFB2BDDEF82E7B7ED7
+:10137000423FFCBB24C0D7AD10149D4E7CEE1E979F
+:10138000B122C0CED3E8BDB2889A79FFD515647674
+:1013900018C1079DFF91A3105942E671A4A1A4169C
+:1013A000EF291DF9809D371CF948A9CFB4BFDA1287
+:1013B00060FCB2C9CDCE8F37CD0E24179379EC9B4C
+:1013C0007DC350DC57FDE3DF6243B5BEEC12A222C1
+:1013D00064BA261AB9300EE5A395DD77834471A669
+:1013E000F793855C083911F2513CDB1FCBE4171DE4
+:1013F0001664FBBFBAD99512C66F773F2BD133A6BF
+:10140000EE2504AE3EF068C29241084FD3EEF7A934
+:101410009FC2BB27B3BFFBD94088CEBF7B89B978B9
+:1014200002C1D7F788709B280FEE4459A6FE4D588D
+:101430004FFD57DB028C9FBBBD6C1F0E6AA218DFED
+:101440008DE8DE3DE9D26504CEBB89FCE1FABDC979
+:1014500015A1709BF380BEFF07FC7E61E965B0F5C6
+:1014600076CB7EED40A0F620D2FB6080C51F15C470
+:101470002212C21DF9F84408FB3FF2A187D2AF84C3
+:10148000FB8B44BB23017E0E17347E43F9654E214E
+:10149000558A915828D23006E0BCDD04DF16FD9D48
+:1014A000A69B49C7C98F01BD479F1F90D97918D9FD
+:1014B000A7E1FEA309C48F49F72B42FEF0D29B6A35
+:1014C00089BB97F648A920D19FD5DE400AFD32F9A5
+:1014D00073647C8387D8A35ED65FA7DD6E450D8CD1
+:1014E000FA177500D03CDB1F097D2CF4786B1ED3F6
+:1014F0007FAD6B54AA1F37AB5D3EF44B97197A9DB5
+:101500004AC6CD57751A6F31780E93F79CE1F7E60E
+:10151000F5D84513001EFB58C9E81F392B28F015D4
+:10152000FB07E26BE481A3FBD0BC8AF8A000E93D95
+:1015300085DB3DE3DF65FA48DC3368EAB94760D70D
+:10154000479B7CDC8E81C4EFF1DCFEA9BFAAF4FED0
+:10155000408FFE993D85AEA7A0543D87FC35E157ED
+:101560007C7BC0F50FD9ED51BC9CFF422C8E7038AE
+:10157000F5CD38207A49EA5FEF38E94C8CF09E7C53
+:101580002941CA980344CE2CED9D7A6A6090AFB38E
+:101590005C4F1D8789032FD6D3FC347A61E4398FE1
+:1015A000857F849E4AF35392E2D5398E04DE9EBC39
+:1015B000361CF5CB0B0AFA518ED4B2BFF393E2720C
+:1015C00094F741F252E487F57B2EF121DFEF3C30B6
+:1015D000C98B62755398DD3B53F74E3781B38FF556
+:1015E0005CD9055E3D5089F890291E148DE42DE3E9
+:1015F0001F4B48FCDEA59E3B3DC3FBD822BD29CC3A
+:10160000EE95ED3C302C97ED475394EE3D7CCFFDAD
+:1016100017422E04BF3BF95BC8439CB4922D7684DD
+:101620002275F0FDA3DD8F10E776445CBC3F6316A6
+:1016300053FB7001B70FE381112BF1CF1CB4A6EA65
+:10164000343CF758101C46E3AB170C60F873E243C8
+:10165000A44D1F127BD11207DFA41EA5FEB1A60F59
+:10166000DDB6EF02BFD9F022F07B01E257FAE4F8D1
+:101670003D3FC8E8ECC4F3A79D7FE94DE332DEE7C8
+:10168000FB5799FF04883DDD45FDB1EC3E89E0370D
+:10169000A13F6A6E6E8BE7E8697D21EE8308BD236A
+:1016A000F4CBF98D89E77232E80FA7DE88B8B4EF82
+:1016B000AE22F88BFC2C40DFEB70EA910FF09762C2
+:1016C000EA77BB2748E07DECF9B765F49B3CF15322
+:1016D0003277521ED93B99F9053B4FEDBC4BD8AD43
+:1016E000C25E75D613F6AA5877C479D3AF83B18793
+:1016F000707C693791A710C6C7B27DF28140EC11AA
+:10170000FC9E4360F6632C6065AA8CED67EDF29A4F
+:101710004D3E731CF2D79152D93B3201F62E9413F1
+:101720000E317E4390BF2B40B80EED9AD21A6083E3
+:10173000CD67EF06948E8418AECF78BD14E7F92BF1
+:101740006E97BDC0D71B911E0844F723FC2E154C85
+:10175000CFE84F0EB7F02FFE3A68ECC3FEBCF5069B
+:101760009DC7200D2268EF0F523BA4088123BF5173
+:10177000977A9C3D625D27FD0D9AAAD7A21C0DC2E7
+:101780003B05581FEDA30CF4F97390C535CDF376E6
+:101790003D8F267CD3D4E6FA501FE7EBE9F7102201
+:1017A000DCCF658F0339F2CC4B83F1FCF3B51FBC62
+:1017B0001FC473ADFF548F0611CE3717FD3E88F757
+:1017C000215E5BC4F61FD738EC9CE31C7FD343D16A
+:1017D000C341927EA7E5E31ADB3B240BD9F9CCF594
+:1017E000490537A53DFC3E777B0EF5ED89FCBC8EA7
+:1017F000025B5EF0E93C0F8BDB72CEBF2AC4E2686D
+:10180000AEDFB1D53D48C7F163FF85E3BFC9EDB891
+:10181000377705A9FF43C0336BC72837E2E13FF7AD
+:1018200078F8B97FA78BE1DF988AE773314E0A27F2
+:101830009CCF3F9B43FBBB768342ED8E9964AC8586
+:1018400084BF637BAEA7FB70E73CAE7D4D9F3290BB
+:10185000D0EFDA1512B557B1FE22C20FB185CBE930
+:10186000399E739E334D47FC08B72B9C7126D7EDEC
+:1018700061E7EF0DA0AF9C589621EE64CFA5F4DC94
+:10188000EDBA7EF63D65216E4FD4C0F918377F1C46
+:10189000AA7E58A5F7BFEF79B3056810D9DB2D5E96
+:1018A0009A1E6ED158CAF5E7DCDD7B9FA77CA67631
+:1018B000D6A0DCEF3CF07ACEB7F4B41EFFF2D6F738
+:1018C0009FBB87E4C700F3F3087FFBD51CEF1771BC
+:1018D0007D7E1DB717C67CD8B73EBF1AF131B2372F
+:1018E000BC428F5F8D7F6FD08207A1D79DF838767D
+:1018F00060780EF2C7E490F3BCF9D3E1255BBB79C5
+:101900004AE67846214787838CAF1BDA2F5F564221
+:10191000C68F3FF3C6902EA6270EA29E107C0AD03B
+:10192000EC463976F2A3E0931EBEDBB39AE249F0AF
+:101930000791AB303FE70CE3FED0C97FFDC537759B
+:10194000BBBA86A05E70F259B7E35EB448AF083107
+:10195000FF7B836E4CC1FD2A596E96B1F340A68F72
+:10196000DE5413CFDF86F2DACEE465DE938FFC041B
+:10197000F5D00D3FDE10423DF4969A28C2F11AB719
+:101980002D0DE1B9FA9BAA19C2F66F25958CF18F3E
+:101990003B4292784FC31627016DE66528C7FFD8F2
+:1019A000E6D2F01CAC69BB879DBBEF6278237976E9
+:1019B000DEBE2B739CC40D0F6C28D259DCAD3D5E8E
+:1019C000A2DD45FD17E85FC361B29D17F79C3F7725
+:1019D000F47D9EDEB48BC7D9ECBA3463BC84884BEB
+:1019E00070F2F16607FF12FC50BF9F49E0A2EE764D
+:1019F0007E4E1E7FF0AE9187087C87DB7F1592AA12
+:101A0000ACFE78761E7FACE3BB3FF2CAD9F9B79B38
+:101A1000F37BDA9E48668C9F6874A542B8AF6ADC97
+:101A2000EAA2FBC0C64714FA5E1DFCD143D7F3B946
+:101A30008FFCEC0F1710F8E63EE62A9CCAA641E39D
+:101A40002404BD7AE258387D6E78FC67EC7C59E757
+:101A5000F12C9C4E731FDBEBC6B81C273E2775ECA0
+:101A6000757739E22028BD3A0E4DA1F7091F3CE1F8
+:101A7000C675F6AD67251858D6BBFD9CAD3F0BA1CA
+:101A8000BE403CD138004EB7EC714BA9CB7E5A4DCD
+:101A9000EB51BF5D7F745C84B23896F2FBA33F25A7
+:101AA00070CC79C543E3A7E63C7A338D337A436D36
+:101AB000667C7FEFD2225C7FE7B8CC228DA6ECFB60
+:101AC0009C2DB7507EBCEEC55B8AF87DA462E6EF24
+:101AD000318B719ED76EFE269DE76C88517E9C737C
+:101AE000AF12453FCB7115EA1FCB2037237299DC2B
+:101AF000BC719F071FD38137B89FD3FC9DC2FF5E87
+:101B0000A4F3BC8ABD1B739CEFBFFF19EA396FF4C5
+:101B10005AF7634DEDCB3B914E6F0F36066A349EFC
+:101B2000403539DEE8FBEBCA8B170FE4FA8DBE7740
+:101B300023ECA049F81DEB77BAE8BB379676B67769
+:101B40006B16F0F109DC7EE93C921665F6837E3374
+:101B5000571271F02CFE46F059363DD0CEE2593E78
+:101B600038C8F40CC6E5D0F24E576AA02D1EC763E4
+:101B70007B17251D67E2E2726E2F2770D278991EBF
+:101B8000FC3E2B25F11D64C12FB3D77BECF1793DD1
+:101B9000FCE37CB7C71E3F739DC32E1369AFF53FAF
+:101BA000D7715EB7F9D4E2671A5D491AFFD4F847D6
+:101BB0000FDD9F343EE28A225EDED9F1DC1FBE4596
+:101BC000F8FE9D0E21C776BDEB94E3393BC7422654
+:101BD000397E2710818C724CBE6794E340FA5C43D7
+:101BE0008733AF77AFCBA277BFEAC027B11B723183
+:101BF0008EF8ED87E60EA5FE0A077E85BE75EAD152
+:101C0000D7433AC573EF783FB6EEA7E331191E0507
+:101C10007FDEF0F03C3A4E0F1F0B3E157C9C256E8C
+:101C2000CC894F67792EFACEC6F6F68B9875508917
+:101C30007FA729EE06F6DE9BEC8F20FFF677DEF914
+:101C4000DBDC32F1FEDB796C5FC8CE3B23010DFF9C
+:101C50006205DE9753329DB34726C919EDFF1FE495
+:101C6000323B09DDB2983E99CBF0D7AA44B923AFF5
+:101C700083DE63A067AB08675E88CA998BC7A990AB
+:101C80009EE97DF4488EFCBE4EFAB8FB87FB2F51CF
+:101C9000D13F3B46BE7938C9EFFCE1CB97A884DE43
+:101CA0009109F2E3C3487ED70FFFC8CACF93C7B8E4
+:101CB00008AB6E375FB96432C9CFE7F39E2FFC24BF
+:101CC000AD636D7E12553E74279EE7A83F657F8FFA
+:101CD0006825917BEFE8F439738E074C1FC9E7B88C
+:101CE000494AF2CBCA7EBF0C3791BFF2C736E652E3
+:101CF0007CD5E988E7C39A97C6EF2C78EA621A4741
+:101D0000FA642EF3479FFBF804FA771DCF201C0FCF
+:101D1000E60EC80E47AB8BF57378E7B99310CFE7A3
+:101D20000E459F5A9A1EA3559D7EF711B49BCCEE8B
+:101D30000FE3FD96789E9BF6F324E7B3534D45DC05
+:101D40008B92C3F842C9959B1F23E9B39C1FFE7772
+:101D5000AE26D621BAEF3EF2CCC0FBD8BB314787C6
+:101D600020BD15E5D89FD1DE3CFAED1CFA774B5E1D
+:101D7000F133BCBDE26778BB327795EB1CF27DB4E2
+:101D800077C8CDC8F4AF483B6EC174AB16FB25A332
+:101D900007A4B0DF6F5DA3B07E03CD417C374E3228
+:101DA000981D2E1166BA9AE0236E80EE1E8E226C6C
+:101DB0008FFF5094D1475374FCA06D7C2825EB26EF
+:101DC00091F32BC7337A11DCD275F4A5712C2FE077
+:101DD0009B911C16EFD2293C7F4278467992837101
+:101DE0003FF52D625631BEB7EFEBBBFDEC7CB31B6C
+:101DF000DB8F4CC70F34FD4DA6FBD9269C03C93F92
+:101E00007E18F8DF2B64EFEB08BFC7F85FDF44FDF7
+:101E1000DFD5BBE7B23813EEEF12E7F935FBD9F99E
+:101E20009CD3BF350156517D3ADEA14727ECFE2AEF
+:101E3000D5AFFD9DCFFD43E8D5122839CDF3B98F3D
+:101E4000734FE17CEEBF013359118B00800000001D
+:101E50001F8B080000000000000BB55A0974545590
+:101E60009AFE5FBDDA92AA54AA2A450804E34B02FF
+:101E700024210B45122004D42220D0314A8016811F
+:101E8000F64881B298AD98B4DB699D438520D2DADB
+:101E9000A319756CCE69BAE785D61125E92924D135
+:101EA000E05432C52204254E9045A01D3BED74231D
+:101EB000DA64313D824BF761FEFFDEFBA82541E984
+:101EC0003E67C8E1DCBAEFDD77DF7FBFFFFBB77BA2
+:101ED000DFBA4409600CD03F1D2403D49BF1970264
+:101EE000307C3C2311F200F47A00D9096054642854
+:101EF000C1F62AFDBB0DA06D338E3385FB6F252AFD
+:101F00006C9EFC53F6FBC1462DAC86828879ED7C35
+:101F1000DEDB652B4031CE7F1154533AC0B4BEECAA
+:101F20009FCFC1BEA1DB002ABD979EA0FB6775AA0B
+:101F30001F459B71ECD74521BCB435CE560053F1FB
+:101F400095293A50CC6C5EB88AFFE3947850B2C3BE
+:101F50007D4BB633AA2FC7DB764122FEF07B7A5346
+:101F6000508E227E0B12DCE3A3E679DBB6A89BE45D
+:101F70002EB2AFAF20B9134B32A2E681E3FA4FFA8B
+:101F8000B09F8D7F573300A643656208E52F844AD2
+:101F90008F84F2BA3F027708E59F718A8FD39E73D0
+:101FA00087FCB217712CF928FA7A2944F4719EC77C
+:101FB0003EFAC27138429EE9F604D7050BFE180FAF
+:101FC000E3AFCAA3E2E80E114EA76437AA01EA8F75
+:101FD000E12017B69F810A88DB3428480486AB0CC1
+:101FE0002AF6DF04EF0B73B0BDB279C871785218CE
+:101FF0004F87271ACFA445D1788EA98CC673EC8A57
+:1020000068DCC679A3714ADD3825EAFE4D9B0AA338
+:10201000FA373F561A353EDD5F16D5CFDC5E1E35EA
+:102020007E52D3D2A87ED68E5551E373D4B551F7E4
+:10203000737757DD90FEF303F551E362F53FB5E3A7
+:102040002751F396CAF7CA9011E6811FFF880785CA
+:10205000A462D23FEA210423F53FD3E527C6FFCD92
+:10206000FA7F98F49F1BA17FF9DE44AF356C6FB106
+:10207000ADA6D79FD05AC7905E714E14EE0AE919EB
+:10208000AF0D1AACDB256C1DC89D7BF1FA63667E33
+:10209000FD5181CF95B83495D6EF081EFD5AC21672
+:1020A000D5C2ECD0FFB1456D44DE3C2A2B0DC4AB4C
+:1020B00017E54A09509E54549D2E1379A4838D012F
+:1020C000E4F7B33ADDEACA08F99EB373BFF29C5D48
+:1020D000C7DA5F18D156F1BDA916F09B0BD973B4BE
+:1020E00036FAE7015CB72D8981822F2CDF3E7F0E07
+:1020F000DE77F4652B0E0033F56F01381FCFE53D19
+:102100001FCFE55C65521AFBC87FC8EA2492A7D9A5
+:10211000EEDD69C7F79C979E30E09BC1E0F21BC8DB
+:10212000EE52CDE0B7E1FB1A0DB0BA12FB0E7049CA
+:10213000F5D826C24E3BE18B622857911487AA72CC
+:1021400013FBF0FAFB24D138B231B70E6600ACD4E1
+:10215000FCE1C61CE60F87718DBDA450BD9208D866
+:102160000E3F90C9AE9FBB0FAD10EDE99C91E3A16E
+:10217000E17051F8C9CF379B597B69B33DCA6F6E87
+:102180006C7E2141C179CE65C3A240047E5D84DFAF
+:10219000746A6586DF80FAC764826770DDB7934929
+:1021A000689FD4BBCD8A439EDAF10F95807A30B612
+:1021B0002DF1A34E60A55161E3B5797CC1B94038DA
+:1021C0001063E9FA3D1FC22692EF9E6FB18D785FD2
+:1021D0008FDDC0DED743EFC376393676C46D39EA7A
+:1021E000C541EDD1390BC82EF07A48C2FEE26E30FF
+:1021F000903D2CF1A61B489E93E03EDD8EF29CB5EF
+:102200002BECF91F42A581E43A735F6D028DBB365A
+:102210009F360F0AEBC078F2A1C36F4846BF3574F2
+:102220008BE4DEA5B0F799E97AE5BDA94F5A95F0A0
+:10223000FBCE80B7FF34EA7B29B8D9BCDAFC6879D9
+:10224000517EF18D8DD5BF4BCA207FA80333F9C3D2
+:102250004E13F3878355575A5FC2FBAB53FB6E3265
+:10226000E273E7ABBE9D4CB8ACDC218382FAFF245D
+:10227000C1FB07FBF4301EE71EF87302DD5F6552F9
+:102280005F7909ED00F698DCAF003DB7873DA78D7B
+:102290001BB0CFFD8C78072508D4ACEBDBA786FFFD
+:1022A000BCD773C612CF347E3D28F855FF5AD65896
+:1022B000E2537DC2357EF1FE2B9963895F3324CED4
+:1022C000CBD879BB905F4A16AE1B79A520AFBABEBA
+:1022D0002A4B223FB1EFB8B388E4D483F76AE4BA5B
+:1022E000F6BDBF2A97EEC359D70DC94BB6E947399A
+:1022F000EF012E678FB08F15C1A422D23BDA9DC5A6
+:1023000081E356FDC76BFDBF257C3AF7BCF2388DE3
+:1023100029BE313C34FFB4379EC7231071CE2D70D7
+:10232000C13897AD47510721DE4DF9C2F5FCD65EA5
+:10233000F20BC8AB2B3A747C99E4AF2A81FC82057E
+:10234000DC0AB5E865DE9B8D7A6C3CA083A7B16B97
+:1023500023A7A6F99F12ECCB3AEE7FB06F4EC1389F
+:1023600022FCD324C7BF2EDACAECC7635D3383B91E
+:10237000442657F1E1AA0A7A2FF4A21F47592BF1FC
+:102380008FE2C16CD874280EE59CB103F3031C37AF
+:10239000F32CBFAFF9F55921DD1A63228DFBD91754
+:1023A000B28D208A8E03B30F977F4AF3CE8688E7DB
+:1023B00046890FB31C7F5F7C98EFE0FE2190CDFD36
+:1023C0007B2014AFFAD3D9B44595F9C817278F1FCE
+:1023D0002D8839D9B1511AC836A31F5EE468DEBE14
+:1023E0007D02D26122C785FA8DF45B29623CBE96DC
+:1023F000371E9EC2FC21FC05A522BCEC42E61879E2
+:102400008AD1EE78307647E59DA123DFD8FA701D9A
+:10241000AD4EE5BF485F4398D7905F88D3F7191D4D
+:10242000A3ACEF4DF2AFC8FFE71C3A26AFB943F2B9
+:10243000A8F87EB3E20109D71067B74F93A5F0F86B
+:1024400032078F4BB547CEA719515FFDBAE3B63CB3
+:102450009CBFA6FD0D1B2E1F7E6CF3AE73E03CD51A
+:10246000E73E9841A10B199E569940386524923D4C
+:10247000E5EBC1AF2F1C29876F072E06295FB72315
+:1024800089B5391D125B9F2FC4D739D0D1E88CF4A0
+:102490001BD79EFBCFCEF1A4B73D636005F9E3FCEB
+:1024A00060D106E231C962405DBCFE552E9BEF094A
+:1024B000473ACFAFF5A0A7EB00AA6E290EDA63C0AA
+:1024C000E770DE81AF64364E9B37BF63AE6C471E4C
+:1024D000E5859A0E525E18173429A4E7B89781E370
+:1024E000128C637ED1D7B510287F1D74805BC2FB30
+:1024F000ADF1431F132F863A4DCA2E89F06B022788
+:10250000CEDF6AE4F133070DE10D6BF8BAF6BEB821
+:10251000E0CF81FC15F2C3A3D27D7D13DC628DC4B4
+:102520003D81C9FF4B07E7576B7C486725BF8F9CF0
+:10253000DCC5E40ACB09ECBD9A9C39AC0E68350EBB
+:102540005D78DCC5E4B2131F7280CB09C12CE515A0
+:102550007ADEEE61EB88B32B6EBF34522E5F01E65C
+:10256000C56877CF6E816B764E76EF8B0FF7CD68AF
+:1025700013AD1920FCC229968784FBE8B04AC2CF6C
+:10258000BFF1CF67B66F9DC3EA23BF8C7CB0609B61
+:10259000E0A47572FBC2B2C933A690E3E0469C2C5E
+:1025A000667EFFDA78E4BB95FA563ECE9D68B79416
+:1025B0004BCC6E80ECA64EF89987A4D085DB50B545
+:1025C0005F860E1628284BCDD1B7196FAB75C19712
+:1025D000F2F17E59BC3748FEF7AD8F7460C3F57FCA
+:1025E000FE5A9C5A817864EF6F4EF65847CEF7D466
+:1025F000D92DCFA792BEF74B0A228D79E1501AC987
+:102600005717FCD4E8C17661C7EF8D149F5639BDCA
+:1026100047C80E4A3A1AE6117EB3A0A9D16E657E6C
+:10262000D14B3C0DA470FF317C6AF2AE8608BC2F02
+:102630003978DE0243DE9BC96E82C23EBB28FFC1F1
+:10264000B65DE461ED0756662AF9E1E7FC703015E6
+:1026500070CE2D70389570D6AE0FAAFA45C4A7DC9F
+:1026600033E6D59E08BE5D10F67E41BCEF1F9DDEB1
+:102670008F0887EA039F186DB82EDF1F0269149F29
+:102680000298A7D9BFC32FFA62ECC6A71F32D2782F
+:10269000DF45607E04F5BA3511F5B4E74CC79435D3
+:1026A00056263F24E2BADBCF9998DF6C4FE7F6D786
+:1026B00070FA7201F9ADCB9DD537135EEF3B0C1A62
+:1026C000CFCBE2C99EF602F3639A3DE6913DA2E8C4
+:1026D00079C4F362EAE7B0F95A8DBDE5CCFEDA754C
+:1026E00040F6873C67BC479EDB29FFC8B323EFD980
+:1026F000F359CC9E5B7B31E061DF8F7E7C12EB97E0
+:102700002DA37E6BEF7C3BB3671D425B4876193A85
+:10271000C8E609604C23D549501999A796396C4CE5
+:102720005ECD3F563AB8FF0F642B896E5C8F45969D
+:10273000A3EC20225EF2BE88A72B9F37FCF4C509CC
+:10274000644D222E88BCAC4BE4C1E02D62FEFEC776
+:102750002296D5BF53BAB805D75BDF2373FF2F7816
+:102760007250E4C98737A7B03EC50B05F5341D5B31
+:102770000FFAD3199E4DF3D0C6A06451D3216A4BF2
+:102780002B03F3107198B3A2F790819B732EF1AFD6
+:10279000EDE00F72F5C4F77326884311DBBE19FA1A
+:1027A000F875C4E1912EC47F94B884CB61FC4304D6
+:1027B000181FAFC79B41A9EFAED96E4CF99F1FFB05
+:1027C000037D1CDA0F1103F1C87B7ECC4FFD28502E
+:1027D000BBD333D58938FE36C93BD589380E9EF830
+:1027E00026997C7AFBA94F6CE4EFDB8C9E5CE25966
+:1027F0005B06D60BA3F0738293F3A7D8149DA76B47
+:10280000ED5227E7FF643F3C43FCA96B93ED2AEAB6
+:10281000BBBF4DF618318FBAE0F126EB11D28BE039
+:102820005F3E9BE2BBA87FD771D8611DE52F18677B
+:10283000D6BF6888AA4B6BC4BE4616F46D4B459C48
+:102840007C2F4BACAEDD18938FD450FE5240F54533
+:10285000B391D653F572CC3C94C714D0B8EFAE7395
+:10286000973AC53E472664521E833C62F5F4D06910
+:10287000D9BD8B62A01EBA4DC8DF3D3A8E13FA4D0A
+:10288000668F5A3E637279E691DDCFD3E28AA85B08
+:10289000875A2595D9CF6EF4F3D82FBDA83403C736
+:1028A000E154CA0C5A0FE765A99E8F2F0DA633FB82
+:1028B0002BF1603D8FEB5E8FF5BC4AEBD6F23CD539
+:1028C000C0D68FE197E579B3406DB4E1B80DBB2573
+:1028D000B6EF53BDDB1095E7F9043E353B4E1CA126
+:1028E00072B23610735FE0E38BC1E70DFA316B24EF
+:1028F0004E8F3A45BE97066991F91E743B47AD0B62
+:10290000347CB43CFB4F069E5F7C20E6D7C6FD8B33
+:1029100093D7E7751E60FB4735AAACAA3C1FB4AE3F
+:1029200041BEDC2FF872BFE08B0FF8B8DADD921AE7
+:10293000A278F533AE7733FE112EEB026B16A42A84
+:1029400023795525F0D8D86260F92FC02623D9E71E
+:10295000C69D31E3042E5531B8D479A518F9783ED7
+:10296000FEB7CA576DE0FB35D5C82FBFF2FF276F02
+:10297000ACFEFE5DD3DF149812A5BF454937A4BF56
+:10298000D83C79EF9129167A7EB83B83ED4368BC39
+:10299000899D6781C8B317EEE0F9687FC73C4B3E5D
+:1029A000D553C7F56E09E729EAF95F5B3EE251D8D6
+:1029B0002943054E31182C7AC68FEBDCD73D71992F
+:1029C00082F1A1B047CFE24B514FA14A754D614F03
+:1029D000A1253381194F12D50B380F8BCF83C72711
+:1029E0009ECC233FDB3DBF98606F385E68A13C62A0
+:1029F0001FF07D0DA9A738A92F22DE743BF9BEC6B2
+:102A0000B694FF7996F2FC857B0D6ECA47161A863E
+:102A1000DE9FEDA2F7EBDD0DD8AFE959BB258EF4B3
+:102A2000FE9AE4A674FC486FBDEB47A4DFA0C16E1C
+:102A300062F23E7C90EEFB5B24F7241CEFEBBC3D86
+:102A4000B715FB85CD456E82597B5FA14379A18285
+:102A5000F2C5711656C72FBCC9C0E2EEA5F1965F4C
+:102A600053BE54E5695E40FEF8D2DBFB8CE40F06F2
+:102A70005B2548C1851C4939F41B3FAEF3D29B2727
+:102A80008C9494CF6B3B61ECFB8E7CA25F9521C450
+:102A9000EAF72623D541B5CD5ABFCF487AAA14F913
+:102AA00055DDCBBF67FD2AAA13F07D553B6555C1A7
+:102AB0009F873ADF3212DE752D128C4D8FB8FFB230
+:102AC000C4EE6BBC5F0B9C076B857FAA16FB90D591
+:102AD000B40F89D7613BF7371AEF1FD8BDE40885DB
+:102AE000EF754DD17EE841C1F30D5497B2FADB6B1F
+:102AF00024BD6ED811334EF0FCC1EFE1B93549F871
+:102B0000F31CC8219E5F9ECBE3C9E513F1963C5CA4
+:102B1000D7E563B21BE03BF9CEE2EF71912F0C8752
+:102B2000742C9E69E3063AFECCE28DEFF8B091F288
+:102B3000DB05C12F983E2A8207E613DE7782B7862F
+:102B4000F0BB3368B193FD57F4717F501E34A9B4C4
+:102B50000F7E2704B6929E07BB5EDDEA24DEFC1BD7
+:102B6000E70D087FB741E0BA41E0BA011D7E12BA15
+:102B7000D8AABC032F61BA0FE5C0FD507940F8A177
+:102B80009DD13863E4B98FF4551734C1D378FF0E63
+:102B9000E18FEE68E1FE28364ED6897D80C171B99D
+:102BA0008BD97E2BD6BB94C7D5B444E35F27F605FB
+:102BB000EA62E2F0CD497CDFEEFBEAFF583DCD8DC5
+:102BC000D153C510E74F39C53D5C7F77684B1EED8B
+:102BD000DB6978C5EAA95BC94C1CAD9ED5DAF7451F
+:102BE000DEAFF517237129DF0CD89BAC9175FCABD8
+:102BF000493CFE54CD92FDA4E76BF5CEC443058A53
+:102C00002E5CEF609DB332690CAF7BA6E1D4472701
+:102C1000C8E07285EB9DA7525EA828A47CA585FB21
+:102C20009181129C2F91F27960FECBD76252A94E0E
+:102C3000F1217F589D43BCC1B63228DD4EBCC1FA9C
+:102C4000611DCDBF84B68E1187251D3CEF5932FF23
+:102C50000BC6B76313F97A87F5CAD8D1EA09AD8EE6
+:102C6000A8FB8AE7A9DAF53AB47B1A5F1794585D96
+:102C7000DC76F0EBB474F49F839D57D2D660FBA250
+:102C800058BF96A70E619E9A21F214CA9FD77395DA
+:102C9000C1064C871F431EAE17710EA4ADCC4EEA81
+:102CA00028D925BEB54B7C1F673F5E9889FEF78308
+:102CB0007896C70C9CE1E743F4FC1398470DAC0DE4
+:102CC0001C76E2F8CBAD128B7FEB31C7BDB570A49B
+:102CD000BDD70A5E36C01651976D656D79F6DE4F29
+:102CE0001E277FD46256C8BF0E74341AD9FEB21A9A
+:102CF000F17CC6C87CA856F0B7F67BF6B55E4D12DF
+:102D00007152F012D7C1F2DBC163B2DD2431FC7E17
+:102D1000353E122791FFB41D8C637A1E3C61552904
+:102D2000CFFF5CF0EF92D8776F2891192EBA59BC7B
+:102D3000CDED7A2B83F44A7AF0D23E4AD75B533CEE
+:102D40006C9F4F65F654BD5BA6C3BEB0FC010BDBA8
+:102D50000BD5FA1ABE3E812FCA35D9E80ACBD5AEBB
+:102D6000EFB3B947B11B493AC8F4A693A2EB5CDFB5
+:102D70007EB9528DB0275CCF6AF26FFB053F403FB2
+:102D8000944C7EB9334961F23504B99E759DBCC53A
+:102D9000F72FE7FB3606F6FE11F7CBFC3574FF7212
+:102DA000BA05184FBEF25750FF910C99F9A9473E4A
+:102DB000A8CA8288F783C4EB719F612899D5C3277D
+:102DC000744C3EDF89E1E48956F283CDF3ED79E47A
+:102DD000DFB87F389261D948FCF6D37BC786E759C4
+:102DE00098C4E33CD07A53289B7991CF2BD6BB056E
+:102DF00096321CB6089E75897C14EBA633648FB19D
+:102E000075D3F5F2DD88FA8D3D7F79AE72F247C851
+:102E100083C2637A3FD5EBFBCE723FD1D0B9E17765
+:102E20005407FBCE9B80FCC4235D1BB2280E83D7C6
+:102E30003B95F2BBCB5D0F4E65FB97D21626979F55
+:102E4000E44BA1BCE97432E543B59DA793595C6F8F
+:102E50009FFE02E5499817DD41D7315F61FC2BECFD
+:102E60002966FCDB77BC3829930407B785E6AD3DBE
+:102E7000A6AF247C6A8F15BF5741F94B4F19CB93EE
+:102E8000B4BCA888EA71CA938E4D8CCA93FA057EA9
+:102E90008307E2D8FE8704199C3F30318A3F356DA5
+:102EA000EFB07CA2A643F644F2E8DA732E3DE38D40
+:102EB000C1A5B0F91A029287F1632F6F6B3AF6B190
+:102EC000F5551B024CDF0D2D067EBF95B7004DEC6E
+:102ED000793F38FD84C77B7409F5506E5427D0FEC6
+:102EE000FABBE9BCBE88D5C77617DF4F78F79CF7E9
+:102EF00066E2CBBB73BD59F651E2861FCA78DD2D61
+:102F000009BCDB0C2CAF8C1DB7CDC5F77B6C491011
+:102F100075DEA8B5F52ECE9F7223DFA78ABD7FABE5
+:102F20008BD7CDF8EF191DF2E26485C1FEB4A82756
+:102F3000C6A1BFBD4BF8DB65771A58DE71529C33D2
+:102F4000DDA5F9DD121EBFB5FDFE253BE1492CFFD5
+:102F5000E14BC863E7604B3CD17EEF6E915F2D5B28
+:102F600014735DE453777F4F3E35C325FCE16498CD
+:102F7000CCEB06AB85F645BFEC36D86526B73AB143
+:102F8000327FE43A357F73449C0F75A31FA4B621AA
+:102F9000E743B64FF5EE8173BF71303F1A07197CD6
+:102FA000DF91EDD7D75E67BFBEE19A9DFE308A778D
+:102FB0009A9EFA29CFCF1BA9A7A502EF5AF3252382
+:102FC0003BB7844DDB7572F89CD264F07A52711D68
+:102FD000868EB9213ABF6CC831B17CA9FF764925EC
+:102FE0007F8F72A69922FC7DFF389E7F3DB25C6286
+:102FF000FBC207723E6471BC36D46B245E4D6E5BBF
+:10300000F324B35F3F9CA27A49D3E762338F9FD703
+:10301000F4A8AD976E2AB43EA79FFB65176B693C79
+:10302000C5CBBB447C5C5C12ADBF2CE85D40FB2390
+:10303000F77824962F5D4FEF4B574C7B87DCDF8D65
+:10304000EAFF9F5CDE875D64EFBDC3CB697FF7DD80
+:103050009C4FD328BED65D87CF7E81AFCFC2CFC570
+:103060007C167E1EE6CE521AFB101FBDC3BBD9458F
+:10307000FB4FBABFD8A600CDD3F7AB7A89F4030CC7
+:10308000FFEBD9D13631EF36979DDB8B8B9F0FC588
+:10309000519FECD9A04E203F01793776CED7B0FFB3
+:1030A0006801E969E0C0B10263843E2FD5A33FA067
+:1030B000F8D2792859B146F24D27F8A667AD242DEC
+:1030C0001571339A7F97887FA4FFBD87EEA2BAB0AF
+:1030D000BF6D994B5222E26AFB49DBA48879FB83DE
+:1030E000321B8FF5D8E4BB1322E57C92C9D91FE0CF
+:1030F000F301F44D5E961F79BF919F1B99FB188FCA
+:103100009FCADEC4CEDD351EEB81F3B8AE6309B0D5
+:103110003825D61D30E20FAA33BA4C2A9D53D07EF3
+:10312000BB23C24E8E0A9C67627140FC9C057E994F
+:10313000E69D8933DE4B7D3D84E84C6E3684647EAB
+:10314000DE3D0188D73304AF67EA4307A402368E19
+:103150009D4B95422F1B772B0CB1D603763DB56561
+:10316000E0666D89397407B993BC40807D97144A35
+:10317000D63B2E98D951298CA6BFF0FAF57041E3C1
+:10318000290EC6A487EDE3C78E1B1676EFA6DA825A
+:10319000F4DC0F6C1FEE16E893E925B3F5B088BE9A
+:1031A00027BB450FE6789477EF611DB3E7AE3E4548
+:1031B000257FE64E12CF7D86CF617FA687DB2D85EA
+:1031C00020FA6E455B6F2C0EA5381FED0BCED46335
+:1031D000E5CB700CB1F7DD4682E3BAE782A2A7FE29
+:1031E0001F5DE9623F85D769F3449DA633FB191E35
+:1031F0007F12F191CE736C384F69930467E97C2696
+:1032000093AF579BBF14B3C1C4421ACFE31B6D8564
+:103210009F75F2731E1B3B9F9B6F27BCA450B2EEA1
+:10322000AAE5C6711D4C0626B7EDFEA181C78BC36A
+:10323000E75DEEE0D1B3F45D8EE4F1B0EF7ADC66E9
+:103240006B88F27364C7A5C8BCFBAA6BED5FC9DECF
+:1032500025C5CEF0022F28947F8C0D7FEF02579367
+:10326000C2DFD3108C1793C3E7FBDAF735BBD5A5C4
+:103270008A0EF5B2C26576935E0ACD6945540F3663
+:10328000DBBD7F75B1EF6C5A26B1C9F4EAF4CA848C
+:1032900030DF2DE02921BCB5737D49E8EF7AE7F6F0
+:1032A00064ABC4730BBA7DFA2EE819B417B373B4C8
+:1032B000EF8FF8793E5AA142DF1DC113F314FA2EA5
+:1032C000609BC3EC7E5AA2141FD76709AFAFD1CC65
+:1032D000BF276834F3EF0260EB74B67FF690388F47
+:1032E00068B4EAB2A9DE6A84783795F49ABC0F25EF
+:1032F000703E3EF4DF16763E1A2BF7D7F1DE9C3196
+:10330000D3C3F23F2ABBCF62EE1385E71C0D4F5D9E
+:1033100018CF156A46639FC2F09B46CF4F33A9373B
+:10332000D1BEC82A13FF7E49C30D15CA486D17FACE
+:10333000D0F0B393BE691D1ED4B7C6978C307ECF34
+:10334000C473DC0CF4E544267B56217F1D8BCBFF38
+:1033500001AF6B7F8EF0290000000000000000002C
+:103360001F8B080000000000000BFBCACFC0F0A3B9
+:103370001E8143D1F8E8389D0F534C941182D7B386
+:10338000E0D78B0D5B3122D8FEDC0C0CCA9C0C0CF8
+:103390002A40DC07C4FD40FC1E880DB818180C81BB
+:1033A000380DC84E07627B2076E386E86966676061
+:1033B000E806E2C9403C9B9D74FBCD251918CECA96
+:1033C00022F8B2720C0C510AA49B338A87267633FA
+:1033D00042E5C76BA3F2BB7419184E23A949D02646
+:1033E000CD7C466306062663DCF271E6A8FC504BF2
+:1033F00054FE5D3354FE4577080D00AEA32483B818
+:1034000003000000000000001F8B08000000000007
+:10341000000BC57D0D7C54C5B5F8DCBB77EF6EF6AF
+:103420002B9B0FC20642721302040CB8C480C14A1F
+:10343000BB89A0A0C85B502B585F5D02242004828A
+:103440005A492BFE73212104126041D4A0881B3EEF
+:10345000142BD8A0A0B6B576F9D0529FCF4645A57B
+:10346000ADA50115D4024DB5C8F63D7DFCE79C998C
+:103470009BBDF76637E0EBFBBF7FFAABC3DC993B44
+:1034800077E67C9F33676665318564E6117211FECD
+:10349000BE47C8040B21644CBC244155206309F984
+:1034A000919DE09FD6CF5C36D61312B511129B4B7F
+:1034B00048A78B76946AEDA49896B7DE28922C42A2
+:1034C00052E17D859026A1F6C8E05242D44122D92E
+:1034D000491FADCA999E1A72251F77371FF7B97A0F
+:1034E0003B961DF55E2C9FAFF761B9AF5E21D161B0
+:1034F00084BC585F84E5CBF57E7CFE8BFA322C5F72
+:10350000A90F60F96AFD242CA3F5412C0FD6CFC07A
+:10351000F2707D08DF7BBD7E1E9647EA6BF1F91BDA
+:10352000F57558BE59AFE2F3B7EA9BB1ECAC0F6347
+:10353000F94E7D1B9647EB23D8EFFDFA5D581EAB85
+:10354000EFC0E77FA87F19CB0FEBA358DE4ED20860
+:10355000E947C86DB79DB7CFA2EB1DF6C47DEF4C10
+:10356000CE2464FD18D10FE01AF6C4C7BE50717C9A
+:10357000DDEBBFB1CCE8480097EF1301C759EF2648
+:10358000D8BEFEC0EF893292907563BA7C2AAD4FE7
+:10359000E6DF19BEF3A87D5671BC9F799C4F8885E4
+:1035A0008D63A5EDB4DFD0CDACBFD63E19BE3326BA
+:1035B000DEFE54DB3BF6D92E7D3B7BFFE92DEFD8B9
+:1035C000017F6B63128922DE554268E950BADBFA4B
+:1035D000513CA71CB3115B3EC5BFD241BAE838EBE2
+:1035E000C63D12154B61DDB49B02EB7C9708140EAF
+:1035F000AA9B203D2830C6D5F1EF5C4D449CC7B056
+:10360000278EB2EFDC7A1ECB57FF211342DF5B77A8
+:103610009B1071D2F1D78DFFC217007A539FB10072
+:10362000BD21B92AF09F2E5F908EBD7EFCFB3E959A
+:10363000C269ED37EFCE980DF4379AF8E17B6B0F46
+:10364000FC9C28D03EB21BE1D7C0D7BD76E6AC3C8F
+:103650006F7172BAA49444C432BA5C17094412C0A0
+:10366000F75F0108143E166F04D7E4A0FD12E1E1F4
+:103670005F898CFDD6BA83EF015CD4DBACFE9D7410
+:10368000DED7F9A3E4942B3E6FA87F44EBAEBF478F
+:1036900089C50DF3FECC67A1EB7796C957A5D0D9A4
+:1036A000B8BABB8FC1FBAE6BAB02B0F675A3BB7CE7
+:1036B00055B4BFBDA813D74BFCC43F848EEB285232
+:1036C000C9EC62808305F16A9ECF6C80773FC0D3DE
+:1036D000573EC0894687EFDDFAAEBD52D7FF698DF0
+:1036E0003E04465FA4356A9FE68EB73FA1B5A7307A
+:1036F000FA217663FB66131D939C24ED560A68C479
+:103700009718D92920DCEDD347F69E776BF4B7C81C
+:10371000072E7FD41E4AB02ECA2776903BA9A5A2B9
+:103720001FE0B56E3CE597E2F83A2FC577CD1C2E29
+:103730006B4BA7BB61FC4BC9AD911D2289167199DA
+:1037400049FF7FE5CB0E3AF3787D7434DD50BFEA54
+:10375000C80043FF319D0586F6AB8F8D30B48FEBEB
+:103760002A31D4BFF3E93586FEE3BB2B0CF5EFC558
+:103770006E34F42F27B718EAD7D97F60E83FD13BE2
+:10378000DBD07E836F81A17DB272AFA17E53D10366
+:1037900086FE37FB1B0CEDFF52D662689F1678C879
+:1037A00050BF65D2E386FEB705B71BDA6F9FF1AC59
+:1037B000A17D66E80543BDC6113A0EF8F9C1BC5FAC
+:1037C0001ADEFBD7DA4386FA7B844C4A845F2230C8
+:1037D000394329C87BEA0ADE9F8A382FD01CD07172
+:1037E0003F46A745ED49E4246F7F66C73BF6B9061F
+:1037F000396965749CCDDA7745DE49FCFE20CE2719
+:10380000A4D33EDDAD6F67F3BAE21F54BE42BBA442
+:103810007E2BF9EAF6FAB1BF2657297D13720D8582
+:10382000AF3A5055F17B743C2A2F2D6CC9A48E30D1
+:103830003945C8BDF85CD3FB2487442D74DC06777A
+:103840004EFB1A80091D5BCA847AF136A88B4A8028
+:10385000742580ABC52B1BF064862F71A55362EED7
+:103860004BCEAA083F75222992E0FB82C3BF9CAED3
+:103870005722A101027D7E410CF960F24B2DEA6FC7
+:1038800042F9F1FECBC7D37F42FF13426405F657DE
+:10389000108E0D234900F4869A2D4776E6233C6D61
+:1038A000204FB4F7E803A58BCD57BD38D85067F348
+:1038B000BD64FDEB61C6BA36EE4F8CF0A47086FA9B
+:1038C0005DBCD26BDD7E394EB716E8C7EA8A289018
+:1038D0008B28078DEDDA772EA4784691548A473BE2
+:1038E0002B973A3CDBA0BC90921B211E428AC5500C
+:1038F00005C04DAD60F0518F3B230D385EEDD5C155
+:103900009100DFC4F602212B187F7C3859D4AF23F5
+:1039100019DE1AC06E1BA6A3831C3FCA71BA6AD4F3
+:103920006FE6FEB70B321BDF455145C7B711466343
+:10393000A996D0EDC218586D9048384F3F0922BE65
+:103940002611B04BED1A3CC373B1EEE276E601F7F7
+:10395000D863218AE7B501D90F63550A0AC783DF07
+:10396000077AC056269235B4B65679C70EFCD19C5C
+:103970002F67835CB749B5C44BEBB642CA0709F45D
+:10398000C8E21E39F120B91CBBD88CA722FA3A9B99
+:103990000741386AF30F0FEAB417005D8EA776313E
+:1039A0009DEAFA6BFBD62F2B397C5BC02EA6E53A3D
+:1039B000657A2A41BE253381BE9BF3B344E4530E9E
+:1039C000A71EB8E4BF6F073E5DCDDF5FEB7F07ED5D
+:1039D000F4D59A1E37C1B179F44984CF2C81E9E33B
+:1039E00096918E19910470992578B0BD19782A1393
+:1039F000ED2BC65F267AA12DBE4ADA6E57BC256B29
+:103A0000E8F813464A33812EDC6544B121FF065C99
+:103A1000D9F4FB0EDE5B524483FC706732BAB57F8B
+:103A2000284414DADFE563DFB3B9482480EF2F318F
+:103A3000E0C551169A4246513BE91F167C8FCE9144
+:103A4000D9114727233F5ABD6C9DA488E1C94BFF7C
+:103A500077B1808EA7C806BDB1BC5CF647E9779602
+:103A60007A5C484F563D5EE9779DDFBC1084F15784
+:103A7000E5DCE3584EC7BF50DEB40AD8D2F2E1E429
+:103A8000CF80EF2CE6FE83A6FF6E70023ED04A6721
+:103A90009787443360803BFBA403CF87ED6F1CD630
+:103AA000CDF315C19D89F2F56A7235CA854BBC7F8D
+:103AB000A13EF2C6E121080FF172E879A589AF9B1A
+:103AC000F235BDA5FAA6E9ECB2F302D36B442D475B
+:103AD000384B9C9F9BC6936EB05BD7E5CBCA0ADA86
+:103AE000452A93A3403AF0D74DBF0FB6190179ADDF
+:103AF0003475B2E73F32C8CDD5FDA7FAA37DC04DDE
+:103B00002A34E99B4BACBF0EE0A7EBFF31C0CF19C5
+:103B1000879F8D0453A3402FE149063F7655F9FD59
+:103B20004A94FE73D580470227880E8EDFA37CA8B7
+:103B3000E30F5B4E84E8BFAFC9C55BC44037C861C3
+:103B40008BEC4739450A64F447CCF32B1299BC89B6
+:103B5000C3D92E111D7F902911843BFD0BDAB33898
+:103B6000FCE85F8AEFF57F00FCA88E8E3A47E1F310
+:103B700046A984CE2793A8CE2BE9FB1291A03E48FC
+:103B8000CC47BEA5ED13E474E0DFEBFD20079BB846
+:103B9000DF47BCED3EBD5D3E4864788DB7477CB7DE
+:103BA00019DA99BDD3A4D9F5DEED06BAE8793F8DCF
+:103BB00024F43FFA89CCCE1E247A39FD6C47FF6D80
+:103BC00075E69418A02125FB7A7F25F0AB97201C81
+:103BD000343DA1E905AA2F0689FDE2E3C98541220A
+:103BE00060BB51FF2695D726BD9B52649403446F5A
+:103BF000CF14C07F73BC482FC4ACEF7919BCF1B2AD
+:103C0000F8AA97BE2489FDC5692293C344CDC4F5A3
+:103C10006B7C45B83D61D5E882307AF5F0EFCA306B
+:103C20009FC180E7080EEEA46E15D4DDA416EBE765
+:103C3000CB4AA200279BD4D54CB87E54F313F8513D
+:103C40003C0E936C1DEBC727D60FE5A207F16971F7
+:103C5000D59210D2F19D68070A6A885C447B30CC0B
+:103C6000F5AADF07785C555F473EA28B711C9C8CE0
+:103C7000FEB9941308807F6F0122C8A6FF7795B222
+:103C800052F22B7AFAECC123598EE3592958609DE0
+:103C900056977D16E801ABCB3B0DCBA211730528DF
+:103CA00053AFAF1391AD12D393361EA5AB79228CCF
+:103CB0009719427E96BC412C892B13ED57DA5F0988
+:103CC000269C07A703DE2F29DDF5D08D0607458644
+:103CD000F1CCF4E428A51E8988D54E986F7F8EED2F
+:103CE000FE739A960088DD24DC3C94E2AD7FD7AC6D
+:103CF00029A077DCA07FE83A5716971C01932FD5AF
+:103D0000EFDD70BD02710022001E56C360D7C0787F
+:103D10003F585E8EF10FFA37800A8B15C172E61F8D
+:103D2000044C76ABA8489A7D26F669EF08176DBD5E
+:103D3000DF4FB67E1BD1F115EAF17B2ECFBEBA93D1
+:103D40007D4FA5FF037E4C33E9D9D480511FB84D78
+:103D5000DF790E6089F05EF2BFF23D2FD96857C05F
+:103D60005E2914BD114ACBA9C49B067E946302F55B
+:103D7000EF68DD9BD3ADC2942E859795DC8F25949B
+:103D80009FF5F47F88CBD7ECAA4DB39AE8B8E74B00
+:103D90005D7EA0E7FE549C66A4F75E4F4B3D31F07C
+:103DA000734BF136A4EB06AAF00AC03F2816D15E89
+:103DB0005F5DF8BC57AFC73ED1E4502FFA208A347C
+:103DC00096FB93143E9642319032EA9FA70FB3FDC3
+:103DD00074B9F4E1BCD3888F6F8BAF2FBE257DFC07
+:103DE000B3DF5B992C3EC1E559765523F35794BE5A
+:103DF000FD83DE78DD88787550BF26917CBED08348
+:103E00004FB57769D02BC6B880F586EFCFD8D107EC
+:103E10003CAC33CCFE3F1B37A5CEA27C0CF6ADE408
+:103E200035F841AB958D2AD8F3E7C12E07FB305CFE
+:103E30008EF16152C8E2B5308048EB294A20C2FCBD
+:103E40009B08D1EB4139C71877B3643A8CFA7B866B
+:103E50002AE8E79F5227E33CECF0BD4C8CE746E0B4
+:103E6000BB162F89A6A0FDC9F0079F62F180072E1F
+:103E70008B0E347A053398D1ABF1BD553925241119
+:103E8000FE7A7DEF56E37C93CA25F37B2E4939A554
+:103E9000B35392BF2791533A7BA742DBF7E178A255
+:103EA00076DECB422A9507BEEF9310856F133465FB
+:103EB000433C94A03E6BF29578519FEF124C7EBB31
+:103EC000C2E84749C7FEA29DE94DAD9E7C3EECBBD2
+:103ED000F17D2405FDDA64FD1BEACB1E9628713ABC
+:103EE000EB0E6D92281E1B97076604D1BF3DB249A9
+:103EF0001A12EF5763D1FC76AA3EC7C6F7072442D1
+:103F0000FB21DC4472F12A78E825CA588026FBB3ED
+:103F1000934E6CA74F391E89D0E3CFD021DB609D33
+:103F2000189F3886FD60A08B186FEA6275FA22D45C
+:103F30005BAC8100CE4B0ADBEFA1F06A49E17585ED
+:103F4000D7D378DDCBEBF9BC4EF505D49D32ADD39C
+:103F500032C51AF662DDC1EBF9BC9ECEEB69BC5EE0
+:103F6000C0EBC246ACB7C86CBC3552848DEFE0756F
+:103F700085D7D379DDCBEB05BC4EB6B1EFDB58DD91
+:103F8000618DB0F19DBC9ECFEB19BC9EC6EB8379D1
+:103F90005DD886F564F8731452F81BE44367BC8E51
+:103FA0004A84C3B5A7DE656A67F49221106E87A9BB
+:103FB000D960B71D98757F36C4431F3D71B50FE8B2
+:103FC000A7E1668D9EFC283F49CE4D28C7FA737F36
+:103FD000AEE1CE1518876808C98C89787C26DE5E2C
+:103FE0007204F4F6F919A21F1ADB92F82FCF723B74
+:103FF000FE191E97799AEF57EEE4FB95DBF97E6583
+:104000003BDFAF7C92EF573EC1F72B1FE7FB959B41
+:10401000F97EE526D8AFA4FD36F0FDCAF57CBF7267
+:104020002DDFAF6C81FDCA6140EF7558AEE2FB95A4
+:104030002BF97E6503DFAF7CE4CE92DF16D2F59DCF
+:104040007789680F24C347F16EA3FC1CB1C3283FD6
+:104050008BB6A41BEA43370D30C8F7C256E3BE4502
+:1040600041E308435D595662A8E7DE778D61BC9C49
+:1040700085C67D8B01736E34D4FB05A71BFAA74F51
+:10408000B8C350F75E5B69A87B4AEF36D45DC5F7CD
+:1040900018C67314FEC450B7E7AC30F47FDC52800E
+:1040A000F42567AE31F4935C1B0DFD6A1C81CF2DA6
+:1040B00020EFA6645E967C237F57B3F4F2D2AC1F48
+:1040C0002CB92410403DC7F411C66821AE3688C50E
+:1040D000AFEC1FDE7004FC175B21D353E6789579B3
+:1040E0003CD9F5D431957EA7DC73C4D7A5A35BE298
+:1040F000D3BD47979A2A3139B9E64146DFAD0F263D
+:10410000A673D404741DADDF248E17BB258B418F9D
+:10411000687E4DEB8302F6FF67C7D7DACDE3C6BFF3
+:1041200047713D566FB744F87CA88ED0D90BD6AEF8
+:10413000B4D904F53CF3972D9CDFCB27F84F3452CC
+:1041400078AFF412BF8DD657BA2A02CC2E1115942F
+:104150000FCB6E46BF5EEBAFCDABD1359DC917A27D
+:104160008B5BA29C7218E20A2B33FBB6DFE4980546
+:10417000E37F969840A2542FC95270523EE55FF9F2
+:10418000A8C5BF9CA07E4A181F206423DB77F619C0
+:10419000E3A68D734CF28FE7655835F9965981CFB8
+:1041A0001BBD7DCFCB06F382F9F07959634E2C2DE0
+:1041B000B1149CEFB85806D6CB6269585E1D1B88B7
+:1041C000E5D8583696636283B12C8DE5637955EC5A
+:1041D0000A7CAF24361CCBD1B1ABF0B93F361ACB39
+:1041E0002B63DFC1E7A362E3B01C19BB0E9F17C7A7
+:1041F000CAB1BC2276133E1F119B8CE5F0D82DF876
+:10420000BC28360DCB61B11F6039343613CB21B1D8
+:10421000D95816C666613938B600DF2B88CDC7324B
+:104220003F762F3E57624BB0CC8B3D80656EECC71E
+:10423000580E8A356099135B8EE5C0580BBE372047
+:10424000B61ACBECD843F8DC17DB8065566C339696
+:1042500069B1EDD8EE8DB563991A7B169F7B62CF5D
+:1042600060E98EBD80CF5DB1BD583A63BFC4E78EB3
+:10427000D8CFB14C891DC2E7F6D8012C2F85A74BAA
+:10428000D9C1651F1BF79FC77E68DC7F2E3D6A94EE
+:10429000E3256F1AF79FFD878DFBCFA35E31EE3FBD
+:1042A00017EF33CAF111BB8DFBCF453B8C727CE815
+:1042B000963B8C7A6493518E17B4DE6DD4238D4671
+:1042C000399EBBEC27463D72DF0AA31E59B8C6D003
+:1042D000EE9B6394DF59E431A39F3E619B518F5C59
+:1042E000FB53C378AED2E74D7E4D04E58BA3F817A0
+:1042F00086F7EC85074D725965F2C9146F0790C0B7
+:10430000FEE652E2F0835F63C6673A970719C0770B
+:10431000B4CCE47CD70FF88E96E9372DF4013D64D8
+:104320004C2D9B0576CC85138202B132616ADD305B
+:10433000D8EF491F48583C818CB80EE2684DD95AD5
+:104340009DA8026D6F1A4430BE40D4E5150117C612
+:104350009BB1FE5BE9C10AC88B69B2F276B292B535
+:10436000A7B0FAB1C6392BA03D3DB5231B12991E4B
+:10437000B72696E75D12DBDF1B28057E27D1F5FF08
+:10438000B5BCEB7E88CBFDBB3DF4AE449F2FB4871C
+:10439000F2606BEDAC35F434A88E02217014FA8D06
+:1043A0001402EF4928B78D71D629A038E9F37C298A
+:1043B000F807E89731D527C0FA353834B9FB9ECFD6
+:1043C0005B5C3F35A511F437D5D57C3F18FE34BD75
+:1043D00041F5E1A34E0FCAFDC86A799B8DD9854688
+:1043E000FDA166CDC6786273D312D4C7805F4BA29D
+:1043F000386B17D653C1BA1C0C7181EE5C89968B51
+:104400006CD126D0275FA5751E172C088FF3B09EA0
+:10441000FB6F0C61FF15CEA965B01E0A8FAF383C4B
+:104420002EF4050FFA17F4D1F9F934AADA2D18E2AF
+:104430009AA9969060EDC7F653617C5FC88F7ED9CC
+:104440001F25166FD7E047FFEE4BD7E23804DF4B4E
+:10445000B18EE93D9E368E000003BAE67A51A3EB99
+:10446000BA247A4A8B7713F5E66FB5EF7444E67E8B
+:104470009CE93B16C98FFBB6E6F72497510E5A5DAF
+:1044800021CC8790A5C4FBBBB28DEF5B6D997A59A7
+:10449000FBDC3BB47534DE7C59FDDBB5FED43184E6
+:1044A000FE391C8E64CBCD4877055C1FE770FBEEB0
+:1044B000D09F6E58D14AF939429FD912C41122CDEA
+:1044C00022EE6BE6D45082CB8FC37BA0C2EC42EDD0
+:1044D000BB036B8D7198031A1C375D1EFCB5FCCEB7
+:1044E0001C4AF8BF28E93D0FB2632A5B8F9755A598
+:1044F0000D417B0A9D5701A3253290BA23FA38A0BB
+:10450000793E84EF5F0CE4C30D74B1FE649771DCF7
+:104510005EDFB5BC32BA2F3DD8EB3BDF723FB0CA8D
+:104520009A783F95E20BF13DD064FF69A5B61FA8CC
+:10453000D50FFDA9DA0E7677D3C24ADC6F6FF23160
+:10454000FD4DBEA6A38E8DAFDB3CCE4E0EF7EDDC4F
+:104550009FDCB9A902F31FC96E237D0E79F8564777
+:1045600088D96FE9503ED5C6FA0DDD3C873FAFC410
+:10457000E7DB5BD9F3C16B4BF9F3127CBE23CC9E16
+:10458000176E98E080784EA3B7221DE33A75F44F7A
+:1045900027EF86784322C4E386B491003C1BECF5F8
+:1045A0008B20FF0BBD012CB5790FDAB4AD7C38ED53
+:1045B0003F6861703AE4B952C2C4FC430221153A23
+:1045C000EFC7F87A73B5F690B1BD8D7F2FAFAD729E
+:1045D000F970FACFBC85A18D934BF1997F0889F7CB
+:1045E0007B848F63D7DA03C6F6306F575A4FA21811
+:1045F0005016FADF9904FD9A8DDF5BC7FBB928B32B
+:10460000C1BC0B16061CC3615E45ACDF131ADF9AF2
+:10461000E482146E249375DF6BE5F3B62C64715657
+:104620004D3E6CE37180AD10071816EFBF46EB6F7F
+:10463000DFFEC4C7548F4B0B593EA9D6DECCE7A58D
+:10464000E5E514DC678CDFFEC2CAF8B85B66F15B97
+:104650008DAE92D13799271AFC3D127218EB337444
+:104660007621D403038CED6505C676FF0863BDA8EB
+:10467000C45857AE31D42FF4C4613A53F471182D95
+:10468000A6F384B712FD9078FCAF3B459F479ECBC5
+:10469000F9EDC9BA12ECD7E0E27C64CAA769522AE4
+:1046A000ECFA7DF8BD9C8FF6413C84962F40FE3697
+:1046B0002DF78F0ED8F341BFBF67F16F23C9E1B665
+:1046C00095E3710BE7C3C7009FB46CE3F87C84C724
+:1046D00075D6F3B8CE5A1ED76981B80EC667585C36
+:1046E00067158FEBFC8CE7A1EFE1719D67795CE7C3
+:1046F000191ED7799AE7A1EFE479E8DB795CA79DE9
+:10470000C7752672F9BD7F624736C4D91E9F98D8F7
+:104710004F9E28337D168480262DAF224A8315E8CC
+:104720009AC206F6754AEA148B0DF262030CAE25A6
+:10473000F3148BCCF271F06F3AFF0EE815CC9F7931
+:1047400093E7F5E450AB4847EFA30F4709E47564DE
+:104750004DF08E8690682AA747DAE6837E5C0D903E
+:10476000ACC35E307388640978E57E303EC17EF963
+:10477000BBC307C19C1911ADAD70D2F78B5E0E564D
+:10478000504F9B0C2DF21F1414C8170A8880E7FDA8
+:10479000E5FE234A691C5F741606BAA073447D9631
+:1047A000A7E9876B8D7471556C2BDACB4D753C5F27
+:1047B0004A2109FD78ADF45E2B9AE249463FAA6989
+:1047C0009931DFC35C8ED861F4C38BB698DE57FA9B
+:1047D0007E7FE826D1145F33E61137B9A6F7191F9B
+:1047E000CF8F4DEDD35FBCC552799D3C265E77C619
+:1047F000BE8BFDCDF6A004761EB557A5A37200ECC6
+:104800005DE9A837007113E9A8C24B3F7F1EE0F5B0
+:1048100020D6A9DD1884F1295E0C76A3850A7CD800
+:104820001BD90FC21DFD908B2B02D418DA7F1B41C0
+:10483000BF224D765EA7827114988BF891397E3233
+:10484000E4DAA7210E12A911C9365A7F7C61DFF282
+:10485000AE575E852B80FB4939B5DE124B1FFCBE7F
+:10486000A9569C94689F6C31A7EB95B5D3BDA83F22
+:104870000E5F326F60B1ACCB1BE8772BCF1B38C318
+:10488000F2E20669EBBABF6F3A78D4B48EFE49EC17
+:10489000EAE735BE73B1BC138DEE330AFAA6935521
+:1048A0005C3EC62222E904792B05507EF6BB358496
+:1048B000F9F1A0A0F57CD2F4CD75C887EA83EC1C91
+:1048C0004FBF5B03449F77AFCD63504E17B875A4BD
+:1048D000E9C03896C741E10FFBD74D0708FF8E8A24
+:1048E000C2C17E1FA980EFD9492DB1437CB3CEAFA1
+:1048F000C2738B8BC10BFC55DE1FE7D5BC4CC49437
+:104900008A86092C3EAAC97F8D4E1A7C3C5E3F41A7
+:10491000C278B7E4AD8D02DE9B46133C6F43EDAE2B
+:104920008B1735FF06F2BC323BF1DFD6A26814E8E4
+:1049300092042621FCB4FCC026775639ECD3ABF3A5
+:1049400035FB82E7A14A7E3CB790D3368AC5C33295
+:10495000C3985771BF187A4EEEA7A7BB0E844F536A
+:1049600092F3056B6596F7E44B82D7F7B91CCE90AE
+:10497000A393993F4AE93F419CA093F7DBD23CFDCA
+:104980007743499C7FB5F63F4A0AB66BF59C988CF5
+:10499000F3266DDFCE0FB85EF3F74CFE9B550A1A77
+:1049A000FCB05CAB82FDB4BA9C699467973F4F89B9
+:1049B000E54316DF68C073C680BEF9A689F3CD85CE
+:1049C0004126BBA3B088ED1BF7D81D22F150B86E6D
+:1049D00035D193A647AC45DE0DC3F27BD3C5D66572
+:1049E00095AA00FB2A7E82FB426E7F4700F6055D9A
+:1049F000399172B08F291DFC15E840A38B9CB6B18C
+:104A000008EF1735BD57472A0209E6AFD975E06FA1
+:104A1000F9D2616493DF43825EF0AF7296331B720A
+:104A2000208F2B0C54FBF6FB2E77FF5ADB4FCEA5C5
+:104A30007FE0F7FC42C3F7A7A6B89597B2EC589D64
+:104A40007EFF3443B0E8E8B2C7CF37BD47FD0B6FF8
+:104A500022B92D594259361DBD98FD77B39F4D7A25
+:104A6000E5BD9512C89BB24C997404F21F7BFCED16
+:104A70002D5399FCE278B3727FB4B73F79A7BF2F6B
+:104A80007D627599F659BEA53FE9B719F34B2F3BE7
+:104A90003FF75BC6231A789E5E2FBFC3348E180E75
+:104AA0008889CE6D0C091BE12EB98C76C79556C648
+:104AB0009F839B8D71E4BCBA0189E39D3C5FADB2DD
+:104AC0004CC39372FB1F29BFCD3F62653E10F78335
+:104AD000B578D37C9E375D09796C144F7348D00349
+:104AE0008D678988F93167C93B9EAB747C536563D8
+:104AF000E7E848B3F5249CBFD0F2B3E686595D9B46
+:104B00004F759BB15E45A66741DCB56A9395403E03
+:104B1000D67C229DECD2E64FF9FDFB366607559315
+:104B2000DA26906B2B793CB1D24B24C8A7AA79E93D
+:104B300089B1709EA7C6C6E4F7E714FE8A2EEFE699
+:104B40006E574406FEFE68DF55DFFF0E81F7234DEA
+:104B500003406FA6253E0731BBD938BF4BCDDF3CA4
+:104B60005FED9C46B27948BB8484E7151FD0E25EB6
+:104B700097798E64BB8DE13FD939924BBDBF0BDE77
+:104B8000EFE31CCAA5DEDFF34FBEFFFC25E65F6343
+:104B9000EFBE1EE4C4AACCDA20C8552D9F651109CA
+:104BA0000520566379659A3A50D1F5F35D66BF1CCE
+:104BB000DACF7219FD0AFB1EEF1CD7C3BFD9BD5D4A
+:104BC00006FE3DFBD31353C12E58F04B0BB1533AA5
+:104BD00038B7DBCDCF8B4564D08F77EFB360DC8007
+:104BE00048D1B1B7E8F20531B3908EBFE0676EDC13
+:104BF0005FBEFB795B640A7DFFEE173F1A45281CF8
+:104C0000CEADE87E7D20D83D3F1558FE95DA35EAD9
+:104C100016FAFC6E89DC154CA0B73A391F9CF9B91D
+:104C20007306D099B0EBC00F71DC8EDBAD369D5EA4
+:104C3000F88DCD8AF0A7FDD879AC6784C81081CDF6
+:104C40004F9F2FAEE5BD9D794660F37BD91A498110
+:104C5000F9ED6A9743B4DFE25D7F43BABEEE677B4E
+:104C60003C0087C52F5B0CF267F12E4BD4360ACB84
+:104C7000133694F701973016E049500F2CDA57831A
+:104C800079B28B3A5AFE66F1C0FB46FEA270C17340
+:104C90001F0B3EB0F8A740FD85A73D60C77EDEB97B
+:104CA000D30370A5E3CE92295D7DF7EF3A3E246CE5
+:104CB000FC587AEFF1205203F4B5B86335FBDEBE41
+:104CC0009B4F837C5B6CE2E3CFE11FD9BDF547CC02
+:104CD000668C479E276F8E857D0AB22B23617E717D
+:104CE0008FFEE07CBD60CFF9AD709EF8CCF37FD92C
+:104CF0000A76FDC2FFFA72EB03100F7835C50BF28E
+:104D000068F14FDFF3101DFC33ECCC8E3FF7CCD3B2
+:104D10004F3D46F9E4DCEF6D68E79CFBD5E95C8527
+:104D2000AEFFDCDE7F64C1B9DBFB7E35B13FC0E3A3
+:104D3000BEFDD7F5EFCBCF00BA8DD8F4F88D207E2D
+:104D400095970596CCFC0A2F4D783AB4EF502ECCAF
+:104D5000F3EC311B9EBF594C9FD59500DE6A503F46
+:104D6000407D1985F7A2DDABFE66199508EEEA4095
+:104D7000113745A203C1C85EB4EF967F195F0AA53B
+:104D8000D5AFC078A41BE5BBF9BDC547297EAF4CA4
+:104D90008ECFF3E46B19E0BF78F76AF6DD0E8A4F29
+:104DA0004F6F7C9E857F8CEB8DCF12BB199F0B9F25
+:104DB000C4D8E8BE8C8479241A3E6BF6DFD6A7DD12
+:104DC000A0C9874BC1791ECF9BFA2F5BA0C20E7C76
+:104DD000F6BC53F5313C47A6D0B6737BCEE7124AFA
+:104DE000279F5ABB7F0872B2FB57362FF81D77FFFB
+:104DF000EA03E4BB73FBDF961576FEC42550BBE2E5
+:104E00001CE9F9EB043B6311DF335BBCC31DB579CF
+:104E1000E2F85A14993649F1E0F313F83CC2F8610C
+:104E200051E4C0AD4202FC2DB31730FD14E9877088
+:104E3000A9A19E0E9CCFD7E35528037C9EB81EE8FF
+:104E40002F193EB5F57B61FD57EBF0BA83F1B1B98F
+:104E5000FF22CAAF20877BE137227C00E5B9769B31
+:104E600004F991E7AC2CFE66C67B1CFEFCFCE4B7A3
+:104E7000B417EFB727D97FE070B814BF5F6A7DDF42
+:104E8000167E73EC0A8E6B86E399AF13EB838D5C11
+:104E90007E2C22B59306E8F499CD4AF5593ED87B8D
+:104EA0004175A0109F6F538705E5FC995D9608E852
+:104EB0000BB3BC584412EFDB45ECCC7E59F4F281C5
+:104EC0005120D7CE1CFC39A74B46F78B769F9055C7
+:104ED000AE1F227AFD90C4DFFE291F6FF12B89C718
+:104EE0005BBCFB6F09C7FB5C0ADC0EF3FFBCD34A5B
+:104EF000543AC4E71D964989ECAD4D76AB31CFD617
+:104F00003DF6582A7DCFE27128B0EE8615810F5408
+:104F1000B04BDEB1629C9648FE4F6D78DEDAA1ACF4
+:104F2000A1706BF054613C451BAFD10427C91744F5
+:104F3000BF54CA0C96329B3A62F0A7ADD4DFD5CFEE
+:104F40009BEADD1CD04BC7479FB6C23AFF6CB21F2D
+:104F5000FF2C91A6FE74BC3FAB827FB992C85F3430
+:104F60008E1F5A66218A5E1FDABA8FC37CC8AF5380
+:104F700008E4AF595E4D51419E2CDE9A12817DCDE1
+:104F800043FB2F3C05703BF7A48DEF73B23CDB6A0B
+:104F9000BEEF777AFF85ADFF49DB4FC3CBF4FBD57E
+:104FA0005B697FB0DB773B315FF3AFCFA78E2254D5
+:104FB0004E57FFFA81A9205FAAC1C7A2FDAB7FD6D9
+:104FC0003FD240C73BD58FD54FED191401BC2C7C87
+:104FD000E1578B409F2C78CE4980240FEDFFE0876E
+:104FE000503FF76B37E67B9DFBF5E9EF021F507BE7
+:104FF0005BD1EBF5F9FAF3DE74DC055067EDC245E1
+:105000002EEBC08F590025A5F7052FA7E2F9075D04
+:105010003F7C6FB1ADFB7E1688520788E8134507C9
+:10502000001F2ED865FCDE5FEDCC9E5A2C7757B161
+:10503000FEE1018C5F3BF1BDAF353AE5EDE6F7B53A
+:10504000FEFF612F308DC3DE5F6423B589E8DF96F4
+:10505000C2C65DB0EB9B61C6F118BDF6FE0E7BFECD
+:105060002381E5E793BD29B84FB0508E0E4D2FC672
+:1050700078C73CE0DB859EE8D034FABD5F7279B931
+:10508000D041EBF4F9003E0FE80F7562EF7A0EF0B5
+:105090005BF3520A017AAFF9B51BE3C9352F5E38CD
+:1050A000F5387D7E66BF13E37A35BF5E8AF8AEB110
+:1050B000457F08F1BDEEBD36B28DF63FB3F7B7B907
+:1050C000608F9CB14673D3FB880FD574D87832B803
+:1050D000711DD42F28AAA5F35137B0BC9C3AC2EE5B
+:1050E0001DA883A00ED0F18729EC1C31DF97BA8769
+:1050F000C7A3BE98A3A4E2FCAFBD893DE7F1867BC0
+:105100006E56FAA7E9E6017973E42AEA97C8B5C3AF
+:1051100040CE5A62371105F6FF6283B1D4FA59E0E6
+:10512000FE8662C8DF62FB7ED64C3FA9A6E5D2743C
+:1051300012C2F397AE1B7BF8EC7714C5F76C56FAE6
+:10514000C378FE14265F6A1C81F129980F69BC7729
+:1051500041DDCFD67581DFA7609EEF05AB6A03798D
+:105160001EDFAF6379837592F201C47DC9112E975A
+:105170007AAD9FF1D917DE74E4336D1D2DF55E9481
+:1051800027ABEB7D58AEAA2F220AE629FBB16EE1D0
+:10519000F0B015AB04EE99001E843F9B2B1880FBEA
+:1051A0002C604C88B75B5C21A42F9BAF16630576FF
+:1051B0007EFF8EC5A5926A17C467189C206E0C707E
+:1051C00092795D6A9B8270A5EFE3F3898ED09C94FF
+:1051D0003190EF3BC220A7E4CC1243BD17DC34BAB8
+:1051E000D8F3BF0D3F82F05A5D6FC772557D19C26B
+:1051F0006D657D00EBFF1FE0D7CAE0770D5174FCB1
+:1052000023675618EA49E1B799C22F33CE5766385B
+:10521000D4F1FC1C8D9F92F1EF23F504375F36D655
+:10522000B761A93D4F4FA2D7CFA6307BA48E8496FD
+:10523000E33EA897C56148A64A7274F127E253F18C
+:105240001C089E3785F69C9B307EA9E1D7E2954EDF
+:1052500019E59FF201AC67E91B5611E495A56E3B79
+:10526000F92843C7C75382290AC2D98F71E006AE15
+:105270005F57F6E0D3C81F2DF50A966B399FACE750
+:105280007CB201F00EF13DBF88386D9D44507F3EE9
+:105290004CEBCCDF8F127D3C3CCDDF11B552FCA333
+:1052A0004C52B064F7701CB34586D0F79CC52400FF
+:1052B000F49276ECC7115C2BE9C0F3D669DA3D3085
+:1052C000AF14A4CDC4FD1F62657A8A585819B682FE
+:1052D0001F65866F83FF20DE2F916C3EE5C7E70BCD
+:1052E000F0BD0B33D99E59E69D1DC7E03E0857AB74
+:1052F00013FDCA2C7F6D5E2ECA571BD2ABCB1F127B
+:10530000AA7578CC4A62FF2D734CFE23D0E38790B8
+:105310009748F1BBB16D700AC0B9C5DAE10379D81D
+:1053200092C6F48D3283424177BFD86B5C4E7A4A85
+:105330008D724093CBDE6B4B0CF4ACC9DDF40946A7
+:10534000BAD7E4EECF7AE46EF02CC8DD8CD816E440
+:105350004B331F34586555B812EFA361F1A7130200
+:10536000DB57EF2D0F70DFFD8BAEFC6D701E5BE326
+:105370001FF3FAA5E6C9F89D1E7BD09A381F60205E
+:10538000BF97A199D21BA174D44AE90C10B18ED257
+:105390001994614A678C9FCAB0D4E8780561324499
+:1053A000DD27B279F278ADB67FB2C25E12003CAEB4
+:1053B000EC603C34C8C1F7493345CC0B90A83FE9B9
+:1053C000A28FA403E3EC605F4A56B68FDFED163B75
+:1053D000601F7FA56BBA1DF24A85B452A49FAFDC53
+:1053E00095797DEDEBC0FD6B407F5E979F9C2C8E89
+:1053F0009F9BB4784B08F8A57B5C9D98DFE472888E
+:1054000086FDA71A47A8C0A1AB8F84AF73BCC3B0F9
+:105410007B929CBF1CC5D743725452A893133DF78F
+:1054200025292A29D2C98B1543AEC7FB987ACB8987
+:1054300024F270E7FF8C3C6CC88B205EAD66F9935C
+:1054400019C03BA068A9C2D50AD43A5FF983D148F4
+:10545000A7D739C00F716DEBB183BE57D07B9E6665
+:10546000F917D76B0AC6C1A85E7BB40CE46952BDBC
+:10547000567B17D271EB4005E8F8C0BA079E84FA54
+:1054800047EB6C78EF4B556C3551E87CAB63E3B080
+:105490009CD7F61096956DED94890859BEB67ADDC5
+:1054A0004CE8BFD982F19F5391ABCED5D1FAA95622
+:1054B0001BDAEFA7B6DC9B07F6DFA956A762017BD4
+:1054C0007FCB18637B33BBFFE5549B356261F47B74
+:1054D000D102FB1184CB778802E9E64B4A15B4E38D
+:1054E000BF30EDB754AEB705044F72F857B625B6C6
+:1054F00027F1FC36E45C93DA61205FCB8FFF380F35
+:10550000E84393334BD3A9DC03F81DB79144FB0266
+:10551000131D1317039E263A024B19BE2EEFDEAC65
+:105520008F446A77239E429E6986B82F8BAB7EC4D8
+:10553000ED72624FD2EEE1EF7B13B7D7B4FEE5F523
+:1055400007696D55B131AE6D8178B500FEF83496BE
+:10555000EFA0ED03F5A66B664FB7DA50AECCE1F1E4
+:10556000288DCEE37416F2F07C31031DCE8F6D4092
+:10557000B927B48C7C741C85DF9794FE803E84969A
+:10558000F1FD01BECBD77C67FD9D74FCBFBF69C137
+:10559000E7F36229D8FFB307FD8FDE09FEC2BF5BC8
+:1055A00009C89FBF1F9988FBC89F598D718C7227AE
+:1055B0009397AF72FEAF8AB518ECF3AAE6D932C45E
+:1055C00041AB62EBF079156C22611EFD1DAFC10687
+:1055D00070152CFD1A78FFF6892B509F96601CAD34
+:1055E0007AAD2D619EFFAB0EC520AFAABB5A715C90
+:1055F00042EDB3CC2C3E9E4EEE54C732903F8857BE
+:105600002590F75DC5E54FCFFCB6580DF2E7B39492
+:10561000C4719AB71C6C9D55B1EF20DFF55EDF7742
+:10562000F17995F6DD2EC6A7F1F53C3A2ED17AE256
+:10563000EBB816FB7F9696F8FBE7397C4FD5CF2366
+:10564000012ABF2A6DB49F0BBE7F6F5319F8F95B17
+:10565000D2D205DDBAAADB1690806E5DD55B66C935
+:10566000FAFB29E378B8CF8087F36B16231E9639AF
+:105670008227400F54B68C1F15423F7F35C2F92355
+:10568000AB3F17E4F1E9B67B3D89EE913C6FC64F25
+:105690001BC70FB5BB4B75F8D1F0627EFFD49FAA34
+:1056A000BF7A10E4D466B741AE98CB5E78CB4F0C8E
+:1056B000B7544E9FA7A8FE0E21DC94178F015DAF53
+:1056C00075627E5C72F85D41427DC12F89FD4CEDB3
+:1056D0002CBB730C7C97201CAADB181D5C0A6EF196
+:1056E000EF723A284FBC9EF14E8D0EEA884A19F6A9
+:1056F000A47C293A7880A8F63ED6D143076DAF95B1
+:1057000017C6E960BC333C7105EDF729D83FC37A71
+:10571000E3FFA4AC7AAE017B678D05F7BD4E3AD4AA
+:10572000AC3B587D34C8E7939EF0D46B4AE3F5F95F
+:105730003B8778F4F73A9E6EA6704800BFF1CE24FE
+:10574000F453A892E2B1FFEFE8E7A324E760263A1A
+:10575000CACB019F249C389EAC959AFCB6A4BA7A19
+:10576000FC5ED0A3275D055F4568EB3A47E86627F6
+:105770006D6F4CBB1FF5FCC99302EAE1E57F5A3A15
+:105780000CE4702FFBB73EF6D8C743306EF9F8C76C
+:1057900056B4A7705C42ED1FD003986F8E7EC04058
+:1057A0008CB324DBCFBD172EFF1D13DFD7D5F66FCB
+:1057B00057D6773E04E313BB4ABCDA797D054A66C7
+:1057C0008FFD07CC43179F97AD21AF1FFC5D810470
+:1057D00081EEAD52A819F20CADBECCD1AA0ECE4BC3
+:1057E0009C2C2F27E5F0E1E67CFA7ECADCDF7921EC
+:1057F000CE67A3DF81D29E237DA18F975B3359DED5
+:105800001729D43D2F8073C8B46E883BD0F9F6E1D8
+:1058100037FF52E8B9670DEF379EA95DF405A0A3E5
+:1058200074F37B2D7F456A64ED695A73236BE771CE
+:10583000D4C5952C4E7A68562AC24F5BD7CC5756A2
+:10584000E17D6B335FC9C6F34C335DC33E0178FE27
+:1058500012126B80EED3987E36D3C5435CFEFCA05B
+:105860005D54AD74BCC3D6EE834EE08B1F09E85780
+:10587000DFF1DE612B90FC1F8E9EB4425ED45D9002
+:105880005844D7338B283233A223F8FE6CD2E1661A
+:10589000F58E7E70FF697C3CEA32C3784BD8FEF30C
+:1058A0001DEF1D9D086A948EB712CABBDE24328C90
+:1058B0003F6B9FD2C48E43F1F15EA1E389F1F17A8F
+:1058C000E027D9111E71F8D8115EBFEF395FA2A28F
+:1058D0007DA1832FDA2B1A7C1B006E147E33536755
+:1058E000DC484625E79799AEA19F9051F1F998E1E0
+:1058F000FB7768A2FCF68433B017F8AFD119781E95
+:10590000F867A1BD3B572AC073602FC2F34596507C
+:105910005E16A5ABB38342C3FAC1BD1E9D89F7795C
+:10592000CD7C7A1CF8E54A28295FC03CF879951FA0
+:10593000F2751EFAF169379E47D9FF412E943596CC
+:10594000AEB5B703BFFD9B05EDCF2FF60DEB33AF23
+:10595000EE388FBBBCE514F9796BB6CEBBB83D779A
+:10596000D73E6704EE41BCABCED2E35F015DDF55AD
+:10597000C7F24F88D439EA56833DD9C8F7437A8FA6
+:1059800003FE82791C6D9D0773075C01FEE593633E
+:1059900064F4230EBCF9C5EFAB69DD31C88E7EC25D
+:1059A000DA344EBFE5CC6F7D322DE01C09F1AF3506
+:1059B000E97E95AE73CD6BA443A4703A38FCFE48E3
+:1059C0004529DC0B2D62EC6C7D6C7BB802DE2B660E
+:1059D000F7CE78B95DBABEF3641BD0E3E96336DC79
+:1059E00077F8CCCDCE11AEB10673C18EFFA45D4E5B
+:1059F00078FFD99FDD12CEB75DE81280CE6793B0F5
+:105A00001DE4C5BECEE9FD613E1E3FF102F99FDEF9
+:105A10006211D9FD685ABC252AB178BF2AB17A80B3
+:105A200097DE14FD7D63AB274DC03C8F39AD6F63AE
+:105A3000329EA734F13D3FA92E365F7767FA64BCEA
+:105A40007773828879D86E7FB700EFE57556C8F80E
+:105A50007E58E8F3FDBC655ECC4385F741CEE75D3B
+:105A6000E6FB3617CBD3DAC0FDEC76ABBF69021D7F
+:105A7000A77D6D9A00F8D0FA292E26574E4FD0E216
+:105A800048618C23E5167A53E01E8BDC00323771B7
+:105A90009786F1BEEF6DD08FC559110EEDC35F8CA7
+:105AA000C23EF61A88AF009EAD8C9ED6AC1530AEC5
+:105AB0004AE13700F4C4270FDB6E8275E4350B5ED4
+:105AC000F0DD699970DE33DC7646E7AD8FA25F08C2
+:105AD000615A183777CBBB382F7792F5AE70B37B0E
+:105AE000F23FB9047D7CE964F726E6D675F2FBF156
+:105AF000A2780F5E18E004F54029BBDF440A28FABB
+:105B0000FC9838FF2CE7744802B0CF56592647203E
+:105B10008E2036B7CF8075CF0EDBC80D747DAD42B9
+:105B20006700F8451D23F2FB9402C7014EEB36F4E3
+:105B3000C73CBC55622017F4B0FA7F64DCA73B1861
+:105B4000F86233DC1FBFB54C46BE381860E70D9FC6
+:105B50005C56D00EFB94EEBA8AB6D974BC88574610
+:105B6000C9D2504ADE1806FB94CB44AF40FB878372
+:105B70005ADEB6D7017431DAF2E5E422D8C7CB1683
+:105B800031A6745A60F736AC5C56E105BCAEF466DB
+:105B90000A7AFFE5764E07C7D383B7BB287C7C0F14
+:105BA0006EF452338EF267C6151047549B65453B21
+:105BB000B70BF73D6470BC64748AD12A0FD65DF3CD
+:105BC000D2E13E5D162F7DE8C6108B73C2DEE85829
+:105BD0008C73F23F1FE23593D7D68C706065D38A01
+:105BE0002AEC0FE364D171324AC5E8583AEEB6B4F4
+:105BF000C0568CDB4DB4239C88D4D506708A4C1CCF
+:105C0000E0877B6D378E1BFA369C5FC938D23D1D0D
+:105C1000F4686490E30FED20A756CA0AF079C6B283
+:105C20005377C2F334FF23F74299D1F8FE0320A73C
+:105C3000D3BAFE568FCF27C986F862C6879F7D03E9
+:105C4000ED1941D910A7FC3A3DF81380CBD6E2708C
+:105C500018EFC5048C66C5D7B16779E724B8EFF8AB
+:105C6000F434D1BF8DB7E3BA3679236B18DC4A41DF
+:105C70002F68705B252A1D5158D7543BD24721E924
+:105C80004479950DBBD983E378C9F870F512C8D76C
+:105C900030CF679D4BE8B97F03EE09045C417E8CF1
+:105CA0009CCDCE15EE2DE9F4813DBF362D717CF2F1
+:105CB0002D377BDF26B238ABB9FD0D37A30710892E
+:105CC0006D252C5F7E24942EA2A64299630F40FE80
+:105CD000F35E51F923D2F9468B02F881FE568ABF52
+:105CE000036F7C8EF1C503E177B17CC65DA4E5DD71
+:105CF00047B3E8FBEB4AD97DC7EBBC8C46AA9B991E
+:105D0000BCA8F675D961DFA4BA9878B7717A533513
+:105D10003843BC8CEBABCA5B195C338B09EEFB429E
+:105D20002C08EE9BCA827E147E99CDCB97201E490B
+:105D3000A73A98F65B07E3027E1A45C2C6EDB22386
+:105D4000FF862DB8EF49F9FD2D886B55B6F6C77D56
+:105D50007F38360CE3A5F3EFA6F3F1DAE938103F0C
+:105D60003CDD6CC17301907E03756519A565A4CFF8
+:105D7000EEF2223AAE52EAF5AED1E84093639435A2
+:105D8000E6507D01709BA3AA4B80FE4EDABD6FC02A
+:105D90003C9C9B6C0AAC7FCEA6979682FDE2F47584
+:105DA00035837CA82E63F34D6FA5CFD1CE51DE8213
+:105DB000FED5AD36857D8FC3AF94D31987C35C3EC6
+:105DC000EFB95BD8BC1D832261A0CFEA6514AED0C9
+:105DD0001662740F21D18B22F2D51158BF5BCDC250
+:105DE00071FBCD30F18589FEB47555F275552E6382
+:105DF000EB229C9FE8B4A2306E65295BE71CC2DEF3
+:105E000017E1391D7F2E5F4FA5FA2296739B6D8691
+:105E1000F1B716EDE884F9E417CB0A9E1321ECBE26
+:105E2000C35CBEAEDC46F6BDDCE217115EA44E37A5
+:105E30005F8CABEAEA94AF4EFF9632165C0A00071D
+:105E4000D8E8B8277F2CE37E4EE126E3BA4EAF1E9A
+:105E5000B6BD95B67FF4B08CFBDE7B45FFF13CF41C
+:105E6000476585C91FFFBB53404ECF6DF4831CDFD0
+:105E700053CEE07FFA6612017A187224980EF01E53
+:105E80007224C4CB5ADC4FA700117AE41E9D1F7503
+:105E9000999A059097B1C1CFCE033950C6EE231F12
+:105EA000A49F379D5F46735605E4436596A557C882
+:105EB00078B5ABA9FDC863D345683FFCD8BDF09D5C
+:105EC0006CA25B0F6D973D83D97996C3B415FAD553
+:105ED0009D7A10F0D1CACFB90E8199A5637918CAFD
+:105EE0000CCADF2DE9304F894C2889CB839D0F8F59
+:105EF0001D0D7205539E4AB08C9292DE7243D77F7D
+:105F000038EFAF0A09FAB93D8AC13FDFF9F0F5C3AE
+:105F1000C18F5F0776622ADCC7E6FD12F27454BFB8
+:105F200088705F678DDA8B697D15B51BC17E595FFF
+:105F3000F4BE087CB76E1FF1037D6404FFCBA6C7D7
+:105F4000E30D6EF6FB3C924C5A80FF0F0E3F350975
+:105F5000F0143940ED4EDABFE237AEC79C600FFD5A
+:105F60009EE5C1B4FFB616F5F7FDB972C2FB78C95C
+:105F700025EC4473FFF421D3319E97B76903DEEF1C
+:105F8000593D49F2DF407B676E2A2F073B46095295
+:105F9000EAEA4FE7BD65F4726042650ADB2F5326DB
+:105FA000B1E7CA0456B6D41F7908FCF6F02E29A52D
+:105FB00090CE77C46A76AF584BF117F610B54B4BBD
+:105FC000CB9FB7DF4C9F7F5C4AB5207DFEF1B55F6C
+:105FD000A4C0FECE93A5151900CF7DCD46BB8EC0C3
+:105FE0006557D41F1A690B07DC745EADEF1184A7E7
+:105FF000C5166DABA475CB4B2EB0707AF939AB5B7F
+:10600000DB67009DCE2992316C6F5EEFFB5C9FCC0D
+:10601000AEEB9E04F7EBE7AB84C5F7C38FA2509EAF
+:10602000CB4546BEDA8942C7BD89F9276129F03AD6
+:10603000C8E570714886573479D63AA4F22990673A
+:106040007FE2761DA99D87E7C890FF2D600F7597A9
+:1060500027F29B4A5D0EEC7F7ACB2D1F409C7A4E37
+:106060001DB3F7F3B67C29203EA8DD974DC7CF2B93
+:10607000C5AB06C99C6561FB48C04FA1481405E645
+:10608000D341C04F0853FDA3878336EE7FF7FD252C
+:106090006E1BF26129D8CEBAF5B8F87A72FD743D5C
+:1060A00009F47409FFEE8F9EF8F2C03880FF32E6E3
+:1060B00022E5854F0876DD3CF2D4CB9BC755301ED8
+:1060C000D8AF6E2F8EEB2EEDC2FB5CCCF21DCC79DF
+:1060D000E0DBADCE73A3997F6F94A7BDEA9CAECCF5
+:1060E000CF734DF26AA4ADE346C4EF1E76EF35647C
+:1060F000C442BB404485DDFB19D1EEA7AE857E23AB
+:10610000DC2E2FD041EBF0F74B003E6BB9BD30B722
+:1061100098A0BF3A37A713ED85D98DDC5E90FC4D72
+:1061200020649D5BD2C81A9DFD80A612B8D08DDC7C
+:106130005ED0F43FD7DBD5BECE66D4AB8DECBC5F72
+:106140008F9DA132BD9AE7637ABDBA997E47E1C4BB
+:106150003C566F97303DAE6CE2F603D7C319FCBBDB
+:1061600099CD4C5F65801DE181340815F532EE61F3
+:1061700065C5ED967EC54C5F66B4EE45BDD6013F64
+:106180002E3306E406D39783DE3EAA02987CF47190
+:106190001B95D38FF3769F97DA67E971FB6C95C8EF
+:1061A000F79B08B30F31E79FCEF321E8AFB31B771E
+:1061B000F0F9ED3D9C7E13C8D79DE1023C57AEF14E
+:1061C0002D463F693DB794E5AFE4D6B17D72B7BFC8
+:1061D000EA29FDF9B3796E76EFD03C8DAEEAA23EA6
+:1061E0001817EF8540392E637C7135B59730FEC4A2
+:1061F000FDAB6B5C3CAEC1E927993ED1E4909B04BA
+:106200003CC514BE1F479E4279AD527F09D6F67138
+:10621000B861C0DDC0EFE169A530FF75E3BEC2FC27
+:106220008FBC24FEE29F353FF35BCA75F7A4A3CC75
+:106230000FED14139EEFC9F1B0F84387449C00CFD3
+:106240009430BB472EA54C4ED83FD5C3ECECCF398C
+:10625000DCD68D7B0ACF6726D5CF12512D09F4A944
+:10626000A66F5B01CFD7D0FEEE379A54F4D323410B
+:106270000BCA57767E314CBAD08F548B648C1BB6C8
+:106280005AC376C0C7FA528E57AFBD1DEEB7F9D6C6
+:1062900078A1F0003CAF0E8811211FF01CF18E6434
+:1062A000711D3CB77C9AFAEFFAFD8AE11E91C34951
+:1062B000C11FE6CB6B66F4B56E9C8CF358333AABDA
+:1062C000DD92AF97BF02979FEC9CD89A71AF237D68
+:1062D0005DEEFCAAEA9EC57B3FB4E7A7363F5D00B2
+:1062E000708EDF7F11E8F33C4555DDDF36ED48B0B9
+:1062F0004FD0D30E7E940BFCC0C81D867D4D8EDF23
+:10630000091ED1107703F96A45E7223200E24B7B80
+:10631000C6473CF01E59C6F66DE7F37DDBCF77DC50
+:1063200082E7C94752B2B226C0FB67F5C6F3EA9FBF
+:10633000ED7C7A008B6B440C79C2F39FFAF908C3A9
+:10634000FE7080289963F915ACC0EFAFFB559B2513
+:106350007EFF800CBF57007176E0E0C170AB620732
+:10636000962EE05F5A7A4837965E504783C14FF2C7
+:10637000639949825866915A2C7D248CE500D2811C
+:10638000650EF8B983412F7463A910AF487472BFCA
+:1063900080F8B15E4882584A80B78CF8BE84B4CB8E
+:1063A0008EF91BB07F017C9FECDC99DF53B9C4836D
+:1063B000FC5D7B25FB1D23B65F31DD13B8C78378F9
+:1063C00088A2FC9ECD45F991E74674C0F9A37BD61F
+:1063D000B2732F9A7C47FF867EE7D974A60FD48DBF
+:1063E00002CAB115CEA9DF4578B65ACFE8F71B88A7
+:1063F000DD5E08BF0FA28D3B9BC71966733D08E1A8
+:106400006E767ED08FE7936643BC41D74E7ADAD959
+:10641000BD34DA38A2F3DAA17DEDF7E9DEC7FCE896
+:106420004A931F7049FD6DAACF31BFFF359D50566D
+:106430003C1EF7EC77955CA457AEBF294129F85E66
+:10644000B3ED04FA63E189013D5C9EE17CA0E9952E
+:1064500039A67C0F733947E2FC611A876AC0343869
+:10646000D78B774AE8F85BBB9F54BBBF677E20247D
+:1064700067B3D77C80472F9F77986CA9C8A6E5A7FC
+:1064800050D7C5F78FA6865EF2E8FC116FA056D4F0
+:10649000DF77B390F3E3444B6B39C8B9D321E207FC
+:1064A0003F623EA9F57C07E2F9472D28E706D2793D
+:1064B000CBF07B2FB0C1918E75157EEFE56C3D3B27
+:1064C00027748ADF33FC14DC4743CBBFF07B85475E
+:1064D000B62D9D0A74F039BF5FB868DFEA20C47D2D
+:1064E0004676386781DE1FD931BE1ADA47EEB2B17F
+:1064F000DFF1E172429B171C7377A4E33976D59ED6
+:106500000EF284A0DE3DDBEA88C0EFFF9CEDB0B068
+:106510007B558B45BCBF0CAE21B4F0F9A5A6C3F7E3
+:10652000FEF387608F7CCEE5C9194F1AC397A40A82
+:106530006A26A4A5103FD8351B9C8BF01C64952BB4
+:10654000F2D46399901F6EF7AFA0DF3FB0F7A55C60
+:1065500078FEA87311967FD9FC412EC8ADB3FB3FDE
+:106560009013D16D8D1495213EB5609F20C2FE49D8
+:1065700079C72C19F647AA761FC0B8728D3784EDFB
+:106580000BDBF6627DC2EEB771FF6470AA82F33A4C
+:106590009B1DC2386F619B2D0ABFC7B1A7207C77B6
+:1065A000C27DFB54A66736385FC5F11F75BEFA3A47
+:1065B000C265B30DCF7F1CD8FC1B1CF7CCFE97F82F
+:1065C0007C09E60B9E4DE938FE13D05F7BF9794CD0
+:1065D0007BA7471F0F965205837C3DEBE6FB5E3998
+:1065E00097E8C7F30589ABD3C3E452A707F6CDAA52
+:1065F0003A181CFE628DCA60472EE81014F83DBDA3
+:10660000F2DDED781E70C13E3B9E975800F000B859
+:106610005178215CDA0EE0FC0B002EFD601DEF626C
+:106620003E7EE13E0A9751F1752F7085905FB5F57A
+:106630005238B075EFB9149E42463CB5BD2D435C4F
+:1066400066E13E01E1B770379B47D53E36AF09BBE7
+:106650006721FECFEC270AC45B4EEDFDE07358CFF7
+:10666000D9FD76BCCF579B17DCB7E02901FE6174DA
+:106670004AF631B9AAD9DD35912CFCDD819EF6DDD3
+:10668000EC7749016429945E47EE9B86FB82A54026
+:10669000BCC0FFDE8E11ECF705C3B900D73DE3A304
+:1066A000B930EF33DAEF2349E15CC08BDF132A4DB9
+:1066B000D5E1E3B3132FA15E2C126BFFFC20F0F1A8
+:1066C000F3EC7738967EB841D4C3E33AF841AA3167
+:1066D00000B7B73C08B79EFB5BC22C5F8A84901F53
+:1066E000AB383F9E6DA77E275DFF676D2F60FBD99E
+:1066F0006C637ED55FDA0EA503DC2AF9790C12B93A
+:1067000005E511854BB33D819EEF39D71661E7153D
+:10671000CF09FC3ECD2734B8D5CAD30DFB7C4C1E27
+:10672000E66CC93F8C7E4624F13947B39D64BE2F89
+:1067300035593EC0492ECF3EE6F774697A77BA27BD
+:10674000342BB55FF2F3DE952D35B900EF4A381BD7
+:1067500089F79C1EB801E215786E88DD931A05F85A
+:106760009CEAB907F5A51B20CFF4541AABD7A57640
+:10677000AE02BBF69476AFAAFA1A7B3F9FB56F8242
+:1067800076DAFF394FB03695D9F702FB7D1F6B1AC9
+:10679000FC4E83A63792C3C1F83B0D4FD3B5025CC4
+:1067A000E8783FC1F1243ADEC87F7E3C4D4EFFD3EE
+:1067B000E3D8FF67C7D1F417F027A43E12BF7FC408
+:1067C000FF04FCFEBBEF93F05C035F5DD83CB809AF
+:1067D000F6D1CEFBD83D30B6D6E504F4F9DC4D1B3E
+:1067E00012FEFE5B4F9DE7E5C88329BFE9F8FA4832
+:1067F0002AB3CB8F70390D7FB0BF0577E5A05D4C14
+:10680000FF5AB3307509FDE761FC1EF3221246FB07
+:106810007404E9C0B2987462398A746389DBCC83EA
+:106820002154EAC7F2AFE55D6361F10BEDA1275397
+:1068300044CC3B780DE4D0D941A1A7E1A2B615CE56
+:1068400045D7C0FCDF48F57278450DBFB742F4BFAD
+:1068500087A1803D38C5D7973D48BCD2999EBC974B
+:1068600002BCCFF6ED545C5FB2DF515B62BAF786D3
+:106870009D0BD7E050433A308FE4B52DF7BC319CE7
+:10688000C2FFEEDD6EB493876E695C02F2FC6ED2DD
+:106890009905E78487F27B44481BBB0F47BB1F6405
+:1068A000789BCDF83BC2A6DFE359C07F3F6B81F9EF
+:1068B000F7A9F839DC167890201FC37C8EF7AFA9B2
+:1068C00089EF7D21C5897F0FC57C8E77778788F911
+:1068D00051F740DE95CEBF18BEA3D666A42FE5DFE4
+:1068E0000AADBABAE067F108B723B053E8FD9DFFDF
+:1068F0000B82D8B2B4008000000000001F8B08009B
+:1069000000000000000BDD7D0B7854D5B5F03E3360
+:10691000679E99849964924CDE131E21C86B0221F4
+:1069200045A47A122246A43A3C6AC15A9C8040800F
+:10693000BCA068B1C59F8144081425D488400107D4
+:1069400044C5FAE8A417E561B00344448BBDA15ADD
+:106950002F522F1D901F1111466DD1F66AFDD75A87
+:106960007BEF6466480AF4FADDFFFFFEF4B3877D2F
+:10697000F63EFBB1F67AAFB5F70C77288CA532F668
+:1069800082A2DCE31DC4D837F87753D773AA5DC75A
+:10699000D808067F8D6C5C31630DD5AA7D15941ADD
+:1069A00002564DEF84A75D1750F219CB4A2C33CF16
+:1069B000853273E8ECFDDC8C8DD58F3EEC86F6C617
+:1069C0001A75B809CAEDDBE67618F07B97CA4C3029
+:1069D000649603FA8532CBD005FA41B9D1FE1BC7C4
+:1069E0000C18BFC006EFA19F1C3B0BB8A1DFFD5BDD
+:1069F000EFD761B9A19EB1741C47F175B8E93B9519
+:106A00003D85D362DAF8A234C6F2F09F308ECA56C2
+:106A10007FAA4F62ACBCE6B4256C83F7E1CAF16C87
+:106A20000863A5F67C5AA7FAFEAD1F6179CBA25385
+:106A30000E1F8CF7C6D6E57F180BFD1902302FE824
+:106A4000A2F0EB86E36361BCC85623DBC6BAE090D4
+:106A5000BB583D1536D380EC1BF82F7B616CD9C831
+:106A6000A05C28CAF9388FA87A280F17E333368537
+:106A700085D2B05ECCD7A93106F364769BF3CC40C7
+:106A8000C66EB22BEC9BDE5DE511A2BCC3D05C668A
+:106A90008579EEF84FC5B314AA0F6C9D9587EBBBB3
+:106AA000B4C7976787752C32270D61BD2EDF3F83F2
+:106AB000DD2DF6CF6FD1B9F019B2305757FB01DB9E
+:106AC000EB4D3EE8A77109F39CEEC79839D06E1DD7
+:106AD00088FB78D8E081227B4861538250AFDA98F6
+:106AE000168471860B7C897F3EB4C4FDBBBE86AE26
+:106AF000711FFA7AD214DCDF48A255DBA65C3E2F68
+:106B0000F99D6A77FB717F0DD9CC9300E3199C1D29
+:106B10009976F86EE02EA3C706201BFBEB41BDC2A1
+:106B200030EEC08353993B91C30BE7AB2E327A4EC4
+:106B3000A730665AE4F4A8C3B19D8DF0F1339B31C0
+:106B40006042F82FFA7933D6376C2D71B9A3F07AF9
+:106B5000F912BB4785796E5A62F6A8B0C0E5627D2E
+:106B6000F1F3CB71E8BC01F8CEA8633EAC5F00FB4B
+:106B700080705C604FA0E77C51DEACFA27E2FC3706
+:106B800003FE2C457C5DC8F1774186398078BEE0F4
+:106B90008D3EE9AC1BBA92CFA797B83C7D611E9B96
+:106BA000164E7731F8B4747EBBE51658FF8244B3B5
+:106BB0001DF1519F54F0F868C4F7370D0CE9AA2174
+:106BC000B1C43D23AA3F7DD24817C243AFF3673219
+:106BD0003B632BECD32AD40CC417FF46E6616C4D03
+:106BE000F3CDBC9CE8CF54A0FEF1E65B7939D5BF6C
+:106BF0005181FA279ABFC7CB39FE4C1D949F699EDD
+:106C0000C0CBFDFC1BB1FCEBE6EFF3F26098432632
+:106C100063BB9AA756F861FC0683678A07C67D1195
+:106C2000E63F08E61F14CF3D76BEAFB2FE37F81E32
+:106C3000E0BD533CE3EB5F16DFEDEEA17EAFA86F46
+:106C4000EBA1FF57C577A11EBE3F20BE6BEFE1FB56
+:106C500043E2BBC33DD4BF29EA8FF4D0FFEFC57731
+:106C60001D3D7CFF07F1DD3B3D7CFFAEF8EE580F8C
+:106C7000F5C745FDFB71FD9F10EDC3E27D7662D344
+:106C8000713FE05D36F02DFC2B4C6C4A46BCDB546A
+:106C90005F4CF8DF3002F07C5017BE672BCC8BE5E1
+:106CA000210E95FA1B82FC189E6F8BFE4BE7F75D59
+:106CB0008378B7E02DBD07F1B041F11CF341FFFE31
+:106CC000F93A0FF2DD056FE8399ECF57032C8ABEE3
+:106CD000DF8E9BFF1631BF4631DFDFD97B13DDE44A
+:106CE0002D7279C64B7E89746F8F2D9B819E3418CF
+:106CF000BFD1C9E54BE1FC32737F941F205F906FD9
+:106D00003E6433864C30FE437695EA1B9D6576AC37
+:106D1000F7DB55923F0F39CBCC3390AFDA80D99562
+:106D2000C07876DE77A35DAD0820FF709453FDD860
+:106D30005F8FB7231F6D64114729AE6F31C815F8F7
+:106D40007E7F7D19BDCF73FCC581FCF968325F572A
+:106D50007BE2214B3EB453EFD391BC28B0AB24C7A8
+:106D60007A2FD605DCD0A4DDBE4087E5271BB9BC51
+:106D700082BFC42218BF2F1F9EEDB8BFE4CD42943E
+:106D8000670FAB1EB79BBF53A3E4415F94574938CD
+:106D90006E728CBCDA5CCC34ECD7EF32079E827E0C
+:106DA000FBAACC9592DC05F73C879ECB17FD780FAC
+:106DB000CAB53ECDB1F229BF294A3E319497B1F20E
+:106DC000295E5EE5D4037F8CFADEE4B2C7942D8E93
+:106DD00044924FC0633CDFC0D00B5A17DC62655D44
+:106DE000FC3A5E1E3508F920F96EC3D7C363E4830D
+:106DF000E4CBF1F2E1CAFCF5ED5BFB131E02B772C6
+:106E00005F99CFBE8D7800F867F029243F98EA7328
+:106E10007913AF0C2F83C16BB7DBAE0C3743EA3B62
+:106E2000A457187C2AF57F995CB9025C653BA3F9ED
+:106E3000C9CDA741AEFDE5FD9F14322099E5001BA9
+:106E4000DAFF545DE0295877F6A2E73663FF5987E9
+:106E5000AC8D0867A36BC6E6465C4FF3E38C013E3E
+:106E6000E9CD1C9F8C196576FC5ED569AEE43E5079
+:106E70007EF6DDBB14C0277D4ABD87C1BE1D7EF1F5
+:106E8000CDE4DB107E6F1988CE4D3AAF9DF5A1E9B8
+:106E900010BEADC8B16E5D4578EC33239CB27798D7
+:106EA000490E30FFF6951A2075036C071B85F553C4
+:106EB000566AB0EE1D4A67F9562C070346DE1E5887
+:106EC00034FE5FAB4E11F54C535DA4778AFADF5464
+:106ED000948F86F6AA7DA00A7267C1DA979A0C3958
+:106EE00058AF93DF6B6C24AC17C7136515F6E7B981
+:106EF0007651EF3FD8540E44D46A94E3333FB66FD3
+:106F0000D5E978D9DFD684FDBF5026BEF73FBD5204
+:106F1000CBA6F9DCA67740D1F17A93EDFAAEF9AEC3
+:106F20004D7EAB6929ACEF1377380996C16AB69EDE
+:106F30004E43F9BC624ABD17E18688EF0599D84BEC
+:106F4000EF263CEDDCB79D13FC59507BF1D0DF936D
+:106F50000641559D3E7C2801E057B3BBDE6C80EFB7
+:106F60004D06AF3F2BBFEBBB9A9D95A4CFD4B51573
+:106F7000D1B39BEF0EABBDFFA5EFCCC6AB18EF9323
+:106F8000D01F6A9F87AA1A7D7D934D4FED19DFFFB1
+:106F9000EED727BFFFE4F93FDC89E35D7087D3C6F6
+:106FA00041EB1521804B37DFC9F6B5BB27D0F3582D
+:106FB00082B6C601EF6703EF227EA5D67BB07DD0F7
+:106FC000DC6CF700A02D86662FCA0D007D4037B21D
+:106FD000EBF90B475F6A1FFF3E9EBE826696321E2C
+:106FE000F978B54A722A68F6270C81F26AB043969E
+:106FF000C2949615BD3B6C10965FB231B44B1AAA81
+:10700000DB5D8390AE3C4686FAEEEAEB831948E7F7
+:107010008D35C629DB117F430B5C33A3F4ADB5C9B5
+:10702000069AC7CAD780EE86C2D3107428F87D3F6F
+:10703000901B0AF2459F19ED1C4B4632F3E7633B68
+:10704000DB6AA4CF95065F4519B6CBD0917CB1F42D
+:107050009B5C5106F370A5EA143DCDA3FCD82C949B
+:107060006F76234A50762279FA6E84D373AAA71ECC
+:10707000E9F0399BCDEE870AE0911AF23FB59F33D4
+:107080008065939ED5A31CCF2A02791EA5C79E10AA
+:10709000FCF384C348FC6EB52538A114FAB12ED098
+:1070A000D9FD30DECA9A751D63619C5FD6BC7C74C5
+:1070B00029BC5F95A6329C87CDA9868C207F0CDFEA
+:1070C0008339C2BC5F58EAB5237F8DA4AA6C1BD458
+:1070D0005BFB1A993B8A5FD90641398A4FA638551E
+:1070E000CD02DF7F95ECFB77078C3BFCAD77CCF8CE
+:1070F000BD6B844E87641354F93E2715C7F6631F92
+:107100001DDB4F72796CBD737C6C7DDAE4D87AD765
+:10711000DDB1E5CC7B63CB5324BE01CFB1813CB65E
+:10712000F22A660D7FBA04E52DC0E73D84BFB54065
+:10713000E741F8586AB69F9D05F559C84FD01E1A09
+:10714000C248EE1EC8FDA91BF5025372BDDB31E833
+:10715000727864E5986FC3FDB2F555ED0CDADBDEAD
+:10716000FFE86BECDFC6A2DAE5237CB488239597B1
+:107170005D309F44FC871BE15DFFE707512E1ED564
+:107180007B10DE59352A8DFFF0647740CFF5091763
+:10719000EA3349A27D927975871EF879D2FB2BE7F5
+:1071A000A3DD1B0FD73456AF205D027E707BBB92F0
+:1071B00091FC58A1635588376823607FA41E01BFE6
+:1071C00098946224389992156137AA3AAC4F13FA11
+:1071D0009331E35E0BD2F1438738FE3F64E4FD74E4
+:1071E000F6E7A64111E519F2C994645D4C3FEBEC5A
+:1071F000A28D28A73A78B9B53DF936A4CB759393FB
+:1072000087219E98D0EE82FE7A659BB501B03ECB79
+:107210001B46BF029DF65259BB01F6B2D5CAEEF12C
+:10722000C23C361CB6FAF5F0DE32F31776D4D38AB8
+:10723000C5BC5B9779DE463E10A954098E96D4668C
+:10724000FBB0417C0D7E981FA203CAC5D27E2DA43F
+:10725000E7594A9B49BE5B8A9A9B114E1BC6EB4875
+:10726000DF48BE5747F86CC9091EED8B7E82993AFC
+:107270003BF6970C82DF089D3C9ADDEC45BF090385
+:1072800098EB4A38AA60BFB442182745C0D5E9DC5C
+:10729000F91305FA49C1FE86F0F608278780D3E87E
+:1072A0006437C1DD29FA4DE90BED87F07E1A4BBA40
+:1072B000FA91FBB8A18205707E725CD94F67FF4CD2
+:1072C0005390AF1A7E0770837D5272CD34B987E632
+:1072D00032B28F5B9779EBB7125DDBC8CF91E9CC07
+:1072E0002E433CCA3CBC71A26E087E67A5710C336C
+:1072F0005900F1385365E61B9351BFF1121CE3E9C5
+:1073000035A3BD7912EAA9725FE2E93743654DFA08
+:10731000E4CBE938C3E92C2B18D20D3DC7D14BC6BD
+:10732000E1C87D88F4F174BD25E14211C28545B7FD
+:10733000D75FB9ACD7078FA29F87A5839C00D0E702
+:10734000C68DC7D83F4C585698CEFD4D1FE4FB0E56
+:10735000E1BF017905C4DA3ACC3EC686743A9F1182
+:107360007E95ED5A7DD7EFA0BF4BFD8C76942B39DF
+:10737000879B3B503EB2DDBEFEB80F9B54DF130926
+:1073800050BFE9583A43BEBDD2C2ED3155E079BC99
+:107390007C592BE8C68D72CEF5AF3FA57E18EC9BCD
+:1073A00036D00EB4B7F617156F9853FF07F52CF6C5
+:1073B00002E959D9ED1D4B6D38FEDAC34D6680AF39
+:1073C000E52DDEBE19CA7E15E1574DFEAC0339B37B
+:1073D000084EEA7113433C1DACD70258667FB230A9
+:1073E000E4BF3B5EBABBCA8DFC276D9C1BF9D0364F
+:1073F00041EF01619FC5AF5F356A3ED427E2DF6F81
+:107400004CD689FDF49EAD847D1CFCA491AD82CA4E
+:1074100042DDF426B4EF222B81FF42ED74BDBBF6B2
+:10742000E751F6ED23D6D26032DA254BCCCC070AF1
+:1074300073F6970AF30171E638FF508AFC279785A7
+:107440001494B3B9F5A0F0225E2DB4325F14BE6778
+:107450007FA952FB47AC5A3079047F6F063E60E04B
+:10746000FF64CF257B59A593F328D45F0CCF5B4FE6
+:1074700022DF60CE72ADD31EE98DF80B721FC6DB22
+:1074800027D66D00181A86C17F365DC834E4F2F63F
+:1074900007049C54B32D84FC52B51D3946FCC5AE7F
+:1074A0009E8F6E87763731B16A467E59840B957F01
+:1074B0006CA77216F05FD330D2FBFD687FFB93B8E8
+:1074C0003DC234CDED4C437A6104E46C336B3243FE
+:1074D0003BC276A0B70CD66121BDB99DB9911ED033
+:1074E000C3762681581643B86E62AC229A0EE453D6
+:1074F000FA25D4457AB2A7061EB4D07C0CF52C60D0
+:10750000417D08E706F05617B2809ADFE5171CE2C6
+:1075100070D37746564FFAEC0B5F9FC8443E6D3DE3
+:1075200004FAD850DC671DF129AB3596FE185B4A8A
+:10753000708A08FCD8BCC44EFBDC69BFF9DE11FBC5
+:107540001C5E8AF222776172CCFECA76D95F663100
+:10755000DFF0E87E03D46F76DF7605FD32D95FE693
+:1075600052FDE625EE2BF4DFBB87FE33088F7AEE63
+:107570003F9BEA3787DE71DC0EA0D814697778DD8F
+:107580005DFA753C9CB317C6F2E5A1BB63CB122E26
+:107590001683E69C0030B7DCA7F36C85FEBE732C27
+:1075A000B65D45FE1FC9FEED6A1F724EC2F6609FB2
+:1075B0006F85B7379C8D6DEF2D7DCD8174DCD59EA9
+:1075C000CFEFA62F63DBC5EF4FFC7C615EA9DF8F99
+:1075D0009AD718B329A67E4AE565F34AFD41D4BC83
+:1075E0006E71C5B6F72DED7E5EB7159AFEE9BC64E7
+:1075F000BB3B465E5DBBF8754CAA30F50077DEFEFE
+:107600000753AEAEDF1F56FDF376F72C8A1FC74F28
+:10761000F8BE40A78D4981FAE9F80AF5459B95F433
+:10762000DECBEC2C219FC6A1E201DF7992B471F888
+:107630005D85A43BE16738FCE275E9C8D7B3841FD8
+:107640009D09BF426BB58BFC0A3ED11EE44923F273
+:107650008BD61DF05D129F57B4FE9452CDED0A3BC0
+:107660008B103D4B7D2999D9156E8F737DA7A7711E
+:10767000E2FB7F18154098EF8C4563D80740872FB1
+:107680001BEDA52ADA675B14D20766946BFA44C037
+:107690008F514D0AF995663CF0F6A3E88FB9FEB418
+:1076A0007B7718DECF08383C386C6D07D3304E90AE
+:1076B000AE9F5FF4203C1F3BC0288E86E5F9886FA3
+:1076C00036CD8DF64625CE08FA396FA82FB223DFC6
+:1076D000FC914D43BE5939597B8FD6FB156825D097
+:1076E0006E265F3ADBD532C188F18ECABBDD2351ED
+:1076F000EFA90C5A347A9A996A857554823E86CFDE
+:107700007423532DF8B432333E4B9671FD2B69A48C
+:10771000D75809E357B63DF357FC6EB61ADACFF5E2
+:10772000C900ADBBB2ED8DBFA1BE3653F31A915F58
+:107730000CDC61E43AA9C087C1C1D832F283E87297
+:107740005128B63CFC706CF9D3140EDF51C28F7512
+:10775000609F89F8F6BC8FADA47FEE05818776B275
+:10776000FF0513C98F31F36CB45F1F9FB36E45BF24
+:10777000DEFEE3566A3FF7390B6FAF0BBE8865FF3D
+:107780008B096467CF4B099624C3BC5FF95A4FF04D
+:10779000C66519B0FF17076C5D85F5C383251817FB
+:1077A0007BF93AC63AB05E0D0CC175BEFC0FEEB760
+:1077B0008E3C6B0A6C837E3FDEF3CC8B3FC3719FA4
+:1077C000CD4A56607F6E40B900ED463D69B6A2BD18
+:1077D00031EAE3E7FB20DF98B7C314B3BE175314B5
+:1077E000A13FB89310EF7AF23B9E5AF90C7D5F7877
+:1077F000F618E1DD5E835F87713CFF4A8E677B2D63
+:10780000DC4FBAD7921BC07DDA97C2E9EA06DDB633
+:107810005FD6A27EF916D7437AEABFD03563737973
+:10782000377EC6CE7A18371FF6F9E247D67BD01FCF
+:10783000D77F7DEC3E0D08C4965F4BE17AC274168B
+:10784000F53E1FE7D37BB90BE7B395D17C0ACFBEDA
+:107850007F573EEAE326AE87C48FFBFB142E3F7FA3
+:10786000F52BE887F3193DD7C3016240D7F3043DF8
+:10787000BCA2703D18FE166601FECF4305A277D765
+:10788000FB7971F390FD2F1570FADC9CB40DE5B90E
+:10789000D3C8F1FEDC92C38F621C53B63BB344D312
+:1078A000CAA3FCCAB3D6CF3F9401FB5FDD9A4A76E8
+:1078B000A67C5FFDECC1B41FC2FBF33B540FAABE14
+:1078C000D5539F7E6414B67B561FC47962BD06FDF6
+:1078D0009F0FBE9684ED666D720C437F89FC7EF629
+:1078E000FA9BB5F2287E7AADF424E9BF5AD8C7BB1B
+:1078F00046768CCD0278CF5BAF78B0D9BCE0F72765
+:107900007D0F759D4D7A0FC6374A54E6D50F23D3A8
+:107910007D323EAB5B5F3A9409F575FB4694E0BA65
+:1079200056E9BCB70D467AD962203F58FCFE189D37
+:107930001C7FE1FB900EBE5F75A7AD0AE322D06FFE
+:107940003B960F146ED3A31F3FE92CF037FEFE9831
+:107950000E78E6D9B6878680CD02786C6B42FAD86D
+:107960008B8E0B1CE7053DC90916E2EB1825FCCFF1
+:10797000F3FEB3C5A8C2F3ECD96549A59CFE689F88
+:1079800090A93B617D554F0E267A9DBD3E96BE6403
+:107990003B39DF3981D8FA78BC28704A7F052B8CB7
+:1079A000C6AFF87629E3FD46A4C7EA45C0CFA3E8F1
+:1079B000A6FA74B311F5AEF871508364725FF58462
+:1079C00097CC4DEBB5F0F582CA6B86F59EC37F71FF
+:1079D000BFB98276FD5C8596C8E65DC7CADD00CF7B
+:1079E000791359053E253F3C3F323804DBEF35849F
+:1079F0009FFE25F1C144E207E7EDA124F42B650ABF
+:107A0000BFDE79772809F9DC4511B7C37A2CCF6D31
+:107A100003790074FDF12746920B4B83079370BFE7
+:107A2000CEBF68D1E9605F3E6E4D29437FD0F9E05B
+:107A3000EF92705DE7822965E8D7EB894FC4F33791
+:107A4000A90F9CC47F5E0F7A8F531BEB44F86290A2
+:107A50002103E44D4A7D517D37742FBF731AEB8BA0
+:107A6000304F23F2239B671B8713C5F33E3B9CB229
+:107A70000DF75BF2D94A85F72FBF9FEABC3ABE5A91
+:107A8000B16A00C5993E63EE5EC8E7EF46DA80F959
+:107A90001DDE5FD00BF50DF9FEC134EF3D4EE8CF92
+:107AA00055D641F901AE71CCD3004D3FD07BEEB736
+:107AB00003FCEF6520FFF059EC3392DFA63195D639
+:107AC0003743652115F07D06CAE72154267D68C637
+:107AD0002625D000EBB977752CBC66B598BAF004B2
+:107AE000FE9BC380B122216E8A6A07FDCF41390C0B
+:107AF000FB30D7CC4209D0EFDCEDB1DFCD63219A6A
+:107B00004FF5F3DF98BADB8FBF8AFD78304D5B8489
+:107B1000FBA14C34D3BC7EFC824272D229FC9591ED
+:107B2000C77A0530AE364FCAFD77F8BED53D50A9AD
+:107B3000DD0BF87771D10CEDDE144A3DD1501F6199
+:107B40002D8984CFF3CA592807E637AF4D090D4E6A
+:107B5000EAEA8FFD46E1761EE3F1CEBFBEC3F7F140
+:107B60002EA13FCD84D7A88FDCA0E3793D910D0AEB
+:107B7000C9D751CF2BFE44E0CF33CD602A229F12CC
+:107B8000EBC6F6BDA03C9BF9094EBF74E6D3FAE6FE
+:107B9000B00E23A7A340431A8C5B7B167813BB1A45
+:107BA0007CB89EF6FD73E6A17DDF82734E457C288E
+:107BB000213C91EF414F6296E4CBBFC7FDD3A2E0D9
+:107BC0005DB529B6CCB647957BE3FE40396ADF6ADE
+:107BD000777E63D2BAD9AFC73AE55B60C084C1D1C2
+:107BE00074C2F5F013623F1FFBFEAC0CE44B6B500C
+:107BF0009FCE141D8C443ECEA49F256486FEADC34B
+:107C0000598CDF05F43D2ABFE2FCD1B8F5D98CAD23
+:107C100033F8287E3143EF3D84A1B6A274DF6F11A3
+:107C20004F66E8B45C95E0AA1590FDBD88E3C3E318
+:107C3000C3EA07D4776377CBF9AF5382211DF2A74C
+:107C40003D5C5F492C8E187C5174FF9EE0BBBD0EDD
+:107C5000840F6521DEBDA4509C6083C21A1580B3D9
+:107C60000BF619E5D306E5E42194671B6E75B306A0
+:107C7000A82FDE3961FE6B64BB5B29CFA86667A9BC
+:107C8000BEC646EBE7FA7342FD561DD4A7DF533854
+:107C90000CE90DD67DCF44787FC2E9A67965D83846
+:107CA000FEB896F9F317A09FF88077FE6B8877836C
+:107CB000ADE48F4B07582526D3B309F562175BAAAD
+:107CC00060BBE5A90ACF83A864537E3388B059ED21
+:107CD00095CC9FC7E0A9A8AC11FDCBE92AE8D9FC57
+:107CE0007D238EF358129F57AA4E7FCF04D4F3877B
+:107CF000F172F26245DB46F26C2DCD2BDDC42A70A9
+:107D0000DDF81EED029886D64AF5018253FA98FAFC
+:107D1000229C477A1FFE741A43D9D8CF914E3CF16A
+:107D2000E9507E2C147AC0C2AD65E9C8EF8F9C374C
+:107D3000ABC8D78FB8A43E1BB2A13ECBFA16F2F661
+:107D400042DE2E2C1A938E44EDCC8D6D77D1A0F5AA
+:107D50001A8E72EBA89EE24F7FB169BD1CD0EE0671
+:107D600023EB36EFAF572ADFD7BA2F151688F26309
+:107D7000D44DB944F642DD976ACCFBF34BCC2C10C2
+:107D8000E5C7A8AE3A3016DBD5B08EE5888F35C191
+:107D9000041688A28F1BACDD8F2BE9A2EE4B3DF3BE
+:107DA000773BAE31F6FD9729CC9FD25DBBB4D8F7B7
+:107DB000B08E98F2EE2F3AD781EFD9C87012FA75CB
+:107DC000C7A37C86F2C580CE6F00BE75C4C0E5EE49
+:107DD000057B38462E5F7087B95C46BF958DCBB367
+:107DE00009B8CF6A24696262D738B21EBF4F8E5A73
+:107DF000EF85294616A2FD89D03C107EFEFE8C6DD3
+:107E00006CFBD488F93AD56DFB097E126FA2E1E8CC
+:107E10008F8E8335748474C033C6A56E5F35680059
+:107E2000A0E001C91F9E5EA58D867ABD2E865F24C7
+:107E30001477F20F62578F61548EF8CD33ABD06F49
+:107E4000DB55E6EDBBBEDF310EEB8B07F1EF27A76D
+:107E50003EFBE6324A6A69E67A971AC9F5264695E4
+:107E6000CD71651B94074795ED71F5CEB87A575CD7
+:107E7000399BB73F9F18CAD57B18BB27F585712A58
+:107E8000F0CDF319A16998C7B6BAE1D7E3CA819FCB
+:107E9000D51473395FDBA678485C09F8D57AB81E2B
+:107EA0006BF3848D983F9750DC7108F94BF56EC5E4
+:107EB000AE003DD882AD212AE377EEA8EF820A7D9D
+:107EC000571D3C49DFF5D87FA18EE87D55E129DEBD
+:107ED0002EF821E9132B1AE753BE808C87EB994FBC
+:107EE000CB52BAE2E192CF5EC8D00E129FDDA7D886
+:107EF000913E3BF114FB8DF243C9F67F1ADCF64745
+:107F0000545712167EBA14F5EBFFACF97004EA9BD5
+:107F10007F12F2649D121880E36E64BE01284F7FC9
+:107F200054D36FBF0EDA9D30843763CC6F4BEA6B4E
+:107F300004BF1389E11CCC0B0C3CF6EFBC9C1ADE91
+:107F40008CF0BCF458C738CCFB3B9113CEC13CC07D
+:107F5000EDA9FFC5CBFDC29BB17CE4B133BC3C387D
+:107F60009CA387EF7BFB3F1C570EDF3F65EF9EAE68
+:107F70001F13FC44CEAFB6AFD69C8A7A5E359743CA
+:107F80009BC1463303DF9C36F7DC0B4F011CA6FD7B
+:107F90003481F8D953E7278DE3F682DFAB96A03F13
+:107FA00099FF919C247EAF929E9181B231B96B3F33
+:107FB00012733BDC2447AEAB6F45FD257DDA209282
+:107FC00023E54EED0B1C573EF767C113DA7F916A2C
+:107FD000E7FC5BAFA3F87AFACF1249CF5B63E1EB22
+:107FE00001BAA1FDB589FDF89558CFAF52B91D7AF8
+:107FF000BFF366EAE72EA1DFB7AC0C3C6B01F81FBC
+:1080000097793B6BB9BDF0C3ADC057808FB738B41B
+:108010000CE4273F147978927FE0FBE4283BA9A584
+:1080200008CAB62E7BB86582966175E2334D8771BA
+:1080300024C98F5AF2F977522EA537F071D3D70C95
+:10804000D886EB4850B93F6CE694826D4B492F9827
+:1080500048F3659A96A1407FA7E7F4D6A19F4CEE1E
+:10806000CF9ABE5A3BAD47C419E43EC9FDFC2295E8
+:10807000DBF733F4A057C03A2DE93EEA0FF48C2128
+:10808000C21F477AC617B8C751F0656A7804BEFFA9
+:10809000FF084E1F7D1B70AA5904FC427715FC4255
+:1080A000C06F9D1232A4737E41F63DBE47B9D3EE38
+:1080B000F47D9D1A95AF33ED6735A457CA7925FC39
+:1080C0006457C50FD8E57416AFF799D2F87E49FD0D
+:1080D000D423FDAA629C13C7CD144739610C12DF6B
+:1080E0003C0176D552E42F220FA0E4A7F38EA07DA9
+:1080F0002AFBAD49D373FFB4DC77C5DB3A2B1FF302
+:108100006298DF8CEB9860A47D9772B7C5C1F35C71
+:108110005A1EC8A23C978B2CCCC83F3B92117F04BF
+:108120003CA0FAC8D434A27F68EFB760FB39D751BE
+:108130007BC00B3FF187A956B2835A306E8EF55340
+:108140000B03989783763CE1DB1C1D8DDB0DBE7025
+:10815000FF777F9EF721F126AD81FB9998AA0D99B3
+:108160001025E76F4DE3FB9C501C7EE93F50AF5D4F
+:108170006D21BD16652CC5A89AD3A91FD8FF6169CA
+:10818000DC4F417876EF238922BFCE5382705D9118
+:10819000C8F1729385C7CF36811E4D7C51E0AFCCBC
+:1081A000EFF3097D2F5CA54B427D414B937633C89D
+:1081B000F512E1BF87FAE961E524DA7FD3FDFA9091
+:1081C00009FDCC4D376BE1283B06FF30FE788FE090
+:1081D000AB6C3D233BEB1EFC2E09FBB72661BCF5C7
+:1081E0001EFC1EEDC8C537C7C41527A671FA96F345
+:1081F0008BE7FB13E5BC9A1FD7A2C791FDC7F70712
+:1082000076EDA4B4548273A817EEEF523DED5FFCF7
+:108210003CC3EBB91F3EBC3E8FF04EF6D7D33CFFBC
+:10822000AC8FDCA7801C9C3586DBFBD2FE9929EC49
+:1082300071B638D6BE43BF4F67597F7939DE5EC409
+:108240007C81D8F65C6F4918143112DDBA9598F923
+:108250004B78F5048707AE116E52EE3D6E013A0081
+:108260007C598F7995805FEB1F482039E6340606EC
+:10827000205E6DC47C1D92A7DC8EFFFC48AC3F26BF
+:108280007EFF7E9E26FD6AD7667F3F8278D18DFD78
+:108290005D678D6C41F8D75919D1E7857D89448F89
+:1082A000AC6F781AE6D15DDC6B62480FB54AB80056
+:1082B000F9E00545ABA4764B13DC4897D2DFF1C15A
+:1082C000CBDCDF51873B03EBADF3FF17E571D5ED59
+:1082D0008EB5CB2FC07F5540471774E112EC4FF29B
+:1082E00017D0CB35D2B7AA787CAB56C7FC68B7DDC0
+:1082F000A09B3E87F38D4CB68DDE9F2C5810A5F7C2
+:1083000043BB762599A323D261B5D8975ADD296A54
+:10831000578DF958B83F68BFA11F102BA3FCD6B5E5
+:10832000AB3FA67CB0DA9DB1F853DD855FCA370A52
+:108330007E17856FC41FFC82BF30EE8F29E7F1F9ED
+:1083400044514EA8E8A0FCB03AE18F493D101E8B85
+:108350007C2AB138C8A6C3B3EE2CD75F46B56D3DB5
+:108360008876BAA3A22307C9AA4EF84125FEC87988
+:108370005EDFB6568F76A4D47BA2ECD8011363FCE3
+:1083800018CBE83BB48B71BC30BECA40F4E2F27249
+:108390009D9097096860A35C6DEE4F7215E51EF223
+:1083A0003B695723FF43FC2A4A2F3B8EF4FF467A52
+:1083B000D91F399F04BC453B018DB4EB7BC63F09F7
+:1083C0001FD90EEDEB7FEE9F147C9C71BFE48237CA
+:1083D00052FF291D9CEFE4AF57F44BA623BE2F504C
+:1083E000DCE988EF17057F3CBCBF80E2A0F2FD19F5
+:1083F000BD8FFC8FD2FF3507FD7EF0AC16FC689672
+:10840000F097CD927EB2F5B1F15AF4534797E74A0F
+:10841000BFD90E53571E13FAA9CA592811FAAB41F6
+:10842000BF1B3E83B1DFD5B2087D57B7FB1B534C52
+:108430003CB885C3F11E814F8EF2801EF9D8060B21
+:10844000F79F49FE366AF156C2935EC3B4FC87902B
+:108450006EDE3090FFE57F0B3C90707930ADECCF55
+:10846000B8AF56BDF00F3E6422BE7E1AF48556E1C9
+:10847000F7998876F212A6E13901A6DA73A3ED68BE
+:10848000F95CB5D75285F89899AE8BC1D7F634030D
+:1084900095C91F46722381F402607343105F4B7AC3
+:1084A0004BB9CD86A01FEEA4B0EB6BEFB4F9B0BF13
+:1084B000B08EF3C5FEE97C9FFBA7F3BC5959EEB41F
+:1084C00043053ECA382BFAA5A2E314433ADBAF15A5
+:1084D000FA2EA3F5AE9B23F2E83BE942477C2E61DE
+:1084E0009097E4C30DBA32E273918F6C6E844BC5E2
+:1084F000C7D573701D9F4DB1D279C97B859FFCC6CE
+:10850000749E8726FDDBD7EA272F4DEFC4C7183F9F
+:10851000F95EC117F7323E5FFF592BF7F7AACC8FF0
+:108520007C726F704000E75B29FC23A87F21BF8E1F
+:10853000BCC4F791A95C5FDBDB3638807474D2E091
+:10854000DB3013FD4DAD06F21B3235F0ECD3D8CF46
+:10855000AB191ECCB3BAA08B6CF93DB4DB7BF657DC
+:10856000591857DB2BE21BD5C65001E9F522AFB4F1
+:108570003A2954807EAA57C47E555BA10CEF532C38
+:10858000BEBBD253BBE28FF81DBE3F15E076C329B8
+:10859000C6F1C0BF9AC79701BE193371BE2BD3294C
+:1085A0007E89FB82FBF0C1BEC1B4AE7506D17E0FE1
+:1085B000F7732B130BA7919C59654A41F85FF41A86
+:1085C000292FBA6E0DD76B67E8DC5B1621EF7D357E
+:1085D00081D637B3E528C595EA1E994DE74DEBE600
+:1085E0002EBE9DFD93780BCAA968FFFE0516C9250E
+:1085F0007BBDAA773004F3B8D036C0C3C3A5FCFC5A
+:1086000052ADC8BF3D6D601ACE3BB2CF10E8EE5CF4
+:10861000654FFD9383B384CB4B1CA72E3AAE45F236
+:108620002536CE75A5F20543B8E001187F758A6F2F
+:1086300075BAD03B115E75AF66101FFDE0E12F7279
+:1086400049EF69E6F194D3066D1AD289A33C649C84
+:108650001EC55FB70B3A9E6112FA2DF0C168BA973A
+:10866000F52565B174269F4F0A7A4B14791897D770
+:10867000CB3CBF492694C7DCF585FDBAF9393411E6
+:10868000DF1C7536B21FF3D9AA8345143FCD5B1C9E
+:1086900022BA047887D03E39BD2191F3135826F6CB
+:1086A000336B2423FD7A969EE795CC3281BECEF5BE
+:1086B000026A7F66433AC1A16419D753232F29C4A4
+:1086C00017659CB792F1EF77359EF4EBA17DE50E2F
+:1086D000A508582BAB6C2CA5BC93B99BF269FF473E
+:1086E00009FE3BC3A4156C407CDBC5E384301ED976
+:1086F00005D5985B378CF89211E56BD50E85E22590
+:1087000072FDF1715516888D478D0A72FE8D728348
+:1087100045E993520EA1BC60717A6E2C5EF8AF4AA7
+:108720009EC6CB8377D3AF56AF8C95A7EF21FF4A78
+:10873000BD5C9E82DD701CF1B0A48CD371A495C782
+:108740009F6A583D8FC30979D6B92E210FCFE8B95A
+:10875000FC9D655A4BCF8BE93C0E359785451C2A0D
+:1087600062C4F9F5845F17D3657E7B2C7E49BC8A91
+:10877000209E417FD56759E8BB305EF56216AA1985
+:10878000C29F894348BE73396FE6721E9FD6AB9075
+:10879000F7F1723E5EAEC7CB73146728B7253E452E
+:1087A000C723504F1AB538A0E7FEE66C3BE665CA12
+:1087B000FDBDDFA939B253BBF4C0BA6366B37B28F1
+:1087C00096BDACB70DFD68A59B73A0BE4EE5E7C393
+:1087D00013004E5BE1FD666187ACCAE174E612F9F5
+:1087E0005706D5CB8A6CB84F1DE43788A432CAA788
+:1087F00097F0DD9C08DF613E420EC78FCEEFCDAC17
+:10880000D11AF57DD95E0BC9A94B7B12E91C205307
+:108810007D790EE82FED4F603F40F9C2DE44D21360
+:108820002E08B9E194FE19B69CF6A38F8BEFB39F87
+:108830009565A19F9B29E3B2189D8FE7FA6C8DA3E4
+:10884000A7F884A8CFEFB893E39989E4F52547F812
+:108850007E2CC37C28BF3BCBC5F7BD6EE798A29F9B
+:10886000615E86D7E6E150F515A1FE61D22FBCD33B
+:10887000ACC77B1216471E8075D4E4D8286FBC3C69
+:10888000EFFD77A742F9A39D063A5F3AE7A949BDF4
+:1088900042F899AAB9BAA393390143CCB9C5793B37
+:1088A00062CB35C1D8725DDC3D058BDEDFFA667BBD
+:1088B000547DB94B9CEB74330FE6BD33FDDDBD7CBD
+:1088C000DDF05DF9FC6249E0CDF67E9437789B8B54
+:1088D000D3B311F5A3E9880FDD7CA773F17D35993A
+:1088E000EACFE2F903D32B26BACF20DDE59BEC4A91
+:1088F000453B2A7208F7D394777E08CAD3B2BCAF3F
+:10890000286E78E941E641F85CB294929E746983DE
+:10891000C58D76634BAE8DF0A0E55525A070BB628A
+:10892000FC08E0AF55341558EFFA5B3FE2876598D5
+:1089300099DF7F0056950BF9954676DE990956FB2F
+:1089400032F8AE6A3D97DBD5AC2309F9C006B97F92
+:10895000FAE78D66F8677EA3366029CC779ED74A02
+:10896000E7A4D4AF55BA1F600576196597D4BB3814
+:108970003FA831878DA538FE570B2BD00528FD79F0
+:1089800026834FC3F37886DD45A12C78357BD14112
+:10899000B2BF3AE3F6FB38DF9AFDC07E7AAF4CAC4B
+:1089A000A0F59E81F5225C0E6E30D17ACFE4D8C856
+:1089B000FE3DB399DBF9B3EDC68099F4962F53F0E1
+:1089C0001CF399CD06BA3FE07278DC42E7893FDCC0
+:1089D000F43AF91B3F647C5CFF4E3DE93D1FDA230E
+:1089E000252184A3BB3E09F5E6AAF573E83CF2EC29
+:1089F000CD7A2FF2B3D99BEFFBFDF5E8279B785793
+:108A0000312EE926C7C234B7ADAB5EEABB6AF2C805
+:108A1000A7910E6FFA7A4CC74DA8776D063AC9E751
+:108A2000E71D50DF6FDF7C0BE9B7B327581DB82E69
+:108A3000F7A6A7C6A21CFA7042269D9F9EFD82C281
+:108A4000F0CA8CD98E4569F87EB6A27ABBC3A7A1BD
+:108A50002E7EEEB934CFE609E1777FD4139E005D18
+:108A6000DD8972B866B381F4E7F689C7DF9DEAEC69
+:108A7000A22B65E2FADB4761FB670CD4BE536FDAC9
+:108A8000F43D892F2C5482F619875B3C9D99F21690
+:108A900017E0BCE2E96DF6B2FA021EA7BB36BA6374
+:108AA0009B38DDFD9B4BDCFF71F574B7D7957AF5EC
+:108AB00074C7B29363E4F0E5FCCD4FF094710EB34C
+:108AC00087694FD928AEAD29C07F3FC080FE087CA2
+:108AD000F27362EADF16EC780BF1D8E53B82F3C85B
+:108AE000635A11CA4D77C45E8667C06C422F649B7F
+:108AF0004CD29E203B615D2A7B7A55945FE4CFA2E5
+:108B00003FE0037FC47E2EBCF7D521DCA7DADCF37F
+:108B100043D0BF5DF7E55F282E6A6BE371759B2735
+:108B200042F90606A797F050F2F73A0F973FF1EB9C
+:108B30002AC8E0F6619D3342FDE833DD546E1171C1
+:108B4000A48D8BACE437DEE80C58B8DFC3CF503EC1
+:108B50008D1FA9E7F140A1B77D4FF85DCDC507197D
+:108B6000C601D9689E8FF756F1413505CABF1F79F6
+:108B7000B387CE51163FD9D41BD73DDA20EAFBD0BC
+:108B80003D27FFAE9552FD0297DE8DF43DBE98E77E
+:108B9000A3B2AA24F2E7BC55FC81F3DEA8F97B99C5
+:108BA000D96D03BC9908C41A9DFF78FB688BDB164E
+:108BB000853F9F352B155C7F76F79A3C98FB6B4879
+:108BC0001E17C7C26381CB48E3BE915ECA3200CE96
+:108BD00037DDC8F7E3DC0BA600F2C173E25C523C60
+:108BE000FC7A6508FC5107C4E427388DC15C949376
+:108BF0001F2BB1DFCD6DD2537EC09C26850560BC96
+:108C000073CFEECA457EFED153BB72A747CD27FE78
+:108C10003BF9CCC888F57FC6FBB37BF263CB7617F4
+:108C2000D7339FB94F57FB8B557F273FF6F436E17B
+:108C300007D7B4BE4EB4AB44FBF8FECA057E28BBD2
+:108C400015F29F483FEEA9C34F62C4A873FF2C6D75
+:108C5000F9BAE83C52F91C25F66D12EE1B2CC5D270
+:108C6000C4CB3DED574FF47842C821B96FA79AFAAB
+:108C7000F442381A6B6D2AE3E7030B51EFDFCCACFB
+:108C80001EA4A72F443EB1D30A4FD0D38C992E1BDC
+:108C9000F233791FC34FAC49DBF0F985C837765AF8
+:108CA000E109FDE46416527F5FE8BC641FFE44DF07
+:108CB0004CE7466FC9E0704867214541563BEF6578
+:108CC00085F2E49A62E19DD6C0E548A4D248F24B11
+:108CD000C2FD86E9F7931DDCCD7EAD473CCA1CC9B9
+:108CE000DFF933F2851E1DA678896524B3A39FA002
+:108CF000E17A3FCD43EE571D6FCE943685F467CCB5
+:108D0000F34948A6B8B05F3C992D9975C6491284BD
+:108D1000DDCCE2E222E9A077633B394F2853BED095
+:108D20001A47B0B980C795492FC57EF1FDF4412A95
+:108D3000C515B09D71D895F1AF134F453EE878F950
+:108D4000BECADA6D1C663C9ECBC27D00F9887A21D2
+:108D5000F31862CE656D027D1AED3D19E7D6EB8200
+:108D6000452EB24F3AC2E887319698DD286F13F44A
+:108D7000C142DCBFF8B837B4CBE7F916D90E94334B
+:108D8000F2DC55EDA2315E8CC781FEE137E3FE4D8A
+:108D9000E0FB57FB4029BD5726162E45FCAA5BCCAD
+:108DA000E87E88316DAD940F5657C1F5B1BADD2715
+:108DB0008D0CF077BAF00B31E1174F13FB7A4AE8CC
+:108DC000DF5D71BDF016CCB76F99934DE7ACE3F35F
+:108DD00067AE35AE7B31110032342A5ED7CBCCE59D
+:108DE0008CD87F49DF327E9738C89B8F9AB861BD97
+:108DF000E98875C4B5E4C7841F2ECFFE27F931FE7C
+:108E0000FADB313FC68C5ABEA8C769801CED3C47CF
+:108E10006971537CAFB31EEFBF30EF56C47839B7DA
+:108E2000DFAC529EAF289F5A8D7EB1351616335E49
+:108E3000F4FCD4B8FE0DD0BFCD2DDBEBC6637F8F25
+:108E40000D13657FE56ACC075A6388ED8F50509EFD
+:108E5000FB34778DB7393BF8F0EAD15DF21CE4FBC7
+:108E600061941752AEAF383EBE79A81BE9EB73CAC6
+:108E70009B96F2B9CEC9F365E2F9D8DB829F835E97
+:108E80003C1645EE8A29F3E9BE88CE38775BA58685
+:108E9000FAB08C73D72DF652FE34E803FF9141FAF5
+:108EA000C0F933FB19EA9DE7C82EA8FB52E5FE2660
+:108EB000D02BF0FE1F735B29F955319DB75FD4FEAF
+:108EC000CF15720A7578A487BA4D3F784A0FF543DB
+:108ED00033B530F56BE8FEFEAFBF65703DBEAEB09A
+:108EE0006C03F203B65DA1FBB756157E467A47EDDB
+:108EF0009E9B4744E7FFCFD9FD18CF1FDF61E8767F
+:108F0000FD7FCBE07A6AED9E97C86F7A2EC08F2DD9
+:108F100055A98195A8875655E950F362C581CAA91C
+:108F2000A40F4C8175C0BAFE9CC1E153B763921F78
+:108F3000CF23D4C17F0ABCDAE89D4576C1C6296635
+:108F40001BC697EA0AA7CF27FCB75B355C7FFC3CC2
+:108F5000BBE2E9563A37BE6AB7A102F5A812D09B28
+:108F6000FE0DE69B933CAEC2037C294BDF5AF463B3
+:108F70001BE617742F97B764713DA051F1FAEF28E3
+:108F8000267F298BCE57CADBCDF5337BA631C63F72
+:108F90006FCFE4F74C8DF6778C419C7B550D27A065
+:108FA0009E5CC7B44FD1FE655E9B9BFCC48CE713EF
+:108FB0003897B8C94F6C76867F3E94F42895E2E9DD
+:108FC000D2BEB8B087FBD79665FA7232D13FA80FF0
+:108FD0003F7A07C2EDE7AAF037733E933BC9360CE0
+:108FE000FD611667F8D10A37E519915FA2D7771BA3
+:108FF000691F5E75323BC2678CBF5255A2E48CE498
+:109000001B633ACF4D39C90F5BC6D91AEB07BB7545
+:10901000C64C28DAF84D4A979E70F8ABC92ABE9420
+:10902000FA83CEEC233BA77C0AD88D8897CB238785
+:1090300074E8F7777690FE581354689C9AC2DF5014
+:109040001EE03C916FD699F7A586290FEE3B990952
+:10905000C28FD9C8F19275905DCC9EE7F007FE44AF
+:10906000F9715D7AFC526A27FB338A78458DF0E30B
+:1090700000A0A8BE2C53FAE19689A7CCE7E3E3321F
+:10908000D55D12ED775837012409CDCB9D84F37D52
+:10909000C4EABD2D13E6750AF017D779AA2981EE27
+:1090A000035BA77468E8D7F417F1BCE1783CF28958
+:1090B000717B1D888C457912D9D353DE30CF13DEF6
+:1090C00030E23ACADB2FDEFDE958C40F56C1881ED4
+:1090D0006B775F5DDEF04CB11FFFCFE40D7B146D4D
+:1090E0001B3CEFCF7470FD4AE60D7BF87EC9786BB0
+:1090F0007CBEF0858C90CAF3FAC25B9E42BB7DB702
+:1091000089F261C6EF7EFD18FA35C79B5990E2CF10
+:1091100071FA43C4396909D2C9C54FCE6C798861E7
+:10912000BEF9CB1E7E1E36561FE8C91EA098499474
+:10913000DDB83653E8E7DF923D20F9759DB0AF3ECC
+:1091400056228F14E0FAF6E9EDDD9D5FDA22C7EFD3
+:1091500029DFA5ADFB7C17E98FAE08E7C7C4BF7652
+:1091600074F6776DF1B4E7507676134F5345FE9A57
+:10917000AA70D6C11C3CBF49C6D3D4D6011427332C
+:1091800075C5D342AC9B789A2AE2532B0C5A25F929
+:1091900069F699DCDC8EF612FF6A6C4DF5207FAB28
+:1091A0009B7BEE453C7AA13AC6BAF09C5FA3807FD8
+:1091B000F5D5C7D3DA33BB89A76D157ADB0785BA36
+:1091C0009011E0BA9571FEEB6F9371351DD9B59191
+:1091D000877368DECA4433CDFB83574DDBD03F3500
+:1091E00043C6CB5EE5FEB519222EF6C1C402F23F9E
+:1091F000F504E7194DB1718777059C2F594AC94F7E
+:109200007FFF2F26907F7E16FAF7FBA07FAB59F8E1
+:10921000EBB99FCFDDC4EF3170EF50E81E59441316
+:109220001DE9A476BA4F761EB0D18DC87AFD80357F
+:10923000DF81D78A4E417DC8DD086550FAD595AAF1
+:10924000DF05EDB61E4B20BFE20AA75BE4E7F1F8AD
+:10925000B57FB512E8C7FBA5FBE3FC8D3A0DFBB962
+:1092600094C9E57C5296B1DBFB281A0D224E22C62A
+:109270005BCA60DFE1A953F87385B89F301E1EB248
+:10928000BF4643BD19FD7B911C7E0FCD25A33685BE
+:10929000FCCEC90574DF5463627D5305AF279ABDC8
+:1092A000648978A9FEBB2A5748993B99F2A83345AF
+:1092B0005E621C9C6736C796E3E347F1E7E36630DE
+:1092C0005FFF8C3E979F1F3B8FFC16FABFB42A5F4F
+:1092D000EC8B87E2288D06F71FF2290ECBEF935A0D
+:1092E0009ACDE1A6CBE1CFDE8E72BA1710E885EBFE
+:1092F000718CCFBFF7779D0AD24BA383E3ED7F77C5
+:10930000DEF1F34DCB2AE07A8D83D36BE34A25C09F
+:10931000E1C5E77DB57E92E2AC6FD74FF281E2798D
+:109320003A944FDF117FF03F6C20BADB6BE1E75ED0
+:1093300025BFA28423B43F85BD7B232AD318573D84
+:10934000BB9CEE85DA58D53B09E3AE6326D9681D90
+:10935000B5AFF273D5358BC3B988D7B565E182FA5D
+:109360006EE08A03A892BF42BBE94EC6EF176A8A35
+:109370008D23C6C78757A768E3B346A0BDF441EB6A
+:10938000EBB8DFAD1692AFB58B234FA3FFC097E2CA
+:109390009B9405F871FE81E36315377D46FAFCC5A1
+:1093A0007DFDE93CE8F4C6D873716C756C7C923530
+:1093B0002593DF9DB5C4BEC7735B31DF5D16AFE497
+:1093C000FACD3AA36F00EA9F37DDC8F3313E99A387
+:1093D00063B8AF9F58F8FEFB1F4E14FCDA53102DF4
+:1093E0000FEA7BDC5F683708F302789EAC6C5F8322
+:1093F000FB0BFB5A2DF6F79397BE5380FB7BBEF514
+:109400003B05B8BFEB0CCD1AD24751BA6F21C2E36E
+:10941000F4CD5ED20F655EF0D5E25DC3B78C77D731
+:109420002A8F9BB3FE35798C7FD17E9357BFD2FBB9
+:109430002D245FF879E22EFFDD39BA57EDE2973A35
+:1094400005F9714FFDE50B3DCF65667ED4C34ACA71
+:10945000C2F45DC9DF750CF541A907C7CFFF4931DB
+:10946000FF9D599A09E5A0F4F75689BECD81CFB981
+:10947000BEBD5D217FAED9ED4F1A45F6D5CCE17A60
+:10948000E22FFF46E742589B62473B65CEF6A55464
+:109490007F61F70CAAD7994321B4C76AA01ECB2BD2
+:1094A00046C7E6791B77F27890B47F611E7AD4D7ED
+:1094B000129C1123E2672DEAD730C55A95FBBD6B8C
+:1094C0009DCCE367A80FC7DA8B32AEBBD1CBEFEDF3
+:1094D000D9D8A6D0FD5D69465F7E36EE6B5C7C77A1
+:1094E0007F96760EF14EC6E71F4CD30E22DD3A8DE5
+:1094F0002C97F2F90CF25C5AECB9CF9EF2E48E761E
+:10950000E2C195F4A8A9A42FFD9579495F7A072FA8
+:10951000CD243DEA4ED2AFE4FBCBF3E40231F1FCC3
+:1095200059E29CEE2C714E17F97E288EEF4797ABCF
+:10953000A3F2E442DDE53B44E5C9457F179D2717CB
+:109540008AE18F9C9FA4EB17501CBD0EE866D1B03A
+:109550002EBCAE66E26F7DE4033A37B4C3447EBAF4
+:109560006A91C75B57758AEC9F3A3C87C4E95BE315
+:10957000E7E9B97E550D7625E5330763F37D95EC74
+:109580006F57FF96ED7AF2C7DBB2A59DC8E95BAED7
+:109590004BAEA3BA4DE1F41837CF787B3ADEAF2E4D
+:1095A000EDE1ABE573EE6F79DDD7CAE706C7C1E140
+:1095B0005FE57397C527FA46923CDF427CE223774A
+:1095C000731ABA28659E74D33E9E273D566FD37892
+:1095D0003C54CFF325E2E3C2EEB114F7947168F383
+:1095E000CBFAC0B27C6AEFC17CB49A7D8994BF503B
+:1095F000E5AE223D3E3E1E3A97B58EC5ADF82B3BFB
+:1096000042E7DEFEBB7908DFCF4E74129F72B3FCD7
+:109610006BCC43B83BFB1AE2A1076D9FA7F8A2F001
+:10962000A56C101804837ACE379B2BF63F41E4AB30
+:1096300098553F73447DDFD3770BB2B93FF1A0C893
+:10964000935A939840F737B88CFC9C874BC7F3B973
+:1096500086667A17E2FCCD6EBE9F4FECF901C373AC
+:109660007B4F1882749F82BFC6E641B928FD58B26D
+:10967000FF76E15FBD5A3A5AF93FCC3F1E957473AD
+:10968000B5F1BCF5008328FA8AA7879EBEEB89BF97
+:109690006CCFF63EC1F1421B427190ABE44B09C561
+:1096A000C0B751EEEF34B9D11E41BF0CC9DBD5199B
+:1096B000D29EE7F742ACC921B9F88985DB27F2DCF5
+:1096C000945CFF2EB9FE6F496FB4A47BF764437FAF
+:1096D000A74B353A27B12291CB97C8B33C1F29FE3F
+:1096E000FC50BC5C91E75FE478BFFBBFCC578F7D3B
+:1096F0004B7C15E42CE91D3DC67D2FFBDECFEFC171
+:1097000029EBD044FE0D9DFB90F3AAEBE0797C673A
+:10971000C5FCE4FB90D07306E7681F215E9D7FCFF8
+:109720006CC6B86A7131E79FB55E1BC5256A833C7C
+:109730005FA77631233F823C273CDBE5FB1CF76FBC
+:10974000C5711BDD5F5BBB7B6B536FCA67F091BE5E
+:1097500078E13DFE3EDDE5FB02DBD52D0EC7C43FC3
+:109760004ABEF97C794531CD97FC004E53ECF9ABFC
+:109770008C1CCE6FE4332D47C217EC1DF8EE7C1520
+:10978000CF3FAF736AF652CA63E0FEF5047707F97C
+:10979000956A77929060940C8BF53FCB26BCA9DD3F
+:1097A000595A44F736042D45740FD19FF8BD5DE733
+:1097B0001FC80CE8B93F3E2967049E3B09DC8A7A42
+:1097C0006B1E8C832AEEF9D65B8BC8DF1847779225
+:1097D000DE3ACFDDFED01C6850BAE8719D81CB49DE
+:1097E00029DFFE91EDE6F110A7C8476C9BC066DA51
+:1097F000BACA36676C9EE6CEAC9BFF81FBF38F6CDA
+:1098000055C4D179DC3EDF0CD66CEFCBF1305FC4B0
+:10981000ED27887C0BE63777E559F4BE72DC5ECE27
+:10982000AF93EF8BB87DC297E27722EC46C28BC430
+:1098300026CE3718E005EAEDA3231D63F0BC5BDFFD
+:1098400096D06884572F043F9EA361E19F0FC5788F
+:10985000488A3A1AE3215B160D3B80715A7565C739
+:1098600077716BDCCDF632345967BBBC37E4107FBF
+:10987000A92F44FC2FFBA381E747AE4C2079DF9250
+:109880005B4DF991178E9B62CE23C53FFD6C990B02
+:10989000FD50BD9BDEA67844E24EA5DBBCD79FE61B
+:1098A000D844FEE43217FAB5129B3AFC23D14FF3A9
+:1098B000B0C2EF0085D92B2EF427A83AD43B66EC32
+:1098C000E6E7E567343BCACCC44F151ECF19ED243B
+:1098D0003EA9AEBC4D87769FBA94D17D7BF373B819
+:1098E0005FBC5F8B5D87FBFEDBAFF5DDC6E97C39D6
+:1098F0003A19573422B86A4C914398DA29E38B32EB
+:10990000CFAEA77BECA53C8AD7672FD363853CEA13
+:10991000D4E7E3F0B8A7EF247E4B7CFEAD81911E27
+:10992000F65BC54CE7DE245E37CAF3075F733F7111
+:109930009EC8DF39B5EABF86F07B02647C26C0EFA3
+:10994000713584976711BCC237FA71DD3B1DBADAF5
+:1099500041E45FABA57E56F27BF2F29AFA2C1B59DA
+:109960008C4F3B53600AA7F6CECB43BAF4031EF4E8
+:10997000EB060F6ECAE17952EACA04DA37752DDDBB
+:1099800010CE54471AED9BFA18DF9FEB73383C65F5
+:109990007C58FA4107E7F8D6603E70E739B545567E
+:1099A0007E4E4D9CAB4E5C74FC053CFFB545F8A368
+:1099B0000FBC3A907EDFE3D24A55413DF592A39227
+:1099C0007ECF6AA3D8D744B583D96DD1F87980F218
+:1099D000747BEFE3F986AA3837AEAE746E4578969D
+:1099E0003B7D948FFCDDC610FD04C6ABF6D314F7A7
+:1099F00003BD88CE079FDBA348BD28461E4ABB2D6A
+:109A0000DE1E7B51F2CDFF213D694F279FBE463BB5
+:109A10008BC5DA9B9DEDA5FD186F4FC47DDF93FECE
+:109A2000C3347F4CDECD11B1EF52BE670ADE28F39E
+:109A3000713ACF89B38005CF714C41A21CD1959763
+:109A4000C444BED27AC5EA417DA9A7BCA4CEBC213C
+:109A5000563F94FB37EBBF834F99D724F3962C984E
+:109A6000BF927279FE8A05F35752F07750F87973F6
+:109A7000997FD26070533E8BFF4146714965620504
+:109A8000F9FF92BD46C2BF8B2CB0017F07C03FD902
+:109A900046E7EAF19C13E27D447151BF632A34D951
+:109AA0005E87ED3BEF93AC64549FDC57CB403DCCDD
+:109AB00002F578CF75E739F399FCDEFDF8FC1599CE
+:109AC0004725E3CA99FD5F56D0CF8A6104CA67F87B
+:109AD000B1F82E9FF7D3F22337F18DB4069E2715E8
+:109AE000B99ED9D1CF5F26F98F39765FD729BE7C51
+:109AF000A4CF75567ECFC266E669D243B93DA7377B
+:109B0000EDE346E6DEAF2386DD4CBFDBF1BC53D38D
+:109B1000E7A676E1939C175BCFD77D11CFAD295D8A
+:109B2000E35D9CF3F75CD4AFCADA4C1C2FE3C6DFCD
+:109B3000D879CF4DC082F2C495CBF1C113A7EFCA3B
+:109B4000A72B5789C9FB93E3F7B43E899F57D2E30C
+:109B500025FEF5846FFE32B14F271248FF90F8764C
+:109B600060C90EBA4FB27D49909E172D4A508FE7BB
+:109B7000872D9169C81973F2B2EEC07B502E26462C
+:109B800072F11E95016EB717EF51B9981A3981E538
+:109B9000EB9FF8BE97EAFB45B6E0BD2A77E41DBB14
+:109BA00083EA713F33192BDA72E40EBF0DCFA9841B
+:109BB0009777A0DC2A8ECB8B89BBFF2141FC0E540A
+:109BC000BACD48FA64BA8813B272A1D763440BCAFB
+:109BD0000D19451417B431F7CE0EACCF36F17B22F8
+:109BE00018E03FD6F7CBE7F9158CAF9B650B7F37B5
+:109BF0000BFBE9771DF31DF47D271FDF6912F12EA2
+:109C00003EFED197785C52E6093366CF417DC8E6C7
+:109C1000663165797F0A53ED39785F4283F4278A8C
+:109C2000F22B09BE49B95172F9E8CD3F1944BF2F53
+:109C3000F3F2CFFA22DFBCC5187B3FB77C26BB39D5
+:109C40009FBC28EEA1BC2FC17777EE08FC7D9969F7
+:109C500063F14AE12929A54607E96FCFEA914FA5AB
+:109C60000AFC704CE6F373947B15FC5D17790F6466
+:109C7000AA4F253F01F3B5E851AEA69EF652FE610C
+:109C8000B539928BBFBFF396D95785F3BC5479F29F
+:109C90007E8A3F661E3D81F922470DCD6392508E2C
+:109CA000E48B7B3830C00BE5435979640F76F2873B
+:109CB0007E0AC547C74FE6E771C7B1A08AFB3CD60D
+:109CC000CECF878D2DCEF734C078E345BEC9D8639B
+:109CD000DE24E46F637F1056F93D2111353ABF430E
+:109CE0003E99CBE08EA6875BDD516586F755C7961A
+:109CF000BFE7892DDF31F2EBFED1E5C18AD680EBDB
+:109D00007C4511F76D007FE1EBE2798CBF12F6DC48
+:109D1000401733E7619EA553F1A3BD30705726C5A8
+:109D20006D768D64544EDB61DE668E5EFF5A1D8F4C
+:109D30006B0BBFBAFC7D2AAC4379FBF27B6904AFA5
+:109D4000341BF05B27711FC2B703826E0F083A2DD8
+:109D5000C9325B91FF1F30B837119E279ADDE8A703
+:109D6000DA9F68A4FB7F1BE6F3DFB75092CCCC08E8
+:109D7000FDEAA7F332B4633742BDBEC44CF92907EC
+:109D800044DE77C3832AF9B9B01EEF41D43F622580
+:109D90007F797952E1DD58AF4F32D2B98BFD8925F9
+:109DA0003E311EFD2EC1F64473087F2723FE1ED6CA
+:109DB000A3382F841BCCEB293E0FA2477D8991F459
+:109DC00070793E1FFAA1789E3ED34CE31D70D8F700
+:109DD00023DE357C449A1ED48F74633E99C4EFF21F
+:109DE000A491F4BB33407D7DA3EFD9D7A779DCFCE8
+:109DF0001C30FF3D95C2CEDF578161A11DBAD51938
+:109E0000D12D8F0FE648B83355C3F6194C96F9F9A2
+:109E1000B5B4CE72A94AF72D29B2BC94CA8F8B7AF9
+:109E2000796F6C6A1EE7534ADBEB7F43BCED9B0402
+:109E300070817DF224747F7EEAB4E0EF97EF5F8952
+:109E40000BFDFE0AAE7350D7FA0F383C2E6F54B993
+:109E50009B7D0920BEC5EFCB018BC78D7EB62BF74E
+:109E6000C7E12AD7A1CFE4F0EC5C474AF7EB48CD35
+:109E7000E3EB088A73E3F1F54A9EEEDB5E67B7F821
+:109E8000F72FAF332D769DDFE23CC3CAB7304F7D4D
+:109E90002ECCCFD6353FFAF9B812E49B1CFFC68909
+:109EA0007C6956189BE7C4467ACC5C5F8CCD6BBA54
+:109EB00045D9D488F2F57111377F5DD0D5A184FFE3
+:109EC000D517F5ADD7A715B413BFEDB5B411894BB0
+:109ED000F267C9FF2F659C2CC132C88101792067C8
+:109EE000EEEF7D741A76DEEE78BC2FCA2BE09BD79E
+:109EF000E58DB87C9E927E3BE70BF48B7424E937AA
+:109F00007EFE928ED8ED414A10DDCC42F474319E33
+:109F10008F0F7A09DD73CFDC395DEB03221F6BAE47
+:109F2000E7EB58EAA779DFE27894F2106FC9F7DD22
+:109F30009407FB3D65E8A774FF147355F6273B4D66
+:109F4000D1B4FF9BF3C58C7F7C2FF5FC78BDFE4A16
+:109F500079E9729EF1FC50CE4799B883F4F83AD073
+:109F6000E379DEBA42FCBEAE4AC7F9F06E85F4FA78
+:109F70005A903328A7E4BDCC3715581BF19ECDBDB0
+:109F800006EE4FF5BF6472C7DE4B159FBF2EEC89FE
+:109F9000C54CDA0BFC7E8B1A3BBF774AC89996FBFF
+:109FA0007ACB7BA9B83C043915732F55A53BF65ED7
+:109FB000AA1EEC05B00B483F63BD74C22EE072BA16
+:109FC000E57AB7DDCFC8FFCC7F2774AA51E88300BC
+:109FD0008BB4AE7BF3C00EA0FB001BF3F2C5BD64D7
+:109FE00001FEBB2C42FF8FF74717A5FB56209ECCE6
+:109FF0001CA4E5E24F04CD30727F33E0DBA60E8671
+:10A000006998F5DBF15ED95B59FD3BBA3E846F0F71
+:10A0100013BE0DFC94DF37DB856F8FE4A572B98426
+:10A0200042E64A741C71FA1EC7715B1CC13FE13DD8
+:10A03000F81BDB4C046F99E71A4FDF51F3396DE0E1
+:10A04000F371EAF5349F27BA9BCFD5E07D345EA546
+:10A05000338EDF3DE13F9E27491CD685FF8315DF08
+:10A060008B386E271D2CE776D765F3D6DB68BFEFFC
+:10A070009CCAE3727509D24ED6C667A4A11F928FFF
+:10A080007FE74A8E177756F2BCA4096D35148763B3
+:10A09000E53CAEE681FFD1EFFC08FE36D9596440BD
+:10A0A000D4FB2BBBDB807ECEC9E363E36F53CCB71D
+:10A0B00050BCEFCEC98698DF39957098227E477DD7
+:10A0C0004ADCEF9BC6C3253E6ED7C90FC47AB3F0F6
+:10A0D000777FE099CDF8399E0CF17B7447F33AE332
+:10A0E0007BFDAF31BE772CEF1AE27BED8608DD3BBE
+:10A0F000F15AEAEC4DF3816EFAFF7210DDDB7F73EB
+:10A10000DA9CED6BA1FCCCC6EBA8FC5ADA0F171E4B
+:10A11000C5FA2D05542ED77D3A0DE9A0B064EA3872
+:10A12000FC9D83760BEFC765F5B5E0EFDFB886F4ED
+:10A130001E86F9C8E5C608B5BB6D68CD70CCAF2AE0
+:10A14000B7F2F291A2FF1846E5DEA23CEC95EBB027
+:10A15000DCAE7C3AADBBF8E0C0422584BF73579EAD
+:10A16000CCDB8F1FF66C26FA8BCACB7879A0A7744C
+:10A17000651FACD77D36AD3B7DC428EC21A95F7B44
+:10A1800005BDEFD24E36E2B944AF4DF1E0F913EF21
+:10A19000C893FC3E3A33CF53F93F722300BD008091
+:10A1A000000000001F8B080000000000000BE57D90
+:10A1B00009789445D270BFF3CE9564924C0E20215D
+:10A1C000102609840492300987288703048C0A38F2
+:10A1D0005C028AF08633E42011748DBBEC6620802B
+:10A1E000E8A28615151574404070118302A206BEC0
+:10A1F000E1505151E3B1AEE82E7FA2ACDC1283AE48
+:10A20000B8EBAE7F55757766DE37C902FBFDDFF32D
+:10A21000ECF7FCF8EC76FAEDABBAAABAAABABABA7D
+:10A22000C7EBC935CFCA626CB847F1F8211DE158B8
+:10A230009268EFC7D858CDDA4F5518733A5296390D
+:10A24000E3198B1E38AC3F7341B99D59582A6337C7
+:10A25000A468E1AE0E8C4DB9E6DBE4289531E62822
+:10A26000ECE98D849405181BC0D838FC13EA8FB331
+:10A270003B026A0EFC9D6F39D790C1E8DFCFD03E1C
+:10A280005BF1385DFD31D725E6EBDE8C61173F5F72
+:10A290004FFD76C0EF53067D9B6CC68F09BCDF0B6C
+:10A2A00016C74A253AD8FF4DA27FE661DDE33B326F
+:10A2B000A688FC4D72BC0CFD78F84F817A9D98F809
+:10A2C000BBEEAD1F15ACB7A25661690005F351BADC
+:10A2D0009ED528084CB6A2A5E3FCACA67A177EEF63
+:10A2E000A6B87B39119E816EBB37BB35DC12BEAE82
+:10A2F00026F890D71A2EFC67867C1293FF14A7B31A
+:10A30000238ECBCBA19D87C506E182F107107E5637
+:10A310007078D62B1594624306ED1688760BE47C94
+:10A32000F7EAE73B209CF9C2008E04E65EA962BB17
+:10A33000F8DC5EFF0AEEF2F0A81CD687B18976EF52
+:10A34000833698C3A4985944E7C9CCB73B06E6FFC7
+:10A3500062845680F0A826DFBE0698D41CE6B1229F
+:10A360005E808E37723A72BA48B88CF86881D388AA
+:10A370001703DC463C04E9539F886922ABA07CCBE1
+:10A38000BC0CF3A9461E047E6DCAB5F937E22066FF
+:10A39000F81FF0F3D1C274FF034A10AEA30ACB300A
+:10A3A000433D9F12EEDE9CC2D80F61307FF81E2F16
+:10A3B000F03068E62FC6B2A8D6F056DA79BD7BC277
+:10A3C000A336627A7D7AF8325334B64FF663FDF8DD
+:10A3D00070487382F0FF60629A1DE0BD47AD25FAB8
+:10A3E00075614D4BCC29413E7BD80593EE8F7C297E
+:10A3F000E7E353904E569332C3EB8039E1BFEB83D2
+:10A40000E9C32E4068078E2F3BC0354370D38C06BE
+:10A41000A55141785D290E5C2F33EC6AC096D39A22
+:10A420005F704676A0D3CCCBF00FAB799C61BBE1DB
+:10A43000765E6F26F68FF5168FF484D69B89E3E05F
+:10A44000B82BE1BB3DF85D01BC27C5B6A60FCC8F8C
+:10A45000E01F5339C27B220EF06515F4BA3792E83B
+:10A4600035E6DE61F45D199FA134C0FC4714B828BD
+:10A470008DEDF7A1996513DDA6D46605E9A876D41C
+:10A480009EC275CACC0DFDC7C1BCDFEBFF5CAE063A
+:10A49000E5C74DAC08EB19F1F75C107F57B48EDAC5
+:10A4A00083FFF508EF36E4FBF34AFD002CCCEFEC1C
+:10A4B000243A32A6A520FD629C29C36210DF3FC169
+:10A4C000B880EF8958047CB0A7A3B613E19DCCBC3B
+:10A4D00023CD30DFD802CDA239683813C2B3D0C93A
+:10A4E000E119A93A886F9BB72B7E1BD4CBF7643E4A
+:10A4F0003E18F2E5472CCC0FE5CD8CF375F33AD539
+:10A50000EF037E9AF7F6CB036005B2AF041FF75C4A
+:10A510006B622E490FF85FA63F9CB93282F9DE5B71
+:10A520006375F9ECDACEBAFA7DF6A6EACA7303BD12
+:10A5300074E57D8FE4E9F2FDEBAFD3D5BFE6B3E17F
+:10A54000BAFCB50D37E9EA0F3A355E971FD2749B16
+:10A55000AE7E7518ACAF3E886E4F7D06E065B6A046
+:10A56000D3F59766EADA9D8D1A7504D7DDEC55F3BD
+:10A5700046E3BA1BC64A74FDB01ACB97C89715F0CC
+:10A580001FD2732EF34607005F2359D39B4980BF28
+:10A59000057EC58D789BB796D793EDE6EFBD7378B2
+:10A5A0000CA67EFDF712660EE6A19FCA3F6D78E706
+:10A5B000704879BEB3D084FC77DE1519FF7504228C
+:10A5C000825DF3B3DA267DDD01A4DF27AADB069FD7
+:10A5D00016BEADD23A58F882E267D06F3AEB118DD1
+:10A5E000F9F2232AF303FD4FB28AC70643FA4395D3
+:10A5F000FF9DC33D82F8B125E8E91CE6D2D339229C
+:10A60000434FE748B79ECED103F5748EF1E8E91CBD
+:10A6100057A0A77307AF9ECE9DA6E8E99CA8E9E9DD
+:10A620009C54A4A773D70A3D9DBB55EAE999E22B38
+:10A63000D6D3CF407F299FD3562ED4D56BE1036F5D
+:10A64000D1684C7BD4FC52D76F895A6A65A6203FEB
+:10A65000F8E03FE4879E8CB90380E705408780AB34
+:10A66000351F14D5AD5E91F46FF041760AD0BF77F7
+:10A6700008FDD569D15A1BF25CA692AEA04FFBA68D
+:10A68000F4273B6800A6537A821D04728379DBB6F7
+:10A6900083A4FC0AB53BCC0382FAAA3DB9D64ACFC3
+:10A6A0008E95FAA91D3DEBEA1A94838090638CDBAA
+:10A6B000018CAD32211C53055F1F0CE77C79118B97
+:10A6C000AE857A506720C0750CE186718E85F73EA5
+:10A6D0008CEBF436566BC1FEA7B17A4AA7B3264A73
+:10A6E00035E624BB622673533A9B79297DCFAE4D64
+:10A6F0004901B9596A6F188076C95F0B3F3CAE209B
+:10A700003047E310D876F12AE5F5C7F827D47B3037
+:10A71000C5AB215EF3EDAEBB1E854F07514FA0FCCC
+:10A720001D1D47F032B3377B7C765BFD2C25F9FE8F
+:10A73000BAA26928777D8976F766985BEF24664F21
+:10A74000443D97E04F1D0FF4294FD1EB975E8227D0
+:10A750005EE85CBB10ED28C6FCB1A81FAE76DC5FDE
+:10A76000A5787E8170CBFA979BAFD55A7B27C2D94B
+:10A7700054E6706F04FEFC44D0E3D95B6D01352ACA
+:10A78000C8479F454C7FB303D0EDEE086D19F1DB50
+:10A79000E41B57605E3918E75A08F05D28047C73A3
+:10A7A000FCAFC4F252BBD6AD234CF17C57AD67343D
+:10A7B000E2DFCBF10F7F647BDB849FC33342E1E3B5
+:10A7C000BF1EA1ADC67E0E9AEA93DD880F73FD0011
+:10A7D000B24B1D1DA89FF3568E97F6F0303CA2EBAE
+:10A7E000349CD76C9BCD8DFB93E10AA7EB89B819FC
+:10A7F000D3CBE1CF39266FC780AA83FB1982DB59FF
+:10A80000D82D11F8E6BC45C06DEF20F0EECAC27538
+:10A81000D51EDCD5D83FDA89BF56FC6827D23FC8A1
+:10A82000BFE28BF13F00799BE9E22713D07EC93666
+:10A83000B93742D1BA70E81AF8FD0381EFF516C8AE
+:10A84000C7D2F795F83D219CB74F78CCE4AF86F698
+:10A85000DEE1AF129D9E5DE0A0F91432971517D985
+:10A860002C615FFF65D8DFF735003DF6A5687B7189
+:10A870001E33E24CC99F101C5A6FB477D8E02BE30B
+:10A880007FB94EC73BF914E608BC4D601E5A77935A
+:10A890009866C1713FFAC6EA41F9F991902760FFC5
+:10A8A000D3F7A9CC4FE9ED2C40F5EF600D94FF30C4
+:10A8B00022A76B25C037EEF19E3D50BE86E0FD7DA0
+:10A8C000BE5EB519F19C5F4E7642BCAFE97045FCA7
+:10A8D0003B4EF00BACD74FB11F58AFFD725343D670
+:10A8E0004D3EE7176676F6F857EBA6BE99EB0B10D0
+:10A8F0008C8E4498FF0D828437784A484FA09D156E
+:10A900000FF8AF77A96467150C6B3423FC5BBEE5C9
+:10A9100072ECAD252CD207E56F0D5319D26BECDA32
+:10A9200051A7B1DD511688EF07F5475ED20E47C338
+:10A93000FCC7827C0789CC0ABA809E08D14B372598
+:10A94000ACCE473BE2A6EEFAEF37B31A15F1373A31
+:10A950004BAF57C6A25E91F560BC038887D8D6FA84
+:10A96000E547A95F7AB15E57A35F169A3C2C95EC38
+:10A97000549715F97EA69979DA5A6F937B2AC29E6D
+:10A98000E576CB2D62ECE6D117AD1760BE0353B56B
+:10A9900008EC67E198BF4C47790CFBACF7FAA21EB4
+:10A9A0007D5F650F40F99755807150AE27AAECCCBA
+:10A9B0000306CED7554ECA9FAA4AA0F44C958BD217
+:10A9C00073551954FE4D959BF25353BDF1D8EFCCFE
+:10A9D00095DF9AD18EBA2F4CD28FC3B148F0EF7D5C
+:10A9E000617C9FB52872D1678530EE225280A0AF7E
+:10A9F0006B6B46A1D955BCB7F64D4CE1BBEAC0F232
+:10AA0000D58A1BF5D39CC3DA0A649F79471BC6A27B
+:10AA1000D8E9FF87131D116F659714A6C1523AD06C
+:10AA2000C39386E39FAC1A48709DAEF2105C9EBA49
+:10AA3000C637E3A0FDD9AA02CA2F4CF566A6764018
+:10AA400075FBAD15DB8FD9DE684E82F2911EC58392
+:10AA5000EB7BA887F9FD40BFB516AE2FD682BE406E
+:10AA6000FE19963D7EFD5D0CE5B9D617C799143BDE
+:10AA70006B641CF2D5C04233D69BFC13D85C2941D1
+:10AA8000FEBEDC3A39BF5F21FC9CDF1F43F89078A3
+:10AA90002A13F43ABFA7F72D83A0DFFD6047AA0071
+:10AAA0005FF32513C1D7FC59B81F8D0463FB85BB29
+:10AAB000D33A3107CE131ADB30DFBB13033A9C7D48
+:10AAC000E19E04A44786623655825C381B5BFBD747
+:10AAD000CF51EEFD99CB3DC66ABF7E12E562970469
+:10AAE000F70390FBC602FB34DAD75444A05E5C60E7
+:10AAF000651ACF6BBD317F369CD1FE76C08EA4E146
+:10AB0000B89E703C57CFA05C4BDFF178EAAF5CC1D8
+:10AB1000F96E79E189E6D75C58EE27BEDCB6637D35
+:10AB2000E7A72057BA737938C2F53ADA19B04E5E02
+:10AB30005F1D41F2EB758BFB7825CAEDF50EF766CC
+:10AB4000A8F7DC43F77EB917D307CBF2EE45FE48F2
+:10AB50008DA57E66FF6E7E2F6C0F7A9C25C2BC7E13
+:10AB6000FF8A120843FFCB9A034B1361BC3EEB1ADA
+:10AB70004D9D21CDDDA45463DABB6BC111D49F156B
+:10AB8000A92E6ADF777B8A8AF661AFCEFECFAF2728
+:10AB9000FDAED7FB596BBE1DDE9905F57F2FA5F6DF
+:10ABA000CC12A0EF7D5D3FCDE3FBBE1AEA6777DDF7
+:10ABB000848F6F67380FB02C10EE422BF92570BAD6
+:10ABC00016C89FDF95B601FD177B4CBE0DA48F669E
+:10ABD00072FBE3BCD7F704F24D19D4F741BE2CD772
+:10ABE00017751D9497FDB9BB1B3884757DFA8602D5
+:10ABF000C4C7825D8F8EEA0CF5CE0F666E05402FBE
+:10AC0000DA7D7114B6635DC156C67E765577BC0D8C
+:10AC1000DAFD366B787FE413AF5A4BE3B0723ECE69
+:10AC2000E3428FB1861CF20B904A817ABF85CFF840
+:10AC30003DB62EE600F76D71FA94D72D4941FF4AD3
+:10AC40003FCDEE56711DA4F8122B1C41BD08FAEC45
+:10AC500077B87E12ADA25FE78464EF55E833ABD0DE
+:10AC60004FB2BFC7ADCC1716CBED6005F5AD95EB78
+:10AC7000E1CD202F905FA51E867137A6F2F664FF06
+:10AC80002681D2CD0538931EB7F949D75FE1F84642
+:10AC9000BF99B443A6C455EF6B40FF4E84B603C7BB
+:10ACA000917E326676BBD0CE5916E1793195ECA80B
+:10ACB000A6649C03E8C997B1DE0215ECAAB410BBE8
+:10ACC000CA7E657AF2C508CFABD8FE4AEB1BE5E831
+:10ACD000A2EF4D2C17F860D1A336DA77560BFF415F
+:10ACE000B5F06755470EB0E3FA67874DA56F82FE52
+:10ACF0001CC27B68E97751641EC9876AC6DAC4DB67
+:10AD00007E58D71AC89100E8010DD6F7D04B4D2ACE
+:10AD1000E7FBFA43D1FD507E324FA40BF7F526A690
+:10AD200085E847633F40B76338CF612C8269217A59
+:10AD3000D0C362ACB87E9923F6DF9AFF60413F39F9
+:10AD40008FC1C27F37B8F9B30894838BBECF237904
+:10AD5000D8DEFCF689F9FD17CE0F526F4FEF39841C
+:10AD600073C8774E33CE7388795C32DA2D007F3327
+:10AD70007E1FFA9D490FFF4FE1BAFC95CEE36E8529
+:10AD8000F94CB83EBFB5FA717DD6017FE37AAE9B30
+:10AD90009FE54739B007D603FAF17DE3AD64B7D636
+:10ADA00009BF685D0727F98B5EB7F0BC6FAA681F03
+:10ADB000C6482FD44DED4CED3BDB2ADECDC6FEABB5
+:10ADC00023487ED659FC2B53B1FF5FC7B97D402F76
+:10ADD000D5FEECFA137D61FFE037F92CC82F96C041
+:10ADE000ED2AF6F7AD95E1786B620249E5507FCD2B
+:10ADF000FCCE54FF33308DD01F37C8649A31CE81DA
+:10AE0000E59EC458C8EFF9A74A7A604D2EE41D2488
+:10AE1000C7C9BFB7669C27313C1ED38E26824765C3
+:10AE200015F43D85B7FBDCC2EBDD26E8774CD00797
+:10AE3000D639C9016D6C8419F9F8DAB49959696485
+:10AE4000C778121580E7C9D93D18CAD1DB8A6F4C83
+:10AE500021BE117ECE298206B23F26FCA493F8675C
+:10AE60003675CEE630A4E7A4A230F2837E56B43421
+:10AE7000D205ED2769C2FF3951EF17BD36CD43E347
+:10AE800096D566A69D08E1EB9936901BD0FF43E16D
+:10AE90005ADF34E4C7BDB954BE178C959F615D7D00
+:10AEA00039BBC70EF253CC96FBC2C02CA4EBFE26D6
+:10AEB0003BC3FD467BFC508D74807EBB215DE2046C
+:10AEC000BF22FDA784F37D8B19F805F2D5B599B49F
+:10AED0006F79C6C23C0AD26BB78DE85F30DEEE21D7
+:10AEE0007FE294F00D36289F21E459F59470FA5EC4
+:10AEF000BD2FD26F52683F4479DF4E0BB52BB5FAA8
+:10AF0000B76D817E4AF76792BED96315E3BE16C15D
+:10AF1000CBA33C29CBFB617927E283D72DAE682AEE
+:10AF20007F5B65541E1E488F013CC6856913111F47
+:10AF30009D6D406707F6CBBF1F17FC751CBA45FA1D
+:10AF4000F92A22A95F5AFA90D7AABB6E447A6A56A8
+:10AF50005ECE7EA952F971A727710EE48F57241196
+:10AF60005CD26F74DC6B25BE3F5EAA90FDF3A74AEE
+:10AF700035600DF5DB8FDF7A7F3AB4FB6ABF85FC65
+:10AF800072D31E2E398ADFA72D2D23FFE2B4E2C52E
+:10AF9000742EF0CDE2AF06AC85F9342CFD22590BAE
+:10AFA000F1334F2B855621EBF937699E32E4832725
+:10AFB000D3B40A9C5F7956C35CB497BFB1D63F8DBA
+:10AFC000F67F7ABCB608BF5F78F5E4166E4737A502
+:10AFD000A39E5860E67C22F56DB9E0C35EDDB57BCB
+:10AFE000B13EE06D3AEA9588AC7A2EFF165F99FC87
+:10AFF0003F53B7798F02E39484D72DA054F5E760CF
+:10B000003F67954094924678D4705D9D7306A21078
+:10B01000FF9A89DB6D255BF5F3C27F789E55827FB1
+:10B0200040BB925AD51386EB80F9AD087F09B30671
+:10B03000EBA704E905FD10BD98E34FD37F05742805
+:10B04000DE969987FB859298BD0F0DA27AD04EAE01
+:10B0500017B5755ECEA7353C7C7EE7C43A38075FEE
+:10B060002CC82FDB6D72DF4EE37FF36A271ABFA374
+:10B070005827DF28825FB78571BE72C3BC10CE1718
+:10B08000395F3D26E5E436DE4F499CCF8472A9A4A2
+:10B09000CA497C25E512C042EBEBEC8E246A27E519
+:10B0A00018F33246F577246EE4F69BD8BF22C050E1
+:10B0B000BFF8F77C1CCCA33C3FF37C921C97EC6759
+:10B0C000A33E36CE7B7F9A89EC2DD0D39DFED5FE54
+:10B0D0002F2361D6FAD97D43E613691572C19D30DD
+:10B0E0002E1BCF0BACBA7EBF89B4CEF038F0DC405B
+:10B0F000FF5DF6F74E1ADF1F7633D0B9B3DA74C0AE
+:10B1000086EBF059467AC308C787A2DDF3CFB7D0E4
+:10B110005515FE71E692FCE4E2F63CD1EF9855D26B
+:10B12000EFAE2490C72588ABD4201EF7E46A49A867
+:10B1300037BE11E73D7B62209F85F614A78BCC4B71
+:10B140007A18F972E9B1B94978BEF4CF34EEB73361
+:10B15000E27B09E015CBAB2DB05FC9C27DEB914717
+:10B160004EF408CEE7EB2A8F6776487EEEDA5C3B3A
+:10B17000AEC779EB72ED3343E851BDB5EF1117E07F
+:10B18000FDDC56B31BC57BB5D9FF10DAE9D55BD51D
+:10B190005AE42328B723BECF390EBE8FF5E6AE8B17
+:10B1A000C9433B5CB69FB776A46776081D7A6FD516
+:10B1B000D325BB569FEFB3579FB7776734BFAB6DAF
+:10B1C000971BD0E7FB1ED1E75913506F00DA039CA1
+:10B1D0006EAF0C741F7101DDBAF955377EEAE618BF
+:10B1E0003F610CDA11EB54770F28EFB6D87B33DAD6
+:10B1F00015A7D6CD7123D98B54DF825F014D8BBE4D
+:10B20000187504F5EA5956FBE918A0CBDCBAD556F7
+:10B21000B30BE7ADE7F73D26C1BFCF737FDC7CBF43
+:10B22000BEBCB55C5822FD1819A1FC65E40318F7F3
+:10B23000560F00545AF9F12328178A4603E3A31E38
+:10B24000AF5D6D45FBEFF2E3F8B87DE9F0B8101F94
+:10B25000850379D9759523D857B0EED8AA0F472121
+:10B26000DC85BF55C8FE287CB9E761E4AFC69D53B5
+:10B270006FA2F4D6029ABFF4FBCDAB530291907744
+:10B280000E74ED6D807673FCDC7F3173992D280F81
+:10B29000199E7B19E05813520EF0CFDB7BE0473C40
+:10B2A000172E5AA76F371FE434EA9FE24D3FDB4267
+:10B2B000BFCBFDE875751B549CF71C01BFD49FCC18
+:10B2C0003794CE1DAEE34DD809FC3FD03BBFEEA86E
+:10B2D0008DEEDE3FA847AF5BC3DB83D82DC47997E3
+:10B2E00039AC2E9C77999D0522009E2391560FC65E
+:10B2F000955C5C1B497EB7B936B057F3286518B723
+:10B30000008298CEBFBEFE4025BBA72C8ED3BDECDD
+:10B310001985F66965E82CC5FCB33C3F9F05683E7E
+:10B32000C82F9ED079FAF57956C3F777A5E6C00104
+:10B33000C44B316BE0FB33A0A727E4FCBA14E6F959
+:10B34000592CDA6F86F6CCADD1B99C83DB63E57BF3
+:10B350007FB68596CB7DA6DC074B7FF033E9DE70A8
+:10B360001CC722ECE635F77BD211DEE5164F3AE238
+:10B37000C1B73A8CF6FBB76DE0FA6B4D0CD8B1F162
+:10B38000643F933D7E9BC2ED733695CBC341A69738
+:10B3900002A86F9A1E8D716F74517DD2636B1ECCA3
+:10B3A000E4F6FF3F55B2879A56F3388835B91C7FCB
+:10B3B0006B1ECCE6F6BFD47B1D18F5D7DADEF6A4FB
+:10B3C000A31F823DC2E1FA1CA714625FE776D21E7A
+:10B3D000E81E323F6997B3A22B3B9FD82CE2329AEA
+:10B3E0005687F9F17CE284E27DD31462DF3ED59D7D
+:10B3F000EB8901C33D5B443D3AC7986D1AF7C0F530
+:10B4000000D7ECC74C2EF4A7B5E0DBE34947FD7944
+:10B410006275581EF2D980E1DCBF743C97CBFD8881
+:10B420007E8CE29B36897E377537E9D28470E03FA7
+:10B43000E8E7C448EEDF8EECE725BFDE661797FB32
+:10B44000C679D48A7E665BBDEF0C69031E891796A8
+:10B45000CFED8E13772A1B395C406FC80FF85D184B
+:10B46000F9034F08BD24F10B7C43710C526EC5B437
+:10B47000F08B7F5B18F0CB6A0BE703B96F0BE1171A
+:10B4800041FFAE44DFDB047DD98361825F4CEC6F0A
+:10B4900088C7914ECE0F57B9FF027A1F417A1BF72A
+:10B4A0006192DECCECEFFFAFCE51CA5E79618F0FB7
+:10B4B000EC8CE2171F8D6250EFB4B9A6A31BDA978C
+:10B4C0006E5E1EE581F494D917E584F14FFBD50239
+:10B4D0007F1BF8B6F690FE688F430939F73CF3FC02
+:10B4E0006FC7E23CFFBAD9E2449150BED546FBB1EA
+:10B4F00005BBE693BD0EF9469EBFEF5B3C072DDF13
+:10B50000ABF7B7173FF7684717E1DB97644AC034DA
+:10B5100090C4205DB0C9D2722E0CC380FDDDB40290
+:10B52000E133B647382E01BDCB6BD5426B74EBF2DD
+:10B5300072215FCA77FDF65BF41B96EFBAF124CA5D
+:10B54000FB72839FBF489C7718FDFC7FEDAE3F47A1
+:10B5500006FC50DC800FE0EA41ECC2FDC4D5DB1EE6
+:10B56000CF6944FB61D3BB514A56D0DF2FCF419AFC
+:10B570006B673D83FED3F6D6E537C2DF1BA41B976E
+:10B580005FAEBD0A0F9AABE369A925103508F77BBA
+:10B590001B2C64FF96BEF0EC962791CF8ED948BF46
+:10B5A00097BCF0C6A7D7A1FDBCD3123F9A4FC3A149
+:10B5B00084C4D994BBB83F4ED2A7F8E537ACAE6C83
+:10B5C000FE7D716C904E253B0F5831DEC788CF1140
+:10B5D000B507AC0D8E36E855DB388AFC50DB7EB003
+:10B5E000E2FA38BD5F619D525AB72FDAF04614DA9D
+:10B5F000678827D44F926E2D7434D487FEC7BED689
+:10B600008FEA39719F72393A7E2AECACB2572259CF
+:10B610000CC051F4B9CD3F1AE9BB635114CEE7A475
+:10B62000B982F3FDFAE51DD1DE2BB2F83A3A29E5ED
+:10B63000DF8B9EBE9BF8719E52D1D19945FC9E68CE
+:10B64000225BC29788F39CB36E12CD732ED3881FF2
+:10B650008BD6AB5E3FA4DF9B59C1CE36D6CD52B15F
+:10B660006E4E6E04E2C23C4F8A782BDF47AAD84761
+:10B67000DF49FAFC6E3167C61652FE7B61CF4DEC96
+:10B68000D1729E6D0FDD87966FBAAF1EE974A6ABBF
+:10B69000A713C20978F009BC293F43BFEA87233BBF
+:10B6A000713A3117C623503BD0AB23F03BD6AFB72E
+:10B6B00078D0CF1ED24EEC13F9F87789F101EE70F5
+:10B6C000DC079FECD8763CD7CE16B9C0EA43E3B985
+:10B6D000DA95039BEE27FEFAEE132E6716F8C715D0
+:10B6E0005079BD25D009CBFD07262A24276C2CD004
+:10B6F000D63ADF6411EB5C5F0E709A9550FCEEE772
+:10B70000F6A9E497B960970542EC8420FF5883DFDF
+:10B7100069FEBF13F86EA0F33979AE374FC807E35F
+:10B72000FC8DF262718FB6E34ED8BAB6CF938272B7
+:10B73000C247E396827E477BA4F4988DEC88D217AB
+:10B740002C5EC4D3D9ED873EBD0DF7B7B5725DEB66
+:10B75000E5B0715D17BDD4BFCD757D76556EDBEB61
+:10B760001ABEB7B9AE572924EFFEBB7218341FF9C1
+:10B77000252EB77EE7B523879F33E0F57B96153DF1
+:10B78000080B9D85DD884E06FC4ABC1AE5EA1014BC
+:10B79000921D5ACB5586211A21F8947894FCCA98A8
+:10B7A00046E3B4F0B5E45BC9D72D7C6B9CB71E9F14
+:10B7B000C6F2F9487B80C7FBAA85EC85D23A1E6F9A
+:10B7C00008ED283EAE1CFDF354BBE6CDA4F8D0BC7A
+:10B7D000DF90AF35D4F718F25E437DCD90AFD0D572
+:10B7E0002FDD7BC8CAF70F015D3D5BE5CDB41F6956
+:10B7F0006D67F8F9B9D3AE6FAD3EE48F2E4D569418
+:10B800009396A5CC1709ED9BF6A964F75C703545B6
+:10B81000A1DDB23C8CDB75179C221FC3F34D1DAC20
+:10B820002B504ECAEF4D61DC0F73C1DB141513B200
+:10B830009F6FAC53A3D0FFDBE067056DC7AB54131C
+:10B840005E1B587BE5DCBEBB10CEFD0D17C2B9BF39
+:10B8500061A4EA48AE443F6C0D8F0B9CBD6472142A
+:10B86000C555D4A5DD3205BECF795BE561E03E8FDD
+:10B8700019E319667152B253CC47F181B3EA785C8F
+:10B88000C3EC557A3ACF756CA2F8B7EFD9624AE7A4
+:10B89000AED1C72314B355C46745EB0CDFEB6EA6DE
+:10B8A00075526C58279AF00F1BD789235DC43DE66B
+:10B8B000B25C5DDCA390E723D5AC5BA6003D2E1CFB
+:10B8C00051990DF2CD752A5BD18FC7B9E2F9136E8C
+:10B8D0004870FD2D80F58A7693C4D7395C473DDBEF
+:10B8E000B75FCEEDFEF3805F21DFECF92207CF8555
+:10B8F000CFED3996FE3AE65FF963F217AC75FD11AC
+:10B90000FB7F9C8E72FAC27E1B437EBFB0FFAD648C
+:10B91000F4475E78CD46FBEC0B4B6DDCCFBD3FD2E0
+:10B920008F2AE642576E1757EFFB21A781F4F232B8
+:10B93000A2DF35E9566E5FD5FDFD38FAD39BEB608B
+:10B940005628F7F747D07A2A7F2D8CFCCC17F6FDC6
+:10B950003020D43FF7DF9D8F3C4FBF10C9A6BC8479
+:10B960007C1CC3F705E5AF5FFB2C9E2F97ED3A607B
+:10B970009D05E523FEEB1F3928572FBCC4EDA96FA9
+:10B980002C0D4FA38F73F896A8472C89E8E783CE38
+:10B990003A33F6C596B1137C596DE185E3E102E0D7
+:10B9A00001E7057829427DD01E3EA6223E3AFC27BB
+:10B9B000E2E3DBE95CBE5DC3F03C3A8817C5C3BF78
+:10B9C00047FAED0ACD9F7FDFFF430ECA9FCBCDF72D
+:10B9D0009EFFCFE6FBE87FEC7C39BF774D77119C6B
+:10B9E00046BE6FCDD7AFFC82F23B22DD04EF15AE31
+:10B9F000F7DDFFB1EBFD7F86DE1FFFC7CEF772F4E8
+:10BA00007E5BD03BD289E79917F6FD23995DC5BCD3
+:10BA10009BFF97CE5BDAF1C355F7915CA8FF2EAB85
+:10BA2000FDC49D42D6489B7648B7609C1FED9F465B
+:10BA300030AEA747D84BC8FE1CD1E541B297AB59F1
+:10BA40001E9D5FF8BAA874AE4341208087B712727A
+:10BA5000E95E153307BA2C82FCF0A4328AFF32EE7D
+:10BA60002B47848F2940FBF4D012800BFA391469DC
+:10BA700072E219757E177E4F09D2464CDF4CBE9993
+:10BA8000E2F8F31DFAFDD5CD867DD28D2E7D7901AC
+:10BA90007B291ECFED0AB22C745F6214D60FD957E2
+:10BAA000FE23DD4978B991D52C733AAE1E4FB70805
+:10BAB0003CB5C6C3BFC65B2B3C897DB459D437E2C5
+:10BAC000CDEC78A01EDB9919EC8BF97C693F2DF742
+:10BAD000C597C32713FB6DB3185AE2D7DC859FCFF8
+:10BAE00086F44B789178BF5A7C4B3A19F12EF12BA2
+:10BAF000F166A4432AC6F8F50FE2BF8B39D78CEB69
+:10BB00006E88B0EBF3CD313CDFA55EF5D27AF473ED
+:10BB10003EFFCE6D46BB7E982386E2428DF71166CE
+:10BB20000E8C19A0C07C93CCCC67837D289EBD91E0
+:10BB3000DFF57EB37F690A8EC3FDBB5DCDDC7F0D73
+:10BB4000ABDB179E47F53D56C8173E328F79A07E76
+:10BB50006112732BBC3E8B8EA5F038A6C6F27B9B80
+:10BB6000D8AE309AF75BD889F997727A125DD0ED2A
+:10BB700083FE0DE8D7638AE5EDA3F2A8BDCFC4DB51
+:10BB80007BCC90764BE3710A4DCBB95FBEF0BEAE75
+:10BB9000E9283F460FD7FB99DFEAC9FDD232ED9B7A
+:10BBA000E1227CA9267702DD8F589649FB2335DCFC
+:10BBB0005BB61BFDF43B789C4EE18A3BC6F447F82C
+:10BBC00076C4B911BC3363770EE0F5A7DEFD07F844
+:10BBD000AE6D0DA3EF9333B4A53D311E40714DDF23
+:10BBE0000D1F664E3A644D8021B4DA71E7D14F38AB
+:10BBF000D6B7F37D3C9F1C3B51A5FA63198FF764C0
+:10BC0000CB601C281FE3FBD69C00FD8D814D079661
+:10BC100037863993EF04F80B857FF8215C2F086F86
+:10BC200038D35E72205C5DD353E1FB18D676BCF14D
+:10BC300051597FB8B20ECF99BA8DE0FE7B591FFBE8
+:10BC4000C17E3FEAC9FD514F8854E601AF547FF6EB
+:10BC50004A5B631AEE7F565A023D2175F41ABEBE46
+:10BC600027E06F742A1BB516F17EAFCA3612BC4DA1
+:10BC70008574AE1099E1423A68C0D274BE5293E224
+:10BC800042BF58E3B0DA009E27343E91E2AE76110F
+:10BC900095291E48EEB71A8705BAA31FBF29979F9B
+:10BCA0004B1C773644E27E7196C3CEEF498AB8A228
+:10BCB00039E25E4CB7EA8607AFC17DE8A32A9DD77B
+:10BCC000CC7994DFF7FA8BC3EE5770DFB646DCD73A
+:10BCD0005CA58F23624E37F98166D50CB3E27E7383
+:10BCE000B6C363C579FE31437B1DE725EF17F642E6
+:10BCF00022409785358514AFA246C1BAC3756276D6
+:10BD000045E13ED81887542EE28E64FEA170ED30D6
+:10BD1000F2C3CC68D70EE4972F2BD3C83FAA0ABE34
+:10BD20001B8D7195789E616E484478EEEEE922BED7
+:10BD30001C1DEB4C77103F8731C443A3C5998EFC83
+:10BD4000DDB83CCC84E772A39772BE867566374334
+:10BD5000FBFBCD2C1CCF197E27DA4F5B62F66E8081
+:10BD60007C173B3347C6225FE5125FDFD24B7B0275
+:10BD7000E777EAD76C20F2C3AC55ABE93C46F20555
+:10BD800033D7E7C7C138A736A7E4A1DC6C91D3BD90
+:10BD9000867F81ED5AF861A2427C00E98134E28716
+:10BDA000F10D38CFD1C303DD1766E17EB49479502D
+:10BDB000BF273037DA09CDAC89CE2B9B1D5617FA39
+:10BDC000BFA43C917203E8EAC17BB7920FB680BE74
+:10BDD000375B18DB5A65A7F4F92A2733F7606C7BC9
+:10BDE0005502E57754B928ADADCAA0EF2F55B92952
+:10BDF000BFAB6A20E5F7547928BFB7AA80D2D7AA8B
+:10BE0000BCF45DCA25C00BC9212957A43C9AE5B0F2
+:10BE1000D27D5F29978C7C331DD03B348FDA93DC45
+:10BE200093F20EE761CA0BCA2349DF54C5EB4B48B6
+:10BE30004139D63015E93F523DF7C22BB82F2F724A
+:10BE4000B8699FCEB8DC6B067E45BC245BD95EF436
+:10BE5000CB56DFE969BC2F2588FFDB8B14660EE12A
+:10BE6000AB3B2AC29839446FCCA88CD1E5A7557E4C
+:10BE7000FC4627E8FF9E0E5A7C06C071FC375FAF78
+:10BE8000FF237C7FE637677A20BD018ECD8FE3B834
+:10BE90008BC35BE088C5FC320B9D737513FE936EFC
+:10BEA000C27F82FF903EF27EF333BFF91BADF3C633
+:10BEB0004A9B0BEDE2CF915E80DF3F097ACDACB4B7
+:10BEC000111E0B977FF5C22BB8DE175B49DECD5CE8
+:10BED00026D6A3E15EF397898CFC126055B34AC065
+:10BEE000DF97BFB60622A0FF2F15BE8E15300EA617
+:10BEF00061FCE1CAB73E4339A0541EA1F3770DEFB0
+:10BF0000E1217C3ECB39DD3DE9CA37A91E6BE81241
+:10BF1000837E1379CF38A29FC7EA82F9236F23FD6E
+:10BF200066661C648978CE52A338D185385B7C9FC5
+:10BF3000BD92BFDB80713C13C1FE1B92A1123D2B51
+:10BF40007B9A29FD14F52DF9936B484F49BE9DBD91
+:10BF50000ADAE1FAA8C9B5CE0D91C733C5F7591968
+:10BF6000264AE5F731D82F9EFFADCC9D82764567F6
+:10BF70002CCFC2346F0AE2B7B363945909E1831B33
+:10BF800032CC020E46ED3EC54507E90319A9D63964
+:10BF90005974BF8FF4981C676646DE0A8C2F9DB9D2
+:10BFA0006A184A61566D7127C4433D6F4B3FDC7E72
+:10BFB00063761E475DDA8E1E917EB553F8E7B53481
+:10BFC0006FF2FB16EFF8FD8ED7A0E7E22F6C44DF8F
+:10BFD000E23E226E2BCB3F60023920F5FEECFCDF07
+:10BFE000FF398ACE2976F1F84E48B99F757111F75D
+:10BFF000CBBA617DB5715E7478C717516DFAB177B0
+:10C00000A957E4C72E577E8A423B42CE67E4BEEF73
+:10C010003B121CCA253A272ADFB7BC635B715E4618
+:10C020003F768BBF5BF8F5CA1717B4E9EF36FAEF26
+:10C03000966518CE0FCC8CEE8D49FF1D53B3A2F13F
+:10C040001CE07B719FA4BD7D8EF47F97AF854EE28F
+:10C0500060BD9A5DD178BE75A11DFBFA6806D7FF59
+:10C06000E785BFFCC27695F63D17B647D2BA5AB0FF
+:10C07000FD9137F1DC71C12685C02863F5843FC08E
+:10C080002BB387EA358C638B6B0D77B3BF4734EAEC
+:10C090009592DF475620BFCDAF553C9B019E66BBB6
+:10C0A0002BBA43083C5B91DF807F4A6CB50308DF05
+:10C0B00002FEA7514EF60FD69B5FF708F997A1DE57
+:10C0C000376417BD1881B10288F7F711CEB3EBFAC8
+:10C0D000BAF1BC707EEDCE0564576C8F70A25FE143
+:10C0E0008C885B96FDEC12FCBD2B83DB3167C5F9B8
+:10C0F000D1D91DFC5E3FC289EBEC8CC2FDD0B2DD14
+:10C100006B02CED732F8BEE48E0CBECE65FDF9B51B
+:10C110008D51DDA1FEC9BD1F537A58D49FEFA8CF22
+:10C12000417D7C7257049D7F9DDCF5D4A8D761BC0E
+:10C13000F3B5C3E2715DC8FE3FCAB050FDF3EBD466
+:10C1400002C417F3F3B89932C46FDF5038E336F8FE
+:10C150005242D71F8F1F3ABBEBE5285356909E657E
+:10C16000F60A7BA209D7D19D5EE4EF68641E80D7F2
+:10C17000BA6B9C0F7558795D2E43BEA6F59748F5AE
+:10C18000579A42EAD92C6E8A33B5EC2DF48837548D
+:10C19000F83D2711C73F52CDA273C5E97D5C936F6F
+:10C1A0004739F9AE85E8B130D33519E5D3C57A956D
+:10C1B000219C0B535800ED9345F7466E403D26E118
+:10C1C0009EDE97CB83D2950AF3C0FC4AFD2AD3208A
+:10C1D000ED0CF4F7213F2534F4C738C9C6146E5767
+:10C1E000C8F8D1278B4C1E2BE8C19F3262E5FB0FAC
+:10C1F0004FCCC1F3B3F119B49F3B6E653E15FD4AB8
+:10C200002FF1F8D2D2541ED7FCA488872F8D0DA40D
+:10C21000C7417FE7047D4BC707D231EEA2F4A544A6
+:10C220008ABB3867E5E79EF81DCF594BF3A0BD8365
+:10C23000DECDD064FB98107E2A9DE976613D35D62F
+:10C24000EDCA7520BCCE6FC8CEDD1DC9D0CE35BDC0
+:10C2500012C9E3A69E0BDB680BA19B3393F39F7C73
+:10C260008F83DDC6E38C1EB3F0B8D4C73627FAFD42
+:10C2700021F87ACCA24D453CE03CD0BE9F6FAD4941
+:10C2800047FB57C23B3FAA86E03C27F87D7E780DEE
+:10C290008FE716F77BB13EE61B451C7AD3361BC5EC
+:10C2A000019D49ACDF83E39FD996892FF200FCFE04
+:10C2B000B97BA91CEC4BA067F1F3B600CEE7F436CE
+:10C2C000EE8F3E6DE1F6DAE971092EA46FC1F8B583
+:10C2D000D3C95FB3C9A6A09FEFB4C2AC0958BEB919
+:10C2E00003C59F17575552FC7631880DBC3F046932
+:10C2F00001DE033ABD3993E2CD4EE33B0C0A7D5F8C
+:10C3000089DF355633FD97888FAD7C7F75E6F9BFA1
+:10C310006786C67BCBB478933EBE4EF2892CCFCDD8
+:10C32000E4F22D57E0B97F267F2FA42CA2F6B1545A
+:10C330009A27C73BD089BF5BC31A229FEA87F114B3
+:10C340003D1494234FB240FA53E877D8CAF75F6799
+:10C35000B65B286EBDF895480FC5B1DD778D89E2D3
+:10C3600029546EA7179B007D902ABFD94AF165F129
+:10C37000CF87E5D9C83E67B4CF6DDAAC8A71C026E5
+:10C38000C6796FE171C7A3D196A4F26C2A3F2DF252
+:10C39000A7F76493DD07FD7BF07E55F12F7FC5F194
+:10C3A00038A1E828B7BBEC246F4B5BCE790647A3D6
+:10C3B0001E2CBB6F5034DE3F641FA80CED16239E6D
+:10C3C0002E9ADD9D50CE2ECB147277CF7A3A9F2ACB
+:10C3D00011F7084A9E57F83934AC43BC9F59B262F2
+:10C3E000D0E3C49FEF5B580F98CFB9DA47A242E978
+:10C3F000B12093CBD396FA5637D52F81FAD84FC9AF
+:10C400008A77A3089E2D168A5731D2F18ADB3FAF77
+:10C410005E51FB16FEA8E57E9656F367F5BFF8025F
+:10C42000FAFF6E7B98DB475F6BE91EDC594BED5CD6
+:10C430009CFFD917C2486E9D8DE1F2E124C8535F7D
+:10C440004F84E3E68729BEEBA309747F6F9E5FDF0D
+:10C45000AF1C77512697E36571EE688C172CFB8033
+:10C46000CB41A0CB2DD4FE030BB537CE63BC68D730
+:10C47000B23E5F88207E38DB99D3E5EC8E9EA49F88
+:10C480001A63389F03BCC978DFEFEC0B3D73E91EDC
+:10C490001D1A3DC00FC562FF7B36A636D91952DE84
+:10C4A0006811FBB800D444BEC13620DF8B2BB9BD68
+:10C4B00055625F45F12518AF3B208FD2802DB675B0
+:10C4C000DC2DF02BED2FDFC9147E4C1CAFA388139D
+:10C4D000273BA8D68A725B13F662E97663DC2E2FBF
+:10C4E000DF26DB03B4F1324E18F9D0A7509C4AC9BD
+:10C4F000B23BE753FC7DC5EADB719D49F84BCCAC00
+:10C5000000F7698D8A4A703486B119E3D1AE0C1DEB
+:10C5100027C49EDB151C87E1FB5FA5F807ACD9BDDE
+:10C52000992EFA8EF91AE8AF7499B28AC64991FB2E
+:10C530005D3E2F8927408715E3041B8789F276E645
+:10C540002DE134CEBBC5EECAE4FEA5C614D7C38325
+:10C5500091CEEFA9749FF7E24F7DA363DBB0D38246
+:10C560007ADE1A8C9705F88F6532EA677D26B7D395
+:10C570004B301E17E04C5FA78F17CFD8A4CFF7DA48
+:10C58000AECF67EDD2E773EAF479F7617DFE8018EC
+:10C5900017F7E1787F18F7E198E23EDC65E3FB707E
+:10C5A000CCE33E1C53DC87E377DC87631EF7E1981E
+:10C5B000C77D38E625BE713F8E79DC8F6379782F91
+:10C5C0008EA752116F8974407E67AF86E9EE235DB6
+:10C5D000D8C7EF97001FF07533D54AEBE649AC4159
+:10C5E000FB11EE77EA3CC1EEC2F8E15571DA7799BA
+:10C5F000FDF11E4AFD8A44A49BB981E258CB5FE35A
+:10C6000071ACA579610EF47F342C3FB902C343B5F8
+:10C6100038ED47AC7FC1D2B405F15B567988EEDFC7
+:10C62000372C717D703DA71FF96158512CD9518568
+:10C63000A8E762DBA7A3319E9CADD2C78F1BE3C9DD
+:10C640008D71E4463E90F6DF3396A64494EB5F6D21
+:10C65000B3AF42F8BF0A13F761A6D80DF1000E92EE
+:10C66000270B1F5436A2BEEEDC8BDB51CD47C05EDC
+:10C670006F43CFCA74D6A5BE6497B7E45729268AFC
+:10C680004FD73CA4871609989295A6C6FB50CECDED
+:10C690003791DEBC08F61AD9839FA8643FE03B5966
+:10C6A000A1F3C177B242F90BDFC9D2DF97E8ACAB97
+:10C6B0008FEF64E9EF4BF4D2C7E74F5C7200F7FDF0
+:10C6C0001356F5D5D59BED1D64C0A3805BD8B3B3DD
+:10C6D000417F78D0BE5CBC3619E9BB687E73E37DD0
+:10C6E00040DF45BBC3DC585E84FF0772B108FAC463
+:10C6F0007B9745BBC4FDE54ABD1E9E25F45091992C
+:10C70000F99CB1413E2C72324F0CB49FDFAB3E0717
+:10C71000DFC39AFFF6C7039CA9B8CF18D609E55125
+:10C72000B2C54371B5A53B7BC42C817E7BF7D06E2F
+:10C73000EC05EBFA44CDA187A6A13EDCC9F77F5FEB
+:10C74000AD7A398AE2CB04BF255B9CE148F70D3511
+:10C750003CBE0EFD676A6C902F36D4C48577770493
+:10C76000E71BE4839F884E401FEEE7293A48E72203
+:10C77000CDB562BEC3141FDAD9727EF21D2DB68C00
+:10C78000F77397C89F10FB0D39CF739907725C78C8
+:10C79000AFA36A6FB28AF2DCB47D0BEE43FE69D3BD
+:10C7A00066F7EA8FF1A03DFE88EFAA15FF81CFE77B
+:10C7B0002F6B46445D8BF6E70B16F768C8DF57F31F
+:10C7C000AC15F715C566BF95E233B76DB062BCF224
+:10C7D0000D5B37D0F7B95B0B291E731EABA0FDE8CC
+:10C7E00029F9EE81C047D170659D13E07E47C88F5F
+:10C7F000A2707EBE07F6D11BF8EEC8C5AD4A2EC6A4
+:10C80000F94CF4EEB416C2F75F8B7AC675D27C741D
+:10C81000C2C80E840F7E0FE40F0C76F769ADD7C542
+:10C82000844B29B42E265EEA4DFBB449814CBE1FD1
+:10C83000CE32EC878FAADC9F57C7D7419135103F86
+:10C8400001D7C97E0BD9B96566FE6E5319FC7D1DF3
+:10C85000A4DEC1AA8E5FCBF32374FC3C85C5EAEE4F
+:10C86000D3DC8A412521F989A3D374F5274FEC6DD8
+:10C87000E0FFBC6039C991EB74F7FECA16FB5CF4AB
+:10C88000BE211BAEFFCE787C21BD086A0FFD3E3E67
+:10C89000580FF97B93C2F73DBB6236A21FB0C8C4E4
+:10C8A000F74F5334FE7DC15EFE9D4D61BA75D82DA4
+:10C8B000CDFD47AE172D746E20FDED53F0EF36F031
+:10C8C0000F9AA2E51E3BDEE347FF84EE7EB7382FCA
+:10C8D00044B8910E65C29F5496C1FD4965BE7A2B3E
+:10C8E000BE9300F837C7C5523D7B1CC655D628E419
+:10C8F0006FC47431C559EAE3B4B03F8C7F5C7044B7
+:10C900002DC475622C2FC2778790BEAFF1B8D405C5
+:10C91000E8178A6AFDDED902F413A17FCBF0BE9935
+:10C92000A3B74BF811FD2B3A231E472BB9746F7335
+:10C93000FB012BC6E74D9C18938BEBC7C86752BE13
+:10C94000C3BAA6B8C2E6A38788CF9A8BCCC4C797D0
+:10C95000C3C7020FF7B31AF96F2EABB7E2FD94B954
+:10C96000BB1437EE4BB11EE2A533F2A5012F71B116
+:10C97000ADF121F1D4823743F93CC6F1356FAFE216
+:10C9800047F9D80A4F027F46F8DBC39F9CD75C4D1E
+:10C990001B857242CE6F1ECE03C78179E038F2DC70
+:10C9A000820D34AED734F25F2DF0F2385B237F8CEA
+:10C9B000BFC4FD32B75E32533A71B47E7D623B5CD8
+:10C9C00027932E75A4F2ABE59F050027EA85ABE51A
+:10C9D0001B391F298F83EB84DF4BB8DCBB4546FF37
+:10C9E00064426FE19FECCFFAEBE29B85BC35B63732
+:10C9F000C6374BFBC0A8770A234D146FD9EC4825E6
+:10CA0000BB43CA5F4DE8156DF9F7544F837A1C1A82
+:10CA10008F4E0F69C24FB8303295DE91485E12D703
+:10CA200011E95518E6A4B8FEC2252AC55117423DA2
+:10CA30005788DDB262595A32EA912FEFEFF9B40FFD
+:10CA4000ECF92FEF8DEF3810C6F96AB925DEEE0A42
+:10CA5000D6FB72F9C8648CEFF86AB56D8ABF0D7C9D
+:10CA60000DEFCDFD0A65BFF98CF4DC79D3D1A8298F
+:10CA7000D0BE74F9EE28BC3E50B29CEBF7F7BA6B0F
+:10CA8000C37AD3B9EF862DF49EB173430EFA89BDF4
+:10CA90001CA72D7645F1F2919DD0EE28FDE7A1A7C8
+:10CAA0009D782F7C89A523DAA5A73F013DA9909EFB
+:10CAB000237BE254187441E77091F49ED92985795B
+:10CAC000F03CEA9CE9C05FEFC3FD626E6D7A40C145
+:10CAD000C353CDDB1BF7F7CB9F257BA6F88125E958
+:10CAE000F8AEA0B6A447745BFE14996E11FA1CED63
+:10CAF0007A4CD1AEC7F81AB4EB318F763DA668D721
+:10CB0000E3F7F2B57ABB706A4F2EB7A4DFB95B7555
+:10CB1000532E9EFBF986B38C0AD2C30E7A07789106
+:10CB200012EE46F9B4086D28CCFF3982FC0EEC9366
+:10CB30001B757496EF04CB7780873481AD16B24EA7
+:10CB4000AEBF6467A1F77487B1185D7E843D51570D
+:10CB50007FA43345577E4342A6AEFC4657AE2E7F98
+:10CB600073C6B5BAFA63DCC374F95B06DEA8AB3FE3
+:10CB7000CE334E979F503055577F92B750573E79DE
+:10CB8000CA7C5DF954ED4E5DFEF6A27B75F5EFA80B
+:10CB900058A22B97EF22D7E17ECC86EFBFD82995FC
+:10CBA000EF23DFA3327A5F6DF00813F733DAB83E74
+:10CBB0005AF45E0F47281F3C29F8F95296E751E4D2
+:10CBC00057F9BEA57CB7722BEAA3FE788E1950F8F0
+:10CBD0007EB83E11F9D858CF583E38E2E04517D01C
+:10CBE0003266FBA94966901783AF39D8370DF253E7
+:10CBF000B7E7DC4AF941075F4E857C61D6DDB79A1D
+:10CC0000415E0DEE73F022969FDDDE97974F6064D4
+:10CC10009A94657D3209E365075F9FBACACDFD2806
+:10CC20006DDE779729E203EF89233E300D001F6305
+:10CC30007A10F818D3C3C0C7B32D8CBD097C8CE91A
+:10CC400011D89FE2F777607F8AE951D89F62FA3E58
+:10CC5000EC4B31AD877D29A61F554DA1F4932A8D4C
+:10CC6000DA7D5A5544E9675515F4FDF3AA4A4AFF9F
+:10CC700054E5A3EF877B4BFF4340F77E687BEF844F
+:10CC8000CA734E79AE595DC11A22506E349863BE94
+:10CC9000B607CF2BDBF71398D9D721F65AB6E2F9AE
+:10CCA000A0378DDFC54971E2E2FB1D29DA2748E78D
+:10CCB0003FA44CE8D157453D56F10686DAFCC1D475
+:10CCC000F67B905B7B733BF9DD2CCF31EC6F889D5D
+:10CCD000DF4F1E62E7F78F8798EBAB91BFAA7F64A7
+:10CCE0002E8CFF3910C9DFFDA8BEDFEC473FA872CC
+:10CCF00089AFF3A1F18CF2D53F36D07DE5214E7797
+:10CD000002EA2B996F39F7C77F21713EF21C5EC68C
+:10CD1000F7E45FAA1F81F6C25087D5857224346E6E
+:10CD200000CFDB0F447E2DE161389E3CDFDFF42332
+:10CD30000B987282E7F843ECF529E837187A97DD0B
+:10CD40001D1AB724CFEB954B0D2AFA55657C921C22
+:10CD500047C21B6986FEF282F147439CB5B978DE73
+:10CD6000515DE6A0FE3AC1776B1ED5F3A8D4AE366E
+:10CD700017FD72434B1D14072BE3043A8979433D99
+:10CD80009A67FE258DE224868A3809ECC7CECB7DD2
+:10CD9000D8CFD0F84022C6810DADE0EF90AD57F866
+:10CDA000FBF3326E01EB4784AC5B8413FBEDFE3783
+:10CDB0008017ED288F87F03B41EEEB5C222FCF1DD3
+:10CDC000EDC3C9BF3542C89A8F53B4CE59786FC5E9
+:10CDD000E6FC7304ADEFB4AEE8371D27ECFA7FC173
+:10CDE0002FDDB0DD7F9F5F3C9CDEF8807F4A6BBE0D
+:10CDF000917491746E8F8F24DD43E2CC88CE2D71B7
+:10CE000063A21F237FB5C757929F86D839DD91AEA5
+:10CE100018A726F948B9C4DF751B5A6A277D27F978
+:10CE2000C8C807ADF988F365F5DD76EAAF351F05AB
+:10CE3000E98FF8F8F7F9A841C5F3ABABE59F194DB9
+:10CE40006C5434143D94AA6D45395278C9F526E6E0
+:10CE500067B161A390A564F9E358DEBF75B9F65DCB
+:10CE600093253A84CF86083EDBDF4E7FB29E7CF767
+:10CE700042F67FBC9DFAEF0ABBE1DD3019A7E271F3
+:10CE8000E40E08C68D2E1AC9F9AB204525BB6344B4
+:10CE9000167FCF9C39B89DED82FF501EDFC4B4C30E
+:10CEA000D129F8EEA897DE1B1D156F786F54D8E7CF
+:10CEB000058673FE9BB26E20FBFCA6CBBC5BBD2C33
+:10CEC0004BDCDF49612957F9AEE86FB3687F78A57D
+:10CED000EF8AF2F768F3C57A4F12FC94E652D9E074
+:10CEE000587C9F5D33A372398CEFD1E6E0BBAD3E39
+:10CEF000CADFC8FC94DECC0264478C014584F95B30
+:10CF000018A37BFB8722C64EC33B8723FA8EE88E8D
+:10CF1000DF43DED9F3237C0B54EDFF3843DED93BEE
+:10CF200098EFA2FBAB07ED696487E27AB584F84B12
+:10CF3000DF06FDDC1DE67708F437A66F80FEEE0EF7
+:10CF40007AF42DD0DF98BF296309C376A35CFAB8C1
+:10CF500027D9FE66E708D8A8B58FBF9B735EED8220
+:10CF6000F87D37A6673EF2C5BB31D7E4E37CDF8DA1
+:10CF7000E964E2A9CD4A69F62BDDDBB293E57A08D4
+:10CF80008E378AC633E257E2D3884789DF7F039F13
+:10CF9000EFB485CFADB88FC0FB21F68FA31252F14D
+:10CFA0007C93CBD9B28864F1BEE87B396A2AC6FB90
+:10CFB0000E223887565ECBCC78DE6EE7783A59C5BC
+:10CFC0007C88DFD3380574781BFC7BCC3CDC141ADE
+:10CFD00007FD8A4DFB13C271729D4AF7F5CFBF144E
+:10CFE000467EBB537EEE975C68D21AB3D06FAFBA61
+:10CFF00056B9D1DE7C57253F30FBE950F2F8C8AB7B
+:10D00000E0D74DFC9D8352FBA836E929F797CFA5C1
+:10D010007A68FD33C3EF4B74B1F1F720E4BB94970A
+:10D02000FBDD962E362EAF257DD759851D00FD0CD4
+:10D0300000399BF47038EDB7F674F4FC88F3837D07
+:10D040000CBD3FD5DC2592F4D34111173734D09B6A
+:10D05000DE5B2B10BF23F096789FFDA08897FB7BAB
+:10D06000BA66CE0678DF721DEC82FE87EB193F07A9
+:10D07000BAD1C1DFC3BFDAFDB9235BECCF7358CEA1
+:10D0800055FDEE410795EE530C65E9740E3F02E144
+:10D090004539F7F62C33EAC990DF3DA079FD6FFBE7
+:10D0A000DD03C69A549C579253614FA65CFDEF2056
+:10D0B000A8625F257F0FA18017B5FA1D84A7A20A79
+:10D0C000785CBE636E9BBF839024DEA9662EAE376C
+:10D0D000E4EF208C4CD0EB9111CE61879D94EAFD5A
+:10D0E0003C4997891F1B9D2DF4C7D5D2BF8C11FDDC
+:10D0F0005BE24CE379FCD350ADD7C3E89F1F116FBF
+:10D1000071FB5DADF9E03FED774EDAA393F1F74F98
+:10D110008C7432FE1E4A925A6AA67720059DA6C0DC
+:10D120007F48A7EBC5EF55E4E3EF55B0FF7774AB4D
+:10D1300036D0ED7BB6AA3FBE5B7AA190CBF5F6F474
+:10D14000FE0D299EFBB341FE3C2AFC47D23F22E361
+:10D15000728DBF9724FD00325ED7379CD3DB773CBE
+:10D1600082CEAFEE511B2251CF1C37F1DF471AD8C8
+:10D17000417B1CE5D38CAC0A05F191C0BC3BE702B6
+:10D18000FCD3FFCB968CF9E9DDF87B912C8BFFFE6D
+:10D190008F846F7A128FE77A265BE17E3F378FDFCD
+:10D1A000DA98CDF701916E27C599176631113FCBFB
+:10D1B00092A767237F1E0DEB89FCB786FB031BF04C
+:10D1C000BDCAF8E07B9568A7A35DDC55D8A5D5C797
+:10D1D000EC76CE874CA7FF33FD765D9C73EFAD4EAA
+:10D1E0005D3EBB364157BFCF5E97AE3C3790A12B1B
+:10D1F000EF7BC4ADCBF7AF1FA8AB7FCD671E5DFE45
+:10D20000DA86025DFD41A7BCBA7C126B7A02F17B23
+:10D210002C3B95DF9F50849FC4C5E931FD9E8E74E1
+:10D220005F49EE3F64DCBB26F8D9B8AFE966E57626
+:10D230007D7522E3FB56BBD89F32FDFE461371EB92
+:10D24000D2AE673E7DDCBA8C576FD907897D8EDC04
+:10D250004F84C4AB7B107E19AFDE4277F17EA8917C
+:10D260005FBF167437CEA39B95DFAFABBED74AF72F
+:10D2700084247C46B8D40CCEDF9BED6DBF07F55DF2
+:10D2800036B713F2BB7BCF21BF3E0DE28AF0D96ADD
+:10D290003C7703FE9E40F5AFADEEA5AECB8F37BD1C
+:10D2A0000F9FCF347C37378BDE5FA57B81725C7339
+:10D2B0000E1FF75C1FC1E786F1A647F3F838166D1D
+:10D2C000A57B2DED8FC7F19A6065CBE8DD2A71CF84
+:10D2D000E38E55B50FA20B759AB5C6C21F1EF05B43
+:10D2E000D08F367A38D889B9E85F7DF85107D86988
+:10D2F0004F579AC92F1691639FECEB1EBCB7D30D05
+:10D30000F669C827A391FED0EF923E3C3E3D0B6DDF
+:10D310009F0EE47F6FB96F61D3C97F46F2BF0DBE28
+:10D32000237E94F3F89FBA7F21F9D78827B92F6716
+:10D3300042AF75177049FCC97521F127EFBFB8EEF0
+:10D34000B478373AE81E4D01C6E549FAADE9C3FDA8
+:10D350009CD3053EB01ECAA3F6EA8D54B3A2F1BC1D
+:10D36000A099B9A29D97F19BFF0FDD4B21FCB777E8
+:10D370009FAE3D39D14A3EB473BFAE3DFEA47F5748
+:10D3800071CF2E444EF07829410F7F7713C525DCED
+:10D3900017A95FC70FE570FCE689F504FADB91ABCE
+:10D3A00097130CCF3FAA97AB424ECC6DF9FD10FC02
+:10D3B0003E67B985EC6EC6BC8F619CC65FD658E8E7
+:10D3C0009DC7A11E46F6CDCC758A7F8312FCDDAECB
+:10D3D000429FE19D16F527B20FBF5FA538F1F71FF9
+:10D3E00066ADD497CF73F0DF1D99637CAF469EC7BF
+:10D3F0005D665F5F9523F4BB9BB9C92E137114451D
+:10D40000A28ED12E6BF6F3F346DC97ABDC8F45F1A1
+:10D410007752EFBBF0BC2BE41D16C06B7806EAF127
+:10D4200065E636E3225BF0DA4EDCC7398788FB70AD
+:10D43000F03897E65D61FC7C589EC389FAE77C175B
+:10D44000A91CEB636FE77379FC8A3C7F339EEF3551
+:10D450003B4C743ED5BC2B92E21CF0DC2B1AF8E15D
+:10D460008C6967C7812941F8B40655776E644CB55D
+:10D4700025BB693FF95E776D5B0EC6E99BDD7637AC
+:10D48000E4EF771CA477BC460B3F9811DE96DFF1E2
+:10D490001BCCDFD569F6717BB7B980BF7702F291FB
+:10D4A000E17A92F11CE3185877901606AE2578AE13
+:10D4B000F6FC6BC2A55C7EFE7B6910B5D7565E4B51
+:10D4C000F96ECB1EBC13EF194DAA9E67C150808622
+:10D4D00027168F0C87A60D5DFD4BC3916EC3943646
+:10D4E000CF2FDEC9E17AA5C1706F41A6D7F5E17AE9
+:10D4F0007532C6E6F40F89E75AA2D07A58A83019D7
+:10D50000DF45F25CE62FD688FC489E5FB49CE71BA3
+:10D51000C4EF2A6C11FE169C37A6386FF40B6C17FB
+:10D52000FE189C37A6386FFC8EF20BF328BF308FA5
+:10D53000F20BF328BF3045F985DF67326F72AECA50
+:10D54000CFEDF243D6079EDBE587D847786E179A72
+:10D55000C773BBD0FA786E175A8EE776A1E5786E5E
+:10D56000179AC773BBD0FA786E179A67036F0CE6E9
+:10D5700051DE79C6E9F213C0FECF0F59DF786E177E
+:10D58000DA3F9EDBE9FAD3EED4B5BF9D55EADAE384
+:10D59000B95D68FD19958AEE5C6F86788776D6DA74
+:10D5A00038E29F7D295E5B1FA0EFFF89F8E7DD165B
+:10D5B000DC2FAA75F3F9BE2DDCCDE95C53C0E96E12
+:10D5C000E2F72C94A6A944E7C5569E1FC9E3BC8D7B
+:10D5D000FC83E762F9167E2E86299E8B618AE762BC
+:10D5E00098E2B9587E0F7E2E86299E8BE1773C17F4
+:10D5F000C314CFC530C573314CF15C0C533C17C319
+:10D6000014CFC5B01D9E8B618AE762F81DCFC5306F
+:10D61000C57331FC7E1CCFE72C41B8D09EEFAEDB4A
+:10D6200057021FEAF6954E5D1EEDF9D0FA68CF87D6
+:10D6300096A33D1F5A8EF67C681EEDF9D0FA68CF8E
+:10D6400087E647E5B8687DA15D1FDA0EEDFAD07C6C
+:10D65000768DEF0DF49D8D59F7CD614C1B2295A76A
+:10D66000151019057DFC93F1FCB2214C498E01C9BE
+:10D670006959B279723EE435114799C39A4CF4FB6B
+:10D680007BB879C4388700A3B8D5EC1F13A97CAA4E
+:10D69000BC7F87FF80EEB9BB18FD1E8D3C5F97ED08
+:10D6A000DDCCA9622AEB07F36DD7338E2FEB91FC0B
+:10D6B0000C81036F5A63BC4FEE62471EC6CD6E11DC
+:10D6C000BF8FBB65298FB736F2D562612F6D31ED03
+:10D6D0003C88F7699A0A15BA779D6E66472C798857
+:10D6E000A78A3CB42366F789117AA9E23AFC1D3176
+:10D6F00009B7F483829CA0FB89839BEA4744433F9C
+:10D700009A6F18FD3ECE682BB71FB01DEE2B7BFB2A
+:10D7100014CFC610FE5E20EC71CDC7C77FEE99B165
+:10D72000BC5D386FF7DC335184C7B1CB148A3B1B27
+:10D73000BC9D79F01EF43D429EF6DE1E5071BCC2C7
+:10D74000657C3CD96FE1BA64BA175AC81AF2F15E27
+:10D750000BEBA73094DB126F30BFC338BF74582A6D
+:10D76000E8C7BED2FB5443FAC58CC4784456C7E818
+:10D770005DD131FD3ED4CD97C83E80FA25BDD6D3CC
+:10D78000A7D03BCE637D4B96225B8CF1DDF946073B
+:10D79000ACBF89B9535CA48AE8FEB184A79767A798
+:10D7A00009D422CB62F5A63005E9CD0EC585F00F70
+:10D7B000ACFC8948EF5CB785DE551E67765AE89D5C
+:10D7C0008E76E2752E3A64BC8EC15E30C4E5542F6D
+:10D7D000FE2C19FDCD0B234DE43759B83B82EC06E6
+:10D7E0006DAD42724DDA418522DEEFE2B2373A4C3E
+:10D7F00046BCEFB4507F325EA72CCD9F6CC2FB09B4
+:10D800009D37E4C4AA64073C8FF2F0ACEFE55B07F8
+:10D8100062BDE5FC5DD18BCB76F3DF1915E73BF2FA
+:10D82000774B678BF8AFC26C6F34C6C3C8DF4793C2
+:10D83000F764E4EF924A3F4FE17B7DDF44FA16AE96
+:10D8400017EF7EAF2CA4FBEFC6B8AB1261FFCD5F24
+:10D8500066A1B8ADF906FBB044C4655DEEF74A0FAA
+:10D86000F531D887F27772441DA676F914FDC2F21D
+:10D87000DEE7340B9703D376323AAF9AB664840965
+:10D88000DFAB66BB39FF4C5BC2ED9C69AF7AE8FE4B
+:10D89000A6B41B3F10F6CCF84B4984FF8F85FD32B0
+:10D8A00009E35501CFA31BC2441C5B22A5932FF1B2
+:10D8B000F8D5F10E2E0F1AF6F177379A7D366E579E
+:10D8C0001D66FCDD38037F8E33FB4D78A1D13D18FA
+:10D8D000F813F263D01E82FEA6A07D1487FC9E3250
+:10D8E00092E2210B14BA4764E4F7D1968A3730DE0E
+:10D8F00076F466E6F6B1507E073EC6FE7C0ABDC7EA
+:10D90000A0897DAEE46323DF4F8F10FE2907F73F28
+:10D91000B5F829D056C547D47D7F9B8CF1C4D3D1AF
+:10D9200067D899A6E1C1B8BDC82C5EFE8F17FF3637
+:10D9300079196E7ADAF15BA8BFB4123E34F9EE447D
+:10D940003B7E04F41FA0BCBCE3AE5CEBCC1079F9C9
+:10D950007F018165E5A90080000000001F8B0800A1
+:10D9600000000000000BED7D0B7854D5B5F03E7340
+:10D9700066269364122621901048980422A906383E
+:10D980007941401E87C82358B40349143009C33B6A
+:10D99000A878236A0DBDB499908001C11B340AA2F6
+:10D9A000E880CAA5966AB4DE0A4ABD838855EB03AF
+:10D9B0008354EF6F1B86A7A0B546B8D6F67E5EFDF2
+:10D9C000D75A7BEFCC9C9399006AFFFF7EF76BF8E8
+:10D9D00074679FB39F6BAFF75AFBE4ADFCD28CFC2E
+:10D9E0007E0C7F2CAC3F630B5CF43B9BA2E6A50650
+:10D9F000F3185BB12E27953919FB067F26F62C17F5
+:10DA0000FEF54AE6EECB584D9FE01D8AC6D8208D24
+:10DA1000E993D3189B83838CA5A1022C97B1B9A25B
+:10DA20003E5D1BF2410B8C5713CFEB69ED8ED93E57
+:10DA3000A82F7704A7AAF0E89FF2EACA065818EBC5
+:10DA4000A3BA198375C5D8BCFAC02CC66C7BF20387
+:10DA500003E1919AEBA2E7CC1A1CE04960AC7A434F
+:10DA6000FBC6616E1C17FE57CC5895BDD5C67020FD
+:10DA7000E6B77986C3FAF298EE77627BF8AF88B1A1
+:10DA8000E3EB9E7F6ABD125AFF711B9BDD1E617F17
+:10DA900093340BCDB3B38131F730C6763538A87CDB
+:10DAA000B2C1C5DC318CED6E48A3FA530D6E2ADB92
+:10DAB0001B72E9F9B30D1AD59F6B28A1FAAF1B743D
+:10DAC000AAEF6928A3F285060F3DDF3FD05BA0C116
+:10DAD0007A1FB0E8C7EE82FDA5ABAD8C0D8135B6DF
+:10DAE0006E66780E8B700B6E829FEE18C598971F2E
+:10DAF0000B1B6CD7ED2C85B1A6758A6B35F4F33A08
+:10DB0000EDC79444285B9440CC0868E09BA207735F
+:10DB100079DB6FB2115E1C8E2CB7EBC127A05F4D75
+:10DB2000839DAD87478F5EC6741CE7D19FD8FDBE2D
+:10DB30002C84DBA1838EAC101C3FACBFD7061881B0
+:10DB4000C797E3867673EB62B5F5F0FEAD7C4F19AF
+:10DB5000AE3B3E4FB37B016E19F98CC6BFAE9FE75B
+:10DB6000871A94CB37EC7FE47D3CC77D59762FE054
+:10DB7000CFFC3DF96BD3DCD8CFEBC17EF39D2EBB40
+:10DB800007FADDD29C6477231EA4B2BAF63C9CA7A8
+:10DB90002B73564208FEB59A42EBC82AE0E37F8613
+:10DBA000E744ED5A6D330DED2CD40EE0A63BFA8719
+:10DBB000E09461653E4B01C2CBCB7484D700A621B3
+:10DBC000BC06C2F39802FE3E3639043F33DCEC005B
+:10DBD000770BBC1F08A5BD2004C70C78AFC2735BD0
+:10DBE000EEF1392C1BE1C6E67922E0CF83B87E84C2
+:10DBF000FB6C07D1D562073F4FA0ABA9A980872B4B
+:10DC000036292E4003B6C8E9BE7E0CD417BD666324
+:10DC1000ABA13E23D96D1F00F52E38DF1D505F707C
+:10DC20007BBEDD0DFBAEC2B380752CDA3286E86DAB
+:10DC3000911FCAC2E87479C3A603197B117F02BA87
+:10DC40001DE964914BB727E785D16DAB427461AE96
+:10DC5000AFD3545A77156393117ED5B767D9173868
+:10DC6000B1FE9A6D451EEE8BC341F68376016C378B
+:10DC7000239BBD8AF4D505FBDA91C5E72B081B7FF2
+:10DC8000018E1F363FB49FE781FA7D5A028D37DF40
+:10DC900005FBCEC2D245EB0438109CBA36C2786E72
+:10DCA0009A87CE6361C06FD3703D569817EA735D53
+:10DCB0007E1BCEB3A039DF8E7CCABB81CFE36D491A
+:10DCC000B20F87FA7CABCB9E81F08B0358A4D0FABD
+:10DCD000FC3BE06816015C929D380F9B37CBD91353
+:10DCE0003EF3C57A17B526D9171B9E6FB2E17900AE
+:10DCF0007FD323F18D83E2DC17344FB233EC6FD541
+:10DD0000ED1AAE47C0F7D4ADB1EB591FE8DFB6D975
+:10DD10009605F57F13F87B50C07546762047C17D88
+:10DD2000DF1AABE13AE7B85A697FDDF0BD1FE001C9
+:10DD3000CF17BB3C045FC00B1F03382C6A339E67B0
+:10DD4000683D1CBE8BDAE613BD2DB17AEDAEF075E1
+:10DD50006CD99FA3005CE6007D2B007FE6F2662273
+:10DD6000BE9CBEFFFA4CDA27AC13E19AA0B9A7A675
+:10DD700015119E101E4B7CA929E4F42BE7FBA3662A
+:10DD8000A5F9FE28F86774BAD45F4D43BA84F35DF1
+:10DD9000ED8E4E977664DC30AF7D91E26F527AD291
+:10DDA000A9A44F4997924E25FD3E62F304D29410E8
+:10DDB0009FA9E9C3EA9E8D00A78C7C7E0E73C5B92E
+:10DDC000025C5F41B8CAF7F67CCE8FAAB28DF48EA2
+:10DDD000E3E1B8E704BFAA2A0DE4DC9A176A2FE74B
+:10DDE000AD4AE6FD10EF11DFCE8973C7F62BA8BD53
+:10DDF000E063825F2CECE617BBD7F4477EF18CA280
+:10DE000021BF58B1F140C69D00B715BF8CD7100691
+:10DE10009FDCFCC42D03B251BEF9E9DCE4BA16FF65
+:10DE2000359FF8C412219F170522F38BEB73BD6A4F
+:10DE30007E71A8BEE8BE5F5EE6E5FC2680FCE60FCC
+:10DE4000BF7CF1C85877489ECAFD2C6879D736DF69
+:10DE5000190E3FBEDFF5B9E7E6E3792D74DADD2A66
+:10DE60003C5AD83C9FF82F4B635A8E123A7F335E50
+:10DE7000CC6F5674EA573FCAAF7E8F7C7AE18699A1
+:10DE80000CE5943C379898B15121F92AD77F593E37
+:10DE9000A7DB1FE4F3FE73057ECFAD9D641F908268
+:10DEA000FB9D5F886AC51CF17CCE22E3F3EE7373A1
+:10DEB00075F3F9B5482FE7DAF9B99DDB6023FE73F6
+:10DEC0006E77829FC1FE3E59F1FCDBD741BB8F1FAD
+:10DED000D89E89FA4AF8B9B1427E6E582E8573638E
+:10DEE0007D239EDBD8F0735BFA283FB7854FBDF5E5
+:10DEF000C717DCB45FCEEF36C6F8911F2F687F8658
+:10DF0000CE714ECB265B16B4BB3A3F8BCEAB9BFF9C
+:10DF1000D7E5BB18C0776ECB761BF289AB251C4CBE
+:10DF2000F400A5CEC2E80CE592921CD2C7647BE453
+:10DF30008FCFC03CB7DF1A9BC84686E6B92D9FF34A
+:10DF400085857549C938DFC2BAF9F7B01121796002
+:10DF5000DEE789584E2F0B603CA4DB1393B4CC153D
+:10DF6000849F968872F74681870F01B863011F0668
+:10DF7000C6B7FF1CE130F09FE234E41F438706FD83
+:10DF8000382FE237AEDB0EFCD301ED86DE1CFC1C25
+:10DF9000D73114300CFB6199904C25EB0FF51DB077
+:10DFA000EC1228B3555EB6E6733D09DE07F03D4B33
+:10DFB0000916E3FE257E9BF1D7CE1E6FC9463E961D
+:10DFC000C2B42677085FE538125F253E47DB5FCB9A
+:10DFD00045EEEF441687A73D0EF6977C09FB0364D8
+:10DFE0002D490EED4BAE0F7478DD82FAE33F0FDF63
+:10DFF0008EFAF389462DB3CED9DB7EDBA6F48FB043
+:10E000005FF33E25DD2C72709A06BAE98376C7B9B4
+:10E01000D6217D50EE9C5040BE41BF13B7C65A700A
+:10E02000FD725FA897B318AE9763897A391BC6F55E
+:10E0300072ACA35E8E25EAE5F43C3F99CB23164CE7
+:10E04000403D13F401CE0F029C4E3AEB87D0BEE464
+:10E0500073A91774BA8209C961FCFB649D909B2C5B
+:10E06000B811E99BD50F614FC0549DAD27122C7993
+:10E07000889F7C7DB2DFEDB62EE2872CC1EE7E025A
+:10E08000482EFEF677A7A4C27C8BDBB2F215E857C8
+:10E090005D5FD8590FEFAB9B5335E41B8B9DEEB5FD
+:10E0A000281717FBB234948BF16DF9A7B7C0FBC5E5
+:10E0B000CD5768D8FE76857990BEA49DB08475FF53
+:10E0C000909DB054F0B5A5C82F015E4BEA0F0C75BA
+:10E0D00041FF255A6C3ECAF7A55BB89D30C3C25AB2
+:10E0E0001494C34D9EA9C8C7BA1E5434D437D9C39B
+:10E0F000C05F1D21FEFA7EAEE7B7C867D857807FA4
+:10E1000030FEE5288355DC57BB8EFB60A08F3CC1F9
+:10E1100070DD1ED2EBA70ABED1D9762CC19DC7E116
+:10E120008DFA3AF3EA16E4BB2B845C1B6CEF3A766B
+:10E1300017EA3309166D07E797EFB8719FAFAB2C5D
+:10E1400086E48D682FF8E9E09F953890BFAD48C808
+:10E150004E25BD6A8B4AFC51E24FAD58F3E2EDE526
+:10E16000FD116F16C37B94775BF121B0D0B56D576D
+:10E17000F547BC5AB469CA033E906399028E27AD35
+:10E18000C199783E67B6A72637A25EB8BCE93206C9
+:10E19000EF176DBF2B13CB33DB636723BF9FEC9A65
+:10E1A000393909F6BBE4E1A47C354C6EFC45D0E37B
+:10E1B0008DCBAF4A457BE0E6AF0F3CE2023B6E31D0
+:10E1C000C01AE1FE457BBCDF074D6E6ED893A902F5
+:10E1D0008D7D1DE3FD1CE1799365DF756390FF2B59
+:10E1E000FE9D03A8BD3BD5D58B9D7D1AED50C0E7A4
+:10E1F000E53FFB80C6F9D4F2E6B573A0FFCDCB7F37
+:10E200009588E3DC74FFE1512E78FED650EF7FA3B2
+:10E210003DFFB1B27DA70B05D396ED23506E7F8DE8
+:10E22000765A31E2B5E7BA3908F7D755827BB4F9A7
+:10E230006AF728045F59AFF6F7217DD61B60761781
+:10E24000962E46FAF21995D5A33E20F51AF93CA967
+:10E2500080C3E54C9FD64CC48B653B3767A25C39C5
+:10E260009BC0EB553BAF7F03F994F7F118AEB75B5A
+:10E2700019E9C90B7D5CEF66B540AF0342F30F2C83
+:10E2800088A7F1966D2934C843D04BE8F9592B2B58
+:10E29000C3750C6EEACA47FDEB436B60319EEB879A
+:10E2A000A0D7A27DFB17C1C73E6C55A7E2731F1014
+:10E2B00012EA231FB6FE2A61A833A4C72514B507A6
+:10E2C00090CF2D7F2EA940E52845F8754BB75FC448
+:10E2D0003975600AE9632EC4D3157B0F4E65BC0EF9
+:10E2E00082303A3C6F147A5877FDB967C8AEBB7973
+:10E2F00037D7276E6E7FE6D57418E7963D429F109C
+:10E300007ACA7241CFB73CC7E1B2FCB963F685E186
+:10E31000F6486EF2DA81A0094E78F6F2D9F7BBD151
+:10E32000DE56C8AF52A965CE691C8AA5F4977491D0
+:10E330007EB83EB783ECF2E5CD62BCDC8EB5D9B4D5
+:10E34000DF997DC3F5A1890536EA27FB033CA8DFE9
+:10E3500097B1892390FF0596C7B5A05CD76F715A16
+:10E36000B16C5AEE2439FF709D25D70AF0D5953847
+:10E370000DF5B87A076F7F675CE20E2CF7C5F1FAEE
+:10E3800097B19924A7BEB4789E5902EDEE540FC5FB
+:10E39000A2FF6300EB3A60817A493FEF7505306F69
+:10E3A0002A03EA51517E04147CFFD96F3E2AC475BA
+:10E3B0004C181C3CCF6069B6C6BC3993014F6A0A41
+:10E3C000C43EF3828588EFFD5EE6FC7A9B8DB5A0A6
+:10E3D000BC63560F9B05CF03C8BFF0FCFF66F1235B
+:10E3E0003FDEA7041E0BD7BFEE1378EB8971B6286A
+:10E3F000B0CEC7B3BC4B711D3F526CC35175616E3B
+:10E400003507C7FFCCC6DF4B3DB65430E10C618FFA
+:10E41000D9D3D39CB8BF26012F45D7593DAC6375DE
+:10E42000DECB0B115FEEEE72B01898BFB42B8EF4FA
+:10E43000DA8CF432926F4D022E8A3B05650E7B39E1
+:10E44000CFE28B81F5DECD1C7E6CCF1C26FDD71272
+:10E45000AB633F65DF6FFF86FC7EA0FAF9813ED09B
+:10E460007EE09D8AD6046D6ACE9DDEF60E43FBD912
+:10E470009F8FF0BBB39FB7B100F6D779AEEC98177A
+:10E48000CEFB6E57BB43CBE3E385EF63DFCABF250B
+:10E49000265B42EBFBACEBF42F9F2FC2D24172A85C
+:10E4A000749FCAFD4DA6F57C96E6B6D23975390241
+:10E4B000166CEFB4F81505DB1FF800D757EA7006A5
+:10E4C00054D4E31DB63F85CB19762823E9F41524EF
+:10E4D0005AD837A02CF46FE2E737A18FD1BEDC59B0
+:10E4E000C0EDA49DE29C247C25DC985B67E172E68C
+:10E4F00025E7CE6AEEC7E274FC4FE2F9B9BF669336
+:10E500007E716E1FE81911F44E591E463D03F487C3
+:10E510002FB3F5A7106E52CE564AA92BE4B02AC6E7
+:10E52000AD14F0AA745A387C2A4CF0117863C60BEB
+:10E53000F3B9CBF3643F3974B04F169DE3F07F61BC
+:10E54000747E7B111F3BFFF6E61A203796AEEAC7B2
+:10E55000BC59FF13CF2F103B0CF58AFB2DA457A0FD
+:10E56000DE877AA2E41F5EE40323E939D703731937
+:10E57000F18D1A358EFC8C66BE21F985370ECA11D5
+:10E58000C8375A891FDCA9761DB428213E31B82C22
+:10E59000381CE5702798FEF83E6869A7E7DF146429
+:10E5A000137F18C40E0D203FAB35588C7AA0EA7843
+:10E5B0006CDB4910296DEB387D34D9FC0F2E41FE00
+:10E5C00050E9D450AFFBCC6FF1D9609D6D499C6F81
+:10E5D000B42D4B2779FE19137C64B69DF8C89516A7
+:10E5E0008B8FECAD39E9646F75B7CF71937FF5D739
+:10E5F0005FAB976DC1F7331D2477DB501E43BD6DB4
+:10E60000E3707AFFA2E44BCB385F6A9BA90F88C303
+:10E61000F733FB5B70BEDD29DEBFE1B9A7ABFE9F20
+:10E62000C7A23E79531C7B029EB765E90350DE3ECC
+:10E63000A078E62CC6FEC3F9BA8373E29EDAC98FCE
+:10E640002780FEA4CEFA841DE17E6FE9471FEC3BD4
+:10E65000F620C2CB57CA72519FEF44FC1C193A2FC7
+:10E66000B0CA597D72E8DC524CE726F1D56783F3D6
+:10E670004BE1E7B75A897E7E29E2FC947AC06FE2CB
+:10E68000FFFC7CEE54397F672F696E2CD5FEDED4FB
+:10E6900042585FD3AD702E2410837720BCB6AD4CAA
+:10E6A000D0711F9D1656DB1E816EB30B85DF09A549
+:10E6B00031D0C33C410FF324DEAE32E16D7050D255
+:10E6C000E97881B7D0FFC578CF509CF753E5F028A3
+:10E6D0007CF8E67FABB323CD33BC90FB0BF68356BF
+:10E6E0005A48F2B5D4A0AFBE99FF5106CA29F6D553
+:10E6F000814128775F49F18C2C04FE113BB48BFCDF
+:10E70000E69D03BA6CB8CFCE391F67A05E34AFFE6A
+:10E71000B7445F17BBCED5F135361C27A922CB16DF
+:10E720008432B522EB20E2CF91E931EE98087AC825
+:10E73000FEE9C33250FFEDA81C96817CAF030EF0BA
+:10E7400010AECFEA4E40FEC7F654131FAB147CAC9C
+:10E75000A362087F2EF866D8F38D45A8D73A2D5AC4
+:10E76000B8BE602ECF02DF0C00DFFC08EC332C4F6C
+:10E77000817D1600FDF504D867583F06F6199647C7
+:10E78000C13EC3B2A341A3F74D1543F604E19CBFBC
+:10E790006851687CF4DF46D28B6F7C5C6501091F91
+:10E7A000F8AFF6E17816C80DD597B4F535D4176DE6
+:10E7B0001868A82F681E62A84B3DD2BBEA0AC3B8EE
+:10E7C000E565858676ABE347D8F05C93CAF239DC21
+:10E7D000CBF209EE1DD74481FB35A309EE87A78F45
+:10E7E000CE40781E46B8A3FD66D512F01C24DC6727
+:10E7F00089390F9715F2E702EEA1E7E5BDCAA94FE7
+:10E8000010DE31087707951F21BC09EE1CDE2710AA
+:10E81000DE3108F75C2A8F22BC87E1B800EFA20B3B
+:10E82000C3FBE6DDAA010E373E6E8477EDC37D4D56
+:10E83000F01F6880E3A20D430C7509EF05CD467803
+:10E840007B57159ADA31B601E0508EBF001D1C2EA1
+:10E850009E467129AB83F9E281AF2421BDC1FAAD97
+:10E86000150AD78FE0A715E87016FE02F46575F259
+:10E87000F7CD73143FF225D489D0AE00B806E281FB
+:10E88000CECA5D979D42BE743D723015ED7A3F95BC
+:10E8900037B000D167350B527D1EEBCAB443798B7C
+:10E8A0001A588BFEBBB71CDE27919EFF32FDDD4E52
+:10E8B0000589529B3F0CE99C3993C9DE8C764EC08A
+:10E8C00029257F62CE51625FF05381FC1FFA75C427
+:10E8D0008FB8E30E3887CFE60747E1FC373BBC8FA4
+:10E8E000A65868BE3D38DFA736EFB0BEF0FCADE2FB
+:10E8F000D11948FFCCD3CF6027459B6F136E16E02C
+:10E9000030BF0CE0A4601C8EC3E5642587CBFE4DB0
+:10E910003176F4679C5C67237FE5E6F8CC4CC4DB7A
+:10E92000936BA66522DE356E1A9689F83EAB65DAE2
+:10E9300059E4DF53D41935144F6DE578CFD8ADA421
+:10E9400077DD21CEEEB89B6901785F393D41F3C197
+:10E950007EBCBEAC445A2FD39DF9D06EA1D8F7C26D
+:10E96000D6A533703CB9FF051B620CE7FFA3126309
+:10E97000BD92D943789685E76C0FBDC7F357ABFAC4
+:10E98000787BB1A3EBFFB0FD8D57C2C63B5E98907C
+:10E99000827A0B1BCD467FA386FA4783EB970DFE49
+:10E9A000375EC909C155E2D36F0A3D9FE0F9C063E4
+:10E9B0008AB7012D913CB8A5DBAFB52F11E1B7297E
+:10E9C000FEA57BAE44B8BCC7FD1C9BE36B887F7C77
+:10E9D000827C3B0BF9F4F519C130BE20FB07053FE3
+:10E9E0003DF2CBEB898F1CA84CA5784CC773DCBFDC
+:10E9F0007C54D07D47C5F5D57700FFECD8AD929E0D
+:10EA0000D7B1E7FC41F4D374B42B9A00B9257CDC70
+:10EA10008E3DC0CF91DF7A6CF47EFFEE5FD13ABFBE
+:10EA20002F7E5EB157F0F32D7CFEC5560FF117E631
+:10EA30009D6DD8DFDF8BAF5F889F1FB1713CED38D4
+:10EA4000A292BF8DF9F443B9FDC3F0B38CE36763C1
+:10EA5000650CE3F295F39959154007A8E733773130
+:10EA6000DA949FEC29EF47F27283ED38EAD32EF85F
+:10EA70008772DB0CC74A663D1E0CC3DF9B9F83F683
+:10EA800061EB9B85EFC3F0D98CAF2545467CFD82B9
+:10EA90007D9569CFE6EF0FF50FF13DFC09E72F9269
+:10EAA0006F49FC05BE55837C0DF8CA554580B73FBC
+:10EAB0002EC8FA4D5009E32B17C9C736C57F4D72D2
+:10EAC0007073FCD784C7872B051E839E81CF3BAE16
+:10EAD000E1FA06F3CF267A9827F5089B2701FDA4D3
+:10EAE0004756F54DC4F7C79ACB89EE243D99E73BCD
+:10EAF0002AF04FB69B67EDB26911E4A17795117FBB
+:10EB0000D8AED984EF7798F02CDAF8E6F6729E79D1
+:10EB1000A678AF799EDB8A84DED95E7D51F3211918
+:10EB200076F727FD362E84972AF2812F1382A47F51
+:10EB3000CD36E86547CB46935E76B8E27C44FDEC83
+:10EB400068C5F9B74623BD95D904BDD752FF72F108
+:10EB5000DEBC8E8F84DE704AF08F1382AEE57B754B
+:10EB6000FB9AFE7311EF57A91AF2AB23330A09CFB0
+:10EB7000CFF82B69FEA3152AF99BEE2F9A3217FDC9
+:10EB80004D723D72BEF26BCE27A03FED0B8017FA9F
+:10EB9000C7CA6D5ABF48FA85191ED1C695F803FA3F
+:10EBA000EC11DCE761E4A3F8D66B84D361EC0FEFE2
+:10EBB000676D5729DE6686D381E9C3882F1DDD2561
+:10EBC000F827C015F5F0DA878DE7BAA42DDEC46FFB
+:10EBD000FA1ADECFAAE47A99E4D7727D87570DE955
+:10EBE000179E3775A1F396E35C2CBEDC28FAA3D8F8
+:10EBF000FC86E46FB2613CB0144DF3659BDE5F6E42
+:10EC00007A5F60AC5F241E1F13F823E5CFB158ADC7
+:10EC10003A521CEFE8D531B5E1F9099D45DC7FD3C7
+:10EC20005924E2DE9728B7FFA328B2DC8ED65FF224
+:10EC3000BDA70B3D41E4772C504EF1EC8BE57361A1
+:10EC400072FE4C11D27950B1637FA957DD58C6E5E9
+:10EC5000C2E6F8A7284FE3D346AE17ED6F8C213CF0
+:10EC6000FCF335FCFD9FFFED23D2A70EECDD9C18D5
+:10EC70002EE7255E9EDD332D11FDC2272B1E4B0C8A
+:10EC8000B703E4FB8F2B1EBB672CD1B7AAF5762EFA
+:10EC9000DFD61EE8A810F680D0176EB2B6FF3FB1DF
+:10ECA00007CC76C014F5E144E47F667BE0AC5B4FB3
+:10ECB00074117C04DD09B972A380CF9F6D7A22C5DF
+:10ECC000E9761572B962C24F0987D3120E1BCA7B4F
+:10ECD000C59B53422EC8FA622B2378781D8CF465AD
+:10ECE000D6A66818FFC234951238974315F98FA13C
+:10ECF000FF4AB67FA65825FC96F31CD9A6B4A37F7D
+:10ED0000E5B7CDE5D57760BEC38C78E2ABB2FD1236
+:10ED10005FEFF2EBC8C6A46B711EEF1655C3475EDA
+:10ED2000DFB17EE1EB977A9AB9DF326BEB45D9D14F
+:10ED30005EDFF644B46F83629DC1FDB1767742CF4A
+:10ED40007E18AFC1FD2F9BA16A8DB0FE651BF8BA7E
+:10ED50002A7DAA960DF5DFB63E762DD2C1897A9B23
+:10ED600085DB072E039EBFD95AF836B63F59C6E554
+:10ED7000CAB18AAB12310FCEB7C5A6E5B87BCE5764
+:10ED800053CCF3D2CEEE89B1A0FFF46CBD8D05C893
+:10ED90007FE1217BF9C88621549E45F871FB9ACE0C
+:10EDA000FFC662EEE73AD1BAB03FA72737AD43E2DC
+:10EDB000CBB15D6A993F02BFBA519CDBA9AF9E26D9
+:10EDC0007C7B755739C9E313157C9E53ABB44484DF
+:10EDD000E7EF36A844C7277D7CFCFD7BEF4A1C0B80
+:10EDE000FB385BC1F77576CF9D6F8F817D062BA4B5
+:10EDF0003CE6724AE6F704370CA178EFA7CDDCFEBB
+:10EE000096F42EE3E157AD3C9248FDA59CDB3DDB3B
+:10EE1000B0FE8E5D27C80E3BBB0166E372CE998FB4
+:10EE2000F986BC3B5B32C378BEB32AE20DF5792D7F
+:10EE30004679D6B897F32BB39EBB7803E8C1E89721
+:10EE400032D9790B1B0B134B907E510FC63C932785
+:10EE5000CA0FA6E23EDAABA95D85889B2D6C8B318B
+:10EE6000F083CA66A35DB7C064C7F5B0EB4CF24847
+:10EE7000C2697914F924F5B90E61AF1CB579AA23DA
+:10EE8000E553B41773F9330FE8370DE3444CAFBCC7
+:10EE900052C07B3DC2C7DEF5450EE8D31DAA361E23
+:10EEA000F5EA1E7460D203CBCB8CF0659A8F95483F
+:10EEB0007F849BF4FBD3A8FFB7F41572DB0772289D
+:10EEC00001E592FE6C31CA958BF51F5CB47E5E2322
+:10EED000F4F31A837EDE814DC2FAEFAFBC9EFC5480
+:10EEE00047AEB99EF4F523DD7E2A8FC14F25F5BAD2
+:10EEF0002333CA0DFA67D8F33EBDE58B47D3378F6E
+:10EF0000213F263ECDE5D25A6147360B3BF2C80C75
+:10EF10006147A630A223AB556791F8D9A5EA6F0BDC
+:10EF20009A8D72C9BBCA683F3E3FC97B16CF252662
+:10EF3000ED72C3739BABC0E83F34E1E740C6FDE729
+:10EF400077A12F00E0DE54C9F34EF139E6BF48B98E
+:10EF5000C4A03DF28BCA0D97FBD7F3F73EB500D3A3
+:10EF6000E518AA74D4DECAEBBAC2EB3EA778AF8A22
+:10EF7000BC371BD48F6569B351EFC2BC9EF864FEE9
+:10EF80001E516420E075627248FEA15F3F9687D6ED
+:10EF90007D89D06F5045D62B48D798EF735901DA49
+:10EFA0008C3C2F2C0D5DFA05347E00F37A824D13D4
+:10EFB000C9DF5CEE48E4F179B0A37BC7BF46AED7AA
+:10EFC00095F5A5C90659F97AA2E2B36877217C0EB6
+:10EFD000D3C3068C223F9A85FC2D9BE247D8107F35
+:10EFE00067393D190807C07792AF1DBFB1131FDE07
+:10EFF0005FC9FDB01DD3476FBB1D9E8F78DA49BE38
+:10F00000F48EC5D20FDE95108EB747579DB0205FA6
+:10F01000FEFD1EA6611EE3D1DD5507DF80710EAC3B
+:10F020005AB8B118E9E84D95EC06B3FF76D2D3E3B0
+:10F03000C8FEBAEE1A95F2BB0F97A90CE5DAE10DFE
+:10F0400071063B24E4D755093FBED867A5F768EAA7
+:10F05000E462FE15FA37314FAB8C9FCB0B829FB524
+:10F060008B73FCB9D063760ABA69137473AFA09B33
+:10F070007566FFEEC39C6E0EEF01C301E4FA3B33ED
+:10F08000169692DF7A0BA33874D674757D11ECEF67
+:10F090008A18CD86F09B34239FC3B342B160FCA68F
+:10F0A000BC2CDF86F47E455FB70DF96879D94CAA90
+:10F0B0004FAEC8223B7FFF2A908F68EF2768194820
+:10F0C000974367C4042C89683716129FB8F28CC521
+:10F0D000402FF9813803DD5DFE78B2E1FDB02DE906
+:10F0E000867A3F4FB6A17DDF32233DC60D2D30F22B
+:10F0F0005DC6F54209E729EA38F2731D0DC9517A58
+:10F100002FF511E9AF93ED015A06BED622E4C808E7
+:10F11000A8633EDDBA8A2607E64D7CD16ED5F8F8A5
+:10F1200055A41F38B29E73209D606815F3AB5AA496
+:10F13000FE29FCF74C67A6756D6018673D5AC60836
+:10F140009F62873205F5AF3671DEF7897981AF4E60
+:10F15000B2919F8E9F63DF191E6AC73C46FB200D4C
+:10F16000E9AC00F184F7FFB9E8BF53E0CBD1B2C7F7
+:10F1700056C7213ECC66A46F4C516F5E8DF1C4A37F
+:10F180003318D1497BE0E5385C3F8E83F9812F4409
+:10F190001BA7E2571FDE82EBD965A771CA1F671351
+:10F1A000104F2EFFD1B18FDF46F06D711D88653D88
+:10F1B000E5F088C7750D81937B86056C540674E471
+:10F1C0003FB9670EE9180FBCFCCFBB3E7E8AE1BC9D
+:10F1D0005C2EB408FC36F3D75F3CF1EB05289F7F2B
+:10F1E000B1736BC10750FE60F583E9F550FE7CF505
+:10F1F0004D5B6F7787FCA53BAF5DBAA30DEAC37E7D
+:10F20000F8D3279F43BCBAF6A7FFE7395CEFB57F79
+:10F21000FBA313D67F59530243FA96EB33CF93C621
+:10F220005A148C8B221F25BE6CF5517DBECF68FF12
+:10F2300098E53EB6B702FCCAEB7F41F1E534D1FF59
+:10F24000F03577292ACCFBC17CCE573A1ABADA2698
+:10F25000DBA87D00DB039FA47CCD818380AD607F34
+:10F26000BB4FC1B83828481AC67B07C07BE4E7CC3F
+:10F27000ED26FD2A53E2AFE02B78CD81913FD04AB5
+:10F2800078962BE291C87F91DFBF312A9BF8F2403C
+:10F2900027D3F17CCB5EDCA0609EDAFB5EB7467ABA
+:10F2A0004103BB7F32D8C997AB3CEF22B7ECFDB925
+:10F2B000782EB055ABB72034EE2EA1D795BDE8A47B
+:10F2C000BCEDF77739B7939E7FE85A4BB87E58FA72
+:10F2D0008B3F3DFB3BC4AFF9B1845F66BDA543D016
+:10F2E0004777DDE6DE763BC0C7F71B07B7AB747721
+:10F2F00006D9E99A3B03F377BADBFD54C6D3B43F92
+:10F30000223F9F55154F7106195752CB3E5F83F42C
+:10F3100038AFA4AE18F5F7743C87BEA138F607CB1A
+:10F32000EC946FE053E2282F3D5ABCFABF843C6452
+:10F33000AC6E24AD83D58DC6F2FCECA66D767774E9
+:10F3400079D52CCE35DA7B9B9D7923C595FF6B143F
+:10F35000F72336E139D8C2CEC1F9FBB9181F8E7632
+:10F360000ECCEA2FA03C4B876328E681A48AC79B7A
+:10F37000E37FF616CAABCE235C5EA5D67FD980F4B8
+:10F3800027FD163569AC3B6EA6433F9BE8972AE202
+:10F390002C48C3A87FD78878516735A378516AFD78
+:10F3A00047FF8DF0D924C6AF798F8F6FB706F6234C
+:10F3B000BED438DD24773AFB256A78AF897DC5F362
+:10F3C00053D219C747393E13E3E3CA59D8BA53E3B6
+:10F3D000AADEA1EB101358201EF14771D0BCE9AB97
+:10F3E0006228AF55EA57A9F577DDAA8E308CA7A021
+:10F3F0005EFD7E15B7B7D1ECEC1E37CBA057919EC2
+:10F40000655E87ECD769637BD0FE0DD3B3480F638D
+:10F41000E1F30C31D4851FCD58B7A5D90D7CE2FDA1
+:10F42000AFCAFBD47139E04E19C5FD77080FA98F1B
+:10F4300049BDADC7B882DEC3F44B1FF20B9947D16B
+:10F44000AD27D586D94DD93DFBC97C35790E129EA5
+:10F45000D1FA3F3F499F329AF4AC008DE315C3586F
+:10F46000E29D99045F13BF04B6C5F3E9851E0A5AED
+:10F47000A4218F41EA95923F770ABE1BCC0A92DF06
+:10F4800050E6890F823E99D0FF86D149DD79F6A8F2
+:10F49000071D6DF88CE2EF35A887C2FCC1D59F1817
+:10F4A000EEA114954EBA81D66BCA97088BBBD27A5F
+:10F4B000BD826F4E519D94B7D2C9E234E45F9D3E48
+:10F4C000A18FFD219EF431C92FCCFCE11ACDC8FFDC
+:10F4D0007F5462E4FF33F5BE26BBD018A7AAF49888
+:10F4E000E2E1EF4D37F04DC97FEE44379F8AEE25BC
+:10F4F0000FC575DE14FCF26DA107DA591D3D77309A
+:10F500007E7F348EB553E96487A84C645D54BA9805
+:10F510008BF26B929946650AF350D99FD55199C6E3
+:10F52000783E553A6BA772103B446526EBA2D2CDCC
+:10F530005C162CB39946E550E6A1D2C35C14277F34
+:10F540002F21987118E037E37A26EEFD1EBA418725
+:10F5500073EAAC64A17BC04857539840BEB7F9FB2F
+:10F56000E9B2FECE0D3ABE9FC4DB6F7DFEBD87F0D3
+:10F570005E30F01BF1BE83BFEFAEBF7BC324EC6FE8
+:10F58000B3507DA7687FAA487F08CFFFE9D18CCE12
+:10F59000BBAC48DF36BA38543F53A83F1A5EEF3F42
+:10F5A0004ADF1E5E1F5DA83F16DE7F49A1FE44F8BC
+:10F5B000FB7DC5FABFF2BA8BF0F23D9B4EFA2EFCF2
+:10F5C000EC5246717CC39F3EAAF769C2C3DD8A151F
+:10F5D000CF3546D09B1DCF51453AD21C31587A7851
+:10F5E000DE4F30D6198CB7F462FF98E82888FC0902
+:10F5F000F070B8E2DD47F398F889E213F98329C681
+:10F60000B809E03BF95583ABB89DCE58E4F772DEFC
+:10F610000BE139D3C3FCBCD9A171A3EDC38CBF8767
+:10F62000849ED721F4BCF7441CB97BDF416BD269BF
+:10F6300047888EA3DB8756763A9C5FF6D8F79FAA59
+:10F640006D40D7C1FA1817CABBCE58F636DA69BE74
+:10F65000232A433DE352D7DB5638F50CE78B835C16
+:10F66000C867BAE7157CA6137F053DE78A3ED2BE80
+:10F67000D41C1CDEDCEE4812EB6A9A9C7C752EF9D9
+:10F68000F3B95E9F673B34731AAC337503F7AB264F
+:10F69000227D63E8ECE93FB8308ED63AC5C2904F80
+:10F6A000AD917E5E933F6ED3E415AE707FF09A44C9
+:10F6B000BF82F1CBF4402CF743A4307F2CCAD13267
+:10F6C000AD8CF2667CAAAB0CEB55ECDA5CA82F682B
+:10F6D00053DD6530EF81B65FAD403FE0A22A3BC508
+:10F6E000316CFAD4B3DCFFC7F33792059E37AF8B8A
+:10F6F000D10208C77E4EF2DBE6AD2928437BB7C9AD
+:10F70000999C8CB8985CB584FC864D4EED35BCDF79
+:10F71000E17359283F91B9744739E82BDB6FB796ED
+:10F72000211FCF78A628510D5BF789E673B1180722
+:10F7300079D465A1F78FAE2A752C71E23D46B017DA
+:10F74000A03CE03AAEA3FEBE15DAA0BFF19EDAE31C
+:10F75000AD97F5728E89657603DEC66BC67A8CC965
+:10F76000DF6833E905C34A1252E89C47B15178CEAD
+:10F77000239FFC8AECDF794E37F9D54B5B14CA8F97
+:10F7800009EED73251DF3CB17118E5BB34B718FD33
+:10F79000D1C10C9689F77DE6B72AA4AFAACD9F37D1
+:10F7A00062BFC1B9EE0138CE60AD6B802B8CFE1EFE
+:10F7B000FDE98F6351DE35E38535C223C6E342C2DE
+:10F7C0005E95F7CAE7BBCE55A3DEBFA8F55D0FC2B5
+:10F7D0003F49B710CD1CB5F9D3F0FCD74F9A45740B
+:10F7E00089F7B4508FE9A18FFE15D619763F614D88
+:10F7F0004A761CCE1BC25F3D11F77BB2B590F4A3D5
+:10F800001D2DA5741FC03CCEDD0DAC1DF5D6350DEC
+:10F810008EF648FAEFDD999E4CBCBF7D6AD3A4B545
+:10F820000CCEFFD4FE656978DF7D716B0C8B75F7AC
+:10F830006C7F72D3689A6F31DEA3C6795B67DA5149
+:10F840006E4C6B9B6447B8DDDD30FB99F0791E2A66
+:10F85000F5569700FDC5B73E4378E264011FC2F537
+:10F86000DFC7EB99A85F9CCC6111F33997962844C8
+:10F87000B7BF1BEFA1FB29A73222B7BBA984EBE7D7
+:10F88000C11237BFB76E656F2F4D217BD085F47ADB
+:10F89000A2A590E277368CBB0FC1EF567CD580F8DD
+:10F8A0007FBE6AE1074BE1FD9AE9D79DC172A4BD15
+:10F8B0008EF466F67B95E801F442BA27F69F150EA2
+:10F8C0005753581E21EA8FBAC1AFE161687FD85AF9
+:10F8D000D4801DF8BB6DDF69D2C3115FF530FCA584
+:10F8E0009F51429F17F92169A3E8DE1DFDACB9FACB
+:10F8F0003A7F00CAE32D0B1D91CE31FAFC61E3A2E1
+:10F900007E3B99E9B161F383540C905FDBCBE7EB6D
+:10F910006E27DE8319AAD3FA845E6E7EDF4D6F5B9D
+:10F920008CF4B94D9C8FD4CFA3ADF7077E63BF177E
+:10F930003038818644FBB5067AB95C6D5F817115FC
+:10F94000F63EE7FF60D7314F84385788CFC2DAFBE5
+:10F950000BF8013CD7A6CC22FB24DA3AECFE437A22
+:10F96000D68890FDF68334E3BA64BB17C4BE62FC4C
+:10F970002C604BC43240F73962A03FCAEF2FAA6E09
+:10F98000735D1D812E6469E65BF8E30E8BFF98F9C9
+:10F9900004A2C150A98F58787F3D8CCF25DCCFF5CC
+:10F9A000DF935B14D27FD76FE279145FF8A14ECA60
+:10F9B000053F27542DBE11CA8E33ECDEE192175B52
+:10F9C000EEB9DC6D80DBA2F0EF999C79F2276FE352
+:10F9D000FB8F9EFA8907977B57CAA244CEB78E2D1C
+:10F9E000C0794E5D61277F0CFE38247E40C3A5FEA2
+:10F9F00018031EAEDFFBE496052877F63A344CC7B1
+:10FA00005BBCC5F83E262D6C5F8CE397CF00A760EA
+:10FA1000F64CA0A3A33FFD57BA1F1E87FC13E97144
+:10FA2000550CDD0B33C3795C49F77746086F1784B3
+:10FA3000E250741F44D2D5F10D4DA7541867ED2A3A
+:10FA4000BB9BBEA760B2BF8EBA67EA6961F161FB7A
+:10FA50002A7E4F9385DB89D9A1FDCB718FFA163AA7
+:10FA6000DCCE9EE3F5C0BB28E3F529D5BF46BE98A2
+:10FA700056EA6163281EBD90F65DBF67D5D137A0F9
+:10FA8000CD3D715EEB987EB8FE21A314BC2F63754B
+:10FA9000D3BDC1E6664B2CF2FDD6766BEC50847775
+:10FAA000B385E47C6B7B4ADC50944B4E0BC54F51C5
+:10FAB000AEA861FEFDD16338BC42F2C39318AEFF1D
+:10FAC000C4097C3C952BF49FC95CFF519EDE477AAC
+:10FAD00047F31A1EA792FA864BE08FAB99C721A372
+:10FAE000E93FC87870DD09C58B5CC8D7D624F2EF32
+:10FAF0006F2C9AACF9F03EE7554E467263305EAA21
+:10FB0000403DCBC9FCD3601ED5C5F51B6F2B237DB3
+:10FB100026D9E9D410D4A96D7E1FAD5BE774E680C9
+:10FB20007F08CFB85C9DE1F856935E6137E90DAA76
+:10FB3000A9AE8D11792B428F6042FF96F1E0848D42
+:10FB4000BDE70149BF6EABF04F80FEE4A37B2325E8
+:10FB5000CC8F78CB74DD9DD23F6407A489EF1EA5BE
+:10FB600095B0ED4D61F127457F95FC06D22F29FD1B
+:10FB70000FD2CF31A204ECB5C4307FC44B605AAA77
+:10FB8000140F9B8E789205EC80ECC93CA6F0EB1923
+:10FB9000DF524FAFBFB8B8CF432FF3FB41CD9638FC
+:10FBA0006D4756CF76378DE3F8167700F6867AEDF7
+:10FBB000F50EBA873345DD4DF7EE371759785E33CA
+:10FBC0003BE4427D60E118CE77B34A3D0BC6503C22
+:10FBD000D593857803F0F0D9F0FE9EF0DB66DC91DA
+:10FBE0001D87FAF007034E6F42BDDCB7C642FC46E4
+:10FBF000C231ABD1722FA261587C2E602D08C5D9BD
+:10FC0000D67BCEF9F0BEF0B5E3B8DF356EE6C9FDC0
+:10FC1000E8075D37D4427EF6BB12748ADB01FD38FB
+:10FC2000541EAF7B0DE36D2DEEE464FCEECE534924
+:10FC3000FCBDFC7ED50309FDB787E797948EE3FAF8
+:10FC4000C8034A647DA5EF3885E759ED0540F621E4
+:10FC5000BF16B7C77D5F54E9CEB03AD21EF4FF1786
+:10FC60001FB7A75BF67E51E51B4A7692789F534DEE
+:10FC7000F63AFA18E1FD89BD2F55F9A0FE4856E481
+:10FC8000797F2BE67DE475EF60D467837B017FFA93
+:10FC9000443ADF00B394D0B89918970AAE8C991DF6
+:10FCA000E93B3683C6F37D6E8677317D427AECE69A
+:10FCB0002AB39EEA277E75BEF6F8414AD306FE5166
+:10FCC0000CF490C422F3CB0BEBAB5A1AEA9D4D2BEC
+:10FCD00095B5C83F9A405FC5B860AACB4EFA6A7323
+:10FCE000D28F27E1B99CAF652EBCEFBA03D43EE4B6
+:10FCF0005FE857C57BACD3EA399FF1BAB89F15ECE2
+:10FD000038CF55888F03AC848F527FB55671FE7300
+:10FD1000450CCF47EE4C7292DF34A99EE71FC7FB1C
+:10FD2000409FC5FD4DE6F9C33AFC433E24F55B67B1
+:10FD30009ED590476C37E5195B4D79C5FBC718ED2B
+:10FD40009984E2A25EF5AA97C0FEC575EE03FE8314
+:10FD50006500EC602C5F06BB1DCB57C06EC7B8C1F9
+:10FD6000AB0DB954BED6A0D1F3371A4AA89C981946
+:10FD7000A4B822F991C97FC3020AF9F1247E7D3A21
+:10FD8000A814EA4F4DE2EFFFF3853B1FF50D82F714
+:10FD900029A2BDEFEA6AC4D7EE3AABAFC6F6356921
+:10FDA000BC5E3DF6C7D5E8FFE99AA27F88F2AD9F19
+:10FDB000C5337F0DB6FD498C16C9BEAF1D2BE47946
+:10FDC00014FB9DE127128CFE9CB3637AF1E73CA003
+:10FDD000F075F4DDF7D2C348177D665A3D88C799A0
+:10FDE000D9463FFFD563395D3C3896F39FCC3780C9
+:10FDF0003E7A81BBA48F68EF9BF6020A44A02B5980
+:10FE00006E4E6013E87E76B57D76A43CA7F3827FC4
+:10FE1000441DDFC9DC312343F4D6E434D35B90E2E4
+:10FE2000BBE7EB6FDB8FF2F2BBD31B23FB3058AD8C
+:10FE300093BC0E02BD213F576B39BDA9567E3FB31F
+:10FE4000E64DEE1FD981F485F970486FF0EB341F51
+:10FE5000AFA79AE8ADC94C6F4E23BD0591DE60BCDB
+:10FE6000241FD72FE2ABDABF577A1B39F6BBD1DBA1
+:10FE7000BF8F0F525E436756DD0084CF66F13DBCF5
+:10FE80004BA5C337C7DAB93C18AE935FA0597CFFC6
+:10FE90001058CC06FCCECAB4418DD66480DF8C9459
+:10FEA0007CFA0EC16D63FB0B3A39E4447F4DE224CA
+:10FEB0007DDA58A4AFEBCED0FDC67E164EBFB5633B
+:10FEC000BBAA90FE32D674CC9C8674B75225396991
+:10FED000DED78B1338DD35297C5E38B901E171BD81
+:10FEE000B963393EBA5736290ED4C7E7332D278B6D
+:10FEF000BE2B43DFBBF997E6FF74E1B82F4EE0DF7E
+:10FF0000737137BE97E4E5FEB534B4DFE84A734158
+:10FF10004F7A849F765B7F033D2FC47D44A3E70B1C
+:10FF2000F18FE01845C085511EB057DCDF94719108
+:10FF3000A8F46CF2E346F51F0E8FFC5DCAC9E3F925
+:10FF4000BC4DC2FF6BD6F7E4FE0F4FF2FE6C2C8C5B
+:10FF5000A3385FE57EE07DCC8DEB9471B3EE3C235E
+:10FF6000A91FFA98BF09F56D2BA832FDB9BA81E334
+:10FF700075E71F093D7159A9771D8EBB9DB9F7A380
+:10FF80007C736A3C5FE1F949FA7A82E7B7D4034BA4
+:10FF90004AF57B71DC6878B56C9AFE406FEFD957F3
+:10FFA00030CAA8505C6BD24C2BE70BF58AE003CE2D
+:10FFB000B576A86F4E027EE646BD9DEFDB057CC39D
+:10FFC0004D7686D18E988ACE48E41BC84708B8FA89
+:10FFD0000CCCAB4C14E387E475F020EAA54180ED2E
+:10FFE000BDF02AD1C7E575D39B9CAFD881AF505CDB
+:10FFF000BA84DB09F25E507C9E46F697AAF76E3F04
+:020000023000CC
+:10000000584DF6FD9EB1C27E28604508B74C8BFB6B
+:10001000BE31F0BCF0C12987C7C0E3E26D8BFBA203
+:10002000381DBD7D4D397EEF6BD913A7B6A39F74E4
+:10003000CC7FC430F15D35CA33F83BCA193A97F327
+:10004000FB58B5CF8AFC2A321EAF19CFE59F8CB37F
+:10005000F682C7EF131E8B38E725E0B1F302787CF8
+:100060001CF135021E9FF88E78FC09F6BF170F01B0
+:10007000D61D3B4DFFB437BC9D3A55FFBC377E1AA9
+:10008000163FE0F943AC96EC6719BFEC015794AF0B
+:1000900039BDF8A5D6ED88457BB6A976C7EBF8DD66
+:1000A000C7A67A6E677726688E12B46FDE55E97B35
+:1000B00056D1FAA3DDED0366B96A3CCF8F3EB0326C
+:1000C000263011C6497772799BEED419E68B5B5DB9
+:1000D000419B3701F5350F43BDCD9E6261BE307F38
+:1000E000CC48DB2192CB9D20C7913E803E39BD2577
+:1000F000F171A47C9EB8F23E8CE4B0F15DC0FBC20D
+:10010000E8E4F5BD25E4874B287E6E05F653ABED9C
+:100110006EC4EF897F05B91936CF24D044C2EB579E
+:10012000390618C699E2CA32BC9F96F603C3FBABE8
+:10013000015FEC14C7E6F702A55E33DD9D6F68979B
+:1001400024E21C3FCC1D6318CFAA7E75EF68A47F04
+:10015000A1478C837FF45D5E93BE60D627CCFAC343
+:10016000E82B8DF75D4658451E9A95E7476C660E5D
+:10017000FA2E05F041FAEE414D284F80E864843DA7
+:10018000B8E36EF4ABCC71683E78D6BCF7EAB4F94C
+:100190004521FFD9E67AEEF76BDAE3D88EF4B05555
+:1001A000D0A5A4AFBC84E37318C9753B43796CA692
+:1001B0005799EF24FD05D29FA0D4723FC3D90959A6
+:1001C0003CEF48F09FCD55DCFE7D4809C42A4338FA
+:1001D0005DBA9343DFA74B638A6F3AA76F3D59948B
+:1001E000AAC8479579AF380EDAD9697C3EF61ACF9E
+:1001F0009B6CFC67ECEF62BE41C29F91911CF25375
+:10020000607EC2CDBC9F6FBAE83758E45BF6E1EB85
+:100210000F4C11F38D8052ADD3857FDA4B650CC640
+:10022000C3A1CC56B438F47F0C513D14684914F185
+:10023000F574114F8F57029C797C4B3E3212D828AF
+:10024000E625B064FE7D91D25F38994AF461DF8182
+:10025000F2E8AE63DA3BC5F0BC39E1C76F4D84E725
+:100260002DEFAA1AFA49EFCAF07D80746D0564F08B
+:10027000915FCB331FCF4DAD70B8A6413FD5B7BD11
+:1002800011E3BB23EDFEFD749EAB6388DE83D00FCC
+:10029000F1616B02D029E22B7ABA4685F281641CA7
+:1002A00023384673A01C0D623BEE6F36F83F23E403
+:1002B0009B90BFD42AEACDCE1DA4BFAF4DB1E317AA
+:1002C0005331BF27B31EF1B25F1CBF7FCB78DC6018
+:1002D00030FE12966F6F7745F66B82BE4670083619
+:1002E0002E4DEB4DEF8A1A47715A02F6C48B8FA33D
+:1002F000ACB9F13A7F206C9D72DF6B9D3B9405ECAD
+:1003000052E667C6384A2DD363474488A304FD0AE2
+:10031000AE73702D8FB30C16FEFA6F1B47A99CC0ED
+:10032000F5C74B8DA3C8FD5E237E9F01882DEE1976
+:10033000533C81CECB125A5F18FC1E277E44B82155
+:100340005004EA3F12F5B77677FCE949F8F5CD5D40
+:100350002FEFC652EA7133C5FB6B877DB90F73B7B8
+:1003600066AE5B21E258C6F8C33560D585FBF9F16E
+:100370007B01E1F599A6F5945A8D7182C94E63FB14
+:10038000A929C6F76583627A9C1BFAE569BF4ACF43
+:10039000FDDE157F0FE3DF9B0A3B07F5C27507E61D
+:1003A000CD61DCC7DD134FC2E3009EDF58597211E7
+:1003B000E28B85F4D2ADBEA5F75702FDAC0539CA74
+:1003C00079B1DB407FA1B847998EF824FDFDD1E8D3
+:1003D000E9B8339BFCFF83EBF7B74FEECBBAE300F2
+:1003E000F7C4791DE3F07B41CE730AEA2183EB5F0A
+:1003F000A1F7D7CD29EE158F72EA0FB44F0EFB8E01
+:10040000608ED56341FB39A7FE557A1E559FEFC913
+:1004100047286F2D47E085CC0BDC8A798100F79C5B
+:100420005AF17DE0B6DEF3DFA43C6C0ECBEFA364A3
+:1004300006B7C2C2C79772AF873F9D71BFAF9CAF6F
+:100440003B2FD0346FB7FC7371F9F7FC24AF36AE95
+:1004500038EC5E86B8C701FB8E98073A5AF8B37B32
+:10046000C963E37667C56B1FE0F8976C7746197729
+:10047000626630E23DA9A9C26FD5191BCC40BF41CD
+:100480006794BF9BF0D094A93F1CD78BBE8B79B3E8
+:1004900008CB68EBFCB679B37522DE24E3AD327F7E
+:1004A00056E6C55E287FF6BBFAE1570A7F40E93879
+:1004B00016310E615EEF6DC23F9E55EA598178118B
+:1004C0002DFE20DB7F30C01ED12F7E6442E4EF0E74
+:1004D000C8FC50586F4AB81D24FBC9BC7CF3786037
+:1004E00017AD1917E60FF436E690BF2FCCDE92F960
+:1004F000B0441F9B851FA29B0ECC7AA1888798F5DC
+:1005000042191F51AAB87F02E8A30DE745BD0BF3BE
+:10051000D2A59D27F34965DE28E685523CEA5BEAD1
+:1005200055DFBB3DD53885F2BA9A5CA5AF7D177B08
+:10053000EADF2718ED29AF93FB1DBC684F0DEF696B
+:100540004F15957A5F447899EDAAA33FFB84F26337
+:10055000C10EDD37EEFBE01326FFD4DC311CBFA556
+:100560009C96FEB4FD432D06BFEB5475D57ECA178D
+:10057000AFE5FE9674BD9DEC34BBD3EE467F8B7524
+:1005800032A7235B1EF3EB3CCE4BFE15995796EC3E
+:100590005C12F1BEA9B41383D24EF4F1FBA99D6F96
+:1005A000F2B86D3CFA5BB06119976BD2DF624B1108
+:1005B000FE16533E76BCC9BF62F6B79C1E27FCB63A
+:1005C000C2DFF288E2BE1B49FD575BA6FC0E41F17B
+:1005D0006F0F2F8E4753FF79FF9A1F0A7FCB834EF1
+:1005E00058DFDE0F8CFE1673FC2B42DC8B9C57838E
+:1005F000C6FF8EE26E12BE926EA53F2BBD9E7FBFE0
+:1006000069AABA5B41FEB2D9C9E1ABA23F2B25E48E
+:10061000CF529EFE53B75F8AEEE3F68893D7BD8E26
+:10062000EBB402C3591FC9BF25E06A8E4725D68B9C
+:100630007BC0DF933F2B79BC11BE050F16DE87DF31
+:10064000352EDA567E18CB51DB6FEB3B17CA92275B
+:10065000EE2BC7F22FAF07B350EF34FBB114047E7B
+:10066000714FF89AE128F1D45B2BF1D46927BAAD28
+:10067000E27034C32955E7789A03780A2A4237FE94
+:10068000752671FA4C9FACBD86FEB5C17956160928
+:100690008FADF5FC7B59128E5B051C936B97909F79
+:1006A000D08CA783DB2E0D3FC79AE0F7EC96C2BB38
+:1006B000116ECF3D5CFE3B2C7FEDBF2D1EE1B6E7FA
+:1006C000F1FB7E28E03780BEA76B82DF03F811E9DB
+:1006D0007E3DE13751E3F6F5E7A5DEB2F100DFAB91
+:1006E0008143A03F64474B81C3180732F2D3D4EF54
+:1006F000C93F15ECE6A7ECED9C4BE0A71F9BFC5314
+:10070000A93E4E37A9BE63449FE9409FB1E8AFAA16
+:10071000E57A24887D7FBC823637E7AF52AE21CBA5
+:10072000B180F0D9EAE271E7087ECA007DEFD7C454
+:1007300087D181138E772057EB107E52DE6DADE5A9
+:1007400071B4DBA678568CEF178AAB3D3F49BF6D7D
+:100750003CDD5FF8D6FEC77FC6FED2FF08784AFBB5
+:100760005701DFF1FBE657813C41FBDF5A1BB4A187
+:100770005CA9A9BF55F142D9E74A4E3FA9695E86F7
+:1007800071FE9EFEBA6002EAED138776E3C37A9C9F
+:1007900047E2C3C895E7EF433F57347C488F92AF99
+:1007A00074617C2835C8D7CDDDF850B7EEB2948B94
+:1007B000C787B809FCFB11DDF820E83FB536F82003
+:1007C000D2AF55E083D5057C0CE0A1221EE485E282
+:1007D0009E921E8222FFC00C9FA06F48943C8415FD
+:1007E0004A492FEBBBE8FC03110F6D12F1506F3D2E
+:1007F000CF97ED5C1933D5987FA0D1BAA739EB9488
+:10080000F03CFE0879B22FE3F9C938A78C6B7E5E05
+:10081000EA79059F4FCCE5E71C8C1E670AE0FD5680
+:10082000403F9709CFDF223C97F70F841E77DB14F8
+:10083000FD6D1C7784DD4F79CEA0EF1DC6765BF78A
+:100840003EC9BFB72BFC90322FEF3BFBCD12ED7EA4
+:10085000BC2F29FD669B13EC3BF0BCE7B3E014FA18
+:10086000CE2FC629D0EFB43186F21A172A6078232A
+:100870005FBCCAFBD1788AEB79281FD75BE170A1F6
+:100880009EDF9C34350DF946CD5A95E47A34FB460B
+:10089000D25B0DF01BA2B77ACE6F5201BF08DF7C8E
+:1008A0000AF19B74E0379CFFE80CF53A2BD29DB31C
+:1008B00027BFD9DC0BFC2F92EF7C83708FC077941D
+:1008C00009C506BE6399F01DF8CE4FC6336E1F8A68
+:1008D000FD633C80F68FF415BE7FB33EDBBD6F2316
+:1008E0007D49BAFB5F4067232744A6B3FC09DF8D2F
+:1008F000CEC662FF087476E504239DE913FE67D235
+:100900005905E1DB05E8ECA3F14CD8B7D71AF48A16
+:10091000CBD5F6733938FFFFE7FCED8357723BFE0A
+:1009200042F9DBF87331FE53733EF73FFCA9FF6BCE
+:10093000FDA9CF4EF81EFCA9AE716EC23FB35FF5A4
+:1009400093D1FABE09BDC495259FB64A3E0DFC1849
+:10095000796F0DF033E4CFA9555D9F3ECFED4D2D5E
+:10096000DE4DFE86D771BC74C1AFCD7C19F4CE3795
+:1009700026FC1DFD0D7F2FBFE14AE167BDD07DFB49
+:100980009502CED1EEDD3709FBBE09C6C07B7A5B8E
+:1009900057DAFDCDB0608FD0AB47D45E773512D932
+:1009A0003BCBEC71C15EEC26F977245A1BBC2F9E21
+:1009B000CC09DF1F8B28B7BAF767D293C3ED26F7B0
+:1009C00025D84D33261AF5646B2DB773AD20EF286B
+:1009D000AEAF9704905FA7FB94764C0DF6A6D42992
+:1009E0002807536B3D940F7FA9717D331E458BF310
+:1009F0007FDF717D73DEC0FF94387FD14461CF9B70
+:100A0000E2FCD2FF6A8ECB8FB0B796917CADB6E098
+:100A10005FC060CD7B3FDE71379EF71C07DDD330B2
+:100A2000E703448BDB8F48B607E3B3A3C7EFA5BF4B
+:100A3000E0115BDDEB68873FD268A1F335E70DE499
+:100A400025F0FCF1B313766DA3FC1FA90F57093EE7
+:100A500053AFD8E9BB8E557EE2335E7D5723C693F4
+:100A6000539DAC1DF5ACB8896EC23F354D273E6332
+:100A7000ADF2125EC9F8444D26BF37172BF04B1D5F
+:100A80005AF7168E9F7448D530BEBD119B02CF48D1
+:100A90004059897AC4180BE545B42975E4F76855BF
+:100AA000DCF4F73F92F25CA41F3D95A4FD7E36AEC8
+:100AB000BF1FFF3B2507A62F49433EB8B6B1310DF6
+:100AC000EF27DE3491F3877BA79FAEA6387A2EE816
+:100AD0007F0A9586BF672BCB1DBA22FEDE929FF25E
+:100AE0001161DD5BA8DF503BF9D954FD81DB900F2C
+:100AF000A8974D25BC6E555C7316E079E5D8498FF3
+:100B000069CE19357B11EC6B5D3F4F59169E6BD248
+:100B100050DA677352FF44D447D70DC8A6F95B1467
+:100B20006F5916F61B6021BA56457C7E5DCE92D772
+:100B3000F0EF8034A55B18DE3B68CB39DD82EDDA5F
+:100B4000C6F03F82635EAFEA32DE93C20F1F21FF21
+:100B500056D3785C5C157171D514572ED51599FF55
+:100B600048718758C1B76A7256CFA6EF2738ED2E65
+:100B700044B2A6846025E1C74A1BC3381DB3B61A28
+:100B8000F4B4BB1B8CDF7F71E619D7D3D27D3F2134
+:100B9000CB8B7C86FE062CDD5F48F2227E20BFE5F3
+:100BA000497FF1BC1E2BEA019BD717E17CFE51FE69
+:100BB000A3FC47192AFF2F0D22483C0080000000AB
+:100BC0001F8B080000000000000BC55B0D701CF5BA
+:100BD000757F7BBBB777279D4E7BD2C93E816C5614
+:100BE000B6446410F25AB68494D8684FDF322EBDF2
+:100BF000387C88C476CED8B8CE34932A4E49EC845B
+:100C00005667EB64C95FB2A414E44C3AD3B34932DB
+:100C10006DF08042661AF33967700821D028811080
+:100C200032930461885B529A310127A2434BDF7BE8
+:100C3000FF5DDDEDEAE4AFB81331CCDFFFDDFFFE91
+:100C40003FDEE7EFBDF73F00F0C00200D90F003AEA
+:100C5000C0A6224F122200E7AA200D95D8F74E9782
+:100C60006941800FE9AF25DB1EE807C8F8B2FD60D7
+:100C7000AD0A660DF0DF87A271CD3B6E5AF3C29FBD
+:100C800073DEE16AB5371D9C3BAF3DAED594001ACB
+:100C9000F2AE03D225AD73E6673A8E4FFE4C866AFC
+:100CA0007DEE7AEEEFEDEF3615AD2F86DAFFBFF170
+:100CB000F3D175A9E90128137D68C47353BB44744B
+:100CC00075A48302820E039D8DE90CFE73424A0CCB
+:100CD00057D2F9C21EE39B30970E762B6B73F897B1
+:100CE0009D5F16D347ECF9710BF2CE801908D12B1A
+:100CF000FC0E69AFE1B63F449628110F3F076BBE6B
+:100D000028C0B31FE2FE8E67F905DA82ECBCF2065A
+:100D100095C72F57FB5E6C5885CF5E918D6FEAD9D2
+:100D200079793F95C00B80FD5D65F6BD62ADFB91A5
+:100D3000232A64ECF1F8FF0933CC749AD8783F2465
+:100D400090BE3FDFF089E2441E39B0DB6569E7F70A
+:100D50006FE09CC07483F437F1DFA95F8C4ABCF864
+:100D600009F13CB5424BEFC7E7FBA5F4FEEB68DCAD
+:100D7000DD82BE361F0A2D3EE05FB40AE9E8B5F811
+:100D8000E4759F0BFF94054C278B38397C58C27350
+:100D900054D1B907ECF974230348A703CBEB56EC05
+:100DA000D7E9FCA3FFF26DDCC791E37BDEFA36BE28
+:100DB0000ED4D68D34E17E0A0C8F21933C7FEAC499
+:100DC0000964170CD5DE334AD36E1D954C0DDFFB3D
+:100DD000B5E03199CEE8974C9A4F39BC90CF13DDEE
+:100DE000EA948309C958504EE71B9380F85268383B
+:100DF000DFFBF49CF3E0FF4788CF2C9F39CF916E47
+:100E000048BDDEC9DAB9747FC5926705C727ED7999
+:100E1000912EE35EFD16A2F3F83E199238E5F82E06
+:100E2000548AAB007E6B4E7E7A3732FD9E412FF3A3
+:100E30006122A6A6251C3F51A4DDDE4BFD328F7139
+:100E40008C898AFFE3B946975DCBE7B2D7FB6C8B01
+:100E5000CEEB8DC51694933EE2B8F2F80D73E5CF54
+:100E6000BDFF4B95BFED668925EFA340F3C3E42D8D
+:100E70001ED227BF35E63A79B27E09ADF7731984E1
+:100E8000DCF441BC682E7D06C91E7C242B27AA25D4
+:100E9000477B23EB7F4CD3CF27CF6A7ACAACACA376
+:100EA00075A08FE8BE2CEADC9F3DEE7316BF7C690F
+:100EB000C87843D4664CA8A376CA94B03DB7E10B7A
+:100EC000DA5A7DFE757C90336F25CD077C6E2F241A
+:100ED0009858C4573387AF7B0AEBEE24BE0CDEACC8
+:100EE00002CB9F9BCE17E8AB4AE6A4142279F80800
+:100EF000CB4712E5A31AE7F1469D72187F72154C95
+:100F000007059F92FCBCDB243E255ABCB376C89FE4
+:100F1000632F41DFFD1B19E7FB6AB7AAEFC77D7E90
+:100F200035BEEDBEDB48CF5F900D89DFEB6C0FEF78
+:100F3000B1D680D109968762CBEFEC3C71EF6BCFD5
+:100F4000138FBAD5D7896EA4C7B37411F6D9F43705
+:100F500066D73BDC747A7829D221359C7FFEBB4A68
+:100F6000F5CF11FD6C3ACF37EFACFDDE7972B27D73
+:100F700065B63F529008C4F09C2341038D00BD3FED
+:100F8000C5EF6115CA65F9FCFC448AB23CBC46FF5A
+:100F9000C4713DEDA616C3BE7C02B7BE1CED6291C6
+:100FA0007ECB7A7CD511797D23D17F6BD0A3C939D3
+:100FB000FA3570D00B99201102D745B95B07D31BC6
+:100FC000D7E338A8F2B29CCB9115FC7C4B515CF175
+:100FD000607B6D6C09AF677FDF03FFA0ECC0E7CBE0
+:100FE000BDDA2B2427A988443BC2E74840DCFA5AE3
+:100FF00005CC10B65D7ACC4F7EADFB095A08A02512
+:101000003C1E21BF54F7D8918A04E975D29CAA41AD
+:10101000FE842D765DEF9B8AB7E17C032FCAC61E46
+:10102000EC8783DBD601CA91F47090EDC400DA79C5
+:101030001FF25D0976BE45CFD79C0568CF91A79674
+:10104000193FB4E7D8BD18CE9CDB6FF3973BC6774A
+:1010500068958EF732984606E9D4155DE61857D4A0
+:10106000B04AA3FDF6E82B1CCF6FAE69767C0FED7E
+:10107000CAE969ECAFC6FF88EF32883EBFAF249C57
+:1010800080FD9CEF15C8E9E3FBB5B1A2C819724A0F
+:1010900037C28DA447C8976307C8FEF4FAD96F0D0D
+:1010A00078E184540CA4FA49A827629BECEF254B05
+:1010B0005E93B14AE693147CF67D96C327A63D84E1
+:1010C000B3E031A827FBFA8F9A7ED28343AEA629DC
+:1010D000F1FB280ABA8E7C4218960CD4F37373691C
+:1010E00009F93929D983FD45382E2A44119EA37167
+:1010F0007ED8FD15310E16D1380D9215D8D70C2893
+:1011000020BE56E03C9F2DE1EF923DD677D788EF89
+:1011100092C52562FEBA7AF6A3990E6C8F82013EC3
+:10112000B63F71044D6445FAB8BD867685CF1F0081
+:10113000A39EFAD530CD760AD92F517F214C6AC2B1
+:10114000C86784DD9E56C267FCC2EEE7D397ACDE6B
+:101150002870C6E6070EBEBDC5FC12E9CDED773698
+:101160009C1777283B9F71E8ED23315DF8C39D5DA7
+:10117000AC27CACE67F9FD4BB1F81E9A8F48EFAF86
+:101180009F4BEF3A350364BF523130923845EAD174
+:10119000B5D1CDC8DFE4A37EA31AAE1C3F2E950FB8
+:1011A00069D00A88AE72DFE5F201D8CF074FF88F19
+:1011B000EE676134D94FFE097CF9F6E5F0C5CD0F35
+:1011C000B8B714A0F9C276F4EB5226202D657A98B0
+:1011D000D1FA2CFDB19F5C66D1ABC4E2872CDA8CCE
+:1011E0006C3D574AE6E70BCD575A92E5CF85F8128A
+:1011F0008DE3FBFA2C7FE43E938967FB691F9C65B6
+:101200007CBB4432985F4BE5B887FA8552C6023DF5
+:1012100069F69B21D0983F57411FB711EFF466C67E
+:10122000C33B7121C2B31FA097CD89C752C1567F5E
+:1012300025D9D71AC5F060BFB6C8134F231DAF56C6
+:101240002043E72B572049F61C9101CF9F7A14BD0C
+:1012500015FA9914BA690F7DB7CB9F4E49D9F5EBB2
+:101260002CBBFDE3A26F69D3B5593A9F26FBB55C51
+:10127000D0C3C3F6673243DF47BBC118D0E7DA33C8
+:101280001C97942D3B45ED267AD1CC744B86B02F1C
+:101290000DFFE07DC219349F82FDEFC512EF923F32
+:1012A000259C1E2C61BB345D48C07A2E2E30095718
+:1012B0006CB6D6E9BD495F1CC77D6E1EF6BD4EF308
+:1012C00041CAE7C405EEEF750972BFB7BF9B952B06
+:1012D000F7F797A907B0B3ECA27040ECE1D5C5D3FE
+:1012E0007970FB2CCE243D29CDFD4EF0498D24187C
+:1012F00077A8A42FA5179EC7EBC22FF63C5E145CFF
+:101300009AC76BE117DB4F6D83B35E65A9B54FA438
+:10131000D716B0FF224CCF4D16FD3E4DFE2A44F4A9
+:10132000C44005CFBD15E22AC9ED5F2184261CBF4C
+:1013300064DFD610E30568D7883E52E663F287D7AC
+:101340005F021D2D3A6DCABCE5D5C92EED2C823742
+:1013500072E337EBFDBB1B3E21E274BFBFCA9F1394
+:101360001F169EF8A09F8CFA9EC2BF7FB105B73EA4
+:10137000F8926CC895F45EE0E60008FF5D487A8A52
+:10138000FB2E7CE2CCFFD0F84217AEA69921675E17
+:101390004FE141C6B3852155679CED92331B47C38E
+:1013A000070207072DEAE5CC2B115EB6E31E9E5718
+:1013B0009ABBEE0D163EC757B10F2F02CFBB713A45
+:1013C000CCE273F13E1854859E609C9971C4C17A39
+:1013D0005E3DB3F76D7F57A6C62B8DDA3CDF5B7C95
+:1013E000A8A5401CEDC2C20A48EFC6FD0E0FEF884B
+:1013F00015627FAC0C748C3061A8F38B12E18DD632
+:101400008810A57093C085B404D8713CFE85FF4355
+:10141000DF5F83EFB755040DDC192C7C1B7132CED6
+:10142000737785DF30F1410AC4FB649347C4934965
+:101430007899F0E8568B3FDE2704CE64DEA01E1EAE
+:101440006C15F86AEB89CFAE23FE8E94DC6A64706B
+:10145000DC56B44FA584C746BD8CE710D73970BFA2
+:10146000AF290707E2FF771FF13AFA5E174E3CD02B
+:101470008A3810E5DBC681F7B702EB19ED8BFCC9A2
+:10148000955A078211B6A73728539E7CF9379B1FC0
+:1014900036FE7EB24CD0D9FB9EA00B06CC3BE8B901
+:1014A000EF3D118FA1010F362C20EF2FE8E76B40A5
+:1014B000FAD0D3F7843FC02F79DF26FE47FB76E3CF
+:1014C000619F0B0FBBF76BF3E1619B3E8DD048F43E
+:1014D000417CCE38C13E8FFB1C4F607CDE8E42F1DA
+:1014E00054BF9FDB4CBFC6EDD3FD516E4FF5EBD023
+:1014F0008E00ECD9FE1A6E9FEB37F8F9F3FD4DDC48
+:10150000DA74984B1F91D7BCC6DAB3523B15273F0C
+:101510007A55BB875561EC5E0FD3ED1CCA27295F56
+:10152000C8A0DC1B8EEFF6A429A4B7E39F8596BC68
+:101530005EEF3B7BD287E347CAC1D883DF2F6CDAEB
+:10154000C672B6E6AC27AB2740714E81234F10839D
+:101550005247BFCD7FB5637C87B6D4F1BE2436CD6C
+:1015600076AA2B7ABD639CCDE77FA2380BF737D6DE
+:101570007E5A23BAF6E82B1DE3947B91FF7514FF86
+:101580007CCC312FC8EB0CB2D3251B9C721872F1A6
+:1015900055DD7EFE38C8E6F3DBADCE78683EFEBA98
+:1015A000E5D5A66BC92C5D455C99A2B812E95AA293
+:1015B00009BADAE71DB1CE6BAFAB3489F35DE9F858
+:1015C0003244F16565BEF8F24D8BCE17882FBB9D76
+:1015D000F1A59BAE178A2F17B439EDCAC5D273D3C4
+:1015E0006291772B7941E6B845EEEE633F583A2594
+:1015F0001B5D64122D5C56443600C76D6A50D3845F
+:1016000033C7603A4AFEFCB0845445792BAD35CAE5
+:10161000C9CE3C14365EE925DCD823F280CFC46EF7
+:101620008F12EE18DC7D348ACE0A9ADB3C6CEF46D2
+:101630006367387FA1E8C0F90B6CCD741E7C628FA4
+:10164000B7F38D8737AA6909C71FB6F28D877B6606
+:10165000F38D5CDF986810F9C68FB6E9569E29199C
+:10166000A578E5AB1B1BCBD95929D8BF81861BAC0C
+:1016700027FB035A88E2E8D4468F46E79257DDFFFE
+:1016800005928F4352DFBE2A8ADFCA3C9C774D8584
+:101690001BCB37E3387913C218EA6F6C7C956CF674
+:1016A0004499BEAF8ABE0F5731FD0657DFEEA775CE
+:1016B00046C20B7A283F32D2E1611EC98433423CD4
+:1016C0004FCDF9E21E771D40268B4BF15BC4935141
+:1016D000C95F11FEC8C9FBDBFCDF1F56393FBBA544
+:1016E000EDC1A3C92A7ECCF66BA15D97D9D8CA7982
+:1016F000E6738427A4F9EB327BAD7CE7ACDF893A53
+:10170000F793671DC605765D82FE743B4F8B7FA9FC
+:101710005B3AD3E447C721DE4DF633193C7F1D44C5
+:10172000099EBF0E325FDD63579BC8A37E99F82EDA
+:10173000EA338E7A89D26DD545ACF8F530E5C349E8
+:101740001E5C75127B1F03D67CA9593972D54D5684
+:10175000ABD67C06E4CB5FFFA9F593FBDB44BDE68B
+:1017600052EB26DF6D03B15F2BDFEDB5F87F9D3CBB
+:10177000B983E4F1CF9DEFFE6EDB95CD77CFAD134E
+:10178000A5595FE0C4D93758AF972DB0F0CBF9EB2E
+:1017900040FB09E823FFC657202EA5FA87D54FDE68
+:1017A00020E675D78502561EE5876D4B45BC45F68C
+:1017B0008498AB188B89AE41E53B490DCF51101C85
+:1017C0008330B6BEC8E624B52D8B75AE0F8D2FF3D2
+:1017D000B0BF1A2F4A1C1DA4FD2F0BE6D58B572D29
+:1017E000FB376CD56F48803DA46F92AD1C90F02004
+:1017F0009F2640F0F9EDB6308F57B4D1A6BB506E9E
+:10180000DE247928E3F3E4ADFF9C6913F59F9CF98E
+:10181000BF41729AB226A77936E33CFF65C923908F
+:10182000E35840C18E58CFAF8F36112EF85D9B26FE
+:10183000DE2B2B0CD287F170FEF57E679D072815F5
+:10184000D398C5470B378879C02FBE3F2C9DED3DFF
+:10185000BD8AF9CAFA44FBA0F7EEFA977BFE408DE9
+:1018600033BE512B9CE33F983D87332E3A344F7D56
+:101870006C51BB90D796C542CE483EF6E4910FB767
+:10188000BEAB94F7A478AA3D6CAD27EC4E50996A94
+:10189000A57827580B06D71495937CDEF893552727
+:1018A000A657919D0F191407297E3495F5D938D183
+:1018B0007DEE0BC5798A02496FFDDC780FE7358B29
+:1018C000EB859F49E6CC774DBB901339371EACA40E
+:1018D0007044BF85EB785407A4FE2E5F6F3E3F5DDA
+:1018E000DD76FEBACE9138C61114A43E7C70DF16A8
+:1018F000ECBFAB79341F8FD1F3D67534AB3F5BD7D8
+:10190000895F5C5D67B4BDA4A7EA52EA3AF3CC3BB9
+:10191000EB8FE7D675DADBF19C6341515F99ADEB54
+:10192000DC1AB9A87C0E587EB9C4B2CB453D561C12
+:10193000B153E238E2E9867F3FB09CE4ACC1CB72A0
+:1019400000072720574FD66DD0BF564A7EE6551F59
+:10195000540BBB66D27C765C6CD34FB5E66F7DF0E2
+:101960000585C68F977B1A793EC8F83C5CEC4EAA79
+:10197000562B53BB5CCDC8C5346F095875F48C44E5
+:10198000CF6348ACDCF86064E6A76DC59427098294
+:1019900041266824A6ED2EA67F501588F04EA59E00
+:1019A000267BDBE62F74D8FF911E55D8D76A715F6E
+:1019B00066FCA4FEB5AD387E68678071D3A10A8F3E
+:1019C000D0AFA4C4F5E40ECD19F78C4F2E1178ECEE
+:1019D000A0D7A07B22C727C5F82DB1C6B4CCB8DBF1
+:1019E0001917F5E8CEB8684B79FD2B841761D0CB79
+:1019F000F978CDC2B537D738E3A4A2CABEE708A7A5
+:101A00006C1A1478786FB464C116B47FBF6AD71D9E
+:101A100071E2E6C1BBB96E34A802D7534736AAAC0F
+:101A20001F23DED78F6C61DC58C0749CD8A8962722
+:101A300072F4A5B4C367DD8B10F803E1656232CFA1
+:101A4000FBD20E617750B0D98FDBF2F2179F117481
+:101A50000E55405A271CD7B3234371E578059E09DC
+:101A6000DF0F46AB7A4ED2FA2FCB40E774CB6165DD
+:101A70004735EBE9AC3F6DF238E8E4F5C5FB687E2D
+:101A8000B81974B26BEDDDD8A73CC00615283FE04D
+:101A90008BFE2D9FB704FB01ECFBBB47930AF6FDC1
+:101AA000558995848B9FD975C7702C42FE4EE8B737
+:101AB0006FC3B6F82768FC2A2F04687FA04B51DA61
+:101AC0005F52DC6770EBC3DED4F7DB894F7B0D8997
+:101AD00059B4A967FD76BEB7142960DC34EA8D6F6E
+:101AE000667B749B5F4BB20F9CE638C2FB151F9060
+:101AF000DC4DECFA4D19E1EF1FB58BBA664077C6A5
+:101B0000D77E1865BFBDDA9CDA40DFAD6E52A9E220
+:101B1000014F379F61BE4D34F80C1FEE63A259622E
+:101B20003AFFA1C19BA6759E52A7645AF7A93FE050
+:101B3000DA95F9F43BBF5ED97AE41E3FD2B4DE4FAA
+:101B400072B117A66E25FA2467449ECA3D2EDE2187
+:101B5000FCD5DED46D350AE7B354AEB72B670DB3B1
+:101B600018670FCFC4FF9972AFC97645C449E59E87
+:101B7000A484F30DF5887B194345896192E721948C
+:101B80007B8E9322E23ED27879C4D89FB3DE78F37D
+:101B9000ED3564CF5E6C0830BE1F38F5377711BE67
+:101BA0006F95DFFEEEC3145755A8CCCF216FDFAB86
+:101BB0001407251B02BCDF538B54F0933D88DCF5E2
+:101BC00000C5D9707C03E4CAEB44B7D0D3890AA11D
+:101BD000F7D2C31B380E189764A6B359764C223C33
+:101BE000E6EBB6F34E22CF14B3CCD9C48647380FF8
+:101BF00075558FC8A3C6BAAD7C931C4CB25CDE1879
+:101C00007880F4DF54BC8EF878CD5967BC7C952B76
+:101C10005E76E7A3FEB7DDCA475879275B2E43D629
+:101C2000988926CB4EAFF2A5851CF6956BB573F55A
+:101C3000FBDF2CFC3CD5EFE77B643FEDD7B81F32D0
+:101C4000DFD95D8AF3BCDC1FE5E77FB9FAA894FB16
+:101C5000DDC8AADBFC3ADB93E928CDEBB6236EB9ED
+:101C6000D8DF5EE0F027F63E8B9A5BC5FDBBB36C18
+:101C700091614D70BA8D7D234C0573F17EA65FDCBA
+:101C8000737BDADAE729DAA78FF264627FCFF5EBAC
+:101C9000DC3EDF5FC3EDC60E10F500DB3E5C83F675
+:101CA00001E9D05E21FA640F88FF2591BB384FE629
+:101CB0008B2A1AE9BBBF623423E5D88789A2BE5FAD
+:101CC000DC4D76BF2CC8F2E83ED79A0E4FDE736D1E
+:101CD0006ADEC176E71CAE43F4473BB39DED10DAF4
+:101CE000055E77837A27EFC344BBC476A1EF6B7799
+:101CF000B05DF002C9B9DB0E9424857E277491BFD4
+:101D0000B3EF09CDDA055C278DEB3C8D769DFA4368
+:101D10006807689DA1E6D7FF9AD6FDC3FB057C2F17
+:101D20006A62E32B6C175E3C8736FB0ADA055B0FB1
+:101D30005F3B153B961BCF67F9BCFE8E13821E1AC4
+:101D400008BAF6C6F3C48997CA67302F0EC7A495A0
+:101D5000E93B45DD51653ACC5B774C7A0C4A0B0C7C
+:101D60004C2ADD56DD11A8EE68D71F73EA8E05CE2A
+:101D7000BAA39A4E31BE495B75C7DBD78ABAA35A5C
+:101D8000301DCCEEC3AE370ED2A3F26C7DFEAE8E0C
+:101D9000C4AE8E866C9D5197441DFCA598F9657A5A
+:101DA0000E9112F6FFEE3AA55D8F4478272572EA70
+:101DB0009B75F8DC5F92AD7FB9EB99F6BD8C3A75F7
+:101DC000FAD801A4CBC09D7EC60FF6FE061EFDE824
+:101DD000AB8948F63E805DEFB4EB9976DD13F73DB5
+:101DE00096BB6F7802D8EEC063FEA3E4DFDCFBFD98
+:101DF0005E2C717F47599E7D5F647D711D58F32372
+:101E0000EE227D7ECDA2A33DEE414B1F97AB22BFBC
+:101E10000D2195E39DD607832013CE2E528F915E20
+:101E20006C86E90EA2EF4058E0BCD4212FDBC9E359
+:101E30001D3AF3AF4C35F93E44D99703C66E9C2644
+:101E400075520B51FEA9A7DD3CDEC1FB18BD753DE7
+:101E5000ED03713BD9BB5F57DF17E17A3FDD7B2A8A
+:101E6000A6F8CF584C7990173AF2DF576A597C762A
+:101E70003DAF5BE4018ACF5201E339BE57FCA4C2F7
+:101E8000F3F5E014663DDF5F6A574B681E713F75DE
+:101E900020789AF9D552ED5BC179BDA2FC71E0B30F
+:101EA0001D226E5D8B73A938CF675A13DFA77D5350
+:101EB000AE34CA722CE2BB17C84E0AFB75AFA7310D
+:101EC0009B072B96132FD078382E29E41F7D96DCA4
+:101ED000D871E23BADE68BC477E48749EBDBF78052
+:101EE000ECF55FB2F890EC307F4AE35EB7D6A9D349
+:101EF0009231D2C3BA04CA83C4FAE3AAC30BB9703D
+:101F0000CBAB2D6FB375784B0E254DD46B51AE5EB8
+:101F1000E7FD3EA59FF448546F4F1C3D40DF5E66D1
+:101F2000BDFBEA36F32DDA77716BFC3F69DE5FEFBC
+:101F3000BA83EF055FEC3D8E96C57D51AAE30F0590
+:101F4000046E7E286638ECDDA24EC19F459D022FAF
+:101F50005D8F3233C5F74B0DBEF70DB09D71B46D7B
+:101F60009F46FB138FBF599DFD3ED50F93540F9A8B
+:101F70006F1FDE7D3B38AF3B50D1EA27FB83F6ADC8
+:101F800098FA43156634771FA92221E7C945226FC5
+:101F900041F9B464CE7DF2924E99CFD35601199295
+:101FA0001D5F50D4DD7CA8B83AFA1F9FD9C4F78BC7
+:101FB000F1F924A518AEEAD4455C1E31C0A478B36B
+:101FC000220EA4DF3E2DFB3DD551DB2AFAF8BEE5FB
+:101FD0007CF3C851FBFB047F7F53A7C6F3AA118F84
+:101FE000230F7021BAB9E9324874AB9E9F6EEA455F
+:101FF000D34DE89D9B5E8D16BD9E097F91CF071F37
+:10200000B4B19EF9343C27B6AB3B857D9183262441
+:102010008AC846C51141529EBD0FA80E6DD359D630
+:10202000049D65AD8FBFF3551890B881E89260BAF2
+:10203000B8E9807602C84EFCF0D12311C2A72DD892
+:102040008F0AFB013E6CBFDE21F862EBE93AF849EA
+:1020500050E4BF9DFEC26D4FEDF6212BFFEC7E2EAE
+:10206000750584FDD0C141F722EBF70BC786EB194C
+:102070001FA0FF4CD2BD98CEF2EA02EA5FE93AA275
+:10208000BB7EE8AE13BAEB8359B931FDB4CF77B557
+:10209000D3C98FE79117BB3D60E9DB60BF3FAFDE7F
+:1020A0001D407D27FE0D359B49AA1BED0D4F47595D
+:1020B0006E4EBEC5B858794136085F2A8AE073E78C
+:1020C000A269E663579309546F3AD0DFFB9DDC7930
+:1020D000BFDE9AF84A27CA49A13669D23C41C824D2
+:1020E000C9FFAC2D35FBF2E1A621CB8EBCD31ADFA4
+:1020F0004DDFD1B575E2FF9B31730FF52FD66ECD55
+:10210000A74F8A4DBB4BD6A7D3429F9A76B03E8D40
+:1021100054F431CE1AF9894C482A8B232D7D1A6943
+:102120003EC3FA6EEB55DAB63F4D422F288F40FE84
+:102130003B5461B2DDF896A54F0AEA09E993CFD284
+:10214000A790961D4FF9F136A2333E572AA6F9BB48
+:102150005093A57FA44F41BA3F0C8C038650EF28C3
+:102160002FE2D6AF962AE1379F684D3CD449F862FA
+:10217000D17ACECB0F55FCBE94F18B25FF59BC5BB9
+:10218000CFFEFCDCB0C7207DA823005D9FD503FBFC
+:10219000DCAB6764C8206BD6CC48DCDE3453C86D3A
+:1021A000CB4C805B73A694DBD84C98DBD699ABB94B
+:1021B0006D9B29E7B67D06F56025EAC34C25B79DE2
+:1021C00033D773DB35B38CDBEE99953CAE67660590
+:1021D000B76B673EC6EDCD33CD629D1A71AE3CFA4A
+:1021E0004065B02BA00F46128A480F3EF32ADB77DA
+:1021F0004DE53B4AA97023D7897CCA34EBC3B1268D
+:1022000061EFBB82824F6E7D78A735F1AB7CFA30EF
+:102210008B6F15D088FE2A587F2EFC80F8E737F4A4
+:10222000BD8D7BD5A8C97286F8E40CF1F37271C23A
+:102230002CCE5CAC321EB571E6C822C49995599C6F
+:1022400039D42CE2B2D4211FC76F5B2471BFECEAF2
+:10225000B6C47FB37E82C813256EF56B849B53E1B1
+:10226000CE6890F27A7B65A07C01E2900F789F4A5D
+:102270005CDC67BD487D7E3326ECBE3DBE0E4E7BEA
+:10228000FA2E01C7FC9AFED93CBF5D28B95C3FEB32
+:102290006D13764113762155D137CC7569975DB0B2
+:1022A000FD2CD2C3611796765976C1D2F3920AE11A
+:1022B0002F4BC82E207D9675D976C1E967151B87EF
+:1022C00074DB38C4B20BDDE23BC4ED0E3F8BECF6A1
+:1022D000430E2E46395ADE950787B03FCFF1730380
+:1022E00055D531FA2D41F82CC4483C4333FA5A23D2
+:1022F0008FDF4969F5AC07279536C8CDAF5CB29E34
+:10230000856DBF63B2DF718FB3F56DE8648F38A759
+:10231000E5874EE2F9CD1C7DEBD2843F42FF73335B
+:102320009DD3AD6F2D8BCD443CCF3E3FD925F0FEE4
+:102330008FD658B81771A511647C9F17377C92F817
+:10234000D7207EA7F118DA9F8EEE644AD159CF3F8D
+:1023500049EBAE6E9F92290F7453D3E8CB541241D0
+:102360003DFD5457C3E5EB6953AB55EFDB592A2EBE
+:102370003B5BED85E4DFC645B61EB8C73D5469F644
+:10238000E6A3C7B3163D06863D3D74E1CF968B9319
+:10239000CA52C63F79ECAD695C117B7B71F8E324CE
+:1023A000FA41E2FB79F0C7817CFC9F0F7F8C77CDEF
+:1023B000E28F31E2534BADC01FCF76C179E39BCBA7
+:1023C000C615B1D34CB7CBC5150F769D1F577CA74B
+:1023D0004BD84D459B66FB11BA4C5CE1B613881F88
+:1023E000FE95E96308BF6BFFDE842F50E6F82FB43B
+:1023F000338FD338C20D7479EC58B03529B11EC46F
+:102400009FA4E7A3E61296A32BA50F88137FD09570
+:10241000D3BF905E5CF4B8C98D9C07B4EB997F0C78
+:1024200084EA283FB2D32FDA2F15848E513BD62F62
+:10243000F2D07F0C2C4E53DE6CCC0B5C3F18940A10
+:102440008C63223FBA9C7F5F037D37527BA6CBAE65
+:10245000CBFF9DA35E1AD6B63DFE6669BEFD88FB26
+:10246000BD948AFF90EF8157689C3FB7E84169208F
+:10247000F6CFD5058CFF00614B538EDD4F75AC1345
+:102480007172A59FEB79322867281F3F4C6BF1FED4
+:102490007AB98E19B0FC212849FDE3BC5F9107B5DC
+:1024A0007FF7B76FF5FA627109793B8FB7E57F5F08
+:1024B00070D4AFD53AF4DDF1BB6E772BAF38A5B54C
+:1024C000E17EC77485EBAE078D4880EB2615227B35
+:1024D000EE5FE489A7F3E8E9B5DDB3F722785F6141
+:1024E0006B5FBE0E11AFCDB7DEFE7EE73DAB82DA8D
+:1024F000B849FEC45FD91727BAF9174524CAABCE2D
+:10250000D2BB5BB2EE69189916A4F7B0A587053562
+:1025100093190FD139BC6D25D1D65F938633344FD3
+:10252000ED24BC41FEA2D2DF9B6FDFD759FB1EF624
+:1025300026E38493862B15AE5F0E57E6F72F25DD35
+:10254000C2FEFA17EDE0F1B048E1FAB37B9CD22D60
+:10255000E4689FDAC7758CA145F7F37DB721FA21AE
+:10256000CD47D1EEFD70E681DDF8FC50FFF6C7DF08
+:10257000F4929C26B8DD77ED7E8DEE711EAAF76889
+:1025800094870BFB337EFA7D6678B5C87396B4E307
+:10259000B8DC7855AE08909D0DADC27972E2D031AD
+:1025A000D002B4EEBE906D1FA7FDC23E0A792AB2DA
+:1025B000C68EAC1275A9917576FE5FF02FFB7E7CFE
+:1025C000BBB82FA7EAC079685197E2D49E4EF7674F
+:1025D000EBC374AE324DD4A30E59F23568E5D9DDA4
+:1025E0007439B4788AFDC9A13553BDE43F429ADFFE
+:1025F000E826B93EEEDCD7DEE66907DE1869386DFD
+:10260000EDDFBD3F21F7CAD36F093B69E1FE90F1D1
+:102610007BC659F63DAEAED5420F8BAD7BF4C5916E
+:10262000B849F3EDBEF6B749AA131D2EB7EF167CD5
+:10263000DE790F03A6191787565B7539F96DBEFF52
+:102640000BB78A7B12F63D6F35A23AF202A5AEFBBC
+:102650005921571FE40DE7BDCFB6F397479F3F952C
+:10266000C3CFCF773BEF835FE8FB3FF6A79F3F8564
+:102670007E6E6CD5F9F5CFE6D3E1FE266E6D39B4EA
+:10268000E5324C47AC9FFFFBB1703C6FBDE5114B91
+:102690004FDCF2EA96D3625F9CFDFEE81AE73CF756
+:1026A000597A7E9F358FBA18CA090F8D86855E8E3E
+:1026B00006A0F7913CE77AAC5BE5F159B977E28285
+:1026C000A2CBC5052B5AADB8A284F56D6C55EB7342
+:1026D0002437EF915EE4D82777DEDCC6054A8FC049
+:1026E000A5CF845589FCBA169C66BC3CEBD72D1C43
+:1026F000E0F6EB7E6FB297F4CF5FA9DA7689ED470B
+:102700006577E01BC920FB0329D70F1ECADCC9F37C
+:10271000865D797388387F87B2B71B984E61DDB2CA
+:102720002FDD8AB887356A42EE3D9A31CFDB336FB1
+:10273000E8E2DF1FD838A292DE1F9CE2DFC7C03D6F
+:1027400090BBFEDE964DFC7B880BF1DDDE17DDCB0A
+:10275000CAD59B4BD58B976DBD084080F4E21CDC3D
+:10276000CB757418ED76F821AE282C601320FEF09E
+:10277000984AA365C7A4ACBE409755DF4E883A3D42
+:102780005198BE33ACCFCAE99604C5D790E1DF1D9E
+:10279000DAF6E51CFC92D74D3E2D49B3B8E96A0C38
+:1027A000DFE9F78C4B690B9A875AF7FE9780C1CF08
+:1027B000AB20CEEDB5D0C76D0D8C727B1D4C725B1E
+:1027C0000B53DCD6C1596E57802ED3222BC1948176
+:1027D000AF5E26B87F2324B96D86C4FB742774B01E
+:1027E0006CDB0AB257EFBBE864D3398FBE332EB42B
+:1027F000E961D3FD2132D20D17E66B2A2CEC6F5B19
+:10280000D314E3D7A2A01DFF0A39B7E7990FC7BABF
+:1028100071979F70D7CAB9727021DC65E3C4FF035A
+:1028200008E97101B048000000000000000000004D
+:102830000000001800000000000000000000004040
+:102840000000000000000000000000280000000060
+:102850000000000000000010000000000000000068
+:102860000000002000000000000000000000001038
+:102870000000000000000000000000080000000050
+:102880000000000000000000000000000000000048
+:102890000000000000000000000000000000000038
+:1028A0000000000000000000000000000000000028
+:1028B0000000000000000000000000000000000018
+:1028C0000000000000000000000000000000000008
+:1028D00000000000000000000000000000000000F8
+:1028E00000000000000000000000000000000000E8
+:1028F00000000000000000000000000000000000D8
+:1029000000000000000000000000000000000000C7
+:1029100000000000000000000000000000000000B7
+:1029200000000000000000000000000000000000A7
+:102930000000000000000000000000000000000097
+:102940000000000000000000000000000000000087
+:102950000000000000000000000000000000000077
+:102960000000000000000000000000000000000067
+:102970000000000000000000000000000000000057
+:102980000000000000000000000000000000000047
+:102990000000000000000000000090000010000097
+:1029A0000000000800009008001000000000000275
+:1029B00000009000001000000000001000009DA822
+:1029C000000000000000000880000000000000007F
+:1029D0000000000080000000000000000000000077
+:1029E000800000000000000000000000000091A036
+:1029F0000000000000000008000093C00001000477
+:102A000000000001000093C8000000000000000268
+:102A1000000093D00000000000000008000093D4E4
+:102A20000000000000000002000094980000000078
+:102A300000000008000093D8000800000000000813
+:102A400000009B3800400000000000400000941887
+:102A50000008000000000008000094580008000072
+:102A600000000008000094A800C8000000000098C2
+:102A700000009638009800000000002800009678BA
+:102A800000980000000000280000C0000540003051
+:102A9000000005400000CB200008000000000001FD
+:102AA0000000CB2100080000000000010000200809
+:102AB00000100000000000100000200000000000D6
+:102AC0000000000800009D600008000000000002F7
+:102AD00000009DA0000000000000000100000000B8
+:102AE00000000000000000000000000000000000E6
+:102AF00000000000000000000000000000000000D6
+:102B000080000000000000000000000080000000C5
+:102B10000000000000000000800000000000000035
+:102B20000000000080000000000000000000000025
+:102B30008000000000000000000000008000000095
+:102B40000000000000000000800000000000000005
+:102B500000000000800000000000000000000000F5
+:102B60008000000000000000000000008000000065
+:102B700000000000000000008000000000000000D5
+:102B800000000000800000000000000000000000C5
+:102B900080000000000000000000000000000000B5
+:102BA0000000000000000000000000000000000025
+:102BB0000000000000000000000000000000000015
+:102BC0000000000000000000000000000000000005
+:102BD0000000000000000000800000000000000075
+:102BE0000000000080000000000000000000000065
+:102BF0008000000000000000000000000000000055
+:102C00000000000000000000800000000000000044
+:102C10000000000080000000000000000000000034
+:102C20008000000000000000000000000000000024
+:102C30000000000000000000000000000000000094
+:102C40000000000000000000000000000000000084
+:102C50000000000000000000000000000000000074
+:102C60000000000000000000000000000000000064
+:102C700000000000000012C800800000000000807A
+:102C80000000000100000000000000000000A000A3
+:102C9000071000000000071000001EC80000000020
+:102CA000000000080000AEC000080000000000089E
+:102CB0000000AE4000080000000000080000AE80E8
+:102CC00000080000000000080000200800100000BC
+:102CD00000000010000020000000000000000008BC
+:102CE0000000A01007100040000000400000AF40AE
+:102CF00000080000000000010000AF4100080000D3
+:102D00000000000100001ED00000000000000001D3
+:102D100000001ED8000000000000000200001EDAC3
+:102D20000000000000000002000012B000080000D7
+:102D3000000000088000000000000000000000000B
+:102D40008000000000000000000000008000000083
+:102D500000000000000000008000000000000000F3
+:102D600000000000800000000000000000000000E3
+:102D70008000000000000000000000008000000053
+:102D800000000000000000008000000000000000C3
+:102D900000000000800000000000000000000000B3
+:102DA0000000000000000000000000000000000023
+:102DB0000000000000000000000000000000000013
+:102DC0000000000000000000000000000000000003
+:102DD0000000000000000000000000008000000073
+:102DE0000000000000000000800000000000000063
+:102DF00000000000000000000000000000000000D3
+:102E000080000000000000000000000080000000C2
+:102E10000000000000000000800000000000000032
+:102E20000000000080000000000000000000000022
+:102E30000000B00000180000000000180000B300FF
+:102E400000400000000000400000B300004000020D
+:102E5000000000010000B30100400002000000007B
+:102E600000008000004000000000004080000000E2
+:102E7000000000000000000000008000000800408A
+:102E8000000000040000800400080040000000046E
+:102E90000000BB0000280000000000280000BC402B
+:102EA00000100000000000100000880000800000FA
+:102EB0000000008000008800000800800000000280
+:102EC00000008C000020000000000020000020080E
+:102ED00000100000000000100000200000000000B2
+:102EE00000000008000011080008000000000008B1
+:102EF000000011680008000000000008000011A890
+:102F00000008000000000008000012700008000027
+:102F10000000000100001271000800000000000124
+:102F200000008D00001000040000000400001320C9
+:102F300000300018000000100000132800300018B6
+:102F400000000002800000000000000000000000FF
+:102F5000800000000000000000000000000011E8F8
+:102F600000000000000000018000000000000000E0
+:102F700000000000800000000000000000000000D1
+:102F80008000000000000000000000008000000041
+:102F900000000000000000008000000000000000B1
+:102FA00000000000800000000000000000000000A1
+:102FB0000000000000000000000000000000000011
+:102FC0000000000000000000000000000000000001
+:102FD00000000000000000000000000000000000F1
+:102FE00080000000000000000000000080000000E1
+:102FF00000000000000000000000000000000000D1
+:103000000000000000008308008000000000008035
+:103010000000000100000000000000000000200887
+:103020000010000000000010000020000000000060
+:103030000000000800008D100008000000000008DB
+:1030400000008D700008000000000008000084509F
+:10305000046000280000046000008EA0000800004A
+:103060000000000100008EA1000800000000000127
+:1030700000008408000800000000000800008448E8
+:10308000000000000000000100008DF400080000B6
+:103090000000000200008DF60008000000000002A1
+:1030A00000008E04001000000000000480000000FA
+:1030B0000000000000000000800000000000000090
+:1030C0000000000080000000000000000000000080
+:1030D00000000000000000000000000000000000F0
+:1030E00000000000000000000000000000000000E0
+:1030F00000000000000000000000000000000000D0
+:1031000080000000000000000000000080000000BF
+:1031100000000000000000000000000000000000AF
+:10312000000000008000000000000000000000001F
+:10313000800000000000000000000000800000008F
+:1031400000000000000000008000000000000000FF
+:1031500000000000000030000040000000000008F7
+:1031600000003008004000000000002800003390FC
+:1031700001C0001000000008000032000020000024
+:1031800000000020000037200000000000000008C0
+:103190000000102006200038000000080000A000F9
+:1031A000000000000000200000003EA90000000018
+:1031B0000000000100003EC8000000000000000206
+:1031C00000001C4000E00008000000088000000033
+:1031D00000000000000000000000400000080000A7
+:1031E0000000000100004001000800000000000194
+:1031F00000004040000800040000000200004060A1
+:103200000008000400000004000040000008000066
+:10321000000000040000400400080000000000045A
+:10322000000040400000000000000008000040488E
+:103230000000000000000008000080000000000006
+:1032400000000010000050400001000400000001D8
+:1032500000005000000000000000002000005008A6
+:1032600000100000000000040000500C00100000DE
+:1032700000000001000052C7000000000000000133
+:10328000000052C6000000000000000100003000F5
+:103290000030001800000004000030040030001866
+:1032A0000000000400003008003000180000000298
+:1032B0000000300A00300018000000020000300C4E
+:1032C00000300018000000010000300D0030001830
+:1032D000000000010000300E003000180000000166
+:1032E000000030100030001800000004000030140E
+:1032F00000300018000000040000500001000080B1
+:1033000000080004000050040100008000080004D0
+:103310000000000A000000000000000000005068EB
+:1033200001000080000000010000506901000080E1
+:10333000000000010000506C01000080000000024D
+:103340000000506E0100008000000002000050707C
+:1033500001000080000000040000507401000080A3
+:103360000000000400005066010000800000000220
+:103370000000506401000080000000010000506067
+:103380000100008000000002000050620100008087
+:103390000000000200005050010000800000000406
+:1033A000000050540100008000000004000050584C
+:1033B00001000080000000040000505C010000805B
+:1033C000000000040000507C0100008000000001AB
+:1033D0000000507D01000080000000010000401846
+:1033E00000100000000000040000409000100000E9
+:1033F00000000004000040980010000000000004DD
+:103400000000411000000000000000020000411216
+:103410000000000000000002000041140000000055
+:103420000000000200004116000000000000000241
+:103430000000604000080000000000020000604240
+:1034400000080000000000020000604400080000C6
+:103450000000000400006080000800000000000878
+:10346000000060C00040000800000008000060008C
+:1034700000080000000000020000600200080000D8
+:1034800000000001000060040008000000000002CD
+:103490000000634000080000000000080000638096
+:1034A0000008000000000004000063840008000021
+:1034B00000000001000063C00008000000000002DE
+:1034C000000063C400080000000000020000640067
+:1034D0000008000000000004000070000010000060
+:1034E0000000000400007004001000000000000450
+:1034F00000007008001000000000000400007000D0
+:103500000008000000000002000070020008000037
+:10351000000000010000700400080000000000022C
+:10352000000070400008000000000002000070442D
+:1035300000080000000000020000704600080000C3
+:1035400000000002000076480008000000000008AB
+:10355000000070800008000000000002000070847D
+:10356000000800000000000200007688000800004B
+:10357000000000080000804000080000000000017A
+:1035800000008041000800000000000100008042AF
+:103590000008000000000001000080430008000057
+:1035A0000000000100008000000800000000000290
+:1035B00000008002000800000000000100008004FC
+:1035C0000008000000000002000080C000080000A9
+:1035D00000000002000080C200080000000000029D
+:1035E000000080C40008000000000002000080808D
+:1035F00000080000000000010000808100080000B9
+:1036000000000001000080820008000000000001AE
+:10361000000080830008000000000001000080849A
+:103620000008000000000001000080850008000084
+:10363000000000010000808600080000000000017A
+:1036400000006000000800000000000200006002AE
+:1036500000080000000000010000600400080000F5
+:10366000000000020000604200C0001800000002DC
+:103670000000604000C00018000000020000604C24
+:1036800000C00018000000080000604400C00018DE
+:10369000000000080000605700C000180000000192
+:1036A0000000605400C000180000000200006056D6
+:1036B00000C0001800000001000066400008000083
+:1036C00000000008000066800008000000000008FC
+:1036D000000066C000080000000000080000D94299
+:1036E00000180000000000020000DE4000000000A2
+:1036F000000000000000E0000000000000000004E6
+:103700000000DD4000000000000000040000DD4477
+:1037100000000000000000040000DD480000000080
+:10372000000000040000DD4C000000000000000468
+:103730000000DD5000000000000000040000DD5427
+:1037400000000000000000040000DD580000000040
+:10375000000000040000DD40000000000000002028
+:103760000000DA0000000000000000040000DA00A1
+:1037700000000000000000680000BB6000000000C6
+:10378000000000000000D000000000000000000465
+:103790000000B0C000000000000000040000B0C441
+:1037A00000000000000000040000B0C8000000009D
+:1037B000000000040000B0C0000000000000001085
+:1037C0000000D6B000000000000000040000D6B4E5
+:1037D00000000000000000040000D6B80000000057
+:1037E000000000040000D6BC00000000000000043F
+:1037F0000000D6B000000000000000100000D34818
+:1038000000000000000000080000D3580000000085
+:103810000000008000000010000000000000000018
+:103820000000D35800000000000000080000000065
+:0838300006020900000000007F
+:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex
deleted file mode 100644
index aef9aa62242..00000000000
--- a/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex
+++ /dev/null
@@ -1,15456 +0,0 @@
-:1000000000005310000000680000070C000053803F
-:100010000000318000005A90000000B000008C18F1
-:100020000000C13400008CD0000000D800014E0850
-:100030000000F1F000014EE800000074000240E012
-:100040000000525C00024158000000B8000293B862
-:100050000001213C0002947800000FFC0003B5B8B9
-:10006000000000040003C5B8020400480000000FAF
-:1000700002040054000000450204005C0000000679
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040258000000360204025C000000365F
-:10017000020402600810000002040264081000007B
-:1001800002040004000000FF02040008000000FF59
-:100190000204000C000000FF02040010000000FF39
-:1001A000020400140000007F02040018000000FF99
-:1001B0000204001C000000FF02040020000000FFF9
-:1001C000020400240000003E020400280000000099
-:1001D0000204002C0000003F020400300000003F39
-:1001E000020400340000003F020400380000003F19
-:1001F0000204003C0000003F020400400000003FF9
-:10020000020400440000003F020404CC000000018E
-:1002100002042008000002110204200C0000020069
-:10022000020420100000020402042014000002193D
-:100230000204201C0000FFFF020420200000FFFF3A
-:10024000020420240000FFFF020420280000FFFF1A
-:1002500002042038000000200604203C0000000FAB
-:1002600002042078000000210604207C0000000F1A
-:10027000020420B800000001060420BC0000000FAA
-:10028000020420F800000001060420FC0000003FEA
-:10029000020421F800000001060421FC0000000F08
-:1002A0000204223807FFFFFF0204223C0000007F07
-:1002B0000204224007FFFFFF020422440000003F27
-:1002C00001042248000000000104224C000000004C
-:1002D000010422500000000001042254000000002C
-:1002E00001042258000000000104225C000000000C
-:1002F00001042260000000000104226400000000EC
-:1003000001042268000000000104226C00000000CB
-:1003100001042270000000000104227400000000AB
-:1003200001042278000000000104227C000000008B
-:10033000020422C00000FFFF020422C40000FFFFED
-:10034000020422C80000FFFF020422CC0000FFFFCD
-:100350000C042000000003E80A0420000000000153
-:100360000B042000000000030605400000000D0003
-:100370000205004400000020020500480000003291
-:1003800002050090021500200205009402150020CD
-:1003900002050098000000300205009C08100000D3
-:1003A000020500A000000036020500A40000003095
-:1003B000020500A800000031020500B000000004A2
-:1003C000020500B400000005020500C000000000A6
-:1003D000020500C400000004020500D40000000172
-:1003E00002050114000000010205011C00000001CB
-:1003F00002050120000000020205020400000001C5
-:100400000205020C0000004002050210000000403E
-:100410000205021C00000020020502200000001C52
-:100420000205022400000020060502400000000A28
-:1004300004050280002000000205005000000007B3
-:1004400002050054000000070205005800000000EB
-:100450000205005C000000080205006000000001C9
-:100460000605006400000003020500D80000000635
-:100470000205000400000001020500080000000160
-:100480000205000C00000001020500100000000140
-:100490000205001400000001020500180000000120
-:1004A0000205001C00000001020500200000000100
-:1004B00002050024000000010205002800000001E0
-:1004C0000205002C000000010205003000000001C0
-:1004D00002050034000000010205003800000001A0
-:1004E0000205003C00000001020500400000000180
-:1004F000020500E00000000D020500E80000000019
-:10050000020500F000000000020500F800000000F5
-:10051000020500E40000002D020500EC00000020B0
-:10052000020500F400000020020500FC000000208D
-:10053000020500E00000001D020500E800000010B8
-:10054000020500F000000010020500F80000001095
-:10055000020500E40000003D020500EC0000003050
-:10056000020500F400000030020500FC000000302D
-:10057000020500E00000004D020500E80000004018
-:10058000020500F000000040020500F800000040F5
-:10059000020500E40000006D020500EC00000060B0
-:1005A000020500F400000060020500FC000000608D
-:1005B000020500E00000005D020500E800000050B8
-:1005C000020500F000000050020500F80000005095
-:1005D000020500E40000007D020500EC0000007050
-:1005E000020500F400000070020500FC000000702D
-:1005F0000406100002000020020600DC00000001DA
-:100600000406020000030220020600DC00000000D5
-:100610000718040000AD0000081807D800050223E1
-:10062000071C000029920000071C8000312A0A657F
-:10063000071D000034A316B0071D80002E7A23D9B1
-:10064000071E000003502F78081E07F03F02022506
-:10065000021800BC0000003001180000000000007B
-:10066000011800040000000001180008000000004C
-:100670000118000C0000000001180010000000002C
-:100680000118001400000000021800200000000102
-:1006900002180024000000020218002800000003D5
-:1006A0000218002C000000000218003000000004B6
-:1006B0000218003400000001021800380000000099
-:1006C0000218003C00000001021800400000000475
-:1006D0000218004400000000021800480000000159
-:1006E0000218004C00000003021800500000000037
-:1006F0000218005400000001021800580000000415
-:100700000218005C000000000218006000000001F8
-:1007100002180064000000030218006800000000D6
-:100720000218006C000000010218007000000004B4
-:100730000218007400000000021800780000000495
-:100740000218007C00000003061800800000000270
-:10075000021800A400007FFF021800A8000003FF99
-:1007600002180224000000000218023400000000F9
-:100770000218024C00000000021802E4000000FF12
-:100780000618100000000400021B8BC000000001CE
-:10079000021B800000000034021B80400000001893
-:1007A000021B80800000000C021B80C000000020A3
-:1007B0000C1B8300000864700A1B830000000157B3
-:1007C0000B1B83000000055F0A1B83400000000034
-:1007D0000C1B8340000002260B1B8340000000011D
-:1007E000021B838000086470021B83C00000022685
-:1007F000021B1480000000010A1B1480000000008E
-:10080000021B944000000001061B944800000002F7
-:10081000061A1000000002B3041A1ACC00010227C5
-:10082000061A1AD000000008061A2008000000C8A6
-:10083000061A200000000002041A1BF8009002288B
-:10084000061A371800000004061A371000000002CC
-:10085000061A500000000002061A500800000004AA
-:10086000061A501800000004061A50280000000460
-:10087000061A503800000004061A50480000000410
-:10088000061A505800000004061A506800000004C0
-:10089000061A507800000002041A52C0000202B882
-:1008A000061A405000000006041A4068000202BA0E
-:1008B000041A4040000402BC041A8000000102C077
-:1008C000061A800400000003041A8010000102C10F
-:1008D000061A801400000003041A8020000102C2DE
-:1008E000061A802400000003041A8030000102C3AD
-:1008F000061A803400000003041A8040000102C47C
-:10090000061A804400000003041A8050000102C54A
-:10091000061A805400000003041A8060000102C619
-:10092000061A806400000003041A8070000102C7E8
-:10093000061A807400000003041A8080000102C8B7
-:10094000061A808400000003041A8090000102C986
-:10095000061A809400000003041A80A0000102CA55
-:10096000061A80A400000003041A80B0000102CB24
-:10097000061A80B400000003041A80C0000102CCF3
-:10098000061A80C400000003041A80D0000102CDC2
-:10099000061A80D400000003041A80E0000102CE91
-:1009A000061A80E400000003041A80F0000102CF60
-:1009B000061A80F400000003041A8100000102D02E
-:1009C000061A810400000003041A8110000102D1FC
-:1009D000061A811400000003041A8120000102D2CB
-:1009E000061A812400000003041A8130000102D39A
-:1009F000061A813400000003041A8140000102D469
-:100A0000061A814400000003041A8150000102D537
-:100A1000061A815400000003041A8160000102D606
-:100A2000061A816400000003041A8170000102D7D5
-:100A3000061A817400000003041A8180000102D8A4
-:100A4000061A818400000003041A8190000102D973
-:100A5000061A819400000003041A81A0000102DA42
-:100A6000061A81A400000003041A81B0000102DB11
-:100A7000061A81B400000003041A81C0000102DCE0
-:100A8000061A81C400000003041A81D0000102DDAF
-:100A9000061A81D400000003041A81E0000102DE7E
-:100AA000061A81E400000003041A81F0000102DF4D
-:100AB000061A81F400000003041A8200000102E01B
-:100AC000061A820400000003041A8210000102E1E9
-:100AD000061A821400000003041A8220000102E2B8
-:100AE000061A822400000003041A8230000102E387
-:100AF000061A823400000003041A8240000102E456
-:100B0000061A824400000003041A8250000102E524
-:100B1000061A825400000003041A8260000102E6F3
-:100B2000061A826400000003041A8270000102E7C2
-:100B3000061A827400000003041A8280000102E891
-:100B4000061A828400000003041A8290000102E960
-:100B5000061A829400000003041A82A0000102EA2F
-:100B6000061A82A400000003041A82B0000102EBFE
-:100B7000061A82B400000003041A82C0000102ECCD
-:100B8000061A82C400000003041A82D0000102ED9C
-:100B9000061A82D400000003041A82E0000102EE6B
-:100BA000061A82E400000003041A82F0000102EF3A
-:100BB000061A82F400000003041A8300000102F008
-:100BC000061A830400000003041A8310000102F1D6
-:100BD000061A831400000003041A8320000102F2A5
-:100BE000061A832400000003041A8330000102F374
-:100BF000061A833400000003041A8340000102F443
-:100C0000061A834400000003041A8350000102F511
-:100C1000061A835400000003041A8360000102F6E0
-:100C2000061A836400000003041A8370000102F7AF
-:100C3000061A837400000003041A8380000102F87E
-:100C4000061A838400000003041A8390000102F94D
-:100C5000061A839400000003041A83A0000102FA1C
-:100C6000061A83A400000003041A83B0000102FBEB
-:100C7000061A83B400000003041A83C0000102FCBA
-:100C8000061A83C400000003041A83D0000102FD89
-:100C9000061A83D400000003041A83E0000102FE58
-:100CA000061A83E400000003041A83F0000102FF27
-:100CB000061A83F400000003041A840000010300F4
-:100CC000061A840400000003041A841000010301C2
-:100CD000061A841400000003041A84200001030291
-:100CE000061A842400000003041A84300001030360
-:100CF000061A843400000003041A8440000103042F
-:100D0000061A844400000003041A845000010305FD
-:100D1000061A845400000003041A846000010306CC
-:100D2000061A846400000003041A8470000103079B
-:100D3000061A847400000003041A8480000103086A
-:100D4000061A848400000003041A84900001030939
-:100D5000061A849400000003041A84A00001030A08
-:100D6000061A84A400000003041A84B00001030BD7
-:100D7000061A84B400000003041A84C00001030CA6
-:100D8000061A84C400000003041A84D00001030D75
-:100D9000061A84D400000003041A84E00001030E44
-:100DA000061A84E400000003041A84F00001030F13
-:100DB000061A84F400000003041A850000010310E1
-:100DC000061A850400000003041A851000010311AF
-:100DD000061A851400000003041A8520000103127E
-:100DE000061A852400000003041A8530000103134D
-:100DF000061A853400000003041A8540000103141C
-:100E0000061A854400000003041A855000010315EA
-:100E1000061A855400000003041A856000010316B9
-:100E2000061A856400000003041A85700001031788
-:100E3000061A857400000003041A85800001031857
-:100E4000061A858400000003041A85900001031926
-:100E5000061A859400000003041A85A00001031AF5
-:100E6000061A85A400000003041A85B00001031BC4
-:100E7000061A85B400000003041A85C00001031C93
-:100E8000061A85C400000003041A85D00001031D62
-:100E9000061A85D400000003041A85E00001031E31
-:100EA000061A85E400000003041A85F00001031F00
-:100EB000061A85F400000003041A860000010320CE
-:100EC000061A860400000003041A8610000103219C
-:100ED000061A861400000003041A8620000103226B
-:100EE000061A862400000003041A8630000103233A
-:100EF000061A863400000003041A86400001032409
-:100F0000061A864400000003041A865000010325D7
-:100F1000061A865400000003041A866000010326A6
-:100F2000061A866400000003041A86700001032775
-:100F3000061A867400000003041A86800001032844
-:100F4000061A868400000003041A86900001032913
-:100F5000061A869400000003041A86A00001032AE2
-:100F6000061A86A400000003041A86B00001032BB1
-:100F7000061A86B400000003041A86C00001032C80
-:100F8000061A86C400000003041A86D00001032D4F
-:100F9000061A86D400000003041A86E00001032E1E
-:100FA000061A86E400000003041A86F00001032FED
-:100FB000061A86F400000003041A870000010330BB
-:100FC000061A870400000003041A87100001033189
-:100FD000061A871400000003041A87200001033258
-:100FE000061A872400000003041A87300001033327
-:100FF000061A873400000003041A874000010334F6
-:10100000061A874400000003041A875000010335C4
-:10101000061A875400000003041A87600001033693
-:10102000061A876400000003041A87700001033762
-:10103000061A877400000003041A87800001033831
-:10104000061A878400000003041A87900001033900
-:10105000061A879400000003041A87A00001033ACF
-:10106000061A87A400000003041A87B00001033B9E
-:10107000061A87B400000003041A87C00001033C6D
-:10108000061A87C400000003041A87D00001033D3C
-:10109000061A87D400000003041A87E00001033E0B
-:1010A000061A87E400000003041A87F00001033FDA
-:1010B000061A87F400000003041A880000010340A8
-:1010C000061A880400000003041A88100001034176
-:1010D000061A881400000003041A88200001034245
-:1010E000061A882400000003041A88300001034314
-:1010F000061A883400000003041A884000010344E3
-:10110000061A884400000003041A885000010345B1
-:10111000061A885400000003041A88600001034680
-:10112000061A886400000003041A8870000103474F
-:10113000061A887400000003041A8880000103481E
-:10114000061A888400000003041A889000010349ED
-:10115000061A889400000003041A88A00001034ABC
-:10116000061A88A400000003041A88B00001034B8B
-:10117000061A88B400000003041A88C00001034C5A
-:10118000061A88C400000003041A88D00001034D29
-:10119000061A88D400000003041A88E00001034EF8
-:1011A000061A88E400000003041A88F00001034FC7
-:1011B000061A88F400000003041A89000001035095
-:1011C000061A890400000003041A89100001035163
-:1011D000061A891400000003041A89200001035232
-:1011E000061A892400000003041A89300001035301
-:1011F000061A893400000003041A894000010354D0
-:10120000061A894400000003041A8950000103559E
-:10121000061A895400000003041A8960000103566D
-:10122000061A896400000003041A8970000103573C
-:10123000061A897400000003041A8980000103580B
-:10124000061A898400000003041A899000010359DA
-:10125000061A899400000003041A89A00001035AA9
-:10126000061A89A400000003041A89B00001035B78
-:10127000061A89B400000003041A89C00001035C47
-:10128000061A89C400000003041A89D00001035D16
-:10129000061A89D400000003041A89E00001035EE5
-:1012A000061A89E400000003041A89F00001035FB4
-:1012B000061A89F400000003041A8A000001036082
-:1012C000061A8A0400000003041A8A100001036150
-:1012D000061A8A1400000003041A8A20000103621F
-:1012E000061A8A2400000003041A8A3000010363EE
-:1012F000061A8A3400000003041A8A4000010364BD
-:10130000061A8A4400000003041A8A50000103658B
-:10131000061A8A5400000003041A8A60000103665A
-:10132000061A8A6400000003041A8A700001036729
-:10133000061A8A7400000003041A8A8000010368F8
-:10134000061A8A8400000003041A8A9000010369C7
-:10135000061A8A9400000003041A8AA00001036A96
-:10136000061A8AA400000003041A8AB00001036B65
-:10137000061A8AB400000003041A8AC00001036C34
-:10138000061A8AC400000003041A8AD00001036D03
-:10139000061A8AD400000003041A8AE00001036ED2
-:1013A000061A8AE400000003041A8AF00001036FA1
-:1013B000061A8AF400000003041A8B00000103706F
-:1013C000061A8B0400000003041A8B10000103713D
-:1013D000061A8B1400000003041A8B20000103720C
-:1013E000061A8B2400000003041A8B3000010373DB
-:1013F000061A8B3400000003041A8B4000010374AA
-:10140000061A8B4400000003041A8B500001037578
-:10141000061A8B5400000003041A8B600001037647
-:10142000061A8B6400000003041A8B700001037716
-:10143000061A8B7400000003041A8B8000010378E5
-:10144000061A8B8400000003041A8B9000010379B4
-:10145000061A8B9400000003041A8BA00001037A83
-:10146000061A8BA400000003041A8BB00001037B52
-:10147000061A8BB400000003041A8BC00001037C21
-:10148000061A8BC400000003041A8BD00001037DF0
-:10149000061A8BD400000003041A8BE00001037EBF
-:1014A000061A8BE400000003041A8BF00001037F8E
-:1014B000061A8BF400000003041A8C00000103805C
-:1014C000061A8C0400000003041A8C10000103812A
-:1014D000061A8C1400000003041A8C2000010382F9
-:1014E000061A8C2400000003041A8C3000010383C8
-:1014F000061A8C3400000003041A8C400001038497
-:10150000061A8C4400000003041A8C500001038565
-:10151000061A8C5400000003041A8C600001038634
-:10152000061A8C6400000003041A8C700001038703
-:10153000061A8C7400000003041A8C8000010388D2
-:10154000061A8C8400000003041A8C9000010389A1
-:10155000061A8C9400000003041A8CA00001038A70
-:10156000061A8CA400000003041A8CB00001038B3F
-:10157000061A8CB400000003041A8CC00001038C0E
-:10158000061A8CC400000003041A8CD00001038DDD
-:10159000061A8CD400000003041A8CE00001038EAC
-:1015A000061A8CE400000003041A8CF00001038F7B
-:1015B000061A8CF400000003041A8D000001039049
-:1015C000061A8D0400000003041A8D100001039117
-:1015D000061A8D1400000003041A8D2000010392E6
-:1015E000061A8D2400000003041A8D3000010393B5
-:1015F000061A8D3400000003041A8D400001039484
-:10160000061A8D4400000003041A8D500001039552
-:10161000061A8D5400000003041A8D600001039621
-:10162000061A8D6400000003041A8D7000010397F0
-:10163000061A8D7400000003041A8D8000010398BF
-:10164000061A8D8400000003041A8D90000103998E
-:10165000061A8D9400000003041A8DA00001039A5D
-:10166000061A8DA400000003041A8DB00001039B2C
-:10167000061A8DB400000003041A8DC00001039CFB
-:10168000061A8DC400000003041A8DD00001039DCA
-:10169000061A8DD400000003041A8DE00001039E99
-:1016A000061A8DE400000003041A8DF00001039F68
-:1016B000061A8DF400000003041A8E00000103A036
-:1016C000061A8E0400000003041A8E10000103A104
-:1016D000061A8E1400000003041A8E20000103A2D3
-:1016E000061A8E2400000003041A8E30000103A3A2
-:1016F000061A8E3400000003041A8E40000103A471
-:10170000061A8E4400000003041A8E50000103A53F
-:10171000061A8E5400000003041A8E60000103A60E
-:10172000061A8E6400000003041A8E70000103A7DD
-:10173000061A8E7400000003041A8E80000103A8AC
-:10174000061A8E8400000003041A8E90000103A97B
-:10175000061A8E9400000003041A8EA0000103AA4A
-:10176000061A8EA400000003041A8EB0000103AB19
-:10177000061A8EB400000003041A8EC0000103ACE8
-:10178000061A8EC400000003041A8ED0000103ADB7
-:10179000061A8ED400000003041A8EE0000103AE86
-:1017A000061A8EE400000003041A8EF0000103AF55
-:1017B000061A8EF400000003041A8F00000103B023
-:1017C000061A8F0400000003041A8F10000103B1F1
-:1017D000061A8F1400000003041A8F20000103B2C0
-:1017E000061A8F2400000003041A8F30000103B38F
-:1017F000061A8F3400000003041A8F40000103B45E
-:10180000061A8F4400000003041A8F50000103B52C
-:10181000061A8F5400000003041A8F60000103B6FB
-:10182000061A8F6400000003041A8F70000103B7CA
-:10183000061A8F7400000003041A8F80000103B899
-:10184000061A8F8400000003041A8F90000103B968
-:10185000061A8F9400000003041A8FA0000103BA37
-:10186000061A8FA400000003041A8FB0000103BB06
-:10187000061A8FB400000003041A8FC0000103BCD5
-:10188000061A8FC400000003041A8FD0000103BDA4
-:10189000061A8FD400000003041A8FE0000103BE73
-:1018A000061A8FE400000007041A62C0002003BF7C
-:1018B000061A1AF000000042061AAF0000000008E5
-:1018C000061AE00000000540061AD0000000007271
-:1018D000061AD24800000010061AD6B000000020F8
-:1018E000061AD47000000090061AD46800000002A6
-:1018F000061AA000000001C4061A30000000001003
-:10190000061A308000000010061A31000000001096
-:10191000061A318000000010061A33000000001281
-:10192000061A339000000070061AD4580000000216
-:10193000061AD34800000002061AD35800000020FF
-:10194000061AA710000001C4061A3040000000105B
-:10195000061A30C000000010061A314000000010C6
-:10196000061A31C000000010061A334800000012A9
-:10197000061A355000000070061AD46000000002FC
-:10198000061AD35000000002061AD3D80000002027
-:10199000021AAE2000000000061A500000000002EB
-:1019A000061A508000000012041A4000000203DFF3
-:1019B000041A63C0000203E1061A7000000000046C
-:1019C000061A320000000008021AAE2400000000CF
-:1019D000061A501000000002061A50C8000000123B
-:1019E000041A4008000203E3041A63C8000203E576
-:1019F000061A701000000004061A322000000008C9
-:101A0000021AAE2800000000061A50200000000252
-:101A1000061A511000000012041A4010000203E7D9
-:101A2000041A63D0000203E9061A702000000004C3
-:101A3000061A324000000008021AAE2C0000000016
-:101A4000061A503000000002061A51580000001219
-:101A5000041A4018000203EB041A63D8000203EDD5
-:101A6000061A703000000004061A326000000008F8
-:101A7000021AAE3000000000061A504000000002BA
-:101A8000061A51A000000012041A4020000203EFC1
-:101A9000041A63E0000203F1061A7040000000041B
-:101AA000061A328000000008021AAE34000000005E
-:101AB000061A505000000002061A51E800000012F9
-:101AC000041A4028000203F3041A63E8000203F535
-:101AD000061A705000000004061A32A00000000828
-:101AE000021AAE3800000000061A50600000000222
-:101AF000061A523000000012041A4030000203F7A8
-:101B0000041A63F0000203F9061A70600000000472
-:101B1000061A32C000000008021AAE3C00000000A5
-:101B2000061A507000000002061A527800000012D7
-:101B3000041A4038000203FB041A63F8000203FD94
-:101B4000061A707000000004061A32E00000000857
-:101B50000200A2A4000002090200A270000000001E
-:101B60000200A274000000000200A2700000000049
-:101B70000200A274000000000200A2700000000039
-:101B80000200A274000000000200A2700000000029
-:101B90000200A27400000000020100B40000000175
-:101BA000020100B800000001020100CC00000001A9
-:101BB000020100D000000001020100DC0000000171
-:101BC0000201010000000001020101040000000107
-:101BD0000201007C003000000201008400000028A7
-:101BE0000201008C0000000002010130000000042E
-:101BF0000201025C00000001020103280000000055
-:101C0000020160580000FFFF020160700000000741
-:101C10000201055400000030020100C40000000170
-:101C2000020100F800000001020100F000000001C4
-:101C3000020100800030000002010088000000283E
-:101C400002010090000000000201013400000004C5
-:101C5000020102DC000000010201032C0000000070
-:101C60000201605C0000FFFF0201607400000007D9
-:101C70000201056400000030020100C800000001FC
-:101C8000020100FC00000001020100F4000000015C
-:101C9000020C100000000028020C200800000211B5
-:101CA000020C200C00000200020C201000000204B4
-:101CB000020C201C0000FFFF020C20200000FFFF90
-:101CC000020C20240000FFFF020C20280000FFFF70
-:101CD000020C203800000000020C203C00000037FD
-:101CE000020C204000000021020C204400000020D3
-:101CF000060C20480000001D020C20BC0000000162
-:101D0000060C20C00000003F020C21BC00000001B6
-:101D1000020C21C000000001020C21C400000001DF
-:101D2000060C21C80000001C020C223807FFFFFF30
-:101D3000020C223C0000007F020C224007FFFFFF44
-:101D4000020C22440000003F010C22480000000069
-:101D5000010C224C00000000010C22500000000089
-:101D6000010C225400000000010C22580000000069
-:101D7000010C225C00000000010C22600000000049
-:101D8000010C226400000000010C22680000000029
-:101D9000010C226C00000000010C22700000000009
-:101DA000010C227400000000010C227800000000E9
-:101DB000010C227C00000000020C22D80000FFFF72
-:101DC000020C22DC0000FFFF020C22E00000FFFFFB
-:101DD000020C22E40000FFFF0C0C2000000003E8CE
-:101DE0000A0C2000000000010B0C20000000000382
-:101DF000020C400800001011020C400C0000100002
-:101E0000020C401000001004020C401400001021CD
-:101E1000020C401C0000FFFF020C40200000FFFFEE
-:101E2000020C40240000FFFF020C40280000FFFFCE
-:101E3000020C403800000046020C403C0000000C40
-:101E4000060C404000000002020C40480000001850
-:101E5000020C404C000000F0060C40500000001F37
-:101E6000020C40CC00000001060C40D00000003AFB
-:101E7000020C41B800000001060C41BC0000000348
-:101E8000020C41C800000001020C41CC000000011E
-:101E9000060C41D00000001A020C423807FFFFFF79
-:101EA000020C423C0000007F020C424007FFFFFF93
-:101EB000020C42440000003F010C424800000000B8
-:101EC000010C424C00000000010C425000000000D8
-:101ED000010C425400000000010C425800000000B8
-:101EE000010C425C00000000010C42600000000098
-:101EF000010C426400000000010C42680000000078
-:101F0000010C426C00000000010C42700000000057
-:101F1000010C427400000000010C42780000000037
-:101F2000010C427C00000000010C42800000000017
-:101F3000020C42D80000FFFF020C42DC0000FFFF51
-:101F4000020C42E00000FFFF020C42E40000FFFF31
-:101F50000C0C4000000003E80A0C400000000001E7
-:101F60000B0C400000000003060D400000000A00BA
-:101F7000020D004400000032020D008C021500200A
-:101F8000020D009002150020020D009408100000C0
-:101F9000020D009800000036020D00A000000000B5
-:101FA000020D00A400000004020D00A800000004BF
-:101FB000060D00AC00000002020D00B80000000297
-:101FC000020D00C000000001020D00C80000000268
-:101FD000020D00CC00000002020D015C00000001B7
-:101FE000020D016400000001020D01680000000202
-:101FF000020D020400000001020D020C000000208E
-:10200000020D021000000040020D0214000000400A
-:10201000020D022000000003020D0224000000183F
-:10202000060D028000000012040D0300001803FFDB
-:10203000060D03600000000C020D004C00000001C2
-:10204000020D005000000002020D005400000000CC
-:10205000020D005800000008060D005C000000049E
-:10206000020D00C400000004020D00040000000185
-:10207000020D000800000001020D000C000000012C
-:10208000020D001000000001020D0014000000010C
-:10209000020D001800000001020D001C00000001EC
-:1020A000020D002000000001020D002400000001CC
-:1020B000020D002800000001020D002C00000001AC
-:1020C000020D003000000001020D0034000000018C
-:1020D000020D003800000001020D003C000000016C
-:1020E000020D011400000009020D011C0000000A8D
-:1020F000020D012400000000020D012C0000000070
-:10210000020D013400000000020D013C0000000B34
-:10211000020D014400000000020D0118000000291A
-:10212000020D01200000002A020D012800000020FD
-:10213000020D013000000020020D013800000020D7
-:10214000020D01400000002B020D0148000000209C
-:10215000020D011400000019020D011C0000001AFC
-:10216000020D012400000010020D012C00000010DF
-:10217000020D013400000010020D013C0000001BA4
-:10218000020D014400000010020D0118000000398A
-:10219000020D01200000003A020D0128000000306D
-:1021A000020D013000000030020D01380000003047
-:1021B000020D01400000003B020D0148000000300C
-:1021C000020D011400000049020D011C0000004A2C
-:1021D000020D012400000040020D012C000000400F
-:1021E000020D013400000040020D013C0000004BD4
-:1021F000020D014400000040020D011800000069BA
-:10220000020D01200000006A020D0128000000609C
-:10221000020D013000000060020D01380000006076
-:10222000020D01400000006B020D0148000000603B
-:10223000020D011400000059020D011C0000005A9B
-:10224000020D012400000050020D012C000000507E
-:10225000020D013400000050020D013C0000005B43
-:10226000020D014400000050020D01180000007929
-:10227000020D01200000007A020D0128000000700C
-:10228000020D013000000070020D013800000070E6
-:10229000020D01400000007B020D014800000070AB
-:1022A000060E200000000800020E004C0000003264
-:1022B000020E009402150020020E00980215002064
-:1022C000020E009C00000030020E00A0081000006A
-:1022D000020E00A400000036020E00A8000000302C
-:1022E000020E00AC00000031020E00B4000000033A
-:1022F000020E00B800000000020E00C40000000042
-:10230000020E00CC00000006020E00D80000000102
-:10231000020E014400000001020E014C0000000109
-:10232000020E015000000002020E02040000000133
-:10233000020E020C00000040020E021000000040DD
-:10234000020E021C00000004020E02200000002009
-:10235000020E02240000000E020E02280000001BE4
-:10236000060E030000000012040E0280001B04177A
-:10237000060E02EC00000005020E00540000000CE6
-:10238000020E00580000000C020E005C000000006D
-:10239000020E006000000010020E00640000001039
-:1023A000060E006800000003020E00DC00000003BF
-:1023B000020E000400000001020E000800000001EF
-:1023C000020E000C00000001020E001000000001CF
-:1023D000020E001400000001020E001800000001AF
-:1023E000020E001C00000001020E0020000000018F
-:1023F000020E002400000001020E0028000000016F
-:10240000020E002C00000001020E0030000000014E
-:10241000020E003400000001020E0038000000012E
-:10242000020E003C00000001020E0040000000010E
-:10243000020E004400000001020E01100000000F17
-:10244000020E011800000000020E01200000000032
-:10245000020E012800000000020E01140000002FEF
-:10246000020E011C00000020020E012400000020CA
-:10247000020E012C00000020020E01100000001FBF
-:10248000020E011800000010020E012000000010D2
-:10249000020E012800000010020E01140000003F8F
-:1024A000020E011C00000030020E0124000000306A
-:1024B000020E012C00000030020E01100000004F3F
-:1024C000020E011800000040020E01200000004032
-:1024D000020E012800000040020E01140000006FEF
-:1024E000020E011C00000060020E012400000060CA
-:1024F000020E012C00000060020E01100000005FBF
-:10250000020E011800000050020E012000000050D1
-:10251000020E012800000050020E01140000007F8E
-:10252000020E011C00000070020E01240000007069
-:10253000020E012C000000700730040000D60000DD
-:10254000083007D80005043207340000322A0000A2
-:102550000734800031300C8B0735000038D018D894
-:10256000073580002F82270D07360000263632EE11
-:102570000836710031E00434023000BC0000003045
-:1025800001300000000000000130000400000000E5
-:1025900001300008000000000130000C00000000C5
-:1025A00001300010000000000130001400000000A5
-:1025B0000230002000000001023000240000000270
-:1025C00002300028000000030230002C0000000050
-:1025D000023000300000000402300034000000012E
-:1025E00002300038000000000230003C0000000112
-:1025F00002300040000000040230004400000000EF
-:1026000002300048000000010230004C00000003CE
-:1026100002300050000000000230005400000001B1
-:1026200002300058000000040230005C000000008E
-:10263000023000600000000102300064000000036E
-:1026400002300068000000000230006C0000000151
-:10265000023000700000000402300074000000002E
-:1026600002300078000000040230007C000000030B
-:102670000630008000000002023000A400007FFF4E
-:10268000023000A8000003FF023002240000000016
-:1026900002300234000000000230024C0000000052
-:1026A000023002E40000FFFF0630200000000800B6
-:1026B00002338BC000000001023380000000001ACA
-:1026C000023380400000004E023380800000001082
-:1026D000023380C0000000200C33830000086470C7
-:1026E0000A338300000001570B3383000000055FAD
-:1026F0000A338340000000000C33834000000226B0
-:102700000B338340000000010233838000086470B3
-:10271000023383C00000022602331480000000014F
-:102720000A3314800000000006328000000001021D
-:1027300006322008000000C8063220000000000217
-:1027400004328520008F04360632875C00000009C1
-:1027500006323EB00000000606323ED00000000205
-:1027600006323E800000000A04323EA8000204C582
-:1027700006323E00000000200632500000000940F2
-:102780000632400000000004043294C0000204C776
-:1027900006324110000000020632D0000000007036
-:1027A0000632DB00000000D40632DEA0000000028A
-:1027B0000632E00000000800063324000000011883
-:1027C0000632100000000188063250000000002090
-:1027D00006325100000000200632520000000020A6
-:1027E0000632530000000020063254000000002092
-:1027F000063255000000002006325600000000207E
-:102800000632570000000020063258000000002069
-:10281000063259000000002006325A000000002055
-:1028200006325B000000002006325C000000002041
-:1028300006325D000000002006325E00000000202D
-:1028400006325F0000000020063284F00000000223
-:1028500004328500000204C9063285080000000227
-:102860000632DE90000000020633286000000118E6
-:102870000632162000000188063250800000002039
-:1028800006325180000000200632528000000020F5
-:1028900006325380000000200632548000000020E1
-:1028A00006325580000000200632568000000020CD
-:1028B00006325780000000200632588000000020B9
-:1028C000063259800000002006325A8000000020A5
-:1028D00006325B800000002006325C800000002091
-:1028E00006325D800000002006325E80000000207D
-:1028F00006325F8000000020063284F800000002EB
-:1029000004328510000204CB063285180000000254
-:102910000632DE98000000020232845000000000FF
-:102920000632401000000002023284540000000011
-:1029300006324020000000020232845800000000ED
-:1029400006324030000000020232845C00000000C9
-:1029500006324040000000020232846000000000A5
-:102960000632405000000002023284640000000081
-:10297000063240600000000202328468000000005D
-:1029800006324070000000020232846C0000000039
-:10299000063240800000000207200400007300009F
-:1029A00008200780001004CD072400002AF1000051
-:1029B0000724800027670ABD0824D35063FC04CF96
-:1029C000022000BC000000300120000000000000D8
-:1029D00001200004000000000120000800000000A9
-:1029E0000120000C00000000012000100000000089
-:1029F000012000140000000002200020000000015F
-:102A00000220002400000002022000280000000331
-:102A10000220002C00000000022000300000000412
-:102A200002200034000000010220003800000000F5
-:102A30000220003C000000010220004000000004D1
-:102A400002200044000000000220004800000001B5
-:102A50000220004C00000003022000500000000093
-:102A60000220005400000001022000580000000471
-:102A70000220005C00000000022000600000000155
-:102A80000220006400000003022000680000000033
-:102A90000220006C00000001022000700000000411
-:102AA00002200074000000000220007800000004F2
-:102AB0000220007C000000030620008000000002CD
-:102AC000022000A400007FFF022000A8000003FFF6
-:102AD0000220022400000000022002340000000056
-:102AE0000220024C00000000022002E40000FFFF70
-:102AF000062020000000080002238BC00000000117
-:102B00000223800000000010022380400000001219
-:102B10000223808000000030022380C00000000EED
-:102B20000C238300000864700A238300000001570F
-:102B30000B2383000000055F0A2383400000000090
-:102B40000C238340000002260B2383400000000179
-:102B50000223838000086470022383C000000226E1
-:102B600002231480000000010A23148000000000EA
-:102B7000062210000000004206222008000000C8C3
-:102B800006222000000000020622B00000000330F0
-:102B90000622F400000000530422F54C000104D189
-:102BA0000622F550000000030422F55C000104D267
-:102BB0000622F560000000030422F56C000104D336
-:102BC0000622F570000000030422F57C000104D405
-:102BD0000622F580000000030422F58C000104D5D4
-:102BE0000622F590000000030422F59C000104D6A3
-:102BF0000622F5A0000000030422F5AC000104D772
-:102C00000622F5B0000000030422F5BC000104D840
-:102C10000622F5C0000000460622E2000000044043
-:102C200004221240009004D906223000000000C0A7
-:102C30000622670000000100062290000000040048
-:102C400004226B0800200569062211F0000000062E
-:102C50000422120800060589062212200000000244
-:102C600006224000000005C00622C0000000000649
-:102C70000422C0180006058F0622C0300000000A9A
-:102C80000422C058000605950622C0700000000A04
-:102C90000422C0980006059B0622C0B00000000A6E
-:102CA0000422C0D8000605A10622C0F00000000AD8
-:102CB0000422C118000605A70622C1300000000A40
-:102CC0000422C158000605AD0622C1700000000AAA
-:102CD0000422C198000605B30622C1B00000000A14
-:102CE0000422C1D8000605B90622C1F00000000A7E
-:102CF0000422C218000605BF0622C2300000000AE6
-:102D00000422C258000605C50622C2700000000A4F
-:102D10000422C298000605CB0622C2B00000000AB9
-:102D20000422C2D8000605D10622C2F00000000A23
-:102D30000422C318000605D70622C3300000000A8B
-:102D40000422C358000605DD0622C3700000000AF5
-:102D50000422C398000605E30622C3B00000000A5F
-:102D60000422C3D8000605E90622C3F00000000AC9
-:102D70000422C418000605EF0622C4300000000A31
-:102D80000422C458000605F50622C4700000000A9B
-:102D90000422C498000605FB0622C4B00000000A05
-:102DA0000422C4D8000606010622C4F00000000A6E
-:102DB0000422C518000606070622C5300000000AD6
-:102DC0000422C5580006060D0622C5700000000A40
-:102DD0000422C598000606130622C5B00000000AAA
-:102DE0000422C5D8000606190622C5F00000000A14
-:102DF0000422C6180006061F0622C6300000000A7C
-:102E00000422C658000606250622C6700000000AE5
-:102E10000422C6980006062B0622C6B00000000A4F
-:102E20000422C6D8000606310622C6F00000000AB9
-:102E30000422C718000606370622C7300000000A21
-:102E40000422C7580006063D0622C7700000000A8B
-:102E50000422C798000606430622C7B00000000AF5
-:102E60000422C7D8000606490622C7F00000000A5F
-:102E70000422C8180006064F0622C8300000000AC7
-:102E80000422C858000606550622C8700000000A31
-:102E90000422C8980006065B0622C8B00000000A9B
-:102EA0000422C8D8000606610622C8F00000000A05
-:102EB0000422C918000606670622C9300000000A6D
-:102EC0000422C9580006066D0622C9700000000AD7
-:102ED0000422C998000606730622C9B00000000A41
-:102EE0000422C9D8000606790622C9F00000000AAB
-:102EF0000422CA180006067F0622CA300000000A13
-:102F00000422CA58000606850622CA700000000A7C
-:102F10000422CA980006068B0622CAB00000000AE6
-:102F20000422CAD8000606910622CAF00000000A50
-:102F30000422CB18000606970622CB300000000AB8
-:102F40000422CB580006069D0622CB700000000A22
-:102F50000422CB98000606A30622CBB00000000A8C
-:102F60000422CBD8000606A90622CBF00000000AF6
-:102F70000422CC18000606AF0622CC300000000A5E
-:102F80000422CC58000606B50622CC700000000AC8
-:102F90000422CC98000606BB0622CCB00000000A32
-:102FA0000422CCD8000606C10622CCF00000000A9C
-:102FB0000422CD18000606C70622CD300000000A04
-:102FC0000422CD58000606CD0622CD700000000A6E
-:102FD0000422CD98000606D30622CDB00000000AD8
-:102FE0000422CDD8000606D90622CDF00000000A42
-:102FF0000422CE18000606DF0622CE300000000AAA
-:103000000422CE58000606E50622CE700000000A13
-:103010000422CE98000606EB0622CEB00000000A7D
-:103020000422CED8000606F10622CEF00000000AE7
-:103030000422CF18000606F70622CF300000000A4F
-:103040000422CF58000606FD0622CF700000000AB9
-:103050000422CF98000607030622CFB00000000A22
-:103060000422CFD8000607090622CFF00000000A8C
-:103070000422D0180006070F0622D0300000000AF4
-:103080000422D058000607150622D0700000000A5E
-:103090000422D0980006071B0622D0B00000000AC8
-:1030A0000422D0D8000607210622D0F00000000A32
-:1030B0000422D118000607270622D1300000000A9A
-:1030C0000422D1580006072D0622D1700000000A04
-:1030D0000422D198000607330622D1B00000000A6E
-:1030E0000422D1D8000607390622D1F00000000AD8
-:1030F0000422D2180006073F0622D2300000000A40
-:103100000422D258000607450622D2700000000AA9
-:103110000422D2980006074B0622D2B00000000A13
-:103120000422D2D8000607510622D2F00000000A7D
-:103130000422D318000607570622D3300000000AE5
-:103140000422D3580006075D0622D3700000000A4F
-:103150000422D398000607630622D3B00000000AB9
-:103160000422D3D8000607690622D3F00000000A23
-:103170000422D4180006076F0622D4300000000A8B
-:103180000422D458000607750622D4700000000AF5
-:103190000422D4980006077B0622D4B00000000A5F
-:1031A0000422D4D8000607810622D4F00000000AC9
-:1031B0000422D518000607870622D5300000000A31
-:1031C0000422D5580006078D0622D5700000000A9B
-:1031D0000422D598000607930622D5B00000000A05
-:1031E0000422D5D8000607990622D5F00000000A6F
-:1031F0000422D6180006079F0622D6300000000AD7
-:103200000422D658000607A50622D6700000000A40
-:103210000422D698000607AB0622D6B00000000AAA
-:103220000422D6D8000607B10622D6F00000000A14
-:103230000422D718000607B70622D7300000000A7C
-:103240000422D758000607BD0622D7700000000AE6
-:103250000422D798000607C30622D7B00000000A50
-:103260000422D7D8000607C90622D7F00000000ABA
-:103270000422D818000607CF0622D8300000000A22
-:103280000422D858000607D50622D8700000000A8C
-:103290000422D898000607DB0622D8B00000000AF6
-:1032A0000422D8D8000607E10622D8F00000000A60
-:1032B0000422D918000607E70622D9300000000AC8
-:1032C0000422D958000607ED0622D9700000000A32
-:1032D0000422D998000607F30622D9B00000000A9C
-:1032E0000422D9D8000607F90622D9F00000000A06
-:1032F0000422DA18000607FF0622DA300000000A6E
-:103300000422DA58000608050622DA700000000AD6
-:103310000422DA980006080B0622DAB00000000A40
-:103320000422DAD8000608110622DAF00000000AAA
-:103330000422DB18000608170622DB300000000A12
-:103340000422DB580006081D0622DB700000000A7C
-:103350000422DB98000608230622DBB00000000AE6
-:103360000422DBD8000608290622DBF00000000A50
-:103370000422DC180006082F0622DC300000000AB8
-:103380000422DC58000608350622DC700000000A22
-:103390000422DC980006083B0622DCB00000000A8C
-:1033A0000422DCD8000608410622DCF00000000AF6
-:1033B0000422DD18000608470622DD300000000A5E
-:1033C0000422DD580006084D0622DD700000000AC8
-:1033D0000422DD98000608530622DDB00000000A32
-:1033E0000422DDD8000608590622DDF00000000A9C
-:1033F0000422DE180006085F0622DE300000000A04
-:103400000422DE58000608650622DE700000000A6D
-:103410000422DE980006086B0622DEB00000000AD7
-:103420000422DED8000608710622DEF00000000A41
-:103430000422DF18000608770622DF300000000AA9
-:103440000422DF580006087D0622DF700000000A13
-:103450000422DF98000608830622DFB00000000A7D
-:103460000422DFD8000608890622DFF00000000AE7
-:103470000422E0180006088F0622E0300000000A4F
-:103480000422E058000608950622E0700000000AB9
-:103490000422E0980006089B0622E0B00000000A23
-:1034A0000422E0D8000608A10622E0F00000000A8D
-:1034B0000422E118000608A70622E1300000000AF5
-:1034C0000422E158000608AD0622E1700000000A5F
-:1034D0000422E198000608B30622E1B00000000AC9
-:1034E0000422E1D8000608B90622E1F00000000439
-:1034F0000622153800000002062211E80000000232
-:103500000622F3000000000802221148000000001B
-:1035100006225900000000060622330000000002C7
-:1035200006226040000000300622F3200000000860
-:103530000222114C0000000006225918000000066B
-:10354000062233080000000206226100000000305D
-:103550000622F34000000008022211500000000083
-:103560000622593000000006062233100000000237
-:10357000062261C0000000300622F360000000084F
-:1035800002221154000000000622594800000006E3
-:10359000062233180000000206226280000000307C
-:1035A0000622F380000000080222115800000000EB
-:1035B00006225960000000060622332000000002A7
-:1035C00006226340000000300622F3A0000000083D
-:1035D0000222115C0000000006225978000000065B
-:1035E000062233280000000206226400000000309A
-:1035F0000622F3C000000008022211600000000053
-:103600000622599000000006062233300000000216
-:10361000062264C0000000300622F3E0000000082B
-:103620000222116400000000062259A800000006D2
-:1036300006223338000000020622658000000030B8
-:103640000216100000000028021700080000000207
-:103650000217002C000000030217003C00000004C9
-:10366000021700440000000002170048000000029A
-:103670000217004C0000009002170050000000905C
-:103680000217005400800090021700580810000034
-:10369000021700700000000602170078000009FF02
-:1036A0000217007C0000076C021701C4081000001C
-:1036B0000217034400000001021704000000008A02
-:1036C00002170404000000800217040800000081B3
-:1036D0000217040C00000080021704100000008A8A
-:1036E0000217041400000080021704180000008173
-:1036F0000217041C00000080021704300000008A3A
-:103700000217043400000080021704380000008112
-:103710000217043C00000080021704400000008AE9
-:1037200002170444000000800217044800000081D2
-:103730000217044C00000080021704800000008A79
-:103740000217048400000080021704880000008132
-:103750000217048C0000008002170038007C10045F
-:10376000021700040000000F021701EC0000000225
-:10377000021701F400000002021701EC0000000231
-:10378000021701F400000002021701EC0000000221
-:10379000021701F400000002021701EC0000000211
-:1037A000021701F400000002021701EC0000000201
-:1037B000021701F400000002021701EC00000002F1
-:1037C000021701F400000002021701EC00000002E1
-:1037D000021701F400000002021701EC00000002D1
-:1037E000021701F400000002061640240000000247
-:1037F000021640700000001C021642080000000182
-:1038000002164210000000010216422000000001D2
-:10381000021642280000000102164230000000019A
-:103820000216423800000001021642600000000249
-:103830000C16401C0003D0900A16401C0000009C8F
-:103840000B16401C000002710216403000000028D8
-:10385000021640340000002C0216403800000030F0
-:103860000216404400000020021640000000000143
-:10387000021640D8000000010216400800000001B6
-:103880000216400C0000000102164010000000016A
-:1038900002164240000000000216424800000000EC
-:1038A000061642700000000202164250000000009E
-:1038B0000216425800000000061642800000000276
-:1038C00002166008000012140216600C00001200BC
-:1038D00002166010000012040216601C0000FFFFB8
-:1038E000021660200000FFFF021660240000FFFFA8
-:1038F000021660280000FFFF02166038000000205A
-:103900000216603C00000010061660400000000235
-:1039100002166048000000230216604C00000024DC
-:1039200002166050000000250216605400000026B8
-:1039300002166058000000270216605C00000011AB
-:103940000216606000000000021660640000002B98
-:10395000021660680000002C0216606C0000002D4A
-:1039600002166070000000EC021660740000000097
-:1039700002166078000000290216607C0000002A10
-:10398000021660800000002F061660840000000D03
-:10399000021660B800000001061660BC00000008B6
-:1039A000021660DC00000001061660E00000000462
-:1039B000021660F000000001061660F4000000032B
-:1039C0000216610000000001061661040000002DCF
-:1039D000021661B800000001061661BC0000000874
-:1039E000021661DC00000001061661E00000000420
-:1039F000021661F000000001061661F400000003E9
-:103A00000216620000000001061662040000000DAC
-:103A10000216623807FFFFFF0216623C0000007FBB
-:103A20000216624007FFFFFF021662440000003FDB
-:103A300001166248000000000116624C0000000000
-:103A400001166250000000000116625400000000E0
-:103A500001166258000000000116625C00000000C0
-:103A600001166260000000000116626400000000A0
-:103A700001166268000000000116626C0000000080
-:103A80000116627000000000011662740000000060
-:103A900001166278000000000116627C0000000040
-:103AA000011662D400000000021662D80000FFFF79
-:103AB000021662DC0000FFFF021662E00000FFFF5A
-:103AC000021662E40000FFFF0C166000000003E82D
-:103AD0000A166000000000010B16600000000003E1
-:103AE0000216804000000006021680440000000517
-:103AF000021680480000000A0216804C00000005F3
-:103B00000216805400000002021680CC000000045F
-:103B1000021680D000000004021680D400000004C9
-:103B2000021680D800000004021680DC00000004A9
-:103B3000021680E000000004021680E40000000489
-:103B4000021680E800000004021688040000000647
-:103B5000021680300000007C021680340000003D18
-:103B6000021680380000003F0216803C0000009CD6
-:103B70000216E6E8000060000216E6EC00006000B5
-:103B80000216E6F0000060000216E6F40000600095
-:103B900002168234000025E40216823800008000FC
-:103BA00002168094000025E3021681F400000C0840
-:103BB000021681F800000040021681FC000001009E
-:103BC0000216820000000020021682040000001786
-:103BD00002168208000000800216820C000002001B
-:103BE00002168210000000000216823C0000001342
-:103BF00002168220008F008F0216821C008F008F19
-:103C0000021680F0000000070216821801FF01FF73
-:103C10000216821401FF01FF061680F40000000264
-:103C20000216811C0000000502168120000000051C
-:103C300002168124000000050216812800000008F9
-:103C40000216812C000000060216813000000007D9
-:103C50000616813400000004021680FC00000000FB
-:103C600006168144000000020216814C0000000488
-:103C7000021681500000000102168154000000026B
-:103C800002168158000000050216815C0000000544
-:103C90000216816000000005021681640000000524
-:103CA0000216816800000008021681000000000072
-:103CB0000216816C000000060216817000000007E9
-:103CC00006168174000000060216818C00000004B4
-:103CD000021681900000000102168104000000001D
-:103CE000021681940000000202168198000000056F
-:103CF0000216819C00000005021681A0000000054C
-:103D0000021681A400000005021681A80000000828
-:103D1000021681AC00000006021681B00000000708
-:103D2000061681B40000000202168108000000009F
-:103D3000061681BC00000004021681CC00000004BD
-:103D4000021681D000000001021681D4000000029A
-:103D5000021681D800000005021681DC0000000573
-:103D6000021681E0000000050216810C000000042C
-:103D7000021681E400000005021681E80000000838
-:103D8000021681EC00000006021681F00000000718
-:103D900002168110000000010216811400000002CA
-:103DA00002168118000000050216809C0000004CDD
-:103DB000021680A00000004C061680C4000000021D
-:103DC000021680A400000000021680A80000000077
-:103DD000021680AC0000004C061680B00000000502
-:103DE0000216E6F80000020402168240003F003F7F
-:103DF00002168244003F003F061682900000000435
-:103E000002168248008000800216824C00800080EA
-:103E100002168250010001000216825401000100C6
-:103E20000616825800000002021682600040004020
-:103E30000216826400400040021682681E001E00C6
-:103E40000216826C1E001E000216827040004000A6
-:103E500002168274400040000216827880008000C2
-:103E60000216827C800080000216828020002000E2
-:103E700002168284200020000616828800000002BC
-:103E8000021680900000004B021680600000014086
-:103E900002168064000001400616808800000002BF
-:103EA00002168068000000000216806C000000000E
-:103EB00002168070000000C0061680740000000525
-:103EC0000216880C0101010102168810010120046C
-:103ED000021688142008100102168818010101201A
-:103EE0000216881C0101010102168820010120042C
-:103EF00002168824200810010216882801010120DA
-:103F00000216882C200810010216883001010120B9
-:103F100002168834010101010216883801012004CB
-:103F20000216883C20081001021688400101012079
-:103F3000021688440101010102168848010120048B
-:103F40000216E6BC000000000216E6C000000002F7
-:103F50000216E6C4000000040216E6C800000006CF
-:103F60000216E79400000001021680EC000000FF3A
-:103F700002140000000000010215C024000000002F
-:103F80000215C0EC000000010215C0F000000001A5
-:103F90000615C10000000002021400040000000128
-:103FA00002140008000000010214000C00000001CF
-:103FB000021400300000000102140034000000016F
-:103FC0000214004000000001021400440000FFFF42
-:103FD00006140004000000030214000000000000AA
-:103FE000060280000000200002020058000000329B
-:103FF000020200A003150020020200A40315002005
-:10400000020200A801000030020200AC081000000B
-:10401000020200B000000036020200B400000030CE
-:10402000020200B800000031020200BC00000002E1
-:10403000020200C000000005020200C400000002ED
-:10404000020200C800000002020200D000000007C7
-:10405000020200DC00000000020200E00000000597
-:10406000020200E400000003020200F00000000170
-:10407000020200FC00000006020201200000000015
-:104080000202013400000002020201B0000000013F
-:104090000202020C000000010202021400000001F2
-:1040A00002020218000000020202040400000001E3
-:1040B0000202040C00000040020204100000004054
-:1040C0000202041C00000004020204200000002080
-:1040D0000202042400000002020204280000002062
-:1040E000060205000000001204020480002008BF40
-:1040F000020200600000000F0202006400000007DE
-:1041000002020068000000000202006C0000000EC5
-:10411000020200700000000E06020074000000039E
-:10412000020200F40000000402020004000000018A
-:1041300002020008000000010202000C0000000161
-:104140000202001000000001020200140000000141
-:1041500002020018000000010202001C0000000121
-:104160000202002000000001020200240000000101
-:1041700002020028000000010202002C00000001E1
-:1041800002020030000000010202003400000001C1
-:1041900002020038000000010202003C00000001A1
-:1041A0000202004000000001020200440000000181
-:1041B00002020048000000010202004C0000000161
-:1041C000020200500000000102020108000000C8C5
-:1041D0000202011800000002020201C400000000F7
-:1041E000020201CC00000000020201D40000000223
-:1041F000020201DC00000002020201E4000000FFF4
-:10420000020201EC000000FF0202010000000000B9
-:104210000202010C000000C80202011C00000002A2
-:10422000020201C800000000020201D000000000EC
-:10423000020201D800000002020201E000000002B8
-:10424000020201E8000000FF020201F0000000FF8E
-:10425000020201040000002002020108000000C860
-:104260000202011800000002020201C40000000066
-:10427000020201CC00000000020201D40000000292
-:10428000020201DC00000002020201E4000000FF63
-:10429000020201EC000000FF020201000000001019
-:1042A0000202010C000000C80202011C0000000212
-:1042B000020201C800000000020201D0000000005C
-:1042C000020201D800000002020201E00000000228
-:1042D000020201E8000000FF020201F0000000FFFE
-:1042E000020201040000003002020108000000C8C0
-:1042F0000202011800000002020201C400000000D6
-:10430000020201CC00000000020201D40000000201
-:10431000020201DC00000002020201E4000000FFD2
-:10432000020201EC000000FF020201000000004058
-:104330000202010C000000C80202011C0000000281
-:10434000020201C800000000020201D000000000CB
-:10435000020201D800000002020201E00000000297
-:10436000020201E8000000FF020201F0000000FF6D
-:10437000020201040000006002020108000000C8FF
-:104380000202011800000002020201C40000000045
-:10439000020201CC00000000020201D40000000271
-:1043A000020201DC00000002020201E4000000FF42
-:1043B000020201EC000000FF0202010000000050B8
-:1043C0000202010C000000C80202011C00000002F1
-:1043D000020201C800000000020201D0000000003B
-:1043E000020201D800000002020201E00000000207
-:1043F000020201E8000000FF020201F0000000FFDD
-:1044000002020104000000700728040000B500004B
-:10441000082807B8000908DF072C000028E9000079
-:10442000072C800036700A3B072D000035BE17D8D8
-:10443000072D80003B1B2548072E000035D8340F80
-:10444000072E80001B224186082EBFD0280608E1D7
-:10445000022800BC0000003001280000000000001D
-:1044600001280004000000000128000800000000EE
-:104470000128000C000000000128001000000000CE
-:1044800001280014000000000228002000000001A4
-:104490000228002400000002022800280000000377
-:1044A0000228002C00000000022800300000000458
-:1044B000022800340000000102280038000000003B
-:1044C0000228003C00000001022800400000000417
-:1044D00002280044000000000228004800000001FB
-:1044E0000228004C000000030228005000000000D9
-:1044F00002280054000000010228005800000004B7
-:104500000228005C0000000002280060000000019A
-:104510000228006400000003022800680000000078
-:104520000228006C00000001022800700000000456
-:104530000228007400000000022800780000000437
-:104540000228007C00000003062800800000000212
-:10455000022800A400007FFF022800A8000003FF3B
-:10456000022802240000000002280234000000009B
-:104570000228024C00000000022802E40000FFFFB5
-:104580000628200000000800022B8BC0000000015C
-:10459000022B800000000000022B80400000001869
-:1045A000022B80800000000C022B80C000000066FF
-:1045B0000C2B8300000864700A2B83000000015755
-:1045C0000B2B83000000055F0A2B834000000000D6
-:1045D0000C2B8340000002260B2B834000000001BF
-:1045E000022B838000086470022B83C00000022627
-:1045F000022B1480000000010A2B14800000000030
-:10460000022B944000000001062B94480000000299
-:10461000062A9A7000000004042A9A80000408E325
-:10462000062A9A9000000002042A9A98000208E7DD
-:10463000062A900000000048062A2008000000C852
-:10464000062A200000000002062A912800000086A9
-:10465000062AC00000000120062A9348000000033B
-:10466000042A9354000108E9062A9FB000000002C2
-:10467000042A9418000208EA042A9CD0000108ECDD
-:10468000062A9CD400000011042A9D20008F08ED0A
-:10469000062A9F5C00000005042A30000002097C05
-:1046A000062A300800000100062A404000000010E1
-:1046B000042A40000010097E042A84080002098EA2
-:1046C000042ACF4000040990042ACF600002099414
-:1046D000062A9FA000000004062A60000000054092
-:1046E000062A9D1800000002062AB00000000050B3
-:1046F000062ABB7000000070062ABB68000000029A
-:10470000062AB94800000004062AD000000008006C
-:10471000062AC48000000150062A942000000032BE
-:10472000062A502000000002062A50300000000235
-:10473000062A500000000002062A50100000000265
-:10474000022A520800000001042A9AA000020996D9
-:10475000062A95B000000022042A96380001099824
-:10476000062A963C00000003062A96E0000000227C
-:10477000042A976800010999062A976C0000000333
-:10478000062A981000000022042A98980001099A2D
-:10479000062A989C00000003062A99400000002287
-:1047A000042A99C80001099B062A99CC000000033D
-:1047B000062ABB5800000002062AC9C000000150AA
-:1047C000062A94E800000032062A50280000000261
-:1047D000062A503800000002062A50080000000295
-:1047E000062A501800000002022A520C00000001A4
-:1047F000042A9AA80002099C062A96480000002272
-:10480000042A96D00001099E062A96D400000003CF
-:10481000062A977800000022042A98000001099FC8
-:10482000062A980400000003062A98A80000002227
-:10483000042A9930000109A0062A993400000003D7
-:10484000062A99D800000022042A9A60000109A1D2
-:10485000062A9A6400000003062ABB6000000002DA
-:10486000022ACF0000000000042A9AB0001009A21A
-:10487000062A50480000000E022ACF040000000063
-:10488000042A9AF0001009B2062A50800000000E97
-:10489000022ACF0800000000042A9B30001009C241
-:1048A000062A50B80000000E022ACF0C00000000BB
-:1048B000042A9B70001009D2062A50F00000000E56
-:1048C000022ACF1000000000042A9BB0001009E269
-:1048D000062A51280000000E022ACF140000000012
-:1048E000042A9BF0001009F2062A51600000000E15
-:1048F000022ACF1800000000042A9C3000100A028F
-:10490000062A51980000000E022ACF1C0000000069
-:10491000042A9C7000100A12062A51D00000000ED2
-:1049200002101008000000010210105000000001E9
-:10493000021010000003D000021010040000003D1F
-:104940000910180002000A220910110000100C22A0
-:1049500006101140000000080910116000100C3210
-:10496000061011A00000001806102400000000E04E
-:104970000210201C00000000021020200000000196
-:10498000021020C0000000020210200400000001FC
-:104990000210200800000001021030D800000001C1
-:1049A00009103C0000050C420910380000050C47B6
-:1049B0000910392000050C4C09103B0000050C5172
-:1049C000021040D400000030021040D80000003037
-:1049D00006104C00000001000210402800000010EA
-:1049E0000210404400003FFF021040580028000021
-:1049F000021040840084924A0210405800000000D7
-:104A0000021041380000000102104138000000018E
-:104A1000021041380000000102104138000000017E
-:104A2000021041380000000102104138000000016E
-:104A3000021041380000000102104138000000015E
-:104A40000212049001F680400212051400003C108E
-:104A500002120494FFFFFFFF02120498FFFFFFFF02
-:104A60000212049CFFFFFFFF021204A0FFFFFFFFE2
-:104A7000021204A4FFFFFFFF021204A8FFFFFFFFC2
-:104A8000021204ACFFFFFFFF021204B0FFFFFFFFA2
-:104A9000021204B8FFFFFFFF021204BCFFFFFFFF7A
-:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
-:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
-:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
-:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
-:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
-:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
-:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
-:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
-:104B200002120504FFFFFFFF02120508FFFFFFFF4F
-:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
-:104B4000021204D4F800C000021204B4F0005000B5
-:104B500002120390000000080212039C00000008EB
-:104B6000021203A000000008021203A400000002C9
-:104B7000021203BC00000004021203C00000000582
-:104B8000021203C400000004021203D0000000005F
-:104B90000212036C00000001021201BC0000004080
-:104BA000021201C000001808021201C4000008032C
-:104BB000021201C800000803021201CC00000040EC
-:104BC000021201D000000003021201D40000080309
-:104BD000021201D800000803021201DC00000803E1
-:104BE000021201E000010003021201E400000803C8
-:104BF000021201E800000803021201EC00000003A9
-:104C0000021201F000000003021201F40000000390
-:104C1000021201F800000003021201FC0000000370
-:104C2000021202000000000302120204000000034E
-:104C300002120208000000030212020C000000032E
-:104C4000021202100000000302120214000000030E
-:104C500002120218000000030212021C00000003EE
-:104C600002120220000000030212022400000003CE
-:104C700002120228000024030212022C0000002F5E
-:104C80000212023000000009021202340000001972
-:104C900002120238000001840212023C000001836B
-:104CA0000212024000000306021202440000001932
-:104CB00002120248000000060212024C0000030625
-:104CC0000212025000000306021202540000030602
-:104CD0000212025800000C860212025C0000030659
-:104CE00002120260000003060212026400000006C5
-:104CF00002120268000000060212026C00000006A8
-:104D00000212027000000006021202740000000687
-:104D100002120278000000060212027C0000000667
-:104D20000212028000000006021202840000000647
-:104D300002120288000000060212028C0000000627
-:104D40000212029000000006021202940000000607
-:104D500002120298000000060212029C00000006E7
-:104D6000021202A000000306021202A400000013B7
-:104D7000021202A800000006021202B00000100495
-:104D8000021202B400001004021203240010644056
-:104D90000212032800106440021205B40000000152
-:104DA000021205F800000040021205FC0000001984
-:104DB00002120600000000010212066C0000000151
-:104DC000021201B000000001021207D80000000327
-:104DD000021207D800000003021207D800000003E7
-:104DE000021207D800000003021207D800000003D7
-:104DF000021207D800000003021207D800000003C7
-:104E0000021207D8000000030600A0000000000CFA
-:104E10000200A050000000000200A05400000000AA
-:104E20000200A0EC555400000200A0F05555555565
-:104E30000200A0F4000055550200A0F8F0000000A8
-:104E40000200A0FC555400000200A1005555555524
-:104E50000200A104000055550200A108F000000066
-:104E60000200A19C000000000200A1A000010000BF
-:104E70000200A1A4000050140200A1A8000000003C
-:104E80000200A6A8000000000200A6AC000000007E
-:104E90000200A6D0000000000200A45C00000C008C
-:104EA0000200A61C000000030200A070FFF55FFFD7
-:104EB0000200A0740000FFFF0200A078F00003E0F1
-:104EC0000200A07C000000000200A0800000A00002
-:104ED0000600A084000000050200A0980FE000007A
-:104EE0000600A09C000000070200A0B8000004001B
-:104EF0000600A0BC000000030200A0C800001000D3
-:104F00000600A0CC000000030200A0D80000400072
-:104F10000600A0DC000000030200A0E80001000081
-:104F20000600A22C000000040200A688000000FC7D
-:104F30000600A68C000000070200A6F40000000096
-:104F40000200A10CFF5C00000200A110FFF55FFF52
-:104F50000200A1140000FFFF0200A118F00003E00E
-:104F60000200A11C000000000200A1200000A0001F
-:104F70000600A124000000050200A1380FE0000097
-:104F80000600A13C000000070200A1580000080034
-:104F90000600A15C000000030200A16800002000E0
-:104FA0000600A16C000000030200A1780000800050
-:104FB0000600A17C000000030200A188000200009E
-:104FC0000600A23C000000040200A6B0000000FCA5
-:104FD0000600A6B4000000070200A6F800000000CA
-:104FE0000200A030000000000200A0340000000019
-:104FF0000200A038000000000200A03C00000000F9
-:105000000200A040000000000200A04400000000D8
-:105010000200A048000000000200A04C00000000B8
-:10502000020090C40000E000020090CC0000F300F9
-:10503000020090D400000003020091A000000001D3
-:105040000600917000000003020090EC0000600078
-:10505000020090F400007300020090FC00000003C6
-:10506000020091A8000000010600918800000003E2
-:10507000020091000000400002009108000053006F
-:105080000200911000000004020091AC0000000139
-:1050900006009194000000020200919C00000001B3
-:1050A000020090D800006000020090E00000730051
-:1050B000020090E800000003020091A4000000013B
-:1050C0000200917C000000010200918000000001BC
-:1050D00002009184000000000200912800000300FB
-:1050E0000200916C0003F0080200912C0000030004
-:1050F0000200913000000300020091340000030020
-:1051000002009138000003000200913C00000300FF
-:1051100002009140000003000200942C00000001F6
-:1051200002009430000000010200943400000001ED
-:105130000200942C000000010200943000000001E5
-:1051400002009434000000010200942C00000001D1
-:1051500002009430000000010200943400000001BD
-:105160000200942C000000010200943000000001B5
-:1051700002009434000000010200942C00000001A1
-:10518000020094300000000102009434000000018D
-:105190000200942C00000001020094300000000185
-:1051A00002009434000000010200942C0000000171
-:1051B000020094300000000102009434000000015D
-:1051C0000200942C00000001020094300000000155
-:1051D0000200943400000001021300780000003047
-:1051E0000213003C000061A8061301080000000340
-:1051F000021301040000000002130134000000004B
-:10520000061301080000000302130104000000005F
-:10521000021301340000000006130108000000031F
-:10522000021301040000000002130134000000001A
-:10523000061301080000000302130104000000002F
-:1052400002130134000000000613010800000003EF
-:1052500002130104000000000213013400000000EA
-:1052600006130108000000030213010400000000FF
-:1052700002130134000000000613010800000003BF
-:1052800002130104000000000213013400000000BA
-:1052900006130108000000030213010400000000CF
-:1052A0000213013400000000021100B800000001E8
-:1052B0000216E6E8000020000216E6EC00002000DE
-:1052C0000216E6F0000065550216E6F4000065558A
-:1052D00002168150000000000216817400000001D7
-:1052E00002168178000000010216817C0000000196
-:1052F0000216818000000001021681840000000176
-:105300000216818800000001021681B4000000012D
-:10531000021681B800000001021681BC00000001E5
-:10532000021681C000000001021681C400000001C5
-:10533000021681C800000001021681100000000062
-:105340000216824000BF00BF061682440000000221
-:105350000216824C00BF00BF0216E6C40000000126
-:105360000216E6C8000000030216E79400000000E1
-:10537000042ACF40000A0C56000000000000000084
-:1053800000000034000000000000000000000000E9
-:10539000000000000000000000000000000000000D
-:1053A0000000000000000000000000000034003594
-:1053B00000000000000000000000000000000000ED
-:1053C00000000000000000000000000000000000DD
-:1053D0000000000000000000003500600000000038
-:1053E00000000000000000000000000000000000BD
-:1053F00000000000000000000000000000000000AD
-:1054000000000000006000910000000000000000AB
-:1054100000910095009500990099009D009D00A1C4
-:1054200000A100A500A500A900A900AD00AD00B134
-:1054300000B100B500000000000000000000000006
-:10544000000000000000000000000000000000005C
-:1054500000000000000000000000000000B5031183
-:105460000311031B031B03250325032C032C033308
-:105470000333033A033A0341034103480348034F0C
-:10548000034F03560356035D0000000000000000B8
-:10549000000000000000000000000000000000000C
-:1054A00000000000000000000000000000000000FC
-:1054B00000000000000000000000000000000000EC
-:1054C00000000000000000000000000000000000DC
-:1054D00000000000000000000000000000000000CC
-:1054E00000000000000000000000000000000000BC
-:1054F00000000000000000000000000000000000AC
-:10550000000000000000000000000000000000009B
-:10551000000000000000000000000000000000008B
-:10552000000000000000000000000000000000007B
-:105530000000000000000000035D035E00000000AA
-:1055400000000000035E035F035F0360036003610C
-:10555000036103620362036303630364036403651B
-:10556000036503660000000000000000000000006A
-:10557000000000000000000000000000000000002B
-:10558000000000000000000000000000000000001B
-:105590000366036D036D0379037903850000000042
-:1055A00000000000000000000000000000000000FB
-:1055B00000000000000000000000000000000000EB
-:1055C00000000000000000000000000000000000DB
-:1055D00000000000000000000000000000000000CB
-:1055E00000000000000000000385038600000000AA
-:1055F00000000000000000000000000000000000AB
-:10560000000000000000000000000000000000009A
-:1056100000000000038603B100000000000000004D
-:10562000000000000000000000000000000000007A
-:10563000000000000000000000000000000000006A
-:1056400003B103E0000000000000000000000000C3
-:10565000000000000000000000000000000000004A
-:1056600000000000000000000000000003E0040F44
-:105670000000000000000000040F04160416041DC2
-:10568000041D04240424042B042B043204320439A2
-:1056900004390440044004470447047A0000000031
-:1056A00000000000047A047E047E048204820486E2
-:1056B0000486048A048A048E048E0492049204965A
-:1056C0000496049A049A04EA04EA05000500051603
-:1056D000051605180518051A051A051C051C051ED2
-:1056E000051E052005200522052205240524052682
-:1056F00005260693000000000000000006930698AF
-:105700000698069D069D06A206A206A706A706AC59
-:1057100006AC06B106B106B606B606BB06BB06BCAD
-:105720000000000000000000000000000000000079
-:105730000000000000000000000000000000000069
-:10574000000000000000000006BC06E000000000B1
-:105750000000000006E006E206E206E406E406E6D3
-:1057600006E606E806E806EA06EA06EC06EC06EEB9
-:1057700006EE06F006F00705070507080708070B01
-:105780000000000000000000000000000000000019
-:105790000000000000000000000000000000000009
-:1057A000070B074F00000000000000000000000091
-:1057B00000000000000000000000000000000000E9
-:1057C000000000000000000000000000074F07E19B
-:1057D00000000000000000000000000000000000C9
-:1057E00000000000000000000000000000000000B9
-:1057F000000000000000000007E107EF00000000CB
-:105800000000000000000000000000000000000098
-:105810000000000000000000000000000000000088
-:105820000000000007EF082C00000000000000004E
-:10583000082C08350835083E083E08470847085038
-:1058400008500859085908620862086B086B087408
-:10585000087408D508D508EA08EA08FF08FF090215
-:1058600009020905090509080908090B090B090EB0
-:10587000090E09110911091409140917091709203A
-:105880000000000000000000000000000000000018
-:105890000000000000000000000000000000000008
-:1058A00000000000000000000920092600000000A0
-:1058B00000000000000000000000000000000000E8
-:1058C00000000000000000000000000000000000D8
-:1058D000000000000926092B000000000000000065
-:1058E00000000000000000000000000000000000B8
-:1058F00000000000000000000000000000000000A8
-:10590000092B0933000000000000000009330934AE
-:10591000093409350935093609360937093709388F
-:10592000093809390939093A093A093B00000000E8
-:105930000000000000000000000000000000000067
-:105940000000000000000000000000000000000057
-:105950000000000000000000093B09AC000000004E
-:105960000000000009AC09AD09AD09AE09AE09AFF0
-:1059700009AF09B009B009B109B109B209B209B357
-:1059800009B309B409B409C809C809DB09DB09EF7F
-:1059900009EF09F009F009F109F109F209F209F337
-:1059A00009F309F409F409F509F509F609F609F707
-:1059B00009F70A1600000000000000000A160A1984
-:1059C0000A190A1C0A1C0A1F0A1F0A220A220A258F
-:1059D0000A250A280A280A2B0A2B0A2E0A2E0A3020
-:1059E00000000000000000000A300A330A330A36C3
-:1059F0000A360A390A390A3C0A3C0A3F0A3F0A4277
-:105A00000A420A450A450A480A480A4900000000B5
-:105A10000000000000000000000000000000000086
-:105A20000000000000000000000000000000000076
-:105A3000000000000A490A610000000000000000A8
-:105A40000000000000000000000000000000000056
-:105A50000000000000000000000000000000000046
-:105A60000A610A620000000000000000000000005F
-:105A70000000000000000000000000000000000026
-:105A80000000000000000000000000000000000016
-:105A9000000100000002070000030E0000041500D2
-:105AA00000051C000006230000072A000008310042
-:105AB00000093800000A3F00000B4600000C4D00B2
-:105AC000000D5400000E5B00000F62000010690022
-:105AD000001170000012770000137E000014850092
-:105AE00000158C000016930000179A000018A10002
-:105AF0000019A800001AAF00001BB600001CBD0072
-:105B0000001DC400001ECB00001FD2000000D90001
-:105B10000000200000004000000060000000800045
-:105B20000000A0000000C0000000E0000001000034
-:105B30000001200000014000000160000001800021
-:105B40000001A0000001C0000001E0000002000010
-:105B500000022000000240000002600000028000FD
-:105B60000002A0000002C0000002E00000030000EC
-:105B700000032000000340000003600000038000D9
-:105B80000003A0000003C0000003E00000040000C8
-:105B900000042000000440000004600000048000B5
-:105BA0000004A0000004C0000004E00000050000A4
-:105BB0000005200000054000000560000005800091
-:105BC0000005A0000005C0000005E0000006000080
-:105BD000000620000006400000066000000680006D
-:105BE0000006A0000006C0000006E000000700005C
-:105BF0000007200000074000000760000007800049
-:105C00000007A0000007C0000007E0000008000037
-:105C10000008200000084000000860000008800024
-:105C20000008A0000008C0000008E0000009000013
-:105C30000009200000094000000960000009800000
-:105C40000009A0000009C0000009E000000A0000EF
-:105C5000000A2000000A4000000A6000000A8000DC
-:105C6000000AA000000AC000000AE000000B0000CB
-:105C7000000B2000000B4000000B6000000B8000B8
-:105C8000000BA000000BC000000BE000000C0000A7
-:105C9000000C2000000C4000000C6000000C800094
-:105CA000000CA000000CC000000CE000000D000083
-:105CB000000D2000000D4000000D6000000D800070
-:105CC000000DA000000DC000000DE000000E00005F
-:105CD000000E2000000E4000000E6000000E80004C
-:105CE000000EA000000EC000000EE000000F00003B
-:105CF000000F2000000F4000000F6000000F800028
-:105D0000000FA000000FC000000FE0000010000016
-:105D10000010200000104000001060000010800003
-:105D20000010A0000010C0000010E00000110000F2
-:105D300000112000001140000011600000118000DF
-:105D40000011A0000011C0000011E00000120000CE
-:105D500000122000001240000012600000128000BB
-:105D60000012A0000012C0000012E00000130000AA
-:105D70000013200000134000001360000013800097
-:105D80000013A0000013C0000013E0000014000086
-:105D90000014200000144000001460000014800073
-:105DA0000014A0000014C0000014E0000015000062
-:105DB000001520000015400000156000001580004F
-:105DC0000015A0000015C0000015E000001600003E
-:105DD000001620000016400000166000001680002B
-:105DE0000016A0000016C0000016E000001700001A
-:105DF0000017200000174000001760000017800007
-:105E00000017A0000017C0000017E00000180000F5
-:105E100000182000001840000018600000188000E2
-:105E20000018A0000018C0000018E00000190000D1
-:105E300000192000001940000019600000198000BE
-:105E40000019A0000019C0000019E000001A0000AD
-:105E5000001A2000001A4000001A6000001A80009A
-:105E6000001AA000001AC000001AE000001B000089
-:105E7000001B2000001B4000001B6000001B800076
-:105E8000001BA000001BC000001BE000001C000065
-:105E9000001C2000001C4000001C6000001C800052
-:105EA000001CA000001CC000001CE000001D000041
-:105EB000001D2000001D4000001D6000001D80002E
-:105EC000001DA000001DC000001DE000001E00001D
-:105ED000001E2000001E4000001E6000001E80000A
-:105EE000001EA000001EC000001EE000001F0000F9
-:105EF000001F2000001F4000001F6000001F8000E6
-:105F0000001FA000001FC000001FE00000200000D4
-:105F100000202000002040000020600000208000C1
-:105F20000020A0000020C0000020E00000210000B0
-:105F3000002120000021400000216000002180009D
-:105F40000021A0000021C0000021E000002200008C
-:105F50000022200000224000002260000022800079
-:105F60000022A0000022C0000022E0000023000068
-:105F70000023200000234000002360000023800055
-:105F80000023A0000023C0000023E0000024000044
-:105F90000024200000244000002460000024800031
-:105FA0000024A0000024C0000024E0000025000020
-:105FB000002520000025400000256000002580000D
-:105FC0000025A0000025C0000025E00000260000FC
-:105FD00000262000002640000026600000268000E9
-:105FE0000026A0000026C0000026E00000270000D8
-:105FF00000272000002740000027600000278000C5
-:106000000027A0000027C0000027E00000280000B3
-:1060100000282000002840000028600000288000A0
-:106020000028A0000028C0000028E000002900008F
-:10603000002920000029400000296000002980007C
-:106040000029A0000029C0000029E000002A00006B
-:10605000002A2000002A4000002A6000002A800058
-:10606000002AA000002AC000002AE000002B000047
-:10607000002B2000002B4000002B6000002B800034
-:10608000002BA000002BC000002BE000002C000023
-:10609000002C2000002C4000002C6000002C800010
-:1060A000002CA000002CC000002CE000002D0000FF
-:1060B000002D2000002D4000002D6000002D8000EC
-:1060C000002DA000002DC000002DE000002E0000DB
-:1060D000002E2000002E4000002E6000002E8000C8
-:1060E000002EA000002EC000002EE000002F0000B7
-:1060F000002F2000002F4000002F6000002F8000A4
-:10610000002FA000002FC000002FE0000030000092
-:10611000003020000030400000306000003080007F
-:106120000030A0000030C0000030E000003100006E
-:10613000003120000031400000316000003180005B
-:106140000031A0000031C0000031E000003200004A
-:106150000032200000324000003260000032800037
-:106160000032A0000032C0000032E0000033000026
-:106170000033200000334000003360000033800013
-:106180000033A0000033C0000033E0000034000002
-:1061900000342000003440000034600000348000EF
-:1061A0000034A0000034C0000034E00000350000DE
-:1061B00000352000003540000035600000358000CB
-:1061C0000035A0000035C0000035E00000360000BA
-:1061D00000362000003640000036600000368000A7
-:1061E0000036A0000036C0000036E0000037000096
-:1061F0000037200000374000003760000037800083
-:106200000037A0000037C0000037E0000038000071
-:10621000003820000038400000386000003880005E
-:106220000038A0000038C0000038E000003900004D
-:10623000003920000039400000396000003980003A
-:106240000039A0000039C0000039E000003A000029
-:10625000003A2000003A4000003A6000003A800016
-:10626000003AA000003AC000003AE000003B000005
-:10627000003B2000003B4000003B6000003B8000F2
-:10628000003BA000003BC000003BE000003C0000E1
-:10629000003C2000003C4000003C6000003C8000CE
-:1062A000003CA000003CC000003CE000003D0000BD
-:1062B000003D2000003D4000003D6000003D8000AA
-:1062C000003DA000003DC000003DE000003E000099
-:1062D000003E2000003E4000003E6000003E800086
-:1062E000003EA000003EC000003EE000003F000075
-:1062F000003F2000003F4000003F6000003F800062
-:10630000003FA000003FC000003FE000003FE00170
-:1063100000000000000001FF0000020000007FF804
-:1063200000007FF800000A90000035000000000126
-:106330000000FF00000000000000FF00000000005F
-:106340000000FF00000000000000FF00000000004F
-:106350000000FF00000000000000FF00000000003F
-:106360000000FF00000000000000FF00000000002F
-:106370000000FF00000000000000FF00000000001F
-:106380000000FF00000000000000FF00000000000F
-:106390000000FF00000000000000FF0000000000FF
-:1063A0000000FF00000000000000FF0000000000EF
-:1063B0000000FF00000000000000FF0000000000DF
-:1063C0000000FF00000000000000FF0000000000CF
-:1063D0000000FF00000000000000FF0000000000BF
-:1063E0000000FF00000000000000FF0000000000AF
-:1063F0000000FF00000000000000FF00000000009F
-:106400000000FF00000000000000FF00000000008E
-:106410000000FF00000000000000FF00000000007E
-:106420000000FF00000000000000FF00000000006E
-:106430000000FF00000000000000FF00000000005E
-:106440000000FF00000000000000FF00000000004E
-:106450000000FF00000000000000FF00000000003E
-:106460000000FF00000000000000FF00000000002E
-:106470000000FF00000000000000FF00000000001E
-:106480000000FF00000000000000FF00000000000E
-:106490000000FF00000000000000FF0000000000FE
-:1064A0000000FF00000000000000FF0000000000EE
-:1064B0000000FF00000000000000FF0000000000DE
-:1064C0000000FF00000000000000FF0000000000CE
-:1064D0000000FF00000000000000FF0000000000BE
-:1064E0000000FF00000000000000FF0000000000AE
-:1064F0000000FF00000000000000FF00000000009E
-:106500000000FF00000000000000FF00000000008D
-:106510000000FF00000000000000FF00000000007D
-:106520000000FF00000000000000FF00000000006D
-:106530000000FF00000000000000FF00000000005D
-:106540000000FF00000000000000FF00000000004D
-:106550000000FF00000000000000FF00000000003D
-:106560000000FF00000000000000FF00000000002D
-:1065700000000000140AFF000000000100000000FD
-:106580000020100100000000010090000000010048
-:1065900000009002000090040000900600009008A7
-:1065A0000000900A0000900C0000900E0000901077
-:1065B0000000901200009014000090160000901847
-:1065C0000000901A0000901C0000901E0000902017
-:1065D00000009022000090240000902600009028E7
-:1065E0000000902A0000902C0000902E00009030B7
-:1065F0000000903200009034000090360000903887
-:106600000000903A0000903C0000903E0000904056
-:106610000000904200009044000090460000904826
-:106620000000904A0000904C0000904E00009050F6
-:1066300000009052000090540000905600009058C6
-:106640000000905A0000905C0000905E0000906096
-:106650000000906200009064000090660000906866
-:106660000000906A0000906C0000906E0000907036
-:106670000000907200009074000090760000907806
-:106680000000907A0000907C0000907E00009080D6
-:1066900000009082000090840000908600009088A6
-:1066A0000000908A0000908C0000908E0000909076
-:1066B0000000909200009094000090960000909846
-:1066C0000000909A0000909C0000909E000090A016
-:1066D000000090A2000090A4000090A6000090A8E6
-:1066E000000090AA000090AC000090AE000090B0B6
-:1066F000000090B2000090B4000090B6000090B886
-:10670000000090BA000090BC000090BE000090C055
-:10671000000090C2000090C4000090C6000090C825
-:10672000000090CA000090CC000090CE000090D0F5
-:10673000000090D2000090D4000090D6000090D8C5
-:10674000000090DA000090DC000090DE000090E095
-:10675000000090E2000090E4000090E6000090E865
-:10676000000090EA000090EC000090EE000090F035
-:10677000000090F2000090F4000090F6000090F805
-:10678000000090FA000090FC000090FE00009100D4
-:1067900000009102000091040000910600009108A1
-:1067A0000000910A0000910C0000910E0000911071
-:1067B0000000911200009114000091160000911841
-:1067C0000000911A0000911C0000911E0000912011
-:1067D00000009122000091240000912600009128E1
-:1067E0000000912A0000912C0000912E00009130B1
-:1067F0000000913200009134000091360000913881
-:106800000000913A0000913C0000913E0000914050
-:106810000000914200009144000091460000914820
-:106820000000914A0000914C0000914E00009150F0
-:1068300000009152000091540000915600009158C0
-:106840000000915A0000915C0000915E0000916090
-:106850000000916200009164000091660000916860
-:106860000000916A0000916C0000916E0000917030
-:106870000000917200009174000091760000917800
-:106880000000917A0000917C0000917E00009180D0
-:1068900000009182000091840000918600009188A0
-:1068A0000000918A0000918C0000918E0000919070
-:1068B0000000919200009194000091960000919840
-:1068C0000000919A0000919C0000919E000091A010
-:1068D000000091A2000091A4000091A6000091A8E0
-:1068E000000091AA000091AC000091AE000091B0B0
-:1068F000000091B2000091B4000091B6000091B880
-:10690000000091BA000091BC000091BE000091C04F
-:10691000000091C2000091C4000091C6000091C81F
-:10692000000091CA000091CC000091CE000091D0EF
-:10693000000091D2000091D4000091D6000091D8BF
-:10694000000091DA000091DC000091DE000091E08F
-:10695000000091E2000091E4000091E6000091E85F
-:10696000000091EA000091EC000091EE000091F02F
-:10697000000091F2000091F4000091F6000091F8FF
-:10698000000091FA000091FC000091FEFFFFFFFF64
-:10699000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
-:1069A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
-:1069B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
-:1069C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
-:1069D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
-:1069E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
-:1069F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
-:106A0000FFFFFFFFFFFFFFFFFFFFFFFF000000038F
-:106A100000BEBC20000000000000000500000003D4
-:106A200000BEBC20000000000000000500000003C4
-:106A300000BEBC20000000000000000500000003B4
-:106A400000BEBC20000000000000000500000003A4
-:106A500000BEBC2000000000000000050000000394
-:106A600000BEBC2000000000000000050000000384
-:106A700000BEBC2000000000000000050000000374
-:106A800000BEBC2000000000000000050000200047
-:106A9000000040C000006180000082400000A300B0
-:106AA0000000C3C00000E480000105400001260092
-:106AB000000146C000016780000188400001A90074
-:106AC0000001C9C00001EA8000020B4000022C0056
-:106AD00000024CC000026D8000028E400002AF0038
-:106AE0000002CFC00002F0800000114000008000D2
-:106AF000000103800001870000020A8000028E006E
-:106B000000031180000395000004188000049C001D
-:106B100000051F800005A300000626800006AA00CD
-:106B200000072D800007B100000834800008B8007D
-:106B300000093B800009BF00000A4280000AC6002D
-:106B4000000B4980000BCD00000C5080000CD400DD
-:106B5000000D578000005B0000007FF800007FF808
-:106B60000000022A000035000000FF0000000000C5
-:106B70000000FF00000000000000FF000000000017
-:106B80000000FF00000000000000FF000000000007
-:106B90000000FF00000000000000FF0000000000F7
-:106BA0000000FF00000000000000FF0000000000E7
-:106BB0000000FF00000000000000FF0000000000D7
-:106BC0000000FF00000000000000FF0000000000C7
-:106BD0000000FF00000000000000FF0000000000B7
-:106BE0000000FF00000000000000FF0000000000A7
-:106BF0000000FF00000000000000FF000000000097
-:106C00000000FF00000000000000FF000000000086
-:106C10000000FF00000000000000FF000000000076
-:106C20000000FF00000000000000FF000000000066
-:106C30000000FF00000000000000FF000000000056
-:106C40000000FF00000000000000FF000000000046
-:106C50000000FF00000000000000FF000000000036
-:106C60000000FF00000000000000FF000000000026
-:106C70000000FF00000000000000FF000000000016
-:106C80000000FF00000000000000FF000000000006
-:106C90000000FF00000000000000FF0000000000F6
-:106CA0000000FF00000000000000FF0000000000E6
-:106CB0000000FF00000000000000FF0000000000D6
-:106CC0000000FF00000000000000FF0000000000C6
-:106CD0000000FF00000000000000FF0000000000B6
-:106CE0000000FF00000000000000FF0000000000A6
-:106CF0000000FF00000000000000FF000000000096
-:106D00000000FF00000000000000FF000000000085
-:106D10000000FF00000000000000FF000000000075
-:106D20000000FF00000000000000FF000000000065
-:106D30000000FF00000000000000FF000000000055
-:106D40000000FF00000000000000FF000000000045
-:106D50000000FF00000000000000FF000000000035
-:106D60000000FF00000000000000FF000000000025
-:106D70000000FF00000000000000FF000000000015
-:106D80000000FF00000000000000FF000000000005
-:106D90000000FF00000000000000FF0000000000F5
-:106DA0000000FF00000019000000000000000000CB
-:106DB000FFFFFFFF000000000393870000000000BA
-:106DC0000393870000007FF800007FF800000BA30A
-:106DD00000001500000000FF000000FF000000FFA1
-:106DE000000000FF000000FF000000FF000000FFA7
-:106DF000000000FF0000FF00000000000000FF0096
-:106E0000000000000000FF00000000000000FF0084
-:106E1000000000000000FF00000000000000FF0074
-:106E2000000000000000FF00000000000000FF0064
-:106E3000000000000000FF00000000000000FF0054
-:106E4000000000000000FF00000000000000FF0044
-:106E5000000000000000FF00000000000000FF0034
-:106E6000000000000000FF00000000000000FF0024
-:106E7000000000000000FF00000000000000FF0014
-:106E8000000000000000FF00000000000000FF0004
-:106E9000000000000000FF00000000000000FF00F4
-:106EA000000000000000FF00000000000000FF00E4
-:106EB000000000000000FF00000000000000FF00D4
-:106EC000000000000000FF00000000000000FF00C4
-:106ED000000000000000FF00000000000000FF00B4
-:106EE000000000000000FF00000000000000FF00A4
-:106EF000000000000000FF00000000000000FF0094
-:106F0000000000000000FF00000000000000FF0083
-:106F1000000000000000FF00000000000000FF0073
-:106F2000000000000000FF00000000000000FF0063
-:106F3000000000000000FF00000000000000FF0053
-:106F4000000000000000FF00000000000000FF0043
-:106F5000000000000000FF00000000000000FF0033
-:106F6000000000000000FF00000000000000FF0023
-:106F7000000000000000FF00000000000000FF0013
-:106F8000000000000000FF00000000000000FF0003
-:106F9000000000000000FF00000000000000FF00F3
-:106FA000000000000000FF00000000000000FF00E3
-:106FB000000000000000FF00000000000000FF00D3
-:106FC000000000000000FF00000000000000FF00C3
-:106FD000000000000000FF00000000000000FF00B3
-:106FE000000000000000FF00000000000000FF00A3
-:106FF000000000000000FF00000000000000FF0093
-:10700000000000000000FF00000000000000FF0082
-:10701000000000000000FF00000000000000FF0072
-:10702000000000000000FF00000000000000FF0062
-:1070300000000000FFFFFFFFFFFFFFFFFFFFFFFF5C
-:10704000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
-:10705000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
-:10706000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
-:10707000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
-:10708000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
-:10709000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
-:1070A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0
-:1070B000FFFFFFFF00000000000028AD00002918BE
-:1070C0000000291900000005000000070000FF0073
-:1070D0000FFFFFFF0000FF000FFFFFFF000000FF9A
-:1070E0000000FF000000FF000FFFFFFF0000FF0097
-:1070F0000FFFFFFF000000FF0000FF000000FF0087
-:107100000FFFFFFF0000FF000FFFFFFF000000FF69
-:107110000000FF000000FF000FFFFFFF0000FF0066
-:107120000FFFFFFF000000FF0000FF000000FF0056
-:107130000FFFFFFF0000FF000FFFFFFF000000FF39
-:107140000000FF000000FF000FFFFFFF0000FF0036
-:107150000FFFFFFF000000FF0000FF000000FF0026
-:107160000FFFFFFF0000FF000FFFFFFF000000FF09
-:107170000000FF000000FF000FFFFFFF0000FF0006
-:107180000FFFFFFF000000FF0000FF000000FF00F6
-:107190000FFFFFFF0000FF000FFFFFFF000000FFD9
-:1071A0000000FF000000FF000FFFFFFF0000FF00D6
-:1071B0000FFFFFFF000000FF0000FF000000FF00C6
-:1071C0000FFFFFFF0000FF000FFFFFFF000000FFA9
-:1071D0000000FF000000FF000FFFFFFF0000FF00A6
-:1071E0000FFFFFFF000000FF0000FF000000FF0096
-:1071F0000FFFFFFF0000FF000FFFFFFF000000FF79
-:107200000000FF000000FF000FFFFFFF0000FF0075
-:107210000FFFFFFF000000FF0000FF000000FF0065
-:107220000FFFFFFF0000FF000FFFFFFF000000FF48
-:107230000000FF000000FF000FFFFFFF0000FF0045
-:107240000FFFFFFF000000FF0000FF000000FF0035
-:107250000FFFFFFF0000FF000FFFFFFF000000FF18
-:107260000000FF000000FF000FFFFFFF0000FF0015
-:107270000FFFFFFF000000FF0000FF000000FF0005
-:107280000FFFFFFF0000FF000FFFFFFF000000FFE8
-:107290000000FF000000FF000FFFFFFF0000FF00E5
-:1072A0000FFFFFFF000000FF0000FF000000FF00D5
-:1072B0000FFFFFFF0000FF000FFFFFFF000000FFB8
-:1072C0000000FF000000FF000FFFFFFF0000FF00B5
-:1072D0000FFFFFFF000000FF0000FF000000FF00A5
-:1072E0000FFFFFFF0000FF000FFFFFFF000000FF88
-:1072F0000000FF000000FF000FFFFFFF0000FF0085
-:107300000FFFFFFF000000FF0000FF000000FF0074
-:107310000FFFFFFF0000FF000FFFFFFF000000FF57
-:107320000000FF000000FF000FFFFFFF0000FF0054
-:107330000FFFFFFF000000FF0000FF000000FF0044
-:107340000FFFFFFF0000FF000FFFFFFF000000FF27
-:107350000000FF000000FF000FFFFFFF0000FF0024
-:107360000FFFFFFF000000FF0000FF000000FF0014
-:107370000FFFFFFF0000FF000FFFFFFF000000FFF7
-:107380000000FF000000FF000FFFFFFF0000FF00F4
-:107390000FFFFFFF000000FF0000FF000000FF00E4
-:1073A0000FFFFFFF0000FF000FFFFFFF000000FFC7
-:1073B0000000FF000000FF000FFFFFFF0000FF00C4
-:1073C0000FFFFFFF000000FF0000FF000000FF00B4
-:1073D0000FFFFFFF0000FF000FFFFFFF000000FF97
-:1073E0000000FF000000FF000FFFFFFF0000FF0094
-:1073F0000FFFFFFF000000FF0000FF000000FF0084
-:107400000FFFFFFF0000FF000FFFFFFF000000FF66
-:107410000000FF000000FF000FFFFFFF0000FF0063
-:107420000FFFFFFF000000FF0000FF000000FF0053
-:107430000FFFFFFF0000FF000FFFFFFF000000FF36
-:107440000000FF000000FF000FFFFFFF0000FF0033
-:107450000FFFFFFF000000FF0000FF000000FF0023
-:107460000FFFFFFF0000FF000FFFFFFF000000FF06
-:107470000000FF000000FF000FFFFFFF0000FF0003
-:107480000FFFFFFF000000FF0000FF000000FF00F3
-:107490000FFFFFFF0000FF000FFFFFFF000000FFD6
-:1074A0000000FF000000FF000FFFFFFF0000FF00D3
-:1074B0000FFFFFFF000000FF0000FF000000FF00C3
-:1074C0000FFFFFFF0000FF000FFFFFFF000000FFA6
-:1074D0000000FF000000FF000FFFFFFF0000FF00A3
-:1074E0000FFFFFFF000000FF0000FF000000FF0093
-:1074F0000FFFFFFF0000FF000FFFFFFF000000FF76
-:107500000000FF000000FF000FFFFFFF0000FF0072
-:107510000FFFFFFF000000FF0000FF000000FF0062
-:107520000FFFFFFF0000FF000FFFFFFF000000FF45
-:107530000000FF000000FF000FFFFFFF0000FF0042
-:107540000FFFFFFF000000FF0000FF000000FF0032
-:107550000FFFFFFF0000FF000FFFFFFF000000FF15
-:107560000000FF000000FF000FFFFFFF0000FF0012
-:107570000FFFFFFF000000FF0000FF000000FF0002
-:107580000FFFFFFF0000FF000FFFFFFF000000FFE5
-:107590000000FF000000FF000FFFFFFF0000FF00E2
-:1075A0000FFFFFFF000000FF0000FF000000FF00D2
-:1075B0000FFFFFFF0000FF000FFFFFFF000000FFB5
-:1075C0000000FF000000FF000FFFFFFF0000FF00B2
-:1075D0000FFFFFFF000000FF0000FF000000FF00A2
-:1075E0000FFFFFFF0000FF000FFFFFFF000000FF85
-:1075F0000000FF000000FF000FFFFFFF0000FF0082
-:107600000FFFFFFF000000FF0000FF000000FF0071
-:107610000FFFFFFF0000FF000FFFFFFF000000FF54
-:107620000000FF000000FF000FFFFFFF0000FF0051
-:107630000FFFFFFF000000FF0000FF000000FF0041
-:107640000FFFFFFF0000FF000FFFFFFF000000FF24
-:107650000000FF000000FF000FFFFFFF0000FF0021
-:107660000FFFFFFF000000FF0000FF000000FF0011
-:107670000FFFFFFF0000FF000FFFFFFF000000FFF4
-:107680000000FF000000FF000FFFFFFF0000FF00F1
-:107690000FFFFFFF000000FF0000FF000000FF00E1
-:1076A0000FFFFFFF0000FF000FFFFFFF000000FFC4
-:1076B0000000FF000000FF000FFFFFFF0000FF00C1
-:1076C0000FFFFFFF000000FF0000FF000000FF00B1
-:1076D0000FFFFFFF0000FF000FFFFFFF000000FF94
-:1076E0000000FF000000FF000FFFFFFF0000FF0091
-:1076F0000FFFFFFF000000FF0000FF000000FF0081
-:107700000FFFFFFF0000FF000FFFFFFF000000FF63
-:107710000000FF000000FF000FFFFFFF0000FF0060
-:107720000FFFFFFF000000FF0000FF000000FF0050
-:107730000FFFFFFF0000FF000FFFFFFF000000FF33
-:107740000000FF000000FF000FFFFFFF0000FF0030
-:107750000FFFFFFF000000FF0000FF000000FF0020
-:107760000FFFFFFF0000FF000FFFFFFF000000FF03
-:107770000000FF000000FF000FFFFFFF0000FF0000
-:107780000FFFFFFF000000FF0000FF000000FF00F0
-:107790000FFFFFFF0000FF000FFFFFFF000000FFD3
-:1077A0000000FF000000FF000FFFFFFF0000FF00D0
-:1077B0000FFFFFFF000000FF0000FF000000FF00C0
-:1077C0000FFFFFFF0000FF000FFFFFFF000000FFA3
-:1077D0000000FF000000FF000FFFFFFF0000FF00A0
-:1077E0000FFFFFFF000000FF0000FF000000FF0090
-:1077F0000FFFFFFF0000FF000FFFFFFF000000FF73
-:107800000000FF000000FF000FFFFFFF0000FF006F
-:107810000FFFFFFF000000FF0000FF000000FF005F
-:107820000FFFFFFF0000FF000FFFFFFF000000FF42
-:107830000000FF000000FF000FFFFFFF0000FF003F
-:107840000FFFFFFF000000FF0000FF000000FF002F
-:107850000FFFFFFF0000FF000FFFFFFF000000FF12
-:107860000000FF000000FF000FFFFFFF0000FF000F
-:107870000FFFFFFF000000FF0000FF000000FF00FF
-:107880000FFFFFFF0000FF000FFFFFFF000000FFE2
-:107890000000FF000000FF000FFFFFFF0000FF00DF
-:1078A0000FFFFFFF000000FF0000FF000000FF00CF
-:1078B0000FFFFFFF0000FF000FFFFFFF000000FFB2
-:1078C0000000FF000000FF000FFFFFFF0000FF00AF
-:1078D0000FFFFFFF000000FF0000FF000000FF009F
-:1078E0000FFFFFFF0000FF000FFFFFFF000000FF82
-:1078F0000000FF000000FF000FFFFFFF0000FF007F
-:107900000FFFFFFF000000FF0000FF000000FF006E
-:107910000FFFFFFF0000FF000FFFFFFF000000FF51
-:107920000000FF000000FF000FFFFFFF0000FF004E
-:107930000FFFFFFF000000FF0000FF000000FF003E
-:107940000FFFFFFF0000FF000FFFFFFF000000FF21
-:107950000000FF000000FF000FFFFFFF0000FF001E
-:107960000FFFFFFF000000FF0000FF000000FF000E
-:107970000FFFFFFF0000FF000FFFFFFF000000FFF1
-:107980000000FF000000FF000FFFFFFF0000FF00EE
-:107990000FFFFFFF000000FF0000FF000000FF00DE
-:1079A0000FFFFFFF0000FF000FFFFFFF000000FFC1
-:1079B0000000FF000000FF000FFFFFFF0000FF00BE
-:1079C0000FFFFFFF000000FF0000FF000000FF00AE
-:1079D0000FFFFFFF0000FF000FFFFFFF000000FF91
-:1079E0000000FF000000FF000FFFFFFF0000FF008E
-:1079F0000FFFFFFF000000FF0000FF000000FF007E
-:107A00000FFFFFFF0000FF000FFFFFFF000000FF60
-:107A10000000FF000000FF000FFFFFFF0000FF005D
-:107A20000FFFFFFF000000FF0000FF000000FF004D
-:107A30000FFFFFFF0000FF000FFFFFFF000000FF30
-:107A40000000FF000000FF000FFFFFFF0000FF002D
-:107A50000FFFFFFF000000FF0000FF000000FF001D
-:107A60000FFFFFFF0000FF000FFFFFFF000000FF00
-:107A70000000FF000000FF000FFFFFFF0000FF00FD
-:107A80000FFFFFFF000000FF0000FF000000FF00ED
-:107A90000FFFFFFF0000FF000FFFFFFF000000FFD0
-:107AA0000000FF000000FF000FFFFFFF0000FF00CD
-:107AB0000FFFFFFF000000FF0000FF000000FF00BD
-:107AC0000FFFFFFF0000FF000FFFFFFF000000FFA0
-:107AD0000000FF000000FF000FFFFFFF0000FF009D
-:107AE0000FFFFFFF000000FF0000FF000000FF008D
-:107AF0000FFFFFFF0000FF000FFFFFFF000000FF70
-:107B00000000FF000000FF000FFFFFFF0000FF006C
-:107B10000FFFFFFF000000FF0000FF000000FF005C
-:107B20000FFFFFFF0000FF000FFFFFFF000000FF3F
-:107B30000000FF000000FF000FFFFFFF0000FF003C
-:107B40000FFFFFFF000000FF0000FF000000FF002C
-:107B50000FFFFFFF0000FF000FFFFFFF000000FF0F
-:107B60000000FF000000FF000FFFFFFF0000FF000C
-:107B70000FFFFFFF000000FF0000FF000000FF00FC
-:107B80000FFFFFFF0000FF000FFFFFFF000000FFDF
-:107B90000000FF000000FF000FFFFFFF0000FF00DC
-:107BA0000FFFFFFF000000FF0000FF000000FF00CC
-:107BB0000FFFFFFF0000FF000FFFFFFF000000FFAF
-:107BC0000000FF000000FF000FFFFFFF0000FF00AC
-:107BD0000FFFFFFF000000FF0000FF000000FF009C
-:107BE0000FFFFFFF0000FF000FFFFFFF000000FF7F
-:107BF0000000FF000000FF000FFFFFFF0000FF007C
-:107C00000FFFFFFF000000FF0000FF000000FF006B
-:107C10000FFFFFFF0000FF000FFFFFFF000000FF4E
-:107C20000000FF000000FF000FFFFFFF0000FF004B
-:107C30000FFFFFFF000000FF0000FF000000FF003B
-:107C40000FFFFFFF0000FF000FFFFFFF000000FF1E
-:107C50000000FF000000FF000FFFFFFF0000FF001B
-:107C60000FFFFFFF000000FF0000FF000000FF000B
-:107C70000FFFFFFF0000FF000FFFFFFF000000FFEE
-:107C80000000FF000000FF000FFFFFFF0000FF00EB
-:107C90000FFFFFFF000000FF0000FF000000FF00DB
-:107CA0000FFFFFFF0000FF000FFFFFFF000000FFBE
-:107CB0000000FF000000FF000FFFFFFF0000FF00BB
-:107CC0000FFFFFFF000000FF0000FF000000FF00AB
-:107CD0000FFFFFFF0000FF000FFFFFFF000000FF8E
-:107CE0000000FF000000FF000FFFFFFF0000FF008B
-:107CF0000FFFFFFF000000FF0000FF000000FF007B
-:107D00000FFFFFFF0000FF000FFFFFFF000000FF5D
-:107D10000000FF000000FF000FFFFFFF0000FF005A
-:107D20000FFFFFFF000000FF0000FF000000FF004A
-:107D30000FFFFFFF0000FF000FFFFFFF000000FF2D
-:107D40000000FF000000FF000FFFFFFF0000FF002A
-:107D50000FFFFFFF000000FF0000FF000000FF001A
-:107D60000FFFFFFF0000FF000FFFFFFF000000FFFD
-:107D70000000FF000000FF000FFFFFFF0000FF00FA
-:107D80000FFFFFFF000000FF0000FF0000001000D9
-:107D900000002080000031000000418000005200FF
-:107DA00000006280000073000000838000009400E7
-:107DB0000000A4800000B5000000C5800000D600CF
-:107DC0000000E6800000F7000001078000011800B5
-:107DD00000012880000139000001498000015A009B
-:107DE00000016A8000017B0000018B8000019C0083
-:107DF0000001AC800001BD000001CD800001DE006B
-:107E00000001EE800001FF0000000F8000007FF8FD
-:107E100000007FF8000005F60000350010000000AB
-:107E2000000028AD000029180000291900000005F5
-:107E3000000000060001000100050206CCCCCCC900
-:107E40007058103C0000FF00000000000000FF0020
-:107E5000000000000000FF00000000000000FF0024
-:107E6000000000000000FF00000000000000FF0014
-:107E7000000000000000FF00000000000000FF0004
-:107E8000000000000000FF00000000000000FF00F4
-:107E9000000000000000FF00000000000000FF00E4
-:107EA000000000000000FF00000000000000FF00D4
-:107EB000000000000000FF00000000000000FF00C4
-:107EC000000000000000FF00000000000000FF00B4
-:107ED000000000000000FF00000000000000FF00A4
-:107EE000000000000000FF00000000000000FF0094
-:107EF000000000000000FF00000000000000FF0084
-:107F0000000000000000FF00000000000000FF0073
-:107F1000000000000000FF00000000000000FF0063
-:107F2000000000000000FF00000000000000FF0053
-:107F3000000000000000FF00000000000000FF0043
-:107F4000000000000000FF00000000000000FF0033
-:107F5000000000000000FF00000000000000FF0023
-:107F6000000000000000FF00000000000000FF0013
-:107F7000000000000000FF00000000000000FF0003
-:107F8000000000000000FF00000000000000FF00F3
-:107F9000000000000000FF00000000000000FF00E3
-:107FA000000000000000FF00000000000000FF00D3
-:107FB000000000000000FF00000000000000FF00C3
-:107FC000000000000000FF00000000000000FF00B3
-:107FD000000000000000FF00000000000000FF00A3
-:107FE000000000000000FF00000000000000FF0093
-:107FF000000000000000FF00000000000000FF0083
-:10800000000000000000FF00000000000000FF0072
-:10801000000000000000FF00000000000000FF0062
-:10802000000000000000FF00000000000000FF0052
-:10803000000000000000FF00000000000000FF0042
-:10804000000000000000FF00000000000000FF0032
-:10805000000000000000FF00000000000000FF0022
-:10806000000000000000FF00000000000000FF0012
-:10807000000000000000FF00000000000000FF0002
-:108080000000000000000001CCCC0201CCCCCCCC24
-:10809000CCCC0201CCCCCCCCCCCC0201CCCCCCCC4A
-:1080A000CCCC0201CCCCCCCCCCCC0201CCCCCCCC3A
-:1080B000CCCC0201CCCCCCCCCCCC0201CCCCCCCC2A
-:1080C000CCCC0201CCCCCCCC00000000FFFFFFFFE9
-:1080D000030303031342020250505020706080508B
-:1080E0000200020006040604000E0000011600D67D
-:1080F000002625A0002625A0002625A0002625A0D4
-:1081000000720000012300F3002625A0002625A010
-:10811000002625A0002625A00000FFFF000000008B
-:108120000000FFFF000000000000FFFF0000000053
-:108130000000FFFF000000000000FFFF0000000043
-:108140000000FFFF000000000000FFFF0000000033
-:108150000000FFFF000000000000FFFF0000000023
-:108160000000FFFF000000000000FFFF0000000013
-:108170000000FFFF000000000000FFFF0000000003
-:108180000000FFFF000000000000FFFF00000000F3
-:108190000000FFFF000000000000FFFF00000000E3
-:1081A0000000FFFF000000000000FFFF00000000D3
-:1081B0000000FFFF000000000000FFFF00000000C3
-:1081C0000000FFFF000000000000FFFF00000000B3
-:1081D0000000FFFF000000000000FFFF00000000A3
-:1081E0000000FFFF000000000000FFFF0000000093
-:1081F0000000FFFF000000000000FFFF0000000083
-:108200000000FFFF000000000000FFFF0000000072
-:108210000000FFFF000000000000FFFF0000000062
-:108220000000FFFF000000000000FFFF0000000052
-:108230000000FFFF000000000000FFFF0000000042
-:108240000000FFFF000000000000FFFF0000000032
-:108250000000FFFF000000000000FFFF0000000022
-:108260000000FFFF000000000000FFFF0000000012
-:108270000000FFFF000000000000FFFF0000000002
-:108280000000FFFF000000000000FFFF00000000F2
-:108290000000FFFF000000000000FFFF00000000E2
-:1082A0000000FFFF000000000000FFFF00000000D2
-:1082B0000000FFFF000000000000FFFF00000000C2
-:1082C0000000FFFF000000000000FFFF00000000B2
-:1082D0000000FFFF000000000000FFFF00000000A2
-:1082E0000000FFFF000000000000FFFF0000000092
-:1082F0000000FFFF000000000000FFFF0000000082
-:108300000000FFFF000000000000FFFF0000000071
-:108310000000FFFF00000000FFFFFFF3318FFFFFB1
-:108320000C30C30CC30C30C3CF3CF300F3CF3CF391
-:108330000000CF3CCDCDCDCDFFFFFFF130EFFFFFF3
-:108340000C30C30CC30C30C3CF3CF300F3CF3CF371
-:108350000001CF3CCDCDCDCDFFFFFFF6305FFFFF5D
-:108360000C30C30CC30C30C3CF3CF300F3CF3CF351
-:108370000002CF3CCDCDCDCDFFFFF4061CBFFFFFEB
-:108380000C30C305C30C30C3CF300014F3CF3CF323
-:108390000004CF3CCDCDCDCDFFFFFFF2304FFFFF2E
-:1083A0000C30C30CC30C30C3CF3CF300F3CF3CF311
-:1083B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF22
-:1083C0000C30C30CC30C30C3CF3CF300F3CF3CF3F1
-:1083D0000010CF3CCDCDCDCDFFFFFFF731EFFFFF3C
-:1083E0000C30C30CC30C30C3CF3CF300F3CF3CF3D1
-:1083F0000020CF3CCDCDCDCDFFFFFFF5302FFFFFCF
-:108400000C30C30CC30C30C3CF3CF300F3CF3CF3B0
-:108410000040CF3CCDCDCDCDFFFFFFF3318FFFFF2F
-:108420000C30C30CC30C30C3CF3CF300F3CF3CF390
-:108430000000CF3CCDCDCDCDFFFFFFF1310FFFFFD1
-:108440000C30C30CC30C30C3CF3CF300F3CF3CF370
-:108450000001CF3CCDCDCDCDFFFFFFF6305FFFFF5C
-:108460000C30C30CC30C30C3CF3CF300F3CF3CF350
-:108470000002CF3CCDCDCDCDFFFFF4061CBFFFFFEA
-:108480000C30C305C30C30C3CF300014F3CF3CF322
-:108490000004CF3CCDCDCDCDFFFFFFF2304FFFFF2D
-:1084A0000C30C30CC30C30C3CF3CF300F3CF3CF310
-:1084B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF21
-:1084C0000C30C30CC30C30C3CF3CF300F3CF3CF3F0
-:1084D0000010CF3CCDCDCDCDFFFFFFF730EFFFFF3C
-:1084E0000C30C30CC30C30C3CF3CF300F3CF3CF3D0
-:1084F0000020CF3CCDCDCDCDFFFFFFF5304FFFFFAE
-:108500000C30C30CC30C30C3CF3CF300F3CF3CF3AF
-:108510000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE3
-:108520000C30C30CC30C30C3CF3CF3CCF3CF3CF3C3
-:108530000000CF3CCDCDCDCDFFFFFFFF30CFFFFF03
-:108540000C30C30CC30C30C3CF3CF3CCF3CF3CF3A3
-:108550000001CF3CCDCDCDCDFFFFFFFF30CFFFFFE2
-:108560000C30C30CC30C30C3CF3CF3CCF3CF3CF383
-:108570000002CF3CCDCDCDCDFFFFFFFF30CFFFFFC1
-:108580000C30C30CC30C30C3CF3CF3CCF3CF3CF363
-:108590000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9F
-:1085A0000C30C30CC30C30C3CF3CF3CCF3CF3CF343
-:1085B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF7B
-:1085C0000C30C30CC30C30C3CF3CF3CCF3CF3CF323
-:1085D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF53
-:1085E0000C30C30CC30C30C3CF3CF3CCF3CF3CF303
-:1085F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF23
-:108600000C30C30CC30C30C3CF3CF3CCF3CF3CF3E2
-:108610000040CF3CCDCDCDCDFFFFFFF3320FFFFFAC
-:108620000C30C30CC30C30C3CF3CF300F3CF3CF38E
-:108630000000CF3CCDCDCDCDFFFFFFF1310FFFFFCF
-:108640000C30C30CC30C30C3CF3CF300F3CF3CF36E
-:108650000001CF3CCDCDCDCDFFFFFFF6305FFFFF5A
-:108660000C30C30CC30C30C3CF3CF300F3CF3CF34E
-:108670000002CF3CCDCDCDCDFFFFF4061CBFFFFFE8
-:108680000C30C305C30C30C3CF300014F3CF3CF320
-:108690000004CF3CCDCDCDCDFFFFFFF2304FFFFF2B
-:1086A0000C30C30CC30C30C3CF3CF300F3CF3CF30E
-:1086B0000008CF3CCDCDCDCDFFFFFF8A042FFFFFBB
-:1086C0000C30C30CC30C30C3CF3CC000F3CF3CF321
-:1086D0000010CF3CCDCDCDCDFFFFFF9705CFFFFFE5
-:1086E0000C30C30CC30C30C3CF3CC000F3CF3CF301
-:1086F0000020CF3CCDCDCDCDFFFFFFF5310FFFFFEB
-:108700000C30C30CC30C30C3CF3CF300F3CF3CF3AD
-:108710000040CF3CCDCDCDCDFFFFFFF3320FFFFFAB
-:108720000C30C30CC30C30C3CF3CF300F3CF3CF38D
-:108730000000CF3CCDCDCDCDFFFFFFF1302FFFFFAF
-:108740000C30C30CC30C30C3CF3CF300F3CF3CF36D
-:108750000001CF3CCDCDCDCDFFFFFFF6305FFFFF59
-:108760000C30C30CC30C30C3CF3CF300F3CF3CF34D
-:108770000002CF3CCDCDCDCDFFFFFF061CBFFFFFDC
-:108780000C30C30CC30C30C3CF3CC014F3CF3CF34C
-:108790000004CF3CCDCDCDCDFFFFFFF2304FFFFF2A
-:1087A0000C30C30CC30C30C3CF3CF300F3CF3CF30D
-:1087B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF1E
-:1087C0000C30C30CC30C30C3CF3CF300F3CF3CF3ED
-:1087D0000010CF3CCDCDCDCDFFFFFFF731CFFFFF58
-:1087E0000C30C30CC30C30C3CF3CF300F3CF3CF3CD
-:1087F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF21
-:108800000C30C30CC30C30C3CF3CF3CCF3CF3CF3E0
-:108810000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE0
-:108820000C30C30CC30C30C3CF3CF3CCF3CF3CF3C0
-:108830000000CF3CCDCDCDCDFFFFFFFF30CFFFFF00
-:108840000C30C30CC30C30C3CF3CF3CCF3CF3CF3A0
-:108850000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
-:108860000C30C30CC30C30C3CF3CF3CCF3CF3CF380
-:108870000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBE
-:108880000C30C30CC30C30C3CF3CF3CCF3CF3CF360
-:108890000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9C
-:1088A0000C30C30CC30C30C3CF3CF3CCF3CF3CF340
-:1088B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF78
-:1088C0000C30C30CC30C30C3CF3CF3CCF3CF3CF320
-:1088D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF50
-:1088E0000C30C30CC30C30C3CF3CF3CCF3CF3CF300
-:1088F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF20
-:108900000C30C30CC30C30C3CF3CF3CCF3CF3CF3DF
-:108910000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
-:108920000C30C30CC30C30C3CF3CF3CCF3CF3CF3BF
-:108930000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFF
-:108940000C30C30CC30C30C3CF3CF3CCF3CF3CF39F
-:108950000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
-:108960000C30C30CC30C30C3CF3CF3CCF3CF3CF37F
-:108970000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBD
-:108980000C30C30CC30C30C3CF3CF3CCF3CF3CF35F
-:108990000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9B
-:1089A0000C30C30CC30C30C3CF3CF3CCF3CF3CF33F
-:1089B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF77
-:1089C0000C30C30CC30C30C3CF3CF3CCF3CF3CF31F
-:1089D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4F
-:1089E0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FF
-:1089F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1F
-:108A00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DE
-:108A10000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
-:108A20000C30C30CC30C30C3CF3CF3CCF3CF3CF3BE
-:108A30000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFE
-:108A40000C30C30CC30C30C3CF3CF3CCF3CF3CF39E
-:108A50000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDD
-:108A60000C30C30CC30C30C3CF3CF3CCF3CF3CF37E
-:108A70000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBC
-:108A80000C30C30CC30C30C3CF3CF3CCF3CF3CF35E
-:108A90000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9A
-:108AA0000C30C30CC30C30C3CF3CF3CCF3CF3CF33E
-:108AB0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF76
-:108AC0000C30C30CC30C30C3CF3CF3CCF3CF3CF31E
-:108AD0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4E
-:108AE0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FE
-:108AF0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1E
-:108B00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DD
-:108B10000040CF3CCDCDCDCD000C0000000700C003
-:108B200000028130000B8158000202100001023067
-:108B3000000F024000010330000C0000000800C0DC
-:108B400000028140000B8168000202200001024007
-:108B500000070250000202C00010000000080100DF
-:108B600000028180000B81A8000202600001828067
-:108B7000000E829800080380001000000001010030
-:108B80000002811000090138000201C8000101E85B
-:108B9000000E01F8000002D8CCCCCCCCCCCCCCCC94
-:108BA000CCCCCCCCCCCCCCCC00002000CCCCCCCC15
-:108BB000CCCCCCCCCCCCCCCCCCCCCCCC0000200005
-:108BC000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCE5
-:108BD00004002000CCCCCCCCCCCCCCCCCCCCCCCCE1
-:108BE000CCCCCCCC4100200003030303034202029F
-:108BF0005050502070608050131313131342121200
-:108C000050505020706080500301020000000000AE
-:108C100000000000000000001F8B080000000000A2
-:108C2000000BFB51CFC0F0038A0F093230688A2055
-:108C3000F8C4E05C760686751C0C0C5BB849D3075B
-:108C4000C32C0C0C0CDA4CE4E905E1FBBC0C0CAFBA
-:108C50008098850F559C871342FF015AC0C7CAC030
-:108C6000A0C1865DFF3A35043B408581A11C88D9AF
-:108C7000941818CC5411E2D2EA0C0C3380FC04A8EE
-:108C8000D81D201DAB46BE9B47F1E0C1378D51F981
-:108C90005B0DA169012A7E0B4D7E1B54BE4A074223
-:108CA000DF36C66E6EB50E71F69FB546E5AFB4C63B
-:108CB000AFFEAE3D2AFF209AFAAD503E00C5D55B0F
-:108CC000A7D8030000000000000000000000000022
-:108CD0001F8B080000000000000BED7D7F7C14D589
-:108CE000B5F8999DD9D9D9CDEE6608096C20E02454
-:108CF000861AFB82DFE577A841878034B63CDF8A9D
-:108D00005AD3D6F6BB506C551456BF3EE1F56933C5
-:108D1000F941122262049FDAD61F2B554BFB6C8956
-:108D2000942AAD3FDE024AF1F5C743AAD5D7A22F58
-:108D3000FE80AA455FC4D2D87E51DE3DE7DEC9CEB3
-:108D40004C76930DD01F7FBCF081E1CEDC1FE79EF7
-:108D500073EE39E79E73EE8DEAF3C3C7CE05388E06
-:108D60003FECD913028059D9A771F5BCAEBE99006A
-:108D70004721D2D35D0AD0A68009AC6C1D88A41F00
-:108D800094007F6A14565E2D7F3CDE5D097067D1CA
-:108D9000D7EEC3FA6B2C0502ECD9DD0C9039837D3C
-:108DA0000F453743314011A4B6E277F6937890F53A
-:108DB00037109C9C866876FC32F0D1B80015FAA179
-:108DC00022AA07C765F6CF81E47C18072083FDB38C
-:108DD000067A593FCAF3721AC795E5C5FA8B55D979
-:108DE0007EBC4F595721A389FEF01FF9B2E26438C7
-:108DF0007FFD35072AB73E5D93AD7F06444A0FFDE0
-:108E00001DFB8F020AC123AF07C4C3D130A4E5CA3A
-:108E1000FCFD0C341B5B9FF6231EBF509C989ABF31
-:108E20009E8DA7AE668D9E1DCD3A6402000C64B384
-:108E3000B7963DC3606EAE1DDA6E0148842FCDB08B
-:108E4000089EF6B02F5D5489502701187EFD881FBB
-:108E500009DF2FD1CC1CEDED279432FCD8F36578D7
-:108E60000C02EF0FD8FC1E64FD0571FC1CF8BA085B
-:108E7000C72F63DFAB878E6FCD3CF1F1436702EC08
-:108E80000B23BE4D84017C7A0AE282DE9F9486E940
-:108E900047D05931783F23E1BDA8C6971D97FD0DF6
-:108EA0001A21179F0462256EBEF1F225E2A90CE992
-:108EB0006548AF4FC9F6AB22DD72E0EB4A81AFFEE9
-:108EC000F989A604C3C7DA66B05E73B4936360A67B
-:108ED00073E069B568678FA794B27A39FA076811A9
-:108EE000EBC772D52F14BE9B4E10BE9BFF42F0DD28
-:108EF00026F89D49287AF6CF4F129CDEFE72AD2FE0
-:108F0000B68807CB21256DF990BF4B21FE207BF859
-:108F100035BECEECEFDF073FF5B303250E1BA74DA3
-:108F2000C0D73F9FCBBFB5D3D4F46689E4910BCEB5
-:108F300087517EB1769224F0A1F502F25FD1070A43
-:108F4000C05884CF844404605D7583369CFC015D09
-:108F5000F9539FCD775543F9EEE36C18842B14CE6B
-:108F60008DA7EF0FCAD1CBACD7583F5A90BD3F1D4C
-:108F7000FB2D8D55CC069C1DFDF8C577907CF271BC
-:108F80005CB7C758BDD942CECAD43FC911A8009218
-:108F9000F7B2A84FE3B0FA01362D733A7BE2FB1A21
-:108FA000318E34B45F6FBB0128E1F811F0D8725DE7
-:108FB0008627A89F41789404E1CBFBDECFDEEBE16E
-:108FC000937F7FB265BF9167BC1E89F869A4F6AF35
-:108FD000087E19C29F79E8BA5FAC33057A4D383DF7
-:108FE000CB47367F9D281F9D349FB0E1495FE4E168
-:108FF000130B52B46E5835AB7BDAE8F925079F6442
-:109000009CF5174B63F83C9438F10B834721BED590
-:10901000393C65D34BA93F09D7F819D88328231EBB
-:10902000D87C97D9ED214EEB3584768EA33D9B1CE1
-:10903000C12BC99290FBBCDE0D629DCF6BA8E0F006
-:1090400083E8DF032FEB4F73F627438587CF39DCA7
-:109050001B242EDF58FD0CE1D33BBE2211BC322471
-:109060002C1F6BB7598CEF955FF673BBE86FBD048F
-:109070004DBD61BE9E9638F4618324E484C6D799C1
-:10908000573EF991AF669C385F152AD7174BB9F553
-:109090000EB38A621746F2EB9D629FAD0F323141EB
-:1090A000B751D1FD74A9C445F742E15D7682F04E17
-:1090B0001C0A6F417C76A6E41B959EBCE104E10B83
-:1090C0007AE03B557C3D43F059A1F0DBEB60B4F016
-:1090D000CB43F15BD03A9A3B4AF8369F207ECB7C5B
-:1090E000B69D24E0CBB36EE7097A5BC0F9436176A5
-:1090F00038EE730A85EFD191E103F804FB6BBD6A8A
-:10910000990AD96B0013009E6E79D5B2942C7C26F7
-:1091100070B93EDAF1F78C4C3F31FE5B96599D1DDC
-:10912000FFF996B75CE32B8C7F90D90A1DF7854237
-:10913000E70DEFB9E6FDBAF49E6BDC13C5FBC18207
-:10914000C7FFA36BDEEF4B7F74CF3BCCE67D7AE1AC
-:10915000E3FEFE04F9B152AC97064977E9817CF64B
-:10916000FB0C41D7BBEDFA36BC79EA9F29E06A2FA8
-:10917000B0FE44D1FFE70AACDF2BFAEFC5FA652356
-:10918000D73F5DD44F15585FF2F175984F7FCE975A
-:109190006CFC816BFFD1A6713F88D9A640F09CA1E1
-:1091A0007E13AB21F5ED3E467BAB35A0B79592DF44
-:1091B00084FC226B0012E837F92624EB7CAC1F6399
-:1091C000C74DF761BD238AA677EBC01724FB1E3C71
-:1091D00010D9DC5D991D6FB59C6C929097DAA2FA5C
-:1091E00083E45F493549EC59668575F4DB0C5425F9
-:1091F0005A9696E23C0CDD62FDFCFA8A8B76627927
-:109200009326E9322BFFCB39736FFB0C6B35F0E102
-:10921000CE974EC37AD3C655B592BC3425C44F6998
-:109220005C35E5287B5E7C71561FE03F8B1D6566D3
-:10923000077CB6E9122EFFC5F7CF27DDE54B1A2FC5
-:1092400071B5BF34E1FE9E9D0FF07DC7B9DCFF30E4
-:109250005095FA2F0ED7C72A2DEE5FA0F9EA565483
-:10926000EF66F35CFFE1B5545EDF52ABB7B2F2E7F5
-:10927000AEF4B72C65CFB004BACC9652715CA5F9A8
-:10928000029BAF5AC7768FE73CDB35DBC8BFFF2AAE
-:10929000363DF38C5F9C8593CDB3E9EADC70ABFA85
-:1092A000FB13DE60F6D2C0CEA089F084F7CAE9A035
-:1092B0004474DD3909E9621527397D40AA66CF2358
-:1092C0008D3AA07FA4A13169C8ACBC31A6C5030604
-:1092D000DAC9190DF11E411ACC65EFE3BE20DA633D
-:1092E000AAFE07EA5F17DF7BE255E3D13FF2E3E630
-:1092F000351315B6DE77345BF47CB4B98B9EDB9BFB
-:109300007B262ACC88DFD27C173DEDF9A12431ECF5
-:10931000F9C9B8AF365B91DF06FCCC34423CCEF7DE
-:10932000D1FE7603CA113FCAE1745B14DFD7C1B422
-:109330006E40B9C4E5CBC6F8B6DDF87E633D4C435C
-:10934000926D3437B745D93CAE2B87E9D8F7CE9725
-:109350001FE3DF2B607A8095773536905CED89FBD3
-:10936000D2814A82FF7CE4E79E461F3093078AEB56
-:10937000185C0EBC0662EEF2AE4626B066123ED215
-:1093800001293B7F852D33C4C746B32AE8DC57CF7C
-:10939000DAE76E7F66DA5DDE88ED87F14BCDED733F
-:1093A000D79FF392BBCC24DB2B837CC0F1F8AF3E7C
-:1093B000260F76BF3CDE67E1BC4D3E4FF6E4FEC2B1
-:1093C000982F8DC6E716813F1BBF03112E5F3636DF
-:1093D000733F603E78367EEAAAD8707E03B5B1232B
-:1093E00081FE54B5B1270167E1332D9EBD09A79FCA
-:1093F000D57EBE88C68FC35FD211DB58B2B4360BA0
-:109400008FB7FE785925793750C6BF77C45ED3979A
-:10941000D63AFB93BCDFB5CBC3CEEFDCAF32506E98
-:109420007F3FA22D0DE7683F897DCF4197A532FF91
-:10943000FEF4CB81863B901F057E77BFFC13AD1AEF
-:10944000F1FDBC0CC8671BF73590BC453E4379B1B4
-:109450008BF1455F2DD27FFD2BCE755B5CE72E3304
-:10946000BEE2FCC5FAC5A17E86F4601DFEBBF0CB52
-:10947000EE157ED93DCD317A3EDD6CD07357730D3C
-:109480007DCF34C7A9FC54731D959F6836A9FCE3B2
-:10949000E6462AEF684E50F9D1E6267A6E6F4ED234
-:1094A000734BF315F464FC4BFCBCA13925FCC06B79
-:1094B0005CFCF0F7F1808BFF3E5DE32E9F6F9C918B
-:1094C0005DD7ECEF2763EEF279FA275DE5059ABBED
-:1094D0003C1FBEE2EAEFDC0FBEEC2ACFEBEF70D50B
-:1094E0003FFB4D77796EDF439EF5E22ECFDAB7C7AB
-:1094F000B31EDDE5E2BA43AEFE023177F97E1432E7
-:109500005C4E117F74C45A4B72F2CFE0F78DA12FDD
-:10951000B9BECBD47E64FE59D65589FC93F6C52DD1
-:10952000943B26E7275BEE78F9C4A6DB48FC65C3CD
-:10953000F197E6ABFFE5A7E1F9A9607EA85772F2C3
-:109540008397EE5EFE18226704BFFC2F1FFC6DF0B0
-:1095500001CC64C42ECFAF5773D877649F061240F6
-:10956000F69D1FED34477B75722A69E6D09F57F947
-:10957000E66F95593F8152E8C0786840C9E3E795A6
-:10958000F93E25A0F1EFC16A93ECB26230A6CB633D
-:1095900000AE796C5EF932F6FEE7421F765C089603
-:1095A000C4FA1B37414DE23EA6B8DABDDF7B46E682
-:1095B000FB18FBB9E9879126FC0EA5334798378F36
-:1095C000D7C8136737FDC660CF0B666F59CBDE86F1
-:1095D000AA9319F2019596927D9A0C19D4AF5997D6
-:1095E000B67CA518478338DA8972D884241B67AE05
-:1095F000CFFC05CE9BD947FF21CFCADA3D9BC4F3F0
-:1096000047621D5EE4337F29EA3D3F5C3D7BDC1110
-:10961000E905494BE2FEA9F8830C447F69DC653F0C
-:10962000D9F353948499C8616FFC4EE04BD2E34D5B
-:10963000DC0FA202CA877CF50FCAB6FFC972ED071C
-:109640008BA13F23231C311E6F82631719174E1DF8
-:109650000A87AA2492380EC6AB37B371DAC77CC624
-:10966000483AC6F948E67E2A2966123CAACEE1515C
-:1096700095B899C8C14703021EBB1F3B6E26C5FAA9
-:10968000A12F9C856F6D30D184FB256B8C4A786A45
-:109690008FB8EDAF190AEFA75A3CDBFDB9ED438057
-:1096A00056BE1F1E57A761FF6D750D1ADAD78C1DA8
-:1096B00068BFD21E5E523C9CBDBD5ED8BFDD280F88
-:1096C00003180FD785BC8AD1B33DBCAD11D7C1D12A
-:1096D0005A8687CAFCFD44E2EEB86E514DC813C7E6
-:1096E0004D139C41A3C413EF9DE06AE71FA7F8EC5C
-:1096F000B8364823C3DF21E0B7EB752A294DCF895F
-:10970000273EBE5D0EC4DCF0FEF9F0C7DB17F97B27
-:10971000F55C709D2ABCE58BC3DA4F75AC9A4A7331
-:109720007F4ACCB90E3E2BF84B1DABA5483E69F9DC
-:10973000BE8778FB7082FC5B5A38614055361EABA1
-:10974000E17A70E0E95AD1EED78A4FACCB540CFDE8
-:109750005C92916A427ED22AD83A9286B6B39F49E9
-:10976000D1BEF3C3FFF712AD93328DD68964B075C5
-:1097700094631C4931AF56D8F31DD9BC46C1F8CC0F
-:10978000477232D77A5921E0D116270CAD8A427838
-:109790003CDFC303C73A85EB834336FC568AFC564D
-:1097A00085C2BFA640F8ED7118FCED02FEB5C3C13D
-:1097B000DF26E02901A3857C990697B300171ACE0E
-:1097C000BC8B37C4F825424E314C11DDECEFFF2540
-:1097D000FA29743E1B059C23CDE78D2C3DEEC579FF
-:1097E000B0F9DC87F3CA379F7B041C6F285CCF6815
-:1097F000898411AB22559F93AF9E1070F42B228E5B
-:10980000665D3B2ABEFAD702E7F144962E8F09BA6D
-:10981000EC186E1E8F8A79F4C830F70DF4339E2E43
-:10982000F40E2C71D1E5A8C04F4FC0A6CB752EBA4F
-:10983000FC4ECCABD0F93C53209F1DCDD2E5393145
-:109840009FFDC3CDC751FF4551FF25519FFCE74701
-:10985000952B5AAD5AFC9E38A0CCCA8EC7EABDECF7
-:10986000AC776DFB2CBBDEABC80F5223D783ACDECD
-:109870006BCE7A605DD08AF6DB5A8C897E02E081FD
-:10988000F6AF3688766F52BBC583FDBF25D607B5C8
-:109890005BD73EBFD50A53BD77F07DCB828FEC7A84
-:1098A000EFBAE15D61C37184E04D0CC2F1BEB3DE7D
-:1098B00013CAE7A9BF217947B19282EC1F7F699251
-:1098C000F2F74A20D283FEC50E2545FE640C36A071
-:1098D0001F7275204EA92A23F9A3CB2EE6ED7445FD
-:1098E000237F6A005270177BBFA154A1F8C862257C
-:1098F00019F1A31D21252D0AAE827E590BF63FD604
-:10990000A0FC2F1B9EDB8ABED845FD3078B0DF3B24
-:109910008BA23B91AF364E520DE4AB9D936E20BFB0
-:10992000F96D2D3C7FF0B6F355DA676D7A3942FA5E
-:1099300077AD12FF2CD6B74CD5403FFAEAD0472F6F
-:109940002D67E5BE96625D3A87E641705B3E48B49E
-:10995000CD74E42332B80371CAA7233FDC6D8D3C7C
-:10996000AEC37ECAB1FDEA0546BCDB40F1C5E418D2
-:10997000FBDE59A792FD7A5B45D57C1C6F539D4653
-:10998000F6C6A6C5552DE4C7AB0B91BFB2246C48F3
-:10999000E8678FCE519901CECAA5460BDA9B91D9C3
-:1099A0002140BF5349051F2F7206901FCA0F3D89E2
-:1099B0006AF68C76A990198BFD2DC97C09ED99BAB0
-:1099C00000F9E1D9C4F6D78EA39437FE23FF0C101B
-:1099D0001EFF441910EF367DA33D83ED87CD638CC8
-:1099E000A60BAC9729AC5EA44B81CC8C02EAF51493
-:1099F000582F5D60BD0CAF17800B87CDE78338CF44
-:109A000023D4D81F9EC7E8C82BACE4F6BBD36EF1B5
-:109A10007BBE8F362FF42ABFC80B9D0373785EE898
-:109A2000F0EDED7CD091E60BE0CBC2298F5C7F6D31
-:109A3000F3F07E63FFB81B62987FD959F655F1BCED
-:109A4000913FCBC5FBF2353194779DE5E27BF98DF3
-:109A50004DB9F6AF77FAB91CAE81C4B0742811F0D5
-:109A60001F62B0637E4F8DC2EA47F2D7574B7DC36A
-:109A7000E6596A8AD540EB76B18FD66D008501AE86
-:109A80009B0ABE8EFD904A54F37855B4DCB17EFC3F
-:109A9000F57B68FDFCA25C06A98EE813473C7AF9C9
-:109AA000C4CB170170942B4F9E4FB6FE99F8C4DFBC
-:109AB0002517B47EFC3D05D64B17582F53583DB59E
-:109AC0004B2A48AEA83D05D64B17582FC3EBAD9D8A
-:109AD000AB727D0E7F68C578BFFF139AABBCF613DF
-:109AE00021F7F7B3C3AE72C72C777B75B6BB7DC7C2
-:109AF0006C777B750E6F1FEC800518CF2F749D1C43
-:109B00003CC17552A30D5F3F5237C2BAD2F420B6A2
-:109B10002F510CC89492BE4A0BBD95331E7E9ACA33
-:109B2000D77F959FC7CF6F53F420EE23FFD6E72949
-:109B3000A93C9FC09EEF48F0DAF2F7B7B2B0B7F297
-:109B4000E47D438C9F7FF043288E768EB1506B78F6
-:109B500085E1D1FF2CCF7BF7F6FB8A9A9CA63AF6DB
-:109B6000C5CC3E83A4C30F737E99C2F36D181DD07C
-:109B70001E5221D158C9FA6BABF0913DA28447D057
-:109B80001B150EB995232F2FEB970213CF53D02718
-:109B90000360FE9B7CDC501C08EE08F4D166BA180A
-:109BA00053E54E07180386C493BEE212CF13ACD719
-:109BB000519E95064F75BF9751BF92791B1C2F1A66
-:109BC00045BF4A1FE5CB9CF27E478037087753BFDD
-:109BD0006C97547A7C6CB65F7F2C452F314F56764C
-:109BE000E4CBE1B908CA37F1C53394DF30214AFB31
-:109BF000B2B5A5D7B9F2C1FF59AD72F98754BDE32B
-:109C00005A09E3BA15579B7DC3F079331357E4F72C
-:109C1000AC586EF6D5E4AF3798A78FF99E39D64188
-:109C2000879A4CA3FD6E4D0EF3FDBC92227F63A775
-:109C300054321DF32DEC7A4A0593B40CAEC84CD3C4
-:109C4000C2FD5EE7585F1CED5405D6EF93CE62ED82
-:109C5000E4C571A7FFD2FB542A94B79DF3B95D65A3
-:109C60007A12E1147AB26D047E1FD1EE51E3C95C21
-:109C70007ED16FAB7C5FEB0FE5FEDE176A78409D0F
-:109C800035146F8F217E717F3B06BAA4FFC3D9873D
-:109C9000F2A52AF6BC8478585BB62836DC7CD90657
-:109CA000EAF0205D18897F16321F4179300C1C3F85
-:109CB000CC0507840BF37FEB0BE3C48783F65229B3
-:109CC00088FD98199518DF870457DE32737306CF25
-:109CD00043F897864DA49F6C6E01F457DB76936C26
-:109CE000865EF5113DEBB9FD54C3ED2193FDC179BD
-:109CF00044EB87B7AB654FF939D56D0FB535EF003C
-:109D0000679E9BF75C85FD4C871A5ECC8D8FC2F6F3
-:109D1000C3B7337EC13CFB8DCD1A22057A9A752AD2
-:109D20006F688E51797DB341CFF6E61A7ADE8C4D9D
-:109D3000E7E2F9A7545725C35B57EC81D8E5ACCAD5
-:109D4000ED283B288FEFDE05682F770F96D93690E8
-:109D5000C1DD3D09785E9F7AEB02DCE7770741F8C9
-:109D600015DA16A05D9D2DDFD1361FCBC2CF10EACC
-:109D7000BC6F01EEF76F17F90FA098DA250EBD77CB
-:109D80005AC04FFC477B576A6FB5617F414594E1EC
-:109D90009105EE3298084F50E3E505816DD43F8977
-:109DA0000036DEA7033FE0E34D11F96DB54B46C029
-:109DB00023F7EF5BAAC1FD5DB525143F52E3717433
-:109DC000BFC2ED6304DC05F6034A92EB3B718E2FB4
-:109DD000FFBA1941AF093846A23F4307F9D1EDF365
-:109DE00069CA0BB9F5F4A91EF776FFE8F0A2D6F51B
-:109DF0005B7886ED09353927C0DA47CCDE4C252B58
-:109E00004717672C5ABE058E3B3660E7392669FD39
-:109E1000DB7856746E77ACF0D0D15FCAE3754171D0
-:109E2000FEA4507893AA1847F4030F37940F67AF36
-:109E300095257C68840DCA8BB18D21E19CE1E531CB
-:109E40006689AB5C5C37C1553F12AF727DF7EB1F83
-:109E5000777D3F513A5DE299C7A784DD6897CFF5DA
-:109E6000CEB3C07E0F1627560570DD34404D8AE113
-:109E7000F5CE2F3C44F80F0DAED385ED6605E58396
-:109E80008B753D8F9775FB7B5DBB59CFCA86FD7D7A
-:109E9000062F9BF6F738AF6FD9DFA7F2EF28F759F7
-:109EA000F96B9D67B45BF81D5AC96F0B152958E211
-:109EB000A0CFD8F10DAD08DFF8CBD2318BBDEFFECE
-:109EC00050E6F2007A62CE7A776ADC0FFDCC943BE2
-:109ED00062E8AF5C77E64331207927E58C07FE3CEA
-:109EE000C0F3C5CA42899E00AD77B3BF98F1E1A126
-:109EF000876483EB21E535D4873E8BE7E3AB10DF46
-:109F000067A25D54C3FDD521F19DE85899AD3F4846
-:109F1000574FF9EF34AED77F87491B0CCEEF159B17
-:109F2000F7D0B890961AD97AAFB0A01FCF1F81B0E2
-:109F3000FB26F2A6509A48939F6F12C3A7CCBE4F40
-:109F4000BEB8BFC5CF706D5CA6FB7089542D8FFB6A
-:109F500048C00DDA9163A5E3ECF93DA417CAE39B71
-:109F60005280FA7BED990F35215E02997F0283E1E1
-:109F7000ED1F27A5C040FF6F80C315B8AC07483E52
-:109F800057F7109EBDF85A3788F7B40BEF3F0970AA
-:109F90007F7E2CC9DB0DD65358BDA943EB75077BDB
-:109FA000E6AB68BF4DE178F48EF35E4012E776DDF4
-:109FB00070D8FD7AEBDF1210716D2D4DF18D67CEEB
-:109FC000BC21867EEDCE298CFEB5F9E97F4B80E77A
-:109FD0005B19C76E22B9DB3D6923C533D7556F26A0
-:109FE0007BF228B323F0FC747765EEF69DCD3C3F01
-:109FF000E65CB8BBB18AD1A7F37999FCB4DE7ADF0D
-:10A000000954B9E28D5A857B3FC8F8AF0FE5E8489F
-:10A01000FC27471EE0EB72947C8766213FCF50D629
-:10A020008EF6805F94EF0E1C6F13FA9FE47FF9F2B7
-:10A030001E70E64BBE2FF82213E0722658C1F9A31A
-:10A04000DB6F494EFAC5D8FBF98E76F9E8968F1F7B
-:10A050001E17EBE17D25DE44CA5F49E9B9E4B3127E
-:10A06000FBF42F173ACE7BB52B694D47F86B364A78
-:10A070004EBBF61B6632A439F627A1D805BF5C8813
-:10A08000FB1F259E739FFE29D38C6A6CFC9B9B61F2
-:10A0900046359E4B50AC00D6BB59C934D2BEA2DA6D
-:10A0A00047FEF27515D7EDC53C2BABD617C76A6DC9
-:10A0B00015BB1AAB0CE4976D9467FAA6BE2486FD17
-:10A0C0000462EA8CEAB194DF9DC079876B59BF0EB8
-:10A0D0007ADBE3DE2DF8F65BBA3959E3F2E034EDD2
-:10A0E0002F200FDE87788C1B590CCF39F65743F1A0
-:10A0F000CCF3043A2B86E0798EE6E0EB00E27906B9
-:10A10000C9FB9CFE0B86E7B35D780686E7A9593C40
-:10A110007757703C77D66CEEAA72E2B966D7DE4A02
-:10A1200003C7E7787E48E3E773438867079C5E3C94
-:10A1300087255BFF7CAC1DF9D6CBF70CEF7F8FF04A
-:10A14000D8EF3F0AFC82ECE1B1E313176AE43F4920
-:10A15000D1FEE94E29AF5EBA442B402F758A757443
-:10A16000A7C03FEBFF0BD47FA9E8DFD6B7421FFEA5
-:10A1700083F66F0B501FB27ACBA89E9EA27DF06033
-:10A180003D0B86D5A3ACDD95C447614FFF268C4AB5
-:10A190001FB37EAEA37E34CFF8069C949E67FDDE8F
-:10A1A00044FD2A9E7E4FB13DC1C6E926FC81070FC2
-:10A1B0007F663B2696F4F083D2E3927B363F942F62
-:10A1C00077D7CBAFD77AB85E1B6AD710DFFEBC73E8
-:10A1D000CF6EDC27BDA99BDF46BC8E761DD876608E
-:10A1E0005928B94DE376209D83B0BE51946E636DBE
-:10A1F00095E33D511E7F77EBA3F1B63D54CDF5407D
-:10A2000070947A699FB0D73AC6301955CC9EFE44F7
-:10A21000532E3FC3339A9DB7E6B69B7F8373243F8B
-:10A220005182FC6BEDB1CFECE863B4331B7B20971C
-:10A230009C4F86923FC7F9A9BA65927A15FE917C28
-:10A24000FD9626AC9D7B6792DCEDC7BC461072186C
-:10A250004D6BF4C74519DE0E69E4C288A37FADECEF
-:10A26000626B3ECAB10AC62F587F5CD33E29992B38
-:10A270003E6EEF7F10881CFB97719F9B9DA47CB85E
-:10A28000C53347D8DFB4D8F6EB6F715E87D49E0B29
-:10A29000A638F06ED3E90E2971E179284FE7713ABB
-:10A2A000158F924E03824EB098E7A19E7BEC5C8D99
-:10A2B000FC8B115F02FDF0417F8F5EE2E0A3713EF7
-:10A2C00048F68E02FE7AE8DF7D1CF77F611FED778E
-:10A2D000BBC3CBBE83F7EF58BA1A9F6264C7ED6663
-:10A2E000FABEC4A17FBCFEAAC17DF4E2C2F265A79A
-:10A2F000587328DE9FBD3FC89D7FC018AB06F3860C
-:10A3000056CBDC7F7E67D1D7280F618D15D003A592
-:10A31000A4C7C8FE5B27F2D93A453EDB5A91CFE687
-:10A32000B7566FC5FA9B0012E8976C9997A2787F91
-:10A3300054D1F4D638C2919A837A225A6AAFCF1F89
-:10A340002FC4F53958B6BED1DEC0E61B8DD9E58DD8
-:10A3500064BFB5B77079F3D9E00B0BAD7A64C53E35
-:10A36000A2C7A6BA25C5308C3F325CEBCE9F0B55F9
-:10A37000875C65ADA2C455564B270C1BB7F819FA7C
-:10A380008966E17CFA208E70E6C9179E12E476B6E3
-:10A390002C4FEBCF60BEC1D96A7CB381E7A8DD79D1
-:10A3A0009CED416E0F3E8A0E218AE30ABEA8E3713E
-:10A3B000D5A2B955BD180782319C2F304FD0C90F97
-:10A3C000F9F8E2AF8D1F5FD1E118E65DDCD21A0526
-:10A3D000CC73B965EEAFE21903E56A5F0CF333DACB
-:10A3E00098246965DF37CCFD9591CB9F7C404B2E3F
-:10A3F0000F22FEC209B2BF223393F4FC6BCF6B2451
-:10A400007ADE19E47A6E8AA0A782F49C99A5E7BA4D
-:10A410003A46CF99D975BE4EE9D10AA1E7F9387EFF
-:10A4200019CAA1FFA67DDBCD75BE46944306F45242
-:10A43000FEED865A9F0FFBFF6BE1C5862B3C97C94B
-:10A4400047A25326817A61435CF1A11CF99BE3C3C7
-:10A450008FFAE87D017CF8C35C7CB85CD0432EDACF
-:10A46000D7942BEF6E4A5072E1653DD28BE3A591F4
-:10A47000E3C5F757C1CBA0BED0922B916FAE88A990
-:10A48000B4EF564ABA3A285EC4F41EC61B56C8A694
-:10A4900081F126F8969FDFC7847ADBA15FFE180C56
-:10A4A00072FB445EBF88E2186C6AB82F63E58F0DBB
-:10A4B0001B0F4DFBFB9DF79478F3325E0BBAE31054
-:10A4C000472A961423BDF2F5F776F35E1DCFD5DA51
-:10A4D000F919DEEF2B6448E53AB72885346167F651
-:10A4E000AA84871B99AE9D86F8F8D8423C9FD9591B
-:10A4F000D13A8EEC1871AE61C5966775C501E70A51
-:10A5000085A9BFE943E763E37705AAC91247FBF4CE
-:10A510005E577B6FBBC1FE447B66B7F9430C3E536D
-:10A5200049EDC578B37D7E43DD323F436A330FDCAE
-:10A530008C8E270577A1E7388E3CD0D681FB6DB491
-:10A54000BF3EC1F8E4B78FC8F156F6F58ABBCF58C5
-:10A5500088E75A0F01E7179B3E6F3DD0362E175FF5
-:10A56000E4A3CF79A12087E714F3D759210F7FF512
-:10A570005E549C8153CF5F8BF3F197C0CFE15E8E29
-:10A580000FB86B6C4E3AE59BCF209DEC7682CFBC2A
-:10A59000EDF3B5637C95E07C95899E5D085F097855
-:10A5A0006DFA9D2CBC23F155608D6CE079AE4A2587
-:10A5B0004172B3B3F43A4BDCEB48F99E72CFB48CE2
-:10A5C000B8D74AE4B54306ED8940A949767448DC1A
-:10A5D000CFA355BBE5A612739F9B8835253276BF66
-:10A5E000E8BF0CAC5169DCC1F8711832C12896790A
-:10A5F0009C14C51FEE2B02F04DF27BB27639FD9E06
-:10A60000F65311F96A98CB4BF7B2C1E747C86F719F
-:10A610008F13BB78F8FC1A6F7D082BC62107DEF379
-:10A62000B753E090639FB341DC2B6AE3DFDCB29465
-:10A63000F2CA83E08BD3FE20D661E1BEAF43ACE724
-:10A640004E7CCEC573BCD375DAAF55F0788B257DC3
-:10A6500099FC0CF6B9337B3CFBBC995D6F24FAAFD7
-:10A66000C6F594637DEF0A717D3AF0B5D47FE33E81
-:10A67000C4FA1318780FC5E3CD1F509CFA9CCC5B2D
-:10A6800032FAF79F098DA37ECEE9EF931738D6E50E
-:10A6900039E21C0740AF9CEB9C97DF0AEC427E78C6
-:10A6A000EA30DF8F3D75F808D9E14FFDDE9746BEF1
-:10A6B0007BEA83E1F31E1E17FB22BBDEE3BFE7F656
-:10A6C000D9E34A6F512EFB2E3B7E9AEF070FBBF961
-:10A6D00015945E19F965E0A67D32FA071E6FD6A4BF
-:10A6E000D799FC9927E679CEE13E19F74D23CD6B3A
-:10A6F000AB87BEF63CB7D6737B746BFD9110FAFF47
-:10A70000B73EC1E77BB49E9F8FCD07EFAE669EDF5D
-:10A71000B1F589DCF86898C7F7C70D7EA334A75D4B
-:10A72000EB3967B54093DDE7BB4E317CBBEBB9DD60
-:10A73000B55B89874F049EBCEBBBAEA711DD08510A
-:10A740004836CE9708BDFB5D7E92035F6FF932E617
-:10A750006B2C0D9B12EE65A12FF3249B5789A92525
-:10A76000F0DE98E2FA1E6932E677C4781EF937AF58
-:10A770007E2DF3322BDFDC5444655D379E5B84F81D
-:10A7800028D5C99F72337A5C48407F732DE627D065
-:10A790007A64E5C0CD3DE7A13F4B012E2F98C56BF4
-:10A7A00028E3E85E3F72D2E4931BEC473A1EC8B63A
-:10A7B000CB3B4F4FDE6D00960C2FC796F3FA16FB7E
-:10A7C0008372A8C49367A22F74E7A5443DFD4F454B
-:10A7D0005BB5AC80BCF2931C670C6CD30CDC67D708
-:10A7E000FAF434D607630CE60D861B9981C4E83968
-:10A7F000460709CDE591F0BE0EA091FBBF33E03CCA
-:10A80000A7D350C4E5D584AB6E97709F7134CEB892
-:10A81000621A96DFCC997FD52EE4C76059DF45F2E6
-:10A82000B4037AF7525C20E9233BFCE6DAD631CE5A
-:10A83000F64B8B24DB1F28E80F86323B4B7F363FDD
-:10A840003378D65F8EFEB1E56EBC8F962ED714712D
-:10A85000793512FD4F761C9B6E43D7478BA0DB03E7
-:10A860001417EDAE195EEE0FA5DB36D277E1DADC18
-:10A87000F9BAD715492E796C3F3548419CF1892C9E
-:10A88000EE6796C7CF6EBA7F18F9233BEF67866CE9
-:10A890003FE38C1E13E356E3A1C7C473DF8CA7E329
-:10A8A0001940FE3601ED24661E111FC99EFDDC46CF
-:10A8B000C14741789EDAB35560E9A45752A03BF2F4
-:10A8C00054CE93C371F45FACD3C3742F12CA4F9E9E
-:10A8D000BFC3F3FC8B39480CBFFD80F22D542E838F
-:10A8E000857EBF7A01AFC4F80EF3FB0FBC7500F78D
-:10A8F0002BE1996E3A29078A28AF2DE43D2772E0B3
-:10A900009A6B687FE3A1E368F3FEBF5F24ECFF224C
-:10A910000893DD24DAE7CBDFB3ED7E1BBFC6B108B9
-:10A92000E5ED741C90081F659313F7E3FE0C7E257C
-:10A9300003CFCB0413F3F656FF74167D1F1A574846
-:10A9400054225DDE3A50A4B75616922F9948B6B0FD
-:10A95000FAC68140BCD520D5E2D3908E7D12D1516C
-:10A960001AA751BED6EA7FF7DF1F18265FCB8E3FAE
-:10A970000E96158BE29B5DC674CD294FCA42C95F06
-:10A980001639E3F622AEEBF5AF07C3EDB16760F41D
-:10A99000F18FD2F120E2F29F5F84F64B17AE019E59
-:10A9A0001747797A5DE5BCFC46D1944518DFE98A02
-:10A9B000F07271F8C8792D246713E4FF5BC3180E99
-:10A9C000F1087BFDE21E4963FC85C3C80BEFFCD791
-:10A9D0002BFB284FFE9EF0FEF3CF40FAC47DE48FA0
-:10A9E000BBE7FA6DAEFB93DED41BDE2FA2F5AAB750
-:10A9F000637C7A62D2CED774C74526A0D660F39B1B
-:10AA0000C408E3677838ED626845B6A9BCACB71CEA
-:10AA1000F7C96B4BB78DE1E7FD17EA87C86E972939
-:10AA20003E9D0F5EAF9D9E6FBE76BCDDDBFEAE0829
-:10AA3000BF47D51B17F3FA831E44FC9651FE2C60CA
-:10AA4000FE6CA7BF2F673CEA8D22EED76CAF5894FF
-:10AA5000B81CE7A598730F327CDC5B1AA57D90FFCC
-:10AA6000A2DA4B7D0E7BC3CE6753C47ECE5F9A22A3
-:10AA7000B9A86866D719182F7A5EC61505153D3B2B
-:10AA800025B4E7EDFB2010AD174FE5F3C579058040
-:10AA9000DBC5785EE1B863DE1073F8C1509E88FDB7
-:10AAA000DB29A0F7B4F0ACA1F49DDFC5F3D0635768
-:10AAB000F0F34D1395DCF41E7F99EEE3F1AF534BA9
-:10AAC000E77CEDF3C53DEF8AA8B47EA6E8ABF7E2DC
-:10AAD0003D771D567112E33103FE5417CAAB0DFFCB
-:10AAE000E883CD34FFD1E937454FD03D7A15297D34
-:10AAF0003A2EEF7CEDEE48ED0A129E2D9ECFE0FD42
-:10AB00007E7998EB9B9E94EF36FC6E3E9DDAE9C70A
-:10AB10007D678CEFABED7D783294BC3CECB0CF75AB
-:10AB2000D3223E9A92BC94E4C0405961F72F0CE2C4
-:10AB30002B4F1EF31D11AE97A718AB79BF9386F765
-:10AB4000CBDA78F9A04B16BF1721134438FC8C914F
-:10AB500013B82E6EE472E2EE35BBE8BD7263DF7CA3
-:10AB6000FEBDBF05F5EA1D3EB82297DFA82DC2E362
-:10AB70004193CDCC3AD41B93533E40FBF4F688412D
-:10AB8000EFC75FC6F1D43509E238EC69D81FFBCFB7
-:10AB90009E4A95F4D2D852A0FB92C6AE01D2DB6396
-:10ABA0006B206DB072D7CEB93BD1BE55AB218EAE06
-:10ABB000EBDD953758680F6CAA0013F5B8FF46B661
-:10ABC000C0587DD5F0A53150BC29B58CEE6959CB64
-:10ABD000D6255263ADD140F6C3D1182F072AF839D4
-:10ABE00098AE331582C3BE7F9CEC4EA61FFCB5FD0C
-:10ABF000265EFD65C015D48F7F2EA7AB71573D9D96
-:10AC000053EB1AF310DD4B635D033CDE69C7A515FA
-:10AC1000C65F6C9CF62BF49CFE9523A1E4B79DFCCB
-:10AC2000C0F891E44C17E613E4C0676798E3F30EAD
-:10AC300021E706FCF0298A97B4F8E83E176FFD6516
-:10AC400002FF775B4BFEE10C23AB6FECEF078B0C45
-:10AC5000977FA3E20395E6B348BE1174A43BB39378
-:10AC6000E8FE17BC18F4745A9617943BCEB3DC1B5D
-:10AC7000EF85C98867DB2EAAE5F68C7DEE91E12190
-:10AC8000730FFBAED705E87ED1F14DB9ED23B5408A
-:10AC9000FBA8ABC8FC6918F30D443EFFD7972F21E2
-:10ACA0007D9FEFDEDABB235CCEDF2559951D489FE3
-:10ACB00049FCFE196FBD83C25E64F620F1CD268B80
-:10ACC000DFBBB5896D7D1E45BEBA9EDFF3C7DEF3DF
-:10ACD000730E06D079F1D80DCBB45CEBD51B57CEF3
-:10ACE000B7EE826A5F3257BCA556D0AD24AECFF71F
-:10ACF000F1E983E9B0478B6A81EEFFD2197DD0F686
-:10AD0000AD805E4ABADFD858528971A15B6F540D8D
-:10AD10007C7F5F65AFB510E72D41EF839823A3F4E7
-:10AD20009A781EBD223ECEE8769CF72EAE7894CE61
-:10AD3000C3DFFE54000275783FA9E7F7D938E9234D
-:10AD400067E96CEBAB7CF32BF4790BC397F3F780DB
-:10AD5000308833388F220B0CBA1FD9E8253BF4A872
-:10AD60001544DD0A467D2FD72BED2178308EF7CCA8
-:10AD7000F2F2A6F054C0FB6735A597EC754DAFA273
-:10AD8000725175A29BECF369DBF55CFAE153914AD1
-:10AD900097DF24E4895369C91B9AB89F56852939DE
-:10ADA000D6D9C12285DBD3AC29C573ADE1E5EDC9A8
-:10ADB000F2C79B42DFE8D97D32F107C92E468F707A
-:10ADC000C5A2B764C77D9C61EFF9622F3D3DE59355
-:10ADD000A5E73AA4A723BEA0D52735A49FC1EC249C
-:10ADE000B2FBEB019CF7A66FD22C7E0F8361F82C8F
-:10ADF000077ECB85DDA77CA0D079DBBB9676D0FE25
-:10AE0000632CEB03F37AD933E7BDD3078B785E78F5
-:10AE10005751624984F27281EE195E27E4C679F2D5
-:10AE2000CF8298871504A6E7908F16FBE0C11C74AB
-:10AE30002D8F703CA743E6E722B3F2CFF77129F7D5
-:10AE40007DA276FB83C20F50B81CE6F39D620ED044
-:10AE500079D2819B0AD3DF036C6EFBD02E57E25C64
-:10AE60004FF719D03E93EE7F4AA3DEDD145B4278A4
-:10AE7000BF0FF529DA56B55C4FFA53DC4F0C864408
-:10AE8000F7CA86C4BD1BF7A58E3C8B76CFD11A05B9
-:10AE90003D3E10AC485AA85F8BABFB2C09F56C69A2
-:10AEA0009AE2C74C8F598867E3AE4504B75FE96DF6
-:10AEB000417D99562084FA7C008D4966C73D127EFB
-:10AEC000A403F35DFCB5695064DCD70338EFF737B2
-:10AED000602FD9597EA687C96E52FA5A502EB5D71F
-:10AEE000EB14D739EDC63E70EEEFD8B8B7E2B81321
-:10AEF0004AD97846567F7AED8D7C7606D3B3222FD9
-:10AF0000674107EEDF6829B1F2C3E1ED1D686F7E8E
-:10AF10004B37BF4EFC93679FC1F8E29E48D9E8F9D2
-:10AF2000E2B9B09B2F06FD27C2EFBAAC4E087A30CB
-:10AF30002EFD0D83FBCABD7EC0F99F7BECBE3DF7A5
-:10AF4000307CC8A84FC972E9D9F324FBBE1CFDB000
-:10AF5000AC7CE581A92ACABD5F4D90F1EC30F25975
-:10AF600014F9E71DF0917FE81DD81F9DE180676708
-:10AF700084AF13E8F2BFD6E7F03F5EDEC3CBB6FC8A
-:10AF8000FBCA5DEEF29761C938B4BFBE7CBB1FD26D
-:10AF900012FEDE29F7BEF99108CF37FF0AA43A1056
-:10AFA000CF6BC5F9A46B1E9BAAA2FD74E50CBD1264
-:10AFB000E39F361CCF0A3DFD36E363C3210FAF0A82
-:10AFC000A755CC977A7DFB8CCF9C0DD84FBA6302E6
-:10AFD000FA0FC7404E3DFEA52E379C23CDC30BB7BD
-:10AFE0007DDE281F1CCA1629A71FECC588DB0F763B
-:10AFF000B2F7B31F45FB7856F6F7D7D9796627DB4A
-:10B00000EF9FF2F47B8D86175103AC527A1AA5AAF2
-:10B010006CDC2BE8B7CC8968FFED989FC1DC7547E5
-:10B02000BDAE02EB35FA86A937D27C5687EE8DA2EB
-:10B03000BFA84F8244AEFB77CA42C931D15943EF12
-:10B04000E101F1FB820EBD62DF63DFBF08FD7C0121
-:10B0500060FB7B7A2AC407E4FF91D05EEDC9989526
-:10B06000183F565CFC5184F11466F7AE12F6655138
-:10B070008DFBBBD71F747A94AFEB7AE823FB3FAA12
-:10B080008533329E6BAD73E73FDD59F44592BB2BA0
-:10B09000F7F9C9CE5C09C6ADF533691D921FECFA0C
-:10B0A00075A7539CF8FA32236EA15C83B8496D3DB5
-:10B0B0007CB7EA0309D20E3FC12AA55FC5F5B68A5F
-:10B0C000E90FE7FBEB62B2F1468EDFDF643FFDA0E4
-:10B0D00019E11AC4838F9FA7D559D931CF233D5287
-:10B0E000238FCB19C5170FB37FBF2EA6D238CBD66F
-:10B0F0004D29E6FE21B7DC7C57E8A99F3CFC2D9545
-:10B10000EEA3FAEEAB17201E563C2E83C6C67DF783
-:10B11000E10864487FA555D45F576D9773EA77CCF3
-:10B1200074A2BC94ADDC7F79D5B6407A316B7FD503
-:10B13000A3AF9F050CBE775BFBF74CC475F05DEECB
-:10B140005704ABEFAC8BD8FBAB14F8BFB9ECA9CF6D
-:10B1500047B9BD7DF847454DB8BEA52D3BBF48FD5D
-:10B16000F65EEA0F38E2734BA2FC7C2CABC7FDA065
-:10B17000DF91D25372C4EF6CBFFBE1EF481CBE1DE0
-:10B18000FE7410E1DB72BF9A6470ACDAF21EC993F0
-:10B19000055BBF17453CACDAE18ED3ADD8FA610749
-:10B1A000E6A1AC90A17F31F2B37C8CCA474DAD5F74
-:10B1B00026B9CFCF57AF2492B07A3FF8EDA2DFB0D7
-:10B1C000EF6FC7640832D1FBF6BE83EAE3584E86C0
-:10B1D00053B8C35DB5C32DF7566D799DF222741F28
-:10B1E000F4579C8DF9016EBEF6D667EB4745FB69B7
-:10B1F00055EFBAF7D0AE5CB5FD9D5FA3FC58E59165
-:10B200009F6FE37FCA87FAA9DBA29EFB69B61496FB
-:10B210003FB1E27B47EFB5D8B887B7FDEE5ECCB360
-:10B22000BFFAA3F7EFFD67B4179E0AEA28FF577D20
-:10B23000F7852838F8F11EB1FEDE9D045639ABF7CC
-:10B24000EE7F06D278A0F5DD277F3B19CFC9BDFB85
-:10B25000C81FC719ACFEF54F9E47F7F25FFFC30545
-:10B26000E387B3AB905FD301275C69A2ABB143E244
-:10B27000C6CB13E2E9A1C7E1470654B477FF2041EA
-:10B280003FEAB995BD1FAAB83FD963423FE267F7CD
-:10B29000F6D7F77C9595DF61F409E4A00F9BFF4496
-:10B2A0001FE96F2626D973E5F6D71721BCABA09FFF
-:10B2B000F4E9107A3ECFE839334B4FEFF7A3704CE7
-:10B2C000C57DC1AA8719FDCE423A32FA9D35947EDA
-:10B2D000EFE07FE60EA5DFE351F7BD0947E1EAFBAA
-:10B2E000CA7163BA7D6CCE3C886C9C61F87B506CF3
-:10B2F0007930127EAF90385C5D51F3A728EF0F6F65
-:10B300002B1AA4EF62A4EFF78E4E46E3ED4D7FFFBC
-:10B3100017110FFD4F0674FCFD12573DF922ADB316
-:10B32000777FF89C6A505C07A2D26C5686C19FFD5D
-:10B33000C0CA2BB90F1CAE79E0FF2FFA356B7F0D19
-:10B34000EB02F7998C6E54DEC3D61DD1217D61A32B
-:10B35000817A335D46F35E99E6EB61657AE7C578FD
-:10B360001F8517EFFE62FB3ED02C3DF1BE8395DBBF
-:10B370005F5D847C978F9EF6FC759CFF1CF6FD013B
-:10B38000F77AF5D65FC9D627E9292F7DD33B7F8190
-:10B39000CF77EF0F28783EE35D71AFAE97EE59FCA3
-:10B3A0008B73F3A38C431DF7F0C7601C4AE0293F61
-:10B3B0007FF0753ED2FC468BBF77A2868B8F6C3CAC
-:10B3C0001E3E965BFE4F2CE6726325F434A2E9EC38
-:10B3D000B55714485A132BB3F01E46FB82C17BF8B5
-:10B3E000BB32F9853A7A77931CF7CA8B9590FBF7B5
-:10B3F0006FD516737B71E58E9D67A15C3BBCEB47F7
-:10B40000C49F2B1F7E55C57DC79E2D3F50FB6AB341
-:10B41000EB01F543DA81EFC3DFDF79169707B9FD5A
-:10B420005E73C57C563DE1EE7FD5C3EFB9FA5F612F
-:10B43000F592BD30D2386F2BE6A538DFB7F7F9E9C2
-:10B440001EC2B77BE5C65C76F0E462BFCB0EEE7839
-:10B450006ED16FF03CECCCFD21BA7F717BAB39FE35
-:10B4600016B4DFF6FB457CD1FC1DDAA5DB9F0B9102
-:10B470009F67FBFECF503E90DDDF631E7CCE79DE02
-:10B480005A1061FDCDE94BCC948DA172A3EE00DB87
-:10B49000EF39F8E0FAE71AC7A3DCC7FDB181BF5F57
-:10B4A0004E89D3392C39BA88F2CC65DDA70773EA07
-:10B4B0006FDE9F3FCCF7937EC698CEFBDCCF3DF688
-:10B4C0001FB47FEF88FB72E2E13E817FFBF73FD93B
-:10B4D000EFD74B9C6FAC67793C24DFFADAD81C8B32
-:10B4E000573354DEDA5C17C7B8CFB5C5FCBE9EB182
-:10B4F0006F18129E2D99DB674CC7F917432FE0791F
-:10B50000FFDB9BF5B8333E5476D86CC17A67BF0930
-:10B5100071AC87E3E27E6DB4E35AC5FCDCF3907155
-:10B520006B7B092F858CAB9DC0B8B79E8271C327FA
-:10B53000806780CD058DEBCDB3F28EAF4EE379639E
-:10B54000DEF192B63E10F1055A7AC3F8DBFCA29FF9
-:10B55000A5C586EBF7958192A17BABB3791769A955
-:10B560007326C6EF06CF1B2734C77963F69DCE1B23
-:10B57000B7993C0F96B5A375D025FC1318CF5CE6A0
-:10B5800080F705219F0215A918DA5F9D79E211AFB6
-:10B59000083EEF8C346838999DFAF4E2BE61F48677
-:10B5A000B2E69B339CE792153D23B9E2C8E6EB7403
-:10B5B0007F56BEF6DEF8A20D7FE7CE7F82AAA9985D
-:10B5C000379B80D61C706E17EB07EB5562BD581287
-:10B5D0005A1CF5D4189FA75DEE147EA1576E7DA569
-:10B5E00093E2F679F0B443D0F30574CC97D1F64DDD
-:10B5F000C3F86F57C44772B22B98FB1EFBFF2CF6A3
-:10B60000B9E4A48AE71FC90FBB8FF68DC6B1974D69
-:10B61000BC1FE9D65A95FC6091FAFD543E6AFAC8FF
-:10B62000FACF871FFB3E83C1721EFF53BDCEE9BB1D
-:10B63000DBDC46F9B1D74D558DE1F22D426BA6C545
-:10B64000316F425B73761CCF6B876AF8EF61D8303D
-:10B650000FE26106DF863CFCF13F595ADE2D008087
-:10B66000000000001F8B080000000000000BED7DB3
-:10B670000B5C54D79DF0B93377EE3C813B30C0F082
-:10B68000BE8310D1623A28A2363E2E0F0D3E62468E
-:10B69000C4A809D6D13C4A2218B436A11B1B2E02DD
-:10B6A00082F8C2266BCDAE4D47A22D6DD31653DA6C
-:10B6B000358FF61B4C74ED635B626CE2F6D30613B8
-:10B6C00037AB59D365B7CDD6ED9736DFF9FFCFBD90
-:10B6D000CCBDC30C68DAF4B7FB7D4B7EC9C9B9E7B2
-:10B6E000F53FFFF37F9FC77C4AE4089949C8EE2DD8
-:10B6F000840C151342F8B08DB808D95762B2433A9A
-:10B70000284F4F1AA6E987F0B7606C6A6DFEDB1907
-:10B71000553322F9CEBC442E48FBD999F73819A6E7
-:10B72000A9F5831612A0EDAD3C91FB69EA96C960BC
-:10B730009287E6E55B7C561F4D5D24C3544ADB953A
-:10B74000DFC2EDF08DED7F30E711EF5BB45DBA4CF9
-:10B750003220ED2C17324C3A787ABED04402749CD9
-:10B760008E72612DC0690D7F9E480991F2274513A5
-:10B7700021A9F47B5D8F2CC3FC08C90824C03C4977
-:10B78000468DAE5E0F47D6F4178F1DFF10E087B6CB
-:10B79000DFAD96EF9BF3CEA17B29FCA22C95986997
-:10B7A00037FB06AF92FC69341FBE2A73302F0F9906
-:10B7B0006E2763FB817A3E5A2FD11B241B00CEECEF
-:10B7C0006112A4E327160D1398BF43229249C27E4B
-:10B7D00010FEA4D92344A1F592E60E7B9569BA7EAA
-:10B7E000FE608E09A719E649D7D1D15CEA2F48211E
-:10B7F000C4D63CDF5F40D725811F2222ED2741625E
-:10B80000F88F6EF7CF490C3F1A5E7ACA6F490AC6A5
-:10B81000E87F747D5BCEA4F1165DBEBC670DE0DFF2
-:10B82000E2092A30FFC4D90C2F5A79A2344C643A69
-:10B830006E2261F324A5443E4693845285C0387439
-:10B8400048593F9F07547A7C409D0FFCC969588F27
-:10B8500010FA29415E74D57C2BE479F256112BFF46
-:10B86000D0477041DFB2A979F3D87CBCF94C94EE93
-:10B870006A21E42DDD7C6DD974FE5ABFF4DF1E0B06
-:10B88000C900FC7E54BC09DE61A407EDFB3675FEE1
-:10B8900016CF30E2670CFE8A19FE9CC50C7FCE28BD
-:10B8A000FCED55DBEFFD2F86BF513C71A63540877F
-:10B8B000D178D4EA578CC2AD205DD276847C0AF26E
-:10B8C000816AE0DF1E3BCB1F12EFAC06FE00BE9A82
-:10B8D000805F08C9A44D7AB82E28CF1545ECDF7AD1
-:10B8E0001F9507FA7C50930F6C5C97CF5F4D283DF6
-:10B8F000139F891CA328ED9AAB7861BDBA9153229E
-:10B90000FDFFA33809EB774A8289FB244DCF2C4CED
-:10B9100007B9D966EBB1C17CBB2C3DD84F5B8E49D2
-:10B92000EC8D21DF4EABF335373B671C9D111F8F2C
-:10B9300066810463F1FDDBAA7C6B1B7CEA8C99D2E7
-:10B94000072F09929DC20B4CFFB6B6BEF9B43DE974
-:10B950001FF2F9609C441CC7A5C2E52A349156DF4A
-:10B96000C4701E57E98A6FB68F0B270F70C69033CD
-:10B970001A9CED00A7273E9CCE9C0AA453BED985F5
-:10B98000E30C8A125B0F4B936D239D9FAB35496A85
-:10B99000A5E92EBEA9AB0ED2210B5168150B91CF94
-:10B9A0005450B8F969D309A1FD745C9A659B04B43D
-:10B9B000DFDC43023A391F74042F89B43F5E0C92D6
-:10B9C00020859377293280F1AC4A07DABA91A264D4
-:10B9D00042E6D0F182FC0C90A7CEA080A9D68F467B
-:10B9E000274E8B4CC462E8C7248740DF416773222F
-:10B9F000F5E6BB19DEDAE6860354F691EE129EEC0C
-:10BA0000A09FDA8B28BD24D1BC45EEAAA3F8E87E1E
-:10BA1000D5427A757CA08D9BEB66FAC74E6A93C2BD
-:10BA2000D0B7F9B037388E3EB603DE68BBE60BBE42
-:10BA3000EFBCA2E115FE15133CEF38917633809FE1
-:10BA4000DF27C5AB4DA6F8FDFCAE45FACE2B3A7903
-:10BA5000D54C98FE20444A5F312D7EBBDD2D6446D7
-:10BA6000416124BF870F213EBB5DBD5DF9749E8A95
-:10BA7000DFE42FA4EB45B24B0D788A4E096965725D
-:10BA800070CCBAAE96C2B47D779189B702BD1690DC
-:10BA90009019F092ED41BED4D635E8607463F13070
-:10BAA000396976C998DA008F20EFCC7BBCE3C96B8B
-:10BAB0001BF0490C3C16B9291E3FF1DF0F8F1E37D2
-:10BAC000C1D499509304F8232FEF22D23400C3C875
-:10BAD0007F5A3B8DDEA3E75FFDDF7CFE1A9DC4AF7E
-:10BAE000AF68F6103F48AB660549A89BC37CC0967B
-:10BAF000864D29E854A5D8C2ADA09A72EAFA334E11
-:10BB000011D0CFEDE23B36145DFE0F53C6EB9F27FD
-:10BB1000EF68F83447C6D3E3C7047AE78C25748C02
-:10BB20008BE02941FCB47790DC089E9A6C208F3A18
-:10BB30005D5BCFF84A2378EACC7E4EDCA0A3F72BDE
-:10BB40006285E2A6F8D809766D0C7972AFBBA21DAA
-:10BB5000CA05536C797E48956B5480F30BE9380B1A
-:10BB6000468C789AA7E2697EFA3B8FC134A994E4A7
-:10BB70000915C815017F15E0AD6A4D00C882085946
-:10BB80001F7C2288F45025025E3865B2E943E78DB8
-:10BB9000E32F1EBE5C1C09C482FB19B1E6881BF4AE
-:10BBA0004931C59BCEFEA08421A27CD4D6C5E5999F
-:10BBB00080AED8BABD7C31DDA4D0AA9D5E5308FC0E
-:10BBC000190B69EA02BC93736602765A5A3803CBA2
-:10BBD000ADDEFC10E8BBB4B09DC8E82788213BADC2
-:10BBE0007F70ED5D7ED443D76F23614A3728CB4009
-:10BBF0008E65CB61B0A779512A374B30CEA336F092
-:10BC00006F3ABD354984D9DB24961ED8E20EFE007A
-:10BC1000D68DBF3E1FFB33D998DCBBD1F97C69655B
-:10BC200022013BC07E810B812E3BB0727ED77029F2
-:10BC3000C8CD841E2B4DDB78250C7A4CB96097005B
-:10BC4000DF5B0B95DB4D342DFF95BD88A7DFBB383F
-:10BC5000871FF0D05548979CF6F3BBA79C2142F371
-:10BC60003B572E1F49827E8E9A25287FF2C3A64F0E
-:10BC7000823D65FB603FFA8736D53F247CD32C5844
-:10BC80003FFB479413BBF91EA4FF5D05D36D7AF902
-:10BC90009EEA080E035EB4BCDD4BE5DB0CA4A7B73F
-:10BCA00086293D99148E7C48E9D3E6DAE63D25C124
-:10BCB0007CE9778D3E7C917A11BE35E63D14D760E4
-:10BCC0006712726431D8919D206FD06E250A07EB00
-:10BCD00096C1CADF3FB06231D8A19D76AD7CE562E6
-:10BCE000599F57FE7006F3AADDEB4FF6EC82FA9EE1
-:10BCF0002CD2C4F01320AB74F64C41328FEBD6E754
-:10BD0000967FEFD6D9CD1A5D761530BA7CF9626789
-:10BD100035C8CD4E4A975609E87097C14FD6528D17
-:10BD20000E3B0B189DC5C3BBE57A0909EBEC408BB4
-:10BD3000A707E9D1E609A01D1D5D7F450AB363345D
-:10BD4000FAB77909F2834D0A3E753FF287CB0FECC3
-:10BD5000672D68221CA5138BC8FCE189E6110F3EF4
-:10BD60008DFE3B0BF215A0D7F745E227E3D4B75C75
-:10BD70002FC5F96C71CB93927578F4E451BCC798D8
-:10BD8000CF5792D97C3A027581FB69BF72BDA4205E
-:10BD9000DF7889BF1BF412257FB03BA9BDF9C9E448
-:10BDA000543D9E983DA2F5AF704D8316E0730F6D24
-:10BDB00047BFB6939714587A8B2764E0EF2FA604F9
-:10BDC00067EBFBE145E61F2E34BB4CE423E0673F05
-:10BDD000F5CBC293A99FD82262BAA7C58B69578BAE
-:10BDE0008469778B4CC256EAFE90EBE7EF053BDBAC
-:10BDF000E540F826A28B8E163FB66F6F99CDFAE11B
-:10BE0000343A9FBA0BE8C261D2F8C4BF0BE83CC910
-:10BE1000AC959761BE8763E58F242F58AC14E37C03
-:10BE200050EE754D30AE395486EB77F3FDABF25BD7
-:10BE3000C5DFFE798F54E703FDBD6126FA38C618C9
-:10BE40007A09B3F16EB4FFAE6C13CAD3FDF3769EDC
-:10BE5000F1D1BCE575DAFF78F4D8C3FA8FDB9F0621
-:10BE6000EFE02E84D74AD7DB4EFBB38A4CDEC7E324
-:10BE700087E8F9D294207F7808CAE9FD836BC9CBA3
-:10BE8000C09F7458BB087C1A9021DE25B4531CFB5C
-:10BE900041DF06C2CF80BEB571E418CD0B2ADF505A
-:10BEA000B5AFBC4CFB11641BE9A6ED06E7DD45A070
-:10BEB0005DE72B360A13A5D3947CB417EC85B5A4A3
-:10BEC0008DD6DB596D2766FA3D69FE1A02FDEDFC41
-:10BED000991DFBF79D9982FCBA4B647C34A11CF23E
-:10BEE0009A4858AFC76D8E483E1FE4E57D24300D5B
-:10BEF000F9FA693D5F533DD90BFC24902A8570A067
-:10BF0000871FF0333B4451E569E05832DA81016C18
-:10BF10001FB10B9B8808FC7ACE1CEA06BFC4DC80EC
-:10BF200046DF22F361DB30F2B5BC3CA38C10170373
-:10BF300081ECF287492EE025C34C6D31204B818482
-:10BF4000A9DEE8A1FF007CFC85AB17C8AD84A4AFD7
-:10BF5000110CF3E02F382F996E05F8587D4D0FF135
-:10BF6000171A1BA13E4F74F5D19FA94B1ACF2F8CE6
-:10BF7000B6E30793557FD0497240EFB5B79C206F69
-:10BF80005B22FDF05171252DD5ECF9875358DC6209
-:10BF9000949E2446DF2F503F1DE8B1E31766D21B65
-:10BFA00083BEAF27FB0CF66E46D014991FFDF795A4
-:10BFB0008BD68A8306FA1C7FFDB3EA8DED739A1C3B
-:10BFC000063CE635271BF23E25D3507F5257BEA1D3
-:10BFD000BCB067AAA17CF2A1E986FC94D0A70CF5BD
-:10BFE0003FD15761C84FEB5F62A8FFC91335867C0C
-:10BFF00049F86E43FD1967361ACA670E3D64289FDB
-:10C00000757EAB213F67F8AF0CF5BD41F1E409E067
-:10C010004F4A8F668AAF5D19CA21D09FC36DD48EF7
-:10C020009BCFEC63D0B7249BA8F631554C694057A1
-:10C03000ECAF1DF400C8F93D8F85BF807AD2E407CC
-:10C04000FEE50B16C91BA15DBB68225E9D1C911607
-:10C0500011F85EB1C78DDFE5D256E40F81AA0D7BE2
-:10C0600022E86DE37A10F376D20FF0BDC1E0E3452C
-:10C0700025A67C12B28DF46F25F72405C6B1FB2CE2
-:10C0800092B1FECDD2BF2F45A5FF1C4AFFE689DB4A
-:10C090006B74FF90499E9CC2FCC3AA731E83DF830E
-:10C0A000781DF57B6CA41DD8A9BC6E24EB14ABAE37
-:10C0B000FA3756D3879FB871FF269ABF684A714EE8
-:10C0C000D7C9CBE4B566DF8FD587330CF65974DA60
-:10C0D00096F810CA3B2A17CB530C72315005F31354
-:10C0E0007819E5A2F6DDD73715E57297C8EC944EBE
-:10C0F00089F2E538F88A96CB5F4E9698BF18473E8E
-:10C100000B54CE82C2DDB9F2D35D8037791B41BDBD
-:10C11000447510CAD9E8FEA95D7537C2E965F4A473
-:10C12000F9439ABF65A3F203FC2B9B44105F568A28
-:10C130002F27DA478FA27D49E721817D64F550FBE7
-:10C1400013F43DB53F99BDF9E7B52FF361DE7AFBF6
-:10C150004FD5972187DC94921ABFFF17E3EC479DD8
-:10C1600049D6FCEEFF9EF427A718F1A1D1A146679E
-:10C1700056203A3ADEFB125B77DA2291D3F62F246F
-:10C18000F84F10E9E5D4ECB34A25AC5BD0255BA9A8
-:10C190005EDD37BB06DB0993780272266178C33215
-:10C1A000D093A494C90985FE03F4E62836CA0D5B32
-:10C1B000941E15401F278ED5BB9A7CD0FCF389E4D2
-:10C1C000CBB752D438D92C324B2F5FE2F9E19A7CAD
-:10C1D000D1F0B0E0831611ED8E0F68B9664FD07EB6
-:10C1E0002C397C00E2CC829FC84762F0DFCBAA5E8C
-:10C1F000EE3B6997812E5D6B04F4B332FDE172C8AA
-:10C200006736113FE067F670980469FF3FF4B0F5B8
-:10C21000C8F48738B0CF332F873880F3A085C58521
-:10C2200032B785387DDCE89AEAC7FDEEE2A37E5896
-:10C23000F78A3C17F2E9671713A48F21EFC69E72A5
-:10C24000D857984BFCC03F2E0F4F32217FDE1A4249
-:10C2500079E21F51A8AF4392E944614DAFB490E930
-:10C26000F751FFFDDD161BA6D75A444C2BF38A0766
-:10C2700017D07A5B7D0E8C1774E43B709CCE5C010A
-:10C28000C7F98F9C87F2C02EF8758B17EB773DDED0
-:10C290005404F184CE93FF8971CD083D53AC7901EC
-:10C2A0009E30EEF710BEC90BFBBE49F20CDC27ED49
-:10C2B000B404FF7103C413D70AFE6331F837E9E50C
-:10C2C0001FA19F0CF8013CB4DB195EACCE26BF1B4E
-:10C2D000E2FD93C8FA15B1F854C513A530B340E98F
-:10C2E0003789910611E686DA1241AFFA493F059B7C
-:10C2F000583A421CEC8790074509E245D9B6D02050
-:10C300009467D78BFE36AC4F705F415B278B9D04E3
-:10C310008EBBA05E98DB42BFBFE811D9FA0D8570D5
-:10C32000DFFD37176E1FCC21F1F97B4F4BF5D92A72
-:10C330005D3CD64562EF0BFFCB6D15160FEDF77622
-:10C34000806D26ACF7AC71F5E38DF67BBB8753E3CC
-:10C350001393D3C15E6EE663DB996691AD0FC47F24
-:10C36000C08FDE5A28A5BB5DFA7E183ECC279FC73A
-:10C37000F57116B3F9B77DEF8DCD8F513AF977DAB4
-:10C3800010E255AF5CFC0CFA8FEF254BFBC1EF526E
-:10C390007E6C26B0CEEF7D7FD669589431F36E392E
-:10C3A00093CCEBE249EF7DFBD5320BEDFFBDE75EB1
-:10C3B0002DE3510885101F5A79E387AF9541FC4A58
-:10C3C00068FE4DE6650AAF52418A9A204F0D68E635
-:10C3D000876E591A1E076F07D31ED802F1C2509BF1
-:10C3E0004BE4A8BDF625E71F05A0C766809FA60FF2
-:10C3F000DB4676727489B9F4779754D1FEB6728AA7
-:10C40000E2E2006F8A15FC0A72C1EA07BAD95AC87B
-:10C41000F4E5D607C59002722CDCC4C8DDF65AE6F6
-:10C42000652A87ED3F0DC11900D2CE052A13207E63
-:10C43000378D20BDDF76AD290FF695DD44C8073A6C
-:10C44000B498CCD8CFC84567A817E56FD32C9043D4
-:10C45000AD171F9D0CEBF57B55BE6871B73453D3F8
-:10C46000813A1FC4DDFC1877DBCDF7639C3EDE7C90
-:10C470009D5EB6AFC0571235DEF5DBEE7076841EDA
-:10C4800034FE8A6EB7B785F861BC975A6C98BED0F7
-:10C4900022627AA2C58BE9F75B244C075A8A30EDF9
-:10C4A0006BF1FB0B2C00E76C4C3B2C647D40476729
-:10C4B0005FF0B0FDC87B92CABF0074FE24EDF73276
-:10C4C0006DF745DAFE32AD3FAF366C86B8CCBC11A5
-:10C4D0002A2F2528EFC2EFFB697F506F6CB9AD049E
-:10C4E000CA4BABFBC380C7D262FA9D407F7D587FA9
-:10C4F0007FCB093F2B1FAAB450FC96FE96953BE7D5
-:10C50000D27E68DEA9F643C72F61F567637F745C4E
-:10C51000CCC7E8B784C173A224163CD1F5A9956FA6
-:10C5200026548F88F0BFE0EF59240EF75138123EA1
-:10C5300006F2F882B51CF4E79E12926FA2FACD9231
-:10C540005AC041FEA966229A4BA8CACBA8D9554E1B
-:10C55000A09D8CDF95557CE8980FF513F6ABE9A705
-:10C56000E4EA30EA9D243FC937BB69CAD381A753A7
-:10C5700054DF4722E70D503EB13CAE076D2756937E
-:10C58000C8790332717DAA5FA2CA63D3DB474D210C
-:10C590003EA63FF771701EB1835F4B7DFD7E924BCF
-:10C5A000F3AA7DF645B5DEFE7965491B21BFF8810A
-:10C5B000A7200EFE1BE2E5603F7EB47D943D77B878
-:10C5C000E54C5A55A1AA1440DE6F138FE8EDDC6CE0
-:10C5D00085D2AB8E0F7A9AF8EA5E8C2F04336A7498
-:10C5E000FAADC312CCA0CC4BAE3FF18F8B413E8055
-:10C5F000BE06393D7784E9F751BDFE5B261F357BCA
-:10C600004250D76B9FBCB12D01F7D3A83E92C0AE6C
-:10C6100008920ADA3EB17CEBCBF09D9418BF270854
-:10C620008C8F32BD210EF2999EC04F3CB0DF907CC2
-:10C63000487E86CEF7B7035609E8AFEFE4DA7A888A
-:10C640001B3E4C12253BED27F3A54B02C0D1611ACE
-:10C65000168008473CCD4B786A0775089A9CA486DB
-:10C660000F5DFF8E34552E90DF7757D1FA074DC1FD
-:10C67000AB54578ED63FE8086E813CFD936D54AFA6
-:10C68000EF1D8DA36FEB96294DEC55E3E6239ECF6E
-:10C69000762BD990A7F5DD2CDF4EDBEF750F794DAA
-:10C6A000349FC86DE93E930379ADFE966E85B6BFA3
-:10C6B000EA61E700882BE803B9379A17693E41978A
-:10C6C000E7599ED858DA77F23F05D0431D6923A772
-:10C6D000B3009F3FE4FA41BE36BEFCF541C86FAEE1
-:10C6E0002712C4E7324F1CC175F8AAB97C04F0D6F2
-:10C6F000D7724644431DFEB475A176EA142FC17863
-:10C70000B210E242F960BF15F798D07EDB4E49B017
-:10C7100004F0DD9506EB5C91C6FC812921DA8F8E51
-:10C720007FA650BEB34E0775651919D6FB5BC46F63
-:10C73000027811E5F01FE57F2F01FDD4375B714CC6
-:10C74000A5E36DDAC0FB5B25D03FA15601D6FF04FF
-:10C75000877AC2772663C73768FE5A7F4A2FF81B4D
-:10C76000961D8C3E37F9FAD3A6D3B4C3CEE86293B4
-:10C770005BCDBB8DF976D59EF4BA157732FDBEF947
-:10C78000C4815C3000AF1E9B857EE4660D1E720086
-:10C79000E1B93A3827E9363ADFC69FB2B866E340D6
-:10C7A000C912987FE31E13013F6EF300A5271D7F7A
-:10C7B000ECA37C284FA6F3907BA6F2943E02070BD5
-:10C7C00096DAE9FA7E3D5F16015FF569B7EEB6517C
-:10C7D000E7E8EB823805E8A13EAD7437D0D3A6393F
-:10C7E0006F213D26A596FEA49AE2EBE8DDD54B40ED
-:10C7F000ACA599185F5282433967766F43FCFF6B93
-:10C800003919B1BA119DB8CF9907FF47E19B2CCADE
-:10C8100015505F5C465D22A053217012EC10A5C23A
-:10C820008671D20A711996E7AE21A66E0ACF112938
-:10C8300039B99536B517C826B053F2030E8C7F9AD6
-:10C8400013AA76803F7AEC1CCB47D6E912E2C55199
-:10C8500014EAB7D17E6E71F122F8226966D906EB2F
-:10C86000467979E85829F00BB303942F1663BCE797
-:10C870006022A97F8EB63B6ADAD8FD235AEF68B2F0
-:10C8800087805DD9C171EB6BF07BC5D4AD743D8EF3
-:10C89000AAEB6776FB4558AFA36E637E2FB7F141D5
-:10C8A000C0DB23A92F2E81F9A559E59E140ADFE7E5
-:10C8B000525FECF666209EF36DB4FC737FFD42B7C9
-:10C8C0008DE2FD68AB9C29EAF293FF40A536CEE3EA
-:10C8D00005E453DEFDC587808F69F98F6D54FF7EB7
-:10C8E0003D59B307587941BEC6D7D4AF9D4DE168D5
-:10C8F0001DCD2BB622D8F78AD4AFA27CFED5A7CD0A
-:10C9000044EB1FEC09C79C7E9BC38CF3200EB067E1
-:10C91000A6F168CF38DC6C5D1D53F2D14E3A6A67E0
-:10C92000F81AC93161F922F3B322C407AC53781362
-:10C930009EE5214D01D0CF7C364F58BCF7B03C4529
-:10C9400082B029DB1FE47A56A07F682FD2ED071250
-:10C95000F0638DFB877C54BED03A9C61A27AD87379
-:10C960006105974BFBFB6CAAEA2F7A4806C4631F4C
-:10C970004D6572E6D18072BB45021A1B66E75649C7
-:10C98000603AA4E9EB0AD2C73BBF32F65C4018ED2F
-:10C99000B23D2E938AB749BBC305D45E763D27824C
-:10C9A0001CA16A7EC761D06F1E1EE9A610F89FE623
-:10C9B000B7B9591CDED7B7E44BB3C13E7CB5D00440
-:10C9C000FCCF8B7E11CED99527942681DDC68FD2E0
-:10C9D000E9EB4BC240378373EE043F5000FEA59F46
-:10C9E0000FDBD9F9D0910CD20F7161DE2B13FD3E14
-:10C9F000A1C6BF3B5B6C98527FFE5DD01F5FEB22F0
-:10CA0000B84F2078039897DA09077CF1F2A7EEC6B1
-:10CA1000719FE10349EB40DE9E63763D900BC63982
-:10CA2000C24F7010E778DF16488279EF771BEDBFB1
-:10CA3000B23466C776A632F9D9D9C2E2A0C2F54FA0
-:10CA4000605CA7C3A2C923D7D2F05CB0E783788E1D
-:10CA5000D61ADC2683BCB21145117571725BB631F2
-:10CA6000DE255CBF95C58752D938D1E70D5C9CD6D1
-:10CA70007FC1EEF1FC032D8D3E9FD04C02288FC864
-:10CA8000103BF7B06D57657AB2AE9F6D9C9C2E8EB1
-:10CA9000431F0F5F379390EE9CCAC3FC8800F37965
-:10CAA000F8BA80DF897738B115F66528C175C33AC1
-:10CAB0003EFF5DD44B0ED213860373568853E8CEE7
-:10CAC00085122F3F324AFFF911FEC07D752E067F79
-:10CAD00048C67CF47EFAA3E03BD37F77387F2DC035
-:10CAE0003CDFAB242360871232BC08F8B7B1D28197
-:10CAF00071EA87498FCD06062EDF23EAE3C58D0351
-:10CB000097123794E23E960476F0C32F951BE254B9
-:10CB1000DAF9302DBFF9C4068C1F3E7CF49A30B58B
-:10CB200014C118B2507FACD1D673C69A1FA96FB783
-:10CB300004952CA0FF975AE52CFAE95B00279CABE3
-:10CB40006A9E340BFCBFDF8AF519802727AFEA8F76
-:10CB50003536D41FED76EAAF019D5E9C8CFA9416B3
-:10CB6000F3A09FB5F15778181D8EA8FE7C023533CF
-:10CB700001BF1D8EC01566B41399A7F64E47B24685
-:10CB800037CDDDA0FF0E0A11B908933DE860F9E446
-:10CB9000B4E6EE76A687B1FEC893FC6EB0873AEC99
-:10CBA0006ADE43307F50E8413F41F9BE5502380FFD
-:10CBB0003A027EF007951D5324D02755E92E9C8715
-:10CBC000E5EFACBD200F333DC1AB60B7100FB38FA5
-:10CBD000DE4BBD904B5C31FB19E16EA41FAFB11F62
-:10CBE000FB5C36FE7B9C39B0A334528FB60FE3B9A1
-:10CBF000807B6C18FFD1EA1FB618ED642D9D92C69C
-:10CC0000E20C204F80AFB5EF42F03EE45F2B69426B
-:10CC1000FEB57A8DFB451A3F0BD7A718E297DF4A7E
-:10CC2000F5E1FA687240B85E8CE59D2A9DEE847D40
-:10CC3000F471C7498E33CE0C9413F1C72953E5081C
-:10CC400051E3493C9E33D3F824BEBC30C671A3E502
-:10CC50009F966AF2EF884AC7FF600F2E4CA3FFFF32
-:10CC600050A87F91035B076F85F5F9A36AF716F566
-:10CC70001D3809E47745945B5353E13C957C1CD205
-:10CC80009BE59BFA3436DE5839C6E20FDB1E945022
-:10CC90003F3FC3FB1DFE1870D75F771AE4577EAA8B
-:10CCA00084FDD5F30ACAB1FAEB8958FED1FBB793DC
-:10CCB000D08CF1FA7761F968FFFDACFF973FF5E39F
-:10CCC00083B3A1FFE3169355E7CF6D3BBE301DE262
-:10CCD00095DBEC542E1BF95606BEE57D64D40F029D
-:10CCE0003EDFAFF945CAA2DD5573C16ED5F1F96CCF
-:10CCF000B0BF22ED79BACEFB1D5AFB3B77833D34A2
-:10CD0000A6BE33AA7EBED6FF6AEC3F1A1E4D8E40E9
-:10CD10001EEC2DFE0F560D3E9443074C51FD8DCA5F
-:10CD2000A520F6B7690EB33392FEBAFE270A0FF4B8
-:10CD3000172ACF023BEB4122C139E768BC27A9740F
-:10CD4000587F7D92615D23F8BEC5F0FD9F5BBC24DA
-:10CD5000A4E3B7CF04B72D027E4BD2D689283BB1CE
-:10CD6000DDE12C12D2F1DDFFC0F151E1B82D0E1C36
-:10CD7000F3FFC270F80C7C1981A3C0F0FDA3C2615F
-:10CD8000B65DCFBCACCB5B4492A5CF97846D599771
-:10CD90007576CB8C33A2213F73C86BA83FEBBC6484
-:10CDA000289F335C6428BFED8ADF909F3732DB50C9
-:10CDB0007FC175D9902F278B0DF52B6D2B0CF98525
-:10CDC000E25A43FD696A9CFC76EF0643BDC5D283F7
-:10CDD000867A4273CA77C07E59F0C1021BF8173BAE
-:10CDE0005DA6EA10C5CF4E3E684B8E211FCBD47E88
-:10CDF00047F59D370DDB2F149BDA411E2EA4AE7034
-:10CE00001BB5D7D2EB02EDA0F7AB45229AD16F0E3E
-:10CE1000B1F8C9072BABE0FB9D8B89D8ED8EE46F91
-:10CE2000FF2B42206FCD96F15C9BBDD884E7067640
-:10CE300017D78CBBFFB04FB5DFF744E9FB51FA3190
-:10CE4000B3F393D1DF8BD3195D1D58B08FC03E81F2
-:10CE5000CD15C27B3E8353767A21FFA505DFF6828E
-:10CE60009FD135E5112FD04F67CE570DE7F21C0546
-:10CE70006C7F26BADFBF55FB2DB8FEA80DF4E7EE98
-:10CE80006C86CFE87ADAF9F4DD361637FFB8E6B902
-:10CE9000F8639AE7E5746667EDB68530FEDF5DF40A
-:10CEA000F1C07FAF3ACE81058F1306EFE3780EB95C
-:10CEB0002B4790F47A564BE1DE28CCA7D3B7D30B9F
-:10CEC0007AB7CBF788C1FEB7C27C628C63F3323C81
-:10CED000ED163FDEF93CFE27CF6767CC7D775B9C84
-:10CEE00079156BF3F2AAF7283EA6793DF5179E5700
-:10CEF000581D2F359DD9A7BB25C64749E6C0CFF39E
-:10CF00007DF1F92F69B6F19C5282DFE807E417043E
-:10CF1000C63D7F745EC54F3C7E5D635152018ED726
-:10CF20005BD839DB7380479A9E0F4EAA80FB0AAF0D
-:10CF3000C3792D0EDAEF48186F1DD606CD063827B7
-:10CF4000920F25E9F9888FD56B8CED56059CC6F3B9
-:10CF500052EA39038AA7FD105FD6F036669DFF4C72
-:10CF6000788A476F378AA7EEA29BC3D344F49D9A71
-:10CF70002E21BD4C84278D8EE2F5F3FF2A1D2DBE98
-:10CF800071FC20FD7CDCF8F9AF463FF7A64B37C4B7
-:10CF900067FFBFE2E7F11BC4CFE8796B81D4C73AE2
-:10CFA00007D2E915900E27734D6717839FBDD88C64
-:10CFB000F1B3D70E1734927C7D3DA6075E5B36A990
-:10CFC00011CF8F553BF1ACD65953EC7E5F53F1F145
-:10CFD00090D7AD9EA7F3A782DD7BB67AE5B8F322A2
-:10CFE000CBCCC6F38BC411999F99F64BA40A8C9FA6
-:10CFF00051BC1E1B67DDB5758B37DE8DAEDBD9EA04
-:10D00000B69B5A376D3C8AA798EDEEF6E6DF10DF47
-:10D01000C309768637761EA0EF7166B7F701BE6941
-:10D02000BFBF84A20CB0FF09C6FD56AF493F02F056
-:10D03000BEE665F1F001416AC47741562EDB0DE78B
-:10D0400051CEAD727310D2D0E038A6AE67595D6C88
-:10D05000BBF339B53CD29E2393A5B1F58EA876CF0C
-:10D06000AA3A0EED07C2CB39FA773FFE21AA3CBAA5
-:10D07000FD4BDE442C3F17E73CE6B7D4F6AB6BC75D
-:10D080006F4FEA53F0DC1F21528EFE3EFA285DA955
-:10D090007CB0C21BFCBE97D67F9D0B7EF973104FF0
-:10D0A0009DE2C2F33D84273ED8F71FED8797F1BC80
-:10D0B000C6E54686F7E87E75FD85BDA9F1FB8B8741
-:10D0C0005F6D5EDA78A524807E1DA926E27E36BEDD
-:10D0D00019CE39DC59499A707C5E427852DEA4FE42
-:10D0E0009C2F421F174CD23ABC48A3F633F0FBCA20
-:10D0F000A5D0CFC05993B8C3171FEE78F2E09F5464
-:10D10000FAF198833BE05C0159CFC53CB7F72BAFF0
-:10D110001DEBEDF78EEED7E338B73C19B448B4DF1A
-:10D12000BBD4736784047356E8C6DFAFCE3BBA9DA9
-:10D13000C7CCF6C7C91B66C45F5FEF4339B1F8E7D8
-:10D1400035D55EDEEF2D32F8C7B5812D16B06B6B8D
-:10D1500097ADB0482E289718DDA970F409C19C122C
-:10D1600057044F71E58F8A9F81F3413CB7B1BE9957
-:10D17000C373C7C5DB19FDADDF3E686AA4E911952D
-:10D180000F57C03E93AE3F77069B5F5FAF2317E01C
-:10D19000EFD39FBFA0707CFA10C1B89D2DE3E93D8D
-:10D1A00010B71BE6881AE7332D87FD8661755FACE3
-:10D1B0009096B702BC55A9C8E7EBB7AF403FFF96C2
-:10D1C0006AE6E70F0804CF01BD392F2104EF1D10D7
-:10D1D0009B3CF828CDBFF58724D2ED8FD0C71342F2
-:10D1E000781AD0476A5BE073B1E2D35206E3F3DF0B
-:10D1F000BAD83E5E3CBC9C55E5A956AF86972CB18B
-:10D20000EAAFAC36CA350DFE146BF83D12239E3ED4
-:10D210004A8FA1F1F5DD2F5439FD5A94BF547B3E5E
-:10D22000B6DF3237433DA71BAAD884FA4AB14A7801
-:10D23000B65885C7A3AC467C7EB8948890BFD32AE5
-:10D240003D0DF0DD556B8E92C321EC67FD32A76179
-:10D250005E4FF4FE781ADC4BCA2F60F2F7FD2217FE
-:10D260009E137F80340970FEAB8E28F3912F896462
-:10D2700001FA3EA7E24F83EF1C91136682BC683629
-:10D28000C7E4AFBB543A3A17A85C85E7DFDBCD783B
-:10D290001EE1526DCA72887F2B018B1F8E375D6A2B
-:10D2A0005F9970BF6E5D35BDA7D935E78395E3EA19
-:10D2B000AF5501E37AF5093DB8FFA75490A66394F2
-:10D2C000CE267FF9F2DE59347F36642A61E7DCD856
-:10D2D0007CCF86B2B473F1844FA3EBAE165D350DEF
-:10D2E000637DE56FD8BCD6D58516C296D83D877AC2
-:10D2F000F6CDA2F9860CB7BAEF387F1EF0EBAF9AE5
-:10D30000C7B707A2E9E996271D867CD97922E07B79
-:10D3100014DB62EB87F7B29C6C5F87F7E7C23AAC2D
-:10D32000DB1EBB9E3BDB85F5AEFED15C1FCBEF3E2B
-:10D3300090C5D6637D3D17539E1FC84A60E50DB169
-:10D34000FB5F95E954E59D980BEBB23E0EBC2B328A
-:10D3500013118EB73B56AF83FDFB2B51F655452677
-:10D360008343CA64E72BAFF6BED09106F4B09313A3
-:10D37000E11CD95B6EFF14A0BF0DED97D0CF4F57C6
-:10D38000EB3BD2034F66D0F4EEF3CF9D82FA0375E8
-:10D39000C4CF49F1F5C0E10C4D0F68F7A2357DD837
-:10D3A00063077D04FF0BFBAB1404252919D65D79B7
-:10D3B00008CFC5F43A44760FCA3F536F577F43A551
-:10D3C000E7AB476F6EBDEFA937DA4567C1FEF3449F
-:10D3D000ECBFAB82B4B7948E7B95D25B2B9D0FF9DB
-:10D3E000E0895BF5FA46E38778E3DEA81D78F5E887
-:10D3F000CDD98113CDF36719BE1BB203DFAF7E62B7
-:10D400005FA904F3ECB93596BCD5E4F22F55B918F1
-:10D410004D2F5AFA4B55CE5F098D0FD7670E19E184
-:10D4200059D7648447E38F2BA13607BCAB45479F90
-:10D4300006EBACD9A5A46AE60DBD17120FCE5FAB03
-:10D4400074F2AB66338F72EF2887F1E95F353F9155
-:10D45000182B6E153DFFAB264A0F401F4FF3287F58
-:10D460000AEB379C4C9322F4F87F543CFCA974A837
-:10D47000C9574D9F44B7FFAF4A779A3E9B88EE3C11
-:10D4800071E28F07326C88BF0DBC28C0FED1810CC1
-:10D4900089E589B8C80BF6EB6C76EE9D4AA85C78F6
-:10D4A00057E26AAF03EF8329DDD650215DC72BBD5C
-:10D4B000B74DD1AFE3EC4CB61EEB1BDC3B61CBFAB6
-:10D4C0008AC9BF381DD6AF86BDEF71EE7CF2A2745B
-:10D4D000DAFE892113BC9045D66DDB6086F9CDCC90
-:10D4E000647A64FDF657D1EEBB59BA5EDF64D4E7C7
-:10D4F0005FCE10553DC1ECF03BA95D00E708E3E1CC
-:10D50000A13093E1E19EFAE3284FEFDDCEA13CBDCF
-:10D510002593E1E35E3E847299B433FB99D8283EAB
-:10D52000A85CBA0493007CFC35C7CE77F30141FFB9
-:10D53000FEC6FD7B562F043B309A3FBEA7E2E92B87
-:10D5400099EA3B84E9C13B33D13F0C70D0DF5B9F4C
-:10D5500067F0AEDFBE05CF275FCC50ED6B953F2F58
-:10D56000C23ACD8CCC2F459DDF05C7C836D0179465
-:10D570006F4C78BEE47533C275F5ABDF6C827AE22E
-:10D580005417DEF7423B96E6FB9627845A75F13A2C
-:10D59000CDAEC9F7337EA8E565835DD890E933D871
-:10D5A000E9D1F6C6FFE80396F6A878FA4BE983C3FB
-:10D5B000AA5DF0A7EA834754FE8FD60BA37CBC93E9
-:10D5C000F1F1A5F3FFBE10F2D17CFCADCC8FA69794
-:10D5D000A2F9F74AEFDD48D7CA1222161AFCA39C1B
-:10D5E00010F8C1A3F41FF1933838DFF644EF4FA6CB
-:10D5F000419CEBD2DED5EB628DFF4416B3B33626E9
-:10D600004A267C1FF2754667D17222BADD285FC4B4
-:10D61000892FD6D6CC41FFF05CCD6DB970EF2DDAF5
-:10D620003F18539F935357817FDCAAFAC7FBACF591
-:10D63000BD31E0F566317CE6178C9C027CBFDFC013
-:10D64000E17D62F8D3DBE9779FF7FF60581A0BEFB3
-:10D65000685EF34FB6B3F1A2C779575DB751FF4487
-:10D66000A1FE09C5F370AD3911CEB16AFEC9B0F2A1
-:10D67000E7F54FDE2423FF300BD6F9686CB81CEABF
-:10D68000FCAF08C17D73281C579798FD0AF08B8961
-:10D69000B6D3F925D1EDFEA8CEE7CDED37298FCE53
-:10D6A0001BE3C9F1F86D14AE3F91DFFA84911CE0E1
-:10D6B000FB378F7C70F15198CF1107BE3F16DDCF3D
-:10D6C000D7B2CCAA7FE0403ED0F4EF80D0B3F905CA
-:10D6D000DAEECD3B32FD3B888E2F08E50BFAFDC21A
-:10D6E0001F295FF851BE211FF7F53AEB63F9298333
-:10D6F000AA3F141DB7117BBFD1047EB14CFC167D2F
-:10D70000DCE90D75DD7FA1CAA5A22CA63FEFAA5DBD
-:10D710002140BCE8FED1781141E7429C9A7D04FC8F
-:10D72000CBD7D47B02CAC68498F1DE992A5E278AB9
-:10D730001FACA933FAF577D51AE5C73BA1FC513DDB
-:10D740005238CE7E9446BFF1C6BB51FDD117BAB94F
-:10D75000FD8089E6F7D9AC1BD31FAB48D33C8C7353
-:10D76000D0F581B496344D7B81C2F3CEA19509608A
-:10D7700047FD82906AB4E33FF8EC34BD5D1254F18A
-:10D78000FC7EED67EF00727943689A164BFF44C741
-:10D79000697E118A7D2EE32E55AEBEA1DDA7B82B82
-:10D7A000763C7F8B3AEE1B75E3F34D74DCA67699DD
-:10D7B00071DE4A16B387DEA86B7304995FCDC6FD90
-:10D7C0001B362EE82DBD5DAA64FD79F4E330C4EF6D
-:10D7D000619CED84403CA54F50A6EACF5DA5643323
-:10D7E0003CE4178DBF0FA5EDA768F5A2EDAC9F67D0
-:10D7F0004A867BB3B5CB8C70B569F62D11310E72AC
-:10D8000015F4A527A22FEFB4FA1F043A202E09CB56
-:10D810004FA878BFBBFEDF2C307F2A3F3BF01EDBDA
-:10D82000599308F2B3EC7CC8A2C7CB851BF4AB2E8E
-:10D83000A8F6C2447234BF6804E5DBFB2117DE8F13
-:10D8400078F30BBFB3C4EAB7F67A96E11CF1FA405D
-:10D85000ECB88A98258C8B6731CB88BFF5D773F1EC
-:10D860005C703CFBFF10C8AF99608F1EE9D0DBFFF6
-:10D870004F6549AAFDAFCA339ED9FDF1E2AF432AF5
-:10D880009D4D147FD5F4B3562F7AFDB5345A5F0EF3
-:10D89000ABFC1C5DEF52D68DD1DDA81D1387EEE2E7
-:10D8A0008DABF91F5ADC37BF98B68FB12F33661C8A
-:10D8B000B55EF4386F46ADCF183F224EDC2E299B63
-:10D8C000E13718276E9794CDE2766709D38B4AC863
-:10D8D000897AECCAD17BF781B9F7C0E2CF9D06F512
-:10D8E000D6A8C66BEAEA5F3D057EAAE65744ECF18E
-:10D8F000601BEC935DDDC1A1BD113D4EB45DDE0842
-:10D90000EF15822055E307456619E3D4E43176BE6E
-:10D91000DFD3BC1AED4B2D3EDD27047624D0EFB7C4
-:10D920006CFFB76DA05F353FFE2D8BFF411667661C
-:10D93000F6EE855E17DE73DD3AEAFFF931DE38CAAE
-:10D94000FF6AFC71A2F518953771D6632279132FFF
-:10D950002EA2A5A3FB2C8254F80A9C4BE512FDBD18
-:10D9600034AD11080F78A859CEA19F5923C84B3167
-:10D97000DEFCAAC90479DF72DF6E3807BFB2DA2293
-:10D98000DBA5C8FE4BE96B0D85AF807F41270C7E80
-:10D99000ECC02FA57F82FBC1AF2FB64BB03F727694
-:10D9A0009E34E8A1F9B3777022D83D558BEF374FFD
-:10D9B00083F15671F80E8DB399A8E7B56F5D5E5986
-:10D9C00040C8370044DDBD8F1A6D9F4659BB0FEE2E
-:10D9D000CD4E4D1D30B9284ABF7B78ED3E1B85AB3F
-:10D9E000A335E085FB78F76597EC83FB786969F2EE
-:10D9F000D0026A471DCC9EB11CF2037FA3F557BA33
-:10DA00000FEEDFBD680AFA385AFE83EC65CB79D891
-:10DA10008F98A48DBF1ECBEF5AF2E0B16DB4FFB763
-:10DA20000F6F590E67D7CBEAB4F11F595EC953FA8D
-:10DA30009FABE51F4B84BCC74922FB4CB309B144E3
-:10DA4000EEF7E179F781D1FB7C2DCBE1FCF8EBE53A
-:10DA50004D95708FB3ECCB1DFB8AA710326B59B973
-:10DA600028D3FCDC9C2F2F77C2FE31A1F448F3723F
-:10DA7000CE57107E8FD9A4F61FDA2767033CCA540D
-:10DA800028E79467F655BBE13EC2F06920CB879B3F
-:10DA90007B6C69867B098A0CA68970A23C9C85E018
-:10DAA000A8FBDAD9E169ECBE9D9A2F62718AD1BCDC
-:10DAB00097E50776C4BE7FF2610E935F038ED8E5CB
-:10DAC0003D2ADF6BFBAF49E789FC6C0CFEFF3CC4D1
-:10DAD000FD6746F8E914C4433CF8E45C532BECC3FF
-:10DAE000DA189CF1F671F7A9E314B426E13B45CBB3
-:10DAF0009A9CF8AECE243F9337948BF89520FFCDB7
-:10DB0000268433D5CCE17B26690E123C4ED3D41447
-:10DB1000F6BEC9328A6A787764E1A4C0513CDF9BC3
-:10DB20009E51D206E7EB5A7FCE831DA6B51F0BA7E9
-:10DB3000B805E04C35D7946C29D6E1AF98C14DD7E4
-:10DB40005D6D277F13DE7B19189A9A0F767565B67F
-:10DB50006488CB940DD558E05CEAE51C554E48AC82
-:10DB60007D6A25932B235BD4F72A6CFE12435C5FFE
-:10DB70009D7F65E7B22F41BD86210B817388DB8EC7
-:10DB800097E33BFDF1F8BF01CEBBEBF476031FC674
-:10DB900073E60D70DE7D06F4F75301CE37423FE0A9
-:10DBA0001FC0BD0EB09B52DB62AFB716576EB8EE0A
-:10DBB00026CA0CFD7786AF48FF1E2C9F685E91FE3B
-:10DBC0008CF7F8C6F6A7DEE7D3F0CEAB781762C3C2
-:10DBD000F9AA469714DF261D3DAD52E98B4A3F7CDA
-:10DBE000D7F7C2F2E25EFD7B0584EC60E73A78BAD3
-:10DBF0008E604F0E39F07DE0329EC9C7B2A16451EC
-:10DC0000E1C6D285B6AE03C94DF83ED1C80A2EE6AC
-:10DC1000EF0F9CD7E052EDA7F4BAA079830E3E8DAA
-:10DC2000FE23FD0F7D41E38F75C8B77B197C606FC4
-:10DC3000C03CFCE169FA73201AFCB753D981E7496B
-:10DC4000DB54FCDFE10AF57211BC8DC57FD604EB15
-:10DC5000998BE5654327059867431C3EFD650E3BA0
-:10DC600027927E3E9C08E703966633FD35D03FC37E
-:10DC70007E1BF0C53213E124366FB033CB34F94A42
-:10DC8000DEFB590595AFE9A3792A5F2558875179BD
-:10DC90001BB6D922F57F9AF3DEF276AA3F3C567680
-:10DCA0001F8CDA8F36A2BB8768CD61F1DBD9C1D872
-:10DCB000FBD6C3390906B9F5547325799BCE6F6538
-:10DCC00036D3E7B387157C2749E3EB68B95498C38B
-:10DCD000D6D197C3ECF18F5F2E7113C8A515AA5C3E
-:10DCE00062E5C4136880F234937A2F4164EBBEF18D
-:10DCF00047330A210EB7D56B96E09EC34ACE9FF3F9
-:10DD00002D3A4EAD4DEA489022F4514B6C920BF0F7
-:10DD10004D47807BAF35CBEC98873FB03BFEBD874E
-:10DD200063F447A4A4DA71EC5A0D9EAD5E01C7DB23
-:10DD3000B8AB3029A887930F3C8BF13DA70AA72DDC
-:10DD40004A5FF1C67C5A5AB8D164D695BB98FEEAB0
-:10DD5000F6CAE539605FAAE79BA2EDA27BB23983E0
-:10DD60001CD6ECA2DF79199F50FE45FF319DFA8F3A
-:10DD700004EE7BF407F03C183C605488F775D9FB3F
-:10DD8000C66F1D2773C14FD2FAB92BA7D8D06FDD4C
-:10DD90006ABA489FA4CC69AB942FEBE4D919F57DFE
-:10DDA0007A4A0F33815F57E710633B73201BEE9570
-:10DDB0009374AB1FE4CD29217018D757246E58DF18
-:10DDC00085E62D87912ECCC4DD86E7A48E60FBEA24
-:10DDD000BA9152B4533F308741EFFC3C3703E339EB
-:10DDE000A94E46B7A7EC4DD88E275232CA1155EE30
-:10DDF000FD3C770ABE7FA1C9CFC87D16AD1F567EF8
-:10DE00008A5B910DEFC49E4A9D5CD2C619ED1DB090
-:10DE10007F22F6D2F3FB6EA7FC38ABBA3F4C61A66B
-:10DE200052E5A5E58FD2FA5B7298FE3BE50B0CC07C
-:10DE3000B8A7DC4404F8670F079F85FC62AF13DFC7
-:10DE400071D3D623CDC47E1F264DFDFD15E01348AA
-:10DE5000C55CC66F8773D93ABEA3E6D31263FF9E33
-:10DE6000CC7FA8F57AE0FE1FADD75D1EFBDEE81E75
-:10DE7000958F1B6D3DD570955E77CF13EF2DF38495
-:10DE8000DA55B4CADE1CD60FD56788AFCACE3AFCC5
-:10DE90003DB1F78756E1BBAEA3BFF301EF54D17597
-:10DEA0000F9395FB01EFC22FCC787EB3C3C2E8522B
-:10DEB000700745B88794E28CEDEF7E578527C5CC77
-:10DEC000DEEBD6EE2F58D4FBFCC7547B2CD15B8BFA
-:10DED000721DDE58937CF02EDB08DECFD5D631FAEA
-:10DEE0003CAE45BDC77FF3F643491CFBA1D4603F60
-:10DEF00068E346DB1117E13D6E5DBC7B9DF7DC42BC
-:10DF0000A2ABFF6932DC01FD7D7A5B96212E11CF39
-:10DF1000FEF8912A6FC15E5062C22518BE5FA47ED2
-:10DF2000A0A21FFF0A1B3F32AE9328BA71F7E6C8C2
-:10DF30003FCEC1F8CD5C11DFB1B0133C0F5BA6BE84
-:10DF40005F47F513BE5748F55235C86FCD2F02BE57
-:10DF5000179380AFCBCFE6A4EAF4A4DA2E5A1EDDE5
-:10DF6000A1DA0177A8FA26E9BC66373A248E8BE855
-:10DF70009DB17A8B53EDE868F918AD178C7635A50D
-:10DF80005B456F078CE11715AF374F1F93E2D0C782
-:10DF90002D7F11FBB26C6ED03C0DE4663547601FDF
-:10DFA00064569551DF3B7299DFE1C8751ACEE1D610
-:10DFB000D419EB25423DE0AB5CE70DF9297A7DC42D
-:10DFC0009941EEB1FE36ABF4E07BF7AC00EF372EB3
-:10DFD000C965F650499E9C9A4BD3237FA8EC83DFFA
-:10DFE000A11869E549AF07DAC97DC31E98974D04AA
-:10DFF0003FB57C6D55D1115A6EF9A905DF9D2427D7
-:10E0000062FBF7AE664EBE8FF273BE2AE71A3C6C17
-:10E010005E0D9EB05040E1C86C60F064F70F72BCBA
-:10E020004EEE65D7B37AC5B91683FEF1439EC2772B
-:10E030006BAE16BF0CB5C2EFA164D7CB3CE8BBCC2E
-:10E040007E8EA8EF6EE27BA9997ED6BFCB1FE2EE53
-:10E050002D8ECCBBCBB4A218F445579AD30FFAE25D
-:10E060007379C1329877C3857018D036EBC2100F20
-:10E0700076DFFE3C79167CD7E62799C54CD81F770A
-:10E080005E60F0F544D13F21BBD575E965F0B9027A
-:10E0900025004F5AA284EF10D1BF7CD0AB69C9AA2A
-:10E0A000DE482341782F88D8683DB0831CB49EFE9B
-:10E0B000DE260994C23E412875DA74D0730B1DFE2A
-:10E0C0009336D0AFD37DD3E15DA1170EC78EA7D70E
-:10E0D000AA7A87C27FA71EFE78FC31FADEBA5ACF31
-:10E0E00012C78FD6E8DE591DDB5EA59A00CBCBD7D1
-:10E0F0007AEE86F934B40BF81B5D1ADEF7E70536C5
-:10E10000E6A6C23A1DE1805F33FBCB91AE32159E8D
-:10E11000805DD1EEC80DC13BB2EDC99F4A07FCC777
-:10E1200083BBA1D92CDFA7E7E77601D7E348D4F971
-:10E1300035CDCF782C97E9A3D37981AD30FEE613A6
-:10E1400007F09CE083472F09E3BDEB73A378E3EA74
-:10E1500099FFD2B086BD9751BE96473ADCD42EE0E7
-:10E16000BBEA0DCF1E0FE37EF17682FBA00DFDC74B
-:10E170004FC33BAD590DF24CFDEF126435B077E360
-:10E18000D212467F1F5400BD9DD9BFA201E95A2477
-:10E1900022413A0AA2DD956D63F6A886DFD34238A4
-:10E1A00017E267A74DC4DF46CBAF59942289E6AF8B
-:10E1B000F91C7E787FE1EF8FBF213D067886B81885
-:10E1C000BC7B9017FC12E0A3BB959D27EF5E48ED4A
-:10E1D0001E5A6FA1936C85FCC2361701FEB8513CE4
-:10E1E000CC8AA28B59DB199FFC283751E55782EF67
-:10E1F000291DCF4D50EDA8601DDAAF741E9D731020
-:10E200002E9C87982B7F15E9564CC671331BC29CF8
-:10E21000FEFE899646E84A7E3637F566E0ECC77D15
-:10E22000C64DAA9C295F7B947B5B47072FE69A919A
-:10E230006E329F3DC2817F48CB5B177AB03EC607E6
-:10E24000339F657ED3265A7EBF41AE6CC0F97439C8
-:10E2500098FD48E5CA4980EB94690BBEEF776A3AAE
-:10E26000C17766EFB8103E8DE25985F794C0D6931A
-:10E27000A77868A5F99FE54A38FE6921781FACFBAD
-:10E28000E94C76BFBBCBB403DF3BD5F83E9A4F7F5A
-:10E2900096CBFCC9CC3547398827789CCC9ED4E0F6
-:10E2A000D3EA95E4559C05FCCEAA1E423C34AEE16F
-:10E2B000D97D0D159E8542A000FCB461B5BF93AB1E
-:10E2C000BF6D3E44E16B2CE6909E9FFCBB57912EA8
-:10E2D0001B7B38F6BB413DAF0AAB74FED5C1EFBD29
-:10E2E0008A7A65E9008B1F340E1CE7EF7581BE3911
-:10E2F00089F4D948E9CF5E0AEBC6ECD86B96702E4C
-:10E30000E8CB68FA745633B90831D742F60E1CEEE2
-:10E31000FF86D6DAD0EED7E4AFA8C209EF08827C38
-:10E32000FD8DCAEF5AFF117FD5EE07FAF6BD3BFD12
-:10E3300024BCEBD6E8E7FC701EF93F46F50993D7FD
-:10E340005222FC7660A4FF68FCE5E631F91A438F9F
-:10E350007C184B8F687AD6F77405BE97ACAD1FAFAB
-:10E36000E27D54BFE7B1FB578979BC0A8FEC853851
-:10E37000B644F9B9BB14DEF50B144B809F54A71FAC
-:10E38000E23B7FEF7E5DDAA0C3D76981F23BCD9F90
-:10E39000CE77203C942F92F274EBD750CC7E67EA74
-:10E3A000C9EFAE40BC36C0DA51BC3604EFBB0FF14A
-:10E3B000EC25E231902F4126BF1AD6DCC5DE05D709
-:10E3C000F4DF731CE2BF4171E13BD74BFB57207D6B
-:10E3D000128FDD5FC8A15CC375D6F84CCCD5F61D95
-:10E3E000D8BB43D4AF6F857889E6D727D605940488
-:10E3F000692C9FA6A87EFD4CD5AFB7CCB6FD59FDC4
-:10E40000FA4DCD3F41FFE721EF8F30D5F884FA8DEB
-:10E41000067EBA2D8FD92D929A56E431BEDC54DA9D
-:10E420008FF4BFE97213F28FAB9AC911D705A3FC21
-:10E43000D3E260D4836374E8EC5F04FB110BBFC2CA
-:10E44000892007E2C1FD19AEE967705E851C67E7A8
-:10E4500028167CF0F344FD3BA435798CBEAFF599CA
-:10E460004918F0CD3709E3D9BFF1FACB0957CDF9F7
-:10E4700027BA7EFFD29784E782AE3DBBF2F3905776
-:10E480008E26E139929C702DD2C535CF1C3FD081AC
-:10E49000A78DE1E95A7F25D2CFBBE99209DE096B4E
-:10E4A000ED7F623EFC5E74BD0AD7BBDF3537031ECD
-:10E4B000767CED3BF3E15DC94D212E05EE9B5DEBD6
-:10E4C000FBCA1F41EFD51F7D18CF7DB57DF37FA11E
-:10E4D000DD6D0A1D61DFFB9244A877F59903F30116
-:10E4E000BF6DFD6D58FEEE3347307FF26BDF311F9D
-:10E4F0002A8DD0F1BBDF3DF2C3DF433E9088F77237
-:10E500001A824F3E0E79529BC8EE5D055F11F4BF33
-:10E51000DF75F0F820F2A146174BFB39F5DD30012D
-:10E52000CF7968F4FB56457119F01DA550BF793EAF
-:10E53000CD7727D4C78A23EE51E7DB00B408E3AEDA
-:10E54000E142C0075D82D287F25CECCF0579EE2C08
-:10E550000E0BF02EE9EABAE3F3D9CF10B662F94A0E
-:10E560001B3B2F368DF20BBC1F457B3BFA21C4F7BA
-:10E57000BA1E5C07FD1D3613D19C118177B320A113
-:10E580007FB4B986F3530E231CD9762A15F6C79AA1
-:10E59000897AAE8BD5EBA2EEA52D19F510B1D3B4C7
-:10E5A0006C5BEC38E893792E953E19BF660EACC8CB
-:10E5B00006F9413C567FA12FD25FCEF9A66E78DED8
-:10E5C0003FB37E6811CC6349D18619300F0FC4FB6D
-:10E5D00040BF282EECBF11E293949FBEAACAC73455
-:10E5E0003180EF8CD8E4402AFC269B640DE0396E24
-:10E5F000697DC0D20A72861FC95D858AF09861FF65
-:10E60000F0A025983113FAEB52F5D351063F6D8FE8
-:10E61000FD4995B207DAD3FEB13F5B9DCCE36FBEF7
-:10E62000D9D83AFCEB0F6E3F668C9787C6F45FEA49
-:10E6300002FDA2ACC17593049CEFBB5015F1ADDC9B
-:10E64000AA8F6347C77B409EC17EEFE9BCF2C1BC85
-:10E65000D448AAC581A2F1CC4BB49CF65321C998E9
-:10E6600092BE1BBB77A6C9EDCD7B54BDFBE22594C2
-:10E670003B9B833CD3BBC1CBA877FFA545266F53FB
-:10E68000C3F2E0F39790BEEF3DC1F4EEE61325022E
-:10E69000D0B3F61EF2E68A6BA87F153341BADE2CA2
-:10E6A000F49FF642FFDDC44D2D7BB279FEF02D20A4
-:10E6B000FF7EFDBC7D0DB43F653221BD9DEAFDC4EA
-:10E6C00091364E0F1FF303B8FA10F2E366D52E28E9
-:10E6D0005F7BDF01F0C71AEBD9EF116C1E50F98B8D
-:10E6E000FA6380DFCD275E45FAD1EC5EDFD3354893
-:10E6F0006F6E4A6FF8BB095543081FFDF317D2D45C
-:10E700005DC5DEC55D52545206F47672F50F778210
-:10E71000DEDE5C4544E8FF608EFC3CBEFFFB3C87D0
-:10E72000EF511EB4F454C03DC9830B2511F8637337
-:10E73000B076543FE1F9EA60ED00F28F679D1FEC7F
-:10E7400087EED620DAD5DD194EB40B0E3EDF8AFAFD
-:10E7500073B3E4F0C3EF992C3DC16DC5F68A8B30DD
-:10E76000F839B4F397866EC3735B1A3E96560DE77D
-:10E770003279C1E0FEB565E8D330EF5F7FCF0A6F35
-:10E780007E8FD2DFFF05D640AE560080000000002D
-:10E790001F8B080000000000000BDD7D0B7854D5B6
-:10E7A000B5F03A73CE3C1226939327E1E9C90308EA
-:10E7B00098841308EF872704102BB583F2B2220E3A
-:10E7C000C823424846C48AD77E37830331526F6FCD
-:10E7D000AC2FEAA576A06AD12B106DAC51030DA821
-:10E7E00014ABB5D1528A16BDA3222F918CE083DEE3
-:10E7F000D2F2AFB5F639C9CC640262EDFFF9FFE998
-:10E800005737FBECF7DAEBBDD7DE9336D9BFF18E85
-:10E8100032802BD561BAAC03A42B6DBE3B3201D242
-:10E8200000F435986FB07B9D3A9647FE430A6DCE53
-:10E83000C5EFD3C0081501E4DF23192137408A262C
-:10E840000164516A335307C008C0BF0691AA811200
-:10E850006F31C027B5067C3800F84FCB0658CEFF85
-:10E860000058B1A8D5A1617F554F89FE329D46E978
-:10E870002D989EA3BFCB305F013778B13C4B966E8D
-:10E8800098C1A98D53ABDC4A8799F3C87D64E1BD7B
-:10E890005370FEDFA9043D0987E85D88DF310F7EF4
-:10E8A000080DC0F9F7AEF4F6D5A83C73A92E633E67
-:10E8B0002B03BE4FE591350ED82C75ED7724AD6B4B
-:10E8C00004D5F39649582FAB678A1EA4A1E4725B66
-:10E8D00012B52B95F4CD1AE5AF7E14084E59BD74D0
-:10E8E000EA072064C2C15B66C37A47B353F4F5F408
-:10E8F0003DF407E56A84C7244DB5CA4BA99DE601DE
-:10E90000585FDAD96E4ABE97FB9BD233490FE23C7F
-:10E91000A737044A204FC0C1EBEE8443684DF2DCB8
-:10E9200050143CC6131CB07D6830CC6D2C22F87B93
-:10E93000ABA89F6C9B9EB11E3715DC81926B526811
-:10E940009C20C36B00CD03D329B83E3FF59BEF5D00
-:10E95000C5F0C84AD113C163CF25021EBBE76C9333
-:10E960003760BDEA2229E4C4F9DDFFE28C525A6720
-:10E97000F54CB70E98AFF6290B695C08B8E031CCBE
-:10E98000836FD1BD53305F5DE9D5D76BBCEE455485
-:10E99000DE3733495F8FE50F3E2F1994AF0EB84332
-:10E9A0004998BFB259E04375F3D3CA8D98F620BC9D
-:10E9B0007353BB40C98CE2CEF900ACE1F9544F3A35
-:10E9C000D1FF656C1F9041972762DE111EA8E3FA04
-:10E9D000AB27860712BC4E3E9F3497DABF62B30561
-:10E9E000689C57365FBA292875EDE7A4DDDB44EB58
-:10E9F0003F89EB0F60F96F9FFF7388E8612DD28329
-:10EA00009C837BB4462BA7F2F55340A57DB1F66BF2
-:10EA10008F23504878B5272F99F183E6E945381FB1
-:10EA2000A77FF602B8F5126F8D8670AEB6B5D629FF
-:10EA3000D46E4B06C018CCBF70F7409FBB2B9CB167
-:10EA40003DEF8B4B01C65F57A847281885572E17F7
-:10EA5000D2DA304E036E4C7BAC16F089EFE74ECD28
-:10EA6000CDFDAC7085F7E0CE41CDEA065736E29198
-:10EA70002F59E3EF49F680D107E7E3682E6FED8366
-:10EA8000E5D9E9F81FDAB7CD3D42B46FD9D9E07BBB
-:10EA90002641BFAB4C3CB3F6A5211D182FB33DA2B8
-:10EAA000FECF4DBAF98949975BCC348A2E62F1DEEC
-:10EAB000EDCB253E919D0CBEC604E359ED717E5C05
-:10EAC0006ECD0B5CD84F26B5D36C8CDF717417CA32
-:10EAD0002A1E4674372559DFED227A1A963B2C08F8
-:10EAE0009DE320247267A474C5035A07D10FAD8B30
-:10EAF000E8ACBB7A0DBB047F8AC7CB674C3AA9222E
-:10EB00005CC7796F93901E13EEB3E8A7DE966B7B1C
-:10EB100010E7FBA3FD32F3D9F87A56BAAB16A0750D
-:10EB20001040DEC66B53BDC5DDD7DB66D6FB71ADCD
-:10EB30008B53B7AEAD51B0FFA12D5AA90C349E3600
-:10EB400089C60BE078B4CF2913E15319E1E319DD4D
-:10EB50005078672EE179E35C5AD750256C2B25BE9F
-:10EB6000EBB5416BA1E0DFE7F0FF3DE72643ABAB40
-:10EB700033DFCB971E93EF53D93BA67E3F7F5E4C8E
-:10EB8000F925AB87C494E70686C5E4F3EBC7C6D482
-:10EB90001FD03029263F68C37762EA0F0E5D1D93B0
-:10EBA000BF74CBF763EA17372E8C299FF48FFCDDF7
-:10EBB0003F253CA7F527E073561AD17279FF8636B8
-:10EBC000C7AE3F7574ECFA158800D1FBA4E4BFEA28
-:10EBD00089E8D94A5341F92C6CB5233EE0D26C0F39
-:10EBE000E23CCAFF2C87D627988785CF567E922293
-:10EBF000C78C6BF1890BE1579EEFFCF8F263C217EB
-:10EC0000E779E6FD0F39215DAAB9820F28E0E5F525
-:10EC1000A74E9C7BDEF5DBE3D70F1AE3BD87D69FBB
-:10EC200000EFE3D79F3A3A761FACF5E7F90637874E
-:10EC3000B19FCFE74A2C5FF651D198AEFDBD1BB70F
-:10EC4000CED9AB52599F01EF3509EB77CEE34E9EFB
-:10EC5000C7F54EF02782C374130E95B982DE2F4498
-:10EC60009FEF9BF3F81FA24F4CDD6B73991E619FC2
-:10EC70001C1A805D2DAC9776F544BC48F7B9592F26
-:10EC80005BA8B44269949CBFDFA4EF074DFADE5045
-:10EC9000AB723F0FD7E670BAB156E3EF8FD416725E
-:10ECA0001AAAD5F9FBE6DAD19C3E8AFA18A58FD7C5
-:10ECB0004EE3744BAD97EB3D593B97D3A76A7DFC70
-:10ECC000DDDA9FEBCDFD016F06CBB3F8F5CC5F9598
-:10ECD000182F412EE2F6F391CEE4F3F0B52EEDE5D8
-:10ECE00079A9E7C3A3D50773B7BF1C8507D7E5A6E6
-:10ECF000641EEE81FF1805A3CEC9176EFF65ADB681
-:10ED0000FD65FB85E9C2C21738FBE18044F5AEA77B
-:10ED100031C722BFC9DDDC1070770F9F4E3C8AC31C
-:10ED2000572FE22B7E2D21D9DE8BCAC3BDA3C7F995
-:10ED300093B9CF567EE64C81AFF1FDDE6FE2DF2C5A
-:10ED4000C24F2C9F1D47AFA77385FC3C9D2BF4F44D
-:10ED5000FDDDF08B7B726DA6FC14FB3E6B9FE04BE0
-:10ED600077F6983FC197605C294F8BA1CFD9336369
-:10ED7000F771BF5DF0B7FD7F92436B12ECFF85DA50
-:10ED80005BEB896FF72773BD9FFE7F466FFBAF4D2F
-:10ED9000617D7EBFDDD72F2B6A7FF65FDB636EA2BE
-:10EDA0007DFFDF5CBBD8AF421548BE433A18A407CD
-:10EDB000E192020ED2E5A0403D4C7482C610D145CE
-:10EDC000F778A9C0618B9E64826712EBE39FCF4CFA
-:10EDD000E1FD079F6A4054FFA0A8AC976EFB2EEAA6
-:10EDE0000A349E82E3A11E0ABAAD73FFF2E8BFC9DE
-:10EDF0009DFC5AEE9EDE2E8407161F994D7CE43C46
-:10EE0000F2BA6BBB8BE32387888F5CFACDF3118B4F
-:10EE10008EE1EC8D03BC295DCB67111FE90DF0D3AA
-:10EE2000DCB7998F7C6D3859746BEA13F1FCA4DB65
-:10EE300076CD9917907F263F57FCF561C48BDBE4B4
-:10EE40009486F5D8E42EC5FF73CA07020A3C86A94A
-:10EE500073F5E9DE878673B7850AD71BC2F69D5323
-:10EE6000F1FF32CCF6A053A57A0FF5F8F7ED945FD9
-:10EE70008D1CD389E99749FD4380B640699EE03FE8
-:10EE8000B2EB4CEF4351F3B3ABD0273A5FDAEAEA87
-:10EE900073286ADF86EF5563F223DA7262EA8F3AEB
-:10EEA000A0C5948F0917C6948F3BAAC7E427444690
-:10EEB000C7D4BFEC8C11932F872B62EA57B866C476
-:10EEC000E4A7A8D7C6D4BF3C67414CF915DA4DB1C9
-:10EED000FD157887E7E1BA173ADCF5522ADA69B905
-:10EEE0004619E59393ABFD0BC84E5AE3516122D509
-:10EEF0000E85086E750E97BA1EF9D40792D11F10B1
-:10EF00004FEFB3A1D59D8FF5E530507AD0A697523B
-:10EF10009A676CF1119D6E2F4CD6681F920702B450
-:10EF2000919C52F424407EE2E811F95D01EDCB6F33
-:10EF30006CF01826DB5554F4A97E736688ECDFACC0
-:10EF400064DF15348FF5B606CF1ADA671B781FCB4E
-:10EF500064BCFAC968CC1F7E41B1119E6D6FB1DDF2
-:10EF60003316F39F61F7329637B59DF8C995981F10
-:10EF7000DA66D7A9F65090D94E5CAEC03D4A7AF712
-:10EF800078F6F10F843D15FFFD677982DF6755083C
-:10EF90003B33BEFC8E3C21DF3E76242E5F6EB6AF47
-:10EFA000B86BFA43C4D7EC6D7620BFC5AA2CA32753
-:10EFB0009C4F5F3D930FA1E15179C50BAA9BBE0FFA
-:10EFC000E4EF1577CD83B05BF4437EAC5549464FF3
-:10EFD000F23B7C3C29F13C6E31E7613FD3A39B7E41
-:10EFE0003DFCFDE3BCF3AFD37E2609421989DABBB1
-:10EFF000F97B563071FB7BCCF13F4E4F5C5EDFD12D
-:10F000007F2F086444B7137CA7739CBE5C6E3F934C
-:10F01000068184EBC8E4EF9063E410DEEC423A270B
-:10F020007E519E96ED0024F1F91079C540F8CF206D
-:10F030009300F1145C7A29F12950EC91B04517281E
-:10F040003F1680F201D90B3644C67338B51B56DB28
-:10F050003F0847D1D10C23360F543F4ADE7C427D16
-:10F06000E37A928714A612BE9F022D554D805F56FB
-:10F070003ACF257B95A8F51CEC464F6A33E178B072
-:10F080005762383E6FF2B191F320A1BED696E711D8
-:10F090007659A1DEF37C7283E0EBCB88EE377E1FDE
-:10F0A00032B9FCABC219F182E57AE4BBEE10FB2960
-:10F0B000BF71785BF8DD27062F3EC98F9F777F2EC3
-:10F0C0002FE8EB7D2B8FE58A3690E4629349BF4DA4
-:10F0D0008AD163989BF8185426827F9F7C534F8D6A
-:10F0E0005B771318390BC8AFA1D875E267C932F83E
-:10F0F0009F4E00FFF875A79AF3C6F6735BA93D789B
-:10F1000074C1E7C0EBCA463D9FFE854B280FBC6922
-:10F11000A7FEE7F93DFA7A54813ECF13FAF40208CC
-:10F12000DB890F77819F3BD34E7EDB78387A419B1A
-:10F130002FE55F189EE905C6E7041F9B4BCDDE8ACD
-:10F14000EB9C1FF000F9696E98079E629C8FEFBBE5
-:10F15000E96F185877E155434AD6527AE9F83A9957
-:10F160005B4F66BD4F0AF491CF5DFAD5F5BE3A8F7D
-:10F17000AF90E8E390A42D61384808079237BD8F1F
-:10F180000F5C1005C715FDCA7F9F9F45E7036064AC
-:10F1900090BF788793FD56B001580FADD9397813D9
-:10F1A000C9852FF27DAF51BD51934DFFAD11197837
-:10F1B00075CAC5C30BFFEC44271782976CD2FB417D
-:10F1C0004F62BC19972FF6EBABD24B66BE8043045F
-:10F1D000E1B0B9EC9BA717845F0CFF782D5FF05F5F
-:10F1E0002BB5E0366A5AAC7FF735731DAFE57B3837
-:10F1F000FD22DFCB706EEFF7E9E12492FF0E5C7F1A
-:10F2000002BCF7764337DDADBF3B7AF9A6F8F2C111
-:10F21000E4C4F35CFC2D99E71B344FE2F32589E746
-:10F22000F96F17894FB83F4B5CF9DFFC3CBFC8371B
-:10F23000DEC8A779A6279EE74F2F129EC8EC96B48A
-:10F2400062BDD9C807A9DE373D5F082C984272E835
-:10F250001A9FF0FF1723C7253E845379F4DC70D240
-:10F260006FF5751B88EFACF4E80195F9C81BF982BE
-:10F270000F8281F399394D627F52FB884F97288422
-:10F28000EFD9D09A46FC6AA793FDD9F1EB0F99EB21
-:10F29000473A799CE004D32303899F1C1C98984F1C
-:10F2A0003C1E5FBF3EC2F2697D7962FD749B49AF2F
-:10F2B0002B5C0DD3B26DD1E72BB84099B86CC0E888
-:10F2C00043F2B64C5D4BFCC4817289E0EAE833A49A
-:10F2D00027ED07E6BD12F981735E3F207918DE271E
-:10F2E0003AE097D739CEF1DABD6A81BD7B7EBE5C4C
-:10F2F0007E66A43FC17AB66ABE5DF95176E3F22D0F
-:10F30000AFAA05D1FE7108DB800547C4E6E5F341ED
-:10F31000D36FD0132ECA6F509C29E865453F2FCB81
-:10F3200007921B643FD7BD30A6943617F50F20FB1C
-:10F33000209292CCF222D87B6CA11605CF0FF32D30
-:10F34000FD53EE46AF74C47C7FB7D685266567FE55
-:10F35000FAA3FBA6903E3F1FC2EBA8FEFC553DE87A
-:10F3600008B2639D1DFD9D9162F4DBCEFE15FE5E2D
-:10F37000EE72B7CA433175FF2EE17E6CD58CA304C3
-:10F38000CFB5FD8C63B4CE78F805EE1A9FC67E0427
-:10F3900082DF655DF7BDBB7DFEAB669CA6FE5EE8C9
-:10F3A000A75A7E1D9DCFE392ADF361453DECEA8403
-:10F3B000F757DD9764D3BF88FAC4399AB701557EF1
-:10F3C0009ACF3C8BBEE3F41C2814FE803A4FDBBA84
-:10F3D0005D517478832D9225E476781D3999FE6706
-:10F3E0004712F38FF61DBFEDE7E3F3344BEFE8214F
-:10F3F0009FEBF1D5E767F917ECC989F569EB1C6359
-:10F40000B7BDA880F5123AE71D8D79495B44F6AA8D
-:10F41000A2821EC4F5955F8ED884FD4D92FBB68402
-:10F42000711D9FC3D9E40998FE2788F5AF7AF3A32D
-:10F4300074F2634E52ECC7A3F953BC1F684041AC51
-:10F440003FF914CC4B6D25B88C4F67B86C6F99940D
-:10F450004AFD943C3FB927A5BB6AEB55C5DEE90FD1
-:10F460008A9F7F793776E9B002A177BE9E6C0C2B1C
-:10F47000C0B4BC9BF58F32EB85938D5105599DFD32
-:10F4800051FD44F1106D832C3FAE80EB358105AC0E
-:10F490006FD95CC857897FA2FE2AABE4272CB03312
-:10F4A000BD1BA0A9D9EC3714FB8F7C5DC1FC0433D4
-:10F4B0002FD5BF1DA4761B6FF1F03938F83420F931
-:10F4C0008080E173813AC9CF7E0717C57D60BA5E3F
-:10F4D000D237902E26DB2219822E4222AE017C0AE0
-:10F4E000E57F2B85831427B0D6F5EF3F273FB81172
-:10F4F00054206922E615603F63E0600A9FCBF1CC9F
-:10F50000701E4E6B5E663EC5CCB7CF9A3A6D00A6B4
-:10F51000B7253FE2213C0D4BC847B19F2F93FFBD5C
-:10F5200095E9C69FACDB7B937FE93DCE4B2B937572
-:10F530002987FC4F9E42D2535743B2EEC4710C77D9
-:10F540007180C67568C0FEF86468E475B8DD9F0414
-:10F5500008282AA812DB4FC9BE65056CAF009F932F
-:10F560001F7E2F6533AD3F493DD57A077ECA0083A4
-:10F57000EB65C4C9C72CF72A89E337BC4A9C5CF405
-:10F580004904FF9E73E3BFC7CA4B171C54899F48A9
-:10F59000ADDE9C73C89FDA086E659D706B53845D09
-:10F5A00067C12D30C9FF4B826BE04EA71ACCECDE51
-:10F5B000DF86001A45FA789BBA642BD547C3096CDD
-:10F5C000D45F8E585FA0D229F641F16DA5F6EFD831
-:10F5D0007354B27B2C3C7B68A0C9AFBBF1773C5025
-:10F5E00020F4A3EAF4C3D524E70007B5F50738995A
-:10F5F000727424F10D9497F5242F93EC06C3DB92DB
-:10F600009B2B9AD600D15575F30220BEF28EE41BD7
-:10F61000F032DB23C076D99C6981576C1AF9B26647
-:10F62000AE7363FA49411EE3D7FE57A6BEC26C48CB
-:10F63000761753BBD2CBBC53B270DC6031E8776233
-:10F64000BD60926FEBB3B4AE3765FD318DE2212A18
-:10F65000E0C3E12632E1F74DB333D86F9A5911A9CF
-:10F66000A37881C8DDA0527C4F17FA388BEB1B09B9
-:10F67000F00B1E0BFB59A4B612FEF4427C93D4CEC1
-:10F68000F247A93C5FE42FC37C8DD852C86F29FF95
-:10F69000DE0882479B0C141655D322D968FCFC99CE
-:10F6A000C359AF29A0F2CCE8F2B4E54F61BE60EED9
-:10F6B000049DC849B3F97E762B95BF01BC0E30F985
-:10F6C000F7A838FA1DD749375C5EDA91F757D07C36
-:10F6D0005FB919D88EAD31E56D0CBDD162B1CC18D2
-:10F6E00049F8D7D10F503F15667E9CA2723F7DFD31
-:10F6F00060F205EFC607F89CC0A6937FB24E6A6021
-:10F70000F840C0CFFA1EC5CD10BDF49FB76BB79DB2
-:10F7100006CB1474A7EF157457065E99E03552BDF9
-:10F720003B48E3CF9997CB7C66CC5160B830E5611C
-:10F730007E429AC4FB943F209FF165BC4BAF97116A
-:10F740008F64B9343F09C79B3B4FE2F38959735D1E
-:10F750002109FF390BE983E3A1145FEE6CC4F7398B
-:10F760003E499CFB627E5E943F1EB5613E379BED39
-:10F7700004FFD309F0397F80C077AB7DCD5A478C29
-:10F780007FE792016EE1E71830F59302E6BF22AE03
-:10F79000252BD91B117CA381F9D4611BEADFA4FFBF
-:10F7A00082C1FAF63526BD5BFC6296710BDBC1B3F4
-:10F7B000BCB17AF43BB4274407D74AACE7CE997B77
-:10F7C0007E3DFB5C8164C6DDF455599E99DF35D0E2
-:10F7D000D89EBE9AF49C12FC380DF59028FD7EDE72
-:10F7E0006D67D3B87ECFC7579CBB0451A152F09729
-:10F7F0001A8427F1CBF26B15A697EAB50E8EFFAAF5
-:10F80000695E63CF267CFE21E8025FDFAFEB83F306
-:10F81000EC53658C90B528BF4D554822BACE269E34
-:10F82000C3F08F38C82F37DBA157D1BA66A7831A28
-:10F830004843BCBCF68A8DD4FF5A17A832CADBDE17
-:10F840002D6F8608AF9095EB849388391CD7D657D7
-:10F85000EDC1E70BF5B6611CB755EF49D1A3E3A4A1
-:10F86000D6AFE9C43B8AD7D29C304C35F737919D4F
-:10F87000346480E0570F4AC0F22270AD8BE19C9552
-:10F880002FE295B2527547308DF88D66D5E338BBBF
-:10F8900007EDBE5EC3310DA15A29F647B48BA7FB15
-:10F8A000AC0CB39F1E9A1444629CD9525A6623B87A
-:10F8B000B953748A4FB4FAAD4836ECC4B72A8648B7
-:10F8C00023820CCF4DCA22D24F9362F9BEDD2EF6B1
-:10F8D00005DE157C3F5E0EA21C60BE4F7EFB6019EC
-:10F8E000CBAF8A01592C0FB89FD58A4B75EAD0450A
-:10F8F0009E657A2185FC5CC31064A4AFB7E5786788
-:10F9000050FC5EE07585FD6A6573F5EB1647EDEB1F
-:10F91000E60E391099CFF1503FD4FB503CD4DAF2C7
-:10F92000CE3CC53D56428383F0BD324E3E2E73BF62
-:10F93000CC7AE4B247ED9DF80B1427AAE713FFA891
-:10F940007AAA8B3F88F954273F8BB32F417D89D604
-:10F950003302F931F121A3204566FF32CC13721432
-:10F960001E97C82F267B56D793DC6B97521AE4B2AA
-:10F970004E3E39C2DCAFBB14EF4B141F1B407DE978
-:10F980003115BACA01F0B3FE3211E526E9D152CBE6
-:10F990001C99C6DDB814FBA6F37C255C41F9DB9607
-:10F9A0008A735208DCCCE760E3024E95E8FFCBE4B3
-:10F9B000FE6BCD71FD7664D6C7D41F727F80FB428B
-:10F9C0007A8B44FC10CB7B4FC3A64807E35A8E705A
-:10F9D0007F1B33045DC4EB312FDBDC219B8DF86E84
-:10F9E00080E54E128472087E4681E0B36507049F6D
-:10F9F0007D2E801AB44CAAACFF9AE9B9AC0772F913
-:10FA0000D80870FCCC0EF0559BFACE5D034650B47E
-:10FA1000A85FF071535FB0F4B82971FB78B9FB7E31
-:10FA200085F8D6E5395DF64BA6FEA781C4FAE21546
-:10FA3000DAF9F99661F12588E54BB97096F70FEE82
-:10FA4000DE732BF90982717A50F022F5A05EB9BEFF
-:10FA50005FD0FAE2F5A1EEE2299F1A7071F194A845
-:10FA600041CC27F935D6B2B3E2F0A77ACFF1F9F756
-:10FA70004027DE75E07360D375B40E94E72AD97D14
-:10FA8000D26F1E62BA5E8BF5E4F104CD83C1FFC272
-:10FA90007CAB0DFC14AF003EF534E1A92577911342
-:10FAA000319ED42D1678374A11F9BEA8C8125E06C9
-:10FAB00047C7EBEBBE5CF2471B65C51C1F6BC9E378
-:10FAC000E13683F16404E81954CFC2939161518EF9
-:10FAD000F8F11AF19371D3105FF228CE76541FD249
-:10FAE000BBCA4163FC288F936B15EE990AD17985C7
-:10FAF0002B7EFF0D3E779C6CE2C714F5EBE1C7252A
-:10FB0000841F96DC423DF9AE38FBE2AE38FBE22BB7
-:10FB1000E0C7918BC18FC845E247BBFD87EF05CA9F
-:10FB2000D89EF5CBFDBBE287D472DB927B88DE8367
-:10FB30002940FBFE74925AE1C679D6548AB8F3E1A3
-:10FB4000BF2F08523E7B452EEB854FA7E92F71B999
-:10FB50005F9497B519720AE6F3576139E69FCEF5BF
-:10FB60005650BE66359663FD11FB7C41CA17FC50AA
-:10FB70009497DEE97F2985E47C40B47FE1589DECD1
-:10FB8000C1F2509DD9BEBCA182F235F5A2FDC803D9
-:10FB9000A120E507DF23C6B7F4CECB4CFEF9B47441
-:10FBA000EAA5DBA93FE49F9B917F8E3B61946EC3E6
-:10FBB000FC22D56623BC5D1C09D8091F0EDBAA46B2
-:10FBC00012FEC0425F0EE19993EC56B9937FD9C8FB
-:10FBD000A983ED262A76D6FB5E95FC0AD59B4624A2
-:10FBE000417276B4EE22FE4EF1C89B51DE1499F2BA
-:10FBF000C88ADFA57B0433A2F6AB68A090F356BD9C
-:10FC0000EC748117F0B0C00B2BBEB8F52190C8DFA3
-:10FC1000426B633F449778633FCBEF50BFE2618410
-:10FC2000B797539C31965F3E56C419979E3B3D351E
-:10FC3000915D347CA0B0E78F9AF722ACEF95A15C80
-:10FC40001BD1CFD3843CBD099EDA1F495F7A9AC687
-:10FC50001ACB200DC068DA47912F7FBCEF7DF57D70
-:10FC60000196DAFC0AE111F497749AFF556DFEC90A
-:10FC7000BC9E2A80EFF54AB00E53DE2F093A368B30
-:10FC80003811C17F6699FB764C9DF7CAED6C3F7BBE
-:10FC9000743B8E3369FC00A6FB9973258BEEBF3352
-:10FCA00090F4603AC1607FB68FE3DD6F8290830687
-:10FCB000B9298EEE97BB3F7B8FE4D2F22DB174BD94
-:10FCC000025A1DC2DF1C79E46DECBF72438A4AF20E
-:10FCD0006745636CBDCA0DBF3F209574E50395165B
-:10FCE0001F08C5F2015438041F7868089F7FADCC07
-:10FCF00091B54319E4FFF0B3BC4F0221EFEF52F48A
-:10FD000030D35F8B53D851A67E7E9B2CF4F32470A6
-:10FD100069EE42E2C336335E55E4ADF1212ECEE505
-:10FD200054C3CDCC6FAC78180420CBFB5381CBD51A
-:10FD3000683F5B079F8FA3F7D2969EAD74DFC0F23A
-:10FD4000B3A07EC0F6152C424E378EF910EF9BB44F
-:10FD50000CFF3F86D6E5E0753DD4A33FF3F7D548C9
-:10FD600010CE52B28B95E256EA7388A02717D111B4
-:10FD7000F1F769B1F65612083D7E789BF0E38CE806
-:10FD800094FB75B4BF4ED05D42EE3700D157B7F645
-:10FD90008A7B55427B852514F63F7B9AE0EB17B2B0
-:10FDA00057BAB3473AF63309F5364C67FA92B6D3E9
-:10FDB000BA2F3B9B9A92289E6A66B9EC25BB6CA62B
-:10FDC000DDC84A4FA0E73F60EAD91DF57D6EEE4FD2
-:10FDD000F1656CA7F825ECB795F87FDBEB8E8471A5
-:10FDE000C98AD9BF6237D444FD5F454EA9287FBB7D
-:10FDF000E2CBE67EBF017DE579DA977879E4D81D1C
-:10FE0000774E098181D171054F0F12FC6E4281F14D
-:10FE10009B81744E94D49FF99D568AF6541FCE73DD
-:10FE20007F076FBE9CE3243E03E38271126BA3FC49
-:10FE3000E707D3129F8BBC61F2D7148A7DC3F47697
-:10FE4000CDF8038D7FD421CE5D8E269BA9479C5B88
-:10FE5000BDD3515FF0C788C5276DA2FC687AEC79E5
-:10FE60008D55EF94D9EE50ADCBBB36CAFFAA3DE419
-:10FE7000F4939CCECA37EF71AC02B69FDB9F4FDB89
-:10FE800014BDAF670796A70CA2F8A27CC3D18BE084
-:10FE9000F8BC907FD54AD841FBFBF025BEA334EFD8
-:10FEA0006A0D8C67A81F2DECB8A698EC06111FD21E
-:10FEB0006E1776607B9248AD799D1D382365109D45
-:10FEC000CBDE1C66BED8919F1166BE7776A097C721
-:10FED0006D9F65959BF9FF10790D549DE65BEE32A1
-:10FEE000ED8742752DFB5D51EF23BF4DFCF901C03D
-:10FEF00078A11F9BF19E46DFBFF3395E777E7E9B24
-:10FF0000ABED95FFC2EFF34D7FB0AFF9D357EED015
-:10FF1000187F0ED3B80B4249C071DFFFA45FBFBD8D
-:10FF20005F1BAF677D79A4FFC3651C2FC07EB5152D
-:10FF30002DBF65BEBEC2A2FBA658BAEF65C2F14294
-:10FF4000E76AF1E72DDF009D0D1C9440EFFB35C9FA
-:10FF50006BC4AF29F274E66BA79A24F68768D05673
-:10FF600047705E29897D59F9EA8D150ECA2F0695CD
-:10FF7000F97C533C3FF305494F585E0F2CEF4A2163
-:10FF80003F95E05DB357261F02DFB7D1A2F824DD0D
-:10FF9000B7D1A2EC62BA6F139DA7FB36D1F5E9BECB
-:10FFA0004D7439DDB7892EA7FB36D179BA6F135D51
-:10FFB0009FEEDB44E7E9BE4D747DBA6F139DA7FB4E
-:10FFC00036D1F58F80FFC1F112C175E206826BD385
-:10FFD0001AA74A70C5ED7AAB289BC519E31FDDCB84
-:10FFE00089EE67B967AA6305C2614F8E0CD268BA01
-:10FFF00077B32CA6DFE57215FB0950ED6039E2C737
-:020000021000EC
-:10000000FF313CE522B6933F6F962003F175E986F8
-:1000100038FDA1E5DE3AD2B76F0AC57E5F0E517E8C
-:10002000F7DCAEE7404B0699F1C0BDA137E1F31410
-:10003000D9ADD33E9FDA27EB4E305D00B4CF5B8560
-:100040003FB214063D349EF7D10E218D8E4744F900
-:10005000A98D722890DB793E746AEFAF0EFBB0DE9B
-:10006000D25EB24A74E7CC89DDEF242D76BF7B14D3
-:10007000C6EE778A1EBBDFA9A363F73B1ECE694697
-:10008000ECFE833C9DE1BCBC0F9A77387EC6B45829
-:100090007CB0E03B1AFF27F05563F82E41F83E2C68
-:1000A000D1B9DA3D7BFA685DE15CDD7CAF83F4D7E2
-:1000B0008B85F37D7170FE1CC657B819B830D335E7
-:1000C000B2535F2ADBEBE72081636ADF0AF35EAF9E
-:1000D00038DF31E18AFA0BDB0B51E750F5B2CCFA8D
-:1000E000CC26A267233385F980BEA107EFD73097CE
-:1000F000E86F31F8983F2D8ED36B96BAEF77905E0C
-:1001000013BF4E9A0DF95D2A5B845E13BFDE2EFE8F
-:10011000A842B5B58FE0DB8D0FEBB4CC168B4FFB4F
-:10012000C88F91096D0ED263BAE38333728C5F93EB
-:10013000DC402E06040F610AF05F427DB2A6A35890
-:10014000F8E79D7EE1E787401ACF6314887970A3B2
-:10015000287FFF2825C47E073429D8BF64D963F1DE
-:10016000F084BED2DAB7B05FF92530E1A8CB92AD0A
-:10017000D37F8F56A041FAF5C8CF84FE34DAD51864
-:1001800054B4AEF6F927F9E639B762C67F5EE01CD3
-:1001900092E64F7E8E6BCCF8BB092DA35EA17CC787
-:1001A000B9E4CE57FBD07E8DDFF9FB0C4ADF92B469
-:1001B000C7EEC0F1AF96045EC4DB95C11DE334DA2F
-:1001C000FFCB242FFB2BA682BFAFB047423CAF89A9
-:1001D0002E1FEBB5369761E7F328D37F09109E4AAF
-:1001E0007AFA32DDC1F358AB7E3095FC31CBC1F4E5
-:1001F000C734C7EE5F177B28CE0EAAC2FDA77EE3E9
-:10020000ED9E047814170F102BEF17145AF7CA45F8
-:10021000BC8A06E2FE77A5E947AA746DF4887338B4
-:1002200094737DA18BDDA410E0C7F07985BD90EDBE
-:1002300062B407F8BC5F73248AD7033593CFD56FB8
-:1002400074CF64BE7C637D17BF0EE3F5E2860BAC12
-:10025000CBD413C6D3379CFFE1419A90FBC9D3F7A7
-:100260001A545CD6D63F5A9FAD7188FBB9E0CF884F
-:10027000B9B730B8509C7B97997A53A5CB8453611A
-:10028000A08EF4E30EBDA98BBDF8F5EEC958F12E92
-:1002900008AFA242C6E306CF9ACCCEF31D6B1D9FDA
-:1002A0008C687BBC15E125A74C76117F5CD1CF37DC
-:1002B0008CEAF73B103E4C74036E8DF5F593CDC779
-:1002C000F6CB799DEB423C7B701CADA35956C5BD66
-:1002D000F940DD38ECB7BD54E05DF7F6AF8027CECE
-:1002E000EBB2C2ACAEF3B2E2ECA7C845A9E128BDBF
-:1002F0003DC3845FFB10EF146A57F6C7BE1E9AAF6A
-:100300003DAF714F6FD28B6F157A31EE2BFB41648D
-:100310003B48A4974E91CFDE42F95339A092FD9904
-:10032000D923207B48CF5B00EC2702DDAF13AAC89E
-:10033000FD8AD84ECEBE15ED27ECF7DD5537A6D198
-:10034000FDFEEC944569F96E8A6FC2A90EC0BC64CB
-:10035000F38AFBD9CFBCF76F65543E8FFDD2D73BF4
-:10036000C53973EE0FFEB69CE900B474E7181ACFD6
-:10037000C7EF0B44D2649E5FF9B59F0D27FDAAF726
-:1003800059F730D2CF7AD1392F8274A8491F9755A7
-:100390004486FBDD9D70CACC4F6CBF649BF03898DF
-:1003A0007C72369D8758F7301EEAF1069F879F348E
-:1003B000CF4FF28C69A984E707075AE75AAD59E491
-:1003C000B2AA4E3252E7D03CDF94F97EC567AA91BB
-:1003D0009A86E527C1CBFA63A0CDCEE744ABEEAE5B
-:1003E000E899EEEE3E6E7F4DA1B06FAAE2E2A2AABE
-:1003F0009456079D6755FD9371514D6871273A0FCB
-:10040000B3D65F9DA68032145309BCE7ABF7E23F39
-:10041000E48470DC629677777FE3E7E6FAACFB1959
-:10042000D5743F033FAD7ABEBC279CC70EAD3E33AB
-:100430002EE61E04D96BB4BEEA3313F97BC55D27E3
-:100440001C84DFD40F3D8560DDCFE80ECED985C298
-:10045000DEA8A67B0D19D1DF051D77F69FC9E54FF4
-:100460009A707B72AF6DDAE604F37CBD50D8DD4341
-:10047000B214F6175CDA0AC6A604E35AF5ACF70D17
-:10048000BA9B57D3A4F07C9A37C505271A6FA709E2
-:10049000476BBE4DE9E1255E71CE3A90DE2FE8C88C
-:1004A000AB91FE5747F1D3B3A67FA0E93BE1FEFC39
-:1004B0005EC615C28EED6E9FE7F4F3A5137F18A9F3
-:1004C000B4DEFA4A269B5D407EB49EF35A6D242723
-:1004D0003BF84F37FBDD096739E61E4C57383BB810
-:1004E000BCE3FE19181E299BE410B03EF0D01F4B50
-:1004F0001C0E1CFF980D22C477A6C87DA7BE4079AC
-:10050000B41F882E8FB1ECC07483CCF7998E3D9ABE
-:10051000EF20BB6C49394464E45BC7DEEA5F477196
-:1005200097DA02D424C7A1BAB336F6FCB1128C3DD7
-:1005300029D8EEC603DED456CC2FBA27568E1D7BA3
-:10054000EBC70EB207A4856E3FC515E13CA7BE8080
-:10055000F9C5CD0EBE9FB5E4FEF8FE62F5E06C5322
-:10056000DEC6EBC39F179AFAF048184972E685DA9F
-:1005700066F17E8E791F11F53F23119E587A7028FF
-:1005800079D2DF99EF43A34C7C699C92B8FE92220A
-:10059000B10F2B1F3BEDF068DDD3D971E42705388F
-:1005A000FE895A95D3ACC1866B30F63F60B02F659B
-:1005B00030B697B548FF4FD8CF29CE4111DF385F0D
-:1005C00043F7D448DECE157A8253BEB992F5D13EB8
-:1005D000A006597FF1FBD99F6E43FD248DE2376E53
-:1005E000913DEC6F10EF078DF968511AAD37F3BFED
-:1005F000E73C4D70A53B0E40EFB0941BA5C4DFD780
-:10060000CF70F379FF265B80FBA140ADBB109EA1AC
-:1006100027C7EC26F77941E3BD93C8EE535B76B567
-:1006200092BD526FFB740FC525D44F043DC8D00E48
-:10063000F138352D339EA6F6FD67BA75BA5FBA3E1E
-:10064000D72855A3FAD720F21EE99927AB6CEC37CF
-:100650003DD5FC0B3EAF42FB2E42CAF7A9AA3CF6A1
-:100660009B59713F7CF697C06F7802E51B44DDE72C
-:100670005ED1B4C946FAF8A5B451517155D6BCAA99
-:10068000EE6CCDBE8EE4EE130ACBD1CCDF5CC1F1B3
-:1006900003B98A26113CAF9354A18F9A7AF2B560C0
-:1006A000FD35BC42FAE942D293110F3F94421CAF90
-:1006B00069839667A9FDDC1CA10F82D63882FCD71E
-:1006C000E12AF37DA2E5F634D26FAC7382EEF0A19D
-:1006D0003B3F0FF6B4E41D1CF7A404EC6FAAB14530
-:1006E000FAD3FC8EDB13CBD779834D3E30D01F621B
-:1006F000799E0EEA6334AF025F2ED165B54D5BC9BA
-:100700007EAF7D5E8E0F6997D4F498775ED4865F56
-:1007100093DE5D6353857D73C028A5F398F6194574
-:10072000FCEECB497BB83FF311E47B149775EB13D8
-:100730004D3315845B756FD4BB30BFF9895D3315BC
-:100740007A87272FBCC486F95707FF45940F091FE6
-:10075000A6FC1F9FF848940F0B2FA1FD39F9C4691F
-:100760009127030C11EC6F4FFCEFCC00AEEBB8E916
-:10077000FF043D3C9FE659FDC2205BB47FF1C86099
-:10078000C1378F27897AC773E186AB49FF280CF3FD
-:100790007D18ABDE6B83CDFB0426FEDFF462522BAB
-:1007A000C5095BED202771FF41B3DD4DE67B59485C
-:1007B0007FBFA27A2FE768E9BCCF479147115C9EC3
-:1007C0001FCCE73D370D4EE7FA049FF4A2AEE32DB0
-:1007D00023394F72C01E7BFFADC1DC2F2812FD579D
-:1007E000F756D3683FB2D3859D811B927617BF63BE
-:1007F000B0C9D4ABC4FE64CA6A695065B9339CEC15
-:10080000E697CFF62D65BBB9A29BFB9E83851CBBEB
-:100810002928C689F4D2D4CD7CEF1C0C8A4779B93B
-:10082000396973F47B29274DF81E199C26E0D7B14E
-:100830000F3D251E2768C2A52FC2BBB8137FACF69B
-:10084000175AF7F67FD1BABBEC5399989FB51E8023
-:100850007B051C707E69A8E71F5F63B61B6DCD43E7
-:10086000637AB8E9C5DB3708FEA7A5B3DD0E3F11F3
-:10087000707059E316F1F9E40A530F96036F38C804
-:10088000DE5851DFC6EFAFAD6814EF6D75D29DB184
-:100890002A9ACE32F3C53A33652333C8F488EB6322
-:1008A0007A34CC788358FCE980773C1D77E94F4B4C
-:1008B0008FED4FE3FEBADB87B08917DFD83E041314
-:1008C000C3B383BFC4C1AF831E73CD76458867654C
-:1008D0005DE9F18FDDD171EED71CCFBC77B2E27646
-:1008E000335E558BC5E3154DB9B685459DF5EF6E65
-:1008F000BCD71B1D4FEB6A5A1020F957D352CE714B
-:10090000B52B9EDBFAEB00B65FB6FD010F05531F5A
-:10091000531AB2492FAE7A6C9DC7A0731625E021F9
-:10092000BE792C244F4B747F75D41029461FABA67B
-:100930007F62FFC79FFC5BDDBFE1FCBF9050BF4201
-:10094000785737FDB58EECB73D862B4272FBA81267
-:100950009E4A72F4A6056E3FBD2F58D31CAB4F2D97
-:10096000FBE503D91A077707FAD8589F6AED43EDDC
-:10097000AA1FB5EB64BF57EF93751C066A20524758
-:10098000F38B6F5FD3F8A183E0AAA23ED8775CD740
-:1009900072E4248CF7354D3FFA54F6507AEC1D285A
-:1009A000A1FEA2FC1108F7CA6EF4B2C221B1F7028F
-:1009B0002CF840288BF59BE0130F95BC8FF33AF190
-:1009C000E86B1EA9285A5EDE29CEA91A6FFCF90B26
-:1009D0005AF772F524E907CEAE7A80D62C0925BBEA
-:1009E00045A455F6560FF905AA36D9F5007EAEDABC
-:1009F000FA8BC7E95C05DE76EA74F458B5F5B48382
-:100A0000DE3FAB928C88C47A1678A4919DFBB47CAF
-:100A1000EB47C25FD54B86E9B84FCB7EF5B9A86FDF
-:100A2000402409EB2F7FFA7DF66F55F9DC7E578263
-:100A30007DAA68DCE508BB13EC53E3FB53490F0ABE
-:100A40003EF125EFC3B19D12F4CCEDDABE72D3476F
-:100A50000EA29B13B8211969025E649FD634CA0B9B
-:100A60001CA989F6ADF52AD2FFB09CFD2017DA3F0C
-:100A7000D7101074F1DCD66D640F54BEE3D4A7D345
-:100A8000B8DB6EF100EEFF11C52FF0FD67EBB20D84
-:100A90001CB7D21EC8563915DF2B1FB995F170E966
-:100AA0009BB766B35E07462FDB685E6F2F5AE7E29F
-:100AB0008DB3789D4BC0C77858F933E1CFF85C818E
-:100AC0006989EE1B6F1F22E487136E2E21FAF81C32
-:100AD0007B223FCC11078878DEB7C43B644EB83A1E
-:100AE00035FA9DB93B8708391080D07BF4FE640D40
-:100AF000DAC5C417E4373F9F4AFDACCA55FC4E9592
-:100B0000D71F30E1259D13F11C9A62C59DE6E17E59
-:100B1000BD39A527D9C14E38E5B8BE8CDF69D0C82C
-:100B2000FF1BD58EE17664B33359423BFF4876E232
-:100B30007B84EF99EBC0BFB7200A9F6AB61C617C2B
-:100B400002B4BB527344FE61A243B48B52116E9F38
-:100B5000EDFBD0D19BFC1D99361840F36DFB88F35B
-:100B6000A0676954DFEABFA6D919F32E49CDA31FA8
-:100B7000C5D1B333EEBD133FC3B3065235D2378F61
-:100B80003822535FA471705C8AD75C72BF33E6BDB4
-:100B9000B04E7C71747ECFEDA44FCBBE5A6AD27F2B
-:100BA000FCFAE3F9C19371FC0036667DA5F79FAAB4
-:100BB000ECA1C7093E5548AF01A657417FA8A347FE
-:100BC00006203D7CFCD44BFBBF4F7EBA467BE674CF
-:100BD0001E2D96CF563E83F44BFE348477924E7C86
-:100BE000F64B07E9BD39156807E3BC3F76EB74297E
-:100BF000AD2BDDE2F78474EB063ED7FABFC55F97F5
-:100C000076C35FF7C5C1F373284AA53B0CC79F5C49
-:100C10007E09FB15E2E06BD9BBF17CB37A88C67024
-:100C20008EE79BF8B71FA2E0B8ECBF3F61BCFDA206
-:100C3000973807AB7EF4AF2CBF10AC1127E26D756F
-:100C4000E853CEAF23F9C5F95D33E9BCBAEBBA631B
-:100C5000E1195FBEC1E4471DF7DCEE8400C5DD4548
-:100C600076C8FC0E433BCEA58EF4F3A772F99C70B8
-:100C70009DA9EFB7AB110FE9E7EBD2AC3CDC40EF3D
-:100C8000C1B4074AD400B54F32E30FBC114F5A9498
-:100C90009EF47E8BEC21BD2E1C826989DF050CF24F
-:100CA0003CC2D05DF91A715F4B3EBB2D6CDAF54E3C
-:100CB0001C2FBCE6CB6D746E7E4871F1B9E5A23590
-:100CC000733C7CFFAF25FF3F092F16BF8A70247A43
-:100CD0000A188E5E08E71B0508D0FC08F079B09C66
-:100CE00052B6E745ACB704014CE724F1FE9465E049
-:100CF0004D6DCDEDEA374139E820F9BF14E511FB20
-:100D0000BD37C6962F6BF998F16C591C9EF908CF28
-:100D10007A75C5B3DC4B4DFF4A29949AE7BA6CCF7C
-:100D2000B7EF95F93CFF940B58DFA0735EDC3138C8
-:100D3000D522F3FE9C7A4A0A71BC61204BBCDF8A43
-:100D4000F84E7A968587F1F67D7C7AE2D97747D29C
-:100D50003DB1AA5FFFA5E4BF303DF1EBB707BE4848
-:100D6000F9E7FEDCFF2FD0B57EC5CEBFB21DD3BEE6
-:100D7000D3C9FED0F69DBFED4F72B9FD05A74EF861
-:100D8000DB7EA753C435EC4CE177CCDAFB09BF5DC1
-:100D900070C7972561965B6B791FA75FEAE0FD3E00
-:100DA000D5F2379623A75A9C1AADA366670FF68F24
-:100DB000D5BC901422FF40FB8E2F4746BF77F5CF5E
-:100DC000AEA7DABC4FD39E0273296EA63D4DC4591F
-:100DD000D6BC38E6176BC81E69DAE520FF7FC56F01
-:100DE000FE5E427CA9FD995D0EE25B68973E02883B
-:100DF0001F732EFDE903F65E745F0CD8DE3E7DE9BD
-:100E00003BB3E87DACAE701170684738D0BA102E95
-:100E100095A49775078FEA6F2D3C3E657BA2AA6566
-:100E200014D351275C24437C4F09B9245AFFF31E85
-:100E3000F21BB5E7A1FCD769DD5F9690FE74A17542
-:100E4000FFC7A5E27DEEFFE7D76D838B5AF753DF2F
-:100E5000DA750BFC1F76A926DEA78AA383AE78FE7F
-:100E6000DC0F38BF2D45E7F97E45FA7FFD5BBBFE01
-:100E7000AFBCEF25E4B7BDD87DFFF85BBBEE0BED53
-:100E8000FBABE6BEA7A874BFAE7DC7DFFBF37ABF9E
-:100E9000E2BA938BBEADFCEDFCEBEED08F64AF8B72
-:100EA0009ED8BA075ADB344CD775A3A78C2AB2FC5C
-:100EB00010C21E914D7D631D0C3336915D857A06FF
-:100EC000D901EB3245BE1EF50799EF0F72B00AD477
-:100ED000F7D5C5BBB68A1F54CCDBFF7C23C7B3ACA8
-:100EE000CBFE0EE495D17985F06304D7E8BE5DD8DA
-:100EF0003E9866D3823A3D57B5D2B709CBD5DEB21C
-:100F00004AF6CD3AED6A57F43B168ADB1163A7B86F
-:100F1000E3EC8DE402478C5D9204BB55F2C327E9F4
-:100F20000AC7FF3921AA3DD6CF2A12EFF42743285A
-:100F3000A0BA2F1E4E8BBE3E9C5C7CAF5235E104A6
-:100F40008641EB766A0AEB610AA0FD28D621EC4EB9
-:100F500084A316054730ED50C504B9A20D6338A22D
-:100F600001A14D1A4D70F5331C83BD6495E1DAD9AA
-:100F70001FAF3B7E1FD6699320CFD4C725FD9B872B
-:100F8000F3D822111F100F672BCDF795AF21FD77F6
-:100F9000D51A71CEF5CCEFBEC3F9263BEAC374CFA8
-:100FA00030D5B7A288FC8E5E43223A5D3543BC2F14
-:100FB0005846F7C032C9D41771B899AEBEA0B0BFB9
-:100FC00012ED0CF657AA40F69F3C091AD91FE855B6
-:100FD000E2E27A558E7B0ADE2CE29EA01034F14EBE
-:100FE0004B6CFC4F601214525CC314B9AA81E675B5
-:100FF0000A521A28EED2616FEDCFFEE17E008F918A
-:10100000BFA5FC8B8D549E8B7A3DD07D32A5F53DDE
-:101010008A6FB84D4E058EAB8AE0A728B85D76C6BC
-:10102000054A149CCB212D267FA2DFE126B213F2C4
-:10103000024E9582C72A5CBD62DA9FE87586C70BAF
-:101040003A5D2AD94753D4DC98F6B267EF7B64D770
-:10105000BC916E63BBE0F29CC131EDAFFAE0C4C657
-:101060000526CED23ABEF7AEB8A78AF6D623AF632E
-:10107000BB37EF0720BFF1155A694CBB66D3BF12CF
-:101080009962E7F766AE2C1C13336E737837C3A5ED
-:101090002A0B243A0FAEB2214960BDEFEAE531F5E3
-:1010A000BE37FA8A987E67183362F255ABBF0025C7
-:1010B0000360DCEAB340EF0796B636C6B41FBEB78E
-:1010C00039A6BEE7753485302DDDA705291D75507D
-:1010D000DC231D8EFB41E71BCDE1853AC5EB14D324
-:1010E00005D0323A16F0565018F2C8A3FE9728BD24
-:1010F00050FC3298EFB2269BE7AFEB6DA1C605B965
-:1011000014FFD3F0E35D12C743EE263C1D1D69A812
-:1011100048C5EA63CF34BE446953DBF87A7AC7B373
-:101120000AA08DE5AFDBC6E70253E4961289ED9F76
-:101130001EC39D51E72EDDBDD7F9A3D2F27D4548F0
-:10114000476B738C865DC4F727BD3B5FCEEB5A0FB0
-:101150005425128DE73F2AF51EA6384D2B4E2AB98D
-:101160004216BF4771B98893A9B3E94926F362FDD6
-:10117000409D6AE738FE65C582BF8D6CDBDCE82EDA
-:1011800023BBD3A5D1BE2667C4DEF3BE71B4B8B706
-:10119000F7459179BEA2A859D7931FBC3845B4270B
-:1011A0001F1F8D37DDC6FA94E780BEC78EF9FB0A94
-:1011B000F7A9C4CE9AA67F10E0F74D0FB44D903436
-:1011C000809EF794DAC80E87BD76FE7D99A6C2C9C7
-:1011D000A70BA87CFA5B1CC3B86BC22F0B49BEAD32
-:1011E0001C3CE4BCEF8C7ACE48A045C5412C2BD6E4
-:1011F000783E1E25CCEF1279CE285CEE99A7DBFA5B
-:10120000478DB77282D0FF560E4EDE4A78EB3960BA
-:1012100088B8A842B73680E9239CC37C4209E75CC2
-:101220009F22E2ABB4F3BCF37F7CCB88349263198A
-:10123000E57A1AF94133B6CA1DF7CE683D3FA6FFDD
-:10124000D0C13AACDF3F19E7B58562D744792BF2BC
-:101250002458EFB0CA9125613E43B2CAD7CF9E5CF5
-:10126000C4EF31C6D41F9AD751DF70E574F6AF15BD
-:10127000AFDFBFB688E037CA467125EB7F67E777F7
-:1012800006709DAC4FAC447A06E97CF0EC710178B5
-:101290007AB8FC90A4C5BD9FDB5A4CF982BEBE4112
-:1012A000C558FF92B3A9FC0EC067F5492CFF2E3933
-:1012B000FB3D7EAFB3C961F4BF9DFD37491C6F365E
-:1012C000E3E68F37AC26BABEEA7821C52858EF5737
-:1012D000D6A85F303FB0E2EC3AE187F88B78FF6345
-:1012E0005B679EF883A7139E06BDCFB53E0ABEF48A
-:1012F0009B2F334C78FA8A37CE5E8BFD6B8BA6E53D
-:10130000105D9E0637C7F59D561F9F4DF33DBDC529
-:10131000CE41B44D26BF0C149AEF11648673E85E7B
-:101320007EF19B368E473A88F860203EE4B7BE993E
-:101330005E4CED3295748A6F383DFECFFC6EC2E98B
-:101340001F0207172F0B3B185E4D998B2ACA19FFF6
-:10135000B574F23F58F06D34FB79B8D4B8B298FD4B
-:101360005CE67D1163EC45BD3FB96BC2977C2EB046
-:101370003617F5FC340A393E5347EF4BAECCB5B3C4
-:101380005C5A99F6C5D44CC2F7725784DE81A859CD
-:10139000FD19C317BBC98DBE07A69C91418B8ADF7F
-:1013A000D2868AFD571483F75F39E3E0F2AAD5A706
-:1013B000996F5BED4F98E7ABF42E23DD17AAFA8700
-:1013C000CCF746911FD64BC328DDED5819C54FA069
-:1013D000F1D30E3E3F14F7EABEE96F25939F728664
-:1013E000A4CEA2F9B56C3B339BE2056624A9B328D1
-:1013F000DEA06EDBFBB329BE60463F7516C517DC69
-:10140000573C790E97F7521FB0A1FC7AB964BEC859
-:10141000E7AA7FA2FC535BEF98C3F553C4BEDFB6C7
-:1014200075CE9C00F36337D3C1A9FA1E21E779E892
-:1014300060E9EA1721FA3DDB2EE5E6EF49C15CC120
-:10144000F73EB9BB0FBFDB09056D1C2FB6BE58F8C0
-:10145000FB3BCF5741A5F3D5CC7C30C8DF9CF95C72
-:1014600092F85DA2436DFD097E4736DEF203F2A7D6
-:10147000AE9080DFD1AF026D24D1D5425BF83D4AFA
-:101480005F1CEEBBB798F5A9368E775DBA7A27CF89
-:10149000EF53DD8C5B562345DEAFF54E04F69FF02F
-:1014A0009D88D838E30F6CDA40EA5731E1B2506ECC
-:1014B0009BEF10F37A94E6B5227D17C7392B6A5B50
-:1014C000B64FE851856C3FE524F37BD175BDDF292C
-:1014D00049F43B088DB528EF91E49EA96DE674F5BB
-:1014E00050607CEBA9841D3AF6537D40C89D916DF8
-:1014F0001F38A2E319779BF04D357FEF2A3E1E7708
-:1015000037C9A5A8B88315BD5BFB927E68ED6BE774
-:10151000BEB4F635F70568BE99192F3D45EF9D50CD
-:101520009CEB0FE93CE3B9A456F25B778F27D63EDC
-:10153000887937250BBE11793689F5A6F8751C34E4
-:10154000E76DAD2762CADFEED61131E5EBBF6A1D4C
-:101550001193BFC7AFC7A26FEBBB45DF5DDB8BF954
-:101560005F3CDE897B6D17C23B8BFF5483AF50DC41
-:101570009716FCC682B7354F0B6E4DDDC4E32AAB20
-:101580009F8F598FD236898C1E482D11EF5F298D80
-:101590005700ED87B2BA85EB75B71E39E5333EC704
-:1015A00059A6819FF4DEF875554123B7EBBAAE0812
-:1015B000F3E3159AE0C75DE3F823CC9FABD13E235C
-:1015C0007DDC5A77079FC6F5137D4F4086C37C9319
-:1015D000EE124A645FF862F4E372BA31117D6EE58F
-:1015E000BA39263F45BD3DA6FEE5396B62CAAFD08C
-:1015F000EE8E29BFB2F0DE98FC77F59FC6E9F79B27
-:10160000E2F4FB2762CAC787DB58FF7EA3761AC7BE
-:10161000A74F3C1A613DBCB556E5FCEEDA1C4E5FA7
-:10162000AED598FEF7D41672BAB756E7EFBFAB1D2A
-:10163000CDE9EBB506A76DB55E4EE3F946595BB84B
-:101640008CFCFBA33353F93C6AE350DFF525140708
-:10165000B92F5244F837F640E34B240AF2439FBEB9
-:1016600047F54EAB0E8E475CBB6BCC1F6EC17CC684
-:10167000EB322469E7D38B6430A2F0C7333D0C749E
-:10168000FEED01F13E567CFD8525424F9E0B61F13A
-:101690009EC06A3E0187B92EF5152393C54684EC9A
-:1016A000F6B9E0673DD4B65ABC5333177428237B90
-:1016B000D607FE7B381E29F67D01AF3163DDAFB062
-:1016C0007C36DD3BC5F6DF7737F2BDF267F6A64F15
-:1016D0002EC5EFD77A25FE9D8F033BEFBAD5C5F611
-:1016E000AF75FFF41DDBC5E8130B4B047DB54B7ADA
-:1016F0001BCD379026DE2F8A6F37CA5CE755C108AD
-:10170000EB1F11D43F28DECCA2CB19EA2173FD9A3E
-:101710002D750CD1C71ABEDF50D5A6E94184F798C4
-:1017200043822E46205DD0BE8D3D2AE86024D20142
-:10173000CB41D33EB4E800EDA997A8FDA983A03B17
-:10174000B17DDDC41FC9647F8DF92C14A4F4B2B33C
-:10175000915DE7B07C5C9BF8DDA40BD993965EDAD3
-:10176000523B97F16867AD8FD3D6DA4A133FFD9CA1
-:101770007FB97635E7F7D40638DD5B5B6FE2670348
-:1017800097BF5EBB81F36FD4864C3CDDC2DF3592E0
-:1017900067089FBB4B4C39ED2A37ED0A917A8D359E
-:1017A00076BEE78F9F889FCCA5B9127E544A21E26E
-:1017B000DF75E9013BE5EB92690F68D601AE7F9DCD
-:1017C0001B5A490E54E5BC28F4B0383C29CFBC86DE
-:1017D000F164A619C77A20BDEE5607E2C389C6FB9D
-:1017E000ECB1EF8D5E1C5E2C73AFE57B7DF17CF17F
-:1017F000267A8F42EECA0F0174BDAC4CDCEFA238E2
-:10180000BDAFCAEF555B9B795F4CDC7FA9EEEBE681
-:1018100038DB7F9D9C514D39030BA87E87FD9D7C55
-:10182000703EBD8FD7052E71F6F7E141627F2DFB2B
-:101830001BF54CF64BB58764B6BF2A731B3C6C7F17
-:101840008F8E78683F6FDA2103EB8B8A38EF5D4A21
-:101850001D6914D7D3BA7F1CCB99557B882F2D33A4
-:10186000CF7BE3CF6DABE9BC574A04EF30C7D52F30
-:1018700037CF7BE3D75D3DFE089FF7565FE05EE91B
-:101880007B25B1BFE7137F7FB73B7CA17882E8F768
-:101890005C4F9EAD653BEDC8B63B1E0AF4FDD7ED2F
-:1018A000DFADA5DECF4A441C35DF9BB3F6B3CEFCDB
-:1018B0005DCEBA492EBEC7D03E42E5F76FDA25F1BC
-:1018C000FE4EFB5F415FA3D1FB3AEACB24172ED338
-:1018D0001DCC574787C57B01E3E95E6282F702268C
-:1018E0001C0A0553A8DDC100FBA3C6ECF305E9DE25
-:1018F000EDA8D70D99C8ABF465AF4C7860C9274BFC
-:101900005E75D295796F8E6232F2BF3AFD698B4671
-:10191000E7907ED761B7BAA7F23B45A75B81A349A1
-:101920002DBFD8F083864CF712461CF20549DED64F
-:101930009976E6A813013915BF4FF8CCCF76D018A9
-:10194000B453E552718FDA8882AFE5D7B2F89CC5FF
-:10195000D7AC7B7BAAC3B785FCCFF04212BFFF1286
-:101960003FEF41436DD67BD6838612DF33EFE94DDF
-:1019700091CFEE3A4776419B8817B8E46CFBE3645D
-:10198000F7AC7AB607DF53BB907D50A39E4EA89F5D
-:101990005A698D4D9CA30CABD08693BD497A2BD947
-:1019A000A1965D1A5FBFAC74D2D8A15934AFF16D66
-:1019B00006E1B76A3B2F7ED7ACFEF4BC76A1357E3C
-:1019C000CD8E11EAC228BFD5EAA19219C7F2F5DE81
-:1019D000A19E10991B23C7BEED7A1FD26119E11792
-:1019E000D98624A7BE4F3B80EBB80E5A595FB9DEAB
-:1019F000FC1D8B1B001CD1F7646F0483F9C39F741B
-:101A00005F0DE1CD6288CCA77C8D14A97A1141F8D5
-:101A1000C9C4716AAED6555E5FAC7C4E36EFC1C6A6
-:101A2000C3FD4E136F2DFEDFEDFEC4F1FFF65295A0
-:101A3000EF41B73F3BCE46E738EDBF97F9FD54ACD9
-:101A4000C87C25384CDC3B1D3ECF7C8704F9CA009E
-:101A5000BD2B5F393D7ECE64F61FD1C106C59F2ADE
-:101A60007AE1F551F7CD82E6EFBA6CC194E22553E5
-:101A7000E78595E8F3B39F9AF32FBF7632903D74D4
-:101A8000952AECCEAB5C90798678E1D9D345B390BA
-:101A9000415C45FAEC707E87FD618273C73B20C4D0
-:101AA0008F2EC17D7B5F9CF3C14D12FB4B9B9B44F2
-:101AB000BE78711AAFEBABEE23F6DCA304D7BFB848
-:101AC000491946F43D343D924774593CE6ED74099A
-:101AD000E75562DEC7C269D743D4EF5BBD6BAEE3A7
-:101AE000F3A1C6369ADFD0F4B6F5F7917EF9AC0DC6
-:101AF000C86F7864CCED4B204A2E7B4A27FD8AEADA
-:101B00006D97CC77EA7688DF33C016D9D1FEAD3F2A
-:101B1000E915CF53BD56D3CF00AB9EE77BFC3354C2
-:101B2000B1073039CBFC3DC948FF44BF2F649D67E6
-:101B30000D25580AFF23BF2BB6DDF44FBE39F483C1
-:101B400039E45F84D6481ECDE34892B847ED29F5C5
-:101B5000FD8EF8CC50F2F3D23A7E26FC0347D2FC3D
-:101B60007C8FE46DE4CF747EFC975A17A7EFA27DBB
-:101B700044E9FFA07D44E9FB681F51FA21DA47944C
-:101B80002E3E839DE2FECDD08DB799BF76B38EEE0B
-:101B9000F94BC0D4EF13FF4ED35B26FC4B9A0EDDFE
-:101BA000D983F0A059E6F8E8E26715D64F4FB68C16
-:101BB0008AF95D52A4D7C3B4BE92E63FFE84EE59C3
-:101BC000973429AAA4D1BDECD3D91C7F18373F8202
-:101BD000039D37447638C4EF2999F3DD9ED6B69E2F
-:101BE000DA6F7F368F6648E738020F773813FEDEEC
-:101BF000B0156FF7C450A17F7DCF19298B3E7F8C24
-:101C00008F4F633FF018C2E7823FD03881BD320C5E
-:101C100060BC8CF56FF4D3C53D042B2DDEE1E038BC
-:101C2000E5ED3BF65F7D25F6F77F00222F54BD00E2
-:101C3000800000001F8B080000000000000BCD7D1D
-:101C40000B7854D5B5F09A39F34A32934CC2000957
-:101C5000123809AF00018664121212E024048A8A45
-:101C60007482D482A28EB462541E23D29ADED23FF2
-:101C700027244012830605CA558401C1C7FDFCAE66
-:101C8000D102175BF44E50A9F6B73422E2A354C731
-:101C900047552C4A8A62EBAD2DFF5A6B9F939933BF
-:101CA0004C0222FC97F0E9CE3E7B9FFD58EFC73EE9
-:101CB0003BB3265E5E24C900A7E9670A80CBDB1729
-:101CC000A008604CE9D70FDCEFC1F2599BDB0400A0
-:101CD000F360DB3437F6BBCED1F1A21BEBD7BBDF11
-:101CE0009B968EF51B334D07A8BC49CE999E812546
-:101CF0004088DFFF515EC5810CACCDF456DB024E4F
-:101D0000800A9000F2807F4EE37F531D29008E6889
-:101D10007D9ABB8FA1FEBDCCCB0CFD2F978718DA27
-:101D2000AFCC1B6D68D7E79DE92D34F41B97D19597
-:101D30001B74D23EBEBAA71CF70326080FA37DED85
-:101D4000FEF2EDDBB19C35719E8FF67F0CDAAE1999
-:101D50008D1BFDA4A479E3FDF4B245B165F503B88C
-:101D6000857EC7F6E3103E5286ED926BF9813BF11A
-:101D7000BDDB322590BC00359BADEF4762D6B10488
-:101D8000FC6961EC77DB0EE37380882DEC03B83DD2
-:101D9000E00CB62000173D81ED0E433B8FBB78AFC2
-:101DA000CD4DED4BC0126DCF01A83D9AF3E40B3140
-:101DB000E38DCBE8BCEF7E1C6FDC9E39EE065CDF6A
-:101DC00093A55F0F90719FE55E97E723040D4C800C
-:101DD00009A711E42039CD80FD4EBD2485245CD7B0
-:101DE00034E99BD4483E3EAF423C67E17B26F90F85
-:101DF00065D8AEBE2CC14E1CE76F75F2932F5869A3
-:101E00007CB8D19F1FA50B80950C5FBD7CAB0E7F6E
-:101E10001D01F0C73A07977FAA7373F96E5D269785
-:101E2000EFD5C95C7E5097C7E5AC431068C7F1FE9B
-:101E3000FCF7F1007D681C15A06FB41C67F39A07CE
-:101E4000E03ABA7E2F85B6E37EBF289F9006B4CED7
-:101E50006F70FE620D0F4802D5448CA5F8DF8FB776
-:101E6000BD98E5E3E7AA0BA75AF27709141C77B9E6
-:101E7000D724C65DD4F1629627DA0ECBDF33F48720
-:101E800015A603867A638EB1DE5A7120F67D1D0E8B
-:101E9000F1E52D9BEFB0055C58AE372921E799EDB0
-:101EA000FA7AA6ED4F524C389E659F3D64C7FD2DD2
-:101EB000712BA0607F0B80D29E7FE67B00F50CE744
-:101EC000791204DB138C5B47E312BDEF4F02E93C50
-:101ED000C67D0B6983D6A3FE973DB413DF7B2B4DE4
-:101EE000017FCC3C2DDAF89FA5B7FDE22BECF7D9AA
-:101EF00033404FB00E73693D63777D6C3663392E86
-:101F000059D0C95877C49C81E5899A7F6C3CE261BD
-:101F100032F59B26637B6ED71107A2FCBEF6AB366B
-:101F200039106F6F9BCD00034020BE04FBE31854B3
-:101F30007FD07BD5DC46FCFDCAFD4961F379ECE737
-:101F400041E445A6A34AC1EF3710DD88791440511A
-:101F5000B37415E8F32A241F68FF547FADDDFFE654
-:101F60007AA233E8DA48F2E13840B885D7AFA4C6A0
-:101F7000F2FFD2677FC2FCB9280BF99E04E066C16C
-:101F8000BF0EFC773A97F83534DD89EBBD358CFC14
-:101F90000F179FFF9FF13AA37C3E22219F1FBA1289
-:101FA000EB4B9F91BC766C3EB96F98E0278DEF7537
-:101FB0003ED7E1B87493C47CA9D73FDF27CD08256D
-:101FC00080F7368D2E86285DB369BE65CF5AA00591
-:101FD000D7B76CD288FEB1E3C7BFB7B44902396640
-:101FE000FC279FB3D710BFC8D0D5AF1AF967DCB3B1
-:101FF000A7322AF24559CFF868D3E44DD720FF180D
-:1020000094D726FF9F7E8EF301E27127C2A7327319
-:102010006E36CD3FDB094ACB7806CB1C07CA89ABAD
-:102020000588E0EA92EBB201E1B919D12521DDCDB5
-:1020300051AA5FBF0EF1F80373E02A92F3C7BC43C5
-:1020400078FC6B5CCBAD606672CD36E17873E7D817
-:102050000B693FB31A045DBF9EDE759C9EBF3E298F
-:10206000C5D480EFBD6E8246C888EEE375AB3F9B5A
-:10207000E80D37EEFE08F163524649A7537A9617EA
-:1020800044C91FE97894A2F26F9AE454699E936E52
-:1020900033D3BD25ABD546EBBA154207149C7789DF
-:1020A000376C23F9773BB82D5462D1D54D1F447F4F
-:1020B000E5FFE8388DEF2FE9944226ECDF5ED70E7E
-:1020C00016C4EFD3757BB91CFCCDE0C6CB101ECB7C
-:1020D000C7DBBC2DA4B734FA32AB26389D405F9DD8
-:1020E000499F96683BAEBBC2E10C4BA9F4D87A3C41
-:1020F000761D8DD94ACA78DC8FBAA63C9DE99368D3
-:102100006170749FE36C004E92F33B5358CE1F7B7B
-:10211000AED84C783AF63B6BC844F52D23DEB8D3E5
-:10212000C7752079732CC36BB6517B466E48C5F6D4
-:102130005BCCA0925C86ED426E3D3FE9AE77488E67
-:102140002DDFE932D94D828E653401A447D7BEF325
-:10215000EF38CEADC8AC766F546F2C9AF2E8C62734
-:10216000900E1699DBEE29C767A7203CD68DF0FCB0
-:102170008BA97D38E9ED8F1FB287CDF4DEC323B77D
-:102180004B38FECBA98191B41FC854FAE7E0F39A0B
-:10219000437DA105DF9FFAE83F0F92DEBCF5C9BE83
-:1021A000CC5F3ADD4F233EC4F59C403EA4F59CDC59
-:1021B0003784F92E8A7F0187C5280FC8246ADEB1CB
-:1021C000CE4FF80C24CBFCDC02AA7219E17BEF4D58
-:1021D00040765381645288CEBB9A115EA633E9499A
-:1021E000196FE6F7169951BF121D06E44282C7091E
-:1021F000935CA0F105D07ADE7F6EE4F6167C7FAEAC
-:10220000D63F4A774797FC86E86EB3DD6BC7251C3F
-:102210004F32EA7DBD9C393E9DF9E516C79760298E
-:102220008C3E5F52FBB5B19E0F0AC98D8206B9F094
-:102230000E2CEFD4E07EC548FFF7C7E3FBB7B5AF80
-:10224000DBF38A4CF36EFEE9DB34EF4B4E9E175EF8
-:1022500011F03B6112FAA55BBF3AFECAE3A3E4E1C9
-:10226000F5EACF3F7EE88DB1011CFFE3DDA38703D4
-:10227000D2DD02A9F3A307115F9FBB3ADFF93996BC
-:102280004FBF74A81FC12F7EBD8B6ABF004B8C1C33
-:102290003A6E32F17E17D13EF0F96F0AFD3733BE48
-:1022A0002DA827106E0B5AC66C2779304DCA4F23C4
-:1022B000BBE9C431E3FAE2D7A98FAFAF4F1F5FEF9D
-:1022C000B78CE08F709838CE2DF4ABADF373C2EFBE
-:1022D000677B469B9015A3CF333AC7A6E747F1E447
-:1022E00057EAADD4EF1A12F5888AB90E81D7B935FD
-:1022F000A650430EF7E3F6EBF039E1BDC2D3C0F5CB
-:10230000394ED467D87F51E66F785D24E81CA8D792
-:102310007E00FA4FF5AA5F61BF3797A5B25C987B44
-:102320004B9B95ECDC6E79A6BE6D3E3DFADBCB3364
-:10233000849EECEE07CCC3A43F013767C1FA24ADFD
-:102340006E2AF963C3AF483EDF99EA95D064841AD8
-:1023500019C2C4D7272144F05E6D0AB2BDE7203D03
-:1023600080658BC99B69C1523277F5019E27C47085
-:102370009A06010BD57F6B8A3400BEB7CA539949C0
-:10238000F4FF2638FD6417FD207DF51892A395EE25
-:102390009973E9F96C35D5DD82FB6DB4CA77E793A3
-:1023A000FDF303C94B76AF0E175D7FCCB578AD0456
-:1023B000DF7E41D9AB22FD16BEA2384C0C7F874A86
-:1023C000E3BE6109F6A575BDE55C3FC664263B2DFD
-:1023D000E41A839B7DFBD07F14FD1EDFFF2328932F
-:1023E000C81E98F35B07CBF19B40667EFF11282C3B
-:1023F000C76F8600D76F8188F54B7CEFDDD2FFD9A0
-:10240000B91FA2FB7A77E257BBC9AE9F2BB5F7CDB8
-:10241000C176B512F248CFFCDAF17FB646701D4A9C
-:10242000830592D0BEFA35D129D9EF475DA19DD859
-:10243000EFAEE42DA91D588F9884FDA556069FA4E4
-:10244000FEAA19FC0D58F64D0E3C4F7CF8CB14310A
-:102450004EADC5E126F94806168DF3D13B2EA67781
-:10246000D2BB3761BD0CB145F03AD157D09BFA577A
-:1024700060B97BC2EAED5468DC53B27727BD3AD528
-:10248000CCEFC36999D75116A75F7CA3CDFC3EFC66
-:1024900043E6F72775590CFAC537CE1C7C1AF73777
-:1024A000E5EF965EF5CECD05827F7C7DCCC144F60E
-:1024B000E0FF68FC851092683D0D7B4DA116264219
-:1024C000611F94E9F40891D5446FE50041A27BD8DF
-:1024D0008B7A4C9F2797F7FFB9EA233AC476B60761
-:1024E000DB9F2739690F0A3EC1FA54DA8F23085E51
-:1024F000B2D750218305EB49F8A290BB6E203BB6C2
-:10250000A502DAA93E092212E17B0A417A08F9C341
-:1025100032D3ED5450B8AED3F1F740E5F272087102
-:1025200079258485BE07B9F1299CFFAA4F40EC6745
-:102530005498E91D1D19F747686FC0E5B798C9EEB3
-:10254000F0FD30B1BF30A840870B22C473EE709904
-:102550000E814C31BF80879D9EFBA2F070C4C123C9
-:1025600089E0E18DC203E710F03803BE023E931408
-:10257000840FCAA7C9D025D13C8A66DF548297CB85
-:102580002AF073D90B5C5EA8F79C09979248C01299
-:10259000C84F009FA989E96684069F3F1600CB2F8C
-:1025A0005DFE5C5B20F3735D0E217F66923D1A2F0A
-:1025B0009FF4E7BE94CA2F64A487AA82AC7916D48C
-:1025C00067BEC2CA3B8760FDEAA7F344BDACF257C1
-:1025D000B958FF41C128511F5759684578D59B46C6
-:1025E000CFABC2FA90806923F1E5F27AB4AB715FA8
-:1025F00081A47B8244C7A60C709BB03D505FE42D44
-:10260000C07A00E912106E7629A79EE06CFF397837
-:102610001B7015196981C905B8DEFCF99DAB053E33
-:102620002BFBCFC5FEC73BAD6CB7ACB10583842790
-:102630006477777D69747FC79FFE790D3D7F7A004F
-:10264000B849BF80472EF4BBCE5C8FD9015C5F8C4C
-:102650007283E21F38DF4C9A2F80EA49A6753D2528
-:102660008508FECBEBA7B13F7024CFFFFD82BE31C2
-:10267000E3E33EA4F134AFD073E0C92924B8958CCC
-:10268000F45F4BFD4EB850BEA651BBC0434F6563CF
-:10269000813297E68D7F6E4EF9E6862538CF52A4BB
-:1026A0001192D38B0B0237D2B84BCD914185F86C88
-:1026B00065CA3B36A60B05E993E403F12BEDB7069B
-:1026C000E991E87ABFE057E40077B7FD8AF8F5F8BA
-:1026D000BB6E58E813224EC2FF15CF0D3E8F6635F4
-:1026E0008D7F3BAD63A9D4B590E8F2F3F4D76C7F4E
-:1026F00066BE1C28E84E935B4B9FFB9AF9E7593363
-:102700000425CD3F8618BE5BFA5C9285FCC3A59F6D
-:10271000422805DF2FDBF77803F93BA5E8FF939FFD
-:10272000BC78D753CC6FFB485F22E896FEF7B3CF57
-:102730003F487C7A6512C7A126BD767408D94153FB
-:102740008E461A106D70E2D9372E13F4AFFB257F39
-:10275000339D8F1E9F26ADB887F0BD0CF16FC7F972
-:10276000969982A26E75B855967BC24FAED1F6F19E
-:1027700019746E9CCF72453D504AFBC99480E56345
-:1027800048F81332FE23FEBFFD686835AD13A46F11
-:102790006C246F4EA15F4CFBBAFDB178BFA3EB4038
-:1027A00029F9DDE417E33E17B71BDB97C6EA870478
-:1027B0007EF296022D1E960DD9B4AF5FA33FF4C1F1
-:1027C000309A777E1AD9871329AE90405EEAFE715F
-:1027D00028B9F29102B697DB25E287324BE2FE0B75
-:1027E000F3855FACDBFFCB1E92D88F5BF6509F5119
-:1027F000EC276BFC0A612FF3EF93A45788CE022FCE
-:1028000003D1C12DDA9E60731FA6B95B9B4CECC748
-:10281000D8A53BBCA4F7C73DD2FFB67F63BA4975C4
-:102820004326D527CC7DCCC3F655908435FA556C1C
-:10283000673E99DE954BF33F992E838AF3352475D5
-:10284000E5929C559F757849EFC6AFFBED02E10F0D
-:102850000C098FDF14F1083C139FE7BC54BA89F0D0
-:102860007C12F99CF0B7CC35BC3F38C96E989C19E6
-:10287000C1B241B3D3731E1B95361BE1E2A3F5C66B
-:10288000D8D51DAF5E9342F6F26E8B3FC58DFD4EDF
-:102890001ECE35F841F16551189153D84BFB1B33CF
-:1028A000870412C05D2F7D9B2C0C2F9D6E7F5DA732
-:1028B000C00756C247B9D8876A77DB7D447FA1A994
-:1028C000E44F2EBB19DC2DD87BD9CB0F3738A8DECF
-:1028D0000C4CCD27E97FD4FF137388ECF15FA68CF5
-:1028E000BDB71CEBBB8E59849FA22A87F263EC58BC
-:1028F0007BA6196403BD764A8B491E13DD23BD26D2
-:10290000C9C920C7D0634A5E86A1EEF20E30BC9FD3
-:1029100056926B684F574619DA8BA13612C0F514E0
-:10292000654AEE10AEB8CF8C0243BB1DE93A4CEBC2
-:10293000FC52D85125F84FE8DB20DB4365118007B6
-:10294000900E261E37DA59259136F637930E5B0C1A
-:102950007100FB59E250C9851A7F0D8481C45F481C
-:10296000FF5E9263270F8BB893ACC17359B6D0CF7B
-:10297000CB5E96D80E5C76CCCC7AE22478BBF14361
-:10298000F251E7BB78B8F7F51BE1DC7FAE11AE5929
-:1029900001235C2FAB31C2353B6884EBE05A235CEA
-:1029A0007354231C87344D34F41FD65669A88FD82E
-:1029B0007485A1FFC8D06C437DF463D71AFA8F6980
-:1029C0005F60681FB7F736437B3C5D8D0F2F33B4D4
-:1029D000DB538F305D1D40BA32A13E287CE9DFE237
-:1029E000E8C2C2702F1AE8F48662F0AFE23FC27FFD
-:1029F00099969798006A03F1E385C2FF1584FF94C6
-:102A000028FE75B9DA139FEAF81D42FA9AE565794E
-:102A100084F07EB22485E9E5E04B270F2B40F84F88
-:102A20008502DCEFAC29228E22C9C126A2934E700A
-:102A3000B591FDB9C61264FF4545B3702729E53845
-:102A40007FF3FB25E86FC6ACB35A49024BCC7EC777
-:102A500087DB0DF5C297F61AFA1775860DF5F18723
-:102A600041227D55F0A6F7792A8B3E5438FC55FC5F
-:102A700049F0792A4BBF0CDE45FA37DECFBD5AAD9F
-:102A800097D2C8AFFF7BFBF368D6A07F364825BF3F
-:102A9000377247AAD73400E191FC4E03F9DF807604
-:102AA000B4159511B80FB23E98EF10EFFF2D69F2F3
-:102AB0002AEA6F42FF9CF08E70C9237BAF1692BD4D
-:102AC0000417B25BC80F832B843DBFDAA4B23D9AD2
-:102AD00084F628D9230D157EB697A74370203DBFF5
-:102AE000069455C4779219ED577CFE3F23028D85DD
-:102AF0004562B1443F777D21B3FF3D85FC6906A661
-:102B000002A4F74ED0EFB43E78691EC5E34F902E75
-:102B1000C3F5B7B5BC304F253BC303EE08AE3B2031
-:102B200040069B0B03F7D0B8EF9BDCAB0BF1DD83CA
-:102B300013FF3288EC917585C2EEB34B0829A4814E
-:102B4000FEF315A0E78DD9CA7D8545D1384B4FF4EA
-:102B5000A3C733F5F8E6AEBA309716B75722BA8B4B
-:102B60008F3B46CCEEAAF1A4FF9699D8EFFC0B2D33
-:102B7000AE94E7496539EF804E7B3A2F99FDFFEB24
-:102B800035BC991D9DAB7E8EEFDD1014F6D60293F9
-:102B900097FDF5DB338F731CC52E99C047FE505A45
-:102BA000FE76117FD1E3259749DFC6CE3ADB7E6FF3
-:102BB000CF3C668857C1137D12C6D7A3E3ABACFFE9
-:102BC00062F6B9659347E835F2F3DF6FCEAE84D491
-:102BD00044F37CCEF1ABEB83AF1AF8E2C6DAB70C64
-:102BE0007C7093FA9EA13DE2E9B252BC32B2276BEF
-:102BF0003AC5D73FDB6D2F263C20FE0F16C6C4EB2F
-:102C000022CDA3AB60ECB9ECF72FBC8EA3759D8CE5
-:102C1000577DBFEFD4BDC9F5485D84CBF8FDEAF11F
-:102C200011BD4471D844F6CC5D12CA0BF277495EEF
-:102C30007862E405401ED9FF7749A3BC44EFB6FD96
-:102C4000C147A9BDABDEEEDEEEE3F808C74D6A91E1
-:102C50002EC86E00A7787F81CDC176E81D3EE12F9A
-:102C60001EADF8EA06B25F7320D58B32107FC27FAB
-:102C7000A2B8C97C531AEBFFD55907B8FE61338857
-:102C8000BC514DF821F25797A6A60ABB58C1FE5871
-:102C90003F9161E6FAA11181AF981FF3C39CDF5801
-:102CA000DA5FC4F3C01319447CF833D9FFB5E05799
-:102CB0007780DA6B32D0DF46FAFDC4AC8E35116B0B
-:102CC000ED1A70AD05F1FE49B2FA395934637CFD55
-:102CD000AE253FF3139BE0DF49BB4ECF53113E1FA0
-:102CE0009A24F6CFD5674C1CAF0167C4568D7ED8A9
-:102CF000038303561F8EDF66457BD2299ECF1E13AA
-:102D00008DCB9EB0624971D024513A7DC2EE75F9E7
-:102D1000449E532F4710CCB09CE4D3E57CEB708AE3
-:102D2000BF9DDC6C07925B38BF42FE96FAAC88E32D
-:102D3000F7CBF02F028117F71A5CAF6788FC05F11B
-:102D40009F4742BF16F721FB720CF167726053B1C7
-:102D5000FDFD3DF66D84BFEEF51E16F1B0CF9A472E
-:102D600073BC5BA713D9A7C5BD7F0C20DA2FDB4648
-:102D7000ED8B5F7EFF1D8ACFFDA63030D487ED0B33
-:102D8000CC7231C9C9C5A91D1CA72BF6C93C2FAEF1
-:102D900097F78B72AB117D7158EC88705CEF6CF11A
-:102DA000FB9EF6FFD9CD9D1BF3395E2D8F25B9A271
-:102DB000CF8BEB28A675E8FBD4D7111DA777FED1E2
-:102DC000E3D07AFDE387D60CD7F20837FA13E8E5AB
-:102DD000AB743AB6268EFBD768F88CC74FC18860B3
-:102DE00088E3796E703760FD5A0D4E9FCDC3FD703C
-:102DF0003C44194FF85D3CDBE92538EBE3F7CB8029
-:102E0000C053BDCC73C548FF1CA2BFDB82224FA0BC
-:102E1000B723FD893867730AD3EBE2E7DE7AE7E789
-:102E200038CBAD8F8E2924FDA1BF1F0F6784EF70B3
-:102E30005ACF0249E4CF10BE37D1F8F1F981F385BA
-:102E4000EB89EC4ED60B27B6FD2C44EB3B91056E7F
-:102E500013F2E3E27DBF7DD33496E8C41996B084C3
-:102E60005DC6F857BC9E7243E03A92237694236481
-:102E7000DFD8F5F7065A0CEF55672A77F9D81F55B2
-:102E8000EE2679645785BF362450C1F5E556E1AF8B
-:102E9000EDEA34CBC4DFBB2C10223DBEFCD50C9533
-:102EA000ECC7E56877B0A79317E4F54232FA41E939
-:102EB00009EC069357E6785C5A600DC14BFAD1D401
-:102EC000079FC889FAA3BABE2CD2F4BD927F6303D0
-:102ED0008DEFD3E281686772BCB314029A1DA1C55D
-:102EE000E19A0F701C4297DB3698EBA0F8CF9ABEA0
-:102EF0000B1CE41FCA382CC7D73CB3D3A0173B72B6
-:102F0000551D4ADA11D1BAB5073F5E3F1FC06BECC1
-:102F100047DB0512D6D07AD5814823FEDA3AEB7723
-:102F20005D2F60D932E691C84A6AFBE6B44476A4C4
-:102F300043B303B8E847EB14EFD906AEBEC384FA37
-:102F400033D96B81F763F4A00339FFFD3C6D5EB2AA
-:102F50000732BBDBFF4078EB691F17AB24F8BC6F6F
-:102F6000EDA5DDE6AD49240F12C28BC8C433FD18B0
-:102F7000D16332C4EC9BED9E98BA14072F89CAEE38
-:102F800076E57482FCE577DDD7AABAF0AB1F1AECC0
-:102F90008110AFDF6AF18317E9C9E6C176C3390C46
-:102FA00055CB7F220117C7ECEF1CF64576B955DBF0
-:102FB00097F522EF8BC6F5F7BBA4D7A75EE2EB0B24
-:102FC0005FE2F885EA4B1B7E4AF5A50D3FF5125FDF
-:102FD0005FF812C72FCCBEB4D7A7CCBEB4F1AB5E9E
-:102FE000E2EB0B5FE2F885AB2F6DF829575FDAF063
-:102FF000532FF1F5852F6DFCAA6C073ACB81CFCD0D
-:10300000A6379A4374CE46AA0A73DE3857058E4710
-:10301000A73603E72BB67B851FA5C7E947D2103239
-:10302000FA2D567716D9D1DB1BEFABFC318E732A04
-:1030300013174FF9FCEC230A8DB36D1A70FEC2D939
-:10304000F8D1518A7FE540D81BCEA1B89A04E11887
-:10305000BBF4FA600A8463FC896AA58FA15ED43947
-:10306000C0D0FF964D430CED37B78D36B4FFA8A9FD
-:10307000D050BF492D33F4B7434E4B1EE55D1B2D99
-:103080005ECA8359686FA567C20D76D8F83D05FF03
-:10309000911F9383167DF7B8B88F74D56618D7192A
-:1030A000D77EB67C407C3E614EB1964FE8FE7E41B5
-:1030B000BC0F6E4FC2B8A79E4FD0F139DC92C4F856
-:1030C0005AA78A7CD39A69C28F9C1A729B286FA9CF
-:1030D000E36FB44672FABEB7D519FDC9F446772539
-:1030E000FBA34DC0F9DCDC2A7348C9A138C1C04A32
-:1030F00007E239B443D04708047D841A81F385A1DF
-:10310000AADC95D47E2A047C0A46A78FD1550B678A
-:1031100052DCB53EBB5F16C51972AA043D2CDD6BAF
-:10312000A4034AE7D256D30F4BBCFEF4FA8C02CA72
-:10313000E79D819727049CF5F3E7E97170CFDB6188
-:10314000C44B3CDEBE2D5ED614C77F57F2EDF06255
-:103150009B2177A4519C540599E2322F660F373397
-:103160001C9ABC8C9F19D88DF830A70938DF134FF3
-:103170008FAD7510AE8AE1DF1C6F5821FC4C93F2C5
-:103180002B99CFF0DDFEC0A744195FDB9A44FE16F1
-:10319000CB641A1FF6CA0328AE105267F3BAB737CA
-:1031A000DB92E93CDF57F566A0F3F2DB73E40194B0
-:1031B00017DBFE8C696EECF920A40ABB3993F7612A
-:1031C0003797706911A5A2956011ED6189EA835660
-:1031D00098E3F0A94AD49E3E2339EEB962A2FE5B81
-:1031E0008A73193E694A86015FD61223BF23180FDE
-:1031F000E5A37C1C4CBFCB4457824E42AF4BA195FC
-:103200001C5FE932D510DD68E72DD257CD06CA47DD
-:10321000D567FF742ECBAF7A1BC31D5608BAD0F307
-:1032200082D6264187F1F4E3F21AE9C72A0D3489E0
-:10323000FC96E01F7D1DDB146DDE2C0954967BB6D9
-:1032400001C467D6B8F1EC243C49DE78045F3A61EA
-:1032500036D07BCE123BE7B1413ACAF8B74E00E810
-:1032600013734E217EBD675DE777A4F30FBF239DE7
-:10327000EBF267AD57933F45E25CE429A46B8A1FEC
-:103280004DADEA04FEFE0ADC26A247A4835959C5C7
-:103290007CF4817F76911CB213BCAAD3A8DDD5A99A
-:1032A0004C25FA9D2EBDA2B8709CB587059DA37EC6
-:1032B0007989EAADCD16A0732628674C3FA2794BD9
-:1032C000EDEE952479A481E369DD853E943B1447B6
-:1032D0007CC5282F8A3A8D70CB8D97EB3DC0B127E6
-:1032E0003D110F47D7040D8EC508C721DF1E8E364E
-:1032F000AFD0C3E92542CEBE98FD537ED57D589C04
-:10330000AB495780E1FA852AF4F274E97898E4CB66
-:103310003A05E50BB6CFD0DADD25429EE870CED572
-:10332000E0ACCB9375F32183F8DE4DF2C44970FD18
-:1033300088F5765B9180334084F39FA98AE09335CA
-:1033400056F0529CB6ADD4E9A57861AEA2C1B7499A
-:103350008397094C04DF78BA9421A68EEB4B8DAB92
-:103360007F5BF8964ED0F4643F283E1FF8AE4B4981
-:1033700015FC3654C0C7EA8CF0B9E6A61C8B77253D
-:10338000F275470EC21BDB9B5E17F0FEA5D67FD5FC
-:1033900018E07A53DFD5990CAF9C859944CF4DD670
-:1033A0003695F2584D3AFD69E7C25C9A9C9886FCC6
-:1033B000BD00DF5F8DF289F290A92501078DD794BA
-:1033C0006F0189F7BFD99B68FF0E9FCD20072FABF8
-:1033D00031C235250E8E49DF91FF7F3CE1BBF1FF05
-:1033E00076FA15FBAD1906D0C979C89083E0642B35
-:1033F00099984C74D4D2BA9DEB32849A7271FF0FB3
-:103400003B85FDD5D23ABBD7F351214D2E6CA97324
-:1034100070795F9D9BCBB6BA4C2EEFA993D97E698C
-:10342000ADCBE3B2A5CECB65535D0997ABEA14EE05
-:1034300027ADCDA860395C051CCF5E99F239E7DF76
-:10344000E3E7CB518D7A6C706DB201EE7D6618F5B5
-:1034500055BA62D457748E29B6DDE51D65684FC92B
-:103460002B30D493E48986FE5326047E3981E48090
-:10347000A7324E0F223F8E899EB36B6915DF4BE951
-:10348000F0D3F59353E3F33556EF00CA3B395B05B0
-:103490009F366B765E13C111CB6405F8DC8CEDB002
-:1034A000E40D01F1FF6AA6F38771EEFE488B1DD98A
-:1034B000D7286427B4C8C28EB78238F76BCBF4879D
-:1034C0006BF07912EA2FCAEBDAE6A6B05C78D8E3A3
-:1034D000F4D239DB96D6656E5E8F579CA771E3BF39
-:1034E000447980F8F3358EA1C67339D6B39C6FFC4E
-:1034F000754FF4DA9491508E9C2167BBF32FEF6BDC
-:103500007429F22FF778043CED3DC8A3D6387BD957
-:10351000A9E55F60A02F61FFA83D25F20BAD717199
-:103520007BF4C312E66FDE9A2071FF3F4F9085BF98
-:10353000660903C96B9717DF8FF53B14F17DE8B976
-:10354000CE8F3F3E4F8C7C0A2407FE3C019F2B4FC1
-:10355000083B254916DFA1D84051583E81C887D085
-:10356000591FD237A95ABEA75BCE908888A13BE7E6
-:1035700019FEAEC88BD06716443F96E8FB17C4BF50
-:10358000FDB66523F9C3C37A69A7FC5002B9E02AE6
-:10359000D1BF1F832E4F3180EEBA23FC5C2589E119
-:1035A000172678359AD6CDC8C5E7A95E8B173100A6
-:1035B0001525F25E3A5FB14A4965FDBEAA446E2701
-:1035C000FEF942717A091FADF955ACAC93867DC8FE
-:1035D000A2B7B1C4C676BA8E87246D5E444F679594
-:1035E0000E67ECEFCC9B11ADE37FCD6336725EAF1F
-:1035F000E5AA4738DFD732EB3F38DFB73A6B7A1EA0
-:10360000C9BDA492E9C7F82097861F660DD2237919
-:10361000C6FCDEE9D3A2CE70A0F8849607048F31F1
-:10362000CF6791FD86F92F349E60A0D0436051F89A
-:103630007B8333E95BF0B5DEAF673E50F5EF4E5765
-:10364000D2F9E0268F90A34DE07D3340F55724AFAB
-:103650002AD3F38237E9BCE9EA8116C6CBEACCD992
-:103660004DC28E177E53936725E76DE3F5369DD7E0
-:103670008C95DB745E3356BE37C9B37BD5CB59010D
-:10368000739CDE37BE9F1D34EA1FFDBDA4CC2B5FAB
-:10369000AB8A392FD56CF13B485EACF2DC678AD53A
-:1036A000730F2881052531E793AC99B3F83D7BB6BC
-:1036B0002FE1BAAE50948544DFB8FF5EED81F59AF4
-:1036C0005CDCA8E997B3ED7393D6FF01ADFF66D23A
-:1036D000EB23A2F8193EF4F26496CFEB441C8379F5
-:1036E00020665EA524B082D615C5AB390A17A4D3CF
-:1036F000E1F957B0DDD1B06E7632E169E7FADED795
-:10370000A3E7D5F57E7A1E353EBF6EF3980DF0DF48
-:10371000A3C985175C0B2B1F40D0EC6C13F4D4B0FD
-:103720004EE891E14F887D9C4987C6F5EE6CEBDD54
-:103730000E8AEF4F91C56E3AE17A465C7D405CFFA0
-:10374000DCB8F65171ED0571F58971FD2BE3EA578F
-:10375000C4F59F1D57BF36AEFF82B8F6DBE2DA979D
-:10376000C5D5FFCD884FDFB56989E0188F3FBDDF34
-:10377000B9E2EF5D5FC57EA2A3E13083E945A7B75B
-:1037800073C543D4DEF5339DD94A46B17CDF81F65B
-:1037900015D9433BDB2ADDE27C4760E56E8D3E4870
-:1037A0003F58368879D0CE4AE6F89CD36390236799
-:1037B000C3B709328CEDB17668EE85C7F7D9E93326
-:1037C000A4D917BDAF5BE7E32913FC27490E414895
-:1037D000F899BA5DBB4D15FCB34D5D50B99EE46DD3
-:1037E0009359C49FB5FB50E86E1D11270F684A38E6
-:1037F000C2F18426CD4F68D3E4C95A4D9EDCADF9A1
-:10380000094943839B28EE9B7C988FE740B3AFE048
-:10381000AF0B103FF797166FA3EFC7EE1E53F2F8EA
-:10382000C35877FD5D827021DAE9635B14B259DA1F
-:10383000948C243A4F946272B4939FB8AAB0CD3F4F
-:1038400014FBADDD7FACFD79C4B39C69F3A2CE0758
-:10385000D9D265227A837C2F7F9786EB54C9C6B272
-:103860009677D5253A77BAF60AB7898CB0F419B2AB
-:1038700099CE11F79910E85B8AF018DC046605EB25
-:10388000196A98CFE25C532A0BFFEA196428DE6FAD
-:103890005716C1EBAB66DB7EAAF68C0F90B438DD11
-:1038A0007995FA38698234E887E38EB245ABAB8FFD
-:1038B0006CA6F3D04E49D4A73CF3F8FC95F9D1FAA5
-:1038C00098671E1FB812DB5B0B0799489EA67B52B8
-:1038D00013DE137375A9909FDB9B170E4EE48FE9DF
-:1038E000A53C13383021E76B25D1D4042C876AA579
-:1038F000AC3DCF14F52B35B8C9B55ABB4794177AF0
-:103900009EF8F1E794BA753B7B809F8D6CC877F683
-:1039100033D88B5797F6622FA279CCF1DAAD56796E
-:10392000009D23DCDA6C03BAFF616B3688EF905799
-:10393000D9F8DC2858DC03AE7145D71D5AD56F1E67
-:10394000D14DC80486386EA6065FFB4493768EF28E
-:103950009B307DC7B755CBF36C8588DB9D1F8BE70C
-:103960005FCD27BCEA78DE57FAAFCD449F1DD90B57
-:103970002B37E27BEB1ACD1C3759D798CB744EE32B
-:10398000907D746AC52133D9ADF9D06E263B7F1482
-:103990007D793D84AE400A70D9AEC9E7FFD4FCF80A
-:1039A00061A0F0F341D0C5C0F9B438F01382CB1058
-:1039B000126D12F18FDBE4C07996EC4BAF48A4B7DF
-:1039C000EB4AF5EF7AA1C652ACF91732C3B78EF8BD
-:1039D000281EBE74429FE38E8ABF9EDA9D7B5F0DD8
-:1039E0005F86D5DD6F18E993F0363B46CF6CD4E0A7
-:1039F000E7F6FA15C2E1B5C581167A7FC9A6BF1EE2
-:103A0000207354565533BDFF14E11D9F2F0C07A79B
-:103A1000D33063BCE14AEA3FBA76DB7E8AA7E5058C
-:103A2000EFA8EC8FEB1BAE54577A888694C0FD3418
-:103A3000CED0CE48850BEBCE4DAF86B3783D6379C3
-:103A4000BC5C7D3D480FD54C476E11C7D7F04BF895
-:103A5000A773CB0B370BF8607B16EFCFE2CE8A5DF6
-:103A6000FFB669FDF8BB8578BA68D5E0F758148EC3
-:103A70006035FA358F2582A34EA73A3C6E78A26B4B
-:103A800015E53AE7873A5F2439E8DFE49EC6F2B0ED
-:103A900038F024BDEF6BF337701E7057275D47D4A5
-:103AA0000D1FA7D249D7BB603FE569C2FBD615EF12
-:103AB0005772BC782F88B8589C3ED44BAB129F6786
-:103AC00010F7E58CDB6BB493915E958D9E587A353B
-:103AD00073BE33A4E9935013D22FCDB742D06F48B1
-:103AE0005DE64E44678F687A658746B7FAF3A13D75
-:103AF0009CBB3C54DAED27664A46781EEA8DEFD32C
-:103B0000C0CBFC807C7084FA65101F607DF00A37A2
-:103B1000D3A7CE074BF6FEF500DD67E3F4C905B188
-:103B2000F7D745343C227DBE43EF2FD9D475807C36
-:103B3000C5C12B047D7E4C77871545E90CFDC7F781
-:103B4000A89F4E3FF1FB78571B4F2EF67F4C785CB9
-:103B5000B829C8E321FF1C2BE5713AC349CC724A4E
-:103B600025ED676B1BB8693FF65F1474905C3855A0
-:103B70006B62B8DE981F5E65C6F2FAA160A5EB869F
-:103B8000AA33916C72298F6BCCFF0D6B33E20FE976
-:103B9000E76F344F91276013C1EBA08DE5690F7477
-:103BA00011D57BAA0EFF157172D73CB1177A3ED79B
-:103BB00071D7162B8E8945DF621DE7D84F8F379D51
-:103BC000193F1DC5FE434BD36CFD9CF00CBA8F67AB
-:103BD0003BC54F11AEAB9A7AB7572F58FCB4F9A436
-:103BE000889FAE008E03AD4C196B4A44379740FC5A
-:103BF00074CAC444F1D3C87B063B735593900B3A07
-:103C0000FC86578D4C16792948A57C891E1FD3F751
-:103C100075B7664F3669706B21B8313C05DCDA0840
-:103C20006E0C4F1D6E33843F425F8853BCD66316C3
-:103C300079B1910B3651BEE054A6C893D767DB44E7
-:103C40007B8EC82F9C411F9931F634F2C19A667160
-:103C50009F08BECF79B517B30F3886509E33D3CCAB
-:103C600071DAED9EFB6AB6733D99F9CF0A6A5B1E65
-:103C7000CE3BFCC3B9EA027A5E62E773F27A3EA7F2
-:103C8000A5AFC8E7B8F2B47C4EDC7C76B8A9B28D9B
-:103C9000E6CB137E4B8F74ECD3F2115A1E2823DF30
-:103CA00098AF70C4E52BE2F3956B9A17ECDF2EE228
-:103CB0002B2C9F87FF7824FB63F1F3B8671AFDB7BD
-:103CC0003523753FEA1147A2EF1852AB8CF4D8A206
-:103CD000E1BBA1AFC8479C6D7C284F36F8552D79C4
-:103CE000E71647D0FB911FEA4ED03FDE0F3D1FFF86
-:103CF000D6CDE31BEF074CE0DF6E99C8F11441DF2E
-:103D00006B9AC5FEBBE3699A5FA59F3FD2C7B16AB4
-:103D10007E1CD773A2724ACF870D75DB985E876AC7
-:103D2000F74535FC7B4A68650EE5D76675513E72EE
-:103D3000E80E89F3EE439D7ECE43746C98CEF9F184
-:103D4000BEC981A727C6C49F76B87E9AC9F9022D3D
-:103D5000DECFF7E6A0DE53D715762A64EF8E04BED9
-:103D60006727392E1F107F3F4E7C7D4E99D0C39917
-:103D7000D741C27B4F3E9F28DACFF4DFAF6038A136
-:103D8000BF9B2CE4ADA2D7FFBFE4A976B61DE2EF3E
-:103D90007D4EF94093B3FF0997A29C3D5112389E86
-:103DA00050CE5ABA58CE8627289F919E5C4E177DDA
-:103DB000101E6E4C7C3F8F5C76A9E2E16981877CA6
-:103DC0001D0FF75C92F942C4437659223CA05F452F
-:103DD000F06AF32983A85D29510653D98D8F1F26D8
-:103DE000E68B5965C2EEBB58F858A7E1E35EC207FF
-:103DF000C769642D4E93C7CF9B357CAC39031FEF49
-:103E00000B7C94E8F878EEBCF09151956168779757
-:103E10001BF191EACB35D49DF9467C240F2D308CD3
-:103E2000B7BC4C16F7240D9C68E877263E8CFEC084
-:103E30009DF45E2FF6E8C04067057D4B34606E7BD5
-:103E400007C9E64C7F5B0595FA3E37C7F9737AB927
-:103E50005CC35FE6D4C4F85DA0F15BC644E526030D
-:103E60003D7C2F317FD668FD979728B794C5F2F334
-:103E70009589FB2FD1FADF3641591CDB1F7FD64BCA
-:103E800031F6784FFB0E242BCBCB78FD224FB6A317
-:103E90003E95F3663B92E476CA57ABF54EC3BD75CB
-:103EA00083E937AC67FEE89B0E95CED9D13D4168DA
-:103EB000596DBBA35FEE1A6CDA96317C25C1B1A9AE
-:103EC0006C88B8BF7591FF6DCAEF28EA09ED1CD266
-:103ED0007CBEEFC814EE63A27BB2C09D714EF92385
-:103EE0009467E25EB7C120BE238620EB41C90FE98B
-:103EF000F4DDB205FC225F4EFDC5F785BCF9140860
-:103F000073DD0511AEA7697EDE0365393C6E3AC8E4
-:103F1000260124AF89E4A8CEA70E4F90E9DF53EB2A
-:103F200036AD245FCE0250467EA073207FCF0B9526
-:103F3000A0523ECB040EB6334DEB0F7CCD793AFD4B
-:103F4000FBC397FB88EF0FCF717FE7DAAF91EEE508
-:103F5000F344EFE56BD4EC01FD5E3EB532C8DF976C
-:103F6000AB2BEDEE06CF99DF973F3A31B08BF0FDEA
-:103F7000B7A4412191640E4E98EDBAA0E3872FF2C9
-:103F8000F8AF5CE4F1DFEC6DFCBBE9D752CAEBF9AA
-:103F90008F123F37B88AD9EED4CB78BC5DA12811F7
-:103FA000EA27395E1BF0619FA83DE73C6A627FA863
-:103FB000C124CE9FA9EF99D8EE827C41074E19F219
-:103FC00072C645C7717A838345DC49C45FEAFF74D2
-:103FD000D708B2BF7F99322B9286E31D7C55D87FDC
-:103FE00096A991CD74BF73FF349B773BF2DD3DDA28
-:103FF0007AEDA513EEBD137FBD798A90172E8BF74E
-:10400000F2023EB7343342F6A3ABD82253AEC01906
-:1040100097D76CB5B42553BCB275C77D15A3B0FB5B
-:1040200063752FB91B137CEFE9D4F29A23A5C472F0
-:10403000F09F939244DCCB67BC4FD85AAE9D2B497E
-:104040008554B2232DFF52D2129D07D04B7DFE2204
-:104050004FA48ABEBF8ED0256E88E7A292EAA464E0
-:104060000F9F8BE824F8567AC30EB27F1F5F10BCF7
-:1040700035F6FBD3D61270911DEF9B22CEC36E5046
-:104080002417DDAFF160C4C2F78E3FB8E8E9E6144B
-:10409000ACEF3D6A76133C5AFDEF3993B1FE388E92
-:1040A0004BF2EEE00E71CE529D0FA16108BF56F2A9
-:1040B0002AB1BE5B11E7B2D9212BD6AEEA43F8FF95
-:1040C00075725F016F0856D3BD9DEB5226F37D9646
-:1040D000D973443C78BA74B483DE7FB0C4CEF81B85
-:1040E000A29DD331A9D57C9F65DFF9C6733A0F2E07
-:1040F000EF5409BFEE52BB5BE5F3974ED7587CDF18
-:10410000F5A8192456715D3CF974C929D6E5157EC8
-:10411000EEE37258A5FB8EFBE27BF56EBE35D170E7
-:104120001E68F726E19FA68D777A91D271BD71E75F
-:1041300085F475B5E1BAE8DE63D7508E4764CC31BB
-:10414000AE2F2DCE6F70C6D5A79677DFE3339CF0E8
-:10415000FD85FFA785AF71AB574EE47FB6D64167AB
-:1041600055CCB904670F71C09AC982AE6D592F380A
-:10417000C84EF9C27FC4433878E59F073EBC97CA52
-:104180007FFD6ED75284CFEFBF7E73C793B4BFDA83
-:10419000BB0F11BDEAFE189FC1C4F5BC586D63B8D2
-:1041A000F96768E7397D1D2F587DDCCEF9A5B5FB91
-:1041B00093B87D64398492B07DA445C9BA99E8AEBC
-:1041C00053F2D6CB3488388FA8E37FED0D7E138C65
-:1041D000213CFA25BA0F639A76BE76C3229009FF76
-:1041E000B645ED7C5EDDB75C9C57F729D5497CDE92
-:1041F000748E99CF87D4575F73F930ACEFBA5CDC1B
-:104200004F3563B9328FE75704BDA475169B9713DA
-:104210005D6689FB9AF4F3A645D0C5DF7F8CF4B6C2
-:1042200077D848DECC4700D3FA5A357C69718322AF
-:104230005FA74AF6A4CB6BC463461CDEE2F1BA4228
-:10424000C7E34818497894A12D99F4E14300ED742F
-:10425000AFC086E54FCFA3F36C5FA8690CAF9EF8A3
-:10426000F91DB4579511740F8B83CB4EB457A9DC4D
-:1042700085F62A95AE60C575CB71DD7BDE38F8D248
-:104280000F71BA594AF5957444AB48CB7B81BA7427
-:104290005025AEFF06E25E51DF4289C4777D92A1D0
-:1042A000BED66389FE3D00FCD595A5FF7D80D35B1E
-:1042B00094A108964C8B968F11F559E487C4B4EFFE
-:1042C0009E69EC5FB63F66FC81B8DEC5366E0FEDC9
-:1042D0005BBA45B5C4B43F87F572805735FBF1FA38
-:1042E0009D66FFF604F2EDDD7261475AFE052AC9AC
-:1042F000B52FD14E23FF5E322B2CDF21D72227BAD8
-:10430000570F00E561AC5F2E1BE5EBE51A5F58FC2B
-:1043100015A0E5C7E01B3DFE803F7BFE388BEF63B9
-:104320005A35C4C2F70FA13EF0F696AFB3782C9F72
-:10433000C6DEDBF5AC2EBF87C1309AFF4B28FF43AA
-:1043400005F341CCBD0DC4F76DCF5FB614E7F11D89
-:104350004DE638AAE45A9FC2F731D535B13C7F40CB
-:1043600009FCB63CE67C4963FAC242922FFA3999BD
-:10437000E8BD47D798BFCDBDF71DD50780F4C297DC
-:10438000485AF65EE8B0B16EEF115AC7EABA762E17
-:104390009D6E85858DDD12E4B8CF154AE04FB43EA1
-:1043A0007B26B6C7F089D58DEF19FC0EE37D9CB254
-:1043B0003BE224B86F28F9C049F3B71E167CBDE173
-:1043C000F0EC24E2BB56EFA124E29B2FE8E2C7EF1A
-:1043D000C0273EE5559661BBDF48BD9EE8674F4369
-:1043E0001ADB150797DF7F2DF1CF8DBFF801C3BB17
-:1043F0009B6FE0E14195CE18BE818799AEBBF9462F
-:10440000ABF7CC377F67BEDADDCD37A2EECB074303
-:10441000FDE04C63FF6EBEA0F1912F1EAFB073BBE9
-:104420007DD2C35BD418BE3A49F558BEF909F24DA6
-:1044300002B93F7D9246DF17986F522E32DF0C9DF6
-:10444000A4C9CFEFCE3763275D14BED9633A1FBE30
-:10445000B9EC4CBEA99AD4F7DBF34DAB3BCCE7E902
-:104460005AE79813FE7D900F347939757EA0B28D8E
-:10447000EC1A45DCDF374D9A99E5F3109F497487B4
-:1044800034EA4FA1CF0F5EDFFD7D06EB67FDFEF541
-:10449000F58450B293160BBAE9AC1371DF6952F987
-:1044A000B4C5A477E93B024A3553F694EC02D4FB39
-:1044B00032D985D05EE1C179365499A04DA62D0739
-:1044C000AB87F1F861B6CF8668717FA7942FBE677E
-:1044D0009A29FEEE85FE5D4CB562BC5FB6FF59ECD5
-:1044E000265C770AF931EE12F17750164D8AD7BF64
-:1044F0006887E0FA3A07DA984E362857F71A273ACB
-:10450000E35CB52F98302FF9D6249376CFBEF233E3
-:10451000A2B3DD6F6C49A673127B24E0F339F383F9
-:104520004FCD23BE73A942DEB4AEF833A52361D7C5
-:10453000B41F1AF5347C6AD4D3F0A9514F6BF51E21
-:10454000E58D7AC2A8A7B57AB79ED6EADD7A5AABCE
-:1045500047E5CDA7063DBD61D2A70679F31ED5CFAD
-:10456000414F1F9E7471F4F4A88B2C6F9EBE70F2A5
-:1045700066DFA4BE1743DE1C392F79937DA6BC39B4
-:10458000743EF2C6B5B943A5F4CCC21EF8A056C31A
-:10459000FB5B65CADB343E949C5BBC269EBE3AAA9C
-:1045A00017AEA6BF2BF3A557F87F3DBDEFAAFDD5EB
-:1045B00091C6183FDC65E914DF23D4EEE1E7B76C60
-:1045C0007E95E3B1675D2F5D105A74A65E45BBC84A
-:1045D000C1F4EB35732EFC7CD7D13A47F0DB95CF95
-:1045E000DEC1FC945C6E9C4FB77F3BAA6D669EAFAC
-:1045F00044C8E99EECA19EE6FDA05C16F7FFC5CD80
-:104600001F4FBF489FE9938B981E2D742FF8179D5D
-:10461000C07FA7EABF4E6EFCBF8A7C49E9C51193F3
-:10462000CF834EA76BF84CB06FEFC5DDF705E3CF36
-:10463000E993CFC38E3E4CFBEE9B70DFDF67385EA5
-:10464000B47D5F30FFE1E6F3C1F7BBE5DDFBE6EFEC
-:104650005132B47D6FF8E735EF515C63C3BFAE7D77
-:104660008AE21AF77D9DB78DE21AFABD726910FDD4
-:1046700091F5EF8F102E2EBFF89E24634ECC774518
-:10468000C0FE7DF4BB13B2377CDDEDFF2BF7CA9182
-:104690007DD2DBBD72AD36635C4F2FAF2A17F64A71
-:1046A000AB691DC72336A05F558F78EB9823E211C5
-:1046B000AD68A7B0DC9953D0AB7DB4AB4EE1B85335
-:1046C0006B9D9FCB7BEB6670B9EBB5256524777D41
-:1046D000AF2D62BDE7F3FAAF7B1881E4AEF8D049A5
-:1046E000CFEFF5E8FE90B05FD2C87EC1FAC393D792
-:1046F0006F8D8D0B8CFAEFE15BD481D178555B66C1
-:104700008CDD23C7FA51A012B944FD28AC1BEC9AEA
-:1047100011EC47ED26BB06EBED934718EC1A7D9E96
-:10472000B566A821BB66ED0EF38C4476CDACF2C421
-:104730007E14D6390FE27039F8FB7F49FBFB5F51DD
-:104740007EE9DDAEC99D7271ED9ADF4FBE30F18713
-:104750006E3ED6EC990714E50D4DAE7C47F9B1D10C
-:104760004CF1E36F2B3F4692FCC837C88FCFCE4742
-:104770007ECC2A771BE2A20765B5CF58B2D37798D3
-:10478000A15ED6F42FD63BD1AF31219C7E5221B110
-:104790009FB3C10BFCF7FDA64BF35F267AD8BDC8CB
-:1047A000CCDFBB3FA88873220FCD11E7A91E5E5E48
-:1047B000309B3E235A9772C3DD4914D72E17F70456
-:1047C0004C97CA39CEFDE00C61E7643BDB2FA7FDB7
-:1047D0001FACB000D1D5D9E2DC146EE778B5E6475E
-:1047E00081B499FD0ED70F2D6E3AAF1A1FBF769682
-:1047F0007CCCDFCD83F40A7FDF7DB6F8F5B78D5B27
-:104800000F98F29DE3D6CC8F35CF0DBF41759E49F1
-:104810009F4726CBE25C620F7A2C9E9F3BAAA7A7FC
-:10482000457A3917E524FB29E61E59FD7BD659E563
-:10483000621E27D94F8551BAE8A82EEEF55EDA94AC
-:10484000DA678EC4E685522CED3C5E4AED3E7EBEB4
-:104850009ECE2F90CCB27859AE3E5E89F239C178A7
-:10486000FBEA8287092EBFAEAB3D4C71EA49964EFA
-:1048700089FE9EEBDE3A95EB7BEA9AB8DC55D7C60B
-:10488000FDD6D76DE2F2BEBA103FBFB7EE31AEDF54
-:104890005DD7CEF5C773C53C132D211E6752178E09
-:1048A0001FC30F659FE03C31782E8DA886F6096FF7
-:1048B0003619DA8B3ADB0CF5BEFE4D86FE7D66843A
-:1048C0000CED6F950502538AE85CC363867ECEFCCF
-:1048D0007643FD5CFD850BDD6F654AAAE51FC8AF19
-:1048E0008302484F4867E9B5B2CA79F31AC197FD08
-:1048F0006BBD61AA6F71D998BF75BAE433CB26B18D
-:104900007E53CC3DB51D2E717EB2A1AF88A734FC7D
-:104910004CD4B76489F391C3AB447EA461A0B8972B
-:1049200044CFC36F7169F793F8C43D1A83F223FC37
-:10493000DDED20EDEFC139CB45FECC0D6ECECF378E
-:10494000D481F67D6284F31D1960F68AFBD5159932
-:10495000FF9E920542F5385F43BE5BBD85E44C3057
-:10496000D56BF6F29F960D99298F48E2899330ED29
-:104970009ADED1F2F2491F009F3BE886CFE7E27B47
-:1049800084DA2EBEB7A97F6D17E7E3B6FC42DC637D
-:10499000130FD78E5F7CC5F72A6DFDD95759C4D444
-:1049A0005BBBCFED7425C57E8FB6A52695EF5BD892
-:1049B0005A9BCBE728B6D688EF8D6510FBDDB2C8D1
-:1049C000C6E730B6D69ACD24274F2DB2305CF4F529
-:1049D000C7CFAB7FBFB94E3BD773AF76AE67AD766F
-:1049E000CEEA6EED5C4FB376CE6A8D763E76159D3F
-:1049F000EBB1133CC5B99EADB50B14ED3CAB7E2FAE
-:104A000003C35742F8F2772A56D86B1A07F4870C7B
-:104A1000196EF1DFC7665425C79DE7319EB74AF589
-:104A20000D30D49DF9C6F356C9434719CFA90E34AA
-:104A30009EEFB1798CE77A2CCE4AE3F9D058FA444C
-:104A4000609A566CAC27FC77FF7D477AD88FFF7E43
-:104A50005C37FD86F47340129D4349637ACDAC12F6
-:104A6000F499A17D0FE3864E2E53915EA874529E59
-:104A70005DA273902AD351F4FB37A5577A3ADFBF72
-:104A80000720AD4CFCF700F473087FD1ECA8A553C8
-:104A9000944FA71445E7BB7F8A723CB6AE973DC9D9
-:104AA00085FFADF2FF01C18CE32B00800000000008
-:104AB0001F8B080000000000000BB555CF4B1B41B9
-:104AC00014FEB2BBD144A35934B6865A481A520DCB
-:104AD000A4B06D37A225D2D5869283C8163C78E85B
-:104AE00021879CFAE358E86D635B904A24A9422F22
-:104AF00052C8C11E0A821EFC03621B7A8E680B52CA
-:104B000029C18AE7405B7A11D23793AC899BC47A7A
-:104B1000E940F2F266E6FDF8BEF7E6E50D68798158
-:104B200090A2DD137D40245A2A3848065468B930D3
-:104B3000305324E9A2FDB5AA94359114C0A9095CAB
-:104B40009ABA1E2F4912D9C9163BFDD4CECEEF8D8D
-:104B500031BB0126252EAF1F39000FB015B3E51666
-:104B6000FDC0C20E9DABC0EF315B0E7E96DC49A549
-:104B700032CA4D01917D69BDDE4BC02CFB49F17AF3
-:104B8000C73D0309F29F3180FC30BBF3D0CD745791
-:104B9000343BE5A33C427B4548E42F5284DC078646
-:104BA000AFAC81F6E7AFDE17258AFB6109B84CFB95
-:104BB0000BF652EC11DDDB1AEF945F28CCCFB4FD7D
-:104BC000299DCF5C1121325DB71F962855D860AB67
-:104BD0005C237EA25255A755A1CF0334E894F70C6D
-:104BE000D347EABAFB243029535ECF0FFC1B8591D3
-:104BF000BA5D805261FBB7B51ECF71376D8410AAC4
-:104C000088751C15B6EE36CB3F866FA360673821DA
-:104C100030BED43D21E7A738BD5F96BB183EB1A892
-:104C20008B25B2478C508F13CE3DDD8D73FC7D6795
-:104C3000FC7502078683CBA22173B9650C72796C6F
-:104C4000F8B83C3246B83C34142E4BC61897408A0C
-:104C5000D7B3D3061E2F63C47763C1F6F1645B59E3
-:104C60006775C78484F7ACCE432AB76BBA17253F64
-:104C70000D7C115DBC190A3D6F2799FDBB27028F82
-:104C8000B91ADDF4EAE166FBD56753E7E24E1B7320
-:104C9000BBAFECEDCF5D1D486CB6F0FBB2D6C740A4
-:104CA00096E711880B58A43CBC0EC529D3FDF4B679
-:104CB00093F7754871E49C0CDF9A0B3F4C1CD43F72
-:104CC000CB696A19829CD524997AEAD46F8F42F90C
-:104CD00034F45560FAE320AB677A223FA8138ED5EF
-:104CE0009B9FE786C92EB5232288E6BC5E6B369E65
-:104CF00097892B202982DC027F3B5C8F6BF618F2B0
-:104D0000F0B960E5DF7ADFAC3BADB4345A7BA2B4D6
-:104D1000125D898C4675D2D66D9C07A70FFC7D77F6
-:104D200040CB33BC17C80FB8433CE7238994AB9EF4
-:104D30004FBB3A997974D7FACF9B2C3B12846FF909
-:104D40001F7DD8672F3A58BD9692423CD7228FF5E7
-:104D5000DA9C5B526F39D97B44B8751EFD716B9F2D
-:104D600056F35991C83F9B4F2AF96FC1F737C67761
-:104D7000B59FF745AA6B46137CAC9FFB891B8D4200
-:104D8000F547904B116FD9A8A0E4E9FC97DAA17020
-:104D9000F796F9D0145F6DE8A36BCD73675B73551D
-:104DA000E74D1041366F7E0ECDBAF32DEA6B4A9374
-:104DB0004773EE34F358AEE24C567122DCFA3DD71D
-:104DC000EB355F1BEA488867FBE6EB797DD38E7F86
-:104DD0006B1FAC2475779EFE1FF0691FBE1B8C8F66
-:104DE000B3EFAF1D6F569E8EFF334FD6F3A23957E8
-:104DF0002E88F3A2F74CFD2FDBA790A6F00700004A
-:104E000000000000000000001F8B080000000000F0
-:104E1000000BFB51CFC0F0030977F3A0F2BFA3F161
-:104E200057F1A3F2CBB851F99E68FC2634FDE7D1C7
-:104E3000E4591820B4233BAA38B158988381410E15
-:104E400088353950C5F3A1E6D6002DE807E215AC48
-:104E500084CD7A27C5C0F05F9681E12890AE06E246
-:104E60004B4036931C0303AF34038307104703F111
-:104E70003B190686A940FA25106F9086E8E3048A5C
-:104E80009D9421CFFD6D42E4E91BC5D4C1B7955077
-:104E9000F993B51918AEE93030A8E941F8E791E483
-:104EA0009D806253B421EC70550686BDBA0C0C8708
-:104EB00095B09B1B0194DF07948FD0C36FBF831104
-:104EC0002A7FAB352AFF8B212AFFB2272ABFD61BA8
-:104ED000955FEA03A10135720CD6D80300000000EB
-:104EE00000000000000000001F8B08000000000010
-:104EF000000BCD7D0B7C15E595F899C79D3BF79987
-:104F00004972031708308941A2061C204040C44959
-:104F1000081A6C8A17A44A5DAA576A2D228F2B6241
-:104F20004D5D6B26EFF0B08DE856FE6AF5C26A97CC
-:104F30005AADD1D296B6DA26802EB61422A5D6B6B0
-:104F4000ECBF415D6D5965A35BD4B5B4EC77CE374A
-:104F500093CC5C6E1EF6F1B371BBC337F33DCE77D5
-:104F6000BE73CE775EDF7715D107FA250067F08F25
-:104F70003DCF170160E6C0335A01A57239C0262122
-:104F800068848BD8F34FD2F2CE30FB06567CE9947E
-:104F90008176578340F59F2F6A8DF7B2EFED93BE70
-:104FA0001A8732567FBC40F59D7ACEF30690000AF0
-:104FB000004A3A56AA09D6CFA6318D2AD66FD7B75E
-:104FC0002D0736DEA91205241CAF287BFBD67A807C
-:104FD000AEC90097C056B538C6CA47256333641BAF
-:104FE000A788C671CAFEB8085DA5407F67D8FF369E
-:104FF0007D290909366ECBA4AF2E47B895AE9B40EC
-:105000008F00DC3626093A7B3F0D449A9752618126
-:10501000C9CAAA6EC5AD29678FD38E7829C35E3BF6
-:10502000E24B2303EF97387861F8C8C00BC05C00EF
-:105030000DA67759580E00B5CFECD7B4C7D7E223E9
-:105040001BFFECF9F3F1A7824E7800B5239E880C84
-:10505000C0B3C9D7D725317C5B45603CC6AAE4B054
-:10506000712A5DFD648ED73F4FB9C3B3FE5310CE96
-:10507000029A8720BBFACB8467965D6F169B393EF8
-:105080009D79E5CCE3E30CD7FFE588E202ACDF11C4
-:10509000B7222E7A942D0FDE83767DCDF4D61B0CAD
-:1050A0003F21C4CF4CC48F15477A74E8580AEB0DE2
-:1050B000356C3E0516F449B94436268C02C8C77FC4
-:1050C000B126B2A65722BD8E32595DF67D74CC6AE8
-:1050D00090D8FB31F3D282CC9E1178487B23040810
-:1050E0004DC9196A6471BAEF9CD1DECBE8F614445D
-:1050F0003A36B36793CCFA45BC1D8BA41F632035A9
-:105100005C9C7AA4979523960C8DE5342EF1E1ED05
-:10511000D2F9C66646D29B6DFA6FAF57E9D95AAF3E
-:1051200041971FA0B93E4ECFFB4377FD1BF65F674B
-:10513000F9353F7BCA9DB73E85E52680048E1789E9
-:10514000F1FE4156B5C7342C8389788F94F0E74B34
-:10515000881706E7571926112F3FB0F1A44317F11E
-:105160006B93B13407B2E0D379864ABD7C16D08305
-:10517000ACE540D91FCFF3947DDA584F7D8042C211
-:105180001B9599A85825707914917BC0403819BE99
-:10519000B2CA055BAE48D2B4BE2E36BFF06CC5D8DD
-:1051A000C99ADE2D78F96B8CC0E9A34C50E91983BC
-:1051B000BE7D67102F8698DECCC60A4E2BEEEC8A99
-:1051C000E1988A3189AD63D097D6F2B2F01794CBCB
-:1051D0006FF53A70177FFCF891A4EE5422CBB87F9C
-:1051E000B0D7EF92D38755E47F759A98489721BC42
-:1051F00056824D1EB6EAB288F3FEF8E01E7ABD8EE6
-:10520000DBFCDC0A2AD59771BDCA07D6ABDD60EBA3
-:1052100085FC53CED7AB5DB6D491ACD7E3001EBCB2
-:1052200084FAF1D2C9F152F631E3A569EFF244965E
-:1052300079B4DAEB29836194121E141DE1DCDAC023
-:10524000E9D662749B4DFE0E860729E7583C5976D5
-:1052500036DEAF12F8380B6C3E71F0B4C9106BD269
-:1052600061C453470DCAADAD25A28872E9E3C2936C
-:1052700003D7E67EB8D21CAED28F172E29D4B53C08
-:105280001B3FB666F0E316849BD35D0DA73BF1632D
-:10529000A53B07AE00F2035FE7045F67F91F629D5D
-:1052A0005BFBD739C9D739FEF1ACB3B39F836A2C06
-:1052B000C7755BA5313E6470DC2C59CAF5B8BF8652
-:1052C0000478CC607480F08F617A66B8F1655D0710
-:1052D000B84F08707D435A919374C1BB4A663ACB6C
-:1052E000747CBFF5DCE410F380B4AFAFD78193F1E9
-:1052F0006FDDB186B6FD2E38BF24446204E76C989A
-:105300008D70BE1B5E9AD30583F777A25E6D907D8C
-:1053100000EFD75B6DFB7D677FBF59825436FDF28E
-:10532000415B2E80DAA9D0FCEF643C380DF1706E41
-:105330003544D97A841B47E13C20CC3ECE61FDEC5C
-:105340000A34C82EFC0E369F7EBC3AED98BAE3CFE5
-:105350003BBBFD60ED3E14928F080CBF2D31B11A9E
-:10536000E1524B208D6BE0DFB5A46B2C0C0E6F4B24
-:10537000EC6F03EFA0EB66D77B37DCD80AAC5D930C
-:10538000CF38A0333A692E108D461880C3A1176715
-:105390005D1C3C8E745D7EDB4F5F5B2F05D233411D
-:1053A00097A6FDF5747500E9EA82BF3F5DBDF18FF8
-:1053B0004B572784827F5CBA52EA24FD75666714D6
-:1053C000C9269793DA4A8BD61FC7667249EA98D6E0
-:1053D00085F212E2CC3EE3C380C8CA8A6672BD176A
-:1053E0000C40FD552DF1CA495FA1574EC6979B5DF4
-:1053F0004EBF9B751C57A171D13CC271E53074053D
-:10540000A25856A81F24E733E7303CC18335C5BCFA
-:105410009D81ED069B8F8CEDD878A87E9C29C27665
-:10542000FF9493C862F70ECCDF3B4E7C59222711C4
-:1054300019797D08CBFA1B2EBC0FDE4E86371CBCBB
-:1054400030FA2F453F49C100FECD5DB790FF2200E5
-:10545000A241765D61AB855FDBF0FFCDC17D9FF33F
-:10546000755BE1740DF52D60FB0DBEB7842F0096C2
-:105470003F1474E25B673C299C00A21BBBDE70EB0F
-:105480007F3BF25316FE5E21727DE3FDBB52FF8D22
-:10549000F6A0B559D01F63783D54FF01BCC6F87221
-:1054A00065D7790AFA3DAE134751BD95F38A940545
-:1054B000AE7E5602B70B017AE52511F7B80D5C0FE9
-:1054C000ED94F6E2BC5FAD90D2B8FFBD5AF13FA4B7
-:1054D0009FBF6A4A6944F2ABED57E60C25770ED5BB
-:1054E000737BD6A977C894687F3F24F786B3E9F128
-:1054F00003E3A769FC2B2A24EF3E2DF7CAB8FEEF81
-:105500007F097CA83F1FAA5785D72631E317E7C933
-:10551000E868654591827E87E1E6B5C8F68339F88B
-:1055200075E6D91C16699ECDE12AF25B356BEF92C8
-:10553000FD788ABD47793018BC8EDFAA595B9A1571
-:105540001F4A84EB5B8A2F99DDDEB4E7EB9433FDD1
-:10555000590E7CAD616E17B586395CAD31318DFC6D
-:10556000DF1ACF3EAEF36CB2E173EA35C7B85EDA4C
-:10557000CCE4C948E091C35E7818DA8EA0BF64BC61
-:105580002D6BF26B7B1A3E8F7676326C4A06BEE943
-:105590001126B0F2B8B8049B35366E4D557B356395
-:1055A00081BC1589171918301A3A2AD10F38F14BD6
-:1055B0001BBBBFC6E6356E8E5FC3767935A9EEE7B5
-:1055C00058BBB14CCC49ACDDE8636BD7A29CFD174E
-:1055D000B41351105B3736A01FAB1987980BF0B08E
-:1055E000B8A212FD6C3270B9C0A49E2E8F42FF0C7F
-:1055F00090736630F9C0FE8433FE817683E12D62BC
-:10560000CB2B9A37C9ABA543CBAB8DBC7F8BFD872A
-:10561000F266DCC078D47ECC2AC583C7D119DFF707
-:10562000DB74E987257FD771C6C2D200EA2791656E
-:10563000A296C6FAD0998B7EA8516B64E8C2EFE5BA
-:105640001D0D4C7C0C8B7726F76AB8DF38292C713E
-:10565000C1FB2B91FB9926DC715410D0EF6B309578
-:105660007E1A96EBA665A3D36D367DF6976B560A28
-:10567000491A2FB16812CAB55A91ECDE7F59363DEE
-:10568000D7DDFE037B9C81F5075D9E8565BEFEF23E
-:1056900032D10C4CFDCBD75FFE88EB9FBF51F1ECB4
-:1056A000A71F755D64B43D0A865FFFBF761C67DD8A
-:1056B000CEE60F2E1F27DC511D40F9775F6268B9D7
-:1056C00072F6BA2DA5751BB50CCC7416B9129004E0
-:1056D000CFBEEA3C554881C1D6593A2A917C9346BF
-:1056E000CF5ABE03061F578A2919F69BDD9F65EE28
-:1056F0002B61EBFF4970FE7A649443B52887502EE6
-:1057000095FB5E77FB4718C607CA0CF76F7F71DF02
-:105710007E9447169347E83FCDFC5E8B65173D5C52
-:105720002AF1FD77EF777E79AEC0C6396CF8753F08
-:105730007B7550E87983FCBE9512EDC7089F3A0B44
-:10574000DB032927874DC9AC66F57BCA05DA47FD1F
-:10575000F0D2B5FF4CED4314EFE899F7DA972F62DA
-:10576000ED3F79B10F39876302DBC7D93F51AF39BC
-:10577000DDFBE58B58FD8317E70FA96FD5E27C5D54
-:105780007472C5B3DEF20AA43784FF3FDEAC7D90AD
-:105790008D771872127E7C5670F80E237C48F7BD08
-:1057A000BF7E03F5C243A640FEA8C3153F8FA13DAF
-:1057B0005E690AA42F2E9E27A4FD59E6B978DE2D36
-:1057C0001327B0FE1246480BB0EF072BDFD97A1132
-:1057D00083F78AEF4B77E3F3E41EA920593638BCF0
-:1057E000CEFB2B4CEFFB7EBD189216E21D341E97AC
-:1057F000F0C58CB89B5EFBF518396166F3B7AD91C7
-:10580000B8FF51D00CD2EFE4B002388FC1EADF38D4
-:1058100008FDE6405F97847038FAF7E92B75B73CCE
-:1058200074E050E44412C791340576A29E917B95B2
-:10583000EE9E7FBDC4E34242DC2478148DC3A3C82E
-:105840008699CDDF5467C3E3F403D061B7EF83DEFD
-:10585000F0007C2D81C472F45B58B9DC7FD81CF158
-:10586000FA0377DBFD3CE6F4E783AC71158046EA8A
-:10587000BF6A54858AFD3755703D490783FCE3CDE7
-:10588000CC6E8421F4BAADB6BCD88CF10D3FC639CC
-:10589000343BCE11E7FA53F819F2939D2A13C9AE9F
-:1058A00019AC9F88E1D54742A55E3BC6D15F027A1D
-:1058B0005E861FC8EBF7F18D924547EF437A1D0EC8
-:1058C000FE7E3DCFAED726A7542D2B9ED243EA7342
-:1058D0007F3FFCF1F6215FA7960DAEBF15DE1CBA27
-:1058E000CAEC5FC95752698ADB25E21E7DC09693D8
-:1058F0004ABE9AC27D01D4C1BE0779FB30FB8EF14E
-:105900008C7042477F8A043C2EA4221FB8F0F38E8D
-:10591000DDEE1A59B4F5F914C541053D457E3BB598
-:1059200090F18F70763BE7D96BB76FFBD3ADAF10BB
-:105930007F14A8C41F82CEF827CB388D92F996C465
-:105940009EEB24F36D7CFAFE2C25B3F1C97FD9724E
-:1059500045AD4DE86A31C515C91EC9842320F37EC3
-:105960006F74E0B75214A71C29FC1F8C107E671CB3
-:1059700006BF2C1710FC3E7C0E06BF64C393077A4B
-:10598000838C724DE7F2156089EED64B6E90B9BCF0
-:10599000C8B3E513C02D71B7BD759DDDCF48E79342
-:1059A000278F6C3ECEB86C3E1364BE1E13E521D625
-:1059B00063BC0DC70D32DFEFD4EA841E67EB923B68
-:1059C000085DCDB3E148C9A2AD57DCF291E8EA82A7
-:1059D00011CE63DEC0BACCB6D7A562A879CCB2E747
-:1059E000D121C19CD7512F3EC7F1F72CF5ACCB6D1F
-:1059F000367E3AFCCEBA6CF0ACCBCDF6BC463A9FC4
-:105A000085767FC3CDE7B681755962CF67E950F3DC
-:105A100071D5BFDAAEBFDCAE4F76C76D726923DADF
-:105A2000198D5262855C30301EABF71977BD779ABD
-:105A30004E35D8F5AEC7F7420DDFFF58BD95EE7A6B
-:105A400060451BD13FD082B602B3634A9AE756D96C
-:105A5000ED5651BBDAFEFE6FB2F983DA059A854640
-:105A60002B4CF5D662BD86057F76EAADF3C27B810D
-:105A700003EF0682B7BA1F8E5BDDF5E6C9E3A8BF68
-:105A8000B3E20E23F407F962C9768CF3E741A4036D
-:105A9000F33C5AE5D42398076059323C86F9047EDA
-:105AA00043401F5BB422F56F582FD762F635AE5BCB
-:105AB00055EA292C5B22249ACA299F80F205EA64C0
-:105AC00055F31B987F61C07656D662721AEDF316B5
-:105AD0002169E1BEF83329F96599E4ABB6A201FB6F
-:105AE000CFD7B99E0EBDB46F3970DD13BA96F21FD1
-:105AF00072195CE88F6AC980EBFED0846EDC6FEFB0
-:105B00002D50484F66065629CA97DBA5A081FD7522
-:105B1000177C81E0DDD6C0F31BB67DF20B04EF7D70
-:105B20000250DCF63E1FCF6FB8C7A76A8D1AF61772
-:105B30001DF339CA87C8D1FCE5361C08DF278A095E
-:105B4000BE7CD02A6F10487C75A37DDB52A190BE2D
-:105B5000BC2D36BD92FAAB50494FBD2F31BD81F4FB
-:105B60008E8A20F9E8F3C306D9ADD1D90A58588EE8
-:105B7000190DA867466605310706F20B01930B2045
-:105B80003219D258F6414747097B46DB995D924F5F
-:105B90007613DC80766F05C33BDA11967904ED92BB
-:105BA00030D87FD24113E7ED1B2701FA3D9CF58DDC
-:105BB00076F4B71FD2EE8AA64758AF6B64F522ED94
-:105BC000CCEE9F31827A1D23AC971E61BD2E5E6F95
-:105BD000587F87C1ED3D95FD87765B20D36E0E7BA8
-:105BE000ED615FC6F7CC785CE633331E7242F6C6D1
-:105BF00043866BEFC441869B2F3A25FAE19486AF2A
-:105C0000EFE89B837D57C65E153759FB9631D7C4A5
-:105C100049AE8D59C19FE3EDF7E397DBE56BECF2FD
-:105C20008AE56616F93EDAC7E57029FA4386F23B43
-:105C300000D71FDF60B09F1130796968FF49A6DE89
-:105C40009B29EF54D9AA427EDD96E07E4D3F322358
-:105C5000F26121901FD607A98E1294136046178E09
-:105C60001AE01F9FF98289FC7C688C044205AD8F85
-:105C700041FEF40C3AC9A40B7F863FE7AFA5930B16
-:105C80007DDE78ECDF8A4E94766944FCA3748CB098
-:105C90005E7A84F5BA4656CFDF2E8CAC5EC708EB31
-:105CA000A54758AF8BD76B9DA3F0FD1CBEDB689654
-:105CB00030B8E7AA9E72EBDCA0F7FB45614FB96DE7
-:105CC000A642FBBF53F6CF523DE53626E73DDF67E0
-:105CD00087A9BCA9A5AB8A6D6523E693FFFC0BF9E8
-:105CE000A4541DC62F5D2166D86D197CA5EA016CF0
-:105CF0009F2FEB80F953F931BE4FB1A799CE82DFC8
-:105D0000476CFEDF29F3FCCD6DB21E40FBF11F7D19
-:105D10009E0D3E0EAF33DFE1E075E4EF9B92AD6F79
-:105D20000D96F751CDF3326508525E6649B5596557
-:105D300032B924BFC8E36099FD5EAB249FF6B9EC8D
-:105D400061594BF2F89EDDDFA20299F41299C93530
-:105D5000D47B1448D414511C51247F9F1C1E66DF31
-:105D60002874C9ADE221E0B6F358E9930E50F93B2F
-:105D70003E6ED00092AF11E825633A07B59E73508E
-:105D80004FD305A0F686C0FDE7F334DCF76281BF90
-:105D900075BF2BA85FC1BC07CE843E42BF722FF9EE
-:105DA0003BFFE6FD0E036F00F37B2FA01042CC9D5E
-:105DB000DFEB8BA7E8259C3E73469A05BC09FD25C1
-:105DC00029BE2E8B06F943616C94ECB296D806D5A9
-:105DD000BDAE7FF4157BFC268AD67A8B1065CFC2C8
-:105DE0003566EF10747E068331E81F29BCC1EC1DB7
-:105DF000623FED8F6762BC3E0B1FB42AC934EAEFE5
-:105E0000D68430B7E7E514F919DB84BCE99BCB5D98
-:105E1000F45BA874215C9172D3427BAF2D5F345048
-:105E20004F95616B8F3095B5936A8D64163D62A076
-:105E3000BD7CC23D9F98E2D5A79A86A1F79661F4F2
-:105E40001E9F6224B3F943272BDCAEF505B37FBF59
-:105E500043AC2A51669E8D37A6E673FB3617DA856A
-:105E60000B39F950BE43E10BAF201E5A0A2E8D0F9D
-:105E7000355FD0BC7997378AE634656838666683C3
-:105E800063A4F9205AB54174D8AF2FC5385DA39EDD
-:105E9000248CC27C0FFE7777F9CE2ECC03F15DCF38
-:105EA000E3B292B90BD04FEDE84D92193C2ED27A65
-:105EB000CEE3FA5329D7874CF61FCE233A6F68BD3D
-:105EC0005ACA282F51BCFA5053FD1EC0F8BC03BF5C
-:105ED000E3C7CB9CD75CB1EAEAECF818993D7C1F8C
-:105EE000A317988CF1281591021DF51A95BF5C1F18
-:105EF000A7F2D67A9D9ECDF5A5F4DC824DE7209FD2
-:105F0000A7DA8B18DEDAE38FC63FC7AADC87B28335
-:105F1000F6FD6B17A09EBCB9BFCCCC4006F7660C53
-:105F200078333DE256E58A0568BF6F0E80ED57581D
-:105F3000B0C0F494AF6AAAC4B2ED67D8DC7A1DD5BC
-:105F4000BF6F3CD8E7204CF553AE7DEF11C547FC41
-:105F50008D7B0B6F6F36617F01D92EC32D0BBC6516
-:105F600030119E80CACBFB940DD43F890036DE4FA2
-:105F7000955BF97893B81F1FCA960E8347EED70733
-:105F800045E7F2B32C8FF25914C340F72BDC976B23
-:105F9000C33DD27EE424DFEF8E66DF2F07F86698DC
-:105FA0007DCD8663B8F567E8B0FD1049B070DC5F61
-:105FB000F038E2DF7BDCFB7C1F0D2F4A459F85E735
-:105FC00047E629C9EF21BD47CCCEAE22568ED67604
-:105FD00059C4BE231CF75E45B3E79D24FE77F0EC61
-:105FE000E81DFFE5F3AEA32F66521E5220CCF96FD9
-:105FF000A4F0F6A27E3573A01F78A26ACC50FA5A9C
-:1060000041424425AC5F5EE4D704D118EB2FE79AF8
-:10601000799E724EC5584FFD8851ECF9EED3CEF7FC
-:106020007CFF4BD7E91719F3F889AD373AE51F67BD
-:10603000CE7384FD3AE5EEDE0562295B87976B251A
-:10604000D2EF5EAE7DEDBE19584E4814BF3DB5BCD3
-:10605000C9878C7414CCC84CF4872525DB9F6E8EC1
-:10606000477CFE02FFC9C67B09F73D269F0EDBE792
-:106070007F989C188FE79F0E5F3C7B3CAEEB611FC7
-:10608000E76FB03A483EFDDC071E79F0735BFE18FF
-:106090006DDB9BD00F7954E065A96DFB028BE28329
-:1060A0005B5B2F637ACB951C85B0B456C86A0F44EE
-:1060B000FC0AE1E3432119F1B3799AD57A4B0CF349
-:1060C000DF74207DD50F09D2CBEAC0AA1451DF615D
-:1060D000F447716EB9AF309BDEF1737B3FF7C39528
-:1060E000A4EF2FADCDF5A131EFAF99E6433FEA958F
-:1060F00035953EB0F565CD059F9810E8FCD4B25AB1
-:10610000FF4EC4EB32D9F4658B6B5D99F07BF6A939
-:10611000690C8708FF51FBDC03405FA13BDE34CDF7
-:10612000CFED9D78C9D0F68203B7535E523BED792F
-:10613000C403C3369D4701B5AFF0DA88BBDF9013C7
-:10614000178E60BF2F2FFF2CDF9F195DA05FF1C559
-:10615000E39FF7515C7659BE87FF96564B1EF813A6
-:10616000F3429EF255B557E60CA97F24FD19F2CCF7
-:10617000B2CF618A2487371F13483EE44CE84B6353
-:106180009E26BC2C01D7FF1CFFEB5CF2BF46C7F577
-:10619000E9A82FC06F43DA632EF9D96CD3E560E329
-:1061A0003FE7E77AAD9C5743F1EDF78F0B3ACE57B7
-:1061B000C8AB9B8CF39515B311C76D2E12D318F78E
-:1061C000BEBD789B8AEBBDA9E4A3E981BE188FF719
-:1061D000EB96361DD97FB07669939F23C87CBFC6E6
-:1061E000CFE32D2DD652AD049771BF5689F30F140E
-:1061F00042D673A68CFED7F8D16F1FB380C7D713D2
-:10620000A45797A82B290F571E3B74BC36136FB2A7
-:106210001D07CCACF7A44D8F25153BA9DFF7CF1B8D
-:10622000BA5F072F1F1822F4D8FA04D65781CD87FA
-:10623000E17F4B29CFC36D2E7B86F02C9995A4CF9F
-:10624000FAB49489F5B694AD24BA6C6175F2D9D0DC
-:10625000B9D59D744E73CB9F787CE2C9B6FD4DA82D
-:106260003F6CE9BE0930AF32184F03CA8F2D536E11
-:1062700054110F5B7600F4201DCB9DE4940BD9FEE6
-:10628000F0900669664941A8CC04940B791A3F53F3
-:10629000B9375E05B86E5BCAC140D6CC4FA71A307D
-:1062A000F4B325CEE3DFC152B3A608E11E23921852
-:1062B000D021D98EE5E65A99E6D1AA717CA0DD7588
-:1062C000C6C9EFC23C98126E7795A07F9FF5AF7C50
-:1062D00089CF5BDF5E427EA22DB92F9BA8EF5A9F2C
-:1062E00004631270BD96F40499D111F65FA7655D41
-:1062F000F7AD62F29B7E57FC5ED67401E934133F22
-:10630000EFFBE0729C77F334117666D137F6F879BB
-:10631000BC2E6D2CBDA238CB38CFF9754F9E80FEB8
-:106320008142700F567FA09E4C7E7D343C16B17921
-:1063300014D4707F29649C638D4192ECDBD160356D
-:10634000203F3AE757C755277E95644F29B28CF214
-:10635000E9063BCFEAE479AEACB00532E857FF86F8
-:10636000CDF7A6033E40BC5D72FA9117305FCA5765
-:10637000E1D728BF0A3A5EC0FCCD1B983A86E59B60
-:106380008E4D5130FFE7E5B112E6C620FF44910E75
-:10639000DF0691F2CFDE8623D1192E3A7FCBDE774E
-:1063A00050B2A21C69CAE5F392C3AD3D5214D75D49
-:1063B000B67A9DFC3D5298785E3B84D97B95B28F2E
-:1063C0001A48FEB5F37C21273FF2731DDEFCA1CFF6
-:1063D0006FF7966F84A5A3906F6E640A5D9AF57B44
-:1063E000933BEF8B8D7FD4CFF583CF43AA15F79FD7
-:1063F000363B3F66EDF7A62848D737CDD08AF01C4C
-:1064000086338F3FF8B91D7A82F1A9EEE2FFD5B14C
-:1064100034E52767CEEFEDDD0BBA92ACFC9A2EA7E0
-:10642000B89DED9D679BAF6731E67B5977FB6CBDEF
-:10643000C19BE7B87A57A589F9620C7B7ABEB73D54
-:10644000C1FFD976EF7C87C347E6FC1D7D70B0F9AC
-:1064500028BB84ACF97E21D59B2FD5A4F278A3D993
-:10646000244360FED9E7A3ADAA149D6FB61AFD5A66
-:10647000538CE29314FFAB638483F1BD7255A77E06
-:10648000DE0F4C48039D4348CD46FDE8AFED778EC7
-:10649000CAF9F06FDDEFFC41E05DABF62AC89FEB77
-:1064A000E58E1AA178E07C40C06799E318BEFD7BB9
-:1064B00096748D034FBDF611D63B8047A04750AF71
-:1064C000461CA2BF93F6BEF5EF4FFCAB82FBF7DB99
-:1064D0008F1F5F8C72EEE61F4AA0B27A279F88401A
-:1064E00017ED3B6905E5F2EADD12AD3FC85DB3AEDD
-:1064F000F4E4DB37D1FC6F7E2A42FBC3EA67FCE998
-:106500005AD67EF5775F9B0A8C6F4F36F6BD300EFC
-:10651000F1F7B8C0F318ACDEA957B2F7AB65B82EE7
-:106520005B1EC2F52AE7ABB7BE1F5A8EFBBBB0ABF2
-:10653000FB5AEAB7F36A9FDF257F97ABDC9E66F5CF
-:106540004CFC6E7D43484F12387CD9F2F2DEFA06DD
-:10655000F7A3ACDEE34B639EE2EA5D3B9424ABB76A
-:106560007ED73B44DF0B9E7A328A7858BFC77B1EAA
-:10657000E1E6A7FED43AB79CCE3BF5D5A2FC934EFC
-:1065800053F994A9F6F13C78EE8F59471CCBEA7D7C
-:10659000FBCD4B7FC3BE9F884B106022E544CF7F6D
-:1065A0002A3FC472329C62A28CF5EF7BD5CD87EB7B
-:1065B00077BD46E78E349129B017E179888CEF19C1
-:1065C000F5999EABA03C5CDFB9E91D9497EB77BFD2
-:1065D000FD6BA4BBF520BFEAE6E713F88F3167C770
-:1065E000B336A95E3FDD2938388B1C00BBF2B3DA25
-:1065F0008B4E3CCBE1EF9B9F3CF530EA116F3DF3B6
-:106600005F0FE3FD0C6BFEFC3F0F635E2BFC28A0CD
-:10661000A1DC5AFFF82FA2E0C2FFA3B67C38F98DA7
-:106620007FFBFA030C0F277FE527AC9D7CEECD099D
-:10663000784FC7C9A7FF7714EA1F1B9F5B381AE979
-:106640006CE377168C1EEA1C28D26DDAEF5EDF341D
-:10665000BFDF608F809B20C0B3F633635DE0609F37
-:10666000827AEF7B02F46DCE65EF3BFFA4A0FEF2D1
-:1066700082097D88A77DBB5F7BE10E567E9BAD9333
-:106680003FCB3AB1F98F13697F63ECC39EEB765F22
-:1066900079C5C5E5F8F419D8FD7AE8A37DE3ACF532
-:1066A0003DCAD6B77C607D33BF9F82D30AE27FFDAF
-:1066B000136C3DA7E2BAB2F59C7AF67ABE8DFF98CC
-:1066C00073F67AEE53BDFEB853B0E69107F0E3EEF1
-:1066D000FCACF6ADB39E6BBFF3A921F572473E0C3F
-:1066E00087673ADFCBE0FA8A6AFE5C45BE7DE69BAF
-:1066F0005F7F20C6D7B99621E6E493A726E0618D97
-:10670000DFF9FAAE453CF43DE7D7508F5AFDDC2F58
-:1067100089EF4E7EE7253AD7C3FEA202DBEF4E4259
-:10672000FFDF1160E575022FACD5FB2EFD35EB7751
-:106730002DEBC23268FD2EFD7539AE9FDA47EB9125
-:106740005E52A3A3FC4D17D0BCD7A5397FAC4B77C5
-:106750002F437F7626DE2301279F70605DD15FBACD
-:106760006EF7F14B91FE065B4F67FE1ACE7F36FB4C
-:10677000FEA8977F07E5577B7D4FEE785F41FDAA26
-:10678000EB878A26323BFFA4AF4F198BFBCDD39208
-:1067900086E78D33D77D00FF8D59CF1D673E33E9E6
-:1067A000C31FC81EBF76F0341CBF0F3FBF8F86BF0C
-:1067B00053F63E9C89C7B74E67DF0FCE09707B6EDC
-:1067C0001D74D4A08A99B99FF920658D2B1A80B7C2
-:1067D000B5532239FFD62EEEA7C99417EB06B1CFD9
-:1067E000A639E3ECE99E8A72EDADBDDFB7E992D33D
-:1067F000FDBA278E2B96BD3FA45DF85D3F88BFFB99
-:1068000022BBBFF5CF66EF6FFD13EF64EDEF846C35
-:106810005E8DF09FE8F1515ED2894E29AB9D3B29F8
-:10682000E0F3E85DAD9159AFE4B076523448795762
-:106830004D8DE62FD14F6A1DF1D97E00E377986F19
-:10684000D51409D239F7A6E88D745F92D35F730629
-:106850009EE47882EC27399628E731B0B4C78EF1F0
-:10686000318270C30DB255887AFFA1A23765ECF76B
-:1068700030EA912EBBFEB00C2DF9E5782E42301A8D
-:10688000208B7F23A3FFC43C0974B79FB06B8CF8A7
-:1068900007D6DE7F544A236AEB20D545E7020AA1DA
-:1068A000F3B12CFD3D54AF93FD5C94B88EFC3FFEDC
-:1068B00054CA447DAD70A3562CEA838F3B3EE58DD0
-:1068C0005F8F6594FF071CE7808FF441D8F5F8E3EC
-:1068D0008F8FE25B0AEAE52FE093C9BF4B56E9854B
-:1068E000587EC89E37E3013AC738DE4AC828E78495
-:1068F000D81219F58B85A984BCD2B59E0B63C258FA
-:10690000DC4FD383DC03F5BD00DF3F1B1AAEA23C96
-:10691000F607BF24125D3F18B8AC10F96C7FEEEC9F
-:1069200030FAD7BAD7CE3A3899C1392E2C019A9C71
-:10693000FBC2439FDB7CD8F62FECB4EF1F7AD4CE9A
-:106940002FFFBA8DB75DF5A5F47CBCDEA0EF4FD468
-:106950005750B9B3BE869ECFD427E87DF48E60121F
-:10696000E97377FD727A3F0EDE1170FDBF5B9FA465
-:10697000F2A3815C827FE29D2026D9FB85888FF07F
-:10698000C0BC1D78D2B6DDFDBDC08F9B912FFAF142
-:106990009881EF4BA04750D17F1513745CF7BA80F4
-:1069A000CEF35C33F03BC1DF27605CAEEE4E9E0F52
-:1069B000F1B0E03DEF70BF2DFFBF6DF3E93BD1E4D7
-:1069C0009301D6CFBB35CB4A491F02AD0CE9E66136
-:1069D0002171D828223C7BCE9DACCE4B7E3BE0F291
-:1069E0000F4F68E776FDF6802DDF368288F4363E5D
-:1069F000053AD29B33EFBD957A21CAC5BD8240EBE3
-:106A00008DF456EAA2B77EFA0DD879C9F1ECFBF8FD
-:106A100000FD72FE8FCF2DBDA71AF1B241243F4871
-:106A2000137E72B5FBD0A62366B78816D2F32A91DF
-:106A3000FCB9138F1D172630F874ED9B01BCB72BE2
-:106A40003E016C7F536700E9EBC155DCBFF8B563CD
-:106A5000FC1CD3A98DC54B26B3FA8B197E30189533
-:106A6000B7A8C4E3B774CE2F7C4D4DE46843F8B7A4
-:106A700032F3DEEE9F78D707396C9C71C7423A9E9D
-:106A800087B967E28FBA15561EDB2B903F696C38C9
-:106A90003519D7B3F2FF7F634CAF6B1D1E589B9A1D
-:106AA000887A63EBC46F09C807634FFF58C07D64E1
-:106AB000A2967C33C0D6619C6C9F139653B3D12EA3
-:106AC000B8262FF17B5CB74461FAD3484FA76A36EA
-:106AD000FE3BF6EFC421EBEAF4DCC92EF990799E77
-:106AE000E2A1D4D0FE4C67FE0FE1FC87A8E7CCDF23
-:106AF00059BF5335B135281733F199D96FDEA265E7
-:106B0000438EFF907D8F189BBF3FE8A2CFC254AF4A
-:106B10008CED9CF683C55D33E7DBEF271A619CB6ED
-:106B2000D307F948174FFF71C2B70F03924E424285
-:106B3000FFD4DE40724C7026DE1F97A232938E94F3
-:106B4000CF7E412EE7DF07467D7D0CF19D9C2EA276
-:106B5000BC8F118ED702894425EE73866864DB07EB
-:106B6000A60439DDCF8314F947C5D09D43C7F90B7F
-:106B7000BD71FEAD409300AB4BB5E31F206BE80F3A
-:106B80003B00D3D10F991FE4FC5E2973FB72C60151
-:106B90007D87C4FD56D292880B7FB6DFCEC7BB6619
-:106BA00070DF099A8EE7BEA6750B2E7E7D3F949C02
-:106BB0008FEBA6C4B93FD2174BD279CB855258245C
-:106BC0007F6E0797FF759050CFE37119C079EB1076
-:106BD0001771BF7F68233FDFAE6B2182FBA1984E08
-:106BE000E53A5B4FF9B14D47DFB7E5FEF76C7AF94F
-:106BF0000ECA7DF62CE935F7E730B8BE6DCBFFA79E
-:106C00006DF9FF942DFF671EED856F94933C363030
-:106C1000EFF9CBDBE28D38CD27EB4DAAB7B37E156C
-:106C20003DF7E58E16F7B07A8F6E1477223F3FAAB4
-:106C30008DBE1CEFBB4A9BA221B0C60F59DB164488
-:106C400019FC3B5481E2670FD7A7A8DD0E556F549E
-:106C5000319EC2AC650BC9A0AE87C21E95BFEBD3F7
-:106C60006A58BDAF75E45D8E71B87B6B646AE7F0FE
-:106C7000913E73033687689E3F886C9557D0A59EDA
-:106C80008376FA4691FAF94AE033EA02F61C3FFEAF
-:106C9000887A998E8B71DC4CB1EF0B1892711E15AE
-:106CA000BDBD16964B5E0F53BEF6AC577AE16956E2
-:106CB0002E5A15A1F278CBCB175376F75A1D0C8EAE
-:106CC000F16FF1EFD579BFB73A59FD9C0D51EAAF9D
-:106CD000EAF55E01E9D957EE3D7FB5DDF7AB7D11F1
-:106CE000367EEC604240BCED15B4059812627D9A88
-:106CF0009FBF197D00AAF07D3CBA88D6615BB08841
-:106D0000E8E76BCD47E237219E36C69AD1CCD9B79A
-:106D100071039D4FF06FDCC8F5A014F77F8FBF6D36
-:106D2000BFF079977C286C96B3FAEDB605FD3C4E22
-:106D3000B271596232076F7F18F5BD12EEAF2C6A3F
-:106D4000A9F6E43539F1910F85E4B620D94D3C4ED2
-:106D5000226B297A7FB184BA227B7DBBC8F5A4441B
-:106D60004FC0ED87D16FE3F7B365C2B13328131C71
-:106D7000CD56F52A941777CF54E400C231D9BE9F7F
-:106D8000C58E43F6EF63427267D0E3B7E7708D6755
-:106D9000A80C21DC5D3D9FEE64FD7C9072F63133E2
-:106DA000487AD23D22F1C7D6727E0E709FF16E17DF
-:106DB000DE73E1F0538B2112FF6E9385B4C0FAD9D4
-:106DC000565E9C7B1ED24F0C776F9AAF8A782E91BD
-:106DD0007D3C8703CCBDE817F7A35F9CAD77C9B1B5
-:106DE000D07191FC7FDEFCEF22CBBBFE629DF7DC15
-:106DF000DD78A6F4B8F39581114D3F9DD1FE5ABDC3
-:106E0000F73F901F968788CEC032A395A3307DD1DF
-:106E1000FE936AE9FC7349C63983076CFBFD61FB8D
-:106E20001C219CBE05506E3D609FBF7E608D18D4B6
-:106E3000195E9EB78ED0BE39BEAEAB9202339ADFDA
-:106E4000935FEDBF536BC4FDB528E5CD13AACCC845
-:106E50000B2AF92BF3AC8F05BD76EADE134103EF65
-:106E6000C34B1F950CD467BF7CC70C927FD66AAE0C
-:106E7000B7A457E53D80E75DF20530F0BDD3AF63C1
-:106E8000BFBE1BCC23BE49CF61DF73985C89742ED3
-:106E90005A85EB05395A630CCF43DF0EDFC2FE572C
-:106EA000F1F5AF2C04BA5FA7300674CE993D379F39
-:106EB0008BFCBF51C498389C41398F725CED7911BD
-:106EC000DFE75E2ED2FD3945CDD67938CFBD73C709
-:106ED0008E45FAD81AE6E75E9A841468086F01E7CF
-:106EE000871D912ECA07BDBB468446A428864B0346
-:106EF000FB5919DC49792C08EF4CA23BD2BB304638
-:106F000081FC685D1FE4FBCE69EB3CF42B4743BD7D
-:106F10009DFB583FE136C5D8C9FAD951E9BDA76EE6
-:106F20005288EF778190E0C4F70321F634B702E589
-:106F30002DB2B9107F33BEB280F6058DEC2A27BE84
-:106F40001FDDBB482C9AC29FC52EFEDD69CBD9B48C
-:106F50009DB7F0B0BD7F38FAC603B6DDB0D5DE37D9
-:106F60008ACC2B1A15A4DB55300DF154B2A6535818
-:106F700099CDBE6FF7CAD54C7E9998C92F29EF39A4
-:106F8000D571AB8A3DDF23C6F99EEF148AC17567C0
-:106F9000FB37E2B92D5026A1DE370312A65BAE0CFB
-:106FA000B6FFE707CDA9A18FA0FF44438914EA9F4C
-:106FB00099FAF745F6BA5C1B48CCC1F588CE5D4E10
-:106FC000793C6B03898BA87F392DA03C9D87ED62AE
-:106FD00059E1A5E4AF11C05BFD51E005D9A0F35C18
-:106FE000B74BCE7DB6DEF35C90717F6DE6FDB4F3FA
-:106FF000FF7827DD4FDB2230450FCB39F6FDB47E1D
-:107000007E3F6D4B84DB5D2D761ED53A1B0FD785F9
-:10701000F87DAF6B6C3A9D1FCA7EFF91E3F74AA1E2
-:107020006CC07AA3B3DF3B861A15F6377F5CF6EFA8
-:10703000A9108F3BCE9F38F4381B701CD6CFACA064
-:10704000B936E4F2AFCC0899EBDDE55B43767E918F
-:107050009C20BDD294F97E581434378666BAF06B02
-:107060003FF31695D379BE53F6793ED66EBB407882
-:1070700095B491E0DDD1FF5B04FD1E9283BF607A81
-:107080005F96F5783F18B5C49C817894A31FED0AEC
-:10709000717B92D1DB263E8F34E5418741BF07EFFC
-:1070A000811887F770EBE85738F6F0BFA2BCBDB87F
-:1070B000A706F5A7B53F90E87EBBB3F0B586D19D96
-:1070C0002B1FC5793FF6837164074F9492F7875C55
-:1070D000F6C7D8557D0AD23BC25FCDE1E7F9D3426E
-:1070E000FA3C6E0F00C5715A6E8A7BF20933ED913E
-:1070F0003CBCE780E48A427A5D265C8E3DE19433B5
-:10710000CF231CB2E908FFF451784F38706556362A
-:1071100025E4AF9990A4E76CD0E9C9EC964E9C07A2
-:10712000E33F1DE16C0C4DB808E7F177C4DB8F42FB
-:1071300033FFF1F0E6D07151F2927E3ACE76FFF550
-:10714000FDA128C9DBBA6311D2FBA37BBF48742D14
-:1071500031BA0EC406F265EAC0CEA30F4327EABDDA
-:1071600045C97A3A177A8AD131F62B69FC1CAB0CE7
-:107170005A02E336528CF3874F2ED5440DE3B29674
-:107180001FF30EAC623050D6A23FD20D6F7938F9A2
-:10719000A61B8FB71FBB87E4EDB581E4095CCFDB8D
-:1071A0004B2C3F6A762E39FC965B0E0B10D691FF66
-:1071B000E69FE6FB65655297911E16304E47BC2F41
-:1071C0008424952F038B9E8B204DCF4FE09546A4B2
-:1071D000C7D9E716BAAE16DDE716FAF3B9CB9D7C30
-:1071E0000E1EA72AB0E9106C3BF5F9E54B1B16B251
-:1071F000F1D9E29B188FFAEA729ECFE39F2DD3F963
-:10720000D582DEEB6B314E04CBB85EE6E441E4D5CB
-:107210007AF5B4B3EEB73AF6FB63D82EF39C9CA391
-:10722000AF65EE5BCE33535FCB0B673F3F39D8BEC4
-:10723000931957A8C37F72FBD5B6AB1339EE7BE326
-:10724000339F87EAFB9AF7BBF2CC0FE3FD4659F771
-:10725000011EEF8DEEFD7DEDB272BA5FCEC094C916
-:107260009EFAAEF9AF4F1AB08313F3729F477F7443
-:10727000A23A77BAC4F0BE38FE5EF3FE7C80256683
-:10728000F7FCD75DF3ECD118B459F484FEF14CDF70
-:1072900087EEFDF76D85CB97167BBC881D1F6B13A2
-:1072A0002D3FF1ABED7FFB4321B7D31DFB3EDB7CD4
-:1072B0009B095FBD61A487C1E6FBD930DF4F472D35
-:1072C00037E8BEFC26FBBEFCA6F14EFE96A1A13E11
-:1072D00079633897DF57102EA1F86A53F71CF2270D
-:1072E000171CF4913F7DD4B2A460B9F6C57BEBB90D
-:1072F000FFF52B4CBFC37C902D4CAFC3F2DECA59B7
-:107300002ADA0BB746A653BC7673BDE1C917719E46
-:10731000781F5DD2E5DF6B4A546918EF6DAE9DAE04
-:10732000A2DD217DB29CCAF279D33BAA183F7F66C9
-:10733000EBD44B0B302E51C6EF23BB8E951B4A98D6
-:107340001D1DE6FBEC21E3F530E2A92AAC3BF4433A
-:10735000EBE85B96347D2817E25A15E6CA38EFC190
-:10736000A62FF69EF4EBB795E44D6136FF43F6BDCC
-:10737000586D4AAA7443199E8B670207FDC42AF709
-:1073800013221D34CF18807B838DDFB9F6B84C20D3
-:10739000894FBBD64F89F3F56B136155B6F5B933F9
-:1073A000CCF59B66CDD486A4234DFED0737F68793F
-:1073B0008CE7E7C7181DB9F8F96C7AE7FC541E4E44
-:1073C00034870B502E42698AE61F26F943EDA481CB
-:1073D0007B2CE361B31DEBFD2CD7CE872EE479D057
-:1073E000EC7D6B0E96E514C977471F6C93B93E3759
-:1073F000527D306FD146D207DF65AC45F6D92737CD
-:1074000092DCDEE853E9FEBFBDF3648A6745CF81B5
-:10741000EBDC768B14B1EFFF8F70BF3CFE4E427AEF
-:1074200032D77BF09C47340474CEA56F3CCF2F6DD0
-:10743000831D35E7107C9334F77E56399EFB19EE99
-:10744000AE0AAE72FB1BE6E4F27C91FDB995BF4734
-:107450003A280BA7AB90352FD0A017F369A08A9FCD
-:107460001F130AF9391B1F182AE7D76A0DEF0D15EC
-:107470002049E7CF065D3FF0DE2FFAB89C6E0C2264
-:10748000DE62DCAF13D92E50D29ED46976E1D99D4D
-:10749000C6DCA53F0813BE1306F277F7AC20D97BF4
-:1074A000EF752B647FBE7713FC06FD49EFF972C0C0
-:1074B000624BF52351FCCD536CBE7D8C597762FE37
-:1074C00097C6BF4FDB2A90BFE9471F06C721BD1BE8
-:1074D0005110F1F72C16337D8227094208E3B3D10E
-:1074E00005D07509B6EF0E13FE7CF19FCE7F7D06A9
-:1074F000ED3F21B102CF6B890FE2FC9F89431EB69D
-:107500009FF1BF5512FAAF1C7DE81E2D7904E19D55
-:107510000DD6AA6ED6FE6E85F3D7DD794A1AE394AE
-:10752000D30B44D243C0174A4F62DF171F78BD1AEE
-:10753000F33B17574CC39A383EADF7442D790CE90D
-:10754000AF5A5B529DCBEA971FD549FE5E1ABF65C5
-:107550003F96671DE3659F9FEBF1A8C7B8CF072C47
-:10756000FE6002CDEBCD30D7679BE3668F290CC957
-:107570005719F7F27ACF173874C0B6751DF3D2E9F0
-:10758000DF3AD145D2270EF89FA0C2B0CF9F38F482
-:10759000600A1F851E7687F9BED086F966B1817CA8
-:1075A000B3365B7F1B69BE59263FE52D92691DDE10
-:1075B00065FA16DEE771369FDC42F77F66F29303C9
-:1075C000E7E6F2BC18CA61876FB4D977925CF65FC0
-:1075D000AFD07DA60E1F39FC332BA79F8FBE82F242
-:1075E0006259585FC853344C70F3C995C3F0D562E3
-:1075F000E8DB1F63E5C53258394C041D9AF3BB9292
-:10760000092E3EC9C4E7E27902BCEA9183BCECC210
-:10761000B7D67F0F70163B79B0753922F3730F0E12
-:107620009FE2EFB1E0F9B176D100DC8F1A73571AFF
-:1076300011364FB936770DF2C3162191427E88CCB0
-:107640007E2B7423C3FB7BA3981689FE437DE553F1
-:10765000C4EFAF84C82EBB7BD66A8A4BBD7753720A
-:1076600022EE2F9B18DE5FA5FD3C3D5AA45CDBDEBD
-:10767000D13C6F428FF36732CEDF83FD3D6D974D76
-:10768000BB5E2FD563EBEB919B07A29C0F0E44F9D9
-:107690003EB549E950911EFA8A54CD9DAF7C897D53
-:1076A000BFF0CD113BAE78BA49C7F8C4CD11DEEEBC
-:1076B000DEFA4ED25736D5EFA1677E6D1A303F2ED7
-:1076C000586AE9A857A87F5E20E03E0BE7F3783BB5
-:1076D000BE6F70E96B9FB2E5B68AF700B179AB8DEA
-:1076E00096EEBE77561585ACF703FD24CAFDBF6A3A
-:1076F00023D07775EFFFA3BC84FC1243F81C961BC4
-:107700003BE87763025DFC7DACC4146E70F51BAB87
-:10771000EDF4EC8FAAD82B933D54079A85C69DDCD7
-:107720005B8D7EB7F6A5C10ECC57CEA423FC7BD5CE
-:10773000450FEA9FAF24BD088E70BDB4BA5825FA34
-:107740006DA95376A05FEF0FB12ACA536FB2F196BD
-:10775000391F8CAB334D8FFC64969FC7D7ADC93CA6
-:10776000BE8E658CAFE313E3EBF8C4F83A7EC7F83E
-:107770003A96BF556F5219E3EC58C6383B9631BE66
-:107780008E658CABE3734FFD2A7AFEA03E45DF9FEA
-:10779000ADAFA3F225B6DC8452FE3B5FED5F544CE7
-:1077A000CC8BFAA1BD3EFBCCA5AB7E8E7E40881A69
-:1077B000B85F070E36BEF213BB4CF75FC78BF3D131
-:1077C0002F093111309ED01ADFC674CC81F905E43F
-:1077D0007B41A778BAB50AF31977460E5D2A33FDC7
-:1077E000A1247E4B551E2BEF8A1C6DC5FCD173F571
-:1077F00086E53B5C653D327DF5D3DA407962D90E92
-:1078000039C8BE3F79F7CBAD28070231AEF77D2FDF
-:10781000F2AB4B1B1849741533C506E558919246D7
-:107820003ABE01D76912CE83EB2D9F80A638E6EFD2
-:107830004DD495E9C87FAC7E17A7FB91D5FF2106F3
-:1078400061669EDD6EA87A62F988EAD1F9DBC1EA49
-:10785000E17761887E5AA049EB61B06FF1F1FDD507
-:107860002AE0FEDF761FE7FBF6007F4EC8E1F4F763
-:107870004EB4EAAE287BDE15E5EBDB1EE0F70EF436
-:107880004D11E9F778A04EF827ECE70B6341C3BC34
-:10789000C7E9538AF351FF3F62D3C3A48911BE6F76
-:1078A000FFB34AFBF665139F6CCE63E549FF6A1888
-:1078B000B80F6F012388F7B65A5B45CA23FA66F9F9
-:1078C00039794B58F50B667E270FF5DEE9B6DC49B2
-:1078D000DBF64943CB8D13D13E78EF252EF78EDBB7
-:1078E000E3ECF0F5A4683D6786E91C054007E9254F
-:1078F0000D7199F2BFC431FCA9F8B46BE85ECC16E7
-:1079000085EE6152FE345B257FEA077EFB1EE21E98
-:10791000D257944052CB65EF3B2C91FC0F4D5A301F
-:107920008DF7616D094FA7DF65B0CA648A876D293D
-:10793000E3719D50E42ABAEFEA2BDD01AADF12566B
-:10794000290F385DB6FB40550C9FA286FB7EDA5CA2
-:107950004AF7535A9AA8513E31FB177D5F13233FD4
-:107960000F9D2BC6EF6B781CC237FA20959B3EA566
-:1079700051FF60E7ED93EA25E2EF4424BABDF7CD6D
-:10798000F6FDF442F483ACE6E752A66A4BBB9F6374
-:10799000DF9B4D3551CCF8A1457B776F08CB2B8011
-:1079A000E2A4A129AF3786B0FE0D9AC1F3B0F83931
-:1079B00008B0EF376E2E5BD6FD1FD8FFF2104C32A9
-:1079C000B07EB58AFC0ACDF002DE475568EB33A1E4
-:1079D000DCE902EA632DB574ED2683CF7B7EA03906
-:1079E000EF7215E9465A9C47E3B480A9627DAB5615
-:1079F000A67DB130AC76A1DFA0D0F63B38F2203FB7
-:107A0000E53A47C0FE37768DEC396730FA066FB934
-:107A100020E37EDD0B6DFAC9C45BE63CF363CFE483
-:107A2000223CF96BE844C459F0DF1B9BBE04E735E8
-:107A300046DB2BEC28279346D3F17E714835B8F30B
-:107A400030FE5A78A79635F7203D4CD565D0195EA3
-:107A50002E84BE46EC7F8B4DFFED45DEFDF9886D33
-:107A6000D7303EFD7C7426C63344B05CFD63BCC396
-:107A700072C1734E7B9EA73CA963ACA7FEE4EDC523
-:107A80009EEFE7A5CFF77CBF60D7744F794AE75CDC
-:107A90004FFD0BF75479CAD3BA2EF7D49F7160A962
-:107AA000A73CB3E71A4FFDD9AFACF47C9FD3BBDA48
-:107AB000F3FDA2DF6DF0942FEEBBC353DFD1EB33A8
-:107AC000F7CDEBA37F993E8FBFFBE33E4F9C692F21
-:107AD0009C756FCE9F9B748CFF4194DF932BE3FECC
-:107AE000CECA1BBEC8ED2E75BEA1A3BCB9DAA6CB0B
-:107AF000D579E63A94AF955195F60939CCEBC9E1C1
-:107B00004B491F99B09DC9A919648FF57FC7387477
-:107B10007BBD35BFC4E5AF0A681D80F95F95D11AFA
-:107B2000BA2FD0692F6B26605EDCD5519DDF73C301
-:107B3000AC59BA074067ED5DF362F61F5D1DD1C712
-:107B4000EC43D4EBFBED3F3987E2BECCFE23FBD008
-:107B500008727B104E4BF4DDF88A40F7F333FB8E4E
-:107B6000ECC367C2CC3E9C86F658EF1694437D3F2B
-:107B700093298EC8FEC8FE2B67F6DFE65CB71FBCF4
-:107B8000B7089F69D0C6E2B35BE9124717913D7809
-:107B90001FD2F36736BEB40AFB9D52CEEFD56B1FE2
-:107BA000551B473DB9BDA893F8A4AF48E6FB909C90
-:107BB0002875FBF77E6CAF7748FD26D9A16C1D4870
-:107BC0002E3BEBB045E84DE3FD85D61783E4EF9EF1
-:107BD000F05BFF11E437B5581D87F97FC63EC5C479
-:107BE000F1EEB5F15CAC4DABC29F792C892FD98BEE
-:107BF000CF7375A68FB06769E93D7BF1F974949FE7
-:107C00005F3DDF78BA0A658C3A9FFBADE5A94ABAB9
-:107C100051407F3383238BDDD1EF9F886EE7F7FDE3
-:107C200094C86F20FDA1D67F864DA1324FA5B871B3
-:107C300000E942A027D153400ED1FE12C043A858FC
-:107C4000AE10D218EA42FD15F3412BF3B6131D38DE
-:107C50007A2DEABB496E1FFF18F11AABF5AE7F48CB
-:107C6000FD16E1A9D93EEFDC9EAB1FAC62E3B6176F
-:107C700014E7A1CF16FD294B5CF2679FBDEF3E9242
-:107C8000237AE4CF6CCC519839A017317ED82E9E40
-:107C900083F02628BE1E3828913D1FB8B3837E5F2F
-:107CA00035A0593A90FE6FE9D86F75F172F2FFFD79
-:107CB0004F6C3AE9C181BA1F65C55BA0570273C614
-:107CC000E0F88C9EFB00E903302AA8E33E5B170B2B
-:107CD0009A3BB2D8079F8D70FFD9A6098E3F3341DA
-:107CE000E75D5BD0DF16C6AD4D15314FE7D69F156A
-:107CF000EC74DF07716B01F74F0E367E80D999491E
-:107D0000177C9B58BF28C75B4E2FA9A1FB54719BC2
-:107D100029C7F3A0653BC84F6FDB4B9FB5F17A7362
-:107D200084E37182020B76A03CC963FA114369A512
-:107D3000ED5771FC2FF11C1ED7372C90B85FCEE7A2
-:107D4000EC5BE219BC8746075D99651FF127159822
-:107D5000EF6BECFFBAF15CE039EDAE7D0E703FF0F9
-:107D600096276FF796CF4B7BCB4C8B7E19F58065B2
-:107D700000DCAFB1CBFB3D0CA60FE328639DFBF30A
-:107D800013FC9CA0CA2040FA2EEB4C777F8DCD2FA0
-:107D9000E1DC7399715FFE94DD69D25FAEB07FCF95
-:107DA00023F31EF7B1F8FB1E53695E9E7D74BA4F34
-:107DB000227F03FA890C979F68A2A67BEC2AC7DF73
-:107DC0009329D783C7EE01F685ECF5A41FEF43D5C1
-:107DD000CAD0AFD05A78D76F8F970FF8575AE5D4DB
-:107DE0009BC7C97FC9F4AF18F77FA05FFAD69FDDA4
-:107DF000F6DFC75D7ECA77A2C9A9E8CFB87F226F38
-:107E0000EFDC97EA9CE77BB7467E5ED0391C4917CA
-:107E10001CB7975A977175253D06FD438E7FC5F1B6
-:107E2000235C9367DE857CB7C53892DAC7FAADFA72
-:107E3000951FB09F85D2C103F528EFC6CB942FA222
-:107E4000CD5EF34810FD99F89D95AB8AF4D1C41F1F
-:107E50002FFAC89FD066F3BD732ED5F1C77CC2B68A
-:107E6000032ECB71F4282B689FC708A29E7CC12EDD
-:107E7000B6869EFD90FB031DBFDF944EEFF7F3F136
-:107E80008837F93D77507E933187E7378D5A9EDEEC
-:107E90008BEB7CA1BDCE18B7AA9C35103F1DBD222F
-:107EA000BD17F5D0A9769E52D98BCFD34FF9825406
-:107EB00028217D9D8FF949AC9DB15FF69C0719057E
-:107EC00002E5F98C3A2A1969D6CFD467BDDFCBC059
-:107ED000552E42F8BCE5CCB81453B7DEB95EC0DF0E
-:107EE000454D0928CFB6AE6036022BAFCAB1F38B31
-:107EF000CE8573916E174A6103EFCDDBF00B89F2EB
-:107F00008BFDC727FF12E3A3F012CFA7D4CEE1F178
-:107F100056EDA792C12420682198362D3C10C7FA4F
-:107F2000EA1903EFD0EFF78F3DCED61DF7A12798C2
-:107F3000DD5FE2433B5EA37227B3FBB1FC0CB3FBF6
-:107F4000F1B99BD9FDF8FEBBCCEEC7F21E66F7E394
-:107F5000F307CCEEC7F7CF32BB1FCBFB732BC91F88
-:107F6000DF83F7194DC6DFB5DD4DF98C6DAA4F43A0
-:107F7000FAC994679595B7AACB187E378717521C14
-:107F8000A56A21CFA76FCD5948F674BF9F2EC3CFE6
-:107F900039E0B7EB151CBF1D1E6D8EDBF66CBFFF05
-:107FA0003369D0BD05C3F7633AFD90FFF4AC7E6C36
-:107FB0003FEADB5FFCF5D79BD8A7B533B7B5078B96
-:107FC000F13C4F8A7FB7F30A337F4F6BEDEE06CA61
-:107FD000F353C61C4DE1BAEE2E0F93BE81BFB7849A
-:107FE000723BD34E74ECC34C7DDC7966EE87997995
-:107FF00030115B2F192E2FE36E5F8AE2D656039362
-:108000002FB85FD4A7E7BFEE3BDB6F3B56CBCB3837
-:108010007FCCF3AEFC07783E5E3B2435F7FC9D73C6
-:108020000F64F31573FFA1DB6F1B2C49D3BD0CC18B
-:10803000B049FAA2C0F448D22BB524C5015B07F9B8
-:10804000DDEC376D39D130E62ADAEF5B5FF491BEB3
-:10805000556DE7BF358D51A9DC3466569CF2262359
-:10806000B3D4DE2CFD6C88140FB9BF4A6CFFD787E0
-:10807000D8FF253F3FEFD5B4778E8AE7A2DAC32B2E
-:108080007BD06E6F8FC7C8FFDF3D6696E7DE712934
-:108090005E41F7544861AE674B7195F46C19E75F28
-:1080A0003650DFA9B72F87EF238CCDC98F190877FA
-:1080B000503DBF9C30D1DFE28FF1FC62BFC6E3854B
-:1080C000C11211D42CE7309ECDE1E7ACDACB921A85
-:1080D000FA75DAE3329DE768D7A70F166F25BDE87A
-:1080E0008F3982877E9B6CBF43D32A85F4C2445D5F
-:1080F000AE569D4FE711FA90CFDBC38D2AC65F9530
-:1081000031E543F6AB68BCDFFF03837E3D1F008093
-:10811000000000001F8B080000000000000BCD7D58
-:108120000D6014D5B5F09D9DD99F24BBC924BB9B80
-:10813000ECE68F09241A34E026243168C449083C4F
-:10814000F4212E021A5A2A1B1045050968EB6AB55C
-:10815000D9908010A4067F2A4F2CDD58B0F6ABD6FC
-:1081600068E92BAF455E50E4F9839AAA55B0A8019F
-:10817000ACD53EB511A4A5EAFBF8CE397726D9993E
-:10818000CC26417DEF7BD832DC99FB73EEB9E7FF5B
-:108190009E7BF7D429F87321636D7B52545609CF27
-:1081A000A58E784A1163E1687976C324C6BE951519
-:1081B000FE22C3CF98C3B3488EB919B333A676C392
-:1081C000F394D64E7F7A658131A827CABF98F29E74
-:1081D00077E877FD29A66F661168CF8AA5F7FB5C63
-:1081E0008CD914269CB24199B9E5F7CF66F4E7948F
-:1081F000887FF706C29EE4FD785CBF9CF2DEA4A1F6
-:10820000ED9697F5394485B1F5DB3AC30CCA9F0B5F
-:1082100050A842B8636A1ECCEB869D2B59A48CB142
-:108220008D52AF4B0638367E292C0C970DED7F31E1
-:10823000CEA70A7B95620827FCB19D3A07FE5698A7
-:10824000E2A8662C0FDF8CC527FF0EA3EC3905FDD5
-:1082500097F740B9548307FE3FE93963B9AAD75865
-:108260003EF780B1CC58C81E9EC0D8EB2DD0E999FE
-:108270008CCD39F4E12196CED8DC58E8D9A77C8C96
-:10828000E5AAAE705C666C1E0B3DFB3694F31AD308
-:10829000584F0806B7B1A5B82E30CD378B01BE4672
-:1082A00046B0B2BCA5A98CB906FB9F2F67D23A3560
-:1082B000F635CD641319FBE1AD6D8C413FB17A21E8
-:1082C000BE1DE09FDDB06DF638783E50692B781802
-:1082D0001B45ECEFE1FC5CD0D929986FA66DE598C1
-:1082E000B1503F3C354D68837A3F3CEFACF5C5500B
-:1082F000EE9D5E1242BC03BEDE1B980FE07F5E98CF
-:10830000B7D7C77FA5F2D8DC71F0DC52F9E46C7CFA
-:10831000CE49AC0FFDCDAAE96A75407F972E532A4E
-:10832000B0BF7083B17D5EADB10C90F3F9C0BFBC3E
-:108330005943E11D091EF3F87A7F0FB428847FF6B4
-:1083400025D003E0338C9FA07D58EA974280E7DC7C
-:108350005A418D03DDE4A982DA65C10F1D1A3F98E9
-:10836000F12FC63218F259FD3C31DE0155725D76AF
-:10837000C27FEE4C21AEC0F8B94BFB7B4E41F97287
-:10838000973D2EC2F7ACCC6E01BF3FB08CB1CE2270
-:10839000022FBD2E617D1F70ADB117C2F7794191DB
-:1083A000D9800E58ED381A8FE0184BF838C2F1E139
-:1083B000227CE42D0B3DFB6318FF8A1AA72C42FD9B
-:1083C0002B1AF9771DBE8D12D0197CDF0874162385
-:1083D0003A938E24E267CEA1E5CB911EE798DE1793
-:1083E000435D9CEFC7930F9C5108702D173A67A40B
-:1083F000012829F666C670A1018348D73A3FEA787A
-:108400005ABEA395F83181CFECA7909FF1DFD984B4
-:108410001AE2B3A75DBF92516EECCEECDBC2808452
-:10842000B7CA2CD690CFD8BFA7F69F2D4079BB7C7A
-:10843000F9BA7517C0F794FE5FB072C69CCE6FCFC5
-:108440009891504E4DBD86CA3E6D1C98428CAFF738
-:10845000C0B8441FFF2973F836A86C930865C92675
-:108460006F0A150DB6CBC276C230EDC26C9364D1E3
-:10847000CEADB7033CAD85F54BD5E695AA7DB76982
-:10848000F0248E2F21DE64C52DC07A48D32519E94A
-:10849000E5EBC2913DD2BC236C937DDCD0760076B7
-:1084A000AB0EBFCD1AFE387E4F1CDF3E0CFCDF3416
-:1084B0003E46EACFA17D3F6DF8A0FAEAECE4F34531
-:1084C000B8ECA8AF14C56D4BE8E7AE3DFF78F11CE2
-:1084D000205E693E0BA5401F925D954340E765F223
-:1084E000BD2EEC5CCA6C9023C00FEBA1ACC2FBF5B7
-:1084F000DD9D2E05DE9715DFBD0E89BEAC2795A14B
-:108500003C98C0E4CC47A1DF09B2C47A70D52ED81C
-:108510006B4B8332BB84854AA0DF8C3DA9244F324C
-:108520008BCEFBA900E36666BA546C9F9659FD5347
-:1085300046F4C11429011F6975AFD7A7215CB3594F
-:1085400008595112E2AC0E996C3CF0109433A76DAF
-:10855000630D50AEF8D8A388C8D312D7771DD81EA4
-:10856000F5743BDB87FA25A8C99F750E7913E98F4F
-:10857000EB2486FA236DC2BD02C2F3007425025FAC
-:10858000969565CD6E8072D97E5B4851703E9D4256
-:1085900021CE272092DED2F1A9CB918A4F7B38D30E
-:1085A0008F67F1ED007FBB3DDE83F22A36F90A7951
-:1085B0003BC0937B5582BCC6BFFA010708EF4B97BF
-:1085C0006DEF2842FA96DE4BEC2FE3D3780FCA33D7
-:1085D00056D718C6F6BE999241FEA76AF22CD5A4CA
-:1085E000075AB2EC24CF747DC054499161DE8236C3
-:1085F0006FF68330E903270BB91C64AF2C203B4492
-:10860000607DC2A934983F5644B80BF83C86B4AF9D
-:10861000E6ED5920E4423BC799DADC8CF5E163567C
-:108620002B2057B82E5545FD2C38982B5801F3B602
-:10863000B14837D049ABC0242C0F8ED7C3703CA7AC
-:108640002BAD1DEDAEA75D6D36C45FDB73A03F6043
-:108650001E77D85923DA056D72C89505EDA39AFDEA
-:10866000B6AA7C6C0E963380B67BD16E90C232D2A5
-:10867000E52A7F710E83F7E9DEBE6FA39CFDA7CCD0
-:108680005FCF7015801CAD873AE781DCDFF4F8BA64
-:10869000582D8C77328F2909769E536A66684F3938
-:1086A0004F161ADEF7B4C08CCE1C2CAB6E5B038E5B
-:1086B000735DA64278AD63723BB6AB03642809EBE9
-:1086C000E23C1964CA24ABFEF30DEF7BC04E529C12
-:1086D000A3E93F8D29A589FD8F4BD2FF19A6FE6521
-:1086E000CBFE07FBF51AFA5D2331B2A3633E37AD2B
-:1086F000BBD92E589D59BF2213ED51276BEEB6B052
-:108700003B5B336D04F71D81E65E15DAD733607C81
-:10871000A0930BBF3C2232B26760A5805E58BED4E6
-:108720003F40C763B11EA75F5B4C6028972E94EC57
-:10873000063E99C28C65B35D54026B8DE3DA3C95BD
-:10874000BD483FABFCA98AD3027EFDD9DBC2A6148B
-:1087500097C07C53C34B19F0F10399FB5C6B02503B
-:108760004EE774F248E61F67A0BFD02B70FA5BE3B8
-:10877000B3115EC2F5395D6242BF61072B41B91882
-:1087800046FA76737870FC5E7FFE431D16E383D84D
-:1087900035D80FB355614A71C2BC7A353B7860BC9D
-:1087A000A9795DC80703E33959158D2702FE13C760
-:1087B000CBFE6AE3FD1EE7573638DEECE9C6F9CD9D
-:1087C00076C834BFD91AFFEAE3FD1EE757F415C691
-:1087D000C3F9258EF74FC6F9CD76CA34BFD922A783
-:1087E000AF81F1B2BFDA78BD2DA56407DFE100F9F2
-:1087F0000474925ABEC3350EC6BDC365970565B0F5
-:108800005D5DDD8DAEB9A87BDD53A7FB619CFA6988
-:108810005039177B993ABDAE98B14D02A78BFFDC5A
-:10882000F4E7754817C767AE2A257DA2D9D79762A6
-:1088300055D0C7974A1CDE59F9EE786B021E1F000F
-:1088400039A2021C0F02BFABC08F5B812FB11C6F1E
-:1088500009D0F321B0D7F1B90DE0C5EF0FB784A867
-:10886000FC484B0D3DF57E4A6BB8DD3EBED6DA6E58
-:108870003F238BFB7D9B82F2FCAB50AFD5A586508E
-:108880002FB29AF3999A6857B3E6A753E0FBC6CB89
-:108890005939EAC6333673B87D0DD964B7A796EF58
-:1088A000ED6D81F21D925D41BD7C87C26658F9CDA8
-:1088B00045A867AAD05EE5EDD9F9DC0FF385FBF694
-:1088C000A2DE9B83763AE0D53FB76F2FFA7F978180
-:1088D0005D4E7A991DDEFB367C7F1DFCBF0E2C8B16
-:1088E0006E264379D61C3F8D0F7FD2EBB2D17EE747
-:1088F0007FEE99798CFC8A700AD70B3E36FBD93D06
-:10890000086FC8A1C4A93F765F18F940B52B1D2494
-:108910000AC276D4D37ED4D3F0BDEEB093D910BEC4
-:10892000690E926B73E71AFD864D293D32DA3F9B43
-:10893000CA7DAC15FABF6CA6F1BBD3C9F92D6CF298
-:108940001B6699CA2021B9DF2D2EC8407BFF0E7C03
-:10895000357928DEA2875AEFD89B40A779591E1F88
-:10896000C501CE6067A03C3BC1CAEE6AC08FF95911
-:1089700064AC98DBFFBD2576C75E40FD2B28F7AAC7
-:1089800090BEB9DC18CA1F1C9EC95ABD075A7AA7E7
-:10899000BC5732085FAE1417500FE42D85F709F36A
-:1089A000957C7101FD1D263E5A8EFE8D791E0F08A5
-:1089B0008F0699C578FA339749EF235E7029519E47
-:1089C0009BE73B79C87C6B5F296656FCA46C427BB5
-:1089D0006ED67362A85519C4873EFFFF69BE3AAAD6
-:1089E000E919A6FA580FD0CB2B40EF1DDC8F616838
-:1089F000A7EAF40A15C87EBAF452F88E74A1AA0543
-:108A000088CF57C6F66FBB1ADB81EC68437F57B738
-:108A1000837A0EDAD00EFAAAFD5E7A9D83EC2DC61B
-:108A20001AE4F74B07FB4BB63ED8EFFB09FA73C0CD
-:108A30004EC43FD59AE843185B4301B2076E01FB71
-:108A400018FDFD68C387523AFF7E24C14EC53F47DB
-:108A500012FA6BDBF3734101B8BA5ABAA7BC674F7D
-:108A600090174B65DB1AB4E75AE302C5217AA01EC2
-:108A7000D80363972AB676C0FF55D80FD2A749AE60
-:108A80008F6D877E12ED94DAB9F2A3400FED65F594
-:108A90009D2178AEDFCCE3657AFD81B8992F46FE43
-:108AA000B99D353301E074A4FCE0277D301FB54D3E
-:108AB000622953A06CE7F60E7BDB4372417437FFEB
-:108AC0000CBF076220B770DEF5CD8F63396663E1B6
-:108AD0003678DE9FC6DB472597EC0C619CA47D06AB
-:108AE0004E3F3318B92F0BF0B7263B95E4A0E31D9A
-:108AF000CF4328A71C99154BD1EE5910FD7E18E3E2
-:108B000091B2972D0C5BD0D702CD7E8867F1B8CBA0
-:108B1000217B4F4126C05D17AC8F63BF43EA477F7F
-:108B200040FD4D11ADEDB09D5A3F5B6CD672E10931
-:108B3000EDFB15CB9FFCF061984F5AB13B84E4B636
-:108B4000FE1CB643B00DADBFCB1FE94E8423A55824
-:108B500096280ECABA27A33DB7FE8B07BB1F079402
-:108B6000677DE126399B257AE24291A1FDCEACAA30
-:108B7000A1ED77FFE38D00AECFEE1446FA95B11765
-:108B80002F427F72E34099C5048C73666AE5D8234F
-:108B900017A986F2E28BEAB08CB40B4439F99EEF48
-:108BA000AE8F617B819759EC7BBCBE9DD7CFD1BE88
-:108BB0004FB9F8A39FDE85FAA0DA417EE846CD0ED4
-:108BC000D2E13BDF2B12FD9CEF1D1E8F0735B9E074
-:108BD0001A3D1E0F5AE17177507D0BDFA7B06E0171
-:108BE000E938E50BD74DD8FE5F5A58F82A807D8BBF
-:108BF000B2E3E77729D4FEB0151ECF0AAA47B0BD6D
-:108C00006BF9919FDE0570787438CE65372581E366
-:108C10002FC3ADE78E6C2EE7E6F9B8DEC8D2EC4D77
-:108C200087A337301B9E72E58F6E9441DEAC2DEA30
-:108C30006EB48A3F9FF0DAA85D6692787B8697E3F0
-:108C40006D574EF87384A35D7ED285E3A70A2C8C02
-:108C5000F537D4F43121A1DFB37D7C1D006E9B1765
-:108C6000DAA54E662AD2998779E20CE8CC53C9E19D
-:108C7000DF10789D29D0CE530A4F37BEEF23FE4731
-:108C800097830B351074507668F491714FC745483F
-:108C90000F59A24E6F791D482F0E9B5E3FEF622C3D
-:108CA0007765F172B92FAF23960F7AC6016D502EFA
-:108CB000E43AC8DE31CF2F4783B7C3AFFABD7E0B8E
-:108CC0007C3AFB689D364E708462B0AE536CBD8DAD
-:108CD0008BF1DBC56EB2D7E07D633C61FED3353AE4
-:108CE0009CEEE5F6D6C67FB81AE316EB918C4E27BC
-:108CF0007A4F9B4E277AADE9F41CC47F029D7EC655
-:108D0000ACE9B4DAAA3DD0E9B956F8309745A66E79
-:108D10006E0200A5CFA73F72176AAB7FAEDDFC38AD
-:108D20003CA77CE196BC50473C83919D687371F9E8
-:108D30003E28F723D3B07F496EA6F7A23B4CFB3504
-:108D40002F65F1FE87F47B6EF566945BA3E8378CA4
-:108D5000F336F73BC6CBE19D72B13B12B7C0FB497E
-:108D6000AFC4FD521F1F3F19BF94FAB8DF9C945F38
-:108D700074FACF0947108E91F8E5C2417E593A3A0C
-:108D80007ED941FC9256C6F9252D09BFB09893F8BB
-:108D9000636D112FDF728F8FF861807F622546FE31
-:108DA000899518F867DABD2554DFDC3E1DE76D8133
-:108DB0009798579F47B805E7A19E2DB78B646FF42E
-:108DC0003194535DAC7F8F13F9B056086D87B7B3FC
-:108DD00062BD0D2E05BFF7B2D9607FACD3E87E2B04
-:108DE000C283FE50B516CF927AD9659EA17CECA9BC
-:108DF000EC298D24E0BF40C3E3E5BEF05D387E176B
-:108E0000EB1B8F7669B275BA5783F7A6807AAF15D8
-:108E10009D8FA47776A2DEF1E393C39DF585AB1910
-:108E2000E58099CFA7DCF0DB0F1F1EA69F5F6B705C
-:108E30003CA63D4F83EF1FF35AE9E9A0FA4B13DF3D
-:108E4000570A632DF9FED756ED81EFFFD50A1F5F54
-:108E500083CF9FB6E2F307BDBCFF91F02CF9389E9B
-:108E600025DFD7C3F3116D9DDE3A7D3CBF9504CF5E
-:108E70007FF4FA4785E72349E4EB512FC1618BE189
-:108E8000BE00F23BFAEFEBCE8DF5E37EA8051CFFAA
-:108E900099D88F4BE1FD8069FF9900743EE5F37529
-:108EA000A188055F42BB6389F0EBEDEEF5CA9A1F1E
-:108EB000A1AC44BB7ACB3FBB693F01F4E0DFBCDF30
-:108EC000AC9CB7F92CE4F1141B974397DF73783D02
-:108ED000C669BE46FFE956FD3FAFD1D748FABF2865
-:108EE00041FF633F6679D7C5783CA5C31FC9F71119
-:108EF000BEFA2E42F9B4F5D62C01FDBA7CB5474036
-:108F0000FBDFAFE9978D5EEECFE8EDB64A3D828498
-:108F1000F59B65212618FA3B63B8FECC70007CE314
-:108F200011BECB7DEA59F8BCD73B60EF9D963D540E
-:108F30001D502BB03DC8E94A1C5F3DD328A7F579E9
-:108F4000D8C2DDAC0FF50BB8DF710BBAF26BFA12B9
-:108F5000FAB980FAD1E47D954FA72BDEDFE9EA1B51
-:108F6000806FBA06DF0C7C9AE133E36524386F46E4
-:108F700038797F9725C299AC3FDDBFD6D789F46990
-:108F8000425C67E1A0BEBE12FB73ADB1C5986F90A5
-:108F90007F757D0D922915FBDFE2E071D42DCBEEBC
-:108FA000AEC37C83AEDBE4724449EE52AEE7946517
-:108FB000851457BD56EBD70CFF407B47F7F8496542
-:108FC00034EE721CF7C25AD683722303ED048A3F33
-:108FD000C812C617B29C9D018CCBAE173A1B17A1C5
-:108FE0001EBDC84DFA9605E65AC6A7F4A71E7FD245
-:108FF000E7CD029523D46FA5FA725A6733DA49A3F5
-:10900000AEEFECB4B4AB7EA8D95530BFF5C3E235B2
-:10901000E0A3F8968EDFA1E3F0F5AB0B370B88EFFA
-:10902000D4321812583235DC499BADB6E238EB43E6
-:10903000FBA914E885FA7BDD32EE37D8DF5A1DAE86
-:1090400007911EBF2E5C7ABDE4E3F17AB87F46F14A
-:109050000E37975BF401CAC79EF35AEE1FE8CF3B69
-:109060005A645502FD734C5632305E7887A6071954
-:109070000B052EF3FCF7D71B9C479CC73B4DF5A374
-:109080008CD33D0BB8C8BEC3307C22DDBCE6E3FE0A
-:10909000684776F8392E1F4321A46B28BF80F867F4
-:1090A0002E287BA8BC9FCAF240F965AA1FE0F5995B
-:1090B0002C8F0ACFD0EE0FD44E1AE8E74DEAD73DF9
-:1090C00030EE41FAEE1B28FF91BEE7F3FAA31D270D
-:1090D000615DF9FC7B459AFF67929A81FBA39747F4
-:1090E00017539C687EF45A7AAE6B91EB301EF77280
-:1090F0004B7F7B3B3C2F9FBF5846BB7FFE927B68DC
-:10910000FF5EEFFF52F42B90DF156906D94545B697
-:10911000F036F720BF0DC2D1AEE599F535201DB967
-:1091200054D6DF510EED6B3E6D6F37E4397552FE4C
-:109130004C8A227D9E1857D7E5E0C70EF573DFE90C
-:10914000D1B169BE8CED85F13F7317C76344D7F584
-:10915000B215BFE8F34ED6BF3EEF647246C79FFE1E
-:109160007E7D7185CCF37FE206BCA4943450BECFE3
-:10917000A58206A7C7A5F11BAF370BC679B28CE84D
-:109180004341FA9DA5F97166BDA08FFBB12352E45E
-:10919000F7E37E0363B75558E07794783BD0B23459
-:1091A000DC604779DC9D42FBF74CA638BF5EAF31EF
-:1091B000C9FC2FF0733DC29C2ACD67C3ED1971B471
-:1091C0003B3634FD5AC6E04ADA84CFAA62F814FA74
-:1091D0004F2C42F972BB87F2311A9B4E54B526F4DC
-:1091E000BFF0997F7361BCB771C26A3FC65D16322A
-:1091F000E9B3C47C07F3B88DD11B886E63AD42A37D
-:1092000095BFF56636E7EB85982223527F4712F724
-:10921000919B940A07C6279A62C6FD1CD0900EA4A3
-:109220008FC5EBCCEF13F67344EC9FD1BC63B899B8
-:10923000877A6F8D8DE86D0BE00DFDC0425097F879
-:109240007C333B4BE3C75EC2E77F373C6F66CB7C2A
-:10925000DFCDC562695983749313E964A89F3C9577
-:1092600002ED6FFA3C7A7E4437E9A97BDD7A19F486
-:1092700016E03F5CA6D939C5FCBB0DCBE8FFA4F5D1
-:10928000EEB5011FAFB9EFE98B03E3A1BFB248C050
-:109290002653F905C98FF6172FB3D8D32FEC257BAA
-:1092A000563E4B0801FFB7EF7EE1B902F2E7357B8E
-:1092B0006CF70B648FE965C67A18CCA72B75A0AC48
-:1092C000BA02501E3B508E6179AB66C7AFB96FF7DB
-:1092D0000BED649F8463FE043D59C7787CF99BD6EF
-:1092E0008F5D81AB3A319F28566C237F2FD5C48F79
-:1092F0008FFA1D54AF28277237C233EBB67E09E3CD
-:109300000D8EE0EB3E9403638A8FA96381FEC7D480
-:10931000F2341956CAC7ED2A5E45764397B62EF049
-:10932000BFD5A8F706D7A7D7B43E7C3DC295BDB43C
-:109330003E9EB25E5A2F1B9629EEC7F7E32FA9E493
-:10934000F686ECE4FB0ADBFD9C1F76F8B97FBBC315
-:10935000CFFDD38CE2BB29BE9332C346F533B4A70D
-:10936000598EEFF04B9A3CE7F8D81D8C74FB13EC48
-:1093700056781F2EAD44F9E6CBC27DD6BA62E926F7
-:10938000A4E79F68FE29ACD35DB44E45BED4085F08
-:10939000B7DFF8FD16EB563ABA757BA32542F22AE1
-:1093A000D9BA5D3E5F0C5BC5DD5ED0F0F049E39F4E
-:1093B0007E84D359EEEA77E03ECCFAE24D86BC6A71
-:1093C000D78ED93D980BADE755AF4E4BAF45B96D34
-:1093D0001EF78D2FFFC387F89DF90FA7A57CFC54BE
-:1093E000938FAFB734523B586045CA2639C078DEF8
-:1093F000CB409E9870CA49D37B03F3D0AE24D66786
-:109400006C6EF830ED572F0A880CF7C71732635E81
-:10941000198BEA79C13C0FF60D095C5340E11B3111
-:10942000210498624DD26C5DAE18F2C3E6CD9DBDAD
-:109430000FF7E1176BFBF0205F0CDF9798F2C6AED9
-:10944000686C0A3768DF8FD3DF71C2D35C85DB8D30
-:1094500073DD6ED2AFF3C2F3C30D09FB716FFE97DC
-:109460006899877E41B68E9770B8A164285E16858C
-:109470000587AC8C8C1F333EEA248EAF260D5F66C9
-:10948000FC98F1B078EE6C5A7FF3FCDF7085093FF1
-:109490006F007E305FD88C0FC6229720DDBE395F0B
-:1094A00064681F4F1767DA314F60F16C81617ED1BC
-:1094B00012164AE7F9C1EAAC6909F09AF168C6D711
-:1094C000E2A758A807FA5D7C9F87D6EF550D3F624B
-:1094D000CF5F695E619857079FD7119EBF2AD3BCA3
-:1094E0002E53CB9FF5C1F7483B485BC54A8FF0F937
-:1094F0002C82F974C843F5C90956DB8C74B2C49444
-:10950000B76086CF0CFF4C94839387EEE357646B70
-:10951000FBF8135948DBC7CFA0630D21FFB0790BCF
-:10952000837CCEE96B6174F6C078D8AFC022036546
-:1095300019F03BF379EFC679F0EF550151C13CC109
-:10954000D9F3C7ADC1F9875938A3A708EDFD7E3B14
-:10955000CA91CB1898B1D0EE429824EADB70430A46
-:1095600095F57E8F757E6A273D1E61CDDB69FF5DB7
-:10957000C9983B21B97C591570D078663B656679EE
-:109580004906CA0B333E743CCD43BCA4115E269EF3
-:109590000E5E5E445D85FE2CC6D1601DFBAF65ECA2
-:1095A000A1F2C1FD6396AF727B329BD1FEFFB5D9AC
-:1095B000999ADDD14C7187059A5E3864678D4FB8F2
-:1095C000F93E7245827CFC56B0EEDAEC043B55DF86
-:1095D0004776B33EC2DF952E778F3891E8EEA30130
-:1095E000FA20F9A5E76B46285F53CC58A6505C2CAF
-:1095F0002D7D22CB00BB98F179831F7353B61FDFFB
-:1096000017C6D10898F9FC4FD7CD5306D76DFD5535
-:10961000DB3B511EA72CF9558C3A57783E479AB63A
-:109620006E75DABA0DD8D1A5F03E01BFC73A353B09
-:10963000AC548BE3E31F281F2B56E3C3F9AFFA3A70
-:10964000A69482FF61C823EC247CEBEB094E443FD7
-:10965000F265242051CEB08DB9C83F8EDCC2F33103
-:109660001632652BE6072D8CDA8F25F613094A048E
-:1096700047647D8A163709513F8B82BC1F56CAFD4D
-:10968000BC01BA8F41FB84FC479B0B4C496C9FC9C2
-:1096900042E83F417FD9A8EFD9BA8471C60E1D3781
-:1096A000597FE676A2B67F2B3A43A150829CDEAE6C
-:1096B000D9CFC70295DDB6B1C9F1B7C8E555A584C4
-:1096C000BCD8234157A3555C4CEF4FD7DF0376221C
-:1096D000BBE6C5443BD1ED687AF1B90B12EC44D638
-:1096E000F422EEFB7F553BF1E5ECA617DB617E7FB4
-:1096F0007FFB9F287FFC5833084CC0A3373A951D49
-:10970000F5A27C90497F1536824785C9DF92321ECB
-:10971000E93D259AA74A09F9B26F662B04BFB758ED
-:10972000A5FD3268DA8DAEB8570A0988B7BBB5B85F
-:109730001910EEF8D99EC4767CDEFA784E974C70FC
-:1097400038F4F158A895F2EB6732D2237A1E88CE0E
-:10975000D77A3F47B38DF1BA51F0F3D16CFF507E09
-:1097600016C5E6776F4739F1A2487ED87702B7D0A1
-:109770007B733CE0E36C6E1F8E11231FA35CE86DCE
-:109780007CED3B3743BB153B9C2154C3CBBFF7E17A
-:109790000FAB14C4135FFFF94B16DF5785F32A9103
-:1097A00064DADF28E0711847AB40FE6B4A9123BCB6
-:1097B000039E877D75B93909701DF6355079EC0C1B
-:1097C0000ED731E8B343C1769B1AC95FF4F07DEF41
-:1097D000638A92C148AE30B22744277FBA73785C5F
-:1097E000D89DC3E379520EC7B7EBA4408B8474DDD8
-:1097F0008CFB16528CF2A05D27257AEF10044B7B70
-:109800004DEFCF75128433E22BCDDCDE41EF713E9C
-:10981000D85EF432837DE3CFE176B27F008E340EE2
-:1098200087D7DC4F3A7FAFF19F198E15D9538388C4
-:1098300097C33E353787C751B81C76BF70409838FC
-:109840001A79CCF3F52F094A2E8AEBDD2EC44B4052
-:109850003E75941E5B4372ABC8D58CE7A412EC270F
-:10986000819FBBE1E72A06EDD3FE69732A317ACDE9
-:1098700094074243EDAD772B4FCC9B8305EDFCC4A1
-:1098800095BAEC8D4119ECB977B4629332762D8696
-:10989000FA2FADE5F6D962B4CF4224B70C7697D94A
-:1098A0003E7383BE9F0374B12420C94817663BAD45
-:1098B000A3721ED9351D60D760BEF6503B8DCB9B81
-:1098C0003BA336A642BD976B45F2335E2EED7BFE81
-:1098D00042D417357685F44569FF9D73E8FB241A59
-:1098E000C7ADF977509F9F7708A5C54BE0DD2BB535
-:1098F00047DD8B13D6FBE59AA3E3D12FD89A24BF7B
-:10990000428FD3ECBD95E77FBD7BAF107722DE6E33
-:10991000136DD8EFC2720FE5AD4E13DD34CEE28D7C
-:1099200062DC493854D3A7650FDA8D4CACCD7E0D7F
-:10993000F170979DE1F9C1829BFA0C76EEC2A8D135
-:109940009E8B3483FDA39CBE1D68B6FFCC76CCF203
-:109950001CCD7EA9601568BFBCDCB2931D2D19B467
-:10996000636625D9FFD6ED98F36CF5DFD5E899F657
-:109970000F6649D6FBFB9768FE290B717F709AF83A
-:1099800011ADD7B190A420FEDCB7BC40E73ADCFFB4
-:109990002586ADC6BB33C7A1EFC791BCDD5A914642
-:1099A00079D77B6E3D2BA78FD64BB9BF16D7FF0556
-:1099B0003BC9C164FA2D252AB2629898272AD05350
-:1099C0005FCF31D11496A81FC624C953F8710E9FDA
-:1099D00087FF3666433F3B33C6542BBF54AF07FE69
-:1099E000E8748C5143FD9E4C80EF86621BC5FD756B
-:1099F000BF34C5CECFFBDA77AD8CA17F3A06E0430A
-:109A00003814800FE57051348DCA63A35E7A8E8B53
-:109A100066D2B3389A47DF4BA2E3E87946B488DED2
-:109A20009F193D9BCAA5D149F41C1F2DA7E759D109
-:109A3000F3E97936E82DAC5716ADA3E784E83FD3B8
-:109A4000FB89D139F43C273A9B9EA1E8B7E97B79A1
-:109A500074313D2BA24DF47E52F47A2A57466FA4FE
-:109A6000725574253DABA3DFA7E7B9D1367AD6444A
-:109A70005BA9DEE4E8062A9F17BD879EE74737D13A
-:109A8000B336BA85BEEBFC9CA6D9D32F05B6C994D4
-:109A90006FCF7ACA503E26E3C3439A3CAECF51F70C
-:109AA00022FDE9F5F66BE70ECCF50EE40C9F77F39B
-:109AB0009AB65E9F848EFC088FD3EAEBB63E307C6C
-:109AC0001C8195F946D8B7E2F37B2647E1F42B7564
-:109AD00092BDB1B599513E98A7B2574079D3159030
-:109AE0006658D1913BC0F3C08A722247517FB88338
-:109AF000EFEDC5FDA84B63BDBEA9482F215FEA5419
-:109B0000E86F4CBB8DDC6B85C90296950626F7B0D5
-:109B1000C1780ED85706BD260574FBAD77E62484C0
-:109B2000E7ACE20AB25FB5FDE4FDB78E65E8776C9D
-:109B300075F40812CACB558C25DAE15BD72E7A383A
-:109B4000F19C8614E0FC39661D7B1AE364459D4A4E
-:109B50003D9E271CB7597D1A533C4BE291FA54287D
-:109B60009FF948EC697C8EEF8ED7A7C1F3EC9D3D41
-:109B70004FA3F899D0D357EF86F239CFB16730FCB5
-:109B800054DEAB4CF54079D201F519DC26A9EA8BFD
-:109B90004C4D57109E785B3AC0B3F51D30B4A05CB5
-:109BA000F351A7086EC9E0FA83DDF644C2BAA414E3
-:109BB000F7AA22FC33FF26B91CE5EC56A92F25B3E2
-:109BC0006CE8FA74E1BC719EA057B66BFBE872C2F8
-:109BD0007A8402821E0FF40512E2815DEDAF523CE1
-:109BE000B02B55AEC35057FF34263FA4201D733F02
-:109BF0002175CD58D24F3ADD017E0DF6A414E074E4
-:109C0000B775C0DEB4C66F08F15BF5BF07BFFF9E36
-:109C1000A3C9AF24F87D09E7111C998FEB029C2F93
-:109C2000818F2F085425AF77B5867F339EB74AF2D0
-:109C300059842F37B3C5CA07D7AD49A3EF91F0FABE
-:109C4000EDFF65745B13181EAFACD2CBE3CC5A7E2C
-:109C50005A3279B33FC93991E6C01039C7E3A5320A
-:109C6000C8B971C9E55C6D6004F99524DFE1F6803F
-:109C70009EEF10FE7E601471FD3B6D721DE6BBC44D
-:109C80002632F213C0BE6CC7FC9D3131A582B6B13D
-:109C90005028231E2BCE263FBD08EC0DA98261AAB9
-:109CA000630F3E2FA9CCB42D2AC3BC068DDFE4A6DA
-:109CB0004022BFE9FA7E901F75BAC8EAA273164027
-:109CC000AF984FB84BC3D3603F3C1EB1F696DCAEA5
-:109CD0008E0439D815CAA3B25E3F19FDBEA57D0713
-:109CE0007941FBFD97D45AE79BFC6B40D4EC9C7EFA
-:109CF00015E93C3685C974DEB9FD08C9A74C904FFB
-:109D000042110F0FE1F8F9D1D487314EFBEB40B689
-:109D100026CFE5D4CB3DFFFFE8B9037C75E2A75A17
-:109D2000790F9EAB18037A484139590BB057A29E60
-:109D300073D0BA2B8CAFA352CBE23D02E1AD07FD4D
-:109D4000E6988D9FCFD8EFE85649EF383265CC3F83
-:109D5000D9E58FEC0DF893F3859CA694E3A2FE6100
-:109D6000F37533DD41CCCB9153B1FC2A94EFACC1F8
-:109D70003CA13EA695EF744FFEEAF1873F04AEDDAD
-:109D80008FFB54D501F535A467A0EB3F205CEA9921
-:109D9000B244F1E151EE3FE9FC39C84F72B9CE4F00
-:109DA0004D65240FDFC5FEF5FE92D937FFA2C9CF5E
-:109DB000FEC0F0F68D4EF7A76DDF68F0BE3302FFF0
-:109DC000CF7CFEB5CDDBD860FCCF93FB46AFA4A023
-:109DD000BD3D951D9D8471AF5E4EF78CC7F9548CC7
-:109DE000FF011DA454BA4C715B6186167719365E6B
-:109DF000ABC793F5789F1ED74BD7E80A2F0C403D91
-:109E00009E5E234B8BA8BF3E7619F4E709723CE9AE
-:109E10007C8D720BF7E75D6BB2A4B16583FD82A404
-:109E20002439D5D5C8E48E4CBEFF9A01F2A573350E
-:109E3000233F2FF6B248FD1F576D1F3AA1DEF14AAE
-:109E40004020CA05952972B6760E81885C267A75FF
-:109E500032D68DFE36FB41C8E5C038F7E702530124
-:109E6000EEFD9F8BF49430C20D8D2E099587B07155
-:109E70005D466D08F703C5A35006381B326A33B040
-:109E8000BC7FFFA410B388DF5D116932C497CC7822
-:109E90001AA8F79D3594AFB06584FDCF9AA043B75B
-:109EA0003B2B8268EF5CD5DFEE5006F73FF57DBDBA
-:109EB00060F19317E13D3BC165DCFECC65F1D64412
-:109EC000BB29617FB116FBD932B8BFD87B46E2FE11
-:109ED000E28ADCDBF0E8FEBF0CEC2F46CEC1FAAA2A
-:109EE000B7BB1CE953CF87DDEFE0FB006CD28B3EA4
-:109EF000C5823E16943FEB277AD4FC8921DFB5B8A2
-:109F000099D90F9E1534C6F18F87E664F4E0C72413
-:109F1000717C3D9EA7FBC118AF932DF9CE887F7D44
-:109F2000FC0502F763995D2079A7EB4D902791A07E
-:109F30009F9A513C5A750A94AF753CB45821BF287A
-:109F4000897C19D837603D2556FBAC0BB4BC13F3A4
-:109F5000FB5B825C3F2FB0F338A5B0724904C75D4C
-:109F6000107409CE043BE9EA20D75FFAFE8B23F791
-:109F70006415E2D9E1882856F336EFA35C1D64032B
-:109F8000E7DD42167A2F199E0ED83B695FEEC012AC
-:109F900091CEEB1E8F9C4BF73E24930B6F21FD94CB
-:109FA0003016CEE5E30DAEA335DEF43C19F37ED5D5
-:109FB000C0F7A6143A7F63CE97794CC3DB3E0D2FD2
-:109FC000FFDDF932FB34FCBDA4C567F478D6254922
-:109FD000E4FD79B6FA47888E4688CB9CA1E7FB68FA
-:109FE000F861CF8CA77B3936F4DAE32902C263A388
-:109FF000FDCBC63F8821B4BFF4766E93BCD0F37717
-:10A00000F472DA4981C513F611D2A46E8A93A69D23
-:10A0100094E8BD99FFEE30F19FBE2EC9D6595F1767
-:10A02000F3FB2E6D5D0E34FD5B00CFBB6C4861967B
-:10A03000F9445F048DF177731E40B27DEE835ABB05
-:10A04000E391C93928971B1DB192D1F0BD8E9F377E
-:10A05000BEFC8D0BF96CC349E70CABF57835C8FD38
-:10A0600016D0A7EB12F7413DF35F6BC75ED324E335
-:10A070003EA8AE4FF57DD0B44AF33E9AF53EE806D1
-:10A08000662D1F93ED830ED9FFD4F4ED896092FD08
-:10A09000CFB2E1CFB3EFD6E879A4BC8F2B1CFCBCC8
-:10A0A000ACF9FD8B03EBB0BEE047C05737363969DA
-:10A0B000F7A9A7C9497CB8B82985E2B28BCB79BC8E
-:10A0C00077F17D82B65F678CC3BE04F262199EAFE2
-:10A0D000D7F4CE5116AE467B7456A560D8270FD75D
-:10A0E000A618CAF397DCF312DE9BF0728D5DA1F81F
-:10A0F00033F41543BBA096E72932A5FF4E8C73EBD2
-:10A10000F1677DFD5FAE3D4AF7A0C5C0CE2F096166
-:10A11000FC5924FE7AF9F549FC5E3A61703F5C0116
-:10A120003B61C379E328DFE360D9B728CEBB01E305
-:10A13000E230D30D5FFE6606D11128E518F2EBC4BC
-:10A14000AC38CAC7C5132AB2912E9F99F8B907E354
-:10A15000A2EFDE76DC8FEBD4D7D24C7907E67537E9
-:10A16000C799CDF1E5D38D279F9B3B902740F4F015
-:10A1700092299EACCB2BB3FC4888275F983B8A780A
-:10A18000B22EB77439A1CBAF83651D6F3F04FF3C7E
-:10A190001871124C6F69F31EE04B8D2E0FEA7CF89C
-:10A1A000A593EC916726FE96F2ADF47A2DC14CE2B0
-:10A1B000C36F95C5EDB43F8B790AA583EB323F722F
-:10A1C000ED4019BBFDF6D29506FA18905323CAB19B
-:10A1D000E1E59498CBE313C9F235753E18AA7F4A9E
-:10A1E000C84E4DFBBD3DEE2AFAEA7AA8B1E9D70A7E
-:10A1F000B683E7666A3FD111895BE827333C69275C
-:10A2000045169F94F85EE1EF07F48083BEC7EA9598
-:10A21000D5AB7DDC9E6E23FE8C3969FFDCA7B6E4EE
-:10A22000427D9F5F8D213D3CEC535B7313E4699B42
-:10A230009DEF478A361679C2022F4FE56A7A9985D3
-:10A2400003D8DF9A3AE3792EFDB93D97EFEFEDF1B0
-:10A250005707D0BE6E3B5C1E40FED9EBA9267B3B68
-:10A26000D9BADDA5F313CAAF92417F62A3B6DEC0AF
-:10A27000A22AEEE3AEB1870389F1C675B93C8F23FC
-:10A280007DF293BD6837B7C936CA136C9379FE75F2
-:10A29000BB5B9AB14D6BE733B493F47354745F8630
-:10A2A000E436E6573FA5D93BC9E6F954AE4DBB5F4E
-:10A2B000B4E7DE5A6150AFD88FD4B9E8FE07A6CA1A
-:10A2C0003CBF2964C8A7B66BFAA5DE94AF21CA5F6C
-:10A2D000CD6F0BFA23BB722DFCB63D3EF5295CEF2A
-:10A2E000A81473227D445DD67CFF8CB6AE3FD0E6C9
-:10A2F0006BBE575534DDFB209AEE7D88D537FFAC19
-:10A300000FE96DB5536EF3D13D0F74EF4314AF5C9D
-:10A3100082E7DF53783E0BF87FE7F2F306A13E9425
-:10A32000AF2CE0A2785467BEAAE64359F4D81E5A6F
-:10A330000DFDB5A9F52A1E5DE974DBBA709F2F33B8
-:10A34000183988F398EA9148EF745E9C4A7A08BEFF
-:10A35000A77039C264A19AFC41BA34057D703C5F94
-:10A36000660F38289ED516617DCE71FCFC3FF653F2
-:10A37000C77AF6D716A1BDEDAA443CED0F4DCA88A9
-:10A3800058C809FD69DEFF7FFBBB6F1652BEAA18D5
-:10A39000F908FBEB6D5CBC11F7F557EC1443B88F73
-:10A3A000F09DEF1D3C839F3732EE33DF9F36A50FC4
-:10A3B000F559D4EDA07A7B3CD59D88A736C1D389C9
-:10A3C000FE6EDBE1953F413CB6B5F238B719CF7B65
-:10A3D0003DDFA3FB358EC372627DF3FD1AAC73259E
-:10A3E0005F27A78BF62D61BE2CAF8AAF23C5070F61
-:10A3F00079E81EA8E3FB9F71237C5F63DE697955D2
-:10A40000C3CD3B5F26FB45A31F2685D7E1BC6E1657
-:10A410003D9D1D3EBC270DD61BE1DE65277FFFFE5F
-:10A42000B4745AD728C087EB2A7A1A5474C9FEBA72
-:10A4300053A4758E4ACD342F1693D8767CBFEBC4C7
-:10A440000FCF473A50B368574B2C6826BCFC15F029
-:10A45000B2DA022F403F4579B85FB4EB46EAA7D3A2
-:10A46000E192D1B269F354D379E5D1DE2F5296C788
-:10A47000F924E17E91B2BC2A8BFA9A9F85FE368E32
-:10A480005B27B3CFE26C10EFC9F257CED7FA1FE8C3
-:10A4900067E4FC95F313C7D7C7FD1AEB3AFD74D6F2
-:10A4A000B5CDF57FA7A39DA58AE9A1944228E33AFB
-:10A4B00021FE719D70BDB4B80DA92005E940EEC91B
-:10A4C000433AB8313D84F43992DC90185F77BB048D
-:10A4D000F40C769D538E1CA0B38B5ABC479727660D
-:10A4E0003E6B7319E5559B7E2FDFA1D1C92BA09739
-:10A4F000AB71DDCC726BB474B2324F30DF43B33228
-:10A50000CF9F9C4EECC1F08D8877C4535E05C52B60
-:10A51000BE8BF5F7EF177738C6E2783C6ED61F642E
-:10A52000F2430979593A3CEDB8D9CDE3D414FF9000
-:10A530001A19C33C386F694890CB464547ED89F0FE
-:10A540007D037474D77074E466BD745E63B99E9FB6
-:10A55000B363F8FC9CAFAB7F603DBB109E36CFF77A
-:10A56000883ED7DA5D32BF47EDF4D6F5D1A1EBFADC
-:10A57000E8F0EB1A791CBFAB79D5748F11AB692267
-:10A58000BB69975F7D13F3C5981432C8C521FCA33E
-:10A59000C9ED9BCF54285F7577AB26E75A9D32DA19
-:10A5A000E3CFFA6E7C1CEBDFCD9430C643A7D856C0
-:10A5B000119EFE0AF37B284472B514F77DA22C3558
-:10A5C000A4E9D1A7110F339456210BDEFB162836D0
-:10A5D000BA8654D9C46C65A3C7C34B43E5E04B238B
-:10A5E000C8C15E8D9E6F427AD6CFDB279383874E9C
-:10A5F0005F0E1EFA86E5E09FF34E43AF7F03F2E65F
-:10A600003384DF2C6FDC1A3F5F1962218C978F3601
-:10A610009F0DEC4D05F9AB2EDD45F4D3F68440F9E2
-:10A6200052608747A8EC7191B0D9EB71F0FCDF1D47
-:10A63000FCBB58CFF16CC6D39779593CEFA67B652C
-:10A640005832E449C5881FEE528FC9C522E6F7D7B4
-:10A65000123D7B357B46CFEB4FD7E4FF809E9F6951
-:10A66000A3F1BC055CBE7BC1DE41BB88497D0CFD0E
-:10A67000F89BF378FE3EF003D1378C12467EC8A8D3
-:10A68000914C795A9C5FFC12B777327D4C205D83E8
-:10A690007962F0FE04D813783F41A66A6C7773EABA
-:10A6A0009502EAADBE2677B340E7F4C37B7E0CE5A6
-:10A6B0002CCCF702BEF1CE30D6F7B384B2857F1E24
-:10A6C000AB67A598B75896AFF9E90E1620FDA8F923
-:10A6D000E9FA7D81E2C8795F95F9A3882F9E97AF4B
-:10A6E000E79918F571770AB38CAFFD473E975B0D7C
-:10A6F0007D75F56857AFF230B2AB56A1EEC472A6C5
-:10A7000083EEB509EDA97459DD5791A9DA0CF7F379
-:10A710007A67A41AEEBDF587B30CE59CC65C43FDD1
-:10A720006064ACE17BDED2B30CDF0B9A2B0CE5311D
-:10A73000D1F30CF58B00C189E571EB2E36D42FE9EE
-:10A74000BCCC503E73F3B70CF5C7C71719BE9FFDBD
-:10A75000C87586EF13BA5719CAE7ECBCD550BF8D40
-:10A7600059DFDFB9219FCB29E0779263ADEEFA463E
-:10A77000FA1D0DD96188F32FD1EAEDC9AC2EC57849
-:10A7800048DB91F252F287D3CF1BD61F36CBC5647C
-:10A79000F2D8FCBE5D1BEF93A7DFAF5E86748E42DE
-:10A7A0001EE4D227EEB7D6E29CD697F1BC04FD7723
-:10A7B00031CCF7F20FEC534A2ACD67419683599D6D
-:10A7C0000F5892AF58EE2FB40B2117EE1525C39BEF
-:10A7D0004E8F23E1ED4EADDED7C5DB21C118074218
-:10A7E0007DF284055C7BF307EE3B78389FEBABCAC8
-:10A7F00054F230F83D0EA7AB4F7438409F3C915F48
-:10A8000035343FFC93C6D7AEBE5FC1FA57F3FAB6F4
-:10A810005029AE4BB27DA5BDF9E67DA5AAA528E7D6
-:10A8200016785285C4FB9A7FA5D5D3E3D96DE99FED
-:10A83000D3BE529B23543A9A7DA55FE19D1B558858
-:10A840007F858FA7AFAB5D0DC896FE9DD98E61CF7A
-:10A85000E33D1831B74479C366FF2EAAC96DDD9F69
-:10A8600093F6D691BFDFE61E4B791F6DEA2AD29789
-:10A870009D49FC5CD0977F447C4EF5DC64F0E70694
-:10A88000E3012A8D076DC96E6A4BF0FF715DD5FB40
-:10A89000F9BDDADF801FFC51FE69D8090AE37EF0BA
-:10A8A00071C6F1745CB5919D701CEC0494BF6B246F
-:10A8B00046FBDEB14A41B1F28B3B576BF6E16A8E43
-:10A8C00037F37EB7D9CEB824B492F0B606E8C955AE
-:10A8D00089F1386EFFAEB1F3FB37656F3880FAB699
-:10A8E000DFEF600F01B47BFD3C3EA7E3E5ABCAA3FD
-:10A8F000CC8221767266C13076F234B1AC1BEF6D3A
-:10A900003D7692C745143C8AE8C37BC8F9FAAD7A14
-:10A910007E4E6C05EAA922A919F3D745A664205EEC
-:10A92000563C27B2B88072CC989F6F67CD3FC278F3
-:10A930001CF3F1F731E66A453B29A3C6A8C7325597
-:10A94000A31EF3CEC832E935A31ECB6934EAB16049
-:10A95000C4A8C7F2965698F49A518F8D89D69BF465
-:10A960009A518F8D5B779949AF19F5D8999B8D7A5C
-:10A970006C7CDCA8C7CE7E649549AF19F5D8393B0D
-:10A98000571BBE97F77418BE4F7AEE6E43B9AAF7FD
-:10A990000143FD730F3C64F83EB9EFFF18BE03A2FC
-:10A9A0005FC5F30C780F2D2EE2F91F3C69FCCE54E5
-:10A9B00007E6E35F8FE733611D2FE8FFADA13FD6C8
-:10A9C000C9CF2DC4E03F5CAF3FB308DD0300726C1C
-:10A9D0005F1EB4BB212E847A18EAA727DEC77D9BB1
-:10A9E0006B0322F9712B30D88AF4F0A8278EF4700B
-:10A9F000CD66E3F9876BE3C6720CE847C1B802D0B5
-:10AA00000FD2D7F5A6DF8D007B90E8ED7A456A4638
-:10AA1000BBD24C5F7FD6E92BA6BE8AE739F4F9EAB0
-:10AA2000F3B3EBE74F35FA5335FA63E22E82FBFAC4
-:10AA30003C917E7F479FAF0AFFF1EF1F39701E27C1
-:10AA4000760ACC8BFBFB2CB62FCF623E37ECDCE4D6
-:10AA500040FE34CFCB3C8F21766A81715F719AE8DA
-:10AA60000E11DFBD2E923EA229209F3DC6CFEBAD39
-:10AA70007A5EA47331C887E82F88B146C2CB0AC07A
-:10AA80000BDE1BAEDBADC7B476C71E14E97CF34802
-:10AA9000FCA868F870068CFC98A2A49AE8C988DF24
-:10AAA000B452237F5EFFCE450E945FFB00DF420D64
-:10AAB000639E90915FAF1797D13E9F8E6705FEC34F
-:10AAC0007125307571DE37C0BC7B94A1F85DBA6B1F
-:10AAD000D3DA3C0BBA1909BF8F1618F7E9F4FDB9A0
-:10AAE0003AC08EC322AF54C7DF2EBFFA24CAC76450
-:10AAF000FEF0EE02E3BEFA28FCE1DD89F2F61BF07F
-:10AB0000879F2F1856CFF5CF427FCAC9D2431D1653
-:10AB1000713F89C93D18AFB537F3B8DF60FCEE1B54
-:10AB20008FF3BC5B5045F7CE919E4B91F4384FE8C4
-:10AB30004004ED938CB342981735DA38C75F0A8624
-:10AB4000C439FE52307C9CE34D3C4FA866E436D8B5
-:10AB50009099A45029DDEF8C20F03CA44F118F4335
-:10AB6000F2758BB3B4FC6365D8FCE34BB4FDDDEA4E
-:10AB7000807A12E180FE3EC7E7C07D6C957EEA27B1
-:10AB80007D847E62F5DC5E8BD93C9D6DDC5EA37DB1
-:10AB9000A66F208E915E887EA99BE3BFCDC1E3B6F0
-:10ABA000A71B670B160EC17BB07018BCFFFDED1C18
-:10ABB0007E6E3504D6417972FAD6CF61EAE5F59911
-:10ABC000467F796D0587AB441BFFDBD9DC1F985CA2
-:10ABD000C8F94FCFBBC4BCC5940A28CFE4E794F4AE
-:10ABE00073AD7A3F930B3D54FFB340FDE4423FE623
-:10ABF000CDF2FB77D6661AEFE1F9B8A06E32CE6BD4
-:10AC000092D6FFE442C6F399C772B8CC79A77FD336
-:10AC1000EAFFADA09E9E788E16FD1287285AE27339
-:10AC20004A218F13E8F7DE4CD7CFCFDDC7CFD799B6
-:10AC3000EF5D003E79037F1FEAE89D76F2F7401F43
-:10AC4000D1F9B92579FC1CA2F93E8548A9BC0FC5EC
-:10AC5000EB095666792FCF903C8743B750FEDDCB8A
-:10AC600093992C0447CE7BB8BCD0783FC257384765
-:10AC70007765E128F21E166AE7E8FA52B91EEB0F73
-:10AC8000BAE20F59F8BB516D9DEED4FC5ADC9FC659
-:10AC90007D72BCDFDB6ABF3C5AC8E967B4E7AAEF44
-:10ACA000764422C8B7E673D5C9CE53F739FAD6E44D
-:10ACB00020BCE35908EDF79C05F29E1CA897DAA08A
-:10ACC000D0F9C7B5452CBD06BF97DB4278AE2373DC
-:10ACD000AEBCD68E7C5ACCB20428F7C5E6D0F87745
-:10ACE00036325904B8BA0AF93EFAC2DB3EA5F1FC85
-:10ACF000B5303585CE9D4F47FF2CD6C8E8DE42F3F0
-:10AD00003CEFD6F8C5B586DF9393516C9D877FB72E
-:10AD1000468F20B736215FD415B31DFCFC2C3FA70E
-:10AD200080D7D253FE662895F6052F8575E3FBE79D
-:10AD3000BDB47E3705A6DE8FEBA9F39B43CB533022
-:10AD40009F27EF2A3CBDF3E4A90BACE1FD9DB6DEE5
-:10AD50004DFEF0CF10DED4D24EFEFBA55F9E3A250D
-:10AD6000566B3FEDA860FB4804F55F0AE83F019F82
-:10AD70008A4CE768994BA0F3B02EA599E82AA5263E
-:10AD8000E4C5DF456357D918DEE332556BAF363281
-:10AD9000017F4F827201494E9B7E5F420DB5B742E3
-:10ADA000FB69B86F16C2BCEFD052ECAFC19D2A63ED
-:10ADB0007C33A5B8B90ED7EBD985BC8FBB939C97D4
-:10ADC000D0CFD90FDE3FB5EC95BDB509F70AACBDC4
-:10ADD000FA15E3FD5357BFF275EE9F3AB8F5EA57FF
-:10ADE000FE27EE15D0E51BA8213BDAF507447E8F40
-:10ADF000DE5F9FBAC28EEBB0B68E7523DE639F0313
-:10AE00009E5D8378B6D7879FDD8276C9AAF410FF4E
-:10AE10003D91D87710CE77D2988CEDF57C43819513
-:10AE200092BE9EDB2890FDC0A4FE1BB03C7F579ACB
-:10AE30008CFEC35F9F7AB32006F4F9F6EDC73D9808
-:10AE40009FFAAED4EF41B83EB8ED350FE2EFEDDB3F
-:10AE500044CA43A173DF0979625F6AF4B5604CF8B4
-:10AE600038D2D7C296FFAA4EB4CF58D44FFAFEDAE2
-:10AE700038409C68F73E9266F85DD1E5DD5E435947
-:10AE8000D7F3CB9DD6E7E62BC770B974EDA35D8EE3
-:10AE90003C05C78FD8C7C03C3FD0CE017DB0C3436F
-:10AEA00076BC0ECFA247CB1D680FBFBBCBC97A289B
-:10AEB0002ED86B676EAE3F30EF22C2871E02E7BE10
-:10AEC000DD790EE4B32502EB771273B37D88EF3F93
-:10AED00069FE9F791E4BDE961DB8BE4BEA583F9E19
-:10AEE0003B5B7493B0F666A8BF28E226BFDF3C4FF9
-:10AEF000B3BEB906EFB311ACEE816BDEF73BE8E70A
-:10AF00002AE807EDCF259DC6EFC79EBB71DF161857
-:10AF100077C74E07D98BD78C10EF1F3F46D34BD541
-:10AF2000ECDC53E348FF654C5092DB1DBA3EFAA0BF
-:10AF3000855192CA5FF0F77DE1F9518B4CCFE385E3
-:10AF40000AADC7F53BF7ECA3DF16967AAB51DECD21
-:10AF50007C7E71DAB7D8605E517557DB335B88153C
-:10AF6000F47CD51E8AEFD568F7BF5CA39DFFA83A95
-:10AF700060CE57DDF3ECEFD06E83F99FCEBD3D0B75
-:10AF800046796FCFB1E7A6A6D1F9001D2FE7025E83
-:10AF9000C4AF8F9764ED9627F9DD169D9F8E6B7A6F
-:10AFA000F7AA6DB3D7E6C2F86D4FFDB910E3C7310C
-:10AFB000C6E9BBEA41FEFB3F55EE6CA23717D267EC
-:10AFC00010F16ABAE721C6DE6009F47DCDAE34A285
-:10AFD0009300D843CE1A7CC3E9B50AEFED44FA7E5C
-:10AFE0009DB77769FE6D64D7EDBCFEEF1CB23340B0
-:10AFF0007C19B0D1B32760ABB1B867CB7CBF58A781
-:10B00000B1FC89BDAF10E5CA35263FF413C13A3F04
-:10B01000EDCA3163497E5DA5A8D3310F60090BAF3E
-:10B02000E5F15B7E6FCF0752E7BEEF23BF6F13588A
-:10B030000CF0B4FC378FFD2BCAB1EB1EBF2F1DE502
-:10B04000D8875267368EB76CFB9A74BC5FE60329CB
-:10B05000968EED3F8C737936445F8E11B47D293521
-:10B060005D00997C03911AFCFFAAFEB5B7C2387F38
-:10B07000033C23DFDFB0E31F54DEA7BAFA5900FB1D
-:10B08000ED9B8E705CDBE46E6E0DA17F69E4CFEB0F
-:10B090007E765FB642791EB13C0D7F79D8EE866D23
-:10B0A00076CAF3453F1E8759C1FA697EE6F62BBA88
-:10B0B0008F3A505ECB36D69F7FFED0EF602139901D
-:10B0C000DF56ECD8F0A9988ECF0FDFC2DF835A612C
-:10B0D000B24F976AF2DB4CFFBF30D13DE087E20B05
-:10B0E00031808BFF1C1397E36D3FBF7FE26180EFE0
-:10B0F000A36D2FA6E3EF4DE8F4AFDFF37CAC7BF15B
-:10B1000042C730F7087DA2F1C9807ED0F493B21314
-:10B1100000CB81E22EFE5C66EF493F1FE6BBACCB65
-:10B120001E429A5FF698A8BAD1AE3AE8247B64D959
-:10B1300063C7896E97096ABF407A8EA5A31CD7D7CB
-:10B14000EBFAC7FE341DE5F4F54191CD0456BCEE93
-:10B150005727787DA0F314A87FFD1387A77F1FCB07
-:10B16000204F5C16EB35B57B8FA3CF6DB15EDD87CD
-:10B17000A7637CBEEDE77FA7F5F870B7C0728A863B
-:10B18000B65FDAF5278A837D040BE3CDE4F8427DD0
-:10B19000B3A25B6C726458AD5FCFACDF56D277CA96
-:10B1A0000B1F691D378C615C3FFEE6B15FFE16E048
-:10B1B00058FA96333413C7FDE58DE90CE8E0CF5219
-:10B1C00033A7FB1FAFC946FDBDD41ECB96E9C9DF2F
-:10B1D0002FDDFA5DA2C76B7EFFDD6C6DBF2168239A
-:10B1E00079100BE23C973C388FE679358B103D2E79
-:10B1F000FD31BF67F104F8D9567E42A5C2E59693AA
-:10B20000AD9C78AB0FE526DED902703818BFAFEBE6
-:10B21000559EFFEE64976524DAB90E85DB7331160F
-:10B220007F07EDCE15A09651AE89BF3F311DFBB90A
-:10B23000A9486A76527CD4FAFE9AFF075C96D1033D
-:10B2400000800000000000001F8B080000000000CC
-:10B25000000BE57D0B741445D670F5F4BC425E43DB
-:10B260001E100884CE3B488803492001D481400C3D
-:10B27000CA63025151220C014380BC445670F5DB75
-:10B28000740820B0AC06659515740704C5E706047C
-:10B290008135C2441483EEC128AC8B2F761004791B
-:10B2A000C980B08EFFB2F2DF7BAB3BE99E2402BBCC
-:10B2B0007EE7EC7FFEEC598BDB555D5D75DF75AB92
-:10B2C000EA4E1583BF04C6F23E1ED5DD9BCE98859F
-:10B2D0005D30DF9BC5D845C6A467EC8C5531A3EC27
-:10B2E000B532FABB12CFD889F5962EC28D5076634F
-:10B2F000650DD0FE0AFEDDD2564E9704C6B2A9F9FE
-:10B30000276C106395F82F09FAD974227F0DF4CBBE
-:10B310006244161EC3E167A218B395845487E7C040
-:10B32000F70E1E35F7847A39CAC0926D50DFF20DE0
-:10B33000C1CC1E2D617BB5FFAA1D16E651C703FFC8
-:10B34000AFDAF08D99613F06E6EB35B47D3D63D50C
-:10B3500019BF8EC279844BCBA13C61F6E5BF85DF76
-:10B3600081EF6E84EF94AE82F6699AFEB69EFC9CE5
-:10B3700065607B73DBF378FCEF423E2FB138DC1560
-:10B38000C2D84C9826CB6D3FFF055FD63EFAAEA6DD
-:10B39000BF0C2934EA7830FC63301B7C456C7B9F02
-:10B3A000AD8D66AC47FBF77FA8911F7DD7846FCB2F
-:10B3B0008C41937293FB05C453F96716BB0C782C30
-:10B3C0007FED92D9003013982FB92B63A75FDDF37F
-:10B3D000E93D309FD30DA6A831F4554798D0AD0D67
-:10B3E000EF655BBEC95F03ED4D80F720A067E5D632
-:10B3F0001FCC06681F93C77C1618FFE9282763FD3A
-:10B40000116FA6AFBD1ABCE5C1736F088D23D610AE
-:10B4100083A52796415919C5EC1E78BFF2A06897FD
-:10B42000105FCCB7C416D2FEFDAA86A30174D1D793
-:10B4300033E6333BF1BB5B7F7B5E0CD3E2DDF8B5DB
-:10B4400057837715CF8178BD3B00AF97587A387C0A
-:10B45000869D7A794E1F577A7BFCAA78FDAE8621AD
-:10B4600093B73EBFD047223C4B3BE043DDA1AE51FA
-:10B470002919FB9469F038FB95B3C4BFFFE821326A
-:10B4800011F8A672C38F4B90AF00AD3E0BF06FA5C5
-:10B49000FB3CC18B1D561F23B8A948C8E868DE7A5B
-:10B4A0007C06D6F742A466B7D1DFB490C9A1D0AF6D
-:10B4B000EF6DD1BD1E86764EF28545C0FC1607B1F4
-:10B4C000A94E28CFD914B8AB0AB3A9D3609CE7E43E
-:10B4D0000C9B8CEF05B1490D409F734E5F58D79080
-:10B4E000B6791F6914C32468EF75B3828690F67C21
-:10B4F000C8581D7DDFCB3AABAFA5718E122FBFEEC2
-:10B5000085EF5D908DCC02DFF3D6FEF0BA17CA63EB
-:10B5100046AB0DF134A3F6AE306680EF37268E9F32
-:10B5200004EDEEDB07F8A3E939CC3D00BFD3F9D435
-:10B53000D9B74C7E6A18CC4F0CCDDAFB16BC5F0A2B
-:10B540008815815F67ACD0E3673673867BE2516E06
-:10B550004D6D7C42FF759B3DF0DE4C5748F572F80F
-:10B560006ED95A7DFDECC6D3C45FB303F8CB85FC1E
-:10B57000D5A33D7F6D54F96B001B80FC354A0C311F
-:10B58000203F9F6B16DD1678E7C222135B02F08521
-:10B59000570537837E2E34422384777098C9D1C4EF
-:10B5A000B72A9FAB783B83FC97DA1E9FADF5DBBED5
-:10B5B0001AF43034297FF38B8C35509E79F3B39491
-:10B5C000B710DEFEB7B82F58FBF679BB7E9C42E37E
-:10B5D000DA656138AE73BBDE8F7B18E13F5BECC888
-:10B5E000B7E7165A1C0CF5DDAE507732D6F7067E5B
-:10B5F00000BAD7BDFD4306EA7BC616111D5B243396
-:10B6000095171AFF7958C079345A249C47D52E4093
-:10B6100002BC5FF5E72037C3F7DFFE61902BE497AC
-:10B620009B4FA599B9883F43D9A42DC8BF5D990305
-:10B63000E753F556EEF3B5F0FD8AAD4DE6E9509FC0
-:10B64000B7FB5F19A88FCE6D6932A3BEFACEE47D39
-:10B650008E017F7C214DAE37019EBF0B85CE7A32A5
-:10B66000362F7E8D530EE9082F1C0FE7000F382F61
-:10B67000C04B993BBD737C5CF8AFC5C7F929F8FD99
-:10B68000F2C6C14C8CD7E24570F0E7A16EAB40F337
-:10B69000E7CF77FD90C142AE3E5F5BBC99E4FDFF12
-:10B6A00097F966C4FFB7D297F3FB9B12B74B817C27
-:10B6B000DF9EAFB73F48F0EBA1761AEF35CAFBB873
-:10B6C000FFDAF9FFEFD0BBFCBF76BE57A3F73E858C
-:10B6D000DEA1360BEAADB7FF15C7AE63DEBFFD7F57
-:10B6E00074DEADFE8FC16ECD82F17DCEDC770C179E
-:10B6F000C82BE9D01FD9112F507BA6AC3BC6297EA1
-:10B70000451DFB7AE434F8AE0CFE04FAFB75215FAC
-:10B710001B0F02DC027E02FA170C9D13C0434BD1B3
-:10B7200000F772B4DBC66A6603D8F4E97482279521
-:10B73000FC68CC82F677809F87EDF7D77A67D44292
-:10B74000FDFEAE06A90EE0F18E89C95B01B6F514C7
-:10B750006DB88EA973645A25CDF8C6E7E8D723F7EC
-:10B7600004AC2BEE9AA4AFBF93AD8F36427F779691
-:10B7700099981BA6744740FBA7E26D34CFBB58F5E0
-:10B78000625BC8F5E3E9783C5F9FD5B181CD12E2F9
-:10B79000C521DA37B2F678638837C44B4C265B6E26
-:10B7A000C7AF788D0701B628FE15FC913CDE116508
-:10B7B0007D01F1646173D983D0DF25C9588DED2DEA
-:10B7C0000CD68D7CDCC215A13DDEE04F320E225737
-:10B7D0009C4830DEF100433CE3F33E31BAF769DECA
-:10B7E0008178BE7EBC2E4C7E0AF15A146A77235FA4
-:10B7F000389E8F36C2F7EA00CF82D0864F154F8130
-:10B80000787F0B7943E397AB653AF34D41BF338CB7
-:10B8100085D99743FF61D65ECCC8E7E1B3F4C0C2D7
-:10B82000C670BD268E600DCB61BDC6728C675AE7AF
-:10B830009540F59E87E1BDBAFBE17DC46B2F2639AB
-:10B8400089FF8B6DC7FBE132CFC5AE04B7F99F1FEF
-:10B85000E580FF194F25F1ED471BB8BF7969D81B6B
-:10B860004B0680283198B33C08FD5CE54FF616E3A3
-:10B870007B2233D871FDCB1C0EC93608FB65B4AEF4
-:10B8800009CF31E8D6BF5D1D5D74788B2C88D0C19F
-:10B89000D1CE9EBAF6DD2725E8EA7BB86ED0D5C7B3
-:10B8A000960DD4C1BDAB87E8DAF759304207C7CB54
-:10B8B000B7E9DA272E9DA08393EBEFD1B54F5D5DFD
-:10B8C000A2ABEFEB9EADABEFB769AE0EEEDFF06B68
-:10B8D0005DFB1B772CD4D50FF02CD7D567363FA155
-:10B8E00083B35B9ED1B51F7C68BDAE3ED7FBB2AEC5
-:10B8F0007EE8B75B74F04DBE3FEBDADFE27F4707CF
-:10B900000F671FEADAE7590FE8E051B62F74ED6FC1
-:10B910008D391A10EFB0C90F64A11A037E02391BCA
-:10B920002D9DD6B587155A31F28D49E187DBD3BEFF
-:10B93000D7D58FB5FF53D79F9955031190ADEAA97D
-:10B94000ECC21AA80C612D543ED4DF757B02CAC329
-:10B9500073F21264AAFDB93FC4A11DF968D803327D
-:10B96000F2DDA518661307C07898CF887C6D08BEF5
-:10B97000DCCBA5891B85F945E6C9043EF40B54DAF6
-:10B98000FCC1CC13097CE80FA232C21F49CF23FDB2
-:10B990005DA98CF2C7D2F3687F0F2ABBF913A9EC1B
-:10B9A000EE8FA732C6DF8FCA1EFEBE54F6F467D2F2
-:10B9B0007BB1FE0154F6F20FA5E7BDFDB954C6F9FF
-:10B9C000F3E8791FFF702A25FFED54C6FB47539912
-:10B9D000E09F48ED12FD855426F927D3F364FFDD7F
-:10B9E00054A6F8A75399EA9F46659A7F0E957DFD68
-:10B9F000B3A8BCC1FF00BDD7CF7F3F95E9FE87E963
-:10BA0000797FFF435466F8EBA8BCD15F4BA5DDFFFF
-:10BA10005B6A37C0BF8CCA81FE27E979A67F25956E
-:10BA200059FE35F43CDBFF072A07F99FA772B07F68
-:10BA30001D9539FE57A8CCF5BF44E510FF1BF4DE79
-:10BA400050FF662A87F9DFA2E737F9775279B37F8B
-:10BA50000F3DBFC5DF44A5C3FF213D1FEEDF47E516
-:10BA600008FF017A9EE7FF98CA91FE2FE8F928FFA8
-:10BA70006754E6FB8F5279ABFF089505FED3548ED1
-:10BA8000F69FA4F236FFF7F4DEEDFEF3548EF1FFDD
-:10BA9000939E8FF5FF48656B3C619829402FB6EA6D
-:10BAA0003FC3152859484487F1B6D6F7157DBC32F7
-:10BAB000F83986718F71D502ADD39F0EFEEE5DD23F
-:10BAC00093B91609E1C5D8B407FF8EAD1B63F7E241
-:10BAD0003F24C69A722DB47EDFFF3FFCBD25C38F85
-:10BAE0007EF900DAC7FB2D0CED63A0FE55BFFB51BC
-:10BAF000CE9E68F4C3960CF49663FCE577F1DE62A3
-:10BB00002CB727707FE4F5046E6FB72518A87CBCAE
-:10BB1000BF8DCAE2FB93C3294E15756DF3BAA4D845
-:10BB20007DB5FD1F921438C41747F6E21AFBB9D64B
-:10BB3000768BADBFF923C6751C7546167433C046A7
-:10BB40006EEFE52F43DD1B614AF288EA1731CE2301
-:10BB50002FB4D8EAA210CFBFF913B65FC098D302B2
-:10BB6000E53309AEFDA8177E088A73837184BFEAA6
-:10BB7000C113427FD1FE3FFF5FEEFFF8CFF5FF77A5
-:10BB8000858F6E4D749E4A40BFC0E8C8403A8C58BD
-:10BB9000D8438C82F7A7AD106CC847D3170DC847A0
-:10BBA000FE18C81C1427BD37924D7576E0974524C2
-:10BBB0001A14FF4232DF05E339CB9807FD89128959
-:10BBC000115F96340A6E99E2D08EB0B160BFCB148B
-:10BBD000BE2D595A6B9E0FED2A7AF0781973F378BF
-:10BBE0009915FE877234A77EDD5E0A378A97293E53
-:10BBF0007609FD5E609D399BDAC763E7639C7987B0
-:10BC0000D98676A3A221209E1B10370B8C9705277F
-:10BC10008646A1BC323BB3F3387748E9DFF07B2C92
-:10BC20004C12A3AE8E17353E2B31A93BE27194988E
-:10BC30001E8EEB980BCDC9E10C4B49EA8EED5C40B2
-:10BC40008B162805A36B303E077CCA48575F6DB042
-:10BC50007B3D8CEB08D813291385DB35D88CF1C8D4
-:10BC6000CF7BB3E502518DFCB0AA0D22F9F5DE853C
-:10BC7000FF5C8271EC59F1465A074CC3983B8E6FBA
-:10BC80006757B72C50BF8477DF6B02C55D653637C9
-:10BC900006E3BA9AFD10F26B9D8BA3C7E5209D9633
-:10BCA000761D68415AC98E4F93BA69E8B3A88EF0E1
-:10BCB0005A1213C9E9B3C3447E2DD0A716E933CB7A
-:10BCC0006D3AA6C5F32576D98CFB31254BCF13BD34
-:10BCD00066B7D14BD7AEA2BE89E80A74D23DAFAAEF
-:10BCE0003EA1C6D18FFD1CBD86272AF14D855E1869
-:10BCF0003FBF0B2B1F8924FD50BCD0935CADE1D31B
-:10BD0000C07D89A41943C29D200F053D393D98D1BE
-:10BD1000DE0DE9F9FD8A6CA257209D0A7E9A4EF449
-:10BD2000609F87B28D309E7B13D9D409F07CAA1214
-:10BD30007FBDB76E7401C6CBEF4EE4FAF223587F95
-:10BD40003A60FDF9718D953940351FA8B111FCD7C6
-:10BD50009A1882FF562351F9594D1A95C7CCACACAD
-:10BD600041235FC000661CDF5445AEA626AAFB52E5
-:10BD7000F36230EE5EF0D3816C03AA50B9A170D4A7
-:10BD80004DB8BE002468F033A928987C6915F69A4E
-:10BD90006CF931A83F9609F68D4857E7505D7B96C0
-:10BDA00096D906A3FD32727E02BE588FFC77F798B3
-:10BDB000485DFB3B97C6EAE0F989128DAFB0205190
-:10BDC000F7FC9EE27E3A789A1FD6F3F0A924A9C028
-:10BDD0002043FF17FF62227EBE583DB8FB7C0E1346
-:10BDE000DF05E2FF9859A63882BCDE6247FDF76D99
-:10BDF00010E7EF6FFF2ABAEB68DD2B53DCE592D535
-:10BE000026E13AE5C1E9721CD63F180C2EF900C4B0
-:10BE100097C8307EC05EB690FE9CBE5A6032CA881B
-:10BE20008FD17A79DE4B169AE78CD5227365129FF3
-:10BE3000C461FB79D112F5776FA2D480FCECDB688A
-:10BE4000B1AF87DAE95EE57D6120ED8354CCFDDB9F
-:10BE50006123CA434A4B06C6F78BE33DD1A807CFFF
-:10BE60006C30D1BE5785B8AE34044834E7776F8460
-:10BE7000E54A247E84DF531F47AFC3F9B7CDD74DC2
-:10BE800071116F1FE7B38980CF53A5EE0C5A273F7E
-:10BE9000C2E3F1EDF1C2484FC986306923CE77BACB
-:10BEA0006BB02D5D6B0FF9BEDF7493BD9B3D1DB96B
-:10BEB0003FAB07EA81632B4C05187701BD3F0EF1BC
-:10BEC00074AC3ED2B09C16555B88BF4A8C9259FB2D
-:10BED000DD9215A283DA837E2F447BBD5274B1C1FB
-:10BEE00008D753FFF252C185FB4E492CA73BF2ED18
-:10BEF00003F70FEE8EF398D2C93EE37720332ECDB1
-:10BF00003ED6ECB745A71BBF97E53516F5D78E9FF4
-:10BF1000C781925C4B7BCD453A6D0EB22F9750AFE7
-:10BF20002686E33AF5E441B01BF08D59754D1912A0
-:10BF3000B05EF903DB890E65E31A523CF0FC63AB9B
-:10BF4000EBFD4498C2B73D1A9E1A8A71A2C6E7E378
-:10BF500064B4830BF8FEDAEC9767F5D1FAF3EDFDE4
-:10BF6000091663C8C1C2D34D00BCB824968FF89D92
-:10BF7000CC1A94F8859BC627A1D2057CD8CAF9FEB5
-:10BF8000DB74837DCA812C447FA80DE9A2F677D4A7
-:10BF9000C4E35C9F270A3A3B1C9DC4E57BBA81CB76
-:10BFA0001DDB25109F02C13E4DD2D8CB2AB682ECB4
-:10BFB000654CACC870DFEE646284A217B8FD9B8349
-:10BFC000F60FF7856D02C947F9268BDB0DFC9598B6
-:10BFD000C4E573B6F9B5A70662F3F86A337E67D68F
-:10BFE00056813D034D4F99DCA52DB82F655BB728D1
-:10BFF00082DE33D9DDC8A78A7EB7824240BD3013C6
-:10C00000FF09F515AB04B787F8C549766806C64D34
-:10C0100070FD8F7A5EA347DAE9F700BD7E1FD3DBA0
-:10C020002356AFB72FCEE0502B8E73F62AEED7B63D
-:10C030008D4764570057A52EF7DE71345E81E222EA
-:10C0400081DF9F89E3C3F1C2F83CF6EB1F4FA99D46
-:10C05000CB6979BDE07677303E15AFE1C39884F6C1
-:10C0600079CE06C18DFC382AEA7EC2EF6CC06F24FF
-:10C07000E2557686DD05702930929BE22B1CFF5538
-:10C080006B39FE81CE9F68EDEE37513E33E2F51BF2
-:10C09000B09F32EE0756FF4074DF0BF445F99DB5B3
-:10C0A000D96DC68DC8D3AC3E2C04F97EF5C77B7123
-:10C0B00059F0CDAA37BAE1FAB538C2936C00BD1574
-:10C0C00029473C5170531BFF05DAEB767639003F68
-:10C0D0003273921D6A8727EB8A16DCF76E473F257D
-:10C0E0002E761FFE0BF073DF06D11194A16BA79C77
-:10C0F000479089FFCB641FF9096530CF3A1B3E9505
-:10C10000F3112FF7D919E9DDEB1D6FE03899584C81
-:10C11000FC89713DF443FEDDF106FA1F85493FEFCE
-:10C120007F04EA9140FFE34B93C3B010FDBE8FF94B
-:10C13000BEF845A3A737CAEFC5A8043BB468D3A38C
-:10C14000D103BBA39E57F568A962B7D47EEF437BAA
-:10C1500005F0F1D56F8421DD55FACF443B91DE66C1
-:10C16000271E9C0EFDC3F71EDC1E44FD9F1D0B7693
-:10C170000AFA2C7EF6FD30A6D17F0BFBB82A92502E
-:10C180009FA8764D5C176703FE52F5E5D5D65D9DF9
-:10C19000CE2B24605EA1FA7995E0BC32DBFA9BAE2F
-:10C1A000CCEBEBA57C3E4757F0F9CD68372F6EF707
-:10C1B0001F7CDE6297C92FF044A31C7EBB596475B7
-:10C1C000445FEE375CB2023F0DC0F8CD0AB2EB27F8
-:10C1D000A39984719D4EEDF74A0BF905B3B6F1FDB5
-:10C1E000D653C2F0EEB4F1FFAE27EC2194EB2D2232
-:10C1F000433BD4369E56BBBD2A295A63B7AF116F55
-:10C200001867457B5609A843BEAF6CECCEF09CCBBB
-:10C210008AE1AC41A47D782FE93160218A4F831FE8
-:10C22000AE8B375898DD6A453A75127FFD47F2F9B3
-:10C230002973091FBE14C4BFFAFDAA2E1E5377F43A
-:10C240006B360BE4D754CC1B1E369CE17778DC6C44
-:10C250004B12B753DB143D2738AA292E063E8DED2D
-:10C26000711CD75A1E1F66EFB006C42FC2143F368A
-:10C27000F07908928D150FE471792BDAB51003D996
-:10C28000B5403C7CAD7CA7423490FF5B6EE67EF00F
-:10C2900039819FFF7847B18FEF24717FF8FD241E0D
-:10C2A0008738877E20F47BEE268BBB5640B7D54877
-:10C2B000EB64E3308B1BFD19A335C42366207A8D14
-:10C2C000DFB5CA33E06B0A6B31213DC7E5DCBF093E
-:10C2D000E773B827B3895DA9DA89FB08934933303E
-:10C2E000B6DFF4E57B188F94A1AD086B85C93927BB
-:10C2F0007A63FBB508C3FC0F0735BC877196C3F1A1
-:10C300004686FB02F2DB16B2FFA611DEDE14A7ECB6
-:10C31000C258DD008CC7EC598C7CB4372632CD0670
-:10C32000EDA71ABBD845AE7F469EC7F196097CFFA4
-:10C330006691371BE973235B643B6EA5AD85AD57F2
-:10C34000227F8E7F8CECB8CA0730A6F211F08F21C5
-:10C350008C33560EE15307035E09FE2169DE8455D6
-:10C36000BD70D344EA8F742E4FF019713FC527304A
-:10C37000DF7AC0C31D393EA303E9E5600DE3817F89
-:10C380003DFB9880DF4111C0EFDEE54918857860FC
-:10C3900069120B87FAF14689E05E052C4254F60DCE
-:10C3A000308E7568A8407430582513CEDB59200CA8
-:10C3B000C47DD1F285D736CEA08DBF99B06A18C0A2
-:10C3C00006035FCF3EC4D7B393E523A3C84F1AC675
-:10C3D00004E4C3AA880613ADA3415E70FC03A01B4E
-:10C3E0002DFE261BBD7C7C6530BE5C948B24E2E375
-:10C3F0007BAA05F227ABCC1DC735A293D57D399B0F
-:10C4000084EDE7C0BF90AFE7346E4FC6EFAD103894
-:10C410001FCC51F9EC55BD5C0E4E66C4A79DF1755D
-:10C4200096D27F56B2819FE36AFD5E03D9DD398DD6
-:10C43000EF1FC2756567FD57589887F0F2B685E221
-:10C440000782C19744744144021D26A33F092EE28E
-:10C45000C064EE27AAFC598AFE4722963C2E620051
-:10C46000E589F6B0ACFE7933222DF0FC11383E742C
-:10C470000E68F686C0E79AB88AA8D33B14F714CCA6
-:10C48000BE19381EE1E6203BEAE3C9E6065A9707E3
-:10C49000B633D5733FCBB494FB59B4AF06B0650542
-:10C4A000F73327F7F2F567A4E76CF9423C6BF58B9D
-:10C4B0004BF9A7E179B9CE2FB6601C01E35EABB9A9
-:10C4C0003F6854FCD792157A7F61F2228DBF48DD18
-:10C4D000FA2A70BCA6478229EE62417F42E307FC3C
-:10C4E000DD5028A31E96138C74FED2C402FD0927CA
-:10C4F000E3F14CFEDCA8F88923934DBA7D3779042B
-:10C500004B433C14A31E4A4455E35C8AF1BC0B2CFC
-:10C51000B41EE366A3C44728FE575CCBCFA505C66F
-:10C52000FF2E54BFF72CB6C77A7C3EBFCB4F71B8F5
-:10C53000BF09CB52A77033C87797C3975C281FA059
-:10C54000A84C28EF41FBBF41583084332107BFEF8F
-:10C550007916FB97CD561BEAADA783C3A89F050BA1
-:10C56000048A0F2FB27179FBEACBD0F5A8A7D47853
-:10C57000EF92E199ABF1DCD26F92774FB0F646F5CE
-:10C58000C0E8DC1218C64F1C309FA2CB203704BF76
-:10C5900037C1110E7CFE9E6F8A15F0B46AE37B13DF
-:10C5A0008CC08FE77EEF7B0EE11736EEE7F0EF7C75
-:10C5B000714108271F986004393A57ABF6776082BB
-:10C5C00003F7DDFFC0E13AA897012E46FD86F31E72
-:10C5D00022D0BA7F23DAA5E8B6784FB1E11D5E8E8E
-:10C5E000601EB49F576BF7A764E746B4D762E8B103
-:10C5F00050F42FB6A63A08DE92E87C2C19FDA083F1
-:10C60000EE6ED118C732B016A40BD8314747FBD213
-:10C610001B93B8FC6E4EE1FDA9F8827E9E4E8EBE45
-:10C62000FE7E6E69DF8FFBDF194F9754E8275BD7DB
-:10C63000CF4BFF4E3FE501FDA87E1B38C012EAA993
-:10C64000D3698E77719E737EE318B115F5CF7E9115
-:10C65000F8F4FBEAED2968F7BF7FD51289F66FCEB3
-:10C66000EB3BE34A318EA0F845A79B3E334BF07E6F
-:10C67000A55F640ED0D3557E81CACAAD4DE6FC7469
-:10C680003C57DB64CED38CAB5C192770BA7182C681
-:10C690008FD997ACC69F57D278E7BC7ED288F49CDE
-:10C6A0006368388EE78FD9101EF70A9CDF16E5BD48
-:10C6B000C378DEA08338C047C9DCEF88E9E7D88FAC
-:10C6C000F3DB8CFA1CF9C5C0CF8704B6EF9EC2FB22
-:10C6D0002BEEC2F57CF6417BE9015AF76518442838
-:10C6E000071DAA3697C0F30389230E25771887F410
-:10C6F000F13864238F431647B4CC0363C622522E0D
-:10C700003C81F276FBD3AA7C80E8817E29B0A870B8
-:10C71000D0C491C3789C0BE14B1B0D4FE239C2E6AC
-:10C720002E2DBF3A80F66159285B0F7276EFE0D06C
-:10C73000B82D308EE972B800B6930DB784A64C833D
-:10C740007627128647A4F0F327E41F9E48709EC503
-:10C75000F179E3830DE08C309799C7B35C1F88149F
-:10C76000CF726504BBDC1DE0EBB482CF8814EE9F72
-:10C77000351B609C03711CFC7C2FFCC56DC178D3FC
-:10C78000C23E02F29DFAFD5B1387774DC96EFBFE38
-:10C79000AD89CE9F92A3B5EDC319B6BFD671FC5338
-:10C7A000B1A75D5338BD9CC380BF347A7FC2C860D7
-:10C7B0001D5C34269239B4F1CDA2581D3CA93851E4
-:10C7C000D7FE9E19FD74F5632D2D59D5D7E1EF8B5A
-:10C7D0006169E1B4FECFE6EB90AF1A2F7D3A19FD07
-:10C7E000D80DA25D8079CD7A7BE3A743A97789E252
-:10C7F0005CA79A45B247E0DE9AB5FB2767590B9DC7
-:10C800003B36765D44F66F4E0C3FDF3DCBADDFFF30
-:10C8100050E3F21DED9BA03D2BC773311DED9BB482
-:10C82000C5E37F76FF243345590F0F6403F97AF887
-:10C83000CC5E9829CBDBD144F4AADB27DA9155EB07
-:10C840007A0B4C8071DEBAD5E20E82719FDD79C41D
-:10C850002C69F64FAAFC600022F1BD23663C4F759F
-:10C860002099EBEDCAC6F366867CD1783FC9754B3B
-:10C87000932B2A1AED17F8ABDBB290BF1AB2D0FE99
-:10C88000351B6C4EDC0F9BB37434C599C3FD93A963
-:10C890002CAF1F4DFD56F827125CE90F26F823B187
-:10C8A00065EBC7D8CFD3E136B4E71546F955A44BAD
-:10C8B00085149C89FB55955B3FBEF86BB4A3367E0F
-:10C8C000AF63ACF84916D68FED6333D475C5F10666
-:10C8D000513F2D23BEC842BB5480EB02785EBE257B
-:10C8E000D785723FBC2ED486722FE279B20EF874CF
-:10C8F0006A0AD72F262F1FEF287F21F5D7BABE4F00
-:10C9000049A0F9ABB0297A8311F5873A0F13187C47
-:10C910002C6FF3F7A3B26A6BA111CFC57F90F67CA1
-:10C9200014E209DA876099347228E999EFAB078736
-:10C93000B30EF4965A5A143D3C19F530F45794E668
-:10C94000F835CAE5B847BC462BEAD110AB0DF73F26
-:10C95000C6E50C904A35F311DFB91B5712E0ABF86E
-:10C960004CE8074C8652ABB7A776625FE41483E2CB
-:10C9700017D5F2739DAA7E5FF504C375D8147E5651
-:10C98000AB55AE2A94F6EAFB2D02F707E46D3CAEF8
-:10C990005F91E67A12C7DB329C4DDA42FAB425AEDB
-:10C9A00030F4971B7F98B185E81C66930CB8AFA054
-:10C9B000D6AF6E9D0797EFABCD63B1D2FE23912D1D
-:10C9C00040BEF8E8965B5A1CD06FD3C39999A2C6B3
-:10C9D0004EBD94C2CF35339BEF32E98B5DC112EA75
-:10C9E00081B1B8F790D5E6F7E379488C6B54EDB296
-:10C9F000ACC7F3605561B0CE87EF8FE9E77A09F1F4
-:10CA0000D1B43BF722DEA371E0C20CE4DCD138F8EC
-:10CA1000229EB3775841DBD8D10F72BC4CFABF933A
-:10CA2000F15E4D9F258D9C1385FEC4F73024B4B76D
-:10CA300060F7B30E72D889F8722DE5F2E752E47010
-:10CA40009AC2BF258A1C4E3372399CBA2ADC86F101
-:10CA5000CE924784FE785E8E49A176540126E4CBBF
-:10CA60004CE44FCE97E5FEAE8A3CC72BFD70FE0F1F
-:10CA700094CF4A7F24B553E5F4E534D7216EE75AC5
-:10CA8000B216C0B86E03B946BDE75AD8230BE5A469
-:10CA90008D4FCC36E427E09398520D1FD435FD68B6
-:10CAA000443E310D13884F2C50E669F8C8D9EA9FEF
-:10CAB000D8F2BBA15FB528DEB09CB5D57F95A2FAB0
-:10CAC00029D7C6EF1F28ED4B42C08FA0F84F18C3DF
-:10CAD000F8DA852889E2A47397C1200105734D9E79
-:10CAE000648CC3CCBD3F88E260A507AB97844AED58
-:10CAF000E975B73F83F69727FA93A83C90E83A8DFB
-:10CB0000F898E6BF53C163C635EDCF653B78DCCD01
-:10CB1000E4B6D8D7C563DCCD25D27E5C6F667B9248
-:10CB2000EC94BA1FC7E36E18CFC3F85EE0FE1AC6D6
-:10CB3000E1703D6D8932E8F609DBC5E386EBF7D39A
-:10CB4000CA9B3E196480FA53F10E8ACB79FBB88CEC
-:10CB5000A9308FD913DCAF9BB4FB6C0A1E1B8C9ED3
-:10CB600064B4A30DD51C3F0D2BC402DA6F622CB840
-:10CB700050735EF76A7C3CDB9F48F851ED8BAAB797
-:10CB8000B7D7D0A1CF56FD7D35BB53A1F07B05F2C1
-:10CB9000BBBDBD9D51F935909F55FD6C8A3E487ACD
-:10CBA000E8367805FD07555F17E40D1D86767EE8AB
-:10CBB0004B895BFF0CF38F4C7365A502FFDCF24AD7
-:10CBC000EFAC3500DF66741B6D21D7A20F7F349167
-:10CBD0003E7CA490913E8452AB0F4D9DF8E1B9A9E3
-:10CBE000D7A7CF5395F6E0C772FF10F4B5B6BF8A4A
-:10CBF000B4116370FC85A9DC4EFE52E3EE4C8F1736
-:10CC0000A6AAF2796D7AFC66A5FDD5F4F88C54AE2F
-:10CC1000C703F5366863D2DBE7DEEE4B71B2C30CB7
-:10CC2000F43CDAB3C6606963BCE69C7B9770B75688
-:10CC3000AFC7F49B3E03F9FD1AF4FA7D88BF7F5716
-:10CC4000AFE7176E26BF0AFE9CE36F86F5C76F61DC
-:10CC50007D87F047B0BE8B6F2F0F817210C8F7B081
-:10CC60001ED9FA318CAFF9A93E1477003920BEAF36
-:10CC700000BE473950E5A572EB8070DC37607F114C
-:10CC800019EAFF403928C87BC588712AD4E388AFE8
-:10CC90003D20F3A86702ED843FD5B50AE7AFCA830C
-:10CCA0002A0757E7A39D265C979ACACF733D0FA525
-:10CCB00056CF77E6CFFCE13AF9FFD1D46BF3035EB0
-:10CCC0004DE5F7207E41FE7935F5DAFC82D752FF3B
-:10CCD00023BFE02DE21FD49FB87EBBFD437BF87CD1
-:10CCE000CE3F742E11F8210BE3CECD837ADB314E8B
-:10CCF00073FB15EED7834E27BF3ED0AF9EACE8BF87
-:10CD0000A94A9CE0409AB32595CB2BF9EDC3138338
-:10CD100007A0BDBA567F6F725435C338D35428B5B7
-:10CD20007AC28274EBC05FFF6BEAF5D9EF3DD7485A
-:10CD3000DFE3A9FFB19FE7BB167D90E4B04E447CD2
-:10CD40007EEF3132C4D3D5D603A6D51CCF2ABCD8AA
-:10CD50006354ED6624DA4DE08FF3FF097F8CCD6BD1
-:10CD6000B86805BA86A7198B301E78279EB5A078BB
-:10CD70008669952309F50D53F70528DEF191A8C2C0
-:10CD8000E68323611CB73FC9DAF60DA07ED4B0F06C
-:10CD9000D6F888C0DADA87A5890757D0B8F97915A7
-:10CDA000E6F21AF93E990267011CAA817302E0B506
-:10CDB000BC7D98D1CB6CDA7E14FD33CEC6F705DA94
-:10CDC000F6F37CF95DD1FFDB2AD8707FE19E61E745
-:10CDD000CC18CF199BE7DD1B0BEDE2D3428B42C091
-:10CDE000C4DFB355A0F10ED814B54A4EA2235B0E92
-:10CDF0003C6F589EC3F74D2C0D4DF98E0EF87040C8
-:10CE00009ADE4EE19FB11BC5C7E8CFD22030731622
-:10CE1000EF2721FEDADE47FAD1FB09F4BEC712750F
-:10CE2000EDEFDF358C39DC1DF0D12D698A3EC4B8B9
-:10CE3000B0DA3FD0646283E0E8286E73ABD2BEC53F
-:10CE400060A86080A7F19BD25661DC6B14E37C5133
-:10CE5000B829B548E6FCC71C01F3FDB9F166A7E99E
-:10CE6000D767F827E9DFF7FC1CBE86B6C39742FFF9
-:10CE7000323D9F841B9DEF7E0FE3088F126CE8A765
-:10CE8000563A8356B070A4BBC2D7F2C022C73098BE
-:10CE90005F10D3C5F15AF95ACE2C42BEAE646AFB7C
-:10CEA000EC55487FA7A1B53DE7F346A1F5FD342336
-:10CEB000C34FD0FB733665ADC23839D083EA09362B
-:10CEC000FE0C9F3704C0C302E4827198E412F5326D
-:10CED000E027B983FDDBA50A7ECF0AFC7C53CB0893
-:10CEE000EECFB524F0F2C534EEBF3DAEE0F169A55A
-:10CEF0006CE9A2C143AF363AC39F07D7039A7913AF
-:10CF00009EEE8E52E62D4F2C1A03F36A8960FD05C2
-:10CF1000E093759BC6AF5AA4E193E7374D2C423C92
-:10CF2000B4F627171E443CDEADE0E9C54D130E22D2
-:10CF30001FE1911394B78A1CBEFF6AD9FA7187F278
-:10CF400036B73DFFC8985FA1821809DF131CA62CD5
-:10CF5000DE4F4207F859D0FE7D47C0FBCC14753D2B
-:10CF6000EF2BF4191340BF8200FA8D0C808BF57003
-:10CF70009B1F0C3D83FF54B263E5E26E183FDB2438
-:10CF8000D01D2BD0CF66019E37A6DD5B14D203F9EE
-:10CF90005432C5425B4FDAD483D6BE208FA8BF4837
-:10CFA000FFBA485F4F443927785A91E346E49BEA39
-:10CFB000C531D07E6F5AC92ABCF77ACFA2952644D4
-:10CFC000FA0769335619A1DFBBB3FEB417FB330A66
-:10CFD000A507C7083FC3A7F501F3581B00CB01ED18
-:10CFE000575D459F2F0A78FF9180FA1501F0EA00FE
-:10CFF00078A9FEFD6933F8FEE534A01F22EE6AF23F
-:10D00000E24D6B5D37B4DA2F01EDD9877A7EBFBD73
-:10D010008EC327373D50B4344403A7FDAA48CBBF85
-:10D0200026C55E4C8E723A3AE2DF439DF14F5AA01C
-:10D030005D9375E7120F33A6B3BF7B443DDC24AA92
-:10D04000F2B5F0E0BC74CD7EA05C5B84F194CEF7C9
-:10D050002BE422DCAFB8FD71B57D4D9143333FB574
-:10D060007DFEBFAE88F8BD2B6935451B68FF4FD9E3
-:10D07000BF8BE0E52D97AF84215DF2F1FC28D677D8
-:10D08000F124CF4DD7CC8F35A4E0FC9A1EE6F70DE6
-:10D09000E53AA007C87909B3D3FE775378F8821729
-:10D0A000A0FD9E87C50568BF0E2F88A4F346E3FB4D
-:10D0B000727F7B4F789F6EF701DC143CD58C71D565
-:10D0C000A6474751F98EE858E203E4F7EAFB5851C6
-:10D0D000485FAC0F27BCC4BCB4ACA816E420B6AF04
-:10D0E00044EFBB226CDD76A01FBADCC470FF89312F
-:10D0F000FB73C427BFB3909F3AADB61FEDF794FC06
-:10D10000BE30BF07B42B596CA2F83FFCD17D0CD7C1
-:10D11000F25166AC9FB14829E55BA9DCFDD31B1F2A
-:10D1200066D0BE8E48E77676F9238E8324B3AFE5CA
-:10D13000FE745FE1A8925F656B5F576A5F18C7D79F
-:10D140006792285F0AB3496113D06FBBC191D6378C
-:10D15000BAADDDEE9F44DAAF7AEB4C4937DCDF1B2A
-:10D16000D897F3CB2E7F49B7128D5D2F3D6B243CB2
-:10D17000EF364BF3506FECEED25B90496E1B2231D1
-:10D18000CE3A43F19B814F16BCD1011FF6E92B1219
-:10D190005E8E5916E05958D6F4DBE861382EF5BD9D
-:10D1A000EC83AE3ACC1763EA250DD4FAC7B9C9238C
-:10D1B0006EC6F1B6F1D706D2E7E41F033CBAEFBA68
-:10D1C0005532D80FB607FC7A1C4794231FF9493D06
-:10D1D0008FC7621A52B47185363F74A122FFBCDD3D
-:10D1E00057783818BEFFD5AB4174EEEB2BF98B5056
-:10D1F000AD7FACCAC7CCB0FF39DC42EBE2704988E6
-:10D2000003BE31D61C7F08DE2B7DD6447AB3F4D919
-:10D21000E8477C580FF4C42DC3C0EF3EDF979F074B
-:10D22000E85C3EB6148DECA5958FCD4538DFCEE495
-:10D23000637ADFCD9DC8474D37E4A3FC674D74BECC
-:10D24000BAB84BF59D18472C36DCC8EA607C239EA3
-:10D25000FD5537DC6799F9AC85E8EA0D0D3DCEE761
-:10D26000D5271EE7D56A7FFA727DE5ADCD257B21F6
-:10D270001AC03B03FD2D2E31D17A44EC6626BD2722
-:10D2800086D9797D1716BF10ECF2E2D01C09E9EBC4
-:10D2900056E401EA25E4B3BCF049B7E1B996C30B03
-:10D2A00012691FEC6416DF079BF5D0F361E87F7EFF
-:10D2B000358F9FEF9E8DF976709DFB6FEE7B552924
-:10D2C000F976FEB7F6BD9EE8ABDC1B6ADDF7E2E758
-:10D2D00040F72CC8CCE278619205F1143780F072E7
-:10D2E000AB95494180173182A5A0FE51F7BDC45FBF
-:10D2F00073FD241A045AA71FAB91297F415E9895AC
-:10D300003FFF35BFB7273E55C8681F2CAA9AF6C104
-:10D310004211AF18BF159813E5E768903DEEFE7413
-:10D32000E4BF20A2E7CCE7667DFA872CA4DBD828EF
-:10D330005D3C41E13FF5FD13B537D1F84E08CC8691
-:10D34000F63EEF8FA923913E4DA2EBA9BB496F0694
-:10D35000D3FE39B3797F3718E099B5B0CE66C837B8
-:10D360003DE212D2DBFA99B9F0E114A477DE1F8313
-:10D370003C78FE66C6A2A0D5780EA3BC91DFF39ED2
-:10D38000B6EC7B3A8FCBE28DD518E7FC7A51103F93
-:10D39000A7BE7530F1CF34033FE7C2E2CC145F2A59
-:10D3A0000F51E05E39046BEE2F99911EEAFD9BBD93
-:10D3B000A857E0FBC7557CA0DF887A573D47CFAA26
-:10D3C0002594FF6283D0E139AFBFF5E5FEE9B438BB
-:10D3D0003B9D17AD78CC625F18CFE92C0EC2EF32BF
-:10D3E0005A1755187CF9ABB15F0393B6D970FDD0CD
-:10D3F000528AEB6DB63595F210541999D11C01CFB4
-:10D4000025AECFD4F1544985B7123F19D921630411
-:10D41000E2B1E5D316E48F85A112C6452ABADA5DDA
-:10D42000D46FA8D5C6ED84F25D1C7B22F281DF1C8F
-:10D43000817CF0A960B0F0FC030E03D49F63BCBEF6
-:10D44000F53B8B96A5D3BCAD36C3881EC877E7F3F2
-:10D4500057C37BB73229A107DE135B1679E724ACEB
-:10D460007F4D24BD04C2F4580EFA7BAF8999B84EA3
-:10D470009DB66C0FCD6FCEE6017883804D7BFD00AD
-:10D48000D9A7390A7F7995736B25006F463C2A7AB4
-:10D49000C125B26A8A8729786CC5AF525FB1CC4486
-:10D4A000F4A8586C213A57D4FE8DFAAD086DE98680
-:10D4B000F4A8D866A2FC1DD61BF83C4A6A7B0F3B39
-:10D4C00004E32E3185DB0478542E8F35235C5E2FE8
-:10D4D00010AC7EAF62D95FBB19D2797F585A0C7CF1
-:10D4E0009FB5ADDFE838B467A75F8D8C9BA6A1FB25
-:10D4F000E945DBC370DFF968902719CFF9FAEE0F21
-:10D50000B2E3B942359E767A5132BF0F646B09C5DA
-:10D51000FDEA19F31223D0CE1DB679CC587FB8217D
-:10D520001E8FCC3187CD360C6187F146824F2BE7B9
-:10D5300048E80FF3070A9C6FCA5FDD634E80EFF582
-:10D54000BF81E3E7EC6B47F70E417C001FD950FF2A
-:10D55000C4B5A4A01DAE30B4A4C4227D5E16C85FBD
-:10D5600080F5A903F38F54225F0D047DA8F055E5E3
-:10D57000D6EDF3513E2BDE3C998F783D3B969931A9
-:10D580003E56A1CC1FD68FEF1AA17DC59675F98C9A
-:10D59000BFFF2EF29D6AEF015E6402B8D9CCE18C28
-:10D5A0001BB87E6E367B29EF5DF39D8CD1FE999181
-:10D5B0008DC47640797E0F401495FB69D531137880
-:10D5C000DE3D597B7EAE12EBD3DBEA3BE39BF137CA
-:10D5D00018143A5BC82E8D47BC00EC5DB62D0CF9D3
-:10D5E000E2EC6B7BF60E41B9D822D898561E54391E
-:10D5F0008CF3F17AC0DF1388BF2DE7F3310FC5EC50
-:10D6000033A112D250C5932A6F2A5EAA18C7838A03
-:10D61000972AA38227A5DEA9E0A19CF9A83F76A6B8
-:10D62000BFB411FB7FF347DA6F3B3B8D09FC9C30A5
-:10D63000CF8BA6CECF15A1DFDFAFBD81F3FD146583
-:10D640009EE5366E17CBA398543B80F8CC6156F319
-:10D650004B4293B39B8FE8C6BF5A9183567AE33C03
-:10D66000609C5E03BF2718A8BFE6297C75A476B22C
-:10D6700007F5CA6C19FAC94279B04DC17D4EF6BAA8
-:10D68000A8E86FB0999AEFE6BD7284F81074971409
-:10D69000016B16D3261807FA5F677A53BC30AFBB0D
-:10D6A00097E6BD718C8D19409F1C11BCA13BD01E0B
-:10D6B0003C24929E52C7E9903F247A381AB87C22C3
-:10D6C000BF607CB0552F048CB75619AFC560F7E228
-:10D6D000B960B650A0FB6BE2C2B3A187B8BDA34846
-:10D6E000625BFF37BD8BFB918E8B61924035762359
-:10D6F000B6ABBC189680F6FB88127738B2787B58A8
-:10D7000089860E4F75F69D258325A47F5EC8A18767
-:10D71000518E1E53DA359BED2317A03EB81426E137
-:10D7200079A9E608391DFDA866035BCA22381F1ACD
-:10D73000BBB5E10FE485F007F5D293B636B954C70F
-:10D740000D74F320DDA0BD83CB919DF6312AA3F8A3
-:10D75000BEE8D5E529D34BFAA95690D667B5B5539F
-:10D76000EFE53DAACC9B64A45B9B3D40FE447B67F8
-:10D7700051F21805E641BDB557D738C45F5588D575
-:10D78000804BB8C0FA40B86D3D556D443F9F2D8A1F
-:10D79000D9ABBD97763448A6FB67BE1E225B0FF45B
-:10D7A000A8BDFF7D7E9EB791DFDB52ED34FCAD68F6
-:10D7B000E53F78AF2CEB7C3EEAD717732D74AFA909
-:10D7C0006BBF04FACE29D6601E8EF6FFDB96FC30C6
-:10D7D000A96D7D72D3458F184EFE42BC6E7D507E82
-:10D7E000E65D92E70AD642F7B1A72D3B307630D2FC
-:10D7F000FB25139D1F98511F4F76EEE486E999385B
-:10D80000DF698B93099EB5F13E0E2FE3F90FA72D2B
-:10D81000CE7E01FDAFA3418E7CE467DF4AC186EB7B
-:10D82000ABA11BB31FB907EA8786F6E98AE3FE6A54
-:10D83000C3D1B148F7AF1688A49F1C1B9EBC13EB45
-:10D840001D3B44BC3106EB19DB2398D79419C36DFB
-:10D85000E817A8E70BEB4C5CDF9E51F4C231454F53
-:10D860001C53F82FAFAE2E05FD25DF3AB047B8EFB9
-:10D870006DF695D2F96EC1665F0FFCF2AD2013CC48
-:10D880006CB684DA5CBCCFB296F2E39C4BB6D8D0CF
-:10D890004FBED7C2ECE8D7DEBBBBF7405C2A38945A
-:10D8A00075D5D848FE5D155FEAF74F2BDF65E28A34
-:10D8B00052DA7788941250BF352BE7C68F2AE33DA2
-:10D8C000B9E8A53BD12F38B929398269F07E52C910
-:10D8D000D3340BF4E0960ED67BFE1BD4B8839BBEEC
-:10D8E00053A6C403F799EA7B61DECFC0FB5D27D660
-:10D8F0000559313F6FE03DAF13266E3FDADDF7DAB1
-:10D90000A18703F3DC068EA7753D1378FFBF5F4840
-:10D91000877EBC2A6781EFB7BB4F9E746DE7AB3043
-:10D920002F19DEF7DE7303A3F74606FFEB0DD4D7FE
-:10D93000A5F5161BDEBF3F1624D17A48CE66D24627
-:10D94000B43356291CD7F3C7F665D2F9BFD22F19C5
-:10D95000C955E956D18DA98ADF5D99FAF83080EF73
-:10D96000DB6AB2E3FB2757ADBC938B993ECF420EE7
-:10D97000E3F23913D6491E5BDBBA2870BD347BF560
-:10D9800066BA47F84BAD97D4385220BE73FBE9F323
-:10D990002D04DE9FDB0D6C9333B03DBECFD4B86851
-:10D9A0005DF45D4D1995B90DEBF26225BC4F71E444
-:10D9B000B1A12837A1E1140F3953534D9B78DFED06
-:10D9C000C8BC8CF743DF0A09B7A1BEF8AE66817206
-:10D9D000B940E113852F6FDADA24C6326ADF3814D2
-:10D9E000DAEF0A09A7BB2E498E9C70B4F32A5D03B7
-:10D9F000EF37ABF33BF510A7AB3ADE539BA687A1FD
-:10DA0000DFD9B426B23117FA9383C36DE86FCF54D0
-:10DA1000CEBF1C5FCDF5CDB7D6F017C6E0F999B5EE
-:10DA200013BBE1BAEE3E93CF6C877EED6F1786E1B4
-:10DA30007AFF1BA3370CEF1B7F03ED3D68278C6E2D
-:10DA400011F5DC900246FB78433C4626C5D3963957
-:10DA5000F145EE19A31BE97ADA7371CF15E4A3330C
-:10DA6000068A770166F65C81F6F6D03E1427BC6F15
-:10DA7000275F6FB27F75E1F501F7169FE8C7F5D212
-:10DA800089B56F8CA3F5F906930DC7F9DD86BF76CE
-:10DA9000C37338B3193F5FFFED2681E6311BF831C0
-:10DAA000281EF5038F83CE06BD6F15DAF361DEA65F
-:10DAB0005AE2C3D9C08716F4D31C3C1FF36CCCC701
-:10DAC0002CB176F93FBA2A7C3707F80EEFEFFED279
-:10DAD000793F96F70B3CB7CAF950A5BB8A1795FE5C
-:10DAE0006D7CC874F905231A060C8F656DFA40BD6C
-:10DAF000DFC18CDE15784F63BE185A8FF9AAF61B6A
-:10DB0000ABFF48795B6423DB48F69CA561BEBCF99A
-:10DB1000E20D768C07D699AB5BF3BA607D605E1739
-:10DB20003184BF5F88F98961BE21E9F1F4BD09360E
-:10DB3000FB2844B729CA4B710131CFE0A07B79752E
-:10DB4000165A3707EAA15714FADE86BE03FA3DFDDE
-:10DB5000F8796DF5DE9F5A82A1E98DFC5E181C7183
-:10DB60004982263B5EF9FC0EDCA72D1C1AF1AB4462
-:10DB7000F87E53BF2377E0BD8DC2CC886D0900EFDE
-:10DB800079E5EFBCFEC6886C13FA01C2D7778C44E6
-:10DB9000BFB19FE3CD7E9AEFA8FDC2F39DF8FCF3E1
-:10DBA00038D7DBFDF8BE6929D2FB9C10C6F3BD2532
-:10DBB000F9280EAABEF7B1C00EBF25B4C15E138B03
-:10DBC000C3BC06CDFDB83EEDAC8C4A77ECE5DFD7A3
-:10DBD0003F470A7D8FEB4C65FFC76095CCE8FF3966
-:10DBE000ED663BCFAFC89C56F0ABC62BFC5B62BD6D
-:10DBF0003C92EC6F35B35B3081C952FD7DACBE6D9C
-:10DC0000F7F6D65ECFBD3D26F33C7C754A1EBECEF0
-:10DC1000EE510A8DEFFF88FE65E0FDA9CCBFB4BCD4
-:10DC2000897C320EF80AED45560B87C72B7C52B122
-:10DC30007D2CE57B9EFBB1C98D7EC22CC51F4B722E
-:10DC4000756112B4BB04F28B7AE1CC384F0AEA8FCB
-:10DC50001335AC3E09145681D5E543BA34C7BF4FDE
-:10DC600079D14EACAD0B43BFE72CAC27C64017E5CE
-:10DC70008A7FCF2E8B9E5BD00F8EEFBB7EB986DF67
-:10DC80007EECC7EDFF99784F1CAE6FE4780BCFD7D1
-:10DC900078790FE5792E48189D8D71A4FD353BD814
-:10DCA000D1E4B6F73ABB8F32C43082A56BF625C7F4
-:10DCB000193B3EA7F1AD9A4F7303B7DF16633DE5FD
-:10DCC000D1025256D712ECA4B8520CF228C687A53E
-:10DCD00007085E328BD9E81E6BDB3E1DDD0755E978
-:10DCE000EFB05F1989EDC601FD51DF18AC3E23C2CC
-:10DCF000CE027E3EA52F100EF5894AFF51E2238FFA
-:10DD0000211DE62AF7B8E60AD51C3659E99C6BA016
-:10DD10007EC4B86631E94D796F2EFA63A02729AF2A
-:10DD200082A21725F81FE545CA5967A66657CF8B0B
-:10DD3000B437F73FD08F19E9FA3CE22A9D54FFAA85
-:10DD4000333AA97A12E835E87AE8A5E6299BFB2C54
-:10DD50008F77CE7D767ACC40C21B481CFA43317F48
-:10DD6000A2B8CA4C650E6C6D24F1B1698453427D32
-:10DD70003B76472C93E0D1AC1D029D6F1DB32392DF
-:10DD8000E0307F0F9E5749B1F7635FEC3E02E393AB
-:10DD9000275FF8621EE6BD1FF35B46F16343700820
-:10DDA000E59B104728791CC490F7F01EEB05C95875
-:10DDB0008DF6CAC9DAE50F3010FD9BF9395958E5DF
-:10DDC000C99C4EFCDEDFDC7DDCCECF1DCEF7052FFF
-:10DDD000E01BD0FE429148799A9E0ECE20FFADEE18
-:10DDE0000E13DD8F60B2E3135C574D52F8C112037E
-:10DDF0000B4B0DBD822490570D7D1E0D7AEC3D1707
-:10DE0000F4EF857597D013FCD8B4085DBD510EFAB8
-:10DE100006F3C79A62449B1BC61F6AEFA9EBCF2982
-:10DE2000969B309EC25CDC8F56F98B89678C746F31
-:10DE30007E18CF5F71C724FD3D49D3B0F323C9DEFF
-:10DE40000CD3FBDFCEABE46D5AA0F2535FD657C9BB
-:10DE50004B4FF6FFC2417E3F4462CED5AABCA0FE26
-:10DE600007EFE669C4CF9DCD26E696087FAF61FD3A
-:10DE700005D962C37840AB1F9E04EF45A191B4124F
-:10DE80009F635E50ED3C312FA8162F9817540B63FB
-:10DE90005E506D7BCC0BAAADC7BCA0DA7ACC0BAAC6
-:10DEA00085312FA8B63DE605D5C2981754DB1EF381
-:10DEB000826A61CC0BAA6D8F7941B5F59817545BD6
-:10DEC0008F7941B530E605D5B6C7BCA0DA7ACC0B60
-:10DED000AAADC7BCA05A18F3826ADB635E506D3DE1
-:10DEE000E605D5D6635E502D8C7941B5ED312FA86E
-:10DEF00016C6BCA0DAF69817540B635E506D7BCC47
-:10DF00000BAAADC73CA0DA7ACCFBA98531EFA7B646
-:10DF10007D0B5B948C766C67BCAB393D1AF79DBE6C
-:10DF2000257E3E742FF033CA61F3441BE52FBCCE2F
-:10DF300075624BBAB26E51F8F7120B9982E7D03B7B
-:10DF40007B5FE5CF97F09D6CB2074B897F59683DA9
-:10DF5000FA738F1A1D741F4A6EE0F7139991FB0133
-:10DF6000F345C5FF51F242CC1725F2033077B0518B
-:10DF7000339EAE0E2B336AF0105960D3C1D1CE1848
-:10DF80005DFBEE93245D7D0F579AAE3EB6CCAE831B
-:10DF90007B57E7E8DAF759E0D0C1F17281AE7DE254
-:10DFA00052A70E4EAE9FA46B9FBADAA5ABEFEB2E35
-:10DFB000D3D5F7DB54AD83FB372CD0B5BF7187AC1D
-:10DFC000AB1FE059AAABCF6CAED7C1D92DAB75ED65
-:10DFD000071F72EBEA73BD9B74F543BF6DD0C13769
-:10DFE000F976E8DADFE2F7E8E0E16C9FAE7D9EF5D6
-:10DFF000631D3CCAF699AEFDAD314774F5A3A593F8
-:10E00000BAFAF2D3DCBF6775B03EC0386508CFAF4F
-:10E0100051E9610DE85FDC9E765ED7DE1405EB0505
-:10E02000E09F0AD087E8F7FDD0258EF231B3EA30C1
-:10E030003BDEFB964754FF517BCF7BACFD47DDF7C2
-:10E040009F0E0EF304D1FAC24AF6F6A6FEFCBE59A4
-:10E050006B3E11F53E3BF3B198280A09F9D03F1207
-:10E06000F01796000E73F0BCD0E00791FF6403BF79
-:10E0700008FDCDD67591213E1EED72709B5FDCEBE5
-:10E080008A26CFCBD5FCE2DBF1DBD994A7D7D11F11
-:10E09000CAD90D9BF3719D358BC94B703F51CDB3E0
-:10E0A000B83F481FDF52CBD156C0AFE67BFB82EAB8
-:10E0B0007B0DFC19791F6D3D43ED5BFB55E25F0263
-:10E0C0004C76AEA6FFC760FD6704B9AEAF01F90399
-:10E0D0007FE8891A1BC1AB6A62087EAA46A27275E4
-:10E0E0004D1A95CFD4D8A97E6D4D0EC1CFD5380825
-:10E0F00076D71450B9BEC649CF37D44C22F8851A0A
-:10E1000017959B6ACAA87CB9A69AEA5FAD5940F0F8
-:10E11000EB3532950D354BE9F9969A7A82B7D6AC44
-:10E1200026F8CD1A37953B6A3651F9E79A06AA6F59
-:10E1300004FF0DE15D351E823D35CD04BF53D34252
-:10E14000F0BB358708DE5BE3A5B2B9E65B2A3FA8E2
-:10E15000F151FD5F6AFC049F51F621E6F71774F751
-:10E16000F154D8C88E717F0FF356601E861CD3778A
-:10E170003F971F37900EA794FE4D23C05DC23872A3
-:10E18000CF94F5759A75455D7F1EB7AC35F0FC2DC3
-:10E19000B53D99AD8EFC7607E3E7B4B8DF3E13FFDB
-:10E1A00025C1D3A89ABDB8DE28ADE679CAB3911FC0
-:10E1B000D3881FFF725DEB34655DB025D1F904F2A1
-:10E1C000230B717F1A9FD5768FFE40A2EBF7F8FCE8
-:10E1D00042F57D7BB1F54C9B3D053F32D6E289C6C9
-:10E1E000FC5FBE7DA27DBDD4F9F7AA94FB0F9DD63E
-:10E1F000EF3AD90BED55C14F22C5F5F79B4227E108
-:10E200003EFF8B0A3E5EEC6FD0957725395FE88F35
-:10E21000FBFBC9D52F3C20B4DDDF1F8F4B7C90EF7B
-:10E220004226511E9C89CCF11EBAE077802388F0EB
-:10E230005D4CA6F24482EB4F389FBB610182B06B0C
-:10E240008825AEA3F9048E67A7329E9DCA38D47282
-:10E250006E927307F6772CD9A11BCF8B4A7EA171E2
-:10E26000CCF71C8EEB1F6F9F3F2E24B6E1BB359E73
-:10E27000C2AA294F4631E3F19447312F46545B5EE1
-:10E280000C75FD50BC8FFFCE11FDA1FD9C1F4FEB07
-:10E29000DBC0BC194B86EFE17930603D86F77F8BA0
-:10E2A000EFFF15E95FFC3D28BCB73BBFCB61CA332C
-:10E2B000E39D05BC1A4B793578DE1B17203096F2AA
-:10E2C0006A50BD7003FCBF078ECB9A66A4F175A19E
-:10E2D0007C274F07EFA7BC341853B074C5BCC7F1F7
-:10E2E00034CFFDCEF3DCEF8EF2D1FDD42D89AEAF6D
-:10E2F000FAF338F953991827427EC2EFD8DC747EBE
-:10E300000DF8C92C008A6646013F75E06FA87C5362
-:10E31000A9DCC3519F033F9E407C7FB773701AF204
-:10E320004DD5AE5C09F15D67E0F7E9E40F947D41FE
-:10E33000E5F710C4F0F47574EF009D71A46F6E28BA
-:10E34000DD3B6812D982CD1DE8576B06A7F3FE1896
-:10E350009E4FB22E607F52C8E07417947663DFD967
-:10E360004779C82A9B79BC9A6579D39D1D9CCBAA15
-:10E370005AF0DBA79234F3A8DA71849FE762DE7467
-:10E38000ED392E49E957E53FD11CEA5A17A21D5F26
-:10E39000AB1C5832B2490E8EE3BDEE711629FC2E2D
-:10E3A000817E1FEC3BCC2FE3FAA38DCE03AAE702BC
-:10E3B0006730279533C17222DF3BE595747F7E3647
-:10E3C0006BA0E79539D3E310AE62BE9131B83E5AE7
-:10E3D0005AFB1E868326D6AF1CD503E635C13DED1C
-:10E3E0003D2C0B3708C76589E42806BFEF15AA172F
-:10E3F000F784EFDDF3EAF0C518B71E27723AB00FC5
-:10E40000391D8A819FC588F6F303B9E993114D72CE
-:10E4100043E357E5A6782173E0F903F57E48AB1C8A
-:10E42000E5CCF97B2CEEE1803F89FC5AB5CB12415B
-:10E43000EB53CC3383FA4A919FC546EE5FCA98DA14
-:10E4400094F427F7374C0E259F17E3FEC81C99AFAD
-:10E45000C74E99B8BC9DFA2AD48DFC3DBFCBEB7159
-:10E46000241F26553E7E9A42E77B18F81F37B7F7E0
-:10E470003F5AF3CCF462E46FB03857CCC0C4367B5B
-:10E480007ECAE01E14C6F3F23B105F7B63F8FA7994
-:10E490000EE6A1C1FAAE4E09E3A5A7A2AD745F28AE
-:10E4A00030CF1963769A9F49991F8C6C12FAD31654
-:10E4B00025AE561730DF1F82E268BED270D6C0D0BC
-:10E4C000B130DAE4E928F70F703B31BFCB6F5CF86D
-:10E4D0007D6F10B30943693E148F950DCC59C7E386
-:10E4E000B334BF0546AB0DCFE52C99267A05B213A0
-:10E4F000304E8CE74559ED3CAFAA9A7F3B70BC0E7D
-:10E50000FDF8AC710CE7E710992F68281F2F8E4F8C
-:10E51000067A107D009EA6191FF4EBA6FC3FC1925F
-:10E520000DFDB0E67F3DC0E3CBB5DC7F84F16F220B
-:10E53000FAF480F1C75E7DFC26645118FFDC0CAE56
-:10E54000A7EA700751443BDB95F4EF8420E7FDC850
-:10E550008749AEE5BDE6625C23D762C7F81DBB5CA8
-:10E56000D70BF554089328AFD63807CFAB05DD2D70
-:10E57000427E28C4BC7536F203CE68F3B0B180F891
-:10E580001A9085E2AB1330BEC6EF12BD8BF1D9896C
-:10E59000CAF9E6BEEC4B157F145F13717C14AF769D
-:10E5A000D1382D4859288330CE437470D33C82999A
-:10E5B000478967B7907FB052E1C3218718D9892175
-:10E5C00021DC4EEC3AC2DC78EEABE9C73BF342A16A
-:10E5D0007ED77923E929C013E503FCF35FB95DD940
-:10E5E00075F2782CEE07D4FEB83716FDC45D269779
-:10E5F0005885EFE75A6C0BED6D718DC643213CAE2B
-:10E60000A3C4F96E52E6D9C85AEAAAA03EA787C8A1
-:10E61000300E987DD0138CF28C396A3BDA6F1C7601
-:10E62000D1ACFB5D0B934D0FE7300D1C8F21B280F9
-:10E63000DFFFBCCE75EE6B199DFCEEE799A86BFA77
-:10E64000DDCF2C651E8F6638DFCC20BB364154F001
-:10E650002E20BE400F3421BE9FA930D3EF1A34556F
-:10E66000987B7835E3AB9FF50FC2EFEE7FFD83EC2F
-:10E67000D6EE6C353F4E43103E37CBA114777BE688
-:10E68000B281E26E6BCABEA6F5497D0EA3DF11AB67
-:10E69000BF5C427EC0A502869B48ACF6E6FF53866F
-:10E6A000F0E33759E97B81E37F1BFC790F10EA2DFA
-:10E6B000F0E73DA9E0AF803F8F30DE67C5721BF801
-:10E6C000F358BAC19FC7F239F0E7B11DFAF3583ECB
-:10E6D00003FE3C96ABC19FC7F229F0E7B1DD2AF0FB
-:10E6E000E7B17C02FC797C0EE3CAA3711D62746FF2
-:10E6F0007F6170D832F433243994FC8D8F1C03BBB6
-:10E70000783576F6E68B061D9D879DD1FFBECD90B0
-:10E710006311BADF3FC9F9B2A7AE7ED0C1045D7DF7
-:10E72000BCACFF7D9B3E0B7EFEF76D62CB4604FCCE
-:10E730003ECE6D01BF9FA3FF7D9B68E73D01BFBF3C
-:10E74000A3FF7D9BC7957C992A1D53A4D782902F48
-:10E75000D6944D08671DF8176AF984420F157EF2AA
-:10E760002171524771E4F01BB9BD7FE72BCBBE0D81
-:10E7700080CFDD2CDC8971F7DD0E03E9A5675687B4
-:10E78000501CD6E21D7212F967B78349C83FCF5CAF
-:10E790001ED105C7331CC888CF63CBB87DEA79A3E7
-:10E7A00044FC1C5BE613F1BEE82D977D76E4C72799
-:10E7B000C3F8EF6C41BFEE85D0DF3B6307F5C5388A
-:10E7C000CE3321C0CF286F1E5F7012C0E1570C0CF2
-:10E7D000F523D84ACAF32FFF2144398F7A85EEC337
-:10E7E00085A34E07BDB4BB8C7F3FC57B3958EB0F6B
-:10E7F0003DFED3D5F0C288AF3AADBF6D76028EB77D
-:10E800000DEFA01AA14C6165EC31C44739979FFA0E
-:10E810003203C9D3259027C40FCC9AE8C25AF4F228
-:10E82000FE04CA87960EE509CB709ECFAC32D26E3D
-:10E83000D928F1D57D37C22B6B0E8AB4CD2ED97C69
-:10E84000C11DF977EAB8D738F8FC22ECCC80762ED7
-:10E8500002F0E9A6FD6C7BADF6F7ACFEA0C8E7EFD1
-:10E8600015F97C5AE1075C6F233C4A5C3B3A05C7CB
-:10E8700091C3F535D053C0FB58976630FA1DD1DFF0
-:10E88000172574E928CFF72A651CCF29F35A8BFD89
-:10E89000923C73B91F25160FC77ED63819E9F1359A
-:10E8A0008EAF6B316E77A988F7DBE711AF80F8ED9B
-:10E8B00055ED13B0FFDEF33C54BA9571F62C6BA105
-:10E8C0007AB53FC9EEE6FC5EFE356B86F9E2215B68
-:10E8D00091ECC519CA8FBAC668646887519F217CBC
-:10E8E000C96AC43312ACE7AC630CEF33D78718693D
-:10E8F0009F624DE5298257DA381C2657A7E3F98B2A
-:10E900009DCA7CC264996077C07C52A4A9E1DADF19
-:10E91000730D2CB72B78DEA6E063A7C965B800E3BA
-:10E9200018FC37917EBFA3B3F7543B9BF3A521405E
-:10E93000FF74D1C93FFEC69E62171EBA11D7CFB26F
-:10E9400093EC82BA6EDB3686DBD795C1533EC47535
-:10E950007F91C2474F078F7B0FEB0F8CE6BF83D3AE
-:10E9600034FAD6DE5A3DB94319F77605EFB9B2E36A
-:10E97000AB79D0BED069C191811973F4FE15F4E76B
-:10E980001C23DA3D40B783D9AA3C388351EEDE1907
-:10E99000339D1DC2FE0BF8BED3B68289F45C62CEF5
-:10E9A000DBFBC37B9FB418C99F81E73F2B8FFB150F
-:10E9B000FCFF4519C7070AFE9B153EDD8B76241523
-:10E9C000E32C6954BEA3D8118F6247762976A451EF
-:10E9D000B1233BD18EA4E2BC2651B94DB12359A33A
-:10E9E0009F243FE912E6C515D08E54B22530CE7C67
-:10E9F00018BFD8817D1B9F2306FC4E56B08E4EB7A4
-:10EA0000A745EAE0D1526CC0EF742506FC8E573F53
-:10EA10005D7D9E3533E077C086EADADFE21F11F0D4
-:10EA20003B627A3B32E4D804BD3FF3E53DBAFA419C
-:10EA3000074B74F532FE03E69B7D8CF1FCB2C1C33B
-:10EA40007E87FC927DDCA8FE3E33EDA3A9FE56A096
-:10EA5000FF93CD5AF7F10CB48F273309CF75D256F7
-:10EA60006582AE9EFCA78326672C9E3FAC2D04BE1C
-:10EA7000C37388074BC730DA8707FE0579CA769ECD
-:10EA8000F892F28D8AC599E4275D34EAF6D37203D1
-:10EA9000F6C59C23F5FB66D957D937FBFB8DCABE5B
-:10EAA000433B7F2CE29AFC31902711C7FD74F09410
-:10EAB0003D88B79D9F713BD5F4D983B1F8FC5D6C5F
-:10EAC0000AFD6CFFE641F2BBB6B7CA872B58EB6F65
-:10EAD0006DF3727BF1E6C1841DB8CEC88A16480F6B
-:10EAE000661D993B99F8F1A0817E9F33A5A02A1855
-:10EAF000F1B2EDD0C260FDFD298D7E204269F48324
-:10EB000088AC1CA1AF8FD2F06102278EB6FDFF0545
-:10EB10006B92E82C00800000000000001F8B0800B2
-:10EB200000000000000BED7D0B7814D5BDF8999D19
-:10EB30007D25BB81CD03DD401226E161541E9BF78C
-:10EB40002624611202460DB0101E414298243C5208
-:10EB5000AB3655ABD18FDE4C08841051A2B515AC45
-:10EB60008F958AEDEDE316AD045494E5E903840531
-:10EB70008346455D10D1DBD2BF28D0DA7EF4F37F27
-:10EB80007EBF7326D9193601FAB8ADBD37F9747254
-:10EB900066CE9C39E7F77E9D0321D790809DE0CF1C
-:10EBA000D722FC3FD3D02E2081F4F076A9A17D831B
-:10EBB000A1FF4C43FB2643FF3ADDF3ADA19983153A
-:10EBC00027FD1B7E265E78DDDC4C48E0AABE7E3940
-:10EBD000669FE8197361BFDC6E53DFB8F4BF1D1F79
-:10EBE0002C319D4B20A4AB5BF4DB52E9F5E812A27B
-:10EBF00066D371BA4D7E22E0D544E8F3AD3DAC6DED
-:10EC000023AA631C7DBEB9DBECE99008D9CEBF3BDB
-:10EC1000DAB770B02F869089E6D311BF2B9F37F5F6
-:10EC2000AD8FC07833079308FDB4EB4E3E6EA0D98C
-:10EC30008ED76DCD2E12B0F53D176372BA7D741E5E
-:10EC40005D219387DEA6F32F8D2774DDBB9C8B1D82
-:10EC5000302E9D2F214329163C49552D230991E83B
-:10EC6000BC4D741D9B4326D241D7997D847D3FDBEB
-:10EC700022C7BB22C09510931EFE178C477F004E03
-:10EC80004ED1DF41E1B2F38339F1E3E8F82F748B21
-:10EC900004E663551A1CBEB1B4DDC3E6A58D3BC9BD
-:10ECA0002EEAE050421C3A7C149D8ED3B5B38FD12E
-:10ECB00079D2F7ADD2F47880EFC5E64948B4818EB9
-:10ECC000E20CEDA1BAFEA3258AB7B1FDE3E1058E02
-:10ECD00087CD8007BAB017A23C55BE08F0DAFCA178
-:10ECE000B5C11F76FF3F3C142843E06AC26BF63182
-:10ECF000932740E173AEDBE401E0E5BB3AC5C6080B
-:10ED0000E3149CD0D3676E77B40E5E44AC1E900FB4
-:10ED10009A8EB6ACDA1DD6FF1E4F4CC24907FD23B2
-:10ED20008FE4E1FA2FF2FE1F9BD555BB2D948E295F
-:10ED3000C96EA2FD88AB9290C4FEFB13B29C325BFD
-:10ED40001F1C892B9E2EEE52F0D489EF5D80AF7E82
-:10ED5000DEEF1B4765F0A4E0857EABC6F97EE88157
-:10ED600071423344F8FE838EDBC4109DF7238EDBA3
-:10ED700076017DEEFF935502BEDEF1A7AE24B8BF4B
-:10ED80002F634B12D0FD3EFA4E10D667A658A36DE6
-:10ED9000ABBAC001F4F546F761E41F89046F1C9F0C
-:10EDA0000D6D93A783767B39BD723019006EAF71FC
-:10EDB0003AD9CBF97537E7D79DCD6ECEC7125E5FD6
-:10EDC000694EC7FBDB9A3DD87EB1D98BEDADCD3214
-:10EDD000B6BB9ACBF17AA8D987F70F365761FBCD2E
-:10EDE0006685D161FA1D65208FCE255100D0752D25
-:10EDF000774C3347C2E7F5929ECFAE73EBF96C3296
-:10EE00008573787B927D98812F47E89E4FFCEA1AA4
-:10EE1000DDF3A2D399BAF684CF0A74FDF343A5BA01
-:10EE2000765ECF0DBAFE33CB2A75CF7D85F3F5F331
-:10EE3000139D285FB6BB0494CBD3B2EB75CFB7C399
-:10EE40001F2087ED825F4D05B8540E284F03801FA9
-:10EE50001BC091F1F1AB1C3F7B003F36C00B83FF21
-:10EE6000CB007FDA7E09E04DAF3967955D83259051
-:10EE7000030DD8B6A60F767A28FC5F768A28FFB7EE
-:10EE80003437E27BFBCED59D1571BE0E09F0B29DE5
-:10EE9000CF679F45392B26405B90960B17CE2BA74B
-:10EEA00047CFEFA3CB17A2DCDCDE7DDC01F4F6CA92
-:10EEB0005797A6F7B47EAF92CA49401FC5DD545795
-:10EEC000A55E5CFF697AEB62E36BFD40AF46D2174B
-:10EED000C6716FF84A11095DC7CB3DEA0F62A01DEC
-:10EEE000F89628D1766E8F3209F0B63B5D708902B4
-:10EEF000F69B24C3BCCF1FBE11EEBF12329B60DE57
-:10EF0000FBCFC71158C776AA776DB4DF1B64C49ACC
-:10EF1000F114DE819E2FF7015FAA4E8B6714B97042
-:10EF20001E291922CA87CD636C26613CE83B330950
-:10EF30008C013E57109E5D5FA539E1BA395DE4F75B
-:10EF400083C8EF5767B8F0BD97CF672640DB448290
-:10EF5000280F02674DE5FE08EBBD1ABE436548CE9B
-:10EF6000F98F1C2EDA7FEFD93A07C897577AD8F86D
-:10EF700039CB420E80D3BEAF3638E1FEF6F42C1CFE
-:10EF800077C7D8A5685F6C3F6B42BADE3E669533A3
-:10EF9000331BD7E901D86D3F5BB72603E8BAC78CAE
-:10EFA0006D89282408F496CEF4ECE6B375E4307D40
-:10EFB0007ECE23FA81CE7248E7DE4170FF8A555635
-:10EFC00092C6E06FBE82905BD9CB64924B2F074A0A
-:10EFD0007BF4FAC41AAA9E3503EC08A067DA9E6A8D
-:10EFE0008ED73DDFF7EEF2849980170A6FB8F7CA23
-:10EFF000D9DBF78D05F9E367EDDF1F7DDA3A985E1F
-:10F000005BC6AE1A761BF4DBECF0D82478A2902F06
-:10F01000693BEFACD90FF6468E533F8F7D57572291
-:10F02000DC379F65F6D5B974B69EED9E7AF2007D09
-:10F03000EF656E7F4D3A36B202BEB79FDA4F60572A
-:10F04000BCE4F94D7C16C833AFA8A3370A1FA497B8
-:10F0500073DD04C7A13F83A6523814B22E940F7DEE
-:10F06000ADDFA1CFF7E5DB5CCB29AAB79FDFB9EB1A
-:10F0700076DACE4B14894857F22DBF7E7EF93F7366
-:10F08000E8DAB77EA6B74B6C44E0FADC8972A03FA1
-:10F09000FE9970DAAA7B6FAAD9A61B378F843D47E9
-:10F0A0007C5AFB9EA75EDC3ED9C2E59A669F6CB196
-:10F0B00028F37D40D7C15917D1A3CBB9FE6D447950
-:10F0C000B195104F470695EB578B32F0E1B9A37617
-:10F0D0008463DE23332610D4D7CA04E00724C63065
-:10F0E0007BC07BF422F68A4B2509B9FC5304AEE6BB
-:10F0F0009321DABF9DAAF9AF4187737D6E1CB73F9C
-:10F10000BDFFA06310CAFDC232A6171E711C403D90
-:10F11000DFF501D5F302FB4688E27D36FC017AFF7C
-:10F12000032BF67FE97A01E58866375412D94255F8
-:10F130001C99E63D6BBE9FE2CF67AF197B2BBDBE2E
-:10F14000F46ED730E0DF97C03E40F9D0E860F6417A
-:10F150008C1A4FA7B8ADC7867CB8E5B489D8C16F03
-:10F16000D866433AA57C7ADF58FA9D6D41662F74C4
-:10F170009DE6F6DE3607F2C98EDFB379742D733063
-:10F180003FE39455067B7CCBB21884F36829266054
-:10F1900086F19AD8F83D1CAF6F73BCEEE3FAEA75BE
-:10F1A000AEAF5E057B02F517B32776813D41AF3BDD
-:10F1B000B83DB11DF419BD3E7FFAB9F7812FCF6D6F
-:10F1C0008B42BB733449DF04F3DAE6B4E23C8D7062
-:10F1D0009EA7E8F9606E95DE6EA818A3B71B6E189F
-:10F1E000394CD72E4F1AA17B7F4AC2B5BAE765CEFC
-:10F1F0002CBD3C324FD0B5E5F37ABB61BAF7463D42
-:10F200003DC9617603CA3BBDDF383BDC6F4C053C32
-:10F21000313F674BCFED88C72D47D3062B6176C2B0
-:10F22000560EE72D4799FEDC1AFA32468960477C74
-:10F23000C6FBFD96E3E314C7C77FA7C82732860045
-:10F24000BF7CC9E46F3F74ACBDAFBDF799FFE3412C
-:10F25000E17A7DB828219368EDDF77BD3F1A9E5F84
-:10F260002A5F503A6D0F513CDF2DC67476D0575649
-:10F27000991B9F84B6AA9AC9C66C0447BA199F5FA6
-:10F28000E30179DC1AD3F85378BEB9C5E6DA900009
-:10F290007CF41FBF86761365051BBDFE312AC54F62
-:10F2A00028AB59334D38AF672CBE611ED09B826F9F
-:10F2B000FEADB4BFBADEEAD9285D381F67A6A0311B
-:10F2C000FB56D04322E7FB3F0B8A3393DE977F291F
-:10F2D000A09C8E9208EA051BF105807F48833C1FA5
-:10F2E000F8839828FFD0EBBD594A1CF42732915C73
-:10F2F000741C646DFA3D21B8F74F029D978534AABE
-:10F30000308EAD814A18CACF0F662889D8DF3C13EA
-:10F31000C77F7E2A2120CFE872B09D7D177175C40A
-:10F32000D2F911C5F4256DCFA7FE3E7CDFE4B80508
-:10F33000F5D4FBFF6DF28B11ECA55E38DF62391559
-:10F34000D2E82CED42FAE9E274B135D587F2D7F86C
-:10F350007E6626F307B77C344D04FACAB60F92C115
-:10F36000AEA00B146750F9BEF5F80D8EDA08EF4D1C
-:10F37000CEAECDCC1CD2D7CE0E6E126B9DE8CF8B0D
-:10F38000B0AECDF46F58D78BDDA600E0F79CD38AE2
-:10F39000F2A4BF75E487F471883CB007C2F88D9081
-:10F3A0006AD7C96B01DE9DC2D7D786D3977C5F38F9
-:10F3B0007D3D7F217D219CEF7E2B1DE1DA2A30FAF5
-:10F3C00052297DC173B5B411E94B35115F6B36D24B
-:10F3D0001BBEDF64B6BB6C54422ECD4C43BAE98AE7
-:10F3E000A9783F20E1F746CC447FAE86FB733528F1
-:10F3F000E75F3FC2E4BC715D3B8ECC1916027B62B5
-:10F40000D4DC61C0E75DA00086C2F473E7817DD9DA
-:10F41000DBA6E8423B70328190157D9E3D4F86FE13
-:10F42000D76BED1CD6BF84F55F92F9F07A159E2F4D
-:10F43000E0CF4925EBAFB5D5BC7925D0DF62C2F668
-:10F4400007BCFF431E7929D0E383197203E02F0321
-:10F450008C167AFD64BC7C33DC5F9A4970BD778D75
-:10F46000976F096FFF669C7C5B787B73AF9FDAC9EF
-:10F47000FDD45BD12E7DBD6726DAB312F1DD087AAB
-:10F48000E7F5208B476D1E39B01F7480DBF3FBB9A5
-:10F490009FFA06C8A3AB409F303F750FF7537771B3
-:10F4A000BDB283FBA9DBB95E7999FB492F713FE9B6
-:10F4B00005F053AF023BA48AC749989F9A3D6A5210
-:10F4C00019DA112ECD4F4D89E8A74EF7EAF5CD5444
-:10F4D0008F5EDFDC981E6FD02F7A7D332541AF6FB2
-:10F4E000CA9CD71AF44B96AEBF7C5EEFA7169F2D31
-:10F4F000D5F52F3CA5F7530B4ECCD4F55F9A2921B7
-:10F500001EBD476FD2F5CBEDAED3F5EBC39B0FF12C
-:10F5100064551F77821DB779643DC71BB31734BC90
-:10F52000755D046FAF72BCEDE178DBC5F1B683E3C6
-:10F530006D3BB7075EE6787B89DB032F70BC6DE11E
-:10F5400078DBCCE30B0738DEF673BCBDC1FDDDEC28
-:10F5500051BBD03F3B779A70BC3D2146C25B79924C
-:10F5600068C083C380073DDE4ACDC30C784833E0D2
-:10F57000E11A5DBBF054A6010F05BAB6F768A90100
-:10F58000FE3718EC864ADD730D6F533DF30DF455CD
-:10F59000AFEB77C9FCE66476DE5FCB6F7BB91DB756
-:10F5A0009BE36D27E00DE3441E1E8FF0F2B82FB3EE
-:10F5B000E35EE478DBCAE3425D8037B0EF38DE5AC1
-:10F5C000479E413BFEDC790D6F0722E2ED72F9EDBB
-:10F5D0003AB73E2E34D9A58F0B4DB2EBF9AD84E886
-:10F5E000EDBB895FE9F9ADE8B4DEBE9BF0999EDF23
-:10F5F000F24333756D6A0724640D013D7593EEBDCA
-:10F600009C609DAE1FF59398DFE2E17ADF5F89FA97
-:10F61000A86D2AD38F940FD1FE7EE67BD40EC8E866
-:10F6200083C7F306FFE9F97EF4F7E82C66D774BDCB
-:10F630005F8370CD01FD1DA15F06EF9791E5C2AB21
-:10F64000CD4CD4E84C9CE6EEA1743EE691CCEE3174
-:10F65000C7AC812003FC044DB97D7692E8F4111803
-:10F660009FDA4B195961F6A0D9D548C06E106D0FBD
-:10F6700055C3BA8868F2A0DE35D847A4C125DF0E8D
-:10F68000F76F1FE4E9A0B05892158BF370934D16F5
-:10F69000B033EECD920B605C711283C7E664EABBB7
-:10F6A00053786C8E626D95C26B236D8B83AB117E2C
-:10F6B0005D145E62068C9F40EEA2F3AACCB2323893
-:10F6C000CC235C9F6ED4EB43301868FB9968D69EC0
-:10F6D0009DF5CC3C35A94FFFD6FCA66BBD4AC7199A
-:10F6E000ED1C5A4FC6D171D7A97160678EA1F30383
-:10F6F000F968726C4B8E647FF76787A9E3E4594021
-:10F700001F7771FD3A9A42C49CD9FFFBCF44FBBEE0
-:10F710000DF8CD067884C5BDA66631FBAC12C6C90E
-:10F7200041FB520EB72F49B012DB6D198CBE7EB271
-:10F730006626D29B93C24B8C85F933F8CDBF93D10B
-:10F74000D7E5AE439BFF0074E20BB7A7C3E8E4AE76
-:10F750004874422A3C6EF4D7FBB3E75436DF566E4A
-:10F760003F6A76B22D49B39BFD1C0E24501087577B
-:10F770003299C235CE45305E53E332F9FD146451FF
-:10F78000B19902CA9D3281B852617499303C564891
-:10F79000E1F2C7181FF41E8D36C8F738831E1EAA63
-:10F7A0006B179F4D33F889D70CA8E7CB9C130CFA45
-:10F7B0006992AE7F79D28D063FB6D2E0E7EAF58452
-:10F7C0009998558E2F13C62D544132E7C27D82F889
-:10F7D000097B8E7E672F9C1F93AB905FB95F63E4BC
-:10F7E000D77BB32484B3E0627E8DC60FDAFB1AFCAC
-:10F7F000AC6E86D7B5B99A7EF2A0DEB105BE4520C3
-:10F80000AE4A6D68795318BD6D68B6BF5F368A9091
-:10F81000A79BC9FB651479FE66175E9F6876E3F5C2
-:10F82000B16609AF8F36A763BF75CD1E6CFFA8D92F
-:10F830008BD7879B65BCFF507339B63B9B7DD85EE9
-:10F84000D35C85D78E6605EF8F342BAA9DAE6B6493
-:10F850003BF1A87429A33AE9F7C2E036A29DCE2372
-:10F860000CEEA9AA4BD71EDEE4D6F54F6E9474CFEA
-:10F870008735A4EB9E272A1E5DFBCA2AAFAEFF1078
-:10F880009FAC6BC79797EBFAC7CA3E5D3BC653A5C3
-:10F89000EBEF485774CF7716170C0E0DC0C70F3516
-:10F8A00007820C2EC12083D36B41069F1EBC9E0293
-:10F8B000F94BF118670EA2BC88CB7651D2A1F8B2F1
-:10F8C000B3FC5ABCD923C4868D1F5F4EC74B0F9F14
-:10F8D0002F1D4FE79FF9915E623C41DD7D477A8F96
-:10F8E000EEBDC9A2B314F211870A458C7B1D2A8C88
-:10F8F0008F01FBE53E8B6B6A36A5C7834744CF0675
-:10F90000780F5E88202F8F71BDE8186747B9307D6A
-:10F9100085B04144A265EFD7758F8818F73CF87D14
-:10F920005205EB72EC7C4102BA985E581B1F15E63B
-:10F93000AF4D0FFCA9CC0DF75764E446D1D1A6B763
-:10F94000A75AEBC7F4AD4BEB57B7426F5FF6D1BD8B
-:10F95000DF0EEB18AD7EDF0EF2AD236903B63BD2AE
-:10F9600007CE93FC96DB619F713BEC248FC39CE038
-:10F9700076D871EEF784B81DF621B7C38E72FBF905
-:10F980003D6E87F570BFE76D6E3F7773FBF930B75B
-:10F99000C33AD29F9B82F2F097021123F8A9DAF5BD
-:10F9A000DB3FD3DB61DFF2EBEDB0A5EBF476D8E221
-:10F9B0004EBD1D56DFAEB7C36A55BD1DB6B0496F0B
-:10F9C000872D68D4CBC3F90D9374ED798A3ECE367A
-:10F9D000B74A6F3F6BF899EDD3CBC5CA72BDFDDC5A
-:10F9E000DF7A5F0A5C8FF91F40E2C7617AAF379F09
-:10F9F0000B7A85D245F679AA57300EEE6B85FCC995
-:10FA000056E842F56F9129F816E47DC8DB2281B8EB
-:10FA1000D3CE73B915D323D05FAEAAA79BEAA3FABE
-:10FA2000F8C64D77EAE13AE316BD5F622DD7C355BC
-:10FA30004ED2FB2595463DE3D3C355250A01BA3482
-:10FA4000EA1B93E31609E4F7E5EA1D2BA17A85B5D5
-:10FA5000757AC70A77D274CF51EFB467B3785D2E49
-:10FA60009D07180B2D5179FB3D146E3BDF35639DCF
-:10FA7000089DE0E19154FF14C3DF147E2F5B14B5A1
-:10FA800011F26C3C2F42C453BBBE43FB5B87B1BC3D
-:10FA900008F9CA7C02C657E82FE02B97D076989ECB
-:10FAA000CB09B2E761F3D53DFF31E06CC0F9C887FF
-:10FAB00047E6FE4FCE272601EC21329E8CC77A8383
-:10FAC00050DC25C5578DF7B303CC0ECA4E62769035
-:10FAD0003779A6C8F34F04421E5E13B1633C3385E9
-:10FAE000F837429C337ABF631A6DB6C29089E0271B
-:10FAF000E9F97F56C5C0F979A31F76BD34C2E0B7D6
-:10FB00005D6BF0EBF4FC6F2306FB254424B027115A
-:10FB10000726DD7384D3614E472DC7DAE6C3BA5E8C
-:10FB200048E6F9154E3F1338BE08D9B4AB963EF7F8
-:10FB3000BA4502FE868DA8F1E3A1BE28D82843DE8F
-:10FB400021CF6B7321DEC4651EB44B4F31FC78E9C5
-:10FB50002FE0CF4BC2F005F83BAAC79FCDF0FC24A5
-:10FB6000A7A70BE7C5E8E89F372F035D39E32EA968
-:10FB70008EC578BF24288B31747E7B5C02E651F7FA
-:10FB8000041B8325B47DC6CDEA865625CD34E37C9F
-:10FB9000893C6832C5C314BE5E2FCF6B753513B474
-:10FBA0003B9E6FB6E395904611E4519BFBF678D0EF
-:10FBB0008F5D29CA30A84FEB1A12BB02F2F39B2DBE
-:10FBC000B14991EA5A7658F2509F76ED48344BF499
-:10FBD000FD12B3CB0CEF9524D589E0EF5DD743D070
-:10FBE0002E28492298CF7ABE3970887D4FC13A1CA1
-:10FBF000BA8E49609F96B96A27C524407C96DA364A
-:10FC000012D8B9B1E8BFEE1E6243BCD95C4BCBBE83
-:10FC10004BD7772051248297E2C7433C01D0034958
-:10FC20004E8F1F86735B8E039C1BE8EFD7697D7A2E
-:10FC300081F2F9F1707CE491B036E615F4EDA1396A
-:10FC4000BC0E8AE347220AD659B4F5B0FA32128ABA
-:10FC50009C67F988DB0D5A7CFF28B71BDEE371B780
-:10FC600043DC6E6833C46FDEE276C36E6E37ECE55C
-:10FC700076C36BDC6E7883DB0DFBB9DDD0EB2F1028
-:10FC8000B505F28AF3883D04FEC2815A0667F70A79
-:10FC9000C15F0EF970A5D3574AEFDB5658507E0E60
-:10FCA0004F525B203E6EAB5227C33ADCD59D2D7080
-:10FCB0006D29EE4884FBF3949347C1CF067A999A55
-:10FCC000CBF99DE261AD95C179DDE218CF72A067F5
-:10FCD000654905F64B6270B3D35F8077E222550029
-:10FCE0003A702B161DBC6B0DF09D07ED30F9110D10
-:10FCF000F448E179BD06F72C92C5E0AE4601DCA3DD
-:10FD00006A39DCD31322F2C93A0E770D2E3B8A6F83
-:10FD100036A9B4EB5B49AC6EE2ADC29B4D07E8FC83
-:10FD2000BB6511F3AFDD49BC4E907FD738DE3BDCBD
-:10FD30009E5D5B3A70BCEE20EFD7DB6E27926D7054
-:10FD4000D838A5F75924FA7E55607532F0C5DA41E6
-:10FD50005A9ED883F6F564B1F0CD543ACF20AF83E4
-:10FD6000D4E4E51CC26163F8DE5B7C9DFDCDE7ADAC
-:10FD7000D21B2D121D7756E01E02DFB3991BDDE169
-:10FD8000F5A5DD7C7EAB66DC41802F8329A71BD0E7
-:10FD90008FF7D924B0BB87277956021DB89314CBAF
-:10FDA000F7E8FD69541E4A2E9856E78E04E847DFAF
-:10FDB000799400BD5CB309E8E1AD643BCA9DFEE601
-:10FDC00073811EF113B447FAD32354FEA03D64ABF4
-:10FDD000F8F428F8B595A4D113A0EF05B33D4380FE
-:10FDE0008F499505F5733AFD0DCFAB69D74A83FE70
-:10FDF00076782D03CAE1E1E79BDBC1EF780BF807CA
-:10FE0000F3A02406EA73821577D8013ED393D37604
-:10FE1000027E48893D348AC26155E1CA0500AF556A
-:10FE2000154B5D02D055D1087C1E2CB19F848A9C55
-:10FE30009E9255C95218BC57AD26C50AC03BF92E33
-:10FE4000F712BAAEB4A43F342B946F7A2CCCEF796E
-:10FE5000A7F47749A961FDC7E694FC2C07F8DACD31
-:10FE6000E87CB455498B541FACD1794B7134C665CD
-:10FE70008ED7B27A057A7F65137D55A1FAAAC3D3CE
-:10FE8000C7C78B393D458D3ADB00FD95D53609FD59
-:10FE900033B1BAAD89B6ABC05E02FBE9610BF2A526
-:10FEA000C6CFC98D7AB9A918F8B6CAC0D71A3FED1E
-:10FEB000BC908F6300AF51B58C9FB4F519D735EF67
-:10FEC0002B6AE7C41362F4EFDE5D34229AE9B130A5
-:10FED000FB763CCA26C94AD7378BD3D32C4E4F94D6
-:10FEE0002477C07C0EDE33622AE04B6DA17E00CC0D
-:10FEF0006D99A5CFFE4D837592415EBAFE594D6254
-:10FF000006F8A7E44E4B1F3DA6E9BE87F50273C273
-:10FF1000DB40AFAAFC0ED81110CE848FFEF1D8A121
-:10FF20003DADF47BDD43E3498B07C73BC1E4A384CC
-:10FF3000E31D2C140779E1F9BDA33220854FC2E9F6
-:10FF4000958E1F52D9F39A7B4664A2B9C9DB1F2D47
-:10FF50001B021564C45761E9EB0FFF2B3323FE67C7
-:10FF60002F133640FC6FB4F8C5E95DB4FFAC4A9B73
-:10FF7000A7958E3FFBC13A0BD8FD95AAB2A79EF676
-:10FF8000ABA474E177E13A747C72D84C2C30CE612A
-:10FF900059209DB43D6B969E6F6A96E9DB467BE4E3
-:10FFA000488C9262A2EF7F2AD8C8067ADDB17EE93A
-:10FFB0001330DE270FDAB0AE90C0B772410F101EBB
-:10FFC0009F949FB8873EAF5B6723901799C7EDFD5D
-:10FFD00041B9A938AEC9518DEFD776C4A05F7C7204
-:10FFE000FD95E300FFED718DB7413DF527B14A0D59
-:10FFF000E0B56ED5B526888FB447774E86FE9F9ABA
-:020000022000DC
-:10000000886B43066D4B0F59603E3DD43E8078AB04
-:1000100036CFDAF630FCC37773591C779A89289B60
-:1000200022D8350FE6F6D627A8B6B0F93F9C2BE1CB
-:10003000FD6969716D3F80EF50ECBB3C1C2EB0EE4A
-:10004000C92C2EDA9EE4A91942DB2704E25A9E004D
-:1000500057F943E04FF57E1BD988E827D8DF3A6C83
-:10006000E8531D61FEFF383EAF8F63D9F3E3EE68BE
-:100070003FACF3B8C4DAAADBE9477A362BE97362FE
-:10008000D87A842B6017049BDF9118C99A86F820D0
-:10009000D273745E750F3F82F8DD4CE103FCD9E347
-:1000A00092DA76D0799CA4CA5A85E7EE4727033CBA
-:1000B000EFC8A4849A78219CEECD8DC3F99C5CD7BF
-:1000C0001A8375262EA258AFE883476DE796BB8545
-:1000D00071A8E755263F18FF09244CBE53FC4ECBB0
-:1000E000FFA1A50ED61B453A012FA6DD2BEC30CF84
-:1000F00079B516CC8F3989AF1CE469EDC302B6E936
-:10010000CF1AD017759CBFDAA5B8BD40C7C7C11EAE
-:10011000477FEFB13D501F50CBE557D5223D9D2E77
-:10012000769B75FC32A349CF3F749DBAF6FA5C56B4
-:10013000D7D9E3FD2401F4733B5D36C0E5D336C166
-:10014000BF01E5AB2F25BCBE2E35D7A4C5E1254B9D
-:1001500018FCEB28FDD581DEB093CED24458F7A829
-:100160002940EFD623D1384F237CFFD5E1F071B27F
-:10017000543384CEE7634AC750FF737C7D2BDA2F5C
-:10018000F023EAF8DAD506F4BD84CEF25117D2A7EF
-:1001900075C6D83E7AD1E053BB2E752FF4737F1EFF
-:1001A0002351E789D4BA0B96823DD94B4706F8C054
-:1001B0009ACDDA7746F4D1193E8F406793685F6E27
-:1001C0001F23BFD496F5E6F55206AA5F467C1700BA
-:1001D0005EC7CF873C9426E7D616BF817470C645AC
-:1001E000FC22F36BDF06B91FC3E7A61239509F004C
-:1001F000CA84EA5D17DE437F399EAF37B64978AFD0
-:100200002C8B90B826F1BD327A33B62C18003D61A4
-:100210007373BDBB2DEFD7A3AF80DD0D04E3348333
-:10022000A22B3C015C8D2B11F729585C8960FF3CA7
-:1002300028085510B71F44F47655BC011E24DB7CFA
-:1002400022DC2E8FE6F27EE9E41102FA3BE57AFF2A
-:10025000D46CB08B7EDE4BD76CFD12FC49E1D846E6
-:10026000FD3790537181CE4EA0CF1A6AB7FA71FD57
-:100270001ECCEB58CB04F2A8D017BFFA67C52F2EBF
-:100280008883F1F8457F71302D1E50C96E517F472C
-:100290007143DEAFD24DFD9C416067DDEC46BFC9C6
-:1002A0007D12ED522BB74BA3462D72B1FC19E31F03
-:1002B0002D1E60A42B635CC9C87F46BBF4B7B9DCB4
-:1002C0007EBA865C7339F1012D8EBF2A9DF93DAB54
-:1002D000D2EB9643FDDA39EEF7B85413E271CE2C27
-:1002E00001F1A8D96B73BCA76701FF69F50717F384
-:1002F0007B3A0C7E48B4F729598EA03FAD792C2E5D
-:10030000E42864CFE7D889D91E963FB0E5313D3760
-:1003100087EA413B5DE234BE8F683AD1E7A7E2F855
-:1003200038DA95FE04337375F5827179EC3EE64355
-:100330006D3C1F6AE7F582251967777D0DF76556D5
-:10034000076C936B1FFF1E8543F4AC188F09E957A8
-:10035000D9F843F093673950DE26A44B58F75A95E5
-:1003600064F720EDABF2DBE097A19D29C194659481
-:10037000B77329FF065C03F83BF681E3664ECDDFD9
-:10038000296474D51B5FF231F96DA2BF404FB3AB46
-:10039000F4F4325719987E32F3787C89EFE31A1D12
-:1003A0003ABFE36BA40BC6BF6B53583EFA5C05ED36
-:1003B00003F9DB7EEC71CDBF755AA85F44F112944E
-:1003C0007721BD07D389251CDFBE425157DF10CCF2
-:1003D00027D12EEAF7042D24F941DA6F903CF70675
-:1003E00017F8BE25B6985AD41B7E9D7D7F908E7BD4
-:1003F000CCD9FF3C8C74BE7AD4128CFF3F703D0583
-:10040000199DFF6A483863FDDE73F3C16F7B00DA24
-:10041000585FF08BF9506FF74094D6EEFAB11C5646
-:100420006F70E796977FAC1652BFC64EF52D1DCF65
-:100430002111CC5311B209E5B308F14090CF63C24A
-:10044000E08B7E831EDE463B5E2C647114D1C0F7C8
-:10045000C6EFDE9CA7DF6FD7DFBA8DEFD19FAA6B07
-:10046000F4F47F7BDE00F5B2C6F79D503F1173F9BF
-:1004700075075490627E5A24260FF8CBA494E0F7B7
-:100480000417A32B9030A0072D8D833C0837DA8EFC
-:1004900002BDE0776871559C7414E05F847C620053
-:1004A000F5399D4A481801FDB5FA03857CEDB8740D
-:1004B000B947E5318E2395B3FCF2BB3209C1F7464B
-:1004C0003FBACE970BFEFA11AA6725D0E337AB10DF
-:1004D0002F3BBB8C607EC0E152B04D3F156A754129
-:1004E000DC8AB56B288C402FDBDCFAFAD71DC58F70
-:1004F0009658E9F3B632166F3DD81C787705A5B546
-:10050000B6C20294972BA063D87C833BA3AC108720
-:1005100051D4EFDAC16EFE689968856B7079AD0AC7
-:100520008B7E3751DD244810775008F8F9D665AD39
-:100530009381AFDEB5A89E3827E655314FDCBE5C0F
-:10054000BD15FC1E59AA284FA57CB4A1DD8CFB8CDF
-:100550008E95FE2E490AE3C3535C9E1ED811F5000A
-:10056000C06195600F45C1D5A26C589D00DFB37A7C
-:100570005AE814DF6DF941327C67D5E2559E9DF053
-:10058000BCC5063B50C9AAF5F62A187755F212F7F2
-:1005900092B071EDC3AC8D703F38B40DEB5A9472CC
-:1005A0008F352A16D6F5450CE467DB9765C5032D14
-:1005B000B6255A53EAA1DF923FBE990778974C9827
-:1005C000B7B5BA3B2DB0EEE16E4585FCF85F72948D
-:1005D00057F3E83CE7351D9B8C757365B12BE13A09
-:1005E000FCFC77DA01FEEFF2784C28B10EF3B56D22
-:1005F0008BEAED30DFE98969CBC3E3316D858BEDA3
-:10060000A3E97B696E53EDD24117D2471BC45FC685
-:10061000C3BCE87AC642BF3F342BB45F28D95A1511
-:10062000699FD6F13CE6EFD95B97A6415CA46DBD0E
-:100630001DD233A44D50D6417E404D7546AC631F4C
-:10064000EB65EFD528AEC95609F183FC762AAFE7F2
-:10065000C7EA48B02B19FEEC6662B784E9BFB1392E
-:10066000259FE685F9D1177C37B10DF5419BC0F880
-:1006700077ECD6CF7F0CF5C2BFCAF17D0EEFAD6A25
-:1006800057D601BC886A27838AFBE793D06A9242D7
-:10069000A83C6E6BB15545AA430B2D12A7019F5084
-:1006A0000E3A3628254C2E2FAF4F83F848A8E52A5E
-:1006B000E4EEDEFEEBED1F021E42EBD363411F862C
-:1006C00092EBD2D2806E395D1AC7DF94C7ECC95F56
-:1006D00067F92C5EB02BC7B0BC67459ECFE645BD21
-:1006E000DDE9063BF71B40B72930DF7F22DDA29E04
-:1006F0003B9E770AE98AB82E2D1FE9232133E65362
-:100700008BFF8CF1DE8EB1DAFE27161FD4ECDEA84B
-:1007100051275680DFEACBD7F25D857BC05F9FA66D
-:10072000E5532B587CD0457F23C5077D86F8E03400
-:10073000435BB337A778B97DC2EDDB24A9D3570A51
-:100740007277BFE8017F229930BD32A342F0839DCA
-:10075000DD521C6DC779E7F33827F7BFE6F179BFA3
-:10076000D76C27904F32390A57C2FCA715B0F93B16
-:100770001A32720212C87716E7260D3609E3268070
-:10078000FC44D2EBA7F96010BA9E790D4BD1DEEF95
-:10079000835F0B8BF310BD3FE12306FF6111B3C7ED
-:1007A000347F6BBEC13E30DAFBC638755F5E609346
-:1007B0001DE8E9EC98CC8369123E56035A3E80F658
-:1007C0005BE8ED5E190A933FDD5C3F1C6E96DF5BD4
-:1007D00041D7BFD2F7133BD06987D96F077DD2517C
-:1007E0007E470CD05F47B5580E7C1F6C2EC77E0726
-:1007F0009A7D786DF6327DB12F47BEDB1B1677AE42
-:100800002C2F796F4578DD837CFD7B2BC2E63FDDA5
-:100810003B43D7D6E86CBA481A3745902FBFF2321F
-:10082000FE3753BD8F7586E22F3D03D5DF507FF530
-:100830006C38FCD678F5F6EC7D634A070F64B76830
-:10084000EBD3E0A2AD5B7BDEDF3CEFFA1BE7F9D434
-:1008500065CED3383F6DDEFDF59F0EC28AF2FF5D97
-:100860005B4BAAA12E765F8EF22CC8A3CA326125FB
-:10087000E44B0FF378E2E1C218DCE7BE279DF97B79
-:10088000D10D8C6FA2CB6660DEEF72F17B9397D9AE
-:1008900095B30A05BF4CFF9CC2F7DBBF97CEF2B9F8
-:1008A0002DC53F7F13F2D0EF145958BC97C8D3A67B
-:1008B00086E5B1D65AFD01C827BDD75BA771CBCA63
-:1008C000BB683B5A932B55FABCC3AC59FAFCE17494
-:1008D000439E21DA2057821ADC7329DC47F4C1BD1C
-:1008E0003F7FA23FFA20E6D3D9A0878CF0B9CD0094
-:1008F0001FA3FF327D9B811F2ED18FD9D09EBD07B4
-:10090000F26A2AB5274701FEE0117D2F5A7E16D3E1
-:100910002051F98C1E47874EAD01BDD84D5500E8DA
-:1009200097B533EF5807ED7354EF035EFAFB8EE68D
-:10093000BFFD2A473EE38D503FD02B47C03E180FE6
-:1009400079C1C8F641F7A2495323DA0733EBD372D2
-:10095000605E33F4F641F7FAF2C7B3E03ED807F42D
-:10096000A73BBF5E671F90F2AC8BC087C9DDA85163
-:10097000D911EBF47C398A2B3F6C3D8EF446125E24
-:10098000CFF879AE1C9B4FDF9FC1E308DAF7A8FDD3
-:10099000B5DB12A17E51FB5EA697C53D49793CD3DC
-:1009A0000FFC7A313C6A75D4F759643CEF458B7B78
-:1009B00069FD3CF94CCEB6A7C90DF09C38332F32F7
-:1009C0006E8B16E748CFB882D70D4BA4D71FFAB36A
-:1009D00020E1F308FE1E81BC6474D2E9DD2EDAE565
-:1009E00013AF920370283AED57211F62AB10D05E0F
-:1009F000B22511B46B2ED5BFBAD47EED501C00FECB
-:100A0000561D8B97976498B11DAD881B402E4C3CAA
-:100A10003F5800B9E153C4A760BED1F2179FFD044F
-:100A2000F435D5FB1087F19146DC67EDB4F8303E24
-:100A3000D1514147CE8038CC724B1AC6D3539F8DCB
-:100A400071C3D7FCED102FB779D87EA82AAFBA12A0
-:100A5000CECD985E344A20F4F9341F8BDFCC81F878
-:100A60000D8C3BEBF40E88FFCCF632F9057E1BE8CB
-:100A7000CDB9F5778FFD91F4D7C46DFCEDF1D918A0
-:100A80004F92305E60880FD90AA7607C48AB53F163
-:100A9000158AB8BF9B2439F11C0A637CC718CF3173
-:100AA000C67B8CF19DEFE6B37D1A9A3DD598AF8F4A
-:100AB00017DE0D7B1072C05EA2A292F275878524AC
-:100AC0007752FA3C58F229B993CEC3F94313D48034
-:100AD000D37E7A3BEC52E55690CA958F6121BB5E7E
-:100AE000B7807F5B2DD7627CCF48F70FE5B378DD09
-:100AF0008A7CA72E1F1C6C6EE2EF47A980E7EA9163
-:100B0000567F546ADF3897CA1F8FE6CA0FE433BF97
-:100B1000A213E89C7814DC4F5091E7D2D12D691CC8
-:100B2000423E0E8BDF18BFABCD471BFF72E7713F14
-:100B300087F7A5F2C9DAE202BB957EFF0CC5B18842
-:100B4000FA921AD461F1692D7EAEBD570379832CD8
-:100B5000B02305CC1F68F7C3E2D866A0DBE82445C4
-:100B60008E74DED4A1FCDE3C15E631B5EF104141B8
-:100B7000B950CFF335DA7866E26E413E00DAD6E658
-:100B80002546889B138FDD4649A66E8D4820FEE3DF
-:100B9000247227C49FADED166C13B56A2FD8E98B6C
-:100BA000385F580BA7EC85B89AC617C6BC8D554C54
-:100BB0009A02C3D677EAF357C6FC94D19ED6E2EBED
-:100BC00066FA1198D7FFD3F04115B57869EB7D0A25
-:100BD000D7F30D5DAF46571559DF7643FD495B945A
-:100BE000B2AE96CE4B7DDC8EF10A07CC0D6012A022
-:100BF000BF20271FF7FE04E4EF5FF2D9F9376D023B
-:100C0000AB47D99DF88784F0FD0B7FE1FCFB74BEF8
-:100C1000C4E222661280FD52644C02F285567F7255
-:100C20003091D981D38B1607EEA0ED5FF07AC96BB6
-:100C30008B366AF9FE4125B9044B3F002E6BADACF3
-:100C40002EEDE0D566AC2723E2FE9D7724F4D5EDAA
-:100C50005EBB49EF57DE98AEB7078DF69FD5D08EB5
-:100C60002BE072ADB7FE44B1631D5922AF23E3F30D
-:100C700037F2C9CF9A595EE3E7BCEEFF977CFFE5F8
-:100C80007FF1FABD4D7CFFE5737CDFAC06F7FB2CF2
-:100C90000AC6A38F5D4F6DBAD8BE38E0DAE27BDDBD
-:100CA000C0C7E30B587C68B2E8DC097AAA6F9FC51D
-:100CB000C0E7845596EBF366B37DFABCD9DC2A7D98
-:100CC000DEEC0F59B2A76008ECC368580EE714CCED
-:100CD000582162BE726DDB19D4B3E70AD1DABE5077
-:100CE0003EF07D18DA3E0EED7E69013BB7C8B133A8
-:100CF000D102F5F83356C44E81F83971655E92FD24
-:100D00007603C4DC613ECB5D16380F62462011E3EA
-:100D1000A1B5ED9737CEEA5157609CBA37CE4FAEAA
-:100D20005900EF1FD2E2FC6AFA0288F31FE271FE5B
-:100D3000EA826B1F07FFE8E97C7926C06359BE5C35
-:100D4000599003F7995CA0EDD9E16DFAF35AACFE26
-:100D5000FC896A78AFBF78BA3849688C542FB2B82A
-:100D6000A037CE5507EF137B6F9C6B116B77E23E7C
-:100D7000BB26FEDDD6F748038CD3FA2269782E8293
-:100D8000DDFD9D02411BEF16982F716BFACD775B4D
-:100D9000A4F1445B6C0AF8FDC7787D9971BCA6028A
-:100DA000B61F938E7717BE9FD43BBF261C9F8FD74D
-:100DB000B77FC615034CEBA8514C3D949E489B88C9
-:100DC00075278E2ED754A84B225346601DCBA1B257
-:100DD000CA7F89FD3487CA7EF36FB99FE63705A9BC
-:100DE000480717DB4FE398499448718D97385DEEBB
-:100DF0002CCC1A1C1A004FD6A67D41B0337ADB6684
-:100E00008540DECFDA7400EFDF17E5AA89685F70EE
-:100E10003A6D2B5BE48394D0AAE42962B8FDF2BB5F
-:100E20006C654F4184FD8967469EDD05AA69669918
-:100E3000601612D0DEF608547E662F9B21BA25423A
-:100E4000BC8D0F4EBA923E9F9544FDBBB0751734D2
-:100E50003CBB8BB22B292C3BD49A40FBBD98AB1CDE
-:100E600082F18BDDD26E68CFF26560DDFB7DB1046F
-:100E7000EDBC63A3ACFE0DA917CEFB049F3795CB49
-:100E8000CBCD972197DB9AF5F9EF55C9A397C3FC12
-:100E90004797921048D834F7E912C8FF8DCD514ECC
-:100EA000005FA5B9896C1B87F7651296BF318E1B51
-:100EB0003581E9DBD1A1A4FB219E7C50F3F78B2F78
-:100EC000DBDFFF221CDEC6EB31CDDF5F19D9DF3F50
-:100ED000B6283E723EA0ADBE0EF201C756EAFDFD39
-:100EE00063EBDD35B0CFEF18F7F78F4DA6FEFE9818
-:100EF000FEF301DA3AA91CB24D00B9D39B0FE0769C
-:100F00003B8F6BFB72E468784EFD79075CEFCD9206
-:100F10009D13E0B9EA5A80FB9149E47DB2E4319730
-:100F20000C7E8EB6AF3DD3AB0C81F7B5FDB2A341BD
-:100F3000B4C5415ED4755B247A9626307EF9EBF316
-:100F4000A4BD794C13EEA3BEC438FDA5F693BC9B9B
-:100F5000583D8E99D519462596BA213F756E8C1D40
-:100F6000F57B3BFC2F4CAFA61428B91386848F6306
-:100F7000385F55BAB4EF6A75FAA0AF40BF74135228
-:100F80000EF2E681D8468C7B9471BC1AAFD74D70B7
-:100F9000713DEB4A0078A614F8A620DE9FDF24E11D
-:100FA00039B0FC7E7FF5FDC6793C63F57D80FBEBB7
-:100FB0004B4589D5E511E48BABD25DA8A735FBABDA
-:100FC0006E422A3B578184465AE93A5BE55DCE2C56
-:100FD000DAEFA3C7CC19F0DA4F638805E6ED4BA72B
-:100FE000728EAEA3D4AD0C1F483EC28944262F5C3E
-:100FF0000382C98DD778765505B87F013F3E767656
-:1010000008D8E33F7D9CE5A7AE7A7C91BD2E6CFCB1
-:10101000472670B999C4E65F230B7E2915E6731A3B
-:10102000F350332493472690373E77642EC409A9A2
-:10103000FD360ADB67B01D944C5990D7FEC8FDE51C
-:1010400011E87FD5F7175F81F4CFE1B17059D6333E
-:1010500068E7E728DF03FC070BCFC48C188376FC16
-:101060003AA0FF8502F145B213EEE778BB416EBCB2
-:1010700009E8EC06D94660DF5AB0C48670FF699172
-:101080002081DF3A1D681EE2398F9931DE4CE17113
-:101090000B3CDFEF71E0B9D1A5F2B36668FF61AC3C
-:1010A00040AE1C401F5F365C0BCF0C017EFC08E895
-:1010B0002FC2FCEB38FF6AFC44E15E8AF39259BD13
-:1010C000487F74F579BEBC0EE8B23D4D69C073111E
-:1010D0005D332FE95CC4E93FF363ED9EEDE9C6A102
-:1010E0002442FDD741CE27C6FBFF3981F9054B3895
-:1010F0007F5CF5F8D9FDD7035F2FB3B800AF4FE79A
-:10110000FB7E0178EBF5BBFECE7264B2588DF80B16
-:1011100056D0B9E3390E2406DAD3469A117F6A29EC
-:101120003FE7E32EE26A8DC5B7B06D5F26209F3999
-:101130009C9D5560349BF31B8FCC86F74A44DCD7CB
-:101140001FB6CF65C03AB210DF7FD606FBCFA82D01
-:101150001F5C216AE76E1181CAB6609999DBF79F1F
-:101160003E2ED33F9FE1F5991F14894F407DE61134
-:10117000136B1F2A125396D3EF8452D83C3A1E1495
-:101180003C2D125C9F5A07F9CBFA26C1534EDB3532
-:10119000817B7A20C4B5E4611B0157E1931F2E9D2A
-:1011A00002EB39E32678BEECDC44C6374A90F84DB2
-:1011B000A97DFEED87C9C4AFE54B611F9D97EB99F3
-:1011C00087601F1B9DF775EA77D5BB216F4AFD5ECF
-:1011D00088ABC579583E333A68F6F809F8BBAC3E9F
-:1011E000B2ED7E813C04E3886B5AC13FB7F17ADDF2
-:1011F00068B916FDC7384A9F1268D09059B78FADAD
-:101200009E2848BFF1E5943332E0AAF78FB32FB29E
-:101210009F6DEE8221B1C02FE726E8F765F4175FD6
-:10122000D7AE70DE0DE0A78BE757B752BB1DD6FBDC
-:1012300022B5DBE1BA8DDAED701FCEA9862BEC6703
-:1012400083EB4E6AB7C315F6B3C115F6B3C115F6F5
-:10125000B3C17BB09F0DAEB09F0DF71F16A981C122
-:10126000009F926802F9A1360BA33335D98AFE4656
-:10127000A08860FE3E986CDDB01CE27502C3931A34
-:10128000CB9E0763949BB19D3A86E577CD9E14D89B
-:1012900047B842182381FDD46E55B07EF9D8723319
-:1012A00081FAE5D054E103C8BB10C1E411A97DB3B4
-:1012B000FDEBDB10FE8B656282BAF4E5706E28C828
-:1012C000E3CFC806169F0B8A70BE5C6B0CE1756499
-:1012D00037F9654A7F2705ADBD57017F7422C404E5
-:1012E000907E7729F07C7193C0DBAFFAE59150D7FF
-:1012F000A03D7FF349882FAE30B4BB4DBCAD0E7F0F
-:1013000012C63BA27D4F1D5603E31D49D39E272ED7
-:1013100084F6C751DAFB9F2F84F783BDF33989E345
-:101320008592B5FE520DB67BFDE7050AB687B0FE85
-:10133000EB77EE7B0AFCE5BFF778AD8A8A717C75A6
-:1013400016211B6323F0FF44511F0F95055D3C548C
-:101350008BBF9B1CD557E2FEB3076C28173F4E2668
-:10136000E887F417170D8BD7635CF4E713FB897FCD
-:101370001285C0B855100FF4E05795F0FD69446828
-:101380002450A7EE3B1523811D694D0A8BDF71198F
-:101390003050BCB0B591C507838A85A8A97D75FD7D
-:1013A000D6425ED7CFE3855A1D83B5F047BABC81DC
-:1013B000315E48C45B301FED5BA48F074E572E2F64
-:1013C0005E584D02962B81FE65C103FE7BB54BF93D
-:1013D000F00AB4F7AF61E7334AAF61DC54DB37069C
-:1013E00077E0DCA92ABEE68E5B8F7D7005EDE75FB6
-:1013F0001E25C166FCF9B794E0FBF9748510DFAADD
-:101400002E4A4378E77CE6794D0279EA3679989955
-:10141000E6FB7E22D80B8B62316FB2E0CE8C0F617F
-:101420009CC5AA03DFA37625A7F7AE27809E4408B4
-:101430005C86B5B35334FA9BFD04D0FFC478AD1D70
-:10144000FDA45C484889557B3F07DBF314CE7F6AD7
-:10145000FA93C07F474A357A7DA3069ECF1ED13BC3
-:101460001ED2F74487D6BE71213C6FEF1DAF1EBF61
-:10147000F70E9C6C84ED494F823E2A99A1E9ABE3BB
-:101480004FC0F86DD5DAFBA3FD108F9A6FD2F887A5
-:10149000F8819F15D2DB96412FBECFF9FFC8B64D1C
-:1014A0003550D77593F65CDD84EBADE6ED77B62964
-:1014B0004F023FFDDBAFEF7FF87BC6F602129C7C4C
-:1014C00065761F5F18E5D56BC54C8E781B9E05723F
-:1014D00025D58D4FE1F96E100F60F9ACC4593E90DF
-:1014E0001776D1433983F8DC2E8C731AC7595CC444
-:1014F000ECEB4F0BF579B136435ECCC7F353FD8D62
-:10150000F3269F4F7B69643F766C4EE99785503F89
-:10151000404E8B309E8B020CCE276BC952BE82FB95
-:101520009475F1DC4D2AB23C709FFAC52AD899D344
-:101530002838210FDB52FC28C6E943F916DD792053
-:101540005A9E73AD5546F9F809AFEB985F2A4FBE26
-:1015500087B66B878A6403D6793831DF601E667D73
-:101560000AE53ACF7B6AE7714CBBC8BE08E3BE947C
-:10157000CFF97ACF147658403EAB449D5C968DF2FD
-:101580003A08F5C626C71ACC03DB8A2D9847D0F255
-:10159000CF0A3FFF5BCBFB4E3C3F98E9F7742DAE83
-:1015A0003B70FE5769DAE143FBA0532426E1C27C7D
-:1015B000F0629F9A0CF52CD3CA6270BF4055DDEBE8
-:1015C00038FEA11482E70447CF6AC4FD41666A1F52
-:1015D000CA00179E2FD6EA63869FFF0EEE1BADD77B
-:1015E000EACDC58A0360A7DA1EA17E1674E0F96011
-:1015F0002D5F3CC320EF171756A29E25D48E1F15D2
-:101600000BDF1978DFF3031359FEF84427ABE7F734
-:1016100016E9F3C0F759589CAF3D4D4F571B273281
-:101620007FF5075C9FEE2CFE7915DACFC4E481BC10
-:1016300018798C9D0B073116DC6F653C8F397D0E58
-:10164000DA758F0DA74BA4B6B6B9E97D8C2B0AEBE2
-:10165000D87B9F8D238DE0B798CDAC4D2F2AE4FF2A
-:1016600033BDCAD422A8B368FA10FBB7AAACDEBB5C
-:10167000BFF8CDBC226D9F088BDFCC77EFED817D6D
-:10168000657F731CC7B0EFD527B1FA929585929606
-:1016900047C0730929E15AC05E4C29F0D5C3BCC9C3
-:1016A000984D12CC4393373B5EF9760DC81B224709
-:1016B000CE4B6B7CDF66C84BFBDCECFD378BEFAEB3
-:1016C00081F30DFACB433C5C2268F1B53B8A605E46
-:1016D000095ADE40BE13DABD7A1416E4D5E9D18585
-:1016E0000DFF0BF4689FDDFE760D8CF74D9B3FA53B
-:1016F000ABFF42BC96B3F8D9376DFE1326C87B60AA
-:10170000FEFFE8EF8C99E07B0BBEB35A90AB9C2CAC
-:10171000B9E711F479BE778B06C8F35D2CFEF07F34
-:10172000F18681E30D62F1BF66BCC10A7BA87290AD
-:101730008FAE2C06F95CC8F8E8DF5DEED1F5E6C0A7
-:101740007A570B9BFCD123FEFEFE7E4A8132A918FC
-:10175000F5A062DA49E96775899DD9330106DFDEB4
-:101760007806CCDFAB8B673CD9F00F8867D0F55695
-:10177000227ECBF8F7BFF9F8BB15E12B337BE2DF14
-:10178000903E57E3FA36B1F5FD13BEBF1EE9E5976B
-:101790008C5E7AE1C3EDA430F82C6CF8E7C0E75713
-:1017A000089FAD6C7EDF007CEE42787AD87C2FE615
-:1017B0005F1F2D1434B9FC06BE97CDE8E043B0AFEF
-:1017C00099DF3DE94AA9CFEF7E34573E50CCEA631A
-:1017D00082C5BAFA4FF910B407F08B8FC0F3087EB8
-:1017E000F1FBC5DF40BFD859C4E0D69777F1B3739A
-:1017F0006F49D50D57D3EF7C48E10DF1B68E261118
-:10180000ED8B734904CF03D0EC8D502CABDFBB7054
-:101810003F581981FD88B67C76CE88763E8059ACDB
-:101820001E1C902E84EB81418A15EABC96C8196D66
-:10183000B0BF75D29A2F70DF9555B6E1BFAB39DCDA
-:10184000EDB1DC097E34F573AF83786A830BF7D191
-:1018500069FBCAB4FD1F4B02F3F6C23EDB0E4A0F12
-:1018600089F43BD3CB2CC7C3D76FB437CC86B6F142
-:10187000DF354D98A8AF07A4F047FBE7DC3A561FC9
-:10188000D761263BA1FEA35E15FD2DB4BD718D80F1
-:10189000E7712EA270027F7F52672AD6935B93D89E
-:1018A0007967DABF7B4AE9A0331FECBF2322C17FEF
-:1018B000C78EEF27D3CEF98E9A7A1ACFDBFA98AE7D
-:1018C0001FCEEFD1CE9998C1E9448367544B3CC2F7
-:1018D000E51C850B01B8F0FD36D39A583EB8AD7AB9
-:1018E0007110C8BBA6F08B1591EA52E6B8F5E7A5D2
-:1018F0001BE319C6F3C6CDC43718F6D54D2F2C51AE
-:10190000C15EB5F17ACD6822E3B9161FAFF9093B84
-:10191000D7A2CCA23B47C4F8DD68039DDA0C71075F
-:10192000239D1AF1729D012F1BCDEC9CC1B66ED187
-:10193000A3D2DB6D0F2F6A877DF9EAC32656374F96
-:10194000643CF7A98D5ABCB8FF9C4E16E2F573397A
-:101950003C35BC10D268017EABD6F6A19B1A57C2AB
-:101960007ED2797C1FFA4D6413EE3358001604FDC5
-:10197000EE4208918B70AE8C6465CE818BC03CEAE0
-:10198000ABD83919265803E4091E3621BFB6B977FA
-:10199000E2BFFB15186A893D99CEFC8948F66C6F49
-:1019A0005C8142E264581CFFFFE2577F5BFC2AB770
-:1019B000889D47D5161570E5A7B2F326A09E29B7D6
-:1019C00048423918B42829B8DF61FDA72AD081B66A
-:1019D000DF81FE2CBB427F6EC2FA8903F87F45454A
-:1019E00004C76B4B0D25835CFBB09FBACAEDE03892
-:1019F000303DB46122E6DFA9FD9B0D728FD9BF1582
-:101A000079BEA7F13EDFE7ACC5913EF12AFF39313F
-:101A100007F6E71094C3B60AC10FFB77A63B853DD6
-:101A200082D4F77D62AC63FF5F9AB7BA93FB6DC156
-:101A30002882E720055349D57311F0F1835216A788
-:101A40000C6644C697F69CDA19EF4CCC61FED020A8
-:101A50004614A7ACFAF8C00703D18786C7F8C9F2C5
-:101A6000471373FADA0FE4299F40BB55F17D0078E4
-:101A70003DA98A12E8151250F03CBF69FF21BA0057
-:101A80008EFFE83CDCCAC2D44BCAC355039D0D503F
-:101A90002F78B9D7FF0FF9613D6B0080000000007F
-:101AA0001F8B080000000000000BED7D0D7854D561
-:101AB00099F0B973EFFC24998409041C24C00D0229
-:101AC000461BDC81802440E0CE4C12124860F83581
-:101AD00002E285008D5DB451791458BAB921102005
-:101AE000A260BFB4B5EAA34310DCDDFAD4D475AD6F
-:101AF00088AE23A2A55DD4A8A1C6556910E4B3ADF4
-:101B0000ED870A6BEBA7F57BDFF79C3B73EF64C2B5
-:101B10009FB14B9FFDC2A337E79EBFF7BCE7FD3FD8
-:101B2000EFB939EA648C4D82FF8CC2655A01632D8E
-:101B300058BE9CE18FC6A0BCB8BFA59C0B4D3B799D
-:101B4000FBD1DAFF891A2319D399E82FDABF23F1E1
-:101B5000F6478303A28697B145A21ECA3A96CDFEE8
-:101B60008C29794105FAD749667997A658E7CBDAE7
-:101B7000A5C17C279CF6F19788F18AB42F69FC48AF
-:101B80007CFE2FA31A948F27C17F03E3E552EDCF8C
-:101B9000D47E65BCFD9F755CEF49C92C8FD2B1FF27
-:101BA0001197D9FF8A6538FF3D79BC7E6A6854D4A5
-:101BB000B804E1F9A6C7BFD0F647A7A88C0D047CEE
-:101BC000D4FD2C7C19FCBAA47E97AC43BFA3CEC82D
-:101BD0007B2C07C8EC5E49DD037D8A58BBCC6402D0
-:101BE000DB258F87213489B5C05C2B42F0BF09808B
-:101BF00047AF83CF6304A21AD0D9E2A9269DD64469
-:101C000071DEDEE8EE9DE0771FC27527E0FEEE5242
-:101C10001BDCC6A865DA9404DCE110B487F116DF9A
-:101C200072931FE15C3CC25CDF249AA739DBECD7DE
-:101C30007DD6795F7BA194F0BD383E4F25B55F9C82
-:101C40006E8E37278AF326E05A48FB91806BA80DE9
-:101C50009F81D042C267C417DD3C08F013F1B38006
-:101C600001F85C54D728EB05163E32C22AF1913FA9
-:101C70005E8EDAF9A880F8A8AFE11A3629B24D8352
-:101C80007D62F9ED6A64CC37B1EE98F3325CB7212E
-:101C9000D1BA4D3A5AE2B3D0BB07D6AD9AE52B97ED
-:101CA000D579FB62DE8E329AF723C0374BF01333BF
-:101CB000062FD3BC173E5E9377B90BE15EA5495A58
-:101CC00014DA7F853FD312CFA35324E217C0E7BFB6
-:101CD000123E8B009F99F89E111F3C5E18F9B906C1
-:101CE000F54CD51D07002E97E6612D8083AA8991BA
-:101CF0007DD49EEDF423FE01001AA7F975A6209F5E
-:101D0000016F051C93A1EC6435ED29E6FD61C84126
-:101D1000ED9B18AB6807F8C66FF4AD8A7813F5BE73
-:101D2000320E5796781EC9ECBE6120CCDF0D551BD4
-:101D300061FC260398179E1FD4495109D6FC416EB9
-:101D4000645631943BF21C818D307DC73AF7D03513
-:101D5000D0BE2BCF1B40E8BAB27766FA60FC0F0208
-:101D6000B2C0D74DEF235F1FC98CF39381FAA5430F
-:101D7000E0F7D75A711BF2D3DB2A2F3F50FAF7EF67
-:101D80001B05486FCCC706011EB007F0AA23638A63
-:101D9000C70DF3BACA419C605F1FD35D50EFC67A8E
-:101DA00058E29C1FECFEC13C95E4C6CB23AF65AC6A
-:101DB00006DFABD85F31BA3D34AFF295444FE6BC95
-:101DC0003631AEABB5E9A526809FF9651642DEF245
-:101DD000F3F67ED6DDF89503C787723E43127CE1A9
-:101DE0002B58BF24CAF8F3152CD1CB2215790857EC
-:101DF0003E0BB4C07C7374E789783D7F6C57AE1599
-:101E000070223CF2868A6278A6D7D9DBCDCC87B225
-:101E100027519ED15A1B42BCCFD0A0DB58C60EB76B
-:101E2000D6C66A01CEC3456E9F049876E52AB6F6FB
-:101E30003359FB26C43B530F1D94012F4BC57C4DDA
-:101E4000BE39EF31E8B72A1F4AB0FE23FF10CC9C01
-:101E50009083FC26071CA28DC3C407A3764E079768
-:101E6000D30109DA373D63EEDBC436E4033943B20C
-:101E700095832EB37E4C1BF2E191B85C1DB91CCB4F
-:101E80000BAE30F926B30DF96A5A8659762D473EC6
-:101E9000EA569C429E0D6C433AD96A8E67EC20F953
-:101EA000F21633EB1D541F89CBBFF25D585EE81369
-:101EB000F018DF2779D8A4717D72D50BB16EE322BB
-:101EC000DA037F5E19447E8B7079975C3FA933DA21
-:101ED00094857C07F819A5F6E4B7F54199F828A28E
-:101EE0007D2CE3FE95D603CE60FFC23552E704A4F5
-:101EF0004F850D45BE6F6E009D3E0ACA2FA6B9D410
-:101F00004C94EBBE722D05FFFE3CC8F97752D09B76
-:101F100073127157C80A91EE9A1BD69AFD0DDC5FB9
-:101F20007DA42B9A96D7FB38AF851D24673A24DF12
-:101F30007CAE9F6586FA3978EF15DE629668F758B1
-:101F400098EBE5C6426D7A10E69D05E297C11E3614
-:101F50004EBD3F1282794E143B036EE233ED0DE429
-:101F6000B3B9828676B834B60EE546B1DBB71165F3
-:101F7000B75CE05C0B656508F02B962B387DEBF0C9
-:101F8000EFAB1138AE92A07F8063CE5A3B3F28CC96
-:101F900042DF50BF28989973F25B50B89A5D8DEB81
-:101FA000BFCBE95B8A726CEB08DF2D5679F6689837
-:101FB000CBB1A858EF81A9FF5283F8F994390228D0
-:101FC0003FF6A647489E1DCB62AC0D75BEC654DFDA
-:101FD00020E46BBE0E297F21C3F60F0E87250C0669
-:101FE00038D6BED3515A08EFEFE3FD3EBC86D53359
-:101FF0007CAFF0323C0C632CB63B4AEDEE0C8EA06D
-:1020000079D943018F07691F9AE37E7B59BB139FE0
-:102010008E8C6787EA29F6C77CB2D5CE8FE27840EE
-:102020005E024D88EB9698EEF80AD72FE43FD0E990
-:1020300006DC1F90FAA447267D78CA466FE3822A01
-:10204000C1914C77D0AF89FACD37FB31A76EB1D7AC
-:10205000D7077F146D1C49FA681BB5F3823ECAB1DD
-:10206000E9A3BB8229F4D1C84AED6EFE9E97A1FF79
-:10207000BDBDF4FF5FA9FA43FB1FD27B8F4EF8AAC8
-:102080009AA8FD08CBE38799F2041A1681FC186020
-:10209000CA8FF41BEBA658E48F31E1619437D7EB7C
-:1020A00092A8CF7F98F44EC8ECFFABA57679B4E048
-:1020B00061BB3C9A7923D627E44FED4376F9137E32
-:1020C00018E545708ED06BECFD8770FCE62566FF49
-:1020D000D1D120DA250E531EB228F2A1CEE2659BA3
-:1020E0001D79E4D9F6A5A8E74CBF8919ED0F213C6D
-:1020F000A69FF1D6B3FAC3A817412EB2E3261F8CD0
-:10210000E8C9EFA61C30E9C7B40F5F7B31AA1BD02A
-:102110006E6E8516B3EE4BDCCEECE6764FC2BEFC9F
-:10212000DFDCFEEE7BFBF1759ABF80D3DB3730FE40
-:102130007BD6F14D7B0ADE7713FD89F7979A3F072F
-:10214000F09D26F8C673F82EA2FF17B4EE00D75301
-:102150007F0578D343163FE012C4E7B04B1CBE7135
-:1021600021DCEF2ABEDF8F69CC94E31308EE1E74E6
-:1021700070DEF45F42E396F2755BC6D5ACF3F5E62C
-:10218000AF43BB327BBB38FF54105C62DCB3F4AFAF
-:10219000B6B78BF78F842CF4D9077CBEC8BABFDFE3
-:1021A000801C5945E38FE4E3CF4BE0F126EBFBFFC6
-:1021B0001F373B279DEF207AAAE7F4741EF6F60F2F
-:1021C00010BFDBA4763D8BE2448689F7FB701C7858
-:1021D000DFED82F731B11F8F14471EC0F658F48F20
-:1021E000B3F827C6DC5D085FC23F81810A2CFA9EE6
-:1021F0005DB70BD763EAFB27428B761940277298AD
-:10220000B77FF4C0CBCB70FDC965B04BFE99F63FEC
-:1022100007EC92316497FC0BC275AE7101FE76C279
-:10222000C3D39C6E52D43F49E33EC6EBB7BAB81D48
-:10223000FBD6924FC98ED36E551D68C7997AFDF9AA
-:1022400010B767C11EA9887A7BDA8DCF8B781A8C7C
-:10225000FB3CCDDBCEF1DF199133D1DE4CD82D31F3
-:10226000F2831276D50AA2A3B85DC5BE4DE5A96278
-:102270009FDF087D679980F7571C0F623DE76EDF8F
-:102280004170F879FB14F59D345E2E8793790F9D8C
-:1022900040BF95E895FF8C7440799528049D0B4AC2
-:1022A00072C06E39D02AA948262BEF33F7F976E2AF
-:1022B0008BB8DD26F8F07A41C79F84D6D33E5E7F87
-:1022C000DAE4FFFDD47E7CDC4F5D4FF0BF2DE213DE
-:1022D000DF0BAF37E1FB90E053397CDFC0F8A70993
-:1022E0003F8CE3A786194EB4CBD0AFDCC37AEEEFB8
-:1022F00017228E03FDFE2FF5F370B86A7489ECF790
-:10230000C88A634EA4F7A59D4C4B451F72D865F64D
-:1023100097C364970BFF36C0E342C9EDD3C2717A0D
-:102320004AA3F63E3EDF86E2480696A7E8AF870757
-:10233000F1ADF1A03D1A2995A22D79E8DF78CB4ABD
-:10234000A13CC7C1BAC9EF636C33C67DDDCF2AACEF
-:102350002540AD55C512D7012EFD35FA910BC43E6F
-:10236000CF61F1F88A03E33596F80DF981EEF09D1F
-:10237000F9AD2AC55D286EE3F2CBE45704EF5E4168
-:10238000F191F422B7CF8DF3C8B9E4E7BA1E10F18A
-:10239000A2F9DCBF74C03FB4A3D3D732F2DF666DBD
-:1023A00097A22AD4BB357BFCA576C3A926F2EF56AB
-:1023B000309F067EA25264AF7725F9AF8D857A00F3
-:1023C000F172F2BE5A07E22358C9FDB093F75DE1FE
-:1023D00045FE4BF6A34FA21F4D52AA871F6DACC3FB
-:1023E000F89AC58F5ED3877E74386CF7A38715473C
-:1023F000CAC248E78A46F2EDC0D44973C95FDE2EEF
-:102400003337B43FDE3AFED522281BDB9500861B0E
-:102410003E706A4BB1DE007F5A1E46DBC430BE35CB
-:102420005BC07FBCF85429C2AFDD3E2C80F47EFC3B
-:102430006E37E1F9F8CAEC68068C97B5FDB34D69C3
-:10244000D0FFE5E8100CB2C5FDEB643F1CDC2703B0
-:10245000E9E6381BCA5A701F141FC37195FAAC8085
-:102460001148F8DBB3F37D068EA7473318EE7BECFB
-:10247000974C3A99CFE8C801E9780E539D5898C710
-:102480003427E27F01D3A97C1DF09B7405CE976FA2
-:10249000101D00DF61FC6E7DA17E13E1E3414E1F44
-:1024A000EC1E65179E571C37EECD443EDB9B6E8FAE
-:1024B0003798CF3522DEE0413F7F4C9FFAF9EB0899
-:1024C0001E2127CE43AE34F0FDE4FC7A1AFDDF81F5
-:1024D000A427EB90CF3B441CF89E6C1E3F690D7304
-:1024E000B992FC0486CFC1FE17AA27405FEE08DB35
-:1024F000FDF89D583E0F7DF94392334FF2753687B4
-:1025000099297F7E1CE676809A45F11410C5D7F292
-:10251000FDC59FCF25FD611C5F7B4CA2FD4A531971
-:10252000C921378BC4383119623D6CC3207BBFBDD4
-:1025300067EB776390CFFF4191FE136C57720A28C7
-:1025400014DAB9AB781C7CB6577A495213ED8E6019
-:102550001C2A55DC5FC85168167380BDB2230BF688
-:1025600000E3DB4AA01FCAEBB71AB4A368C31D6916
-:10257000A8A06797524FF2A3EB3E39DA085D5F6D72
-:10258000601DA5A37A8E5BB32478F484451ECD2EFE
-:102590007BC403429135E5B71D92305EAFB9553724
-:1025A000F4EFC88CDC83F17AE37599ED017817CEEE
-:1025B000AF3C7AC2221F92C785F998012CFB56982E
-:1025C000C7315F0CBA63D3009E1586144579B0C23B
-:1025D00038E6C478E5D2B5CB980EFBE42A3AA6E0FB
-:1025E0007E96077DB4CED94532332C70DD7FADD6D3
-:1025F00011E6F19D37687F03713BEA4D2C079D5A28
-:1026000096AF20118734CF051E0BEF267BB4239B9A
-:10261000D1FC113F8B36A2FCD296B9BAF19CC51FF2
-:10262000A1B8E9E1B04AF3AE6CDD45F0A44FF998EA
-:10263000E001DB39E6E8DF13DF261FBC2EF0DE2CDD
-:10264000F0DE1B9E3F09F3789E599E5DA664229E94
-:10265000DF50543AE7E88DBFE796DAF7C7EDAFB041
-:10266000959BB4DB1D484F275BE528EE133C5FC10B
-:102670007D3B0DFBC6F212E37464B21AAB7E36F7F3
-:10268000674AA94C7099FBB3743BDF9FA5DB838439
-:1026900097A5A595AEC1FC5CAD1D689BE945CB181F
-:1026A000E2C5A51D53508EF5B65FC06FEE528BFD8F
-:1026B0007811F1F37EA516BBF69B8EEFC37C4369C0
-:1026C000BE243BFBAF75BE60D25327CAD582845C63
-:1026D0002D2BE5FA20F969CA558B3D49714D0B1C2C
-:1026E000CBEB2E020E934F904F516E84774ACEEE75
-:1026F00002DC7FE0D731689FFD76F36539C8378CFF
-:10270000E8C151CAF9C635658E0BFDA695F77DACBB
-:10271000A0BE027C4E277C0A393CB694997A6806A2
-:10272000D1451DA78BFFEE731D806709C1B984C316
-:1027300079A99D3B7DA73A525F4AE7402097BC1894
-:102740008FF789FD674379DCFBC2CE373F68BD9DBB
-:10275000A11D38E70F992ADA818B8AF768796ACA4E
-:10276000F34D55B29D6FD68618F9158C8506B37357
-:102770009E6F269F9FF63CEF345E6ACA49D8DDC93A
-:10278000E79DC9E79AAC97F3CF9EE79D2F561503B7
-:102790009C3302B24F5513E799AE2927DF65D7F472
-:1027A0003CEFFC12D623F099C32CEBED1AAAB6C766
-:1027B00000BE96C19E401B6FCEE46B1378043DE0D3
-:1027C00071C33C9BCA007EB497F3DA7E308FD9F098
-:1027D000E8223C5C201EE97C1BF1D22A4537627F4F
-:1027E000A5DE4079BE92F9D4FB0389FD8C8F977FDB
-:1027F0008786F2F91F6ABDCC01FCBF39E736B60CFB
-:10280000DAA71F4E6332B43FACDE46FB7DF8A34C23
-:1028100015CF7BDD7ECB3E085C2A267C724F3FE9DC
-:10282000AFB08F1E64B91EFBA8B695A29E3DDFFD1A
-:102830007BA4387204F9D803FA5A199778DF3594D3
-:10284000E3B3FB2A166D937AEE23E05B23BF339F3D
-:10285000EDDA48F5F50CE3039B24C6F19D44178E91
-:102860008C0D069E6BBB967BC98F6AAAAF277CBF77
-:102870000EF8367C9CBFF09CEA2CFC65D2059306D2
-:102880009D3F5D24EFFBE1D65AB6F6D2DED75EF867
-:10289000737729DA3DE7BBAF5593B57E6513ACFB83
-:1028A000AC65970DB4F2AD21F2520CDA47633E638A
-:1028B0007BB27BDA51978BBC14186F30F61F52C66F
-:1028C000441C501B82E579C3597DAABC17E774EEFE
-:1028D000C72C01139CE22A463ADB331EBDAC9DEFA8
-:1028E0000D42BFCEB84AC532530F4591AE6AF912B8
-:1028F000D8911DBBBAB07E362CD69143AF54870514
-:102900003F81B23C1AB778F5B15754AA0ED0F82ED1
-:1029100010FEE8A72EC197944FC2A27B480EE86C28
-:102920002EC8FB1BD648EF61BB1A2383A15F9BC84F
-:10293000AB783429AF829767E78A7AE3DFDA6CE70E
-:1029400098C60B49FAEDAD36AB3FC58C63A4DF6C7E
-:10295000F685459F1D79E9F7CB0DEB39A6F1318D51
-:102960007F7489395FD16EFB39E69734BE19A7664B
-:10297000EC332A2F89973F27FD6AC691FF5436B161
-:1029800096C74DF5B9B8FF7258AA47FB08148C26B4
-:1029900051BCC6D786FE34D8FFF3B0FE6F7D9D6074
-:1029A00087DC5C6639FFF85B83FFB819DF370E2FD1
-:1029B000D70A2E7D7801DF0F10BE2B38BEFF06E050
-:1029C000FD59598A73804B08BE9708BEF839C47FF9
-:1029D0003B3C6F9559FCCF6F7ABEC993B513484FF6
-:1029E000DFC03A4E9559F20FCEA3FD7F517B715E49
-:1029F0009A5C7F73B98FC7B1C439F1DBF173BCAC9A
-:102A00005A1CAF3B71AE47E75E8973C4E157044778
-:102A10005AE11FBE1BDB9BE78853CBF36A292FBA11
-:102A200097734C0DEB156B7F95FAB724CDE712F534
-:102A3000F3CBBF556BD8F07335B5EF486A5F23D63B
-:102A4000B7BC7CDC6EC3820FF038A97D5C2EB189E7
-:102A5000B5F673C709B5D673C7D5E513779BE7FFFE
-:102A6000E5881F714EFB3F1D1FC172E16F8AF37233
-:102A7000930E874DD242E5132E3D7861FF16965B8B
-:102A8000E8FFAF30DF8A724BDEC585F68FF3A3D047
-:102A9000FB66FE04E0F7165CC7CDD355C27F72BE5D
-:102AA00084E92746BA5914FD96C92C2AE3B944246F
-:102AB000A0338C83C6F9DAD06A295E17BF1F51B1E3
-:102AC000DB7E3FA27137DA1709FDFD54AD3DCFA182
-:102AD000DC06F78E979F32D7DD546EC967E8EBF1BD
-:102AE000574FB7E3255E16F8597CCB8F87DAEF5F37
-:102AF0004476D33946FCFEC5229A3791DFF1EDDDED
-:102B0000F6FC8E35544EEC5743D27E7DCF06D71758
-:102B1000E50D04974BE4BDB95648BDDCAFB89EE463
-:102B20008279AE0B659B5CA0F23700D741938E048F
-:102B30009FC6E1EC919FB76C37C699FA7A7E8B5CA1
-:102B40007809E9A2EFF1CEEF779878EFED7EC7F53F
-:102B5000AA59FE6E6D5DC1D79F17F3FFCA53E61FDA
-:102B60005DEC3AF87D1157F27D11B6AED62E7FCED0
-:102B70001BBED3A9E5CFF9F5FFB277F9F317943F60
-:102B80004D5E07DD47D1FD2CE57D949BA7F373A92E
-:102B9000387F8AFB28F376A4F6A7FF7E3A8F5F9BE7
-:102BA000F1EEA0EBD40AEB79D70051EF9B1ECF1BBF
-:102BB000F04DC771D772F886A13CC4F31EA6300D44
-:102BC000786AFEBCA1B9085FD37FF2F1981FFCE4DC
-:102BD000CCC47893C578E63C2FCCC9ACB1E635E4DB
-:102BE0009AF34C97CCF8F4B0E988CF0D7C1D72BFF6
-:102BF000D574CF2BEE571BAD24BF9A9DA69FFDE049
-:102C00006E92677139F463A28B056E93FEA3BBAD20
-:102C100071E3B25FECE67A158A788E97E8775F2DDC
-:102C2000F979E7E85768E27993D82F23BE5FE3117B
-:102C3000EE73F5B7F8D1312927E1473F5EA84D4142
-:102C40003C833F5D723EE3009EC2B42F6BECFE8876
-:102C5000A57EFA745B5ED2A9D567CB4B9A3BFDEC9F
-:102C600079497313F43077BACDAE0F674EC038C9C7
-:102C70006047CA7B14BAD8D7447ED74F69BF9A4DF4
-:102C8000BE13E57BB279FD0DBF78BC56C07FE374FF
-:102C9000CBF98579DEC20A0EC530CE63C92FD21CAE
-:102CA000D6B84FF89813C75BBA5D4A993FD3835F94
-:102CB000B68AF1B7C7F7F1E6E93C1EAD63DCF17AFD
-:102CC00073DC6F37D2B8352BF8B8C97C73A788533B
-:102CD000DD99A0E33B691C2D9E6FB30ECB9832E0CB
-:102CE0001E9718DFBCDF1374469EC3739D66435264
-:102CF00051BEEA6B97D1B922AB606C14EC5370F003
-:102D000088ED283ACCF98657F0FD825F4BB19D1FC4
-:102D100024A43118F3C497D1B9F3B51ACF5B9958ED
-:102D2000D5280F5429AFA505F7AD78FEAE265CF681
-:102D3000754B7E26A7CA67E988E7B3B037460E020F
-:102D4000FE16F0E1BD903530CFDBF17C96AAB23BA8
-:102D5000ACF92C91AF97CF62C6FF168700AF967D76
-:102D6000CBAEE078CDAEE0784D9C03333ABF1DCDBD
-:102D70006A665C85F165BCB705AF3BC43DB733B946
-:102D80002C8AE7FF8D53D3298ED79DCDE85C15366D
-:102D900024ABFA5ACC23E13F69A34A298EEB86750E
-:102DA000E13AF05C3676250C2F2FE9174B41CFAF77
-:102DB00066E92CE0C5B8BFB19901DD84F57BE97CFB
-:102DC0006EF88A8FEB70DEA5BA5B4512B8BECE579F
-:102DD00046795CAB03CE3B300EE9979986F1EC2A3D
-:102DE000E7FBFC9CC643789A5DCACB265EDC4C7937
-:102DF000DF8A1725A9BCF6DDC62D072DED5DB1B420
-:102E00004C3C177C69BAC80712F78A98EC253A3807
-:102E1000E37744F11CAA4361071480A35697E9FCA9
-:102E20007DCFF65B5FC1FB634BFD4AC001EB0CAF8E
-:102E30009528FFEB7A1FC7D3670DC6968360C3A69C
-:102E40000D1E41E730677C1E8AC6372FD943717B40
-:102E5000A0970E05F37AD6C90CCFBDCDFCA7398259
-:102E60005E4C3CA62DFB94F07206CFC3112F45D9C2
-:102E70009407350BF0A1FAE89C7F13E2299DD5C792
-:102E800006C0BC0BFD0E16B3C4A161FDB63C3218E2
-:102E90009BF2CE147A63AB27FCA4AF0BF37C34B95E
-:102EA0002A86FB7AA688EF2B940348EFAC94D3A92B
-:102EB00089FFF4243A7527E58725D36932FE4F232D
-:102EC000DE2DF7B9F6282C10437AEB94C9BEE86ED4
-:102ED00055B228EFAAD54179578C45E91ED31ED6A5
-:102EE0003FD082723326D139C175026F26DE19AB0D
-:102EF000DFBC1CE3DCF559018CFF3347FD66CC8F4A
-:102F0000BA3E9A41F9778B583BE541DD801E32CCC1
-:102F10007B23F3B9B0BC9C05E829B102BA5FB2507B
-:102F200097882F7416ABBE0AF017BBDC996DCDAB3A
-:102F3000EA35AF09567ED2721ED1BF42C84B8FEE22
-:102F4000E7799EBAB8F7A3517E507659A9474F2129
-:102F50006FA715EB832B0626CA8AAF9ED1F9747131
-:102F60006448C58444FF470BB55C6C37AE481B8A88
-:102F7000CFBD68E7813E081F1AF508EA83C6424DB7
-:102F8000C5F6C9F2EA78EFF977B1B540775D28AFB9
-:102F9000288FB080F8B0AFF2EF0A2B7AE4DF4DA8AB
-:102FA000B0E4DF1D75F27B65948B3C99F5BC9FB650
-:102FB000F63AAA37EFA725DF4B630FF2322CC86829
-:102FC000198BF777EB69DD26DE93F1C3C4BDB4C579
-:102FD000FE97BBA46BFA206FCD07C6DDE0B3D187A7
-:102FE000C1EF2F57DFDA954379840AE51136E7F10F
-:102FF000FBCB9BB00926028DE4F6E097425F6DC9DA
-:10300000AEF707A07E8B93E7C3B07C9DCD1B9318D2
-:10301000F7CB0AD93C175A8A7400761FD94BA6BD44
-:103020006AB6AB157A6195D00B8F17465612FE1310
-:10303000F9DDABB03FF3C6A20EF3DC8EFFD03990C2
-:10304000693F1C19524FF9346E2DB5BD706B455C4C
-:103050009FDF4AE3B79AFA5CBB0DCBD306F8E623B1
-:103060009FB9C2326B433D36FB6692BB4F61DE288F
-:10307000D83413F5C6F020D8EF860A71DE54978D48
-:10308000E8621D1ACF278D95D4FB51DF6D199CFA8C
-:10309000DEF761B1CEF1C34EC938EE96658C6D1C7A
-:1030A0008BF833288FCD5800B204CAE0EE1FC473EA
-:1030B000190FDA01C5A817797B5F1DB4817D6C17E4
-:1030C000F80F8E06FA41FB6B943D1FC97C9AED9276
-:1030D000F3AD409467E2BA93F3DCCC7CAB2EC5C869
-:1030E0000CA4807F76D91A0FE56BE52EF7A09E6CB5
-:1030F000D6C2345E72DEDB965C3614E14ACE6B33A8
-:10310000F3A6CC7C2973DC7FAAB0E7B5B9FD5C6F70
-:10311000C193F2647E5AA1F2EF5268F6FC3633BFD7
-:1031200006DB537E4D2EE3F935FE7A86FDDC50C674
-:10313000F611917F969C570572E86744573DEC2342
-:1031400046764673B1C81B60DAE665681FE1F96D23
-:1031500020857D050201F5A00BF413D62BF2EA0AB7
-:103160004CE5F9BA76D4B4E2C8CB48972E7F5CCE52
-:103170001E22781372F697580F72F65756397BE66F
-:1031800090F108E66F6E91381D6E01BC3F91823E52
-:103190008E5448828F53D3CF1F04BD361646DEC2ED
-:1031A00079B41C7EBFE342EDCCE6849DC9F1D847DB
-:1031B0007626E0E377840F21A7011FBF473893F1FC
-:1031C000003F9B506E58F24C3FC57EBDE59926F7F7
-:1031D000BFD87BC212C80DFE1D09ED2F0857D5447C
-:1031E00095EB5D218F13F76D2F4E5E773A408E027F
-:1031F0003C681358DBFB2AB99C2B98ACFB2A492F5F
-:10320000F3FBBEDB82FCBE2F8B69A4F78F64EA352B
-:10321000C8A72C7FDC39E66B14F9B47A5D84E4FC32
-:10322000DC73B4DF48ED0B268BF5E6F727FDB14DD7
-:10323000D2EE4B9713E573ADCF53A98DAA447F53BC
-:103240008FD0F712B6E43B54039676CF44FD5BB8BB
-:10325000AE2DF91B69FF5A80E024909BB31CA7EEAA
-:103260001E21513EF0D3523F787AC0634B41D7457F
-:10327000023F60C5523D7B57F35BE31CB595F1B847
-:103280008A884BFCF323D67B4C732B7FB202E3F18D
-:10329000A61EC378C91329E82224C691DDB7DAF443
-:1032A0006472BBD24A7E0F645EA5381F107A6F81AC
-:1032B0009BFB51EC30C067D1AB05934315955C6E19
-:1032C0001992451F9AFA8F6A2CEFDD7E7EFF847576
-:1032D000DAC731D7B942D0A9392FD0EBFC4A1EBF8B
-:1032E000585069A95F20331EEFE8B0E30BE0594462
-:1032F000F03076A217781E49094F971D9E1571BAB6
-:10330000D556E078A09757E2736B08E82E057EC784
-:103310004C08DD84F50A33B68EC83BABDD5A8FEB23
-:1033200030CB16BBF5B64ABB3CBDBD92CBD3359571
-:10333000244752CFDB50C9E5629F7D3FE03CF9FD59
-:103340002EFC3505DFB4743F99710DB09ADB6DDC4E
-:103350004EFC5930EE1CFCC5F9F9C661F5A4E79E98
-:103360001376C8734EA6607E0DF0582055DE4FAC24
-:10337000D2B43BA243102FCFF46277C4DBF5925F47
-:103380007F25DB997131F647CB942319647F9C6EBE
-:10339000CB403DFFCC89504AFBE3B9DC9D4352D979
-:1033A0001FFB7AB13F9EAE14F6C7072EB2274A3EE6
-:1033B000E4F647C9873B65B423FEBD52A5F5149FCB
-:1033C000E8907580BB04ED0F18679FB03FB03DD902
-:1033D0001FA777CA0857F1871DD4AF04CA687F14A6
-:1033E000F7627F001432E2E1E992963771FF92D7DB
-:1033F0005B355EFF85956E8BBA3B28CE63F66BC955
-:10340000DF98A1D37EDBE9675A3197BB897E9CDECA
-:1034100093DBF546676572D5D66E58D73696B99365
-:10342000F23295FA87B16C180AE56BE10736906EB7
-:10343000EE9C0D306463BBFA47BB51BF186E1F7E14
-:10344000DFE0B3F4A5DCDF59C37CCEC90979444B76
-:1034500007D08C9018CFE5F13581BDF4A38C2CC238
-:10346000E35A9F19D7D9593102FADF79E548BAFFF3
-:1034700013BA170682F2E44E99EACD38D02B83199D
-:10348000E5E903FFCEAA86F1278AF141DF69B74358
-:10349000FB05C21E2B97BDD4FEAE7CDE7EB271AAA8
-:1034A0000ECBC5DD2E15EF993179837C0BC66FD11C
-:1034B0002E81F6773D1B29F3407DFA118004C77BEE
-:1034C000D745710C0DFE21FF4EE86C277C669C7081
-:1034D000D9E21BE920E16216FBC5955466F2927EA3
-:1034E000A9E493F9EC110F9A21E211D7B0BFFB0ABE
-:1034F000ECAD336CC3565CA37B54E8C5DDAC677F91
-:1035000033DEF0FBF19A7706ECE348A74EFECBBE24
-:103510000AC035ECD3BED6D699D720DE772A14DF81
-:103520003DBA3E83F669FFBDCA2E8C2B1D053EE5D4
-:10353000F1F3B52B915EF7679A6516C3F8DCFEF8D8
-:10354000F70A07F07A515667043E40DF78FF40D112
-:10355000DE68E5F56699DDB512F337F60FE6E51995
-:10356000337EBA07DB63C637F9D76B8F7B53C9CF7E
-:10357000513355DB3D8F5945B7723A3E473F90F77F
-:10358000D7CC18D8B35F5A35F7B3F62F0110C7223E
-:103590009EF4C21930FEBEAEDBB68E81A9C64F596D
-:1035A000DF41727440F79A54723F3483DBCBB1929F
-:1035B00028F95DE0CB73BF972907318F751653C784
-:1035C000A17FBF63EA33FF710DCCF36AF1A871727A
-:1035D0000ABEBE61C688A475BD2E2F47B9F4D1FBC3
-:1035E000F353C981E64ABDC2BE1E7E4EDAB45321F2
-:1035F000FCD7FDC7278F60FE43AC6427C5F1F6FDFD
-:10360000C1C1D06FD93786DBFF78534FCEE913F8AD
-:103610005A27A6A03B806F492AF846CF643C4F74D6
-:10362000BCB614EB93E15531DE0DF08299154039AB
-:1036300092F6DBEF77605C735FB783822B674EB4E3
-:10364000C948822D5D234AD16C9D56754C46922AFD
-:10365000F1DDBB198F80F50DB28DFF2676A5DBCA93
-:1036600037D40FB09517D70D49F023C3FB4057D877
-:10367000CA6EFFD5B6729015DACAF3AB26DBC62B3D
-:10368000F3856DE5E9FE99B6F695EA3C5B7966FE51
-:10369000625BFBEA40ADAD3E523056C1AB7C409719
-:1036A000CD88AF8C4E8DF87C4BD76D3EA48B58499E
-:1036B00084FCEA23991DB918B77EA597EFCB75CC8A
-:1036C00090857E07D308E524E8F38DD989F6C111EA
-:1036D000DDB6B8FCCF67707DFD84A0EF73DF87E3B4
-:1036E000FAF97CEFC125EBE1D957DD4672A965BE39
-:1036F0001CC57B554DF96F78F1FED82BF3793CA1B1
-:103700002517D6E9A5BC0CE2AF17175C3714CFD745
-:10371000D2F3F50128FF4DFD1DCE8FB2E3509FEE91
-:103720008BB22BF09E19946BC57DB370017F3F5A0D
-:10373000BC5F854FD0DBE5167C25EBE3A067EC4B47
-:10374000E036B0A97FF2D177FCE617F0B84FE9E98F
-:103750006829DEAB9EA9BD70905F9FE6F2E7D59227
-:10376000DFE5F4A2B7FFDDCE0FAF133FEC3B31F73F
-:10377000ACF2FF370D3CCEFE548387C5607DEF363B
-:10378000F8E8F99F0D7E7AFF7A834ACFE6867C7A45
-:10379000C61A0254FF6643113D0F3668F47CB9A186
-:1037A000829E871A22D4EE570D35F43CDCA0D3FB61
-:1037B000F76770BEBC54E0D1F2CDB842E44587440F
-:1037C000789D8F29BB933ED464AB7C07BCFE76C644
-:1037D000849E78BD583D122B691F12E17A2B251F5C
-:1037E00039679AF76EB99D3C4B27991F87CF857132
-:1037F000BA9C449CCE8D264D7F82F32F7D09E77EB7
-:1038000011C7D99FCD6A9EE0FED42689F48D6F2C16
-:1038100097E7F7474224CF078E4D2DCFF37AC8F3B1
-:1038200065A4B7D8218C9F627A110AE395387FEAA4
-:10383000B888D12FEFAC78A0734B130F96FD1A3ECA
-:1038400033051F9C0B0FC9EB9F56AC8D9E3981DF52
-:103850004771F6EFA94746777FA1616CEAE9020E4E
-:10386000EF8EF7E7F6437BC58D4129F2DFC1702B60
-:10387000C2FD66665EC19EBADC9EE3FCA6A49DF412
-:10388000FA5D713BE701B26392DBC1CF41C203EA4B
-:103890002D0B1E52C881693353D04199FC6CF746F9
-:1038A000E8BFBF9B51DC4C459B1AE07F46E1DF6BD4
-:1038B000D8FFA183F07CC623917C74AFBBDD83313C
-:1038C000EEA7BFC7DB19D512DD63C838B04F453B43
-:1038D00035D8AD0FC0EF8E15C52A9DF89DD0D09478
-:1038E000B181340B1D8414BB9E444B35AE77282820
-:1038F000D63FA97C79A2BD8CFB3F2251CEA3FBD73A
-:103900008B705D734FD533B540C459BD29F1B45A9E
-:10391000B2C4DD1416D83A318FECCE8397E3F9CDDB
-:1039200028169589AE0CF2BF4D78656F84EEE79945
-:103930007EFAE792B60AE7EB317E9D46E76FCCE16F
-:10394000A0F3B7F585FA2D33E99C3EE97CC6F7F282
-:103950009F25D0695B1D2C86F68591E522FC25EF1D
-:10396000D7B8A2CADBB1BFFF6BFBF53B25EBF70273
-:1039700046ABD3C89F3A03FE14DE476952F83D298F
-:10398000E3DDCCE81E0292E5A3DD76A77C7500F7A7
-:10399000FF4719FF48FED15A5824FA5FDB851CBE49
-:1039A00007E5303CB73BB9BFD5DCE8F6B5E5A0BFCD
-:1039B00095653840717D96362CCA609DAD33B93E11
-:1039C00077B31BFA45C69C057EE19F38E3FB9EEB6F
-:1039D000237F4394BD2EDDF109FA7547E428C6DD47
-:1039E000B68D7DB06639E26FAC879F7F2A31750E48
-:1039F0001A683E83E558EEF1CB4C398971DAAD6037
-:103A0000CCE039EFDDE21E6E66C061B377FA15D9FE
-:103A1000EDB59FF411DC2E9444E8B7E6B8A2988F78
-:103A2000A3A2DC02B8B7FA1DC45F9B542E1F3679DF
-:103A3000358F2FC5FE6E417CBB7B9F5FCEDBE4C321
-:103A4000B8F74EAF83F877ABAA6CCB83F2562F371B
-:103A50006A9B544745AAFCAEEE99DCBE8226699467
-:103A60000F159C4BF64E6FF3B4887D37CBE905BA42
-:103A7000467CA60622B89E266F8E84FB62D6EF9FF8
-:103A800029097DC5E3CADB84FD949EDF1EC3B84EC1
-:103A9000F3E05585882E0FD84327E1BDA7A09DEC04
-:103AA00027EFE52E3D15BC27C478DB9C810AC4E7CF
-:103AB000B64C0733007FDBF27A39DF12FAB2491DC8
-:103AC0001721FA067C8C927AB67B5EECF366E74EA1
-:103AD0003FDE5BDB366A21E5856D1BCAE5F3EAC391
-:103AE000BFDED388FE83FA5DF609F24D8E42FBA657
-:103AF000B28007F55CB34FF1615C607CCE1D9EA087
-:103B000045CE25F38973F0DC1ABC4F78A6283D809A
-:103B1000482F930FD377459A032077F3306FA9DEB0
-:103B200067FD5E00D8DD9F21FF9F8B4E55A67B1061
-:103B3000BF303ED1516FFB970C8F1725D3B8B3B46C
-:103B4000CFD66B527DC7645415C7AB4937CE73D0FF
-:103B5000CDB9E0B7E9C5DC845E1C5875D92A3C7F35
-:103B6000BE9BF1FACB0EFF8EFCF4E4F2D7E5CF2634
-:103B70006527C9EDA6912EA2A7E4FEDBF2383CEF43
-:103B8000CC3C29E20431E2DF6C0F8F37DD53D43FA8
-:103B90002D955C2E1BAF8FA9B2D81BD9A5EDA46FB4
-:103BA0005D558CC76BD5886F248CE3ED94814601FD
-:103BB000DF8E2FFE744CBD783C2A3BEB5904C6CBFC
-:103BC000EA94893EF1E70B9083FD841CDC32FC8F84
-:103BD0000CF347765CA10478DECA4781B3E993AC65
-:103BE00029F678D285C68BAAAA441E431A4BE379DC
-:103BF00043552185F2751C5CCF6AF0DF2021222419
-:103C0000B1FF83C451948AAF789C2C670923B919FA
-:103C1000CF5FC1EFCFE0383A237B042FD062BBCB1C
-:103C200057737B2B97754B781E381CB37864A47739
-:103C30002E3FCFB05C07E5EFC034987F22190ED23B
-:103C40008B3F1C7E540AC2DB7B8A578D457C24AF98
-:103C5000636595887BC5D771763C9870F6359D9ADB
-:103C6000FABBC9C3F5B1068A3B0D8DE5A4F8679987
-:103C7000BC81EB63C3ED437DDDA4D43F8E65E81DBD
-:103C8000A1786952FCF3B3341E1F95EE603EA998EB
-:103C9000E29FF9B84F6B597A00E393FD14DD83F589
-:103CA000192315FABB0C60774FC4F396845FAE7A84
-:103CB00079BEDC5ACA2B7C1EF51AB43BF0C5D9E597
-:103CC000D193E7D06B2D9D23BD145FF7D466A03F41
-:103CD000FE947FC461F46FCE7878BE97D9EE40D25F
-:103CE000F74F9A859C3B5C25E2E8699FC9D87F9A8B
-:103CF0005F5530AF2EE4194BF2BD494A7D5ED05975
-:103D0000C5F5C168F5354E67ABCDEF96AD26F9FF29
-:103D10004EA6A0DF3A7D31C59585BDC7344DF55D12
-:103D20009BB0F34C7DE9577CC6CD388EC8B7EAB15D
-:103D3000CE033731FC1E0BF35BE2B32370FE7EF142
-:103D40003C3BE2E724FBAE377CB608FFB8C91FA2B4
-:103D50003C8D3328B3529C9F984FB0530FA29C9A2E
-:103D6000D061972F19F976F9B2D5514F795FC6D541
-:103D7000CC877921AC2AE0B7DAC960AFFEB28ACE2F
-:103D800077ED76E74DD58C7F673B5B55304E13F66C
-:103D900004199E4B28B93AC3FD70F90367DD8FB64D
-:103DA0002AAEF79BF39747D0AFD931F53B8497F113
-:103DB000153C0FD56C07FAF29D2A8B7F63E6299C90
-:103DC000F7F7947C0ECA5F3CDF3852CB9495FC7BAE
-:103DD0004AFEE5F43DA5A73CFC7B4A0732F50CB44E
-:103DE000BF2EF47B4ACBAB39BD863CDF7E71DA084F
-:103DF0000B9EBA74CA1F71F94FD1F9CD34916F92ED
-:103E00001C2F72BBEBE9BC2D5652BFD81A2F36F1CE
-:103E1000D726F4F66F4A74CA0BEAEDEF4198ED101D
-:103E200063B82EB788876E29594FF89F5B914DF183
-:103E30002845C4A35CA774CA038E8ED733AA2DF875
-:103E400077E71AA4EF32FE91F1FBEE9FF3FBEE1938
-:103E50001B5908EFB787BE1847E754A1581AF1D984
-:103E6000D4D301FA5E7599FCD8D611507FA053A126
-:103E7000EFC81F989A9E837AEDD34E6EDF661CB80A
-:103E8000EAF0DF41B9A4B316630220770096FE3D45
-:103E9000D731F5B4E36BF99913D0CFB49C9798E37D
-:103EA000FEBCE110D1C7930D1DF4DCD710A3674B06
-:103EB00043173D8B142D8CEB29EAA0B34B36E90454
-:103EC000D45BE0287A17FA5BE8C1375E1F5F4DFCD0
-:103ED000D7616B9791DF656B077E6E11B653FC1C43
-:103EE0009F2EFCCE188C3FBB8B6D96D4FF51F26A8F
-:103EF0005175DFC8AB1BAB079E4D5EF1F3D45097F5
-:103F0000F8AE58123FFE5795CABF8F64F2A53857D6
-:103F100035F5F456FC15F46953D677B87C8BE76F0A
-:103F2000F0FB8AE677E9EF78E5E45ECCEB697E5B4F
-:103F3000D41B9FEFC5F3DCC4DFCDF8E32ABC77F2D6
-:103F4000023AB76087BEFBCAB3ABF0FB410B6BB262
-:103F5000150DE00BE3016C76E2BE8C99D7988CB717
-:103F6000DF543BCCEFD0511CBE7904FFFB06C9EDFA
-:103F70005EAC167E9B6AFFBB1FE9BDDC137AAE9A6E
-:103F8000CB8B5F0ABC6D75F13C85DEEE837CBFFA9E
-:103F9000ECF741DE14F5E7BAFFF113D1EE0931EF8A
-:103FA000B04991FB51FE987F97E349F13EFEF73807
-:103FB000FC2CE5386D42EE5E3ECB27F653A3EF9F17
-:103FC000C1788F107D88BF9F60D64FFA305EFF4F5B
-:103FD000541FFF3B093AC589CCFB786DD51D7B1B6F
-:103FE0002DDFFF6A8E7F5791E739FD51E02DF9698A
-:103FF000DE47897F3F8A1DDEAB59BE1FF540F59B2A
-:1040000027C5F7AD9EA6F58A7B38DB70BD03E9FDB9
-:104010007E7A9FF43D81A75E39B8577C47F179825B
-:10402000BB3EF93B5DEFEEB57E1F615BF53BAB44FC
-:10403000FB97683CF15DAF147421E8F6E85EBC1FA5
-:104040007A1EE3BD46E389EF72ADABE67CD41B3D3F
-:1040500043FB23046FFC7BC5B51ED42B897BFF4734
-:10406000083FE781AFA334AF6ECECBF125BB39BF9C
-:1040700098F964265DB0597C3F3656C7F3744F12E9
-:104080001C2BFA0C0FA7089EA47B48E75AC7E385B0
-:1040900091CF080E7F3C1FF94F34CED784C7BC3F69
-:1040A00096CC1FFD6649661EB46B16CE931BFF6E41
-:1040B000A77B561FCC0BE366D33889EF81F69F951B
-:1040C0005AFE5CD0B84C3DBFFC12B3FCFF0015C8D3
-:1040D0004EA0007100000000000000000000000081
-:1040E0001F8B080000000000000BF3176060F85100
-:1040F0008FC09C687C5AE3BF4C0C0CFACC0C0C971C
-:10410000D818189C39191884F8C833E7229ABE7B4E
-:1041100040B366F030302C636560D809C47A5CD84F
-:10412000F5D90822D847817E5F01C417E91C06A390
-:1041300078F0E01A11068649A208BE9E18AA7CAD46
-:104140000882AD2345995D4E40FD008850BECB806E
-:1041500003000000000000001F8B080000000000AA
-:10416000000BD57D0D7854D5B5E83A3367CEFC26E3
-:104170003949069884104F42C0A84007080A1675AE
-:1041800012C146E5B663DA6A6CA91DAC527F61B410
-:1041900056B956CC4908C92484101015A9CAE02F75
-:1041A0005A6D53456B9FE5DE09508ABDBE277AD50F
-:1041B000AAD5DE5829AD566DBC9692BE8770F75AC7
-:1041C0007B9FCC39273393A14ADB875FBBB3CFFEFC
-:1041D0005B7BFDEDB5D75E7B8FE27041F509004753
-:1041E000F1DF5900F7FB01605C3A9DF9BD2F5FFDDF
-:1041F000781DFBDBEF0E3FC89299BF985F119B962D
-:10420000AE3F0724AAD7F08BC57F0456EFDFC1A9C4
-:10421000B9D9A79D0543FE30CBEB9213B09D1BEAA5
-:104220004BFF25C8CA871DE16E964F1D760480F5A9
-:1042300033039CD80968A006A2D3D977F9CB45608F
-:10424000EADF9E9EB949865429C0AE95204759BDE4
-:10425000D505A72D1E0C00BCD092FACBFE290091EB
-:10426000D449B2C6FAD9DDB297F2FFD6B2EF2FFB2E
-:104270005D003128A6711AE67F242F61ED76B9A082
-:10428000B99FB56B8848AE25A6F162623EBBBCA261
-:104290005CAD97339617B072F6BD217841C6F2181F
-:1042A0009B11D52B16FD0C0F3AB19E06437E9AE763
-:1042B000E1A68CF39C20DA19F9BA413EDF9D6F1D0F
-:1042C0003A1FE99082A2A81BD3C3D56F22BE073C38
-:1042D0009206550CBF83E7117E53885FD6C5A1B700
-:1042E00039BE777DE208B7327C3778D44098E54113
-:1042F00066F460E50D0188105C324B191CE70BB8C1
-:104300002F166913A644178DE832E06174098C0DED
-:10431000EF599B1482D798E700CE338F76065DD98C
-:10432000D740B480B583CC7C301A3F6CBCD9C70E63
-:10433000A781D7E8FC81BFECF700FD3BCAFEB75070
-:104340007DEE2FFB6BD3F9B386F759F28CA3C173C3
-:104350002A8317FFD43095FF3C689457F1721C27CD
-:10436000D1A2FDB986F15F5F0BFCB986F15F6F8B5F
-:1043700087F23D2D2AE5BB5B42944FC8AC09A3638D
-:10438000A207923A6B5F1C61F54DE315CD65ED4CCC
-:10439000F01584554BDE5F1BB2D4F76A9AA53CA199
-:1043A0005DEF4832BA774D73249D12C2C164E44474
-:1043B00084C3432903F7D5109B4F0D6F026B5DDA61
-:1043C000AFAA119E179DD0C6F2855AC47129CB574A
-:1043D000869C900CB3F10B8700587F8995001B5881
-:1043E0007F3D334F755CCAF2DDF3DCAA530548B25A
-:1043F000FE136ED6CF9194B60AFB99AE84B11FE836
-:10440000937F8B78F2B0FF8E56034CD694B71D8500
-:1044100000553AFB6E9E9F5B0FA15C17CDB57E9F4A
-:10442000AC2DBD1658FDC960FA5E95A6A731AE91B8
-:10443000B78F671FE78415B6FE6DFD566A83F5EAF0
-:10444000B474BF27C050AB1AF867EE37D220219D55
-:10445000C2A025671E3FB8032B3E2EDE3F3B8DE7F3
-:104460001E17D78376791B0407E90F90C74184C1D3
-:10447000A5698E6437EBA7BBCA41FCA3AD8624EACD
-:10448000ADB593F6C531DF5DA5686D2C5F55BBA753
-:10449000599A01B066924A7CD7BDC30D6D610E4733
-:1044A00090F169A5C1A74706EBAB910F25086F6096
-:1044B000E555DA8156ACAFBEEAD35C7347CF0F56F1
-:1044C000F0F9539ECD7F08FF9833BADF5FCE5122BB
-:1044D00051E45B1D926E064F574D5BA3CEC6B95794
-:1044E0009701E5A77B65FF6B88E7C4140EAF7DDEFF
-:1044F000959AB204F91ACCE3B3F12A6B2EBC1AE7F1
-:104500006587C3D017DF6F51491EEF6AA9A5F4DE96
-:1045100016B51FF5C45D9F3833E2F77C89EBE7CD14
-:10452000AEA803E1D3E739920F92FE896DBE92E502
-:10453000EFF9EEF859B80E5C3FCF41FAE5CF3D1CDC
-:10454000DFF7487D1703D55734AA6F93FF7BE54803
-:10455000DBB758FD7B42A5A03379AE74ED3BF74441
-:10456000EC6F45F54C9DF577CF0D1BDEC6F695F348
-:10457000A66A4ED67EF2DC036FB2451CEE3A3218C4
-:104580008A0630CFE5BA72C5F8FE1AC62713B5BE43
-:10459000EB70FCCAB98A96AC4AF3650584699C1332
-:1045A0009AFD9052C7E6CF8A6B72F3E7F1D3037F8F
-:1045B0001FB92A47B92A4DC3BD59D82776BA2F92B9
-:1045C0001CC42F23723597CBD513A7733A1B727572
-:1045D000D7A4BE778B58BEF71B9C4FED7C5E35F79A
-:1045E000403DD2B587C94F4908A0CCAD7D2CB17CE8
-:1045F000EF122187730F484B59FB3FBDE2D300E513
-:104600006971667D9D8D9FD3A975DC7B6F70344485
-:1046100059BD5F5E3EF58F6E1C6FB1A2A19CF5CABD
-:10462000B534BEF65D45D34DF4AC5CCCE489F157AE
-:10463000E50D427E6C7235D6F8899624BCC3E468D9
-:104640007D4B08228C6EEB5A3492AFB542CED01619
-:10465000853296177206B5B3289FCDFE046825B93A
-:10466000F368298831FAAC677D43397E4F4522F3E0
-:10467000014A50579D4EE0A41C6C6D5F37520E11DD
-:10468000C6F4D02B89BCFE473DC2C653C33CFF6C69
-:10469000EB1FF5554C08D77B797E87545BAFCF373E
-:1046A000B7DF43FD1BF5593ED55063EA0FFB9F660C
-:1046B00086C7518FF58DFE5E6F2DAFD7D9F8EB44CD
-:1046C0005E692BE6F9E3DC7F8FD41F624C0F6B6CC5
-:1046D000FDF448024FFA7F442281F438774AEF46CE
-:1046E000744BF91F228827A3FC07ADFFA1EBACFE9A
-:1046F0004710BD4B627498B520560E8CEEFEC61462
-:10470000A029B5DE86EFF4FC5EA4F905A6F1FC7DD8
-:10471000AD9F4410DF46F9D352412BE21BF92630FE
-:104720001E20444202B0E9E73D573E8F7FD79600F6
-:10473000CC63E3687DA0B13E1C357109F71DA1C5AE
-:10474000F2018B3C08BE63F03D2EB174D6FCD8D785
-:104750007029CC009F6E86CF187F2C780D38B2F36D
-:10476000271FDFCE470DE7CC7D613E932FFF3E57DD
-:10477000D8ADE13C5409F5780902C5F45AF1915DD0
-:10478000442790FB436847DBFB2D59500E49D33C2F
-:104790003F6B7ADE85798EB797CD7465F957CD7802
-:1047A0007C1CEBCD19CD77C6FCBC383F403B98CD87
-:1047B000AFCE3CBF279B717ED9F0669FDF3A6F5F1B
-:1047C000733483FE3DD321F6BB67CEFD12F6CFC610
-:1047D00003D45F5E6D88F4AF8AE3B1AD66D1915DBD
-:1047E000CDB8B5CD369E3A9F8D577BFCF039161F5C
-:1047F0000798FED2583D4738371FDBE5D998B71FD9
-:10480000E72D211FF1FD807DDE008C8F0AFEFF9DCC
-:10481000F7C732A7E70DAC7F9DCF8BCBC73F685E54
-:104820001F3F5F4AF28AF038393F8732F1D73B9217
-:1048300066D9E7DAF93ADBBCFE517C3A7A5EB9F127
-:104840007CBCF550BEFAB5ED551FE1B1F732BE4F55
-:10485000E8DDBB90FC0EBDCF9F3D01E1284C9C02E2
-:104860001166FF4EC5FE597FBD867DB1A96E8CFED7
-:10487000B97D71670BF4B74F0178AA7090F6C30C3D
-:104880004E6ABF99D99F49A6E0EA5EBCC1BB848D40
-:10489000B7F98A0D5EF42BF50A7BB1EEC507D69FFA
-:1048A000C3F039E1F292994EC60ABD5EE3FBF6E72A
-:1048B000A6B2EF9B2E13DF85FF8A7D7F11EB874425
-:1048C000FD6C70952983B128C90B83CB847FA3FC31
-:1048D0004907B74B9F403BEB44DCCF703BABCCD799
-:1048E000B704E95BB859D1EE9346F7FBBF853EBDEF
-:1048F00013ED3436DFBB2EEF2847BB6AE7D653777C
-:104900000510AECB80F4F989C987065C1A8EAF4BCF
-:1049100088E7275C60D859B4CE975F66D0B5493A2E
-:10492000BB86DA093B8BE7BF3FB2AE7E9DEC968A31
-:1049300018CF3FDDF6DDFA55B2A95CFF767DA422E3
-:104940005DFE42DBB5F5B8EECEF2C4DE98CF483757
-:104950008BE9BD550C8E59B2E68C23BF6C0A66B448
-:1049600017B73DE7694E32FC6EDB3A75F2E519D6B2
-:10497000114645A2B3919FBDD72A674F20FEDC8820
-:10498000476EB7F630F462FD504C5B85F89CBD175E
-:10499000C2B81FCDA6EFB2D13174B755DFCD92ADFD
-:1049A000F33A5EF3F90854BEDF16FDB375FD250733
-:1049B0009F8F13E568B6CCE5FFD3CE278578E276E6
-:1049C000C46F32F5FFF79AEFAC001B27F8D98F13AD
-:1049D000B28D93AD5FBBBED21B4092D11F5F0E6103
-:1049E00084A778411CD08FEF0CEC0BE9CCDE93D57B
-:1049F000414A5DC1A190CEF4AE12D2CA307557843F
-:104A0000CBF03BDB1F09F9E86C25BD3A92EF6A4514
-:104A10003DBA0EF3247F6BA87CC3487E2DE56F9BC7
-:104A2000C4E5F304E7ED03A887AB51D930B8D60E3F
-:104A3000BCDE8C7E80D2DD81309A1AA58130A01E2A
-:104A400036CA7B07DE0D79D08EDB1D002FE3F7120F
-:104A50003502E6F6EB06FE1A525979409407825168
-:104A60004BF9868193CA420C453E51EE0BC5A8FC1A
-:104A7000B68179651ADA31BB032A7EF757C469DC3F
-:104A8000B37F718D83FCB18B1C49B7495F2516CD6F
-:104A900022FDBE588A9DE464F4A8FF458F07ED8788
-:104AA000C4EE6913F03BD93CE44F92FF2FEE47313F
-:104AB0007B94ECA0807AE014412F679A1E3D785ECB
-:104AC000417E607E4E9110E7147A432A85E3EB85A0
-:104AD0009C4E8CA3D3FE676ABF37EDAFA6FC3E4B5E
-:104AE000BE404D46701F2D07997E60EDFD113D8241
-:104AF00074572A78DE1908A7507F6CFA0684116C67
-:104B000099E113EBAF9BC7F21AD23F4AEDBBE6F037
-:104B1000BC128AE9984FCCE47977453C85F9352772
-:104B2000F1FC2683CEF088950FE04F44F7AE91BCA0
-:104B3000B70DCB1306DF80BF0DCBD79CC1F56CB989
-:104B40005CBF13F1BF69A0AB6C29EBBF08F981F51D
-:104B50005FB4384CF432E872A7E6A0F5D6A0CB9D3E
-:104B6000DA2C3A279859C4304113D2881E334FB8F3
-:104B7000DEA1E279C7298EE483129E4FF5780759AA
-:104B8000BD4DB5B3A8BC52760AFF00F7873F28FC9D
-:104B900001D5CCBA40BBE341B15EEFBC7D6A11B632
-:104BA000DBB9F97F11BDCF741653BB35B5FCFCE6FC
-:104BB00019B64EA39FEEE9160FA53F62FDC598BE3C
-:104BC0007EBCC543E90F5A544A1F617A1CD31E5656
-:104BD0009E42BF032B4FB17CFFA0A311E5FFF61649
-:104BE000669AB1F6B7B5783E96A7A0BF42A5FCBAC3
-:104BF0009610E5BFED685AE1E4FE14FF3436AFA726
-:104C00005EAA21FF5EF875473489F356A174515DA1
-:104C1000FABB819F6F3B1A5622BFFE7050A67140AF
-:104C20001EEC3E2573BD36AC37E37599F7171CDCD7
-:104C3000707E3063BD4EACF7D87E0E377852BE2CF6
-:104C4000FDF520BCD3DE12F085522559FA5B8FF5B5
-:104C50001EDD2FE00B24BB4FCE5CEF0E1CF7E4B73C
-:104C6000047C15C90DE7651EF7FBD89FA784DB2BD5
-:104C70009F437F461DAD035B25933C6F5CA24B0EAB
-:104C800046674FE9601CEB4DAF8B4BD56CFCE025C4
-:104C900071C9319DDB190E96F7623F2C3DA59695A3
-:104CA000B37A1BB1BCC0548EED597AD2345E1EFC6F
-:104CB000A6B57C446F378361A7A6D0D91AFA8A3586
-:104CC0003FD5C1F5E3B3CEDFD623BF4F5578F97F8B
-:104CD000631EEDAE45B6FA3E9EFFAD51BF90B7776D
-:104CE000C83CEF29E1F32EDCEC49A2DDB57E61473B
-:104CF000E8D2407ABEC5E7246A316FCC6FFD399B9C
-:104D000043979AE653FC85BB6B2F9D967D5DF16AB8
-:104D10000E8898D6DDA97DD32052FACFAF5FBE6A48
-:104D20005A37705D9920D6850973F9BAC2F0A67317
-:104D30007B95E36DDD1956BC159D69C5DBBA33ADB6
-:104D4000782B3A2B37DE7E29C6CF863F367EC43C91
-:104D5000FE8673ADE3979C671D7FC379D6F14BCE7A
-:104D6000FFD4E3A7CC7CD3576F1D5F6DB08EDFD728
-:104D7000601D5F3DFBD38D6FD0A76BE02EEBBA5E5D
-:104D8000170533FD12035D21CBBA1EE6EBBA51BE07
-:104D900066E0A7215CDFBDB8BEA37FA696AFEF3368
-:104DA000DFF928847EFB7567EC09E13E631DABBB30
-:104DB0006F5A7ADDD879C68D8E4759BFDF3989AFF2
-:104DC0003303673CED41FDBFA696AF3309719EDB0F
-:104DD000DD923A788D2B3DAF828497F67B467EC478
-:104DE0005E82DFD5231F266A1DC25E2A6B8B305B75
-:104DF000D473926CC9774DE3E537B797B5E9E84BC3
-:104E000091F5325C87FCB5F0E76919F65BC6F806E8
-:104E10003CD9C7E7FBE2F4F8936DE34FB68C6FE43F
-:104E2000BDD379B92ED734203C9BC4BEF906F9779F
-:104E3000A45F8E1F7CD3DB223566F8783E0D1FCF32
-:104E40001BF0DD2ACF68D06BFE9EF09D66C3DF6944
-:104E500036FC9D66C1DF0A79EE31E1CF5EAFC7C691
-:104E60009F5743E426791CCA1190BD199755711EAE
-:104E7000C4FBAB93857CE1F818B7B344494EA9E273
-:104E8000E54D6C5D5B2C8B7D98A8DF68CB1BF62B0A
-:104E90002E4747C90F93D97E5580EB6D6677841FE7
-:104EA00024BD1E26794AEF3BB81F4396A39168069E
-:104EB0007D7087CCCF872535DC8C70CA0185FCA836
-:104EC000D9EAF7C992B0AF75CBF94E110CA59C0881
-:104ED0004708283E090E7F59BB60FA683814391A12
-:104EE000C3719CAA02F7B171DA8B2FD4CC714C8FAD
-:104EF00018F08422048FA2727814391CC9E407BE0A
-:104F00004FE67E0BA31F06A1683F0468271AF0AD89
-:104F1000F6469B97A03D5FAC109EDA0BACE7E5BF71
-:104F200011F37A41A4ED59CEFD00A331307E69FC26
-:104F30005CB24357CD6DF0205F6A10F6A0BFBE3D56
-:104F400090399EC848ED766782D9A598EF6076299A
-:104F5000A6ED81271A71DD39887C9CE15C7B44CF0A
-:104F6000851D9032ED3FFDB53E4859FCA74982D3DF
-:104F7000AB9558BEBB43E59676AEF132D9F3ED0161
-:104F80004712438DC682BF43C06FD4EB94E31E35F6
-:104F90008FFDB23B6485F7F8E18FB7F7BBFAD54CCC
-:104FA000707D567833F8CADEBF52AAC4C92E96A3C4
-:104FB0002133FF3B5D9C4F95524F9CDBEBD9CA7D63
-:104FC000BC7D8095A35D1C886A78FEC2449EE2C4C5
-:104FD0003C280726FC4C14EDDA5DE23C1AE2E4AF13
-:104FE00095B47833F291A742A1F3017B3B23F58975
-:104FF000F69D9F7CE735928F711E920F4963F29365
-:10500000619CC7E4C878174B37C9910998BA8E38A4
-:105010006399E4649C8BCBB1271AD53C3CD4242300
-:10502000FCB345BF7D06FC7A9CCEBDF285BF3A4FEE
-:10503000F867A7E19FE19A43F07F0ED36CF04F171A
-:10504000F094427800F7EDC8A0D82FC0059AF95C1B
-:10505000AE57F45B2AE003B88EE8669477093CE427
-:105060003B9FF979CEA7373D9F46319F7373CDE7BC
-:105070000B623EBD2EBE5E791AA35A88F1554916C1
-:10508000BA2C15FD6F1EA1CB75C7C4575FCD731E1B
-:105090004BD3F35822F8EAD25CF3880978FA9C30B3
-:1050A0006F3FC6CF4C16EB0D3459E8B2C5E02B3735
-:1050B0005F3700AEB7D0E576D14FBEF3599EE77C9F
-:1050C000B6A4E7F33D41975B72CDC754BF55D46F8B
-:1050D00013724576CB16D78E36B43F1E93A31DAE02
-:1050E00039E9F158BD4E73BD89ABBB8D7A6BF0BB0E
-:1050F000B468A45E8F185FD845F7D37E6C35DA1894
-:10510000CCBEF9E2EA171AD01E67ED3650FF51BE49
-:105110006EB276B799FB9FBDFA8E3651EF4EACD783
-:105120007AF611A3FF4DE6FEB7B852061C77131CA2
-:105130008D23FDDD63AEB7D4D5DFC6CF092BD403F5
-:105140007E935D13CAEFDCC7158C2506D15F090578
-:105150007D687774C8F12D83C80FCCC87B907DBF64
-:10516000C91D9124B67EAA91F8C358AF4477AB4EBF
-:10517000A45B43FC4798D71D10C5B8C83BFDB76E6C
-:10518000C1FC0AD9A3BAC3686F697434D41B9429CB
-:105190009E67B514D3715D3C24C79E7191DDC3BA7F
-:1051A00064E3DC54AA25BB25F4DF82C4ED0E0ED7E0
-:1051B0007AFF250984C3CDE0C2F8E0D536B8D878A7
-:1051C000B42FEF1AC7E36D40865A19FB73FAC2D8A1
-:1051D000DFC0B81B09DE44AB5BC5F689293712BCBA
-:1051E000AC2C4AF179AE38C1DBE9F2A8188F77A769
-:1051F0007FD9268CB75BA117517D8203E73FB99A0F
-:10520000E0F7423CB5A40AD5575FC481F02C522880
-:105210002E3911DC40FBDBEE456C9163E376D76EF3
-:10522000D0B1DDC1453E8AAFF306FA00E3AD4ACF07
-:105230005700E380BCC13EB2334BCEF3F17C05D0C6
-:1052400038259FE7F1B22E1854AB595A9AE071C72E
-:10525000DDB54DFA12B463E6F27854D0232F617CA9
-:105260005B31887FCE8A01ECDF35D109CE709ABEE2
-:10527000A57D23ED8B6219E465A45E32CF7AA9FC8B
-:10528000EA9524E4FCEAF5E5592F9967BD14AFE7E8
-:10529000860B8A32C57B8CF0FD0285EC0F23BEADF8
-:1052A0009059FE23F64915B7DBCDF68A0B94B4BDB1
-:1052B000827CE65C9C138E156FB606779BEC9BA0F8
-:1052C0005210A4FDC669701AC9E518ED0FB5E8C102
-:1052D000DDAEB1E78B129632F9C9C7AABF06ED3D24
-:1052E00077F672FF8C0B43A4CFA67F4DA48B793A3F
-:1052F000937D9F8669B3C87F4DE4173747328C573B
-:10530000AF703D5C0BD19C74F00AF80FE0993F6BD5
-:10531000522BB3FA19CEC78D3430CD61B31BADFA21
-:10532000CE23EB0D74CE51CBE307DD288C283761FB
-:1053300020FDE282945A4DE78B91C225E3D3F2E33C
-:105340000A8D27F9F93F654E90E6127DC288473BEA
-:105350009FD8F92260E38B4FCB27171F273EF127F9
-:105360009C79C98FBF2FCF7AC93CEBA5F2AB174808
-:1053700048F9D5EBCBB35E32CF7A295E6FCDBF282B
-:10538000C2DF7AFE2AF4C3F8BFE8B1E4D77CD16764
-:105390002DFF52C092EF39D7DA3E709EB57DCF799E
-:1053A000D6F681F379FB273BBE7A36FA79F29593EC
-:1053B000DFFD8D7252EBC95DBF64D11872E5D16912
-:1053C0003FE99535480571FD62EB9444692499C124
-:1053D000BE7B4EC8FFF32EEEC749C83AED6BFFD92E
-:1053E000E7F90385FB8D8CF98E05AFA17F7FEF1464
-:1053F000F696DDFE1AF1EB1C3E7AF454D42380C1FC
-:10540000D2A06A6C6AE8C7055F184345BC357D7455
-:105410003E6DEFBF0BCFEBB8DF25D46482E33937A5
-:10542000F7ABFCBCAA2344E7B553EE08E13EBD6BE5
-:105430009294D1CF7244E1E782D5313FD9199D9A38
-:1054400087F461D7247E8FA9CBD547FEE3AE2A6BC4
-:105450007B8FB01F8E287CBCAE957140FB7FF5948E
-:105460003B9A715C77EA5F4163707F77529CE247B9
-:105470003BDC7C1FE08EE880EB8247D3E9FCDD0E4D
-:105480004FC2881B82BE509369DE4D6ECE373F6798
-:10549000F3C9675EEF280AD557231C7FD9F0B5E31F
-:1054A00018F175B99BF7AB85BC84AF837540EB09E8
-:1054B00012D2C9E84824D6F0FF06C1CC6FF6F51821
-:1054C000C027F8ED28E535F9E29CFCD425FC30EB4B
-:1054D000D00FC352EDEEAFE5E4E74EB19EBBE1EB7A
-:1054E000D4AF5B8B4750DFF96AFBE052C22F4460B8
-:1054F000BCE03B82B73DE2C0F30580F0666627FA68
-:10550000C675855339FC629E5AEB7A77ACEBD96C41
-:10551000375BCFFCE9F5EC20F49013768D03AEC831
-:1055200074FFC358CFB4E0C539E7DDD5C2FD5600DE
-:10553000B7403FCEE76527F1B3A306F4F58C5EEEE6
-:105540005A99E21CDC913E5CA4C15303296F61F6B9
-:1055500079BD2AF84E0BE51E77ADC0F71AA4D389A2
-:1055600039EC2C7434B37DD9AB9DF7AFC2FD5BF140
-:10557000022E07237C2FF759F87358E17E8D2EAF4A
-:10558000D64AF12C55DC3F62EFB75BC06997AB445C
-:1055900096FB3486DCFE55D1B81EF2F491DFC19043
-:1055A0002F4DFB57D2735D93DA3C88A784B681FCFC
-:1055B000C4076B14C07B30767D300287C0FF59D0A2
-:1055C000E3C1FB4ADD2F3BE9FEABBD9E17376526E5
-:1055D000BF9EBFD6AA7FC7D227777E4A7DF21343EC
-:1055E000EE47EB135A7F2FEF6CDF85F4E9F272FF81
-:1055F0007549A30E4B4CF3ED11E32F768B75A18209
-:10560000C3D1E552EBCD742A66DFEBCD7A330B7D47
-:10561000B2D1FD220C069C9386C33EBF87DCBC5EE4
-:10562000098E3F6D6C3C8CA603C7C32A77663EF893
-:10563000ACE6D3E6CE8F8FEF16F5EE167835E6356D
-:10564000969C18FDF70B7C152FB0E97D59B7D0DF7C
-:1056500069E0ADD156CF63AD67E04776737BC5583F
-:1056600027C6EAFF2D85F387BDFF6C72F89B1139C1
-:10567000D4C92F6B8CE3861F4448EE985EEE9E09DA
-:10568000501018247F01DBEBF378A76014CCE73AC5
-:1056900076FD65E8FF6CFAC8BE6F19ABBE12547296
-:1056A000DA49865D5322EE4D7A443CF00629F339FF
-:1056B000CFB09023A6D8F38AEBC33011DCB74114E6
-:1056C000C4FDBFC8402BCB8F0F2B5A37FA3FE48560
-:1056D000035B597EDCCFDCD01D4697CB82810186EF
-:1056E000AF35114F14CB2778AA46EE69F59D8A7E17
-:1056F0002D6E7781F396D7F01EF0F88B6440BCBA1C
-:10570000611EC5691F5CC174D8CCD1F08C9701268D
-:1057100096B054F807E8FC10B7945FB1AD8B8B4C92
-:1057200079F4037BACEB5EBEF3B6C393ADDD98F0CA
-:10573000A4F7A1FB717C37E45ED78E757E23766D6E
-:105740009EF332EEA319DFAB869DA0E1FDF66189E1
-:10575000D21386FD94560E7B299D345C0A1A235A77
-:10576000C57031A5138727D2F7F2E1324ACB8627DD
-:10577000531A1AAEA2B478F8144AD5E193285D2FD3
-:10578000E4B0687836E58DFB6F85C333295F30FC64
-:10579000794A03C3F378B9384F5DBF3206E8AF5694
-:1057A000701D62F2B17AE1525A97ECF35AEFE1EBD5
-:1057B0007087B827DC61D3DBFDA2FC510F97FBF5A6
-:1057C000422E408E83D96F7E8FA8B7BE3A46F677B9
-:1057D00087B11E962DB5AC87F6FA1D59EE273F6DA1
-:1057E000940B78A0B6690CFAF0F357773046F706B9
-:1057F0000062A497408E59F46E87017F9EF708D708
-:105800002F7C9AF8D8CB0419430BBD5FB8BBF901C4
-:10581000D43BE7DC78C56E26771FB863377970DC38
-:105820002F5C454CF7FD65378750BFAD5F7807DDCE
-:105830006F42F31BE39A3BCFB925FE00711DA3CB4A
-:10584000746A77ABC7740EDAB5F4E6E687587F5A08
-:10585000BB033413BF56DEE203CDACBF0E97966197
-:10586000FB8A1B4A2CDFCBAF29B7B433EE49842E19
-:10587000ABB6D453179C6CA957387F96B59D382783
-:105880000FD49D6E69E70E1878E5E7888CFE96F5D3
-:10589000A353CA4CC7B887EBCB6C7C73A187AF6BA3
-:1058A000E9FE73D32D5BFFF9DE0B49F347D6799000
-:1058B000BD1B4F2C5A80F6945B8DD13D9563AF7F15
-:1058C0007CE7916F3DBBBE2A447D558AFA44A234E1
-:1058D00080FAAA14F5889752A3DEB1DEB75D8BFA81
-:1058E0002660D2377398DC67E0878037B7BE3945CA
-:1058F000944FF1727DB356F0959D6F42A2DE5AD45B
-:1059000037D3C6D637216F6E7D33538CF78FD6379A
-:105910005DB3EE887D8BE5BCA7DDDD7C3F4B3B674F
-:10592000DE4879A62F642F2BEF3CF596F8FD263D37
-:105930000287FF93F3A5E087A2B956FD61F45F10DB
-:10594000B6E911431EFE46B93E22F8351B7DF67FAF
-:105950004AB93E729CE4FA88A77B019E2FE62BD7BA
-:10596000A3EB1FDF79E45B4F6F80D459B82F99EA1E
-:105970004BAE42BF9BA32FCCEFE5C5286EA7EB39FA
-:1059800097F0F370FFDF2C4FE43CE49F599EE82230
-:105990002F6B7F7D953601D76996FF227E37E5A371
-:1059A000B67C93ADFE576CF90B6DF59BCDE5094DBB
-:1059B0009B80E78B89BD2E3A1F4C688EC64CFC74C9
-:1059C000AE97F3CB5E4F3486FD9D983C7902D2852D
-:1059D000E52FA5FEBCBC3F96BFCC965F4AE3A7F37C
-:1059E00057D8CAAFB2955F63CB2F33D7EF3A32F9AE
-:1059F0004E7A7FE3972EC07B0976385F117AA273C7
-:105A0000CACDB1362E973761FBCEA9B7C42F05E2B8
-:105A10000BF2A33903B6FD1FE33333BFEC15FDFCD6
-:105A20007CD28DB46FEA64FB278A63443F5E06FC38
-:105A3000FCDA2BDEE1D2AEA4FB0F89B2EBC9CFD1E9
-:105A400059D146710A073585CE67135599DB1B7E00
-:105A5000A6CE8ACCE708BFC6205C933D0235DCFFAA
-:105A6000876270D481EF0971FDBEBAAA83F4AB924C
-:105A7000BA92FB37CA62E4DFB84FD04F09C4C9AF4E
-:105A8000E0AE8867DCD7778EE0C3EAD7DC69E04315
-:105A9000EC234DF820396CEBFA6037AEAF096F6636
-:105AA00039FBB197CB992B94DFF8A3E7CFD7872D9C
-:105AB00078A925C3BE36E1E271F2FA24EE0790D947
-:105AC0003866BF827DBC9179DAF6D9F70A3C25BCED
-:105AD0003CCEDEE8CF0ECFC3A2DEC35EEE5730E68B
-:105AE00025AB7C9CB1FA7F162F6BA11F40B5FB2123
-:105AF000AC7AEE1651DF15B4D6CB869F9523F8E12C
-:105B0000F15806FF8EC5EFC6387B112EDACF66DE60
-:105B1000876B87E752FCC64128E8EBC67DB3ACBE75
-:105B200086711C37B16D12FA4557C93AC527E81A74
-:105B3000A80FD2F9273F7FB8C9797218F59D47C4DD
-:105B40005500C655044D7189C2CF79A7FFD687B1DC
-:105B50007C85EE56F17D9361EF641EB77A7805C5BA
-:105B60005374B19D3A8E7BC85B99C4F7AC9C453D9C
-:105B700064CF3B9D33E399E24C651FE7DBB30EAF87
-:105B8000233DDBA1F17B371D72CC53320D5DD53A3D
-:105B9000C96B97963B7ED11E07E952EDF187567C83
-:105BA0004DF771FA26C4FA9BF0869BCDF149219FEF
-:105BB00097CA87BD56F83A11BE00C215A778D244DD
-:105BC00085C381783B5EF019E32A558E28E22508CB
-:105BD000318A57F184641AD7E1E7F8CD362E68F29E
-:105BE000FBE6F7638E173E47D6DF18E727197CC41C
-:105BF0004FDA024FC336CC3FE7A4F5D43ECE7E5FEA
-:105C0000EC349FC92F2CAB317A77C6E8EFDC713CBE
-:105C1000CE5BAE00F2E32B106DAC62F35F55C1DFDB
-:105C200059940363C44554D8FD15D9CEE5F8F988D5
-:105C3000719E53FF073EAE4FC40B14C020058B1658
-:105C4000A14A9F8CF1029AC4DF81084B3CAE7C3E96
-:105C5000C59107BD9F75BF8BA95F29B21E8EFA8FB4
-:105C6000A15F7990FC5C9F79BF63C0EB85BBA95FA6
-:105C70000C4D3D5A9AEE17F52F39950E1F3D8AE7C8
-:105C8000664E30FE713B5C76F07B55505E48718706
-:105C9000AB83D77BCC746DF5555BD65745EDB84ECD
-:105CA0002AC47B9FD7440673F0E56A9423F42356F5
-:105CB0005C1619ACCD5ECF805366D3CFE40FED50A8
-:105CC00062C956B4172B033C5E558ED3F948A754CE
-:105CD00032ABBBCEC4BF154A0AE12AA88BE818CF65
-:105CE000D859EA08631C960C3DFBE87D27E7A270B3
-:105CF0002E79952BE4F7CCF3D9ECB3C681AC1A839B
-:105D0000DF570B7D9DADDCA5846399F4F0E33EB1D4
-:105D10008EF932977FEC6F78D49761DDD921F454F6
-:105D2000673153A59FE3EC837C2057EC790DF1B0EC
-:105D30007ADC39B9F5936AD54FFFE58FFC04C7C902
-:105D400001C7B399E0007C4C210FBB5F5D40C18867
-:105D5000E978A020E76B8C0392C6D37928FD5B5BC2
-:105D6000775F0AED6ED7924004E9E78C6C035C47DD
-:105D70008DB82067C4F7B683E8399FC707D5723F4F
-:105D80006B84FD477164F373C78D396DF95FD9E991
-:105D9000DCF20CBD1761C06FC4A9DBE7F5A4BFE15D
-:105DA0002DDF9C4CF8C86F1FB491F10B307ED9C029
-:105DB000D6778614E86B5129DFDB12A27C4F8B4625
-:105DC000697B4B2DA56BB0E93C8CFF8827AA703FFF
-:105DD000127A207439ABB2116942712D5B17E23E21
-:105DE000B27B240FBAC4E0EEC6FBF1CC0EFDAB6F64
-:105DF000C342B443BBC5BB3BA0772C44BB2C9DBF67
-:105E00006B35DA85DD228E565D73DF42DC3F6E9C9A
-:105E100064EC93239EAF9AECAF297E17F11FEDD56A
-:105E2000A8FDAAD5D89F571679D8BED09A8708C2A0
-:105E3000E3F5F0FCB9FEA7081E52016CBC0BFC4F49
-:105E4000537EE314E17798D634061EB91FA3C3A787
-:105E5000713B685A09F929947018AF17C0C66201DE
-:105E6000779EFDE0FE87D6BB9733AF9769B919637C
-:105E70005D13708C457F860EB22F500FEB38EE2BE2
-:105E8000FCFCFC788FBBD1756C7851E60EE978F597
-:105E90006BA72F76869FB52F88F4A7AA58BE70519E
-:105EA0004A27F1CD73DC32BFB84FC6E68BF26FE004
-:105EB000D9B03BAE433A8E4BF7E70A46E8BCCD2B50
-:105EC000DE13CE17DEA53ED5D20F3CD65096EBDCC6
-:105ED000655CD481414623FAA2B4D127823578BECD
-:105EE000385262C917CD2DB7D42F08575BCA5DEA67
-:105EF000C996F2BF954E5FF7A916BE8EDAE6B5D009
-:105F0000569E6FBFDE154E0DDF83AC920D7B740382
-:105F1000DD4B3E883846FDD83793EEE9428D710F50
-:105F200001285EC5AB45883F7D10A6755AA9B0DA39
-:105F3000A972D06AA7869AF594D12FC6677B572895
-:105F400034EEC83A15E0F120C63919EDD727A3AAD7
-:105F5000FBDEDE2ADE2E6CBE7F6F4F65715E4677FC
-:105F6000EFABC63E4FB58F13FA4AEE38357B7D084E
-:105F7000C8DA0193FC656F27C301D3BB1A5B91F6A6
-:105F800073D2F88F6C5B427E0F37303B9AE17955C4
-:105F9000E84288B17976601546BF04A68CCF3B42B3
-:105FA000B3548AC3D7385D1D1E2E27DFF16B967858
-:105FB0000E6780CB89516F2CFADFE48478A6F5EC6C
-:105FC000153FDF271FBA35FE27DC5FEA2F01BDE34F
-:105FD000DADF324CEF5CD6A5CE75A2DFE435FF7870
-:105FE0009A4FDDEE88F36C533F75C0DFFB66FF9C74
-:105FF000667FAAE11F86C31E8A0BDE9EE271C1DBAB
-:1060000053FFBDEB28E6F73AE85DD1EDFB72DB57B5
-:10601000FDC2BE32EAF5EFE5FBD57E19FC25B9ECF1
-:106020001C71FF6D66CA1677288313E97F68A5E6A1
-:10603000447BA7BFC523E1BA3F4BCCB32E1571E219
-:106040007A3AD6BC76DAE86BCC13EF1FE23CDB037E
-:10605000FC3E60BBCAE64B7CCDDFCBCE06EFC8BEB4
-:106060005FCD8C0FA580BF7BA1B8626AA6798F75C2
-:106070004FD180AF03E19330E5707504391D3A428A
-:10608000B9E9B04AC067D46B0F723AB433FB201F32
-:1060900078E480151E66E34968170620D9486F9A90
-:1060A000E9F012EE8348556888879DA97B105EBC95
-:1060B0007781F67C719D7439DEFB8871FBB0A02E70
-:1060C00095DA1124F3248AF7324A0707526FB1F2A6
-:1060D0003DCD7E7AEC49BD7C7F0AFB91D521929F14
-:1060E0006E1C8CECA3C91D68EFACC63F994A9FD0CB
-:1060F000133A07ED0F19B85E6012A7C9E3857D92C8
-:1061000041DE4DE7FBD25177BA5D36BCD9ED4E3753
-:1061100034E5D657E2BC5F67FFA1BE516DF723ECB3
-:1061200076AE3D0EFE0CD4E7E3F2B887F129C7291D
-:1061300082FB3CF81E82B3D6A1E23BCC4CA517E310
-:10614000FD1F7F448614A3675160909ECE1A0BEF0B
-:106150004CFF35F2B8D17E30DF236D0A703F50B06E
-:10616000A94E92F83D020DDFDD0C36ED0D67E253CE
-:10617000833F47F28127483FAE866402E34EF446F0
-:1061800007AD6BDDB5D5C5E6FDD1750149EC430D15
-:10619000FA83269F9AA63F9B5FC43BE3EF47FF929B
-:1061A0004556BC1F2B5D5606B85E1A8BFE9F761CAB
-:1061B000836EA3E5A355D06D23E9BFAE9AFCF44AE4
-:1061C0009A6EF791BCFA6B2192CCD0AE4DD0CB7EBB
-:1061D0006FDF0371C0DFA3708A7854E784539BB7E5
-:1061E000420EBA8C8AB3E2FD3803DC9FB656F285C4
-:1061F00071A8B559FCCB350592D0FF833C9E6FDE6C
-:106200009E109E1FF7CC3910C2738EDE4F329F4313
-:106210009E5B20CE4522AFD33EA0770EF70BE23F28
-:10622000D43B37F13FA15A7F7713BE63B6F64DBF1B
-:10623000C51EEA68C9ED6F50CAAF88A19D71E86DAF
-:1062400049C3F5462A5F7122C235306F29BD3BD262
-:1062500051B793CE617AC2B9E962C4997688B8E839
-:1062600091F1B39C1B1E12F25AAD5F4DF6656FD9CA
-:106270004B34CEDABADCE3E07B59B9EE45791C1039
-:10628000237FB1ED5CF70D31DE1B01713EE18A7EAB
-:10629000697215FE2E874EFEB1F1B5D10107C35BC1
-:1062A0005341ECD500A36BEFBC1BCB100E7C27C673
-:1062B0004CF720F69F01BEF1050E8BDD74A83AFE67
-:1062C0005F2BEBF0F729A6D2BBF546BD9E2C71ECF7
-:1062D000271B74D6BCB4EFE9C0B87F065F4F597E68
-:1062E000F837E87C163CEF998CEDB3C4F91AA97D18
-:1062F000BD1F0BEF763CF4BA06290EAA57CA3C9F85
-:10630000730BB8DCF5AE4CF173B57907E85C2D90F2
-:106310007A9DE227BE3B671F9DAB5516707A601CC5
-:1063200025DA518573F97B80D9E4E85E413F59B5A0
-:10633000D60379D072EEB32520CECB82B9FB33E001
-:1063400004CF203FEF192D97B4FE3CD8F3C01E7A3E
-:1063500037055274AED0F18A13EFA68EE061945CDB
-:1063600025F8EFC2F4E2C6E3741CE7D60EF493F40A
-:106370001AE76C33F9BE49AE4BD1399BA740B3D86D
-:10638000EB81B0F12E627EF30CE05AC4FDC332AE55
-:10639000ABE88F47F8DA675E48FEB46C74FD8E3F59
-:1063A00036BB609CD9AFCFF75DFF6C7C7828A059D5
-:1063B000EC433B3FBAE11BC7B4AFCBE65F3E24E4FE
-:1063C0003388154DFBA46F162899F1FBD64563E180
-:1063D000F79B99F17BB10FE13D747BE6DF2732D269
-:1063E000BB6CFAEE2E231E057F24A48CFAABBA20D8
-:1063F000C3BC8D75F55081F17E4FCC87EB46B53E21
-:10640000DF87E33FD473A90FC77D68536E7A1AE321
-:106410006F11E78B49F1EE88519E147CB9D5A6E740
-:106420005F16727D8F90AF873C511FFD5EC5AE8BAE
-:10643000CF3B89E1AF9AF105BA14B52E28C9357E54
-:10644000956EDB971CE3BD96DE025B7C6F9EF73496
-:106450003F2D5EB622FF9C8E78F877927B67AA88E4
-:10646000E4A9FA1ACE37D5970DA5705F3B79A3231F
-:10647000A9511C4B8CF052768DAC514C9BB8F77ADD
-:10648000A258DFC1798BA312CBF1DEB88A6E17F563
-:106490006B140F73B7F5F73F1EF244DA14B47F1391
-:1064A00014E908D53DD6DFCB9808A6DFAB60E396AC
-:1064B000BDF92EFD7E4A99ED77413E2DDE77FC83B6
-:1064C000F09E94C167D6C79A04D14C7AFF3F055F0E
-:1064D0006AADBBF93B06F100BC633AE760F42B41BF
-:1064E000BB608BBEA11EF1A927203C25831EFB6D3E
-:1064F00081DFF81D9FDDF8CE82AB82DF3F5BBDE41C
-:10650000C2C11D4C656DB9A5C1721FC0A4177E5BC9
-:1065100040EB13D70B49BD89A7879DC427537A2029
-:1065200089BF83B260637CC085A27E0D7F87BA2C51
-:10653000A14B0ACB5733F395750F93AF005E7F31B4
-:106540002423C447F06A687CFAF74E2A07AF1BC0C1
-:106550007DF11EB62FC6DF51317EAFC4E097897141
-:106560002B7F4C4958F3136CFC626F5FADC17938D7
-:106570007E4D8F03705F37AED9541FFB83A1771F09
-:1065800066E34FD98D0F33B2B42F77FF32C45C85E9
-:106590000C9F4FDD1AF8652D9BE0FD3D0DA58897FA
-:1065A000873C40711107A31E7A7701A299CF9346C9
-:1065B000F1AD61F767A99FD697BC9EB1EE75BE2974
-:1065C000F1772E2AD5B7ABD0CFF92AFFDDBAF4BBCD
-:1065D00015A7D3BB15218873FB11A294B60BFE54EB
-:1065E000CFAEA8427F68E22DBF8AF7B3D452AB3F4B
-:1065F0004D2E69A4F7C046ECEE126677B3F244B1B3
-:10660000558FD61772BB355CC8EF85AA7EDE0F7832
-:10661000F432B3DEDF582859CB037AD9974DE50D14
-:10662000A27D42BC5B7E56E1799D68CFA81359FDDF
-:106630000CFCB9408C6B944330BC0FDFFFD8F48D59
-:10664000A639E6F57C63213FDF514F10E35664869F
-:106650002B51C5C7BD4D8CBBB1D0FA6E1CA83C35C3
-:10666000BEDF5170A3B49FE1FB900B1A305E65D57D
-:10667000384712DF4DBB69BC1117965B4F18741871
-:10668000C1B7CAE391CAAF50673933C8B1916E6ED2
-:10669000E47E2AFBF74BC43CDAAF68E8AB61704597
-:1066A0007673B9730721E3391093EF4B0AE7645807
-:1066B000F7DB1B691F77A838F7BA6FDFE7CAC2BFDD
-:1066C00068AFD72AE8A4BD1CA2A7B8DB43DC9F684B
-:1066D000F47FA88CFB15EDEDBA6CFD7BA1298271CE
-:1066E000C678BE8AE7AA4A0D24F1BEA92FD8A756BC
-:1066F00069181FB04FC7FD91060C8FE8670B03D9CF
-:1067000075ED21BE1F95437DF50E8C278146D56C16
-:1067100087958BDF5534F2AE40ACB590ECA1884440
-:106720007891F979FE2157F25CC4E7AA2A07647AC6
-:10673000A7BFA790DBB99BB5A617AA32D06F7DA1E2
-:1067400066B19FCB87B9FD9DAD7EBA1E876F841F52
-:10675000433ADD3F008DF3635341E4F6C24CE7B7A3
-:10676000865E117EC84BE70A850BDA45BF66F3B833
-:1067700072AF8B62D3CF3ABC650FEA5F27D3BFDD20
-:10678000F43B727D7BD00F7919DE7F62F92BDF9CA1
-:10679000AE54B2F257CB9DE2D1F968218EFB01389D
-:1067A000C85FF201BC5438DB44BF270B15BEDE24A2
-:1067B0005CA4470D7FDCE57D2E8B5EFDF6266B7EAF
-:1067C00029348D473FC5D28D2E4832FC5E69D3BB3C
-:1067D000F717F273A26F43BC03D7CFD5E2FCEFDA11
-:1067E0009F4C57506EAE9CAD56394DF7AE9E2DE482
-:1067F000F6DD7B8C8F34939C5D15482AB88F7B67C0
-:10680000FBEC0B3F0FD84FB2A31CFD69C599E30009
-:10681000BF95B0C239D63CEC701BE779D9E090B790
-:106820004919FD42CF154A167FFC2A0F7F0F29B266
-:106830004A06EF9918870774CF4F7FB380DEEFD6F3
-:106840001BE21457A7B7B9D555418AB3A378BA1537
-:106850008C60F8FED001C17F465C1D33284EC37D9D
-:10686000DAB59E4105FDCACBE57823FE749A712EF8
-:10687000E376C5221319FCAE67EA5313C1522F9178
-:1068800067BDBD52755EF51A1D39FAFB50E8C95F48
-:106890003C76BF82EBCF078FBEFD4594C3AB9F759F
-:1068A000025ECDFBF0B10248D1FE21A9A09C5FB5EC
-:1068B000DD99F11D098631EAFFEA1F15905EBCEAF9
-:1068C000097772116B7FD5D3EFCC00264F1FB60D21
-:1068D000ED9988F87B54E2E785FAE00C5C9FAE9274
-:1068E000E19B99DE1DF31671797FFFA7FE66A49FD9
-:1068F000B46DE012EAB7FF2297F95D7C28E2EB0F56
-:10690000ABC7E3261F91925332E80F633FF4FE2397
-:106910003CAEE4AA675C490C09BE6ADB5625C6E0BA
-:1069200058BEED23E297B37FF47821E261F9334E4C
-:106930008B1D71F58F3EE9389DD1F96A270C2D42E8
-:1069400039761EA6FCC18867C84972CDE35396917B
-:106950000A60F59EFCFD39BF66E5EF859C8021AE9F
-:10696000EFEDFB9DF22CE6630166B961FF56BE5E5A
-:10697000BEED1D857EC7C80143159FC7F30FAB9DB4
-:1069800064AF0F30A4A09E5ADEDFF59193F1DBF2E5
-:10699000ED1FBC817CB7DC261FEFE11F65A3EDF383
-:1069A000994536FB7C5B695EF6D1D58F1FBC17FD20
-:1069B00011EF3FF1C77BF11EED35473EBEF77B1867
-:1069C00017F66F5E15E57BF9A3AF148249FF9F5F51
-:1069D000C4D7CD0F1F79F8A1CD6CFE1FBEEE266C7B
-:1069E0007DB8E3F795E8FFF9F0C77F1D8FFEA01B88
-:1069F000762CA4DFADB9E1A9B327E45A17915F93D0
-:106A0000E6DF5714E746DA33121A93003F13A98DD5
-:106A10001ED037A4E0BAF6170986BA8BD9F7FE4F15
-:106A200014B4CFF6446008F1B36BFB3B7B6E66F9A0
-:106A30000F187DDC19E8C3E63FD141FA99890D4B67
-:106A4000976DFFF297CEA8C3D44576F8721822BD91
-:106A5000398AAE2F33BAD6A5E96A2F3F0887153C8D
-:106A60003758FE18A3E30CA427A3E38CD174FC00D1
-:106A7000FF98379A8E571559E3920EC2355B3663ED
-:106A8000E1F6D28CE7BCC63EEBDAA7BE9AD37E32E3
-:106A9000F4C25878BE42E2709D5A14B9B908E5EBC9
-:106AA000891F3CB439C8E9BC8821E6C3C70F560228
-:106AB000E3933FB8862E413C0CED70ABB8BE5FB59A
-:106AC000E357246F1F3EF5A2A2517C0B144AA7B2D4
-:106AD0003C8CFC7B09587E99C433D73EF0FFCE79BD
-:106AE00083B5BF167F3A5525FA517E0F933FA247D3
-:106AF000F282460DF56E721CCD7B5992CBC5B2E485
-:106B0000C05730AECF8EF7278B1C86FE1FA12BC639
-:106B10008D2DDBFEF639C87FD9E869CC5FC5F99FBA
-:106B2000C6CA1FB0CA6D563915F4FD70EB2105EDCC
-:106B300083D4B38AEA60F6F087AE2185D6C71F3BBF
-:106B4000D507C3A3E99EC6BF883F3AC67DF80FEDBF
-:106B5000722EF033969C8F3DAF63C3DBDD451ADFA9
-:106B60005FD9F0F7FEE1CCFAFF39A1379641BCB10D
-:106B70007CF2E8F54B86A83EB12A0DEFFB183FC624
-:106B8000E07DFF5127ED0F3BFA77911EB7EB8B6548
-:106B900059ECE8378AB83DB0EC998119A8D7DEDF07
-:106BA000F953E2CB658FBDADA0FF66CFB62795C187
-:106BB000696939C0F5C1FC3B38EFFF706006EAAF88
-:106BC000E559E2007F2FE6B3FC67D6FE973FF691CA
-:106BD000A5FFABF57E85FC64638CF39E1CB908E7CA
-:106BE000FBDE3E179E60C07BFDCEC64C76CEF362C8
-:106BF0007D34F0D45170EA6B4578EE55C2DF616C9C
-:106C00006F8DFC8A7EBFF74597D8DF465E437B6673
-:106C100055B142F711DA0B2E247FBDD15F9F0D9F36
-:106C20006A50ADC7FD80BA205A67DE5719F0174782
-:106C30001C16F86F28689CA005F8FE4C63FB8FFFBC
-:106C400001AB8A1A34008000000000001F8B08008E
-:106C500000000000000BD57C0B7C54D5B5F73A73CF
-:106C6000CE3CC24C2627AFC9D37892F09480431211
-:106C7000DEB40E0491226A505AA9F5AB03F28821C2
-:106C8000C9A4F8E25ABFCB8444F4029F8D95166ADA
-:106C9000693B70A152217690A0B10DDC012C060554
-:106CA0006F105F78B18D5A152B246314B4575BEFC6
-:106CB0005A6B9FC3CC9C4C84DEFBFBBEDFEF0BBF4B
-:106CC00076BBCFD9679FB5D7FAAFD7DEEB0C28DEFE
-:106CD000DCEA5400D93D6B366461AB5AD41409E048
-:106CE0002BFABB2AD6028400C603585DD5E0776133
-:106CF000AB5A407300FF7D45FFA7785B7BF0F97BC3
-:106D0000E5D4D6B5348FB5F157D4872605B657F2FA
-:106D1000B0914A25DDBFC2BBB61860A3F39F1FA781
-:106D2000FB2B8376D58E6D73EA3DBFA5FE0609AABF
-:106D300065EAD3F3383E6875A8DB55BC9E0E0BC2DE
-:106D400065317AF25424321BA00CE9A016FFFC3006
-:106D500001DF2B488266A8031C012959A120B5C672
-:106D6000730FAAFE62757CAC2FBBBAC18FF35E2D88
-:106D7000BB2CB4FE07732D217B31B537A641D9401A
-:106D80003E18ED03ABAA213262F0FBADD98E855BD4
-:106D900080E90E5A681D9223B49D08F181A67A807D
-:106DA00069030DFF873C74C4D18D037CB40E45BFCD
-:106DB0006FC565D14D3B04B94D213960EB84084066
-:106DC00029D2AD96B05C52A1479F240AD563006ECC
-:106DD0004CF57F93D6993BB451A2EB1EA8E6B612B0
-:106DE000FC12DDB738EBF2FC5FB33E58A09CE9190A
-:106DF000A9CB175FB1C12AF8AF28A00C29273A36D2
-:106E0000ABEF8FC679E87E268D0AB21CC6557D672A
-:106E1000740BC181888FE3F323336764126E8C7126
-:106E2000CD8EA29312F2DB27A7A82945D85790331D
-:106E3000C4A753A9CCA71F4DC399F1FE8F4FA56ED0
-:106E400095511E8F48024F41C213E10A1A1F277C39
-:106E5000B8113F6BE9B9198DBF65BC58A0BAB952DA
-:106E6000E7A487F827FE106F8CA7958A43B57B8926
-:106E7000B73E4DA1796C105A2B11BD7EE6A7035A7F
-:106E8000B91D02616E5DD0CDED5DC4E76C92839754
-:106E9000FB69D0D33A149F9BA356D7AA78FDC7B3FA
-:106EA00033245A9F0B549DBF8579D41F94BF3391CF
-:106EB000BF8E187FEDC44FE7407E3A40653EA47B0D
-:106EC000C1BB761CCF0B115CC723D321243388545C
-:106ED00050112F39FA3A33C127117D841F5A5FF6BA
-:106EE00002B13EF3FB72A195C7E54398DB42E8E6A9
-:106EF00036C3A14A0AD3734A97EF3BF09533468FC6
-:106F0000D1DA09C138FFB9429CBF98B9ED963CB4BB
-:106F10007EE3AF9A71F887CA83BE2A1CA7F85D3E4C
-:106F20003B2EE5FF54CE201082F5720548AEAE9E92
-:106F30008573C18DC3BD36888CA4D9834C5FCA4884
-:106F4000D137EC8B1D051531E8C7E7ACA73E3C45B2
-:106F5000CF59216E1CD121DF9A467C7F982E4C1E82
-:106F6000C8F795A79AB29E8B9B77AB9A9A45EB840C
-:106F70008930F12B39F63C4CCA402333F0F9CF5617
-:106F800005B39EB3C6F8D0E2F867C6A50F019CF220
-:106F90004DEC138EB36238465CB29D0BAEB6ABCDF2
-:106FA000598C43C6E94A64901DDBCF528A42BC7EAD
-:106FB000689C7823DA618BC3274978BD4E75878832
-:106FC0003FF5AEF02CB61326BB317DBE1AC9C77192
-:106FD0007D8DE025BE6EDC73C369E26B9F07347B59
-:106FE000BAC0856F02D909C38E8026A37CD748E337
-:106FF0001C12B6F5ED1FBFF47B1C9FD229838CF7C2
-:10700000FB70CDDDB46EC5974E4274C2FA04FD6EBE
-:107010007608FD31D669D6D77F749D28799E9FE585
-:107020002093FD5DFF2FF47C3FA4B6D2F84D0ABE3D
-:107030009AE6EFB286B6231F561C91196F2BDAA47D
-:1070400010909C152D8DFAF7BE2883C01FF0FD7B94
-:107050007F55CA789461F48FA6E1F381CD562F5AFB
-:107060004C48F725FAABCCD943408BC301047D2FA4
-:10707000E722BF16EBFCDAE87C780BD1B3A949F81C
-:10708000A7ECEA8C84F19FA55C6F5B8AF36B79486F
-:10709000D714C24DE7F035D85F5E20AB329A889C9A
-:1070A00005F989FEB1D5FA0EE99F86FF08DF86FD56
-:1070B0005A4AF68BEC907C3FFBBF7320FC9F02C2C8
-:1070C000FF35A0BD8AE07CCB3689E78DF96A3A1F8F
-:1070D000595380ED1DA1C4EBCB4189F5D9CFBA47F7
-:1070E000921D580943BC766920FE2DE9887F0289EC
-:1070F0000B5C420E2E2FD997FE5764AF5DB082F520
-:1071000095F84E7644EE19B1711ACE17E8B242489E
-:10711000237989FBFD9BE550B038A61FFD5D7B9868
-:107120001FCBF2901F884F7B6E22FF53B444FE3B6F
-:1071300047667CAD3C52BD267ECA7399FFC86FA0DE
-:10714000F9D32695243EAFF37B24FE13FCF6319D44
-:107150004B3B24784C223EAF3F5CA00DE46B43C711
-:107160002336D2FF8BF1D5CCC7D1E9BA1DD1F9783E
-:107170000E3A0FE8A8AC7678D894F03A14B5753A80
-:10718000E1B410F5967062D66B837FD62CD567C3B9
-:107190007197D1385C5FBE232C94D10BCA09C2CB46
-:1071A0002261779B551FFB23C3DE3A2FD8ED77E191
-:1071B0002B6CB3E6553E4438BA534A6D952B07EA1B
-:1071C000EDBA31F7B0FD2A5C8DF698FD6A629C1627
-:1071D0005EE5F02E467A9E5C05DEC5C3009E5AA58C
-:1071E000726B8EDF0C7DDF8CF19B5DF8679E5741E3
-:1071F000FCAE55C9FE7855A2F3611BB09EF69541D1
-:10720000682BBE3F1CF9D4A391BD2E8F5E5F8DF11C
-:1072100045600954539CF1AF1922AE7B466F6765F8
-:10722000D8B85D5B6D011FBEA7B7530E49485FAF6D
-:10723000EA3B7215D99D4EABC6F1951A7DE97B7C70
-:10724000BF425D8BFCCCB3B48EA3F7E2F8D9219C8E
-:10725000B7AFF35DF7ED717EB9B7E3D1511407FD18
-:10726000CC0235E124F1D0F2740BC731BD23DFF13C
-:10727000E0B2A1DE11B501E2E9C19EC66A8AA7EEBD
-:10728000746A4C97AD7D7AA480F1338FE3E3E7967F
-:107290000E61BCED3D0321D2BB59F2ADD78EC1FECC
-:1072A000E45715AF9D95CA77FDC2093C84E5BEE160
-:1072B000CB8A4DC4BF00F273355F6C3D41F27AF664
-:1072C000CF0A90DE55363EFDAE1FD7793817D13044
-:1072D0000960822F5C11C151333BD3A7937E074EC7
-:1072E00001EBEBF86E2501B720D71D2A20BBF286F3
-:1072F000080F27BE61BA0F4199E2FFC93D89D7A7A0
-:107300005E04EFFF62D80D377808EF8FADEA807723
-:10731000C92FEAFE331F17988C9F06BEF738673CCB
-:10732000922EE2769970EB55928F7F2743C4F91B1A
-:10733000BE9425C2655F14BCAB915F7D8BF379DD94
-:107340007D9F524086ED97F2EC709278EBD7E9364C
-:1073500096DFCF6C02F73F5BEA0A35E17A0E2EAD7D
-:10736000BDBC07DF77FE9FFC97AB5F1707A369B132
-:107370004C6279A511DFEF9CD722B11E426B1EF142
-:10738000CD3CDED013436F0C7DC95B3AC41F4AF27B
-:107390009EE1B43EA46FC6D291928D70BB5F029203
-:1073A00063EF6AA4EB6BE2C720AC2E207A021D9F2C
-:1073B000D8C85F3B3A255F28C9F8C3E96EE65FEF9E
-:1073C000EA60D354E4D73D8BF059D20B5B6B71B2BA
-:1073D000F983B0A1008343684BD704EE1D701BE90D
-:1073E0002528AD79E4B77B3BAABE4576FD31D44371
-:1073F0008A1B7E66F532DDC17A80EDC4160A3CB187
-:107400005F783D6C591B974776A74F3F958EF39D4C
-:107410004A5779DE4CBF5722BABD7FFBCC4DF3F7FC
-:107420007D6E67F9E5930EC7C56D9FA60BFEACC9CF
-:10743000F0BDC678A9C96263EAF5BBBD8B2B00AE6F
-:10744000EC407EC7E13226B720AF3BC31F647A32DF
-:10745000BA3171E2FCCBA751BC1CD08D334424500F
-:1074600026C4EC73A5A3305220F287700EF237A326
-:10747000E6C76CAF53D00E53280EDD8979115B64DB
-:107480007C9E749FEC42B32AE2AC967461E75A1E6C
-:107490005142CDF8DECD4A4FCA306C8B7DDA0C45B7
-:1074A000237B5FC6F3E6DE05ACDF164748223BE4EC
-:1074B0002CFD45FA85B86B2AC0EEBFC9CC7FB39CC2
-:1074C00046EB7AB126C3FF05F1756C57F420856F42
-:1074D000DE14C824B9CE925DBCEEC96785FD31DBF0
-:1074E0001B39F2AB9F91BDE9D3F3A724F6E676F200
-:1074F000AF86BD01B9EC10E167EA8B7A9AA9DB1976
-:10750000CC3E980F138FFA9B5D49ECCB24A84E43D9
-:10751000165FD4BE98E588C1FE857E2132A3A20BFA
-:10752000F528EE79B33D2AC8D0FDAF6E8FCEC1B439
-:107530009CABB5185ECA577A0FD9E3F061D8A11891
-:107540005E428C33F37B24705CE8ABA5643F8ECA4B
-:10755000696477A6A3DC71FE2E5D4FD23F0D7D8B53
-:10756000E4BFA1F39A14C2F5535D550E529B15B9B1
-:10757000B2F6678C9F9503F383A0C385EC9DF15E03
-:107580002B3834D748E28785F920ABD88F7B7F7FB3
-:10759000AB349BEC220A2D6DFE98C1EDC18A5C1BB9
-:1075A000BFE7A9AE9234C2910B30BF45F955764A78
-:1075B0001C2798716DC67133BEC0C2796335C7137D
-:1075C000B214D6F71D12F3D2E2E064F65377611ECF
-:1075D0004E716B7F17FA2D6C9F423F4F714AB36B10
-:1075E00016AFDB58AF41DF5DA93372A06CE0FA8DB6
-:1075F00036F0B90CA1CCB8BE12B5118E039FDB12C8
-:10760000AE1BFC1C8C0F063FA7103FA5FF3E3FA7FB
-:107610006608B99AF9FA3F5D7FE18A49906C5FE0AC
-:10762000FF97F54F05FFEF7B44BEF55AAE27664F37
-:107630000A57CC9697211F26503CEE8DD90707FE9E
-:10764000237C8DED68657B3309ED0DC5990575616A
-:10765000B62F137345BE64B61B5776C24D641F2701
-:1076600047302EBD04FBF129FD471EEFE3FC32033A
-:10767000E91EF7FC82E5BBF0D2580D32E7E27BC68B
-:10768000762B5EF27BD09D99745FC0EC378CB8D4BA
-:107690008847CDE38C78D4F0270D3A1FFE3DC3FF19
-:1076A00064065D57D520E91BEA55F8312FC35EA368
-:1076B00078A13BBD7A37DF1F190E721E50022AEDEA
-:1076C000EBA0BE721C56E97045E4B103F5D369D254
-:1076D000C330F285F609822E4B689834900E0CB7B1
-:1076E0008314F7E103FCFEA5BABF28C4312CB4060D
-:1076F000E0F8BF702CF8C9EF1696638BEB3CA6C779
-:10770000232F995AA4FB79E2AB5581A0BDFC1FA79A
-:1077100097482C2827FEF8FE40EB77CCF631FD0584
-:107720002A78298E2F50C29217DF9F51A74917360A
-:10773000910C3F8DF315CCD5D85F160CC53E8DA7A7
-:107740007827895C7A32ACBCCE7A47CF611BF221B4
-:1077500030B771B6DB128BD3ED56BFAF80F68F3AE0
-:1077600044BC0EB4DF379EED9244EB516608FE0434
-:1077700054915FB94065BB59A9CBB1D23197F77726
-:10778000C827DA270F5CB7A4F97870FE7CD0829303
-:107790006376D5C87F701AA0F798ED6ADFBED72F41
-:1077A0000BA23EBEF5BF3F4905BCFF27259A4AFC08
-:1077B000387DFF89541FF2E3ADFB45FEF27D537C1B
-:1077C000A4640AB92ECEACFE82F87ADBAABF4D883B
-:1077D000B72FB0329BF5E28E904CC9F005FD59BE33
-:1077E000C3C97BCF46BF3E9C99D037F4A0DE0E8D37
-:1077F000C9E2EA6999222FBA63D7161BE5D18B3308
-:10780000FDA999D83FADC77FA7DB53793FC0A067DB
-:10781000D1AE7136E2F79F3AED106103D96D157262
-:10782000F65D2F4DA0CD7BF167A6F3F0FE021BEDB8
-:107830009F2F91202AF6B5E0F0CFB1FF5EAE0C6B22
-:10784000BD03D7B1E42DD56641F92C990ED120EABC
-:10785000D5A2BBA435F7E2F8457E17457003D6B92B
-:10786000309898E72FD3E395DB1FB29AF2A4C6C3F2
-:10787000B45FB618E7A17C76496BE2FDFEAE3B0F24
-:10788000FF9CFC40878DFDC0B28BE44FE332F5785E
-:1078900065024CFCAA94E295B21F956983DB25230F
-:1078A0005E39BD0A083CF097550E6ECFAC52B9FD5B
-:1078B00042B7D7CB3B0E1C665C2BDD13C8CF3ED541
-:1078C000F5AEF3162DE637BEB9E593433FC77E0507
-:1078D000ADB398EC65C44A78BC4AF71BCBF438A426
-:1078E000E273B3DF38F087DF539E8DEBDFCE19D71D
-:1078F000A5C523B782F2693C1F0C3F62E6477F575C
-:10790000A99370323F33713FF67FCA97C19EAB9700
-:1079100011D749EC87A14F5F64087C2FDE366F4D8D
-:107920003EBEBF79DF07453DC22EBD069E185ED123
-:10793000D033DE960144D7223EFD9DFF7498F87443
-:1079400098F03689FA97F1FDDC2AC42FEAEDB2CE21
-:107950000FDF84B1AC5FB9965C6A23B9945F9A710A
-:1079600068C69F196FBDD69E22B20F669CF54A89E4
-:10797000E76446BB34539C5F2CD67CB328DF45B705
-:10798000B646E5F508FB775A693DFC43D2DB6D123C
-:10799000E787F5CFB43D4DF6A8F6B73F71933DFAB2
-:1079A0005069F5D0FBEAB63FE0F6915D52826E7AFF
-:1079B000FEC390B04BE6F775EA7C34CE052EF8A5F1
-:1079C00087A26BEE437E9C477D26FD6D68FFEB9A98
-:1079D000FB28CFF039A294779E567A66111D772C3A
-:1079E0007435367929BF4D5C77EDE33FF168BC7F94
-:1079F0001C2CD0F9C7F96AC336AB3782F336BC22E8
-:107A00007BE9350188F2FACCCF07C2EFDAC87EAB4A
-:107A10001688164E1D781FC56823BD09B4AFFB58E4
-:107A200076532BE415203EC79D33D4E876D88CE3FB
-:107A30005D99FABE888E5FE40FEFA706912EDA3FBC
-:107A40008290B0C7CDBFD938F66DA4EFCCB617DDA4
-:107A50005259FCB9C26A96477FF8F65F392C83E326
-:107A6000B757C77B2C6E09F1735A87240E833A45AA
-:107A70005B678DB8296FABDB62F506F1725D9B0C1D
-:107A80000EF25F27ED1C37D4B57DC2F8AC937C5164
-:107A9000691C2FC32DC5C511CBDBDE9B45F676795E
-:107AA0009E0C7351A56AF79C13E37D104DC1F1CB79
-:107AB00077BF3DEB87D447BC3B92C8AB2A7CC0263E
-:107AC000F4C624AFF0DBB3281E6EFECD672C8F0FFB
-:107AD000F74B90533CF0F99A2DEFD9C89F9C41C1C8
-:107AE00064A60B7E91DF0884E585B6B464F28B5CF6
-:107AF000FFBB4ABECFFB7F1793E37A3A6B1BCF786D
-:107B00007FF2774847CD9B76EF5C7AEF9377BA01A7
-:107B100071F081D22870FF8B073CE4876BAC418FFA
-:107B2000CAADB85EF3CBBB198FCB8EDFED11F98DEB
-:107B30002F4FEC1705F3689D4B367F9BD7B914FC8C
-:107B40008CC79A5FC8D5B44F734E81D9BB93E84DAB
-:107B5000659688B7ECF083B1F789F300A0FCFC03CD
-:107B60007DDF34F8B2CC719B1D6E4C9B17B7FF6460
-:107B7000CF12F62A08A13FD2B96A00DD2B9F831CE1
-:107B80003F378BE6B9AB5869A473225C7F50E79707
-:107B9000F415EF0B80A6C4C55955C7AFCEA17D31F2
-:107BA0003BF4DBFE5725C7D51AC53D71CF31DF3E0B
-:107BB000D86A1F225D89AD27F9BEE9ED5986FEC35B
-:107BC000CB1087A7C08E0F184F80FE3B2D57F41F98
-:107BD000237D5CE46A4C43BE7DFACABB363AD70AC1
-:107BE000E27A8611BDDDEF711FBCD91A8D37E60F21
-:107BF00074D863E781A4D7DBDE33E975E27DF4DF77
-:107C0000CCCF00A46994B77D608BCE227F1EC4F7D1
-:107C1000527DC1D20DF684F3C6185E4CE78BBA7E56
-:107C20001AFB9CCB4CF198D19AEDC29559897601FB
-:107C30003667273D5F34E72175D6D0AF893F75277A
-:107C4000ED9CBFD4B509FDC3803A3A0CF5E1A35DC4
-:107C5000875EBB05D7F151D89A3597DF96686F6B71
-:107C60009E42FDC5F132F23B85EDED671C4F19FEDA
-:107C7000E823175E1C93446FF17A52BD7501DBB3A4
-:107C8000FF577676D92076F6BB5903E284347C0D13
-:107C9000FCE589E597537C61E6AF615FCD76F393B0
-:107CA0004C2DA9DD04DDCF1B7CACDD7996717B3ECC
-:107CB0004F9C37356CFB2BFB31646BD48EB86D0851
-:107CC0007DCCFD07C88F71FFC07C696CB27527F24F
-:107CD000D37CFF32922DE723D1EF139F658BDB2BF3
-:107CE000F6E7543ECF6F26BF49765A5381E40833F6
-:107CF000204C7187D4F9FC5FE97DE6BC223803464D
-:107D000036F2B92EAC8BAFCF092B7A3D4530797D59
-:107D10004EB32D769E4BF7073BCF7D5FB7575E97EF
-:107D2000CAE508D62C4D4E5657E2ADB224CD237E7F
-:107D30009225CE774AB3C5BA8F650979B4C8D5FA0A
-:107D400046A3C897680F95ED5FBA9BCF83AD7A7D48
-:107D500006CE9CCBE7074ECB27C812D8BDA17A8EA2
-:107D600042FBC315963B4BB1DFB5E1F6390AE2C7DA
-:107D70003BD5B2A704FB2F6C582CFA575A2AAC08F3
-:107D8000FDC7834BE6CCA47D03CBDB3FA5F529AB38
-:107D900015A0FA91D296F7B87F97559C5F353CBBFA
-:107DA000B786DEDF20A12090FF2DEE7023D731E4CF
-:107DB00082BA9A368FB53D7EBABF260FF3799447C3
-:107DC00024CDFFDB2CF22B8E885B2BA1BCD2B7F12C
-:107DD0007B785F79D94A3921AE53EC838FDE333516
-:107DE00097ECEEFF85F7FF5B56F6E0EF3FF3D4B577
-:107DF0000B68FC68195419E72B57B42AEADB31BF2A
-:107E0000A6BCCD9043B922F85EE6B2713ED792EEA1
-:107E1000CB253C1D239C665F7ADBACD70FC94E8116
-:107E20000339CDD2B81BDB5774F9BFAAF383FE68C0
-:107E30005FA06F5FCE56AE5B816811C95796B7B62B
-:107E4000113FA24D0A6CA5FDD77D8FB7113E5FB7DC
-:107E50003978FFE8E6B4F5D62B90E47247D19D045B
-:107E6000FE37A55D7753BB2FDBDF9325E68DD0BCB6
-:107E7000B77C5F16F3BA1A53C97F820FF54AECD369
-:107E800070FC0E7ED42BA2F920EAD5383205897514
-:107E90004E663AE4B45D4CC7CD7641C78250497313
-:107EA0000FD231CE1EBA8CF22B7C7F94E4700B86FD
-:107EB0005B84E760217491DC5EBFEDCA2D627D8535
-:107EC000ACAFACFF7CFE7EE6499A2F80F3D3396AD3
-:107ED00040EAE1FE1EC5A1065561DF17C6EDBB3DB8
-:107EE0000BAD27CAC4FE7E33E51D53F5BCD8D87F41
-:107EF00033EA0D2676F9AB5C64B0E54E99ECCA39ED
-:107F00008CD7C88E99F7DD269BECEFD48E8FD82EB8
-:107F10005FEC3CD099ADDBE37CC8A77584E93C906D
-:107F2000025EDD4F7AE93C3089FEC79D0766660B2D
-:107F3000397DED79E09DBABDD1A84E0ED7D18F1312
-:107F400093DCFA8F2E82F24AAE476884F4C1FD6A50
-:107F5000BBC9FE1B381FF38A7A3BD9B331AFC06D62
-:107F6000B4DEABF5F393FED3C0F580E37A1C5C1F5F
-:107F700068EDB28642525C3DCA490BD7A3F4833701
-:107F8000C4F52B41BB1A647B3996EB4F5A4EEAE796
-:107F9000BD7A3D438560D93F5C0F61AE7F98E29E1C
-:107FA000242FACE4F31990260DAC7F9822DF2A939E
-:107FB0005D81A3429E17EA20E43299D6752E0240D5
-:107FC00029DA8457E2E48DFF9B981594B9FCE954B3
-:107FD000E2F529265C98E57F6DB61EDFE8F21FB456
-:107FE0008EE443B1AF360EC6721D89D55C47F2866A
-:107FF000850B366375241521D2B7094D62DFF8620F
-:10800000753CE63A1D731D4E9E3F914F0535572432
-:10801000DCBFACB13CA17FF9CA2909E38BD1A1C671
-:10802000F74B1F9A93307E58EB8D09FD119B6E49DB
-:10803000183F2AB428E1FEE81DB549EB5E0C9C8C84
-:1080400009AF48B8BFD1F9E4BB84AF963C59A578D5
-:10805000FECA8EFB4C7531D31817538C7D785DFEAC
-:10806000465D1D9581119FC7A3FC1F2BA6B8E9FE95
-:108070002A491B88036F24C87EFC1FC5C17A931D43
-:1080800030F4FF62FB373FD6FD849C5224519CE3C1
-:10809000C3B82A652AD5118B737B784BD4AB7C96F9
-:1080A000F2778E8B34C9ED856FD25B5589E2A07B68
-:1080B000AB348E83EE1D527480F60F7A7EE0F64A62
-:1080C000F903EB42CD75A0190EDF64E0AD11510745
-:1080D000D982869EEC7F708683E38C872D96DBAAFF
-:1080E000E3E87F225BD89F27B245BEF5735B783704
-:1080F000D901C5016A539E789E8A1F802A7B502E23
-:10810000EE4C10F561F0C6DA9985E43F7B466AE9EA
-:10811000543F8BFD6FE06525C4FEE4966685F3BC95
-:10812000D5CE27D99F942BC29F8C9385DF403FD219
-:1081300041F6F14DE97EAB88B38256924F810382BE
-:10814000EE72F6AF7C4E9C0E59D28A32AA4FBDE039
-:10815000B7B4AF104C876AA75A884FFD8B653E0FA6
-:108160007E8948427AFB6B46719D73FF85FA3F2DED
-:108170008DF2EBFEC58F9EBDBB32A697276DC9F36E
-:10818000BC8BEDBBD56C793495CE514E8E8484FA80
-:108190008C37B3457EF866B62CEA0C42EF79884DF1
-:1081A0007D4BBE184E4407A4EE352E1CF2E0A61FF0
-:1081B00054935C6CEDF382B4AF69ECE35FC8033BAE
-:1081C000A773FDB6912FDDFCBAD8D7BBF98BC47D60
-:1081D000EB8FB2C5B9C047F43E6CCBBBFCE3496E34
-:1081E000379042F0BEB27F3CC507D52A68E4F71746
-:1081F000F817DE7D14FBF3D64B1CEFD37D1A7F23DB
-:10820000CA90EE9F00EFAB7B91BECFB3053DF3A1CB
-:10821000DA4A74BEF6FDFA54C2D3EBE9627C54022A
-:108220006D6BDC7C37E8F3BDFEFDE57B294FA7F7DE
-:10823000D1FB891E7AFF3C154AA8FF1AF8CFBE5A17
-:108240003CF0BD3781CFAAD77B59C94F9642A8EDE4
-:1082500069B2AB472CDEB5C06D2493FD929DFD52F3
-:108260005F53F4C97B90CE3FD5FE75AF847CFDE3B0
-:10827000C2E8AF9FC6EBDFDD248386B8F838C32F92
-:108280007BE2EAB44F2EFE2495F889F1CAF69F925C
-:10829000DEEDB47BA9AEE3CDDA9DC3E3E3FA54CFC0
-:1082A00074073D07932EED3CADEA89C98CBF15DB01
-:1082B00005FE56FC66440EE16C45EA05DC89FEF6D7
-:1082C000523E279D2041D2FC783FE24D1BC17535BF
-:1082D000A021CEF67F2EEACAF71CCDA820FA14F012
-:1082E0005F16BF9E3D2FDD329AEB79DFC8BA243A84
-:1082F000496783687F6F665389F181AE270B3A33F4
-:108300002BF478729487E2B9DFFFE6EC7F105FF61A
-:10831000EDDCFE43D6914BE3C3C03A5A7527DB2709
-:10832000230FA3BA57CAD30E59D84F5E2DDFCF798A
-:1083300018D56970DE35A488C7A3C151ADC2BE8906
-:10834000EF24300E6EF672BD27EBEB4A55C42D4676
-:108350009E245BBCB98AF8C8E0C5A93C7F09D0FE61
-:10836000989B122BC35E611CE1962DBABD029F0340
-:10837000F3D3D1BA3D9BE5F15EDB22CE6B12E24F27
-:10838000EC57ED4A127756E33F8E3B37FB9B53D8B1
-:108390002F6D96CB28EEF03922E4C7CD71E7545803
-:1083A000CFFB0003E2CFE7FE7249F1E7F73CFF3D68
-:1083B000BFB3D4A3B1FD098F14762E1C19C2790E58
-:1083C000FE55907E0DA5BD003A07CD13AD4DEA1DBB
-:1083D000E940FDACF594AF7B681AC265A8E00FF5E3
-:1083E00051A450AA7D72E82B8A03BB15965FFF73D8
-:1083F000577CED772495A887E4EC2387A770BD739D
-:108400005F97D08FB60CEDDFA7529E8171E65624A0
-:108410003145E9B1A52759CFD3647F511FC21E91C1
-:1084200047393AC4B9A843F301D99714551D478970
-:10843000B9317EB147D8DDFAC36F16D9503E672DEA
-:1084400047DD74BE52B7F729372E179A33FD0F90C8
-:10845000FE2C3FF9F20495EBDCB61451FE1D8EBCE8
-:108460003C83E3B3D9C8DA7183AF27B0A9823E4217
-:1084700080864D99DC8EA27D15BC14888875F676B1
-:10848000346724DB1F08FCDB5B0769BD3B8FA570ED
-:10849000DCB233BB9BF520380F603BF2FB89CF4742
-:1084A000F37C0830A6E38A6A4D227FFF0B7D3D3BBB
-:1084B000F5FCB2F77399C719F38EE9982EAB88AB28
-:1084C000B248EB41AEE3EAB46B24DF946D20F8D3FD
-:1084D00099C2756181FDD788BC335D9C47B70D8912
-:1084E000FE91DE13DD67D7A84E35456D850C9CBF28
-:1084F000CD26FCEC2804FE53AED875E37D299D1BE8
-:10850000F92308C405D7E3A528ADF00D573CFF5368
-:1085100099DEFD1E11EFB40D89585CE4273057DA5F
-:10852000CA74C5E8047EAF41E7288E8BDB6CD1F7B7
-:1085300069BF1DE9520917A340D0099D23348A570A
-:10854000525471AE9EA26ADEA03490AEC05808614B
-:1085500070000FAF860B7ACE758443627D07EA42C6
-:108560005B891EC70417AF9B392DAE4F866C52EC4A
-:10857000F9139E65EB5A0A695DC20F2A4A98CFC764
-:10858000DD0B40A5F3EF14C5C77952CA7CD09A50D1
-:108590005E4E878FEF7B708EA6C9DC8F10FD2ADDC3
-:1085A000A77D9B34D53907E94EFB328D9F6BE8B62A
-:1085B00072DD79DDDF6F4A2BC3F59DB11CBC6717F7
-:1085C000B61F2D0C0FA773DA0969FEB7C81E3F73DB
-:1085D0006AD1BA3138FE2F6D56EF5CB24B3DC11FE8
-:1085E000D3B97DED13568DFCE2836FF447BE22F9BB
-:1085F0003E2BB15DECB38AFBD8D79AF07E43E707F8
-:10860000363AD7BAA6E36D1BED7FAFCCF1BF4F7AF8
-:1086100030A9A3A98AF836195A9B699F13ED21D76F
-:108620004B847385BDE87F65F8D6A6383EBB72F4EF
-:108630007DEFA8FF72D29B4E5D3FF7537C84ED5EC9
-:108640003D4EDB7BE0BBA55ADCF969100EF27EE003
-:108650006A788EEB3A8DEB7D216536E168F46B8E9E
-:10866000DB7C7138B3E5087DB7E9EFFB798EFF4B12
-:10867000D6DB03EFD8DCB8FEC09FC345E4AFC21819
-:10868000CF7D5D1D69C0A42F17EA8E4E03DB919D3F
-:10869000AF7570FCBDF33E359DF41EE98734ECEFF9
-:1086A000C5F882F4686FB1D0BBA657CF8FA5FDE2A5
-:1086B000F3FB965F4EFCEAF5580D7CCF18427AB476
-:1086C0001BD88E197A58467A28D1F77B62BFA78CBF
-:1086D000F04D7A67EB9EC37AB7D702A477886FC64E
-:1086E0003BE25BA538A44C45BCF3F323588FDBBABF
-:1086F0005FBE82EBD991BDC3C651DFC2F86A8BCC95
-:108700000949F87CA53572909EAFC4F7376931BD31
-:10871000AC9412EB7A167B449DAC611F7FA0EB6793
-:1087200078A496E6C5F14E594EC07F9C9F147DDD1E
-:108730008FDEBBF127EB36A0BE94FA2A2C1328DE7D
-:108740003926B31FD8AFC7C92BFE30E5865DE23AA4
-:10875000FBCF888E8B837ADCFCDCAA5CEE935FD047
-:10876000502EE3B1F55550BD7763156DC54D9ADDBB
-:108770007A88DA29D5E12A3A2E9CB6A0FB90F8C671
-:10878000CD379AF0D67EF05BA3B94EFAA41DE83B34
-:10879000CEF6FF8CFEF1095CFF3DFB91DF90342E9D
-:1087A00061BCA1C766FC0D86933EA9E7FAA968974C
-:1087B000AFDBF8EB6B1574E80D04045CFF9C8DDBFC
-:1087C000D605D1079EC8F15D9783F8FB22D77F5D60
-:1087D0000EF2ADEFF87F7AC89FEC7DE51D37F9E129
-:1087E000769B6F34E1AABD04F38824789C9263657C
-:1087F000FF5A3948BD49638EC8B78607611DE1A598
-:10880000A15D5643E4A77DDDD793DF781F5949FB6F
-:10881000DA4BA707DD942FD5EC3DC475FA463EBD73
-:1088200004F43FF9D659C4FF73B9223F5EBAC19A26
-:1088300090DF8E80888DCE91037E5763044552630E
-:108840008A3BEEE8D8C2DF8DD46E4B7CAE8EE2144C
-:108850008450DD45F2E3C61C7D9FA4144A294E4195
-:10886000DCF03E49F455D9BB15B8BEAA8BEAAB760D
-:108870005A049F9C0E6849CB88C52B23F27C4BC8B9
-:10888000DE2D31FC875EAF146D93F87B8A513B443B
-:10889000BE3CE5B4B685BF930AFAB84EAF86084031
-:1088A000BAA728415EFF94DC5208E2FA27A1792694
-:1088B0007D59DA2985989FFA772F0AFE13FB459B8D
-:1088C00065FECE6FB30499C5346F94F953ABEF1FB7
-:1088D0002EDF91787E51B7E9F8610A95EAC3A6F3D5
-:1088E000209D3FE6F39DA7E83F929CEFFC24478F35
-:1088F000E78AA028E1BBBCAE4BFB2EEF238A075CC6
-:1089000074F8080971F91E1D470DFABAEB42B25806
-:10891000378A82EAA36FD76112002FF3A91E714232
-:108920003880F542DE463D632D54DBA88EACBEBDDB
-:10893000E9309DBF2DD5E35A339E90A1CCAF657A27
-:10894000DD50CDE6C4FBB53A5F6A4D7C69F04B263D
-:10895000FA44DC7DA9F4A1E5FA0EE1A0769795EB47
-:10896000B9CFC1AD5C7F55DFBE85E959AACB6F2079
-:10897000BD415ECF325C0FE9D3A5D26B96DF3103E8
-:10898000E757C01509F29B9D7949F22B057539AD62
-:10899000AFBF4BE4B5FD5D25BC2F61E0C5FCFC2CF1
-:1089A0003D8EBE66938837CF765439291EE83BAAA0
-:1089B0007825C47DC5B14FDDF4FD4DF93E19E89C25
-:1089C000B4AFB3625D10EDE59EAEA13769E807CAAA
-:1089D0008F29EC372A8E9587528AA95FEE2CE53ACB
-:1089E000132D93F2009C87FD70DFD1A127CA384E6A
-:1089F0009F5949296AD3D17227C50B7B40EC6F4838
-:108A0000C72A337BE2FCCA7B3962BF614DEEBB0FE4
-:108A1000939DBA66B795F783AFB1465FA23C6C4FA2
-:108A200097E26DC27EDDB145AB5348DEBF91BC1409
-:108A3000761FEE5E9145E735F59D56D5CEF4DE7D89
-:108A400090EE077749DE61383EB0EFEAD16DB44F62
-:108A5000B4A5C24BEC35DE579EAE3D4AF5AE90E76D
-:108A6000E4BCFD9ACBACEC5FCFE43BFF752EAEAB24
-:108A7000D6B76516D9E133BFDBC375157D6D12E43A
-:108A80004AB48F7CE849AAF739F3F4711B9D075764
-:108A9000B51FE7BA8DC1FCC1D910E28EF3F6561BA3
-:108AA000E537F55B8C7E0F7F8F52ADC7510DDBDE56
-:108AB000E67E2DE50184C7CD7248C3FF3CB4EF19B3
-:108AC0003E1F6ED825EA3E2EDCDF26F17D03EF8BBC
-:108AD00074BBB51C34C6FB7203EF7A7D9481F773C7
-:108AE0003097EBB496EF7A84F1BD44C7B7B96E0AFC
-:108AF0002DB0AD2C4BE82BEDB799BFFFBB43C7F7AB
-:108B00001D17C1F7A85C1DDFA36014E1FBFC7451C5
-:108B10004F77FEF81027CD7FFE08EFBE7E1DCED921
-:108B2000EF1ED5E382FE88C567BB3236AEB7E313CE
-:108B3000FE0E3170B4DF467527B33A3F6679CCED4F
-:108B40003C3093F87D1DF8EB887FD7753A558A83C2
-:108B5000E7F6087B36A7D3CEE713D741B885E4DC28
-:108B6000B7FFF1960CC2CDAF056E0C3BB74CE7EBEF
-:108B7000B5653F9845F97BADEE0FFBBBEE9CC57626
-:108B8000671C1453BC3747FFCE7B4E58B7439B132B
-:108B9000F94EE7D424B7864E3BD79B5C0B3D36F2AB
-:108BA00067D7EAFED3EC27FBF29C2CE720FAAB61F7
-:108BB00038BE6E97A98E52E9617AFA3B6C7CDED59D
-:108BC00060F2BFD372AD09F51783E1D32CAFDB722E
-:108BD000757FA2CB6B6E54D431CC7945F6D2F94374
-:108BE00057647519C50B06DFCCF2EAD24AD3BEEE44
-:108BF000F7125ED2E37CA37F83FEFD5B586D75C5E3
-:108C0000E7EDCFE75AF473CED04F2B709D7749D064
-:108C10004D38C4FCE6867229697EB33217C73F5FC0
-:108C200078FBFA71F1F98D6FCB708AF71E44BB5255
-:108C300051C9F53BDD7C5EA8B4CEA573B0C02EABA8
-:108C400097F29A4087CCF14060973D64C179AF219B
-:108C50001C215DD59DD2D58423CC1B5A72D13ECD2B
-:108C6000A32D651C37AF03E3117C6EDECC8F197F1B
-:108C700047868A75F72B5A4EB23CC2C81F1A3E1758
-:108C8000F1AA71BD01ED008D6FD0BF4B6B3FF8D7DE
-:108C9000A2E2543AB7FDAC6821C5A9B9227F31E2FE
-:108CA000D528C6AB257ABC4275174B85E860E973B9
-:108CB000F7D9C87E1DA61FB6A0FA49D5BF86F261B6
-:108CC000D50F8D3FA240436A613D6A209D221CEE74
-:108CD00095C4FECDB356AA0D81A69787705D60EF4F
-:108CE0006BE21CCAACEFBD8BBAD95E9C5FE86A240C
-:108CF000BC2D2FDBB206230C18BDFF75B637A37F42
-:108D000067532D6A6C5D4DF4DD1DE7692D09F17225
-:108D10006F47B38DF7A1E3BF1B2E19181FD55F64F2
-:108D20001FEB79935D41FA39DEED3B22ABB42F8422
-:108D30007CFC657E3CBFF478A8FD600AFBAFBEE317
-:108D4000AE10C5FD7FD1F17846DF976F9A24333F8F
-:108D50002C93453B7AFF3325245F92871FEDFDCE90
-:108D6000FDCF5CE1E37DF490A823DE9158875D1F81
-:108D70004EACB336F81AD0F98A740DA7EF950DBA38
-:108D8000F62A3D6E6F123D92A4832C2F8B9498E7A8
-:108D9000069E95ABE3EB48713DB791DD3B69E88BEF
-:108DA00012F5901F7E2B5763DC34750AF95AF68949
-:108DB00016DFFF1DB15F63E5F70FB83F235847F794
-:108DC000CF173BB9BE013E0FCEA5FE3D25E2F7030E
-:108DD000EE79B97644FC3E1D48221F0F58A35CEF84
-:108DE00017386E61FA02C7FB3D435D6417B7CCA428
-:108DF0003ADA6B757B71B8C45943380FD27B736212
-:108E0000F32CC915E71B40EBCD8D7D5F69AC773541
-:108E1000DCC87C58ADE3EA3FF4BC1EF3A8F3B949C3
-:108E2000F2A8C1E2DF0B74EBF1D3F9E9DA89EF21A3
-:108E30000ECA8F2841CAD7F7BC911222FFDFB46F48
-:108E4000D99F281F0EBC69078A43EED9BF6C04D78F
-:108E5000E1FBFD57923D39BFFF8E2BB98E5112DFDA
-:108E6000970689BE5C8AA75EF5509C54BFEF55AE4D
-:108E700073ACDF3BFE518A9F305EBA96AE631CC373
-:108E8000F82B3F56C9F8DB73B432B3940807AF939D
-:108E9000E6AD3FA270DD63FD91CA17E7525C736CCB
-:108EA00006C74F46BC5441F938C54F478626C44FC4
-:108EB000A979827F7D075278FF438212811F189A19
-:108EC000809FBAF63F709C5187F62E1E47C673C529
-:108ED000790ACF332C4FC74F58F2313E768BB6AE5E
-:108EE000630FAF6FB935CCF26EDA6515F7DB446B03
-:108EF000D44907212348FC78912EA11CE6D842854D
-:108F0000946FBE502CF20DB33C9EC813E7852F9C86
-:108F100014DF19BF30DD3F22D9F7C6419821F27026
-:108F200049E777BB7576B2EF7977E489FD09772653
-:108F3000249C4B1AEDA379425FE6D8C43E95F9BE56
-:108F40003FCFF03FB08ECE634ECCB5AAC6EFB7E4AC
-:108F5000A1DDBD1E8C3FEFABF3B3E89C4BE4D50025
-:108F60003D33C91E7E9BF6F929FE9A24FCBAB1CF87
-:108F70003F6F333C20F6F96FB5925D30EA4BE6F96E
-:108F8000CCF157F5D534CF8DE8DF699E9B6627DE9F
-:108F9000FFF645E2AE0579BA1F1F0EC3455EE172CA
-:108FA000923F38D76555655E476868B2EF0B0DFB99
-:108FB000737895383FEA42BB486DD3A8D779DFEA8A
-:108FC0008503279F4C67BB9A0225C8E2ABBEFC9382
-:108FD00027D93C4D17F4757E02FE0C799DA53CA067
-:108FE0006CA0BCEECCB3E8DF259DB1F1F926343E90
-:108FF000649107FF2EA969D4672DA44F67F5EF5E32
-:1090000090BE227B9CDD3F9BF731DFBF6706448328
-:1090100078FFC0283BFBBFFA99129F1FD447843FBB
-:10902000AC9F2FFCE1F0F6792C97EFA05C7C5E36CC
-:1090300013AF515DAE21EFABBEEC9B69E493748E30
-:10904000D34438673B9DC56D7DFBDB2D7C5E897EFF
-:1090500097E2C21B2625CA6D04F81FC8C6FB37CF8E
-:1090600096BCE84106C8FDE65BE7B1DC6FD2BF8F76
-:10907000B998DC7F9BE7FF691EE97D77FF77C62003
-:109080008B5E18F54111F9D7864170BD55E72F0C5D
-:109090008D3E4DE765DE0BE7E97F7F3AFE3CBDC4C0
-:1090A000E3DF924776D5F2A5FB0AA0F97A7EB942B2
-:1090B000223901EBC5607AB5439F7F479E2ADE9334
-:1090C00025CE8746E9FD17ACA142FE9EA2ECD2CE8A
-:1090D000019B9E7D7E2CD9B9DE0347C6DAE2E47A95
-:1090E0006605DA07F237FB0EF1F78731DC5974DCDD
-:1090F00029DC4AD28DBA1F4DC4E119C221D9E7DD5E
-:1091000087AEA7FCF16CFB4D599216E767F79E708E
-:109110000F8B9BF7ACFEBB1898B70DFF766A3C9D92
-:109120000F309D67C3623ED4FFE1378D89BFDF6C8E
-:109130007C67C7787E7064239FD31B785640E0D944
-:10914000F83D8C0BDF55DA80BF7B0CEEB7737D45A5
-:109150009F355A941EA72F1F1A7244981566312BFB
-:10916000B9DE75226CA8E273024CDED74DA6CFEFB4
-:10917000C2B2A80F6DE4BAC5698DE025DC4AB0998A
-:10918000FB13668BF3F229D02D135DDF8428B73EE5
-:1091900050156A67508519B6931C6199C2ADB6F631
-:1091A000834EC257C4A3A4BFEF10A5A7C9E4175BA1
-:1091B000BF02EF1B78C5C1180425FD4E3F2B5FD8B9
-:1091C0007FAF53E863F4ACF8DD936F400FD33F55A6
-:1091D000E9667A53352D83CE4B763FB742A6FA9790
-:1091E000FDA04549CFBC998DBCFF169D0EE1ADE9B0
-:1091F000B1F54EA2F5AAB1FE940560A1F54AB04BB7
-:10920000ACBF1132E87C6C3244F83D5711C1B8DE76
-:10921000E9A029D4B7E517EB7C16F95B959EBF59F9
-:109220001C41AEFB49CD17B8762A2139AF92B7B6AB
-:10923000C38FD0F94CA958E744BCCEE7388D82EEF5
-:109240000BFE3A5FD8BB29106639430DA82FF28F69
-:109250002BCC54895F52C463A1DF13BB54BEF67993
-:1092600080E977DF1EEDFD6165ECDCCBDB99C3F5B2
-:10927000D0EB254B5426BA1C85A21E3A0261FE2E65
-:109280003392F87B67C5F9375E9E4F7ECF2FBEC302
-:1092900035D775EE086DE5BA9B0541640FCD5308CF
-:1092A00070DA13AB03B09684F8BE95CED955AE33C1
-:1092B000ADA07C715FB6FFF2FC6CAE371DC6932982
-:1092C000A1F1D5A931BC2365FCFB3B4E486D257B44
-:1092D000D4ACD7D30655B75ECF54C4EBD0D0CEF3C1
-:1092E0008F4828A2AEFBDE2A517F7AEF90FD5CE723
-:1092F000DB23812A15D0F9FF7EAE03A61F86B316A5
-:109300007CCDF97F96FEBB0F25FE372696EA461EDA
-:109310009F6B3E95CAF5AFCA0C9F4675BCE67AF1C5
-:10932000D296F10FF5705E6AD06BAA1357BC7CFF22
-:109330005EDDBE363BC4EF0049ABEDAA348DBE7F87
-:109340005FC1BF63D54CA141257DF7BE829FA73A7F
-:10935000662A02ED4DF3DF44FC32FF2E15C2ABFF4F
-:10936000059A376D38EFF72593C734431E968175FC
-:109370005228875B49BE46DDAD516F4B80A0753BDF
-:109380007DE277F054C409FFEE1F42C94EB8F4994C
-:109390007FCF43D4FFB6E8FC47BA7670DDA7437CA5
-:1093A000A76D7CCF6BE69B81DFFF02B9D77EA25011
-:1093B00053000000000000001F8B080000000000A8
-:1093C000000B9B22C3C0F0A31E81F9A551F9E8F858
-:1093D000049A3C0B0303C34F205ECC835F1F2E1CFB
-:1093E000CB8260BB883330E88A3230E801F1142048
-:1093F0009E0AC49F81585B8C814107887381EC3C35
-:10940000207607626BA0DA2F1C0C0CDDC20C0CD38B
-:109410008078A130AAB92F1821B41217038329101C
-:10942000333263B77FAA1A03C3011D043F5D9781DE
-:1094300061AB3E797E19C5430F6F7344E51FB5429A
-:10944000E57FB06160B07742F08F5991667E35500C
-:109450006F8D136EF9A36EA8FCBD1EA87C0B34F9AA
-:109460001D61101A00FB3B7C21B8030000000000C6
-:1094700000000000000000001F8B0800000000003A
-:10948000000BED7D7D7C1CC59560F5C7F4F47CAACE
-:10949000471ED9235B323DD2D8964186B62DDB32AA
-:1094A000B6714B06472424194CE20802B9C136AC08
-:1094B000B3E1B809770B0EC1D1E8FBC3B219192F7C
-:1094C000311C81417CC4102E281F9775127219031C
-:1094D000C9CF9BCB651D4238270739A1F8D87C6ED0
-:1094E00074EC19CF5D08DE7AAFAAA5E9D67CD986DF
-:1094F0004DFE38F9472AD5FDAAEABD57AF5EBDF744
-:10950000EA758D22BA48EC2242CEC2DF6642DE7294
-:109510001142D6CC96A976234B5A68F934317AE9B0
-:10952000A34BB46CBB40CB15FE4951D009B92C9C60
-:109530002644242436F1301129DC509D4246A28471
-:1095400078F46D55C43FDBAFB3ECED2224BBACF82F
-:109550007BE9F9E1881EA0FD3DB5B6D3A4FD0C7DE5
-:10956000A5B5D36C9E7D5F0B8352FC1A08C5A686F9
-:1095700090FEFAFB89182664908EBD8CFEA7DE93C0
-:109580002071DA4EC90E137D05C085105EFDFA0903
-:10959000F166FA7CD0453A2768A91E4D657D14EF27
-:1095A0004B9FD35649941E8F6C8ABFA5754F44CCF0
-:1095B000A4808EC841ECF734A50B867AAFE8590D2C
-:1095C000F4503A365648CFC662F43C974A013D976C
-:1095D0001DD557E6D3A3D6317AD4BA1E9CA7D31192
-:1095E0004A4FF442E8F90CD233C8E91974D0F34178
-:1095F0004ECF768B9EDA01A467A09ED2431FB9EFAF
-:109600004991388557819E00C0D9E919007A9A0B93
-:10961000D0A3FE79E8F92B2E6F49A0674D797A9295
-:10962000404F4D05F4F8D344A3CF3D4430279AE78B
-:10963000E2E5E17C5CF1F5742445FB1DFE9384F3C7
-:109640004C576464DB8A59B8498ED7F7A203914915
-:1096500090AF25F74708ED6FB85E407867BF0F10F1
-:1096600005E1B53AB31BFABFF888BDFFE17A86AFD2
-:1096700005FF7B3E8FBF2712B65BE08F0F437D78DF
-:10968000C9374802C671A5231AB48BB276FD4BD6F2
-:10969000764EFA0BB567F40CEF4DA13CABD9CF2059
-:1096A000BFFEA63E4D745AF71C4910E0BF1261F888
-:1096B00058ED295E845C0E64DF699A0C3F4216D235
-:1096C000794ADD994DD1F162E9DBD538E5C7706D96
-:1096D0008F0A740FE9073B416F9D8E29448A025E11
-:1096E00085F960C9C56632AA36D0F9EC7D59324693
-:1096F000C85CB8140857CD6C5DF68B24DB44F0EFE2
-:109700002C017A1238FFFD4BEE47BA15A06B05D03D
-:1097100095243A7DFE2D2E3FEEAFA708C895AAA747
-:1097200022A91573C71902FE3743AFE9C8B63CFA40
-:109730007F6ECD2F9D57C7FC225F1E206636057CAD
-:10974000F1D8E7CD2AFF9EF3FDB2BA14F2B7DCF8E8
-:1097500073E967E3FF1DD1B11FA2A623F1C02C3E20
-:10976000C3AEC91E906BBA268D2728C8A5749CB6B7
-:109770003C7E3BC79BA1534EDBE4F81B9C4FC39E32
-:10978000E9E7F3FB73E2F35D0EF75DA26169D17562
-:10979000E951364EB9FE7F022CAE0178C7BA92531A
-:1097A00036BEDFCDE12F7BCE0E578C3F9F9DE14F24
-:1097B0002A02F268AD47F833E713C24506FFFC6B97
-:1097C00009590EFF8736F9C3CD9377C2D27A259C0B
-:1097D000380DED6F23898BBC8D74BDB8125F847218
-:1097E000AB6CBE85FD12BFF6C6255CEE24D4036CBF
-:1097F0003CDA3DA1FD07787FB2D041089567772B11
-:10980000C98C50D4AE925ECD0A949F070931166878
-:1098100079FBFA14DBD7D76B992DB09F6F90292174
-:1098200074BC2AA279A004F82C850BAEF11B742419
-:10983000E2261FAF8A17901B4F0B4979AAE8F8ADB3
-:109840008A6D5D78CC0401BD108890AC2748F58DF9
-:10985000100823FEEBC83A86BF2E407FD5B2DE2D1E
-:10986000D371A498688CD3A7551BC9FA1D7972A827
-:109870000B4C7EBB63A208740D50FDEFA64B325813
-:109880004FD73BAC8708B5370AC8ED8C7ECF49244B
-:109890003B8FF69B13487635ADFBC9FA046D97767E
-:1098A00093F5A7705C628C1790B3ED029B5721363D
-:1098B0007DF62CDA0524F33EB40BD2B88E9558DA37
-:1098C000847D403583861BA6FDED7B995E938909D7
-:1098D00072128AA5B355F05E5F1A057C17C492E434
-:1098E000F566564EE5E1ABFA5311B49FA24B859E47
-:1098F000BC7DEC18959FA93C791BDACBEC80FEE887
-:1099000000D7339F44FD69BDFF04E79332499101BD
-:10991000BA7425D320CC95EB21A1B09ED8C9E98596
-:10992000BF2BD7DAE5559ECFE5950EE19609CAD74C
-:10993000E0532403F8524E3E7F33AD5FF2A24A4615
-:10994000A87C35931322C8CFA5641A4B8368129460
-:10995000AB8881650B8963F987362AF7B4BCCDA43F
-:10996000F2DE80F2FF51818EFFFBFAC4B2207DEE61
-:1099700089A52E87FD85CAFF76784EE5440079AA31
-:109980003649C1FD3224B0F53A266B1E801B3309DF
-:10999000EAC743426F0AF689216E270D79886D1D4B
-:1099A0001FE0740FF132144B9049985F3A2FA0D703
-:1099B0008F456FC575EC96597D80CE0BCADD26B6F6
-:1099C0008F39F150615E569CFF3C6CFFF3CFC38032
-:1099D0005053701E06611EB60B4C7F2ABF62E39780
-:1099E000A00FF7E99DDD8F22FF9553E7066FD1BFEA
-:1099F000D6A137D7713DB7814C2F96A91EB9DD9DF1
-:109A0000556401F1FE02E0FDD6CF4E7C02E82193C1
-:109A10008965B04F51BC1F16504F26C9093ABEFC8C
-:109A2000B294013F45F45DA3264AF82944A3FA4CB9
-:109A3000E5FAAC01FEB74E7BC33757FF2E9DF8AB5E
-:109A400093686F10353102FA69535205B9E8ADDBFE
-:109A5000A6821C0DD6D13AC84D445185CB68E92762
-:109A60001D207F96FD3110D931140D83DD63AC8547
-:109A70006EADF1B7441244C0E78979EEA8FDF92F25
-:109A800061FD6B898844E95332EF5381CE7E6D9B33
-:109A90009AEF7729FE4444A1723808E3C1F8AEE496
-:109AA000F1680BE84FB2BA07F4B99624AB41BE2374
-:109AB000ED88E796BAB80AEFDD9155C4AD038BE3A4
-:109AC00068570D84EDFEDC60DD1DE456844F92374F
-:109AD000FC73ED6BB73F4994BC7D02C691F2E6D9A9
-:109AE0002D27B340971429AC77FF07977F518FE359
-:109AF0007E43D29F37552AF72E2E03AE08F9997070
-:109B000069DE3C85F3F61D3A4F031EA3B3D0BAA419
-:109B10003B88BD5F4320EADACAFB9DDD6FF9BCA735
-:109B2000D70D4DE2BC07D230EFBD54EFE3BEFA6A69
-:109B300020F30425A17B53F21178EF4AC9A4278CA6
-:109B4000DD34C13E779774B101F27700F846378E65
-:109B5000D12E15CB912E0DCBA1AE08969FF77DEEA1
-:109B60008B93B4DD9E945B73831CA4EF7A16FAA3E7
-:109B70005E777C04FA0DD3FEA15F59D59ED0A0CEAE
-:109B8000F61D578C95378A8C8F55A217F16D119958
-:109B90001DAE1313E525AD95F6D3AB5AED766EC029
-:109BA000F0CEAE07FA9FAFA9DA56F7E80B6DF0CE0C
-:109BB000F5F26391E90D971C2746339485F5F85922
-:109BC000414238495A390DF687BC4041BBA05FB0CD
-:109BD000EBED8745B6DF3D26AA4867844CBF7096FB
-:109BE000F2C3A58968F704430D1359E04F8D622C29
-:109BF000A145D035A95517188F84E5DF4DE6ADF3A3
-:109C0000A7043326FE05F0690EFDDDED36B9DE272B
-:109C1000B2FDEE2C5F2F92DBEC043D13A1624850A5
-:109C20003EF447810FA26FA3D144F9D01F5274F0C4
-:109C300087FABAC582FB8E930F52D58D11D08F4E05
-:109C4000BE7F97CBD1339CEF9BDFFE30EA89FD9A34
-:109C5000D891F103DF4E74809EEF6B114590F3BFF6
-:109C600018FE39E8D833C3BF193A906F7D61663763
-:109C70008F6A547E603D8799FCE824DB81EF0D4AB2
-:109C80009730972E27FFDE6BFA2CBE5785C478A637
-:109C900019F09B8E237E1BE582F8FD6BF1DDC2CBB4
-:109CA0003F835796E165FC65E0F594901887F57D54
-:109CB00080CBEB01795205BD10B3E4C6C7D6D15CA9
-:109CC000BD24D8E49DF6F325E8E75EE887C2DF2BE4
-:109CD0004FDBFAB1E002C007B62EE26C5DC87FD65A
-:109CE0007561E135C2F1D64986C9755361B97EAF58
-:109CF000F1B2F6D31EDF1504F44DC81F47FB7B817C
-:109D00003F9E057EF5D6283AD83FD451C2FD1A9B16
-:109D1000EA797E52CDF608C0F707B6A35DDEEF8A7A
-:109D2000A39D7EBCE61BE6CD94AEDEB7AB88DBA080
-:109D3000FE80EF8AE33AE8C5E312FA6BBD6F372E77
-:109D4000481698671FC4C728FE5EC00FED6A65C637
-:109D500008077C7BFD54F1D17EDE6C2619D0A72E3E
-:109D6000BF1901BBBB77856AF420549C007F7B7CC4
-:109D70009F684D34CF6DEFF30F7C5ABA74761CFA9E
-:109D8000279C05DB97EEE1E0C7237D82ED7D413C1A
-:109D9000CAD55DB3750DFBA7755D85AE05F36CE3A4
-:109DA0002CDF292D4D32EC9BC46BC0FCC7E21D3D5E
-:109DB0007F043EFDBD847AD0C99FBF93125E69CDFA
-:109DC0006CDD154EE0BC59FD5D5D23A31E95EB488F
-:109DD000C62DC0A8F10EB06F7BEB448CAFC9FE6DF1
-:109DE0005525EDEEBACAEC6EC2E31E963CB4FD8A70
-:109DF0008DEB3598FE0E90490271952AC2E21A2128
-:109E0000A20B04DB1B421C83251B319E12F6BCDB1C
-:109E1000FDDE88FD0AE61839EB3B877E65DA6FE3E5
-:109E20007BD06F197C3DE421EC97AA87F0D979B3F8
-:109E3000FDBA22497C48DE3E7B565A4B5813FC4BF8
-:109E4000A07CCBA281EB932C0C1A4FD0A23F7C8735
-:109E5000CD9FFA88D4608B9B2ADAC0A785202DEB92
-:109E60006E3327F3F483737E3B6120F02FEB7699FA
-:109E70009315E80D30BB0BC5A5069444A61BF6EF61
-:109E8000C57E8C2312398971E141A17A15D8CF168C
-:109E90009C5CA76401AF408B99027D31384F34241C
-:109EA00003FA1D3D01FE0091AE311225E24B729D79
-:109EB000FC9B7C7AFEAD1408239E3CCED55B46DE2F
-:109EC00007BA4A9F4F288A9128E4CFA42466BF2866
-:109ED000DEC2EFAF54DAF74A6BE6F22D0DBCA3CF2A
-:109EE0000743D4E5BE8C890FC8815CF7FD93C0871A
-:109EF00081DAAD9152F4128DDA39797E91A19823ED
-:109F000052693C0E14C283F8A9F0AC2F310E9F5F4A
-:109F1000ED4A83C53B4029C2791CB7CF28DE416199
-:109F20003ED3D3F0B7BF653C0B7134D7CD7E13E67B
-:109F30004F328F1089C2FFA85622422BD4BDAF8B5F
-:109F4000389F1B0DD4574DCCBF33E93FA023B851E8
-:109F5000B1ED5BA03F67F6AD28C8BFBDFEB4648F0E
-:109F600067F6761D25BF5C328B3F7D64168A17CB62
-:109F70004AFB44617E5457C48F43545E08959783CF
-:109F8000D46FA44C2169EA3742FD00F51B09FA930E
-:109F90003A967D5D4D58EE83A6EBE1FC2C39148D8D
-:109FA00042BCF4F1C82D14E410E80E3C57F1B6435E
-:109FB000FC7CC4AAD32702D4F939CB0F7BFFD80687
-:109FC000F198110FAB1332DD66DAEA520FC4FB478A
-:109FD00002ACFD2F257F3B9C471CE2E7484436D569
-:109FE0008FE6F9FF39C98574800DC4DAFFBE1BFA0C
-:109FF000F3C8BC9EAA477C66EA948F808F4765F5BC
-:10A00000BABEC5D83FAA003A5EACEF2236DE126671
-:10A01000DF93E66D65F8D883F27F3D1CC201CDCD9C
-:10A02000D570A84C14C320B0DD1C0A71BC2BEC8782
-:10A03000C809B6DFF1B852F17553665FE378949BB7
-:10A040007F027E29C42FA81E4EC1B83F2DBC4FBF32
-:10A05000DBE31E729D1B5F94D6E9944C59FCB7520A
-:10A060004293693D604E64A3B41EBC269BC2E55B6F
-:10A07000E1B8BF93341E0F4DE0FAB7F82C6BCCEE6D
-:10A08000B8D2318FAEB089E7921E3F5B7F95E2BBBD
-:10A090001EC6C9EB873CD35E1B0F146F571317679F
-:10A0A000ED2DFADFBC0EEFACBD46FF0B99D5B67AAD
-:10A0B00055EB421B7CC068B0BD776917DBDE9FEFB4
-:10A0C0003C5DEAA0A3D1E21FAF479C74562C77B247
-:10A0D000CEF7B914B31F67EA7C3F2E577F7B99BD3B
-:10A0E000CEFA75931BAA987DC3EC987F43388C13E6
-:10A0F0000F234FFF4A00C7EABA2810CBBECD36CD9A
-:10A10000EDBF57FD1CC6E1CC5E9978AE981BA74BFE
-:10A11000B52731CE96EA716BBD618CBB619C6D0F2A
-:10A1200035E4DDB4BCCD95D80DF27BC6B33843829F
-:10A13000D06F721DC4AD7B1DF104A73CC51EBABE15
-:10A14000E07999550E75B1F89F5557EB0AE701DC98
-:10A150002DB3F3FAEFBB1277031EA01B09C66909E2
-:10A16000AE0397CEF6C763D1ADE4D7E8FFB3F331C2
-:10A1700085A44E36527AD2D45F1BD1816EB64E86FC
-:10A18000A25BD5187D3E1612B94D378DF653BA6DC8
-:10A190007E2DACA72A791ACFEDAA6285F1B95716A0
-:10A1A000F9BCDD54923EE77CDC048156DA6EAC5E8D
-:10A1B0001091FFF562E6098847D589B8AEF79BCACA
-:10A1C000A370D4BEBFA5FA7A8CA79B8A28211D59FB
-:10A1D000B5D03AECE776532F8F9F1EA8637EEBB184
-:10A1E000B6375438AF3960B4633E809CFE11B61F59
-:10A1F000E4FC4EAF9CC238F96091F3971E99F9F9CF
-:10A20000BD016F67A6E0FB20BE4F47DB9E7F00E8E5
-:10A21000A0FAF709F4CF48ED2E4A87666AAB80DFD3
-:10A2200063F5A6F86B90AB4D22CA5910E272129CEE
-:10A230008BDAFDE7B14D229EB3A635BF01F6FB696F
-:10A24000F34D821B91ACD5C2F962D5AB1B34DC2B2C
-:10A25000A9BD539B67E7576D4CAE83F9B2E8729383
-:10A260006B0BCE87B0784F02F879D72AA2833FE6EE
-:10A270005EDC91FD02EDF7CC7AB706AAE0CAC09584
-:10A28000D9EF803CD16D05FC6477D8CC82DDE4E960
-:10A29000F4119DBE0F4626D08E52231231C1AEFA64
-:10A2A000BF12CE17D51948977C68FD89CDB4BDB2D1
-:10A2B000495C80765933DB6F34FA0FF61B3566B78D
-:10A2C000AB245716FBBB77F2513C57561C76954C86
-:10A2D000F2E0C1EEDAB4EDC38D05F481554A934145
-:10A2E0003CD725D28D25ED6CFFAB9FFC8717F3F88B
-:10A2F0003E253BEC746EBF59FD14B3DFCE74EDFE0A
-:10A300008717A92C275C2C0E2A2BE66F605D4EF177
-:10A31000F3C53147DE4DC2C5D6CB19BE8E6166C1CD
-:10A32000DF06FF18F8D577D576E66711C3E6C7D004
-:10A33000F57E46CEF3B3ADFD2E6D96F62766F35A45
-:10A34000FC9E5889BC966BE584EC2A91D762ADD708
-:10A35000E14D2689D0F91D0D914C0FCCEF6693ECA1
-:10A3600004791588D1A331F869EB1C250A72781598
-:10A37000D905EB57970D3887EC6FFC1075148BE3FC
-:10A380002B87EDF2516E1EF738E67191CB6E87BBCD
-:10A3900048BC2A1B853846E47AC0637F5831603D4B
-:10A3A000BAC41B77EFD0E7CE2359C7F4862B9C2580
-:10A3B00085C6B5F879BBCB5CE68238BB629C4C8025
-:10A3C000FCB72BE8F73AE16F72F13C962891C13E59
-:10A3D0004BC13A81F5DB61B2BC31414B3E6820FA9A
-:10A3E00071DBB956EC2DCC677B4822C9791B09B9C2
-:10A3F000CE15657AA66D3BB37B3E40042904F00977
-:10A40000DCBF6A4D4DA07D9361CB2ED36E8E5C9BDD
-:10A41000A727AFE3F239FB3E11F9A8EDBD8BE11997
-:10A42000E076B3B63372ED8A02ED4385F5E407B802
-:10A430005C5FE7E2F6446A27E605F5EB37C681CFB5
-:10A440007D9B4D6317682D9011C847F1139B7D4C80
-:10A45000E5FB3AE0A7153F92B53896963D506CFE65
-:10A460009D76802B62CF3BA9F4DC3676E8FA92E346
-:10A4700038F7672BBF0D345F3E9F5C9C0FCD7CBDD2
-:10A48000CCDA4B69BEDE0DCC079214330171494919
-:10A4900020367B6B8CCB8BE465EF9D7850FFF94EBB
-:10A4A00058A752D044FF9AF85B98DD261BFAB505F1
-:10A4B000F0B7CE391FE379BCB1F48770FF1B0DB53F
-:10A4C000E3BED7A795D61FD6BEBA995CA342DCAE31
-:10A4D000BFB8FE18CDD71F4A58B4AF63EEDF53FAAA
-:10A4E000F5427CB6F814E1F1D2DEC0F648C9B8A056
-:10A4F000E37CC550CC07902FC5F9F685F3E1DB2846
-:10A50000CFABDBDBFFD2F33C0FC1AEAF5716D5D7D5
-:10A51000FFC9A64FB9BE7E0FF9FFDCBBC1FF4AE3FE
-:10A52000309E3D927E6A1E55F1720AE919D60FA639
-:10A53000301E03EB1BEC80741BE62B901841BD080A
-:10A540000D41DF797413F9E6E57126A5CEBECF483B
-:10A5500061AFAD1EE94C11C857837E816ECF1E05D9
-:10A56000C7B5F84D6D16CC27B3EC4B584EE08F14A1
-:10A57000CB4FB34A2B7E03C73867719FFAEC71E06B
-:10A58000EF693FC1FDA138FDF671221F8997D64FB3
-:10A590000E78E297F5370A9C0BCE6D279337F2F4CD
-:10A5A000DAFF71E813F3C8CD9DA847896840FCB273
-:10A5B00037B29D2428DE0384E9932128D7433EC97E
-:10A5C0002A0DFCDFEFBB74D65E67FE9DA8F238BD96
-:10A5D0005E99BF7717DD870AD93F4B15661F9FF934
-:10A5E0005CF20F9097901A1174D8DF4E75E5D07E0B
-:10A5F000DA915DAE405EDA72653EC2ED381455B652
-:10A60000E4ADCF1D849DFB5344947C3D6AAD3F2552
-:10A61000ED7E1EE89C4AB3B8C654FA9FF15C7FEA0F
-:10A62000B09401A64E0D5D5772FD9CE27ADB823B31
-:10A63000755832A1BFD490905942DB9F92CD60C132
-:10A640003C009261E7C1BC7E4B5AB2C9E599BD0995
-:10A6500005F4CCA92E55F8259D9B5B814E8AFF8E73
-:10A660007454019FAC1C5DF314FB7C5A74F643BE1A
-:10A670004274367FA73FFC26D27B9A3E974AC4930A
-:10A6800046B89EE80F17D6275E7EFEEA75650AE794
-:10A690003D38E8F535D9D7A585DF20CFA718D418E0
-:10A6A0005E831111E761B0AEB41EEBE3F360C1F558
-:10A6B00047D8796BBF1C572BC1C7A5D9F129368E56
-:10A6C000BA71A203B6F92A92E8688F227B5F8238BA
-:10A6D00002860E75F09F9E3A762BC4816FF69B42E0
-:10A6E000041E4E67BF43EB0BA8BF03F6A966668442
-:10A6F000C52D90D72911881B3F947C33FB1AF8A3F2
-:10A70000D4FF817A484F86DE077A289610605DED87
-:10A7100007E58F9D7FB0B7AD99AF3F5AFFD440FB9F
-:10A72000168843CA24CEE319A20EF97AB8F4C5E21A
-:10A730007A02B4E759F76CBBA2743AFC2237D956B7
-:10A74000DAFFDECDE053F41FE89D050E3F2BD46900
-:10A75000B7BBAB1CEFC7B8BC16F32BDFAD71E693EC
-:10A7600097543897555B442D03F0241982FD3678B1
-:10A77000A34CC08E9FAF6BDD10E22BC7F77D84E545
-:10A78000B9C11711F9EBEF4985D9B18B6E7F5C80A8
-:10A79000FDE93478D92BA19E330AC9AFD3EE1BD281
-:10A7A000A7309E38404E7434823DBF4BC4F3A4FDA5
-:10A7B0002D0743F9EDBFC7C7999D7FA2CB6BF1541D
-:10A7C00016FD79A5453461DF3ADFF977FAC9E5E688
-:10A7D000BF76B7DD2E3ED779F93120BEA6FCFC5FEF
-:10A7E000E838D6BCCD5D1F4C6F2EBAFD458CE38C8E
-:10A7F0001AA5F5CDDC797B09E72DD842CC42719CB6
-:10A8000057F83EE6CCEB53499218909FF832DB7F25
-:10A81000A4C6B591F112FA478A39FC0FDE4FEE1645
-:10A82000424EC07E2BEB65BE879B3824D37DD3B7C9
-:10A8300067C3217935E4679998E735DC65E2F399D8
-:10A84000F9778B1C5F81886BB95ED1F1FCF3908C3A
-:10A85000F68648CE421C846844B7E48E005CC7216B
-:10A8600019E3313ACF23A0A0F3A11D41BDB4129248
-:10A870003D6BF09C1EFB818E581CA693D569439CB2
-:10A88000279769225E725ABD83F2739F87D7755EE0
-:10A890000FF1BAC6EB515E2707B1EE53681DE2F225
-:10A8A000AEB486752FAF4779BD9AD743BCDEC0EBF7
-:10A8B000C241ACEF53587F237286F5EFE5759DD703
-:10A8C000AB795DE3F5065E27E36C7C37ABC37E882E
-:10A8D000751FAF47797D1EAF8778BD91D78571AC65
-:10A8E000179B3F6FCC44FECECE7F07E31B21DCDFFE
-:10A8F0008C3BEA9DB3F079FE687F972EE49F1FBAE8
-:10A900008AC49F56B9999E996E8B639E12F5175211
-:10A9100053F9E78E91C2F26EF27633E7E6610A5799
-:10A92000307EDD5D705D548ADFD6F3C4EF23FF4ACD
-:10A93000F8DDE0B6D63DF3CFA7DB0CC4D3D99FB387
-:10A940001DD85B24EF9CDE2B675210AFA13612FAA4
-:10A950003B2ED59ECF7A979B9D7376BB593E6B2F2E
-:10A96000C76FBA8D9D3FF42FF166C685B971C6BF1A
-:10A9700071B378C20F2C3CD509F47B7C39BA62D113
-:10A980000F627ED470ACBD4CFEBAFCFFF2FD656771
-:10A990001CE49FE11D1DC7EB2FCCA7BB66F4CD8D3A
-:10A9A000A9290AAB7AE873F067B470A42E3F6F9AB6
-:10A9B000BF278228A17E799BC259F92212F6CFE2E5
-:10A9C000C5752C5E2C71781C27CABE633057C13EFA
-:10A9D000439F37F17184B9FD3ADB65DDD56CBE3834
-:10A9E0003E567E8A449EC37E66F091E3C82FE7738D
-:10A9F000C843D6FC17FEFC42EB2EBDC8786976FE34
-:10AA000052AEFD17B9BCCC91CF22F3FA1FDD969D53
-:10AA10003261423E902547967C9DAF1C5DB09CC044
-:10AA200086D4525C4E522489EB46069773E5B9CB27
-:10AA30004B0139C9E6C3D7A8217E9E6FA0BC507CCC
-:10AA400064945B8DE153B32A8CFD09B0C697410F26
-:10AA5000BC0E7CA0F45EA286381F589CC20BE78C0B
-:10AA600079ED297188AF20095CEF33B8CD2A5BE717
-:10AA70009BDAEB18FE84F7EFC097F6A7E6F727916D
-:10AA80003A879C33BC3FA6B2F9A5F0F89DDF9CF154
-:10AA90006501F195483C25D2769FE2F04EFD659523
-:10AAA0007B397EC322D9CDBE938C93FCEF2A7DAA3D
-:10AAB000C8BF7B64EBCCA99F5C2057ABCF5FAE2AAD
-:10AAC000D5EB356AE17D87EAF92688F715DB774E05
-:10AAD000AA33FB41139FB7739AF7DF811E5A333BAA
-:10AAE0009F95E27B091FF75CF13D3517DF8AE4ECA7
-:10AAF0004DAE272AC56FF379E2F79203BF774BAECD
-:10AB0000DFE6FB51A5F87FEC3CE5E18773F95BD10B
-:10AB10003A12D573E3EFA7CE13BF5F38F12BB26EB5
-:10AB20001595F12B45987CC8FCFCA552FCBACAE3EC
-:10AB3000C7F3C5B6F69931B4D7D01FDFAF6EED4B72
-:10AB4000C9B3F89984E9F5731DFFDE8AC7FF509FEA
-:10AB500029CF8EFF05F543B6F165D94061AB74DCB2
-:10AB6000872B1D37F5511BDDCF0C7DD436EEF9F266
-:10AB7000FDCB158F7F938DEEE7866EB2D3ED373028
-:10AB80009FB8D271BF739EEBFD371C5F9FAAD9F6A9
-:10AB90008162F6FBDBDCAEBD45D56C725C0CFE4D14
-:10ABA0006EAF7CB042F853BCFF460B9F32F09FE182
-:10ABB000F87FA642F8DF717CD65788CF0FF83A2C81
-:10ABC000B67F7A39DF7DA023F3FC9A0BCD5BDAE503
-:10ABD0004E081E38E7FC7A177E27F8A6AC6A10EFFD
-:10ABE000241D04ED71CFAB8171965792E2FE7F2256
-:10ABF00025303D8CF12D57D8B09DC7597E972CC775
-:10AC0000CD42E76D210FD37F826674B2F5AE10C8D6
-:10AC1000432A06EFF3148EBF549169CC3F21117E75
-:10AC20008EF4F6757AC17302398E792D92A69071E1
-:10AC30003A4E5F68BB9E9FB71CB3F08998888FA27D
-:10AC4000317C14D9300BE529D77BD8BC5AFD58FE8E
-:10AC5000A1109926EC1E07865FBF27DE0979E2A9BD
-:10AC600090827CEA0BD8CFC7AFE7FDBC9FD3D7E774
-:10AC70002A9D27D63EBF15F3957A5B59BE924E0C9E
-:10AC8000CCEFECF397BED760B48BC5FF4778FED30B
-:10AC9000107C3F0ADF13C3F7A3CBA0FD57F13BBCE9
-:10ACA000D3CD62C9FB7102863DCEEE6BB27FCF631E
-:10ACB000C5E53DBAFDBB1E77C4FE5D8F6BBE8C79CA
-:10ACC0005D7D7E763E500E7F2BEFDD821B9493AA36
-:10ACD00056904F19DBB9803B62C7F7BDE31F6BEF9E
-:10ACE000734D6885F07AB7F8562CDE30436F959235
-:10ACF000CC30BD61CBCFE8E2F2E5AE5293A097A98C
-:10AD0000DE2DF2DECBDAFBE3981FA246E23AC6A3C1
-:10AD1000F93EA0C27AC8E3D3E7AD75E915AD7C630F
-:10AD2000CCEB107413CF1F555847C2DC7633F36A4F
-:10AD3000C9FD9FB644709DD4A8B84E047D1ABFEBE0
-:10AD4000728EB3CC631EF4C0F998C7BC0F4AD73BD0
-:10AD500052A2D07A19F3303DAA5E13D7D5067455A6
-:10AD6000D1EE71E2F12C5F7F7E0BFF9489F917958C
-:10AD7000E2FF7085F85BE350FC9F063D4BF1FF124C
-:10AD800094C5F07F8AEBA36AA277E39EAD333D4B77
-:10AD9000C8B57A7E7CDDEB65FD56733D45489B2D3D
-:10ADA000AFC7C5E9AA949EA3965E2B438F352EA507
-:10ADB000E7453E1FDF2B351F2F707ABC5EB66FA9AB
-:10ADC00087E33A5D9A6469917999E278CCF7F2B8B1
-:10ADD00052AAED9CE4EAC715D231353B2FAFF17989
-:10ADE000F945293A5EE5729596C8FA53B09F365AEE
-:10ADF000F90BDB6CF3B288F327EDB6E6A5DD362F51
-:10AE0000A1739C97DF5648CFA2D97939C3E725575C
-:10AE10004ACEF2E0FFC4E1DFE1F068272EF2FEB196
-:10AE20000FCECB9679E2A2B766767FA3709277CDEC
-:10AE30002CDCE7878F5B706E84EB988153BD79FDC6
-:10AE400091D4EB7D70FEDDCFBFFFF8C170E02ADE4C
-:10AE50002E88EDAE61F4D07655F9FD3F3BFCB2D5BE
-:10AE6000FF3C80EBDEF28E0517CE875BE47DC78268
-:10AE70008BC073E1F04C7FB5F9784C79FEA98FE572
-:10AE8000EB38F2BDB4CAF21D5CE104DEE7504D02BE
-:10AE90006989960332BB5F21458DEA27207FD69DC5
-:10AEA000C8920AEC2E5165EDDCD4DE82F3E3791A08
-:10AEB00039E6D1C10531C861FAFE4058467FE00E3F
-:10AEC0004FA2C55BC3F0C43C80D7983DD6ED6FE17F
-:10AED000711486D798EF1343D09F46F182FE3FEF5F
-:10AEE0000B1E03F883F50AE6F31EABBF13EDC4B1E6
-:10AEF0006E99C0FBB1AB15B413EF7B2D80FB70BF17
-:10AF00006C5C8FF90FA6A283DD7897F79D9390A7CD
-:10AF10003CD95DA50957203D887F4A24F15EEC9F0E
-:10AF2000D99D7B28FE900F8C5B17F4DBC1FC18C207
-:10AF3000F39CEFDAA263DE8C4ED8FD4D83AD0AE6BA
-:10AF4000298DD535B4C178F7B5AA6877DC774D433C
-:10AF500037E673B77A31F7ADDAAF0B90DF135CA742
-:10AF600010F810A43AAC7783DD1958EB853BBF4845
-:10AF7000751D1B2FB08CE03D7F2E928EC768191C6B
-:10AF800052F01EA7FBAED996DD09764D2BCB5FA6FE
-:10AF900084BD145B4B889FB392483F24808F6B1114
-:10AFA0003BCFB7E639989E695FF21C3198A9102E05
-:10AFB0005B195C6048C6FCE4B270E90AE13215C274
-:10AFC00065195CD9F37B9E4FA9D27F1087F338F3C4
-:10AFD000B1FDA5BF8B3BD77CDD31AF3DEFBA5C7BCC
-:10AFE0002B4FB71CBD70983983A7541EDECAB32BF4
-:10AFF000F6DE35FFCE087C97365873372FEF616544
-:10B000002D7F5EBB2782F745D6F2F7B5F7E0FD91BD
-:10B01000CE7EFE0BD7C74D245E721EAA39FE6F503E
-:10B02000DC219EDD2497C90770E6FB39F49E2AA730
-:10B03000DA71DD5EC3F28B66BE9FACE3DF8D906498
-:10B040003C86F12C33B872FEECFA716DFC3EAE1FFB
-:10B05000EBBB493A3FEC7B49879C38E5C2EDC84FD2
-:10B06000B9503979E53D9213D79054D1FA71A52B97
-:10B0700084CB540897AD0C4E19122AD22B4ABA42EF
-:10B08000B84C85705906D7BF5EE1FBFA703FC4B774
-:10B090005C97ABB67AFFE55EFBFB0D7E5B7D608D5A
-:10B0A000BDBDB2D6DE7E60ADBDBDB28EB5377C878C
-:10B0B000AE4AC52A5F27FFEB3CD749935A1A3ED0C8
-:10B0C0005A665DA99A07DA57CB3A81FB85E87E95E7
-:10B0D000E1FB56C1F8CF561F5BFF577B35DBFD7494
-:10B0E0007FE97436F918BE16BDE5F0B5F4EF3F4AB6
-:10B0F000DCEE2A92771F029D538B8F17417FC78EFC
-:10B10000BDB510ECCA675F5F87F79AF67ED0CA9B21
-:10B1100031301F523EE9FD38E8AD67E97E0BF93862
-:10B120001321E3F82560CF044402F63275A3F05EE4
-:10B130008F678FCA687FF43E57DAEF7FA68BE509E9
-:10B140003D0D7E3FD5FF47F8BD5B4FF27BB71EEF4D
-:10B15000D2B11CEF6AC2F7992E03EB0F77B562F9F3
-:10B16000509789CF1FECEAC0FAE1AE38D6EFEFEA8C
-:10B17000C4F2DEAE0496FBBB7663B9AF2B89E570F3
-:10B18000D71E2C07BB522C6FB36B887FBF96C6F2BD
-:10B19000D2EF4C8D5C0276925FC4EFC08AE1BF6251
-:10B1A000C21E77B8E4883DEEB03C638F372C3B6C11
-:10B1B0008F372C4937D8DE370E5D6C7B1F4DADB213
-:10B1C000D52FDA73B90DBE3ED96EAB2FDAFD7E1BDB
-:10B1D0007C6D629B3D1FACF3061BBCB67187ED7D99
-:10B1E000B0E5AF6D757FF31D36786FEC6E5B1DEECD
-:10B1F0007DCE87BFD6D7C0E281E1111B9CEC3F68B2
-:10B2000083DB35DF7CC4B706F2F183685F3EFBAABF
-:10B2100080F95DF3161BAF03DFC92B12CA13B99275
-:10B22000E5C3CF6B485E06F7941139B9EEBA40F921
-:10B230007BA4AD788F146C4D80BC9E795DD0C1DE4F
-:10B2400015827B964D1690C7DDA7936402E2923C6F
-:10B25000CFAC7121314DDACE4BF5091E2E926476BA
-:10B260002FC62D45FC8EEA312181F926D46636FEA3
-:10B27000B30679F4CEFD77C3CF7787F17E04B4CBE4
-:10B28000DB0EB44E0D51F8F1150ADE7733075FC7B8
-:10B29000FD76BFF5313F78DF5E16AF6C7C7E7D8337
-:10B2A0000A76784B621EB8AA337A23FB33FC4E2908
-:10B2B000A01B6BE10A80402C4D763603DC0913E2BB
-:10B2C000B614FE6BBEBCF1028F9F4879E9F3E547E7
-:10B2D000128DF0D9C4F85E162F1D1F5E2ADE4AC7F4
-:10B2E00069C82E1797A2BFF324BBD77D48176FA557
-:10B2F0007AA1E1505CDC5A806FE37F2A1C4F9DF4F9
-:10B3000049D87EBC3B83F7CB79B3DFC47B38AD79BA
-:10B31000F135EB6202FA3D9C10C15E1BDFCBBED360
-:10B320001B17A20B239CCE6E079D8017A58BDC0AF2
-:10B33000E5434971AB9F3D6F0CCCF60BEF77C2FB39
-:10B340004C4ADCE2AF887FA6179E3FCEF9772423D4
-:10B3500096E49F7EC2047EAB31CA3FBD14FFEE6708
-:10B36000FCA37CBBD53F975F33F0295D5CDB9CC7BA
-:10B370006FDE1EF8726B01BECEF089B64F60FBA87F
-:10B38000B89A8F0B7C68A074EF2CD44E88F271327F
-:10B39000F671281F6FCD8BA7C39F3F2F4FC48287A5
-:10B3A000BF8EB53C4F91D2ED9A0CED84EFAFDB9A96
-:10B3B00013780F70BF5FC4FB85FAFD5FCDE23DFDE2
-:10B3C0001A41BD29CB66CF4FC22C0EDD23145AA7DC
-:10B3D000763F01BE4CC9FF9EACCF6FE5E197B197B8
-:10B3E000F8BDC212BF575891E31D51B69E8D6E3203
-:10B3F0001B5F9D3BFE41A45B8AD8F7DFBE5DF67DF7
-:10B400002FA6DD8071ECDE7065DF0DB973CCBE5404
-:10B41000383EAE9C8FDD779CF3209E666E1E969B19
-:10B4200073212CAFC82DC2F79B72B558DF986BC43F
-:10B43000FA865C14CBCB7397E0F3F5B9E5586FCD82
-:10B44000ADC6725D6E253E5F9BDB80F535B9F55864
-:10B450006FC96DC17275AE0DCB55B90FE0FB95B9D3
-:10B46000ABB16EE4AEC37279EE5A2C9B721FC7F774
-:10B47000CB72D7637D696E27D697E46EC67A2CF7B8
-:10B4800029AC37E63E896543EEDF6319CD7D1ADFCF
-:10B49000EBB9CF62FDA2DC67B0BE38D78BF5FA5CA2
-:10B4A00037D6EB72FBB0BE28378CE5C2DC7D58D6B0
-:10B4B000E6C6F0FD82DC0358CECF3D86CF43B947C8
-:10B4C000B1D4725FE2F7453F856530F7352C03B99B
-:10B4D000AFE07B7FEEDB58F7E5BE89A537F7029634
-:10B4E0006AEE1896E5E6A9DCF74F9BC93C9B5C6CBD
-:10B4F000CA2DB4D5374CDBF7EFF5BFBAD8565F3756
-:10B50000B9CA565F73F2725BFFAB4FD8F7EF95C7BE
-:10B51000DF6FB71FB2F6FD7B59E606BBFD7078877B
-:10B52000DD7E48FFB5AD1E1DBAC36E3FA4ECFB77B0
-:10B53000FD1EFBFEBD283962B71F761FB4C12F2048
-:10B540000F3AF2C9C76DF055E6D336F840EB571DF8
-:10B55000E72B19A6FF8D6FD99EAB4DCF173C87897E
-:10B560001DBA1ABFDB3F5D27F27B86F8BDADFC7EBE
-:10B5700034E77C56733D302FC7FCA7305F7735B07A
-:10B58000EEF2F29EC0CE88E6D919F31AF4AFBC48A9
-:10B59000EB67162B4637AD5B7686055FF6772B1487
-:10B5A000633245F174BDEAC67BE78460A70971B5D3
-:10B5B000BBA604DCEFAB17119E1FD1D1C1E213C4AF
-:10B5C000BA4F07EFF719ACB7DEEF7C1FBE8FB2FAA8
-:10B5D00071FFDEAD10471D7459EFBFF43E8C7378D8
-:10B5E00058FDBFFB770DC0FBEAAA8908ECB3FB8AC4
-:10B5F0009C6FFE4FBFC2EC7DBFF923FF9AD97BA69B
-:10B600005F09275EF2D3E7B7A9898BE0CA6EB8E776
-:10B610001EEE71DE2A9B3F01B86B65F3653FEE0BB2
-:10B6200076FFE15AC87D5D83F702FE0CDE4BC1A3B5
-:10B6300098DF5FFD817BF0BEAAC100C5C75F1C9F7C
-:10B64000FFE69766F61B62ED370D184F457B7020BD
-:10B650004AF0DE8CC1503C05F7F9A5BEA792270C35
-:10B66000A03BCD9295787EE2E072DD920BDBFE444A
-:10B67000483C0B717C5FC2AF83BDE6272730FF22B9
-:10B6800048A6B1D48826D8EEDBB6E8AF67F4C3FD90
-:10B69000FF7E3C87378F4E629C3549F8FDD56FC1E0
-:10B6A00073CA9733FE35C5F97295740FD1E8F80F58
-:10B6B000537B12E87898307CF773FF5426C97823BF
-:10B6C0008FF7E4DF2321BFFA4D941B2BDE234B1BA6
-:10B6D0003BF07A177E8F4307FD07F6614DBC74BCC3
-:10B6E000C7796FC3B9C67BC20167BCC78FE7C9A75B
-:10B6F0009B4B7F0767C57DF63797BEB732C3FDBE4C
-:10B7000087F979EF43FCBCF741EEF71DE67EDFFDDC
-:10B71000E0F7E1BD5ACCEF3B007EDF32382F366DCB
-:10B72000DF978C16B9FF251A12B89CED41FBDEC7D6
-:10B73000EF2BA29E2BDAF35E6ECFF7FA7BE6C3FD0A
-:10B740000CBE10C9809FB0FBEA71FC7E969262C06D
-:10B75000FD00B7FFFA8DF9FF8ED6631162BBDFC91A
-:10B76000DBECB82FA1DC3872C6847E7DD46F481B19
-:10B77000C5F973CEFDAA19E239AF7ED93D3FD6BDDA
-:10B780006DD4034F81FCF9806E0DE4EADB38CE699D
-:10B790003E0E91361EC7FB0C2F934929399833CEA4
-:10B7A00039CADFAE80E3F7291CF2A7CBA407EFA9C3
-:10B7B000E1DF43EA7EC39B1F5FB1E4B0B799C51FC9
-:10B7C000BA5FFF18FE6EC08B355B17E6FB7FD6773E
-:10B7D0004ABD2D0C8E5A7DB8CEF7779FD43FA9CFA6
-:10B7E000C23D65C169A5E3194F5870A30C2ED06204
-:10B7F0008885EEEFFB22DF4FBEEC3353819AD9717F
-:10B80000F59E8E1B504FAC51F17CC6D9EECBBEC419
-:10B8100050202F3FC1EA3FBF3DC85789F6E952ED9E
-:10B8200017DFDDF17352BAFDE1C09AE2EDEBEEE80D
-:10B8300078B00CFE99C2E3A71EC173A608FBDDB267
-:10B84000EE5AA501FCE57D6BA8BF4CE7E1C5155B91
-:10B85000F15ED9BED02B7A2139A2FD7EA9145E9467
-:10B860002F9D65E8FA5AB9F64269BABE5D86AF27E0
-:10B87000CBF0E58552ED295F0F97C1FFBF16C63F9C
-:10B880007511E01DA863F1BAEE7ACA57F0D7D6B0A9
-:10B890003884B51E1E1F2BCAD757CAF0A59CBCFE04
-:10B8A000E202E5F58D52E35720AFFF5486AFE5E4A1
-:10B8B000F5AD62F28AE7A4E72FAF42F0C2E4D513F8
-:10B8C0002CCDD772F21A2AD5BE0279AD2D857F050F
-:10B8D000F21A2D34BE9B508508F67E333B17DBDD14
-:10B8E000C6EE237335B17DD7F7EA17D13EEAA3FB45
-:10B8F000D3BC56D8A7A7EEBFBD65765F76EE3BCE2C
-:10B90000FE9CFBE6EDFFFB49DC37037CBFB3F0F1A7
-:10B91000E8CE7E4ADF6771AEE37AE17798F27EDFA8
-:10B92000E2E2C7EDDFAD5EF878F67DDDDB42C7A76A
-:10B93000EF091D7F0B9E233E83E7884B0F5DE8B820
-:10B94000A5E19B1E727C8F7B8E76C02D41BB1DDADC
-:10B95000B0E76B8FE0FD23BC9F06D9C4DFED93C930
-:10B9600095ECBE9321962F24EDF9CA23A756E7DD67
-:10B970002B4574313F3F481A9A78E4541E1D39888C
-:10B98000F7B0F832E62DC6B4CBD19E181C2D6DC78A
-:10B990007E99EFE3CFF0F38BA7B91D7B84E72D3EB3
-:10B9A0000976EC3238C760E717E360C7629E632B05
-:10B9B000CF7334799E630796CFF1F3876F751DC6F9
-:10B9C000F747BB32587EA3EB08965FEF9AC0F75F4C
-:10B9D000ED3A8AF589AE2CB38757DE897A66960EE2
-:10B9E00067DCAA341D971DB5C741564CD8CF312E00
-:10B9F00039623FC7589EB19F632C3B6C8F832C49A3
-:10BA0000DBCF311A87ECE718BE26FB398647B7C76C
-:10BA100041DC91F73BCE41B639CE41ECE718F54910
-:10BA2000FB39C6A2DDF638486DC27E8EB1A0F36E3A
-:10BA30001B7CC8ECB17F17DF6A8F836C9AB69F5F5F
-:10BA40006CF8D583F6B8CFA43D0EB2EEA43D0EB28D
-:10BA5000E6C4576DF5D5C7EDF18F0FFB122F823E6F
-:10BA60005D9975C641264598BF9FFBD9F99FE55F53
-:10BA700053F81F80FEBC4AF2673750B97FEC28BBF1
-:10BA8000DFFD31C2CE3309F90FE82FC833FE8289BA
-:10BA9000FA47E2FA67ECCAA957C09F91F7337FE7EC
-:10BAA00076615D56CDF7775CFF28E4AF6B4973FA9A
-:10BAB0000D65FA970DF473E432FEC8DC7E99DE9AC8
-:10BAC000BDDFBC25057954F28C3FF201873F523728
-:10BAD0008CBF6335AFB43F32679C73D4436F058B23
-:10BAE000F8C31111F967F923FB5AB83F42D87752CE
-:10BAF000567F961E1A8B945E87D63D2D63DC6F9120
-:10BB0000FD85CFB1AD7C99B196CAF2BA7F1064E7DA
-:10BB100049149AFBC3FF5F3EDE4DF9B8BCAA88BF4B
-:10BB2000FA1ECB4731B873950F197406C6236F19E7
-:10BB300084EF985C50BF7CB6AEF07AF0DEDBB642A4
-:10BB40005EC81EC2CE75C8CBECBED57278C436DED8
-:10BB50005432FFC18AAFFE496379BBB1D69B306FC7
-:10BB6000F2341DA3D47DDACE3C0B299C841FDB83E9
-:10BB7000EFD80B9EF7FCB49AE593C73A3F51D26ECB
-:10BB800071FE1E58CC2C7DBFEE30C7FF85D716A0A6
-:10BB9000BDBA6F88E963B973C5F3208F8F833C1AF0
-:10BBA000184F5197035D4332DEA7E6D709C6051744
-:10BBB000FB49A63B0A7C3552708F17FDC373E5190C
-:10BBC000F91CB2DB51672C3EC54BF3B5ECEF19AC59
-:10BBD000D7312F4DD649520BE1FA216F84113F5CCA
-:10BBE000B783AD06FBDD3B8A8FA6CD6DEFC4CBB925
-:10BBF0003EE55D57603CA941B0D6A7CF803C9DD3C0
-:10BC00007E7FC97BDEE6F47B8EEBF19939EBF19A0E
-:10BC10009E9FC2B8A32C7E44F6D0BFBC734E677FF4
-:10BC2000D67AB4EA2FBC76177ED732387A07BBAF04
-:10BC3000B88EDF0B36CAF46331BCAC78D0016E1F0E
-:10BC40003E71A8BD07F8DB47D74DBE3E5AF2B71F7D
-:10BC5000F126D8B96235944F1E66DF6B2F7D6017D1
-:10BC60007FBE039F1F68DDD68EFECF21620259C1C1
-:10BC7000F5A754F67E4A43F8F0F471B81769299590
-:10BC8000378885DFBBB1C584DFA8AC0A89ED504A8F
-:10BC9000A393A877492B3197E830AE8CBF9FB33878
-:10BCA000451E057C168F2646403E499A18F0BE2A4E
-:10BCB0001CDF763585AFA282095756A7087BBF38AF
-:10BCC000A9E1FCC5461307AF06F86682BFCB45DF86
-:10BCD00063BD6EB786F93FBED1C921B8F79A8EC150
-:10BCE000DFD33A7DBF30C1DA074627D35BD02F9927
-:10BCF000799FDED202F70EB2F7F228A507DE4718C9
-:10BD00003E29327D02DECF0FB3F7CA28DB1FEFDDFD
-:10BD1000B803EFD3A3E3E37D532EFEFC31CEFF58EF
-:10BD2000E73B27601C2B1F2345E2B67BA99CEBDE7B
-:10BD3000FAFDBF5E6EC7FBD4455F3895771FC33EE3
-:10BD40007E5FB577D4BE3FFFB18AEDB3C7B89E29F9
-:10BD5000772F1B247A839CFF0B555919960080007E
-:10BD6000000000001F8B080000000000000BC53D14
-:10BD70000B7854D599E7DEB9F3CA4CC29D300993CC
-:10BD80009099DC840422043A814041512711111515
-:10BD90006D44DB066B7508C8FB11514BB4DADC90BF
-:10BDA00004921060B0AE44E43189A2A8A08382D28C
-:10BDB00096DA01B3145DBB4DAD456AD146D0A808F3
-:10BDC0003452517657D7FDFFFFDC4BE64E2689D61D
-:10BDD000ED6EBE4F0FE79EF7FF3EFFF9CF19C61875
-:10BDE000FB2A17FE5795C4A2058CFE285F99CAA2AC
-:10BDF000B698FCFC4C637930D7982F1F69CC7BC672
-:10BE00001ADBBB2F36947F7E1D631D4EC8487E1BF8
-:10BE100083543A7AB3AD6C3463B5EEE5943F7FBB9F
-:10BE20005E1E48C27C9E7CD28EE58F5555D8582127
-:10BE300063AB3C330605E1FB57F87779EFB4A19A81
-:10BE4000B1A895B135D5214A9BAA5B286D2E6222F7
-:10BE50002B666CED6831DC96C3D8EAC219D45FBD9D
-:10BE6000BBFFFEDAB0BF118C85AB6D946EAD96A9A9
-:10BE7000BFCDD51E4A6BAB154A37551750DA52ED78
-:10BE8000A77A0F554FA434541DA0745DF5342A7F52
-:10BE9000BEBA8CF2BBABCB297DB63A48DF7755CF23
-:10BEA000A7F4E9EA4A4A9FACAEA2F4896A95D2EDBA
-:10BEB000D50D94AAB2C8581AACE74A7F6619CCFFD0
-:10BEC000D12B5979A4B0F7BC5559E0F56480E578D9
-:10BED000C6925828CADC882FE84B61CCDE10623647
-:10BEE0008047E662F886F9AA10B342DE3387E7D7C7
-:10BEF000E138D0AE8AB100C28D15B0F076809B4D8E
-:10BF000009B159305EC0ABB21B92199BAE8D83DF75
-:10BF1000118E6A8ECA105F272C81EBE434EC8751B6
-:10BF200079FEFE8E8388D6311D91524C0B0F8744CB
-:10BF300009D291532A579A201D345915B1FD2A8FE1
-:10BF4000582AC078E7AAC4B009BA568AD94113E47E
-:10BF50001F2B14C34D307E73091345C46306E05193
-:10BF6000E8596FD2F9AD2C3A0EF05A3563104B00F8
-:10BF70000F3D1D3A5FECA147F82F2398D443AFF053
-:10BF8000DFEA50FFEDC7EC110DF50B77C6B52F8436
-:10BF9000F6FDD0D3C8C78CED0B362719E6B3DAD33C
-:10BFA000FFF8F9E7AFA775F645B7A72C153F43B8DB
-:10BFB000EBF9F4F397B1E860C6DE72CA84CFD46BB4
-:10BFC000EFF3040B69B82926A007298B859B04CCC5
-:10BFD00006D86C80AB19FED524F33CC2DD04486A58
-:10BFE000F223BB2A019682A93FC0C6601AA0FC2199
-:10BFF00073B0591E8FF932FE5D0E121D345F045D61
-:10C000005C8CFD6437042643FEFBF0CF4CC6AE0FBC
-:10C010005D344D85FCE7E6A05805E3AFF5727E5C24
-:10C02000E11B9B84EB7EB4B97F7EACD5F851CF9BEE
-:10C030009C0126403FB90DF258A4A3BEDA3DD8209A
-:10C040004E0B27E8F729A45F987F7DC30C391F5753
-:10C05000DD8E328B31AB9311BDC5D787F53E85F0B0
-:10C0600035BBF93AD36E2AA3346FE7245B19F0C3CA
-:10C07000E7C9FDE3AF316EFE76183292605E1F6A4B
-:10C08000F3CA7BED17241F3F1FDD3F5DE972EF7C94
-:10C0900058641D885FA98CE469DA4D419607EB5915
-:10C0A0000DFCE244B9F7E58D0D3980577583487270
-:10C0B000409F7FFCB826A5B34484F2D5071630050F
-:10C0C000C6377BCA985A88795D3E4718F6EF707676
-:10C0D0000470BD0E160A98A07F475550C5EF168F05
-:10C0E000CA90CE56675CA84FF2764D481411BEAB8D
-:10C0F000B2C4301328654EE4F76246F9E48CE702D7
-:10C100002292CD17309F09D00FFEDB84F05699881C
-:10C11000EBC8677E27CCCB56D01D10A17E1EDB1747
-:10C120004579602B61FE26E49F8C2301A45BF50E0C
-:10C13000E6CF27320F923C6252D086F22AB7650CC6
-:10C14000F1834D8908B8EE1F5882EFC5F28BC5C345
-:10C15000E5D8EA2F4D09E5EABF6A7231A90FBC396B
-:10C160005CBCFC73B3720DE91BC8B725A023B38B6D
-:10C17000CBF13679C6EF0B941EBED4CBDFC2458E11
-:10C18000EFC9E79EB7D0BCF36EFAF1205C4F5F7445
-:10C19000B04AA3AFF583B8DCCD9B7C6900E17D0E8E
-:10C1A000E6DA24F4AEBF609042F5F4BCE434CAC7CA
-:10C1B000AF3F3F89E452DEA97B381F78FBA7577D4C
-:10C1C0009E9F7B8DF6809867233D5D1F12492ED57B
-:10C1D000BA459602F9AD481F3928303BED17C17AB0
-:10C1E0006C6F9818E27B6B55A9A84279728E142661
-:10C1F000FAF37447519CD9257600E903F0ABB8D225
-:10C2000010EF13087E59C51101E9FA94A617E1AFA2
-:10C21000CE0374E6E34B46FE1EE182EF819D02975A
-:10C22000031E2E07CCCCAF5A717CD0881118CFF1E9
-:10C230008689BE331689DE0FF92459F4A3DC5C5BD2
-:10C24000BC321DF9CDE162A4BFE65FDD46F209E430
-:10C25000AA7F13C8D1A51F75A52F837C9E87CB5DB0
-:10C260001D1E498516835E18701C291C403DE9106F
-:10C27000983FE4EF1BCEDFB85F5B98D9FFA17E410A
-:10C2800061A4135F687F3B549A1FAE1BFAB5B25F7F
-:10C29000D138E7B47198E9D861846FD27724664ABF
-:10C2A000C01F7D8E63BAA55FFD50756CC1EFDB6367
-:10C2B000E8F73657B2BB6B14FCE3BBECBB5FA18263
-:10C2C000303989BECE813D81E32A367610F375CDB3
-:10C2D0006238117F7C5E3DFFF7ED80BCB59A5EAFA2
-:10C2E00079D75A4AF4395E0C5BA17E7BDAD4CCCE86
-:10C2F00018BED0E5706D31D70340DD0CF9616DCD0E
-:10C30000516581D253EF49BD9EDCBFBED8AED76B1D
-:10C31000E6F5928BFD623041FD27347E7AC611B876
-:10C32000CF35BE675C65E5B49B490E8DB73153824E
-:10C33000F53DE308D6B962F858EF3FB63DD26F3FFE
-:10C34000ED9B5D697DB7F7DD3BED2DD67FFB07FBF0
-:10C350006B9FB57CDAA601E6BF39F1FCD56DD82E0E
-:10C36000D9636148E7351996DC06C8AF196FF15BF0
-:10C37000010FEDA3A77A106F75AE234A227A827E51
-:10C380009FE86F5E0097F201D6F5EC00702D17FA6A
-:10C390005FD78BFDB507B81E1D002EBF1900AE2D4F
-:10C3A00003CCFFB789DBABD938EFE42C0BE9931A48
-:10C3B0002FC0D58DFC0070653DFCF0D8863EE1FABB
-:10C3C000FA40F436C0BADE1A002F03D1EBF101E0D7
-:10C3D0003A10BD9EFC96F47AB60FB86EC3797F0B07
-:10C3E0007AFDF25BD2AB39F5DBD16B726AFF72601A
-:10C3F000207A4DEBAFFDD7A0576FA2F95B9923A030
-:10C40000A2FD53C8F5F8FC1291F4BAB980EB5FC7EE
-:10C41000B127488FD6819E1A3C11F5F5F187961603
-:10C42000F7E8E778FD13DF5FBCFE5CFAC9E3CC8E6A
-:10C4300078D4F49E3E1FBB12DFCF8FFAB5E3BEE97E
-:10C44000B8491E16B58FE9693FF2318BC18EFBF6F4
-:10C45000E319F57B52318C8FFE0418FF8A89A857A7
-:10C4600077FA912E873FF86DC7EDBF7EC16663FFF7
-:10C47000DFD41E98950AF680A3C71EC8AD7A7EDB6E
-:10C480007B837BFAC995024C06BA91D814B2DB586B
-:10C4900003F36FC7E2AADDDBDE1BD7630F0047881B
-:10C4A000B89FD0C7313544B6BD17B38EF37398B675
-:10C4B0000FABA47D4F9E7C7112D2F1EAE6FEEDE255
-:10C4C00067343DBE53F3373D85FE264877A0BF094C
-:10C4D000D2C7D1DF04E963E86F1A81FE29EE6F6AE3
-:10C4E000427F9315ED0FEE6F5A85FE2648F7A31F86
-:10C4F0000CD25F6A7EB07DD5614A5FA8DE41E99EBD
-:10C50000EA08953F57BD8FF291EA28E59B8B7E4262
-:10C5100072A6671DDC3ECF93757F5DFFEBF8CE3EC4
-:10C52000E33E6274C4E82719B523D590BF289C69FF
-:10C53000A83FA225D7509E1F1A69281FD630D69033
-:10C5400077145C6CA86F574A8D74E5B9C6503F47A5
-:10C550009D61C86757DD6CA8EFADAC30940F9DBFEF
-:10C56000D0509E115C6EC80F29BFD750DF15586997
-:10C57000281F34B1C9507E69F70386FC251F6E322F
-:10C58000D49FD4D96628FFEED1A70CE5E33B9E33B8
-:10C59000E4C71DFEA5A1FEF71CC128CAC3A2E8413D
-:10C5A00023BFB04E11F1D79EC268FF6387FD7B2089
-:10C5B000813DF95F83F83ED6CA4691BD7B0EE459B2
-:10C5C0005311B6AF0CE1FE3A17CA9A14DC9A8705EC
-:10C5D000368CA1AF286A4F89E5876F260770A78F31
-:10C5E000F57DF0877CF95FFAFE75875DBD0CC7CFDE
-:10C5F000E3F2589555D207F1ED75BF50DE8E998361
-:10C60000B0BC4E2E9513C9851396E089583D11BFD5
-:10C61000DFCD0B24B3008ED7A0FBC5B8DC33F12AE5
-:10C620002CF7D8558705F483958F49C5F5E8FE9C0E
-:10C63000D51ABFD66B7C6A6597A8E8AF38A7EDFB23
-:10C640009869B2BF3F39150FAF6F2AD7BE488DDF4B
-:10C65000E74C8FBE8FE33748E144FA524F75799625
-:10C66000F7C66DFDE24787AF8E4793DC1140FD6A48
-:10C67000532A5985B3379C4C599C1EFED9EB1E3A60
-:10C68000D828CFCFB1C2D240EED7586FF9ADB40E93
-:10C690001D9FF1F5D655F37D5733E295CE1164CD4C
-:10C6A000DFCFF12B4E0CAC44F8A6C03E1AFD02A21F
-:10C6B0003FCA3A13CC7BD044237D25FB8D72D051E9
-:10C6C00060948392D32807CDFE4A16413F2D8CC338
-:10C6D000881E830CFDB6F81FF19F3C10DF5D121021
-:10C6E00062E87020FEC321BE1A3630BFFEA3FCDD17
-:10C6F0003E279DFABF47E36FE0689EAAEC75A49FB2
-:10C700008A891A0131E5877F81792F386C263FCFDE
-:10C71000E55F6C3BB405FDD113AD32FAA3190B1DD7
-:10C72000FA3594CF09D8CA30BFE0D8688B0FCA8FCA
-:10C7300064021178B0BC2C05E5C069264E433FDD8C
-:10C7400069F67ACAB81839B764B085FB7F1ACCC7C6
-:10C750003B6D38BC4AE753B787785E5FD7BC16633A
-:10C760007E2E9B912EC138731F34A3E4630B987403
-:10C77000BC538703D0C18F07CBB49E79AC72950CA4
-:10C78000E3D69BF9F9CC9217475B100F0BC6C9395A
-:10C79000A6A29E79DC3D98FB014F02BD29D69EEFF3
-:10C7A0000B9D610BCAE5137BC6FDE01286FD845725
-:10C7B00065A25FD305F688D21BBEB31B8CF31C6841
-:10C7C0001DF1F3666C25C1A3AF79483B844022FF7D
-:10C7D00079ED60C180C75ADBCFB675C23C03B51294
-:10C7E000B35F0679899F1FA9C792C3DB517E975615
-:10C7F0003ED1097050575AE55A48373A7EF62CD642
-:10C80000AF0284E1F9D3CEC10AF79FDA7D613C5FC4
-:10C81000007DF3DD19C9DFBEDFDDFFA47E5FC07ED2
-:10C82000D37AF7BBC4D669C173B46552E5344144C9
-:10C83000BF22AF6735070343D19FB8AF283A5431C1
-:10C84000D46BF89AF50E0BB95FABDE34B19FFECE18
-:10C8500068F2EDB73B1FB5A0DC3AFDD4BBD7E3BE11
-:10C8600068D1AF4CCC06F5CEEC4C6651B2FBC2168B
-:10C87000B45F17EE3105C2948F4EB8313996AF6B65
-:10C88000A9FF45CF26D3BE6AE173D6F07468BFF026
-:10C8900085136318C883332BBB0F0D45F83D2590D6
-:10C8A0001DCDD4CE3137C2F78512BBAD2C81DDF161
-:10C8B000678D1F4EFDC2518EF426EC38702BF51B90
-:10C8C000F9A1D91AA3C73A069B099F508FFCDBEA4E
-:10C8D0009342385FE0F3BB6174ECFC6A78BD27B922
-:10C8E0003F77E13E73D88EF3DBD16A0942BD653BE9
-:10C8F0003E21FABEE2D95D29088765FB4C06B9B630
-:10C90000E8D92F575D0C785E6462DDD3498F7F4193
-:10C91000F973015BB789E450204500B9B59444161A
-:10C92000D47BFE83A97F81F2931E13B3832838D969
-:10C93000F1BEE557980F3A2B991FFB37F2E1B21D74
-:10C94000272C382F5964DD59C0E8977D1AC397AC5E
-:10C95000777DC6BA2D286797451A3F3101BD2DDB7B
-:10C9600073FA2DA4BB6571FC7C12FF91D15B5F0A49
-:10C97000EE787DF9DA0486E7F43B601334A96F7D25
-:10C98000A9F3F7A25DE7B6AA30FEA9E73EDEAA0248
-:10C99000CA17FFF7DFB7FE14F7492FD965944BCBC1
-:10C9A0009EFA530A8B817F969B9F279D79F289C7B8
-:10C9B00037011CCEFCD94A503BF3EB0F7C0AC0FD7B
-:10C9C000CCEEFF48C7F3A5BB7E7DE510A4B3BBF654
-:10C9D0005E31A4BF7D05D26DD81A8BDF30F5AFEC88
-:10C9E0008371864076BF96C6E1E5D4EECF2D784EB2
-:10C9F000F499C0BA51FE2E8D7C6941FBEC508075D4
-:10CA0000239C5EDE73E2D0BD903F0D78B226C0134A
-:10CA1000AC7FA8487A253A14F5CBD23D377EEFD2C9
-:10CA2000624CCD7E05F1C4BA49DEF7C2EF1B80DF50
-:10CA3000E21EFCC6979F635F5810FECB76023EC78E
-:10CA4000205E019F637AE3F334FE63526F7C5ED213
-:10CA50000B9F8BB76DC2C23D8309FF7DE173C9DEB9
-:10CA6000EFF76B67E9F2612038CF17F8BCACEEC086
-:10CA7000B56EE4B3E71CAA87E3393C1DCACEEC3A95
-:10CA8000E74367C887E6EE5B110EDDBFB6CA786E76
-:10CA9000BFF0D76F12DF9DD9FB070BE21FFE528458
-:10CAA00009906717FE5E67905FCA6D70B684754F18
-:10CAB0007DAB1853D6ADFA097F943F047C48F80843
-:10CAC000DF304D41F91B4EA3752F0D73FE581A3EF2
-:10CAD000709330A637DCEBDDA276FED3835761225C
-:10CAE000E2F3DDA9487F7DE1535FBF8CEBFF2E941D
-:10CAF0003F66E4DFF8FA4B815F717FD40BBFE1033F
-:10CB0000FF8EE99956AB24802D7406ED04676FBC47
-:10CB1000F7C09FEBE76F6A1F57C7D187DE5E87D3E9
-:10CB200040FC3ED0FABE29FC96B815031DE9703CC6
-:10CB3000F545627DF088263F96B2CA6999C37AEBC3
-:10CB400033132B53870A3DF35D1531919C3FB5C3D9
-:10CB500044E733F1F262299EDB2618E74937B763D1
-:10CB600096EE3B3006E5DAA983BFD0E892D3FDD23A
-:10CB70009DEF5A544D3F8463E5731FE7C0CF6BF3BD
-:10CB80005EB63F717FCB767E92B0BF9352E087381E
-:10CB9000FF931D66A642172723A684710B5BDC66F4
-:10CBA00083DDB52A79C2D141B82F48495270DDB52D
-:10CBB0002B036FE2B9A8FABA99CEF999E4FFD00A2B
-:10CBC000E5B5C9490AFAF36A53E63225468FD7C557
-:10CBD000C149F294D1F99DE42E2BE67BBAB0E1BCB9
-:10CBE000D70C04113B6FD0BB59A897DE29FAC08C33
-:10CBF000EBFC6B9C1DF95789AD1A02FDFD5515FC28
-:10CC0000354AA2FD81B1FFE07D26A6C4F4BFD4DA87
-:10CC1000FD0ECE87FDC6CED02E33BD6417509E2CA0
-:10CC2000DB6AA6FDD732D85621DC3ED8620FAB9026
-:10CC3000DFF87CF5ADA897FEB6D5CAF05CE2E5BD9D
-:10CC40002BBAEE41B9F488C0D09FFEB75F547F86FF
-:10CC50007A79C166581DC893798EEEC7B1FDBC675D
-:10CC600087B25A68FFB11099809BD9AEB4E804DC52
-:10CC70008774EDCAF0ABD4CF8B4BB1DF33CF3AA87A
-:10CC8000DF33BF7993C639F39B64D26BFAFCC1DE04
-:10CC90005662F538D8DBCA053E207B3B260FE32CD5
-:10CCA000C23CAF2F7CA5C93C947F8B3005BA5FB4E2
-:10CCB0006F5000FDBB31F5A89F65D6EE9FF869FF68
-:10CCC000AD668AB4778A66223F2EDA611CFF3FDCAC
-:10CCD000DCAE5A66E99ECBEB873239DF76503B4BB0
-:10CCE0009A46AF5A797C7BBDBE94966BA8A7B75F76
-:10CCF0006A659589F8C0A5F5BB68C797238CFD7157
-:10CD0000BAED3D0EFF7EB7C0C87FC276DB29EE6C60
-:10CD1000B1253A3C15F8F6050B9B8FFCBB38253A3C
-:10CD2000DC05E3FD4A939B8B93200FDF33B57960DD
-:10CD30007DCC335BE719C4EB9217ED74AEB2E4859A
-:10CD4000373F437C9E421803C64EA5757CF653A020
-:10CD500083535B4C4C057B6D8935EA7B04F5D46EBF
-:10CD60002B6B43FE7EE915D25BA79FB38AFD9D53D3
-:10CD70002F890035D87AAF432D6505954E8CB709BC
-:10CD800088ADB86F386C0AD7C0D8555260E5B3B8D3
-:10CD9000BEC366DA679C9DC30A705F799665FA55D3
-:10CDA000C2BFF2A604E52B5E350B89E290CCE741C9
-:10CDB000A88F033E387F2D532095CE0FA37485A5F1
-:10CDC0007204CA5D930C8B2B243F01D9ED66B79F8B
-:10CDD000CD8374452A0B22FC98F39A0BFCF57B401B
-:10CDE000E9F2879521D86E521A972B73D20357A672
-:10CDF000917C71CAE457D2E854DDCBE7F9B990E4ED
-:10CE0000AF8179E59DBFF73684EFF2770525F6FC13
-:10CE10003C3ECEB34A52DE548A69BD248FF2E424EC
-:10CE200086703D2BF3B8BEB3739441AE18B9BCA65F
-:10CE30005A26F9D158EDA17475750153C8BFE6A7FC
-:10CE4000BC495BBFB550A53835E469FCB33ACB02A9
-:10CE500068E7E19CF2153CEE0F121D593D95E49BED
-:10CE6000B23919ED634D4E95CD83D4ECE4F03139F0
-:10CE7000CB083E162D2FB54C2778427BFA7E797A67
-:10CE80007011C2C39635D220972CEEB1867C2F78D4
-:10CE9000E9F8DFF57F053746706AACB651BABA7A61
-:10CEA00022C1ABBE3A40F9FF07B83DC0E17631C6BA
-:10CEB0005AC4C0ADD490EF136E0F03DFB863F90608
-:10CEC000E0887CC392FCDB13AC3F3E7DA81A17C7F9
-:10CED000D803D52D94EADF53FBD0DB9FA4713BA090
-:10CEE0008A056BCC74BEC5FD2DCCADB2AC093DFE40
-:10CEF0004DE651998279E455C4CBD12482DDF2B755
-:10CF0000EDE43736C95257AC5C5B7E9D3204E59741
-:10CF1000A9EA517662708C1F6D7A995D21B8FA0585
-:10CF2000F4A7D66A7AB3FE02FE8C7CB0A65AA1742E
-:10CF3000ADC60FEB357ED88078867CAD9F9F6F366F
-:10CF40004F63A417FF05F27C1F1F65B171262E7F6A
-:10CF5000246A067C938C54288D529CEF516B381FA9
-:10CF6000E3A80A19C5D1B98EDE43FE63C6221EF4BA
-:10CF7000A7B934B8B1FDB9AE99C9B43C33D73BCCED
-:10CF8000C4D39019EDF178B8D6FA0FDA707FDDD7F7
-:10CF90007C4ADE5920E0789FCF243431F72D91A3CD
-:10CFA00015B00E67B383F46ABABF321BFD7BEC98F1
-:10CFB00095E8D3E90F0AF362F097DE875D7767FAA9
-:10CFC000D57F45FAEB4459067AE88196617684F379
-:10CFD0001A73C483F26E8D8BEB0FA51CA0F0DD9E3F
-:10CFE00076AF687230A5D8C8EFBA7C95278F35D058
-:10CFF000AF2E5753A718E95C97ABCFA7717FC59C9D
-:10D00000F4B24FD2201D7C7E33F1613CDDE7C917BD
-:10D010009707DDA80798BF09ED35B419D18E7B5766
-:10D0200008737AE7FEA9B39D396D68E7C0AE80E466
-:10D030008A8AFC4078EA7EF92B68B74B930F2B6DF8
-:10D04000336CB8DE06A02386E77A403F08E07540DF
-:10D050003F9886807E387F4CA454A74F4F7A8E210C
-:10D060002ED0947748E4F1F222F99E25D8DF396179
-:10D070003CE9C0241BDA7B92D97F18E55477B218BB
-:10D0800041BD59EF9C610BA0FFC6554C78FF2CB9F0
-:10D0900022BBBF3827B05BC86F2B3BFDEC388EC37B
-:10D0A00018F96D4DF25886FBC45DCE8E24DCB7585E
-:10D0B000D345C3BCE6A407BDE931F9D138BA862F00
-:10D0C000EC7697D64FFC7817A56B7ECB2C95056236
-:10D0D000CE2DAA74FA5654362586BF57E64F6518EA
-:10D0E0007F11CFD77DCAADEDDF4E6ED56687095F64
-:10D0F000E67879E10639EEA45415659CB777CD8FB3
-:10D100008A88AE2E4DC7FDA1B3ED821D72796E02E5
-:10D11000FA3A3A7208C5675ED033B06B2E243DB33D
-:10D120007122B747343DC3F5D3D96607E9A7B37376
-:10D130002A299EEA6CF31005E9EEC0BA4BC6203CE2
-:10D14000E69E6F640ACC6FDEF94994CE6FF939A57B
-:10D15000152DAD40E48CD5AC9DB76E26B43BF1B037
-:10D1600089E283BAC2E3CE5441BEABD9CA4C304E39
-:10D17000D7E63BB3D12FDE05E3A07DD5B5399FE8D7
-:10D18000AB0BE046F906637D8C0B36015E2A18C7AF
-:10D190000BFC2F80F5E7BE626A4D642755ACB706DD
-:10D1A000129DEF5C286F496CB7D5E23F33F07F9555
-:10D1B00023105E25EFDC938DEBD5F97F452AC8233C
-:10D1C00084D73B5696C81F7F79FA9573912E2F4FBF
-:10D1D0000F2CE578494DE85FEBA17F3EEE0911EC9D
-:10D1E0005BC24B30E506839F95FB314F68F62FB34A
-:10D1F000F5519EA2B59713972F69FEF8D0FD0CEF5D
-:10D2000029549621D1EBFB691383FDB480FBDF1B0E
-:10D2100028FE599F0FD8A944C70CF081F2658EE60D
-:10D22000EF01B87FCF02DF4FBC6212903E7AE8294F
-:10D230009882768BB0E6BA95BBA0FCEF87F9FE6CBE
-:10D24000C1F90D24EF8435A3374E82EF77BE6226F5
-:10D25000395FD374C9FA5B00BF9FBE66A2FCFCF3C2
-:10D2600076AAF7D1FDFE8DB740BDEEDF99C90EFF5E
-:10D27000F4F09514FFF891D9E827983084F3F1F38E
-:10D280001A3FCF3DBF86EC0FBD7C6EC36C8B4274E2
-:10D29000BA8EBECFC5439B4C9CFFF7FFAD44C2F393
-:10D2A0001C46F7149E7FE8866B57925E1B4BF6FE7A
-:10D2B000BCB5567FA278D0E7D31583FC99D7D94C5B
-:10D2C000FD32B08BDCE95A7F317264DEF9C1C407EC
-:10D2D0004C5619C619CFD5E4C985F96D361BE4C97A
-:10D2E00047F6C47E9097D3F93E6AEEF94B88BF7A31
-:10D2F000AFEF32FA3E571FB793F363CF7A364E4AF9
-:10D30000B49E9E754CA6FA1FB9128F7F52836F5739
-:10D31000F57C1600B95461857A4E1CFFCE55138BEF
-:10D32000711DAE5421665DF35A16B140CCBAE66D5C
-:10D330009E65A988E9B7070FCB0C783899BE90F0A5
-:10D3400070677AD911E49B8A35978E417A9CD7D23F
-:10D3500048703E61F6FB50BE7ED072674AA238D854
-:10D3600093F1F869D1F003F66E710C7E74BCC4B70A
-:10D37000EF7A7BDE6718D7D4F530376EFA82572FF5
-:10D38000BCE524869B3484E3AD0BF46D90E0A6BC31
-:10D390007014E97AADC38F74DD37FC46B1607FF05D
-:10D3A000EBC37E057BE74B943B12FA68F11CB28518
-:10D3B000D3C14070EB1957A38392C4EB197B613D35
-:10D3C000554C05863D6E19880E7ECA545B3FEBB8FE
-:10D3D00040073F37D0C1D88D4DD7AE847A1FA2BD4C
-:10D3E00032A237FE8F5BD4948BF1DCA7C944E74AA5
-:10D3F000C793D4F49B79BE08E5F1F194D0F5784E4B
-:10D40000A3E7176CCF4F991533EE070D008704F093
-:10D410001B3B4431F8A12ED04F9ECA0A27FCF3E8EB
-:10D42000E78439F13DBECBD34B260C413B2594D844
-:10D430005FABA7BABC360D725ED867A2FE3CEECCDD
-:10D44000FD2C0CA5F5E9C1D221E3317EF427B7A16B
-:10D450003C387E5C207D5BF3F68A11A8D7E2ED04B0
-:10D46000D87F36E0B9E70A537288EC50A9721B9D49
-:10D4700083AA12DB5E8CFB94CA4DEFE5A3DFB08A72
-:10D4800052A6D9A12B4C23FD4DE497AD7C02CF4988
-:10D49000814864AC2FB14A3A3705415886F98D0E60
-:10D4A0007EEE5A25D9646B4C5CC2624D9ED757976D
-:10D4B000FDFC3DF443DB5426A7637B2E3725C6EDE8
-:10D4C000AFFFC479C6E87B8B3928FB711F2AB032C5
-:10D4D000E40BB314A47B4E668FBB488DC1C3C2213D
-:10D4E000DC7EB4B7B737E4407BFBEDBF93510F5AF6
-:10D4F000611CF4B3D9B2A4B3B1FE6AB33B42F7984E
-:10D50000585ECC77B0AB9C859037F80160BEFDD8F3
-:10D5100085BF12FC9ECF901E6B383C26228820FDD2
-:10D52000F39C61AD2897274A75268C3B9A797B3E00
-:10D53000E537CEFE6A7867027A98B97F7507DA33E5
-:10D5400033F767CCC6F38399CEE1EF630ADB055B63
-:10D5500012B47F5960912648A7D81EA5B8C6973542
-:10D56000FF583BE663F462BB466F60E74CDB0DE9B6
-:10D570004C5BC87C47618F3F2D7EDC0D1ADFB79B6B
-:10D58000236923910E601C5CC78FF787BF0FAA9F8A
-:10D59000DD12095F371AF0732BEB36231C834CA680
-:10D5A000730FDDAF5BC1FC5A9ED1FEF42F8BCD6DA6
-:10D5B0004827F1FDDD12E5FDFDB81DFA83F4D6C361
-:10D5C000DDFF8A6A391891A73A584C7FFBFC871C0B
-:10D5D000AC777FF170F64B36931A03574091180BD6
-:10D5E000F75EF01D547E0D1BD3379FF5C09BCF23F4
-:10D5F0001E1F9F6211F0E9234302BB906FEF1D12C3
-:10D600007806D3C5B66E9F047473C41D7C0EF34BAD
-:10D610004DC1EC7480C7696F70441AC2A523F1F93B
-:10D620006B3C7FE7959FDE827C736B8DC410CFAB24
-:10D63000F67EB005F9F2B419F808F6032FDFF341CE
-:10D6400032D2CD1260C05879F24E553ED94F67F7AD
-:10D650008CE8F7BEC93B9ABFE4558D4FF475DE8662
-:10D660000C08E3DDB6C741FB99DBAA4C17F6594815
-:10D67000EFB755F1F81026758CB9C96077D669E710
-:10D680006CBDFBC17D447C3F5DD5C16DC4F752705C
-:10D6900002DADD27AAE76F43F9123F4FC5137C7BFF
-:10D6A00008E9B75986B8DB39CD0BB6C5F2A15EBF24
-:10D6B000B60FF9BA7FB8B64E1B1F8F29DF29714EFE
-:10D6C000A07B99F4678FDADE1562E861A0F158DE7D
-:10D6D00094C005B940F7E545E64CEFDD5F7C3DBD04
-:10D6E0007F4FD515ECC4385C5FE0DC90F103CF9F31
-:10D6F000793479A6B5D3BFDB83218676A1FD8B4132
-:10D700006427EC1FCEFD0F9F6A760173C27A91C128
-:10D71000421B03FF1FEB8581E95EA67DB335615C8B
-:10D72000519A47E274133954624B30BF5EFD452570
-:10D73000F675EAED1FCEA85F749391BF6B7812ED7A
-:10D740006B2AAA6A699FDD08F203F541FC7C8E37DB
-:10D750003DA2A01EB05B420AFA451B87A7E7AC8436
-:10D760007620D5C8EF634F0A2952EC77CD1F645F4E
-:10D770001952707FDB989F49DFF5FE1A052E6775F9
-:10D78000BE68847DDF73E417F37B66605CE91BE1B0
-:10D7900069C9D0AE6D158B9A7C8C1DF4658EC27DE7
-:10D7A0006EA8DE42E77B8D0562C61CC8A7786DE4D3
-:10D7B0001F6B754567E23D5A559048BF865CCAD5D8
-:10D7C000C9E8DF5D39A403E5DFC13B2CB4DE359346
-:10D7D00044DA8F592F7E2F7405F67F17F3A35E6D01
-:10D7E0003BFF7C8B13E5F051D8CFA2DF103B0579CE
-:10D7F000D436EDAC1DF773A918570774B3D91CA123
-:10D80000796DAAB152BF9B5A2DE589F0F77E864407
-:10D81000F5C34227C5070F66113BC2F58169333650
-:10D82000E641BB9C3C26E37E7E4DE1596DBF19303D
-:10D83000F1F328DD8FC8ECDA79964D3BA7B2C5C667
-:10D84000173E12DA43FE43C7F4084FA789E47F8EE0
-:10D850009FC7520FF7E33926774C433DE1281699CD
-:10D8600080FECD3C26E0BAE4696D748F39A780F55F
-:10D87000D19EAF5B0E40FB62DE1E7D42F2D76C3F55
-:10D88000D7C3E30CD7A21F0ACAC366BF7035CC2327
-:10D890007C9D2CA84A4FBD6A0FD7AFDBA0FF28C9DB
-:10D8A000D130ADCB57108922BDF9168B84A7B513A3
-:10D8B0008FD3B9C003C5BA1FD54FF3D85C73E4004A
-:10D8C000DA5F9BEF6664276D46190AED365FC7C2C3
-:10D8D000FC3C8965A27CDBB4C0722D9DE71702FC7D
-:10D8E000054A13CEFB4719365AB7EFBE07A2784F49
-:10D8F0003FC9CFEFDF429AB07E6D8689E6BFC91C73
-:10D90000CE40FF485F743143C387AF4AB3AB58C8BA
-:10D9100083785DA7C187DD3496FB17A480121BC7EF
-:10D92000D5A34FB81F03D64771AD83EB2CA48FC48A
-:10D93000E9D199B8AED4020BBB2A07F98BC34D1DB0
-:10D940002DF2B833166E41FE6CBD289DE249578B0F
-:10D95000610FDD132FB5D079F2C189E2CCF950BE49
-:10D96000BECE427E08C813BF8402B9ADC86F8EC94F
-:10D97000A5E5F321BF41B6C808DFDA42D98E745C51
-:10D980001B106501F2EBCAF47B128CDE3128329950
-:10D99000EC0550BE2D43441F2DDB2608C4EFF58156
-:10D9A000D2D030F85E2FBB85583FC05E0DFF8BB2E2
-:10D9B000CBF67A906F020F8486291C97D20422310D
-:10D9C000FA4B66D1F91873D35AFFF851BA0F556460
-:10D9D000A3FBB3DEBB42E574DFF1228B82786D3BA3
-:10D9E0003F7814ADAFCEA2203F6F10C25723DF6F38
-:10D9F000BEE3908A7E75FBFB4E8C1D66CECE4FAA91
-:10DA0000317ECC596C893BC76222CA717D5CE71BB1
-:10DA100051A2A74E21F8C764F2FF143615B8299E0B
-:10DA20007902C273DDC56F15CC4D4017D0DE993E2B
-:10DA300016ED65313A610CCA29AEC7982467C4E275
-:10DA4000778337F3CFE867DA5A02F3C7F1AABA6EE1
-:10DA5000A179058EFC14ED2AE7B18FBE4C3CCFD7DF
-:10DA6000498F241F7344C531982E994EF6596C3D49
-:10DA700090FB8DD981BF7A00BEBB6AB8DC6FBE9DBA
-:10DA8000D1BB13F8571003DFE64290D2F4000140F7
-:10DA90001EEB15CAE4475F2D2A9128C2738C8DE8CE
-:10DAA00069080B925C8B5FAFE358E31D1877E4F0D5
-:10DAB0001BE77956C32FFE49E9745E819628B3644B
-:10DAC000CCB1A3FCDB3D56C9C0FDF603AEC47AFE63
-:10DAD0004F197C5FB44B486C9FFF2DC3CEFB075999
-:10DAE000199D40A86214D70779319DCE6DC8C96DC4
-:10DAF00015B95C60D730D27B29459D767FCC784FB5
-:10DB00006BE3D01FF433486BC7E4EE680DACBF1570
-:10DB1000A816EFB5A578391C9D6A0F1CB1BEACAD37
-:10DB20000BF8A06644310251A6FAACCC42E72220A1
-:10DB30000DD5AFC41E38246BF5374D94041BCC2B88
-:10DB4000178021407DD7348BE11C45AE3BA262F9A2
-:10DB50004F4D4C499DD833FE9622165E09E30F0ABD
-:10DB600018E19D7CD70B2BD02E8FA7039CC1857EFF
-:10DB700031547C8EB15DFA2DBDF880E049F304D0BC
-:10DB800034BFC1DA2C0094E61D921E1F4BF277BC05
-:10DB9000A943457F280624ED85F98F7CF28DC04E80
-:10DBA000C83707399F2517BCB002E9D291C9F1F4F3
-:10DBB00047F42D43FA0893FF8E713B6A95A8203EE7
-:10DBC000B64673498F3732A90CF1D458794444B919
-:10DBD000BE660FF30B02D2FF7F5B63E77753460EFF
-:10DBE000C7BBA490FC937CFCFEE89A42D181F2F57D
-:10DBF000E01D2F90DEDB724064C8FFA5BF3DF6B08C
-:10DC000003E9FACF56CA37BF524972E327D04E4DC7
-:10DC1000E03F1F482FC7D7CF5BD226E0F944F6FC80
-:10DC2000C82BC3513E8724FF55888FF91D0184936B
-:10DC300052CCCFD99CD3A3F44E88825A0D6C522576
-:10DC4000A4A5CDBC9CDD944AFBA8D1D6CE866B6042
-:10DC50007E8F3C2931D497266B24631EF46B7AD1D6
-:10DC6000899AA0D7FEE891E9D10C94E3499514066E
-:10DC7000DD6B7E6F67703EF44D575E1D0EFDBA265C
-:10DC80007358DA43430EA0BC449B19EF553854AE89
-:10DC9000E7D649E100C679AFBB2B68C1F199B67FE1
-:10DCA000695C52F138C2F984A6F758E57C7AAFC4B2
-:10DCB000A7F18BA38A9524DA673DE049E2F12DF7BD
-:10DCC0008B07903F7C0146FA43AE8A4447687A1935
-:10DCD000272EDFF75C23EA17E76291D6B14EEAA858
-:10DCE000C17725D6DDC5E41AA5777FFF68FBE51966
-:10DCF000567E2E8A384EEB5907B9E440BEF9E62726
-:10DD00005E4708C71DDFB38E247D1D059D94D7E7B0
-:10DD1000B12D10F95AF3D8A0AD634D067FA7C851B5
-:10DD2000D849EFB3C4CBFB958E77E8FD9830D8EA9D
-:10DD300026BA8F16B906F3CAB322E3F7B58CFCDD19
-:10DD40002BAFD155FC7785C58C938374C7F10C74C8
-:10DD5000A7D94FC077361401A2F215F93142FC9DC4
-:10DD60009C387AFCA7CBC5D87943FFC90D4CA0B825
-:10DD7000B8C54C29CDE82D179926176D4C8DA2FCFE
-:10DD8000FBBF968B2007492E36C34A07C34E25B9E1
-:10DD9000BDE90ED4E3BA3C1C8F38C177A254F375A9
-:10DDA000A585B42FA27CD1C3AF36D37B43A276DE48
-:10DDB000A5C105DD500897CF3D8A419F3E84FF8075
-:10DDC00075EC6E4FBDB610C6DB589E5B84FB0B7BBB
-:10DDD000E845B20F7C853C7EC557C5CFCF1D797312
-:10DDE0001F8FBD17B730C342F4B750A7BFAA900723
-:10DDF000C75987FDA27CCEB390BE7C8445B83ED483
-:10DE0000ECD3168F1647ACD1553C9FC4CBA771BF3E
-:10DE10007397A27CCF10AC32EEE7503F1F4C37EA2D
-:10DE20006BA4175D5FB774AC74A13F2C47F3F7E7A1
-:10DE3000D88C710E45995C5F7FA5F901568B95B41E
-:10DE4000DF544B45DAC7E9F477418FC7C1311E7EF5
-:10DE500048A8AB26507C0CE5534ABA19F2EF56207D
-:10DE6000D90D5066CB5034FB402638B7FE581C8B7A
-:10DE7000F272777B851DFDEB82CF7635EE0FD70BE7
-:10DE80002C8A72737DC9EB1457D254053DC3A29CF2
-:10DE900005E22CCB98DE78063EA6FDAA43B576A017
-:10DEA0005F2B126DA3B885A6F0A1998CDBB10CE3B2
-:10DEB000529A0A56662E44F95E50568CF86DADB7EC
-:10DEC00050DC8C5CC012FA11DED7F631DF548F398A
-:10DED000F4FDE5E2C4FBCA6B32F9FE362281A8826A
-:10DEE000F96415887EE4FFAC3A4BC2795CAAE1295B
-:10DEF0002D93DF0F6BAD3F9441EF63899561D61F82
-:10DF0000BE60FA2BD363F031A90F7C78747C483A59
-:10DF10003E5CB3880F3B3B442E6F49AFAD63F2CDFF
-:10DF2000A81FD54A0BD9B18D66BE2F6F2BD4F842EE
-:10DF3000B6B522B17D53BA4E5922D23D1CEF449161
-:10DF4000F6898EC5CF515CD323ACFB1594778063E3
-:10DF50001A2FBE7D79A6A8C15111FCB49FE67804A2
-:10DF6000BCD27C36E7A7B7C6F2E9039A1DFD8087CD
-:10DF7000F3E9E6FA87884FBFEE3C75B95DABD9D1BE
-:10DF80000B02410BAA0355289B9A81FAF331E6470D
-:10DF900038319393ECF20FB1498C5FF6CEACE0C20E
-:10DFA000CC98F345395049EF165E89EF0A41FB0FD3
-:10DFB00022FC3EE80791E74BE8DDAD2023665EC01A
-:10DFC0003A04627290A1DB21EF912254EE990F7313
-:10DFD00071D1ED48CADB6CA0176142A7ABF9FD8B8C
-:10DFE0002EEDBDC8C7B5F7223FC6F721211DDDB212
-:10DFF000BAF4111C4F918228334EE27B9178FF795D
-:10E00000E25B14177D0A646D930BE3617E5542F762
-:10E010004FEE65B23809F36B4B31EEF9CE97ACDABF
-:10E020003DC98E9578EFE55111D60D6DD648A0EF1C
-:10E0300087615183501943C7BB2EED48C173BED3CE
-:10E04000911BFBF51FE3FD417A2F3393E369836353
-:10E0500029DD2F9BEB8CFAB0FD81DD4F3CBE09C65C
-:10E06000FB78AF8DDE35D9E858EAC3F28F1F7ED337
-:10E0700087FAE2F4DE372D89CE27974891A9788F69
-:10E080006CB13A88AD84F99744665928FE64E7017B
-:10E09000BA9FB6440E5AB0FFC52DBB293F65E71F96
-:10E0A0007C58FE6626D713A733823EF44BE4B5585E
-:10E0B000A322E89F5DB9A18509CFD933456DDE2F35
-:10E0C00051FF1B1D2F1D42BC9C7ED84A7EB7030FFB
-:10E0D000FF96FA3DB5F7459AEFC7BBDEBC15EDE9F3
-:10E0E000C58CF9519E9FB66B7E3D5B474AECFE7630
-:10E0F0009F060F3D7F3A59DB07670D504F3B8F61FD
-:10E100004E803FDD1FE848C1FB851F9B831684C7F7
-:10E11000228407A425000794FB8B2202CD73514B68
-:10E120002BDDB75AB487FB071701BC082E2D0768F3
-:10E13000FE4732B9DC38B5F78F3E7A9F628F95F68D
-:10E14000CFFABA1739833E848FBE5E80035FF7AE85
-:10E15000AF87A7B93A9E5AFE40F35ABC87CF6BF1FE
-:10E160004E3E8FB97B004F4EC4D32CC2FFA9BD4C8D
-:10E17000C17B305DBBDF3C89F6CCE9BD3605ED0ADD
-:10E180007D5E59206E53C6221F717DCCF608A48F88
-:10E1900099D441E7394B6459C6F7092E94872D610C
-:10E1A0002E4F3B4A8742F9D30F8AF48E25932323BF
-:10E1B000D1BFFA61A67EFFA7C3877EB15D9786882F
-:10E1C0003E3F4AD6E02D75F8307E66C3D0E0879991
-:10E1D000B1F878F7C591B8EE15A6CADF7A719C2719
-:10E1E000787CE8E7B9957FBD9FE63DCC70DE189F4F
-:10E1F00002DC52F0FCBB406441BA97BCE7E5A4D80E
-:10E2000073E82F33B9BEDAE87887EE239EC6F71C91
-:10E21000693E118AD31A1EA8F0E139DF47CC19C430
-:10E2200073D98F1F7B99E26DBA3274FF5307D53BC8
-:10E23000B5E7E5544C2BB4787816BE91E418C0B11C
-:10E24000C13636917CD4EE1785F9BDB13302084C46
-:10E25000D4135B7438575A6618CE75B81CCDDA9C47
-:10E26000D34EFE9670E2FB66F1F237EFC14974AE11
-:10E270007C8E253E57665A9CDC0A5312C5DF6C74AF
-:10E28000FC8CEEDF56A95619EFAF1CD7E4E27BDA1F
-:10E290007B0B9F27A5A822D0CDF34383DEA169BDC8
-:10E2A000EFE156AC59E243F856E0B9076D6AB65D46
-:10E2B00087F1845D694C7B9F9445097E66BDFC5F58
-:10E2C00078B98BE78B873EB316ED13842FB7531FB6
-:10E2D000BD0EE31ABB7278791996437E566659E1F2
-:10E2E00050EE3711E81C89995D5D36AEC213C1A3AB
-:10E2F000072E12EBD2ED6AA83C7B2823B8427F138D
-:10E3000086D2BE1EFA1BFDEDFB03BCABB6D4FF8567
-:10E310007E6CFF5BFD44482F89417CEB0ABEF9B956
-:10E32000FE7BB494C94DAE6FDFFF3FDA7E852920B6
-:10E330007E8474384824BAD7F9BAEBE11145B8FFA6
-:10E34000B734DC1145B5D9955C6AC980EFE7147E16
-:10E350007E72FB831B0CEFA8EA69FC7BB5FA399E41
-:10E360006598F17C76D5502E8F560DEDF113E2B9FC
-:10E370001C1E57D1C619FE9AD3291486DBE9AC526C
-:10E38000C4F8C382761BBDD77B11034101F31FC5BF
-:10E39000A222EAEFD1AC93F2DF411040BE882926D9
-:10E3A000CC8F63DD3E69189E3F4757A19D76C41D03
-:10E3B000AC43BAFDECE18E770428FF4966F0979DE7
-:10E3C000E8EF1CCAED5427988548CF32A64087A2B3
-:10E3D00063BA2791DCBF004F593A157BDE76831470
-:10E3E00058C7F9224BEE72F4C05997070BB5F7974F
-:10E3F000F4F6279F7C2297DE1DEA7907BCDFFBC07D
-:10E4000073AB163CF8D8B87ECA3539BBAB267C73E3
-:10E41000ACBE6FD3E0BC7DA868B00B6154B2E39E84
-:10E42000BA81DB4FBB2E0DAC7C14E56D8B89F6D326
-:10E430001FB5FC91BF8753C6C8AEEB6BDC8FE2F013
-:10E44000FED1F62732F97947D8A0DF173CFE8B9131
-:10E45000B1F1960066C53D81BFC341783FE457AD39
-:10E4600026A4D232F2C75858258F53C1F90EC3F7EC
-:10E47000B822943A5907A529AC9B5299C9E49F4EFA
-:10E48000657E4ADDAC8CD274562970FB2E44692619
-:10E490008B509A85F629FA7B5837A50ADEF88C89C5
-:10E4A000DFC8C513D361F8DE6E19FF1E171F2421C4
-:10E4B0001EC72590E7717141D28E2A92E7181794F2
-:10E4C000EFEEFD9E822EBF370C2DFD13CABFE787EE
-:10E4D000068E20FD1C7EE6557EBF62AD40F6F50936
-:10E4E000FB748B02A87B3A3540EF80A8222BDB0E11
-:10E4F000FA7D8EEEFFC73F3D4E1881D96C3E151B4D
-:10E50000BFC36CCE023C2F9EAD559DAD9D83CCD636
-:10E51000FC20F8CE19BFA7E7A7FBF6B3B5F387D960
-:10E5200071FE1716B21AFC282AFE03D6313B24D0FE
-:10E53000B9C1ECA4E92F75B2BEE924A63FBAF757DA
-:10E5400011E7871AD09F15979F13DFDE26305B3ABD
-:10E550007EE7F4F4F4650AD975BA3F0B084EA1764C
-:10E560000DD677C92F14BA32100BA7E42CBE6FB5A5
-:10E5700087AE4A49F4EE929ECE01FBCC9CDABB3DBD
-:10E58000EC085DC8F7BA1CD6E93C0737B6C84705A2
-:10E590009684EFAEEAE91A4DDF37DD1F62386F7BF4
-:10E5A000F41E7A8FFA6EAF4ABE5A5B6198EE07246A
-:10E5B00015843D6A82F935E13BCEC05F4DC9C67313
-:10E5C00093C5599CFF1767F1F3DD4317A597E279CF
-:10E5D000F66A85BFEBBA5AE1BF47B03A6BA0F7C8FD
-:10E5E0006D867BF2AB066FA57780EC5F6C63684F3E
-:10E5F000DAA5C4F7526ED2E0BA41ABBF71F056F261
-:10E600009334E4F3F3FDF8FA07F21FA2F71F1B732C
-:10E6100060BF8BE9FD2AF55F9FFF5039B6B7451BF8
-:10E620000DF7797F94C5E59A6D0FA747539E259CFA
-:10E630008BF4208528BE40AFD7D8C779D2B42CAE92
-:10E640008F9ACC61BA27D3A4D9438BB31CEBC82FC4
-:10E6500097D57614F9F55C1EA3F3467BF4493A4747
-:10E66000B01558985DD07E0F00E33B0A23841F74D9
-:10E6700036450D741BF3EEBDA977FF755F853CB879
-:10E68000BEC69C108D3FD07A2FD5E0D9A8E9D746D9
-:10E69000BBF11C6DAE86EF2B75B8EC67244FFA8189
-:10E6A0000BD97BD336E75E8FF3B1ED1B108E86FA64
-:10E6B00039AC7C50227E8997FFCE4231EE1D2581F8
-:10E6C000E6756E8FA0BDBBC8DFB1E8B1032216ECC2
-:10E6D000F75F37571CBC1AE6B330E80C60FCE41354
-:10E6E0009BDBE89EFEA217CD149F30BC7316978368
-:10E6F0002DFC7D45FD7DA38B5AAC86F7A696B09880
-:10E70000F71761BC45C73E3AC6E89EB1F1BBFE6E45
-:10E71000C01AFC90204E2DFEDD8175597DBC3B500A
-:10E7200098D84F13FFEEC0CE88487A6339C6B1D26D
-:10E730003E606B29EE7BAA8E09E437E8CD87CA9646
-:10E740003C734C5EF0133DAAC94981ED09F8E94FCD
-:10E750005E4E0FBBF0508DECFEFBD645B330AD6383
-:10E7600078DE547B9724E3B9766D3889EE97D4CA66
-:10E770006218E346BCC9A536F43F329728E33DB49E
-:10E78000A9A6C974EFC972B7348EDE696D5BD881F2
-:10E79000F7EA6A3D12433EF6BA781C01CB10E97DD8
-:10E7A0009A3AF975D76CDCC739F93DBD6C99851576
-:10E7B00001EDBA00C3F365D8AC5446C1F4F20A8146
-:10E7C00028BE77C52659E5EDFC9D99EB8B26901F59
-:10E7D00098FE0EB44E8DFE1AC709D8CA10FF53EE2C
-:10E7E00076933D18F69818C6011ECFCA21385A9262
-:10E7F0004BA36FE3FC663AC8B71B56C554C4C32B82
-:10E80000ADAB665C05DFCD6189E21D0ABEACBDF92A
-:10E810002A68DFDD6AA1FB163A9C943AC9F07E8330
-:10E82000EF3E63DE12F75E85C462CA21FFC72CED9E
-:10E830007C9295B3686C1CAF3BC00FDD6527BD5B58
-:10E84000D709FC49E71F5AFE4F5A7E87394478DFC3
-:10E85000F1B640FED583AD73B3495E3A966E73E070
-:10E86000BEF0283FC7EC4B3E3F9AA5E8EF7CD8B5F9
-:10E87000772AECE8F78AA7A7BA6AE6C738435BB8F5
-:10E880003D6914E2F7B0997E3FA05E938F9293CBDF
-:10E89000719D6EE2D3FA38FAAB37FB0B4250BFFEE4
-:10E8A0004B93B66F3C797D7432863D28B4AF3667A2
-:10E8B000313FB287D9DD9129C33C46BD68F1E3EF12
-:10E8C000334C7DB67010CAF9512FCF24F9867042AF
-:10E8D0007C4955163FDAC9D62AB75F1A87F59C449A
-:10E8E00097679D16B287A42A4788ECAFD6091E25E4
-:10E8F000765F512DFB2533FE6E8D8DD2557DC8FB85
-:10E900006C9758867E578B662FBBBC5C9EBABC0E3C
-:10E910007EBEA8AD739BA4CE407ADE0674837137A9
-:10E9200007EEE3F4BD3CC3467A73F92BC386F4E7E4
-:10E930001F7CBCDAE3CF03C06EBDAF82FCB625F707
-:10E94000BCD78874B73CD926231D9A52866F9C8CFD
-:10E9500074FFAA99EE79D6264F5066C7F4674A9994
-:10E96000E8417898443513E979F8965DD74B939050
-:10E970004ED44D789F7F8CF75FAE9740BEEC4856E3
-:10E9800033F1BC6C82F7619E4F533709507E997703
-:10E990000BCF7BD54C11F253BDAD3C9FAF6EC2FC8B
-:10E9A000F5DEED3C3F9AEBA31F789F24795E6BF672
-:10E9B00097A37FFA19987F613EBE93CAD3720D2E3A
-:10E9C0007AF973F8DD8CEFAAF234BEFC05ADDDBE3A
-:10E9D0003ECA7FA995EFEFA3FF97B476D13EDA1F29
-:10E9E000D4DAB5F7D1FE90D6EE701FE5AF6AE5AF89
-:10E9F000F5D1FFBF6BED3AFA68FFBAD6EE8D3EDA7D
-:10EA00001FD1DA1DEDA3FC2DADFC585CFFEF68F5BE
-:10EA10003BB5EFBEE486B7D05EF381BC427952903D
-:10EA2000DC40FEAEAD55C544FFB5E3B9FED7E9DD28
-:10EA3000A7DD0BE8F0F2B8D20E2FB76F966B745EBD
-:10EA4000724FDEFAC94887BFE3F714417F1CC57BCC
-:10EA5000B8EA3D22F9F796BFC2DF95597E8F44E7A9
-:10EA60001B3A3DEAEDF5F987B579D669E9422F7F82
-:10EA70002F2347F5F8A7C7E847B36CCCDB809F305E
-:10EA8000FEBFCECDF54CC13DA50D786E520B7A067A
-:10EA9000D757EFB444D1FF552F4B545EE72E0DE10D
-:10EAA00079BF2A4BA487EADDA9517CAFB9AEAED8B5
-:10EAB000F0DE679D2CD1FB31926B8A6DB613E5C6F3
-:10EAC0007419E5671D93534BE85C0DF669A84FAACE
-:10EAD0004A65943B392E772ACAE55BB3F9BADA93D3
-:10EAE000BBEC788F42BA5FA4B70286CB12F17B5E93
-:10EAF0009D1856601EEDF272F2BF6E6FD6CE1419DD
-:10EB00003F4FD4E5FC8E9F4D253D560B7A4C213D61
-:10EB1000C60615A5F7DCDF948E8DB2A0DE92334DCC
-:10EB2000CC0C72F9803795C6DDFE20D75BF9A0B713
-:10EB3000F09DB56DC58CBFF3E6B1915FB742629EA3
-:10EB4000C1317ECC035E6EC733D3743FEEB3F3F1B5
-:10EB50003DC418F80E0B19F556CE007A2BBB0AE40B
-:10EB6000654C7DAB4736E49FF26AEFADFA991FED35
-:10EB70009BA9CF6E267D7216F50943FDF2EF49A3DE
-:10EB800050BF801EB1B2DE725097C7BADDA2CBE98A
-:10EB90005A4D6FD4C6E98D81E5EEDF5F1941F42946
-:10EBA0001ADEA1E94BFE2EC73801A04B735020BDE1
-:10EBB000C2A420DDEF1F086E6673998CF6F840F052
-:10EBC00033A77DEA42396D0E4AFEF712DC931A082C
-:10EBD000BE7A3D8B6DE816D46B9F1E5B51807EAF75
-:10EBE00055E68E593B916E854174BF43D1FC0E5B57
-:10EBF000ABF7B113F9F8FB3D7FD95C87BF8FC50236
-:10EC000032F94B324A156C67877DFA60B2E3F87EC1
-:10EC100093C9C1D042B4E75FB428782E70F819EDDB
-:10EC2000FD06AF93E079E7EEBBA89D59A8F4F0F399
-:10EC30007E46F05E9D994A76B9B2C3A6D98D1FAFC4
-:10EC40000FE441BF62A780FAE7F7D95BD7DB501F1B
-:10EC500069FB0198D9F770FF13095BB4FA78D19D6D
-:10EC6000B1DDF8E334DCFF1C903CB176A8E97B53BE
-:10EC7000B2F03C541E25417FEEAD96F5662F968B83
-:10EC80007AFB005E1E42F1A5E725C0C3D3ED5AB959
-:10EC9000EA5E3F05E6B3DBA28F0F06F5441C4FD4B6
-:10ECA000E829793DF6BFAB546F7F7A3DFE3E17CC25
-:10ECB000E75A13ECC1727D9EF5CE8C9EF97AB37D36
-:10ECC000EB6BA0BFD34A670A6EE396B4BE978E7A09
-:10ECD0007B7539BF3F8C0C80FE11FD1EF105BCED2C
-:10ECE000B9414557ECDF0EFD674A21142D33751EDF
-:10ECF0007200DC96ECABB499457CBFAB4CC5F7BB5E
-:10ED0000F4764BF6CC223B67D9FE224A13B43B8CF7
-:10ED1000F767FE817636CBD718EF74F4F5A53B156F
-:10ED2000BC3753D9E034517DC6FD5F89D7A7B73FC3
-:10ED3000BDF3F51FE0786794CEF46BA0F6EA28C027
-:10ED400025413BBDBE7EBFBAD81328F2C1F74F3173
-:10ED5000600CE59654E9C7FA115B88EEB1D9CDA1F4
-:10ED600032D42700FA30C629E869B12F8F9FA3C497
-:10ED70007D8FE7AF888D0D9E8EF2F22E89CEDD233A
-:10ED800036D53106F2CDB04FA98129AD2C3A3216D5
-:10ED9000E3059AF73A49AED7DED5EE2944BEF25BD9
-:10EDA00018DABDCD977664E03BF875775BCA1F43F0
-:10EDB000FA8D2EF7DC1E638779B3791CB7D7152A35
-:10EDC000477EB4033FA23E6E34076DF86E8A9A21E7
-:10EDD000525CB51DCA5FA372AF56EE9F7615EDCBA0
-:10EDE0004419E7559F37675A29EA354F2AFF1DC254
-:10EDF000FC29E5F3A03C2C5B6424AF45D9153723EF
-:10EE00009C9E96FC95C87F4F3B9D32C66381AC2487
-:10EE10007D20E5BB293ECBAADD77F216713D7F410F
-:10EE2000FFF9B81EABF3F138FCE6E48E1B4AA05D97
-:10EE3000D2BDA2AC42FF8D773F5486F1895BEE3E96
-:10EE4000F2078C6F6D4A97E89D815D35D100D6EB56
-:10EE50001658471BFE2E52D58C0EDC8FAE658A826B
-:10EE6000F6FA2E614608F573779AC4DAA07E529EB0
-:10EE7000315ED559688C97CA5A6CCC376607EFF665
-:10EE8000513C5071098E9326280A3E1D5CDCC12836
-:10EE90003E3F3D2F4FC6B8EE94E2B838D8C9C67E83
-:10EEA00052A718CBDDD3E3E2B66E32967B6E31E625
-:10EEB00033E718F3EFEBF4E8E1E70FFAEF3D6CB955
-:10EEC000FB71867ABAF18B4114CF8A7044BB3D69DD
-:10EED000B8E4C77311AFA56326C6C1B19149642FC9
-:10EEE0001DF4253105F2D6A58CE4A935357200F75D
-:10EEF000AB56512E534943450EBCEDC6DFEB32D124
-:10EF0000B96C3CFCBC5EEE1F7456F2DF858B485139
-:10EF1000B223ECF70C926BFCB8758CF3C32E8EC940
-:10EF2000F378EF2D3EED1CC5A3C7A9115E6165887E
-:10EF3000B7498C7E3FD27BF77B6A14E6B156C9ABEA
-:10EF4000443B63B5D849E3A815CE20EEBBD330CE01
-:10EF5000DB84F1DE2AA5F1F8D8A9D197C2E68410A6
-:10EF60008F9E5922C58FD41F4AAAC3C3977AEDBD7D
-:10EF7000063D8E4DA7CBBD3E6E7FEE6E17C500FAE7
-:10EF8000C16FC96B437CEBF996A0BB95E2FA8B2A63
-:10EF90003B912ED975DC0E053D40F7B2F538313D79
-:10EFA000AEB0339BD3F707D9A2210E9CE28862E270
-:10EFB000C0E9E8CE8447172119CF7BBC456532CA2A
-:10EFC000999FEBF72F18EF179F2FA47383E962E047
-:10EFD00022CD9F8E76DD606DBCC16E2940EFBBC334
-:10EFE0009C44A8FF20E3F507E7ED5981F7AE7623AF
-:10EFF000E120FFDCCEE11C4FB719EDA1B2D1082F03
-:10F0000001F461566F3A167C2D741E587F2F4BB554
-:10F0100016F5A6EBF1266EFF742F5028CE72203A1B
-:10F020003FE173713F76DA2619EDDBCCBC076BE864
-:10F030001ECCBD4C467D97D9DE7103FABDE2F921A5
-:10F04000EC4819CBE3E4BE991FDE64E2FCC18648BC
-:10F0500084B7F8F8D2F878526FB64B3B87023D90F0
-:10F060008CF701E42B304EB0FB1E46EF0494BED863
-:10F070007CF3BF417F9FE55B6494D7D96F049F7099
-:10F08000C0BC3EFB45301BE5F456A9D3EE8AF17BAC
-:10F090004A22BF7FD64B5E6BF4A1A0DEF0FCE3A951
-:10F0A00017E91B882B92973E4A467FD5B675BFB7A6
-:10F0B000A5FD1FDA2DAA3984768BAF5DCF67901D31
-:10F0C00096FD06CF8FDD9AB15E95106E8BC95F7489
-:10F0D000D03B97FC45D25BDC5F34DA1408639EFDBD
-:10F0E000C54E71773BF6DE321FE3D5EAD3AFA1DF21
-:10F0F0003D1993CDF79D85D93A7F1BD72F590241F2
-:10F10000E49BF8EFC3B3F5F3C4B20F6701FE463FCB
-:10F110006AA1B8BB02B1A22107F9A1D144F8AC3071
-:10F12000294BD7C4ECD3EAD34B2667A7D1BE8005C1
-:10F1300061C3A09C17581098CDE73E5E82F49A0DEB
-:10F140006C86F2255BE506647655120BC6D0A97273
-:10F150005EA2FAF5E981C9D99ADCC3731FB3C6D29E
-:10F160004FA796B159A897E11BEA5DF3CE247EDE46
-:10F17000E336DE8F349978BCC8D5DABACD78AE33B1
-:10F1800016DF7B13A3D631BDEB5FAFC149B239A304
-:10F19000A641E8277BED28DDBB8C3B07C6FD2DC5CE
-:10F1A000E52C66E40745B850FE4E99BFDB5DC5E32C
-:10F1B000016AEF63029E05D46AF754D45BF9EF0E3F
-:10F1C000B34040C1F755688BA9E0FFA2C4BF1E1B26
-:10F1D0004BC5FA19AC83E218593B5378BC84F1DC77
-:10F1E000696B1FEF40E97E00A9CA44FB94512FDBF5
-:10F1F000F9EF4355317A279CDE6CC2FDEF7D2C2C54
-:10F20000093D7EB80EAF42EDF4F3D85D5FBE43BF5B
-:10F21000C75C20B6055F23BB21596E43FD9864E4AB
-:10F2200043FDFEDAFD1A1FE2EF490763CE8F7CEA49
-:10F23000718AB7CF66DD35B8CFCAAE4A35E0F982FC
-:10F240005FF6FC50161C17DB6F98F3759E44EF7445
-:10F2500029E77D54BEB55A19A0FFDC3EFACF207ACB
-:10F26000EABBFF2C2ADF16FDD4753D80626BF77B6D
-:10F27000AE32A5C76E8D87B3EF3EA3FCFECEBEF8BF
-:10F2800078720E17BB39E0BE01E066BF5FF4B7329B
-:10F29000FCDD1B63BD6939E75CFCBC5CAF1F75DF3F
-:10F2A00088F561DFDBAAE0EFE818EB9795BCEFE2A9
-:10F2B000E7EE7A7D3EBFCBCF1BEBC5E3277EBE30AA
-:10F2C000AFB4EFC7CCEB0A9BD5505E3EABD7BCD2F8
-:10F2D0007E1833AFAB3CC6FAC19AC4F3BAB6C0DAF3
-:10F2E000EFBCF47ADF9BF8F5EAC5AFE3C669D63E1A
-:10F2F000E0CEEBFFB0FCEBF5FBA3F9FDD7BBAD2AED
-:10F300007E1C95E409C8CD0E944F154C5985EF84A9
-:10F31000336752C2B8E0C91A7F9C423F059E930EE4
-:10F320000DBC89F2F1A497C7FD1E7E666108CF610E
-:10F3300096EFB52878DEE1D5FCD620781621FFEED1
-:10F34000B6C92E8C07147D8A763FAA2307E3F97687
-:10F35000EF387233C93D66B46760BF5682FA1A440B
-:10F3600018DDCB780DDBA5C5C65104C8FEAB17FD73
-:10F370007FA47DD50FF8BE4A8FDF8FB5B3D8841E2A
-:10F380003B4B8FDFDEA08D733E9BFB03C1CE570549
-:10F39000B2F3258A6FFEB9AD6303DE3FFAB9DBED48
-:10F3A000C2FDCC416DDEBADDA8DF6B18322BAFC8D1
-:10F3B00094005E17F44852CF7D098CA374E5E5D123
-:10F3C000BB1868E78D2DC47E395CFF07CA89A75634
-:10F3D00000800000000000001F8B080000000000FB
-:10F3E000000BDD7D0B7C14D5B9F8999DD957B2BBC4
-:10F3F000990D4B1E3CC26EDE8100130831A095258D
-:10F40000448C96D20D3E0ADAE292F094BC00ADF143
-:10F41000CAAD13121110356A44A0800B8A62AF681E
-:10F42000E8450D08DE1035B5B7D886B6B6D67AF9F8
-:10F43000AFC0452A086B1FEAFD17CBFFFBBE339315
-:10F44000EC4E7655AAB7F7FEFEF187B367CECC79BE
-:10F450007CE77B7FDF3973AF893156CA989A2F8555
-:10F460007609F05B666C4D19636EF8C9B2197B447E
-:10F47000EE734B50FF88479255A8EFC9F232368998
-:10F48000B1BDAF994C7E0F638F7D3777A7E81B28FE
-:10F490006F0A7A766079A489053B1DD888BC8CC137
-:10F4A000FDBD36D9BDBE048A529FAFDA09E5DDBF86
-:10F4B000B949703196398A517BB5CDD3D989898CB8
-:10F4C000BD6889BC7A11C7B35108ED82765EEA281F
-:10F4D0009921C1FB0B4F336687476BEFBCEE9193CD
-:10F4E00043189B7C529E86F76BB7BA1511EE37F422
-:10F4F00035CDC07E581353F214C6D2C569A213DAB3
-:10F5000049BFEFA8D20A437EB4C7DB158672648771
-:10F51000A0ECF462FDF292E5C5F0BCC3EF75C07CCF
-:10F52000E7E350E9BE7B8619DFBBCEA2B4413B675F
-:10F53000CD6C4E273C7711FFA60E5CE77FD75BCEE4
-:10F5400060FCF33BEF9C4FFDCA00B24C28DB641A11
-:10F5500087CD2BA7B640393D89D9EC13182B5B2DED
-:10F56000F7DE85FD2F75CA3B01C6AE72B9F7873845
-:10F57000AFA62C5954B0F310C1416F7FA13F606119
-:10F58000D0EF98DD16688CD1DF45F837B633B63C3E
-:10F59000BE2BB65CD21D5B9EF8466CF97998231B96
-:10F5A000CAD814DBF06D2701DE3D87AC0CC7BBEC7D
-:10F5B0004C52C80AF03E60660CE7AFEEB1123E4C0A
-:10F5C0005FE6F0237E9CF920698715CA87DF49A290
-:10F5D000E76FFD173B7FDED4F91C96D5E792193E05
-:10F5E000BF6C4867592A8CFBE5CFC45B02C57C5AC7
-:10F5F000666CFFB9A21DEBB17E6267990CF75F1CC8
-:10F60000CD581FD64BA17138CF17FF2652BB91673B
-:10F61000ACA19DD0EE99FD4F3F87F03AF3CCF0546A
-:10F6200001C67CB969E7C4F558DFE2F4EE84FB5308
-:10F63000CE3C9B138C5A9765BBAD31F35CE61568E5
-:10F640009ECD927FF513B83E47CC844F2B17866A28
-:10F65000BBE1FD954296A2623B16C0D3622C2BE91A
-:10F660006EC0D7292E8EB72BED508EB3EEFAB5664D
-:10F6700093C8821307CAC7D73D4DE3293CFD36E145
-:10F68000F501B36A4A4238AE13945D30FE0376D773
-:10F69000389682D7AC10E2CD3F794D343E98D70FE3
-:10F6A0001B102FDE14959D2C717F8519BFDF5A39F1
-:10F6B000F173EAA15FDF38C6CEFF21E9163F8CA3C4
-:10F6C0006053ECBA178562CBAB113E806F352CEAE4
-:10F6D000BE0FC793BD2683E884D1780A4FBF7B93C2
-:10F6E0000FC63BCCCA9A102EC67EEFC379403B3F73
-:10F6F000FA11B45348CD881745DE9E370DD641A385
-:10F70000AB97054E47F077DB70A0B76502E72FFA9D
-:10F71000FD658671E8ED976A70F2589407C3B4FEF0
-:10F720005619D7FF83BBAB1E39691E3C9E5377FB2E
-:10F73000FD9551F7176D5ADE9B09EFD5ED1D3A4146
-:10F740008C826FDD33AFA6DD0CF7CFEE96146481AB
-:10F7500075739F7A600A3EF78CD889E3C57A3FCCEF
-:10F76000F76CE7EB2E7C6ED156F704D13BF0FEE24E
-:10F770004D57F92B0B07E079A974FA5239E773CB8F
-:10F780003ACD211BD245E75B3386239E6E12943C13
-:10F79000E8A74C0A8A4877CE52BF599DCCD8D40BE3
-:10F7A000FFD63B0CEA1B0F4D2A5B0FF5EB4D81EBAF
-:10F7B000BE8574B75D5476C16B2FFC7A455A306AAA
-:10F7C0007D7A34FC5F7F631DB5A3026EE40153EFC5
-:10F7D00029AC998EE529C54CB0023F769D66FE9016
-:10F7E00003FB636F9B52193B7DF09E719289F8D1A8
-:10F7F000CD482767984B41BA3BE06CFA15F5B7C77F
-:10F800004CFD4DED4E1190FF1E785250D63384477B
-:10F810002CFD9D3EBDDA358DD3F52D01920326E6F4
-:10F8200081F6963C3196F8807EDFB87E4B43063AEF
-:10F8300036E0C5096D5E889AD1F8657C6EC84CD5F6
-:10F8400082F458D70CF2228A6EEA4EB65B98637047
-:10F850003F8CF5E32F43FC05BC645E9AAF9DF80630
-:10F86000FC0936C0DB0FF0570E2F33E8FF5681A698
-:10F87000C6968DEECC473E274872455BE6007F6515
-:10F88000E521E2F367E1E77A05F942E731A47794ED
-:10F89000A5BB50BEC8DDE7B660BD3ACA8FFC68188C
-:10F8A00022295CD9F3C9C47FCF7AC34FD1FBCF8E55
-:10F8B0005554B87D1EE9C541EFB952A3F8534BE743
-:10F8C000ABAE3094CFEC1D5221BA106F7FE6C279F7
-:10F8D0007ED039A4C2E24ACC378C7C134646F07DF8
-:10F8E0000F7F02DE25F9FC661FC2BB0D842ECAB352
-:10F8F000214D254D71D64D7FCF63692AF122FFF846
-:10F900009E43413E9E6AAB7D1CE535FEF9E1FE1F3C
-:10F91000DF18B213D7FF614DAECE17783F7A3B4365
-:10F920007D9C9FBC71383F250CFDFC917953505E46
-:10F93000ECC90964F8E07E46459F5F0478645CCBBF
-:10F94000945678F584A87C5F86F558C0405EE2B591
-:10F95000346841BEC2DA86D278195366203C17CF8C
-:10F9600004F897F032CAB7A5018BB21EE470ADC49B
-:10F97000E15DBB5B08B5C258166C8885C7A20EEB6B
-:10F98000005EE0FFB646D5433F4BA5D01A945B23FB
-:10F9900040F318520EF8F064ECF3CB58378DABEE11
-:10F9A000D98BD67870FE8B06E73D39FE09383F616A
-:10F9B000B68DC6B3728F40F2D563E9247D22B21CA6
-:10F9C000F8318C97FD9AAFC34D9ABED478E77CFF8F
-:10F9D00002B89E6FAEF52F802A2235E4231D2984BC
-:10F9E0003FCB2A3B7B89AF30F9C73767607BCC2F91
-:10F9F0006379A393EB7BECC95791AFFC85C99D88D4
-:10FA000087539608F4FE945F8B3B01C3D94DFDEB01
-:10FA1000172038D679998C707CC71CA079AB4B998C
-:10FA2000BC0BF84A9D2DA0EB5FF2D5309F45AC8909
-:10FA3000E65DEDCBA6792E61ED54AE67610B1371D7
-:10FA40007DCB52105FFFC4145A5FD093983D753040
-:10FA50005E21FCFD51705BB235B6CC9E8C2A6723CB
-:10FA60009CA11C05FF867D17ADFE38707FB45F1E1C
-:10FA7000858AAAC746E3710BE1DF316D5D1EBD616A
-:10FA80005126F2910751211EA635508EFC177E4D4E
-:10FA9000A172B70DDA4F9AD85FA6FAB2D5BCDCB026
-:10FAA000E3C5C0A62B00DCE660A60C8B532B067AC0
-:10FAB0004D00D739B9C1154857B5267F9644FCC4C7
-:10FAC0009F1F8071B066BEBE8F4D682A6A8AA37F71
-:10FAD000E8E3DF2874769B908FECE7FA85B3346215
-:10FAE0008EE6FF1B7C5CBEA7F48469FD232F080C07
-:10FAF000F5DECDC24399B88E9B33BD422BCCA974A1
-:10FB00005FCB34E237C08BF2605DEBF7BDD73B1CB7
-:10FB1000CAA5557DB84C30EFC0F2D7919E2725710C
-:10FB2000BD39B9698709DA4BBFA570422BE0E743BD
-:10FB30003E2FF59334B1FD30B61359EE9577423B25
-:10FB400019AB55DF8A62ECBFA985F0B79AD1FDA148
-:10FB5000DF59D582CFDD378CA58AF81C6B11F0B93F
-:10FB60003543055A8F35F3D99C1FC3556232E99D41
-:10FB700023E6C842CB642C374D23FCF2CAEE9F65C6
-:10FB80006299B5A5805EFDA88B919E39D424DE5282
-:10FB90000DD74727F072EA2AC1BF9388E121825727
-:10FBA000BA955509A9FC7EA89848D8BF97EA43346E
-:10FBB000FEF4E94D25388EF41C7EF55882A65CE8EB
-:10FBC000FFC851736835CCF388862FB7EDA8488FEE
-:10FBD000E6BB47CEDA2413E8754732747DB6DB8185
-:10FBE000FAEC6D25D3D39118B373AB52705D3D59C8
-:10FBF000B1F5E7CDFE9489483F474586EBF7678727
-:10FC00003F05F5CFCB2D7CFCC6753FACAD67E3A7B8
-:10FC1000020B45C9B3C6391F939DD0F8A91473FFD1
-:10FC2000ECDD368622AE5FEE2DE99981CFD5B3BEED
-:10FC3000358887F59DC92C1445179727C5EF57A719
-:10FC400087C64F45A6C6EDD7127BFFD3214C1D12A8
-:10FC5000EFB9B4D8FB308F9872D727FDF3C0FBAC57
-:10FC60003CEC0A809D3813E52894CF874CAA793C58
-:10FC7000AAF15CFE9D93C32ED4CF415E36E1BA9CBF
-:10FC8000F386491E9E67AC0AEB2F37996EA9C6F51D
-:10FC90009522AED9CE817EF47A7C3F7A1DCFCDB14C
-:10FCA000B06E5A9F088D03E1A71630B6E5E04716FF
-:10FCB0002FEA11070F13FC747C8986A31AC56FD233
-:10FCC0005AFBBA4D4057177C9FB51783C13AB447CA
-:10FCD000E70B17DBFD2024D244530C9F482EEDE7A1
-:10FCE0001BC4A61E35893A9F79A872444C999E1F61
-:10FCF000785FA8AE04BE525ACCDFB7649B8EAE4686
-:10FD000059C6DA697C308F2C845F7FD966283BA086
-:10FD10003C36AA2C1BEA3D86FA0C4379047FFEACE4
-:10FD2000B33B0BED5777B6A55A023A3D9BD93D4FF1
-:10FD300080F286565B752594EB4BB9BC6E3828284B
-:10FD4000246E34F835285CEF7428614B6D31C2A104
-:10FD5000AF17F94A5D97200B400F8ECEBDDD54C61C
-:10FD6000F7BC51EF750AF45E5DE77BF45EC2F60BFB
-:10FD70004D44E7EB0B8FF3E73ADF27BDE0DEB6E556
-:10FD800001646CBD662FF105B0E2FCC3E1C586AE2F
-:10FD90006A16740CF0D77399FE5789BF1E1264A4BB
-:10FDA000CF7E3CC5761D0374A13FFFFBB107DF4248
-:10FDB000B523F9B68F5A2478FE3FEADF9F847AE1B3
-:10FDC000EF3539B251081561BF5B58B008E5E0F76F
-:10FDD000EAF30E9BE0B963E6F036E4BDD5D959D518
-:10FDE00012F0B563CEF04801E4FC75D945BC3C3453
-:10FDF000BC0DE1F92FD9A309BEC74686479AA0FCDE
-:10FE00009D9D37F0725E781B96D59D7EFEFCD8F0E6
-:10FE10004811DECF51A755574279971C9FAEAFCE00
-:10FE2000E67AB43EBEDF4FF45764A39E57C7E5CFD2
-:10FE3000BC5BDF998BFC769E89C90CF8F4AEB327C6
-:10FE4000F6EC0278EC6A4E663B393A0624D087D34A
-:10FE500039EA839C6827BE1EF1019F27E7515F584E
-:10FE60008072F2249B77BD6F605DF4FED34737ED5F
-:10FE7000C5F6D3E715931C117DFE67B17FFDFA76B9
-:10FE8000115CE1F967B365CEBF45939F9EBFCB1967
-:10FE9000C2E71FB4F37901FDD03A3BB475F95E3681
-:10FEA000E793DFCBE67AA4E2BB8ADABB49D7C7D7B0
-:10FEB000760E1D0DE3EA105827DA35EF98996A2778
-:10FEC0003D2689F4A10E1C3BD63F941952A19F9B5D
-:10FED000051640FEA2F3930EB73F3335CAAEE928AC
-:10FEE00081B263C08EEDA8F6672679F09A66421D4E
-:10FEF0005FE74F1D3EFE9E2E9FD25B793FE90F16B6
-:10FF0000EDC4F9244B8CE4DDC239F93B5B483F98E2
-:10FF10004DF3677E7FA600ED9D5C9A6D4238EAEB5B
-:10FF20007561A2BF99E62572BB5C5F371DBECF66C7
-:10FF300073BBB95604FD02F04EC90D527BA06F8C05
-:10FF400023C1AEE91BCF22D246C19949E14978FFCE
-:10FF5000FF43786DC7FAAF0AAFFA66E023A62FC158
-:10FF60004734386E14BACDE99C8F90DD8CF7511E62
-:10FF7000DDE10BFE383B8A1EE6DD554F7AA63EAE2C
-:10FF8000E43B5EAAFA0E433AFC80E86EDE3F25931E
-:10FF90009D6BD40375FB4AD7571F4EE0AFECD6E6F6
-:10FFA000A7E87E596D1CC9C5E13DF703BC529953C2
-:10FFB000463E7ACC121EABC0FBC74CC1275EC27155
-:10FFC0000F1365E02183DA6BCE11A93DBB8E272C80
-:10FFD000E21AED19C093758027367CBFDA42F673BA
-:10FFE000873BB47911E2C90D2314D54B7298E859B7
-:10FFF0006D4EA6FACB4DC719FA9923936519F54CA6
-:020000023000CC
-:10000000C02BAAEF989B1F52B9BF40B593FF34296C
-:10001000B413F1AE040080EDCD1D4DF568AF939F94
-:1000200063AE8DF73718AFB85D5DC078BD4FC3DBE9
-:10003000A5D984B769AD8CFB2924FFB8EA287D6176
-:100040004C0EE723C9A5E1177E8BFAE706BB92C7E2
-:10005000B80988FE0FD69E4EED01BE7C48F8C73821
-:100060005E2E78C0B983F33DA50CE17CAFB39DDD76
-:1000700049FE2B338D7FABBD9BF47093CDEB463F98
-:10008000F13C916DCCC7F65ACD32E28911DE2939A7
-:100090009CAF0DF667866F8FF667CEB3AAD62CACF1
-:1000A000BFDB4E7681EED79C97C2E94AF76B227D83
-:1000B000C6930BBA5FF3160DAF06D5AFFFAFBC1AF0
-:1000C00068EFFF6878A6F47C9A37DFC1E78DFE9170
-:1000D0001AFC05FDD6ACB2BF877ED01AD5DC6D7593
-:1000E000211FB9CA1F8EB2D3D8263E8FE09BE610DF
-:1000F000C2A959621B9FC2F551F9FC572E0C2D8DD8
-:100100009ED7160B9F97FA4FCE98796D71B1255FE8
-:10011000CFBCFE3029765EA72769F362B634784FEC
-:100120009373B7343BDF13C6C115E70557B60AE62C
-:10013000553830AFABD1961B4AEBD9148F0EAF4E6A
-:10014000B88EFF4BE6DBFE983FDE7C8DF3DC93E35D
-:10015000AFCA994474D32D970EE0757033CCAB14AD
-:10016000D77568A885D695E327632E05F9D8CA8583
-:10017000302FBCB6A4933F6B9ED5DB857E5DF6C366
-:10018000146D9E8CF8C0CACD23892E016F39DD3ED7
-:10019000C6E3412BEDDCCFB072B9ACA832CEFFC7BD
-:1001A00064074780BF925ED21CCBD7BF180EF6AC57
-:1001B0009AE26838D8B2E617C75977D54AF89C68EA
-:1001C000DDFF8F18B95DC849EC6763AB62FD14E8C9
-:1001D0006FEC2F8B83CB46BF07637FB3C63EAF2642
-:1001E000886F84BF178D47C7CC1A1EDD6927F9A316
-:1001F000E3D131279FAF118F1868D148C7FABC8D62
-:10020000709C87708C1387007CCA43381ED3EC33F4
-:10021000C0A73C84A34E07B734737E6084DB338968
-:10022000F9DA579B87018FBFEA3CF4FA44F3D0F523
-:10023000DB4DC2F2CD889F9B3299DC4A7A70782CD4
-:10024000DA491E4BA808C7B5C502F40BEDD668FD08
-:10025000932703E6F7A723DC2F7A5CEBD738AEAE03
-:100260001CDD2F1AEB376B7445B6A31ED298C4E57C
-:10027000E1B9434EA21B961B9E87FAF7F9035686F7
-:10028000FCB54108E7E373E704FF7C7AAE25D98B20
-:100290007251F7379E7891FB1B5506F62FFAF982BB
-:1002A000DC5FDAA8FE6C0DAEC3C51CA909EDCFC694
-:1002B000AE58FF1ACCCF85F33D67627DF87C83187A
-:1002C0005A8A26EB460BD707369A5827AEDF805D51
-:1002D0007E3C9FEC844C99A13FA8C1F45EFE8A2825
-:1002E0003BBE41AB6FC8E2FE298C47939F1DBBF21A
-:1002F0000D864BC386339F613CAD619F915E62E981
-:10030000A96EA02C5C14B0BDA87ADF003D913D8E93
-:100310007858C9427902FAD57839B9AA2F8471ED93
-:1003200046CDEF3AB4273C03F505676927433EDA2B
-:10033000789ADB21530EEE7815FD6DEEAABE91A8DA
-:1003400092346AF107A3FD33F9E04322FA8774FB84
-:1003500025CA1F55343BC61FB99ADE43FF16F61750
-:10036000C65BE8D796B89EBB51D373411F26BEB972
-:10037000B0BD80F461D45751EFD0FD63A887A03E93
-:100380003A27B7C2920BF3FC6B6E85903B89F74717
-:10039000763F3A5D267F0EFFD2E0A33F877EB2CF45
-:1003A0008F03707D6A8AC1FFBFE2A74309CF0F2484
-:1003B000D05387E6F6FBFFD3D1FFBF42F0A6239EC2
-:1003C0009F1283E4E75FCC54F21F2F45BF3AF1C17F
-:1003D0006EF24BDFDAC494F514470FAEC172FD1212
-:1003E00026AF47BF746590EAD12FFDCDC93C4EE5DD
-:1003F0008DC25F8C034597D96E28C7F0E93EF27332
-:1004000037400B5B14F423C43EDFC842D325C48BB2
-:10041000AE8BD698763A389C6ED1F065B39DFBB71B
-:10042000A7ACDA21B2283F43CA04BFEF1EA4879FBE
-:100430009AC9BFFA9FDAFAEAF0D89353918CEB95F8
-:10044000847E1F7CEE1E2BC9D99326B604F1E541AC
-:1004500037BB6536FAB3EE66FE5C33E2859C15ED7C
-:10046000EFD2AFEB0FD897209E4DCBE576807E3F45
-:100470009263A632F9AB493F4DA6F83BB0A571880F
-:100480008765D9BA5ECCC6A19FFC3D8D3F35DCE8BF
-:1004900008627B6113E767B372B93F6156AE85D6D8
-:1004A0004F2FF7FB8B343C837EA8BDA4892C26FEFE
-:1004B0007743FFF30F697628A3F96E5C9AC4F5E8D9
-:1004C0007E7C37113F4B2E0E5882C44F2A889F45A1
-:1004D000FEE0F0225CAACED42DC579FC714E12C389
-:1004E0007C85055A7CA929D74DEDEAF1A438FAD7C5
-:1004F000CDDD9E0179A3E3A72E670E38F9BC2F3519
-:100500002FC078AD5A5F44FC5B1FC714835E92888E
-:100510002E9AB57533C6C500AEC9C8670F98B8DD49
-:100520007500108BFC569D5ADC12EC64940307F6A0
-:1005300015909E3D5FF3A7829C24FB2A02F282AFB6
-:100540007770F3427CAE338FE2B9EF9943CF3C85AD
-:10055000F2F610B723F4F53870607808E977CA9995
-:100560000B5908FF03A77F341CE3E407B4B8649D6C
-:10057000A53B9FEC7D0BD753EB5CDDF908BF9735AE
-:10058000BCA94B8232DC1F3934F830F21F3DAF007A
-:10059000DF73D37CBC2EF4379CD0ECC8E36057E209
-:1005A000B8805AFA305E0AEB9D89E5C8BA74AEEF9E
-:1005B000C1B8102F4E1C1A4BF3DB68E678ACEE176F
-:1005C000C83F71DC1C39D50CCF1FCF9CC85A64942E
-:1005D000779F3ED58BED6F179955C6BC8D4F3EEE7C
-:1005E00082E7CF839D8B7EB35A53604626F28B17EA
-:1005F000B9BD6E5C07947FD171BC732C92457EBDF2
-:1006000025D99D883FE70E16513E12F3C84C8572DE
-:10061000E37E6EDF18E3CB27CDB1F86F6C17E7856B
-:10062000FEB546FC8DF23DFAFD38ED7D51F99C3961
-:100630009C7F27C063AA37D8931B65A736BE924913
-:10064000FCF8C4FD9FD07AB2761E373D69F6CFC361
-:10065000F1B92BBB2D3551F8F83B8D3FD75AB9BCBA
-:1006600006FE6B89E6377A7D59058B1BDF7F5BA31E
-:1006700073671F977B83EB399EDFCE9E10915FFCE3
-:100680002ED74BED8DD2F2146E677F3A6C45FDA4E8
-:10069000B384F22046ADEA263E00E325FC3CB9399E
-:1006A00085F823DBC0F175D10FADC43F1681FCE0A6
-:1006B000F636CFCB621B78FEC5A97B7C84CF65ABB9
-:1006C000BBCB881EDC4C41BDE4A5B6F75411EAE76C
-:1006D000EF164A30EF6C7E9B8FEC945BF7F9687DE8
-:1006E000A7687CBDD6EAA73C33F6388FC32D78784F
-:1006F00029F5539FCCDC22E97F210BCAE525BB05F8
-:10070000867435A593F3FF3AA9FB30EA91C6BC097C
-:10071000168A8D2FA33C62517A26CA1F66B00B62DF
-:10072000D75DBD24F96B9437E6BCF8F217EC3D4B6E
-:100730001E5F572E27F60A9C6F68F2B71EE52FEA58
-:100740006A9ADCD3E5E6624D6E9E12B9DC5E647D8A
-:1007500088AEC3F37C34CE5B311E4CF1CF8805F5F7
-:10076000934478315C1B978E1723304966E8005E0E
-:10077000D49DEEEEB5929DA9BC8871EEBA55ACDB66
-:100780000976DA22A989E4C33099C9948F373D48A4
-:10079000E34A5F09FA39ACF3228CDD4EB874BD60D0
-:1007A000901E6090FFFAB8753C31EA7F535685443D
-:1007B0008A33E533BAAF5F65D65982E3ADB671FDD2
-:1007C000BBDAE6E816D1DEAC349F8DB637AA257FBA
-:1007D000791EC9CB11EE53638845306C57F1F9ABE4
-:1007E000464F1AD02B934B236BEE87F6CC6C9C09AB
-:1007F000F9A4DEBFE89BB6B818E37A521FD92B2CB8
-:1008000083C9BBA0BFEB8B395C93611D76005CCDC7
-:10081000924AF033DB64778B1BD7BF8FE23291A112
-:100820008CFC74FA7A6D733215F31CAF2FE6F47DED
-:100830007D31F727C3FB14FF3517C2FBD07EC501FE
-:100840003BD1E5C7FB9D2194CF207746B9A13EED72
-:10085000F760A740F9DC0127E929E73479E1D1FD08
-:10086000B56C0DB5779386372AAB188EF60813AEA4
-:100870001D0E6367BA9E5CEF4E14C7D4EA7D7D37C8
-:1008800072FCB592BEF0B13BFC7D2CC37828276783
-:10089000B686578DFBA697DC85FC3BE05038D483A9
-:1008A00025A8FF58C5DB6EB401B06788AB2277225C
-:1008B000DE8F74C85678A572D4BBBF990BE53FECA8
-:1008C00033332BE2CFAEEB52BAF135C99F11183B4F
-:1008D000783C4B43E6E3E1283A5EB63BB65CDF1971
-:1008E0005B6E64D2F17014FF6F7E77E92F5E8BC26E
-:1008F000B7BBF29C9E53C90C7D6FCA45A0A79377E6
-:1009000077B113280BC5EFA6207F5C00E41F4FAF23
-:10091000F8E4EE25BF780D9E932C15AD1C9FBC16F8
-:10092000A4AF1AD01BE2D9A125797C7DADD6A6D380
-:100930003B003ED697AD4A0BBC352B2FB801DF6F7D
-:1009400030457A715DADA3CE8E437F76C5A80B94FA
-:100950004FF0F13F3305E1F4B17D1AE1D3C79BEDD0
-:100960005EB4533BB21CDC0FFB8A1012B8DD326B55
-:10097000521AE68BD05C808F45D66C463E3DD92A14
-:10098000AF9669BA3613AD37586F70EDB0A86BD01B
-:10099000AFDA0106648B82765E9F0B89E197B88E91
-:1009A00088DFE2B3161BFCF4B5F98B5AE0B9658118
-:1009B0002486797CD2675200F1EC5E6C2ACAEED9AB
-:1009C0009DC7E54FBD2D6C9906CF355EB8AD6AA8C1
-:1009D00069C0CF6F3507FDC361DCE6AE92EEE17012
-:1009E0006B71F374B2EF80DF72BE7888F3C5C577A0
-:1009F0004EA3FBC2EC2A9AEF29982FC2E5D5CD561B
-:100A00009AEFA9910EB2B74F6D13A8BC58B6501EFD
-:100A100020E82743A679F0BE59B6B2C1F068DC746D
-:100A2000EF9ACD50FFF34C910980FFEF6FFD09C5A0
-:100A300023DE67BC7F759F487ACFFB72A4AC1BE1B5
-:100A4000E96D7245DB938BB78901E4978BB7DDFEC7
-:100A5000F3C908B7D93795223CA6BA6F4BF33A06CB
-:100A6000EA757D4F4A2D7F0AE972EA67D3FBA6A299
-:100A7000DEB50DE806C62D995810ED8FD7B65D4D41
-:100A8000FAF6E2EA2437CECFBB75D70C946FEF5756
-:100A90000F33D1BCF6084C4678B89BD3F0FE6241C8
-:100AA0000AC4C3AB45793C9E306D9443417FC3E299
-:100AB000B744C217A0B31B318E50BFCD4CFAFC6BAC
-:100AC000B3DFF9CD5CCF009D09B337CD9A82CF3F1C
-:100AD0006DA6E7FBF5A9AD1FBE8B7E01FC03C98E99
-:100AE0007288E067A43BEBA855F9382E23FD2D5EF4
-:100AF000DD94CFE3FB9746876C2BD021F0E3B34026
-:100B000027174D7F171DFEF952E8908D488D91DF14
-:100B100083F99E4ACFE9F1519BC2FCBB1C940FE3C1
-:100B200017805F8FCC97884E46E65BE839E9BF5661
-:100B3000EC7E13E0F4785ED0928F7A17F397A07C66
-:100B4000F646E40A74C53A34BD916DE5F9E1685F93
-:100B5000E0FA6F1CCA9E5A1FE59FC9CCD7ECC0BCF7
-:100B6000600AB673EE77177A71BD1AB2CE8E43BDA6
-:100B7000BAF1D33F535E85E320CFC7712811CA5322
-:100B8000327B02848F3ADF6F54B81C32CEAB2D9F7C
-:100B9000DBAD8D9E08B5B3BF80D3BB1E8FDCD29C6E
-:100BA0004471A12D9E909DFB5940DF83F667968A84
-:100BB000C4676CA5AD0CE5182B17299E33F5C22F21
-:100BC00018C6BF7E7EC57405F54A47E9ABD2109CB6
-:100BD00067B959AB7F7E6D36D4FFE28AABC83E5A07
-:100BE00091217A51AF9A599AA392FCF4F3BCDDA9F2
-:100BF0001752880E672D9D457AA53EDE00B3791DFC
-:100C00008027B38158A3F39B675D61F73AA2F0EBAD
-:100C10008FED4215D7ABBD29D78FE57EA1CE622ED1
-:100C2000CFA3E1B022C342FDFF3577DA6484EFD46D
-:100C30002BF93A7CB0C71A5A0DFD7E608F6F47566C
-:100C4000E5737F6BB6740DF1A5DBF658293E7F4640
-:100C500088FFFCAD6B45CA2B5ABA566021E8EF837A
-:100C6000675ECA42BEFE875D2F65D5448D27D1FBE6
-:100C70000BF313F977BB1744DBDB332D3C2EC02677
-:100C80005863FCBB335D5A7EFE978C777C2BA19F0B
-:100C9000FFA72370BC6FF6FBF9DF18111DEFE88F7B
-:100CA0005B29DCCF6F8C57E596FFBB365E9E0FDD70
-:100CB0002C69E355AC3C6EB190C7C5571E1A4278FB
-:100CC00037D3127980E259AF88B216D7F0DBE8FD4E
-:100CD0000C5E9F605ECCEFCFF59491BF89C6237404
-:100CE00009DD4ED757981FE3710CE3FC6A0E8A7139
-:100CF000E3727F2D9079BCB3384276D5F1379EC030
-:100D0000C87B3FBEDB0FFA4CD179F4FDFAAC86DF2D
-:100D1000D7217EC3FCEC6B7939115E27E25719F9B4
-:100D20009C8E75FC3EBE362705F1ED1E5B43B81761
-:100D3000E0E71753987D1894B5F8BFFA2ECF6315E6
-:100D4000A3EC1CA4836DEF3AC9CE6935373D8EFB09
-:100D50007ED41689ED82FB9EA486500B94BD662737
-:100D6000E54DDD91346B07DA7561507005287F928F
-:100D7000746C07EA09CC96C2CCD08F5AA1BD6FB172
-:100D8000C9ADA05F3C96EC22FED2BC8091FC4E67C0
-:100D9000DD82000039989FCDFDB4CB5E1428FF188A
-:100DA000281EF53E2527BE3EBA57A38B5F61020D74
-:100DB000C6E5A7C77FEE60BEEE179382E1283BEF42
-:100DC0005E41F112DF813FCC8F34B3BEB9C497418D
-:100DD0008FFF05C883E1E28FC93F7BE2EEE0E3F1DC
-:100DE000F649E8D705D3E3DBE9AF6BE32B6C174299
-:100DF0006617D1AF69470CFD6A713C679A0212060B
-:100E0000E3B73C4E97CBF47CF94DE8B71F56CEC7FD
-:100E1000E8F28719EA1719EDD7B0E010A4A729E97D
-:100E200028DF562E8CF5A765D4ACCD24BF5ECDF758
-:100E300067A1FCDE6476AC1552F01AEB8FDB64F030
-:100E4000C77D115FC84848379333D0BFB16920FED2
-:100E500047F8D33A5F0E8902CD8245C7B5D35ABD54
-:100E6000BD41D483A6D9949DCA60FA61E54A06CEF5
-:100E7000ABBC80C34FA7E7460D35858302D9A58358
-:100E8000F9A106CFFA11044F7BFB1D64372597703B
-:100E90003F76F2D29A20F29F64E03F68C7592C4D0A
-:100EA00002ADFF146EB7AD147879E5345956E17987
-:100EB0008B4BCB97BD96E767AFB40783D1F1B4CB2B
-:100EC0004D2BA645E7E5CA0CDE473E3C87F737D3F6
-:100ED000B68AE705074147CA1C80638506C7DCF26E
-:100EE000249EA77EBB8DFC5B5BEDED345E9397DBB0
-:100EF000D935EBEDC4EF868B851437E93173FC509F
-:100F00009D36A257A5E76DCA0F1B7E598657F4453B
-:100F1000E1CF6DBC5EC70B66C82BB058BCBDE8BF47
-:100F20008381289897B252F0F656D0BCE488AAE0A4
-:100F3000BC35BE3C2E89CB11303733385C795CCC64
-:100F4000B05E8037DCAF3ED6C1FD462CE825BDCB78
-:100F500030DFC178B3BF10F96D4F3FDE7415C6E3C3
-:100F6000B70FBABDBD3BA3F18579D7A05FF53E139E
-:100F70008BAC8F873F4AAC9D6FCC9333DAFB0DCDA2
-:100F8000D3039AFDA1DA683D2D647F34DC392DC08E
-:100F9000ED8FC216F43F35AE024905EF4C3F28D81D
-:100FA000B0BDC6392EB2BF1BBBF652FCBCA18A290C
-:100FB000388C1ACD3FACCFF3B899C7F14066756253
-:100FC000FCBEC31DDE8EFBF23A96EA793C3CAF458F
-:100FD000ED12B43C1E3DEF2B720CFD9F1D8297FC61
-:100FE000A0FDFBFB60FD79FECEA5E581398B033EBC
-:100FF000B4C42FCF7BE29749932E218F563DD381E6
-:1010000079B289F3685FBF01EB6DB8165A3DA20152
-:10101000E8CB7AD96FF762FECE40BD0476A7AD4B20
-:10102000E0EFABD7DE709544FB72B4F2A147D01F5E
-:10103000FEA09DC5F4173D3EC9D03E9A960EAFFE68
-:10104000FCB6D9D8DEA313B4B2FAB787FD30BE0719
-:10105000CDB1ED11CA68EF6341EFCF3BE6998E0D3C
-:101060002306F476D0E3EF2E9834A0BFDFFBCECC7E
-:10107000F6F1D057B2FC27DA07A5EBE18D1E9E579B
-:101080006BC4F3F51A1F037B7806AAD6F7CE591E58
-:10109000C076FBF3DE0ECEF7A31DACE7BD35AE0A7E
-:1010A000D07E28D0FB1F28C03CDADF9D3D7598A17B
-:1010B0009DF901F9031A3F95B8DF19EC0701F0C556
-:1010C00076F021C21FB6DB1C42D74E875B65888F46
-:1010D0001D878449885F8C3565DD00B03F55E0DFB2
-:1010E00088F33897203EFE7C01B7DB1B0B2B36E7DD
-:1010F00023AC9F1418EAE3EB0BFF487645C3FEAB25
-:101100002645EFDF5BDAF528DF07B6DB1C77DECF9D
-:1011100017883C8F78FF0B143FF9202410CD2D91B8
-:1011200042EBD0DE5CB2C48496152B0DCDA73C59A2
-:1011300036C7C270FC8F1670B834EEBE4EC5FD8443
-:101140008DF00F48806D092C227D7BCB1C9B03E327
-:10115000D88D8535CB89DFC9497E34E58CE3ECCF6A
-:101160007FBB3389F268D67799ABD04E2A03BAF8A1
-:101170005707F2D5A3BE1DC83F874C105B65CC3323
-:101180008CAF7FBF50C4F5873621A07EBB94E2228E
-:101190002C3A9F795417B7BF7A0B2C31FEC9DE0267
-:1011A00089DEBB42ED9B8EB8F68A144E467BB89121
-:1011B000F93F42BF170B38BC1417629DE40FF4DCF3
-:1011C000ED25BBC9E609DF371EEBAF90C86ED2FD37
-:1011D00008E7F6A7933E36A530F82BC48B3231FCD6
-:1011E000C8B7116EF7495A7C89F395ACEB1C13D044
-:1011F000BE327BB83E63077D06F7895CB9EEE4CF6B
-:10120000A6236FF504488F6020E470BFF9749BC07B
-:10121000E32B06BD99C94A25BE3F43F34BE7C16A9C
-:101220009DB2116AB65D1C82FE0C8F8AF07E032689
-:101230003004EAAF62FE365C97BF6A76E4460BD7AD
-:10124000D7379A6CA4AFEBFA70B2A78FECC4FA4E02
-:1012500081FAA92FFC31ED1758A6E5A5F7E7874BD2
-:1012600061CA973F5790ACE96F6DDC1FC5FAC81F84
-:10127000C69EE5EB009A27E5D1EB70D7F3CAF5F6E9
-:101280002C5ABCB45EF3E702C0A8FEBF0A74BD705E
-:10129000B5165FD5F3FE79BF4CF29645FB1D375668
-:1012A00033D647E3F2BA70BCF7A4054C85F0FE7163
-:1012B000C063C4B3E36B9343B8DF6BA3D0E7C7B895
-:1012C000875AC2E319467C4A2FE4FDA6F4446650CF
-:1012D000DED5FE04FB8ABA62F715017F58FE3AF4A8
-:1012E000535AFA8E82F8FDA05B7BFF1A46F9E4C6DA
-:1012F0007D45230ABDFF3BF71529827F275CC71672
-:10130000BAF9BE217D5F91C2D74BCFE330EE273AC9
-:1013100097D92DF1FCFFF0F65D242FAD6417BEFCCC
-:10132000616F1BFA99CF975814DC479176D31B6DE8
-:10133000944F23484D188F34EA034FF8A65F563870
-:1013400009F7A5BDA850BEB0411F48E407A05869E1
-:10135000949FE89AC2AFD70F606FFFC485F87646B6
-:10136000883C8079ACEA21316E1EEB92C244FE00CB
-:10137000FF9C68FDB44DCFF77227C5E43FB625C882
-:10138000F74AA4F74B09F3BCAE21FDADAD3FCFAB9F
-:101390004AD7DF62F358E5A4CFB597F5FEABC2BEDE
-:1013A00098B8FC3F6B74F2C5F3D4EC9804F34B642B
-:1013B000B75D6A9E81110E6D09E4E83D85F1F7DFA6
-:1013C0000258648CCBB7615C1EAE92C054F29FEDA4
-:1013D000EDCF33E8267FF10B05E4F7B226CC33E0FE
-:1013E000F967D2A1022F3E77AF39E0477B46DD6B2C
-:1013F000D6E440E819F49BB41DCA243F1B2B0C8F84
-:1014000043FE28B96764E0B9066D1A7ED67DF93CC3
-:1014100083C791CF19F30C7684263C90CDEDE7BEBF
-:1014200064D0CB76302EA7D483DCAF09E326BF5E31
-:10143000E4FE91A4AF0AB36D348F13AF58775A49C5
-:101440000F57286FA026439451BE7454979D42F9BC
-:1014500075021457A4E3DA5B5791FD9A687D6AD749
-:10146000C6C671F5FB5F769D5E29E4FACE71B4EFD6
-:1014700049D0AAE42F5EB256384CF9BA8638723792
-:10148000F2109213B179011FDBA7513CF6FB0F5705
-:10149000531C56DFB7ABEFD7655ABCC5BB562239D4
-:1014A000E1DD2D84BC3E4E2626B2ED65139D1F0264
-:1014B000E26D0B8A4415A8E632B82D9804D453BDCA
-:1014C0006D504E8779AD93D40C786EC7DBC9E47F3D
-:1014D000BDD7E3D5F65170FB4BDD2090FE07ED92B2
-:1014E000FDACB601DE403BE1421E17F8B490FBA70D
-:1014F000014542341EEDDAA6E551E8FDB53053371B
-:101500005E4D02BFDE2B4B55F1F43BBDBD367393F0
-:101510000DE32D9191268A677E6CF1CFA178606AE8
-:101520003E437BB1CDD9B4B68AD7130FFDD81E097F
-:1015300050FD37246E28306F2A8EF7371ADD18D702
-:1015400075617B6CD918EF379E4350CB8205993972
-:1015500083F7E5FF4693871FAFF769EBA250BCBC4A
-:10156000CDECFDA50FE5E33A89E470CB080E37D347
-:10157000487ECD7657CE2139EC06FD94C6CBC79F69
-:10158000FD0D8F80F4D7E6E6F8F555C73DE81C81E0
-:10159000A27C1A6F1B1A0DD05FDB3A21C4E1C5C7CC
-:1015A000FD65FDD559455FAF9C3A21284F75239EB7
-:1015B00039423F44BF5F6D8B55467E7646D0E87F0B
-:1015C0009D48FC6CCB92542A1F5F9B477EA07EBA3D
-:1015D0003DBD66399EAFF065F3B694228E173F3756
-:1015E000F8E16ACA85A3D88E11EE8850922E7FE06A
-:1015F000D5E9D715CF40FED86062DE74D407D61A7D
-:10160000F2430CF43CD51BBCB208ED0F4B5F2FE747
-:1016100053E17C89F46FBB82707BD47462EF4F100E
-:101620005FF6DA29DFB06155E429F457BABDC1ABE2
-:10163000F0BDB377BE3343F05273A4279D3F5440AF
-:10164000E775D4B419CE41D8109B97C2D6A6F2BC88
-:101650008F8ED8FBB85F3FE6BD41F92AED9ABE1DDB
-:101660002C42FB62EA953CCFEFC3A5268678F1A118
-:101670009DE38F7ABF5393334A7EB45E5BA3D93721
-:10168000FDF871BF9DF0A356DBE7645C8F7AC40F51
-:1016900058B73A0D3F3E7CE1B27CC48FB37B2FCB71
-:1016A00047FCD8686EF7237DCDC90D2E2A82719D27
-:1016B000BC2AD06BE27C29FF52F0F676E3B8FE41FB
-:1016C000FA55475122BDC3FBDDE8784B8F99FBC922
-:1016D000547BEC3EA19E4BF4AB26F68F15E5C6FA83
-:1016E000C70A73E3EA5736FBE7EA57973E0F46FB14
-:1016F000C4F4384C8F33F2C05351F05A69E7F928DB
-:101700002B8B64592DC1F9D5E4D0BEB3DFD9949D9C
-:10171000C2D73ACF183FE02B1772D6B4E338FCDCBF
-:101720006FF98AE4EDBD1CFA7D8571BFA571DEBF3E
-:101730002DE0F933BADDADDB81C6FE0F68EBFDB3FA
-:1017400022FF21B4ABA75EB8487E84D3782E0FF475
-:101750006B0BFD2BD973ECA020D3BE352F8F8336B6
-:10176000EC5FF804FA5D9786B4F8E53E81ECF5A5E8
-:101770004F7E44F5E7BA6AA9DE7150E8C63868E3DF
-:101780000813C96D3DFF41F7FF341E2C21BF8FEEBA
-:10179000FF8171EC473F4DB2276221BE85F625BC23
-:1017A000D720F1F86E8387292AB2DAAE58BF899E16
-:1017B0001FB52560217ADF725008A13D9E6609FAA7
-:1017C00046103C47C894DFA2F18DB78BFC17905FA1
-:1017D000E9F96B7B72FCEF14F1BCB72CCA93D7D636
-:1017E00023D81F17E2FB2CFEF26BBECF229C805F3A
-:1017F000FF67919E677B23E9CF7F618194F8F9E7CA
-:10180000219E7FDE9FEFC6F3CCEB6632B6DECDCBFA
-:1018100078CE4C3D9E33A370F9D96D909FD165CCA5
-:101820002FEB8EE29B75521FE5B1EBE7CA60BE5904
-:10183000F4F30DB84F2387E79DC5B4A3F1D37471BA
-:1018400005C57FE2C45DBF1B6D7F1CD1EDAC127D71
-:101850005F4DC482FE9D952D9E08C6118E38B5FD44
-:10186000BE5A3EED4A7BE404FA3F563E934EFB4798
-:10187000FAF5FB3D56CD7FCEF1BE8EFF648D4B8ECB
-:10188000939DDF88FBFA85017A9A99D02EFB692E09
-:10189000C6638EF4DB656FE4E2FE1B9DCFD6299C08
-:1018A0005FD475097C1F5667EC3E9CDCD15FAFBEF0
-:1018B000A03F97E8FD8AD189ECD92F8233E7B7475B
-:1018C00012ED5FD2F8A40E47233FBA54F8E9F5FDB4
-:1018D000F003BA267E6B809FD18FA6FBC3589B4C2A
-:1018E000FE32D0493A319F53F7877D5979F89DD11F
-:1018F000FF33F2F0FBA313C9C3AFB63E89E4C4A51E
-:10190000AECB207988EB332EB13CCC2DFF776DDC4C
-:10191000C63C046DDC863C8423E6C82C7E8E05C064
-:10192000C737380F2121FE7D411EC2DF314F431ED4
-:10193000C2E7CFD39887F0F8A1C75C18AAC3FD6AA5
-:10194000E877E8D965A6F8FB0CD1E1E7F96122CF89
-:1019500027657E3A8FB3D16627FF82317F0E38D557
-:101960009A26D42FCB41EFC7FD3CDB5A492ED767CF
-:101970008AE4ABC47C41D91B273F53AA4EE9F60E3B
-:10198000CE13C3FC773A17E012F3C4F68EEECFD72E
-:10199000F4FD9DF99AFB477F893C31258FF3A757CA
-:1019A0001D7F1A127D5E66453118EAC589F3F47F02
-:1019B000A2D14DB296DF6B935416ED8F4AF4DE2F11
-:1019C00046737BE7554BE4ED4ED4ABA0198C7B6698
-:1019D00058C09A2E1DD8EF7EAA207014F394411F90
-:1019E000A1F53DB7FFB7E4EF7F3C93C99837FFB847
-:1019F00059A575568732C26B3D9F41EFE72ECDFF4B
-:101A0000FD65F9CFFBFF60B9208DF9EF910B5F1BEE
-:101A1000DF1994F7C4E9F1EFE037447FFDFCC4CC53
-:101A2000E341FA79175F28E7BE6E3E63C8D74834B2
-:101A3000AFBF1630C29FC23181EC31E417F3939FE0
-:101A4000F152E55F7229E843088F7D562F929A4D37
-:101A50003BD7826DC8D4FDA2FC7CC1074792DEF95A
-:101A6000A19D8F573FAF439FCFE5630CF8F915ED6C
-:101A7000582537F08D3130BF93D3FCB4EFF75E2794
-:101A8000D7DB22CFF0BC77E3F9134037FC3C0EEDF7
-:101A9000DC5FE33EFA6F1BC7F70F92DF0DFFDBE958
-:101AA000E812E5F7A5CF23D69E3DE2E4798503F65B
-:101AB000EC7FDBBC2E495EEB79C665157D9ABF5F76
-:101AC00060E8EFD7FB69ECE3FB741ED2D653BFFF8F
-:101AD0005BCDBFF7D618FFC388AFA5A5DDDB71BF0F
-:101AE0004A0373318CBB3774DEB1FB4D0FDF7F4B84
-:101AF000E5421EAF640107EDCF7E3C2FB8750CC9DF
-:101B0000C1F01AA4CF511E56867183F585B359AD25
-:101B100083F21042583F6A5578FB9BA59487D58481
-:101B2000F4AAE721975DFCD39AAA521A2FF97F3DB8
-:101B3000D6D8733B0E8FE1F24CBFBE3246D0E2AE38
-:101B4000FE4C1CCFD9257C3F6AA3C72FA31F598FFA
-:101B50007B277BFB286FA0611F378ACAD056C4FA47
-:101B6000BB46107D35EC9B5682F150D6692FA1F310
-:101B70007E7FCFCFD93E7BE730F2374E290CBE8433
-:101B80007CC9591ABA06EDE851D00FC64DCFEEBD4B
-:101B9000A62418876FA68BA92AC695D345D6F9889F
-:101BA0003CC0B7C07E9E4BFEE23511F2633D3D86E0
-:101BB000DF6FF470B9DE78B09A2D740C941D9ED846
-:101BC000FD573F2BBAEA691CC7D363242D2F93E737
-:101BD00081FA400D43BFA1119F7C5A1E68B596E75C
-:101BE000CC54DB407E73F617E781EAE3D3CB7A1E51
-:101BF00068F2A7DC7ECF962D9437E25CCBF92A5BA6
-:101C0000C5286E7045A46F7A0AC029B7A3FB0A8461
-:101C1000530A829DCE7F0DDF371EEE7B864857A08C
-:101C20003F647BF3841ED47FA5757DDFC025F1B6AC
-:101C3000CB15E8627C3C2F7082E480D454887CA968
-:101C4000E22D33DFA7B42E99F4CA8EAC3ADAA7742A
-:101C5000EE1D6BDC7308F4ABCA566760DC217BEDCC
-:101C6000AF282FC0B94F88BB9FADB2D8A1ED635A42
-:101C70009D81710CE7DA3EB51CDACFBE5F609A1920
-:101C80009D2964A07F5832A17CADEDE2E7DBD5B69B
-:101C9000BB2B6C246FB8BF865DE1213922ADFBA65A
-:101CA00009F984D4025A2CCCF3F2621E9FCEEB9039
-:101CB0004D28A7FEED33316E1CC9563CB0DF05C17F
-:101CC000556F8DF466F806F27CF47D2EBABFA75FDF
-:101CD000FEEC9B4FFE9E4BCFEB8EDC4C79839FA599
-:101CE000517C65A68BDB232088B4F35D62DF1F7413
-:101CF000BE8BA6B7E876B1910E8C79D2B9E5C388D0
-:101D00002E808F766E9163F85EDC7CE96689EBDD70
-:101D1000300FCB4A1CC7B40C05FD735F363FDD683E
-:101D20004FF7EB399A5EA28FFBEFCDE7D6EBEB30A6
-:101D30008F3B8EFF43D76BDAF47DD09FF1F3B7462C
-:101D400069F6C4F1F57F1DC7CF39D4F346427495C7
-:101D5000CCC03F097FC257AA8807FBDCA686628AEF
-:101D60002F35503BEBF8F9FEA3D6E6AC2E2FC5ABD2
-:101D7000CC0480F7F103CB4651FC16E8222F0E5D10
-:101D8000BC3FC6CCDB5F974C782C3DC4280B52720D
-:101D9000A7111E4B8F727C7D6F0CC72F3D6F4D8F2F
-:101DA00003BE35263817F729F69FCBD19CC4CFE563
-:101DB000D0F2BF9DCDEFECC1F32EB66B71E09E5714
-:101DC000C6CCA6F8DC3A4940FBF063F7FC51E8BF0B
-:101DD0005BA0E1B953EA63B2239A5E7B68FF60F6C9
-:101DE00021BEEF49D2F254A5759E1D889FA22F48AF
-:101DF000FB24BFD1D62D521E947CF2912A2FDA1DDE
-:101E0000110BE6AD7DD0224556BB497F8AF193196F
-:101E1000FD5E4CEAA4BC9CE6E27FAC1DB2B138A1E9
-:101E2000FEF495F65FB02FF04F7D55BC4EE49FBA9F
-:101E3000F47918F75D70FB84BDC2F39BE2CC2BC62E
-:101E40007FF9B5CF4BF75B1AF3D506D131F77FE8B1
-:101E5000F6901E7F607E35269FBCC72C77A3DE835D
-:101E6000F9B92F28A8573F6D8FCE27FB370DEFFB11
-:101E7000CFFD63213BEED73FAFED376692B216E35D
-:101E8000A07788CE76B4EF5A31CF1FF54B84AF10D0
-:101E9000B5DFE15D27E53D344B7C3F0453F97E8A95
-:101EA000950B9B9EC6F757B6A4CB087FB5A2E979E0
-:101EB000DA2F61628156B87EA27DEF421F8F9EFFAE
-:101EC0009F487E0ECAFFFF82FD0B9909F62FFC8703
-:101ED00086F7850B18ED5F606BFD3B705C1D2D1266
-:101EE000C3786F6A152F8F926CF4FD153BE6510F86
-:101EF000A1FDA694EF1C017862DEB61DF3A887E071
-:101F0000FE127ECEA130BB8AF02F15E0837A41AB62
-:101F1000999F6BA8DEE0207C9A5EC5E397A9010B30
-:101F2000F19FF34CA1BC7B15CF3FF3209EAD26FC67
-:101F30008C38D328FE9A9ACBF5487BC062B2F92838
-:101F40004F9AF03522E879D29CEF75CCF752FE7AA1
-:101F5000FF39870B19ADCFBABC1999F8DD8161D76C
-:101F600059048CD7E872A642C38F8E1DDAFBF5FCAC
-:101F70007D3C0711C7C756F2F7FBCF41FC1EAF6F80
-:101F800096C2748E10E830DA397CBC7EE5DC34A26F
-:101F90001F51DBE7CA6ED2F2F4057EEED4CAB9C394
-:101FA00078BD8BF341766B9226CFB5F76F4F0D69F5
-:101FB000F1029E6FBFD4A49D1FD0CE62E2B91A9DDC
-:101FC000A57EC17E8D8707F2EE899E5BAF9129AF1A
-:101FD000503FC7B1C261E1FBB86CB174F542712AE0
-:101FE000C7FB72C586FDDEE2F3FBC6C6F50F87E6CA
-:101FF00047F395613A5FB9D562B0CBD2395C5D9158
-:10200000ED7CBF97F592ECB2C471C5673263E38A89
-:10201000BB33A3E38AFAFA562CB1105FE9707B5FF9
-:10202000C3FCA32D005A3C17CF38EF2DFDE75B878B
-:10203000ECA8971AEDC12309F28CE68FE5768F9212
-:10204000C00F317F6C22F992204E5B62FD6F8A37A0
-:1020500073FEDB93607F5F3FBC74BDC9668C7BA859
-:1020600097E4F7E9B1FD80F8A0BF5562F62BA16CAB
-:10207000D88F067C90F8A2BADA2AB77A908FFE80C1
-:10208000F8623358AED628BE08E6E865C88F7BEE06
-:102090002EA4EFD9BC76B742D7F376A1531C8FD7C5
-:1020A000C83CD498163F77F8463CEFF9BC3392858C
-:1020B000E743DFF3FC9BDFA1F2D0C8312CB73D270B
-:1020C000CDA1725E643B9E17BDE5B935BC1E696C3F
-:1020D00018633F187BD77754077D7F614D1FEAF760
-:1020E000A5863C7EC3F9B5B8DF14E793EEB050DCAB
-:1020F000375DDBE7CB2A35FF10667A21DD65965028
-:102100009E9E8379F7F561FD082E77A1BE05CF4726
-:102110006DCDF3F13834E37C808DD0F238585845DA
-:102120007F54ABCF4DEFF7EB77FBAC5A1E18EFFFA8
-:10213000E80BFC5C1F7DFF3263F248B41B1D5E168A
-:1021400053D6CF8366923C12CF6F6DD5F0402FBF30
-:10215000941E0C8D8DB22B8F5E754731CEF3C31755
-:10216000EFCA457DEA6AED3B5046BC6A1CCFF17B65
-:1021700075F2DFE6211F7F5B7429E43F480FFE08FC
-:10218000F9C6424FCB2437E04FA53C8DBE373345CF
-:102190009D2B205F715FCFC7E7AE0C080B8B07BE8E
-:1021A00043333428919F9E053B44D4B7879E0CC887
-:1021B000089F3A5B244B82767EE309BE80E3FC787D
-:1021C000FE7BDFA7BCBC61478FE1B99247CDEDD361
-:1021D0005D884F3EED1C6126D1BE9ADEE1A3766A92
-:1021E000DFD3E1FB6BF2042D0EDB5D8972E15AC691
-:1021F000F116CB58FF4DED9CB419323F777346A9C9
-:102200008FBE8F368B4524C487196F075C0CE9E3BA
-:10221000FA6069BC732BF42BCB307BA3E9E71A6F10
-:102220005419FE7DB330B6FC2D25B6FCEDF2CF0A75
-:10223000A2CBD592FF9708CF97052E7FD4C95CFE1D
-:10224000C8AC7335CAC71F35C91328AEEE11542C5C
-:102250008F796918E525B10C9ECF30DA951DE270B3
-:10226000C8D98AF38A809CDFE9C1EF2CF1F3AFD2A1
-:10227000DEB6ECC0F31598D7BB15E9F0457321E540
-:102280006DA6396AFEB585F41927CB233EE5DD4AF4
-:1022900078EDB479F1BB0F879D3C1FA1F52113C5E3
-:1022A0009B0497CDE487E7C49D1297FFCE25D3B159
-:1022B0005E2C83050159DDE3E6DF6D6A9DC4CCAB7E
-:1022C0004B70DD94B7492F72DA28DFBFD255F85D25
-:1022D000AC175D163A0FE2B0B32CA8F5C7B0FD27D6
-:1022E0009D4BE87DE4D16630C87BECDCBF2E827D5F
-:1022F000BC9AF74FDF67135730AD7F1BB360B986C9
-:1023000051FE7E8F5BE6E3BDDD44F110ACBF92C6AB
-:1023100067A37AFDFCC281FDB2D3243AC75D605A3F
-:102320007CAC85CA8F697CB0D52C1F463C55FFC05C
-:1023300018AE47A5EB53A203D1E452E8BC1D3FCB36
-:10234000F5A431EEB380E7C534B91BF3D9C5152E1A
-:10235000B29B51F3C1FAE1F893E85AF2B332CD35AA
-:1023600043FDF98F231E8F125800D723388EEFA319
-:102370007DC2747413E55738025605FAB1DCC4689F
-:102380007D95E4F8FB64C78FE3743A78FDCA323078
-:102390008F4370957BF1DAEA2CF7E2BE9F1EB7926D
-:1023A00011882AC7599710E2CDC0BAD8BA4DE37048
-:1023B0003D142FEA175FDC1ED43B703E1A7F1DA62A
-:1023C00078D10ECD75413BC0F79521F1E7111CC7BF
-:1023D000FD8B9DDAB97AC6FA99E34C5FF73C0DF8AC
-:1023E000F715E799163BCFAF719C61E16B18A79881
-:1023F00005E3730C8C0F7ED2395FD73A4C845FD7DC
-:10240000EAE72D15C6EEBB30EEB3606CD566E4335B
-:10241000576BF9A315C9FF4C7EFC6B40CF47B9D66B
-:102420009BFC835CCCDF9C91D2D2C689A3E9EC42B1
-:10243000E4C73681F8CE3759F71ABC7F7E5AF0715F
-:10244000770EF1FDDBC60DC5F3538305A950FED011
-:10245000DC9EBBDC477CF1F67193709C11A2BB6BD8
-:10246000F17B6C487733436D58863E9AE8DC2DA0AB
-:1024700043A45B9D0E078F1FE8129E1FDEE4A2FDA2
-:1024800050DB58376D68CB60ED02F7B73491DC62F2
-:10249000DE9103F304A29D616BA279FCA44525F9AA
-:1024A00070B5FB1109CB4F2AC1F538AE39E33FA215
-:1024B000F3F259C6FC02B43B61BCF7E13CFEA7C68F
-:1024C0003B789FFAE7EFA3F847D9A3CF6B74ADDB56
-:1024D000A39E24D027609C5EC1A530D01FFBED5386
-:1024E000B38DF21206F6F5466A69FFB09012407994
-:1024F000A6EFEB35F2DDA95772BEFBE17297B29AF7
-:10250000CE39DC4D7669E3F50E7DDF2FE95F8D4B2B
-:102510004CDABE5F81E44A03B3D1B943FDDFAB833C
-:102520003F216DE0BB1E0770FF6FE9E7EDFFF5D2BD
-:10253000FE6275158FD3F7DB77F532B75FF5EF43A2
-:10254000DC9EAD9FE3CFF594E5EC4BD9B771F60572
-:1025500093DEC8524C9AFDCAF5858EC95E59651442
-:102560005FE57AF85C0BD56F4C0AD1F7566AC576F1
-:102570004292E3E3DCBADFD34EDF65B228F9C82725
-:10258000F438EB9CDCE07F225E2F2CF66709309557
-:102590005A0B8F9F021D6CED83B7AA58D393F8BDD9
-:1025A000AE6B58D3AF4D3944076710DFE78CF9881D
-:1025B0007FC76B800ECE623B36C6FD01D76A71A223
-:1025C000973F7CAA0DD7FDBCC0F8FEAE42E3FEAE3D
-:1025D000C09FC7F17896F63D9E58BE13358E936620
-:1025E0003E0E8F28D2382EC41BC7203A6421EA1F22
-:1025F000D6B789F69F1BF0C8381EE1E01DB43F6EC8
-:10260000EBCD4C1627A31CEFB3233C472046E4E058
-:102610003C83C9E327913C0FE2B968BA5D3D68DCB1
-:10262000A283D6F5C6B9FD793AB332CB304EC4FB9E
-:102630007D2CB9E151F47B34DE6C26FE5E7D702C7E
-:10264000E969BDAA55C6244856C9F36B14F80FC7EB
-:102650003587F9AF72433BD7C9D574CEDAF5338DE0
-:102660007939EA3D4DF0FE0D5A9ECF8DD79B8F47AD
-:10267000EB9BE7CD1BCC0807B5D6D1244EC1F6A401
-:1026800081F77D83E132E89CA736CE9F18E839D8E0
-:102690007E6B7927F1A7447C6AFC787E2E14B455B2
-:1026A000F077E6FB5C36FE4BE4FB4CD0CE857ACD72
-:1026B0001CA1F33B5F1FBA78EB729867C10F8BE9DF
-:1026C000FBA557A52D7DF221283FBD6534955F4FB1
-:1026D000BBF9B6A358BF3D9FCA95A68FE6213D140E
-:1026E00096CDBD16BFFBFA9A9DB7939114ECA886C0
-:1026F000E732C6654FC003612A2D117AEE9BE3EBEA
-:1027000027A23FA63289978F94FC760295B3B5F243
-:1027100084974763F935E1A379F1F8E29842A1BBC8
-:1027200008E46D652A7F7EE6846786A11D5F59C136
-:10273000CB639469EB72B0DEF4C779F1F4A505E3DD
-:10274000F97CA75E38DF36C4836161FE3DD297FC19
-:10275000EFD1F73902206F71FF7EA09CC7E102FE26
-:102760001209BF0755E1E7E5E98E964CE483B38291
-:1027700096528CBBCA0E5F1B7E1F31A57CDA245C8F
-:10278000F7E9A06E639C13E86B09C27FCE651F65F5
-:10279000B9482FD5E94B3613BD273EA7B19EAF5B95
-:1027A0002C3D407B2B906EE65C1E2B3F07D1AB018E
-:1027B0000FAFB58DE0780772D15A3E985E8DFC9BC5
-:1027C000ADE914A2E9751BE2A54874BB1AC76531CF
-:1027D000F579F1FE2841192D7F0EFD9E37BFEBA341
-:1027E0003810DC102F8FC337E04FD2F57C3E0A59EA
-:1027F0004EA3FC659ED773F0B7F43E6E071133A964
-:10280000FF8771FE6C0D1FCF363CBF44447B2FF811
-:1028100004F289860CFE9D498CEB239D66E8FCAA98
-:102820002B76BEADE5CAAD6E71F0784D360EC7EBB6
-:10283000357DECADE6C0D01218EC8DACC98CF37DC3
-:102840002CD9A5623CB7B1869F43F92FE9C1271166
-:102850001EA2493D1486F242E6E7DFAF94FCBBC6F8
-:1028600047E95F0DDABA34D8DEA57C36FCC3F351F4
-:1028700006C1A3CBC84763E73FB02E7D9978CDC48E
-:10288000F35772709ECA5A31CE7C98D4B42EDA4F68
-:10289000FFD817FAE919F7B72856ED3C95C8BC6878
-:1028A0007F5CABB3E9F1683B19CC323A07E9484B9E
-:1028B0002E8B8777BA9E7444D0FC5AA0F7A23EF0C4
-:1028C00049D2DF483F018A0998B3D0AF358BF4185D
-:1028D000C16293317E9D519341F8BA09F412F4B369
-:1028E000AB159D39E42FDF2E323CB760000E30125D
-:1028F000DF007E7E383E9B7FF7AB1F1E2AF1518B97
-:102900004988AB5F7D38DEA49D9FCAF79736D8AC67
-:102910003CFF53FB9E859EC7D2602B5ED344F3B32E
-:1029200071FA31ACD3A0BC16639E9C2D9DF40B793B
-:102930000253501E0ECE8331DA092ACDE35BFDF13E
-:1029400005C6F59F3B9DA4FF7C4B8B2F08B33FA58D
-:10295000F54905FCB27A308EE015D05E492D3D2A4E
-:10296000B1B103DF9FC4EF36A13FAB2B3BF87FC76C
-:1029700047C5E3DF9CF434E5851C33F138A8113EEC
-:102980006685C7816416A67CD5068D5FFD3F379CA2
-:10299000204A0080000000001F8B0800000000009B
-:1029A000000BE57D09785445B67FDDBEBD25E924E1
-:1029B0009D104242583AAC4102762721806C4D80EE
-:1029C000880A4C585450841B886C59059D41C73166
-:1029D0001D02880ECE84272A4F511B0444079846B7
-:1029E000D9D4C8B48088CF2D6E336E8F495C5925F9
-:1029F000864171C637FECFEFD4BDA46F13067CCBE2
-:102A0000F79FF73DF8B438B7EADEAA3AE7D4D9EA37
-:102A100054B5D8633BD19825F8CF8FDDF0FF4E49F0
-:102A20005FF61542053C02704088F642ECEE50E439
-:102A3000F052795269C847E5DF7ABB8518807A2D54
-:102A4000B3A89F1049EECC91491E027FF8F1C71F31
-:102A5000F3859882AAEE427CDA5D4BC47BD78BA2C9
-:102A600031564588E4B19A4D73093146A5FFE50911
-:102A7000D1B245093AE8F9687F8C45A4085179C874
-:102A8000160C12BCF055EA84E0858FAA4141708B88
-:102A9000F0AE6944FB80C31DA0F2A1B8FEBF1D4A81
-:102AA000E5678FDABC0EF41BF0BF9345FD96A05F7F
-:102AB000827BAFB1088F539F17FDD727182B3C5946
-:102AC000AD70DFCDC926B85FA8A3A9FDE57BBA9993
-:102AD000EA7DE1CB4CF5B987724CF080862B4CED4A
-:102AE000077E50608207375E6D6A3FE4C824133C5E
-:102AF000ACF90653FB11676799EA4B130A0F2EA630
-:102B0000F91E4C538532488891A2D4D4BE542DB3BB
-:102B10000B0BFDA3CEF66923BD57457F999EEA7442
-:102B20002BF07C668F22DA650A31778DAC37DE9B1D
-:102B300057BF6A790695F383E6E7A5C2DA0AD37B25
-:102B40008B3F99FFD68188FE7AA7145B92A8BCDAE6
-:102B50001B9FF2651C262C06FEA8325DBD61D0E9E4
-:102B60003DD5EB90A4603A2FDCAA04EF253AF6128B
-:102B70003D1F02DD88CE22E8015D657DCB5A351808
-:102B8000A07EBEAB9EF7D6011BC18772D73412FD63
-:102B9000E7D638DC2AD53BD2CCF48CF198E91997EA
-:102BA00065A667BCD74CCFC441667A26F9CDF46CD4
-:102BB00037D64CCFF645667A76986AA667BA66A687
-:102BC00067C63C333D3B5799E9D975B1999E9981C8
-:102BD00005A6FA68FEEDBE62A1A9FEA1B8BD5F6AB6
-:102BE0008487948EAADB414BAF67DD1DA6EF097584
-:102BF0009C7D19E1AB344315AABB950F02F457AE87
-:102C0000EB2A5E5F73880F1E263A9C112B0F6678A5
-:102C1000CEE7878A3DABEC589F3F951F7E0D3EE87F
-:102C2000DBCA07C47789F8CE8FF833E2FCD2A0F371
-:102C300044AB7F9597E4C806AFB61AE5D4DEDF74DF
-:102C4000B192DC1045C5BD8BE2857089E619E0A71D
-:102C50000A91E0BD17A5F3934CF00BFE38D2E97F43
-:102C60007ED1C34A785374BC892879A6D4FF29132E
-:102C7000F35E4BCCA8A2FD849002F9D54934A4435D
-:102C80003EA58B2A05659AF0AE50316E4FE756F996
-:102C900097C184B184E9FD0F4B6CCCBF4BE2FA6F56
-:102CA000015F7E502BF9F2349A0C16E20611B2E164
-:102CB0003B1FC63ED219FD1510C295C1A8ACBB0979
-:102CC000E39F8EF17B85B84934DAF0F19942D8510F
-:102CD000160B0F97B385DF8EF76F16E1E598CC1FC3
-:102CE00053B45DC04785AA754D053E3A3574819C45
-:102CF00015AFB7C3A02F8857435EBF8B7F52BBE38E
-:102D0000DEA2BDF8CE28A7E7D607083FFB2C625EFF
-:102D100088E822C6B5E3710B6B51BF49FDDAFACEE4
-:102D20001296EF2F289A067C07D29DDE8D40725AAC
-:102D3000E81985E67759B227E7DEA4D6F66F782D35
-:102D4000DC9E582FA050FBA777C432BEFA76589766
-:102D50008C79FDD47E3FF4FADFC3B88DF6179BAFB4
-:102D6000DDEE5D701BF5DBAC88AAF53488F774BA2C
-:102D70006438887F68BC196A82B716748B9B71B0FF
-:102D80003DE1A1A283F629F4D2D4EBAF5A0E58D973
-:102D9000D7CEB390C677AAB8311FE325FC7F89FE52
-:102DA000CB9C847F9ADAC9CE5AEF44304591C43F18
-:102DB000FDA35F519BE397E339A0E37F7707ED1411
-:102DC000FAD96769E8E2051DAD0DF94C47B79CD704
-:102DD00049BBC4CB85F05010D7793AF05FE27078E8
-:102DE00055C2678122BFFB79E2CC199534EE9B2D49
-:102DF00045A961D534EEFFE071BB8ABBA663DC3622
-:102E00007DDCCEF63ADE3DD95857171A772DBE4FE6
-:102E1000780AFC4A096ECCC4F3F05380770BB7FBF9
-:102E20005E1FAD398BD4CBCD354A703DD5BFA5E300
-:102E3000F9511BB5C3BA748AE41A1ADFCF862D5B29
-:102E40008776BFD69C3CEE8DC27BD9EA4CD043B08E
-:102E5000BCCFB85B09D6123C4B7899EF4B445197E5
-:102E60001DD42EC3A7A5FA681C7F8EFBFB804C0BDC
-:102E70002FE301EFD177762DE9E0BD17D0D04BE3FA
-:102E8000FF2C921CE87FD278A9776ED6F1364514D4
-:102E9000F13ABD4E5471490BFE6405B59B4AFFC221
-:102EA000FA24B81FC6370DB0AF755D4F170D5CCE55
-:102EB00010EE171BE95BEFD474B8ED766A33C9D214
-:102EC000DCC5AE629DD2BACD64FCF7F311FEBF1D26
-:102ED000F3F6610578BF93E418E8BDBAFD25F1F17A
-:102EE0004445E293D6ED00E081D66D9ECF12B17ECF
-:102EF00046B797FC6775F7FC47EB870463427AAAED
-:102F000010574A51281E3A9D2052689E0DDDD4A0CC
-:102F100023137AFA4EEB0E9A6703D9130ECCDB5FBC
-:102F2000DCF114D58F257D7BAF94AFF1018227F8BA
-:102F300055712FF341E3D2F9F4FCF541544FED5FA5
-:102F4000A911F17904BFE2B3796B890FC79CD50E43
-:102F500024523981E47E985A5F9DB66A34EC83B17D
-:102F60009D488F44E889AB7B98615A089D40A76BC8
-:102F7000747C8FCB36EB9D09D03B46FB36F40EC9F3
-:102F80005715F8BDD1A7EB9FCBC465D03FFBABF77E
-:102F900088CF48BF187A6814CD30947D613D64B500
-:102FA00017CCF631DE3C76AC8F59566A0F7CBBB538
-:102FB0008E1323D6CB4BF90AE3D7438AC742F37F5C
-:102FC000EB901A047EACFEF010E06FE18B0AF3E99F
-:102FD000233EAD02DFFBDAD638077CD330343751DD
-:102FE00050FF9F56D3407AD3FAAD760A3FAD852F76
-:102FF000ABDD0C1FA94EE3F258B587CB13D5595C56
-:10300000FF75B597E1FDBEA25FE07BB3567C63D54B
-:10301000B2D17F15DB478B6AAC02F45A14BF50C2A1
-:1030200036A71B42F8EECE072D7104DF1D54BCD02D
-:103030008BF3770497C34C2BADF7DB5D042FEA9C31
-:103040003CCA85F60F28CCF5730E551DC474BF7E9F
-:10305000EFD3EBC68BD6F9969F5584464B2E7B80DB
-:103060007F39FAFFAA7A108FEB68B59FC7E5AF6F7B
-:103070003AD88EBE77BC7A2CC3FFEE2B5A09BEF528
-:103080008B6FD88E18BFA5C90A3B638C5FF183CEC6
-:10309000C3FD2218247CADB149BDB286F40AE4C058
-:1030A000C87E931EBD5540EE6B0FA29F6B93678F3A
-:1030B00081BD3A615031DBAFD7FF20D87E35F8FFB4
-:1030C00062EBC8231ABECEA0FE4E06247E5A76BC02
-:1030D000CB708B95F04333DEBBA3B454907DD0729C
-:1030E000F61DF99CDAB19DBA53B65B6893ED16EE06
-:1030F000FC75323F57946611A1EF8E131D05E12137
-:10310000CE99F1E8E7849FE35B7F91A645F0D7F184
-:10311000E4D0B71F414EFEBBC5BB9EF954FBEC7912
-:10312000C8D1A56E96335FDB425F3E0C39DB99F464
-:103130002AD757C54D223EABB00B8DF94E687D01A5
-:103140001F8F15338B5CB23F4F6FF91CFCD86BDBC4
-:1031500043DD7EE969ED6F73E8E68F1E061DB67DDF
-:103160009C70198DB78F2A422AE62FE438021B6221
-:10317000B99FB267EE49F613FC94225A54E6F72041
-:10318000F3F3AF6D622AFACD52ACF6C5C9E457DD50
-:10319000B73B03F3EEAD8A2A95D6E5ECDF3C97F119
-:1031A0001CBDF724C92295C6FF82CDFBF51E7CF716
-:1031B000511A3FF5FBE47DE539908725FF32FF3258
-:1031C000E0E18F105A4487DFEDDECEF602F1A477FE
-:1031D00014C9B57EAB5F5A924EED2F5FDB64E948B0
-:1031E000A56F83528BB274CBF6776AA8BF5CB7A584
-:1031F0000AF6EBC73E0F8F2B27B46EBD023DF0C31E
-:10320000131DB12EB3577F53D0515CD8CEF85D97C4
-:103210000F5A8A3D2C17F8FD9DF593DFBD51C08EE6
-:10322000210B06E32DB67B59AFD1B46DC0CF8EEE26
-:10323000EBF0FE2E4B80F5556096B4734E1605FEEE
-:1032400015F32FA7F60182CB7D0D4DB7537D795233
-:103250003711A0F91F092E9A86FA818A70033F154B
-:103260003B1E28EC48F0C9A1C2AB50FFF3769E2E5E
-:10327000647DD8996C757C6F476DEA0DD087D90550
-:103280000354AA2F5243DC9FA894FD55D66F7702B2
-:1032900026D427ABC46749F523F767785AE96369F1
-:1032A000FC4DA695BED79EF429C6BB2633905EE59D
-:1032B0006AD5BF19BEA21F587EB9EF2FC677BEA030
-:1032C00071C13EBB547D69B754CDE7F1A409776065
-:1032D00070EB773B5BC2F3310F5A1DEE007D67A3A5
-:1032E000BB611AB723F8B7DCAFE6CA1900FB8AB096
-:1032F0009E22F57B2DFA754FEE027A5D6AFF0FC5AF
-:10330000FD9DEDB44A4B82D791D76AE74C6D57FBD0
-:103310006223D1EB910E5A1AFAB959B79385D5EBBE
-:1033200081DCBFA3833F3D87ED34D2C316D6BF9D5A
-:103330007322ECE673769BF3D2F4EFEF3AF8BBE33B
-:10334000FD4B6DEFD1E312E7E4F0991C931CAE8DB9
-:10335000B70B1F3DAF5DEDE038863860293B48FE76
-:10336000CA307CC2D2FABD45F1391DA01F6A8568FA
-:10337000135F7B69FD6B84DB30E90D8DE4C0F0B336
-:10338000CDAAC672A2617F621EE4ADF0C77B103782
-:10339000B0082D423F467F87E85580F98D14714271
-:1033A0008BD0B37E9164C7BA15AEE44B9C77F80915
-:1033B000B3FED9F744E4BC87B67C1007138CF0D178
-:1033C00001E585E6F5A23EAF3F605E543E9F5F3467
-:1033D0002587BE3FEC2F6E2BE637CC3AB18BAF1B67
-:1033E0008FFB068C7BF85F2CE671FF106B822F75CC
-:1033F000FCB729E4D8818FBFB107B1FEEA612BD0B9
-:103400003CEAE76707B1DE77D945C009BF67929DFF
-:10341000EDE0FAF8403CE46ABDE20E21FEF482AD34
-:10342000619AF48B847BA30FFCFBE623E0FF1B5A1D
-:10343000EC0AE2591D1DE24BD857424D141B532292
-:10344000BEDFDECD710E157A2397E0C1FAF36976FF
-:103450007E5E6B13AC2703D362795CAB93AA5EEB01
-:1034600047F5AB6B32BC3472F18108AEE886FA3BAB
-:103470005596E7432CEB373E08BF67621AEB99D5A8
-:1034800049E18C4AB49F7F993740FCB0EBEF2AEBBF
-:103490008FD53E7F7AB20B7290E43CD179F5447FB0
-:1034A0007A6C0ACA540BE6DB91E43C3FCFA4765415
-:1034B0007E6493ED3ED4E946984E87BC7DB8A4A7C0
-:1034C00080FC599753703FE8840A27F1F3B59204C2
-:1034D00062DACD0F88DBD14E53836A26F0F29BFB74
-:1034E0007A117CC32CD58D38DDB5F3629A94FE54E5
-:1034F0006A6AD891402F4C19E38FF4D7D7E5F8EFDB
-:10350000079DCB437DBA7F1EC1C7D36EEEF973C84A
-:10351000874FC98F86DFBD2C557B84D7E91E1FB727
-:10352000DB43C6CD8FD0134E4F7FB6B74B0C3F3326
-:103530003C1BF8DDDBEC643BF642FC2084D77919B8
-:103540007DFF418B08819FBBEA7ABD160100D0390F
-:1035500014C37C307692D3CFF12A97653DECE8C74F
-:10356000895ED06F819D0EA617094AA6DF837B3B3B
-:10357000B35E9AA9CBB1DAA9B1FC5EED765BD0025D
-:103580003A2BC1A736E1BD1763587F96D905FB2BAF
-:1035900065CFF7653ED865F7672E43BF7B1D526F39
-:1035A000277812B9FEDFDA09D4BFA0EBEBB2D870EE
-:1035B000AF24A253E7F65A3DE8417C57C5CFEDF260
-:1035C000F9E160C13AAC4B41F64DDC7082857F1D5C
-:1035D000E45580ECA08D5E493F8C4BABEDBC1EE307
-:1035E000D5681CA0B3B843E5F91CA6B58CF91DAE8F
-:1035F000EACCE352268D4DBF99EA3F5B18C771D7DD
-:10360000C34507CFC00E389CA6F2BA270975DF4024
-:10361000AA279DDB702FC195F33F7D73203DADA898
-:10362000FDB0CB1E4F2BDEA72F291F27880FA62FFB
-:10363000B8738248B8F07A9D5EE6804FD9BABE85ED
-:103640001DCE9D8449AE1FCBF17F8879DB73B54FCA
-:10365000C00F95D9646F131F7D6D6F780C7195CF76
-:103660003CDA9FF1FCD4735F6DC273616DEEC5FCF3
-:10367000E16C2C445CA6CC22E34A0FE56A5FE03B98
-:1036800096C604A65F65C8C1F48BCB6E9072F1CE6E
-:103690004BD307C7EA37EE52A89FD2D8FA0A2ED5E5
-:1036A000607FE8ABE34A3841E9CEF8D5B0AE4EB81A
-:1036B000C309A08F6691F65EE9E6E879D25053110E
-:1036C000771342FAA921FB101AD70212BD0FBBF1E2
-:1036D000DCDEDA3EB3958EF41DA6A3707D32E3974F
-:1036E00068FF549F9C7B09EFA5497B7E3324F37CC4
-:1036F000FC45C3C67CCE1F8FBE4E8AC2095827C761
-:1037000015B94E4E0829BF029B63F478811CC7D7B8
-:10371000CF75E071A4EAEBE86B456FF79443B623ED
-:10372000DE833D53FA7BC9770FDABCAC3703A44F75
-:10373000202F4BDB49B8D491E686BDD5510D586298
-:10374000C197D582D70B8D8DD7E5F16D19FCBE21C0
-:10375000D7449110906BA5DBD2D74BBB4EF79B3172
-:10376000016ABFE077B23FC090FFC79ECED0FB9703
-:10377000EB299AAED178C8CE9571AEDAF8FC0EFF7F
-:1037800028BE9995F6F15A88A0076D725D07E2A5EB
-:103790001E21BB256D623FEC4FD84DDFFD3ADE3E6A
-:1037A000D3EFC23E85F9B9F1BD41B9D2EFEC1A456C
-:1037B000F78E6AF34BB097C41382E544F43846E0C1
-:1037C0003DA2DBD34F9FA3B32AE94E8C64F09787C9
-:1037D000F1276CA0CF8776838EB766905C2F05AEFD
-:1037E000BAB5E271974FCB801EF91A30E17B5712C0
-:1037F000C1D9B0B7A4FE3060831ED17CBAE4C3390E
-:10380000198D904FB9D23FA88D49E82F12517609F2
-:10381000420ED4105E514F7A70665136FCE1B1F71A
-:103820007F6E6B9DCF97D57E3FA9A073F09C353EF0
-:1038300027D6E7DCB53EE7AC087AD46ECE3DE4216E
-:10384000BC9FD86C456452D45A83BFB92205CFD5EA
-:10385000504070BD13F83EE1DAF726DACD599B945B
-:10386000A346C8A7B96BC6F84B22E8D077B3992E08
-:10387000FD4266F8F23D66F8E7A4DB31BF9FFA9E91
-:103880002F6C86730F99E1DD839AD51FA19F5C96FB
-:10389000A05341D9A2FE08F91E5483F033BADE5971
-:1038A00034793CC147D6CEF682CC73DF5F920FFAF3
-:1038B0009DDC79F7AE727AEF48B2C50BFFEAB80823
-:1038C000FD713CD1634EFD2ABBD583F99AF97C97F3
-:1038D00045E7DBA7651C707ED05C7FBE7CA8D1E38A
-:1038E0004E222B92AFA2E94FFD5EE7A781952D9E58
-:1038F0007C3FEC9F79E388E1697C8343ABECC27544
-:1039000029FD0418AFD604114EA3F135DD1DCFF10A
-:10391000972B168F129FD1F7CAADEEFC5FD23C6792
-:10392000391577C0DD1A576FDA9E5E017DBAD16D09
-:10393000F1928F23DC83AA0E66E4C19F1021B71792
-:1039400071FDBB96C3EF9F5795C0F8992F821C97C6
-:103950009FB5D4D12A1FE9BF929551E3591D514F0C
-:10396000F398B7D6DC7EC1861F1D91B0E1975E51FA
-:10397000BF4EC57C6FD6C7AD0626B05EBE428F5720
-:103980007C8EA6A46FB6762FDA9D8BF6AB47CA7AEB
-:10399000AB53D7B37EF6F3CA5D760FCB33EBDBCBFD
-:1039A000797F87D621F4C3A1F8393F87BC3BED145A
-:1039B0006E870FED3586BF6C27FD42DEB7A0F6A7F8
-:1039C000D72AACD7CBDB49B8FC09258818703982D7
-:1039D000B6809F9471DA321D1FE0137FC47C40AF24
-:1039E0004858D419F1F130FBBF1555C20B3B4010BC
-:1039F0001DFD06DE783F2A6C3F023D1B50420FFB47
-:103A000060EF99BF53B9E74747247C2EBE4CA4AB67
-:103A1000E1EF07198FAA5DF821C7D5BB62D96E27E0
-:103A200005100BFD6ED3ED6BB122D81EFA6A35F48A
-:103A30001595CB743B3CB04AEAABD549FE5E6ED4DB
-:103A4000AF4AF7020F3728BA7F0BBB3E09F6F53EA7
-:103A5000EEB75971BBD727A1BD08C4A4B07D2DFD19
-:103A600084BFABACEF9AC97E5F0F7BDD170A633C66
-:103A7000AB1FC8647BFD0543EFDD1723EDF9F3EDC4
-:103A80006EB6AFC4FDD27EFC4808E9F7F6D0BE039F
-:103A9000DD67AB45BC1955B2C49F8EEF964CB25B47
-:103AA000400F31EFD2F645365A65FFCD345FC4EB97
-:103AB0003F578A0E5A22EC60679ED40FF905FE4DDF
-:103AC0007A3B2FDA9558DE663C9458841BFEFCC680
-:103AD000B3AAB012BCB1CE115C42AF9474F3F75AE2
-:103AE000988DF7647CEAB04FCAFBB83CE10F52995D
-:103AF0009427F555529EC5548AD132CEF2798CE482
-:103B0000C3E9A2A890F7073C52DE47CFA3B3FE9DBE
-:103B1000127B83793C9FEC67BA90CE732F017F8F25
-:103B20009676C7E7B728ACCF693EBDDC04E7FF4B0C
-:103B30000CC7173FD7F591815FE29F0188A31972E7
-:103B40002B49E797D5F7049F8A217CAFB211DF801C
-:103B50006EC4371BF398EE6C17AE9E96CA74BF41C5
-:103B6000A7ABB82F9EE936C4629178BE2F9DF14C69
-:103B7000EDC55FF1DE188FB4E72FD10F23BA0FC860
-:103B80001B70BE3F66D05B588303FED1FE4DF9EE3D
-:103B9000ADBB02C4FF0B7EFF4082A07647AD75A986
-:103BA0005E7ABF6CE3B2043F9547AC810437F57F82
-:103BB00034A88E0DB681EF453A3F60FF4049C5BE3F
-:103BC000AB94E3C79EFEDBF23B689CDF2AA219F2AE
-:103BD000B162C7F7CBEFA0F91DF43B9B214F8F5883
-:103BE0001B0B2177E717BBAA6ABC58BFE638FE82D9
-:103BF000271F48F530BE031996345EFF1978AF626F
-:103C000083CD0BBFAEE23DD5EBC1BA17CDCB31BEF4
-:103C1000E8F72B439FD9817FB74534771AD246BD49
-:103C20006864395FB9E3D7DFA809288F7E04FFA253
-:103C3000326AFF609EBEBF12BD8F303BCF9CC74033
-:103C4000F8E13C86008DAB27B38B8C3BD73EF5501B
-:103C5000FF26D80D1B5E4B50B25BF70F8C7D9796FD
-:103C6000D0ECC79FF75C785D7EADC78D5BE926E53C
-:103C700098670F0DAC83408081CB325B3801F67EB4
-:103C8000D93A1BCB91B2AD4F6C7A18FCF6A1C3DBCD
-:103C9000D303F8B41DF2A04CF1372B2CDF458292F0
-:103CA000DF4AAFD2AD5F143E02FB3A5D15E3885E9A
-:103CB0000B9E3D23DBFB45730CB52FDDDE5408FF67
-:103CC000A04C735539DBA0D7A8D04BF646571BF450
-:103CD0000A3515729CEAA9EF981E47F72AA243E617
-:103CE000F9EFCF5BF7855D48FFA0B95D92C417F48B
-:103CF0005D65482DB6279EDF9EBE3FE1F93CAE775D
-:103D0000C35FB9181D4701178813EC8E1749D0DB24
-:103D10001F3982E340DF6D8B1204F1FF57D62AC9A9
-:103D2000F78F2E4B859D37CF16487573299FCF7B14
-:103D3000EC36E6C7B94A55AA3B9BF93DDD3288E728
-:103D40009B8E79DEBCF65A9EE71CA1313FCE7B5498
-:103D50002D0A5279C62AC66E6F63DD9CD4E5944362
-:103D6000DCD21FEBE40C7D097AFC2BDDAF0FBC230A
-:103D7000FD6987989418B99FB457978B01113C0C33
-:103D80003D50D960E33885FAF699427CE7D64C6B12
-:103D900015F23D68FE011D5FCA8FD27FF120EFA1B1
-:103DA00012FF227D3AEAED311D1AB3F1FD16FB4DEB
-:103DB000D4EF5FE0277A4DEF31DEBE5AEF88552E03
-:103DC000A73255DAEFD1F3E8344031ECB877440448
-:103DD0003F556EFE8AF949A4A922314DC2D8BF7061
-:103DE000CF72552512DEFEF2DE6776C4BF032916B8
-:103DF000D113E36DF88261E16DEF417BE3FB957BCD
-:103E00001C221CB96E377C11B5AECDF54254313E43
-:103E10002B45A207FAFB2B7B73E10BE887FADD4801
-:103E2000FDCC21FB2B6CB2AF9A0B1F813CD9637781
-:103E300073FC81ECCF7004DF9CDB1FD5F705E7EA4C
-:103E4000F2201A0FD1F2E1AB28F960BC2FD6B6BD33
-:103E50001FD52A17022C4FCB6C22003BA3EC430743
-:103E6000EB8FB2AD723D0A92A73D697D1CDFB2FFB8
-:103E70008F37C09F0DD952C671AF66F93BEF992FAE
-:103E8000785EB309FF315EC8DFEFECF07FD346897F
-:103E90006607F68B57FAECE0FBF3D6313D6F731DE6
-:103EA000AF5458BEFD57E52EE1DB0E7BEB62EB75A0
-:103EB000EE05E46EF20073DED019919D380495EEA4
-:103EC000E2AEBC7F10855F03AFD172F4E93C4F9B3B
-:103ED0007294FEFC5144E0518846E6E36F492E623D
-:103EE0001FAE62C3F7ACD708ADCD0EE2E38AE03770
-:103EF0000C2F835E63F8A52988579E3F6F333EA33E
-:103F0000EBDF03EFD3D08B9EB3B15D50562FF31C84
-:103F1000E93DF63B2A11AFE7D67507335222E1603F
-:103F2000141C8A6AEF8F828BA2DA6B517095A97D7F
-:103F3000D99EFDEC67D1B84DED1C8BAF613FE47CA1
-:103F4000BB22C878ADDCF18D3D00FEE8D46C875C07
-:103F5000B42D1181787ABFF94595EDDE539EE604C4
-:103F6000D829CB62A41D77CAADC349062C6616D3E7
-:103F7000384E05FABB9157D01C23E32DA78A9A131C
-:103F80009222FCF6A67A35C143ED1B83626CDB7985
-:103F900031B58CD74671A17A69CF8D517FD826F380
-:103FA00045ADC241FD35D67CB70DF1A4CFC97F82A6
-:103FB000FD5252737D02F65F4ED577FFD954F881DA
-:103FC000AFAA9CF325027E3BF226664B528A23223F
-:103FD000F0E0509A9F1A9F77F005F857C428D8FF51
-:103FE0002C591965DF88A2C430FCE9D5D1F90D41FF
-:103FF0003BEC9BB9A467218FE6AD35D72FA83FCE08
-:10400000EB6541D47AD1F4B871F47A596CAC179F4E
-:10401000F0E9F9969CD777EA90CAFCD5B2D42696F7
-:10402000A7C8BC5AE4A3B4D4CB7C9D963D1216011C
-:104030003D0F485FB706DE4E603DF5BEB0DD7262F3
-:10404000E7BFE7FF12FCB3EBE3FE8F507962D7873F
-:10405000BD5E00BCFB4F5D3E16E7B71FB5F7FB1911
-:104060003CAEBD0E81719DDAFB4A17D81BA79E7727
-:10407000703EC2A9250EB6D7037BE3396E71AAB391
-:10408000B4876B5FFCAE7F23EBE3A54CC72706D854
-:10409000A55D55FF37D68F2DF50E0FE651B9378E3A
-:1040A000D755E5F331BCAF76EAC5EFF223E371FFF4
-:1040B000D5F918FBF0A7E2C5D467C0BFBAFD5FF918
-:1040C000C2E0276AE02FEF78C93E1B79257FF88F81
-:1040D000FE90AFA79E7989E5EFD7B6C6C710DBDCA7
-:1040E000B6F3C0C3B674C4F5E8631D85B87297F51E
-:1040F00046AC9FF3F122F1708AF08079115EE6C13F
-:104100002EBF103E5EFEA7C5C73733A49C1B28B048
-:10411000EFD38A17C52F9FC773BC8AE62F9FEFFD89
-:10412000AE3FE4D0C5E6FB19E6DBFEFFCE7C95FC96
-:104130007FD6F94A7EBF678087C719CDF7E7F3F5C9
-:10414000EE9F33BC2DDECBE3BDC4F59E99FF7F8B84
-:10415000BF47FCD3CEF762F47E55A777BC1BFBA00C
-:10416000A75EFC8F2EE227CC7BC6FF523E37ECF9D0
-:1041700002D57BC847ED5F13A1F7BC996C95B46974
-:104180008FFC3ADF88A7487F6A14FEE541FB9CA5B7
-:1041900021AC07B227E0C7D4BA720EBC4DF02B6435
-:1041A00027A8BC2F2BE349AFA4F98232BE5B2510B0
-:1041B000CF2AF8D36C865FF75D7900792585AA8CC4
-:1041C000C7ECAFF16E68A079EC4FB2786A091EDDDA
-:1041D00069F6E7DBA9DEDD5175C33FABED94EBF487
-:1041E000448C6FB4CBEC675D13E5275DE531D78F69
-:1041F00015CFA460BF6E6CB64DE07C4E21DA47F857
-:1042000095F3F3DD3CCFAB44DD52B7EBA7E3E939DF
-:104210003DAF92F0C2FB36814EAA9E1767C69B0047
-:10422000DE5280975CB6DF03C27BE06D82ADBA7D63
-:1042300025F4FDC74267FC26F8D10E51100E127C02
-:10424000C663AD427BAB207F58CE93FDE868BC09C6
-:10425000DDAFB6EA2418DD69541878C6F3AE69A656
-:10426000F779DED178FEE978DDD76911F09A16EF9B
-:104270000D822F3A3D9B82386B2DE159515AF169DD
-:10428000E0291AEFBFA1B14A7F5DE2BB93D567C5B4
-:104290003A1BA6DBF3A3AD4912EED4A016F1FA0B3C
-:1042A0004ABEFE8BD70A7B64A42B89F349857ECE58
-:1042B00042D5F7C39161C7E320FF1479B913ADDA92
-:1042C000ABF99C8FEF1605F05B0B4408F15BA5FE84
-:1042D00095EFE11FE17C4911EF6B1EFC00706FA7A9
-:1042E0002B0C7F50ACB59E38672723EE1F75BE623E
-:1042F000C2A0ED2341AF598BE919E2586ECF41AC12
-:10430000C7E2FB1D1ED0AF93B581EBC9D772D70CA6
-:10431000C66E7588E1D812B2F4D3D1EE9591DC7EE9
-:1043200091702B4948B70B29805D6E99AF46CEEB53
-:10433000B780ED4BE33DB5326E22C04F3D5076C3A2
-:10434000F765FBB4D1F43DE4BB098DEDE5D81E1C47
-:104350000912DD9422DE7FEFDA5DE645342F73B07B
-:10436000BF537C77E75E904BE30ACC71EBA103650A
-:104370003CC7289F1A28E5886AF1A6E13BB396F668
-:1043800061FF4B8D2D2ADF093C6E8B633E2F5E7ED5
-:10439000D3F801F4FDE26DEDBC18E6B109DBF3657D
-:1043A000FB69B7BD4FCFB5CD31FCFCF581DAF7F92C
-:1043B000C833503C3376D28359D7EEB7A751175A3A
-:1043C00068E249C41D2704B6BF897DCE0953546EE7
-:1043D0003F41CFFF144BE378DF7C7CE01B6B1A7D01
-:1043E0006F3C3935A86F8A7177B985C65FACC79BBA
-:1043F0006D03E53A546385F68C0BE3EADCAB1B3DB9
-:104400001F2F643E74F4BA1DA9B7EF3ACAEB4901F5
-:104410007E9418F7FABCD6F6F80EBE7BA58E0FF781
-:1044200040B9EF6BC084578E8B97AC7034754F409A
-:10443000690BF7A6B27A7041CA40AA1FD74D14AED5
-:10444000C1776F57C57A1E6F7331C7D9E3B33CA0EC
-:104450008326EA38DF48ACEEC9FB394D2305F34F1C
-:10446000D3AA4C83DE9C9F64F8734D23BD0791BF94
-:10447000D53CD2E95DEF457E4B288C38CAE13572D8
-:10448000BFA66B6DB807E46CB34FEE837CB138D731
-:10449000033EB9F981C909909FB357AB6107F87D15
-:1044A000A5396F49B8BD9C373EBB6EA41DFE6B8914
-:1044B000CB6FC7BCAE1AA4790742FEEBE7222FC32D
-:1044C0009870EEA7AEF875F87D6A02AD67AC3FABA9
-:1044D00027017E7574DE53A59EDF64C0CB52B5C143
-:1044E000F8DEAC44CF363E5FB9B83BC7556F1F28E6
-:1044F000E5AFB0867B003F8FD15AC0FA3C912FF9CF
-:104500006F5CB2BB978BF93746605E4D36772FF004
-:1045100073D3B2180BF0346E89E4E37BAC727D0583
-:10452000FD1E4B80DE8FD1F9777A8DB5681DF5D3EE
-:10453000C929ACF1C9C85BD3DC18C7F840CD61F814
-:10454000D7B3757D357BA53C3FD67594A4ABB0360B
-:104550008C6E47CF8F6CCCCC415EBCC137F5830BE2
-:104560008A0646D07F5C81BFB03D7D679CC5D30283
-:10457000395C324579A9BBE4836B07B23F5FCFEB6F
-:10458000BC85E4842309E7061B248C7C55C88DBABE
-:1045900087FCCE08BFDD2E7670BDBD44E6A376B5A0
-:1045A000876B38FFEA16E15E42F026B223AC362173
-:1045B00036573BB97CBA9AE45D4F21B654A731BC5B
-:1045C000ADDAC365A83A8B9F3F53ED657847F52078
-:1045D000867755FB19DE533D96CBE7AB8BF879B464
-:1045E000FC99ED9AC3F2C4DD8B683DF87CBE99E17D
-:1045F000A17141FE3885FB6EE4D30A29EF92B2A483
-:10460000FC11BA3CEAD647F0F99BDB410FC2BB6D07
-:10461000C5480B9FF7B436A683EFC6A827B6EE466B
-:10462000BC639E8BF3B25A4423AF931661F106F23A
-:10463000A4FC7110DF75BD6B6C66649EFA8DF3147B
-:10464000618DE0AF9BAA628435423FCD5C9C648261
-:10465000A72F7EF7E50EF4FD3EDDB47B41FFC37767
-:104660007DF9E89FE8F9E3771DEB29CFF5FEB02E41
-:1046700032EED2229A256C75F27EFCE377A4A7B6BF
-:10468000EB26BF077ACDC23F3CA04FF3D127B10E36
-:1046900097A9DE25047F04FA103E3FD1E953BCAC54
-:1046A000FBF25F605DFB9D5E85BE73F88EBE858309
-:1046B000A8FDE3FA7E945841788DD43369527F7D0A
-:1046C0000AFD9524F55901E46858EAAD4F7F951A23
-:1046D000B81BF5B724787102425BD1213097E09581
-:1046E0003EBB57455CAF5E2C47DC86702CED8A8064
-:1046F000CDACC71A3B25211E6C9C938ECB0B3AF98F
-:104700009C167584FD985959FB443AE4529DE2C6C3
-:104710007E0DCE753A9321DF14DE1F451ED014D2D4
-:1047200097CF0E54797D9DCAB772790D92E508AF87
-:1047300031C2CBF1999295D41EF2B1CE679F13216D
-:104740007F67E9CF676759B8349EEFD3BFD77185CC
-:104750006F2AF8A323EAB351E64CC5F83ABA0AAD7A
-:104760004AC4FE6FFD402BF7772A5FF67B0D884A1F
-:10477000EFDF9BD5CD7E73369FCF62BD65F4332BC3
-:104780002B677937E8EB9523811D516BF3A6A55074
-:10479000BB97075AF579E8E7C29D323FBBEC027A36
-:1047A000C388D31DC13FE539499EEF826DBFDB86CB
-:1047B00073120B3E76B0FE5A70B9D44B223B983F31
-:1047C00099039AE6B8F8E8DF9D3C78378DE724CE68
-:1047D0003121DEBFE3333BF24369D95425A60356AA
-:1047E0009B90671A1D9F3DB0EDE38436E3E23BD416
-:1047F0004B8B8B2B3F24402F18F319F3E29954D89D
-:104800005995CA59DE67AA7C9124751BF38E8E8B4D
-:104810009F8B9F8B95DFA88833DF79A4CDF87974BF
-:104820001CF0FB81D1FB11AE02C8893387D420F67E
-:10483000D35B823D13451BFD1BF1F3CA35F4523B9C
-:10484000AC4B4F22F6C34E5DC02E1F3E48FA2F27B9
-:10485000F578FBA92D2AFB4BA7B6C407619F566CC0
-:10486000B9FF20F6292B36286C9E978B06C617E1D8
-:10487000513823F518F2DDDAC1B8F624425E19E3A7
-:104880002BFD5D7C15F86A7E48F16FA471B4383D4C
-:1048900089ED23C6D17190E4CF5247289FF1AA8FAA
-:1048A000DB3D48CA41A3DDFCFAFB392E4DEDBE6667
-:1048B0007BE7F77182F30445F39B18DFF1B5B95E2E
-:1048C000EC2BCE0F6DAFE0FC8E2D716EC4218EE906
-:1048D00079CEC6777AE9FDF51A24ED94E3FAFEDD88
-:1048E000F16DF27C3AC689F5744C31E70B66EBEF5B
-:1048F00065EBF87A475FC746FBF9A1A6841ED4FE94
-:10490000AB3DEF72993F48AE97F9AE86FED0BB5FE4
-:10491000ED88E3FDF8AF763C528838F3C9D0C8146F
-:10492000F0FF397F6D904DD261AD3A16F812419982
-:1049300067530EBCE6468EB3DDBA4066E43A93F99F
-:1049400046C7773C9B60C96EA563B9B3CA89F3A11A
-:10495000953B6E29021F1FB4497CDA774C0CE0D8D6
-:104960007365BD4F807F799DA573FB159688760E84
-:104970009B97ED62DB9E623FDA1B71E8853B6D7CA5
-:10498000BE70C6E59EEB6FC43A7CCDC67458D8C7DE
-:10499000733DE72335A89CBFBC305384617F2CBA9C
-:1049A0003D7E1DF6C38CF1CEC895EBBD6C8522FC17
-:1049B00034AFB2A02A342A3B12DD03C8514A6B1C23
-:1049C00080FCC9A6CCE03DBD52F8BC6F787D4A6B37
-:1049D0009E29ADE35E3817593E2899E7FDE0B442C1
-:1049E000D67787ED2200B9107846E6E1947593F901
-:1049F000D10F83EFD15F72B8573B9AEF099DAE6537
-:104A000093C2BD909751F64C3AE7659CB0CBFD52EE
-:104A10003CC77E71590EBD4FED52F47C5EBC9F14B5
-:104A2000C14765B3BC1EB45393BD1E9F0BE3757F96
-:104A3000CD76EBCE7801BBD5B23B5ECFAF8AE13C01
-:104A400072E3BD9A41D22E4ED1E9296E90F9980FAA
-:104A5000DA64BEEA831BD3F97E0CA3FD83366D1A9C
-:104A6000EC27CC03F6FA7C7B5D2FECBB18E39D9F13
-:104A700050C7E33CA1F3F9FCD83A9917AE9F3B46E7
-:104A80007BC04D7A1E7BF3530ECE5F3996DEF02D40
-:104A9000C67BECA93EC88101BEE7ECE17AB21F8972
-:104AA0009E0B9E7684517FF42919B73E6A0B7E0BCC
-:104AB000397CF4D1767C3EEA68FB603EE707286EDD
-:104AC0000BECB3A38A0EDBDC6C5776B5134CED53BD
-:104AD000628505F93B6327AD9981FC86960D0EB082
-:104AE000A738B6E9A154F66B842791F36C0EA9029E
-:104AF000743BF6F4DFFA44DA2F46B9608339EFAE3F
-:104B00002953DA9546FD3A7D5DAED3D7F5C64152BD
-:104B10004F95C7851EECC6F393F826FAB07F470A77
-:104B20003E9EF327B6F65420371E16C19F7F9CC7C2
-:104B30005EB60779F365CF3CF526F66B8F594403D3
-:104B4000EC0FE5AECD3FC7FD1C29BF49643D24C431
-:104B5000069EDF51B73CD74A0B96E73FBF838417C9
-:104B60004CDEDC0BF041D2390AADAF051685FB5F98
-:104B7000B0AB1FE7DB113D2CBC4FB65DD5C743364C
-:104B800025F0B749E62B8F4B0E6E82BDD7FC6877B8
-:104B900081F3EE63D4B5FD41BFD31BE22CE0A7F255
-:104BA000BB87240E01DEDE5205EC8FD3566F87C81B
-:104BB000384234BEA2F3C0BFD5E55319AD3B9CFFCC
-:104BC0002CDDF528DF2F520ABE045E9E56781FBBEF
-:104BD00074F99087984FDFB4899ED4EF89D0FD098E
-:104BE00091F469D4E5E2B9EFD8BDDCBE94DACBF735
-:104BF0005F4BE0716EB2715E4B345D2FF9FDA7D54E
-:104C00004B7AFFDCFC436417F43F1F0FA745C3CF6B
-:104C10003FA6EFFF654B0CFB83E401F039B6E3B62A
-:104C2000D01CCCFBF8D618965FC793A49CF88AE4F6
-:104C300069A037C671CD6F994FDF99CCE7FDE606C5
-:104C4000CDDF35FAFD02721C7CD7CE9B08BFB3FCCA
-:104C50002D290F895E3FE3F7DFB2F1FBD1F338A0D6
-:104C6000BF776E9D6E8D63BE38DE51D2E3F8B6DE3F
-:104C7000AC9F9A92DC82F9E6299BACB785BAC00E4C
-:104C80003EBEB5B7AF36E2BBC793425DDC11CF9BEA
-:104C90006CC1E503A53C6D865F2CC2246AF3915F6D
-:104CA0002458CE1BEF953A5736C04E417E6F7E0E8C
-:104CB000976147F2F979BAE392A53F396CB08C0F4E
-:104CC00070CE6AAA9E4FCE764FC80E39AEE9F66115
-:104CD000D996E83C5F59DFC9789FD65D8A91576CB9
-:104CE000C17843F6348E3708CF3334DED2A5B7CC43
-:104CF00047FE7869D5AA1B613F955AC5583B8DABD5
-:104D00004951791C4D3162E624D89191FD44D86F08
-:104D1000BD079F8BD30A772ADBAD6CDCF71D2CF522
-:104D20001DE03AFA5ED9526525BE6FC8170E14A66B
-:104D3000B6E20979ADC8EF691AA9D75F60DE4D36D2
-:104D4000591F3D6F633C23064B39D594E9F9ED506B
-:104D5000D0E50D95CF779DFE213731B90D3BAD558F
-:104D6000DFDB5BF36C69FCE3605BD377DC83A5BCC2
-:104D70002BA5F1619CBDD69AF3CAB33698E1CBB6A8
-:104D800098E1EC1D66B87FBD19F61E30C3797ABF75
-:104D9000F0B3716E197E364AF8D91E87F4B301C399
-:104DA000CF46093F1BCFE16703869F0D187E366013
-:104DB00003DFF0B701C3DF46FDAF743C097F381550
-:104DC000F99A151699E74BF4F0F339A66976D3B939
-:104DD00094532FCA7329C40F52DECF77F13A791852
-:104DE0002D06432FC9F594F2BC23B884DE1BE1D114
-:104DF000E60EC67A5DF3CD1CF05D45B746CE7B6D01
-:104E00005AF64AAFFBA95DA3122F605754ACF9665E
-:104E100006ECA8248F568EF695B10DCB0772DC3EBA
-:104E2000CCF2A3B1C6F3D60849478EBF14ABB8295C
-:104E300083EAE725B7993F149D772E569AF3CC2F36
-:104E400096771ECD07861DF8B8AD39DDCD7EFAD038
-:104E5000C710E75DA8C4BBE1A77F162396E0FEA0BC
-:104E6000C0AB324FADE5904DE60DAC54D68B08FB90
-:104E7000E4D73ABE0D78F6D95CB6C7CFC12B158BF7
-:104E8000B85C881E5A7313FCEBD3F32C6C779F9E8F
-:104E90005750D81EF61FF9655813B89F2B72BCB82F
-:104EA0009F2B927F703F97F9DC4447537BDCCF65A3
-:104EB0003E377199A97EF2CA5C537D49D110537D6A
-:104EC0000F21C7B768BE1C5F09E9077F3BC04B389D
-:104ED0006F71116847764A1725B09CE5F23A85CF85
-:104EE0008D7B16AF28045E4E103B238E60F0CD6C98
-:104EF0005DBF086BC00EBE3B9322EB8F2A0D5FDEB9
-:104F00004DEF9DF4D56DC2D529272D6B1F1CEA41AD
-:104F10007EFDBA2E6E5A87B72AA154889E3579DA5B
-:104F2000AEC1ED919FD23891F713B7B74FAE81DD87
-:104F30007968C09B83D0DF1695F3260C7EE96293D7
-:104F400071BA75838866644FACAB93F9BCEBEADA4F
-:104F5000C5F688D87F31E6D9023A08944B525338C7
-:104F60002E241A300FB2DB97C06E3B7D48DAEDC6B7
-:104F70007C7A2C0D775A44F5B76E8F61FC7CAEFBC2
-:104F80000D27FABCD4DF83F31BD57BBAA8B0072C5E
-:104F90005B36C18F70A4686F82EFE7ADEBF927DC59
-:104FA000EFB5E07D55E03CCD17AB47250CA6EF1CD7
-:104FB000DB6AF38E23F8EEBA27ECF093175883766A
-:104FC000CEC37C6A9D1D79C9576E5EC7CFE76C2E34
-:104FD000E6BCCBB9A28AFDC823FAB92C63DEF30A7A
-:104FE00094B56EE22FEF15920FE7C5CAFD3CE2E7DC
-:104FF0009731AFD39B151FECC72945DBEDC5D0CF4B
-:105000003ABF7AA64E1D03FE6B09C9FB395A5E579B
-:10501000E5BD63535499177381FB7C269FCD64FED5
-:105020009E72B62FFB59D786FB483F365BCA8F96D8
-:105030007A95F7E35A5EDF9F3219DFABB7F1EEDD09
-:105040003C7B833CFF6F11553847E099DA20F92A01
-:105050005354C1FE5BF4C6BB07B1EE16653A3D582A
-:105060000F454355137F568E8E33F1EF54916C3AB2
-:1050700047731D924A22E029E3BA9BDA5F3FA56F8E
-:10508000943CC869AD67797045D439C002135C4E51
-:10509000E59D904FE26AD37BE562526B3BF8C31B00
-:1050A000A4DD5ABE23693DF6C5E759A43F345593A4
-:1050B000CF2BF6C8E742C49E3B978EF3F8880F9833
-:1050C000CE6DEBFB7CE897E381DD1B38AED39C4EC5
-:1050D000F292305A9ED568473C8DCCE566C449CBE8
-:1050E0000304A35FBF68AEC5F911ABC4AFCBEBEE51
-:1050F000B624BD952F2A7698F3AD2A0EBDCBED8C44
-:105100007CC6E87AB2D39777C4B8C7293E3E37B990
-:10511000A5C98E78D014AD13DF4B117D5F5A59A805
-:1051200089C779ED9E5437F66D2BA2EE495B7885E1
-:1051300047EA273DFE8F7B86A49DD06097715BD7A1
-:105140003E0BAF3F792FCF39BE9C6791F70544E105
-:10515000659CEF7DEEAF63BACC43035EAC117889FA
-:10516000E623E0C91A81A73942E2690E499320C1BA
-:105170001DC16791F8F989F89A8B7F50FDDC3D4A93
-:1051800010F96FD1F899A33532FEE668AEAAA0FBFC
-:10519000FCF954DCF9C141C8A76DE9F25EC368FCB3
-:1051A000CD150DCBE1F7CE25BD114E62BEB03BD97A
-:1051B0004F53BCD0DB9E418D769B94671CE76D7985
-:1051C000FD5D5E772D5E5AD5E00B41F5D4DEE5F747
-:1051D000342F6923CF77D259193FB9EEAC95CB293B
-:1051E000E3CCEBEEDAB3A9FCFCA7E2A50278069FBC
-:1051F00023AE97D0C63D7B88F3259C3F5F633FC4B9
-:1052000090C3AD769D396FF942F65F749CF0AE2B7A
-:10521000F47CC1016280296FF902764774DEB2A185
-:10522000C75B5C524F8E51B3DFF2D0BC8B5F55D958
-:105230004FF74C1D6BE1F3E3AFCAFBF1B465679A1E
-:10524000C09F5ABC85E5E0C2F86E7CAF85A6C7ED6D
-:105250008C7EBAD4B44B45FCAF38C6CDF9F8C53511
-:105260006A11F45731B5F344B45BBEB47B17E885DB
-:105270004FEFE9FD5880D6CBA7B7A7A422EEFFD900
-:10528000325B0A49CE73ED3E5D36A60BF2333E5BD0
-:10529000E5981A6C033F9B747D517ED707ACB74EDF
-:1052A0005A5E4F984AEF972DDB9980B4FFD265EF95
-:1052B000E6BBC9A4B8224FDB7805EFAFAEDBE4064E
-:1052C000BEDCEBF83E815D242EF17EF1B2654CF739
-:1052D000058ADCAFBE55097F3982DA9D8859953041
-:1052E0003513B7A10ACED338B3215E3F8F56C379A9
-:1052F000432762C91EA0F64762243E8F6C8FF7F2E7
-:105300009D18DE4017F6DFDACBFD9D524BFD751878
-:10531000CF5529DAAE2B06601CC14D692AB7E3735D
-:10532000EB5A4DCFC4B6E21FE7E6A9EB69D8DB28FC
-:10533000616F235F06F63660D8DB28616FE379E59D
-:105340001AB3FDD6A0EF171AF1E0AEB5CD3ED8BB2B
-:1053500081029155C57A765CC1BF426FBD2AED8549
-:10536000458A774523DB4BF175F03B6BADD2CE0E12
-:105370007C22CF45D19F2CC8A75FA89779B19FFF0A
-:1053800050DC5D8FA3FD62EC0FE5E1DE53B2BD2280
-:10539000F875C459A7883C773B928CB04878943311
-:1053A000DDD47E8C3BD3547F655A1F53FD551E9F21
-:1053B00009BE266BB0A9FD78EF4813FCB34157999D
-:1053C000DA4FF44F34C193C74E33B5BFB6A8D854A3
-:1053D0007FFDD4F9A6FA69DA2D26F8C679B79BDAEB
-:1053E000DF545563AA17A2EA49E0C71F90F7B0D56A
-:1053F000C37F72E0FE17279754FF7BE4318F24515F
-:10540000CFF7AEBC71DBE380F721AF9956DCD0510A
-:1054100096AAB6E2F8B62132AEA80DF5FF7805FBE4
-:10542000B90D7C8F2662B7E0BB94211EDDCF96CFED
-:105430003B598DB855433ADF9710D5FE42ED86C6ED
-:10544000ED3BED2196BBF385C76EB20E461EC4BE82
-:10545000DCEE04EF1DD2749395E4CDD021FB9EEDDC
-:1054600046F0C117FACC60F8F27DA7513FA5FE0BBC
-:10547000593F59B069D230E4DE9B02C47743477488
-:105480005BE995719136CFB71B25F08473E1C013AA
-:10549000CA30F13DCA7DC4F7280F10DF97905C3BFE
-:1054A000487C8FF210F99978FE6FE467A27C9DFC2E
-:1054B0004C946F927F89B281FC4B94EF544FE5F28C
-:1054C000BD6A8DDFFB63F53C2E3FA8AEE2E71F55BA
-:1054D0002FE6F293EA003FBF7C888C23B848EF4068
-:1054E000BF57200F06F902D1F72C57B9F9FE835A9E
-:1054F0005D6F897A3DAF661FF9AFC067A335E94B91
-:1055000067EBFEE285FD7DABF832C26E9B68F50F5E
-:1055100019C2F4EDE4E6FD21FDF90B5ECD3F84E810
-:10552000FB7EE6E49EB92AF45DD5CB8954F7BEA58F
-:10553000EDFB2753747EF10DF58FC17BC39C8779FA
-:105540003FDD934ED6EA108615D05FC991F1CB614D
-:10555000D6865AD4D77E2F3CF09B5F8AFF23EF83F9
-:10556000D792B98CF3C7CA59E9AF0CD7F7EF6BBF25
-:1055700097FBF7C33176AA1FE696F5B53793A6F3E6
-:10558000A13EC4DF1F8ED3CEF27C9B296F67F4D976
-:1055900086515CEFB27B906F3ADC1996DF730A3765
-:1055A000E2CB2FC5EF92FD8F91FD6FF83ECCDF87E8
-:1055B000F7691B8CF1B78E67098FAF41DE4F972DCE
-:1055C000DBD7EAED876BD47F12C65725C7574CED62
-:1055D000E5F859CE0DC73793E06DCBFAD834793E54
-:1055E00079F459BDDE2BE7DBC12A619C29417D4658
-:1055F0003B4DF8A9BF8C0CE145FC6D784A433AB7A6
-:10560000D7F319E2ADF27B895E791F578FBF6A72BB
-:105610003F801080F11B7949C6BAED9C1C4E879DD6
-:10562000D779A19DBF97A16EF7415EE7F8B400E876
-:1056300067755A787EB57E795EFEED173D9D711FC8
-:10564000E944DD5EFF07F45F26E9BF57D21F97BC30
-:1056500065B4C2CA1CFA6F709BF497F8227EC1FC35
-:1056600089FE4C0FD053A7BF62E047A7FF397A2DC0
-:1056700089ACD7F9E37CFA8724BD757E1AEE94795C
-:1056800013680FFA0FB34A7EA88D91F91E2FC51724
-:105690003E8C7BB208374588CF0F33F8A54A9E1F52
-:1056A000FEDF4AFF3CABBC47CE51E6E47BEA2EC6A8
-:1056B0000F339B4521EEE93CEBD35220278ACF7A6A
-:1056C0000E029E2D4616C23C37EA959CB6EBB5BF3E
-:1056D00034DB001BCFB3D06E406BBDD5F94E1CE45C
-:1056E0009EF11DA3DD95E7B5CB71425F2C1A135ACD
-:1056F0000BFD35B6C6CA716BB24C183E44FA4CE687
-:1057000073FA137CA991F99FDE030BF370BFA83CD9
-:10571000BF255CD2AEF6D05FC8D5C21F8A96A23F25
-:10572000A16EB1C2EF38837C5AFA4E618AD93E1F0E
-:105730001BB5BF7E75F6576C8F5F7D917BAE8F0C6E
-:10574000D1F7DD3345E67FF29ED1E621AC672FED40
-:105750009ED12C51CF7C30BA58E673D1FC2D3988BC
-:10576000DBF84515E0425165051F8C157556E95764
-:10577000FA4F54E4B1D7CEF8B94684F9F9785228F3
-:1057800050263F23F601BC3F6EC274DC1F3C2A77D3
-:10579000540F3C8FB83FCF36B43DDF9FF76777C4D7
-:1057A000FD79FB46CBF5B6F05A196FDAE7ECDEA6C9
-:1057B0001DFA2AE9DB1E3D8117C1E5CBA48F7BD002
-:1057C000BC5F217D0CF8EAAC1A81F70A3DE6BC23E8
-:1057D000E3FD6BDCA384B5DD85F5DD35FD9FEB04D2
-:1057E0003CBF96D47B34E8F55AD2C0D188C7BF9667
-:1057F000D4C1224B879DCB7EBB7BB4353E637DB449
-:10580000F657C8FD19F7058F6E2FEF0B8EC6EBD537
-:105810002264C2EF381DBF3F01AFDEB6F09A82C3EB
-:105820008EED81CF77771979538827F758DAC0F052
-:10583000AD36B90ECA778F2F405EF4C2F7657EC7CA
-:10584000510C057A77F1101EFFF0C583853597F767
-:10585000A302C0779953E2F164E0A5FEB8D73CDC1F
-:105860004E1B89FEBF5AABF279FB93CFC4703CEE5E
-:1058700048F0D904E0D3E0E332D5B3D28B75F89A7F
-:105880002AEF59FA617F17DC437A21BE267EBE7A61
-:10589000685BFCEC227EEE773E3F8B0DF21E83327E
-:1058A00067619B7436FCCEA41C3FCB1FB708DF0298
-:1058B000FEAF10D23FAA70BE2EEFA92418E75EA358
-:1058C000EDAAFC586A4FF576A7CC1736E89DE19013
-:1058D000F75866C40937E22042CBBD0CE3FDB4BBE8
-:1058E000BF187821BF764B64DEDAF0705FDE771E7A
-:1058F0007B48E57CF75762E5BDEF8D440F85ECD31F
-:105900002BFB56B9BA111DE7E66B65785FA83FA877
-:10591000E8F7F59E8A68C7F1F35C17FBD93FD15FC2
-:10592000BF75A8EEAFF717FDFFE1EF29B497F70EAB
-:105930002F7C353788712FAC21AD96C2BF8BC1F754
-:10594000C4D5C23FCF6C953BC3452FFEBD8C5129BA
-:1059500036CE33FFDFF67B0A1942E3F5F79FFD5D94
-:1059600085B1F2D179BFAB9091B0E28096D2FABB0B
-:105970001AD1BFAB90A1DF672D3C527F18BFA73073
-:1059800042F8392F7F4C9A59AF8C728F3CE0E6D2A7
-:105990001CEFC9B8483ED7B34375BD7231BA970BF7
-:1059A0009DEEF25C27F840FF7D9420F8D3F87D143B
-:1059B00083EEC6EFA4D4B697BF93F2CFF6BB28D13F
-:1059C000F489FE9D9468FA44FF6ECA702D96F134F6
-:1059D000AACCC57C6DD0692AFD657B00E77295FF76
-:1059E0007E7A1D8DA2D719B17200EE293D552CE5A6
-:1059F000FA85F4FF06AFFF14E4C58F8827E1BC8B5E
-:105A000053C643FCB55611335CE07E42CE97FD454C
-:105A1000ADBC07AAD62AE30101A22BEEC5FB2EF6E8
-:105A2000EFF23E47B28F6C1D1197A9E2F70376A7FC
-:105A3000BBD60B7A27309F2C5E2CCF031FB6D4F138
-:105A4000EF5DCCCCAE52B07F792C535386B547BCBA
-:105A5000B868FB1C8ECB570D847C9FF1074717D489
-:105A6000CFE82AEF8F14D98D0322ED911919322F27
-:105A70002B66982EC7BD320FCB354CFA09F15E3735
-:105A80009F6B28CE167A7EABE832A31FF8F813B6C8
-:105A9000E35B3CD2AE6EB4C97B2C03AFCA7C9EB52F
-:105AA00055EFB0DDBF91EC5A55DA376BEEE3384372
-:105AB00082C03EEEE331CD49187FEF35C2642FF44A
-:105AC000093A4D79C97D37BB4D70BF509AA9FDE5A4
-:105AD0007B3CA67A5F38CB549F7BC86B8207340C23
-:105AE00032B51FF881DF040F6E1C6B6A3FE44891EA
-:105AF000091E3DAC9B8CFB8327693E3316B983F2AC
-:105B00001E7D1927E96A97F654EDEDD29F30F2D742
-:105B1000357D1D44E7AF77B6CAFC757B95D46B9A8B
-:105B20004BFAB7EE64E156F95C4C03C3B81B82F341
-:105B3000C603E63CF34E4EE95F59464BFFC3AEE762
-:105B400099C766C9732F465E39F9157EE0BB876831
-:105B50009CC6BF77A0DF271ACDCF453ADDA3C7DDAE
-:105B6000D52ECFD3D5DE6EE7FD73CD656F5212CE45
-:105B70001FCFED0325FF6F74B67DEFD38C61328E9E
-:105B800012CA2DBA6E18B57B8CD416DB5FE7F5E729
-:105B90006D84BCABFD959DF3C62FD6DF8CCBE57C29
-:105BA000A65B2C332766B33FC8E7008D7E2BF47EBF
-:105BB000278D50DA9CDF8CC466BE774D24DA3DE039
-:105BC0005FCDB59C6177AC4852DBC07BEBB90C99DB
-:105BD000A77FD3CAD07DBD699CD3ED753679E140EE
-:105BE000D0067E18574076A40FF1D782475D448FC8
-:105BF000C7165B390E76DB8B2FCEC0D5F4E3453369
-:105C0000F3031251B09F08FB53CD691DF7B1E13288
-:105C1000EFFB415C2CCDF6CC0F3CAE163D3ED222C4
-:105C200042E7CE4F04DAE037CD7590CF21B8174A5E
-:105C30007EEA1C71CE0AFEE7FFD47909811D52EA83
-:105C4000C75627E439C78BE0CF38A7E2B9C556B4A9
-:105C5000DE85F32262AC128187FF182EE3FC878673
-:105C6000497AA31DE4D185DA91DD9788FD8516E197
-:105C700049745F24AEFE3F31FF0CAB8C337471CAA4
-:105C8000F3229DAD1ACB0B7B967ECFDD79FCAECB9C
-:105C90000D3D4ED6C92AD77D27AF5CD7E7CB85030C
-:105CA000FC7DBB26EF4D8BC62FFF8988AB18E757CD
-:105CB00062474B3962C88573E7507A4A3FD4A6CB16
-:105CC00087600F0BE71DDC1D6F5EC7DFEBF261AD78
-:105CD000A12F02E4C7E79BE484C0BE5EED3295E5E8
-:105CE00004C9C9831A8DB318F7B2B85B7F1FEEE6FB
-:105CF00007A41E1BEE2F7A10FB26B356DBC43ADE38
-:105D00005790F7C3CED5E3E4C581A8FB59747BFC5B
-:105D1000CC4AC58DDF8D98BDC25C3FD7F5E527F035
-:105D20001F6F8EBEA7C6D8AFBB481CE0E830DD4E63
-:105D3000F70AAF9E7FBF04E33B1394F75E9F3BAF30
-:105D4000A4C77F5A82CF4AF84E21227F47C2B00BA8
-:105D50000CD8837DB2887B5808BFB159D0EF4BADCA
-:105D60006DE6371AF83D97E7A1EFD351B96419FBF7
-:105D70003332BF81E401EFCB9DA07AD8812702A7FF
-:105D8000B9FD891D319C5772D2D7D01FFBB7C63ED3
-:105D90005D0F4DEE63B5EC8897F90D2E8B8437CBF4
-:105DA0007BEC17FC35D81F7E6C63E059D33907AD07
-:105DB000D1BCCF175D6A353BD9DFBC224F4B1E8E5D
-:105DC000BC74ABD7E925F81ED73EBEA76B1CF98F74
-:105DD000906BC84B599622C7CFF22B705AE2AF4A4C
-:105DE000E2EF6764E8417EBE2F487A228E29C8AB75
-:105DF000A5B2383C98FBFFA9FB6093CFFAE4FEEF15
-:105E0000D921FCBEB66230C359C1E6911F50BFD73D
-:105E1000692E0FE248D7D6FE624C2C7DBAF15F5D49
-:105E2000CBB8EC6C3E3F6094BEE1528F34DADAAE10
-:105E30005FAFCB9F3F0C17FA7D3592DF17D628BC9A
-:105E4000AFB6103C0EF83E793FA7019FAED3E131CB
-:105E5000125EB44CC2504DB08367E9BF93B6498F10
-:105E6000BF60FE28317FC405B6E8F119CC1F25E6D6
-:105E70008FE790578021AF00435E0186BC420979CD
-:105E800085E75F248DE27D6DECDB8D8E584FD8B7B2
-:105E90001B1DB13EB06F170963DF2EB23DF6ED2238
-:105EA000EBB16F17598F7DBB4818FB7691EDB16F41
-:105EB00017098B4157B5C2906BFE89267832F903DA
-:105EC000A323D633F6ED22BF8F7D3BD3F7B45B4CD3
-:105ED000EFDF28169BDEC7BE5D64FB998B15D3BE32
-:105EE0009E10CDACD767AF69C77C94E12BAA04BFE5
-:105EF000FF39EEEFB7D9BAB17CE038C6C2F258AF7D
-:105F0000A477DD58497F8B3C1FA134F3EF0B9CBE77
-:105F1000D32EE131E6FC6DA3C4BED7689BDCF7420B
-:105F2000897D2F94D8F742897DAFD13DE5BE174AD0
-:105F3000EC7BE139F6BD5062DF0B25F6BD5062DF28
-:105F40000B25F6BD5062DF0BEF61DF0B25F6BDF0D0
-:105F50001CFB5E28B1EF85E787691C2511720CF6E2
-:105F60007A0F939F497C68F233DD2618F67A647BBA
-:105F7000D8EB91F5B0D723EB61AF47C2B0D723DBA5
-:105F8000C35E8F8443C33CBCDE60B747BE07BB3DE6
-:105F900012EE57177819B1B5F16BBF3E80B2315E82
-:105FA000790CE70D43C3A7CCC47E66638CD22589E8
-:105FB00064BAAD66DACCD1B0C3F5FCC7FEA2D90293
-:105FC000F9A3C199CCE373869C57DAEFFB74AE6FEB
-:105FD00030CEC5E10FD1DDB743F0EFCE18FBEDC6F3
-:105FE000FB5E52DBFC7B517AFB56B8ED76D1FD1B94
-:105FF000ED38B72A621C38D18CBC19DF9DAE1CF875
-:10600000219B2C0AE7996C5A22F3A2A3F9EA0B5DB3
-:106010003E6DB26CDF877330CDC58A17E73E7AD408
-:10602000697CCEACDF7461517DADF3E9FD7802E7A8
-:10603000D5BEA1CB3D63FC467C94E4059F1F1CDAD2
-:10604000DC302A91DA6B8191FC3B38E3ECD26E2094
-:106050003FF40AF8937D038A7F7D049FFF69B8D4DB
-:106060006F5A408EE3C9C727C8F762E57B4F3E9E53
-:10607000C0FD4F58AA709ED9D02DC28F73CA8DFA19
-:10608000F8FB6E09ABE8AF78A9ECCFF86EF1DA2E29
-:10609000769CE736F0552C1A47E33E6991A7E04E0F
-:1060A00059D1CBAAB15DDA61BADB023BE852CF41EC
-:1060B0000DCB4B1A833C44512FF8DED0F1796F9B06
-:1060C000E6CBE8CAC7EFA00AF60DB5C02D16F43B23
-:1060D0008110D00EF16482311F4D13559984DFEB8E
-:1060E000A61633BEB3A60B05F8EE337D9D2585DEDF
-:1060F000EBABBD6481BDD6AFAE914B631EDEA14953
-:106100002AE07136F7188C7FDC1885E547741E0F7E
-:10611000EC038697DA589F1BF6C3C2F873793E7F6B
-:10612000429ECFE94336CEF339BDF40CD717EF8C3E
-:10613000E1BC1E6D8DC272CDB01B8CBC9DB25BDE0E
-:10614000CF077E8E6506372575673D9F3802F93487
-:10615000DDB627E008CE89A53BAFC3D1BDD34B77D1
-:10616000CADFABD5F7778CDF3D15D97ECE0733EC90
-:1061700040A1D6DB23F7718CDF4F23F9C9ED4EEF39
-:10618000B1BBF9F7EBF4DF3B35E23EC56FE41E042B
-:106190005E8B1F95BF7F366BC5AAC2A904CFF13BAA
-:1061A000C3F85DACE87CACF95176E0C57EEFB4CFC6
-:1061B000083DFED36AFF31BF9C795DDA7FC56FEC85
-:1061C000BF56DA2B36CEFB9F5E23E37562BBE0FB46
-:1061D0008FA6D78CB2E01EE9E93BFD5EC5D36A0706
-:1061E000BEA5DB2D93CE66307EDFD5ED946B917F1F
-:1061F0004AF81DD718A3E7ABA57379FD59998F3AD3
-:10620000C925D77BE37382EDE9968043E611D60B6F
-:106210003DBFD5CC773E41FC41F4B9CCAFEC47DA79
-:10622000F278D83DF4BDA9B083DA818F8B97215FD6
-:1062300096DE66BB339A8F2759C353F0FD495E1B28
-:10624000F3D73FE263DCCB714E2E89AA9771CE5F04
-:106250006C90BFE3305593FCDD57E7EF19717AFC82
-:10626000C925E34BE7E2011824626681AD33912F23
-:106270003C03C90B1D795A7EE4EBC567CBFAD97F85
-:10628000D83A73299C990BC425D43BEC7C7FB5E6A6
-:1062900072F2EFD05C284E80F800E4E34DB7FAECE0
-:1062A000B322E463C1C882D5FE0111E71DEF9179E5
-:1062B000500BEFE9D9A1ADF3B646399BF08BF53120
-:1062C00023B1F1369C37AF1921FCA307C9DF99E44C
-:1062D00079E1C44D167E6F52C25B47BCFFE715D90A
-:1062E0008C0F867F35E28599C8872977361682DD3F
-:1062F0002AB3ABC622EFBA550E69FE8C4CC8215F9B
-:1063000018BF1B76A1B8C3D611920ED1F187D9D987
-:10631000523E0BFDBEF04FEFD9BD0DF2DC18FFA7CA
-:1063200017F87D8C8D232CFFADE73CA2CF777CD076
-:10633000477B6804E21A167F13F2E83BAA757AFEDF
-:10634000ACBCD7C3A06F4CDD771CEF28D1EFC327BF
-:1063500079C2FEE42CBFD35B0339922596E3BCD00F
-:106360000C5534F3BEF1797497787C7CDA5FE723BF
-:106370001FF7F15FC5CAF33A3AFEA6DB1B5E7666ED
-:10638000B6E2EFE3C5FF6293F22BDC13FB723754E6
-:10639000C5707E5BC1C8A22D186F5CB697EFC1585F
-:1063A000ED97FCE4EC56F47BC8C1F2952F3D86FBDB
-:1063B000122AEB33F977658AF7F896E39C63C148B4
-:1063C0006D07DE2B76B9F9DE908AA549AC9F66741D
-:1063D000D0CFBF8B66DE8733F0FE861E9FBA7FA4C8
-:1063E000FCFE29DDCF80209C686A77A1389DCCBF58
-:1063F000417E0EE28F9A6B17C709DC77C87B2AECC7
-:10640000E23D197F4C6B3B6E90A1C71BD3BD323E62
-:1064100064E0EFDEAC592CE76C463CF71CFECCE7A1
-:10642000318DD2ED97F6C2AC5B15F6574B56AB7C6F
-:10643000AE7C8C3A8EEF7159B84AF1F0FA7AA03BF3
-:10644000E77B2FBC87AC310FCE97790A3BE4E1BEE6
-:1064500075C50DBB643A681111DF29593398D75BB4
-:106460004990CA36EE3535CA1B57EDEFFC9C0764E0
-:10647000F4F3FE6589DB6F4F8E58EFB3EB14D3FD59
-:106480000A062CF02316ED717F3D29481AC7F41E29
-:106490001E05FB8A6EBFC4C34DB766DAF17B24D3F9
-:1064A000E9CB969C0BF7FFFFBBFC7FC4BFEF53000B
-:1064B000800000001F8B080000000000000BED7D35
-:1064C0000B7854E5B5E8BF67CF2BC94CD879910458
-:1064D00048D80904C2439C109EF5C1CE0B2610601B
-:1064E00092808227840904091EF446D4126C940910
-:1064F00099C41051138D0629EA80C0A16A25564F10
-:106500008516DB017C8B8A20D6B636191E8A6D7DF6
-:10651000A470A8F67C54EF5AEBDF3B99D99904D0CC
-:10652000F6DCDEFBDDF8E1CEBFFFF7FAD77BAD7F0F
-:10653000A7289DBDCA2631D6DD2A48DBD318AB94E7
-:1065400014F3441B63DFE2CF0CC696B5088A6F7C58
-:106550006FB9289D2D75413952B1333699B10A4929
-:106560003627A7E15332C7C2FB65B71F30B178C6E3
-:10657000968F644CC882F6B10EB30DC75F05E30B6E
-:106580008CDD20F90BB0FE86F132AB8B81F6DE2C70
-:106590003383F9DC9BF83CEEA618F31550AE304A75
-:1065A000E6142897453286ED617D3EEC5FE957CCD5
-:1065B000B1361C972D2DB1F1F5C606ADAF425D6F1A
-:1065C000654B8C7945C8FB56930CE5C58C291D415C
-:1065D000FBD39E331481F6B3CC5B9CDA0EEBADF4A7
-:1065E000D8259CB7D2A8981DB82E1C17FA2D6E6B13
-:1065F00037A505F5BF423150BF198A4CCFA2747F31
-:106600008680FBBD35C281EB5D2CB598109E451A86
-:106610009C1FE6705821F93370FC15560E076DBCAF
-:10662000CA363E4FDFF5717857B6559865A8BFD189
-:10663000E84A6D87FE37C23A3DF05CBCF94086807F
-:10664000CFEA088700E7C12477AACBDEDBFF938778
-:10665000AF4FA5FDC3FA11DE76873C3309D6B3BC34
-:10666000051623D393E62DCF66D51D4170BB5E3151
-:106670003296804F033D594BBB621D0CF060FC67A6
-:10668000B8F9480EEEA37E0C631B601F6EDBCF7360
-:10669000709FD29D8C89D361BD9BDEA3FAE5494CE6
-:1066A00012A0DECC5E10B0DE5C097DA0CC3C054AB9
-:1066B00020938FF56D3A63293832B4B701FE789292
-:1066C000195B3755A67917B3C0623602C6D9540C88
-:1066D00073C03A13F93ACB07B1EA9F8581579BBA49
-:1066E000DE1BD4F32E33B097596C6FFDDDEA79973A
-:1066F000213E07F5C7F170DCD55A7DAE3FE3D6F1F8
-:10670000BDEDB579CB62793FA407C4C3D52A1E601D
-:10671000FB35D49E970B44DB8606D8CF9AFB449F6B
-:1067200045C0E7930D83B1FC9CE040B8FF79CD8B69
-:10673000EF5C07CF3F3DB2AD1CF7A7AD63C5D7599E
-:106740004C8E83F3FDFA2A7A56FAA73339BBEF3E13
-:106750000F4F75FF48991C843F0FFD74941BE6FF93
-:10676000F3B36F65209C3F021C1001CEFFF6D327C8
-:106770004D2CBD77FDCB9ADE3355D882E12510BC78
-:106780009A338FD2F92DCFE4FD967BFF5281E7C17A
-:106790006C663923ADEFF957789FE3ED6B1CD4DEBF
-:1067A0006DFB809FFF102689C9173F6FED7CF5E7D1
-:1067B000FEB8C9E54F12F07C5A42E85FBFFFC7D46C
-:1067C00075FB54FABB41C5E31BAA5AA9DFB2A68ADE
-:1067D000274558F7628D7E2B43DF6BE773769389ED
-:1067E000CEE7ECA68CC6242C77F0F3F977B163C220
-:1067F0005A68F7E7D53B6F494EC755FB525D57F0D6
-:10680000F361D9FC7CF0B912CE87C5853D9F3DC1AF
-:10681000E7B3F2097E3ECB9F7DFB0FBF9009FFF8E7
-:10682000FEEEB3F890FF2EEB78EEF80FE0FDE2A657
-:1068300056531AB4FBB59246FBD2FA2FAFCE9258FC
-:1068400034ECAF699B09F9C0AF15392C9E6B7065AC
-:1068500046CE671E37C1D9C6503D13627BDB2F661B
-:106860004A22F211E619C676C6F75DFF9F543A2A0E
-:106870004A779813917F3544B1ED12AEA3E27E368C
-:10688000A16F7BED792A82D3C5329807E9F3548E44
-:106890002315E9A2CC6008A137ED7942A5AFA1513B
-:1068A0001D8B71BD43E398540F20FE71A4926B8041
-:1068B000797FFC03AB54EFC0FE6E19EB2D562679A1
-:1068C00000E4DB0DF244C24FC6AAEF494658062643
-:1068D00023DF1BB93AF0175C1FA253C444FEB4C3B4
-:1068E000BE2D391C4FA0CC06F3F77E7CA6183B8842
-:1068F0004F45D670FC33B3F7A96C06BE8578ABF56F
-:106900001BCA8E08F83E19D682F337672EA3F333DD
-:106910008DE4F4D2DFFEBEBDC4FD9D4A73FB484E3C
-:106920004430697B0CED6F0D967BF697C91403F428
-:106930002FFFD115DB9A61C85375CA4133D49F5AD2
-:1069400067A3FEFFA8FDEAF7B9B8B222649F3D74C1
-:10695000D3027C2D0D9FD9A9B8CEB3569808EA4F23
-:10696000DD1A6140F89F4AE3FA0263017B099CCB80
-:10697000AEF5F0AB85B1DDEBADF47C6A3D20D368BC
-:10698000C69E599F44E567D7CBF4EC589F49EFD397
-:106990007338FE95452AD12897BBEBECD2768487D5
-:1069A0009FD34D67CD088203E8099C1FAB7A41A7AE
-:1069B00014B0C706F169901FF7A1BC633523D84E08
-:1069C00098A2B3E594DD301EF192AF4F6B7FBBA967
-:1069D00085ADC3768F0ABE9D306ED4EDEF1524A22F
-:1069E0009C6E4BCB12A0DF929A73C40F97D806CB44
-:1069F0000CE5B8CDDD3815EB37A7491BA05B545B20
-:106A000056670DF45FE11DEDC0F6B70B7223CD5B49
-:106A10002738705EF851AC53800FE06F505E697B91
-:106A200075A4CA2F0DC82F97DFBFAE3119CA270C26
-:106A3000AC5B04D014198A6762B9684B8CA31EE55D
-:106A40006D3DDF0FDB0A7CD4DACB470BA7B9AECEA6
-:106A50008173661700DF60FCB1B03626E27E3A141F
-:106A60005C3F03BD6327C3F5BACCD8FF972ABFECC0
-:106A70006C3B6197D5F32946BA71779FB807CFD59C
-:106A8000667034CB28DFE5776584FB1B22DB2E2381
-:106A9000FEF0FA35765E0FCF0D0D50BF669BE843D2
-:106AA000781488658303A87F6D16892FAED8563A6F
-:106AB00018F58D155046F9B505A7027C6A6CCBE335
-:106AC000ED5A0B1EF1003F4D15980BF9D16963A0EB
-:106AD00018E1F1E9B6C4D83AD4F76EAE1FC5A0BE2E
-:106AE00072DB3DA9F8FC745BC422E4E3F952717EC9
-:106AF0000CEA3F5B63B244B997CEAA72389DDD744D
-:106B0000735E22CABBD5DF1C7A5C02B9BA0270542C
-:106B10008271CF7744F93CD064F5FABDA922A096E2
-:106B200025DEBD3C07F0EBDF0DFBAF9B8E7258F00E
-:106B3000ED4AA6F672A2148E8E357D0AF058063CF8
-:106B4000BDF9EE0F699CCF0D87E72D86FEAB6F7EFA
-:106B50003E1AC7F9F7878F4D91E0FD0F26B9FF1751
-:106B60008EFF2761DB2E0940C2366F9B80F2A33A6D
-:106B70008771BE1AEBBA6E3187AF63BBDCFF7C5501
-:106B80007B0582A7565EE21B6466A897FA9959C2F4
-:106B9000A7C4480FFE54643528DF35BD447B5FAF82
-:106BA000C2E5D3412DA978FEAB76B5A7A2FCF8A328
-:106BB0009D97DD3B5E5B7127ACC3DD669018E09D61
-:106BC000DBC848EF5DEEE1FA34AB026692DC3BFFD6
-:106BD0007D3951B4FE559BB343E41EC8479AE78FF5
-:106BE00046E6C4750CAFEFCE42FDE9F746FF0A3C1E
-:106BF000D7DF837EEA49C373E2F8F7FB167126BE3E
-:106C0000F7DC2EB00C01CBCFDB47DA480F33105F37
-:106C1000FFA5C9B713DADB2775F891EFDDFC42CC8D
-:106C200044046381383E11F167CD3ED3CCA15C9F13
-:106C30009270F6D546BF39DCB9DDA4EA513DE517BF
-:106C40009E3323DEAF7E06F401A4CF17041FEA377C
-:106C5000AB3B9E7B75088C77CBDE8A6C9C476B7F49
-:106C6000CB0B1C0E112C602E0DD2AB2B32631B876D
-:106C7000028F7CF6C0474B1F862D55E039FD80B151
-:106C80007D333E70D78DC4A744FB64C66ED2C74126
-:106C9000BF32A3FCBFD9CBC7BB39F368633AEDABB6
-:106CA000388E059DFF9E1C13F5D3FAC3BEA95FBDA8
-:106CB000F5EE2702B05EA5DEC822AE85B2917DB4A6
-:106CC0000BE1C7A2A59DB80F233BFD2A3CD78A83C1
-:106CD00058333CB756AFF90F6A5F67914478D6DFF7
-:106CE0005CBB2700F3C9227331E8EFC9ADA6F13CC4
-:106CF000662E7FDAA39E7DF44628D72CB03900BDDE
-:106D0000A11C4DF0D9FF4303F1F964D67DC800CF33
-:106D10004406540400FA539AFB30E237FDC0B86BC6
-:106D20006F937DC88F81830B88E75FBE74261BD766
-:106D30007DEDF0C039C42B53DD19773ED0FFFB3910
-:106D400012D74FC607B2B15DC24195AF198F907C83
-:106D50003425C9B1A8AFF8712C5CDFDF0C8407FBC8
-:106D600005FF9338AF06A7885CAEFF19B2DC7F4001
-:106D7000FEA708A63BFCD07EBE10EDC0FD1E891507
-:106D80003326023D7F69FA280DC7F500DA8A437B76
-:106D9000F5D85C75E9E621D336235C7200A0EC6A75
-:106DA000B065C6C7322394EF65866E0BAC23B7FB84
-:106DB00077DBEAA02C3D38888920AAEA2352592E95
-:106DC0008C2F1C848DC27E0E8E3FB81CD7796FB776
-:106DD00095219C983554CF351B92FD3F427CAE8E59
-:106DE00076B02494431D59C88FD82D364733B45FED
-:106DF000722190F1BF502EFDED30E9E963D2DD5FE5
-:106E0000E17E8688CA0937D4DF2BF9473C80E3D777
-:106E10004439EAB81C61C1EBDFBFEE6FD171D0EF2E
-:106E2000CBEE51C63DD0EE4BC5EA000D9675DE396E
-:106E3000EEE5ABA07CB52A4FF4EBFA324936A2DD81
-:106E4000F165B7D58F7AC89736834F0090E6EE3F4D
-:106E5000F4A100F23BD76AF38BD1D8CFF459B0BC80
-:106E6000614752623E194722867D0BF01CACCAA5D1
-:106E70006B0785DA8F4372B91D342497F31FA3EC97
-:106E800020389FF5185933E2218332CE6BB44ACDB6
-:106E9000B0BE5FD9762D01CA6767BF4E1F8472E30B
-:106EA000ECFE1183D8F8FEF9E231D427404F583A6E
-:106EB0005149CB9DDC2B5F17AA708968B9DE84F03D
-:106EC000A8077834033C16DA0C7E0BEC8B2D088572
-:106ED00003ABE92E47BC61866807D20D9E2F9EBF8B
-:106EE0002C18BAD9557DCF7BC605C9FF23282F8121
-:106EF000F344B8969FFDE48A07189DDB15B9097421
-:106F00008E0D57B2DEF3FB573B2F667434E139AC7C
-:106F100015ED2D780EF546AEEF7900B776C650B771
-:106F20005D782E6BEB47D2390DAE073E81764A9DD8
-:106F3000916D8F47BE7294DAEF54F54196594D7CAE
-:106F4000A6BCDE2221FCBE8A8CA6FE0CCED5342443
-:106F50001C9FE17CA5A692115F593ABE5AC0734F9F
-:106F6000C219603F9D86801DF71988002D129EEB87
-:106F700072D389CE87224718C1CF19FB3FB6CEBE48
-:106F80001DF98D681DFAD8691045ACA93B7A2CAC67
-:106F9000AB4D601DB42F93CA3F56D9489F6B8BF100
-:106FA000117F6B5B38CC817BFD92A9F55591C45F55
-:106FB000AE3218A8DCBD7830D9636D31C05A71BCCF
-:106FC000C563496FF8F93722B7D73218AFCF62A33C
-:106FD00036637D71268DF74B8D5FDD67A7F1DA8A09
-:106FE00095E448AA1F6CC0FE4BD3DCB7217E0C1180
-:106FF000793B503CA8DD962D4A329EE7961233B578
-:107000007B44702D5E81E35C6123BD31B038F2D9E1
-:107010005DFC38FDE85FEAACE1FBD6E860DD54CE0C
-:107020004F877B4E3C8AFCC3930B27624379F1C5A3
-:1070300012C46B458C76000AF739E7AF7AF09C757D
-:107040000370597C6427D9EB72064360C3F9492C5D
-:1070500017F1E410C013DA7B4C70CEF1FC9C37C4FE
-:10706000E339CFDB167CCE309E672DBC17D6443B70
-:10707000846974CE99387E0D8B74A07DDD737EBFDC
-:10708000F265E1533438922C008BBDE9EE8755FA56
-:1070900025F83EF607D81FC0A5DC1298DC82FAB9A5
-:1070A00081557584E1034FE472FB4062DD2694AFA5
-:1070B0004B35FCAFD5E17F6058CC27512AFE43BF4A
-:1070C00017135DDBF01C3E178E4DC19787FF2E2EE8
-:1070D0000A37FE4F54F9F266BC6B37B61F693C386D
-:1070E000EC36D437D65948FF65170E0DC379D7A6AD
-:1070F000B99EC6FA8891DD66F44F7526779B707F3E
-:107100009D8BFF94827AD6D29AD7883E2F757D1BAD
-:10711000A22698506EC638B34C01E89FE8CC7A0599
-:10712000CFE5E85C8B6C09E3073930776A0AEA43FC
-:10713000C70AA7A620BF3C9602244FF2D461473E5F
-:107140006ADA7B851DD779CC994D6599C96AB9747E
-:1071500040FEFA67E0AF7E5004FE08F61A3ECF808C
-:10716000BDE6077EFB31D86BF83C05F61ABE3F0141
-:10717000F61A3EBBD63BE8FD31E788BD8817E75BD2
-:10718000B81F65B9D111562F5BFD8CC8FC1A7F83DF
-:107190007F37ED880A29576D8D0B29DFD8061864D3
-:1071A000ED2D576E1A1152D6F4CF65DE7121EFDD49
-:1071B000B5D921E5FF67E0DBC4E18BFEF27F25F85E
-:1071C000E2CF269077A5F80BE0F7DB9367111F3D20
-:1071D00026B0EA3878C6489CFF195D02F9DDF0A7B1
-:1071E00005E47609FE027463B4C90D58EF85F60F05
-:1071F000425BB47DD1FE60CC61AA80F70B9D111279
-:10720000CAF3EB5835D1D922D642CF1B58073DCB14
-:10721000D8117A96334E875F5604A6E0F3837877C9
-:107220005A1EAC7FB5D5FD443CDA6D29EED171C84C
-:107230008F6CB16497F6774EA8613355CFB54D5139
-:10724000F7053F0B70EDD0EF68D4843BEE907BE701
-:10725000D1C687F9AECC433E63E2F3BC3D796A0AFE
-:10726000F207E64A08B1A7FA9BAF559593154E0E63
-:1072700027F4D962F9F442C1B701CA075A2D66F45E
-:107280002F9CDE6852F5F5BBC9CE3D719CFB654E67
-:1072900037CC4A45FCAB6B1D9D8A787EDA2437D407
-:1072A00000FC4F4F07FEED203F8E03E5C349A79D2D
-:1072B000FA83A488CE82735BAEEEEFA4EC30AF838A
-:1072C000F60B9345E681F66E4F5A34AE5FDBB77E20
-:1072D000DDCB365942F060FEB4D0F24266EEC5B75F
-:1072E000343C6F736F3DEA4962D920F7007677CD61
-:1072F00047ABDE7D39085F6FC8B3C723DF6453D95E
-:10730000D46FC5DEFEFDC1F7ABF555EFBE6CEA8567
-:10731000AF865793F25CCBF19CE0B519E916E062B9
-:1073200040797C6C2F87636BD4B5F75D0570287945
-:107330005F641CCEE59EDF233EEFE37E7DFD3C01D6
-:10734000A4EBD148AF9CAE2BBCEF91FDB6B4B6D840
-:1073500084EB2BB175A7A0DFE9C05DA353F05C8E71
-:10736000CE1D9D827CE350E1E8C76E8771BB8A44E5
-:107370008705F0E940D1B9FBB07CAC569470DEAE25
-:10738000BDE754FED2FDF65458DF174E13C9A1AE27
-:10739000BDFF1C3E53B20FF80CCC7FDEC7F9CC4AC0
-:1073A000A38B35C2BC2B012E68C7FFB3F9CDC5F83E
-:1073B000CC5193AB2001E1552738D0FF56576821B7
-:1073C000FDE128D08785E353C3EDC827A781FD2BB6
-:1073D00021BEB926A34D796CEF88048417F32847A2
-:1073E00033A7F4E2FBF2DA9545E85F679B4C27513F
-:1073F000EF466708CAE712663C1908C253F70BA6A6
-:10740000DE32E1B5F1642008AFF578BA4787A7E727
-:10741000D98554733AAF3F32B897EFE14F307FB917
-:1074200045F437B2B45EBCFD6BE17BE5A824005F98
-:10743000F905E2EB0F27A6BD141082F8CA25F2B1B8
-:10744000D6A86F48EEB5477D4372EF7821977B074A
-:107450000AAF3FF83BC4FBBB38DE1F5B3895F0F248
-:107460009809E419C0EB686D7634964F6D2A253A79
-:10747000D3E8473F4F978AFF5ABBA5C66E93230CAC
-:107480007EBA6BC590F3CC7861C920F407F4B77E5F
-:107490006D5CAD9D36EE525D5C573FEE27795C4FDB
-:1074A000CCD85136E0F86000F6F6437EC2227BF17C
-:1074B00055443DE07AE601F87439397CBA8AAE2742
-:1074C0007A3CEED4E8D2CD301E7B7481E843FDB522
-:1074D000CB798EE8F43CD0298DD1CFBC9FAAF4F9AA
-:1074E000894A9FA755FAD4EAC59D0F5F77038E5B43
-:1074F0002B129F3EBA203B01E7FBE38E0C9A17D676
-:10750000034605E8212FFFBD024C34E40F76E45F0B
-:10751000C7010E6827942E2C257BBAD4E44808A70F
-:1075200027E8F7AD1FEFC05C8B81F1F188DF95DCB8
-:1075300055CA1A912F001C103F8F637BA82FD9C901
-:10754000FDC087B07D7C309C4693BE727CB7E04026
-:10755000D161DAFB773B9EC32A5F28BF58B9392A2D
-:10756000E4DC56B4C485944B0AF93E8ED78EA0FD58
-:107570005FEEF969FD2FF5FC6F52FBE39ABF253DE5
-:107580002536643C0452E87CE9BAFAB1BAFA89219A
-:10759000E58BE1E309152F34397222425E122EBECB
-:1075A000D435CF52159CA7313B9FFB5B66E773FF39
-:1075B000CBE5CAD582FCF072B5BFFE1A7F1A95E7FB
-:1075C0002ACA4739EA2F35E1BE2E951F05C9E105C4
-:1075D000D43F2098B17FAB2A67AB3A38DEB547DDA0
-:1075E000FF2AE2D5E7AA9E0E7849FCFE0B95DF7FC5
-:1075F000F19F6AF9A702E1E5A17D6BA3516F3FB34B
-:10760000777434DA61273BEAA391EFCBCC13FD0307
-:10761000C0C7CF5C203F61BA4F3B06969F7F54F9AD
-:10762000CE193C07929B129DC729557E9E40F94971
-:10763000F23E939E47517E42FD82E7543D7DB74026
-:10764000F4BFCAD812DE3FBD23945F556D8DD2C9F9
-:10765000C950B959B96968487999774448D95D1BC7
-:107660002A370BC432E2EB677C1C8EA5CEEC90F679
-:107670006764395A22F870387C6192A311CF4EFAB0
-:10768000E2A283E945E3BF477570388D7040FCF492
-:10769000960E8827A7D4FE5A19EC4213CE5B6A7562
-:1076A000BC128F7E844D8203E3540C78CE3438C7ED
-:1076B000230BB29E6C0ED233A40291F0F984F750E2
-:1076C0007932F21F30C0D0CFFB5AEDA154F4AF563F
-:1076D0003C13457A937EDECAA2503EF3594371EEC5
-:1076E000EFA15FE9FBA2CF8AF0288A21FEB5E0393D
-:1076F000D12742B9AB362F3A781F67543AD4E4CE3B
-:107700004A6375D873ACDA1A7A8EA5457534CEB152
-:1077100087850E61103C0F4C0749DAB75FA991EFDE
-:107720007FE53322F977577AFFF236C61557821E66
-:10773000886AC26B4DF5F310AF4FB84C06E2A71D37
-:1077400071F3103E9E05A22303DA1F6E1A41787E64
-:10775000B2296F30CEF772BE48747566AFC5205C33
-:10776000094F9789F9C95EF5D3797EE62D25B97160
-:1077700006E1827A905122BA78379FFB914EC03849
-:10778000586F003A417DB8CB273A7D61E8E3DD7C54
-:107790007E1EA72E3C40F8F3AAEF5034EA15273A94
-:1077A000F8F8A76AA5688C4FBDE5CDB6D3FA8A6014
-:1077B0005CD47BF75D4F72F28C97E323AE93ECC3FE
-:1077C000262E3F8E7997DF3F1DE0F1F92691F4CE0A
-:1077D000CF9B4AE74DC7F3DE64A2725EF1428A6F27
-:1077E0001CF371F972DC77AA1CCFEF8C174E1FCAFD
-:1077F00075FBA6BE3D291ECFD944F850F94CE8B917
-:107800002CDC144A5FF0139D057A5725FE26E3FF12
-:10781000949968272D4B02F909947BA2A8D484FE81
-:10782000C9124FA83CB2B06213E21DEA97D86ED9D4
-:1078300063A593FD487F1E81E4E5D217009F603D5C
-:10784000A61D5793BCAB68B184CC5B521B6A1F2D3D
-:10785000D3D9437A7BE9B2E585A9BA3C9CBC1854DC
-:10786000A0CA0526CD44B89F04C3BA390BE0F982FB
-:10787000A860F9BC3782F867C5D2B3D7A87AE9B552
-:107880008807CCE161D3343B3D88CE9679459D9EF7
-:107890001E0A5FD09F3F41FDB8294E95A39E52F22C
-:1078A000D78DCA53620A701D976A7F5FB27E5BAE46
-:1078B000EAB7E5A4DF1E5B08F202F673149B04F539
-:1078C0003FB0F07AF2EB1C9F7B3DE9B9C77BFC3AF5
-:1078D0002ED5AF730D9DDBF122C067921B0EAD3C20
-:1078E000A01EA1F18B8FD57338A5F2C9132A9FEC86
-:1078F00052EDAD46555E78557971BC48B5B7E21981
-:10790000C90BA3516197C2676E6C8BD2C987389D32
-:107910001D3554773EA1F262B7CB3DB300E0664916
-:107920001A1BF2DE244D0C2967ECD84FFEE3F3322C
-:10793000CF27BA077102E3250B797E16B37690FF45
-:1079400078A143A6FAA1182784F66852611E898699
-:107950009FDA7B299EBFD7CAB1B0EB3A6C97D6416C
-:10796000E5FA858C611ECC486D1C00471DE8094373
-:10797000D18F0DF324818186ED357C1FB6A095DA79
-:10798000E5563149807655056984E7494C21FE3238
-:1079900078355330DF85F99EA7764FDE0DFB00BCAE
-:1079A0000FD4CF20BBBCD41ACDE3DD201F07C6B354
-:1079B0003A4E3FCE38D25B8619396AF68BB76ABB2E
-:1079C0008BE16D901E7407D10533903FA2356A821A
-:1079D00009F1B4C4E622BF01E0F5923BD05FF99211
-:1079E00099FB091672FFE4D1C2A98FA1BD3B618F3B
-:1079F0008D7CC94757003E137FEFE676426DA9079D
-:107A0000E5DE074E2EE7C6EDF9CC80F96E5D7B9979
-:107A100003CB876A9F3FFB26D2CB0281EC8C63B5F8
-:107A2000799C2F33E6C2FCCD63CEBC0D549E0686F6
-:107A30007116D283B2C188EB00B83653FDF2FB2633
-:107A4000A3BE735824FC4D52F38C243CD7E4DE7261
-:107A5000BCA296D95E2A2715F1FCC05FA8FA41871F
-:107A60007A9E3F51EDA05D2ADDB4A974F3A04A3798
-:107A70001BF5FED0AD9C6E46191DF745417994C7A4
-:107A80004E72E6DDA253B46EA07F09E3B969856248
-:107A9000F32480DB384B80F8742988BD0DB09F9C9F
-:107AA000A23ACA5F2C75338A57942CA8A3F50530E7
-:107AB000B67415EA4D7582A8D6237F1C17E7A7F682
-:107AC00025562661FF52E77307300F77A11B40034D
-:107AD000E5FC057502C1A702C683F6076A1FA2F17D
-:107AE0008E57F1751CB5F3FEC72A98E481720673B0
-:107AF0001EBC9DAFD385F1D0E3B5CF1F20782FE01A
-:107B0000F0BEEA5343083D66F92343E87AEC8ED889
-:107B100090FAD19B878494135CE921EDE39CA1F456
-:107B20001E39726248FD3167A901E5ECF9055A7EFC
-:107B30000FF78B69765DCE1E9B01E171DD5C51F321
-:107B4000E31AD860B4BA18F97D9B543D91B58C60A6
-:107B500098BFF1E49D06CA0FD8B8A0DE8A790FE776
-:107B60003B8C745E302EF191E3FB8D34AE35CD2B22
-:107B7000A01FF35E80B318A4FF3569F24DF5ABE3A7
-:107B80007A8C41EB899519668CF5B46F53F1E92134
-:107B9000751DC0B7734C38AF8BE3495C113398A0A7
-:107BA0007FC2022EA7F574D9A1F6FF89DA7F978AE2
-:107BB0008F5DCE273744225C1631D2470AC4D51BCD
-:107BC00022701D458CE8B1C37F3032587FFC457F61
-:107BD000E32CC82EA0713C9C8F8E9D2FD447E0B91A
-:107BE0006E0DFCE91D78FEF2F3C60DD1B0DEA704E0
-:107BF000D68114A5F14F4DFFBEEA8B26AA1F3B117B
-:107C00004C34A8FFE517CDBCFD1426A3BFEB17AA83
-:107C1000DC6952E92763C778F22F9EDF6C26BB67C9
-:107C2000D7BC95DBDB60BDA3E7DCF5D40B882FF375
-:107C3000EEFADD0B72AF9E5F3A2FB913F3F747AD43
-:107C4000B733E40FDABC193B3ECBA5754B468678BB
-:107C5000FAF4CE9F2FC3F17EB22BD2A0C0F84F6FA3
-:107C600037127F1973EF63DB37B3BEFE985267A8F4
-:107C70009DFF938DED4FEDC5F735CF3F713A284FFE
-:107C8000E7D8DC7B52D06F7A747D555B7E46FFFC73
-:107C9000B3D4CCDC18BF73FEF2B39FBD05F3FFC6AF
-:107CA0003D6662B01D306A26F7FF1C5D5FD3960FFC
-:107CB00076EA5891E72930A36703C263EC8B8365AA
-:107CC000D4DF80148C6E80A57376844181FDFDC65F
-:107CD00067DC467C60F6C60C3CCFDCA78B0E7E8A48
-:107CE000E77C5CC5F77EF491A3EA39F5944D32C187
-:107CF000DDF39295DB378A9C42F6B1434E2909D2D7
-:107D0000E78EDEA5C5971C7F403E5E521645716525
-:107D10002DEE223AFFD2807C7EE9B4EAC912AD3F53
-:107D2000348E3F04E1978D715E1EAFF7788C8CF234
-:107D300082606B48276BC5B1946FF2E1AA1F52BCF9
-:107D4000DE53679132E2296EB007CB35C0772C93B2
-:107D5000288EEB43A1BD7826F7239C5B54FF9859EE
-:107D6000EE1FFEDE8B9C8F493D1FFDFBC533B91E08
-:107D70005A8FE79211722E07DD93C29C4BB495F097
-:107D80004B3B1731BA89CE85596D9998F791C851F7
-:107D90000AF7F336CAA1CEE3DC5FF69BB2DBEAD684
-:107DA00042F9EC85410CE9428BAB9427F1FC033A94
-:107DB00012E05B26B57FA2AA77231F43BDBB5C8D73
-:107DC000BB742E611477D1C63B5F3348E2E3DD42DA
-:107DD0007A737935D03FCA92A85F917ED13082E71D
-:107DE0004794DBBA9750BEAA607060DC3C51A7D7BD
-:107DF0007B5835AD37F17D91FCF986A84DD43F1104
-:107E0000C02366612B330181DAA36007A315F34910
-:107E100086E00B3948CF52F375136B5EE4FA511EBE
-:107E2000F44C0E994FF896D65FFFB1887CA0C6221D
-:107E300023DFC3DC2CE4DB04BF34C4A376EA2FDDEC
-:107E4000C424BCC7C11426C74FE17E309C4FBF7EFF
-:107E5000188FEB85A09FE17E855A3EFFD639FC1E28
-:107E600008DBCFE460BB8505AF67444859F59385CF
-:107E7000964D49E61039F59B0BA583AA07F0D7E884
-:107E8000FB1B64D7C07EDFAA20BB2BBDB7BD9627E6
-:107E9000A6C179488DE58410DD7FBFDD2EE5E99927
-:107EA00080CF36E6CA7D13E0E17E5F247967883AA9
-:107EB0004CF0084470F8F4E8B38BB8BE0BDA791DC7
-:107EC000E55B83BCC3F3C33CED5180EFCC139A2731
-:107ED000A0CDABC5973A557E1C480B2C718581C748
-:107EE000C1993C7FA16BFD9714EF2E47FD167039A9
-:107EF000B0E1CF21F73F4616E71C9C497EB7D03C46
-:107F0000044D2F45394BF8EBE172B6D3934D7CE726
-:107F10003CB3B790FEAFE7374646791F6BC548477D
-:107F200033F9EDEEA6BC911A8F45B2C073AE23D4DF
-:107F30001F337F5AA83C2856E274F222D4DFB5D012
-:107F4000151A271AD9B68EF8D779D49B88DFF1F5A0
-:107F500018D5BC3213DE2F11D15EF7D0F3B0CA9F13
-:107F6000DF51F5CC08E4AFF03E0A13CB011FED2C36
-:107F700040E54188F22330A55DA67CC738A650397C
-:107F800081B9A9ACE54126331F3DB5FC961416A076
-:107F9000F270D487442429999E23D00E19817A9EA9
-:107FA000A327DE4379937969142F2866CA1FB05D31
-:107FB00051F6E724F78AAE67944F0A9C64B9827938
-:107FC000250BB5322C14CB054C45CE7A5E5FA895B7
-:107FD000BDCB15E8DF99C3DB1B5FDBF8A4C746FC0C
-:107FE0004BADBF87D7F7941B97E760D964A0B2A4C5
-:107FF000B62FCE574CB3009F936731C2835FE729FA
-:1080000096E0B23B4F89082EAF2950A26625F49620
-:108010009FCF55ECC1E5AE5C655070FBA1054A0CE5
-:108020002FF33CD7F74D4A0ADABBF0B35B98C2F1A5
-:10803000107F5E35B993711CE51981E06501BEDDE5
-:108040004C7CDBC5904E816CAC9847047CC67C07A9
-:10805000D4B38966CAF73344D95207F247EAE92B09
-:1080600060627BD14F576C748FC675E9F99EE079D9
-:10807000ED6F98C703F4908B7A7E408D87046AB9C0
-:108080003F40A313EDBD7EBE8BE13D5382FCBCE9B6
-:10809000BDE3F6B77E3D1E1F51F5BDA3AABEF7BED8
-:1080A000EA97EED96FC018F389B597BEFBE79F46F4
-:1080B000F64910FFECBBDF534B4C5C7E48282F3A4F
-:1080C00023D8A270F72AFB5B5F54DE4CD72CCAA7DB
-:1080D0001826519C81697C9FF39B4EFC15F8E0B8F3
-:1080E000419AFDEAB0221C3258D2EC4C98B7D5C95F
-:1080F000487FADCF3F5882FCE77C19483058D7A95C
-:10810000DB4F23C531610FB7275A5218ADD79E26D2
-:1081100045A0BED4A0F24D0B8B291C89EB1F662411
-:1081200079AB5F7743B44FC0B8E2107F04F76FC4F8
-:10813000335F048C33C4E97052DE8A47949C582E16
-:1081400063F332A1BCAC4D949D30CEA1B65256091A
-:10815000E3564E033E4719E93C9F2256C5E371168C
-:1081600046F916ED09368A577B378E3EB002F9661E
-:10817000B2C832A0FDF886894EF47BD6DB62632953
-:10818000E6A4AEA7DEE6781DEF61782403BF4722A0
-:108190002956CC43DF76BBD189FC3CE5B949D16295
-:1081A00010FC4F79CF46607EFB139281EA9FA8CDE9
-:1081B000B5DE68C37B847E85F20CA4938A0DE6DD70
-:1081C000026D1261BCFBAB4EB68C62FDE343B4D3CF
-:1081D0001C82A7510EB3CE0F1AEAB734E9F4830715
-:1081E00066A9F1A4296C0A9EF3954F5D30A19EBB50
-:1081F000D426931F3DB749A0FC94C001472A9ED3C3
-:10820000A9FB4693DFDCDB24AA7E6B07F9AD0329CB
-:108210002C15EFD754B408A4178BDEBFD461BFE18F
-:108220009972328E337C527772B0BFEC89BB7E1864
-:10823000817CD45B6650FDDC8CC69165C59A06FBDB
-:10824000FFD82BF0FC099324E03D66FBC36204AE2B
-:10825000ABCBC4FD14CDC04FF17E6E734EC980749C
-:1082600068FA1AD61964B734C4A747E2BCBDF8ABA4
-:10827000907FFD744B36C547B637E5523E887E9CED
-:108280007BD7B30EB44F1AD65BE9D9A73ED595EA92
-:1082900080FE1FB7E6348290621F1F589584F783D3
-:1082A00056B4585844183C3EDD3A95E65B81F79841
-:1082B00071DE966233F2FD596D396684DBBDEB9554
-:1082C000E782E7692E76BF827C2FAAE539C2131BAD
-:1082D000F37B109EBFBE464945FDE274060B9B270B
-:1082E000F9EE2CAE67BC758D8BEE937C9C12BEDDD7
-:1082F000B1595CDF9F8DC43219F3D6D83B2B01CE28
-:1083000015404F75F0EA54537634E2AD89AD262618
-:10831000F59BB2520FDA73E7506F077EDE78D775A0
-:108320009B2BA15DC3DDA3DE45F67CA599EBCDECCF
-:108330000391E802F4C20AA4CFFF5A6095EA83F8D9
-:108340002FEA8F4A487E1A971BA626D16F067E6EAB
-:10835000DAFFC9DFD1DE41BC5582F0987EA6A8764F
-:10836000819AAF913485B471FA69987D9DCFCF30F1
-:10837000EEB2DC8AE7A9D7D3FBE0499F75048D8F65
-:108380007A6E3E532282D6012CC14FFE72379FB7C0
-:10839000A79D5A6F0406F36D90FEAEAFD7F6317A03
-:1083A000B38E5E9DDCAE03F80E18AF1BE30BED97AA
-:1083B000E16474CE6345E5E0272867DB45CAAB1E60
-:1083C000D7CEE3FFE78731F213F5379EC67FF1C7BB
-:1083D00038588523C0B531BE84CEB3BF7E66DF1169
-:1083E000256D42AF7D382629745D5ABB8C9E7DDD9C
-:1083F000C622B93ED881F699C5077C6F023E8F2808
-:1084000028BF33B7DD2E0DB46F3D3FC31F19D6BB58
-:10841000423D3219700DF9C3C79B05550F614923C1
-:10842000A7D0D545923FD85F09E27FC05778DE9E3E
-:108430004F20F834B79EDA7E2FF961EC0EDE8A9F6A
-:10844000D704A6C9419E07A4DD1364189A1ADC1B41
-:108450009FD2E0F8E9EE0DCF3E05AFCE3CB3E60B80
-:108460007C5A129645233CEF895F706D32B49B6055
-:10847000F625213F5DE9B3F4C13BAB862F69783F18
-:108480002FB4DE9214B47EF8D7BCEFA9CDCB504EFA
-:10849000EDB33A30351CF1CB13029F407A31D05303
-:1084A000D75DFF41F7F323A5B34B28BFBDD642F7F5
-:1084B000BAF4F07D729641CBA7A4FB1A1A3D45B4DD
-:1084C0008C66E85F3CA9DA4D2737819D0AE5C65ADC
-:1084D000B38CDF35E872142B4961C633D79A4FE06D
-:1084E000B9B2603B31BD779FDAF85D1EEE876C84D0
-:1084F000F18530FEBE8B8DF7AD4B59E904FCB21609
-:10850000BB56E1F3D4A6E5B4DF9ABDB55D6F429BDF
-:1085100086C1EE9B9D09B8EE11530474441A65BAE6
-:10852000EFE7F5FE8CE449CB347807F67C4B8731D6
-:1085300002F50F8FD740F1DB968EF8C89128A76C13
-:1085400086B071D6279C1C5EBDF2C4151DAC0F35DC
-:10855000E7737D48D853767F3AC0CB7B9CE7296A86
-:10856000FA87A4E2CD388B44FC59F2F23CB75E7D29
-:1085700088EBD5E751AF467D6972A5142C9F1AA2EE
-:10858000F977302AF31D1EBC87996763243F86E381
-:108590006505F45BD8986F561A7E27C3C1303F3704
-:1085A00016F41F19303BB18DEB3B91369B43413C98
-:1085B00056385D59E13F846764A6C2701EA34EBF62
-:1085C00030EBF40751577ED409FAC438D6A34FC80C
-:1085D000CC118D70B6DF37701E87E6CF05BD89EEF2
-:1085E000997918C01FF1D4EAA1F389064382E859AA
-:1085F00051E4F8C1BD7A3FDE67E3FE1589E24582AA
-:10860000D2487EFBADD9DCBF91CC78DC6B88C2ED63
-:10861000F909D33C5406FB81E250EC572C12F9F2D5
-:108620006E97FB39C48F34600368FFC58E67029173
-:10863000FB77D4CB59CDA5C5957E7C90FBFFBC863E
-:1086400048C7F63078FFCE1C2E97230FC1DE50BFEF
-:10865000BDDE4AF75B0AC4679A089F2619C8AFEDCA
-:108660006547248AE7AB7C36A6D8F5A693E2B2AE7E
-:1086700034847F92112C2A5076CDAA1F37E58EF4D0
-:108680004814F51F26FF9CE0E101D865C0BF6D3599
-:10869000F1B199F0FEF19A0D04573981FBC9B47B11
-:1086A000E77112BFDFDFEC3AEBC1FBBD1D73F8FDD4
-:1086B0009FC862E3EC74280FAF0D084877F7D89590
-:1086C00045A89734C93FA3F348CB920DE82F1B6A06
-:1086D00064AF5B2632F66C0CAF474189F58FD80743
-:1086E0006F0BCE27D9A1EEFB1121BCBEB2760ED7FF
-:1086F0006B3AF7012007A17DCC54FBFBA94AB2B726
-:108700007BCA0037E8FF8087DBCFDDCEA72A3D2379
-:10871000C92EE2F59EDFF2F6182F85FAA237D6545D
-:108720007AA0FDE369E1E7CD2CE2F07DFC8DEEC798
-:10873000308EF5D73A1EC7EAFF9CFDCC00BC658B96
-:108740009DA5B22B81CFAD322F0AF71D9975459C9F
-:108750008F74DA3A085E0CE479F455748F5EAFAF2B
-:108760005A918ECE49DBEBA6CA9C8F4C9E4257FB9A
-:1087700039EEE9C6BDB8DEEA4842FDB37E5577035F
-:10878000F28FFA03AB3EC47BE9E56566D25BCB8D25
-:10879000D5BF453BC87898E7BFE03726100F860065
-:1087A0003FC2FBA6B3AAF8F92D95B8BF56D8F391EE
-:1087B0002B0FFDB1C946C24B4D8F1D67513CE89749
-:1087C000DDA2E6B73371581DDEF7320E15C9EF1B77
-:1087D000550B7A2DEE2F9FE7EB2AF01FF2214DCF9C
-:1087E000B58D3786E4F59A7579BD465D1EF0D8C221
-:1087F000503E649F3C69407DEA576007E33AF703C7
-:108800001FC2A71FEC617C1E047B1D9F2F83BD8EA2
-:108810007EF057D767D2F3F5F50E7AFFE6FA69F4E2
-:108820009C911A30213E933F9AFC36CC2F905F4F9B
-:10883000C3B36D2373A1EED91C5EBF68F6C8FFF009
-:108840005C0DF5F16A7BCF3784873D65367645EE62
-:1088500078F28353F9D5C2CC15E4275AA0E4170265
-:108860009E24185C15F89D0776A785E216FAFDBCD4
-:1088700057A8E59184B7E3197EC220D48F535238AC
-:10888000B97F3FCE23025FC7DAB7D6EC40FA18545F
-:108890006C74211EA7A687C60F9E2FE47429CCE610
-:1088A000CFD437DDC307BAAFAFD1477FF5F5FB00B3
-:1088B0000506F55FEFB5B36BB1BE3E263C5D95A8EE
-:1088C00074D5EFF8366E4FB2D9406F43B1ACB70FE5
-:1088D00003945F72AE26CF4FE4F6BDE9AD3B05E9E8
-:1088E000AD2BC657877662D781559BF13B2122D2AB
-:1088F0001B9205D21BC63F347AABE1E7B114E90DF8
-:108900007E9D55FB9E2B0FE93189D397B067FF1AE7
-:10891000CAC7B88BE7D168F416A3E6CB47491D64F4
-:108920002FD28739B01FD0DE1601EFF17CF211256E
-:108930007F88450E7738BABB4C7ADBFC3DE9EDD732
-:10894000D704287FA2334D49427DC66BE27EABCB74
-:10895000A5C3ACD966FEFD8C2B7CC938CE16759CA0
-:1089600059C34E90FFAFC8EA10519E39650ED782A9
-:1089700049D9F4BDA18F0A79BF6FE62B1D445FD79B
-:108980007D4A7EDE0403A7DFF7DED8417221A5E130
-:1089900068F12CC4977522E9DBFA7DC5CD53E366F7
-:1089A000029F1734AFE4E038E221952EE575C73811
-:1089B0009F8F615206AC27C9239538312E74B5813B
-:1089C000BE2732A8F8680CCA676D3C38B824CC378B
-:1089D00041D5D73AB12F3DC24F876970083D1F2E50
-:1089E0001CC02F7B31FE51A8D2311E3DF971D57BC1
-:1089F0009297EBB7EDD78F784578BFA44F95AFF539
-:108A0000269EFF01AD25FC2EC0CB2EF79942F2FB2E
-:108A1000EAF4BFFD92DF8DFB58134D7EE52423D78A
-:108A2000F792649EB732947908CE5AFC4DD31765FD
-:108A300085E717DD50ECFE0BC2691B930FA03CB31A
-:108A400039D8228AAF813C43BCD8ED52CED2BCDFAC
-:108A5000510FCC2C56FE7B207C2ABE4EF906C7EF68
-:108A6000AF3EA7F8BF0E7D8BF45FC6FDA54BCBAA2A
-:108A700029376B08D849B8DE996A7E46FD305EAF6B
-:108A8000F957BD095AFC549987F993D12ABCC659A4
-:108A90005CAC02FA77A11CC6FB7B87037EBC176C1B
-:108AA000C17B6412FA5119F58FA9117C32F6173F78
-:108AB0007B05E345A63CFA9C0863D3B83DA0DDBF27
-:108AC00091F22FCFDF98325BF5374E6493103EA9B9
-:108AD00006F9A1E9F03EFBD18263783C931F5B115C
-:108AE00087E272EAB68652FCDED6AA9D1F6F437FEC
-:108AF000E8F4DF5A189E07E88F7E63D87CAE7F9833
-:108B00001C21BA2A29FACF4A8F11F951783CED2A53
-:108B100052F54FC4D3F8103CBD7A76783C25FDE77A
-:108B20007BE0E9CCD9A1785AA4C3D359B313BE17BB
-:108B30009ECEC775FF37C6A9609CB30B95E2D903DB
-:108B4000E065F64265E140F541F101B2FB46B169ED
-:108B5000D6E0EF1E6ACF56949703E427C46E3C49D3
-:108B6000F971F535E7284FB9CB76F26DB483FEABDA
-:108B7000C62207FBB3407F0FD1D75B40AE78C09EC3
-:108B8000FCA088E7411F5A67F1CF40BDB696DF478A
-:108B900028AFDD2660BEF790AA6AC10DFC2D5101F9
-:108BA000D311FAC728865EFF09FCBBD27484F4D9BE
-:108BB0007690C71E625FFC5E9A26FFC759AADF4007
-:108BC0003BB5FEEF46C7063C67261D407E5408F4C1
-:108BD00084F1CD6BBA41BE058DF7C6BE69E4579BE3
-:108BE000F135C8BF203F4E0E8C185CCEB32687F4FB
-:108BF0002B90D242EA67258D09A9D7E8BE33468D6E
-:108C0000AB4CDE918FF82356F03C8542392BA47D86
-:108C10007B592E7D0FE0CAE9FCFEDD9CCCE921E307
-:108C2000EBF582ABE13FA47751A707E8F504BD5E01
-:108C3000F0E3D9AA5EA0DE57D9680CE4127F623C4B
-:108C4000AF6EF8855F131DB4CB1CCFBD6567291FC0
-:108C5000A31EEC7FF4370D0DCA2F45BA98600E9015
-:108C60007F6ECB622B9DC7967D4FD1772334FF1744
-:108C7000D00DD1D1845C89F25CC7DB1FA4FE6C15DA
-:108C800097B37ABA146A5F24FD6FEB7CD81BD8EBDC
-:108C9000B9F3D2B8BCDD1F203F04BBD3CC506E7AF1
-:108CA0002503E58DFD58F0470823907E15924F2C43
-:108CB00089495ECA977C8F7F4F9131C7C66434FD66
-:108CC00015CA6B04B4EF7E43CDA345BC8D7032C78B
-:108CD0000628478DE7F41D3B899F8FCDC1CBD2D5A8
-:108CE000BCACD9DB3149AC05F36287E278D036BE43
-:108CF0008649F5E4D7F053FD30273B524FF3F3FE9E
-:108D00008995CCD50465B15A51FDCD6E35BEDE4D89
-:108D100071EF74C11189FE8D11A28BE2DED14CA2DC
-:108D2000B8F810564DCF28C1CF99C777E423570222
-:108D300000505EB09BCCF4FD8CDCA76D8CBE6FB494
-:108D4000CABC9DF2B20232F911EF39CEEFE16DB13A
-:108D5000FF90E2044D6FF3FB04F7A4783EC478E67D
-:108D6000905A81E13D56B18AC711C4D745C72CA896
-:108D7000176B5BE93B70895506F26B5D69AE3E404F
-:108D8000E770B785BE1FD705FDD1CFD56E3730A2AE
-:108D900057601E3DFE54F8E9BAC645718BAEBF0F51
-:108DA0002279C7747ECE7A37D7BFEBE3CD1CBF6C78
-:108DB00067FF807CBB313E92EEC72DBAB6FA6DE4F8
-:108DC000235BDE131D1B54FF33FAFF87E32F987FCD
-:108DD0006076A5A1DE69AE0AEFA73433D7BB93D185
-:108DE0005F7AD7CAA481F4A87EE3223683DF1C7D94
-:108DF000E9719186721E07D1D6A9EDB3D1B6465856
-:108E000026E36FDF332E52D64F5C24502D20BF1F38
-:108E10008EF513103EDC6FFD5DE322CFCCE5F2F65C
-:108E200072E322DABEE7AABF170162ABF91D14177D
-:108E3000A07333F4AE2F088E3B707DE5F89BCCDF3A
-:108E4000639C61BE5A7EFB99A39FA15FFFF0EE83F6
-:108E5000CFE073C68527CAD6005E144FB393BFF721
-:108E6000DD1FC53CCC870B8D1FCC755842FCF7F835
-:108E700083F849EB10F8BDFCE0FA62DDBA728DA10F
-:108E8000F1807C5B68FB99F1A1F5CE61A16533AB04
-:108E9000263CD5EF7743D4DD9427D7781B73F00CAD
-:108EA000F1A0F3102F5E360F3387DD97866FCC91DC
-:108EB0004674DFFE3EA77BD74BB7BFB196EC580395
-:108EC000DD9F3FB7A8E19EB764C40F33F3D0384E9F
-:108ED00005F1E8AB9F8E7F87623A92DB7323B45F24
-:108EE00096C7BF17D5279EA0FAF387D71CE8C80FEF
-:108EF0008EF70E76AF9E03FC7CB8EDAC807AC8F09E
-:108F00009A97A9FEBAC59307C4A38C9A431DF94149
-:108F1000DFF5CB30BA0CE8C7C8A87995DEF7A7F71C
-:108F200018640FCFDF2B33CB646FA9796A192ADE5F
-:108F30006494717FAB94CEE5CD1613976F1EA8167F
-:108F4000AF82FFB5E9F3DD385F3F3F8DDFEB60C0F7
-:108F500085905F69E3E9E59926076C0AD72333CA50
-:108F60001EE17245CB176CD3E7C5B91F44F808550D
-:108F70008DD46E6B9EDA6E3FD74FD96C26A15C867E
-:108F80007D86CD137D748E1A2FEA273F8D69F6E317
-:108F900082D73FC4FCBCCBB61FFB1977466A20ECD6
-:108FA0007DDB3D85DC7EEC8C08A4201FEE3485D76C
-:108FB000DF1B17CCFCE99C01F457CCAB4598F66B52
-:108FC0002F7CC7BCDA0FD57891162FD5F26B99D1CB
-:108FD0003711BFF39969FBE0068A83F693577B8FBD
-:108FE000DD11C07BEEDE8A08C776F6DDFDEB279C3F
-:108FF0009C9FEE98C3B8FF5E175FD0AFFB83393DEF
-:109000007185E373E85E58F8B842CF3E93C3FBE343
-:10901000AE98A7DDF757EF2B39B9DEA79814162EB7
-:109020000F54CB77D7BF077BE8CC9C20BF9EBB2ECD
-:1090300083FC76F5268EB71E997F4F50D31F6DA8FF
-:109040003F921ED542F5D1555C9FD4F42C498D6BCF
-:10905000E8E909E8E3AF388F60E374ABE9893DF4F0
-:10906000711DD007D0E530C6E34A06356F74989578
-:10907000A7A07F573DAAAFFDF4B5FD3BD94F753B87
-:1090800023C87EAADAFE06EA55ED35DC4FD869AF73
-:109090007E03BF7FE0794F24BDA9BFFE9A1D95389E
-:1090A0002FD48EC2B822E263A2CD27C857A01D15C7
-:1090B00030B9617DE56847D9306FD53DAC28A1AFA7
-:1090C0003DD575F79F29DF15ECCD94A27F047FD0A5
-:1090D000F9970EAA791007469E25BF8958C3ED3D22
-:1090E000B186C7438D653C6E6154B81FC50CF2084C
-:1090F0005D819A1F658B23D48FD295C2FD2889F993
-:10910000D57ED4034DD32C9242F291FB55B4BCF6DC
-:109110007116DF1B781FA33ECBC8300F1D1455B24C
-:10912000032D6A7C83957179A5F94DF479D3369D29
-:109130009F44EF47C92F0AF59B3C2EC8F74E87790D
-:109140009EDF5CF016A2ED7F6E5D11857E93177D2C
-:109150000D7354BFC9A3B89E7D1F72BF49D73E6E21
-:1091600017B95181B92A1CFEF58953911F64DDE1BD
-:10917000F5142FD3FC5089552A3CD4B80FC217E1FF
-:10918000293A393C6374F0F40ED3E2422A3C133896
-:109190007CCB8B5CE47792109E522F3C353F95F749
-:1091A00070077D5FDBB2CE227B089E9F91BD6A4235
-:1091B0007822FCBFA71FEA9622D52E55E139F1D1BE
-:1091C000EC87F03BC1931E2B3D86CF29DB6E8BBB1A
-:1091D000019ED3763E548A4FF63A8F13FC752EE7E4
-:1091E0005798D91D4C8F3715CA21DF83D7E0A9E1E5
-:1091F00061AFFF8E913FB65CE2FEFC72150F33103B
-:109200006EC1FE3C4728DCB6A8F992C6FC6A0FDAAC
-:10921000BBC37570D3F0B01EE186FC2EC62C7BC894
-:109220007F572BA03DD41F1E0E6FBB3C3C7C588744
-:10923000873FDB9C7D2FC2EB85ADA56FE1F3E7BED9
-:10924000DBA2105E7B773C34A71FB82587F07974CA
-:109250007227F485DB8962F70EE40F331C3E23F19D
-:1092600059C037B47BB7374DB486C66734FEE8B40F
-:1092700086931F17F72FADA1BCC2FAB235C41FBB2E
-:109280007AF863B71DF3102F953FE6CDE5F7FACBDB
-:109290006BBE7A6506C035AFE604D19F11E88FCE6C
-:1092A000ADF68441CDC76011202F12CB981FE3C7C4
-:1092B0004398D51725507E02F14D2FE639E3074A32
-:1092C000F57E0AE9D5BF09441C4C3024011FC7DCD8
-:1092D000A92B490EBE5934B92F9F6D2F3390FF67CC
-:1092E000BBEA1F2C5BE03A8CEDB4F8D66E97F276B1
-:1092F000D1F7F36B1F2F0AF21776C6B01EFF1A7E46
-:109300001F3CAF669B807928436A6F25F99058A669
-:1093100030940FB7CEE67462CC9768BF7DFD6DDDEB
-:1093200079682774E28DF62CC2838F110F3A6B9EF9
-:10933000243CB87215F78F74D69C8B0B8F073511B0
-:10934000DFCDCFB83D444E7A6BF8774C3AEDCAEB9F
-:1093500019978107CB543CD0E424CA1BC427635916
-:10936000E051F4630F017C88484379C9F9B108F2F0
-:109370002A0AF623F6E37FD4E8A10BD6661984F710
-:1093800084F5F900D5B4EE7365B9FEA903ACEF928C
-:10939000F300D4B864BD1A975C5AC3F3573BD77D2A
-:1093A0005580EB3D5706F601C0657B9983E1F9CD09
-:1093B00002C52A600B9EA74FDEEAB0B909BD71480D
-:1093C0002D9E7FA2D8958AEF67004E25C5625EAFBD
-:1093D0001AEF19A67E075A87FF80E7A3E6925F4E31
-:1093E00022B9A1F9D119EA8D76C46F6534D64F3010
-:1093F00057274B84DFEEF1586EDF7727E52FF4FA1D
-:1094000007793EDCF7F66F459B29BF52F36F79ED84
-:10941000DCBF55C10205685F531C01F976AB85BE00
-:10942000D75029C866F2AF95B895B9A4F7B8281FE8
-:10943000D6BDC02A911F6CD5AE64E417E58D22C954
-:10944000EBFEEC92BE7476997C46A5BBEFC067AE8E
-:109450009F7B697C6631EE2F88CFDC30F77BF099FB
-:10946000F78B42F90BEA9D75304F9E4A4F3DFB56F4
-:10947000E3F818BF8AC80AD247D5FDEAE9A88F5E8B
-:10948000FA7F1F5DDD83700D43571BF1FD65D055DD
-:10949000EB45E8EA413CCF20BA6AFF17A5ABA72FFE
-:1094A00085AE94B92C344F3A8E7FE7795C9C81E786
-:1094B00059FE1FCE931EA3DAD9FA3C69C6AAA95C4D
-:1094C000046743E7A396E74D6232C6992CDB5EDE64
-:1094D0003456E6E305FB3B99CECFC9747E4DBD7E85
-:1094E00017C60F1AE2F73CFCD4EF0E8F855F9F7E04
-:1094F000F6BF49AF7D7BA640F7C9E78DFE6A3FEA1C
-:10950000A0C51B97A9F30CECF7FC67FB39F127D832
-:10951000AFAADF5763D4DDEABD81CBF37332C7ADA9
-:10952000F47DF3F66AE640B85FCCEFD95ECBF3A6E4
-:10953000B5BC66D74B950F2F9CC4F3E9D0EFA9F7C4
-:10954000776AF9CAF5B665A4E79F54ACDC1FABF3A4
-:10955000772E8B936FA17B8C7DFD9D91F3FE01FE99
-:10956000CEDBE7C8DC4FA3F37B96CE52E2E70D904B
-:10957000CFD019E360C8EFF26C3E01E3B5EC4236A0
-:10958000F97586D802F47DADF29A1CD2034716BB5A
-:10959000D3701C637EF7E72F4EA27C03070EA5E76E
-:1095A000CBA067A6CFA33CB67F8E9FE09FE5E7FBED
-:1095B00068CEE5DD9FFF08E13D79807BF472E0B184
-:1095C0002878FF789D9DBEAFF5FC6C59CD3FE84EE5
-:1095D0006981FA77EF3A7310FD13BE3603C3FB6D52
-:1095E00097EA3F6AB8885E6CD6D9475B7AF462DF47
-:1095F0001B5383F4E286F5CE7DA7C38CA3E9C5BBDC
-:1096000074FEA3721BD78BCB6DDD26B40FCAE3BFEC
-:109610007E05F34E8D55AC03E5E210A59AF4E144C6
-:1096200089513EF1FF8FCBB37F685CFEFE79A1715B
-:10963000F9096A3E0AF278FCFE4F97E6479DC6F5A7
-:10964000868D466EAF78157817268EAE8FCB0FBFFE
-:10965000B087E2F2ED7BAD748F6FCBBE663E5E0EDF
-:109660009330CF3C99A9FA5A11F797EAF58FC74D75
-:109670008A356D12E2BB81EE13E23D41F28BECB50F
-:109680006E437FD3783BCFE7CE7D67F14ECAE7D6F6
-:10969000F443D043492F2E0BD07799CA250723BE18
-:1096A000133FCD4FF1F15A81F06BD93C4E6F4BF324
-:1096B0007DA41F0E2993047E4FCCC3EDF8541E7772
-:1096C0008E44FC82A662268FFB4A474407C69DEF64
-:1096D000C3A6D3F1FE2AE3DFAB986EA0BF43D12E21
-:1096E0007427215F6E1594647C82CE44F71E9F8D93
-:1096F0005106E3DF93AA4F31D0DF933A54D09884D8
-:10970000EB6BAA6B4D42BDF015D52FDE5AF009E583
-:109710003F98C6833E9846CFB07F77F4C1F982FA6E
-:1097200077043B92E87B08ACE543C2AB4C33E37F64
-:10973000E7C7E15F8EF474DA46FAC203828FDF1363
-:10974000B25BE93E5ECB18737225ACA7D96E266D6D
-:10975000C23B66E6913478DF9C2045631CC09B9633
-:109760002EA1FFC81BD3F83AFA419AD3D219E6FBCF
-:1097700037954DA1F879D3056030D0B37EECA8774A
-:1097800027C3FB8D4280BE1BE4996E60984FD8368C
-:10979000666672F0BD4C51D2CB4907C9055136D02F
-:1097A0003D3F518D678B7DE2D9A1F1E949EABE6564
-:1097B000D6B288EE81C69B25DC6FF998920FE99EA0
-:1097C0005BBC99F282CA4D8C7FF7630CA373D1C343
-:1097D000AF7E7D685CC1680B5DDF460C4C531EF6A6
-:1097E0009695881F0D0853CAE3BE7725F2A5869E7D
-:1097F000FA465E8EE0E5AFE7D5AD44392833FEF793
-:10980000491A3279DE65794209F1E1725320EC7729
-:109810007E2FB61E99F914753CF63F39DEC631E647
-:1098200045BEF1171FAFF75C407DFE0EE36AEDF415
-:10983000E3EAFBFD4FB5EF6F9F89F3B5BC7A46793C
-:1098400010A422AAF7D9504F36AAFCB03E778ACF8F
-:109850002F233FF070BA883184CDB3ED9F3E82C68E
-:10986000E749BDC46F697CFCF64C4DA11FF923BECE
-:109870002F49EAA59B9EFC0B753CA87A15E5C3D63B
-:10988000F942CFBAA5C1BDE3FEA62CDB8F761CD86A
-:1098900019729C230CFDA9791AD43E8DF26D283FD4
-:1098A000868D65C447B4F646755E7DDEC66E152F9F
-:1098B0002E376FE334EE6112C91AB207BDBF6DA136
-:1098C000FC25861FA342FF5C9644F7E1EED5DAD96A
-:1098D00019D971DA3944B0DE1FB4D392B482CC46C0
-:1098E000E23DC38DA327D0DFA77C74F7833FC1FC83
-:1098F0008DCDCF6CF8233E23474EB87FDA24BC478A
-:109900006F70A8B9D4643F69F934B67FDBFC35EADF
-:10991000A9FA7C95C6F12B5AE8F882CF311DFF2EAB
-:10992000B2A0A07FDF62B36DA7EFF95805B21FC4E4
-:10993000871269FD4995A1E7DE2E281FE077FF3CDD
-:10994000F709C447231CA1F9377A7BA3A9E75C4335
-:10995000ED940784F071EFD7E6733923EAEE89B608
-:109960009A64FA8E6DEB46112399AC759D85F8D9F2
-:10997000EFE72F5989DF19BF03191ED4B75F63A61C
-:10998000BF6BD56E97AE5B8465559E6971E607AE79
-:1099900018E50BFEFB47AFA29C85F95AAE31933C0C
-:1099A00060C66ECA63D7DF0FEF6367E9F0EE6278D7
-:1099B00076C3FC5835DFC04772A5C7BE1F6DE0F700
-:1099C000A0471BFE25EE41BBE787B7EFBFEF3D6821
-:1099D0008AEB25F4A55F2DFF6F4354EA62DC7FC359
-:1099E0002C337D2FEE72EDDED6752B495E786E65D9
-:1099F0008E0C47DFBC30D74B23097FC42691FC7106
-:109A0000BDF8C5EDDA5FCC33F5FC9D166B109FD425
-:109A1000F2821E52EF153FE46AA4FC19AF93DF2BCC
-:109A20008E685949F6722BE8619857A5D9C727A7C0
-:109A3000A54F1128EF47F1E0773D4EE6AA79415254
-:109A4000687E0B53F3FBB4F95AA7A5D37C5EB4C769
-:109A500007C003A353CDDFD38DD7C3AFD1EE0EB272
-:109A600097C1EEFEDB7CD8DFFD36073AE3A0FE654A
-:109A7000AA6793622FE91E6817FE0AED7E50AAD0EE
-:109A80009F48F9DF0A551CCD00800000000000004F
-:109A90001F8B080000000000000BAD3B0D7054D57B
-:109AA000B9DFFDD9BB1BB29BDC0D9BB8C1106F02A7
-:109AB000D1203F5E304913C572F303244AEDCD0F28
-:109AC00009BE01DEA26871ECD4ADB5BED03ACDC5F9
-:109AD0006C4888084BC4065F1D8D54FBDAB1D5D4A1
-:109AE000D7D7878EED5B90E7F84FDADAAA333E1BC3
-:109AF000D1F2FA3A9D37E96BB1E98C2DEFFBBE73D9
-:109B00002FD95D36809438E3E1DC73CE77CEF9FE51
-:109B10007FCEB655D53AF91180E350080AB61F85B5
-:109B2000CC35610078DF6706CC2500A7E86F1540CB
-:109B30007FD20729EC836A0260BB0E263775E07C72
-:109B400058E88327B15122CBF9FBD690ADCA4180AA
-:109B500012BB12A078667D1BEC57EFC2F1AB7C63A1
-:109B60002D500390D80ABA834BB684922AF5570336
-:109B700038801BAF351A031508B7F505DA086055AC
-:109B800078240232C0B2E70F94C5687FC7FA7975AE
-:109B90001DD054FE5BEC9FB09B717DFF1B8A791F2B
-:109BA0007FD10FC770BD1A5560182148CFAC8C4EBD
-:109BB000E279D4E089F7A000E0BA29809680587B4A
-:109BC0008AE04F07A0A57AA6DF8890D3FBCD81D28B
-:109BD0008CF9ABF58A8C71052C3325E1B9A38B3256
-:109BE000E6856A6B743A6F9BB13CE3FB0DD50D19AA
-:109BF000EBA1453D3E89FD95F8DFA94A8227FA3C55
-:109C00005E01105C82FDB4F52AA4F571FC1A3B14C8
-:109C100039B1183B9F81CF9C52882EE60620BA802E
-:109C20006C3E897829793E30998FF803CB32222512
-:109C3000880F1A3200BE6CE3E25AEC074FC884FF6B
-:109C400047F271EF52C4B33E29139D401F97F83B72
-:109C5000C0F830223BAA5A3C0FA2A02770DEA5E034
-:109C6000483AF6435148527F3E24793EFE251F6C08
-:109C700040B60888F5051D60EEC5F1FC258E24610F
-:109C8000BFA8154C05E105CD0989CEA9E37A05F9F0
-:109C9000A01452DC2F6B85897E866FDD47EB4B7BF2
-:109CA000411F2825B00E8F8F6D0487CEF33898E0C2
-:109CB00057081F36C002000DE2DC5E064611221175
-:109CC000BE0DE60AEA57C1242115A93A2651FF1212
-:109CD00018D7A90F90027B2936936AF84480A70011
-:109CE000F1A9C7AFD92DED74C2A30B4E1EBFD1DAB7
-:109CF00066237F77DF545B180BCEBE4EED7D71BCC3
-:109D0000E5EA99FEB76D83E542ED5DCBF2A2F6BEC2
-:109D1000C4E3476DFB2B36D26319C20FACF8F4F8DD
-:109D20005FA6097C2624301D9C9F78EEFAE8161C5D
-:109D3000779E0B985540F8457C125FD407A65E6964
-:109D400010EB891E11A407E1BB6809488483F9441C
-:109D500007FCAE211D76311D930CB73C0EE60E7745
-:109D60005FEA97221D882E63A0CF21BC2AF14F47BE
-:109D700007FE4338971C0A3C3E2C1176912E0B2E81
-:109D80000A5DBE752174C9A607DC3B17A0E16CFB18
-:109D90003A4CC76F49A93C69019105E983F7919055
-:109DA0003E84CF28087A680026E12917FEA99F572C
-:109DB00003C67DDC17F3899E4EC30CFF1722FF8B71
-:109DC000BE90AF30D241F4059D22242FD88FDAE324
-:109DD000BCBE682BD80F94123D2C469E0F62DCFA55
-:109DE000614AA2B65232995E0B145BA67EBE9412F3
-:109DF00048464A923E28009DE9330FE2DC467C53F8
-:109E0000874F91BE0ECA634E05B5CF36D23EFDEBED
-:109E100050C390CA0F8D34325FDE0E7A15F25DB9F1
-:109E200066B1FE2EBF52351D231D5FF7317C30AC6D
-:109E300003646FCAE5100CD7CCEC9BF099D124D207
-:109E4000EB58E8C491187E9F53AA80DF9CC1F37140
-:109E50009FB81FC1542E257910F211ADC7B384CF1E
-:109E6000D46F5155F06D701BE20FF1B19906104F90
-:109E7000D2D0BFF3F7479A85BEFBAE1DFB88F885AD
-:109E8000F413E3CF029DF4936E02EB4DD9707E4341
-:109E900076F1E490DF203E85E4A815C07DB6B8FBDE
-:109EA0006C19F27F2015A4DD33E18794A79F2B69FD
-:109EB000BD5DC8FC6C4A10A83BFF7517CAFFD05B9C
-:109EC0004CCC764EBE6D7C6665E1E492D9E76924A0
-:109ED0001F73D3D7093A6911E4A7208DBFC4E3E704
-:109EE00082E3EB3D9C21671E1C5FD46638BEDEA377
-:109EF00042DEC86E213D6F43BB358CF8FE474BD721
-:109F0000045F4EFD27D9F39BE30526D9734611CE96
-:109F1000BB25298D0D233FDE0A718DF85482850EF5
-:109F2000D16FB32399C338A572D7D602F617A045CF
-:109F300027FC48A96B95538B3F051E5D3C6D4EFD7C
-:109F40008FCF08115E43F0A1375E3933FEC78D0B0A
-:109F50008ED51AA4B483D544DF7C97BEA8899CD73C
-:109F6000F09CBE4F0A615847EECFFFC61BABF07C9A
-:109F700003BF504CA582E6696021BC3920EC783ED5
-:109F8000C9E902E297F1D41DC46FBD853ADDD79BC4
-:109F900007EE3C076216DD331FF500C195F37733FA
-:109FA0007FE6176886C2CC8F1A27FD1E01E4BB121C
-:109FB0004635FF156BA914C9577153C0DC91095F71
-:109FC0003A45EB112694B8F790CEDC7F29F5033C97
-:109FD000D478CADDCF0AA4ED97D5F745D3FA20C6C9
-:109FE0009DF4F9A606A934BC9E961757CEBC7307FC
-:109FF000835AA6BC64ADF3E8B1C427F8635E198C3C
-:10A00000EDC0F30E0D1D6C247D335A0C861F8706A0
-:10A01000377F47029CDF44BA98EC4F0B8CF925DA66
-:10A02000C718AEC6BEAF2CC8FC73C96FEDD41D08EF
-:10A03000E70BF57EDD409CCCFBBDA537E2F86D65F6
-:10A0400001D342FA26DCF94E0BFA5962FB5F915FAD
-:10A050007AAB7B5EA605CAE1BDEDC2CF52C35D3BC4
-:10A060005FC3F9FBE629A0905E53369A649F6E5554
-:10A0700001E616617FBF8FFD3EF4EFF83EFE964C81
-:10A08000BFEFB6477C197D5F969FF8F576F403899C
-:10A0900068AE1F38D00EBC2F9D67EE8ABF1F3E04EE
-:10A0A00023AC3F97AA13B29EC3AE7AF8979E0932AB
-:10A0B000FE7F528C78A575605B7762DF8F78247E97
-:10A0C00045455D508B78B2E89F06F9C93FBA8BE6EB
-:10A0D000FB4F22FFD27C25D87227D1E152174F20A7
-:10A0E000CE65E17F74EE6C7FD89FE50F679FDBA3A1
-:10A0F000C3631E7EEAA08EF083FE39FB07DEBDB28D
-:10A10000EFF3421F6A0EE4A59FF605B84DF5E9DCB2
-:10A110001EE98B727BB4CF801674AC5EEAABE6F6B8
-:10A12000E53E93BFBFDA57CFAD878FD9F44DA8581E
-:10A13000667F61DFBDF2180993BA447FE50AE2DB6E
-:10A14000B714561F3A1879EA02B643A0E2BCCB5ABC
-:10A15000D5318BEEE2C63F97B87CB6D83F75D88F25
-:10A16000EB92A560DE470BD16E6FAD99897FAE9BF8
-:10A170009267E40428DE9933636780E29DB919FD94
-:10A18000E6C0A519F357EB0B32C63DFA3ED628E4DC
-:10A19000666D7471C6FC7D2D4DA92F905FDFE0D7F1
-:10A1A000159DE29FAB33C66FA8BE36031E28EB4C4D
-:10A1B000D2D3451BD3E8C6F7CFA4ABB6EDEC719074
-:10A1C00047E7F7DA33E3A1D9E89BCDB71E5E8B4EA4
-:10A1D000E355C495098A2B0DBAF712690B82DA731D
-:10A1E000DA2FB1C00ECDECABD6637CB9ECE2C797E9
-:10A1F00005145F56E48A2F3FD2897FCF195FB66678
-:10A20000C6970559783B577CA97564EA95F3C5E76D
-:10A21000E6F2F81BB514EFBDAEB01FA8B4C6D9FE68
-:10A22000CD9D50CCB508B7D8F5C74224F3386F732D
-:10A23000ADC6FEE53E988C92DDDF2B215691FFE7FF
-:10A240002E314B49DF3C1DB64A6EA238BF4D360F4A
-:10A25000E292171BBF1925BF63D78EC7A36894600E
-:10A260005187CCFB261B4F6C22B9520DF4E3246EB0
-:10A27000ADB11CFE8937FFAB033EB6037B37696384
-:10A2800012CEDF1BD2BB3750DFDD0711C2F676B42A
-:10A29000F6F231F2FFAEEC3004BF801325FA3FB87E
-:10A2A000A9AE948D948AFDA534DD643B3E1C32AD8D
-:10A2B0005B887F7E1304073F3D20E90512D98B4D53
-:10A2C000B2FE24DE73B475C5BB5BB1BF2BA8992465
-:10A2D000F089705D29F197B219DD1EEC8FB48EBC48
-:10A2E0004CEBD52A99FB894D971F23F779B4586F0A
-:10A2F000ABA4386F7525611A94439FF4515E231106
-:10A300003E11A5F5FDD788F5B3D147D1D3EC39700F
-:10A31000FE82CFAB2C94531AC2515E38F15782A7FC
-:10A32000A4DB71D6E3997EC57058A32001D6FF7CCB
-:10A33000E1F71C9554B965111D4751E6094F9B374C
-:10A340007514523CB5D937599CCB5E0CA07E4D5D3F
-:10A3500091E66F4632FD846CF8FC5747F8C53F59CB
-:10A36000748D123774C1BFC48D6BC652843748B622
-:10A370005652DC1B147679363CA8C14C3C78F01957
-:10A380001EFE4FE9CDB3F2D2F080D74A91BF73479A
-:10A3900087C4F4FF22F141AD3806C51DDEB9D4569D
-:10A3A00099D779FA01F978C338F1878BF7289A0C95
-:10A3B0009243EF1C5F75E1DD739AAF706A49DA3939
-:10A3C000566A2E3C93E3E2AB342157F02BC57CD286
-:10A3D000C84127D77FE3F51533E3AA7BFE2B0E6830
-:10A3E00019FA7788F6C77BBCBDB1F3ACF1F2A2B124
-:10A3F000CC75DFE9003EEF958A75E404F95257C841
-:10A40000634F22A8C557C82CCF27D1FF22BB361BCC
-:10A410003C8FFE2C6225CC5D407ED9CE4807F3F9F7
-:10A420006CEBB4B109AB6219ED0BF171E4AF45D13E
-:10A43000CC7379F3BE73FA5E5F8139741E74C8C938
-:10A440001EF9C75216E9693FC291B0AD7EFC6EFDA0
-:10A450006CF7F6431A7CC4E74792D0574E18F8BE03
-:10A460008977C7587EE0D0D48724DF894525C63058
-:10A47000CB0B4417D6913F22EEE5CBA2D3709E8042
-:10A4800033B25CF8A9236EDF592AE042BA9CE2FAA3
-:10A490003C37AFF242C702C6BB467A8688AC5AE563
-:10A4A000C41741F5878E8EFC3027B80FC2D8FA2327
-:10A4B0005B1C6A57951B7BEAF15C238B64B66323B4
-:10A4C000A1D8E303A487160573CAC76BAE5E1C222E
-:10A4D000BEE5F8092C99E44EF284046232D26B9402
-:10A4E000391FE0FD8EB0C867E9C9FA9B118F6FBBB9
-:10A4F0007C81F7E1F5D9F0DF3D13FE13C4AF0917F6
-:10A5000038C1D982707EEDCA0590412971E33EDCE5
-:10A510002F6024EBC95F98ECD0C5B8BADCA4FB8FE0
-:10A520008473EF37E9EE67C97189E65DB251AC8794
-:10A530008058B7579ADA705CD093E589F6A7F17C1A
-:10A5400033533F64C3CDABCED4575A59E6FCFF75A5
-:10A55000F92F3B1E7A40CA7DCEC24E71DF55E5C051
-:10A56000F688F8E2BE1C7C912DEF1AE53F11EEDF74
-:10A57000880EBC9FD03B4175A229BF86EC3B98FD5D
-:10A580008CD8C37CDFFBF26FE43879E00691E7D02A
-:10A5900054A1B7CB362018B4C7F64F5A1CEA2B7714
-:10A5A00083EE0F9F89874F1BEF91BD71D2D6873BFA
-:10A5B00081CFA9A4C781788FA4CFB891F64DEE5270
-:10A5C00080FC80E476FF865C76BBB8C3E7E95D8EED
-:10A5D0006B55972FC0AC0019D71F784BE1BCC081D9
-:10A5E000FA9D1C17276CCD902A284FF1086CC7F1F3
-:10A5F0003F5A32FBADBD87EEFDF5ABB8EC784B654D
-:10A600009D24B31CC1AD38FF38C6C5E43793FC6543
-:10A61000E46310B181BA99FD922D95BC5F02F79366
-:10A62000CEA2E7541BE3D66567C23B6D8FB3F2231E
-:10A630000325B1DA4EBCDFBEA0A8B3285E7EA42BF2
-:10A64000725E791D0392A95ED22B1B81F1106A1BE9
-:10A6500081ED944F888A38E348AD5FF0D776C98D95
-:10A66000CFA0053C3D857FEB361A0FCF25FBF28E40
-:10A670001FAA70BCE9A9D755EA8F94CA75143F5F29
-:10A68000A54DDE7F158DD7F9587F3422255319FC4F
-:10A6900091F2CB513E8FE6B68A685312B5CD81FC5C
-:10A6A0000C7DBD5ACF8C3FF64C1F510A893F753047
-:10A6B00025C4F39E46D32A24DD634EF6D3F73DAB83
-:10A6C0000D73D8207F38334ED9D3A6097D5A21EC9B
-:10A6D000CEC861E361F2AF067BF3D8FF7CA04C16D5
-:10A6E000F75E0863C40F6D46665C33325EB96B215A
-:10A6F000C959D2C7F9F2EF8F8BF95B772C1FA3B83A
-:10A700005477FDD5ADA54DEC87C280987743F5E22F
-:10A71000ACFB4FE8C417C9ED3E20FC0F96DD3C446E
-:10A72000F9D00F12BEAB495C5EED3432E2C22D03AC
-:10A73000B7729D6840839BE8FC7B3669CCFF7B8ABF
-:10A740003F38700BE9E9E2398CE7D14D5A692C4D5D
-:10A750001EFED6E9673918DD24FC8B621962E339E5
-:10A76000C6FFD629F4D0E76E07BE4F01DA65033F76
-:10A77000196A3CE5277C9401FC335D27FAD1437CC0
-:10A78000FF5619AAF08823918DECBF65F359B0AB41
-:10A790008AE19DB68FF572061E7D7E3BCE79EE1B5B
-:10A7A000C0207DD5D28A7D8AEF376A40FCE68FDEF5
-:10A7B000CDF72CC27E1EF603AD4947C57E6061EC25
-:10A7C0006AF25B5FDCDE334479167F44D689DFFCB6
-:10A7D0001B6FB33B697E8D0FF2707C000C294AE73A
-:10A7E0007424207D6D40AC95FCF591A8AC53DE66D9
-:10A7F0005D62FD36DA7F5D640E109D37B7C9BCDF40
-:10A80000494BE3A45531391A94FF2A09B2DD7DDFA3
-:10A81000177FB807E7BF8FF47260E65E873A2BF9BF
-:10A820009E794666FC1C8024DBE195D6C446DA6737
-:10A8300065BD46150D38D270E200F9EBA3B57ED3A5
-:10A840008FE71A6D9018DF1FD7FAC6F0A8F0536D86
-:10A8500042A17D7FFA31F246452EF93DBBDC64CF43
-:10A86000DF53DF11207ED809135D841F675A66FB12
-:10A87000953DAFA14BD07F27E285F0ECE079AB2886
-:10A880002E9A42B942E8E169FBBBB760FBA54E9541
-:10A89000E77DB55476A82E34D8A6B19C0C866243C9
-:10A8A00015D4477EE7782812637E1E298DB01C7A66
-:10A8B000FB8C34745713BFBC519BC77EFB973B4F37
-:10A8C000DCEE2C44FDA1FCFE5F9FA1F8A94C637A4D
-:10A8D0000EFAECD4ABC4D76DC25F3C3AFF1E96BBF8
-:10A8E000818D3703E10D9CF83B54B71AA86960F8D5
-:10A8F0005EBE6164BEC8270D44EE7228BF91AA17E0
-:10A90000F905ABF820E7F3BCBC52A3ABC716FBE3D9
-:10A91000AF54D1BADB55511756CA12A40FFC945745
-:10A92000A2756A66BEEBBAA9CC38785E561C9C9DAF
-:10A930006782C0C4C24EB4A7BFEBCCCC2BD1155894
-:10A940008E6BFC1C2F8ED68B3828E98B97EA4BCE6A
-:10A9500094E3375D3F78A22F801C00F0F33E9DFB0F
-:10A9600005D61F76CC45506FF545F9FBE7573E2ECF
-:10A97000A5AFDB53B33E60B0DE988C12DC6C7D91EA
-:10A98000CD07BD9D7398BE18A701D177CF14307E37
-:10A99000430D2B52C4A727FF041C877EB6652208EF
-:10A9A0009567AE4FD139FD94FF12E73C4AE7F45367
-:10A9B000FE4B9CEFE53E83DB57FBAAB95DD3052236
-:10A9C000CFEFE983CB501F20DE5ACA449FE49FECAF
-:10A9D0007051E4669BF8CB1F557592EF40593225B4
-:10A9E000A5E983D150FC5DB2CB83C541E6BFEC73D2
-:10A9F0005DDE25BB762F7E13C1DD837009EF2F6EE0
-:10AA0000FFEF8716D03E6F29CC57451BBBB7B1DE91
-:10AA100041BD90C7FE86D087C9E220E71D46B757E3
-:10AA20004951EC6FDE211CDD73CA3DEE3386EB8E9F
-:10AA3000A0BEA6FE20CA39DD67B0E1833B689F8FC8
-:10AA4000FF32872A7C48EF5FB1DCBF8101C8DC8B15
-:10AA500028F79E9CBDFE8B43DF233933C0EE39249B
-:10AA6000EECF7A70343491A4FB0FFE52815C78BB38
-:10AA700050BA82757E7EC8983A75F8542447DDD066
-:10AA80001275C3FEF11F71DF59075085FD477D56D2
-:10AA900080F8E0D11DF259EB868FEE387BDD706CCB
-:10AAA000BF0C7E7DE61C97C224E7592984A73AE0B3
-:10AAB000000D617B4357EC962EF623455DD168A0CF
-:10AAC0009C03F5F539E43F1FB5ADAD3C1E2962BBD3
-:10AAD0001F55C75364D7A3542F37E8FD82C3754F62
-:10AAE000CACFD2FB85ECFBF7FB269BF87E3885EAC4
-:10AAF00095D9F54929F86351DF5F20EA905E7D72B0
-:10AB0000993679F07EC2D34D01C643FF73D7BC435B
-:10AB1000F52FAF8E1F75EBC0FA36D077887BDCDB64
-:10AB20004571D00BA21E0AD7E03D96D3269395ED32
-:10AB30004BB9BEB983EE71AEF39F6FDD709DABDF95
-:10AB400090B9C7489E7FEDE2D39BF74D92C75AF26A
-:10AB50001345DE1A0A34D6F34D4F0541217F39A43F
-:10AB60001D2439D90293AB499EFAC3C26F4BECF353
-:10AB7000B1DF36DA65F03EC59AC5EF178ABF966732
-:10AB8000EE403089C37A01E591AEE9B446BBF81CCA
-:10AB9000C9AE0E3AC790C2FAEEFDAAD5FC8EA94DF9
-:10ABA0002A64795475AB3C5D5F1EEACAFD1E695587
-:10ABB000F95407EF1F9281E2AD449EF9B241F8FECD
-:10ABC00089CA70DB40BC5782ADBA3484F7EC0F1EE3
-:10ABD00067FAACAAF22F27FD74C8B5AF8950EEB85A
-:10ABE000EE59171FFFD01EFB21D1E17A986A26FD8E
-:10ABF00086A26D3AFCAE45C46B87485F8A78F75EE3
-:10AC0000B96E26AFF5922F7688EE6B7D5FF813FE56
-:10AC1000A8F0EB3152E37CD007EDD67304771DF139
-:10AC2000790D2B2A7872790E3977CF714797F51FF6
-:10AC300004EF98BBDF32DDE2BAEB3290CDFE485A2A
-:10AC40005DDD38BFBABAA4FF58D4D3AF157C0C2F42
-:10AC500038820F9B40277942FE3B46E7F3DE972C74
-:10AC60007B7E5B05D75D2EB0BE9DDF61BD4DF04E96
-:10AC7000D9F6BBD4BEBFBD0718DE79BED758551E66
-:10AC80008FDA48A7C13CE1373FDD686EB0D3F23FB1
-:10AC900073D60B7B3267BD88C717233B4D88776F10
-:10ACA0006CC72F87FA00D12B1BFE401F8C531D68E9
-:10ACB000B6FDB55D7705284FDC5FD614A0F768892F
-:10ACC000605321F507CBAC28ED3FD0D7FADC4755D0
-:10ACD000C44782EF9DF9221F9144FDECA4E5494F42
-:10ACE00075297CAEE63248513EDD1F147E911FE38C
-:10ACF000456329F9CDF56CCFF1FB38A50EFCEB0DC2
-:10AD0000116F5B265841728340227CA18E3CBD9E10
-:10AD10004C5E73591CE85CB3C1515A703DC5A365C4
-:10AD20003AFB2157AED7196ED89267E278387F7C0C
-:10AD3000ED3B07BE8ACE812F6F9E2777D978AA5C1C
-:10AD4000AFF0F95E0CDFC3F7824F9A59CEFCA8F042
-:10AD5000A89E5FBD5EE8192568412CC4E1BF44F898
-:10AD600049D0039B2533F8455F91F1ABE8715EE76D
-:10AD70002F3321B694F0A14B848FECFB2F7BFEBBCD
-:10AD80002D84B757B608BDBA4A75F5471CEF82FC4B
-:10AD9000B9D3D56FE0DAA5B63C6177D6C1CF8222B0
-:10ADA000AF2DF87419BAE381A233F5ABD73EEDE6C7
-:10ADB00095B3BFFF6E7D9EF0878C71D6EFFDAD021F
-:10ADC0007E2824FCD083432BD87F58535A35275DE7
-:10ADD0003F5EEC3A61765DF05C75C019BEB10274FD
-:10ADE000CE3FEA7739EDC6ECFC713FF18F8FE42658
-:10ADF000C0ED19E3E576D424B99A6F398074DB1974
-:10AE00008E47897F060E6F7F87EA24EAEB8A49FE28
-:10AE1000A6AADA40F3D614C7593ED696594075A56E
-:10AE2000FBFBAC1FA6C31D6E8F6D5B4FEF84F471EF
-:10AE30008BE00421E5903DBA7EAE15B773D0E16E8C
-:10AE4000577F7CD06E7F693DF2E12AD29D2B007E38
-:10AE5000695B7752FF7CF5D599F2D41A20BD7FE16A
-:10AE6000F2D411A0FB0D96D9FC4E6BF0670A79580D
-:10AE7000A7E70DBAF23438FF1E88A5C9D5EEF559FB
-:10AE80007A27E2EA9D88C57231E2EA1955B7593E40
-:10AE90007C244F4BD2F44CC4D33316CBA31AF1E429
-:10AEA000C9953F92A720BD0F9E6A263F6500C43B0F
-:10AEB000C66CF9FA7E7BEC61A2C355C5FFD7596118
-:10AEC000CCBCFF340C214F83652EBFCF7F96F9FF9A
-:10AED00024F23F3D16EE0F5666F0BBD7AE9C5620CF
-:10AEE00085A4B86E5AE2F6B3D3F9DCAE9ACEE3D6B7
-:10AEF0009A9ECB6DE37498DBA6E94BB96D9E2EE567
-:10AF0000B6651AF9FE6AE4FFE90A6ED74C2FE676B9
-:10AF1000EDF4226E5BA7AFE6796DD3CBB9BD7EFAB7
-:10AF20005A6E6F986E10FB504DA82827FF5339EBCF
-:10AF300022F0BFE9507D74E0F0EDEF107E7CBAC6E0
-:10AF4000799444B88EEB3D3E35CEFC7FB04CE8F7AB
-:10AF5000B541419F6CFEFFA03DF632F16D36FF8397
-:10AF60004FBCDB52E9DD560DFB396F327F9FE1EFBD
-:10AF7000BEF417CA83A2FF718CE877A1F6FFB45F15
-:10AF80005992E9570E1667FA9503F33DBFD23F4633
-:10AF900075B0AD92C1EFC4F23B621FF2FE606FA1CB
-:10AFA000F1585740277F2A115E130D627FF34E053B
-:10AFB00028DF87FEC56F781EEA07B21BE72BAFBFFD
-:10AFC000B4851C78F397C17139FE29FC93F7E99F8A
-:10AFD0000D67CAFD6CEB3CB9BF1CAAF372D9D9222C
-:10AFE0005FB3907B5DC87DA2CC1EA27C4B224BEE52
-:10AFF0003D3B8A78C890FBFC6E57EE5D392E8A88FF
-:10B00000771F4524F7C857E16EC3ADFF64DA51D509
-:10B010009DEF6B15F5ADE688D0AB6AABD017AA9E55
-:10B020006947916F8ABB73F8138E2AFCE3B6AA7F37
-:10B030003B6DCFC8AE1645C252216EADFF69D2A19D
-:10B040003CD6617501CB77B61C25F415CCE787D5C6
-:10B0500066C825FFE72D4761CF8E586C47B2E77968
-:10B06000F23470B88DF1E2D995C3786F2BCD9EACD8
-:10B07000D5051ED09EACE8CE614F56955B313BC7DF
-:10B08000399BBA855FFADA75B6F017D14F243F25A0
-:10B09000E1CBED0734750BFFA7A8D5FD7D8501F148
-:10B0A000B9A8075B5B53CD54C340796EA2FDAFB323
-:10B0B00026FB4906FB8323113A3FCA6733D1E1429D
-:10B0C000E5B3BA5DF885D03B97FD16AF3D17DF7B42
-:10B0D000FE8EC7FFD9F39EAEB036E4C2CB0FBA45A1
-:10B0E0005C7370E8D90CFED8A32EB8DE3472EA5532
-:10B0F000CBBC287AF5FCFC8AC368E758AFCEEE5784
-:10B100007C25171FCCE6577CAD5BC49BE8576C27AA
-:10B110003AAD5A22FC8A1F74C3C5F5171AEE627C39
-:10B120005DA8BF30D27D767FE140B7E72FC4596F6D
-:10B13000F85DBDF169FD851CFEC1A3CCBF30A550F3
-:10B14000FD0F516D8A7C88D023A8670ED238C6F1D6
-:10B15000EC2F1C0C0A7EB15C3D734797FD04D16354
-:10B160004FBDF0172E961CA0DFF734C13D5F793834
-:10B17000DF79554FAC1C9A243F0742497A37DD4F9F
-:10B18000EF95287E7C2F24DE11E05128EFFF4FCA77
-:10B190009526D9B9D1FC6F3C46F37B1D15E8DDE05F
-:10B1A000FE3E917FDEEDE6FFF6FBE2FF328970EEB8
-:10B1B000DFE1D70FE2F89FE7143832F2D49FF3CAE9
-:10B1C000C7E85DD031570FF96153612EBE9A399FA0
-:10B1D000789F4B4F574EF1EF3ACA74CE93BBF88924
-:10B1E000683638087FE77C99EB233BDBBF7880E447
-:10B1F000C76917792E2EB4E278645E54E43BD08D93
-:10B20000A94FCB8B28A09EA07CFC10BD514FABBF9B
-:10B2100016DB1847A7C51921D3CEE81B100307F783
-:10B22000D91B91393F3FB852C44583C17840CFA163
-:10B230005F76F565BE53CA6E95454F24E92DF183BF
-:10B2400051D5A4F4E870754D1BE53113BA78B4A458
-:10B2500085653B571D3BDC23B9F97893EDB6FAB908
-:10B260008EC25C76C56B87FA449ED6EB07168E5B62
-:10B27000C49F5A8565F3EF75C211C949CB2FFFDE14
-:10B28000D5133B2533B50A91B63324EC44C0485A54
-:10B29000329E77A0F836AE47060C074ED0F78549A8
-:10B2A000F810DB488916CB5977EF11F1CC4E5F8C43
-:10B2B000F7DB59AA729D726745EEBCD75F5DBDACE6
-:10B2C000859B6CCEFF8755AE2767CF9B72F949D31C
-:10B2D000ACA8CEF1F76D06DD2B311F389739D57349
-:10B2E000E7533B82C49F36E747F6BB79126DDE36E3
-:10B2F000C6FBEE7255A73CDC6A65DD0EDAE7415409
-:10B30000BBE49F64F3817F7E4D1ED73FD7C9FC66A7
-:10B31000339B2FE8EDDB04F9696A8AFD251FBCC366
-:10B32000798BDD3547B86FC084DB17FCE2D59B22F3
-:10B330002E3F9E61275C7A2549AE72F0CFFDE51362
-:10B340006CBF1F6898D840759B602460B6E23DF6DC
-:10B350002DB739BFBDBB5666BF35DFFD3DCE83EB94
-:10B360008AC28497DDB547582F679FC777E415F6E3
-:10B370003B826A8AF317C1B28F389E7DC83DC7DA17
-:10B380007A214F05A6D0C3055D71D071DFE2B79475
-:10B390003103FBD2BC971D1FD50F6E126F8B352D5D
-:10B3A000C57E467EFD1A89CEF766A90212C1505E9F
-:10B3B000E0F7BA600BF9F6DE6597746919F17D184C
-:10B3C000D2FA15E27704E9EFA840D978D6F766BD3E
-:10B3D000EFDD7EEC681ABC9E1EF75DAF5B673BD766
-:10B3E000FA3FF76D3B761495FF83356797ABBDAE9B
-:10B3F000DEDBD357CF74F2F8CBE3B7085D71C5EC51
-:10B40000EBF787C773FA25A33D82AFCFA58F0AFC60
-:10B41000E36CE7F75E379E9187FCBAAB1FBEDE2375
-:10B42000E4482F9FE2BCE55EF79DD3DE3CD8F06C8C
-:10B430008E7B3DD6A309793ACDCF9E1FF0CE85F9FC
-:10B4400001F3BB44FC105991477E00E2F3657AE7B3
-:10B45000F6A78866409A3C0F8432FD50CF0FF86DF6
-:10B460008FF0035E2CFE98ED786130C5763C6866FF
-:10B47000E609B2EDB8E68B715CA9956A9E9EE17A09
-:10B4800057F0ED6F3CE5903E48EDE2FA513EF26F29
-:10B490009E488D3BB9E8044B32DFDD7CB107F83CB8
-:10B4A00011233ED148F6A54BE57AC87EF9BD431F6E
-:10B4B00012BA9271B05DB8C3CCB7BB27F8FD8ECB82
-:10B4C000F7E7A227FD7D52E7FE6E85DE715CFB6625
-:10B4D0007DAEB8C36BE97D55E67BF84F2717CF7B70
-:10B4E00072910779422ED6C903E40FAC93F9DD0AB5
-:10B4F0003DEF55EBDC9423D5FDE964746F7A1F248E
-:10B50000B9F5A40533F2029F17EF5E4E6E13EF6894
-:10B51000F877860BE877A193FCFBC1CBE895AB32BB
-:10B52000A3DF4E42994CF562E788249DF6932EA541
-:10B53000278FA64CEB1682CD6DF6B92F87387FAFDB
-:10B540008624B757C238B74B6082DB6530C5AD057E
-:10B55000426F994745DD6305980A7DAF019BDB3A51
-:10B5600088735B0F496EBF79ED97FE70332EF9AF8C
-:10B570001EB72E7F1A2F02AF39E43B458FFEBDFB6D
-:10B580007B787EB0C760B93B17BD07C242DF369BF0
-:10B5900013ECDF878236EB615F44F0B707C7374BA8
-:10B5A000BEF8EFF5A3B27F67F2FF2B2134C6D03F80
-:10B5B0000000000000000000000000180000000073
-:10B5C000000000000000004000000000000000003B
-:10B5D0000000002800000000000000000000001033
-:10B5E000000000000000000000000020000000003B
-:10B5F000000000000000001000000000000000003B
-:10B600000000000800000000000000000000000032
-:10B6100000000000000000000000003900000000F1
-:10B6200000000000000000380000000000000000E2
-:10B630000000000000000000000000000000000802
-:10B6400000000000000000000000000000000000FA
-:10B65000000000000000000C0000000000000000DE
-:10B660000000000E000000000000000000000004C8
-:10B6700000000000000000000000001800000000B2
-:10B68000000000000000001C00000000000000009E
-:10B690000000001C0000000000000000000000137B
-:10B6A00000000000000000000000003A0000000060
-:10B6B0000000000000000001000000000000000089
-:10B6C0000000000200000000000000000000000177
-:10B6D000000000000000000000000010000000005A
-:10B6E000000000000000005000000000000000000A
-:10B6F0000000000000000000000000000000000347
-:10B700000000000000000000000000AB000000008E
-:10B710000000000000000008000000000000000021
-:10B720000000C00000100000000000080000C00879
-:10B7300000100000000000020000C0000010000027
-:10B740000000001000009FB0000000000000000892
-:10B750000000C08000100000000000040000C0884D
-:10B7600000100000000000020000C0800010000077
-:10B770000000001000009120000000000000000800
-:10B780000000934000010004000000010000934805
-:10B7900000000000000000020000935000000000C4
-:10B7A00000000008000093540000000000000002A8
-:10B7B00000009418000000000000000800009358EA
-:10B7C000000800000000000800009AB000400000DF
-:10B7D00000000040000093980008000000000008EE
-:10B7E000000093D80008000000000008000094202A
-:10B7F00000C8000000000098000095B0009800000C
-:10B8000000000028000095F00098000000000028CB
-:10B810000000C480054000300000054000009D206D
-:10B82000000800000000000100009D210008000049
-:10B8300000000001000020080010000000000010BF
-:10B8400000002000000000000000000800009CD85C
-:10B85000000800000000000200009D180000000029
-:10B8600000000001000000010000000000000000D6
-:10B8700000000009000000000000000000000002BD
-:10B8800000000000000000000000CF2000000000C9
-:10B89000000000200000CF46000000000000000172
-:10B8A0000000600000200000000000200000730085
-:10B8B000000800000000000800009FA00000000039
-:10B8C0000000000100009FA800000000000000012F
-:10B8D00000009F60000000000000001000009F6357
-:10B8E000000000000000000100009F610000000057
-:10B8F0000000000100009F66000000000000000141
-:10B9000000009F67000000000000000000009F682A
-:10B91000000000000000000400009F6C0000000018
-:10B9200000000004000000520000000000000000C1
-:10B930000000000300000000000000000000000301
-:10B9400000000000000000000000000500000000F2
-:10B9500000000000000000020000000000000000E5
-:10B9600000060000000000000000002000009F70A2
-:10B97000000000000000000100009F900000000097
-:10B98000000000080000005300000000000000005C
-:10B9900000009F98000000000000000200009F9C33
-:10B9A000000000000000000100009F9D000000005A
-:10B9B000000000010000000900000000000000007D
-:10B9C0000000000100000000000000000000004432
-:10B9D0000000000000000000000000010000000066
-:10B9E0000000000000000050000000000000000007
-:10B9F000000000890000000000000000000012C8E4
-:10BA00000080000000000080000000010000000035
-:10BA1000000000000000A000071000000000071058
-:10BA200000001AC800000000000000080000AEC0BE
-:10BA300000080000000000080000AE400008000000
-:10BA4000000000080000AE800008000000000008B0
-:10BA5000000020080010000000000010000020007E
-:10BA600000000000000000080000A01007100040C7
-:10BA70000000004000001BF800080000000000016A
-:10BA800000001BF9000800000000000100001AD0AF
-:10BA9000000000000000000100001AD800000000B3
-:10BAA0000000000200001ADA00000000000000029E
-:10BAB0008000000000000000000000000000AF0057
-:10BAC000000000000000002000001B78002800009B
-:10BAD000000000040000E000002000000000002042
-:10BAE0000000F300000800000000000800001AF049
-:10BAF000000000000000010800001B3700000000EB
-:10BB00000000000100001B0F000000000000000109
-:10BB100000001B70000000000000000400001B7407
-:10BB200000000000000000040000005000000000C1
-:10BB30000000000000000003000000000000000002
-:10BB400000000005000000000000000000000006EA
-:10BB500000000000000000000000000700000000DE
-:10BB60000000000000001BC80000000000000001F1
-:10BB700000001BE800000000000000080000005169
-:10BB8000000000000000000000001BD000000000CA
-:10BB90000000000400001BD40000000000000004AE
-:10BBA00000001BD8000000000000000400001BDCA7
-:10BBB00000000000000000080000B00000180000B5
-:10BBC000000000180000C00000400000000000401D
-:10BBD0000000C00000400002000000010000C001A1
-:10BBE00000400002000000000000E2000020000011
-:10BBF000000000200000E204000200080020000213
-:10BC00008000000000000000000000000000E200D2
-:10BC100000080020000000040000F40000280000DC
-:10BC2000000000280000F540001000000000001097
-:10BC30000000F5C000200000000000200000F5C05A
-:10BC400000020020000000020000F30000200000BD
-:10BC5000000000200000200800100000000000107C
-:10BC60000000200000000000000000080000110893
-:10BC70000008000000000008000011680008000033
-:10BC800000000008000011A80008000000000008E3
-:10BC900000001240000800000000000100001241F6
-:10BCA0000008000000000001000040000020000427
-:10BCB00000000010000059000030001800000010C3
-:10BCC0000000590800300018000000020000570072
-:10BCD00000080000000000010000570100080000FB
-:10BCE00000000001000011E8000000000000000159
-:10BCF000000011F00000000000000001000011F839
-:10BD000000000000000000100000124400080000C5
-:10BD1000000000040000400000200000000000209F
-:10BD20000000530000100000000000100000153853
-:10BD300000000000000000010000000300000000FF
-:10BD400000000000000000000000000000000000F3
-:10BD500000000001000000000000000000000004DE
-:10BD600000000000000000000000150800000000B6
-:10BD7000000000010000152800000000000000087D
-:10BD800000000050000000000000000000008308D8
-:10BD900000800000000000800000000100000000A2
-:10BDA000000000000000200800100000000000104B
-:10BDB00000002000000000000000000800008410C7
-:10BDC0000008000000000008000084700008000067
-:10BDD0000000000800060000046000280000046065
-:10BDE00000008520000800000000000100008521FF
-:10BDF00000080000000000018000000000000000BA
-:10BE000000000000000084080000000000000001A5
-:10BE1000000084F40008000000000002000084F626
-:10BE2000000800000000000200008504001000006F
-:10BE300000000004000087600000000000000020F7
-:10BE400000006000002000000000002000007300DF
-:10BE500000080000000000080000000300000000CF
-:10BE600000000000000000050000000000000000CD
-:10BE700000000006000000000000000000000007B5
-:10BE80000000000000000000000088080000000022
-:10BE900000000001000088280000000000000008E9
-:10BEA00000000050000000000000000000008810AA
-:10BEB00000000000000000040000881400000000E2
-:10BEC00000000004000088180000000000000004CA
-:10BED0000000881C00000000000000080000300086
-:10BEE0000040000000000008000030080040000092
-:10BEF000000000280000339001C00010000000087E
-:10BF00000000320000200000000000200000372068
-:10BF1000000000000000000800001020062000388B
-:10BF2000000000080000A000000000000000200049
-:10BF300000003EA9000000000000000100003EC813
-:10BF4000000000000000000280000000000000006F
-:10BF50000000000000006000002000000000000859
-:10BF60000000400000080000000000010000400147
-:10BF7000000800000000000100004040000800042C
-:10BF800000000002000040600008000400000004FF
-:10BF90000000400000080000000000040000400411
-:10BFA0000008000000000004000040400000000005
-:10BFB00000000008000040480000000000000008E9
-:10BFC0000000800000000000000000100000504051
-:10BFD000000100040000000100005000000000000B
-:10BFE00000000020000050080010000000000004C5
-:10BFF0000000500C0010000000000001000052C7BB
-:10C000000000000000000001000052C60000000017
-:10C0100000000001000030000030001800000004A3
-:10C020000000300400300018000000040000300858
-:10C0300000300018000000020000300A0030001834
-:10C04000000000020000300C003000180000000169
-:10C050000000300D00300018000000010000300E1C
-:10C0600000300018000000010000301000300018FF
-:10C07000000000040000301400300018000000042C
-:10C08000000050000100008000080004000050047F
-:10C0900001000080000800040000000A0000000009
-:10C0A0000000000000005068010000800000000156
-:10C0B0000000506901000080000000010000506C89
-:10C0C00001000080000000020000506E01000080AE
-:10C0D0000000000200005070010000800000000419
-:10C0E0000000507401000080000000040000506651
-:10C0F0000100008000000002000050640100008088
-:10C1000000000001000050600100008000000002FB
-:10C11000000050620100008000000002000050504A
-:10C120000100008000000004000050540100008065
-:10C1300000000004000050580100008000000004CE
-:10C140000000505C01000080000000040000507CF2
-:10C1500001000080000000010000507D010000800F
-:10C160000000000100004018001000000000000462
-:10C170000000409000100000000000040000409803
-:10C18000001000000000000400004110000000004A
-:10C190000000000200004112000000000000000248
-:10C1A00000004114000000000000000200004116E1
-:10C1B00000000000000000020000604000080000D5
-:10C1C00000000002000060420008000000000002C1
-:10C1D00000006044000800000000000400006080CF
-:10C1E0000008000000000008000060C000400008D7
-:10C1F00000000008000060000008000000000002CD
-:10C20000000060020008000000000001000060045F
-:10C210000008000000000002000063400008000069
-:10C220000000000800006380000800000000000417
-:10C23000000063840008000000000001000063C0EB
-:10C240000008000000000002000063C400080000B5
-:10C25000000000020000640000080000000000046C
-:10C2600000007000001000000000000400007004D6
-:10C270000010000000000004000070080010000022
-:10C280000000000400009000000800000000000210
-:10C29000000090020008000000000001000090046F
-:10C2A00000080000000000020000904000080000AC
-:10C2B000000000020000904400080000000000029E
-:10C2C00000009046000800000000000200009648B0
-:10C2D0000008000000000008000090800008000036
-:10C2E000000000020000908400080000000000022E
-:10C2F0000000968800080000000000080000804050
-:10C30000000800000000000100008041000800005B
-:10C310000000000100008042000800000000000151
-:10C3200000008043000800000000000100008000C1
-:10C330000008000000000002000080020008000069
-:10C34000000000010000800400080000000000025E
-:10C35000000080C00008000000000002000080C251
-:10C360000008000000000002000080C40008000077
-:10C3700000000002000080800008000000000001B2
-:10C3800000008081000800000000000100008082A1
-:10C390000008000000000001000080830008000089
-:10C3A000000000010000808400080000000000017F
-:10C3B0000000808500080000000000010000808669
-:10C3C00000080000000000010000600000080000FC
-:10C3D00000000002000060020008000000000001F0
-:10C3E000000060040008000000000002000060423D
-:10C3F00000C00018000000020000604000C00018EB
-:10C40000000000020000604C00C00018000000089E
-:10C410000000604400C000180000000800006057E1
-:10C4200000C00018000000010000605400C00018A7
-:10C43000000000020000605600C00018000000016B
-:10C440000000664000080000000000080000668050
-:10C450000008000000000008000066C0000800009E
-:10C46000000000080000DA4200180000000000028E
-:10C470000000DE4000000000000000000000E000BE
-:10C4800000000000000000040000D0C00000000018
-:10C49000000000040000D0C4000000000000000400
-:10C4A0000000D0C800000000000000040000D0CC54
-:10C4B00000000000000000040000D0D000000000D8
-:10C4C000000000040000D0D40000000000000004C0
-:10C4D0000000D0D800000000000000040000D0C020
-:10C4E00000000000000000200000DB000000000051
-:10C4F000000000040000DB000000000000000068F5
-:10C500000000B94800000000000000000000D0005A
-:10C5100000000000000000040000B0C000000000A7
-:10C52000000000040000B0C400000000000000048F
-:10C530000000B0C800000000000000040000B0C00F
-:10C5400000000000000000100000D6B00000000055
-:10C55000000000040000D6B4000000000000000449
-:10C560000000D6B800000000000000040000D6BCA7
-:10C5700000000000000000040000D6B00000000031
-:10C58000000000100000D348000000000000000878
-:10C590000000D358000000000000008000000010E0
-:10C5A00000000000000000000000D3580000000060
-:10C5B0000000000800000000060205000000000066
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw.ihex b/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw.ihex
new file mode 100644
index 00000000000..8405e719e7f
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e2-6.2.9.0.fw.ihex
@@ -0,0 +1,15473 @@
+:1000000000005310000000680000070C000053803F
+:100010000000318000005A90000000B000008C18F1
+:100020000000C13400008CD0000000D800014E0850
+:100030000000F26400014EE800000074000241502C
+:1000400000005250000241C8000000B40002942099
+:10005000000121EC000294D800000FFC0003B6C898
+:10006000000000040003C6C8020400480000000F9E
+:1000700002040054000000450204005C0000000679
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040258000000360204025C000000365F
+:10017000020402600810000002040264081000007B
+:1001800002040004000000FF02040008000000FF59
+:100190000204000C000000FF02040010000000FF39
+:1001A000020400140000007F02040018000000FF99
+:1001B0000204001C000000FF02040020000000FFF9
+:1001C000020400240000003E020400280000000099
+:1001D0000204002C0000003F020400300000003F39
+:1001E000020400340000003F020400380000003F19
+:1001F0000204003C0000003F020400400000003FF9
+:10020000020400440000003F020404CC000000018E
+:1002100002042008000002110204200C0000020069
+:10022000020420100000020402042014000002193D
+:100230000204201C0000FFFF020420200000FFFF3A
+:10024000020420240000FFFF020420280000FFFF1A
+:1002500002042038000000200604203C0000000FAB
+:1002600002042078000000210604207C0000000F1A
+:10027000020420B800000001060420BC0000000FAA
+:10028000020420F800000001060420FC0000003FEA
+:10029000020421F800000001060421FC0000000F08
+:1002A0000204223807FFFFFF0204223C0000007F07
+:1002B0000204224007FFFFFF020422440000003F27
+:1002C00001042248000000000104224C000000004C
+:1002D000010422500000000001042254000000002C
+:1002E00001042258000000000104225C000000000C
+:1002F00001042260000000000104226400000000EC
+:1003000001042268000000000104226C00000000CB
+:1003100001042270000000000104227400000000AB
+:1003200001042278000000000104227C000000008B
+:10033000020422C00000FFFF020422C40000FFFFED
+:10034000020422C80000FFFF020422CC0000FFFFCD
+:100350000C042000000003E80A0420000000000153
+:100360000B042000000000030605400000000D0003
+:100370000205004400000020020500480000003291
+:1003800002050090021500200205009402150020CD
+:1003900002050098000000300205009C08100000D3
+:1003A000020500A000000036020500A40000003095
+:1003B000020500A800000031020500B000000004A2
+:1003C000020500B400000005020500C000000000A6
+:1003D000020500C400000004020500D40000000172
+:1003E00002050114000000010205011C00000001CB
+:1003F00002050120000000020205020400000001C5
+:100400000205020C0000004002050210000000403E
+:100410000205021C00000020020502200000001C52
+:100420000205022400000020060502400000000A28
+:1004300004050280002000000205005000000007B3
+:1004400002050054000000070205005800000000EB
+:100450000205005C000000080205006000000001C9
+:100460000605006400000003020500D80000000635
+:100470000205000400000001020500080000000160
+:100480000205000C00000001020500100000000140
+:100490000205001400000001020500180000000120
+:1004A0000205001C00000001020500200000000100
+:1004B00002050024000000010205002800000001E0
+:1004C0000205002C000000010205003000000001C0
+:1004D00002050034000000010205003800000001A0
+:1004E0000205003C00000001020500400000000180
+:1004F000020500E00000000D020500E80000000019
+:10050000020500F000000000020500F800000000F5
+:10051000020500E40000002D020500EC00000020B0
+:10052000020500F400000020020500FC000000208D
+:10053000020500E00000001D020500E800000010B8
+:10054000020500F000000010020500F80000001095
+:10055000020500E40000003D020500EC0000003050
+:10056000020500F400000030020500FC000000302D
+:10057000020500E00000004D020500E80000004018
+:10058000020500F000000040020500F800000040F5
+:10059000020500E40000006D020500EC00000060B0
+:1005A000020500F400000060020500FC000000608D
+:1005B000020500E00000005D020500E800000050B8
+:1005C000020500F000000050020500F80000005095
+:1005D000020500E40000007D020500EC0000007050
+:1005E000020500F400000070020500FC000000702D
+:1005F0000406100002000020020600DC00000001DA
+:100600000406020000030220020600DC00000000D5
+:100610000718040000AD0000081807D800050223E1
+:10062000071C000029920000071C8000312A0A657F
+:10063000071D000034A216B0071D80002E7A23D9B2
+:10064000071E000003502F78081E07F03F02022506
+:10065000021800BC0000003001180000000000007B
+:10066000011800040000000001180008000000004C
+:100670000118000C0000000001180010000000002C
+:100680000118001400000000021800200000000102
+:1006900002180024000000020218002800000003D5
+:1006A0000218002C000000000218003000000004B6
+:1006B0000218003400000001021800380000000099
+:1006C0000218003C00000001021800400000000475
+:1006D0000218004400000000021800480000000159
+:1006E0000218004C00000003021800500000000037
+:1006F0000218005400000001021800580000000415
+:100700000218005C000000000218006000000001F8
+:1007100002180064000000030218006800000000D6
+:100720000218006C000000010218007000000004B4
+:100730000218007400000000021800780000000495
+:100740000218007C00000003061800800000000270
+:10075000021800A400007FFF021800A8000003FF99
+:1007600002180224000000000218023400000000F9
+:100770000218024C00000000021802E4000000FF12
+:100780000618100000000400021B8BC000000001CE
+:10079000021B800000000034021B80400000001893
+:1007A000021B80800000000C021B80C000000020A3
+:1007B0000C1B8300000864700A1B830000000157B3
+:1007C0000B1B83000000055F0A1B83400000000034
+:1007D0000C1B8340000002260B1B8340000000011D
+:1007E000021B838000086470021B83C00000022685
+:1007F000021B1480000000010A1B1480000000008E
+:10080000021B944000000001061B944800000002F7
+:10081000061A1000000002B3041A1ACC00010227C5
+:10082000061A1AD000000008061A2008000000C8A6
+:10083000061A200000000002041A1BF8009002288B
+:10084000061A371800000004061A371000000002CC
+:10085000061A500000000002061A500800000004AA
+:10086000061A501800000004061A50280000000460
+:10087000061A503800000004061A50480000000410
+:10088000061A505800000004061A506800000004C0
+:10089000061A507800000002041A52C0000202B882
+:1008A000061A405000000006041A4068000202BA0E
+:1008B000041A4040000402BC041A8000000102C077
+:1008C000061A800400000003041A8010000102C10F
+:1008D000061A801400000003041A8020000102C2DE
+:1008E000061A802400000003041A8030000102C3AD
+:1008F000061A803400000003041A8040000102C47C
+:10090000061A804400000003041A8050000102C54A
+:10091000061A805400000003041A8060000102C619
+:10092000061A806400000003041A8070000102C7E8
+:10093000061A807400000003041A8080000102C8B7
+:10094000061A808400000003041A8090000102C986
+:10095000061A809400000003041A80A0000102CA55
+:10096000061A80A400000003041A80B0000102CB24
+:10097000061A80B400000003041A80C0000102CCF3
+:10098000061A80C400000003041A80D0000102CDC2
+:10099000061A80D400000003041A80E0000102CE91
+:1009A000061A80E400000003041A80F0000102CF60
+:1009B000061A80F400000003041A8100000102D02E
+:1009C000061A810400000003041A8110000102D1FC
+:1009D000061A811400000003041A8120000102D2CB
+:1009E000061A812400000003041A8130000102D39A
+:1009F000061A813400000003041A8140000102D469
+:100A0000061A814400000003041A8150000102D537
+:100A1000061A815400000003041A8160000102D606
+:100A2000061A816400000003041A8170000102D7D5
+:100A3000061A817400000003041A8180000102D8A4
+:100A4000061A818400000003041A8190000102D973
+:100A5000061A819400000003041A81A0000102DA42
+:100A6000061A81A400000003041A81B0000102DB11
+:100A7000061A81B400000003041A81C0000102DCE0
+:100A8000061A81C400000003041A81D0000102DDAF
+:100A9000061A81D400000003041A81E0000102DE7E
+:100AA000061A81E400000003041A81F0000102DF4D
+:100AB000061A81F400000003041A8200000102E01B
+:100AC000061A820400000003041A8210000102E1E9
+:100AD000061A821400000003041A8220000102E2B8
+:100AE000061A822400000003041A8230000102E387
+:100AF000061A823400000003041A8240000102E456
+:100B0000061A824400000003041A8250000102E524
+:100B1000061A825400000003041A8260000102E6F3
+:100B2000061A826400000003041A8270000102E7C2
+:100B3000061A827400000003041A8280000102E891
+:100B4000061A828400000003041A8290000102E960
+:100B5000061A829400000003041A82A0000102EA2F
+:100B6000061A82A400000003041A82B0000102EBFE
+:100B7000061A82B400000003041A82C0000102ECCD
+:100B8000061A82C400000003041A82D0000102ED9C
+:100B9000061A82D400000003041A82E0000102EE6B
+:100BA000061A82E400000003041A82F0000102EF3A
+:100BB000061A82F400000003041A8300000102F008
+:100BC000061A830400000003041A8310000102F1D6
+:100BD000061A831400000003041A8320000102F2A5
+:100BE000061A832400000003041A8330000102F374
+:100BF000061A833400000003041A8340000102F443
+:100C0000061A834400000003041A8350000102F511
+:100C1000061A835400000003041A8360000102F6E0
+:100C2000061A836400000003041A8370000102F7AF
+:100C3000061A837400000003041A8380000102F87E
+:100C4000061A838400000003041A8390000102F94D
+:100C5000061A839400000003041A83A0000102FA1C
+:100C6000061A83A400000003041A83B0000102FBEB
+:100C7000061A83B400000003041A83C0000102FCBA
+:100C8000061A83C400000003041A83D0000102FD89
+:100C9000061A83D400000003041A83E0000102FE58
+:100CA000061A83E400000003041A83F0000102FF27
+:100CB000061A83F400000003041A840000010300F4
+:100CC000061A840400000003041A841000010301C2
+:100CD000061A841400000003041A84200001030291
+:100CE000061A842400000003041A84300001030360
+:100CF000061A843400000003041A8440000103042F
+:100D0000061A844400000003041A845000010305FD
+:100D1000061A845400000003041A846000010306CC
+:100D2000061A846400000003041A8470000103079B
+:100D3000061A847400000003041A8480000103086A
+:100D4000061A848400000003041A84900001030939
+:100D5000061A849400000003041A84A00001030A08
+:100D6000061A84A400000003041A84B00001030BD7
+:100D7000061A84B400000003041A84C00001030CA6
+:100D8000061A84C400000003041A84D00001030D75
+:100D9000061A84D400000003041A84E00001030E44
+:100DA000061A84E400000003041A84F00001030F13
+:100DB000061A84F400000003041A850000010310E1
+:100DC000061A850400000003041A851000010311AF
+:100DD000061A851400000003041A8520000103127E
+:100DE000061A852400000003041A8530000103134D
+:100DF000061A853400000003041A8540000103141C
+:100E0000061A854400000003041A855000010315EA
+:100E1000061A855400000003041A856000010316B9
+:100E2000061A856400000003041A85700001031788
+:100E3000061A857400000003041A85800001031857
+:100E4000061A858400000003041A85900001031926
+:100E5000061A859400000003041A85A00001031AF5
+:100E6000061A85A400000003041A85B00001031BC4
+:100E7000061A85B400000003041A85C00001031C93
+:100E8000061A85C400000003041A85D00001031D62
+:100E9000061A85D400000003041A85E00001031E31
+:100EA000061A85E400000003041A85F00001031F00
+:100EB000061A85F400000003041A860000010320CE
+:100EC000061A860400000003041A8610000103219C
+:100ED000061A861400000003041A8620000103226B
+:100EE000061A862400000003041A8630000103233A
+:100EF000061A863400000003041A86400001032409
+:100F0000061A864400000003041A865000010325D7
+:100F1000061A865400000003041A866000010326A6
+:100F2000061A866400000003041A86700001032775
+:100F3000061A867400000003041A86800001032844
+:100F4000061A868400000003041A86900001032913
+:100F5000061A869400000003041A86A00001032AE2
+:100F6000061A86A400000003041A86B00001032BB1
+:100F7000061A86B400000003041A86C00001032C80
+:100F8000061A86C400000003041A86D00001032D4F
+:100F9000061A86D400000003041A86E00001032E1E
+:100FA000061A86E400000003041A86F00001032FED
+:100FB000061A86F400000003041A870000010330BB
+:100FC000061A870400000003041A87100001033189
+:100FD000061A871400000003041A87200001033258
+:100FE000061A872400000003041A87300001033327
+:100FF000061A873400000003041A874000010334F6
+:10100000061A874400000003041A875000010335C4
+:10101000061A875400000003041A87600001033693
+:10102000061A876400000003041A87700001033762
+:10103000061A877400000003041A87800001033831
+:10104000061A878400000003041A87900001033900
+:10105000061A879400000003041A87A00001033ACF
+:10106000061A87A400000003041A87B00001033B9E
+:10107000061A87B400000003041A87C00001033C6D
+:10108000061A87C400000003041A87D00001033D3C
+:10109000061A87D400000003041A87E00001033E0B
+:1010A000061A87E400000003041A87F00001033FDA
+:1010B000061A87F400000003041A880000010340A8
+:1010C000061A880400000003041A88100001034176
+:1010D000061A881400000003041A88200001034245
+:1010E000061A882400000003041A88300001034314
+:1010F000061A883400000003041A884000010344E3
+:10110000061A884400000003041A885000010345B1
+:10111000061A885400000003041A88600001034680
+:10112000061A886400000003041A8870000103474F
+:10113000061A887400000003041A8880000103481E
+:10114000061A888400000003041A889000010349ED
+:10115000061A889400000003041A88A00001034ABC
+:10116000061A88A400000003041A88B00001034B8B
+:10117000061A88B400000003041A88C00001034C5A
+:10118000061A88C400000003041A88D00001034D29
+:10119000061A88D400000003041A88E00001034EF8
+:1011A000061A88E400000003041A88F00001034FC7
+:1011B000061A88F400000003041A89000001035095
+:1011C000061A890400000003041A89100001035163
+:1011D000061A891400000003041A89200001035232
+:1011E000061A892400000003041A89300001035301
+:1011F000061A893400000003041A894000010354D0
+:10120000061A894400000003041A8950000103559E
+:10121000061A895400000003041A8960000103566D
+:10122000061A896400000003041A8970000103573C
+:10123000061A897400000003041A8980000103580B
+:10124000061A898400000003041A899000010359DA
+:10125000061A899400000003041A89A00001035AA9
+:10126000061A89A400000003041A89B00001035B78
+:10127000061A89B400000003041A89C00001035C47
+:10128000061A89C400000003041A89D00001035D16
+:10129000061A89D400000003041A89E00001035EE5
+:1012A000061A89E400000003041A89F00001035FB4
+:1012B000061A89F400000003041A8A000001036082
+:1012C000061A8A0400000003041A8A100001036150
+:1012D000061A8A1400000003041A8A20000103621F
+:1012E000061A8A2400000003041A8A3000010363EE
+:1012F000061A8A3400000003041A8A4000010364BD
+:10130000061A8A4400000003041A8A50000103658B
+:10131000061A8A5400000003041A8A60000103665A
+:10132000061A8A6400000003041A8A700001036729
+:10133000061A8A7400000003041A8A8000010368F8
+:10134000061A8A8400000003041A8A9000010369C7
+:10135000061A8A9400000003041A8AA00001036A96
+:10136000061A8AA400000003041A8AB00001036B65
+:10137000061A8AB400000003041A8AC00001036C34
+:10138000061A8AC400000003041A8AD00001036D03
+:10139000061A8AD400000003041A8AE00001036ED2
+:1013A000061A8AE400000003041A8AF00001036FA1
+:1013B000061A8AF400000003041A8B00000103706F
+:1013C000061A8B0400000003041A8B10000103713D
+:1013D000061A8B1400000003041A8B20000103720C
+:1013E000061A8B2400000003041A8B3000010373DB
+:1013F000061A8B3400000003041A8B4000010374AA
+:10140000061A8B4400000003041A8B500001037578
+:10141000061A8B5400000003041A8B600001037647
+:10142000061A8B6400000003041A8B700001037716
+:10143000061A8B7400000003041A8B8000010378E5
+:10144000061A8B8400000003041A8B9000010379B4
+:10145000061A8B9400000003041A8BA00001037A83
+:10146000061A8BA400000003041A8BB00001037B52
+:10147000061A8BB400000003041A8BC00001037C21
+:10148000061A8BC400000003041A8BD00001037DF0
+:10149000061A8BD400000003041A8BE00001037EBF
+:1014A000061A8BE400000003041A8BF00001037F8E
+:1014B000061A8BF400000003041A8C00000103805C
+:1014C000061A8C0400000003041A8C10000103812A
+:1014D000061A8C1400000003041A8C2000010382F9
+:1014E000061A8C2400000003041A8C3000010383C8
+:1014F000061A8C3400000003041A8C400001038497
+:10150000061A8C4400000003041A8C500001038565
+:10151000061A8C5400000003041A8C600001038634
+:10152000061A8C6400000003041A8C700001038703
+:10153000061A8C7400000003041A8C8000010388D2
+:10154000061A8C8400000003041A8C9000010389A1
+:10155000061A8C9400000003041A8CA00001038A70
+:10156000061A8CA400000003041A8CB00001038B3F
+:10157000061A8CB400000003041A8CC00001038C0E
+:10158000061A8CC400000003041A8CD00001038DDD
+:10159000061A8CD400000003041A8CE00001038EAC
+:1015A000061A8CE400000003041A8CF00001038F7B
+:1015B000061A8CF400000003041A8D000001039049
+:1015C000061A8D0400000003041A8D100001039117
+:1015D000061A8D1400000003041A8D2000010392E6
+:1015E000061A8D2400000003041A8D3000010393B5
+:1015F000061A8D3400000003041A8D400001039484
+:10160000061A8D4400000003041A8D500001039552
+:10161000061A8D5400000003041A8D600001039621
+:10162000061A8D6400000003041A8D7000010397F0
+:10163000061A8D7400000003041A8D8000010398BF
+:10164000061A8D8400000003041A8D90000103998E
+:10165000061A8D9400000003041A8DA00001039A5D
+:10166000061A8DA400000003041A8DB00001039B2C
+:10167000061A8DB400000003041A8DC00001039CFB
+:10168000061A8DC400000003041A8DD00001039DCA
+:10169000061A8DD400000003041A8DE00001039E99
+:1016A000061A8DE400000003041A8DF00001039F68
+:1016B000061A8DF400000003041A8E00000103A036
+:1016C000061A8E0400000003041A8E10000103A104
+:1016D000061A8E1400000003041A8E20000103A2D3
+:1016E000061A8E2400000003041A8E30000103A3A2
+:1016F000061A8E3400000003041A8E40000103A471
+:10170000061A8E4400000003041A8E50000103A53F
+:10171000061A8E5400000003041A8E60000103A60E
+:10172000061A8E6400000003041A8E70000103A7DD
+:10173000061A8E7400000003041A8E80000103A8AC
+:10174000061A8E8400000003041A8E90000103A97B
+:10175000061A8E9400000003041A8EA0000103AA4A
+:10176000061A8EA400000003041A8EB0000103AB19
+:10177000061A8EB400000003041A8EC0000103ACE8
+:10178000061A8EC400000003041A8ED0000103ADB7
+:10179000061A8ED400000003041A8EE0000103AE86
+:1017A000061A8EE400000003041A8EF0000103AF55
+:1017B000061A8EF400000003041A8F00000103B023
+:1017C000061A8F0400000003041A8F10000103B1F1
+:1017D000061A8F1400000003041A8F20000103B2C0
+:1017E000061A8F2400000003041A8F30000103B38F
+:1017F000061A8F3400000003041A8F40000103B45E
+:10180000061A8F4400000003041A8F50000103B52C
+:10181000061A8F5400000003041A8F60000103B6FB
+:10182000061A8F6400000003041A8F70000103B7CA
+:10183000061A8F7400000003041A8F80000103B899
+:10184000061A8F8400000003041A8F90000103B968
+:10185000061A8F9400000003041A8FA0000103BA37
+:10186000061A8FA400000003041A8FB0000103BB06
+:10187000061A8FB400000003041A8FC0000103BCD5
+:10188000061A8FC400000003041A8FD0000103BDA4
+:10189000061A8FD400000003041A8FE0000103BE73
+:1018A000061A8FE400000007041A62C0002003BF7C
+:1018B000061A1AF000000042061AAF0000000008E5
+:1018C000061AE00000000540061AD0000000007271
+:1018D000061AD24800000010061AD6B000000020F8
+:1018E000061AD47000000090061AD46800000002A6
+:1018F000061AA000000001C4061A30000000001003
+:10190000061A308000000010061A31000000001096
+:10191000061A318000000010061A33000000001281
+:10192000061A339000000070061AD4580000000216
+:10193000061AD34800000002061AD35800000020FF
+:10194000061AA710000001C4061A3040000000105B
+:10195000061A30C000000010061A314000000010C6
+:10196000061A31C000000010061A334800000012A9
+:10197000061A355000000070061AD46000000002FC
+:10198000061AD35000000002061AD3D80000002027
+:10199000021AAE2000000000061A500000000002EB
+:1019A000061A508000000012041A4000000203DFF3
+:1019B000041A63C0000203E1061A7000000000046C
+:1019C000061A320000000008021AAE2400000000CF
+:1019D000061A501000000002061A50C8000000123B
+:1019E000041A4008000203E3041A63C8000203E576
+:1019F000061A701000000004061A322000000008C9
+:101A0000021AAE2800000000061A50200000000252
+:101A1000061A511000000012041A4010000203E7D9
+:101A2000041A63D0000203E9061A702000000004C3
+:101A3000061A324000000008021AAE2C0000000016
+:101A4000061A503000000002061A51580000001219
+:101A5000041A4018000203EB041A63D8000203EDD5
+:101A6000061A703000000004061A326000000008F8
+:101A7000021AAE3000000000061A504000000002BA
+:101A8000061A51A000000012041A4020000203EFC1
+:101A9000041A63E0000203F1061A7040000000041B
+:101AA000061A328000000008021AAE34000000005E
+:101AB000061A505000000002061A51E800000012F9
+:101AC000041A4028000203F3041A63E8000203F535
+:101AD000061A705000000004061A32A00000000828
+:101AE000021AAE3800000000061A50600000000222
+:101AF000061A523000000012041A4030000203F7A8
+:101B0000041A63F0000203F9061A70600000000472
+:101B1000061A32C000000008021AAE3C00000000A5
+:101B2000061A507000000002061A527800000012D7
+:101B3000041A4038000203FB041A63F8000203FD94
+:101B4000061A707000000004061A32E00000000857
+:101B50000200A2A4000002090200A270000000001E
+:101B60000200A274000000000200A2700000000049
+:101B70000200A274000000000200A2700000000039
+:101B80000200A274000000000200A2700000000029
+:101B90000200A27400000000020100B40000000175
+:101BA000020100B800000001020100CC00000001A9
+:101BB000020100D000000001020100DC0000000171
+:101BC0000201010000000001020101040000000107
+:101BD0000201007C003000000201008400000028A7
+:101BE0000201008C0000000002010130000000042E
+:101BF0000201025C00000001020103280000000055
+:101C0000020160580000FFFF020160700000000741
+:101C10000201055400000030020100C40000000170
+:101C2000020100F800000001020100F000000001C4
+:101C3000020100800030000002010088000000283E
+:101C400002010090000000000201013400000004C5
+:101C5000020102DC000000010201032C0000000070
+:101C60000201605C0000FFFF0201607400000007D9
+:101C70000201056400000030020100C800000001FC
+:101C8000020100FC00000001020100F4000000015C
+:101C9000020C100000000028020C200800000211B5
+:101CA000020C200C00000200020C201000000204B4
+:101CB000020C201C0000FFFF020C20200000FFFF90
+:101CC000020C20240000FFFF020C20280000FFFF70
+:101CD000020C203800000000020C203C00000037FD
+:101CE000020C204000000021020C204400000020D3
+:101CF000060C20480000001D020C20BC0000000162
+:101D0000060C20C00000003F020C21BC00000001B6
+:101D1000020C21C000000001020C21C400000001DF
+:101D2000060C21C80000001C020C223807FFFFFF30
+:101D3000020C223C0000007F020C224007FFFFFF44
+:101D4000020C22440000003F010C22480000000069
+:101D5000010C224C00000000010C22500000000089
+:101D6000010C225400000000010C22580000000069
+:101D7000010C225C00000000010C22600000000049
+:101D8000010C226400000000010C22680000000029
+:101D9000010C226C00000000010C22700000000009
+:101DA000010C227400000000010C227800000000E9
+:101DB000010C227C00000000020C22D80000FFFF72
+:101DC000020C22DC0000FFFF020C22E00000FFFFFB
+:101DD000020C22E40000FFFF0C0C2000000003E8CE
+:101DE0000A0C2000000000010B0C20000000000382
+:101DF000020C400800001011020C400C0000100002
+:101E0000020C401000001004020C401400001021CD
+:101E1000020C401C0000FFFF020C40200000FFFFEE
+:101E2000020C40240000FFFF020C40280000FFFFCE
+:101E3000020C403800000046020C403C0000000C40
+:101E4000060C404000000002020C40480000001850
+:101E5000020C404C000000F0060C40500000001F37
+:101E6000020C40CC00000001060C40D00000003AFB
+:101E7000020C41B800000001060C41BC0000000348
+:101E8000020C41C800000001020C41CC000000011E
+:101E9000060C41D00000001A020C423807FFFFFF79
+:101EA000020C423C0000007F020C424007FFFFFF93
+:101EB000020C42440000003F010C424800000000B8
+:101EC000010C424C00000000010C425000000000D8
+:101ED000010C425400000000010C425800000000B8
+:101EE000010C425C00000000010C42600000000098
+:101EF000010C426400000000010C42680000000078
+:101F0000010C426C00000000010C42700000000057
+:101F1000010C427400000000010C42780000000037
+:101F2000010C427C00000000010C42800000000017
+:101F3000020C42D80000FFFF020C42DC0000FFFF51
+:101F4000020C42E00000FFFF020C42E40000FFFF31
+:101F50000C0C4000000003E80A0C400000000001E7
+:101F60000B0C400000000003060D400000000A00BA
+:101F7000020D004400000032020D008C021500200A
+:101F8000020D009002150020020D009408100000C0
+:101F9000020D009800000036020D00A000000000B5
+:101FA000020D00A400000004020D00A800000004BF
+:101FB000060D00AC00000002020D00B80000000297
+:101FC000020D00C000000001020D00C80000000268
+:101FD000020D00CC00000002020D015C00000001B7
+:101FE000020D016400000001020D01680000000202
+:101FF000020D020400000001020D020C000000208E
+:10200000020D021000000040020D0214000000400A
+:10201000020D022000000003020D0224000000183F
+:10202000060D028000000012040D0300001803FFDB
+:10203000060D03600000000C020D004C00000001C2
+:10204000020D005000000002020D005400000000CC
+:10205000020D005800000008060D005C000000049E
+:10206000020D00C400000004020D00040000000185
+:10207000020D000800000001020D000C000000012C
+:10208000020D001000000001020D0014000000010C
+:10209000020D001800000001020D001C00000001EC
+:1020A000020D002000000001020D002400000001CC
+:1020B000020D002800000001020D002C00000001AC
+:1020C000020D003000000001020D0034000000018C
+:1020D000020D003800000001020D003C000000016C
+:1020E000020D011400000009020D011C0000000A8D
+:1020F000020D012400000000020D012C0000000070
+:10210000020D013400000000020D013C0000000B34
+:10211000020D014400000000020D0118000000291A
+:10212000020D01200000002A020D012800000020FD
+:10213000020D013000000020020D013800000020D7
+:10214000020D01400000002B020D0148000000209C
+:10215000020D011400000019020D011C0000001AFC
+:10216000020D012400000010020D012C00000010DF
+:10217000020D013400000010020D013C0000001BA4
+:10218000020D014400000010020D0118000000398A
+:10219000020D01200000003A020D0128000000306D
+:1021A000020D013000000030020D01380000003047
+:1021B000020D01400000003B020D0148000000300C
+:1021C000020D011400000049020D011C0000004A2C
+:1021D000020D012400000040020D012C000000400F
+:1021E000020D013400000040020D013C0000004BD4
+:1021F000020D014400000040020D011800000069BA
+:10220000020D01200000006A020D0128000000609C
+:10221000020D013000000060020D01380000006076
+:10222000020D01400000006B020D0148000000603B
+:10223000020D011400000059020D011C0000005A9B
+:10224000020D012400000050020D012C000000507E
+:10225000020D013400000050020D013C0000005B43
+:10226000020D014400000050020D01180000007929
+:10227000020D01200000007A020D0128000000700C
+:10228000020D013000000070020D013800000070E6
+:10229000020D01400000007B020D014800000070AB
+:1022A000060E200000000800020E004C0000003264
+:1022B000020E009402150020020E00980215002064
+:1022C000020E009C00000030020E00A0081000006A
+:1022D000020E00A400000036020E00A8000000302C
+:1022E000020E00AC00000031020E00B4000000033A
+:1022F000020E00B800000000020E00C40000000042
+:10230000020E00CC00000006020E00D80000000102
+:10231000020E014400000001020E014C0000000109
+:10232000020E015000000002020E02040000000133
+:10233000020E020C00000040020E021000000040DD
+:10234000020E021C00000004020E02200000002009
+:10235000020E02240000000E020E02280000001BE4
+:10236000060E030000000012040E0280001B04177A
+:10237000060E02EC00000005020E00540000000CE6
+:10238000020E00580000000C020E005C000000006D
+:10239000020E006000000010020E00640000001039
+:1023A000060E006800000003020E00DC00000003BF
+:1023B000020E000400000001020E000800000001EF
+:1023C000020E000C00000001020E001000000001CF
+:1023D000020E001400000001020E001800000001AF
+:1023E000020E001C00000001020E0020000000018F
+:1023F000020E002400000001020E0028000000016F
+:10240000020E002C00000001020E0030000000014E
+:10241000020E003400000001020E0038000000012E
+:10242000020E003C00000001020E0040000000010E
+:10243000020E004400000001020E01100000000F17
+:10244000020E011800000000020E01200000000032
+:10245000020E012800000000020E01140000002FEF
+:10246000020E011C00000020020E012400000020CA
+:10247000020E012C00000020020E01100000001FBF
+:10248000020E011800000010020E012000000010D2
+:10249000020E012800000010020E01140000003F8F
+:1024A000020E011C00000030020E0124000000306A
+:1024B000020E012C00000030020E01100000004F3F
+:1024C000020E011800000040020E01200000004032
+:1024D000020E012800000040020E01140000006FEF
+:1024E000020E011C00000060020E012400000060CA
+:1024F000020E012C00000060020E01100000005FBF
+:10250000020E011800000050020E012000000050D1
+:10251000020E012800000050020E01140000007F8E
+:10252000020E011C00000070020E01240000007069
+:10253000020E012C000000700730040000D60000DD
+:10254000083007D80005043207340000322B0000A1
+:1025500007348000314B0C8B0735000038C518DE7E
+:10256000073580002F90271007360000268F32F5A0
+:102570000836716031D40434023000BC00000030F1
+:1025800001300000000000000130000400000000E5
+:1025900001300008000000000130000C00000000C5
+:1025A00001300010000000000130001400000000A5
+:1025B0000230002000000001023000240000000270
+:1025C00002300028000000030230002C0000000050
+:1025D000023000300000000402300034000000012E
+:1025E00002300038000000000230003C0000000112
+:1025F00002300040000000040230004400000000EF
+:1026000002300048000000010230004C00000003CE
+:1026100002300050000000000230005400000001B1
+:1026200002300058000000040230005C000000008E
+:10263000023000600000000102300064000000036E
+:1026400002300068000000000230006C0000000151
+:10265000023000700000000402300074000000002E
+:1026600002300078000000040230007C000000030B
+:102670000630008000000002023000A400007FFF4E
+:10268000023000A8000003FF023002240000000016
+:1026900002300234000000000230024C0000000052
+:1026A000023002E40000FFFF0630200000000800B6
+:1026B00002338BC000000001023380000000001ACA
+:1026C000023380400000004E023380800000001082
+:1026D000023380C0000000200C33830000086470C7
+:1026E0000A338300000001570B3383000000055FAD
+:1026F0000A338340000000000C33834000000226B0
+:102700000B338340000000010233838000086470B3
+:10271000023383C00000022602331480000000014F
+:102720000A3314800000000006328000000001021D
+:1027300006322008000000C8063220000000000217
+:1027400004328520008F04360632875C00000009C1
+:1027500006323EB00000000606323ED00000000205
+:1027600006323E800000000A04323EA8000204C582
+:1027700006323E00000000200632500000000940F2
+:102780000632400000000004043294C0000204C776
+:1027900006324110000000020632D0000000007036
+:1027A0000632DB00000000D40632DEA0000000028A
+:1027B0000632E00000000800063324000000011883
+:1027C0000632100000000188063250000000002090
+:1027D00006325100000000200632520000000020A6
+:1027E0000632530000000020063254000000002092
+:1027F000063255000000002006325600000000207E
+:102800000632570000000020063258000000002069
+:10281000063259000000002006325A000000002055
+:1028200006325B000000002006325C000000002041
+:1028300006325D000000002006325E00000000202D
+:1028400006325F0000000020063284F00000000223
+:1028500004328500000204C9063285080000000227
+:102860000632DE90000000020633286000000118E6
+:102870000632162000000188063250800000002039
+:1028800006325180000000200632528000000020F5
+:1028900006325380000000200632548000000020E1
+:1028A00006325580000000200632568000000020CD
+:1028B00006325780000000200632588000000020B9
+:1028C000063259800000002006325A8000000020A5
+:1028D00006325B800000002006325C800000002091
+:1028E00006325D800000002006325E80000000207D
+:1028F00006325F8000000020063284F800000002EB
+:1029000004328510000204CB063285180000000254
+:102910000632DE98000000020232845000000000FF
+:102920000632401000000002023284540000000011
+:1029300006324020000000020232845800000000ED
+:1029400006324030000000020232845C00000000C9
+:1029500006324040000000020232846000000000A5
+:102960000632405000000002023284640000000081
+:10297000063240600000000202328468000000005D
+:1029800006324070000000020232846C0000000039
+:10299000063240800000000207200400007300009F
+:1029A00008200780001004CD072400002AE400005E
+:1029B0000724800027670ABA0824D35063FC04CF99
+:1029C000022000BC000000300120000000000000D8
+:1029D00001200004000000000120000800000000A9
+:1029E0000120000C00000000012000100000000089
+:1029F000012000140000000002200020000000015F
+:102A00000220002400000002022000280000000331
+:102A10000220002C00000000022000300000000412
+:102A200002200034000000010220003800000000F5
+:102A30000220003C000000010220004000000004D1
+:102A400002200044000000000220004800000001B5
+:102A50000220004C00000003022000500000000093
+:102A60000220005400000001022000580000000471
+:102A70000220005C00000000022000600000000155
+:102A80000220006400000003022000680000000033
+:102A90000220006C00000001022000700000000411
+:102AA00002200074000000000220007800000004F2
+:102AB0000220007C000000030620008000000002CD
+:102AC000022000A400007FFF022000A8000003FFF6
+:102AD0000220022400000000022002340000000056
+:102AE0000220024C00000000022002E40000FFFF70
+:102AF000062020000000080002238BC00000000117
+:102B00000223800000000010022380400000001219
+:102B10000223808000000030022380C00000000EED
+:102B20000C238300000864700A238300000001570F
+:102B30000B2383000000055F0A2383400000000090
+:102B40000C238340000002260B2383400000000179
+:102B50000223838000086470022383C000000226E1
+:102B600002231480000000010A23148000000000EA
+:102B7000062210000000004206222008000000C8C3
+:102B800006222000000000020622B00000000330F0
+:102B90000622F400000000530422F54C000104D189
+:102BA0000622F550000000030422F55C000104D267
+:102BB0000622F560000000030422F56C000104D336
+:102BC0000622F570000000030422F57C000104D405
+:102BD0000622F580000000030422F58C000104D5D4
+:102BE0000622F590000000030422F59C000104D6A3
+:102BF0000622F5A0000000030422F5AC000104D772
+:102C00000622F5B0000000030422F5BC000104D840
+:102C10000622F5C0000000460622E2000000044043
+:102C200004221240009004D906223000000000C0A7
+:102C30000622670000000100062290000000040048
+:102C400004226B0800200569062211F0000000062E
+:102C50000422120800060589062212200000000244
+:102C600006224000000005C00622C0000000000649
+:102C70000422C0180006058F0622C0300000000A9A
+:102C80000422C058000605950622C0700000000A04
+:102C90000422C0980006059B0622C0B00000000A6E
+:102CA0000422C0D8000605A10622C0F00000000AD8
+:102CB0000422C118000605A70622C1300000000A40
+:102CC0000422C158000605AD0622C1700000000AAA
+:102CD0000422C198000605B30622C1B00000000A14
+:102CE0000422C1D8000605B90622C1F00000000A7E
+:102CF0000422C218000605BF0622C2300000000AE6
+:102D00000422C258000605C50622C2700000000A4F
+:102D10000422C298000605CB0622C2B00000000AB9
+:102D20000422C2D8000605D10622C2F00000000A23
+:102D30000422C318000605D70622C3300000000A8B
+:102D40000422C358000605DD0622C3700000000AF5
+:102D50000422C398000605E30622C3B00000000A5F
+:102D60000422C3D8000605E90622C3F00000000AC9
+:102D70000422C418000605EF0622C4300000000A31
+:102D80000422C458000605F50622C4700000000A9B
+:102D90000422C498000605FB0622C4B00000000A05
+:102DA0000422C4D8000606010622C4F00000000A6E
+:102DB0000422C518000606070622C5300000000AD6
+:102DC0000422C5580006060D0622C5700000000A40
+:102DD0000422C598000606130622C5B00000000AAA
+:102DE0000422C5D8000606190622C5F00000000A14
+:102DF0000422C6180006061F0622C6300000000A7C
+:102E00000422C658000606250622C6700000000AE5
+:102E10000422C6980006062B0622C6B00000000A4F
+:102E20000422C6D8000606310622C6F00000000AB9
+:102E30000422C718000606370622C7300000000A21
+:102E40000422C7580006063D0622C7700000000A8B
+:102E50000422C798000606430622C7B00000000AF5
+:102E60000422C7D8000606490622C7F00000000A5F
+:102E70000422C8180006064F0622C8300000000AC7
+:102E80000422C858000606550622C8700000000A31
+:102E90000422C8980006065B0622C8B00000000A9B
+:102EA0000422C8D8000606610622C8F00000000A05
+:102EB0000422C918000606670622C9300000000A6D
+:102EC0000422C9580006066D0622C9700000000AD7
+:102ED0000422C998000606730622C9B00000000A41
+:102EE0000422C9D8000606790622C9F00000000AAB
+:102EF0000422CA180006067F0622CA300000000A13
+:102F00000422CA58000606850622CA700000000A7C
+:102F10000422CA980006068B0622CAB00000000AE6
+:102F20000422CAD8000606910622CAF00000000A50
+:102F30000422CB18000606970622CB300000000AB8
+:102F40000422CB580006069D0622CB700000000A22
+:102F50000422CB98000606A30622CBB00000000A8C
+:102F60000422CBD8000606A90622CBF00000000AF6
+:102F70000422CC18000606AF0622CC300000000A5E
+:102F80000422CC58000606B50622CC700000000AC8
+:102F90000422CC98000606BB0622CCB00000000A32
+:102FA0000422CCD8000606C10622CCF00000000A9C
+:102FB0000422CD18000606C70622CD300000000A04
+:102FC0000422CD58000606CD0622CD700000000A6E
+:102FD0000422CD98000606D30622CDB00000000AD8
+:102FE0000422CDD8000606D90622CDF00000000A42
+:102FF0000422CE18000606DF0622CE300000000AAA
+:103000000422CE58000606E50622CE700000000A13
+:103010000422CE98000606EB0622CEB00000000A7D
+:103020000422CED8000606F10622CEF00000000AE7
+:103030000422CF18000606F70622CF300000000A4F
+:103040000422CF58000606FD0622CF700000000AB9
+:103050000422CF98000607030622CFB00000000A22
+:103060000422CFD8000607090622CFF00000000A8C
+:103070000422D0180006070F0622D0300000000AF4
+:103080000422D058000607150622D0700000000A5E
+:103090000422D0980006071B0622D0B00000000AC8
+:1030A0000422D0D8000607210622D0F00000000A32
+:1030B0000422D118000607270622D1300000000A9A
+:1030C0000422D1580006072D0622D1700000000A04
+:1030D0000422D198000607330622D1B00000000A6E
+:1030E0000422D1D8000607390622D1F00000000AD8
+:1030F0000422D2180006073F0622D2300000000A40
+:103100000422D258000607450622D2700000000AA9
+:103110000422D2980006074B0622D2B00000000A13
+:103120000422D2D8000607510622D2F00000000A7D
+:103130000422D318000607570622D3300000000AE5
+:103140000422D3580006075D0622D3700000000A4F
+:103150000422D398000607630622D3B00000000AB9
+:103160000422D3D8000607690622D3F00000000A23
+:103170000422D4180006076F0622D4300000000A8B
+:103180000422D458000607750622D4700000000AF5
+:103190000422D4980006077B0622D4B00000000A5F
+:1031A0000422D4D8000607810622D4F00000000AC9
+:1031B0000422D518000607870622D5300000000A31
+:1031C0000422D5580006078D0622D5700000000A9B
+:1031D0000422D598000607930622D5B00000000A05
+:1031E0000422D5D8000607990622D5F00000000A6F
+:1031F0000422D6180006079F0622D6300000000AD7
+:103200000422D658000607A50622D6700000000A40
+:103210000422D698000607AB0622D6B00000000AAA
+:103220000422D6D8000607B10622D6F00000000A14
+:103230000422D718000607B70622D7300000000A7C
+:103240000422D758000607BD0622D7700000000AE6
+:103250000422D798000607C30622D7B00000000A50
+:103260000422D7D8000607C90622D7F00000000ABA
+:103270000422D818000607CF0622D8300000000A22
+:103280000422D858000607D50622D8700000000A8C
+:103290000422D898000607DB0622D8B00000000AF6
+:1032A0000422D8D8000607E10622D8F00000000A60
+:1032B0000422D918000607E70622D9300000000AC8
+:1032C0000422D958000607ED0622D9700000000A32
+:1032D0000422D998000607F30622D9B00000000A9C
+:1032E0000422D9D8000607F90622D9F00000000A06
+:1032F0000422DA18000607FF0622DA300000000A6E
+:103300000422DA58000608050622DA700000000AD6
+:103310000422DA980006080B0622DAB00000000A40
+:103320000422DAD8000608110622DAF00000000AAA
+:103330000422DB18000608170622DB300000000A12
+:103340000422DB580006081D0622DB700000000A7C
+:103350000422DB98000608230622DBB00000000AE6
+:103360000422DBD8000608290622DBF00000000A50
+:103370000422DC180006082F0622DC300000000AB8
+:103380000422DC58000608350622DC700000000A22
+:103390000422DC980006083B0622DCB00000000A8C
+:1033A0000422DCD8000608410622DCF00000000AF6
+:1033B0000422DD18000608470622DD300000000A5E
+:1033C0000422DD580006084D0622DD700000000AC8
+:1033D0000422DD98000608530622DDB00000000A32
+:1033E0000422DDD8000608590622DDF00000000A9C
+:1033F0000422DE180006085F0622DE300000000A04
+:103400000422DE58000608650622DE700000000A6D
+:103410000422DE980006086B0622DEB00000000AD7
+:103420000422DED8000608710622DEF00000000A41
+:103430000422DF18000608770622DF300000000AA9
+:103440000422DF580006087D0622DF700000000A13
+:103450000422DF98000608830622DFB00000000A7D
+:103460000422DFD8000608890622DFF00000000AE7
+:103470000422E0180006088F0622E0300000000A4F
+:103480000422E058000608950622E0700000000AB9
+:103490000422E0980006089B0622E0B00000000A23
+:1034A0000422E0D8000608A10622E0F00000000A8D
+:1034B0000422E118000608A70622E1300000000AF5
+:1034C0000422E158000608AD0622E1700000000A5F
+:1034D0000422E198000608B30622E1B00000000AC9
+:1034E0000422E1D8000608B90622E1F00000000439
+:1034F0000622153800000002062211E80000000232
+:103500000622F3000000000802221148000000001B
+:1035100006225900000000060622330000000002C7
+:1035200006226040000000300622F3200000000860
+:103530000222114C0000000006225918000000066B
+:10354000062233080000000206226100000000305D
+:103550000622F34000000008022211500000000083
+:103560000622593000000006062233100000000237
+:10357000062261C0000000300622F360000000084F
+:1035800002221154000000000622594800000006E3
+:10359000062233180000000206226280000000307C
+:1035A0000622F380000000080222115800000000EB
+:1035B00006225960000000060622332000000002A7
+:1035C00006226340000000300622F3A0000000083D
+:1035D0000222115C0000000006225978000000065B
+:1035E000062233280000000206226400000000309A
+:1035F0000622F3C000000008022211600000000053
+:103600000622599000000006062233300000000216
+:10361000062264C0000000300622F3E0000000082B
+:103620000222116400000000062259A800000006D2
+:1036300006223338000000020622658000000030B8
+:103640000216100000000028021700080000000207
+:103650000217002C000000030217003C00000004C9
+:10366000021700440000000002170048000000029A
+:103670000217004C0000009002170050000000905C
+:103680000217005400800090021700580810000034
+:10369000021700700000000602170078000009FF02
+:1036A0000217007C0000076C021701C4081000001C
+:1036B0000217034400000001021704000000008A02
+:1036C00002170404000000800217040800000081B3
+:1036D0000217040C00000080021704100000008A8A
+:1036E0000217041400000080021704180000008173
+:1036F0000217041C00000080021704300000008A3A
+:103700000217043400000080021704380000008112
+:103710000217043C00000080021704400000008AE9
+:1037200002170444000000800217044800000081D2
+:103730000217044C00000080021704800000008A79
+:103740000217048400000080021704880000008132
+:103750000217048C0000008002170038007C10045F
+:10376000021700040000000F021701EC0000000225
+:10377000021701F400000002021701EC0000000231
+:10378000021701F400000002021701EC0000000221
+:10379000021701F400000002021701EC0000000211
+:1037A000021701F400000002021701EC0000000201
+:1037B000021701F400000002021701EC00000002F1
+:1037C000021701F400000002021701EC00000002E1
+:1037D000021701F400000002021701EC00000002D1
+:1037E000021701F400000002061640240000000247
+:1037F000021640700000001C021642080000000182
+:1038000002164210000000010216422000000001D2
+:10381000021642280000000102164230000000019A
+:103820000216423800000001021642600000000249
+:103830000C16401C0003D0900A16401C0000009C8F
+:103840000B16401C000002710216403000000028D8
+:10385000021640340000002C0216403800000030F0
+:103860000216404400000020021640000000000143
+:10387000021640D8000000010216400800000001B6
+:103880000216400C0000000102164010000000016A
+:1038900002164240000000000216424800000000EC
+:1038A000061642700000000202164250000000009E
+:1038B0000216425800000000061642800000000276
+:1038C00002166008000012140216600C00001200BC
+:1038D00002166010000012040216601C0000FFFFB8
+:1038E000021660200000FFFF021660240000FFFFA8
+:1038F000021660280000FFFF02166038000000205A
+:103900000216603C00000010061660400000000235
+:1039100002166048000000230216604C00000024DC
+:1039200002166050000000250216605400000026B8
+:1039300002166058000000270216605C00000011AB
+:103940000216606000000000021660640000002B98
+:10395000021660680000002C0216606C0000002D4A
+:1039600002166070000000EC021660740000000097
+:1039700002166078000000290216607C0000002A10
+:10398000021660800000002F061660840000000D03
+:10399000021660B800000001061660BC00000008B6
+:1039A000021660DC00000001061660E00000000462
+:1039B000021660F000000001061660F4000000032B
+:1039C0000216610000000001061661040000002DCF
+:1039D000021661B800000001061661BC0000000874
+:1039E000021661DC00000001061661E00000000420
+:1039F000021661F000000001061661F400000003E9
+:103A00000216620000000001061662040000000DAC
+:103A10000216623807FFFFFF0216623C0000007FBB
+:103A20000216624007FFFFFF021662440000003FDB
+:103A300001166248000000000116624C0000000000
+:103A400001166250000000000116625400000000E0
+:103A500001166258000000000116625C00000000C0
+:103A600001166260000000000116626400000000A0
+:103A700001166268000000000116626C0000000080
+:103A80000116627000000000011662740000000060
+:103A900001166278000000000116627C0000000040
+:103AA000011662D400000000021662D80000FFFF79
+:103AB000021662DC0000FFFF021662E00000FFFF5A
+:103AC000021662E40000FFFF0C166000000003E82D
+:103AD0000A166000000000010B16600000000003E1
+:103AE0000216804000000006021680440000000517
+:103AF000021680480000000A0216804C00000005F3
+:103B00000216805400000002021680CC000000045F
+:103B1000021680D000000004021680D400000004C9
+:103B2000021680D800000004021680DC00000004A9
+:103B3000021680E000000004021680E40000000489
+:103B4000021680E800000004021688040000000647
+:103B5000021680300000007C021680340000003D18
+:103B6000021680380000003F0216803C0000009CD6
+:103B70000216E6E8000060000216E6EC00006000B5
+:103B80000216E6F0000060000216E6F40000600095
+:103B900002168234000025E40216823800008000FC
+:103BA00002168094000025E3021681F400000C0840
+:103BB000021681F800000040021681FC000001009E
+:103BC0000216820000000020021682040000001786
+:103BD00002168208000000800216820C000002001B
+:103BE00002168210000000000216823C0000001342
+:103BF00002168220008F008F0216821C008F008F19
+:103C0000021680F0000000070216821801FF01FF73
+:103C10000216821401FF01FF061680F40000000264
+:103C20000216811C0000000502168120000000051C
+:103C300002168124000000050216812800000008F9
+:103C40000216812C000000060216813000000007D9
+:103C50000616813400000004021680FC00000000FB
+:103C600006168144000000020216814C0000000488
+:103C7000021681500000000102168154000000026B
+:103C800002168158000000050216815C0000000544
+:103C90000216816000000005021681640000000524
+:103CA0000216816800000008021681000000000072
+:103CB0000216816C000000060216817000000007E9
+:103CC00006168174000000060216818C00000004B4
+:103CD000021681900000000102168104000000001D
+:103CE000021681940000000202168198000000056F
+:103CF0000216819C00000005021681A0000000054C
+:103D0000021681A400000005021681A80000000828
+:103D1000021681AC00000006021681B00000000708
+:103D2000061681B40000000202168108000000009F
+:103D3000061681BC00000004021681CC00000004BD
+:103D4000021681D000000001021681D4000000029A
+:103D5000021681D800000005021681DC0000000573
+:103D6000021681E0000000050216810C000000042C
+:103D7000021681E400000005021681E80000000838
+:103D8000021681EC00000006021681F00000000718
+:103D900002168110000000010216811400000002CA
+:103DA00002168118000000050216809C0000004CDD
+:103DB000021680A00000004C061680C4000000021D
+:103DC000021680A400000000021680A80000000077
+:103DD000021680AC0000004C061680B00000000502
+:103DE0000216E6F80000020402168240003F003F7F
+:103DF00002168244003F003F061682900000000435
+:103E000002168248008000800216824C00800080EA
+:103E100002168250010001000216825401000100C6
+:103E20000616825800000002021682600040004020
+:103E30000216826400400040021682681E001E00C6
+:103E40000216826C1E001E000216827040004000A6
+:103E500002168274400040000216827880008000C2
+:103E60000216827C800080000216828020002000E2
+:103E700002168284200020000616828800000002BC
+:103E8000021680900000004B021680600000014086
+:103E900002168064000001400616808800000002BF
+:103EA00002168068000000000216806C000000000E
+:103EB00002168070000000C0061680740000000525
+:103EC0000216880C0101010102168810010120046C
+:103ED000021688142008100102168818010101201A
+:103EE0000216881C0101010102168820010120042C
+:103EF00002168824200810010216882801010120DA
+:103F00000216882C200810010216883001010120B9
+:103F100002168834010101010216883801012004CB
+:103F20000216883C20081001021688400101012079
+:103F3000021688440101010102168848010120048B
+:103F40000216E6BC000000000216E6C000000002F7
+:103F50000216E6C4000000040216E6C800000006CF
+:103F60000216E79400000001021680EC000000FF3A
+:103F700002140000000000010215C024000000002F
+:103F80000215C0EC000000010215C0F000000001A5
+:103F90000615C10000000002021400040000000128
+:103FA00002140008000000010214000C00000001CF
+:103FB000021400300000000102140034000000016F
+:103FC0000214004000000001021400440000FFFF42
+:103FD00006140004000000030214000000000000AA
+:103FE000060280000000200002020058000000329B
+:103FF000020200A003150020020200A40315002005
+:10400000020200A801000030020200AC081000000B
+:10401000020200B000000036020200B400000030CE
+:10402000020200B800000031020200BC00000002E1
+:10403000020200C000000005020200C400000002ED
+:10404000020200C800000002020200D000000007C7
+:10405000020200DC00000000020200E00000000597
+:10406000020200E400000003020200F00000000170
+:10407000020200FC00000006020201200000000015
+:104080000202013400000002020201B0000000013F
+:104090000202020C000000010202021400000001F2
+:1040A00002020218000000020202040400000001E3
+:1040B0000202040C00000040020204100000004054
+:1040C0000202041C00000004020204200000002080
+:1040D0000202042400000002020204280000002062
+:1040E000060205000000001204020480002008BF40
+:1040F000020200600000000F0202006400000007DE
+:1041000002020068000000000202006C0000000EC5
+:10411000020200700000000E06020074000000039E
+:10412000020200F40000000402020004000000018A
+:1041300002020008000000010202000C0000000161
+:104140000202001000000001020200140000000141
+:1041500002020018000000010202001C0000000121
+:104160000202002000000001020200240000000101
+:1041700002020028000000010202002C00000001E1
+:1041800002020030000000010202003400000001C1
+:1041900002020038000000010202003C00000001A1
+:1041A0000202004000000001020200440000000181
+:1041B00002020048000000010202004C0000000161
+:1041C000020200500000000102020108000000C8C5
+:1041D0000202011800000002020201C400000000F7
+:1041E000020201CC00000000020201D40000000223
+:1041F000020201DC00000002020201E4000000FFF4
+:10420000020201EC000000FF0202010000000000B9
+:104210000202010C000000C80202011C00000002A2
+:10422000020201C800000000020201D000000000EC
+:10423000020201D800000002020201E000000002B8
+:10424000020201E8000000FF020201F0000000FF8E
+:10425000020201040000002002020108000000C860
+:104260000202011800000002020201C40000000066
+:10427000020201CC00000000020201D40000000292
+:10428000020201DC00000002020201E4000000FF63
+:10429000020201EC000000FF020201000000001019
+:1042A0000202010C000000C80202011C0000000212
+:1042B000020201C800000000020201D0000000005C
+:1042C000020201D800000002020201E00000000228
+:1042D000020201E8000000FF020201F0000000FFFE
+:1042E000020201040000003002020108000000C8C0
+:1042F0000202011800000002020201C400000000D6
+:10430000020201CC00000000020201D40000000201
+:10431000020201DC00000002020201E4000000FFD2
+:10432000020201EC000000FF020201000000004058
+:104330000202010C000000C80202011C0000000281
+:10434000020201C800000000020201D000000000CB
+:10435000020201D800000002020201E00000000297
+:10436000020201E8000000FF020201F0000000FF6D
+:10437000020201040000006002020108000000C8FF
+:104380000202011800000002020201C40000000045
+:10439000020201CC00000000020201D40000000271
+:1043A000020201DC00000002020201E4000000FF42
+:1043B000020201EC000000FF0202010000000050B8
+:1043C0000202010C000000C80202011C00000002F1
+:1043D000020201C800000000020201D0000000003B
+:1043E000020201D800000002020201E00000000207
+:1043F000020201E8000000FF020201F0000000FFDD
+:1044000002020104000000700728040000B300004D
+:10441000082807B8000908DF072C000028CB000097
+:10442000072C8000365D0A33072D0000347017CB4F
+:10443000072D80003A9424E8072E000036C7338EFB
+:10444000072E80001CE94140082EC5D0274608E110
+:10445000022800BC0000003001280000000000001D
+:1044600001280004000000000128000800000000EE
+:104470000128000C000000000128001000000000CE
+:1044800001280014000000000228002000000001A4
+:104490000228002400000002022800280000000377
+:1044A0000228002C00000000022800300000000458
+:1044B000022800340000000102280038000000003B
+:1044C0000228003C00000001022800400000000417
+:1044D00002280044000000000228004800000001FB
+:1044E0000228004C000000030228005000000000D9
+:1044F00002280054000000010228005800000004B7
+:104500000228005C0000000002280060000000019A
+:104510000228006400000003022800680000000078
+:104520000228006C00000001022800700000000456
+:104530000228007400000000022800780000000437
+:104540000228007C00000003062800800000000212
+:10455000022800A400007FFF022800A8000003FF3B
+:10456000022802240000000002280234000000009B
+:104570000228024C00000000022802E40000FFFFB5
+:104580000628200000000800022B8BC0000000015C
+:10459000022B800000000000022B80400000001869
+:1045A000022B80800000000C022B80C000000066FF
+:1045B0000C2B8300000864700A2B83000000015755
+:1045C0000B2B83000000055F0A2B834000000000D6
+:1045D0000C2B8340000002260B2B834000000001BF
+:1045E000022B838000086470022B83C00000022627
+:1045F000022B1480000000010A2B14800000000030
+:10460000022B944000000001062B94480000000299
+:10461000062A9A7000000004042A9A80000408E325
+:10462000062A9A9000000002042A9A98000208E7DD
+:10463000062A900000000048062A2008000000C852
+:10464000062A200000000002062A912800000086A9
+:10465000062AC00000000120062A9348000000033B
+:10466000042A9354000108E9062A9FB000000002C2
+:10467000042A9418000208EA042A9CD0000108ECDD
+:10468000062A9CD400000011042A9D20008F08ED0A
+:10469000062A9F5C00000005042A30000002097C05
+:1046A000062A300800000100062A404000000010E1
+:1046B000042A40000010097E042A84080002098EA2
+:1046C000042ACF4000040990042ACF600002099414
+:1046D000062A9FA000000004062A60000000054092
+:1046E000062A9D1800000002062AB00000000050B3
+:1046F000062ABB7000000070062ABB68000000029A
+:10470000062AB94800000004062AD000000008006C
+:10471000062AC48000000150062A942000000032BE
+:10472000062A502000000002062A50300000000235
+:10473000062A500000000002062A50100000000265
+:10474000022A520800000001042A9AA000020996D9
+:10475000062A95B000000022042A96380001099824
+:10476000062A963C00000003062A96E0000000227C
+:10477000042A976800010999062A976C0000000333
+:10478000062A981000000022042A98980001099A2D
+:10479000062A989C00000003062A99400000002287
+:1047A000042A99C80001099B062A99CC000000033D
+:1047B000062ABB5800000002062AC9C000000150AA
+:1047C000062A94E800000032062A50280000000261
+:1047D000062A503800000002062A50080000000295
+:1047E000062A501800000002022A520C00000001A4
+:1047F000042A9AA80002099C062A96480000002272
+:10480000042A96D00001099E062A96D400000003CF
+:10481000062A977800000022042A98000001099FC8
+:10482000062A980400000003062A98A80000002227
+:10483000042A9930000109A0062A993400000003D7
+:10484000062A99D800000022042A9A60000109A1D2
+:10485000062A9A6400000003062ABB6000000002DA
+:10486000022ACF0000000000042A9AB0001009A21A
+:10487000062A50480000000E022ACF040000000063
+:10488000042A9AF0001009B2062A50800000000E97
+:10489000022ACF0800000000042A9B30001009C241
+:1048A000062A50B80000000E022ACF0C00000000BB
+:1048B000042A9B70001009D2062A50F00000000E56
+:1048C000022ACF1000000000042A9BB0001009E269
+:1048D000062A51280000000E022ACF140000000012
+:1048E000042A9BF0001009F2062A51600000000E15
+:1048F000022ACF1800000000042A9C3000100A028F
+:10490000062A51980000000E022ACF1C0000000069
+:10491000042A9C7000100A12062A51D00000000ED2
+:1049200002101008000000010210105000000001E9
+:10493000021010000003D000021010040000003D1F
+:104940000910180002000A220910110000100C22A0
+:1049500006101140000000080910116000100C3210
+:10496000061011A00000001806102400000000E04E
+:104970000210201C00000000021020200000000196
+:10498000021020C0000000020210200400000001FC
+:104990000210200800000001021030D800000001C1
+:1049A00009103C0000050C420910380000050C47B6
+:1049B0000910392000050C4C09103B0000050C5172
+:1049C000021040D400000030021040D80000003037
+:1049D00006104C00000001000210402800000010EA
+:1049E0000210404400003FFF021040580028000021
+:1049F000021040840084924A0210405800000000D7
+:104A0000021041380000000102104138000000018E
+:104A1000021041380000000102104138000000017E
+:104A2000021041380000000102104138000000016E
+:104A3000021041380000000102104138000000015E
+:104A40000212049001F680400212051400003C108E
+:104A500002120494FFFFFFFF02120498FFFFFFFF02
+:104A60000212049CFFFFFFFF021204A0FFFFFFFFE2
+:104A7000021204A4FFFFFFFF021204A8FFFFFFFFC2
+:104A8000021204ACFFFFFFFF021204B0FFFFFFFFA2
+:104A9000021204B8FFFFFFFF021204BCFFFFFFFF7A
+:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
+:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
+:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
+:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
+:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
+:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
+:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
+:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
+:104B200002120504FFFFFFFF02120508FFFFFFFF4F
+:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
+:104B4000021204D4F800C000021204B4F0005000B5
+:104B500002120390000000080212039C00000008EB
+:104B6000021203A000000008021203A400000002C9
+:104B7000021203BC00000004021203C00000000582
+:104B8000021203C400000004021203D0000000005F
+:104B90000212036C00000001021201BC0000004080
+:104BA000021201C000001808021201C4000008032C
+:104BB000021201C800000803021201CC00000040EC
+:104BC000021201D000000003021201D40000080309
+:104BD000021201D800000803021201DC00000803E1
+:104BE000021201E000010003021201E400000803C8
+:104BF000021201E800000803021201EC00000003A9
+:104C0000021201F000000003021201F40000000390
+:104C1000021201F800000003021201FC0000000370
+:104C2000021202000000000302120204000000034E
+:104C300002120208000000030212020C000000032E
+:104C4000021202100000000302120214000000030E
+:104C500002120218000000030212021C00000003EE
+:104C600002120220000000030212022400000003CE
+:104C700002120228000024030212022C0000002F5E
+:104C80000212023000000009021202340000001972
+:104C900002120238000001840212023C000001836B
+:104CA0000212024000000306021202440000001932
+:104CB00002120248000000060212024C0000030625
+:104CC0000212025000000306021202540000030602
+:104CD0000212025800000C860212025C0000030659
+:104CE00002120260000003060212026400000006C5
+:104CF00002120268000000060212026C00000006A8
+:104D00000212027000000006021202740000000687
+:104D100002120278000000060212027C0000000667
+:104D20000212028000000006021202840000000647
+:104D300002120288000000060212028C0000000627
+:104D40000212029000000006021202940000000607
+:104D500002120298000000060212029C00000006E7
+:104D6000021202A000000306021202A400000013B7
+:104D7000021202A800000006021202B00000100495
+:104D8000021202B400001004021203240010644056
+:104D90000212032800106440021205B40000000152
+:104DA000021205F800000040021205FC0000001984
+:104DB00002120600000000010212066C0000000151
+:104DC000021201B000000001021207D80000000327
+:104DD000021207D800000003021207D800000003E7
+:104DE000021207D800000003021207D800000003D7
+:104DF000021207D800000003021207D800000003C7
+:104E0000021207D8000000030600A0000000000CFA
+:104E10000200A050000000000200A05400000000AA
+:104E20000200A0EC555400000200A0F05555555565
+:104E30000200A0F4000055550200A0F8F0000000A8
+:104E40000200A0FC555400000200A1005555555524
+:104E50000200A104000055550200A108F000000066
+:104E60000200A19C000000000200A1A000010000BF
+:104E70000200A1A4000050140200A1A8000000003C
+:104E80000200A6A8000000000200A6AC000000007E
+:104E90000200A6D0000000000200A45C00000C008C
+:104EA0000200A61C000000030200A070FFF55FFFD7
+:104EB0000200A0740000FFFF0200A078F00003E0F1
+:104EC0000200A07C000000000200A0800000A00002
+:104ED0000600A084000000050200A0980FE000007A
+:104EE0000600A09C000000070200A0B8000004001B
+:104EF0000600A0BC000000030200A0C800001000D3
+:104F00000600A0CC000000030200A0D80000400072
+:104F10000600A0DC000000030200A0E80001000081
+:104F20000600A22C000000040200A688000000FC7D
+:104F30000600A68C000000070200A6F40000000096
+:104F40000200A10CFF5C00000200A110FFF55FFF52
+:104F50000200A1140000FFFF0200A118F00003E00E
+:104F60000200A11C000000000200A1200000A0001F
+:104F70000600A124000000050200A1380FE0000097
+:104F80000600A13C000000070200A1580000080034
+:104F90000600A15C000000030200A16800002000E0
+:104FA0000600A16C000000030200A1780000800050
+:104FB0000600A17C000000030200A188000200009E
+:104FC0000600A23C000000040200A6B0000000FCA5
+:104FD0000600A6B4000000070200A6F800000000CA
+:104FE0000200A030000000000200A0340000000019
+:104FF0000200A038000000000200A03C00000000F9
+:105000000200A040000000000200A04400000000D8
+:105010000200A048000000000200A04C00000000B8
+:10502000020090C40000E000020090CC0000F300F9
+:10503000020090D400000003020091A000000001D3
+:105040000600917000000003020090EC0000600078
+:10505000020090F400007300020090FC00000003C6
+:10506000020091A8000000010600918800000003E2
+:10507000020091000000400002009108000053006F
+:105080000200911000000004020091AC0000000139
+:1050900006009194000000020200919C00000001B3
+:1050A000020090D800006000020090E00000730051
+:1050B000020090E800000003020091A4000000013B
+:1050C0000200917C000000010200918000000001BC
+:1050D00002009184000000000200912800000300FB
+:1050E0000200916C0003F0080200912C0000030004
+:1050F0000200913000000300020091340000030020
+:1051000002009138000003000200913C00000300FF
+:1051100002009140000003000200942C00000001F6
+:1051200002009430000000010200943400000001ED
+:105130000200942C000000010200943000000001E5
+:1051400002009434000000010200942C00000001D1
+:1051500002009430000000010200943400000001BD
+:105160000200942C000000010200943000000001B5
+:1051700002009434000000010200942C00000001A1
+:10518000020094300000000102009434000000018D
+:105190000200942C00000001020094300000000185
+:1051A00002009434000000010200942C0000000171
+:1051B000020094300000000102009434000000015D
+:1051C0000200942C00000001020094300000000155
+:1051D0000200943400000001021300780000003047
+:1051E0000213003C000061A8061301080000000340
+:1051F000021301040000000002130134000000004B
+:10520000061301080000000302130104000000005F
+:10521000021301340000000006130108000000031F
+:10522000021301040000000002130134000000001A
+:10523000061301080000000302130104000000002F
+:1052400002130134000000000613010800000003EF
+:1052500002130104000000000213013400000000EA
+:1052600006130108000000030213010400000000FF
+:1052700002130134000000000613010800000003BF
+:1052800002130104000000000213013400000000BA
+:1052900006130108000000030213010400000000CF
+:1052A0000213013400000000021100B800000001E8
+:1052B0000216E6E8000020000216E6EC00002000DE
+:1052C0000216E6F0000065550216E6F4000065558A
+:1052D00002168150000000000216817400000001D7
+:1052E00002168178000000010216817C0000000196
+:1052F0000216818000000001021681840000000176
+:105300000216818800000001021681B4000000012D
+:10531000021681B800000001021681BC00000001E5
+:10532000021681C000000001021681C400000001C5
+:10533000021681C800000001021681100000000062
+:105340000216824000BF00BF061682440000000221
+:105350000216824C00BF00BF0216E6C40000000126
+:105360000216E6C8000000030216E79400000000E1
+:10537000042ACF40000A0C56000000000000000084
+:1053800000000034000000000000000000000000E9
+:10539000000000000000000000000000000000000D
+:1053A0000000000000000000000000000034003594
+:1053B00000000000000000000000000000000000ED
+:1053C00000000000000000000000000000000000DD
+:1053D0000000000000000000003500600000000038
+:1053E00000000000000000000000000000000000BD
+:1053F00000000000000000000000000000000000AD
+:1054000000000000006000910000000000000000AB
+:1054100000910095009500990099009D009D00A1C4
+:1054200000A100A500A500A900A900AD00AD00B134
+:1054300000B100B500000000000000000000000006
+:10544000000000000000000000000000000000005C
+:1054500000000000000000000000000000B5031183
+:105460000311031B031B03250325032C032C033308
+:105470000333033A033A0341034103480348034F0C
+:10548000034F03560356035D0000000000000000B8
+:10549000000000000000000000000000000000000C
+:1054A00000000000000000000000000000000000FC
+:1054B00000000000000000000000000000000000EC
+:1054C00000000000000000000000000000000000DC
+:1054D00000000000000000000000000000000000CC
+:1054E00000000000000000000000000000000000BC
+:1054F00000000000000000000000000000000000AC
+:10550000000000000000000000000000000000009B
+:10551000000000000000000000000000000000008B
+:10552000000000000000000000000000000000007B
+:105530000000000000000000035D035E00000000AA
+:1055400000000000035E035F035F0360036003610C
+:10555000036103620362036303630364036403651B
+:10556000036503660000000000000000000000006A
+:10557000000000000000000000000000000000002B
+:10558000000000000000000000000000000000001B
+:105590000366036D036D0379037903850000000042
+:1055A00000000000000000000000000000000000FB
+:1055B00000000000000000000000000000000000EB
+:1055C00000000000000000000000000000000000DB
+:1055D00000000000000000000000000000000000CB
+:1055E00000000000000000000385038600000000AA
+:1055F00000000000000000000000000000000000AB
+:10560000000000000000000000000000000000009A
+:1056100000000000038603B100000000000000004D
+:10562000000000000000000000000000000000007A
+:10563000000000000000000000000000000000006A
+:1056400003B103E0000000000000000000000000C3
+:10565000000000000000000000000000000000004A
+:1056600000000000000000000000000003E0040F44
+:105670000000000000000000040F04160416041DC2
+:10568000041D04240424042B042B043204320439A2
+:1056900004390440044004470447047A0000000031
+:1056A00000000000047A047E047E048204820486E2
+:1056B0000486048A048A048E048E0492049204965A
+:1056C0000496049A049A04EA04EA05000500051603
+:1056D000051605180518051A051A051C051C051ED2
+:1056E000051E052005200522052205240524052682
+:1056F00005260693000000000000000006930698AF
+:105700000698069D069D06A206A206A706A706AC59
+:1057100006AC06B106B106B606B606BB06BB06BCAD
+:105720000000000000000000000000000000000079
+:105730000000000000000000000000000000000069
+:10574000000000000000000006BC06E000000000B1
+:105750000000000006E006E206E206E406E406E6D3
+:1057600006E606E806E806EA06EA06EC06EC06EEB9
+:1057700006EE06F006F00705070507080708070B01
+:105780000000000000000000000000000000000019
+:105790000000000000000000000000000000000009
+:1057A000070B074F00000000000000000000000091
+:1057B00000000000000000000000000000000000E9
+:1057C000000000000000000000000000074F07E19B
+:1057D00000000000000000000000000000000000C9
+:1057E00000000000000000000000000000000000B9
+:1057F000000000000000000007E107EF00000000CB
+:105800000000000000000000000000000000000098
+:105810000000000000000000000000000000000088
+:105820000000000007EF082C00000000000000004E
+:10583000082C08350835083E083E08470847085038
+:1058400008500859085908620862086B086B087408
+:10585000087408D508D508EA08EA08FF08FF090215
+:1058600009020905090509080908090B090B090EB0
+:10587000090E09110911091409140917091709203A
+:105880000000000000000000000000000000000018
+:105890000000000000000000000000000000000008
+:1058A00000000000000000000920092600000000A0
+:1058B00000000000000000000000000000000000E8
+:1058C00000000000000000000000000000000000D8
+:1058D000000000000926092B000000000000000065
+:1058E00000000000000000000000000000000000B8
+:1058F00000000000000000000000000000000000A8
+:10590000092B0933000000000000000009330934AE
+:10591000093409350935093609360937093709388F
+:10592000093809390939093A093A093B00000000E8
+:105930000000000000000000000000000000000067
+:105940000000000000000000000000000000000057
+:105950000000000000000000093B09AC000000004E
+:105960000000000009AC09AD09AD09AE09AE09AFF0
+:1059700009AF09B009B009B109B109B209B209B357
+:1059800009B309B409B409C809C809DB09DB09EF7F
+:1059900009EF09F009F009F109F109F209F209F337
+:1059A00009F309F409F409F509F509F609F609F707
+:1059B00009F70A1600000000000000000A160A1984
+:1059C0000A190A1C0A1C0A1F0A1F0A220A220A258F
+:1059D0000A250A280A280A2B0A2B0A2E0A2E0A3020
+:1059E00000000000000000000A300A330A330A36C3
+:1059F0000A360A390A390A3C0A3C0A3F0A3F0A4277
+:105A00000A420A450A450A480A480A4900000000B5
+:105A10000000000000000000000000000000000086
+:105A20000000000000000000000000000000000076
+:105A3000000000000A490A610000000000000000A8
+:105A40000000000000000000000000000000000056
+:105A50000000000000000000000000000000000046
+:105A60000A610A620000000000000000000000005F
+:105A70000000000000000000000000000000000026
+:105A80000000000000000000000000000000000016
+:105A9000000100000002070000030E0000041500D2
+:105AA00000051C000006230000072A000008310042
+:105AB00000093800000A3F00000B4600000C4D00B2
+:105AC000000D5400000E5B00000F62000010690022
+:105AD000001170000012770000137E000014850092
+:105AE00000158C000016930000179A000018A10002
+:105AF0000019A800001AAF00001BB600001CBD0072
+:105B0000001DC400001ECB00001FD2000000D90001
+:105B10000000200000004000000060000000800045
+:105B20000000A0000000C0000000E0000001000034
+:105B30000001200000014000000160000001800021
+:105B40000001A0000001C0000001E0000002000010
+:105B500000022000000240000002600000028000FD
+:105B60000002A0000002C0000002E00000030000EC
+:105B700000032000000340000003600000038000D9
+:105B80000003A0000003C0000003E00000040000C8
+:105B900000042000000440000004600000048000B5
+:105BA0000004A0000004C0000004E00000050000A4
+:105BB0000005200000054000000560000005800091
+:105BC0000005A0000005C0000005E0000006000080
+:105BD000000620000006400000066000000680006D
+:105BE0000006A0000006C0000006E000000700005C
+:105BF0000007200000074000000760000007800049
+:105C00000007A0000007C0000007E0000008000037
+:105C10000008200000084000000860000008800024
+:105C20000008A0000008C0000008E0000009000013
+:105C30000009200000094000000960000009800000
+:105C40000009A0000009C0000009E000000A0000EF
+:105C5000000A2000000A4000000A6000000A8000DC
+:105C6000000AA000000AC000000AE000000B0000CB
+:105C7000000B2000000B4000000B6000000B8000B8
+:105C8000000BA000000BC000000BE000000C0000A7
+:105C9000000C2000000C4000000C6000000C800094
+:105CA000000CA000000CC000000CE000000D000083
+:105CB000000D2000000D4000000D6000000D800070
+:105CC000000DA000000DC000000DE000000E00005F
+:105CD000000E2000000E4000000E6000000E80004C
+:105CE000000EA000000EC000000EE000000F00003B
+:105CF000000F2000000F4000000F6000000F800028
+:105D0000000FA000000FC000000FE0000010000016
+:105D10000010200000104000001060000010800003
+:105D20000010A0000010C0000010E00000110000F2
+:105D300000112000001140000011600000118000DF
+:105D40000011A0000011C0000011E00000120000CE
+:105D500000122000001240000012600000128000BB
+:105D60000012A0000012C0000012E00000130000AA
+:105D70000013200000134000001360000013800097
+:105D80000013A0000013C0000013E0000014000086
+:105D90000014200000144000001460000014800073
+:105DA0000014A0000014C0000014E0000015000062
+:105DB000001520000015400000156000001580004F
+:105DC0000015A0000015C0000015E000001600003E
+:105DD000001620000016400000166000001680002B
+:105DE0000016A0000016C0000016E000001700001A
+:105DF0000017200000174000001760000017800007
+:105E00000017A0000017C0000017E00000180000F5
+:105E100000182000001840000018600000188000E2
+:105E20000018A0000018C0000018E00000190000D1
+:105E300000192000001940000019600000198000BE
+:105E40000019A0000019C0000019E000001A0000AD
+:105E5000001A2000001A4000001A6000001A80009A
+:105E6000001AA000001AC000001AE000001B000089
+:105E7000001B2000001B4000001B6000001B800076
+:105E8000001BA000001BC000001BE000001C000065
+:105E9000001C2000001C4000001C6000001C800052
+:105EA000001CA000001CC000001CE000001D000041
+:105EB000001D2000001D4000001D6000001D80002E
+:105EC000001DA000001DC000001DE000001E00001D
+:105ED000001E2000001E4000001E6000001E80000A
+:105EE000001EA000001EC000001EE000001F0000F9
+:105EF000001F2000001F4000001F6000001F8000E6
+:105F0000001FA000001FC000001FE00000200000D4
+:105F100000202000002040000020600000208000C1
+:105F20000020A0000020C0000020E00000210000B0
+:105F3000002120000021400000216000002180009D
+:105F40000021A0000021C0000021E000002200008C
+:105F50000022200000224000002260000022800079
+:105F60000022A0000022C0000022E0000023000068
+:105F70000023200000234000002360000023800055
+:105F80000023A0000023C0000023E0000024000044
+:105F90000024200000244000002460000024800031
+:105FA0000024A0000024C0000024E0000025000020
+:105FB000002520000025400000256000002580000D
+:105FC0000025A0000025C0000025E00000260000FC
+:105FD00000262000002640000026600000268000E9
+:105FE0000026A0000026C0000026E00000270000D8
+:105FF00000272000002740000027600000278000C5
+:106000000027A0000027C0000027E00000280000B3
+:1060100000282000002840000028600000288000A0
+:106020000028A0000028C0000028E000002900008F
+:10603000002920000029400000296000002980007C
+:106040000029A0000029C0000029E000002A00006B
+:10605000002A2000002A4000002A6000002A800058
+:10606000002AA000002AC000002AE000002B000047
+:10607000002B2000002B4000002B6000002B800034
+:10608000002BA000002BC000002BE000002C000023
+:10609000002C2000002C4000002C6000002C800010
+:1060A000002CA000002CC000002CE000002D0000FF
+:1060B000002D2000002D4000002D6000002D8000EC
+:1060C000002DA000002DC000002DE000002E0000DB
+:1060D000002E2000002E4000002E6000002E8000C8
+:1060E000002EA000002EC000002EE000002F0000B7
+:1060F000002F2000002F4000002F6000002F8000A4
+:10610000002FA000002FC000002FE0000030000092
+:10611000003020000030400000306000003080007F
+:106120000030A0000030C0000030E000003100006E
+:10613000003120000031400000316000003180005B
+:106140000031A0000031C0000031E000003200004A
+:106150000032200000324000003260000032800037
+:106160000032A0000032C0000032E0000033000026
+:106170000033200000334000003360000033800013
+:106180000033A0000033C0000033E0000034000002
+:1061900000342000003440000034600000348000EF
+:1061A0000034A0000034C0000034E00000350000DE
+:1061B00000352000003540000035600000358000CB
+:1061C0000035A0000035C0000035E00000360000BA
+:1061D00000362000003640000036600000368000A7
+:1061E0000036A0000036C0000036E0000037000096
+:1061F0000037200000374000003760000037800083
+:106200000037A0000037C0000037E0000038000071
+:10621000003820000038400000386000003880005E
+:106220000038A0000038C0000038E000003900004D
+:10623000003920000039400000396000003980003A
+:106240000039A0000039C0000039E000003A000029
+:10625000003A2000003A4000003A6000003A800016
+:10626000003AA000003AC000003AE000003B000005
+:10627000003B2000003B4000003B6000003B8000F2
+:10628000003BA000003BC000003BE000003C0000E1
+:10629000003C2000003C4000003C6000003C8000CE
+:1062A000003CA000003CC000003CE000003D0000BD
+:1062B000003D2000003D4000003D6000003D8000AA
+:1062C000003DA000003DC000003DE000003E000099
+:1062D000003E2000003E4000003E6000003E800086
+:1062E000003EA000003EC000003EE000003F000075
+:1062F000003F2000003F4000003F6000003F800062
+:10630000003FA000003FC000003FE000003FE00170
+:1063100000000000000001FF0000020000007FF804
+:1063200000007FF800000A90000035000000000126
+:106330000000FF00000000000000FF00000000005F
+:106340000000FF00000000000000FF00000000004F
+:106350000000FF00000000000000FF00000000003F
+:106360000000FF00000000000000FF00000000002F
+:106370000000FF00000000000000FF00000000001F
+:106380000000FF00000000000000FF00000000000F
+:106390000000FF00000000000000FF0000000000FF
+:1063A0000000FF00000000000000FF0000000000EF
+:1063B0000000FF00000000000000FF0000000000DF
+:1063C0000000FF00000000000000FF0000000000CF
+:1063D0000000FF00000000000000FF0000000000BF
+:1063E0000000FF00000000000000FF0000000000AF
+:1063F0000000FF00000000000000FF00000000009F
+:106400000000FF00000000000000FF00000000008E
+:106410000000FF00000000000000FF00000000007E
+:106420000000FF00000000000000FF00000000006E
+:106430000000FF00000000000000FF00000000005E
+:106440000000FF00000000000000FF00000000004E
+:106450000000FF00000000000000FF00000000003E
+:106460000000FF00000000000000FF00000000002E
+:106470000000FF00000000000000FF00000000001E
+:106480000000FF00000000000000FF00000000000E
+:106490000000FF00000000000000FF0000000000FE
+:1064A0000000FF00000000000000FF0000000000EE
+:1064B0000000FF00000000000000FF0000000000DE
+:1064C0000000FF00000000000000FF0000000000CE
+:1064D0000000FF00000000000000FF0000000000BE
+:1064E0000000FF00000000000000FF0000000000AE
+:1064F0000000FF00000000000000FF00000000009E
+:106500000000FF00000000000000FF00000000008D
+:106510000000FF00000000000000FF00000000007D
+:106520000000FF00000000000000FF00000000006D
+:106530000000FF00000000000000FF00000000005D
+:106540000000FF00000000000000FF00000000004D
+:106550000000FF00000000000000FF00000000003D
+:106560000000FF00000000000000FF00000000002D
+:1065700000000000140AFF000000000100000000FD
+:106580000020100100000000010090000000010048
+:1065900000009002000090040000900600009008A7
+:1065A0000000900A0000900C0000900E0000901077
+:1065B0000000901200009014000090160000901847
+:1065C0000000901A0000901C0000901E0000902017
+:1065D00000009022000090240000902600009028E7
+:1065E0000000902A0000902C0000902E00009030B7
+:1065F0000000903200009034000090360000903887
+:106600000000903A0000903C0000903E0000904056
+:106610000000904200009044000090460000904826
+:106620000000904A0000904C0000904E00009050F6
+:1066300000009052000090540000905600009058C6
+:106640000000905A0000905C0000905E0000906096
+:106650000000906200009064000090660000906866
+:106660000000906A0000906C0000906E0000907036
+:106670000000907200009074000090760000907806
+:106680000000907A0000907C0000907E00009080D6
+:1066900000009082000090840000908600009088A6
+:1066A0000000908A0000908C0000908E0000909076
+:1066B0000000909200009094000090960000909846
+:1066C0000000909A0000909C0000909E000090A016
+:1066D000000090A2000090A4000090A6000090A8E6
+:1066E000000090AA000090AC000090AE000090B0B6
+:1066F000000090B2000090B4000090B6000090B886
+:10670000000090BA000090BC000090BE000090C055
+:10671000000090C2000090C4000090C6000090C825
+:10672000000090CA000090CC000090CE000090D0F5
+:10673000000090D2000090D4000090D6000090D8C5
+:10674000000090DA000090DC000090DE000090E095
+:10675000000090E2000090E4000090E6000090E865
+:10676000000090EA000090EC000090EE000090F035
+:10677000000090F2000090F4000090F6000090F805
+:10678000000090FA000090FC000090FE00009100D4
+:1067900000009102000091040000910600009108A1
+:1067A0000000910A0000910C0000910E0000911071
+:1067B0000000911200009114000091160000911841
+:1067C0000000911A0000911C0000911E0000912011
+:1067D00000009122000091240000912600009128E1
+:1067E0000000912A0000912C0000912E00009130B1
+:1067F0000000913200009134000091360000913881
+:106800000000913A0000913C0000913E0000914050
+:106810000000914200009144000091460000914820
+:106820000000914A0000914C0000914E00009150F0
+:1068300000009152000091540000915600009158C0
+:106840000000915A0000915C0000915E0000916090
+:106850000000916200009164000091660000916860
+:106860000000916A0000916C0000916E0000917030
+:106870000000917200009174000091760000917800
+:106880000000917A0000917C0000917E00009180D0
+:1068900000009182000091840000918600009188A0
+:1068A0000000918A0000918C0000918E0000919070
+:1068B0000000919200009194000091960000919840
+:1068C0000000919A0000919C0000919E000091A010
+:1068D000000091A2000091A4000091A6000091A8E0
+:1068E000000091AA000091AC000091AE000091B0B0
+:1068F000000091B2000091B4000091B6000091B880
+:10690000000091BA000091BC000091BE000091C04F
+:10691000000091C2000091C4000091C6000091C81F
+:10692000000091CA000091CC000091CE000091D0EF
+:10693000000091D2000091D4000091D6000091D8BF
+:10694000000091DA000091DC000091DE000091E08F
+:10695000000091E2000091E4000091E6000091E85F
+:10696000000091EA000091EC000091EE000091F02F
+:10697000000091F2000091F4000091F6000091F8FF
+:10698000000091FA000091FC000091FEFFFFFFFF64
+:10699000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:1069A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
+:1069B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:1069C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
+:1069D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:1069E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
+:1069F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:106A0000FFFFFFFFFFFFFFFFFFFFFFFF000000038F
+:106A100000BEBC20000000000000000500000003D4
+:106A200000BEBC20000000000000000500000003C4
+:106A300000BEBC20000000000000000500000003B4
+:106A400000BEBC20000000000000000500000003A4
+:106A500000BEBC2000000000000000050000000394
+:106A600000BEBC2000000000000000050000000384
+:106A700000BEBC2000000000000000050000000374
+:106A800000BEBC2000000000000000050000200047
+:106A9000000040C000006180000082400000A300B0
+:106AA0000000C3C00000E480000105400001260092
+:106AB000000146C000016780000188400001A90074
+:106AC0000001C9C00001EA8000020B4000022C0056
+:106AD00000024CC000026D8000028E400002AF0038
+:106AE0000002CFC00002F0800000114000008000D2
+:106AF000000103800001870000020A8000028E006E
+:106B000000031180000395000004188000049C001D
+:106B100000051F800005A300000626800006AA00CD
+:106B200000072D800007B100000834800008B8007D
+:106B300000093B800009BF00000A4280000AC6002D
+:106B4000000B4980000BCD00000C5080000CD400DD
+:106B5000000D578000005B0000007FF800007FF808
+:106B60000000022A000035000000FF0000000000C5
+:106B70000000FF00000000000000FF000000000017
+:106B80000000FF00000000000000FF000000000007
+:106B90000000FF00000000000000FF0000000000F7
+:106BA0000000FF00000000000000FF0000000000E7
+:106BB0000000FF00000000000000FF0000000000D7
+:106BC0000000FF00000000000000FF0000000000C7
+:106BD0000000FF00000000000000FF0000000000B7
+:106BE0000000FF00000000000000FF0000000000A7
+:106BF0000000FF00000000000000FF000000000097
+:106C00000000FF00000000000000FF000000000086
+:106C10000000FF00000000000000FF000000000076
+:106C20000000FF00000000000000FF000000000066
+:106C30000000FF00000000000000FF000000000056
+:106C40000000FF00000000000000FF000000000046
+:106C50000000FF00000000000000FF000000000036
+:106C60000000FF00000000000000FF000000000026
+:106C70000000FF00000000000000FF000000000016
+:106C80000000FF00000000000000FF000000000006
+:106C90000000FF00000000000000FF0000000000F6
+:106CA0000000FF00000000000000FF0000000000E6
+:106CB0000000FF00000000000000FF0000000000D6
+:106CC0000000FF00000000000000FF0000000000C6
+:106CD0000000FF00000000000000FF0000000000B6
+:106CE0000000FF00000000000000FF0000000000A6
+:106CF0000000FF00000000000000FF000000000096
+:106D00000000FF00000000000000FF000000000085
+:106D10000000FF00000000000000FF000000000075
+:106D20000000FF00000000000000FF000000000065
+:106D30000000FF00000000000000FF000000000055
+:106D40000000FF00000000000000FF000000000045
+:106D50000000FF00000000000000FF000000000035
+:106D60000000FF00000000000000FF000000000025
+:106D70000000FF00000000000000FF000000000015
+:106D80000000FF00000000000000FF000000000005
+:106D90000000FF00000000000000FF0000000000F5
+:106DA0000000FF00000019000000000000000000CB
+:106DB000FFFFFFFF000000000393870000000000BA
+:106DC0000393870000007FF800007FF800000BA30A
+:106DD00000001500000000FF000000FF000000FFA1
+:106DE000000000FF000000FF000000FF000000FFA7
+:106DF000000000FF0000FF00000000000000FF0096
+:106E0000000000000000FF00000000000000FF0084
+:106E1000000000000000FF00000000000000FF0074
+:106E2000000000000000FF00000000000000FF0064
+:106E3000000000000000FF00000000000000FF0054
+:106E4000000000000000FF00000000000000FF0044
+:106E5000000000000000FF00000000000000FF0034
+:106E6000000000000000FF00000000000000FF0024
+:106E7000000000000000FF00000000000000FF0014
+:106E8000000000000000FF00000000000000FF0004
+:106E9000000000000000FF00000000000000FF00F4
+:106EA000000000000000FF00000000000000FF00E4
+:106EB000000000000000FF00000000000000FF00D4
+:106EC000000000000000FF00000000000000FF00C4
+:106ED000000000000000FF00000000000000FF00B4
+:106EE000000000000000FF00000000000000FF00A4
+:106EF000000000000000FF00000000000000FF0094
+:106F0000000000000000FF00000000000000FF0083
+:106F1000000000000000FF00000000000000FF0073
+:106F2000000000000000FF00000000000000FF0063
+:106F3000000000000000FF00000000000000FF0053
+:106F4000000000000000FF00000000000000FF0043
+:106F5000000000000000FF00000000000000FF0033
+:106F6000000000000000FF00000000000000FF0023
+:106F7000000000000000FF00000000000000FF0013
+:106F8000000000000000FF00000000000000FF0003
+:106F9000000000000000FF00000000000000FF00F3
+:106FA000000000000000FF00000000000000FF00E3
+:106FB000000000000000FF00000000000000FF00D3
+:106FC000000000000000FF00000000000000FF00C3
+:106FD000000000000000FF00000000000000FF00B3
+:106FE000000000000000FF00000000000000FF00A3
+:106FF000000000000000FF00000000000000FF0093
+:10700000000000000000FF00000000000000FF0082
+:10701000000000000000FF00000000000000FF0072
+:10702000000000000000FF00000000000000FF0062
+:1070300000000000FFFFFFFFFFFFFFFFFFFFFFFF5C
+:10704000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
+:10705000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
+:10706000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
+:10707000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
+:10708000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
+:10709000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
+:1070A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0
+:1070B000FFFFFFFF00000000000028AD00002918BE
+:1070C0000000291900000005000000070000FF0073
+:1070D0000FFFFFFF0000FF000FFFFFFF000000FF9A
+:1070E0000000FF000000FF000FFFFFFF0000FF0097
+:1070F0000FFFFFFF000000FF0000FF000000FF0087
+:107100000FFFFFFF0000FF000FFFFFFF000000FF69
+:107110000000FF000000FF000FFFFFFF0000FF0066
+:107120000FFFFFFF000000FF0000FF000000FF0056
+:107130000FFFFFFF0000FF000FFFFFFF000000FF39
+:107140000000FF000000FF000FFFFFFF0000FF0036
+:107150000FFFFFFF000000FF0000FF000000FF0026
+:107160000FFFFFFF0000FF000FFFFFFF000000FF09
+:107170000000FF000000FF000FFFFFFF0000FF0006
+:107180000FFFFFFF000000FF0000FF000000FF00F6
+:107190000FFFFFFF0000FF000FFFFFFF000000FFD9
+:1071A0000000FF000000FF000FFFFFFF0000FF00D6
+:1071B0000FFFFFFF000000FF0000FF000000FF00C6
+:1071C0000FFFFFFF0000FF000FFFFFFF000000FFA9
+:1071D0000000FF000000FF000FFFFFFF0000FF00A6
+:1071E0000FFFFFFF000000FF0000FF000000FF0096
+:1071F0000FFFFFFF0000FF000FFFFFFF000000FF79
+:107200000000FF000000FF000FFFFFFF0000FF0075
+:107210000FFFFFFF000000FF0000FF000000FF0065
+:107220000FFFFFFF0000FF000FFFFFFF000000FF48
+:107230000000FF000000FF000FFFFFFF0000FF0045
+:107240000FFFFFFF000000FF0000FF000000FF0035
+:107250000FFFFFFF0000FF000FFFFFFF000000FF18
+:107260000000FF000000FF000FFFFFFF0000FF0015
+:107270000FFFFFFF000000FF0000FF000000FF0005
+:107280000FFFFFFF0000FF000FFFFFFF000000FFE8
+:107290000000FF000000FF000FFFFFFF0000FF00E5
+:1072A0000FFFFFFF000000FF0000FF000000FF00D5
+:1072B0000FFFFFFF0000FF000FFFFFFF000000FFB8
+:1072C0000000FF000000FF000FFFFFFF0000FF00B5
+:1072D0000FFFFFFF000000FF0000FF000000FF00A5
+:1072E0000FFFFFFF0000FF000FFFFFFF000000FF88
+:1072F0000000FF000000FF000FFFFFFF0000FF0085
+:107300000FFFFFFF000000FF0000FF000000FF0074
+:107310000FFFFFFF0000FF000FFFFFFF000000FF57
+:107320000000FF000000FF000FFFFFFF0000FF0054
+:107330000FFFFFFF000000FF0000FF000000FF0044
+:107340000FFFFFFF0000FF000FFFFFFF000000FF27
+:107350000000FF000000FF000FFFFFFF0000FF0024
+:107360000FFFFFFF000000FF0000FF000000FF0014
+:107370000FFFFFFF0000FF000FFFFFFF000000FFF7
+:107380000000FF000000FF000FFFFFFF0000FF00F4
+:107390000FFFFFFF000000FF0000FF000000FF00E4
+:1073A0000FFFFFFF0000FF000FFFFFFF000000FFC7
+:1073B0000000FF000000FF000FFFFFFF0000FF00C4
+:1073C0000FFFFFFF000000FF0000FF000000FF00B4
+:1073D0000FFFFFFF0000FF000FFFFFFF000000FF97
+:1073E0000000FF000000FF000FFFFFFF0000FF0094
+:1073F0000FFFFFFF000000FF0000FF000000FF0084
+:107400000FFFFFFF0000FF000FFFFFFF000000FF66
+:107410000000FF000000FF000FFFFFFF0000FF0063
+:107420000FFFFFFF000000FF0000FF000000FF0053
+:107430000FFFFFFF0000FF000FFFFFFF000000FF36
+:107440000000FF000000FF000FFFFFFF0000FF0033
+:107450000FFFFFFF000000FF0000FF000000FF0023
+:107460000FFFFFFF0000FF000FFFFFFF000000FF06
+:107470000000FF000000FF000FFFFFFF0000FF0003
+:107480000FFFFFFF000000FF0000FF000000FF00F3
+:107490000FFFFFFF0000FF000FFFFFFF000000FFD6
+:1074A0000000FF000000FF000FFFFFFF0000FF00D3
+:1074B0000FFFFFFF000000FF0000FF000000FF00C3
+:1074C0000FFFFFFF0000FF000FFFFFFF000000FFA6
+:1074D0000000FF000000FF000FFFFFFF0000FF00A3
+:1074E0000FFFFFFF000000FF0000FF000000FF0093
+:1074F0000FFFFFFF0000FF000FFFFFFF000000FF76
+:107500000000FF000000FF000FFFFFFF0000FF0072
+:107510000FFFFFFF000000FF0000FF000000FF0062
+:107520000FFFFFFF0000FF000FFFFFFF000000FF45
+:107530000000FF000000FF000FFFFFFF0000FF0042
+:107540000FFFFFFF000000FF0000FF000000FF0032
+:107550000FFFFFFF0000FF000FFFFFFF000000FF15
+:107560000000FF000000FF000FFFFFFF0000FF0012
+:107570000FFFFFFF000000FF0000FF000000FF0002
+:107580000FFFFFFF0000FF000FFFFFFF000000FFE5
+:107590000000FF000000FF000FFFFFFF0000FF00E2
+:1075A0000FFFFFFF000000FF0000FF000000FF00D2
+:1075B0000FFFFFFF0000FF000FFFFFFF000000FFB5
+:1075C0000000FF000000FF000FFFFFFF0000FF00B2
+:1075D0000FFFFFFF000000FF0000FF000000FF00A2
+:1075E0000FFFFFFF0000FF000FFFFFFF000000FF85
+:1075F0000000FF000000FF000FFFFFFF0000FF0082
+:107600000FFFFFFF000000FF0000FF000000FF0071
+:107610000FFFFFFF0000FF000FFFFFFF000000FF54
+:107620000000FF000000FF000FFFFFFF0000FF0051
+:107630000FFFFFFF000000FF0000FF000000FF0041
+:107640000FFFFFFF0000FF000FFFFFFF000000FF24
+:107650000000FF000000FF000FFFFFFF0000FF0021
+:107660000FFFFFFF000000FF0000FF000000FF0011
+:107670000FFFFFFF0000FF000FFFFFFF000000FFF4
+:107680000000FF000000FF000FFFFFFF0000FF00F1
+:107690000FFFFFFF000000FF0000FF000000FF00E1
+:1076A0000FFFFFFF0000FF000FFFFFFF000000FFC4
+:1076B0000000FF000000FF000FFFFFFF0000FF00C1
+:1076C0000FFFFFFF000000FF0000FF000000FF00B1
+:1076D0000FFFFFFF0000FF000FFFFFFF000000FF94
+:1076E0000000FF000000FF000FFFFFFF0000FF0091
+:1076F0000FFFFFFF000000FF0000FF000000FF0081
+:107700000FFFFFFF0000FF000FFFFFFF000000FF63
+:107710000000FF000000FF000FFFFFFF0000FF0060
+:107720000FFFFFFF000000FF0000FF000000FF0050
+:107730000FFFFFFF0000FF000FFFFFFF000000FF33
+:107740000000FF000000FF000FFFFFFF0000FF0030
+:107750000FFFFFFF000000FF0000FF000000FF0020
+:107760000FFFFFFF0000FF000FFFFFFF000000FF03
+:107770000000FF000000FF000FFFFFFF0000FF0000
+:107780000FFFFFFF000000FF0000FF000000FF00F0
+:107790000FFFFFFF0000FF000FFFFFFF000000FFD3
+:1077A0000000FF000000FF000FFFFFFF0000FF00D0
+:1077B0000FFFFFFF000000FF0000FF000000FF00C0
+:1077C0000FFFFFFF0000FF000FFFFFFF000000FFA3
+:1077D0000000FF000000FF000FFFFFFF0000FF00A0
+:1077E0000FFFFFFF000000FF0000FF000000FF0090
+:1077F0000FFFFFFF0000FF000FFFFFFF000000FF73
+:107800000000FF000000FF000FFFFFFF0000FF006F
+:107810000FFFFFFF000000FF0000FF000000FF005F
+:107820000FFFFFFF0000FF000FFFFFFF000000FF42
+:107830000000FF000000FF000FFFFFFF0000FF003F
+:107840000FFFFFFF000000FF0000FF000000FF002F
+:107850000FFFFFFF0000FF000FFFFFFF000000FF12
+:107860000000FF000000FF000FFFFFFF0000FF000F
+:107870000FFFFFFF000000FF0000FF000000FF00FF
+:107880000FFFFFFF0000FF000FFFFFFF000000FFE2
+:107890000000FF000000FF000FFFFFFF0000FF00DF
+:1078A0000FFFFFFF000000FF0000FF000000FF00CF
+:1078B0000FFFFFFF0000FF000FFFFFFF000000FFB2
+:1078C0000000FF000000FF000FFFFFFF0000FF00AF
+:1078D0000FFFFFFF000000FF0000FF000000FF009F
+:1078E0000FFFFFFF0000FF000FFFFFFF000000FF82
+:1078F0000000FF000000FF000FFFFFFF0000FF007F
+:107900000FFFFFFF000000FF0000FF000000FF006E
+:107910000FFFFFFF0000FF000FFFFFFF000000FF51
+:107920000000FF000000FF000FFFFFFF0000FF004E
+:107930000FFFFFFF000000FF0000FF000000FF003E
+:107940000FFFFFFF0000FF000FFFFFFF000000FF21
+:107950000000FF000000FF000FFFFFFF0000FF001E
+:107960000FFFFFFF000000FF0000FF000000FF000E
+:107970000FFFFFFF0000FF000FFFFFFF000000FFF1
+:107980000000FF000000FF000FFFFFFF0000FF00EE
+:107990000FFFFFFF000000FF0000FF000000FF00DE
+:1079A0000FFFFFFF0000FF000FFFFFFF000000FFC1
+:1079B0000000FF000000FF000FFFFFFF0000FF00BE
+:1079C0000FFFFFFF000000FF0000FF000000FF00AE
+:1079D0000FFFFFFF0000FF000FFFFFFF000000FF91
+:1079E0000000FF000000FF000FFFFFFF0000FF008E
+:1079F0000FFFFFFF000000FF0000FF000000FF007E
+:107A00000FFFFFFF0000FF000FFFFFFF000000FF60
+:107A10000000FF000000FF000FFFFFFF0000FF005D
+:107A20000FFFFFFF000000FF0000FF000000FF004D
+:107A30000FFFFFFF0000FF000FFFFFFF000000FF30
+:107A40000000FF000000FF000FFFFFFF0000FF002D
+:107A50000FFFFFFF000000FF0000FF000000FF001D
+:107A60000FFFFFFF0000FF000FFFFFFF000000FF00
+:107A70000000FF000000FF000FFFFFFF0000FF00FD
+:107A80000FFFFFFF000000FF0000FF000000FF00ED
+:107A90000FFFFFFF0000FF000FFFFFFF000000FFD0
+:107AA0000000FF000000FF000FFFFFFF0000FF00CD
+:107AB0000FFFFFFF000000FF0000FF000000FF00BD
+:107AC0000FFFFFFF0000FF000FFFFFFF000000FFA0
+:107AD0000000FF000000FF000FFFFFFF0000FF009D
+:107AE0000FFFFFFF000000FF0000FF000000FF008D
+:107AF0000FFFFFFF0000FF000FFFFFFF000000FF70
+:107B00000000FF000000FF000FFFFFFF0000FF006C
+:107B10000FFFFFFF000000FF0000FF000000FF005C
+:107B20000FFFFFFF0000FF000FFFFFFF000000FF3F
+:107B30000000FF000000FF000FFFFFFF0000FF003C
+:107B40000FFFFFFF000000FF0000FF000000FF002C
+:107B50000FFFFFFF0000FF000FFFFFFF000000FF0F
+:107B60000000FF000000FF000FFFFFFF0000FF000C
+:107B70000FFFFFFF000000FF0000FF000000FF00FC
+:107B80000FFFFFFF0000FF000FFFFFFF000000FFDF
+:107B90000000FF000000FF000FFFFFFF0000FF00DC
+:107BA0000FFFFFFF000000FF0000FF000000FF00CC
+:107BB0000FFFFFFF0000FF000FFFFFFF000000FFAF
+:107BC0000000FF000000FF000FFFFFFF0000FF00AC
+:107BD0000FFFFFFF000000FF0000FF000000FF009C
+:107BE0000FFFFFFF0000FF000FFFFFFF000000FF7F
+:107BF0000000FF000000FF000FFFFFFF0000FF007C
+:107C00000FFFFFFF000000FF0000FF000000FF006B
+:107C10000FFFFFFF0000FF000FFFFFFF000000FF4E
+:107C20000000FF000000FF000FFFFFFF0000FF004B
+:107C30000FFFFFFF000000FF0000FF000000FF003B
+:107C40000FFFFFFF0000FF000FFFFFFF000000FF1E
+:107C50000000FF000000FF000FFFFFFF0000FF001B
+:107C60000FFFFFFF000000FF0000FF000000FF000B
+:107C70000FFFFFFF0000FF000FFFFFFF000000FFEE
+:107C80000000FF000000FF000FFFFFFF0000FF00EB
+:107C90000FFFFFFF000000FF0000FF000000FF00DB
+:107CA0000FFFFFFF0000FF000FFFFFFF000000FFBE
+:107CB0000000FF000000FF000FFFFFFF0000FF00BB
+:107CC0000FFFFFFF000000FF0000FF000000FF00AB
+:107CD0000FFFFFFF0000FF000FFFFFFF000000FF8E
+:107CE0000000FF000000FF000FFFFFFF0000FF008B
+:107CF0000FFFFFFF000000FF0000FF000000FF007B
+:107D00000FFFFFFF0000FF000FFFFFFF000000FF5D
+:107D10000000FF000000FF000FFFFFFF0000FF005A
+:107D20000FFFFFFF000000FF0000FF000000FF004A
+:107D30000FFFFFFF0000FF000FFFFFFF000000FF2D
+:107D40000000FF000000FF000FFFFFFF0000FF002A
+:107D50000FFFFFFF000000FF0000FF000000FF001A
+:107D60000FFFFFFF0000FF000FFFFFFF000000FFFD
+:107D70000000FF000000FF000FFFFFFF0000FF00FA
+:107D80000FFFFFFF000000FF0000FF0000001000D9
+:107D900000002080000031000000418000005200FF
+:107DA00000006280000073000000838000009400E7
+:107DB0000000A4800000B5000000C5800000D600CF
+:107DC0000000E6800000F7000001078000011800B5
+:107DD00000012880000139000001498000015A009B
+:107DE00000016A8000017B0000018B8000019C0083
+:107DF0000001AC800001BD000001CD800001DE006B
+:107E00000001EE800001FF0000000F8000007FF8FD
+:107E100000007FF8000005F60000350010000000AB
+:107E2000000028AD000029180000291900000005F5
+:107E3000000000060001000100090206CCCCCCC9FC
+:107E40007058103C0000FF00000000000000FF0020
+:107E5000000000000000FF00000000000000FF0024
+:107E6000000000000000FF00000000000000FF0014
+:107E7000000000000000FF00000000000000FF0004
+:107E8000000000000000FF00000000000000FF00F4
+:107E9000000000000000FF00000000000000FF00E4
+:107EA000000000000000FF00000000000000FF00D4
+:107EB000000000000000FF00000000000000FF00C4
+:107EC000000000000000FF00000000000000FF00B4
+:107ED000000000000000FF00000000000000FF00A4
+:107EE000000000000000FF00000000000000FF0094
+:107EF000000000000000FF00000000000000FF0084
+:107F0000000000000000FF00000000000000FF0073
+:107F1000000000000000FF00000000000000FF0063
+:107F2000000000000000FF00000000000000FF0053
+:107F3000000000000000FF00000000000000FF0043
+:107F4000000000000000FF00000000000000FF0033
+:107F5000000000000000FF00000000000000FF0023
+:107F6000000000000000FF00000000000000FF0013
+:107F7000000000000000FF00000000000000FF0003
+:107F8000000000000000FF00000000000000FF00F3
+:107F9000000000000000FF00000000000000FF00E3
+:107FA000000000000000FF00000000000000FF00D3
+:107FB000000000000000FF00000000000000FF00C3
+:107FC000000000000000FF00000000000000FF00B3
+:107FD000000000000000FF00000000000000FF00A3
+:107FE000000000000000FF00000000000000FF0093
+:107FF000000000000000FF00000000000000FF0083
+:10800000000000000000FF00000000000000FF0072
+:10801000000000000000FF00000000000000FF0062
+:10802000000000000000FF00000000000000FF0052
+:10803000000000000000FF00000000000000FF0042
+:10804000000000000000FF00000000000000FF0032
+:10805000000000000000FF00000000000000FF0022
+:10806000000000000000FF00000000000000FF0012
+:10807000000000000000FF00000000000000FF0002
+:108080000000000000000001CCCC0201CCCCCCCC24
+:10809000CCCC0201CCCCCCCCCCCC0201CCCCCCCC4A
+:1080A000CCCC0201CCCCCCCCCCCC0201CCCCCCCC3A
+:1080B000CCCC0201CCCCCCCCCCCC0201CCCCCCCC2A
+:1080C000CCCC0201CCCCCCCC00000000FFFFFFFFE9
+:1080D000030303031342020250505020706080508B
+:1080E0000200020006040604000E0000011600D67D
+:1080F000002625A0002625A0002625A0002625A0D4
+:1081000000720000012300F3002625A0002625A010
+:10811000002625A0002625A00000FFFF000000008B
+:108120000000FFFF000000000000FFFF0000000053
+:108130000000FFFF000000000000FFFF0000000043
+:108140000000FFFF000000000000FFFF0000000033
+:108150000000FFFF000000000000FFFF0000000023
+:108160000000FFFF000000000000FFFF0000000013
+:108170000000FFFF000000000000FFFF0000000003
+:108180000000FFFF000000000000FFFF00000000F3
+:108190000000FFFF000000000000FFFF00000000E3
+:1081A0000000FFFF000000000000FFFF00000000D3
+:1081B0000000FFFF000000000000FFFF00000000C3
+:1081C0000000FFFF000000000000FFFF00000000B3
+:1081D0000000FFFF000000000000FFFF00000000A3
+:1081E0000000FFFF000000000000FFFF0000000093
+:1081F0000000FFFF000000000000FFFF0000000083
+:108200000000FFFF000000000000FFFF0000000072
+:108210000000FFFF000000000000FFFF0000000062
+:108220000000FFFF000000000000FFFF0000000052
+:108230000000FFFF000000000000FFFF0000000042
+:108240000000FFFF000000000000FFFF0000000032
+:108250000000FFFF000000000000FFFF0000000022
+:108260000000FFFF000000000000FFFF0000000012
+:108270000000FFFF000000000000FFFF0000000002
+:108280000000FFFF000000000000FFFF00000000F2
+:108290000000FFFF000000000000FFFF00000000E2
+:1082A0000000FFFF000000000000FFFF00000000D2
+:1082B0000000FFFF000000000000FFFF00000000C2
+:1082C0000000FFFF000000000000FFFF00000000B2
+:1082D0000000FFFF000000000000FFFF00000000A2
+:1082E0000000FFFF000000000000FFFF0000000092
+:1082F0000000FFFF000000000000FFFF0000000082
+:108300000000FFFF000000000000FFFF0000000071
+:108310000000FFFF00000000FFFFFFF3318FFFFFB1
+:108320000C30C30CC30C30C3CF3CF300F3CF3CF391
+:108330000000CF3CCDCDCDCDFFFFFFF130EFFFFFF3
+:108340000C30C30CC30C30C3CF3CF300F3CF3CF371
+:108350000001CF3CCDCDCDCDFFFFFFF6305FFFFF5D
+:108360000C30C30CC30C30C3CF3CF300F3CF3CF351
+:108370000002CF3CCDCDCDCDFFFFF4061CBFFFFFEB
+:108380000C30C305C30C30C3CF300014F3CF3CF323
+:108390000004CF3CCDCDCDCDFFFFFFF2304FFFFF2E
+:1083A0000C30C30CC30C30C3CF3CF300F3CF3CF311
+:1083B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF22
+:1083C0000C30C30CC30C30C3CF3CF300F3CF3CF3F1
+:1083D0000010CF3CCDCDCDCDFFFFFFF731EFFFFF3C
+:1083E0000C30C30CC30C30C3CF3CF300F3CF3CF3D1
+:1083F0000020CF3CCDCDCDCDFFFFFFF5302FFFFFCF
+:108400000C30C30CC30C30C3CF3CF300F3CF3CF3B0
+:108410000040CF3CCDCDCDCDFFFFFFF3318FFFFF2F
+:108420000C30C30CC30C30C3CF3CF300F3CF3CF390
+:108430000000CF3CCDCDCDCDFFFFFFF1310FFFFFD1
+:108440000C30C30CC30C30C3CF3CF300F3CF3CF370
+:108450000001CF3CCDCDCDCDFFFFFFF6305FFFFF5C
+:108460000C30C30CC30C30C3CF3CF300F3CF3CF350
+:108470000002CF3CCDCDCDCDFFFFF4061CBFFFFFEA
+:108480000C30C305C30C30C3CF300014F3CF3CF322
+:108490000004CF3CCDCDCDCDFFFFFFF2304FFFFF2D
+:1084A0000C30C30CC30C30C3CF3CF300F3CF3CF310
+:1084B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF21
+:1084C0000C30C30CC30C30C3CF3CF300F3CF3CF3F0
+:1084D0000010CF3CCDCDCDCDFFFFFFF730EFFFFF3C
+:1084E0000C30C30CC30C30C3CF3CF300F3CF3CF3D0
+:1084F0000020CF3CCDCDCDCDFFFFFFF5304FFFFFAE
+:108500000C30C30CC30C30C3CF3CF300F3CF3CF3AF
+:108510000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE3
+:108520000C30C30CC30C30C3CF3CF3CCF3CF3CF3C3
+:108530000000CF3CCDCDCDCDFFFFFFFF30CFFFFF03
+:108540000C30C30CC30C30C3CF3CF3CCF3CF3CF3A3
+:108550000001CF3CCDCDCDCDFFFFFFFF30CFFFFFE2
+:108560000C30C30CC30C30C3CF3CF3CCF3CF3CF383
+:108570000002CF3CCDCDCDCDFFFFFFFF30CFFFFFC1
+:108580000C30C30CC30C30C3CF3CF3CCF3CF3CF363
+:108590000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9F
+:1085A0000C30C30CC30C30C3CF3CF3CCF3CF3CF343
+:1085B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF7B
+:1085C0000C30C30CC30C30C3CF3CF3CCF3CF3CF323
+:1085D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF53
+:1085E0000C30C30CC30C30C3CF3CF3CCF3CF3CF303
+:1085F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF23
+:108600000C30C30CC30C30C3CF3CF3CCF3CF3CF3E2
+:108610000040CF3CCDCDCDCDFFFFFFF3320FFFFFAC
+:108620000C30C30CC30C30C3CF3CF300F3CF3CF38E
+:108630000000CF3CCDCDCDCDFFFFFFF1310FFFFFCF
+:108640000C30C30CC30C30C3CF3CF300F3CF3CF36E
+:108650000001CF3CCDCDCDCDFFFFFFF6305FFFFF5A
+:108660000C30C30CC30C30C3CF3CF300F3CF3CF34E
+:108670000002CF3CCDCDCDCDFFFFF4061CBFFFFFE8
+:108680000C30C305C30C30C3CF300014F3CF3CF320
+:108690000004CF3CCDCDCDCDFFFFFFF2304FFFFF2B
+:1086A0000C30C30CC30C30C3CF3CF300F3CF3CF30E
+:1086B0000008CF3CCDCDCDCDFFFFFF8A042FFFFFBB
+:1086C0000C30C30CC30C30C3CF3CC000F3CF3CF321
+:1086D0000010CF3CCDCDCDCDFFFFFF9705CFFFFFE5
+:1086E0000C30C30CC30C30C3CF3CC000F3CF3CF301
+:1086F0000020CF3CCDCDCDCDFFFFFFF5310FFFFFEB
+:108700000C30C30CC30C30C3CF3CF300F3CF3CF3AD
+:108710000040CF3CCDCDCDCDFFFFFFF3320FFFFFAB
+:108720000C30C30CC30C30C3CF3CF300F3CF3CF38D
+:108730000000CF3CCDCDCDCDFFFFFFF1302FFFFFAF
+:108740000C30C30CC30C30C3CF3CF300F3CF3CF36D
+:108750000001CF3CCDCDCDCDFFFFFFF6305FFFFF59
+:108760000C30C30CC30C30C3CF3CF300F3CF3CF34D
+:108770000002CF3CCDCDCDCDFFFFFF061CBFFFFFDC
+:108780000C30C30CC30C30C3CF3CC014F3CF3CF34C
+:108790000004CF3CCDCDCDCDFFFFFFF2304FFFFF2A
+:1087A0000C30C30CC30C30C3CF3CF300F3CF3CF30D
+:1087B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF1E
+:1087C0000C30C30CC30C30C3CF3CF300F3CF3CF3ED
+:1087D0000010CF3CCDCDCDCDFFFFFFF731CFFFFF58
+:1087E0000C30C30CC30C30C3CF3CF300F3CF3CF3CD
+:1087F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF21
+:108800000C30C30CC30C30C3CF3CF3CCF3CF3CF3E0
+:108810000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE0
+:108820000C30C30CC30C30C3CF3CF3CCF3CF3CF3C0
+:108830000000CF3CCDCDCDCDFFFFFFFF30CFFFFF00
+:108840000C30C30CC30C30C3CF3CF3CCF3CF3CF3A0
+:108850000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
+:108860000C30C30CC30C30C3CF3CF3CCF3CF3CF380
+:108870000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBE
+:108880000C30C30CC30C30C3CF3CF3CCF3CF3CF360
+:108890000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9C
+:1088A0000C30C30CC30C30C3CF3CF3CCF3CF3CF340
+:1088B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF78
+:1088C0000C30C30CC30C30C3CF3CF3CCF3CF3CF320
+:1088D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF50
+:1088E0000C30C30CC30C30C3CF3CF3CCF3CF3CF300
+:1088F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF20
+:108900000C30C30CC30C30C3CF3CF3CCF3CF3CF3DF
+:108910000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
+:108920000C30C30CC30C30C3CF3CF3CCF3CF3CF3BF
+:108930000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFF
+:108940000C30C30CC30C30C3CF3CF3CCF3CF3CF39F
+:108950000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
+:108960000C30C30CC30C30C3CF3CF3CCF3CF3CF37F
+:108970000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBD
+:108980000C30C30CC30C30C3CF3CF3CCF3CF3CF35F
+:108990000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9B
+:1089A0000C30C30CC30C30C3CF3CF3CCF3CF3CF33F
+:1089B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF77
+:1089C0000C30C30CC30C30C3CF3CF3CCF3CF3CF31F
+:1089D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4F
+:1089E0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FF
+:1089F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1F
+:108A00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DE
+:108A10000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
+:108A20000C30C30CC30C30C3CF3CF3CCF3CF3CF3BE
+:108A30000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFE
+:108A40000C30C30CC30C30C3CF3CF3CCF3CF3CF39E
+:108A50000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDD
+:108A60000C30C30CC30C30C3CF3CF3CCF3CF3CF37E
+:108A70000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBC
+:108A80000C30C30CC30C30C3CF3CF3CCF3CF3CF35E
+:108A90000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9A
+:108AA0000C30C30CC30C30C3CF3CF3CCF3CF3CF33E
+:108AB0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF76
+:108AC0000C30C30CC30C30C3CF3CF3CCF3CF3CF31E
+:108AD0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4E
+:108AE0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FE
+:108AF0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1E
+:108B00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DD
+:108B10000040CF3CCDCDCDCD000C0000000700C003
+:108B200000028130000B8158000202100001023067
+:108B3000000F024000010330000C0000000800C0DC
+:108B400000028140000B8168000202200001024007
+:108B500000070250000202C00010000000080100DF
+:108B600000028180000B81A8000202600001828067
+:108B7000000E829800080380001000000001010030
+:108B80000002811000090138000201C8000101E85B
+:108B9000000E01F8000002D8CCCCCCCCCCCCCCCC94
+:108BA000CCCCCCCCCCCCCCCC00002000CCCCCCCC15
+:108BB000CCCCCCCCCCCCCCCCCCCCCCCC0000200005
+:108BC000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCE5
+:108BD00004002000CCCCCCCCCCCCCCCCCCCCCCCCE1
+:108BE000CCCCCCCC4100200003030303034202029F
+:108BF0005050502070608050131313131342121200
+:108C000050505020706080500301020000000000AE
+:108C100000000000000000001F8B080000000000A2
+:108C2000000BFB51CFC0F0038A0F093230688A2055
+:108C3000F8C4E05C760686751C0C0C5BB849D3075B
+:108C4000C32C0C0C0CDA4CE4E905E1FBBC0C0CAFBA
+:108C50008098850F559C871342FF015AC0C7CAC030
+:108C6000A0C1865DFF3A35043B408581A11C88D9AF
+:108C7000941818CC5411E2D2EA0C0C3380FC04A8EE
+:108C8000D81D201DAB46BE9B47F1E0C1378D51F981
+:108C90005B0DA169012A7E0B4D7E1B54BE4A074223
+:108CA000DF36C66E6EB50E71F69FB546E5AFB4C63B
+:108CB000AFFEAE3D2AFF209AFAAD503E00C5D55B0F
+:108CC000A7D8030000000000000000000000000022
+:108CD0001F8B080000000000000BED7D7F7C14D589
+:108CE000B5F8999DD9D9D9CDEE6608096C20E02454
+:108CF000861AFB82DFE577A841878034B63CDF8A9D
+:108D00005AD3D6F6BB506C551456BF3EE1F56933C5
+:108D1000F941122262049FDAD61F2B554BFB6C8956
+:108D2000942AAD3FDE024AF1F5C743AAD5D7A22F58
+:108D3000FE80AA455FC4D2D87E51DE3DE7DEC9CEB3
+:108D40004C76930DD01F7FBCF081E1CEDC1FE79EF7
+:108D500073EE39E79E73EE8DEA0BC2C7CE05388EEF
+:108D60003FECD913028059D9A771F5BCAEBE99006A
+:108D70004721D2D35D0AD0A68009AC6C1D88A41F00
+:108D800094007F6A14565E2D7F3CDE5D097067D1CA
+:108D9000D7EEC3FA6B2C0502ECD9DD0C9039837D3C
+:108DA0000F453743314011A4B6E277F6937890F53A
+:108DB00037109C9C866876FC32F0D1B80015FAA179
+:108DC00022AA07C765F6CF81E47C18072083FDB38C
+:108DD000067A593FCAF3721AC795E5C5FA8B55D979
+:108DE0007EBC4F595721A389FEF01FF9B2E26438C7
+:108DF0007FFD35072AB73E5D93AD7F06444A0FFDE0
+:108E00001DFB8F020AC123AF07C4C3D130A4E5CA3A
+:108E1000FCFD0C341B5B9FF6231EBF509C989ABF31
+:108E20009E8DA7AE668D9E1DCD3A6402000C64B384
+:108E3000B7963DC3606EAE1DDA6E0148842FCDB08B
+:108E4000089EF6B02F5D5489502701187EFD881FBB
+:108E500009DF2FD1CC1CEDED279432FCD8F36578D7
+:108E60000C02EF0FD8FC1E64FD0571FC1CF8BA085B
+:108E7000C72F63DFAB878E6FCD3CF1F1436702EC08
+:108E80000B23BE4D84017C7A0AE282DE9F9486E940
+:108E900047D05931783F23E1BDA8C6971D97FD0DF6
+:108EA0001A21179F0462256EBEF1F225E2A90CE992
+:108EB0006548AF4FC9F6AB22DD72E0EB4A81AFFEE9
+:108EC000F989A604C3C7DA66B05E73B4936360A67B
+:108ED00073E069B568678FA794B27A39FA076811A9
+:108EE000EBC772D52F14BE9B4E10BE9BFF42F0DD28
+:108EF00026F89D49287AF6CF4F129CDEFE72AD2FE0
+:108F0000B68807CB21256DF990BF4B21FE207BF859
+:108F100035BECEECEFDF073FF5B303250E1BA74DA3
+:108F2000C0D73F9FCBBFB5D3D4F46689E4910BCEB5
+:108F300087517EB1769224F0A1F502F25FD1070A43
+:108F4000C05884CF844404605D7583369CFC015D09
+:108F5000F9539FCD775543F9EEE36C18842B14CE6B
+:108F60008DA7EF0FCAD1CBACD7583F5A90BD3F1D4C
+:108F7000FB2D8D55CC069C1DFDF8C577907CF271BC
+:108F80005CB7C758BDD942CECAD43FC911A8009218
+:108F9000F7B2A84FE3B0FA01362D733A7BE2FB1A21
+:108FA000318E34B45F6FBB0128E1F811F0D8725DE7
+:108FB0008627A89F41789404E1CBFBDECFDEEBE16E
+:108FC000937F7FB265BF9167BC1E89F869A4F6AF35
+:108FD000087E19C29F79E8BA5FAC33057A4D383DF7
+:108FE000CB47367F9D281F9D349FB0E1495FE4E168
+:108FF000130B52B46E5835AB7BDAE8F925079F6442
+:109000009CF5174B63F83C9438F10B834721BED590
+:10901000393C65D34BA93F09D7F819D88328231EBB
+:10902000D87C97D9ED214EEB3584768EA33D9B1CE1
+:10903000C12BC99290FBBCDE0D629DCF6BA8E0F006
+:1090400083E8DF032FEB4F73F627438587CF39DCA7
+:109050001B242EDF58FD0CE1D33BBE2211BC322471
+:109060002C1F6BB7598CEF955FF673BBE86FBD048F
+:109070004DBD61BE9E9638F4618324E484C6D799C1
+:10908000573EF991AF669C385F152AD7174BB9F553
+:109090000EB38A621746F2EB9D629FAD0F323141EB
+:1090A000B751D1FD74A9C445F742E15D7682F04E17
+:1090B0001C0A6F417C76A6E41B959EBCE104E10B83
+:1090C0007AE03B557C3D43F059A1F0DBEB60B4F016
+:1090D000CB43F15BD03A9A3B4AF8369F207ECB7C5B
+:1090E000B69D24E0CBB36EE7097A5BC0F9436176A5
+:1090F00038EE730A85EFD191E103F804FB6BBD6A8A
+:10910000990AD96B0013009E6E79D5B2942C7C26F7
+:1091100070B93EDAF1F78C4C3F31FE5B96599D1DDC
+:10912000FFF996B75CE32B8C7F90D90A1DF7854237
+:10913000E70DEFB9E6FDBAF49E6BDC13C5FBC18207
+:10914000C7FFA36BDEEF4B7F74CF3BCCE67D7AE1AC
+:10915000E3FEFE04F9B152AC97064977E9817CF64B
+:10916000FB0C41D7BBEDFA36BC79EA9F29E06A2FA8
+:10917000B0FE44D1FFE70AACDF2BFAEFC5FA652356
+:10918000D73F5DD44F15585FF2F175984F7FCE975A
+:109190006CFC816BFFD1A6713F88D9A640F09CA1E1
+:1091A0007E13AB21F5ED3E467BAB35A0B79592DF44
+:1091B00084FC226B0012E837F92624EB7CAC1F6399
+:1091C000C74DF761BD238AA677EBC01724FB1E3C71
+:1091D00010D9DC5D991D6FB59C6C929097DAA2FA5C
+:1091E00083E45F493549EC59668575F4DB0C5425F9
+:1091F0005A9696E23C0CDD62FDFCFA8A8B76627927
+:109200009326E9322BFFCB39736FFB0C6B35F0E102
+:10921000CE974EC37AD3C655B592BC3425C44F6998
+:109220005C35E5287B5E7C71561FE03F8B1D6566D3
+:10923000077CB6E9122EFFC5F7CF27DDE54B1A2FC5
+:1092400071B5BF34E1FE9E9D0FF07DC7B9DCFF30E4
+:109250005095FA2F0ED7C72A2DEE5FA0F9EA565483
+:10926000EF66F35CFFE1B5545EDF52ABB7B2F2E7F5
+:10927000AEF4B72C65CFB004BACC9652715CA5F9A8
+:10928000029BAF5AC7768FE73CDB35DBC8BFFF2AAE
+:10929000363DF38C5F9C8593CDB3E9EADC70ABFA85
+:1092A000FB13DE60F6D2C0CEA089F084F7CAE9A035
+:1092B0004474DD3909E9621527397D40AA66CF2358
+:1092C0008D3AA07FA4A13169C8ACBC31A6C5030604
+:1092D000DAC9190DF11E411ACC65EFE3BE20DA633D
+:1092E000AAFE07EA5F17DF7BE255E3D13FF2E3E630
+:1092F000351315B6DE77345BF47CB4B98B9EDB9BFB
+:109300007B262ACC88DFD27C173DEDF9A12431ECF5
+:10931000F9C9B8AF365B91DF06FCCC34423CCEF7DE
+:10932000D1FE7603CA113FCAE1745B14DFD7C1B422
+:109330006E40B9C4E5CBC6F8B6DDF87E633D4C435C
+:10934000926D3437B745D93CAE2B87E9D8F7CE9725
+:109350001FE3DF2B607A8095773536905CED89FBD3
+:10936000D2814A82FF7CE4E79E461F3093078AEB56
+:10937000185C0EBC0662EEF2AE4626B066123ED215
+:1093800001293B7F852D33C4C746B32AE8DC57CF7C
+:10939000DAE76E7F66DA5DDE88ED87F14BCDED733F
+:1093A000D79FF392BBCC24DB2B837CC0F1F8AF3E7C
+:1093B000260F76BF3CDE67E1BC4D3E4FF6E4FEC2B1
+:1093C000982F8DC6E716813F1BBF03112E5F3636DF
+:1093D000733F603E78367EEAAAD8707E03B5B1232B
+:1093E00081FE54B5B1270167E1332D9EBD09A79FCA
+:1093F000D57EBE88C68FC35FD211DB58B2B4360BA0
+:109400008FB7FE785925793750C6BF77C45ED3979A
+:10941000D63AFB93BCDFB5CBC3CEEFDCAF32506E98
+:109420007F3FA22D0DE7683F897DCF4197A532FF91
+:10943000FEF4CB81863B901F057E77BFFC13AD1AEF
+:10944000F1FDBC0CC8671BF73590BC453E4379B1B4
+:109450008BF1455F2DD27FFD2BCE755B5CE72E3304
+:10946000BEE2FCC5FAC5A17E86F4601DFEBBF0CB52
+:10947000EE157ED93DCD317A3EDD6CD07357730D3C
+:109480007DCF34C7A9FC54731D959F6836A9FCE3B2
+:10949000E6462AEF684E50F9D1E6267A6E6F4ED234
+:1094A000734BF315F464FC4BFCBCA13925FCC06B79
+:1094B0005CFCF0F7F1808BFF3E5DE32E9F6F9C918B
+:1094C0005DD7ECEF2763EEF279FA275DE5059ABBED
+:1094D0003C1FBEE2EAEFDC0FBEEC2ACFEBEF70D50B
+:1094E0003FFB4D77796EDF439EF5E22ECFDAB7C7AB
+:1094F000B31EDDE5E2BA43AEFE023177F97E1432E7
+:109500005C4E117F74C45A4B72F2CFE0F78DA12FDD
+:10951000B9BECBD47E64FE59D65589FC93F6C52DD1
+:10952000943B26E7275BEE78F9C4A6DB48FC65C3CD
+:10953000F197E6ABFFE5A7E1F9A9607EA85772F2C3
+:109540008397EE5EFE18226704BFFC2F1FFC6DF0B0
+:1095500001CC64C42ECFAF5773D877649F061240F6
+:10956000F69D1FED34477B75722A69E6D09F57F947
+:10957000E66F95593F8152E8C0786840C9E3E795A6
+:10958000F93E25A0F1EFC16A93ECB26230A6CB633D
+:1095900000AE796C5EF932F6FEE7421F765C089603
+:1095A000C4FA1B37414DE23EA6B8DABDDF7B46E682
+:1095B000FB18FBB9E9879126FC0EA5334798378F36
+:1095C000D7C8136737FDC660CF0B666F59CBDE86F1
+:1095D000AA9319F2019596927D9A0C19D4AF5997D6
+:1095E000B67CA518478338DA8972D884241B67AE05
+:1095F000CFFC05CE9BD947FF21CFCADA3D9BC4F3F0
+:1096000047621D5EE4337F29EA3D3F5C3D7BDC1110
+:10961000E905494BE2FEA9F8830C447F69DC653F0C
+:10962000D9F353948499C8616FFC4EE04BD2E34D5B
+:10963000DC0FA202CA877CF50FCAB6FFC972ED071C
+:109640008BA13F23231C311E6F82631719174E1DF8
+:109650000A87AA2492380EC6AB37B371DAC77CC624
+:10966000483AC6F948E67E2A2966123CAACEE1515C
+:1096700095B899C8C14703021EBB1F3B6E26C5FAA9
+:10968000A12F9C856F6D30D184FB256B8C4A786A45
+:109690008FB8EDAF190AEFA75A3CDBFDB9ED438057
+:1096A00056BE1F1E57A761FF6D750D1ADAD78C1DA8
+:1096B00068BFD21E5E523C9CBDBD5ED8BFDD280F88
+:1096C00003180FD785BC8AD1B33DBCAD11D7C1D12A
+:1096D0005A8687CAFCFD44E2EEB86E514DC813C7E6
+:1096E0004D139C41A3C413EF9DE06AE71FA7F8EC5C
+:1096F000B8364823C3DF21E0B7EB752A294DCF895F
+:10970000273EBE5D0EC4DCF0FEF9F0C7DB17F97B27
+:10971000F55C709D2ABCE58BC3DA4F75AC9A4A7331
+:109720007F4ACCB90E3E2BF84B1DABA5483E69F9DC
+:10973000BE8778FB7082FC5B5A38614055361EABA1
+:10974000E17A70E0E95AD1EED78A4FACCB540CFDE8
+:109750005C92916A427ED22AD83A9286B6B39F49E9
+:10976000D1BEF3C3FFF712AD93328DD68964B075C5
+:1097700094631C4931AF56D8F31DD9BC46C1F8CC0F
+:10978000477232D77A5921E0D116270CAD8A427838
+:109790003CDFC303C73A85EB834336FC568AFC564D
+:1097A00085C2BFA640F8ED7118FCED02FEB5C3C13D
+:1097B000DF26E02901A3857C990697B300171ACE0E
+:1097C000BC8B37C4F825424E314C11DDECEFFF2540
+:1097D000FA29743E1B059C23CDE78D2C3DEEC579FF
+:1097E000B0F9DC87F3CA379F7B041C6F285CCF6815
+:1097F000898411AB22559F93AF9E1070F42B228E5B
+:10980000665D3B2ABEFAD702E7F144962E8F09BA6D
+:10981000EC186E1E8F8A79F4C830F70DF4339E2E43
+:10982000F40E2C71D1E5A8C04F4FC0A6CB752EBA4F
+:10983000FC4ECCABD0F93C53209F1DCDD2E5393145
+:109840009FFDC3CDC751FF4551FF25519FFCE74701
+:10985000952B5AAD5AFC9E38A0CCCA8EC7EABDECF7
+:10986000AC776DFB2CBBDEABC80F5223D783ACDECD
+:109870006BCE7A605DD08AF6DB5A8C897E02E081FD
+:10988000F6AF3688766F52BBC583FDBF25D607B5C8
+:109890005BD73EBFD50A53BD77F07DCB828FEC7A84
+:1098A000EFBAE15D61C37184E04D0CC2F1BEB3DE7D
+:1098B00013CAE7A9BF217947B19282EC1F7F699251
+:1098C000F2F74A20D283FEC50E2545FE640C36A071
+:1098D0001F7275204EA92A23F9A3CB2EE6ED7445FD
+:1098E000237F6A005270177BBFA154A1F8C862257C
+:1098F00019F1A31D21252D0AAE827E590BF63FD604
+:10990000A0FC2F1B9EDB8ABED845FD3078B0DF3B24
+:109910008BA23B91AF364E520DE4AB9D936E20BFB0
+:10992000F96D2D3C7FF0B6F355DA676D7A3942FA5E
+:1099300077AD12FF2CD6B74CD5403FFAEAD0472F6F
+:109940002D67E5BE96625D3A87E641705B3E48B49E
+:10995000CD74E42332B80371CAA7233FDC6D8D3C7C
+:10996000AEC37ECAB1FDEA0546BCDB40F1C5E418D2
+:10997000FBDE59A792FD7A5B45D57C1C6F539D4653
+:10998000F6C6A6C5552DE4C7AB0B91BFB2246C48F3
+:10999000E8678FCE519901CECAA5460BDA9B91D9C3
+:1099A0002140BF5349051F2F7206901FCA0F3D89E2
+:1099B0006AF68C76A990198BFD2DC97C09ED99BAB0
+:1099C00000F9E1D9C4F6D78EA39437FE23FF0C101B
+:1099D0001EFF441910EF367DA33D83ED87CD638CC8
+:1099E000A60BAC9729AC5EA44B81CC8C02EAF51493
+:1099F000582F5D60BD0CAF17800B87CDE78338CF44
+:109A000023D4D81F9EC7E8C82BACE4F6BBD36EF1B5
+:109A10007BBE8F362FF42ABFC80B9D0373785EE898
+:109A2000F0EDED7CD091E60BE0CBC2298F5C7F6D31
+:109A3000F3F07E63FFB81B62987FD959F655F1BCED
+:109A4000913FCBC5FBF2353194779DE5E27BF98DF3
+:109A50004DB9F6AF77FAB91CAE81C4B0742811F0D5
+:109A60001F62B0637E4F8DC2EA47F2D7574B7DC36A
+:109A7000E6596A8AD540EB76B18FD66D008501AE86
+:109A80009B0ABE8EFD904A54F37855B4DCB17EFC3F
+:109A9000F57B68FDFCA25C06A98EE813473C7AF9C9
+:109AA000C4CB170170942B4F9E4FB6FE99F8C4DFBC
+:109AB0002517B47EFC3D05D64B17582F53583DB59E
+:109AC0004B2A48AEA83D05D64B17582FC3EBAD9D8A
+:109AD000AB727D0E7F68C578BFFF139AABBCF613DF
+:109AE00021F7F7B3C3AE72C72C777B75B6BB7DC7C2
+:109AF0006C777B750E6F1FEC800518CF2F749D1C43
+:109B00003CC17552A30D5F3F5237C2BAD2F420B6A2
+:109B10002F510CC89492BE4A0BBD95331E7E9ACA33
+:109B2000D77F959FC7CF6F53F420EE23FFD6E72949
+:109B3000A93C9FC09EEF48F0DAF2F7B7B2B0B7F297
+:109B4000E47D438C9F7FF043288E768EB1506B78F6
+:109B500085E1D1FF2CCF7BF7F6FB8A9A9CA63AF6DB
+:109B6000C5CC3E83A4C30F737E99C2F36D181DD07C
+:109B70001E5221D158C9FA6BABF0913DA28447D057
+:109B80001B150EB995232F2FEB970213CF53D02718
+:109B90000360FE9B7CDC501C08EE08F4D166BA180A
+:109BA00053E54E07180386C493BEE212CF13ACD719
+:109BB000519E95064F75BF9751BF92791B1C2F1A66
+:109BC00045BF4A1FE5CB9CF27E478037087753BFDD
+:109BD0006C97547A7C6CB65F7F2C452F314F56764C
+:109BE000E4CBE1B908CA37F1C53394DF30214AFB31
+:109BF000B2B5A5D7B9F2C1FF59AD72F98754BDE32B
+:109C00005A09E3BA15579B7DC3F079331357E4F72C
+:109C1000AC586EF6D5E4AF3798A78FF99E39D64188
+:109C2000879A4CA3FD6E4D0EF3FDBC92227F63A775
+:109C300054321DF32DEC7A4A0593B40CAEC84CD3C4
+:109C4000C2FD5EE7585F1CED5405D6EF93CE62ED82
+:109C5000E4C571A7FFD2FB542A94B79DF3B95D65A3
+:109C60007A12E1147AB26D047E1FD1EE51E3C95C21
+:109C70007ED16FAB7C5FEB0FE5FEDE176A78409D0F
+:109C800035146F8F217E717F3B06BAA4FFC3D9873D
+:109C9000F2A52AF6BC8478585BB62836DC7CD90657
+:109CA000EAF0205D18897F16321F4179300C1C3F85
+:109CB000CC0507840BF37FEB0BE3C48783F65229B3
+:109CC00088FD98199518DF870457DE32737306CF25
+:109CD00043F897864DA49F6C6E01F457DB76936C26
+:109CE000865EF5113DEBB9FD54C3ED2193FDC179BD
+:109CF00044EB87B7AB654FF939D56D0FB535EF003C
+:109D0000679E9BF75C85FD4C871A5ECC8D8FC2F6F3
+:109D1000C3B7337EC13CFB8DCD1A22057A9A752AD2
+:109D20006F688E51797DB341CFF6E61A7ADE8C4D9D
+:109D3000E7E2F9A7545725C35B57EC81D8E5ACCAD5
+:109D4000ED283B288FEFDE05682F770F96D93690E8
+:109D5000C1DD3D09785E9F7AEB02DCE7770741F8C9
+:109D600015DA16A05D9D2DDFD1361FCBC2CF10EACC
+:109D7000BC6F01EEF76F17F90FA098DA250EBD77CB
+:109D80005AC04FFC477B576A6FB5617F414594E1EC
+:109D90009105EE3298084F50E3E505816DD43F8977
+:109DA0000036DEA7033FE0E34D11F96DB54B46C029
+:109DB00023F7EF5BAAC1FD5DB525143F52E3717433
+:109DC000BFC2ED6304DC05F6034A92EB3B718E2FB4
+:109DD000FFBA1941AF093846A23F4307F9D1EDF365
+:109DE00069CA0BB9F5F4A91EF776FFE8F0A2D6F51B
+:109DF0005B7886ED09353927C0DA47CCDE4C252B58
+:109E00004717672C5ABE058E3B3660E7392669FD39
+:109E1000DB7856746E77ACF0D0D15FCAE3754171D0
+:109E2000FEA4507893AA1847F4030F37940F67AF36
+:109E300095257C68840DCA8BB18D21E19CE1E531CB
+:109E40006689AB5C5C37C1553F12AF727DF7EB1F83
+:109E5000777D3F513A5DE299C7A784DD6897CFF5DA
+:109E6000CEB3C07E0F1627560570DD34404D8AE113
+:109E7000F5CE2F3C44F80F0DAED385ED6605E58396
+:109E80008B753D8F9775FB7B5DBB59CFCA86FD7D7A
+:109E9000062F9BF6F738AF6FD9DFA7F2EF28F759F7
+:109EA000F96B9D67B45BF81D5AC96F0B152958E211
+:109EB000A0CFD8F10DAD08DFF8CBD2318BBDEFFECE
+:109EC00050E6F2007A62CE7A776ADC0FFDCC943BE2
+:109ED00062E8AF5C77E64331207927E58C07FE3CEA
+:109EE000C0F3C5CA42899E00AD77B3BF98F1E1A126
+:109EF000876483EB21E535D4873E8BE7E3AB10DF46
+:109F000067A25D54C3FDD521F19DE85899AD3F4846
+:109F1000574FF9EF34AED77F87491B0CCEEF159B17
+:109F2000F7D0B890961AD97AAFB0A01FCF1F81B0E2
+:109F3000FB26F2A6509A48939F6F12C3A7CCBE4F40
+:109F4000BEB8BFC5CF706D5CA6FB7089542D8FFB6A
+:109F500048C00DDA9163A5E3ECF93DA417CAE39B71
+:109F60005280FA7BED990F35215E02997F0283E1E1
+:109F7000ED1F27A5C040FF6F80C315B8AC07483E52
+:109F800057F7109EBDF85A3788F7B40BEF3F0970AA
+:109F90007F7E2CC9DB0DD65358BDA943EB75077BDB
+:109FA000E6AB68BF4DE178F48EF35E4012E776DDF4
+:109FB00070D8FD7AEBDF1210716D2D4DF18D67CEEB
+:109FC000BC21867EEDCE298CFEB5F9E97F4B80E77A
+:109FD0005B19C76E22B9DB3D6923C533D7556F26A0
+:109FE0007BF228B323F0FC747765EEF69DCD3C3F01
+:109FF000E65CB8BBB18AD1A7F37999FCB4DE7ADF0D
+:10A000000954B9E28D5A857B3FC8F8AF0FE5E8489F
+:10A01000FC27471EE0EB72947C8766213FCF50D629
+:10A020008EF6805F94EF0E1C6F13FA9FE47FF9F2B7
+:10A030001E70E64BBE2FF82213E0722658C1F9A31A
+:10A04000DB6F494EFAC5D8FBF98E76F9E8968F1F7B
+:10A050001E17EBE17D25DE44CA5F49E9B9E4B3127E
+:10A06000FBF42F173ACE7BB52B694D47F86B364A78
+:10A070004EBBF61B6632A439F627A1D805BF5C8813
+:10A08000FB1F259E739FFE29D38C6A6CFC9B9B61F2
+:10A0900046359E4B50AC00D6BB59C934D2BEA2DA6D
+:10A0A00047FEF27515D7EDC53C2BABD617C76A6DC9
+:10A0B00015BB1AAB0CE4976D9467FAA6BE2486FD17
+:10A0C0000462EA8CEAB194DF9DC079876B59BF0EB8
+:10A0D0007ADBE3DE2DF8F65BBA3959E3F2E034EDD2
+:10A0E0002F200FDE87788C1B590CCF39F65743F1A0
+:10A0F000CCF3043A2B86E0798EE6E0EB00E27906B9
+:10A10000C9FB9CFE0B86E7B35D780686E7A9593C40
+:10A110007757703C77D66CEEAA72E2B966D7DE4A02
+:10A1200003C7E7787E48E3E773438867079C5E3C94
+:10A1300087255BFF7CAC1DF9D6CBF70CEF7F8FF04A
+:10A14000D8EF3F0AFC82ECE1B1E313176AE43F4920
+:10A15000D1FEE94E29AF5EBA442B402F758A757443
+:10A16000A7C03FEBFF0BD47FA9E8DFD6B7421FFEA5
+:10A1700083F66F0B501FB27ACBA89E9EA27DF06033
+:10A180003D0B86D5A3ACDD95C447614FFF268C4AB5
+:10A190001FB37EAEA37E34CFF8069C949E67FDDE8F
+:10A1A00044FD2A9E7E4FB13DC1C6E926FC81070FC2
+:10A1B0007F663B2696F4F083D2E3927B363F942F62
+:10A1C00077D7CBAFD77AB85E1B6AD710DFFEBC73E8
+:10A1D000CF6EDC27BDA99BDF46BC8E761DD876608E
+:10A1E0005928B94DE376209D83B0BE51946E636DBE
+:10A1F00095E33D511E7F77EBA3F1B63D54CDF5407D
+:10A2000070947A699FB0D73AC6301955CC9EFE44F7
+:10A21000532E3FC3339A9DB7E6B69B7F8373243F8B
+:10A220005182FC6BEDB1CFECE863B4331B7B20971C
+:10A230009C4F86923FC7F9A9BA65927A15FE917C28
+:10A24000FD9626AC9D7B6792DCEDC7BC461072186C
+:10A250004D6BF4C74519DE0E69E4C288A37FADECEF
+:10A26000626B3ECAB10AC62F587F5CD33E29992B38
+:10A270003E6EEF7F10881CFB97719F9B9DA47CB85E
+:10A28000C53347D8DFB4D8F6EB6F715E87D49E0B29
+:10A29000A638F06ED3E90E2971E179284FE7713ABB
+:10A2A000158F924E03824EB098E7A19E7BEC5C8D99
+:10A2B000FC8B115F02FDF0417F8F5EE2E0A3713EF7
+:10A2C00048F68E02FE7AE8DF7D1CF77F611FED778E
+:10A2D000BBC3CBBE83F7EF58BA1A9F6264C7ED6663
+:10A2E000FABEC4A17FBCFEAAC17DF4E2C2F265A79A
+:10A2F000587328DE9FBD3FC89D7FC018AB06F3860C
+:10A3000056CBDC7F7E67D1D7280F618D15D003A592
+:10A31000A4C7C8FE5B27F2D93A453EDB5A91CFE687
+:10A32000B7566FC5FA9B0012E8976C9997A2787F91
+:10A3300054D1F4D638C2919A837A225A6AAFCF1F89
+:10A340002FC4F53958B6BED1DEC0E61B8DD9E58DD8
+:10A3500064BFB5B77079F3D9E00B0BAD7A64C53E35
+:10A36000A2C7A6BA25C5308C3F325CEBCE9F0B55F9
+:10A37000875C65ADA2C455564B270C1BB7F819FA7C
+:10A380008966E17CFA208E70E6C9179E12E476B6E3
+:10A390002C4FEBCF60BEC1D96A7CB381E7A8DD79D1
+:10A3A0009CED416E0F3E8A0E218AE30ABEA8E3713E
+:10A3B000D5A2B955BD180782319C2F304FD0C90F97
+:10A3C000F9F8E2AF8D1F5FD1E118E65DDCD21A0526
+:10A3D000CC73B965EEAFE21903E56A5F0CF333DACB
+:10A3E00098246965DF37CCFD9591CB9F7C404B2E3F
+:10A3F0000F22FEC209B2BF223393F4FC6BCF6B2451
+:10A400007ADE19E47A6E8AA0A782F49C99A5E7BA4D
+:10A410003A46CF99D975BE4EE9D10AA1E7F9387EFF
+:10A4200019CAA1FFA67DDBCD75BE46944306F45242
+:10A43000FEED865A9F0FFBFF6BE1C5862B3C97C94B
+:10A4400047A25326817A61435CF1A11CF99BE3C3C7
+:10A450008FFAE87D017CF8C35C7CB85CD0432EDACF
+:10A46000D7942BEF6E4A5072E1653DD28BE3A591F4
+:10A47000E3C5F757C1CBA0BED0922B916FAE88A990
+:10A48000B4EF564ABA3A285EC4F41EC61B56C8A694
+:10A4900081F126F8969FDFC7847ADBA15FFE180C56
+:10A4A00072FB445EBF88E2186C6AB82F63E58F0DBB
+:10A4B0001B0F4DFBFB9DF79478F3325E0BBAE31054
+:10A4C000472A961423BDF2F5F776F35E1DCFD5DA51
+:10A4D000F919DEEF2B6448E53AB72885346167F651
+:10A4E000AA84871B99AE9D86F8F8D8423C9FD9591B
+:10A4F000D13A8EEC1871AE61C5966775C501E70A51
+:10A5000085A9BFE943E763E37705AAC91247FBF4CE
+:10A510005E577B6FBBC1FE447B66B7F9430C3E536D
+:10A5200049EDC578B37D7E43DD323F436A330FDCAE
+:10A530008C8E270577A1E7388E3CD0D681FB6DB491
+:10A54000BF3EC1F8E4B78FC8F156F6F58ABBCF58C5
+:10A5500088E75A0F01E7179B3E6F3DD0362E175FF5
+:10A56000E4A3CF79A12087E714F3D759210F7FF512
+:10A570005E549C8153CF5F8BF3F197C0CFE15E8E29
+:10A580000FB86B6C4E3AE59BCF209DEC7682CFBC2A
+:10A59000EDF3B5637C95E07C95899E5D085F097855
+:10A5A0006DFA9D2CBC23F155608D6CE079AE4A2587
+:10A5B0004172B3B3F43A4BDCEB48F99E72CFB48CE2
+:10A5C000B8D74AE4B54306ED8940A949767448DC1A
+:10A5D000CFA355BBE5A612739F9B8835253276BF66
+:10A5E000E8BF0CAC5169DCC1F8711832C12896790A
+:10A5F0009C14C51FEE2B02F04DF27BB27639FD9E06
+:10A60000F65311F96A98CB4BF7B2C1E747C86F719F
+:10A610008F13BB78F8FC1A6F7D082BC62107DEF379
+:10A62000B753E090639FB341DC2B6AE3DFDCB29465
+:10A63000F2CA83E08BD3FE20D661E1BEAF43ACE724
+:10A640004E7CCEC573BCD375DAAF55F0788B257DC3
+:10A6500099FC0CF6B9337B3CFBBC995D6F24FAAFD7
+:10A66000C6F594637DEF0A717D3AF0B5D47FE33E81
+:10A67000C4FA1318780FC5E3CD1F509CFA9CCC5B2D
+:10A6800032FAF79F098DA37ECEE9EF931738D6E50E
+:10A6900039E21C0740AF9CEB9C97DF0AEC427E78C6
+:10A6A000EA30DF8F3D75F808D9E14FFDDE9746BEF1
+:10A6B0007BEA83E1F31E1E17FB22BBDEE3BFE7F656
+:10A6C000D9E34A6F512EFB2E3B7E9AEF070FBBF961
+:10A6D00015945E19F965E0A67D32FA071E6FD6A4BF
+:10A6E000D799FC9927E679CEE13E19F74D23CD6B3A
+:10A6F000AB87BEF63CB7D6737B746BFD9110FAFF47
+:10A70000B73EC1E77BB49E9F8FCD07EFAE669EDF5D
+:10A71000B1F589DCF86898C7F7C70D7EA334A75D4B
+:10A72000EB3967B54093DDE7BB4E317CBBEBB9DD60
+:10A73000B55B89874F049EBCEBBBAEA711DD08510A
+:10A740004836CE9708BDFB5D7E92035F6FF932E617
+:10A750006B2C0D9B12EE65A12FF3249B5789A92525
+:10A76000F0DE98E2FA1E6932E677C4781EF937AF58
+:10A770007E2DF3322BDFDC5444655D379E5B84F81D
+:10A7800028D5C99F72337A5C48407F732DE627D065
+:10A790007A64E5C0CD3DE7A13F4B012E2F98C56BF4
+:10A7A00028E3E85E3F72D2E4931BEC473A1EC8B63A
+:10A7B000CB3B4F4FDE6D00960C2FC796F3FA16FB7E
+:10A7C0008372A8C49367A22F74E7A5443DFD4F454B
+:10A7D0005BB5AC80BCF2931C670C6CD30CDC67D708
+:10A7E000FAF434D607630CE60D861B9981C4E83968
+:10A7F000460709CDE591F0BE0EA091FBBF33E03CCA
+:10A80000A7D350C4E5D584AB6E97709F7134CEB892
+:10A81000621A96DFCC997FD52EE4C76059DF45F2E6
+:10A82000B4037AF7525C20E9233BFCE6DAD631CE5A
+:10A83000F64B8B24DB1F28E80F86323B4B7F363FDD
+:10A840003378D65F8EFEB1E56EBC8F962ED714712D
+:10A85000793512FD4F761C9B6E43D7478BA0DB03E7
+:10A860001417EDAE195EEE0FA5DB36D277E1DADC18
+:10A87000F9BAD715492E796C3F3548419CF1892C9E
+:10A88000EE6796C7CF6EBA7F18F9233BEF67866CE9
+:10A890003FE38C1E13E356E3A1C7C473DF8CA7E329
+:10A8A0001940FE3601ED24661E111FC99EFDDC46CF
+:10A8B000C14741789EDAB35560E9A45752A03BF2F4
+:10A8C00054CE93C371F45FACD3C3742F12CA4F9E9E
+:10A8D000BFC3F3FC8B39480CBFFD80F22D542E838F
+:10A8E000857EBF7A01AFC4F80EF3FB0FBC7500F78D
+:10A8F0002BE1996E3A29078A28AF2DE43D2772E0B3
+:10A900009A6B687FE3A1E368F3FEBF5F24ECFF224C
+:10A910000893DD24DAE7CBDFB3ED7E1BBFC6B108B9
+:10A92000E5ED741C90081F659313F7E3FE0C7E257C
+:10A9300003CFCB0413F3F656FF74167D1F1A574846
+:10A9400054225DDE3A50A4B75616922F9948B6B0FD
+:10A95000FAC68140BCD520D5E2D3908E7D12D1516C
+:10A960001AA751BED6EA7FF7DF1F18265FCB8E3FAE
+:10A970000E96158BE29B5DC674CD294FCA42C95F06
+:10A980001639E3F622AEEBF5AF07C3EDB16760F41D
+:10A99000F18FD2F120E2F29F5F84F64B17AE019E59
+:10A9A0001747797A5DE5BCFC46D1944518DFE98A02
+:10A9B000F07271F8C8792D246713E4FF5BC3180E99
+:10A9C000F1087BFDE21E4963FC85C3C80BEFFCD791
+:10A9D0002BFB284FFE9EF0FEF3CF40FAC47DE48FA0
+:10A9E000BBE7FA6DAEFB93DED41BDE2FA2F5AAB750
+:10A9F000637C7A62D2CED774C74526A0D660F39B1B
+:10AA0000C408E3677838ED626845B6A9BCACB71CEA
+:10AA1000F7C96B4BB78DE1E7FD17EA87C86E972939
+:10AA20003E9D0F5EAF9D9E6FBE76BCDDDBFEAE0829
+:10AA3000BF47D51B17F3FA831E44FC9651FE2C60CA
+:10AA4000FE6CA7BF2F673CEA8D22EED76CAF5894FF
+:10AA5000B81CE7A598730F327CDC5B1AA57D90FFCC
+:10AA6000A2DA4B7D0E7BC3CE6753C47ECE5F9A22A3
+:10AA7000B9A86866D719182F7A5EC61505153D3B2B
+:10AA800025B4E7EDFB2010AD174FE5F3C579058040
+:10AA9000DBC5785EE1B863DE1073F8C1509E88FDB7
+:10AAA000DB29A0F7B4F0ACA1F49DDFC5F3D0635768
+:10AAB000F0F34D1395DCF41E7F99EEE3F1AF534BA9
+:10AAC000E77CEDF3C53DEF8AA8B47EA6E8ABF7E2DC
+:10AAD0003D771D567112E33103FE5417CAAB0DFFCB
+:10AAE000E883CD34FFD1E937454FD03D7A15297D34
+:10AAF0003A2EEF7CEDEE48ED0A129E2D9ECFE0FD42
+:10AB00007E7998EB9B9E94EF36FC6E3E9DDAE9C70A
+:10AB10007D678CEFABED7D783294BC3CECB0CF75AB
+:10AB2000D3223E9A92BC94E4C0405961F72F0CE2C4
+:10AB30002B4F1EF31D11AE97A718AB79BF9386F765
+:10AB4000CBDA78F9A04B16BF1721134438FC8C914F
+:10AB500013B82E6EE472E2EE35BBE8BD7263DF7CA3
+:10AB6000FEBDBF05F5EA1D3EB82297DFA82DC2E362
+:10AB70004193CDCC3AD41B93533E40FBF4F688412D
+:10AB8000EFC75FC6F1D43509E238EC69D81FFBCFB7
+:10AB90009E4A95F4D2D852A0FB92C6AE01D2DB6396
+:10ABA0006B206DB072D7CEB93BD1BE55AB218EAE06
+:10ABB000EBDD953758680F6CAA0013F5B8FF46B661
+:10ABC000C0587DD5F0A53150BC29B58CEE6959CB64
+:10ABD000D6255263ADD140F6C3D1182F072AF839D4
+:10ABE00098AE331582C3BE7F9CEC4EA61FFCB5FD0C
+:10ABF000265EFD65C015D48F7F2EA7AB71573D9D96
+:10AC000053EB1AF310DD4B635D033CDE69C7A515FA
+:10AC1000C65F6C9CF62BF49CFE9523A1E4B79DFCCB
+:10AC2000C0F891E44C17E613E4C0676798E3F30EAD
+:10AC300021E706FCF0298A97B4F8E83E176FFD6516
+:10AC400002FF775B4BFEE10C23AB6FECEF078B0C45
+:10AC5000977FA3E20395E6B348BE1174A43BB39378
+:10AC6000E8FE17BC18F4745A9617943BCEB3DC1B5D
+:10AC7000EF85C98867DB2EAAE5F68C7DEE91E12190
+:10AC8000730FFBAED705E87ED1F14DB9ED23B5408A
+:10AC9000FBA8ABC8FC6918F30D443EFFD7972F21E2
+:10ACA0007D9FEFDEDABB235CCEDF2559951D489FE3
+:10ACB00049FCFE196FBD83C25E64F620F1CD268B80
+:10ACC000DFBBB5896D7D1E45BEBA9EDFF3C7DEF3DF
+:10ACD000730E06D079F1D80DCBB45CEBD51B57CEF3
+:10ACE000B7EE826A5F3257BCA556D0AD24AECFF71F
+:10ACF000F1E983E9B0478B6A81EEFFD2197DD0F686
+:10AD0000AD805E4ABADFD858528971A15B6F540D8D
+:10AD10007C7F5F65AFB510E72D41EF839823A3F4E7
+:10AD20009A781EBD223ECEE8769CF72EAE7894CE61
+:10AD3000C3DFFE54000275783FA9E7F7D938E9234D
+:10AD400067E96CEBAB7CF32BF4790BC397F3F780DB
+:10AD5000308833388F220B0CBA1FD9E8253BF4A872
+:10AD60001544DD0A467D2FD72BED2178308EF7CCA8
+:10AD7000F2F2A6F054C0FB6735A597EC754DAFA273
+:10AD8000725175A29BECF369DBF55CFAE153914AD1
+:10AD900097DF24E4895369C91B9AB89F56852939DE
+:10ADA000D6D9C12285DBD3AC29C573ADE1E5EDC9A8
+:10ADB000F2C79B42DFE8D97D32F107C92E468F707A
+:10ADC000C5A2B764C77D9C61EFF9622F3D3DE59355
+:10ADD000A5E73AA4A723BEA0D52735A49FC1EC249C
+:10ADE000B2FBEB019CF7A66FD22C7E0F8361F82C8F
+:10ADF000077ECB85DDA77CA0D079DBBB9676D0FE25
+:10AE0000632CEB03F37AD933E7BDD3078B785E78F5
+:10AE10005751624984F27281EE195E27E4C679F2D5
+:10AE2000CF8298871504A6E7908F16FBE0C11C74AB
+:10AE30002D8F703CA743E6E722B3F2CFF77129F7D5
+:10AE40007DA276FB83C20F50B81CE6F39D620ED044
+:10AE500079D2819B0AD3DF036C6EFBD02E57E25C64
+:10AE60004FF719D03E93EE7F4AA3DEDD145B4278A4
+:10AE7000BF0FF529DA56B55C4FFA53DC4F0C864408
+:10AE8000F7CA86C4BD1BF7A58E3C8B76CFD11A05B9
+:10AE90003D3E10AC485AA85F8BABFB2C09F56C69A2
+:10AEA0009AE2C74C8F598867E3AE4504B75FE96DF6
+:10AEB000417D99562084FA7C008D4966C73D127EFB
+:10AEC000A403F35DFCB5695064DCD70338EFF737B2
+:10AED000602FD9597EA687C96E52FA5A502EB5D71F
+:10AEE000EB14D739EDC63E70EEEFD8B8B7E2B81321
+:10AEF0004AD97846567F7AED8D7C7606D3B3222FD9
+:10AF0000674107EEDF6829B1F2C3E1ED1D686F7E8E
+:10AF10004B37BF4EFC93679FC1F8E29E48D9E8F9D2
+:10AF2000E2B9B09B2F06FD27C2EFBAAC4E087A30CB
+:10AF30002EFD0D83FBCABD7EC0F99F7BECBE3DF7A5
+:10AF4000307CC8A84FC972E9D9F324FBBE1CFDB000
+:10AF5000AC7CE581A92ACABD5F4D90F1EC30F25975
+:10AF600014F9E71DF0917FE81DD81F9DE180676708
+:10AF700084AF13E8F2BFD6E7F03F5EDEC3CBB6FC8A
+:10AF8000FBCA5DEEF29761C938B4BFBE7CBB1FD26D
+:10AF900012FEDE29F7BEF99108CF37FF0AA43A1056
+:10AFA000CF6BC5F9A46B1E9BAAA2FD74E50CBD1264
+:10AFB000E39F361CCF0A3DFD36E363C3210FAF0A82
+:10AFC000A755CC977A7DFB8CCF9C0DD84FBA6302E6
+:10AFD000FA0FC7404E3DFEA52E379C23CDC30BB7BD
+:10AFE0007DDE281F1CCA1629A71FECC588DB0F763B
+:10AFF000B2F7B31F45FB7856F6F7D7D9796627DB4A
+:10B00000EF9FF2F47B8D86175103AC527A1AA5AAF2
+:10B010006CDC2BE8B7CC8968FFED989FC1DC7547E5
+:10B02000BDAE02EB35FA86A937D27C5687EE8DA2EB
+:10B03000BFA84F8244AEFB77CA42C931D15943EF12
+:10B04000E101F1FB820EBD62DF63DFBF08FD7C0121
+:10B0500060FB7B7A2AC407E4FF91D05EEDC9989526
+:10B06000183F565CFC5184F11466F7AE12F6655138
+:10B070008DFBBBD71F747A94AFEB7AE823FB3FAA12
+:10B080008533329E6BAD73E73FDD59F44592BB2BA0
+:10B09000F7F9C9CE5C09C6ADF533691D921FECFA0C
+:10B0A00075A7539CF8FA32236EA15C83B8496D3DB5
+:10B0B0007CB7EA0309D20E3FC12AA55FC5F5B68A5F
+:10B0C000E90FE7FBEB62B2F1468EDFDF643FFDA0E4
+:10B0D00019E11AC4838F9FA7D559D931CF233D5287
+:10B0E000238FCB19C5170FB37FBF2EA6D238CBD66F
+:10B0F0004D29E6FE21B7DC7C57E8A99F3CFC2D9545
+:10B10000EEA3FAEEAB17201E563C2E83C6C67DF783
+:10B11000E10864487FA555D45F576D9773EA77CCF3
+:10B1200074A2BC94ADDC7F79D5B6407A316B7FD503
+:10B13000A3AF9F050CBE775BFBF74CC475F05DEECB
+:10B140005704ABEFAC8BD8FBAB14F8BFB9ECA9CF6D
+:10B1500047B9BD7DF847454DB8BEA52D3BBF48FD5D
+:10B16000F65EEA0F38E2734BA2FC7C2CABC7FDA065
+:10B17000DF91D25372C4EF6CBFFBE1EF481CBE1DE0
+:10B18000FE7410E1DB72BF9A6470ACDAF21EC993F0
+:10B19000055BBF17453CACDAE18ED3ADD8FA610749
+:10B1A000E6A1AC90A17F31F2B37C8CCA474DAD5F74
+:10B1B00026B9CFCF57AF2492B07A3FF8EDA2DFB0D7
+:10B1C000EF6FC7640832D1FBF6BE83EAE3584E86C0
+:10B1D00053B8C35DB5C32DF7566D799DF222741F28
+:10B1E000F4579C8DF9016EBEF6D667EB4745FB69B7
+:10B1F00055EFBAF7D0AE5CB5FD9D5FA3FC58E59165
+:10B200009F6FE37FCA87FAA9DBA29EFB69B61496FB
+:10B210003FB1E27B47EFB5D8B887B7FDEE5ECCB360
+:10B22000BFFAA3F7EFFD67B4179E0AEA28FF577D20
+:10B23000F7852838F8F11EB1FEDE9D045639ABF7CC
+:10B24000EE7F06D278A0F5DD277F3B19CFC9BDFB85
+:10B25000C81FC719ACFEF54F9E47F7F25FFFC30545
+:10B26000E387B3AB905FD301275C69A2ABB143E244
+:10B27000C6CB13E2E9A1C7E1470654B477FF2041EA
+:10B280003FEAB995BD1FAAB83FD963423FE267F7CD
+:10B29000F6D7F77C9595DF61F409E4A00F9BFF4496
+:10B2A0001FE96F2626D973E5F6D71721BCABA09FFF
+:10B2B000F4E9107A3ECFE839334B4FEFF7A3704CE7
+:10B2C000C57DC1AA8719FDCE423A32FA9D35947EDA
+:10B2D000EFE07FE60EA5DFE351F7BD0947E1EAFBAA
+:10B2E000CA7163BA7D6CCE3C886C9C61F87B506CF3
+:10B2F0007930127EAF90385C5D51F3A728EF0F6F65
+:10B300002B1AA4EF62A4EFF78E4E46E3ED4D7FFFBC
+:10B3100017110FFD4F0674FCFD12573DF922ADB316
+:10B32000777FF89C6A505C07A2D26C5686C19FFD5D
+:10B33000C0CA2BB90F1CAE79E0FF2FFA356B7F0D19
+:10B34000EB02F7998C6E54DEC3D61DD1217D61A32B
+:10B35000817A335D46F35E99E6EB61657AE7C578FD
+:10B360001F8517EFFE62FB3ED02C3DF1BE8395DBBF
+:10B370005F5D847C978F9EF6FC759CFF1CF6FD013B
+:10B38000F77AF5D65FC9D627E9292F7DD33B7F8190
+:10B39000CF77EF0F28783EE35D71AFAE97EE59FCA3
+:10B3A0008B73F3A38C431DF7F0C7601C4AE0293F61
+:10B3B0007FF0753ED2FC468BBF77A2868B8F6C3CAC
+:10B3C0001E3E965BFE4F2CE6726325F434A2E9EC38
+:10B3D000B55714485A132BB3F01E46FB82C17BF8B5
+:10B3E000BB32F9853A7A77931CF7CA8B9590FBF7B5
+:10B3F0006FD516737B71E58E9D67A15C3BBCEB47F7
+:10B40000C49F2B1F7E55C57DC79E2D3F50FB6AB341
+:10B41000EB01F543DA81EFC3DFDF79169707B9FD5A
+:10B420005E73C57C563DE1EE7FD5C3EFB9FA5F612F
+:10B43000F592BD30D2386F2BE6A538DFB7F7F9E9C2
+:10B440001EC2B77BE5C65C76F0E462BFCB0EEE7839
+:10B450006ED16FF03CECCCFD21BA7F717BAB39FE35
+:10B4600016B4DFF6FB457CD1FC1DDAA5DB9F0B9102
+:10B470009F67FBFECF503E90DDDF631E7CCE79DE02
+:10B480005A1061FDCDE94BCC948DA172A3EE00DB87
+:10B49000EF39F8E0FAE71AC7A3DCC7FDB181BF5F57
+:10B4A0004E89D3392C39BA88F2CC65DDA70773EA07
+:10B4B0006FDE9F3FCCF7937EC698CEFBDCCF3DF688
+:10B4C0001FB47FEF88FB72E2E13E817FFBF73FD93B
+:10B4D000EFD74B9C6FAC67793C24DFFADAD81C8B32
+:10B4E000573354DEDA5C17C7B8CFB5C5FCBE9EB182
+:10B4F0006F18129E2D99DB674CC7F917432FE0791F
+:10B50000FFDB9BF5B8333E5476D86CC17A67BF0930
+:10B5100071AC87E3E27E6DB4E35AC5FCDCF3907155
+:10B520006B7B092F858CAB9DC0B8B79E8271C327FA
+:10B53000806780CD058DEBCDB3F28EAF4EE379639E
+:10B54000DEF192B63E10F1055A7AC3F8DBFCA29FF9
+:10B55000A5C586EBF7958192A17BABB3791769A955
+:10B560007326C6EF06CF1B2734C77963F69DCE1B23
+:10B57000B7993C0F96B5A375D025FC1318CF5CE6A0
+:10B5800080F705219F0215A918DA5F9D79E211AFB6
+:10B59000083EEF8C346838999DFAF4E2BE61F48677
+:10B5A000B2E69B339CE792153D23B9E2C8E6EB7403
+:10B5B0007F56BEF6DEF8A20D7FE7CE7F82AAA9985D
+:10B5C000379B80D61C706E17EB07EB5562BD581287
+:10B5D0005A1CF5D4189FA75DEE147EA1576E7DA569
+:10B5E00093E2F679F0B443D0F30574CC97D1F64DDD
+:10B5F000C3F86F57C44772B22B98FB1EFBFF2CF6A3
+:10B60000B9E4A48AE71FC90FBB8FF68DC6B1974D69
+:10B61000BC1FE9D65A95FC6091FAFD543E6AFAC8FF
+:10B62000FACF871FFB3E83C1721EFF53BDCEE9BB1D
+:10B63000DBDC46F9B1D74D558DE1F22D426BA6C545
+:10B64000316F425B73761CCF6B876AF8EF61D8303D
+:10B650000FE26106DF863CFCF13F58523CAB0080B4
+:10B66000000000001F8B080000000000000BED7DB3
+:10B670000B5C54D79DF0B93377EE3C813B30C0F082
+:10B68000BE8310D1623A28A2363E2E0F0D3E62468E
+:10B69000C4A809D6D13C4A2218B436A11B1B2E02DD
+:10B6A00082F8C2266BCDAE4D47A22D6DD31653DA6C
+:10B6B000358FF61B4C74ED635B626CE2F6D30613B8
+:10B6C00037AB59D365B7CDD6ED9736DFF9FFCFBD90
+:10B6D000CCBDC30C68DAF4B7FB7D4B7EC9C9B9E7B2
+:10B6E000F53FFFF37F9FC77C4AE4089949C8EE2DD8
+:10B6F000840C151342F8B08DB808D95762B2433A9A
+:10B70000284F4F1AA6E987F0B7606C6A6DFEDB1907
+:10B71000553322F9CEBC442E48FBD999F73819A6E7
+:10B72000A9F5831612A0EDAD3C91FB69EA96C960BC
+:10B730009287E6E55B7C561F4D5D24C3544ADB953A
+:10B74000DFC2EDF08DED7F30E711EF5BB45DBA4CF9
+:10B750003220ED2C17324C3A787ABED04402749CD9
+:10B760008E72612DC0690D7F9E480991F2274513A5
+:10B7700021A9F47B5D8F2CC3FC08C90824C03C4977
+:10B78000468DAE5E0F47D6F4178F1DFF10E087B6CB
+:10B79000DFAD96EF9BF3CEA17B29FCA22C95986997
+:10B7A00037FB06AF92FC69341FBE2A73302F0F9906
+:10B7B0006E2763FB817A3E5A2FD11B241B00CEECEF
+:10B7C0006112A4E327160D1398BF43229249C27E4B
+:10B7D00010FEA4D92344A1F592E60E7B9569BA7EAA
+:10B7E000FE608E09A719E649D7D1D15CEA2F48211E
+:10B7F000C4D63CDF5F40D725811F2222ED2741625E
+:10B80000F88F6EF7CF490C3F1A5E7ACA6F490AC6A5
+:10B81000E87F747D5BCEA4F1165DBEBC670DE0DFF2
+:10B82000E2092A30FFC4D90C2F5A79A2344C643A69
+:10B830006E2261F324A5443E4693845285C0387439
+:10B8400048593F9F07547A7C409D0FFCC969588F27
+:10B8500010FA29415E74D57C2BE479F256112BFF46
+:10B86000D0477041DFB2A979F3D87CBCF94C94EE93
+:10B870006A21E42DDD7C6DD974FE5ABFF4DF1E0B06
+:10B88000C900FC7E54BC09DE61A407EDFB3675FEE1
+:10B8900016CF30E2670CFE8A19FE9CC50C7FCE28BD
+:10B8A000FCED55DBEFFD2F86BF513C71A63540877F
+:10B8B000D178D4EA578CC2AD205DD276847C0AF26E
+:10B8C000816AE0DF1E3BCB1F12EFAC06FE00BE9A82
+:10B8D000805F08C9A44D7AB82E28CF1545ECDF7AD1
+:10B8E0001F9507FA7C50930F6C5C97CF5F4D283DF6
+:10B8F000139F891CA328ED9AAB7861BDBA9153229E
+:10B90000FDFFA33809EB774A8289FB244DCF2C4CED
+:10B9100007B9D966EBB1C17CBB2C3DD84F5B8E49D2
+:10B92000EC8D21DF4EABF335373B671C9D111F8F2C
+:10B9300066810463F1FDDBAA7C6B1B7CEA8C99D2E7
+:10B94000072F09929DC20B4CFFB6B6BEF9B43DE974
+:10B950001FF2F9609C441CC7A5C2E52A349156DF4A
+:10B96000C4701E57E98A6FB68F0B270F70C69033CD
+:10B970001A9CED00A7273E9CCE9C0AA453BED985F5
+:10B98000E30C8A125B0F4B936D239D9FAB35496A85
+:10B99000A5E92EBEA9AB0ED2210B5168150B91CF94
+:10B9A0005450B8F969D309A1FD745C9A659B04B43D
+:10B9B000DFDC43023A391F74042F89B43F5E0C92D6
+:10B9C00020859377293280F1AC4A07DABA91A264D4
+:10B9D00042E6D0F182FC0C90A7CEA080A9D68F467B
+:10B9E000274E8B4CC462E8C7248740DF416773222F
+:10B9F000F5E6BB19DEDAE6860354F691EE129EEC0C
+:10BA0000A09FDA8B28BD24D1BC45EEAAA3F8E87E1E
+:10BA1000D5427A757CA08D9BEB66FAC74E6A93C2BD
+:10BA2000D0B7F9B037388E3EB603DE68BBE60BBE42
+:10BA3000EFBCA2E115FE15133CEF38917633809FE1
+:10BA4000DF27C5AB4DA6F8FDFCAE45FACE2B3A7903
+:10BA5000D54C98FE20444A5F312D7EBBDD2D6446D7
+:10BA6000416124BF870F213EBB5DBD5DF9749E8A95
+:10BA7000DFE42FA4EB45B24B0D788A4E096965725D
+:10BA800070CCBAAE96C2B47D779189B702BD1690DC
+:10BA90009019F092ED41BED4D635E8607463F13070
+:10BAA000396976C998DA008F20EFCC7BBCE3C96B8B
+:10BAB0001BF0490C3C16B9291E3FF1DF0F8F1E37D2
+:10BAC000C1D499509304F8232FEF22D23400C3C875
+:10BAD0007F5A3B8DDEA3E75FFDDF7CFE1A9DC4AF7E
+:10BAE000AF68F6103F48AB660549A89BC37CC0967B
+:10BAF000864D29E854A5D8C2ADA09A72EAFA334E11
+:10BB000011D0CFEDE23B36145DFE0F53C6EB9F27FD
+:10BB1000EF68F83447C6D3E3C7047AE78C25748C02
+:10BB20008BE02941FCB47790DC089E9A6C208F3A18
+:10BB30005D5BCFF84A2378EACC7E4EDCA0A3F72BDE
+:10BB40006285E2A6F8D809766D0C7972AFBBA21DAA
+:10BB5000CA05536C797E48956B5480F30BE9380B1A
+:10BB6000468C789AA7E2697EFA3B8FC134A994E4A7
+:10BB70000915C815017F15E0AD6A4D00C882085946
+:10BB80001F7C2288F45025025E3865B2E943E78DB8
+:10BB9000E32F1EBE5C1C09C482FB19B1E6881BF4AE
+:10BBA0004931C59BCEFEA08421A27CD4D6C5E5999F
+:10BBB00080AED8BABD7C31DDA4D0AA9D5E5308FC0E
+:10BBC000190B69EA02BC93736602765A5A3803CBA2
+:10BBD000ADDEFC10E8BBB4B09DC8E82788213BADC2
+:10BBE0007F70ED5D7ED443D76F23614A3728CB4009
+:10BBF0008E65CB61B0A779512A374B30CEA336F092
+:10BC00006F3ABD354984D9DB24961ED8E20EFE007A
+:10BC1000D68DBF3E1FFB33D998DCBBD1F97C69655B
+:10BC200022013BC07E810B812E3BB0727ED77029F2
+:10BC3000C8CD841E2B4DDB78250C7A4CB96097005B
+:10BC4000DF5B0B95DB4D342DFF95BD88A7DFBB383F
+:10BC5000871FF0D05548979CF6F3BBA79C2142F371
+:10BC60003B572E1F49827E8E9A25287FF2C3A64F0E
+:10BC7000823D65FB603FFA8736D53F247CD32C5844
+:10BC80003FFB479413BBF91EA4FF5D05D36D7AF902
+:10BC90009EEA080E035EB4BCDD4BE5DB0CA4A7B73F
+:10BCA00086293D99148E7C48E9D3E6DAE63D25C124
+:10BCB0007CE9778D3E7C917A11BE35E63D14D760E4
+:10BCC0006712726431D8919D206FD06E250A07EB00
+:10BCD00096C1CADF3FB06231D8A19D76AD7CE562E6
+:10BCE000599F57FE7006F3AADDEB4FF6EC82FA9EE1
+:10BCF0002CD2C4F01320AB74F64C41328FEBD6E754
+:10BD0000967FEFD6D9CD1A5D761530BA7CF9626789
+:10BD100035C8CD4E4A975609E87097C14FD6528D17
+:10BD20000E3B0B189DC5C3BBE57A0909EBEC408BB4
+:10BD3000A707E9D1E609A01D1D5D7F450AB363345D
+:10BD4000FAB77909F2834D0A3E753FF287CB0FECC3
+:10BD5000672D68221CA5138BC8FCE189E6110F3EF4
+:10BD60008DFE3B0BF215A0D7F745E227E3D4B75C75
+:10BD70002FC5F96C71CB93927578F4E451BCC798D8
+:10BD8000CF5792D97C3A027581FB69BF72BDA4205E
+:10BD9000DF7889BF1BF412257FB03BA9BDF9C9E448
+:10BDA000543D9E983DA2F5AF704D8316E0730F6D24
+:10BDB00047BFB6939714587A8B2764E0EF2FA604F9
+:10BDC00067EBFBE145E61F2E34BB4CE423E0673F05
+:10BDD000F5CBC293A99FD82262BAA7C58B69578BAE
+:10BDE0008469778B4CC256EAFE90EBE7EF053BDBAC
+:10BDF000E540F826A28B8E163FB66F6F99CDFAE11B
+:10BE0000343A9FBA0BE8C261D2F8C4BF0BE83CC910
+:10BE1000AC959761BE8763E58F242F58AC14E37C03
+:10BE200050EE754D30AE395486EB77F3FDABF25BD7
+:10BE3000C5DFFE798F54E703FDBD6126FA38C618C9
+:10BE40007A09B3F16EB4FFAE6C13CAD3FDF3769EDC
+:10BE5000F1D1BCE575DAFF78F4D8C3FA8FDB9F0621
+:10BE6000EFE02E84D74AD7DB4EFBB38A4CDEC7E324
+:10BE700087E8F9D294207F7808CAE9FD836BC9CBA3
+:10BE8000C09F7458BB087C1A9021DE25B4531CFB5C
+:10BE900041DF06C2CF80BEB571E418CD0B2ADF505A
+:10BEA000B5AFBC4CFB11641BE9A6ED06E7DD45A070
+:10BEB0005DE72B360A13A5D3947CB417EC85B5A4A3
+:10BEC0008DD6DB596D2766FA3D69FE1A02FDEDFC41
+:10BED000991DFBF79D9982FCBA4B647C34A11CF23E
+:10BEE0009A4858AFC76D8E483E1FE4E57D24300D5B
+:10BEF000F9FA693D5F533DD90BFC24902A8570A067
+:10BF0000871FF0333B4451E569E05832DA81016C18
+:10BF10001FB10B9B8808FC7ACE1CEA06BFC4DC80EC
+:10BF200046DF22F361DB30F2B5BC3CA38C10170373
+:10BF300081ECF287492EE025C34C6D31204B818482
+:10BF4000A9DEE8A1FF007CFC85AB17C8AD84A4AFD7
+:10BF5000110CF3E02F382F996E05F8587D4D0FF135
+:10BF6000171A1BA13E4F74F5D19FA94B1ACF2F8CE6
+:10BF7000B6E30793557FD0497240EFB5B79C206F69
+:10BF80005B22FDF05171252DD5ECF9875358DC6209
+:10BF9000949E2446DF2F503F1DE8B1E31766D21B65
+:10BFA00083BEAF27FB0CF66E46D014991FFDF795A4
+:10BFB0008BD68A8306FA1C7FFDB3EA8DED739A1C3B
+:10BFC000063CE635271BF23E25D3507F5257BEA1D3
+:10BFD000BCB067AAA17CF2A1E986FC94D0A70CF5BD
+:10BFE0003FD15761C84FEB5F62A8FFC91335867C0C
+:10BFF00049F86E43FD1967361ACA670E3D64289FDB
+:10C00000757EAB213F67F8AF0CF5BD41F1E409E067
+:10C010004F4A8F668AAF5D19CA21D09FC36DD48EF7
+:10C020009BCFEC63D0B7249BA8F631554C694057A1
+:10C03000ECAF1DF400C8F93D8F85BF807AD2E407CC
+:10C04000FEE50B16C91BA15DBB68225E9D1C911607
+:10C0500011F85EB1C78DDFE5D256E40F81AA0D7BE2
+:10C0600022E86DE37A10F376D20FF0BDC1E0E3452C
+:10C0700025A67C12B28DF46F25F72405C6B1FB2CE2
+:10C0800092B1FECDD2BF2F45A5FF1C4AFFE689DB4A
+:10C090006B74FF90499E9CC2FCC3AA731E83DF830E
+:10C0A000781DF57B6CA41DD8A9BC6E24EB14ABAE37
+:10C0B000FA3756D3879FB871FF269ABF684A714EE8
+:10C0C000D7C9CBE4B566DF8FD587330CF65974DA60
+:10C0D00096F810CA3B2A17CB530C72315005F31354
+:10C0E0007819E5A2F6DDD73715E57297C8EC944EBE
+:10C0F00089F2E538F88A96CB5F4E9698BF18473E8E
+:10C100000B54CE82C2DDB9F2D35D8037791B41BDBD
+:10C11000447510CAD9E8FEA95D7537C2E965F4A473
+:10C12000F9439ABF65A3F203FC2B9B44105F568A28
+:10C130002F27DA478FA27D49E721817D64F550FBE7
+:10C1400013F43DB53F99BDF9E7B52FF361DE7AFBF6
+:10C150004FD5972187DC94921ABFFF17E3EC479DD8
+:10C1600049D6FCEEFF9EF427A718F1A1D1A146679E
+:10C1700056203A3ADEFB125B77DA2291D3F62F246F
+:10C18000F84F10E9E5D4ECB34A25AC5BD0255BA9A8
+:10C190005EDD37BB06DB0993780272266178C33215
+:10C1A000D093A494C90985FE03F4E62836CA0D5B32
+:10C1B000941E15401F278ED5BB9A7CD0FCF389E4D2
+:10C1C000CBB752D438D92C324B2F5FE2F9E19A7CAD
+:10C1D000D1F0B0E0831611ED8E0F68B9664FD07EB6
+:10C1E0002C397C00E2CC829FC84762F0DFCBAA5E8C
+:10C1F000EE3B6997812E5D6B04F4B332FDE172C8AA
+:10C200006736113FE067F670980469FF3FF4B0F5B8
+:10C21000C8F48738B0CF332F873880F3A085C58521
+:10C2200032B785387DDCE89AEAC7FDEEE2A37E5896
+:10C23000F78A3C17F2E9671713A48F21EFC69E72A5
+:10C24000D857984BFCC03F2E0F4F32217FDE1A4249
+:10C2500079E21F51A8AF4392E944614DAFB490E930
+:10C26000F751FFFDDD161BA6D75A444C2BF38A0766
+:10C2700017D07A5B7D0E8C1774E43B709CCE5C010A
+:10C28000C7F98F9C87F2C02EF8758B17EB773DDED0
+:10C290005404F184CE93FF8971CD083D53AC7901EC
+:10C2A0009E30EEF710BEC90BFBBE49F20CDC27ED49
+:10C2B000B404FF7103C413D70AFE6331F837E9E50C
+:10C2C0001FA19F0CF8013CB4DB195EACCE26BF1B4E
+:10C2D000E2FD93C8FA15B1F854C513A530B340E98F
+:10C2E0003789910611E686DA1241AFFA493F059B7C
+:10C2F000583A421CEC8790074509E245D9B6D02050
+:10C300009467D78BFE36AC4F705F415B278B9D04E3
+:10C310008EBBA05E98DB42BFBFE811D9FA0D8570D5
+:10C32000DFFD37176E1FCC21F1F97B4F4BF5D92A72
+:10C330005D3CD64562EF0BFFCB6D15160FEDF77622
+:10C34000806D26ACF7AC71F5E38DF67BBB8753E3CC
+:10C350001393D3C15E6EE663DB996691AD0FC47F24
+:10C36000C08FDE5A28A5BB5DFA7E183ECC279FC73A
+:10C37000F57116B3F9B77DEF8DCD8F513AF977DAB4
+:10C3800010E255AF5CFC0CFA8FEF254BFBC1EF526E
+:10C390007E6C26B0CEEF7D7FD669589431F36E392E
+:10C3A00093CCEBE249EF7DFBD5320BEDFFBDE75EB1
+:10C3B0002DE3510885101F5A79E387AF9541FC4A58
+:10C3C00068FE4DE6650AAF52418A9A204F0D68E635
+:10C3D000876E591A1E076F07D31ED802F1C2509BF1
+:10C3E0004BE4A8BDF625E71F05A0C766809FA60FF2
+:10C3F000DB4676727489B9F4779754D1FEB6728AA7
+:10C40000E2E2006F8A15FC0A72C1EA07BAD95AC87B
+:10C41000F4E5D607C59002722CDCC4C8DDF65AE6F6
+:10C42000652A87ED3F0DC11900D2CE052A13207E63
+:10C43000378D20BDDF76AD290FF695DD44C8073A6C
+:10C44000B498CCD8CFC84567A817E56FD32C9043D4
+:10C45000AD171F9D0CEBF57B55BE6871B73453D3F8
+:10C46000813A1FC4DDFC1877DBCDF7639C3EDE7C90
+:10C470009D5EB6AFC0571235DEF5DBEE7076841EDA
+:10C4800034FE8A6EB7B785F861BC975A6C98BED0F7
+:10C4900022627AA2C58BE9F75B244C075A8A30EDF9
+:10C4A0006BF1FB0B2C00E76C4C3B2C647D40476729
+:10C4B0005FF0B0FDC87B92CABF0074FE24EDF73276
+:10C4C0006DF745DAFE32AD3FAF366C86B8CCBC11A5
+:10C4D0002A2F2528EFC2EFFB697F506F6CB9AD049E
+:10C4E000CA4BABFBC380C7D262FA9D407F7D587FA9
+:10C4F0007FCB093F2B1FAAB450FC96FE96953BE7D5
+:10C50000D27E68DEA9F643C72F61F567637F745C4E
+:10C51000CCC7E8B784C173A224163CD1F5A9956FA6
+:10C5200026548F88F0BFE0EF59240EF75138123EA1
+:10C5300006F2F882B51CF4E79E12926FA2FACD9231
+:10C540005AC041FEA966229A4BA8CACBA8D9554E1B
+:10C55000A09D8CDF95557CE8980FF513F6ABE9A705
+:10C56000E4EA30EA9D243FC937BB69CAD381A753A7
+:10C5700054DF4722E70D503EB13CAE076D2756937E
+:10C58000C8790332717DAA5FA2CA63D3DB474D210C
+:10C590003EA63FF771701EB1835F4B7DFD7E924BCF
+:10C5A000F3AA7DF645B5DEFE7965491B21BFF8810A
+:10C5B000A7200EFE1BE2E5603F7EB47D943D77B878
+:10C5C000E54C5A55A1AA1440DE6F138FE8EDDC6CE0
+:10C5D00085D2AB8E0F7A9AF8EA5E8C2F04336A7498
+:10C5E000FAADC312CCA0CC4BAE3FF18F8B413E8055
+:10C5F000BE06393D7784E9F751BDFE5B261F357BCA
+:10C600004250D76B9FBCB12D01F7D3A83E92C0AE6C
+:10C6100008920ADA3EB17CEBCBF09D9418BF270854
+:10C620008C8F32BD210EF2999EC04F3CB0DF907CC2
+:10C63000487E86CEF7B7035609E8AFEFE4DA7A888A
+:10C640001B3E4C12253BED27F3A54B02C0D1611ACE
+:10C65000168008473CCD4B786A0775089A9CA486DB
+:10C660000F5DFF8E34552E90DF7757D1FA074DC1FD
+:10C67000AB54578ED63FE8086E813CFD936D54AFA6
+:10C68000EF1D8DA36FEB96294DEC55E3E6239ECF6E
+:10C69000762BD990A7F5DD2CDF4EDBEF750F794DAA
+:10C6A000349FC86DE93E930379ADFE966E85B6BFA3
+:10C6B000EA61E700882BE803B9379A17693E41978A
+:10C6C000E7599ED858DA77F23F05D0431D6923A772
+:10C6D000B3009F3FE4FA41BE36BEFCF541C86FAEE1
+:10C6E0002712C4E7324F1CC175F8AAB97C04F0D6F2
+:10C6F000D7724644431DFEB475A176EA142FC17863
+:10C70000B210E242F960BF15F798D07EDB4E49B017
+:10C7100004F0DD9506EB5C91C6FC812921DA8F8E51
+:10C720007FA650BEB34E0775651919D6FB5BC46F63
+:10C73000027811E5F01FE57F2F01FDD4375B714CC6
+:10C74000A5E36DDAC0FB5B25D03FA15601D6FF04FF
+:10C75000877AC2772663C73768FE5A7F4A2FF81B4D
+:10C76000961D8C3E37F9FAD3A6D3B4C3CEE86293B4
+:10C770005BCDBB8DF976D59EF4BA157732FDBEF947
+:10C78000C4815C3000AF1E9B857EE4660D1E720086
+:10C79000E1B93A3827E9363ADFC69FB2B866E340D6
+:10C7A000C912987FE31E13013F6EF300A5271D7F7A
+:10C7B000ECA37C284FA6F3907BA6F2943E02070BD5
+:10C7C00096DAE9FA7E3D5F16015FF569B7EEB6517C
+:10C7D000E7E8EB823805E8A13EAD7437D0D3A6393F
+:10C7E0006F213D26A596FEA49AE2EBE8DDD54B40ED
+:10C7F000ACA599185F5282433967766F43FCFF6B93
+:10C800003919B1BA119DB8CF9907FF47E19B2CCADE
+:10C8100015505F5C465D22A053217012EC10A5C23A
+:10C820008671D20A711996E7AE21A66E0ACF112938
+:10C8300039B99536B517C826B053F2030E8C7F9AD6
+:10C8400013AA76803F7AEC1CCB47D6E912E2C55199
+:10C8500014EAB7D17E6E71F122F8226966D906EB2F
+:10C86000467979E85829F00BB303942F1663BCE797
+:10C870006022A97F8EB63B6ADAD8FD235AEF68B2F0
+:10C8800087805DD9C171EB6BF07BC5D4AD743D8EF3
+:10C89000AAEB6776FB4558AFA36E637E2FB7F141D5
+:10C8A000C0DB23A92F2E81F9A559E59E140ADFE7E5
+:10C8B000525FECF666209EF36DB4FC737FFD42B7C9
+:10C8C0008DE2FD68AB9C29EAF293FF40A536CEE3EA
+:10C8D00005E453DEFDC587808F69F98F6D54FF7EB7
+:10C8E0003D59B307587941BEC6D7D4AF9D4DE168D5
+:10C8F0001DCD2BB622D8F78AD4AFA27CFED5A7CD0A
+:10C9000044EB1FEC09C79C7E9BC38CF3200EB067E1
+:10C91000A6F168CF38DC6C5D1D53F2D14E3A6A67E0
+:10C92000F81AC93161F922F3B322C407AC53781362
+:10C930009EE5214D01D0CF7C364F58BCF7B03C4529
+:10C9400082B029DB1FE47A56A07F682FD2ED071250
+:10C95000F0638DFB877C54BED03A9C61A27AD87379
+:10C960006105974BFBFB6CAAEA2F7A4806C4631F4C
+:10C970004D6572E6D18072BB45021A1B66E75649C7
+:10C98000603AA4E9EB0AD2C73BBF32F65C4018ED2F
+:10C99000B23D2E938AB749BBC305D45E763D27824C
+:10C9A0001CA16A7EC761D06F1E1EE9A610F89FE623
+:10C9B000B7B9591CDED7B7E44BB3C13E7CB5D00440
+:10C9C000FCCF8B7E11CED99527942681DDC68FD2E0
+:10C9D000E9EB4BC240378373EE043F5000FEA59F46
+:10C9E0000FDBD9F9D0910CD20F7161DE2B13FD3E14
+:10C9F000A1C6BF3B5B6C98527FFE5DD01F5FEB22F0
+:10CA0000B84F2078039897DA09077CF1F2A7EEC6B1
+:10CA1000719FE10349EB40DE9E63763D900BC63982
+:10CA2000C24F7010E778DF16488279EF771BEDBFB1
+:10CA3000B23466C776A632F9D9D9C2E2A0C2F54FA0
+:10CA4000605CA7C3A2C923D7D2F05CB0E783788E1D
+:10CA5000D61ADC2683BCB21145117571725BB631F2
+:10CA6000DE255CBF95C58752D938D1E70D5C9CD6D1
+:10CA70007FC1EEF1FC032D8D3E9FD04C02288FC864
+:10CA8000103BF7B06D57657AB2AE9F6D9C9C2E8EB1
+:10CA9000431F0F5F379390EE9CCAC3FC8800F37965
+:10CAA000F8BA80DF897738B115F66528C175C33AC1
+:10CAB0003EFF5DD44B0ED213860373568853E8CEE7
+:10CAC00085122F3F324AFFF911FEC07D752E067F79
+:10CAD00048C67CF47EFAA3E03BD37F77387F2DC035
+:10CAE0003CDFAB242360871232BC08F8B7B1D28197
+:10CAF00071EA87498FCD06062EDF23EAE3C58D0351
+:10CB000097123794E23E960476F0C32F951BE254B9
+:10CB1000DAF9302DBFF9C4068C1F3E7CF49A30B58B
+:10CB200014C118B2507FACD1D673C69A1FA96FB783
+:10CB300004952CA0FF975AE52CFAE95B00279CABE3
+:10CB40006A9E340BFCBFDF8AF519802727AFEA8F76
+:10CB50003536D41FED76EAAF019D5E9C8CFA9416B3
+:10CB6000F3A09FB5F15778181D8EA8FE7C023533CF
+:10CB700001BF1D8EC01566B41399A7F64E47B24685
+:10CB800037CDDDA0FF0E0A11B908933DE860F9E446
+:10CB9000B4E6EE76A687B1FEC893FC6EB0873AEC99
+:10CBA0006ADE43307F50E8413F41F9BE5502380FFD
+:10CBB0003A027EF007951D5324D02755E92E9C8715
+:10CBC000E5EFACBD200F333DC1AB60B7100FB38FA5
+:10CBD000DE4BBD904B5C31FB19E16EA41FAFB11F62
+:10CBE000FB5C36FE7B9C39B0A334528FB60FE3B9A1
+:10CBF000807B6C18FFD1EA1FB618ED642D9D92C69C
+:10CC0000E20C204F80AFB5EF42F03EE45F2B69426B
+:10CC1000FEB57A8DFB451A3F0BD7A718E297DF4A7E
+:10CC2000F5E1FA687240B85E8CE59D2A9DEE847D40
+:10CC3000F471C7498E33CE0C9413F1C72953E5081C
+:10CC400051E3493C9E33D3F824BEBC30C671A3E502
+:10CC50009F966AF2EF884AC7FF600F2E4CA3FFFF32
+:10CC600050A87F91035B076F85F5F9A36AF716F566
+:10CC70001D3809E47745945B5353E13C957C1CD205
+:10CC80009BE59BFA3436DE5839C6E20FDB1E945022
+:10CC90003F3FC3FB1DFE1870D75F771AE4577EAA8B
+:10CCA00084FDD5F30ACAB1FAEB8958FED1FBB793DC
+:10CCB000D08CF1FA7761F968FFFDACFF973FF5E39F
+:10CCC00083B3A1FFE3169355E7CF6D3BBE301DE262
+:10CCD00095DBEC542E1BF95606BEE57D64D40F029D
+:10CCE0003EDFAFF945CAA2DD5573C16ED5F1F96CCF
+:10CCF000B0BF22ED79BACEFB1D5AFB3B77833D34A2
+:10CD0000A6BE33AA7EBED6FF6AEC3F1A1E4D8E40E9
+:10CD10001EEC2DFE0F560D3E9443074C51FD8DCA5F
+:10CD2000A520F6B7690EB33392FEBAFE270A0FF4B8
+:10CD3000172ACF023BEB4122C139E768BC27A9740F
+:10CD4000587F7D92615D23F8BEC5F0FD9F5BBC24DA
+:10CD5000A4E3B7CF04B72D027E4BD2D689283BB1CE
+:10CD6000DDE12C12D2F1DDFFC0F151E1B82D0E1C36
+:10CD7000F3FFC270F80C7C1981A3C0F0FDA3C2615F
+:10CD8000B65DCFBCACCB5B4492A5CF97846D599771
+:10CD90007576CB8C33A2213F73C86BA83FEBBC6484
+:10CDA000289F335C6428BFED8ADF909F3732DB50C9
+:10CDB0007FC175D9902F278B0DF52B6D2B0CF98525
+:10CDC000E25A43FD696A9CFC76EF0643BDC5D283F7
+:10CDD000867A4273CA77C07E59F0C1021BF8173BAE
+:10CDE0005DA6EA10C5CF4E3E684B8E211FCBD47E88
+:10CDF00047F59D370DDB2F149BDA411E2EA4AE7034
+:10CE00001BB5D7D2EB02EDA0F7AB45229AD16F0E3E
+:10CE1000B1F8C9072BABE0FB9D8B89D8ED8EE46F91
+:10CE2000FF2B42206FCD96F15C9BBDD884E7067640
+:10CE300017D78CBBFFB04FB5DFF744E9FB51FA3190
+:10CE4000B3F393D1DF8BD3195D1D58B08FC03E81F2
+:10CE5000CD15C27B3E8353767A21FFA505DFF6828E
+:10CE60009FD135E5112FD04F67CE570DE7F21C0546
+:10CE70006C7F26BADFBF55FB2DB8FEA80DF4E7EE98
+:10CE80006C86CFE87ADAF9F4DD361637FFB8E6B902
+:10CE9000F8639AE7E5746667EDB68530FEDF5DF40A
+:10CEA000F1C07FAF3ACE81058F1306EFE3780EB95C
+:10CEB0002B4790F47A564BE1DE28CCA7D3B7D30B9F
+:10CEC0007AB7CBF788C1FEB7C27C628C63F3323C81
+:10CED000ED163FDEF93CFE27CF6767CC7D775B9C84
+:10CEE00079156BF3F2AAF7283EA6793DF5179E5700
+:10CEF000581D2F359DD9A7BB25C64749E6C0CFF39E
+:10CF00007DF1F92F69B6F19C5282DFE807E417043E
+:10CF1000C63D7F745EC54F3C7E5D635152018ED726
+:10CF20005BD839DB7380479A9E0F4EAA80FB0AAF0D
+:10CF3000C3792D0EDAEF48186F1DD606CD063827B7
+:10CF4000920F25E9F9888FD56B8CED56059CC6F3B9
+:10CF500052EA39038AA7FD105FD6F036669DFF4C72
+:10CF6000788A476F378AA7EEA29BC3D344F49D9A71
+:10CF70002E21BD4C84278D8EE2F5F3FF2A1D2DBE98
+:10CF800071FC20FD7CDCF8F9AF463FF7A64B37C4B7
+:10CF900067FFBFE2E7F11BC4CFE8796B81D4C73AE2
+:10CFA00007D2E915900E27734D6717839FBDD88C64
+:10CFB000F1B3D70E1734927C7D3DA6075E5B36A990
+:10CFC00011CF8F553BF1ACD65953EC7E5F53F1F145
+:10CFD00090D7AD9EA7F3A782DD7BB67AE5B8F322A2
+:10CFE000CBCCC6F38BC411999F99F64BA40A8C9FA6
+:10CFF00051BC1E1B67DDB5758B37DE8DAEDBD9EA04
+:10D00000B69B5A376D3C8AA798EDEEF6E6DF10DF47
+:10D01000C309768637761EA0EF7166B7F701BE6941
+:10D02000BFBF84A20CB0FF09C6FD56AF493F02F056
+:10D03000BEE665F1F001416AC47741562EDB0DE78B
+:10D0400051CEAD727310D2D0E038A6AE67595D6C88
+:10D05000BBF339B53CD29E2393A5B1F58EA876CF0C
+:10D06000AA3A0EED07C2CB39FA773FFE21AA3CBAA5
+:10D07000FD4BDE442C3F17E73CE6B7D4F6AB6BC75D
+:10D080006F4FEA53F0DC1F21528EFE3EFA285DA955
+:10D090007CB0C21BFCBE97D67F9D0B7EF973104FF0
+:10D0A0009DE2C2F33D84273ED8F71FED8797F1BC80
+:10D0B000C6E54686F7E87E75FD85BDA9F1FB8B8741
+:10D0C0005F6D5EDA78A524807E1DA926E27E36BEDD
+:10D0D00019CE39DC59499A707C5E427852DEA4FE42
+:10D0E0009C2F421F174CD23ABC48A3F633F0FBCA20
+:10D0F000A5D0CFC05993B8C3171FEE78F2E09F5464
+:10D10000FAF198833BE05C0159CFC53CB7F72BAFF0
+:10D110001DEBEDF78EEED7E338B73C19B448B4DF1A
+:10D12000BBD4736784047356E8C6DFAFCE3BBA9DA9
+:10D13000C7CCF6C7C91B66C45F5FEF4339B1F8E7D8
+:10D1400035D55EDEEF2D32F8C7B5812D16B06B6B8D
+:10D1500097ADB0482E289718DDA970F409C19C122C
+:10D1600057044F71E58F8A9F81F3413CB7B1BE9957
+:10D17000C373C7C5DB19FDADDF3E686AA4E911952D
+:10D180000F57C03E93AE3F77069B5F5FAF2317E01C
+:10D19000EFD39FBFA0707CFA10C1B89D2DE3E93D8D
+:10D1A00010B71BE6881AE7332D87FD8661755FACE3
+:10D1B0009096B702BC55A9C8E7EBB7AF403FFF96C2
+:10D1C0006AE6E70F0804CF01BD392F2104EF1D10D7
+:10D1D0009B3CF828CDBFF58724D2ED8FD0C71342F2
+:10D1E000781AD0476A5BE073B1E2D35206E3F3DF0B
+:10D1F000BAD83E5E3CBC9C55E5A956AF86972CB18B
+:10D20000EAAFAC36CA350DFE146BF83D12239E3ED4
+:10D210004A8FA1F1F5DD2F5439FD5A94BF547B3E5E
+:10D22000B6DF3237433DA71BAAD884FA4AB14A7801
+:10D23000B65885C7A3AC467C7EB8948890BFD32AE5
+:10D240003D0DF0DD556B8E92C321EC67FD32A76179
+:10D250005E4FF4FE781ADC4BCA2F60F2F7FD2217FE
+:10D260009E137F80340970FEAB8E28F3912F896462
+:10D2700001FA3EA7E24F83EF1C91136682BC683629
+:10D28000C7E4AFBB543A3A17A85C85E7DFDBCD783B
+:10D290001EE1526DCA72887F2B018B1F8E375D6A2B
+:10D2A0005F9970BF6E5D35BDA7D935E78395E3EA19
+:10D2B000AF5501E37AF5093DB8FFA75490A66394F2
+:10D2C000CE267FF9F2DE59347F36642A61E7DCD856
+:10D2D0007CCF86B2B473F1844FA3EBAE165D350DEF
+:10D2E000637DE56FD8BCD6D58516C296D83D877AC2
+:10D2F000F6CDA2F9860CB7BAEF387F1EF0EBAF9AE5
+:10D30000C7B707A2E9E996271D867CD97922E07B79
+:10D3100014DB62EB87F7B29C6C5F87F7E7C23AAC2D
+:10D32000DB1EBB9E3BDB85F5AEFED15C1FCBEF3E2B
+:10D3300090C5D6637D3D17539E1FC84A60E50DB169
+:10D34000FB5F95E954E59D980BEBB23E0EBC2B328A
+:10D3500013118EB73B56AF83FDFB2B51F655452677
+:10D360008343CA64E72BAFF6BED09106F4B09313A3
+:10D37000E11CD95B6EFF14A0BF0DED97D0CF4F57C6
+:10D38000EB3BD2034F66D0F4EEF3CF9D82FA0375E8
+:10D39000C4CF49F1F5C0E10C4D0F68F7A2357DD837
+:10D3A00063077D04FF0BFBAB1404252919D65D79B7
+:10D3B00008CFC5F43A44760FCA3F536F577F43A551
+:10D3C000E7AB476F6EBDEFA937DA4567C1FEF3449F
+:10D3D000ECBFAB82B4B7948E7B95D25B2B9D0FF9DB
+:10D3E000E0895BF5FA46E38778E3DEA81D78F5E887
+:10D3F000CDD98113CDF36719BE1BB203DFAF7E62B7
+:10D400005FA904F3ECB93596BCD5E4F22F55B918F1
+:10D410004D2F5AFA4B55CE5F098D0FD7670E19E184
+:10D4200059D7648447E38F2BA13607BCAB45479F90
+:10D4300006EBACD9A5A46AE60DBD17120FCE5FAB03
+:10D4400074F2AB66338F72EF2887F1E95F353F9155
+:10D45000182B6E153DFFAB264A0F401F4FF3287F58
+:10D460000AEB379C4C9322F4F87F543CFCA974A837
+:10D47000C9574D9F44B7FFAF4A779A3E9B88EE3C11
+:10D4800071E28F07326C88BF0DBC28C0FED1810CC1
+:10D4900089E589B8C80BF6EB6C76EE9D4AA85C78F6
+:10D4A00057E26AAF03EF8329DDD650215DC72BBD5C
+:10D4B000B74DD1AFE3EC4CB61EEB1BDC3B61CBFAB6
+:10D4C0008AC9BF381DD6AF86BDEF71EE7CF2A2745B
+:10D4D000DAFE892113BC9045D66DDB6086F9CDCC90
+:10D4E000647A64FDF657D1EEBB59BA5EDF64D4E7C7
+:10D4F0005FCE10553DC1ECF03BA95D00E708E3E1CC
+:10D50000A13093E1E19EFAE3284FEFDDCEA13CBDCF
+:10D510002593E1E35E3E847299B433FB99D8283EAB
+:10D52000A85CBA0493007CFC35C7CE77F30141FFB9
+:10D53000FEC6FD7B562F043B309A3FBEA7E2E92B87
+:10D5400099EA3B84E9C13B33D13F0C70D0DF5B9F4C
+:10D5500067F0AEDFBE05CF275FCC50ED6B953F2F58
+:10D56000C23ACD8CCC2F459DDF05C7C836D0179465
+:10D570006F4C78BEE47533C275F5ABDF6C827AE22E
+:10D580005417DEF7423B96E6FB9627845A75F13A2C
+:10D59000CDAEC9F7337EA8E565835DD890E933D871
+:10D5A000E9D1F6C6FFE80396F6A878FA4BE983C3FB
+:10D5B000AA5DF0A7EA834754FE8FD60BA37CBC93E9
+:10D5C000F1F1A5F3FFBE10F2D17CFCADCC8FA69794
+:10D5D000A2F9F74AEFDD48D7CA1222161AFCA39C1B
+:10D5E00010F8C1A3F41FF1933838DFF644EF4FA6CB
+:10D5F000419CEBD2DED5EB628DFF4416B3B33626E9
+:10D600004A267C1FF2754667D17222BADD285FC4B4
+:10D61000892FD6D6CC41FFF05CCD6DB970EF2DDAF5
+:10D620003F18539F935357817FDCAAFAC7FBACF591
+:10D63000BD31E0F566317CE6178C9C027CBFDFC013
+:10D64000E17D62F8D3DBE9779FF7FF60581A0BEFB3
+:10D65000685EF34FB6B3F1A2C779575DB751FF4487
+:10D66000A1FE09C5F370AD3911CEB16AFEC9B0F2A1
+:10D67000E7F54FDE2423FF300BD6F9686CB81CEABF
+:10D68000FCAF08C17D73281C579798FD0AF08B8961
+:10D69000B6D3F925D1EDFEA8CEE7CDED37298FCE53
+:10D6A0001BE3C9F1F86D14AE3F91DFFA84911CE0E1
+:10D6B000FB378F7C70F15198CF1107BE3F16DDCF3D
+:10D6C000D7B2CCAA7FE0403ED0F4EF80D0B3F905CA
+:10D6D000DAEECD3B32FD3B888E2F08E50BFAFDC21A
+:10D6E0001F295FF851BE211FF7F53AEB63F9298333
+:10D6F000AA3F141DB7117BBFD1047EB14CFC167D2F
+:10D70000DCE90D75DD7FA1CAA5A22CA63FEFAA5DBD
+:10D710002140BCE8FED1781141E7429C9A7D04FC8F
+:10D72000CBD7D47B02CAC68498F1DE992A5E278AB9
+:10D730001FACA933FAF577D51AE5C73BA1FC513DDB
+:10D740005238CE7E9446BFF1C6BB51FDD117BAB94F
+:10D75000FD8089E6F7D9AC1BD31FAB48D33C8C7353
+:10D76000D0F581B496344D7B81C2F3CEA19509608A
+:10D7700047FD82906AB4E33FF8EC34BD5D1254F18A
+:10D78000FC7EED67EF00727943689A164BFF44C741
+:10D79000697E118A7D2EE32E55AEBEA1DDA7B82B82
+:10D7A000763C7F8B3AEE1B75E3F34D74DCA67699DD
+:10D7B00071DE4A16B387DEA86B7304995FCDC6FD90
+:10D7C0001B362EE82DBD5DAA64FD79F4E330C4EF6D
+:10D7D000619CED84403CA54F50A6EACF5DA5643323
+:10D7E0003CE4178DBF0FA5EDA768F5A2EDAC9F67D0
+:10D7F0004A867BB3B5CB8C70B569F62D11310E72AC
+:10D8000015F4A527A22FEFB4FA1F043A202E09CB56
+:10D810004FA878BFBBFEDF2C307F2A3F3BF01EDBDA
+:10D82000599308F2B3EC7CC8A2C7CB851BF4AB2E8E
+:10D83000A8F6C2447234BF6804E5DBFB2117DE8F13
+:10D8400078F30BBFB3C4EAB7F67A96E11CF1FA405D
+:10D85000ECB88A98258C8B6731CB88BFF5D773F1EC
+:10D860005C703CFBFF10C8AF99608F1EE9D0DBFFF6
+:10D870004F6549AAFDAFCA339ED9FDF1E2AF432AF5
+:10D880009D4D147FD5F4B3562F7AFDB5345A5F0EF3
+:10D89000ABFC1C5DEF52D68DD1DDA81D1387EEE2E7
+:10D8A0008DABF91F5ADC37BF98B68FB12F33661C8A
+:10D8B000B55EF4386F46ADCF183F224EDC2E299B63
+:10D8C000E13718276E9794CDE2766709D38B4AC863
+:10D8D000897AECCAD17BF781B9F7C0E2CF9D06F512
+:10D8E000D6A8C66BEAEA5F3D057EAAE65744ECF18E
+:10D8F000601BEC935DDDC1A1BD113D4EB45DDE0842
+:10D90000EF15822055E307456619E3D4E43176BE6E
+:10D91000DFD3BC1AED4B2D3EDD27047624D0EFB7C4
+:10D920006CFFB76DA05F353FFE2D8BFF411667661C
+:10D93000F6EE855E17DE73DD3AEAFFF931DE38CAAE
+:10D94000FF6AFC71A2F518953771D6632279132FFF
+:10D950002EA2A5A3FB2C8254F80A9C4BE512FDBD18
+:10D9600034AD11080F78A859CEA19F5923C84B3167
+:10D97000DEFCAAC90479DF72DF6E3807BFB2DA2293
+:10D98000DBA5C8FE4BE96B0D85AF807F41270C7E80
+:10D99000ECC02FA57F82FBC1AF2FB64BB03F727694
+:10D9A0009E34E8A1F9B3777022D83D558BEF374FFD
+:10D9B00083F15671F80E8DB399A8E7B56F5D5E5986
+:10D9C00040C8370044DDBD8F1A6D9F4659BB0FEE2E
+:10D9D000CD4E4D1D30B9284ABF7B78ED3E1B85AB3F
+:10D9E000A335E085FB78F76597EC83FB786969F2EE
+:10D9F000D0026A471DCC9EB11CF2037FA3F557BA33
+:10DA00000FEEDFBD680AFA385AFE83EC65CB79D891
+:10DA10008F98A48DBF1ECBEF5AF2E0B16DB4FFB763
+:10DA20000F6F590E67D7CBEAB4F11F595EC953FA8D
+:10DA30009FABE51F4B84BCC74922FB4CB309B144E3
+:10DA4000EEF7E179F781D1FB7C2DCBE1FCF8EBE53A
+:10DA50004D95708FB3ECCB1DFB8AA710326B59B973
+:10DA600028D3FCDC9C2F2F77C2FE31A1F448F3723F
+:10DA7000CE57107E8FD9A4F61FDA2767033CCA540D
+:10DA800028E79467F655BBE13EC2F06920CB879B3F
+:10DA90007B6C69867B098A0CA68970A23C9C85E018
+:10DAA000A8FBDAD9E169ECBE9D9A2F62718AD1BCDC
+:10DAB00097E50776C4BE7FF2610E935F038ED8E5CB
+:10DAC0003D2ADF6BFBAF49E789FC6C0CFEFF3CC4D1
+:10DAD000FD6746F8E914C4433CF8E45C532BECC3FF
+:10DAE000DA189CF1F671F7A9E314B426E13B45CBB3
+:10DAF0009A9CF8AECE243F9337948BF89520FFCDB7
+:10DB0000268433D5CCE17B26690E123C4ED3D41447
+:10DB1000F6BEC9328A6A787764E1A4C0513CDF9BC3
+:10DB20009E51D206E7EB5A7FCE831DA6B51F0BA7E9
+:10DB3000B805E04C35D7946C29D6E1AF98C14DD7E4
+:10DB40005D6D277F13DE7B19189A9A0F767565B67F
+:10DB50006488CB940DD558E05CEAE51C554E48AC82
+:10DB60007D6A25932B235BD4F72A6CFE12435C5FFE
+:10DB70009D7F65E7B22F41BD86210B817388DB8EC7
+:10DB800097E33BFDF1F8BF01CEBBEBF476031FC674
+:10DB900073E60D70DE7D06F4F75301CE37423FE0A9
+:10DBA0001FC0BD0EB09B52DB62AFB716576EB8EE0A
+:10DBB00026CA0CFD7786AF48FF1E2C9F685E91FE3B
+:10DBC0008CF7F8C6F6A7DEE7D3F0CEAB781762C3C2
+:10DBD000F9AA469714DF261D3DAD52E98B4A3F7CDA
+:10DBE000D7F7C2F2E25EFD7B0584EC60E73A78BAD3
+:10DBF0008E604F0E39F07DE0329EC9C7B2A16451EC
+:10DC0000E1C6D285B6AE03C94DF83ED1C80A2EE6AC
+:10DC1000EF0F9CD7E052EDA7F4BAA079830E3E8DAA
+:10DC2000FE23FD0F7D41E38F75C8B77B197C606FC4
+:10DC3000C03CFCE169FA73201AFCB753D981E7496B
+:10DC4000DB54FCDFE10AF57211BC8DC57FD604EB15
+:10DC5000998BE5654327059867431C3EFD650E3BA0
+:10DC600027927E3E9C08E703966633FD35D03FC37E
+:10DC70007E1BF0C53213E124366FB033CB34F94A42
+:10DC8000DEFB590595AFE9A3792A5F2558875179BD
+:10DC90001BB6D922F57F9AF3DEF276AA3F3C567680
+:10DCA0001F8CDA8F36A2BB8768CD61F1DBD9C1D872
+:10DCB000FBD6C3390906B9F5547325799BCE6F6538
+:10DCC00036D3E7B387157C2749E3EB68B95498C38B
+:10DCD000D6D197C3ECF18F5F2E7113C8A515AA5C3E
+:10DCE00062E5C4136880F234937A2F4164EBBEF18D
+:10DCF00047330A210EB7D56B96E09EC34ACE9FF3F9
+:10DD00002D3A4EAD4DEA489022F4514B6C920BF0F7
+:10DD10004D47807BAF35CBEC98873FB03BFEBD874E
+:10DD200063F447A4A4DA71EC5A0D9EAD5E01C7DB23
+:10DD3000B8AB3029A887930F3C8BF13DA70AA72DDC
+:10DD40004A5FF1C67C5A5AB8D164D695BB98FEEAB0
+:10DD5000F6CAE539605FAAE79BA2EDA27BB23983E0
+:10DD60001CD6ECA2DF79199F50FE45FF319DFA8F3A
+:10DD700004EE7BF407F03C183C605488F775D9FB3F
+:10DD8000C66F1D2773C14FD2FAB92BA7D8D06FDD4C
+:10DD90006ABA489FA4CC69AB942FEBE4D919F57DFE
+:10DDA0007A4A0F33815F57E710633B73201BEE9570
+:10DDB0009374AB1FE4CD29217018D757246E58DF18
+:10DDC00085E62D87912ECCC4DD86E7A48E60FBEA24
+:10DDD000BA9152B4533F308741EFFC3C3703E339EB
+:10DDE000A94E46B7A7EC4DD88E275232CA1155EE30
+:10DDF000FD3C770ABE7FA1C9CFC87D16AD1F567EF8
+:10DE00008A5B910DEFC49E4A9D5CD2C619ED1DB090
+:10DE10007F22F6D2F3FB6EA7FC38ABBA3F4C61A66B
+:10DE200052E5A5E58FD2FA5B7298FE3BE50B0CC07C
+:10DE3000B8A7DC4404F8670F079F85FC62AF13DFC7
+:10DE400071D3D623CDC47E1F264DFDFD15E01348AA
+:10DE5000C55CC66F8773D93ABEA3E6D31263FF9E33
+:10DE6000CC7FA8F57AE0FE1FADD75D1EFBDEE81E75
+:10DE7000958F1B6D3DD570955E77CF13EF2DF38495
+:10DE8000DA55B4CADE1CD60FD56788AFCACE3AFCC5
+:10DE90003DB1F78756E1BBAEA3BFF301EF54D17597
+:10DEA0000F9395FB01EFC22FCC787EB3C3C2E8522B
+:10DEB000700745B88794E28CEDEF7E578527C5CC77
+:10DEC000DEEBD6EE2F58D4FBFCC7547B2CD15B8BFA
+:10DED000721DDE58937CF02EDB08DECFD5D631FAEA
+:10DEE0003CAE45BDC77FF3F643491CFBA1D4603F60
+:10DEF00068E346DB1117E13D6E5DBC7B9DF7DC42BC
+:10DF0000A2ABFF6932DC01FD7D7A5B96212E11CF39
+:10DF1000FEF8912A6FC15E5062C22518BE5FA47ED2
+:10DF2000A0A21FFF0A1B3F32AE9328BA71F7E6C8C2
+:10DF30003FCEC1F8CD5C11DFB1B0133C0F5BA6BE84
+:10DF40005F47F513BE5748F55235C86FCD2F02BE57
+:10DF5000179380AFCBCFE6A4EAF4A4DA2E5A1EDDE5
+:10DF6000A1DA0177A8FA26E9BC66373A248E8BE855
+:10DF70009DB17A8B53EDE868F918AD178C7635A50D
+:10DF80005B456F078CE11715AF374F1F93E2D0C782
+:10DF90002D7F11FBB26C6ED03C0DE4663547601FDF
+:10DFA00064569551DF3B7299DFE1C8751ACEE1D610
+:10DFB000D419EB25423DE0AB5CE70DF9297A7DC42D
+:10DFC0009941EEB1FE36ABF4E07BF7AC00EF372EB3
+:10DFD000C965F650499E9C9A4BD3237FA8EC83DFFA
+:10DFE000A11869E549AF07DAC97DC31E98974D04AA
+:10DFF0003FB57C6D55D1115A6EF9A905DF9D2427D7
+:10E0000062FBF7AE664EBE8FF273BE2AE71A3C6C17
+:10E010005E0D9EB05040E1C86C60F064F70F72BCBA
+:10E020004EEE65D7B37AC5B91683FEF1439EC2772B
+:10E030006BAE16BF0CB5C2EFA164D7CB3CE8BBCC2E
+:10E040007E8EA8EF6EE27BA9997ED6BFCB1FE2EE53
+:10E050002D8ECCBBCBB4A218F445579AD30FFAE25D
+:10E060007379C1329877C3857018D036EBC2100F20
+:10E0700076DFFE3C79167CD7E62799C54CD81F770A
+:10E080005E60F0F544D13F21BBD575E965F0B9027A
+:10E0900025004F5AA284EF10D1BF7CD0AB69C9AA2A
+:10E0A000DE482341782F88D8683DB0831CB49EFE9B
+:10E0B000DE260994C23E412875DA74D0730B1DFE2A
+:10E0C0009336D0AFD37DD3E15DA1170EC78EA7D70E
+:10E0D000AA7A87C27FA71EFE78FC31FADEBA5ACF31
+:10E0E00012C78FD6E8DE591DDB5EA59A00CBCBD7D1
+:10E0F0007AEE86F934B40BF81B5D1ADEF7E70536C5
+:10E10000E6A6C23A1DE1805F33FBCB91AE32159E8D
+:10E11000805DD1EEC80DC13BB2EDC99F4A07FCC777
+:10E1200083BBA1D92CDFA7E7E77601D7E348D4F971
+:10E1300035CDCF782C97E9A3D37981AD30FEE613A6
+:10E1400007F09CE083472F09E3BDEB73A378E3EA74
+:10E1500099FFD2B086BD9751BE96473ADCD42EE0E7
+:10E16000BBEA0DCF1E0FE37EF17682FBA00DFDC74B
+:10E170004FC33BAD590DF24CFDEF126435B077E360
+:10E18000D212467F1F5400BD9DD9BFA201E95A2477
+:10E1900022413A0AA2DD956D63F6A886DFD34238A4
+:10E1A00017E267A74DC4DF46CBAF59942289E6AF8B
+:10E1B000F91C7E787FE1EF8FBF213D067886B81885
+:10E1C000BC7B9017FC12E0A3BB959D27EF5E48ED4A
+:10E1D0001E5A6FA1936C85FCC2361701FEB8513CE4
+:10E1E000CC8AA28B59DB199FFC283751E55782EF67
+:10E1F000291DCF4D50EDA8601DDAAF741E9D731020
+:10E200002E9C87982B7F15E9564CC671331BC29CF8
+:10E21000FEFE899646E84A7E3637F566E0ECC77D15
+:10E22000C64DAA9C295F7B947B5B47072FE69A919A
+:10E230006E329F3DC2817F48CB5B177AB03EC607E6
+:10E24000339F657ED3265A7EBF41AE6CC0F97439C8
+:10E2500098FD48E5CA4980EB94690BBEEF776A3AAE
+:10E26000C17766EFB8103E8DE25985F794C0D6931A
+:10E27000A77868A5F99FE54A38FE6921781FACFBAD
+:10E28000E94C76BFBBCBB403DF3BD5F83E9A4F7F5A
+:10E2900096CBFCC9CC3547398827789CCC9ED4E0F6
+:10E2A000D3EA95E4559C05FCCEAA1E423C34AEE16F
+:10E2B000D97D0D159E8542A000FCB461B5BF93AB1E
+:10E2C000BF6D3E44E16B2CE6909E9FFCBB57912EA8
+:10E2D0001B7B38F6BB413DAF0AAB74FED5C1EFBD29
+:10E2E0008A7A65E9008B1F340E1CE7EF7581BE3911
+:10E2F00089F4D948E9CF5E0AEBC6ECD86B96702E4C
+:10E30000E8CB68FA745633B90831D742F60E1CEEE2
+:10E31000FF86D6DAD0EED7E4AFA8C209EF08827C38
+:10E32000FD8DCAEF5AFF117FD5EE07FAF6BD3BFD12
+:10E3300024BCEBD6E8E7FC701EF93F46F50993D7FD
+:10E340005222FC7660A4FF68FCE5E631F91A438F9F
+:10E350007C184B8F687AD6F77405BE97ACAD1FAFAB
+:10E36000E27D54BFE7B1FB578979BC0A8FEC853851
+:10E37000B644F9B9BB14DEF50B144B809F54A71FAC
+:10E38000E23B7FEF7E5DDAA0C3D76981F23BCD9F90
+:10E39000CE77203C942F92F274EBD750CC7E67EA74
+:10E3A000C9EFAE40BC36C0DA51BC3604EFBB0FF14A
+:10E3B000EC25E231902F4126BF1AD6DCC5DE05D709
+:10E3C000F4DF731CE2BF4171E13BD74BFB57207D6B
+:10E3D000128FDD5FC8A15CC375D6F84CCCD5F61D95
+:10E3E000D8BB43D4AF6F857889E6D727D605940488
+:10E3F000692C9FA6A87EFD4CD5AFB7CCB6FD59FDC4
+:10E40000FA4DCD3F41FFE721EF8F30D5F884FA8DEB
+:10E41000067EBA2D8FD92D929A56E431BEDC54DA9D
+:10E420008FF4BFE97213F28FAB9AC911D705A3FC21
+:10E43000D3E260D4836374E8EC5F04FB110BBFC2CA
+:10E44000892007E2C1FD19AEE967705E851C67E7A8
+:10E4500028167CF0F344FD3BA435798CBEAFF599CA
+:10E460004918F0CD3709E3D9BFF1FACB0957CDF9F7
+:10E4700027BA7EFFD29784E782AE3DBBF2F3905776
+:10E480008E26E139929C702DD2C535CF1C3FD081AC
+:10E49000A78DE1E95A7F25D2CFBBE99209DE096B4E
+:10E4A000ED7F623EFC5E74BD0AD7BBDF3537031ECD
+:10E4B000767CED3BF3E15DC94D212E05EE9B5DEBD6
+:10E4C000FBCA1F41EFD51F7D18CF7DB57DF37FA11E
+:10E4D000DD6D0A1D61DFFB9244A877F59903F30116
+:10E4E000BF6DFD6D58FEEE3347307FF26BDF311F9D
+:10E4F0002A8DD0F1BBDF3DF2C3DF433E9088F77237
+:10E500001A824F3E0E79529BC8EE5D055F11F4BF33
+:10E51000DF75F0F820F2A146174BFB39F5DD30012D
+:10E52000CF7968F4FB56457119F01DA550BF793EAF
+:10E53000CD7727D4C78A23EE51E7DB00B408E3AEDA
+:10E54000E142C0075D82D287F25CECCF0579EE2C08
+:10E550000E0BF02EE9EABAE3F3D9CF10B662F94A0E
+:10E560001B3B2F368DF20BBC1F457B3BFA21C4F7BA
+:10E57000BA1E5C07FD1D3613D19C118177B320A113
+:10E580007FB4B986F3530E231CD9762A15F6C79AA1
+:10E59000897AAE8BD5EBA2EEA52D19F510B1D3B4C7
+:10E5A0006C5BEC38E893792E953E19BF660EACC8CB
+:10E5B00006F9413C567FA12FD25FCEF9A66E78DED8
+:10E5C0003FB37E6811CC6349D18619300F0FC4FB6D
+:10E5D00040BF282EECBF11E293949FBEAACAC73455
+:10E5E0003180EF8CD8E4402AFC269B640DE0396E24
+:10E5F000697DC0D20A72861FC95D858AF09861FF65
+:10E60000F0A025983113FAEB52F5D351063F6D8FE8
+:10E61000FD4995B207DAD3FEB13F5B9DCCE36FBEF7
+:10E62000D9D83AFCEB0F6E3F668C9787C6F45FEA49
+:10E6300002FDA2ACC17593049CEFBB5015F1ADDC9B
+:10E64000AA8F6347C77B409EC17EEFE9BCF2C1BC85
+:10E65000D448AAC581A2F1CC4BB49CF65321C998E9
+:10E6600092BE1BBB77A6C9EDCD7B54BDFBE22594C2
+:10E670003B9B833CD3BBC1CBA877FFA545266F53FB
+:10E68000C3F2E0F39790BEEF3DC1F4EEE61325022E
+:10E69000D0B3F61EF2E68A6BA87F153341BADE2CA2
+:10E6A000F49FF642FFDDC44D2D7BB279FEF02D20A4
+:10E6B000FF7EFDBC7D0DB43F653221BD9DEAFDC4EA
+:10E6C00091364E0F1FF303B8FA10F2E366D52E28E9
+:10E6D0005F7BDF01F0C71AEBD9EF116C1E50F98B8D
+:10E6E000FA6380DFCD275E45FAD1EC5EDFD3354893
+:10E6F0006F6E4A6FF8BB095543081FFDF317D2D45C
+:10E700005DC5DEC55D52545206F47672F50F778210
+:10E71000DEDE5C4544E8FF608EFC3CBEFFFB3C87D0
+:10E72000EF511EB4F454C03DC9830B2511F8637337
+:10E73000B076543FE1F9EA60ED00F28F679D1FEC7F
+:10E7400087EED620DAD5DD194EB40B0E3EDF8AFAFD
+:10E7500073B3E4F0C3EF992C3DC16DC5F68A8B30DD
+:10E76000F839B4F397866EC3735B1A3E96560DE77D
+:10E770003279C1E0FEB565E8D330EF5F7FCF0A6F35
+:10E780007E8FD2DFFF05D640AE560080000000002D
+:10E790001F8B080000000000000BDD7D0B7854D5B6
+:10E7A000B5F03A73CE3C1226939327E1E9C90308EA
+:10E7B00098841308EF872704102BB583F2B2220E3A
+:10E7C000C823424846C48AD77E37830331526F6FCD
+:10E7D000AC2FEAA576A06AD12B106DAC51030DA821
+:10E7E00014ABB5D1528A16BDA3222F918CE083DEE3
+:10E7F000D2F2AFB5F639C9CC640262EDFFF9FFE998
+:10E800005737FBECF7DAEBBDD7DE9336D9BFF18E85
+:10E8100032802BD561BAAC03A42B6DBE3B3201D242
+:10E8200000F435986FB07B9D3A9647FE430A6DCE53
+:10E83000C5EFD3C0081501E4DF23192137408A262C
+:10E840000164516A335307C008C0BF0691AA811200
+:10E850006F31C027B5067C3800F84FCB0658CEFF85
+:10E860000058B1A8D5A1617F554F89FE329D46E978
+:10E870002D989EA3BFCB305F013778B13C4B966E8D
+:10E8800098C1A98D53ABDC4A8799F3C87D64E1BD7B
+:10E890005370FEDFA9043D0987E85D88DF310F7EF4
+:10E8A000080DC0F9F7AEF4F6D5A83C73A92E633E67
+:10E8B0002B03BE4FE591350ED82C75ED7724AD6B4B
+:10E8C00004D5F39649582FAB678A1EA4A1E4725B66
+:10E8D00012B52B95F4CD1AE5AF7E14084E59BD74D0
+:10E8E000EA072064C2C15B66C37A47B353F4F5F408
+:10E8F0003DF407E56A84C7244DB5CA4BA99DE601DE
+:10E90000585FDAD96E4ABE97FB9BD233490FE23C7F
+:10E91000A737044A204FC0C1EBEE8443684DF2DCB8
+:10E9200050143CC6131CB07D6830CC6D2C22F87B93
+:10E93000ABA89F6C9B9EB11E3715DC81926B526811
+:10E940009C20C36B00CD03D329B83E3FF59BEF5D00
+:10E95000C5F0C84AD113C163CF25021EBBE76C9333
+:10E960003760BDEA2229E4C4F9DDFFE28C525A6720
+:10E97000F54CB70E98AFF6290B695C08B8E031CCBE
+:10E98000836FD1BD53305F5DE9D5D76BBCEE455485
+:10E99000DE3733495F8FE50F3E2F1994AF0EB84332
+:10E9A0004998BFB259E04375F3D3CA8D98F620BC9D
+:10E9B0007353BB40C98CE2CEF900ACE1F9544F3A35
+:10E9C000D1FF656C1F9041972762DE111EA8E3FA04
+:10E9D000AB27860712BC4E3E9F3497DABF62B30561
+:10E9E000689C57365FBA292875EDE7A4DDDB44EB58
+:10E9F0003F89EB0F60F96F9FFF7388E8612DD28329
+:10EA00009C837BB4462BA7F2F55340A57DB1F66BF2
+:10EA10008F23504878B5272F99F183E6E945381FB1
+:10EA2000A77FF602B8F5126F8D8670AEB6B5D629FF
+:10EA3000D46E4B06C018CCBF70F7409FBB2B9CB167
+:10EA40003DEF8B4B01C65F57A847281885572E17F7
+:10EA5000D2DA304E036E4C7BAC16F089EFE74ECD28
+:10EA6000CDFDAC7085F7E0CE41CDEA065736E29198
+:10EA70002F59E3EF49F680D107E7E3682E6FED8366
+:10EA8000E5D9E9F81FDAB7CD3D42B46FD9D9E07BBB
+:10EA90002641BFAB4C3CB3F6A5211D182FB33DA2B8
+:10EAA000FECF4DBAF98949975BCC348A2E62F1DEEC
+:10EAB000EDCB253E919D0CBEC604E359ED717E5C05
+:10EAC0006ECD0B5CD84F26B5D36C8CDF717417CA32
+:10EAD0002A1E4674372559DFED227A1A963B2C08F8
+:10EAE0009DE320247267A474C5035A07D10FAD8B30
+:10EAF000E8ACBB7A0DBB047F8AC7CB674C3AA9222E
+:10EB00005CC7796F93901E13EEB3E8A7DE966B7B1C
+:10EB100010E7FBA3FD32F3D9F87A56BAAB16A0750D
+:10EB20001040DEC66B53BDC5DDD7DB66D6FB71ADCD
+:10EB30008B53B7AEAD51B0FFA12D5AA90C349E3600
+:10EB400089C60BE078B4CF2913E15319E1E319DD4D
+:10EB50005078672EE179E35C5AD750256C2B25BE9F
+:10EB6000EBB5416BA1E0DFE7F0FF3DE72643ABAB40
+:10EB700033DFCB971E93EF53D93BA67E3F7F5E4C8E
+:10EB8000F925AB87C494E70686C5E4F3EBC7C6D482
+:10EB90001FD03029263F68C37762EA0F0E5D1D93B0
+:10EBA000BF74CBF763EA17372E8C299FF48FFCDDF7
+:10EBB0003F253CA7F527E073561AD17279FF8636B8
+:10EBC000C7AE3F7574ECFA158800D1FBA4E4BFEA28
+:10EBD00089E8D94A5341F92C6CB5233EE0D26C0F39
+:10EBE000E23CCAFF2C87D627988785CF567E922293
+:10EBF000C78C6BF1890BE1579EEFFCF8F263C217EB
+:10EC0000E779E6FD0F39215DAAB9820F28E0E5F525
+:10EC1000A74E9C7BDEF5DBE3D70F1AE3BD87D69FBB
+:10EC200000EFE3D79F3A3A761FACF5E7F90637874E
+:10EC3000B19FCFE74A2C5FF651D198AEFDBD1BB70F
+:10EC4000CED9AB52599F01EF3509EB77CEE34E9EFB
+:10EC5000C7F54EF02782C374130E95B982DE2F4498
+:10EC60009FEF9BF3F81FA24F4CDD6B73991E619FC2
+:10EC70001C1A805D2DAC9776F544BC48F7B9592F26
+:10EC80005BA8B44269949CBFDFA4EF074DFADE5045
+:10EC9000AB723F0FD7E670BAB156E3EF8FD416725E
+:10ECA0001AAAD5F9FBE6DAD19C3E8AFA18A58FD7C5
+:10ECB0004EE3744BAD97EB3D593B97D3A76A7DFC70
+:10ECC000DDDA9FEBCDFD016F06CBB3F8F5CC5F9598
+:10ECD000182F412EE2F6F391CEE4F3F0B52EEDE5D8
+:10ECE00079A9E7C3A3D50773B7BF1C8507D7E5A6E6
+:10ECF000641EEE81FF1805A3CEC9176EFF65ADB681
+:10ED0000FD65FB85E9C2C21738FBE18044F5AEA77B
+:10ED100031C722BFC9DDDC1070770F9F4E3C8AC31C
+:10ED2000572FE22B7E2D21D9DE8BCAC3BDA3C7F995
+:10ED300093B9CF567EE64C81AFF1FDDE6FE2DF2C5A
+:10ED4000C24F2C9F1D47AFA77385FC3C9D2BF4F44D
+:10ED5000FDDDF08B7B726DA6FC14FB3E6B9FE04BE0
+:10ED600077F6983FC197605C294F8BA1CFD9336369
+:10ED7000F771BF5DF0B7FD7F92436B12ECFF85DA50
+:10ED80005BEB896FF72773BD9FFE7F466FFBAF4D2F
+:10ED9000617D7EBFDDD72F2B6A7FF65FDB636EA2BE
+:10EDA0007DFFDF5CBBD8AF421548BE433A18A407CD
+:10EDB000E192020ED2E5A0403D4C7482C610D145CE
+:10EDC000F778A9C0618B9E64826712EBE39FCF4CFA
+:10EDD000E1FD079F6A4054FFA0A8AC976EFB2EEAA6
+:10EDE0000A349E82E3A11E0ABAAD73FFF2E8BFC9DE
+:10EDF0009DFC5AEE9EDE2E8407161F994D7CE43C46
+:10EE0000F2BA6BBB8BE32387888F5CFACDF3118B4F
+:10EE10008EE1EC8D03BC295DCB67111FE90DF0D3AA
+:10EE2000DCB7998F7C6D3859746BEA13F1FCA4DB65
+:10EE300076CD9917907F263F57FCF561C48BDBE4B4
+:10EE40009486F5D8E42EC5FF73CA07020A3C86A94A
+:10EE500073F5E9DE878673B7850AD71BC2F69D5323
+:10EE6000F1FF32CCF6A053A57A0FF5F8F7ED945FD9
+:10EE70008D1CD389E99749FD4380B640699EE03FE8
+:10EE8000B2EB4CEF4351F3B3ABD0273A5FDAEAEA87
+:10EE900073286ADF86EF5563F223DA7262EA8F3AEB
+:10EEA000A0C5948F0917C6948F3BAAC7E427444690
+:10EEB000C7D4BFEC8C11932F872B62EA57B866C476
+:10EEC000E4A7A8D7C6D4BF3C67414CF915DA4DB1C9
+:10EED000FD157887E7E1BA173ADCF5522ADA69B905
+:10EEE0004619E59393ABFD0BC84E5AE3516122D509
+:10EEF0000E85086E750E97BA1EF9D40792D11F10B1
+:10EF00004FEFB3A1D59D8FF5E530507AD0A697523B
+:10EF10009A676CF1119D6E2F4CD6681F920702B450
+:10EF2000919C52F424407EE2E811F95D01EDCB6F33
+:10EF30006CF01826DB5554F4A97E736688ECDFACC0
+:10EF400064DF15348FF5B606CF1ADA671B781FCB4E
+:10EF500064BCFAC968CC1F7E41B1119E6D6FB1DDF2
+:10EF60003316F39F61F7329637B59DF8C995981F10
+:10EF7000DA66D7A9F65090D94E5CAEC03D4A7AF712
+:10EF800078F6F10F843D15FFFD677982DF6755083C
+:10EF90003B33BEFC8E3C21DF3E76242E5F6EB6AF47
+:10EFA000B86BFA43C4D7EC6D7620BFC5AA2CA32753
+:10EFB0009C4F5F3D930FA1E15179C50BAA9BBE0FFA
+:10EFC000E4EF1577CD83B05BF4437EAC5549464FF3
+:10EFD000F23B7C3C29F13C6E31E7613FD3A39B7E41
+:10EFE0003DFCFDE3BCF3AFD37E2609421989DABBB1
+:10EFF000F97B563071FB7BCCF13F4E4F5C5EDFD12D
+:10F000007F2F086444B7137CA7739CBE5C6E3F934C
+:10F01000068184EBC8E4EF9063E410DEEC423A270B
+:10F020007E519E96ED0024F1F91079C540F8CF206D
+:10F030009300F1145C7A29F12950EC91B04517281E
+:10F040003F1680F201D90B3644C67338B51B56DB28
+:10F050003F0847D1D10C23360F543F4ADE7C427D16
+:10F06000E37A928714A612BE9F022D554D805F56FB
+:10F070003ACF257B95A8F51CEC464F6A33E178B072
+:10F080005762383E6FF2B191F320A1BED696E711D8
+:10F090007659A1DEF37C7283E0EBCB88EE377E1FDE
+:10F0A00032B9FCABC219F182E57AE4BBEE10FB2960
+:10F0B000BF71785BF8DD27062F3EC98F9F777F2EC3
+:10F0C0002FE8EB7D2B8FE58A3690E4629349BF4DA4
+:10F0D0008AD163989BF8185426827F9F7C534F8D6A
+:10F0E0005B771318390BC8AFA1D875E267C932F83E
+:10F0F0009F4E00FFF875A79AF3C6F6735BA93D789B
+:10F1000074C1E7C0EBCA463D9FFE854B280FBC6922
+:10F11000A7FEE7F93DFA7A54813ECF13FAF40208CC
+:10F12000DB890F77819F3BD34E7EDB78387A419B1A
+:10F130002FE55F189EE905C6E7041F9B4BCDDE8ACD
+:10F14000EB9C1FF000F9696E98079E629C8FEFBBE5
+:10F15000E96F185877E155434AD6527AE9F83A9957
+:10F160005B4F66BD4F0AF491CF5DFAD5F5BE3A8F7D
+:10F17000AF90E8E390A42D61384808079237BD8F1F
+:10F180000F5C1005C715FDCA7F9F9F45E7036064AC
+:10F1900090BF788793FD56B001580FADD9397813D9
+:10F1A000C9852FF27DAF51BD51934DFFAD11197837
+:10F1B00075CAC5C30BFFEC44271782976CD2FB417D
+:10F1C0004F62BC19972FF6EBABD24B66BE8043045F
+:10F1D000E1B0B9EC9BA717845F0CFF782D5FF05F5F
+:10F1E0002BB5E0366A5AAC7FF735731DAFE57B3837
+:10F1F000FD22DFCB706EEFF7E9E12492FF0E5C7F1A
+:10F2000002BCF7764337DDADBF3B7AF9A6F8F2C111
+:10F21000E4C4F35CFC2D99E71B344FE2F32589E746
+:10F22000F96F17894FB83F4B5CF9DFFC3CBFC8371B
+:10F23000DEC8A779A6279EE74F2F129EC8EC96B48A
+:10F2400062BDD9C807A9DE373D5F082C984272E835
+:10F250001A9FF0FF1723C7253E845379F4DC70D240
+:10F260006FF5751B88EFACF4E80195F9C81BF982BE
+:10F270000F8281F399394D627F52FB884F97288422
+:10F28000EFD9D09A46FC6AA793FDD9F1EB0F99EB21
+:10F29000473A799CE004D32303899F1C1C98984F1C
+:10F2A0003C1E5FBF3EC2F2697D7962FD749B49AF2F
+:10F2B0002B5C0DD3B26DD1E72BB84099B86CC0E888
+:10F2C00043F2B64C5D4BFCC4817289E0EAE833A49A
+:10F2D00027ED07E6BD12F981735E3F207918DE271E
+:10F2E0003AE097D739CEF1DABD6A81BD7B7EBE5C4C
+:10F2F0007E66A43FC17AB66ABE5DF95176E3F22D0F
+:10F30000AFAA05D1FE7108DB800547C4E6E5F341ED
+:10F31000D36FD0132ECA6F509C29E865453F2FCB81
+:10F3200007921B643FD7BD30A6943617F50F20FB1C
+:10F33000209292CCF222D87B6CA11605CF0FF32D30
+:10F34000FD53EE46AF74C47C7FB7D685266567FE55
+:10F35000FAA3FBA6903E3F1FC2EBA8FEFC553DE87A
+:10F3600008B2639D1DFD9D9162F4DBCEFE15FE5E2D
+:10F37000EE72B7CA433175FF2EE17E6CD58CA304C3
+:10F38000CFB5FD8C63B4CE78F805EE1A9FC67E0427
+:10F3900082DF655DF7BDBB7DFEAB669CA6FE5EE8C9
+:10F3A000A75A7E1D9DCFE392ADF361453DECEA8403
+:10F3B000F757DD9764D3BF88FAC4399AB701557EF1
+:10F3C0009ACF3C8BBEE3F41C2814FE803A4FDBBA84
+:10F3D0005D517478832D9225E476781D3999FE6706
+:10F3E0004712F38FF61DBFEDE7E3F3344BEFE8214F
+:10F3F0009FEBF1D5E767F917ECC989F569EB1C6359
+:10F40000B7BDA880F5123AE71D8D79495B44F6AA8D
+:10F41000A2821EC4F5955F8ED884FD4D92FBB68402
+:10F42000711D9FC3D9E40998FE2788F5AF7AF3A32D
+:10F4300074F2634E52ECC7A3F953BC1F684041AC51
+:10F440003FF914CC4B6D25B88C4F67B86C6F99940D
+:10F450004AFD943C3FB927A5BB6AEB55C5DEE90FD1
+:10F460008A9F7F793776E9B002A177BE9E6C0C2B1C
+:10F47000C0B4BC9BF58F32EB85938D5105599DFD32
+:10F4800051FD44F1106D832C3FAE80EB358105AC0E
+:10F490006FD95CC857897FA2FE2AABE4272CB03312
+:10F4A000BD1BA0A9D9EC3714FB8F7C5DC1FC0433D4
+:10F4B0002FD5BF1DA4761B6FF1F03938F83420F931
+:10F4C0008080E173813AC9CF7E0717C57D60BA5E3F
+:10F4D000D237902E26DB2219822E4222AE017C0AE0
+:10F4E000E57F2B85831427B0D6F5EF3F273FB81172
+:10F4F00054206922E615603F63E0600A9FCBF1CC9F
+:10F50000701E4E6B5E663EC5CCB7CF9A3A6D00A6B4
+:10F51000B7253FE2213C0D4BC847B19F2F93FFBD5C
+:10F5200095E9C69FACDB7B937FE93DCE4B2B937572
+:10F530002987FC4F9E42D2535743B2EEC4710C77D9
+:10F540007180C67568C0FEF86468E475B8DD9F0414
+:10F5500008282AA812DB4FC9BE65056CAF009F932F
+:10F560001F7E2F6533AD3F493DD57A077ECA0083A4
+:10F57000EB65C4C9C72CF72A89E337BC4A9C5CF405
+:10F580004904FF9E73E3BFC7CA4B171C54899F48A9
+:10F59000ADDE9C73C89FDA086E659D706B53845D09
+:10F5A00067C12D30C9FF4B826BE04EA71ACCECDE51
+:10F5B000DF86001A45FA789BBA642BD547C3096CDD
+:10F5C000D45F8E585FA0D229F641F16DA5F6EFD831
+:10F5D0007354B27B2C3C7B68A0C9AFBBF1773C5025
+:10F5E00020F4A3EAF4C3D524E70007B5F50738995A
+:10F5F000727424F10D9497F5242F93EC06C3DB92DB
+:10F600009B2B9AD600D15575F30220BEF28EE41BD7
+:10F61000F032DB23C076D99C6981576C1AF9B26647
+:10F62000AE7363FA49411EE3D7FE57A6BEC26C48CB
+:10F63000761753BBD2CBBC53B270DC6031E8776233
+:10F64000BD60926FEBB3B4AE3765FD318DE2212A18
+:10F65000E0C3E12632E1F74DB333D86F9A5911A9CF
+:10F66000A37881C8DDA0527C4F17FA388BEB1B09B9
+:10F67000F00B1E0BFB59A4B612FEF4427C93D4CEC1
+:10F68000F247A93C5FE42FC37C8DD852C86F29FF95
+:10F69000DE0882479B0C141655D322D968FCFC99CE
+:10F6A000C359AF29A0F2CCE8F2B4E54F61BE60EED9
+:10F6B000049DC849B3F97E762B95BF01BC0E30F985
+:10F6C000F7A838FA1DD749375C5EDA91F757D07C36
+:10F6D0005FB919D88EAD31E56D0CBDD162B1CC18D2
+:10F6E00049F8D7D10F503F15667E9CA2723F7DFD31
+:10F6F00060F205EFC607F89CC0A6937FB24E6A6021
+:10F70000F840C0CFFA1EC5CD10BDF49FB76BB79DB2
+:10F7100006CB1474A7EF157457065E99E03552BDF9
+:10F720003B48E3CF9997CB7C66CC5160B830E5611C
+:10F730007E429AC4FB943F209FF165BC4BAF97116A
+:10F740008F64B9343F09C79B3B4FE2F38959735D1E
+:10F750002109FF390BE983E3A1145FEE6CC4F7398B
+:10F760003E499CFB627E5E943F1EB5613E379BED39
+:10F7700004FFD309F0397F80C077AB7DCD5A478C29
+:10F780007FE792016EE1E71830F59302E6BF22AE03
+:10F79000252BD91B117CA381F9D4611BEADFA4FFBF
+:10F7A00082C1FAF63526BD5BFC6296710BDBC1B3F4
+:10F7B000BCB17AF43BB4274407D74AACE7CE997B77
+:10F7C0007E3DFB5C8164C6DDF455599E99DF35D0E2
+:10F7D000D89EBE9AF49C12FC380DF59028FD7EDE72
+:10F7E0006D67D3B87ECFC7579CBB0451A152F09729
+:10F7F0001A8427F1CBF26B15A697EAB50E8EFFAAF5
+:10F80000695E63CF267CFE21E8025FDFAFEB83F306
+:10F81000EC53658C90B528BF4D554822BACE269E34
+:10F82000C3F08F38C82F37DBA157D1BA66A7831A28
+:10F830004843BCBCF68A8DD4FF5A17A832CADBDE17
+:10F840002D6F8608AF9095EB849388391CD7D657D7
+:10F85000EDC1E70BF5B6611CB755EF49D1A3E3A4A1
+:10F86000D6AFE9C43B8AD7D29C304C35F737919D4F
+:10F87000346480E0570F4AC0F22270AD8BE19C9552
+:10F880002FE295B2527547308DF88D66D5E338BBBF
+:10F8900007EDBE5EC3310DA15A29F647B48BA7FB15
+:10F8A000AC0CB39F1E9A1444629CD9525A6623B87A
+:10F8B000B953748A4FB4FAAD4836ECC4B72A8648B7
+:10F8C00023820CCF4DCA22D24F9362F9BEDD2EF6B1
+:10F8D00005DE157C3F5E0EA21C60BE4F7EFB6019EC
+:10F8E000CBAF8A01592C0FB89FD58A4B75EAD0450A
+:10F8F0009E657A2185FC5CC31064A4AFB7E5786788
+:10F9000050FC5EE07585FD6A6573F5EB1647EDEB1F
+:10F91000E60E391099CFF1503FD4FB503CD4DAF2C7
+:10F92000CE3CC53D56428383F0BD324E3E2E73BF62
+:10F93000CC7AE4B247ED9DF80B1427AAE713FFA891
+:10F940007AAA8B3F88F954273F8BB32F417D89D604
+:10F950003302F931F121A3204566FF32CC13721432
+:10F960001E97C82F267B56D793DC6B97521AE4B2AA
+:10F970004E3E39C2DCAFBB14EF4B141F1B407DE978
+:10F980003115BACA01F0B3FE3211E526E9D152CBE6
+:10F990001C99C6DDB814FBA6F37C255C41F9DB9607
+:10F9A0008A735208DCCCE760E3024E95E8FFCBE4B3
+:10F9B000FE6BCD71FD7664D6C7D41F727F80FB428B
+:10F9C0007A8B44FC10CB7B4FC3A64807E35A8E705A
+:10F9D0007F1B33045DC4EB312FDBDC219B8DF86E84
+:10F9E00080E54E128472087E4681E0B36507049F6D
+:10F9F0007D2E801AB44CAAACFF9AE9B9AC0772F913
+:10FA0000D80870FCCC0EF0559BFACE5D034650B47E
+:10FA1000A85FF071535FB0F4B82971FB78B9FB7E31
+:10FA200085F8D6E5395DF64BA6FEA781C4FAE21546
+:10FA3000DAF9F99661F12588E54BB97096F70FEE82
+:10FA4000DE732BF90982717A50F022F5A05EB9BEFF
+:10FA50005FD0FAE2F5A1EEE2299F1A7071F194A845
+:10FA600041CC27F935D6B2B3E2F0A77ACFF1F9F756
+:10FA70004027DE75E07360D375B40E94E72AD97D14
+:10FA8000D26F1E62BA5E8BF5E4F104CD83C1FFC272
+:10FA90007CAB0DFC14AF003EF534E1A92577911342
+:10FAA000319ED42D1678374A11F9BEA8C8125E06C9
+:10FAB00047C7EBEBBE5CF2471B65C51C1F6BC9E378
+:10FAC000E13683F16404E81954CFC2939161518EF9
+:10FAD000F8F11AF19371D3105FF228CE76541FD249
+:10FAE000BBCA4163FC288F936B15EE990AD17985C7
+:10FAF0002B7EFF0D3E779C6CE2C714F5EBE1C7252A
+:10FB0000841F96DC423DF9AE38FBE2AE38FBE22BB7
+:10FB1000E0C7918BC18FC845E247BBFD87EF05CA9F
+:10FB2000D89EF5CBFDBBE287D472DB927B88DE8367
+:10FB30002940FBFE74925AE1C679D6548AB8F3E1A3
+:10FB4000BF2F08523E7B452EEB854FA7E92F71B999
+:10FB50005F9497B519720AE6F3576139E69FCEF5BF
+:10FB60005650BE66359663FD11FB7C41CA17FC50AA
+:10FB70009497DEE97F2985E47C40B47FE1589DECD1
+:10FB8000C1F2509DD9BEBCA182F235F5A2FDC803D9
+:10FB9000A120E507DF23C6B7F4CECB4CFEF9B47441
+:10FBA000EAA5DBA93FE49F9B917F8E3B61946EC3E6
+:10FBB000FC22D56623BC5D1C09D8091F0EDBAA46B2
+:10FBC00012FEC0425F0EE19993EC56B9937FD9C8FB
+:10FBD000A983ED262A76D6FB5E95FC0AD59B4624A2
+:10FBE000417276B4EE22FE4EF1C89B51DE1499F2BA
+:10FBF000C88ADFA57B0433A2F6AB68A090F356BD9C
+:10FC0000EC748117F0B0C00B2BBEB8F52190C8DFA3
+:10FC1000426B633F449778633FCBEF50BFE2618410
+:10FC2000B797539C31965F3E56C419979E3B3D351E
+:10FC3000915D347CA0B0E78F9AF722ACEF95A15C80
+:10FC40001BD1CFD3843CBD099EDA1F495F7A9AC687
+:10FC50001ACB200DC068DA47912F7FBCEF7DF57D70
+:10FC60000196DAFC0AE111F497749AFF556DFEC90A
+:10FC7000BC9E2A80EFF54AB00E53DE2F093A368B30
+:10FC80003811C17F6699FB764C9DF7CAED6C3F7BBE
+:10FC9000743B8E3369FC00A6FB9973258BEEBF3352
+:10FCA00090F4603AC1607FB68FE3DD6F8290830687
+:10FCB000B9298EEE97BB3F7B8FE4D2F22DB174BD94
+:10FCC000025A1DC2DF1C79E46DECBF72438A4AF20E
+:10FCD0006745636CBDCA0DBF3F209574E50395165B
+:10FCE0001F08C5F2015438041F7868089F7FADCC07
+:10FCF00091B54319E4FFF0B3BC4F0221EFEF52F48A
+:10FD000030D35F8B53D851A67E7E9B2CF4F32470A6
+:10FD100069EE42E2C336335E55E4ADF1212ECEE505
+:10FD200054C3CDCC6FAC78180420CBFB5381CBD51A
+:10FD3000683F5B079F8FA3F7D2969EAD74DFC0F23A
+:10FD4000B3A07EC0F6152C424E378EF910EF9BB44F
+:10FD50000CFF3F86D6E5E0753DD4A33FF3F7D548C9
+:10FD600010CE52B28B95E256EA7388A02717D111B4
+:10FD7000F1F769B1F65612083D7E789BF0E38CE806
+:10FD800094FB75B4BF4ED05D42EE3700D157B7F645
+:10FD90008A7B55427B852514F63F7B9AE0EB17B2B0
+:10FDA00057BAB3473AF63309F5364C67FA92B6D3E9
+:10FDB000BA2F3B9B9A92289E6A66B9EC25BB6CA62B
+:10FDC000DDC84A4FA0E73F60EAD91DF57D6EEE4FD2
+:10FDD000F1656CA7F825ECB795F87FDBEB8E8471A5
+:10FDE000C98AD9BF6237D444FD5F454EA9287FBB7D
+:10FDF000E2CBE67EBF017DE579DA977879E4D81D1C
+:10FE0000774E098181D171054F0F12FC6E4281F14D
+:10FE10009B81744E94D49FF99D568AF6541FCE73DD
+:10FE20007F076FBE9CE3243E03E38271126BA3FC49
+:10FE3000E707D3129F8BBC61F2D7148A7DC3F47697
+:10FE4000CDF8038D7FD421CE5D8E269BA9479C5B88
+:10FE5000BDD3515FF0C788C5276DA2FC687AEC79E5
+:10FE60008D55EF94D9EE50ADCBBB36CAFFAA3DE419
+:10FE7000F4939CCECA37EF71AC02B69FDB9F4FDB89
+:10FE800014BDAF670796A70CA2F8A27CC3D18BE084
+:10FE9000F8BC907FD54AD841FBFBF025BEA334EFD8
+:10FEA0006A0D8C67A81F2DECB8A698EC06111FD21E
+:10FEB0006E1776607B9248AD799D1D382365109D45
+:10FEC000CBDE1C66BED8919F1166BE7776A097C721
+:10FED0006D9F65959BF9FF10790D549DE65BEE32A1
+:10FEE000ED8742752DFB5D51EF23BF4DFCF901C03D
+:10FEF00078A11F9BF19E46DFBFF3395E777E7E9B24
+:10FF0000ABED95FFC2EFF34D7FB0AFF9D357EED015
+:10FF1000187F0ED3B80B4249C071DFFFA45FBFBD8D
+:10FF20005F1BAF677D79A4FFC3651C2FC07EB5152D
+:10FF30002DBF65BEBEC2A2FBA658BAEF65C2F14294
+:10FF4000E76AF1E72DDF009D0D1C9440EFFB35C9FA
+:10FF50006BC4AF29F274E66BA79A24F68768D05673
+:10FF600047705E29897D59F9EA8D150ECA2F0695CD
+:10FF7000F97C533C3FF305494F585E0F2CEF4A2163
+:10FF80003F95E05DB357261F02DFB7D1A2F824DD0D
+:10FF9000B7D1A2EC62BA6F139DA7FB36D1F5E9BECB
+:10FFA0004D7439DDB7892EA7FB36D179BA6F135D51
+:10FFB0009FEEDB44E7E9BE4D747DBA6F139DA7FB4E
+:10FFC00036D1F58F80FFC1F112C175E206826BD385
+:10FFD0001AA74A70C5ED7AAB289BC519E31FDDCB84
+:10FFE00089EE67B967AA6305C2614F8E0CD268BA01
+:10FFF00077B32CA6DFE57215FB0950ED6039E2C737
+:020000021000EC
+:10000000FF313CE522B6933F6F962003F175E986F8
+:1000100038FDA1E5DE3AD2B76F0AC57E5F0E517E8C
+:10002000F7DCAEE7404B0699F1C0BDA137E1F31410
+:10003000D9ADD33E9FDA27EB4E305D00B4CF5B8560
+:100040003FB214063D349EF7D10E218D8E4744F900
+:10005000A98D722890DB793E746AEFAF0EFBB0DE9B
+:10006000D25EB24A74E7CC89DDEF242D76BF7B14D3
+:10007000C6EE778A1EBBDFA9A363F73B1ECE694697
+:10008000ECFE833C9DE1BCBC0F9A77387EC6B45829
+:100090007CB0E03B1AFF27F05563F82E41F83E2C68
+:1000A000D1B9DA3D7BFA685DE15CDD7CAF83F4D7E2
+:1000B0008B85F37D7170FE1CC657B819B830D335E7
+:1000C000B2535F2ADBEBE72081636ADF0AF35EAF9E
+:1000D00038DF31E18AFA0BDB0B51E750F5B2CCFA8D
+:1000E000CC26A267233385F980BEA107EFD73097CE
+:1000F000E86F31F8983F2D8ED36B96BAEF77905E0C
+:1001000013BF4E9A0DF95D2A5B845E13BFDE2EFE8F
+:10011000A842B5B58FE0DB8D0FEBB4CC168B4FFB4F
+:10012000C88F91096D0ED263BAE38333728C5F93EB
+:10013000DC402E06040F610AF05F427DB2A6A35890
+:10014000F8E79D7EE1E787401ACF6314887970A3B2
+:10015000287FFF2825C47E073429D8BF64D963F1DE
+:10016000F084BED2DAB7B05FF92530E1A8CB92AD0A
+:10017000D37F8F56A041FAF5C8CF84FE34DAD51864
+:1001800054B4AEF6F927F9E639B762C67F5EE01CD3
+:1001900092E64F7E8E6BCCF8BB092DA35EA17CC787
+:1001A000B9E4CE57FBD07E8DDFF9FB0C4ADF92B469
+:1001B000C7EEC0F1AF96045EC4DB95C11DE334DA2F
+:1001C000FFCB242FFB2BA682BFAFB047423CAF89A9
+:1001D0002E1FEBB5369761E7F328D37F09109E4AAF
+:1001E0007AFA32DDC1F358AB7E3095FC31CBC1F4E5
+:1001F000C734C7EE5F177B28CE0EAAC2FDA77EE3E9
+:10020000ED9E047814170F102BEF17145AF7CA45F8
+:10021000BC8A06E2FE77A5E947AA746DF4887338B4
+:1002200094737DA18BDDA410E0C7F07985BD90EDBE
+:1002300062B407F8BC5F73248AD7033593CFD56FB8
+:1002400074CF64BE7C637D17BF0EE3F5E2860BAC12
+:10025000CBD413C6D3379CFFE1419A90FBC9D3F7A7
+:100260001A545CD6D63F5A9FAD7188FBB9E0CF884F
+:10027000B9B730B8509C7B97997A53A5CB8453611A
+:10028000A08EF4E30EBDA98BBDF8F5EEC958F12E92
+:1002900008AFA242C6E306CF9ACCCEF31D6B1D9FDA
+:1002A0008C687BBC15E125A74C76117F5CD1CF37DC
+:1002B0008CEAF73B103E4C74036E8DF5F593CDC779
+:1002C000F6CB799DEB423C7B701CADA35956C5BD66
+:1002D000F940DD38ECB7BD54E05DF7F6AF8027CECE
+:1002E000EBB2C2ACAEF3B2E2ECA7C845A9E128BDBF
+:1002F0003DC3845FFB10EF146A57F6C7BE1E9AAF6A
+:100300003DAF714F6FD28B6F157A31EE2BFB41648D
+:100310003B48A4974E91CFDE42F95339A092FD9904
+:10032000D923207B48CF5B00EC2702DDAF13AAC89E
+:10033000FD8AD84ECEBE15ED27ECF7DD5537A6D198
+:10034000FDFEEC944569F96E8A6FC2A90EC0BC64CB
+:10035000F38AFBD9CFBCF76F65543E8FFDD2D73BF4
+:10036000C53973EE0FFEB69CE900B474E7181ACFD6
+:10037000C7EF0B44D2649E5FF9B59F0D27FDAAF726
+:1003800059F730D2CF7AD1392F8274A8491F9755A7
+:100390004486FBDD9D70CACC4F6CBF649BF03898DF
+:1003A0007C72369D8758F7301EEAF1069F879F348E
+:1003B000CF4FF28C69A984E707075AE75AAD59E491
+:1003C000B2AA4E3252E7D03CDF94F97EC567AA91BB
+:1003D0009A86E527C1CBFA63A0CDCEE744ABEEAE5B
+:1003E000E899EEEE3E6E7F4DA1B06FAAE2E2A2AABE
+:1003F0009456079D6755FD9371514D6871273A0FCB
+:10040000B3D65F9DA68032145309BCE7ABF7E23F39
+:10041000E48470DC629677777FE3E7E6FAACFB1959
+:10042000D5743F033FAD7ABEBC279CC70EAD3E33AB
+:100430002EE61E04D96BB4BEEA3313F97BC55D27E3
+:100440001C84DFD40F3D8560DDCFE80ECED985C298
+:10045000DEA8A67B0D19D1DF051D77F69FC9E54FF4
+:100460009A707B72AF6DDAE604F37CBD50D8DD4341
+:10047000B214F6175CDA0AC6A604E35AF5ACF70D17
+:10048000BA9B57D3A4F07C9A37C505271A6FA709E2
+:10049000476BBE4DE9E1255E71CE3A90DE2FE8C88C
+:1004A000AB91FE5747F1D3B3A67FA0E93BE1FEFC39
+:1004B0005EC615C28EED6E9FE7F4F3A5137F18A9F3
+:1004C000B4DEFA4A269B5D407EB49EF35A6D242723
+:1004D0003BF84F37FBDD096739E61E4C57383BB810
+:1004E000BCE3FE19181E299BE410B03EF0D01F4B50
+:1004F0001C0E1CFF980D22C477A6C87DA7BE4079AC
+:10050000B41F882E8FB1ECC07483CCF7998E3D9ABE
+:10051000EF20BB6C49394464E45BC7DEEA5F477196
+:1005200097DA02D424C7A1BAB336F6FCB1128C3DD7
+:1005300029D8EEC603DED456CC2FBA27568E1D7BA3
+:10054000EBC70EB207A4856E3FC515E13CA7BE8080
+:10055000F9C5CD0EBE9FB5E4FEF8FE62F5E06C5322
+:10056000DEC6EBC39F179AFAF048184972E685DA9F
+:1005700066F17E8E791F11F53F23119E587A7028FF
+:1005800079D2DF99EF43A34C7C699C92B8FE92220A
+:10059000B10F2B1F3BEDF068DDD3D971E42705388F
+:1005A000FE895A95D3ACC1866B30F63F60B02F659B
+:1005B00030B697B548FF4FD8CF29CE4111DF385F0D
+:1005C00043F7D448DECE157A8253BEB992F5D13EB8
+:1005D000A006597FF1FBD99F6E43FD248DE2376E53
+:1005E000913DEC6F10EF078DF968511AAD37F3BFED
+:1005F000E73C4D70A53B0E40EFB0941BA5C4DFD780
+:10060000CF70F379FF265B80FBA140ADBB109EA1AC
+:1006100027C7EC26F77941E3BD93C8EE535B76B567
+:1006200092BD526FFB740FC525D44F043DC8D00E48
+:10063000F138352D339EA6F6FD67BA75BA5FBA3E1E
+:10064000D72855A3FAD720F21EE99927AB6CEC37CF
+:100650003DD5FC0B3EAF42FB2E42CAF7A9AA3CF6A1
+:100660009B59713F7CF697C06F7802E51B44DDE72C
+:100670005ED1B4C946FAF8A5B451517155D6BCAA99
+:10068000EE6CCDBE8EE4EE130ACBD1CCDF5CC1F1B3
+:1006900003B98A26113CAF9354A18F9A7AF2B560C0
+:1006A000FD35BC42FAE942D293110F3F94421CAF90
+:1006B00069839667A9FDDC1CA10F82D63882FCD71E
+:1006C000E12AF37DA2E5F634D26FAC7382EEF0A19D
+:1006D0003B3F0FF6B4E41D1CF7A404EC6FAAB14530
+:1006E000FAD3FC8EDB13CBD779834D3E30D01F621B
+:1006F000799E0EEA6334AF025F2ED165B54D5BC9BA
+:100700007EAF7D5E8E0F6997D4F498775ED4865F56
+:1007100093DE5D6353857D73C028A5F398F6194574
+:10072000FCEECB497BB83FF311E47B149775EB13D8
+:100730004D3315845B756FD4BB30BFF9895D3315BC
+:100740007A87272FBCC486F95707FF45940F091FE6
+:10075000A6FC1F9FF848940F0B2FA1FD39F9C4691F
+:100760009127030C11EC6F4FFCEFCC00AEEBB8E916
+:10077000FF043D3C9FE659FDC2205BB47FF1C86099
+:10078000C1378F27897AC773E186AB49FF280CF3FD
+:100790007D18ABDE6B83CDFB0426FEDFF462522BAB
+:1007A000C5095BED202771FF41B3DD4DE67B59485C
+:1007B0007FBFA27A2FE768E9BCCF479147115C9EC3
+:1007C0001FCCE73D370D4EE7FA049FF4A2AEE32DB0
+:1007D00023394F72C01E7BFFADC1DC2F2812FD579D
+:1007E000F756D3683FB2D3859D811B927617BF63BE
+:1007F000B0C9D4ABC4FE64CA6A695065B9339CEC15
+:10080000E697CFF62D65BBB9A29BFB9E83851CBBEB
+:100810002928C689F4D2D4CD7CEF1C0C8A4779B93B
+:10082000396973F47B29274DF81E199C26E0D7B14E
+:100830000F3D251E2768C2A52FC2BBB8137FACF69B
+:10084000175AF7F67FD1BABBEC5399989FB51E8023
+:100850007B051C707E69A8E71F5F63B61B6DCD43E7
+:10086000637AB8E9C5DB3708FEA7A5B3DD0E3F11F3
+:10087000707059E316F1F9E40A530F96036F38C804
+:10088000DE5851DFC6EFAFAD6814EF6D75D29DB184
+:100890002A9ACE32F3C53A33652333C8F488EB6322
+:1008A0007A34CC788358FCE980773C1D77E94F4B4C
+:1008B0008FED4FE3FEBADB87B08917DFD83E041314
+:1008C000C3B383BFC4C1AF831E73CD76458867654C
+:1008D0005DE9F18FDDD171EED71CCFBC77B2E27646
+:1008E000335E558BC5E3154DB9B685459DF5EF6E65
+:1008F000BCD71B1D4FEB6A5A1020F957D352CE714B
+:10090000B52B9EDBFAEB00B65FB6FD010F05531F5A
+:10091000531AB2492FAE7A6C9DC7A0731625E021F9
+:10092000BE792C244F4B747F75D41029461FABA67B
+:100930007F62FFC79FFC5BDDBFE1FCBF9050BF4201
+:10094000785737FDB58EECB73D862B4272FBA81267
+:100950009E4A72F4A6056E3FBD2F58D31CAB4F2D97
+:10096000FBE503D91A077707FAD8589F6AED43EDDC
+:10097000AA1FB5EB64BF57EF93751C066A20524758
+:10098000F38B6F5FD3F8A183E0AAA23ED8775CD740
+:1009900072E4248CF7354D3FFA54F6507AEC1D285A
+:1009A000A1FEA2FC1108F7CA6EF4B2C221B1F7028F
+:1009B0002CF840288BF59BE0130F95BC8FF33AF190
+:1009C000E86B1EA9285A5EDE29CEA91A6FFCF90B26
+:1009D0005AF772F524E907CEAE7A80D62C0925BBEA
+:1009E00045A455F6560FF905AA36D9F5007EAEDABC
+:1009F000FA8BC7E95C05DE76EA74F458B5F5B48382
+:100A0000DE3FAB928C88C47A1678A4919DFBB47CAF
+:100A1000EB47C25FD54B86E9B84FCB7EF5B9A86FDF
+:100A2000402409EB2F7FFA7DF66F55F9DC7E578263
+:100A30007DAA68DCE508BB13EC53E3FB53490F0ABE
+:100A40003EF125EFC3B19D12F4CCEDDABE72D3476F
+:100A50000EA29B13B8211969025E649FD634CA0B9B
+:100A60001CA989F6ADF52AD2FFB09CFD2017DA3F0C
+:100A7000D7101074F1DCD66D640F54BEE3D4A7D345
+:100A8000B8DB6EF100EEFF11C52FF0FD67EBB20D84
+:100A90001CB7D21EC8563915DF2B1FB995F170E966
+:100AA0009BB766B35E07462FDB685E6F2F5AE7E29F
+:100AB0008DB3789D4BC0C77858F933E1CFF85C818E
+:100AC0006989EE1B6F1F22E487136E2E21FAF81C32
+:100AD0007B223FCC11078878DEB7C43B644EB83A1E
+:100AE00035FA9DB93B8708391080D07BF4FE640D40
+:100AF000DAC5C417E4373F9F4AFDACCA55FC4E9592
+:100B0000D71F30E1259D13F11C9A62C59DE6E17E59
+:100B1000BD39A527D9C14E38E5B8BE8CDF69D0C82C
+:100B2000FF1BD58EE17664B33359423BFF4876E232
+:100B30007B84EF99EBC0BFB7200A9F6AB61C617C2B
+:100B400002B4BB527344FE61A243B48B52116E9F38
+:100B5000EDFBD0D19BFC1D99361840F36DFB88F35B
+:100B6000A0676954DFEABFA6D919F32E49CDA31FA8
+:100B7000C5D1B333EEBD133FC3B3065235D2378F61
+:100B80003822535FA471705C8AD75C72BF33E6BDB4
+:100B9000B04E7C71747ECFEDA44FCBBE5A6AD27F2B
+:100BA000FCFAE3F9C19371FC0036667DA5F79FAAB4
+:100BB000ECA1C7093E5548AF01A657417FA8A347FE
+:100BC00006203D7CFCD44BFBBF4F7EBA467BE674CF
+:100BD0001E2D96CF563E83F44BFE348477924E7C86
+:100BE000F64B07E9BD39156807E3BC3F76EB74297E
+:100BF000AD2BDDE2F78474EB063ED7FABFC55F97F5
+:100C000076C35FF7C5C1F373284AA53B0CC79F5C49
+:100C10007E09FB15E2E06BD9BBF17CB37A88C67024
+:100C20008EE79BF8B71FA2E0B8ECBF3F61BCFDA206
+:100C3000973807AB7EF4AF2CBF10AC1127E26D756F
+:100C4000E853CEAF23F9C5F95D33E9BCBAEBBA631B
+:100C5000E1195FBEC1E4471DF7DCEE8400C5DD4548
+:100C600076C8FC0E433BCEA58EF4F3A772F99C70B8
+:100C70009DA9EFB7AB110FE9E7EBD2AC3CDC40EF3D
+:100C8000C1B4074AD400B54F32E30FBC114F5A9498
+:100C90009EF47E8BEC21BD2E1C826989DF050CF24F
+:100CA0003CC2D05DF91A715F4B3EBB2D6CDAF54E3C
+:100CB0001C2FBCE6CB6D746E7E4871F1B9E5A23590
+:100CC000733C7CFFAF25FF3F092F16BF8A70247A43
+:100CD0000A188E5E08E71B0508D0FC08F079B09C66
+:100CE00052B6E745ACB704014CE724F1FE9465E049
+:100CF0004D6DCDEDEA374139E820F9BF14E511FB20
+:100D0000BD37C6962F6BF998F16C591C9EF908CF28
+:100D10007A75C5B3DC4B4DFF4A29949AE7BA6CCF7C
+:100D2000B7EF95F93CFF940B58DFA0735EDC3138C8
+:100D3000D522F3FE9C7A4A0A71BC61204BBCDF8A43
+:100D4000F84E7A968587F1F67D7C7AE2D97747D29C
+:100D50003DB1AA5FFFA5E4BF303DF1EBB707BE4848
+:100D6000F9E7FEDCFF2FD0B57EC5CEBFB21DD3BEE6
+:100D7000D3C9FED0F69DBFED4F72B9FD05A74EF861
+:100D8000DB7EA753C435EC4CE177CCDAFB09BF5DC1
+:100D900070C7972561965B6B791FA75FEAE0FD3E00
+:100DA000D5F2379623A75A9C1AADA366670FF68F24
+:100DB000D5BC901422FF40FB8E2F4746BF77F5CF5E
+:100DC000AEA7DABC4FD39E0273296EA63D4DC4591F
+:100DD000D6BC38E6176BC81E69DAE520FF7FC56F01
+:100DE000FE5E427CA9FD995D0EE25B68973E02883B
+:100DF0001F732EFDE903F65E745F0CD8DE3E7DE9BD
+:100E00003BB3E87DACAE701170684738D0BA102E95
+:100E100095A49775078FEA6F2D3C3E657BA2AA6566
+:100E200014D351275C24437C4F09B9245AFFF31E85
+:100E3000F21BB5E7A1FCD769DD5F9690FE74A17542
+:100E4000FFC7A5E27DEEFFE7D76D838B5AF753DF2F
+:100E5000DA750BFC1F76A926DEA78AA383AE78FE7F
+:100E6000DC0F38BF2D45E7F97E45FA7FFD5BBBFE01
+:100E7000AFBCEF25E4B7BDD87DFFF85BBBEE0BED53
+:100E8000FBABE6BEA7A874BFAE7DC7DFFBF37ABF9E
+:100E9000E2BA938BBEADFCEDFCEBEED08F64AF8B72
+:100EA0009ED8BA075ADB344CD775A3A78C2AB2FC5C
+:100EB00010C21E914D7D631D0C3336915D857A06FF
+:100EC000D901EB3245BE1EF50799EF0F72B00AD477
+:100ED000F7D5C5BBB68A1F54CCDBFF7C23C7B3ACA8
+:100EE000CBFE0EE495D17985F06304D7E8BE5DD8DA
+:100EF0003E9866D3823A3D57B5D2B709CBD5DEB21C
+:100F00004AF6CD3AED6A57F43B168ADB1163A7B86F
+:100F1000E3EC8DE402478C5D9204BB55F2C327E9F4
+:100F20000AC7FF3921AA3DD6CF2A12EFF42743285A
+:100F3000A0BA2F1E4E8BBE3E9C5C7CAF5235E104A6
+:100F40008641EB766A0AEB610AA0FD28D621EC4EB9
+:100F500084A316054730ED50C504B9A20D6338A22D
+:100F600001A14D1A4D70F5331C83BD6495E1DAD9AA
+:100F70001FAF3B7E1FD6699320CFD4C725FD9B872B
+:100F8000F3D822111F100F672BCDF795AF21FD77F6
+:100F9000D51A71CEF5CCEFBEC3F9263BEAC374CFA8
+:100FA00030D5B7A288FC8E5E43223A5D3543BC2F14
+:100FB0005846F7C032C9D41771B899AEBEA0B0BFB9
+:100FC00012ED0CF657AA40F69F3C091AD91FE855B6
+:100FD000E2E27A558E7B0ADE2CE29EA01034F14EBE
+:100FE0004B6CFC4F601214525CC314B9AA81E675B5
+:100FF0000A521A28EED2616FEDCFFEE17E008F918A
+:10100000BFA5FC8B8D549E8B7A3DD07D32A5F53DDE
+:101010008A6FB84D4E058EAB8AE0A728B85D76C6BC
+:10102000054A149CCB212D267FA2DFE126B213F2C4
+:10103000024E9582C72A5CBD62DA9FE87586C70BAF
+:101040003A5D2AD94753D4DC98F6B267EF7B64D770
+:10105000BC916E63BBE0F29CC131EDAFFAE0C4C657
+:101060000526CED23ABEF7AEB8A78AF6D623AF632E
+:10107000BB37EF0720BFF1155A694CBB66D3BF12CF
+:101080009962E7F766AE2C1C13336E737837C3A5ED
+:101090002A0B243A0FAEB2214960BDEFEAE531F5E3
+:1010A000BE37FA8A987E67183362F255ABBF0025C7
+:1010B0000360DCEAB340EF0796B636C6B41FBEB78E
+:1010C00039A6BEE7753485302DDDA705291D75507D
+:1010D000DC231D8EFB41E71BCDE1853AC5EB14D324
+:1010E00005D0323A16F0565018F2C8A3FE9728BD24
+:1010F00050FC3298EFB2269BE7AFEB6DA1C605B965
+:1011000014FFD3F0E35D12C743EE263C1D1D69A812
+:1011100048C5EA63CF34BE446953DBF87A7AC7B373
+:101120000AA08DE5AFDBC6E70253E4961289ED9F76
+:101130001EC39D51E72EDDBDD7F9A3D2F27D4548F0
+:10114000476B738C865DC4F727BD3B5FCEEB5A0FB0
+:101150005425128DE73F2AF51EA6384D2B4E2AB98D
+:101160004216BF4771B98893A9B3E94926F362FDD6
+:10117000409D6AE738FE65C582BF8D6CDBDCE82EDA
+:1011800023BBD3A5D1BE2667C4DEF3BE71B4B8B706
+:10119000F7459179BEA2A859D7931FBC3845B4270B
+:1011A0001F1F8D37DDC6FA94E780BEC78EF9FB0A94
+:1011B000F7A9C4CE9AA67F10E0F74D0FB44D903436
+:1011C000809EF794DAC80E87BD76FE7D99A6C2C9C7
+:1011D000A70BA87CFA5B1CC3B86BC22F0B49BEAD32
+:1011E0001C3CE4BCEF8C7ACE48A045C5412C2BD6E4
+:1011F000783E1E25CCEF1279CE285CEE99A7DBFA5B
+:10120000478DB77282D0FF560E4EDE4A78EB3960BA
+:1012100088B8A842B73680E9239CC37C4209E75CC2
+:101220009F22E2ABB4F3BCF37F7CCB88349263198A
+:10123000E57A1AF94133B6CA1DF7CE683D3FA6FFDD
+:10124000D0C13AACDF3F19E7B58562D744792BF2BC
+:101250002458EFB0CA9125613E43B2CAD7CF9E5CF5
+:10126000C4EF31C6D41F9AD751DF70E574F6AF15BD
+:10127000AFDFBFB688E037CA467125EB7F67E777F7
+:1012800006709DAC4FAC447A06E97CF0EC710178B5
+:101290007AB8FC90A4C5BD9FDB5A4CF982BEBE4112
+:1012A000C558FF92B3A9FC0EC067F5492CFF2E3933
+:1012B000FB3D7EAFB3C961F4BF9DFD37491C6F365E
+:1012C000E3E68F37AC26BABEEA7821C52858EF5737
+:1012D000D6A85F303FB0E2EC3AE187F88B78FF6345
+:1012E0005B679EF883A7139E06BDCFB53E0ABEF48A
+:1012F0009B2F334C78FA8A37CE5E8BFD6B8BA6E53D
+:10130000105D9E0637C7F59D561F9F4DF33DBDC529
+:10131000CE41B44D26BF0C149AEF11648673E85E7B
+:101320007EF19B368E473A88F860203EE4B7BE993E
+:101330005E4CED3295748A6F383DFECFFC6EC2E98B
+:101340001F0207172F0B3B185E4D998B2ACA19FFF6
+:10135000B574F23F58F06D34FB79B8D4B8B298FD4B
+:101360005CE67D1163EC45BD3FB96BC2977C2EB046
+:101370003617F5FC340A393E5347EF4BAECCB5B3C4
+:101380005C5A99F6C5D44CC2F7725784DE81A859CD
+:10139000FD19C317BBC98DBE07A69C91418B8ADF7F
+:1013A000D2868AFD571483F75F39E3E0F2AAD5A706
+:1013B000996F5BED4F98E7ABF42E23DD17AAFA8700
+:1013C000CCF746911FD64BC328DDED5819C54FA069
+:1013D000F1D30E3E3F14F7EABEE96F25939F728664
+:1013E000A4CEA2F9B56C3B339BE2056624A9B328D1
+:1013F000DEA06EDBFBB329BE60463F7516C517DC69
+:10140000573C790E97F7521FB0A1FC7AB964BEC859
+:10141000E7AA7FA2FC535BEF98C3F553C4BEDFB6C7
+:1014200075CE9C00F36337D3C1A9FA1E21E779E892
+:1014300060E9EA1721FA3DDB2EE5E6EF49C15CC120
+:10144000F73EB9BB0FBFDB09056D1C2FB6BE58F8C0
+:10145000FB3BCF5741A5F3D5CC7C30C8DF9CF95C72
+:1014600092F85DA2436DFD097E4736DEF203F2A7D6
+:10147000AE9080DFD1AF026D24D1D5425BF83D4AFA
+:101480005F1CEEBBB798F5A9368E775DBA7A27CF89
+:10149000EF53DD8C5B562345DEAFF54E04F69FF02F
+:1014A0009D88D838E30F6CDA40EA5731E1B2506ECC
+:1014B0009BEF10F37A94E6B5227D17C7392B6A5B50
+:1014C000B64FE851856C3FE524F37BD175BDDF292C
+:1014D00049F43B088DB528EF91E49EA96DE674F5BB
+:1014E00050607CEBA9841D3AF6537D40C89D916DF8
+:1014F0001F38A2E319779BF04D357FEF2A3E1E7708
+:1015000037C9A5A8B88315BD5BFB927E68ED6BE774
+:10151000BEB4F635F70568BE99192F3D45EF9D50CD
+:101520009CEB0FE93CE3B9A456F25B778F27D63EDC
+:10153000887937250BBE11793689F5A6F8751C34E4
+:10154000E76DAD2762CADFEED61131E5EBBF6A1D4C
+:101550001193BFC7AFC7A26FEBBB45DF5DDB8BF954
+:101560005F3CDE897B6D17C23B8BFF5483AF50DC41
+:101570009716FCC682B7354F0B6E4DDDC4E32AAB20
+:101580009F8F598FD236898C1E482D11EF5F298D80
+:101590005700ED87B2BA85EB75B71E39E5333EC704
+:1015A00059A6819FF4DEF875554123B7EBBAAE0812
+:1015B000F3E3159AE0C75DE3F823CC9FABD13E235C
+:1015C0007DDC5A77079FC6F5137D4F4086C37C9319
+:1015D000EE124A645FF862F4E372BA31117D6EE58F
+:1015E000BA39263F45BD3DA6FEE5396B62CAAFD08C
+:1015F000EE8E29BFB2F0DE98FC77F59FC6E9F79B27
+:10160000E2F4FB2762CAC787DB58FF7EA3761AC7BE
+:10161000A74F3C1A613DBCB556E5FCEEDA1C4E5FA7
+:10162000AED598FEF7D41672BAB756E7EFBFAB1D2A
+:10163000CDE9EBB506A76DB55E4EE3F946595BB84B
+:101640008CFCFBA33353F93C6AE350DFF525140708
+:10165000B92F5244F837F640E34B240AF2439FBEB9
+:1016600047F54EAB0E8E475CBB6BCC1F6EC17CC684
+:10167000EB322469E7D38B6430A2F0C7333D0C749E
+:10168000FEED01F13E567CFD8525424F9E0B61F13A
+:101690009EC06A3E0187B92EF5152393C54684EC9A
+:1016A000F6B9E0673DD4B65ABC5333177428237B90
+:1016B000D607FE7B381E29F67D01AF3163DDAFB062
+:1016C0007C36DD3BC5F6DF7737F2BDF267F6A64F15
+:1016D0002EC5EFD77A25FE9D8F033BEFBAD5C5F611
+:1016E000AF75FFF41DDBC5E8130B4B047DB54B7ADA
+:1016F0001BCD379026DE2F8A6F37CA5CE755C108AD
+:10170000EB1F11D43F28DECCA2CB19EA2173FD9A3E
+:101710002D750CD1C71ABEDF50D5A6E94184F798C4
+:1017200043822E46205DD0BE8D3D2AE86024D20142
+:10173000CB41D33EB4E800EDA997A8FDA983A03B17
+:10174000B17DDDC41FC9647F8DF92C14A4F4B2B33C
+:10175000915DE7B07C5C9BF8DDA40BD993965EDAD3
+:10176000523B97F16867AD8FD3D6DA4A133FFD9CA1
+:101770007FB97635E7F7D40638DD5B5B6FE2670348
+:1017800097BF5EBB81F36FD4864C3CDDC2DF3592E0
+:1017900067089FBB4B4C39ED2A37ED0A917A8D359E
+:1017A00076BEE78F9F889FCCA5B9127E544A21E26E
+:1017B000DF75E9013BE5EB92690F68D601AE7F9DCD
+:1017C0001B5A490E54E5BC28F4B0383C29CFBC86DE
+:1017D000F164A619C77A20BDEE5607E2C389C6FB9D
+:1017E000ECB1EF8D5E1C5E2C73AFE57B7DF17CF17F
+:1017F000267A8F42EECA0F0174BDAC4CDCEFA238E2
+:10180000BDAFCAEF555B9B795F4CDC7FA9EEEBE681
+:1018100038DB7F9D9C514D39030BA87E87FD9D7C55
+:10182000703EBD8FD7052E71F6F7E141627F2DFB2B
+:101830001BF54CF64BB58764B6BF2A731B3C6C7F17
+:101840008F8E78683F6FDA2103EB8B8A38EF5D4A21
+:101850001D6914D7D3BA7F1CCB99557B882F2D33A4
+:10186000CF7BE3CF6DABE9BC574A04EF30C7D52F30
+:1018700037CF7BE3D75D3DFE089FF7565FE05EE91B
+:101880007B25B1BFE7137F7FB73B7CA17882E8F768
+:101890005C4F9EAD653BEDC8B63B1E0AF4FDD7ED2F
+:1018A000DFADA5DECF4A441C35DF9BB3F6B3CEFCDB
+:1018B0005DCEBA492EBEC7D03E42E5F76FDA25F1BC
+:1018C000FE4EFB5F415FA3D1FB3AEACB24172ED338
+:1018D0001DCC574787C57B01E3E95E6282F702268C
+:1018E0001C0A0553A8DDC100FBA3C6ECF305E9DE25
+:1018F000EDA8D70D99C8ABF465AF4C7860C9274BFC
+:101900005E75D295796F8E6232F2BF3AFD698B4671
+:10191000E7907ED761B7BAA7F23B45A75B81A349A1
+:101920002DBFD8F083864CF712461CF20549DED64F
+:101930009976E6A813013915BF4FF8CCCF76D018A9
+:10194000B453E552718FDA8882AFE5D7B2F89CC5FF
+:10195000D7AC7B7BAAC3B785FCCFF04212BFFF1286
+:101960003FEF41436DD67BD6838612DF33EFE94DDF
+:1019700091CFEE3A4776419B8817B8E46CFBE3645D
+:10198000F7AC7AB607DF53BB907D50A39E4EA89F5D
+:101990005A698D4D9CA30CABD08693BD497A2BD947
+:1019A000A1965D1A5FBFAC74D2D8A15934AFF16D66
+:1019B00006E1B76A3B2F7ED7ACFEF4BC76A1357E3C
+:1019C000CD8E11EAC228BFD5EAA19219C7F2F5DE81
+:1019D000A19E10991B23C7BEED7A1FD26119E11792
+:1019E000D98624A7BE4F3B80EBB80E5A595FB9DEAB
+:1019F000FC1D8B1B001CD1F7646F0483F9C39F741B
+:101A00005F0DE1CD6288CCA77C8D14A97A1141F8D5
+:101A1000C9C4716AAED6555E5FAC7C4E36EFC1C6A6
+:101A2000C3FD4E136F2DFEDFEDFEC4F1FFF65295A0
+:101A3000EF41B73F3BCE46E738EDBF97F9FD54ACD9
+:101A4000C87C25384CDC3B1D3ECF7C8704F9CA009E
+:101A5000BD2B5F393D7ECE64F61FD1C106C59F2ADE
+:101A60007AE1F551F7CD82E6EFBA6CC194E22553E5
+:101A7000E78595E8F3B39F9AF32FBF7632903D74D4
+:101A8000952AECCE292EC84C225E78F674D12C64AF
+:101A90001057913E3B9CDF617F98E0DCF10E08F12E
+:101AA000A34B70DFDE17E77C7093C4FED2E626916D
+:101AB0002F5E9CC6EBFAAAFB883DF728C1F52F6E76
+:101AC0005286117D0F4D8FE4115D168F793B5DC2FB
+:101AD000799598F7B170DAF510F5FB56EF9AEBF8B7
+:101AE0007CA8B18DE63734BD6DFD7DA45F3E6B03F0
+:101AF000F21B1E1973FB128892CB9ED249BFA27AA9
+:101B0000DB25F39DBA1DE2F70CB04576B47FEB4FB1
+:101B10007AC5F354AFD5F433C0AAE7F91EFF0C55CC
+:101B2000EC014CCE327F4F32D23FD1EF0B59E75907
+:101B3000430996C2FFC8EF8A6D37FD936F0EFD60B3
+:101B40000EF917A1359247F3389224EE517B4A7D66
+:101B5000BF233E3394FCBCB48E9F09FFC091343F39
+:101B6000DF23791BF9339D1FFFA5D6C5E9BB681F8D
+:101B700051FA3F681F51FA3EDA47947E88F611A564
+:101B80008BCF60A7B87F3374E36DE6AFDDACA37B8A
+:101B9000FE1230F5FBC4BFD3F49609FF92A643773B
+:101BA000F6203C6896393EBAF85985F5D3932DA3B3
+:101BB000627E9714E9F530ADAFA4F98F3FA17BD6D3
+:101BC000254D8A2A69742FFB7436C71FC6CD8FE056
+:101BD00040E70D911D0EF17B4AE67CB7A7B5ADA796
+:101BE000F6DB9FCDA319D2398EC0C31DCE84BF377B
+:101BF0006CC5DB3D3154E85FDF7346CAA2CF1FE3FB
+:101C0000E3D3D80F3C86F0B9E00F344E60AF0C033D
+:101C1000182F63FD1BFD74710FC14A8B7738384E46
+:101C200079FB8EFD575F89FDFD1F8FB61B3100804C
+:101C3000000000001F8B080000000000000BCD7D9D
+:101C40000B7854D5B5F09A39F34A32934CC2000957
+:101C5000123809AF00018664121212E024048A8A45
+:101C60007482D482A28EB462541E23D29ADED23FF2
+:101C700027244012830605CA558401C1C7FDFCAE66
+:101C8000D102175BF44E50A9F6B73422E2A354C731
+:101C900047552C4A8A62EBAD2DFF5A6B9F939933BF
+:101CA0004C0222FC97F0E9CE3E7B9FFD58EFC73EE9
+:101CB0003BB3265E5E24C900A7E9670A80CBDB1729
+:101CC000A008604CE9D70FDCEFC1F2599BDB0400A0
+:101CD000F360DB3437F6BBCED1F1A21BEBD7BBDF11
+:101CE0009B968EF51B334D07A8BC49CE999E812546
+:101CF0004088DFFF515EC5810CACCDF456DB024E4F
+:101D0000800A9000F2807F4EE37F531D29008E6889
+:101D10007D9ABB8FA1FEBDCCCB0CFD2F978718DA27
+:101D2000AFCC1B6D68D7E79DE92D34F41B97D19597
+:101D30001B74D23EBEBAA71CF70326080FA37DED85
+:101D4000FEF2EDDBB19C35719E8FF67F0CDAAE1999
+:101D50008D1BFDA4A479E3FDF4B245B165F503B88C
+:101D6000857EC7F6E3103E5286ED926BF9813BF11A
+:101D7000BDDB322590BC00359BADEF4762D6B10488
+:101D8000FC6961EC77DB0EE37380882DEC03B83DD2
+:101D9000E00CB62000173D81ED0E433B8FBB78AFC2
+:101DA000CD4DED4BC0126DCF01A83D9AF3E40B3140
+:101DB000E38DCBE8BCEF7E1C6FDC9E39EE065CDF6A
+:101DC00093A55F0F90719FE55E97E723040D4C800C
+:101DD00009A711E42039CD80FD4EBD2485245CD7B0
+:101DE00034E99BD4483E3EAF423C67E17B26F90F85
+:101DF00065D8AEBE2CC14E1CE76F75F2932F5869A3
+:101E00007CB8D19F1FA50B80950C5FBD7CAB0E7F6E
+:101E10001D01F0C73A07977FAA7373F96E5D269785
+:101E2000EFD5C95C7E5097C7E5AC431068C7F1FE9B
+:101E3000FCF7F1007D681C15A06FB41C67F39A07CE
+:101E4000E03ABA7E2F85B6E37EBF289F9006B4CED7
+:101E50006F70FE620D0F4802D5448CA5F8DF8FB776
+:101E6000BD98E5E3E7AA0BA75AF27709141C77B9E6
+:101E7000D724C65DD4F1629627DA0ECBDF33F48720
+:101E800015A603867A638EB1DE5A7120F67D1D0E8B
+:101E9000F1E52D9BEFB0055C58AE372921E799EDB0
+:101EA000FA7AA6ED4F524C389E659F3D64C7FD2DD2
+:101EB000712BA0607F0B80D29E7FE67B00F50CE744
+:101EC000791204DB138C5B47E312BDEF4F02E93C50
+:101ED000C67D0B6983D6A3FE973DB413DF7B2B4DE4
+:101EE000017FCC3C2DDAF89FA5B7FDE22BECF7D9AA
+:101EF00033404FB00E73693D63777D6C3663392E86
+:101F000059D0C95877C49C81E5899A7F6C3CE261BD
+:101F100032F59B26637B6ED71107A2FCBEF6AB366B
+:101F200039106F6F9BCD00034020BE04FBE31854B3
+:101F30007FD07BD5DC46FCFDCAFD4961F379ECE737
+:101F400041E445A6A34AC1EF3710DD88791440511A
+:101F5000B37415E8F32A241F68FF547FADDDFFE654
+:101F60007AA233E8DA48F2E13840B885D7AFA4C6A0
+:101F7000F2FFD2677FC2FCB9280BF99E04E066C16C
+:101F8000BF0EFC773A97F83534DD89EBBD358CFC14
+:101F90000F179FFF9FF13AA37C3E22219F1FBA1289
+:101FA000EB4B9F91BC766C3EB96F98E0278DEF7537
+:101FB0003ED7E1B87493C47CA9D73FDF27CD08256D
+:101FC00080F7368D2E86285DB369BE65CF5AA00591
+:101FD000D7B76CD288FEB1E3C7BFB7B44902396640
+:101FE000FC279FB3D710BFC8D0D5AF1AF967DCB3B1
+:101FF000A7322AF24559CFF868D3E44DD720FF180D
+:1020000094D726FF9F7E8EF301E27127C2A7327319
+:102010006E36CD3FDB094ACB7806CB1C07CA89ABAD
+:102020000588E0EA92EBB201E1B919D12521DDCDB5
+:1020300051AA5FBF0EF1F80373E02A92F3C7BC43C5
+:1020400078FC6B5CCBAD606672CD36E17873E7D817
+:102050000B693FB31A045DBF9EDE759C9EBF3E298F
+:10206000C5D480EFBD6E8246C888EEE375AB3F9B5A
+:10207000E80D37EEFE08F163524649A7537A9617EA
+:1020800044C91FE97894A2F26F9AE454699E936E52
+:1020900033D3BD25ABD546EBBA154207149C7789DF
+:1020A000376C23F9773BB82D5462D1D54D1F447F4F
+:1020B000E5FFE8388DEF2FE9944226ECDF5ED70E7E
+:1020C00016C4EFD3757BB91CFCCDE0C6CB101ECB7C
+:1020D000C7DBBC2DA4B734FA32AB26389D405F9DD8
+:1020E000499F96683BAEBBC2E10C4BA9F4D87A3C41
+:1020F000761D8DD94ACA78DC8FBAA63C9DE99368D3
+:102100006170749FE36C004E92F33B5358CE1F7B7B
+:10211000AED84C783AF63B6BC844F52D23DEB8D3E5
+:10212000C7752079732CC36BB6517B466E48C5F6D4
+:102130005BCCA0925C86ED426E3D3FE9AE77488E67
+:102140002DDFE932D94D828E653401A447D7BEF325
+:10215000EF38CEADC8AC766F546F2C9AF2E8C62734
+:10216000900E1699DBEE29C767A7203CD68DF0FCB0
+:102170008BA97D38E9ED8F1FB287CDF4DEC323B77D
+:102180004B38FECBA98191B41FC854FAE7E0F39A0B
+:10219000437DA105DF9FFAE83F0F92DEBCF5C9BE83
+:1021A000CC5F3ADD4F233EC4F59C403EA4F59CDC59
+:1021B0003784F92E8A7F0187C5280FC8246ADEB1CB
+:1021C000CE4FF80C24CBFCDC02AA7219E17BEF4D58
+:1021D00040765381645288CEBB9A115EA633E9499A
+:1021E000196FE6F7169951BF121D06E44282C7091E
+:1021F000935CA0F105D07ADE7F6EE4F6167C7FAEAC
+:10220000D63F4A774797FC86E86EB3DD6BC7251C3F
+:102210004F32EA7DBD9C393E9DF9E516C79760298E
+:102220008C3E5F52FBB5B19E0F0AC98D8206B9F094
+:102230000E2CEFD4E07EC548FFF7C7E3FBB7B5AF80
+:10224000DBF38A4CF36EFEE9DB34EF4B4E9E175EF8
+:1022500011F03B6112FAA55BBF3AFECAE3A3E4E1C9
+:10226000F5EACF3F7EE88DB1011CFFE3DDA38703D4
+:10227000D2DD02A9F3A307115F9FBB3ADFF93996BC
+:102280004FBF74A81FC12F7EBD8B6ABF004B8C1C33
+:102290003A6E32F17E17D13EF0F96F0AFD3733BE48
+:1022A0002DA827106E0B5AC66C2779304DCA4F23C4
+:1022B000BBE9C431E3FAE2D7A98FAFAF4F1F5FEF9D
+:1022C000B78CE08F709838CE2DF4ABADF373C2EFBE
+:1022D000677B469B9015A3CF333AC7A6E747F1E447
+:1022E00057EAADD4EF1A12F5888AB90E81D7B935FD
+:1022F000A650430EF7E3F6EBF039E1BDC2D3C0F5CB
+:10230000394ED467D87F51E66F785D24E81CA8D792
+:102310007E00FA4FF5AA5F61BF3797A5B25C987B44
+:102320004B9B95ECDC6E79A6BE6D3E3DFADBCB3364
+:10233000849EECEE07CCC3A43F013767C1FA24ADFD
+:102340006E2AF963C3AF483EDF99EA95D064841AD8
+:1023500019C2C4D7272144F05E6D0AB2BDE7203D03
+:1023600080658BC99B69C1523277F5019E27C47085
+:102370009A06010BD57F6B8A3400BEB7CA539949C0
+:10238000F4FF2638FD6417FD207DF51892A395EE25
+:102390009973E9F96C35D5DD82FB6DB4CA77E793A3
+:1023A000FDF303C94B76AF0E175D7FCCB578AD0456
+:1023B000DF7E41D9AB22FD16BEA2384C0C7F874A86
+:1023C000E3BE6109F6A575BDE55C3FC664263B2DFD
+:1023D000E41A839B7DFBD07F14FD1EDFFF2328932F
+:1023E000C81E98F35B07CBF19B40667EFF11282C3B
+:1023F000C76F8600D76F8188F54B7CEFDDD2FFD9A0
+:10240000B91FA2FB7A77E257BBC9AE9F2BB5F7CDB8
+:10241000C176B512F248CFFCDAF17FB646701D4A9C
+:10242000830592D0BEFA35D129D9EF475DA19DD859
+:10243000EFAEE42DA91D588F9884FDA556069FA4E4
+:10244000FEAA19FC0D58F64D0E3C4F7CF8CB14310A
+:102450004EADC5E126F94806168DF3D13B2EA67781
+:10246000D2BB3761BD0CB145F03AD157D09BFA577A
+:1024700060B97BC2EAED5468DC53B27727BD3AD528
+:10248000CCEFC36999D75116A75F7CA3CDFC3EFC66
+:1024900043E6F72775590CFAC537CE1C7C1AF73777
+:1024A000E5EF965EF5CECD05827F7C7DCCC144F60E
+:1024B000E0FF68FC851092683D0D7B4DA116264219
+:1024C000611F94E9F40891D5446FE50041A27BD8DF
+:1024D0008B7A4C9F2797F7FFB9EA233AC476B60761
+:1024E000DB9F2739690F0A3EC1FA54DA8F23085E51
+:1024F000B2D750218305EB49F8A290BB6E203BB6C2
+:10250000A502DAA93E092212E17B0A417A08F9C341
+:1025100032D3ED5450B8AED3F1F740E5F272087102
+:1025200079258485BE07B9F1299CFFAA4F40EC6745
+:102530005498E91D1D19F747686FC0E5B798C9EEB3
+:10254000F0FD30B1BF30A840870B22C473EE709904
+:102550000E814C31BF80879D9EFBA2F070C4C123C9
+:1025600089E0E18DC203E710F03803BE023E931408
+:10257000840FCAA7C9D025D13C8A66DF548297CB85
+:102580002AF073D90B5C5EA8F79C09979248C01299
+:10259000C84F009FA989E96684069F3F1600CB2F8C
+:1025A0005DFE5C5B20F3735D0E217F66923D1A2F0A
+:1025B0009FF4E7BE94CA2F64A487AA82AC7916D48C
+:1025C00067BEC2CA3B8760FDEAA7F344BDACF257C1
+:1025D000B958FF41C128511F5759684578D59B46C6
+:1025E000CFABC2FA90806923F1E5F27AB4AB715FA8
+:1025F00081A47B8244C7A60C709BB03D505FE42D44
+:10260000C07A00E912106E7629A79EE06CFF397837
+:102610001B7015196981C905B8DEFCF99DAB053E33
+:102620002BFBCFC5FEC73BAD6CB7ACB10583842790
+:102630006477777D69747FC79FFE790D3D7F7A004F
+:10264000B849BF80472EF4BBCE5C8FD9015C5F8C4C
+:102650007283E21F38DF4C9A2F80EA49A6753D2528
+:102660008508FECBEBA7B13F7024CFFFFD82BE31C2
+:10267000E3E33EA4F134AFD073E0C92924B8958CCC
+:10268000F45F4BFD4EB850BEA651BBC0434F6563CF
+:10269000813297E68D7F6E4EF9E6862538CF52A4BB
+:1026A0001192D38B0B0237D2B84BCD914185F86C88
+:1026B00065CA3B36A60B05E993E403F12BEDB7069B
+:1026C000E991E87ABFE057E40077B7FD8AF8F5F8BA
+:1026D000BB6E58E813224EC2FF15CF0D3E8F6635F4
+:1026E0008D7F3BAD63A9D4B590E8F2F3F4D76C7F4E
+:1026F00066BE1C28E84E935B4B9FFB9AF9E7593363
+:102700000425CD3F8618BE5BFA5C9285FCC3A59F6D
+:10271000422805DF2FDBF77803F93BA5E8FF939FFD
+:10272000BC78D753CC6FFB485F22E896FEF7B3CF57
+:102730003F487C7A6512C7A126BD767408D94153FB
+:102740008E461A106D70E2D9372E13F4AFFB257F39
+:10275000339D8F1E9F26ADB887F0BD0CF16FC7F972
+:10276000969982A26E75B855967BC24FAED1F6F19E
+:1027700019746E9CCF72453D504AFBC99480E56345
+:1027800048F81332FE23FEBFFD686835AD13A46F11
+:102790006C246F4EA15F4CFBBAFDB178BFA3EB4038
+:1027A00029F9DDE417E33E17B71BDB97C6EA870478
+:1027B0007EF296022D1E960DD9B4AF5FA33FF4C1F1
+:1027C000309A777E1AD9871329AE90405EEAFE715F
+:1027D00028B9F29102B697DB25E287324BE2FE0B75
+:1027E000F3855FACDBFFCB1E92D88F5BF6509F5119
+:1027F000EC276BFC0A612FF3EF93A45788CE022FCE
+:1028000003D1C12DDA9E60731FA6B95B9B4CECC748
+:10281000D8A53BBCA4F7C73DD2FFB67F63BA4975C4
+:102820004326D527CC7DCCC3F655908435FA556C1C
+:10283000673E99DE954BF33F992E838AF3352475D5
+:10284000E5929C559F757849EFC6AFFBED02E10F0D
+:102850000C098FDF14F1083C139FE7BC54BA89F0D0
+:102860007C12F99CF0B7CC35BC3F38C96E989C19E6
+:10287000C1B241B3D3731E1B95361BE1E2A3F5C66B
+:10288000D8D51DAF5E9342F6F26E8B3FC58DFD4EDF
+:102890001ECE35F841F16551189153D84BFB1B33CF
+:1028A000870412C05D2F7D9B2C0C2F9D6E7F5DA732
+:1028B000C00756C247B9D8876A77DB7D447FA1A994
+:1028C000E44F2EBB19DC2DD87BD9CB0F3738A8DECF
+:1028D0000C4CCD27E97FD4FF137388ECF15FA68CF5
+:1028E000BDB71CEBBB8E59849FA22A87F263EC58BC
+:1028F0007BA6196403BD764A8B491E13DD23BD26D2
+:10290000C9C920C7D0634A5E86A1EEF20E30BC9FD3
+:1029100056926B684F574619DA8BA13612C0F514E0
+:10292000654AEE10AEB8CF8C0243BB1DE93A4CEBC2
+:10293000FC52D85125F84FE8DB20DB4365118007B6
+:10294000900E261E37DA59259136F637930E5B0C1A
+:102950007100FB59E250C9851A7F0D8481C45F481C
+:10296000FF5E9263270F8BB893ACC17359B6D0CF7B
+:10297000CB5E96D80E5C76CCCC7AE22478BBF14361
+:10298000F251E7BB78B8F7F51BE1DC7FAE11AE5929
+:1029900001235C2FAB31C2353B6884EBE05A235CEA
+:1029A0007354231C87344D34F41FD65669A88FD82E
+:1029B0007485A1FFC8D06C437DF463D71AFA8F6980
+:1029C0005F60681FB7F736437B3C5D8D0F2F33B4D4
+:1029D000DB538F305D1D40BA32A13E287CE9DFE237
+:1029E000E8C2C2702F1AE8F48662F0AFE23FC27FFD
+:1029F00099969798006A03F1E385C2FF1584FF94C6
+:102A000028FE75B9DA139FEAF81D42FA9AE565794E
+:102A100084F07EB22485E9E5E04B270F2B40F84F88
+:102A20008502DCEFAC29228E22C9C126A2934E700A
+:102A3000B591FDB9C61264FF4545B3702729E53845
+:102A40007FF3FB25E86FC6ACB35A49024BCC7EC777
+:102A500087DB0DF5C297F61AFA1775860DF5F18723
+:102A600041227D55F0A6F7792A8B3E5438FC55FC5F
+:102A700049F0792A4BBF0CDE45FA37DECFBD5AAD9F
+:102A800097D2C8AFFF7BFBF368D6A07F364825BF3F
+:102A9000377247AAD73400E191FC4E03F9DF807604
+:102AA000B4159511B80FB23E98EF10EFFF2D69F2F3
+:102AB0002AEA6F42FF9CF08E70C9237BAF1692BD4D
+:102AC0000417B25BC80F832B843DBFDAA4B23D9AD2
+:102AD00084F628D9230D157EB697A74370203DBFF5
+:102AE000069455C4779219ED577CFE3F23028D85DD
+:102AF0004562B1443F777D21B3FF3D85FC6906A661
+:102B000002A4F74ED0EFB43E78691EC5E34F902E75
+:102B1000C3F5B7B5BC304F253BC303EE08AE3B2031
+:102B200040069B0B03F7D0B8EF9BDCAB0BF1DD83CA
+:102B300013FF3288EC917585C2EEB34B0829A4814E
+:102B4000FEF315A0E78DD9CA7D8545D1384B4FF4EA
+:102B5000A3C733F5F8E6AEBA309716B75722BA8B4B
+:102B60008F3B46CCEEAAF1A4FF9699D8EFFC0B2D33
+:102B7000AE94E7496539EF804E7B3A2F99FDFFEB24
+:102B800035BC991D9DAB7E8EEFDD1014F6D60293F9
+:102B900097FDF5DB338F731CC52E99C047FE505A45
+:102BA000FE76117FD1E3259749DFC6CE3ADB7E6FF3
+:102BB000CF3C668857C1137D12C6D7A3E3ABACFFE9
+:102BC00062F6B9659347E835F2F3DF6FCEAE84D491
+:102BD00044F37CCEF1ABEB83AF1AF8E2C6DAB70C64
+:102BE0007C7093FA9EA13DE2E9B252BC32B2276BEF
+:102BF0003AC5D73FDB6D2F263C20FE0F16C6C4EB2F
+:102C000022CDA3AB60ECB9ECF72FBC8EA3759D8CE5
+:102C1000577DBFEFD4BDC9F5485D84CBF8FDEAF11F
+:102C200011BD4471D844F6CC5D12CA0BF277495EEF
+:102C30007862E405401ED9FF7749A3BC44EFB6FD96
+:102C4000C147A9BDABDEEEDEEEE3F808C74D6A91E1
+:102C50002EC86E00A7787F81CDC176E81D3EE12F9A
+:102C60001EADF8EA06B25F7320D58B32107FC27FAB
+:102C7000A2B8C97C531AEBFFD55907B8FE61338857
+:102C8000BC514DF821F25797A6A60ABB58C1FE5871
+:102C90003F9161E6FAA11181AF981FF3C39CDF5801
+:102CA000DA5FC4F3C01319447CF833D9FFB5E05799
+:102CB0007780DA6B32D0DF46FAFDC4AC8E35116B0B
+:102CC000ED1A70AD05F1FE49B2FA395934637CFD55
+:102CD000AE253FF3139BE0DF49BB4ECF53113E1FA0
+:102CE0009A24F6CFD5674C1CAF0167C4568D7ED8A9
+:102CF000038303561F8EDF66457BD2299ECF1E13AA
+:102D00008DCB9EB0624971D024513A7DC2EE75F9E7
+:102D1000449E532F4710CCB09CE4D3E57CEB708AE3
+:102D2000BF9DDC6C07925B38BF42FE96FAAC88E32D
+:102D3000F7CBF02F028117F71A5CAF6788FC05F11B
+:102D40009F4742BF16F721FB720CF167726053B1C7
+:102D5000FDFD3DF66D84BFEEF51E16F1B0CF9A472E
+:102D600073BC5BA713D9A7C5BD7F0C20DA2FDB4648
+:102D7000ED8B5F7EFF1D8ACFFDA63030D487ED0B33
+:102D8000CC7231C9C9C5A91D1CA72BF6C93C2FAEF1
+:102D900097F78B72AB117D7158EC88705CEF6CF11A
+:102DA000FB9EF6FFD9CD9D1BF3395E2D8F25B9A271
+:102DB000CF8BEB28A675E8FBD4D7111DA777FED1E2
+:102DC000E3D07AFDE387D60CD7F20837FA13E8E5AB
+:102DD000AB743AB6268EFBD768F88CC74FC18860B3
+:102DE00088E3796E703760FD5A0D4E9FCDC3FD703C
+:102DF0003C44194FF85D3CDBE92538EBE3F7CB8029
+:102E0000C053BDCC73C548FF1CA2BFDB82224FA0BC
+:102E1000B723FD893867730AD3EBE2E7DE7AE7E789
+:102E200038CBAD8F8E2924FDA1BF1F0F6784EF70B3
+:102E30005ACF0249E4CF10BE37D1F8F1F981F385BA
+:102E4000EB89EC4ED60B27B6FD2C44EB3B91056E7F
+:102E500013F2E3E27DBF7DD33496E8C41996B084C3
+:102E60005DC6F857BC9E7243E03A92237694236481
+:102E7000DFD8F5F7065A0CEF55672A77F9D81F55B2
+:102E8000EE2679645785BF362450C1F5E556E1AF8B
+:102E9000EDEA34CBC4DFBB2C10223DBEFCD50C9533
+:102EA000ECC7E56877B0A79317E4F54232FA41E939
+:102EB00009EC069357E6785C5A600DC14BFAD1D401
+:102EC000079FC889FAA3BABE2CD2F4BD927F6303D0
+:102ED0008DEFD3E281686772BCB314029A1DA1C55D
+:102EE000E19A0F701C4297DB3698EBA0F8CF9ABEA0
+:102EF0000B1CE41FCA382CC7D73CB3D3A0173B72B6
+:102F0000551D4ADA11D1BAB5073F5E3F1FC06BECC1
+:102F100047DB0512D6D07AD5814823FEDA3AEB7723
+:102F20005D2F60D932E691C84A6AFBE6B44476A4C4
+:102F300043B303B8E847EB14EFD906AEBEC384FA37
+:102F400033D96B81F763F4A00339FFFD3C6D5EB2AA
+:102F50000732BBDBFF4078EB691F17AB24F8BC6F6F
+:102F6000EDA5DDE6AD49240F12C28BC8C433FD18B0
+:102F7000D16332C4EC9BED9E98BA14072F89CAEE38
+:102F800076E57482FCE577DDD7AABAF0AB1F1AECC0
+:102F90008110AFDF6AF18317E9C9E6C176C3390C46
+:102FA00055CB7F220117C7ECEF1CF64576B955DBF0
+:102FB00097F522EF8BC6F5F7BBA4D7A75EE2EB0B24
+:102FC0005FE2F885EA4B1B7E4AF5A50D3FF5125FDF
+:102FD0005FF812C72FCCBEB4D7A7CCBEB4F1AB5E9E
+:102FE000E2EB0B5FE2F885AB2F6DF829575FDAF063
+:102FF000532FF1F5852F6DFCAA6C073ACB81CFCD0D
+:10300000A6379A4374CE46AA0A73DE3857058E4710
+:10301000A73603E72BB67B851FA5C7E947D2103239
+:10302000FA2D567716D9D1DB1BEFABFC318E732A04
+:1030300013174FF9FCEC230A8DB36D1A70FEC2D939
+:10304000F8D1518A7FE540D81BCEA1B89A04E11887
+:10305000BBF4FA600A8463FC896AA58FA15ED43947
+:10306000C0D0FF964D430CED37B78D36B4FFA8A9FD
+:10307000D050BF492D33F4B7434E4B1EE55D1B2D99
+:103080005ECA8359686FA567C20D76D8F83D05FF03
+:10309000911F9383167DF7B8B88F74D56618D7192A
+:1030A000D77EB67C407C3E614EB1964FE8FE7E41B5
+:1030B000BC0F6E4FC2B8A79E4FD0F139DC92C4F856
+:1030C0005AA78A7CD39A69C28F9C1A729B286FA9CF
+:1030D000E36FB44672FABEB7D519FDC9F446772539
+:1030E000FBA34DC0F9DCDC2A7348C9A138C1C04A32
+:1030F00007E239B443D04708047D841A81F385A1DF
+:10310000AADC95D47E2A047C0A46A78FD1550B678A
+:1031100052DCB53EBB5F16C51972AA043D2CDD6BAF
+:10312000A4034AE7D256D30F4BBCFEF4FA8C02CA72
+:10313000E79D819727049CF5F3E7E97170CFDB6188
+:10314000C44B3CDEBE2D5ED614C77F57F2EDF06255
+:103150009B2177A4519C540599E2322F660F373397
+:103160001C9ABC8C9F19D88DF830A70938DF134FF3
+:103170008FAD7510AE8AE1DF1C6F5821FC4C93F2C5
+:103180002B99CFF0DDFEC0A744195FDB9A44FE16F1
+:10319000CB641A1FF6CA0328AE105267F3BAB737CA
+:1031A000DB92E93CDF57F566A0F3F2DB73E40194B0
+:1031B00017DBFE8C696EECF920A40ABB3993F7612A
+:1031C0003797706911A5A2956011ED6189EA835660
+:1031D00098E3F0A94AD49E3E2339EEB962A2FE5B81
+:1031E0008A73193E694A86015FD61223BF23180FDE
+:1031F000E5A37C1C4CBFCB4457824E42AF4BA195FC
+:103200001C5FE932D510DD68E72DD257CD06CA47DD
+:10321000D567FF742ECBAF7A1BC31D5608BAD0F307
+:1032200082D6264187F1F4E3F21AE9C72A0D3489E0
+:10323000FC96E01F7D1DDB146DDE2C0954967BB6D9
+:1032400001C467D6B8F1EC243C49DE78045F3A61EA
+:1032500036D07BCE123BE7B1413ACAF8B74E00E810
+:1032600013734E217EBD675DE777A4F30FBF239DE7
+:10327000EBF267AD57933F45E25CE429A46B8A1FEC
+:103280004DADEA04FEFE0ADC26A247A4835959C5C7
+:103290007CF4817F76911CB213BCAAD3A8DDD5A99A
+:1032A0004C25FA9D2EBDA2B8709CB587059DA37EC6
+:1032B0007989EAADCD16A0732628674C3FA2794BD9
+:1032C000EDEE952479A481E369DD853E943B1447B6
+:1032D0007CC5282F8A3A8D70CB8D97EB3DC0B127E6
+:1032E0003D110F47D7040D8EC508C721DF1E8E364E
+:1032F000AFD0C3E92542CEBE98FD537ED57D589C04
+:10330000AB495780E1FA852AF4F274E97898E4CB66
+:103310003A05E50BB6CFD0DADD25429EE870CED572
+:10332000E0ACCB9375F32183F8DE4DF2C44970FD18
+:1033300088F5765B9180334084F39FA98AE09335CA
+:1033400056F0529CB6ADD4E9A57861AEA2C1B7499A
+:103350008397094C04DF78BA9421A68EEB4B8DAB92
+:103360007F5BF8964ED0F4643F283E1FF8AE4B4981
+:1033700015FC3654C0C7EA8CF0B9E6A61C8B77253D
+:10338000F275470EC21BDB9B5E17F0FEA5D67FD5FC
+:1033900018E07A53DFD5990CAF9C859944CF4DD670
+:1033A0003695F2584D3AFD69E7C25C9A9C9886FCC6
+:1033B000BD00DF5F8DF289F290A92501078DD794BA
+:1033C0006F0189F7BFD99B68FF0E9FCD20072FABF8
+:1033D00031C235250E8E49DF91FF7F3CE1BBF1FF05
+:1033E00076FA15FBAD1906D0C979C89083E0642B35
+:1033F00099984C74D4D2BA9DEB32849A7271FF0FB3
+:103400003B85FDD5D23ABBD7F351214D2E6CA97324
+:1034100070795F9D9BCBB6BA4C2EEFA993D97E698C
+:10342000ADCBE3B2A5CECB65535D0997ABEA14EE05
+:1034300027ADCDA860395C051CCF5E99F239E7DF76
+:10344000E3E7CB518D7A6C706DB201EE7D6618F5B5
+:1034500055BA62D457748E29B6DDE51D65684FC92B
+:103460002B30D493E48986FE5326047E3981E48090
+:10347000A7324E0F223F8E899EB36B6915DF4BE951
+:10348000F0D3F59353E3F33556EF00CA3B395B05B0
+:103490009F366B765E13C111CB6405F8DC8CEDB002
+:1034A000E40D01F1FF6AA6F38771EEFE488B1DD98A
+:1034B000D7286427B4C8C28EB78238F76BCBF4879D
+:1034C0006BF07912EA2FCAEBDAE6A6B05C78D8E3A3
+:1034D000F4D239DB96D6656E5E8F579CA771E3BF39
+:1034E000447980F8F3358EA1C67339D6B39C6FFC4E
+:1034F000754FF4DA9491508E9C2167BBF32FEF6BDC
+:103500007429F22FF778043CED3DC8A3D6387BD957
+:10351000A9E55F60A02F61FFA83D25F20BAD717199
+:103520007BF4C312E66FDE9A2071FF3F4F9085BF98
+:10353000660903C96B9717DF8FF53B14F17DE8B976
+:10354000CE8F3F3E4F8C7C0A2407FE3C019F2B4FC1
+:10355000083B254916DFA1D84051583E81C887D085
+:10356000591FD237A95ABEA75BCE908888A13BE7E6
+:1035700019FEAEC88BD06716443F96E8FB17C4BF50
+:10358000FDB66523F9C3C37A69A7FC5002B9E02AE6
+:10359000D1BF1F832E4F3180EEBA23FC5C2589E119
+:1035A000172678359AD6CDC8C5E7A95E8B173100A6
+:1035B0001525F25E3A5FB14A4965FDBEAA446E2701
+:1035C000FEF942717A091FADF955ACAC93867DC8FE
+:1035D000A2B7B1C4C676BA8E87246D5E444F679594
+:1035E0000E67ECEFCC9B11ADE37FCD6336725EAF1F
+:1035F000E5AA4738DFD732EB3F38DFB73A6B7A1EA0
+:10360000C9BDA492E9C7F82097861F660DD2237919
+:10361000C6FCDEE9D3A2CE70A0F8849607048F31F1
+:10362000CF6791FD86F92F349E60A0D0436051F89A
+:103630007B8333E95BF0B5DEAF673E50F5EF4E5765
+:10364000D2F9E0268F90A34DE07D3340F55724AFAB
+:103650002AD3F38237E9BCE9EA8116C6CBEACCD992
+:103660004DC28E177E53936725E76DE3F5369DD7E0
+:103670008C95DB745E3356BE37C9B37BD5CB59010D
+:10368000739CDE37BE9F1D34EA1FFDBDA4CC2B5FAB
+:10369000AB8A392FD56CF13B485EACF2DC678AD53A
+:1036A000730F2881052531E793AC99B3F83D7BB6BC
+:1036B0002FE1BAAE50948544DFB8FF5EED81F59AF4
+:1036C0005CDCA8E997B3ED7393D6FF01ADFF66D23A
+:1036D000EB23A2F8193EF4F26496CFEB441C8379F5
+:1036E00020665EA524B082D615C5AB390A17A4D3CF
+:1036F000E1F957B0DDD1B06E7632E169E7FADED795
+:10370000A3E7D5F57E7A1E353EBF6EF3980DF0DF48
+:10371000A3C985175C0B2B1F40D0EC6C13F4D4B0FD
+:103720004EE891E14F887D9C4987C6F5EE6CEBDD54
+:103730000E8AEF4F91C56E3AE17A465C7D405CFFA0
+:10374000DCB8F65171ED0571F58971FD2BE3EA578F
+:10375000C4F59F1D57BF36AEFF82B8F6DBE2DA979D
+:10376000C5D5FFCD884FDFB56989E0188F3FBDDF34
+:10377000B9E2EF5D5FC57EA2A3E13083E945A7B75B
+:1037800073C543D4DEF5339DD94A46B17CDF81F65B
+:1037900015D9433BDB2ADDE27C4760E56E8D3E4870
+:1037A0003F58368879D0CE4AE6F89CD36390236799
+:1037B000C3B709328CEDB17668EE85C7F7D9E93326
+:1037C000A4D917BDAF5BE7E32913FC27490E414895
+:1037D000F899BA5DBB4D15FCB34D5D50B99EE46DD3
+:1037E0009359C49FB5FB50E86E1D11270F684A38E6
+:1037F000C2F18426CD4F68D3E4C95A4D9EDCADF9A1
+:10380000094943839B28EE9B7C988FE740B3AFE048
+:10381000AF0B103FF797166FA3EFC7EE1E53F2F8EA
+:10382000C35877FD5D827021DAE9635B14B259DA1F
+:10383000948C243A4F946272B4939FB8AAB0CD3F4F
+:1038400014FBADDD7FACFD79C4B39C69F3A2CE0758
+:10385000D9D265227A837C2F7F9786EB54C9C6B272
+:103860009677D5253A77BAF60AB7898CB0F419B2AB
+:1038700099CE11F79910E85B8AF018DC046605EB25
+:10388000196A98CFE25C532A0BFFEA196428DE6FAD
+:103890005716C1EBAB66DB7EAAF68C0F90B438DD11
+:1038A0007995FA38698234E887E38EB245ABAB8FFD
+:1038B0006CA6F3D04E49D4A73CF3F8FC95F9D1FAA5
+:1038C00098671E1FB812DB5B0B0799489EA67B52B8
+:1038D00013DE137375A9909FDB9B170E4EE48FE9DF
+:1038E000A53C13383021E76B25D1D4042C876AA579
+:1038F000AC3DCF14F52B35B8C9B55ABB4794177AF0
+:103900009EF8F1E794BA753B7B809F8D6CC877F683
+:1039100033D88B5797F6622FA279CCF1DAAD56796E
+:10392000009D23DCDA6C03BAFF616B3688EF905799
+:10393000D9F8DC2858DC03AE7145D71D5AD56F1E67
+:10394000D14DC80486386EA6065FFB4493768EF28E
+:103950009B307DC7B755CBF36C8588DB9D1F8BE70C
+:103960005FCD27BCEA78DE57FAAFCD449F1DD90B57
+:103970002B37E27BEB1ACD1C3759D798CB744EE32B
+:10398000907D746AC52133D9ADF9D06E263B7F1482
+:103990007D793D84AE400A70D9AEC9E7FFD4FCF80A
+:1039A00061A0F0F341D0C5C0F9B438F01382CB1058
+:1039B000126D12F18FDBE4C07996EC4BAF48A4B7DF
+:1039C000EB4AF5EF7AA1C652ACF91732C3B78EF8BD
+:1039D000281EBE74429FE38E8ABF9EDA9D7B5F0DD8
+:1039E0005F86D5DD6F18E993F0363B46CF6CD4E0A7
+:1039F000E7F6FA15C2E1B5C581167A7FC9A6BF1EE2
+:103A0000207354565533BDFF14E11D9F2F0C07A79B
+:103A1000D33063BCE14AEA3FBA76DB7E8AA7E5058C
+:103A2000EFA8EC8FEB1BAE54577A888694C0FD3418
+:103A3000CED0CE48850BEBCE4DAF86B3783D6379C3
+:103A4000BC5C7D3D480FD54C476E11C7D7F04BF895
+:103A5000A773CB0B370BF8607B16EFCFE2CE8A5DF6
+:103A6000FFB669FDF8BB8578BA68D5E0F758148EC3
+:103A70006035FA358F2582A34EA73A3C6E78A26B4B
+:103A800015E53AE7873A5F2439E8DFE49EC6F2B0ED
+:103A900038F024BDEF6BF337701E7057275D47D4A5
+:103AA0000D1FA7D249D7BB603FE569C2FBD615EF12
+:103AB0005772BC782F88B8589C3ED44BAB129F6786
+:103AC00010F7E58CDB6BB493915E958D9E587A353B
+:103AD00073BE33A4E9935013D22FCDB742D06F48B1
+:103AE0005DE64E44678F687A658746B7FAF3A13D75
+:103AF0009CBB3C54DAED27664A46781EEA8DEFD32C
+:103B0000C0CBFC807C7084FA65101F607DF00A37A2
+:103B1000D3A7CE074BF6FEF500DD67E3F4C905B188
+:103B2000F7D745343C227DBE43EF2FD9D475807C36
+:103B3000C5C12B047D7E4C77871545E90CFDC7F781
+:103B4000A89F4E3FF1FB78571B4F2EF67F4C785CB9
+:103B5000B829C8E321FF1C2BE5713AC349CC724A4E
+:103B600025ED676B1BB8693FF65F1474905C3855A0
+:103B70006B62B8DE981F5E65C6F2FAA160A5EB869F
+:103B8000AA33916C72298F6BCCFF0D6B33E20FE976
+:103B9000E76F344F91276013C1EBA08DE5690F7477
+:103BA00011D57BAA0EFF157172D73CB1177A3ED79B
+:103BB00071D7162B8E8945DF621DE7D84F8F379D51
+:103BC000193F1DC5FE434BD36CFD9CF00CBA8F67AB
+:103BD0003BC54F11AEAB9A7AB7572F58FCB4F9A436
+:103BE000889FAE008E03AD4C196B4A44379740FC5A
+:103BF00074CAC444F1D3C87B063B735593900B3A07
+:103C0000FC86578D4C16792948A57C891E1FD3F751
+:103C100075B7664F3669706B21B8313C05DCDA0840
+:103C20006E0C4F1D6E33843F425F8853BCD66316C3
+:103C300079B1910B3651BEE054A6C893D767DB44E7
+:103C40007B8EC82F9C411F9931F634F2C19A667160
+:103C50009F08BECF79B517B30F3886509E33D3CCAB
+:103C600071DAED9EFB6AB6733D99F9CF0A6A5B1E65
+:103C7000CE3BFCC3B9EA027A5E62E773F27A3EA7F2
+:103C8000A5AFC8E7B8F2B47C4EDC7C76B8A9B28D9B
+:103C9000E6CB137E4B8F74ECD3F2115A1E2823DF30
+:103CA00098AF70C4E52BE2F3956B9A17ECDF2EE228
+:103CB0002B2C9F87FF7824FB63F1F3B8671AFDB7BD
+:103CC0003523753FEA1147A2EF1852AB8CF4D8A206
+:103CD000E1BBA1AFC8479C6D7C284F36F8552D79C4
+:103CE000E71647D0FB911FEA4ED03FDE0F3D1FFF86
+:103CF000D6CDE31BEF074CE0DF6E99C8F11441DF2E
+:103D00006B9AC5FEBBE3699A5FA59F3FD2C7B16AB4
+:103D10007E1CD773A2724ACF870D75DB985E876AC7
+:103D2000F74535FC7B4A68650EE5D76675513E72EE
+:103D3000E80E89F3EE439D7ECE43746C98CEF9F184
+:103D4000BEC981A727C6C49F76B87E9AC9F9022D3D
+:103D5000DECFF7E6A0DE53D715762A64EF8E04BED9
+:103D60006727392E1F107F3F4E7C7D4E99D0C39917
+:103D7000D741C27B4F3E9F28DACFF4DFAF6038A136
+:103D8000BF9B2CE4ADA2D7FFBFE4A976B61DE2EF3E
+:103D90007D4EF94093B3FF0997A29C3D5112389E86
+:103DA00050CE5ABA58CE8627289F919E5C4E177DDA
+:103DB000101E6E4C7C3F8F5C76A9E2E16981877CA6
+:103DC0001D0FF75C92F942C4437659223CA05F452F
+:103DD000F06AF32983A85D29510653D98D8F1F26D8
+:103DE000E68B5965C2EEBB58F858A7E1E35EC207FF
+:103DF000C769642D4E93C7CF9B357CAC39031FEF49
+:103E00000B7C94E8F878EEBCF09151956168779757
+:103E10001BF191EACB35D49DF9467C240F2D308CD3
+:103E2000B7BC4C16F7240D9C68E877263E8CFEC084
+:103E30009DF45E2FF6E8C04067057D4B34606E7BD5
+:103E400007C9E64C7F5B0595FA3E37C7F9737AB927
+:103E50005CC35FE6D4C4F85DA0F15BC644E526030D
+:103E60003D7C2F317FD668FD979728B794C5F2F334
+:103E70009589FB2FD1FADF3641591CDB1F7FD64BCA
+:103E800031F6784FFB0E242BCBCB78FD224FB6A317
+:103E90003E95F3663B92E476CA57ABF54EC3BD75CB
+:103EA00083E937AC67FEE89B0E95CED9D13D4168DA
+:103EB000596DBBA35FEE1A6CDA96317C25C1B1A9AE
+:103EC0006C88B8BF7591FF6DCAEF28EA09ED1CD266
+:103ED0007CBEEFC814EE63A27BB2C09D714EF92385
+:103EE0009467E25EB7C120BE238620EB41C90FE98B
+:103EF000F4DDB205FC225F4EFDC5F785BCF9140860
+:103F000073DD0511AEA7697EDE0365393C6E3AC8E4
+:103F1000260124AF89E4A8CEA70E4F90E9DF53EB2A
+:103F200036AD245FCE0250467EA073207FCF0B9526
+:103F3000A0523ECB040EB6334DEB0F7CCD793AFD4B
+:103F4000FBC397FB88EF0FCF717FE7DAAF91EEE508
+:103F5000F344EFE56BD4EC01FD5E3EB532C8DF976C
+:103F6000AB2BEDEE06CF99DF973F3A31B08BF0FDEA
+:103F7000B7A4412191640E4E98EDBAA0E3872FF2C9
+:103F8000F8AF5CE4F1DFEC6DFCBBE9D752CAEBF9AA
+:103F90008F123F37B88AD9EED4CB78BC5DA12811F7
+:103FA000EA27395E1BF0619FA83DE73C6A627FA863
+:103FB000C124CE9FA9EF99D8EE827C41074E19F219
+:103FC00072C645C7717A838345DC49C45FEAFF74D2
+:103FD000D708B2BF7F99322B9286E31D7C55D87FDC
+:103FE00096A991CD74BF73FF349B773BF2DD3DDA28
+:103FF0007AEDA513EEBD137FBD798A90172E8BF74E
+:10400000F2023EB7343342F6A3ABD82253AEC01906
+:1040100097D76CB5B42553BCB275C77D15A3B0FB5B
+:1040200063752FB91B137CEFE9D4F29A23A5C472F0
+:10403000F09F939244DCCB67BC4FD85AAE9D2B497E
+:104040008554B2232DFF52D2129D07D04B7DFE2204
+:104050004FA48ABEBF8ED0256E88E7A292EAA464E0
+:104060000F9F8BE824F8567AC30EB27F1F5F10BCF7
+:1040700035F6FBD3D61270911DEF9B22CEC36E5046
+:104080002417DDAFF160C4C2F78E3FB8E8E9E6144B
+:10409000ACEF3D6A76133C5AFDEF3993B1FE388E92
+:1040A0004BF2EEE00E71CE529D0FA16108BF56F2A9
+:1040B0002AB1BE5B11E7B2D9212BD6AEEA43F8FF95
+:1040C00075725F016F0856D3BD9DEB5226F37D9646
+:1040D000D973443C78BA74B483DE7FB0C4CEF81B85
+:1040E000A29DD331A9D57C9F65DFF9C6733A0F2E07
+:1040F000EF5409BFEE52BB5BE5F3974ED7587CDF18
+:10410000F5A8192456715D3CF974C929D6E5157EC8
+:10411000EEE37258A5FB8EFBE27BF56EBE35D170E7
+:104120001E68F726E19FA68D777A91D271BD71E75F
+:1041300085F475B5E1BAE8DE63D7508E4764CC31BB
+:10414000AE2F2DCE6F70C6D5A79677DFE3339CF0E8
+:10415000FD85FFA785AF71AB574EE47FB6D64167AB
+:1041600055CCB904670F71C09AC982AE6D592F380A
+:10417000C84EF9C27FC4433878E59F073EBC97CA52
+:104180007FFD6ED75284CFEFBF7E73C793B4BFDA83
+:10419000BB0F11BDEAFE189FC1C4F5BC586D63B8D2
+:1041A000F96768E7397D1D2F587DDCCEF9A5B5FB91
+:1041B00093B87D64398492B07DA445C9BA99E8AEBC
+:1041C00053F2D6CB3488388FA8E37FED0D7E138C65
+:1041D000213CFA25BA0F639A76BE76C3229009FF76
+:1041E000B645ED7C5EDDB75C9C57F729D5497CDE92
+:1041F000748E99CF87D4575F73F930ACEFBA5CDC1B
+:104200004F3563B9328FE75704BDA475169B9713DA
+:104210005D6689FB9AF4F3A645D0C5DF7F8CF4B6C2
+:1042200077D848DECC4700D3FA5A357C69718322AF
+:104230005FA74AF6A4CB6BC463461CDEE2F1BA4228
+:10424000C7E34818497894A12D99F4E14300ED742F
+:10425000AFC086E54FCFA3F36C5FA8690CAF9EF8A3
+:10426000F91DB4579511740F8B83CB4EB457A9DC4D
+:1042700085F62A95AE60C575CB71DD7BDE38F8D248
+:104280000F71BA594AF5957444AB48CB7B81BA7427
+:104290005025AEFF06E25E51DF4289C4777D92A1D0
+:1042A000BED66389FE3D00FCD595A5FF7D80D35B1E
+:1042B00094A108964C8B968F11F559E487C4B4EFFE
+:1042C0009E69EC5FB63F66FC81B8DEC5366E0FEDC9
+:1042D0005BBA45B5C4B43F87F572805735FBF1FA38
+:1042E0009D66FFF604F2EDDD7261475AFE052AC9AC
+:1042F000B52FD14E23FF5E322B2CDF21D72227BAD8
+:10430000570F00E561AC5F2E1BE5EBE51A5F58FC2B
+:1043100015A0E5C7E01B3DFE803F7BFE388BEF63B9
+:104320005A35C4C2F70FA13EF0F696AFB3782C9F72
+:10433000C6DEDBF5AC2EBF87C1309AFF4B28FF43AA
+:1043400005F341CCBD0DC4F76DCF5FB614E7F11D89
+:104350004DE638AAE45A9FC2F731D535B13C7F40CB
+:1043600009FCB63CE67C4963FAC242922FFA3999BD
+:10437000E8BD47D798BFCDBDF71DD50780F4C297DC
+:10438000485AF65EE8B0B16EEF115AC7EABA762E17
+:104390009D6E85858DDD12E4B8CF154AE04FB43EA1
+:1043A0007B26B6C7F089D58DEF19FC0EE37D9CB254
+:1043B0003BE224B86F28F9C049F3B71E167CBDE173
+:1043C000F0EC24E2BB56EFA124E29B2FE8E2C7EF1A
+:1043D000C0273EE5559661BBDF48BD9EE8674F4369
+:1043E0001ADB150797DF7F2DF1CF8DBFF801C3BB17
+:1043F0009B6FE0E14195CE18BE818799AEBBF9462F
+:10440000ABF7CC377F67BEDADDCD37A2EECB074303
+:10441000FDE04C63FF6EBEA0F1912F1EAFB073BBE9
+:104420007DD2C35BD418BE3A49F558BEF909F24DA6
+:1044300002B93F7D9246DF17986F522E32DF0C9DF6
+:10444000A4C9CFEFCE3763275D14BED9633A1FBE30
+:10445000B9EC4CBEA99AD4F7DBF34DAB3BCCE7E902
+:104460005AE79813FE7D900F347939757EA0B28D8E
+:10447000EC1A45DCDF374D9A99E5F3109F497487B4
+:1044800034EA4FA1CF0F5EDFFD7D06EB67FDFEF541
+:10449000F58450B293160BBAE9AC1371DF6952F987
+:1044A000B4C5A477E93B024A3553F694EC02D4FB39
+:1044B00032D985D05EE1C179365499A04DA62D0739
+:1044C000AB87F1F861B6CF8668717FA7942FBE677E
+:1044D0009A29FEEE85FE5D4CB562BC5FB6FF59ECD5
+:1044E000265C770AF931EE12F17750164D8AD7BF64
+:1044F0006887E0FA3A07DA984E362857F71A273ACB
+:10450000E35CB52F98302FF9D6249376CFBEF233E3
+:10451000A2B3DD6F6C49A673127B24E0F339F383F9
+:104520004FCD23BE73A942DEB4AEF833A52361D7C5
+:10453000B41F1AF5347C6AD4D3F0A9514F6BF51E21
+:10454000E58D7AC2A8A7B57AB79ED6EADD7A5AABCE
+:1045500047E5CDA7063DBD61D2A70679F31ED5CFAD
+:10456000414F1F9E7471F4F4A88B2C6F9EBE70F2A5
+:1045700066DFA4BE1743DE1C392F79937DA6BC39B4
+:10458000743EF2C6B5B943A5F4CCC21EF8A056C31A
+:10459000FB5B65CADB343E949C5BBC269EBE3AAA9C
+:1045A00017AEA6BF2BF3A557F87F3DBDEFAAFDD5EB
+:1045B00091C6183FDC65E914DF23D4EEE1E7B76C60
+:1045C0007E95E3B1675D2F5D105A74A65E45BBC84A
+:1045D000C1F4EB35732EFC7CD7D13A47F0DB95CF95
+:1045E000DEC1FC945C6E9C4FB77F3BAA6D669EAFAC
+:1045F00044C8E99EECA19EE6FDA05C16F7FFC5CD80
+:104600001F4FBF489FE9938B981E2D742FF8179D5D
+:10461000C07FA7EABF4E6EFCBF8A7C49E9C51193F3
+:10462000CF834EA76BF84CB06FEFC5DDF705E3CF36
+:10463000E993CFC38E3E4CFBEE9B70DFDF67385EA5
+:10464000B47D5F30FFE1E6F3C1F7BBE5DDFBE6EFEC
+:104650005132B47D6FF8E735EF515C63C3BFAE7D77
+:104660008AE21AF77D9DB78DE21AFABD726910FDD4
+:1046700091F5EF8F102E2EBFF89E24634ECC774518
+:10468000C0FE7DF4BB13B2377CDDEDFF2BF7CA9182
+:104690007DD2DBBD72AD36635C4F2FAF2A17F64A71
+:1046A000AB691DC72336A05F558F78EB9823E211C5
+:1046B000AD68A7B0DC9953D0AB7DB4AB4EE1B85335
+:1046C0006B9D9FCB7BEB6670B9EBB5256524777D41
+:1046D000AF2D62BDE7F3FAAF7B1881E4AEF8D049A5
+:1046E000CFEFF5E8FE90B05FD2C87EC1FAC393D792
+:1046F0006F8D8D0B8CFAEFE15BD481D178555B66C1
+:104700008CDD23C7FA51A012B944FD28AC1BEC9AEA
+:1047100011EC47ED26BB06EBED934718EC1A7D9E96
+:10472000B566A821BB66ED0EF38C4476CDACF2C421
+:104730007E14D6390FE27039F8FB7F49FBFB5F51DD
+:104740007EE9DDAEC99D7271ED9ADF4FBE30F18713
+:104750006E3ED6EC990714E50D4DAE7C47F9B1D10C
+:104760004CF1E36F2B3F4692FCC837C88FCFCE4742
+:104770007ECC2A771BE2A20765B5CF58B2D37798D3
+:10478000A15ED6F42FD63BD1AF31219C7E5221B110
+:104790009FB3C10BFCF7FDA64BF35F267AD8BDC8CB
+:1047A000CCDFBB3FA88873220FCD11E7A91E5E5E48
+:1047B000309B3E235A9772C3DD4914D72E17F70456
+:1047C0004C97CA39CEFDE00C61E7643BDB2FA7FDB7
+:1047D0001FACB000D1D5D9E2DC146EE778B5E6475E
+:1047E00081B499FD0ED70F2D6E3AAF1A1FBF769682
+:1047F0007CCCDFCD83F40A7FDF7DB6F8F5B78D5B27
+:104800000F98F29DE3D6CC8F35CF0DBF41759E49F1
+:104810009F4726CBE25C620F7A2C9E9F3BAAA7A7FC
+:10482000457A3917E524FB29E61E59FD7BD659E563
+:10483000621E27D94F8551BAE8A82EEEF55EDA94AC
+:10484000DA678EC4E685522CED3C5E4AED3E7EBEB4
+:104850009ECE2F90CCB27859AE3E5E89F239C178A7
+:10486000FBEA8287092EBFAEAB3D4C71EA49964EFA
+:1048700089FE9EEBDE3A95EB7BEA9AB8DC55D7C60B
+:10488000FDD6D76DE2F2BEBA103FBFB7EE31AEDF54
+:104890005DD7CEF5C773C53C132D211E6752178E09
+:1048A0001FC30F659FE03C31782E8DA886F6096FF7
+:1048B0003619DA8B3ADB0CF5BEFE4D86FE7D66843A
+:1048C0000CED6F950502538AE85CC363867ECEFCCF
+:1048D0007643FD5CFD850BDD6F654AAAE51FC8AF19
+:1048E0008302484F4867E9B5B2CA79F31AC197FD08
+:1048F0006BBD61AA6F71D998BF75BAE433CB26B18D
+:104900007E53CC3DB51D2E717EB2A1AF88A734FC7D
+:104910004CD4B76489F391C3AB447EA461A0B8972B
+:1049200044CFC36F7169F793F8C43D1A83F223FC37
+:10493000DDED20EDEFC139CB45FECC0D6ECECF378E
+:10494000D481F67D6284F31D1960F68AFBD5159932
+:10495000FF9E920542F5385F43BE5BBD85E44C3057
+:10496000D56BF6F29F960D99298F48E2899330ED29
+:104970009ADED1F2F2491F009F3BE886CFE7E27B47
+:1049800084DA2EBEB7A97F6D17E7E3B6FC42DC637D
+:10499000130FD78E5F7CC5F72A6DFDD95759C4D444
+:1049A0005BBBCFED7425C57E8FB6A52695EF5BD892
+:1049B0005A9BCBE728B6D688EF8D6510FBDDB2C8D1
+:1049C000C6E730B6D69ACD24274F2DB2305CF4F529
+:1049D000C7CFAB7FBFB94E3BD773AF76AE67AD766F
+:1049E000CEEA6EED5C4FB376CE6A8D763E76159D3F
+:1049F000EBB1133CC5B99EADB50B14ED3CAB7E2FAE
+:104A000003C35742F8F2772A56D86B1A07F4870C7B
+:104A1000196EF1DFC7665425C79DE7319EB74AF589
+:104A20000D30D49DF9C6F356C9434719CFA90E34AA
+:104A30009EEFB1798CE77A2CCE4AE3F9D058FA444C
+:104A4000609A566CAC27FC77FF7D477AD88FFF7E43
+:104A50005C37FD86F47340129D4349637ACDAC12F6
+:104A6000F499A17D0FE3864E2E53915EA874529E59
+:104A70005DA273902AD351F4FB37A5577A3ADFBF72
+:104A80000720AD4CFCF700F473087FD1ECA8A553C8
+:104A9000944FA71445E7BB7F8A723CB6AE973DC9D9
+:104AA00085FFADF2FF01C18CE32B00800000000008
+:104AB0001F8B080000000000000BB555CF4B1B41B9
+:104AC00014FEB2BBD144A35934B6865A481A520DCB
+:104AD000A4B06D37A225D2D5869283C8163C78E85B
+:104AE00021879CFAE358E86D635B904A24A9422F22
+:104AF00052C8C11E0A821EFC03621B7A8E680B52CA
+:104B000029C18AE7405B7A11D23793AC899BC47A7A
+:104B1000E940F2F266E6FDF8BEF7E6E50D68798158
+:104B200090A2DD137D40245A2A3848065468B930D3
+:104B3000305324E9A2FDB5AA94359114C0A9095CAB
+:104B40009ABA1E2F4912D9C9163BFDD4CECEEF8D8D
+:104B500031BB0126252EAF1F39000FB015B3E51666
+:104B6000FDC0C20E9DABC0EF315B0E7E96DC49A549
+:104B700032CA4D01917D69BDDE4BC02CFB49F17AF3
+:104B8000C73D0309F29F3180FC30BBF3D0CD745791
+:104B9000343BE5A33C427B4548E42F5284DC078646
+:104BA000AFAC81F6E7AFDE17258AFB6109B84CFB95
+:104BB0000BF652EC11DDDB1AEF945F28CCCFB4FD7D
+:104BC000299DCF5C1121325DB71F962855D860AB67
+:104BD0005C237EA25255A755A1CF0334E894F70C6D
+:104BE000D347EABAFB243029535ECF0FFC1B8591D3
+:104BF000BA5D805261FBB7B51ECF71376D8410AAC4
+:104C000088751C15B6EE36CB3F866FA360673821DA
+:104C100030BED43D21E7A738BD5F96BB183EB1A892
+:104C20008B25B2478C508F13CE3DDD8D73FC7D6795
+:104C3000FC7502078683CBA22173B9650C72796C6F
+:104C4000F8B83C3246B83C34142E4BC61897408A0C
+:104C5000D7B3D3061E2F63C47763C1F6F1645B59E3
+:104C60006775C78484F7ACCE432AB76BBA17253F64
+:104C70000D7C115DBC190A3D6F2799FDBB27028F82
+:104C8000B91ADDF4EAE166FBD56753E7E24E1B7320
+:104C9000BBAFECEDCF5D1D486CB6F0FBB2D6C740A4
+:104CA00096E711880B58A43CBC0EC529D3FDF4B679
+:104CB00093F7754871E49C0CDF9A0B3F4C1CD43F72
+:104CC000CB696A19829CD524997AEAD46F8F42F90C
+:104CD00034F45560FAE320AB677A223FA8138ED5EF
+:104CE0009B9FE786C92EB5232288E6BC5E6B369E65
+:104CF00097892B202982DC027F3B5C8F6BF618F2B0
+:104D0000F0B960E5DF7ADFAC3BADB4345A7BA2B4D6
+:104D1000125D898C4675D2D66D9C07A70FFC7D77F6
+:104D200040CB33BC17C80FB8433CE7238994AB9EF4
+:104D30004FBB3A997974D7FACF9B2C3B12846FF909
+:104D40001F7DD8672F3A58BD9692423CD7228FF5E7
+:104D5000DA9C5B526F39D97B44B8751EFD716B9F2D
+:104D600056F35991C83F9B4F2AF96FC1F737C67761
+:104D7000B59FF745AA6B46137CAC9FFB891B8D4200
+:104D8000F547904B116FD9A8A0E4E9FC97DAA17020
+:104D9000F796F9D0145F6DE8A36BCD73675B73551D
+:104DA000E74D1041366F7E0ECDBAF32DEA6B4A9374
+:104DB0004773EE34F358AEE24C567122DCFA3DD71D
+:104DC000EB355F1BEA488867FBE6EB797DD38E7F86
+:104DD0006B1FAC2475779EFE1FF0691FBE1B8C8F66
+:104DE000B3EFAF1D6F569E8EFF334FD6F3A23957E8
+:104DF0002E88F3A2F74CFD2FDBA790A6F00700004A
+:104E000000000000000000001F8B080000000000F0
+:104E1000000BFB51CFC0F0030977F3A0F2BFA3F161
+:104E2000D7F3A3F2CBB851F99E68FC2634FDE7D145
+:104E3000E4591820B4233BAA38B158988381410E15
+:104E400088353950C5F3A1E6D6002DE807E215AC48
+:104E500084CDFA2C05748F1C03C32920DD00C4D730
+:104E6000651918D8817C216906065F204E00E2CFC3
+:104E7000320C0CB380F43B20DE2A0DD1C707143B63
+:104E800027439EFBBB85C8D3378AA9831F28A1F27D
+:104E900067683330DCD66160D0D683F0AF20C9BB01
+:104EA00003C5666A43D831AA0C0C877419184E28BA
+:104EB00061373716287F18281FAB87DF7E572354AA
+:104EC000FE2E6B54FE4F4354FE134F547E9F372AE1
+:104ED000BFD107420300BDE0D98DD8030000000018
+:104EE00000000000000000001F8B08000000000010
+:104EF000000BCD7D0D7C15D595F8998F376FDE674A
+:104F000026C90B3C20C02404891AE8000182224EE5
+:104F100042B0C14DF181546997EA93B53622C81366
+:104F2000B1A6AE6D26DFE1AB8DE85656AD3E586DAD
+:104F3000A9D51A2D6D6957DB04D0C52D8548A9B5B3
+:104F40002DFB6F50575B16D9E816755D5AFEF79C1E
+:104F50003B93CC3C5E3EECC7CFC6ED0E77E67E9C25
+:104F60007BEE39E79EAF7B9F220640BF1CE01CFE14
+:104F7000B1E7452200CC197C462BA0542E07D8243B
+:104F8000048D70117BFE415AD91566DFC08A2F9FB0
+:104F90003ED8EE5A10A8FEF3456DF13EF6BD63EA29
+:104FA00057E350C6EA4F14A8BE53CF79DE0812402B
+:104FB000014049E76A35C1FAD934AE49C5FA1DFA4C
+:104FC000F695C0C63B53A28084E315656FDFD6001B
+:104FD000D03D0DE072D8AA16C758F998646C866C5B
+:104FE000E314D1384ED91F17A1BB14E8EF1CFBDF27
+:104FF000A62F2621C1C66D9DFAD59508B7D27D335F
+:10500000E811803BC6254167EF678248F3522A2C9E
+:10501000305959D5ADB835FDFC713A102F65D86BB4
+:10502000677C7964F0FD32072F0C1F197801B804F2
+:10503000408359DD16960340ED33FB35EDF1B5F8AD
+:10504000E8C63F7FFE7CFC19A0131E40ED8C272292
+:1050500083F06CF2F5774B0CDF5611188FB12A39BB
+:105060006C9C4A573F99E30DCC53EEF4ACFF74842B
+:10507000B380E621C8AEFE32E1996BD79BCB668E3A
+:105080004F675E390BF83823F57F25A2B800EB7720
+:10509000C6AD888B1E65CB83F7A05D5F33BDF586FB
+:1050A000C24F08F13307F163C5911E1D3A96C27ACB
+:1050B000630D9B4F8105FD522E918D096300F2F126
+:1050C0005FAC89ACE99548AF634C56977D1F1BB325
+:1050D0001A25F67EDC82B420B367041ED2DE0801F6
+:1050E0004253728E1A599CEEBB6677F431BA3D0377
+:1050F00091CECDECD92CB37E116FC723E9C71848E8
+:105100008D97A51EE963E588254353398D4B7C783F
+:10511000A77491B19991F4669BFE3B1A547AB63507
+:1051200068D0ED07686988D3F3FED097BE81FDD7BC
+:105130005B7ECDCF9E72D7ED4F61B9192081E345DB
+:1051400062BC7F9055ED310DCB6022DE2325FCF94A
+:1051500012E285C1F9558649C4CB0F6D3CE9D04DAB
+:10516000FCDA6C2CCF812CF8749EA1522F9F05F491
+:10517000206B3958F6C7F33C659F36DE531FA0906D
+:10518000F04665262AEA042E8F22722F180827C3BC
+:105190005756B960CB15499AD9DFCDE6179EA718A7
+:1051A000BB58D36D8297BFC6099C3ECA04959E31F9
+:1051B000E8DF7F0EF16288E9CD6CACE0CCE2AEEEC8
+:1051C000188EA91853D93A067D692D2F0B7F41B946
+:1051D0007CAACF81BBF8A3C78F24F5A41259C6FDC2
+:1051E000BDBD7E979F3DA222FFAB33C544BA0CE103
+:1051F000B5126CF2B05597459CF74707F7F0EB7581
+:10520000C2E6E73650A9BE8CEB553EB85E1D065B84
+:105210002FE49F72BE5E1DB2A58E66BD1E07F0E034
+:10522000253480972E8E97B28F182FCDFB5626B23D
+:10523000CCA3CD5E4F190CA394F0A0E808E7D646A6
+:105240004EB716A3DB6CF277283C4839C7E3C9B2E6
+:10525000F3F17E8DC0C75964F38983A74D865893B7
+:105260000E239E3A6B506E6D2D1145944B1F159E6B
+:105270001CB8360FC095E670957EB47049A1EE95C6
+:10528000D9F8B12D831FB720DC9CEE6A38DD891F69
+:1052900029DD397005901FF83A27F83ACB7F13EBD8
+:1052A000DC36B0CE49BECEF18F669D9DFD1C5463A9
+:1052B00025AE5B9DC6F890C1718B642937E0FE1A5C
+:1052C00012E03183D101C23F8EE999E1A697751DA5
+:1052D000E03E21C0F50D69554ED2056F9DCC749608
+:1052E00059F87EEB05C961E601695F7F9F0327E3FB
+:1052F000DFFAE38DED075C707E5188C408CE79300B
+:105300000FE17C27BC3CA71B86EEEF6483DA28FB09
+:1053100000DE6BB0DA0FF8CEFF7E8B04A96CFAE5E5
+:1053200083B65C00B54BA1F9DFCD787026E2E1824F
+:105330006A88B2F508378DC17940987D9CCFFAD93B
+:105340001D68945DF81D6A3E037875DA3175C79F54
+:10535000777EFBA1DA7D20241F11187E5B63623506
+:10536000C2A596401AD7C0BF7B59F778181ADED667
+:10537000D85F06DE21D7CDAEF74EB8A90D58BB6673
+:105380009F71506774D252201A4D300887432FCE38
+:10539000BA38781CEDBAFC6680BEB65E01A467829E
+:1053A0002ECDFCF3E9EA20D2D5C57F7DBA7AE36F32
+:1053B00097AE4E0A057FBB74A5D44BFAEBCCCE2832
+:1053C000924D2E27B5D516AD3F8ECDE492D439B38C
+:1053D0001BE525C4997DC68701919515CDE47A2FEB
+:1053E0001880FAAB5AE29593BE42AF9C8CAF34BBA7
+:1053F0009D7E37EB38AE42E3A27984E3CA61E80EC2
+:1054000044B1AC503F48CEE7A6303CC18335C5BC63
+:105410009D81ED869A8F8CEDD878A87E9C2BC276E4
+:105420007F9F93C862F70ECEDF3B4E7C452227114B
+:10543000197D7D08CBFA1B2EBC0FDD4E86371CBCB8
+:1054400030FA2F453F49C120FECDDDB791FF220044
+:10545000A241765D619B855FDBF1FFCDC77D9FF348
+:10546000757BE12C0DF52D60FB0DBEB784CF039647
+:105470003F1074E25B673C299C00A21BBBDE48EB3B
+:105480007F27F25316FE5E25727DE3BD2FA5FE1B1E
+:10549000ED416BB3A03FC6F07AB8E17D788DF1E5C0
+:1054A000EAEE0B15F47B5C2F8EA17AAB1714298BD7
+:1054B0005CFDAC066E1702F4C9CB22EE711BB91E5F
+:1054C000DA25EDC379BF5A21A571FF7BB5E27F488C
+:1054D0003F7FD594D288E4573BAECE194EEE1C6E7A
+:1054E000E0F6AC53EFB029D1FE7E58EE0B67D3E364
+:1054F00007C74FD3F8575548DE7D5AEE9371FDDF4D
+:10550000FB22F8507F3EDCA00AAF4D65C62FCE933C
+:10551000D1D1EA8A2205FD0E23CD6B89ED0773F008
+:10552000EBCCB3252CD23C5BC255E4B76AD1DE216B
+:10553000FBF10C7B8FF26028781DBF558BB63C2B9E
+:105540003E9408D7B7145F32BBBD69CFD72967FA3D
+:10555000B31CF8DAC2DC2E6A0B73B8DA62621AF98D
+:10556000BF2D9E7D5CE7D96CC3E7D46B8971BDB458
+:1055700085C993D1C02387BDF030B41D457FC94490
+:105580005BD6E4D7F6367E0EEDEC64D8940C7CD373
+:105590002B4C62E5097109366B6CDC9AAA8E6AC6DF
+:1055A0000279AB122F3230602C7456A21F70F217A2
+:1055B00037F67C8DCD6BC27CBF86EDF26A523DCF53
+:1055C000B176E399989358BBB1C7D7AD4339FB4F38
+:1055D0006827A220B66E6A443F560B0E7109C0C3FD
+:1055E000E2AA4AF4B3C9C0E502937ABA3C06FD3395
+:1055F00040CE99A1E403FB13CEF907DB0D85B788F4
+:105600002DAF68DE24AF960F2FAF36F2FE2DF61FBA
+:10561000CA9B0983E351FB71758A078F6333BE1FF1
+:10562000B0E9D20FCBFEAAE38C87E501D44F222B41
+:10563000442D8DF5A12B17FD5063D6CAD08DDFCB3D
+:105640003B1B99F81811EF4CEED570BF715258E61C
+:1056500082F79722F7334DBAEB9820A0DFD7602A64
+:10566000FD4C2CD7CFCC46A7DB6DFA1C28D7AC1647
+:1056700092345E62C954946BB522D9BDFFB46256B0
+:10568000AEBBFDFBF63883EB0FBA3C17CB7CFDE5D8
+:1056900015A21998F1A7AFBFFC21D73F7FA3E2D98C
+:1056A0004F3FECBAC8687B148CBCFE7FEE38CEBA94
+:1056B0009DCF1F5C3E4EBAAB3A80F2EFBEC4F07293
+:1056C000E5FC755B4EEB36660598E92C72252009E2
+:1056D0009E7DD579AA900283ADB3744C22F9268DB4
+:1056E0009DBB72270C3DAE145332EC37BB3FCBDC75
+:1056F0005FC2D6FF13E0FCF5CA28876A510EA15C91
+:105700002AF7BDEEF68F308C0F9619EEDFFAC2FE47
+:1057100003288F2C268FD07F9AF9BD16CB2E7AB80E
+:1057200042E2FBEFBEEFFEE202818D73C4F0EB7E3E
+:10573000F6EA90D0FB06F97D2B25DA8F113E752E07
+:10574000B607524E8E989259CDEAF7960BB48FFA5F
+:10575000E1A5EBFE91DA8728DED1BBE0B52F5FCA69
+:10576000DA7FE2321F720EC704B68FB37FA25E7378
+:10577000B6EFCB97B2FA872ECB1F56DFAAC5F9BA80
+:10578000E8E4AA67BDE555486F08FF7FBC59FB20D8
+:105790001BEF08E424FCF8ACE0F01D41F890EEFBB0
+:1057A0007EF506EA85874D81FC51472A7E16437BAC
+:1057B000BCD214485F5CBA4048FBB3CC73E982DBCF
+:1057C000264F62FD258C901660DF0F55BEBDF55249
+:1057D00006EF553F90B6E1F3F45EA920593634BC8C
+:1057E000CEFBAB4CEFFB01BD189216E21D341E97A9
+:1057F000F0C58CB89B5E07F418396166F3B7AD95B8
+:10580000B8FF51D00CD2EFE4B002388FA1EADF34F8
+:1058100004FDE6407FB7847038FAF7D9AB75B73C22
+:1058200074E050E44412C791340576A19E917B8DBB
+:10583000EE9E7F83C4E34242DC2478148DC3A3C868
+:105840008699CDDF546FC3E3F403D069B7EF87BE09
+:10585000F0207CAD81C44AF45B58B9DC7FD812F1EA
+:10586000FA03F7D8FD3CE6F4E783AC71158026EA2D
+:10587000BF6A4C858AFD3757703D490783FCE32D8D
+:10588000CC6E8461F4BAADB6BCD88CF10D3FC6398C
+:10589000343BCE11E7FA53F819F2939D2913C9AEA0
+:1058A00019AA9F88E1D54742A55E3BC6D15F027A1F
+:1058B0005E861FC8EBF7F18D914547EF437A1D09CE
+:1058C000FE013DCFAED72EA7542D2B9ED2C3EA7337
+:1058D0007F3DFCF1F6215F97960DAEBF14DE1CBA3A
+:1058E000CAEC5FC95752698ADB25E21E7DC09693D8
+:1058F0004ABE9AC27D01D4A1BE0779FB30FB8EF16E
+:105900008C7042477F8A043C2EA4221FB8F0F3B665
+:10591000DDEED3B268EBF3298A830A7A8AFC766AD1
+:1059200021E31FE1FC76CEB3CF6EDFFE87DB5F2184
+:10593000FE2850893F049DF14F96719A24F394C438
+:105940009EB74AE65BF8F4FD514A66E393FFB2E581
+:105950008A5A9BD0D5628A2B923D92094740E6FD38
+:10596000DEE4C06FA5284E395AF8DF1F25FCCE387B
+:105970000C7E592E20F87DF81C0A7EC986270FF46C
+:105980004619E59ACEE52BC032DDAD97DC28737958
+:105990009167CB2780DBE26E7BEB7ABB9FD1CE2772
+:1059A0004F1EDD7C9C71D97C26C97C3D26CBC3ACC7
+:1059B000C7441B8E1B65BEDFA9D5093DCED6257712
+:1059C00008BA5A60C39192455BAFB8ED43D1D5C5D3
+:1059D000A39CC782C1759967AF4BC570F3986BCF15
+:1059E000A35382F9AFA35E3CC5F1F72CF7ACCB1DF6
+:1059F000367E3AFDCEBA6CF0ACCB2DF6BC463B9F62
+:105A0000C5767F23CDE78EC1755966CF67F970F3F0
+:105A100071D5BFD6AEBFD2AE4F76C71D726913DA4D
+:105A2000194D5262955C30381EABF71977BDB79BA4
+:105A3000CF34DAF56EC0F7420DDFFF58BDD5EE7AF0
+:105A400060459BD03FD08AB602B3634A5A2EA9B2B2
+:105A5000DBD551BBDA81FE6FB6F983DA055A8426AD
+:105A60002B4CF5D661BDC6457F74EADDEA85F76249
+:105A700007DE0D046FF5001CB7BBEB2D9027507FA0
+:105A8000E7C51D46E90FF2C5921D18E7CF834827E9
+:105A9000E679B4C9A947300FC0B264780CF309FCA9
+:105AA00086803EB66845EA1B582FD762F635AE5B56
+:105AB00055EA292C5B22249ACB299F80F205EA65BE
+:105AC00055F31B987F61C00E56D662721AEDF356DD
+:105AD0002169E1BEF85329F96599E4ABB6AA11FB37
+:105AE000CFD7B99E0E7DB46F3970DD13BA8EF21F19
+:105AF00072195CE88F6ACD80EBFED0A41EDC6FEFDC
+:105B00002D50484F66065629CA973BA5A081FDF542
+:105B1000147C9EE0DDDEC8F31BB67FE2F304EF7D6C
+:105B20000250DCF63E1FCF6FB8C7A76A4D1AF617B2
+:105B30001DF759CA87C8D1FCE5361C08DFDF1513ED
+:105B40007CF9A055DE2890F8EA41FBB6B542217DEC
+:105B5000797B6C5625F557A1929E7A5F625623E9B0
+:105B60001D1541F2D1E7870DB25BA3F314B0B01C51
+:105B7000331A51CF8CCC0D620E0CE417022617405D
+:105B8000641AA4B1EC83CECE12F68C7630BB249F7F
+:105B9000EC26B811EDDE0A8677B4232CF328DA253B
+:105BA00061B0FFA44326CEDB374102F47B38EB1B08
+:105BB000ED1C683FACDD154D8FB25EF7E8EA453A63
+:105BC00098DD3F7B14F53A47592F3DCA7ADDBCDE9C
+:105BD00088FE0E83DB7B2AFB0FEDB640A6DD1CF6AC
+:105BE000DAC3BE8CEF99F1B8CC67663CE4A4EC8DC7
+:105BF000878CD4DE89838C345F744A0CC0298D5C19
+:105C0000DFD13787FAAE8CBF266EB2F6ADE33E1D0C
+:105C100027B9366E157F4EB4DF4F5C69973F6D979D
+:105C200057AD34B3C8F7B13E2E874BD11F329CDF3E
+:105C300001B8FEF80683FD9C80C94BC3FB4F32F5CB
+:105C4000DE4C79A7CA5615F2EBF604F76BFA9119F8
+:105C5000910F0B81FCB03E487596A09C0033BA783A
+:105C6000CC20FFF8CC174CE4E7C3E324102A687D6E
+:105C70000CF2A767D049265DF833FC397F2E9D7C56
+:105C8000CCE78DC7FEA5E844E99046C53F4AE72822
+:105C9000EBA54759AF7B74F5FC1DC2E8EA758EB2DF
+:105CA0005E7A94F5BA79BDB6F90ADFCFE17B4D662D
+:105CB0000983FB12D5536EBB24E8FD7E69D8536E71
+:105CC0009FA3D0FEEF94FD73554FB99DC979CFF7CF
+:105CD00079612A6F6AEDAE625BD9A8F9E43FFF44AF
+:105CE0003E295547F04B578819765B065FA97A0025
+:105CF000DBE7CB3A60FE547E8CEF53EC69A6B3E051
+:105D0000F7119BFF77C93C7F73BBAC07D07EFC5B70
+:105D10009F67A38FC3EBCC7724781DF9FBA664EBB8
+:105D20005B43E57D54F3BC4C1982949759526D56F0
+:105D3000994C2EC92FF2385866BFD729C9A77D2E96
+:105D40007B58D6923CBE67F7B7A44026BD44667226
+:105D50000DF51E05123545144714C9DF278747D8AE
+:105D6000370A5D72AB7818B8ED3C56FAA40354FEBE
+:105D7000968F1B3480E46B04FAC898CE41AD670A55
+:105D8000EA69BA00D4DE10B8FF7C8186FB5E2CF095
+:105D900097EE7715F52B98F7C0B9D087E857EE2323
+:105DA0007FE75FBCDF11E00D607EEFC5144288B96C
+:105DB000F37B7DF114BD84B3E7CE49738137A1BF76
+:105DC00024C5D765D1207F288C8F925DD61ADBA0A1
+:105DD000BAD7F5FF7CC51EBF89A2B5DD2644D9B36D
+:105DE00070ADD9370C9D9FC3600CFA470A6F34FB26
+:105DF00086D94F07E29918AFCFC2076D4A328DFAA4
+:105E0000BB3529CCED7939457EC676216FD6E67251
+:105E100017FD162ADD0857A4DCB4D0DE6BCF170DB2
+:105E2000D45365D8DA2BCC60EDA45A2399458F184A
+:105E30006C2F9F74CF27A678F5A9E611E8BD7504ED
+:105E4000BDC7A718C96CFED0690AB76B7DC1ECDF6E
+:105E5000EF12AB4A9439E7E38DA9F9DCBECD850E8C
+:105E6000E1639C7C28DFA1F08557100FAD0557C476
+:105E7000879B2F68DEBCCB9B4473A6323C1C73B25D
+:105E8000C131DA7C10ADDA203A1CD097629CAE5159
+:105E90004F12C660BE07FFDB56BEAB1BF3407C371C
+:105EA000F0B8AC64EE06F4533B7A9364064F88B4C2
+:105EB0009E0BB8FE54CAF52193FD87F3882E185E19
+:105EC000AF9632CACB14AF3ED4DCB017303EEFC031
+:105ED000EFF8F132E7758958756D767C8CCE1EBE71
+:105EE0008FD10B4CC378948A4881CE068DCA5F6EE1
+:105EF0008853796B834ECF9686527A6EC1A6F39102
+:105F0000CF531D450C6F1DF147E39F6555EE43D9F7
+:105F100041FBFE758B504FDE3C50666620837B3321
+:105F200006BC991E71BB72D522B4DF3707C0F62BB1
+:105F30002C5A647ACAD7345762D9F6336C6EBB9E3A
+:105F4000EADF3711EC7310A6FA49D7BEF788E223CF
+:105F5000FEC6BD85B7379BB1BF806C97E1B645DE05
+:105F60003298084F40E5E5FDCA06EA9F44001BEF62
+:105F700027CAED7CBCA9DC8F0F65CB47C023F7EBAC
+:105F800083A273F9599647F92C8A61A0FB15EECBD1
+:105F9000B5E11E6D3F7292EF77C7B2EF97837C3306
+:105FA000C2BE66C331D2FA3374D87E88245838EE24
+:105FB000CF791CF1AF3DEE7DBE0F8717A5A2DFC2E2
+:105FC000F3230B94E4F791DE23665777112B476B8D
+:105FD000BB2D62DF518E7BAFA2D9F34E12FF3B780F
+:105FE00076F48EFFF279D7D11733290F2910E6FC0A
+:105FF000375A78FB50BF9A33D80F3C51356E387DF5
+:10600000AD2021A21236202FF26B82688C0D947382
+:10601000CD3C4F39A762BCA77EC428F67CF7691730
+:1060200079BEFFA9EBF4F38C79FCBBAD373AE51FE1
+:1060300067CE7394FD3AE59EBE4562295B87976BF8
+:1060400025D2EF5EAE7DEDBED9584E4814BF3DB3AC
+:10605000B2D9878C740CCCC81CF4872525DB9F6EC5
+:106060004E447CFE1CFFC9C67B09F73D269F8ED897
+:10607000E77F989C9888E79F8E5C366F22AEEB1185
+:106080001FE76FB03A493EFDCC071E79F0335BFE47
+:1060900018ED3B9AD10F794CE065A97DC7228BE2C0
+:1060A000835BDB3ECEF496AB390A6179AD90D51EA9
+:1060B00088F815C2C7074232E267F334ABF5D61849
+:1060C000E6BFE940FAAA1F12A497D5835529A2BEBC
+:1060D000C3E88FE2DC727F6136BDE367F67EEE8750
+:1060E000AB49DF5F5E9BEB4363DE5F33D3877ED4D8
+:1060F000AB6B2A7D60EBCB9A0B3E3121D0F9A91511
+:10610000B5FE5D88D715B2E9CB16D7BA3AE1F7EC00
+:106110005333190E11FE63F6B90780FE4277BC694E
+:10612000A69FDB3BF192E1ED05076EA7BCAC76E6DE
+:10613000F38807866D3A8F026A7FE1751177BF2178
+:10614000272E1CC17E5F5EF90F7C7F6674817EC541
+:10615000174F7CCE4771D915F91EFE5B5E2D79E095
+:106160004F2C0879CAD7D45E9D33ACFE91F467C832
+:1061700033CB3E8729921CDE7C5C20F99033A93F0B
+:106180008D799AF0B2045CFF73FCAF9790FF353ABB
+:10619000A15F477D017E13D21E73C9CF169B2E8748
+:1061A0001AFF393FD76BE5BC1A8A6FBF7742D071AF
+:1061B000BE425EFD349CAFAC984D386E4B9198C694
+:1061C000B8F79DC5DB555CEF4D251F4E0FF4C57824
+:1061D000BC5FB7B459C8FE43B54B9BFC1C41E6FB02
+:1061E000B57E1E6F69B5966B25B88C07B44A9C7F47
+:1061F000A010B29E3365F4BFD68F7EFB98053CBEDF
+:106200009E20BDBA445D4D79B8F2F8E1E3B59978C6
+:1062100093ED386066BD276D7A2CA9D845FDBE7711
+:10622000E1F0FD3A7879DF10A1D7D627B0BE0A6C2D
+:106230003E0CFF5B4A791E6E4BD9338467C9AC2490
+:106240007DD6A7A54CACB7A56C35D1652BAB93CF4C
+:1062500086CEADEEA2739A5BFEC0E3134FB61F6805
+:1062600046FD614BCFCD807995C1781A507E6C99EF
+:106270007E938A78D8B213A017E958EE22A75CC89B
+:10628000F687873448334B0A426526A05CC8D3F8AA
+:1062900099CA7DF12AC075DB520E06B2667E3AD5E8
+:1062A00088A19F2D711EFF0E969A354508F73891EB
+:1062B000C4800EC90E2CB7D4CA348F368DE303EDDB
+:1062C000AE734E7E17E6C19470BBAB04FDFBAC7F92
+:1062D000E58B7CDEFA8E12F2136DC97DD9447DD731
+:1062E000FA04185381EBB5A427C88C8EB0FF7A2D21
+:1062F000EBBA6F1593DFF2BBE2F7B2A60B48A79992
+:10630000F879CF0757E2BC5B668AB02B8BBEB1D75A
+:10631000CFE3756963F955C559C679CEAF7BF204F1
+:10632000F4F715827BA8FA83F564F2EBA3E1B1845C
+:10633000CDA3A086FB4B21E31C6B0C9264DF8E0582
+:10634000AB11F9D139BF3AA13AF1CB247B4A91156F
+:10635000944F37D4795627CF7375852D9041BFF66A
+:10636000D76CBE371FF401E2EDF2B38FBC80F95257
+:10637000BE0ABF46F955D0F902E66FDEC8D4312C0B
+:10638000DF7C7CBA82F93F2F8F97303706F9278A56
+:1063900074F81688947FF6161C8DCE76D1F9297B79
+:1063A000DF41C98A72A43997CF4B0EB7F54A515CC9
+:1063B00077D9EA73F2F74861E279ED1066EF55CAD2
+:1063C0003E6A24F9D7C1F3859CFCC8CF767AF3875F
+:1063D0003EB7C35BBE09968F41BEB989297469D6A1
+:1063E000EFCDEEBC2F36FE313FD70F3E07A936DC8E
+:1063F0007FDAEDFC9875DF9FAE205DDF3C5B2BC242
+:106400007318CE3C7EEFE776E849C6A7BA8BFFD774
+:10641000C4D2949F9C39BFB7F62CEA4EB2F26BBA45
+:106420009CE276B6779EEDBEDEA598EF656DF3D95A
+:106430007A8337CF71CDEE4A13F3C518F6F47C6F2B
+:106440007B82FF1F3ABCF31D091F99F377F4C1A1AA
+:10645000E6A3EC16B2E6FB85546FBE54B3CAE38DD7
+:1064600066B30C8185E79F8FB6AA5274BED96AF2D3
+:106470006BCD318A4F52FCAF9E110EC6F7CA559DA7
+:10648000FA792F30290D740E21350FF5A33FB7DFB0
+:10649000F92AE7C3BF74BF0B8780779DDAA7207FF7
+:1064A000AE973B6B84E2C1F301019F654E60F8F645
+:1064B000EF5DD63D013CF53A4659EF201E811E4561
+:1064C000BD1A7198FE4EDBFBD6BF3DF12F0AEEDF01
+:1064D0006F3D7E6229CAB95BFE550295D53BFD44EE
+:1064E00004BA69DF492B2897D7EC9168FD41EE9EED
+:1064F0007BB527DFBE99E67FCB5311DA1FD63CE38D
+:106500004FD7B2F66BBEF7DA0C607C7BBAA9FF8579
+:106510000988BFC7059EC760F5CDB89ABD5F23C384
+:10652000F5D9F2106E50395F9DFA416825EEEFC241
+:10653000EE9EEBA8DFAE6B7D7E97FC5DA9727B9A29
+:10654000D533F1BBF54D213D55E0F065CBCB3BF5A7
+:106550004DEE4759B3D797C63CC535BB772A495648
+:106560006FFDEEB789BE173DF56414F1B07EAFF74D
+:106570003CC22D4FFDA1ED92723AEFD45F8BF24FEA
+:106580003A4BE533A6DACFF3E0B93FE656E2585688
+:10659000EF3B6F5EF16BF6FD645C82001329277B95
+:1065A000FF53F9572C27C32926CA58FFBE57DD7C55
+:1065B000B87EF76B74EE481399027B299E87C8F862
+:1065C0009E519FE9B90ACAC3F55D9BDE4679B97E43
+:1065D000CF5BBF42BA5B0FF2AB6E7E3E89FF18778E
+:1065E0007E3C6B93EAF5D39D814373C901B03B3F79
+:1065F000ABBDE8C4B31CFEBEE5C9330FA31E71EAF0
+:1066000099FF7A18EF6758FBC7FF7918F35AE147EB
+:10661000010DE5D6FAC77F1E0517FE1FB5E5C3E9D4
+:106620006F7EE3EB0F303C9CFEA59FB076FAB93746
+:1066300027E13D1DA79FFEDF31A87F6C7C6EF158DE
+:10664000A4B38DDF5D3476B873A048B769BF7B7D96
+:10665000D3FC7E83BD026E8200CFDACF8C7581437E
+:10666000FD0AEABDEF0AD0BF3997BDEFFA8382FA7F
+:10667000CB0B26F4239EF6EF79ED85BB58F92DB6AA
+:106680004EFE2CEBC4E63F41A4FD8DB10F7BDEBA7C
+:10669000E7EAAB2E2BC7A7CFC0EED7433FED1BE7F2
+:1066A000ADEF31B6BEE583EB9BF9FD0C9C5510FFB9
+:1066B000EB9F60EB3903D795ADE78CF3D7F32DFC57
+:1066C000C7FCF3D773BFEAF5C79D81B58F3C801F28
+:1066D000F7E467B56F9DF55CF7DD4F0EAB973BF2C6
+:1066E00061243CD3F95E06D75754F3672AF2ED33A1
+:1066F000DFFAFA0331BECEB50C31A79F3C33090F48
+:106700006BFCD6D77F1DE2A1FF39BF867AD49AE70A
+:106710007E417C77FABB2FD1B91EF61715D87E774C
+:106720001A06FE8E022BDF2AF0C23ABDFF8A5FB145
+:106730007ED7B12E2C83D6EF8A5F95E3FAA9FDB4FC
+:106740001EE965353ACADF7401CDFBD634E78F5BAD
+:10675000D33D2BD09F9D89F748C0C9271C5C57F4B7
+:1067600097DEBAE7C415487F43ADA7337F0DE73FF7
+:106770008F7D7FD4CBBF43F2ABBDBEA777BEA7A0B2
+:106780007ED5FDAF8A26323BFFB4AF5F198FFBCDBC
+:10679000D39286E78D33D77D10FF4D59CF1D673ECD
+:1067A00033E9C31FC81EBF76F03412BF8F3CBF0F42
+:1067B00087BF33F63E9C89C75367B3EF075302DCAC
+:1067C0009EBB153A6B50C5CCDCCF7C90B226140D25
+:1067D000C2DBD625919C3FB59BFB6932E5C5AD4335
+:1067E000D867339D71F6F6CC40B9766ADF0F6CBA84
+:1067F000E4747FEB132714CBDE1FD22EFCAE1FC236
+:10680000DF7DA9DDDFFA67B3F7B7FE89B7B3F677A7
+:106810005236AF45F84FF6FA282FE9649794D5CE53
+:106820009D1AF079F4AEB6C8DC5772583B291AA409
+:10683000BCABE626F317E827B58EFA6C3F80F15B18
+:10684000CCB76A8E04E99C7B73F426BA2FC9E9AFF2
+:1068500025034F723C41F6931C4B94F31858DA63AE
+:10686000C7F81841B8E106D92A44BDFF70D19B3260
+:10687000F67B04F548975D7F4486D6FC723C172171
+:10688000188D90C5BF91D17F628104BADB4FD83D8E
+:106890004EFC3D6BEF3F26A511B5F590EAA67301BE
+:1068A00085D0F55896FE1E6AD0C97E2E4A5C4FFEF2
+:1068B0001F7F2A65A2BE56B8512B16F5A1C79D9819
+:1068C000F2C6AFC733CAFF3D8E73D047FA20EC7EC5
+:1068D000FCF1C7C7F02D05F5F217F0C9E4DFE57547
+:1068E0007A21961FB2E7CD7880CE314EB41232CAEB
+:1068F0003921B64C46FD62712A21AF76ADE7E298A8
+:10690000301EF7D3F410F7407D3FC0F7CFC6C66BFB
+:10691000288FFDC12F8A44D70F063E5E887C7620E3
+:10692000775E18FD6B3DEBE61E9AC6E09C10960064
+:106930004DCEFDE1E1CF6D3E6CFB1776D9F70F3DF3
+:106940006AE7977FDDC6DBEE86527A3EDE60D0F7DF
+:10695000271A2AA8DCD55043CF671A12F43E7A577B
+:106960003089F4B9A76125BD9F006F0BB8FEDF6BBE
+:106970004852F9D1402EC13FF96E1093ECFD62C42C
+:10698000477870DE0E3C69DBEEFE7EE0C72DC8174F
+:106990000378CCC0F7E5D02BA8E8BF8A093AAE7BD4
+:1069A0007D40E779AE19F89DE4EF17302E577F3719
+:1069B000CF877858F09E77B8DF96FFDFB1F9F4DD26
+:1069C00068F2C9007BBE53B3A294F421D0CA906E82
+:1069D0001E1612478C22C2B3E7DCC9FABCE4770268
+:1069E0002EFFF0A40E6ED7EF08D8F26D2388486F03
+:1069F0001353A023BD39F3DE57A917A25CDC270887
+:106A0000B4DE486FA52E7A1BA0DF809D971CCFBEF9
+:106A10008F0FD22FE7FFF825A5F754235E3688E4C1
+:106A20000769C64FAE761FD874C4EC16D1427AAE51
+:106A300013C99F3BF9F8096112834FD7BE15C07B7C
+:106A4000BBE293C0F637750590BE1EACE3FEC5AF42
+:106A50001DE7E798CE6C2C5E368DD55FCAF083C1FA
+:106A6000A8BC25251EBFA5737EE16B6A22471BC605
+:106A7000BF9599F776FFE42FBD9FC3C699703CA4DC
+:106A8000E379987B26FFA84761E5F17D02F993C67B
+:106A90008753D3703D2BFFDF37C7F5B9D6E181753A
+:106AA000A9C9A837B64DFEB6807C30FEEC8F05DC58
+:106AB000474AB4E49BB83E1364FB9CB09C9A87762B
+:106AC000C1F57989DFE1FB4461FA53484F676A36C3
+:106AD000FE1BF6EFC421EBEBF5DC692EF990799EF5
+:106AE000E2A1D4F0FE4C67FE0FE1FC87A9E7CCDF02
+:106AF00059BF3335B1B5281733F199D96FDE9215E7
+:106B0000C38EFF907D8F189BBF3FE8926B85A93E97
+:106B100019DB39ED878ABB66CE77C04F34CA386D32
+:106B2000970FF2912E9EFEBF49DF3902483A0909BC
+:106B3000FD53FB02C97108CF5C4851994947CA67A8
+:106B4000377239FF3E30E6EBE388EFE47411E57D00
+:106B50008C72BC5648242A719F334423DB3E303D5F
+:106B6000C8E97E01A4C83F2A86EE1E3ECE5FE88DAE
+:106B7000F36F059A0458DDAA1DFF0059437FD841E1
+:106B800098857EC8FC20E7F74A99DB97B30FEA3B6C
+:106B900025EEB79296455CF8B3FD763EDE3583FB75
+:106BA0006ED0743CF735B34770F1EB7BA1E4C220A3
+:106BB000ABAFC4B93FD2174BD279CBC55258247F63
+:106BC0006E2797FFF590502FE47119C079EB1017DD
+:106BD00071BF7F68233FDFAE6B2182FBA1984EE53A
+:106BE0007A5B4FF9B14D473FB0E5FEF76D7AF92E6C
+:106BF000CA7DA49B3EF3400E83EB3BB6FC7FDA9646
+:106C0000FF4FD9F27FCEB13EF86639C96303F39ED8
+:106C1000BFBC3DDE84D37CB2C1A47ABB1AEAE8B91A
+:106C20003F77ACB897D57B74A3B80BF9F9516DECED
+:106C30009578DF55DA140D81357EC8DABE28CAE0B2
+:106C4000DFA90A143F7BB82145ED76AA7A938AF131
+:106C500014662D5B4806F5BD14F6A8FC6DBF56C33F
+:106C6000EA7DAD33EF4A8CC3DD5B23533B878FF462
+:106C7000391BB03944F3FC4164ABBC826E750ADA4F
+:106C8000E91B45EAE72B81CFA88BD873E2C4A3EABE
+:106C9000C7755C8C13668A7D5FC4908CF3A8E8EBA3
+:106CA000B3B05CF27A98F2B5E7BED2074FB3725137
+:106CB0005D84CA132D2F5F4CDFD367753238269E53
+:106CC000E2DFABF37E6775B1FA391BA2D45FD5EB77
+:106CD0007D02D2B3AFDC7BFE6A87EF97FB236CFCAF
+:106CE000D8A1848078DB27688B3025C4FA143F7FD5
+:106CF00033F62054E1FB787409ADC3F66011D1CFAF
+:106D0000D75A8EC66F463C6D8CB5A099B37FE3060B
+:106D10003A9FE0DFB891EB4129EEFF9E78C701E191
+:106D2000732EF950D82267F5DB6D0FFA799C64E376
+:106D30008AC4340EDE8130EA7B25DC5F59D45AEDFB
+:106D4000C96B72E2231F08C9ED41B29B789C44D6FF
+:106D500052F4FE32097545F6FA4E91EB4989DE8010
+:106D6000DB0FA3DFC1EF67CB8463575026385AACE3
+:106D7000EA3A9417DBE6287200E19866DFCF62C733
+:106D80002107F63121B9CB2DD7648DC33591A132BE
+:106D9000847077F77EAA8BF5F37ECAD9C7CC20E939
+:106DA00049F788C41F5BCBF939C0FDC63BDD78CFFE
+:106DB00085C34FAD8648FCBB5D16D202EB677B797D
+:106DC00071EE85483F31DCBD69BE2AE2B944F6F177
+:106DD0001C0E30F7A15FDC8F7E71B6DE25C743271E
+:106DE00044F2FF79F3BF8B2CEFFA8BF5DE73771348
+:106DF00099D2E3CE57064634037446FB6BF5BEFFCB
+:106E0000407E5819223A03CB8C568EC1F445FB4F75
+:106E1000AAA5F3CF2519E70C1EB0EDF787ED738413
+:106E200070F63640B9F5807DFEFA81B5625067781C
+:106E300079DE3A4AFBE6C4FAEE4A0ACC687E4F7E17
+:106E4000B5FF6EAD09F7D7A294374FA832232FA80C
+:106E5000E4CFCCB33E1EF4DAA9FB4E060DBC0F2FD7
+:106E60007D4C32509FFDF25DB349FE596BB8DE9206
+:106E7000AECB7B00CFBBE40B60E07BA75FC77E7D22
+:106E80002798477C939ECFBEE730B912E95A5287C4
+:106E9000EB05395A530CCF43DF09DFC6FEEBF8FA96
+:106EA000571602DDAF5318033AE7CC9E9B2F40FEE6
+:106EB000DF28624C1CCEA19C4739AEF6BE88EF732A
+:106EC000AF14E9FE9CA216EB429CE7BE4BC68F476F
+:106ED000FAD81AE6E75E9A851468086F01E7879D7D
+:106EE000916ECA07DD562342135214C3A581FDAC2F
+:106EF0000EEEA23C1684770ED11DE95D18A3407EEC
+:106F0000B46E08F27DE7AC7521FA95A3A1BEAEFD83
+:106F1000AC9F70BB62EC62FDECACF4DE533735C461
+:106F2000F7BB404870E2FB81107B9A5B81F216D977
+:106F30005C88BF195F5940FB8246769513DF8FEE60
+:106F40005B22164DE7CF6217FFEEB2E56CDACE5B3F
+:106F500078D8DE3F1C7DE301DB6ED86AEF1B45E687
+:106F6000554D0AD26D1DCC443C95ACED125667B31D
+:106F7000EF3BBC7235935F2667F24BCA7B4E75427E
+:106F80005DB1E77BC4B8C8F39D4231B8EE6CFF46F3
+:106F90003CB707CA24D4FB6643C274CB95A1F6FF65
+:106FA000FCA03923F421F49F68289142FD3353FF5C
+:106FB000BED45E97EB0289F9B81ED14B56521ECF54
+:106FC000BA40E252EA5F4E0B284F1760BB58567822
+:106FD00029F96B14F0567F18784136E83CD79D921A
+:106FE000739FADF73C1764DC5F9B793FEDC2FFBB3D
+:106FF0009BEEA76D1598A287E51CFB7E5A3FBF9FAD
+:10700000B635C2EDAE563B8FEA561B0FD787F87DDB
+:10701000AF6B6D3A5D18CA7EFF91E3F74AA16CC071
+:107020007A63B3DF3B861A15F6B77042F6EFA91004
+:107030008F3B2E9C3CFC381B701CD6CFDCA0B92E9D
+:10704000E4F2AFCC0E99EBDDE5DB43767E919C203C
+:10705000BDD294F97E5814343786E6B8F06B3FF30E
+:107060009694D379BE33F6793ED66E87407895B440
+:10707000D1E0DDD1FF5B05FD1E92833F677A5F960D
+:10708000F5782F18B5C49CC17894A31FED0E717BC1
+:1070900092D1DB263E8F34E5418741BF07EF8198CF
+:1070A00080F770EBE85738FEF0BFA0BCBDACB70668
+:1070B000F5A7753F94E87EBBF3F0B596D19D2B1FE5
+:1070C000C5793FFEFD0964074F9692F7875CF6F19C
+:1070D000F8BA7E05E91DE1AFE6F0F3FC69217D21F8
+:1070E000B70780E238AD37C73DF98499F6481EDE10
+:1070F0007340724521BD2E132EC79E70CA99E711A9
+:107100000EDB74847FFA18BC271CB8322B9B12F25A
+:10711000D71C48D2731EE8F464764B17CE83F19FD8
+:107120008E703685265D8AF3F82BE2ED47A1397F14
+:107130007B7873E8B82879F9001D67BBFFFAFE5029
+:1071400094E46DFDF108E9FDD17D5F20BA96185DEC
+:10715000076283F932F560E7D187A10BF5DEA264FF
+:10716000039D0B3DC3E818FB95347E8E55062D819B
+:10717000711B29C6F9C327976AA2867159CB8F79EB
+:1071800007563118286BD11FE986B73C9C7CD38DFC
+:10719000C73B8FDF43F2F6BA40F224AEE79D259657
+:1071A0001F353B971C3EE596C3028475E4BF856797
+:1071B000F97E5999D465A487458CD311EF8B214969
+:1071C000E58F8345CF2590A6E7DFE19546A4C7D993
+:1071D000E716BAAF15DDE71606F2B9CB9D7C0E1E99
+:1071E000A72AB0E9106C3BF5F995CB1B17B3F1D981
+:1071F000E29B188FFAEA4A9ECFE39F27D3F9D58204
+:10720000BE1B6A314E042BB85EE6E441E4D57AF544
+:10721000B4F3EEB73AFEBBE3D82EF39C9CA3AF6564
+:10722000EE5BCE33535FCB0B673F3F39D4BE931930
+:1072300057A8C77F72FBD5B6AB1339EE7BE3339FFC
+:10724000871BFA5B0EB8F2CC8FE0FD4659F7011EA2
+:10725000EF8DEEFB5DED8A72BA5FCEC094C9DE861B
+:10726000EE85AF4F1DB483130B729F477F74A23A14
+:107270007796C4F0BE34FE6ECB817C806566CFC24B
+:10728000D75DF3ECD518B459F48481F14CDF07EEE7
+:10729000FDF72D85CB97567BBC881D1F6B172D3FA7
+:1072A000F1ABED7FFB7D21B7D31DFB3EDB7C5B08A3
+:1072B0005F7D61A487A1E6FB0F61BE9F8E5969D0F7
+:1072C0007DF9CDF67DF9CD139DFC2D43437DF2A6CE
+:1072D000702EBFAF205C42F1D5E69EF9E44F2E3808
+:1072E000E4237FFA981549C172ED8BF73670FFEBF6
+:1072F00057987E87F9205B985E87E57D957355B436
+:10730000176E8FCCA278EDE606C3932FE23CF13ED8
+:10731000BAA4CBBFD79CA8D230DEDB523B4B45BBD7
+:1073200043FA443995E50B677556317EFECCD61984
+:107330005714605CA28CDF47763D2B3796303B3A82
+:10734000CCF7D9C3C6EB61C453555877E887D6D17B
+:10735000B72269FA502EC4B52ACC9571DE834D5FF1
+:10736000EC3DE9D76F29C99BC36CFE87ED7BB1DA91
+:107370009554E986323C17CF040EFA8955EE27441E
+:107380003A68993D08F7061BBF97D8E33281243E3F
+:10739000ED5A3F25CED7AF5D84BA6CEB737798EB8F
+:1073A000372D9AA90D4B479AFC81E7FED0F218CFF2
+:1073B000CF8F313A72F1F3F9F4CEF9A93C9C680908
+:1073C00017A05C84D214CD3F4CF287DA4983F7587A
+:1073D000C6C36607D63B9A6BEB2F853C0F9ABDDF81
+:1073E0009243F34B917C77F4C17699EB73A3D50765
+:1073F000F3966C247DF01DC65A649F7D6223C9ED0F
+:107400008D3E95EEFFDBB740A67856740A5CEFB66A
+:107410005BA4887DFF7F84FBE5F17712D2D3B8DED1
+:1074200083E73CA221A0732EFD13797E693BECAC6F
+:107430009942F04DD5DCFB59E544EE67D85615ACC2
+:1074400073FB1B16E6F278D98BB995BFC3F9978504
+:10745000D355C89A176BD087F93450C5CF8F09859B
+:10746000FC9C8D0F0C95F36BB586F7860A90A4F300
+:107470006743AE1F78EF177D5C4E3705116F31EE15
+:10748000D789EC1028694FEA32BBF1EC4E7BEEF263
+:107490001F223D32B967207FF7CC0D92BDF76E8F6A
+:1074A00042F6E7BB37C3AFD19FF4AE2F072CB654DB
+:1074B0003F12C55F3FC5E6DBCF987517E67F69FCD5
+:1074C000FBCCAD02F99B7EF4417002D2BB110511D9
+:1074D0007FCF6229D32778922084303E1B5D04DD64
+:1074E0009763FB9E30E1CF17FFC9C2D767D3FE1366
+:1074F000122BF0BC96F820CEFF9938E461FBD9FF3F
+:107500005B25A1FFCAD187BEAA258F22DEE6815561
+:10751000D7C3DA6F53387F6DCB53D218A79C552051
+:10752000921E02BE507A2AFBBEF4E0EBD598DFB97A
+:10753000B46226D6C4F169BD4BB4E4719C77B5B68C
+:10754000AC3A97D52F3FA693FCBD227EDB012CCF12
+:107550003DCECB3E3FD7E3518F719F0F58FAFE24AB
+:107560009AD79B61AECFB6C4CD5E531896AF32EEBC
+:10757000E5F59E2F70E8806DEB3AE6A5D3BF75A2C6
+:107580008BA44F1CF43F4185619F3F71E8C1143EBD
+:107590000C3DEC09F37DA11DF3CD6283F966EDB6D8
+:1075A000FE36DA7CB34C7ECA5B22D33ABCC3F42DE0
+:1075B000BCCFE37C3EB98DEEFFCCE42707CECDE512
+:1075C000793194C30EDF68F3EE26B9ECBF41A1FB1D
+:1075D0004C1D3E72F8E7D29C013EBA0FE5C58AB059
+:1075E000BE98A76898E0E693AB47E0ABA5D07F20B4
+:1075F000C6CA4B65B07298083A3CFFB725935C7CCD
+:107600009289CFA50B0478D5230779D9856F6DE0D2
+:107610001EE02C76F250EB7254E6E71E1C3EC5DFEE
+:1076200063C1F3631DA201B81FB5E7AE36226CDD5E
+:10763000E4DADCB5C80F5B84440AF92132EF54E880
+:107640002686F777C7302D12FD87FAEAA788DF5F15
+:1076500009915DB66DEE1A8A4BBD7B737232EE2FC7
+:107660009B18DE5FA5FD3C3D56A45CDBBEB13C6FC4
+:10767000428FF36732CEDF83FD3D6D974DBB5E1FBA
+:10768000D563EBEB919B3F8D723EF86994EF539B72
+:10769000944E15E9A1BF48D5B2E52BA722BCFEE563
+:1076A0007E28C7FB18D968941FD0AA4A353BC95910
+:1076B000C2E5C4E5534A77B9CF5739EDEE6DE822FC
+:1076C000BD6653C35E7AE6D7A601F3E882A5968E1F
+:1076D000FA87FAC74502EEC770118FCBE3FB4697D6
+:1076E0005EF7695BBEAB785F101B4F6DB274F7FD40
+:1076F000B4AA2864BD47E84894FB89D526A0EFEAE0
+:10770000BE7FA6FC85FC1243F82C969B3AE9F765F0
+:1077100002DDFC7DACC4146E74F51BABEDF2ECA382
+:10772000AAD82793DD540F9A8546A0DC578DFEB961
+:107730008EE5C14ECC6BCEA437FC7BD54537EA1F16
+:10774000AF26FD098E72FDB5BA58253A6FAD577652
+:10775000A2FFEFF7B12ACA67EF88089EFC02E7890B
+:10776000F177A611923FCDF2F338BC358DC7E1B168
+:107770008C71787C621C1E9F1887C7EF1887C7F230
+:10778000B71B4C2A633C1ECB188FC732C6E1B18CA5
+:10779000F1777CEE6DA8A3E70F1B52F4FDD9867A32
+:1077A0002A5F6ECB5728E5BF07D6F105C5C4FCA9F3
+:1077B0006E7B7DF69BCBEB7E86FE42881AB8AF07C8
+:1077C0000E35BDF2EF7699EEC98E17E7A3FF126270
+:1077D0002260DCA12DBE9DE9A283F30BC8F7824E87
+:1077E0007177AB0EF31EBFB1ADF70A99E91F25F112
+:1077F000DBAAF258F9C96D2FB7619EE9057AE3CA91
+:107800009DAEB21E99B5E6696DB03CB96CA71C641B
+:10781000DF9F89FCB20DE54520C6F5C367B7FD9A29
+:10782000F4C3EE62A600A1BC2B52D248EF37E23A75
+:107830004DC579F07CEEBF83E638E6F94DD6955913
+:10784000C8A7AC7E37E78F51D6C760CD9CF3DB0D60
+:10785000574F2C1F553D3AA73B643DF65D18A69F38
+:107860005668D67A19EC5B7C7C1FB60AB89FB8C301
+:10787000C7E54347803FA7E438F90D55CDD102CC89
+:10788000FBE17CDC11E0F713F44F17E9777BA05E96
+:10789000F87BECE7F3E341C3FCC859D38BF3D14E3B
+:1078A000F8854D0F532747F8FEFE8F2AEDEF1F9FF7
+:1078B000FC644B1E2B4FFD17C3C0FD7A0B1841947F
+:1078C00027D6562E4FBE553E256F19AB7EF19CEF45
+:1078D000E6A17E3CCF964F69DB8E696CBD6932DADA
+:1078E00011EFBEC4E5E31BB67CD9E9EB4DD17ACEEE
+:1078F00009D3790B804ED25F1AE332E58989E3F828
+:1079000053F1699FA6FB335B15BAAF49F9C33C95A8
+:10791000FCAEEFFBEDFB8A7B49AF5102492D97BDD1
+:10792000EFB444F253346BC134DE9BB5253C8B7EFF
+:10793000BFC12A93296EB6A58CC77F42916BE85EC2
+:10794000ACAFF404A87E6B58A57CE174D99E835536
+:10795000317C8A1AEA07697339DD636969A246795D
+:10796000C7EC5FF47D6D8CFC4174FE18BFAFE5F190
+:107970000ADFD843546EFEA446FD839DDF4F2A9A4A
+:1079800088BF2791E8F1DE4BDBFF938FA1BF640D29
+:107990003FBF32435BDEF31CFBDE62AA8962C60F87
+:1079A000ADDA3BFB42585E05144F0D4D7FBD298477
+:1079B000F56FD40C9EAFC5CF4B807D0F724BD98A2B
+:1079C0009EFFC0FE578660AA81F5AB55E4576881DB
+:1079D00017F0DEAA428288BDCF9D25A0DED65A4B85
+:1079E000D77332F8BCE70C5AF2AE54916EA4A57965
+:1079F000344E2B982AD6B76A65DA3F0BC36A37FA3A
+:107A0000170A6DFF84230FF253AEF306EC7FE3D722
+:107A1000CA9EF308636FF4960B32EEE12DB7E927A7
+:107A2000136F99F3CC8F3D938BF0E4AFA59313E7DD
+:107A3000C17F6F6CD6329CD7386D9FB0B39C4C1F02
+:107A40004DC77BC821D5E8CED7F873E19D51D6D27A
+:107A50008BF4304397416778F918F43761FF5B6C1A
+:107A6000FAEF28F2EEE3BFB0ED1FC6A76BA37330A9
+:107A7000EE2182E5EA1FE322960B9E291D799EF2F4
+:107A8000D4CEF19EFAD376147BBE5F98BEC8F3FDC8
+:107A9000E2DDB33CE5E95D9778EA7F6C6F95A73C42
+:107AA000B3FB4A4FFDD907977BCA737A3FEDA93FD5
+:107AB000EF95D59EEFF3FBD678BE5FFADB0D9EF215
+:107AC00065FD7779EA3BFA7FE6BE795394CBA30F45
+:107AD000ABF7E3EF03B9CF1D67DA15E7DDAFF3C707
+:107AE000661DE38410E5F7E9CAB8BFB3F2862F70CC
+:107AF000FB4C5D68E8286F5645B97C5D9F67DE8E5C
+:107B0000F2B532AAD23E2187793D397C05E923932B
+:107B1000763039359BECB681EF18AFEE68B016962B
+:107B2000B8FC5A01AD13304FAC325A43F70A3AED64
+:107B300065CD04CC9F5B15D5B91EC4AC5EBA2F4091
+:107B400067ED5DF36276225D31D1CFEC48D4FF075B
+:107B5000EC443987E2C3CC4E243BD20872BB11CE31
+:107B60004AF4DDF88A40F7F8333B90ECC867C2CCA2
+:107B70008E9C89765BDF169443FD3F9529DEC8FE17
+:107B8000C84E2C6776E2E65CB7BFBCAF089F69D0F1
+:107B9000C6E3B347E916C71691DDF8CF48CF9FD9A2
+:107BA000F8521DF63BBD9CDFBFD731A6368EFA7466
+:107BB000475117F1497F91CCF7213951EAF6031E5D
+:107BC000B0F7AB90FA2DB257D93A905C76D6618B6C
+:107BD000D097C67B0EAD2F04C92F3EE937FEA3C850
+:107BE0006F6AB13A01F3048DFD8A89E3DD6BE3B975
+:107BF000589B59853F0759125FB60F9F17E84C1FD6
+:107C000061CFD2D27BF6E1F37B51327AE122E3E914
+:107C10002A9431EA42EEDF966728E92601FDD20C6C
+:107C20008E2CF689F394A23BF8BD4025F21B487FC9
+:107C3000681D9C6353A8CC5329BE1C40BA10E84968
+:107C4000F4149043B4BF04F0B02A962B843486C455
+:107C5000507FC5BCD1CABC1D44078E5E8BFA6E92A4
+:107C6000DBD10790DE62B5DEF50FA9DF263CB5D883
+:107C7000E7A23B72F543556CDC8E82E23CF4EDA248
+:107C8000DF65994BFE1CB4F7DD477344474F20F97D
+:107C9000B30073190A06F522C60F3BC429086F8288
+:107CA000E2F0814312D9FD81BB3BE97758039AA5E5
+:107CB00003E9FF968EFD5617AF243FE1FFC466919E
+:107CC0001E1CA8FF5156BC05FA2430670F8DCFE863
+:107CD000050F903E0063823AEEB3F5B1A0B9338B45
+:107CE0007D5017B1ED9F498EDF3341E7625BD12FA5
+:107CF00017C6AD4D15319FE7F69F1678EC9ADB0B52
+:107D0000B81F73A8F103CC1E4DBAE0DBC4FA4539A5
+:107D1000DE7A76590DDDBB8ADB4C399E1B2DDB49A3
+:107D2000FEFCB3CD3AE67DD5D9784D61320FC3DF85
+:107D3000240516ED447992C7F42386D24ADBFFE28C
+:107D4000F86926E6F0F8BF6181C4FD773E67DF126F
+:107D5000CFE17D353AE8CA5CFB2A005281F9BEC604
+:107D6000FEAF07CF0F4EE970ED7380FB81B73C6D1E
+:107D700087B77C61DA5B665AF4CBA807AC00E0FEFB
+:107D80008FDDDEEF61307D186F19EFDCB39FE0E728
+:107D900009550601D2775957BAE76B6C7E09E73E61
+:107DA000CC8C7BF5A7EF4993FE7295FDBB1F99F72D
+:107DB000BD8FC7DF019941F3F2ECA3B37C12F92523
+:107DC000D09F64B8FC49259AEEB1AB1CBF50A65CAD
+:107DD0000F1EBF07D817B2EB937EBC37552B43FF5E
+:107DE000435BE1977E73A27CD00FD326A7DE3C4194
+:107DF0007E4EA67FC5B89F04FDD7B7FFF48EFF3E29
+:107E0000E1F267BE1B4DCE46BFC7FD93797BE75EAF
+:107E100055E7DCDF3B35F2F382CEE148BAE0B8B398
+:107E2000D4FA385757D2E3D08FE4F8611C7FC3F5FA
+:107E30007926E9E75B8CA3A9FDACDFAA5FFA01FB19
+:107E4000592C1D3AD880F26EA24C7925DABCB58F38
+:107E500004D1EF89DF59B9AA481F4BFCF1A28FFC6E
+:107E60000EED36DF3BE7571DBF4D2287F347AD6D63
+:107E70000FB09906ED731B41D4932FDECDD6D0B34E
+:107E80001F72BFA1E31F9CDEE5FD7E111E0527FFCB
+:107E9000E84ECA8332E6F33CA8312BD3FB709D3FFA
+:107EA00066AF33C6B72AE70EC659C7AE4AEF433DA1
+:107EB00074869DCF54F6E2F3F493BF20154A485FD1
+:107EC00017611E136B671C903DE746C68040F94062
+:107ED000638E49469AF533E359EFF73270958B106C
+:107EE0003E6F39337EC5D4ADB76F10F0F7535302F0
+:107EF000CAB3ADAB988DC0CAEB72EC3CA40BE002E8
+:107F0000A4DBC552D8C0FBF536FC5CA23C64FF89FB
+:107F100069BFC0382ABCC4F32EB5293C2EABFD4442
+:107F2000329804042D0433678607E35D5F3D67E004
+:107F30005DFB037EB4C7D9BAE33EF404B3FB4B7CCC
+:107F400068C76B54EE62763F969F61763F3EF7308E
+:107F5000BB1FDF7F8FD9FD58DECBEC7E7CFE90D936
+:107F6000FDF8FE5966F763F9C5DCCA2D397330BEDA
+:107F7000554AF4149CB987F21EDB559F86F4932969
+:107F8000CF2A2B6F575730FC6E0E2FA6784BD56239
+:107F90009E77BF256731D9D303FEBC0C7FE8A07F55
+:107FA000AF4F70FC7B78043A6EDBB3037ED2A44102
+:107FB000F71B8CDC8FE9F4437ED6F3FAB1FDAD6F8D
+:107FC0007DE1575F6F669FD6CDD9DE112CC6733F1A
+:107FD00029FEDDCE3FCCFCDDAD757B1A291F501983
+:107FE000772C85EBBAA73C4CFA06FE2E13CAED4C53
+:107FF0003BD1B10F33F571E799B91F66E6CB446CFD
+:10800000BD64A4FC8D6DBE14C5B7AD46265F70BFC0
+:1080100068482F7CDD77BE7F77B29697714E99E7DF
+:1080200067F90FF2BCBD0E486AEEF93BE723C8E6DC
+:108030002BE67E46B77F375892A6FB1B826193F4EE
+:108040004581E991A4576A498A17B60DF1FBDAA771
+:108050006C39D138EE1ADAEFDB5EF491BE556DE77C
+:10806000C9358F53A9DC3C6E6E9CF22B2373D5BEB1
+:108070002CFD6C88140FBBBF4A6CFFD787D9FF2536
+:108080003F3F17D6BC6FBE8AE7A73AC2AB7BD16E23
+:10809000EF88C7284ED0336EAEE77E72295E41F777
+:1080A000594861AE674B7195F46C19E75F3658DF3C
+:1080B000A9773087D30F6373F26306C29D54CF2F25
+:1080C000274CF4B7F8633C0FD9AFF1B862B0440461
+:1080D00035CB798D1EDB2FDE5196D4D0AFD31197DF
+:1080E000E9DC47873E6BA8B82CBFEF42F3FA079B49
+:1080F0006DBF43739D427A61A23E57ABCEA7730B0F
+:108100006790CF3BC24D2AC669FF3F82909C4F00CB
+:10811000800000001F8B080000000000000BCD7DD8
+:108120000B7C14D5B9F8999DD9577637996437C91E
+:10813000E6C90402060DB8818487C6380991A222D7
+:108140002E0235B4B42C0414E415D1B6ABD5B2214B
+:10815000098F2025581F282DDD50B02FBD8D96DEAC
+:1081600052ABFD6F04B9A8A8A97A15FDA146B43E8B
+:10817000EECF6A04BDC547FFFCBFEF3B33C9CE64F9
+:108180003604B5F77FB1653833E7F19DEF7CEFF347
+:108190009DB38EBCCA60CCC758CB3FC5862E2F3C42
+:1081A0008B18EB8127934219AC9C318F2C3096CDE4
+:1081B000D869FC73317CEF76ABAC129ECB1C717727
+:1081C0000963E168454EFD44C6166685990CF51CA9
+:1081D000BEC5720CDADB1953B13FBD9DFE0C627F48
+:1081E000558C89F26F6BDEF20FFEAE3FC5F41D2C8D
+:1081F0008270944A6FF7BA18B3294C386D8332F302
+:10820000CA6F9FC7E8CF6911FFEE09867DA9FBF110
+:10821000B9FEADE6AD8983DBAD2AEF75880A639BB5
+:10822000F7748419943F131482CBCE626A01CC6B2D
+:10823000F5FEEB5904E6BF55EA71C900C7D62F8495
+:1082400085E1F2C1FD2FD3F003088B219CF0C776A6
+:10825000FA7CF85B618A63126305F866243EF9775D
+:1082600018A5FB34F45F91807299060FFC7FE261E0
+:1082700063B9AAC7589E7CD458662C640F8F63ECF0
+:108280008575D0E9398CCD39F6DE3196CED8DC58FB
+:10829000E8F147038CE5ABAE705C666C1E0B3DFEEF
+:1082A0002A940B1A3C2C1182C16D6C19AE0B4CF345
+:1082B000A55280AF8111ACAC60591A63AE81FEBF8C
+:1082C0002B67123E1A7A17CD64E319FBF1CD2D8C82
+:1082D000413FB13A21BE17E09F5DBF67F62878DEC7
+:1082E0005B692BBA0F1B45EC6FE1FC5CD0D9699838
+:1082F0006FA6EDFA1123A17E789A4768817A3FBE76
+:10830000E0DCCDA550EE993E3A8478077CBDD53FA0
+:108310001FC0FFBC306FAF8FFF6CE589B9A3E0B918
+:10832000B3F2A1D9F89C935C1FFA9B35A5B3D90190
+:10833000FD5DB9529980FD85EB8DED0BAA8D6580B1
+:108340009CD609E7EBCF1A0CEF99E0318FAFF777A6
+:10835000EF3A85F0CFBE007A007C86F113B40F4B64
+:108360007D5208F09C5F2DA871A09B0255503B2DBB
+:10837000F8619B463F66FC8BB10C867C56374F8C70
+:10838000B743957C979DF09F3F53882B307EFEB27C
+:10839000BEC469287FD3658F8BF03D2BB34BC0EFF4
+:1083A000F7AE64ACA384C04BAF4D5ADF7B5D6DF676
+:1083B00062F83E2F4F6436A003563D8AC6233846E6
+:1083C000123E8E737CB8081F052B438FFF0CC6BF6F
+:1083D0007A8A5316A1FED50DFCBB0EDF5609E80CB8
+:1083E000BE6F053A8B119D49C793F133E7D8AA5563
+:1083F000488F734CEFC7CA8CE8EAEF538F8E29067B
+:10840000B856091D333C008ADBDEC4182E346010D8
+:10841000E95AE7471D4FABF635133F26F199FD3476
+:10842000F233FE3B8750437CF698EBF732CA8DBFA0
+:1084300064F6EE6440C2BF9059ACBE9AB1FF93D6C9
+:10844000779E00E5DF74346CDA74117C77F7FD9663
+:108450005530E6DCF89D19338A06CA69EDCB67CC46
+:10846000B808FBE3E3C014627CBDFBC725FAE893C0
+:10847000397C5B54B65D84B26493B7874A06DA658B
+:10848000613B61887661B65DB268E7D5DB019E36F7
+:10849000C0FAA569F34AD3BEDB347892C797106F50
+:1084A000B2E215603DA4E9928CF4F255E1C839D3EB
+:1084B000BC236CBB7DD4E0760076B30EBFCD1AFE34
+:1084C000387E4F1EDF3E04FC5F373ECED49F43FB19
+:1084D0007ED6F041F5F539A9E78B70D9515F298A2D
+:1084E000D796D4CFB6EE4F9F3A1F88579ACF426E99
+:1084F000E843B2AB7208E8BC5CBEC3859D4B99F5FE
+:108500007204F86133945578BFB9ABC3A5C0FBF2D0
+:10851000D2DB3721D19727D218CA83714CCEBC1F2A
+:10852000FA1D274B2C81AB76D1419B07CAEC0A166A
+:108530001A0DFD6674A7913CC92CB9E017028C9BFB
+:1085400099E952B1BD2773D22F18D10753A4247CC7
+:10855000786A5FA8F3205CB35908595112E2AC164F
+:10856000996C2C637BA19C79C91E560FE5097FF796
+:108570002922F2B4C4F55D3BB6473DDDCA0EA17EAB
+:10858000C9D3E4CF2687BC9DF4C7751243FDE1191A
+:10859000778780F0DC0B5D89C097E5E559B3EBA1E7
+:1085A0005C7EC41652149C4F87508CF3098AA4B782
+:1085B000747CEA7264C24709CEF463597C2FC0DF31
+:1085C0006A8F27505EC5A65E2DEF0578F29724C905
+:1085D0006BFCAB0F7080F03E7DD5DEF612A46FE928
+:1085E000ADE4FE323E8A27509EB1DA8630B60FCC1B
+:1085F000940CF23F4D936769263DD09A65273AD196
+:10860000F50153254586790BDABCD98FC2A40F9C9E
+:108610002CE47290BDB280EC1081F50AA73D307F4A
+:10862000AC887017F1790C6A3F89B767C1900BED80
+:108630001C675A5313D6878F59CD805CE1BA341525
+:10864000F5B3E060AEBC09306F1B8B74019D340B39
+:108650004CC2F2C0780986E3395D9E56B4BB1E73E6
+:10866000B5D8107F2D87417FC03C36DA19B7FFE4BB
+:10867000902B0BDA4735FB6D6DC5C85C2C67E4E8C1
+:1086800076615846BA5C9B5D9A8BF661BABFF7DBA0
+:108690002867676EFFE30C17CAD53AA87301E89DF7
+:1086A000CC8736C540EE3A4F153025C9CE734A4DBA
+:1086B0000CED29E7A962C3FBC43A98D1390365D50B
+:1086C0006BABC771D6642A84D75A26B762BB5A40AF
+:1086D0008692B42ECE53794C9968D57FA1E17D0264
+:1086E000EC24C5399CFE3D4C294BEE7F548AFEC7D5
+:1086F00098FA972DFB1FE8D76FE8B74D626447C71C
+:10870000025E5A77B35DB031B3EEC64CB4479DAC50
+:10871000A9CBC2EEDC906923BADB186CEA51A17DCB
+:108720001D03C6073AB9F88BE322237B06560AE8F5
+:1087300085154A7DFD743C12EB71FAB5C50486724D
+:10874000E962C96EE0931A662C9BEDA27361AD11CC
+:108750005F365F650FD2CFDAEC34C56901BFFEEC3E
+:1087600059C76A4A47C37CD3C2CB18F0F1CFB71FB1
+:1087700076B505A19CCEE9E481EDAFCE88C1FC7A47
+:10878000044E7F6D011BE1255C97DB2926F51B76E6
+:10879000B0D12817C348DF5E0E0F8EDF935DB8BBE4
+:1087A000DD627C10BB06FB61B62AD49426CDAB47B4
+:1087B000B383FBC79B56D0897CD03F9E9355D1781D
+:1087C00022E03F79BC9C2F37DE5F717EE503E3CD6D
+:1087D0009E6E9CDF6C874CF39BADF1AF3EDE5F710C
+:1087E0007E255F623C9C5FF278DF30CE6FB653A689
+:1087F000F9CD16397DF58F97F3E5C6EB59574676D7
+:10880000F04607C827A093B48A7DAE5130EE469754
+:108810005D16948176B5B537B8E6A2EEF54E9B9E0F
+:108820000DE3D45D0295F3B19769D36B4B19DB2E41
+:1088300070BAE8CBFCAF4DE8479E9CB9B68CF48982
+:10884000665F5F8955411F5F29717867157AE3CDAF
+:108850004978BC17E4880A70FC14F85D057EDC05D5
+:108860007C89E5F8BA203D7783BD8ECF3D002F7E11
+:10887000BF6F5D88CABF5A37859E7A3F6553B8DDA2
+:108880003EB6DADA6E3F2F8BDBEDDBF3E4F94B50CB
+:10889000AFD5A685502FB229173235D9AE664D8F88
+:1088A000B9E1FBD66FB20AD48D637670B803F5399F
+:1088B00064B7A7551CEC5907E58D925D41BDBC51CD
+:1088C0006133ACFCE631A867603CA793B7671772C9
+:1088D0003F2C10EE3D887A6F0EDAE980D7ECB9BDF7
+:1088E00007D1FFBB0AEC72D2CBEC8D83AFC2F71776
+:1088F000C0FF6BC7B2E865329467CDC9A6F1E14FFE
+:108900007A6D0EDAEFFCCF4F669E20BF22ECE67A3E
+:1089100021C0663FDE8DF0861C4A9CFA6377869103
+:108920000F54BBD24EA2206C473D9D8D7A1ABED704
+:10893000BEE1643684EF1207C9B5B9738D7EC37684
+:10894000774246FB677B45803543FF57CD347E77C2
+:108950003A39BF854D7EC32C5319AC2DAE77C50572
+:108960001968EF6FC4575307E32D7AAC79E3C1243C
+:108970003A55B27C81B73DB8106C0CCAB34F58F968
+:10898000B67AFC589845C68AB9FD3FD6C5361E044E
+:10899000D4BF80720FE5AD83CB8DC1FCC1E1A9D1FD
+:1089A000E4E3BDEB7A6ADE1A3D005FBE1417500F98
+:1089B000142C83F749F395027101FD1D26DE5F81BA
+:1089C000FE8D791EF70AF7E7318BF1F4673E93DEEF
+:1089D00046BCE052A23C37CFB766D07CAB9F2D653A
+:1089E00056FCA46C477B6ED66131D4AC0CE0439F3F
+:1089F000FFFF345FBDABE19BA90196007A7916E8D1
+:108A0000BD9DFB310CED549D5EA102D94F575E090F
+:108A1000DF912E54B508F1F9ECC8BE3DD7603B900C
+:108A20001D2DE8EFEA7650E2651BDA415FB6DF2BD9
+:108A3000AF7390BDC558BDFC76D9407FA9D607FB62
+:108A40007D3B497FF6DB89F8679226FA10C6E6502F
+:108A500090EC819BC03E467F3F5AFF9E94CEBF1F45
+:108A60004FB253F1CFF1A4FE5ABA7F2D280057E739
+:108A7000BAAE9AB7EC03E3962C936D6D68CF35C709
+:108A8000058A4324A01ED803239729B656C0FF1297
+:108A9000EC07E9D324D747B6423FC9764AF55CF9DB
+:108AA0007EA087D6F2BA8E103C37EFE0F132BD7E61
+:108AB0007FDC2C1023FFDCCE9A9800703ADC3FFA62
+:108AC000792FCC476D9198BB06CA766EEFB0577D73
+:108AD0002417446FD32FF17B3006720BE75DD7F478
+:108AE0003B2CC76C2CDC02CFBB3DBC7D5472C94E05
+:108AF00058BF76B975064E3F272F726F168CD796E2
+:108B0000934672D0F19A6F37CA2947E6846568F7B1
+:108B10002C88FE308CF148D9CF16862DE86B816603
+:108B20003FECD5E8EC983D519409704FCFABDB9BFF
+:108B30005565513FFA23EAAF46B4B6C31ED5FAD9FC
+:108B400069B3960BFF9EC5E39D57AF7AE8BDFB6006
+:108B50003E9E526F08C96DF3F96C9F601B5CBF3B72
+:108B60003BF287ACA478ABBB5496280ECABAA6A237
+:108B70003DB7F9F39F76FD0E509EF5B997E46C96DC
+:108B8000E88B0B2586F68F26CF436FFF974F5F0C40
+:108B9000E2FAFCC5CD48BFB2D8D397AA18D7D4CB38
+:108BA000F046C072A65EFEEDA5E86F0E94AFB9B4B4
+:108BB00016CB48BB409435FEE866D4CF5B05A611C2
+:108BC000F14DBCBE9DD72FD4BED75CF6FE2FB6A10B
+:108BD0003E98E4203F74AB6607E9F0A97E91F0A3CC
+:108BE000FA87C6E36B1A9E5DC3C7E36B567838906D
+:108BF000A7BE8EF875B32E01E9D8FDB9EB466C7FA0
+:108C0000CF3A165E02B0EF54F6FD7A9B42EDDFB626
+:108C10005A87F3F3D477B2088EE3BFD80670F8749E
+:108C20003826B31B53C0F1E150EBF9A71C2EE7BE69
+:108C300015E0CF2CCDDE74387A82B3E12957DE758A
+:108C4000830CF2664349578355FCF9333FF70332EF
+:108C500053C4DB037E4E7FDDB9E1D30847ABFC9004
+:108C60000BC74F135818EB6F99D2CB84A47E4301E6
+:108C70008E6780DBE987766953998A74E663BE382C
+:108C8000033AF35572F8B7045F600AB4F395C1D3A1
+:108C90008BEF7B89FFD1E5E0F400820ECA0E8D3E9A
+:108CA00002FEAD97A29D9F25EAF457D48EF4E2B060
+:108CB00069F563459761B9338B9727DD51D41E2B36
+:108CC000043DE380362817F21D64EF98E75718E05B
+:108CD000F3DB96ADE6FBB32DF0E9ECA575DA3ACE01
+:108CE000118AC1BAD6D87A1A1AF1DB655EB2D7E01A
+:108CF0007D433C69FE976BF8BADCCFEDADAD9FBA12
+:108D00001AE216EB918A4E276AEDCF824E27FA2D92
+:108D1000E803E8B412F19F44A71F336B3ABDD06F4C
+:108D200041E740A7D5F8DE8C0F735964EA8E450001
+:108D3000A0F4D9F45F6D436D7579F58EDFC1B3E6AC
+:108D400073AFE4873AE2184676A2CDC5E5FB80DC36
+:108D50008F5C86704B7213BD17BD61DAAF792E2B15
+:108D600045BF9327ED40B9358C7EE721DCE67E4B8D
+:108D7000FD8CD6A3E6326F246E81F77FFA256E1F35
+:108D80000778BD54FC322E60A3EF29F945A7FFDC1C
+:108D9000F05284E34CFC523FC02FAB86C72FFB88B8
+:108DA0005F3CE59C5F3C29F80523D1289F3794F070
+:108DB000F28FFCB9C40FFDFCC3CAE87B3FFFB0B221
+:108DC000CBB0ACF3CF658132AA6F6E9F8EF3B6C085
+:108DD0004B9B5F9F47B815D7553D4F6E15C9DEE8D1
+:108DE0006528A73A595FB713F9B05A08ED85B7B3AC
+:108DF000623DF52E05BFF7B0D9607F6CD5E87E17D0
+:108E0000C283FED0242D9E25F5B0AB7C83F9D857C4
+:108E100099288B24E17FA486C76F07C277E0F89D6D
+:108E2000AC772CDAA5A9D6E91E6DBC9B82EA3D562B
+:108E30007C7F26BDF328EA9D6C7CF27EB23E7735BE
+:108E4000A11C30F379CDEA87DFBB6F887E1ED6F098
+:108E5000F6D0D9F3FD4329F8FEF726BEAF14465AE3
+:108E6000F2FDC329F8FECF567CFF15F8FC3FACF8A5
+:108E7000BCD33F3C3CBB035CBFBBB5F5FDB2787EC9
+:108E800047C3EFEBFEB3B6035EB7C213E0B9779802
+:108E9000787EC76A9D00CFEFFA69BD6D31DC17405F
+:108EA0007E47FF7DD3E4581FEE875AC0D197DC8FF1
+:108EB0004BE1FD8069FFB100745EF3D9A650C48216
+:108EC0002FA1DD3F92E1D7DBDDE397B5B8B3723D6B
+:108ED000DAD53B2FF7F2FD846CF5732B7EF80AEBA5
+:108EE000EF0C58C8E31A1B9743DFF6BF4576DE57F1
+:108EF000E8DF6FD5FF331A7D9D49FF8F49D2FFD838
+:108F00008F59DE75321E4FD9961D290910BE7A2F52
+:108F100045F9B4EBE62C01FDBA423521A0FD9FAF27
+:108F20008D77BB5F21FAD2DBED92128284F59B64D0
+:108F3000212618FA3B6FA8FECC70007CE30324DFE7
+:108F4000D4F3F1798FA6CFCED61EBA30A84E0E70CC
+:108F5000393D15C757CF31CA697D1EB67017EB452D
+:108F6000FD02EE77DC82AEF2357D09FDD4513F9AE9
+:108F7000BCBF20206BFE29EFEF6CF50DC07739F6F2
+:108F800007FD5E61059F192F6782F3960138AF0ECA
+:108F900058E825737FBA7FADAF13E9D3A4B8CE12DA
+:108FA0008D5E80AF1A113E579B2DC60203FCABEBC2
+:108FB0006B904C69D8FF4E078FA3EE5C797B2DE652
+:108FC0001B74DE2257204AF297713DA7AC2CA6B83D
+:108FD000EA6AAD5F33FCFDED1D5D632796D3B86B88
+:108FE00071DC8BAB5902E54606DA09147F90258CBB
+:108FF0002F64393B821897DD2C74342C463D7AA9B6
+:1090000097F42D0BCEB58C4FE94F3DFEA4CF9B05B9
+:109010002BCF50BF99EACB9E8E26B493865DDFD9C5
+:10902000616957FD44B3AB607E3F1E12AFC100C5FE
+:10903000B774FC0E1E87AF5F6DB849407CA795C31F
+:1090400090C09269E10EDA6CB595C6592FDA4F657A
+:10905000402FD4DF0B9671BF81FE36E8707522FD7C
+:109060007C55B8F47AA9C7E3F570FF8CE21D5E2E3B
+:10907000B7E803944F1CF65BEE1FE8CF8DEB645509
+:1090800002FD73425632305EB851D383E09905AF8A
+:10909000F2FDEBEB0DCC23CEE39DA6FA51C6E99E83
+:1090A000055D64DF61183E996E8E6A74B02D27FCF1
+:1090B0007480E4482884740DE567495EBAA0ECA387
+:1090C000F25FA92CF7979FA7FA415E9FC9F2B0F013
+:1090D0000CED5EA176527F3FC7A8ECED1FF7351A65
+:1090E00027D05FEEA5EF85BCFE70C7495A573EFFFB
+:1090F0001E91E6FFB1A466E0FEE837A38D14279A1F
+:109100001F5D4ECF4DEBE45A8CC73DB3AEAFB515E6
+:109110009EDF9CDF28A3DD3F7FE94F68FF5EEFFF06
+:109120004AF42B90DF156906D94525B6F01EEF00ED
+:10913000BF0DC0D1AAE9FBDE7AA42397CAFADA2BC5
+:10914000A0FD948F5A5B0D794E1D943FE356A4CF3A
+:1091500092E3EABA1CFCBB433D1D383B3A36CD973F
+:10916000B18330FEC7DED2788CE8BA4EB6E2177D06
+:10917000DEA9FAD7E79D4ACEE8F8D3DF6F2E9D200F
+:10918000F3FC9FB8012FEED1F594EF73A5A0C1E9D0
+:109190007369FCC6EBCD82711E2A27FA50907E6758
+:1091A000697E9C592FE8E3FEDD1119938DEDE0CD2A
+:1091B0002D132CF03B4CBC1D5DB72C5C6F4779DC4C
+:1091C000E5A6FD7B26539C5FAFD79062FE75D95C08
+:1091D0008F30A74AF3D9726B461CED8E2D8BFE2083
+:1091E0006370C533EEE32ACCD7F4087D9F2C46F993
+:1091F00072AB8FF2311A167D52D59CD4FFC2037F19
+:109200007261BCB761DCFA6C8CBB2C64D2C7C9F943
+:109210000EE6711BA2AB896E63CD428395BF752CA0
+:1092200087F3F5424C9111A9BFE3C9FBC88B9409A0
+:109230000E8C4F2C8A19F77340433A903E1A379997
+:10924000DF27EDE788D83FA379C770330FF55E9B22
+:109250008DE86D27E00DFDC0625097F83C9693A510
+:10926000F1410FE1F35F0DCFB11C6E0F395D2CE6BC
+:10927000C91AA09BDC480743FDE4AB14687F33E0C8
+:10928000D3F323BA484FDDE1D5CBA0B700FFE1729D
+:10929000CDCE29E5DF6D5846FFC7D373D0067CDC01
+:1092A0009EFDF865C1B1D05F79246893A9FCA44400
+:1092B000F6212F33F6F89307C99E95CF1542C0FFCC
+:1092C00052F793878BC89FD7ECB1EE27C91EEB2FBF
+:1092D000B30483F974A6F597555710CA23FBCB3115
+:1092E0002CEFD2ECF8F6ECEE275BC93E09B7652708
+:1092F000E9EF5AC6E3CB5FB77EEC0C2EE9C07CA247
+:1093000058A98DFCBD34133F3E98EDA07A637223BB
+:109310007767C373D62D7D12C61B1C792F04500EA0
+:109320008C283DA18E04FA1F51CDD36458191FB764
+:10933000B3742DD90D9DDABAC0FFD6A3DE1B589F9A
+:109340001ED3FAF0F50857F6D0FAF8CA7B68BD6C60
+:1093500058A6B81FDF8FBFA292DB1BB293EF2BFC86
+:10936000269BC75DFF942D6A4FEE976694DE4EF103
+:109370001DF70C1BD5CFD09E6639FEA76CC9A05730
+:109380000EE445FE909D64B7C2FB705925CAB740F4
+:1093900016EEB3D6964A37223DFF5CF34F619DEE41
+:1093A000A0752A09A445F8BA3D62B96E65C35BB7DA
+:1093B00017D745485EA55AB76FCE17C35671B76722
+:1093C000353C7CD0F0B7BB902D57B9FA1CB80FB321
+:1093D000B974BB21AFDAB56F760273A1F5BCEAF5BB
+:1093E0009EF46A94DBE6715FFCE23F0288DF999F9E
+:1093F0003A2DE5E37F6BF2F185750DD40E16589189
+:1094000072480E309EF7D29F27269C76D2F45EC417
+:109410003CB4EF12EB333637FC06ED572F0E8A0CB7
+:10942000F7C71732635E198BEA79C13C0FF645091D
+:109430005C5340E18B31210498628BA4D9BA5C3132
+:10944000E487CD9B3BFB10EEC3376AFBF0205F0C3B
+:10945000DF979AF2C6AE6E5814AED7BE9FA4BFE394
+:1094600034AFB90AB71BE77ABDA45FE785E787EB9E
+:1094700093F6E35EFAA76899875E97A3E3251CAE8F
+:109480001F3D182F8BC3824356CE8C1F333E6A2557
+:109490008EAF451ABECCF831E3A171EE6C5A7FF362
+:1094A000FC5F7485093F2F027E305FD88C0FC62287
+:1094B0005720DDBE345F64681F4F1767DA314FA055
+:1094C00071B6C030BF68290BA5F3FC6075D625497D
+:1094D000F09AF168C657E3A32C94807E1BEFF4D179
+:1094E000FA3DA7E1474C7C48F30AC3BCDAF9BC8ECD
+:1094F000F3FC5599E675955AF17800BE475A41DA62
+:109500002A567A84CF6731CCA75D1EAC4F3E61D519
+:109510004D48274B4D790B66F8CCF0CF4439387560
+:10952000F03EFEE41C5F80CE2F8C67216D1F3F83D1
+:109530008E3584B287CC5B18E0734E5F0BA3B3FB10
+:10954000C7C37E0516E92FCB80DF994FF8B7CE83CE
+:109550007FAF0D8A0AE609CE9E3FAA0DE71F66E19E
+:109560008C4409DAFB7D76942357313063A1DDC545
+:109570003049D4B7E17A3795F57E4F747C64273D46
+:109580001E614D7B69FF5DC9983B2EB57C591B74EC
+:10959000D078663B6566C5E80C9417667CE878FA77
+:1095A000568E96DF309E8D3F1BBCF4A0EC457F1697
+:1095B000E368B08E7DCB19DB5D31B07FCC0A556E90
+:1095C0004FE630DAFF5F9D93A9D91D4D147758A05F
+:1095D000E9856376D6F0A097EF234F48928F0BF37F
+:1095E0006A57E724C5FBF47D642FEB25FC7DD7E5A6
+:1095F0004D88E389EEDEEFA70F925F7ABE6684F2B4
+:1096000035C58C950AC5C53CE9E35906D8C58CCF4C
+:109610001BFC989B7230AEE7298EA31130F3895F53
+:109620006C9AA70CACDBE6257B3B105CF7D2DFC75E
+:10963000A87385E77378B475ABD5D6ADDF8E2E836E
+:10964000F749F83DD1A1D961655A1C1FFF40F94483
+:10965000A91A1FCA7FD5D7D15D06FE87218FB08397
+:10966000F0A7AF2738117DC89791A04439C336E6DB
+:1096700022FF387213CFC758C8945D981FB4306A60
+:109680003F91DC4F244F2238229BDD5ADC2444FDDD
+:109690002CCEE3FDB032EEE7F5D37D0CDA27E53FC3
+:1096A000DA5C604A62FB4C1642FF09FACB417DCF7F
+:1096B00036258D3372F0B8A9FA33B713B5FD5BD1F7
+:1096C000190A8592E4F46F72B89E3C11ACECB28D2D
+:1096D0004C8DBFC52EBF2A25E5C51ECF733558C595
+:1096E000C5F4FE74FDDD6F27C6963F956C277A376B
+:1096F000343E75F8A2243B31D6F814C515F5F2595D
+:10970000DA89CFDFD5F8542BCCEF1FAF7E83F2C7B9
+:109710004F3481C0043CFAA3D3D89B7E940F32E926
+:10972000AFE206F0A830F95B52C622BDBBA305AA82
+:1097300094942F7B2C4721B8FDA52AED9741D32E79
+:1097400074C5FD524840BCDDAEC5CD8070C7CEF6B5
+:1097500025B7E37E883E9ED325131C0E7D3C166AFA
+:10976000A6FCFA998CF4889E07A2F3B5DECFBB392C
+:10977000C678DD30F8F9DD9CAAC1FC2C8A4DAFDF3C
+:109780008A72E22991FCB0EF046FA2F7E678C089F3
+:109790001C6E1F8E102327502EF4343CFF9D1F405B
+:1097A000BB35FB9C2154C3ABBEFFDE8FAB14C4138F
+:1097B0005FFFF94B1BEFACC2798D9664DADF28E2CC
+:1097C000711847B340FEABBBC411DE07CFB703B57A
+:1097D000237293E07A3B504FE59133385C27A0CF5A
+:1097E0007605DB6D6F207FD1C7F7BD4F280A9DEF4F
+:1097F000133D8CEC09D1C99F99B9DC2ECDCCE5780D
+:10980000766B4FD729811609E9BA09F72DA418E517
+:1098100041BB4E49F4DE210896F69ADE9FEB140810
+:1098200067C497C7DCDE41EF713ED85EF433837DB9
+:10983000938FEDABF0C9E9DD75CAC3E1F09BFB493D
+:10984000E7EF35FE33C37163CEB462C4CBDB017581
+:10985000442E8F6F7339EC7DF2A8307E38F298E792
+:10986000EB5F9127B928AE77AB101F0DF2A9BDECC5
+:10987000441BC9AD1257139E934AB29F047EEE86D5
+:109880009FAB18B04FFB2E995389D16BA6DC1B1AE6
+:109890006C6FBD5EF9C9BC3958D0CE4F7C5797BDAF
+:1098A0003128833DF79A565CA48CDC80A1FE2BAB5B
+:1098B000B97DD688F65988E496C1EE32DB675ED072
+:1098C000F773802E96062519E9C26CA7B557CE23EB
+:1098D000BBA61DEC1ACCD71E6CA77179735BD4C6DE
+:1098E00054A8F74CB5487EC63365BD4F5C8CFA6210
+:1098F0008A5D217D51D677DB1CFA3E91C6F16AFE66
+:109900001DD4E7E71D429EF86878F76CF59BDEC62C
+:10991000A4F57E66CA9B63D12FD89522BF428FD310
+:109920001CBC99E77FBD7E87107722DE6E116DD853
+:10993000EFC20A1FE5AD5E227A699CC6AD62DC49C2
+:109940003854D32FC919B01B99589DF33CE2619B41
+:109950009DE1F9C1A21B7B0D76EEC2A8D19E8B348E
+:1099600081FDA39CBD1D68B6FFCC76CCDA5CCDAE84
+:109970009BC026A0FDF2CCBAFDECCDD10376CCACD9
+:1099800014FBDFBA1D7381ADEEE65C1E17A4FD83E8
+:109990005992F5FEFE559A7FCA42DC1FBC447C9F5B
+:1099A000D6EB444852107FDE9B9EA4731DDE7F8A57
+:1099B00061ABF1B6E7727F7C978391BCDD35C14323
+:1099C00079D7DD379F9BDB4BEBA5DC5D8DEBFFA4EF
+:1099D0009DE4602AFDE68E8AAC1426E68B0AF4D458
+:1099E000D77344D4CD92F5C38814790ABB73B9DC1C
+:1099F000CEBE85D9D0CFCE8C31D5CA2FD5EB813F05
+:109A00003A1D63D4503F9109F0AD2EB551DC5FF79C
+:109A10004BDD767EDED7FEC8F531F44F47007C087B
+:109A20008702F0A11C2E897AA83C32EAA7E7A86831
+:109A3000263D4BA305F47D7474143DC7444BE8FDEB
+:109A400039D1F3A85C169D48CFB1D10A7A9E1BBDCF
+:109A5000909EE781DEC27AE5D15A7A8E8B5E4EEF18
+:109A6000C747E7D0F3FCE86C7A86A2DFA6EF15D1F2
+:109A7000467A4E882EA2F713A32BA85C19BD81CA83
+:109A800055D1EBE93929FA437A4E8EB6D0734AB4F0
+:109A900099EA4D8D6EA1F205D19FD0F3C2E8767A96
+:109AA000564777D2779D9F3D9A3DFD74708F4CF954
+:109AB000F62C518EF231151FBEA1E9856FE4AA4F35
+:109AC000A03CD5EB1DD1CE1D98EBBD9A3B74DECDED
+:109AD000D15C4E9F1F848EDF85C769F575DB1C1C2A
+:109AE0003A8EC0CA0367D8B7E2F33B9CCBDBEF9258
+:109AF0003AC8DED8D5C4281FCC57D923503E43508E
+:109B00009A61454799417EBE6B4C6EE45D9CA737D8
+:109B1000EFAD83B81F7565AC27300DE92514489B60
+:109B200006FD8D68B5917BAD3059C0B252CFE404CB
+:109B30001B88E7807D65D06BEEA04D8BFFF4CC9C3D
+:109B400088F09C5B3A81EC576D3FF9C8CD2319FA38
+:109B50001DBB1C09414279B996B1643B7CD786C5CF
+:109B6000F7259FD370071D9C8F36B1C7304E56D254
+:109B7000A1D4E179C2513BD4C730C573743C52972C
+:109B800006E5737E157B0C9F63BBE2751E789EB75E
+:109B90003FF118BA4FE312BD755E289F7F981DC034
+:109BA000F053458F32CD07E58947D503B84D52D5DF
+:109BB0001B9996AE203CF196748067D76B60684124
+:109BC00079CAFB1D22B82503EB0F76DB8349EBE254
+:109BD0002EED5145F867E18D7205CAD95D52AF3B54
+:109BE000B37CF0FA74E2BC719EA057F66AFBE8728F
+:109BF000D27A5405053D1E9817AC1A880776B63EF2
+:109C000047F1C0CE34B916435D7D973079B7827481
+:109C1000CCFD84B4B691A49F74BA03FC1AEC49B786
+:109C2000D6EFAE7E7BD31ABF55FFCBF07B50A3E7B8
+:109C300054F87D1AE79177663E9E1EE47615F07122
+:109C40005D303B75BD15412E4FCD78DE25C9E7123D
+:109C5000BEBCCC16AB1858B76B34FA3E135E23FF6C
+:109C6000CBF07A517068BCB24A3F8F336BF969A967
+:109C7000E4CD9114E744BEA7E13149CEF178A90CB7
+:109C8000726E546A39578B70650F21BF52E43BAC3A
+:109C9000D7E8BB3B3B1C0B669F39AE7F9B4DAEC5E7
+:109CA0007C97D878467E02D897AD98BF3322A64CD1
+:109CB000A06D2C14CA88C709E7919F5E02F686340E
+:109CC0008161AA63029F575466DA1697635E83C662
+:109CD0006FF2A26032BFE9FA7E801F75BAC8EAA4AB
+:109CE000731640AF984FD8ADE169A01F1E8FD87092
+:109CF000537E677B921CEC0C155059AF9F8A7E5F98
+:109D0000D7E9B7F539DAEFBFA2DA3ADFE4CF41514C
+:109D1000CB3BEA5391CE63354CA6F3CEADC7493E5B
+:109D200065827C124A787808C72F8CA6DD8771DAA5
+:109D30008783399A3F2EA77DD3F7FF8F9EB781AFD8
+:109D40004E7E66B5DC8DE72A46801E52504E560385
+:109D5000EC95A8E71CB4EE0AE3EBA854B3784220D4
+:109D6000BC25D06F8ED9F8F98C238E2E95F48E23D6
+:109D700053C6FC93EEECC813C121F842F62815B87F
+:109D8000A8AF0457CDF4E6615E8E9C86E597A07C73
+:109D9000DB14CC13EA655AF936EFD42F1F7F7865B0
+:109DA000C78A23B84F7561503D8AF0005DBF827449
+:109DB000AD9E234B141F1EE6FE93CE9F03FC24573B
+:109DC000E8FCB4A89CE4E15BC1A4FDAC54F6CD2E44
+:109DD0004D7E7E121CDABED1E9FEACED1B0DDE37E6
+:109DE00035B9948AFF673EF1FC8E3D6C20FEE7CBCF
+:109DF0007FB14752D0DE9EC6DE9C8871AF1E4EF703
+:109E00008CC7F9548CFF011DB82B5DA6B8AD30434B
+:109E10008BBB0C19AFD5E3C97ABC4F8FEBA56B7424
+:109E2000851706A01E4F9F224B8BA9BF5E7615E6B5
+:109E300037E5D90C7C8D720BF7E75D6D59D2C8F20E
+:109E4000817E196B2239D5D9C0E4F64CBEFF9A0148
+:109E5000F2A5633D233F2FF68C48FD9F546DEF61C3
+:109E6000CEF7C94A4020CA059529728E760E8188A0
+:109E70005C267A7532D685FE36FB51C8E5C038F7C8
+:109E800067025301EE239F89F49430C20D8DAE0812
+:109E90005584B0716D467508F703C537A10C70D6AF
+:109EA00067546760F9C89189216611BFBB3AB2C88F
+:109EB000105F32E3A9BFDE77DA285F61E719F63F6A
+:109EC0002FCA73E876E7E43CDCFF5CD2D7EA5006A1
+:109ED000F63FF57DBDBCD2872EC57B76F25672FB70
+:109EE000339FC59B93EDA6A4FDC5DABC2ADC4FEFDA
+:109EF000DF5FEC1993BCBFB826FF163CBA7F4FFF5B
+:109F0000FE62A412EBABFEAE0AA44F3D1FF688839F
+:109F1000EF03B0894F05140BFA5850F17836D1A3EE
+:109F2000E64F0CFAAEC5CDCC7EF09C3C631CFF64C2
+:109F3000684E46023FA688E3EBF13CDD0FC6789DF4
+:109F40006CC97746FCEBE32F10B81FCBEC02C93B82
+:109F50005D6F823C598AF88666148F569D02E56BC8
+:109F60009D0C352AE417A5902FFDFB062C31DA6AEB
+:109F70009F75819677627EFFA33CAE9716D8799C39
+:109F800052B87E6904C75D90E7129C4976D28A3C3C
+:109F9000AEC7F5FD1747FEA92AC4B3C31151ACE6FD
+:109FA0006DDE475981B66015C753C842EFA5C2D3CD
+:109FB000517B07EDCB1D5D2AD279DD9391C974EFFA
+:109FC000432AB9F00AD2CF68C6E6E5733D34B08EB5
+:109FD000D678D3F364CCFB55FDDF17B9E9FC8D3996
+:109FE0005FE6210D6F4F6978F957E7CB3CA5E1EFAC
+:109FF000692D3EA3C7B3AE4821EF2FB0D53D90C722
+:10A00000E38C43C665CED3F37D34FCB00363E95ED5
+:10A010008E2D3DF6B85B40786CB47FD9F09F620816
+:10A02000ED2FBD9DD7242FF4FC1DBDEC3925B07854
+:10A03000D23E8247EAA238A9E79444EFCDFC775B91
+:10A040005EFFFE22F19FBE2EA9D6595F17F3FBFBE0
+:10A05000B47539BAE84F413CEFB2C5CD2CF38958FD
+:10A06000BE31FE6ECE0348B5CFFD9AD6FFC9C8D427
+:10A070005C94CB0D8ED8E8E1F0BD8E9F17BFF8A39E
+:10A080000BF96CCB29E70CABF57849D34FA04F37D0
+:10A0900025EF83FAE63FDF8ABD7A24E33EA8AE4F80
+:10A0A000F57D504FA5791FCD7A1F740BB3968FA9FC
+:10A0B000F64107ED7F6AFAF6B3BC14FB9FE5439FB8
+:10A0C000673F90C78695F771B5839F9735BFEFD1EE
+:10A0D000F8EE646473D15DC057372C7252965262A9
+:10A0E0009193F8B071919BE2B28D153CDEDB78A7BD
+:10A0F000A0EDD719E3B04F83BC5809E33FABE99D0E
+:10A1000037597812DAA3B32A05C33E79B8DA6D2835
+:10A11000CF5FFA93A7F1DE8467A6D8158A3F435F25
+:10A1200031B40BAA799E2253FA6EC338B71E7FD67C
+:10A13000D7FF99EA37E91EB418D8F9A343187F1658
+:10A1400089BF9E796122BF974E18D80F57C04ED84D
+:10A1500072C128CAF778B9FC5B14E7DD8271719887
+:10A16000E9962FFE3883E80894720CF9757C561C2A
+:10A17000E563E3B80939489707C67FE6C3B8E8EB5B
+:10A18000B79CCCC675EA5DD7447907E67537C799A1
+:10A19000CDF1E5B38D2757E71BE9E169533C5997AA
+:10A1A0005766F991144FAECF1F463C59975BBA9C46
+:10A1B000D0E5D7CBE5EDAFEE867FBE1C71124CAF7C
+:10A1C00068F3EEE74B8D2E5FD6F9F00B27D9230706
+:10A1D000C63F4CF9567ABDD6BC4CA2AF6F95C7EDC1
+:10A1E000B43F8B790A6503EB323FB2BCBF8CDD7E96
+:10A1F0007BD9F506FAE8975367946343CB29573E1A
+:10A20000B7C352E56BF6A4D43FA3C94EF5FCD51EE7
+:10A2100077957C793DD4B0E80F0AB683E70E6A3FA4
+:10A22000DE11895BE827333C9E53228B4F4C7EAF77
+:10A23000F0F7FD7AC041DF6375CAFAF5016E4FB7DA
+:10A24000107FC69CB8EE52B6DA8A749097ADB6E528
+:10A2500043BBDF06D40DF949F2B4C5CEF723451B45
+:10A260008B3C688197C7F235BCB07010FB6BAB3587
+:10A270009EE7D29FBFC997B4F3189382685FB7BCBB
+:10A28000511144FE39E89B44F676AA75DBA6F31318
+:10A29000CAAFD103FEC4566DBD814555DCC76DB351
+:10A2A0008783C9F1C6ADF99CAED2A73ED48376733D
+:10A2B0008B6CA33CC11699E75FB77AA5197BB4767E
+:10A2C00001433B493F4745F765485E637EF5636858
+:10A2D000EF54A59EE763F9DC3FB4B3C41DD5C2803B
+:10A2E0005EB11FAF75D1FD0F4C95797E53C8904F6D
+:10A2F0006DD7F44B9D295F4394BF9CDF569C1DE9AD
+:10A30000C6F534FB6D8702EA63F83E2AC59C481FF8
+:10A31000519735DF1FD6D6B5459BAFF95E55D17441
+:10A32000EF8368BAF72156D7F4CB5EA4B7F54EB9E0
+:10A330002540F73CD0BD0F51BC72099EFF70F37CE5
+:10A3400016F0FF26F3F306A15E94AF2CE8A2785432
+:10A3500047A1AA164259F4D976AF87FE5AD43A15C6
+:10A360008FAE74786D9DB8CF979317790DE731CD87
+:10A370002791DEE9B82C8DF4107C777339C26461C3
+:10A3800012F98374690AFAE078BECC1E74503CABB3
+:10A3900025C27A9DA3F8F97FA4F75A9638525D82B8
+:10A3A000F6B6AB12F17424343123622127F4A77975
+:10A3B000FFFFD5EFBD544CF9AA62E4A37CDAF76F36
+:10A3C000DC8AFBFA6BF68B21DC47F8CEF75F1EC305
+:10A3D000CF1B19F799EFF6D4F4A23E8B7A1D54AF38
+:10A3E000DB37A903F1D422F83AD0DF6D79E3FA9F85
+:10A3F000231E5B9A799CDB8CE783BEEFD3FD1A2783
+:10A400006139B1BEF97E0DD6713D5F27A78BF62D60
+:10A4100061BEF6822ABE8E141F3CE6A37BA04E1EB0
+:10A4200039E045F8BEC2BC65EC37F5BC0B65D257C8
+:10A430001AFD3029BC09E7F503D1D7D11EC07BD264
+:10A4400060BD11EE47ECE4EFDFED49A7758D027CAE
+:10A45000B8AEA2AF5E4597ECC3FD22AD73546AA2BD
+:10A4600079B198C4F6E2FB473EF9F18548076A16D0
+:10A47000ED6A89454D84970F012FEB2DF002F433DF
+:10A48000A600FDE5476EA07E3A1C2E192D9B16DF17
+:10A49000243AAF3CDCFB452A0A847E7F4BBB5FA499
+:10A4A00002FB1D545FF3B3D0DFC6EFB532FB38CEED
+:10A4B00006F09E2A7F452D30DACFC3C85F510B2CA2
+:10A4C000FCBBAFB0AE97170C49CFC6756D71FDDF01
+:10A4D000E96867A9627AC85D0C655C27C43FAE1362
+:10A4E000AE9716B72115A4201DC88902A4831BD2DC
+:10A4F00043489F67921B12E3EB6E97809EC1AE7339
+:10A50000CA91A37476518BF7E8F2C4CC672D2EA3C1
+:10A51000BC6AD1EFE53B363C7905F4B202F16096B6
+:10A520005BC3A593EF0FA693EF0F45276979E12849
+:10A530007E473C154CA078C5CD583E7244DCE718E8
+:10A5400089E3F1B8595F1E937727E565E9F06CC69A
+:10A55000CD6ED2CB3C6F4A6A600CF3E0FC652141C2
+:10A560002E1F161D6DFE9AE9E88EA1E48397F5D0A3
+:10A57000798D557A7ECEBEA1F373BEAAFE81F5BC5D
+:10A580000FE169F17D9FE87383DD25F37BD4CE6E07
+:10A590005D1F2C10CCF70B3D988CB7C1EB1AD987F7
+:10A5A000EBA8164CA27B8CD8944564377567ABC773
+:10A5B000305F8C4921835C1CC43F9ADCFEC1390AA0
+:10A5C000E5ABFEA5599373CD4E19EDF1C70337FCEA
+:10A5D0000EEBDFCE9430C6436B6C6B094F1FC2FC91
+:10A5E000768748AE96E1BE4F94A585343DFA1F08A4
+:10A5F000CF0CA559C882F781058A8DAE2155B63397
+:10A600005BF9F0F1F0DC603C3C37141E400EFEA715
+:10A6100046CF37223DEBE7ED53C9C137B4FECF42F9
+:10A620000EBE91CC5F5F03FDBE3FB47EFBDAE5CD8D
+:10A63000A7389E59DE78357EFE6E8885305E3EDC1A
+:10A640007C36B03715E4AFDA7417D14FCB8302E50F
+:10A650004B811D1EA1B2CF45C2E6A0CFC1F37FF74B
+:10A66000F1EF621DC7B3194F42213F9FB5AAEBFA24
+:10A67000B064C8938AF1F39AEA09B954C4FCFE6A3B
+:10A68000A267BF66CFE879FDE99AFCEFD7F3336D97
+:10A69000349EBF88CB773FD83B681731A997A11F5D
+:10A6A000FF83029EBF0FFC40F40DA384911F32A6CE
+:10A6B00048A63C2DCE2FD912B77732034C205D83AC
+:10A6C0007962F0FE13B027F07E824CD5D8EE076990
+:10A6D000DF15506FF52EF23609740E3EDCFD33287F
+:10A6E0006761BE17F08D7F86B17E364B2A5BF8E737
+:10A6F000B13A5686798B15855ABCCDC182A41F35D7
+:10A700003F5DBF2F503C73DED7D4C261F8E9171705
+:10A71000EA79C2467DDCE56696F1B523855C1FD5F6
+:10A72000F7D6D6A15DBDD6C7C8AE5A8BBA13CB99A2
+:10A730000EBAD726D45DE9B2BAAF2253B519EEE707
+:10A74000F5CF4833DC7B9B1DCE3294731BF20DF5A5
+:10A75000F322230DDF0B969D6BF85ED434C1501E9F
+:10A7600011BDC050BF04109C5C1EB5E93243FDD141
+:10A770001D5719CAE7ECF896A1FED8F862C3F7F3A3
+:10A780007E759DE1FBB8AEB586F2F9FB6F36D46FEE
+:10A7900061D6F777766878057E2739D6ECAD6BA061
+:10A7A000DFD1901D8638FF755ABDEECC4965180F74
+:10A7B00069395E5146FE70FA0543FAC366B9984A94
+:10A7C0001E9BDF6F2EE4F2F383C7DE9EB412E91CFA
+:10A7D000853CC8A50FBCAF6CC0396D2EE77909FA6E
+:10A7E000EF6298EFE5EFDFA794549ACF822C07B37E
+:10A7F0003A1F705DA162B9BFD02A845CB857940A31
+:10A800006F478689B7EDDA3CBE2ADE8E09C638105E
+:10A81000EA93072DE07A42E32BD057BF453E047DF3
+:10A820005599461E06BFC7E16CF5890E07E8937F70
+:10A830002FCC1E9C1FFE41C3F3D7DCAD60FD6B78AF
+:10A840007D5BA80CD725D5BED21385E67DA5AA656C
+:10A8500028E716F8D284E4FB9AF76BF5F478764B88
+:10A86000FA67B4AFD4E208950D675F697F21E3F71B
+:10A87000E0E2FA6627ADAB5D0DCA96FE9DD98E610A
+:10A880004FE03D1831AF4479C366FF2EAAC96DDD94
+:10A890009F930ED692BFDFE21D49791F2DEA5AD24F
+:10A8A000971D29FC5CD097BDB83ED37C371AFCB904
+:10A8B0008178804AE3415BB29B5A92FC7F6CA7DEB1
+:10A8C000CDEFD5FE1AFCE08F0ACFC2FF5718F783F1
+:10A8D0004F328EA793AA8DEC84936027A0FC6D93D2
+:10A8E00018ED7BC72A05C5CA2FEE58AFD987EB39BB
+:10A8F000DECCFBDD663BE38AD0F584B736A0275774
+:10A9000025CE9FDBBF6D767EFFA6EC0F0751DFF6ED
+:10A91000653BD86E80F660368FCFE978F9B2F228C1
+:10A92000A76890FF93533484FF738958DE85F7B688
+:10A930009E38C5E3220A1E450CE03DE47CFDD63E70
+:10A940003127B606F55489D484F9EB225332102FFF
+:10A950006B0E8B2C2EA01C33E6E7DB59D35D188FD2
+:10A960006301FE3EC65CCD6827654C31EAB14CD52B
+:10A97000A8C7FC33B24C7ACDA8C7721B8C7A2C2F97
+:10A9800062D46305CB2698F49A518F8D88D699F4BA
+:10A990009A518F8DDA749549AF19F5D8393B8C7A75
+:10A9A0006C6CDCA8C7CEFBD55A935E33EAB1F3F7E3
+:10A9B000AF377CAF48B41BBE4F3C7CBBA15CD573AA
+:10A9C000AFA1FEE4A3BB0DDFA7F6FEC6F01D10FD90
+:10A9D0001C9E67C07B6871112F7CF721E377A63A34
+:10A9E000301F7F059ECF8475BCA8EF61437FAC8389
+:10A9F0009F5B88C17FB85EEFB008DD030072EC504A
+:10AA000001B45B1D17420986FAE9C1B771DF6679A7
+:10AA100050243F6E0D065B911EEEF7C5911EAEDD14
+:10AA2000613CFFB03C6E2CC7807E148C2B00FD2057
+:10AA30007DAD30FD6E04D883446F2B14A909ED4A17
+:10AA4000337DBDA3D3574C7D0ECF73E8F3D5E767B5
+:10AA5000D7CF9F6AF4A76AF4C7C44708EE1505224A
+:10AA6000FDFE8E3E5F15FEE3DFDF77E03C3ED92F33
+:10AA7000303FC0710D8B1D2AB098CFEAFDDB1DC899
+:10AA80009FE67999E761B653DB8A8CFB489788DEAD
+:10AA900010F1DD0B22E9239A02F2D903FCBCDEDAC5
+:10AAA00027443A17837C88FE82186B20BCAC01BC1B
+:10AAB000E0BDE1BADD7A426B77E2A7229D6F3E13DB
+:10AAC0003F2A1A3E9C41233FBA9534133D19F1EBBE
+:10AAD0002933F2E78AD72E75A0FC3A04F816A6307F
+:10AAE000E60B19F97585B892F6F9743C2BF01F8EB8
+:10AAF0002B81A98BF35E0DF34E2883F1BBEC91ED16
+:10AB00001B0A2CE8E64CF87DB0C8B8DFAEEFCFD515
+:10AB100002761C1679A53AFEBAB3D53FA27C4CE565
+:10AB20000F1F283A6B7FF840D1D7EB0F3F5334A467
+:10AB30003FDC370BFD29274B0FB55BC4FD242627CF
+:10AB4000305E6B6FE271BF81F8DDD71EE7790BE1F4
+:10AB50009464AE27DD921EE7091D8DA07D92716E73
+:10AB600008F3A2861BE7F870B01EFB70283D06F6BE
+:10AB7000C5313C4FA866E4D7DB9099A45019DDEFAE
+:10AB80008C20F03CA4FF46F806E5EB966669F9C711
+:10AB9000CA90F9C75768FBBB1706D57F221CD0DFC8
+:10ABA00069ECAFFF3EB6CA6CEA27FD0CFDC4EAB8FB
+:10ABB000BD16B3F93A5AB8BD46FB4C5F431CC35FA0
+:10ABC0008C712D2FC77F8B83C76DCF36CE565C3CE3
+:10ABD00028BE545C3C447CE91FAFE6F273AB21B065
+:10ABE0000E2A52D3B77E0E532F6FCE34FACB1B26CC
+:10ABF00070B8CE2DE6EB1ED1CEE3D668653DEF12E0
+:10AC0000F316DD13A03C939F53D2CFB5EAFDD414C5
+:10AC1000FBA8FEA7C1BA1AC4C786127EFFCE864C17
+:10AC2000E33D3C278A6A6B705E53B4FE6B8A193F22
+:10AC30003731523BB7698A177CAED5FFBCA88E9ED0
+:10AC4000788E16FD1287285AE2735AB14DBBEF86F3
+:10AC5000D173BA7E7EEE4E7EBECE7CEF02F0C98B03
+:10AC6000F8FB506FDE66277F0FF4119D9F5B5AC083
+:10AC7000CF219AEF538894C98750BC7EC2CA2DEF6A
+:10AC8000E51994E770EC26CABF7B662A9385BC332E
+:10AC9000E73D7CBBB85F5F85BEE439BAC6E261E4DC
+:10ACA0006B2DD1CED1F5A6713DD697E78AEFB6F0E0
+:10ACB000776FD5E8F236CDAFC5FD69DC27C7FBBDA0
+:10ACC000ADF6CB6F2DE6FBC3C33D577DBB231241D1
+:10ACD000BE359FAB4E759EBAD7D1DB968BF08E6595
+:10ACE00021B4DF7317C8DDB9502FAD5EA1F38F1B00
+:10ACF0004A58FA14FC5E610BE1B98ECCB9F2063BFE
+:10AD000094334B599600E5DED81C1AFFB606268B05
+:10AD100000D77DC5FC3E8485B77C44E36557C3D42A
+:10AD2000143A773E1DFDB35803A37B0BCDF3BC5BF8
+:10AD3000A35F571BBF2727A3D43A0FFFEE62DDBFE7
+:10AD40000EDF85F45B5BCAF6F1F3B3FC9C025E4B4D
+:10AD50004FF99BA134DA17BC12D68DEF9FF7D0FACA
+:10AD6000DD149CF6536CA7F39B43CB53309F27BF56
+:10AD7000AFF8ECCE93A72DB08637A1ADF735D9E16A
+:10AD8000FB918ED2CA3AF8EF977E71FAB43849FB3C
+:10AD9000694705DB4722A8FFDCA0FF047C2A329D1F
+:10ADA000A3652E81CEC3BA9426A22BF794901F7F61
+:10ADB000178D2DB131BCC7659AD65E6D6002FE9EBF
+:10ADC00004E502929C36FDBE841A6A6D86F697E011
+:10ADD000BE5908F3BE43CBB0BF7A6F9A8CF14D7762
+:10ADE00069532DAED7E30B791FB7A7382FA19FB3B7
+:10ADF0001FB87F6ACDB3867B051CCB9F35DC2BC08B
+:10AE0000963FFB55EE1578AD78F9B3FF13F70AE8D6
+:10AE1000F20DD4901DEDFAA322BF47EFC347AFB6A2
+:10AE2000E33A6CA8655D88F7D8678067D7009EED28
+:10AE300075E1C777A25DB2363DC47F4F24F61D840D
+:10AE4000F3350F93B1BD9E6F28B032D2D7731B0478
+:10AE5000B21F98D4B71ACBF31FF1C8E83F7CF8E8CB
+:10AE60004B4531A0CF576F3DE9C3FCD4D7A53E1F5A
+:10AE7000C2F5EE2DCFFBF0FEAE576F11290F85CE38
+:10AE80007D27E5890923387D2D1A113E85F4B5709B
+:10AE9000DD3F2725DB672C9A4DFA7E791C204EB6C4
+:10AEA0007B7FE531FCAEE8AA2EBFA1ACEBF9554E95
+:10AEB000EB73F35347703E5C7E7FA7A340C1F12341
+:10AEC0006923A0FEBBDA39A077F7F9C88ED7E1591C
+:10AED0007C7F8503EDE1D71F71B204C5057BECCC07
+:10AEE000CBF507E65D44F8D083E03CF4970207F227
+:10AEF000D95281F53989B9D921C4F7DF34FFCF3C64
+:10AF00008FA5AFCA0E5CDFA5B5AC0FCF9D2DBE518E
+:10AF1000D8F003A8BF38E225BFDF3C4FB3BEB91657
+:10AF2000EFB311ACEE816B3AF467E86709F483F68E
+:10AF3000E7D20EE3F713876F38B413C6DDB7DF41EE
+:10AF4000F6E2B56788F78F1FA1E9A5496CF2E951D0
+:10AF5000A4FF32C629A9ED0E5D1FBDBB8E5192CA5A
+:10AF60007FE1EFFBC2F3FD75323D4F152BB41E2B75
+:10AF7000F6771FA2DF16967A26A1BC9BF944A3E7B9
+:10AF80005B6C20AF685267CB819D5455CF574D50B5
+:10AF90007C6F8A76FFCBB5DAF98FAAA3E67CD5EE73
+:10AFA000C7FF8C761BCCFF6CEEED5930CC7B7B4E13
+:10AFB0001C9EE6413A993D42F37F26035EC4AF8E64
+:10AFC0009754ED56A5F8DD169D9F4E697A66C99E89
+:10AFD000D91BF261FC9647DF29C6F8718C71FAAE75
+:10AFE000FA29FFFD9F2A6F0ED19B0BE9330F9B9827
+:10AFF000EE7988B11759127D5FFB8887E82408F63F
+:10B0000090730ABEE1F45A85F776227DBFC0DBBBA0
+:10B0100034FF36F2C8ADBCFE9F1DB233487C19B474
+:10B02000D13311B44DB1B867CB7CBF5887B1FC8127
+:10B03000BDB718E5CAB5263FF403C13A3FAD71C4A8
+:10B0400048C2C712459D8E79004B5978038FDFF2B5
+:10B050007B7BDE953A0EFD10F97D8FC06280A7558F
+:10B060007F7CE0DF518E5DF7BB3BD3518EBD2775F2
+:10B07000E4E0782BF7B6A5A31E78578AA563FBF703
+:10B08000E25C9E0DD29723044D0EABE902C8E4D5D5
+:10B09000446AF0FF257D1B6E8671FE1BF08C7CBF21
+:10B0A0007ADFA7543EA4BAFA5810FBED9D8E702C9F
+:10B0B0005FE46D6A0EA17F69E4CFEB7E79678E4213
+:10B0C000791EB1020D7F05D86EF51E3BE5F9A21F72
+:10B0D0008FC3AC617D343F73FB355D6F3A505ECBFF
+:10B0E00036D65778E1E0EF60213990DFD6ECDBF21D
+:10B0F00091988ECFF75EC1DF835A63B24F9769F2A2
+:10B10000DB4CFF5D26BA07FC507C210670F19F6383
+:10B11000E272BCE5D7778F7F03E07B7FCF53E9F8FE
+:10B120007B133AFDEBF73C9FE86A5CE818E21EA14E
+:10B130000F343EE9D70F9A7E52F60360B9507C84F3
+:10B140003F57DA13E917C27C5776DA4348F32B1FCF
+:10B1500010552FDA552F3BC91E59F9C049A2DB956E
+:10B1600082DA27909E63E928C7F5F55AF1C0DFA679
+:10B17000A39C5E9127B299C08AD7FDFE135E1FE89B
+:10B18000DC0DF5573CF8C6F41F6219E489CB62BDAB
+:10B19000A675753B7ABD16EBD5F5C6748CCFB7FC9A
+:10B1A000FA1FB41EEFFD4560B92583DB2FEBFC1BB6
+:10B1B000C5C1DE8785F167727CA1BE59D3252E7289
+:10B1C0006458AD5F62D6C395F49DF2C2CFB48E1DB4
+:10B1D0002318D78F7F7CE0DF1E063896BDE20CCDAA
+:10B1E000C471FFED86740674F08ED4C4E9FE676DF9
+:10B1F00039A8BF97D96339323DF9FB65BBBE47F427
+:10B2000078ED5FBF97A3ED37E4D9481EC4F2709E76
+:10B210004B7F3A8FE6790D8B103D2EFB19BF67F1FE
+:10B2200013F0B3ADFC84A90AE71B27BB7EFCCD015C
+:10B23000949B78670BC0E160FCBEAEE778FEBB93E1
+:10B240005D95916CE77A146ECFC558FC35B43BD749
+:10B25000805A46B9F6FF003503B31E008000000097
+:10B260001F8B080000000000000BE5BD0B7C54C5DF
+:10B27000F5383E77EFBE425E4B5E8457B8791224B4
+:10B28000C485249040D485400C0AB8404494884B2F
+:10B29000C010202101AD60A5CD860002C53628551D
+:10B2A00014B40B8245451B31086AC08D2886EA1705
+:10B2B000438D165BA18B2008045810EAFA2DCAEFC3
+:10B2C0009C33F766EFDD243C5ABF9F4FFF9F7FFA08
+:10B2D000A9C3B93377EECC79CF9999B3E2814BF911
+:10B2E000BF8C62ECE1787DA5C9C25805D33B3D66B1
+:10B2F000867FC215814A493F189FC35F0263790761
+:10B300004675F3A4316662178CF767327611EA9FAF
+:10B31000B36ADE6357E2193BB1D1D445B819CA18F4
+:10B32000565A07EDAFE0DF6DFEB25482CEA3A9F905
+:10B330005F18F43F97BE04FD6C3991BF0EFA65B1FA
+:10B34000220B8FE5F073303E4B71486578367CAF49
+:10B35000E5A8B107D43BA3742C19C7DBFC0DC1CC05
+:10B360001A2D617BA5FF8A9D26E656C603FFAFD83E
+:10B37000F48D91613F3AE6ED35AC7D3D6395E9880A
+:10B38000870A162EAD84F284D19BFF2E7E07BEBBAA
+:10B3900019BE53B206DAA7AAFAAB3FF937968EED7B
+:10B3A0008DFEE7F1F8DFC58C65412116853B42181B
+:10B3B0009B8938CC693FFF855F553FFE81AABF0C52
+:10B3C0002934EA7830FC63081B7245F4BFCFD603FA
+:10B3D00092BAB77FFFFB2AE7E31F18F06D27E1B1B0
+:10B3E000CCE07A09F154F6A5C9EA043C96BD76C9C9
+:10B3F000A88B422A326F7257C64E6FDDF3C57D307F
+:10B400009FD37586A831F4555B9810E3C77BE9B6E6
+:10B410006FF2D7417B03E03D08E839B7FE7BA30E0E
+:10B42000DAC7E631AF09C67F3ACACED800C49BE17D
+:10B430006B8F0A6F79F0DC1342E3E8A98BC5D2DD8C
+:10B44000934139378A59DDF0FEDC16D12A21BE98A6
+:10B45000779925A4FDFB15754703E8A2AD67CC6B72
+:10B46000B4E377EB7F735E0C53E35DFFB5478577FD
+:10B4700005CF81789D8A78EDEFC7EB2596160E9F54
+:10B4800061A75E99D3C791D61EBF0A5ECF563164BD
+:10B4900072FFF33E12E159DA091FEA06750D72C90F
+:10B4A000D8174C85C7D9AF9E21FEFD67779189C01B
+:10B4B000377337FDB00CF90AD0EA3501FFCE759D20
+:10B4C0002778A9CDEC650437160AE91DCD5B8BCF33
+:10B4D000C0FA78446AB49FFE86C5CC190AFD7A7713
+:10B4E00089AE8D30B47392372C02E6B734883D6054
+:10B4F00087F29C4586BB2A307B601A8CF39C33DD37
+:10B50000E2C4F782D8E43AA0CF39BB37AC6B887F6E
+:10B51000DE471AC43009DA7B5CACA02EA43D1F3292
+:10B520005643DFF7B0CEEAAB491E4689975FF7C0B6
+:10B53000F72E38F5CC04DFF3547FFFBA07CA637ADD
+:10B54000B305F134A3FA9E30A683EF3724DE351914
+:10B55000DA3DB80FF047D3B319BB037EA7F3A9B305
+:10B560006F99F3E95C989F189AB9F75D78BF04105A
+:10B570002B02BFCE58A5C5CF6C660F77C7A3DC1AC8
+:10B58000FC7C42FF7519DDF0DE4C4748E54AF86E59
+:10B59000E97A6DFDEC86D3C45FB303F8CB81FCD5AB
+:10B5A000BD3D7FBDA2C8ED403610F96B9418A24393
+:10B5B0007E3ED724BA4CF0CE852506B60CE00B5B58
+:10B5C0000517837E2E3440238477729839A3896FC0
+:10B5D000153E57F0D68AFCD7B73D3EDBEAB71F1AB7
+:10B5E000FC1834297BEBEFE9EBA06C7DEBCB947777
+:10B5F00011DEF1D7B8BFB3F6EDF376FF3095C6B5DF
+:10B60000DBC4705CE7767F14F718C2EF98ACC8B75C
+:10B61000E7169B6C0CF5DDEE505732D6F7067E0030
+:10B62000BAD7ECFA3E1DF53D634B888E9F4B462AF8
+:10B630002F34FCEBB080F3683049388F8ADD80040A
+:10B6400078BFE29D2017C3F7777D3FD811F2F3CD85
+:10B6500067AE9139883F43D9E46DC8BF5D990DE766
+:10B6600053F16ECE8BD5F0FDF2FA46E374A8CF7B92
+:10B67000EFC774D447E7B6351A515F9D35785E60E1
+:10B6800056E4DFFB6B0D80E7B3A1D0590FC61EDD7A
+:10B69000F0BCDD19D2115E381ECE011E705E80979F
+:10B6A00052575AE7F8F8FEBF161FE7A7E2F7CB1A82
+:10B6B0008630315E8D17C1C69F87BACC02CD9F3FC1
+:10B6C000DFFD7D3A0BB9F67CA3E38D24EFFF7F9974
+:10B6D0006F46FC7F2B7D39BFBF2B4934BE40BE6F08
+:10B6E000CFD73B1E21F8F5502B8DF73AE57DE27F51
+:10B6F000EDFCFF6FE83DEFBF76BED7A2F73E99DEC7
+:10B70000A11613EAAD5D3FC6B11B9877EDFF47E781
+:10B71000DDE6FFE8ACE64C18DFDF98EBEEE10279FE
+:10B72000251DFA23BBE2B5EB8E71B25F51C3BE1E7D
+:10B73000390DBEEB047F02FDFD9A90AFF52D003769
+:10B74000839F80FE0543E704F0D05C38D0B512ED4E
+:10B75000B6BE925900367C319DE0C9C53FE833A1A1
+:10B76000FDDDE0E761FBFDD59E19D550BFBFAB4EB7
+:10B77000AA01F82EDBC4E47A802D3D440BAE636A47
+:10B780006C19664935BEBBB2B5EB91FB02D615F715
+:10B790004CD6D64F621BA3F5D0DFA4520373C194DD
+:10B7A000EE0E68BF2EDE42F8BA87552EB584DC381F
+:10B7B0009E4ECB78AA61839A24C48B4DB46E66EDFD
+:10B7C000F1C6106F8897D80CB6D28A5FF1E85B009B
+:10B7D00036C9FE15FC913CDE1D657E09F16462F3FD
+:10B7E000D923D0DF25495F89ED4D0CD68D7CDCB4A3
+:10B7F000DE0CC41B93D79F26990477D91E628867F5
+:10B800007CDE2756F33ECD3B10CF378ED7C5C94FD0
+:10B81000235E0B43AD2EE40BDB8BD17AF85E0DE09B
+:10B820005910FCF854F0148877F43969FD27E35B6C
+:10B8300029D398772AFA9D612CCCBA12FA0F33F7E4
+:10B84000627A3E0FAFA93B161686EB357104AB5BEF
+:10B8500009EB3596AD6F6D9B5702D5BB1F83F76A19
+:10B86000E6C1FB88D75E4CB213FF1759707D2330B9
+:10B8700007BB12ECF73F3FCD06FF339E4AE2DB4F9A
+:10B8800037717FF352EE9BCB0682283198B3733029
+:10B89000FAB9F29FD35384EF894C67C5F52FB3D91A
+:10B8A00024CB60EC97D1BA263C5BA759FF76B575DF
+:10B8B000D1E02DB220420347DB7B68DA779B9CA066
+:10B8C000A9EFEEB84953DFB3749006EE5D3954D357
+:10B8D000BECFC2111A38DE7987A67DE2F2091A3886
+:10B8E000B9F63E4DFBBE6B8B35F5FD5CB335F5FD12
+:10B8F000B7CCD7C003EA7EA9697FF3CEC59AFA8197
+:10B90000EE959AFA8CA627357056F3739AF6430E85
+:10B910006ED4D4E7785ED1D40FFB769B06BEC5FB10
+:10B920008EA6FD6DBEF735F070F6B1A67D9EF9339B
+:10B930000D3CCAF2774DFBDB638F06C43B2CCE87F0
+:10B9400032518D013F819C8D964E6BDA83C75C84AA
+:10B950007C6390F9E1CED4EF34F563ADFFD2F467A8
+:10B960006495400464AB5A2ABBB03A2A43583395D5
+:10B97000BF1EE0B027A05CBCE05C864CB53FE7FB97
+:10B9800038B4239FE63EE444BEBB14CB2CE24018FF
+:10B990000FF3EA91AF75C1977B395471A3309FC8FB
+:10B9A000DC19C0873E814A8B2F98B923810F7D41D6
+:10B9B0005446F822E979A4AF2B9551BE9EF43CDAA7
+:10B9C000D79DCA185F2295DD7CF154C6FAFA53D987
+:10B9D000DDD78FCA1EBE0C7AAFA76F2095BD7CC382
+:10B9E000E8796F5F0E9571BE3C7ADEC7379C4AC915
+:10B9F000772795F1BED15426F82652BB44DF782A2A
+:10BA0000937C53E879B2EF5E2A537CD3A9ECEB9B8D
+:10BA10004665AA6F0E95FD7CB3A8BCC9F710BDD7CB
+:10BA2000DF378FCA34DF63F47C80EF512AD37D3552
+:10BA300054DEECABA6D2EAFB0DB51BE85B41E5207A
+:10BA4000DF53F43CC3B79ACA4CDF3A7A9EE57B9643
+:10BA5000CAC1BE17A91CE2DB4065B6EF552A737C4C
+:10BA60002F5339D4F726BD37CCF70695B9BE77E901
+:10BA7000F92DBEB7A9BCD5B7879EDFE66BA4D2E689
+:10BA8000FB989E0FF7EDA37284EF337A9EE73B405D
+:10BA9000E548DFDFE9F928DF9754E6FB8E5279BBF2
+:10BAA000EF089505BED3548EF69DA4F20EDF77F411
+:10BAB000DE9DBEF3548EF1FD8B9E8FF5FD40655BE0
+:10BAC0003C21D710A017DBF49FEE0AC67942223A38
+:10BAD0008CB7B5BD2FEBE3D5C12F308C7B8CAB146D
+:10BAE000689DFE4CF0D90F484FE69824849762D3A6
+:10BAF000EEFC3B9618C6EEC77F488C35E69868FD8D
+:10BB0000BEFF57FCBD65C38F7EF510DAC779268668
+:10BB1000F63150FF2ADFFD347B4F34FA61CB0679D2
+:10BB2000CA30FEF244BCA708CB860481ECC59B72E8
+:10BB3000F94E828ECA3503B8FD2E9A971C4E71AA13
+:10BB4000A8EB9BD7FFA2DD8FF6B77F2189F7C34211
+:10BB5000BC71642FAEB39FEB6DB7D4FCEB3F605C60
+:10BB6000C756A36741B702ACE7F6DEF955A86B33B9
+:10BB70004CC939A2F28F18E7712E36596AA210CF3C
+:10BB8000BFFE13B65FC898DD04E51F121C9F254059
+:10BB90003FDF07C5B9C038C25FE59009A13F6BFF21
+:10BBA000FFF83FEEFF34EAB5CEFAFF87CC476312C9
+:10BBB000EDE7701C4C6F4B473A8C58DC5D8C82F77C
+:10BBC000A7AD122CC847D3970CCC47FE18C46C14F1
+:10BBD00027BD3F923D60EFC02FEB96A893FD0BC9A8
+:10BBE000780F8CE70CB81CE84F144B8CF8B2B841B6
+:10BBF0007039290E6D0B1B0BF6BB54E6DBE2E5D565
+:10BC0000C605D0AEBC3B8F9731178F9799E17F283F
+:10BC100047736A37ECA570A37899E26397D0EF0574
+:10BC2000D699B3A57D3C7601C699771A2D6837CA97
+:10BC3000EB02E2B90171B3C0789925518EC75A99C8
+:10BC400095C7B9434AFE8ADF63619218756DBC28B7
+:10BC5000F1598949DD108FA3C4B4705CC75C684A90
+:10BC60000E67584A52376CE7005A344329E81D439F
+:10BC7000F039E0D38974F55607BB36C2B88E803DE3
+:10BC8000913270408E21468C47FEAD375B2910D52E
+:10BC9000C80FABD824925FEF59FCAF6518C79E154B
+:10BCA000AFA775C0348CB9E3F8DEEEEA720AD42F80
+:10BCB000E1DDFB9A407157279B1F8B71DDC07D141E
+:10BCC000FBD2E871D948A7E55D079990564EDB177E
+:10BCD00049312AFA2CA921BC16C74672FAEC3490D5
+:10BCE0005F0BF4A946FACC72198EA9F17C895D36F6
+:10BCF000E27E4CF1F2F344AFD97E7A69DA95D73619
+:10BD0000125D814E9AE71595279438FAB1ABD12B85
+:10BD10003F805E183FBF072B1745927E285AEC4E96
+:10BD2000AE54F169E0BE44D28CA1E1769087821EC8
+:10BD30009C1E4C6F8D417A7EB72A8BE81548A782EE
+:10BD40009FA6133DD8DF42D96618CFFD89EC810943
+:10BD5000F0FC0139FE7A7FCDE8028C974F4DE4EB81
+:10BD6000934F61FD6983F5E7812A33B3816AFEACA5
+:10BD7000CA42F0E755B104FFB54AA2F2CBAA542A51
+:10BD80008F1959699D4ABE80018C38BE192857D138
+:10BD9000582AEBC3876331EE5EF0D367593A52A954
+:10BDA0006F8E1FD51BD7178004157E261706932F7D
+:10BDB000ADC01E83253F16F5C70AC1BA19E96A1F2F
+:10BDC000A669CF5233FC30DA2F3DE727E08B8DC8D0
+:10BDD0007FF78E89D4B49FB4BCA7065E9428D1F8AF
+:10BDE000C617246A9EDF57D45F034FF3C17A1E3E05
+:10BDF000952415E89CD0FFC54F0CC4CF172B877432
+:10BE00005BC061E2BB40FC1F333A298EE0DC68B2C4
+:10BE1000A2FEFB3688F3F7B79F8BAE1A5AF73A2982
+:10BE2000EE72C96C91709DF2C874671CD63F120CFB
+:10BE30002EF940C497C8307EC05E3191FE9CBE563C
+:10BE4000604E94112FA3F5F2C32F9B689E33D68AC0
+:10BE5000CC91417C1287ED1F8E96A8BFFB13A53AAB
+:10BE6000E467EF66937523D44EF7C8EF0B83681F22
+:10BE7000A47CFE5F0FEB511E529AD371AD5514EFA7
+:10BE80008E463DD8BAC940FB5EE5E286921020D1CD
+:10BE90009C27DE0CCB9148FC08BFA70E446FC0F96D
+:10BEA000FBE7EBA2B8C8377DEC1B13419F9E2A71BC
+:10BEB000A5D33A79118FC7B7C70B233DE5D4854980
+:10BEC0009B71BED31D432C696A7BC8F7FDA61BACD2
+:10BED00031D634E4FECCEEA8078EAD321460DC051A
+:10BEE000F4FE38C4D3B1DA48DD4A5A546D23FE2A31
+:10BEF000D64B46F5778B5789366A0FFA7D3CDAEBDD
+:10BF0000D5A2830D41B896FA772E171CB8EF94C4CA
+:10BF1000B2BB21DF3E346F48379CC7D44EF619CFF1
+:10BF200082CC3854FB58B3778976177E2FD3A32F52
+:10BF30001CA01E3F8F03253996F79A8F747A23C869
+:10BF4000BA5242BD9A188EEBD4932D6037E01BB3E2
+:10BF50006A1AD32560BDB28776101D4AC7D5A5B829
+:10BF6000E1F901B3E313C4E3B7DDEB9E1E8671A2D2
+:10BF70008617E39C680717F2FDB5D9AFCCEAA3F6A4
+:10BF8000E7DBFB132C56978D853B4600BC38249687
+:10BF90008FF89DC2EAE4F8858BC627A1D2057C58AC
+:10BFA000CAF8FEDB749D75EA679988FE500BD2458E
+:10BFB000E9EFA881C7B9FE21CBB362877B24713F2B
+:10BFC0006BBA8ECB1DDB2D109F02C1BE4852D9CB60
+:10BFD0000AB68AEC656C4F91E1BEDDD9C408592FD1
+:10BFE00070FB3707ED1FEE0B5B04928FB22D269787
+:10BFF0000BF82B3589CBE76CE36B4F0FC2E6F1955D
+:10C0000046FCCEAC7A813D074D4F195C25CDB82F4B
+:10C0100065D9B02482DE33585DC8A7B27E3783422B
+:10C0200040BD3013FF09F5E56B04979BF8C54E76CC
+:10C030006806C64D70FD8F7A5EA547DAE9F700BD48
+:10C04000FE200BD8D7AFD5DA177B70A819C7397B7C
+:10C050000DF76BFDE311D915C05589C3B5771C8D5C
+:10C0600057A0B848E0F767E2F870BC303EB7F5C6B5
+:10C07000C75362E5725A562BB85C1D8C4FC16B7862
+:10C080002E93D03ECFD924B8901F4745CD23FCCE68
+:10C0900006FC46225E9DF6B07B002E014672517C66
+:10C0A00085E3BF623DC73FD0F92F6ABBFB4D94D7F4
+:10C0B0008878FD06ECA713F7032BBF27BAEF05FA24
+:10C0C000A2FCCE7AC365C48DC8D3AC362C04F97EED
+:10C0D000ED81BDB82CF866CD9B31B87E2D8A7027D6
+:10C0E000EB406F45B2E8270B6EF1F35FA0BD6E67C2
+:10C0F0009703F0E36476B243EDF0645ED58CFBDE2B
+:10C10000EDE827C7C51EC47F017E1EDC24DA82D27B
+:10C1100035EDE4F3084EC25BA9D34B7E4229CCB384
+:10C12000C6824F9DF9889707AD8CF4EE8D8E3770DF
+:10C130009C4C2C22FEC4B81EFA21FFEE7803FD8F22
+:10C14000494957F73F02F548A0FFF195C1A65B8C1E
+:10C150007EDF01BE2F7E51EFEE8DF27B312AC10AC8
+:10C160002DFC7A347A5037D4F38A1E2D91ED96D275
+:10C17000EF8368AF003EBEF6CD30A4BB42FF9968A6
+:10C1800027D2FC76E291E9D03F7CEF911D41D4FFAC
+:10C1900099B160A7A0CFA2E73F0A632AFDF7781FF5
+:10C1A000C7FC24D4278A5D1337C45980BF147D7916
+:10C1B000AD7557A7F30A099857A8765EC538AF0C36
+:10C1C0007F7FD3E5797DBD9CCFE7E82A3EBF19ED9F
+:10C1D000E6C5EDFE232F9AAC4EF20BDCD12887DFAB
+:10C1E000BE21B21AA22FF71B2E99819F0662FC6610
+:10C1F00015D9F593D14CC2B84EA7F67BB589FC8210
+:10C2000059DBF97EEB29617837DAF8FFC01DF62893
+:10C21000CAF53691A11DF28FA7CD6E3F9BA4B6DB68
+:10C22000D789378CB3A23D9B0BA843BE9FDBD08D33
+:10C23000E1399755C3599D48FBF01ED263C04214A3
+:10C240009F063F5C136F3031ABD98C74EA24FEFA41
+:10C25000CFE4F353E7133EBC29887FE5FB155DDC93
+:10C26000866EE8D7BC21905F53FEF0F0B0E10CBFC2
+:10C27000C3E3663B92B89D7A07F51CCC4BB0555290
+:10C280005C0C7C1ACBEF705CEB797C98BDCFEA102C
+:10C29000BF0853FC58C7E7214816563488C7E5CD78
+:10C2A00068D7427464D702F17042FE4EB9A823FFEA
+:10C2B000B7CCC8FDE073023FFFF1916C1F3F4AE22B
+:10C2C000EBCC4F92783CE11CFA81D0EFB95B4CAEDD
+:10C2D0006A01DD563DAD93F5B92617FA337A7388B6
+:10C2E0005B4C47F4EACFB6C933E06B2A6B36203D8E
+:10C2F000C765CFDB82F339DC8359C4AE546DC77D8B
+:10C300008429A41918DB6FF8EA438C473AA1AD08D9
+:10C310006B8529D9277A63FBF508C3FC0F07D57D08
+:10C32000887196C3F17A86FB02CE5D26B2FF861134
+:10C330009EDE14A7ECC258CD408CC7EC598A7CB461
+:10C34000373632D502ED1FD077B18A5CFF8C3C8F37
+:10C35000E32D15F8FECD124F16D2E766B6C472DC97
+:10C360004C5B0BF55722AFC63F7A765CE10318535E
+:10C37000D908F8C750C6192B9BF0A98101AF045FFB
+:10C38000DEF4C88435B9B869220D403A972578F5AE
+:10C39000B89FE215987723E0E1EE6CAFDE86F4B249
+:10C3A000B1BABB807FDDFB9880DF4111C0EFDEE3D7
+:10C3B0004E18857860A9120B87FABBF412C1BD0A2A
+:10C3C000588428EF1B601CEBE03081E8A0334B065B
+:10C3D0009CB7BD401884FBA2658BAF6F9C61C9D52B
+:10C3E00034CE329D8EAF671FE5EBD929CE23A3C88B
+:10C3F0004FCA6502F26145449D81D6D1202F38FE97
+:10C4000081D08D1A7F53F41E3EBE52185F0ECA456E
+:10C4100012F1F17D9502F99315C68EE31A3D9295BE
+:10C42000759745C2F673E05FC8D7731A7624E3F7B1
+:10C4300056099C0FE6287CB6552B97B9C9ECAA7C07
+:10C440009D93CCF93A2799F37572DBF7EAC8EECEE3
+:10C4500069F8E820AE2B3BEBBFDCC4DC84975D269B
+:10C460008A1F083A6F12D1051109749882FE24B808
+:10C4700088439223B89F2EF36709FA1F8958F2B8B0
+:10C48000880E9427DAC3D2DA178D88B4C0F347E058
+:10C49000F8D039A0D99B029FABE22AA246EF50DC2C
+:10C4A00053307A67E078845B83ACA88FA718EB6879
+:10C4B0005D1ED8CE50CBFD2CC372EE67D1BE1AC024
+:10C4C000A655DCCF9CD2CB3B80919EB3E40BF1AC64
+:10C4D000CD2F2EE19F86E7651ABFD88471048C7B2F
+:10C4E000ADE5FEA05EF65F8B5769FD85294B54FED6
+:10C4F0002275EB2DC7F11A160553DCC584FE84CADC
+:10C500000FF8876EBC13F5B033414FE72F0D2CD0D9
+:10C510009FB0331ECFE4CFF5B29F383AD9A0D97F70
+:10C52000738E60A9888722D44389A86AECCB319E98
+:10C53000778185D662DC6C94B888E27F45D5FC5C57
+:10C540005A60FCEF42E587CF637BACC7E70BBAFCD0
+:10C550001487FB9BB02CB50BB782BFD1E5F0250744
+:10C56000CA07282AC3508C03EEFF06614117CE8408
+:10C570006CFCBEFB79ECDF69345B506F3D131C46ED
+:10C58000FD2C5C28507C788985CBDBA1AF4237A29B
+:10C590009E52E2BDCB8667ACC5734B359B1B27987B
+:10C5A0007BA37A60746E8939F7FEC506F329BC0C4B
+:10C5B0007243F047136CE1C0E71F7AA79A014FCF8F
+:10C5C00026374DD0839C9CFBBDF705845F4D3EC054
+:10C5D000E127BC7141086FFE9CC3D54A7F9F4FC0C5
+:10C5E000FECE3DCBE1E550EF84EF17A17EC3790F7E
+:10C5F0001568DDFF8AEC7F2BF19E22DDFBBC1CC1A0
+:10C60000DC683FAFD5AE3ED9FE0AFA3B62E8B150D6
+:10C61000F42FDEEE6B7B05EDF78E44FB53C948AF7C
+:10C6200016574C34C6B174AC19E90276CCD6D1BEDB
+:10C63000F42B493C4EF3568A9DDE57F005FDACFFC6
+:10C6400077FA1999C2C7A5EA67F3BFD34F78DF76A7
+:10C65000E3793D39FAC6FB9917D08FE2B781032CF5
+:10C66000A19EF2A6DAF6E1F8E6FCDA36A21EF5CFD4
+:10C670007E91F8F4BBCA1D2968F7BFDB6A8A44FBC8
+:10C6800037E7F5B7E34A308E20FB45A71BBF344A96
+:10C69000F0FE5C9FC86CA0A72B7C029573EB1B8DF2
+:10C6A000F96978AEB6D198A71A57993C4EE074FD57
+:10C6B00004951FB33F5927EBCDD554CE79FDA41E69
+:10C6C000E9394757771CCF1FB3A13CEE1538BF1D82
+:10C6D000B2DE3D8CE70D3A8803B4C8FAB9777FDB48
+:10C6E0006788B7B7509F030CE6CAD111BE7AA5F090
+:10C6F000711475E17A3EABC55AF219ADFBD27522C1
+:10C7000094830F561A8BE1F9C1C41187105FEDE3D2
+:10C71000905E1E876CE071C8A288E687C198B16EF2
+:10C720002F5D7CD20CEBB83B9F91E503450FF44B9A
+:10C7300081499197E0892373799C0BE1FF4D363C49
+:10C7400085E7089BBA34FFE233B40F2B42D94690F9
+:10C75000B3FB8784C66D83714C77860B603BD970C1
+:10C760005368CA3468D79A30BC5B0AE92746FE6131
+:10C770006B82FD02CED7131FAC036784398C3C9EBD
+:10C78000E5F8B348F12C477AB0C3D501BEBC323EC0
+:10C79000BBA5F0FD9D261D8C73108E839FEF85BF7A
+:10C7A000B86D186F5ADC4740BE53BE3F2671788C77
+:10C7B000FAFB6312ED624AB4BA7D38C3F6D73B0E7A
+:10C7C00096C2C71193C2E965CF05FE52E9FD092360
+:10C7D000833570E198486653AFEF0A7B6AE0C9453C
+:10C7E000899AF6F7CDE8AFA91F6B6ACEACBC017F82
+:10C7F0005F0C4B0DA7F57F165F871C6AB8F4C51454
+:10C80000F46337895601E6356BD7E62F8651EF1270
+:10C81000C5B94E3589648FC0BD35AAF74FCEB06615
+:10C820003A77ACEFBA84ECDF9C587EBE7B964BBB6C
+:10C83000FFA1C4E53BDA37417B5686E7623ADA3737
+:10C84000F1C7E3AFBA7F929D22AF8707B1417C3D2C
+:10C85000DCBA1766CAF2763612BD6AF6895664D516
+:10C860009ADE0213609CB7D79B5C4130EE336F1F9A
+:10C87000314AAAFD930A5F35062DE0BD23463C4FA1
+:10C8800075305922FACD6D386F64C017B737CC2395
+:10C89000B96E6E744445A3FD027F757B26F2575D29
+:10C8A00026DABF269DC58EFB6173968FA63873B8B6
+:10C8B0006F0A9565B5A3A9DF72DF4482E7FA8209A2
+:10C8C000FE546CAE3F80FD3C136E417B5EAE776ED6
+:10C8D00045BA944BC119B85F35B7FEC0C55FA21DFC
+:10C8E000B5F07B1D63C5BF6462FDD83E165D4D5734
+:10C8F0001C6F10F5D33CE2EF9968970A705D00CF8A
+:10C90000CBB6E53850EE87D7845A50EE453C4FD62B
+:10C91000019FCE48E1FE9EC1C3C73BCA379EFA5372
+:10C92000EA67A72450BD021BA237E9517F28F330E4
+:10C9300080C1C7F20E5F7F2A2BEAC7EBF15CFC9F38
+:10C94000535F8C423C41FB102C93460E233DF35D1C
+:10C95000E59070D681DE524A93AC87A7A01E86FE72
+:10C96000EE4DB555A11C8E5BE4D19B518F86982D61
+:10C97000B8FF312E7BA054A29A8FF8FEBDB892006A
+:10C980005FC56B40BB3D054AB5DE7EA013FBB234EC
+:10C9900045D1DBD54467C50EB12D4F325C874DE5DF
+:10C9A00067B5DAE46ABE2CD7CAFBCD02F7079CDB79
+:10C9B000795C7F7EAA632DEA91E6E16CF236D2A71C
+:10C9C000CD71E3437FBEF187E99B89CE611649872C
+:10C9D000FB0A4AFDF36DF3E0F27DAD79AC94DB7FA9
+:10C9E0002AB285C8179FDE765BB30DFA6D7C2C23C7
+:10C9F0004354D9A9D753F8F94766F15E267DB13B78
+:10CA000058423D3016F71E32FD7E3F9E87C4B84621
+:10CA1000C56ED3463C0F561106EB7CF8FEF8FE8E31
+:10CA2000D7917E8DEFE55CC47B34365C98819CDBCE
+:10CA30001A865CC473F63633681B2BFA41B63F91F5
+:10CA4000BEED64BCD7D2674923E744A13FF11D0C7A
+:10CA500009ED2DD8FDCC160EDB115F8EE55CFE1CBA
+:10CA6000B21C4E93F9B75896C3697A2E870FAC095A
+:10CA7000B760BCB378913000CFCB3129D48A2AC0BB
+:10CA8000807C9981FCC9F9B2CCD75596E778B91F5B
+:10CA9000CEFF81F239D71749ED1439FD53AAE310BF
+:10CAA000B72BCD990B615C77805CA3DE732CEE9E77
+:10CAB0008972E2E713A305F909F824B644C50735DE
+:10CAC0008D3FE8914F0CB902F18909CA3C151FD975
+:10CAD000DBFC134B7E0CFA554BE2752B99BFFEEB3A
+:10CAE00014659FFCFAF8FD53B97D7108F81114FF25
+:10CAF0000963185FBB1025519C74FE0A1824A060BE
+:10CB0000BEC19D8C7198F9F382280E56D252B92C71
+:10CB1000546A4FAF7B7DE9B4BF3CD19744E5C14433
+:10CB20008717E5659A6F928CC7F4EBDA9FCBB2F169
+:10CB3000B89BC165B26E88C7B89B43A4FDB8DECC74
+:10CB4000F214D929653F8EC7DD309E87F1BDC0FD47
+:10CB5000358CC3E17ADA14A5D3EC13B68BC70DD7A5
+:10CB6000EEA79535FE65B00EEA4FC5DB282EF74DD2
+:10CB70001F47505F98C7EC09AED70DEA7D36198F75
+:10CB8000757A7732DAD1BA4A8E9FBA556201ED379B
+:10CB900031163C5E755EF75A7C3CDB9748F851ECE9
+:10CBA0008BA2B77754D1A1CF36FD7D2DBB532EF389
+:10CBB0007B39F2BBB5BD9D51F835909F15FD6C8852
+:10CBC0006E213D7407BC82FE83A2AF0BF286E5A204
+:10CBD0009D1FF67262FD3B30FFD854470EE2E5B66A
+:10CBE000577B67AE03F80EBD4B6F09B91E7DF88306
+:10CBF00081F4E1A2F18CF421946A7D68E8C40FBF4E
+:10CC0000B5EF8DF1779ADC1EFC58EE1F82BE56F709
+:10CC1000373F75C4F8BED074525F6E277FAE717710
+:10CC2000A6C727F5BD313D9E278FFF5A7A7C565FF8
+:10CC3000AEC703F5366863D2DBE776F5A338D96172
+:10CC4000067A1EED5943B0B4395E75CEBD4BB84B74
+:10CC5000ADD77BF79F3E0BE97A1D7A7D36B6FB7721
+:10CC6000F57AFEF837C8AF823FFB5DB7C2FAE3370B
+:10CC7000B0BE43F85358DFC5B79787403908E47B07
+:10CC8000588FD41F80F1353DDD87E20E2007C4F7B1
+:10CC9000E5C0F728078ABCCCAD1F188EFB06EC1345
+:10CCA00091A1FE0F948382BC57F518A7423D8EF8E0
+:10CCB000DA03328F7A26D04EFCD8D7F12CF28F22AD
+:10CCC0000F8A1C5C9B8FDE36E0BAD450769EEB79DF
+:10CCD00028D57ABE337FE6851BE4FF55D7C93F6F61
+:10CCE000FCFCFCF3C675F2CFB6FF847F9246BE4BC8
+:10CCF000FC83FA13D76F777E6C0D5FC0F987CE2562
+:10CD0000023F6462DCB969706F2BC669EEBCC2FD7C
+:10CD10007AD0E9E4D707FAD55364FDF7801C2738A9
+:10CD2000986AFFBC2F9757F2DB8727060F447B7565
+:10CD3000BDFEDE94A84A6683E70F40A9D61326A459
+:10CD40005B07FEFADF6E90BE4DD749DFD37DFF63F0
+:10CD50003FEF52DFEBF0F3926CE68988CFEFDC7A9D
+:10CD60008678BAD67AC0B096E3B9CD5F77EB15BBBB
+:10CD700019897613F8E39FFF097F8CCDABBB68065A
+:10CD8000BA466D3116EAA1FD243C6B41F10CD31A71
+:10CD90005B12EA1BA6EC0B50BCE35351869DE69652
+:10CDA00091308E3B9F62FE7D03A81F951BDE161FF0
+:10CDB0001198BF7DE41643CB2A8A3FF0F32ACCE1D9
+:10CDC000D1F37D3219CE043854056707C0EB79FBE7
+:10CDD00030BD87F1731FF27359FF8CB3F07D01FFF3
+:10CDE0007E9E37BF2BFA7FF58205F717EECB3D67A6
+:10CDF000C478CED83CCFDE9ED02E654B7861483FBC
+:10CE0000785E2FD07807A7765BE34CA2235B363C95
+:10CE10006F5896CDF74D4C758DF9B60EF87070AA17
+:10CE2000D64EE19F3E86E263F467AA13983193F7EA
+:10CE300093107F7DEF23FDE8FD047ADF6D8ABAFE53
+:10CE4000F7EFC9653657077C345269877161A57F52
+:10CE5000A0C9C43AC1D651DC664C2A9797669DAEEC
+:10CE60009C019E0A53FBAFC1B8D728C6F96252EAAB
+:10CE70004D854E1E4762B680F95E6DBC433B98AF50
+:10CE8000A47DDF7D357CD95215B957DE97E95FAABD
+:10CE9000E59370BDFD83EF601CE1518205FDD4B9BF
+:10CEA000F6A0552C1CE92EF335CB2AB4E5C2FC8242
+:10CEB00098268ED7C6D76C70E1C834F9DE3ED567A8
+:10CEC000AF41FADB756DED399F37086DEFA7EA19B1
+:10CED0007E82DEAF4C1DB206E37E400FAA2738E902
+:10CEE0002A7C5E1700E706C805E330C925EA65C05D
+:10CEF0004F7207FBB74FC8F83D23F0F34DCD23B871
+:10CF00003FD79CC0CBADA9DC7F5B23E371BDDCBE0A
+:10CF1000B98B0A0FBDFC74863F37AE0754F3263C2D
+:10CF2000DD1BA5CC7B52E118985773041B20009F92
+:10CF3000BC943A61CD92DEFEF7B7A44E223EF1F7E3
+:10CF400057D88276FC5E194F5B53EF6EC17A3C7204
+:10CF500082F2569ECDF75F4DF5073A94B705EDF98D
+:10CF6000C789F915CA8991F03DC166C8E4FD2474EA
+:10CF7000809F5FB57FDF16F03E3344DDC8FB327D16
+:10CF8000C604D0AF20807E2303E0222DECF783A1DE
+:10CF900067F09F8A77AE5E1A83F1B32D02DDB1028E
+:10CFA000FD6C14E079E396070A43703D2A4A869E99
+:10CFB000D0F6C32DD35ACCA0BFC6A3FE227D5C4CB5
+:10CFC000FA7A22CA39C1D30B6D3723DF542E8D85EF
+:10CFD000F61F6F99B106EFBDDEB764B50191FEE9AA
+:10CFE0009692357AE8F7DECC3FEDC5FEF4D5A52D57
+:10CFF0006384ABF0696DC03CD607C0CE80F66BAEE3
+:10D00000A1CF9704BCBF28A07E5500BC36005EAE01
+:10D010007D7FDA0CBE7F390DE88788BB96BC7C9398
+:10D02000DAE617B4D92F01EDD9C75A7EBFB386C34C
+:10D0300067531F295C1EA282B72C2854F3AF41B658
+:10D040001753A2ECB68EF8F75067FC931A68D79C7A
+:10D050009A73898719D3D8DF3DA2166E1495F12EE5
+:10D060006D79384DB51FC89614E23E51E7FB158B1C
+:10D070000B71BFE2CEDF29F58B0B6DAAF929EDF319
+:10D080007FBC22E2F7F42F57176EA2FD3F79FF2EE7
+:10D090008297B75DBE128674C9C7F3A358DFC59DDA
+:10D0A0003C5F6DE7595D0ACEAFF1317EDFD05903A9
+:10D0B000F400392F6656DAFF6E0C0F5FF812B4DFFA
+:10D0C000F398B810EDD7E1859174DEA8B01FF7C7CB
+:10D0D000F684F7897910E0C6E0078C18576D7C7CE0
+:10D0E0001495EF8BB6655E407EFCCBB564C71B83A1
+:10D0F000C3092FBDFBAD2AC42D59A99F44787444A0
+:10D10000586276A21FBAD2C070FF8931EB0BC427D8
+:10D110004F98C84F9D56DD9FF67B8A7F3F3EBF3BB1
+:10D12000B42B5E6AA0F83FFCD17D0CC7CA5146AC57
+:10D130009FB1442E9DB753F9DE4F6F7E9C4EFB3A54
+:10D14000229DDBD9ED8B380E92CCBE760EA0FB0A69
+:10D1500047E5FC2A6FF773A4F583797CDD9A44F9DF
+:10D160005298450A9B807EDB4DB601FDA2FDEDDEA7
+:10D17000FB49A4FDAA775B8B63906E43FA717ED95D
+:10D18000ED2B8E2956D9F592337AC2F37B46E961AD
+:10D19000D41BEF75E92D38496EEB2231CE3A43F6B8
+:10D1A0009B814F16BED9011F26F513A9DF63A68503
+:10D1B00078169635FE263A17C7A5BC97D5E2A8C1C2
+:10D1C0007C31865ED220B57F7C6BF2883C9C879F49
+:10D1D000BFFE48FA9CFC6380C7BDFCE21A27DABC9C
+:10D1E0003DE0D7E338A26CF958AF9CC763B175290D
+:10D1F000EAB882DF0F5D2CCB3F6F77080F07C3F7CC
+:10D200000F6D0DA2735F879C7F0F55FBC78A7CCC87
+:10D210000CFBD5E1665A17874B421CF08DBEEAF82D
+:10D22000A3F05EC9F306D29B25CF472FF2623DD013
+:10D2300013B70C03BFBBA51F3F0FD0B97CD407C8E1
+:10D2400047FD55E5A3F4E5370B378574241F5531A9
+:10D25000C847F9CF1BE87C755197CA4918472CD2AB
+:10D26000DDCC6A607C239EFF450CEEB3CC7CDE44B3
+:10D2700074F584861EE7F3EA138FF36AB33FFDB8B3
+:10D28000BEF254E790BD1075E09D81FE16971968B7
+:10D290003D22C61849EF8961565EDF85C52F06BB62
+:10D2A000BC34345B42FA6E4679C8A27A09F92C2F55
+:10D2B0007CF21D78AEE5F0C244DA073B99C9F7C1AC
+:10D2C000663DFA6218FA9F871EE6E7BB6763BE1DDC
+:10D2D0005CE7FE9BFB5E1572BE9DFFAB7DAF67FA00
+:10D2E00005EE7BF173A07B16666472BC30C984784E
+:10D2F0008A1B4878B9DDCCA420C08B18C15250FFDE
+:10D3000028FB5EE22FB97E127502ADD38F55392905
+:10D310007F415E98993FFF25BFB7273E3D9ED13E96
+:10D32000585425ED8345C8789D26303BCACFD1207F
+:10D330006BDCBC34E4BF20A2E7CC17667DF16C2621
+:10D34000D26D6C94269E80FC17ED7FFF44F52D3442
+:10D35000BE1302B3A0BDCFFB43DF91489F46D1F17E
+:10D36000F4BDA4378369FF9C593C4F0C01786635A6
+:10D37000ACB319F24DF7B884347F3F33173F968230
+:10D38000F4CEFB43901BCFDFCC5812B416CF619480
+:10D3900035F07BDED3567C47E77159BCBE12E39C67
+:10D3A0005F2F09E2E7D4EB8710FF4CD3F1732E2CEB
+:10D3B000CE48F1A5B21019EE954DB0EAFE9211E9F2
+:10D3C000A1DCBFF918F50A7CFFB4820FF41B51EF02
+:10D3D0002AE7E859A584F25FA4133A3CE7F5553FE4
+:10D3E000EE9F4E8BB3D279D1F2DF9AAC8BE3399DAD
+:10D3F00045559EB9729D377F2DF6AB63D2760BAE45
+:10D400001F9A4B70BDCDEAFB521E820A3DD31B23EF
+:10D41000E0B9C4F599329E0A69FCEDC44F7A7650A2
+:10D420001F81786CFEA219F96371A8847191F2AE24
+:10D430005607F51B6AB6703B217F17C79E887CE0B4
+:10D440003346201F7C21E84C3CFF804D07F5E71850
+:10D45000AF6FFBCE921569346FB34537A23BF2DD57
+:10D46000F9FCB5F0DEED4C4AE88EF7C456444E9A0E
+:10D470008CF5AF89A49740987E9B8DFEDE6B62068B
+:10D48000AE53A7ADD843F39BF3C640BC41C0A6BD85
+:10D49000FE19D9A739327F79E4736BC500BF01A5A6
+:10D4A000FE266E271C22ABAC2358D0EC572AF5E59C
+:10D4B0002B0C448FF2A526A27379F55FA9DFF2D079
+:10D4C000E618A447F97603E5EF08BD49A2F6C5D5ED
+:10D4D000BD730FC2B88B0DE116011E9539C71A1125
+:10D4E0002EAB150856BE57BEE2F3185D1AEF0F4B70
+:10D4F000938EEFB3FAFB8D8E437B767A6B64DC34CC
+:10D5000015DD4F2FD91186FBCE4783DCC978CED7E6
+:10D510003B2FC88AE70A9578DAE925C9FC3E90A531
+:10D520003914F7AB673C9C188176EEB0C56DC4FA30
+:10D53000C375F178648ED92C965C846DFA9B093E94
+:10D540002D9F23A13FCC1F2870BE29DBBAC79800AE
+:10D55000DF1B24E3E7CC6B47F70E457C001F5950D7
+:10D56000FFC435A7A01D2ED735A7F444FABC2290DE
+:10D57000BF00EB531BE61F998B7C3508F4A1CC57F9
+:10D5800073EB772C40F92C7FEB643EE2F5CC5866C8
+:10D59000C4F858B93C7F583F7EA087F6E5DB36E4F7
+:10D5A00033FEFE07C8778ABD07788901E026238706
+:10D5B000336EE2FCD364F450DEBBA6498CD1FE99F5
+:10D5C0009E8DC47640797E0F4014E5FB6995B113BA
+:10D5D00078DE3DA7FAFCDC5CAC4FF3D777C6378525
+:10D5E000325F14579BC82E15CA78F1ACD81E867CC2
+:10D5F00071E6B53D7B87A25C6C132C4C2D0F8A1C09
+:10D60000C679793DE0EF49C4DFB6F3F998876276D1
+:10D610006BA8843454F0A4C89B82970AC6F1A0E09A
+:10D62000A5422FE349AEBF5BC64319F3527FAC75E9
+:10D6300080B419FB7FEB07DA6F3B338D09FC9C301C
+:10D64000CF8BA6CCCF11A1DDDF5F26CF6FFA4DDCEB
+:10D650006E9659B85D2C8B6252F540E2339B51C9EE
+:10D660002F094DCEBC714433FEE7653968A337CE30
+:10D6700003C6E9D1F17B8281FAEB51197F47AAA752
+:10D68000B851AFCC76423F99280F96A9B8CFC95E62
+:10D690001765FD0D32A9FA6EDEAB47880F41774959
+:10D6A00011B066316C8171A0FFD5DA9BE28579DD1E
+:10D6B0003C34EFCD632C4C07FAE488E009DD89F6B1
+:10D6C000E05191F494324E9BF363A287AD8ECB2749
+:10D6D000F20BC60715390D1CEF3279BC269DD58398
+:10D6E000E782D96281EEAF898BCF841EE4F68E2269
+:10D6F00089FEFE6FF900F7236D17C324816AAC7AA7
+:10D700006C37F7625802DAEF2372DCE1C8D21D6190
+:10D71000C52A3AACEBEC3BCB864848FFBC90838FE4
+:10D72000A11C3D759320F3BF75E442D40797C22432
+:10D730003C2FD514E14C433FAA49C796B308CE8786
+:10D74000FA183FFE405E087F502F3D65F1CBA532B1
+:10D750006EA09B1BE906ED6D5C8EACB48F31378AF1
+:10D76000EF8B5E5B9E323CA49FAA056963A6BF9DBA
+:10D77000722FEF7179DE2423317E7B80FC89F6CE17
+:10D7800024E7310ACC837A7BAFAE7188BF8A10B3AD
+:10D790000E977081F581B07F3D55A9473F9F2D8938
+:10D7A000DDABBE977634C849F7CFBCDD45B611E88E
+:10D7B000513DEF237E9EB781DFDB52EC34FCAD6A36
+:10D7C000E33F78AF34F37C3EEAD73FE698E85E5318
+:10D7D0004C7F7EDEE514AB330E47FBFF6D737E9806
+:10D7E000E45F9FDC72D12D8693BF10AF591F94B5B3
+:10D7F0007E40F25CCE9AE93EF6B4159F8D1D82F410
+:10D800007ED940E70766D4C6939D3BB9697A06CEB8
+:10D8100077DAD26482676D7E90C32B78FEC3694B42
+:10D82000B35E42FFEB68902D1FF9D9BB5AB0E0FA06
+:10D830006AD8E6AC45F741FDB0D03E5D71DC873675
+:10D840001D1D8B743FB45024FD64DBF4D424ACB7AD
+:10D85000ED14F1C618AC672C8B30AF29D3875BD0A1
+:10D860002F50CE17D618B8BE3D2FEB87936D25E706
+:10D87000D3BC9A9A14F497BC1BC01EE1BEB7D15B0F
+:10D8800042E7BB058B7523F0CBB782936066B1246A
+:10D8900054E7E07D96F5941FE75CB2C9827EF2FD05
+:10D8A000266645BFF6FEF77A0FC2A5824D5E578DFC
+:10D8B0008DE4DF55F0A57CDF2BF33D135795D0BEEB
+:10D8C00043A49480FAAD493E377E541EEFC9252FFC
+:10D8D0004F42BFE0E496E408A6C2FB49394FD32C7F
+:10D8E000D083DB3A58EFFD7893127770D1774AE511
+:10D8F00078E03E436D2FCCFB1978BFEBC486203314
+:10D90000E6E70DBCE775C2C0ED47BBFB5E3BB570FB
+:10D91000609EDBC0F12865BBFBFFFD433AF4E315D5
+:10D92000390B7CBFDD7DF2A4EB3B5F8579C9F0BE8E
+:10D9300077D34D8CC63932F8C737515F97D49A2CBC
+:10D9400078FFFE589044EB2167169336A39D314B28
+:10D95000E1B89E3FB62F83CEFF957CC548AE4AEA1C
+:10D960004517A62AFE6075DFDFE502FC60BDC18AAF
+:10D97000EF9F5CB37A1217336D9E856CC6E57326F4
+:10D98000AC93DC16FFBA2870BD347BED1B748FF0AE
+:10D99000E75A2F2971A4407CDFDA5FCE4FDAC9FD48
+:10D9A000B9F7806DB207B5C7776B9583D64567AB7E
+:10D9B0004AA9CCA9DB90D753C2FB14477E3B0CE5A8
+:10D9C00026349CE221AD5595B489777667C665BC4F
+:10D9D0001FFA6E48B805F5C5D9AA85F2E502994F38
+:10D9E00064BEBCA5BE51ECC9A87DC33068BF3B2452
+:10D9F0009CEEBA24D9B2C3D1CE2B740DBCDFACCC13
+:10DA0000EFD4A39CAECA784F6D991E867E67E3BAA9
+:10DA1000C8869C283C9E1B6E417F7BA67CFEE5F859
+:10DA20005AAE6FBE3587BF3406CFCFAC9F1883EB9D
+:10DA3000BA070D5EA315FAB5EE1A1F8671BC6FF416
+:10DA40009E30BC6FFC0DB477A39DD0BB44D4734310
+:10DA50000B18EDE30D75EB99144F5BE6C41739AD68
+:10DA60007A17D2F5B4FBE29E2BC847AD3A8A77010C
+:10DA700066F65C81F6D6D03E14277CF06DBEDE647F
+:10DA80003F76E1F501F7169FE9CFFD9613EBDF1C1A
+:10DA900047EBF34D060B8EF3ECA6CF63F01CCE6C78
+:10DAA000C6CFD77FBB45A079CC067E0C8A47FDC088
+:10DAB000E3A0B341EF9B85F67C98B7A59AF8703642
+:10DAC000F021E6F59E6DE3F99867633E6689B5CB74
+:10DAD000FFD155E6BB39C077787FF7E7CEFBF13B46
+:10DAE000850F03E45EA1BB821785FE7E3E649AFC2F
+:10DAF0008211750387F7647E7DA0DCEF607ACF2A00
+:10DB0000BCA7B1400CADC57C55FBF5957FA0BC2DE5
+:10DB10004E3DDB4CF69CA562BEBC05E24D568C0723
+:10DB2000D6182BDBF2BA607D605E173184BF3F1ED2
+:10DB3000F313C37CBBA6C5D3F72658ACA310DD8670
+:10DB4000280FC505C43C9D8DEEE5D59868DD1CA861
+:10DB500087EA64FADE95C6F5D0FFF4E7E7B5957B72
+:10DB60007F4A099AB137F2FBF8E0884B1234D9D5D5
+:10DB7000FFD0DDB84F3B7E58C42F12E1FB7B5F3DE9
+:10DB8000CAE18C88ED090037F5FFFA6EBCC731FE9B
+:10DB9000E6882C03FA01D5C7EE1E09F0F1FEB67730
+:10DBA000FBABBEA3F40BCF77E3F37FC439DEEF4FBB
+:10DBB000CFBD2548EF734218CFF796E4A538A8F2F9
+:10DBC000DE01811D7E57F0C31E038BC3BC06FF839D
+:10DBD000BA3BBAF3B27B9AED63FE7DED73A4D077C6
+:10DBE000B8CE94F77F7466C988FE9FDD6AB4F2FCF4
+:10DBF0008ACC6E06BFEA2E997F8BCD974792FDADFA
+:10DC0000645613263059AEBD8FD5CF7F6F6FFD8D13
+:10DC1000DCDB634E9E87AF46CEC3D7D93D4AA1E138
+:10DC2000A31FD0BF0CBC3F95F149F35BC827E3802D
+:10DC3000AFD05E643673F82E994FCA778CA57CCF2F
+:10DC4000F30F185CE827CC92FDB12447172641BB9F
+:10DC50004B20BFA8175AC7B953507F9CA862B5493B
+:10DC6000A0B00ACC8E4BFD014F4DF11F515EB41395
+:10DC7000EB6BC2D0EF3903EB8931D04599ECDFB3C0
+:10DC8000CBA2FB36F483E3FB6D5CA9E2B79F643E55
+:10DC90006B8D77C7E1FAC6196FE2F91A2FEFA13C35
+:10DCA000CF0509A3B3308EB4BF6A273B9AEC7FAF90
+:10DCB000B3FB284375230C69AA7DC971FA8ECF691D
+:10DCC0009C51F2696EE2F6DBA4AFA53C5A40CACA89
+:10DCD0006A82ED14578A451EC5F8B0F410C1CB66B0
+:10DCE000310BDD63F5EFD3D17D5085FE36EB959199
+:10DCF000D86E1CD01FF58DCEECD5236C2FE0E753EA
+:10DD0000FA01E1509F28F41F252EFA2DD261BE7C26
+:10DD10008F6BBE50C9618399CEB906EA478C6B16EA
+:10DD200091DE74EECD417F0CF424E55590F5A2040C
+:10DD3000FFA3BC48D91B8CD4ECDA7991F6E6FC073A
+:10DD4000FA31234D9B475CA193E25F754627454F0F
+:10DD500002BD86A5455F3FBD943C65F39FE7F1CECC
+:10DD6000F9CF4F8F1D44780389437F28ED4F44C47A
+:10DD700099F21CD8FA48E263C308BB84FA76ECCE69
+:10DD80009E4C8247B3760A74BE75CCCE4882C37C63
+:10DD9000DD795E25D9DE8FFD63B711189F3CF9D27E
+:10DDA000DF1FC6BCF7637EC3287EAC0B0EA17C13BD
+:10DDB000E208398F8318F221DE63BD20F1DFA1B0C4
+:10DDC000B376F9037444FF267E4E1656794E4E27DD
+:10DDD0007EEF6FFE3E6EE7E70FE7FB8217F00D6800
+:10DDE0007FA150A43C4DCF04A793FF5673B781EE9B
+:10DDF0004730A7ED2FB8AE9A2CF383291616962A32
+:10DE00007A054920AF2AFA3C1EF4DB0F1DD0BF076C
+:10DE1000D65D420FC682532334F57A67D037983FD8
+:10DE2000D6102B5A5C30FE506B0F4D7F76B1CC80F4
+:10DE3000F114E6E07EB4C25F4C6CD5D3BDF95C9EB4
+:10DE4000BFE2EEC9DA7B9286DCF323C9DEE46AFD29
+:10DE50006FFB35F236FD4AE1A77EAC9F9C979EECA6
+:10DE6000FF85167E3F4462F6B58ABCA0FE07EFE64A
+:10DE700019C4CFA42603734984BFD7B0FE82D364EC
+:10DE8000C178409B1F9E04EF45A19134139F635EB0
+:10DE900050F53C312FA81A2F9817540D635E50751A
+:10DEA0007BCC0BAAAEC7BCA0EA7ACC0BAA86312FDA
+:10DEB000A8BA3DE60555C3981754DD1EF382AA6142
+:10DEC000CC0BAA6E8F7941D5F59817545D8F7941A7
+:10DED000D530E60555B7C7BCA0EA7ACC0BAAAEC7C9
+:10DEE000BCA06A18F382AADB635E50753DE6055557
+:10DEF000D7635E50358C7941D5ED312FA81AC6BC59
+:10DF0000A0EAF69817540D635E50757BCC0BAAAE51
+:10DF1000C73CA0EA7ACCFBA98631EFA7BA7D335B78
+:10DF2000928C766C77BCE37FD268DFE95BE2E783B3
+:10DF3000F7033FA31C364DB450FEC21B5C277E9EE8
+:10DF400026EFF7C8FC7B89854CC573E89DBDAFF013
+:10DF5000E7EBB2BF01F66039F12F0BAD457FEE71F3
+:10DF6000BD8DEE4339EBF8FD44A6E77EC00251F6C5
+:10DF70007FE4BC100B4489FC00CC1DAC578DA7ABD3
+:10DF8000CDCCF42A3C4416583470B43D56D3BEDB95
+:10DF9000644953DFDD91AAA9EF596AD5C0BD2BB3FF
+:10DFA00035EDFB2CB469E0786781A67DE272BB0693
+:10DFB0004EAE9DAC69DF77AD4353DFCF55AAA9EFD5
+:10DFC000BFA552030FA85BA8697FF34EA7A67EA04A
+:10DFD0007BB9A63EA3A956036735AFD5B41F72D04F
+:10DFE000A5A9CFF16CD1D40FFBB64E03DFE2DDA9BA
+:10DFF000697F9BCFAD8187B37D9AF679E6031A7866
+:10E0000094E54B4DFBDB638F68EA474B2735F5659D
+:10E01000A7B97FCF6A607D8071CA109E5F63AE9B97
+:10E02000D5A17F7167EA794D7B4314AC17807FCA15
+:10E03000411FA2DFF77D9738CAC7CC2AC3AC78EF5F
+:10E04000DB39A2F20FEA7BDE63AD3F68BEFF4C70A6
+:10E05000983B88D61766B2B7230624907D6CCB27F1
+:10E06000A2DC67675E161B4521212FFA4702FEC21C
+:10E0700012C061369E171AFC20F29F2CE017A1BF38
+:10E08000D9B62ED2C5C7A35D0EF6FBC5BDAEA8F2AC
+:10E09000BC5CCB2FA66F67519EDE5103301E5EF72E
+:10E0A000463EAEB36631E732DC4F54F22CEE0FD26F
+:10E0B000C6B79472B419F0ABFADEBEA0DA5E83AED6
+:10E0C00022EFA3CDADD4BEAD5F39FE25C064E7AB72
+:10E0D000FAFF2DACFFF420D7B555207FE00F3D5956
+:10E0E0006521784D552CC14F574954AEAD4AA5F224
+:10E0F000B92A2BD5AFAFCA26F8852A1BC1AEAA0212
+:10E100002A3756D9E9F9A6AAC904BF54E5A0724B2B
+:10E11000552995AF545552FDD6AA8504BF5EE5A496
+:10E12000B2AE6A393DDF56554B707DD55A82DFAAB3
+:10E130007251B9B36A0B95EF54D5517D03F86F084E
+:10E14000EFAE7213ECAE6A22F8FDAA66823FA83ADF
+:10E1500048F0DE2A0F954D55DF52F9E72A2FD57F7B
+:10E1600052E523B855DE87583440D0DCC753603DB4
+:10E170003BC6FD3DCC5B817918B20D67AF961F376A
+:10E18000900EA7E4FE0D23C05DC238728F948D35CA
+:10E19000AA75C5F201DC5FACD6F1FC2DD53D98A582
+:10E1A00086FC761BE3E7B4B8DF3E13FF25C1D3A896
+:10E1B000AABDB8DE28A9E479CAB3901F53891F3FCE
+:10E1C000B9A1759ABC2ED891687F6600AE43425CB7
+:10E1D0005FC467FAEFD11F4C743C877C7AA1F2C10F
+:10E1E000BDD87AA6C59A821F196B724763FE2FEFBE
+:10E1F0003ED1BA51EAFC7B15F2FD874EEB779FECDE
+:10E2000085F6AAE02791E2FAFB0DA193719F7FABFF
+:10E210008C8FAD03749AB228C9FE2A8EE74472E54A
+:10E220004B0F09FEFBFB77E1121FE47B3C93280FA9
+:10E23000CE4466FB105DF0BBC11144F81EE6A4B2EB
+:10E2400035C1518FEFDF0B0B10841D434D711DCD78
+:10E2500027703CBBE5F1EC96C7A1940B92ECBB1088
+:10E260006FC7926D9AF16C95F3338C63DE17705C17
+:10E27000FFDC75FEB890E8C7775B3C8555529E8CF5
+:10E2800022C6E3298F635E8C287F5E0C65FD50B447
+:10E290008FFFCE11FDA1FD5C104FEBDBC0BC19CB95
+:10E2A00086EFE17930603D86F77F8BE6FD82F42FC3
+:10E2B000FE1E14DEDB5DD0E530E599F1CC025EEDAB
+:10E2C00049793578DE1B0720B027E5D5A07AE1260D
+:10E2D000F87F771C9739554FE3EB42F94E9E09DEE4
+:10E2E0004F796930A660EA8A798F79BC66BFFD3CB8
+:10E2F000F7BBA3BC743F7547A2E3EB013C4EFE7431
+:10E3000006C689909FF03B16179D5F037E320A80F8
+:10E31000A29951C04F1DF81B0ADFCC95EFE128CF21
+:10E32000811F5B11DF67DF1E928A7C53B13B47423E
+:10E330007CD7E8F87D3AE79FE57D41F9F710C4F016
+:10E34000B40D74EF009D71A46F4E28DD3B6814D9A5
+:10E35000C2373AD0AFA1E95CDEF7C7F27C92350153
+:10E36000FB93C6744E77633AE787B1EFEFA33C6443
+:10E37000739B78BC9A657AD2EC1D9CCBAA58F89B0B
+:10E38000A79354F3A8D879849FE7629E34F539AEF9
+:10E3900064F9FB0AFF89C650C78610F5F878FC01BE
+:10E3A000E420243D8BE4E038DEEB1E6792C2EF11DF
+:10E3B000E8F7C1CE627E19C71F2C741E503917387A
+:10E3C00083D9A99C099613F9DEEE5C4DF7E767B394
+:10E3D0003A7A3E377B7A1CC215CC3B3216D747CBF4
+:10E3E000AB3FC470D0C4DAD5A3BAC3BC26B8A67DEF
+:10E3F00088E5F84DC271A74472D43B1DF7B785CAB2
+:10E40000A53DE07BF76D1DBE14E3D6E3444E07F651
+:10E4100031A74311F0B318D17E7E203749E95C6EF5
+:10E4200068FC8ADC142D66363C7FA0DC0F6993A360
+:10E43000EC39FFE8897B38E04F22BF56EC3645D0F7
+:10E44000FA14F3CCA0BE92E567A99EFB974E4C6DE3
+:10E450004AFA93FB1B069B9CCF8B717F648E93AF14
+:10E46000C74E19B8BC9D3A14EA42FE5ED0E5F538B5
+:10E47000920F83221F3F4DA5F33D0CFC8F5BDBFB0E
+:10E480001F6D79667A31F237589C237650A2DF9E51
+:10E490009FD2B90687F1BCFCA3105F7B63F9FA79C0
+:10E4A0000EE6A1C1FAAE7609E3A5A7A2CD745F2856
+:10E4B00030CF1963569A9F419E1F8C6C32FAD32637
+:10E4C00039AE561330DFEF83E268BED27056C7D044
+:10E4D000B1D05B9CD351EE1FE2766241975F3BF077
+:10E4E000FB9E20661186D17C281EEBD4317B0D8FDC
+:10E4F000CFD2FC16EACD163C97B36C9AE811C84E01
+:10E50000C038319E1765B6F2BCAA4AFEEDC0F1DAFA
+:10E51000B4E333C7319C9F4D64DEA0617CBC383EC0
+:10E5200027D083E803F034D5F8A05F17E5FF0996FC
+:10E530002CE88735FDF8108F2F5773FF11C6BF8564
+:10E54000E8D31DC6DFF3DAE337208BC2F817A4C780
+:10E5500013DFD5E00EA28876B62BE9DF0941F64736
+:10E56000900F931C2B7BCDC7B8468EC98AF13B76A2
+:10E57000B9A617EAA91026515EAD71369E570BBA9F
+:10E580005B82FC301EF3D659C80F6855E761630102
+:10E59000F135200BC55727607C8DDF25FA00E3B3EA
+:10E5A00013E5F3CDFDD8570AFE28BE26E2F8285E13
+:10E5B000EDA0719A90B25006619C87E8E0A27904C0
+:10E5C00033B71CCF6E26FF60B5CC87430F32B21332
+:10E5D0004343B89DD87D84B9F0DC57E30F93F242F2
+:10E5E000A17EF7793DE929C013E5037CE7736E57F7
+:10E5F000769F3CDE13F703AA7FD8DB13FDC4DD064C
+:10E60000875881EFE7982C8BADFEB846C3C1101E2A
+:10E61000D791E37CB7C8F36C60CD3515509FDD5DB5
+:10E62000641807CC6A7107A33C638EDA8EF61B73FD
+:10E630002F1A35BF6B61B068E16CA682E3F1E85137
+:10E64000C0EF7FDEE03A775BBAF6F729DB7EF7B3FF
+:10E6500035EABA7EF733539EC7AA74FBBBE964D789
+:10E66000268832DE05C417E88146C4F773E546FA0A
+:10E670005D83C67263778F6A7CB5B3FE49F87DEF20
+:10E68000C77F92DD7A2F4BC98F531784CF8DCE5021
+:10E690008ABB3D77594771B775A55FD3FAA4369BFE
+:10E6A000D1EF88D55E2E263FE05201C34D24567D22
+:10E6B000EBFF9622FCBB5BCCF4BDC0F1EF027FDE2A
+:10E6C0000D847A17FC79775FC6DE067F1E61BCCFAA
+:10E6D0008AE576F0E7B174813F8FE50BE0CF633BCD
+:10E6E000F4E7B17C0EFC792CD7823F8FE5D3E0CFE5
+:10E6F00063BB35E0CF63F924F8F3F81CC69547E314
+:10E700003AC8E8DEFEE2E0B015E86748CE50F237DE
+:10E710003EB50DEAE251D9D95B2FEA3474CE6DD5FE
+:10E72000FEBECDD063119ADF3FC9FEAA87A67E70D8
+:10E730004B82A63EDEA9FD7D9B3E0BAFFEFB363D28
+:10E740004B4704FC3ECE1D01BF9FA3FD7D9B68FB94
+:10E750007D01BFBFA3FD7D9BDFC9F932153AA648F5
+:10E76000AF05215FAC2B9D10CE3AF02F94F2499962
+:10E770001E0AFCD4A3E2E48EE2C85137737BFFFE8D
+:10E7800021D3BE4D80CFF758B81DE3EEEFD974A466
+:10E79000979E5B1B4271589367E849E49FF76C4C66
+:10E7A00042FE79EEF2882E389EE140467CDEB3943C
+:10E7B000DBA73E374BC4CF3D4BBD22DE17BDEDB2CC
+:10E7C000D78AFCF85418FF9D2DE8D7B518FA7B7F3F
+:10E7D000ECE07E18C7792E04F819E5CDED0D4E0258
+:10E7E00038FC8A8EA17E045B4979FE9DCF86C8E7FE
+:10E7F00051AFD07DB870D4E9A097DE2BE5DF4FF1A3
+:10E800005C0E56FB43BFFBE95A7861C4579DD6DFC7
+:10E81000313B01C7EBC73BA84628535829FB2DE2E3
+:10E82000A38CCB4F6DA98EE4E912C813E207664DA5
+:10E830007461CD5A797F12E5434D87B2841538CF84
+:10E84000E7D6E869B76C94B875DFCDF0CABA16910F
+:10E85000B6D9258B37B823FF4E19F73A1B9F5F8433
+:10E8600095E9D0CE45003E5DB49F6DAD56FF9ED577
+:10E87000B3B27CFE5E96CF67647EC0F536C2A3C499
+:10E88000F5A353701CD95C5F033D05BC8F75690609
+:10E89000A3DF11FD7D6142978EF27CAF91C7F182BB
+:10E8A0003CAFF5D82FC93397FB5162D170EC679D0F
+:10E8B0009D911E5F67FBBA1AE376970A79BF7D16B2
+:10E8C0007904C46FAF4AAF80FDF77ED84DA54B1ECB
+:10E8D000678FD266AA57FA93AC2ECEEF655FB32648
+:10E8E000982F1EB215C95EB4527ED4757A3D433B53
+:10E8F0008CFA0CE14B663D9E91603D661D63789FEE
+:10E90000B936444FFB14EBE69E2278B585C361CE41
+:10E91000CA343C7FF1B63C9F30A7936057C07C520D
+:10E92000A407C2D5BFE71A58EE90F1BC5DC6C7DB9D
+:10E930000687EE028C63C85F45FAFD8ECEDE53EC8F
+:10E940006CF657BA00FDD34523FFF81B7BB25DF888
+:10E95000F5CDB87E76DAC92E28EBB6ED63B87D5DCD
+:10E960001D3CF5635CF717CA7CF44CF0B80FB1FEA0
+:10E97000B3D1FC77701A47DFDE5BAD2777CAE3DEE1
+:10E9800021E33DC7693BF430B41F6F37E1C8C08C49
+:10E99000D97AFF02FAB38F11AD6EA05B4B96220FAE
+:10E9A000F66094BBF7C74C6707B1FF02BEEFB4BD7A
+:10E9B00060223D9798FDCE01F0DE5F9AF5E4CFC06E
+:10E9C000F3ABCAE37E19FF9FC8E3F8B38CFF269927
+:10E9D0004FF7A21DE98B7196542ADF97ED885BB63D
+:10E9E00023BB653BD220DB91B7D18EF4C5794DA610
+:10E9F00072BB6C4732473F457ED225CC8B2BA01D86
+:10EA000099CB96C138F361FC6207F6EDAE6C31E04C
+:10EA100077B2823574BA333552038F967A06FC4E3C
+:10EA20005762C0EF78F5D7D4E79933027E076C9828
+:10EA3000A6FD6DBE1101BF23A6B523438F4DD0FAAD
+:10EA4000335FDDA7A91FDC52ACA977E23F60BE5956
+:10EA5000C718CF2F1B9CFB04F24BD671BDF2FBCC29
+:10EA6000B48FA6F85B81FE4F166BDBC7D3D13E9EF9
+:10EA7000934978AE93B6961334F5E43FB518EC3D60
+:10EA8000F1FC61F578E03B3C87D8523286D13E3CC0
+:10EA9000F02FC85396FDC457946F542CCA203FE9F9
+:10EAA000A25EB39F9613B02F661FA9DD37CBBAC6FF
+:10EAB000BED9B19B3BF91DF6D688EBF2C7409E4408
+:10EAC0001CF733C153F720DEDEFE92DBA9C62F1FF1
+:10EAD000E989CF3FC0A6D0CF8E6F1E21BF6B479B69
+:10EAE0007C3882D5FED6760FB7176FB524ECC47587
+:10EAF0004666B4407A30F3C8FC29C48F2D3AFA7DBB
+:10EB0000CE94828A60C4CBF6838B83B5F7A754FA80
+:10EB10008108A5D20F22B232FFBDBEFF07E9D10F97
+:10EB200034008000000000001F8B0800000000007F
+:10EB3000000BED7D0B7C14D5B9F8999D7D25BB812B
+:10EB40000D09B08104260960AA3C36EF4D48C22465
+:10EB5000048C1AC8427804C1304978A48A9AAAB5AC
+:10EB6000D86233211062A4121F55B08A2BADDAF699
+:10EB7000F6B65425A0A22CCFAA5058306844D4052C
+:10EB800014ADA5F7A284D6F6CFFFE73DDF77CE24FC
+:10EB90003BC32640DB7B5B7B6FF8E9E4CC3973E653
+:10EBA0009CEFFD3A134208F94AA4FF8B1F4E0269FD
+:10EBB000047FBE4A81FFA7F4B6A19F5C4D02F6F028
+:10EBC0007686A19D6F185F62685F6F183FD3D0BED5
+:10EBD000D130BE56D7BF2D3473A0E2A4BFC3CFA49B
+:10EBE0008BAF5B1A09095CD53B2EDBEC133D632F21
+:10EBF0001E97D369EA9D97FEB7F3FD25A6F3F1842E
+:10EC000074748A7E5B32BD1E5F42D42C3A4FA7C912
+:10EC10004F04BC9A08EDDFD6C5DA36A23AC6D3FE59
+:10EC20002D9D664F9B44C80EFEDE31BE85037D31AF
+:10EC3000844C329F8DF85EF982A9777F04E69B3978
+:10EC4000904418A75D77F179038D76BC6E6F74914F
+:10EC500080ADB75F8CC9EEF4D17574844C1E7A9B7D
+:10EC6000AEBF248ED07DEF762E76C0BC74BD840CF2
+:10EC700023E4DACD23AA9A461122D1759BE83EB649
+:10EC8000844CA48DEE33EB287B7F96458E734580B4
+:10EC90002B21263DFC2F9A8FFE009C9CA2BF8DC28B
+:10ECA00065D7FB73E2C6D3F95FEA1409ACC7AAD4EF
+:10ECB0003B7CE368BB8BAD4B9B77B25DD4C1A19825
+:10ECC0003874F8283C3B48D7CE3A41D7499FB74AD9
+:10ECD000157100DF4BAD939068031D0D32B487E9C9
+:10ECE000C68F9128DEC6F58D8797381EB6001EE8C0
+:10ECF000C65E8AF254F922C06BCB07D67A7FD8FD64
+:10ED0000660F054A365C4D78CD3A61F204287CCE18
+:10ED1000779A3C00BC3C57BBD810619EFC8FF4F442
+:10ED200099D319AD83171117F4CB07CB8F37ADD912
+:10ED30001336FEFB9E98F8D3D7D05F72492EEEFFB4
+:10ED400012CFFFA9515DB3C742E99892EC663A8EA3
+:10ED5000B82A0949E87B3C212B717F1A1C892B8E2C
+:10ED60006EEE72F0D48ECF5D84AF3E9EEF9D472550
+:10ED700064308527052F8C5B3BDEF7B887B6496882
+:10ED80008608EF7FD0719B18A2EB7ECC71DB6EA062
+:10ED9000CF037FB64AC0D73BFFDC9108F7F7A76FD8
+:10EDA0004D04BADF4FDF1D84FD9929D668DBAADE4A
+:10EDB000E400FA7AB3F308F28F4482374CC882B683
+:10EDC000C9D34687BD9A563990F403B7D7399DEC1D
+:10EDD000E3FCBA87F3EBAE4637E76309AFAF35A67E
+:10EDE000E1FDED8D1E6CBFDCE8C5F6B64619DB1DF6
+:10EDF0008D65783DDCE8C3FB871AABB0FDDB46854B
+:10EE0000D161DA9DA5208FCE275200D07DAD744C04
+:10EE10003747C2E775929ECFAE75EBF96C0A8573E2
+:10EE2000787BB27DB8812F5375FD93BEBC5AD75FF6
+:10EE3000783643D79EF869BE6E7C5EA844D7CEED87
+:10EE4000BA5E377E6669A5AEDF57305FBF3ED189B7
+:10EE5000F265874B40B93C3DAB4ED7BF037E0139CD
+:10EE60006C17FC6A32C0A5B25F791A00FCD8008E1C
+:10EE70008C8F7FC3F1B317F06303BC30F8BF0AF087
+:10EE8000A7ED5700DEF49ADDADEC1E28811CA8C763
+:10EE9000B6356DA0D343E1FFAA5344F9BFB5B10124
+:10EEA0009FDB7FBEB65BC4F53A24C0CB0EBE9EFD91
+:10EEB00016A55B8C87B620AD142E5E5776979EDF25
+:10EEC000C7942D44B9B9A3F3A403E8EDB52F2F4F90
+:10EED000EF69E37E432A27037D1475525D957C69B3
+:10EEE000FDA7E9AD4BCDAF8D03BD1A495F18E7BD56
+:10EEF000FE4B4524741FAF76A90FC7403BF04D5120
+:10EF0000A2ED9C2E6532E06D4F9AE012051C375938
+:10EF100086755F387203DC7F2D6436C1BA0F5C18CA
+:10EF200044601F3BA8DEB5D1716F92D4B51328BCE5
+:10EF3000035D5FEC07BE549D16CF6872F13A52D361
+:10EF400045942B5BC6DA4CC204D0776612180B7C52
+:10EF5000AE203C3BBE4C71C2754B9AC8EF0791DFA7
+:10EF6000C7A7BBF0B9572F64C443DB4482280F0204
+:10EF7000DDA6327F84FD8E87F750B9937DE143870C
+:10EF80008B8EDFD75DEB00F9F25A179B3F7B45C8AC
+:10EF90000170DAFFE52627DCDF919689F3EE1CB7D6
+:10EFA00014ED8B1DDD26A4EB1D63D73833B2709FA3
+:10EFB0001E80DD8EEEDAB5E940D75D666C4B4421EC
+:10EFC00041A0B734A667B774D79223B4FFBC47F407
+:10EFD000039D6593F67D03E0FE90355692C2E06F87
+:10EFE0001E42C8ADEC6132D9A59703255D7A7D62DA
+:10EFF0000D2D983503EC08A067DA9E668ED3F5EFE9
+:10F000007F7765FC4CC00B8537DC7BADFB8EFDE369
+:10F0100040FEF859FB0FC77F621D48AF4DE3D60C89
+:10F02000BF0DC66D71786C12F428E40BDACEED36A4
+:10F03000FBC1DEC876EAD7B1FF1B9508F72DDDCC02
+:10F04000BE3A9FC6F6B3C353471EA0CFBDCAEDAFAD
+:10F05000C9274695C3FB0E50FB09EC8A573C2FC4C9
+:10F0600065823CF38A3A7AA3F0417A39DF49701E0F
+:10F07000FA33601A8543011B42F9D0D77C3BEDDFA0
+:10F080009F6773ADA4A8DE7161D7EE3B683B374143
+:10F090002422DDC937FDFAF5E5FDD4A16BDFFAA91D
+:10F0A000DE2EB11181EB7327CA81BEF867E259AB3E
+:10F0B000EEB969669B6EDE5C12D68FF8B4F6F62761
+:10F0C0005FDA3ED9CAE59A669F6CB528F37D40D7D2
+:10F0D000C15997D0A32BB9FE6D4079B18D104F5B0C
+:10F0E0003A95EBDF1065E0C3F3C7ED08C7DCC766F0
+:10F0F0004C24A8AF9589C00F488C61F680F7F8259D
+:10F10000EC15974AE273F8AB085CCDA743747C2BEF
+:10F1100055F35F810EE7FADC386F5F7AFF41C70075
+:10F1200094FB05A54C2F3CE638887ABEE37DAAE720
+:10F1300005F68E10C5FB6CF805F4FEFB561CFFCAE5
+:10F140007502CA11CD6EA824B285AA3832DDDB6DF6
+:10F15000FE01C59FCF5E3DEE567A7DE5DD8EE1C0B6
+:10F16000BFAF807D80F2A1C1C1EC8318358E2E71B6
+:10F170007B970DF970EB5913B183DFB0DD86744ACC
+:10F18000F9F4FE71F43DDB83CC5EE838CBEDBDEDE8
+:10F190000EE4939D7F60EBE858E1607EC619AB0CEE
+:10F1A000F6F8D6153108E731524CC00CF32D67F351
+:10F1B0007771BCBECDF1BA9FEBAB37B8BEFA0DD8B4
+:10F1C00013A8BF983DB11BEC097ADDC9ED891DA0DC
+:10F1D000CFE8F5C5B3CFBF077C797E7B14DA9D639A
+:10F1E00048DA6658D776A715D76984F33C45CF0728
+:10F1F00073ABF47643F958BDDD70FDA8E1BA7659DA
+:10F2000062AAEEF9A9F1D7E8FA4B9D997A79649E42
+:10F21000A86BCB17F4764385F7063D3DC9617603AD
+:10F22000CA3BBDDF383BDC6F4C063C313F676BD7D8
+:10F230001D88C7ADC753062A6176C2360EE7ADC733
+:10F2400099FEDC16FA22468960477CCAC77DC6F162
+:10F250007186E3E33F46C8BF4B1F0CFCF20593BF2A
+:10F260007DD0B1F6BCF6DCA7FE5303C2F5FA4851D7
+:10F270004226D1DA7FE8786F0CF45F2E5F503A6D4A
+:10F280000D513C7F478C696FA38FAC31373C056DC6
+:10F2900055359367B2101C6966ECBFDA03F2B839D2
+:10F2A000A6E139E8DFD264736D8A073EFAFEAFA0AB
+:10F2B000BD9CB2828D5EFF1435C24F28AB39324CF3
+:10F2C00038FFB316DF700FE84DC137FF563A5EDDE9
+:10F2D00060F53C235DBC9ED80C4163F66DA087446D
+:10F2E000CEF77F1194D80C7A5FFE8580723A4A225D
+:10F2F000A8176CC41700FE21F5F27CE00F62A2FC97
+:10F3000043AF8D99CA50184F6422B9E83CC8DAF46B
+:10F310007D4270DF9F05BA2E0B6950611E5B3D95E3
+:10F3200030949F1F4D5746E078F34C9CFFC569848D
+:10F33000803CA3DBC176D6DDC4D5164B286B2BA64B
+:10F340002F687B3EF5F7E1FD26C732D453EFFDCEA3
+:10F35000E41723D84B3D705E6639130A8B8F18E98A
+:10F36000A783D3C5B6641FCA5FE3F3B900170AC702
+:10F37000AD1F4E1781BEB2EC0364B02BE806C51971
+:10F3800054BE6F3B79BDA326C273D767D5E4660C24
+:10F39000EE6D6705378B354EF4E745D8D716FA3B47
+:10F3A000ECEBE54E5300F07BDE694579D2D73EF2B7
+:10F3B00042FA38442ED80361FC46C80217F88B0283
+:10F3C0006917BEBA269CBEE4FBC3E9EBC58BE90B0B
+:10F3D000E1FC9DB7D210AECD02A32F95D217F4ABAE
+:10F3E000250D485FAA89F89AB390DEF0F9E566BB6F
+:10F3F000CB4625E4B28C147C4F474CF97B0109DFE6
+:10F40000973A13FDB96AEECF55A39C7FE32893F397
+:10F41000C67DED3C3A677808EC89D17387039F7706
+:10F42000800218068BCA9B27EBDA248076E0140250
+:10F43000212B80C03CB03F3BAED3DA5ED62E66E3D4
+:10F440006F79FED10D2AB46FE2FDEA6CD6AFB549F3
+:10F45000FEBC62685B4CD83E09E3E9FB1EF3C8CBF7
+:10F46000006F8FA6CBB7025DE680D142AF9F4D9073
+:10F470006F87F6B20C82FBFDDE04F95B304E6B6FDA
+:10F480001B2FDF19DEDED2E3A7B6733FF556B44B70
+:10F49000DFE89A89F6AC447C3780DE7923C8E251F4
+:10F4A0005B46F5EF071DE4F6FC01EEA7BE09F2E8A6
+:10F4B0002AD027CC4FDDCBFDD4DD5CAFECE47EEA77
+:10F4C0000EAE575EE57ED22BDC4F7A09FCD4ABC082
+:10F4D0000EA9E27112E6A7668D9E5C8A76844BF3D4
+:10F4E000534744F4532BBC7A7D33CDA3D73737A48D
+:10F4F000C519F48B5EDF4C8DD7EB9B52E73506FDCB
+:10F5000092A91B2F5FD0FBA945DD25BAF10567F451
+:10F510007E6AFE473375E39765488847EFF11B75B0
+:10F52000E3723A6B75E37AF1E6433C59D5279D6067
+:10F53000C76D1955C7F1C6EC050D6F1D97C0DB6F80
+:10F5400038DEF672BCEDE678DBC9F1B683DB03AFDB
+:10F5500072BCBDC2ED819738DEB672BC6DE1F1853B
+:10F56000831C6F0738DEDEE4FE6ED6E8DDE89F9D83
+:10F570003F4B38DE368A91F05696281AF0E030E09C
+:10F58000418FB712F370031E520C78B85AD72E3839
+:10F590009361C043BEAEED3D5E6280FFF506BBA148
+:10F5A00052D7AFE16D9A67BE81BEEA74E32E9BDF4E
+:10F5B0009CCCCEFB6BF96D1FB7E3F670BCED02BCC3
+:10F5C000619CC8C3E3115E1EF76576DCCB1C6FDB64
+:10F5D000785CA803F006F61DC75BF3A87368C79FA5
+:10F5E000BFA0E1ED6044BC5D29BF5DEBD6C785A639
+:10F5F000B8F471A1C9763DBF1513BD7D37E94B3D08
+:10F60000BF159ED5DB77133FD5F35B5E68A6AE4D85
+:10F61000ED8084CC6CD05337EA9ECB0ED6EAC6512F
+:10F620003F89F92D1EAEF7FD95A88F5AA631FD48EA
+:10F63000F910EDEF67BF4DED80F45E78BC68F09F88
+:10F640005EEC437F5F93C9F477C77BD508D76CD056
+:10F65000DF91F20B7C5C4EA60BAF363351A33370B7
+:10F66000997B86D1F5984731BBC71CB316820CF045
+:10F670001334E5F4DA49A2D347607E6A2FE5648645
+:10F68000E97DB3AB8180DD20DA1E5A00FB22A2C9DE
+:10F69000837AD7601F917A977C07DCBF6380A78D40
+:10F6A000C2E296CC585C879B6CB6809DD198294F5E
+:10F6B00002788A93193CB62451DF9DC2634B146BC8
+:10F6C000AB145ECFD0B6387001C2AF83C24B4C874B
+:10F6D000F9E3C9DD745D55995606877984E953F5D8
+:10F6E00039A65F7BF421351868FBD968D6BEF18551
+:10F6F0009FCE53137BF56F5DE64BA84FC73887D578
+:10F7000091F174DEF5EA20B033C7D2F5817C34394B
+:10F71000B62745B2BFFBB2C3568F97E7C17EBEC7BF
+:10F72000F5EB180A117346DFCF3F1BEDBB05F09BCD
+:10F7300005F0088B7BCDCC64766B15CC3318ED4B84
+:10F7400039DCBE24C14A6CB7A433FAFAF1DA99481D
+:10F750006F4E0A2F3116D6CFE037FF2E465F57BACD
+:10F760000F6DFDFDD0892FDC9E0EA393EF45A213F4
+:10F7700052EE71A3BFDE973DA7B2F53673FB51B3CE
+:10F78000936D899ADDECC7F558287BE40FC22B995D
+:10F7900042E13AC845305E53ED32F9FD14645160E0
+:10F7A000F083DC2915882B19669709C363B9142ED9
+:10F7B0007F8CF141EFF168837C1F64D0C3C374ED8B
+:10F7C000A2EE14839F7875BF7ABED439D1A09F264C
+:10F7D000EBC69725DE60F0632B0D7EAE5E4F9889F9
+:10F7E00059E5F83261DC421524730EDC27889FB09E
+:10F7F0007EF43B7BE0FC845C85FCCAFD1A23BF36AB
+:10F80000664A0867C1C5FC1A8D1FB4E735F859DD93
+:10F810000CAFEB7234FDE441BD630B7C93405C950F
+:10F82000DAD0F2E6307ADBD4687FAF7434213F69F6
+:10F8300024EF9552E4F91B5D78DDD8E8C6EB138D13
+:10F84000125E1F6F4CC371EB1B3DD87EB4D18BD7BA
+:10F85000471A65BCFF506319B6DB1B7DD85EDB58C9
+:10F8600085D7B64605EF8F322BAA9DEE6B542BF150
+:10F87000A8742BA3DBE9FBC2E096DA4AD71106F79E
+:10F8800064D5A56B8F5CEED68D4F6A9074FDC3EB8B
+:10F89000D374FD098A47D71E5AE5D58D1FEC9375A1
+:10F8A000EDB8B232DDF858D9A76BC778AA74E31D5A
+:10F8B000698AAE7F5751FEC0503F7CFC506320C820
+:10F8C000E0120C3238BD1E64F0E9C2EBE75CFE0EBC
+:10F8D0003207515E0CCA7251D2A1F8B2B3FC5A9CE5
+:10F8E000D923C486CD1F5746E74B0B5F2F9D4FE7AB
+:10F8F0009FF9915E623C41DD7D475A97EEB929A29E
+:10F90000B304F211870B448C7B1D2E888B01FBE521
+:10F910007E8B6B5A16A5C7434745CF26780E1E88A7
+:10F92000202F4F70BDE8186F47B950B14AD8242234
+:10F93000D1B2E76B3B5323C63D0FDD4BAA605F8E10
+:10F940005D2F494017150535715161FE5A45E0CFCD
+:10F95000A56EB8BF2A3D278ACE56D19A6CAD1BDB67
+:10F96000BB2F6D5CED2ABD7DD94BF77E3BEC638CE4
+:10F970007AAF1DE45B5BE2266CB7A5F59F27F98C97
+:10F98000DB619F723BEC348FC37CC4EDB093DCEF42
+:10F9900009713BEC036E871DE7F6F3316E877571D5
+:10F9A000BFE76D6E3F7772FBF908B7C3DAD29E9F4F
+:10F9B0008AF2F017021123F8A9DAF5969FEAEDB062
+:10F9C0006FFAF576D8D2F57A3B6C71BBDE0EAB6B75
+:10F9D000D5DB6135AADE0E5BB85C6F87DDD4A097FE
+:10F9E00087F3EB27EBDAF3147D9C6D6E95DE7ED604
+:10F9F000F033DBA7978B95657AFBB9AFFDBE12B8E4
+:10FA00000EF33F80C453617AAF279F0B7A85D245AE
+:10FA1000D605AA57300EEE6B86FCC9361842F56F34
+:10FA2000A129F816E47DC8DB2281B8D3AEF339E50D
+:10FA30001511E82F47D5D3CD82E3FAF8C68D77E9C3
+:10FA4000E13A6399DE2FB196E9E12A27EAFD924A6D
+:10FA5000A39EF1E9E1AA1285005D1AF58DC9B14CAA
+:10FA600002F97DA57AC74AA85E616D9DDEB1C29D8F
+:10FA7000145D3FEA9D1F64B17A831CBA0E30169A5A
+:10FA8000A2720F7828DC76BD6BC63A11BAC023A3E8
+:10FA9000A8FE2982DF29FC5EB5286A03E4D9785ED6
+:10FAA00084886776DF4EC75B87B3BC08F9D2FC1148
+:10FAB000CCAFD07F80AF1C42DB617A2E3BC8FAC34B
+:10FAC000D6ABEBF703CE06F7B71EF9C8A89CFFC963
+:10FAD000F5C4C49F06A137814CC07A83D0A0CB8ADD
+:10FAE000AF1AEF6705981D9495C8EC206FD24C9122
+:10FAF000E79F08843CBC2662C778E608E27F06E2FE
+:10FB00009CD1071CD369B319A64C003F49CFFFB362
+:10FB1000CAFBCFCF1BFDB0EBA45483DF768DC1AF02
+:10FB2000D3F3BF8D18EC971091C09E441C9874FDC0
+:10FB300008A777381D359D68990FFB7A2989E75703
+:10FB400038FD4CE4F82264F3EE1ADAEF758B04FC0E
+:10FB50000D1B51E326407D51B04186BC43AED7E634
+:10FB600042BC892B3C68979E61F8F1D27F803F2F81
+:10FB700009C317E0EFB81E7F3643FFEF393D5DBC88
+:10FB80002E4647FFB87519E8CA39E8B2EA588CF72B
+:10FB90008B83B21843D7B7D725601E756FB0215835
+:10FBA0004CDBE7DCAC6E684DE24C33AE97C803A685
+:10FBB000503C4CE5FBF5F2BC56472341BBE3C54640
+:10FBC0003B5E096910411EB5B8EF8803FDD831428C
+:10FBD000190EF5691D836357417E7E8B25363152A0
+:10FBE0005DCB4E4B2EEAD38E9D0966893E5F6C76C7
+:10FBF00099E1B9E2C45A11FCBD6BBB08DA05C589AD
+:10FC000004F3592F36060EB3F729588743F73119F5
+:10FC1000ECD35257CDE4987888CF52DB46023B377D
+:10FC200016FDD73D836D88379B6B69E9B7E8FE0EFB
+:10FC3000268844F052FC788827007A20D1E9F1C365
+:10FC4000746ECB4980733DFD0778D1F402E5F393E0
+:10FC5000E1F8C825616DCC2BE8DB23B3F5F891887A
+:10FC60008275162D5DACBE8C8422E7593EE4768306
+:10FC700016DF3FCEED86633CEE7698DB0D2D86F8E1
+:10FC8000CD5BDC6ED8C3ED867DDC6E789DDB0D6FC1
+:10FC900072BBE100B71B7AFC05A236415E711EB152
+:10FCA00087C05F3858C3E0EC5E25F8CB201FAEB4A8
+:10FCB000FB4AE87DDB2A0BCACF91896A13C4C76D62
+:10FCC00055EA14D8877B417B135C9B8ADA12E0FEED
+:10FCD0003CE5F471F0B3815EA6E5707EA7785867C5
+:10FCE00065705EBF38C6B312E85959528EE31219D7
+:10FCF000DCECF41FC03B61912A001DB8158B0EDEB1
+:10FD00003506F8CE837698FC88067AA4F09C9ECDC2
+:10FD1000EBCF32492683BB1A05708FAAE1704F8B57
+:10FD20008FC827EB39DC35B8EC2CBAD9A4D2A16F37
+:10FD300025B2BA89B70A6E361DA4EBEF9445CCBF45
+:10FD40007626F23A41FE5EE37CEF707B765D49FFFA
+:10FD5000F1BA437C5C4FBB9548B68161F394DC6F8C
+:10FD600091E8F35581FB92802FD60DD0F2C41EB4DA
+:10FD7000AFA78805BF4DA6EB0CF23A484D5ECE21E9
+:10FD80001C3686F7BDC5F7D9D77ADE2AB9C122D18C
+:10FD9000796705EE21F03E9BB9C11D5E5FDAC9D7D8
+:10FDA000B766C69D04F83238E26C3DFAF13E9B041A
+:10FDB00076F7C844CF6AA00377A262F936BD3F9DAB
+:10FDC000CA43C905CB6ADF190FE3E8338F13A09745
+:10FDD000AB37033DBC956447B9D3D77A2ED2237E87
+:10FDE00082F6485F7A84CA1FB4876CE59F1C07BF00
+:10FDF000B692347802F4B960966730F031A9B2A0B7
+:10FE00007E4EA3FFC2F36ADAB5D2A0BF1D5E4BBF20
+:10FE10007278E485C656F03BDE02FEC13C2889813B
+:10FE2000FA9C60F99D76804F4552CA2EC00F29B6C4
+:10FE300087465338AC29587D13C06B4DF952970053
+:10FE40007455988AFDC162FB69A8C8E92A5E9324AB
+:10FE500085C17BCD7DA448017827DDED5E42F79515
+:10FE600092F8C74685F24D9785F93DEF94FC3E31F7
+:10FE7000396C7C4676F1BF67435CC7CDE87C8C5516
+:10FE80004989541FACD179535134C6654ED6B07AE6
+:10FE9000057A7FF572FAA842F5559BA7978F1773DD
+:10FEA0007A8A1ADD5D0FE395FB6C12FA67E282969F
+:10FEB000E5B45D05F612D84F8F58902F357E4E6A07
+:10FEC000D0CB4DC5C0B75506BED6F8E9379AFCEC85
+:10FED000E5E318C06B540DE3276D7FC67DCDFB9223
+:10FEE000DA39718418FDBB7717A546333D1666DFF6
+:10FEF0004E40D92459E9FE66717A9AC5E98992E49F
+:10FF00004E58CFA17B52A701BED426EA07C0DA56CD
+:10FF1000587AEDDF14D82719E0A5FB9FB55C4C0794
+:10FF2000FF94DC65E9A5C714DDFBB05E604E781B6D
+:10FF3000E85595DF013B02C299F0D23F9D38BCB72E
+:10FF400099BEAF73581C69F2E07C1F31F928E17C3F
+:10FF5000870AC4015EE8FFEEE87448E193707AA571
+:10FF6000F38754D65F7D4F6A069A9BBCFDE18AC138
+:10FF70005041467CE596DEF1F0BF5233E27FF60A4F
+:10FF80006113C4FFC6889F9FDD4DC7CFAAB4799A7D
+:10FF9000E9FCB31FACB580DD5FA92A7BEBE8B84A6A
+:10FFA0004A177E17EE43C72747CCC402F31C9105BE
+:10FFB000D24EDBB366E9F9A67A85BE6DB4478EC62C
+:10FFC00028234CF4F94F041BD944AF3B372CDD08F0
+:10FFD000F37DFCA00DEB0A09BC2B07F400E1F1490D
+:10FFE00079E33DB4BF76BD8D405E641EB7F7E37222
+:10FFF00092715E9363013E5FD316837EF1E90D43F8
+:020000022000DC
+:10000000C703FE5B0735DC06F5D41FC72AD580D7AA
+:10001000DA35D798203ED21ADD3E05C67F6222AE81
+:100020004DE9B42D3D6481F57451FB00E2ADDA3A3F
+:100030006B5AC3F00FFBCA6171DCE926A26C8E60BB
+:10004000D73C9A23703D4B545BD8FA37E448787F0D
+:100050007ACAA09687E13D14FB2E0F870BEC7B0A32
+:100060008B8BB6267AAA07D3F6470271AD8C87AB85
+:10007000FC01F0A7FA031B7906D14F70BC75F8B0EC
+:10008000A7DBC2FCFF4CFEDE53B1ACFFA43BDA0F92
+:10009000FB3C29B1B6EA76FA919ECD4ADA9C18B6B5
+:1000A0001F61089C8260EB3B1A235953101F447A4E
+:1000B0009EAEABF691C710BF5B287C803FBB5C5205
+:1000C000CB4EBA8ED35459ABD0EF7E7C0AC0F3CE60
+:1000D0000C4AA80917C3A9316710AEE7F4FAE6186D
+:1000E000AC337111C53AA4171E35ED5BBF238C47A5
+:1000F0003DAF32F9C1F84F2061F29DE2777ADE0F11
+:100100002DB5B0DF28D20E7831ED59658775CEABAD
+:10011000B1607ECC497C65204F6B1E11B04D7FD6FF
+:1001200082BEA8E5FCD52A0DDA07747C12EC71F4C6
+:10013000F79ED80BF501355C7E552DD2D3E962B719
+:1001400059C72F3396EBF987EE53D7DE98C3EA3AB7
+:10015000BBBC1FC7837E6EA5DB06B87CD222F837F6
+:10016000A17CF58D08AFAF1B9363D2E2F092250C12
+:10017000FEB594FE6A416FD8497B09D83579A3A7AB
+:1001800002BD5B8F46E33A8DF0FD6787C3A924A9C2
+:100190007A305DCF294AC750FF73724333DA2FF0AC
+:1001A00023EAF8DAD502F4BD84AEF27117D2A7754E
+:1001B000C6B85E7AD1E053B33E791F8C73FF678C6B
+:1001C000449D2752E3CE5F0AF6640F1D19E0037BBE
+:1001D000366BEF49EDA533EC8F406765742CC38B0C
+:1001E0008AFC5253DA93D71BD15FFD32E23B9FE288
+:1001F000B5237D3EE4A13439B7AEE84DA483732E18
+:10020000E217995FFB36C8FD18BE3695C881BA78EB
+:10021000502654EFBAF01EFACB717CBFB1CB856388
+:10022000A599840C5A2E1E2BA537634B8301D0133E
+:100230003637D7BBDB737F3566089C6E2018A7194D
+:10024000105DEE09E06E5C09784EC1E24A00FBE702
+:100250004141A882B8FD00A2B7ABE20CF02059E6FC
+:100260008FC2EDF2682EEF974E4915D0DF29D3FBF0
+:10027000A766835DF4AB1C93E65FE055825F291CA3
+:100280005BA8FF06726A50A0BD1DE8B39ADAAD7E86
+:10029000DCBF07F33AD652813C2EF4C6AFFE51F1D3
+:1002A0008B8BE2603C7ED1571C4C8B0754B25BD4E5
+:1002B000DF51DC90F7AB74533F6700D85937BBD19F
+:1002C0006F729F46BBD4CAEDD2A8D18B5C2C7FC67F
+:1002D000F8478B0718E9CA185732F29FD12EFDCF85
+:1002E0001C6E3F5D4DAEBE92F88016C75F93C6FC94
+:1002F0009E3569B52BA17EED3CF77B5CAA09F138F0
+:1003000067968078D4ECB539DEB3B380FFB4FA8356
+:100310004BF93D6D063F24DAFBB42C47D09F8E5C31
+:1003200046478E02D63FC74ECCF6B0FC813397E9E4
+:10033000DF39540FDAE916A7F3734415449F9F1A67
+:100340009ACBE4AC76A53FC18C1C5DBDE0D0DCB09F
+:100350007CA88DE743EDBC5EB038BD7BF757705F7E
+:100360006675C036B9E6C96F533844CF8AF19890A4
+:100370007E95677E087EF22C07CADBF83409EB5EB7
+:10038000AB12ED1EA47D557E1BFC32B43325D892F2
+:100390008CF2762EE5DF80AB1F7FC7DE7FDCCCA939
+:1003A000F93B058CAE7AE24B3E26BF4DF41FD0D30D
+:1003B000EC2A3DBDCC55FAA79FDC5CFD39AE31A1DE
+:1003C0000B3BBF42BA60FCBB6E04CB479F2FA763B9
+:1003D000207FDB873DAEF9B74E0BF58B285E82F2AE
+:1003E0006EA4F7601AB184E3DB5720EAEA1B827936
+:1003F00024DA45FD9EA085243D48C70D90E75EEFB9
+:1004000002DFB7D81653837AC3AFB3EF0FD1794F5A
+:1004100038FB5E8791CEEF1BBD04E3FF0F5C4741C5
+:1004200046D77F1F249CB15E6FCB7CF0DB1E8036ED
+:10043000D6DFFDFBFC62684769ED6D3F92C3EA0DB4
+:10044000EEC90DFC482DA07E8D9DEA5B3A9F4322AC
+:1004500098A7226433CA6711E281209FC786C1171B
+:10046000FD063DBC8D76BC58C0E228A281EF8DEF21
+:10047000BD3D97F339C7535FFB363E477FAAAED6E3
+:10048000D3FF7772FBA997353EEF84FA89982BAF9B
+:100490003BA08214F3D3223179C05F262504DF27E5
+:1004A000B8185D8184013D686918E041B8D17614BF
+:1004B000E805BF438BABE2A2A300FF22E41303A82D
+:1004C000CFE95242422A8CD7EA0F14F295E3F2E5C3
+:1004D0001E95C7388F54C6F2CBEFCA2404EF1BF326
+:1004E000F87A5F0EF8EB47A99E95408FDFAC42BCCF
+:1004F000AC7B05C1FC80C3A5609BBE2AD4EC82B84E
+:10050000156B575318815EB6B9F5F5AF3B8B1E2FAF
+:10051000B6D2FE9652166F3DD418787715A5B596CB
+:10052000827C9497AB6060D87A83BBA2AC10875171
+:10053000D46FD9C16EFE708568856B70658D0A9B1E
+:100540007E3741DD2C4810775008F8F9D615CD5389
+:1005500080AFDEB5A89E414ECCAB629EB875A57A41
+:100560002BF83DB2545E964CF96853AB19CF199DE8
+:1005700028F97DA214C6879FE732BFE1E0CEA80725
+:10058000000E6B047B280AAE1665D37DF1F03EABFE
+:10059000A7892EF1DDA68793E03D6B16AFF1EC82C3
+:1005A000FE261B9C40256B36D8AB60DE35494BDC04
+:1005B0004BC2E6B50FB736C0FDE0B016AC6B51CA02
+:1005C0003CD6A858D8D7E731909F6D5D911907B4F4
+:1005D000D892601D5107E396FCE9B7B98077C984CA
+:1005E000795BABBBDD02FB1EE95654C88F9B72944E
+:1005F0000340AFF3969F98827573A5B1ABE13AF2D1
+:10060000C2EDAD00FF77793C2694508BF9DA964520
+:100610007576586F4542CACAF0784C4BC162FB18D8
+:10062000FA5C8ADB54B374C0C5F4D102F19709B007
+:100630002EBA9F7130EE8F8D0A1D174AB256453A79
+:10064000A7F509D747F6E6A529101769D96087F4F9
+:100650000C691194F5901F50939D11EBD833BC0C8D
+:10066000EED58A6B8A5542FC20BF7DBEF5D88FD46B
+:1006700051605732FCD9CDC46E09D37F19D9C567F3
+:1006800072C3FCE88BDE9BD082FAA04560FC9BE144
+:10069000FDE247502FFC7CB6AF1BE0B7A655590FC3
+:1006A000F022AA9D0C28EA9B4F42F7911184CAE3DD
+:1006B00096265B55A43AB4D022713AF009E5A0130E
+:1006C000034684C9E5957529101F09355D85DCDD74
+:1006D000337E83FD03C04368435A2CE8C350526DF8
+:1006E0004A0AD02DA74BE3FC5BB81DF062A62FDAB7
+:1006F0000B76E55896F79C91EB73629BB4BBC1CE29
+:10070000FD1AD06D2AACF71F48B7A8E73ED9FA1FEB
+:100710004857C47579F9481F0999319F5AF4178CC5
+:10072000F7B68DD3CE3FB1F8A066F7468DFE6815BB
+:10073000F8ADBE3C2DDF55B017FCF5E95A3EB59C2F
+:10074000C5075DF45FA4F8A0CF101F9C6E686BF620
+:10075000E60D5EBD7D9B28B5FB4A40EE1E103DE0D8
+:100760004F2411A65766940B7EB0B39B8AA2EDB8B6
+:10077000EE3C1EE7E4FED73CBEEE638D7602F92424
+:1007800093A36035AC7F7A3E5BBFA33E3D3B2081A7
+:100790007C67716E526F93306E02C84F203D7E9A17
+:1007A0000F26A1FB9957BF14EDFD5EF835B1F81087
+:1007B000D1FB133E62F01F16317B4CF3B7E61BEC06
+:1007C00003A3BD6F8C53F7E60536DB819EBAC7667F
+:1007D0001C4A91B05B0D68F9003A6EA1B773752899
+:1007E0004CFE7472FD70A4513EB68AEE7FB5EFC721
+:1007F00076A0D336B3DF0EFAA4ADECCE18A0BFB608
+:10080000056219F07DB0B10CC71D6CF4E1759597C8
+:10081000C9BB60B6BCC21B1677AE2C2B3EB62ABC39
+:10082000EE41BEEED8AAB0F5577867E8DA1A9D55C2
+:1008300088A4617304F9F2BC97D9ED66AAF7B1CE2A
+:1008400050FC85A7BFFA1BEAAF7687C3EF41AFDE46
+:100850009EBD7F6CC9C0FEEC166D7F1A5CB47D6BCB
+:10086000FD7DADF37B7FE33A9FF5EAEDB94BADD368
+:10087000B83E6DDD7D8DAF0061350CD659BA00EA0A
+:100880006283D94A07C8A3CA526135E44B8FF07816
+:10089000E29182183CE7BE378DF97BD1F58C6FA2CF
+:1008A0004B6760DEEF4AF17BA397D995B30A04BF8B
+:1008B0004C7F9DCACFDB1F4B63F9DCA6A29FFF16BE
+:1008C000F2D0EF145A58BC97C8D3A785E5B1D659D2
+:1008D000FD01C8271DEBA9D358B6FA6EDA8ED6E40F
+:1008E0004A953EEF306B963E7F5861C833441BE417
+:1008F000CA518D3E7228DC537BE1DE973FD1177DD4
+:1009000010F3D92CD04346F8DC66808FD17FA9D86C
+:100910006EE087CBF46336B566ED85BC9A4AEDC9C7
+:10092000D1803FE8A2CF45CBBFC634C8803C468FBC
+:10093000634267D6825EECA42A00F4CBBA9977AE04
+:1009400087F679AAF7012F7DBD47F3DF9ECF96BFCB
+:10095000F446A81FE89123601F4C80BC6064FBA094
+:1009600073D1E46911ED83997529D9B0AE197AFB79
+:10097000A07343D99399701FEC03FAD39957A7B387
+:100980000F4859E625E0C3E46ED4E8AC88757AB325
+:10099000B395C17961FB71A43590F07AC6EE1C79EC
+:1009A00008F4CFE07104ED7DD4FEDA638950BFA86E
+:1009B000BD2FD7CBEAF049591CD30FFC7A293C6AEA
+:1009C00075D4F75B64FCDE8B16F7D2C665E731FBA6
+:1009D000B03545AE877EE2CCB8C4BC4D5A9C232DC1
+:1009E0007D08AF1B96488F3FF41741C2FE08FE1EDC
+:1009F00081BC6474E2D93D2E3AE433AF929F970DE7
+:100A0000E728FC2AE4436CE502DA4BB6448276CD53
+:100A1000E5FA57973BAE158A03C0DFAA65F1F2E20B
+:100A20007433B6A3157113C8854917060A20377C9D
+:100A30008AF834AC375AFEFCD31F83BEA67A1FE275
+:100A4000303ED280E7AC9D161FC627DACAE9CCE952
+:100A50001087596949C1787AF2AF63DCF0367F2B91
+:100A6000C4CB6D1E761EAACAABAE86EF6654148E3A
+:100A70001608ED9FEE63F19B3910BF8179679DDD0C
+:100A800009F19FD95E26BFC06F03BD39B7EE3BE3C6
+:100A90001E95FE9AB88DBF352E0BE34912C60B0C7E
+:100AA000F1215BC1548C0F69752ABE0211CF779377
+:100AB00044277E87C218DF31C6738CF11E637CE742
+:100AC000EE3C5627ACD953DFCED3DB532BE00CC220
+:100AD00060B097A8A8A47CDD662149ED943E0F156F
+:100AE0007F42EEA2EB70FED00435E0749C21CE78FC
+:100AF00099722B48E5CA29D8C8EE372CE0DF2E9032
+:100B00006B30BE67A4FBC7B8FCBA2FCFA9ABEB080C
+:100B1000362EE7CF47A980E705A3ACFEA8E4DE792F
+:100B20002E973F9ECA911FCE637EC50F81CE894707
+:100B3000C1F30433725D3ABA250D83C9A9B0F88DAB
+:100B4000F1BDDA7AB4F9AF741D0F71785F2E9FACE6
+:100B50002BCAB75BE9FBCF511C8BA82FA9411D16EF
+:100B60009FD6E2E7DA73D59037C8043B52C0FC81C8
+:100B7000763F2C8E6D06BA8D4E54E448DF9B7A3B4F
+:100B8000AF276E8A794CED3D4450502ED4F17C8DC8
+:100B9000369F99B89B900F80B6B5758911E2E6C46F
+:100BA00063B75192A95D2B1288FF3889DC0EF1677B
+:100BB0006BAB05DB44ADDA0776FA22CE17D682A9F5
+:100BC000FB20AEA6F185316F631513A7C2B475ED96
+:100BD000FAFC95313F65B4A7B5F8BA99BE04D6754D
+:100BE0000EF0C1F6EB172F6FBF4FE37EBEA6FBD50D
+:100BF000E8AA3CF31637D49FB44429EB6BE8BAD487
+:100C000027ED18AF70C0DA002601FA0FE4E493DE96
+:100C10001FE379F67CF65D9A1681D5A3EC49F8635B
+:100C20007CF8F905533EA39B9FE549388EEACF0037
+:100C30009C972263E3912FB4FA934309CC0EAC281E
+:100C40005C1CB893B6FF8DD74B5E53F88C96EF1FA4
+:100C5000509C43B0F403E0B2CECAEAD20E7DC38CFE
+:100C6000F564443CB0EBCEF8DEBADD6B36EBFDCA82
+:100C70001BD2F4F6A0D1FEB31ADA43F38D75648A61
+:100C80001DEBC812781D195FBF914F7EDAC8F21AAA
+:100C90003FE775FFBFE0E72F7FC9EBF736F3F39728
+:100CA000CFF373B31ADCEFB728188F3E711DB5E987
+:100CB000627BE380EB8ABEEBC6F3FBF9CCCF9A22D2
+:100CC0003A77819EEA3D67D1FF77C22ACBF479B3A8
+:100CD000D93E7DDE6C6E953E6FF6FF32E5ECFC6C26
+:100CE000388751BF12BE5330639588F9CA752DE716
+:100CF00050CF9E2F406BFBA2F71CE6E730B4731C6D
+:100D0000DAFD6BF3D9F7911CBB122C508F3F635562
+:100D1000EC54889F1357C665D96F15107387FCCFA5
+:100D20004A9705BE0731239080F1D09AD62B9BE7D6
+:100D3000BED143304EDD13E757C7DE04F2F9B016DB
+:100D4000E727D7DC0471FEC33CCE5FF3F2B827C1BE
+:100D50003FFA599E3C17E0D1942757C1B586AF871B
+:100D6000B66FCC1FDCDBA63FAFC7EABF3F5193DFB6
+:100D70004F3C5D9C2C3444AA17B939BF27CEB5141B
+:100D8000E627F69E38D737613E626FC77376F7E67F
+:100D900033F9D47C8CD4C33CCD2F93FAE723D8DD30
+:100DA00077E50BDA7CDFC2E7DD9A7EF3DDC9E6D7B3
+:100DB000CF27DA624780DF7F82D79719E7BB37DF1B
+:100DC0008AE3E87CDFC3F9127BD6776FF8FA7ACF33
+:100DD000CFB86280691DD58AA98BD2136911B1EE93
+:100DE000C4D1E19A067549646A2AD6B11C2EADFCBD
+:100DF000A7384F73B8F4857FC9F334DBF2932FEB38
+:100E00003C8D63265122C535029C2E7715640E0C4D
+:100E1000F58327EBF2FD41B0337ADA668540DECF09
+:100E2000BAFC20DEBF3FCA551DD1BEE0F2ADA574AD
+:100E3000910F52426B92A68AE1F6CBD92CE5CDFCFC
+:100E400008E713CF8DEADE0DAA6966A96016E2D124
+:100E5000DEF608547E66AD9821BA2542BC0D0F4ED1
+:100E60001E4AFB672552FF2E6CDFF9F5BFDE4DD918
+:100E70009514941E6E8EA7E376E4286F03FD16B9D1
+:100E8000A53DD09EE54BC7BAF7FB6309DA79274643
+:100E90005BFD9B922F5EF7EF7AE5F24AF315C8E50A
+:100EA00096467DFE7B4DD29895B0FE3125240412E6
+:100EB00036C57DB618F27F19D9CAEF605D296E225A
+:100EC000DBC6E37D9984E56F8CF30E98C8F0342679
+:100ED00094F80388271FD2FCFDA22BF6F7FF180E0B
+:100EE0006FE3F584E6EFAF8EECEF9F581417391FD0
+:100EF000D052570BF98013ABF5FEFE890DEE6A3820
+:100F0000E77782FBFB27A6507F7F6CDFF9006D9FA0
+:100F1000540E3927EAF201DC6EE771EDD9D9F2C03F
+:100F200089D9E8CFBBE0DA9829C7E278D575139E56
+:100F3000472691CFC992275C32F839DAB9F65CAF0F
+:100F4000320C9ED7CECB8E01D13608F2A2AEDB2278
+:100F5000D1F368BEBEBF3E4FDA93C734E139EACB66
+:100F60008CD35FEE38C9BB99D5E398599D61544243
+:100F7000891BF253E7C7DA51BFB7C2FFC2F46A6AEE
+:100F8000BE3271E2E0F0790CDF57952EEFBD5A9D2D
+:100F90003EE82BD02F9D849481BC7920B601E31EBE
+:100FA000D771B819AFE513395E892B1EE0999AEF16
+:100FB000BB01F0415EDC2CE17760F9FDBEEAFB8D00
+:100FC000EB78D6EA7B1FCFD7978812ABCB23C81715
+:100FD00057A5B9504F6BF6D7D2894C6EDA48689452
+:100FE00095EEB359DEEDCCA4E33E7CC29C0E8F3D62
+:100FF00017432CB06E5F1A9573741F256E65647F5E
+:10100000F211BE4864F2C2352098DC788D635755E2
+:1010100080FB17F1E313DD83C11E7FEE49969FBA73
+:10102000EAC945F6DAB0F99F98C8E566225B7FB554
+:101030002CF8A56458CF59CC43CD904C1E9940DE76
+:10104000F8FCD1B91027A4F6DB686C9FC376503248
+:1010500065425EFB43F7174761FC55F72E1E82F48D
+:10106000CFE1B17045E6B368E7E728DF05FC070B81
+:10107000CEC5A48E453B7E3DD0FF4281F822D909E2
+:101080000F71BC5D2F37DC087476BD6C23706E2D3C
+:10109000586C43B83F572848E0B75600CD433CE76B
+:1010A0000933C69B293C9641FF018F03BF1B5D227C
+:1010B000FFDA0CED3F8E13C8D07EF4F115C3B5E016
+:1010C000DC60E0C70F81FE22AC7F295FBFC64F14F2
+:1010D000EE25B82E99D58BF44557DD79F2934097DC
+:1010E000AD294A3D7E17D135F3B2BE8B58F1533F3F
+:1010F000D6EED97ED2308C44A8FF3AC4F9C478FF2A
+:101100009713997D770BE78FAB9EEC3E701DF0F542
+:101110000A8B0BF0FAB33CDF66584F8FDFF57796FA
+:101120002353C40588BF60395D3B7EC781C4407BC3
+:10113000FA2833E24F2DE1DFF9B89BB89A63F12921
+:101140006CDB5708C8670E677B1518CDE6BC86A315
+:10115000B3E1B96211CFF5879D73E9B78E2CC4CF87
+:101160009FB5C0F9336ACB075789DA77B7884065EE
+:101170005BB0D4CCEDFBCF9E94E9AFCFF2FACC9329
+:10118000AF5A36421DCB51136BBFFDAA65C44AFA54
+:101190009ED008B68EB607054F9304D7A7D743FE57
+:1011A000B26EB9E029A3EDEAC03D5D10E25AF288C3
+:1011B0008D80ABF0F10F974E85FD9C7313FCBEEC58
+:1011C000DC04C6374A90F84DC9BDFEED0749C4AFEF
+:1011D000E54BE11C9D97EB9987E01C1B5DF7B5EA99
+:1011E000B7D4EF40DE94FABD10571BE461F9CCE8A8
+:1011F000A0D9E327E0EFB2FAC8961F08E421984788
+:101200005CDB0CFEB98DD7EB46CB35E83F0EA2F484
+:101210002981060D9975E7D8EA8882F41B5746396B
+:10122000231DAE7AFF38EB12E7D9E6DE343816F824
+:10123000E52F13F5E732FA8AAF6B57F8DE0DE0A71A
+:1012400083E757B751BB1DF6FB32B5DBE1BA9DDA38
+:10125000ED701FBE530D5738CF06D75DD46E872B68
+:101260009C67832B9C67832B9C6783E7E03C1B5C1C
+:10127000E13C1B9E3F2C540303013EC5D104F243C5
+:101280002D1646676A9215FD8D4021C1FC7D30C93F
+:10129000BA6925C4EB0486273596F50763949BB19C
+:1012A0009D3C96E577CD9E11708E7095305602FB71
+:1012B000A9D5AA60FDF289956602F5CBA169C2FBAA
+:1012C00090772182C92352FB66C757B721FC17CB01
+:1012D000C40475E92BE1BBA1208F3F259B587C2ED0
+:1012E00028C2F7E59A6308A7C73ABF4C65F669417B
+:1012F0006B1F52C09F9D043101A4DF030AF42F5ECF
+:101300002EF076D02F8F82BA06DEAF1E7A0AFCD777
+:10131000558676A7497B3EE52998EF68CFFB465472
+:10132000CB40EF295A7FE242689F8AD29EFF7C2100
+:101330009EE7D2D6A37E8AF38592B4F1A9D5D01FB9
+:10134000EAA9935B82EB0D0D66E3FF6D57E7D3E0EF
+:101350002FFFBDE76B56548CE3ABB3087926F662DA
+:10136000FAFA7892A88F87CA822E1EAAC5DF4D8E00
+:101370000543F1FCD90336948BA79208FA217DC569
+:1013800045C3E2F51817FDD524AD9ED910FF240AF8
+:101390008179AB201EE8C1B72AE1E7D388D040A00D
+:1013A0004EDD772646023BD29A1816BFE332A0BF25
+:1013B000786173038B0F06150B51937BEBFAAD0528
+:1013C000BCAE9FC70BB53A066BC1A3BABC81315EF8
+:1013D00048C465988FF62DD2C7032B942B8B172EFC
+:1013E0002001CB50A07F59F080FFBEC0A57C300407
+:1013F000EDFDABD9F719A5D7316EAA9D1B833BF044
+:10140000DDA92ABEE7B65B4FBC3F848EF3AF8C925A
+:10141000E030FEFC65C5F87C1EDD21C4B76A0AF128
+:10142000F02DC9FED4F3BA04F2D46DF23033CD7787
+:101430006F02D80B8B62316F72D35DE91FC03C8B9A
+:1014400055073E47ED4A4EEF2F6D047A1221701971
+:10145000D6CE1AA1D15BD546E0AF49715A3BE629F9
+:10146000E08762ABF6BC17DBF3148DFFAE790AF4AC
+:10147000C7D1128DBE0F54C3F3B3537BE643FA9E1C
+:10148000E4D0DAD317427F6BCF7C4B36C27CEFC0FF
+:10149000978DB03DF529E0E7E2195C5FA91F6D84E7
+:1014A000F95B1668F34FF0C3771EE79BB4E7A3FC24
+:1014B000B07E85686D2ACF68FB3DCEFFC70A5EA867
+:1014C000067EB9B1A7FF05DCEF02DE3E5E50F714E1
+:1014D000F4FFCBEFEF7FF87DC6F64D2438656856F4
+:1014E0002F5F18E5D56F8B981CF1D6FF1AC8952C85
+:1014F00068781ABFEF06F10096CF4A98E503796144
+:10150000173D943388CFEDC238A7719E9B0B595C71
+:10151000FD4C813E2FD662C88BF9787EAAAF798EBA
+:1015200014B1795A4B22FBB119D9257F2A80FA01CF
+:10153000725684F95C1460F07DB2964CE5FFC37D71
+:10154000CABAF8DD4D2AB23C709FFAC52AD899D3A1
+:101550002938210FDB54F438C6E9437916DDF7400A
+:10156000B43CE73AAB8CF2F1635ED731BF449E7274
+:101570000FF0FF30916CC23A0F27E61BCCC3AD4F82
+:10158000A35CE7794FED7B1CD32F712EC2782EA57B
+:101590009BC3FF5C419B05E4B34AD429A55928AFFE
+:1015A00083506F6C72ACC53CB0ADC88279042DFF1E
+:1015B000ACF0EF7F6B79DF49170632FD9EA6C5754B
+:1015C000FBCFFF2ACB77FAD03E68178949B8381F7E
+:1015D000BCD8A726413DCBF4D2183C2F5055FB0672
+:1015E000CE7F7804C1EF0447CF6AC0F341666A1F1B
+:1015F000CA00179E2FD6EA63465EB81DCF8DD66906
+:10160000F5E662F941B0536D8F513F0BD997C14553
+:10161000CB17CF30C8FBC50595A86709B5E347C709
+:10162000C27BFA3FF7FCF0A458A49B8FDA593D7FA8
+:101630006121CF97F03CF0FD1616E76B4DD1D3D565
+:10164000CF27317F65FD244677BB8A7E5E85F633E2
+:101650003179202F469E60DF8583180B9EB7327E3E
+:101660008F396D0EDA754F8CA45BA4B6B679F97B11
+:10167000185714D6B3E73E1D4F1AC06F319B599BC4
+:101680005E54C8FFE77A9599855097B5FC031CDF37
+:10169000ACB27AEFBEE237D5859ABE67F19BF9EE20
+:1016A0007D5D70AEEC6F8EE318CEBDFA24565FD22E
+:1016B000562069F946FC2E21255C0BD88BA9F9BE72
+:1016C000FA428C6F6D96601D9ABCD957741BCA275D
+:1016D0002247CE4B6B7CDF62C84BFBDCECF923AFBF
+:1016E000DD530D7F17A2AF3CC4B3C53D7983E5F848
+:1016F000FE782D6F20DF03ED5E3D4A37E4D5E9D15A
+:1017000085F5FF0BF4688FDDAE76A11DFB755B3FA1
+:10171000A5AB1710AF652C7EF6755BBF3C517E13F1
+:10172000F8F9BFFB3DE9137D5D00A7FB04B9CAC909
+:10173000927B1E419FE7FBA0B09F3CDFA5E20FFF1D
+:10174000176FE83FDE602FD2E7E1FF59E20D0E3858
+:10175000433518F928B108F8A880F1D1BFBADCA345
+:10176000FBCD2F827CBAB0D91F9DFAF7F7F753F360
+:1017700095B222D4838A6917A59FFB8AEDCC9E0976
+:1017800030F8F6C633E8FABDBA78C653F5FF0DF166
+:101790000CBADF2AC46F297FFFD71F7F77207C65B3
+:1017A000664FFC0BD2E703B8BFCD6C7FFF80F76FAD
+:1017B000447AF905A3975EF8303B290C3E0BEBFF0A
+:1017C00031F0791EE1B38DADEF6B80CFD7119E1E46
+:1017D000B6DE4BF9D7270A044D2E1FC27D66313A7B
+:1017E00038C5ED6BEA774F1E2AF5FADD4FE5C86F75
+:1017F00015313BF76891AEFE537E1BEEF7E3171FE2
+:1018000083FE087E7108EE7FDDFCE2D8429647EC4D
+:10181000CDBBF8D9776F49D5F5DFA0EFF980C21BB2
+:10182000E26D6DCB45B42FCE2712FC1E80666F840F
+:101830006259FDDEC5E7C14A099C47B4E5B1EF8CAA
+:1018400068DF07308B0B0606A48BE17A7080628517
+:101850003AAF25727A0B9C6F9DBCF6733C77659509
+:101860006DF8773547BA3D96BBC08FA67EEEB510B2
+:101870004FAD77E1393AED5C9976FE634960DE3E23
+:101880003867DB46E92181BEA7A2D472327CFF46CD
+:101890007BC36C681BFFAE69C2247DDE83C21FED73
+:1018A0009FF3EB597D5C9B99EC82FA8F3A55F437A4
+:1018B000D1F6336B05FC1EE7220A27F0F727B7277E
+:1018C000633DB935917DEF4CFBBBA7940EDAF3C0B5
+:1018D000FE3B2A12FC3B76FC3C99F69DEFA869671B
+:1018E000F17B5BA7E8FEE1FB3DDA772666703AD133
+:1018F000E019D5148770394FE142002EFCBCCDF4BD
+:10190000E52C1FDCB2607110C8BBBAE0F35591EA58
+:1019100052E6B8F5DF4B37C6338CDF1B3713DF4099
+:101920003857575150AC82BD6AE3F59AD144C6EF9F
+:101930005A9C5AFB63F65D8B528BEE3B22C6F746F0
+:101940001BE8D466883B18E9D4889772035E9E3101
+:10195000B3EF0CB6748A1E95DE6E7964512B9CCB66
+:10196000571F31B1BA7922E3779F5AA8C58BE7CFC9
+:10197000E962215E3F97C353C30B210D16E0B70503
+:10198000DA397453C36A384F3A8F9F43BF916CC69C
+:10199000730637810541DFBB1042E4227C5746B213
+:1019A00032E7C045601D7555EC3B1926D803E409A4
+:1019B0001E3121BFB6B877E1DFFD0A0CB3C49E4EDD
+:1019C00063FE44247BB627AE4021713A2C8EFF7F04
+:1019D000F1ABBF2D7E35B17010AB9B880AB8F29287
+:1019E000D9F726A09E6962A1C4CE2758941178DE4B
+:1019F00061C3272AD08176DE81FEAC18A2FF6EC2B9
+:101A0000C649FDF87F258584D54727879240AE7D5E
+:101A1000D0475DE5E1E29EBACAE72661FE9DDABFE6
+:101A20005920F798FD3B23D7F7B3496817B373CE16
+:101A30005A1CE933AFF24B185F087F3F270BCFE703
+:101A4000F8E1FC4E8553D82B48BDEF27C63AF6FF88
+:101A5000A579AB7BB8DF168C22F81DA46032A97A79
+:101A60003E023E9E29617644303D32BEB47E6A67B6
+:101A70001C9FC4FDA1018C28CE58F5F18193809F55
+:101A80003EFF0E1DC7E3E829F2478877DE7E385710
+:101A90002132D4F72ABEF701AFA7555102BD420249
+:101AA0000A7ECF6FFAF74557A4BFA7F8CF7EFD2F68
+:101AB000E87FAE8400800000000000001F8B08005B
+:101AC00000000000000BED7D0D7854D5B5E83E73A5
+:101AD000CEFC24998409061C24E849001B6DC0E152
+:101AE000279000813393842490C0F0A741221E08E0
+:101AF000D0DC5EB44111634B9B0381102222BE8B6C
+:101B0000AFBCFEE824185AEFB37DD4CB6745D48E22
+:101B1000012D5AD4E0851A2BA54110B1CF7E8F5EDE
+:101B2000E5B5CFE7FB7C6BAD7DF6CC39930920C6DC
+:101B30005EFADD3B7E7E877DF6DFDA6BAFFFBDF6BA
+:101B4000492D8B3AAFCD628C6952A0131EB53EFD74
+:101B5000E4502CB39B59E74478A88723F224C65657
+:101B6000B2D84F7540B986FEC558DB5DA77E3F14DD
+:101B7000DA4536A6A86C3A634B5607A97F11F332B3
+:101B8000199E6DD372181BC258C1B9C06115CABA6B
+:101B9000DF11906898F0778741BFF08A4CB50DC689
+:101BA00059560CAF0A183BE984E714F8DF98B64C95
+:101BB000CB87FE58BE8E3A680CCA4B065BCAD9D09A
+:101BC000F4186F5FA8FD35628C82F199D9DF6CFF44
+:101BD000AEC4DB9F0F66470C2F63B79BF550D6B1A1
+:101BE0002CFA33969E1354A07FBD24CAED9A629DB1
+:101BF000EFDA766D1A63679CF6F16BCDF16669AE2C
+:101C0000761C2F1C9BDFD5AE41F97402FC77305E49
+:101C1000BE557350FB95B1F60E5AEF594994C7EA79
+:101C2000583EEE12FDF39769B0DEED39BC3E1C1A4A
+:101C30001B31B2AF3E78BEEAF1BF303CD354A2AB09
+:101C4000C2FA5F945C0BFFAC6D6897752FD259F8A0
+:101C5000F70CE8D17844523BA14F21DB2B3399C0DC
+:101C600076C94097533489B5C15CEB4212F50F7BBE
+:101C70001D7C1EA328A2019D2D992EE8745904E70E
+:101C8000ED8FEEFEF4D29AC70CEB3A8D354B6D70AA
+:101C90001B636D702FEA82F6505E72F73FF811CE2B
+:101CA00025B9627D2511A4BF964CD1EFC38BCE7BA5
+:101CB000EAA56AA2F725B179E653FB25A962BCDB48
+:101CC000A91CC7E79D767C1A372EC3F9045CA1D006
+:101CD0009D84CFB02FB219F93DEC670103F0797BF9
+:101CE000FD0659CFB7F09151A5121FF963E5889D04
+:101CF0008F0A888F061AAE9153C23FD440CEB0BC33
+:101D0000BD6A78CC57B16E9093B86E43A2750B3A0A
+:101D1000AAF559E8DD03EB564539B0ACDE3B10F3CC
+:101D20007697D1BC1F01BE599C9F98919BC03F974D
+:101D3000375EB377B90BE15EA5495A04DA7F8EBFEF
+:101D400019F1E7E9699CDE019F2F6BF0648580CF74
+:101D5000747CCF488EEF9B107E95F0ACEA8E2E807F
+:101D6000CBA579581BE060DEE4F06FA83DDBE147CE
+:101D7000FC0300D4BEE5285390CF80B7028EA95053
+:101D800076B29ABD49E6FD69C841F3363356B117BC
+:101D9000E09BB8D1B72AEC8DD7E79671B8547CC2D6
+:101DA000B8C7D37BEF1802F3F732E6DB08E3371B43
+:101DB000C0BCF07CBF5E8A48B0E6F7B3C3738AA0AC
+:101DC000DC9DE3086C84E9BB1F708F580BED7B72C0
+:101DD000BC0184AE277347BA0FC67F3F209BF8BA79
+:101DE000E73DE4EBE3E9317E3250BF749BF83DA759
+:101DF000853A908FDF5179F967A56BDF43FE6279F1
+:101E0000CCC786021EB007F0AA236D9AC70DF3BA9D
+:101E1000668238C1BE3EA6BBA0DE8DF5B0C4798F08
+:101E2000EE7E74018E61D4BC32CAA2475D4C317A19
+:101E30003D34AFF2395790CC39293EAE6B67F3CBC6
+:101E4000CDA88FFD320B216FF9797B3FEBDDF0B927
+:101E500003C787721E43127CE97358BF6496F1F77B
+:101E6000392CD1CBC2153908571E0BA0BE9DA73BFC
+:101E7000CFC4EAF9639B32C98413E191D75714C1E7
+:101E800033B5DEDE6E761E943DF1F2AC9D7521C455
+:101E9000FB2C0DBA8D63ECC8CEBA681DC079A4D0F6
+:101EA000ED9300D3AE6CC5D67E36DBBB09F10E7662
+:101EB000C52119F0B2D49CAFD937EFF70CFAADCAEF
+:101EC0008312ACFFF87782E90559C86F72C061B61A
+:101ED00071087C306AE77470391D90A07DF37362DD
+:101EE000DFB40EE403394DB295832E513FA903F9B7
+:101EF000E2784CAE8E598EE5452305DF0CED403D72
+:101F000039234D94072D47BEED559CA63CBBBE031F
+:101F1000E559AB18CFD8457CFD3613F5691D484708
+:101F2000E198FC9BDB8EE55B7D263CC60F491E36A7
+:101F30006B5C9F4C7DE9D55EE30ADA037F16059161
+:101F40000FC35CDE25D64F391669CE30EDBAD16AA3
+:101F50005F7EDB1694898FC2DA9F65DCBFD206C034
+:101F600019EC5F498D74AC00E953612390EF5B9AE3
+:101F700080F74743F9608A4B4D47B9EE9BA925E1AD
+:101F8000DF57830E1AAF2AE8CD3AFB75683F814DC3
+:101F900040BA6B696A14FD0DDC5F7D942B9292D37D
+:101FA000FF38A74AB81CE8967C0BB97E9619EAE779
+:101FB000E02323BD452CDEEEC5122E0F5A26688B7A
+:101FC00083F09C03E297C11E6E98FE837008E63989
+:101FD00053E40CB889CFB4B790CFE69B34F4B04B40
+:101FE000630FA0DC2872FB36A2EC96F39D8D505651
+:101FF0008603BF62B982D3B70EFF7D9E8BE32A7141
+:10200000FA0738E635DAF9416116FA86FAD5C1746D
+:10201000BEFE9BD9CDB8FE079DBEA528C75A737DCD
+:10202000775BE5D9FE122EC79E36D7DB35FD9F6B59
+:10203000103F1F334700E5C79ED430C9B353198CF6
+:1020400075A0CED798EA1B8A7CCDD721E5DDCAB032
+:10205000FD8F6E80250C03381ADFED2E9D00EF7783
+:10206000F17EE7C6B20686EF155E8687618CC37681
+:1020700027A9DDD6602ECDCF1E0B783C48FBD01CA7
+:10208000F7DBCBF63AF1E9487B7E849E647FC4930C
+:10209000AD767E14C303F21268425CB7C474C7E71E
+:1020A000B87E53FE039D6E273AADE17A64CAB9F358
+:1020B000367A2B0DAAD42E91EEA0DFA3D46FA1E81F
+:1020C000C79CBAC55EDF168C443628A48F7E48EDC7
+:1020D000BCA08FB26CFAE8C7F43E411F4DAAD41ED3
+:1020E0000F16C4CBD07F3795FBF6EF0C26D167D007
+:1020F000FEA734AE47277CCD9BAC3D89E589D70B45
+:1021000079020D0B417E5C23CAE977D64FB3CA9F93
+:10211000C2C751DE2CD625B3FEEB8F237F1F0F09DC
+:1021200079736429CA93983C62358FDBE4119B7301
+:1021300027D6C7E40F5BF5188E17933F6CE6E328AC
+:102140003F82F3845E3BF3188EDF522BC6BF25120D
+:1021500044BBC421FAA744900F7526CA763BF27798
+:10216000D3FE65A9D56F62EC5F1ED32C7EC689694C
+:10217000758F931E3486B0D3820F72FBF2BB90032F
+:10218000827E847D78EAE093BA01ED5654686F59F7
+:10219000F7256667F672BB276E5F9EE7F6F7C0DB32
+:1021A0008FA769FE7C4E6F5FC1F8FFCB3ABEB0A728
+:1021B000E0FDBF59DF5F6DFE1CC0E70A21BD4FE4A3
+:1021C000F05D41FF8C10AE2FC0F5D4DF00DE6C9ABD
+:1021D000CFF403AE427C064243AE6AF84A09BE2AF7
+:1021E000BEDF2F6A313A2D4F4E07974DFF73695F5F
+:1021F0004AF9BA2DE3CEA7F755822FD4A4FE3AB4FC
+:10220000BBCDDE2ED6FF7682CB1CF722FDEFB4B716
+:102210008BF55F6EA5CF01E0F3D5D6FDFD0AE4484E
+:10222000238D3F8A8FBF328EC7EF58DFFF67DCEC0C
+:102230009274DE4EFBDEC0E9E932ECED9F60FBAD4F
+:10224000D25E3D83E24486C0FB3F23DEE17DAF0BDF
+:10225000DEBF65EEC79345E19FE17B2CFAC75BFCCF
+:10226000136309AD2FEE9FC040F9567DAFB75BF504
+:10227000FDA1505D3BC22B97F0F6FBBBDE5C86EB0D
+:102280004F2C835D7280D6930576C918B24B9EC7DA
+:10229000F2A5C605F8BBA8DFB39C6E92D4BF42740A
+:1022A000F514AF6F75713BF6EDDA8FC98ED3D6A8F2
+:1022B0000EB4E3845E3F1AE27E00D82315116F5FEF
+:1022C000BBF1684812783B4AE3EEE5F83F1696D337
+:1022D000D1DE8CD92DEC55F283E276D55DEDB88F49
+:1022E00071BBAA81CAD3CD7D3E13BA779909EF0994
+:1022F0008E07733D976EFF1EC1E1E7ED93D49FA556
+:10230000F1B2399CCC7BF80CFAAD44AFFC37CA0172
+:10231000E5556621E85C549C05764BD74E4945321D
+:1023200059B94BECF3FA769BDF68F2E162938E9534
+:1023300092E665185F58FC89E0FF437CFD313FB5AC
+:1023400099E07FC78C4F3C8CED397C9F12FC2A872B
+:10235000EF2B18DF55427619C74F0D339C689789CC
+:10236000F382C4FDCD287188FD4D2F213B99C355C3
+:10237000A34B64BF87579C7222BD2F3DC6B464F443
+:1023800031A4C425E24F43A8BFD7F46F033C2E9479
+:10239000D87E78492C5E359CE0F4F1F936148547F7
+:1023A00060FF69FAD192A17C6B3C688F864BA5488F
+:1023B0005B0EFA37DEB25228CF73B05EF2FB18DB49
+:1023C0008C715FF7F30A6B0B506B55B1C475804B82
+:1023D0007F8B7EE422739FE7B1587CC581F11A4B55
+:1023E000FC86FC4077C9FD793B558ABB50DCC6E5CD
+:1023F00097C9AF083EB482E223A9856E9F1BE7917F
+:10240000B3C9CF75FDD08C172DE4FEA503FE433B69
+:102410003AB59191FF36679B1451A1DEADD9E32FF8
+:1024200075EBCF37937FB782F934F01395427BBDBC
+:102430002BC17F6D99A087104F6777D539101FC1C9
+:102440004AEE879DDD35D28BFC97E8479F453F9A42
+:10245000A4541F3FDA7800E36B163F7AED00FAD1FF
+:102460008B4AC08F465964FAD1238BC2B7113D28DD
+:102470001AC9B7AEE953E693BFBC4D666E687F7A62
+:10248000E7C4370AA16C6C5302186E78DFA92DC51A
+:102490007A03FC69F97ADA2686F1ADB926FCA78BB6
+:1024A000CE9722FCDABDD70790DE4F3FE4263C9F53
+:1024B0005E99194983F132B6FD65530AF47F2532DE
+:1024C0001C836C31FF3AD10F672C6220DD9C6623A0
+:1024D000581BEE83E26338AED290113002717F7BDD
+:1024E0006E9ECFC0F1F4481AC37D8FBECAA4B379E3
+:1024F0008C8E1C908EE731D58985054C7322FE1792
+:10250000319DCAB701BF492371BE3C83E800F80E74
+:10251000E3774D13F4EF10BDFF88D307DBAEB4E3D0
+:1025200079C569E39174E4B33DA9F6788378B698E8
+:10253000FCE9413F7FCC80FAF90F5AE5C465C895A4
+:1025400047F87E727E7595301A07F4643DF279B7CC
+:102550001907DE9EC9E3277BCC3849E213183E0BEE
+:10256000FB7F513D01FAB29DE08DFBF11D08CF6567
+:10257000E8CB9F12DCFBF83A7721DC5CFEFCF7121B
+:102580006E07A819144F01513C89EF2FFE3E95F4B8
+:102590005FE07CDA5312ED578ACA480EB95938CA3F
+:1025A0008989E3117EEB87DAFB3D7BB17E6B827C10
+:1025B000FE3F16EA2FE0FCC5E78142A19DBB8AC71A
+:1025C000C1E77AA5972535DEEE38C6A192ECF779FA
+:1025D000538E42B3A803EC958733600FF2717F02EC
+:1025E00083505EBFDDA49D441BEE7853053D7B9474
+:1025F00006921F3DBBE4C806E8FA4613EB2E1DDD2C
+:1026000077DC9ADAE0C933167934B7EC090F08455C
+:10261000D69CD77158C278BDE656DDD0BF3B3DBCD5
+:102620001DE3F5C651997502BCB72EAC3C79C622A4
+:102630001F12C785F998012CFB61894C701F0CBAD9
+:10264000A333308E60481194072B8C534E8C572E39
+:102650006D5CC674D82757E12905EDC29AA08FDAC0
+:10266000CF2D94996181EBF149DA7B8867A08B3398
+:10267000B4BF81981DF53E96834E2DC3971F8F439F
+:102680008A7381174B9E22FBB83B93D1FC613F8B31
+:102690006C80F94BB465AE5E3C67F187296E7AB207
+:1026A00044A57957EE6C277852A7FD99E001DB39F4
+:1026B000EA18DC17DF820F8E9A786F31F1DE1F9EE9
+:1026C00095521ECF13E5B9654A3AE2F92D45A57337
+:1026D0008EFEF87B7EA97D7FDCFE0A5BB959BBD7F5
+:1026E00081F47476A71CC17D82E7EBB86F9FC0BEF2
+:1026F000B19CF838DDE9ACC6AA9FC5FECC29B5EF80
+:10270000CFD26D7C7F966E0B125E969656BA86F18E
+:1027100073B5BD40DB4C2F5CC6102F2EED9482723A
+:10272000ACBFFD027E1B568AFC6BDA8F57103FCF81
+:1027300029B5D8B55F757C1FE6BBA534899DFDB76B
+:102740003A5F10F4740CE56A7E5CAEDE56CAE5684A
+:10275000E253C8558B3D49714D0B1CCBEBAF000EBE
+:10276000C127C8A728374A7648CEDE7CDC7FE0D771
+:1027700031689F7DB819F35156F919D14356A94ACA
+:1027800074ED9A36CF85F278E5AE3F2BA8AF009F67
+:102790008B4B2D72B8A494093D544BEFEB395DFC83
+:1027A0007B9FEB003C77D3BED77238AFB673A7756B
+:1027B000D5E18DA5740E0472C98BF1789FD04323A7
+:1027C00078DCFB8B9D6FBEBFF35E8676E0BC3FA5D9
+:1027D000AB6807DE5ED4A9E5A849CF3755C976BEF8
+:1027E000591762E45730161AC62E79BE99787EDAE8
+:1027F000F7BCD378B9392B6E77279E77269E6BB2BC
+:102800007ECE3FFB9E771EAC2A02386705649FAAE6
+:10281000C6CF335DD3CE9E6063FB9E770E32F52E1E
+:1028200043ED6D596FCF08756F14F3A38679021DC0
+:10283000BC399327C5F1087AC0E38679369501FC47
+:10284000682FE7743CBA80D9F0E8223C7C413CD246
+:10285000F936E265A714D988FD950603E5F94AE63D
+:10286000537F1088EF676CBCBC751ACAE7EFD47948
+:102870009903F87F73D63D6C19B44F3D92C26468DA
+:102880007F44BD87F6FBC847E92A9EF7BAFD967DCF
+:102890003071A908F8E4BE7ED2DF601F3DC8727DAA
+:1028A000F651ED28453D7BB9FBF76451F803E4632D
+:1028B0000FE86B657CFC7DCF088ECFDE9B58A44370
+:1028C000EABB8F806F8DFCCE3CD6BE91EA1B18C64A
+:1028D0000736498CE33B812E1C69EB0D3CD7762DE6
+:1028E000F7921FD5DCD040F83E0AF8367C9CBFF04A
+:1028F0009CEA22FC25E88249432F9F2E12F7FDC84F
+:10290000CE3AD67875EF6B3FFCB9BB14ED9ECBDDAC
+:10291000D77953B59CB202EB3E6B23CB8658F9D6E0
+:10292000E07E0938C0E44F2E64AC33B3AF1D956F21
+:10293000E6A5C0785FC7F1C69431330EA88DC1F209
+:10294000821B5843B2BC976BCBB93F560B2622C5AE
+:10295000558C54CABBACF5EDF83DE5611A37A9D6E4
+:102960003CCC3ABE0476FCE1F61EAC9F0B8B756442
+:10297000D12BCACB14F80995E5D0B845AB4FBDAE05
+:10298000527580C67781F0473FB5165F523E098B7E
+:1029900074921CD0D97C90F777AC95289FB3C64829
+:1029A00063E8D7C6F32AF626E455F0F2DC6CB3DE12
+:1029B00078B1C37E8EF9DA72DB39A6D19BA0DFFE37
+:1029C00048FACF665F58F4D9072F7FB2DC50ACE7E6
+:1029D000989FD2F8276BC57CC1DDC17CEB39A66B13
+:1029E00037C223E2D4F0DB6D3DA704C8A92CE2C8AE
+:1029F000A933B53A8C87ED9BA0AFC0FD914BA406DF
+:102A0000B48F40C16812C56B7C1DE84F83FDBF12B7
+:102A1000EBFFDED70976485399E5FCE3EF0DFED3D3
+:102A200022BE6F1C5F8EF05DEDF002BE7F46F8AEF9
+:102A3000E0F8FE3B80F7605952FFE4AA81EF6D8217
+:102A40002F760EF1EF0ECF876596F38BAF7A3E6D42
+:102A5000AAF6BF71FD5FC13A1C33711D66FEC165E8
+:102A6000B4F7507BF3BC34B1BE69A6E93F98E7C424
+:102A7000EFC4CEF1AEADC3F17AE3E77A74EE153F61
+:102A800047CC1B89E78871F8F3687E718E189E79B0
+:102A9000731DE545F7738E391FEB4759FBDFB41BF8
+:102AA000F9AC2D613E9759BF6AE6448237BEDE0914
+:102AB000345F7742FB1A737D6B674EDD6D58F00112
+:102AC0009DA87D4C2E31AD0EE78B9F3B4EAFB39E44
+:102AD000DF7E6FA6B65B9CFFCF443A36CF69FFA37B
+:102AE000E363C14C1EDF11E7E5820E474ED116228B
+:102AF0009EAE367861FFEAADF4FF37986FDD4C0B80
+:102B00003F7DD1FE317E34F5BEC89F00FC1A88DFC0
+:102B1000A6723569BE84F013C3BD2C827ECB5416D9
+:102B200091F15C221CD019C641637C6D54125FBBCD
+:102B300062F723E6ED46F917BF1FD1B61BED8BB840
+:102B4000FEFE559D3DCF616E9DF57CBEFD955F8976
+:102B5000753F6AE593811EFF7BE576BCC4CA267E7D
+:102B600096DCFDDF46D8EF5F2CA679DE89DDBFA8B5
+:102B7000DB6DBFC7D0B0DB9EDFF15D3B5CACD50E3B
+:102B8000176BB1ED574679EB6E03CA2E33EFCDB517
+:102B900042EAE77EC572920BE25C17CA36B940E59D
+:102BA000EC8187EBB7828E4C3E8DC1D9273FEF9BDE
+:102BB000BBEDF9790333BF452EBC8DFC30F078E7CF
+:102BC000F73B04DEFBBBDFB15815E5C6BAFAFC2FB4
+:102BD0003F2FE6FF59E5C9975F07BF2FE24ABC2F99
+:102BE000C236D6D9E5CF65C3E72A4F2A7F2EAFFF7D
+:102BF000A0F27EE58F0FC76DF63AE83E8AEE674990
+:102C0000EFA33495F373A9187F9AF751163C9CDC17
+:102C10009FFEAEE94F8B7877D0757E85F5BC6B74DF
+:102C2000398F6FE796C7F25072697D8D1CBE00CA5E
+:102C3000433CEF610AD380A7162E18918DF035FF23
+:102C40008E8FC7FCE027A7C7C7AB36E713F3BC34AA
+:102C50002FBDC69AD730D69C27109F2F40F3ADE7E3
+:102C6000EB9007ADA67B5E31BFDAF831E1B5C5293F
+:102C7000FCEC4EE2EF78DCB883E4CE22B7A0FF276D
+:102C8000775BFD89DB7EFD14C9370C5FE0395EBCE4
+:102C90005F7BDDE5F42B2B37F5F12673BF8CD87EF7
+:102CA000CD44B82FD5DFE24747A5ACB81FBD6F8232
+:102CB0003607FB833F3DB7BCE0D2E3009E16119E72
+:102CC000D6DAFD114BFDE2725B5ED2F9D517CB4B24
+:102CD0005A61EE7B7F79492BCA6379242BCA2DE791
+:102CE0004AC17925E905182719E6487A8FE21E734B
+:102CF0005FE3F95DBFA4F5B408BE33CBDB3379FDE8
+:102D0000B77EFD6C9DC9576BCA2DE717E2BC85E500
+:102D10001F8E629CC7925FA439AC719F92534EA4E0
+:102D200087A5DBA4A4F9337DF8A5D51C7F5B6C1FB8
+:102D30009BCA797C5FC7B8E36231EE3736D0B835CD
+:102D40002BF8B8897CB3D5C4DFD6389EB6129EB4B2
+:102D500058BECD8358C69401F7F8F8F8E27E4FD0FC
+:102D6000197E01CF755A0C4945F9AA372EA3734530
+:102D700056013C09FB141C96BB0D4587986F5C05FA
+:102D80009F0FFE598AEDFCC042C630B06B2B96D126
+:102D9000B9F3248DE7AD4CAEDA200F5129AFE547EA
+:102DA000B8AEA285EDCDB8BCDB6A7F2127CB67E941
+:102DB0008EE5B3B0B7460D05FE36E1C37B216B61EE
+:102DC0009E7762F92C5565EBACF92CE12F97CF2259
+:102DD000E27F4B428057CBBE8D34D739B282E33588
+:102DE0007E0ECCE8FCF6465633EB268C2FE3BD2D49
+:102DF00078DD6DDE73BB90CD2278FEBF617A2AC587
+:102E0000F17A33199DABC28664544FC23C12FE4B1B
+:102E1000195D4A715C37AC0BD781E7B2D1AFC1F015
+:102E200072EDA068127A7E234367012FC6FD8DCD17
+:102E30000CCFD5F447E87CEE86157FAEC77997EACC
+:102E40006E15496071BDAF8CF2B856079CEB300E21
+:102E5000E9979986F1EC2AE77BFC9CC643789A5B5C
+:102E6000CACB022F6EA6BC67C58B92506E3CB16177
+:102E7000CB214B7B5734251DCF05DF2E4FB7DD2BE4
+:102E800062B297E8E082DF11C173A86E85752900F0
+:102E9000479D2ED3F97BE7B635AFE3FDB1A57E257F
+:102EA000E0807596344A94FFB5D8C7F1F49726634D
+:102EB000CB21B0615386E5D239CC059F87A2F12D95
+:102EC000B59D14B7077AE95630AFE70199E1B9B774
+:102ED000C87F9A67D28BC063CAB28F092F17F03CA4
+:102EE0001CF1529849795073001FAA8FCEF93721EF
+:102EF0009E525943F41A98F756BF83452D7168586E
+:102F0000BF2D8F0CC6A6BC3385DED8EA093FA90FBA
+:102F100094F07C34B92A8AFB7AA190EF2B94034871
+:102F2000EFAC94D3A9C07F6A029DBA13F2C312E931
+:102F3000B40FFE2BEC78EF5458208AF4764C26FB25
+:102F4000A277A7924179573B1D9477C55884EE31FB
+:102F500075B2C18136949B5189CE096E33F126F04A
+:102F6000CE58C3E6E518E76EC80860FC9F391A36EC
+:102F7000637ED4E2481AE5DFDDCEF6521ED41DE8AA
+:102F800021C3BC77329F0BCBCB59809E12CBA7FBC2
+:102F900025B7EA12F185CEA2D53701FEA2D7393383
+:102FA000AD7955FDE635C1CACF5ACE23465598F2C4
+:102FB000D2A3FB799EA76EDEFBD1283F28B3ACD409
+:102FC000A32791B7A545FAD72B0A2C7918BE064638
+:102FD000E7D345E1311543E2FD9F9AA08DC5F2E4A8
+:102FE00042ED166CBF07ED3CD0078B0E8F7D02F5CE
+:102FF00059CB046D3CD627CAABD3FDE7DF451B8117
+:10300000EE7A505E511E613EF1E140E5DF9555F4E8
+:10301000C9BF2BA7F598F977279DFC5E19E5224FCC
+:10302000657DEFA735DE46F5E27E5AE2BD34F62334
+:103030005E8605196DE3F0FE6E03AD5BE03D113F6A
+:10304000CCBC97B6C4FF4A8F347600F2D67C60DCE5
+:103050000DBB187D18FCFE72F59A9E2CCA235428CD
+:103060008FB02587DF5FDE844D30116814B7070706
+:10307000557239BE25B3C11F80FA2D4E9E0FC3F283
+:1030800074B6604C7CDC4195B238176A403A00BB9C
+:103090008FEC2561AF8A76F7997AA1B14212F7CE0B
+:1030A000EEC7F696FCEE46DA0F6F34E210E776FCD8
+:1030B00047E740C27E383EBC81F269DC5A727BA190
+:1030C000B922A6CF9B69FC9D429F6B9B70FC19D7D0
+:1030D000F816229FB94A64D6817A6CEE5D24779FF8
+:1030E000C1BC51B06926EB1B4A86C27E3F52619E2D
+:1030F00037D56722BA58B7C6F349A3C50D7ED47732
+:103100005B8625BFF77DB282DBCF13AF3F2FE3B8DD
+:103110005B9681A7320EF167501E9BB1086409943B
+:10312000C1DD3F84E7321EB4038A502FF2F6BE7A27
+:103130006803FBD865E22B7823D00FDACFA3EDF933
+:1031400048E229DA25E65B81284FC77527E6B98969
+:103150007CAB1EC5480F24817F6ED95A0FE56B6585
+:103160002FF7A09E6CD14A68BCC4BCB72DD96C04A3
+:10317000C29598D726F2A644BE9418F7B90A4E27EE
+:10318000226FCAEDE77A0B9E942713AD50CDFBBB9F
+:10319000F6FC36915F83ED29BF269BF1FC1A7F0375
+:1031A000C37E6E2863FBB0997F9698570572E8201E
+:1031B000D1411FFB88919DD15264E60D306DF332F1
+:1031C000B48FF0FC3690C4BE0281807AD005FA0933
+:1031D000EB15797505A6F27C593BAAB428DC83F07F
+:1031E000B9FC3139FB3B82372E67DF35E5EC09ABA3
+:1031F0009C75BFBAF509B4BBB7489C0EB700DE9FFB
+:103200004E421F1F98FCB6253339FD7C6ED26BCB26
+:1032100084F08738BE96C5EF777C513BB3256E6747
+:10322000723C0E909D09F8F8CC2AA7011FFF2F19B8
+:103230001EE0B709E58625CFD45959D07F9E696233
+:10324000FF2BBD277C0DC80DE43FF0077D95E40FF3
+:10325000723A16F2387EDFF6CAE4F53107C85180BB
+:10326000076D026BFBDC4A2EE7C64DD5732B492F49
+:10327000F3FBBE5B83FCBE2F8B6AA4F78FA7EB35F5
+:10328000C8A72C6FFC25E6DB60E6D3EAF56192F374
+:10329000F32FD17EA339BFB9DEBCC1A43FB64ADA51
+:1032A000AE54395EBED4FAAEABD42623FCCD7A98A8
+:1032B000BE97B025CFA11AB0B47F9AAC17E3FB2D0F
+:1032C000791B69FFDA80E024909B731CE71FCA9585
+:1032D000281FF85969103C3DE0B125A1EB59959C98
+:1032E000EEC18AA57A7642F35BE31C6B4DFD16CFE7
+:1032F0000778FA09EB3DA61595FB5618163D86F1A1
+:1033000092A793D0C5C24ACE3FB27B8D4D4F26B611
+:10331000BBB5D245ED56569AF10853EF2D72733F67
+:103320008A1D01F82C7A75DCD4D0EDB4AF063324B5
+:103330008B3E14FA8F6A2CEFDD7E7EFF841DB38FE7
+:1033400023D6799F49A7625EA0D755C81FA077BF33
+:1033500081F388FA4532E3F18E6E3BBE009ED59C28
+:10336000CED88A587E96051ECDC1C78DC1D1638740
+:10337000E33E733FC64DD5EEC371401FAFC3676BCD
+:1033800008E82D095EC71784BE8DF50A335A73739A
+:103390002E6AAF6EC076A26CB1579B2BEDF6EA2673
+:1033A0005C2FC8D1CDF87E4F6AF2797798F81AB0C1
+:1033B000EF065C269F3F88FF4CC22F6DBDFBD2C637
+:1033C000028BB9DDC6BDC497F9E32FC1579C8FEFBF
+:1033D000BCBE81F4DB0BA6FDF1829329985703BC98
+:1033E000154896EF73B452D81B91E18897E7FAB16C
+:1033F0003762EDFAC9ABFF1ADB9176257647DBB46D
+:10340000E36964777CD29186FAFDB933A1A476C7CB
+:103410000BD93B8627B33BF6F76377BC6ADAA7077D
+:10342000DF77911D517C8EDB1DC5E776C8683FBCF8
+:1034300059A9D27A8ACE74CB3AC05D8C76078CB308
+:10344000DFB43BB03DD91D9FEC9011AEA273DDD42B
+:10345000AF18CA687714F56377001432E2E1D9E255
+:10346000B67FC5FD4B5CEFBC897A8F956E0B7BBB3D
+:1034700029BE23FAB5E56D4CD369BFEDF4535AA4C8
+:10348000DAF2E20B7B39BD27B6EB8FCECAE4AAD6BF
+:103490005E58D75696BE83F2319586C7B16C180A2E
+:1034A000FF3E1E7E5F039EF7CF051832B15DC34F0E
+:1034B0007A51AF186E1F7ED7E02FA94BB99FB396F4
+:1034C000F99C53E37288960EA01921733C97C7D7D5
+:1034D0000C76D2F7D332088F8D3E11CFD951910B94
+:1034E000FDEFFFDA28BAF7137A040682F2D46332CA
+:1034F000D58BF8CFEBC318E5E703FFCEA986F127FC
+:103500009BE3839ED3EE85F68B4C3B6CA6ECA5F635
+:103510000FE6F1F6538DF3F5582EEA75A978BF8CB6
+:10352000C9EBE5BB316E8BF608B47FF0F9709907F3
+:10353000EA538F032438DE0917C52F447CA1E0D855
+:103540005EC267DA19972DAE910A122F6AB15B5CE1
+:10355000096526D70E4A269FC433310E71ED2CD350
+:103560001F1DCB6EF91CECAC0B6C7D2BAED13D3A24
+:10357000747037EBDB5FC419CE4FD446CC827D1C10
+:10358000E5D4C96FD95F01B8867DDABF73E7ECB1C6
+:1035900088F71D0AC5754F7E3B8DF6E9C0234A3B6F
+:1035A000C6934E029FF2F8ADB112E9F5403A13E727
+:1035B00040518CCB1D88DD67CE5EA959CAE35E2BD6
+:1035C0007C1FF5E08121A2FD8F79BD281BFFB4127D
+:1035D000F3360E0CE3E525AF3DD369101DF72AE461
+:1035E00057379EF626939F9366DBE9784EE11A4E95
+:1035F000C797E807F27EC6AC24FD52AAB97F75A032
+:1036000016401A8778D24B67015FEFEFB9A7750CA8
+:103610004C3571DAB7BB498E5ED3BB3699DC5F306F
+:103620008BDB53D1E208F95BE0C3737F97298730C6
+:103630007F750E53C7A35FFFF0F4E77E3316E6797C
+:10364000A368F47839095FDF3D2B97C689C37754A7
+:103650005E8E72E9A3F716269303DFAFD417DBD78C
+:10366000C3CF479B772884FF0766FFDF2730EF2112
+:103670005ABC83E277FBFFE460E8AFEC1FC3ED7E4A
+:10368000BCA187DFA51C00F8764E4E427700DF5DB7
+:10369000B30AFAC2377936E3F9A113B56F617D2217
+:1036A000BC2AC6B9015E30AF022847523EFC2FDD6E
+:1036B00018CFDCDFEBA0A0CA85331D3292605B4FD0
+:1036C0006E299AAB33AA4EC94852C5BE4736E3D1DC
+:1036D000AFBE5EB6F1DFE49E545BF98E866B6CE59F
+:1036E00025F5C3E3FCC8F01ED0485BD9EDBFD95621
+:1036F0000EB209B6F2C2AAA9B6F1CA7C25B672B951
+:103700007FB6AD7DA5BAC0569E9DB7C4D6BE3A5011
+:1037100067AB0FE78F53F00A1FD0E5F771BFD38E69
+:1037200069C4E75B7AEEF1215D448BC3E44F1F4F20
+:10373000EFCEC678F5EBFD7C57EED42CAECFEEBCC9
+:103740001E4C239493A0CF3766C6DB07737B6DF1C5
+:10375000F8C3B3B87D7A7056623CBEBF7B705C3FE5
+:103760005FEEFDB7443D3CF7A67B482EB52D942374
+:10377000789FAA39EF2D2FDE1B7B7D218F23B46527
+:10378000C33ABD948F41FC7570D16D23F05C2D352B
+:103790004FBF06E5BFD0DF257911761AEA537D11B8
+:1037A0003612EF9741B9CEBC675692CFDFDF68BEC5
+:1037B0005F854FD0DB332DF84AD4C741CFB897C1CE
+:1037C0005D60D3FFEAA3EFF72DCCE7F19ED24F2245
+:1037D000A5789F7AB6F6D2217E6D9ACB9F378AFF65
+:1037E00098D58FDE7ED3CEAF47891FF69F997F5144
+:1037F000F9FF87261E5F7FA6C9C3A2B0BE134D3E48
+:103800007AFEAEC94FEF8F36A9F46C69CAA367B4CC
+:103810002940F5FFDA5448CF434D1A3D5F69AAA00D
+:10382000E7E1A630B57BADA9869E479A747AFFF191
+:103830002CCE97570B3C5A9E8827840F3A24C2EB14
+:10384000424CD59D724E93ADF21DF0FA6932BC5ECA
+:10385000A91E8916EF1D1EE67A2A291F0D9D2DEE41
+:1038600085713B798E4E323F069F0BE37359F1F819
+:103870009C1B4D9AC104E7A0D9050307E701337EDD
+:10388000732093D53CCDFDBA4D12E91BDF382ECF06
+:103890007F100E913C1F322EB93CCFE923CF979178
+:1038A000DE6287316E8A6945288CD7E1FCC9E32145
+:1038B000C6A09C8BE281CE2B051E2CFB15B8123CBA
+:1038C00024AEBFB4489B8CE3E03D14E7E0BE7AE44D
+:1038D000C6DECF348C493D9BCFE17DF8BDF983D066
+:1038E0005E7163308AEC1570F00A71BF99698FB40C
+:1038F00077D667F71DE70FC57B49AF3F18B3739EB7
+:10390000203B26B11DFC0E111E506F59F090440E45
+:103910008493ADBF4C7EBE7723F43FD0CB285EA608
+:10392000A24D0DF03FA7F0EF341C38E7203C5FF0CC
+:1039300048241FDD0FDCEBC1D8F6B3DFE5ED8C6A60
+:1039400089EE2FA475ED57D14E0DF6EAD7E0F7C6F4
+:103950000AA3954EFC3E6868DAB8408A850E428A12
+:103960005D4FA2A51AD33B140C1B9C50BE2EDE5EED
+:10397000C6FDCF8D9773E8DEF53FCE063A9D7FBE3C
+:1039800081A9F9667C35399E564B96789BC202AD6B
+:103990009373C8EE3C741D9EDB8C661199E8CA20B7
+:1039A000FF5BC02B7BC3742F4FF8E99F4ADAFDB34E
+:1039B00093D80FAC5EA37337E670D0B95BD304BD68
+:1039C00069369DCF279CCBF85EF93F12E8B45607C5
+:1039D0008BA27D6164B8087F89FB35B9B07213AEE4
+:1039E000CBFFA5FDFA1D92F53B0137AA33C89FBA5C
+:1039F00000FE14DE436956F8FD28E3447AA4938060
+:103A0000647968B7DD2FDF1CC0FDFF7EDAF7C83FA1
+:103A10006A047F0BFDAF6DA61CBE3F35A383818278
+:103A2000DAE66CF81F58DF22B17007FA5B29D74736
+:103A300058461CAECED95C9FBBD91D8390CFBCBE6F
+:103A40009927CF4C48E6EF71FFC419DBF76C1FF9DB
+:103A50001B66D9EBD2FD98F7D8326EF52EBC8F6578
+:103A60000CF1F0F34E25ACCE03FC3C64DEAB653EBE
+:103A7000836559EEEFCB4C398BF1D9563066F07C2B
+:103A8000F79709F038AF101E174A18F447B35C11C6
+:103A9000CCAF51511E015CAD7E07F1CD2695F3FDF3
+:103AA00026AFE6F125D9B72D884777FFFB29E76CCC
+:103AB000F2611C7B87D7417CD9AA2A5B73A0DCEA20
+:103AC00055F8F75A554745B27CAD8F6673BB099AD6
+:103AD000A4507E53703ED931FDCDD366EEA728A702
+:103AE000E6EB1AF18F1A08E37A9ABD5912C63745E8
+:103AF000FDAFCDF1459C78AB6917A5E6ED8D62BCB5
+:103B0000A665D8AA09882E0FD83967E1BD277F2F6F
+:103B1000D9452D433C35C9CEBFCECFE671B6ADCE2B
+:103B20004005E2736BBA831980BFAD39C9F5608F68
+:103B3000B97FCDEAF830D12DE063B4D4B7DD6F4C56
+:103B40007DB9D9B9C38FF7D0B68EBE95F2BCB68E0B
+:103B5000E072B7F1C889CE0DF9C80FDF62FF86FCAD
+:103B600090A5D0BEA92CE041FDD5E2537CE8EF4FF3
+:103B7000CC5AE7095AE497A0FFED6887C0D3396CA7
+:103B80007E0DD2E385C2D40022BD4C3E42DF0969DE
+:103B900009803CCDC13CA4069FF5FE3FD8D37215E9
+:103BA000C0951E70D8ECED4185767F4165BA87E8F7
+:103BB0007318A7A3FEF62F111E2F4A9CF117699FB9
+:103BC000A9D724FB2EC9B82A8E574137CE4BD0CD6A
+:103BD000A5E0B7E9BBECB8BECBA91AB10ACF2F1E3E
+:103BE00062BC7EE491F39DE8AF2796BF2C7F362B15
+:103BF0003B481E378F72113D25F6DF9AC3E1F9600D
+:103C0000F647341F861570DF323D3C8EB4BD7070B0
+:103C10004A32793B6BA25E5465B18B324BF7921EF0
+:103C20001D5CC5087F5E35EC1B05E3788FC940A39A
+:103C3000806FC7677F3DA55E391E951D0D2CCCC7D3
+:103C4000233983BFCF40BE6598FA64CB0D6F30CC6B
+:103C50009FD93E5209C89487702470313BDA5B6863
+:103C60008F137DD138504D95998F92C252781E5046
+:103C70005548A1FC1B07D79F1AFC3FD4BCC22E9904
+:103C8000FB3FD43C5A52F1158F7F65D5325A4F2CE9
+:103C90001F05BF2783E3E88CEC0CBC108BEDAE5BFB
+:103CA000CDEDA86CD62BE1F9DE0D98952323BD73DD
+:103CB000F97981653B281F07A6C17C12C97090BEA7
+:103CC000FBAF379C9482F0767BD1AA71B83F89EB29
+:103CD000585365C6B362EBB8381E049C034DA74227
+:103CE0002F377BB89ED54021A7A0119C10D72C93CD
+:103CF000D7535CB3C570FB500F372BA077B3A877B1
+:103D000098E2A00971CDBFA4F0B8A7B48EF9A4229F
+:103D10008A6BE6E13E35B2D400C61D0729BA07EB2F
+:103D2000D346298CD355C3643C3F89FBDBAA97E774
+:103D3000BF35529EE0AF50AF41BBAECF2E2E8FF6B7
+:103D40005D42AFB51D1BE5A5B8B9A72E0DFDEC670B
+:103D5000FCB947D06FB9E0E1F95BA25D57C2F74CFF
+:103D60005A4C39D75365C6C753FE2263FF197E5597
+:103D7000C13CB990671CC9F76629F93940AF29DF02
+:103D80006E54DFE474B65A7C876C35C9FF77D34D27
+:103D9000FAADD79750BCD8B4E398A6A9BE4971FB39
+:103DA0004DE84BBFE233EEC271CCFCA93EEBECFA1E
+:103DB0000786DF57617E4BDC3517E71F14CB9BC3AB
+:103DC000F913EDB6FEF0D966FABDCDFE10E55D5CE7
+:103DD000409995E45C443CC1FEEC463955D06D9762
+:103DE0002F697976F9D2EA68A03C2EE366E6C33CF7
+:103DF0000F5615F05BED5FB0438F571133DBEDC904
+:103E0000FBAAB9BCEBCA54158CBF9478820CCF1BAB
+:103E1000946C9DE17EB8FC818BEEC7CFABB8DE6FB2
+:103E2000C95B1E467FE5E1E9DF24BC4CACE079A527
+:103E3000A21DE8CB0FAA2C7E8BC83BB8ECEF23F970
+:103E40001C948F78B9F1A1B6692BF9F791FCCBE9F5
+:103E5000FB48CF78F8F791BAD2F534B4BFBEE8F793
+:103E600091EEAEE6F41AF27CE3E08C5C0B9E7A7481
+:103E7000CA0771F9CFD3B9CC0C337F24310EE47665
+:103E800037D0395AB4B86189350E2CF0F77393AE38
+:103E9000FF50AC539E4F7F7FDF41B4438CE1BADCCF
+:103EA000669C734BF1B709FFF32B3229CEA49871AE
+:103EB00026D7799DF27A3B27EAD7565BF49D3BDB08
+:103EC000207D97F63DC6EFAF7FCAEFAFA76D6421A7
+:103ED000BCAF1EFA6C3C9D3F85A229C467D33F0945
+:103EE000D0F7A7CBE4A75A73A1BEEB9842DF85EFCA
+:103EF0009A9E9A857AEDE363DCBE4DEBBAE9C82D54
+:103F0000502E3E5687BE3EC81D806570DF754CFF43
+:103F1000C4F1A5FCC702F41F2DE72062DC5F361D4B
+:103F200026FAD8D7D44DCFFD4D517AB635F5D0B35A
+:103F300050D14A703D85DD7426C9A69C817A0B1C40
+:103F40008527A0BF851E864CD4B56AE2BF6E5BBBD9
+:103F5000B4BC1E5B3BF05F4BAB0B308F87E3D3856C
+:103F6000DF0D83F1E7F6B0CD92FA1F4A5EADAA1ECF
+:103F70001879F58FD505179357FC9C34D4637E27A9
+:103F80002C811F1DD52AF90D31BE34CF4B859E6E75
+:103F9000C57F823E6DCEF826976FB17C0C7EFF50B8
+:103FA0007C677EE3EB1FEDA1BCD277CC7A83FD4426
+:103FB000B3D433F6C92ABC0FF2123AAF60879E7BA6
+:103FC000BD6B15DE9BBEB52653D100BE123C58CD4D
+:103FD0008CDF7F11798A8978FB9FD59CAF8FE7FAB8
+:103FE00028BEDE92CBFF5E4162BB37ABB9BC409AC4
+:103FF000B0FE1D8FD47EEEFDBC2AC635F1D6EAE2B6
+:10400000F907FDDDEF78ACFAE2F73BFE60D65FEA38
+:104010003EC72FCD795FC4790B282F720FD285F858
+:104020003B1B51F37DECEF6BF859D2717E6ECADD0C
+:104030001BE7F8CCFDD414F33BD47B893ECCBF877F
+:1040400020EAA79C8BD5EFA3F9627FF740A7F88FF2
+:10405000B85FF7F3EADFEED960F99E574BEC3B8986
+:104060003C6FE95313FEC4A7B85F12FB1E147B6BB1
+:104070008F66F91ED44FAADF396B7EAFEA10C16795
+:10408000DEAB79348E875FD3FB84EF0374BDFEDA39
+:104090001EF33ECE6FA8BE21F1BB5BEFEDB1DEEFAC
+:1040A00079B4FAD42AB3FD515AA7F99DAE247461AC
+:1040B000D2ED993D789FF032C67B97C633BFB3B53A
+:1040C000D9E4A3FEE819DA9FA2F6B1EF0FD7795031
+:1040D000AFC4EFF1BFBBC7F6FDACFEF1F5475AB771
+:1040E0002EE665667E13E717911F26E8C23B87EF31
+:1040F000C776931FF0FE1FF55F316078F88CD69578
+:1041000070AFE852EBD837212CCF4138FCB1FC62BC
+:1041100085CA5F121E711F2C913F86CF91445EF3BA
+:10412000609A273BF61DCE6B06625E1877048D13EE
+:10413000FFBEE7F57392CB9F2F342E532F2F6F4482
+:1041400094FF3F19A999BA607100000000000000B7
+:104150001F8B080000000000000BF3176060F8518F
+:104160008FC09C687C5AE3BF4C0C0CFACC0C0C97AB
+:10417000D818189C39191884F8C833E7229ABE7BDE
+:1041800040B366F030302C636560D809C47A5CD8DF
+:10419000F5D90822D847817E5F01C417E91C06A320
+:1041A00078F0E01A11068649A208BE9E18AA7CADD6
+:1041B0000882AD2345995D4E40FD008850BECB80FE
+:1041C00003000000000000001F8B0800000000003A
+:1041D000000BD57D0F7C54C5B5F0DCDDBB77FF2728
+:1041E00037C9029B10E24DF863D04037103058D4E5
+:1041F0004D041A90D7AE69ABB1A576A14A151156F8
+:104200006B9567D5DCFCDF841002A202455954107F
+:10421000ADB6A9A2B59FE5BD0D508A7D7E9FE8533E
+:10422000AB56FB62A5B45AA5F1594AFA7D086FCE88
+:1042300099B9D97B6FEE6E962A6DBFF86B87B9F38B
+:10424000EFCCF93767CE9C99956C6E52760E21A70C
+:10425000E1EF12421EF21242C6A4D2CAEF7DF986E5
+:1042600027AAE8BFBDCED04E9A54FE626E71B4222A
+:10427000557F1611B05EED2F96FC91D07AFF4EEC73
+:104280008A937EDAE71FF486685E15EC04DA394912
+:104290004DC1BF0468F9902DD445F3C993361FA1D1
+:1042A000FD4C2776E8842844F645A6D1EFE29773C3
+:1042B00089AE7F737AF16691240B08D97F27112389
+:1042C000B45E9BFF8225033E425E6C4CFEE5C864F3
+:1042D00042C2C9A9A242FB39D07808F3FFD678F8C8
+:1042E0002F471C8444491E8E533BF72371296DB719
+:1042F000DF411AFA68BBDAB0E058AA1B2FCAE7B34D
+:10430000DFCDCBE51AD1B2DC4FCBE9F7DAC0E596C9
+:10431000E5513A23AC97C7FB191AB0433D850C7A97
+:10432000719E27EB2DE7398EB7D3F255036CBEFB98
+:10433000DE3E7119D0214972234E484F96BD05F8D3
+:10434000EE77090A29A5F81D5884F84D027E6917F1
+:1043500027DE61F8DEFF892DD444F15DEB927D21EB
+:104360009A2722A5072DAFF59130C225D294C271AC
+:104370001987FB2A9ED6438A7451902EFD2E4A1728
+:10438000DFE8F05EB2594278B579F6C33CB368A76E
+:10439000D1957EF545FCB41DB1E68391F8A1E3CD3E
+:1043A0003C733835BC46E6F6FFE5888BE0DF69FAFA
+:1043B000BFF9F2F37F39529ECA5F3274D890A71CBE
+:1043C0004D5CB329BCF04F0552F1CF035A79292B2C
+:1043D0008771E28DCA9F2751FEEB6D247F9E44F9C1
+:1043E000AFA7D185F9EE4619F35D8D41CCC745DA0B
+:1043F00084D231DE4D122A6D9F17A6F575E3E5567E
+:10440000D3763AF8FC21D990F796070DF5DD8A624C
+:10441000288F2B37DB1294EE9D15B6845D0038A8EB
+:104420008C9C0B70B830A5E0BE16A4F399C49A908A
+:10443000750EE5576500CF4B76D24CF3394AD8B6A6
+:104440008CE64B82769208D1F1730609A1FDC5EF87
+:10445000246423EDAFBB72B66D19CD77CD71CA76EA
+:10446000999004ED3FEEA4FD9C4A2A2DD0CF34292B
+:1044700004FD905EF1B7802717FDEF741921131525
+:10448000E91D5B0E21A52AFDAE9F9F530D825CE7BF
+:10449000561BBF4F5496DF4868FD8944F7BD34452D
+:1044A0004F6D5C2D6F1ECF3CCE396B4CFD9BFA2DB2
+:1044B00051066AE48A54BFE790C126D9F7CFDC6F72
+:1044C000B856003A858892A83C7B70FBD67C9C77D6
+:1044D00064660ACFDD0EA607CDF236406CA83F8891
+:1044E000388684295C8A624B74D17EBA4A6DC83F93
+:1044F0004A1B4980DE5A37E1700CF25DA592D24C1E
+:10450000F3A5E5071B84E984AC9D2023DF75ED75D9
+:1045100092E610832340F9B444E3D353033565C0D6
+:104520008702096DA4E5A5CAD126A82FBFE6511CB4
+:10453000D523E747D6B0F9639ECE7F10FE316B647A
+:10454000BFBF9C258523C0B72A4938293C9D939A33
+:10455000EB543ACE03AA48407EBAEEEC7B1DF01C29
+:104560009FCCE035CFBB449196025F13FDF874BC3D
+:10457000924957DC00F332C3A1E98BEF37CA288F89
+:104580005B1ACB317DA051EE033DB1E513BB257E17
+:104590002F13987EDEEA88D8003E758E2DB113F574
+:1045A0004F74EBF5347FFF77C7CE8075E0E6393680
+:1045B000D42F7FEE66F8BE5FE8BD8A607D49C1FA00
+:1045C00026F97F400C377F8BD6BF3F5840542ACF07
+:1045D000258EC30BCF85FED69455AAB4BFFB6FD9E9
+:1045E000F80EB42F993345B1D3F613AB8FBE4517F0
+:1045F00071B2E5D44030E2833C93EB923563FB2605
+:10460000513E19AFF4DE04E397544B4AA234C597E8
+:10461000C52484E39CD3E025497974FE2C5E9999E6
+:104620003FCF9E1EF8FBC85511C855410AEEADDCC0
+:104630003E31D37DB160437E1996AB6A26574F5EFB
+:10464000C8E8ACC9D59609BDEFE5D27CCF37189F35
+:104650009AF9BCB4FA680DD0B59BCA4F7E909042CF
+:10466000A7F2B140F33D4BB91C561F1596D3F67F08
+:104670007AD5A31090A725D6FA3A1D3FA752E3B8E2
+:104680000FDC62AB8DD07ABFBC76CA1F9D30DE12C4
+:10469000490139EB11CB717CE5BB92A2EAE859B232
+:1046A00084CA13E5AF925BB8FC98E46AB4F1E38D79
+:1046B00009F22E95A30D8D4112A6745BDFA8A07C94
+:1046C000ADE37206B62829A4792E67A47C06E6D34A
+:1046D000D99F8434A1DCB994248952FA6CA07D93CB
+:1046E00022F89E0C87E712920FBAEA42042769A3C8
+:1046F0006BFBFAE17212A64C4F7A049E57FFA88614
+:10470000E9787288E59F6BFAA3DA428570839BE5AE
+:10471000F70AE535EA5C7DFB83D8BF569FE693B583
+:104720009374FD41FF157A786C35505FEBEF8DA6E1
+:10473000A21A958EBF9EE7A5E63C963FCBFD770B70
+:104740007D41CAF464ADA99F6E81E349FD8F70D8A5
+:10475000971AE73EE1BDB06A28FF4318F0A495FF21
+:10476000A0E93F5495D6FF8844B608940E33E64539
+:104770008B08A5BBB72E49C094DA60C2776A7E2F3A
+:10478000E1FC7C152CFF60D32761C0B756FE8CE09E
+:104790006F027C03DFF8C6121244212164F3CFBB01
+:1047A000AF7F01FE5D9E4FC81C3A8ED24B14DA8754
+:1047B0006D524C807D47708978D4200F9CEF287C07
+:1047C0004F08349D3137FA35580A2DE053F5F0691A
+:1047D000E38F06AF06477AFE64E39BF9A87641F5BE
+:1047E0008B73A97C790F3B424E05E6210BA0C7F3E2
+:1047F0000128AAD7F24EED473A11B12F0876B4B985
+:10480000DFFC794524A19BE7674DCF2D9067787B2E
+:10481000454F579A7F4D8FC727A0DEAC917CA7CD1F
+:10482000CF0DF3236007D3F955E9E7F75403CC2FF5
+:104830001DDECCF35BEFEE6D8858E8DF8B6D7CBF3F
+:104840007B71F597A07F3A1E01FDE5560651FFCA20
+:10485000301EDD6AE69EDADF005BDB74E3C973E9D4
+:1048600078E5670F9FA3F1B18FEA2F85D6B3853224
+:10487000F3B1599EB5797B61DE02F011DB0F98E749
+:104880004D08E523FFFFBFF3FE5864F4BC85F6AF87
+:10489000B27931F9F807CDEBE3170A505E011E3B00
+:1048A000E3E7A0157FBD2B28867DAE99AFD3CDEB76
+:1048B0001FC5A723E79519CF675B0F65AB5F9B5FAC
+:1048C000F3201E7BAE61FB849E43F3D1EFD0F3C295
+:1048D000A5E3008E9CF8F9244CEDDF29D03FEDAF25
+:1048E00047B32F36578DD23FB32FEE6B247DAD9358
+:1048F00009793A6700F7C3144E6CBF95DA9F09AA8D
+:10490000E0AA5EBAC5BD948EB7F5BA8D6EF02BF5F0
+:10491000707BB1EAA587372CA0F81C776D7EA59D2A
+:10492000B2428F5BFBBEE7F929F4FBE66BF877EE4A
+:10493000BFA2DF5F82FA415E3F1D5C85D2403482B8
+:10494000F242E1D2E15F2B7FCAC6ECD227C1CE3A58
+:1049500017F633CCCE2AF4F42E05FAE66C959407BC
+:104960008591FDFE6FAE4FEF033B8DCE77CBB5ED5E
+:10497000456057EDDB317BBF0FE0BA86A03E3F3785
+:10498000B1ABDFA1C0F8AA00787ED241343B0BD78F
+:10499000F9A26B34BAD60B974EC276DCCE62F9EF31
+:1049A0000FAFAB5F47BBA538CAF2CF347FB7A64580
+:1049B000D495ABDFAE0917A7CA5F6CBEB106D6DDD2
+:1049C00019AEE89B7329E96650BDD742E198212AC8
+:1049D000F618F0CBE680A5BDB8FB79574382E277A5
+:1049E000F78E2913AFB55847281591CE5A7EE62188
+:1049F000A39C3D09F873021E99DDDA4DD10BF583B6
+:104A000051A505F039F31009C17E349DBE4B47C74F
+:104A1000E036A3BE9B211AE775B6E6F31191D97E65
+:104A20009BF74FD7F5976D6C3E7690A3992293FF35
+:104A30004F3B9F24E089D911BFB1EAFFEF35DF1961
+:104A40003E3A4EE0B31F27681A275DBF667DA5D6A4
+:104A50001241047F7C1109013C79F36204FCF87671
+:104A6000DFE1A04AED3D511EC0D411180CAA54EF4D
+:104A70004A41A510526771A810BED3FD11978F8EC1
+:104A800026D4ABC3F9CE26D0A3EB218FF2B716CB39
+:104A9000370EE7D761FEEE094C3ECFB1DFD30F7A78
+:104AA000B80C940D856B5DFF1B0DE0072838E00BFB
+:104AB00081A951E00B11D0C35A794FFF7B4117D820
+:104AC00071077CC44DF93D5F0E137DFBF5FD7F0D35
+:104AD000CAB4DCC7CB7D8188A17C63FFD4C22045EA
+:104AE0009187977B82512CBFBB7F4EA10276CC0170
+:104AF0009F0CDFBDC5311CF7D25FACB4A13F76B1CE
+:104B00002DE1D4E9ABF8E219A8DF9708D1A9764ADC
+:104B10008F9A5F74BBC07E881FA81807DFD1E6415B
+:104B20007F92F87F613F0AD9D36807F9E4A3E7735E
+:104B30007AD953F4E886F30AF403B3738A383FA7AB
+:104B4000506B9349185FCD6174A21C9DF23F63FBCB
+:104B500043297F35E60F1BF27E3911867DB418A0FC
+:104B6000FA81B6F786D530D05D2A6679BB2F9404DA
+:104B7000FDB1F91B2404608B149F507FFD1C9A57D4
+:104B800080FE116CDF398BE5A56054857CBC92E515
+:104B90009DC5B124E4D74E65F9CD1A9DC9A3463E03
+:104BA000207F42BA770EE7DDCD501ED7F886789B7E
+:104BB000A17CED454CCF168935FB00FF9BFB3B0BE1
+:104BC00097D3FE73811F68FFB94B42482F8D2EF794
+:104BD00029365C6F35BADCA7CCC07382CA5C8A09FF
+:104BE0009C9082F4A83CE7669B0CE71DE7DB123B38
+:104BF00005389FEA760FD07A9BCB6760798968E7A2
+:104C0000FE01E60FDFC9FD0165D4BA00BB63275F73
+:104C1000AFF7DD332517DAEDDBFABF90DE17DBF3F4
+:104C2000B0DDDA72767EF32C5DA7C14FF74CA30B93
+:104C3000D31FD1FEA2545F3FD1E8C2F4078D32A644
+:104C40008F523D0E69372D4F82DF81962769BE6FE7
+:104C5000C05607F27F4F2335CD68FBBB1B5D1F8B12
+:104C600093C15F21637E7D6310F3DFB6D5AFB133AF
+:104C70007F8AB782CEEBE99727A17F2FF4862D920A
+:104C80008079CBA4607155EABB869F6FDB6AEF0425
+:104C90007EFDE18088E31071A0EB7CEB7ACD506F54
+:104CA000FA1B22EB2F30B0F1B28065BD0EA8F7F8E9
+:104CB00011063771253D69FAEB06782BDEE6F00523
+:104CC00093F969FADB00F51E3BC2E1F325BACEB3D6
+:104CD000AE772F8C7BDEDB1CBEE2C4C645D6E37EFE
+:104CE0001FFA73E5337BE573E0CFA8C2756087A038
+:104CF00093E74D4B55C146E9EC2A188841BD6955EB
+:104D000031A18C8E1FB83A26D8A6313BC346F36E2C
+:104D1000E887A6E797D3725A6F1394FB75E5D09E88
+:104D2000A6532B5879E09BC6F261BDDD40343B357C
+:104D300009CED6E0578CF92936A61F9FB3FFB606D9
+:104D4000F87D8AC4CAFF1BF260772D36D5F7B0FC18
+:104D50006FB5FA39ACBD4D6479573E9B77CE565747
+:104D600002ECAE0DF3DB83CB7CA9F9E62D889743EB
+:104D70005E9BDF86055B83CB74F3C9FBC2B6F2652D
+:104D800015E9D715B7622361DDBA3BA5B782840B5D
+:104D9000FEF9F5CB5775EB06AC2BE3F8BA30AE9ABB
+:104DA000AD2B146F2AB35719DED65F64C45BEEC512
+:104DB00046BCADBFD888B7DC4B32E3ED977CFC74C2
+:104DC000F8A3E387F5E36F5C681C3F7F9171FC8D6E
+:104DD0008B8CE3E75FF6A9C74FEAF9A6B7C638BEE2
+:104DE0005C6B1CBFB7D638BE7CE9A71B5FA34F67BF
+:104DF000FF16E3BA5E15217AFAC5FB3B8386753D43
+:104E0000C4D675AD7C6DFF4F83B0BEBB617D07FF1F
+:104E10004C395BDF2BDFFD28087EFBF5171D0CC22C
+:104E20003E633DAD7BB822B56EECBBE856DB63B4A8
+:104E3000DFEF4C65EB4CFF45CFB840FFAF2D67EB84
+:104E40004C9C9FE77635268FAF74A4E6E58FBB7147
+:104E5000BFA7E587ED25F2BB1AE0C378B98DDB4B20
+:104E600085CD616A8BBAA68A867C67052BBFBDB5E6
+:104E7000B059055F8AA816C23AE42D277FAEB0D894
+:104E80006F69E36BF0A41F9FED8B53E34F348D3FAD
+:104E9000D130BE96774F63E5AA38A916E0D9CCF792
+:104EA000CDB788BF43FD72F6E09BD61C9EA4878FCA
+:104EB000E553F0B1BC06DF5DE2F45A75D2DF13BEF4
+:104EC0000B4CF8BBC084BF0B0CF85B23569F11FE44
+:104ED000CCF5BA4DFC790309DF268E013922686FC3
+:104EE000C644999F07B1FEAA442E5F303EC4ED2C04
+:104EF0009512934B59793D5DD796887C1FC6EBD7A9
+:104F000099F29AFD0ACBD169F4C358DBAF12617AEA
+:104F10009BDA1DA19DA8D743284FA97D07F363887D
+:104F200062241CB1D007F78AEC7C5890430D00A78F
+:104F3000E893D08F9AAE7EAF2870FB5A359CEFE491
+:104F400092C1A41DE008128C4F2227BFAC5C3E6DBD
+:104F5000241C921889C2387659220FD2715AF3AEA6
+:104F600050F4714C8F6AF004C3088F2433782431D5
+:104F700014B6F2033F2832BF85D60F8590B71F24A1
+:104F800060276AF0B5B9230D4BC19ECF93104FAD8A
+:104F90007EE379F96FF8BC5EE4696B9A733F02D1E6
+:104FA0001810BF34B61AEDD096EA5A17F0A542424F
+:104FB0002EF0D7B7FAACE389B4D46C77C6A95D0AF2
+:104FC000F9766A9742DAEA7BB20ED69DE3C0C7163D
+:104FD000E7DAC37A2E642349DDFED35BEE214983F1
+:104FE000FF348170BA957CC37767B0C8D0CE315694
+:104FF000447BBED5674B40A8D168F0B773F8B57A4B
+:105000001D62CC2567B15F76068DF09E3DFCB1F642
+:105010005E479F6C05D76785378DAFCCFD4B05523A
+:105020000CED623112D4F3BFDDC1F8542A70C5987B
+:10503000BD9EAEDCC3DAFB6839D8C5BE8802E72F57
+:1050400054E4314ECC0572A0C3CF78DEAED5C1CFCB
+:10505000A3490CFDB582126B003E72154B783E6081
+:105060006EA7A51EDEBEE393EFBC8EF231C685F2BD
+:105070002128547E2CC6795C0C8F75D074B3181E11
+:1050800007A9E3943D6A2527631C4C8E5D9188E255
+:1050900062A12696F0CFE4FDF66AF0AB313CF7CA88
+:1050A00016FEB22CE19F99827FBA6316C2FF39487F
+:1050B000D3C13F8DC3534042FDB06F0706857E09C3
+:1050C000B95CD19FCBF5F07E0B387C84DC8474D343
+:1050D000CA3B391EB29DCFDC2CE7D3939A4F1D9F5C
+:1050E000CFC24CF3F9029F4F8F83AD57AEBA8812EF
+:1050F000A47C959F862ECB79FF5B87E972D319F14B
+:10510000D557B39CC7F2D43C9672BE5A96691E51CD
+:105110000E4FAF9DCC3902F13313F97A43EA0D7487
+:10512000D9AEF19593AD1B84DC6CA0CB3DBC9F6CDC
+:10513000E7B33ACBF96C4FCDE77B9C2E77649A8F1F
+:10514000AE7E13AFDFCCE50AED96ED8EBDCD607F70
+:105150003C2E46DA1DB352E3D17A1DFA7AE3DBBA6C
+:10516000B47A6BE1BBB078B85E371F9FDB450FE1C7
+:105170007EAC0D6C0C6ADF7CB1EDC55AB0C769BB63
+:105180008DD87F84AD9BB4DDDDFAFE67B6DDDBCC68
+:10519000EBDD07F59A2E3DA5F5BF59DFFF764752A7
+:1051A00083631BC25137DCDFFDFA7ACB1D7DCDEC6A
+:1051B0009CB0583EEAD5D935C1ECCE7D1C81687CC7
+:1051C00000FC95C4DF0B7647BB18DB3E00FC408D2E
+:1051D000BC9DF4FB6DCEB020D0F5530EC71E817A76
+:1051E000F9AA53B603DD6A633F82BC6A2311888B38
+:1051F000BCCF7BD776C8AF115DB23304F696824739
+:10520000433D0111E379DA84A80AEBE20931FAACF3
+:1052100003ED1EDA251DE7B60225D12580FF96088D
+:10522000CCEE60706DF05E1D07389C142E880F6EFA
+:1052300033C145C7C37D79E718166F4344522E42E8
+:105240007F764F08FAEB1F732BC21B6F72CAD03EDA
+:105250003EF95684979645303ECF1143783B1C2E3D
+:1052600019E2F1EEF3AEDA0CF1766BD45CAC8F7030
+:10527000C0FC279621FC6E124B2E2D05F5D51BB6D2
+:10528000013C8B258C4B8E0736E2FEB66B315DE41C
+:10529000E8B85DE51B5568777CB107E3EBDCBE5EE3
+:1052A00002F15605974904E280DC815EB433F317BE
+:1052B0007958BE98E038F99F67F1B20E322097D145
+:1052C000B420CEE28EBBCAEBD5A560C754B37854E8
+:1052D000A2865F86F8B63CC2FFECC5FDD0BF63BCBA
+:1052E0009DD84329FA16F40EB7CF8D5AC8CB70BD9E
+:1052F0004496F592D9D5CB8F8BD9D5EBCDB25E2222
+:10530000CB7A4956CF492ECFB58AF718E6FB7912EA
+:10531000DA1F5A7C5B0EB5FC87ED935266B7EBED56
+:1053200015079152F60AF0997D494638D6BCD51436
+:1053300038A0B36F02923F80FB8D0BC8052897A35E
+:10534000B43FD1A8060E38469F2F485852E7271F72
+:10535000ADFE5AB0F79CE9CBBDD3AF08A23E9BF699
+:10536000359E2E616925FD5E016903CF7F8DE7972C
+:1053700034842DC6AB91981E2E27918C747073F8CF
+:105380008FC2993F6D522ED2FA16E7E35AEAABB0BC
+:1053900099EC46A3BE73896A2D9E7394B3F8412796
+:1053A0000823C84D88A07E7190A45C86E78BE19CA1
+:1053B000A56353F2E3088E45F9F93F85762254231D
+:1053C0007D428047339F98F9C267E28B4FCB2757C6
+:1053D0009D253EF1C6ED59C98FB737CB7A892CEBA5
+:1053E00025B3ABE78B0BD9D5EBCDB25E22CB7A4997
+:1053F000566FEDBF48DCDF7A590BF861BC5F74195A
+:10540000F26BBFE831967FC967C8772F34B6F72DA6
+:1054100032B6EF5E646CEFBB8CB57FAAFDAB9782B2
+:105420009F275B39F9DDDF2827E5AECCF5F3178F31
+:1054300022572E15F7936E5121C900AC5F749D124F
+:10544000300D272CECBBE7B9FCBFE0607E9CB8A810
+:10545000E2BEF69F7D9E3F9098DF489BEF68F06A22
+:10546000FAF7F7766E6F99EDAF61BFCEC9D3A76734
+:10547000831E21102C4D64854E8DEA1B0FF1842074
+:1054800054C4539EC0F36973FF5D705EC7FC2EC1A8
+:105490007A1D1CCF3B995FE5E7A5ED413CAF9DBA76
+:1054A0002B08FBF4AE0982A59FE594C4CE05CBA2E0
+:1054B0005EB4333A1417EAC3AE09EC1E5397238146
+:1054C000FEE3AE52637B17B71F4E496CBCAE3B6325
+:1054D00004ECFFB6A9BB1A605C67F25F8942E1FE8B
+:1054E000EE8418C68FB63BD93EC0195609AC0B2EB8
+:1054F00045C5F377333C712D6E882482F5BA79D790
+:105500003B19DFFC9CCE279B79BD2B49585F0E339E
+:10551000FCA5C3D7DE33C4D7B54ED6AF127423BEB5
+:105520008E57135C4F8090F6D9048FC6D9DF20D1F7
+:10553000F387793D060A337E3B8D7945BC2A233FAC
+:1055400099FD30CAB6AF65E4E70EBE9E3BC9D7B140
+:105550005FA7120B83BEF35624C832C42F0993B140
+:105560009CEF14F8BF56D546E5977241682B6575D8
+:10557000EF98CE50D2227E6998FE1592515ECE7081
+:105580003D9BE9A4EB9937B59E1D27DDE884EDB678
+:1055900091EBACF0AEAD674AE0AA8CF3EE6A647EA4
+:1055A0002B42EE207D309F57EC481F5B395137501E
+:1055B0007A392B443CE7704E4A10A0B3AB9C24DDF3
+:1055C00039E9E7F51AE73B259879DC1E8EEF6E4E38
+:1055D000A774F5BAF9B9E76B1D0FB5C0FE2D6F1EA4
+:1055E000938361BE171306FE1C92985FA3CBAD3464
+:1055F000613C4B29F38F8C983787D32C57F134F7C4
+:105600006934B9FDABA4303DE44AA0DF41932F4596
+:10561000F957D4735D139A5DC0D471E541F4131F3B
+:105620002F9708DC8331EB032DD5ECC84B48B70B23
+:10563000EE2BAD7DC51EEAB280D70D44D0F9F5CC76
+:10564000FA7A347D72DFA7D4273FD1E47EA43E41AD
+:10565000FA5CDBD1BA1FE8D3E566FEEBFC3A952C89
+:10566000D5CDB79B8FBFC4C9D7856206479743AED8
+:10567000D1D3298F7EAFD1EBCD34F44947F72B211D
+:105680001870560A0EF3FC763959BD7C18BF627447
+:105690003C8CA403C3438BD39A0F3EABF9343BB38A
+:1056A000E3E36DBCDE368E576D5EA3C989D67F1FDE
+:1056B000C757DE3C93DE175503FDED1ADEEA4CF5C5
+:1056C0005CC67A1A7E4427B357B47562B4FEDF967F
+:1056D000187F98FB4F2787BF19964315FDB2DA381C
+:1056E0004EF21CFA0F8E53BDDC5549F7A3BE418C18
+:1056F0002FA07B7D8C6F82F82FBDDE35EB2F4DFF09
+:10570000A7D347E67DCB68F5A58094D14ED2EC9A1D
+:105710007C7E6FD2C5E381370AD6E73C435C8EA816
+:1057200062CF2AAE0FC244001F2442F8FDBF707F33
+:1057300013CD8F0D494A17F83FC4F9FD3B687ECC65
+:10574000CF9CA42B042E9779FDFD94DFD6865D11A6
+:10575000281FE72A1DBEA7D53B1BFC5ACCEE22F61C
+:105760003B5E877BC063AF1409E0D549E6609CF6D9
+:10577000F13594769523E1192B12323E9FA6DC3F3A
+:1057800080E787B0A5FC8A119F64B12E0F7E6097D9
+:1057900071DDCB76DE6678D2B51B159ED43EF4085B
+:1057A0008CEF2499D7B5339DDFB05D9BE5BCB4FB8E
+:1057B00068DAF7D2213B51E07EFB9080E939435E05
+:1057C0004C4B86DC984E182A200A255AF1501EA60A
+:1057D000E387C6E3F7A2A1424C0B8726621A1C2A74
+:1057E000C5346FE87C4CE5A1A9986EE072983B3413
+:1057F00013F3DAFDB79CA14ACCFB873E8FA96F68F3
+:105800000E2BE7E7A91BEE8C12F0574BB00E51F9A7
+:10581000689BBF1CD725F3BC36B8D83ADCCEEF095D
+:10582000B79BF4761F2F7FCCC5E47E03970B22C66F
+:1058300088DE6F7E3FAFB7A12C8AF677BBB61E1607
+:105840002E37AC87E6FAED69EE273FA395737848CB
+:1058500079FD28F461E7AFCE4014EF0D101245BD7D
+:1058600044C4A841EFB66BF067798F70C3FC6790B2
+:105870008FDD549021B4D0FD856D0D0F83DE5970FE
+:10588000EB7507A8DC7DE88CDEE68271BFB002997B
+:10589000EEFBAB6E0F82DF77C3FC7BF17E1398DFEC
+:1058A00010D7DCB1E08ED8C3C87551B4B369BBBBA7
+:1058B0005CBA73D0CEE5B737ECA2FD29AD36A2E8CD
+:1058C000F8B5E40E0F51F4FAEB644121B42FBE2574
+:1058D000DFF0BD686591A19D764F22784D99A19E1C
+:1058E0003CEF3C43BD9CB9338CEDF839B9AFEA428B
+:1058F000433BA74FC32B3B47A4F437AC1F1D823556
+:105900001D632EA62FD3F1CD152EB6AEA5FACF4C22
+:10591000B774FD677B2F24C51F69E781E710B1F8D5
+:10592000E279604F39E528DE5339F3FA67771ED9FB
+:10593000D633EBAB1CD05705A04F044C7DA0AF0A6B
+:10594000408FB831D5EA9DE97DDB75A06F7C3A7D4B
+:10595000338BCABD053FF8DC99F5CDF9BC7CB29B11
+:10596000E99B759CAFCC7C13E4F5D681BEA9185D8C
+:10597000DF04DD99F54D251FEF1FAD6F3A67DC1B86
+:10598000FD16CDB92FD8D6F0104D3B2A6FC53CD5AA
+:1059900017A29B9677CCBE23F6904E8F9093FFC9AB
+:1059A000F892F3436EB5517F68FDFB43263DA2C9D3
+:1059B000C3DF28D7A738BFA6A3CF914F29D7A7CE3B
+:1059C000925C9F7275CD83F3C56CE57A64FDB33B41
+:1059D0008F6CEBA9B5247909EC4BA678122DE0BFAA
+:1059E000B4F586D8BDBC28C6ED743EEFE07E1EE659
+:1059F000FF9BE10A2F02FE99E18A2C76D3F63797B6
+:105A00002AE3609DA6F92FC2775D3E62CAD79BEA62
+:105A10007FC594BFC254BF415F1E57947170BE18BA
+:105A20003FE4C0F3C1B862ABB3E2A7856EC62F876F
+:105A30005C9128F4776EE2BC7140179A5F86FDB9DD
+:105A4000597F347F8D29BF1CC74FE5AF3395AF30E9
+:105A500095AF34E557E9EB779E9A781FBEBFF14BBF
+:105A600007D969E14F7A95EB898EC9B7479B995C55
+:105A7000DE06ED3BA6DC115B46902F08C06DF79962
+:105A8000F67F94CFF4FC7288F7F3F309B7E2BEA96E
+:105A900083EE9F308E11FC7816F8F9B59BBFC3A535
+:105AA0005C8FF71FE28537A39FA3A3B819E3148E79
+:105AB0002B129ECFC64BADDB7736323F5347B1F545
+:105AC00039C2AF210857678F9049CCFF076270DA5F
+:105AD00006EF0931FDDE56DA8EFA554A5ECFFC1B21
+:105AE0008551F46F3CC8E927F962E8577016C72C56
+:105AF000F7F51DC3F830FA35F769F8E0FB481D3EAD
+:105B0000500E9B3B3F3C00EB6BDC6D2D673F7633CB
+:105B1000397304B31B7FE4FCD9FAB01D2EB558ECE1
+:105B20006BE30E1627AF4E607E00918EA3F72B9885
+:105B3000C71B9EA7699FFD00C753DCCDE2ECB5FEF5
+:105B4000CCF03CC2EB3DE2667E056D5EA2CCC61990
+:105B5000ADFFE7E0B216F80164B31FC2A8E7EEE0BC
+:105B6000F51D0163BD74F8B973183F2C1E4BE3DFBC
+:105B7000D1F85D1BE710C085FB59EB7DB872B21AF6
+:105B8000E3378E137F6F17EC9B45F97588E3B88D6B
+:105B90006E93C0CFDF22AAE85F501522EFC4F34F07
+:105BA00076FE709BFDBC10E83B178FAB20105711A1
+:105BB000D0C525829FF35C8CB37804CAD7A84E1950
+:105BC000DE3719724F6471AB27D7603C4527DDA9DA
+:105BD000C3B827DC250978CFCA9EDB8DF6BCDD5E15
+:105BE00019B38A33153D8C6F2F39B91EF56CBBC2C2
+:105BF000EEDDB48B51577E05B8AA5594D74E257368
+:105C0000FCA2390ED2219BE30F8DF89AE661F48D48
+:105C1000F3F537EE0E35E8E393821E37960FB98D14
+:105C2000F075007C3E802B86F1A4F1629B0DF0762E
+:105C3000B6E0D3C6954A6D11C04B8044315EC515A0
+:105C400014715C9B97E137DDB844113FD0BF1F73DF
+:105C5000B6F039BCFE46193F89C483FCA4CC73D589
+:105C6000EE86FCF3CC2F6F1EE788277A8147E71773
+:105C700016E528FAB7B4FE168E6171DE6231C1FBFB
+:105C80008A1289D495D2F9B714B3771645DF2871F3
+:105C900011C5667F45BA7339763E824554446BFE22
+:105CA000C0C6F5F078013F19C060D15C50E91321FE
+:105CB0005E4011D83B102181C595CFC538F280FBDD
+:105CC000B3EE7709F62B843790D3DE33E8571C40C8
+:105CD0003FD767DEEF28F0BAC936EC1742534F17AB
+:105CE000A4FA05FD8B4EA593A74FC3B9999D687F74
+:105CF000CC0E176DEC5E1529CAC1B8C3B6C0CD2E47
+:105D00003D5D9B3C6586F55592DB6F1272E0DEE7E8
+:105D1000CAF04006BE6C0339023F62F135E181F200
+:105D2000F4F53438453A7D2B7F68BB144D3481BD82
+:105D300058E263F1AA620CCF473A84FC195D553AE8
+:105D4000FE2D96920097BF2AAC423C6347812D04FA
+:105D5000715822E93E8CEF3BD9178732C9AB582CDA
+:105D6000BEAF9FCF568F310EA465147E6FE3FA3A13
+:105D70005DB9430A45ADF4F0131EBE8E79ACCB3F3E
+:105D8000F6D63EE6B15877F6723DD5914755E9E72C
+:105D900018FB001F88C5075F073CB48D5990593F19
+:105DA000C946FDF45FDEF04F609C0C703C67050750
+:105DB00081C714B2B0FBE579188C988A070A30BE07
+:105DC000863820612C9CD2B2BF75550F26C1EE7665
+:105DD0002CF585817EF6F06E02EBA81617640F7B1A
+:105DE000DEB1213DE7B2F8A072E6670DD3FF308E39
+:105DF0006C6EE6B831BB29FF2B339D1B9FC5F72284
+:105E000034F8B53875F3BC9EF2D6BEED9965858F32
+:105E1000ECF6419B28BF10CA2F1BE9FA4E91427A3B
+:105E20001B65CCF7340631DFDDA860DADA588EE97D
+:105E30005A683A07E23F62F152D88F041F0E5E4B58
+:105E4000AB6C029A605CCB8EF9B08FEC1ACE135516
+:105E5000807325B81F4FEDD0BF7A36CEE7E76C3C94
+:105E60006EB67D3E9EA30DE7B7B4815DD8C5E368ED
+:105E7000E5B50FCE87FDE3A609DA3E39ECFAAACEE6
+:105E8000FE9AEC75B073A652AD7D4B1BF4E7167904
+:105E90009EEC996FCC9330C0E376B1FC42EFD3080F
+:105EA0000FAA003ADEE5DE6730BF6932F73B54D413
+:105EB0008F8247E6C768F728CC0EAAC8473F8514EB
+:105EC0000AC1F502B2298FC39D653FB0FFC1F5EE4F
+:105ED00015EBF5322537A3AC6B1C8ED1E84FD18181
+:105EE000F605E86115C67DD58EF270B6C7DDE438DB
+:105EF00033BC48D5832A5CFDDAE7895EE4A5EDFD75
+:105F0000E1BE6429CDE72C4EAA28BE598E5BE8E598
+:105F1000F7C9E87C41FE353C6B76C74D40C731A9D7
+:105F2000FE1C8130BE23E1E6EF09670BEF728F6C38
+:105F3000E8873C5E5B98E9DC654CC4064146C3FAE1
+:105F4000A2A0CEC38335583E2F9C6FC8E7561719C1
+:105F5000EAFB43658672877C9EA1FC6FA5D3D73D83
+:105F6000B281AF23A679CD379567DBAF7B8D5D819D
+:105F7000F7204B45CD1EDD88F7928F038E413FF60B
+:105F800056E23D5D3249BB8740C210AFE256C2C8FF
+:105F90009F1E12C2755A2A36DAA962C068A7061B6C
+:105FA000D4A4D62FC425B8D74838EEF03AE563F12B
+:105FB00020DA3919EED72782AAFBDEA152D6CE32DB
+:105FC0009E414B457E5E8677EF4B473F4F358F13A3
+:105FD000FC4AE63835737DE21395A33AF94BDF4E60
+:105FE000244775EF6AEC00DACF4AE13FBC7B29FA1F
+:105FF0003D9C84DAD114CF2DC12B4894CEB31DAA79
+:1060000050FAC521A57CDE1E9C21631CBEC2E86A35
+:10601000733139F98E5731C473D87D4C4EB47AA39D
+:10602000D1FF363B8959AD67AF7AD93EF9C45DB12E
+:106030003FC1FE527D99E03BAE7D8D43F8CE655564
+:1060400072A11DFC26AF7BC7E27CAA0E84ED97EA05
+:10605000FAA922ECBD6FFA67D7FB5335FF3039E957
+:10606000C2B8E03D491617BC27F9DFFB4F43FE904D
+:106070000DDF15DD7338B37DD5C7ED2BAD5EDF21A8
+:10608000B65FED1389373F939DC3EFBF55264D7122
+:106090008722B103FD4FDCA9D8C1DEE96B7409B0DA
+:1060A000EECFE0F3AC4A86EDB09E8E36AF7D26FA99
+:1060B0006AF384FB8730CF561FBB0FD82AD3F9224F
+:1060C0005FB3F7B2D3C13BBCEF97ADF121F9D9BBB8
+:1060D0001792232A5BCD7BB47B8A1A7CED009F004C
+:1060E0002983AB3DC0E8D01ECC4C87160E9F56AF1F
+:1060F00035C0E8D04AED836CE0117D4678A88D2745
+:10610000805DE823893A7CD34C252FC33E08558512
+:106110000278D897BC1FE0857B1760CFE75509D779
+:10612000C2BD8F28B30FFD55C9E4DE009A2711B810
+:10613000975130D09F7C9B961F6CF0E2634FF2B575
+:106140004792D08F280FA2FC74C160681F4D6C0766
+:106150007BA70DFE4955FAB8EEE002B03F44C2F409
+:10616000029538451CCBED130B79D79DEF0BA79DFE
+:10617000A976E9F066B63B9DA43EB3BEE2E7FD2AF0
+:10618000FD0FF48D6CBA1F61B673CD71F017813EAF
+:106190001F93C53D8C4F394E2E79D005EF21D8CBBA
+:1061A0006D32BCC34C557A1EDCFFF1864502718D01
+:1061B000B9BE017C3A6B34BC53FD57C7E246FB883D
+:1061C000FE1E69BD8FF98102F55582C0EE1128F0DF
+:1061D000EE66A0FE50C88A4F35FE1CCEFB9E44FDE5
+:1061E000D8461271883B51EB6CB8AE759597E5E9CE
+:1061F000F74737F904BE0FD5E84F1471768AFE745D
+:106200007E61F7F4BF1FFDF3171BF17EA674B9D3AF
+:10621000C7F4D268F4FFB4E368741B291F4D9C6E69
+:106220009B50FF754ECA4EAFA4E8F620CAABB79C90
+:10623000841316ED9A39BDCCF7F65D2446E0F728B5
+:10624000ECAF307BDA3E6E76C30E92812E23E2AC49
+:10625000583F761FF3A7AD133C21186A5D1AFFF271
+:1062600024BFC0F5FF008BE79B733008E7C7DDB3A1
+:106270008E06E19CA3E713EB73C8857E7E2E127E0B
+:1062800003F7013DB3985F10FE40EFDCC6FE49CA3C
+:10629000D4F736C33B66EBDEF21AECA1F6C6CCFEB1
+:1062A00006A9E8BA28D81927DE1114586F84A23538
+:1062B000E7025CFD7396E3BB23ED55FBF01CA63BA8
+:1062C00094992E5A9C6FBB29DE36DDB9E1092EAFB9
+:1062D00065EA0D685FF614BE8CE3ACABCA3C0EBC3D
+:1062E0009795299ED7652351F4179BCE75DFE4E37C
+:1062F000BDE9E3E7138EC8972696C2EF72A8E81FA0
+:106300001B5B1EE9B751BCD5FBA3AFF9285D7BE64B
+:10631000DC5A0870C03B317ABA07A07F0BF8C6FA86
+:106320006D06BBE94459ECBFEEAC82DFA79882EF63
+:10633000D66BF5BAD3C4B19FA7D15971E3BEA71DDF
+:10634000E2FE297CDD85D9E15FA3F325E405D7448E
+:10635000680F71BE19F8D9BCDE8F8677331E7A1CA0
+:10636000031807D52358CF67A19FC95DCF9D4976F4
+:10637000AE36E7289EABF9926F60FCC477671DC606
+:1063800073B5123FA387DF378071A539D5EC3DC0C7
+:106390007472F400A79F281BEB1171C070EEB3DD7F
+:1063A000C7CFCB0299FBD3E024AE0176DE33522E69
+:1063B00071FDD9D9FDF0417C378524F15CA1FD55F3
+:1063C0003BDC4D1DC6C308B98AB3DF85E9818DC7A3
+:1063D0008530CE5DEDE027E9D1CED92AD9BE49ACD2
+:1063E0004AE2399BCBAF18E3AF43DABB88D9CDD3B0
+:1063F000076B11F30F8BB0AE823F1EE06BADBC029A
+:10640000FD69E9E8FA1D6F74A67F8CDEAFCFF65DFB
+:10641000FF6C7C78C2A718EC43333F3AC937CE688B
+:106420005F97CEBF7C82CB67002AEAF649DFF44B48
+:10643000D6F87DFBCAD1F0FB4D6BFC5EE501784FD1
+:10644000DC63FDFB445ABAC5A4EFB668F128F0231B
+:106450002185D85FE9E516F3D6D6D5137EEDFD9EEE
+:10646000A807D68D3275AE07C6DFD5BDCC03E3EEE7
+:10647000DA9C999EDAF8DBF9F96282DF77D1CA13E8
+:106480009C2F7798F4FC2B5CAEEFE7F2B5CB15F1BF
+:10649000E0EF55ECBF6AD1548ABF32CA17E05254BC
+:1064A0003A497EA6F14B55D3BEE40CEFB5F4F84D56
+:1064B000F1BD59DED3FCB478D901FC7321E0E1DFF2
+:1064C00051EEEDC95C94A7B2958C6FCAAE194CC25F
+:1064D000BE76E2265B42C1389628E2A570A5A86088
+:1064E0004C1BBFF77A2E5FDF89FD0E5B0994C3BD9D
+:1064F0007119DC2EF2D7301E669BF1F73F76B9C2D8
+:10650000CD12D8BF718C742465DDC6DFCB184F74F3
+:10651000BF5741C72D7CEB3DFCFD9442D3EF827CFD
+:106520005ABCEFFD07E13D21128F5E1F2B028958F7
+:10653000E9FDFFE47CA9341D60EF18C47CE45DDD57
+:106540003907A55F3ED805DBD58D35804F354E42E6
+:10655000932DF4D86FFD5EED777C0EC03B0B8E6201
+:1065600076FFAC6DE915037BA9CADA7E472DB13AF7
+:106570005FA17AE1B77E5C9F985E48A8F52C3D69E3
+:10658000473E99DC4D12F03B28F336C5FA1D20EA50
+:106590002BD93BD48571559068BE8C9AAFB47B32B1
+:1065A000F13AC2EA2F218930F211792D3836F57B84
+:1065B00027250337F5C3BEF820DD17C3EFA868BF52
+:1065C00057A2F1CBF898913F26C78DF971267E31FD
+:1065D000B72F53C822187F52B78DC0BE6E4C83AE02
+:1065E0003EF44706DF7B848E3FF9003CCC48D3DE87
+:1065F000CCFD8B24EAC8A1F87CFA2EDF2FCBE9046E
+:106600001FEAAE2D00BCEC721176EF22E2C27717C2
+:1066100048C4FA3C6904DF6A767F9AFA297DC9EAA0
+:1066200069EB5EC75B027BE7A2447EA714FC9CAFCC
+:10663000B1DFAD4BBD5B7121BE5B112431663F9272
+:1066400008A6AD9C3FE54B8B4BC11F1A7FDB2BC3CC
+:10665000FD2CB9C0E84F13F3EBF03DB061BB3B9F9D
+:10666000DADDB43C9E67D4A33539CC6E0DE5B07B42
+:10667000A1B297F5435C6AA15EEF6FCA118CE53E4B
+:10668000B5F0CBBAF25ADE3ECEDF2DBF24675107FC
+:10669000D833F2785ADF823FE7F171B57212081DE4
+:1066A00086F73F367FA37E967E3DDF94C3CE77E4A8
+:1066B00073F8B8C5D670C54BD9B877F37137E518FC
+:1066C000DF8D23324BB5EFF7FA6F158E507C9F703C
+:1066D000905A88576919634BC0BB69B78DD5E2C220
+:1066E00032EB098D0EC3F896593C52D175F20CBBB2
+:1066F000851C6BE9D63AE6A7327FBF9ACFA3F5BADD
+:10670000DADE4914AEF0012677CE00B13C07A2F2E2
+:106710007D75CE2C8B75BFB50EF77127F232AFFBAE
+:10672000E67DAEC8FD8BE67A4D9C4ECA2B417C8A35
+:10673000BB35C8FC895AFF270A995FD1DCAED3D498
+:10674000BF9BD48721CE18CE57E15C559A4412499D
+:10675000DA8F27D02B972A101F705885FD91422879
+:106760001EC1CF162268D7B506D97E540CF6D6D8EE
+:10677000209E84D4C97A3BAC88FFAEA29677F8A25B
+:106780004D39680F8505C48BC8CEF34F38120B0105
+:106790009F2DA53662F54E7F770EB373B72AF52F7E
+:1067A000965AD06F438E62B09F8B8698FD9DAE7EC9
+:1067B000AA1E836F981F832ADE3F200AE3C77A7FD1
+:1067C000F89E1CABF35B4DAF703FE4B26AAE7089CC
+:1067D00072E5AFE93CAE3FE4C0D8F44B4E6E3F08E3
+:1067E000FAD74EF56F17FE8E5CEF41F0435E03F76C
+:1067F0009F68FEFAB7A64925B4FCB5223B7F743EDC
+:106800009203E37E486CE82FF990BC9C335347BF5A
+:10681000A77224B6DEC41DA847357FDCB5BD0E8344
+:106820005EFDF666637E39A91F0B7E8AE59B1C24FC
+:1068300041F17BBD49EF3E94C3CE89BE4D62EDB0C0
+:106840007EB6F1F3BF1B7F324D02B9B97EA65C6AFA
+:10685000D7DDBB7A2E87D977EF533E527472B6C21A
+:106860009790601FF7EE9E99577C9E403F89F622D5
+:10687000F0A7E559C7017E2B6E8473B47998E1D6F1
+:10688000CEF3D2C121EE162CFD42CFE708067F7C65
+:106890008B8BBD87146E1189FB6288C3A3020B70BA
+:1068A000BFE5C7F7BBD5DA18C6D5A9CD4EB9258047
+:1068B0007176184FB786120CDE1F3ACAF94F8BABB0
+:1068C000A306C505B04FBBD13520815F79B518ABA4
+:1068D000839F4ED3CE659C8E68783C85DFF16C4DEE
+:1068E000723C31D48B6759EF90509655BD3A5B8618
+:1068F000FE8E713DF98BC71F9260FDF9F0B177BE36
+:10690000087278C373760257F38E3DEE2749DC3F59
+:10691000242490F3157BEC96EF48508C61FF37FCF4
+:10692000C88F7A71C593CEC462DA7EC533EF4E2725
+:10693000549E8E350F1E1C0FF87B4C60E785EAC015
+:1069400074589F5688E49B56EF8EB97399BC7FF0BC
+:10695000536F03D04FD8DD7F35F6DB77A543FF2E8D
+:106960003EC965EB0FADC7E2261F1512932DF487C4
+:10697000B61FFAE0511657B2E2594702428257EC6D
+:10698000DE2145291CAB777F84FC72E98F9EC8010C
+:106990003CAC7ED66EB0236EF8D127ED17523ADFAD
+:1069A0006027838B418EED27317F3CEC1AB4A35CCA
+:1069B000B3F89455A80268BDA77EBFE0D7B4FCFD2C
+:1069C000A09D4088EBFB877F273D07F9A88F5A6E73
+:1069D000D0BF91AF57EF7E57C2DF31B291C1E2CF46
+:1069E000C3F987D14E32D7276450023DB5BAAFF311
+:1069F000233BE5B7D57B3E7C13F86EB5493EDE8779
+:106A00007F148EB4CF2B734DF6F9EE82ACECA31B42
+:106A10009E38FE00F8233E78F28F0FC03DDA95A72E
+:106A20003E7EE07B1017F66F6E19E47BF563AFE6F0
+:106A3000109DFEBF2C97AD9BC71E7D64D7563AFFB5
+:106A4000636F38115BC7F6FEBE04FC3FC77EFCD700
+:106A5000B1E00FBA65EF7CFCDD9A5B9EBE745CA66C
+:106A60007511F835A1FF7D457E6EA43C2B80314920
+:106A7000C8CF786AA207E91D94605DFB8B4006BB16
+:106A8000F2E8F7BE4F24B0CF0E86C920E067FF9E24
+:106A9000770FDE4EF31F52FA382DE843E73FDE86CC
+:106AA000FA998A0D4D57EDF9F2972EAA82D4817684
+:106AB000F86A32887A73045D5FA174AD4AD1D55CFF
+:106AC0007E9C9C94E0DC60F5E3948ED3819E948E52
+:106AD000D347D2F143F8C79C91745C916B8C4B3ACD
+:106AE0004E566EDF0A857B0A2CCF79B57DD68D4F49
+:106AF0007F35A3FDA4E985D1F07C9DC0E09A9D1B64
+:106B0000BE3D17E4EBC91FECDA1A60745E4C1173DA
+:106B1000EC89E32584F2C91F1C8357031E06F73A4C
+:106B20006558DF57ECFD15CADBB1A75F92148C6F77
+:106B30002139C26C9A27C37F2F139A5F25B0CC8D61
+:106B40000FFFBF056FD2F637C2431E32D20FF307D5
+:106B5000A9FC213D1297D729A077136370DEAB12F1
+:106B60004C2E5625FABF02717D66BC3F956BD3F45F
+:106B7000FF305D216E6CD59E771600FFA5A3A7366A
+:106B80007F19E67F012D7FD828B769E594D3F7D820
+:106B90008E1312D807C9E724D946EDE1638E410967
+:106BA000D7C71FDBE59DA191744FE19FC71F9DE1F2
+:106BB0003EFC876639E7F8194DCE479FD799E16DBE
+:106BC0005BAEC2F65726FC7D70D25AFF3FCFF5C6AA
+:106BD0002A12AB2B9A3872FD1249441D5F9A82F734
+:106BE00003881FA3F07EF0981DF787ED7DFB518F82
+:106BF0009BF5C5AA3476F49BB9CC1E58F56CFF748E
+:106C0000D06B1FECFB29F2E5AAC7DF91C07F737040
+:106C1000F753D240454A0E607DD0FF0ECE073FECC1
+:106C20009F0EFA6B759A38C0DFF3F9ACFE99B1FF8D
+:106C3000D58F7F64E8FF06B54F423FD928E3BC2FCC
+:106C400086AF84F9BE7FD8012718E4FD3E7B9D9571
+:106C50009DF3025F1F353CB5FB67BF9E0BE75EF9F6
+:106C6000EC1DC6D6A6F0AFF0F77B5F72F0FD6DF8B5
+:106C700075B0675AF224BC8FD0EABF02FDF55A7F87
+:106C8000BD267CCA01B906F603F2BC48957E5FA515
+:106C9000C19F17B619E0BFC55F374EF1B1FD9942EC
+:106CA000F71FFF03B64D466E008000000000000095
+:106CB0001F8B080000000000000BD57C0B7C54D516
+:106CC000B5F73A73CE3CC24C2627AFC9D37892F0C1
+:106CD00094804312DEB40E0491226A505AA9F5AB97
+:106CE00003F28821C9A4F8E25ABFCB8444F4029F7E
+:106CF0008D95166A693B70A152217690A0B10DDC8A
+:106D0000012C06056F105F78B18D5A152B24631482
+:106D1000B4575BEF5A6B9FC3CC9C4C84DEFBFBBE2D
+:106D2000DFEF0BBF76BBCFD9679FB5D7FAAFD7DE02
+:106D3000EB0C28DEDCEA5400D93D6B366461AB5ABB
+:106D4000D41409E02BFABB2AD6028400C603585D8E
+:106D5000D5E07761AB5A407300FF7D45FFA7785BB4
+:106D60007BF0F97BE5D4D6B5348FB5F157D48726BF
+:106D700005B657F2B0914A25DDBFC2BBB61860A375
+:106D8000F39F1FA7FB2B8376D58E6D73EA3DBFA5BE
+:106D9000FE0609AA65EAD3F3383E6875A8DB55BC40
+:106DA0009E0E0BC265317AF25424321BA00CE9A06E
+:106DB00016FFFC3001DF2B488266A8031C0129590D
+:106DC000A120B5C6730FAAFE62757CAC2FBBBAC1F9
+:106DD0008FF35E2DBB2CB4FE07732D217B31B537AD
+:106DE000A641D9403E18ED03ABAA213262F0FBADBB
+:106DF000D98E855B80E90E5A681D9223B49D08F1F7
+:106E000081A67A8069030DFF873C74C4D18D037C11
+:106E1000B40E45BF6FC565D14D3B04B94D213960F6
+:106E2000EB84084029D2AD96B05C52A1479F240A5A
+:106E3000D563006E4CF57F93D6993BB451A2EB1EFF
+:106E4000A8E6B612FC12DDB738EBF2FC5FB33E5891
+:106E5000A09CE919A9CB175FB1C12AF8AF28A00CF3
+:106E600029273A36ABEF8FC679E87E268D0AB21C09
+:106E7000C6557D67740BC181888FE3F32333676444
+:106E8000126E8C71CD8EA29312F2DB27A7A8294532
+:106E9000D8579033C4A753A9CCA71F4DC399F1FE6F
+:106EA0008F4FA56E95511E8F48024F41C213E10AC4
+:106EB0001A1F277CB8113F6BE9B9198DBF65BC5803
+:106EC000A0BAB952E7A487F827FE106F8CA7958A5D
+:106ED00043B57B89B73E4DA1796C105A2B11BD7E0D
+:106EE000E6A7035AB91D02616E5DD0CDED5DC4E722
+:106EF0006C928397FB69D0D33A149F9BA356D7AA71
+:106F000078FDC7B333245A9F0B549DBF8579D41F96
+:106F100094BF3391BF8E187FEDC44FE7407E3A4057
+:106F2000653EA47BC1BB761CCF0B115CC723D3216C
+:106F30002433885450112F39FA3A33C127117D84F4
+:106F40001F5A5FF602B13EF3FB72A195C7E5439865
+:106F5000DB42E8E636C3A14A0AD3734A97EF3BF017
+:106F60009533468FD1DA09C138FFB9429CBF98B931
+:106F7000ED963CB47EE3AF9A71F887CA83BE2A1CB3
+:106F8000A7F85D3E3B2EE5FF54CE201082F572053A
+:106F900048AEAE9E8573C18DC3BD36888CA4D9839F
+:106FA0004C5FCA48D137EC8B1D051531E8C7E7ACFB
+:106FB000A73E3C45CF59216E1CD121DF9A467C7FEC
+:106FC000982E4C1EC8F795A79AB29E8B9B77AB9ACA
+:106FD0009A45EB848930F12B39F63C4CCA40233377
+:106FE000F0F9CF5605B39EB3C6F8D0E2F867C6A550
+:106FF0000F019CF24DEC138EB36238465CB29D0BD0
+:10700000AEB6ABCD598C43C6E94A64901DDBCF5276
+:107010008A42BC7E689C7823DA618BC3274978BD9D
+:107020004E7587883FF5AEF02CB61326BB317DBE7A
+:107030001AC9C7717D8DE025BE6EDC73C369E26B32
+:107040009F07347BBAC0856F02D909C38E8026A3FF
+:107050007CD748E31C12B6F5ED1FBFF47B1C9FD212
+:1070600029838CF7FB70CDDDB46EC5974E4274C298
+:10707000FA04FD6E7608FD31D669D6D77F749D2857
+:10708000799E9FE52093FD5DFF2FF47C3FA4B6D24F
+:10709000F84D0ABE9AE6EFB286B6231F561C911928
+:1070A0006F2BDAA410909C152D8DFAF7BE2883C0A3
+:1070B0001FF0FD7B7F55CA789461F48FA6E1F381C0
+:1070C000CD562F5A4C48F725FAABCCD943408BC349
+:1070D00001047D2FE722BF16EBFCDAE87C780BD1A8
+:1070E000B3A949F8A7ECEA8C84F19FA55C6F5B8A91
+:1070F000F36B7948D714C24DE7F035D85F5E20AB0B
+:10710000329A889C05F989FEB1D5FA0EE99F86FF6F
+:1071100008DF86FD5A4AF68BEC907C3FFBBF73205C
+:10712000FC9F02C2FF35A0BD8AE07CCB3689E78D8B
+:10713000F96A3A1F595380ED1DA1C4EBCB4189F583
+:10714000D9CFBA47921D580943BC766920FE2DE974
+:10715000887F02890B5C420E2E2FD997FE5764AFB1
+:107160005DB082F595F84E7644EE19B1711ACE17DE
+:10717000E8B24248237989FBFD9BE550B038A61F51
+:10718000FD5D7B981FCBF2901F884F7B6E22FF53D3
+:10719000B444FE3B47667CAD3C52BD267ECA739923
+:1071A000FFC86FA0F9D32695243EAFF37B24FE13CE
+:1071B000FCF6319D4B3B24784C223EAF3F5CA00D4A
+:1071C000E46B43C72336D2FF8BF1D5CCC7D1E9BAE4
+:1071D0001DD1F9780E3A0FE8A8AC7678D894F03A39
+:1071E00014B5753AE1B410F5967062D66B837FD60C
+:1071F0002CD567C37197D1385C5FBE232C94D10B1B
+:10720000CA09C2CB2261779B551FFB23C3DE3A2FED
+:10721000D8ED77E12B6CB3E6553E4438BA534A6D4E
+:10722000952B07EAEDBA31F7B0FD2A5C8DF698FD93
+:107230006A629C165EE5F02E467A9E5C05DEC5C34A
+:10724000009E5AA5726B8EDF0C7DDF8CF19B5DF882
+:10725000679E5741FCAE55C9FE7855A2F3611BB03D
+:107260009EF69541682BBE3F1CF9D4A391BD2E8F8D
+:107270005E5F8DF145600954539CF1AF1922AE7BDE
+:10728000466F6765D8B85D5B6D011FBEA7B7530E2B
+:1072900049485FAFEA3B7215D99D4EABC6F1951ACE
+:1072A0007DE97B7CBF425D8BFCCCB3B48EA3F7E25F
+:1072B000F8D9219CB7AFF35DF7ED717EB9B7E3D193
+:1072C000511407FDCC0235E124F1D0F2740BC73123
+:1072D000BD23DFF1E0B2A1DE11B501E2E9C19EC636
+:1072E0006A8AA7EE746A4C97AD7D7AA480F1338FD9
+:1072F000E3E3E7960E61BCED3D0321D2BB59F2AD4D
+:10730000D78EC1FEE45715AF9D95CA77FDC2093CE3
+:1073100084E5BEE1CB8A4DC4BF00F273355F6C3D9E
+:1073200041F27AF6CF0A90DE55363EFDAE1FD77990
+:107330003817D1300960822F5C11C151333BD3A77C
+:10734000937E074E01EBEBF86E2501B720D71D2A7F
+:1073500020BBF286080F27BE61BA0F4199E2FFC930
+:107360003D89D7A75E04EFFF62D80D377808EF8F0D
+:10737000ADEA8077C92FEAFE331F17988C9F06BEAF
+:10738000F738673C922EE2769970EB55928F7F2703
+:1073900043C4F91BBE9425C2655F14BCAB915F7DED
+:1073A0008BF379DD7D9F524086ED97F2EC709278F9
+:1073B000EBD7E93696DFCF6C02F73F5BEA0A35E19F
+:1073C0007A0E2EADBDBC07DF77FE9FFC97AB5F1733
+:1073D00007A369B14C6279A511DFEF9CD722B11EDA
+:1073E000426B1EF1CD3CDED013436F0C7DC95B3A7E
+:1073F000C41F4AF29EE1B43EA46FC6D291928D7032
+:10740000BB5F029263EF6AA4EB6BE2C720AC2E2055
+:107410007A021D9FD8C85F3B3A255F28C9F8C3E9A7
+:107420006EE65FEFEA60D354E4D73D8BF059D20BA0
+:107430005B6B71B2F983B0A1008343684BD704EE54
+:107440001D701BE92528AD79E4B77B3BAABE4576C4
+:10745000FD31D4438A1B7E66F532DDC17A80EDC4EE
+:10746000160A3CB15F783D6C591B974776A74F3F92
+:10747000958EF39D4A5779DE4CBF5722BABD7FFBEC
+:10748000CC4DF3F77D6E67F9E5930EC7C56D9FA6EA
+:107490000BFEACC9F0BDC678A9C96263EAF5BBBDF5
+:1074A0008B2B00AEEC407EC7E13226B720AF3BC34A
+:1074B0001F647A32BA3171E2FCCBA751BC1CD08D6B
+:1074C0003344245026C4EC73A5A3305220F28770B5
+:1074D0000EF237A3E6C76CAF53D00E53280EDD89EA
+:1074E00079115B647C9E749FEC42B32AE2AC967483
+:1074F00061E75A1E5142CDF8DECD4A4FCA306C8B3F
+:107500007DDA0C45237B5FC6F3E6DE05ACDF16476C
+:1075100048223BE42CFD45FA85B86B2AC0EEBFC972
+:10752000CC7FB39C46EB7AB126C3FF05F1756C574F
+:10753000F420856FDE14C824B9CE925DBCEEC96715
+:1075400085FD31DB1B39F2AB9F91BDE9D3F3A72455
+:10755000F6E676F2AF86BD01B9EC10E167EA8B7A08
+:107560009AA9DB19CC3E980F138FFA9B5D49ECCB9F
+:1075700024A84E43165FD4BE98E588C1FE857E21BF
+:1075800032A3A20BF528EE79B33D2AC8D0FDAF6E29
+:107590008FCEC1B49CABB5185ECA577A0FD9E3F051
+:1075A00061D8A1185E428C33F37B24705CE8ABA5F4
+:1075B000643F8ECA696477A6A3DC71FE2E5D4FD24C
+:1075C0003F0D7D8BE4BFA1F39A14C2F5535D550EB8
+:1075D000529B15B9B2F6678C9F9503F383A0C385C0
+:1075E000EC9DF15E2B3834D748E28785F920ABD883
+:1075F0008F7B7F7FAB349BEC220A2D6DFE98C1ED13
+:10760000C18A5C1BBFE7A9AE9234C2910B30BF4563
+:10761000F955764A1C2798716DC67133BEC0C27980
+:107620006335C713B214D6F71D12F3D2E2E064F645
+:107630005377611E4E716B7F17FA2D6C9F423F4F3F
+:10764000714AB36B16AFDB58AF41DF5DA93372A04F
+:107650006CE0FA8D36F0B90CA1CCB8BE12B5118E23
+:10766000039FDB12AE1BFC1C8C0F063FA7103FA52F
+:10767000FF3E3FA76608B99AF9FA3F5D7FE18A4964
+:10768000906C5FE0FF97F54F05FFEF7B44BEF55A26
+:10769000AE27664F0A57CC9697211F26503CEE8D99
+:1076A000D90707FE237C8DED68657B3309ED0DC599
+:1076B00099057561B62F137345BE64B61B5776C224
+:1076C0004D641F2747302EBD04FBF129FD471EEFF7
+:1076D000E3FC3203E91EF7FC82E5BBF0D2580D3221
+:1076E000E7E27BC6762B5EF27BD09D99745FC0EC9F
+:1076F000378CB8D48847CDE38C78D4F0270D3A1F67
+:10770000FE3DC3FF64065D57D520E91BEA55F831FD
+:107710002FC35EA378A13BBD7A37DF1F190E721EFF
+:1077200050022AEDEBA0BE721C56E97045E4B1038D
+:10773000F5D369D2C330F285F609822E4B689834AE
+:10774000900E0CB78314F7E103FCFEA5BABF28C462
+:10775000312CB406E0F8BF702CF8C9EF1696638B95
+:10776000EB3CA6C7232F995AA4FB79E2AB5581A025
+:10777000BDFC1FA797482C2827FEF8FE40EB77CCCE
+:10778000F631FD052A78298E2F50C29217DF9F51BE
+:10779000A7491736910C3F8DF315CCD5D85F160C41
+:1077A000C53E8DA77827895C7A32ACBCCE7A47CFAC
+:1077B000611BF22130B771B6DB128BD3ED56BFAF30
+:1077C00080F68F3A44BC0EB4DF379EED9244EB5105
+:1077D0006608FE0454915FB94065BB59A9CBB1D28C
+:1077E0003197F777C827DA270F5CB7A4F97870FECE
+:1077F0007CD082936376D5C87F701AA0F798ED6A23
+:10780000DFBED72F0BA23EBEF5BF3F4905BCFF2709
+:10781000259A4AFC387DFF89541FF2E3ADFB45FEF3
+:10782000F27D537CA4640AB92ECEACFE82F87ADBDA
+:10783000AABF4D88B72FB0329BF5E28E904CC9F0AD
+:1078400005FD59BEC3C97BCF46BF3E9C99D037F4D6
+:10785000A0DE0E8DC9E2EA6999222FBA63D7161B02
+:10786000E5D18B33FDA999D83FADC77FA7DB53790D
+:107870003FC0A067D1AE7136E2F79F3AED106103C9
+:10788000D96D1572F65D2F4DA0CD7BF167A6F3F093
+:10789000FE021BED9F2F91202AF6B5E0F0CFB1FF3D
+:1078A0005EAE0C6BBD03D7B1E42DD56641F92C99C2
+:1078B0000ED120EAD5A2BBA435F7E2F8457E1745E4
+:1078C0007003D6B9309898E72FD3E395DB1FB29AAF
+:1078D000F2A4C6C3B45FB618E7A17C76496BE2FD9B
+:1078E000FEAE3B0FFF9CFC40878DFDC0B28BE44F8A
+:1078F000E332F57865024CFCAA94E295B21F9569D3
+:1079000083DB25235E39BD0A083CF097550E6ECF08
+:10791000AC52B9FD42B7D7CB3B0E1C665C2BDD13D6
+:10792000C8CF3ED5F5AEF3162DE637BEB9E5934385
+:107930003FC77E05ADB398EC65C44A78BC4AF71BD7
+:10794000CBF438A4E273B3DF38F087DF539E8DEBBE
+:10795000DFCE19D7A5C523B782F2693C1F0C3F6261
+:10796000E6477F57A99370323F33713FF67FCA973E
+:10797000C19EAB9711D749EC87A14F5F64087C2F5C
+:10798000DE366F4D3EBEBF79DF07453DC22EBD06D8
+:107990009E185ED1D033DE960144D7223EFD9DFF76
+:1079A0007498F87498F03689FA97F1FDDC2AC42FA0
+:1079B000EAEDB2CE0FDF84B1AC5FB9965C6A23B951
+:1079C000945F9A7168C69F196FBDD69E22B20F66EA
+:1079D0009CF54A89E76446BB34539C5F2CD67CB344
+:1079E00028DF45B7B646E5F508FB775A693DFC4305
+:1079F000D2DB6D12E787F5CFB43D4DF6A8F6B73F61
+:107A000071933DFA5069F5D0FBEAB63FE0F6915D1F
+:107A100052826E7AFEC390B04BE6F775EA7C34CEA4
+:107A2000052EF8A587A26BEE437E9C477D26FD6D53
+:107A300068FFEB9AFB28CFF039A294779E567A66BE
+:107A4000111D772C7435367929BF4D5C77EDE33FF6
+:107A5000F168BC7F1C2CD0F9C7F96AC336AB3782FA
+:107A6000F336BC227BE9350188F2FACCCF07C2EFAE
+:107A7000DAC87EAB1688164E1D781FC56823BD096F
+:107A8000B4AFFB5876532BE415203EC79D33D4E8A2
+:107A900076D88CE35D99FABE888E5FE40FEFA70677
+:107AA000912EDA3F8290B0C7CDBFD938F66DA4EFE2
+:107AB000CCB617DD5259FCB9C26A96477FF8F65F1B
+:107AC000392C83E3B757C77B2C6E09F1735A87248F
+:107AD0000E833A455B678DB8296FABDB62F506F123
+:107AE000725D9B0C0EF25F27ED1C37D4B57DC2F89A
+:107AF000AC937C51691C2FC32DC5C511CBDBDE9B1C
+:107B000045F676799E0C7351A56AF79C13E37D10B8
+:107B10004DC1F1CB77BF3DEB87D447BC3B92C8AB9F
+:107B20002A7CC026F4C624AFF0DBB3281E6EFECD3F
+:107B3000672C8F0FF74B90533CF0F99A2DEFD9C873
+:107B40009F9C41C164A60B7E91DF0884E585B6B495
+:107B500064F28B5CFFBB4ABECFFB7F1793E37A3A9C
+:107B60006B1BCF787FF2774847CD9B76EF5C7AEF3F
+:107B70009377BA0171F081D22870FF8B073CE487BC
+:107B80006BAC418FCAADB85EF3CBBB198FCB8EDF28
+:107B9000ED11F98D2F4FEC1705F3689D4B367F9B48
+:107BA000D7B914FC8CC79A5FC8D5B44F734E81D92E
+:107BB000BB93E84D659688B7ECF083B1F789F30085
+:107BC000A0FCFC037DDF34F8B2CC719B1D6E4C9B96
+:107BD00017B7FF64CF12F62A08A13FD2B96A00DDB9
+:107BE0002B9F831C3F378BE6B9AB5869A473225C8B
+:107BF0007F50E797F415EF0B80A6C4C55955C7AF62
+:107C0000CEA17D313BF4DBFE5725C7D51AC53D71AA
+:107C1000CF31DF3ED86A1F225D89AD27F9BEE9ED7D
+:107C20005986FEC3CB1087A7C08E0F184F80FE3B2E
+:107C30002D57F41F237D5CE46A4C43BE7DFACABB1A
+:107C4000363AD70AE27A8611BDDDEF711FBCD91A28
+:107C50008D37E60F74D863E781A4D7DBDE33E9758F
+:107C6000E27DF4DFCCCF00A46994B77D608BCE2297
+:107C70007F1EC4F7527DC1D20DF684F3C6185E4C48
+:107C8000E78BBA7E1AFB9CCB4CF198D19AEDC2954A
+:107C9000598976013667273D5F34E72175D6D0AF25
+:107CA000893F7527ED9CBFD4B509FDC3803A3A0CD6
+:107CB000F5E1A35D875EBB05D7F151D89A3597DF13
+:107CC00096686F6B9E42FDC5F132F23B85EDED6724
+:107CD0001C4F19FEE823175E1C93446FF17A52BDC6
+:107CE0007501DBB3FF577676D92076F6BB5903E2F0
+:107CF00084347C0DFCE589E597537C61E6AF615FD8
+:107D0000CD76F3934C2DA9DD04DDCF1B7CACDD7962
+:107D100096717B3E4F9C37356CFB2BFB31646BD4EB
+:107D20008EB86D087DCCFD07C88F71FFC07C696C73
+:107D3000B27527F2D37CFF32922DE723D1EF139F48
+:107D4000658BDB2BF6E7543ECF6F26BF49765A533F
+:107D500081E40833204C7187D4F9FC5FE97DE6BCEF
+:107D60002238034636F2B92EAC8BAFCF092B7A3DC1
+:107D70004530797D4EB32D769E4BF7073BCF7D5F27
+:107D8000B7575E97CAE508D62C4D4E5657E2ADB2AE
+:107D900024CD237E9225CE774AB3C5BA8F65097963
+:107DA000B4C8D5FA46A3C897680F95ED5FBA9BCFC4
+:107DB00083AD7A7D06CE9CCBE7074ECB27C812D881
+:107DC000BDA17A8E42FBC315963B4BB1DFB5E1F600
+:107DD000390AE2C73BD5B2A704FB2F6C582CFA57DF
+:107DE0005A2AAC08FDC7834BE6CCA47D03CBDB3F0E
+:107DF000A5F529AB15A0FA91D296F7B87F97559CB7
+:107E00005F353CBBB786DEDF20A12090FF2DEE70F2
+:107E100023D731E482BA9A368FB53D7EBABF260F9A
+:107E2000F379944724CDFFDB2CF22B8E885B2BA1BA
+:107E3000BCD2B7F17B785F79D94A3921AE53EC8354
+:107E40008FDE333597ECEEFF85F7FF5B56F6E0EFFC
+:107E50003FF3D4B50B68FC68195419E72B57B42AC3
+:107E6000EADB31BFA6BCCD9043B922F85EE6B27121
+:107E70003ED792EECB253C1D239C665F7ADBACD7C8
+:107E80000FC94E810339CDD2B81BDB5774F9BFAA95
+:107E9000F383FE685FA06F5FCE56AE5B816811C949
+:107EA0005796B7B6113FA24D0A6CA5FDD77D8FB787
+:107EB000113E5FB73978FFE8E6B4F5D62B90E4724F
+:107EC00047D19D04FE37A55D7753BB2FDBDF93259C
+:107ED000E68DD0BCB77C5F16F3BA1A53C97F820F08
+:107EE000F54AECD370FC0E7ED42BA2F920EAD538EB
+:107EF000320589754E663AE4B45D4CC7CD7641C70C
+:107F0000825049730FD231CE1EBA8CF22B7C7F94F3
+:107F1000E4700B865B84E760217491DC5EBFEDCA80
+:107F20002D627D85ACAFACFF7CFE7EE6499A2F804A
+:107F3000F3D3396A40EAE1FE1EC5A1065561DF1799
+:107F4000C6EDBB3D0BAD27CAC4FE7E33E51D53F520
+:107F5000BCD8D87F33EA0D2676F9AB5C64B0E54E29
+:107F600099ECCA398CD7C88E99F7DD269BECEFD4F3
+:107F70008E8FD82E5FEC3CD099ADDBE37CC8A77523
+:107F800084E93C90025EDD4F7AE93C3089FEC79D72
+:107F90000766660B397DED79E09DBABDD1A84E0E1E
+:107FA000D7D18F1393DCFA8F2E82F24AAE476884C2
+:107FB000F4C1FD6ABBC9FE1B381FF38A7A3BD9B3F3
+:107FC00031AFC06DB4DEABF5F393FED3C0F580E303
+:107FD0007A1C5C1F68EDB28642525C3DCA490BD7E1
+:107FE000A3F48337C4F52B41BB1A647B3996EB4F5E
+:107FF0005A4EEAE7BD7A3D438560D93F5C0F61AEDA
+:108000007F98E29E242FACE4F31990260DAC7F9864
+:1080100022DF2A935D81A3429E17EA20E43299D69B
+:10802000752E024029DA8457E2E48DFF9B9815945F
+:10803000B9FCE954E2F529265C98E57F6DB61EDFB0
+:10804000E8F21FB48EE443B1AF360EC6721D89D577
+:108050005C47F286850B366375241521D2B7094D2E
+:1080600062DFF862753CE63A1D731D4E9E3F914FEC
+:1080700005355724DCBFACB13CA17FF9CA2909E31F
+:108080008BD1A1C6F74B1F9A93307E58EB8D09FD1B
+:10809000119B6E49183F2AB428E1FEE81DB549EB53
+:1080A0005E0C9C8C09AF48B8BFD1F9E4BB84AF9695
+:1080B0003C59A578FECA8EFB4C7531D31817538CEA
+:1080C0007D785DFE465D1D9581119FC7A3FC1F2B2A
+:1080D000A6B8E9FE2A491B88036F24C87EFC1FC589
+:1080E000C17A931D30F4FF62FB373FD6FD849C526A
+:1080F00024519CE3C3B82A652AD5118B737B784B36
+:10810000D4AB7C96F2778E8B34C9ED856FD25B55FC
+:1081100089E2A07BAB348E83EE1D527480F60F7A19
+:108120007EE0F64AF903EB42CD75A0190EDF64E05C
+:10813000AD115107D982869EEC7F708683E38C87D0
+:108140002D96DBAAE3E87F225BD89F27B245BEF5D8
+:10815000735B7837D901C5016A539E789E8A1F8068
+:108160002A7B502EEE4C10F561F0C6DA9985E43F7B
+:108170007B466AE9543F8BFD6FE06525C4FEE496BB
+:108180006685F3BCD5CE27D99F942BC29F8C93854F
+:10819000DF403FD241F6F14DE97EAB88B382569283
+:1081A0004F810382EE72F6AF7C4E9C0E59D28A321A
+:1081B000AA4FBDE0B7B4AF104C876AA75A884FFDED
+:1081C0008B653E0F7E8948427AFB6B46719D73FF3B
+:1081D00085FA3F2D8DF2EBFEC58F9EBDBB32A69773
+:1081E000276DC9F3BC8BEDBBD56C793495CE514E60
+:1081F0008E8484FA8C37B3457EF866B62CEA0C423E
+:10820000EF79884D7D4BBE184E4407A4EE352E1CE9
+:10821000F2E0A61F54935C6CEDF382B4AF69ECE31B
+:108220005FC8033BA773FDB6912FDDFCBAD8D7BB5F
+:10823000F98BC47DEB8FB2C5B9C047F43E6CCBBBA4
+:10824000FCE3496E379042F0BEB27F3CC507D52AA9
+:1082500068E4F717F817DE7D14FBF3D64B1CEFD359
+:108260007D1A7F23CA90EE9F00EFAB7B91BECFB308
+:10827000053DF3A1DA4A74BEF6FDFA54C2D3EBE928
+:10828000627C54026D6BDC7C37E8F3BDFEFDE57B60
+:10829000294FA7F7D1FB891E7AFF3C154AA8FF1A80
+:1082A000F8CFBE5A3CF0BD3781CFAAD77B59C94F12
+:1082B0009642A8ED69B2AB472CDEB5C06D2493FDA4
+:1082C000929DFD525F53F4C97B90CE3FD5FE75AFB2
+:1082D000847CFDE3C2E8AF9FC6EBDFDD248386B874
+:1082E000F838C32F7BE2EAB44F2EFE2495F889F1CB
+:1082F000CAF69F92DEEDB47BA9AEE3CDDA9DC3E36F
+:10830000E3FA54CF74073D07932EED3CADEA89C9DB
+:108310008CBF15DB05FE56FC66440EE16C45EA0594
+:10832000DC89FEF6523E279D2041D2FC783FE24D8B
+:108330001BC17535A021CEF67F2EEACAF71CCDA849
+:1083400020FA14F05F16BF9E3D2FDD329AEB79DFE5
+:10835000C8BA243A496783687F6F665389F181AE52
+:10836000270B3A332BF478729487E2B9DFFFE6ECFF
+:108370007F105FF6EDDCFE43D6914BE3C3C03A5A63
+:108380007527DB27230FA3BA57CAD30E59D84F5EE0
+:108390002DDFCF7918D56970DE35A488C7A3C15108
+:1083A000ADC2BE89EF24300E6EF672BD27EBEB4AEC
+:1083B00055C42D469E245BBCB98AF8C8E0C5A93CCB
+:1083C0007F09D0FE989B122BC35E611CE1962DBAEB
+:1083D000BD029F03F3D3D1BA3D9BE5F15EDB22CE14
+:1083E0006B12E24FEC57ED4A127756E33F8E3B3764
+:1083F000FB9B53D82F6D96CB28EEF03922E4C7CDE6
+:1084000071E75458CFFB0003E2CFE7FE7249F1E772
+:10841000F73CFF3DBFB3D4A3B1FD098F14762E1CEA
+:1084200019C2790EFE55907E0DA5BD003A07CD13F9
+:10843000AD4DEA1DE940FDACF594AF7B681AC2650D
+:10844000A8E00FF551A450AA7D72E82B8A03BB1552
+:10845000965FFF73577CED772495A887E4EC23871C
+:10846000A770BD735F97D08FB60CEDDFA7529E81CA
+:1084700071E656243145E9B1A52759CFD3647F5120
+:108480001FC21E9147393AC4B9A843F301D99714C2
+:10849000551D4789B9317EB147D8DDFAC36F16D96A
+:1084A000503E672D47DD74BE52B7F729372E179A15
+:1084B00033FD0F90FE2C3FF9F20495EBDCB614511E
+:1084C000FE1D8EBC3C83E3B3D9C8DA7183AF27B0FD
+:1084D000A9823E4280864D99DC8EA27D15BC14880F
+:1084E0008875F676346724DB1F08FCDB5B0769BD03
+:1084F0003B8FA570DCB233BB9BF520380F603BF29D
+:10850000FB89CF47F37C0830A6E38A6A4D227FFFC0
+:108510000B7D3D3BF5FCB2F77399C719F38EE998D3
+:108520002EAB88ABB248EB41AEE3EAB46B24DF94E8
+:108530006D20F8D399C2756181FDD788BC335D9CED
+:1085400047B70D89FE91DE13DD67D7A84E35456D1F
+:10855000850C9CBFCD26FCEC2804FE53AED875E3F9
+:108560007D299D1BF92308C405D7E3A528ADF00D8F
+:10857000573CFF5399DEFD1E11EFB40D89585CE4A2
+:10858000273057DACA74C5E8047EAF41E7288E8BDE
+:10859000DB6CD1F769BF1DE9520917A340D0099DD3
+:1085A00023348A57525471AE9EA26ADEA03490AE34
+:1085B000C058086170000FAF860B7ACE7584436295
+:1085C0007D07EA425B891EC70417AF9B392DAE4F6A
+:1085D000866C52ECF9139E65EB5A0A695DC20F2A4C
+:1085E0004A98CFC7DD0B40A5F3EF14C5C77952CA2F
+:1085F0007CD09A505E4E878FEF7B708EA6C9DC8F41
+:1086000010FD2ADDA77D9B34D53907E94EFB328D5D
+:108610009F6BE8B672DD79DDDF6F4A2BC3F59DB144
+:108620001CBC6717B61F2D0C0FA773DA0969FEB7BC
+:10863000C81E3F736AD1BA3138FE2F6D56EF5CB257
+:108640004B3DC11FD3B97DED13568DFCE2836FF412
+:1086500047BE22F93E2BB15DECB38AFBD8D79AF026
+:108660007E43E707363AD7BAA6E36D1BED7FAFCC62
+:10867000F1BF4F7A30A9A3A98AF836195A9B699F8E
+:1086800013ED21D74B847385BDE87F65F8D6A638F6
+:108690003EBB72F47DEFA8FF72D29B4E5D3FF75355
+:1086A0007C84ED5E3D4EDB7BE0BBA55ADCF96910B6
+:1086B0000EF27EE06A788EEB3A8DEB7D216536E135
+:1086C00068F46B8EDB7C7138B3E5087DB7E9EFFBAE
+:1086D000798EFF4BD6DB03EFD8DCB8FEC09FC345D5
+:1086E000E4AFC218CF7D5D1D69C0A42F17EA8E4E7E
+:1086F00003DB919DAF7570FCBDF33E359DF41EE923
+:108700008734ECEFC5F882F4686FB1D0BBA657CFC1
+:108710008FA5FDE2F3FB965F4EFCEAF5580D7CCF8A
+:1087200018427AB41BD88E197A58467A28D1F77B2A
+:1087300062BFA78CF04D7A67EB9EC37AB7D702A4CD
+:1087400077886FC63BE25BA538A44C45BCF3F323A6
+:10875000588FDBBA5FBE82EBD991BDC3C651DFC271
+:10876000F86A8BCC0949F87CA53572909EAFC4F7A6
+:10877000376931BDAC9412EB7A167B449DAC611F16
+:108780007FA0EB6778A496E6C5F14E594EC07F9C5A
+:108790009F147DDD8FDEBBF127EB36A0BE94FA2A55
+:1087A0002C1328DE3926B31FD8AFC7C92BFE30E5FE
+:1087B000865DE23AFBCF888E8B837ADCFCDCAA5C98
+:1087C000EE935FD0502EE3B1F55550BD7763156D34
+:1087D000C54D9ADD7A88DA29D5E12A3A2E9CB6A0D1
+:1087E000FB90F8C6CD379AF0D67EF05BA3B94EFA6F
+:1087F000A41DE83BCEF6FF8CFEF1095CFF3DFB912A
+:10880000DF90342E61BCA1C766FC0D86933EA9E7BC
+:10881000FAA96897AFDBF8EB6B1574E80D04045CFC
+:10882000FF9C8DDBD605D1079EC8F15D9783F8FBD1
+:1088300022D77F5D0EF2ADEFF87F7AC89FEC7DE521
+:108840001D37F9E1769B6F34E1AABD04F3882478E3
+:108850009C926365FF5A3948BD49638EC8B7860745
+:10886000611DE1A5A15D5643E4A77DDDD793DF78C7
+:108870001F5949FBDA4BA707DD942FD5EC3DC47592
+:10888000FA463EBD04F43FF9D659C4FF73B9223FFE
+:108890005EBAC19A90DF8E80888DCE91037E576339
+:1088A000044552638A3BEEE8D8C2DF8DD46E4B7C20
+:1088B000AE8EE2148450DD45F2E3C61C7D9FA41405
+:1088C0004A294E41DCF03E49F455D9BB15B8BEAA41
+:1088D0008BEAAB765A049F9C0E6849CB88C52B2344
+:1088E000F27C4BC8DE2D31FC875EAF146D93F87BB4
+:1088F0008A513B44BE3CE5B4B685BF930AFAB84EF4
+:10890000AF860840BAA728415EFF94DC5208E2FA1D
+:1089100027A179267D59DA2985989FFA772F0AFEB3
+:1089200013FB459B65FECE6FB30499C5346F94F974
+:1089300053ABEF1F2EDF91787E51B7E9F8610A95AE
+:10894000EAC3A6F3209D3FE6F39DA7E83F929CEF84
+:10895000FC24478FE78AA028E1BBBCAE4BFB2EEF7F
+:10896000238A075C74F8080971F91E1D470DFABACD
+:10897000EB42B258378A82EAA36FD76112002FF315
+:10898000A91E71423880F542DE463D632D54DBA8B6
+:108990008EACBEBDE9309DBF2DD5E35A339E90A16C
+:1089A000CCAF657ADD50CDE6C4FBB53A5F6A4D7C4D
+:1089B00069F04B26FA44DC7DA9F4A1E5FA0EE1A0AA
+:1089C000769795EBB9CFC1AD5C7F55DFBE85E95990
+:1089D000AACB6F20BD415ECF325C0FE9D3A5D26B2D
+:1089E00096DF3103E757C01509F29B9D7949F22BB9
+:1089F000057539ADAFBF4BE4B5FD5D25BC2F61E01A
+:108A0000C5FCFC2C3D8EBE66938837CF7654392941
+:108A10001EE83BAA7825C47DC5B14FDDF4FD4DF9B4
+:108A20003E19E89CB4AFB3625D10EDE59EAEA13790
+:108A300069E807CA8F29EC372A8E9587528AA95F81
+:108A4000EE2CE53A132D93F2009C87FD70DFD1A147
+:108A500027CA384E9F5949296AD3D17227C50B7B43
+:108A600040EC6F48C72A337BE2FCCA7B3962BF61A6
+:108A70004DEEBB0F939DBA66B795F783AFB1465FD6
+:108A8000A23C6C4F97E26DC27EDDB145AB5348DE30
+:108A9000BF91BC14761FEE5E9145E735F59D56D526
+:108AA000CEF4DE7D90EE077749DE61383EB0EFEA26
+:108AB000D16DB44FB4A5C24BEC35DE579EAE3D4AE6
+:108AC000F5AE90E7E4BCFD9ACBACEC5FCFE43BFFA6
+:108AD000752EAEABD6B76516D9E133BFDBC37515BE
+:108AE0007D6D12E44AB48F7CE849AAF739F3F4713A
+:108AF0001B9D0757B51FE7BA8DC1FCC1D910E28E87
+:108B0000F3F6561BE537F55B8C7E0F7F8F52ADC7B2
+:108B1000510DDBDEE67E2DE50184C7CD7248C3FF33
+:108B20003CB4EF193E1F6ED825EA3E2EDCDF26F15D
+:108B30007D03EF8B74BBB51C34C6FB7203EF7A7DEB
+:108B40009481F7733097EBB496EF7A84F1BD44C704
+:108B5000B7B96E0A2DB0AD2C4BE82BEDB799BFFF1E
+:108B6000BB43C7F71D17C1F7A85C1DDFA36014E165
+:108B7000FBFC74514F77FEF81027CD7FFE08EFBE47
+:108B80007E1DCED9EF1ED5E382FE88C567BB323687
+:108B9000AEB7E313FE0E3170B4DF467527B33A3F2C
+:108BA0006679CCED3C3093F87D1DF8EB887FD77566
+:108BB0003A558A83E7F6087B36A7D3CEE713D74129
+:108BC000B885E4DCB7FFF1960CC2CDAF056E0C3B67
+:108BD000B74CE7EBB5653F9845F97BADEE0FFBBBB6
+:108BE000EE9CC576671C1453BC3747FFCE7B4E58AE
+:108BF000B7439B13F94EE7D424B7864E3BD79B5C13
+:108C00000B3D36F267D7EAFED3EC27FBF29C2CE74C
+:108C100020FAAB6138BE6E97A98E52E9617AFA3BB1
+:108C20006C7CDED560F2BFD372AD09F51783E1D35A
+:108C30002CAFDB72757FA2CB6B6E54D431CC7945EF
+:108C4000F6D2F94357647519C50B06DFCCF2EAD2A8
+:108C50004AD3BEEEF7125ED2E37CA37F83FEFD5BB8
+:108C6000586D75C5E7EDCFE75AF473CED04F2B7032
+:108C70009D7749D04D38C4FCE6867229697EB332AF
+:108C800017C73F5F78FBFA71F1F98D6FCB708AF7E8
+:108C90001E44BB5251C9F53BDD7C5EA8B4CEA57322
+:108CA000B0C02EAB97F29A4087CCF14060973D64FC
+:108CB000C179AF211C215DD59DD2D58423CC1B5A0F
+:108CC00072D13ECDA32D651C37AF03E3117C6EDE60
+:108CD000CC8F197F47868A75F72B5A4EB23CC2C893
+:108CE0001F1A3E17F1AA71BD01ED008D6FD0BF4B69
+:108CF0006B3FF8D7A2E2543AB7FDAC6821C5A9B9D9
+:108D0000227F31E2D528C6AB257ABC4275174B8548
+:108D1000E860E973F7D9C87E1DA61FB6A0FA49D549
+:108D2000BF86F261D50F8D3FA240436A613D6A2044
+:108D30009D221CEE95C4FECDB356AA0D81A6978741
+:108D4000705D60EF6BE21CCAACEFBD8BBAD95E9C64
+:108D50005FE86A24BC2D2FDBB206230C18BDFF751B
+:108D6000B637A37F67532D6A6C5D4DF4DD1DE7694F
+:108D70002D09F1726F47B38DF7A1E3BF1B2E1918B0
+:108D80001FD55F641FEB79935D41FA39DEED3B221D
+:108D9000ABB42F847CFC657E3CBFF478A8FD600AF0
+:108DA000FBAFBEE3AE10C5FD7FD1F17846DF976F14
+:108DB0009A24333F2C93453B7AFF3325245F9287D7
+:108DC0001FEDFDCEFDCF5CE1E37DF490A823DE91A5
+:108DD00058875D1F4EACB336F81AD0F98A740DA7C8
+:108DE000EF950DBAF62A3D6E6F123D92A4832C2F9B
+:108DF0008B9498E7069E95ABE3EB48713DB791DD08
+:108E00003B69E88B12F5901F7E2B5763DC34750AA3
+:108E1000F95AF68916DFFF1DB15F63E5F70FB83F1A
+:108E2000235847F7CF173BB9BE013E0FCEA5FE3DF5
+:108E300025E2F703EE79B97644FC3E1D48221F0F68
+:108E400058A35CEF17386E61FA02C7FB3D435D64BF
+:108E500017B7CCA43ADA6B757B71B8C45943380F95
+:108E6000D27B7362F32CC915E71B40EBCD8D7D5F80
+:108E700069AC7735DCC87C58ADE3EA3FF4BC1EF33F
+:108E8000A8F3B949F2A8C1E2DF0B74EBF1D3F9E919
+:108E9000DA89EF210ECA8F2841CAD7F7BC91122276
+:108EA000FFDFB46FD99F281F0EBC69078A43EED934
+:108EB000BF6C04D7E1FBFD57923D39BFFF8E2BB944
+:108EC0008E5112DF970689BE5C8AA75EF5509C54CE
+:108ED000BFEF55AE73ACDF3BFE518A9F305EBA9652
+:108EE000AE631CC3F82B3F56C9F8DB73B432B3949E
+:108EF0000807AF93E6AD3FA270DD63FD91CA17E7A7
+:108F0000525C736C06C74F46BC5441F938C54F4795
+:108F10008626C44FA979827F7D075278FF4382124B
+:108F2000811F189A809FBAF63F709C5187F62E1EBB
+:108F300047C673C5790ACF332C4FC74F58F2313E1D
+:108F4000768BB6AE630FAF6FB935CCF26EDA6515BE
+:108F5000F7DB446BD44907212348FC78912EA11CF0
+:108F6000E6D84285946FBE502CF20DB33C9EC813D8
+:108F7000E7852F9C14DF19BF30DD3F22D9F7C641AA
+:108F80009821F27049E777BB7576B2EF7977E4897B
+:108F9000FD097726249C4B1AEDA379425FE6D8C4DD
+:108FA0003E95F9BE3FCFF03FB08ECE634ECCB5AA12
+:108FB000C6EFB7E4A1DDBD1E8C3FEFABF3B3E89C79
+:108FC0004BE4D5003D33C91E7E9BF6F929FE9A2459
+:108FD000FCBAB1CF3F6F333C20F6F96FB5925D30EC
+:108FE000EA4BE6F9CCF157F5D534CF8DE8DF699E31
+:108FF0009B6627DEFFF645E2AE0579BA1F1F0EC35A
+:10900000455EE172923F38D76555655E476868B244
+:10901000EF0B0DFB737895383FEA42BB486DD3A840
+:10902000D779DFEA8503279F4C67BB9A0225C8E200
+:10903000ABBEFC9327D93C4D17F4757E02FE0C792C
+:109040009DA53CA06CA0BCEECCB3E8DF259DB1F1A2
+:10905000F926343E649107FF2EA969D4672DA44FE9
+:1090600067F5EF5E90BE227B9CDD3F9BF731DFBF53
+:109070006706448378FFC0283BFBBFFA99129F1F05
+:10908000D447843FAC9F2FFCE1F0F6792C97EFA0FA
+:109090005C7C5E3613AF515DAE21EFABBEEC9B69DD
+:1090A000E493748ED34438673B9DC56D7DFBDB2D07
+:1090B0007C5E897E97E2C21B2625CA6D04F81FC814
+:1090C000C6FB37CF96BCE84106C8FDE65BE7B1DCDE
+:1090D0006FD2BF8FB998DC7F9BE7FF691EE97D7770
+:1090E000FF77C6208B5E18F54111F9D7864170BD18
+:1090F00055E72F0C8D3E4DE765DE0BE7E97F7F3AA4
+:10910000FE3CBDC4E3DF924776D5F2A5FB0AA0F989
+:109110007A7EB942223901EBC5607AB5439F7F4719
+:109120009E2ADE9325CE8746E9FD17ACA142FE9E1E
+:10913000A2ECD2CE019B9E7D7E2CD9B9DE0347C620
+:10914000DAE2E47A6605DA07F237FB0EF1F78731E7
+:10915000DC5974DC29DC4AD28DBA1F4DC4E119C236
+:1091600021D9E7DD87AEA7FCF16CFB4D599216E7DC
+:1091700067F79E700F8B9BF7ACFEBB1898B70DFF7F
+:10918000766A3C9D0F309D67C3623ED4FFE1378D08
+:1091900089BFDF6C7C67C7787E7064239FD31B78A0
+:1091A0005640E0D9F83D8C0BDF55DA80BF7B0CEEE2
+:1091B000B7737D459F355A941EA72F1F1A72449886
+:1091C0001566312BB9DE75226CA8E273024CDED72E
+:1091D0004DA6CFEFC2B2A80F6DE4BAC5698DE025E8
+:1091E000DC4AB099FB13668BF3F229D02D135DDFB7
+:1091F0008428B73E50156A67508519B6931C61994B
+:10920000C2ADB6F6834EC257C4A3A4BFEF10A5A744
+:10921000C9E4175BBF02EF1B78C5C1180425FD4EDA
+:109220003F2B5FD87FAF53E863F4ACF8DD936F401A
+:109230000FD33F55E9667A53352D83CE4B763FB732
+:1092400042A6FA97FDA04549CFBC998DBCFF169D5B
+:109250000EE1ADE9B1F54EA2F5AAB1FE940560A10B
+:10926000F54AB04BACBF1132E87C6C3244F83D5744
+:1092700011C1B8DEE9A029D4B7E517EB7C16F95B7C
+:10928000959EBF591C41AEFB49CD17B8762A2139AE
+:10929000AF92B7B6C38FD0F94CA958E744BCCEE71C
+:1092A000388D82EE0BFE3A5FD8BB29106639430D2C
+:1092B000A82FF28F2BCC54895F52C463A1DF13BB5C
+:1092C00054BEF67980E977DF1EEDFD6165ECDCCBFD
+:1092D000DB99C3F5D0EB254B5426BA1C85A21E3A68
+:1092E0000261FE2E3392F87B67C5F9375E9E4F7E92
+:1092F000CF2FBEC335D775EE086DE5BA9B05416427
+:109300000FCD530870DA13AB03B09684F8BE95CE38
+:10931000D955AE33ADA07C715FB6FFF2FC6CAE37B1
+:109320001DC69329A1F1D5A931BC2365FCFB3B4E99
+:10933000486D257BD4ACD7D30655B75ECF54C4EB6C
+:10934000D0D0CEF38F4828A2AEFBDE2A517F7AEF31
+:1093500090FD5CE7DB23812A15D0F9FF7EAE03A6E2
+:109360001F86B3167CCDF97F96FEBB0F25FE3726F0
+:1093700096EA461E9F6B3E95CAF5AFCA0C9F46758E
+:10938000BCE67AF1D296F10FF5705E6AD06BAA1343
+:1093900057BC7CFF5EDDBE363BC4EF0049ABEDAA97
+:1093A000348DBE7F5FC1BF63D54CA141257DF7BE23
+:1093B000829FA73A662A02ED4DF3DF44FC32FF2E6E
+:1093C00015C2ABFF059A376D38EFF72593C73443C5
+:1093D0001E9681755228875B49BE46DDAD516F4BA5
+:1093E00080A0753B7DE277F054C409FFEE1F42C9AF
+:1093F0004EB8F4997FCF43D4FFB6E8FC47BA7670F5
+:10940000DDA7437CA76D7CCF6BE69B81DFFF02B9B4
+:10941000D77EA250530000000000000000000000B2
+:109420001F8B080000000000000B9B25C3C0F0A3A9
+:109430001E8145A551F9E8F81C9A3C0B0303C34F64
+:10944000205ECC835F1F2E1CCB82607B893330185B
+:109450008B32309800F12C209E0DC43F81D8508C67
+:1094600081C108888B81EC1220F6056247A0DA2FB3
+:109470001C0C0C13851918E600F1726154735F30EF
+:109480004268252E060653206664C66E3FA73AD072
+:109490005E5D04FF23906D6F409E5F46F1D0C35523
+:1094A0004EA8FC7C6B54FE2C5B0606666704BFC0AE
+:1094B0009A34F3ED817A1D9C71CB77BAA3F21B3DF0
+:1094C00051F97FDC50F935E1101A008D579524B819
+:1094D00003000000000000001F8B080000000000D7
+:1094E000000BED7D7D9C14D595E8A9AEEAEAEACFA4
+:1094F000A9197AA04706A8611A19E3A0050C30281B
+:1095000048CDA0384693349890D1D5BC168821090F
+:10951000CFD7F1ED2A1AC9F47CCFC0800DB2067DF9
+:10952000515B0C89262621899B3559B3698DC92346
+:10953000D96C168D9B47B2B86F243C379F9B79EE50
+:1095400043FABD90B0F79C7B6BA6ABA6BF00DDE4F1
+:109550008F37FCCCCDA9BA1FE79C7BEEB9E79C7B8B
+:10956000EAB6EAF1437C1EC059FC5B03F0A6170083
+:10957000964D95E94E33076DACFC1C98FDECD1A5DA
+:109580007AAE5362E5A2D0B84732002E8F66003C17
+:1095900000F1C38F8287D51B695461671380DFD8C0
+:1095A0005003A1A97EDD657F0F406E61E9F7F20BE4
+:1095B000A33123CCFA7B6A79B7C5FA19F9727BB764
+:1095C000D53AF5BE010765F8CD07864D3DC0E09C54
+:1095D00007C113051866632F64FF69F72521C1DAF7
+:1095E000A9B951301661BD5AAAAF3D73D4731B7B24
+:1095F0003EEC85EEC3ACD49E4DE7820CEFCB9ED300
+:1096000097C88C1EBF62797EC5607FCC934D231DA9
+:10961000B17DD4EF2946170EF576D1B314E9617404
+:10962000ACAA929E55A5E8792E9D467A2E7FD658F3
+:109630005C488FD6C8E9D11AFB689E4EC5183D4DCF
+:109640001742CF3D44CFB0A067D845CFBB043D1BE8
+:109650006D7A1A86889EA1398C1EF6C8775F1A1219
+:10966000ACBE86F484B19E939E21A4A7B5083DDAD2
+:109670001F879E0F09794B213DCB2AD393427AEA6B
+:10968000ABA02794019D3DF783641D6E9D8E975F6F
+:10969000F071D13399589AF53BFA7B99E699ADC8A8
+:1096A000D8864553F5C6055EDF691A8A8DA37C2DE1
+:1096B000783006ACBFD13912D577F7FB10A8547FAC
+:1096C00066A3D58BFDBFE34967FFA37338BE76FD64
+:1096D000DF8879FC0DC8D46E5628318AF0E882AF55
+:1096E0004112C7F166623AB66BE2ED06172CEF1E27
+:1096F0000F156BCFE919DD912679D672F710BFFEF1
+:10970000624E060C06FB9F4C02F25F8D717CECF6FC
+:109710000C2F802B90ECBB2C8BE30770119BA7F4D4
+:109720005DB9341B2F9EB9434B307E8C36F46948AB
+:10973000F788B1AF1BF5D6A9B80A7213E2559C0F92
+:10974000B65CAC81316D3E9BCFFE576473274CAF46
+:109750009746E1AA9F82959007722D407F6701E9A5
+:1097600049D2FC0F2E7890E85691AE4548570A0C26
+:10977000F6FC1B427E7CCFA401E54A33D2B1F4A2B1
+:10978000E9E38C20FF5BB1D74C6C4301FD3FB5E7AB
+:1097900097CDAB6B7E892F0F81954B235FFCCE79E4
+:1097A000B3CBEF09BE5FDE9826FE561A7F3AFD7CEA
+:1097B000FCBF0683FA012D134B84A7F019F58EF731
+:1097C000A15CB335691E62552E63E37414F0DB3D72
+:1097D000DE249D4AC621C75F137C1AF54FBC50D8C2
+:1097E0009F1B9F6F897ADF029D4A9BAECB9EE5E36C
+:1097F00054EAFF47C8E27AACEF5A574ADAC1F77B1E
+:1098000045FDCB9F73D62BC59F8F4FF2271D437904
+:10981000B4D723FE59330184C8D05F6839C025F816
+:109820007F5893DFDE367E172EADE3D1E4296CBF7F
+:109830000D92F302CD6CBD78939FC5729D62BD49B8
+:10984000FD42487FFD52217732E9013E1EEB1E5852
+:10985000FF61D19F2275013079F6B543762743ED3C
+:109860001AF9784E62FCDC0760CED20BF6F5137C59
+:109870005F5FA967D7E27E7EA5C20861E3D580EE6F
+:10988000C712EBE758BDC8B290C946021FFC594D3C
+:10989000A288DCF8DB20EDAF61E3B7AB8E75E1B7F2
+:1098A00092807A211C839C3F02A04BE128E1BF02F9
+:1098B0005670FC0D09FBAB538C5E858D23C73DE6CE
+:1098C00041F6B46615ACDC54208786C4E5B737EEA4
+:1098D000F1205D434CFFFBD8928CCC61EB1DD7434C
+:1098E0008CD91B45E47652BFE765C8CD60FDE625FF
+:1098F000C82D657008562659BB8C0F569EA471C1A1
+:109900003C5844CE364A7C5EA5F8C4D9B3641740AF
+:10991000F65AB20B32B48ED578C6C27D40B322A6B9
+:109920000FA7FDCCFD5CAF2960A19CD4C633B91A4A
+:109930007C6F5CDC84F8CE8AA7E0B5565E9E28C0BA
+:10994000570BA563643F355D2CF515EC63CF33F9F8
+:109950003951206F233BB81D30D83424F4CC8749CB
+:109960007FDAEF3F20F8A48E3364902E43CDCE975C
+:10997000A6CBF588545C4F6C16F4E2DFD5CB9DF294
+:10998000AACC14F2CA86F02940F235FC1464115FA7
+:10999000C6C9176E63F0A52F6AB093C9572B1CF583
+:1099A000A0FC5C0613549AA0CB582E0193CA3648EB
+:1099B00050F9DB0E26F7ACDC6631799F4FF2FF3EA3
+:1099C000898DFF9B39C98511F6DC1F4F5F81FB0B29
+:1099D00093FF8DF89CC98984F2546741D1FDB2563A
+:1099E000E2EB75AFA2FBB1DE5E0B483FEE97FAD318
+:1099F000B84F8C083B69C40F8E75BC47D03D22CA56
+:109A0000DA7812C6717ED9BCA05E7FBEE9765AC7ED
+:109A10003E85C3436C5E48EE56F37DCC8D8786F35E
+:109A2000B2E8FCE761E31F7F1E86A4FAA2F3308C44
+:109A3000F3B051E2FA53FD391FBF0C7DB44F6FEE06
+:109A40007D9CF8AF9E3CB7FA36FDCB5D7A7385D02E
+:109A50007357C2C45C85E9913B7C39559108EF4747
+:109A600010EF377F72F403480F8C2717E23EC5F0E2
+:109A70007E54223D9982A36C7CE515398B7E8A2722
+:109A80007883962CE3A780CEF49926F4D97CFCDF6A
+:109A900046FDF5E074FD7BF1E10F1D237B03B4E48B
+:109AA0004ED44FAB531ACA457FE3060DE568B89113
+:109AB000C128373155932E676508BA50FE6CFB6399
+:109AC00028B669A4298A768FB91CBBB5C75F1B4B22
+:109AD0008244CF93337C4DCEE73FC3F5AF2763324B
+:109AE000A34FCD5EAB219D83FA06ADD0EF5243C9A3
+:109AF00098CAE47018C7C3F1BDA9234D6DA83F6192
+:109B0000691FEA733D054B51BE639D84E7DAC68445
+:109B100086EF7DB125E03390C509B2AB86A24E7FBA
+:109B20006EB8F14EB89DEAA7E0F5D074FBDA174A9B
+:109B3000815AB04FE03872C13CFB94540EE99263F5
+:109B4000C5F5EE3F09F9F71809DA6F20F3494B63C1
+:109B500072EF1532E08DC14FA4CB0AE6295AB0EF5F
+:109B6000B0791AF29BDDC5D625DB419CFD9A1268BF
+:109B7000CBABEF776ABF15F39E5931324EF31ECE51
+:109B8000E0BCF733BD4FFBEAF170F61023A1777507
+:109B9000EA317CEF4D2BD017A56E5A709FBB5B7ED0
+:109BA0008789F2B707F9C6368EB11E8DCA9D3D3A38
+:109BB00095233D312A3F19FCC467C759BBED699F06
+:109BC000EE4339C8DCFD25EC8F79DD899DD86F9493
+:109BD000F58FFD2A9A7E484798EF3BDE382F6FF1CC
+:109BE000703ED67802846F9B87DBE10658242F19DC
+:109BF000BDBC9F5ED3EEB473C366606A3DB0FF82A6
+:109C00002D750ED86F5CE4A8EF5E2F2F79B8DEF0CB
+:109C10002A09305BB12CAEC7CF4A32D593E5C513C4
+:109C2000687F28B354B20B0625A7DE7ED4C3F7BBEA
+:109C3000273C1AD11983896F9F65FCF0EA1EB27B1D
+:109C400022B5F30FE7903FF5AAB9801511EFB85E82
+:109C500057643C882ABF1E2F58E74F4956DCF3272C
+:109C6000C0A769F4F7763AE47A9787EF7767C57A01
+:109C7000917D5637EA9918134320F9301E473E78F4
+:109C800082ABCC16C687C15AD5407F68A0D7537423
+:109C9000DF71F341AEB92586FAD1CDF76F09397A74
+:109CA0005AF07DCD99F7909ED8AD7BBAB221E4DB16
+:109CB000D12ED4F3036D1E0FCAF99F0CFF5C746C98
+:109CC0009FE4DF241DC4B78128B79BC774263FB823
+:109CD0009EA35C7E0CC875D17B93D1254DA7CBCDBF
+:109CE000BFB79B3E9BEF35B59E44B615F19B481020
+:109CF0007EAB94A2F8FD47F1DDC62B3489578EE385
+:109D000065FE69E0F594943C88EB7B8F90D73DCA63
+:109D1000B8867A216ECB4D90AFA3E97A4972C83BE1
+:109D2000EBE7F3D8CFFDD80FAB7FBF32E1E8C7AE8A
+:109D300017463EF07591E0EB42F9A3AE0B1BAF9DC9
+:109D4000026F03B25CAE5B8ACBF5DB8D97BD9FF6ED
+:109D500005AF02D437B5A104D9DFB342891CF2ABF9
+:109D6000BF5E35D0FE618E12EDD7D4D428F093EAD1
+:109D700037C6B0FE607823D9E583DE04D9E947EA27
+:109D8000BF66DDC6E8EA3F53033E93F903C1AB8EDD
+:109D900018A8178FC8E4AFF59F699E952A32CF4166
+:109DA0008C8F31FC03881FD9D5EAA4118EF8F68771
+:109DB00098E263FDBCD10A59D4A7DE901543BBBB22
+:109DC0007F9166F651AD04207FFB821F684FB64E2F
+:109DD0006F1F0C0D7D4CBE6C6A1CF6279D45DB97F2
+:109DE000EDE1E8C7137D92E37D513C2AC1DE29589D
+:109DF000A7FE196C68D8B5649D6D9EE23BA3A5458E
+:109E0000C17D130226CE7F3CD1D5F73BE4D3F76466
+:109E1000D2836EFEFCB59C0CC8CBA6606F3449F3B0
+:109E200066F7775DBD427A546984AC4FC251135DC9
+:109E300068DFF6377A28BEA68436D494B5BB1BAB50
+:109E4000B3BB41C43D6C79E8F8391F376072FD1D22
+:109E50008671C0B84A0DF0B8462D1812507B534A8F
+:109E600050B06415C553A2FEB7BADF5BA85FC9DA6C
+:109E70000B6783E7D0AFC2FA6D7E1BFAAD80AF1FD0
+:109E80003E45FD32F5103D3B63AA5F6F2C450FE167
+:109E9000CCD9B3F272E04DE82F49F2AD784C5A9F1D
+:109EA0007051C43CC48AC1E89D0E7FEABDF27C4774
+:109EB000DC54D5873E264558D9B8CD1A2FD00FEEA1
+:109EC000F9EDC681D0BF6CDC628D57A137D0EC2E86
+:109ED00016971A5293D95EDCBFE786288E084A8A05
+:109EE000E2C2C352DD12B49FED7A4AA39A43BCC2C8
+:109EF0006D561AF5C5F00C8F299BD8EFD851F40791
+:109F000040BEC14C96892F298DCA2F0BE9F9CF721B
+:109F1000384A788A38577F05791FEA297F3EA1AAF7
+:109F200066B2983F9396B9FDA2068ABFBF5AEDDC90
+:109F3000212F9BCEB70CF28E3D1FAE652EF7E55C50
+:109F40007C500E94C6EF1E433E0C35AC8B95A31788
+:109F50007466E714F845A66AED94CBE3B1A7181E22
+:109F60001062C2B3B2CC38627EF5AB4D1EEF40A595
+:109F700088E771C23E637847A4995C4FE3DFEEB691
+:109F800083398CA3796F0B59387FB2F524C8ACFEA6
+:109F90000F1B6490DA110EBCE6A1F95C6592BE6AF3
+:109FA000E1FE9DC5FE211D9155AA63DF42FD39B931
+:109FB0006F35A1FC3BE1CFC9CE78667FCFB3F0B35C
+:109FC0000553F8B34756B178B1A2761E2ECE8FBA9C
+:109FD000AAF8B19FC90B3079D9C7FC46C614C8305E
+:109FE000BF11E13DCC6F04F2270D2A077A5AA8DC95
+:109FF000854D57E2F9596AA4A909E3A59F8E7D9082
+:10A0000055D98FBA83CE55029D183FDF69C3EC89BD
+:10A0100084B03867F941FFEF3A301EB3D3CF618087
+:10A02000890ECB01CB7D18EFDF19E6ED7F26873A4D
+:10A03000F13C62BF384702C5D2DE57E0FFE7652F2B
+:10A04000D18136106FFF9B5EECCFAF08383D87F0B3
+:10A050009984191F111FBFC6E1C681B9D43FA90059
+:10A06000365E7C601E1F6F01B7EFA17543053EF69B
+:10A0700091FCDF84877048736B1D1E2A836A9A8067
+:10A08000DBCDFE5A817795FD8092E4FB9D882B9570
+:10A090005E3715F6358147A5F907F44B317EC1F4DB
+:10A0A000701AC7FDC7E2FBF45B3DEE7EEFB9F145E8
+:10A0B0006D9F482B8CC57F29277585C161EB70AEDC
+:10A0C00089C1911B72695ABE558EFB6B5917F1D02D
+:10A0D00024AD7F9BCF8ACEED8EAB5DF3E88D5A74B5
+:10A0E0002EE90FF1F5572DBE2B719C827EE0E9CE53
+:10A0F0008644B874BBFA8467CADE62FFCDE80A4CB6
+:10A10000D96BECBF5AABCE01D7B45FE4A81F36E7DA
+:10A110003BDE7BF57738DE9FEF3C5DE6A2A3D9E618
+:10A120009F80636E3AAB963BC510FB5C9ADB8F93C6
+:10A13000B0D88F2BC167163A61DEAF0F6EAEE1F675
+:10A140000DB763FE13883A6E3CCC02FD2B633D0EC7
+:10A150001B1E096CFB36D732BDFF7EED131487B38F
+:10A16000FA15F05F353D4E97EE4C519C2DDDE7D34F
+:10A17000FBA31477A338DB7666C8FB58B9CD9BDC0C
+:10A180008AF27BDA3F370B11EC37B502E3D6FDAE2E
+:10A1900078825B9EE29FBAA9E879995D8EF4F0F827
+:10A1A0009F0D6B8DC5F300EE55F879FD77BDC97B2A
+:10A1B000110FD48D40715AA075E035F8FEF87CD3AC
+:10A1C0003AF805F9FFFC7C4C85F4B166464F86F9F8
+:10A1D0006B3B0DA49BAF9391A6755A9C3DDF5BEB47
+:10A1E0001136DD04D94F998E990DB89E6A94093ABB
+:10A1F000B7AB8917C7E77EC523E6EDD6B2F4B9E75A
+:10A20000E3560CB4B2767BE7481EE2FF1C4FF61013
+:10A21000C6A31A3DB4AE775BEAE378D4BEBBADEE1D
+:10A22000268AA75BAA47263A725AB1753828ECA647
+:10A230007E113FDDD3C8FDD6E73B5ED7F0BC668F0D
+:10A24000D949F9004AE687D47E58F03BB3F804C5F3
+:10A25000C9874B9CBFF429DCCFEF0F07BAB345DFAA
+:10A2600047E87DA6A9E38587900EA67F0F917F061C
+:10A270000D5B181DBAA52F417EEF9D63797E81721B
+:10A28000B5DA437216C1B89C8CE7A24EFF79EF6A2B
+:10A290000F9DB366F49089F6FB29EB0DA08D48D194
+:10A2A0001BF07CB1E6F8953AED95CCDE6928B0F369
+:10A2B0006B56A556E07CD974F9607DD1F990E66EB5
+:10A2C0004F223FEF5E0206FA63BEB95DB94758BF41
+:10A2D000A757FA7454055787AFCE7D13E5896D2BC8
+:10A2E000E827FBA2560EED267F77100CF63E123BB8
+:10A2F0004C76941693C142BBEAFFCA345F4C671098
+:10A300005DCAFE9547D7B0F6EA6ACF2CB2CB5AF9B0
+:10A310007EA3B37FB8DF6871A75D257B73D4DFFDB3
+:10A32000E38FD3B9B2EAB2AB1428A88F76D7EA0D7F
+:10A33000EF692EA20FEC521E8FD0B92EC8B794B57C
+:10A34000B343C73FFC0F2F16F0FD84E2B2D385FD67
+:10A3500066F753CA7E3BDDB3F51F5E64B29CF4F230
+:10A3600038A8A25ABFC47579429C2FEE75E5DD244A
+:10A37000BD7CBD9C16EB186716FD6DF48F915F03D5
+:10A38000D76CE47E16980E3F86ADF7D34A819F6D59
+:10A39000EF7719ABBC3F3195D712F2C7CBE4B5AC20
+:10A3A00057928AB74C5E8BBD5E47575B1063F33B99
+:10A3B000560BD93E9CDF35166C467995C0ECD379A7
+:10A3C000FD09FB1CA509E5F01AD882EBD7504C3CDF
+:10A3D000871C6C7E3773144BE3AB449DF251691EAE
+:10A3E000B7BBE671B6D769877B2151936BC23846FC
+:10A3F000EC26C463775435713D7A3DB76CDD644C0F
+:10A400009F4758C1F586379A8362E3DAFCBCC36B79
+:10A410002DF4629C5D358F2551FE3B55F27BDDF5B9
+:10A420006FF58A3C962650D03E4BE33AC1F5DB658A
+:10A43000F1BC31494F3D6C12FA09C7B956FC4DCAFF
+:10A4400067FB940CA919AB006EF436713DD3B19142
+:10A45000DB3DD78324D762FD24ED5F0D962EB1BE80
+:10A4600061D4B6CBF4DB62EB0BF4E48D423EA7DEA5
+:10A470002763EF73BCF7723CC3C26ED637C7D62FC3
+:10A480002AD2BEB6B89EBC5EC8F58D5E614FA437B9
+:10A49000535ED0A0714B02F93CB0C632B7A0D64291
+:10A4A00019C17C941038EC6326DF37223FEDF89118
+:10A4B000A227A8B4ED8152F3EFB603BC3167DE49A1
+:10A4C000B5E7B6F1FD37951DC7BD3FDBF96DA8F9BE
+:10A4D0000AF9E4157C6815EB65CA5ECA88F56E5208
+:10A4E0003E90AC5A498C4BCA1238ECADBD425EE48A
+:10A4F000007FEFC683F9CF77E13A952316F9D7109D
+:10A500006AE3769B621AEB8BE06F9F733E21F278D1
+:10A51000E39977D3FE3756DB49FBDE805E5E7FD85A
+:10A52000FBEA1AB841C3B8DD6069FD3156A83FD4D3
+:10A53000A8C7B98E857FCFE8378AF1D9E6534CC4D6
+:10A540004BFBC31B6365E382AEF31553B51E22BEFE
+:10A5500094E6DB23E7C3B7319157B763F0E51744BF
+:10A560001E82535F2F2EA9AFBFE0D0A7425FBF8DE1
+:10A57000FC7FEEADE07FB57118FF76D9383983A93D
+:10A5800078254DF48C1AFBD2148FC1F58D7640A638
+:10A5900083F215200EA417B121EA3BBF6111DF023F
+:10A5A00022CEA4363AF719391A70C0B1EE3460BE23
+:10A5B0001AF68B74FBB7AB34AECD6F66B3503E99D1
+:10A5C0006D5FE272427FA4547E9A5DDAF11B3CC655
+:10A5D000394BFBD4C78F207F4F8580F687D2F43B61
+:10A5E000C789BD37515E3FB9EA4348315E2F722EAD
+:10A5F00038BD9D02AF17E8B5FFE3D227D693B775F4
+:10A60000931E058F89F1CBFED8464832BC8780EB7C
+:10A6100093112C57623EC9121DFDDFEF7A0DDEDE6D
+:10A62000E0FE9D4713717AA33A7FEF6EB60F15B324
+:10A630007F2E56B97D7CFA13A9DF625E427AA76449
+:10A64000E0FE76B2274FF6D3A6DC252AE6A55DA26A
+:10A65000CEA47A9BF637A96B0BD6E726E0E7FE0C73
+:10A6600011B5508FDAEB4FCDF85E403A4F64785C0D
+:10A67000E344E6DFE85CFFC401398B4C3D31726393
+:10A68000D9F57352E86DBBDEC903B285FDA547A4B9
+:10A69000EC02D6FEA462458AE60140969F070BF8BD
+:10A6A0008319D92197A7772455D433277B34E967B9
+:10A6B0006C6E6E473A19FE9B324D2AFA6495E89A01
+:10A6C000A13AE7D3A67310F3159AA6F27706A36F03
+:10A6D00010BDA7D873B94C3C69A7D01383D1E2FA57
+:10A6E0002420CE5F03DE6CF1BC0717BDC116E7BAAC
+:10A6F000B4F11B16F914C33AC76B38E6A179186E8A
+:10A700002CAFC706C43CD8F50663FCBC755049683D
+:10A71000D5E0E3D59DF8941A475B75B80BB7F91AE5
+:10A7200048767536117B5FC63802850E0DF49F9E04
+:10A73000923EC4D6CB0F6F0B59520C1F4EE4BEC9CC
+:10A74000E898C5FC1DB44F752B2BCD6DC3BC4E19BD
+:10A75000306EFCC89FBF917B15FD51E6FF205C6BFE
+:10A76000A4D65F6B601E5C52C275B51B953F75FE2B
+:10A77000AEFE8E56B1FE18FCD1A1CEB5188754207E
+:10A7800021E2191E03F3F568E97B4AEB09D49E67C1
+:10A790007D53ED4AD2E9F28B7CB0A1BCFFBD95D7C9
+:10A7A0004FB37FA87766B9FCACDA6EA7DD5DE37ABC
+:10A7B000BF57C86B29BFF2AD1A6726BCACE1B9AC74
+:10A7C000D6E6D1B3581F52B5B8DF466E5100EDF84A
+:10A7D0009986DE8B21BE4A7CDF053CCF0DBF8828E1
+:10A7E0005C7F9F51B91DDB78E7A725DC9F4EA197C1
+:10A7F000BD18E1BC594C7EDD76DF887182E2894369
+:10A8000070B4AB19EDF92D1E3A4FDADDB6AFB6B024
+:10A81000FD77C43853F30F86B29C4E65C99F57DB52
+:10A820003C16EE5BE73BFF6E3FB9D2FC376C75DA46
+:10A83000C5E73A2F2F21E2CB2ACFFF858E63CFDBEE
+:10A84000F4F5C1F566E39D2F521C67CC2CAF6FA6C3
+:10A85000CFDBCB346F9136B08AC5717E2CF6317761
+:10A860005E9F062930313FF115BEFFC8CDCB63078F
+:10A87000CBE81F39EEF23F443FF90F021CC5FD56ED
+:10A88000312A7C0F7778BFC2F6CDE0F62BF72B4B41
+:10A89000313FCBA23CAFD11E8B9E4FCEBFCF23F01A
+:10A8A00095C0B35CE81583CE3FF72B646F78E02C3E
+:10A8B000C6414007C3963BC07A5DFB158AC7182284
+:10A8C0008F80559D89ED80F4D2624CF6ACA7737AE7
+:10A8D000EA073BE271986E0EB386344F5ECB22BC22
+:10A8E000948C7627E3E72EBF800D01D70A581770A6
+:10A8F0009380611FC14195C11897F7667482030266
+:10A900006E12709D806B053C5FC0D23E8277A9BC01
+:10A91000BF9D4A96F71F10B021E03A01EB029E2F2F
+:10A920006038C8C7F77118F7438283026E12F00CC3
+:10A9300001D70AB859C0D241824BCD5F206E117F3A
+:10A94000A7E6BF8BF30D40F89B0917DC3D55BFC050
+:10A950001F1DEC31A4C2F3436F89F8D3121FD73304
+:10A96000131D09CA5362FE42FA44E1B963ACB8BC94
+:10A970005BA2DDE4B97994D52B1ABFEE2DBA2EAACD
+:10A98000C56FDD79E2F7DEFF20FC6EF6D9EB9EFBAA
+:10A99000E7131D26E1E9EECFDD0EED2D2838A70FD8
+:10A9A00028D934C66B988D44FE8E5773E6B3DEED1E
+:10A9B000E3E79CBD3E9ECFDA2FF09BE8E0E70F83F4
+:10A9C0000B02D983D2F438E35FF8783CE1FB369E82
+:10A9D000DA61F27B8279B662C90FE27ED468BCB3D9
+:10A9E00042FEBAF2FF0AFD65771CE4DFF01D1B276B
+:10A9F000102ACEA7BB27F5CD2DE913ACAEE667CF65
+:10AA0000D19FD1A3B1C6C2BC69F11E248F4CFAE517
+:10AA10000CAB67E78BC8D43F8F1737F278B12CEABD
+:10AA2000D3384DFC3B066B09EE33EC798B18479A13
+:10AA3000DEAFBB5DCE57C7E74BE063E7A7C8F01CAE
+:10AA4000F533898F92207EB99F631EB21EBAF0E75C
+:10AA5000170A7B8D12E365F8F94BA5F69F15F232C4
+:10AA60004D3E4BCCEB7FF3D976CA610BF3816C3949
+:10AA7000B2E5EB7CE5E882E50437A4B6D2729286B3
+:10AA800014AD1B055DCEC5E72E2F45E4245758BFF6
+:10AA90005EAB15E7F926C90BC34721B9D5393EF599
+:10AAA0004BA2D49F846B7C21F62060E403A3F75271
+:10AAB000AD56F081C7290278CE58D09E1147F84A8A
+:10AAC000B224F43EAFB746E3EB7C756723C71F445F
+:10AAD000FF2E7C597F5A617F3234BAE49CE3FD7EBD
+:10AAE0008DCF2FAB4FDFF94D1B5F91085F191269B6
+:10AAF0000F6BF75151DFADBFEC7287C06FD4035BB2
+:10AB0000F977920928FCAE32A879C4778F7C9DB979
+:10AB1000F59317E56AE9F9CB55B57ABD5E2BBEEF23
+:10AB2000303DDF82F1BE52FBCE316D723F6811F3D2
+:10AB3000764EF3FE6BD443CBA6E6B35A7C2F15E3D7
+:10AB40009E2BBE27A7E35B959CBD21F444B5F8ADD1
+:10AB5000394FFC5E76E1F756C9F519B11F558BFFE9
+:10AB6000FBCF531E7E309DBF55AD238F766EFCFD0F
+:10AB7000E879E2F7CF6EFC4AAC5B55E3FC4A0397F9
+:10AB80000F459CBF548B5F4F65FC44BED8BA012B68
+:10AB90004EF61AF9E3BBB5750369650A3F0BB85E5B
+:10ABA0003FD7F1EFAF7AFC770F58CAD4F88F68EF30
+:10ABB000768CAF2826095BB5E33E5AEDB8E9F73944
+:10ABC000E87E7AE47D8E71CF97EF5FAC7AFC5B1DF7
+:10ABD000743F3772AB93EE9049F9C4D58EFBCDF339
+:10ABE0005CEFBF14F80635DDB10F94B2DFCF08BBC0
+:10ABF000F6839AEE90E352F5DF10F6CABBAAAC7F5B
+:10AC000052F4DF6CE353A1FE3D02FF7BAAACFF6B65
+:10AC100081CFCA2AF1F9BE5887A5F6CF80E07B1014
+:10AC20007564815F73A1794B5B7C49C98FE79CCFC9
+:10AC3000F4D077826F289A8EF14EE802B2C7FDC732
+:10AC4000C307795E495AF8FFC9B4C4F530C5B7BC2B
+:10AC500051D3711E67FB5D8A92B08A9DB7D5FAB950
+:10AC6000FE9374B39BAF7715300FA954FDA0BF7846
+:10AC7000FCA5062628FF0462E21CE9CC8D46D173B0
+:10AC8000022541792DB2AEC24136CE40ED46A33009
+:10AC90006F396EE313B3081F55E7F8A88A6915CB1F
+:10ACA000539EE3E7F36AF763FB87526C02F83D0EAD
+:10ACB0001CBF417FA21BF3C4D3B52AF16920EC3C31
+:10ACC0001FBF49F4F34E41DF80B77C9E58E7CC7636
+:10ACD000CA57EA6FE7F94A069894DF39102A7FAF1E
+:10ACE000C1580F8FFFEF14F94F23F8FD287E4F8CCA
+:10ACF000DF8F2EC4F65FA1EFF04EB57ACADE8F1358
+:10AD0000369D71F6608BF37B1E3B2EEF379CDFF593
+:10AD1000F862CEEF7ABC3315CAEB1A08F1F3814A18
+:10AD2000F8DB79EF76BD6125A5E945F994759C0BB3
+:10AD3000F8624E7CDF3EFEF1F641EF61BD185E6FBA
+:10AD400015DF4AC51B26E9AD515359AE371CF91919
+:10AD50003D42BE7C355A0AF532D3BB25DE0778FB6F
+:10AD60005082F243B458C2A078B4D807345C0F05BF
+:10AD70007CFAA4BD2E031E3BDF98F23A24C3A2F353
+:10AD8000470DD79134BDDDE4BCDA72FFFBB5315A13
+:10AD900027F51AAD13C998A0EFBADCE32CF45BFBDE
+:10ADA000FC783EE6B71EC0D2FB0739596CBDECF506
+:10ADB000733DAADD9030B4F9E4AA92DDE3C6E34B1B
+:10ADC00062FD856CFCD316E55F548BFFA355E26FE3
+:10ADD0008FC3F0FF1CEA5986FFE7B12C85FF534271
+:10ADE0001FD581D14B7BB6C1F52CC07AA330BE1ED6
+:10ADF00008F07EEB849E02E870E4F578055DD5D21C
+:10AE0000F3ACADD72AD0638FCBE87951CCC777CAE2
+:10AE1000CDC7B7053D8100DFB7B40309832D4DB819
+:10AE2000B8C4BC9C1078CC0C88B852BAE39CE4EA55
+:10AE3000A52AE93831352FAF8A79F9E772741C17E2
+:10AE400072959161E549DC4F9BEDFC850D8E7999FA
+:10AE50002DF893F1D9F3D2E99897DA739C975F555F
+:10AE600049CFECA979392DE6255F4ECE0AEAFF5E7F
+:10AE7000D4FF83A84F76E2ECC0EF06F0BC6CA13F94
+:10AE8000E109D44FED6FAC9E1C583655EF93A347A4
+:10AE9000EC7A3EAAD735594F0B14F407E9D706F0E0
+:10AEA000FC7B507CFFF1FDD1F035A25D84DADDC082
+:10AEB000E961ED6A0AFBFFD2E82B76FF33B05EEF63
+:10AEC000DA3FD8F5A285F56607FE60D78BE173E916
+:10AED000C0647F0D85789CF0FFEB00CFD771E57BD8
+:10AEE000E9D5E53B78A349BACFA10EC2199995439C
+:10AEF0000ABF5F21CD8CEA43983FEB4BE6A00ABB2B
+:10AF0000CBA3F1763E666FE1F9F10C1D9EF71BE8CD
+:10AF100082987080BDDF1355C81FB8D39F6C0BD4C7
+:10AF2000733C290FE0556E8FF586DA441C85E3B536
+:10AF300037F88111EC4F677861FF9F0C469EC7FA86
+:10AF4000FBE6A894CFFBFC9CBBC84EDCDBAB00BE91
+:10AF5000DF7B9D4A76E203AF86691F1E54CC9B2897
+:10AF6000FFC1520DB41BEF0EFCE118E6298FF7D696
+:10AF7000E8D255440FE19FF640A29FFAE776E776C4
+:10AF8000863FE603D3D685FD76713F06449EF3DD0A
+:10AF90006B0DCA9B3180DFDF34DCAE529ED2DEC641
+:10AFA000F91D38DE03ED1AD91D0FDC30BF97F2B959
+:10AFB000DB0394FB56173224CCEF89AC50013F04DD
+:10AFC000A98B1ABD6877869707F0CE2FA86BE4E3AC
+:10AFD000851702DDF3E7854C22CECAC8884AF738C8
+:10AFE0003D70C386DC66B46BDA79FE3223ECE5F89B
+:10AFF0007280906025C83F00C4C73B9B9FE7DBF38E
+:10B000001CC94CB62F7B8E18C956592F575DBDF001
+:10B010008842F9C915EB65AAAC97ADB25E8ED7AB85
+:10B02000787E2FF22935F60FE3707E773E76A8FC06
+:10B030007771E79AAFBB37E0CCBBAED4DECED3ADF1
+:10B04000442F1E664EE22957AE6FE7D9957AEF9DE1
+:10B0500079570CBF4B1BAEBF5794F7F1B2413C6F11
+:10B06000D81EA3FB221BC4FB86FBE8FE48773F7F6C
+:10B070002BF4710B24CACE439DC0FF75863BC6B32B
+:10B080005B940AF900EE7C3F97DED3947427ADDB26
+:10B090001B787ED1E4F7938DE2BB114825E214CFF3
+:10B0A000B2228B674EAD1FEFAAEFD2FAB1BF9B64FD
+:10B0B000F3C3BF9774C9895B2E7CAEFC940B959348
+:10B0C0001FBF4D72E21D91AB5A3FDE4C95F5B25554
+:10B0D000D6CB55574F1D91AAD22B6AA6CA7AD92A28
+:10B0E000EBE578BDC195AAD8D7470731BEE5BD428B
+:10B0F00073C08357049CEFAF0C39E0A165CEF6EA2C
+:10B100007267FBA1E5CEF6EA0ADEDE0CEEBF261D75
+:10B11000AF7E9DFCAFF35C272D5AF9FAE1F60AEBFE
+:10B120004AD3FDD8BE4E3100EF1762FB5556EC5B9B
+:10B1300045E33FEB827CFD5F17D01DF7D3FDA9D31C
+:10B14000D912E4F8DAF456C2D7D6BFFF220BBBAB54
+:10B1500044DE3D7E564079D830DE80FD3D7FCFCC49
+:10B1600006B4E7F6BEB682EEEFE87F979D376352EE
+:10B170003EA472EC9764BFECDDCEEF977EB4D6ECC4
+:10B180008AA3BD12F600DACBCC8DA27B3DF6C63C7D
+:10B19000648FF45F5DFEFE924FF5F03CA187D1EF26
+:10B1A00067FAFF80B877EB4171EFD6FD3D0695BB9E
+:10B1B0007B5AA8DCD5635239DAD3CEF3197B2CF154
+:10B1C000DD5917955FEA49D0F32FF47453F9F99ECE
+:10B1D000243D7FAA672B959FED49D1F3433DDBA921
+:10B1E0007CA2274DCF1FEF19A1F2B19E0C3D1FBAD3
+:10B1F0007A03DD9371EA3E0F7D1D520AFF392967FC
+:10B20000DC61F65667DCA121E98C37CCEA76C61BF7
+:10B21000F455F31DEF236DEF70C0A1D6258EFA8192
+:10B22000F8150E586BEC74C04AE89D0ED87C6E83FE
+:10B2300003BEEC999B1D70EBD39B1CF03B3EFD11B4
+:10B2400007DCF2A93B1DF0C5FBEF75E0171FEB73A0
+:10B25000C0EB83F3F97DE0033B1DCF8DFBF639E0B6
+:10B260008FCCB41E0B623C3413E1F6EC7189F6C14D
+:10B270001973CDDBF03B29F8B14CF204519E0F3F1E
+:10B28000637EEA72BCA70C94D48A1BC395EF91B677
+:10B29000E33D72A43D89F27AFA35C9407B578A6C46
+:10B2A0005F58E8CFD9E5D65329388C71499167A604
+:10B2B0005F0496C5DA05983EA1C34548E57650DCA3
+:10B2C000D243DF5165A424E59B309BD9FC2B1DF3B1
+:10B2D000E8DDFB6F90ECF253519ECFDED1A9350D26
+:10B2E000B0FABB17A926A6784DC3D775BFDDAF82CC
+:10B2F000DC0FDEB583C72BF517FC4D1A6B1F32939D
+:10B3000033D055B5DB8572DFA3EF944286B91CFDBF
+:10B310009A503C039B43588F7FD7C7EA7F3558200C
+:10B32000BFA164CE5259FDD89664B387D5DF2DFAFC
+:10B33000DFBDECC7748F6038F713B898FC9DCFD091
+:10B34000F8E1B6A3707B18F5D338AC2BB28E77FF3B
+:10B35000BEF8F748E34199DAEFEECD82C9DA05721B
+:10B360005FA77B38ED7909B61E8524F6BB6A82BEDD
+:10B37000A1DDBD43A27E764B2FC56282CE5E179DB6
+:10B380008817D2753BEB27D49D94D6B5F2E7CDE173
+:10B39000A97EF1FD667C7F4B4AC23CF76AF8A72282
+:10B3A0009F928C7FB8DEB664A4B2FC337216F25B57
+:10B3B0008B57E2DF839C7F8C6FB7B74EE7D764FD76
+:10B3C000F45158DE5AC06FD11EF9727B11BE4EF295
+:10B3D00089B54F52FB97606988B7433E8419DD9B5E
+:10B3E0008BB5935E12E3649DE3303EDE4ECFD322F5
+:10B3F000BEC8EFF5B4F344ECFAF8D7B55CE42932F3
+:10B40000BABDE3B59BF1FBEB8ED624DD033C18F20D
+:10B41000D0FD4283A1AFE4E89E7E1DE8FB5945B113
+:10B42000FA7E14E571E83EA9D83A75FA09F8654A3A
+:10B43000E1F76403213B0FBF82BD24EE1596C5BD25
+:10B44000C2AA92E86AE2EBD9EC85A9F8EAF4F1F72E
+:10B4500011DD72CCB9FF0E6C71EE7B71FD668A63F3
+:10B46000F747ABFB6EC897E7F6A52AF0F1E683FC39
+:10B47000BEE3BC9FF0B4F233A85C93AFA5F2AAFC84
+:10B480006C7ABF3ADF40F0AA7C33C157E69BA8BC78
+:10B49000227F293D5F99BF84E0F6FC522A57E417CA
+:10B4A000D3F3E5F92B095E965F49705B7E2D954BD2
+:10B4B000F31D542EC95F4FEF17E7AF23D8CCDF48F9
+:10B4C000E525F9F554B6E4FF8CDE2FCCDF44F0C55A
+:10B4D000F9CD042FC8DF46703CFF51829BF31FA6B5
+:10B4E000727EFEBF52D994FF18BD37F21F27785ED7
+:10B4F000FE1E82E7E6FB099E93EF25B831BF8BE085
+:10B50000D9F9512A2FCA3F4065437E2FBD9F957FB1
+:10B5100088CA99F927E8796DFE712AF5FCE7C57D9F
+:10B52000D14F5119C97F95CA70FECBF43E94FF1BD1
+:10B530008283F9AF5319C87F9B4A2DFF3C9595E64E
+:10B54000A9D2F74F6B6086432E56E72F72C0574E35
+:10B5500038F7EF953F77EEDF2BC69738E065C79C4D
+:10B56000FBF7D2A39D8EF78B8FBCD3015F9273EE56
+:10B57000DF0BB3CEFD7BC1814D8EFACD998F38E0C4
+:10B58000A611E7FE3D2FEDDCBFE76CEF73DA2FA9C4
+:10B590009D0EB861AB73DF9E050FBBF2C90F3AEA8F
+:10B5A000D7589F73D40FB77FC575BE92E5FADFFCFD
+:10B5B00086D38E6979A1E8394C7CFF75F4DDFEA94C
+:10B5C000468FB86748DCDB2AEE4773CF679DD00310
+:10B5D00033F2DC7F8A8A75578FEBAE20EF89D91959
+:10B5E000AFA17EB0ED8C19F38D2FBFC8E0D373559A
+:10B5F000B397C1B69D61D7AFF8BB15AA399E6678DF
+:10B600007A8FFBE8DE3929D26D615CEDEE1312DD35
+:10B610006F57371B449EC0755D3C3E01F67D3A7402
+:10B62000BFCFF01CFBFDE66B298ED1C4E123A11D29
+:10B63000EB308E3AECB5DF7FFE5A6AEFE7F0FF0899
+:10B640006D19C2F775358763681FED2A71BEF93F22
+:10B65000432AF1B33664FD30B46CEA9EE9E3D1E4E9
+:10B66000CB21F67C9B969C875776E33DF7788FF34A
+:10B670003AC5FA11D65BAF58AF84685F70FA0FEF26
+:10B68000C7DCD765742FE04FF0BD1C7996F6A3BADE
+:10B69000EBEFA3FBAA86C30C9F50697CFE3E244FB0
+:10B6A000EE3760EF37F3299E4AF6E05013D0BD190C
+:10B6B000C3B58934DEE797FE8E06874CA43BC3935F
+:10B6C00095447EE2F025862D178EFD092091C33822
+:10B6D0007E301932D05E0BC151CABF88C004953A82
+:10B6E000E892E3BE6D9BFE399C7EBCFF3F44E7F0D1
+:10B6F000D6B3E314674D81B8BFFA4D7CCEF8723AE9
+:10B70000B4AC345FAE91EF039D8DFF28B327918ECB
+:10B710004781E33B86FEA98478A6F466EAD7798F51
+:10B720008472FCEB243776BC47915769CD488FB8BB
+:10B73000C7A18BFD43FBB03E513EDEE3BEB7E15CEB
+:10B74000E33DD1B03BDE13A2F3E453ADE5BF83B3D9
+:10B75000E33E63ADE5CF7B9F157EDFD7C479EF3342
+:10B76000E2BCF72BC2EF3B2CFCBE2FA2DFC79E3FF3
+:10B770002DFCBECFA1DFC7E027D1EF2BF8BEE4C977
+:10B7800012F7BF2CAC95849C6D27FB3E28EE2B62F4
+:10B7900023903D1F10F6FC98D93713FD8E602D6461
+:10B7A000D14FD87ADD41FA7E969162E2FD0077FCB6
+:10B7B000E2F599FF85C1F11838EE770AB4BAEE4B7D
+:10B7C000A8348E92B5B0DF20F31B326669FE9C73FD
+:10B7D000BF5A16FCE7D52FBFE7C7BEB78D71328DB4
+:10B7E000F21744BA7594ABBFA1714E897140FEC186
+:10B7F00011BACFF07205CAC9C1B471CE51FEB68478
+:10B800005DBF4FE1923FC0840D46EF3CF1BDA611F4
+:10B810004A37EF61EF9FB84F757C9FED96C7DED733
+:10B820007C14871D5CCCEFE579B17EDD45E80F7EA9
+:10B830007AEF9B4D889FFDDD52BFE98C5BCCBB0F3F
+:10B84000A4C27C9603623FE8D7CBCBB97DAF78FF2B
+:10B8500058F97A0F8A7A5F0C5A7D61D22B13741FC4
+:10B8600064FB89AE9B11DFC77668745EE36EF7C533
+:10B8700060726778D9743C0BDBA3BC9569BFAF5C81
+:10B88000FBE53FEDFA29946FFF70B8BE74FBB697E5
+:10B89000BB1EAE80FFC1E2E3A71FC376F3623CCEBE
+:10B8A000D4DB3044F3BB6B07F79F5F5CB48EEE993B
+:10B8B0001DA8E5F356A4DF2F54E04B7705BAFEAA86
+:10B8C000527BA93C5DDF2CC717C6D76315F8F29DE4
+:10B8D0000A7C3D5001FFBF2FC1D77988F73CFC7D22
+:10B8E00038D6AE770EE32BFA6FC85798BE1E8AF48F
+:10B8F0007BAC1C5E55C8EBF805CAEBCF2BF0B592BC
+:10B90000BC4E5CA0BCE64BC92BE27D01F22A47CAC3
+:10B91000F3B592BC06231726AF33CAB5AF425E67B4
+:10B9200097C3BF0A796D2E36BE0F8216DAD5A75A95
+:10B93000F939D9D60E7E3F99B785EFC3C1E39F256C
+:10B940007B6980ED5733DA71DF3EF1E01D6D53FB0B
+:10B95000B47B1F72F7E7DE47EFF8DF9FA17D342449
+:10B96000F67D1B1FBFE1EEA7FCFD16E73A6E007FD8
+:10B9700097A9E0F72E1A926FF578CE7D3E60F2F12E
+:10B98000818DBF96CE159FA673C59AF60B1DB77C09
+:10B99000FD59DD1766177C28E2B40B666FFFEA637A
+:10B9A000741F89E867B662D1EFF8297035BFFF646C
+:10B9B0001BCF1F92B77FF9B1934B0BEE9982C35205
+:10B9C00061BE90BCEDF063270BF0CA63FC87C79B98
+:10B9D000298F31AE5F11A07BEBC6CA9F67FC40EC9C
+:10B9E000E3DF17E71947C479C677855DFBA2B06B23
+:10B9F0005F10766D4ED8B57F2BECDAE7845DFB0DDA
+:10BA0000719EF1A0388FC8F41C20784F4F56FC4E21
+:10BA1000C993E2774A0E8B7CC967F9B9454F8EDB33
+:10BA2000C78F7FAD19F93145873B8EC5E9B0EF4728
+:10BA300077D3F12ED379DFC6F52D41C7BC5D6738CA
+:10BA4000E322D7C6663BEA5FA3373BDEAFD52E7550
+:10BA5000BCEF80A5CE384BFE0A679C65C21917B9AA
+:10BA6000F2E7CE738D95E3CEB8C88A63373BE32CFB
+:10BA7000479DE71A4B8F38E3228B73773AE0CB9FD1
+:10BA8000BDD7517FD161E7B9C6A54F3AE322B3BA1A
+:10BA9000F739E05AEB61E777F5EDCEB848D874C6D0
+:10BAA00045822D5F71C0EF61FB3DEA4FBFE18C8B9A
+:10BAB000F862CEB8C84F43FC1CD0F6B359BBBF8B5D
+:10BAC00090BF19CA5DC9E4FD8928BFE7FD09485246
+:10BAD0009E2CC09F93DFA04CFA0D16AD7B59E81D3C
+:10BAE000B5E1E48FD1AF517673BFE70E69454E2BB8
+:10BAF000F47BBCFF2215CA87ACBBFD870AFD7B4DDA
+:10BB0000F277940A7EC9F47EB9BE9ABAE7BC2D8D4D
+:10BB1000F954CAA45F72BDCB2FD996A1DFB39A5155
+:10BB2000DE2F9936CE39EA9FD391127E49CC43FC61
+:10BB30003314EE97EC32855F02FC7B29BB3F5BFF41
+:10BB4000A80DE5F5887D5F8BBA88FB0D4AA8F879CA
+:10BB5000B67DDFA4BAB87C7FB65FF37711714F5C16
+:10BB60000D88B8FEFF978FB7523EAEAC29113779DA
+:10BB70009BE5A354BD73950F057506E5837C70188E
+:10BB8000F3417C2E581370CDFDDBD6E1F74DDB8100
+:10BB90009FEFC02BFCDED552FDDBF95DF155B7966A
+:10BBA000CD83B0E3AC522D3FFF8CB7DF4AF993A7AA
+:10BBB000D818E5EED576E75BC8D114FEE81E7ECF37
+:10BBC0005EF4DCE79FEA785C28DEFD81B2F68AFB52
+:10BBD00077C1E256F97B764705FEDF7E7516D9A957
+:10BBE000BBB6717DAC747FF37994C74FA33C9A14B4
+:10BBF00057D12E41BAB62974AF5AC8008A0FCE0D5C
+:10BC000041B6B709F96AA6F13E2FF647E7CB93F2A2
+:10BC1000B9CD79BFC9EF74BE9EE389F27CADF8BBA4
+:10BC2000062B0F77D0774206A4F45A5A3FF07A9445
+:10BC3000F023391D6E37F9EFDF317C747D7A7B3765
+:10BC40005EEEF5A96CB98AE24AB3257B7D064DCC40
+:10BC5000D739150A95BDEF6D5ABFE7B81EBF306DD5
+:10BC60003DDED0F78F38EE9888236D677F05E79D1E
+:10BC7000EEFEECF568C3DF7EF56EFABE6578EC4E3D
+:10BC80007E6F71A3B81F6C8CEBC752781D1272B413
+:10BC90005BD88587F677F6217F07D8BA29D4470B7A
+:10BCA000FEF2BD81243F5FACC3F23307F877DB17A8
+:10BCB0003FB4453CDF44CF1744F9FD470B983C6146
+:10BCC000CC3BBCEC158DBF7F59A7FAD1F1117C7F1D
+:10BCD000B178BFA7BDCDC2DFAA8CD4CEEFC4521EAF
+:10BCE0003B4A7A97CDB9B5C0C07115FA1D9DB923ED
+:10BCF000F038D231772CB1E13AF40FD2C07FAF2DBA
+:10BD00009ADC89F21AC900F597060E1BDB759ABFFB
+:10BD1000F858721FD56FE5F5D97B82E7A6F8FBE0EE
+:10BD200018C317C733D97B03DF73FC1BB7E814AF05
+:10BD30000B8D1D4DAC257FC46ECFE1865B787B6596
+:10BD40008CD183ED6376FBF10CBE9F15E5EDD5310B
+:10BD5000BE3FEE69DF44F7EAB1F1E9DE29AF78FED4
+:10BD600084E07FBCFB5F336BA35379196966FFAE38
+:10BD70002FB29EED756FFF0E60BFF80E49D3663F80
+:10BD800072B2E05E06FB77430363CEFDF94C0D5FB4
+:10BD900097FF1DF5CCB2CAF7B3FD3B5950D3F30062
+:10BDA000800000001F8B080000000000000BC57D14
+:10BDB0000B7854D5B5F03E67CEBC3293E4E43D79C0
+:10BDC0004D4E2040944007081810DB495444458DDF
+:10BDD00068DBE0B53A04E419202296A0D89C9004D0
+:10BDE000F20206EB2F111126281A2BE86041B15AF6
+:10BDF000EF80B9147B6D9B5A2FA2A28DA05114B86D
+:10BE00002915C9DF5FAFFF5A6B9F43E64C2609EA4D
+:10BE1000EDBDF93ED8D967BFD77BAFBDF60E6B102D
+:10BE200059C8C6E8E79B61F09F1A63CC5725B2500A
+:10BE30007E58BE32C3989F3BCC58FFF64B8D79D7C6
+:10BE400078633E798AA1FDF91B18EB744246F2D85B
+:10BE500018A4D2D1DB6CA56318AB4D5E4EF9DEBBE6
+:10BE6000F4726F0CE6F3E418912533B6AD400C3450
+:10BE7000E532F644D5F2C3C320BF3659A43ED7BA43
+:10BE800066C6FBA0DE37F8F3A3FE69433563212BBA
+:10BE900063DBABFD946EAB6EA5B43E79F0767BB5FB
+:10BEA00076CF57DB58681463C16A99F2CF56BB2826
+:10BEB000BFAB5AA1F457D5F9F4BDBDDA43F927ABAE
+:10BEC0008B287DA2DA4BDFDBAAA7537E6B7529E5B1
+:10BED000B7549751BEB5DA47E9C3D50B28F5575784
+:10BEE00052BAA1BA8AEAB554AB94365537D0F7C0E6
+:10BEF000B860596941FF79D6CA00871428BFDA9320
+:10BF0000510AEB79FC6A56168C5A4FA07A1B6500D1
+:10BF1000DA44C6DCCCCF1C85F07B2B633B15C6EC2A
+:10BF20009D7ED50970BD74177CC37CC8AF3A209F35
+:10BF3000FF04CF6FD2C6A962CCCBB05D150BEC0469
+:10BF40007CD8143F9B0DE379B35576732C63376926
+:10BF5000E3E07784AF9AAB32C4EF098BB7544EC19C
+:10BF60007EF8F8313E9F00CB63692B588D05D28453
+:10BF70008A2E668771E21F0A796D900E6BE864BEA7
+:10BF800002C4AF586282799CF38B011374AD4C6587
+:10BF9000A208E337BB383D44AED3DDBB8D852640D8
+:10BFA000BDE42E3B8EBBAE6A663C8B020F3D1DDDB1
+:10BFB0002EF6D127FCBB2410C60FF06F9D7FF0F644
+:10BFC0006965C6F609DE88F605D01EE0102806FC75
+:10BFD00045A1B7F82263FB584F447BD7E0E3C7F491
+:10BFE000DEC8424903D3F3294B790DC25DCF8FECF4
+:10BFF000FD21D57FD729131E12AF5FED4238C3CF85
+:10C00000550867298B059A04CC7AD902C89BE1B7F9
+:10C010002699E76D90374990F7403D55F1B2B198B8
+:10C020007ABC2C0E532FE50F997D1BE589982FE5DF
+:10C03000DF651FD141E012E82203E58DD2E0CD8219
+:10C04000FC8FE1F7298CDD2C8F9EAE42FEBCD927F8
+:10C050005641FFCDD9626007E075A57B7C0CAEFB35
+:10C06000F196C1F9B416F974545FDEE4F43201FAC2
+:10C07000C9AC90C79BD8C0ED1EAA10A707A2F4BBFD
+:10C080005BA3DFFA8A99F2085C7507CA30C6AC4E2A
+:10C090001695DE60BDBB71BDE664BECE945B4B29D8
+:10C0A000CDDB35D9560AFC703E7670FC3546CCDFC8
+:10C0B0000E4306A3E1519B57DE1B2F91BC3C3F86EC
+:10C0C000D3D540FD366BF2AB3720B24EC4AF544AE5
+:10C0D000F235E5561FCB83F5AC4B17034E58CFBA5C
+:10C0E000AF6F69C8057E5237892407F4F9478E6B14
+:10C0F0002AE8124C50BEEEC042A6C0F8665729533B
+:10C100000B30AFCBEB20C3FE1DCE90175390980C95
+:10C11000D7EFA8F2A998B7B854E2E775E917EADBB8
+:10C12000102ECD7E91E4FBDA2C31C0044A9913E63F
+:10C13000736E35A37C4EFA838C24FD57309F49D013
+:10C140000FFE6E42783355C475E4325A471E3BCC1D
+:10C150004CD0CE3686799AA04A7C1E3B80EDD6A57F
+:10C160007F79C08AEBBB97794628D8D847F2080870
+:10C1700094A11C595B2953FDCCD6B1C417FABA7FE0
+:10C1800062F17D1ACE3716179767EBBE364595AF2D
+:10C190008735F9183300FEE21378F97973F05A9471
+:10C1A0009FCD90DF11859EEC5ABD47E5997FCA5718
+:10C1B000FAF8532F7FD7A910DFEAF9CC5E0BCD3BFD
+:10C1C000EFD69FC5E3BA06A287B51A9DF9E3B9FC7D
+:10C1D000CD9B7A8517E17E0EE68AFC1E597F51BC05
+:10C1E00042F3D0F392D328A72E7E7E12C9E3BC532C
+:10C1F000AB383F640F4EB7FA3CCF671BED04316F8D
+:10C20000818A7C5DAF007E15B417D63091EC02E6D2
+:10C21000615C45B138C83FB15A935FF95DF64B2078
+:10C220006F7BCBC410BFDBAA4A4415E09E932B055D
+:10C230004C00F7F82CBF97813DE2286002CE1FF03A
+:10C240003D322105E96012C1337B754810A1D31E30
+:10C25000947D29B4EC3AD7243E0EFE077C3F26019C
+:10C26000D6E9DD2570F9E0E2F2C10CD3B191FCAC66
+:10C27000624118CFF19689BE033F841E807C8C2CCE
+:10C280007A509EB678D6A4221F3A1218E9B505D77F
+:10C29000EE20B905F2D6B30556B4F46477EA32C895
+:10C2A000E7B9F87A74F8C414580CFA61C871A4801C
+:10C2B00017FB7508CCE3F70CA247BE6DBFB600B301
+:10C2C0007FA77E4191A4129F683FEDAA80E3E0BA68
+:10C2D000A15F2B7B99C639A78DC34C6F1C467E8905
+:10C2E000F981C44C51F865C0714CB70FAA37AA8EBA
+:10C2F0002DFC5347183DDF95109BDC3D1A7EB98C11
+:10C300005DF60D2A0E13103CCE03EC4E13AD9FAD1F
+:10C31000413CE7C8DCEE509CEAF00D50FEF86A0B99
+:10C32000C90FBDDFF3D50BFED401486C29E072BF05
+:10C33000E6436B09F6533F4E0C58A15D47CAB48CD7
+:10C340002EF8FEC4A62F73717EBA7D5AEB31F245EA
+:10C35000CE6A4E977ABE55E38B5A79707DB241EF23
+:10C36000AF65F07A0F6BF59E75786B918E81D20573
+:10C37000E4CFA2E3D36FC3F96E7FC0C64C51E4C2D1
+:10C38000B30E5F73C2C4FEF30C6F8FF43648FB5FCD
+:10C390000ED67ED2BBD3DF6583B77F342165E0F64E
+:10C3A000856F4EDF32C4FC1F8F3EBEBA1DDBE5B881
+:10C3B0002C0CF15B93BE96F0DBFC80C563057EEF31
+:10C3C0001833CD8578AB4BE0788BD2EFB383CD0BB0
+:10C3D000E05236C4BA5E18AABD30F8BA5E1D02AE8D
+:10C3E000478780CBA1C1DA035C5B8798FF1FA3CF8F
+:10C3F0005FCDC179E7645948CFD464035C518E2383
+:10C400005C597F7E88D2EF3B43C065287AFDF07B84
+:10C41000D2EBC9C1C6BF087AFDDBF7A4D7FF3B103A
+:10C42000BDE2BCBF07BD4A89DF8F5E9D8983C375AE
+:10C43000287A4D1EACFD45D06BD660F3BF087ACD8F
+:10C440008B36BE9539BC2ADA45055C9F2F281649E4
+:10C45000BF9BF3B91E761C7BCA8BEBAA037D955458
+:10C46000847AFBF8C34B0BFBF474A41E8AEC2F52A6
+:10C470008F2EFDDB93A4479D9ADED7E7635722FBFF
+:10C48000F99741EDBB6F3B6E8C8B85EC63FBDAA7B4
+:10C49000FBFEBBC733EAF9180F1F9FC1F85716A15F
+:10C4A0007EDDE541BA8C2FFABEE30E5E3FADECFBBC
+:10C4B000D9050B12C12E70F4D9059955BFDEFE5176
+:10C4C000525F3F999297C9403712BB8AEC3756C1E9
+:10C4D0003C3BB1B86ACFF68F26F4D903007F01FD4B
+:10C4E00023FA38A68AE0F68FC2E6D53B9769FBB4FB
+:10C4F0004ADA17E5C95362908ED7B50C6E2FBFA1EB
+:10C50000E9F1DF6B7EAAC39A9FEA10FAA920ED40F9
+:10C510003F15A407D14F05E521F45341FE55CD4FFA
+:10C52000F58AE6A7FA8DE6A77A58F393F9D14F4634
+:10C53000FEA880E68F6AD7FC51414A1BAAF753BA7E
+:10C54000B63A44F5DADB5E188EF0E85B07B7DBF34A
+:10C5500064DDBFC7D7C158298B86AF1B3C26C3FEFD
+:10C56000E2FA7C87016FD72A4986FC35AE4C43FD41
+:10C57000ABE5E186F22B6DA30DE5C56C8221FFA32F
+:10C58000DE2986FA57F49418F2977F7A9DA1FEE48B
+:10C59000AE9986FC65476F33D49FD8596E289F703B
+:10C5A0007891A17C5C68B921FF83FDF719EA8F09B6
+:10C5B000AE31948F6E6F3294A7953D18E167DA62C1
+:10C5C000A81F5FB423C28FF42B43B923FF7943FE26
+:10C5D00026D0F728FFECCA6F0CEDACAE8386FCBF0B
+:10C5E000C531DAFFD89D41AF378A3DF9553CDFAF01
+:10C5F00082DD5E4CF632C8B1A671D8BAD28FFBF19B
+:10C600004CF81DED63C0AEC08643EA31CA1D5385A8
+:10C61000C538FE10FC8C1E00ACEF861FE4C7AFF4DB
+:10C62000FD6CBB5DFD218E9FC7E5B02AABE47F8822
+:10C630006CAFFB8BF2DA67C563799D5C2247930789
+:10C64000272CBE93E1FA2172FF9BE78D655E1CAF3C
+:10C6500042F797717967E25558E6B16B0E0BE8FF28
+:10C660002A7B3501D7A3FB79D6697C5AAFF991AD06
+:10C67000EC72F2639CD3E43F334DF50C269F22E12C
+:10C68000F56DE5999814B9CF9911FA18C7AF9002D2
+:10C69000D1F4A49EEA722CEFAD3B07C58F0E5F1D4F
+:10C6A0008F2639E845BD6A532A59B9B33F9C4C5986
+:10C6B000400F71FFFC75E72619E5F839F64AB177A6
+:10C6C000D845ACB7EC0E5A878ECFC87AFA7EAB0548
+:10C6D000F14AF291CBDF5A0DBF6291770DC2370E4E
+:10C6E000F6D1B8FF133D21D6F51DFCC08EFC4443A6
+:10C6F0005E726618EA9B3D952C88FE5B1887113D9B
+:10C70000FA18FA73F11FFA4B4C3287F3C07C773971
+:10C71000F909CE45D82103F11F0EF1CDF0A1F9F5AD
+:10C72000BBF277C7DC54EAFFBE78A6F95F549EAA35
+:10C73000EC4DA49FF2228D8098F2D3F760DE0B0FB0
+:10C740009B49CEFCE8ABED871E03BE341559E526A8
+:10C75000F20CF90FFD16CAE77A6DA5985F786C8C1C
+:10C76000C50DE5473280085C585E1A8772E03413C5
+:10C77000A7A3DFEE347B336E42989CBB27C942F2FD
+:10C780008535988F77D9707895CEB1EEF2F3BCBE2F
+:10C79000AEF9ADC6FC3C3633558271E63D646601A8
+:10C7A00000D642261DEFD2E10074302789FBDFE777
+:10C7B000B3CAB5328C5B6FE6E7364B5E1C63413C17
+:10C7C0002C9C20E79AC6F5CDE3FE2491EA7F06F47F
+:10C7D000A658FBBE2F72062C28974FEC9DF093CBEA
+:10C7E00019F613589B81FECE04B04394FEF09DD3FE
+:10C7F000609CE750EB889C37BA41069B87D42E7823
+:10C80000A3F9D51B9304031E6B6DBFD8DE05F3F4AB
+:10C81000D64ACCFE43C84BFC5C493D161BD889F276
+:10C82000BBA4F2A92E8083BAC62AD742BAD9F18B0B
+:10C83000E7B07E15200CFDB9CF2729348FF376772A
+:10C8400000CF1940DF5C3633F6FBF7FBE23FA9DF90
+:10C8500057B0DF94FEFD2EB17559D09FB84CAA9CFD
+:10C860002E88E857E4F5AC669F3713FD89FBC78532
+:10C87000321543BD868BAC7758187651F5A68B835D
+:10C88000F47746936FBFDBF5B805E5D6E95F7D78B1
+:10C8900023EE8716BF6C6236A87766572C0B91BDC6
+:10C8A00017B0A0DDBA68AFC91BA07C68D22DB1E17A
+:10C8B0007C5D4BFD2F7E2E96F6538B9EB706664011
+:10C8C000FB452F9C18CB401E9C59D3732813E1F7CE
+:10C8D0002B81EC67A6768DBD05BE2F92D89DD1CE5B
+:10C8E0003DFF9AC4ED8E532F39CA90DE84F603774C
+:10C8F00050BFC19F9AAD617AEC489299F009F5C892
+:10C90000DFAD3E2D0446087C7E378F099F5F0DAF5B
+:10C91000F734F7E72EDA6F0ED8717EED6D161FD45F
+:10C920005BD6FE37A2EF2B9FDB1D877058B6DF6802
+:10C93000AF2E7EEEEBB55300CF8B4DAC6706E9F121
+:10C94000AF287FCE6BEB31911CF2C60920B79692CF
+:10C95000C8827ABFFE64DA7B50FE99CBC4EC200A11
+:10C960003EEBFCD8F232E67DCE4AF4682FDB6FE472
+:10C97000C365ED272C382F59643D59C0E83FFC2290
+:10C980008C2F59FFFAB00FB6A09C5D166CFC9B096A
+:10C99000E86DD9DED3EF22DD2D8BE0E7CFF097F401
+:10C9A000FEFAD29A1CA92FDF9884FE72D60E9B9FA6
+:10C9B000C903EB4B9DBF17EF3EB74D85F14F3DFFD0
+:10C9C000F93615505EF15F7FDF763FEE8F5EB5CBB7
+:10C9D000289796FDEA3FE25818FC872573F970E620
+:10C9E000E9A79EDC027038F38E95A076E6B79FB873
+:10C9F0001580FB993DFF3715CF9D56FCF6EA34A410
+:10CA0000B315FBAE4C1B6C5F84741BB086E33740E0
+:10CA1000F855F6C33869907D454B23F0726ACF799B
+:10CA20000B9E0B7D29B01E94BF4B835F5BD03E3BBA
+:10CA3000E4653D08A7D7F69E38741FE44F039EAC0B
+:10CA400051F004EBCF1449AF843251BF2CDD7BCBC6
+:10CA50004D5714626AF6288827D643F2BE1F7EDF40
+:10CA600002FC16F6E137B2FC1CFBCA82F05FB60B83
+:10CA7000F03916F10AF81CDB1F9FA7F197C9FDF1E9
+:10CA8000599C6CB4FBCEB18AED5BB0706F12E17F44
+:10CA9000207C2ED9F7E341ED2C5D3E0C05E7050225
+:10CAA0009F576CB2F7E664E4DBE71DAA8BE33930ED
+:10CAB00003CACEEC3EE76640279F9A7BEE4038F4EF
+:10CAC000FCD62AEF80EF8B7EFB36F1DD997D7FB6B9
+:10CAD00020FEE1274E98047976E1E74D06F9A5DCC2
+:10CAE00006674B58CFB4770B31653DAA87F047F9FD
+:10CAF00043C087848FC0CDD31594BF81145AF7D219
+:10CB000000E78FA58103B70A63FBC3BD3959D4F58C
+:10CB1000D605BC0A4588CF0FA721FD0D844F7DFDAA
+:10CB200032AEFF32287FC2C8BF91F59702BFE2FE46
+:10CB3000A81F7E0307FE88E99936AB24802D740672
+:10CB4000ED04677FBCF7C19FEBE76F6B1FD747F022
+:10CB5000BBDE5E87D350FC3ED4FABE2DFCEE4956B8
+:10CB60000C74A4C3F1D457D1F5411BCA8F8908C7EF
+:10CB7000CAE919C3FBEB33132B553385BEF9AE0D50
+:10CB80009A48CE9F6A07BB5CE82F2F96E2396E94D5
+:10CB9000719ED3E4D4D2FD07C6A25C3B75F0258D0F
+:10CBA0002E39DD2FDDF5A145D5F443205C3E0F7015
+:10CBB0002EFC9236EF65AF44EF6FD9AEBF45EDEF77
+:10CBC00033C9FB539CFF679D66A642179F054D51D5
+:10CBD000E3191E4FE6FAEFC2BA63271D8DC77D41E8
+:10CBE0005C8C82EBAE5DE37D1BCF45D537CD74FE0B
+:10CBF000CF24CFA75628AF8D8D51D08F571B378F9D
+:10CC000029617ABC2E024E92AB94CEEFA4E4D242BC
+:10CC1000BEA70B18CE7FCD4010E1F306BD9B857AF1
+:10CC2000E983719F98719D7F8DB023FF2AB1B5690B
+:10CC3000D0DF5F55C153A344DB1F18FBF7AD36317E
+:10CC400025ACFFA5D69E0F703EEC5FED0CED32D308
+:10CC5000AB7601E5C9B26D66DA7F2D836D15C2ED45
+:10CC600093C7EC0115F29B7F5D7D07EAA5FFDC66AB
+:10CC700065781EF1DABE95DDAB502E3D2A30F4A367
+:10CC8000FFE74BD55FA25E5EB8155607F264BEA300
+:10CC9000E7496C3FFFB94C560BED3F178293703359
+:10CCA000DB9D129A84FB90EEDDE91E95FA797129DD
+:10CCB000F67BE63907F57BE65FDFA671CEFC6B2CD1
+:10CCC000E9357DFE606F2BE17A1CEC6DE5021F906B
+:10CCD000BD1D96877116639ED717BED1641ECABF4D
+:10CCE000C59802DD2FDE1FEF45FF4A583DEA6799E0
+:10CCF000B5E7E71EDA7FAB1922ED9D4219C88F8B8D
+:10CD0000DB8DE37FA3C9BB65969E79BCBE3F83F3F1
+:10CD10006D27B573A668F4AA9547B6D7EBC7A40CE0
+:10CD20008BE887B75F6A6595D1F8204DEB7771FB8B
+:10CD3000D7A38CFD71BAED3F0EFF7EAFC0E340D8A4
+:10CD40001E3BC5A35558422313816F5FB0B005C881
+:10CD5000BF1571A1910930DECB9ADCAC88813C7C97
+:10CD6000CFD0E681F531CF6C5D6710AF4B5EB4D3A9
+:10CD700079CA9217DEFE12F1790A610C183B95D23E
+:10CD8000F9E5FD4007A71E333115ECB525D690FB1C
+:10CD900051D4537BAC6C07F2F7ABAF93DE3AFDBCDA
+:10CDA000551CEC9C7A4910A8C1D67F1D6A09CBAFEF
+:10CDB00074621C8E576CC37DC36153A006C6AE92CD
+:10CDC000BC6B9EC3F51D36D33EE3EC5C968FFBCA6D
+:10CDD000B32CC3A312FE95B725285FF97BB3102DA2
+:10CDE0003EC9DC0B427D02F041EFF54C8154EA1D57
+:10CDF0004EE94A4BE52894BB26191657407E02B2ED
+:10CE0000DBCDC91E361FD29589CC87F063CEEB2EC1
+:10CE1000F0D79F00A5CB1F51D2B0DD8F52CC34EF9D
+:10CE200045A9DEEB53483F3A65B22F343A55F7F146
+:10CE3000799E17623C35189FD37BDF9D08DFE51F85
+:10CE40000A4A783C43643C6895A4BCAD14D27A4944
+:10CE50001EE5C9310CE17A563B773F3B57894F08B5
+:10CE600093CBCDD532C98FC66A17A5EBAAF39942E9
+:10CE7000FE350FE54DDAFAAD052AC507214FE38FE0
+:10CE8000D559EA453B0FE784714126A78FE8C8EAE8
+:10CE9000AA24DF94CDC9681F6B72AA6C3EA46627D2
+:10CEA000878FC9594AF0B16879A97506C113DAD3D9
+:10CEB000F7AB537D77233C6C59971AE4922579BCE4
+:10CEC00021DF0F5E3AFE77FF4FC18D119C1AAB6DCB
+:10CED00094AEAB2E2278D5577B29FFBF00B7D694EE
+:10CEE0008908B7294CB185C3ADC4901F106E8F005F
+:10CEF000DF2487F30DC011F986C5787646597F6423
+:10CF00008AF11028A81FAC6EA554FF9E3880DE3E23
+:10CF10009F2268F1B0BE1A338E23737F0B4B565994
+:10CF2000D6A43EFF2673A94CC13CF22AE2E5680C68
+:10CF3000C16EF9FB76F21B9B64A93B5CAE2DBF4131
+:10CF40004943F965AA7A9C9D088B4733CD28B52BB8
+:10CF500004570F9D53D66A7AB3FE02FE8C7CD05CD8
+:10CF6000AD50BA5EE3878D1A3F6C423C631C8987E3
+:10CF70009F6BB64C67A417FF0FE4F93E3EC4C2E3B3
+:10CF800046123CC19019F04D3252A13444F1BF47D2
+:10CF9000AD8111B9143FE545FA4838BA8AFCC78C0F
+:10CFA000055DE84F4BD0E0C65E1996302B9696672C
+:10CFB000E67A879978EA37A33D1E09D75ACF411BF5
+:10CFC000EEAF079A4FF1070B051CEFFC2C42134BF9
+:10CFD000BE3D78B41CCF4F5B1CA457533D9539E838
+:10CFE000DF63C7AC449F4E8F4F981F86BFD401ECC0
+:10CFF000BA55A9D77E8C7CDB8DB20CE8F0C1D6E1A6
+:10D00000768473B339E84279D79CC0F587520650CD
+:10D01000B8ACAFDD9F3439185768E4775DBECA53AA
+:10D02000C71BE85797AB895719E95C97AB2FA570D9
+:10D030007B6D516AE9799C4F52EF56E2C348BACFF3
+:10D0400093A794F992510F304F13DA6B6833A21DF6
+:10D05000F7A110E0F4CEFD5367BB7277A09D03BB30
+:10D0600002922B2AF203E1A9E7B56F9231DE95CB4C
+:10D070008735B699365C6F03D0111B85FE6C850031
+:10D08000BC01E887D179A047E38F224A75FA74A7DB
+:10D09000E61AE2044D798744C4573DD811144F0C69
+:10D0A000FB3B278C271D986C437B4F327B0EA39C48
+:10D0B000EA891583A837EB9D336D5EF4DF241412E3
+:10D0C000DEBF8C2DCF192C6E09EC16F2DBCA4E0F89
+:10D0D0003B8EE330467E5B933C9EE13E71B7B333BB
+:10D0E00006F72DB1A9A2615E8B527DC353C3F263D3
+:10D0F00070740D5FD8ED6EAD9FC8F17E90AAF92DCA
+:10D10000B354E60D3BB7A8D2E95B51D95561FCBDDC
+:10D1100066C434867117917C3DA0DCDAF9FDE456D3
+:10D120006D4E80F0658E9417C920C79D94AAA28C7D
+:10D13000F3569AFF2581E8EA4A840373EEB86087C4
+:10D14000FC685814FA3A7A691AC56B5ED033B06B32
+:10D150002E203DB3B988DB239A9EE1FAE96C8B83DC
+:10D16000F4D3D9B995144775B6254D41BA3BB0E112
+:10D17000F2B1088F79BD8D4C81F9CDEF9D4CE982DC
+:10D18000D65F525ADEDA0644CE58CDFAF91B664114
+:10D19000BB138F98282EA83B30E14C15E4BB5BAC49
+:10D1A0000CE38EBBB7DE93837EF16E1807EDABEE1A
+:10D1B000AD2388BEBA016E946F30D6C7786113E094
+:10D1C000A59C313D68D38BF5E7BD6E6A8B662795CC
+:10D1D0006FB47AA39DEF5C286F8D6EB7D5E2AFE98F
+:10D1E000F85FE5288457F107AB7270BD3AFFAF4C8A
+:10D1F000047984F0FAC0CAA2F9E3AF4EBDBA227531
+:10D2000022A6DE159832676254FF5A1FFDF3714F54
+:10D210008860DF125E7C71371BFCACDC8F7942B317
+:10D220007F996D80F238ADBD1CBD7C49CBE7871E70
+:10D2300060787FA1B214895EDF4F9B18ECA705DCF4
+:10D24000FFDE4CF1D0FA7CC04E253A66800F942F59
+:10D2500073357F0FC0FD260B7C3FF1BA4940FAE8D9
+:10D26000A3275F1CDA2D42F30D6B7643F9DF0FF332
+:10D27000FDD9C2DE4D24EF84E6319B27C3F77B5EE8
+:10D2800037939CAF69BA7CE3ED80DF2FDE30517EAF
+:10D2900041AF9DEA9D7CC0B3F976A8D7F30733D997
+:10D2A000E15F1CBE9AE21E4F9A8D7E82A9699C8F17
+:10D2B0005FD2F8795E6F33D91F7AF9BC863916854B
+:10D2C000E874037D9F878736785F8195FD7B711EAB
+:10D2D0009EE730BAAFF0D2C3B75EBF86F4DA78B259
+:10D2E000F7E7AFB77AA2C54FBF94AA18E4CFFCAE58
+:10D2F00016EA97815D949CAAF5172647E6F7261152
+:10D300001F30596518673C4F932717E6B7D56C90C7
+:10D310002727EDD1FD20AFA7F27DD4BCDECB89BF9E
+:10D32000FAAFEF87F47D9E3E6E17E7C7BEF56C9EA1
+:10D330001C6D3D7DEB984AF54F26441FBF471BBF30
+:10D34000BB7A01F3825C2AB7423D278E7FCFDAA2F7
+:10D35000425C4742A210B6AEF9AD8B99376C5DF3D3
+:10D36000B7CEB69487F5DB8787E5FF5E2CF5E1A1A4
+:10D37000277509E161556AE931E49BF2E62BC62283
+:10D380003DCE6F6D24389F307BDC285F3F69BD2721
+:10D39000CE17759E8AC18F30BF55C30FD8BB85612C
+:10D3A000F8D1F112D9BEFBFDF95F3E80F2E7116EB4
+:10D3B000DC0C04AF7E78CB8D0EB7188D3EBB41DF01
+:10D3C000FA086ECA0B4791AED73B3C48D703C36FF0
+:10D3D00034F30D06BF01EC57B0774C69785F017DDF
+:10D3E000B4780ED9CAE96028B8F58DABD14171F493
+:10D3F000F514A5E97450C55460D8E396A1E8E07E21
+:10D40000A6DA0659C7053A78D84007459BD7131DB9
+:10D410007C8AF6CAA8FEF83F6E51E3A6E0B94F93A6
+:10D4200089CE958EC7A8A9B7F1FC3894C7C7E3FC8D
+:10D4300037E2398D9E5FB87344DCECB0713F690010
+:10D440003844815F51DA00F493A7B28249FF3CFA75
+:10D4500039618E7EBFEFEAD4E2A969A83FFCD1FD15
+:10D46000B57AAACB6B53BCF3C23E13F5E771E7B0B4
+:10D470002F0350DA9CEA9B8E745197F0F33B511EB8
+:10D480001C3F2E90BEAD797FE528D46B917602ECDF
+:10D490003F1BF0DC73A529D64F76A854B99DCE4129
+:10D4A0005589ED2CC47D4AE5968F46A0DFB08A529F
+:10D4B000A6D9A12B4D977A9AC82F5BF9149E930297
+:10D4C00091C8585F6295746E0A82B014F39B1DFC7C
+:10D4D000DCB54AB2C9D6B0B884E51ABFD45797FEB6
+:10D4E000F223F443DB5426A7627B2E3725C6EDAF2B
+:10D4F0007FE03CC3F4BDC5EC933DB80F155829F24D
+:10D500008559F2D1FD27B32B799C1A8687CA347EC0
+:10D51000DE6EEFE868C885F6F6BBFE20A31EB4C237
+:10D5200038E867B3654967C3FDD5E6E420DD6F627F
+:10D530007961DFC1AE721640DEE00780F90E621736
+:10D54000BE2C785C5F223DD67078142188207D67E0
+:10D55000EEF03694CB45529D09E38E66DD3582F2BE
+:10D560009BE77C33B22B0A3DCC7A655D27DA33B377
+:10D570005E499F83E707B39C233FC614B60BB618DA
+:10D5800068FF9AC0824D905E657B9CE2195FD3FC78
+:10D59000631D980FD38B1D1ABD819D337D0FA4B3DE
+:10D5A0006C7EF3DD057DFEB4C871376B7CDF610EE8
+:10D5B000A65C8A7400E3E03A7EF64AE0C7A0FAD996
+:10D5C000EDC1C00D63003F77B01E33C2D1C7643ACE
+:10D5D000F7D0FDBAE5CCA3E519ED4FDFAB30EF4056
+:10D5E0003A89ECEFF610EFEF671DD01FA4771CEE21
+:10D5F000F93754CBBEA03CCDC1C2FADBEF39E460B1
+:10D60000FDFB8B84B347B299D430B8028AC470B89A
+:10D61000F7836F7CD9756CECC07CD6076F3E8F4862
+:10D620007C7C8145C0A76D69DE5F23BFA969DEBD33
+:10D63000C8BF15B61EB70474732CD9B71FBF2F35DA
+:10D64000F97252011EA7B37DA352102E9DD1CF5F58
+:10D6500023F93BAFECF463C83777D4480CF1BC76C0
+:10D66000DF278F215F9E36031FC17EE0B5559FC423
+:10D6700022DD2C01060C97271F548D20FBE9ECDEE0
+:10D680005183DE1FF940F397746A7CA2AFF34E64B6
+:10D690004018EFCEBD0EDACFDC5965BAB0CF427A72
+:10D6A000BFB38AC78730A973ECAD06BBB36EC07E2B
+:10D6B000701F11D94F77B56F3BF1BDE49B8476F7AE
+:10D6C00089EA05DB51BE44CE73A4CB77228DF4DB0F
+:10D6D0006C43BCEDDC9685DBC3F950AF5F3B807CCF
+:10D6E000F58CD2CE016D7C3CA6FCA0D83989EE6BBE
+:10D6F000D28F3D64FB5008A387A1C6637957792F69
+:10D70000C805DC7FF944E64CEDDF5F643DBD7F5723
+:10D71000D595ECC4045C9FF7FFA5A50C3D7F8B8BD2
+:10D72000CFDFAEB5D3BFDB7D7E8676A1FDAB78B211
+:10D73000133CA3B8FFE11F9A5DC09CB05E6430FF4C
+:10D7400066EFFFC67A61608A17B66FB5468D2BCA41
+:10D7500074491C2FC143C5B628F3EBD75F48621745
+:10D7600053CF338AAF1FDD64E4EF1A1943FB9AF2FB
+:10D77000AA5ADA673782FC407D10399FE34D8F2A21
+:10D78000A807EC16BF827ED1C691A9B96BA01D482F
+:10D7900035F2FBD863FC8A14FE5DF307D9D7F81580
+:10D7A000DCDF368EC8A0EF7A7F8D0297B33A5F3404
+:10D7B000C2BEEF79F28B795C3331AEF4ADC0F45870
+:10D7C00068B7632D0B99DC8C1D74678CC67DAEBF6A
+:10D7D000DE42E77B8DF962FA5CC8C765DBC83FD6DD
+:10D7E00096109A85F76B554122FDEA4F50AE8D4554
+:10D7F000FFEE9AB44E947F07EFB6D07A9B27F3FBE7
+:10D800006AD6291FF9AFC4FE57300FEAD51DBDBF38
+:10D810006EC57702D4A3B09F45BF21760AF268C7D0
+:10D82000F4B376DCCFB930AE0EF0B1D51CA4796D6F
+:10D83000A9B152BF5BDA2C65D1F0F779BA44EB0A93
+:10D84000085D141F9CC4827684EB83D3676ECE83FD
+:10D8500076B9794CC6FD7C73C1596DBFE935F1F3DA
+:10D8600028DD8FC8ECDA79964D3BA7B285C7173E05
+:10D87000EADF4BFE43C78C204FA78BE47F8E9CC70B
+:10D880000A17A77BC7D4CEE9A8271C852213D0BFCF
+:10D8900099C7045C973C7D075DD2C8CD6703B43758
+:10D8A000517BD90BED0B797BF409C917D9BEC2C5E1
+:10D8B000E30CD7A31F0ACA03668F702DCC23708395
+:10D8C0002CA84A5FBD7A17D7AFDBA1FF10C9D100E2
+:10D8D000ADCB9D1F0C21BDB92B44C2D3FAA2E3747A
+:10D8E0002EF060A1EE47F5D03CB6D61C3980F6D7B5
+:10D8F000D67B19D9495B518642BBAD37B0003F4F4B
+:10D90000621928DFB62CB45C4FE7F905007F81D29D
+:10D91000A8F39E9D6E237CBB573F18C2FBFB311EB4
+:10D9200020D45C4AA3D66F4CE770DA620EA4A37FC2
+:10D930006420BA287371BFAABB4AB3AB98DF85785D
+:10D94000DDA0C187DD3A9EFB1724AF121EC7D5A705
+:10D950004FB81F03D64771AD497516D247E28CD038
+:10D960002C5C5762BE855D938BFCC5E1A68E117958
+:10D97000DC190BB4227FB65D924AF1A4EBC4800B94
+:10D98000FDCD6A8985CE930F1689B3F05D848D75C0
+:10D9900016F243409EF8C5EF1DD686FCE6985A5213
+:10D9A000B6A010DFB9B0C808DFDA02D98E745CEB1C
+:10D9B000156501F21B4AF5FB118CDE37186732D969
+:10D9C000F3A17C7BBA883E5AB65D1088DFEBBD259B
+:10D9D000FEE1F0BD5E4E16C2FD002FBBB8DD7B77C9
+:10D9E0004EE9CB2E4803DE07FDC3158E4B6912E3CB
+:10D9F000572CE02796851660CC4D5BFD934771BD93
+:10DA0000EBC7D9E8FE6CF60A7F19CE37F6128B8287
+:10DA100078DDD19B349AD6576751909F3709816B37
+:10DA200091EFB7DE7D4845BFBAFD6327C60E336769
+:10DA3000D7DFAA317ECC59688938C76222CA717D86
+:10DA40005CE75B21A2A72EC1F79758F2FF1434E5DB
+:10DA500027533CF32484E78629EFE6CF8B4217D087
+:10DA6000DE993A1EED653134692CCA29AEC7982477
+:10DA7000A787E3775376C63BE867DA560CF3C7F11E
+:10DA8000AABA6FA779798FDC8F7695F3D8C9AFA33F
+:10DA9000CFF34DD223B1C71C21712CA64B66907DCC
+:10DAA000165E0FE4FEC61CEFC72EA09BDD355CEEB4
+:10DAB000B7DCC5E83D0AFCC90F836F4B014869FE1E
+:10DAC000048D42F50A64F2A3AF13956008E139D6DC
+:10DAD00046F494C67C24D722D7EB38D67837C61DB7
+:10DAE000393CC679F66AFC8D3F522A9D57A025CA5B
+:10DAF0002CE973ED28FFF68C57D271BFFD6042749C
+:10DB00003DFF5E3A6FBF5B886E9F9F4BB7737D0989
+:10DB1000B232348950C528AE0FF2622A9DDB909351
+:10DB2000DB2A72B9C0AE63A4F7E2C675D93D61E3E2
+:10DB3000ED49EF9B27C61FC46BED98DC13AA81F556
+:10DB4000B701D5E27DEEB86C0E47A7DA0747AC2FD8
+:10DB50006BEB023EA81955884094A93E2BB5D0B96D
+:10DB6000084843F51BB10F0EB15AFD2D459280EFC9
+:10DB7000900C036008503F61BAC5708E22D71D51CA
+:10DB8000B1FC7E1353128BFAC67F6C1C0BAC81F177
+:10DB9000E3BD4678C7AE786125DAE591748033B885
+:10DBA000D02F868ACF35B64BBDBD1F1F103C699E56
+:10DBB000009A96B7D80E0B00A5A55DD2E36349FE87
+:10DBC0004E3475AAE80FC580A47D30FF4B9F7ECBF5
+:10DBD000BB0BF22D3ECE67B1F92FAC44BA4CC8E076
+:10DBE000787A077DCB00E74799FC778CDB51AB4413
+:10DBF00005F1B12D348CF47823934A114F8D95475C
+:10DC00004494EBCD7B99471090FEFFCB1A3EBFDBCF
+:10DC1000D2F9390D9314927F929BDF1B6D2E101D4C
+:10DC2000285F0FDEFD02E9BDC70E880CF9BFE4775F
+:10DC3000C71EC1F7815ADEB152BEE5F54A921B3FBD
+:10DC400087766A14FFF9507A39B27EDE921D029E01
+:10DC50004FE42C08BE3E12E5B35FF25C83F858D067
+:10DC600049EF872885FC9CCD392344EF8728A8D528
+:10DC7000C02655FC5ADAC2CBD9AD89B48F1A63EDF0
+:10DC80006AB80EE6F7E8D312437D69B206D3E743DC
+:10DC9000BFA6179DA809FAED8F1E9D114A47391E90
+:10DCA000534961D0FDE677229DCB59F70CE5F72368
+:10DCB000A1DF84A91C96767FDA0194976833E3BDCF
+:10DCC0000A87CAF5DC0629E0C538EF0D2B7C161C47
+:10DCD0009F69FB97C625E54F229C4F6A7A8F552E88
+:10DCE000A0774CDC1ABF38AA5871B47D56AB2B868E
+:10DCF000C7B73C201E40FE707B19E90FB92A181ADD
+:10DD0000A5E9659CB8BCFAF946D42FCE0A91D6B1E4
+:10DD100041EAACC1772536AC60728DD2BFBFEFDA75
+:10DD2000BE2ADD4AF36F451CA7F4AD835C7220DF89
+:10DD3000DC0BA2AFE3611C7762DF3A62F475E47733
+:10DD4000515E9FC7766FF0A2E6B1595BC7A6749982
+:10DD5000524701681A677F79BFC6F101BD2B1300D6
+:10DD60005BDD44F7D182D7615E794E64FCBE96914B
+:10DD7000BFFBE535BA8AFCAEB0B0717291EE389E49
+:10DD800081EE34FB09F8CE86224054BE213F869FA7
+:10DD9000D61F498FFF74B9183E6FE83FB68109144A
+:10DDA0001757C19492F4FE72916972D1C6D410CA09
+:10DDB000BFFF69B9087290E4620BAC3409762AB1EE
+:10DDC0001D4D77A31ED7E5E144C4C914645FDB0D84
+:10DDD000254EDA1751FEB247FED082F191EB44EDA9
+:10DDE000BC4B830BBAA1102E5FBB14833E7D187F02
+:10DDF0008175ECE948BCBE00C6DB5C366C1CEE2FBE
+:10DE0000ECFE17C93E7017F0F81577153F3F77E421
+:10DE1000CD7B32FC5E5C653AB7D32B75FAABF2BBB7
+:10DE2000709C0DD82FCAE73C0BE9CB475990EB43C8
+:10DE3000CD3EDDE6D2FC241A5D45F249A47C9AF081
+:10DE400087E41294EFE98255C6FD1CEAE783A946F0
+:10DE50007D8DF4A2EBEBD6CE3509E80FCBD5FCFDDA
+:10DE6000B936639CC365195C9E99D3F93CD68995F4
+:10DE7000B4DF544B44DAC7E9F477418F47C031121D
+:10DE80007E48A86B27517C0CE5E38A7B18F2EF36BD
+:10DE900020597CE32D2E5DD1E2A6658273DBCFC4D1
+:10DEA000F1282FF77494DBD1BF2EB86DD7E2FE7046
+:10DEB000A3C04228373716BF4971254D55D0332CA2
+:10DEC000CA992FCEB68CED8F67E063DAAF3A546B08
+:10DED00027FAB582A11D14B7D01438348B713B9644
+:10DEE000615C4A53FE9A8C4528DFF34B0B11BF6DE2
+:10DEF000F5168A9B91F359543FC2E7B88F213AF93E
+:10DF0000767ACCA1EF2F2BA2EF2B4B33F8FE3628DD
+:10DF100081A882F964E58B1EE4FFAC3A4BD4795CAE
+:10DF2000A9E1293383DF0F6BAB3F944EEF668995F0
+:10DF3000013618BE60FA6B52C3F03179007CB874B8
+:10DF40007C483A3E1266131F76758A5CDE925EDB71
+:10DF5000C0E4DB503FAA9516B2631BCD7C5FBEA325
+:10DF600040E30BD9D686C4F66DE93A6E8948F7705E
+:10DF7000B28B44DA273A2A9EA7B8A64759CFEB2896
+:10DF8000EFD4027E7F3EB2FD1D19DC7F159414C1D3
+:10DF900043FB698E47C02BCD67EB88D4B6703E6DCE
+:10DFA000D5ECE8561787E3D6FA87894F2F769EBAC5
+:10DFB000DCAED5ECE8855E9F05D5812A944E4B47B3
+:10DFC000FDF9047F878A999C64977F8A4DC2FCB2D1
+:10DFD000ABB27C951961E743B2B752C47A57E3BB41
+:10DFE00042D0FE9320BF0FFA49F0D7C5F40E978FA9
+:10DFF00011332F649D023139C8D09D907749412A51
+:10E00000772D80B924D0ED48CADB6CA0176142A7F8
+:10E01000ABF9FD8B6E7C5F92DE9FE4EF4B7EAEBD75
+:10E020002739A6755DC9A3389E22F950667C86EF14
+:10E030004BE2FDE7A277292EFA14C8DAA6048C87F2
+:10E04000E1F7B7E5FB982C4EC6FCFA128C7BBEE7D5
+:10E0500055AB764FB2730DDE7B795C8475439B665E
+:10E0600009F4FD702C6A102AC3E878F7159D7178C1
+:10E07000CE773A78CBA0FE63BC3F48F3CDE078DAA8
+:10E08000E4584AF7CBE639436E6C7F60CF534F6E4E
+:10E0900081F13EDF67A3F74C363B96BAB1FCF347FC
+:10E0A000DE76A3BE38BDEF6D4BB4F3C92552701AAE
+:10E0B000DE23AB50E3D91A987F7170B685E24F76B4
+:10E0C0001DA0FB694B649F05FBAF68DD43F9AB7690
+:10E0D000FDD98DE5EF67703D713ADDE746BF445EDF
+:10E0E000AB352482FED93DCCBF28EA397B86A8CD4A
+:10E0F000FB55EA7FB3E3D5438897D38F58C9EF76B2
+:10E10000E091DF51BFA7F6BD48F3FD7CF7DB77A0B8
+:10E110003D5DC19807E5F969BBE6D7B375C685EFE4
+:10E120006F5FD5E0A1E74FC76AFBE0AC21EA69E782
+:10E1300031CC09F0A7FB039D7178BFF073B3CF8298
+:10E14000F0588CF080B418E080727F7150A0792E66
+:10E150006E6DA3FB568BF772FFE0628017C1A5F5C9
+:10E1600000CDFF5806971BA7F6FDC54DEF52ECB545
+:10E17000D2FE595FF762A7CF8DF0D1D70B70E0EBDD
+:10E18000DE7D71789AA7E3A9F5CF34AF8ABD7C5EB6
+:10E1900015BBF83CE6ED053C39114FB309FFA7F676
+:10E1A0003105EFC174EF79FB33B4674EEFB32968E3
+:10E1B00057E8F3CA02711B371EF988EB63B6572084
+:10E1C0007DCCA44E3ACF5922CB32BE4F70A13C60D9
+:10E1D000097079DA599209E5CF3C24D2FB964C0EAE
+:10E1E0005E8AFED53319FAF946A71BFD62BBAFF074
+:10E1F000137D9E8CD5E02D75BA317E6673A6EF4CEB
+:10E2000038BF9FFEF0C54B71DD2B4D95BFCBC6715E
+:10E210009EE2F1A1E78755FEF5019AF770C3796395
+:10E22000640A708BC3F3EF7C91F9E85EF2DED7628B
+:10E23000C2CFA14D99DCEFB6D9F101DD473C8DEF9E
+:10E240003CD27C8214A735D25BEEC673BE93CCE978
+:10E25000C373D9CF9F788DE26DBAD375FF5327D59D
+:10E260003BB5F7B5444CCBB5787816B885E418C003
+:10E27000B1C1363E9A7CD4EE1705F8BDB133020821
+:10E280004CD4138FE970AEB4CC349CEB70399AB592
+:10E2900035B783FC2D81E8F7CD22E56FDE4393E9A6
+:10E2A0005CF91C8B7EAECCB438B995A6188ABFD960
+:10E2B000ECF805DDBFAD52AD32DE5F39AEC9C58FBA
+:10E2C000B4F716CEC7C4A922D0CD4B99BEE199139D
+:10E2D000FBDFC32D6F5EE246F896E3B9076D6A7601
+:10E2E000DC807189140F3A85B46D88E067D6CB5B0A
+:10E2F000797902CF4FC9DCB31EDFC344F8723BF516
+:10E30000495E9ECBCB7FA295CFCF281D9F49FA8532
+:10E31000D13B4560912574DBB80A8F068F3EB84823
+:10E32000AC5BB7ABA1F2C24CC6E336324AA7E27A85
+:10E33000A058E07CFFFDFA03BCABB6C4FF867E6C40
+:10E34000FF5DFD04492F893E7CE30ABE79B8FE7B60
+:10E35000BC84C94D09DFBFFFEFDA7EA5C92B9E44FF
+:10E360003A8C1789EE75BEEE7E64D438DCFF5B1AFA
+:10E37000EE0EA1DAEC8E2DB1A4C3F7730A3F3FB9BC
+:10E38000EBA14D86F755F534F21D5BFD1CCF32DC59
+:10E39000783EDB92C9E5514B669FFF0DCFE546E223
+:10E3A0002F0ACFB7A452280CB7D359A588F187F903
+:10E3B0001D367AC7F712068202E63F9A8544D4DFFB
+:10E3C000635817E57F802080FC38A698303F81F5A0
+:10E3D000B8A5E178FE1C5A8B76DAB1645F13D2D906
+:10E3E000978F747E2040F9CF337CBFE982EFEB3307
+:10E3F000F93EC8096621D2B38C29D0A1E898E18AF8
+:10E4000026F72FC053964E859FB7DD2C791F223AF1
+:10E41000665972B7A30FCEBA3C58A4BDBBA4B7FFD0
+:10E42000ECE9A786D17B437DEF850F7A1F785ED517
+:10E43000C2879E983048B9266777D7046E0BD7F706
+:10E44000ED1A9C9FC9D4F5805FD70764C7FDEA66C3
+:10E450006E3FEDBEC2BBE67194B7AD26DA4F9F6C3E
+:10E46000FD0BBDFB78AE94915D37D0B82723F07ECD
+:10E4700072E75319FCBC2360D0EF0B9F7CE9D2F00C
+:10E48000784B00B3923C89BFC341783FE451AD263D
+:10E49000A4D252F2C75858258F53C1F90EC777B886
+:10E4A00082943A5927A571AC875299C9E49F4E646A
+:10E4B0001E4A935929A5A9AC52E0F69D9FD20C168D
+:10E4C000A4340BED53F4F7B01E4A15BCF11916BF76
+:10E4D000310C4F4C87E37BBCA5FC7B447C9084785B
+:10E4E0009C10459E47C40549ED5524CF312E684404
+:10E4F00072FFF71474F9BD39B3E43D94A72F657A20
+:10E500008F617AF8D9DFF3FB15EB05B2AF4FD8670F
+:10E51000581440DD33895E7A07441559E94ED0EF2F
+:10E520007375FF3FFEE871C208CC16F3A9F0F81D21
+:10E530006673E6E379F11CADEA1CED1C648EE60718
+:10E54000C1F7CDF83D3D0FDDB79FA39D3FCC89F0CE
+:10E55000BF30BFD5E04751F11758C71CBF40E70691
+:10E56000736266BCDAC506A693B0FEE8DE5F798406
+:10E570001F6A487F56447E6E647B9BC06CA9F89DE1
+:10E58000D3D3333F54C8AED3FD5940700AB56BB0F6
+:10E590007E487E21FFD5DE70382565F17DABDD7FBD
+:10E5A0004D5CB47797F4742ED867E6C4FEED6147EE
+:10E5B00098807CAFCB619DCE7371638B7C946F0927
+:10E5C0000C1697AABF77DDF4809FE1BCEDA155F44E
+:10E5D0004EF5BDD92AF96A6D0501BA1F10931F7057
+:10E5E000A951E6D784EF3A037F35C51ACF4D966718
+:10E5F00071FE5F9EC5CFB50F5D925A82E7D9EB14CD
+:10E6000091EE0DAF53F8DF2D589735D43BE536C367
+:10E610003DF9B549DBE81D20FB57DB19DA93762974
+:10E62000FABD94DBB4F13769F537276D233F49C351
+:10E63000087EBE1F59FFC08887E9DDC7C65CD8EFDA
+:10E6400062FA804AFDD78F78B80CDBDB428D86FBFF
+:10E65000BCB3B3F8BEDAB697D3A329CF121886F4A9
+:10E6600020F929BE40AFD738C079D28D595C2E36FB
+:10E670009903744FA649B3879667C56D407B675D64
+:10E68000D68EA3C8AFE7F2189D37DA434FD339824D
+:10E690002DDFC2EC82F6770230BEA32048F8416736
+:10E6A00053C840B7317DEF6C98FAF75FF78DDF857F
+:10E6B000EB6BCCF5D3F843ADF74A8D4E1B35FDDA45
+:10E6C00068379EA35568F0BE5E5B97ED1546F26411
+:10E6D00010B890BD77E3D61137A27FCAB67F48380D
+:10E6E0001AEAE7B2B2F868FC1229FF9D0562C43B42
+:10E6F0004A02CDEBDC5E417B6F91BF63D1670704BB
+:10E700002DD8EFBF6D2D3F782DCC6791CFE9C5F89F
+:10E71000C9A7B6EEA07BFA8B5F34537CC2C8AED9D2
+:10E720005C0EB6F27712F5F78D2E69B51ADE9B5A9C
+:10E73000C2C2DE5184F1161F3B798CD13D63E37771
+:10E74000FDDD8066FC10254E2DF2DD8187B222DFD3
+:10E7500023D3DE1D2888EEA7897C7760575024BD1F
+:10E76000B11CE358691FB0AD04F73D55C704F21B57
+:10E77000F4E743E5B13C73585EF0103DAAB131DED9
+:10E780009D51F8E9BD6C4E2FBBF1508DECFEEA0DAA
+:10E79000A12C4CEB189E37D5AE90643CD7AE0DC47F
+:10E7A000D0FD925A590C60DC48766C890DFD8F2C97
+:10E7B0004194F11EDA34D354BAF764B9579A40EF52
+:10E7C000B3EE58D489F7EA6A5D12433ECE4EE0714B
+:10E7D000042C5DA4F769EAE43713E6E03ECEC9EF06
+:10E7E000E9E5C82CA00868D779199E2FC366A53221
+:10E7F00004A657B6E00DE17B576CB255DEC9DF9930
+:10E80000B971DC24F203D3CF81B669A1DFE2385EAF
+:10E810005B29E2FFAA7B93C91E0CB84C0CE3003FB6
+:10E82000CDE2E78296D892D0FB38BF590EF2ED06C2
+:10E83000543111F1F07ADBDA99D7C0777340A278BE
+:10E8400087FCAF6B6FBB06DAF7B459E8BE850E27BD
+:10E85000A54E32BCDFE05E6DCC5B22DEAB9058583B
+:10E8600039E4DFC179905D55C642E171BCC95E7E75
+:10E87000E82E3B894EBA813FE9FC43CBBF8779A0A4
+:10E88000D776B39FF0DEFEBE40FED5836DF37248AF
+:10E890005E3A966EC7BF635275949F630E249F9F26
+:10E8A000CE52F47712ECDA3B1576F47B45D2535D09
+:10E8B00035F3609CA12DD011331AF17BD8ECC1B097
+:10E8C000E67A4D3E4A4E2EC775BA894CEB23E8AF27
+:10E8D000DEECC9F743FDFAAF4DDABEF1F48D485FC7
+:10E8E00092ACD0BEDA9CC53C680E9B933B336498D7
+:10E8F000C7E8172D1EFC7B07D39E2B8847393FFAAC
+:10E90000B55924DF104E882FA9CAE2413BD95A9548
+:10E91000EC9126603D27D1E559A785EC21A9CAE1F4
+:10E9200027FBAB6D924B09937B6BAB658F64C6BFC6
+:10E930008F63A374ED00F23E27412C45BFAB45B376
+:10E9400097D3B475A5653B284DCDE6F273BBA4CE35
+:10E95000A4F77B816E30EEE6C06A4EDFCBD36DA4A8
+:10E960003797BF3E3C6D30FFE093D52E4F1E0076AB
+:10E97000DBEA72F2DB16AFFAA811E96E79AC4D460C
+:10E980003A34C58DDC3C15E9FEF766BAE7591B3B06
+:10E99000499913D69F29AEC885F030896A06D2738B
+:10E9A000C163C11BA5C94827EA16BCCF5F98DD7AB1
+:10E9B000A304F2A53D56CDC0F3B2A9D95B793E457B
+:10E9C000DD22209F6407783E5BCD10213F23FB09A9
+:10E9D0009E1FA16EC1FCADD9ED3C3F86EBA3DBB31E
+:10E9E00077DD88FAA8D6EC2943FFF4B330FF821113
+:10E9F000F87783787A870617BDFC79FC6EC6BF333B
+:10EA0000C4D3C8F217B476FB0728FF8D56FECA00A0
+:10EA1000FDBFAAB50B0DD0FEA0D6AE6380F687B4BD
+:10EA200076870728FFBD56FEC600FDFF516BD7391C
+:10EA300040FB37B5766F0DD0FE88D6EEE800E5EFE7
+:10EA40006AE5C722FAFF40ABDFA57D77C736BC8BEE
+:10EA5000F69A1BE415CA93FCD806F2776DAB2A240C
+:10EA6000FAAF9DC8F5BF4EEF6EED5EC0916C7E6E45
+:10EA700073249BDB01551A9D17AFCADB3815E9F0EB
+:10EA80000FFC9E22E88FA3780F575D25927F6FF9C8
+:10EA9000EBFC5D99E5AB243ADFB8A0F7B4F6FAFCDD
+:10EAA00003DA3CEBB4B4329BBF9791ABBA3C33C2B0
+:10EAB000F4A35936E66DC04F18FF5F97CCF54CFEB6
+:10EAC000AA92063C37A9053D83EBAB775A42E8FF93
+:10EAD000AA97252AAF4B2EF1E379BF2A4BA487EAE8
+:10EAE000931343F84E735D5DA1E1BDCF3A59A2F790
+:10EAF00063A484AB6C739C283766C8283FEB989C52
+:10EB0000584CE76AB04F437D525522A3DCC94D48AB
+:10EB10004E44B93C3787AFAB23B6DB8EF728A4074A
+:10EB2000447A2B60A42C11BFE7D5890105E6D121D9
+:10EB30002F27FFEBCE16ED4C91F1F3445DCEB7FFDE
+:10EB4000621AE9B15AD0630AE931163F2EB5EFFED9
+:10EB5000A6746CB405F5969C61626690CBBFCB4EF3
+:10EB6000A471773EC4F5D608D05BF8CEDAF642C67B
+:10EB7000DF7973D9C8AF5B2E315752981FF377D91D
+:10EB8000DC8E67A6191EDC678FC0F710C3E03BDC84
+:10EB90006FD45BB943E8AD9C2A909761F5AD2ED94F
+:10EBA000900F666BEF2A799807ED9B69CF6D257DF5
+:10EBB0007216F50943FDF2C798D1A85F408F5859E6
+:10EBC0007F39A8CB63DD6ED1E574ADA6376A23F437
+:10EBD000C6D072F7EFAF8F22FA140DEFD00C247F5E
+:10EBE000AB304E00E8DFEC1348AF30C947F7FB8786
+:10EBF000829BD95C2ACBCEA1E1674EF92201E5B414
+:10EC0000D927793E8A724F6A28F8EAF52CB6CCC724
+:10EC100050AF7D716C653EFABDD69A3B67EF42BA44
+:10EC200015E2E97E87A2F91DB655EF672746603CDD
+:10EC3000FC7B5BEB26E0FD71AF4CFE92F41205DB32
+:10EC4000D9619F9E44761CDF6F32D9E75F84F6FC62
+:10EC50008B1605CF050E3FABBDDF90ED2478DEB3FC
+:10EC60006705B5330B952E7EDECF08DEEB3212F949
+:10EC7000DF0969B76976E3998DDE3CE857EC1250FD
+:10EC8000FFFC474EDB461BEA0F6D3FC058DB4DB81B
+:10EC9000FF09062C5A7DBCE8CED81E51D0FDCF5EB0
+:10ECA000C9156E875A6EBA2A0BCF43E5D112F49775
+:10ECB000B1CDBED17C05968B7A7B2F5E1E42F1A52D
+:10ECC000E725C0C3331D5AB99AB6F12A98CF1E8BD7
+:10ECD0003E3E18D445389EA8D193BC11FBDF5DA2FF
+:10ECE000B7EFD9E89D4AF3B9DE047BB07C77E646FE
+:10ECF000677ADF7C87E7E46EAC81B59F56BAE27035
+:10ED00001BB7A4EDA354D4DBEBCAF8FD616400F497
+:10ED10008FE8F7882FE06DEFCD2ABA62FFF3D03F7E
+:10ED2000E20AA06899A9EB9003E0B6647FA5CD2C18
+:10ED3000E2FB5DA52ABEDFA5B75BB27736D939CB3A
+:10ED40005E194769947687F1FECC776867B35CC437
+:10ED500078A7436F2EDDA5E0BD99CA06A789EA33DF
+:10ED6000EEFF8ABE3EBDFDE95D6FFE04C73BA374A6
+:10ED7000A55E07B5D785002E51DAE9F5F5FBD55329
+:10ED80005CDECBDCC07FFF70733E6452A507EB07EF
+:10ED90006D7EBAC76637FB4B519F002A0318A7A0A8
+:10EDA000A753DC79FC5DEC88EF91FC15B4B1A41994
+:10EDB000282F574874EE1EB4A98EB1906F817D4AFA
+:10EDC0000D4C69CDB823E3315EA0659F93E47AEDE5
+:10EDD0008A0E5701F295C7C2D0EE6DB9A2331DDF7E
+:10EDE000BFAFBBD752F604D26F68B9EBAE303B6C05
+:10EDF000780E8FABCF4EF097213FDA811F511F372E
+:10EE00009A7D367C37454D1729AEDA0EE56F50797D
+:10EE1000B656EE997E0DEDCB4419E7559F37777ABC
+:10EE200009EA355722FFFB8423AE2A9B0FE501D95F
+:10EE3000222379DD9D53EE43383D23792A91FF9EAD
+:10EE4000713A658CC7025949FA401A914CF15956EA
+:10EE5000EDBE53F638AEE7F57936B9B9FDD0E4B674
+:10EE6000101E5A623B6F2E867631F789B20AFD3743
+:10EE7000DEFB7029C6273E76EF913F637C6B53AA79
+:10EE800044EF0CECAE0979B15E8FC03A77801DB9C2
+:10EE9000BE6A6627EE47D73345417B7DB730D38FB7
+:10EEA000FAB92745623BA07E4C9E315ED559608CF5
+:10EEB00097CAAA30E637E6F8EEC7754DF8436131D8
+:10EEC0008E9322280A3E1D5CD8C9283E3F352F4F1D
+:10EED000C6B8EEB8C28838D8A9C67E12AF32962717
+:10EEE000CF8888DBBAD558EEBADD98CF986BCC7F47
+:10EEF000AED3A38B9F3FE87FE7E1B17B9F64A8A7D8
+:10EF00001BBF8AA778568423DAED3123250F9E8B09
+:10EF1000645B3A67611C1CBB3486ECA583EE18A6C3
+:10EF200040DEBA94913CB526060FE07ED52ACAA5EC
+:10EF30002A69A8E081F7A1DC01FB5594BF91F0CBD1
+:10EF4000CEE6FE416725FF7B7141294476847D55DD
+:10EF5000BC5CE3C1AD63841FB6222CCFE3BD1F7739
+:10EF6000F3F338BA774F477284575819E26D320B72
+:10EF7000E03B94D9F77EA486601EEB95BC4AB4337F
+:10EF8000D6895D348E5AEEF4E1BE3B05E3BC4D18E4
+:10EF9000EFAD521A898FE7DDDC4E52D85C3FE2D1EB
+:10EFA000355BA4F891FA43317578F852AFBDD7A01C
+:10EFB000C7B1E974F9B29BFBE7F67488A217FDE0CC
+:10EFC000B7E7ED407CEBF9565F721BC5F58FABECF4
+:10EFD00042BA6437703B14F400DDCBD6E3C4F4B816
+:10EFE000C2EE1C1EBF763A47BC80BF901E47141667
+:10EFF000074E4777263CBAF0CB78DE933DAE5446B9
+:10F0000039F34BFDFE05E3FDE2F385746E3043F406
+:10F010005EA2F9D3D1AE4BD2C64B4A96BCF4BE3BEE
+:10F02000CC4984FA0F315E3F296FEF4ABC77B507B0
+:10F030000907F9E72E0EE748BA4DEFF0978E4178B1
+:10F0400009A00FB3FAD3B1E06EA5F3C0FAFB58A242
+:10F05000755C7FBA9E68E2F64FCF4285E22C87A2AC
+:10F06000F393EE04EEC74ED922A37D9B91F7500D8A
+:10F07000DD83B98FC9A8EF323A3A6F46BF57243FB4
+:10F08000041C71E3799CDCB7F3C39B4C9C3F589AFA
+:10F0900044788B8C2F8D8C271D9E93A0F929400FCF
+:10F0A000C4E27D00F94A8C13EC59C5E89D809217A3
+:10F0B0005B6EFB77E8EFCB111619E575CE5BBEA74B
+:10F0C0001C30AF2F5FF2E5A09CDE2675D913C2FC81
+:10F0D0009E92C8EF9F45CAEBE139A246AFA0375CCC
+:10F0E000DF3DCD46FA06E20AE6A58E968108876FD7
+:10F0F000DFF4275BCAFFA0DDA2DAFCF8F746DD1DCE
+:10F100007A3E8BECB09CB778BE685BD6465542B869
+:10F110005590BFE860F63CF21749EF727FD1189323
+:10F12000378079F69E9DE2EEDAF7DDBE00E3D5EAA0
+:10F1300053AF53503F176AFB9FF139425478491639
+:10F14000AF0FF926F27B81065FC64A3F9D0DF81B83
+:10F15000F3B885E2EEF2C5F2865CE4874613E1B3CC
+:10F16000DCA42C6D0EDBA735A71697E44CA47D011B
+:10F17000F3C18641E915980FDF614A3E5E8CF49A2F
+:10F18000036C86F22547E506644E550CF385D1A93C
+:10F19000D22B51FDE6546F498E26F7F0DCC7ACB197
+:10F1A000F43389A56C36EA65F8867AD7BC2B869F3E
+:10F1B000F7241BEF479A4C3C5EE4266DDD663CD796
+:10F1C000198FEFBD8921EBD8FEF56FD5EA49366777
+:10F1D000C8148F7EB2378ED2BDCB887360DCDF520D
+:10F1E0005C4E05233F28C285F2F7C8FCDDEE2A1EDF
+:10F1F0000F50BB9A09781650ABDD5351EFE07F8F6B
+:10F200009879BD0ABEAF425B4C05FF0B11FFBA6C8B
+:10F210002C11EBA7B34E8A63641D4CE1F112C67347
+:10F22000A76D03BC03A5FB01A42A13ED5346BF66DB
+:10F23000E77F17AA8AD13BE1F46613EE7F57B380CC
+:10F2400024F4F9E18E642BD44E3F8FDDFDF50719D0
+:10F250002897F3C51DBE37C86E889577A07E8C3180
+:10F26000F2A17E7FAD56A3936DD532E15B2F77ABD4
+:10F27000C729DE3E87F5D4E03E2BA72AD180E70BD5
+:10F280007ED9DE4CE69B10DE6F80BFAB9B27D13B67
+:10F290005D4AAF9BCAB7552B43F43F6C80FED389C0
+:10F2A0009E06EE3F8BCAB787BE48B81140B1ADE7A6
+:10F2B000A38452A5CF6E8D84B37BB5517EFF607F52
+:10F2C000643C39878BDDEC4DBE19E0667F40F4B4B9
+:10F2D00031FC7B3CC67AD373CF25F0F372BD7E2818
+:10F2E000F916AC0FFBDE3605FFBE8FB17E69F1C7A4
+:10F2F00009FCDC5DAFCFE7F7A35E63BD48FC44CEFD
+:10F3000017E695F2E3B0795D69B31ACACB66F79B4D
+:10F3100057CA4FC3E6758DCB58DF57137D5ED7E7CD
+:10F320005B079D975EEFA6A28BAB17B98E5BA65BC2
+:10F3300007803BAFFFD3B28BEBF75F160C5EEFCECF
+:10F34000AAC871542E272CDE2328E7CA99B216DFEB
+:10F350000967CE98A871C1259A1D7316FD14180F60
+:10F3600097E97D1FE55A4F368F4B39FCEC223F9EC3
+:10F37000C32CDF6751F0BC235BF35B83E0598CFC4B
+:10F38000BBC72627603CA0CDAD68FBABCE5C8CE74D
+:10F39000DBD37EE436927BCC68CFC07EAD18F535EA
+:10F3A0008830BA97F126B64B098FA3F092FD572FFC
+:10F3B0007AFE42FBAA9FF07D951EBF1F6E67B14982
+:10F3C0007D76961EBFBD491BE7BF7286D17CC0CE3D
+:10F3D000A7BF7B9B9A27517CF32F6D9D9BF0FED19D
+:10F3E0002F939313703F73589BB76E37EAF71AD277
+:10F3F00066E78D334581D7FF0791B1925A008000AF
+:10F40000000000001F8B080000000000000BDD7DE5
+:10F410000B7C54D599F8B973EFBC9299C99D64F2ED
+:10F42000E211EEE4C5044298608801AD4C12A0A838
+:10F430002C3BC147412D0E893C227921A8A1B2F570
+:10F44000864484F8206840A0A043148A56ED6011D9
+:10F4500001C11DA2A6764B6DECF661A94B47602950
+:10F4600002C2A8BB487F7F2D7BBEEFDC9B99B99978
+:10F470005150B6DDDF9FFEECCDB9E79ED777BEF7E2
+:10F48000F79D33172FD27F93087928892C0C1413FA
+:10F49000FCC7951162CFCFEFE9741232BCD42B8E2A
+:10F4A000A3EFDFC9D111329E9087E983D07AB9509A
+:10F4B000F06FE3E8DF22212BCBE9F7D030979027DC
+:10F4C000C57EBB40EB9F7408A2CC413B09DBED7CC1
+:10F4D0004BA7F3380879EA8EFC1EDE19296FF03944
+:10F4E000B64279B88EF80216E8445C44E8FB9D26E3
+:10F4F000D1DE594A8B42BFB3C64ACB3B7E7F1B67E6
+:10F500002364C40882FDD5B55693635711B2DB104E
+:10F510007EF322CC673DE7DF46FB79ADBB74AA40A2
+:10F52000DBCF3B4988997E5AB7ECA6278FA71132CB
+:10F53000E1B85809EFEB36DBDD3C7DDFD4DF321577
+:10F54000C6212DC45DE0262493AFE4ADB49FCC4723
+:10F55000DE73B7D329AFEB95F6846839BC9573F7A2
+:10F560004850BFB87431C0C7E2912C74BD7361AA12
+:10F57000F8DE3E550FED6E32B83B683F67F4641617
+:10F58000C0F1A20257F539F70EA982D0F9CF0D2CA0
+:10F590009B8BE38A1464D9B46C12711E26494C6D9E
+:10F5A000A3E5CC2462328F23A47C85D8F7008C5F3E
+:10F5B0006F157B288C6D1562DF8F605D2D3922EF12
+:10F5C00086C1FD0807B5FF791EAF81D07147EF30C6
+:10F5D000D0CED83E5EA4FF8D09C496C7EE892D9784
+:10F5E0000663CB57BD135B7E5562F09E681ABAE581
+:10F5F000388577EF012381F92E3A9DE4375278EF71
+:10F60000D31302EB975F32223E542FB278003F4E65
+:10F610009F4ADA6AA4E5838793F0FBBB7F6266DFCB
+:10F62000EB022F43597E3999C0F78BD202E5A974BA
+:10F63000DEAF7FC9DFE92D66CBD243FF2F176DED1B
+:10F6400084FAAB02E5227DBF7B1421FD502FF84BDD
+:10F65000609DBBFFC663BFE1E78DFE1EDAEFE9BD2B
+:10F660003F7E19E075FAF9A1A91C9DF335BA9EAB4E
+:10F670003AA1BECD2AF5D0F7134FBF98E78BDA97A2
+:10F68000453B8C31EB5C2C71B8CE56C1B3E259D8F6
+:10F690009F437AC4A725F3FC7541DA7E0997E39668
+:10F6A000A11F03C5D36228BB33ED145F27DA18DE30
+:10F6B0002E31D3729C7D579FB51B78E2BB2A523EF8
+:10F6C000BAFAC7381FD7C9F711AFF7E9655D12C09D
+:10F6D0007135E7DE46E7BFCF6C2B2129F0CCF10373
+:10F6E000DEC81225BC745CD78F9A002F7EC5BB7B09
+:10F6F00048E2F15C597FDA3CF9AAAFA8A7E33A4B9C
+:10F700000839F751D29D1E3A8F911B62F7BDC81F71
+:10F710005B5EA5C0A79644BD77C27C725766219DEB
+:10F72000109C8FEBE407B739E97C8718490BC0457B
+:10F730003BEE5A651D2FBC40FB716137FC459EF5C1
+:10F740002765D07D51E8EA758ED111FDB77428A5E3
+:10F75000B7451CE32FEAFB459A79A8FD4F94189F03
+:10F760007218DC6B42B8FF4611F6FFD483D39E3C7F
+:10F77000AE1F3C9F130F7A3C93A3DECFDFB0B82FB0
+:10F780009BB66BD8993E8E8F826FC3F36F66DC4E4B
+:10F79000DF9FD921B8810536CCDEFEF844F8EE793A
+:10F7A0003E00F3857A0F5DEF99C0DB36F86EFE669A
+:10F7B000FB385E8AB45FB0618A67B22B02CFCBA5FB
+:10F7C000D3D72A189F5B14D0FB4D401781DF4D1D06
+:10F7D0000A78BA817317D071CA051F0F74672DF3A9
+:10F7E000E8E509844CFAE25FFB86D0FAE603E3CB56
+:10F7F0003B697DA7CE7BD33F01DD3DCDBBB7015D2E
+:10F80000FFF69E0C5FD4FEBC03FB4BF7A5F3D606B8
+:10F81000EC47A6B85140997AAFABB61ACA138B0918
+:10F8200067A4FCD8769278FC16188FBCAF4B25E401
+:10F83000E4FE874A041DF2A3DB814E4E139B1BE8B6
+:10F840006E9FB5E5DF71BC97F438DEA4600A07FC53
+:10F8500077DF739CBB93003C62E9EFE4C915B64ABD
+:10F8600046D7777A510EE88883F6B7F0D931C807C2
+:10F87000D4F7DAFDABF7C7F6A3C58B8F9475016A91
+:10F8800046E397F6BBB4E9B201E8B1A195CA8B286B
+:10F89000BA6938DE652096C1E3103280BF04F09764
+:10F8A000E2259170BD66E41BF41F67A2787B0AFE17
+:10F8B000CA636542C7BF9BC3A59145A30285C0E744
+:10F8C0003841ACEAC88EF05752E1473E7F86FED9F8
+:10F8D000E906BE103802F40EB2741BC817317876F0
+:10F8E00013D4CB233CC08F860092D227F96932F221
+:10F8F000DF3352683BB67F718C5BA6AFCF01BD583A
+:10F90000B09D2D358A3FB505DEB48568F9F4CEB4D7
+:10F910002ADE0678FB4B1BACF35420ADCA604BCCFF
+:10F9200037B47C93CE0CE1FB21FC49F14E747A9202
+:10F930009D00EF0E2A74419EA5B594B6C4D937B583
+:10F940009DC3D0522A01FFF8BEC5DDC3E0463CB4DA
+:10F95000FCE93B693DB0EFD7E8742817E672AC7F4D
+:10F96000B57D913311BF9666071D117EFD84228FF0
+:10F97000557EFD8495C1E372F9B5F639ADB328051E
+:10F98000E0F7299152403EA59AEA9E013D43AD7FA2
+:10F9900022811E50EA64FCE99D838529214BA4FD48
+:10F9A0009FF3BC6500B7ACAA7E0F4FE79F7503714C
+:10F9B000B7D3651DE3DDF789147FEE2254BEC3B3D0
+:10F9C000CC67003E483AD211BE84B8A7C2FE2F9839
+:10F9D0004EF1A59495411ED77B0DEE4EAA37D40962
+:10F9E0000C3FEA7670FE760AB2BB1E8DDDBFF9DDF4
+:10F9F000C6081EC3FF6D8EAAA7E3D40BFE95206731
+:10FA000087514D29AD82E2EF73B1DF2F22419C5720
+:10FA1000C38B178DF1F0E2BF15BCF8739E6706AC7F
+:10FA20008F9B69C2F92C7989437DC06108A0FE13C0
+:10FA30005E4CE5079D2FF92DC39BFFE4BDB8EEE6B4
+:10FA400065733D77D17D38D75AE7B98B56216B80E6
+:10FA5000FD0E307D6FD1E4401FF24122BE727B1655
+:10FA6000F4E74578501889DB101E028EF7DFBF657A
+:10FA7000F8749BA2375EA39B89EB0AD713B187F278
+:10FA8000B9892F1EC432FDD772FB4478B07EE6B729
+:10FA90001011E0BA80C8064269ED01A713F7AF9EC6
+:10FAA000F41B185DFBDB3368BB26AA6F025F8BA3D8
+:10FAB0003F7C3F1A1F0F6BF0F1F015C3C709884F49
+:10FAC0009F1137E2D36D1A7C3C9C001FDB07F0B11D
+:10FAD0001CF1596D4FF550624E1DFC3DE08B276ABD
+:10FAE0009F176E8E2D93E7A2CAB98017B41C852F7D
+:10FAF0004DBB2E1A3D71F064DD80BCF717D58C89A3
+:10FB0000E6136D38BF230A1EADBB657E36F0E935BE
+:10FB100060700C513AA800F946FFC27D234113EDF5
+:10FB20003FE9AA8132D697AF6065FFD65F7B375C2D
+:10FB30004BC87ABD2F5BA4F0AAE3BD7D3A902FF9A4
+:10FB4000BEE79C6057E83C3902EEABA7D03B0636D7
+:10FB500094E1E353E35A8A5AE2C04F9DFF7A2E1094
+:10FB6000D4019FDECBF4376B59581F2D5FDF703205
+:10FB70003994D21B427C0DBFCA11B02B36726BB3C5
+:10FB800001CF36664B5C3B5D53D9AEB64AC45FCA03
+:10FB9000EB0B28DE35EEFAB06F282D974DEB07F40E
+:10FBA000A3EBF62E7E1BF8E5F824669724B76CD5F8
+:10FBB000D1FE32EF748D6BA7F8F6A653C27192AEE8
+:10FBC000EA3A08FD84174B620FED276B85ECBCA762
+:10FBD00018C66F6943BCAF21F83EFD7BCBDBE0BBB1
+:10FBE000478690541EBE236D1C7CB7329DC3FD58C2
+:10FBF0003997CC7AA518A84844BD7ED82C916B9B28
+:10FC000000E5964AA41749B4FF321BA9AC2385DA54
+:10FC10002DEB6C04F975BA8EBFB3863ED78D63E5C4
+:10FC2000D4E59CA70789772DCE2FD348A671A9ECE0
+:10FC3000BDBF18598E6727D6FB71BF33AB5B4A61D6
+:10FC40001E9979ECE930F874F974FC43EFE9FD2B67
+:10FC5000E83A0F29F8B2746B5566B45C3B74C6245D
+:10FC6000E8A8DE7C284BB5178216B0179696566723
+:10FC700002F3C8CD9F9602FBEAC889AD3FA7F7A45F
+:10FC80005C05F2FB3D9EC0FEFD97C59302F4798DA5
+:10FC900081CD5FBBEF9F29FBD97C8123FE28BA6C05
+:10FCA0009E751EEDB0E60B42CCFB330F9A08A810F0
+:10FCB000037AC5C2DEA9F05D23E95F0978D8184848
+:10FCC00026FE28BAB82629FEB82A3D345FE0891CF2
+:10FCD000775C43ECFB0B69444E8BF75D46EC7BBADB
+:10FCE0008E98F29ECF07D601EF4945C8E6A576F873
+:10FCF00074D05368F99C5F27EBC7029B63FCEBACA5
+:10FD000018B201FFA2FA480BECCB592984FAC63984
+:10FD1000CA9AA01EE4780DECAF10B6CDB446C65119
+:10FD2000EBA17DF43E9E9D652041DC9F30CE03E03B
+:10FD3000278F2464D3FE4F0C12E869FB0F22FC547A
+:10FD40007C8986A31CC56F32DAFB833A4A5725B9F2
+:10FD5000196B8B8BE896F5AA7C216BAD87F2810C31
+:10FD60005E17C32792CB06F806B2A9753A5EE13357
+:10FD7000D96B275F1B5D66DF47DA0FA981FAB26294
+:10FD8000D6BE2277E87B2B40F6922E9C1F5D470E55
+:10FD9000C06FA06CD2942DB43C26AA2C6AEA1D9A9E
+:10FDA000FA2C4D7918FBFE8C359803FE81EADC11A4
+:10FDB0003502A5D333D9C1391C2D3FDAEEAC994CAD
+:10FDC000E9B4B18CE9174DFB39374722F06B723338
+:10FDD000BDDEE20E19EA8A010EFD7DC0571AF670EB
+:10FDE0002247E9C112D819C432B493A2DA05386C9B
+:10FDF000D710F810DB25ECDFA5433AEF741D65DF63
+:10FE000005FE827ACCC31D8BBDC0D8FAF48C6F512D
+:10FE100029E7194A1B36EDA9213E4B84BF9ECDF63A
+:10FE2000BC89FCF50027027D0EE029F46B89D085A2
+:10FE3000FAFD9FC6ECFF1DA849C94B3F6913E8F7BF
+:10FE4000FFD1F897F1A077FF499123EB397F118C0F
+:10FE5000BB89F88A408E7FBFB1E0A08E7E77441FB9
+:10FE6000DA02BCB73DF76A84DF116B683847F59258
+:10FE70008772AB6A040ABF23E9A12D00CFFFC8AD8A
+:10FE800066E5E1A1E13A5A5EDDD3C4CA05A12D5071
+:10FE90007EA567362B8F090DE769FB3CF93684FF99
+:10FEA00036313E5D2FCB65FAAC3ABF87CA3C4B7307
+:10FEB000418F6E60F267CEDD876703BF9DA323226B
+:10FEC000A17C7ADB99632F6DA3F0D8D69A4C7A186F
+:10FED0003A7A056A6F6432D4A772A20BF97AD8C94C
+:10FEE000F41BCAED42E0D74B1E6F923A9D917D51B3
+:10FEF000C7CF1CD5B213FACF9C538C72C4ECF41C40
+:10FF000081F1D5E7F451EC79245764FC9BD779F063
+:10FF1000FB07AC7EF87E8D99AD8BD20FEEB345D941
+:10FF20009735CABAD6E4323D63BA73CA91DCF1A000
+:10FF30009F28F6CEAA40FA283AAF6E8E04C06EA46F
+:10FF40007A8A6C063E5C9F84F64C37CC1DEAD766F5
+:10FF5000FB653ACEED1CF1027F51F949B7DD939D67
+:10FF60001A65377697D2B225E227E8AEF1642739D1
+:10FF7000E099A1031B4AE54FDD4ED64E954F99ED12
+:10FF80006C9CCC35453DB09E6481A0BC9B37ABB02A
+:10FF9000A70DF58399386FE2F16473B4BFE3F5B947
+:10FFA0003A80A3BA5FDBCB3C2FE0BA78E6F750F794
+:10FFB0004D85EF915CE6F7A8E3A97E41F1EEF17C77
+:10FFC0001FF647F58D1214EC8ABE710490767C04FE
+:10FFD000CE44088D87F7FF1FC2AB1FF0E9DBC2AB31
+:10FFE000B195F211DD25F011058EEBB9A03E93F12C
+:10FFF00011F44BC07B9047CF3B7DC773A3E861CE24
+:020000023000CC
+:10000000038DA867AAF34ABEFFB569DF234087A71F
+:1000100090EEE6FC2019FD085A3D50B503557D359C
+:10002000911DF8A9420F6ED5EFADCC23B938F4D2AB
+:1000300063145EA9C42A021F3D62088D71D3F6477E
+:1000400074BE675F83790FE145CA4306F5F7421E28
+:100050008FE39B553C2161DB2847044F56533C31CD
+:1000600041FB1A03DA25DD76FFC6F98027B70C734A
+:10007000CB12CA61A467B93519EBAFD11D25E0C712
+:100080000F4F1045D033295E617DF7EC42BFCCFCA9
+:1000900031B219FDD349FE1EC0BB520A00E86FF60B
+:1000A00028AC077F08FA91669BD87883F18AF92DEE
+:1000B000461256EF54F0B63E17F136A39D303F90EE
+:1000C000E029A989D217BE9FC7F022B92CF4EA1FF4
+:1000D00040FF7CD4EC2E20CC6405FF12E9CAC4FE9C
+:1000E00028BE8CC81BCFE438F47BD7E3D6AD8CEFA9
+:1000F000B9CB01CE0F5BBBC832F40FEA71FE9BCDCA
+:1001000041D4C37526C90E7EF8393C595F08FDB548
+:10011000EB45C0132DBC2BF312F91F42F746FB8BA6
+:10012000E71865630ED43F6846BB40B5FBE6A430D4
+:10013000BA52ED3ED5CFA11D47B5FBEED4D873031F
+:10014000F59D7F2DA8A5FDFD59C13377EF8582B9B7
+:1001500016B66EF03FD5C25F74DCDAE5E60FC1CFAC
+:100160005C2BEB83461BF091299E50949D4636B044
+:1001700075F87EA5F7039C5A05B27E3BEC8FCCD672
+:100180004FEDD8FAE8756D32B075C93FB0C6AC6BAB
+:10019000938DC591BEFDBA3E1A1FBBAE93E3957514
+:1001A0001153066DA7C8B93B5BAD1F7225F409EB6F
+:1001B000A24FB29CAECB1559D7B23CC64FE7287CB4
+:1001C0006C90DCCD637A7C1CBBFDFFC67ABB9EF2D3
+:1001D000C45BAF769D7FCEF3FC202F1DE9262896C9
+:1001E00045F0DAB791AEAB0CF635DDDF86FBCAF031
+:1001F00093109B1BF8D89279745DF06CCB447FE12F
+:100200001CA3B407FCE6E44729CA3A09F281251B7E
+:1002100087235D52BC6574FB14F3BF2C317BD17F07
+:10022000B364B1E8964558FF2B680787297F45BD21
+:10023000A43596AF7F3D1CCC39B5C5D17030E5CC27
+:100240002D8EB3EFB211F139D1BEFF990FDFCBE59F
+:1002500025F69790E5B17E0AF0E70E94F9C165ADF9
+:10026000DF8390BF1963BF9713E051E8FBD1787427
+:1002700044AFE0D13233CA1F158F8E5815BF900698
+:100280008F08D5A2818ED5756BE13807E018C72F8E
+:1002900044F1A900E07844B1CF283E15001C553A3E
+:1002A000B8B395F1032DDCFE9498AF7DBB7568F073
+:1002B000F8DBAE43AD4FB40E55BFDDC02DDE08F800
+:1002C000B9219B88EDA80787C6809DE430F88B6034
+:1002D0005E9B0C947E91AF303FE1678762FDCEDA82
+:1002E000F95CB8647EC1FA4DC42712E1E5E5FAF97C
+:1002F0006A35703BAAC06910BEE733B9A9F5F3357A
+:10030000DBC24F83DED49CC4E4F7D90356A47392B6
+:100310001F9A03F6C2B97D4602F2A0890B15C27777
+:100320006739CF5CFCAE2D590239AEFA738FED669A
+:10033000FE5C99507B9D961B7CCC1FDD2CFF7225AB
+:10034000C0E5629ED002F672F39E587F20DD0F1B3F
+:10035000ECCF591DE987EF9B787F3D98D8EB0D4C8A
+:100360007F59AF23018067C48F70B410ED9A6C91F0
+:1003700080FFAA49F761E13D517E8726A5BE298706
+:10038000F9D3203F01E32E309473305C9A1E3DFD7B
+:1003900025C4579B7669E93B96FE1B2265EE220732
+:1003A000FD45D53B23F48FFE03C08BC9C45FC081DC
+:1003B0001F909593A7F5FB21CFA159F13FA7F78691
+:1003C000A6827E632D0B10E0FBCD2799DD3471FFF3
+:1003D000D637C13F689FD63F1C54A866251EA5B5D9
+:1003E000D726EC5FCB833F4BB5B7A2FC67453363A1
+:1003F000FCA72BB01DF8E360BC10BC82B881C0F430
+:10040000F2F58A5E4EF577E4F3F3BA46A2FE0EFAF1
+:1004100035E849AA3F0FF426D09F77E757CDC8A704
+:10042000EB9C5D50757DFE78361EFA29C04934215B
+:1004300031DEAAF051BF03BFDE57C78514FD8FB070
+:1004400078D03DBF48FF4ABA5C949F307E7F7BB432
+:10045000FF7D9FC6FFBEEFCAC5833281AEEEE1A429
+:100460004CA0AB891AF9B62F811DB0247F201E94B1
+:100470000974ADB63FC1FB30FEA1C61DEA21CE8294
+:100480007226887189BB5B88BB13F3407C2BA1DC8F
+:10049000B890889D14DF1B26FB58FCA38588374E37
+:1004A000607156298ADE208E195D263B6839460E1A
+:1004B000F6631CA489F6B0C90D7E9AD8EF9B89BF5C
+:1004C0005A003CDE73D118D34F37DBD73B15FCDE27
+:1004D0006866F18389CBB7F224CA8F9332CEE37C6E
+:1004E00008E8F7177AF45FFFA7828F2A3CFE9C5733
+:1004F0007513E05512F8D5E0BB878CA8C71CD791BF
+:100500008580DF6BECE4CE99F479F641E2C9D7033C
+:100510001E8B39D1FE44F5D9B9CFBC10E8E219855C
+:10052000EFA9EF2BA051BA120F40FD3F19F3472856
+:10053000FB2F01BA29CF55ED0E520271880F157E9F
+:10054000DA74ABC507FD85748CAFBF98CFE4C08B60
+:10055000F906DC3FB53CE08F53E8828E83FD255DD4
+:100560004562E2D73F53F055F58713254EB7BE3E9F
+:1005700089D92903F4A943FE9B5CEC35F890FF551B
+:1005800021FF0D7F6491002ED34E37D4C33A3E9D98
+:10059000954420DFE62E254EFA6EBE1DFB55E38BFB
+:1005A000FF40BA8889935E2A5DFC3E421731715242
+:1005B0000AD764900BFB74CCAEDD47110BFD8201B2
+:1005C00025EE2E100FC8AD7DBB46A21D3357F15747
+:1005D00053BE81F66B98CA37B6DFBE8DF3E0BB40E1
+:1005E00001E6237CA8F73FBF1DF49903CC4E53F7D7
+:1005F00063DFBEA17EE03B134F7F9103F0DF77F214
+:1006000085A190E7B14F89AB37188285E84F31302B
+:10061000F9DE600B1602FC5E57F0A6218996E9FB15
+:10062000BC745F18F05ACD8B8176765C8F64037F43
+:10063000CE31C54E3F4AED769817A5967E88F7D302
+:10064000FDCE8672787526D3A7E9BC002F8E1D18C3
+:1006500083EB5BAF67782CEFE5D0FF73541F3ED17F
+:100660004ABF3F9A7D156913413E5FD8DE07FD3FC3
+:10067000CD13A30879479F9FDF43BF3F378417C13E
+:100680002F59A7F34ECD067EB19BF943B4FB00F280
+:100690003A3AAE7B968473D06FBA303700F87376EF
+:1006A0007F11E6D3118748645A6EDECBEC476D7E2E
+:1006B000C4717D2CFE6BFB857581FFB219FE067D32
+:1006C00024BA7D9CFEBEAE7C561F2A5C46E13145B5
+:1006D000F24905517E80E637B2518E1C7BEC73DC0B
+:1006E0004FD2C5E2E8C7F59E39303FFBE4A0A13602
+:1006F0000A1FAF2E50FC5046A65F50FE6B88E637AF
+:100700006A7D7915899B9F525EC0E8DCDACFE4F4FC
+:10071000E07A86E7F7926779E0175743320FED6F7B
+:10072000849267732FF9ECA011F4A94029E6F18CAB
+:10073000581E443E40E78BF8797C630AF247F22862
+:10074000C3D7F93F3222FF984FE507F367B0BC42A9
+:10075000F228CB1F3AF19013F1B97C45B01CE9C1E6
+:100760004EDCA047BDD6F1A1CCD3FAB93BB852C8F4
+:100770009B9CDBE1443BF0EE5D4EDCDF890A5FAF22
+:10078000337A304F923CC3E29C773D518FE334265D
+:10079000133B8FFAB5DF007AC4C21D1CC6C32706FF
+:1007A00018FF6F108207414FD7E6FD107F6CBE0126
+:1007B000C82312A5C783FC211ABB2B76DFE54BD2D9
+:1007C00017B472667141427DE1EFA4C77F337D614A
+:1007D0005981AAC7C7EA0B60FF17303C64726D27C6
+:1007E000C7F89CA22F3482BE00BAB022A75539BFE9
+:1007F0004091F32778A667CC37AEC5E79A0296E713
+:1008000070370929790E6103E87F89F0788D322FDE
+:10081000158FBB008FC747F0B8E164B0CF887E0763
+:10082000F76EC8D368584E82566AB7CF175A509E93
+:100830000D118988F9AFD53E9C57E6126AAF51BCBD
+:100840009C0FB1FC7197AFC70CD25B34FA8A3A6F38
+:1008500015AFB5FAF5C4E57E1EE28BBE9104DFABA1
+:100860004F91044A61BE352666DFD4982C411EFCA8
+:100870000F93F567A2EDCF1AC1F322E33BC3EC2738
+:1008800046234B23D0EF74A7E737A3D2237A7B729A
+:100890005978E563B43F3D29D1015F57C7373B2BFA
+:1008A0003F298638AFD08FF62BC962F92C478A19B9
+:1008B0005C93E93E6CA570D50B32C24F6F12ED6DA3
+:1008C00076D8FF7E8CD385D309FA6DD5FDDA622503
+:1008D00032E4151F2966787FA458C4276D8FF9006C
+:1008E0007A176D4FFBAFDA67463E727EAFD50FFACF
+:1008F00004959323ECB43EE34FD40EA4E5B3FBACD4
+:10090000A8579D55E49B43F5DF9395B8FFEF2A78F0
+:100910002393AAA160EF11EE86A174EE44B5431AA9
+:10092000ED89E2DA4ABDB3FF5686BF46D46FCEDB0F
+:1009300043F74199CE0773E0FA14BC6ADE555DFABD
+:1009400000C81BAFC5CDA0EE2B057DCDC82FBDD5F2
+:1009500044813D955F1E5E06783FDC221A6993C98B
+:10096000233EF8FD6C5AFE68979E18017FB6DD9411
+:100970001284668227CB3B66F07CEAFDFAA3A128AD
+:10098000BEB368476CB931105B6E26C2D15094BCBF
+:100990006AFDA0FED76F45E1DBB902AB03F08048EA
+:1009A000C47D91D2D3F107F7906320BBF93B52800D
+:1009B0009FDF45D9563C7AFFFCC185BF7E8B7E27E1
+:1009C00018AA3E2F40FD5232007DD5523D279E9DF4
+:1009D000BF4DE16B4663CBC9AD143EC6D78DEE3635
+:1009E000DAAAB7C0470AD3C13E0EF7C1BE1A479C68
+:1009F0002981F846D5882F30BFE4FCBF1037C0E905
+:100A0000BCB912F1E9FC46B3047E80EE1C0BF3CBBB
+:100A1000BFC1F9396617CE184FEDE9853815E0BB2F
+:100A2000E1951B41AE4C308A2B445CAE4987FB4DAF
+:100A3000AD63FAEC36C82BC1CFDE4D0DF43637D896
+:100A4000D1FD362086A98512CB9FE05F3498E89FC0
+:100A5000CE0E4F511BFD6E91378940DEACF0A5E004
+:100A6000053C7B18BA8AB22B8715323ED3680A1927
+:100A70002AE977CD5F2C9D96AE8BC47D8C7A9F67DB
+:100A8000289DB77E4F6970287DB5A0B51AED672AFD
+:100A90001F185F3CC0F8E2826595F89E9B390DD720
+:100AA0007B82AE17E0F2E64623AEF7C4700BFA3352
+:100AB0004E6CE1B0BC403460DE2DD5A7D22A1DF0CB
+:100AC0005E2F1AC96078346F7878E5465AFF6E3623
+:100AD0004F388AFF7FD9FC738C4FFD85B0F1E55DFF
+:100AE0003CEA697F11C3E54180A7D4628BB6D71772
+:100AF0006CE1BDC02F176CB9F7DD0900B799B79548
+:100B0000013C26D99766489648BDAA9F0AA915DBDD
+:100B1000812E277D59DD3F09F4C42D946EE8BC0574
+:100B20001DF181BDF4D696EFA27DB0A026C90EEBD3
+:100B300093366F9B0AF2F82F354374B8AE9738227C
+:100B4000023CECAD19F07E012778E3E1D5E1021E0D
+:100B5000F1AA7284C50DF271C1EF78C4174A67B764
+:100B6000425CA9718B1EED8FB7661EFEFD6C47843B
+:100B7000CEB8991B664C84EF7FACC7EF07F4BFCDAE
+:100B80001F7F007E17F84735119043083F2DDD1970
+:100B9000472C2F847969E96FC18A964296EF717963
+:100BA000744836333AF41572C8A7BF011D2E2CBC09
+:100BB0000C3A24C35263F48EC17C4F46BC55E3E526
+:100BC0002637F16CB3607E9487A3FC7A6DA180F523
+:100BD0006B0B999D29FCF59E1DBFA2704A2BF4FD5D
+:100BE000A010E42BF194827C96C26215B8E62D8A9F
+:100BF0009E4B36B3F318600FC1FEAF4F27DB3BA30C
+:100C0000FC5F8F417FE9C817DAA19FB37FFCA20F79
+:100C1000F6AB29E74C09D801CD17FE0BF36C2CFB82
+:100C2000597E96C51DC6BC35BDC38BF8A8F2FD66BE
+:100C3000379343DA755D28D4333EED08633F635C38
+:100C40008C3ED5F8F4A6D6248C136E72F8CDCC8FDA
+:100C500045F553DAFFF4321EF98CA9AC9D801C23B4
+:100C6000153CC6F7267DF16B02F1D077AFAD7683E8
+:100C70001E6C297B5348837556E895FA9FAECAA52A
+:100C8000F5BFBE760ADA73F764F112E853D3CBF2FC
+:100C900064949F1E96273FE98B14A4C319F5335023
+:100CA0000F56E7EB2526C942F1642625D6E8F30462
+:100CB00033AE354B9628FCFAB48B9BC6EC0029E585
+:100CC000E631CCEF162866F23C1A0EF7641970FC78
+:100CD000D905952F01BE4CBA8EEDC3A9978CFE1590
+:100CE00074DC53E6F8FADDFE42E647C815AE47BEAF
+:100CF000B4F42523E66B9CE6E27F7FF72A1EF3CC53
+:100D0000EA5771C44FC73BF5FC6B39C0D73FDAF6E1
+:100D10005A4E6DD47C12B5FF6361227F76F0AE68C7
+:100D2000FFC074038B139171C6187FFF749B721EF2
+:100D3000E612E35FFF9430EEF38B6130DF5F0DC4AA
+:100D40007DDE19161DFF1A8863BA59DC471BBFCC1C
+:100D5000AFF83765BEECFC41ABA0CCD76D6471AC8D
+:100D6000792C4F62C98134C4BBE986F0E318DF7C7B
+:100D70008317953897C784EDB3587D8275118F27F7
+:100D8000DF518EFE319C0FB7870B5A6DDF627D8479
+:100D9000C5B5B4EBABDDCFC78DD336BB585E48725B
+:100DA0007118EDC0A3EF3C0B991803F86EDEEFD479
+:100DB000459F5B19D06715FCBE09F09BAECFBC8A7E
+:100DC0009513E175227EF5A822B755FC3EBA2A2F6D
+:100DD00005F0ED215353A88FC2CFC3A710F3105ACB
+:100DE00056F241E40FACC88778052E4491835B3EF0
+:100DF000B0A27DD6AE6F7906CED9C96D02D946DFD5
+:100E00003B929AFC6DB42CE9AD9847777FD28CADBC
+:100E1000608786A882CBD1F2E74947B6829E404CD4
+:100E200029444FC791AB94F60693D84EF58BA79201
+:100E30006DC85F5AEF2228BF334990E32840DC2376
+:100E400073991F7CD16E0EF3E729C583DEE7CE8B45
+:100E5000AF8F168C64FCFB8F905045D7EBAE8EFFA6
+:100E60009D7BA4EAF7137CA128BBF461CE2D29F960
+:100E7000E404F265F5A47F36F265AAC7FF9ACA8337
+:100E8000A1FC2BE8FF3EF6A0EF9978E792D4E75D4E
+:100E9000D5F1FD0A1394715D5D9C5F6F43FAD56DCA
+:100EA0008DA15F25AE6BCD70530903F17C16B7CDD4
+:100EB00027EAF9940D10171952C1E668F38408E87F
+:100EC00017595DD7135F1AD0D3C44C906F4BE6C54A
+:100ED000DAB959B5ABB2D10F597BDF0C90DF1BF4F7
+:100EE00096555C0A3C63FD871B34FEC3AFE30B5988
+:100EF00009E9664216F8633644E2C1883FED73455E
+:100F00003FCFE12A48749E4346BBD4E7033DA8D2B5
+:100F1000E4EE710FA61F52E1CE8275BDA8EE9B4292
+:100F2000CFCD0A6A72FB39B44B07F343059E8DC3DC
+:100F3000109EE6AEFBD16E4A2E657EF7E4FA5A1F8C
+:100F4000F09F64CA7FC08E33185A38DCFF89CC6E9C
+:100F50005BC2B1F2924A5194E9F7069B923F7D033E
+:100F6000ADB7039C7CBE68BFC335BA7B2AA3F3B47C
+:100F70004542DB031F9EC5C69B6E5ACEF2C47D540C
+:100F800047CA8EC0B14A81637E45123B6771AF0983
+:100F9000FD719BCD5D385F9DC4ECECDA4E33F2BB46
+:100FA000A1BC0BE352BD7A861FB2D584F4EAEE7D74
+:100FB0001FF305875E9D25F1CE28FC59CAEA55BC72
+:100FC000209A3C138341EA037F239D881BF2949669
+:100FD00070525F15AE4B0CCB6E58B7C2974B9298C0
+:100FE0001CA1E66616832B8B3B6AF68BE20D8B0306
+:100FF0008CB1303F17F149A87769D63B186FF6BA24
+:1010000080DFF60EE0CD1E573C7EBBC62EF5F544C4
+:10101000E30B9156821FF8111D0977C6C31F77ACE9
+:101020009DAFCD9BD4DAFB4DADD55EC5FE904DB8DE
+:101030009F06B43F9A96557A99FDE16A037F59F36A
+:10104000722AA9689BEAFD9C09FA6B9E6543FBBB6B
+:1010500079CF4ECCA7689A46DC308D5AC59FADAE8D
+:10106000F3A89EC549A9CC0A403E47B73DF4349C3D
+:1010700083EDAE57F3BA589E93BC8753F2BAD43C73
+:10108000C0F011F0D7767312FA6D07CED3D2FD6798
+:10109000F95C979717682DF63AC112FF69C17FFC7A
+:1010A0002629FD32F2AAE582755F9D579D742BD4E7
+:1010B0009B602F947A4003AA2FAB658F59827CAE38
+:1010C00048BD40ED4ED31E8EB597D7DC3245C07378
+:1010D000704AF9F327E1BCEB1A3389192F7A7E8223
+:1010E000A67F302D2D92FAFD1F664EC9C73C48657C
+:1010F000FE154F7A86D1FEF4B1FD21CA28EDA1A0DC
+:101100008EF7C2E863DD8F0E8BE8ED548FFF6CE441
+:10111000F888FEFEF0E1E95D63E958C9E26778EE20
+:1011200050D5C39B1D2CCF5A8BE77F53E414B58752
+:10113000A7826AFDF0ACC55EE877200F72FF5C0FF6
+:10114000D8C16A1E64F3722F9E3FA47ABFCE057980
+:10115000D57F3C73E220013BF314FA039A2F08CCAD
+:101160004F4EED078EE28B69FF5AC41FB243EF0763
+:10117000D74EB75D26808FDD07B8F1805F84B4E479
+:10118000DC42617F9BCB9384FD25C83FC873313F10
+:1011900077B3AB6A6321C0FA398E803EDEE9FA1478
+:1011A000ED8AA6BD53C6479F97ADDFB38E9DBBDCCE
+:1011B000A18FBBEE3C17CB776CDAFB2AC67B4EF9CE
+:1011C00039A4B985827F35D89B0B17EAC0B2226556
+:1011D000FEB998374D661908CCDFACD821CD3B6EEF
+:1011E00092E1FC6E33FD8F9200D9E49D8FFAF6A652
+:1011F00059260BE40934BB6A1723BF13933C60CA1A
+:1012000069E739900FB92C09F3AA3AF7E8A7819D4D
+:10121000544EE9E26716E0ABEF39B702FF4C1BC74B
+:10122000B78B90771A5FFF2E1AC5E45007E795FF3A
+:10123000B90CE338243ABF7DC41E667F4D74196231
+:10124000FD932E66175E2BF75703AEBD218492C126
+:101250001E6E269E4FC0EF45BC1609E3582480FE43
+:1012600040C78312DA4D2647E891B1507FAD8076B2
+:1012700093EA4738BB3713F5B1975DBEEFC23E9690
+:10128000F3A127FF19E0F688A0C4C3185FC9B9C944
+:10129000320EEC2BBD83E93366AACFC0B9A1EB5661
+:1012A0001FFF6535F0568717F50842851CDCEF50A7
+:1012B0006DE2583C48A33713D13D19DA4F55FCD2A3
+:1012C0000574B74E9810353B2EA6813FC32103BC51
+:1012D000DFA10B48A3F55388A783ED0BDBBFF50611
+:1012E000A6AFAFD799505F57F5E164473FDA898DD4
+:1012F000010EC76974BD82E7471629E71406CE0BB5
+:1013000008213C3F51EB4A56E2B01D0C3F493FFAE1
+:10131000C3C88B6C1FA8E689E72A54B8ABE70CD486
+:10132000FE0C4A7CB751F1E75280317A74A9F1DDA5
+:1013300015CA533D07C2C62582541EED775C5F4334
+:10134000483FCE4BB2C17C1FC9F0DEE7A2DF1FA52C
+:10135000780C78767455B29F708047FD1E88D3C88C
+:10136000A52CFEA2C5A7475C9C72CE2C3C15F3F0C1
+:10137000F6263867B627F69C19E50F8BDFA6E394AF
+:10138000951D76037EAFB12BEDAF2778BE407BCEA7
+:10139000AC4BD987FF73E7CCDC9CA7873EB7BAEC90
+:1013A000B1E7CCDC6CBFD43C19EDF9B2B3D94181C3
+:1013B0009D07093DBD0DE5A511EDC2D73FEEEB0040
+:1013C0003FF3B952831BCED564DCF64E07E62B7192
+:1013D000420BC44FB5FAC0EF9CD53F01FA5977CB09
+:1013E0006E37E68F6BF481447E008CED46F9890EF2
+:1013F000B8AEAC1FC0DCF5B90DF0ED34177E1CF2B1
+:101400009AE5037CDCBCE60F5C89E2629E59D1FA66
+:1014100069879AFF674F8AC987ED4890FF9748EF21
+:101420001712E6FD5D8FFA5BC740DEDF34557F8B18
+:10143000CD6B1693BED25E56C79F1672C6E4117C62
+:1014400072C9EB54EC9804EB4B64B75D6E5E841686
+:101450000E1D09E4E85F5D03F13F4D5E8447843C67
+:10146000820EC823A04F812332FACF760EE44504C2
+:10147000D15FFCEA48F47B1913E645B0FC3EE1C0BD
+:101480004809BE7B58EFF5803D23EFD42B72C0FF97
+:101490003CF84D3A0E64A39F8DB84225C01F05FB52
+:1014A000D42CD0AB3A14FC6CB8F4BC88B4A2387914
+:1014B000115BFDE31ECF65F6737F32D5CBB61226E6
+:1014C000A7E4FDCCAF49E78D7EBDF063C3515FE576
+:1014D000669A701DC7DE30F618510F77639E436D14
+:1014E000162F827CE9AE293F01F2EB18555C818E04
+:1014F000EBEE5E8EF66BA2FDA95B151B7756DF5FE8
+:10150000EA3E8D2B62FB7414EC7B14B432FA8B1719
+:10151000AEE20E62FEB626EE5D56441439119BC74C
+:1015200070DE5C89F1D8FB9EA8C138EC7CD282CFFA
+:1015300085A44B89CBB2788BB44A403921EDE0FCCD
+:10154000929391890E6D7B5187F7F550F1B609445E
+:10155000A24CA9E66AFA9AD371A0A74A1DB49C4985
+:10156000D7B55A90B3E8775BDF4F46FFEBC30E4920
+:101570003957C3EC2FF9510EF53FDA2FDACF720746
+:10158000C51BDACFCD452C2ED050C4FCC91445FC68
+:10159000381FE5D9A1E47DA8E3B5115D109E3A8E10
+:1015A0003D1F168569F1F43BB5BF0E7D8B09E22D19
+:1015B000E1E13A8C679E377866613C30B59080BD3A
+:1015C000D8616D59358DD5230F3D6F0E7BB1FE3B34
+:1015D00002331488940AF3BD41D90FEDBECEEB8AD5
+:1015E0002D6BF313B4F77ED411DFC8ECBCC1F760E8
+:1015F000DC50C4E4E1F94EA7B22F6E8C9777E8A5D2
+:10160000DF38413EAE16500EB70D6370D30D67CF75
+:101610005CFBE4592887ED543FC5F9B2F9E77EC772
+:10162000C101FD75D8197E7DDB796BE7BBB4A810CD
+:10163000F7AD038C063A5EC76ACECFE0C5E67DA95A
+:10164000FEEA278AAEAC9C3AC6B9B70701CF2CFE9A
+:101650001F81DFAFAECD28023F3BCD29F4BF9A47B3
+:101660007EB669612A968FAE2A403FD000DD9E5C2F
+:10167000B918EE33B9D47C8AE714BC7857E387AB4A
+:10168000ADE0DE837EB47007841254F9439B56DFCD
+:10169000543C15F863938E4899A00FACD2E4B3681C
+:1016A000E8798AE47BA508EC0F437F1FE353A1424E
+:1016B00001F56FB31BE0B64E776CE7CF015F769A0A
+:1016C000313FB26979783BF82B3325DF5E68776666
+:1016D000D9E1A99C84DDA19E74EEC048BC1FA7B6C9
+:1016E00043738FC7A3B1793464552ACBFBE88E7D51
+:1016F0000FF737C4B41B945FC3F4D6F5065F11D857
+:101700001793AE6379891FD7EB08E0C5C766863F9C
+:10171000F2635645CEB80BA3F5DADF6BF1E3313354
+:10172000E2479D72EE4DBB1F8D801F74DF1A14FCC3
+:10173000F8F8D5AB0B013FCEECBCBA10F063BDBEE0
+:10174000CB03F4B53BDF7718E0717C8AB74FC7F85D
+:1017500052E1E5E0ED4757186F2F55BF328D4A141F
+:101760006F91EE888EB7F4EA999F4C36C79E1BEBBB
+:10177000BD4CBF6A62FF58517EAC7FCC951F57BFEE
+:101780003299BF52BFBAFC75103C37A8C6617AAD1A
+:10179000E1C7B747C16B8999E5A32C291245B91454
+:1017A000D6579B87E710FF6872F77057749D317E9C
+:1017B000C037BEC85BD905F3F030BFE51B82D477D4
+:1017C0000D1DF70DC2FC96DA75DFA8C46154BB5B32
+:1017D000B503B5E3978C627AE6A4519E52B00B260E
+:1017E0007D7111FD0827E11E2C3AAEC9FF33B4E725
+:1017F000C87E4EC4738C128B8336ED9DF72CF85D3A
+:10180000EBFD4AFC721787F67AFD739F60FDD93DA8
+:1018100075586FD9CF05210EDA3C4C87725BCD7FAE
+:1018200050FD3FCDFB4BD1EFA3FA7FE83CC6805D76
+:1018300099EC081B906F817D49DB35092CBEDBE4F8
+:10184000206E1958ED9E58BF899A1FB5C96B407A12
+:10185000DFB49FF3833D9E61F03987213C87892760
+:1018600092237C63FA28CF4AC87352F3EEE0FE9FBE
+:1018700051E3D10F9A83E710F4EA7D2FB1F7F324F7
+:10188000C2E70509E986CC89C6B790260E11BA626F
+:1018900079CCB351DFFE6FE2457DDBA7C1B75002C3
+:1018A000F9D23C4ACD63BE15F57DB5FDE0FC7E3F27
+:1018B000CBEF1FC8CF6379FC0DD309E9B4B332DC99
+:1018C000EBD408F73AB999BC0F6AE47D7419F2E1D8
+:1018D00082517CBE41E8C77302EA3D4E901F17FD5E
+:1018E0007D139CDBC963797231FD28FC3F93BF07F0
+:1018F000E35571E2C47744DB4B8754BBB0543D17CA
+:101900001636803F6A499B230C718F4356E5BCBA5B
+:1019100092AFBCC41C3E06FE9A25CF67E279A201B5
+:101920007BE425A3E2EF6774DAC0FE24CD0B8FA21F
+:101930005FA219EEA5E022FB363DA11DF98B7C8844
+:101940001F1D1AB023DFC987F363AA5C687033FEDA
+:10195000D6B08763E70803B1E7C85E1E7565E58406
+:10196000FA5DA2F6874625B24BBF0ECE0CDF0F25DF
+:101970003A7FA7F075158E5ABCBF5CF8A9F503F045
+:10198000A37C08E583067E5ABF9FEABF231D22FA87
+:10199000F7A80E1580FC53D57F77A9F2FB43054EBF
+:1019A0007F6FF94D4627E243DF6E7F12F1A3CBDD57
+:1019B0009741F21BF6A724B1FCCEAFF83765DEDA0B
+:1019C000BC0965DE9ABC8943FAF00C760F0B858F53
+:1019D0007370DE4442FCFB9ABC896FB04E4DDEC48E
+:1019E00057AF539B37F1CC81A76C105A84F38BE02F
+:1019F00027E9DDA6C77C81A9BCC5C3F2D97896FFCB
+:101A00004A3C785F6FB3C98CFE106DBE1FE5542B46
+:101A10005B401FAEA0760A9C97DAD28E7A4463367A
+:101A20008FBE55C86F14A538F9A4424D4A501A9C70
+:101A3000D706E70BF05E8BCBCC6BBB66B4D581F2DF
+:101A40005722CE6F985F5A3D1AFD0F5F9DD7F65C07
+:101A500001C3FF372D9FA545DFA75B552C13885386
+:101A6000253A0751339A1BC85BC6F38A824CA2E51C
+:101A700071A276B34733FBEC4D43F8FD00E881B427
+:101A80001B88D36619A8F55F16B9AFE13697F7F64C
+:101A9000D1E9A83FE1FE9EDDFB078C4F3C934D440E
+:101AA0003897F08C5EC67D96D309E2B59A7FA18EF9
+:101AB000734E89A35D2AFF593CFAEF2B171EFFBF17
+:101AC000CE7706E569317AFC06FC06E96F809FE86F
+:101AD00059FC4ABDAFE56BE5DC95E6339AFC9244D0
+:101AE000EB6A065AA4F8F3CA68EF8B8C8E3CE817B1
+:101AF000BD5CF9975C46F52180C72EA304A466520D
+:101B0000EE65218F66AB7E5C769FE79AE1A82F7F1A
+:101B10006C66F355EF9B51D7F3B6163FBFA5DDFDBD
+:101B200078BEF7E7405FC72B3D780EFC612BD3DB17
+:101B3000C2CFB33C7DEDFD29946ED87D32CABDE0A5
+:101B4000DA7B20FE38FA1F23BF2F8CFEDFD1AFFED9
+:101B500051F2FBF2D7116B7F1FB2B23CC888FDFD7A
+:101B6000BFB6AECB92D76A5E747955BF129FE008BC
+:101B7000C427D4719AFBD9B9A2A1CA7916F5FD8DF3
+:101B80008A5E7867B167189C9F292B0B3E0DE76B27
+:101B90009A880D7FD7A02970FF8E5F39D8F9662CFF
+:101BA000BB587C95782D785E3FADD057588CF41B90
+:101BB0005A09F439C241CA21CED1E99A49EA2C988E
+:101BC00037310AEA472C0F3DFDAB32CC1B6B017A53
+:101BD00055F3A6CB2F7EB6725A19CE17FDD50E63DC
+:101BE000ECBD333716337B507D4E53E64FB73D1B6C
+:101BF000E67366213BEFDBECF088E0F756E3F4C9CF
+:101C0000523FE63934ED62465139D88A50FFC03030
+:101C1000A4AFA65D95A510BF25017329DE07FE2799
+:101C2000760FFF996543D03FFAB2CB5709F3B696CA
+:101C3000F9AF07BB7F041D07E2BC67765E5FEA8BE6
+:101C4000C33733F95419E2E0993C093C2946F816A8
+:101C5000B5F767A37F7B6518FD6EA5C5EC7DB383E3
+:101C6000C9F5E6FD35649E2552B63862CF8B4D1A14
+:101C700035A514E6515A2C2879A42C6FD549D530B6
+:101C8000F0736AF1C9A9E4ADD62879D9443645F292
+:101C9000B173BF3E6F559D9F5A56F356932F30BF79
+:101CA00043AE68C03C17EB2AC657C97282718E6B6F
+:101CB000C3FDD529144EF9DDC16B014E290076BC58
+:101CC0006F39F4C858FADE91265C0BFE9BA75BC700
+:101CD000F582FE2BACEEFF0E6C89D42556814B3479
+:101CE000ADD0DB887824B4B8802F55FD4ECFCE55CB
+:101CF000AD4E46BDB23BA701CF559D3D6C8C7B2FB1
+:101D000085FA94C98A2C8893E4AEFA77CC63B0EE56
+:101D1000E2E29EBF7BB7D8A29CBB5A91057117EB3C
+:101D2000AA7EB982F69FFB184714333A9BCB027FF9
+:101D3000B6A003F95AB787DDCF58D765AF32A1BC3B
+:101D400061FE2572AD03E588B0FA461DF009A18D4C
+:101D50006AB1749D6F17B3787A41B7A80339F5AFAC
+:101D60005FF271E35E4F1447CEE700B81A8DE1BE13
+:101D70002C67242F493D97A3FAA706E4CFAEB9E814
+:101D80009FBAFC3CF4F0ED98E7F86506C683A6DB45
+:101D9000983D420591723F516CFB41F713297A8BB4
+:101DA0006A176BE9409BD79D5F3104E982F2D1C08D
+:101DB000263186EFC5CDEF6E1598DE4DD7615802FE
+:101DC000F3A8CC72833FF152F3E9B5F6F4809EA3F9
+:101DD000E825EABCBF69FEB95ADF0079E771FC1F4C
+:101DE000AA5ED3A19E33FF92DD1F3742B1278E76C4
+:101DF000FEBF12764FA79AE7E267E754F4947F227A
+:101E0000FE84AE93010F76D9754DC5180F6BC27E57
+:101E100056B3DFFF18B12A6F4545193C45C25178CA
+:101E20001FDDB76804C69B295D14C4A18BC5C5EC32
+:101E3000FE06617532E2B1B09660D6A660CF403C36
+:101E400016D6317C5DA4D0BD9A67A7C62DEF2CF6BF
+:101E50001D2B4E8FBAA7A53589DDD3A2E4AB5B5B02
+:101E60000FBF04F79F3CADC4AD7BDF183D13E38982
+:101E7000AB050EECC3F3F6B923C07F7756E1DF560E
+:101E8000A19F8896687AEDC5F38EB907D8392D41A0
+:101E9000C9AB15563BB6027E9A9D3E3CD7F99D8E46
+:101EA000208F795BE2F127A7496077840D906777EF
+:101EB000AA4D08AFB0A3FE14E327D3FABD8810C023
+:101EC0003C22DD982BAB47A9DF256A2F8D49A83F1F
+:101ED0007DABF322E46BFC53DF16AF13F9A72E7F23
+:101EE0001DDA7322CC3E216FB07CAC38EB8AF15FF7
+:101EF0005EF175A97E4B6D7EDD203A66FE0FD51E24
+:101F000052E325C423C7E4BFF7EAC520E83D904F5C
+:101F1000FCAA1BF4EA1F9BA3F3DFAE1FA38BBDB784
+:101F200092F8CD701F429D723E9A08EE5510B7BDD3
+:101F30009FB776817DD70EE71240BF04F87251E754
+:101F4000333EB0629E46ABC0CE6F10999DFF5832B3
+:101F5000AFE5C7D07E495BA608F097AB5A7E8AE70B
+:101F60003B74C4DB4E9F9F2BBF87A3CE473DAF90F2
+:101F7000487E0E3AAFF035E72DB2139CB758A0E07B
+:101F8000BDEB2E82E72DC82ACF569857779B40206D
+:101F90003E9D3A8D95470826FC7D2633E47DA7E1DA
+:101FA000F958CCCF0E5378429EB919F2BED3E03C1B
+:101FB0000CBBA7939B390DF12F95C207F482763D98
+:101FC000BB9753BEC582F8543D8DC55B53BD06E437
+:101FD0003FE7881BCF09C8707F9F03F06C05E2675D
+:101FE000D89A81F1E2D47CA6479ABD069DC9897929
+:101FF000DD88AF614ECDEB667CAF7BAE84F9F60336
+:10200000F774CE23B83FAB0BA666C3EF920CB9C9E9
+:10201000C0417C499533550A7E746F55DA37B2F664
+:10202000708F27CC8F2C61ED07EEF1FC3EAB6F1566
+:102030004278AF14D561947B2459FD92D919483F59
+:10204000BC722E97DCA69C2BE0D83D644B660F61DA
+:10205000F536C607C9DD498A3C57DADF9BEA57E205
+:1020600005EC7C40BD4EB9EFA08B44C79F553AD3D9
+:10207000FE3E4784CED8F9922722E704909EDBAF3C
+:1020800017310F52BD87B4CA6260E7CE4CB17435C8
+:10209000694C2AC3FB0AB709C65DEBF4FC644C5CCF
+:1020A0003F8D7F6E345F19A2F295BB0D1ABB2C9346
+:1020B000C1D5167E9A9D4F335E965D96380EFA7C9A
+:1020C000766C1C744776741C54DDDFAA8506E42BFD
+:1020D000DD76E92DC897DA44410BF73A6AD7BD6936
+:1020E000E07E76BF19F452AD3D7828415ED4E931E7
+:1020F0004C3F7427F0439C1E93C8CF9520AE5C6A7A
+:10210000FC5F8A8F33FEDB9BE03CE200BC54BDC920
+:10211000A48D7BC897E5F7E935FD10F9A0A75D20F0
+:10212000E6EB6859737E8EF241E48BF20AA3D8EE97
+:10213000003EFA43E48BADD4723546F1456A8E5EBB
+:102140000DFCB8F74117FEDED55B0FBAF179CECCA6
+:1021500005F8B1F00CCF018DE993970DDF83FBCD2E
+:10216000CF59C33970BF794A207516DC577E2E3D92
+:102170007C04CAB69FDEC1CA05E1A7E1BEF3FC9F9D
+:10218000FEF27B58061A1B42975B12FC9E5C0CF712
+:10219000EE8756F6837E5FA63977A0B97F19CEC742
+:1021A000C27A322D068C53672AE792C964C53F0470
+:1021B00099694077D9A598576821D2AE7EA81FC6E5
+:1021C000E42EAD6F83FB7DDB0B9C2C6E4E181F2025
+:1021D000C394BC131292C11FD5EEB463FB01FD6E14
+:1021E0009751C95B63E3BFF72ABB37493D6F4D8801
+:1021F000381CEC468B4462CAEA7DE6441087C3FD76
+:10220000C3ED6ABC5A291FC8F48D2A89B25FDE9BD0
+:10221000727F31ACF3E3DD0FE4833EF55DE577E2F9
+:10222000B478F5D7B14C8EAC48FEDB1CE0E3EFF39D
+:102230003637F80F9666FACAA0BF798EB6F1768A5D
+:102240003F93C54AFC3DAA89F26C0EF88AFD6636BA
+:102250003FFB642F37AF38F23B55E93E01FDF4C434
+:10226000D7CD83BE9D7EDC2B027C1A4CE11C81F60F
+:10227000F381C33709FA3D3FF7C3FB308F70C87B4A
+:1022800047E05ED4F7F45DD536C027A7720F36114C
+:10229000F01C50DFD0113DCAEF6DB1F340059C1228
+:1022A000870D4E06B9700361780B65A8BF51B987D9
+:1022B0006EAAC8EE8D9D5AE6C4DF4F9C41C202E073
+:1022C000C3D4F7BD3602F471B3AF2CDE3D1BEA93E5
+:1022D00064E9A568FAB95E8A2A13C8B7882DFF9306
+:1022E0003BB6FCCF155F8E8C2ED7089E3B60DDAFD2
+:1022F000734CFEC81398FC11496005C8C7175AC42F
+:102300007118577770329447BF3604F3A84816CB3C
+:10231000BF1865CBF53338E46D867585A99CEF71E0
+:10232000C0EFB0B1FBC532DE376C85FB2088246D71
+:10233000063ADCAD77619E6986A5F6676DA8CF5831
+:102340004901F2296933E2B5D524C1EF961CB4B234
+:10235000FC89F6B53A8C37713693CE43BFE37B04E4
+:1023600026FFAD0BABA19E2FA71B426575AF9DFD50
+:10237000AE5BFB78A25F510AFBE67E1FF522AB093C
+:10238000CF274CB6B9EE807ADE66C0FB2B0E5ACB57
+:102390007DCA7804FA7FCEBA10DB038FD653FAEDEC
+:1023A0003533FF3A4FEDE3156C7CFCFD46FE1EA273
+:1023B0008C6F220628D7123C6FD06B17D97CEFD5D3
+:1023C000613C04EAAFC3F999B05EBDCF3272BEB7CB
+:1023D00052C0DF21E088121F6BC3F2530A1F6CD773
+:1023E0008B07014FE58F0881FD986CBB8074C0EBB3
+:1023F0006C6EBC1FC843F21D1984F92CE8F77C866B
+:102400001884FC7BFE1E1BDACDA0F940FD50F813AA
+:10241000E95AF09072C53583E3798E021E8FE08809
+:1024200017F6E354492EF2A36775EF6DC0FC0A8BD3
+:10243000D7E8A6E3186E23B8BFEEE4F8E77AF7967C
+:10244000303A1DBC7FE55990C7C1D92A2478B65BC4
+:102450002B2438A7D46B776779A3CA71F6C50F7898
+:1024600013D91753505702FBE19640BFF8FAFE68A4
+:10247000BD05D623E1BCF8216E09ECD07C1BED87AD
+:10248000F27D775AFC759C52D61150EE2DD4D6FFB2
+:10249000BE4477A5D7A9C1BF6FB9CE8CD8755EC130
+:1024A0007986B82B304F3E87CECF12991FFD13EFA0
+:1024B00051BBC1A243FCBA41BD1FCA157B4E447B30
+:1024C0002E8490E51B81CF7C57C977AD4AFE17F467
+:1024D000E35F4FF57C906B7DC93FCC877CD3A92906
+:1024E0006D1D8C385ACECC037E6CE290EFDC4882B6
+:1024F0002BE1FDB94ADF33F63CE4FB7F2B190FF7E4
+:10250000E9FA46A6D2F2C7FAAEFCC54EE48B1781B3
+:102510002F5A4818E9EE06F8BD46A0BBE9FE0E2882
+:10252000D3315AF09E304A8740B72A1D0E9E3FA5F0
+:102530004BFAFDD0161B9EDFDA428278002F8B7497
+:1025400071CCDFD282728B48C323EBA4443BD5D439
+:1025500082EBF8799B8CF2E1BBF6270528DF5CEA79
+:10256000738CA5F39A35F613FCBD0792357724D802
+:102570009D74BEE963FF81F31D7CAEFEABF3C8FE24
+:102580005EF6E884B1B1F6A823E96F9807277136A3
+:1025900037A1FAE3807DAA37615E42E41C72B80E6F
+:1025A000CF3B73295E9067EA39642DDF9D741DE38C
+:1025B000BB1F2FB6B957E03D923BD02E6DBED9A2BE
+:1025C0009E5346FDAB79A14E39A7CCA15C6922266A
+:1025D000BC2769E0F72CE93F2E23F2BB34FBE0BCBB
+:1025E00072D9579D5796F03CB4BC9CC5E907ECBB2B
+:1025F0004691D9AFEAEF9BDC9BABFE0E05D3531699
+:10260000934BB26FE39C6346BD91A4E814FB95E93C
+:102610000BDD13245126185F657AF86C03D6AF4F93
+:10262000F2E3EF05D5F15D88240D63EDCAFD0F7E61
+:1026300033FEAE98C15D087C428DB3EECEF7358F88
+:10264000A5FB34AFD893C3D1A5D41958FC94D2C1FB
+:10265000E67EDA6A1A69790E7E6FEE7AD2F25B5DF7
+:102660001ED2C1BDF0FDACD19FB0DFA18BD0C17D2A
+:10267000400726C2FC01372871A2D73FDEDE01FBEE
+:102680007E8E23EC3C9A4B7B1ECDFBC3B12C9EA5CA
+:10269000FC9E542CDF899AC7713D9B8783E7711E8E
+:1026A0002BE3CD63101D123F8E4FF7B705CFCB6BD9
+:1026B000F0483B1F6EFFFD789E6FF3ED44E42780EA
+:1026C0001CEF37033C870146E4C13A7DEB609DD99E
+:1026D0009062099354ECEA41F3E62DB8AFB7CE1EF1
+:1026E000C8D399915D0E712236EE53C94DEBC0EF00
+:1026F000D17CBB1EF97BCDFE31A8A7F5C94611924E
+:1027000020C964965FE3A6FF8379CD229E2976DAFD
+:10271000CF4D620DDE0B77F3746D5E8EFC500B6D4A
+:102720007F8B92E773EBCDFAA3D1FAE639FDA37A5A
+:1027300080835C6769E127427F42A4BD73305C06F9
+:10274000DD4BD5C1F813A17A0EF4DF5E1140FE9483
+:10275000884FED1D3B709FDCC86F98EF73702CE2C3
+:10276000ED57E7FB6C57EEB17A4B1FC6FB51DF4EBE
+:102770005FB079315DE7C81F15E3EF1B4FC9A87F34
+:102780006E2D2DFF78D3282CBF9D71FBD2F7A0FEB4
+:10279000E9422C4FD67D3207E8C1553EFB06F85D75
+:1027A000E8B7CCAC9FAC245F770DFD2EAB24771C33
+:1027B0005C6033D910C6EF6E1CDB7815F8632627F2
+:1027C000B1F2A1D23F8CC372AE521EF7FA2828BFD5
+:1027D000C57D32271E5F1CEDE2824554DE4E4E65FC
+:1027E000DF4F1FF7FC10B0E32757B1F26877E5EA37
+:1027F0003CA8D77D3A279EBE7456E1AB93BE38D72E
+:1028000091E680B030FBBDE2D73C1FE2EFCB78A968
+:10281000BC85FB06BC152C0EE7F5940AF07B6655CB
+:102820001E56AEB6B465031F9CE1339441DC55B42B
+:10283000383B44DA2EA5A2723CEC7B3555B721CE4D
+:1028400049E9EB53A4AFAB3FC9B1A15EAAD297A8A7
+:10285000477A4F7CAFE4E76CDF62E981F6F705CA9F
+:10286000CF6B62E5E7207AD5E0E1FF008B7F42C5C0
+:1028700000800000000000001F8B08000000000026
+:10288000000BED7D0B785445D2769F3973CB7D429A
+:102890004248088409F74BC01912205C1D02645994
+:1028A000050C171514E1041002B98DE0EEA2EB9AA5
+:1028B0000901441777E38ACA2AE88080A0C80E0A73
+:1028C000C86A644764237EBA1AAFEBED631345E52B
+:1028D0004E0CA2B89FFFFAD75B7D0E99338405BFDB
+:1028E000CBF3ECF7FC3F3E3E9D3ADDE77475557542
+:1028F00055757575CF55CE4EE15FE60921FC891EF1
+:10290000473E95BD6D271A7B0BFEF74357592A6941
+:10291000427410FABF9521457413A2930870B95EF2
+:10292000D42A421562B2558BF70C12C26E6970E35D
+:102930007917C5D3D745CF45BEC759D41F2F764A7F
+:10294000FEA29F4053F1C395429CB67D922D5285C5
+:1029500008D00375383DF489EEA9D48F82A66ED9CC
+:102960009595E04CA35FA1B85C69E857D62B757FBD
+:10297000E5F7D739E8FD0CEEBF93A73DF093F8AC2F
+:1029800057FC5CBA84F6B8A0F155A40BD73D5EBCE9
+:10299000DCB8324CEFA5D388EFF110B8D73CDE9A03
+:1029A0007CCFA264F5427C2DCEE65961FACE3491FB
+:1029B000E851E9FDF79616B5F712B2D709BF0DE356
+:1029C0007D282E31904CCF2BE724041DF47C670723
+:1029D0006D00E8A15A022F36127CB3F0D9D16EB245
+:1029E000D577059EC70BF9BD0AFADE3D289D448FB9
+:1029F0003C898723A30D7A44E1193DFE56BE346419
+:102A0000A0CC107E86D3856795DAC67884D57F778B
+:102A100023BDFF0B35A1F61E2A1FB2FA2C1BA8FFFF
+:102A2000C0EBB6E06685C72380CFD24F12363AB2EC
+:102A3000A9B40A8685C7C1F54B6E26FCE9BD254AB7
+:102A4000962740CF6B12FC8FE17BCDD556B1311567
+:102A5000DFF76D00FC7A757781F1458F27BDF6A70A
+:102A6000424BA17AC5FF04DA05AA1DAECDD4EEDB38
+:102A7000D87FCCDDC874482AB265111C3369432362
+:102A8000C18ADDE9528869E973D2595ED7DE427C9A
+:102A900020FE050A42DDE603EF475551E38AA40311
+:102AA0006192DD2A9FEB3D44B4F69063831E0105DD
+:102AB0007269B728B38BE28926F877656BB9DE6354
+:102AC0001182F8D43DBFA30FE35EE2151EC80FD1FB
+:102AD0004101DDC55E45A703C913EA15973FE0BA7A
+:102AE000904F4B1BB36F45FD7E0BE14B6501F12B06
+:102AF00005EFC7A9F27DC5D32199FA2F4812FE1020
+:102B0000954B62DCB746D275B8C532BB28477ECF3D
+:102B100049F49BADCF0603CF396B55A1E50A31C609
+:102B200039F7B1C3B9C0775887A28488FA7BFAE431
+:102B3000CCA1F75FB689E9F8BE677FEF9CE21C1E67
+:102B4000872F94C37C5C1102FEA3D33D010FF06B71
+:102B50005EE1017EAA68DEEC011E014716F089C91C
+:102B6000F40404F0AC15B7E545E01F43F803BF3BA0
+:102B7000C6F922C76DE07D313CA3E97D313C2139A6
+:102B8000CEC154AFCBCD1C675C933200A51A7690B2
+:102B9000888A55D4AF33525F45C9B90830DF272E34
+:102BA0001D537498E42DD54E8F20A7B725043712F6
+:102BB000FE136F1BCDCF9529E7589EDBD17C745057
+:102BC0003966BC5B69243CDAE5BD6515FD21A78447
+:102BD00017F0B1360E9A4CF43DD6557B12FAC6C0AA
+:102BE000FF2F839EF06A547FC8224A4239178E6FA6
+:102BF000B72E4F2ED16887DC5538E3C3EA800BE54A
+:102C0000E562F8BFD8A1E839E88D934AC36054560D
+:102C1000F676F17321B46C7C2FD9953D3A197AE29E
+:102C20007BEA6F30F414FDA379D0B7BBF627BC77ED
+:102C3000BD281A67A5F1B61BAFD9341AD738359E0F
+:102C4000E773CB7685F5D5585F8C0574A93C680B86
+:102C500006095EFCAACA745ABC5E0D62D2B608CFE1
+:102C60005ACCC39680C305B97C286EC06F4750F913
+:102C7000D97A9BC7817E03BEB77B53BFF3743EF501
+:102C80005A6B116E832FF47F9F60AC70F76E85FBDB
+:102C90006D6D6782FB873A9ADA5FB1B7ABA9DE1B2D
+:102CA000EE6BAACF3D38D0040F6A18666A3FE48302
+:102CB00002133CB4F12A53FBE147A698E091CD37CB
+:102CC00098DA5F796E8EA9BE34B1B07E298DB73E99
+:102CD0005D150AD9C9D1A2D4D4BE542DB30B62B1AB
+:102CE000A8B57D0A79F4D37FCC4F75A615743EBB89
+:102CF000571129A48F16AC95F5C67B2575F7AD84C1
+:102D00008D5B18343F2F15D65618FAF793856F1E32
+:102D100088E8AF576AB12599CABF7B1252212F624A
+:102D20008818F283CA7CF540DFB4BCAB7A1C42370A
+:102D3000A5042F7E5A09DE437CEC297A3C04BE119F
+:102D40009F45D00DBECAFA96756A3040FD7C5B5532
+:102D5000F2E6011BC10773D7422F2F20BD0CBDE542
+:102D60004837F333C66DE6675C6F333F133C667ECE
+:102D700026E59BF999EC33F33365BC999FED8BCC39
+:102D8000FCEC30DDCCCF0CCDCCCFCC12333F3BFBB9
+:102D9000CDFCECB2D4CCCFECC022537DB4FC765B3E
+:102DA000B5D854FF50DCBE2F34A2436A47D5E5A006
+:102DB000A9D7A3F676D3F7843AC1BE82E8559AA97B
+:102DC0000AD5D52A0701FA4FCE6B3FCFAFF92407BA
+:102DD0000F131FCE8AD5F599EE0BE5A162EF7D7634
+:102DE000CCCF1F2B0FC3BD663920B94BD2DAB06BE5
+:102DF0004669F099FC91D15ED20FD3BCDA582FE925
+:102E000093E9BDBECAB292DE1045C5BD60472EC76C
+:102E10004FB10EFE117ECAA410DBE38BFA29EECE71
+:102E2000ADFA8F9DBF80057AF9C3793696DF65715B
+:102E300003B6432E3FA8917279064D860A71830826
+:102E4000B11FF661EC239DD15F01115C198ACADACA
+:102E50009B80FF4CE04FF6EC26D168C3C7C98EDAE1
+:102E600051160B37977375FFEC66115E89C17C9222
+:102E7000AACD075D2A54AD4B1AE8D1A9218BFDD804
+:102E8000D75380F445E96AE8EB77F027B57BC45B5C
+:102E90005481EF8C71BA6F7DC00D3F80EC03F1451A
+:102EA0004C4861BC85B5A8FF94FE6D7D6719DB8B2E
+:102EB00017144D03BD03194E0FECAD480F3DA3D0C1
+:102EC000F8FAB6730FBC27B9B5FDAFBC867D21C734
+:102ED00086DA3FB92B96E9D5AFC3867618D78FED42
+:102EE000F76EAF6F39F036DA5F6ABC76BB67D1CF69
+:102EF000A8DF6645F8371212EFEA7CC974483F3103
+:102F0000534DF4D4806F71B3EADB131D6EEDA0FD59
+:102F10000EDF9F7EFD4F570256F6A7B817137EA708
+:102F20008B1B07035FA2FF83A82F7312FD6968271D
+:102F30003B6BBD9220144592FEF447FFA236F197F9
+:102F4000F81CD0E9FF6207ED31C8F57E4B439607C8
+:102F50007CB4360C663EBAE4B84EDA255D2E468760
+:102F600082B8CE3341FF790E8747257A1628F2BB07
+:102F7000879366CFAA24BC6FB614A5855513DE4F80
+:102F8000A3BFB2F8E22E19C0DBA6E3ED6CAFD3DD30
+:102F90009D13E99F45E35D83EFC31FFE15F997D9A4
+:102FA000781EDE06F839E1E2F58BC322ED7273B5C7
+:102FB00012DC48F56FEA745E6FA37698974ED1AE37
+:102FC0009AF0BB66E48A0D68F76BCDC9786F169EE0
+:102FD000BE6BB2C10FC1FA3EF32E2558930DBFCA86
+:102FE000C3723F4F1465EDA276AF79B57AE0FFB7B3
+:102FF000B87F0CCAB6F0341EF42E7D67CFB20E9E99
+:103000007B008DB83CF9EF4D9A03FD4F9928EDCE2A
+:10301000CD3ADDA689229EA7C6BA8926FCC90A6ACE
+:10302000379DFEE2F59870F7077E33007B5BE7F58E
+:103030004CD1C0E52CE1E2F5D4DBD51D7E761BB585
+:10304000996269CEB2AB98A7346FB399FEFF0EB9FF
+:10305000F966DC5B8714D0FD0ED263E0F79AF69731
+:1030600025C79315494F9AB79FEBF3360F53EBFCE7
+:10307000FC19DB5ECA9FD5D5E39FCD1F528C891901
+:10308000E4AFFF44AA42F1D09944914AE36CE8AA24
+:1030900006B19E1AA7DE61DD45E36C207FC2817117
+:1030A000FB8A3B9EA6FAF1646FEF91FA352140F05E
+:1030B000249F2AEE6139685CBE909EBF9E4FF5D476
+:1030C000FE956A919047F02B5E9BA786E470DC39F1
+:1030D000ED4012959348EF87A9F555E9F78D857F67
+:1030E00030BE13D991083B715577334C13A113F8B7
+:1030F00074B54EEF093966BB330976C768DF86DDE4
+:1031000021FDAA82BE710375FBD357F485FD79B901
+:103110006AAFF88CEC8B6187C608B9DEB8981DB22F
+:10312000DA0B5206B23FEBB6637ECCC1FA04F476FA
+:10313000691D2747CC97D2210AF3C94D86C742E3C0
+:103140007FF3A01A047DACBEF070D06FF18B0ACB78
+:10315000E9D503B5AC81C48753B6C6F9909B8611F7
+:10316000B94982FAFFB48A10E945F3B7CA297C3419
+:1031700017BEA872317CA42A9DCB63556E2E4F5486
+:10318000F5E6FA53551E86CB0716F5027E73567D7B
+:1031900065859FEF167EF68F96D07A17FC5A92B00F
+:1031A00058C236A70B4AF8AECEF5963882EF0A2AF7
+:1031B0001ED8C585BB822BE308AFD23A9F3D9EE067
+:1031C000259DDB8D8947FB071496FAF907FDF51855
+:1031D000EEA9773FBD6EA2681D6FF93985D7C9EF9B
+:1031E0000FF20D46FF5F56E5335E47AB7C8C97AF21
+:1031F000AEA93E85BE77BC6A3CC3770D2C1A81719F
+:10320000FBC457EC474CDCDE64859F31CEA7F8C089
+:10321000E7513E110C12BDD6DAA45D594B76057A02
+:103220006074FF29EB6F15D0FB5A21DEBFB6DDDCE1
+:1032300071F05727E517B3FF7AFDF782FD5743FE7C
+:103240002F358FDCA2E15426F5773220E9D3B2EB9B
+:103250001D865BAC441F1AF1BE5DA5A582FC83965A
+:10326000736FCBE7D48EFDD4DDB2DD629B6CB77893
+:10327000F7AFDBF9002BA25944ACB78E131F85239F
+:10328000027EFA17E95A847C1D6F17FAE623E8C913
+:103290007FB77836B29C6A9F3D0F3DBADCC57AE6AF
+:1032A000942DF4C5C3D0B39DC9AE72BD3F6E0AC99B
+:1032B00059855D682C7742EB07F878ACE0F800FAA6
+:1032C00073F792CF218F3D773CD4F597EED6FEB6BB
+:1032D0003CFDFB96E7DDA80FF2FCDFB6637DC74738
+:1032E000082ADBB92216787D76EF7399185F2F557F
+:1032F000F8559A67737FF3C7CC3F52FF4F906E41EA
+:103300001CE3059BE7D45EE0B39EF0A1EF3C716F38
+:10331000F940E8B779BF5BD817EF07065A98AE4F68
+:103320003DB793ED3FC998670CE9A9FE6B5E5A96CD
+:1033300041EDAF58D764E948A577935283B274FB47
+:10334000CEB7ABA9BF5C97C50F7F74C54037BF3FF1
+:1033500030B461A302BDFEFDE31D31CF72D67C55B2
+:10336000D0515CDC6F782AEB8396621E572D8F6BF1
+:1033700077DDD4776E14F04BC82301BEC5760FDB22
+:10338000291AB60DFCDED56D03DEDF6309B0FD0939
+:10339000CC917ECBC9A2C0EF31FE726A1F20B8DC8F
+:1033A000DBD0741BD597277715883B1C092E998194
+:1033B0007A9ADE2ED0A762D703851D093E3942785E
+:1033C00014EABF64F79942B66F9DC9F7C6F776D580
+:1033D000A4DD00FB96533048A5FA2235C4FD894A86
+:1033E000D95F65DD4EA7E0F5BC68A792224CAE1B05
+:1033F000FD7266047F2C8DBFC9B6D2F7DA937D04C7
+:10340000BE6BB30319FEF8567BFA9AB7680BEB2331
+:10341000D7FDC5F8CEE78417FCADCBB57F768B7FA3
+:1034200021E3932E5C81A1ADDFED6C092FC43848F8
+:10343000DA5D01FACE6657C30C6E47F06FB95F6D67
+:103440000FE65FA64A544F95F6BA06FDBAA6668106
+:103450005F97DBFF4371FF60BFABD292E871E4B5C9
+:10346000FA2DD3536A5E6C247E6DE8A0EDC7F88C0C
+:10347000B8A4B07ADCD0E3810EBE97F1BCCC49761B
+:10348000D5C2F6F415C0861F7CDE0F735E9E3DDD4F
+:10349000D9C1F717A6E365B677EB7186F37AF5EC39
+:1034A00040935EAD49B00B2F3DAF59E3E0B884388F
+:1034B0006029ABA7F5C7487CC2D2FABD2509033BFA
+:1034C00040DFD708D126BDF6D17CD688B661B203DD
+:1034D0001ACDEB51E79A558DE77DC3CB4979D09F43
+:1034E000C297E0461CC022B4087B17FD1DE2D70935
+:1034F000F06BB488135A84DDF489643BE6AD886FC1
+:103500007799E30E3F6EB627FB1F8F1CF788960F47
+:10351000E2E052113D3AA0BCD8B85ED4C7F5278C82
+:103520008BCA79438AFE01FC467EEDB2627C23ADF4
+:1035300093B3BC5D196F6B2EF53BEA6B8B19EFEF04
+:10354000634DF0E5E2FF3385166A90E3AFEC1C179C
+:10355000AC83EDA771D42DCC0962BEEFB18B801383
+:10356000EB982976F66BEB1202097D51AFB84288D1
+:1035700027BD606B9821D739C2B5D90BF97DE3110E
+:10358000C8FF0D2D7605F1A98E0EF105FC25A126AB
+:1035900089CDA911DF6FEFE2B885EACC5C8FB86204
+:1035A000DD50FDF90C3B3FAFB109B67B8119B18C01
+:1035B000D79A64FF6BFDA97E4DB58C677E2082ABE8
+:1035C000BAA2FE0E95EDC070CBC6CD0F621D333989
+:1035D0009DEDC69AE4706625DA2FECEB09903CEC81
+:1035E000F987CAF6608DD797D12E1E7A50C605D7B7
+:1035F0004CF665C4A6A24CB360BC1D49CFF3F36C76
+:103600006A47E54736D9EE439D6F44E90CE8DB870E
+:10361000E7F510D03F57E7168CCC65FF47C63BAFA8
+:10362000952C10336E7E80E3AD0F6B6A50CD065D36
+:103630007E736F4F826F98A3BA1077BBB62486E370
+:10364000A1D76A7A3C749A390E7B75AE6F642EF1FD
+:10365000BF3CD4A7DBE108399E71738F9F433F7C49
+:103660002A645CFAD769DA38B4137BBDDC6E2F3973
+:103670002B3FC04E38DD03D87F9E67AC1BC3734120
+:10368000DF7DCD4EF64B2F260F42789C7DE9FB0F58
+:103690005A4408F2DC05FC4961B90DC06F0B846225
+:1036A000580EC64F71727CBD25DEC2FB0C8F11BF58
+:1036B00060DF02BBE53E03294AE6DF83FB3AB35DE8
+:1036C0009AADEBB19AE9B1FC5ECD4E5BD0023E2BD8
+:1036D000C16D5BF0DE8B316C3FCBF4386FD9F3FDFD
+:1036E000580EF6D87DD92BD0EF3E07F3B92CD19DDB
+:1036F000C4F5FF962250FF821E772E8B0DF7443CB7
+:10370000BB5B7B6D3EE84172C771F932BB7C7E28A2
+:1037100058C0FB1A82FC95B851040B1FEF4F04C828
+:10372000AFD9EC91FC035E5A4DE78DC057233CC0E6
+:103730006771BB8C971FA2B98CF11DF27766BC94A0
+:1037400029E3336EA6FACF16C7711CF55051FD5907
+:10375000F80187D2559EF7A4A1EE1D42F564731BB4
+:10376000EE21B872E1A76F0CA1A715351F66ED75A4
+:10377000B7D27DE6B2F20982E460E6A23B2689C4B4
+:103780008BCFD799650EAC115BE7B7B063B12661FB
+:10379000D2EB6B727D3590C350AEB612E3AFCC2145
+:1037A000FF99E4E894BDE151C4498EBAB5BB517F9D
+:1037B000FA8F5F6EC173616DEEC9F2E16C2C449CAF
+:1037C000A5CC22E344A3F3B4DFE6B29D4D64FE55DD
+:1037D000861CCCBFB89C06A917EFB83C7B70AC6EBA
+:1037E000F31E85FA298DADABE0520D0E80BD3AAEC9
+:1037F0008413956E4C5F0DF3EA842B9C08FE6816CB
+:10380000E9BF956E8D1EA7DC4F2CC51FBCEE0CD9F1
+:1038100087135E8B48F53EECC2737B6BFBEC563E28
+:10382000D277988F22FE9359BF44FB6D7D06DE430D
+:10383000742F4DDEFB9BE1D917D22F1A36C67321A8
+:103840003EFA3C290A27629E1C57E43C3921A4FE1B
+:103850000A6C8DD1D7FF128F537FECC078A4E9F3A7
+:10386000E894A2B7DBE690ED48F6E0CF94FE41CABB
+:10387000DD8336CF5AB9AF66657D599A22E152474A
+:10388000BA0BFE5647356089855C56099E2F841B0E
+:10389000CFCBE33B32F97D43AF892221A0D74A77D2
+:1038A000646C947E9DBE0EC600A8FDA2A7647F80B6
+:1038B000A1FF8F3D99A9F72FE753345FA3E9F07E6D
+:1038C000AE8C5BD5240CEEF0CFE295BDD33F5E0706
+:1038D00015F4A04DCEEB4082B423E4B7A44FEE8F95
+:1038E000FD06BBE9BBA712ECB37DF1D877303F37BB
+:1038F000BEF769AE5C477689E27B47B5F925F84BA0
+:10390000E271C17A221A8FA3788FF07DF2C9F37C1D
+:103910005625DF49900CF97233FD840DFCF9D06E09
+:10392000F0F1D64CD2EBA5A055D7563AEEF16A99F4
+:10393000B023A7F47DA33DC904E7C0DF92F6C3809E
+:103940000D7E44CBE9B20FE767629F2A2D4FAE0F81
+:103950006A6212078824945941E8816AA22BEAC955
+:103960000EF27EDCB1AAF1F71FB6B58EE78B2A9F67
+:103970008F4CD07978FE5AAF13F373C13AAF734EC0
+:10398000043F6AB6E61E7413DD4F6CB562274BD454
+:103990005883BF19968AE76A2820B8DE097A9F887B
+:1039A000DFFF06DACD5F973C508DD04F0BD68EF3FC
+:1039B000CD8BE043BFAD66BEF40F99E12BF69A6163
+:1039C000377832E8C7BFE70D9BE1DC8366F8B9FCC6
+:1039D00066F507D8A7784BD0A9A06C517F807E0FE1
+:1039E000AA41AC33BADC51347522C147D6CDF5803B
+:1039F000CD0BDE5B3618FC3BB9FBAE3DE5F4DE914A
+:103A000076160FD657C745E8FD89C48FF975F7D9E3
+:103A1000AD6E8CD72CE77B2CBADC3E29E37A0B8386
+:103A2000E6FA0BF543B51E4712BD23E52A9AFFD4EB
+:103A3000EF753E42AC6CE9D4FBE1FF944C2081274A
+:103A4000FC8686EEB38BF8CBE927C072634D14E198
+:103A500074C2AFE9AE048EA70C5B3A467C46DF2BFE
+:103A6000B7BA0663BF7D8E5371617FDB889337EDF4
+:103A7000CCA8803DDDECB278904CE1CAF7D767E680
+:103A8000613D21422E0FE2F477AEC43ABEC49FC816
+:103A9000F45928821C679FB3DCD1AA1FE9FF79ABD8
+:103AA000A3F05913514FE32859676EBF68D30F8EA7
+:103AB00048D858970EABDBA062BC37EB78AB0199C6
+:103AC00037304C8F3F1C4653B2377FEB56549C87A0
+:103AD000F66B46CB7AAB53B7B33E5EE795C7DBDDFB
+:103AE000ACCFAC6FADE4FD1A9A87B00F0713E6FFB9
+:103AF0001CFAEE8C53B81C9C47A231FC458A5C171B
+:103B0000F23E04B53FB34E61BB5E9E22E1F2C79523
+:103B10002062BAE508C2027E42C65DCB747A404E8E
+:103B20007C11E301BF2261516BC4BBC3BCFEADF08D
+:103B30000B0FFC00417CF499F6BDC3F623B0B30132
+:103B400025F4B017FE9EF93B957B7F7044C2E7E3F6
+:103B5000C5C4BA6AFE7E90E9A8DA850F7A5CBD33E7
+:103B600096FD763200B1B0EF36DDBF16AB82ED6167
+:103B7000AFD6C05E51B942F7C303F7497BB526D92A
+:103B8000D7D385FAFB323CA0C30D8ABEBE855F9FAA
+:103B90000CFF7A3FF7DBACB85C1B93D15E0462523A
+:103BA000D9BF96EB847FA86CEF9AC97FC7FEFC1A39
+:103BB0006F280C7CD63C90CDFEFA0B86DDBB3746D9
+:103BC000FAF317FADDEC5F89FBA5FFF891E0BEC5BB
+:103BD0009EEEDA863C92F3B96A116F2ECD5BE6CB8E
+:103BE000C077E74DB15BC00F517279FB1C9BF53C70
+:103BF00098661A2FE2EF8795A27A4B841FFC4C9EA1
+:103C0000B40F830B7C5BF4761EB49B67798BE93031
+:103C1000CF225C58CF6F3EA70A2BC19B6B1DC1659D
+:103C2000F4CABCAEBE9E8B73F09E8C371DF24A7DEB
+:103C30001F97277C41E87FFDBB2FE4594CA5182B2B
+:103C4000E32C8763A41CCE1445851CEF770B53FE31
+:103C50008551BE9227EDDE3C7B83199F4F5E66BE89
+:103C600090CD732D837C8F957EC7E15B14B6E734CE
+:103C70009E9E2E8207FF2E86E38587757B64D097F4
+:103C8000E487F3220CBD95ACCBCB9ABB83DB628877
+:103C9000DEF7D9486EC037921BE4F910DFD92F5CEC
+:103CA00033238DF97E83CE57716F02F36DB8C52231
+:103CB000E97C6F06D399DA8BBFE3BD716EE9CF5F04
+:103CC000E63A8CF8FE37F03D7A3D66F05B58838328
+:103CD000FED97E4CF9734FEF0990FC2FFAC303898C
+:103CE00082DA1DB5D6A679E8FDB2CD2B127D541E21
+:103CF000B106125DD4FFD1A03A3ED806BD3B0F52AB
+:103D0000F4F5902F11797415BA1E3FF6E47FACBC20
+:103D10009DF0FC4611CDD08F15BBBE5B793B8DAFBE
+:103D2000DEE76C863E3D626D2C84DE5D581CEFAF95
+:103D3000F660FE9AE3F28B9E7820CDCDF40E645AA5
+:103D4000D279FE67E2BD8A4D360FD67515EFAA1EF1
+:103D500037E6BD685E09FCA2DFAF0C7D6607FD5D3E
+:103D600016D1DC69781BF5A291F57CE5AE5F7FA5E5
+:103D700026A23CFA11D6179551FB0125FA7E49F48B
+:103D8000BE40C2A084D42F10F0D6F7A3893E9C97E2
+:103D90001020BC7AB0B8C83872CDB6870634C16F6F
+:103DA000D8F45AA292D3BA1F60ECA3B484E63E863C
+:103DB000B8EAC5E6E5A9A838B0A1C7DC7B1599B477
+:103DC0005827CB325B3811FE7ED9061BEB91B2A788
+:103DD0001FDFF230E4ED4387A7871BF0193BF44166
+:103DE00099E26B5658BF8B4465702BBF4A9FFEBC4F
+:103DF000F011F8D719AA9840FC5AF4EC59D9DE27EB
+:103E00009A63A87DE9CEA642AC0FCAB478BFB30DC1
+:103E10007E8D09BD646F8C6F835FA1A6428E536D4A
+:103E2000FB96F971749F223A645FF87EC986CFEDE4
+:103E300042AE0F9A539225BD60EF2A436AB13DE925
+:103E4000C2F6F4FD49CFE771BD0BEB954BF1F124C0
+:103E500068C1F29E2090C758F291233801FCDDB171
+:103E60002411F94F5F5AFD52EED7AF48839F576236
+:103E70000BA4B9B894CF4B1EFD19CBE302C59FE646
+:103E8000E2BC2DD2AFF93CDE0C8CF3E675D7F238EC
+:103E9000E70B8DE5B164BD5A14A4F2AC558CDFD9A3
+:103EA000C6BC796890D4770E71CB00CC93B3F4255F
+:103EB000D8F12FF5757DE06DB99E7688294991FB83
+:103EC000432583A45E0C88E021D881CA061BC7293C
+:103ED000D4B7CE16E23BB7665BFDC8DFA0F107742E
+:103EE0007A293FC8F58B1B790C95F88BECE998B7CC
+:103EF000C67568CCC1F75BEC3751BF5F639DE83195
+:103F0000BDC774FB72A32356B982CAB4B6F3BEEA26
+:103F1000CFCF7FF1B68890A7CAAD5FB23C89745508
+:103F200024A54B18FB11AE39F1FE24A2DBD7EF7E9E
+:103F30006647FC3B906A113D806FC3E70C0B4F7BDB
+:103F400037DA1BDFAFDCEB10E1C879BBE9F3A87906
+:103F50006DAE17C2CFF4AC14496ED8EF2FEDCD85FE
+:103F60002FA01FEA7733F5339FFCAFB0C9BF6A2E8D
+:103F70007C04FA64AFDDC5F107F23FC31172737EB2
+:103F8000BF53DFE75BA0EB83683A44EB87FBA2F407
+:103F900083F1BE58D7F6FE52AB5E08303DCB6C22A3
+:103FA000003FA3EC4307DB8FB2A7E57C14A44F7B53
+:103FB000D0FC38BEFDE5F76FC07A36644B9DC0BDBE
+:103FC0009AF56FC9339FF3B8E612FD633CD0BFDFAB
+:103FD000DAB1FE4D1F239A1D84FFF1D55E3BE4FE4E
+:103FE00082794CCFDB9CC7AB15D66FFF55BD4BF428
+:103FF000E6FCC04BCDD70517D1BB7551743D2B7274
+:1040000092905E2D5CC55D78FF208ABE065DA3F5AB
+:10401000E8B441EE36F528FD7B5F44D051884696E2
+:10402000E36F482F625FAD62D3776CD788ACCDC8A1
+:1040300027AF087EC5F00AD835865F9A8678E58571
+:10404000E336D333BAFE4EC818FD5FF4471BFB05B9
+:104050006575326F91DEE3754725E2F5DCBAB63E51
+:104060003335120E46C1A1A8F6BE28B828AABD163F
+:1040700005FB4DEDCBF6BECCEB2CC2DBD4CEB1F4C0
+:104080006A5E875CE85704791C95BBBEB207201FA7
+:104090009D9AEDD08BB665229040EF37BFA8B2DF76
+:1040A0007BDADD9C083F65458CF4E34EBB7438D960
+:1040B00080C5EC62C2E37460800B7902CD3132DEE0
+:1040C00072BAA839313962DDDE54A726BAA97D63F8
+:1040D000508C6F3BCFA586E753A3B858BDF4E7C615
+:1040E000A9DFEF90F99F5681FCD8C6EA6F77209E32
+:1040F0007498D64FF05FE6555F9F88FD97D375DDC6
+:10410000AE998E75E0ABAA9069D63E3BF220E64AA6
+:10411000568A2322F0E0081A9F9A9057FF02D6573A
+:104120002428D8FF9CB73ACABF11454961ACA7D72C
+:1041300044E72B04EDF06F16909D853E2A5967AE3B
+:104140005F54779CE7CBA2A8F9A2E971E3E8F9D222
+:1041500075B09EB7E0155E3D7F92F3F44E1F545943
+:10416000BE5A96DBC4CA5499278BFC92963A997F23
+:10417000D3B257C222A0E7F5E8F3D6A0DB09CCA75B
+:104180005E17F75B4EECFEF7C1BF84FCECF97800DC
+:10419000F6894FECF9B0E70B809FFB6BD6C7E2C204
+:1041A000F663F67D378BF1DAE710C0EBF4BE57B259
+:1041B000E06F9C7EDEC1F905A79739D85F0FEC4B05
+:1041C000E0B8C5E9CED21FAE79F1DB018D6C8F97D7
+:1041D000331F270EB64BBFAAEE3FD83EB6D439DC0C
+:1041E0001847E5BE389E5795CFC7F0BEDAE917BF2E
+:1041F0001D1C198FFBAF8EC7D8573F9D20A63F03CC
+:10420000F9D5FDFFCA17863E5E8DF5F2AE97EC73C9
+:104210009127F2A7FF3300FAF5F4332FB1FE3D6585
+:104220006B7C14B1CDE97B321EB10D455C8F3ED65F
+:104230005188AFF6CCB811F3E742BA483A9C263A17
+:10424000605C449712F8E517A347E5BF2C3DBE9A82
+:1042500025F5DC10817D9F56BA283EF93C81E35557
+:10426000347EF97CDFB703A0872E35DE7BFF1F1B72
+:10427000EF53186FFB7FC5F14A79CF1DEC66FCA2A6
+:10428000E5FE42B97EEEE70CEF48F030BE9739DF2D
+:104290005FFB971DFFFF0CBF8FFECB8EF752FC7E9E
+:1042A00055E777820BFBA0A75FFC3F59E2478CDB09
+:1042B00039E45F755EFFF3711BFE7C81EA39E8A586
+:1042C000F6AF89D0BB9E6CF64ADAF447060D518CE6
+:1042D000B838AFA7C6E02F37DA0F5C8E734C01F207
+:1042E00027B08EA9891F78E02D825F213F41E57DAF
+:1042F00059194F7A25DD1B94F15DBF403CABE0AF0F
+:1043000073197EDDFB9303C82B2954653CE6E56AEF
+:10431000CFA6061AC7CBC91637CE958DED34F7F068
+:104320004EAA7775545D589FD574CA75BA23F01B91
+:104330001B6F5E675D1DB54EFAA9DB5C3F5E3C936B
+:104340008AFDBAF1393681F33685681FB1AE4C1952
+:1043500022CFF7FC54D42E77C5FF783ACDD5E94467
+:1043600074E17D9B402755CF7333D34D806EA9A058
+:104370004B2EFBEF01E139F016C156DDBF12FAFEFC
+:1043800063A133610BD6D10E51100E127CD66DE5B0
+:10439000F3935641EB61394E5E4747D34DE8EB6AE4
+:1043A000ABCE82B19DC68441673CEF926E7A9FC7C7
+:1043B0001D4DE71F4FD7FD9D9680AEE9099E20E475
+:1043C000A2D3B3A988B3D6109D15A5959E069DA22C
+:1043D000E99E8FCDF541ADF4EE64F55A31CF46EA52
+:1043E000FEFC586BB2843B35A8F25C5E90DB8FF923
+:1043F000DA63853F323A3E99F343857E6E42D5F7C4
+:10440000C39161C778D0FA1479B693ADDA92219C42
+:104410005FEF120558B7168810E2B74ADD2BDF614F
+:104420007D84F32245BCAF59FF01E05E382F86FC46
+:104430008E75D613A6F36E51E72526E5EF1C0D7E8B
+:10444000CD594ACF10C772B9EB311F8BEF77B8C186
+:10445000BF4ED606AEA7B596AB7A2876AB430CC74F
+:10446000CE234F3F03ED5E19CDED970897928C74E4
+:10447000BB109F778C77C97C355ABC7E03D8BE3C75
+:10448000C15D23E32602F2D41D65577C5FB64F1F42
+:104490004BDF43BE9BD0D85F8EEDCE9120D1552906
+:1044A000E2FDF72EDD645E44F30A07AF778AEFEA98
+:1044B000DC137A694281396EFDC510B9AF69945336
+:1044C000F3DD729FC2E249C777E62CEFC3EB2F35CD
+:1044D000B6A87C37E8B8238EE5BC78E54D1307D144
+:1044E000F78B77A47880E6B1493B07CBF6337EF6AD
+:1044F0001E3DD7B6C6F0F39FE76B8F0F419E81E25A
+:104500009EB59B1ECCB9F6657B3A75A185269F4466
+:10451000DC715260E71BD8E79C344DE5F69384CC00
+:104520002B15CBE378DF7C62E02B6B3A7D6F222D7D
+:104530006A50DF14E3CABA85F02FD6E3CD7FD0E707
+:10454000A11A2BB467E28157E79E5DE9F94421F394
+:104550009BA3E7ED71BD7D97311E772AE8A3C4B810
+:10456000701ED6688FEFE0BB5FE9F4785E2F0D9880
+:10457000E8CA71F179AB1C4DDD1251DAC2BDA8EC6D
+:1045800033AC601FE46D425751B816DFBD4D151BAB
+:1045900019DFE6628EB327F476830F9AD0CF77AE19
+:1045A000E9C1FB394DA305CB4FD37DD906BF393FB8
+:1045B000C958CF358DF6D4237FAB79B4D3B3D1832B
+:1045C000FC9650187194436BE57E4D979A7077E88E
+:1045D000D966AFDC07F97C69AE1B7272F303531323
+:1045E000A13FE7AE51C30EC8FB6A73DE9270793803
+:1045F0000F7C6EED683BD6AFF3E27D768CEB4CBE64
+:10460000F611F8659C73EC0B9C708EA7B6F875AC30
+:10461000FBD4449ACF987F567722D6D5D1794F953F
+:104620007A7E9301FF3A4DFB0CDF9B93E4DE01F9A8
+:10463000F87469378EAB76CBD7CF575AC3DD419F1D
+:1046400047692E607E3E3844CADF8476AE9EF12CE8
+:10465000BF3102E36AB2B97A429E9B56C45840A762
+:1046600009CBA41CDF6D95F32BE8735B02F4FEB35A
+:10467000789FBE3BB3DA5AB481FAE9E414D6847663
+:10468000B4CE1DA63D0FFE4C0C541FC2FA7AAE6E7E
+:10469000AFE6AE96E7C1BA8C917C15D686B129F407
+:1046A000FCC8E6EC81C87337E466FEB082BF0F89B0
+:1046B000E0FF84025F617BFACE048BBB057A78DE73
+:1046C00034E5A56E520E7E18C2EBF93A9EE72DA492
+:1046D000271CC93807D82061E4AB426FD43EE4738D
+:1046E00046ACDBED6217D7DBE7C97CD42EF670351C
+:1046F000E75FDD225CCB08DE427E84D526C4D62A65
+:1047000027974F5691BEEB21C4F6AA74867754B909
+:10471000B90C55F5E6E7CF547918DE5595CFF09EE4
+:104720002A1FC37BABC673F97C55113F8FD63F73ED
+:10473000E3E7B33E71F5245E0FBD506E66B9092FF5
+:10474000E81FA770DD85F34742EABBE4DE52FF08AD
+:104750005D1F75ED23EF03E8962FF9615B35DAC233
+:10476000E737AD8D1990BB71EA89A79F43BCA3249D
+:104770009EF3B25A4423CF931661E173D9D03F0E12
+:1047800092BB2E778ECF8ECC3BBFB14411D608F9A9
+:10479000BAC91F23AC11F669F6D264133C73E93B26
+:1047A0007FEE40DFBFB1AB96974F781CBAF38BF525
+:1047B0007FA5E78FDD79AC873CA7FBFD86C8B84BAA
+:1047C0008B6896B0D5C9FBF18FDD9E9196A2DFD3A1
+:1047D000007E19E7A4BBD89B8F3E8179B842F52CA7
+:1047E00023F823F087E8F989CE9FE215DD56FE0213
+:1047F000F3DAE7F428F49D43B7F72BCCA7F68FE95B
+:10480000FB51179CAB4E97F6EB53D8AF6469CF0AB8
+:10481000A047C3D26E7DFAABB4C05DA8BF25D183DB
+:10482000130DDAAA0E810504AFF6DA3D2AE27A7595
+:1048300082EF5D201A4BBF226033DBB1C64EC988C0
+:104840005B1AE79EE3F2824E3E77451D613F664E5E
+:10485000EFFD22037AA9567161BF06E7349DEDA0F2
+:10486000DF14DE1F451ED034B29737E5AB3C3F7FE7
+:104870003FC4CAE559D873A26B8CF0707C66DE6ABF
+:104880006A0FFD58EBB5CF8FD0BF73F4E7737B5B36
+:10489000B8349E97E17BD83F5CE59D0EF9E888FA35
+:1048A0001C9403A703BF8EF185562562FF777EBE59
+:1048B00055EF5FF67B169392E07B7A77B5DF9CC36A
+:1048C000E7ADD86E19FDCCE93D706557D8EBD5A39F
+:1048D000411D5163F3A4A752BBCAF3DF71497FC4E2
+:1048E00029F3B3CB2E62378C38DD11FC29CF3DF292
+:1048F0007817ED786A07CE3D2CFAD8C1F66BD11542
+:10490000D22E899CE0E0A91CD034C7C5C73E75B241
+:10491000FE2EC2E724CE2521DEBFEB333BF24369F6
+:10492000DAF8933200AB4DC8338D8ECF1ED8F171BB
+:10493000629B71F15DEAE5C5C595EF1361178CF1D6
+:104940008C7BF16C1AFCAC4AE51CEF3355BEB822E7
+:10495000ADADFCB0E8B8F8F9F8B958FD15CED757A9
+:10496000DE71A4CDF879741CF0F1FCE8FD88F80242
+:10497000E889B307D520F6D35B823D92441BFD1B2B
+:10498000F1F3CAB5F4520AE6A53B09FB61A72FE291
+:10499000971FC997F6FDA41E6F3FBD5DE5F5D2E9EF
+:1049A000ED0941F8A715DBEFAFC73E65C52685DDEC
+:1049B000F372D1C0F4223A0A67A41D43BE5B0A9C7D
+:1049C0006B7712F495815FE953097EC8D5C290E2F6
+:1049D000DB4C78B438DD49ED23F03800B96A8F3C00
+:1049E000C0D060A6AB8EF7F3BA1E34DA2DACBB9FF5
+:1049F000E3D2D4EE14FB3B7F88139C27289ADF0078
+:104A00007EC7D7E57AB0AFB830B4B382F33BB6C750
+:104A1000B9108738A6E7391BDF69D0FB6BC897FE52
+:104A2000C9717DFFEEF80E79DE1C78623E1D53CC15
+:104A3000F982EFEBEFBD9F2FF7CFEEC05EE2A0D67D
+:104A4000F60B434D89DDA9FD977BDFE1B2516FBFC6
+:104A500030BE6100ECEE97BBE2783FFECB5D8F1479
+:104A600022CE7C32343A15F26F7CFF54BE8DDB9F30
+:104A70005CA78E07BD4450E6D99483AEB99178A661
+:104A80006C086447CE33996F747CD7B389969C5673
+:104A90003E963BFD4E9CF7ACDC754B11E4B8DE2630
+:104AA000E969DF35398063CC95755E01F9E5799662
+:104AB000C1ED575922DA396C1EF68B6D7B8B7D6800
+:104AC0006FC4A117EFB6F179C15957B8AFBF11F351
+:104AD000F0351BF361711FF7F59C8FD4A072FEF2C5
+:104AE000E26C1186FFB1E4B6840DD80F33F09D95CA
+:104AF0002BE77BD92A45F8685C6541790F4747E287
+:104B00007B00394AE98D83903FD9941DBCBB672A4D
+:104B10009FDF0DE3FE1623CF94E6714F9C73EC30BC
+:104B2000B41D8FFBC119856CEF0ED945007A21F0B9
+:104B30008CCCC329EB2AF3A31F86DCA3BF76E19EAE
+:104B40002934DE133A5FCBA6847B222FA3EC990C89
+:104B5000CECB386197FBA5788EFDE2B281F47E3C26
+:104B6000DFCFA119EF2747C851D91C8F1BEDD47691
+:104B70001EB7371EF8BA4EB1DFBA3B41C06FB53C25
+:104B800097A0E757C5701EB9F15EBFA152EE8C7BAE
+:104B90003FC40D321FF3419BCC577D707306DF7706
+:104BA00061B47FD0A6CD80FF8471C05F5F68AFED38
+:104BB000897D1703DF8589B58CE7095DCE17C6D6D9
+:104BC000CABC70FD1C31DA036ED2F3D89BB73938FA
+:104BD0007FE55846C337C0F7D8B63EC88101BDE768
+:104BE000EFE57AF21F899F8B9E7484517F749B8CB2
+:104BF0005B1FB505BF811E3EBA3E85CF471D6D1FA9
+:104C00001CCCF9018ACB02FFECA8A2C33617FB9596
+:104C10005DEC0453FBD4586141FECEF8296B67214B
+:104C2000BFA1659303E2298E6D79288DD735C29D8A
+:104C3000C47936075501BE1D7BF23FFA44FA2F4670
+:104C4000B9689339EFAE295B98EEC9B97AA89C97F9
+:104C500057EBF4BD66A8B453E571A107BBF2F82485
+:104C6000BD893FBCBEA3199AC0F9134FF750A037B6
+:104C70001E16C19F7F9CC7AB6C37F2E6CB9ED9F660
+:104C800006F66B8F594403FC0FE5CEAD3FC77D1B85
+:104C9000A9BF49623B24C4261EDF51973CA74A1393
+:104CA00096C7BFB08384174DDDDA13703DD91C85DC
+:104CB000E6D7228BC2FD2FDAD39FF3ED881F16DED5
+:104CC00027DBA9EAF8904F09FA6D91F9CA13DA05C2
+:104CD000B7C0DF6B5EDF4DE0FCFA3875DD00F0EF4A
+:104CE000CCA6380BE4A9FCAEE149C341B737550166
+:104CF000FFE38CD5D321328E104DAFE83CF0E0506D
+:104D0000A99FCA700F0ECDABD23DEBF9BE9052C831
+:104D100025E8F2A4C2FBD8A52B873FC472FA864DC2
+:104D2000F4A07E4F84EE4F8CE4CF3D43A55F70FE30
+:104D30003B760FB72FA5F6F2FDD71219CF2D36CE41
+:104D40006B89E6EB65BFFFA47A59EF9F1F7F88FC54
+:104D5000820117D2E18C68F8F9C7F4FDAFB7C7F04C
+:104D60007A9056007C8EEDB82D341FE33EFE740C15
+:104D7000EBAFE3C9524F7C49FA34D00B785CFD5B52
+:104D800096D3B7A7F279BF0541F3778D7E7F3B5469
+:104D9000EAF1F2144F12D69DE56F4A7D48FCBA86BF
+:104DA000DF7FD3C6EF478FA3427FEFFC3C7D3A8E77
+:104DB000E5E27847C98FE33B7AB17D6A4A76099686
+:104DC0009B6D36596F0B65C10F3EFE742F6F4DC43E
+:104DD000778F2787B25C11CF9B6CC19543A43E6D42
+:104DE000C6BA588449D50E467E91603D6FBC57EADD
+:104DF0005CDD003F05F9BD8307721976B4BB304F07
+:104E000077423BB99EFC529F779CB39AA6E793B337
+:104E1000DF13B2438F6BBA7F58B63D3ACF57D6D720
+:104E20001BEFD3BC4B35F28A2DC037644FE7788334
+:104E3000703F43F8962EBF6521F2C74BFDF7DD08A2
+:104E4000FFA9D42AC6DB09AF2645653C9A62C4ECAB
+:104E500029F02323FB89F0DFDE6AED47E0DEB6327E
+:104E6000FC41F3E0BDA16E293FB0A4F4BDB2E5CA98
+:104E70006A7CDFD02F1C284C6BA513F25A91DFD32C
+:104E8000345AAFBFC8B89B6CB23E7ADC063E478747
+:104E9000CABCA0A66CF76F47802F7F51F97CD799C9
+:104EA000EF7393DAB5E1A7B5DA7B7B6B9E2DE1FF5B
+:104EB0000D7C6BFACEF3BABE2B25FC8067CF75E66E
+:104EC000BCF2DE9BCC70DFED66386797191E506729
+:104ED000863D07CCF021BD5FACB3710E19EB6C942D
+:104EE0005867BB1D729D0D18EB6C945867E339D65B
+:104EF000D980B1CE068C75366083DE586F03C67AD2
+:104F00001BF5BD86497D2E7CE134E46B5658649ECA
+:104F10002FF1C3C7E79866D84DE7524EBF28CFA5FB
+:104F2000903C487DBF309EE7C9C36831147649CEB6
+:104F3000A7D4E71DC165F4DE38B7963C0C7662ED68
+:104F400057F32177155D1B39EFB569C52B3DEFA7E9
+:104F5000768D4A82805F51B1F6AB59F0A33AB8B56D
+:104F60000EC3089FCAD8869543386E1F66FDD15878
+:104F7000ED7EF34AC9478EBF14ABB8F982EA4BDA2B
+:104F8000B5993F149D772E569BF3CC2F95771E2D08
+:104F900007861FF898AD39C3C5EBF4118F22CEBB3D
+:104FA000584970619DFE598C5886FB8002AFCA3CFF
+:104FB000B59683369937B05AD92822FC93413ABD29
+:104FC0000D78EEB95CF6C7CFC3AB158BB84288EE4F
+:104FD0005A7313D6D7674A2CEC779F2929286C0F70
+:104FE000FF8FD6659813B86F2B125FDCB715293F7A
+:104FF000B86FCB7C6EA2A3A93DEEDB329F9BE86B22
+:10500000AA9FBA3AD7543FAF68B8A9BEBB90F82D53
+:105010005928F19B47F6C197027819E72D2E01EF29
+:10502000C84FC952022B592F6F50F8DCB87BE9AA40
+:1050300042D0E5048933E20886DCCCD5ED8BB0069E
+:10504000EC90BBB3A9B2FEA8D2F0C55DF4DE496F07
+:10505000ED165C8572D2B2EEC1116EE4D76FC872E4
+:10506000D13CBC5509A541F5140CD234C8D9616BAB
+:10507000E364DE4FDCD9BE5D35FCCE8383DEC847FA
+:105080007FDB55CE9B30E425CB26E3741B689D0166
+:10509000FF6A43ADCCE7DD509B12DB3D62FFC518D4
+:1050A000670BF820502E4B4BE5B89068C038C86F9E
+:1050B0005F06BFEDCC41E9B71BE3E9BE3CDC690903
+:1050C000D5DFBA3386E973585F379CE8F3D20037EF
+:1050D000CE6F54EDCD52E10F58B66FC13A22215533
+:1050E0005B0AB92FD9D0E3AFB8AF6BD17BAAC07937
+:1050F0009ACFD78C491C4ADF39F6B4CD3381E0BB57
+:105100006A1FB7639DBCC81AB4731EE6B60D76E479
+:1051100025FF64EB067E3E7F6B31E75D2E107E5EE1
+:10512000471ED1CF6519E32E2950D6B948BE3E1A85
+:1051300026F56349ACDCCF2379FE33C67566ABE256
+:1051400085FF38AD68A7BD989EDFA7B7734F9F3E18
+:105150000EF2D71292F76DB4BCAECA7BC4A6A932C8
+:105160002FE622F7F34C3D97CDF23DED5C3F5E67B5
+:105170005D1BEE23D7B139527FB4D4A9BC1FD7F23F
+:10518000FACBA953F1BD3A1BEFDE95D81BE4F97FAA
+:105190008BF0E31C817B7A8394AB6CE187FFB7E4EF
+:1051A0002FEFD463DE2DC976BA311F8A46A826F9BF
+:1051B000AC1C1B6792DFE9A29DE91CCD75482A89CA
+:1051C00080A74DE8666A7FFDB47E51FA60606B3D52
+:1051D000EB836151E7000B4C70399577403F89AB09
+:1051E0004CEF958B29ADEDB01EDE24FDD6F25DC9E6
+:1051F0001BB12F5E6291EBA1E99A7C5EB1573E171D
+:1052000022F6FCB9749CC7477CC0746E5BDFE74331
+:10521000BF1C0FECD6C0719DE60CD29744D1F2DED4
+:105220008D76C4D3C85D6E469CB43C4030FAF58997
+:10523000E61A9C1FB14AFAC67B5C5D9765B4CA4505
+:10524000C52E73BE55C5C177B89D91CF185D4F9ED1
+:10525000EFCA8EC07B82E2E57393DB9BEC88074D3F
+:10526000D33AF1BD14D1F79F95859A18CF6BF7A665
+:10527000B9B06F5B1175EF59A7E16E699FF4F83F04
+:10528000EE0D927E42835DC66DE3F75B78FEC97BCF
+:1052900076CECB658945DE1710459709DEF7B8BF96
+:1052A0008E19320F0D74B146D0255A8E40276B04EB
+:1052B0009DE60B49A7F9A44D820477849C45D2E76B
+:1052C00047D26B01FEA0FA057B9520F2DFA2E933FD
+:1052D0005F6B64FACDD7E2FD41D785E3A9B8E383DC
+:1052E0007AE8A71D19F29EC268FA2D100D2BB1EEB7
+:1052F0005D4076239CCC726177F23A4DF1C06EBB73
+:10530000F31BED36A9CF38CEDBF2FA3B3CEF5A3C2B
+:1053100034AB211782EAA97DBCCFDDBCAC8D3CDF6C
+:1053200029E764FCE4BA73562EA74D30CFBB6BCF90
+:10533000A5F1F31F4B970AD019728EB85E621BF766
+:10534000E621CE9778E1788DFD10430FB7FA75E628
+:10535000BCE58BF97FD171C2DEC3F538E12031C8DD
+:1053600094B77C11BF233A6FD9B0E32DF1D24E8EA2
+:105370005373DEC4D9C6E257555EA7BBA78FB7F0FB
+:10538000F9F157E57D77DA8AB34D904F2DC1C27A96
+:1053900070714257BED742D3E376463F59D529694B
+:1053A00088FF15C7B8381FBFB85A2D82FD2AA676C8
+:1053B000EE88762B9777CB825DF8F4EE5E8F0668E9
+:1053C000BE7C7A5B6A1AE2FE9FADB0A592E63CDF36
+:1053D000EED315E3B2909FF1D97D8EE9C136E85343
+:1053E000345CDA81F23B3F60BB75D2F27AE2747AC8
+:1053F000BF6CC5EE4484EA4A57BC33D8452EC5E19C
+:105400003CED9AE1BCBFBA610BDF07EDDAC0F709EA
+:1054100068484A6E8F7D8815CCF7458ADCAFBE554B
+:10542000097F7125B53B11735FE2F46CDC6E2A389D
+:105430004FE3ECA604FD3C5A35E70D9D88257F809F
+:10544000DA1F8991F43CB233C1C37762780259BC48
+:105450007E6B2FF7774A2D75D7019F6B52356DF80C
+:1054600020E011DC92AE723B3EB7AE55F7486A2B96
+:10547000FE61945B743B0D7F1B25FC6DE4CBC0DFAC
+:10548000060C7F1B25FC6D3CAF5C6BF6DF6ED7F71F
+:10549000FB8C7870979A662FFCDD4081E8ED673BC6
+:1054A0003BA1E0F7B05BAF4A7F6189E259D5C8FE06
+:1054B00052422DD69D3556E967073E91E7A22082DC
+:1054C000D04FBF50FB7AB09FFF50DC9D8FA1FD52A3
+:1054D000EC0FE5E11E53F2BD22E4F5CA734E1179DB
+:1054E000EE7634396191F0186786A9FD3857B6A970
+:1054F000FE27E97D4CF53F757B4DF0D5BD879ADAE7
+:105500004FF48C36C1D7E4FFD4D47EB26FB2099E7B
+:105510003A7E86A9FDB545C5A6FAEBA72F34D5CFAF
+:10552000D06E31C13796DC666A7F93BFDA542F8420
+:10553000FF09D0C71790F7AAD561FDE4C0FD2F4E33
+:105540002EA9FE0FC8631E4D22CDF7AEFCE5677C89
+:105550008FF57EE435D38C1B31C6E26F2B8EFF07AF
+:105560005DFE6347FAB60DE7756E03DF8B89D82DB4
+:10557000E46E1FECD4A0D6E79DAC46DCAA2143DE46
+:10558000876E6E7FB17623E2F69F7193C8F5AC3BD0
+:10559000739395F4D78821FB73BB21EF79C4E0594D
+:1055A00056D2372386EF7FB62BC1FEBA3B6771FD1B
+:1055B00015FBCFA0FE1F75C3243C55B06B72FB8852
+:1055C000BFDD84FC941157765DED91719136CFB7B4
+:1055D0001B25E88473E1A013CA30C93DCAFD24F736
+:1055E000280F90DCCF23BD564F728FF220AD33F1E0
+:1055F000FCDF689D89F2755A67A27C83D697281BC9
+:10560000687D89F2EDAAE95CBE5BA5F17BEF579559
+:1056100070F941959F9F7F54B594CB4FAA02FCFC33
+:10562000C3E1328E108F7B9313FEC9BDC97E17DF95
+:105630007F50A3DB2D51A7E7D5ECA7F52BE8D96860
+:105640004DFEC2D9BABF78F1F5BE557C11E1B74D18
+:10565000B6FA3E97FCEDE462BDAF3F2FF56AC7A0F6
+:105660004FDECB9EDA235785BDF3FF3989EADEB3DF
+:10567000B47D9FE43E5D5E3E1EE13B8DEF8D741E6A
+:10568000E2FD74770679ABC31956C07F65A08C5FC5
+:105690008EB436D4A0BEE63BE1C6BAF9A584F7794C
+:1056A0001FBC86DC659C3F56CEC9F5CA287DFFBE6F
+:1056B000E63BB97F3F0AB853FD4897ACAFB9992C88
+:1056C0009D17F521FEFE289C7696E7DB4C793B631F
+:1056D000CF358CE1FA78BB1BF9A6A39C61F93DA7F5
+:1056E0007021BEFC52C21ED9FF38D9FFA6EFC2FC02
+:1056F0007DAC3E91973DD2D98ACF32C6AF41DE37DD
+:105700009723DBD7E8ED4769D47F32F0F34BFC8A6F
+:10571000A9BDC49FF5DC287C3319AB6D591F9B2EA6
+:10572000CF278F3DA7D77BE4783B58258C3325A81E
+:10573000CF4CD1848FFACBCC141EC4DF46A536647F
+:10574000707B3D9F21C12ABF97E491F77175FFBB24
+:1057500026F7038800C0DFC84B32E66DE776E10C20
+:10576000F8799D17DBF97B99EA4E2FF4F5A75EAD2A
+:10577000EF08AAB73A2D3CBE1A9F3C2FFFD68BEEFE
+:10578000CEB85F74B2EEAFFF13FE5F81F7473AF712
+:1057900049FEE392B7CC5658994FFF0F6D93FF9295
+:1057A0005E242F183FF19FF9017EEAFC570CFAE8BE
+:1057B000FC3FCFAF6591F5BA7C5CC8FF90E4B72E93
+:1057C0004FA39C326F02EDC1FF9156290F35313244
+:1057D000DFE3A584C287714F16D1A608F1F991863F
+:1057E000BCF8E5F9E1FFADFCCFB3CA7BE41C654E24
+:1057F000BEA7EE52F230BB5914E2DECD8D03B57D6B
+:1058000098D7C5E7DCF580E78AD18570CF8DFAA7F8
+:105810002E52AF7DDD6C036C3C7F1BED06B5D65B75
+:105820009D6FC741EF19DF31DA7DA57FAFB5DD4050
+:10583000FE9D8D25E342EB60BFC6575B396E4D9EE2
+:1058400009C307C99EC97C4E5FA2372D32FFD373AF
+:1058500060711EEE0B95E7B744BCF4ABDDF41FF4AA
+:105860006AE1F745CBD19F50B75BB1EE388B7C5ADC
+:10587000FA4E61AAD93F1F1FB5BF7E55CE97EC8F58
+:105880005F75897BAB7F3742F7A7B345F67FF2DEC2
+:10589000D08747B07EBEBC7B437B8B3A9683B1C535
+:1058A000329F8BC66F1988B88D4FF801170ABF1544
+:1058B00072305ED45AE5BAD277A2228F57ED4C9F50
+:1058C000AB45989F4F24830263720D890FE097E3E5
+:1058D00026CDC47DC06372C774C7F388FBF3FE0096
+:1058E000FC2A54ED6FAE88FBF3F68F95F36DF1B59E
+:1058F00032DEB4DFD9AD4D3FF455B2B7DD7B802E3B
+:1059000082CB3F933DEE4EE37E85EC31E0AB7A57A0
+:105910000BBC57E836E71D19EF5FED1A23AC2917CA
+:10592000B777570FF86327D0F9B5E45E63C1AFD7F7
+:1059300092878C453CFEB5E40E16593AEC5CF67F36
+:10594000AE7B5BF819F3A3B5BF42EECFB8FF776C1F
+:105950007B79FF6F345DAF1221137D27E8F4FD11D1
+:1059600074FD087A349AAEFBF475C57EE73B7B8CF8
+:10597000BC29C493BB2F6F60F8569B9C07E5CF4DA5
+:105980002C405EF4E2F7647EC751A002BBBB7438C2
+:10599000E33F6AE95061CDE5FDA800E85DE6947457
+:1059A0003C19786900EE29AF4FD18E83AF5FAE53BB
+:1059B000F9BCFDC96762381E7724F86C22E869C813
+:1059C0007199EA5ECDBFA7F19A2AEF59FAFEE52C4C
+:1059D000DC2B7A31B92679FE7AC4A036E4399EE40C
+:1059E000B9FF85F22C36C97B0CCA9C856DF2D9585B
+:1059F00077BE30D0C7FAC225C2B740FE2B845C1FE9
+:105A000055385F97F754128C73AFD17ED5E0586A42
+:105A10004FF576A7CC1736F89DE990F75866C6097A
+:105A200017E22042CBED0B7CFB76F7C58DE4FCC280
+:105A30009CED91796BA3C2FD78DF79FC4195F3DD94
+:105A40005F8995F7B837123F14F24F7FD2CF1FDF2F
+:105A500095F8983C444B1B8971A9DFABE8F7F51E1C
+:105A60008A48E1F8796E3CAFB37FE47A3D6BA4AE2F
+:105A70005F068801FFF4F711DACB7B8417BF9A1B0E
+:105A800004DE8BABC9AAA5F2EF5CF03D7135589FDF
+:105A900067B7EA9D51A227FFFEC598541BE799FFFF
+:105AA0006FFB7D844CA1F1FCFBCFFE4EC278F9E880
+:105AB00082DF49C84C5C75404B6DFD9D8CE8DF4929
+:105AC000C8D4EFA7166E693F8CDF47B852F8382F5D
+:105AD0007F5CBAD9AE8C718D3EE0E2D21CEFC9BCBE
+:105AE000443ED74D23F5739D97E27BB9D0F92ECF75
+:105AF00075420EF4DF3B09423E8DDF3B31F86EFC10
+:105B0000EE494D7BF9BB27FF6ABF7312CD9FE8DFDB
+:105B10003D89E64FF4EFA08CD262994E63CAE259F8
+:105B2000AE0D3E4DA7FFD81FC0B95CE5BF9F5FF724
+:105B300047CDD3B362F520DC537ABA58EAF58BD956
+:105B4000FF695EDFEFA16FB6E97ABFC629E321BE28
+:105B50001AAB881925703F21E7CBFEA246DE03551C
+:105B60006395F18000F115F7E27D1BFB0F799F2310
+:105B7000F947B68E88CBF8F9FD80DDE9AAF144FC3F
+:105B80000ED652791EF89045FE9ED4EC1CBF82FDC5
+:105B9000CB4E5DB5A7A0AFD245D1CEF91C97F70F7C
+:105BA000817E9FF5274716EA677591F7478A1CF9AA
+:105BB000BB4106FEB332655ED6B323753DEE9179E7
+:105BC000587B46CAFDC0048F8BCF3514E7083DBF14
+:105BD0005564CDEA0F39FE84FDF816B7F4AB1B6DA2
+:105BE000F21ECBC0AB329F679DFF6DF6FB37935F14
+:105BF000AB4AFF66EDBD1C674814D8C77D2CA6399B
+:105C000019F8F75A2B4CFE429FA0D39497DC6FAB48
+:105C1000CB04F70FA59BDA5FB1D76DAAF7867B9B04
+:105C2000EA730F7A4CF0A0867C53FB211FF84CF0EE
+:105C3000D0C6F1A6F6C38F1499E05323BB4A3A416C
+:105C400026693CB396B882F25E7C1927E96297FE1A
+:105C500054CD6D723D61E4AF6BFA3C88CE5FEF6C62
+:105C600095F9EB76BFB46B5ABC5CDFBADA0997CA18
+:105C7000E7621A18C6DD109C371E30E7997772CAA2
+:105C8000F59565AC5C7FD8F53CF3D8DEF2DC8B9102
+:105C9000574EEB0A1FE8DD5D34CEE0DF2FD0EF1367
+:105CA0008D96E7BF8FD4EF738AC2BB8B5D9EA7AB87
+:105CB000B9CDCEFBE75ABCBD4949BC109F6E7A7E78
+:105CC000E46667DBF73E39474939BB21AF488CA210
+:105CD000768F92D962FFEB82FE3C8DD07735BFB2D2
+:105CE00073DEF8A5FA9B75851CCF4C8B65F6E41C1A
+:105CF0005E0FF23940A3DF74F44BEDFAF874398F7C
+:105D0000EA6F565233DFBB2692EC6EC8AF16BF92D5
+:105D10006157AC4856DBA07BEBB90C99A77FD3EA5F
+:105D2000D0BDBD08CF99F65A9BBC702068833C4C0F
+:105D300028203FD28BF8EB43EBE3891F8FE207EC7F
+:105D4000C8CFE8B2AFDDEC4077F899CD2C0F4844CE
+:105D5000C17E22FC4F75602BDE6BAE9479DFBE51A5
+:105D6000C2B8FF80F16AD1E3232D2274FEFC44A067
+:105D70000D79D3E2EBF91C826BB194A7CE11E7AC9D
+:105D8000B0FEFC9F3A2F21B0434AFDD86A853CE71C
+:105D90007809FA19E754DCB7D88A36C6E3BC881804
+:105DA000AF44D0E1892BA55C2E061DDACB76D04717
+:105DB000176B477E5F12F6175A843BC97589B8FA8C
+:105DC000FFC4F833AD32CE90E594E7453A5B35D663
+:105DD00017F6DEFA3D7717C8BBAE37F4385927AB54
+:105DE0009CF79D3C725E5FA8170EF0F7ED9ABC37EA
+:105DF0002D9ABEFC2F22AE629C5F891D2BF588A1D7
+:105E000017CE9F43E921D7A1365D3F04BB5B38EF36
+:105E1000E0AE04F33C7E7C94A46FA13E8FC9CE27F4
+:105E20007A079BF484C0BE5ECD0A95F504E9C97A71
+:105E30008DF02CC6BD2CAED6DF7BBBF90169C74601
+:105E4000F98A1EC4BEC99C3536B181F715E4FDB090
+:105E50000BF438797120EA7E16DD1F3FBB5A71E1E1
+:105E60007720E6AE32D72F88FFE213AC1F6F8EBECD
+:105E7000A7C6D8AFBB441CE0FE51BAFDF7088F9E01
+:105E80007FBF0CF89D0DCA7BAFCF9F57D2E33F2D4C
+:105E9000C167257C87E07851B45F60C06EEC9345A4
+:105EA000DCC342F48DED0DFBBEDCDA667EA341DF80
+:105EB000F3791EFA3E1D95CB56F07A46E637903EB2
+:105EC000E07DB913540F3FF044E00CB73FB12B868F
+:105ED000F34A4E7A1B0660FFD6D8A7EBAEC97DAC5D
+:105EE000965D0932BF21DE22E1ADF21EFB457F0F38
+:105EF0000EC03AB631F0ACE99C83D668DEE78B2E53
+:105F0000B5EADDBCDE3C9CA7D58D427EBDD5E3F471
+:105F1000107C77FC7EBEA76B02AD1FA1D79097B215
+:105F20002255E2CFFA2B7046D2CF2FE9770D397A7E
+:105F30009C9F27487B228E2968554B65717828F7EE
+:105F4000FF63F7C1A69EF3CAFDDF73C3F97D6DD56C
+:105F500050867B079B477F40FD5EA7C5BB1147BAB4
+:105F6000B6E617E362E9D38DBF8F5FC16567F3F9CA
+:105F700001A3FC58B7238DB6B6EB27E8FA67E19585
+:105F800086BE96F2BEB85AE17DB5C59071C0F7CA1B
+:105F9000FB390DF84CAD0E8F93F092151286698285
+:105FA0001F3C47FFDDB32D7AFC05E34789F1232E23
+:105FB000B05D8FCF60FC28317E3C87BE020C7D0532
+:105FC00018FA0A30F4154AE82B3CFF3C790CEF6BC9
+:105FD00063DF6E6CC47CC2BEDDD888F9817DBB48AE
+:105FE00018FB7691EDB16F17598F7DBBC87AECDB4A
+:105FF00045C2D8B78B6C8F7DBB4858E4FFB415867B
+:106000005EF34D36C153693D3036623E63DF2EF29A
+:10601000FBD8B7337D4FBBC5F4FE8D62A9E97DEC9B
+:10602000DB45B69FBD5431EDEB09D1CC767DEEDA80
+:106030001496A3D7BC451957B6E7DFA9FA99AD2B3B
+:10604000EB078E632C2E8FF5487ED78E97FCB7C852
+:10605000F3114A33FFBEC0993BEC121E67CEDF3608
+:106060004AEC7B8DB5C97D2F94D8F742897D2F945A
+:10607000D8F71ADB43EE7BA1C4BE179E63DF0B2566
+:10608000F6BD5062DF0B25F6BD5062DF0B25F6BD75
+:10609000F01EF6BD5062DF0BCFB1EF8512FB5E78CC
+:1060A0007E88F09817A1C7E0AF7737AD33490E4D22
+:1060B000EB4C970986BF1ED91EFE7A643DFCF5C8DD
+:1060C0007AF8EB9130FCF5C8F6F0D723E11B46B91E
+:1060D000799EC16F8F7C0F7E7B24DCBF36F067C456
+:1060E000D626AE3B7500656382F228CE1BDE70E5D6
+:1060F000B6D9D8BF6C8C51B29249A7DBAA77CC1E17
+:106100000B7BABE73F0E10CD16E81F0D8BC93C3E55
+:1061100067C879A5FDBFCBE0FADBF5FB11F81FF1ED
+:10612000DDBB4BF0EFCE18FBEDC6FB1E32DB288D3E
+:10613000F6AD70DBEDA2FB37DA716E55041E38D177
+:106140008CBC19EF1DF103B10ED9A2FF8EF096653C
+:10615000322F3A5AAE7EABEBA72D969DFB710EA661
+:10616000B958F1E0DC47F75A8DCF99F59F292CAA51
+:10617000B7753CBD1E4BE4BCDA5F5C29ED9181BF75
+:10618000111F257DC1E7074734378C49A2F65A60B5
+:1061900034FF0ECE04BBD07F2FD83F0CEBC97E015D
+:1061A000C5B73142CEABF5EF690189C7138F4D9268
+:1061B000EFC5CAF79E782C91FB9FB45CE13CB3110C
+:1061C000DB850FE794EFD1F1EFB73DACA2BFE2E57D
+:1061D000B23FE3BBC5EBB2EC38CF6DD0AB58348ED9
+:1061E000C57DD2224FC19DB2A2A75563BFB4C34C97
+:1061F00097057ED0E59E831A99973C0E7988A24E2A
+:10620000F0BDA113F3DE328D97C93518BF6B2A7824
+:106210006DA8056EB1A0DF49448014C49309C67807
+:10622000344DF8B389BED74D2F667AF79E2914D026
+:10623000BBCFCC0D96547AAF9FF69205FE5AFFDA8B
+:10624000462E8D71784624AB8027D85CE380FF848E
+:10625000710AEB8FE83C1EF8070C2FB7B13D37FCF5
+:1062600087C509E7F37CFE8A3C9F33076D9CE77383
+:1062700066F959AE2FDE1DC3793DDA5A85F59AE1EC
+:106280003718793B65B7BC3718F439961DDC92DCBA
+:106290008DEDFC1FAF441E4BD79D89381A7762F9EC
+:1062A000EEEBE0529E59BE5BFEFEACBEBF63FC8EC1
+:1062B000A9C8F1713E98E1070AB5CE1EB98F63FCFB
+:1062C0001E1AE94F6E7766AFDDC5BF47A7FF7EA9EF
+:1062D00011F729FE4B6E3DE85ABC5EFE9ED99C55D7
+:1062E000F7154E2778BECF19C6EFA147E7632D8C6F
+:1062F000F2032FF5FBA5C267F6FF2EE6EFFCFFF2D7
+:10630000BFB7FCBF73A5703700800000000000001D
+:106310001F8B080000000000000BED7D0B58556539
+:10632000BAF0B7F6DA37606F5C080AA8E002454DAC
+:10633000C936225EBA2EB9282AE206C4B441DC204E
+:106340002676AC21B3911ACA8D7B4348D6C04469E6
+:106350008ED5D6D433534DD1654A27EB6CB59A2EE2
+:106360009A263975A682ED25B53BE9F1D49CC799EB
+:10637000CEFBBEDF5AB2D776836633E73FFFFFFC22
+:106380007B9E66F1ADEFFE7EEFFD7DBF25136D06B2
+:10639000369EB1337B459F98C258C5BE3DA52C8E15
+:1063A000B1533526C6A05C562F322CB367992F4DBA
+:1063B000C0728E2102CA657F501C82CCD877ABAAEE
+:1063C000F7BF064DF7AF823616C68ABF1FCC5826D8
+:1063D000631DAB642A977E3F86B158C60A0211F44A
+:1063E0007EEEF789F4BCFEFBCBE87DB10DFAC1FC73
+:1063F000811DCCB71AE63BE5B650F9D44EE6C3F999
+:10640000F1173781B111F8070C99C1A43C368CB152
+:10641000D18AB007BAB359DF5F45E3CDFB3E83C6EF
+:10642000BB667C45C300E80FBD1D69D07ED6F8F77A
+:1064300072FAC17A5DEE295922948B8DFE39387E2D
+:10644000B1C3C4DC29F8FE564302D417325613EB0D
+:1064500080F650C6FDBA5CAC468861ECCE89D06946
+:10646000009459CDEB03100E5B98632BBC9AE7AAFE
+:10647000C8C67663CA9820C2D4E551ACA61DF7629F
+:106480000B64155DCED80FF8BB0EDEE322AFC4C59A
+:1064900027BA14A82FEF077F0EA26D29CCCA983D0A
+:1064A0009DD75FA924BABCC3E1EF96758A7520CE4B
+:1064B000C77F43CDD00EE611EF34FB5603FC5D36AB
+:1064C000EB61612C54B8F394C028DEE68754C6868D
+:1064D0004D823FB2E05C0C86854E9867C18A0C7392
+:1064E000657ACF3ACCD9D9F3A6C03EF2F0BC61BCF4
+:1064F000E56B4C3E4B0A3ED3E299ADA75DE87311C4
+:10650000C0578EC575076E17003EF314A6E4C25C33
+:10651000F399B62FE667B08E1BD4B2D7AF049A6C4E
+:10652000040F2ACFF18F70B9611D375B03530193BC
+:10653000D8CFD36BF2130D8CBD61E270B5985CCAF5
+:10654000605887697B867FB08CFB90E83D330612EC
+:106550009D76D8C7DAF6FB46C27BAF22F3FD995B86
+:106560004C0C07623E9313E0BC289D293E84BB91EE
+:10657000E3D191352F3DDD2CF4ACFF8889CD6B0F35
+:10658000B3BF3AC540F36C03BC954732F6DB5556B2
+:106590007A3EB14A6232A0E053AB12A8FC34E0313B
+:1065A0003EDB578DA2F7CFAD7250F9855593A8FC0D
+:1065B000E22A85CADB57E5D3F38FAB9CF4BE60B407
+:1065C000EB1605D6FB9041397C0FEC6F90D8C210CA
+:1065D0006FF1DCAD137ACE37A2E5BB0A3C8F2A9B64
+:1065E00059C6755701685CB08F4AC5EAA8075000C4
+:1065F0006C1B13A05C2EB2EE6647B873E7707C6C20
+:10660000FE7F2D3540BBC7EE8A24BAD5E057663EE3
+:10661000F0BA35A5077E1FD5FEDAC40C746C69325A
+:10662000CC7B434D84A33905F1C3E9C1F546A53BB5
+:10663000CC2E80D7BC298CC6BD32D5D988EF6F5EF1
+:10664000BBEBD10FF0FC76A6985D709E15DB331A7C
+:106650001364ECE7BA5781761536C98C78778B3797
+:10666000C62CE3F9C7033D206EB3EEE4627B0FDC7A
+:10667000B728028D7B7D361FFF1B3C1F6AD7622A1D
+:10668000D2B5E3E7733E3D1C9882F0F200FB581D43
+:1066900083F4F0E2143C77E94EA091C9B01EF63EB7
+:1066A000D59B1398E489391F5E83D90101EB13014F
+:1066B00096EEC93DF06B1E55497CCE043428C604C5
+:1066C000C38F113D85E2CFFBB80F804BE50A6175A2
+:1066D00003CC5FD526FA0401E9ABE00DA2AF564129
+:1066E00026FA7A70983991E84D90907F15F497A723
+:1066F000C643FBEEFB0469B38CF40A738DEB19B748
+:106700006AFD64A2B72A1F3C337BA7CB9FB5EE4935
+:10671000DA21E3312A665C6795A498FB07D1FBA2D6
+:106720001681E822B4FC9A22723A626F9A106E6562
+:10673000C365C19381FBE1F8B160458AB9D286F5A2
+:10674000CC6F807515A4B237B05D772BAC3785CF91
+:10675000332E68DC4A1C37685E68BFD009E57715C0
+:106760003BC1B54292CD8928572489D657B9629743
+:1067700009E1B308E02C64203C1C661B8EBF14C6E4
+:1067800007F8DD20F9F3B0FE867499D5C339547A41
+:1067900033CCC89F5C6BF93CAEA618F3E550AE3025
+:1067A0004AE624289745323A37589F0FFB57013C59
+:1067B000FADB705CB610654B285C2AD4F556B5C47C
+:1067C0009817EBDEB79AE474E26B4A387E214EE10B
+:1067D000785BE92D4A5E87E7EDB64B44B746C5ECDA
+:1067E000C075A9F09DDFB6CE9412D4FF5B158FC59E
+:1067F000291CCF0A52FD6902EEF7D60807AE77BE14
+:10680000D46242789E83F3831C0E8B257F1A8EBF41
+:10681000D8CAE1700E3FDAF4E7DAB33E0EEFAAB65B
+:106820000AA2BF1B8DCEE475D0FF4658A71B9EF36E
+:10683000D7EF4A13F009F42E207F905CC9CE207A5E
+:106840003BFEE0F5C9B47F583FC2DBEE90A722DFE4
+:1068500001BC21B9ABE14F7926A76BADDFE029463A
+:106860009A77F0944BA3D7AAB5EF51FD22A0579485
+:10687000B766F68280F5666084E1E837094786F6F8
+:1068800036C01F77620FFDCE6781F9C85F17AD2D47
+:1068900062AE20FE03F2B6E6B930F09A87EBCD2265
+:1068A000B945E70D74F81AEBDF539FAD9E7759AAEF
+:1068B0009EFE713C1CD7A1D567FBD36E4DEF69AF2F
+:1068C000CD5BD69FF7437A403C74A8F0C1F6CBA9C4
+:1068D0003D2F833C5EDD80FCE13ED16711F0F9780D
+:1068E000C3402C3F0BD216B6F6C5F297DE9D0BCFF8
+:1068F000CF1FDA548EFBD3D6B118F41DE41337AA98
+:10690000F2B9CA1F9E5FFC6292EBBA295941F8F3B3
+:10691000C0EF4720FFFEE2E977D210CE1FDB39BF80
+:10692000FBD9EF1F37B1D49EF55736BD67AAB00526
+:10693000C38BF3BBE65107E9FC168DE2FD1679BF68
+:1069400025F9C5407EA5A59C7FFE15DE6779FB5A1B
+:1069500007B577D9FECCCF7F1093C4C40B9FB77611
+:10696000BEA1E7FEA8C9E94F407D34B54547FFA168
+:10697000FBAF50D75D3585F3B71B543CBEA1BA952C
+:10698000FA5536553C8E7AEF7C8D7EABF4EFB5F33D
+:1069900039B5D644E7736A6D5A23EA8BA7DAF9F959
+:1069A000FC8BD83E7625B4FB62D9D65B1253492FB7
+:1069B0004946BD04CF07F5D21B55FD74099C0FEA6B
+:1069C000A761CEE736D4CBB4F292C7F8F92C7A7A25
+:1069D000DF277F9409FFF8FEEEB3F890FF56B63F2D
+:1069E0007BE84A783FBFA9D59402ED3C5352083E5C
+:1069F000E7F87C4D86C4A2617F4D9B4CC8073CDA0A
+:106A0000BE43F05C832B33723EF328E8F0CD315C5B
+:106A10001E09FD7BDACF674A3CF211E61EC2B6C6FC
+:106A20009DBFFEA7553A2A48759849AE3544B1CD69
+:106A300012AEA3E27E36B677F9753482D305485D8F
+:106A400005E9F3E8144732D285A6BF86B6DFAAD29D
+:106A5000D7E0A8F6F9B8DEC1B120DF01C4BF895480
+:106A6000B251EFF9CD9556C9E3C0FE2E19EB2D5664
+:106A700026A17CDF6C90C7117E827E7F4F22C232BE
+:106A800090857C6FF8B2C0B7B83E44A78871FC69A6
+:106A9000877DBFA3C20B55F181FCBD1F9F49C67600
+:106AA000E25391B51CFF42F50CAD5FA87E11AA57C9
+:106AB000F4B6BF3D17B9BFA3292E1FC98908266D9B
+:106AC0008EA1FD2DC7F2B9FD8D628A01FA97FFF202
+:106AD000F24DA84F1EAD57769BA1FEE81D36EAFF8A
+:106AE0008FDA6FE83EE75755E8F6798E6E5A44B272
+:106AF000334EB56426935D07360F83FAA3B7461865
+:106B000010FE4753B8BE0016A01DF5C46DAA1D891E
+:106B1000FA383E511F6723B93E8EE5A755BB12F5E3
+:106B2000717C7F5CC5BFB248251AE57277BD5DDA1E
+:106B30008CF0F073BAE9AC1D4670003D81F36355EB
+:106B40002FE89402F6FE417C1AE4C77D28EF58ED49
+:106B50003086F65D67CB51BB211DF192AF4F6BBF05
+:106B6000C2D4C2EEC0760F0BBEAD306ED48AF7F23F
+:106B7000E2514EB7A56408D06F41ED69E2870B6C16
+:106B800003658672DCE66A9C88F5EB53A4D5D02DAC
+:106B9000AA2DA3B316FA2FF68E24FB798520937EB7
+:106BA000CFEA05B22B996A1F2CC1BFA0BCC4F6C6A0
+:106BB00070955F1A905F2EBAFF8EC644281F36B0BC
+:106BC0006E11405360289A8AE5820D310E0FCA5B20
+:106BD0000FDF0FDB087CD4DAC3474F4F72B26CA4CF
+:106BE000F7B3806F30FE68581BDA512B4CED0AAEBC
+:106BF0009F81DEB195E17A9DA4C7AF52F1A2B3EDBA
+:106C0000B05D56CF07F5F3E1AEEEC3F7E0B9DA0CAD
+:106C10008E6619E5BBBC5F46B8BF2532D4678733A3
+:106C20005EBFDCCEEBE149FAF1F24DA28F917E5CC2
+:106C3000363080FAD77A91F8E2E24D250351DF58D9
+:106C40000C65945F1B702AC0A7C6B61CDEAE35EF7C
+:106C50002137F0D3648139911F1D33068A101E2716
+:106C600037C5F7AF477DEF66CF0806F5559BEE4970
+:106C7000C6E7C94D11F3908FE74A45B931A8FF6CBB
+:106C80008CC940BB5FA3B3F46C2E0F6EBA39271EBC
+:106C9000E5DDB2BFEF795402B9BA187054423F48EB
+:106CA0007B94CF0D4D96ADDA9E2C026AD9E35C231E
+:106CB000116EFF62D8397732CA61C1B72D91DACB34
+:106CC000F1521F76F371B42B014F6FBEFB431AE7ED
+:106CD0002BC3DEC2F9D07FD9CDCF47E338FFF260B6
+:106CE000C70409DE1F1BEFCAC4F13F17366D93D0EE
+:106CF000AE5DBF692CCA8FF1AA7D54D0DF39773ED3
+:106D000087AF63B3DCFB7CD5DB0582A7565EE0EB87
+:106D10006766A897FA9959C2A7C4480F3E29B25A84
+:106D200094EF9A5EA2BD9F96CDF9CFC97E2DC9780A
+:106D3000FE4BB7AD4B46F9F1999D975D5BFEB4F8FC
+:106D40004E5887ABCD2031C03B979191DEBBC8CD6B
+:106D5000F569560DCC24B167FEA2EC2882F3D2F57A
+:106D6000993AB9878E197CFF9991E5E33A867ABA08
+:106D700033507FFAC8E85F8CE7FA11E8A7E8974933
+:106D8000CFE6F8F7518B3815DFBB57080CFD4F1FC6
+:106D9000B53C6F1FCEFD28E4C7602F9B7C5BA1BD77
+:106DA0007D7CBB1FF9DECD2FC48C4330E689E9F131
+:106DB000883FCB7798A60EE6FA145AD36C99D16F18
+:106DC0000E776E37A97AD4B9F20BCF9A11EF973DAF
+:106DD000D54A7E0550537CA8DF2C6B7FF68D413061
+:106DE000DE2DDB2B32711EADFD2D2F703844B080AF
+:106DF000B92448AFAE18D5BF7130F0C8E5D9F9AEA7
+:106E000007511FC273BA12D424655245BD119F1297
+:106E1000ED9319BB491F07FD8AECEB9BBD7CBC9B26
+:106E2000471D6C4CA57D15C5B2A0F3BF2DDB44E713
+:106E3000A5F5877D533F8FF5EEC702B05EC563644D
+:106E400011D742D9C83EDE86F063D1D256DC879195
+:106E50001D7B039E2BC57EAC199E1B6B96FF2BB52D
+:106E6000AFB748223C3D37D73D1380F964913919BB
+:106E7000F47767D7D0786E33973FEBA29E7EF846C3
+:106E800028D7CEB13900BDA11C4DF0D9F90B03F1C3
+:106E9000F944D6BDC700CF78065404001A92EA6AB6
+:106EA00021BEC3383F5E799BEC437E0C1C5C403CAA
+:106EB000FFE6951399B8EE6B87064E235E99EAA715
+:106EC00057E402FDAFCF56E1921EC8C4760376ABFD
+:106ED0007CCD7880E4A32941EE8FFA8A1FC7C2F5E2
+:106EE000FDD54078B053F03F8EF36A70DAA7D2FB3D
+:106EF0007319AE4DD9F05404D3ED7E683F5B8876AC
+:106F0000E07E0FF417D3C60D433FC4C72938AE1B2C
+:106F1000D0561CDCA3C766AB4B370F9AB41EE132C8
+:106F20000500CAAE065B26BD3F3342F95E66E8B691
+:106F3000C03AB2BBFFB2A91ECAD2AFFB3111449511
+:106F400027229965C3F8C26ED828EC6777FAEE4518
+:106F5000B8CE7BBBAD0CE1C4AC7A3DD76C48F4FF36
+:106F600012F1B926DAC112500EB567203F62B7D8C8
+:106F7000C83FB3E06C20EDE72897FEBA97F4F49F82
+:106F8000A5BA5E46B80E1295C32EA8BF57F20FFBE6
+:106F9000158E5F1BE5A8E7728405AF7FE71D7F8D27
+:106FA0008E857EDF748F303E03EDBE51AC0EF4E76C
+:106FB00075DE39E6B5ABA07CB52A4F42D7F54D82D8
+:106FC0006C44BBE39B6EAB1FF5906F6C06F2736471
+:106FD000EFDCF321FA21B3AD36BF188DFD4C5F060F
+:106FE000CB1B762029E6F8181231EC0780E74055D4
+:106FF0002E5DDB4F6F3F7666733BA853E53F46D966
+:1070000041703EE536B266C44306659CD768959AE2
+:10701000617DAFDAB62D40FFD5A9EF53FBA1DC3877
+:10702000B573583F96DE3B5FEC407D02F484884C9C
+:10703000E5533C7F4DBE96AA708968B9DE84F0F0B6
+:10704000003CD0BF566A33F82DE85F9DA38703ABA1
+:10705000ED2E47BC61866807D20D9E2F9EBF2C186F
+:10706000BAD955E79FF7756725FF2FA1BC00CE134E
+:10707000E15A7EEAF8E5BF62746EDFE23AE01C1B7B
+:10708000AE603DE7F7BFEDBC98D1D184E7B052B414
+:10709000B7E039788C5CDF73036E6D8DA16EDBF029
+:1070A0005C567A86D3390DF4009F403B0598DAE6AA
+:1070B00038E42B07A9FD56CD9F36AA86F84CB9C7F0
+:1070C0002221FCBE8B8CA6FE0CCED534281C9FE161
+:1070D0007CA5B68A115F59985E23E0B927E00CB011
+:1070E0009F4E43C08EFB0C44801609CF6B725255E5
+:1070F000FD1B3882EA67C5FE8FDC61DF8CFC46B47D
+:107100000E7EE4188822D6D41D3D1AD6D526B07638
+:10711000DA9749E51F4B6DA4CFB5C5F888BFB59583
+:107120000E71E05EBF616A7D7524F197AB0C062A93
+:1071300077CF1F48F6585B0CB0561C6FFE68D21B09
+:107140005EFC3B8F9774A7315E9FC146ACC7FAA225
+:107150005134DECB1ABFBACF4EE3B515298991540D
+:107160003FD080FD5B535C137388AE793B503CA8E5
+:10717000DD860D4A229EE7866233B57B4870CE5F7E
+:107180008CE35C6E23BD31303FF2E96DFC38FDE8E5
+:107190005FEAACE5FBD6E840F3AB0F751F7E18F94C
+:1071A000873B1B4E04ED43EBD70B10AF1531DA01D3
+:1071B000287CDE397F770ECF59370097C545769208
+:1071C000BD2EA73104369C9FC4B2114FF6003CA1DE
+:1071D000BDDB04E71CC7CF79751C9E73E1A6E07385
+:1071E00086F1DC2BE1BDB03CDA214CA2731E85E3B5
+:1071F000D7B24807DAD7E7CEEF555F063E4583237F
+:10720000C102B0F83CD5353F27AB478E3CF209ECC4
+:107210000FE0526E0964B5A07E6E60D5ED61F8C0D6
+:10722000A21C6E1F48ACDB84F275A186FF7521F8A5
+:107230001F1812733C4AC57FE8F74ABC73319EC3DE
+:107240005742C7047CB9F76FE2BC70E3DF9CC3F917
+:10725000D68138E7325CDF70E3EE21B7A1BE7187DB
+:1072600085F45F7676CF109CF77729CE9FE378116F
+:10727000C3BBC9BFDE99D86DC2FD75CEFF3C09F511
+:10728000AC85B57F22FABCD8F5AD8E1A6B42B91920
+:10729000939F610A40FFF8FC8CD7F15C0ECEB2C818
+:1072A00096307E905DB32626A13ED4317D6212F2E7
+:1072B000CB8E245833C953871DF9A869FBE5765C4A
+:1072C00067477E26956526ABE5923EF9EB17C05FD2
+:1072D000FDA0087C06F61A3E4F80BDE6077EFB291E
+:1072E000D86BF83C0AF61ABE3F0CF61A3EBB56396C
+:1072F000E87D47FEB0ED8817675AB81F6591D11138
+:10730000562F5BF694C8FC1A7F83FF6EDA12A52B0A
+:10731000576F8CD5956F6C030CB2F694ABD60ED329
+:107320009535FDB3D23B46F7DE5597A92BFF3F03BA
+:10733000DF260E5FF497FF6F822FFED682BC2BC133
+:107340003F00BFF7654D233EDA21B09A5878C64812
+:107350009CFF199D02F9DDF0D70272BB18FF00BA3D
+:1073600031DAE406ACF742FB5F435BB47DD1FE60EB
+:10737000CC61AA80F7A5F91112CAF3B9AC86E86C02
+:107380001E6BA1E70DAC9D9E65EC003DCB19A7C31C
+:107390006F2A0213F0F9719CEB53A4D36556D7639F
+:1073A0007168B725B946C6223FB2F527BBB4B7739B
+:1073B000420D9BA97AAE6D82BA2FF8CDC1B543BFFD
+:1073C0008351636FBF5DEE99471B1FE63B8D7CE3E6
+:1073D0002B139F675FD6C424E40FCC3940674FF569
+:1073E000365FAB2A272BF2399CD0678BE563A50269
+:1073F000C58B77B55ACCE85F38B6C6A4EAEB77936D
+:107400009D7BF810F7CB1C6B98968CF857DF3A32BF
+:1074100019F1FC98496EA805F81F9B0CFCDB417E16
+:107420001C07CA8723F976EA0F92223A03CE6D91A0
+:10743000BABF23B2C37C07B42F4D1499DB81F1F49A
+:1074400094685CBFB6EFD07557AEB5E8F060F6242F
+:107450007DB994997BF02D05CFDBDC538F7A925860
+:10746000D6CFD587DD5DFBF1D2FDAF05E16B72AE06
+:107470003D0EF51A36914DFC41ECE9DF1B7CB57CE5
+:10748000060DBE1A5E7D9FE31C999B45AF29DE86E3
+:10749000717494C71DDB391C5BA3AEBDEF2A80431A
+:1074A000F1FB22E3702E777F84F8BC83FBF543E782
+:1074B00009205D8F447AE5745DE17D8FECB78575B9
+:1074C00045265C5FB1AD3B09FD4EBBEE1A9984E7E2
+:1074D0007270D6C824E41B7BA68F7C64058CDB55B8
+:1074E000203A2C804FBB0A4EDF87E58E3A51C27995
+:1074F000BBB69F56F94BF7BE89B0BEAFF34D24879C
+:10750000BAB6FF73F84CF10EE03330FF191FE733C2
+:107510004B8C4ED608F32E01B8A01DFFCFE63717CF
+:10752000E233074DCE3CCCDBE8AA171CE87FAB9FCB
+:107530006E21FDE120D08785E353C30AE49393C015
+:10754000FE9510DF9C596853766C1F3600E1C5DC50
+:10755000CAC151137AF07D51DD9202F4AFB3B5A6E2
+:1075600023A877A33304E57331331E0904E1A9EBA3
+:1075700005534F99F0DA78241084D7A1787A1BE26A
+:1075800069540F9E9E616793CDA9BCFEC0C01EBE0C
+:1075900087BF60FE728BE86FC478BF86B7FF39FD86
+:1075A000BD72541280AFDC9D0BF8FB8B7129AF04C8
+:1075B0008420BE72917CAC35EAEF24F7D645FD9D60
+:1075C000E4DEA1E95CEEED9A7EFDEEBF20DEDFC5D4
+:1075D000F1BEA37422E1658709E419C0EB605D6622
+:1075E00034968FAE2D213AD3E827749E2E15FFB521
+:1075F000760B8DDD264718FC74D589BAF34C7B6178
+:10760000413FE7E5BDAF5F1B576BA78DBB3024AE95
+:107610001B3AEE13B9DC0E4DDB52D6E7F86000F6EC
+:10762000F4A33C94C81E7C15510FB89EB9013E5D71
+:10763000F91C3E5D05D7133D1ECAD7E8D2C5301EE2
+:107640007B708EE843FDB52BFF34D1E919A0531AA6
+:10765000A397794FAAF4795CA5CF632A7D6AF5E2F6
+:10766000D607E7DE80E3D689C4A70FCEC91C80F316
+:107670007DB6258DE685F550DED15BAF2DACAC1F18
+:107680004EFCC18EFCEB10C001ED8492D212B2A769
+:107690004B4C8E01E1F484D07D878EB76B9685F2DA
+:1076A000C8603CE277C57795B046E40B0007C4CFCD
+:1076B00043D81EEA8BB7723FF01E6C1F170CA791C0
+:1076C000A4AF1CFAADE040D161DAFE373B9EC35255
+:1076D0009F9E5F2C591FA53BB7C52DB1BA72F1749F
+:1076E000BE8F4375C30684CB6BBAD0F969FD2FF604
+:1076F000FC6F52FBE39A7F203DA5BF6E3C04927E57
+:10770000BED490FAD121F5E374E50BE1E361152FC6
+:1077100034397238425E102EBED45568A90ECED3CD
+:1077200088CEE3764B749E1AB7FF917235224FCF05
+:10773000AF2ED45FE34F9FE738A53C94A3FE12CA57
+:10774000DFBA587E14248713F270BD01C18CFD5B33
+:1077500055395BDDCEF16E5DD4FD947FF395AAA71C
+:10776000035E12BFFF5AE5F75FFF412DFF5E20BCAD
+:10777000DCB3636534EAED27B68F8C463BEC48BB3F
+:10778000271AF9BECCDCD157023E7EE904F909D3B1
+:107790009D6CEF5B7E7EA6F29D13780E2437253A12
+:1077A0008FA3AAFC3C8CF293E4FD287A1E44F909CD
+:1077B000F5739E55F5F4DF0A44FF4B8D2DE1FDD3A3
+:1077C0005BF4FCAA7A6354889CD4CBCDAAB58375AC
+:1077D000E54AEF305DD955A7979B796219F1F5130A
+:1077E0003E0EC792FC4C5DFB13B21C2D117C381C65
+:1077F000BE36C9D18867477CB1D1C1F4A2F1DF831D
+:10780000217038867040FCF496F4892747D5FE5ADB
+:1078100019EC4213CE5B6275BC1E877E84B5820371
+:10782000E35498EF3709CEF1C09C8CC79B83F48C4E
+:10783000F7F344C297C3DE3DE5987775060C30F444
+:10784000F3FEA96E4F32FA572B9E8A22BD2974DEB1
+:10785000AA023D9FF9B2A128FB23E857F2BEE8B384
+:10786000223C0A62887FCD7956F48950EEAACB89F2
+:107870000EDEC709950E35B9B3C45813F61CAB37E5
+:10788000EACFB1A4A09EC6E978506817FAC173D7B1
+:107890006490A4E7F72B31F2FD2F794A24FFEE1212
+:1078A000EFB7FB30AEB804F4405413FED4E42944DF
+:1078B000BC3EEC3419889FB6C716227CDC7344CAE0
+:1078C00083DDDB348CF0FC4853CE409CAF4985D33C
+:1078D00089ED168370053C9D26E6277BD54FE7F999
+:1078E000A5B784E4C609840BEA414689E8E2813CF5
+:1078F000EE973F0CE360BD01E804F5E12E9F98EFA1
+:107900000B431F0FA8F31C3DFB2BC29F377C7BA2B0
+:1079100051AF38DCCEC73F5A2745637CEA1D6FA6BE
+:107920009DD65700E3A2DEBBE37A929327BC1C1FCF
+:10793000719D641F3671F9D1E15D74FF6480C75792
+:107940006B45D23BBF6A2A299C8CE7BDD644E59C97
+:10795000A2528A6F74F8B87C39E43B5A8EE777C23A
+:107960000BA70FE5FA1D13F78D8FC37336113E5425
+:107970003DA53F97D2B57AFA825F74C604CACFA4F8
+:10798000B82CA81353D14EAA4C00F909947BB8A087
+:1079900084F22A8BDD7A7964614526C43BD42FB109
+:1079A0005DE52325597EA43FB740F272E10B3CEF21
+:1079B000DAB4E56A9277152D16DDBCC5757AFBA899
+:1079C00032C41E0AB5977EB4BC30D5948793171D78
+:1079D0009A5C60D25484FB1130AC9B33E0FD0B22E7
+:1079E000E5239FF14610FFAC5878EA1A552FBD16D3
+:1079F000F18039DC6C9266A707D159A5570CD1D319
+:107A0000F5F005FDF938EAC74DB1AA1C759790BF8E
+:107A1000EEF31CE510F1FB8BB5BF2F5ABF2D57F5C8
+:107A2000DB72D26F3B4A2D94AF79109B04F5DF5582
+:107A30007A3DF9750ECDBA9EF4DC43E7FC3A4ED59B
+:107A4000AF730D9DDBA102C067921B0EADDCA71EBC
+:107A5000A1F18B4FD57338AAF2C9C32A9FEC52ED1E
+:107A6000AD46555E78557971A840B5B7E218C90B97
+:107A7000A3516117C3676E6C8B0A910FB12176D445
+:107A8000E090F3D1CB8B6545AEC8A940F79684D181
+:107A9000BAF726699CAE9CB66527F98FCFC83C9F84
+:107AA000E81EC4098C9794F2FC2C666D27FF71A91F
+:107AB00043A6FAC1182784F66852611E89869FDAA8
+:107AC0007B298EBFD7CAFD61D7F5D82EA59DCA9E4A
+:107AD00052C6300F66B8360E80A31EF484C1E8C7C4
+:107AE000867912C040C3F61ABE0F99D34AEDB2ABE5
+:107AF000992440BBF4A929C4CF129842FC65E03216
+:107B0000A660BE0BF33D4FED1EBF1BF601781FF0C4
+:107B10005C47767989359AC7BB413EF68D67F53C5F
+:107B20007E991F4B7ACB102347CD5EF1566D77219E
+:107B3000BC0DD283264F25FA34903FA2356AAC099A
+:107B4000F1B4D8E624BF01E0F582DBD15FF98A9970
+:107B5000FB094AB97FF2E0F4898FA0BD3BF6191BFF
+:107B6000F9920F2E067C26FEDECDED84BA1237CABE
+:107B7000BD3FE7733937E6992FE97E44D776E6C0F3
+:107B8000F29EBAE74FBD8DF43247203BA3A32E8768
+:107B9000F365C69C98BFD9919FB39ACA93C030CE63
+:107BA000407A50561B711D00D766AA5F745FD67865
+:107BB000BA6F42F89BA0E6194978AE893DE5384591
+:107BC0002DB3ED544E28E0F9817F54F58376F53CD2
+:107BD0007FA7DA41DB54BA6953E9E6D72ADDAC095D
+:107BE000F5876EE47433C2E8B82F0ACA23DC7692B4
+:107BF00033FB0B8ED2BA81FE258CE7A64C179BC7B0
+:107C000003DCC65802C4A74B40ECAD86FD4C29A846
+:107C1000A7FCC51217A37845F19C7A5A5F00634B05
+:107C200057A1DE542F886A3DF2C731B17E6A5F6C7E
+:107C30006512F62FC97F7617E6E196BA003450CE6A
+:107C40009D532F107C2A603C68BFABEE011AEF50A9
+:107C5000355FC7413BEFDF51C1243794D358FEEE67
+:107C6000157C9D4E8C871EAA7B7E17C17B0E87F7E5
+:107C700055270D3A7ACCF047EAE87AF496FEBAFA3C
+:107C800091EB07E9CA039CA9BAF6B1F97A7A8F1C7D
+:107C90003E4E57DF915F6240397B668E96DFC3FDB3
+:107CA000629A5D37E5199B01E1317796A8F9710D6C
+:107CB0006C205A5D8CFCBE4DAA9EC85A8631CCDF22
+:107CC00078FC4E03E507AC99E3B162DEC3997623F5
+:107CD0009D178C4B7CE4D04E238D6B4DF10AE8C789
+:107CE000BC17E02C06E97F4D9A7C53FDEAB81E6371
+:107CF000D07AFACB0C33C6CEB56F53F1E901751DBE
+:107D0000C0B7A798705E27C793D802663041FF01BD
+:107D100073B89C0EA5CB76B5FFEFD4FEDB547CEC9C
+:107D2000CA7F7C7524C2651E237D244F5CB63A024F
+:107D3000D751C0881EDBFDBB2383F5C73FF636CE87
+:107D40009CCC3C1AC7CDF9E8E8D9822702CF7563ED
+:107D5000E0F377E1F9F2578DABA361BD4F08AC1D9D
+:107D6000294AE39F9AFE7DD5D74D543F7A1C9868E7
+:107D700050FFF2D7CDBCFD0426A3BFEB8FAADC6970
+:107D800052E9276D4B3AF917CFAC3793DDB3AD709D
+:107D9000C9E63658EFC899773DF102E24BE15D7FC5
+:107DA0007941EED1F34B0A133B317F7FC42A3B4329
+:107DB000FEA0CD9BB6E5CB6C5AB7646488A74F6E26
+:107DC0007DB112C7FBDDB6488302E33FB9D948FC59
+:107DD000E5B27B1FD9BC9E9DEF8F29C9D7DBF9BFC8
+:107DE0005BB3EE89EDF8BEF6F9C78E05E5E974CC14
+:107DF000BA2709FDA6075755B7E5A6F5CE3F4BCCE8
+:107E0000CC85F1BBFC97BF7CEE1D98FF03D765E3E3
+:107E100082ED80CFA7727DE7E0AADAB65CB0534767
+:107E20008BEAFD15A37B35C263F44B0365D4DF8079
+:107E3000148C2E8065FE8C088302FBFBC067DC443B
+:107E40007C60C69A343CCFEC270B769FC4733EA46B
+:107E5000E27B2FFAC841F59CCE954D32C1DDFD8AFB
+:107E600095DB378A9C44F6B1434E2A0ED2E70EDEEC
+:107E7000A5C5971C9F201F2F2E8BA2B8B216771175
+:107E8000F3BF6D403EBF70524D9644EBD7C7F1072C
+:107E900021FC3231CECBE3F56EB791515E106C0D03
+:107EA000E964A5389AF24D3E5CFA0B8AD7BBEB2DFC
+:107EB000525A1CC50D9EC1722DF01DCB788AE3FA73
+:107EC0005068274DE37E84D3F33C8F98E5DEE1EFE5
+:107ED000BDC0F998D4F3097D9F348D9F8B07CF25C2
+:107EE0004D772EBBF19ED479E7126D25FCD2CE459D
+:107EF0008C6EA2736156DB28CCFB88E72885FBD902
+:107F00008772A8F310F7977D50765BFD4A289F3A59
+:107F1000DB8F215D687195F2049E7F4047027CCB28
+:107F2000A4F68F57F56EE463A87797AB7197CE05EB
+:107F30008CE22EDA78676AFB497CBC5B486F2EAF17
+:107F400001FA475912F52AE9170DC3787E44B9ADF5
+:107F50007B01E5AB0A0607C6CDE343F47A37ABA154
+:107F6000F5C6BF2F923FDF10B596FAC70378F0FE33
+:107F70002166E8B260BF1218AD984F42570DE52058
+:107F80003D4BCDD78DAF7D89EB4739D03351379FEE
+:107F9000F003ADDFF3A9887CA0D62223DFC3DC2C5D
+:107FA000E4DB04BF14C4A375D45FBA8949788F8316
+:107FB000294CC67B9A823A5FE8FA613CAE17827E12
+:107FC00086FB15EAF8FC1B67F27B206C279383ED98
+:107FD0001616BC9E61BAB2EA27D3974D09669D9CDE
+:107FE000FAE06C49BF9A3EFC35A1FD0DB2B36FBFFC
+:107FF0006F7590DD95DAD35ECB13D3E03CA8D672D3
+:108000005888EEBDDFB222E5E7D3804E6DCC99FDF6
+:1080100036C0C3F5BE48F2CE10B597E01188E0F047
+:1080200039A7CFCEE3FA2E68E7F5946F0DF20ECFA5
+:108030000FF3B44700BE33B73E4F409B578B2F75AD
+:10804000AAFC38901258E00C038F46A4DF2CE4E71A
+:10805000DF50BCBB1CF55BC0E5C0EA2F74F73F4E98
+:10806000164D69C47587E621687AA976AFB4D3CD79
+:10807000E56CA73B93F8CE19666F21FD3F94DF189E
+:1080800019E57DAC14231DCDE4B7BB9BF2466ADD38
+:1080900016C902CF590EBD3F66F624BD3C28526278
+:1080A00043E485DEDF55EAD4C78986B7DD41FCEBC2
+:1080B0000CEA4DC4EFF87A8C6A5E9909EF978868EC
+:1080C000AFBBE9B957E5CFEFAA7A6604F257781F3C
+:1080D0008589E5808F7616A0723F44F96198D22E8B
+:1080E00053BE632C53A83C80B9A8ACE54126321F8F
+:1080F0003DB5FC962416A0F250D487442429999EBD
+:10810000C3D00E19867A9EE35CBC87F22673522890
+:108110005E50C4944FB05D41E65724F70AAE67EA5B
+:108120003DDC138B14287796B29E7BB9986792C773
+:1081300054E4FC7411DE3FEE9CAE958FF3F214DE36
+:10814000FECD3F7DF138DED305FEA5D67FC6EBCF51
+:10815000954F2E9A82659381CAEF637B280FC8538F
+:10816000DE9A06E7FFC9344678E4C955DE092E0FCA
+:10817000CF55F621DE68E5095395FDC1E59539CA6D
+:108180007BC1E5C773948EE0FE5D79CA215ECFF3B3
+:1081900097DE37294968EFC2EFB7C2048E87F87BB4
+:1081A000C3E4FA04DB294F09042F0BF0ED66E2DB90
+:1081B0004E86740A6463C53C22E033E6DBA19E8DE3
+:1081C0003353BE9F21CA96DC973F3294BE0226B637
+:1081D0001DFD744546D717440F217C4F70FFE9AF52
+:1081E00098C703F4908D7A7E408D8704EAB83F40AB
+:1081F000A313ED7DE87C17C27BA604F979537BC6F7
+:10820000ED6DFDA1787C40D5F70EAAFADEFBAA5FE2
+:10821000FADC7E03C698E3D61EFAEE9D7F1AD9F1EA
+:1082200020FE79FE7E8F2E3071F921A1BCE88C08EA
+:108230007F0FBBB7F5EDCF991A974FF95E43248AAC
+:1082400033308DEF737ED3897F021F1CD34FB35F12
+:108250001D5684431A4B98310AE66DCD67A4BF7A48
+:10826000727717D3F70DCA4082C1BA8EAE38861422
+:10827000C78467B83DD192C468BDF6142902F5A53C
+:1082800006956F5A58CCF4E1B8FE214692B7A1EB9F
+:108290006E88F60918571CE48FE0FE8D38E68B8057
+:1082A0007106E53BF2296FC52D4AF9582E6385A367
+:1082B000A05CD926CAF930CE9EB6125605E3564DBB
+:1082C000023E4719E93C9FA2BF8AC7632C8CF22D5E
+:1082D000D60DB051BCDABB66E4AEC5C837134596BF
+:1082E00006EDD31BC6E5A3DFD363EBDF9F624EEA47
+:1082F0007A3C36C79B780FC32D19F83D1249B162FD
+:108300001EFAA615C67CE4E749CF8E8F1683E07F60
+:10831000D47B2A02F3DB1F930C54FF585DB6F5465D
+:108320001BDE23F42B9467201D516C30EF0668137D
+:108330000FE3DD5F7DA46504EB1D1FA2F3CD3A3C86
+:108340008D729843FCA07ABFA529443F28C957F3F2
+:108350003426B00978CE573C71D6847AEE429B4CD5
+:108360007EF4EC2681F25302BB1CC9784E47EF1B0A
+:10837000497E736F93A8FAAD1DE4B70E24B164BCB7
+:108380005F53D122905E2C7ABFADC77E4347C98927
+:1083900038CED0F1DD89C1FEB2C7EEFA4504F25104
+:1083A0006F9941F573331A4796156B0AECFF53AF7B
+:1083B000C0F3274C9280F798ED0F8A11B8AE2E13B8
+:1083C000F75334033FC5FBB9CD538AFBA443D3F71E
+:1083D000B0CE20BBA5212E3512E7EDC15F85FCEBA9
+:1083E000C75A32293EB2B9299BF24142C7B9771523
+:1083F0006B47FBA46195959EE7D5273B931DD0FF66
+:10840000D3D6298D20A4D8A7BB9626E0FDA0C52DE4
+:10841000161611068F8FB54EA4F916E33D669CB76C
+:10842000A5C88C72645ADB1433C2EDDE55CAB3C1E1
+:10843000F31416BBD6205D46B53C4B7862637E379D
+:10844000C2F3DFAE519251BF3896C6C2E6493E90A4
+:10845000CFED8477AE71D27D924F93C2B75B97CF49
+:10846000F335A3A7CBFCFEB891BDBB04E05C01F4DF
+:10847000540FAF8E36654623DE9AD83262521F946F
+:1084800095B8D19E3B8D7A3BF0F3C6BBE6AEAF828A
+:10849000760D778FD88FECE30A33D79BD99F45A20F
+:1084A0000BD00B2B903EFF638E55F204F15FD41F6F
+:1084B000155D7E1A971BA626D16F067E6EDA79FCB3
+:1084C0006F68EF20DE2A41784CBF09AA5DA0E66BF9
+:1084D000244C206D9C7E0D33E6FAFC0CE32E8BAC15
+:1084E000789EA17AFA797872DE3A82C6473D37974C
+:1084F000291141EB0096E0277FB98BCF7BAE9D5AC7
+:108500006F0406F34390FE1E5AAFED63E47A3DBD5F
+:10851000BE93CFF542806F9FF1BACB7CFA7E9FE588
+:10852000333AB7D1A2B2FB38CAD97522E5558F5973
+:10853000C7E3FF678630F213F5369EC67FF1671CEE
+:10854000A8C211E0DA18574CE7D95B3FB3EF80922D
+:1085500032B6C73EBC2C41BF2EADDD67E7F6751BBA
+:108560008BE4FA603BDA67161FF0BDB1F83CA0A0BF
+:10857000FC1EB56985D4D7BE43F919FE6458EF6275
+:10858000F5C864C035E40F9FAE17543D84250C9F99
+:1085900040571749FE607F2588FF015FE1797B3EE8
+:1085A00081E0D3DC7A74F3BDE487B13B782B7E5E47
+:1085B00063992607791E90764F9061686A604F7CB8
+:1085C0004A83E3C9DFAE7EFA097875E2A9E55FE385
+:1085D000D332A0321AE1794FDC9C6B13A1DD58B382
+:1085E0002F01F9E9129FE53CBCB36AF89282F7F3D8
+:1085F000F4F59684A0F5C37FCD3B9E585F89726ADF
+:1086000087D581A9E1885F6E1D7C02A9F85D9CAECB
+:10861000BBFE95EEE7474AA716507E7B9D85EE751B
+:1086200085C27789CA07987A5F43A3A78896910C79
+:10863000FD8B4754BBE9C85AB053A1DC586796F18B
+:10864000BB065D8E222521CC78E63A33FF6E4EB014
+:108650009D98DAB34F6DFC2E37F74336C2F84218B7
+:108660007FDF85C6DB53A48C990EF8BFB7C879F9B4
+:10867000F42CCC6F5A44FBADDD5ED7F536B4B97738
+:10868000A02B03EB8FAC1D36414047A451A6FB7EC7
+:108690005EEF73244F5AF03B3E60CFB7B41B2350BC
+:1086A000FF707B0D14BF6D698F8B1C8E72CA6608BC
+:1086B0001B675D349DC3AB479E38A383F5A1E65C81
+:1086C000AE0F09CF94DD9F0AF0F21EE2798A9AFE7E
+:1086D00021A97833C622117F96BC3CCFAD471FE25B
+:1086E0007AF519D4AB515FCAAA9282E5534334FF9D
+:1086F0000E4655AEC38DF730736C8CE4C750BCACDE
+:10870000807E0B1BF34D4BC1EF643818E6E7F6078C
+:10871000FD4706CC8E6FE3FA4EA4CDE650108F15C0
+:108720004E5756F81FC2337294C2701E63887E6122
+:108730000ED11FC490F282E97A7D42668E6884B3BE
+:10874000FDBEBEF338347F2EE84D74CFCCCD00FE95
+:1087500088A756379D4F34181244CF8A22C70DEC94
+:10876000D1FBF13E1BF7AF48142F129446F2DB6F9A
+:10877000CCE4FE8D44C6E35E83146ECF8F9DE4A6E9
+:1087800032D80F148762AFB248E4CBCB8A5CB723F0
+:108790007EA4001B40FBAF7F3A1388DC2F512F676C
+:1087A000B5171757FACD6EEEFFF31A221D9BC3E0E3
+:1087B000FDAF0BB81F2E720FEC0DF5DBEBAD74BFE8
+:1087C000254F7CAA89F069BC81FCDA5E7640427E46
+:1087D000F2ABE95CDE1F2A72DE3F9DE2B2CE14846A
+:1087E0007F82112C2A5076CDAA1F37E9F6D448D4BF
+:1087F0008B3F4C7C91E0E106D8A5C17F9B6AE3FAF0
+:108800008F82F78FD6AE26B8CA03B89F4CBB771EAF
+:108810002BF1FBFDCDCE536EBCDFBBA22095AFAFDD
+:10882000C8382315CA43EB0202D2DD3D76651EEA45
+:10883000254DF273741E2919B201FD65838DEC4D2F
+:10884000CB38C69E8EE1F5DAF7A31EB20FDC149C7E
+:108850004F52ADEEFB2121BCBE725501DF67E70E22
+:1088600000643FB48F996A7FDB16933D7EAE0C7037
+:1088700043B8B8B9FDFCC274DB62F770B28B78BD47
+:10888000FB2ADE1EE3A5502FBDFD7E15DAE38FA681
+:10889000849FF74B75DE47DFEA7E04E358FF59CF2C
+:1088A000E358BD9FB39F1980B76CB0B3647605F0F1
+:1088B000B9A5E679E1BE2373CD2CCE473A6DED0420
+:1088C0002F06F23CFA2ABA471FAAAF5A918E4E4B96
+:1088D0009BEB27CA9C8F644DA0ABFD1CF742C6BD25
+:1088E000B0DEEA4840FDD3B3B4BB01F98767D7D205
+:1088F0000FF15E7A799999F4D67263CDBFA31D64A6
+:10890000DCCBF35FF01B13880783801FE17DD36905
+:10891000D5FCFC164ADC5F2B3CF3B13307FDB18973
+:1089200046C24B4D8F1D6351DCE897DDA0E6B7339F
+:1089300071483DDEF7320E16C9EF1B55077A2DEE52
+:108940002F97E7EB2AF03FE4439A9E6B4B37EAF20E
+:108950007ACD2179BDC6903CE0AFA7AB79722A1FD2
+:10896000B2678DEF539F7A15EC605CE74EE043F8F9
+:10897000F4833D8CCFDD60AFE3F335B0D7D10FFE8C
+:10898000C6AA51F47C739583DEBFBD6A123DAF4B1E
+:108990000E98109FC91FCDBF33E717C8AFA7E19945
+:1089A00098966DC3EF76F0FA21331BFFD57D35D451
+:1089B000C7A9EDDDAEC5F49D3AADCCD62ECE4E277F
+:1089C0003F38959B67342F46BFCFE652C53A03F038
+:1089D0006480C15981DF7960775A286E11BA9F0788
+:1089E0006768723CBC1DCFF013067A3FCEC0197D7C
+:1089F000F8711E12F83AAEDAFBFE16A48F7E4546D9
+:108A000027E27172AA3E7EB07206D7F35E579FC905
+:108A10006FBB86F6755F5FA38FDEEA3D3B0005FA0C
+:108A2000F55EEFB5B36BB1DE13139EAE06AA74D537
+:108A3000EBF8366E4FB219406F83B11C6A1F0628DF
+:108A4000BFE4746D8E9FC8ED27D35B7712D25B575E
+:108A50008CAF1EEDC4AE5D4BD7E3774244A4372400
+:108A60000BA4378C7F68F456CBCF6321D21BFC3923
+:108A7000ADEE3D670ED26302A72FE1999DCB291F72
+:108A8000E32E9E47A3D15B8C9A2F1F25B593BD483B
+:108A90001FE6C07E407B1B04BCC773FC634AFE100C
+:108AA0000B1CAE7074F723E9AD6CC64FA3B77FBB48
+:108AB0002640F9139D294A02EA335EF5FB813F9671
+:108AC0000ECFCC3073B970B92F11C7D9A08E336DCA
+:108AD000C861F2FF15581D22CAB37C99C3356F7C5B
+:108AE000267D6FC8A7F6DBED5456CC80E780B9270A
+:108AF000C9CF3BC0C0E9F7C1B7CD8B11EF931A0EB8
+:108B0000164D437CB943247D3B745F1F14AA713317
+:108B100081CF0B9A5762701CF11E952EE53B3A38B7
+:108B20009F8F61521AAC27C12D15E7635CE86A0379
+:108B30007D4FA45FD1C11894CFDA78707009986F17
+:108B400082AAAF75DCF9F408BF76D3401D3DB7E0CB
+:108B50003E7AA3E70BF10FFB0C41E31394EFEB52CA
+:108B6000EF49FE58BF6DAF7EC4CBC3FB25AB66712A
+:108B7000BEE131F1FC0F682DE177019A8A5C4FE28A
+:108B80007ECED3FF764A7E17EE637934F995138C47
+:108B90005CDFC36F24F2EFE5B809CE5AFC4DD31762
+:108BA0006585E7172517BBFE80E36E62F22E94679A
+:108BB00036079B47F13590678817CB8A9417675023
+:108BC000FCE5D2F4C02F8B9457895FF7824F03AE38
+:108BD0005776F7856F538AFE63CF0F48FF65DC5FDA
+:108BE000BAB0AC8672B306819D84EB9DAAE6677825
+:108BF00086F07ACDBFEA1DA0C54F9542CC9F8C561A
+:108C0000E135C6E26415D0BF0BE530DEDFDB1BF0DB
+:108C1000E3BD600BDE2393D08FCAA87F4CADE093F9
+:108C2000B1BFF8E5EB182F32E5D0E744189BC4ED4F
+:108C300001EDFE8D94FBE3FC8D87353E318E8D4733
+:108C4000F8241BE40726C3FBCC87F33AF078B21E66
+:108C5000591C8BE272E2A68612FCDED6D2AD9F6E64
+:108C6000427FE8E47FB7303C0FD01FFDC6B0F95C0F
+:108C7000FF303942743570563CD71353C2E3E9E3F1
+:108C8000B354FD13F1344E87A76C66783C25FDE79D
+:108C900027E069E44C3D9E1684E06914CD7BE978B9
+:108CA0001A3B13F0F4559083B8AF17E72A0366F622
+:108CB0008197DF952A897DD507C507C8EE1BC12698
+:108CC0005983BF7BA83D5B515EF6919FD07FCD114C
+:108CD000CA8FF3D49EA63CE52EDB917D6807FD4745
+:108CE000AD450EF66781FEAED3D75B40AEB8C19EF0
+:108CF000DC304B247EB2E70E8BFF3AD46BEBF87D71
+:108D000084F2BA4D02E67B0FAAAE115CC0DFE21519
+:108D1000301DA17F8C62E8F19FC07F57980E903E76
+:108D2000BB0EE4B19BD817BF97A6C9FF31969AB77F
+:108D3000D04EF5FCCDE8588DE7CCA45DC88FA603D6
+:108D40003D617CF39A6E906F41E3BDB56312F9D536
+:108D5000AEFB1EE45F901F670A8C185CCEB126EA5A
+:108D6000FAE54929BAFA690997E9EA35BAEF8C5167
+:108D7000E32A595B72117FC40A9EA7305DCED0B53D
+:108D80005F57964DDF03B86232BF7F3773D464DD1F
+:108D9000F8A17AC1D5F03FA47731440F08D513422A
+:108DA000F5828533F5F740D71803D9C49F18CFABA8
+:108DB0001B7AF6DF880ED6C91CCFBD65A7281FC356
+:108DC00003F63FFA9B0607E597225D8C3507C83FFF
+:108DD000B761BE95CE63C38E27E8BB119AFF0BE83F
+:108DE00086E8686CB64479AEE9F65F537FB694CBFB
+:108DF000D950BA14EA5E22FD6FE36CD81B7E6F6D0A
+:108E0000760A977B3B03E48760779A19CA4DAF6473
+:108E1000A0BCB1DF08FE086118D2AF42F28925304C
+:108E2000C94BF992EFF1EF2932E6589388A6BF4279
+:108E3000798D80F6DD6FA979B488B711F9CCB17A54
+:108E4000327EEF97D377FFF1FC7C6C0E5E96AEE638
+:108E500065CDDE8E49602D98173B18C783B671B576
+:108E60004CF2905FC34FF543F2D9010FCDCFFBC752
+:108E70005731671394C51A45F537BBD4F87A37C50F
+:108E8000BD53054724FA3786894E8A7B473389E2EA
+:108E9000E283580D3DA3043F671E97C847AE00000C
+:108EA000A0BC603799E9FB19D94FDA187DDF68A9B2
+:108EB0007933E5650564F223DE7388DFC3DB60FF89
+:108EC00005C5099AF6F1FB04F724B93FC478E6A07A
+:108ED0003A81BE132E56F33882F8A6E89806F5625A
+:108EE0005D2B7D072EBEDA407EAD2BCC35BBE81C5A
+:108EF000EEB6D0F7E3BAA03FFAB9D6D90D8CE81593
+:108F000098C7397F2AFCBAAE7152DCA2EB6FFD48DC
+:108F1000DEB1103FA7C7C5F56F4F9C99E397EDD41D
+:108F200027C8B71BE322E97EDCBC6B6BF6211FD997
+:108F3000F09EE858ADFA9FD1FF3F14FFC0FC03B389
+:108F40003305F54E7375783FA59939F767A1BFF4DE
+:108F5000AE25097DE951BDC6456C06BF39FAE2E38D
+:108F6000220DE53C0EA2AD53DB67A36DB95029E39A
+:108F70005F3F312E52D64B5C24502320BF1F8AF511
+:108F800063113EDC6F7DA971919AC24B8B8B68FB9C
+:108F90009EA5FE5D0088ADE677505C80CECDD0B357
+:108FA000BE20386EC1F595E35F327F8F7186D96A36
+:108FB00079DF5307BF44BFFEDEDFEE7E0A9FD79DF9
+:108FC0007DAC6C39E045D1243BF97BF7FF32E641BB
+:108FD0003E9C3E7E30CB61D1F9EFF187F849EB1032
+:108FE000F8BDFCE0FAA29075651BF5F1805C9BBEB4
+:108FF000FDD4387D7DFE107DD9CC6A084F43F7BB88
+:109000003AEA6ECA936BBC8D39788678D079881726
+:109010002E9B8798C3EE4BC337E64821BA5FF73ED5
+:10902000A77BE72B2BDE5A4976AC81EECF9F9ED7EC
+:1090300070CF3B32E28799B9699C7C05F1E8BBDFD0
+:10904000A7BF4B311DC9E5BE11DA57E6F0EF459DCC
+:10905000174F50FDF9436B77B5E706C57BEF1DE869
+:10906000721400DE0CB59D12500F195AFB1AD5CFA1
+:109070009D9FD5271EA5D5EE69CF0DFAAE5F9AD17B
+:1090800069403F465AED1BF4BE37BDC720BB79FE91
+:109090005E9959267B4BCD534B53F126AD8CFB5B30
+:1090A000A5542E6F3698B87C7343B57815FC5F5B7A
+:1090B00068BE1BE7EB6726F17B1D0CB810F22B6D29
+:1090C000BC5079A6C9019BC2F5C8B4B287B85CD1BF
+:1090D000F205DB42F3E25C73113E427523B5DB9887
+:1090E000A3B6DBC9F5533683492897619F61F344E2
+:1090F00017A87EDADEF2D398663FCE79F343CCCF61
+:10910000FBD1F6632FE35E971C087BDFF636D56E46
+:10911000ED8C082439B81F38ACFE3EA374EAAD05C7
+:109120007DE8AF98578B30EDD55EB8C4BCDA8D6A58
+:10913000BC488B976AF9B5CCE81B87DFF91C65FB47
+:10914000F30D1407ED25AFF61EBB2380F7DCBD152C
+:10915000118ECDECD2FDEB5BA7737E5A5DC0E81992
+:109160001A5F085DF78602DEFE5091F3E1823EE26F
+:109170000A5AFB0F13C3FBE3BE2DE4FB3F775F29C5
+:109180009FEB7D8A4961E1F240B57CF7D0F7600F33
+:109190003D89EBD0CAAEFA34F2DB794C1C6FDD327C
+:1091A000FF9EA0A63FDA507F243DAA85EAA3ABB973
+:1091B0003EA9E959921AD708A527A08F3FE23C8221
+:1091C0008DD3ADA6279EA38FB9401F409743188F1C
+:1091D0002B19D4BCD121569E827EA97AD4F9F6D31C
+:1091E000F7F64BB29FEAB74690FD54BDF92DD4ABCC
+:1091F000D6D5723F61A7BDE62DFCFE81FB3D91F403
+:10920000A6DEFA6B76D447857A3B0AE38A888FF12B
+:10921000369F205F8E7654C0E482F595A31D65C30A
+:10922000BC555700E1166A4F75DDFD05E5BB82BDF3
+:1092300079B820EB1FC01F42FC4B8DD3393EEF1A8B
+:109240007E8AFC26622DB7F7C45A1E0F3596F1B8F8
+:109250008551E17E1433C82374056A7E940D0EBDDA
+:109260001FA52B89FB51E2736BFCA8079A26592492
+:1092700085E423F7AB6879ED632CBEB7F03E862713
+:10928000C3C8300F1D1455B2032D6A7C03FF410B78
+:1092900094579ADF24346FDA16E22709F5A358674A
+:1092A000E9FD268F0AF2BD93619EE7D7E7BD83688B
+:1092B000FB878D8BA3D06FF292AF61A6EA37791846
+:1092C000D7B3E343EE37E9DAC1ED22172A305785E9
+:1092D000C3BFF3E254E407B966DFE12AF483687E92
+:1092E000A8F86A151E6ADC07E18BF014F3393C63B9
+:1092F00042E0E91DA2C58554780EE0F02D2F709252
+:10930000DF4942784A3DF0D4FC54DEBDEDF47D6D7A
+:10931000CB1D16D94DF0FC92EC5513C213E1FF138F
+:10932000FD50E342E039EEE1CC07F03BC1E31F29F9
+:10933000E9C0E7844DB7C5DE00CF495B1F28C127D0
+:109340007B93C709FE7316E75798D91D4C8F636747
+:10935000C8BA3883064F0D0F7BFC778CFCB1E51241
+:10936000F7E797AB789886700BF6E739F470DBA0D7
+:10937000E64B1A736BDC68EF0E0D819B86871E84AB
+:109380001BF2BB18B3EC26FF5D9D80F6506F78385A
+:10939000B4EDC7E1E1FC59AA3DAFC2EDB9F599F7CB
+:1093A00022BC5ED858F20E3E5FF4DD1685F0DABEC0
+:1093B000E58199BDC02D3198CFEF991E1E6E5B8B54
+:1093C0005DD5B3E0FD750E9F91F82CE01BDABD9BD7
+:1093D0009BC659F5F1198D3FE65BC3C98F0BFB970F
+:1093E00096535EA1A76C39F1C7AE73FCB1DB8E79E1
+:1093F0008817CB1F2D85FCBE7D79ED77AF5F077099
+:10940000CDA93D4CF46704FAA373AB3B6C50F33128
+:109410005804C88BF832E6C7F8F12066F545099480
+:109420009F407CD38B79CEF881D2503F85F4C65FC4
+:1094300005220E261812808F63EED4152407EF9FA5
+:109440001586CFAE2B3390FF67B3EA1F944B9D2D4B
+:10945000D84E8B6F2D2B525A67FD347FE1C3D85FF6
+:10946000F31776C6B073FE35FC3E784EED2601F359
+:109470005006D5DD4AF221BE4C61281FB266CAFCF7
+:109480007BB3B912EDF77C7F5B770EDA099D78A389
+:109490003D83F0E077384F67EDE38407572CE5FE16
+:1094A00091CEDAD3B1E1F1A036E2D2FC8C9B757299
+:1094B000D25BCBBF63D26957DE4CFB11783042C51B
+:1094C000034D4EA2BC417C3296051E463FF620C09D
+:1094D00087881494979C1F8BA0FF44C17EC45EFCB8
+:1094E0008F1A3D74C1DA2CFDF09E70683E400DADC0
+:1094F000FB7459B67F621FEBBBE83C00352EE95187
+:10950000E3920B6B79FE6AE71DDFE5E17A4F978105
+:109510007D0070D95CE660787ED340B10AD882E7DE
+:10952000392F6F358074ACC521B578FED662E7114E
+:109530003CD7EB00A712FA635EAF1AEF19A27E07C1
+:109540003A04FF01CF3FC77130DE837240F3A3338B
+:10955000D41BED88DFCA17583FD65C9328117EBB19
+:10956000BA71FC753BEEA4FC851EFF20CF87FBC9BA
+:10957000FEAD6833E5576AFE2DAF9DFBB72A5880D4
+:10958000FE9D3C8A2320DF6EB5D0F71AAA04D98C41
+:10959000EFF717BB8C85A4F738291FD635C72A915A
+:1095A0001F6CE9B644E417E58D22C9EBDEEC92F3BB
+:1095B000E9EC47F21995EE2E81CF0C2EBC383E9384
+:1095C00054A8E733C9853F217EB67E969EBFA0DEB4
+:1095D000590FF3E4A8F4746EDF6A1C1FE3571119E6
+:1095E00041FAA8BADF503A3A4F2FFDBF8FAE66223C
+:1095F0009CC3D0D5ACC21F4757A58503FAA4ABB90D
+:10960000857ABAFA1996FF17D2D5CF691F17A02B02
+:109610006321D3E749C7F2EF3C8F8935F03CCBFF9C
+:10962000C379D25FCDE4FE8BD03C69C66AA85C00EA
+:109630006743E7A3960BC73319E34C964DAFAD1DB7
+:109640002DF3F182FD9D2CC4CFC942FC9AA1FA5D95
+:10965000183FA8CEEFB9F789BFEC1D0D7F3EF9F496
+:109660007F915EBB6FAA40F7C90B477EB71375D0D9
+:10967000A23595EA3C7DFB3DFFD97E4EFC05FB55AE
+:1096800043F7D51875B77A6FE0C7F93999E356FAF9
+:10969000BEF9BA1AE640B85FC8EFB9AE8EE74D6BB7
+:1096A00079CDCE57AA1E2C1DCFF3E9D0EF19EAEFE2
+:1096B000D4F2953DB64AD2F38F2856EE8F0DF1774E
+:1096C00056C6CAB7D03DC6F3FD9DEF16FE03FC9DFE
+:1096D000930A64FE5DC610BF677CBEF261611F7EA7
+:1096E000B3CE1807437E9763F30918AF656733C994
+:1096F000AF33C816A0EF6B95D74E213DF06491EBC8
+:10970000535CA731B7FBAB97C653BE8103870AE50D
+:10971000CBA0671E2FFC27FA09FE597E3E5F01F79A
+:10972000735DECFD791FC23BAB8F7BF472E0912837
+:1097300078FF68BD9DBEAFB552D5A33B4DDD492D29
+:1097400050BFFFAE13BBD13FE16B3330BCDF76B10E
+:10975000FEA3860BE8C5E610FB68C339BDD8F7D673
+:10976000C420BDB86155FE8E6361C6D1F4E29B662C
+:10977000EBF5E2721BD78BCB6DDD26B40FCAE3BECF
+:109780007F1DF34E8DD5AC1DE5E220A586F4E17872
+:1097900089513EF1FF8FCBB37F685CBE78B63E2E19
+:1097A0003F56CD47411E8FDFFFE9D2FCA893B8DEBC
+:1097B000B0C6C8ED15AF02EFC2C4D143E3F243CF48
+:1097C0003E4371F975DBAD748F6FC38E663EDE1458
+:1097D00026619E792253F5B502EE2F0DD53F1E3539
+:1097E00029D694F188EF06BA4F88F704C92FB2DD65
+:1097F000BA09FD4DE9769ECF6DDEFFF256B73148CE
+:109800003F043D94F4E2B2007D97A95C7230E23BE4
+:109810007193FC141FAF1308BF46CCE6F4B330D7E6
+:1098200047FAE1A03249E0F7C4DCDC8E4FE671E78D
+:1098300048C42F682A8EE2715FE980E8C0B8F37DE2
+:10984000D87432DE5F65FC7B15930DF4EF50AC13DA
+:10985000BA13902FB70A4A223E4167A27B8F4FC7A7
+:109860002803F1DF93F22419E8DF93DA93D7988085
+:10987000EB6BAA6F4D40BD70CD6C1E4769CD3B4E62
+:10988000F90FA674D00753E819F6DF1D9DEB14D429
+:10989000BCC0F604FA1E026BF990F06A9499F17F4D
+:1098A000E7C7E15F84F474CC46FAC2AF041FBF2758
+:1098B00064B7D27DBC96CBCC8955B09E66BB99B4BB
+:1098C00009EF65530FA4C0FBE6015234C601BC2961
+:1098D000A912FA8FBC318D6FA21FA439259561BEE4
+:1098E0007F53D9048A9F379D0506033D3DA347EC6E
+:1098F000CF82F76B84007D37C83DD9C0309FB0ED73
+:10990000B2A989C1F7324529544E3A482E88B2810E
+:10991000EEF9896A3C5B3C2F9EAD8F4F7F3F9BEFFA
+:109920005B662DF3E81E689C59C2FD965F56FC21CC
+:10993000DD738B33535E50B989F1EF7E5CC6E85C12
+:1099400042E1E759A58F2B186DFAF5ADC1C034E59A
+:10995000619F5D82F8D18030A53CEEAF96205F6AB2
+:1099600038577F92D747F0F2CED94797A01C941969
+:10997000FFF7491A46F1BCCBF201C5C487CB4D8134
+:10998000B0DFF9BDD07A64E653D4F1D8FFE4786B48
+:109990002E33CFF3A55F78BC9E7301F5F912C6D5BF
+:1099A000DA858E1BDAEF7FAA7D6FFBFC68F6B9FBC8
+:1099B000719407412AA27A9F0DF564A3CA0F3DD97D
+:1099C000137C7E19F9819BD3458C419767FBDFA6F9
+:1099D000F2D6B800800000001F8B080000000000D5
+:1099E000000BCD3B0D545CD599DF9BF7E6CD10669F
+:1099F000E00D0CC910093E082831045F1288A04907
+:109A000079046240A94EF809B825E944A346DBB3BE
+:109A10009DBAD6923DD932094320989009A9256E66
+:109A20006D8BA9D9B5B547A9DBEDAA47BB9398F5CE
+:109A3000F81FDA5AAB7B3C16539BDDF6B83DF42792
+:109A4000969ED336FB7DDF7D0F6626432069F69C0C
+:109A50009D1C72E7BE77EF77EFFDFE7FEE9C3B87A4
+:109A60009F5A8073562B6B2A9865C09F73607DD672
+:109A7000E0736AF93FD0FD0B0114FAE6C047DD4DF3
+:109A8000F1A24AF1BC25404370BE1B4003889F935E
+:109A9000F0A9050F5FBD74AE182014C4877902AC1D
+:109AA000B67006EE4FBB56C7EFF4039C4538B9C6F7
+:109AB0000C1CDE47113040B0C763FF5A35FCEE9DE9
+:109AC000B4EE35601CD367C62BD6BA571F51216E32
+:109AD000CFC7BFCF5AEBFEB4AB353BE499396F6AC1
+:109AE000BB6C3479DE8774065C27E283D163F83D72
+:109AF000FA6E4CE24D3C837FB8DFE84A6D74109FEC
+:109B00003F688FF3E2B822315FC7FD66C0CC47598A
+:109B1000C878B05E428903E7EFBBBAE2519AFFF022
+:109B2000E3C3DFFA363E3EF29D3DBFA4764149C510
+:109B30005035C2CB341C86403B044A900E4EFA8608
+:109B400078F47CEAC814A21FFBC978DA5B7E678CC4
+:109B5000C99748471C7FC77EC9D4703D97C77354C7
+:109B6000A6FDB92593F62B1F5EC4FB0F6C4FA6FB19
+:109B70008864BE1DC0F19103121CC37E8691B00E95
+:109B8000FEA905C9E39B09BF55D44B18871B3F2885
+:109B900041E7581A7C3F1874303D886E9184FD1F50
+:109BA00072EAB7105E0FED932182200FED74012C45
+:109BB00006F846F0DFEFDE5D02F0853E27E37D64C8
+:109BC0009D3A2AE1FB11AFB6B993FA4B1CC6511D61
+:109BD0000463E2B90EAEB88ACF65AF3778ABCEEB8F
+:109BE000C5D6A9F9E0A1719381A097F9E88D2AE281
+:109BF000A3B765E6A3D4FDA7F2DD5C7C5618CCB113
+:109C0000F0300AC115C89EB279E20CEE0FAE763084
+:109C1000FF2CBFDAC1FB3B5B8003A4D9F9B0AF07CF
+:109C200017B87A866F548BEE7BFD2DA708FC6CF37A
+:109C3000D4D171B3A882D685F05839F27320797FD8
+:109C4000F6B8926979F83B5850C9723726E3595DE6
+:109C5000A371132AA81D37256CCB1EBD5FBB90BC1A
+:109C6000B820017E11C1053E7FAAFC3A21C448DC20
+:109C70009359781B9DBF6FA30AB29406DF73F40F4C
+:109C8000EDBCDB24FA473E0F4629EA096720992FED
+:109C9000832F9430FFC80332B8A444FE6A34895E2F
+:109CA0005FBAD539AD7FDCB61E23BA1B45E0C07D57
+:109CB0001D7E4B66BE391CDCFB0B99E4BB51D525E0
+:109CC000DC7F46ECEE87DAF1FDA1D765631087777C
+:109CD0003FB3EB67AF627BBABA788D544C44322302
+:109CE000DB71FCE9F56E63D010F2378D97626E4C34
+:109CF000F79A99F50E5517F37A515C4FBA001F2861
+:109D00008DEA0744875478D3FABAFBF858C3EA04BB
+:109D1000B95A187A2188E71BF2E0263CF4FE24BFEA
+:109D2000874AE4CBFCD9D7418C325E7E465F71DC3A
+:109D30005F5ACD9304A7A9B42A9249E7826C207C8C
+:109D40007CE8356EF4E190F79D86DB289F99DF1B58
+:109D50007342BC9CF080EB62DB0C135B5A88EF4BC8
+:109D60009CAC3F64FF4A7EBEDD1B541CB8AFFF0CA9
+:109D700016F37AF6FC26F8B2721FBEBFD639DA4067
+:109D8000FC11DD0E5A04A76CF3C614EA6FA00DE2B5
+:109D9000C21BF53A7711C26D7C9E1602A8F50DFB29
+:109DA000C90E553C77A42044EB47CC1F95219E7DDE
+:109DB0000255B0DC351EACC7F9BD6FC8C61E7EA209
+:109DC0001D0FE17C252003D1497A6A6D6002F7A35B
+:109DD00078CEBC075900EB26011A12F8A976CA0DF5
+:109DE0000D097AAE0E2127F6EBDDF949E337684518
+:109DF00049EF65308D38D277636059D2386F55A5F9
+:109E000046FB6DD257263DBFB9AC26693E3428A724
+:109E100027B0BF16FF11DD65107D5BAE3CE5D84F66
+:109E200098AF40421FDFFF25E8F59FC9C4CE75708B
+:109E30001DC94F33189D241F68BC8D63889785CF3B
+:109E4000B92732C9909826DB75C9E2CFAA4D454C97
+:109E50001FC973C641F87F0461C8C81715DA848327
+:109E6000E804DA98C4CF516F0C22B2038AC9E3D058
+:109E7000C069511C77056A6F0DFBDE00C4A8BF04E2
+:109E8000623C1E3FB1C335C8166E313FAB058C83B3
+:109E9000F83EB33C2249D8CF69044346781E635C40
+:109EA000A27D6A385F5E492C19E77E41238CF73228
+:109EB0007C730FCDCFEF06AD2F9FF997DF8F7641E3
+:109EC00084F6F32818E092091FA890969216097359
+:109ED0007B25E839A487BE09C62AEA97C204EB2588
+:109EE00034EF12F517C19826947D9CF5374C28BEA7
+:109EF000336EA1FFD3C9CD8CFC2870C6A60B0EBE55
+:109F0000FF56B37C13EAC1CDB7555DD0DF50BA5FC1
+:109F10004C92DFBB37E98C77A57B23CB8BD2FD122C
+:109F2000BF1FD814BC6E133E2755E05E75F1F8AF25
+:109F300050053EA31218E8CB40F4D99B02DBC85F62
+:109F400079D66D94B2C8233E892FAADD93AFD48809
+:109F5000F9440F3FD283F09D530E12E16009D10105
+:109F60009FAB48877D4CC718C32D0C83B1DB5A9734
+:109F7000FAF94807A2CB28680B08AF72F8E2E8C0EC
+:109F80001F84B3E81937FB470AD165E965A1CBA760
+:109F9000098F174B97547AC0AE5C809AB9F5E95790
+:109FA000A57886B494C882F4C1F348481FC26700FC
+:109FB000043DD0AE1B84A774F8A77E4625E87BB885
+:109FC0002FC6133D233533FC9F8DFC2FFA42BE7CF8
+:109FD0004807D11774F293BC603F101CE3F939DBDA
+:109FE0002178209FE86132F26CBBEC8249F66B8BE2
+:109FF0002583E9B55446070DFB9952DC727E46D99C
+:10A00000AE6781C6F4590C616EFDCEC9E3E7485FC7
+:10A010007B1CA391226A9FAEA3757A9B51C390CA01
+:10A02000F70ED7315FDE035A29F25DA16AB2FE2E28
+:10A03000BC4631227A22BEF608BF49378F90BD292F
+:10A04000747861B07266DDA8D308C4905EA7BC675F
+:10A050004E84F0F9827CB4EFC60C9E4F3BC5F908E4
+:10A06000A67C05C983908F4035EEC577BE7E0B2850
+:10A07000826F3D3B107F888FADF402F1240DFC1BF5
+:10A080003F7FA45EE8BBCF6E0A3D4EFC42FA89F1E9
+:10A09000678246FA493380F5A6438FB09F7076C039
+:10A0A000A5139F426CC424BF629BB5CEB601D707EF
+:10A0B0005256C239A3AE243BEED083D9CCCF86040E
+:10A0C000E41FCC77DEA5F23F74E7CDCB0FA87B6A07
+:10A0D0006DF644F9ECE354928FDCC479824EAA3FCA
+:10A0E000C47E874A72923B371C678AFF62C371063F
+:10A0F000820CC769FB2F64B7909E77A1DD1A447C60
+:10A100007FDA448788F972F23FC89EDF1ECE62BFB5
+:10A110008B5184E3EE8849A383C88F774258253E4C
+:10A1200095A02442F4DB1A91D87F2BDEB73D8BFD3E
+:10A130000568D0083F52FC06F9DCF28BC0A385A766
+:10A14000ADF15F3A752FE1D50B3F4F88B7ECF7BF04
+:10A15000EB5A7AAA4A27A5ED2923FA665AF445B59F
+:10A160001D790DF7E9FC53360C6AE4177FE98D5A27
+:10A17000DC5FDF8F6583E2B34C10F1D50210763CD3
+:10A1800093E47429F1CB58FC33C46FDDD91A9DD701
+:10A190001E07D6B80884D83FCE443D40701D99FBB9
+:10A1A000993F33B354DDF6B721F11C6E89FD608F02
+:10A1B000A572F3D4789CE42B0FFDD8DDC9F02511EE
+:10A1C000CF03C7437C0EE9FCF55758FE3ABEAA3BC5
+:10A1D000370FFF3ED57F87C47890C663DC194FC028
+:10A1E000EBB4BC587266EFDBE35193E525659E4DF9
+:10A1F0008F72A7E08FC5187FEDC6FD0E0C1CAD2336
+:10A200007D3392073A469AD0BFF59F248AB3D693FE
+:10A210002E26FBD300A3144778401F2CC3BEB3C027
+:10A22000C3FCB3E8BF83F1CF209CBBAB5D9A8E38F3
+:10A2300059FC91A9D5E1FBBB0ADC8689F48D5AE370
+:10A24000230DE86789E5DF26BFF44E6BBF4C0B9406
+:10A2500043B3A588F95DF1B5ED7D8DE2DEC532C869
+:10A26000A4D7E42E83ECD39D1830E4A2EB0E5F76E6
+:10A27000B2DF87FE1D9FC7D590ECF7DDF58833A9C7
+:10A28000EF4CF1136B5B92FDC0A616E075693FB908
+:10A29000ABFE7AF8E0F1B3FE5CA18C3BB43476D52A
+:10A2A000C6BFF49487F1FF421EE295F32441F37395
+:10A2B000D877211E895F11235955882793BEEAE478
+:10A2C000277FEF3E1AEF3A8BFC4BE3654FC3E788DD
+:10A2D0000E57587802B12F13FFD1BE53FD61578A34
+:10A2E0003F9CBA6F9B0E77D8F859036B083FE89FE5
+:10A2F000B37F609F2BF53CCF637CDE80BCF4831E74
+:10A3000037B7F11E8DDB133D016E4FF6E8D0808E1E
+:10A31000D54B3D65DCBEDC63F0F3577BAAB9B5F1E4
+:10A32000319BBEF1E639D85F38B4CBC17902A55C68
+:10A330007BE56AE2DBB764561F1AE819CA52B643D6
+:10A34000A0E0B82B1B955193CE62C53F8B2C3E5B92
+:10A35000EE9A3CEEC279B17C30F6D044B4DBDB2B14
+:10A3600067E29F75938E1939018A771624E50BEA07
+:10A370002037A95FEFBE2269FC066D69D27B9BBEC8
+:10A38000DFA81372B331B03C69FCA186F5F1BBC9FB
+:10A39000AFAF7169946F68D25727BDBFB9EC8624FF
+:10A3A0007820371BA4A773BA12E8C6E74FA6ABBA4A
+:10A3B000E3C271904DE7D11439988DBEA97C6BE34F
+:10A3C00035671AAF22AE8C525CA9D3B9CBA56D0804
+:10A3D0006A68DA2F3181F24BF6BA4A35C69715977B
+:10A3E0003FBECCA2F8B2285D7CF921E76DE68C2F48
+:10A3F0001B93E3CBAC14BCCD155FBE7A89F8DC5A55
+:10A4000028F26E39AFCBEC07CA8D61B67FB9E3B2E3
+:10A41000B191424FCB1FF392CCE3B8AD552AFB97D5
+:10A420008760220022AF984FF630B7DCC8277DF353
+:10A43000A4CF5C781BC5F94D0EE3284E79B1EE2B05
+:10A4400001F23BF6ED7E34804609FEA7C5C1FA2E27
+:10A450005677660BC995A2A31F27716B8EA6F14F85
+:10A46000ECF176BEF1E016916F3C68E51B0F5AEBFC
+:10A470002042D8DE8E54897CE3AF5B742BFF17E15A
+:10A48000FCE2E12D6BAC7C23F657D07083EDF8A095
+:10A49000D730EF20FEF9850722F8E880A4654964EB
+:10A4A0002FB63834CA1F8F34AE7A97F249FB3CAAD4
+:10A4B00041021FF5ADC927FE92B7A2DB83FDE1C6BD
+:10A4C000E19769BE52EAE07E74CB559C171CC9D354
+:10A4D0009A8A29CEDB504C9806F9993FF5505E23B5
+:10A4E000EA3B13A0F9BDD78BF9B3D12735FF2F93E2
+:10A4F00026A6F8ADC41157118EFCFC993F13BCF38E
+:10A50000F2F3297EC5A04FE5BC6DFE8FF77E2B527E
+:10A5100042AADCE47CF308CA3CE169EB96966C8ABB
+:10A52000A7B63A27F2D2D90B3BFF39ED6FFA93FD6C
+:10A530008454F8FCB1F36B0ED1D5EDBC2D7EA2B7DF
+:10A54000DC381A27BC41ACB198E25E8FB0CBB3E1E6
+:10A5500041F15CB80E22776798190978B0EB1DD7E6
+:10A56000B68A3CB8D1AADB79C6A47A89D2E8E07968
+:10A57000B67EB0F3E3A975127B1F35AD224F7BFD8C
+:10A580000CBCA4BA89BC56B5E0191C17A7E6B3E702
+:10A59000AAA3CC95CF6EB6CE73B175937B5B81E7E2
+:10A5A000FD7FCD7FDFDBFA7F93FF3EBF5E34CAF2D3
+:10A5B00003CF4CFE9CE43BBA6CA13E28EA4349F52C
+:10A5C0009CD43ACE60868033BC52F8A9C3563FB2C1
+:10A5D00042C04DADEF6458799548EB521187812107
+:10A5E00088AC9885C4171EE5BB110DF96181E71091
+:10A5F000F8B075F9B745A8AD2DD487AA715FC3CB64
+:10A600001C6CC786BDA147FB480F2DF3A4958F8313
+:10A61000AD422F0E10DF72FC04A683E44EB2850417
+:10A62000420EA4D708733EC0D1569FC86769B1EAED
+:10A63000DB118F5F25BEC8E3F3F0FC54F85F3B1FCE
+:10A64000FE63C4AF510B38C1D98670BED93A5D479D
+:10A650008CD07BB7B59E5B8F5593BFF058AB26F47B
+:10A66000B0B2D2A0F30FFBD2AFF798B59EE9084B7A
+:10A67000346E5197980F6E31EFA034D9795AD09338
+:10A68000E589D6A7F79946B27E48859B5176E17A4F
+:10A69000D9D3D3FB4F8E870E48E9F7F9634B0E6B86
+:10A6A0000B81ED11F1C59E347C912AEF2AE53F1113
+:10A6B000EE098B0EB6DEF128E3EB332BC9BE83D156
+:10A6C000CB883DCEE7DD93790BC7C97D378B3C87BF
+:10A6D000AA08BD5DD089606AA8BED210E1BAE1FDCA
+:10A6E000A0B97CE7E3E162E33DB2379184F93FB181
+:10A6F000F823B52E18A3BA20F9B15417A4FE4E576B
+:10A70000673ABBFD6E8BD3B2BFE9EB3B47A8BE8374
+:10A71000F38F545BF59DA0A8EFD43DF508ECC4F78A
+:10A72000BF331DECB74ED7771A8AD7480E9623A0B1
+:10A73000FAF47CEB3BB18679D67782175DDFF9635B
+:10A740002BE2E79047D459A6EB3B6DFE79E5757493
+:10A7500088C5BB49AF7401E3C1DB340C3B299F10B2
+:10A760001071C6892A97E0AF9D92159F4103D87A50
+:10A770000A3FCD5DFAC3B9645FDE714129BE5FFF58
+:10A78000C4EB0AF587F31D6B287EBE569D78F05A00
+:10A790007ABFC6C9FAA30E29194FE28FB8CBC145BB
+:10A7A000F0886AB5B268E312B5F5EECC247DBD4100
+:10A7B0004B8E3F86A64EC8D9C49F1A1812E279A8BC
+:10A7C000CE30B349F71813BDF47C68836E0CEAE40D
+:10A7D0000F27C729434DAAD0A745C2EE0C1FD71F8C
+:10A7E00026FFAABF3B83FDCF03050E71EE1218258D
+:10A7F0007E68D293E39AE1B1E27D2524673127E7B1
+:10A80000CBBF3326C66FDFBD7294E252CDF257B78D
+:10A81000E7AF673F14FAC4B89BCB96A79C7F5C2335
+:10A82000BE88ED7402E1BFBFE0F601CA877E1075F5
+:10A83000AE2671196AD3997F6DBA6DEBBB93EB4469
+:10A840007D2A70DD74688BCAFC3F94F7C1913B4848
+:10A850004FE72D603C8F6C51F34309F270A2CDC5D8
+:10A86000F41ED922FC8B3C0784C6D2BC3FD126F40F
+:10A87000D027EF013E4F16DA651D1FE94A38EE2258
+:10A880007C1400FC231D27F0E1437CFE460794E284
+:10A890001687FD5DECBFA5F2D9785B69525CEBAA27
+:10A8A0007624E1D1E90A8639CF7D33E8A4AF1A1ABC
+:10A8B000B14FF17D970AC46FAEC0FD7CCE1CEC6732
+:10A8C00060DFDD188B28D87797845693DFFAE2CEC5
+:10A8D0008E01CAB3B8FC0E8DF8CDD57557B095C6AC
+:10A8E000573A2103DFF7812E05689F1109485FEB76
+:10A8F000106A247F7D38E0D0286FD31C6DDF41EBD8
+:10A9000037FB1700D1796B9383D73B6BAA9CB4CAF2
+:10A91000234783F25F0B3D6C77DF77861FEEC0F134
+:10A92000EF23BD223073AE5D6DC54CA70C3D397E63
+:10A9300076438CEDF05A73BC8BD6595BAD52450310
+:10A940004ED49C3942FEFA4895CB70E1BE466A244B
+:10A95000C6F7C755CE51BAE7F003755CA6757FF010
+:10A9600031F246513AF9BDB0DCA48E1FAA6E7113C4
+:10A970003FEC458A107E22530EB65FA9E3FE6CD1F0
+:10A980007F2FE285F01CC1FD96525C34897285D020
+:10A990007D53C1C7EFC076559BC2E3BE90EF885090
+:10A9A0005DA8BF496539E9F78606E8FE4F3FF23BEF
+:10A9B000C743FE10F3F370BE9FE5D05E67B86673C1
+:10A9C00019F1CB1B5519ECB757B535DE4B7EFB7A29
+:10A9D000F9A37F798AE2A70295E9D9EF0CC65F2532
+:10A9E000BE6E12FEE2C9250FB0DCF575DD0E8437B0
+:10A9F0008884DFA1BA555F650DC3B7F30DC34B441F
+:10AA00003EA9CF7F5F84F21BF16A915F30F38E72B3
+:10AA10003ECFCE2BD5597A6CB92BFC4A29CDBB47FA
+:10AA2000117561B9204AFAC04579259AA724E7BB78
+:10AA3000D64D26C7C18B53E2E0D43C13B8C74B5A5E
+:10AA4000D19E3ED986F1F17298CE2BD111588E2B22
+:10AA50005D1C2F8E548B3828E60CE76BE5E7CBF1B5
+:10AA60009B961F3CDEE3460E00F8518FC6FD2CF38B
+:10AA700037BB7311D45B3D017E7EEBDA47A5C47909
+:10AA80004395ED6E9DF5C64480E0A6EA8B543E5892
+:10AA9000DBB6C0B20F26107D872681F1EBAD5915CC
+:10AAA000273E3DFB7BE038F4130DE31E283E7F7EFE
+:10AAB0009CF6E9A2FC97D8E749DAA78BF25F627FA0
+:10AAC0002FF7E8DCBEDA53C6ED827610797E5B1F85
+:10AAD0005C89FA00F1D65020FA24FF648773FCB732
+:10AAE0000789BF5C014523F97617C4E252823E18FC
+:10AAF000F186DF25BBDC9FE761FE4BDDD7AFDA1CBB
+:10AB0000D6B9C2B711DC21844B787F71E77F3DB4A1
+:10AB100094D6794B66BECAE9DABC83F50EEA850C99
+:10AB2000F637843E8CE57938EF30B2B354A2FB504F
+:10AB30005B770B47774EB9C7754671DE09D4D7D41A
+:10AB4000EF4739A7F3F4D77CF0195AE7E33F2EE03B
+:10AB5000FB4D235BDE66B97F030390DCCB28F7B6A1
+:10AB60009CC5DE5AFC6D117F073B9E11E7673D389F
+:10AB7000E21D8FD1F9FB7F22433ABC5D2A5DC19C67
+:10AB80009F1F32AA4C1E3FE74F53373445DDB07745
+:10AB9000EC7BDC8F34039462FFEB4ED34D7CF0F5FD
+:10ABA000DD8E0BD60DBFBEFBC275C3D12F3BC0A53A
+:10ABB000CDECE30A98E03C2B85F05407ECA357D882
+:10ABC00066B787AE6E673F52D415F51ACA39505F23
+:10ABD0005B40FEF3C026B38CDFFB73D8EE0794B165
+:10ABE00038D9F500D5CB75BABF10E1BA27E567E9CA
+:10ABF000FE42EAF97B9D13EBF97C3884EA95A9F5CE
+:10AC000049C9F37D51DF5F2AEA90767DB2429D38D3
+:10AC1000FA20E1E93637E3A1F7D9EBDFA1FA975D36
+:10AC2000C70F5875606D0768BBC539CC76F2FB9FBE
+:10AC300017F550B81ECFB192169928DEB482EB9B5F
+:10AC40001BE81C73ED7FBE75C3664BBF2173F33DDC
+:10AC5000C89F59F8B4C7FD4DBB90C76B5591B786D7
+:10AC60002C95F5FCFA273C2093BFEC558F929C6CF9
+:10AC700083890D244FBD3EE1B7450F39D96FFB5491
+:10AC8000BBCE74CD534DBEBF90F7F719C66E0413FB
+:10AC90003DAE65511EE92FADE6A7DA791FB1B616B4
+:10ACA000DAC780CCFAEEFDD20D7C8FA949CA66794D
+:10ACB0005434B330515FEE6A4F7F1FA9B670B2852E
+:10ACC000D7F73A80E2AD6886F1B24EF87E4161B8BE
+:10ACD0004D20EE2BC1764D1AC073F67A4E337D6A45
+:10ACE0004B5D2B493FED6A17715BD49B3EAE7BA059
+:10ACF0005DC49F852DA12F101D6E82C97AD26F2849
+:10AD0000DA4684EFB588786D17E94B11EFEE72AC37
+:10AD100099C96BBDE40CEDA2F39ADF11FE842B20E0
+:10AD2000FC7A8CD4381F74ACC5FC0782DB4C7C5E8B
+:10AD3000C98A0A8EAD3C7F1F519B2EED662FC13B09
+:10AD40006CE9E70ACDE4BA6B05388C5E7F425D5D45
+:10AD50009F5F5D5DD2BE2FEAE937083E86E723821A
+:10AD60000FD78346F284FC7798D6B3EF97543CB75D
+:10AD7000A388EB2E9758DF3ED5627E95E0BDB829BB
+:10AD8000F8353AF7FB3B3B80E1CDF3BE466D6138C9
+:10AD900010443AF56708BFF9C93AA3339890FF7990
+:10ADA000D3A2D79B165D97233B8D8B7B6F6CC7AF70
+:10ADB000826A37D12B157E5F0F8C511D68B6F5D591
+:10ADC0007DF7B9294FDC5BB0DE4DF7D1A29EF5D9F6
+:10ADD000D4EF2F3003B47E5F4FE3B31F96121F09E9
+:10ADE000BE8F2C11F98818EAE748429EF4C576997F
+:10ADF000F7555F0071CAA7BB3CC22F7261BCA8AFF8
+:10AE000020BFB99AED393E1FA3D4C16B963CC9A6A9
+:10AE10000126DD172C0089F0853A727A3E99BCFA3A
+:10AE20008230D0BE66832337E07C8A470B34F643FA
+:10AE30007EDDAE313E7DA663268E87F9E3EBD01C26
+:10AE4000F8CA99035FD37C6DC95D2A9ECE109E8897
+:10AE50004F7C0FF0B9E04FF52C672E547854CFFF9C
+:10AE6000C8C68BC7849097C37F89F013A50B36E5BE
+:10AE700033F8455F91F12B6B619EE72A3020B48255
+:10AE8000F0A149848FD4F3573CF77803E1ED956D39
+:10AE900042AFD62A96FE08E359903F6FB2D605CB53
+:10AEA0002E356508BBD30C3FF488BCB6E0D30A74DA
+:10AEB000C7DD39E7EB57BB7D72967BD74F6ECE105F
+:10AEC000FE903EC6FABDB751C0F77A851F7A74600E
+:10AED00015FB0F37E6972E48D48F97BB4E985A171D
+:10AEE0009CAB0E38C337A69BF6F93BEDBE085D95CB
+:10AEF0009B8D3F1E24FE7192DCB8B93DEF7D613021
+:10AF000060905C2D31238074DBEB0B07887FFA8E19
+:10AF1000EF7C87EA24CAEBB241FEA6A20481C6DD1B
+:10AF2000981766F9D8586002D5951EEC31BF9B087A
+:10AF3000F7969650F966A45BA63666121C0FC423DA
+:10AF4000648F6ECA35C3C13474A8DE2CF4C7B196C1
+:10AF5000E02A9A574BBA7315C0C39BCCD5D49FAF88
+:10AF6000BE3A5F9E1ADDA4F72F5D9E5ADC74BEFECA
+:10AF70008220DFD3EAFFA14C1ED6F4B87E4B9EFAA6
+:10AF8000973C00A104B90A6E4ED13B7E4BEFF84DC1
+:10AF9000968BCD9B752B0F1C64F970923C9527E81E
+:10AFA00019BFAD674C9647C56FCB93257F244F1EC5
+:10AFB000BA1F3C594F7E4A1F887B8CA9F2156E0937
+:10AFC0006DD94C762CEFB7AD45FACCFD4F5D17F23D
+:10AFD000D45F60F1FB92A799FFCF22FFD365E15EBA
+:10AFE0004F7112BFDBEDDA2919E2488A755312B7A7
+:10AFF0009F98CAE4B6762A835B732A97DBBA291F27
+:10B00000B7EBA7AEE0B67E2A9FDB8629E4FBD5C866
+:10B01000FF5345DCDE38B59CDB8D53CBB86D9C5AB5
+:10B02000CDE39AA656727BD3D40DDCDE3C5523D6F5
+:10B03000A19A504E5AFEA772D665E07F2342F5D101
+:10B04000BEE3F7BC43F8716A2AE751A2BE355CEF54
+:10B05000712A61E6FFA30542BF6FF408FAA4F2FF6C
+:10B06000B196D0FE74FC0F4E716F4BA17B5B95ECDB
+:10B07000E70C337F9FE7EFBEF447CA83A2FF7198C6
+:10B08000DF5FA2FD9FF62B1726FB95FD79C97E6534
+:10B09000DF12DBAF748D521D6CBBA4F33DB1532D99
+:10B0A000A17FE6F521B88DDE87DADC1AF95351DF8E
+:10B0B0008D010FF6B7EE9581F27DE85F7C8BF80C81
+:10B0C000503F90DD98AFBC3EBCC9D2EFD6F80A38ED
+:10B0D000ED085F847FF23E7DAD395FEE679B67CB05
+:10B0E000FD55509691CECEE638EB85DC6B42EEA353
+:10B0F00005C101CAB74453E4DEB6A3888724B93F2B
+:10B1000065CBBD25C7397E71EF2387E41EF9EA2799
+:10B110009BC579D1DF4EB2A38A35DED928EA5BF52B
+:10B120007EA1579546A12F142DD98E22DFBC4B74DA
+:10B130004995F78822FCE3A6D27F9DB667645773D2
+:10B14000FC3E291B97D67E3F11A13CD6716529CBC9
+:10B1500077AA1C45B555CCE7C7957A4827FFF396E3
+:10B16000239F6D474CB623A9E36C79EA3BDEC47894
+:10B17000B1EDCA713CB799604F366A020F684F3E15
+:10B1800026FE4A95A7DA4233144CB34FB543F8A5CF
+:10B19000AFAD0B0A7F11FD44F253A2CEF47E80DAEC
+:10B1A00021FC9F9C46EBF7153A8473510F3636C647
+:10B1B000EBA98681F2AC7620BC75E6442FC960AF5E
+:10B1C00067D84FFB47F97475FC15F2F9D126E117E2
+:10B1D00042772EFB2D763B17DFDBFE8ECDFFA9E3FA
+:10B1E0009E2C323BD3E1E5F3165E8E0E3C9DC41FD0
+:10B1F00043CAD29B0C3DAD5E358DCBA257E7E757D6
+:10B200001C473BC77A7576BFE2BA8E347C309B5FB1
+:10B21000F1890E91CF45BF621DCDAB2D177EC5E7DD
+:10B220003BE0F2FA0B35F731BE2ED55FD86CF1DF7B
+:10B230006CFE425787AD37C2AC375C96DEB8587F9C
+:10B24000218D7F703BF32F4CCA54FF43541B221FA8
+:10B2500022F408EA99BBE83DC6F1EC2F1CF5087E04
+:10B26000312D3D736D7B7007E175A85AF80B974B34
+:10B270000ED0EFBBAF236FFEF230DF71A58FAD1D97
+:10B2800098203F07BC31BA37DD4BF795287E7CCF3D
+:10B290002BEE11009451DEFF8BF23506D9B991CC1B
+:10B2A0002F7D83C6774714A07B83433D22FFF7C5DC
+:10B2B000055947017967C8197E6AC2CFBF770D1E4D
+:10B2C000C5F60F1985A39070EFF6B0256F2ED8C282
+:10B2D000F774B3B45B9EFD3037DDFEC4FD5CBABAD3
+:10B2E000728E7FD751A0F13D320B3F596A10227EFA
+:10B2F000922307D747D0DB83EA84BC475F4D5727AB
+:10B30000C7C1F922EF25837286F2EF03B49638178E
+:10B310009FB37FB1FB513A970E218677D0EFE0BC07
+:10B320007BFF5A11EFF47BC26E2D8DDED8D7937C54
+:10B33000FF28B595973D16A33BC287038A4169CF85
+:10B34000C1B2CA26CA4F4635AE0083EA7304D3D5CC
+:10B35000A7C72DF9D4C1607BAC7CB2253B9DBDB0A5
+:10B36000DB010BFF76DF5D326612DFA94566907F59
+:10B3700087E3F34B9184BCF11316FCBD9211AF45EA
+:10B3800064EDF50AFDEFD66326FDDEB82FEF2EAE95
+:10B3900033BAF5089CA1E72531F839E9A77C77E7AE
+:10B3A000689A7DBCD521E294BDCE10AFB7375FE17E
+:10B3B000FAE3DEA2F4F9ACE73B441E49F5AD0F72A7
+:10B3C0005EDFA7709D3875DC53169FF4AB6640E3D3
+:10B3D000B8FA81323A577409708E72EC9D379FD853
+:10B3E0008DFDFD3D41CE7B0C51FE0385B5BFF05E6A
+:10B3F000C6FBFE6B1C1A9D6383FC11DF47385C0D96
+:10B4000006E98FEC6A1C9710471E86D101BA0F77A8
+:10B41000782D70BED46B0493DEF723038E93FFA5C3
+:10B420004CB03E734237D7010EF855BEA73354795E
+:10B430009AFD231DC6394F315429E865D793FC1670
+:10B440003FFAFD773527CAC1018B6E0F52DE9CEFA4
+:10B45000318D41A2FF75A0709CEDF38175E39D5481
+:10B4600017CCF2BB0D0A45F6D70481E474A8CA9143
+:10B47000F67ED450D569DE67EA7E9C277EC9FA2F16
+:10B480004B99E0FC4456D96FD9AE3C64ED63E35A66
+:10B49000E0CD66570B3D9BDD1606FA7D58DE5BF26C
+:10B4A000A88EFDDD85BF8A38493E6E0358A4D37E41
+:10B4B0002778BF879B9F8EF3FEACFBBA203FCFF768
+:10B4C000712128E4D7BE77BDB04D4D8ADFB352EE6F
+:10B4D0004565A6F441EEBAE07DB2EEF7EE3975327D
+:10B4E00001DEA2CEE4FBD973CDFF43CF8E5327916B
+:10B4F0005F0E575E58BE0E59758D584F35D3C9E64D
+:10B50000339BEFB2E88839B3CF1FF28D75A6B3C372
+:10B510001D9D420E52F93195FF34D718DBF143EBF4
+:10B5200092E1DCD029E4F8060B4E4EA19E4FEFEDE0
+:10B530007B4C747FEAE934EB7EBA53E5F1337C6DE2
+:10B54000DBF9772ECDCE2F6B1176DEBF2A83EC3C54
+:10B55000E2F365BAC7F67B940F4890EB3E6FB29F5B
+:10B5600069DBF9C73B457CF062DE5512D9E91CCF97
+:10B5700004FBBF59D5C97980543BAD3A431C37AA67
+:10B58000F9AAAD6FB89EF55AC7FB4F4410CEFEF82E
+:10B590003EAE0F6522FF66484CA7483A3A4179F221
+:10B5A000BD9AF24E10BF63D3855EC85AAB70BD63BF
+:10B5B000C8F15EF587D82AB130042DB883CCB7FB2B
+:10B5C000C7F97E8EC5F773D1933E7F5A63FD2E85F2
+:10B5D000EA88F56F56A78B2BEC96EE4F25DF77BFE9
+:10B5E00038B9F8FB4EABBE9C0119422E9A1D7D6402
+:10B5F000EF9B1D7C2F85AEEF2A6BACD201D5F56990
+:10B6000067F8DE4FF77F24AB5EB474465EE0567198
+:10B61000AFE5EC0E714F867F47B8947EF739C1BF16
+:10B620000FBC926EB1CAEC07B3DC9C850207D583D0
+:10B6300023272469DA0FBA82AE341A0E9A570241D0
+:10B640006E53F77D1584F97919C4B8BD06C6B82DB7
+:10B6500087716E2B60925B9326E07E8D93A2AEB1D4
+:10B660000A0C999E574290DB3510E6B61A62DC7ED2
+:10B67000A5FE6F7F733B4EF9DA797811784D23DFA1
+:10B6800071043A7D7E1BCFAD9D3AF3C95CF4EEF3B5
+:10B690004DB01F5F5F3DCE7EA8D71364FE76FA05DE
+:10B6A0007FDB709CB3E4836D3F49253F69751AFECB
+:10B6B0009DC34F4AFD1DC9FF0229F7D0B3D04500F5
+:10B6C0000000000000000000000000180000000062
+:10B6D000000000000000004000000000000000002A
+:10B6E0000000002800000000000000000000001022
+:10B6F000000000000000000000000020000000002A
+:10B700000000000000000010000000000000000029
+:10B710000000000800000000000000000000000021
+:10B7200000000000000000000000003900000000E0
+:10B7300000000000000000380000000000000000D1
+:10B7400000000000000000000000000000000008F1
+:10B7500000000000000000000000000000000000E9
+:10B76000000000000000000C0000000000000000CD
+:10B770000000000E000000000000000000000004B7
+:10B7800000000000000000000000001800000000A1
+:10B79000000000000000001C00000000000000008D
+:10B7A0000000001C0000000000000000000000136A
+:10B7B00000000000000000000000003A000000004F
+:10B7C0000000000000000001000000000000000078
+:10B7D0000000000200000000000000000000000166
+:10B7E0000000000000000000000000100000000049
+:10B7F00000000000000000500000000000000000F9
+:10B800000000000000000000000000000000000335
+:10B810000000000000000000000000AB000000007D
+:10B820000000000000000008000000000000000010
+:10B830000000C00000100000000000080000C00868
+:10B8400000100000000000020000C0000010000016
+:10B850000000001000009FB0000000000000000881
+:10B860000000C08000100000000000040000C0883C
+:10B8700000100000000000020000C0800010000066
+:10B8800000000010000091200000000000000008EF
+:10B8900000009340000100040000000100009348F4
+:10B8A00000000000000000020000935000000000B3
+:10B8B0000000000800009354000000000000000297
+:10B8C00000009418000000000000000800009358D9
+:10B8D000000800000000000800009AB000400000CE
+:10B8E00000000040000093980008000000000008DD
+:10B8F000000093D800080000000000080000942019
+:10B9000000C8000000000098000095B000980000FA
+:10B9100000000028000095F00098000000000028BA
+:10B920000000C480054000300000054000009D205C
+:10B93000000800000000000100009D210008000038
+:10B9400000000001000020080010000000000010AE
+:10B9500000002000000000000000000800009CD84B
+:10B96000000800000000000200009D180000000018
+:10B9700000000001000000010000000000000000C5
+:10B9800000000009000000000000000000000002AC
+:10B9900000000000000000000000CF2000000000B8
+:10B9A000000000200000CF46000000000000000161
+:10B9B0000000600000200000000000200000730074
+:10B9C000000800000000000800009FA00000000028
+:10B9D0000000000100009FA800000000000000011E
+:10B9E00000009F60000000000000001000009F6346
+:10B9F000000000000000000100009F610000000046
+:10BA00000000000100009F6600000000000000012F
+:10BA100000009F67000000000000000000009F6819
+:10BA2000000000000000000400009F6C0000000007
+:10BA300000000004000000520000000000000000B0
+:10BA400000000003000000000000000000000003F0
+:10BA500000000000000000000000000500000000E1
+:10BA600000000000000000020000000000000000D4
+:10BA700000060000000000000000002000009F7091
+:10BA8000000000000000000100009F900000000086
+:10BA9000000000080000005300000000000000004B
+:10BAA00000009F98000000000000000200009F9C22
+:10BAB000000000000000000100009F9D0000000049
+:10BAC000000000010000000900000000000000006C
+:10BAD0000000000100000000000000000000004421
+:10BAE0000000000000000000000000010000000055
+:10BAF00000000000000000500000000000000000F6
+:10BB0000000000890000000000000000000012C8D2
+:10BB10000080000000000080000000010000000024
+:10BB2000000000000000A000071000000000071047
+:10BB300000001AC800000000000000080000AEC0AD
+:10BB400000080000000000080000AE4000080000EF
+:10BB5000000000080000AE8000080000000000089F
+:10BB6000000020080010000000000010000020006D
+:10BB700000000000000000080000A01007100040B6
+:10BB80000000004000001BF8000800000000000159
+:10BB900000001BF9000800000000000100001AD09E
+:10BBA000000000000000000100001AD800000000A2
+:10BBB0000000000200001ADA00000000000000028D
+:10BBC0008000000000000000000000000000AF0046
+:10BBD000000000000000002000001B78002800008A
+:10BBE000000000040000E000002000000000002031
+:10BBF0000000F300000800000000000800001AF038
+:10BC0000000000000000010800001B3700000000D9
+:10BC10000000000100001B0F0000000000000001F8
+:10BC200000001B70000000000000000400001B74F6
+:10BC300000000000000000040000005000000000B0
+:10BC400000000000000000030000000000000000F1
+:10BC500000000005000000000000000000000006D9
+:10BC600000000000000000000000000700000000CD
+:10BC70000000000000001BC80000000000000001E0
+:10BC800000001BE800000000000000080000005158
+:10BC9000000000000000000000001BD000000000B9
+:10BCA0000000000400001BD400000000000000049D
+:10BCB00000001BD8000000000000000400001BDC96
+:10BCC00000000000000000080000B00000180000A4
+:10BCD000000000180000C00000400000000000400C
+:10BCE0000000C00000400002000000010000C00190
+:10BCF00000400002000000000000E2000020000000
+:10BD0000000000200000E204000200080020000201
+:10BD10008000000000000000000000000000E200C1
+:10BD200000080020000000040000F40000280000CB
+:10BD3000000000280000F540001000000000001086
+:10BD40000000F5C000200000000000200000F5C049
+:10BD500000020020000000020000F30000200000AC
+:10BD6000000000200000200800100000000000106B
+:10BD70000000200000000000000000080000110882
+:10BD80000008000000000008000011680008000022
+:10BD900000000008000011A80008000000000008D2
+:10BDA00000001240000800000000000100001241E5
+:10BDB0000008000000000001000040000020000416
+:10BDC00000000010000059000030001800000010B2
+:10BDD0000000590800300018000000020000570061
+:10BDE00000080000000000010000570100080000EA
+:10BDF00000000001000011E8000000000000000148
+:10BE0000000011F00000000000000001000011F827
+:10BE100000000000000000100000124400080000B4
+:10BE2000000000040000400000200000000000208E
+:10BE30000000530000100000000000100000153842
+:10BE400000000000000000010000000300000000EE
+:10BE500000000000000000000000000000000000E2
+:10BE600000000001000000000000000000000004CD
+:10BE700000000000000000000000150800000000A5
+:10BE8000000000010000152800000000000000086C
+:10BE900000000050000000000000000000008308C7
+:10BEA0000080000000000080000000010000000091
+:10BEB000000000000000200800100000000000103A
+:10BEC00000002000000000000000000800008410B6
+:10BED0000008000000000008000084700008000056
+:10BEE0000000000800060000046000280000046054
+:10BEF00000008520000800000000000100008521EE
+:10BF000000080000000000018000000000000000A8
+:10BF10000000000000008408000000000000000194
+:10BF2000000084F40008000000000002000084F615
+:10BF3000000800000000000200008504001000005E
+:10BF400000000004000087600000000000000020E6
+:10BF500000006000002000000000002000007300CE
+:10BF600000080000000000080000000300000000BE
+:10BF700000000000000000050000000000000000BC
+:10BF800000000006000000000000000000000007A4
+:10BF90000000000000000000000088080000000011
+:10BFA00000000001000088280000000000000008D8
+:10BFB0000000005000000000000000000000881099
+:10BFC00000000000000000040000881400000000D1
+:10BFD00000000004000088180000000000000004B9
+:10BFE0000000881C00000000000000080000300075
+:10BFF0000040000000000008000030080040000081
+:10C00000000000280000339001C00010000000086C
+:10C010000000320000200000000000200000372057
+:10C02000000000000000000800001020062000387A
+:10C03000000000080000A000000000000000200038
+:10C0400000003EA9000000000000000100003EC802
+:10C05000000000000000000280000000000000005E
+:10C060000000000000006000002000000000000848
+:10C070000000400000080000000000010000400136
+:10C08000000800000000000100004040000800041B
+:10C0900000000002000040600008000400000004EE
+:10C0A0000000400000080000000000040000400400
+:10C0B00000080000000000040000404000000000F4
+:10C0C00000000008000040480000000000000008D8
+:10C0D0000000800000000000000000100000504040
+:10C0E00000010004000000010000500000000000FA
+:10C0F00000000020000050080010000000000004B4
+:10C100000000500C0010000000000001000052C7A9
+:10C110000000000000000001000052C60000000006
+:10C120000000000100003000003000180000000492
+:10C130000000300400300018000000040000300847
+:10C1400000300018000000020000300A0030001823
+:10C15000000000020000300C003000180000000158
+:10C160000000300D00300018000000010000300E0B
+:10C1700000300018000000010000301000300018EE
+:10C18000000000040000301400300018000000041B
+:10C19000000050000100008000080004000050046E
+:10C1A00001000080000800040000000A00000000F8
+:10C1B0000000000000005068010000800000000145
+:10C1C0000000506901000080000000010000506C78
+:10C1D00001000080000000020000506E010000809D
+:10C1E0000000000200005070010000800000000408
+:10C1F0000000507401000080000000040000506640
+:10C200000100008000000002000050640100008076
+:10C2100000000001000050600100008000000002EA
+:10C220000000506201000080000000020000505039
+:10C230000100008000000004000050540100008054
+:10C2400000000004000050580100008000000004BD
+:10C250000000505C01000080000000040000507CE1
+:10C2600001000080000000010000507D01000080FE
+:10C270000000000100004018001000000000000451
+:10C2800000004090001000000000000400004098F2
+:10C290000010000000000004000041100000000039
+:10C2A0000000000200004112000000000000000237
+:10C2B00000004114000000000000000200004116D0
+:10C2C00000000000000000020000604000080000C4
+:10C2D00000000002000060420008000000000002B0
+:10C2E00000006044000800000000000400006080BE
+:10C2F0000008000000000008000060C000400008C6
+:10C3000000000008000060000008000000000002BB
+:10C31000000060020008000000000001000060044E
+:10C320000008000000000002000063400008000058
+:10C330000000000800006380000800000000000406
+:10C34000000063840008000000000001000063C0DA
+:10C350000008000000000002000063C400080000A4
+:10C36000000000020000640000080000000000045B
+:10C3700000007000001000000000000400007004C5
+:10C380000010000000000004000070080010000011
+:10C3900000000004000090000008000000000002FF
+:10C3A000000090020008000000000001000090045E
+:10C3B000000800000000000200009040000800009B
+:10C3C000000000020000904400080000000000028D
+:10C3D000000090460008000000000002000096489F
+:10C3E0000008000000000008000090800008000025
+:10C3F000000000020000908400080000000000021D
+:10C40000000096880008000000000008000080403E
+:10C41000000800000000000100008041000800004A
+:10C420000000000100008042000800000000000140
+:10C4300000008043000800000000000100008000B0
+:10C440000008000000000002000080020008000058
+:10C45000000000010000800400080000000000024D
+:10C46000000080C00008000000000002000080C240
+:10C470000008000000000002000080C40008000066
+:10C4800000000002000080800008000000000001A1
+:10C490000000808100080000000000010000808290
+:10C4A0000008000000000001000080830008000078
+:10C4B000000000010000808400080000000000016E
+:10C4C0000000808500080000000000010000808658
+:10C4D00000080000000000010000600000080000EB
+:10C4E00000000002000060020008000000000001DF
+:10C4F000000060040008000000000002000060422C
+:10C5000000C00018000000020000604000C00018D9
+:10C51000000000020000604C00C00018000000088D
+:10C520000000604400C000180000000800006057D0
+:10C5300000C00018000000010000605400C0001896
+:10C54000000000020000605600C00018000000015A
+:10C55000000066400008000000000008000066803F
+:10C560000008000000000008000066C0000800008D
+:10C57000000000080000DA4200180000000000027D
+:10C580000000DE4000000000000000000000E000AD
+:10C5900000000000000000040000D0C00000000007
+:10C5A000000000040000D0C40000000000000004EF
+:10C5B0000000D0C800000000000000040000D0CC43
+:10C5C00000000000000000040000D0D000000000C7
+:10C5D000000000040000D0D40000000000000004AF
+:10C5E0000000D0D800000000000000040000D0C00F
+:10C5F00000000000000000200000DB000000000040
+:10C60000000000040000DB000000000000000068E3
+:10C610000000B94800000000000000000000D00049
+:10C6200000000000000000040000B0C00000000096
+:10C63000000000040000B0C400000000000000047E
+:10C640000000B0C800000000000000040000B0C0FE
+:10C6500000000000000000100000D6B00000000044
+:10C66000000000040000D6B4000000000000000438
+:10C670000000D6B800000000000000040000D6BC96
+:10C6800000000000000000040000D6B00000000020
+:10C69000000000100000D348000000000000000867
+:10C6A0000000D358000000000000008000000010CF
+:10C6B00000000000000000000000D358000000004F
+:10C6C0000000000800000000060209000000000051
+:00000001FF
diff --git a/fs/9p/fid.c b/fs/9p/fid.c
index 0ee594569dc..85b67ffa2a4 100644
--- a/fs/9p/fid.c
+++ b/fs/9p/fid.c
@@ -286,11 +286,9 @@ static struct p9_fid *v9fs_fid_clone_with_uid(struct dentry *dentry, uid_t uid)
 
 struct p9_fid *v9fs_writeback_fid(struct dentry *dentry)
 {
-	int err, flags;
+	int err;
 	struct p9_fid *fid;
-	struct v9fs_session_info *v9ses;
 
-	v9ses = v9fs_dentry2v9ses(dentry);
 	fid = v9fs_fid_clone_with_uid(dentry, 0);
 	if (IS_ERR(fid))
 		goto error_out;
@@ -299,17 +297,8 @@ struct p9_fid *v9fs_writeback_fid(struct dentry *dentry)
 	 * dirty pages. We always request for the open fid in read-write
 	 * mode so that a partial page write which result in page
 	 * read can work.
-	 *
-	 * we don't have a tsyncfs operation for older version
-	 * of protocol. So make sure the write back fid is
-	 * opened in O_SYNC mode.
 	 */
-	if (!v9fs_proto_dotl(v9ses))
-		flags = O_RDWR | O_SYNC;
-	else
-		flags = O_RDWR;
-
-	err = p9_client_open(fid, flags);
+	err = p9_client_open(fid, O_RDWR);
 	if (err < 0) {
 		p9_client_clunk(fid);
 		fid = ERR_PTR(err);
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index 9665c2b840e..e5ebedfc5ed 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -116,7 +116,6 @@ struct v9fs_session_info {
 	struct list_head slist; /* list of sessions registered with v9fs */
 	struct backing_dev_info bdi;
 	struct rw_semaphore rename_sem;
-	struct p9_fid *root_fid; /* Used for file system sync */
 };
 
 /* cache_validity flags */
diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c
index b6a3b9f7fe4..e022890c6f4 100644
--- a/fs/9p/vfs_dentry.c
+++ b/fs/9p/vfs_dentry.c
@@ -126,7 +126,9 @@ static int v9fs_lookup_revalidate(struct dentry *dentry, struct nameidata *nd)
 			retval = v9fs_refresh_inode_dotl(fid, inode);
 		else
 			retval = v9fs_refresh_inode(fid, inode);
-		if (retval <= 0)
+		if (retval == -ENOENT)
+			return 0;
+		if (retval < 0)
 			return retval;
 	}
 out_valid:
diff --git a/fs/9p/vfs_inode_dotl.c b/fs/9p/vfs_inode_dotl.c
index ffbb113d5f3..82a7c38ddad 100644
--- a/fs/9p/vfs_inode_dotl.c
+++ b/fs/9p/vfs_inode_dotl.c
@@ -811,7 +811,7 @@ v9fs_vfs_follow_link_dotl(struct dentry *dentry, struct nameidata *nd)
 	fid = v9fs_fid_lookup(dentry);
 	if (IS_ERR(fid)) {
 		__putname(link);
-		link = ERR_PTR(PTR_ERR(fid));
+		link = ERR_CAST(fid);
 		goto ndset;
 	}
 	retval = p9_client_readlink(fid, &target);
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index f3eed3383e4..feef6cdc1fd 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -154,6 +154,7 @@ static struct dentry *v9fs_mount(struct file_system_type *fs_type, int flags,
 		retval = PTR_ERR(inode);
 		goto release_sb;
 	}
+
 	root = d_alloc_root(inode);
 	if (!root) {
 		iput(inode);
@@ -185,21 +186,10 @@ static struct dentry *v9fs_mount(struct file_system_type *fs_type, int flags,
 		p9stat_free(st);
 		kfree(st);
 	}
-	v9fs_fid_add(root, fid);
 	retval = v9fs_get_acl(inode, fid);
 	if (retval)
 		goto release_sb;
-	/*
-	 * Add the root fid to session info. This is used
-	 * for file system sync. We want a cloned fid here
-	 * so that we can do a sync_filesystem after a
-	 * shrink_dcache_for_umount
-	 */
-	v9ses->root_fid = v9fs_fid_clone(root);
-	if (IS_ERR(v9ses->root_fid)) {
-		retval = PTR_ERR(v9ses->root_fid);
-		goto release_sb;
-	}
+	v9fs_fid_add(root, fid);
 
 	P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
 	return dget(sb->s_root);
@@ -210,11 +200,15 @@ close_session:
 	v9fs_session_close(v9ses);
 	kfree(v9ses);
 	return ERR_PTR(retval);
+
 release_sb:
 	/*
-	 * we will do the session_close and root dentry
-	 * release in the below call.
+	 * we will do the session_close and root dentry release
+	 * in the below call. But we need to clunk fid, because we haven't
+	 * attached the fid to dentry so it won't get clunked
+	 * automatically.
 	 */
+	p9_client_clunk(fid);
 	deactivate_locked_super(sb);
 	return ERR_PTR(retval);
 }
@@ -232,7 +226,7 @@ static void v9fs_kill_super(struct super_block *s)
 	P9_DPRINTK(P9_DEBUG_VFS, " %p\n", s);
 
 	kill_anon_super(s);
-	p9_client_clunk(v9ses->root_fid);
+
 	v9fs_session_cancel(v9ses);
 	v9fs_session_close(v9ses);
 	kfree(v9ses);
@@ -285,14 +279,6 @@ done:
 	return res;
 }
 
-static int v9fs_sync_fs(struct super_block *sb, int wait)
-{
-	struct v9fs_session_info *v9ses = sb->s_fs_info;
-
-	P9_DPRINTK(P9_DEBUG_VFS, "v9fs_sync_fs: super_block %p\n", sb);
-	return p9_client_sync_fs(v9ses->root_fid);
-}
-
 static int v9fs_drop_inode(struct inode *inode)
 {
 	struct v9fs_session_info *v9ses;
@@ -307,6 +293,51 @@ static int v9fs_drop_inode(struct inode *inode)
 	return 1;
 }
 
+static int v9fs_write_inode(struct inode *inode,
+			    struct writeback_control *wbc)
+{
+	int ret;
+	struct p9_wstat wstat;
+	struct v9fs_inode *v9inode;
+	/*
+	 * send an fsync request to server irrespective of
+	 * wbc->sync_mode.
+	 */
+	P9_DPRINTK(P9_DEBUG_VFS, "%s: inode %p\n", __func__, inode);
+	v9inode = V9FS_I(inode);
+	if (!v9inode->writeback_fid)
+		return 0;
+	v9fs_blank_wstat(&wstat);
+
+	ret = p9_client_wstat(v9inode->writeback_fid, &wstat);
+	if (ret < 0) {
+		__mark_inode_dirty(inode, I_DIRTY_DATASYNC);
+		return ret;
+	}
+	return 0;
+}
+
+static int v9fs_write_inode_dotl(struct inode *inode,
+				 struct writeback_control *wbc)
+{
+	int ret;
+	struct v9fs_inode *v9inode;
+	/*
+	 * send an fsync request to server irrespective of
+	 * wbc->sync_mode.
+	 */
+	P9_DPRINTK(P9_DEBUG_VFS, "%s: inode %p\n", __func__, inode);
+	v9inode = V9FS_I(inode);
+	if (!v9inode->writeback_fid)
+		return 0;
+	ret = p9_client_fsync(v9inode->writeback_fid, 0);
+	if (ret < 0) {
+		__mark_inode_dirty(inode, I_DIRTY_DATASYNC);
+		return ret;
+	}
+	return 0;
+}
+
 static const struct super_operations v9fs_super_ops = {
 	.alloc_inode = v9fs_alloc_inode,
 	.destroy_inode = v9fs_destroy_inode,
@@ -314,17 +345,18 @@ static const struct super_operations v9fs_super_ops = {
 	.evict_inode = v9fs_evict_inode,
 	.show_options = generic_show_options,
 	.umount_begin = v9fs_umount_begin,
+	.write_inode = v9fs_write_inode,
 };
 
 static const struct super_operations v9fs_super_ops_dotl = {
 	.alloc_inode = v9fs_alloc_inode,
 	.destroy_inode = v9fs_destroy_inode,
-	.sync_fs = v9fs_sync_fs,
 	.statfs = v9fs_statfs,
 	.drop_inode = v9fs_drop_inode,
 	.evict_inode = v9fs_evict_inode,
 	.show_options = generic_show_options,
 	.umount_begin = v9fs_umount_begin,
+	.write_inode = v9fs_write_inode_dotl,
 };
 
 struct file_system_type v9fs_fs_type = {
diff --git a/fs/adfs/map.c b/fs/adfs/map.c
index d1a5932bb0f..6935f05202a 100644
--- a/fs/adfs/map.c
+++ b/fs/adfs/map.c
@@ -51,7 +51,7 @@ static DEFINE_RWLOCK(adfs_map_lock);
 
 /*
  * This is fun.  We need to load up to 19 bits from the map at an
- * arbitary bit alignment.  (We're limited to 19 bits by F+ version 2).
+ * arbitrary bit alignment.  (We're limited to 19 bits by F+ version 2).
  */
 #define GET_FRAG_ID(_map,_start,_idmask)				\
 	({								\
diff --git a/fs/afs/cache.c b/fs/afs/cache.c
index 0fb315dd4d2..577763c3d88 100644
--- a/fs/afs/cache.c
+++ b/fs/afs/cache.c
@@ -98,7 +98,7 @@ static uint16_t afs_cell_cache_get_key(const void *cookie_netfs_data,
 }
 
 /*
- * provide new auxilliary cache data
+ * provide new auxiliary cache data
  */
 static uint16_t afs_cell_cache_get_aux(const void *cookie_netfs_data,
 				       void *buffer, uint16_t bufmax)
@@ -117,7 +117,7 @@ static uint16_t afs_cell_cache_get_aux(const void *cookie_netfs_data,
 }
 
 /*
- * check that the auxilliary data indicates that the entry is still valid
+ * check that the auxiliary data indicates that the entry is still valid
  */
 static enum fscache_checkaux afs_cell_cache_check_aux(void *cookie_netfs_data,
 						      const void *buffer,
@@ -150,7 +150,7 @@ static uint16_t afs_vlocation_cache_get_key(const void *cookie_netfs_data,
 }
 
 /*
- * provide new auxilliary cache data
+ * provide new auxiliary cache data
  */
 static uint16_t afs_vlocation_cache_get_aux(const void *cookie_netfs_data,
 					    void *buffer, uint16_t bufmax)
@@ -172,7 +172,7 @@ static uint16_t afs_vlocation_cache_get_aux(const void *cookie_netfs_data,
 }
 
 /*
- * check that the auxilliary data indicates that the entry is still valid
+ * check that the auxiliary data indicates that the entry is still valid
  */
 static
 enum fscache_checkaux afs_vlocation_cache_check_aux(void *cookie_netfs_data,
@@ -283,7 +283,7 @@ static void afs_vnode_cache_get_attr(const void *cookie_netfs_data,
 }
 
 /*
- * provide new auxilliary cache data
+ * provide new auxiliary cache data
  */
 static uint16_t afs_vnode_cache_get_aux(const void *cookie_netfs_data,
 					void *buffer, uint16_t bufmax)
@@ -309,7 +309,7 @@ static uint16_t afs_vnode_cache_get_aux(const void *cookie_netfs_data,
 }
 
 /*
- * check that the auxilliary data indicates that the entry is still valid
+ * check that the auxiliary data indicates that the entry is still valid
  */
 static enum fscache_checkaux afs_vnode_cache_check_aux(void *cookie_netfs_data,
 						       const void *buffer,
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index 0d5eeadf612..3c090b7555e 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -293,7 +293,7 @@ struct afs_cell *afs_cell_lookup(const char *name, unsigned namesz,
 		if (!cell) {
 			/* this should not happen unless user tries to mount
 			 * when root cell is not set. Return an impossibly
-			 * bizzare errno to alert the user. Things like
+			 * bizarre errno to alert the user. Things like
 			 * ENOENT might be "more appropriate" but they happen
 			 * for other reasons.
 			 */
diff --git a/fs/attr.c b/fs/attr.c
index 1007ed61631..91dbe2a107f 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -128,7 +128,7 @@ EXPORT_SYMBOL(inode_newsize_ok);
  * setattr_copy must be called with i_mutex held.
  *
  * setattr_copy updates the inode's metadata with that specified
- * in attr. Noticably missing is inode size update, which is more complex
+ * in attr. Noticeably missing is inode size update, which is more complex
  * as it requires pagecache updates.
  *
  * The inode is not marked as dirty after this operation. The rationale is
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 96804a17bbd..f55ae23b137 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -612,7 +612,7 @@ static int autofs4_dir_unlink(struct inode *dir, struct dentry *dentry)
  * set the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags on the leaves
  * of the directory tree. There is no need to clear the automount flag
  * following a mount or restore it after an expire because these mounts
- * are always covered. However, it is neccessary to ensure that these
+ * are always covered. However, it is necessary to ensure that these
  * flags are clear on non-empty directories to avoid unnecessary calls
  * during path walks.
  */
diff --git a/fs/befs/ChangeLog b/fs/befs/ChangeLog
index ce8c787916b..75a461cfaca 100644
--- a/fs/befs/ChangeLog
+++ b/fs/befs/ChangeLog
@@ -24,7 +24,7 @@ Version 0.9 (2002-03-14)
 
 Version 0.64 (2002-02-07)
 ==========
-* Did the string comparision really right this time (btree.c) [WD]
+* Did the string comparison really right this time (btree.c) [WD]
 
 * Fixed up some places where I assumed that a long int could hold
 	a pointer value. (btree.c) [WD]
@@ -114,7 +114,7 @@ Version 0.6 (2001-12-15)
 	More flexible. Will soon be controllable at mount time 
 	(see TODO). [WD]
 
-* Rewrote datastream positon lookups.
+* Rewrote datastream position lookups.
 	(datastream.c) [WD]
 
 * Moved the TODO list to its own file.
@@ -150,7 +150,7 @@ Version 0.50 (2001-11-13)
 * Anton also told me that the blocksize is not allowed to be larger than 
 	the page size in linux, which is 4k i386. Oops. Added a test for 
 	(blocksize > PAGE_SIZE), and refuse to mount in that case. What this 
-	practicaly means is that 8k blocksize volumes won't work without a major
+	practically means is that 8k blocksize volumes won't work without a major
 	restructuring of the driver (or an alpha or other 64bit hardware). [WD]
 
 * Cleaned up the befs_count_blocks() function. Much smarter now. 
@@ -183,7 +183,7 @@ Version 0.45 (2001-10-29)
 	structures into the generic pointer fields of the public structures 
 	with kmalloc(). put_super and put_inode free them. This allows us not 
 	to have to touch the definitions of the public structures in 
-	include/linux/fs.h. Also, befs_inode_info is huge (becuase of the 
+	include/linux/fs.h. Also, befs_inode_info is huge (because of the 
 	symlink string). (super.c, inode.c, befs_fs.h) [WD]
 
 * Fixed a thinko that was corrupting file reads after the first block_run 
@@ -404,7 +404,7 @@ Version 0.4 (2001-10-28)
 
 * Fixed compile errors on 2.4.1 kernel (WD)
 	Resolve rejected patches
-	Accomodate changed NLS interface (util.h)
+	Accommodate changed NLS interface (util.h)
 	Needed to include <linux/slab.h> in most files
 	Makefile changes
 	fs/Config.in changes
diff --git a/fs/befs/befs_fs_types.h b/fs/befs/befs_fs_types.h
index 7893eaa1e58..eb557d9dc8b 100644
--- a/fs/befs/befs_fs_types.h
+++ b/fs/befs/befs_fs_types.h
@@ -234,7 +234,7 @@ typedef struct {
 } PACKED befs_btree_super;
 
 /*
- * Header stucture of each btree node
+ * Header structure of each btree node
  */
 typedef struct {
 	fs64 left;
diff --git a/fs/befs/btree.c b/fs/befs/btree.c
index 4202db7496c..a66c9b1136e 100644
--- a/fs/befs/btree.c
+++ b/fs/befs/btree.c
@@ -5,7 +5,7 @@
  *
  * Licensed under the GNU GPL. See the file COPYING for details.
  *
- * 2002-02-05: Sergey S. Kostyliov added binary search withing
+ * 2002-02-05: Sergey S. Kostyliov added binary search within
  * 		btree nodes.
  *
  * Many thanks to:
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 06457ed8f3e..54b8c28bebc 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -734,7 +734,7 @@ parse_options(char *options, befs_mount_options * opts)
 
 /* This function has the responsibiltiy of getting the
  * filesystem ready for unmounting. 
- * Basicly, we free everything that we allocated in
+ * Basically, we free everything that we allocated in
  * befs_read_inode
  */
 static void
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index f34078d702d..303983fabfd 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -941,9 +941,13 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	current->mm->start_stack = bprm->p;
 
 #ifdef arch_randomize_brk
-	if ((current->flags & PF_RANDOMIZE) && (randomize_va_space > 1))
+	if ((current->flags & PF_RANDOMIZE) && (randomize_va_space > 1)) {
 		current->mm->brk = current->mm->start_brk =
 			arch_randomize_brk(current->mm);
+#ifdef CONFIG_COMPAT_BRK
+		current->brk_randomized = 1;
+#endif
+	}
 #endif
 
 	if (current->personality & MMAP_PAGE_ZERO) {
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 811384bec8d..397d3057d33 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -717,7 +717,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 	 * help simplify all this mumbo jumbo
 	 *
 	 * We've got two different sections of relocation entries.
-	 * The first is the GOT which resides at the begining of the data segment
+	 * The first is the GOT which resides at the beginning of the data segment
 	 * and is terminated with a -1.  This one can be relocated in place.
 	 * The second is the extra relocation entries tacked after the image's
 	 * data segment. These require a little more processing as the entry is
diff --git a/fs/bio.c b/fs/bio.c
index 4d6d4b6c2bf..840a0d75524 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1436,7 +1436,7 @@ EXPORT_SYMBOL(bio_flush_dcache_pages);
  *   preferred way to end I/O on a bio, it takes care of clearing
  *   BIO_UPTODATE on error. @error is 0 on success, and and one of the
  *   established -Exxxx (-EIO, for instance) error values in case
- *   something went wrong. Noone should call bi_end_io() directly on a
+ *   something went wrong. No one should call bi_end_io() directly on a
  *   bio unless they own it and thus know that it has an end_io
  *   function.
  **/
diff --git a/fs/block_dev.c b/fs/block_dev.c
index c1511c674f5..257b00e9842 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -653,7 +653,7 @@ void bd_forget(struct inode *inode)
  * @whole: whole block device containing @bdev, may equal @bdev
  * @holder: holder trying to claim @bdev
  *
- * Test whther @bdev can be claimed by @holder.
+ * Test whether @bdev can be claimed by @holder.
  *
  * CONTEXT:
  * spin_lock(&bdev_lock).
@@ -1102,6 +1102,7 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 			if (!bdev->bd_part)
 				goto out_clear;
 
+			ret = 0;
 			if (disk->fops->open) {
 				ret = disk->fops->open(bdev, mode);
 				if (ret == -ERESTARTSYS) {
@@ -1118,9 +1119,18 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 					put_disk(disk);
 					goto restart;
 				}
-				if (ret)
-					goto out_clear;
 			}
+			/*
+			 * If the device is invalidated, rescan partition
+			 * if open succeeded or failed with -ENOMEDIUM.
+			 * The latter is necessary to prevent ghost
+			 * partitions on a removed medium.
+			 */
+			if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
+				rescan_partitions(disk, bdev);
+			if (ret)
+				goto out_clear;
+
 			if (!bdev->bd_openers) {
 				bd_set_size(bdev,(loff_t)get_capacity(disk)<<9);
 				bdi = blk_get_backing_dev_info(bdev);
@@ -1128,8 +1138,6 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 					bdi = &default_backing_dev_info;
 				bdev_inode_switch_bdi(bdev->bd_inode, bdi);
 			}
-			if (bdev->bd_invalidated)
-				rescan_partitions(disk, bdev);
 		} else {
 			struct block_device *whole;
 			whole = bdget_disk(disk, 0);
@@ -1153,13 +1161,14 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part)
 		}
 	} else {
 		if (bdev->bd_contains == bdev) {
-			if (bdev->bd_disk->fops->open) {
+			ret = 0;
+			if (bdev->bd_disk->fops->open)
 				ret = bdev->bd_disk->fops->open(bdev, mode);
-				if (ret)
-					goto out_unlock_bdev;
-			}
-			if (bdev->bd_invalidated)
+			/* the same as first opener case, read comment there */
+			if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
 				rescan_partitions(bdev->bd_disk, bdev);
+			if (ret)
+				goto out_unlock_bdev;
 		}
 		/* only one opener holds refs to the module and disk */
 		module_put(disk->fops->owner);
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index de34bfad9ec..44ea5b92e1b 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -178,16 +178,18 @@ static int btrfs_xattr_acl_set(struct dentry *dentry, const char *name,
 
 	if (value) {
 		acl = posix_acl_from_xattr(value, size);
-		if (acl == NULL) {
-			value = NULL;
-			size = 0;
-		} else if (IS_ERR(acl)) {
+		if (IS_ERR(acl))
 			return PTR_ERR(acl);
+
+		if (acl) {
+			ret = posix_acl_valid(acl);
+			if (ret)
+				goto out;
 		}
 	}
 
 	ret = btrfs_set_acl(NULL, dentry->d_inode, acl, type);
-
+out:
 	posix_acl_release(acl);
 
 	return ret;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index d47ce830785..8f4b81de3ae 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -718,7 +718,7 @@ struct btrfs_space_info {
 	u64 total_bytes;	/* total bytes in the space,
 				   this doesn't take mirrors into account */
 	u64 bytes_used;		/* total bytes used,
-				   this does't take mirrors into account */
+				   this doesn't take mirrors into account */
 	u64 bytes_pinned;	/* total bytes pinned, will be freed when the
 				   transaction finishes */
 	u64 bytes_reserved;	/* total bytes the allocator has reserved for
@@ -740,8 +740,10 @@ struct btrfs_space_info {
 	 */
 	unsigned long reservation_progress;
 
-	int full;		/* indicates that we cannot allocate any more
+	int full:1;		/* indicates that we cannot allocate any more
 				   chunks for this space */
+	int chunk_alloc:1;	/* set if we are allocating a chunk */
+
 	int force_alloc;	/* set if we need to force a chunk alloc for
 				   this space */
 
@@ -1284,6 +1286,8 @@ struct btrfs_root {
 #define BTRFS_INODE_DIRSYNC		(1 << 10)
 #define BTRFS_INODE_COMPRESS		(1 << 11)
 
+#define BTRFS_INODE_ROOT_ITEM_INIT	(1 << 31)
+
 /* some macros to generate set/get funcs for the struct fields.  This
  * assumes there is a lefoo_to_cpu for every type, so lets make a simple
  * one for u8:
@@ -2359,6 +2363,8 @@ int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid);
 int btrfs_find_orphan_roots(struct btrfs_root *tree_root);
 int btrfs_set_root_node(struct btrfs_root_item *item,
 			struct extent_buffer *node);
+void btrfs_check_and_init_root_item(struct btrfs_root_item *item);
+
 /* dir-item.c */
 int btrfs_insert_dir_item(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *root, const char *name,
@@ -2572,6 +2578,11 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode,
 int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
 			      struct inode *inode, u64 start, u64 end);
 int btrfs_release_file(struct inode *inode, struct file *file);
+void btrfs_drop_pages(struct page **pages, size_t num_pages);
+int btrfs_dirty_pages(struct btrfs_root *root, struct inode *inode,
+		      struct page **pages, size_t num_pages,
+		      loff_t pos, size_t write_bytes,
+		      struct extent_state **cached);
 
 /* tree-defrag.c */
 int btrfs_defrag_leaves(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index d7a7315bd03..228cf36ece8 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1275,8 +1275,10 @@ struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root,
 	root->commit_root = btrfs_root_node(root);
 	BUG_ON(!root->node);
 out:
-	if (location->objectid != BTRFS_TREE_LOG_OBJECTID)
+	if (location->objectid != BTRFS_TREE_LOG_OBJECTID) {
 		root->ref_cows = 1;
+		btrfs_check_and_init_root_item(&root->root_item);
+	}
 
 	return root;
 }
@@ -2822,6 +2824,7 @@ static int btrfs_destroy_delayed_refs(struct btrfs_transaction *trans,
 
 	spin_lock(&delayed_refs->lock);
 	if (delayed_refs->num_entries == 0) {
+		spin_unlock(&delayed_refs->lock);
 		printk(KERN_INFO "delayed_refs has NO entry\n");
 		return ret;
 	}
@@ -3055,7 +3058,7 @@ static int btrfs_cleanup_transaction(struct btrfs_root *root)
 		btrfs_destroy_pinned_extent(root,
 					    root->fs_info->pinned_extents);
 
-		t->use_count = 0;
+		atomic_set(&t->use_count, 0);
 		list_del_init(&t->list);
 		memset(t, 0, sizeof(*t));
 		kmem_cache_free(btrfs_transaction_cachep, t);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index f619c3cb13b..9ee6bd55e16 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -33,6 +33,25 @@
 #include "locking.h"
 #include "free-space-cache.h"
 
+/* control flags for do_chunk_alloc's force field
+ * CHUNK_ALLOC_NO_FORCE means to only allocate a chunk
+ * if we really need one.
+ *
+ * CHUNK_ALLOC_FORCE means it must try to allocate one
+ *
+ * CHUNK_ALLOC_LIMITED means to only try and allocate one
+ * if we have very few chunks already allocated.  This is
+ * used as part of the clustering code to help make sure
+ * we have a good pool of storage to cluster in, without
+ * filling the FS with empty chunks
+ *
+ */
+enum {
+	CHUNK_ALLOC_NO_FORCE = 0,
+	CHUNK_ALLOC_FORCE = 1,
+	CHUNK_ALLOC_LIMITED = 2,
+};
+
 static int update_block_group(struct btrfs_trans_handle *trans,
 			      struct btrfs_root *root,
 			      u64 bytenr, u64 num_bytes, int alloc);
@@ -3019,7 +3038,8 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags,
 	found->bytes_readonly = 0;
 	found->bytes_may_use = 0;
 	found->full = 0;
-	found->force_alloc = 0;
+	found->force_alloc = CHUNK_ALLOC_NO_FORCE;
+	found->chunk_alloc = 0;
 	*space_info = found;
 	list_add_rcu(&found->list, &info->space_info);
 	atomic_set(&found->caching_threads, 0);
@@ -3150,7 +3170,7 @@ again:
 		if (!data_sinfo->full && alloc_chunk) {
 			u64 alloc_target;
 
-			data_sinfo->force_alloc = 1;
+			data_sinfo->force_alloc = CHUNK_ALLOC_FORCE;
 			spin_unlock(&data_sinfo->lock);
 alloc:
 			alloc_target = btrfs_get_alloc_profile(root, 1);
@@ -3160,7 +3180,8 @@ alloc:
 
 			ret = do_chunk_alloc(trans, root->fs_info->extent_root,
 					     bytes + 2 * 1024 * 1024,
-					     alloc_target, 0);
+					     alloc_target,
+					     CHUNK_ALLOC_NO_FORCE);
 			btrfs_end_transaction(trans, root);
 			if (ret < 0) {
 				if (ret != -ENOSPC)
@@ -3239,31 +3260,56 @@ static void force_metadata_allocation(struct btrfs_fs_info *info)
 	rcu_read_lock();
 	list_for_each_entry_rcu(found, head, list) {
 		if (found->flags & BTRFS_BLOCK_GROUP_METADATA)
-			found->force_alloc = 1;
+			found->force_alloc = CHUNK_ALLOC_FORCE;
 	}
 	rcu_read_unlock();
 }
 
 static int should_alloc_chunk(struct btrfs_root *root,
-			      struct btrfs_space_info *sinfo, u64 alloc_bytes)
+			      struct btrfs_space_info *sinfo, u64 alloc_bytes,
+			      int force)
 {
 	u64 num_bytes = sinfo->total_bytes - sinfo->bytes_readonly;
+	u64 num_allocated = sinfo->bytes_used + sinfo->bytes_reserved;
 	u64 thresh;
 
-	if (sinfo->bytes_used + sinfo->bytes_reserved +
-	    alloc_bytes + 256 * 1024 * 1024 < num_bytes)
+	if (force == CHUNK_ALLOC_FORCE)
+		return 1;
+
+	/*
+	 * in limited mode, we want to have some free space up to
+	 * about 1% of the FS size.
+	 */
+	if (force == CHUNK_ALLOC_LIMITED) {
+		thresh = btrfs_super_total_bytes(&root->fs_info->super_copy);
+		thresh = max_t(u64, 64 * 1024 * 1024,
+			       div_factor_fine(thresh, 1));
+
+		if (num_bytes - num_allocated < thresh)
+			return 1;
+	}
+
+	/*
+	 * we have two similar checks here, one based on percentage
+	 * and once based on a hard number of 256MB.  The idea
+	 * is that if we have a good amount of free
+	 * room, don't allocate a chunk.  A good mount is
+	 * less than 80% utilized of the chunks we have allocated,
+	 * or more than 256MB free
+	 */
+	if (num_allocated + alloc_bytes + 256 * 1024 * 1024 < num_bytes)
 		return 0;
 
-	if (sinfo->bytes_used + sinfo->bytes_reserved +
-	    alloc_bytes < div_factor(num_bytes, 8))
+	if (num_allocated + alloc_bytes < div_factor(num_bytes, 8))
 		return 0;
 
 	thresh = btrfs_super_total_bytes(&root->fs_info->super_copy);
+
+	/* 256MB or 5% of the FS */
 	thresh = max_t(u64, 256 * 1024 * 1024, div_factor_fine(thresh, 5));
 
 	if (num_bytes > thresh && sinfo->bytes_used < div_factor(num_bytes, 3))
 		return 0;
-
 	return 1;
 }
 
@@ -3273,10 +3319,9 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 {
 	struct btrfs_space_info *space_info;
 	struct btrfs_fs_info *fs_info = extent_root->fs_info;
+	int wait_for_alloc = 0;
 	int ret = 0;
 
-	mutex_lock(&fs_info->chunk_mutex);
-
 	flags = btrfs_reduce_alloc_profile(extent_root, flags);
 
 	space_info = __find_space_info(extent_root->fs_info, flags);
@@ -3287,21 +3332,40 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 	}
 	BUG_ON(!space_info);
 
+again:
 	spin_lock(&space_info->lock);
 	if (space_info->force_alloc)
-		force = 1;
+		force = space_info->force_alloc;
 	if (space_info->full) {
 		spin_unlock(&space_info->lock);
-		goto out;
+		return 0;
 	}
 
-	if (!force && !should_alloc_chunk(extent_root, space_info,
-					  alloc_bytes)) {
+	if (!should_alloc_chunk(extent_root, space_info, alloc_bytes, force)) {
 		spin_unlock(&space_info->lock);
-		goto out;
+		return 0;
+	} else if (space_info->chunk_alloc) {
+		wait_for_alloc = 1;
+	} else {
+		space_info->chunk_alloc = 1;
 	}
+
 	spin_unlock(&space_info->lock);
 
+	mutex_lock(&fs_info->chunk_mutex);
+
+	/*
+	 * The chunk_mutex is held throughout the entirety of a chunk
+	 * allocation, so once we've acquired the chunk_mutex we know that the
+	 * other guy is done and we need to recheck and see if we should
+	 * allocate.
+	 */
+	if (wait_for_alloc) {
+		mutex_unlock(&fs_info->chunk_mutex);
+		wait_for_alloc = 0;
+		goto again;
+	}
+
 	/*
 	 * If we have mixed data/metadata chunks we want to make sure we keep
 	 * allocating mixed chunks instead of individual chunks.
@@ -3327,9 +3391,10 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 		space_info->full = 1;
 	else
 		ret = 1;
-	space_info->force_alloc = 0;
+
+	space_info->force_alloc = CHUNK_ALLOC_NO_FORCE;
+	space_info->chunk_alloc = 0;
 	spin_unlock(&space_info->lock);
-out:
 	mutex_unlock(&extent_root->fs_info->chunk_mutex);
 	return ret;
 }
@@ -5303,11 +5368,13 @@ loop:
 
 		if (allowed_chunk_alloc) {
 			ret = do_chunk_alloc(trans, root, num_bytes +
-					     2 * 1024 * 1024, data, 1);
+					     2 * 1024 * 1024, data,
+					     CHUNK_ALLOC_LIMITED);
 			allowed_chunk_alloc = 0;
 			done_chunk_alloc = 1;
-		} else if (!done_chunk_alloc) {
-			space_info->force_alloc = 1;
+		} else if (!done_chunk_alloc &&
+			   space_info->force_alloc == CHUNK_ALLOC_NO_FORCE) {
+			space_info->force_alloc = CHUNK_ALLOC_LIMITED;
 		}
 
 		if (loop < LOOP_NO_EMPTY_SIZE) {
@@ -5393,7 +5460,8 @@ again:
 	 */
 	if (empty_size || root->ref_cows)
 		ret = do_chunk_alloc(trans, root->fs_info->extent_root,
-				     num_bytes + 2 * 1024 * 1024, data, 0);
+				     num_bytes + 2 * 1024 * 1024, data,
+				     CHUNK_ALLOC_NO_FORCE);
 
 	WARN_ON(num_bytes < root->sectorsize);
 	ret = find_free_extent(trans, root, num_bytes, empty_size,
@@ -5405,7 +5473,7 @@ again:
 		num_bytes = num_bytes & ~(root->sectorsize - 1);
 		num_bytes = max(num_bytes, min_alloc_size);
 		do_chunk_alloc(trans, root->fs_info->extent_root,
-			       num_bytes, data, 1);
+			       num_bytes, data, CHUNK_ALLOC_FORCE);
 		goto again;
 	}
 	if (ret == -ENOSPC && btrfs_test_opt(root, ENOSPC_DEBUG)) {
@@ -7991,6 +8059,10 @@ static noinline int relocate_one_extent(struct btrfs_root *extent_root,
 				u64 group_start = group->key.objectid;
 				new_extents = kmalloc(sizeof(*new_extents),
 						      GFP_NOFS);
+				if (!new_extents) {
+					ret = -ENOMEM;
+					goto out;
+				}
 				nr_extents = 1;
 				ret = get_new_locations(reloc_inode,
 							extent_key,
@@ -8109,13 +8181,15 @@ int btrfs_set_block_group_ro(struct btrfs_root *root,
 
 	alloc_flags = update_block_group_flags(root, cache->flags);
 	if (alloc_flags != cache->flags)
-		do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags, 1);
+		do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags,
+			       CHUNK_ALLOC_FORCE);
 
 	ret = set_block_group_ro(cache);
 	if (!ret)
 		goto out;
 	alloc_flags = get_alloc_profile(root, cache->space_info->flags);
-	ret = do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags, 1);
+	ret = do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags,
+			     CHUNK_ALLOC_FORCE);
 	if (ret < 0)
 		goto out;
 	ret = set_block_group_ro(cache);
@@ -8128,7 +8202,8 @@ int btrfs_force_chunk_alloc(struct btrfs_trans_handle *trans,
 			    struct btrfs_root *root, u64 type)
 {
 	u64 alloc_flags = get_alloc_profile(root, type);
-	return do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags, 1);
+	return do_chunk_alloc(trans, root, 2 * 1024 * 1024, alloc_flags,
+			      CHUNK_ALLOC_FORCE);
 }
 
 /*
@@ -8781,23 +8856,38 @@ out:
 int btrfs_init_space_info(struct btrfs_fs_info *fs_info)
 {
 	struct btrfs_space_info *space_info;
+	struct btrfs_super_block *disk_super;
+	u64 features;
+	u64 flags;
+	int mixed = 0;
 	int ret;
 
-	ret = update_space_info(fs_info, BTRFS_BLOCK_GROUP_SYSTEM, 0, 0,
-								 &space_info);
-	if (ret)
-		return ret;
+	disk_super = &fs_info->super_copy;
+	if (!btrfs_super_root(disk_super))
+		return 1;
 
-	ret = update_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA, 0, 0,
-								 &space_info);
-	if (ret)
-		return ret;
+	features = btrfs_super_incompat_flags(disk_super);
+	if (features & BTRFS_FEATURE_INCOMPAT_MIXED_GROUPS)
+		mixed = 1;
 
-	ret = update_space_info(fs_info, BTRFS_BLOCK_GROUP_DATA, 0, 0,
-								 &space_info);
+	flags = BTRFS_BLOCK_GROUP_SYSTEM;
+	ret = update_space_info(fs_info, flags, 0, 0, &space_info);
 	if (ret)
-		return ret;
+		goto out;
 
+	if (mixed) {
+		flags = BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA;
+		ret = update_space_info(fs_info, flags, 0, 0, &space_info);
+	} else {
+		flags = BTRFS_BLOCK_GROUP_METADATA;
+		ret = update_space_info(fs_info, flags, 0, 0, &space_info);
+		if (ret)
+			goto out;
+
+		flags = BTRFS_BLOCK_GROUP_DATA;
+		ret = update_space_info(fs_info, flags, 0, 0, &space_info);
+	}
+out:
 	return ret;
 }
 
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 20ddb28602a..96fcfa522da 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -10,6 +10,7 @@
 #include <linux/swap.h>
 #include <linux/writeback.h>
 #include <linux/pagevec.h>
+#include <linux/prefetch.h>
 #include "extent_io.h"
 #include "extent_map.h"
 #include "compat.h"
@@ -690,6 +691,15 @@ static void cache_state(struct extent_state *state,
 	}
 }
 
+static void uncache_state(struct extent_state **cached_ptr)
+{
+	if (cached_ptr && (*cached_ptr)) {
+		struct extent_state *state = *cached_ptr;
+		*cached_ptr = NULL;
+		free_extent_state(state);
+	}
+}
+
 /*
  * set some bits on a range in the tree.  This may require allocations or
  * sleeping, so the gfp mask is used to indicate what is allowed.
@@ -940,10 +950,10 @@ static int clear_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
 }
 
 int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
-			gfp_t mask)
+			struct extent_state **cached_state, gfp_t mask)
 {
-	return set_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, NULL,
-			      NULL, mask);
+	return set_extent_bit(tree, start, end, EXTENT_UPTODATE, 0,
+			      NULL, cached_state, mask);
 }
 
 static int clear_extent_uptodate(struct extent_io_tree *tree, u64 start,
@@ -1012,8 +1022,7 @@ int unlock_extent_cached(struct extent_io_tree *tree, u64 start, u64 end,
 				mask);
 }
 
-int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end,
-		  gfp_t mask)
+int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask)
 {
 	return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, NULL,
 				mask);
@@ -1735,6 +1744,9 @@ static void end_bio_extent_readpage(struct bio *bio, int err)
 
 	do {
 		struct page *page = bvec->bv_page;
+		struct extent_state *cached = NULL;
+		struct extent_state *state;
+
 		tree = &BTRFS_I(page->mapping->host)->io_tree;
 
 		start = ((u64)page->index << PAGE_CACHE_SHIFT) +
@@ -1749,9 +1761,20 @@ static void end_bio_extent_readpage(struct bio *bio, int err)
 		if (++bvec <= bvec_end)
 			prefetchw(&bvec->bv_page->flags);
 
+		spin_lock(&tree->lock);
+		state = find_first_extent_bit_state(tree, start, EXTENT_LOCKED);
+		if (state && state->start == start) {
+			/*
+			 * take a reference on the state, unlock will drop
+			 * the ref
+			 */
+			cache_state(state, &cached);
+		}
+		spin_unlock(&tree->lock);
+
 		if (uptodate && tree->ops && tree->ops->readpage_end_io_hook) {
 			ret = tree->ops->readpage_end_io_hook(page, start, end,
-							      NULL);
+							      state);
 			if (ret)
 				uptodate = 0;
 		}
@@ -1764,15 +1787,16 @@ static void end_bio_extent_readpage(struct bio *bio, int err)
 					test_bit(BIO_UPTODATE, &bio->bi_flags);
 				if (err)
 					uptodate = 0;
+				uncache_state(&cached);
 				continue;
 			}
 		}
 
 		if (uptodate) {
-			set_extent_uptodate(tree, start, end,
+			set_extent_uptodate(tree, start, end, &cached,
 					    GFP_ATOMIC);
 		}
-		unlock_extent(tree, start, end, GFP_ATOMIC);
+		unlock_extent_cached(tree, start, end, &cached, GFP_ATOMIC);
 
 		if (whole_page) {
 			if (uptodate) {
@@ -1811,6 +1835,7 @@ static void end_bio_extent_preparewrite(struct bio *bio, int err)
 
 	do {
 		struct page *page = bvec->bv_page;
+		struct extent_state *cached = NULL;
 		tree = &BTRFS_I(page->mapping->host)->io_tree;
 
 		start = ((u64)page->index << PAGE_CACHE_SHIFT) +
@@ -1821,13 +1846,14 @@ static void end_bio_extent_preparewrite(struct bio *bio, int err)
 			prefetchw(&bvec->bv_page->flags);
 
 		if (uptodate) {
-			set_extent_uptodate(tree, start, end, GFP_ATOMIC);
+			set_extent_uptodate(tree, start, end, &cached,
+					    GFP_ATOMIC);
 		} else {
 			ClearPageUptodate(page);
 			SetPageError(page);
 		}
 
-		unlock_extent(tree, start, end, GFP_ATOMIC);
+		unlock_extent_cached(tree, start, end, &cached, GFP_ATOMIC);
 
 	} while (bvec >= bio->bi_io_vec);
 
@@ -2016,14 +2042,17 @@ static int __extent_read_full_page(struct extent_io_tree *tree,
 	while (cur <= end) {
 		if (cur >= last_byte) {
 			char *userpage;
+			struct extent_state *cached = NULL;
+
 			iosize = PAGE_CACHE_SIZE - page_offset;
 			userpage = kmap_atomic(page, KM_USER0);
 			memset(userpage + page_offset, 0, iosize);
 			flush_dcache_page(page);
 			kunmap_atomic(userpage, KM_USER0);
 			set_extent_uptodate(tree, cur, cur + iosize - 1,
-					    GFP_NOFS);
-			unlock_extent(tree, cur, cur + iosize - 1, GFP_NOFS);
+					    &cached, GFP_NOFS);
+			unlock_extent_cached(tree, cur, cur + iosize - 1,
+					     &cached, GFP_NOFS);
 			break;
 		}
 		em = get_extent(inode, page, page_offset, cur,
@@ -2063,14 +2092,17 @@ static int __extent_read_full_page(struct extent_io_tree *tree,
 		/* we've found a hole, just zero and go on */
 		if (block_start == EXTENT_MAP_HOLE) {
 			char *userpage;
+			struct extent_state *cached = NULL;
+
 			userpage = kmap_atomic(page, KM_USER0);
 			memset(userpage + page_offset, 0, iosize);
 			flush_dcache_page(page);
 			kunmap_atomic(userpage, KM_USER0);
 
 			set_extent_uptodate(tree, cur, cur + iosize - 1,
-					    GFP_NOFS);
-			unlock_extent(tree, cur, cur + iosize - 1, GFP_NOFS);
+					    &cached, GFP_NOFS);
+			unlock_extent_cached(tree, cur, cur + iosize - 1,
+			                     &cached, GFP_NOFS);
 			cur = cur + iosize;
 			page_offset += iosize;
 			continue;
@@ -2650,7 +2682,7 @@ int extent_readpages(struct extent_io_tree *tree,
 		prefetchw(&page->flags);
 		list_del(&page->lru);
 		if (!add_to_page_cache_lru(page, mapping,
-					page->index, GFP_KERNEL)) {
+					page->index, GFP_NOFS)) {
 			__extent_read_full_page(tree, page, get_extent,
 						&bio, 0, &bio_flags);
 		}
@@ -2789,9 +2821,12 @@ int extent_prepare_write(struct extent_io_tree *tree,
 			iocount++;
 			block_start = block_start + iosize;
 		} else {
-			set_extent_uptodate(tree, block_start, cur_end,
+			struct extent_state *cached = NULL;
+
+			set_extent_uptodate(tree, block_start, cur_end, &cached,
 					    GFP_NOFS);
-			unlock_extent(tree, block_start, cur_end, GFP_NOFS);
+			unlock_extent_cached(tree, block_start, cur_end,
+					     &cached, GFP_NOFS);
 			block_start = cur_end + 1;
 		}
 		page_offset = block_start & (PAGE_CACHE_SIZE - 1);
@@ -3457,7 +3492,7 @@ int set_extent_buffer_uptodate(struct extent_io_tree *tree,
 	num_pages = num_extent_pages(eb->start, eb->len);
 
 	set_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
-			    GFP_NOFS);
+			    NULL, GFP_NOFS);
 	for (i = 0; i < num_pages; i++) {
 		page = extent_buffer_page(eb, i);
 		if ((i == 0 && (eb->start & (PAGE_CACHE_SIZE - 1))) ||
@@ -3885,6 +3920,12 @@ static void move_pages(struct page *dst_page, struct page *src_page,
 	kunmap_atomic(dst_kaddr, KM_USER0);
 }
 
+static inline bool areas_overlap(unsigned long src, unsigned long dst, unsigned long len)
+{
+	unsigned long distance = (src > dst) ? src - dst : dst - src;
+	return distance < len;
+}
+
 static void copy_pages(struct page *dst_page, struct page *src_page,
 		       unsigned long dst_off, unsigned long src_off,
 		       unsigned long len)
@@ -3892,10 +3933,12 @@ static void copy_pages(struct page *dst_page, struct page *src_page,
 	char *dst_kaddr = kmap_atomic(dst_page, KM_USER0);
 	char *src_kaddr;
 
-	if (dst_page != src_page)
+	if (dst_page != src_page) {
 		src_kaddr = kmap_atomic(src_page, KM_USER1);
-	else
+	} else {
 		src_kaddr = dst_kaddr;
+		BUG_ON(areas_overlap(src_off, dst_off, len));
+	}
 
 	memcpy(dst_kaddr + dst_off, src_kaddr + src_off, len);
 	kunmap_atomic(dst_kaddr, KM_USER0);
@@ -3970,7 +4013,7 @@ void memmove_extent_buffer(struct extent_buffer *dst, unsigned long dst_offset,
 		       "len %lu len %lu\n", dst_offset, len, dst->len);
 		BUG_ON(1);
 	}
-	if (dst_offset < src_offset) {
+	if (!areas_overlap(src_offset, dst_offset, len)) {
 		memcpy_extent_buffer(dst, dst_offset, src_offset, len);
 		return;
 	}
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index f62c5442835..af2d7179c37 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -208,7 +208,7 @@ int set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
 		   int bits, int exclusive_bits, u64 *failed_start,
 		   struct extent_state **cached_state, gfp_t mask);
 int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
-			gfp_t mask);
+			struct extent_state **cached_state, gfp_t mask);
 int set_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
 		   gfp_t mask);
 int set_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index 2b6c12e983b..a24a3f2fa13 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -243,7 +243,7 @@ out:
  * Insert @em into @tree or perform a simple forward/backward merge with
  * existing mappings.  The extent_map struct passed in will be inserted
  * into the tree directly, with an additional reference taken, or a
- * reference dropped if the merge attempt was successfull.
+ * reference dropped if the merge attempt was successful.
  */
 int add_extent_mapping(struct extent_map_tree *tree,
 		       struct extent_map *em)
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 656bc0a892b..75899a01dde 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -104,7 +104,7 @@ static noinline int btrfs_copy_from_user(loff_t pos, int num_pages,
 /*
  * unlocks pages after btrfs_file_write is done with them
  */
-static noinline void btrfs_drop_pages(struct page **pages, size_t num_pages)
+void btrfs_drop_pages(struct page **pages, size_t num_pages)
 {
 	size_t i;
 	for (i = 0; i < num_pages; i++) {
@@ -127,16 +127,13 @@ static noinline void btrfs_drop_pages(struct page **pages, size_t num_pages)
  * this also makes the decision about creating an inline extent vs
  * doing real data extents, marking pages dirty and delalloc as required.
  */
-static noinline int dirty_and_release_pages(struct btrfs_root *root,
-					    struct file *file,
-					    struct page **pages,
-					    size_t num_pages,
-					    loff_t pos,
-					    size_t write_bytes)
+int btrfs_dirty_pages(struct btrfs_root *root, struct inode *inode,
+		      struct page **pages, size_t num_pages,
+		      loff_t pos, size_t write_bytes,
+		      struct extent_state **cached)
 {
 	int err = 0;
 	int i;
-	struct inode *inode = fdentry(file)->d_inode;
 	u64 num_bytes;
 	u64 start_pos;
 	u64 end_of_last_block;
@@ -149,7 +146,7 @@ static noinline int dirty_and_release_pages(struct btrfs_root *root,
 
 	end_of_last_block = start_pos + num_bytes - 1;
 	err = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block,
-					NULL);
+					cached);
 	if (err)
 		return err;
 
@@ -906,7 +903,7 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file,
 	unsigned long last_index;
 	size_t num_written = 0;
 	int nrptrs;
-	int ret;
+	int ret = 0;
 
 	nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) /
 		     PAGE_CACHE_SIZE, PAGE_CACHE_SIZE /
@@ -992,9 +989,9 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file,
 		}
 
 		if (copied > 0) {
-			ret = dirty_and_release_pages(root, file, pages,
-						      dirty_pages, pos,
-						      copied);
+			ret = btrfs_dirty_pages(root, inode, pages,
+						dirty_pages, pos, copied,
+						NULL);
 			if (ret) {
 				btrfs_delalloc_release_space(inode,
 					dirty_pages << PAGE_CACHE_SHIFT);
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 0037427d8a9..63731a1fb0a 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -24,6 +24,7 @@
 #include "free-space-cache.h"
 #include "transaction.h"
 #include "disk-io.h"
+#include "extent_io.h"
 
 #define BITS_PER_BITMAP		(PAGE_CACHE_SIZE * 8)
 #define MAX_CACHE_BYTES_PER_GIG	(32 * 1024)
@@ -81,6 +82,8 @@ struct inode *lookup_free_space_inode(struct btrfs_root *root,
 		return ERR_PTR(-ENOENT);
 	}
 
+	inode->i_mapping->flags &= ~__GFP_FS;
+
 	spin_lock(&block_group->lock);
 	if (!root->fs_info->closing) {
 		block_group->inode = igrab(inode);
@@ -222,6 +225,7 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info,
 	u64 num_entries;
 	u64 num_bitmaps;
 	u64 generation;
+	u64 used = btrfs_block_group_used(&block_group->item);
 	u32 cur_crc = ~(u32)0;
 	pgoff_t index = 0;
 	unsigned long first_page_offset;
@@ -467,6 +471,17 @@ next:
 		index++;
 	}
 
+	spin_lock(&block_group->tree_lock);
+	if (block_group->free_space != (block_group->key.offset - used -
+					block_group->bytes_super)) {
+		spin_unlock(&block_group->tree_lock);
+		printk(KERN_ERR "block group %llu has an wrong amount of free "
+		       "space\n", block_group->key.objectid);
+		ret = 0;
+		goto free_cache;
+	}
+	spin_unlock(&block_group->tree_lock);
+
 	ret = 1;
 out:
 	kfree(checksums);
@@ -493,18 +508,23 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 	struct inode *inode;
 	struct rb_node *node;
 	struct list_head *pos, *n;
+	struct page **pages;
 	struct page *page;
 	struct extent_state *cached_state = NULL;
+	struct btrfs_free_cluster *cluster = NULL;
+	struct extent_io_tree *unpin = NULL;
 	struct list_head bitmap_list;
 	struct btrfs_key key;
+	u64 start, end, len;
 	u64 bytes = 0;
 	u32 *crc, *checksums;
-	pgoff_t index = 0, last_index = 0;
 	unsigned long first_page_offset;
-	int num_checksums;
+	int index = 0, num_pages = 0;
 	int entries = 0;
 	int bitmaps = 0;
 	int ret = 0;
+	bool next_page = false;
+	bool out_of_space = false;
 
 	root = root->fs_info->tree_root;
 
@@ -532,24 +552,43 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 		return 0;
 	}
 
-	last_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT;
+	num_pages = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
+		PAGE_CACHE_SHIFT;
 	filemap_write_and_wait(inode->i_mapping);
 	btrfs_wait_ordered_range(inode, inode->i_size &
 				 ~(root->sectorsize - 1), (u64)-1);
 
 	/* We need a checksum per page. */
-	num_checksums = i_size_read(inode) / PAGE_CACHE_SIZE;
-	crc = checksums  = kzalloc(sizeof(u32) * num_checksums, GFP_NOFS);
+	crc = checksums = kzalloc(sizeof(u32) * num_pages, GFP_NOFS);
 	if (!crc) {
 		iput(inode);
 		return 0;
 	}
 
+	pages = kzalloc(sizeof(struct page *) * num_pages, GFP_NOFS);
+	if (!pages) {
+		kfree(crc);
+		iput(inode);
+		return 0;
+	}
+
 	/* Since the first page has all of our checksums and our generation we
 	 * need to calculate the offset into the page that we can start writing
 	 * our entries.
 	 */
-	first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64);
+	first_page_offset = (sizeof(u32) * num_pages) + sizeof(u64);
+
+	/* Get the cluster for this block_group if it exists */
+	if (!list_empty(&block_group->cluster_list))
+		cluster = list_entry(block_group->cluster_list.next,
+				     struct btrfs_free_cluster,
+				     block_group_list);
+
+	/*
+	 * We shouldn't have switched the pinned extents yet so this is the
+	 * right one
+	 */
+	unpin = root->fs_info->pinned_extents;
 
 	/*
 	 * Lock all pages first so we can lock the extent safely.
@@ -559,20 +598,18 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 	 * after find_get_page at this point.  Just putting this here so people
 	 * know and don't freak out.
 	 */
-	while (index <= last_index) {
+	while (index < num_pages) {
 		page = grab_cache_page(inode->i_mapping, index);
 		if (!page) {
-			pgoff_t i = 0;
+			int i;
 
-			while (i < index) {
-				page = find_get_page(inode->i_mapping, i);
-				unlock_page(page);
-				page_cache_release(page);
-				page_cache_release(page);
-				i++;
+			for (i = 0; i < num_pages; i++) {
+				unlock_page(pages[i]);
+				page_cache_release(pages[i]);
 			}
 			goto out_free;
 		}
+		pages[index] = page;
 		index++;
 	}
 
@@ -580,6 +617,12 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 	lock_extent_bits(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1,
 			 0, &cached_state, GFP_NOFS);
 
+	/*
+	 * When searching for pinned extents, we need to start at our start
+	 * offset.
+	 */
+	start = block_group->key.objectid;
+
 	/* Write out the extent entries */
 	do {
 		struct btrfs_free_space_entry *entry;
@@ -587,18 +630,25 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 		unsigned long offset = 0;
 		unsigned long start_offset = 0;
 
+		next_page = false;
+
 		if (index == 0) {
 			start_offset = first_page_offset;
 			offset = start_offset;
 		}
 
-		page = find_get_page(inode->i_mapping, index);
+		if (index >= num_pages) {
+			out_of_space = true;
+			break;
+		}
+
+		page = pages[index];
 
 		addr = kmap(page);
 		entry = addr + start_offset;
 
 		memset(addr, 0, PAGE_CACHE_SIZE);
-		while (1) {
+		while (node && !next_page) {
 			struct btrfs_free_space *e;
 
 			e = rb_entry(node, struct btrfs_free_space, offset_index);
@@ -614,12 +664,49 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 				entry->type = BTRFS_FREE_SPACE_EXTENT;
 			}
 			node = rb_next(node);
-			if (!node)
-				break;
+			if (!node && cluster) {
+				node = rb_first(&cluster->root);
+				cluster = NULL;
+			}
 			offset += sizeof(struct btrfs_free_space_entry);
 			if (offset + sizeof(struct btrfs_free_space_entry) >=
 			    PAGE_CACHE_SIZE)
+				next_page = true;
+			entry++;
+		}
+
+		/*
+		 * We want to add any pinned extents to our free space cache
+		 * so we don't leak the space
+		 */
+		while (!next_page && (start < block_group->key.objectid +
+				      block_group->key.offset)) {
+			ret = find_first_extent_bit(unpin, start, &start, &end,
+						    EXTENT_DIRTY);
+			if (ret) {
+				ret = 0;
+				break;
+			}
+
+			/* This pinned extent is out of our range */
+			if (start >= block_group->key.objectid +
+			    block_group->key.offset)
 				break;
+
+			len = block_group->key.objectid +
+				block_group->key.offset - start;
+			len = min(len, end + 1 - start);
+
+			entries++;
+			entry->offset = cpu_to_le64(start);
+			entry->bytes = cpu_to_le64(len);
+			entry->type = BTRFS_FREE_SPACE_EXTENT;
+
+			start = end + 1;
+			offset += sizeof(struct btrfs_free_space_entry);
+			if (offset + sizeof(struct btrfs_free_space_entry) >=
+			    PAGE_CACHE_SIZE)
+				next_page = true;
 			entry++;
 		}
 		*crc = ~(u32)0;
@@ -632,25 +719,8 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 
 		bytes += PAGE_CACHE_SIZE;
 
-		ClearPageChecked(page);
-		set_page_extent_mapped(page);
-		SetPageUptodate(page);
-		set_page_dirty(page);
-
-		/*
-		 * We need to release our reference we got for grab_cache_page,
-		 * except for the first page which will hold our checksums, we
-		 * do that below.
-		 */
-		if (index != 0) {
-			unlock_page(page);
-			page_cache_release(page);
-		}
-
-		page_cache_release(page);
-
 		index++;
-	} while (node);
+	} while (node || next_page);
 
 	/* Write out the bitmaps */
 	list_for_each_safe(pos, n, &bitmap_list) {
@@ -658,7 +728,11 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 		struct btrfs_free_space *entry =
 			list_entry(pos, struct btrfs_free_space, list);
 
-		page = find_get_page(inode->i_mapping, index);
+		if (index >= num_pages) {
+			out_of_space = true;
+			break;
+		}
+		page = pages[index];
 
 		addr = kmap(page);
 		memcpy(addr, entry->bitmap, PAGE_CACHE_SIZE);
@@ -669,64 +743,58 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 		crc++;
 		bytes += PAGE_CACHE_SIZE;
 
-		ClearPageChecked(page);
-		set_page_extent_mapped(page);
-		SetPageUptodate(page);
-		set_page_dirty(page);
-		unlock_page(page);
-		page_cache_release(page);
-		page_cache_release(page);
 		list_del_init(&entry->list);
 		index++;
 	}
 
+	if (out_of_space) {
+		btrfs_drop_pages(pages, num_pages);
+		unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
+				     i_size_read(inode) - 1, &cached_state,
+				     GFP_NOFS);
+		ret = 0;
+		goto out_free;
+	}
+
 	/* Zero out the rest of the pages just to make sure */
-	while (index <= last_index) {
+	while (index < num_pages) {
 		void *addr;
 
-		page = find_get_page(inode->i_mapping, index);
-
+		page = pages[index];
 		addr = kmap(page);
 		memset(addr, 0, PAGE_CACHE_SIZE);
 		kunmap(page);
-		ClearPageChecked(page);
-		set_page_extent_mapped(page);
-		SetPageUptodate(page);
-		set_page_dirty(page);
-		unlock_page(page);
-		page_cache_release(page);
-		page_cache_release(page);
 		bytes += PAGE_CACHE_SIZE;
 		index++;
 	}
 
-	btrfs_set_extent_delalloc(inode, 0, bytes - 1, &cached_state);
-
 	/* Write the checksums and trans id to the first page */
 	{
 		void *addr;
 		u64 *gen;
 
-		page = find_get_page(inode->i_mapping, 0);
+		page = pages[0];
 
 		addr = kmap(page);
-		memcpy(addr, checksums, sizeof(u32) * num_checksums);
-		gen = addr + (sizeof(u32) * num_checksums);
+		memcpy(addr, checksums, sizeof(u32) * num_pages);
+		gen = addr + (sizeof(u32) * num_pages);
 		*gen = trans->transid;
 		kunmap(page);
-		ClearPageChecked(page);
-		set_page_extent_mapped(page);
-		SetPageUptodate(page);
-		set_page_dirty(page);
-		unlock_page(page);
-		page_cache_release(page);
-		page_cache_release(page);
 	}
-	BTRFS_I(inode)->generation = trans->transid;
 
+	ret = btrfs_dirty_pages(root, inode, pages, num_pages, 0,
+					    bytes, &cached_state);
+	btrfs_drop_pages(pages, num_pages);
 	unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0,
 			     i_size_read(inode) - 1, &cached_state, GFP_NOFS);
 
+	if (ret) {
+		ret = 0;
+		goto out_free;
+	}
+
+	BTRFS_I(inode)->generation = trans->transid;
+
 	filemap_write_and_wait(inode->i_mapping);
 
 	key.objectid = BTRFS_FREE_SPACE_OBJECTID;
@@ -777,6 +845,7 @@ out_free:
 		BTRFS_I(inode)->generation = 0;
 	}
 	kfree(checksums);
+	kfree(pages);
 	btrfs_update_inode(trans, root, inode);
 	iput(inode);
 	return ret;
@@ -1699,10 +1768,13 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group)
 
 	while ((node = rb_last(&block_group->free_space_offset)) != NULL) {
 		info = rb_entry(node, struct btrfs_free_space, offset_index);
-		unlink_free_space(block_group, info);
-		if (info->bitmap)
-			kfree(info->bitmap);
-		kmem_cache_free(btrfs_free_space_cachep, info);
+		if (!info->bitmap) {
+			unlink_free_space(block_group, info);
+			kmem_cache_free(btrfs_free_space_cachep, info);
+		} else {
+			free_bitmap(block_group, info);
+		}
+
 		if (need_resched()) {
 			spin_unlock(&block_group->tree_lock);
 			cond_resched();
@@ -2232,7 +2304,7 @@ int btrfs_trim_block_group(struct btrfs_block_group_cache *block_group,
 			start = entry->offset;
 			bytes = min(entry->bytes, end - start);
 			unlink_free_space(block_group, entry);
-			kfree(entry);
+			kmem_cache_free(btrfs_free_space_cachep, entry);
 		}
 
 		spin_unlock(&block_group->tree_lock);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 93c28a1d6bd..7cd8ab0ef04 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -112,6 +112,7 @@ static int btrfs_init_inode_security(struct btrfs_trans_handle *trans,
 static noinline int insert_inline_extent(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root, struct inode *inode,
 				u64 start, size_t size, size_t compressed_size,
+				int compress_type,
 				struct page **compressed_pages)
 {
 	struct btrfs_key key;
@@ -126,12 +127,9 @@ static noinline int insert_inline_extent(struct btrfs_trans_handle *trans,
 	size_t cur_size = size;
 	size_t datasize;
 	unsigned long offset;
-	int compress_type = BTRFS_COMPRESS_NONE;
 
-	if (compressed_size && compressed_pages) {
-		compress_type = root->fs_info->compress_type;
+	if (compressed_size && compressed_pages)
 		cur_size = compressed_size;
-	}
 
 	path = btrfs_alloc_path();
 	if (!path)
@@ -221,7 +219,7 @@ fail:
 static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans,
 				 struct btrfs_root *root,
 				 struct inode *inode, u64 start, u64 end,
-				 size_t compressed_size,
+				 size_t compressed_size, int compress_type,
 				 struct page **compressed_pages)
 {
 	u64 isize = i_size_read(inode);
@@ -254,7 +252,7 @@ static noinline int cow_file_range_inline(struct btrfs_trans_handle *trans,
 		inline_len = min_t(u64, isize, actual_end);
 	ret = insert_inline_extent(trans, root, inode, start,
 				   inline_len, compressed_size,
-				   compressed_pages);
+				   compress_type, compressed_pages);
 	BUG_ON(ret);
 	btrfs_delalloc_release_metadata(inode, end + 1 - start);
 	btrfs_drop_extent_cache(inode, start, aligned_end - 1, 0);
@@ -433,12 +431,13 @@ again:
 			 * to make an uncompressed inline extent.
 			 */
 			ret = cow_file_range_inline(trans, root, inode,
-						    start, end, 0, NULL);
+						    start, end, 0, 0, NULL);
 		} else {
 			/* try making a compressed inline extent */
 			ret = cow_file_range_inline(trans, root, inode,
 						    start, end,
-						    total_compressed, pages);
+						    total_compressed,
+						    compress_type, pages);
 		}
 		if (ret == 0) {
 			/*
@@ -792,7 +791,7 @@ static noinline int cow_file_range(struct inode *inode,
 	if (start == 0) {
 		/* lets try to make an inline extent */
 		ret = cow_file_range_inline(trans, root, inode,
-					    start, end, 0, NULL);
+					    start, end, 0, 0, NULL);
 		if (ret == 0) {
 			extent_clear_unlock_delalloc(inode,
 				     &BTRFS_I(inode)->io_tree,
@@ -955,6 +954,7 @@ static int cow_file_range_async(struct inode *inode, struct page *locked_page,
 			 1, 0, NULL, GFP_NOFS);
 	while (start < end) {
 		async_cow = kmalloc(sizeof(*async_cow), GFP_NOFS);
+		BUG_ON(!async_cow);
 		async_cow->inode = inode;
 		async_cow->root = root;
 		async_cow->locked_page = locked_page;
@@ -1771,9 +1771,12 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end)
 	add_pending_csums(trans, inode, ordered_extent->file_offset,
 			  &ordered_extent->list);
 
-	btrfs_ordered_update_i_size(inode, 0, ordered_extent);
-	ret = btrfs_update_inode(trans, root, inode);
-	BUG_ON(ret);
+	ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
+	if (!ret) {
+		ret = btrfs_update_inode(trans, root, inode);
+		BUG_ON(ret);
+	}
+	ret = 0;
 out:
 	if (nolock) {
 		if (trans)
@@ -2222,8 +2225,6 @@ int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode)
 			insert = 1;
 #endif
 		insert = 1;
-	} else {
-		WARN_ON(!BTRFS_I(inode)->orphan_meta_reserved);
 	}
 
 	if (!BTRFS_I(inode)->orphan_meta_reserved) {
@@ -2324,7 +2325,7 @@ int btrfs_orphan_cleanup(struct btrfs_root *root)
 
 		/*
 		 * if ret == 0 means we found what we were searching for, which
-		 * is weird, but possible, so only screw with path if we didnt
+		 * is weird, but possible, so only screw with path if we didn't
 		 * find the key and see if we have stuff that matches
 		 */
 		if (ret > 0) {
@@ -2537,8 +2538,6 @@ static void btrfs_read_locked_inode(struct inode *inode)
 	BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item);
 
 	alloc_group_block = btrfs_inode_block_group(leaf, inode_item);
-	if (location.objectid == BTRFS_FREE_SPACE_OBJECTID)
-		inode->i_mapping->flags &= ~__GFP_FS;
 
 	/*
 	 * try to precache a NULL acl entry for files that don't have
@@ -2595,6 +2594,13 @@ static void fill_inode_item(struct btrfs_trans_handle *trans,
 			    struct btrfs_inode_item *item,
 			    struct inode *inode)
 {
+	if (!leaf->map_token)
+		map_private_extent_buffer(leaf, (unsigned long)item,
+					  sizeof(struct btrfs_inode_item),
+					  &leaf->map_token, &leaf->kaddr,
+					  &leaf->map_start, &leaf->map_len,
+					  KM_USER1);
+
 	btrfs_set_inode_uid(leaf, item, inode->i_uid);
 	btrfs_set_inode_gid(leaf, item, inode->i_gid);
 	btrfs_set_inode_size(leaf, item, BTRFS_I(inode)->disk_i_size);
@@ -2623,6 +2629,11 @@ static void fill_inode_item(struct btrfs_trans_handle *trans,
 	btrfs_set_inode_rdev(leaf, item, inode->i_rdev);
 	btrfs_set_inode_flags(leaf, item, BTRFS_I(inode)->flags);
 	btrfs_set_inode_block_group(leaf, item, BTRFS_I(inode)->block_group);
+
+	if (leaf->map_token) {
+		unmap_extent_buffer(leaf, leaf->map_token, KM_USER1);
+		leaf->map_token = NULL;
+	}
 }
 
 /*
@@ -4212,10 +4223,8 @@ static int btrfs_real_readdir(struct file *filp, void *dirent,
 	struct btrfs_key found_key;
 	struct btrfs_path *path;
 	int ret;
-	u32 nritems;
 	struct extent_buffer *leaf;
 	int slot;
-	int advance;
 	unsigned char d_type;
 	int over = 0;
 	u32 di_cur;
@@ -4258,27 +4267,19 @@ static int btrfs_real_readdir(struct file *filp, void *dirent,
 	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
 	if (ret < 0)
 		goto err;
-	advance = 0;
 
 	while (1) {
 		leaf = path->nodes[0];
-		nritems = btrfs_header_nritems(leaf);
 		slot = path->slots[0];
-		if (advance || slot >= nritems) {
-			if (slot >= nritems - 1) {
-				ret = btrfs_next_leaf(root, path);
-				if (ret)
-					break;
-				leaf = path->nodes[0];
-				nritems = btrfs_header_nritems(leaf);
-				slot = path->slots[0];
-			} else {
-				slot++;
-				path->slots[0]++;
-			}
+		if (slot >= btrfs_header_nritems(leaf)) {
+			ret = btrfs_next_leaf(root, path);
+			if (ret < 0)
+				goto err;
+			else if (ret > 0)
+				break;
+			continue;
 		}
 
-		advance = 1;
 		item = btrfs_item_nr(leaf, slot);
 		btrfs_item_key_to_cpu(leaf, &found_key, slot);
 
@@ -4287,7 +4288,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent,
 		if (btrfs_key_type(&found_key) != key_type)
 			break;
 		if (found_key.offset < filp->f_pos)
-			continue;
+			goto next;
 
 		filp->f_pos = found_key.offset;
 
@@ -4340,6 +4341,8 @@ skip:
 			di_cur += di_len;
 			di = (struct btrfs_dir_item *)((char *)di + di_len);
 		}
+next:
+		path->slots[0]++;
 	}
 
 	/* Reached end of directory/root. Bump pos past the last item. */
@@ -4532,14 +4535,17 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 	BUG_ON(!path);
 
 	inode = new_inode(root->fs_info->sb);
-	if (!inode)
+	if (!inode) {
+		btrfs_free_path(path);
 		return ERR_PTR(-ENOMEM);
+	}
 
 	if (dir) {
 		trace_btrfs_inode_request(dir);
 
 		ret = btrfs_set_inode_index(dir, index);
 		if (ret) {
+			btrfs_free_path(path);
 			iput(inode);
 			return ERR_PTR(ret);
 		}
@@ -4726,9 +4732,10 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
 				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, mode, &index);
-	err = PTR_ERR(inode);
-	if (IS_ERR(inode))
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
 		goto out_unlock;
+	}
 
 	err = btrfs_init_inode_security(trans, inode, dir, &dentry->d_name);
 	if (err) {
@@ -4787,9 +4794,10 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
 				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, mode, &index);
-	err = PTR_ERR(inode);
-	if (IS_ERR(inode))
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
 		goto out_unlock;
+	}
 
 	err = btrfs_init_inode_security(trans, inode, dir, &dentry->d_name);
 	if (err) {
@@ -4839,9 +4847,6 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 	if (inode->i_nlink == ~0U)
 		return -EMLINK;
 
-	btrfs_inc_nlink(inode);
-	inode->i_ctime = CURRENT_TIME;
-
 	err = btrfs_set_inode_index(dir, &index);
 	if (err)
 		goto fail;
@@ -4857,6 +4862,9 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 		goto fail;
 	}
 
+	btrfs_inc_nlink(inode);
+	inode->i_ctime = CURRENT_TIME;
+
 	btrfs_set_trans_block_group(trans, dir);
 	ihold(inode);
 
@@ -4994,6 +5002,8 @@ static noinline int uncompress_inline(struct btrfs_path *path,
 	inline_size = btrfs_file_extent_inline_item_len(leaf,
 					btrfs_item_nr(leaf, path->slots[0]));
 	tmp = kmalloc(inline_size, GFP_NOFS);
+	if (!tmp)
+		return -ENOMEM;
 	ptr = btrfs_file_extent_inline_start(item);
 
 	read_extent_buffer(leaf, tmp, ptr, inline_size);
@@ -5226,7 +5236,7 @@ again:
 			btrfs_mark_buffer_dirty(leaf);
 		}
 		set_extent_uptodate(io_tree, em->start,
-				    extent_map_end(em) - 1, GFP_NOFS);
+				    extent_map_end(em) - 1, NULL, GFP_NOFS);
 		goto insert;
 	} else {
 		printk(KERN_ERR "btrfs unknown found_type %d\n", found_type);
@@ -5433,17 +5443,30 @@ out:
 }
 
 static struct extent_map *btrfs_new_extent_direct(struct inode *inode,
+						  struct extent_map *em,
 						  u64 start, u64 len)
 {
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_trans_handle *trans;
-	struct extent_map *em;
 	struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
 	struct btrfs_key ins;
 	u64 alloc_hint;
 	int ret;
+	bool insert = false;
 
-	btrfs_drop_extent_cache(inode, start, start + len - 1, 0);
+	/*
+	 * Ok if the extent map we looked up is a hole and is for the exact
+	 * range we want, there is no reason to allocate a new one, however if
+	 * it is not right then we need to free this one and drop the cache for
+	 * our range.
+	 */
+	if (em->block_start != EXTENT_MAP_HOLE || em->start != start ||
+	    em->len != len) {
+		free_extent_map(em);
+		em = NULL;
+		insert = true;
+		btrfs_drop_extent_cache(inode, start, start + len - 1, 0);
+	}
 
 	trans = btrfs_join_transaction(root, 0);
 	if (IS_ERR(trans))
@@ -5459,10 +5482,12 @@ static struct extent_map *btrfs_new_extent_direct(struct inode *inode,
 		goto out;
 	}
 
-	em = alloc_extent_map(GFP_NOFS);
 	if (!em) {
-		em = ERR_PTR(-ENOMEM);
-		goto out;
+		em = alloc_extent_map(GFP_NOFS);
+		if (!em) {
+			em = ERR_PTR(-ENOMEM);
+			goto out;
+		}
 	}
 
 	em->start = start;
@@ -5472,9 +5497,15 @@ static struct extent_map *btrfs_new_extent_direct(struct inode *inode,
 	em->block_start = ins.objectid;
 	em->block_len = ins.offset;
 	em->bdev = root->fs_info->fs_devices->latest_bdev;
+
+	/*
+	 * We need to do this because if we're using the original em we searched
+	 * for, we could have EXTENT_FLAG_VACANCY set, and we don't want that.
+	 */
+	em->flags = 0;
 	set_bit(EXTENT_FLAG_PINNED, &em->flags);
 
-	while (1) {
+	while (insert) {
 		write_lock(&em_tree->lock);
 		ret = add_extent_mapping(em_tree, em);
 		write_unlock(&em_tree->lock);
@@ -5692,8 +5723,7 @@ must_cow:
 	 * it above
 	 */
 	len = bh_result->b_size;
-	free_extent_map(em);
-	em = btrfs_new_extent_direct(inode, start, len);
+	em = btrfs_new_extent_direct(inode, em, start, len);
 	if (IS_ERR(em))
 		return PTR_ERR(em);
 	len = min(len, em->len - (start - em->start));
@@ -5856,8 +5886,10 @@ again:
 	}
 
 	add_pending_csums(trans, inode, ordered->file_offset, &ordered->list);
-	btrfs_ordered_update_i_size(inode, 0, ordered);
-	btrfs_update_inode(trans, root, inode);
+	ret = btrfs_ordered_update_i_size(inode, 0, ordered);
+	if (!ret)
+		btrfs_update_inode(trans, root, inode);
+	ret = 0;
 out_unlock:
 	unlock_extent_cached(&BTRFS_I(inode)->io_tree, ordered->file_offset,
 			     ordered->file_offset + ordered->len - 1,
@@ -5943,7 +5975,7 @@ static struct bio *btrfs_dio_bio_alloc(struct block_device *bdev,
 
 static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode,
 					 int rw, u64 file_offset, int skip_sum,
-					 u32 *csums)
+					 u32 *csums, int async_submit)
 {
 	int write = rw & REQ_WRITE;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
@@ -5954,13 +5986,24 @@ static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode,
 	if (ret)
 		goto err;
 
-	if (write && !skip_sum) {
+	if (skip_sum)
+		goto map;
+
+	if (write && async_submit) {
 		ret = btrfs_wq_submit_bio(root->fs_info,
 				   inode, rw, bio, 0, 0,
 				   file_offset,
 				   __btrfs_submit_bio_start_direct_io,
 				   __btrfs_submit_bio_done);
 		goto err;
+	} else if (write) {
+		/*
+		 * If we aren't doing async submit, calculate the csum of the
+		 * bio now.
+		 */
+		ret = btrfs_csum_one_bio(root, inode, bio, file_offset, 1);
+		if (ret)
+			goto err;
 	} else if (!skip_sum) {
 		ret = btrfs_lookup_bio_sums_dio(root, inode, bio,
 					  file_offset, csums);
@@ -5968,7 +6011,8 @@ static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode,
 			goto err;
 	}
 
-	ret = btrfs_map_bio(root, rw, bio, 0, 1);
+map:
+	ret = btrfs_map_bio(root, rw, bio, 0, async_submit);
 err:
 	bio_put(bio);
 	return ret;
@@ -5990,23 +6034,30 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip,
 	int nr_pages = 0;
 	u32 *csums = dip->csums;
 	int ret = 0;
+	int async_submit = 0;
 	int write = rw & REQ_WRITE;
 
-	bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, start_sector, GFP_NOFS);
-	if (!bio)
-		return -ENOMEM;
-	bio->bi_private = dip;
-	bio->bi_end_io = btrfs_end_dio_bio;
-	atomic_inc(&dip->pending_bios);
-
 	map_length = orig_bio->bi_size;
 	ret = btrfs_map_block(map_tree, READ, start_sector << 9,
 			      &map_length, NULL, 0);
 	if (ret) {
-		bio_put(bio);
+		bio_put(orig_bio);
 		return -EIO;
 	}
 
+	if (map_length >= orig_bio->bi_size) {
+		bio = orig_bio;
+		goto submit;
+	}
+
+	async_submit = 1;
+	bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, start_sector, GFP_NOFS);
+	if (!bio)
+		return -ENOMEM;
+	bio->bi_private = dip;
+	bio->bi_end_io = btrfs_end_dio_bio;
+	atomic_inc(&dip->pending_bios);
+
 	while (bvec <= (orig_bio->bi_io_vec + orig_bio->bi_vcnt - 1)) {
 		if (unlikely(map_length < submit_len + bvec->bv_len ||
 		    bio_add_page(bio, bvec->bv_page, bvec->bv_len,
@@ -6020,7 +6071,7 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip,
 			atomic_inc(&dip->pending_bios);
 			ret = __btrfs_submit_dio_bio(bio, inode, rw,
 						     file_offset, skip_sum,
-						     csums);
+						     csums, async_submit);
 			if (ret) {
 				bio_put(bio);
 				atomic_dec(&dip->pending_bios);
@@ -6057,8 +6108,9 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip,
 		}
 	}
 
+submit:
 	ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum,
-				     csums);
+				     csums, async_submit);
 	if (!ret)
 		return 0;
 
@@ -6153,6 +6205,7 @@ static ssize_t check_direct_IO(struct btrfs_root *root, int rw, struct kiocb *io
 			unsigned long nr_segs)
 {
 	int seg;
+	int i;
 	size_t size;
 	unsigned long addr;
 	unsigned blocksize_mask = root->sectorsize - 1;
@@ -6167,8 +6220,22 @@ static ssize_t check_direct_IO(struct btrfs_root *root, int rw, struct kiocb *io
 		addr = (unsigned long)iov[seg].iov_base;
 		size = iov[seg].iov_len;
 		end += size;
-		if ((addr & blocksize_mask) || (size & blocksize_mask)) 
+		if ((addr & blocksize_mask) || (size & blocksize_mask))
 			goto out;
+
+		/* If this is a write we don't need to check anymore */
+		if (rw & WRITE)
+			continue;
+
+		/*
+		 * Check to make sure we don't have duplicate iov_base's in this
+		 * iovec, if so return EINVAL, otherwise we'll get csum errors
+		 * when reading back.
+		 */
+		for (i = seg + 1; i < nr_segs; i++) {
+			if (iov[seg].iov_base == iov[i].iov_base)
+				goto out;
+		}
 	}
 	retval = 0;
 out:
@@ -6960,8 +7027,10 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	 * should cover the worst case number of items we'll modify.
 	 */
 	trans = btrfs_start_transaction(root, 20);
-	if (IS_ERR(trans))
-		return PTR_ERR(trans);
+	if (IS_ERR(trans)) {
+                ret = PTR_ERR(trans);
+                goto out_notrans;
+        }
 
 	btrfs_set_trans_block_group(trans, new_dir);
 
@@ -7061,7 +7130,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	}
 out_fail:
 	btrfs_end_transaction_throttle(trans, root);
-
+out_notrans:
 	if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
 		up_read(&root->fs_info->subvol_sem);
 
@@ -7209,9 +7278,10 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
 				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO,
 				&index);
-	err = PTR_ERR(inode);
-	if (IS_ERR(inode))
+	if (IS_ERR(inode)) {
+		err = PTR_ERR(inode);
 		goto out_unlock;
+	}
 
 	err = btrfs_init_inode_security(trans, inode, dir, &dentry->d_name);
 	if (err) {
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 7c07fe26b7c..2616f7ed479 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -81,6 +81,13 @@ static unsigned int btrfs_flags_to_ioctl(unsigned int flags)
 		iflags |= FS_NOATIME_FL;
 	if (flags & BTRFS_INODE_DIRSYNC)
 		iflags |= FS_DIRSYNC_FL;
+	if (flags & BTRFS_INODE_NODATACOW)
+		iflags |= FS_NOCOW_FL;
+
+	if ((flags & BTRFS_INODE_COMPRESS) && !(flags & BTRFS_INODE_NOCOMPRESS))
+		iflags |= FS_COMPR_FL;
+	else if (flags & BTRFS_INODE_NOCOMPRESS)
+		iflags |= FS_NOCOMP_FL;
 
 	return iflags;
 }
@@ -144,16 +151,13 @@ static int check_flags(unsigned int flags)
 	if (flags & ~(FS_IMMUTABLE_FL | FS_APPEND_FL | \
 		      FS_NOATIME_FL | FS_NODUMP_FL | \
 		      FS_SYNC_FL | FS_DIRSYNC_FL | \
-		      FS_NOCOMP_FL | FS_COMPR_FL | \
-		      FS_NOCOW_FL | FS_COW_FL))
+		      FS_NOCOMP_FL | FS_COMPR_FL |
+		      FS_NOCOW_FL))
 		return -EOPNOTSUPP;
 
 	if ((flags & FS_NOCOMP_FL) && (flags & FS_COMPR_FL))
 		return -EINVAL;
 
-	if ((flags & FS_NOCOW_FL) && (flags & FS_COW_FL))
-		return -EINVAL;
-
 	return 0;
 }
 
@@ -218,6 +222,10 @@ static int btrfs_ioctl_setflags(struct file *file, void __user *arg)
 		ip->flags |= BTRFS_INODE_DIRSYNC;
 	else
 		ip->flags &= ~BTRFS_INODE_DIRSYNC;
+	if (flags & FS_NOCOW_FL)
+		ip->flags |= BTRFS_INODE_NODATACOW;
+	else
+		ip->flags &= ~BTRFS_INODE_NODATACOW;
 
 	/*
 	 * The COMPRESS flag can only be changed by users, while the NOCOMPRESS
@@ -230,11 +238,9 @@ static int btrfs_ioctl_setflags(struct file *file, void __user *arg)
 	} else if (flags & FS_COMPR_FL) {
 		ip->flags |= BTRFS_INODE_COMPRESS;
 		ip->flags &= ~BTRFS_INODE_NOCOMPRESS;
+	} else {
+		ip->flags &= ~(BTRFS_INODE_COMPRESS | BTRFS_INODE_NOCOMPRESS);
 	}
-	if (flags & FS_NOCOW_FL)
-		ip->flags |= BTRFS_INODE_NODATACOW;
-	else if (flags & FS_COW_FL)
-		ip->flags &= ~BTRFS_INODE_NODATACOW;
 
 	trans = btrfs_join_transaction(root, 1);
 	BUG_ON(IS_ERR(trans));
@@ -373,6 +379,10 @@ static noinline int create_subvol(struct btrfs_root *root,
 	inode_item->nbytes = cpu_to_le64(root->leafsize);
 	inode_item->mode = cpu_to_le32(S_IFDIR | 0755);
 
+	root_item.flags = 0;
+	root_item.byte_limit = 0;
+	inode_item->flags = cpu_to_le64(BTRFS_INODE_ROOT_ITEM_INIT);
+
 	btrfs_set_root_bytenr(&root_item, leaf->start);
 	btrfs_set_root_generation(&root_item, trans->transid);
 	btrfs_set_root_level(&root_item, 0);
@@ -2283,7 +2293,7 @@ long btrfs_ioctl_space_info(struct btrfs_root *root, void __user *arg)
 	struct btrfs_ioctl_space_info space;
 	struct btrfs_ioctl_space_info *dest;
 	struct btrfs_ioctl_space_info *dest_orig;
-	struct btrfs_ioctl_space_info *user_dest;
+	struct btrfs_ioctl_space_info __user *user_dest;
 	struct btrfs_space_info *info;
 	u64 types[] = {BTRFS_BLOCK_GROUP_DATA,
 		       BTRFS_BLOCK_GROUP_SYSTEM,
@@ -2436,8 +2446,10 @@ static noinline long btrfs_ioctl_start_sync(struct file *file, void __user *argp
 		return PTR_ERR(trans);
 	transid = trans->transid;
 	ret = btrfs_commit_transaction_async(trans, root, 0);
-	if (ret)
+	if (ret) {
+		btrfs_end_transaction(trans, root);
 		return ret;
+	}
 
 	if (argp)
 		if (copy_to_user(argp, &transid, sizeof(transid)))
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 58250e09eb0..199a8013431 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -2346,7 +2346,7 @@ struct btrfs_root *select_one_root(struct btrfs_trans_handle *trans,
 		root = next->root;
 		BUG_ON(!root);
 
-		/* no other choice for non-refernce counted tree */
+		/* no other choice for non-references counted tree */
 		if (!root->ref_cows)
 			return root;
 
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index 29b2d7c930e..6928bff62da 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -473,3 +473,21 @@ again:
 	btrfs_free_path(path);
 	return 0;
 }
+
+/*
+ * Old btrfs forgets to init root_item->flags and root_item->byte_limit
+ * for subvolumes. To work around this problem, we steal a bit from
+ * root_item->inode_item->flags, and use it to indicate if those fields
+ * have been properly initialized.
+ */
+void btrfs_check_and_init_root_item(struct btrfs_root_item *root_item)
+{
+	u64 inode_flags = le64_to_cpu(root_item->inode.flags);
+
+	if (!(inode_flags & BTRFS_INODE_ROOT_ITEM_INIT)) {
+		inode_flags |= BTRFS_INODE_ROOT_ITEM_INIT;
+		root_item->inode.flags = cpu_to_le64(inode_flags);
+		root_item->flags = 0;
+		root_item->byte_limit = 0;
+	}
+}
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 2edfc039f09..0ac712efcdf 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -159,7 +159,7 @@ enum {
 	Opt_compress_type, Opt_compress_force, Opt_compress_force_type,
 	Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_discard,
 	Opt_space_cache, Opt_clear_cache, Opt_user_subvol_rm_allowed,
-	Opt_enospc_debug, Opt_err,
+	Opt_enospc_debug, Opt_subvolrootid, Opt_err,
 };
 
 static match_table_t tokens = {
@@ -189,6 +189,7 @@ static match_table_t tokens = {
 	{Opt_clear_cache, "clear_cache"},
 	{Opt_user_subvol_rm_allowed, "user_subvol_rm_allowed"},
 	{Opt_enospc_debug, "enospc_debug"},
+	{Opt_subvolrootid, "subvolrootid=%d"},
 	{Opt_err, NULL},
 };
 
@@ -232,6 +233,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 			break;
 		case Opt_subvol:
 		case Opt_subvolid:
+		case Opt_subvolrootid:
 		case Opt_device:
 			/*
 			 * These are parsed by btrfs_parse_early_options
@@ -388,7 +390,7 @@ out:
  */
 static int btrfs_parse_early_options(const char *options, fmode_t flags,
 		void *holder, char **subvol_name, u64 *subvol_objectid,
-		struct btrfs_fs_devices **fs_devices)
+		u64 *subvol_rootid, struct btrfs_fs_devices **fs_devices)
 {
 	substring_t args[MAX_OPT_ARGS];
 	char *opts, *orig, *p;
@@ -429,6 +431,18 @@ static int btrfs_parse_early_options(const char *options, fmode_t flags,
 					*subvol_objectid = intarg;
 			}
 			break;
+		case Opt_subvolrootid:
+			intarg = 0;
+			error = match_int(&args[0], &intarg);
+			if (!error) {
+				/* we want the original fs_tree */
+				if (!intarg)
+					*subvol_rootid =
+						BTRFS_FS_TREE_OBJECTID;
+				else
+					*subvol_rootid = intarg;
+			}
+			break;
 		case Opt_device:
 			error = btrfs_scan_one_device(match_strdup(&args[0]),
 					flags, holder, fs_devices);
@@ -644,6 +658,7 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 {
 	struct btrfs_root *root = btrfs_sb(vfs->mnt_sb);
 	struct btrfs_fs_info *info = root->fs_info;
+	char *compress_type;
 
 	if (btrfs_test_opt(root, DEGRADED))
 		seq_puts(seq, ",degraded");
@@ -662,8 +677,16 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (info->thread_pool_size !=  min_t(unsigned long,
 					     num_online_cpus() + 2, 8))
 		seq_printf(seq, ",thread_pool=%d", info->thread_pool_size);
-	if (btrfs_test_opt(root, COMPRESS))
-		seq_puts(seq, ",compress");
+	if (btrfs_test_opt(root, COMPRESS)) {
+		if (info->compress_type == BTRFS_COMPRESS_ZLIB)
+			compress_type = "zlib";
+		else
+			compress_type = "lzo";
+		if (btrfs_test_opt(root, FORCE_COMPRESS))
+			seq_printf(seq, ",compress-force=%s", compress_type);
+		else
+			seq_printf(seq, ",compress=%s", compress_type);
+	}
 	if (btrfs_test_opt(root, NOSSD))
 		seq_puts(seq, ",nossd");
 	if (btrfs_test_opt(root, SSD_SPREAD))
@@ -678,6 +701,12 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 		seq_puts(seq, ",discard");
 	if (!(root->fs_info->sb->s_flags & MS_POSIXACL))
 		seq_puts(seq, ",noacl");
+	if (btrfs_test_opt(root, SPACE_CACHE))
+		seq_puts(seq, ",space_cache");
+	if (btrfs_test_opt(root, CLEAR_CACHE))
+		seq_puts(seq, ",clear_cache");
+	if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED))
+		seq_puts(seq, ",user_subvol_rm_allowed");
 	return 0;
 }
 
@@ -721,6 +750,7 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
 	fmode_t mode = FMODE_READ;
 	char *subvol_name = NULL;
 	u64 subvol_objectid = 0;
+	u64 subvol_rootid = 0;
 	int error = 0;
 
 	if (!(flags & MS_RDONLY))
@@ -728,7 +758,7 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
 
 	error = btrfs_parse_early_options(data, mode, fs_type,
 					  &subvol_name, &subvol_objectid,
-					  &fs_devices);
+					  &subvol_rootid, &fs_devices);
 	if (error)
 		return ERR_PTR(error);
 
@@ -792,15 +822,17 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
 		s->s_flags |= MS_ACTIVE;
 	}
 
-	root = get_default_root(s, subvol_objectid);
-	if (IS_ERR(root)) {
-		error = PTR_ERR(root);
-		deactivate_locked_super(s);
-		goto error_free_subvol_name;
-	}
 	/* if they gave us a subvolume name bind mount into that */
 	if (strcmp(subvol_name, ".")) {
 		struct dentry *new_root;
+
+		root = get_default_root(s, subvol_rootid);
+		if (IS_ERR(root)) {
+			error = PTR_ERR(root);
+			deactivate_locked_super(s);
+			goto error_free_subvol_name;
+		}
+
 		mutex_lock(&root->d_inode->i_mutex);
 		new_root = lookup_one_len(subvol_name, root,
 				      strlen(subvol_name));
@@ -821,6 +853,13 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
 		}
 		dput(root);
 		root = new_root;
+	} else {
+		root = get_default_root(s, subvol_objectid);
+		if (IS_ERR(root)) {
+			error = PTR_ERR(root);
+			deactivate_locked_super(s);
+			goto error_free_subvol_name;
+		}
 	}
 
 	kfree(subvol_name);
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index ce48eb59d61..c571734d5e5 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -32,10 +32,8 @@
 
 static noinline void put_transaction(struct btrfs_transaction *transaction)
 {
-	WARN_ON(transaction->use_count == 0);
-	transaction->use_count--;
-	if (transaction->use_count == 0) {
-		list_del_init(&transaction->list);
+	WARN_ON(atomic_read(&transaction->use_count) == 0);
+	if (atomic_dec_and_test(&transaction->use_count)) {
 		memset(transaction, 0, sizeof(*transaction));
 		kmem_cache_free(btrfs_transaction_cachep, transaction);
 	}
@@ -60,14 +58,14 @@ static noinline int join_transaction(struct btrfs_root *root)
 		if (!cur_trans)
 			return -ENOMEM;
 		root->fs_info->generation++;
-		cur_trans->num_writers = 1;
+		atomic_set(&cur_trans->num_writers, 1);
 		cur_trans->num_joined = 0;
 		cur_trans->transid = root->fs_info->generation;
 		init_waitqueue_head(&cur_trans->writer_wait);
 		init_waitqueue_head(&cur_trans->commit_wait);
 		cur_trans->in_commit = 0;
 		cur_trans->blocked = 0;
-		cur_trans->use_count = 1;
+		atomic_set(&cur_trans->use_count, 1);
 		cur_trans->commit_done = 0;
 		cur_trans->start_time = get_seconds();
 
@@ -88,7 +86,7 @@ static noinline int join_transaction(struct btrfs_root *root)
 		root->fs_info->running_transaction = cur_trans;
 		spin_unlock(&root->fs_info->new_trans_lock);
 	} else {
-		cur_trans->num_writers++;
+		atomic_inc(&cur_trans->num_writers);
 		cur_trans->num_joined++;
 	}
 
@@ -145,7 +143,7 @@ static void wait_current_trans(struct btrfs_root *root)
 	cur_trans = root->fs_info->running_transaction;
 	if (cur_trans && cur_trans->blocked) {
 		DEFINE_WAIT(wait);
-		cur_trans->use_count++;
+		atomic_inc(&cur_trans->use_count);
 		while (1) {
 			prepare_to_wait(&root->fs_info->transaction_wait, &wait,
 					TASK_UNINTERRUPTIBLE);
@@ -181,6 +179,7 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
 {
 	struct btrfs_trans_handle *h;
 	struct btrfs_transaction *cur_trans;
+	int retries = 0;
 	int ret;
 
 	if (root->fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR)
@@ -197,13 +196,14 @@ again:
 
 	ret = join_transaction(root);
 	if (ret < 0) {
+		kmem_cache_free(btrfs_trans_handle_cachep, h);
 		if (type != TRANS_JOIN_NOLOCK)
 			mutex_unlock(&root->fs_info->trans_mutex);
 		return ERR_PTR(ret);
 	}
 
 	cur_trans = root->fs_info->running_transaction;
-	cur_trans->use_count++;
+	atomic_inc(&cur_trans->use_count);
 	if (type != TRANS_JOIN_NOLOCK)
 		mutex_unlock(&root->fs_info->trans_mutex);
 
@@ -223,10 +223,18 @@ again:
 
 	if (num_items > 0) {
 		ret = btrfs_trans_reserve_metadata(h, root, num_items);
-		if (ret == -EAGAIN) {
+		if (ret == -EAGAIN && !retries) {
+			retries++;
 			btrfs_commit_transaction(h, root);
 			goto again;
+		} else if (ret == -EAGAIN) {
+			/*
+			 * We have already retried and got EAGAIN, so really we
+			 * don't have space, so set ret to -ENOSPC.
+			 */
+			ret = -ENOSPC;
 		}
+
 		if (ret < 0) {
 			btrfs_end_transaction(h, root);
 			return ERR_PTR(ret);
@@ -326,7 +334,7 @@ int btrfs_wait_for_commit(struct btrfs_root *root, u64 transid)
 			goto out_unlock;  /* nothing committing|committed */
 	}
 
-	cur_trans->use_count++;
+	atomic_inc(&cur_trans->use_count);
 	mutex_unlock(&root->fs_info->trans_mutex);
 
 	wait_for_commit(root, cur_trans);
@@ -456,18 +464,14 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
 			wake_up_process(info->transaction_kthread);
 	}
 
-	if (lock)
-		mutex_lock(&info->trans_mutex);
 	WARN_ON(cur_trans != info->running_transaction);
-	WARN_ON(cur_trans->num_writers < 1);
-	cur_trans->num_writers--;
+	WARN_ON(atomic_read(&cur_trans->num_writers) < 1);
+	atomic_dec(&cur_trans->num_writers);
 
 	smp_mb();
 	if (waitqueue_active(&cur_trans->writer_wait))
 		wake_up(&cur_trans->writer_wait);
 	put_transaction(cur_trans);
-	if (lock)
-		mutex_unlock(&info->trans_mutex);
 
 	if (current->journal_info == trans)
 		current->journal_info = NULL;
@@ -975,6 +979,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	record_root_in_trans(trans, root);
 	btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
 	memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
+	btrfs_check_and_init_root_item(new_root_item);
 
 	root_flags = btrfs_root_flags(new_root_item);
 	if (pending->readonly)
@@ -1176,7 +1181,7 @@ int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans,
 	/* take transaction reference */
 	mutex_lock(&root->fs_info->trans_mutex);
 	cur_trans = trans->transaction;
-	cur_trans->use_count++;
+	atomic_inc(&cur_trans->use_count);
 	mutex_unlock(&root->fs_info->trans_mutex);
 
 	btrfs_end_transaction(trans, root);
@@ -1235,7 +1240,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 	mutex_lock(&root->fs_info->trans_mutex);
 	if (cur_trans->in_commit) {
-		cur_trans->use_count++;
+		atomic_inc(&cur_trans->use_count);
 		mutex_unlock(&root->fs_info->trans_mutex);
 		btrfs_end_transaction(trans, root);
 
@@ -1257,7 +1262,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 		prev_trans = list_entry(cur_trans->list.prev,
 					struct btrfs_transaction, list);
 		if (!prev_trans->commit_done) {
-			prev_trans->use_count++;
+			atomic_inc(&prev_trans->use_count);
 			mutex_unlock(&root->fs_info->trans_mutex);
 
 			wait_for_commit(root, prev_trans);
@@ -1298,14 +1303,14 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 				TASK_UNINTERRUPTIBLE);
 
 		smp_mb();
-		if (cur_trans->num_writers > 1)
+		if (atomic_read(&cur_trans->num_writers) > 1)
 			schedule_timeout(MAX_SCHEDULE_TIMEOUT);
 		else if (should_grow)
 			schedule_timeout(1);
 
 		mutex_lock(&root->fs_info->trans_mutex);
 		finish_wait(&cur_trans->writer_wait, &wait);
-	} while (cur_trans->num_writers > 1 ||
+	} while (atomic_read(&cur_trans->num_writers) > 1 ||
 		 (should_grow && cur_trans->num_joined != joined));
 
 	ret = create_pending_snapshots(trans, root->fs_info);
@@ -1392,6 +1397,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 	wake_up(&cur_trans->commit_wait);
 
+	list_del_init(&cur_trans->list);
 	put_transaction(cur_trans);
 	put_transaction(cur_trans);
 
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 229a594cacd..e441acc6c58 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -27,11 +27,11 @@ struct btrfs_transaction {
 	 * total writers in this transaction, it must be zero before the
 	 * transaction can end
 	 */
-	unsigned long num_writers;
+	atomic_t num_writers;
 
 	unsigned long num_joined;
 	int in_commit;
-	int use_count;
+	atomic_t use_count;
 	int commit_done;
 	int blocked;
 	struct list_head list;
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c50271ad315..f997ec0c1ba 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2209,8 +2209,10 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans,
 
 	log = root->log_root;
 	path = btrfs_alloc_path();
-	if (!path)
-		return -ENOMEM;
+	if (!path) {
+		err = -ENOMEM;
+		goto out_unlock;
+	}
 
 	di = btrfs_lookup_dir_item(trans, log, path, dir->i_ino,
 				   name, name_len, -1);
@@ -2271,6 +2273,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans,
 	}
 fail:
 	btrfs_free_path(path);
+out_unlock:
 	mutex_unlock(&BTRFS_I(dir)->log_mutex);
 	if (ret == -ENOSPC) {
 		root->fs_info->last_trans_log_full_commit = trans->transid;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 309a57b9fc8..c7367ae5a3e 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -155,6 +155,15 @@ static noinline int run_scheduled_bios(struct btrfs_device *device)
 	unsigned long limit;
 	unsigned long last_waited = 0;
 	int force_reg = 0;
+	struct blk_plug plug;
+
+	/*
+	 * this function runs all the bios we've collected for
+	 * a particular device.  We don't want to wander off to
+	 * another device without first sending all of these down.
+	 * So, setup a plug here and finish it off before we return
+	 */
+	blk_start_plug(&plug);
 
 	bdi = blk_get_backing_dev_info(device->bdev);
 	fs_info = device->dev_root->fs_info;
@@ -294,6 +303,7 @@ loop_lock:
 	spin_unlock(&device->io_lock);
 
 done:
+	blk_finish_plug(&plug);
 	return 0;
 }
 
diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c
index a5303b871b1..cfd660550de 100644
--- a/fs/btrfs/xattr.c
+++ b/fs/btrfs/xattr.c
@@ -180,11 +180,10 @@ ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size)
 	struct btrfs_path *path;
 	struct extent_buffer *leaf;
 	struct btrfs_dir_item *di;
-	int ret = 0, slot, advance;
+	int ret = 0, slot;
 	size_t total_size = 0, size_left = size;
 	unsigned long name_ptr;
 	size_t name_len;
-	u32 nritems;
 
 	/*
 	 * ok we want all objects associated with this id.
@@ -204,34 +203,24 @@ ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size)
 	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
 	if (ret < 0)
 		goto err;
-	advance = 0;
+
 	while (1) {
 		leaf = path->nodes[0];
-		nritems = btrfs_header_nritems(leaf);
 		slot = path->slots[0];
 
 		/* this is where we start walking through the path */
-		if (advance || slot >= nritems) {
+		if (slot >= btrfs_header_nritems(leaf)) {
 			/*
 			 * if we've reached the last slot in this leaf we need
 			 * to go to the next leaf and reset everything
 			 */
-			if (slot >= nritems-1) {
-				ret = btrfs_next_leaf(root, path);
-				if (ret)
-					break;
-				leaf = path->nodes[0];
-				nritems = btrfs_header_nritems(leaf);
-				slot = path->slots[0];
-			} else {
-				/*
-				 * just walking through the slots on this leaf
-				 */
-				slot++;
-				path->slots[0]++;
-			}
+			ret = btrfs_next_leaf(root, path);
+			if (ret < 0)
+				goto err;
+			else if (ret > 0)
+				break;
+			continue;
 		}
-		advance = 1;
 
 		btrfs_item_key_to_cpu(leaf, &found_key, slot);
 
@@ -250,7 +239,7 @@ ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size)
 
 		/* we are just looking for how big our buffer needs to be */
 		if (!size)
-			continue;
+			goto next;
 
 		if (!buffer || (name_len + 1) > size_left) {
 			ret = -ERANGE;
@@ -263,6 +252,8 @@ ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size)
 
 		size_left -= name_len + 1;
 		buffer += name_len + 1;
+next:
+		path->slots[0]++;
 	}
 	ret = total_size;
 
diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c
index 37fe101a4e0..1064805e653 100644
--- a/fs/cachefiles/interface.c
+++ b/fs/cachefiles/interface.c
@@ -197,7 +197,7 @@ struct fscache_object *cachefiles_grab_object(struct fscache_object *_object)
 }
 
 /*
- * update the auxilliary data for an object object on disk
+ * update the auxiliary data for an object object on disk
  */
 static void cachefiles_update_object(struct fscache_object *_object)
 {
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 37368ba2e67..38b8ab55492 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -24,7 +24,7 @@
  * context needs to be associated with the osd write during writeback.
  *
  * Similarly, struct ceph_inode_info maintains a set of counters to
- * count dirty pages on the inode.  In the absense of snapshots,
+ * count dirty pages on the inode.  In the absence of snapshots,
  * i_wrbuffer_ref == i_wrbuffer_ref_head == the dirty page count.
  *
  * When a snapshot is taken (that is, when the client receives
@@ -775,6 +775,13 @@ get_more_pages:
 					    ci->i_truncate_seq,
 					    ci->i_truncate_size,
 					    &inode->i_mtime, true, 1, 0);
+
+				if (!req) {
+					rc = -ENOMEM;
+					unlock_page(page);
+					break;
+				}
+
 				max_pages = req->r_num_pages;
 
 				alloc_page_vec(fsc, req);
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 6b61ded701e..2a5404c1c42 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -765,7 +765,7 @@ int __ceph_caps_issued_mask(struct ceph_inode_info *ci, int mask, int touch)
 			if (touch) {
 				struct rb_node *q;
 
-				/* touch this + preceeding caps */
+				/* touch this + preceding caps */
 				__touch_cap(cap);
 				for (q = rb_first(&ci->i_caps); q != p;
 				     q = rb_next(q)) {
@@ -819,7 +819,7 @@ int __ceph_caps_used(struct ceph_inode_info *ci)
 		used |= CEPH_CAP_FILE_CACHE;
 	if (ci->i_wr_ref)
 		used |= CEPH_CAP_FILE_WR;
-	if (ci->i_wrbuffer_ref)
+	if (ci->i_wb_ref || ci->i_wrbuffer_ref)
 		used |= CEPH_CAP_FILE_BUFFER;
 	return used;
 }
@@ -1331,10 +1331,11 @@ static void ceph_flush_snaps(struct ceph_inode_info *ci)
 }
 
 /*
- * Mark caps dirty.  If inode is newly dirty, add to the global dirty
- * list.
+ * Mark caps dirty.  If inode is newly dirty, return the dirty flags.
+ * Caller is then responsible for calling __mark_inode_dirty with the
+ * returned flags value.
  */
-void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
+int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
 {
 	struct ceph_mds_client *mdsc =
 		ceph_sb_to_client(ci->vfs_inode.i_sb)->mdsc;
@@ -1357,7 +1358,7 @@ void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
 		list_add(&ci->i_dirty_item, &mdsc->cap_dirty);
 		spin_unlock(&mdsc->cap_dirty_lock);
 		if (ci->i_flushing_caps == 0) {
-			igrab(inode);
+			ihold(inode);
 			dirty |= I_DIRTY_SYNC;
 		}
 	}
@@ -1365,9 +1366,8 @@ void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
 	if (((was | ci->i_flushing_caps) & CEPH_CAP_FILE_BUFFER) &&
 	    (mask & CEPH_CAP_FILE_BUFFER))
 		dirty |= I_DIRTY_DATASYNC;
-	if (dirty)
-		__mark_inode_dirty(inode, dirty);
 	__cap_delay_requeue(mdsc, ci);
+	return dirty;
 }
 
 /*
@@ -1990,11 +1990,11 @@ static void __take_cap_refs(struct ceph_inode_info *ci, int got)
 	if (got & CEPH_CAP_FILE_WR)
 		ci->i_wr_ref++;
 	if (got & CEPH_CAP_FILE_BUFFER) {
-		if (ci->i_wrbuffer_ref == 0)
-			igrab(&ci->vfs_inode);
-		ci->i_wrbuffer_ref++;
-		dout("__take_cap_refs %p wrbuffer %d -> %d (?)\n",
-		     &ci->vfs_inode, ci->i_wrbuffer_ref-1, ci->i_wrbuffer_ref);
+		if (ci->i_wb_ref == 0)
+			ihold(&ci->vfs_inode);
+		ci->i_wb_ref++;
+		dout("__take_cap_refs %p wb %d -> %d (?)\n",
+		     &ci->vfs_inode, ci->i_wb_ref-1, ci->i_wb_ref);
 	}
 }
 
@@ -2169,12 +2169,12 @@ void ceph_put_cap_refs(struct ceph_inode_info *ci, int had)
 		if (--ci->i_rdcache_ref == 0)
 			last++;
 	if (had & CEPH_CAP_FILE_BUFFER) {
-		if (--ci->i_wrbuffer_ref == 0) {
+		if (--ci->i_wb_ref == 0) {
 			last++;
 			put++;
 		}
-		dout("put_cap_refs %p wrbuffer %d -> %d (?)\n",
-		     inode, ci->i_wrbuffer_ref+1, ci->i_wrbuffer_ref);
+		dout("put_cap_refs %p wb %d -> %d (?)\n",
+		     inode, ci->i_wb_ref+1, ci->i_wb_ref);
 	}
 	if (had & CEPH_CAP_FILE_WR)
 		if (--ci->i_wr_ref == 0) {
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 159b512d5a2..203252d88d9 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -734,9 +734,12 @@ retry_snap:
 		}
 	}
 	if (ret >= 0) {
+		int dirty;
 		spin_lock(&inode->i_lock);
-		__ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
+		dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
 		spin_unlock(&inode->i_lock);
+		if (dirty)
+			__mark_inode_dirty(inode, dirty);
 	}
 
 out:
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index b54c97da1c4..70b6a4839c3 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -355,6 +355,7 @@ struct inode *ceph_alloc_inode(struct super_block *sb)
 	ci->i_rd_ref = 0;
 	ci->i_rdcache_ref = 0;
 	ci->i_wr_ref = 0;
+	ci->i_wb_ref = 0;
 	ci->i_wrbuffer_ref = 0;
 	ci->i_wrbuffer_ref_head = 0;
 	ci->i_shared_gen = 0;
@@ -1567,6 +1568,7 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr)
 	int release = 0, dirtied = 0;
 	int mask = 0;
 	int err = 0;
+	int inode_dirty_flags = 0;
 
 	if (ceph_snap(inode) != CEPH_NOSNAP)
 		return -EROFS;
@@ -1725,13 +1727,16 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr)
 		dout("setattr %p ATTR_FILE ... hrm!\n", inode);
 
 	if (dirtied) {
-		__ceph_mark_dirty_caps(ci, dirtied);
+		inode_dirty_flags = __ceph_mark_dirty_caps(ci, dirtied);
 		inode->i_ctime = CURRENT_TIME;
 	}
 
 	release &= issued;
 	spin_unlock(&inode->i_lock);
 
+	if (inode_dirty_flags)
+		__mark_inode_dirty(inode, inode_dirty_flags);
+
 	if (mask) {
 		req->r_inode = igrab(inode);
 		req->r_inode_drop = release;
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index a1ee8fa3a8e..d0fae4ce9ba 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -3215,9 +3215,15 @@ void ceph_mdsc_destroy(struct ceph_fs_client *fsc)
 {
 	struct ceph_mds_client *mdsc = fsc->mdsc;
 
+	dout("mdsc_destroy %p\n", mdsc);
 	ceph_mdsc_stop(mdsc);
+
+	/* flush out any connection work with references to us */
+	ceph_msgr_flush();
+
 	fsc->mdsc = NULL;
 	kfree(mdsc);
+	dout("mdsc_destroy %p done\n", mdsc);
 }
 
 
@@ -3298,8 +3304,8 @@ static void con_put(struct ceph_connection *con)
 {
 	struct ceph_mds_session *s = con->private;
 
+	dout("mdsc con_put %p (%d)\n", s, atomic_read(&s->s_ref) - 1);
 	ceph_put_mds_session(s);
-	dout("mdsc con_put %p (%d)\n", s, atomic_read(&s->s_ref));
 }
 
 /*
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 0aee66b92af..24067d68a55 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -206,7 +206,7 @@ void ceph_put_snap_realm(struct ceph_mds_client *mdsc,
 		up_write(&mdsc->snap_rwsem);
 	} else {
 		spin_lock(&mdsc->snap_empty_lock);
-		list_add(&mdsc->snap_empty, &realm->empty_item);
+		list_add(&realm->empty_item, &mdsc->snap_empty);
 		spin_unlock(&mdsc->snap_empty_lock);
 	}
 }
@@ -342,7 +342,7 @@ static int build_snap_context(struct ceph_snap_realm *realm)
 	num = 0;
 	snapc->seq = realm->seq;
 	if (parent) {
-		/* include any of parent's snaps occuring _after_ my
+		/* include any of parent's snaps occurring _after_ my
 		   parent became my parent */
 		for (i = 0; i < parent->cached_context->num_snaps; i++)
 			if (parent->cached_context->snaps[i] >=
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index a9e78b4a258..f2f77fd3c14 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -353,7 +353,7 @@ static int ceph_show_options(struct seq_file *m, struct vfsmount *mnt)
 
 	if (opt->name)
 		seq_printf(m, ",name=%s", opt->name);
-	if (opt->secret)
+	if (opt->key)
 		seq_puts(m, ",secret=<hidden>");
 
 	if (opt->mount_timeout != CEPH_MOUNT_TIMEOUT_DEFAULT)
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 619fe719968..f5cabefa98d 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -293,7 +293,7 @@ struct ceph_inode_info {
 
 	/* held references to caps */
 	int i_pin_ref;
-	int i_rd_ref, i_rdcache_ref, i_wr_ref;
+	int i_rd_ref, i_rdcache_ref, i_wr_ref, i_wb_ref;
 	int i_wrbuffer_ref, i_wrbuffer_ref_head;
 	u32 i_shared_gen;       /* increment each time we get FILE_SHARED */
 	u32 i_rdcache_gen;      /* incremented each time we get FILE_CACHE. */
@@ -506,7 +506,7 @@ static inline int __ceph_caps_dirty(struct ceph_inode_info *ci)
 {
 	return ci->i_dirty_caps | ci->i_flushing_caps;
 }
-extern void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask);
+extern int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask);
 
 extern int ceph_caps_revoking(struct ceph_inode_info *ci, int mask);
 extern int __ceph_caps_used(struct ceph_inode_info *ci);
diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
index 8c9eba6ef9d..f2b62869618 100644
--- a/fs/ceph/xattr.c
+++ b/fs/ceph/xattr.c
@@ -703,6 +703,7 @@ int ceph_setxattr(struct dentry *dentry, const char *name,
 	struct ceph_inode_xattr *xattr = NULL;
 	int issued;
 	int required_blob_size;
+	int dirty;
 
 	if (ceph_snap(inode) != CEPH_NOSNAP)
 		return -EROFS;
@@ -763,11 +764,12 @@ retry:
 	dout("setxattr %p issued %s\n", inode, ceph_cap_string(issued));
 	err = __set_xattr(ci, newname, name_len, newval,
 			  val_len, 1, 1, 1, &xattr);
-	__ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+	dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
 	ci->i_xattrs.dirty = true;
 	inode->i_ctime = CURRENT_TIME;
 	spin_unlock(&inode->i_lock);
-
+	if (dirty)
+		__mark_inode_dirty(inode, dirty);
 	return err;
 
 do_sync:
@@ -810,6 +812,7 @@ int ceph_removexattr(struct dentry *dentry, const char *name)
 	struct ceph_vxattr_cb *vxattrs = ceph_inode_vxattrs(inode);
 	int issued;
 	int err;
+	int dirty;
 
 	if (ceph_snap(inode) != CEPH_NOSNAP)
 		return -EROFS;
@@ -833,12 +836,13 @@ int ceph_removexattr(struct dentry *dentry, const char *name)
 		goto do_sync;
 
 	err = __remove_xattr_by_name(ceph_inode(inode), name);
-	__ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+	dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
 	ci->i_xattrs.dirty = true;
 	inode->i_ctime = CURRENT_TIME;
 
 	spin_unlock(&inode->i_lock);
-
+	if (dirty)
+		__mark_inode_dirty(inode, dirty);
 	return err;
 do_sync:
 	spin_unlock(&inode->i_lock);
diff --git a/fs/cifs/AUTHORS b/fs/cifs/AUTHORS
index 7f7fa3c302a..ea940b1db77 100644
--- a/fs/cifs/AUTHORS
+++ b/fs/cifs/AUTHORS
@@ -35,7 +35,7 @@ Adrian Bunk (kcalloc cleanups)
 Miklos Szeredi 
 Kazeon team for various fixes especially for 2.4 version.
 Asser Ferno (Change Notify support)
-Shaggy (Dave Kleikamp) for inumerable small fs suggestions and some good cleanup
+Shaggy (Dave Kleikamp) for innumerable small fs suggestions and some good cleanup
 Gunter Kukkukk (testing and suggestions for support of old servers)
 Igor Mammedov (DFS support)
 Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code)
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 7cb0f7f847e..75c47cd8d08 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -7,6 +7,7 @@ config CIFS
 	select CRYPTO_MD5
 	select CRYPTO_HMAC
 	select CRYPTO_ARC4
+	select CRYPTO_DES
 	help
 	  This is the client VFS module for the Common Internet File System
 	  (CIFS) protocol which is the successor to the Server Message Block
@@ -152,16 +153,28 @@ config CIFS_ACL
 	    Allows to fetch CIFS/NTFS ACL from the server.  The DACL blob
 	    is handed over to the application/caller.
 
-config CIFS_EXPERIMENTAL
-	  bool "CIFS Experimental Features (EXPERIMENTAL)"
+config CIFS_SMB2
+	bool "SMB2 network file system support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && INET && BROKEN
+	select NLS
+	select KEYS
+	select FSCACHE
+	select DNS_RESOLVER
+
+	help
+	  This enables experimental support for the SMB2 (Server Message Block
+	  version 2) protocol. The SMB2 protocol is the successor to the
+	  popular CIFS and SMB network file sharing protocols. SMB2 is the
+	  native file sharing mechanism for recent versions of Windows
+	  operating systems (since Vista).  SMB2 enablement will eventually
+	  allow users better performance, security and features, than would be
+	  possible with cifs. Note that smb2 mount options also are simpler
+	  (compared to cifs) due to protocol improvements.
+
+	  Unless you are a developer or tester, say N.
+
+config CIFS_NFSD_EXPORT
+	  bool "Allow nfsd to export CIFS file system (EXPERIMENTAL)"
 	  depends on CIFS && EXPERIMENTAL
 	  help
-	    Enables cifs features under testing. These features are
-	    experimental and currently include DFS support and directory
-	    change notification ie fcntl(F_DNOTIFY), as well as the upcall
-	    mechanism which will be used for Kerberos session negotiation
-	    and uid remapping.  Some of these features also may depend on
-	    setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
-	    (which is disabled by default). See the file fs/cifs/README
-	    for more details.  If unsure, say N.
-
+	   Allows NFS server to export a CIFS mounted share (nfsd over cifs)
diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile
index d87558448e3..005d524c3a4 100644
--- a/fs/cifs/Makefile
+++ b/fs/cifs/Makefile
@@ -4,7 +4,7 @@
 obj-$(CONFIG_CIFS) += cifs.o
 
 cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \
-	  link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \
+	  link.o misc.o netmisc.o smbencrypt.o transport.o asn1.o \
 	  cifs_unicode.o nterr.o xattr.o cifsencrypt.o \
 	  readdir.o ioctl.o sess.o export.o
 
diff --git a/fs/cifs/README b/fs/cifs/README
index fe168359082..4a3ca0e5ca2 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -685,22 +685,6 @@ LinuxExtensionsEnabled	If set to one then the client will attempt to
 			support and want to map the uid and gid fields 
 			to values supplied at mount (rather than the 
 			actual values, then set this to zero. (default 1)
-Experimental            When set to 1 used to enable certain experimental
-			features (currently enables multipage writes
-			when signing is enabled, the multipage write
-			performance enhancement was disabled when
-			signing turned on in case buffer was modified
-			just before it was sent, also this flag will
-			be used to use the new experimental directory change 
-			notification code).  When set to 2 enables
-			an additional experimental feature, "raw ntlmssp"
-			session establishment support (which allows
-			specifying "sec=ntlmssp" on mount). The Linux cifs
-			module will use ntlmv2 authentication encapsulated
-			in "raw ntlmssp" (not using SPNEGO) when
-			"sec=ntlmssp" is specified on mount.
-			This support also requires building cifs with
-			the CONFIG_CIFS_EXPERIMENTAL configuration flag.
 
 These experimental features and tracing can be enabled by changing flags in 
 /proc/fs/cifs (after the cifs module has been installed or built into the 
@@ -720,18 +704,6 @@ the start of smb requests and responses can be enabled via:
 
 	echo 1 > /proc/fs/cifs/traceSMB
 
-Two other experimental features are under development. To test these
-requires enabling CONFIG_CIFS_EXPERIMENTAL
-
-	cifsacl support needed to retrieve approximated mode bits based on
-		the contents on the CIFS ACL.
-
-	lease support: cifs will check the oplock state before calling into
-	the vfs to see if we can grant a lease on a file.
-
-	DNOTIFY fcntl: needed for support of directory change 
-			    notification and perhaps later for file leases)
-
 Per share (per client mount) statistics are available in /proc/fs/cifs/Stats
 if the kernel was configured with cifs statistics enabled.  The statistics
 represent the number of successful (ie non-zero return code from the server) 
diff --git a/fs/cifs/cache.c b/fs/cifs/cache.c
index e654dfd092c..53d57a3fe42 100644
--- a/fs/cifs/cache.c
+++ b/fs/cifs/cache.c
@@ -50,7 +50,7 @@ void cifs_fscache_unregister(void)
  */
 struct cifs_server_key {
 	uint16_t	family;		/* address family */
-	uint16_t	port;		/* IP port */
+	__be16		port;		/* IP port */
 	union {
 		struct in_addr	ipv4_addr;
 		struct in6_addr	ipv6_addr;
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 65829d32128..18f4272d904 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -63,7 +63,7 @@ void cifs_dump_detail(struct smb_hdr *smb)
 	cERROR(1, "Cmd: %d Err: 0x%x Flags: 0x%x Flgs2: 0x%x Mid: %d Pid: %d",
 		  smb->Command, smb->Status.CifsError,
 		  smb->Flags, smb->Flags2, smb->Mid, smb->Pid);
-	cERROR(1, "smb buf %p len %d", smb, smbCalcSize_LE(smb));
+	cERROR(1, "smb buf %p len %d", smb, smbCalcSize(smb));
 }
 
 
@@ -423,7 +423,6 @@ static const struct file_operations cifs_lookup_cache_proc_fops;
 static const struct file_operations traceSMB_proc_fops;
 static const struct file_operations cifs_multiuser_mount_proc_fops;
 static const struct file_operations cifs_security_flags_proc_fops;
-static const struct file_operations cifs_experimental_proc_fops;
 static const struct file_operations cifs_linux_ext_proc_fops;
 
 void
@@ -441,8 +440,6 @@ cifs_proc_init(void)
 	proc_create("cifsFYI", 0, proc_fs_cifs, &cifsFYI_proc_fops);
 	proc_create("traceSMB", 0, proc_fs_cifs, &traceSMB_proc_fops);
 	proc_create("OplockEnabled", 0, proc_fs_cifs, &cifs_oplock_proc_fops);
-	proc_create("Experimental", 0, proc_fs_cifs,
-		    &cifs_experimental_proc_fops);
 	proc_create("LinuxExtensionsEnabled", 0, proc_fs_cifs,
 		    &cifs_linux_ext_proc_fops);
 	proc_create("MultiuserMount", 0, proc_fs_cifs,
@@ -469,7 +466,6 @@ cifs_proc_clean(void)
 	remove_proc_entry("OplockEnabled", proc_fs_cifs);
 	remove_proc_entry("SecurityFlags", proc_fs_cifs);
 	remove_proc_entry("LinuxExtensionsEnabled", proc_fs_cifs);
-	remove_proc_entry("Experimental", proc_fs_cifs);
 	remove_proc_entry("LookupCacheEnabled", proc_fs_cifs);
 	remove_proc_entry("fs/cifs", NULL);
 }
@@ -550,45 +546,6 @@ static const struct file_operations cifs_oplock_proc_fops = {
 	.write		= cifs_oplock_proc_write,
 };
 
-static int cifs_experimental_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%d\n", experimEnabled);
-	return 0;
-}
-
-static int cifs_experimental_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, cifs_experimental_proc_show, NULL);
-}
-
-static ssize_t cifs_experimental_proc_write(struct file *file,
-		const char __user *buffer, size_t count, loff_t *ppos)
-{
-	char c;
-	int rc;
-
-	rc = get_user(c, buffer);
-	if (rc)
-		return rc;
-	if (c == '0' || c == 'n' || c == 'N')
-		experimEnabled = 0;
-	else if (c == '1' || c == 'y' || c == 'Y')
-		experimEnabled = 1;
-	else if (c == '2')
-		experimEnabled = 2;
-
-	return count;
-}
-
-static const struct file_operations cifs_experimental_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= cifs_experimental_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= cifs_experimental_proc_write,
-};
-
 static int cifs_linux_ext_proc_show(struct seq_file *m, void *v)
 {
 	seq_printf(m, "%d\n", linuxExtEnabled);
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 0a265ad9e42..2b68ac57d97 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -53,7 +53,7 @@ void cifs_dfs_release_automount_timer(void)
  *
  * Extracts sharename form full UNC.
  * i.e. strips from UNC trailing path that is not part of share
- * name and fixup missing '\' in the begining of DFS node refferal
+ * name and fixup missing '\' in the beginning of DFS node refferal
  * if necessary.
  * Returns pointer to share name on success or ERR_PTR on error.
  * Caller is responsible for freeing returned string.
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index ac51cd2d33a..a9d5692e0c2 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -58,9 +58,7 @@ struct cifs_sb_info {
 	unsigned int mnt_cifs_flags;
 	int	prepathlen;
 	char   *prepath; /* relative path under the share to mount to */
-#ifdef CONFIG_CIFS_DFS_UPCALL
-	char   *mountdata; /* mount options received at mount time */
-#endif
+	char   *mountdata; /* options received at mount time or via DFS refs */
 	struct backing_dev_info bdi;
 	struct delayed_work prune_tlinks;
 };
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 4dfba828316..33d221394ac 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -113,7 +113,7 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 		   MAX_MECH_STR_LEN +
 		   UID_KEY_LEN + (sizeof(uid_t) * 2) +
 		   CREDUID_KEY_LEN + (sizeof(uid_t) * 2) +
-		   USER_KEY_LEN + strlen(sesInfo->userName) +
+		   USER_KEY_LEN + strlen(sesInfo->user_name) +
 		   PID_KEY_LEN + (sizeof(pid_t) * 2) + 1;
 
 	spnego_key = ERR_PTR(-ENOMEM);
@@ -153,7 +153,7 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 	sprintf(dp, ";creduid=0x%x", sesInfo->cred_uid);
 
 	dp = description + strlen(description);
-	sprintf(dp, ";user=%s", sesInfo->userName);
+	sprintf(dp, ";user=%s", sesInfo->user_name);
 
 	dp = description + strlen(description);
 	sprintf(dp, ";pid=0x%x", current->pid);
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index fc0fd4fde30..1b2e180b018 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -90,7 +90,7 @@ cifs_mapchar(char *target, const __u16 src_char, const struct nls_table *cp,
 	case UNI_COLON:
 		*target = ':';
 		break;
-	case UNI_ASTERIK:
+	case UNI_ASTERISK:
 		*target = '*';
 		break;
 	case UNI_QUESTION:
@@ -264,40 +264,41 @@ cifs_strndup_from_ucs(const char *src, const int maxlen, const bool is_unicode,
  * names are little endian 16 bit Unicode on the wire
  */
 int
-cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
+cifsConvertToUCS(__le16 *target, const char *source, int srclen,
 		 const struct nls_table *cp, int mapChars)
 {
 	int i, j, charlen;
-	int len_remaining = maxlen;
 	char src_char;
-	__u16 temp;
+	__le16 dst_char;
+	wchar_t tmp;
 
 	if (!mapChars)
 		return cifs_strtoUCS(target, source, PATH_MAX, cp);
 
-	for (i = 0, j = 0; i < maxlen; j++) {
+	for (i = 0, j = 0; i < srclen; j++) {
 		src_char = source[i];
+		charlen = 1;
 		switch (src_char) {
 		case 0:
-			put_unaligned_le16(0, &target[j]);
+			put_unaligned(0, &target[j]);
 			goto ctoUCS_out;
 		case ':':
-			temp = UNI_COLON;
+			dst_char = cpu_to_le16(UNI_COLON);
 			break;
 		case '*':
-			temp = UNI_ASTERIK;
+			dst_char = cpu_to_le16(UNI_ASTERISK);
 			break;
 		case '?':
-			temp = UNI_QUESTION;
+			dst_char = cpu_to_le16(UNI_QUESTION);
 			break;
 		case '<':
-			temp = UNI_LESSTHAN;
+			dst_char = cpu_to_le16(UNI_LESSTHAN);
 			break;
 		case '>':
-			temp = UNI_GRTRTHAN;
+			dst_char = cpu_to_le16(UNI_GRTRTHAN);
 			break;
 		case '|':
-			temp = UNI_PIPE;
+			dst_char = cpu_to_le16(UNI_PIPE);
 			break;
 		/*
 		 * FIXME: We can not handle remapping backslash (UNI_SLASH)
@@ -305,28 +306,24 @@ cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
 		 * as they use backslash as separator.
 		 */
 		default:
-			charlen = cp->char2uni(source+i, len_remaining,
-						&temp);
+			charlen = cp->char2uni(source + i, srclen - i, &tmp);
+			dst_char = cpu_to_le16(tmp);
+
 			/*
 			 * if no match, use question mark, which at least in
 			 * some cases serves as wild card
 			 */
 			if (charlen < 1) {
-				temp = 0x003f;
+				dst_char = cpu_to_le16(0x003f);
 				charlen = 1;
 			}
-			len_remaining -= charlen;
-			/*
-			 * character may take more than one byte in the source
-			 * string, but will take exactly two bytes in the
-			 * target string
-			 */
-			i += charlen;
-			continue;
 		}
-		put_unaligned_le16(temp, &target[j]);
-		i++; /* move to next char in source string */
-		len_remaining--;
+		/*
+		 * character may take more than one byte in the source string,
+		 * but will take exactly two bytes in the target string
+		 */
+		i += charlen;
+		put_unaligned(dst_char, &target[j]);
 	}
 
 ctoUCS_out:
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 7fe6b52df50..6d02fd56056 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -44,7 +44,7 @@
  * reserved symbols (along with \ and /), otherwise illegal to store
  * in filenames in NTFS
  */
-#define UNI_ASTERIK     (__u16) ('*' + 0xF000)
+#define UNI_ASTERISK    (__u16) ('*' + 0xF000)
 #define UNI_QUESTION    (__u16) ('?' + 0xF000)
 #define UNI_COLON       (__u16) (':' + 0xF000)
 #define UNI_GRTRTHAN    (__u16) ('>' + 0xF000)
@@ -82,6 +82,9 @@ int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
 char *cifs_strndup_from_ucs(const char *src, const int maxlen,
 			    const bool is_unicode,
 			    const struct nls_table *codepage);
+extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
+			const struct nls_table *cp, int mapChars);
+
 #endif
 
 /*
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index beeebf19423..f3c6fb9942a 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -23,24 +23,16 @@
 
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/keyctl.h>
+#include <linux/key-type.h>
+#include <keys/user-type.h>
 #include "cifspdu.h"
 #include "cifsglob.h"
 #include "cifsacl.h"
 #include "cifsproto.h"
 #include "cifs_debug.h"
 
-
-static struct cifs_wksid wksidarr[NUM_WK_SIDS] = {
-	{{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"},
-	{{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"},
-	{{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(11), 0, 0, 0, 0} }, "net-users"},
-	{{1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(18), 0, 0, 0, 0} }, "sys"},
-	{{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(544), 0, 0, 0} }, "root"},
-	{{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(545), 0, 0, 0} }, "users"},
-	{{1, 2, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(32), __constant_cpu_to_le32(546), 0, 0, 0} }, "guest"} }
-;
-
-
 /* security id for everyone/world system group */
 static const struct cifs_sid sid_everyone = {
 	1, 1, {0, 0, 0, 0, 0, 1}, {0} };
@@ -50,50 +42,385 @@ static const struct cifs_sid sid_authusers = {
 /* group users */
 static const struct cifs_sid sid_user = {1, 2 , {0, 0, 0, 0, 0, 5}, {} };
 
+const struct cred *root_cred;
 
-int match_sid(struct cifs_sid *ctsid)
+static void
+shrink_idmap_tree(struct rb_root *root, int nr_to_scan, int *nr_rem,
+			int *nr_del)
 {
-	int i, j;
-	int num_subauth, num_sat, num_saw;
-	struct cifs_sid *cwsid;
+	struct rb_node *node;
+	struct rb_node *tmp;
+	struct cifs_sid_id *psidid;
+
+	node = rb_first(root);
+	while (node) {
+		tmp = node;
+		node = rb_next(tmp);
+		psidid = rb_entry(tmp, struct cifs_sid_id, rbnode);
+		if (nr_to_scan == 0 || *nr_del == nr_to_scan)
+			++(*nr_rem);
+		else {
+			if (time_after(jiffies, psidid->time + SID_MAP_EXPIRE)
+						&& psidid->refcount == 0) {
+				rb_erase(tmp, root);
+				++(*nr_del);
+			} else
+				++(*nr_rem);
+		}
+	}
+}
+
+/*
+ * Run idmap cache shrinker.
+ */
+static int
+cifs_idmap_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
+{
+	int nr_del = 0;
+	int nr_rem = 0;
+	struct rb_root *root;
+
+	root = &uidtree;
+	spin_lock(&siduidlock);
+	shrink_idmap_tree(root, nr_to_scan, &nr_rem, &nr_del);
+	spin_unlock(&siduidlock);
+
+	root = &gidtree;
+	spin_lock(&sidgidlock);
+	shrink_idmap_tree(root, nr_to_scan, &nr_rem, &nr_del);
+	spin_unlock(&sidgidlock);
+
+	return nr_rem;
+}
+
+static struct shrinker cifs_shrinker = {
+	.shrink = cifs_idmap_shrinker,
+	.seeks = DEFAULT_SEEKS,
+};
+
+static int
+cifs_idmap_key_instantiate(struct key *key, const void *data, size_t datalen)
+{
+	char *payload;
+
+	payload = kmalloc(datalen, GFP_KERNEL);
+	if (!payload)
+		return -ENOMEM;
+
+	memcpy(payload, data, datalen);
+	key->payload.data = payload;
+	return 0;
+}
+
+static inline void
+cifs_idmap_key_destroy(struct key *key)
+{
+	kfree(key->payload.data);
+}
 
-	if (!ctsid)
-		return -1;
+struct key_type cifs_idmap_key_type = {
+	.name        = "cifs.idmap",
+	.instantiate = cifs_idmap_key_instantiate,
+	.destroy     = cifs_idmap_key_destroy,
+	.describe    = user_describe,
+	.match       = user_match,
+};
+
+static void
+sid_to_str(struct cifs_sid *sidptr, char *sidstr)
+{
+	int i;
+	unsigned long saval;
+	char *strptr;
 
-	for (i = 0; i < NUM_WK_SIDS; ++i) {
-		cwsid = &(wksidarr[i].cifssid);
+	strptr = sidstr;
 
-		/* compare the revision */
-		if (ctsid->revision != cwsid->revision)
-			continue;
+	sprintf(strptr, "%s", "S");
+	strptr = sidstr + strlen(sidstr);
 
-		/* compare all of the six auth values */
-		for (j = 0; j < 6; ++j) {
-			if (ctsid->authority[j] != cwsid->authority[j])
-				break;
+	sprintf(strptr, "-%d", sidptr->revision);
+	strptr = sidstr + strlen(sidstr);
+
+	for (i = 0; i < 6; ++i) {
+		if (sidptr->authority[i]) {
+			sprintf(strptr, "-%d", sidptr->authority[i]);
+			strptr = sidstr + strlen(sidstr);
 		}
-		if (j < 6)
-			continue; /* all of the auth values did not match */
-
-		/* compare all of the subauth values if any */
-		num_sat = ctsid->num_subauth;
-		num_saw = cwsid->num_subauth;
-		num_subauth = num_sat < num_saw ? num_sat : num_saw;
-		if (num_subauth) {
-			for (j = 0; j < num_subauth; ++j) {
-				if (ctsid->sub_auth[j] != cwsid->sub_auth[j])
-					break;
-			}
-			if (j < num_subauth)
-				continue; /* all sub_auth values do not match */
+	}
+
+	for (i = 0; i < sidptr->num_subauth; ++i) {
+		saval = le32_to_cpu(sidptr->sub_auth[i]);
+		sprintf(strptr, "-%ld", saval);
+		strptr = sidstr + strlen(sidstr);
+	}
+}
+
+static void
+id_rb_insert(struct rb_root *root, struct cifs_sid *sidptr,
+		struct cifs_sid_id **psidid, char *typestr)
+{
+	int rc;
+	char *strptr;
+	struct rb_node *node = root->rb_node;
+	struct rb_node *parent = NULL;
+	struct rb_node **linkto = &(root->rb_node);
+	struct cifs_sid_id *lsidid;
+
+	while (node) {
+		lsidid = rb_entry(node, struct cifs_sid_id, rbnode);
+		parent = node;
+		rc = compare_sids(sidptr, &((lsidid)->sid));
+		if (rc > 0) {
+			linkto = &(node->rb_left);
+			node = node->rb_left;
+		} else if (rc < 0) {
+			linkto = &(node->rb_right);
+			node = node->rb_right;
+		}
+	}
+
+	memcpy(&(*psidid)->sid, sidptr, sizeof(struct cifs_sid));
+	(*psidid)->time = jiffies - (SID_MAP_RETRY + 1);
+	(*psidid)->refcount = 0;
+
+	sprintf((*psidid)->sidstr, "%s", typestr);
+	strptr = (*psidid)->sidstr + strlen((*psidid)->sidstr);
+	sid_to_str(&(*psidid)->sid, strptr);
+
+	clear_bit(SID_ID_PENDING, &(*psidid)->state);
+	clear_bit(SID_ID_MAPPED, &(*psidid)->state);
+
+	rb_link_node(&(*psidid)->rbnode, parent, linkto);
+	rb_insert_color(&(*psidid)->rbnode, root);
+}
+
+static struct cifs_sid_id *
+id_rb_search(struct rb_root *root, struct cifs_sid *sidptr)
+{
+	int rc;
+	struct rb_node *node = root->rb_node;
+	struct cifs_sid_id *lsidid;
+
+	while (node) {
+		lsidid = rb_entry(node, struct cifs_sid_id, rbnode);
+		rc = compare_sids(sidptr, &((lsidid)->sid));
+		if (rc > 0) {
+			node = node->rb_left;
+		} else if (rc < 0) {
+			node = node->rb_right;
+		} else /* node found */
+			return lsidid;
+	}
+
+	return NULL;
+}
+
+static int
+sidid_pending_wait(void *unused)
+{
+	schedule();
+	return signal_pending(current) ? -ERESTARTSYS : 0;
+}
+
+static int
+sid_to_id(struct cifs_sb_info *cifs_sb, struct cifs_sid *psid,
+		struct cifs_fattr *fattr, uint sidtype)
+{
+	int rc;
+	unsigned long cid;
+	struct key *idkey;
+	const struct cred *saved_cred;
+	struct cifs_sid_id *psidid, *npsidid;
+	struct rb_root *cidtree;
+	spinlock_t *cidlock;
+
+	if (sidtype == SIDOWNER) {
+		cid = cifs_sb->mnt_uid; /* default uid, in case upcall fails */
+		cidlock = &siduidlock;
+		cidtree = &uidtree;
+	} else if (sidtype == SIDGROUP) {
+		cid = cifs_sb->mnt_gid; /* default gid, in case upcall fails */
+		cidlock = &sidgidlock;
+		cidtree = &gidtree;
+	} else
+		return -ENOENT;
+
+	spin_lock(cidlock);
+	psidid = id_rb_search(cidtree, psid);
+
+	if (!psidid) { /* node does not exist, allocate one & attempt adding */
+		spin_unlock(cidlock);
+		npsidid = kzalloc(sizeof(struct cifs_sid_id), GFP_KERNEL);
+		if (!npsidid)
+			return -ENOMEM;
+
+		npsidid->sidstr = kmalloc(SIDLEN, GFP_KERNEL);
+		if (!npsidid->sidstr) {
+			kfree(npsidid);
+			return -ENOMEM;
+		}
+
+		spin_lock(cidlock);
+		psidid = id_rb_search(cidtree, psid);
+		if (psidid) { /* node happened to get inserted meanwhile */
+			++psidid->refcount;
+			spin_unlock(cidlock);
+			kfree(npsidid->sidstr);
+			kfree(npsidid);
+		} else {
+			psidid = npsidid;
+			id_rb_insert(cidtree, psid, &psidid,
+					sidtype == SIDOWNER ? "os:" : "gs:");
+			++psidid->refcount;
+			spin_unlock(cidlock);
 		}
+	} else {
+		++psidid->refcount;
+		spin_unlock(cidlock);
+	}
+
+	/*
+	 * If we are here, it is safe to access psidid and its fields
+	 * since a reference was taken earlier while holding the spinlock.
+	 * A reference on the node is put without holding the spinlock
+	 * and it is OK to do so in this case, shrinker will not erase
+	 * this node until all references are put and we do not access
+	 * any fields of the node after a reference is put .
+	 */
+	if (test_bit(SID_ID_MAPPED, &psidid->state)) {
+		cid = psidid->id;
+		psidid->time = jiffies; /* update ts for accessing */
+		goto sid_to_id_out;
+	}
 
-		cFYI(1, "matching sid: %s\n", wksidarr[i].sidname);
-		return 0; /* sids compare/match */
+	if (time_after(psidid->time + SID_MAP_RETRY, jiffies))
+		goto sid_to_id_out;
+
+	if (!test_and_set_bit(SID_ID_PENDING, &psidid->state)) {
+		saved_cred = override_creds(root_cred);
+		idkey = request_key(&cifs_idmap_key_type, psidid->sidstr, "");
+		if (IS_ERR(idkey))
+			cFYI(1, "%s: Can't map SID to an id", __func__);
+		else {
+			cid = *(unsigned long *)idkey->payload.value;
+			psidid->id = cid;
+			set_bit(SID_ID_MAPPED, &psidid->state);
+			key_put(idkey);
+			kfree(psidid->sidstr);
+		}
+		revert_creds(saved_cred);
+		psidid->time = jiffies; /* update ts for accessing */
+		clear_bit(SID_ID_PENDING, &psidid->state);
+		wake_up_bit(&psidid->state, SID_ID_PENDING);
+	} else {
+		rc = wait_on_bit(&psidid->state, SID_ID_PENDING,
+				sidid_pending_wait, TASK_INTERRUPTIBLE);
+		if (rc) {
+			cFYI(1, "%s: sidid_pending_wait interrupted %d",
+					__func__, rc);
+			--psidid->refcount; /* decremented without spinlock */
+			return rc;
+		}
+		if (test_bit(SID_ID_MAPPED, &psidid->state))
+			cid = psidid->id;
 	}
 
-	cFYI(1, "No matching sid");
-	return -1;
+sid_to_id_out:
+	--psidid->refcount; /* decremented without spinlock */
+	if (sidtype == SIDOWNER)
+		fattr->cf_uid = cid;
+	else
+		fattr->cf_gid = cid;
+
+	return 0;
+}
+
+int
+init_cifs_idmap(void)
+{
+	struct cred *cred;
+	struct key *keyring;
+	int ret;
+
+	cFYI(1, "Registering the %s key type\n", cifs_idmap_key_type.name);
+
+	/* create an override credential set with a special thread keyring in
+	 * which requests are cached
+	 *
+	 * this is used to prevent malicious redirections from being installed
+	 * with add_key().
+	 */
+	cred = prepare_kernel_cred(NULL);
+	if (!cred)
+		return -ENOMEM;
+
+	keyring = key_alloc(&key_type_keyring, ".cifs_idmap", 0, 0, cred,
+			    (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+			    KEY_USR_VIEW | KEY_USR_READ,
+			    KEY_ALLOC_NOT_IN_QUOTA);
+	if (IS_ERR(keyring)) {
+		ret = PTR_ERR(keyring);
+		goto failed_put_cred;
+	}
+
+	ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
+	if (ret < 0)
+		goto failed_put_key;
+
+	ret = register_key_type(&cifs_idmap_key_type);
+	if (ret < 0)
+		goto failed_put_key;
+
+	/* instruct request_key() to use this special keyring as a cache for
+	 * the results it looks up */
+	cred->thread_keyring = keyring;
+	cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+	root_cred = cred;
+
+	spin_lock_init(&siduidlock);
+	uidtree = RB_ROOT;
+	spin_lock_init(&sidgidlock);
+	gidtree = RB_ROOT;
+
+	register_shrinker(&cifs_shrinker);
+
+	cFYI(1, "cifs idmap keyring: %d\n", key_serial(keyring));
+	return 0;
+
+failed_put_key:
+	key_put(keyring);
+failed_put_cred:
+	put_cred(cred);
+	return ret;
+}
+
+void
+exit_cifs_idmap(void)
+{
+	key_revoke(root_cred->thread_keyring);
+	unregister_key_type(&cifs_idmap_key_type);
+	put_cred(root_cred);
+	unregister_shrinker(&cifs_shrinker);
+	cFYI(1, "Unregistered %s key type\n", cifs_idmap_key_type.name);
+}
+
+void
+cifs_destroy_idmaptrees(void)
+{
+	struct rb_root *root;
+	struct rb_node *node;
+
+	root = &uidtree;
+	spin_lock(&siduidlock);
+	while ((node = rb_first(root)))
+		rb_erase(node, root);
+	spin_unlock(&siduidlock);
+
+	root = &gidtree;
+	spin_lock(&sidgidlock);
+	while ((node = rb_first(root)))
+		rb_erase(node, root);
+	spin_unlock(&sidgidlock);
 }
 
 /* if the two SIDs (roughly equivalent to a UUID for a user or group) are
@@ -104,16 +431,24 @@ int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid)
 	int num_subauth, num_sat, num_saw;
 
 	if ((!ctsid) || (!cwsid))
-		return 0;
+		return 1;
 
 	/* compare the revision */
-	if (ctsid->revision != cwsid->revision)
-		return 0;
+	if (ctsid->revision != cwsid->revision) {
+		if (ctsid->revision > cwsid->revision)
+			return 1;
+		else
+			return -1;
+	}
 
 	/* compare all of the six auth values */
 	for (i = 0; i < 6; ++i) {
-		if (ctsid->authority[i] != cwsid->authority[i])
-			return 0;
+		if (ctsid->authority[i] != cwsid->authority[i]) {
+			if (ctsid->authority[i] > cwsid->authority[i])
+				return 1;
+			else
+				return -1;
+		}
 	}
 
 	/* compare all of the subauth values if any */
@@ -122,12 +457,16 @@ int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid)
 	num_subauth = num_sat < num_saw ? num_sat : num_saw;
 	if (num_subauth) {
 		for (i = 0; i < num_subauth; ++i) {
-			if (ctsid->sub_auth[i] != cwsid->sub_auth[i])
-				return 0;
+			if (ctsid->sub_auth[i] != cwsid->sub_auth[i]) {
+				if (ctsid->sub_auth[i] > cwsid->sub_auth[i])
+					return 1;
+				else
+					return -1;
+			}
 		}
 	}
 
-	return 1; /* sids compare/match */
+	return 0; /* sids compare/match */
 }
 
 
@@ -382,22 +721,22 @@ static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
 #ifdef CONFIG_CIFS_DEBUG2
 			dump_ace(ppace[i], end_of_acl);
 #endif
-			if (compare_sids(&(ppace[i]->sid), pownersid))
+			if (compare_sids(&(ppace[i]->sid), pownersid) == 0)
 				access_flags_to_mode(ppace[i]->access_req,
 						     ppace[i]->type,
 						     &fattr->cf_mode,
 						     &user_mask);
-			if (compare_sids(&(ppace[i]->sid), pgrpsid))
+			if (compare_sids(&(ppace[i]->sid), pgrpsid) == 0)
 				access_flags_to_mode(ppace[i]->access_req,
 						     ppace[i]->type,
 						     &fattr->cf_mode,
 						     &group_mask);
-			if (compare_sids(&(ppace[i]->sid), &sid_everyone))
+			if (compare_sids(&(ppace[i]->sid), &sid_everyone) == 0)
 				access_flags_to_mode(ppace[i]->access_req,
 						     ppace[i]->type,
 						     &fattr->cf_mode,
 						     &other_mask);
-			if (compare_sids(&(ppace[i]->sid), &sid_authusers))
+			if (compare_sids(&(ppace[i]->sid), &sid_authusers) == 0)
 				access_flags_to_mode(ppace[i]->access_req,
 						     ppace[i]->type,
 						     &fattr->cf_mode,
@@ -475,10 +814,10 @@ static int parse_sid(struct cifs_sid *psid, char *end_of_acl)
 
 
 /* Convert CIFS ACL to POSIX form */
-static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
-			  struct cifs_fattr *fattr)
+static int parse_sec_desc(struct cifs_sb_info *cifs_sb,
+		struct cifs_ntsd *pntsd, int acl_len, struct cifs_fattr *fattr)
 {
-	int rc;
+	int rc = 0;
 	struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
 	struct cifs_acl *dacl_ptr; /* no need for SACL ptr */
 	char *end_of_acl = ((char *)pntsd) + acl_len;
@@ -500,12 +839,26 @@ static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
 		 le32_to_cpu(pntsd->sacloffset), dacloffset);
 /*	cifs_dump_mem("owner_sid: ", owner_sid_ptr, 64); */
 	rc = parse_sid(owner_sid_ptr, end_of_acl);
-	if (rc)
+	if (rc) {
+		cFYI(1, "%s: Error %d parsing Owner SID", __func__, rc);
+		return rc;
+	}
+	rc = sid_to_id(cifs_sb, owner_sid_ptr, fattr, SIDOWNER);
+	if (rc) {
+		cFYI(1, "%s: Error %d mapping Owner SID to uid", __func__, rc);
 		return rc;
+	}
 
 	rc = parse_sid(group_sid_ptr, end_of_acl);
-	if (rc)
+	if (rc) {
+		cFYI(1, "%s: Error %d mapping Owner SID to gid", __func__, rc);
 		return rc;
+	}
+	rc = sid_to_id(cifs_sb, group_sid_ptr, fattr, SIDGROUP);
+	if (rc) {
+		cFYI(1, "%s: Error %d mapping Group SID to gid", __func__, rc);
+		return rc;
+	}
 
 	if (dacloffset)
 		parse_dacl(dacl_ptr, end_of_acl, owner_sid_ptr,
@@ -520,7 +873,7 @@ static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
 	memcpy((void *)(&(cifscred->gsid)), (void *)group_sid_ptr,
 			sizeof(struct cifs_sid)); */
 
-	return 0;
+	return rc;
 }
 
 
@@ -688,7 +1041,7 @@ out:
 }
 
 /* Set an ACL on the server */
-static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
+int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 				struct inode *inode, const char *path)
 {
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
@@ -727,7 +1080,7 @@ cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
 		rc = PTR_ERR(pntsd);
 		cERROR(1, "%s: error %d getting sec desc", __func__, rc);
 	} else {
-		rc = parse_sec_desc(pntsd, acllen, fattr);
+		rc = parse_sec_desc(cifs_sb, pntsd, acllen, fattr);
 		kfree(pntsd);
 		if (rc)
 			cERROR(1, "parse sec desc failed rc = %d", rc);
diff --git a/fs/cifs/cifsacl.h b/fs/cifs/cifsacl.h
index c4ae7d03656..5c902c7ce52 100644
--- a/fs/cifs/cifsacl.h
+++ b/fs/cifs/cifsacl.h
@@ -39,6 +39,15 @@
 #define ACCESS_ALLOWED	0
 #define ACCESS_DENIED	1
 
+#define SIDOWNER 1
+#define SIDGROUP 2
+#define SIDLEN 150 /* S- 1 revision- 6 authorities- max 5 sub authorities */
+
+#define SID_ID_MAPPED 0
+#define SID_ID_PENDING 1
+#define SID_MAP_EXPIRE (3600 * HZ) /* map entry expires after one hour */
+#define SID_MAP_RETRY (300 * HZ)   /* wait 5 minutes for next attempt to map */
+
 struct cifs_ntsd {
 	__le16 revision; /* revision level */
 	__le16 type;
@@ -74,7 +83,21 @@ struct cifs_wksid {
 	char sidname[SIDNAMELENGTH];
 } __attribute__((packed));
 
-extern int match_sid(struct cifs_sid *);
+struct cifs_sid_id {
+	unsigned int refcount; /* increment with spinlock, decrement without */
+	unsigned long id;
+	unsigned long time;
+	unsigned long state;
+	char *sidstr;
+	struct rb_node rbnode;
+	struct cifs_sid sid;
+};
+
+#ifdef __KERNEL__
+extern struct key_type cifs_idmap_key_type;
+extern const struct cred *root_cred;
+#endif /* KERNEL */
+
 extern int compare_sids(const struct cifs_sid *, const struct cifs_sid *);
 
 #endif /* _CIFSACL_H */
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index a51585f9852..45c3f78c8f8 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -30,12 +30,13 @@
 #include <linux/ctype.h>
 #include <linux/random.h>
 
-/* Calculate and return the CIFS signature based on the mac key and SMB PDU */
-/* the 16 byte signature must be allocated by the caller  */
-/* Note we only use the 1st eight bytes */
-/* Note that the smb header signature field on input contains the
-	sequence number before this function is called */
-
+/*
+ * Calculate and return the CIFS signature based on the mac key and SMB PDU.
+ * The 16 byte signature must be allocated by the caller. Note we only use the
+ * 1st eight bytes and that the smb header signature field on input contains
+ * the sequence number before this function is called. Also, this function
+ * should be called with the server->srv_mutex held.
+ */
 static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu,
 				struct TCP_Server_Info *server, char *signature)
 {
@@ -59,7 +60,7 @@ static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu,
 		server->session_key.response, server->session_key.len);
 
 	crypto_shash_update(&server->secmech.sdescmd5->shash,
-		cifs_pdu->Protocol, cifs_pdu->smb_buf_length);
+		cifs_pdu->Protocol, be32_to_cpu(cifs_pdu->smb_buf_length));
 
 	rc = crypto_shash_final(&server->secmech.sdescmd5->shash, signature);
 
@@ -209,8 +210,10 @@ int cifs_verify_signature(struct smb_hdr *cifs_pdu,
 					cpu_to_le32(expected_sequence_number);
 	cifs_pdu->Signature.Sequence.Reserved = 0;
 
+	mutex_lock(&server->srv_mutex);
 	rc = cifs_calculate_signature(cifs_pdu, server,
 		what_we_think_sig_should_be);
+	mutex_unlock(&server->srv_mutex);
 
 	if (rc)
 		return rc;
@@ -265,10 +268,11 @@ int setup_ntlm_response(struct cifsSesInfo *ses)
 }
 
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
-void calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt,
+int calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt,
 			char *lnm_session_key)
 {
 	int i;
+	int rc;
 	char password_with_pad[CIFS_ENCPWD_SIZE];
 
 	memset(password_with_pad, 0, CIFS_ENCPWD_SIZE);
@@ -279,7 +283,7 @@ void calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt,
 		memset(lnm_session_key, 0, CIFS_SESS_KEY_SIZE);
 		memcpy(lnm_session_key, password_with_pad,
 			CIFS_ENCPWD_SIZE);
-		return;
+		return 0;
 	}
 
 	/* calculate old style session key */
@@ -296,10 +300,9 @@ void calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt,
 	for (i = 0; i < CIFS_ENCPWD_SIZE; i++)
 		password_with_pad[i] = toupper(password_with_pad[i]);
 
-	SMBencrypt(password_with_pad, cryptkey, lnm_session_key);
+	rc = SMBencrypt(password_with_pad, cryptkey, lnm_session_key);
 
-	/* clear password before we return/free memory */
-	memset(password_with_pad, 0, CIFS_ENCPWD_SIZE);
+	return rc;
 }
 #endif /* CIFS_WEAK_PW_HASH */
 
@@ -469,15 +472,15 @@ static int calc_ntlmv2_hash(struct cifsSesInfo *ses, char *ntlmv2_hash,
 		return rc;
 	}
 
-	/* convert ses->userName to unicode and uppercase */
-	len = strlen(ses->userName);
+	/* convert ses->user_name to unicode and uppercase */
+	len = strlen(ses->user_name);
 	user = kmalloc(2 + (len * 2), GFP_KERNEL);
 	if (user == NULL) {
 		cERROR(1, "calc_ntlmv2_hash: user mem alloc failure\n");
 		rc = -ENOMEM;
 		goto calc_exit_2;
 	}
-	len = cifs_strtoUCS((__le16 *)user, ses->userName, len, nls_cp);
+	len = cifs_strtoUCS((__le16 *)user, ses->user_name, len, nls_cp);
 	UniStrupr(user);
 
 	crypto_shash_update(&ses->server->secmech.sdeschmacmd5->shash,
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index f2970136d17..493b74ca564 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -53,7 +53,6 @@ int cifsFYI = 0;
 int cifsERROR = 1;
 int traceSMB = 0;
 unsigned int oplockEnabled = 1;
-unsigned int experimEnabled = 0;
 unsigned int linuxExtEnabled = 1;
 unsigned int lookupCacheEnabled = 1;
 unsigned int multiuser_mount = 0;
@@ -127,30 +126,24 @@ cifs_read_super(struct super_block *sb, void *data,
 		kfree(cifs_sb);
 		return rc;
 	}
+	cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages;
 
-#ifdef CONFIG_CIFS_DFS_UPCALL
-	/* copy mount params to sb for use in submounts */
-	/* BB: should we move this after the mount so we
-	 * do not have to do the copy on failed mounts?
-	 * BB: May be it is better to do simple copy before
-	 * complex operation (mount), and in case of fail
-	 * just exit instead of doing mount and attempting
-	 * undo it if this copy fails?*/
+	/*
+	 * Copy mount params to sb for use in submounts. Better to do
+	 * the copy here and deal with the error before cleanup gets
+	 * complicated post-mount.
+	 */
 	if (data) {
-		int len = strlen(data);
-		cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
+		cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL);
 		if (cifs_sb->mountdata == NULL) {
 			bdi_destroy(&cifs_sb->bdi);
 			kfree(sb->s_fs_info);
 			sb->s_fs_info = NULL;
 			return -ENOMEM;
 		}
-		strncpy(cifs_sb->mountdata, data, len + 1);
-		cifs_sb->mountdata[len] = '\0';
 	}
-#endif
 
-	rc = cifs_mount(sb, cifs_sb, data, devname);
+	rc = cifs_mount(sb, cifs_sb, devname);
 
 	if (rc) {
 		if (!silent)
@@ -163,7 +156,7 @@ cifs_read_super(struct super_block *sb, void *data,
 	sb->s_bdi = &cifs_sb->bdi;
 	sb->s_blocksize = CIFS_MAX_MSGSIZE;
 	sb->s_blocksize_bits = 14;	/* default 2**14 = CIFS_MAX_MSGSIZE */
-	inode = cifs_root_iget(sb, ROOT_I);
+	inode = cifs_root_iget(sb);
 
 	if (IS_ERR(inode)) {
 		rc = PTR_ERR(inode);
@@ -184,12 +177,12 @@ cifs_read_super(struct super_block *sb, void *data,
 	else
 		sb->s_d_op = &cifs_dentry_ops;
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CIFS_NFSD_EXPORT
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
 		cFYI(1, "export ops supported");
 		sb->s_export_op = &cifs_export_ops;
 	}
-#endif /* EXPERIMENTAL */
+#endif /* CIFS_NFSD_EXPORT */
 
 	return 0;
 
@@ -202,12 +195,10 @@ out_no_root:
 
 out_mount_failed:
 	if (cifs_sb) {
-#ifdef CONFIG_CIFS_DFS_UPCALL
 		if (cifs_sb->mountdata) {
 			kfree(cifs_sb->mountdata);
 			cifs_sb->mountdata = NULL;
 		}
-#endif
 		unload_nls(cifs_sb->local_nls);
 		bdi_destroy(&cifs_sb->bdi);
 		kfree(cifs_sb);
@@ -231,12 +222,10 @@ cifs_put_super(struct super_block *sb)
 	rc = cifs_umount(sb, cifs_sb);
 	if (rc)
 		cERROR(1, "cifs_umount failed with return code %d", rc);
-#ifdef CONFIG_CIFS_DFS_UPCALL
 	if (cifs_sb->mountdata) {
 		kfree(cifs_sb->mountdata);
 		cifs_sb->mountdata = NULL;
 	}
-#endif
 
 	unload_nls(cifs_sb->local_nls);
 	bdi_destroy(&cifs_sb->bdi);
@@ -409,8 +398,8 @@ cifs_show_options(struct seq_file *s, struct vfsmount *m)
 
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER)
 		seq_printf(s, ",multiuser");
-	else if (tcon->ses->userName)
-		seq_printf(s, ",username=%s", tcon->ses->userName);
+	else if (tcon->ses->user_name)
+		seq_printf(s, ",username=%s", tcon->ses->user_name);
 
 	if (tcon->ses->domainName)
 		seq_printf(s, ",domain=%s", tcon->ses->domainName);
@@ -618,16 +607,31 @@ static loff_t cifs_llseek(struct file *file, loff_t offset, int origin)
 {
 	/* origin == SEEK_END => we must revalidate the cached file length */
 	if (origin == SEEK_END) {
-		int retval;
-
-		/* some applications poll for the file length in this strange
-		   way so we must seek to end on non-oplocked files by
-		   setting the revalidate time to zero */
-		CIFS_I(file->f_path.dentry->d_inode)->time = 0;
-
-		retval = cifs_revalidate_file(file);
-		if (retval < 0)
-			return (loff_t)retval;
+		int rc;
+		struct inode *inode = file->f_path.dentry->d_inode;
+
+		/*
+		 * We need to be sure that all dirty pages are written and the
+		 * server has the newest file length.
+		 */
+		if (!CIFS_I(inode)->clientCanCacheRead && inode->i_mapping &&
+		    inode->i_mapping->nrpages != 0) {
+			rc = filemap_fdatawait(inode->i_mapping);
+			if (rc) {
+				mapping_set_error(inode->i_mapping, rc);
+				return rc;
+			}
+		}
+		/*
+		 * Some applications poll for the file length in this strange
+		 * way so we must seek to end on non-oplocked files by
+		 * setting the revalidate time to zero.
+		 */
+		CIFS_I(inode)->time = 0;
+
+		rc = cifs_revalidate_file_attr(file);
+		if (rc < 0)
+			return (loff_t)rc;
 	}
 	return generic_file_llseek_unlocked(file, offset, origin);
 }
@@ -760,10 +764,11 @@ const struct file_operations cifs_file_strict_ops = {
 };
 
 const struct file_operations cifs_file_direct_ops = {
-	/* no aio, no readv -
-	   BB reevaluate whether they can be done with directio, no cache */
-	.read = cifs_user_read,
-	.write = cifs_user_write,
+	/* BB reevaluate whether they can be done with directio, no cache */
+	.read = do_sync_read,
+	.write = do_sync_write,
+	.aio_read = cifs_user_readv,
+	.aio_write = cifs_user_writev,
 	.open = cifs_open,
 	.release = cifs_close,
 	.lock = cifs_lock,
@@ -815,10 +820,11 @@ const struct file_operations cifs_file_strict_nobrl_ops = {
 };
 
 const struct file_operations cifs_file_direct_nobrl_ops = {
-	/* no mmap, no aio, no readv -
-	   BB reevaluate whether they can be done with directio, no cache */
-	.read = cifs_user_read,
-	.write = cifs_user_write,
+	/* BB reevaluate whether they can be done with directio, no cache */
+	.read = do_sync_read,
+	.write = do_sync_write,
+	.aio_read = cifs_user_readv,
+	.aio_write = cifs_user_writev,
 	.open = cifs_open,
 	.release = cifs_close,
 	.fsync = cifs_fsync,
@@ -981,10 +987,10 @@ init_cifs(void)
 	int rc = 0;
 	cifs_proc_init();
 	INIT_LIST_HEAD(&cifs_tcp_ses_list);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* unused temporarily */
 	INIT_LIST_HEAD(&GlobalDnotifyReqList);
 	INIT_LIST_HEAD(&GlobalDnotifyRsp_Q);
-#endif
+#endif /* was needed for dnotify, and will be needed for inotify when VFS fix */
 /*
  *  Initialize Global counters
  */
@@ -1033,22 +1039,33 @@ init_cifs(void)
 	if (rc)
 		goto out_destroy_mids;
 
-	rc = register_filesystem(&cifs_fs_type);
-	if (rc)
-		goto out_destroy_request_bufs;
 #ifdef CONFIG_CIFS_UPCALL
 	rc = register_key_type(&cifs_spnego_key_type);
 	if (rc)
-		goto out_unregister_filesystem;
-#endif
+		goto out_destroy_request_bufs;
+#endif /* CONFIG_CIFS_UPCALL */
+
+#ifdef CONFIG_CIFS_ACL
+	rc = init_cifs_idmap();
+	if (rc)
+		goto out_register_key_type;
+#endif /* CONFIG_CIFS_ACL */
+
+	rc = register_filesystem(&cifs_fs_type);
+	if (rc)
+		goto out_init_cifs_idmap;
 
 	return 0;
 
-#ifdef CONFIG_CIFS_UPCALL
-out_unregister_filesystem:
-	unregister_filesystem(&cifs_fs_type);
+out_init_cifs_idmap:
+#ifdef CONFIG_CIFS_ACL
+	exit_cifs_idmap();
+out_register_key_type:
 #endif
+#ifdef CONFIG_CIFS_UPCALL
+	unregister_key_type(&cifs_spnego_key_type);
 out_destroy_request_bufs:
+#endif
 	cifs_destroy_request_bufs();
 out_destroy_mids:
 	cifs_destroy_mids();
@@ -1070,6 +1087,10 @@ exit_cifs(void)
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	cifs_dfs_release_automount_timer();
 #endif
+#ifdef CONFIG_CIFS_ACL
+	cifs_destroy_idmaptrees();
+	exit_cifs_idmap();
+#endif
 #ifdef CONFIG_CIFS_UPCALL
 	unregister_key_type(&cifs_spnego_key_type);
 #endif
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index a9371b6578c..64313f778eb 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -47,7 +47,7 @@ extern void cifs_sb_deactive(struct super_block *sb);
 
 /* Functions related to inodes */
 extern const struct inode_operations cifs_dir_inode_ops;
-extern struct inode *cifs_root_iget(struct super_block *, unsigned long);
+extern struct inode *cifs_root_iget(struct super_block *);
 extern int cifs_create(struct inode *, struct dentry *, int,
 		       struct nameidata *);
 extern struct dentry *cifs_lookup(struct inode *, struct dentry *,
@@ -59,9 +59,11 @@ extern int cifs_mkdir(struct inode *, struct dentry *, int);
 extern int cifs_rmdir(struct inode *, struct dentry *);
 extern int cifs_rename(struct inode *, struct dentry *, struct inode *,
 		       struct dentry *);
+extern int cifs_revalidate_file_attr(struct file *filp);
+extern int cifs_revalidate_dentry_attr(struct dentry *);
 extern int cifs_revalidate_file(struct file *filp);
 extern int cifs_revalidate_dentry(struct dentry *);
-extern void cifs_invalidate_mapping(struct inode *inode);
+extern int cifs_invalidate_mapping(struct inode *inode);
 extern int cifs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 extern int cifs_setattr(struct dentry *, struct iattr *);
 
@@ -80,12 +82,12 @@ extern const struct file_operations cifs_file_strict_nobrl_ops;
 extern int cifs_open(struct inode *inode, struct file *file);
 extern int cifs_close(struct inode *inode, struct file *file);
 extern int cifs_closedir(struct inode *inode, struct file *file);
-extern ssize_t cifs_user_read(struct file *file, char __user *read_data,
-			      size_t read_size, loff_t *poffset);
+extern ssize_t cifs_user_readv(struct kiocb *iocb, const struct iovec *iov,
+			       unsigned long nr_segs, loff_t pos);
 extern ssize_t cifs_strict_readv(struct kiocb *iocb, const struct iovec *iov,
 				 unsigned long nr_segs, loff_t pos);
-extern ssize_t cifs_user_write(struct file *file, const char __user *write_data,
-			       size_t write_size, loff_t *poffset);
+extern ssize_t cifs_user_writev(struct kiocb *iocb, const struct iovec *iov,
+				unsigned long nr_segs, loff_t pos);
 extern ssize_t cifs_strict_writev(struct kiocb *iocb, const struct iovec *iov,
 				  unsigned long nr_segs, loff_t pos);
 extern int cifs_lock(struct file *, int, struct file_lock *);
@@ -123,9 +125,9 @@ extern ssize_t	cifs_getxattr(struct dentry *, const char *, void *, size_t);
 extern ssize_t	cifs_listxattr(struct dentry *, char *, size_t);
 extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CIFS_NFSD_EXPORT
 extern const struct export_operations cifs_export_ops;
-#endif /* EXPERIMENTAL */
+#endif /* CIFS_NFSD_EXPORT */
 
-#define CIFS_VERSION   "1.71"
+#define CIFS_VERSION   "1.72"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 17afb0fbcae..76b4517e74b 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -37,10 +37,9 @@
 
 #define MAX_TREE_SIZE (2 + MAX_SERVER_SIZE + 1 + MAX_SHARE_SIZE + 1)
 #define MAX_SERVER_SIZE 15
-#define MAX_SHARE_SIZE  64	/* used to be 20, this should still be enough */
-#define MAX_USERNAME_SIZE 32	/* 32 is to allow for 15 char names + null
-				   termination then *2 for unicode versions */
-#define MAX_PASSWORD_SIZE 512  /* max for windows seems to be 256 wide chars */
+#define MAX_SHARE_SIZE 80
+#define MAX_USERNAME_SIZE 256	/* reasonable maximum for current servers */
+#define MAX_PASSWORD_SIZE 512	/* max for windows seems to be 256 wide chars */
 
 #define CIFS_MIN_RCV_POOL 4
 
@@ -92,7 +91,8 @@ enum statusEnum {
 	CifsNew = 0,
 	CifsGood,
 	CifsExiting,
-	CifsNeedReconnect
+	CifsNeedReconnect,
+	CifsNeedNegotiate
 };
 
 enum securityEnum {
@@ -274,7 +274,8 @@ struct cifsSesInfo {
 	int capabilities;
 	char serverName[SERVER_NAME_LEN_WITH_NULL * 2];	/* BB make bigger for
 				TCP names - will ipv6 and sctp addresses fit? */
-	char userName[MAX_USERNAME_SIZE + 1];
+	char *user_name;	/* must not be null except during init of sess
+				   and after mount option parsing we fill it */
 	char *domainName;
 	char *password;
 	struct session_key auth_key;
@@ -780,10 +781,12 @@ GLOBAL_EXTERN spinlock_t		cifs_tcp_ses_lock;
  */
 GLOBAL_EXTERN spinlock_t	cifs_file_list_lock;
 
+#ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* unused temporarily */
 /* Outstanding dir notify requests */
 GLOBAL_EXTERN struct list_head GlobalDnotifyReqList;
 /* DirNotify response queue */
 GLOBAL_EXTERN struct list_head GlobalDnotifyRsp_Q;
+#endif /* was needed for dnotify, and will be needed for inotify when VFS fix */
 
 /*
  * Global transaction id (XID) information
@@ -817,7 +820,6 @@ GLOBAL_EXTERN unsigned int multiuser_mount; /* if enabled allows new sessions
 				have the uid/password or Kerberos credential
 				or equivalent for current user */
 GLOBAL_EXTERN unsigned int oplockEnabled;
-GLOBAL_EXTERN unsigned int experimEnabled;
 GLOBAL_EXTERN unsigned int lookupCacheEnabled;
 GLOBAL_EXTERN unsigned int global_secflags;	/* if on, session setup sent
 				with more secure ntlmssp2 challenge/resp */
@@ -831,6 +833,11 @@ GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
 /* reconnect after this many failed echo attempts */
 GLOBAL_EXTERN unsigned short echo_retries;
 
+GLOBAL_EXTERN struct rb_root uidtree;
+GLOBAL_EXTERN struct rb_root gidtree;
+GLOBAL_EXTERN spinlock_t siduidlock;
+GLOBAL_EXTERN spinlock_t sidgidlock;
+
 void cifs_oplock_break(struct work_struct *work);
 void cifs_oplock_break_get(struct cifsFileInfo *cfile);
 void cifs_oplock_break_put(struct cifsFileInfo *cfile);
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index b5c8cc5d7a7..de3aa285de0 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -397,9 +397,9 @@
 #define GETU32(var)  (*((__u32 *)var))	/* BB check for endian issues */
 
 struct smb_hdr {
-	__u32 smb_buf_length;	/* big endian on wire *//* BB length is only two
-		or three bytes - with one or two byte type preceding it that are
-		zero - we could mask the type byte off just in case BB */
+	__be32 smb_buf_length;	/* BB length is only two (rarely three) bytes,
+		with one or two byte "type" preceding it that will be
+		zero - we could mask the type byte off */
 	__u8 Protocol[4];
 	__u8 Command;
 	union {
@@ -428,43 +428,28 @@ struct smb_hdr {
 	__u8 WordCount;
 } __attribute__((packed));
 
-/* given a pointer to an smb_hdr retrieve a char pointer to the byte count */
-#define BCC(smb_var) ((unsigned char *)(smb_var) + sizeof(struct smb_hdr) + \
-			 (2 * (smb_var)->WordCount))
+/* given a pointer to an smb_hdr, retrieve a void pointer to the ByteCount */
+static inline void *
+BCC(struct smb_hdr *smb)
+{
+	return (void *)smb + sizeof(*smb) + 2 * smb->WordCount;
+}
 
 /* given a pointer to an smb_hdr retrieve the pointer to the byte area */
 #define pByteArea(smb_var) (BCC(smb_var) + 2)
 
-/* get the converted ByteCount for a SMB packet and return it */
-static inline __u16
-get_bcc(struct smb_hdr *hdr)
-{
-	__u16 *bc_ptr = (__u16 *)BCC(hdr);
-
-	return get_unaligned(bc_ptr);
-}
-
 /* get the unconverted ByteCount for a SMB packet and return it */
 static inline __u16
-get_bcc_le(struct smb_hdr *hdr)
+get_bcc(struct smb_hdr *hdr)
 {
 	__le16 *bc_ptr = (__le16 *)BCC(hdr);
 
 	return get_unaligned_le16(bc_ptr);
 }
 
-/* set the ByteCount for a SMB packet in host-byte order */
-static inline void
-put_bcc(__u16 count, struct smb_hdr *hdr)
-{
-	__u16 *bc_ptr = (__u16 *)BCC(hdr);
-
-	put_unaligned(count, bc_ptr);
-}
-
 /* set the ByteCount for a SMB packet in little-endian */
 static inline void
-put_bcc_le(__u16 count, struct smb_hdr *hdr)
+put_bcc(__u16 count, struct smb_hdr *hdr)
 {
 	__le16 *bc_ptr = (__le16 *)BCC(hdr);
 
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 8096f27ad9a..6e69e06a30b 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -53,6 +53,9 @@ do {								\
 	cFYI(1, "CIFS VFS: leaving %s (xid = %d) rc = %d",	\
 	     __func__, curr_xid, (int)rc);			\
 } while (0)
+extern int init_cifs_idmap(void);
+extern void exit_cifs_idmap(void);
+extern void cifs_destroy_idmaptrees(void);
 extern char *build_path_from_dentry(struct dentry *);
 extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
 					struct cifsTconInfo *tcon);
@@ -90,7 +93,6 @@ extern void cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
 extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *, bool);
 extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *, bool);
 extern unsigned int smbCalcSize(struct smb_hdr *ptr);
-extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
 			struct TCP_Server_Info *server);
 extern int cifs_convert_address(struct sockaddr *dst, const char *src, int len);
@@ -143,8 +145,10 @@ extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
 extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64);
 extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *,
 					const char *, u32 *);
+extern int set_cifs_acl(struct cifs_ntsd *, __u32, struct inode *,
+				const char *);
 
-extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
+extern int cifs_mount(struct super_block *, struct cifs_sb_info *,
 			const char *);
 extern int cifs_umount(struct super_block *, struct cifs_sb_info *);
 extern void cifs_dfs_release_automount_timer(void);
@@ -304,12 +308,13 @@ extern int CIFSSMBUnixQuerySymLink(const int xid,
 			struct cifsTconInfo *tcon,
 			const unsigned char *searchName, char **syminfo,
 			const struct nls_table *nls_codepage);
+#ifdef CONFIG_CIFS_SYMLINK_EXPERIMENTAL
 extern int CIFSSMBQueryReparseLinkInfo(const int xid,
 			struct cifsTconInfo *tcon,
 			const unsigned char *searchName,
 			char *symlinkinfo, const int buflen, __u16 fid,
 			const struct nls_table *nls_codepage);
-
+#endif /* temporarily unused until cifs_symlink fixed */
 extern int CIFSSMBOpen(const int xid, struct cifsTconInfo *tcon,
 			const char *fileName, const int disposition,
 			const int access_flags, const int omode,
@@ -348,8 +353,6 @@ extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon,
 			const unsigned char *searchName, __u64 *inode_number,
 			const struct nls_table *nls_codepage,
 			int remap_special_chars);
-extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
-			const struct nls_table *cp, int mapChars);
 
 extern int CIFSSMBLock(const int xid, struct cifsTconInfo *tcon,
 			const __u16 netfid, const __u64 len,
@@ -383,9 +386,15 @@ extern void cifs_crypto_shash_release(struct TCP_Server_Info *);
 extern int calc_seckey(struct cifsSesInfo *);
 
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
-extern void calc_lanman_hash(const char *password, const char *cryptkey,
+extern int calc_lanman_hash(const char *password, const char *cryptkey,
 				bool encrypt, char *lnm_session_key);
 #endif /* CIFS_WEAK_PW_HASH */
+#ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* unused temporarily */
+extern int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon,
+			const int notify_subdirs, const __u16 netfid,
+			__u32 filter, struct file *file, int multishot,
+			const struct nls_table *nls_codepage);
+#endif /* was needed for dnotify, and will be needed for inotify when VFS fix */
 extern int CIFSSMBCopy(int xid,
 			struct cifsTconInfo *source_tcon,
 			const char *fromName,
@@ -393,10 +402,6 @@ extern int CIFSSMBCopy(int xid,
 			const char *toName, const int flags,
 			const struct nls_table *nls_codepage,
 			int remap_special_chars);
-extern int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon,
-			const int notify_subdirs, const __u16 netfid,
-			__u32 filter, struct file *file, int multishot,
-			const struct nls_table *nls_codepage);
 extern ssize_t CIFSSMBQAllEAs(const int xid, struct cifsTconInfo *tcon,
 			const unsigned char *searchName,
 			const unsigned char *ea_name, char *EAData,
@@ -427,9 +432,6 @@ extern int CIFSCheckMFSymlink(struct cifs_fattr *fattr,
 		struct cifs_sb_info *cifs_sb, int xid);
 extern int mdfour(unsigned char *, unsigned char *, int);
 extern int E_md4hash(const unsigned char *passwd, unsigned char *p16);
-extern void SMBencrypt(unsigned char *passwd, const unsigned char *c8,
-			unsigned char *p24);
-extern void E_P16(unsigned char *p14, unsigned char *p16);
-extern void E_P24(unsigned char *p21, const unsigned char *c8,
+extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8,
 			unsigned char *p24);
 #endif			/* _CIFSPROTO_H */
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 904aa47e351..83df937b814 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -142,9 +142,9 @@ cifs_reconnect_tcon(struct cifsTconInfo *tcon, int smb_command)
 	 */
 	while (server->tcpStatus == CifsNeedReconnect) {
 		wait_event_interruptible_timeout(server->response_q,
-			(server->tcpStatus == CifsGood), 10 * HZ);
+			(server->tcpStatus != CifsNeedReconnect), 10 * HZ);
 
-		/* is TCP session is reestablished now ?*/
+		/* are we still trying to reconnect? */
 		if (server->tcpStatus != CifsNeedReconnect)
 			break;
 
@@ -339,12 +339,13 @@ static int validate_t2(struct smb_t2_rsp *pSMB)
 	    get_unaligned_le16(&pSMB->t2_rsp.DataOffset) > 1024)
 		goto vt2_err;
 
-	/* check that bcc is at least as big as parms + data */
-	/* check that bcc is less than negotiated smb buffer */
 	total_size = get_unaligned_le16(&pSMB->t2_rsp.ParameterCount);
 	if (total_size >= 512)
 		goto vt2_err;
 
+	/* check that bcc is at least as big as parms + data, and that it is
+	 * less than negotiated smb buffer
+	 */
 	total_size += get_unaligned_le16(&pSMB->t2_rsp.DataCount);
 	if (total_size > get_bcc(&pSMB->hdr) ||
 	    total_size >= CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
@@ -357,6 +358,13 @@ vt2_err:
 	return -EINVAL;
 }
 
+static inline void inc_rfc1001_len(void *pSMB, int count)
+{
+	struct smb_hdr *hdr = (struct smb_hdr *)pSMB;
+
+	be32_add_cpu(&hdr->smb_buf_length, count);
+}
+
 int
 CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 {
@@ -409,7 +417,7 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 		count += strlen(protocols[i].name) + 1;
 		/* null at end of source and target buffers anyway */
 	}
-	pSMB->hdr.smb_buf_length += count;
+	inc_rfc1001_len(pSMB, count);
 	pSMB->ByteCount = cpu_to_le16(count);
 
 	rc = SendReceive(xid, ses, (struct smb_hdr *) pSMB,
@@ -541,10 +549,6 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 		server->secType = RawNTLMSSP;
 	else if (secFlags & CIFSSEC_MAY_LANMAN)
 		server->secType = LANMAN;
-/* #ifdef CONFIG_CIFS_EXPERIMENTAL
-	else if (secFlags & CIFSSEC_MAY_PLNTXT)
-		server->secType = ??
-#endif */
 	else {
 		rc = -EOPNOTSUPP;
 		cERROR(1, "Invalid security type");
@@ -578,7 +582,7 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 
 	if ((pSMBr->hdr.Flags2 & SMBFLG2_EXT_SEC) &&
 		(server->capabilities & CAP_EXTENDED_SECURITY)) {
-		count = pSMBr->ByteCount;
+		count = get_bcc(&pSMBr->hdr);
 		if (count < 16) {
 			rc = -EIO;
 			goto neg_err_exit;
@@ -729,12 +733,12 @@ CIFSSMBEcho(struct TCP_Server_Info *server)
 		return rc;
 
 	/* set up echo request */
-	smb->hdr.Tid = cpu_to_le16(0xffff);
+	smb->hdr.Tid = 0xffff;
 	smb->hdr.WordCount = 1;
 	put_unaligned_le16(1, &smb->EchoCount);
-	put_bcc_le(1, &smb->hdr);
+	put_bcc(1, &smb->hdr);
 	smb->Data[0] = 'a';
-	smb->hdr.smb_buf_length += 3;
+	inc_rfc1001_len(smb, 3);
 
 	rc = cifs_call_async(server, (struct smb_hdr *)smb,
 				cifs_echo_callback, server);
@@ -852,7 +856,7 @@ PsxDelete:
 	pSMB->TotalParameterCount = pSMB->ParameterCount;
 	pSMB->InformationLevel = cpu_to_le16(SMB_POSIX_UNLINK);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -898,7 +902,7 @@ DelFileRetry:
 	pSMB->SearchAttributes =
 	    cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM);
 	pSMB->BufferFormat = 0x04;
-	pSMB->hdr.smb_buf_length += name_len + 1;
+	inc_rfc1001_len(pSMB, name_len + 1);
 	pSMB->ByteCount = cpu_to_le16(name_len + 1);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -942,7 +946,7 @@ RmDirRetry:
 	}
 
 	pSMB->BufferFormat = 0x04;
-	pSMB->hdr.smb_buf_length += name_len + 1;
+	inc_rfc1001_len(pSMB, name_len + 1);
 	pSMB->ByteCount = cpu_to_le16(name_len + 1);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -985,7 +989,7 @@ MkDirRetry:
 	}
 
 	pSMB->BufferFormat = 0x04;
-	pSMB->hdr.smb_buf_length += name_len + 1;
+	inc_rfc1001_len(pSMB, name_len + 1);
 	pSMB->ByteCount = cpu_to_le16(name_len + 1);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -1063,7 +1067,7 @@ PsxCreat:
 	pSMB->TotalParameterCount = pSMB->ParameterCount;
 	pSMB->InformationLevel = cpu_to_le16(SMB_POSIX_OPEN);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -1075,7 +1079,7 @@ PsxCreat:
 	cFYI(1, "copying inode info");
 	rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-	if (rc || (pSMBr->ByteCount < sizeof(OPEN_PSX_RSP))) {
+	if (rc || get_bcc(&pSMBr->hdr) < sizeof(OPEN_PSX_RSP)) {
 		rc = -EIO;	/* bad smb */
 		goto psx_create_err;
 	}
@@ -1096,7 +1100,7 @@ PsxCreat:
 		pRetData->Type = cpu_to_le32(-1); /* unknown */
 		cFYI(DBG2, "unknown type");
 	} else {
-		if (pSMBr->ByteCount < sizeof(OPEN_PSX_RSP)
+		if (get_bcc(&pSMBr->hdr) < sizeof(OPEN_PSX_RSP)
 					+ sizeof(FILE_UNIX_BASIC_INFO)) {
 			cERROR(1, "Open response data too small");
 			pRetData->Type = cpu_to_le32(-1);
@@ -1228,7 +1232,7 @@ OldOpenRetry:
 	pSMB->Sattr = cpu_to_le16(ATTR_HIDDEN | ATTR_SYSTEM | ATTR_DIRECTORY);
 	pSMB->OpenFunction = cpu_to_le16(convert_disposition(openDisposition));
 	count += name_len;
-	pSMB->hdr.smb_buf_length += count;
+	inc_rfc1001_len(pSMB, count);
 
 	pSMB->ByteCount = cpu_to_le16(count);
 	/* long_op set to 1 to allow for oplock break timeouts */
@@ -1341,7 +1345,7 @@ openRetry:
 	    SECURITY_CONTEXT_TRACKING | SECURITY_EFFECTIVE_ONLY;
 
 	count += name_len;
-	pSMB->hdr.smb_buf_length += count;
+	inc_rfc1001_len(pSMB, count);
 
 	pSMB->ByteCount = cpu_to_le16(count);
 	/* long_op set to 1 to allow for oplock break timeouts */
@@ -1426,7 +1430,7 @@ CIFSSMBRead(const int xid, struct cifsTconInfo *tcon, const int netfid,
 	}
 
 	iov[0].iov_base = (char *)pSMB;
-	iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
+	iov[0].iov_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 4;
 	rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovecs */,
 			 &resp_buf_type, CIFS_LOG_ERROR);
 	cifs_stats_inc(&tcon->num_reads);
@@ -1560,7 +1564,7 @@ CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon,
 
 	pSMB->DataLengthLow = cpu_to_le16(bytes_sent & 0xFFFF);
 	pSMB->DataLengthHigh = cpu_to_le16(bytes_sent >> 16);
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 
 	if (wct == 14)
 		pSMB->ByteCount = cpu_to_le16(byte_count);
@@ -1644,11 +1648,12 @@ CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon,
 
 	pSMB->DataLengthLow = cpu_to_le16(count & 0xFFFF);
 	pSMB->DataLengthHigh = cpu_to_le16(count >> 16);
-	smb_hdr_len = pSMB->hdr.smb_buf_length + 1; /* hdr + 1 byte pad */
+	/* header + 1 byte pad */
+	smb_hdr_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 1;
 	if (wct == 14)
-		pSMB->hdr.smb_buf_length += count+1;
+		inc_rfc1001_len(pSMB, count + 1);
 	else /* wct == 12 */
-		pSMB->hdr.smb_buf_length += count+5; /* smb data starts later */
+		inc_rfc1001_len(pSMB, count + 5); /* smb data starts later */
 	if (wct == 14)
 		pSMB->ByteCount = cpu_to_le16(count + 1);
 	else /* wct == 12 */ /* bigger pad, smaller smb hdr, keep offset ok */ {
@@ -1748,7 +1753,7 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon,
 		/* oplock break */
 		count = 0;
 	}
-	pSMB->hdr.smb_buf_length += count;
+	inc_rfc1001_len(pSMB, count);
 	pSMB->ByteCount = cpu_to_le16(count);
 
 	if (waitFlag) {
@@ -1839,14 +1844,14 @@ CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
 	pSMB->Fid = smb_file_id;
 	pSMB->InformationLevel = cpu_to_le16(SMB_SET_POSIX_LOCK);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	if (waitFlag) {
 		rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
 			(struct smb_hdr *) pSMBr, &bytes_returned);
 	} else {
 		iov[0].iov_base = (char *)pSMB;
-		iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
+		iov[0].iov_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 4;
 		rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovecs */,
 				&resp_buf_type, timeout);
 		pSMB = NULL; /* request buf already freed by SendReceive2. Do
@@ -1862,7 +1867,7 @@ CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
 		__u16 data_count;
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < sizeof(struct cifs_posix_lock))) {
+		if (rc || get_bcc(&pSMBr->hdr) < sizeof(*parm_data)) {
 			rc = -EIO;      /* bad smb */
 			goto plk_err_exit;
 		}
@@ -1884,10 +1889,10 @@ CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
 					__constant_cpu_to_le16(CIFS_WRLCK))
 				pLockData->fl_type = F_WRLCK;
 
-			pLockData->fl_start = parm_data->start;
-			pLockData->fl_end = parm_data->start +
-						parm_data->length - 1;
-			pLockData->fl_pid = parm_data->pid;
+			pLockData->fl_start = le64_to_cpu(parm_data->start);
+			pLockData->fl_end = pLockData->fl_start +
+					le64_to_cpu(parm_data->length) - 1;
+			pLockData->fl_pid = le32_to_cpu(parm_data->pid);
 		}
 	}
 
@@ -2012,7 +2017,7 @@ renameRetry:
 	}
 
 	count = 1 /* 1st signature byte */  + name_len + name_len2;
-	pSMB->hdr.smb_buf_length += count;
+	inc_rfc1001_len(pSMB, count);
 	pSMB->ByteCount = cpu_to_le16(count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2092,7 +2097,7 @@ int CIFSSMBRenameOpenFile(const int xid, struct cifsTconInfo *pTcon,
 	pSMB->InformationLevel =
 		cpu_to_le16(SMB_SET_FILE_RENAME_INFORMATION);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, pTcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -2159,7 +2164,7 @@ copyRetry:
 	}
 
 	count = 1 /* 1st signature byte */  + name_len + name_len2;
-	pSMB->hdr.smb_buf_length += count;
+	inc_rfc1001_len(pSMB, count);
 	pSMB->ByteCount = cpu_to_le16(count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2249,7 +2254,7 @@ createSymLinkRetry:
 	pSMB->DataOffset = cpu_to_le16(offset);
 	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_LINK);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -2335,7 +2340,7 @@ createHardLinkRetry:
 	pSMB->DataOffset = cpu_to_le16(offset);
 	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_HLINK);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -2406,7 +2411,7 @@ winCreateHardLinkRetry:
 	}
 
 	count = 1 /* string type byte */  + name_len + name_len2;
-	pSMB->hdr.smb_buf_length += count;
+	inc_rfc1001_len(pSMB, count);
 	pSMB->ByteCount = cpu_to_le16(count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2477,7 +2482,7 @@ querySymLinkRetry:
 	pSMB->ParameterCount = pSMB->TotalParameterCount;
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_LINK);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2489,7 +2494,7 @@ querySymLinkRetry:
 
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 		/* BB also check enough total bytes returned */
-		if (rc || (pSMBr->ByteCount < 2))
+		if (rc || get_bcc(&pSMBr->hdr) < 2)
 			rc = -EIO;
 		else {
 			bool is_unicode;
@@ -2516,7 +2521,17 @@ querySymLinkRetry:
 	return rc;
 }
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_SYMLINK_EXPERIMENTAL
+/*
+ *	Recent Windows versions now create symlinks more frequently
+ *	and they use the "reparse point" mechanism below.  We can of course
+ *	do symlinks nicely to Samba and other servers which support the
+ *	CIFS Unix Extensions and we can also do SFU symlinks and "client only"
+ *	"MF" symlinks optionally, but for recent Windows we really need to
+ *	reenable the code below and fix the cifs_symlink callers to handle this.
+ *	In the interim this code has been moved to its own config option so
+ *	it is not compiled in by default until callers fixed up and more tested.
+ */
 int
 CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 			const unsigned char *searchName,
@@ -2561,14 +2576,14 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 	} else {		/* decode response */
 		__u32 data_offset = le32_to_cpu(pSMBr->DataOffset);
 		__u32 data_count = le32_to_cpu(pSMBr->DataCount);
-		if ((pSMBr->ByteCount < 2) || (data_offset > 512)) {
-		/* BB also check enough total bytes returned */
+		if (get_bcc(&pSMBr->hdr) < 2 || data_offset > 512) {
+			/* BB also check enough total bytes returned */
 			rc = -EIO;	/* bad smb */
 			goto qreparse_out;
 		}
 		if (data_count && (data_count < 2048)) {
 			char *end_of_smb = 2 /* sizeof byte count */ +
-				pSMBr->ByteCount + (char *)&pSMBr->ByteCount;
+			       get_bcc(&pSMBr->hdr) + (char *)&pSMBr->ByteCount;
 
 			struct reparse_data *reparse_buf =
 						(struct reparse_data *)
@@ -2618,7 +2633,7 @@ qreparse_out:
 
 	return rc;
 }
-#endif /* CIFS_EXPERIMENTAL */
+#endif /* CIFS_SYMLINK_EXPERIMENTAL */ /* BB temporarily unused */
 
 #ifdef CONFIG_CIFS_POSIX
 
@@ -2814,7 +2829,7 @@ queryAclRetry:
 	pSMB->ParameterCount = pSMB->TotalParameterCount;
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_POSIX_ACL);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2826,8 +2841,8 @@ queryAclRetry:
 		/* decode response */
 
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
-		if (rc || (pSMBr->ByteCount < 2))
 		/* BB also check enough total bytes returned */
+		if (rc || get_bcc(&pSMBr->hdr) < 2)
 			rc = -EIO;      /* bad smb */
 		else {
 			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -2908,7 +2923,7 @@ setAclRetry:
 	pSMB->ParameterCount = cpu_to_le16(params);
 	pSMB->TotalParameterCount = pSMB->ParameterCount;
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -2966,7 +2981,7 @@ GetExtAttrRetry:
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_ATTR_FLAGS);
 	pSMB->Pad = 0;
 	pSMB->Fid = netfid;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->t2.ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -2976,8 +2991,8 @@ GetExtAttrRetry:
 	} else {
 		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
-		if (rc || (pSMBr->ByteCount < 2))
 		/* BB also check enough total bytes returned */
+		if (rc || get_bcc(&pSMBr->hdr) < 2)
 			/* If rc should we check for EOPNOSUPP and
 			   disable the srvino flag? or in caller? */
 			rc = -EIO;      /* bad smb */
@@ -3052,6 +3067,7 @@ validate_ntransact(char *buf, char **ppparm, char **ppdata,
 	char *end_of_smb;
 	__u32 data_count, data_offset, parm_count, parm_offset;
 	struct smb_com_ntransact_rsp *pSMBr;
+	u16 bcc;
 
 	*pdatalen = 0;
 	*pparmlen = 0;
@@ -3061,8 +3077,8 @@ validate_ntransact(char *buf, char **ppparm, char **ppdata,
 
 	pSMBr = (struct smb_com_ntransact_rsp *)buf;
 
-	/* ByteCount was converted from little endian in SendReceive */
-	end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
+	bcc = get_bcc(&pSMBr->hdr);
+	end_of_smb = 2 /* sizeof byte count */ + bcc +
 			(char *)&pSMBr->ByteCount;
 
 	data_offset = le32_to_cpu(pSMBr->DataOffset);
@@ -3088,7 +3104,7 @@ validate_ntransact(char *buf, char **ppparm, char **ppdata,
 			*ppdata, data_count, (data_count + *ppdata),
 			end_of_smb, pSMBr);
 		return -EINVAL;
-	} else if (parm_count + data_count > pSMBr->ByteCount) {
+	} else if (parm_count + data_count > bcc) {
 		cFYI(1, "parm count and data count larger than SMB");
 		return -EINVAL;
 	}
@@ -3124,9 +3140,9 @@ CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid,
 	pSMB->AclFlags = cpu_to_le32(CIFS_ACL_OWNER | CIFS_ACL_GROUP |
 				     CIFS_ACL_DACL);
 	pSMB->ByteCount = cpu_to_le16(11); /* 3 bytes pad + 8 bytes parm */
-	pSMB->hdr.smb_buf_length += 11;
+	inc_rfc1001_len(pSMB, 11);
 	iov[0].iov_base = (char *)pSMB;
-	iov[0].iov_len = pSMB->hdr.smb_buf_length + 4;
+	iov[0].iov_len = be32_to_cpu(pSMB->hdr.smb_buf_length) + 4;
 
 	rc = SendReceive2(xid, tcon->ses, iov, 1 /* num iovec */, &buf_type,
 			 0);
@@ -3235,10 +3251,9 @@ setCifsAclRetry:
 		memcpy((char *) &pSMBr->hdr.Protocol + data_offset,
 			(char *) pntsd,
 			acllen);
-		pSMB->hdr.smb_buf_length += (byte_count + data_count);
-
+		inc_rfc1001_len(pSMB, byte_count + data_count);
 	} else
-		pSMB->hdr.smb_buf_length += byte_count;
+		inc_rfc1001_len(pSMB, byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 		(struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -3289,7 +3304,7 @@ QInfRetry:
 	}
 	pSMB->BufferFormat = 0x04;
 	name_len++; /* account for buffer type byte */
-	pSMB->hdr.smb_buf_length += (__u16) name_len;
+	inc_rfc1001_len(pSMB, (__u16)name_len);
 	pSMB->ByteCount = cpu_to_le16(name_len);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -3364,7 +3379,7 @@ QFileInfoRetry:
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_ALL_INFO);
 	pSMB->Pad = 0;
 	pSMB->Fid = netfid;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -3375,7 +3390,7 @@ QFileInfoRetry:
 
 		if (rc) /* BB add auto retry on EOPNOTSUPP? */
 			rc = -EIO;
-		else if (pSMBr->ByteCount < 40)
+		else if (get_bcc(&pSMBr->hdr) < 40)
 			rc = -EIO;	/* bad smb */
 		else if (pFindData) {
 			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -3451,7 +3466,7 @@ QPathInfoRetry:
 	else
 		pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_ALL_INFO);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -3463,9 +3478,9 @@ QPathInfoRetry:
 
 		if (rc) /* BB add auto retry on EOPNOTSUPP? */
 			rc = -EIO;
-		else if (!legacy && (pSMBr->ByteCount < 40))
+		else if (!legacy && get_bcc(&pSMBr->hdr) < 40)
 			rc = -EIO;	/* bad smb */
-		else if (legacy && (pSMBr->ByteCount < 24))
+		else if (legacy && get_bcc(&pSMBr->hdr) < 24)
 			rc = -EIO;  /* 24 or 26 expected but we do not read
 					last field */
 		else if (pFindData) {
@@ -3532,7 +3547,7 @@ UnixQFileInfoRetry:
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_BASIC);
 	pSMB->Pad = 0;
 	pSMB->Fid = netfid;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -3541,7 +3556,7 @@ UnixQFileInfoRetry:
 	} else {		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < sizeof(FILE_UNIX_BASIC_INFO))) {
+		if (rc || get_bcc(&pSMBr->hdr) < sizeof(FILE_UNIX_BASIC_INFO)) {
 			cERROR(1, "Malformed FILE_UNIX_BASIC_INFO response.\n"
 				   "Unix Extensions can be disabled on mount "
 				   "by specifying the nosfu mount option.");
@@ -3617,7 +3632,7 @@ UnixQPathInfoRetry:
 	pSMB->ParameterCount = pSMB->TotalParameterCount;
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_UNIX_BASIC);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -3627,7 +3642,7 @@ UnixQPathInfoRetry:
 	} else {		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < sizeof(FILE_UNIX_BASIC_INFO))) {
+		if (rc || get_bcc(&pSMBr->hdr) < sizeof(FILE_UNIX_BASIC_INFO)) {
 			cERROR(1, "Malformed FILE_UNIX_BASIC_INFO response.\n"
 				   "Unix Extensions can be disabled on mount "
 				   "by specifying the nosfu mount option.");
@@ -3731,7 +3746,7 @@ findFirstRetry:
 
 	/* BB what should we set StorageType to? Does it matter? BB */
 	pSMB->SearchStorageType = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -3860,7 +3875,7 @@ int CIFSFindNext(const int xid, struct cifsTconInfo *tcon,
 	byte_count = params + 1 /* pad */ ;
 	pSMB->TotalParameterCount = cpu_to_le16(params);
 	pSMB->ParameterCount = pSMB->TotalParameterCount;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4022,7 +4037,7 @@ GetInodeNumberRetry:
 	pSMB->ParameterCount = pSMB->TotalParameterCount;
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FILE_INTERNAL_INFO);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4032,8 +4047,8 @@ GetInodeNumberRetry:
 	} else {
 		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
-		if (rc || (pSMBr->ByteCount < 2))
 		/* BB also check enough total bytes returned */
+		if (rc || get_bcc(&pSMBr->hdr) < 2)
 			/* If rc should we check for EOPNOSUPP and
 			disable the srvino flag? or in caller? */
 			rc = -EIO;      /* bad smb */
@@ -4246,7 +4261,7 @@ getDFSRetry:
 	pSMB->ParameterCount = cpu_to_le16(params);
 	pSMB->TotalParameterCount = pSMB->ParameterCount;
 	pSMB->MaxReferralLevel = cpu_to_le16(3);
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, ses, (struct smb_hdr *) pSMB,
@@ -4258,13 +4273,13 @@ getDFSRetry:
 	rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
 	/* BB Also check if enough total bytes returned? */
-	if (rc || (pSMBr->ByteCount < 17)) {
+	if (rc || get_bcc(&pSMBr->hdr) < 17) {
 		rc = -EIO;      /* bad smb */
 		goto GetDFSRefExit;
 	}
 
 	cFYI(1, "Decoding GetDFSRefer response BCC: %d  Offset %d",
-				pSMBr->ByteCount,
+				get_bcc(&pSMBr->hdr),
 				le16_to_cpu(pSMBr->t2.DataOffset));
 
 	/* parse returned result into more usable form */
@@ -4320,7 +4335,7 @@ oldQFSInfoRetry:
 	pSMB->Reserved3 = 0;
 	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
 	pSMB->InformationLevel = cpu_to_le16(SMB_INFO_ALLOCATION);
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4330,12 +4345,12 @@ oldQFSInfoRetry:
 	} else {                /* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < 18))
+		if (rc || get_bcc(&pSMBr->hdr) < 18)
 			rc = -EIO;      /* bad smb */
 		else {
 			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
 			cFYI(1, "qfsinf resp BCC: %d  Offset %d",
-				 pSMBr->ByteCount, data_offset);
+				 get_bcc(&pSMBr->hdr), data_offset);
 
 			response_data = (FILE_SYSTEM_ALLOC_INFO *)
 				(((char *) &pSMBr->hdr.Protocol) + data_offset);
@@ -4399,7 +4414,7 @@ QFSInfoRetry:
 	pSMB->Reserved3 = 0;
 	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_SIZE_INFO);
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4409,7 +4424,7 @@ QFSInfoRetry:
 	} else {		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < 24))
+		if (rc || get_bcc(&pSMBr->hdr) < 24)
 			rc = -EIO;	/* bad smb */
 		else {
 			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -4479,7 +4494,7 @@ QFSAttributeRetry:
 	pSMB->Reserved3 = 0;
 	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_ATTRIBUTE_INFO);
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4489,7 +4504,7 @@ QFSAttributeRetry:
 	} else {		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < 13)) {
+		if (rc || get_bcc(&pSMBr->hdr) < 13) {
 			/* BB also check if enough bytes returned */
 			rc = -EIO;	/* bad smb */
 		} else {
@@ -4550,7 +4565,7 @@ QFSDeviceRetry:
 	pSMB->Reserved3 = 0;
 	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_FS_DEVICE_INFO);
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4560,7 +4575,8 @@ QFSDeviceRetry:
 	} else {		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < sizeof(FILE_SYSTEM_DEVICE_INFO)))
+		if (rc || get_bcc(&pSMBr->hdr) <
+			  sizeof(FILE_SYSTEM_DEVICE_INFO))
 			rc = -EIO;	/* bad smb */
 		else {
 			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -4619,7 +4635,7 @@ QFSUnixRetry:
 	pSMB->Reserved3 = 0;
 	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_CIFS_UNIX_INFO);
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4629,7 +4645,7 @@ QFSUnixRetry:
 	} else {		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < 13)) {
+		if (rc || get_bcc(&pSMBr->hdr) < 13) {
 			rc = -EIO;	/* bad smb */
 		} else {
 			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -4702,7 +4718,7 @@ SETFSUnixRetry:
 	pSMB->ClientUnixMinor = cpu_to_le16(CIFS_UNIX_MINOR_VERSION);
 	pSMB->ClientUnixCap = cpu_to_le64(cap);
 
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4764,7 +4780,7 @@ QFSPosixRetry:
 	pSMB->Reserved3 = 0;
 	pSMB->SubCommand = cpu_to_le16(TRANS2_QUERY_FS_INFORMATION);
 	pSMB->InformationLevel = cpu_to_le16(SMB_QUERY_POSIX_FS_INFO);
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4774,7 +4790,7 @@ QFSPosixRetry:
 	} else {		/* decode response */
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
-		if (rc || (pSMBr->ByteCount < 13)) {
+		if (rc || get_bcc(&pSMBr->hdr) < 13) {
 			rc = -EIO;	/* bad smb */
 		} else {
 			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
@@ -4890,7 +4906,7 @@ SetEOFRetry:
 	pSMB->ParameterCount = cpu_to_le16(params);
 	pSMB->TotalParameterCount = pSMB->ParameterCount;
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	parm_data->FileSize = cpu_to_le64(size);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -4969,7 +4985,7 @@ CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size,
 				cpu_to_le16(SMB_SET_FILE_END_OF_FILE_INFO);
 	}
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
 	if (rc) {
@@ -5037,7 +5053,7 @@ CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon,
 	else
 		pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_BASIC_INFO);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	memcpy(data_offset, data, sizeof(FILE_BASIC_INFO));
 	rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
@@ -5096,7 +5112,7 @@ CIFSSMBSetFileDisposition(const int xid, struct cifsTconInfo *tcon,
 	pSMB->Fid = fid;
 	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_DISPOSITION_INFO);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	*data_offset = delete_file ? 1 : 0;
 	rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
@@ -5169,7 +5185,7 @@ SetTimesRetry:
 	else
 		pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_BASIC_INFO);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	memcpy(data_offset, data, sizeof(FILE_BASIC_INFO));
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -5221,7 +5237,7 @@ SetAttrLgcyRetry:
 	}
 	pSMB->attr = cpu_to_le16(dos_attrs);
 	pSMB->BufferFormat = 0x04;
-	pSMB->hdr.smb_buf_length += name_len + 1;
+	inc_rfc1001_len(pSMB, name_len + 1);
 	pSMB->ByteCount = cpu_to_le16(name_len + 1);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -5247,7 +5263,7 @@ cifs_fill_unix_set_info(FILE_UNIX_BASIC_INFO *data_offset,
 	 * Samba server ignores set of file size to zero due to bugs in some
 	 * older clients, but we should be precise - we use SetFileSize to
 	 * set file size and do not want to truncate file size to zero
-	 * accidently as happened on one Samba server beta by putting
+	 * accidentally as happened on one Samba server beta by putting
 	 * zero instead of -1 here
 	 */
 	data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
@@ -5326,7 +5342,7 @@ CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon,
 	pSMB->Fid = fid;
 	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	cifs_fill_unix_set_info(data_offset, args);
@@ -5402,7 +5418,7 @@ setPermsRetry:
 	pSMB->TotalDataCount = pSMB->DataCount;
 	pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 
 	cifs_fill_unix_set_info(data_offset, args);
 
@@ -5418,79 +5434,6 @@ setPermsRetry:
 	return rc;
 }
 
-int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon,
-		  const int notify_subdirs, const __u16 netfid,
-		  __u32 filter, struct file *pfile, int multishot,
-		  const struct nls_table *nls_codepage)
-{
-	int rc = 0;
-	struct smb_com_transaction_change_notify_req *pSMB = NULL;
-	struct smb_com_ntransaction_change_notify_rsp *pSMBr = NULL;
-	struct dir_notify_req *dnotify_req;
-	int bytes_returned;
-
-	cFYI(1, "In CIFSSMBNotify for file handle %d", (int)netfid);
-	rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, (void **) &pSMB,
-		      (void **) &pSMBr);
-	if (rc)
-		return rc;
-
-	pSMB->TotalParameterCount = 0 ;
-	pSMB->TotalDataCount = 0;
-	pSMB->MaxParameterCount = cpu_to_le32(2);
-	/* BB find exact data count max from sess structure BB */
-	pSMB->MaxDataCount = 0; /* same in little endian or be */
-/* BB VERIFY verify which is correct for above BB */
-	pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
-					     MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
-
-	pSMB->MaxSetupCount = 4;
-	pSMB->Reserved = 0;
-	pSMB->ParameterOffset = 0;
-	pSMB->DataCount = 0;
-	pSMB->DataOffset = 0;
-	pSMB->SetupCount = 4; /* single byte does not need le conversion */
-	pSMB->SubCommand = cpu_to_le16(NT_TRANSACT_NOTIFY_CHANGE);
-	pSMB->ParameterCount = pSMB->TotalParameterCount;
-	if (notify_subdirs)
-		pSMB->WatchTree = 1; /* one byte - no le conversion needed */
-	pSMB->Reserved2 = 0;
-	pSMB->CompletionFilter = cpu_to_le32(filter);
-	pSMB->Fid = netfid; /* file handle always le */
-	pSMB->ByteCount = 0;
-
-	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-			 (struct smb_hdr *)pSMBr, &bytes_returned,
-			 CIFS_ASYNC_OP);
-	if (rc) {
-		cFYI(1, "Error in Notify = %d", rc);
-	} else {
-		/* Add file to outstanding requests */
-		/* BB change to kmem cache alloc */
-		dnotify_req = kmalloc(
-						sizeof(struct dir_notify_req),
-						 GFP_KERNEL);
-		if (dnotify_req) {
-			dnotify_req->Pid = pSMB->hdr.Pid;
-			dnotify_req->PidHigh = pSMB->hdr.PidHigh;
-			dnotify_req->Mid = pSMB->hdr.Mid;
-			dnotify_req->Tid = pSMB->hdr.Tid;
-			dnotify_req->Uid = pSMB->hdr.Uid;
-			dnotify_req->netfid = netfid;
-			dnotify_req->pfile = pfile;
-			dnotify_req->filter = filter;
-			dnotify_req->multishot = multishot;
-			spin_lock(&GlobalMid_Lock);
-			list_add_tail(&dnotify_req->lhead,
-					&GlobalDnotifyReqList);
-			spin_unlock(&GlobalMid_Lock);
-		} else
-			rc = -ENOMEM;
-	}
-	cifs_buf_release(pSMB);
-	return rc;
-}
-
 #ifdef CONFIG_CIFS_XATTR
 /*
  * Do a path-based QUERY_ALL_EAS call and parse the result. This is a common
@@ -5560,7 +5503,7 @@ QAllEAsRetry:
 	pSMB->ParameterCount = pSMB->TotalParameterCount;
 	pSMB->InformationLevel = cpu_to_le16(SMB_INFO_QUERY_ALL_EAS);
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
@@ -5576,7 +5519,7 @@ QAllEAsRetry:
 	of these trans2 responses */
 
 	rc = validate_t2((struct smb_t2_rsp *)pSMBr);
-	if (rc || (pSMBr->ByteCount < 4)) {
+	if (rc || get_bcc(&pSMBr->hdr) < 4) {
 		rc = -EIO;	/* bad smb */
 		goto QAllEAsOut;
 	}
@@ -5773,7 +5716,7 @@ SetEARetry:
 	pSMB->ParameterCount = cpu_to_le16(params);
 	pSMB->TotalParameterCount = pSMB->ParameterCount;
 	pSMB->Reserved4 = 0;
-	pSMB->hdr.smb_buf_length += byte_count;
+	inc_rfc1001_len(pSMB, byte_count);
 	pSMB->ByteCount = cpu_to_le16(byte_count);
 	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, 0);
@@ -5787,5 +5730,99 @@ SetEARetry:
 
 	return rc;
 }
-
 #endif
+
+#ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* BB unused temporarily */
+/*
+ *	Years ago the kernel added a "dnotify" function for Samba server,
+ *	to allow network clients (such as Windows) to display updated
+ *	lists of files in directory listings automatically when
+ *	files are added by one user when another user has the
+ *	same directory open on their desktop.  The Linux cifs kernel
+ *	client hooked into the kernel side of this interface for
+ *	the same reason, but ironically when the VFS moved from
+ *	"dnotify" to "inotify" it became harder to plug in Linux
+ *	network file system clients (the most obvious use case
+ *	for notify interfaces is when multiple users can update
+ *	the contents of the same directory - exactly what network
+ *	file systems can do) although the server (Samba) could
+ *	still use it.  For the short term we leave the worker
+ *	function ifdeffed out (below) until inotify is fixed
+ *	in the VFS to make it easier to plug in network file
+ *	system clients.  If inotify turns out to be permanently
+ *	incompatible for network fs clients, we could instead simply
+ *	expose this config flag by adding a future cifs (and smb2) notify ioctl.
+ */
+int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon,
+		  const int notify_subdirs, const __u16 netfid,
+		  __u32 filter, struct file *pfile, int multishot,
+		  const struct nls_table *nls_codepage)
+{
+	int rc = 0;
+	struct smb_com_transaction_change_notify_req *pSMB = NULL;
+	struct smb_com_ntransaction_change_notify_rsp *pSMBr = NULL;
+	struct dir_notify_req *dnotify_req;
+	int bytes_returned;
+
+	cFYI(1, "In CIFSSMBNotify for file handle %d", (int)netfid);
+	rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, (void **) &pSMB,
+		      (void **) &pSMBr);
+	if (rc)
+		return rc;
+
+	pSMB->TotalParameterCount = 0 ;
+	pSMB->TotalDataCount = 0;
+	pSMB->MaxParameterCount = cpu_to_le32(2);
+	/* BB find exact data count max from sess structure BB */
+	pSMB->MaxDataCount = 0; /* same in little endian or be */
+/* BB VERIFY verify which is correct for above BB */
+	pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
+					     MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+
+	pSMB->MaxSetupCount = 4;
+	pSMB->Reserved = 0;
+	pSMB->ParameterOffset = 0;
+	pSMB->DataCount = 0;
+	pSMB->DataOffset = 0;
+	pSMB->SetupCount = 4; /* single byte does not need le conversion */
+	pSMB->SubCommand = cpu_to_le16(NT_TRANSACT_NOTIFY_CHANGE);
+	pSMB->ParameterCount = pSMB->TotalParameterCount;
+	if (notify_subdirs)
+		pSMB->WatchTree = 1; /* one byte - no le conversion needed */
+	pSMB->Reserved2 = 0;
+	pSMB->CompletionFilter = cpu_to_le32(filter);
+	pSMB->Fid = netfid; /* file handle always le */
+	pSMB->ByteCount = 0;
+
+	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
+			 (struct smb_hdr *)pSMBr, &bytes_returned,
+			 CIFS_ASYNC_OP);
+	if (rc) {
+		cFYI(1, "Error in Notify = %d", rc);
+	} else {
+		/* Add file to outstanding requests */
+		/* BB change to kmem cache alloc */
+		dnotify_req = kmalloc(
+						sizeof(struct dir_notify_req),
+						 GFP_KERNEL);
+		if (dnotify_req) {
+			dnotify_req->Pid = pSMB->hdr.Pid;
+			dnotify_req->PidHigh = pSMB->hdr.PidHigh;
+			dnotify_req->Mid = pSMB->hdr.Mid;
+			dnotify_req->Tid = pSMB->hdr.Tid;
+			dnotify_req->Uid = pSMB->hdr.Uid;
+			dnotify_req->netfid = netfid;
+			dnotify_req->pfile = pfile;
+			dnotify_req->filter = filter;
+			dnotify_req->multishot = multishot;
+			spin_lock(&GlobalMid_Lock);
+			list_add_tail(&dnotify_req->lhead,
+					&GlobalDnotifyReqList);
+			spin_unlock(&GlobalMid_Lock);
+		} else
+			rc = -ENOMEM;
+	}
+	cifs_buf_release(pSMB);
+	return rc;
+}
+#endif /* was needed for dnotify, and will be needed for inotify when VFS fix */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 8d6c17ab593..da284e3cb65 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -102,6 +102,7 @@ struct smb_vol {
 	bool fsc:1;	/* enable fscache */
 	bool mfsymlinks:1; /* use Minshall+French Symlinks */
 	bool multiuser:1;
+	bool use_smb2:1; /* force smb2 use on mount instead of cifs */
 	unsigned int rsize;
 	unsigned int wsize;
 	bool sockopt_tcp_nodelay:1;
@@ -199,8 +200,7 @@ cifs_reconnect(struct TCP_Server_Info *server)
 	}
 	spin_unlock(&GlobalMid_Lock);
 
-	while ((server->tcpStatus != CifsExiting) &&
-	       (server->tcpStatus != CifsGood)) {
+	while (server->tcpStatus == CifsNeedReconnect) {
 		try_to_freeze();
 
 		/* we should try only the port we connected to before */
@@ -212,7 +212,7 @@ cifs_reconnect(struct TCP_Server_Info *server)
 			atomic_inc(&tcpSesReconnectCount);
 			spin_lock(&GlobalMid_Lock);
 			if (server->tcpStatus != CifsExiting)
-				server->tcpStatus = CifsGood;
+				server->tcpStatus = CifsNeedNegotiate;
 			spin_unlock(&GlobalMid_Lock);
 		}
 	}
@@ -248,24 +248,24 @@ static int check2ndT2(struct smb_hdr *pSMB, unsigned int maxBufSize)
 	total_data_size = get_unaligned_le16(&pSMBt->t2_rsp.TotalDataCount);
 	data_in_this_rsp = get_unaligned_le16(&pSMBt->t2_rsp.DataCount);
 
-	remaining = total_data_size - data_in_this_rsp;
-
-	if (remaining == 0)
+	if (total_data_size == data_in_this_rsp)
 		return 0;
-	else if (remaining < 0) {
+	else if (total_data_size < data_in_this_rsp) {
 		cFYI(1, "total data %d smaller than data in frame %d",
 			total_data_size, data_in_this_rsp);
 		return -EINVAL;
-	} else {
-		cFYI(1, "missing %d bytes from transact2, check next response",
-			remaining);
-		if (total_data_size > maxBufSize) {
-			cERROR(1, "TotalDataSize %d is over maximum buffer %d",
-				total_data_size, maxBufSize);
-			return -EINVAL;
-		}
-		return remaining;
 	}
+
+	remaining = total_data_size - data_in_this_rsp;
+
+	cFYI(1, "missing %d bytes from transact2, check next response",
+		remaining);
+	if (total_data_size > maxBufSize) {
+		cERROR(1, "TotalDataSize %d is over maximum buffer %d",
+			total_data_size, maxBufSize);
+		return -EINVAL;
+	}
+	return remaining;
 }
 
 static int coalesce_t2(struct smb_hdr *psecond, struct smb_hdr *pTargetSMB)
@@ -275,7 +275,8 @@ static int coalesce_t2(struct smb_hdr *psecond, struct smb_hdr *pTargetSMB)
 	char *data_area_of_target;
 	char *data_area_of_buf2;
 	int remaining;
-	__u16 byte_count, total_data_size, total_in_buf, total_in_buf2;
+	unsigned int byte_count, total_in_buf;
+	__u16 total_data_size, total_in_buf2;
 
 	total_data_size = get_unaligned_le16(&pSMBt->t2_rsp.TotalDataCount);
 
@@ -288,7 +289,7 @@ static int coalesce_t2(struct smb_hdr *psecond, struct smb_hdr *pTargetSMB)
 	remaining = total_data_size - total_in_buf;
 
 	if (remaining < 0)
-		return -EINVAL;
+		return -EPROTO;
 
 	if (remaining == 0) /* nothing to do, ignore */
 		return 0;
@@ -309,19 +310,28 @@ static int coalesce_t2(struct smb_hdr *psecond, struct smb_hdr *pTargetSMB)
 	data_area_of_target += total_in_buf;
 
 	/* copy second buffer into end of first buffer */
-	memcpy(data_area_of_target, data_area_of_buf2, total_in_buf2);
 	total_in_buf += total_in_buf2;
+	/* is the result too big for the field? */
+	if (total_in_buf > USHRT_MAX)
+		return -EPROTO;
 	put_unaligned_le16(total_in_buf, &pSMBt->t2_rsp.DataCount);
-	byte_count = get_bcc_le(pTargetSMB);
-	byte_count += total_in_buf2;
-	put_bcc_le(byte_count, pTargetSMB);
 
-	byte_count = pTargetSMB->smb_buf_length;
+	/* fix up the BCC */
+	byte_count = get_bcc(pTargetSMB);
 	byte_count += total_in_buf2;
+	/* is the result too big for the field? */
+	if (byte_count > USHRT_MAX)
+		return -EPROTO;
+	put_bcc(byte_count, pTargetSMB);
 
-	/* BB also add check that we are not beyond maximum buffer size */
+	byte_count = be32_to_cpu(pTargetSMB->smb_buf_length);
+	byte_count += total_in_buf2;
+	/* don't allow buffer to overflow */
+	if (byte_count > CIFSMaxBufSize)
+		return -ENOBUFS;
+	pTargetSMB->smb_buf_length = cpu_to_be32(byte_count);
 
-	pTargetSMB->smb_buf_length = byte_count;
+	memcpy(data_area_of_target, data_area_of_buf2, total_in_buf2);
 
 	if (remaining == total_in_buf2) {
 		cFYI(1, "found the last secondary response");
@@ -421,7 +431,7 @@ cifs_demultiplex_thread(struct TCP_Server_Info *server)
 		pdu_length = 4; /* enough to get RFC1001 header */
 
 incomplete_rcv:
-		if (echo_retries > 0 &&
+		if (echo_retries > 0 && server->tcpStatus == CifsGood &&
 		    time_after(jiffies, server->lstrp +
 					(echo_retries * SMB_ECHO_INTERVAL))) {
 			cERROR(1, "Server %s has not responded in %d seconds. "
@@ -486,8 +496,7 @@ incomplete_rcv:
 		/* Note that FC 1001 length is big endian on the wire,
 		but we convert it here so it is always manipulated
 		as host byte order */
-		pdu_length = be32_to_cpu((__force __be32)smb_buffer->smb_buf_length);
-		smb_buffer->smb_buf_length = pdu_length;
+		pdu_length = be32_to_cpu(smb_buffer->smb_buf_length);
 
 		cFYI(1, "rfc1002 length 0x%x", pdu_length+4);
 
@@ -608,59 +617,63 @@ incomplete_rcv:
 		list_for_each_safe(tmp, tmp2, &server->pending_mid_q) {
 			mid_entry = list_entry(tmp, struct mid_q_entry, qhead);
 
-			if ((mid_entry->mid == smb_buffer->Mid) &&
-			    (mid_entry->midState == MID_REQUEST_SUBMITTED) &&
-			    (mid_entry->command == smb_buffer->Command)) {
-				if (length == 0 &&
-				   check2ndT2(smb_buffer, server->maxBuf) > 0) {
-					/* We have a multipart transact2 resp */
-					isMultiRsp = true;
-					if (mid_entry->resp_buf) {
-						/* merge response - fix up 1st*/
-						if (coalesce_t2(smb_buffer,
-							mid_entry->resp_buf)) {
-							mid_entry->multiRsp =
-								 true;
-							break;
-						} else {
-							/* all parts received */
-							mid_entry->multiEnd =
-								 true;
-							goto multi_t2_fnd;
-						}
+			if (mid_entry->mid != smb_buffer->Mid ||
+			    mid_entry->midState != MID_REQUEST_SUBMITTED ||
+			    mid_entry->command != smb_buffer->Command) {
+				mid_entry = NULL;
+				continue;
+			}
+
+			if (length == 0 &&
+			    check2ndT2(smb_buffer, server->maxBuf) > 0) {
+				/* We have a multipart transact2 resp */
+				isMultiRsp = true;
+				if (mid_entry->resp_buf) {
+					/* merge response - fix up 1st*/
+					length = coalesce_t2(smb_buffer,
+							mid_entry->resp_buf);
+					if (length > 0) {
+						length = 0;
+						mid_entry->multiRsp = true;
+						break;
 					} else {
-						if (!isLargeBuf) {
-							cERROR(1, "1st trans2 resp needs bigbuf");
-					/* BB maybe we can fix this up,  switch
-					   to already allocated large buffer? */
-						} else {
-							/* Have first buffer */
-							mid_entry->resp_buf =
-								 smb_buffer;
-							mid_entry->largeBuf =
-								 true;
-							bigbuf = NULL;
-						}
+						/* all parts received or
+						 * packet is malformed
+						 */
+						mid_entry->multiEnd = true;
+						goto multi_t2_fnd;
+					}
+				} else {
+					if (!isLargeBuf) {
+						/*
+						 * FIXME: switch to already
+						 *        allocated largebuf?
+						 */
+						cERROR(1, "1st trans2 resp "
+							  "needs bigbuf");
+					} else {
+						/* Have first buffer */
+						mid_entry->resp_buf =
+							 smb_buffer;
+						mid_entry->largeBuf = true;
+						bigbuf = NULL;
 					}
-					break;
 				}
-				mid_entry->resp_buf = smb_buffer;
-				mid_entry->largeBuf = isLargeBuf;
+				break;
+			}
+			mid_entry->resp_buf = smb_buffer;
+			mid_entry->largeBuf = isLargeBuf;
 multi_t2_fnd:
-				if (length == 0)
-					mid_entry->midState =
-							MID_RESPONSE_RECEIVED;
-				else
-					mid_entry->midState =
-							MID_RESPONSE_MALFORMED;
+			if (length == 0)
+				mid_entry->midState = MID_RESPONSE_RECEIVED;
+			else
+				mid_entry->midState = MID_RESPONSE_MALFORMED;
 #ifdef CONFIG_CIFS_STATS2
-				mid_entry->when_received = jiffies;
+			mid_entry->when_received = jiffies;
 #endif
-				list_del_init(&mid_entry->qhead);
-				mid_entry->callback(mid_entry);
-				break;
-			}
-			mid_entry = NULL;
+			list_del_init(&mid_entry->qhead);
+			mid_entry->callback(mid_entry);
+			break;
 		}
 		spin_unlock(&GlobalMid_Lock);
 
@@ -722,7 +735,7 @@ multi_t2_fnd:
 		sock_release(csocket);
 		server->ssocket = NULL;
 	}
-	/* buffer usuallly freed in free_mid - need to free it here on exit */
+	/* buffer usually freed in free_mid - need to free it here on exit */
 	cifs_buf_release(bigbuf);
 	if (smallbuf) /* no sense logging a debug message if NULL */
 		cifs_small_buf_release(smallbuf);
@@ -805,11 +818,11 @@ extract_hostname(const char *unc)
 }
 
 static int
-cifs_parse_mount_options(char *options, const char *devname,
+cifs_parse_mount_options(const char *mountdata, const char *devname,
 			 struct smb_vol *vol)
 {
-	char *value;
-	char *data;
+	char *value, *data, *end;
+	char *mountdata_copy, *options;
 	unsigned int  temp_len, i, j;
 	char separator[2];
 	short int override_uid = -1;
@@ -849,9 +862,15 @@ cifs_parse_mount_options(char *options, const char *devname,
 
 	vol->actimeo = CIFS_DEF_ACTIMEO;
 
-	if (!options)
-		return 1;
+	if (!mountdata)
+		goto cifs_parse_mount_err;
+
+	mountdata_copy = kstrndup(mountdata, PAGE_SIZE, GFP_KERNEL);
+	if (!mountdata_copy)
+		goto cifs_parse_mount_err;
 
+	options = mountdata_copy;
+	end = options + strlen(options);
 	if (strncmp(options, "sep=", 4) == 0) {
 		if (options[4] != 0) {
 			separator[0] = options[4];
@@ -876,16 +895,22 @@ cifs_parse_mount_options(char *options, const char *devname,
 			if (!value) {
 				printk(KERN_WARNING
 				       "CIFS: invalid or missing username\n");
-				return 1;	/* needs_arg; */
+				goto cifs_parse_mount_err;
 			} else if (!*value) {
 				/* null user, ie anonymous, authentication */
 				vol->nullauth = 1;
 			}
-			if (strnlen(value, 200) < 200) {
-				vol->username = value;
+			if (strnlen(value, MAX_USERNAME_SIZE) <
+						MAX_USERNAME_SIZE) {
+				vol->username = kstrdup(value, GFP_KERNEL);
+				if (!vol->username) {
+					printk(KERN_WARNING "CIFS: no memory "
+							    "for username\n");
+					goto cifs_parse_mount_err;
+				}
 			} else {
 				printk(KERN_WARNING "CIFS: username too long\n");
-				return 1;
+				goto cifs_parse_mount_err;
 			}
 		} else if (strnicmp(data, "pass", 4) == 0) {
 			if (!value) {
@@ -916,6 +941,7 @@ cifs_parse_mount_options(char *options, const char *devname,
 			the only illegal character in a password is null */
 
 			if ((value[temp_len] == 0) &&
+			    (value + temp_len < end) &&
 			    (value[temp_len+1] == separator[0])) {
 				/* reinsert comma */
 				value[temp_len] = separator[0];
@@ -948,7 +974,7 @@ cifs_parse_mount_options(char *options, const char *devname,
 				if (vol->password == NULL) {
 					printk(KERN_WARNING "CIFS: no memory "
 							    "for password\n");
-					return 1;
+					goto cifs_parse_mount_err;
 				}
 				for (i = 0, j = 0; i < temp_len; i++, j++) {
 					vol->password[j] = value[i];
@@ -964,7 +990,7 @@ cifs_parse_mount_options(char *options, const char *devname,
 				if (vol->password == NULL) {
 					printk(KERN_WARNING "CIFS: no memory "
 							    "for password\n");
-					return 1;
+					goto cifs_parse_mount_err;
 				}
 				strcpy(vol->password, value);
 			}
@@ -974,11 +1000,16 @@ cifs_parse_mount_options(char *options, const char *devname,
 				vol->UNCip = NULL;
 			} else if (strnlen(value, INET6_ADDRSTRLEN) <
 							INET6_ADDRSTRLEN) {
-				vol->UNCip = value;
+				vol->UNCip = kstrdup(value, GFP_KERNEL);
+				if (!vol->UNCip) {
+					printk(KERN_WARNING "CIFS: no memory "
+							    "for UNC IP\n");
+					goto cifs_parse_mount_err;
+				}
 			} else {
 				printk(KERN_WARNING "CIFS: ip address "
 						    "too long\n");
-				return 1;
+				goto cifs_parse_mount_err;
 			}
 		} else if (strnicmp(data, "sec", 3) == 0) {
 			if (!value || !*value) {
@@ -991,7 +1022,7 @@ cifs_parse_mount_options(char *options, const char *devname,
 				/* vol->secFlg |= CIFSSEC_MUST_SEAL |
 					CIFSSEC_MAY_KRB5; */
 				cERROR(1, "Krb5 cifs privacy not supported");
-				return 1;
+				goto cifs_parse_mount_err;
 			} else if (strnicmp(value, "krb5", 4) == 0) {
 				vol->secFlg |= CIFSSEC_MAY_KRB5;
 			} else if (strnicmp(value, "ntlmsspi", 8) == 0) {
@@ -1021,7 +1052,23 @@ cifs_parse_mount_options(char *options, const char *devname,
 				vol->nullauth = 1;
 			} else {
 				cERROR(1, "bad security option: %s", value);
-				return 1;
+				goto cifs_parse_mount_err;
+			}
+		} else if (strnicmp(data, "vers", 3) == 0) {
+			if (!value || !*value) {
+				cERROR(1, "no protocol version specified"
+					  " after vers= mount option");
+			} else if ((strnicmp(value, "cifs", 4) == 0) ||
+				   (strnicmp(value, "1", 1) == 0)) {
+				/* this is the default */
+				continue;
+			} else if ((strnicmp(value, "smb2", 4) == 0) ||
+				   (strnicmp(value, "2", 1) == 0)) {
+#ifdef CONFIG_CIFS_SMB2
+				vol->use_smb2 = true;
+#else
+				cERROR(1, "smb2 support not enabled");
+#endif /* CONFIG_CIFS_SMB2 */
 			}
 		} else if ((strnicmp(data, "unc", 3) == 0)
 			   || (strnicmp(data, "target", 6) == 0)
@@ -1029,12 +1076,12 @@ cifs_parse_mount_options(char *options, const char *devname,
 			if (!value || !*value) {
 				printk(KERN_WARNING "CIFS: invalid path to "
 						    "network resource\n");
-				return 1;	/* needs_arg; */
+				goto cifs_parse_mount_err;
 			}
 			if ((temp_len = strnlen(value, 300)) < 300) {
 				vol->UNC = kmalloc(temp_len+1, GFP_KERNEL);
 				if (vol->UNC == NULL)
-					return 1;
+					goto cifs_parse_mount_err;
 				strcpy(vol->UNC, value);
 				if (strncmp(vol->UNC, "//", 2) == 0) {
 					vol->UNC[0] = '\\';
@@ -1043,27 +1090,32 @@ cifs_parse_mount_options(char *options, const char *devname,
 					printk(KERN_WARNING
 					       "CIFS: UNC Path does not begin "
 					       "with // or \\\\ \n");
-					return 1;
+					goto cifs_parse_mount_err;
 				}
 			} else {
 				printk(KERN_WARNING "CIFS: UNC name too long\n");
-				return 1;
+				goto cifs_parse_mount_err;
 			}
 		} else if ((strnicmp(data, "domain", 3) == 0)
 			   || (strnicmp(data, "workgroup", 5) == 0)) {
 			if (!value || !*value) {
 				printk(KERN_WARNING "CIFS: invalid domain name\n");
-				return 1;	/* needs_arg; */
+				goto cifs_parse_mount_err;
 			}
 			/* BB are there cases in which a comma can be valid in
 			a domain name and need special handling? */
 			if (strnlen(value, 256) < 256) {
-				vol->domainname = value;
+				vol->domainname = kstrdup(value, GFP_KERNEL);
+				if (!vol->domainname) {
+					printk(KERN_WARNING "CIFS: no memory "
+							    "for domainname\n");
+					goto cifs_parse_mount_err;
+				}
 				cFYI(1, "Domain name set");
 			} else {
 				printk(KERN_WARNING "CIFS: domain name too "
 						    "long\n");
-				return 1;
+				goto cifs_parse_mount_err;
 			}
 		} else if (strnicmp(data, "srcaddr", 7) == 0) {
 			vol->srcaddr.ss_family = AF_UNSPEC;
@@ -1071,7 +1123,7 @@ cifs_parse_mount_options(char *options, const char *devname,
 			if (!value || !*value) {
 				printk(KERN_WARNING "CIFS: srcaddr value"
 				       " not specified.\n");
-				return 1;	/* needs_arg; */
+				goto cifs_parse_mount_err;
 			}
 			i = cifs_convert_address((struct sockaddr *)&vol->srcaddr,
 						 value, strlen(value));
@@ -1079,20 +1131,20 @@ cifs_parse_mount_options(char *options, const char *devname,
 				printk(KERN_WARNING "CIFS:  Could not parse"
 				       " srcaddr: %s\n",
 				       value);
-				return 1;
+				goto cifs_parse_mount_err;
 			}
 		} else if (strnicmp(data, "prefixpath", 10) == 0) {
 			if (!value || !*value) {
 				printk(KERN_WARNING
 					"CIFS: invalid path prefix\n");
-				return 1;       /* needs_argument */
+				goto cifs_parse_mount_err;
 			}
 			if ((temp_len = strnlen(value, 1024)) < 1024) {
 				if (value[0] != '/')
 					temp_len++;  /* missing leading slash */
 				vol->prepath = kmalloc(temp_len+1, GFP_KERNEL);
 				if (vol->prepath == NULL)
-					return 1;
+					goto cifs_parse_mount_err;
 				if (value[0] != '/') {
 					vol->prepath[0] = '/';
 					strcpy(vol->prepath+1, value);
@@ -1101,24 +1153,33 @@ cifs_parse_mount_options(char *options, const char *devname,
 				cFYI(1, "prefix path %s", vol->prepath);
 			} else {
 				printk(KERN_WARNING "CIFS: prefix too long\n");
-				return 1;
+				goto cifs_parse_mount_err;
 			}
 		} else if (strnicmp(data, "iocharset", 9) == 0) {
 			if (!value || !*value) {
 				printk(KERN_WARNING "CIFS: invalid iocharset "
 						    "specified\n");
-				return 1;	/* needs_arg; */
+				goto cifs_parse_mount_err;
 			}
 			if (strnlen(value, 65) < 65) {
-				if (strnicmp(value, "default", 7))
-					vol->iocharset = value;
+				if (strnicmp(value, "default", 7)) {
+					vol->iocharset = kstrdup(value,
+								 GFP_KERNEL);
+
+					if (!vol->iocharset) {
+						printk(KERN_WARNING "CIFS: no "
+								   "memory for"
+								   "charset\n");
+						goto cifs_parse_mount_err;
+					}
+				}
 				/* if iocharset not set then load_nls_default
 				   is used by caller */
 				cFYI(1, "iocharset set to %s", value);
 			} else {
 				printk(KERN_WARNING "CIFS: iocharset name "
 						    "too long.\n");
-				return 1;
+				goto cifs_parse_mount_err;
 			}
 		} else if (!strnicmp(data, "uid", 3) && value && *value) {
 			vol->linux_uid = simple_strtoul(value, &value, 0);
@@ -1231,7 +1292,7 @@ cifs_parse_mount_options(char *options, const char *devname,
 				if (vol->actimeo > CIFS_MAX_ACTIMEO) {
 					cERROR(1, "CIFS: attribute cache"
 							"timeout too large");
-					return 1;
+					goto cifs_parse_mount_err;
 				}
 			}
 		} else if (strnicmp(data, "credentials", 4) == 0) {
@@ -1375,7 +1436,7 @@ cifs_parse_mount_options(char *options, const char *devname,
 #ifndef CONFIG_CIFS_FSCACHE
 			cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE"
 				  "kernel config option set");
-			return 1;
+			goto cifs_parse_mount_err;
 #endif
 			vol->fsc = true;
 		} else if (strnicmp(data, "mfsymlinks", 10) == 0) {
@@ -1390,12 +1451,12 @@ cifs_parse_mount_options(char *options, const char *devname,
 		if (devname == NULL) {
 			printk(KERN_WARNING "CIFS: Missing UNC name for mount "
 						"target\n");
-			return 1;
+			goto cifs_parse_mount_err;
 		}
 		if ((temp_len = strnlen(devname, 300)) < 300) {
 			vol->UNC = kmalloc(temp_len+1, GFP_KERNEL);
 			if (vol->UNC == NULL)
-				return 1;
+				goto cifs_parse_mount_err;
 			strcpy(vol->UNC, devname);
 			if (strncmp(vol->UNC, "//", 2) == 0) {
 				vol->UNC[0] = '\\';
@@ -1403,21 +1464,21 @@ cifs_parse_mount_options(char *options, const char *devname,
 			} else if (strncmp(vol->UNC, "\\\\", 2) != 0) {
 				printk(KERN_WARNING "CIFS: UNC Path does not "
 						    "begin with // or \\\\ \n");
-				return 1;
+				goto cifs_parse_mount_err;
 			}
 			value = strpbrk(vol->UNC+2, "/\\");
 			if (value)
 				*value = '\\';
 		} else {
 			printk(KERN_WARNING "CIFS: UNC name too long\n");
-			return 1;
+			goto cifs_parse_mount_err;
 		}
 	}
 
 	if (vol->multiuser && !(vol->secFlg & CIFSSEC_MAY_KRB5)) {
 		cERROR(1, "Multiuser mounts currently require krb5 "
 			  "authentication!");
-		return 1;
+		goto cifs_parse_mount_err;
 	}
 
 	if (vol->UNCip == NULL)
@@ -1435,7 +1496,12 @@ cifs_parse_mount_options(char *options, const char *devname,
 		printk(KERN_NOTICE "CIFS: ignoring forcegid mount option "
 				   "specified with no gid= option.\n");
 
+	kfree(mountdata_copy);
 	return 0;
+
+cifs_parse_mount_err:
+	kfree(mountdata_copy);
+	return 1;
 }
 
 /** Returns true if srcaddr isn't specified and rhs isn't
@@ -1472,7 +1538,7 @@ srcip_matches(struct sockaddr *srcaddr, struct sockaddr *rhs)
 static bool
 match_port(struct TCP_Server_Info *server, struct sockaddr *addr)
 {
-	unsigned short int port, *sport;
+	__be16 port, *sport;
 
 	switch (addr->sa_family) {
 	case AF_INET:
@@ -1572,7 +1638,7 @@ match_security(struct TCP_Server_Info *server, struct smb_vol *vol)
 		return false;
 	}
 
-	/* now check if signing mode is acceptible */
+	/* now check if signing mode is acceptable */
 	if ((secFlags & CIFSSEC_MAY_SIGN) == 0 &&
 	    (server->secMode & SECMODE_SIGN_REQUIRED))
 			return false;
@@ -1765,6 +1831,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 		module_put(THIS_MODULE);
 		goto out_err_crypto_release;
 	}
+	tcp_ses->tcpStatus = CifsNeedNegotiate;
 
 	/* thread spawned, put it on the list */
 	spin_lock(&cifs_tcp_ses_lock);
@@ -1808,7 +1875,9 @@ cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol)
 			break;
 		default:
 			/* anything else takes username/password */
-			if (strncmp(ses->userName, vol->username,
+			if (ses->user_name == NULL)
+				continue;
+			if (strncmp(ses->user_name, vol->username,
 				    MAX_USERNAME_SIZE))
 				continue;
 			if (strlen(vol->username) != 0 &&
@@ -1851,6 +1920,8 @@ cifs_put_smb_ses(struct cifsSesInfo *ses)
 	cifs_put_tcp_session(server);
 }
 
+static bool warned_on_ntlm;  /* globals init to false automatically */
+
 static struct cifsSesInfo *
 cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info)
 {
@@ -1906,9 +1977,11 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info)
 	else
 		sprintf(ses->serverName, "%pI4", &addr->sin_addr);
 
-	if (volume_info->username)
-		strncpy(ses->userName, volume_info->username,
-			MAX_USERNAME_SIZE);
+	if (volume_info->username) {
+		ses->user_name = kstrdup(volume_info->username, GFP_KERNEL);
+		if (!ses->user_name)
+			goto get_ses_fail;
+	}
 
 	/* volume_info->password freed at unmount */
 	if (volume_info->password) {
@@ -1923,6 +1996,15 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info)
 	}
 	ses->cred_uid = volume_info->cred_uid;
 	ses->linux_uid = volume_info->linux_uid;
+
+	/* ntlmv2 is much stronger than ntlm security, and has been broadly
+	supported for many years, time to update default security mechanism */
+	if ((volume_info->secFlg == 0) && warned_on_ntlm == false) {
+		warned_on_ntlm = true;
+		cERROR(1, "default security mechanism requested.  The default "
+			"security mechanism will be upgraded from ntlm to "
+			"ntlmv2 in kernel release 2.6.41");
+	}
 	ses->overrideSecFlg = volume_info->secFlg;
 
 	mutex_lock(&ses->session_mutex);
@@ -2249,7 +2331,7 @@ ip_rfc1001_connect(struct TCP_Server_Info *server)
 		smb_buf = (struct smb_hdr *)ses_init_buf;
 
 		/* sizeof RFC1002_SESSION_REQUEST with no scope */
-		smb_buf->smb_buf_length = 0x81000044;
+		smb_buf->smb_buf_length = cpu_to_be32(0x81000044);
 		rc = smb_send(server, smb_buf, 0x44);
 		kfree(ses_init_buf);
 		/*
@@ -2276,7 +2358,7 @@ static int
 generic_ip_connect(struct TCP_Server_Info *server)
 {
 	int rc = 0;
-	unsigned short int sport;
+	__be16 sport;
 	int slen, sfamily;
 	struct socket *socket = server->ssocket;
 	struct sockaddr *saddr;
@@ -2361,7 +2443,7 @@ generic_ip_connect(struct TCP_Server_Info *server)
 static int
 ip_connect(struct TCP_Server_Info *server)
 {
-	unsigned short int *sport;
+	__be16 *sport;
 	struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *)&server->dstaddr;
 	struct sockaddr_in *addr = (struct sockaddr_in *)&server->dstaddr;
 
@@ -2642,6 +2724,11 @@ is_path_accessible(int xid, struct cifsTconInfo *tcon,
 			      0 /* not legacy */, cifs_sb->local_nls,
 			      cifs_sb->mnt_cifs_flags &
 				CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+	if (rc == -EOPNOTSUPP || rc == -EINVAL)
+		rc = SMBQueryInformation(xid, tcon, full_path, pfile_info,
+				cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
+				  CIFS_MOUNT_MAP_SPECIAL_CHR);
 	kfree(pfile_info);
 	return rc;
 }
@@ -2655,8 +2742,12 @@ cleanup_volume_info(struct smb_vol **pvolume_info)
 		return;
 
 	volume_info = *pvolume_info;
+	kfree(volume_info->username);
 	kzfree(volume_info->password);
 	kfree(volume_info->UNC);
+	kfree(volume_info->UNCip);
+	kfree(volume_info->domainname);
+	kfree(volume_info->iocharset);
 	kfree(volume_info->prepath);
 	kfree(volume_info);
 	*pvolume_info = NULL;
@@ -2693,11 +2784,65 @@ build_unc_path_to_root(const struct smb_vol *volume_info,
 	full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */
 	return full_path;
 }
+
+/*
+ * Perform a dfs referral query for a share and (optionally) prefix
+ *
+ * If a referral is found, cifs_sb->mountdata will be (re-)allocated
+ * to a string containing updated options for the submount.  Otherwise it
+ * will be left untouched.
+ *
+ * Returns the rc from get_dfs_path to the caller, which can be used to
+ * determine whether there were referrals.
+ */
+static int
+expand_dfs_referral(int xid, struct cifsSesInfo *pSesInfo,
+		    struct smb_vol *volume_info, struct cifs_sb_info *cifs_sb,
+		    int check_prefix)
+{
+	int rc;
+	unsigned int num_referrals = 0;
+	struct dfs_info3_param *referrals = NULL;
+	char *full_path = NULL, *ref_path = NULL, *mdata = NULL;
+
+	full_path = build_unc_path_to_root(volume_info, cifs_sb);
+	if (IS_ERR(full_path))
+		return PTR_ERR(full_path);
+
+	/* For DFS paths, skip the first '\' of the UNC */
+	ref_path = check_prefix ? full_path + 1 : volume_info->UNC + 1;
+
+	rc = get_dfs_path(xid, pSesInfo , ref_path, cifs_sb->local_nls,
+			  &num_referrals, &referrals,
+			  cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+
+	if (!rc && num_referrals > 0) {
+		char *fake_devname = NULL;
+
+		mdata = cifs_compose_mount_options(cifs_sb->mountdata,
+						   full_path + 1, referrals,
+						   &fake_devname);
+
+		free_dfs_info_array(referrals, num_referrals);
+		kfree(fake_devname);
+
+		if (cifs_sb->mountdata != NULL)
+			kfree(cifs_sb->mountdata);
+
+		if (IS_ERR(mdata)) {
+			rc = PTR_ERR(mdata);
+			mdata = NULL;
+		}
+		cifs_sb->mountdata = mdata;
+	}
+	kfree(full_path);
+	return rc;
+}
 #endif
 
 int
 cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
-		char *mount_data_global, const char *devname)
+		const char *devname)
 {
 	int rc;
 	int xid;
@@ -2706,13 +2851,20 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 	struct cifsTconInfo *tcon;
 	struct TCP_Server_Info *srvTcp;
 	char   *full_path;
-	char *mount_data = mount_data_global;
 	struct tcon_link *tlink;
 #ifdef CONFIG_CIFS_DFS_UPCALL
-	struct dfs_info3_param *referrals = NULL;
-	unsigned int num_referrals = 0;
 	int referral_walks_count = 0;
 try_mount_again:
+	/* cleanup activities if we're chasing a referral */
+	if (referral_walks_count) {
+		if (tcon)
+			cifs_put_tcon(tcon);
+		else if (pSesInfo)
+			cifs_put_smb_ses(pSesInfo);
+
+		cleanup_volume_info(&volume_info);
+		FreeXid(xid);
+	}
 #endif
 	rc = 0;
 	tcon = NULL;
@@ -2729,7 +2881,8 @@ try_mount_again:
 		goto out;
 	}
 
-	if (cifs_parse_mount_options(mount_data, devname, volume_info)) {
+	if (cifs_parse_mount_options(cifs_sb->mountdata, devname,
+				     volume_info)) {
 		rc = -EINVAL;
 		goto out;
 	}
@@ -2825,8 +2978,26 @@ try_mount_again:
 			       (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
 
 remote_path_check:
+#ifdef CONFIG_CIFS_DFS_UPCALL
+	/*
+	 * Perform an unconditional check for whether there are DFS
+	 * referrals for this path without prefix, to provide support
+	 * for DFS referrals from w2k8 servers which don't seem to respond
+	 * with PATH_NOT_COVERED to requests that include the prefix.
+	 * Chase the referral if found, otherwise continue normally.
+	 */
+	if (referral_walks_count == 0) {
+		int refrc = expand_dfs_referral(xid, pSesInfo, volume_info,
+						cifs_sb, false);
+		if (!refrc) {
+			referral_walks_count++;
+			goto try_mount_again;
+		}
+	}
+#endif
+
 	/* check if a whole path (including prepath) is not remote */
-	if (!rc && cifs_sb->prepathlen && tcon) {
+	if (!rc && tcon) {
 		/* build_path_to_root works only when we have a valid tcon */
 		full_path = cifs_build_path_to_root(cifs_sb, tcon);
 		if (full_path == NULL) {
@@ -2858,46 +3029,15 @@ remote_path_check:
 		if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
 			convert_delimiter(cifs_sb->prepath,
 					CIFS_DIR_SEP(cifs_sb));
-		full_path = build_unc_path_to_root(volume_info, cifs_sb);
-		if (IS_ERR(full_path)) {
-			rc = PTR_ERR(full_path);
-			goto mount_fail_check;
-		}
-
-		cFYI(1, "Getting referral for: %s", full_path);
-		rc = get_dfs_path(xid, pSesInfo , full_path + 1,
-			cifs_sb->local_nls, &num_referrals, &referrals,
-			cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
-		if (!rc && num_referrals > 0) {
-			char *fake_devname = NULL;
 
-			if (mount_data != mount_data_global)
-				kfree(mount_data);
-
-			mount_data = cifs_compose_mount_options(
-					cifs_sb->mountdata, full_path + 1,
-					referrals, &fake_devname);
-
-			free_dfs_info_array(referrals, num_referrals);
-			kfree(fake_devname);
-			kfree(full_path);
+		rc = expand_dfs_referral(xid, pSesInfo, volume_info, cifs_sb,
+					 true);
 
-			if (IS_ERR(mount_data)) {
-				rc = PTR_ERR(mount_data);
-				mount_data = NULL;
-				goto mount_fail_check;
-			}
-
-			if (tcon)
-				cifs_put_tcon(tcon);
-			else if (pSesInfo)
-				cifs_put_smb_ses(pSesInfo);
-
-			cleanup_volume_info(&volume_info);
+		if (!rc) {
 			referral_walks_count++;
-			FreeXid(xid);
 			goto try_mount_again;
 		}
+		goto mount_fail_check;
 #else /* No DFS support, return error on mount */
 		rc = -EOPNOTSUPP;
 #endif
@@ -2930,10 +3070,8 @@ remote_path_check:
 mount_fail_check:
 	/* on error free sesinfo and tcon struct if needed */
 	if (rc) {
-		if (mount_data != mount_data_global)
-			kfree(mount_data);
 		/* If find_unc succeeded then rc == 0 so we can not end */
-		/* up accidently freeing someone elses tcon struct */
+		/* up accidentally freeing someone elses tcon struct */
 		if (tcon)
 			cifs_put_tcon(tcon);
 		else if (pSesInfo)
@@ -3047,7 +3185,8 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 	bcc_ptr += strlen("?????");
 	bcc_ptr += 1;
 	count = bcc_ptr - &pSMB->Password[0];
-	pSMB->hdr.smb_buf_length += count;
+	pSMB->hdr.smb_buf_length = cpu_to_be32(be32_to_cpu(
+					pSMB->hdr.smb_buf_length) + count);
 	pSMB->ByteCount = cpu_to_le16(count);
 
 	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
@@ -3222,7 +3361,9 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, uid_t fsuid)
 	struct cifsSesInfo *ses;
 	struct cifsTconInfo *tcon = NULL;
 	struct smb_vol *vol_info;
-	char username[MAX_USERNAME_SIZE + 1];
+	char username[28]; /* big enough for "krb50x" + hex of ULONG_MAX 6+16 */
+			   /* We used to have this as MAX_USERNAME which is   */
+			   /* way too big now (256 instead of 32) */
 
 	vol_info = kzalloc(sizeof(*vol_info), GFP_KERNEL);
 	if (vol_info == NULL) {
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index dd5f22918c3..9ea65cf3671 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -189,7 +189,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 			inode->i_sb, mode, oflags, &oplock, &fileHandle, xid);
 		/* EIO could indicate that (posix open) operation is not
 		   supported, despite what server claimed in capability
-		   negotation.  EREMOTE indicates DFS junction, which is not
+		   negotiation.  EREMOTE indicates DFS junction, which is not
 		   handled in posix open */
 
 		if (rc == 0) {
diff --git a/fs/cifs/export.c b/fs/cifs/export.c
index 993f82045bf..55d87ac5200 100644
--- a/fs/cifs/export.c
+++ b/fs/cifs/export.c
@@ -45,7 +45,7 @@
 #include "cifs_debug.h"
 #include "cifsfs.h"
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CIFS_NFSD_EXPORT
 static struct dentry *cifs_get_parent(struct dentry *dentry)
 {
 	/* BB need to add code here eventually to enable export via NFSD */
@@ -63,5 +63,5 @@ const struct export_operations cifs_export_ops = {
 	.encode_fs =  */
 };
 
-#endif /* EXPERIMENTAL */
+#endif /* CIFS_NFSD_EXPORT */
 
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index c27d236738f..c672afef0c0 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -575,8 +575,10 @@ reopen_error_exit:
 
 int cifs_close(struct inode *inode, struct file *file)
 {
-	cifsFileInfo_put(file->private_data);
-	file->private_data = NULL;
+	if (file->private_data != NULL) {
+		cifsFileInfo_put(file->private_data);
+		file->private_data = NULL;
+	}
 
 	/* return code from the ->release op is always ignored */
 	return 0;
@@ -855,95 +857,6 @@ cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
 		cifsi->server_eof = end_of_write;
 }
 
-ssize_t cifs_user_write(struct file *file, const char __user *write_data,
-	size_t write_size, loff_t *poffset)
-{
-	struct inode *inode = file->f_path.dentry->d_inode;
-	int rc = 0;
-	unsigned int bytes_written = 0;
-	unsigned int total_written;
-	struct cifs_sb_info *cifs_sb;
-	struct cifsTconInfo *pTcon;
-	int xid;
-	struct cifsFileInfo *open_file;
-	struct cifsInodeInfo *cifsi = CIFS_I(inode);
-
-	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
-
-	/* cFYI(1, " write %d bytes to offset %lld of %s", write_size,
-	   *poffset, file->f_path.dentry->d_name.name); */
-
-	if (file->private_data == NULL)
-		return -EBADF;
-
-	open_file = file->private_data;
-	pTcon = tlink_tcon(open_file->tlink);
-
-	rc = generic_write_checks(file, poffset, &write_size, 0);
-	if (rc)
-		return rc;
-
-	xid = GetXid();
-
-	for (total_written = 0; write_size > total_written;
-	     total_written += bytes_written) {
-		rc = -EAGAIN;
-		while (rc == -EAGAIN) {
-			if (file->private_data == NULL) {
-				/* file has been closed on us */
-				FreeXid(xid);
-			/* if we have gotten here we have written some data
-			   and blocked, and the file has been freed on us while
-			   we blocked so return what we managed to write */
-				return total_written;
-			}
-			if (open_file->invalidHandle) {
-				/* we could deadlock if we called
-				   filemap_fdatawait from here so tell
-				   reopen_file not to flush data to server
-				   now */
-				rc = cifs_reopen_file(open_file, false);
-				if (rc != 0)
-					break;
-			}
-
-			rc = CIFSSMBWrite(xid, pTcon,
-				open_file->netfid,
-				min_t(const int, cifs_sb->wsize,
-				      write_size - total_written),
-				*poffset, &bytes_written,
-				NULL, write_data + total_written, 0);
-		}
-		if (rc || (bytes_written == 0)) {
-			if (total_written)
-				break;
-			else {
-				FreeXid(xid);
-				return rc;
-			}
-		} else {
-			cifs_update_eof(cifsi, *poffset, bytes_written);
-			*poffset += bytes_written;
-		}
-	}
-
-	cifs_stats_bytes_written(pTcon, total_written);
-
-/* Do not update local mtime - server will set its actual value on write
- *	inode->i_ctime = inode->i_mtime =
- * 		current_fs_time(inode->i_sb);*/
-	if (total_written > 0) {
-		spin_lock(&inode->i_lock);
-		if (*poffset > inode->i_size)
-			i_size_write(inode, *poffset);
-		spin_unlock(&inode->i_lock);
-	}
-	mark_inode_dirty_sync(inode);
-
-	FreeXid(xid);
-	return total_written;
-}
-
 static ssize_t cifs_write(struct cifsFileInfo *open_file,
 			  const char *write_data, size_t write_size,
 			  loff_t *poffset)
@@ -970,6 +883,9 @@ static ssize_t cifs_write(struct cifsFileInfo *open_file,
 	     total_written += bytes_written) {
 		rc = -EAGAIN;
 		while (rc == -EAGAIN) {
+			struct kvec iov[2];
+			unsigned int len;
+
 			if (open_file->invalidHandle) {
 				/* we could deadlock if we called
 				   filemap_fdatawait from here so tell
@@ -979,31 +895,14 @@ static ssize_t cifs_write(struct cifsFileInfo *open_file,
 				if (rc != 0)
 					break;
 			}
-			if (experimEnabled || (pTcon->ses->server &&
-				((pTcon->ses->server->secMode &
-				(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-				== 0))) {
-				struct kvec iov[2];
-				unsigned int len;
-
-				len = min((size_t)cifs_sb->wsize,
-					  write_size - total_written);
-				/* iov[0] is reserved for smb header */
-				iov[1].iov_base = (char *)write_data +
-						  total_written;
-				iov[1].iov_len = len;
-				rc = CIFSSMBWrite2(xid, pTcon,
-						open_file->netfid, len,
-						*poffset, &bytes_written,
-						iov, 1, 0);
-			} else
-				rc = CIFSSMBWrite(xid, pTcon,
-					 open_file->netfid,
-					 min_t(const int, cifs_sb->wsize,
-					       write_size - total_written),
-					 *poffset, &bytes_written,
-					 write_data + total_written,
-					 NULL, 0);
+
+			len = min((size_t)cifs_sb->wsize,
+				  write_size - total_written);
+			/* iov[0] is reserved for smb header */
+			iov[1].iov_base = (char *)write_data + total_written;
+			iov[1].iov_len = len;
+			rc = CIFSSMBWrite2(xid, pTcon, open_file->netfid, len,
+					   *poffset, &bytes_written, iov, 1, 0);
 		}
 		if (rc || (bytes_written == 0)) {
 			if (total_written)
@@ -1240,12 +1139,6 @@ static int cifs_writepages(struct address_space *mapping,
 	}
 
 	tcon = tlink_tcon(open_file->tlink);
-	if (!experimEnabled && tcon->ses->server->secMode &
-			(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
-		cifsFileInfo_put(open_file);
-		kfree(iov);
-		return generic_writepages(mapping, wbc);
-	}
 	cifsFileInfo_put(open_file);
 
 	xid = GetXid();
@@ -1438,9 +1331,10 @@ retry_write:
 	return rc;
 }
 
-static int cifs_writepage(struct page *page, struct writeback_control *wbc)
+static int
+cifs_writepage_locked(struct page *page, struct writeback_control *wbc)
 {
-	int rc = -EFAULT;
+	int rc;
 	int xid;
 
 	xid = GetXid();
@@ -1460,15 +1354,29 @@ static int cifs_writepage(struct page *page, struct writeback_control *wbc)
 	 * to fail to update with the state of the page correctly.
 	 */
 	set_page_writeback(page);
+retry_write:
 	rc = cifs_partialpagewrite(page, 0, PAGE_CACHE_SIZE);
-	SetPageUptodate(page); /* BB add check for error and Clearuptodate? */
-	unlock_page(page);
+	if (rc == -EAGAIN && wbc->sync_mode == WB_SYNC_ALL)
+		goto retry_write;
+	else if (rc == -EAGAIN)
+		redirty_page_for_writepage(wbc, page);
+	else if (rc != 0)
+		SetPageError(page);
+	else
+		SetPageUptodate(page);
 	end_page_writeback(page);
 	page_cache_release(page);
 	FreeXid(xid);
 	return rc;
 }
 
+static int cifs_writepage(struct page *page, struct writeback_control *wbc)
+{
+	int rc = cifs_writepage_locked(page, wbc);
+	unlock_page(page);
+	return rc;
+}
+
 static int cifs_write_end(struct file *file, struct address_space *mapping,
 			loff_t pos, unsigned len, unsigned copied,
 			struct page *page, void *fsdata)
@@ -1537,8 +1445,13 @@ int cifs_strict_fsync(struct file *file, int datasync)
 	cFYI(1, "Sync file - name: %s datasync: 0x%x",
 		file->f_path.dentry->d_name.name, datasync);
 
-	if (!CIFS_I(inode)->clientCanCacheRead)
-		cifs_invalidate_mapping(inode);
+	if (!CIFS_I(inode)->clientCanCacheRead) {
+		rc = cifs_invalidate_mapping(inode);
+		if (rc) {
+			cFYI(1, "rc: %d during invalidate phase", rc);
+			rc = 0; /* don't care about it in fsync */
+		}
+	}
 
 	tcon = tlink_tcon(smbfile->tlink);
 	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOSSYNC))
@@ -1744,7 +1657,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov,
 	return total_written;
 }
 
-static ssize_t cifs_user_writev(struct kiocb *iocb, const struct iovec *iov,
+ssize_t cifs_user_writev(struct kiocb *iocb, const struct iovec *iov,
 				unsigned long nr_segs, loff_t pos)
 {
 	ssize_t written;
@@ -1867,17 +1780,7 @@ cifs_iovec_read(struct file *file, const struct iovec *iov,
 	return total_read;
 }
 
-ssize_t cifs_user_read(struct file *file, char __user *read_data,
-		       size_t read_size, loff_t *poffset)
-{
-	struct iovec iov;
-	iov.iov_base = read_data;
-	iov.iov_len = read_size;
-
-	return cifs_iovec_read(file, &iov, 1, poffset);
-}
-
-static ssize_t cifs_user_readv(struct kiocb *iocb, const struct iovec *iov,
+ssize_t cifs_user_readv(struct kiocb *iocb, const struct iovec *iov,
 			       unsigned long nr_segs, loff_t pos)
 {
 	ssize_t read;
@@ -1980,6 +1883,24 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size,
 	return total_read;
 }
 
+/*
+ * If the page is mmap'ed into a process' page tables, then we need to make
+ * sure that it doesn't change while being written back.
+ */
+static int
+cifs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct page *page = vmf->page;
+
+	lock_page(page);
+	return VM_FAULT_LOCKED;
+}
+
+static struct vm_operations_struct cifs_file_vm_ops = {
+	.fault = filemap_fault,
+	.page_mkwrite = cifs_page_mkwrite,
+};
+
 int cifs_file_strict_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	int rc, xid;
@@ -1987,10 +1908,15 @@ int cifs_file_strict_mmap(struct file *file, struct vm_area_struct *vma)
 
 	xid = GetXid();
 
-	if (!CIFS_I(inode)->clientCanCacheRead)
-		cifs_invalidate_mapping(inode);
+	if (!CIFS_I(inode)->clientCanCacheRead) {
+		rc = cifs_invalidate_mapping(inode);
+		if (rc)
+			return rc;
+	}
 
 	rc = generic_file_mmap(file, vma);
+	if (rc == 0)
+		vma->vm_ops = &cifs_file_vm_ops;
 	FreeXid(xid);
 	return rc;
 }
@@ -2007,6 +1933,8 @@ int cifs_file_mmap(struct file *file, struct vm_area_struct *vma)
 		return rc;
 	}
 	rc = generic_file_mmap(file, vma);
+	if (rc == 0)
+		vma->vm_ops = &cifs_file_vm_ops;
 	FreeXid(xid);
 	return rc;
 }
@@ -2411,6 +2339,27 @@ static void cifs_invalidate_page(struct page *page, unsigned long offset)
 		cifs_fscache_invalidate_page(page, &cifsi->vfs_inode);
 }
 
+static int cifs_launder_page(struct page *page)
+{
+	int rc = 0;
+	loff_t range_start = page_offset(page);
+	loff_t range_end = range_start + (loff_t)(PAGE_CACHE_SIZE - 1);
+	struct writeback_control wbc = {
+		.sync_mode = WB_SYNC_ALL,
+		.nr_to_write = 0,
+		.range_start = range_start,
+		.range_end = range_end,
+	};
+
+	cFYI(1, "Launder page: %p", page);
+
+	if (clear_page_dirty_for_io(page))
+		rc = cifs_writepage_locked(page, &wbc);
+
+	cifs_fscache_invalidate_page(page, page->mapping->host);
+	return rc;
+}
+
 void cifs_oplock_break(struct work_struct *work)
 {
 	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
@@ -2482,7 +2431,7 @@ const struct address_space_operations cifs_addr_ops = {
 	.set_page_dirty = __set_page_dirty_nobuffers,
 	.releasepage = cifs_release_page,
 	.invalidatepage = cifs_invalidate_page,
-	/* .direct_IO = */
+	.launder_page = cifs_launder_page,
 };
 
 /*
@@ -2499,5 +2448,5 @@ const struct address_space_operations cifs_addr_ops_smallbuf = {
 	.set_page_dirty = __set_page_dirty_nobuffers,
 	.releasepage = cifs_release_page,
 	.invalidatepage = cifs_invalidate_page,
-	/* .direct_IO = */
+	.launder_page = cifs_launder_page,
 };
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 8852470b4fb..de02ed5e25c 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -878,7 +878,7 @@ retry_iget5_locked:
 }
 
 /* gets root inode */
-struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
+struct inode *cifs_root_iget(struct super_block *sb)
 {
 	int xid;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
@@ -1683,71 +1683,70 @@ cifs_inode_needs_reval(struct inode *inode)
 /*
  * Zap the cache. Called when invalid_mapping flag is set.
  */
-void
+int
 cifs_invalidate_mapping(struct inode *inode)
 {
-	int rc;
+	int rc = 0;
 	struct cifsInodeInfo *cifs_i = CIFS_I(inode);
 
 	cifs_i->invalid_mapping = false;
 
-	/* write back any cached data */
 	if (inode->i_mapping && inode->i_mapping->nrpages != 0) {
-		rc = filemap_write_and_wait(inode->i_mapping);
-		mapping_set_error(inode->i_mapping, rc);
+		rc = invalidate_inode_pages2(inode->i_mapping);
+		if (rc) {
+			cERROR(1, "%s: could not invalidate inode %p", __func__,
+			       inode);
+			cifs_i->invalid_mapping = true;
+		}
 	}
-	invalidate_remote_inode(inode);
+
 	cifs_fscache_reset_inode_cookie(inode);
+	return rc;
 }
 
-int cifs_revalidate_file(struct file *filp)
+int cifs_revalidate_file_attr(struct file *filp)
 {
 	int rc = 0;
 	struct inode *inode = filp->f_path.dentry->d_inode;
 	struct cifsFileInfo *cfile = (struct cifsFileInfo *) filp->private_data;
 
 	if (!cifs_inode_needs_reval(inode))
-		goto check_inval;
+		return rc;
 
 	if (tlink_tcon(cfile->tlink)->unix_ext)
 		rc = cifs_get_file_info_unix(filp);
 	else
 		rc = cifs_get_file_info(filp);
 
-check_inval:
-	if (CIFS_I(inode)->invalid_mapping)
-		cifs_invalidate_mapping(inode);
-
 	return rc;
 }
 
-/* revalidate a dentry's inode attributes */
-int cifs_revalidate_dentry(struct dentry *dentry)
+int cifs_revalidate_dentry_attr(struct dentry *dentry)
 {
 	int xid;
 	int rc = 0;
-	char *full_path = NULL;
 	struct inode *inode = dentry->d_inode;
 	struct super_block *sb = dentry->d_sb;
+	char *full_path = NULL;
 
 	if (inode == NULL)
 		return -ENOENT;
 
-	xid = GetXid();
-
 	if (!cifs_inode_needs_reval(inode))
-		goto check_inval;
+		return rc;
+
+	xid = GetXid();
 
 	/* can not safely grab the rename sem here if rename calls revalidate
 	   since that would deadlock */
 	full_path = build_path_from_dentry(dentry);
 	if (full_path == NULL) {
 		rc = -ENOMEM;
-		goto check_inval;
+		goto out;
 	}
 
-	cFYI(1, "Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
-		 "jiffies %ld", full_path, inode, inode->i_count.counter,
+	cFYI(1, "Update attributes: %s inode 0x%p count %d dentry: 0x%p d_time "
+		 "%ld jiffies %ld", full_path, inode, inode->i_count.counter,
 		 dentry, dentry->d_time, jiffies);
 
 	if (cifs_sb_master_tcon(CIFS_SB(sb))->unix_ext)
@@ -1756,41 +1755,83 @@ int cifs_revalidate_dentry(struct dentry *dentry)
 		rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
 					 xid, NULL);
 
-check_inval:
-	if (CIFS_I(inode)->invalid_mapping)
-		cifs_invalidate_mapping(inode);
-
+out:
 	kfree(full_path);
 	FreeXid(xid);
 	return rc;
 }
 
+int cifs_revalidate_file(struct file *filp)
+{
+	int rc;
+	struct inode *inode = filp->f_path.dentry->d_inode;
+
+	rc = cifs_revalidate_file_attr(filp);
+	if (rc)
+		return rc;
+
+	if (CIFS_I(inode)->invalid_mapping)
+		rc = cifs_invalidate_mapping(inode);
+	return rc;
+}
+
+/* revalidate a dentry's inode attributes */
+int cifs_revalidate_dentry(struct dentry *dentry)
+{
+	int rc;
+	struct inode *inode = dentry->d_inode;
+
+	rc = cifs_revalidate_dentry_attr(dentry);
+	if (rc)
+		return rc;
+
+	if (CIFS_I(inode)->invalid_mapping)
+		rc = cifs_invalidate_mapping(inode);
+	return rc;
+}
+
 int cifs_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		 struct kstat *stat)
 {
 	struct cifs_sb_info *cifs_sb = CIFS_SB(dentry->d_sb);
 	struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
-	int err = cifs_revalidate_dentry(dentry);
-
-	if (!err) {
-		generic_fillattr(dentry->d_inode, stat);
-		stat->blksize = CIFS_MAX_MSGSIZE;
-		stat->ino = CIFS_I(dentry->d_inode)->uniqueid;
+	struct inode *inode = dentry->d_inode;
+	int rc;
 
-		/*
-		 * If on a multiuser mount without unix extensions, and the
-		 * admin hasn't overridden them, set the ownership to the
-		 * fsuid/fsgid of the current process.
-		 */
-		if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER) &&
-		    !tcon->unix_ext) {
-			if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID))
-				stat->uid = current_fsuid();
-			if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID))
-				stat->gid = current_fsgid();
+	/*
+	 * We need to be sure that all dirty pages are written and the server
+	 * has actual ctime, mtime and file length.
+	 */
+	if (!CIFS_I(inode)->clientCanCacheRead && inode->i_mapping &&
+	    inode->i_mapping->nrpages != 0) {
+		rc = filemap_fdatawait(inode->i_mapping);
+		if (rc) {
+			mapping_set_error(inode->i_mapping, rc);
+			return rc;
 		}
 	}
-	return err;
+
+	rc = cifs_revalidate_dentry_attr(dentry);
+	if (rc)
+		return rc;
+
+	generic_fillattr(inode, stat);
+	stat->blksize = CIFS_MAX_MSGSIZE;
+	stat->ino = CIFS_I(inode)->uniqueid;
+
+	/*
+	 * If on a multiuser mount without unix extensions, and the admin hasn't
+	 * overridden them, set the ownership to the fsuid/fsgid of the current
+	 * process.
+	 */
+	if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER) &&
+	    !tcon->unix_ext) {
+		if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID))
+			stat->uid = current_fsuid();
+		if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID))
+			stat->gid = current_fsgid();
+	}
+	return rc;
 }
 
 static int cifs_truncate_page(struct address_space *mapping, loff_t from)
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index e8804d37340..ce417a9764a 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -239,7 +239,7 @@ CIFSQueryMFSymLink(const int xid, struct cifsTconInfo *tcon,
 	if (rc != 0)
 		return rc;
 
-	if (file_info.EndOfFile != CIFS_MF_SYMLINK_FILE_SIZE) {
+	if (file_info.EndOfFile != cpu_to_le64(CIFS_MF_SYMLINK_FILE_SIZE)) {
 		CIFSSMBClose(xid, tcon, netfid);
 		/* it's not a symlink */
 		return -EINVAL;
@@ -316,7 +316,7 @@ CIFSCheckMFSymlink(struct cifs_fattr *fattr,
 	if (rc != 0)
 		goto out;
 
-	if (file_info.EndOfFile != CIFS_MF_SYMLINK_FILE_SIZE) {
+	if (file_info.EndOfFile != cpu_to_le64(CIFS_MF_SYMLINK_FILE_SIZE)) {
 		CIFSSMBClose(xid, pTcon, netfid);
 		/* it's not a symlink */
 		goto out;
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 2a930a752a7..907531ac588 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -100,6 +100,7 @@ sesInfoFree(struct cifsSesInfo *buf_to_free)
 		memset(buf_to_free->password, 0, strlen(buf_to_free->password));
 		kfree(buf_to_free->password);
 	}
+	kfree(buf_to_free->user_name);
 	kfree(buf_to_free->domainName);
 	kfree(buf_to_free);
 }
@@ -303,12 +304,10 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ ,
 
 	memset(temp, 0, 256); /* bigger than MAX_CIFS_HDR_SIZE */
 
-	buffer->smb_buf_length =
+	buffer->smb_buf_length = cpu_to_be32(
 	    (2 * word_count) + sizeof(struct smb_hdr) -
 	    4 /*  RFC 1001 length field does not count */  +
-	    2 /* for bcc field itself */ ;
-	/* Note that this is the only network field that has to be converted
-	   to big endian and it is done just before we send it */
+	    2 /* for bcc field itself */) ;
 
 	buffer->Protocol[0] = 0xFF;
 	buffer->Protocol[1] = 'S';
@@ -423,7 +422,7 @@ check_smb_hdr(struct smb_hdr *smb, __u16 mid)
 int
 checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length)
 {
-	__u32 len = smb->smb_buf_length;
+	__u32 len = be32_to_cpu(smb->smb_buf_length);
 	__u32 clc_len;  /* calculated length */
 	cFYI(0, "checkSMB Length: 0x%x, smb_buf_length: 0x%x", length, len);
 
@@ -463,7 +462,7 @@ checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length)
 
 	if (check_smb_hdr(smb, mid))
 		return 1;
-	clc_len = smbCalcSize_LE(smb);
+	clc_len = smbCalcSize(smb);
 
 	if (4 + len != length) {
 		cERROR(1, "Length read does not match RFC1001 length %d",
@@ -520,7 +519,7 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
 			(struct smb_com_transaction_change_notify_rsp *)buf;
 		struct file_notify_information *pnotify;
 		__u32 data_offset = 0;
-		if (pSMBr->ByteCount > sizeof(struct file_notify_information)) {
+		if (get_bcc(buf) > sizeof(struct file_notify_information)) {
 			data_offset = le32_to_cpu(pSMBr->DataOffset);
 
 			pnotify = (struct file_notify_information *)
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 79f641eeda3..79b71c2c7c9 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -919,13 +919,6 @@ smbCalcSize(struct smb_hdr *ptr)
 		2 /* size of the bcc field */ + get_bcc(ptr));
 }
 
-unsigned int
-smbCalcSize_LE(struct smb_hdr *ptr)
-{
-	return (sizeof(struct smb_hdr) + (2 * ptr->WordCount) +
-		2 /* size of the bcc field */ + get_bcc_le(ptr));
-}
-
 /* The following are taken from fs/ntfs/util.c */
 
 #define NTFS_TIME_OFFSET ((u64)(369*365 + 89) * 24 * 3600 * 10000000)
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 16765703131..7dd46210037 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -219,12 +219,12 @@ static void unicode_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses,
 		bcc_ptr++;
 	} */
 	/* copy user */
-	if (ses->userName == NULL) {
+	if (ses->user_name == NULL) {
 		/* null user mount */
 		*bcc_ptr = 0;
 		*(bcc_ptr+1) = 0;
 	} else {
-		bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->userName,
+		bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->user_name,
 					  MAX_USERNAME_SIZE, nls_cp);
 	}
 	bcc_ptr += 2 * bytes_ret;
@@ -244,12 +244,11 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses,
 	/* copy user */
 	/* BB what about null user mounts - check that we do this BB */
 	/* copy user */
-	if (ses->userName == NULL) {
-		/* BB what about null user mounts - check that we do this BB */
-	} else {
-		strncpy(bcc_ptr, ses->userName, MAX_USERNAME_SIZE);
-	}
-	bcc_ptr += strnlen(ses->userName, MAX_USERNAME_SIZE);
+	if (ses->user_name != NULL)
+		strncpy(bcc_ptr, ses->user_name, MAX_USERNAME_SIZE);
+	/* else null user mount */
+
+	bcc_ptr += strnlen(ses->user_name, MAX_USERNAME_SIZE);
 	*bcc_ptr = 0;
 	bcc_ptr++; /* account for null termination */
 
@@ -277,7 +276,7 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses,
 }
 
 static void
-decode_unicode_ssetup(char **pbcc_area, __u16 bleft, struct cifsSesInfo *ses,
+decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
 		      const struct nls_table *nls_cp)
 {
 	int len;
@@ -285,19 +284,6 @@ decode_unicode_ssetup(char **pbcc_area, __u16 bleft, struct cifsSesInfo *ses,
 
 	cFYI(1, "bleft %d", bleft);
 
-	/*
-	 * Windows servers do not always double null terminate their final
-	 * Unicode string. Check to see if there are an uneven number of bytes
-	 * left. If so, then add an extra NULL pad byte to the end of the
-	 * response.
-	 *
-	 * See section 2.7.2 in "Implementing CIFS" for details
-	 */
-	if (bleft % 2) {
-		data[bleft] = 0;
-		++bleft;
-	}
-
 	kfree(ses->serverOS);
 	ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
 	cFYI(1, "serverOS=%s", ses->serverOS);
@@ -405,8 +391,8 @@ static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
 	/* BB spec says that if AvId field of MsvAvTimestamp is populated then
 		we must set the MIC field of the AUTHENTICATE_MESSAGE */
 	ses->ntlmssp->server_flags = le32_to_cpu(pblob->NegotiateFlags);
-	tioffset = cpu_to_le16(pblob->TargetInfoArray.BufferOffset);
-	tilen = cpu_to_le16(pblob->TargetInfoArray.Length);
+	tioffset = le32_to_cpu(pblob->TargetInfoArray.BufferOffset);
+	tilen = le16_to_cpu(pblob->TargetInfoArray.Length);
 	if (tilen) {
 		ses->auth_key.response = kmalloc(tilen, GFP_KERNEL);
 		if (!ses->auth_key.response) {
@@ -523,14 +509,14 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
 		tmp += len;
 	}
 
-	if (ses->userName == NULL) {
+	if (ses->user_name == NULL) {
 		sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
 		sec_blob->UserName.Length = 0;
 		sec_blob->UserName.MaximumLength = 0;
 		tmp += 2;
 	} else {
 		int len;
-		len = cifs_strtoUCS((__le16 *)tmp, ses->userName,
+		len = cifs_strtoUCS((__le16 *)tmp, ses->user_name,
 				    MAX_USERNAME_SIZE, nls_cp);
 		len *= 2; /* unicode is 2 bytes each */
 		sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
@@ -635,7 +621,7 @@ ssetup_ntlmssp_authenticate:
 	and rest of bcc area. This allows us to avoid
 	a large buffer 17K allocation */
 	iov[0].iov_base = (char *)pSMB;
-	iov[0].iov_len = smb_buf->smb_buf_length + 4;
+	iov[0].iov_len = be32_to_cpu(smb_buf->smb_buf_length) + 4;
 
 	/* setting this here allows the code at the end of the function
 	   to free the request buffer if there's an error */
@@ -670,7 +656,7 @@ ssetup_ntlmssp_authenticate:
 		 * to use challenge/response method (i.e. Password bit is 1).
 		 */
 
-		calc_lanman_hash(ses->password, ses->server->cryptkey,
+		rc = calc_lanman_hash(ses->password, ses->server->cryptkey,
 				 ses->server->secMode & SECMODE_PW_ENCRYPT ?
 					true : false, lnm_session_key);
 
@@ -873,9 +859,10 @@ ssetup_ntlmssp_authenticate:
 	iov[2].iov_len = (long) bcc_ptr - (long) str_area;
 
 	count = iov[1].iov_len + iov[2].iov_len;
-	smb_buf->smb_buf_length += count;
+	smb_buf->smb_buf_length =
+		cpu_to_be32(be32_to_cpu(smb_buf->smb_buf_length) + count);
 
-	put_bcc_le(count, smb_buf);
+	put_bcc(count, smb_buf);
 
 	rc = SendReceive2(xid, ses, iov, 3 /* num_iovecs */, &resp_buf_type,
 			  CIFS_LOG_ERROR);
@@ -930,7 +917,9 @@ ssetup_ntlmssp_authenticate:
 	}
 
 	/* BB check if Unicode and decode strings */
-	if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
+	if (bytes_remaining == 0) {
+		/* no string area to decode, do nothing */
+	} else if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
 		/* unicode string area must be word-aligned */
 		if (((unsigned long) bcc_ptr - (unsigned long) smb_buf) % 2) {
 			++bcc_ptr;
diff --git a/fs/cifs/smbdes.c b/fs/cifs/smbdes.c
deleted file mode 100644
index 04721485925..00000000000
--- a/fs/cifs/smbdes.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
-   Unix SMB/Netbios implementation.
-   Version 1.9.
-
-   a partial implementation of DES designed for use in the
-   SMB authentication protocol
-
-   Copyright (C) Andrew Tridgell 1998
-   Modified by Steve French (sfrench@us.ibm.com) 2002,2004
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* NOTES:
-
-   This code makes no attempt to be fast! In fact, it is a very
-   slow implementation
-
-   This code is NOT a complete DES implementation. It implements only
-   the minimum necessary for SMB authentication, as used by all SMB
-   products (including every copy of Microsoft Windows95 ever sold)
-
-   In particular, it can only do a unchained forward DES pass. This
-   means it is not possible to use this code for encryption/decryption
-   of data, instead it is only useful as a "hash" algorithm.
-
-   There is no entry point into this code that allows normal DES operation.
-
-   I believe this means that this code does not come under ITAR
-   regulations but this is NOT a legal opinion. If you are concerned
-   about the applicability of ITAR regulations to this code then you
-   should confirm it for yourself (and maybe let me know if you come
-   up with a different answer to the one above)
-*/
-#include <linux/slab.h>
-#define uchar unsigned char
-
-static uchar perm1[56] = { 57, 49, 41, 33, 25, 17, 9,
-	1, 58, 50, 42, 34, 26, 18,
-	10, 2, 59, 51, 43, 35, 27,
-	19, 11, 3, 60, 52, 44, 36,
-	63, 55, 47, 39, 31, 23, 15,
-	7, 62, 54, 46, 38, 30, 22,
-	14, 6, 61, 53, 45, 37, 29,
-	21, 13, 5, 28, 20, 12, 4
-};
-
-static uchar perm2[48] = { 14, 17, 11, 24, 1, 5,
-	3, 28, 15, 6, 21, 10,
-	23, 19, 12, 4, 26, 8,
-	16, 7, 27, 20, 13, 2,
-	41, 52, 31, 37, 47, 55,
-	30, 40, 51, 45, 33, 48,
-	44, 49, 39, 56, 34, 53,
-	46, 42, 50, 36, 29, 32
-};
-
-static uchar perm3[64] = { 58, 50, 42, 34, 26, 18, 10, 2,
-	60, 52, 44, 36, 28, 20, 12, 4,
-	62, 54, 46, 38, 30, 22, 14, 6,
-	64, 56, 48, 40, 32, 24, 16, 8,
-	57, 49, 41, 33, 25, 17, 9, 1,
-	59, 51, 43, 35, 27, 19, 11, 3,
-	61, 53, 45, 37, 29, 21, 13, 5,
-	63, 55, 47, 39, 31, 23, 15, 7
-};
-
-static uchar perm4[48] = { 32, 1, 2, 3, 4, 5,
-	4, 5, 6, 7, 8, 9,
-	8, 9, 10, 11, 12, 13,
-	12, 13, 14, 15, 16, 17,
-	16, 17, 18, 19, 20, 21,
-	20, 21, 22, 23, 24, 25,
-	24, 25, 26, 27, 28, 29,
-	28, 29, 30, 31, 32, 1
-};
-
-static uchar perm5[32] = { 16, 7, 20, 21,
-	29, 12, 28, 17,
-	1, 15, 23, 26,
-	5, 18, 31, 10,
-	2, 8, 24, 14,
-	32, 27, 3, 9,
-	19, 13, 30, 6,
-	22, 11, 4, 25
-};
-
-static uchar perm6[64] = { 40, 8, 48, 16, 56, 24, 64, 32,
-	39, 7, 47, 15, 55, 23, 63, 31,
-	38, 6, 46, 14, 54, 22, 62, 30,
-	37, 5, 45, 13, 53, 21, 61, 29,
-	36, 4, 44, 12, 52, 20, 60, 28,
-	35, 3, 43, 11, 51, 19, 59, 27,
-	34, 2, 42, 10, 50, 18, 58, 26,
-	33, 1, 41, 9, 49, 17, 57, 25
-};
-
-static uchar sc[16] = { 1, 1, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 2, 1 };
-
-static uchar sbox[8][4][16] = {
-	{{14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7},
-	 {0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8},
-	 {4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0},
-	 {15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13} },
-
-	{{15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10},
-	 {3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5},
-	 {0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15},
-	 {13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9} },
-
-	{{10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8},
-	 {13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1},
-	 {13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7},
-	 {1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12} },
-
-	{{7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15},
-	 {13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9},
-	 {10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4},
-	 {3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14} },
-
-	{{2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9},
-	 {14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6},
-	 {4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14},
-	 {11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3} },
-
-	{{12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11},
-	 {10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8},
-	 {9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6},
-	 {4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13} },
-
-	{{4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1},
-	 {13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6},
-	 {1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2},
-	 {6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12} },
-
-	{{13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7},
-	 {1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2},
-	 {7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8},
-	 {2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11} }
-};
-
-static void
-permute(char *out, char *in, uchar *p, int n)
-{
-	int i;
-	for (i = 0; i < n; i++)
-		out[i] = in[p[i] - 1];
-}
-
-static void
-lshift(char *d, int count, int n)
-{
-	char out[64];
-	int i;
-	for (i = 0; i < n; i++)
-		out[i] = d[(i + count) % n];
-	for (i = 0; i < n; i++)
-		d[i] = out[i];
-}
-
-static void
-concat(char *out, char *in1, char *in2, int l1, int l2)
-{
-	while (l1--)
-		*out++ = *in1++;
-	while (l2--)
-		*out++ = *in2++;
-}
-
-static void
-xor(char *out, char *in1, char *in2, int n)
-{
-	int i;
-	for (i = 0; i < n; i++)
-		out[i] = in1[i] ^ in2[i];
-}
-
-static void
-dohash(char *out, char *in, char *key, int forw)
-{
-	int i, j, k;
-	char *pk1;
-	char c[28];
-	char d[28];
-	char *cd;
-	char (*ki)[48];
-	char *pd1;
-	char l[32], r[32];
-	char *rl;
-
-	/* Have to reduce stack usage */
-	pk1 = kmalloc(56+56+64+64, GFP_KERNEL);
-	if (pk1 == NULL)
-		return;
-
-	ki = kmalloc(16*48, GFP_KERNEL);
-	if (ki == NULL) {
-		kfree(pk1);
-		return;
-	}
-
-	cd = pk1 + 56;
-	pd1 = cd  + 56;
-	rl = pd1 + 64;
-
-	permute(pk1, key, perm1, 56);
-
-	for (i = 0; i < 28; i++)
-		c[i] = pk1[i];
-	for (i = 0; i < 28; i++)
-		d[i] = pk1[i + 28];
-
-	for (i = 0; i < 16; i++) {
-		lshift(c, sc[i], 28);
-		lshift(d, sc[i], 28);
-
-		concat(cd, c, d, 28, 28);
-		permute(ki[i], cd, perm2, 48);
-	}
-
-	permute(pd1, in, perm3, 64);
-
-	for (j = 0; j < 32; j++) {
-		l[j] = pd1[j];
-		r[j] = pd1[j + 32];
-	}
-
-	for (i = 0; i < 16; i++) {
-		char *er;  /* er[48]  */
-		char *erk; /* erk[48] */
-		char b[8][6];
-		char *cb;  /* cb[32]  */
-		char *pcb; /* pcb[32] */
-		char *r2;  /* r2[32]  */
-
-		er = kmalloc(48+48+32+32+32, GFP_KERNEL);
-		if (er == NULL) {
-			kfree(pk1);
-			kfree(ki);
-			return;
-		}
-		erk = er+48;
-		cb  = erk+48;
-		pcb = cb+32;
-		r2  = pcb+32;
-
-		permute(er, r, perm4, 48);
-
-		xor(erk, er, ki[forw ? i : 15 - i], 48);
-
-		for (j = 0; j < 8; j++)
-			for (k = 0; k < 6; k++)
-				b[j][k] = erk[j * 6 + k];
-
-		for (j = 0; j < 8; j++) {
-			int m, n;
-			m = (b[j][0] << 1) | b[j][5];
-
-			n = (b[j][1] << 3) | (b[j][2] << 2) | (b[j][3] <<
-							       1) | b[j][4];
-
-			for (k = 0; k < 4; k++)
-				b[j][k] =
-				    (sbox[j][m][n] & (1 << (3 - k))) ? 1 : 0;
-		}
-
-		for (j = 0; j < 8; j++)
-			for (k = 0; k < 4; k++)
-				cb[j * 4 + k] = b[j][k];
-		permute(pcb, cb, perm5, 32);
-
-		xor(r2, l, pcb, 32);
-
-		for (j = 0; j < 32; j++)
-			l[j] = r[j];
-
-		for (j = 0; j < 32; j++)
-			r[j] = r2[j];
-
-		kfree(er);
-	}
-
-	concat(rl, r, l, 32, 32);
-
-	permute(out, rl, perm6, 64);
-	kfree(pk1);
-	kfree(ki);
-}
-
-static void
-str_to_key(unsigned char *str, unsigned char *key)
-{
-	int i;
-
-	key[0] = str[0] >> 1;
-	key[1] = ((str[0] & 0x01) << 6) | (str[1] >> 2);
-	key[2] = ((str[1] & 0x03) << 5) | (str[2] >> 3);
-	key[3] = ((str[2] & 0x07) << 4) | (str[3] >> 4);
-	key[4] = ((str[3] & 0x0F) << 3) | (str[4] >> 5);
-	key[5] = ((str[4] & 0x1F) << 2) | (str[5] >> 6);
-	key[6] = ((str[5] & 0x3F) << 1) | (str[6] >> 7);
-	key[7] = str[6] & 0x7F;
-	for (i = 0; i < 8; i++)
-		key[i] = (key[i] << 1);
-}
-
-static void
-smbhash(unsigned char *out, const unsigned char *in, unsigned char *key,
-	int forw)
-{
-	int i;
-	char *outb; /* outb[64] */
-	char *inb;  /* inb[64]  */
-	char *keyb; /* keyb[64] */
-	unsigned char key2[8];
-
-	outb = kmalloc(64 * 3, GFP_KERNEL);
-	if (outb == NULL)
-		return;
-
-	inb  = outb + 64;
-	keyb = inb +  64;
-
-	str_to_key(key, key2);
-
-	for (i = 0; i < 64; i++) {
-		inb[i] = (in[i / 8] & (1 << (7 - (i % 8)))) ? 1 : 0;
-		keyb[i] = (key2[i / 8] & (1 << (7 - (i % 8)))) ? 1 : 0;
-		outb[i] = 0;
-	}
-
-	dohash(outb, inb, keyb, forw);
-
-	for (i = 0; i < 8; i++)
-		out[i] = 0;
-
-	for (i = 0; i < 64; i++) {
-		if (outb[i])
-			out[i / 8] |= (1 << (7 - (i % 8)));
-	}
-	kfree(outb);
-}
-
-void
-E_P16(unsigned char *p14, unsigned char *p16)
-{
-	unsigned char sp8[8] =
-	    { 0x4b, 0x47, 0x53, 0x21, 0x40, 0x23, 0x24, 0x25 };
-	smbhash(p16, sp8, p14, 1);
-	smbhash(p16 + 8, sp8, p14 + 7, 1);
-}
-
-void
-E_P24(unsigned char *p21, const unsigned char *c8, unsigned char *p24)
-{
-	smbhash(p24, c8, p21, 1);
-	smbhash(p24 + 8, c8, p21 + 7, 1);
-	smbhash(p24 + 16, c8, p21 + 14, 1);
-}
-
-#if 0 /* currently unused */
-static void
-D_P16(unsigned char *p14, unsigned char *in, unsigned char *out)
-{
-	smbhash(out, in, p14, 0);
-	smbhash(out + 8, in + 8, p14 + 7, 0);
-}
-
-static void
-E_old_pw_hash(unsigned char *p14, unsigned char *in, unsigned char *out)
-{
-	smbhash(out, in, p14, 1);
-	smbhash(out + 8, in + 8, p14 + 7, 1);
-}
-/* these routines are currently unneeded, but may be
-	needed later */
-void
-cred_hash1(unsigned char *out, unsigned char *in, unsigned char *key)
-{
-	unsigned char buf[8];
-
-	smbhash(buf, in, key, 1);
-	smbhash(out, buf, key + 9, 1);
-}
-
-void
-cred_hash2(unsigned char *out, unsigned char *in, unsigned char *key)
-{
-	unsigned char buf[8];
-	static unsigned char key2[8];
-
-	smbhash(buf, in, key, 1);
-	key2[0] = key[7];
-	smbhash(out, buf, key2, 1);
-}
-
-void
-cred_hash3(unsigned char *out, unsigned char *in, unsigned char *key, int forw)
-{
-	static unsigned char key2[8];
-
-	smbhash(out, in, key, forw);
-	key2[0] = key[7];
-	smbhash(out + 8, in + 8, key2, forw);
-}
-#endif /* unneeded routines */
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index b5041c84998..1525d5e662b 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -47,6 +47,88 @@
 #define SSVALX(buf,pos,val) (CVAL(buf,pos)=(val)&0xFF,CVAL(buf,pos+1)=(val)>>8)
 #define SSVAL(buf,pos,val) SSVALX((buf),(pos),((__u16)(val)))
 
+static void
+str_to_key(unsigned char *str, unsigned char *key)
+{
+	int i;
+
+	key[0] = str[0] >> 1;
+	key[1] = ((str[0] & 0x01) << 6) | (str[1] >> 2);
+	key[2] = ((str[1] & 0x03) << 5) | (str[2] >> 3);
+	key[3] = ((str[2] & 0x07) << 4) | (str[3] >> 4);
+	key[4] = ((str[3] & 0x0F) << 3) | (str[4] >> 5);
+	key[5] = ((str[4] & 0x1F) << 2) | (str[5] >> 6);
+	key[6] = ((str[5] & 0x3F) << 1) | (str[6] >> 7);
+	key[7] = str[6] & 0x7F;
+	for (i = 0; i < 8; i++)
+		key[i] = (key[i] << 1);
+}
+
+static int
+smbhash(unsigned char *out, const unsigned char *in, unsigned char *key)
+{
+	int rc;
+	unsigned char key2[8];
+	struct crypto_blkcipher *tfm_des;
+	struct scatterlist sgin, sgout;
+	struct blkcipher_desc desc;
+
+	str_to_key(key, key2);
+
+	tfm_des = crypto_alloc_blkcipher("ecb(des)", 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(tfm_des)) {
+		rc = PTR_ERR(tfm_des);
+		cERROR(1, "could not allocate des crypto API\n");
+		goto smbhash_err;
+	}
+
+	desc.tfm = tfm_des;
+
+	crypto_blkcipher_setkey(tfm_des, key2, 8);
+
+	sg_init_one(&sgin, in, 8);
+	sg_init_one(&sgout, out, 8);
+
+	rc = crypto_blkcipher_encrypt(&desc, &sgout, &sgin, 8);
+	if (rc) {
+		cERROR(1, "could not encrypt crypt key rc: %d\n", rc);
+		crypto_free_blkcipher(tfm_des);
+		goto smbhash_err;
+	}
+
+smbhash_err:
+	return rc;
+}
+
+static int
+E_P16(unsigned char *p14, unsigned char *p16)
+{
+	int rc;
+	unsigned char sp8[8] =
+	    { 0x4b, 0x47, 0x53, 0x21, 0x40, 0x23, 0x24, 0x25 };
+
+	rc = smbhash(p16, sp8, p14);
+	if (rc)
+		return rc;
+	rc = smbhash(p16 + 8, sp8, p14 + 7);
+	return rc;
+}
+
+static int
+E_P24(unsigned char *p21, const unsigned char *c8, unsigned char *p24)
+{
+	int rc;
+
+	rc = smbhash(p24, c8, p21);
+	if (rc)
+		return rc;
+	rc = smbhash(p24 + 8, c8, p21 + 7);
+	if (rc)
+		return rc;
+	rc = smbhash(p24 + 16, c8, p21 + 14);
+	return rc;
+}
+
 /* produce a md4 message digest from data of length n bytes */
 int
 mdfour(unsigned char *md4_hash, unsigned char *link_str, int link_len)
@@ -87,40 +169,30 @@ mdfour_err:
 	return rc;
 }
 
-/* Does the des encryption from the NT or LM MD4 hash. */
-static void
-SMBOWFencrypt(unsigned char passwd[16], const unsigned char *c8,
-	      unsigned char p24[24])
-{
-	unsigned char p21[21];
-
-	memset(p21, '\0', 21);
-
-	memcpy(p21, passwd, 16);
-	E_P24(p21, c8, p24);
-}
-
 /*
    This implements the X/Open SMB password encryption
    It takes a password, a 8 byte "crypt key" and puts 24 bytes of
    encrypted password into p24 */
 /* Note that password must be uppercased and null terminated */
-void
+int
 SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24)
 {
-	unsigned char p14[15], p21[21];
+	int rc;
+	unsigned char p14[14], p16[16], p21[21];
 
-	memset(p21, '\0', 21);
 	memset(p14, '\0', 14);
-	strncpy((char *) p14, (char *) passwd, 14);
+	memset(p16, '\0', 16);
+	memset(p21, '\0', 21);
 
-/*	strupper((char *)p14); *//* BB at least uppercase the easy range */
-	E_P16(p14, p21);
+	memcpy(p14, passwd, 14);
+	rc = E_P16(p14, p16);
+	if (rc)
+		return rc;
 
-	SMBOWFencrypt(p21, c8, p24);
+	memcpy(p21, p16, 16);
+	rc = E_P24(p21, c8, p24);
 
-	memset(p14, 0, 15);
-	memset(p21, 0, 21);
+	return rc;
 }
 
 /* Routines for Windows NT MD4 Hash functions. */
@@ -279,16 +351,18 @@ int
 SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24)
 {
 	int rc;
-	unsigned char p21[21];
+	unsigned char p16[16], p21[21];
 
+	memset(p16, '\0', 16);
 	memset(p21, '\0', 21);
 
-	rc = E_md4hash(passwd, p21);
+	rc = E_md4hash(passwd, p16);
 	if (rc) {
 		cFYI(1, "%s Can't generate NT hash, error: %d", __func__, rc);
 		return rc;
 	}
-	SMBOWFencrypt(p21, c8, p24);
+	memcpy(p21, p16, 16);
+	rc = E_P24(p21, c8, p24);
 	return rc;
 }
 
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 46d8756f2b2..f2513fb8c39 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -129,7 +129,7 @@ smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec)
 	unsigned int len = iov[0].iov_len;
 	unsigned int total_len;
 	int first_vec = 0;
-	unsigned int smb_buf_length = smb_buffer->smb_buf_length;
+	unsigned int smb_buf_length = be32_to_cpu(smb_buffer->smb_buf_length);
 	struct socket *ssocket = server->ssocket;
 
 	if (ssocket == NULL)
@@ -144,17 +144,10 @@ smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec)
 	else
 		smb_msg.msg_flags = MSG_NOSIGNAL;
 
-	/* smb header is converted in header_assemble. bcc and rest of SMB word
-	   area, and byte area if necessary, is converted to littleendian in
-	   cifssmb.c and RFC1001 len is converted to bigendian in smb_send
-	   Flags2 is converted in SendReceive */
-
-
 	total_len = 0;
 	for (i = 0; i < n_vec; i++)
 		total_len += iov[i].iov_len;
 
-	smb_buffer->smb_buf_length = cpu_to_be32(smb_buffer->smb_buf_length);
 	cFYI(1, "Sending smb:  total_len %d", total_len);
 	dump_smb(smb_buffer, len);
 
@@ -243,7 +236,7 @@ smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec)
 
 	/* Don't want to modify the buffer as a
 	   side effect of this call. */
-	smb_buffer->smb_buf_length = smb_buf_length;
+	smb_buffer->smb_buf_length = cpu_to_be32(smb_buf_length);
 
 	return rc;
 }
@@ -387,7 +380,7 @@ cifs_call_async(struct TCP_Server_Info *server, struct smb_hdr *in_buf,
 #ifdef CONFIG_CIFS_STATS2
 	atomic_inc(&server->inSend);
 #endif
-	rc = smb_send(server, in_buf, in_buf->smb_buf_length);
+	rc = smb_send(server, in_buf, be32_to_cpu(in_buf->smb_buf_length));
 #ifdef CONFIG_CIFS_STATS2
 	atomic_dec(&server->inSend);
 	mid->when_sent = jiffies;
@@ -422,7 +415,7 @@ SendReceiveNoRsp(const unsigned int xid, struct cifsSesInfo *ses,
 	int resp_buf_type;
 
 	iov[0].iov_base = (char *)in_buf;
-	iov[0].iov_len = in_buf->smb_buf_length + 4;
+	iov[0].iov_len = be32_to_cpu(in_buf->smb_buf_length) + 4;
 	flags |= CIFS_NO_RESP;
 	rc = SendReceive2(xid, ses, iov, 1, &resp_buf_type, flags);
 	cFYI(DBG2, "SendRcvNoRsp flags %d rc %d", flags, rc);
@@ -488,10 +481,10 @@ send_nt_cancel(struct TCP_Server_Info *server, struct smb_hdr *in_buf,
 	int rc = 0;
 
 	/* -4 for RFC1001 length and +2 for BCC field */
-	in_buf->smb_buf_length = sizeof(struct smb_hdr) - 4  + 2;
+	in_buf->smb_buf_length = cpu_to_be32(sizeof(struct smb_hdr) - 4  + 2);
 	in_buf->Command = SMB_COM_NT_CANCEL;
 	in_buf->WordCount = 0;
-	put_bcc_le(0, in_buf);
+	put_bcc(0, in_buf);
 
 	mutex_lock(&server->srv_mutex);
 	rc = cifs_sign_smb(in_buf, server, &mid->sequence_number);
@@ -499,7 +492,7 @@ send_nt_cancel(struct TCP_Server_Info *server, struct smb_hdr *in_buf,
 		mutex_unlock(&server->srv_mutex);
 		return rc;
 	}
-	rc = smb_send(server, in_buf, in_buf->smb_buf_length);
+	rc = smb_send(server, in_buf, be32_to_cpu(in_buf->smb_buf_length));
 	mutex_unlock(&server->srv_mutex);
 
 	cFYI(1, "issued NT_CANCEL for mid %u, rc = %d",
@@ -612,7 +605,7 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses,
 		return rc;
 	}
 
-	receive_len = midQ->resp_buf->smb_buf_length;
+	receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length);
 
 	if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) {
 		cERROR(1, "Frame too large received.  Length: %d  Xid: %d",
@@ -651,11 +644,6 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses,
 		rc = map_smb_to_linux_error(midQ->resp_buf,
 					    flags & CIFS_LOG_ERROR);
 
-		/* convert ByteCount if necessary */
-		if (receive_len >= sizeof(struct smb_hdr) - 4
-		    /* do not count RFC1001 header */  +
-		    (2 * midQ->resp_buf->WordCount) + 2 /* bcc */ )
-			put_bcc(get_bcc_le(midQ->resp_buf), midQ->resp_buf);
 		if ((flags & CIFS_NO_RESP) == 0)
 			midQ->resp_buf = NULL;  /* mark it so buf will
 						   not be freed by
@@ -698,9 +686,10 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses,
 	   to the same server. We may make this configurable later or
 	   use ses->maxReq */
 
-	if (in_buf->smb_buf_length > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
+	if (be32_to_cpu(in_buf->smb_buf_length) > CIFSMaxBufSize +
+			MAX_CIFS_HDR_SIZE - 4) {
 		cERROR(1, "Illegal length, greater than maximum frame, %d",
-			   in_buf->smb_buf_length);
+			   be32_to_cpu(in_buf->smb_buf_length));
 		return -EIO;
 	}
 
@@ -733,7 +722,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses,
 #ifdef CONFIG_CIFS_STATS2
 	atomic_inc(&ses->server->inSend);
 #endif
-	rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length);
+	rc = smb_send(ses->server, in_buf, be32_to_cpu(in_buf->smb_buf_length));
 #ifdef CONFIG_CIFS_STATS2
 	atomic_dec(&ses->server->inSend);
 	midQ->when_sent = jiffies;
@@ -768,7 +757,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses,
 		return rc;
 	}
 
-	receive_len = midQ->resp_buf->smb_buf_length;
+	receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length);
 
 	if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) {
 		cERROR(1, "Frame too large received.  Length: %d  Xid: %d",
@@ -781,7 +770,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses,
 
 	if (midQ->resp_buf && out_buf
 	    && (midQ->midState == MID_RESPONSE_RECEIVED)) {
-		out_buf->smb_buf_length = receive_len;
+		out_buf->smb_buf_length = cpu_to_be32(receive_len);
 		memcpy((char *)out_buf + 4,
 		       (char *)midQ->resp_buf + 4,
 		       receive_len);
@@ -800,16 +789,10 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses,
 			}
 		}
 
-		*pbytes_returned = out_buf->smb_buf_length;
+		*pbytes_returned = be32_to_cpu(out_buf->smb_buf_length);
 
 		/* BB special case reconnect tid and uid here? */
 		rc = map_smb_to_linux_error(out_buf, 0 /* no log */ );
-
-		/* convert ByteCount if necessary */
-		if (receive_len >= sizeof(struct smb_hdr) - 4
-		    /* do not count RFC1001 header */  +
-		    (2 * out_buf->WordCount) + 2 /* bcc */ )
-			put_bcc(get_bcc_le(midQ->resp_buf), midQ->resp_buf);
 	} else {
 		rc = -EIO;
 		cERROR(1, "Bad MID state?");
@@ -877,9 +860,10 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon,
 	   to the same server. We may make this configurable later or
 	   use ses->maxReq */
 
-	if (in_buf->smb_buf_length > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
+	if (be32_to_cpu(in_buf->smb_buf_length) > CIFSMaxBufSize +
+			MAX_CIFS_HDR_SIZE - 4) {
 		cERROR(1, "Illegal length, greater than maximum frame, %d",
-			   in_buf->smb_buf_length);
+			   be32_to_cpu(in_buf->smb_buf_length));
 		return -EIO;
 	}
 
@@ -910,7 +894,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon,
 #ifdef CONFIG_CIFS_STATS2
 	atomic_inc(&ses->server->inSend);
 #endif
-	rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length);
+	rc = smb_send(ses->server, in_buf, be32_to_cpu(in_buf->smb_buf_length));
 #ifdef CONFIG_CIFS_STATS2
 	atomic_dec(&ses->server->inSend);
 	midQ->when_sent = jiffies;
@@ -977,7 +961,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon,
 	if (rc != 0)
 		return rc;
 
-	receive_len = midQ->resp_buf->smb_buf_length;
+	receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length);
 	if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) {
 		cERROR(1, "Frame too large received.  Length: %d  Xid: %d",
 			receive_len, xid);
@@ -993,7 +977,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon,
 		goto out;
 	}
 
-	out_buf->smb_buf_length = receive_len;
+	out_buf->smb_buf_length = cpu_to_be32(receive_len);
 	memcpy((char *)out_buf + 4,
 	       (char *)midQ->resp_buf + 4,
 	       receive_len);
@@ -1012,17 +996,11 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon,
 		}
 	}
 
-	*pbytes_returned = out_buf->smb_buf_length;
+	*pbytes_returned = be32_to_cpu(out_buf->smb_buf_length);
 
 	/* BB special case reconnect tid and uid here? */
 	rc = map_smb_to_linux_error(out_buf, 0 /* no log */ );
 
-	/* convert ByteCount if necessary */
-	if (receive_len >= sizeof(struct smb_hdr) - 4
-	    /* do not count RFC1001 header */  +
-	    (2 * out_buf->WordCount) + 2 /* bcc */ )
-		put_bcc(get_bcc_le(out_buf), out_buf);
-
 out:
 	delete_mid(midQ);
 	if (rstart && rc == -EACCES)
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index eae2a149160..912995e013e 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -112,6 +112,7 @@ int cifs_setxattr(struct dentry *direntry, const char *ea_name,
 	struct cifsTconInfo *pTcon;
 	struct super_block *sb;
 	char *full_path;
+	struct cifs_ntsd *pacl;
 
 	if (direntry == NULL)
 		return -EIO;
@@ -166,6 +167,25 @@ int cifs_setxattr(struct dentry *direntry, const char *ea_name,
 		rc = CIFSSMBSetEA(xid, pTcon, full_path, ea_name, ea_value,
 			(__u16)value_size, cifs_sb->local_nls,
 			cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+	} else if (strncmp(ea_name, CIFS_XATTR_CIFS_ACL,
+			strlen(CIFS_XATTR_CIFS_ACL)) == 0) {
+		pacl = kmalloc(value_size, GFP_KERNEL);
+		if (!pacl) {
+			cFYI(1, "%s: Can't allocate memory for ACL",
+					__func__);
+			rc = -ENOMEM;
+		} else {
+#ifdef CONFIG_CIFS_ACL
+			memcpy(pacl, ea_value, value_size);
+			rc = set_cifs_acl(pacl, value_size,
+				direntry->d_inode, full_path);
+			if (rc == 0) /* force revalidate of the inode */
+				CIFS_I(direntry->d_inode)->time = 0;
+			kfree(pacl);
+#else
+			cFYI(1, "Set CIFS ACL not supported yet");
+#endif /* CONFIG_CIFS_ACL */
+		}
 	} else {
 		int temp;
 		temp = strncmp(ea_name, POSIX_ACL_XATTR_ACCESS,
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 90ff3cb10de..9a37a9b6de3 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -53,11 +53,14 @@ DEFINE_SPINLOCK(configfs_dirent_lock);
 static void configfs_d_iput(struct dentry * dentry,
 			    struct inode * inode)
 {
-	struct configfs_dirent * sd = dentry->d_fsdata;
+	struct configfs_dirent *sd = dentry->d_fsdata;
 
 	if (sd) {
 		BUG_ON(sd->s_dentry != dentry);
+		/* Coordinate with configfs_readdir */
+		spin_lock(&configfs_dirent_lock);
 		sd->s_dentry = NULL;
+		spin_unlock(&configfs_dirent_lock);
 		configfs_put(sd);
 	}
 	iput(inode);
@@ -689,7 +692,8 @@ static int create_default_group(struct config_group *parent_group,
 			sd = child->d_fsdata;
 			sd->s_type |= CONFIGFS_USET_DEFAULT;
 		} else {
-			d_delete(child);
+			BUG_ON(child->d_inode);
+			d_drop(child);
 			dput(child);
 		}
 	}
@@ -990,7 +994,7 @@ static int configfs_dump(struct configfs_dirent *sd, int level)
  * This describes these functions and their helpers.
  *
  * Allow another kernel system to depend on a config_item.  If this
- * happens, the item cannot go away until the dependant can live without
+ * happens, the item cannot go away until the dependent can live without
  * it.  The idea is to give client modules as simple an interface as
  * possible.  When a system asks them to depend on an item, they just
  * call configfs_depend_item().  If the item is live and the client
@@ -1545,7 +1549,7 @@ static int configfs_readdir(struct file * filp, void * dirent, filldir_t filldir
 	struct configfs_dirent * parent_sd = dentry->d_fsdata;
 	struct configfs_dirent *cursor = filp->private_data;
 	struct list_head *p, *q = &cursor->s_sibling;
-	ino_t ino;
+	ino_t ino = 0;
 	int i = filp->f_pos;
 
 	switch (i) {
@@ -1573,6 +1577,7 @@ static int configfs_readdir(struct file * filp, void * dirent, filldir_t filldir
 				struct configfs_dirent *next;
 				const char * name;
 				int len;
+				struct inode *inode = NULL;
 
 				next = list_entry(p, struct configfs_dirent,
 						   s_sibling);
@@ -1581,9 +1586,28 @@ static int configfs_readdir(struct file * filp, void * dirent, filldir_t filldir
 
 				name = configfs_get_name(next);
 				len = strlen(name);
-				if (next->s_dentry)
-					ino = next->s_dentry->d_inode->i_ino;
-				else
+
+				/*
+				 * We'll have a dentry and an inode for
+				 * PINNED items and for open attribute
+				 * files.  We lock here to prevent a race
+				 * with configfs_d_iput() clearing
+				 * s_dentry before calling iput().
+				 *
+				 * Why do we go to the trouble?  If
+				 * someone has an attribute file open,
+				 * the inode number should match until
+				 * they close it.  Beyond that, we don't
+				 * care.
+				 */
+				spin_lock(&configfs_dirent_lock);
+				dentry = next->s_dentry;
+				if (dentry)
+					inode = dentry->d_inode;
+				if (inode)
+					ino = inode->i_ino;
+				spin_unlock(&configfs_dirent_lock);
+				if (!inode)
 					ino = iunique(configfs_sb, 2);
 
 				if (filldir(dirent, name, len, filp->f_pos, ino,
@@ -1683,7 +1707,8 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)
 		err = configfs_attach_group(sd->s_element, &group->cg_item,
 					    dentry);
 		if (err) {
-			d_delete(dentry);
+			BUG_ON(dentry->d_inode);
+			d_drop(dentry);
 			dput(dentry);
 		} else {
 			spin_lock(&configfs_dirent_lock);
diff --git a/fs/dcache.c b/fs/dcache.c
index ad25c4cec7d..18b2a1f10ed 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -35,6 +35,7 @@
 #include <linux/hardirq.h>
 #include <linux/bit_spinlock.h>
 #include <linux/rculist_bl.h>
+#include <linux/prefetch.h>
 #include "internal.h"
 
 /*
@@ -99,12 +100,9 @@ static struct kmem_cache *dentry_cache __read_mostly;
 static unsigned int d_hash_mask __read_mostly;
 static unsigned int d_hash_shift __read_mostly;
 
-struct dcache_hash_bucket {
-	struct hlist_bl_head head;
-};
-static struct dcache_hash_bucket *dentry_hashtable __read_mostly;
+static struct hlist_bl_head *dentry_hashtable __read_mostly;
 
-static inline struct dcache_hash_bucket *d_hash(struct dentry *parent,
+static inline struct hlist_bl_head *d_hash(struct dentry *parent,
 					unsigned long hash)
 {
 	hash += ((unsigned long) parent ^ GOLDEN_RATIO_PRIME) / L1_CACHE_BYTES;
@@ -112,16 +110,6 @@ static inline struct dcache_hash_bucket *d_hash(struct dentry *parent,
 	return dentry_hashtable + (hash & D_HASHMASK);
 }
 
-static inline void spin_lock_bucket(struct dcache_hash_bucket *b)
-{
-	bit_spin_lock(0, (unsigned long *)&b->head.first);
-}
-
-static inline void spin_unlock_bucket(struct dcache_hash_bucket *b)
-{
-	__bit_spin_unlock(0, (unsigned long *)&b->head.first);
-}
-
 /* Statistics gathering. */
 struct dentry_stat_t dentry_stat = {
 	.age_limit = 45,
@@ -167,8 +155,8 @@ static void d_free(struct dentry *dentry)
 	if (dentry->d_op && dentry->d_op->d_release)
 		dentry->d_op->d_release(dentry);
 
-	/* if dentry was never inserted into hash, immediate free is OK */
-	if (hlist_bl_unhashed(&dentry->d_hash))
+	/* if dentry was never visible to RCU, immediate free is OK */
+	if (!(dentry->d_flags & DCACHE_RCUACCESS))
 		__d_free(&dentry->d_u.d_rcu);
 	else
 		call_rcu(&dentry->d_u.d_rcu, __d_free);
@@ -330,28 +318,19 @@ static struct dentry *d_kill(struct dentry *dentry, struct dentry *parent)
  */
 void __d_drop(struct dentry *dentry)
 {
-	if (!(dentry->d_flags & DCACHE_UNHASHED)) {
-		if (unlikely(dentry->d_flags & DCACHE_DISCONNECTED)) {
-			bit_spin_lock(0,
-				(unsigned long *)&dentry->d_sb->s_anon.first);
-			dentry->d_flags |= DCACHE_UNHASHED;
-			hlist_bl_del_init(&dentry->d_hash);
-			__bit_spin_unlock(0,
-				(unsigned long *)&dentry->d_sb->s_anon.first);
-		} else {
-			struct dcache_hash_bucket *b;
+	if (!d_unhashed(dentry)) {
+		struct hlist_bl_head *b;
+		if (unlikely(dentry->d_flags & DCACHE_DISCONNECTED))
+			b = &dentry->d_sb->s_anon;
+		else
 			b = d_hash(dentry->d_parent, dentry->d_name.hash);
-			spin_lock_bucket(b);
-			/*
-			 * We may not actually need to put DCACHE_UNHASHED
-			 * manipulations under the hash lock, but follow
-			 * the principle of least surprise.
-			 */
-			dentry->d_flags |= DCACHE_UNHASHED;
-			hlist_bl_del_rcu(&dentry->d_hash);
-			spin_unlock_bucket(b);
-			dentry_rcuwalk_barrier(dentry);
-		}
+
+		hlist_bl_lock(b);
+		__hlist_bl_del(&dentry->d_hash);
+		dentry->d_hash.pprev = NULL;
+		hlist_bl_unlock(b);
+
+		dentry_rcuwalk_barrier(dentry);
 	}
 }
 EXPORT_SYMBOL(__d_drop);
@@ -1304,7 +1283,7 @@ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name)
 	dname[name->len] = 0;
 
 	dentry->d_count = 1;
-	dentry->d_flags = DCACHE_UNHASHED;
+	dentry->d_flags = 0;
 	spin_lock_init(&dentry->d_lock);
 	seqcount_init(&dentry->d_seq);
 	dentry->d_inode = NULL;
@@ -1606,10 +1585,9 @@ struct dentry *d_obtain_alias(struct inode *inode)
 	tmp->d_inode = inode;
 	tmp->d_flags |= DCACHE_DISCONNECTED;
 	list_add(&tmp->d_alias, &inode->i_dentry);
-	bit_spin_lock(0, (unsigned long *)&tmp->d_sb->s_anon.first);
-	tmp->d_flags &= ~DCACHE_UNHASHED;
+	hlist_bl_lock(&tmp->d_sb->s_anon);
 	hlist_bl_add_head(&tmp->d_hash, &tmp->d_sb->s_anon);
-	__bit_spin_unlock(0, (unsigned long *)&tmp->d_sb->s_anon.first);
+	hlist_bl_unlock(&tmp->d_sb->s_anon);
 	spin_unlock(&tmp->d_lock);
 	spin_unlock(&inode->i_lock);
 	security_d_instantiate(tmp, inode);
@@ -1789,7 +1767,7 @@ struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name,
 	unsigned int len = name->len;
 	unsigned int hash = name->hash;
 	const unsigned char *str = name->name;
-	struct dcache_hash_bucket *b = d_hash(parent, hash);
+	struct hlist_bl_head *b = d_hash(parent, hash);
 	struct hlist_bl_node *node;
 	struct dentry *dentry;
 
@@ -1813,7 +1791,7 @@ struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name,
 	 *
 	 * See Documentation/filesystems/path-lookup.txt for more details.
 	 */
-	hlist_bl_for_each_entry_rcu(dentry, node, &b->head, d_hash) {
+	hlist_bl_for_each_entry_rcu(dentry, node, b, d_hash) {
 		struct inode *i;
 		const char *tname;
 		int tlen;
@@ -1908,7 +1886,7 @@ struct dentry *__d_lookup(struct dentry *parent, struct qstr *name)
 	unsigned int len = name->len;
 	unsigned int hash = name->hash;
 	const unsigned char *str = name->name;
-	struct dcache_hash_bucket *b = d_hash(parent, hash);
+	struct hlist_bl_head *b = d_hash(parent, hash);
 	struct hlist_bl_node *node;
 	struct dentry *found = NULL;
 	struct dentry *dentry;
@@ -1935,7 +1913,7 @@ struct dentry *__d_lookup(struct dentry *parent, struct qstr *name)
 	 */
 	rcu_read_lock();
 	
-	hlist_bl_for_each_entry_rcu(dentry, node, &b->head, d_hash) {
+	hlist_bl_for_each_entry_rcu(dentry, node, b, d_hash) {
 		const char *tname;
 		int tlen;
 
@@ -2086,13 +2064,13 @@ again:
 }
 EXPORT_SYMBOL(d_delete);
 
-static void __d_rehash(struct dentry * entry, struct dcache_hash_bucket *b)
+static void __d_rehash(struct dentry * entry, struct hlist_bl_head *b)
 {
 	BUG_ON(!d_unhashed(entry));
-	spin_lock_bucket(b);
- 	entry->d_flags &= ~DCACHE_UNHASHED;
-	hlist_bl_add_head_rcu(&entry->d_hash, &b->head);
-	spin_unlock_bucket(b);
+	hlist_bl_lock(b);
+	entry->d_flags |= DCACHE_RCUACCESS;
+	hlist_bl_add_head_rcu(&entry->d_hash, b);
+	hlist_bl_unlock(b);
 }
 
 static void _d_rehash(struct dentry * entry)
@@ -2131,7 +2109,7 @@ EXPORT_SYMBOL(d_rehash);
  */
 void dentry_update_name_case(struct dentry *dentry, struct qstr *name)
 {
-	BUG_ON(!mutex_is_locked(&dentry->d_inode->i_mutex));
+	BUG_ON(!mutex_is_locked(&dentry->d_parent->d_inode->i_mutex));
 	BUG_ON(dentry->d_name.len != name->len); /* d_lookup gives this */
 
 	spin_lock(&dentry->d_lock);
@@ -3025,7 +3003,7 @@ static void __init dcache_init_early(void)
 
 	dentry_hashtable =
 		alloc_large_system_hash("Dentry cache",
-					sizeof(struct dcache_hash_bucket),
+					sizeof(struct hlist_bl_head),
 					dhash_entries,
 					13,
 					HASH_EARLY,
@@ -3034,7 +3012,7 @@ static void __init dcache_init_early(void)
 					0);
 
 	for (loop = 0; loop < (1 << d_hash_shift); loop++)
-		INIT_HLIST_BL_HEAD(&dentry_hashtable[loop].head);
+		INIT_HLIST_BL_HEAD(dentry_hashtable + loop);
 }
 
 static void __init dcache_init(void)
@@ -3057,7 +3035,7 @@ static void __init dcache_init(void)
 
 	dentry_hashtable =
 		alloc_large_system_hash("Dentry cache",
-					sizeof(struct dcache_hash_bucket),
+					sizeof(struct hlist_bl_head),
 					dhash_entries,
 					13,
 					0,
@@ -3066,7 +3044,7 @@ static void __init dcache_init(void)
 					0);
 
 	for (loop = 0; loop < (1 << d_hash_shift); loop++)
-		INIT_HLIST_BL_HEAD(&dentry_hashtable[loop].head);
+		INIT_HLIST_BL_HEAD(dentry_hashtable + loop);
 }
 
 /* SLAB cache for __getname() consumers */
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 89d394d8fe2..90f76575c05 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -428,26 +428,17 @@ static ssize_t write_file_bool(struct file *file, const char __user *user_buf,
 			       size_t count, loff_t *ppos)
 {
 	char buf[32];
-	int buf_size;
+	size_t buf_size;
+	bool bv;
 	u32 *val = file->private_data;
 
 	buf_size = min(count, (sizeof(buf)-1));
 	if (copy_from_user(buf, user_buf, buf_size))
 		return -EFAULT;
 
-	switch (buf[0]) {
-	case 'y':
-	case 'Y':
-	case '1':
-		*val = 1;
-		break;
-	case 'n':
-	case 'N':
-	case '0':
-		*val = 0;
-		break;
-	}
-	
+	if (strtobool(buf, &bv) == 0)
+		*val = bv;
+
 	return count;
 }
 
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 04b8c449303..56d6bfcc1e4 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -519,7 +519,7 @@ static void toss_rsb(struct kref *kref)
 	}
 }
 
-/* When all references to the rsb are gone it's transfered to
+/* When all references to the rsb are gone it's transferred to
    the tossed list for later disposal. */
 
 static void put_rsb(struct dlm_rsb *r)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index bffa1e73b9a..5e2c71f05e4 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -810,7 +810,7 @@ static int tcp_accept_from_sock(struct connection *con)
 
 	/*
 	 * Add it to the active queue in case we got data
-	 * beween processing the accept adding the socket
+	 * between processing the accept adding the socket
 	 * to the read_sockets list
 	 */
 	if (!test_and_set_bit(CF_READ_PENDING, &addcon->flags))
diff --git a/fs/dlm/recover.c b/fs/dlm/recover.c
index eda43f36261..14638235f7b 100644
--- a/fs/dlm/recover.c
+++ b/fs/dlm/recover.c
@@ -304,7 +304,7 @@ static void set_master_lkbs(struct dlm_rsb *r)
 }
 
 /*
- * Propogate the new master nodeid to locks
+ * Propagate the new master nodeid to locks
  * The NEW_MASTER flag tells dlm_recover_locks() which rsb's to consider.
  * The NEW_MASTER2 flag tells recover_lvb() and set_locks_purged() which
  * rsb's to consider.
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index d2a70a4561f..b8d5c809102 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -1452,6 +1452,25 @@ static void set_default_header_data(struct ecryptfs_crypt_stat *crypt_stat)
 	crypt_stat->metadata_size = ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE;
 }
 
+void ecryptfs_i_size_init(const char *page_virt, struct inode *inode)
+{
+	struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
+	struct ecryptfs_crypt_stat *crypt_stat;
+	u64 file_size;
+
+	crypt_stat = &ecryptfs_inode_to_private(inode)->crypt_stat;
+	mount_crypt_stat =
+		&ecryptfs_superblock_to_private(inode->i_sb)->mount_crypt_stat;
+	if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED) {
+		file_size = i_size_read(ecryptfs_inode_to_lower(inode));
+		if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
+			file_size += crypt_stat->metadata_size;
+	} else
+		file_size = get_unaligned_be64(page_virt);
+	i_size_write(inode, (loff_t)file_size);
+	crypt_stat->flags |= ECRYPTFS_I_SIZE_INITIALIZED;
+}
+
 /**
  * ecryptfs_read_headers_virt
  * @page_virt: The virtual address into which to read the headers
@@ -1482,6 +1501,8 @@ static int ecryptfs_read_headers_virt(char *page_virt,
 		rc = -EINVAL;
 		goto out;
 	}
+	if (!(crypt_stat->flags & ECRYPTFS_I_SIZE_INITIALIZED))
+		ecryptfs_i_size_init(page_virt, ecryptfs_dentry->d_inode);
 	offset += MAGIC_ECRYPTFS_MARKER_SIZE_BYTES;
 	rc = ecryptfs_process_flags(crypt_stat, (page_virt + offset),
 				    &bytes_read);
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index bd3cafd0949..e70282775e2 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -269,6 +269,7 @@ struct ecryptfs_crypt_stat {
 #define ECRYPTFS_ENCFN_USE_MOUNT_FNEK 0x00000800
 #define ECRYPTFS_ENCFN_USE_FEK        0x00001000
 #define ECRYPTFS_UNLINK_SIGS          0x00002000
+#define ECRYPTFS_I_SIZE_INITIALIZED   0x00004000
 	u32 flags;
 	unsigned int file_version;
 	size_t iv_bytes;
@@ -295,6 +296,8 @@ struct ecryptfs_crypt_stat {
 struct ecryptfs_inode_info {
 	struct inode vfs_inode;
 	struct inode *wii_inode;
+	struct mutex lower_file_mutex;
+	atomic_t lower_file_count;
 	struct file *lower_file;
 	struct ecryptfs_crypt_stat crypt_stat;
 };
@@ -626,6 +629,7 @@ struct ecryptfs_open_req {
 int ecryptfs_interpose(struct dentry *hidden_dentry,
 		       struct dentry *this_dentry, struct super_block *sb,
 		       u32 flags);
+void ecryptfs_i_size_init(const char *page_virt, struct inode *inode);
 int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 					struct dentry *lower_dentry,
 					struct inode *ecryptfs_dir_inode);
@@ -757,7 +761,8 @@ int ecryptfs_privileged_open(struct file **lower_file,
 			     struct dentry *lower_dentry,
 			     struct vfsmount *lower_mnt,
 			     const struct cred *cred);
-int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry);
+int ecryptfs_get_lower_file(struct dentry *ecryptfs_dentry);
+void ecryptfs_put_lower_file(struct inode *inode);
 int
 ecryptfs_write_tag_70_packet(char *dest, size_t *remaining_bytes,
 			     size_t *packet_size,
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index cedc913d11b..566e5472f78 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -191,10 +191,10 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
 				      | ECRYPTFS_ENCRYPTED);
 	}
 	mutex_unlock(&crypt_stat->cs_mutex);
-	rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
+	rc = ecryptfs_get_lower_file(ecryptfs_dentry);
 	if (rc) {
 		printk(KERN_ERR "%s: Error attempting to initialize "
-			"the persistent file for the dentry with name "
+			"the lower file for the dentry with name "
 			"[%s]; rc = [%d]\n", __func__,
 			ecryptfs_dentry->d_name.name, rc);
 		goto out_free;
@@ -202,9 +202,9 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
 	if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_ACCMODE)
 	    == O_RDONLY && (file->f_flags & O_ACCMODE) != O_RDONLY) {
 		rc = -EPERM;
-		printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
+		printk(KERN_WARNING "%s: Lower file is RO; eCryptfs "
 		       "file must hence be opened RO\n", __func__);
-		goto out_free;
+		goto out_put;
 	}
 	ecryptfs_set_file_lower(
 		file, ecryptfs_inode_to_private(inode)->lower_file);
@@ -232,10 +232,11 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
 				       "Plaintext passthrough mode is not "
 				       "enabled; returning -EIO\n");
 				mutex_unlock(&crypt_stat->cs_mutex);
-				goto out_free;
+				goto out_put;
 			}
 			rc = 0;
-			crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
+			crypt_stat->flags &= ~(ECRYPTFS_I_SIZE_INITIALIZED
+					       | ECRYPTFS_ENCRYPTED);
 			mutex_unlock(&crypt_stat->cs_mutex);
 			goto out;
 		}
@@ -245,6 +246,8 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
 			"[0x%.16lx] size: [0x%.16llx]\n", inode, inode->i_ino,
 			(unsigned long long)i_size_read(inode));
 	goto out;
+out_put:
+	ecryptfs_put_lower_file(inode);
 out_free:
 	kmem_cache_free(ecryptfs_file_info_cache,
 			ecryptfs_file_to_private(file));
@@ -254,17 +257,13 @@ out:
 
 static int ecryptfs_flush(struct file *file, fl_owner_t td)
 {
-	int rc = 0;
-	struct file *lower_file = NULL;
-
-	lower_file = ecryptfs_file_to_lower(file);
-	if (lower_file->f_op && lower_file->f_op->flush)
-		rc = lower_file->f_op->flush(lower_file, td);
-	return rc;
+	return file->f_mode & FMODE_WRITE
+	       ? filemap_write_and_wait(file->f_mapping) : 0;
 }
 
 static int ecryptfs_release(struct inode *inode, struct file *file)
 {
+	ecryptfs_put_lower_file(inode);
 	kmem_cache_free(ecryptfs_file_info_cache,
 			ecryptfs_file_to_private(file));
 	return 0;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index f99051b7ada..4d4cc6a90cd 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -168,19 +168,18 @@ static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry)
 				"context; rc = [%d]\n", rc);
 		goto out;
 	}
-	rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
+	rc = ecryptfs_get_lower_file(ecryptfs_dentry);
 	if (rc) {
 		printk(KERN_ERR "%s: Error attempting to initialize "
-			"the persistent file for the dentry with name "
+			"the lower file for the dentry with name "
 			"[%s]; rc = [%d]\n", __func__,
 			ecryptfs_dentry->d_name.name, rc);
 		goto out;
 	}
 	rc = ecryptfs_write_metadata(ecryptfs_dentry);
-	if (rc) {
+	if (rc)
 		printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc);
-		goto out;
-	}
+	ecryptfs_put_lower_file(ecryptfs_dentry->d_inode);
 out:
 	return rc;
 }
@@ -226,11 +225,9 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 	struct dentry *lower_dir_dentry;
 	struct vfsmount *lower_mnt;
 	struct inode *lower_inode;
-	struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
 	struct ecryptfs_crypt_stat *crypt_stat;
 	char *page_virt = NULL;
-	u64 file_size;
-	int rc = 0;
+	int put_lower = 0, rc = 0;
 
 	lower_dir_dentry = lower_dentry->d_parent;
 	lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(
@@ -277,14 +274,15 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 		rc = -ENOMEM;
 		goto out;
 	}
-	rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
+	rc = ecryptfs_get_lower_file(ecryptfs_dentry);
 	if (rc) {
 		printk(KERN_ERR "%s: Error attempting to initialize "
-			"the persistent file for the dentry with name "
+			"the lower file for the dentry with name "
 			"[%s]; rc = [%d]\n", __func__,
 			ecryptfs_dentry->d_name.name, rc);
 		goto out_free_kmem;
 	}
+	put_lower = 1;
 	crypt_stat = &ecryptfs_inode_to_private(
 					ecryptfs_dentry->d_inode)->crypt_stat;
 	/* TODO: lock for crypt_stat comparison */
@@ -302,18 +300,7 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 		}
 		crypt_stat->flags |= ECRYPTFS_METADATA_IN_XATTR;
 	}
-	mount_crypt_stat = &ecryptfs_superblock_to_private(
-		ecryptfs_dentry->d_sb)->mount_crypt_stat;
-	if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED) {
-		if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
-			file_size = (crypt_stat->metadata_size
-				     + i_size_read(lower_dentry->d_inode));
-		else
-			file_size = i_size_read(lower_dentry->d_inode);
-	} else {
-		file_size = get_unaligned_be64(page_virt);
-	}
-	i_size_write(ecryptfs_dentry->d_inode, (loff_t)file_size);
+	ecryptfs_i_size_init(page_virt, ecryptfs_dentry->d_inode);
 out_free_kmem:
 	kmem_cache_free(ecryptfs_header_cache_2, page_virt);
 	goto out;
@@ -322,6 +309,8 @@ out_put:
 	mntput(lower_mnt);
 	d_drop(ecryptfs_dentry);
 out:
+	if (put_lower)
+		ecryptfs_put_lower_file(ecryptfs_dentry->d_inode);
 	return rc;
 }
 
@@ -538,8 +527,6 @@ static int ecryptfs_rmdir(struct inode *dir, struct dentry *dentry)
 	dget(lower_dentry);
 	rc = vfs_rmdir(lower_dir_dentry->d_inode, lower_dentry);
 	dput(lower_dentry);
-	if (!rc)
-		d_delete(lower_dentry);
 	fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
 	dir->i_nlink = lower_dir_dentry->d_inode->i_nlink;
 	unlock_dir(lower_dir_dentry);
@@ -610,8 +597,8 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode);
 out_lock:
 	unlock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
-	dput(lower_new_dentry->d_parent);
-	dput(lower_old_dentry->d_parent);
+	dput(lower_new_dir_dentry);
+	dput(lower_old_dir_dentry);
 	dput(lower_new_dentry);
 	dput(lower_old_dentry);
 	return rc;
@@ -759,8 +746,11 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia,
 
 	if (unlikely((ia->ia_size == i_size))) {
 		lower_ia->ia_valid &= ~ATTR_SIZE;
-		goto out;
+		return 0;
 	}
+	rc = ecryptfs_get_lower_file(dentry);
+	if (rc)
+		return rc;
 	crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
 	/* Switch on growing or shrinking file */
 	if (ia->ia_size > i_size) {
@@ -838,6 +828,7 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia,
 			lower_ia->ia_valid &= ~ATTR_SIZE;
 	}
 out:
+	ecryptfs_put_lower_file(inode);
 	return rc;
 }
 
@@ -913,7 +904,13 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 
 		mount_crypt_stat = &ecryptfs_superblock_to_private(
 			dentry->d_sb)->mount_crypt_stat;
+		rc = ecryptfs_get_lower_file(dentry);
+		if (rc) {
+			mutex_unlock(&crypt_stat->cs_mutex);
+			goto out;
+		}
 		rc = ecryptfs_read_metadata(dentry);
+		ecryptfs_put_lower_file(inode);
 		if (rc) {
 			if (!(mount_crypt_stat->flags
 			      & ECRYPTFS_PLAINTEXT_PASSTHROUGH_ENABLED)) {
@@ -927,10 +924,17 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 				goto out;
 			}
 			rc = 0;
-			crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
+			crypt_stat->flags &= ~(ECRYPTFS_I_SIZE_INITIALIZED
+					       | ECRYPTFS_ENCRYPTED);
 		}
 	}
 	mutex_unlock(&crypt_stat->cs_mutex);
+	if (S_ISREG(inode->i_mode)) {
+		rc = filemap_write_and_wait(inode->i_mapping);
+		if (rc)
+			goto out;
+		fsstack_copy_attr_all(inode, lower_inode);
+	}
 	memcpy(&lower_ia, ia, sizeof(lower_ia));
 	if (ia->ia_valid & ATTR_FILE)
 		lower_ia.ia_file = ecryptfs_file_to_lower(ia->ia_file);
diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c
index 0851ab6980f..69f994a7d52 100644
--- a/fs/ecryptfs/kthread.c
+++ b/fs/ecryptfs/kthread.c
@@ -44,7 +44,7 @@ static struct task_struct *ecryptfs_kthread;
  * @ignored: ignored
  *
  * The eCryptfs kernel thread that has the responsibility of getting
- * the lower persistent file with RW permissions.
+ * the lower file with RW permissions.
  *
  * Returns zero on success; non-zero otherwise
  */
@@ -141,8 +141,8 @@ int ecryptfs_privileged_open(struct file **lower_file,
 	int rc = 0;
 
 	/* Corresponding dput() and mntput() are done when the
-	 * persistent file is fput() when the eCryptfs inode is
-	 * destroyed. */
+	 * lower file is fput() when all eCryptfs files for the inode are
+	 * released. */
 	dget(lower_dentry);
 	mntget(lower_mnt);
 	flags |= IS_RDONLY(lower_dentry->d_inode) ? O_RDONLY : O_RDWR;
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index c27c0ecf90b..89b93389af8 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -96,7 +96,7 @@ void __ecryptfs_printk(const char *fmt, ...)
 }
 
 /**
- * ecryptfs_init_persistent_file
+ * ecryptfs_init_lower_file
  * @ecryptfs_dentry: Fully initialized eCryptfs dentry object, with
  *                   the lower dentry and the lower mount set
  *
@@ -104,42 +104,70 @@ void __ecryptfs_printk(const char *fmt, ...)
  * inode. All I/O operations to the lower inode occur through that
  * file. When the first eCryptfs dentry that interposes with the first
  * lower dentry for that inode is created, this function creates the
- * persistent file struct and associates it with the eCryptfs
- * inode. When the eCryptfs inode is destroyed, the file is closed.
+ * lower file struct and associates it with the eCryptfs
+ * inode. When all eCryptfs files associated with the inode are released, the
+ * file is closed.
  *
- * The persistent file will be opened with read/write permissions, if
+ * The lower file will be opened with read/write permissions, if
  * possible. Otherwise, it is opened read-only.
  *
- * This function does nothing if a lower persistent file is already
+ * This function does nothing if a lower file is already
  * associated with the eCryptfs inode.
  *
  * Returns zero on success; non-zero otherwise
  */
-int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry)
+static int ecryptfs_init_lower_file(struct dentry *dentry,
+				    struct file **lower_file)
 {
 	const struct cred *cred = current_cred();
-	struct ecryptfs_inode_info *inode_info =
-		ecryptfs_inode_to_private(ecryptfs_dentry->d_inode);
-	int rc = 0;
+	struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+	struct vfsmount *lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
+	int rc;
 
-	if (!inode_info->lower_file) {
-		struct dentry *lower_dentry;
-		struct vfsmount *lower_mnt =
-			ecryptfs_dentry_to_lower_mnt(ecryptfs_dentry);
+	rc = ecryptfs_privileged_open(lower_file, lower_dentry, lower_mnt,
+				      cred);
+	if (rc) {
+		printk(KERN_ERR "Error opening lower file "
+		       "for lower_dentry [0x%p] and lower_mnt [0x%p]; "
+		       "rc = [%d]\n", lower_dentry, lower_mnt, rc);
+		(*lower_file) = NULL;
+	}
+	return rc;
+}
 
-		lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
-		rc = ecryptfs_privileged_open(&inode_info->lower_file,
-					      lower_dentry, lower_mnt, cred);
-		if (rc) {
-			printk(KERN_ERR "Error opening lower persistent file "
-			       "for lower_dentry [0x%p] and lower_mnt [0x%p]; "
-			       "rc = [%d]\n", lower_dentry, lower_mnt, rc);
-			inode_info->lower_file = NULL;
-		}
+int ecryptfs_get_lower_file(struct dentry *dentry)
+{
+	struct ecryptfs_inode_info *inode_info =
+		ecryptfs_inode_to_private(dentry->d_inode);
+	int count, rc = 0;
+
+	mutex_lock(&inode_info->lower_file_mutex);
+	count = atomic_inc_return(&inode_info->lower_file_count);
+	if (WARN_ON_ONCE(count < 1))
+		rc = -EINVAL;
+	else if (count == 1) {
+		rc = ecryptfs_init_lower_file(dentry,
+					      &inode_info->lower_file);
+		if (rc)
+			atomic_set(&inode_info->lower_file_count, 0);
 	}
+	mutex_unlock(&inode_info->lower_file_mutex);
 	return rc;
 }
 
+void ecryptfs_put_lower_file(struct inode *inode)
+{
+	struct ecryptfs_inode_info *inode_info;
+
+	inode_info = ecryptfs_inode_to_private(inode);
+	if (atomic_dec_and_mutex_lock(&inode_info->lower_file_count,
+				      &inode_info->lower_file_mutex)) {
+		fput(inode_info->lower_file);
+		inode_info->lower_file = NULL;
+		mutex_unlock(&inode_info->lower_file_mutex);
+	}
+}
+
 static struct inode *ecryptfs_get_inode(struct inode *lower_inode,
 		       struct super_block *sb)
 {
@@ -276,7 +304,7 @@ static void ecryptfs_init_mount_crypt_stat(
 /**
  * ecryptfs_parse_options
  * @sb: The ecryptfs super block
- * @options: The options pased to the kernel
+ * @options: The options passed to the kernel
  *
  * Parse mount options:
  * debug=N 	   - ecryptfs_verbosity level for debug output
@@ -840,7 +868,7 @@ static int __init ecryptfs_init(void)
 	}
 	rc = ecryptfs_init_messaging();
 	if (rc) {
-		printk(KERN_ERR "Failure occured while attempting to "
+		printk(KERN_ERR "Failure occurred while attempting to "
 				"initialize the communications channel to "
 				"ecryptfsd\n");
 		goto out_destroy_kthread;
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index bacc882e1ae..245b517bf1b 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -55,6 +55,8 @@ static struct inode *ecryptfs_alloc_inode(struct super_block *sb)
 	if (unlikely(!inode_info))
 		goto out;
 	ecryptfs_init_crypt_stat(&inode_info->crypt_stat);
+	mutex_init(&inode_info->lower_file_mutex);
+	atomic_set(&inode_info->lower_file_count, 0);
 	inode_info->lower_file = NULL;
 	inode = &inode_info->vfs_inode;
 out:
@@ -77,8 +79,7 @@ static void ecryptfs_i_callback(struct rcu_head *head)
  *
  * This is used during the final destruction of the inode.  All
  * allocation of memory related to the inode, including allocated
- * memory in the crypt_stat struct, will be released here. This
- * function also fput()'s the persistent file for the lower inode.
+ * memory in the crypt_stat struct, will be released here.
  * There should be no chance that this deallocation will be missed.
  */
 static void ecryptfs_destroy_inode(struct inode *inode)
@@ -86,16 +87,7 @@ static void ecryptfs_destroy_inode(struct inode *inode)
 	struct ecryptfs_inode_info *inode_info;
 
 	inode_info = ecryptfs_inode_to_private(inode);
-	if (inode_info->lower_file) {
-		struct dentry *lower_dentry =
-			inode_info->lower_file->f_dentry;
-
-		BUG_ON(!lower_dentry);
-		if (lower_dentry->d_inode) {
-			fput(inode_info->lower_file);
-			inode_info->lower_file = NULL;
-		}
-	}
+	BUG_ON(inode_info->lower_file);
 	ecryptfs_destroy_crypt_stat(&inode_info->crypt_stat);
 	call_rcu(&inode->i_rcu, ecryptfs_i_callback);
 }
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index ed38801b57a..f9cfd168fbe 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -181,7 +181,7 @@ struct eventpoll {
 
 	/*
 	 * This is a single linked list that chains all the "struct epitem" that
-	 * happened while transfering ready events to userspace w/out
+	 * happened while transferring ready events to userspace w/out
 	 * holding ->lock.
 	 */
 	struct epitem *ovflist;
@@ -606,7 +606,7 @@ static void ep_free(struct eventpoll *ep)
 	 * We do not need to hold "ep->mtx" here because the epoll file
 	 * is on the way to be removed and no one has references to it
 	 * anymore. The only hit might come from eventpoll_release_file() but
-	 * holding "epmutex" is sufficent here.
+	 * holding "epmutex" is sufficient here.
 	 */
 	mutex_lock(&epmutex);
 
@@ -720,7 +720,7 @@ void eventpoll_release_file(struct file *file)
 	/*
 	 * We don't want to get "file->f_lock" because it is not
 	 * necessary. It is not necessary because we're in the "struct file"
-	 * cleanup path, and this means that noone is using this file anymore.
+	 * cleanup path, and this means that no one is using this file anymore.
 	 * So, for example, epoll_ctl() cannot hit here since if we reach this
 	 * point, the file counter already went to zero and fget() would fail.
 	 * The only hit might come from ep_free() but by holding the mutex
@@ -1112,7 +1112,7 @@ static int ep_send_events_proc(struct eventpoll *ep, struct list_head *head,
 				 * Trigger mode, we need to insert back inside
 				 * the ready list, so that the next call to
 				 * epoll_wait() will check again the events
-				 * availability. At this point, noone can insert
+				 * availability. At this point, no one can insert
 				 * into ep->rdllist besides us. The epoll_ctl()
 				 * callers are locked out by
 				 * ep_scan_ready_list() holding "mtx" and the
diff --git a/fs/exec.c b/fs/exec.c
index 5e62d26a4fe..8328beb9016 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1659,6 +1659,7 @@ static int zap_process(struct task_struct *start, int exit_code)
 
 	t = start;
 	do {
+		task_clear_group_stop_pending(t);
 		if (t != current && t->mm) {
 			sigaddset(&t->pending.signal, SIGKILL);
 			signal_wake_up(t, 1);
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index 5e74ad3d400..3bbd46956d7 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -115,7 +115,7 @@ struct exofs_sb_stats {
  * Describes the raid used in the FS. It is part of the device table.
  * This here is taken from the pNFS-objects definition. In exofs we
  * use one raid policy through-out the filesystem. (NOTE: the funny
- * alignment at begining. We take care of it at exofs_device_table.
+ * alignment at beginning. We take care of it at exofs_device_table.
  */
 struct exofs_dt_data_map {
 	__le32	cb_num_comps;
@@ -136,7 +136,7 @@ struct exofs_dt_device_info {
 	u8	systemid[OSD_SYSTEMID_LEN];
 	__le64	long_name_offset;	/* If !0 then offset-in-file */
 	__le32	osdname_len;		/* */
-	u8	osdname[44];		/* Embbeded, Ususally an asci uuid */
+	u8	osdname[44];		/* Embbeded, Usually an asci uuid */
 } __packed;
 
 /*
diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c
index 0d06f4e7569..8f44cef1b3e 100644
--- a/fs/ext2/balloc.c
+++ b/fs/ext2/balloc.c
@@ -850,7 +850,7 @@ static int find_next_reservable_window(
 		rsv_window_remove(sb, my_rsv);
 
 	/*
-	 * Let's book the whole avaliable window for now.  We will check the
+	 * Let's book the whole available window for now.  We will check the
 	 * disk bitmap later and then, if there are free blocks then we adjust
 	 * the window size if it's larger than requested.
 	 * Otherwise, we will remove this node from the tree next time
@@ -1357,9 +1357,9 @@ retry_alloc:
 			goto allocated;
 	}
 	/*
-	 * We may end up a bogus ealier ENOSPC error due to
+	 * We may end up a bogus earlier ENOSPC error due to
 	 * filesystem is "full" of reservations, but
-	 * there maybe indeed free blocks avaliable on disk
+	 * there maybe indeed free blocks available on disk
 	 * In this case, we just forget about the reservations
 	 * just do block allocation as without reservations.
 	 */
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index c47f706878b..788e09a07f7 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -305,7 +305,7 @@ static ext2_fsblk_t ext2_find_near(struct inode *inode, Indirect *ind)
 		return ind->bh->b_blocknr;
 
 	/*
-	 * It is going to be refered from inode itself? OK, just put it into
+	 * It is going to be referred from inode itself? OK, just put it into
 	 * the same cylinder group then.
 	 */
 	bg_start = ext2_group_first_block_no(inode->i_sb, ei->i_block_group);
@@ -913,7 +913,7 @@ static inline int all_zeroes(__le32 *p, __le32 *q)
  *
  *	When we do truncate() we may have to clean the ends of several indirect
  *	blocks but leave the blocks themselves alive. Block is partially
- *	truncated if some data below the new i_size is refered from it (and
+ *	truncated if some data below the new i_size is referred from it (and
  *	it is on the path to the first completely truncated data block, indeed).
  *	We have to free the top of that path along with everything to the right
  *	of the path. Since no allocation past the truncation point is possible
@@ -990,7 +990,7 @@ no_top:
  *	@p:	array of block numbers
  *	@q:	points immediately past the end of array
  *
- *	We are freeing all blocks refered from that array (numbers are
+ *	We are freeing all blocks referred from that array (numbers are
  *	stored as little-endian 32-bit) and updating @inode->i_blocks
  *	appropriately.
  */
@@ -1030,7 +1030,7 @@ static inline void ext2_free_data(struct inode *inode, __le32 *p, __le32 *q)
  *	@q:	pointer immediately past the end of array
  *	@depth:	depth of the branches to free
  *
- *	We are freeing all blocks refered from these branches (numbers are
+ *	We are freeing all blocks referred from these branches (numbers are
  *	stored as little-endian 32-bit) and updating @inode->i_blocks
  *	appropriately.
  */
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 7731695e65d..0a78dae7e2c 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -1382,7 +1382,7 @@ static struct dentry *ext2_mount(struct file_system_type *fs_type,
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
  * acquiring the locks... As quota files are never truncated and quota code
- * itself serializes the operations (and noone else should touch the files)
+ * itself serializes the operations (and no one else should touch the files)
  * we don't have to be afraid of races */
 static ssize_t ext2_quota_read(struct super_block *sb, int type, char *data,
 			       size_t len, loff_t off)
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index c2e4dce984d..529970617a2 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -35,7 +35,7 @@
  *   +------------------+
  *
  * The block header is followed by multiple entry descriptors. These entry
- * descriptors are variable in size, and alligned to EXT2_XATTR_PAD
+ * descriptors are variable in size, and aligned to EXT2_XATTR_PAD
  * byte boundaries. The entry descriptors are sorted by attribute name,
  * so that two extended attribute blocks can be compared efficiently.
  *
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 153242187fc..fe52297e31a 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -590,7 +590,7 @@ do_more:
 				BUFFER_TRACE(debug_bh, "Deleted!");
 				if (!bh2jh(bitmap_bh)->b_committed_data)
 					BUFFER_TRACE(debug_bh,
-						"No commited data in bitmap");
+						"No committed data in bitmap");
 				BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap");
 				__brelse(debug_bh);
 			}
@@ -1063,7 +1063,7 @@ static int find_next_reservable_window(
 		rsv_window_remove(sb, my_rsv);
 
 	/*
-	 * Let's book the whole avaliable window for now.  We will check the
+	 * Let's book the whole available window for now.  We will check the
 	 * disk bitmap later and then, if there are free blocks then we adjust
 	 * the window size if it's larger than requested.
 	 * Otherwise, we will remove this node from the tree next time
@@ -1456,7 +1456,7 @@ static int ext3_has_free_blocks(struct ext3_sb_info *sbi)
  *
  * ext3_should_retry_alloc() is called when ENOSPC is returned, and if
  * it is profitable to retry the operation, this function will wait
- * for the current or commiting transaction to complete, and then
+ * for the current or committing transaction to complete, and then
  * return TRUE.
  *
  * if the total number of retries exceed three times, return FALSE.
@@ -1632,9 +1632,9 @@ retry_alloc:
 			goto allocated;
 	}
 	/*
-	 * We may end up a bogus ealier ENOSPC error due to
+	 * We may end up a bogus earlier ENOSPC error due to
 	 * filesystem is "full" of reservations, but
-	 * there maybe indeed free blocks avaliable on disk
+	 * there maybe indeed free blocks available on disk
 	 * In this case, we just forget about the reservations
 	 * just do block allocation as without reservations.
 	 */
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index fe2541d250e..68b2e43d7c3 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2055,7 +2055,7 @@ static inline int all_zeroes(__le32 *p, __le32 *q)
  *
  *	When we do truncate() we may have to clean the ends of several
  *	indirect blocks but leave the blocks themselves alive. Block is
- *	partially truncated if some data below the new i_size is refered
+ *	partially truncated if some data below the new i_size is referred
  *	from it (and it is on the path to the first completely truncated
  *	data block, indeed).  We have to free the top of that path along
  *	with everything to the right of the path. Since no allocation
@@ -2184,7 +2184,7 @@ static void ext3_clear_blocks(handle_t *handle, struct inode *inode,
  * @first:	array of block numbers
  * @last:	points immediately past the end of array
  *
- * We are freeing all blocks refered from that array (numbers are stored as
+ * We are freeing all blocks referred from that array (numbers are stored as
  * little-endian 32-bit) and updating @inode->i_blocks appropriately.
  *
  * We accumulate contiguous runs of blocks to free.  Conveniently, if these
@@ -2272,7 +2272,7 @@ static void ext3_free_data(handle_t *handle, struct inode *inode,
  *	@last:	pointer immediately past the end of array
  *	@depth:	depth of the branches to free
  *
- *	We are freeing all blocks refered from these branches (numbers are
+ *	We are freeing all blocks referred from these branches (numbers are
  *	stored as little-endian 32-bit) and updating @inode->i_blocks
  *	appropriately.
  */
@@ -3291,7 +3291,7 @@ static int ext3_writepage_trans_blocks(struct inode *inode)
 	if (ext3_should_journal_data(inode))
 		ret = 3 * (bpp + indirects) + 2;
 	else
-		ret = 2 * (bpp + indirects) + 2;
+		ret = 2 * (bpp + indirects) + indirects + 2;
 
 #ifdef CONFIG_QUOTA
 	/* We know that structure was already allocated during dquot_initialize so
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 108b142e11e..7916e4ce166 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -1009,7 +1009,7 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es,
 
 	if (test_opt(sb, DEBUG))
 		printk(KERN_DEBUG "EXT3-fs: extending last group from "E3FSBLK
-		       " upto "E3FSBLK" blocks\n",
+		       " up to "E3FSBLK" blocks\n",
 		       o_blocks_count, n_blocks_count);
 
 	if (n_blocks_count == 0 || n_blocks_count == o_blocks_count)
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 071689f86e1..3c6a9e0eadc 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2925,7 +2925,7 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id,
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
  * acquiring the locks... As quota files are never truncated and quota code
- * itself serializes the operations (and noone else should touch the files)
+ * itself serializes the operations (and no one else should touch the files)
  * we don't have to be afraid of races */
 static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data,
 			       size_t len, loff_t off)
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 97b970e7dd1..1c67139ad4b 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -547,7 +547,7 @@ int ext4_claim_free_blocks(struct ext4_sb_info *sbi,
  *
  * ext4_should_retry_alloc() is called when ENOSPC is returned, and if
  * it is profitable to retry the operation, this function will wait
- * for the current or commiting transaction to complete, and then
+ * for the current or committing transaction to complete, and then
  * return TRUE.
  *
  * if the total number of retries exceed three times, return FALSE.
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index e25e99bf7ee..d0f53538a57 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -86,8 +86,8 @@
 
 #ifdef CONFIG_QUOTA
 /* Amount of blocks needed for quota update - we know that the structure was
- * allocated so we need to update only inode+data */
-#define EXT4_QUOTA_TRANS_BLOCKS(sb) (test_opt(sb, QUOTA) ? 2 : 0)
+ * allocated so we need to update only data block */
+#define EXT4_QUOTA_TRANS_BLOCKS(sb) (test_opt(sb, QUOTA) ? 1 : 0)
 /* Amount of blocks needed for quota insert/delete - we do some block writes
  * but inode, sb and group updates are done only once */
 #define EXT4_QUOTA_INIT_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_INIT_ALLOC*\
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index dd2cb5076ff..4890d6f3ad1 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1729,7 +1729,7 @@ repeat:
 		BUG_ON(npath->p_depth != path->p_depth);
 		eh = npath[depth].p_hdr;
 		if (le16_to_cpu(eh->eh_entries) < le16_to_cpu(eh->eh_max)) {
-			ext_debug("next leaf isnt full(%d)\n",
+			ext_debug("next leaf isn't full(%d)\n",
 				  le16_to_cpu(eh->eh_entries));
 			path = npath;
 			goto repeat;
@@ -2533,7 +2533,7 @@ static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex)
 /*
  * This function is called by ext4_ext_map_blocks() if someone tries to write
  * to an uninitialized extent. It may result in splitting the uninitialized
- * extent into multiple extents (upto three - one initialized and two
+ * extent into multiple extents (up to three - one initialized and two
  * uninitialized).
  * There are three possibilities:
  *   a> There is no split required: Entire extent should be initialized
@@ -3174,7 +3174,7 @@ ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
 						   path, flags);
 		/*
 		 * Flag the inode(non aio case) or end_io struct (aio case)
-		 * that this IO needs to convertion to written when IO is
+		 * that this IO needs to conversion to written when IO is
 		 * completed
 		 */
 		if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
@@ -3460,10 +3460,10 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 		ext4_ext_mark_uninitialized(&newex);
 		/*
 		 * io_end structure was created for every IO write to an
-		 * uninitialized extent. To avoid unecessary conversion,
+		 * uninitialized extent. To avoid unnecessary conversion,
 		 * here we flag the IO that really needs the conversion.
 		 * For non asycn direct IO case, flag the inode state
-		 * that we need to perform convertion when IO is done.
+		 * that we need to perform conversion when IO is done.
 		 */
 		if ((flags & EXT4_GET_BLOCKS_PRE_IO)) {
 			if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 7f74019d6d7..e9473cbe80d 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -101,7 +101,7 @@ extern int ext4_flush_completed_IO(struct inode *inode)
 		 * to the work-to-be schedule is freed.
 		 *
 		 * Thus we need to keep the io structure still valid here after
-		 * convertion finished. The io structure has a flag to
+		 * conversion finished. The io structure has a flag to
 		 * avoid double converting from both fsync and background work
 		 * queue work.
 		 */
@@ -125,9 +125,11 @@ extern int ext4_flush_completed_IO(struct inode *inode)
  * the parent directory's parent as well, and so on recursively, if
  * they are also freshly created.
  */
-static void ext4_sync_parent(struct inode *inode)
+static int ext4_sync_parent(struct inode *inode)
 {
+	struct writeback_control wbc;
 	struct dentry *dentry = NULL;
+	int ret = 0;
 
 	while (inode && ext4_test_inode_state(inode, EXT4_STATE_NEWENTRY)) {
 		ext4_clear_inode_state(inode, EXT4_STATE_NEWENTRY);
@@ -136,8 +138,17 @@ static void ext4_sync_parent(struct inode *inode)
 		if (!dentry || !dentry->d_parent || !dentry->d_parent->d_inode)
 			break;
 		inode = dentry->d_parent->d_inode;
-		sync_mapping_buffers(inode->i_mapping);
+		ret = sync_mapping_buffers(inode->i_mapping);
+		if (ret)
+			break;
+		memset(&wbc, 0, sizeof(wbc));
+		wbc.sync_mode = WB_SYNC_ALL;
+		wbc.nr_to_write = 0;         /* only write out the inode */
+		ret = sync_inode(inode, &wbc);
+		if (ret)
+			break;
 	}
+	return ret;
 }
 
 /*
@@ -176,7 +187,7 @@ int ext4_sync_file(struct file *file, int datasync)
 	if (!journal) {
 		ret = generic_file_fsync(file, datasync);
 		if (!ret && !list_empty(&inode->i_dentry))
-			ext4_sync_parent(inode);
+			ret = ext4_sync_parent(inode);
 		goto out;
 	}
 
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 1a86282b902..f2fa5e8a582 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2502,6 +2502,7 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 		 * for partial write.
 		 */
 		set_buffer_new(bh);
+		set_buffer_mapped(bh);
 	}
 	return 0;
 }
@@ -2588,7 +2589,7 @@ static void ext4_end_io_buffer_write(struct buffer_head *bh, int uptodate);
  * because we should have holes filled from ext4_page_mkwrite(). We even don't
  * need to file the inode to the transaction's list in ordered mode because if
  * we are writing back data added by write(), the inode is already there and if
- * we are writing back data modified via mmap(), noone guarantees in which
+ * we are writing back data modified via mmap(), no one guarantees in which
  * transaction the data will hit the disk. In case we are journaling data, we
  * cannot start transaction directly because transaction start ranks above page
  * lock so we have to do some magic.
@@ -2690,7 +2691,7 @@ static int ext4_writepage(struct page *page,
 
 /*
  * This is called via ext4_da_writepages() to
- * calulate the total number of credits to reserve to fit
+ * calculate the total number of credits to reserve to fit
  * a single extent allocation into a single transaction,
  * ext4_da_writpeages() will loop calling this before
  * the block allocation.
@@ -3304,7 +3305,7 @@ int ext4_alloc_da_blocks(struct inode *inode)
 	 * the pages by calling redirty_page_for_writepage() but that
 	 * would be ugly in the extreme.  So instead we would need to
 	 * replicate parts of the code in the above functions,
-	 * simplifying them becuase we wouldn't actually intend to
+	 * simplifying them because we wouldn't actually intend to
 	 * write out the pages, but rather only collect contiguous
 	 * logical block extents, call the multi-block allocator, and
 	 * then update the buffer heads with the block allocations.
@@ -3694,7 +3695,7 @@ retry:
  *
  * The unwrritten extents will be converted to written when DIO is completed.
  * For async direct IO, since the IO may still pending when return, we
- * set up an end_io call back function, which will do the convertion
+ * set up an end_io call back function, which will do the conversion
  * when async direct IO completed.
  *
  * If the O_DIRECT write will extend the file then add this inode to the
@@ -3717,7 +3718,7 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb,
  		 * We could direct write to holes and fallocate.
 		 *
  		 * Allocated blocks to fill the hole are marked as uninitialized
- 		 * to prevent paralel buffered read to expose the stale data
+ 		 * to prevent parallel buffered read to expose the stale data
  		 * before DIO complete the data IO.
 		 *
  		 * As to previously fallocated extents, ext4 get_block
@@ -3778,7 +3779,7 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb,
 			int err;
 			/*
 			 * for non AIO case, since the IO is already
-			 * completed, we could do the convertion right here
+			 * completed, we could do the conversion right here
 			 */
 			err = ext4_convert_unwritten_extents(inode,
 							     offset, ret);
@@ -4025,7 +4026,7 @@ static inline int all_zeroes(__le32 *p, __le32 *q)
  *
  *	When we do truncate() we may have to clean the ends of several
  *	indirect blocks but leave the blocks themselves alive. Block is
- *	partially truncated if some data below the new i_size is refered
+ *	partially truncated if some data below the new i_size is referred
  *	from it (and it is on the path to the first completely truncated
  *	data block, indeed).  We have to free the top of that path along
  *	with everything to the right of the path. Since no allocation
@@ -4169,7 +4170,7 @@ out_err:
  * @first:	array of block numbers
  * @last:	points immediately past the end of array
  *
- * We are freeing all blocks refered from that array (numbers are stored as
+ * We are freeing all blocks referred from that array (numbers are stored as
  * little-endian 32-bit) and updating @inode->i_blocks appropriately.
  *
  * We accumulate contiguous runs of blocks to free.  Conveniently, if these
@@ -4261,7 +4262,7 @@ static void ext4_free_data(handle_t *handle, struct inode *inode,
  *	@last:	pointer immediately past the end of array
  *	@depth:	depth of the branches to free
  *
- *	We are freeing all blocks refered from these branches (numbers are
+ *	We are freeing all blocks referred from these branches (numbers are
  *	stored as little-endian 32-bit) and updating @inode->i_blocks
  *	appropriately.
  */
@@ -4429,8 +4430,8 @@ void ext4_truncate(struct inode *inode)
 	Indirect chain[4];
 	Indirect *partial;
 	__le32 nr = 0;
-	int n;
-	ext4_lblk_t last_block;
+	int n = 0;
+	ext4_lblk_t last_block, max_block;
 	unsigned blocksize = inode->i_sb->s_blocksize;
 
 	trace_ext4_truncate_enter(inode);
@@ -4455,14 +4456,18 @@ void ext4_truncate(struct inode *inode)
 
 	last_block = (inode->i_size + blocksize-1)
 					>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
+	max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1)
+					>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
 
 	if (inode->i_size & (blocksize - 1))
 		if (ext4_block_truncate_page(handle, mapping, inode->i_size))
 			goto out_stop;
 
-	n = ext4_block_to_path(inode, last_block, offsets, NULL);
-	if (n == 0)
-		goto out_stop;	/* error */
+	if (last_block != max_block) {
+		n = ext4_block_to_path(inode, last_block, offsets, NULL);
+		if (n == 0)
+			goto out_stop;	/* error */
+	}
 
 	/*
 	 * OK.  This truncate is going to happen.  We add the inode to the
@@ -4493,7 +4498,13 @@ void ext4_truncate(struct inode *inode)
 	 */
 	ei->i_disksize = inode->i_size;
 
-	if (n == 1) {		/* direct blocks */
+	if (last_block == max_block) {
+		/*
+		 * It is unnecessary to free any data blocks if last_block is
+		 * equal to the indirect block limit.
+		 */
+		goto out_unlock;
+	} else if (n == 1) {		/* direct blocks */
 		ext4_free_data(handle, inode, NULL, i_data+offsets[0],
 			       i_data + EXT4_NDIR_BLOCKS);
 		goto do_indirects;
@@ -4553,6 +4564,7 @@ do_indirects:
 		;
 	}
 
+out_unlock:
 	up_write(&ei->i_data_sem);
 	inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
 	ext4_mark_inode_dirty(handle, inode);
@@ -5398,13 +5410,12 @@ static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks,
 	/* if nrblocks are contiguous */
 	if (chunk) {
 		/*
-		 * With N contiguous data blocks, it need at most
-		 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks
-		 * 2 dindirect blocks
-		 * 1 tindirect block
+		 * With N contiguous data blocks, we need at most
+		 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks,
+		 * 2 dindirect blocks, and 1 tindirect block
 		 */
-		indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb);
-		return indirects + 3;
+		return DIV_ROUND_UP(nrblocks,
+				    EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4;
 	}
 	/*
 	 * if nrblocks are not contiguous, worse case, each block touch
@@ -5478,7 +5489,7 @@ static int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
 }
 
 /*
- * Calulate the total number of credits to reserve to fit
+ * Calculate the total number of credits to reserve to fit
  * the modification of a single pages into a single transaction,
  * which may include multiple chunks of block allocations.
  *
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index a5837a837a8..d8a16eecf1d 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -92,7 +92,7 @@
  * between CPUs. It is possible to get scheduled at this point.
  *
  * The locality group prealloc space is used looking at whether we have
- * enough free space (pa_free) withing the prealloc space.
+ * enough free space (pa_free) within the prealloc space.
  *
  * If we can't allocate blocks via inode prealloc or/and locality group
  * prealloc then we look at the buddy cache. The buddy cache is represented
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index d1bafa57f48..92816b4e0f1 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -517,7 +517,7 @@ int ext4_ext_migrate(struct inode *inode)
 	 * start with one credit accounted for
 	 * superblock modification.
 	 *
-	 * For the tmp_inode we already have commited the
+	 * For the tmp_inode we already have committed the
 	 * trascation that created the inode. Later as and
 	 * when we add extents we extent the journal
 	 */
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 22546ad7f0a..8553dfb310a 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -242,27 +242,44 @@ static void ext4_put_nojournal(handle_t *handle)
  * journal_end calls result in the superblock being marked dirty, so
  * that sync() will call the filesystem's write_super callback if
  * appropriate.
+ *
+ * To avoid j_barrier hold in userspace when a user calls freeze(),
+ * ext4 prevents a new handle from being started by s_frozen, which
+ * is in an upper layer.
  */
 handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks)
 {
 	journal_t *journal;
+	handle_t  *handle;
 
 	if (sb->s_flags & MS_RDONLY)
 		return ERR_PTR(-EROFS);
 
-	vfs_check_frozen(sb, SB_FREEZE_TRANS);
-	/* Special case here: if the journal has aborted behind our
-	 * backs (eg. EIO in the commit thread), then we still need to
-	 * take the FS itself readonly cleanly. */
 	journal = EXT4_SB(sb)->s_journal;
-	if (journal) {
-		if (is_journal_aborted(journal)) {
-			ext4_abort(sb, "Detected aborted journal");
-			return ERR_PTR(-EROFS);
-		}
-		return jbd2_journal_start(journal, nblocks);
+	handle = ext4_journal_current_handle();
+
+	/*
+	 * If a handle has been started, it should be allowed to
+	 * finish, otherwise deadlock could happen between freeze
+	 * and others(e.g. truncate) due to the restart of the
+	 * journal handle if the filesystem is forzen and active
+	 * handles are not stopped.
+	 */
+	if (!handle)
+		vfs_check_frozen(sb, SB_FREEZE_TRANS);
+
+	if (!journal)
+		return ext4_get_nojournal();
+	/*
+	 * Special case here: if the journal has aborted behind our
+	 * backs (eg. EIO in the commit thread), then we still need to
+	 * take the FS itself readonly cleanly.
+	 */
+	if (is_journal_aborted(journal)) {
+		ext4_abort(sb, "Detected aborted journal");
+		return ERR_PTR(-EROFS);
 	}
-	return ext4_get_nojournal();
+	return jbd2_journal_start(journal, nblocks);
 }
 
 /*
@@ -617,7 +634,7 @@ __acquires(bitlock)
 	 * filesystem will have already been marked read/only and the
 	 * journal has been aborted.  We return 1 as a hint to callers
 	 * who might what to use the return value from
-	 * ext4_grp_locked_error() to distinguish beween the
+	 * ext4_grp_locked_error() to distinguish between the
 	 * ERRORS_CONT and ERRORS_RO case, and perhaps return more
 	 * aggressively from the ext4 function in question, with a
 	 * more appropriate error code.
@@ -2975,6 +2992,12 @@ static int ext4_register_li_request(struct super_block *sb,
 	mutex_unlock(&ext4_li_info->li_list_mtx);
 
 	sbi->s_li_request = elr;
+	/*
+	 * set elr to NULL here since it has been inserted to
+	 * the request_list and the removal and free of it is
+	 * handled by ext4_clear_request_list from now on.
+	 */
+	elr = NULL;
 
 	if (!(ext4_li_info->li_state & EXT4_LAZYINIT_RUNNING)) {
 		ret = ext4_run_lazyinit_thread();
@@ -3385,6 +3408,10 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	get_random_bytes(&sbi->s_next_generation, sizeof(u32));
 	spin_lock_init(&sbi->s_next_gen_lock);
 
+	init_timer(&sbi->s_err_report);
+	sbi->s_err_report.function = print_daily_error_info;
+	sbi->s_err_report.data = (unsigned long) sb;
+
 	err = percpu_counter_init(&sbi->s_freeblocks_counter,
 			ext4_count_free_blocks(sb));
 	if (!err) {
@@ -3646,9 +3673,6 @@ no_journal:
 		 "Opts: %s%s%s", descr, sbi->s_es->s_mount_opts,
 		 *sbi->s_es->s_mount_opts ? "; " : "", orig_data);
 
-	init_timer(&sbi->s_err_report);
-	sbi->s_err_report.function = print_daily_error_info;
-	sbi->s_err_report.data = (unsigned long) sb;
 	if (es->s_error_count)
 		mod_timer(&sbi->s_err_report, jiffies + 300*HZ); /* 5 minutes */
 
@@ -3672,6 +3696,7 @@ failed_mount_wq:
 		sbi->s_journal = NULL;
 	}
 failed_mount3:
+	del_timer(&sbi->s_err_report);
 	if (sbi->s_flex_groups) {
 		if (is_vmalloc_addr(sbi->s_flex_groups))
 			vfree(sbi->s_flex_groups);
@@ -4138,6 +4163,11 @@ static int ext4_sync_fs(struct super_block *sb, int wait)
 /*
  * LVM calls this function before a (read-only) snapshot is created.  This
  * gives us a chance to flush the journal completely and mark the fs clean.
+ *
+ * Note that only this function cannot bring a filesystem to be in a clean
+ * state independently, because ext4 prevents a new handle from being started
+ * by @sb->s_frozen, which stays in an upper layer.  It thus needs help from
+ * the upper layer.
  */
 static int ext4_freeze(struct super_block *sb)
 {
@@ -4614,17 +4644,30 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 
 static int ext4_quota_off(struct super_block *sb, int type)
 {
+	struct inode *inode = sb_dqopt(sb)->files[type];
+	handle_t *handle;
+
 	/* Force all delayed allocation blocks to be allocated.
 	 * Caller already holds s_umount sem */
 	if (test_opt(sb, DELALLOC))
 		sync_filesystem(sb);
 
+	/* Update modification times of quota files when userspace can
+	 * start looking at them */
+	handle = ext4_journal_start(inode, 1);
+	if (IS_ERR(handle))
+		goto out;
+	inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	ext4_mark_inode_dirty(handle, inode);
+	ext4_journal_stop(handle);
+
+out:
 	return dquot_quota_off(sb, type);
 }
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
  * acquiring the locks... As quota files are never truncated and quota code
- * itself serializes the operations (and noone else should touch the files)
+ * itself serializes the operations (and no one else should touch the files)
  * we don't have to be afraid of races */
 static ssize_t ext4_quota_read(struct super_block *sb, int type, char *data,
 			       size_t len, loff_t off)
@@ -4714,9 +4757,8 @@ out:
 	if (inode->i_size < off + len) {
 		i_size_write(inode, off + len);
 		EXT4_I(inode)->i_disksize = inode->i_size;
+		ext4_mark_inode_dirty(handle, inode);
 	}
-	inode->i_mtime = inode->i_ctime = CURRENT_TIME;
-	ext4_mark_inode_dirty(handle, inode);
 	mutex_unlock(&inode->i_mutex);
 	return len;
 }
diff --git a/fs/fhandle.c b/fs/fhandle.c
index bf93ad2bee0..6b088641f5b 100644
--- a/fs/fhandle.c
+++ b/fs/fhandle.c
@@ -7,6 +7,7 @@
 #include <linux/exportfs.h>
 #include <linux/fs_struct.h>
 #include <linux/fsnotify.h>
+#include <linux/personality.h>
 #include <asm/uaccess.h>
 #include "internal.h"
 
diff --git a/fs/file.c b/fs/file.c
index 0be344755c0..4c6992d8f3b 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
+#include <linux/mmzone.h>
 #include <linux/time.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -39,14 +40,17 @@ int sysctl_nr_open_max = 1024 * 1024; /* raised later */
  */
 static DEFINE_PER_CPU(struct fdtable_defer, fdtable_defer_list);
 
-static inline void *alloc_fdmem(unsigned int size)
+static void *alloc_fdmem(unsigned int size)
 {
-	void *data;
-
-	data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN);
-	if (data != NULL)
-		return data;
-
+	/*
+	 * Very large allocations can stress page reclaim, so fall back to
+	 * vmalloc() if the allocation size will be considered "large" by the VM.
+	 */
+	if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
+		void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN);
+		if (data != NULL)
+			return data;
+	}
 	return vmalloc(size);
 }
 
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 751d6b255a1..0845f84f2a5 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -110,14 +110,13 @@ int unregister_filesystem(struct file_system_type * fs)
 			*tmp = fs->next;
 			fs->next = NULL;
 			write_unlock(&file_systems_lock);
+			synchronize_rcu();
 			return 0;
 		}
 		tmp = &(*tmp)->next;
 	}
 	write_unlock(&file_systems_lock);
 
-	synchronize_rcu();
-
 	return -EINVAL;
 }
 
diff --git a/fs/freevxfs/vxfs_fshead.c b/fs/freevxfs/vxfs_fshead.c
index 78948b4b189..c9a6a94e58e 100644
--- a/fs/freevxfs/vxfs_fshead.c
+++ b/fs/freevxfs/vxfs_fshead.c
@@ -164,7 +164,7 @@ vxfs_read_fshead(struct super_block *sbp)
 		goto out_free_pfp;
 	}
 	if (!VXFS_ISILT(VXFS_INO(infp->vsi_stilist))) {
-		printk(KERN_ERR "vxfs: structual list inode is of wrong type (%x)\n",
+		printk(KERN_ERR "vxfs: structural list inode is of wrong type (%x)\n",
 				VXFS_INO(infp->vsi_stilist)->vii_mode & VXFS_TYPE_MASK); 
 		goto out_iput_stilist;
 	}
diff --git a/fs/freevxfs/vxfs_lookup.c b/fs/freevxfs/vxfs_lookup.c
index 6c5131d592f..3360f1e678a 100644
--- a/fs/freevxfs/vxfs_lookup.c
+++ b/fs/freevxfs/vxfs_lookup.c
@@ -162,7 +162,7 @@ vxfs_find_entry(struct inode *ip, struct dentry *dp, struct page **ppp)
 /**
  * vxfs_inode_by_name - find inode number for dentry
  * @dip:	directory to search in
- * @dp:		dentry we seach for
+ * @dp:		dentry we search for
  *
  * Description:
  *   vxfs_inode_by_name finds out the inode number of
diff --git a/fs/freevxfs/vxfs_olt.h b/fs/freevxfs/vxfs_olt.h
index d8324296486..b7b3af50261 100644
--- a/fs/freevxfs/vxfs_olt.h
+++ b/fs/freevxfs/vxfs_olt.h
@@ -60,7 +60,7 @@ enum {
  *
  * The Object Location Table header is placed at the beginning of each
  * OLT extent.  It is used to fing certain filesystem-wide metadata, e.g.
- * the inital inode list, the fileset header or the device configuration.
+ * the initial inode list, the fileset header or the device configuration.
  */
 struct vxfs_olt {
 	u_int32_t	olt_magic;	/* magic number			*/
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index b5ed541fb13..34591ee804b 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -144,7 +144,7 @@ __bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
  *
  * Description:
  *   This does WB_SYNC_NONE opportunistic writeback. The IO is only
- *   started when this function returns, we make no guarentees on
+ *   started when this function returns, we make no guarantees on
  *   completion. Caller need not hold sb s_umount semaphore.
  *
  */
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index c6ba49bd95b..b32eb29a4e6 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -174,7 +174,7 @@ static int fuse_dentry_revalidate(struct dentry *entry, struct nameidata *nd)
 		if (!inode)
 			return 0;
 
-		if (nd->flags & LOOKUP_RCU)
+		if (nd && (nd->flags & LOOKUP_RCU))
 			return -ECHILD;
 
 		fc = get_fuse_conn(inode);
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 6ea00734984..82a66466a24 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -523,7 +523,7 @@ static int fuse_readpage(struct file *file, struct page *page)
 		goto out;
 
 	/*
-	 * Page writeback can extend beyond the liftime of the
+	 * Page writeback can extend beyond the lifetime of the
 	 * page-cache page, so make sure we read a properly synced
 	 * page.
 	 */
diff --git a/fs/gfs2/Makefile b/fs/gfs2/Makefile
index f3d23ef4e87..86128202384 100644
--- a/fs/gfs2/Makefile
+++ b/fs/gfs2/Makefile
@@ -1,9 +1,9 @@
 ccflags-y := -I$(src)
 obj-$(CONFIG_GFS2_FS) += gfs2.o
 gfs2-y := acl.o bmap.o dir.o xattr.o glock.o \
-	glops.o inode.o log.o lops.o main.o meta_io.o \
+	glops.o log.o lops.o main.o meta_io.o \
 	aops.o dentry.o export.o file.o \
-	ops_fstype.o ops_inode.o quota.o \
+	ops_fstype.o inode.o quota.o \
 	recovery.o rgrp.o super.o sys.o trans.o util.o
 
 gfs2-$(CONFIG_GFS2_FS_LOCKING_DLM) += lock_dlm.o
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index c71995b111b..802ac5eeba2 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -884,8 +884,8 @@ static int gfs2_write_end(struct file *file, struct address_space *mapping,
 	}
 
 	brelse(dibh);
-	gfs2_trans_end(sdp);
 failed:
+	gfs2_trans_end(sdp);
 	if (al) {
 		gfs2_inplace_release(ip);
 		gfs2_quota_unlock(ip);
@@ -1076,8 +1076,8 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask)
 		bd = bh->b_private;
 		if (bd && bd->bd_ail)
 			goto cannot_release;
-		gfs2_assert_warn(sdp, !buffer_pinned(bh));
-		gfs2_assert_warn(sdp, !buffer_dirty(bh));
+		if (buffer_pinned(bh) || buffer_dirty(bh))
+			goto not_possible;
 		bh = bh->b_this_page;
 	} while(bh != head);
 	gfs2_log_unlock(sdp);
@@ -1107,6 +1107,10 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask)
 	} while (bh != head);
 
 	return try_to_free_buffers(page);
+
+not_possible: /* Should never happen */
+	WARN_ON(buffer_dirty(bh));
+	WARN_ON(buffer_pinned(bh));
 cannot_release:
 	gfs2_log_unlock(sdp);
 	return 0;
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index ef3dc4b9fae..74add2ddcc3 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1136,7 +1136,7 @@ void gfs2_trim_blocks(struct inode *inode)
  * earlier versions of GFS2 have a bug in the stuffed file reading
  * code which will result in a buffer overrun if the size is larger
  * than the max stuffed file size. In order to prevent this from
- * occuring, such files are unstuffed, but in other cases we can
+ * occurring, such files are unstuffed, but in other cases we can
  * just update the inode size directly.
  *
  * Returns: 0 on success, or -ve on error
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index 5c356d09c32..091ee477953 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -82,12 +82,9 @@
 struct qstr gfs2_qdot __read_mostly;
 struct qstr gfs2_qdotdot __read_mostly;
 
-typedef int (*leaf_call_t) (struct gfs2_inode *dip, u32 index, u32 len,
-			    u64 leaf_no, void *data);
 typedef int (*gfs2_dscan_t)(const struct gfs2_dirent *dent,
 			    const struct qstr *name, void *opaque);
 
-
 int gfs2_dir_get_new_buffer(struct gfs2_inode *ip, u64 block,
 			    struct buffer_head **bhp)
 {
@@ -1506,7 +1503,7 @@ struct inode *gfs2_dir_search(struct inode *dir, const struct qstr *name)
 		inode = gfs2_inode_lookup(dir->i_sb, 
 				be16_to_cpu(dent->de_type),
 				be64_to_cpu(dent->de_inum.no_addr),
-				be64_to_cpu(dent->de_inum.no_formal_ino));
+				be64_to_cpu(dent->de_inum.no_formal_ino), 0);
 		brelse(bh);
 		return inode;
 	}
@@ -1600,7 +1597,7 @@ static int dir_new_leaf(struct inode *inode, const struct qstr *name)
  */
 
 int gfs2_dir_add(struct inode *inode, const struct qstr *name,
-		 const struct gfs2_inode *nip, unsigned type)
+		 const struct gfs2_inode *nip)
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct buffer_head *bh;
@@ -1616,7 +1613,7 @@ int gfs2_dir_add(struct inode *inode, const struct qstr *name,
 				return PTR_ERR(dent);
 			dent = gfs2_init_dirent(inode, dent, name, bh);
 			gfs2_inum_out(nip, dent);
-			dent->de_type = cpu_to_be16(type);
+			dent->de_type = cpu_to_be16(IF2DT(nip->i_inode.i_mode));
 			if (ip->i_diskflags & GFS2_DIF_EXHASH) {
 				leaf = (struct gfs2_leaf *)bh->b_data;
 				be16_add_cpu(&leaf->lf_entries, 1);
@@ -1628,6 +1625,8 @@ int gfs2_dir_add(struct inode *inode, const struct qstr *name,
 			gfs2_trans_add_bh(ip->i_gl, bh, 1);
 			ip->i_entries++;
 			ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME;
+			if (S_ISDIR(nip->i_inode.i_mode))
+				inc_nlink(&ip->i_inode);
 			gfs2_dinode_out(ip, bh->b_data);
 			brelse(bh);
 			error = 0;
@@ -1672,8 +1671,9 @@ int gfs2_dir_add(struct inode *inode, const struct qstr *name,
  * Returns: 0 on success, error code on failure
  */
 
-int gfs2_dir_del(struct gfs2_inode *dip, const struct qstr *name)
+int gfs2_dir_del(struct gfs2_inode *dip, const struct dentry *dentry)
 {
+	const struct qstr *name = &dentry->d_name;
 	struct gfs2_dirent *dent, *prev = NULL;
 	struct buffer_head *bh;
 	int error;
@@ -1714,6 +1714,8 @@ int gfs2_dir_del(struct gfs2_inode *dip, const struct qstr *name)
 	gfs2_trans_add_bh(dip->i_gl, bh, 1);
 	dip->i_entries--;
 	dip->i_inode.i_mtime = dip->i_inode.i_ctime = CURRENT_TIME;
+	if (S_ISDIR(dentry->d_inode->i_mode))
+		drop_nlink(&dip->i_inode);
 	gfs2_dinode_out(dip, bh->b_data);
 	brelse(bh);
 	mark_inode_dirty(&dip->i_inode);
@@ -1768,94 +1770,20 @@ int gfs2_dir_mvino(struct gfs2_inode *dip, const struct qstr *filename,
 }
 
 /**
- * foreach_leaf - call a function for each leaf in a directory
- * @dip: the directory
- * @lc: the function to call for each each
- * @data: private data to pass to it
- *
- * Returns: errno
- */
-
-static int foreach_leaf(struct gfs2_inode *dip, leaf_call_t lc, void *data)
-{
-	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
-	struct buffer_head *bh;
-	struct gfs2_leaf *leaf;
-	u32 hsize, len;
-	u32 ht_offset, lp_offset, ht_offset_cur = -1;
-	u32 index = 0;
-	__be64 *lp;
-	u64 leaf_no;
-	int error = 0;
-
-	hsize = 1 << dip->i_depth;
-	if (hsize * sizeof(u64) != i_size_read(&dip->i_inode)) {
-		gfs2_consist_inode(dip);
-		return -EIO;
-	}
-
-	lp = kmalloc(sdp->sd_hash_bsize, GFP_NOFS);
-	if (!lp)
-		return -ENOMEM;
-
-	while (index < hsize) {
-		lp_offset = index & (sdp->sd_hash_ptrs - 1);
-		ht_offset = index - lp_offset;
-
-		if (ht_offset_cur != ht_offset) {
-			error = gfs2_dir_read_data(dip, (char *)lp,
-						ht_offset * sizeof(__be64),
-						sdp->sd_hash_bsize, 1);
-			if (error != sdp->sd_hash_bsize) {
-				if (error >= 0)
-					error = -EIO;
-				goto out;
-			}
-			ht_offset_cur = ht_offset;
-		}
-
-		leaf_no = be64_to_cpu(lp[lp_offset]);
-		if (leaf_no) {
-			error = get_leaf(dip, leaf_no, &bh);
-			if (error)
-				goto out;
-			leaf = (struct gfs2_leaf *)bh->b_data;
-			len = 1 << (dip->i_depth - be16_to_cpu(leaf->lf_depth));
-			brelse(bh);
-
-			error = lc(dip, index, len, leaf_no, data);
-			if (error)
-				goto out;
-
-			index = (index & ~(len - 1)) + len;
-		} else
-			index++;
-	}
-
-	if (index != hsize) {
-		gfs2_consist_inode(dip);
-		error = -EIO;
-	}
-
-out:
-	kfree(lp);
-
-	return error;
-}
-
-/**
  * leaf_dealloc - Deallocate a directory leaf
  * @dip: the directory
  * @index: the hash table offset in the directory
  * @len: the number of pointers to this leaf
  * @leaf_no: the leaf number
- * @data: not used
+ * @leaf_bh: buffer_head for the starting leaf
+ * last_dealloc: 1 if this is the final dealloc for the leaf, else 0
  *
  * Returns: errno
  */
 
 static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len,
-			u64 leaf_no, void *data)
+			u64 leaf_no, struct buffer_head *leaf_bh,
+			int last_dealloc)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
 	struct gfs2_leaf *tmp_leaf;
@@ -1887,14 +1815,18 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len,
 		goto out_qs;
 
 	/*  Count the number of leaves  */
+	bh = leaf_bh;
 
 	for (blk = leaf_no; blk; blk = nblk) {
-		error = get_leaf(dip, blk, &bh);
-		if (error)
-			goto out_rlist;
+		if (blk != leaf_no) {
+			error = get_leaf(dip, blk, &bh);
+			if (error)
+				goto out_rlist;
+		}
 		tmp_leaf = (struct gfs2_leaf *)bh->b_data;
 		nblk = be64_to_cpu(tmp_leaf->lf_next);
-		brelse(bh);
+		if (blk != leaf_no)
+			brelse(bh);
 
 		gfs2_rlist_add(sdp, &rlist, blk);
 		l_blocks++;
@@ -1918,13 +1850,18 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len,
 	if (error)
 		goto out_rg_gunlock;
 
+	bh = leaf_bh;
+
 	for (blk = leaf_no; blk; blk = nblk) {
-		error = get_leaf(dip, blk, &bh);
-		if (error)
-			goto out_end_trans;
+		if (blk != leaf_no) {
+			error = get_leaf(dip, blk, &bh);
+			if (error)
+				goto out_end_trans;
+		}
 		tmp_leaf = (struct gfs2_leaf *)bh->b_data;
 		nblk = be64_to_cpu(tmp_leaf->lf_next);
-		brelse(bh);
+		if (blk != leaf_no)
+			brelse(bh);
 
 		gfs2_free_meta(dip, blk, 1);
 		gfs2_add_inode_blocks(&dip->i_inode, -1);
@@ -1942,6 +1879,10 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len,
 		goto out_end_trans;
 
 	gfs2_trans_add_bh(dip->i_gl, dibh, 1);
+	/* On the last dealloc, make this a regular file in case we crash.
+	   (We don't want to free these blocks a second time.)  */
+	if (last_dealloc)
+		dip->i_inode.i_mode = S_IFREG;
 	gfs2_dinode_out(dip, dibh->b_data);
 	brelse(dibh);
 
@@ -1975,29 +1916,67 @@ int gfs2_dir_exhash_dealloc(struct gfs2_inode *dip)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
 	struct buffer_head *bh;
-	int error;
+	struct gfs2_leaf *leaf;
+	u32 hsize, len;
+	u32 ht_offset, lp_offset, ht_offset_cur = -1;
+	u32 index = 0, next_index;
+	__be64 *lp;
+	u64 leaf_no;
+	int error = 0, last;
 
-	/* Dealloc on-disk leaves to FREEMETA state */
-	error = foreach_leaf(dip, leaf_dealloc, NULL);
-	if (error)
-		return error;
+	hsize = 1 << dip->i_depth;
+	if (hsize * sizeof(u64) != i_size_read(&dip->i_inode)) {
+		gfs2_consist_inode(dip);
+		return -EIO;
+	}
 
-	/* Make this a regular file in case we crash.
-	   (We don't want to free these blocks a second time.)  */
+	lp = kmalloc(sdp->sd_hash_bsize, GFP_NOFS);
+	if (!lp)
+		return -ENOMEM;
 
-	error = gfs2_trans_begin(sdp, RES_DINODE, 0);
-	if (error)
-		return error;
+	while (index < hsize) {
+		lp_offset = index & (sdp->sd_hash_ptrs - 1);
+		ht_offset = index - lp_offset;
 
-	error = gfs2_meta_inode_buffer(dip, &bh);
-	if (!error) {
-		gfs2_trans_add_bh(dip->i_gl, bh, 1);
-		((struct gfs2_dinode *)bh->b_data)->di_mode =
-						cpu_to_be32(S_IFREG);
-		brelse(bh);
+		if (ht_offset_cur != ht_offset) {
+			error = gfs2_dir_read_data(dip, (char *)lp,
+						ht_offset * sizeof(__be64),
+						sdp->sd_hash_bsize, 1);
+			if (error != sdp->sd_hash_bsize) {
+				if (error >= 0)
+					error = -EIO;
+				goto out;
+			}
+			ht_offset_cur = ht_offset;
+		}
+
+		leaf_no = be64_to_cpu(lp[lp_offset]);
+		if (leaf_no) {
+			error = get_leaf(dip, leaf_no, &bh);
+			if (error)
+				goto out;
+			leaf = (struct gfs2_leaf *)bh->b_data;
+			len = 1 << (dip->i_depth - be16_to_cpu(leaf->lf_depth));
+
+			next_index = (index & ~(len - 1)) + len;
+			last = ((next_index >= hsize) ? 1 : 0);
+			error = leaf_dealloc(dip, index, len, leaf_no, bh,
+					     last);
+			brelse(bh);
+			if (error)
+				goto out;
+			index = next_index;
+		} else
+			index++;
 	}
 
-	gfs2_trans_end(sdp);
+	if (index != hsize) {
+		gfs2_consist_inode(dip);
+		error = -EIO;
+	}
+
+out:
+	kfree(lp);
 
 	return error;
 }
diff --git a/fs/gfs2/dir.h b/fs/gfs2/dir.h
index a98f644bd3d..e686af11bec 100644
--- a/fs/gfs2/dir.h
+++ b/fs/gfs2/dir.h
@@ -22,8 +22,8 @@ extern struct inode *gfs2_dir_search(struct inode *dir,
 extern int gfs2_dir_check(struct inode *dir, const struct qstr *filename,
 			  const struct gfs2_inode *ip);
 extern int gfs2_dir_add(struct inode *inode, const struct qstr *filename,
-			const struct gfs2_inode *ip, unsigned int type);
-extern int gfs2_dir_del(struct gfs2_inode *dip, const struct qstr *filename);
+			const struct gfs2_inode *ip);
+extern int gfs2_dir_del(struct gfs2_inode *dip, const struct dentry *dentry);
 extern int gfs2_dir_read(struct inode *inode, u64 *offset, void *opaque,
 			 filldir_t filldir);
 extern int gfs2_dir_mvino(struct gfs2_inode *dip, const struct qstr *filename,
diff --git a/fs/gfs2/export.c b/fs/gfs2/export.c
index b5a5e60df0d..fe9945f2ff7 100644
--- a/fs/gfs2/export.c
+++ b/fs/gfs2/export.c
@@ -139,7 +139,7 @@ static struct dentry *gfs2_get_dentry(struct super_block *sb,
 	struct gfs2_sbd *sdp = sb->s_fs_info;
 	struct inode *inode;
 
-	inode = gfs2_ilookup(sb, inum->no_addr);
+	inode = gfs2_ilookup(sb, inum->no_addr, 0);
 	if (inode) {
 		if (GFS2_I(inode)->i_no_formal_ino != inum->no_formal_ino) {
 			iput(inode);
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index b2682e073ee..a9f5cbe45cd 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -545,18 +545,10 @@ static int gfs2_close(struct inode *inode, struct file *file)
 /**
  * gfs2_fsync - sync the dirty data for a file (across the cluster)
  * @file: the file that points to the dentry (we ignore this)
- * @dentry: the dentry that points to the inode to sync
+ * @datasync: set if we can ignore timestamp changes
  *
- * The VFS will flush "normal" data for us. We only need to worry
- * about metadata here. For journaled data, we just do a log flush
- * as we can't avoid it. Otherwise we can just bale out if datasync
- * is set. For stuffed inodes we must flush the log in order to
- * ensure that all data is on disk.
- *
- * The call to write_inode_now() is there to write back metadata and
- * the inode itself. It does also try and write the data, but thats
- * (hopefully) a no-op due to the VFS having already called filemap_fdatawrite()
- * for us.
+ * The VFS will flush data for us. We only need to worry
+ * about metadata here.
  *
  * Returns: errno
  */
@@ -565,22 +557,20 @@ static int gfs2_fsync(struct file *file, int datasync)
 {
 	struct inode *inode = file->f_mapping->host;
 	int sync_state = inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC);
-	int ret = 0;
-
-	if (gfs2_is_jdata(GFS2_I(inode))) {
-		gfs2_log_flush(GFS2_SB(inode), GFS2_I(inode)->i_gl);
-		return 0;
-	}
+	struct gfs2_inode *ip = GFS2_I(inode);
+	int ret;
 
-	if (sync_state != 0) {
-		if (!datasync)
-			ret = write_inode_now(inode, 0);
+	if (datasync)
+		sync_state &= ~I_DIRTY_SYNC;
 
-		if (gfs2_is_stuffed(GFS2_I(inode)))
-			gfs2_log_flush(GFS2_SB(inode), GFS2_I(inode)->i_gl);
+	if (sync_state) {
+		ret = sync_inode_metadata(inode, 1);
+		if (ret)
+			return ret;
+		gfs2_ail_flush(ip->i_gl);
 	}
 
-	return ret;
+	return 0;
 }
 
 /**
@@ -617,18 +607,51 @@ static ssize_t gfs2_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
 	return generic_file_aio_write(iocb, iov, nr_segs, pos);
 }
 
-static void empty_write_end(struct page *page, unsigned from,
-			   unsigned to)
+static int empty_write_end(struct page *page, unsigned from,
+			   unsigned to, int mode)
 {
-	struct gfs2_inode *ip = GFS2_I(page->mapping->host);
+	struct inode *inode = page->mapping->host;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct buffer_head *bh;
+	unsigned offset, blksize = 1 << inode->i_blkbits;
+	pgoff_t end_index = i_size_read(inode) >> PAGE_CACHE_SHIFT;
 
 	zero_user(page, from, to-from);
 	mark_page_accessed(page);
 
-	if (!gfs2_is_writeback(ip))
-		gfs2_page_add_databufs(ip, page, from, to);
+	if (page->index < end_index || !(mode & FALLOC_FL_KEEP_SIZE)) {
+		if (!gfs2_is_writeback(ip))
+			gfs2_page_add_databufs(ip, page, from, to);
 
-	block_commit_write(page, from, to);
+		block_commit_write(page, from, to);
+		return 0;
+	}
+
+	offset = 0;
+	bh = page_buffers(page);
+	while (offset < to) {
+		if (offset >= from) {
+			set_buffer_uptodate(bh);
+			mark_buffer_dirty(bh);
+			clear_buffer_new(bh);
+			write_dirty_buffer(bh, WRITE);
+		}
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+
+	offset = 0;
+	bh = page_buffers(page);
+	while (offset < to) {
+		if (offset >= from) {
+			wait_on_buffer(bh);
+			if (!buffer_uptodate(bh))
+				return -EIO;
+		}
+		offset += blksize;
+		bh = bh->b_this_page;
+	}
+	return 0;
 }
 
 static int needs_empty_write(sector_t block, struct inode *inode)
@@ -643,7 +666,8 @@ static int needs_empty_write(sector_t block, struct inode *inode)
 	return !buffer_mapped(&bh_map);
 }
 
-static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
+static int write_empty_blocks(struct page *page, unsigned from, unsigned to,
+			      int mode)
 {
 	struct inode *inode = page->mapping->host;
 	unsigned start, end, next, blksize;
@@ -668,7 +692,9 @@ static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
 							  gfs2_block_map);
 				if (unlikely(ret))
 					return ret;
-				empty_write_end(page, start, end);
+				ret = empty_write_end(page, start, end, mode);
+				if (unlikely(ret))
+					return ret;
 				end = 0;
 			}
 			start = next;
@@ -682,7 +708,9 @@ static int write_empty_blocks(struct page *page, unsigned from, unsigned to)
 		ret = __block_write_begin(page, start, end - start, gfs2_block_map);
 		if (unlikely(ret))
 			return ret;
-		empty_write_end(page, start, end);
+		ret = empty_write_end(page, start, end, mode);
+		if (unlikely(ret))
+			return ret;
 	}
 
 	return 0;
@@ -731,7 +759,7 @@ static int fallocate_chunk(struct inode *inode, loff_t offset, loff_t len,
 
 		if (curr == end)
 			to = end_offset;
-		error = write_empty_blocks(page, from, to);
+		error = write_empty_blocks(page, from, to, mode);
 		if (!error && offset + to > inode->i_size &&
 		    !(mode & FALLOC_FL_KEEP_SIZE)) {
 			i_size_write(inode, offset + to);
@@ -788,6 +816,7 @@ static long gfs2_fallocate(struct file *file, int mode, loff_t offset,
 	loff_t bytes, max_bytes;
 	struct gfs2_alloc *al;
 	int error;
+	loff_t bsize_mask = ~((loff_t)sdp->sd_sb.sb_bsize - 1);
 	loff_t next = (offset + len - 1) >> sdp->sd_sb.sb_bsize_shift;
 	next = (next + 1) << sdp->sd_sb.sb_bsize_shift;
 
@@ -795,13 +824,15 @@ static long gfs2_fallocate(struct file *file, int mode, loff_t offset,
 	if (mode & ~FALLOC_FL_KEEP_SIZE)
 		return -EOPNOTSUPP;
 
-	offset = (offset >> sdp->sd_sb.sb_bsize_shift) <<
-		 sdp->sd_sb.sb_bsize_shift;
+	offset &= bsize_mask;
 
 	len = next - offset;
 	bytes = sdp->sd_max_rg_data * sdp->sd_sb.sb_bsize / 2;
 	if (!bytes)
 		bytes = UINT_MAX;
+	bytes &= bsize_mask;
+	if (bytes == 0)
+		bytes = sdp->sd_sb.sb_bsize;
 
 	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &ip->i_gh);
 	error = gfs2_glock_nq(&ip->i_gh);
@@ -832,6 +863,9 @@ retry:
 		if (error) {
 			if (error == -ENOSPC && bytes > sdp->sd_sb.sb_bsize) {
 				bytes >>= 1;
+				bytes &= bsize_mask;
+				if (bytes == 0)
+					bytes = sdp->sd_sb.sb_bsize;
 				goto retry;
 			}
 			goto out_qunlock;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index e2431313491..a2a6abbccc0 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -93,14 +93,12 @@ static unsigned int gl_hash(const struct gfs2_sbd *sdp,
 
 static inline void spin_lock_bucket(unsigned int hash)
 {
-	struct hlist_bl_head *bl = &gl_hash_table[hash];
-	bit_spin_lock(0, (unsigned long *)bl);
+	hlist_bl_lock(&gl_hash_table[hash]);
 }
 
 static inline void spin_unlock_bucket(unsigned int hash)
 {
-	struct hlist_bl_head *bl = &gl_hash_table[hash];
-	__bit_spin_unlock(0, (unsigned long *)bl);
+	hlist_bl_unlock(&gl_hash_table[hash]);
 }
 
 static void gfs2_glock_dealloc(struct rcu_head *rcu)
@@ -145,14 +143,9 @@ static int demote_ok(const struct gfs2_glock *gl)
 {
 	const struct gfs2_glock_operations *glops = gl->gl_ops;
 
-	/* assert_spin_locked(&gl->gl_spin); */
-
 	if (gl->gl_state == LM_ST_UNLOCKED)
 		return 0;
-	if (test_bit(GLF_LFLUSH, &gl->gl_flags))
-		return 0;
-	if ((gl->gl_name.ln_type != LM_TYPE_INODE) &&
-	    !list_empty(&gl->gl_holders))
+	if (!list_empty(&gl->gl_holders))
 		return 0;
 	if (glops->go_demote_ok)
 		return glops->go_demote_ok(gl);
@@ -160,6 +153,31 @@ static int demote_ok(const struct gfs2_glock *gl)
 }
 
 
+void gfs2_glock_add_to_lru(struct gfs2_glock *gl)
+{
+	spin_lock(&lru_lock);
+
+	if (!list_empty(&gl->gl_lru))
+		list_del_init(&gl->gl_lru);
+	else
+		atomic_inc(&lru_count);
+
+	list_add_tail(&gl->gl_lru, &lru_list);
+	set_bit(GLF_LRU, &gl->gl_flags);
+	spin_unlock(&lru_lock);
+}
+
+static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
+{
+	spin_lock(&lru_lock);
+	if (!list_empty(&gl->gl_lru)) {
+		list_del_init(&gl->gl_lru);
+		atomic_dec(&lru_count);
+		clear_bit(GLF_LRU, &gl->gl_flags);
+	}
+	spin_unlock(&lru_lock);
+}
+
 /**
  * __gfs2_glock_schedule_for_reclaim - Add a glock to the reclaim list
  * @gl: the glock
@@ -170,24 +188,8 @@ static int demote_ok(const struct gfs2_glock *gl)
 
 static void __gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
 {
-	if (demote_ok(gl)) {
-		spin_lock(&lru_lock);
-
-		if (!list_empty(&gl->gl_lru))
-			list_del_init(&gl->gl_lru);
-		else
-			atomic_inc(&lru_count);
-
-		list_add_tail(&gl->gl_lru, &lru_list);
-		spin_unlock(&lru_lock);
-	}
-}
-
-void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
-{
-	spin_lock(&gl->gl_spin);
-	__gfs2_glock_schedule_for_reclaim(gl);
-	spin_unlock(&gl->gl_spin);
+	if (demote_ok(gl))
+		gfs2_glock_add_to_lru(gl);
 }
 
 /**
@@ -219,12 +221,7 @@ void gfs2_glock_put(struct gfs2_glock *gl)
 		spin_lock_bucket(gl->gl_hash);
 		hlist_bl_del_rcu(&gl->gl_list);
 		spin_unlock_bucket(gl->gl_hash);
-		spin_lock(&lru_lock);
-		if (!list_empty(&gl->gl_lru)) {
-			list_del_init(&gl->gl_lru);
-			atomic_dec(&lru_count);
-		}
-		spin_unlock(&lru_lock);
+		gfs2_glock_remove_from_lru(gl);
 		GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
 		GLOCK_BUG_ON(gl, mapping && mapping->nrpages);
 		trace_gfs2_glock_put(gl);
@@ -544,11 +541,6 @@ __acquires(&gl->gl_spin)
 	clear_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags);
 
 	gfs2_glock_hold(gl);
-	if (target != LM_ST_UNLOCKED && (gl->gl_state == LM_ST_SHARED ||
-	    gl->gl_state == LM_ST_DEFERRED) &&
-	    !(lck_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
-		lck_flags |= LM_FLAG_TRY_1CB;
-
 	if (sdp->sd_lockstruct.ls_ops->lm_lock)	{
 		/* lock_dlm */
 		ret = sdp->sd_lockstruct.ls_ops->lm_lock(gl, target, lck_flags);
@@ -650,7 +642,7 @@ static void delete_work_func(struct work_struct *work)
 	/* Note: Unsafe to dereference ip as we don't hold right refs/locks */
 
 	if (ip)
-		inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
+		inode = gfs2_ilookup(sdp->sd_vfs, no_addr, 1);
 	else
 		inode = gfs2_lookup_by_inum(sdp, no_addr, NULL, GFS2_BLKST_UNLINKED);
 	if (inode && !IS_ERR(inode)) {
@@ -1027,6 +1019,9 @@ int gfs2_glock_nq(struct gfs2_holder *gh)
 	if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
 		return -EIO;
 
+	if (test_bit(GLF_LRU, &gl->gl_flags))
+		gfs2_glock_remove_from_lru(gl);
+
 	spin_lock(&gl->gl_spin);
 	add_to_queue(gh);
 	if ((LM_FLAG_NOEXP & gh->gh_flags) &&
@@ -1084,7 +1079,8 @@ void gfs2_glock_dq(struct gfs2_holder *gh)
 		    !test_bit(GLF_DEMOTE, &gl->gl_flags))
 			fast_path = 1;
 	}
-	__gfs2_glock_schedule_for_reclaim(gl);
+	if (!test_bit(GLF_LFLUSH, &gl->gl_flags))
+		__gfs2_glock_schedule_for_reclaim(gl);
 	trace_gfs2_glock_queue(gh, 0);
 	spin_unlock(&gl->gl_spin);
 	if (likely(fast_path))
@@ -1123,7 +1119,7 @@ void gfs2_glock_dq_uninit(struct gfs2_holder *gh)
  * @number: the lock number
  * @glops: the glock operations for the type of glock
  * @state: the state to acquire the glock in
- * @flags: modifier flags for the aquisition
+ * @flags: modifier flags for the acquisition
  * @gh: the struct gfs2_holder
  *
  * Returns: errno
@@ -1367,6 +1363,7 @@ static int gfs2_shrink_glock_memory(struct shrinker *shrink, int nr, gfp_t gfp_m
 	while(nr && !list_empty(&lru_list)) {
 		gl = list_entry(lru_list.next, struct gfs2_glock, gl_lru);
 		list_del_init(&gl->gl_lru);
+		clear_bit(GLF_LRU, &gl->gl_flags);
 		atomic_dec(&lru_count);
 
 		/* Test for being demotable */
@@ -1389,6 +1386,7 @@ static int gfs2_shrink_glock_memory(struct shrinker *shrink, int nr, gfp_t gfp_m
 		}
 		nr_skipped++;
 		list_add(&gl->gl_lru, &skipped);
+		set_bit(GLF_LRU, &gl->gl_flags);
 	}
 	list_splice(&skipped, &lru_list);
 	atomic_add(nr_skipped, &lru_count);
@@ -1461,12 +1459,7 @@ static void thaw_glock(struct gfs2_glock *gl)
 
 static void clear_glock(struct gfs2_glock *gl)
 {
-	spin_lock(&lru_lock);
-	if (!list_empty(&gl->gl_lru)) {
-		list_del_init(&gl->gl_lru);
-		atomic_dec(&lru_count);
-	}
-	spin_unlock(&lru_lock);
+	gfs2_glock_remove_from_lru(gl);
 
 	spin_lock(&gl->gl_spin);
 	if (gl->gl_state != LM_ST_UNLOCKED)
@@ -1601,9 +1594,11 @@ static int dump_holder(struct seq_file *seq, const struct gfs2_holder *gh)
 	return 0;
 }
 
-static const char *gflags2str(char *buf, const unsigned long *gflags)
+static const char *gflags2str(char *buf, const struct gfs2_glock *gl)
 {
+	const unsigned long *gflags = &gl->gl_flags;
 	char *p = buf;
+
 	if (test_bit(GLF_LOCK, gflags))
 		*p++ = 'l';
 	if (test_bit(GLF_DEMOTE, gflags))
@@ -1626,6 +1621,10 @@ static const char *gflags2str(char *buf, const unsigned long *gflags)
 		*p++ = 'F';
 	if (test_bit(GLF_QUEUED, gflags))
 		*p++ = 'q';
+	if (test_bit(GLF_LRU, gflags))
+		*p++ = 'L';
+	if (gl->gl_object)
+		*p++ = 'o';
 	*p = 0;
 	return buf;
 }
@@ -1660,14 +1659,15 @@ static int __dump_glock(struct seq_file *seq, const struct gfs2_glock *gl)
 	dtime *= 1000000/HZ; /* demote time in uSec */
 	if (!test_bit(GLF_DEMOTE, &gl->gl_flags))
 		dtime = 0;
-	gfs2_print_dbg(seq, "G:  s:%s n:%u/%llx f:%s t:%s d:%s/%llu a:%d r:%d\n",
+	gfs2_print_dbg(seq, "G:  s:%s n:%u/%llx f:%s t:%s d:%s/%llu a:%d v:%d r:%d\n",
 		  state2str(gl->gl_state),
 		  gl->gl_name.ln_type,
 		  (unsigned long long)gl->gl_name.ln_number,
-		  gflags2str(gflags_buf, &gl->gl_flags),
+		  gflags2str(gflags_buf, gl),
 		  state2str(gl->gl_target),
 		  state2str(gl->gl_demote_state), dtime,
 		  atomic_read(&gl->gl_ail_count),
+		  atomic_read(&gl->gl_revokes),
 		  atomic_read(&gl->gl_ref));
 
 	list_for_each_entry(gh, &gl->gl_holders, gh_list) {
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index aea160690e9..6b2f757b928 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -225,11 +225,10 @@ static inline int gfs2_glock_nq_init(struct gfs2_glock *gl,
 
 extern void gfs2_glock_cb(struct gfs2_glock *gl, unsigned int state);
 extern void gfs2_glock_complete(struct gfs2_glock *gl, int ret);
-extern void gfs2_reclaim_glock(struct gfs2_sbd *sdp);
 extern void gfs2_gl_hash_clear(struct gfs2_sbd *sdp);
 extern void gfs2_glock_finish_truncate(struct gfs2_inode *ip);
 extern void gfs2_glock_thaw(struct gfs2_sbd *sdp);
-extern void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl);
+extern void gfs2_glock_add_to_lru(struct gfs2_glock *gl);
 extern void gfs2_glock_free(struct gfs2_glock *gl);
 
 extern int __init gfs2_glock_init(void);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index 3754e3cbf02..8ef70f46473 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -28,33 +28,18 @@
 #include "trans.h"
 
 /**
- * ail_empty_gl - remove all buffers for a given lock from the AIL
+ * __gfs2_ail_flush - remove all buffers for a given lock from the AIL
  * @gl: the glock
  *
  * None of the buffers should be dirty, locked, or pinned.
  */
 
-static void gfs2_ail_empty_gl(struct gfs2_glock *gl)
+static void __gfs2_ail_flush(struct gfs2_glock *gl)
 {
 	struct gfs2_sbd *sdp = gl->gl_sbd;
 	struct list_head *head = &gl->gl_ail_list;
 	struct gfs2_bufdata *bd;
 	struct buffer_head *bh;
-	struct gfs2_trans tr;
-
-	memset(&tr, 0, sizeof(tr));
-	tr.tr_revokes = atomic_read(&gl->gl_ail_count);
-
-	if (!tr.tr_revokes)
-		return;
-
-	/* A shortened, inline version of gfs2_trans_begin() */
-	tr.tr_reserved = 1 + gfs2_struct2blk(sdp, tr.tr_revokes, sizeof(u64));
-	tr.tr_ip = (unsigned long)__builtin_return_address(0);
-	INIT_LIST_HEAD(&tr.tr_list_buf);
-	gfs2_log_reserve(sdp, tr.tr_reserved);
-	BUG_ON(current->journal_info);
-	current->journal_info = &tr;
 
 	spin_lock(&sdp->sd_ail_lock);
 	while (!list_empty(head)) {
@@ -76,11 +61,51 @@ static void gfs2_ail_empty_gl(struct gfs2_glock *gl)
 	}
 	gfs2_assert_withdraw(sdp, !atomic_read(&gl->gl_ail_count));
 	spin_unlock(&sdp->sd_ail_lock);
+}
+
+
+static void gfs2_ail_empty_gl(struct gfs2_glock *gl)
+{
+	struct gfs2_sbd *sdp = gl->gl_sbd;
+	struct gfs2_trans tr;
+
+	memset(&tr, 0, sizeof(tr));
+	tr.tr_revokes = atomic_read(&gl->gl_ail_count);
+
+	if (!tr.tr_revokes)
+		return;
+
+	/* A shortened, inline version of gfs2_trans_begin() */
+	tr.tr_reserved = 1 + gfs2_struct2blk(sdp, tr.tr_revokes, sizeof(u64));
+	tr.tr_ip = (unsigned long)__builtin_return_address(0);
+	INIT_LIST_HEAD(&tr.tr_list_buf);
+	gfs2_log_reserve(sdp, tr.tr_reserved);
+	BUG_ON(current->journal_info);
+	current->journal_info = &tr;
+
+	__gfs2_ail_flush(gl);
 
 	gfs2_trans_end(sdp);
 	gfs2_log_flush(sdp, NULL);
 }
 
+void gfs2_ail_flush(struct gfs2_glock *gl)
+{
+	struct gfs2_sbd *sdp = gl->gl_sbd;
+	unsigned int revokes = atomic_read(&gl->gl_ail_count);
+	int ret;
+
+	if (!revokes)
+		return;
+
+	ret = gfs2_trans_begin(sdp, 0, revokes);
+	if (ret)
+		return;
+	__gfs2_ail_flush(gl);
+	gfs2_trans_end(sdp);
+	gfs2_log_flush(sdp, NULL);
+}
+
 /**
  * rgrp_go_sync - sync out the metadata for this glock
  * @gl: the glock
@@ -227,6 +252,119 @@ static int inode_go_demote_ok(const struct gfs2_glock *gl)
 }
 
 /**
+ * gfs2_set_nlink - Set the inode's link count based on on-disk info
+ * @inode: The inode in question
+ * @nlink: The link count
+ *
+ * If the link count has hit zero, it must never be raised, whatever the
+ * on-disk inode might say. When new struct inodes are created the link
+ * count is set to 1, so that we can safely use this test even when reading
+ * in on disk information for the first time.
+ */
+
+static void gfs2_set_nlink(struct inode *inode, u32 nlink)
+{
+	/*
+	 * We will need to review setting the nlink count here in the
+	 * light of the forthcoming ro bind mount work. This is a reminder
+	 * to do that.
+	 */
+	if ((inode->i_nlink != nlink) && (inode->i_nlink != 0)) {
+		if (nlink == 0)
+			clear_nlink(inode);
+		else
+			inode->i_nlink = nlink;
+	}
+}
+
+static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
+{
+	const struct gfs2_dinode *str = buf;
+	struct timespec atime;
+	u16 height, depth;
+
+	if (unlikely(ip->i_no_addr != be64_to_cpu(str->di_num.no_addr)))
+		goto corrupt;
+	ip->i_no_formal_ino = be64_to_cpu(str->di_num.no_formal_ino);
+	ip->i_inode.i_mode = be32_to_cpu(str->di_mode);
+	ip->i_inode.i_rdev = 0;
+	switch (ip->i_inode.i_mode & S_IFMT) {
+	case S_IFBLK:
+	case S_IFCHR:
+		ip->i_inode.i_rdev = MKDEV(be32_to_cpu(str->di_major),
+					   be32_to_cpu(str->di_minor));
+		break;
+	};
+
+	ip->i_inode.i_uid = be32_to_cpu(str->di_uid);
+	ip->i_inode.i_gid = be32_to_cpu(str->di_gid);
+	gfs2_set_nlink(&ip->i_inode, be32_to_cpu(str->di_nlink));
+	i_size_write(&ip->i_inode, be64_to_cpu(str->di_size));
+	gfs2_set_inode_blocks(&ip->i_inode, be64_to_cpu(str->di_blocks));
+	atime.tv_sec = be64_to_cpu(str->di_atime);
+	atime.tv_nsec = be32_to_cpu(str->di_atime_nsec);
+	if (timespec_compare(&ip->i_inode.i_atime, &atime) < 0)
+		ip->i_inode.i_atime = atime;
+	ip->i_inode.i_mtime.tv_sec = be64_to_cpu(str->di_mtime);
+	ip->i_inode.i_mtime.tv_nsec = be32_to_cpu(str->di_mtime_nsec);
+	ip->i_inode.i_ctime.tv_sec = be64_to_cpu(str->di_ctime);
+	ip->i_inode.i_ctime.tv_nsec = be32_to_cpu(str->di_ctime_nsec);
+
+	ip->i_goal = be64_to_cpu(str->di_goal_meta);
+	ip->i_generation = be64_to_cpu(str->di_generation);
+
+	ip->i_diskflags = be32_to_cpu(str->di_flags);
+	gfs2_set_inode_flags(&ip->i_inode);
+	height = be16_to_cpu(str->di_height);
+	if (unlikely(height > GFS2_MAX_META_HEIGHT))
+		goto corrupt;
+	ip->i_height = (u8)height;
+
+	depth = be16_to_cpu(str->di_depth);
+	if (unlikely(depth > GFS2_DIR_MAX_DEPTH))
+		goto corrupt;
+	ip->i_depth = (u8)depth;
+	ip->i_entries = be32_to_cpu(str->di_entries);
+
+	ip->i_eattr = be64_to_cpu(str->di_eattr);
+	if (S_ISREG(ip->i_inode.i_mode))
+		gfs2_set_aops(&ip->i_inode);
+
+	return 0;
+corrupt:
+	gfs2_consist_inode(ip);
+	return -EIO;
+}
+
+/**
+ * gfs2_inode_refresh - Refresh the incore copy of the dinode
+ * @ip: The GFS2 inode
+ *
+ * Returns: errno
+ */
+
+int gfs2_inode_refresh(struct gfs2_inode *ip)
+{
+	struct buffer_head *dibh;
+	int error;
+
+	error = gfs2_meta_inode_buffer(ip, &dibh);
+	if (error)
+		return error;
+
+	if (gfs2_metatype_check(GFS2_SB(&ip->i_inode), dibh, GFS2_METATYPE_DI)) {
+		brelse(dibh);
+		return -EIO;
+	}
+
+	error = gfs2_dinode_in(ip, dibh->b_data);
+	brelse(dibh);
+	clear_bit(GIF_INVALID, &ip->i_flags);
+
+	return error;
+}
+
+/**
  * inode_go_lock - operation done after an inode lock is locked by a process
  * @gl: the glock
  * @flags:
@@ -385,6 +523,10 @@ static int trans_go_demote_ok(const struct gfs2_glock *gl)
 static void iopen_go_callback(struct gfs2_glock *gl)
 {
 	struct gfs2_inode *ip = (struct gfs2_inode *)gl->gl_object;
+	struct gfs2_sbd *sdp = gl->gl_sbd;
+
+	if (sdp->sd_vfs->s_flags & MS_RDONLY)
+		return;
 
 	if (gl->gl_demote_state == LM_ST_UNLOCKED &&
 	    gl->gl_state == LM_ST_SHARED && ip) {
diff --git a/fs/gfs2/glops.h b/fs/gfs2/glops.h
index b3aa2e3210f..6fce409b5a5 100644
--- a/fs/gfs2/glops.h
+++ b/fs/gfs2/glops.h
@@ -23,4 +23,6 @@ extern const struct gfs2_glock_operations gfs2_quota_glops;
 extern const struct gfs2_glock_operations gfs2_journal_glops;
 extern const struct gfs2_glock_operations *gfs2_glops_list[];
 
+extern void gfs2_ail_flush(struct gfs2_glock *gl);
+
 #endif /* __GLOPS_DOT_H__ */
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 870a89d6d4d..0a064e91ac7 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -20,7 +20,6 @@
 
 #define DIO_WAIT	0x00000010
 #define DIO_METADATA	0x00000020
-#define DIO_ALL		0x00000100
 
 struct gfs2_log_operations;
 struct gfs2_log_element;
@@ -200,6 +199,8 @@ enum {
 	GLF_INITIAL			= 10,
 	GLF_FROZEN			= 11,
 	GLF_QUEUED			= 12,
+	GLF_LRU				= 13,
+	GLF_OBJECT			= 14, /* Used only for tracing */
 };
 
 struct gfs2_glock {
@@ -234,6 +235,7 @@ struct gfs2_glock {
 
 	struct list_head gl_ail_list;
 	atomic_t gl_ail_count;
+	atomic_t gl_revokes;
 	struct delayed_work gl_work;
 	struct work_struct gl_delete;
 	struct rcu_head gl_rcu;
@@ -374,8 +376,6 @@ struct gfs2_ail {
 	unsigned int ai_first;
 	struct list_head ai_ail1_list;
 	struct list_head ai_ail2_list;
-
-	u64 ai_sync_gen;
 };
 
 struct gfs2_journal_extent {
@@ -488,7 +488,6 @@ struct gfs2_sb_host {
 
 	char sb_lockproto[GFS2_LOCKNAME_LEN];
 	char sb_locktable[GFS2_LOCKNAME_LEN];
-	u8 sb_uuid[16];
 };
 
 /*
@@ -654,7 +653,6 @@ struct gfs2_sbd {
 	spinlock_t sd_ail_lock;
 	struct list_head sd_ail1_list;
 	struct list_head sd_ail2_list;
-	u64 sd_ail_sync_gen;
 
 	/* Replay stuff */
 
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 97d54a28776..03e0c529063 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -1,23 +1,25 @@
 /*
  * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
- * Copyright (C) 2004-2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2004-2011 Red Hat, Inc.  All rights reserved.
  *
  * This copyrighted material is made available to anyone wishing to use,
  * modify, copy, or redistribute it subject to the terms and conditions
  * of the GNU General Public License version 2.
  */
 
-#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/completion.h>
 #include <linux/buffer_head.h>
+#include <linux/namei.h>
+#include <linux/mm.h>
+#include <linux/xattr.h>
 #include <linux/posix_acl.h>
-#include <linux/sort.h>
 #include <linux/gfs2_ondisk.h>
 #include <linux/crc32.h>
+#include <linux/fiemap.h>
 #include <linux/security.h>
-#include <linux/time.h>
+#include <asm/uaccess.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -26,51 +28,70 @@
 #include "dir.h"
 #include "xattr.h"
 #include "glock.h"
-#include "glops.h"
 #include "inode.h"
-#include "log.h"
 #include "meta_io.h"
 #include "quota.h"
 #include "rgrp.h"
 #include "trans.h"
 #include "util.h"
+#include "super.h"
+#include "glops.h"
 
-struct gfs2_inum_range_host {
-	u64 ir_start;
-	u64 ir_length;
+struct gfs2_skip_data {
+	u64 no_addr;
+	int skipped;
+	int non_block;
 };
 
 static int iget_test(struct inode *inode, void *opaque)
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
-	u64 *no_addr = opaque;
+	struct gfs2_skip_data *data = opaque;
 
-	if (ip->i_no_addr == *no_addr)
+	if (ip->i_no_addr == data->no_addr) {
+		if (data->non_block &&
+		    inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) {
+			data->skipped = 1;
+			return 0;
+		}
 		return 1;
-
+	}
 	return 0;
 }
 
 static int iget_set(struct inode *inode, void *opaque)
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
-	u64 *no_addr = opaque;
+	struct gfs2_skip_data *data = opaque;
 
-	inode->i_ino = (unsigned long)*no_addr;
-	ip->i_no_addr = *no_addr;
+	if (data->skipped)
+		return -ENOENT;
+	inode->i_ino = (unsigned long)(data->no_addr);
+	ip->i_no_addr = data->no_addr;
 	return 0;
 }
 
-struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr)
+struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr, int non_block)
 {
 	unsigned long hash = (unsigned long)no_addr;
-	return ilookup5(sb, hash, iget_test, &no_addr);
+	struct gfs2_skip_data data;
+
+	data.no_addr = no_addr;
+	data.skipped = 0;
+	data.non_block = non_block;
+	return ilookup5(sb, hash, iget_test, &data);
 }
 
-static struct inode *gfs2_iget(struct super_block *sb, u64 no_addr)
+static struct inode *gfs2_iget(struct super_block *sb, u64 no_addr,
+			       int non_block)
 {
+	struct gfs2_skip_data data;
 	unsigned long hash = (unsigned long)no_addr;
-	return iget5_locked(sb, hash, iget_test, iget_set, &no_addr);
+
+	data.no_addr = no_addr;
+	data.skipped = 0;
+	data.non_block = non_block;
+	return iget5_locked(sb, hash, iget_test, iget_set, &data);
 }
 
 /**
@@ -111,19 +132,20 @@ static void gfs2_set_iop(struct inode *inode)
  * @sb: The super block
  * @no_addr: The inode number
  * @type: The type of the inode
+ * non_block: Can we block on inodes that are being freed?
  *
  * Returns: A VFS inode, or an error
  */
 
 struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned int type,
-				u64 no_addr, u64 no_formal_ino)
+				u64 no_addr, u64 no_formal_ino, int non_block)
 {
 	struct inode *inode;
 	struct gfs2_inode *ip;
 	struct gfs2_glock *io_gl = NULL;
 	int error;
 
-	inode = gfs2_iget(sb, no_addr);
+	inode = gfs2_iget(sb, no_addr, non_block);
 	ip = GFS2_I(inode);
 
 	if (!inode)
@@ -185,11 +207,12 @@ struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
 {
 	struct super_block *sb = sdp->sd_vfs;
 	struct gfs2_holder i_gh;
-	struct inode *inode;
+	struct inode *inode = NULL;
 	int error;
 
+	/* Must not read in block until block type is verified */
 	error = gfs2_glock_nq_num(sdp, no_addr, &gfs2_inode_glops,
-				  LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
+				  LM_ST_EXCLUSIVE, GL_SKIP, &i_gh);
 	if (error)
 		return ERR_PTR(error);
 
@@ -197,7 +220,7 @@ struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
 	if (error)
 		goto fail;
 
-	inode = gfs2_inode_lookup(sb, DT_UNKNOWN, no_addr, 0);
+	inode = gfs2_inode_lookup(sb, DT_UNKNOWN, no_addr, 0, 1);
 	if (IS_ERR(inode))
 		goto fail;
 
@@ -222,203 +245,6 @@ fail_iput:
 	goto fail;
 }
 
-static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
-{
-	const struct gfs2_dinode *str = buf;
-	struct timespec atime;
-	u16 height, depth;
-
-	if (unlikely(ip->i_no_addr != be64_to_cpu(str->di_num.no_addr)))
-		goto corrupt;
-	ip->i_no_formal_ino = be64_to_cpu(str->di_num.no_formal_ino);
-	ip->i_inode.i_mode = be32_to_cpu(str->di_mode);
-	ip->i_inode.i_rdev = 0;
-	switch (ip->i_inode.i_mode & S_IFMT) {
-	case S_IFBLK:
-	case S_IFCHR:
-		ip->i_inode.i_rdev = MKDEV(be32_to_cpu(str->di_major),
-					   be32_to_cpu(str->di_minor));
-		break;
-	};
-
-	ip->i_inode.i_uid = be32_to_cpu(str->di_uid);
-	ip->i_inode.i_gid = be32_to_cpu(str->di_gid);
-	/*
-	 * We will need to review setting the nlink count here in the
-	 * light of the forthcoming ro bind mount work. This is a reminder
-	 * to do that.
-	 */
-	ip->i_inode.i_nlink = be32_to_cpu(str->di_nlink);
-	i_size_write(&ip->i_inode, be64_to_cpu(str->di_size));
-	gfs2_set_inode_blocks(&ip->i_inode, be64_to_cpu(str->di_blocks));
-	atime.tv_sec = be64_to_cpu(str->di_atime);
-	atime.tv_nsec = be32_to_cpu(str->di_atime_nsec);
-	if (timespec_compare(&ip->i_inode.i_atime, &atime) < 0)
-		ip->i_inode.i_atime = atime;
-	ip->i_inode.i_mtime.tv_sec = be64_to_cpu(str->di_mtime);
-	ip->i_inode.i_mtime.tv_nsec = be32_to_cpu(str->di_mtime_nsec);
-	ip->i_inode.i_ctime.tv_sec = be64_to_cpu(str->di_ctime);
-	ip->i_inode.i_ctime.tv_nsec = be32_to_cpu(str->di_ctime_nsec);
-
-	ip->i_goal = be64_to_cpu(str->di_goal_meta);
-	ip->i_generation = be64_to_cpu(str->di_generation);
-
-	ip->i_diskflags = be32_to_cpu(str->di_flags);
-	gfs2_set_inode_flags(&ip->i_inode);
-	height = be16_to_cpu(str->di_height);
-	if (unlikely(height > GFS2_MAX_META_HEIGHT))
-		goto corrupt;
-	ip->i_height = (u8)height;
-
-	depth = be16_to_cpu(str->di_depth);
-	if (unlikely(depth > GFS2_DIR_MAX_DEPTH))
-		goto corrupt;
-	ip->i_depth = (u8)depth;
-	ip->i_entries = be32_to_cpu(str->di_entries);
-
-	ip->i_eattr = be64_to_cpu(str->di_eattr);
-	if (S_ISREG(ip->i_inode.i_mode))
-		gfs2_set_aops(&ip->i_inode);
-
-	return 0;
-corrupt:
-	if (gfs2_consist_inode(ip))
-		gfs2_dinode_print(ip);
-	return -EIO;
-}
-
-/**
- * gfs2_inode_refresh - Refresh the incore copy of the dinode
- * @ip: The GFS2 inode
- *
- * Returns: errno
- */
-
-int gfs2_inode_refresh(struct gfs2_inode *ip)
-{
-	struct buffer_head *dibh;
-	int error;
-
-	error = gfs2_meta_inode_buffer(ip, &dibh);
-	if (error)
-		return error;
-
-	if (gfs2_metatype_check(GFS2_SB(&ip->i_inode), dibh, GFS2_METATYPE_DI)) {
-		brelse(dibh);
-		return -EIO;
-	}
-
-	error = gfs2_dinode_in(ip, dibh->b_data);
-	brelse(dibh);
-	clear_bit(GIF_INVALID, &ip->i_flags);
-
-	return error;
-}
-
-int gfs2_dinode_dealloc(struct gfs2_inode *ip)
-{
-	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
-	struct gfs2_alloc *al;
-	struct gfs2_rgrpd *rgd;
-	int error;
-
-	if (gfs2_get_inode_blocks(&ip->i_inode) != 1) {
-		if (gfs2_consist_inode(ip))
-			gfs2_dinode_print(ip);
-		return -EIO;
-	}
-
-	al = gfs2_alloc_get(ip);
-	if (!al)
-		return -ENOMEM;
-
-	error = gfs2_quota_hold(ip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
-	if (error)
-		goto out;
-
-	error = gfs2_rindex_hold(sdp, &al->al_ri_gh);
-	if (error)
-		goto out_qs;
-
-	rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
-	if (!rgd) {
-		gfs2_consist_inode(ip);
-		error = -EIO;
-		goto out_rindex_relse;
-	}
-
-	error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0,
-				   &al->al_rgd_gh);
-	if (error)
-		goto out_rindex_relse;
-
-	error = gfs2_trans_begin(sdp, RES_RG_BIT + RES_STATFS + RES_QUOTA, 1);
-	if (error)
-		goto out_rg_gunlock;
-
-	set_bit(GLF_DIRTY, &ip->i_gl->gl_flags);
-	set_bit(GLF_LFLUSH, &ip->i_gl->gl_flags);
-
-	gfs2_free_di(rgd, ip);
-
-	gfs2_trans_end(sdp);
-
-out_rg_gunlock:
-	gfs2_glock_dq_uninit(&al->al_rgd_gh);
-out_rindex_relse:
-	gfs2_glock_dq_uninit(&al->al_ri_gh);
-out_qs:
-	gfs2_quota_unhold(ip);
-out:
-	gfs2_alloc_put(ip);
-	return error;
-}
-
-/**
- * gfs2_change_nlink - Change nlink count on inode
- * @ip: The GFS2 inode
- * @diff: The change in the nlink count required
- *
- * Returns: errno
- */
-int gfs2_change_nlink(struct gfs2_inode *ip, int diff)
-{
-	struct buffer_head *dibh;
-	u32 nlink;
-	int error;
-
-	BUG_ON(diff != 1 && diff != -1);
-	nlink = ip->i_inode.i_nlink + diff;
-
-	/* If we are reducing the nlink count, but the new value ends up being
-	   bigger than the old one, we must have underflowed. */
-	if (diff < 0 && nlink > ip->i_inode.i_nlink) {
-		if (gfs2_consist_inode(ip))
-			gfs2_dinode_print(ip);
-		return -EIO;
-	}
-
-	error = gfs2_meta_inode_buffer(ip, &dibh);
-	if (error)
-		return error;
-
-	if (diff > 0)
-		inc_nlink(&ip->i_inode);
-	else
-		drop_nlink(&ip->i_inode);
-
-	ip->i_inode.i_ctime = CURRENT_TIME;
-
-	gfs2_trans_add_bh(ip->i_gl, dibh, 1);
-	gfs2_dinode_out(ip, dibh->b_data);
-	brelse(dibh);
-	mark_inode_dirty(&ip->i_inode);
-
-	if (ip->i_inode.i_nlink == 0)
-		gfs2_unlink_di(&ip->i_inode); /* mark inode unlinked */
-
-	return error;
-}
 
 struct inode *gfs2_lookup_simple(struct inode *dip, const char *name)
 {
@@ -517,7 +343,7 @@ static int create_ok(struct gfs2_inode *dip, const struct qstr *name,
 
 	/*  Don't create entries in an unlinked directory  */
 	if (!dip->i_inode.i_nlink)
-		return -EPERM;
+		return -ENOENT;
 
 	error = gfs2_dir_check(&dip->i_inode, name, NULL);
 	switch (error) {
@@ -587,21 +413,44 @@ out:
 	return error;
 }
 
+static void gfs2_init_dir(struct buffer_head *dibh,
+			  const struct gfs2_inode *parent)
+{
+	struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
+	struct gfs2_dirent *dent = (struct gfs2_dirent *)(di+1);
+
+	gfs2_qstr2dirent(&gfs2_qdot, GFS2_DIRENT_SIZE(gfs2_qdot.len), dent);
+	dent->de_inum = di->di_num; /* already GFS2 endian */
+	dent->de_type = cpu_to_be16(DT_DIR);
+
+	dent = (struct gfs2_dirent *)((char*)dent + GFS2_DIRENT_SIZE(1));
+	gfs2_qstr2dirent(&gfs2_qdotdot, dibh->b_size - GFS2_DIRENT_SIZE(1) - sizeof(struct gfs2_dinode), dent);
+	gfs2_inum_out(parent, dent);
+	dent->de_type = cpu_to_be16(DT_DIR);
+	
+}
+
 /**
  * init_dinode - Fill in a new dinode structure
- * @dip: the directory this inode is being created in
+ * @dip: The directory this inode is being created in
  * @gl: The glock covering the new inode
- * @inum: the inode number
- * @mode: the file permissions
- * @uid:
- * @gid:
+ * @inum: The inode number
+ * @mode: The file permissions
+ * @uid: The uid of the new inode
+ * @gid: The gid of the new inode
+ * @generation: The generation number of the new inode
+ * @dev: The device number (if a device node)
+ * @symname: The symlink destination (if a symlink)
+ * @size: The inode size (ignored for directories)
+ * @bhp: The buffer head (returned to caller)
  *
  */
 
 static void init_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
 			const struct gfs2_inum_host *inum, unsigned int mode,
 			unsigned int uid, unsigned int gid,
-			const u64 *generation, dev_t dev, struct buffer_head **bhp)
+			const u64 *generation, dev_t dev, const char *symname,
+			unsigned size, struct buffer_head **bhp)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
 	struct gfs2_dinode *di;
@@ -620,7 +469,7 @@ static void init_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
 	di->di_uid = cpu_to_be32(uid);
 	di->di_gid = cpu_to_be32(gid);
 	di->di_nlink = 0;
-	di->di_size = 0;
+	di->di_size = cpu_to_be64(size);
 	di->di_blocks = cpu_to_be64(1);
 	di->di_atime = di->di_mtime = di->di_ctime = cpu_to_be64(tv.tv_sec);
 	di->di_major = cpu_to_be32(MAJOR(dev));
@@ -628,16 +477,6 @@ static void init_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
 	di->di_goal_meta = di->di_goal_data = cpu_to_be64(inum->no_addr);
 	di->di_generation = cpu_to_be64(*generation);
 	di->di_flags = 0;
-
-	if (S_ISREG(mode)) {
-		if ((dip->i_diskflags & GFS2_DIF_INHERIT_JDATA) ||
-		    gfs2_tune_get(sdp, gt_new_files_jdata))
-			di->di_flags |= cpu_to_be32(GFS2_DIF_JDATA);
-	} else if (S_ISDIR(mode)) {
-		di->di_flags |= cpu_to_be32(dip->i_diskflags &
-					    GFS2_DIF_INHERIT_JDATA);
-	}
-
 	di->__pad1 = 0;
 	di->di_payload_format = cpu_to_be32(S_ISDIR(mode) ? GFS2_FORMAT_DE : 0);
 	di->di_height = 0;
@@ -651,7 +490,26 @@ static void init_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
 	di->di_mtime_nsec = cpu_to_be32(tv.tv_nsec);
 	di->di_ctime_nsec = cpu_to_be32(tv.tv_nsec);
 	memset(&di->di_reserved, 0, sizeof(di->di_reserved));
-	
+
+	switch(mode & S_IFMT) {	
+	case S_IFREG:
+		if ((dip->i_diskflags & GFS2_DIF_INHERIT_JDATA) ||
+		    gfs2_tune_get(sdp, gt_new_files_jdata))
+			di->di_flags |= cpu_to_be32(GFS2_DIF_JDATA);
+		break;
+	case S_IFDIR:
+		di->di_flags |= cpu_to_be32(dip->i_diskflags &
+					    GFS2_DIF_INHERIT_JDATA);
+		di->di_flags |= cpu_to_be32(GFS2_DIF_JDATA);
+		di->di_size = cpu_to_be64(sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode));
+		di->di_entries = cpu_to_be32(2);
+		gfs2_init_dir(dibh, dip);
+		break;
+	case S_IFLNK:
+		memcpy(dibh->b_data + sizeof(struct gfs2_dinode), symname, size);
+		break;
+	}
+
 	set_buffer_uptodate(dibh);
 
 	*bhp = dibh;
@@ -659,7 +517,8 @@ static void init_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
 
 static int make_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
 		       unsigned int mode, const struct gfs2_inum_host *inum,
-		       const u64 *generation, dev_t dev, struct buffer_head **bhp)
+		       const u64 *generation, dev_t dev, const char *symname,
+		       unsigned int size, struct buffer_head **bhp)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
 	unsigned int uid, gid;
@@ -681,7 +540,7 @@ static int make_dinode(struct gfs2_inode *dip, struct gfs2_glock *gl,
 	if (error)
 		goto out_quota;
 
-	init_dinode(dip, gl, inum, mode, uid, gid, generation, dev, bhp);
+	init_dinode(dip, gl, inum, mode, uid, gid, generation, dev, symname, size, bhp);
 	gfs2_quota_change(dip, +1, uid, gid);
 	gfs2_trans_end(sdp);
 
@@ -735,14 +594,16 @@ static int link_dinode(struct gfs2_inode *dip, const struct qstr *name,
 			goto fail_quota_locks;
 	}
 
-	error = gfs2_dir_add(&dip->i_inode, name, ip, IF2DT(ip->i_inode.i_mode));
+	error = gfs2_dir_add(&dip->i_inode, name, ip);
 	if (error)
 		goto fail_end_trans;
 
 	error = gfs2_meta_inode_buffer(ip, &dibh);
 	if (error)
 		goto fail_end_trans;
-	ip->i_inode.i_nlink = 1;
+	inc_nlink(&ip->i_inode);
+	if (S_ISDIR(ip->i_inode.i_mode))
+		inc_nlink(&ip->i_inode);
 	gfs2_trans_add_bh(ip->i_gl, dibh, 1);
 	gfs2_dinode_out(ip, dibh->b_data);
 	brelse(dibh);
@@ -789,27 +650,25 @@ static int gfs2_security_init(struct gfs2_inode *dip, struct gfs2_inode *ip,
 }
 
 /**
- * gfs2_createi - Create a new inode
- * @ghs: An array of two holders
- * @name: The name of the new file
- * @mode: the permissions on the new inode
+ * gfs2_create_inode - Create a new inode
+ * @dir: The parent directory
+ * @dentry: The new dentry
+ * @mode: The permissions on the new inode
+ * @dev: For device nodes, this is the device number
+ * @symname: For symlinks, this is the link destination
+ * @size: The initial size of the inode (ignored for directories)
  *
- * @ghs[0] is an initialized holder for the directory
- * @ghs[1] is the holder for the inode lock
- *
- * If the return value is not NULL, the glocks on both the directory and the new
- * file are held.  A transaction has been started and an inplace reservation
- * is held, as well.
- *
- * Returns: An inode
+ * Returns: 0 on success, or error code
  */
 
-struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
-			   unsigned int mode, dev_t dev)
+static int gfs2_create_inode(struct inode *dir, struct dentry *dentry,
+			     unsigned int mode, dev_t dev, const char *symname,
+			     unsigned int size)
 {
+	const struct qstr *name = &dentry->d_name;
+	struct gfs2_holder ghs[2];
 	struct inode *inode = NULL;
-	struct gfs2_inode *dip = ghs->gh_gl->gl_object;
-	struct inode *dir = &dip->i_inode;
+	struct gfs2_inode *dip = GFS2_I(dir);
 	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
 	struct gfs2_inum_host inum = { .no_addr = 0, .no_formal_ino = 0 };
 	int error;
@@ -817,10 +676,9 @@ struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
 	struct buffer_head *bh = NULL;
 
 	if (!name->len || name->len > GFS2_FNAMESIZE)
-		return ERR_PTR(-ENAMETOOLONG);
+		return -ENAMETOOLONG;
 
-	gfs2_holder_reinit(LM_ST_EXCLUSIVE, 0, ghs);
-	error = gfs2_glock_nq(ghs);
+	error = gfs2_glock_nq_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
 	if (error)
 		goto fail;
 
@@ -838,12 +696,12 @@ struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
 	if (error)
 		goto fail_gunlock;
 
-	error = make_dinode(dip, ghs[1].gh_gl, mode, &inum, &generation, dev, &bh);
+	error = make_dinode(dip, ghs[1].gh_gl, mode, &inum, &generation, dev, symname, size, &bh);
 	if (error)
 		goto fail_gunlock2;
 
 	inode = gfs2_inode_lookup(dir->i_sb, IF2DT(mode), inum.no_addr,
-				  inum.no_formal_ino);
+				  inum.no_formal_ino, 0);
 	if (IS_ERR(inode))
 		goto fail_gunlock2;
 
@@ -865,18 +723,852 @@ struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
 
 	if (bh)
 		brelse(bh);
-	return inode;
+
+	gfs2_trans_end(sdp);
+	if (dip->i_alloc->al_rgd)
+		gfs2_inplace_release(dip);
+	gfs2_quota_unlock(dip);
+	gfs2_alloc_put(dip);
+	gfs2_glock_dq_uninit_m(2, ghs);
+	mark_inode_dirty(inode);
+	d_instantiate(dentry, inode);
+	return 0;
 
 fail_gunlock2:
 	gfs2_glock_dq_uninit(ghs + 1);
 	if (inode && !IS_ERR(inode))
 		iput(inode);
 fail_gunlock:
-	gfs2_glock_dq(ghs);
+	gfs2_glock_dq_uninit(ghs);
 fail:
 	if (bh)
 		brelse(bh);
-	return ERR_PTR(error);
+	return error;
+}
+
+/**
+ * gfs2_create - Create a file
+ * @dir: The directory in which to create the file
+ * @dentry: The dentry of the new file
+ * @mode: The mode of the new file
+ *
+ * Returns: errno
+ */
+
+static int gfs2_create(struct inode *dir, struct dentry *dentry,
+		       int mode, struct nameidata *nd)
+{
+	struct inode *inode;
+	int ret;
+
+	for (;;) {
+		ret = gfs2_create_inode(dir, dentry, S_IFREG | mode, 0, NULL, 0);
+		if (ret != -EEXIST || (nd && (nd->flags & LOOKUP_EXCL)))
+			return ret;
+
+		inode = gfs2_lookupi(dir, &dentry->d_name, 0);
+		if (inode) {
+			if (!IS_ERR(inode))
+				break;
+			return PTR_ERR(inode);
+		}
+	}
+
+	d_instantiate(dentry, inode);
+	return 0;
+}
+
+/**
+ * gfs2_lookup - Look up a filename in a directory and return its inode
+ * @dir: The directory inode
+ * @dentry: The dentry of the new inode
+ * @nd: passed from Linux VFS, ignored by us
+ *
+ * Called by the VFS layer. Lock dir and call gfs2_lookupi()
+ *
+ * Returns: errno
+ */
+
+static struct dentry *gfs2_lookup(struct inode *dir, struct dentry *dentry,
+				  struct nameidata *nd)
+{
+	struct inode *inode = NULL;
+
+	inode = gfs2_lookupi(dir, &dentry->d_name, 0);
+	if (inode && IS_ERR(inode))
+		return ERR_CAST(inode);
+
+	if (inode) {
+		struct gfs2_glock *gl = GFS2_I(inode)->i_gl;
+		struct gfs2_holder gh;
+		int error;
+		error = gfs2_glock_nq_init(gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
+		if (error) {
+			iput(inode);
+			return ERR_PTR(error);
+		}
+		gfs2_glock_dq_uninit(&gh);
+		return d_splice_alias(inode, dentry);
+	}
+	d_add(dentry, inode);
+
+	return NULL;
+}
+
+/**
+ * gfs2_link - Link to a file
+ * @old_dentry: The inode to link
+ * @dir: Add link to this directory
+ * @dentry: The name of the link
+ *
+ * Link the inode in "old_dentry" into the directory "dir" with the
+ * name in "dentry".
+ *
+ * Returns: errno
+ */
+
+static int gfs2_link(struct dentry *old_dentry, struct inode *dir,
+		     struct dentry *dentry)
+{
+	struct gfs2_inode *dip = GFS2_I(dir);
+	struct gfs2_sbd *sdp = GFS2_SB(dir);
+	struct inode *inode = old_dentry->d_inode;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_holder ghs[2];
+	struct buffer_head *dibh;
+	int alloc_required;
+	int error;
+
+	if (S_ISDIR(inode->i_mode))
+		return -EPERM;
+
+	gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
+	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
+
+	error = gfs2_glock_nq(ghs); /* parent */
+	if (error)
+		goto out_parent;
+
+	error = gfs2_glock_nq(ghs + 1); /* child */
+	if (error)
+		goto out_child;
+
+	error = -ENOENT;
+	if (inode->i_nlink == 0)
+		goto out_gunlock;
+
+	error = gfs2_permission(dir, MAY_WRITE | MAY_EXEC, 0);
+	if (error)
+		goto out_gunlock;
+
+	error = gfs2_dir_check(dir, &dentry->d_name, NULL);
+	switch (error) {
+	case -ENOENT:
+		break;
+	case 0:
+		error = -EEXIST;
+	default:
+		goto out_gunlock;
+	}
+
+	error = -EINVAL;
+	if (!dip->i_inode.i_nlink)
+		goto out_gunlock;
+	error = -EFBIG;
+	if (dip->i_entries == (u32)-1)
+		goto out_gunlock;
+	error = -EPERM;
+	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+		goto out_gunlock;
+	error = -EINVAL;
+	if (!ip->i_inode.i_nlink)
+		goto out_gunlock;
+	error = -EMLINK;
+	if (ip->i_inode.i_nlink == (u32)-1)
+		goto out_gunlock;
+
+	alloc_required = error = gfs2_diradd_alloc_required(dir, &dentry->d_name);
+	if (error < 0)
+		goto out_gunlock;
+	error = 0;
+
+	if (alloc_required) {
+		struct gfs2_alloc *al = gfs2_alloc_get(dip);
+		if (!al) {
+			error = -ENOMEM;
+			goto out_gunlock;
+		}
+
+		error = gfs2_quota_lock_check(dip);
+		if (error)
+			goto out_alloc;
+
+		al->al_requested = sdp->sd_max_dirres;
+
+		error = gfs2_inplace_reserve(dip);
+		if (error)
+			goto out_gunlock_q;
+
+		error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
+					 gfs2_rg_blocks(al) +
+					 2 * RES_DINODE + RES_STATFS +
+					 RES_QUOTA, 0);
+		if (error)
+			goto out_ipres;
+	} else {
+		error = gfs2_trans_begin(sdp, 2 * RES_DINODE + RES_LEAF, 0);
+		if (error)
+			goto out_ipres;
+	}
+
+	error = gfs2_meta_inode_buffer(ip, &dibh);
+	if (error)
+		goto out_end_trans;
+
+	error = gfs2_dir_add(dir, &dentry->d_name, ip);
+	if (error)
+		goto out_brelse;
+
+	gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+	inc_nlink(&ip->i_inode);
+	ip->i_inode.i_ctime = CURRENT_TIME;
+	gfs2_dinode_out(ip, dibh->b_data);
+	mark_inode_dirty(&ip->i_inode);
+
+out_brelse:
+	brelse(dibh);
+out_end_trans:
+	gfs2_trans_end(sdp);
+out_ipres:
+	if (alloc_required)
+		gfs2_inplace_release(dip);
+out_gunlock_q:
+	if (alloc_required)
+		gfs2_quota_unlock(dip);
+out_alloc:
+	if (alloc_required)
+		gfs2_alloc_put(dip);
+out_gunlock:
+	gfs2_glock_dq(ghs + 1);
+out_child:
+	gfs2_glock_dq(ghs);
+out_parent:
+	gfs2_holder_uninit(ghs);
+	gfs2_holder_uninit(ghs + 1);
+	if (!error) {
+		ihold(inode);
+		d_instantiate(dentry, inode);
+		mark_inode_dirty(inode);
+	}
+	return error;
+}
+
+/*
+ * gfs2_unlink_ok - check to see that a inode is still in a directory
+ * @dip: the directory
+ * @name: the name of the file
+ * @ip: the inode
+ *
+ * Assumes that the lock on (at least) @dip is held.
+ *
+ * Returns: 0 if the parent/child relationship is correct, errno if it isn't
+ */
+
+static int gfs2_unlink_ok(struct gfs2_inode *dip, const struct qstr *name,
+			  const struct gfs2_inode *ip)
+{
+	int error;
+
+	if (IS_IMMUTABLE(&ip->i_inode) || IS_APPEND(&ip->i_inode))
+		return -EPERM;
+
+	if ((dip->i_inode.i_mode & S_ISVTX) &&
+	    dip->i_inode.i_uid != current_fsuid() &&
+	    ip->i_inode.i_uid != current_fsuid() && !capable(CAP_FOWNER))
+		return -EPERM;
+
+	if (IS_APPEND(&dip->i_inode))
+		return -EPERM;
+
+	error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC, 0);
+	if (error)
+		return error;
+
+	error = gfs2_dir_check(&dip->i_inode, name, ip);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+/**
+ * gfs2_unlink_inode - Removes an inode from its parent dir and unlinks it
+ * @dip: The parent directory
+ * @name: The name of the entry in the parent directory
+ * @bh: The inode buffer for the inode to be removed
+ * @inode: The inode to be removed
+ *
+ * Called with all the locks and in a transaction. This will only be
+ * called for a directory after it has been checked to ensure it is empty.
+ *
+ * Returns: 0 on success, or an error
+ */
+
+static int gfs2_unlink_inode(struct gfs2_inode *dip,
+			     const struct dentry *dentry,
+			     struct buffer_head *bh)
+{
+	struct inode *inode = dentry->d_inode;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	int error;
+
+	error = gfs2_dir_del(dip, dentry);
+	if (error)
+		return error;
+
+	ip->i_entries = 0;
+	inode->i_ctime = CURRENT_TIME;
+	if (S_ISDIR(inode->i_mode))
+		clear_nlink(inode);
+	else
+		drop_nlink(inode);
+	gfs2_trans_add_bh(ip->i_gl, bh, 1);
+	gfs2_dinode_out(ip, bh->b_data);
+	mark_inode_dirty(inode);
+	if (inode->i_nlink == 0)
+		gfs2_unlink_di(inode);
+	return 0;
+}
+
+
+/**
+ * gfs2_unlink - Unlink an inode (this does rmdir as well)
+ * @dir: The inode of the directory containing the inode to unlink
+ * @dentry: The file itself
+ *
+ * This routine uses the type of the inode as a flag to figure out
+ * whether this is an unlink or an rmdir.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_unlink(struct inode *dir, struct dentry *dentry)
+{
+	struct gfs2_inode *dip = GFS2_I(dir);
+	struct gfs2_sbd *sdp = GFS2_SB(dir);
+	struct inode *inode = dentry->d_inode;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct buffer_head *bh;
+	struct gfs2_holder ghs[3];
+	struct gfs2_rgrpd *rgd;
+	struct gfs2_holder ri_gh;
+	int error;
+
+	error = gfs2_rindex_hold(sdp, &ri_gh);
+	if (error)
+		return error;
+
+	gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
+	gfs2_holder_init(ip->i_gl,  LM_ST_EXCLUSIVE, 0, ghs + 1);
+
+	rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
+	gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
+
+
+	error = gfs2_glock_nq(ghs); /* parent */
+	if (error)
+		goto out_parent;
+
+	error = gfs2_glock_nq(ghs + 1); /* child */
+	if (error)
+		goto out_child;
+
+	error = -ENOENT;
+	if (inode->i_nlink == 0)
+		goto out_rgrp;
+
+	if (S_ISDIR(inode->i_mode)) {
+		error = -ENOTEMPTY;
+		if (ip->i_entries > 2 || inode->i_nlink > 2)
+			goto out_rgrp;
+	}
+
+	error = gfs2_glock_nq(ghs + 2); /* rgrp */
+	if (error)
+		goto out_rgrp;
+
+	error = gfs2_unlink_ok(dip, &dentry->d_name, ip);
+	if (error)
+		goto out_gunlock;
+
+	error = gfs2_trans_begin(sdp, 2*RES_DINODE + 3*RES_LEAF + RES_RG_BIT, 0);
+	if (error)
+		goto out_gunlock;
+
+	error = gfs2_meta_inode_buffer(ip, &bh);
+	if (error)
+		goto out_end_trans;
+
+	error = gfs2_unlink_inode(dip, dentry, bh);
+	brelse(bh);
+
+out_end_trans:
+	gfs2_trans_end(sdp);
+out_gunlock:
+	gfs2_glock_dq(ghs + 2);
+out_rgrp:
+	gfs2_holder_uninit(ghs + 2);
+	gfs2_glock_dq(ghs + 1);
+out_child:
+	gfs2_holder_uninit(ghs + 1);
+	gfs2_glock_dq(ghs);
+out_parent:
+	gfs2_holder_uninit(ghs);
+	gfs2_glock_dq_uninit(&ri_gh);
+	return error;
+}
+
+/**
+ * gfs2_symlink - Create a symlink
+ * @dir: The directory to create the symlink in
+ * @dentry: The dentry to put the symlink in
+ * @symname: The thing which the link points to
+ *
+ * Returns: errno
+ */
+
+static int gfs2_symlink(struct inode *dir, struct dentry *dentry,
+			const char *symname)
+{
+	struct gfs2_sbd *sdp = GFS2_SB(dir);
+	unsigned int size;
+
+	size = strlen(symname);
+	if (size > sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode) - 1)
+		return -ENAMETOOLONG;
+
+	return gfs2_create_inode(dir, dentry, S_IFLNK | S_IRWXUGO, 0, symname, size);
+}
+
+/**
+ * gfs2_mkdir - Make a directory
+ * @dir: The parent directory of the new one
+ * @dentry: The dentry of the new directory
+ * @mode: The mode of the new directory
+ *
+ * Returns: errno
+ */
+
+static int gfs2_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+{
+	return gfs2_create_inode(dir, dentry, S_IFDIR | mode, 0, NULL, 0);
+}
+
+/**
+ * gfs2_mknod - Make a special file
+ * @dir: The directory in which the special file will reside
+ * @dentry: The dentry of the special file
+ * @mode: The mode of the special file
+ * @dev: The device specification of the special file
+ *
+ */
+
+static int gfs2_mknod(struct inode *dir, struct dentry *dentry, int mode,
+		      dev_t dev)
+{
+	return gfs2_create_inode(dir, dentry, mode, dev, NULL, 0);
+}
+
+/*
+ * gfs2_ok_to_move - check if it's ok to move a directory to another directory
+ * @this: move this
+ * @to: to here
+ *
+ * Follow @to back to the root and make sure we don't encounter @this
+ * Assumes we already hold the rename lock.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_ok_to_move(struct gfs2_inode *this, struct gfs2_inode *to)
+{
+	struct inode *dir = &to->i_inode;
+	struct super_block *sb = dir->i_sb;
+	struct inode *tmp;
+	int error = 0;
+
+	igrab(dir);
+
+	for (;;) {
+		if (dir == &this->i_inode) {
+			error = -EINVAL;
+			break;
+		}
+		if (dir == sb->s_root->d_inode) {
+			error = 0;
+			break;
+		}
+
+		tmp = gfs2_lookupi(dir, &gfs2_qdotdot, 1);
+		if (IS_ERR(tmp)) {
+			error = PTR_ERR(tmp);
+			break;
+		}
+
+		iput(dir);
+		dir = tmp;
+	}
+
+	iput(dir);
+
+	return error;
+}
+
+/**
+ * gfs2_rename - Rename a file
+ * @odir: Parent directory of old file name
+ * @odentry: The old dentry of the file
+ * @ndir: Parent directory of new file name
+ * @ndentry: The new dentry of the file
+ *
+ * Returns: errno
+ */
+
+static int gfs2_rename(struct inode *odir, struct dentry *odentry,
+		       struct inode *ndir, struct dentry *ndentry)
+{
+	struct gfs2_inode *odip = GFS2_I(odir);
+	struct gfs2_inode *ndip = GFS2_I(ndir);
+	struct gfs2_inode *ip = GFS2_I(odentry->d_inode);
+	struct gfs2_inode *nip = NULL;
+	struct gfs2_sbd *sdp = GFS2_SB(odir);
+	struct gfs2_holder ghs[5], r_gh = { .gh_gl = NULL, }, ri_gh;
+	struct gfs2_rgrpd *nrgd;
+	unsigned int num_gh;
+	int dir_rename = 0;
+	int alloc_required = 0;
+	unsigned int x;
+	int error;
+
+	if (ndentry->d_inode) {
+		nip = GFS2_I(ndentry->d_inode);
+		if (ip == nip)
+			return 0;
+	}
+
+	error = gfs2_rindex_hold(sdp, &ri_gh);
+	if (error)
+		return error;
+
+	if (odip != ndip) {
+		error = gfs2_glock_nq_init(sdp->sd_rename_gl, LM_ST_EXCLUSIVE,
+					   0, &r_gh);
+		if (error)
+			goto out;
+
+		if (S_ISDIR(ip->i_inode.i_mode)) {
+			dir_rename = 1;
+			/* don't move a dirctory into it's subdir */
+			error = gfs2_ok_to_move(ip, ndip);
+			if (error)
+				goto out_gunlock_r;
+		}
+	}
+
+	num_gh = 1;
+	gfs2_holder_init(odip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
+	if (odip != ndip) {
+		gfs2_holder_init(ndip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
+		num_gh++;
+	}
+	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
+	num_gh++;
+
+	if (nip) {
+		gfs2_holder_init(nip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
+		num_gh++;
+		/* grab the resource lock for unlink flag twiddling 
+		 * this is the case of the target file already existing
+		 * so we unlink before doing the rename
+		 */
+		nrgd = gfs2_blk2rgrpd(sdp, nip->i_no_addr);
+		if (nrgd)
+			gfs2_holder_init(nrgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh++);
+	}
+
+	for (x = 0; x < num_gh; x++) {
+		error = gfs2_glock_nq(ghs + x);
+		if (error)
+			goto out_gunlock;
+	}
+
+	error = -ENOENT;
+	if (ip->i_inode.i_nlink == 0)
+		goto out_gunlock;
+
+	/* Check out the old directory */
+
+	error = gfs2_unlink_ok(odip, &odentry->d_name, ip);
+	if (error)
+		goto out_gunlock;
+
+	/* Check out the new directory */
+
+	if (nip) {
+		error = gfs2_unlink_ok(ndip, &ndentry->d_name, nip);
+		if (error)
+			goto out_gunlock;
+
+		if (nip->i_inode.i_nlink == 0) {
+			error = -EAGAIN;
+			goto out_gunlock;
+		}
+
+		if (S_ISDIR(nip->i_inode.i_mode)) {
+			if (nip->i_entries < 2) {
+				gfs2_consist_inode(nip);
+				error = -EIO;
+				goto out_gunlock;
+			}
+			if (nip->i_entries > 2) {
+				error = -ENOTEMPTY;
+				goto out_gunlock;
+			}
+		}
+	} else {
+		error = gfs2_permission(ndir, MAY_WRITE | MAY_EXEC, 0);
+		if (error)
+			goto out_gunlock;
+
+		error = gfs2_dir_check(ndir, &ndentry->d_name, NULL);
+		switch (error) {
+		case -ENOENT:
+			error = 0;
+			break;
+		case 0:
+			error = -EEXIST;
+		default:
+			goto out_gunlock;
+		};
+
+		if (odip != ndip) {
+			if (!ndip->i_inode.i_nlink) {
+				error = -ENOENT;
+				goto out_gunlock;
+			}
+			if (ndip->i_entries == (u32)-1) {
+				error = -EFBIG;
+				goto out_gunlock;
+			}
+			if (S_ISDIR(ip->i_inode.i_mode) &&
+			    ndip->i_inode.i_nlink == (u32)-1) {
+				error = -EMLINK;
+				goto out_gunlock;
+			}
+		}
+	}
+
+	/* Check out the dir to be renamed */
+
+	if (dir_rename) {
+		error = gfs2_permission(odentry->d_inode, MAY_WRITE, 0);
+		if (error)
+			goto out_gunlock;
+	}
+
+	if (nip == NULL)
+		alloc_required = gfs2_diradd_alloc_required(ndir, &ndentry->d_name);
+	error = alloc_required;
+	if (error < 0)
+		goto out_gunlock;
+	error = 0;
+
+	if (alloc_required) {
+		struct gfs2_alloc *al = gfs2_alloc_get(ndip);
+		if (!al) {
+			error = -ENOMEM;
+			goto out_gunlock;
+		}
+
+		error = gfs2_quota_lock_check(ndip);
+		if (error)
+			goto out_alloc;
+
+		al->al_requested = sdp->sd_max_dirres;
+
+		error = gfs2_inplace_reserve_ri(ndip);
+		if (error)
+			goto out_gunlock_q;
+
+		error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
+					 gfs2_rg_blocks(al) +
+					 4 * RES_DINODE + 4 * RES_LEAF +
+					 RES_STATFS + RES_QUOTA + 4, 0);
+		if (error)
+			goto out_ipreserv;
+	} else {
+		error = gfs2_trans_begin(sdp, 4 * RES_DINODE +
+					 5 * RES_LEAF + 4, 0);
+		if (error)
+			goto out_gunlock;
+	}
+
+	/* Remove the target file, if it exists */
+
+	if (nip) {
+		struct buffer_head *bh;
+		error = gfs2_meta_inode_buffer(nip, &bh);
+		if (error)
+			goto out_end_trans;
+		error = gfs2_unlink_inode(ndip, ndentry, bh);
+		brelse(bh);
+	}
+
+	if (dir_rename) {
+		error = gfs2_dir_mvino(ip, &gfs2_qdotdot, ndip, DT_DIR);
+		if (error)
+			goto out_end_trans;
+	} else {
+		struct buffer_head *dibh;
+		error = gfs2_meta_inode_buffer(ip, &dibh);
+		if (error)
+			goto out_end_trans;
+		ip->i_inode.i_ctime = CURRENT_TIME;
+		gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+		gfs2_dinode_out(ip, dibh->b_data);
+		brelse(dibh);
+	}
+
+	error = gfs2_dir_del(odip, odentry);
+	if (error)
+		goto out_end_trans;
+
+	error = gfs2_dir_add(ndir, &ndentry->d_name, ip);
+	if (error)
+		goto out_end_trans;
+
+out_end_trans:
+	gfs2_trans_end(sdp);
+out_ipreserv:
+	if (alloc_required)
+		gfs2_inplace_release(ndip);
+out_gunlock_q:
+	if (alloc_required)
+		gfs2_quota_unlock(ndip);
+out_alloc:
+	if (alloc_required)
+		gfs2_alloc_put(ndip);
+out_gunlock:
+	while (x--) {
+		gfs2_glock_dq(ghs + x);
+		gfs2_holder_uninit(ghs + x);
+	}
+out_gunlock_r:
+	if (r_gh.gh_gl)
+		gfs2_glock_dq_uninit(&r_gh);
+out:
+	gfs2_glock_dq_uninit(&ri_gh);
+	return error;
+}
+
+/**
+ * gfs2_follow_link - Follow a symbolic link
+ * @dentry: The dentry of the link
+ * @nd: Data that we pass to vfs_follow_link()
+ *
+ * This can handle symlinks of any size.
+ *
+ * Returns: 0 on success or error code
+ */
+
+static void *gfs2_follow_link(struct dentry *dentry, struct nameidata *nd)
+{
+	struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
+	struct gfs2_holder i_gh;
+	struct buffer_head *dibh;
+	unsigned int size;
+	char *buf;
+	int error;
+
+	gfs2_holder_init(ip->i_gl, LM_ST_SHARED, 0, &i_gh);
+	error = gfs2_glock_nq(&i_gh);
+	if (error) {
+		gfs2_holder_uninit(&i_gh);
+		nd_set_link(nd, ERR_PTR(error));
+		return NULL;
+	}
+
+	size = (unsigned int)i_size_read(&ip->i_inode);
+	if (size == 0) {
+		gfs2_consist_inode(ip);
+		buf = ERR_PTR(-EIO);
+		goto out;
+	}
+
+	error = gfs2_meta_inode_buffer(ip, &dibh);
+	if (error) {
+		buf = ERR_PTR(error);
+		goto out;
+	}
+
+	buf = kzalloc(size + 1, GFP_NOFS);
+	if (!buf)
+		buf = ERR_PTR(-ENOMEM);
+	else
+		memcpy(buf, dibh->b_data + sizeof(struct gfs2_dinode), size);
+	brelse(dibh);
+out:
+	gfs2_glock_dq_uninit(&i_gh);
+	nd_set_link(nd, buf);
+	return NULL;
+}
+
+static void gfs2_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
+{
+	char *s = nd_get_link(nd);
+	if (!IS_ERR(s))
+		kfree(s);
+}
+
+/**
+ * gfs2_permission -
+ * @inode: The inode
+ * @mask: The mask to be tested
+ * @flags: Indicates whether this is an RCU path walk or not
+ *
+ * This may be called from the VFS directly, or from within GFS2 with the
+ * inode locked, so we look to see if the glock is already locked and only
+ * lock the glock if its not already been done.
+ *
+ * Returns: errno
+ */
+
+int gfs2_permission(struct inode *inode, int mask, unsigned int flags)
+{
+	struct gfs2_inode *ip;
+	struct gfs2_holder i_gh;
+	int error;
+	int unlock = 0;
+
+
+	ip = GFS2_I(inode);
+	if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
+		if (flags & IPERM_FLAG_RCU)
+			return -ECHILD;
+		error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
+		if (error)
+			return error;
+		unlock = 1;
+	}
+
+	if ((mask & MAY_WRITE) && IS_IMMUTABLE(inode))
+		error = -EACCES;
+	else
+		error = generic_permission(inode, mask, flags, gfs2_check_acl);
+	if (unlock)
+		gfs2_glock_dq_uninit(&i_gh);
+
+	return error;
 }
 
 static int __gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
@@ -902,8 +1594,6 @@ static int __gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
  * @ip:
  * @attr:
  *
- * Called with a reference on the vnode.
- *
  * Returns: errno
  */
 
@@ -923,60 +1613,280 @@ int gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
 	return error;
 }
 
-void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf)
-{
-	struct gfs2_dinode *str = buf;
-
-	str->di_header.mh_magic = cpu_to_be32(GFS2_MAGIC);
-	str->di_header.mh_type = cpu_to_be32(GFS2_METATYPE_DI);
-	str->di_header.mh_format = cpu_to_be32(GFS2_FORMAT_DI);
-	str->di_num.no_addr = cpu_to_be64(ip->i_no_addr);
-	str->di_num.no_formal_ino = cpu_to_be64(ip->i_no_formal_ino);
-	str->di_mode = cpu_to_be32(ip->i_inode.i_mode);
-	str->di_uid = cpu_to_be32(ip->i_inode.i_uid);
-	str->di_gid = cpu_to_be32(ip->i_inode.i_gid);
-	str->di_nlink = cpu_to_be32(ip->i_inode.i_nlink);
-	str->di_size = cpu_to_be64(i_size_read(&ip->i_inode));
-	str->di_blocks = cpu_to_be64(gfs2_get_inode_blocks(&ip->i_inode));
-	str->di_atime = cpu_to_be64(ip->i_inode.i_atime.tv_sec);
-	str->di_mtime = cpu_to_be64(ip->i_inode.i_mtime.tv_sec);
-	str->di_ctime = cpu_to_be64(ip->i_inode.i_ctime.tv_sec);
-
-	str->di_goal_meta = cpu_to_be64(ip->i_goal);
-	str->di_goal_data = cpu_to_be64(ip->i_goal);
-	str->di_generation = cpu_to_be64(ip->i_generation);
-
-	str->di_flags = cpu_to_be32(ip->i_diskflags);
-	str->di_height = cpu_to_be16(ip->i_height);
-	str->di_payload_format = cpu_to_be32(S_ISDIR(ip->i_inode.i_mode) &&
-					     !(ip->i_diskflags & GFS2_DIF_EXHASH) ?
-					     GFS2_FORMAT_DE : 0);
-	str->di_depth = cpu_to_be16(ip->i_depth);
-	str->di_entries = cpu_to_be32(ip->i_entries);
-
-	str->di_eattr = cpu_to_be64(ip->i_eattr);
-	str->di_atime_nsec = cpu_to_be32(ip->i_inode.i_atime.tv_nsec);
-	str->di_mtime_nsec = cpu_to_be32(ip->i_inode.i_mtime.tv_nsec);
-	str->di_ctime_nsec = cpu_to_be32(ip->i_inode.i_ctime.tv_nsec);
-}
-
-void gfs2_dinode_print(const struct gfs2_inode *ip)
-{
-	printk(KERN_INFO "  no_formal_ino = %llu\n",
-	       (unsigned long long)ip->i_no_formal_ino);
-	printk(KERN_INFO "  no_addr = %llu\n",
-	       (unsigned long long)ip->i_no_addr);
-	printk(KERN_INFO "  i_size = %llu\n",
-	       (unsigned long long)i_size_read(&ip->i_inode));
-	printk(KERN_INFO "  blocks = %llu\n",
-	       (unsigned long long)gfs2_get_inode_blocks(&ip->i_inode));
-	printk(KERN_INFO "  i_goal = %llu\n",
-	       (unsigned long long)ip->i_goal);
-	printk(KERN_INFO "  i_diskflags = 0x%.8X\n", ip->i_diskflags);
-	printk(KERN_INFO "  i_height = %u\n", ip->i_height);
-	printk(KERN_INFO "  i_depth = %u\n", ip->i_depth);
-	printk(KERN_INFO "  i_entries = %u\n", ip->i_entries);
-	printk(KERN_INFO "  i_eattr = %llu\n",
-	       (unsigned long long)ip->i_eattr);
+static int setattr_chown(struct inode *inode, struct iattr *attr)
+{
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	u32 ouid, ogid, nuid, ngid;
+	int error;
+
+	ouid = inode->i_uid;
+	ogid = inode->i_gid;
+	nuid = attr->ia_uid;
+	ngid = attr->ia_gid;
+
+	if (!(attr->ia_valid & ATTR_UID) || ouid == nuid)
+		ouid = nuid = NO_QUOTA_CHANGE;
+	if (!(attr->ia_valid & ATTR_GID) || ogid == ngid)
+		ogid = ngid = NO_QUOTA_CHANGE;
+
+	if (!gfs2_alloc_get(ip))
+		return -ENOMEM;
+
+	error = gfs2_quota_lock(ip, nuid, ngid);
+	if (error)
+		goto out_alloc;
+
+	if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
+		error = gfs2_quota_check(ip, nuid, ngid);
+		if (error)
+			goto out_gunlock_q;
+	}
+
+	error = gfs2_trans_begin(sdp, RES_DINODE + 2 * RES_QUOTA, 0);
+	if (error)
+		goto out_gunlock_q;
+
+	error = gfs2_setattr_simple(ip, attr);
+	if (error)
+		goto out_end_trans;
+
+	if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
+		u64 blocks = gfs2_get_inode_blocks(&ip->i_inode);
+		gfs2_quota_change(ip, -blocks, ouid, ogid);
+		gfs2_quota_change(ip, blocks, nuid, ngid);
+	}
+
+out_end_trans:
+	gfs2_trans_end(sdp);
+out_gunlock_q:
+	gfs2_quota_unlock(ip);
+out_alloc:
+	gfs2_alloc_put(ip);
+	return error;
 }
 
+/**
+ * gfs2_setattr - Change attributes on an inode
+ * @dentry: The dentry which is changing
+ * @attr: The structure describing the change
+ *
+ * The VFS layer wants to change one or more of an inodes attributes.  Write
+ * that change out to disk.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_setattr(struct dentry *dentry, struct iattr *attr)
+{
+	struct inode *inode = dentry->d_inode;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_holder i_gh;
+	int error;
+
+	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &i_gh);
+	if (error)
+		return error;
+
+	error = -EPERM;
+	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+		goto out;
+
+	error = inode_change_ok(inode, attr);
+	if (error)
+		goto out;
+
+	if (attr->ia_valid & ATTR_SIZE)
+		error = gfs2_setattr_size(inode, attr->ia_size);
+	else if (attr->ia_valid & (ATTR_UID | ATTR_GID))
+		error = setattr_chown(inode, attr);
+	else if ((attr->ia_valid & ATTR_MODE) && IS_POSIXACL(inode))
+		error = gfs2_acl_chmod(ip, attr);
+	else
+		error = gfs2_setattr_simple(ip, attr);
+
+out:
+	gfs2_glock_dq_uninit(&i_gh);
+	if (!error)
+		mark_inode_dirty(inode);
+	return error;
+}
+
+/**
+ * gfs2_getattr - Read out an inode's attributes
+ * @mnt: The vfsmount the inode is being accessed from
+ * @dentry: The dentry to stat
+ * @stat: The inode's stats
+ *
+ * This may be called from the VFS directly, or from within GFS2 with the
+ * inode locked, so we look to see if the glock is already locked and only
+ * lock the glock if its not already been done. Note that its the NFS
+ * readdirplus operation which causes this to be called (from filldir)
+ * with the glock already held.
+ *
+ * Returns: errno
+ */
+
+static int gfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
+			struct kstat *stat)
+{
+	struct inode *inode = dentry->d_inode;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_holder gh;
+	int error;
+	int unlock = 0;
+
+	if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
+		error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
+		if (error)
+			return error;
+		unlock = 1;
+	}
+
+	generic_fillattr(inode, stat);
+	if (unlock)
+		gfs2_glock_dq_uninit(&gh);
+
+	return 0;
+}
+
+static int gfs2_setxattr(struct dentry *dentry, const char *name,
+			 const void *data, size_t size, int flags)
+{
+	struct inode *inode = dentry->d_inode;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_holder gh;
+	int ret;
+
+	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+	ret = gfs2_glock_nq(&gh);
+	if (ret == 0) {
+		ret = generic_setxattr(dentry, name, data, size, flags);
+		gfs2_glock_dq(&gh);
+	}
+	gfs2_holder_uninit(&gh);
+	return ret;
+}
+
+static ssize_t gfs2_getxattr(struct dentry *dentry, const char *name,
+			     void *data, size_t size)
+{
+	struct inode *inode = dentry->d_inode;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_holder gh;
+	int ret;
+
+	gfs2_holder_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
+	ret = gfs2_glock_nq(&gh);
+	if (ret == 0) {
+		ret = generic_getxattr(dentry, name, data, size);
+		gfs2_glock_dq(&gh);
+	}
+	gfs2_holder_uninit(&gh);
+	return ret;
+}
+
+static int gfs2_removexattr(struct dentry *dentry, const char *name)
+{
+	struct inode *inode = dentry->d_inode;
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_holder gh;
+	int ret;
+
+	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+	ret = gfs2_glock_nq(&gh);
+	if (ret == 0) {
+		ret = generic_removexattr(dentry, name);
+		gfs2_glock_dq(&gh);
+	}
+	gfs2_holder_uninit(&gh);
+	return ret;
+}
+
+static int gfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
+		       u64 start, u64 len)
+{
+	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_holder gh;
+	int ret;
+
+	ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC);
+	if (ret)
+		return ret;
+
+	mutex_lock(&inode->i_mutex);
+
+	ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, 0, &gh);
+	if (ret)
+		goto out;
+
+	if (gfs2_is_stuffed(ip)) {
+		u64 phys = ip->i_no_addr << inode->i_blkbits;
+		u64 size = i_size_read(inode);
+		u32 flags = FIEMAP_EXTENT_LAST|FIEMAP_EXTENT_NOT_ALIGNED|
+			    FIEMAP_EXTENT_DATA_INLINE;
+		phys += sizeof(struct gfs2_dinode);
+		phys += start;
+		if (start + len > size)
+			len = size - start;
+		if (start < size)
+			ret = fiemap_fill_next_extent(fieinfo, start, phys,
+						      len, flags);
+		if (ret == 1)
+			ret = 0;
+	} else {
+		ret = __generic_block_fiemap(inode, fieinfo, start, len,
+					     gfs2_block_map);
+	}
+
+	gfs2_glock_dq_uninit(&gh);
+out:
+	mutex_unlock(&inode->i_mutex);
+	return ret;
+}
+
+const struct inode_operations gfs2_file_iops = {
+	.permission = gfs2_permission,
+	.setattr = gfs2_setattr,
+	.getattr = gfs2_getattr,
+	.setxattr = gfs2_setxattr,
+	.getxattr = gfs2_getxattr,
+	.listxattr = gfs2_listxattr,
+	.removexattr = gfs2_removexattr,
+	.fiemap = gfs2_fiemap,
+};
+
+const struct inode_operations gfs2_dir_iops = {
+	.create = gfs2_create,
+	.lookup = gfs2_lookup,
+	.link = gfs2_link,
+	.unlink = gfs2_unlink,
+	.symlink = gfs2_symlink,
+	.mkdir = gfs2_mkdir,
+	.rmdir = gfs2_unlink,
+	.mknod = gfs2_mknod,
+	.rename = gfs2_rename,
+	.permission = gfs2_permission,
+	.setattr = gfs2_setattr,
+	.getattr = gfs2_getattr,
+	.setxattr = gfs2_setxattr,
+	.getxattr = gfs2_getxattr,
+	.listxattr = gfs2_listxattr,
+	.removexattr = gfs2_removexattr,
+	.fiemap = gfs2_fiemap,
+};
+
+const struct inode_operations gfs2_symlink_iops = {
+	.readlink = generic_readlink,
+	.follow_link = gfs2_follow_link,
+	.put_link = gfs2_put_link,
+	.permission = gfs2_permission,
+	.setattr = gfs2_setattr,
+	.getattr = gfs2_getattr,
+	.setxattr = gfs2_setxattr,
+	.getxattr = gfs2_getxattr,
+	.listxattr = gfs2_listxattr,
+	.removexattr = gfs2_removexattr,
+	.fiemap = gfs2_fiemap,
+};
+
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index 3e00a66e7cb..31606076f70 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -97,26 +97,21 @@ err:
 }
 
 extern struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned type, 
-				       u64 no_addr, u64 no_formal_ino);
+				       u64 no_addr, u64 no_formal_ino,
+				       int non_block);
 extern struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
 					 u64 *no_formal_ino,
 					 unsigned int blktype);
-extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr);
+extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr, int nonblock);
 
 extern int gfs2_inode_refresh(struct gfs2_inode *ip);
 
-extern int gfs2_dinode_dealloc(struct gfs2_inode *inode);
-extern int gfs2_change_nlink(struct gfs2_inode *ip, int diff);
 extern struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
 				  int is_root);
-extern struct inode *gfs2_createi(struct gfs2_holder *ghs,
-				  const struct qstr *name,
-				  unsigned int mode, dev_t dev);
 extern int gfs2_permission(struct inode *inode, int mask, unsigned int flags);
 extern int gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr);
 extern struct inode *gfs2_lookup_simple(struct inode *dip, const char *name);
 extern void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf);
-extern void gfs2_dinode_print(const struct gfs2_inode *ip);
 
 extern const struct inode_operations gfs2_file_iops;
 extern const struct inode_operations gfs2_dir_iops;
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 5b102c1887f..cec26c00b50 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -18,6 +18,7 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 #include <linux/bio.h>
+#include <linux/writeback.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -83,55 +84,97 @@ void gfs2_remove_from_ail(struct gfs2_bufdata *bd)
 /**
  * gfs2_ail1_start_one - Start I/O on a part of the AIL
  * @sdp: the filesystem
- * @tr: the part of the AIL
+ * @wbc: The writeback control structure
+ * @ai: The ail structure
  *
  */
 
-static void gfs2_ail1_start_one(struct gfs2_sbd *sdp, struct gfs2_ail *ai)
+static int gfs2_ail1_start_one(struct gfs2_sbd *sdp,
+			       struct writeback_control *wbc,
+			       struct gfs2_ail *ai)
 __releases(&sdp->sd_ail_lock)
 __acquires(&sdp->sd_ail_lock)
 {
+	struct gfs2_glock *gl = NULL;
+	struct address_space *mapping;
 	struct gfs2_bufdata *bd, *s;
 	struct buffer_head *bh;
-	int retry;
 
-	do {
-		retry = 0;
+	list_for_each_entry_safe_reverse(bd, s, &ai->ai_ail1_list, bd_ail_st_list) {
+		bh = bd->bd_bh;
 
-		list_for_each_entry_safe_reverse(bd, s, &ai->ai_ail1_list,
-						 bd_ail_st_list) {
-			bh = bd->bd_bh;
+		gfs2_assert(sdp, bd->bd_ail == ai);
 
-			gfs2_assert(sdp, bd->bd_ail == ai);
+		if (!buffer_busy(bh)) {
+			if (!buffer_uptodate(bh))
+				gfs2_io_error_bh(sdp, bh);
+			list_move(&bd->bd_ail_st_list, &ai->ai_ail2_list);
+			continue;
+		}
 
-			if (!buffer_busy(bh)) {
-				if (!buffer_uptodate(bh))
-					gfs2_io_error_bh(sdp, bh);
-				list_move(&bd->bd_ail_st_list, &ai->ai_ail2_list);
-				continue;
-			}
+		if (!buffer_dirty(bh))
+			continue;
+		if (gl == bd->bd_gl)
+			continue;
+		gl = bd->bd_gl;
+		list_move(&bd->bd_ail_st_list, &ai->ai_ail1_list);
+		mapping = bh->b_page->mapping;
+		if (!mapping)
+			continue;
+		spin_unlock(&sdp->sd_ail_lock);
+		generic_writepages(mapping, wbc);
+		spin_lock(&sdp->sd_ail_lock);
+		if (wbc->nr_to_write <= 0)
+			break;
+		return 1;
+	}
 
-			if (!buffer_dirty(bh))
-				continue;
+	return 0;
+}
 
-			list_move(&bd->bd_ail_st_list, &ai->ai_ail1_list);
 
-			get_bh(bh);
-			spin_unlock(&sdp->sd_ail_lock);
-			lock_buffer(bh);
-			if (test_clear_buffer_dirty(bh)) {
-				bh->b_end_io = end_buffer_write_sync;
-				submit_bh(WRITE_SYNC, bh);
-			} else {
-				unlock_buffer(bh);
-				brelse(bh);
-			}
-			spin_lock(&sdp->sd_ail_lock);
-
-			retry = 1;
+/**
+ * gfs2_ail1_flush - start writeback of some ail1 entries 
+ * @sdp: The super block
+ * @wbc: The writeback control structure
+ *
+ * Writes back some ail1 entries, according to the limits in the
+ * writeback control structure
+ */
+
+void gfs2_ail1_flush(struct gfs2_sbd *sdp, struct writeback_control *wbc)
+{
+	struct list_head *head = &sdp->sd_ail1_list;
+	struct gfs2_ail *ai;
+
+	trace_gfs2_ail_flush(sdp, wbc, 1);
+	spin_lock(&sdp->sd_ail_lock);
+restart:
+	list_for_each_entry_reverse(ai, head, ai_list) {
+		if (wbc->nr_to_write <= 0)
 			break;
-		}
-	} while (retry);
+		if (gfs2_ail1_start_one(sdp, wbc, ai))
+			goto restart;
+	}
+	spin_unlock(&sdp->sd_ail_lock);
+	trace_gfs2_ail_flush(sdp, wbc, 0);
+}
+
+/**
+ * gfs2_ail1_start - start writeback of all ail1 entries
+ * @sdp: The superblock
+ */
+
+static void gfs2_ail1_start(struct gfs2_sbd *sdp)
+{
+	struct writeback_control wbc = {
+		.sync_mode = WB_SYNC_NONE,
+		.nr_to_write = LONG_MAX,
+		.range_start = 0,
+		.range_end = LLONG_MAX,
+	};
+
+	return gfs2_ail1_flush(sdp, &wbc);
 }
 
 /**
@@ -141,7 +184,7 @@ __acquires(&sdp->sd_ail_lock)
  *
  */
 
-static int gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_ail *ai, int flags)
+static void gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_ail *ai)
 {
 	struct gfs2_bufdata *bd, *s;
 	struct buffer_head *bh;
@@ -149,71 +192,37 @@ static int gfs2_ail1_empty_one(struct gfs2_sbd *sdp, struct gfs2_ail *ai, int fl
 	list_for_each_entry_safe_reverse(bd, s, &ai->ai_ail1_list,
 					 bd_ail_st_list) {
 		bh = bd->bd_bh;
-
 		gfs2_assert(sdp, bd->bd_ail == ai);
-
-		if (buffer_busy(bh)) {
-			if (flags & DIO_ALL)
-				continue;
-			else
-				break;
-		}
-
+		if (buffer_busy(bh))
+			continue;
 		if (!buffer_uptodate(bh))
 			gfs2_io_error_bh(sdp, bh);
-
 		list_move(&bd->bd_ail_st_list, &ai->ai_ail2_list);
 	}
 
-	return list_empty(&ai->ai_ail1_list);
 }
 
-static void gfs2_ail1_start(struct gfs2_sbd *sdp)
-{
-	struct list_head *head;
-	u64 sync_gen;
-	struct gfs2_ail *ai;
-	int done = 0;
-
-	spin_lock(&sdp->sd_ail_lock);
-	head = &sdp->sd_ail1_list;
-	if (list_empty(head)) {
-		spin_unlock(&sdp->sd_ail_lock);
-		return;
-	}
-	sync_gen = sdp->sd_ail_sync_gen++;
-
-	while(!done) {
-		done = 1;
-		list_for_each_entry_reverse(ai, head, ai_list) {
-			if (ai->ai_sync_gen >= sync_gen)
-				continue;
-			ai->ai_sync_gen = sync_gen;
-			gfs2_ail1_start_one(sdp, ai); /* This may drop ail lock */
-			done = 0;
-			break;
-		}
-	}
-
-	spin_unlock(&sdp->sd_ail_lock);
-}
+/**
+ * gfs2_ail1_empty - Try to empty the ail1 lists
+ * @sdp: The superblock
+ *
+ * Tries to empty the ail1 lists, starting with the oldest first
+ */
 
-static int gfs2_ail1_empty(struct gfs2_sbd *sdp, int flags)
+static int gfs2_ail1_empty(struct gfs2_sbd *sdp)
 {
 	struct gfs2_ail *ai, *s;
 	int ret;
 
 	spin_lock(&sdp->sd_ail_lock);
-
 	list_for_each_entry_safe_reverse(ai, s, &sdp->sd_ail1_list, ai_list) {
-		if (gfs2_ail1_empty_one(sdp, ai, flags))
+		gfs2_ail1_empty_one(sdp, ai);
+		if (list_empty(&ai->ai_ail1_list))
 			list_move(&ai->ai_list, &sdp->sd_ail2_list);
-		else if (!(flags & DIO_ALL))
+		else
 			break;
 	}
-
 	ret = list_empty(&sdp->sd_ail1_list);
-
 	spin_unlock(&sdp->sd_ail_lock);
 
 	return ret;
@@ -574,7 +583,7 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull)
 	set_buffer_uptodate(bh);
 	clear_buffer_dirty(bh);
 
-	gfs2_ail1_empty(sdp, 0);
+	gfs2_ail1_empty(sdp);
 	tail = current_tail(sdp);
 
 	lh = (struct gfs2_log_header *)bh->b_data;
@@ -869,7 +878,7 @@ void gfs2_meta_syncfs(struct gfs2_sbd *sdp)
 	gfs2_log_flush(sdp, NULL);
 	for (;;) {
 		gfs2_ail1_start(sdp);
-		if (gfs2_ail1_empty(sdp, DIO_ALL))
+		if (gfs2_ail1_empty(sdp))
 			break;
 		msleep(10);
 	}
@@ -905,17 +914,15 @@ int gfs2_logd(void *data)
 
 		preflush = atomic_read(&sdp->sd_log_pinned);
 		if (gfs2_jrnl_flush_reqd(sdp) || t == 0) {
-			gfs2_ail1_empty(sdp, DIO_ALL);
+			gfs2_ail1_empty(sdp);
 			gfs2_log_flush(sdp, NULL);
-			gfs2_ail1_empty(sdp, DIO_ALL);
 		}
 
 		if (gfs2_ail_flush_reqd(sdp)) {
 			gfs2_ail1_start(sdp);
 			io_schedule();
-			gfs2_ail1_empty(sdp, 0);
+			gfs2_ail1_empty(sdp);
 			gfs2_log_flush(sdp, NULL);
-			gfs2_ail1_empty(sdp, DIO_ALL);
 		}
 
 		wake_up(&sdp->sd_log_waitq);
diff --git a/fs/gfs2/log.h b/fs/gfs2/log.h
index 0d007f92023..ab0621698b7 100644
--- a/fs/gfs2/log.h
+++ b/fs/gfs2/log.h
@@ -12,6 +12,7 @@
 
 #include <linux/list.h>
 #include <linux/spinlock.h>
+#include <linux/writeback.h>
 #include "incore.h"
 
 /**
@@ -59,6 +60,7 @@ extern struct buffer_head *gfs2_log_fake_buf(struct gfs2_sbd *sdp,
 extern void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl);
 extern void gfs2_log_commit(struct gfs2_sbd *sdp, struct gfs2_trans *trans);
 extern void gfs2_remove_from_ail(struct gfs2_bufdata *bd);
+extern void gfs2_ail1_flush(struct gfs2_sbd *sdp, struct writeback_control *wbc);
 
 extern void gfs2_log_shutdown(struct gfs2_sbd *sdp);
 extern void gfs2_meta_syncfs(struct gfs2_sbd *sdp);
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 51d27f00ebb..05bbb124699 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -40,7 +40,7 @@ static void gfs2_pin(struct gfs2_sbd *sdp, struct buffer_head *bh)
 {
 	struct gfs2_bufdata *bd;
 
-	gfs2_assert_withdraw(sdp, test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags));
+	BUG_ON(!current->journal_info);
 
 	clear_buffer_dirty(bh);
 	if (test_set_buffer_pinned(bh))
@@ -65,6 +65,7 @@ static void gfs2_pin(struct gfs2_sbd *sdp, struct buffer_head *bh)
  * @sdp: the filesystem the buffer belongs to
  * @bh: The buffer to unpin
  * @ai:
+ * @flags: The inode dirty flags
  *
  */
 
@@ -73,10 +74,8 @@ static void gfs2_unpin(struct gfs2_sbd *sdp, struct buffer_head *bh,
 {
 	struct gfs2_bufdata *bd = bh->b_private;
 
-	gfs2_assert_withdraw(sdp, buffer_uptodate(bh));
-
-	if (!buffer_pinned(bh))
-		gfs2_assert_withdraw(sdp, 0);
+	BUG_ON(!buffer_uptodate(bh));
+	BUG_ON(!buffer_pinned(bh));
 
 	lock_buffer(bh);
 	mark_buffer_dirty(bh);
@@ -95,8 +94,7 @@ static void gfs2_unpin(struct gfs2_sbd *sdp, struct buffer_head *bh,
 	list_add(&bd->bd_ail_st_list, &ai->ai_ail1_list);
 	spin_unlock(&sdp->sd_ail_lock);
 
-	if (test_and_clear_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags))
-		gfs2_glock_schedule_for_reclaim(bd->bd_gl);
+	clear_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
 	trace_gfs2_pin(bd, 0);
 	unlock_buffer(bh);
 	atomic_dec(&sdp->sd_log_pinned);
@@ -322,12 +320,16 @@ static void buf_lo_after_scan(struct gfs2_jdesc *jd, int error, int pass)
 
 static void revoke_lo_add(struct gfs2_sbd *sdp, struct gfs2_log_element *le)
 {
+	struct gfs2_bufdata *bd = container_of(le, struct gfs2_bufdata, bd_le);
+	struct gfs2_glock *gl = bd->bd_gl;
 	struct gfs2_trans *tr;
 
 	tr = current->journal_info;
 	tr->tr_touched = 1;
 	tr->tr_num_revoke++;
 	sdp->sd_log_num_revoke++;
+	atomic_inc(&gl->gl_revokes);
+	set_bit(GLF_LFLUSH, &gl->gl_flags);
 	list_add(&le->le_list, &sdp->sd_log_le_revoke);
 }
 
@@ -350,9 +352,7 @@ static void revoke_lo_before_commit(struct gfs2_sbd *sdp)
 	ld->ld_data1 = cpu_to_be32(sdp->sd_log_num_revoke);
 	offset = sizeof(struct gfs2_log_descriptor);
 
-	while (!list_empty(head)) {
-		bd = list_entry(head->next, struct gfs2_bufdata, bd_le.le_list);
-		list_del_init(&bd->bd_le.le_list);
+	list_for_each_entry(bd, head, bd_le.le_list) {
 		sdp->sd_log_num_revoke--;
 
 		if (offset + sizeof(u64) > sdp->sd_sb.sb_bsize) {
@@ -367,8 +367,6 @@ static void revoke_lo_before_commit(struct gfs2_sbd *sdp)
 		}
 
 		*(__be64 *)(bh->b_data + offset) = cpu_to_be64(bd->bd_blkno);
-		kmem_cache_free(gfs2_bufdata_cachep, bd);
-
 		offset += sizeof(u64);
 	}
 	gfs2_assert_withdraw(sdp, !sdp->sd_log_num_revoke);
@@ -376,6 +374,22 @@ static void revoke_lo_before_commit(struct gfs2_sbd *sdp)
 	submit_bh(WRITE_SYNC, bh);
 }
 
+static void revoke_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_ail *ai)
+{
+	struct list_head *head = &sdp->sd_log_le_revoke;
+	struct gfs2_bufdata *bd;
+	struct gfs2_glock *gl;
+
+	while (!list_empty(head)) {
+		bd = list_entry(head->next, struct gfs2_bufdata, bd_le.le_list);
+		list_del_init(&bd->bd_le.le_list);
+		gl = bd->bd_gl;
+		atomic_dec(&gl->gl_revokes);
+		clear_bit(GLF_LFLUSH, &gl->gl_flags);
+		kmem_cache_free(gfs2_bufdata_cachep, bd);
+	}
+}
+
 static void revoke_lo_before_scan(struct gfs2_jdesc *jd,
 				  struct gfs2_log_header_host *head, int pass)
 {
@@ -749,6 +763,7 @@ const struct gfs2_log_operations gfs2_buf_lops = {
 const struct gfs2_log_operations gfs2_revoke_lops = {
 	.lo_add = revoke_lo_add,
 	.lo_before_commit = revoke_lo_before_commit,
+	.lo_after_commit = revoke_lo_after_commit,
 	.lo_before_scan = revoke_lo_before_scan,
 	.lo_scan_elements = revoke_lo_scan_elements,
 	.lo_after_scan = revoke_lo_after_scan,
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index 888a5f5a1a5..cfa327d3319 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -53,6 +53,7 @@ static void gfs2_init_glock_once(void *foo)
 	INIT_LIST_HEAD(&gl->gl_lru);
 	INIT_LIST_HEAD(&gl->gl_ail_list);
 	atomic_set(&gl->gl_ail_count, 0);
+	atomic_set(&gl->gl_revokes, 0);
 }
 
 static void gfs2_init_gl_aspace_once(void *foo)
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 675349b5a13..747238cd9f9 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -31,6 +31,7 @@
 #include "rgrp.h"
 #include "trans.h"
 #include "util.h"
+#include "trace_gfs2.h"
 
 static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wbc)
 {
@@ -310,6 +311,7 @@ void gfs2_remove_from_journal(struct buffer_head *bh, struct gfs2_trans *tr, int
 	struct gfs2_bufdata *bd = bh->b_private;
 
 	if (test_clear_buffer_pinned(bh)) {
+		trace_gfs2_pin(bd, 0);
 		atomic_dec(&sdp->sd_log_pinned);
 		list_del_init(&bd->bd_le.le_list);
 		if (meta) {
diff --git a/fs/gfs2/meta_io.h b/fs/gfs2/meta_io.h
index 6a1d9ba1641..22c52659313 100644
--- a/fs/gfs2/meta_io.h
+++ b/fs/gfs2/meta_io.h
@@ -77,8 +77,6 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen);
 
 #define buffer_busy(bh) \
 ((bh)->b_state & ((1ul << BH_Dirty) | (1ul << BH_Lock) | (1ul << BH_Pinned)))
-#define buffer_in_io(bh) \
-((bh)->b_state & ((1ul << BH_Dirty) | (1ul << BH_Lock)))
 
 #endif /* __DIO_DOT_H__ */
 
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 42ef24355af..8ac9ae189b5 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -126,8 +126,10 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb)
  * changed.
  */
 
-static int gfs2_check_sb(struct gfs2_sbd *sdp, struct gfs2_sb_host *sb, int silent)
+static int gfs2_check_sb(struct gfs2_sbd *sdp, int silent)
 {
+	struct gfs2_sb_host *sb = &sdp->sd_sb;
+
 	if (sb->sb_magic != GFS2_MAGIC ||
 	    sb->sb_type != GFS2_METATYPE_SB) {
 		if (!silent)
@@ -157,8 +159,10 @@ static void end_bio_io_page(struct bio *bio, int error)
 	unlock_page(page);
 }
 
-static void gfs2_sb_in(struct gfs2_sb_host *sb, const void *buf)
+static void gfs2_sb_in(struct gfs2_sbd *sdp, const void *buf)
 {
+	struct gfs2_sb_host *sb = &sdp->sd_sb;
+	struct super_block *s = sdp->sd_vfs;
 	const struct gfs2_sb *str = buf;
 
 	sb->sb_magic = be32_to_cpu(str->sb_header.mh_magic);
@@ -175,7 +179,7 @@ static void gfs2_sb_in(struct gfs2_sb_host *sb, const void *buf)
 
 	memcpy(sb->sb_lockproto, str->sb_lockproto, GFS2_LOCKNAME_LEN);
 	memcpy(sb->sb_locktable, str->sb_locktable, GFS2_LOCKNAME_LEN);
-	memcpy(sb->sb_uuid, str->sb_uuid, 16);
+	memcpy(s->s_uuid, str->sb_uuid, 16);
 }
 
 /**
@@ -197,7 +201,7 @@ static void gfs2_sb_in(struct gfs2_sb_host *sb, const void *buf)
  * Returns: 0 on success or error
  */
 
-static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector)
+static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector, int silent)
 {
 	struct super_block *sb = sdp->sd_vfs;
 	struct gfs2_sb *p;
@@ -227,10 +231,10 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector)
 		return -EIO;
 	}
 	p = kmap(page);
-	gfs2_sb_in(&sdp->sd_sb, p);
+	gfs2_sb_in(sdp, p);
 	kunmap(page);
 	__free_page(page);
-	return 0;
+	return gfs2_check_sb(sdp, silent);
 }
 
 /**
@@ -247,17 +251,13 @@ static int gfs2_read_sb(struct gfs2_sbd *sdp, int silent)
 	unsigned int x;
 	int error;
 
-	error = gfs2_read_super(sdp, GFS2_SB_ADDR >> sdp->sd_fsb2bb_shift);
+	error = gfs2_read_super(sdp, GFS2_SB_ADDR >> sdp->sd_fsb2bb_shift, silent);
 	if (error) {
 		if (!silent)
 			fs_err(sdp, "can't read superblock\n");
 		return error;
 	}
 
-	error = gfs2_check_sb(sdp, &sdp->sd_sb, silent);
-	if (error)
-		return error;
-
 	sdp->sd_fsb2bb_shift = sdp->sd_sb.sb_bsize_shift -
 			       GFS2_BASIC_BLOCK_SHIFT;
 	sdp->sd_fsb2bb = 1 << sdp->sd_fsb2bb_shift;
@@ -340,14 +340,10 @@ static int init_names(struct gfs2_sbd *sdp, int silent)
 	/*  Try to autodetect  */
 
 	if (!proto[0] || !table[0]) {
-		error = gfs2_read_super(sdp, GFS2_SB_ADDR >> sdp->sd_fsb2bb_shift);
+		error = gfs2_read_super(sdp, GFS2_SB_ADDR >> sdp->sd_fsb2bb_shift, silent);
 		if (error)
 			return error;
 
-		error = gfs2_check_sb(sdp, &sdp->sd_sb, silent);
-		if (error)
-			goto out;
-
 		if (!proto[0])
 			proto = sdp->sd_sb.sb_lockproto;
 		if (!table[0])
@@ -364,7 +360,6 @@ static int init_names(struct gfs2_sbd *sdp, int silent)
 	while ((table = strchr(table, '/')))
 		*table = '_';
 
-out:
 	return error;
 }
 
@@ -430,7 +425,7 @@ static int gfs2_lookup_root(struct super_block *sb, struct dentry **dptr,
 	struct dentry *dentry;
 	struct inode *inode;
 
-	inode = gfs2_inode_lookup(sb, DT_DIR, no_addr, 0);
+	inode = gfs2_inode_lookup(sb, DT_DIR, no_addr, 0, 0);
 	if (IS_ERR(inode)) {
 		fs_err(sdp, "can't read in %s inode: %ld\n", name, PTR_ERR(inode));
 		return PTR_ERR(inode);
@@ -1119,8 +1114,7 @@ static int fill_super(struct super_block *sb, struct gfs2_args *args, int silent
 	if (sdp->sd_args.ar_statfs_quantum) {
 		sdp->sd_tune.gt_statfs_slow = 0;
 		sdp->sd_tune.gt_statfs_quantum = sdp->sd_args.ar_statfs_quantum;
-	}
-	else {
+	} else {
 		sdp->sd_tune.gt_statfs_slow = 1;
 		sdp->sd_tune.gt_statfs_quantum = 30;
 	}
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
deleted file mode 100644
index 09e436a5072..00000000000
--- a/fs/gfs2/ops_inode.c
+++ /dev/null
@@ -1,1344 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/buffer_head.h>
-#include <linux/namei.h>
-#include <linux/mm.h>
-#include <linux/xattr.h>
-#include <linux/posix_acl.h>
-#include <linux/gfs2_ondisk.h>
-#include <linux/crc32.h>
-#include <linux/fiemap.h>
-#include <asm/uaccess.h>
-
-#include "gfs2.h"
-#include "incore.h"
-#include "acl.h"
-#include "bmap.h"
-#include "dir.h"
-#include "xattr.h"
-#include "glock.h"
-#include "inode.h"
-#include "meta_io.h"
-#include "quota.h"
-#include "rgrp.h"
-#include "trans.h"
-#include "util.h"
-#include "super.h"
-
-/**
- * gfs2_create - Create a file
- * @dir: The directory in which to create the file
- * @dentry: The dentry of the new file
- * @mode: The mode of the new file
- *
- * Returns: errno
- */
-
-static int gfs2_create(struct inode *dir, struct dentry *dentry,
-		       int mode, struct nameidata *nd)
-{
-	struct gfs2_inode *dip = GFS2_I(dir);
-	struct gfs2_sbd *sdp = GFS2_SB(dir);
-	struct gfs2_holder ghs[2];
-	struct inode *inode;
-
-	gfs2_holder_init(dip->i_gl, 0, 0, ghs);
-
-	for (;;) {
-		inode = gfs2_createi(ghs, &dentry->d_name, S_IFREG | mode, 0);
-		if (!IS_ERR(inode)) {
-			gfs2_trans_end(sdp);
-			if (dip->i_alloc->al_rgd)
-				gfs2_inplace_release(dip);
-			gfs2_quota_unlock(dip);
-			gfs2_alloc_put(dip);
-			gfs2_glock_dq_uninit_m(2, ghs);
-			mark_inode_dirty(inode);
-			break;
-		} else if (PTR_ERR(inode) != -EEXIST ||
-			   (nd && nd->flags & LOOKUP_EXCL)) {
-			gfs2_holder_uninit(ghs);
-			return PTR_ERR(inode);
-		}
-
-		inode = gfs2_lookupi(dir, &dentry->d_name, 0);
-		if (inode) {
-			if (!IS_ERR(inode)) {
-				gfs2_holder_uninit(ghs);
-				break;
-			} else {
-				gfs2_holder_uninit(ghs);
-				return PTR_ERR(inode);
-			}
-		}
-	}
-
-	d_instantiate(dentry, inode);
-
-	return 0;
-}
-
-/**
- * gfs2_lookup - Look up a filename in a directory and return its inode
- * @dir: The directory inode
- * @dentry: The dentry of the new inode
- * @nd: passed from Linux VFS, ignored by us
- *
- * Called by the VFS layer. Lock dir and call gfs2_lookupi()
- *
- * Returns: errno
- */
-
-static struct dentry *gfs2_lookup(struct inode *dir, struct dentry *dentry,
-				  struct nameidata *nd)
-{
-	struct inode *inode = NULL;
-
-	inode = gfs2_lookupi(dir, &dentry->d_name, 0);
-	if (inode && IS_ERR(inode))
-		return ERR_CAST(inode);
-
-	if (inode) {
-		struct gfs2_glock *gl = GFS2_I(inode)->i_gl;
-		struct gfs2_holder gh;
-		int error;
-		error = gfs2_glock_nq_init(gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
-		if (error) {
-			iput(inode);
-			return ERR_PTR(error);
-		}
-		gfs2_glock_dq_uninit(&gh);
-		return d_splice_alias(inode, dentry);
-	}
-	d_add(dentry, inode);
-
-	return NULL;
-}
-
-/**
- * gfs2_link - Link to a file
- * @old_dentry: The inode to link
- * @dir: Add link to this directory
- * @dentry: The name of the link
- *
- * Link the inode in "old_dentry" into the directory "dir" with the
- * name in "dentry".
- *
- * Returns: errno
- */
-
-static int gfs2_link(struct dentry *old_dentry, struct inode *dir,
-		     struct dentry *dentry)
-{
-	struct gfs2_inode *dip = GFS2_I(dir);
-	struct gfs2_sbd *sdp = GFS2_SB(dir);
-	struct inode *inode = old_dentry->d_inode;
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder ghs[2];
-	int alloc_required;
-	int error;
-
-	if (S_ISDIR(inode->i_mode))
-		return -EPERM;
-
-	gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
-	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
-
-	error = gfs2_glock_nq(ghs); /* parent */
-	if (error)
-		goto out_parent;
-
-	error = gfs2_glock_nq(ghs + 1); /* child */
-	if (error)
-		goto out_child;
-
-	error = gfs2_permission(dir, MAY_WRITE | MAY_EXEC, 0);
-	if (error)
-		goto out_gunlock;
-
-	error = gfs2_dir_check(dir, &dentry->d_name, NULL);
-	switch (error) {
-	case -ENOENT:
-		break;
-	case 0:
-		error = -EEXIST;
-	default:
-		goto out_gunlock;
-	}
-
-	error = -EINVAL;
-	if (!dip->i_inode.i_nlink)
-		goto out_gunlock;
-	error = -EFBIG;
-	if (dip->i_entries == (u32)-1)
-		goto out_gunlock;
-	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		goto out_gunlock;
-	error = -EINVAL;
-	if (!ip->i_inode.i_nlink)
-		goto out_gunlock;
-	error = -EMLINK;
-	if (ip->i_inode.i_nlink == (u32)-1)
-		goto out_gunlock;
-
-	alloc_required = error = gfs2_diradd_alloc_required(dir, &dentry->d_name);
-	if (error < 0)
-		goto out_gunlock;
-	error = 0;
-
-	if (alloc_required) {
-		struct gfs2_alloc *al = gfs2_alloc_get(dip);
-		if (!al) {
-			error = -ENOMEM;
-			goto out_gunlock;
-		}
-
-		error = gfs2_quota_lock_check(dip);
-		if (error)
-			goto out_alloc;
-
-		al->al_requested = sdp->sd_max_dirres;
-
-		error = gfs2_inplace_reserve(dip);
-		if (error)
-			goto out_gunlock_q;
-
-		error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
-					 gfs2_rg_blocks(al) +
-					 2 * RES_DINODE + RES_STATFS +
-					 RES_QUOTA, 0);
-		if (error)
-			goto out_ipres;
-	} else {
-		error = gfs2_trans_begin(sdp, 2 * RES_DINODE + RES_LEAF, 0);
-		if (error)
-			goto out_ipres;
-	}
-
-	error = gfs2_dir_add(dir, &dentry->d_name, ip, IF2DT(inode->i_mode));
-	if (error)
-		goto out_end_trans;
-
-	error = gfs2_change_nlink(ip, +1);
-
-out_end_trans:
-	gfs2_trans_end(sdp);
-out_ipres:
-	if (alloc_required)
-		gfs2_inplace_release(dip);
-out_gunlock_q:
-	if (alloc_required)
-		gfs2_quota_unlock(dip);
-out_alloc:
-	if (alloc_required)
-		gfs2_alloc_put(dip);
-out_gunlock:
-	gfs2_glock_dq(ghs + 1);
-out_child:
-	gfs2_glock_dq(ghs);
-out_parent:
-	gfs2_holder_uninit(ghs);
-	gfs2_holder_uninit(ghs + 1);
-	if (!error) {
-		ihold(inode);
-		d_instantiate(dentry, inode);
-		mark_inode_dirty(inode);
-	}
-	return error;
-}
-
-/*
- * gfs2_unlink_ok - check to see that a inode is still in a directory
- * @dip: the directory
- * @name: the name of the file
- * @ip: the inode
- *
- * Assumes that the lock on (at least) @dip is held.
- *
- * Returns: 0 if the parent/child relationship is correct, errno if it isn't
- */
-
-static int gfs2_unlink_ok(struct gfs2_inode *dip, const struct qstr *name,
-			  const struct gfs2_inode *ip)
-{
-	int error;
-
-	if (IS_IMMUTABLE(&ip->i_inode) || IS_APPEND(&ip->i_inode))
-		return -EPERM;
-
-	if ((dip->i_inode.i_mode & S_ISVTX) &&
-	    dip->i_inode.i_uid != current_fsuid() &&
-	    ip->i_inode.i_uid != current_fsuid() && !capable(CAP_FOWNER))
-		return -EPERM;
-
-	if (IS_APPEND(&dip->i_inode))
-		return -EPERM;
-
-	error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC, 0);
-	if (error)
-		return error;
-
-	error = gfs2_dir_check(&dip->i_inode, name, ip);
-	if (error)
-		return error;
-
-	return 0;
-}
-
-/**
- * gfs2_unlink - Unlink a file
- * @dir: The inode of the directory containing the file to unlink
- * @dentry: The file itself
- *
- * Unlink a file.  Call gfs2_unlinki()
- *
- * Returns: errno
- */
-
-static int gfs2_unlink(struct inode *dir, struct dentry *dentry)
-{
-	struct gfs2_inode *dip = GFS2_I(dir);
-	struct gfs2_sbd *sdp = GFS2_SB(dir);
-	struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
-	struct gfs2_holder ghs[3];
-	struct gfs2_rgrpd *rgd;
-	struct gfs2_holder ri_gh;
-	int error;
-
-	error = gfs2_rindex_hold(sdp, &ri_gh);
-	if (error)
-		return error;
-
-	gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
-	gfs2_holder_init(ip->i_gl,  LM_ST_EXCLUSIVE, 0, ghs + 1);
-
-	rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
-	gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
-
-
-	error = gfs2_glock_nq(ghs); /* parent */
-	if (error)
-		goto out_parent;
-
-	error = gfs2_glock_nq(ghs + 1); /* child */
-	if (error)
-		goto out_child;
-
-	error = gfs2_glock_nq(ghs + 2); /* rgrp */
-	if (error)
-		goto out_rgrp;
-
-	error = gfs2_unlink_ok(dip, &dentry->d_name, ip);
-	if (error)
-		goto out_gunlock;
-
-	error = gfs2_trans_begin(sdp, 2*RES_DINODE + RES_LEAF + RES_RG_BIT, 0);
-	if (error)
-		goto out_gunlock;
-
-	error = gfs2_dir_del(dip, &dentry->d_name);
-        if (error)
-                goto out_end_trans;
-
-	error = gfs2_change_nlink(ip, -1);
-
-out_end_trans:
-	gfs2_trans_end(sdp);
-out_gunlock:
-	gfs2_glock_dq(ghs + 2);
-out_rgrp:
-	gfs2_holder_uninit(ghs + 2);
-	gfs2_glock_dq(ghs + 1);
-out_child:
-	gfs2_holder_uninit(ghs + 1);
-	gfs2_glock_dq(ghs);
-out_parent:
-	gfs2_holder_uninit(ghs);
-	gfs2_glock_dq_uninit(&ri_gh);
-	return error;
-}
-
-/**
- * gfs2_symlink - Create a symlink
- * @dir: The directory to create the symlink in
- * @dentry: The dentry to put the symlink in
- * @symname: The thing which the link points to
- *
- * Returns: errno
- */
-
-static int gfs2_symlink(struct inode *dir, struct dentry *dentry,
-			const char *symname)
-{
-	struct gfs2_inode *dip = GFS2_I(dir), *ip;
-	struct gfs2_sbd *sdp = GFS2_SB(dir);
-	struct gfs2_holder ghs[2];
-	struct inode *inode;
-	struct buffer_head *dibh;
-	int size;
-	int error;
-
-	/* Must be stuffed with a null terminator for gfs2_follow_link() */
-	size = strlen(symname);
-	if (size > sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode) - 1)
-		return -ENAMETOOLONG;
-
-	gfs2_holder_init(dip->i_gl, 0, 0, ghs);
-
-	inode = gfs2_createi(ghs, &dentry->d_name, S_IFLNK | S_IRWXUGO, 0);
-	if (IS_ERR(inode)) {
-		gfs2_holder_uninit(ghs);
-		return PTR_ERR(inode);
-	}
-
-	ip = ghs[1].gh_gl->gl_object;
-
-	i_size_write(inode, size);
-
-	error = gfs2_meta_inode_buffer(ip, &dibh);
-
-	if (!gfs2_assert_withdraw(sdp, !error)) {
-		gfs2_dinode_out(ip, dibh->b_data);
-		memcpy(dibh->b_data + sizeof(struct gfs2_dinode), symname,
-		       size);
-		brelse(dibh);
-	}
-
-	gfs2_trans_end(sdp);
-	if (dip->i_alloc->al_rgd)
-		gfs2_inplace_release(dip);
-	gfs2_quota_unlock(dip);
-	gfs2_alloc_put(dip);
-
-	gfs2_glock_dq_uninit_m(2, ghs);
-
-	d_instantiate(dentry, inode);
-	mark_inode_dirty(inode);
-
-	return 0;
-}
-
-/**
- * gfs2_mkdir - Make a directory
- * @dir: The parent directory of the new one
- * @dentry: The dentry of the new directory
- * @mode: The mode of the new directory
- *
- * Returns: errno
- */
-
-static int gfs2_mkdir(struct inode *dir, struct dentry *dentry, int mode)
-{
-	struct gfs2_inode *dip = GFS2_I(dir), *ip;
-	struct gfs2_sbd *sdp = GFS2_SB(dir);
-	struct gfs2_holder ghs[2];
-	struct inode *inode;
-	struct buffer_head *dibh;
-	int error;
-
-	gfs2_holder_init(dip->i_gl, 0, 0, ghs);
-
-	inode = gfs2_createi(ghs, &dentry->d_name, S_IFDIR | mode, 0);
-	if (IS_ERR(inode)) {
-		gfs2_holder_uninit(ghs);
-		return PTR_ERR(inode);
-	}
-
-	ip = ghs[1].gh_gl->gl_object;
-
-	ip->i_inode.i_nlink = 2;
-	i_size_write(inode, sdp->sd_sb.sb_bsize - sizeof(struct gfs2_dinode));
-	ip->i_diskflags |= GFS2_DIF_JDATA;
-	ip->i_entries = 2;
-
-	error = gfs2_meta_inode_buffer(ip, &dibh);
-
-	if (!gfs2_assert_withdraw(sdp, !error)) {
-		struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
-		struct gfs2_dirent *dent = (struct gfs2_dirent *)(di+1);
-
-		gfs2_trans_add_bh(ip->i_gl, dibh, 1);
-		gfs2_qstr2dirent(&gfs2_qdot, GFS2_DIRENT_SIZE(gfs2_qdot.len), dent);
-		dent->de_inum = di->di_num; /* already GFS2 endian */
-		dent->de_type = cpu_to_be16(DT_DIR);
-		di->di_entries = cpu_to_be32(1);
-
-		dent = (struct gfs2_dirent *)((char*)dent + GFS2_DIRENT_SIZE(1));
-		gfs2_qstr2dirent(&gfs2_qdotdot, dibh->b_size - GFS2_DIRENT_SIZE(1) - sizeof(struct gfs2_dinode), dent);
-
-		gfs2_inum_out(dip, dent);
-		dent->de_type = cpu_to_be16(DT_DIR);
-
-		gfs2_dinode_out(ip, di);
-
-		brelse(dibh);
-	}
-
-	error = gfs2_change_nlink(dip, +1);
-	gfs2_assert_withdraw(sdp, !error); /* dip already pinned */
-
-	gfs2_trans_end(sdp);
-	if (dip->i_alloc->al_rgd)
-		gfs2_inplace_release(dip);
-	gfs2_quota_unlock(dip);
-	gfs2_alloc_put(dip);
-
-	gfs2_glock_dq_uninit_m(2, ghs);
-
-	d_instantiate(dentry, inode);
-	mark_inode_dirty(inode);
-
-	return 0;
-}
-
-/**
- * gfs2_rmdiri - Remove a directory
- * @dip: The parent directory of the directory to be removed
- * @name: The name of the directory to be removed
- * @ip: The GFS2 inode of the directory to be removed
- *
- * Assumes Glocks on dip and ip are held
- *
- * Returns: errno
- */
-
-static int gfs2_rmdiri(struct gfs2_inode *dip, const struct qstr *name,
-		       struct gfs2_inode *ip)
-{
-	int error;
-
-	if (ip->i_entries != 2) {
-		if (gfs2_consist_inode(ip))
-			gfs2_dinode_print(ip);
-		return -EIO;
-	}
-
-	error = gfs2_dir_del(dip, name);
-	if (error)
-		return error;
-
-	error = gfs2_change_nlink(dip, -1);
-	if (error)
-		return error;
-
-	error = gfs2_dir_del(ip, &gfs2_qdot);
-	if (error)
-		return error;
-
-	error = gfs2_dir_del(ip, &gfs2_qdotdot);
-	if (error)
-		return error;
-
-	/* It looks odd, but it really should be done twice */
-	error = gfs2_change_nlink(ip, -1);
-	if (error)
-		return error;
-
-	error = gfs2_change_nlink(ip, -1);
-	if (error)
-		return error;
-
-	return error;
-}
-
-/**
- * gfs2_rmdir - Remove a directory
- * @dir: The parent directory of the directory to be removed
- * @dentry: The dentry of the directory to remove
- *
- * Remove a directory. Call gfs2_rmdiri()
- *
- * Returns: errno
- */
-
-static int gfs2_rmdir(struct inode *dir, struct dentry *dentry)
-{
-	struct gfs2_inode *dip = GFS2_I(dir);
-	struct gfs2_sbd *sdp = GFS2_SB(dir);
-	struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
-	struct gfs2_holder ghs[3];
-	struct gfs2_rgrpd *rgd;
-	struct gfs2_holder ri_gh;
-	int error;
-
-	error = gfs2_rindex_hold(sdp, &ri_gh);
-	if (error)
-		return error;
-	gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
-	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
-
-	rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
-	gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
-
-	error = gfs2_glock_nq(ghs); /* parent */
-	if (error)
-		goto out_parent;
-
-	error = gfs2_glock_nq(ghs + 1); /* child */
-	if (error)
-		goto out_child;
-
-	error = gfs2_glock_nq(ghs + 2); /* rgrp */
-	if (error)
-		goto out_rgrp;
-
-	error = gfs2_unlink_ok(dip, &dentry->d_name, ip);
-	if (error)
-		goto out_gunlock;
-
-	if (ip->i_entries < 2) {
-		if (gfs2_consist_inode(ip))
-			gfs2_dinode_print(ip);
-		error = -EIO;
-		goto out_gunlock;
-	}
-	if (ip->i_entries > 2) {
-		error = -ENOTEMPTY;
-		goto out_gunlock;
-	}
-
-	error = gfs2_trans_begin(sdp, 2 * RES_DINODE + 3 * RES_LEAF + RES_RG_BIT, 0);
-	if (error)
-		goto out_gunlock;
-
-	error = gfs2_rmdiri(dip, &dentry->d_name, ip);
-
-	gfs2_trans_end(sdp);
-
-out_gunlock:
-	gfs2_glock_dq(ghs + 2);
-out_rgrp:
-	gfs2_holder_uninit(ghs + 2);
-	gfs2_glock_dq(ghs + 1);
-out_child:
-	gfs2_holder_uninit(ghs + 1);
-	gfs2_glock_dq(ghs);
-out_parent:
-	gfs2_holder_uninit(ghs);
-	gfs2_glock_dq_uninit(&ri_gh);
-	return error;
-}
-
-/**
- * gfs2_mknod - Make a special file
- * @dir: The directory in which the special file will reside
- * @dentry: The dentry of the special file
- * @mode: The mode of the special file
- * @rdev: The device specification of the special file
- *
- */
-
-static int gfs2_mknod(struct inode *dir, struct dentry *dentry, int mode,
-		      dev_t dev)
-{
-	struct gfs2_inode *dip = GFS2_I(dir);
-	struct gfs2_sbd *sdp = GFS2_SB(dir);
-	struct gfs2_holder ghs[2];
-	struct inode *inode;
-
-	gfs2_holder_init(dip->i_gl, 0, 0, ghs);
-
-	inode = gfs2_createi(ghs, &dentry->d_name, mode, dev);
-	if (IS_ERR(inode)) {
-		gfs2_holder_uninit(ghs);
-		return PTR_ERR(inode);
-	}
-
-	gfs2_trans_end(sdp);
-	if (dip->i_alloc->al_rgd)
-		gfs2_inplace_release(dip);
-	gfs2_quota_unlock(dip);
-	gfs2_alloc_put(dip);
-
-	gfs2_glock_dq_uninit_m(2, ghs);
-
-	d_instantiate(dentry, inode);
-	mark_inode_dirty(inode);
-
-	return 0;
-}
-
-/*
- * gfs2_ok_to_move - check if it's ok to move a directory to another directory
- * @this: move this
- * @to: to here
- *
- * Follow @to back to the root and make sure we don't encounter @this
- * Assumes we already hold the rename lock.
- *
- * Returns: errno
- */
-
-static int gfs2_ok_to_move(struct gfs2_inode *this, struct gfs2_inode *to)
-{
-	struct inode *dir = &to->i_inode;
-	struct super_block *sb = dir->i_sb;
-	struct inode *tmp;
-	int error = 0;
-
-	igrab(dir);
-
-	for (;;) {
-		if (dir == &this->i_inode) {
-			error = -EINVAL;
-			break;
-		}
-		if (dir == sb->s_root->d_inode) {
-			error = 0;
-			break;
-		}
-
-		tmp = gfs2_lookupi(dir, &gfs2_qdotdot, 1);
-		if (IS_ERR(tmp)) {
-			error = PTR_ERR(tmp);
-			break;
-		}
-
-		iput(dir);
-		dir = tmp;
-	}
-
-	iput(dir);
-
-	return error;
-}
-
-/**
- * gfs2_rename - Rename a file
- * @odir: Parent directory of old file name
- * @odentry: The old dentry of the file
- * @ndir: Parent directory of new file name
- * @ndentry: The new dentry of the file
- *
- * Returns: errno
- */
-
-static int gfs2_rename(struct inode *odir, struct dentry *odentry,
-		       struct inode *ndir, struct dentry *ndentry)
-{
-	struct gfs2_inode *odip = GFS2_I(odir);
-	struct gfs2_inode *ndip = GFS2_I(ndir);
-	struct gfs2_inode *ip = GFS2_I(odentry->d_inode);
-	struct gfs2_inode *nip = NULL;
-	struct gfs2_sbd *sdp = GFS2_SB(odir);
-	struct gfs2_holder ghs[5], r_gh = { .gh_gl = NULL, }, ri_gh;
-	struct gfs2_rgrpd *nrgd;
-	unsigned int num_gh;
-	int dir_rename = 0;
-	int alloc_required = 0;
-	unsigned int x;
-	int error;
-
-	if (ndentry->d_inode) {
-		nip = GFS2_I(ndentry->d_inode);
-		if (ip == nip)
-			return 0;
-	}
-
-	error = gfs2_rindex_hold(sdp, &ri_gh);
-	if (error)
-		return error;
-
-	if (odip != ndip) {
-		error = gfs2_glock_nq_init(sdp->sd_rename_gl, LM_ST_EXCLUSIVE,
-					   0, &r_gh);
-		if (error)
-			goto out;
-
-		if (S_ISDIR(ip->i_inode.i_mode)) {
-			dir_rename = 1;
-			/* don't move a dirctory into it's subdir */
-			error = gfs2_ok_to_move(ip, ndip);
-			if (error)
-				goto out_gunlock_r;
-		}
-	}
-
-	num_gh = 1;
-	gfs2_holder_init(odip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
-	if (odip != ndip) {
-		gfs2_holder_init(ndip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
-		num_gh++;
-	}
-	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
-	num_gh++;
-
-	if (nip) {
-		gfs2_holder_init(nip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
-		num_gh++;
-		/* grab the resource lock for unlink flag twiddling 
-		 * this is the case of the target file already existing
-		 * so we unlink before doing the rename
-		 */
-		nrgd = gfs2_blk2rgrpd(sdp, nip->i_no_addr);
-		if (nrgd)
-			gfs2_holder_init(nrgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh++);
-	}
-
-	for (x = 0; x < num_gh; x++) {
-		error = gfs2_glock_nq(ghs + x);
-		if (error)
-			goto out_gunlock;
-	}
-
-	/* Check out the old directory */
-
-	error = gfs2_unlink_ok(odip, &odentry->d_name, ip);
-	if (error)
-		goto out_gunlock;
-
-	/* Check out the new directory */
-
-	if (nip) {
-		error = gfs2_unlink_ok(ndip, &ndentry->d_name, nip);
-		if (error)
-			goto out_gunlock;
-
-		if (S_ISDIR(nip->i_inode.i_mode)) {
-			if (nip->i_entries < 2) {
-				if (gfs2_consist_inode(nip))
-					gfs2_dinode_print(nip);
-				error = -EIO;
-				goto out_gunlock;
-			}
-			if (nip->i_entries > 2) {
-				error = -ENOTEMPTY;
-				goto out_gunlock;
-			}
-		}
-	} else {
-		error = gfs2_permission(ndir, MAY_WRITE | MAY_EXEC, 0);
-		if (error)
-			goto out_gunlock;
-
-		error = gfs2_dir_check(ndir, &ndentry->d_name, NULL);
-		switch (error) {
-		case -ENOENT:
-			error = 0;
-			break;
-		case 0:
-			error = -EEXIST;
-		default:
-			goto out_gunlock;
-		};
-
-		if (odip != ndip) {
-			if (!ndip->i_inode.i_nlink) {
-				error = -EINVAL;
-				goto out_gunlock;
-			}
-			if (ndip->i_entries == (u32)-1) {
-				error = -EFBIG;
-				goto out_gunlock;
-			}
-			if (S_ISDIR(ip->i_inode.i_mode) &&
-			    ndip->i_inode.i_nlink == (u32)-1) {
-				error = -EMLINK;
-				goto out_gunlock;
-			}
-		}
-	}
-
-	/* Check out the dir to be renamed */
-
-	if (dir_rename) {
-		error = gfs2_permission(odentry->d_inode, MAY_WRITE, 0);
-		if (error)
-			goto out_gunlock;
-	}
-
-	if (nip == NULL)
-		alloc_required = gfs2_diradd_alloc_required(ndir, &ndentry->d_name);
-	error = alloc_required;
-	if (error < 0)
-		goto out_gunlock;
-	error = 0;
-
-	if (alloc_required) {
-		struct gfs2_alloc *al = gfs2_alloc_get(ndip);
-		if (!al) {
-			error = -ENOMEM;
-			goto out_gunlock;
-		}
-
-		error = gfs2_quota_lock_check(ndip);
-		if (error)
-			goto out_alloc;
-
-		al->al_requested = sdp->sd_max_dirres;
-
-		error = gfs2_inplace_reserve_ri(ndip);
-		if (error)
-			goto out_gunlock_q;
-
-		error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
-					 gfs2_rg_blocks(al) +
-					 4 * RES_DINODE + 4 * RES_LEAF +
-					 RES_STATFS + RES_QUOTA + 4, 0);
-		if (error)
-			goto out_ipreserv;
-	} else {
-		error = gfs2_trans_begin(sdp, 4 * RES_DINODE +
-					 5 * RES_LEAF + 4, 0);
-		if (error)
-			goto out_gunlock;
-	}
-
-	/* Remove the target file, if it exists */
-
-	if (nip) {
-		if (S_ISDIR(nip->i_inode.i_mode))
-			error = gfs2_rmdiri(ndip, &ndentry->d_name, nip);
-		else {
-			error = gfs2_dir_del(ndip, &ndentry->d_name);
-			if (error)
-				goto out_end_trans;
-			error = gfs2_change_nlink(nip, -1);
-		}
-		if (error)
-			goto out_end_trans;
-	}
-
-	if (dir_rename) {
-		error = gfs2_change_nlink(ndip, +1);
-		if (error)
-			goto out_end_trans;
-		error = gfs2_change_nlink(odip, -1);
-		if (error)
-			goto out_end_trans;
-
-		error = gfs2_dir_mvino(ip, &gfs2_qdotdot, ndip, DT_DIR);
-		if (error)
-			goto out_end_trans;
-	} else {
-		struct buffer_head *dibh;
-		error = gfs2_meta_inode_buffer(ip, &dibh);
-		if (error)
-			goto out_end_trans;
-		ip->i_inode.i_ctime = CURRENT_TIME;
-		gfs2_trans_add_bh(ip->i_gl, dibh, 1);
-		gfs2_dinode_out(ip, dibh->b_data);
-		brelse(dibh);
-	}
-
-	error = gfs2_dir_del(odip, &odentry->d_name);
-	if (error)
-		goto out_end_trans;
-
-	error = gfs2_dir_add(ndir, &ndentry->d_name, ip, IF2DT(ip->i_inode.i_mode));
-	if (error)
-		goto out_end_trans;
-
-out_end_trans:
-	gfs2_trans_end(sdp);
-out_ipreserv:
-	if (alloc_required)
-		gfs2_inplace_release(ndip);
-out_gunlock_q:
-	if (alloc_required)
-		gfs2_quota_unlock(ndip);
-out_alloc:
-	if (alloc_required)
-		gfs2_alloc_put(ndip);
-out_gunlock:
-	while (x--) {
-		gfs2_glock_dq(ghs + x);
-		gfs2_holder_uninit(ghs + x);
-	}
-out_gunlock_r:
-	if (r_gh.gh_gl)
-		gfs2_glock_dq_uninit(&r_gh);
-out:
-	gfs2_glock_dq_uninit(&ri_gh);
-	return error;
-}
-
-/**
- * gfs2_follow_link - Follow a symbolic link
- * @dentry: The dentry of the link
- * @nd: Data that we pass to vfs_follow_link()
- *
- * This can handle symlinks of any size.
- *
- * Returns: 0 on success or error code
- */
-
-static void *gfs2_follow_link(struct dentry *dentry, struct nameidata *nd)
-{
-	struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
-	struct gfs2_holder i_gh;
-	struct buffer_head *dibh;
-	unsigned int x, size;
-	char *buf;
-	int error;
-
-	gfs2_holder_init(ip->i_gl, LM_ST_SHARED, 0, &i_gh);
-	error = gfs2_glock_nq(&i_gh);
-	if (error) {
-		gfs2_holder_uninit(&i_gh);
-		nd_set_link(nd, ERR_PTR(error));
-		return NULL;
-	}
-
-	size = (unsigned int)i_size_read(&ip->i_inode);
-	if (size == 0) {
-		gfs2_consist_inode(ip);
-		buf = ERR_PTR(-EIO);
-		goto out;
-	}
-
-	error = gfs2_meta_inode_buffer(ip, &dibh);
-	if (error) {
-		buf = ERR_PTR(error);
-		goto out;
-	}
-
-	x = size + 1;
-	buf = kmalloc(x, GFP_NOFS);
-	if (!buf)
-		buf = ERR_PTR(-ENOMEM);
-	else
-		memcpy(buf, dibh->b_data + sizeof(struct gfs2_dinode), x);
-	brelse(dibh);
-out:
-	gfs2_glock_dq_uninit(&i_gh);
-	nd_set_link(nd, buf);
-	return NULL;
-}
-
-static void gfs2_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
-{
-	char *s = nd_get_link(nd);
-	if (!IS_ERR(s))
-		kfree(s);
-}
-
-/**
- * gfs2_permission -
- * @inode: The inode
- * @mask: The mask to be tested
- * @flags: Indicates whether this is an RCU path walk or not
- *
- * This may be called from the VFS directly, or from within GFS2 with the
- * inode locked, so we look to see if the glock is already locked and only
- * lock the glock if its not already been done.
- *
- * Returns: errno
- */
-
-int gfs2_permission(struct inode *inode, int mask, unsigned int flags)
-{
-	struct gfs2_inode *ip;
-	struct gfs2_holder i_gh;
-	int error;
-	int unlock = 0;
-
-
-	ip = GFS2_I(inode);
-	if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
-		if (flags & IPERM_FLAG_RCU)
-			return -ECHILD;
-		error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
-		if (error)
-			return error;
-		unlock = 1;
-	}
-
-	if ((mask & MAY_WRITE) && IS_IMMUTABLE(inode))
-		error = -EACCES;
-	else
-		error = generic_permission(inode, mask, flags, gfs2_check_acl);
-	if (unlock)
-		gfs2_glock_dq_uninit(&i_gh);
-
-	return error;
-}
-
-static int setattr_chown(struct inode *inode, struct iattr *attr)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_sbd *sdp = GFS2_SB(inode);
-	u32 ouid, ogid, nuid, ngid;
-	int error;
-
-	ouid = inode->i_uid;
-	ogid = inode->i_gid;
-	nuid = attr->ia_uid;
-	ngid = attr->ia_gid;
-
-	if (!(attr->ia_valid & ATTR_UID) || ouid == nuid)
-		ouid = nuid = NO_QUOTA_CHANGE;
-	if (!(attr->ia_valid & ATTR_GID) || ogid == ngid)
-		ogid = ngid = NO_QUOTA_CHANGE;
-
-	if (!gfs2_alloc_get(ip))
-		return -ENOMEM;
-
-	error = gfs2_quota_lock(ip, nuid, ngid);
-	if (error)
-		goto out_alloc;
-
-	if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
-		error = gfs2_quota_check(ip, nuid, ngid);
-		if (error)
-			goto out_gunlock_q;
-	}
-
-	error = gfs2_trans_begin(sdp, RES_DINODE + 2 * RES_QUOTA, 0);
-	if (error)
-		goto out_gunlock_q;
-
-	error = gfs2_setattr_simple(ip, attr);
-	if (error)
-		goto out_end_trans;
-
-	if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
-		u64 blocks = gfs2_get_inode_blocks(&ip->i_inode);
-		gfs2_quota_change(ip, -blocks, ouid, ogid);
-		gfs2_quota_change(ip, blocks, nuid, ngid);
-	}
-
-out_end_trans:
-	gfs2_trans_end(sdp);
-out_gunlock_q:
-	gfs2_quota_unlock(ip);
-out_alloc:
-	gfs2_alloc_put(ip);
-	return error;
-}
-
-/**
- * gfs2_setattr - Change attributes on an inode
- * @dentry: The dentry which is changing
- * @attr: The structure describing the change
- *
- * The VFS layer wants to change one or more of an inodes attributes.  Write
- * that change out to disk.
- *
- * Returns: errno
- */
-
-static int gfs2_setattr(struct dentry *dentry, struct iattr *attr)
-{
-	struct inode *inode = dentry->d_inode;
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder i_gh;
-	int error;
-
-	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &i_gh);
-	if (error)
-		return error;
-
-	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		goto out;
-
-	error = inode_change_ok(inode, attr);
-	if (error)
-		goto out;
-
-	if (attr->ia_valid & ATTR_SIZE)
-		error = gfs2_setattr_size(inode, attr->ia_size);
-	else if (attr->ia_valid & (ATTR_UID | ATTR_GID))
-		error = setattr_chown(inode, attr);
-	else if ((attr->ia_valid & ATTR_MODE) && IS_POSIXACL(inode))
-		error = gfs2_acl_chmod(ip, attr);
-	else
-		error = gfs2_setattr_simple(ip, attr);
-
-out:
-	gfs2_glock_dq_uninit(&i_gh);
-	if (!error)
-		mark_inode_dirty(inode);
-	return error;
-}
-
-/**
- * gfs2_getattr - Read out an inode's attributes
- * @mnt: The vfsmount the inode is being accessed from
- * @dentry: The dentry to stat
- * @stat: The inode's stats
- *
- * This may be called from the VFS directly, or from within GFS2 with the
- * inode locked, so we look to see if the glock is already locked and only
- * lock the glock if its not already been done. Note that its the NFS
- * readdirplus operation which causes this to be called (from filldir)
- * with the glock already held.
- *
- * Returns: errno
- */
-
-static int gfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
-			struct kstat *stat)
-{
-	struct inode *inode = dentry->d_inode;
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder gh;
-	int error;
-	int unlock = 0;
-
-	if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
-		error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
-		if (error)
-			return error;
-		unlock = 1;
-	}
-
-	generic_fillattr(inode, stat);
-	if (unlock)
-		gfs2_glock_dq_uninit(&gh);
-
-	return 0;
-}
-
-static int gfs2_setxattr(struct dentry *dentry, const char *name,
-			 const void *data, size_t size, int flags)
-{
-	struct inode *inode = dentry->d_inode;
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder gh;
-	int ret;
-
-	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
-	ret = gfs2_glock_nq(&gh);
-	if (ret == 0) {
-		ret = generic_setxattr(dentry, name, data, size, flags);
-		gfs2_glock_dq(&gh);
-	}
-	gfs2_holder_uninit(&gh);
-	return ret;
-}
-
-static ssize_t gfs2_getxattr(struct dentry *dentry, const char *name,
-			     void *data, size_t size)
-{
-	struct inode *inode = dentry->d_inode;
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder gh;
-	int ret;
-
-	gfs2_holder_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
-	ret = gfs2_glock_nq(&gh);
-	if (ret == 0) {
-		ret = generic_getxattr(dentry, name, data, size);
-		gfs2_glock_dq(&gh);
-	}
-	gfs2_holder_uninit(&gh);
-	return ret;
-}
-
-static int gfs2_removexattr(struct dentry *dentry, const char *name)
-{
-	struct inode *inode = dentry->d_inode;
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder gh;
-	int ret;
-
-	gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
-	ret = gfs2_glock_nq(&gh);
-	if (ret == 0) {
-		ret = generic_removexattr(dentry, name);
-		gfs2_glock_dq(&gh);
-	}
-	gfs2_holder_uninit(&gh);
-	return ret;
-}
-
-static int gfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
-		       u64 start, u64 len)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_holder gh;
-	int ret;
-
-	ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC);
-	if (ret)
-		return ret;
-
-	mutex_lock(&inode->i_mutex);
-
-	ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, 0, &gh);
-	if (ret)
-		goto out;
-
-	if (gfs2_is_stuffed(ip)) {
-		u64 phys = ip->i_no_addr << inode->i_blkbits;
-		u64 size = i_size_read(inode);
-		u32 flags = FIEMAP_EXTENT_LAST|FIEMAP_EXTENT_NOT_ALIGNED|
-			    FIEMAP_EXTENT_DATA_INLINE;
-		phys += sizeof(struct gfs2_dinode);
-		phys += start;
-		if (start + len > size)
-			len = size - start;
-		if (start < size)
-			ret = fiemap_fill_next_extent(fieinfo, start, phys,
-						      len, flags);
-		if (ret == 1)
-			ret = 0;
-	} else {
-		ret = __generic_block_fiemap(inode, fieinfo, start, len,
-					     gfs2_block_map);
-	}
-
-	gfs2_glock_dq_uninit(&gh);
-out:
-	mutex_unlock(&inode->i_mutex);
-	return ret;
-}
-
-const struct inode_operations gfs2_file_iops = {
-	.permission = gfs2_permission,
-	.setattr = gfs2_setattr,
-	.getattr = gfs2_getattr,
-	.setxattr = gfs2_setxattr,
-	.getxattr = gfs2_getxattr,
-	.listxattr = gfs2_listxattr,
-	.removexattr = gfs2_removexattr,
-	.fiemap = gfs2_fiemap,
-};
-
-const struct inode_operations gfs2_dir_iops = {
-	.create = gfs2_create,
-	.lookup = gfs2_lookup,
-	.link = gfs2_link,
-	.unlink = gfs2_unlink,
-	.symlink = gfs2_symlink,
-	.mkdir = gfs2_mkdir,
-	.rmdir = gfs2_rmdir,
-	.mknod = gfs2_mknod,
-	.rename = gfs2_rename,
-	.permission = gfs2_permission,
-	.setattr = gfs2_setattr,
-	.getattr = gfs2_getattr,
-	.setxattr = gfs2_setxattr,
-	.getxattr = gfs2_getxattr,
-	.listxattr = gfs2_listxattr,
-	.removexattr = gfs2_removexattr,
-	.fiemap = gfs2_fiemap,
-};
-
-const struct inode_operations gfs2_symlink_iops = {
-	.readlink = generic_readlink,
-	.follow_link = gfs2_follow_link,
-	.put_link = gfs2_put_link,
-	.permission = gfs2_permission,
-	.setattr = gfs2_setattr,
-	.getattr = gfs2_getattr,
-	.setxattr = gfs2_setxattr,
-	.getxattr = gfs2_getxattr,
-	.listxattr = gfs2_listxattr,
-	.removexattr = gfs2_removexattr,
-	.fiemap = gfs2_fiemap,
-};
-
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index cf930cd9664..7273ad3c85b 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -78,10 +78,11 @@ static u32 rgblk_search(struct gfs2_rgrpd *rgd, u32 goal,
 
 static inline void gfs2_setbit(struct gfs2_rgrpd *rgd, unsigned char *buf1,
 			       unsigned char *buf2, unsigned int offset,
-			       unsigned int buflen, u32 block,
+			       struct gfs2_bitmap *bi, u32 block,
 			       unsigned char new_state)
 {
 	unsigned char *byte1, *byte2, *end, cur_state;
+	unsigned int buflen = bi->bi_len;
 	const unsigned int bit = (block % GFS2_NBBY) * GFS2_BIT_SIZE;
 
 	byte1 = buf1 + offset + (block / GFS2_NBBY);
@@ -92,6 +93,16 @@ static inline void gfs2_setbit(struct gfs2_rgrpd *rgd, unsigned char *buf1,
 	cur_state = (*byte1 >> bit) & GFS2_BIT_MASK;
 
 	if (unlikely(!valid_change[new_state * 4 + cur_state])) {
+		printk(KERN_WARNING "GFS2: buf_blk = 0x%llx old_state=%d, "
+		       "new_state=%d\n",
+		       (unsigned long long)block, cur_state, new_state);
+		printk(KERN_WARNING "GFS2: rgrp=0x%llx bi_start=0x%lx\n",
+		       (unsigned long long)rgd->rd_addr,
+		       (unsigned long)bi->bi_start);
+		printk(KERN_WARNING "GFS2: bi_offset=0x%lx bi_len=0x%lx\n",
+		       (unsigned long)bi->bi_offset,
+		       (unsigned long)bi->bi_len);
+		dump_stack();
 		gfs2_consist_rgrpd(rgd);
 		return;
 	}
@@ -381,6 +392,7 @@ static void clear_rgrpdi(struct gfs2_sbd *sdp)
 
 		if (gl) {
 			gl->gl_object = NULL;
+			gfs2_glock_add_to_lru(gl);
 			gfs2_glock_put(gl);
 		}
 
@@ -945,7 +957,7 @@ static void try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked, u64 skip
 		/* rgblk_search can return a block < goal, so we need to
 		   keep it marching forward. */
 		no_addr = block + rgd->rd_data0;
-		goal++;
+		goal = max(block + 1, goal + 1);
 		if (*last_unlinked != NO_BLOCK && no_addr <= *last_unlinked)
 			continue;
 		if (no_addr == skip)
@@ -971,7 +983,7 @@ static void try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked, u64 skip
 			found++;
 
 		/* Limit reclaim to sensible number of tasks */
-		if (found > 2*NR_CPUS)
+		if (found > NR_CPUS)
 			return;
 	}
 
@@ -1365,7 +1377,7 @@ skip:
 
 	gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
 	gfs2_setbit(rgd, bi->bi_bh->b_data, bi->bi_clone, bi->bi_offset,
-		    bi->bi_len, blk, new_state);
+		    bi, blk, new_state);
 	goal = blk;
 	while (*n < elen) {
 		goal++;
@@ -1375,7 +1387,7 @@ skip:
 		    GFS2_BLKST_FREE)
 			break;
 		gfs2_setbit(rgd, bi->bi_bh->b_data, bi->bi_clone, bi->bi_offset,
-			    bi->bi_len, goal, new_state);
+			    bi, goal, new_state);
 		(*n)++;
 	}
 out:
@@ -1432,7 +1444,7 @@ static struct gfs2_rgrpd *rgblk_free(struct gfs2_sbd *sdp, u64 bstart,
 		}
 		gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1);
 		gfs2_setbit(rgd, bi->bi_bh->b_data, NULL, bi->bi_offset,
-			    bi->bi_len, buf_blk, new_state);
+			    bi, buf_blk, new_state);
 	}
 
 	return rgd;
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index ec73ed70bae..ed540e7018b 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -23,6 +23,7 @@
 #include <linux/time.h>
 #include <linux/wait.h>
 #include <linux/writeback.h>
+#include <linux/backing-dev.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -657,7 +658,7 @@ out:
  * @sdp: the file system
  *
  * This function flushes data and meta data for all machines by
- * aquiring the transaction log exclusively.  All journals are
+ * acquiring the transaction log exclusively.  All journals are
  * ensured to be in a clean state as well.
  *
  * Returns: errno
@@ -700,11 +701,47 @@ void gfs2_unfreeze_fs(struct gfs2_sbd *sdp)
 	mutex_unlock(&sdp->sd_freeze_lock);
 }
 
+void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf)
+{
+	struct gfs2_dinode *str = buf;
+
+	str->di_header.mh_magic = cpu_to_be32(GFS2_MAGIC);
+	str->di_header.mh_type = cpu_to_be32(GFS2_METATYPE_DI);
+	str->di_header.mh_format = cpu_to_be32(GFS2_FORMAT_DI);
+	str->di_num.no_addr = cpu_to_be64(ip->i_no_addr);
+	str->di_num.no_formal_ino = cpu_to_be64(ip->i_no_formal_ino);
+	str->di_mode = cpu_to_be32(ip->i_inode.i_mode);
+	str->di_uid = cpu_to_be32(ip->i_inode.i_uid);
+	str->di_gid = cpu_to_be32(ip->i_inode.i_gid);
+	str->di_nlink = cpu_to_be32(ip->i_inode.i_nlink);
+	str->di_size = cpu_to_be64(i_size_read(&ip->i_inode));
+	str->di_blocks = cpu_to_be64(gfs2_get_inode_blocks(&ip->i_inode));
+	str->di_atime = cpu_to_be64(ip->i_inode.i_atime.tv_sec);
+	str->di_mtime = cpu_to_be64(ip->i_inode.i_mtime.tv_sec);
+	str->di_ctime = cpu_to_be64(ip->i_inode.i_ctime.tv_sec);
+
+	str->di_goal_meta = cpu_to_be64(ip->i_goal);
+	str->di_goal_data = cpu_to_be64(ip->i_goal);
+	str->di_generation = cpu_to_be64(ip->i_generation);
+
+	str->di_flags = cpu_to_be32(ip->i_diskflags);
+	str->di_height = cpu_to_be16(ip->i_height);
+	str->di_payload_format = cpu_to_be32(S_ISDIR(ip->i_inode.i_mode) &&
+					     !(ip->i_diskflags & GFS2_DIF_EXHASH) ?
+					     GFS2_FORMAT_DE : 0);
+	str->di_depth = cpu_to_be16(ip->i_depth);
+	str->di_entries = cpu_to_be32(ip->i_entries);
+
+	str->di_eattr = cpu_to_be64(ip->i_eattr);
+	str->di_atime_nsec = cpu_to_be32(ip->i_inode.i_atime.tv_nsec);
+	str->di_mtime_nsec = cpu_to_be32(ip->i_inode.i_mtime.tv_nsec);
+	str->di_ctime_nsec = cpu_to_be32(ip->i_inode.i_ctime.tv_nsec);
+}
 
 /**
  * gfs2_write_inode - Make sure the inode is stable on the disk
  * @inode: The inode
- * @sync: synchronous write flag
+ * @wbc: The writeback control structure
  *
  * Returns: errno
  */
@@ -713,15 +750,17 @@ static int gfs2_write_inode(struct inode *inode, struct writeback_control *wbc)
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct address_space *metamapping = gfs2_glock2aspace(ip->i_gl);
+	struct backing_dev_info *bdi = metamapping->backing_dev_info;
 	struct gfs2_holder gh;
 	struct buffer_head *bh;
 	struct timespec atime;
 	struct gfs2_dinode *di;
-	int ret = 0;
+	int ret = -EAGAIN;
 
-	/* Check this is a "normal" inode, etc */
+	/* Skip timestamp update, if this is from a memalloc */
 	if (current->flags & PF_MEMALLOC)
-		return 0;
+		goto do_flush;
 	ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
 	if (ret)
 		goto do_flush;
@@ -745,6 +784,13 @@ do_unlock:
 do_flush:
 	if (wbc->sync_mode == WB_SYNC_ALL)
 		gfs2_log_flush(GFS2_SB(inode), ip->i_gl);
+	filemap_fdatawrite(metamapping);
+	if (bdi->dirty_exceeded)
+		gfs2_ail1_flush(sdp, wbc);
+	if (!ret && (wbc->sync_mode == WB_SYNC_ALL))
+		ret = filemap_fdatawait(metamapping);
+	if (ret)
+		mark_inode_dirty_sync(inode);
 	return ret;
 }
 
@@ -874,8 +920,9 @@ restart:
 
 static int gfs2_sync_fs(struct super_block *sb, int wait)
 {
-	if (wait && sb->s_fs_info)
-		gfs2_log_flush(sb->s_fs_info, NULL);
+	struct gfs2_sbd *sdp = sb->s_fs_info;
+	if (wait && sdp)
+		gfs2_log_flush(sdp, NULL);
 	return 0;
 }
 
@@ -1308,6 +1355,78 @@ static int gfs2_show_options(struct seq_file *s, struct vfsmount *mnt)
 	return 0;
 }
 
+static void gfs2_final_release_pages(struct gfs2_inode *ip)
+{
+	struct inode *inode = &ip->i_inode;
+	struct gfs2_glock *gl = ip->i_gl;
+
+	truncate_inode_pages(gfs2_glock2aspace(ip->i_gl), 0);
+	truncate_inode_pages(&inode->i_data, 0);
+
+	if (atomic_read(&gl->gl_revokes) == 0) {
+		clear_bit(GLF_LFLUSH, &gl->gl_flags);
+		clear_bit(GLF_DIRTY, &gl->gl_flags);
+	}
+}
+
+static int gfs2_dinode_dealloc(struct gfs2_inode *ip)
+{
+	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+	struct gfs2_alloc *al;
+	struct gfs2_rgrpd *rgd;
+	int error;
+
+	if (gfs2_get_inode_blocks(&ip->i_inode) != 1) {
+		gfs2_consist_inode(ip);
+		return -EIO;
+	}
+
+	al = gfs2_alloc_get(ip);
+	if (!al)
+		return -ENOMEM;
+
+	error = gfs2_quota_hold(ip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
+	if (error)
+		goto out;
+
+	error = gfs2_rindex_hold(sdp, &al->al_ri_gh);
+	if (error)
+		goto out_qs;
+
+	rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
+	if (!rgd) {
+		gfs2_consist_inode(ip);
+		error = -EIO;
+		goto out_rindex_relse;
+	}
+
+	error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0,
+				   &al->al_rgd_gh);
+	if (error)
+		goto out_rindex_relse;
+
+	error = gfs2_trans_begin(sdp, RES_RG_BIT + RES_STATFS + RES_QUOTA,
+				 sdp->sd_jdesc->jd_blocks);
+	if (error)
+		goto out_rg_gunlock;
+
+	gfs2_free_di(rgd, ip);
+
+	gfs2_final_release_pages(ip);
+
+	gfs2_trans_end(sdp);
+
+out_rg_gunlock:
+	gfs2_glock_dq_uninit(&al->al_rgd_gh);
+out_rindex_relse:
+	gfs2_glock_dq_uninit(&al->al_ri_gh);
+out_qs:
+	gfs2_quota_unhold(ip);
+out:
+	gfs2_alloc_put(ip);
+	return error;
+}
+
 /*
  * We have to (at the moment) hold the inodes main lock to cover
  * the gap between unlocking the shared lock on the iopen lock and
@@ -1318,15 +1437,17 @@ static int gfs2_show_options(struct seq_file *s, struct vfsmount *mnt)
 
 static void gfs2_evict_inode(struct inode *inode)
 {
-	struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
+	struct super_block *sb = inode->i_sb;
+	struct gfs2_sbd *sdp = sb->s_fs_info;
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_holder gh;
 	int error;
 
-	if (inode->i_nlink)
+	if (inode->i_nlink || (sb->s_flags & MS_RDONLY))
 		goto out;
 
-	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+	/* Must not read inode block until block type has been verified */
+	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, GL_SKIP, &gh);
 	if (unlikely(error)) {
 		gfs2_glock_dq_uninit(&ip->i_iopen_gh);
 		goto out;
@@ -1336,6 +1457,12 @@ static void gfs2_evict_inode(struct inode *inode)
 	if (error)
 		goto out_truncate;
 
+	if (test_bit(GIF_INVALID, &ip->i_flags)) {
+		error = gfs2_inode_refresh(ip);
+		if (error)
+			goto out_truncate;
+	}
+
 	ip->i_iopen_gh.gh_flags |= GL_NOCACHE;
 	gfs2_glock_dq_wait(&ip->i_iopen_gh);
 	gfs2_holder_reinit(LM_ST_EXCLUSIVE, LM_FLAG_TRY_1CB | GL_NOCACHE, &ip->i_iopen_gh);
@@ -1363,15 +1490,13 @@ static void gfs2_evict_inode(struct inode *inode)
 	}
 
 	error = gfs2_dinode_dealloc(ip);
-	if (error)
-		goto out_unlock;
+	goto out_unlock;
 
 out_truncate:
 	error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
 	if (error)
 		goto out_unlock;
-	/* Needs to be done before glock release & also in a transaction */
-	truncate_inode_pages(&inode->i_data, 0);
+	gfs2_final_release_pages(ip);
 	gfs2_trans_end(sdp);
 
 out_unlock:
@@ -1386,6 +1511,7 @@ out:
 	end_writeback(inode);
 
 	ip->i_gl->gl_object = NULL;
+	gfs2_glock_add_to_lru(ip->i_gl);
 	gfs2_glock_put(ip->i_gl);
 	ip->i_gl = NULL;
 	if (ip->i_iopen_gh.gh_gl) {
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 748ccb557c1..e20eab37bc8 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -81,7 +81,8 @@ static int gfs2_uuid_valid(const u8 *uuid)
 
 static ssize_t uuid_show(struct gfs2_sbd *sdp, char *buf)
 {
-	const u8 *uuid = sdp->sd_sb.sb_uuid;
+	struct super_block *s = sdp->sd_vfs;
+	const u8 *uuid = s->s_uuid;
 	buf[0] = '\0';
 	if (!gfs2_uuid_valid(uuid))
 		return 0;
@@ -616,7 +617,8 @@ static int gfs2_uevent(struct kset *kset, struct kobject *kobj,
 		       struct kobj_uevent_env *env)
 {
 	struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
-	const u8 *uuid = sdp->sd_sb.sb_uuid;
+	struct super_block *s = sdp->sd_vfs;
+	const u8 *uuid = s->s_uuid;
 
 	add_uevent_var(env, "LOCKTABLE=%s", sdp->sd_table_name);
 	add_uevent_var(env, "LOCKPROTO=%s", sdp->sd_proto_name);
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
index cedb0bb96d9..5d07609ec57 100644
--- a/fs/gfs2/trace_gfs2.h
+++ b/fs/gfs2/trace_gfs2.h
@@ -10,6 +10,7 @@
 #include <linux/buffer_head.h>
 #include <linux/dlmconstants.h>
 #include <linux/gfs2_ondisk.h>
+#include <linux/writeback.h>
 #include "incore.h"
 #include "glock.h"
 
@@ -40,7 +41,9 @@
 	{(1UL << GLF_REPLY_PENDING),		"r" },		\
 	{(1UL << GLF_INITIAL),			"I" },		\
 	{(1UL << GLF_FROZEN),			"F" },		\
-	{(1UL << GLF_QUEUED),			"q" })
+	{(1UL << GLF_QUEUED),			"q" },		\
+	{(1UL << GLF_LRU),			"L" },		\
+	{(1UL << GLF_OBJECT),			"o" })
 
 #ifndef NUMPTY
 #define NUMPTY
@@ -94,7 +97,7 @@ TRACE_EVENT(gfs2_glock_state_change,
 		__entry->new_state	= glock_trace_state(new_state);
 		__entry->tgt_state	= glock_trace_state(gl->gl_target);
 		__entry->dmt_state	= glock_trace_state(gl->gl_demote_state);
-		__entry->flags		= gl->gl_flags;
+		__entry->flags		= gl->gl_flags | (gl->gl_object ? (1UL<<GLF_OBJECT) : 0);
 	),
 
 	TP_printk("%u,%u glock %d:%lld state %s to %s tgt:%s dmt:%s flags:%s",
@@ -127,7 +130,7 @@ TRACE_EVENT(gfs2_glock_put,
 		__entry->gltype		= gl->gl_name.ln_type;
 		__entry->glnum		= gl->gl_name.ln_number;
 		__entry->cur_state	= glock_trace_state(gl->gl_state);
-		__entry->flags		= gl->gl_flags;
+		__entry->flags		= gl->gl_flags  | (gl->gl_object ? (1UL<<GLF_OBJECT) : 0);
 	),
 
 	TP_printk("%u,%u glock %d:%lld state %s => %s flags:%s",
@@ -161,7 +164,7 @@ TRACE_EVENT(gfs2_demote_rq,
 		__entry->glnum		= gl->gl_name.ln_number;
 		__entry->cur_state	= glock_trace_state(gl->gl_state);
 		__entry->dmt_state	= glock_trace_state(gl->gl_demote_state);
-		__entry->flags		= gl->gl_flags;
+		__entry->flags		= gl->gl_flags  | (gl->gl_object ? (1UL<<GLF_OBJECT) : 0);
 	),
 
 	TP_printk("%u,%u glock %d:%lld demote %s to %s flags:%s",
@@ -318,6 +321,33 @@ TRACE_EVENT(gfs2_log_blocks,
 		  MINOR(__entry->dev), __entry->blocks)
 );
 
+/* Writing back the AIL */
+TRACE_EVENT(gfs2_ail_flush,
+
+	TP_PROTO(const struct gfs2_sbd *sdp, const struct writeback_control *wbc, int start),
+
+	TP_ARGS(sdp, wbc, start),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int, start			)
+		__field(	int, sync_mode			)
+		__field(	long, nr_to_write		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= sdp->sd_vfs->s_dev;
+		__entry->start		= start;
+		__entry->sync_mode	= wbc->sync_mode;
+		__entry->nr_to_write	= wbc->nr_to_write;
+	),
+
+	TP_printk("%u,%u ail flush %s %s %ld", MAJOR(__entry->dev),
+		  MINOR(__entry->dev), __entry->start ? "start" : "end",
+		  __entry->sync_mode == WB_SYNC_ALL ? "all" : "none",
+		  __entry->nr_to_write)
+);
+
 /* Section 3 - bmap
  *
  * Objectives:
diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig
index 0c39dc3ef7d..56bd15c5bf6 100644
--- a/fs/hpfs/Kconfig
+++ b/fs/hpfs/Kconfig
@@ -1,7 +1,6 @@
 config HPFS_FS
 	tristate "OS/2 HPFS file system support"
 	depends on BLOCK
-	depends on BROKEN || !PREEMPT
 	help
 	  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
 	  is the file system used for organizing files on OS/2 hard disk
diff --git a/fs/hpfs/alloc.c b/fs/hpfs/alloc.c
index 5503e2c2891..7a5eb2c718c 100644
--- a/fs/hpfs/alloc.c
+++ b/fs/hpfs/alloc.c
@@ -8,8 +8,6 @@
 
 #include "hpfs_fn.h"
 
-static int hpfs_alloc_if_possible_nolock(struct super_block *s, secno sec);
-
 /*
  * Check if a sector is allocated in bitmap
  * This is really slow. Turned on only if chk==2
@@ -18,9 +16,9 @@ static int hpfs_alloc_if_possible_nolock(struct super_block *s, secno sec);
 static int chk_if_allocated(struct super_block *s, secno sec, char *msg)
 {
 	struct quad_buffer_head qbh;
-	unsigned *bmp;
+	u32 *bmp;
 	if (!(bmp = hpfs_map_bitmap(s, sec >> 14, &qbh, "chk"))) goto fail;
-	if ((bmp[(sec & 0x3fff) >> 5] >> (sec & 0x1f)) & 1) {
+	if ((cpu_to_le32(bmp[(sec & 0x3fff) >> 5]) >> (sec & 0x1f)) & 1) {
 		hpfs_error(s, "sector '%s' - %08x not allocated in bitmap", msg, sec);
 		goto fail1;
 	}
@@ -28,7 +26,7 @@ static int chk_if_allocated(struct super_block *s, secno sec, char *msg)
 	if (sec >= hpfs_sb(s)->sb_dirband_start && sec < hpfs_sb(s)->sb_dirband_start + hpfs_sb(s)->sb_dirband_size) {
 		unsigned ssec = (sec - hpfs_sb(s)->sb_dirband_start) / 4;
 		if (!(bmp = hpfs_map_dnode_bitmap(s, &qbh))) goto fail;
-		if ((bmp[ssec >> 5] >> (ssec & 0x1f)) & 1) {
+		if ((le32_to_cpu(bmp[ssec >> 5]) >> (ssec & 0x1f)) & 1) {
 			hpfs_error(s, "sector '%s' - %08x not allocated in directory bitmap", msg, sec);
 			goto fail1;
 		}
@@ -75,7 +73,6 @@ static secno alloc_in_bmp(struct super_block *s, secno near, unsigned n, unsigne
 		hpfs_error(s, "Bad allocation size: %d", n);
 		return 0;
 	}
-	lock_super(s);
 	if (bs != ~0x3fff) {
 		if (!(bmp = hpfs_map_bitmap(s, near >> 14, &qbh, "aib"))) goto uls;
 	} else {
@@ -85,10 +82,6 @@ static secno alloc_in_bmp(struct super_block *s, secno near, unsigned n, unsigne
 		ret = bs + nr;
 		goto rt;
 	}
-	/*if (!tstbits(bmp, nr + n, n + forward)) {
-		ret = bs + nr + n;
-		goto rt;
-	}*/
 	q = nr + n; b = 0;
 	while ((a = tstbits(bmp, q, n + forward)) != 0) {
 		q += a;
@@ -105,14 +98,14 @@ static secno alloc_in_bmp(struct super_block *s, secno near, unsigned n, unsigne
 		goto rt;
 	}
 	nr >>= 5;
-	/*for (i = nr + 1; i != nr; i++, i &= 0x1ff) {*/
+	/*for (i = nr + 1; i != nr; i++, i &= 0x1ff) */
 	i = nr;
 	do {
-		if (!bmp[i]) goto cont;
-		if (n + forward >= 0x3f && bmp[i] != -1) goto cont;
+		if (!le32_to_cpu(bmp[i])) goto cont;
+		if (n + forward >= 0x3f && le32_to_cpu(bmp[i]) != 0xffffffff) goto cont;
 		q = i<<5;
 		if (i > 0) {
-			unsigned k = bmp[i-1];
+			unsigned k = le32_to_cpu(bmp[i-1]);
 			while (k & 0x80000000) {
 				q--; k <<= 1;
 			}
@@ -132,18 +125,17 @@ static secno alloc_in_bmp(struct super_block *s, secno near, unsigned n, unsigne
 	} while (i != nr);
 	rt:
 	if (ret) {
-		if (hpfs_sb(s)->sb_chk && ((ret >> 14) != (bs >> 14) || (bmp[(ret & 0x3fff) >> 5] | ~(((1 << n) - 1) << (ret & 0x1f))) != 0xffffffff)) {
+		if (hpfs_sb(s)->sb_chk && ((ret >> 14) != (bs >> 14) || (le32_to_cpu(bmp[(ret & 0x3fff) >> 5]) | ~(((1 << n) - 1) << (ret & 0x1f))) != 0xffffffff)) {
 			hpfs_error(s, "Allocation doesn't work! Wanted %d, allocated at %08x", n, ret);
 			ret = 0;
 			goto b;
 		}
-		bmp[(ret & 0x3fff) >> 5] &= ~(((1 << n) - 1) << (ret & 0x1f));
+		bmp[(ret & 0x3fff) >> 5] &= cpu_to_le32(~(((1 << n) - 1) << (ret & 0x1f)));
 		hpfs_mark_4buffers_dirty(&qbh);
 	}
 	b:
 	hpfs_brelse4(&qbh);
 	uls:
-	unlock_super(s);
 	return ret;
 }
 
@@ -155,7 +147,7 @@ static secno alloc_in_bmp(struct super_block *s, secno near, unsigned n, unsigne
  *				sectors
  */
 
-secno hpfs_alloc_sector(struct super_block *s, secno near, unsigned n, int forward, int lock)
+secno hpfs_alloc_sector(struct super_block *s, secno near, unsigned n, int forward)
 {
 	secno sec;
 	int i;
@@ -167,7 +159,6 @@ secno hpfs_alloc_sector(struct super_block *s, secno near, unsigned n, int forwa
 		forward = -forward;
 		f_p = 1;
 	}
-	if (lock) hpfs_lock_creation(s);
 	n_bmps = (sbi->sb_fs_size + 0x4000 - 1) >> 14;
 	if (near && near < sbi->sb_fs_size) {
 		if ((sec = alloc_in_bmp(s, near, n, f_p ? forward : forward/4))) goto ret;
@@ -214,18 +205,17 @@ secno hpfs_alloc_sector(struct super_block *s, secno near, unsigned n, int forwa
 	ret:
 	if (sec && f_p) {
 		for (i = 0; i < forward; i++) {
-			if (!hpfs_alloc_if_possible_nolock(s, sec + i + 1)) {
+			if (!hpfs_alloc_if_possible(s, sec + i + 1)) {
 				hpfs_error(s, "Prealloc doesn't work! Wanted %d, allocated at %08x, can't allocate %d", forward, sec, i);
 				sec = 0;
 				break;
 			}
 		}
 	}
-	if (lock) hpfs_unlock_creation(s);
 	return sec;
 }
 
-static secno alloc_in_dirband(struct super_block *s, secno near, int lock)
+static secno alloc_in_dirband(struct super_block *s, secno near)
 {
 	unsigned nr = near;
 	secno sec;
@@ -236,49 +226,35 @@ static secno alloc_in_dirband(struct super_block *s, secno near, int lock)
 		nr = sbi->sb_dirband_start + sbi->sb_dirband_size - 4;
 	nr -= sbi->sb_dirband_start;
 	nr >>= 2;
-	if (lock) hpfs_lock_creation(s);
 	sec = alloc_in_bmp(s, (~0x3fff) | nr, 1, 0);
-	if (lock) hpfs_unlock_creation(s);
 	if (!sec) return 0;
 	return ((sec & 0x3fff) << 2) + sbi->sb_dirband_start;
 }
 
 /* Alloc sector if it's free */
 
-static int hpfs_alloc_if_possible_nolock(struct super_block *s, secno sec)
+int hpfs_alloc_if_possible(struct super_block *s, secno sec)
 {
 	struct quad_buffer_head qbh;
-	unsigned *bmp;
-	lock_super(s);
+	u32 *bmp;
 	if (!(bmp = hpfs_map_bitmap(s, sec >> 14, &qbh, "aip"))) goto end;
-	if (bmp[(sec & 0x3fff) >> 5] & (1 << (sec & 0x1f))) {
-		bmp[(sec & 0x3fff) >> 5] &= ~(1 << (sec & 0x1f));
+	if (le32_to_cpu(bmp[(sec & 0x3fff) >> 5]) & (1 << (sec & 0x1f))) {
+		bmp[(sec & 0x3fff) >> 5] &= cpu_to_le32(~(1 << (sec & 0x1f)));
 		hpfs_mark_4buffers_dirty(&qbh);
 		hpfs_brelse4(&qbh);
-		unlock_super(s);
 		return 1;
 	}
 	hpfs_brelse4(&qbh);
 	end:
-	unlock_super(s);
 	return 0;
 }
 
-int hpfs_alloc_if_possible(struct super_block *s, secno sec)
-{
-	int r;
-	hpfs_lock_creation(s);
-	r = hpfs_alloc_if_possible_nolock(s, sec);
-	hpfs_unlock_creation(s);
-	return r;
-}
-
 /* Free sectors in bitmaps */
 
 void hpfs_free_sectors(struct super_block *s, secno sec, unsigned n)
 {
 	struct quad_buffer_head qbh;
-	unsigned *bmp;
+	u32 *bmp;
 	struct hpfs_sb_info *sbi = hpfs_sb(s);
 	/*printk("2 - ");*/
 	if (!n) return;
@@ -286,26 +262,22 @@ void hpfs_free_sectors(struct super_block *s, secno sec, unsigned n)
 		hpfs_error(s, "Trying to free reserved sector %08x", sec);
 		return;
 	}
-	lock_super(s);
 	sbi->sb_max_fwd_alloc += n > 0xffff ? 0xffff : n;
 	if (sbi->sb_max_fwd_alloc > 0xffffff) sbi->sb_max_fwd_alloc = 0xffffff;
 	new_map:
 	if (!(bmp = hpfs_map_bitmap(s, sec >> 14, &qbh, "free"))) {
-		unlock_super(s);
 		return;
 	}	
 	new_tst:
-	if ((bmp[(sec & 0x3fff) >> 5] >> (sec & 0x1f) & 1)) {
+	if ((le32_to_cpu(bmp[(sec & 0x3fff) >> 5]) >> (sec & 0x1f) & 1)) {
 		hpfs_error(s, "sector %08x not allocated", sec);
 		hpfs_brelse4(&qbh);
-		unlock_super(s);
 		return;
 	}
-	bmp[(sec & 0x3fff) >> 5] |= 1 << (sec & 0x1f);
+	bmp[(sec & 0x3fff) >> 5] |= cpu_to_le32(1 << (sec & 0x1f));
 	if (!--n) {
 		hpfs_mark_4buffers_dirty(&qbh);
 		hpfs_brelse4(&qbh);
-		unlock_super(s);
 		return;
 	}	
 	if (!(++sec & 0x3fff)) {
@@ -327,13 +299,13 @@ int hpfs_check_free_dnodes(struct super_block *s, int n)
 	int n_bmps = (hpfs_sb(s)->sb_fs_size + 0x4000 - 1) >> 14;
 	int b = hpfs_sb(s)->sb_c_bitmap & 0x0fffffff;
 	int i, j;
-	unsigned *bmp;
+	u32 *bmp;
 	struct quad_buffer_head qbh;
 	if ((bmp = hpfs_map_dnode_bitmap(s, &qbh))) {
 		for (j = 0; j < 512; j++) {
 			unsigned k;
-			if (!bmp[j]) continue;
-			for (k = bmp[j]; k; k >>= 1) if (k & 1) if (!--n) {
+			if (!le32_to_cpu(bmp[j])) continue;
+			for (k = le32_to_cpu(bmp[j]); k; k >>= 1) if (k & 1) if (!--n) {
 				hpfs_brelse4(&qbh);
 				return 0;
 			}
@@ -352,10 +324,10 @@ int hpfs_check_free_dnodes(struct super_block *s, int n)
 	chk_bmp:
 	if (bmp) {
 		for (j = 0; j < 512; j++) {
-			unsigned k;
-			if (!bmp[j]) continue;
+			u32 k;
+			if (!le32_to_cpu(bmp[j])) continue;
 			for (k = 0xf; k; k <<= 4)
-				if ((bmp[j] & k) == k) {
+				if ((le32_to_cpu(bmp[j]) & k) == k) {
 					if (!--n) {
 						hpfs_brelse4(&qbh);
 						return 0;
@@ -379,44 +351,40 @@ void hpfs_free_dnode(struct super_block *s, dnode_secno dno)
 		hpfs_free_sectors(s, dno, 4);
 	} else {
 		struct quad_buffer_head qbh;
-		unsigned *bmp;
+		u32 *bmp;
 		unsigned ssec = (dno - hpfs_sb(s)->sb_dirband_start) / 4;
-		lock_super(s);
 		if (!(bmp = hpfs_map_dnode_bitmap(s, &qbh))) {
-			unlock_super(s);
 			return;
 		}
-		bmp[ssec >> 5] |= 1 << (ssec & 0x1f);
+		bmp[ssec >> 5] |= cpu_to_le32(1 << (ssec & 0x1f));
 		hpfs_mark_4buffers_dirty(&qbh);
 		hpfs_brelse4(&qbh);
-		unlock_super(s);
 	}
 }
 
 struct dnode *hpfs_alloc_dnode(struct super_block *s, secno near,
-			 dnode_secno *dno, struct quad_buffer_head *qbh,
-			 int lock)
+			 dnode_secno *dno, struct quad_buffer_head *qbh)
 {
 	struct dnode *d;
 	if (hpfs_count_one_bitmap(s, hpfs_sb(s)->sb_dmap) > FREE_DNODES_ADD) {
-		if (!(*dno = alloc_in_dirband(s, near, lock)))
-			if (!(*dno = hpfs_alloc_sector(s, near, 4, 0, lock))) return NULL;
+		if (!(*dno = alloc_in_dirband(s, near)))
+			if (!(*dno = hpfs_alloc_sector(s, near, 4, 0))) return NULL;
 	} else {
-		if (!(*dno = hpfs_alloc_sector(s, near, 4, 0, lock)))
-			if (!(*dno = alloc_in_dirband(s, near, lock))) return NULL;
+		if (!(*dno = hpfs_alloc_sector(s, near, 4, 0)))
+			if (!(*dno = alloc_in_dirband(s, near))) return NULL;
 	}
 	if (!(d = hpfs_get_4sectors(s, *dno, qbh))) {
 		hpfs_free_dnode(s, *dno);
 		return NULL;
 	}
 	memset(d, 0, 2048);
-	d->magic = DNODE_MAGIC;
-	d->first_free = 52;
+	d->magic = cpu_to_le32(DNODE_MAGIC);
+	d->first_free = cpu_to_le32(52);
 	d->dirent[0] = 32;
 	d->dirent[2] = 8;
 	d->dirent[30] = 1;
 	d->dirent[31] = 255;
-	d->self = *dno;
+	d->self = cpu_to_le32(*dno);
 	return d;
 }
 
@@ -424,16 +392,16 @@ struct fnode *hpfs_alloc_fnode(struct super_block *s, secno near, fnode_secno *f
 			  struct buffer_head **bh)
 {
 	struct fnode *f;
-	if (!(*fno = hpfs_alloc_sector(s, near, 1, FNODE_ALLOC_FWD, 1))) return NULL;
+	if (!(*fno = hpfs_alloc_sector(s, near, 1, FNODE_ALLOC_FWD))) return NULL;
 	if (!(f = hpfs_get_sector(s, *fno, bh))) {
 		hpfs_free_sectors(s, *fno, 1);
 		return NULL;
 	}	
 	memset(f, 0, 512);
-	f->magic = FNODE_MAGIC;
-	f->ea_offs = 0xc4;
+	f->magic = cpu_to_le32(FNODE_MAGIC);
+	f->ea_offs = cpu_to_le16(0xc4);
 	f->btree.n_free_nodes = 8;
-	f->btree.first_free = 8;
+	f->btree.first_free = cpu_to_le16(8);
 	return f;
 }
 
@@ -441,16 +409,16 @@ struct anode *hpfs_alloc_anode(struct super_block *s, secno near, anode_secno *a
 			  struct buffer_head **bh)
 {
 	struct anode *a;
-	if (!(*ano = hpfs_alloc_sector(s, near, 1, ANODE_ALLOC_FWD, 1))) return NULL;
+	if (!(*ano = hpfs_alloc_sector(s, near, 1, ANODE_ALLOC_FWD))) return NULL;
 	if (!(a = hpfs_get_sector(s, *ano, bh))) {
 		hpfs_free_sectors(s, *ano, 1);
 		return NULL;
 	}
 	memset(a, 0, 512);
-	a->magic = ANODE_MAGIC;
-	a->self = *ano;
+	a->magic = cpu_to_le32(ANODE_MAGIC);
+	a->self = cpu_to_le32(*ano);
 	a->btree.n_free_nodes = 40;
 	a->btree.n_used_nodes = 0;
-	a->btree.first_free = 8;
+	a->btree.first_free = cpu_to_le16(8);
 	return a;
 }
diff --git a/fs/hpfs/anode.c b/fs/hpfs/anode.c
index 6a2f04bf3df..08b503e8ed2 100644
--- a/fs/hpfs/anode.c
+++ b/fs/hpfs/anode.c
@@ -22,8 +22,8 @@ secno hpfs_bplus_lookup(struct super_block *s, struct inode *inode,
 	if (hpfs_sb(s)->sb_chk) if (hpfs_stop_cycles(s, a, &c1, &c2, "hpfs_bplus_lookup")) return -1;
 	if (btree->internal) {
 		for (i = 0; i < btree->n_used_nodes; i++)
-			if (btree->u.internal[i].file_secno > sec) {
-				a = btree->u.internal[i].down;
+			if (le32_to_cpu(btree->u.internal[i].file_secno) > sec) {
+				a = le32_to_cpu(btree->u.internal[i].down);
 				brelse(bh);
 				if (!(anode = hpfs_map_anode(s, a, &bh))) return -1;
 				btree = &anode->btree;
@@ -34,18 +34,18 @@ secno hpfs_bplus_lookup(struct super_block *s, struct inode *inode,
 		return -1;
 	}
 	for (i = 0; i < btree->n_used_nodes; i++)
-		if (btree->u.external[i].file_secno <= sec &&
-		    btree->u.external[i].file_secno + btree->u.external[i].length > sec) {
-			a = btree->u.external[i].disk_secno + sec - btree->u.external[i].file_secno;
+		if (le32_to_cpu(btree->u.external[i].file_secno) <= sec &&
+		    le32_to_cpu(btree->u.external[i].file_secno) + le32_to_cpu(btree->u.external[i].length) > sec) {
+			a = le32_to_cpu(btree->u.external[i].disk_secno) + sec - le32_to_cpu(btree->u.external[i].file_secno);
 			if (hpfs_sb(s)->sb_chk) if (hpfs_chk_sectors(s, a, 1, "data")) {
 				brelse(bh);
 				return -1;
 			}
 			if (inode) {
 				struct hpfs_inode_info *hpfs_inode = hpfs_i(inode);
-				hpfs_inode->i_file_sec = btree->u.external[i].file_secno;
-				hpfs_inode->i_disk_sec = btree->u.external[i].disk_secno;
-				hpfs_inode->i_n_secs = btree->u.external[i].length;
+				hpfs_inode->i_file_sec = le32_to_cpu(btree->u.external[i].file_secno);
+				hpfs_inode->i_disk_sec = le32_to_cpu(btree->u.external[i].disk_secno);
+				hpfs_inode->i_n_secs = le32_to_cpu(btree->u.external[i].length);
 			}
 			brelse(bh);
 			return a;
@@ -83,8 +83,8 @@ secno hpfs_add_sector_to_btree(struct super_block *s, secno node, int fnod, unsi
 		return -1;
 	}
 	if (btree->internal) {
-		a = btree->u.internal[n].down;
-		btree->u.internal[n].file_secno = -1;
+		a = le32_to_cpu(btree->u.internal[n].down);
+		btree->u.internal[n].file_secno = cpu_to_le32(-1);
 		mark_buffer_dirty(bh);
 		brelse(bh);
 		if (hpfs_sb(s)->sb_chk)
@@ -94,15 +94,15 @@ secno hpfs_add_sector_to_btree(struct super_block *s, secno node, int fnod, unsi
 		goto go_down;
 	}
 	if (n >= 0) {
-		if (btree->u.external[n].file_secno + btree->u.external[n].length != fsecno) {
+		if (le32_to_cpu(btree->u.external[n].file_secno) + le32_to_cpu(btree->u.external[n].length) != fsecno) {
 			hpfs_error(s, "allocated size %08x, trying to add sector %08x, %cnode %08x",
-				btree->u.external[n].file_secno + btree->u.external[n].length, fsecno,
+				le32_to_cpu(btree->u.external[n].file_secno) + le32_to_cpu(btree->u.external[n].length), fsecno,
 				fnod?'f':'a', node);
 			brelse(bh);
 			return -1;
 		}
-		if (hpfs_alloc_if_possible(s, se = btree->u.external[n].disk_secno + btree->u.external[n].length)) {
-			btree->u.external[n].length++;
+		if (hpfs_alloc_if_possible(s, se = le32_to_cpu(btree->u.external[n].disk_secno) + le32_to_cpu(btree->u.external[n].length))) {
+			btree->u.external[n].length = cpu_to_le32(le32_to_cpu(btree->u.external[n].length) + 1);
 			mark_buffer_dirty(bh);
 			brelse(bh);
 			return se;
@@ -115,20 +115,20 @@ secno hpfs_add_sector_to_btree(struct super_block *s, secno node, int fnod, unsi
 		}
 		se = !fnod ? node : (node + 16384) & ~16383;
 	}	
-	if (!(se = hpfs_alloc_sector(s, se, 1, fsecno*ALLOC_M>ALLOC_FWD_MAX ? ALLOC_FWD_MAX : fsecno*ALLOC_M<ALLOC_FWD_MIN ? ALLOC_FWD_MIN : fsecno*ALLOC_M, 1))) {
+	if (!(se = hpfs_alloc_sector(s, se, 1, fsecno*ALLOC_M>ALLOC_FWD_MAX ? ALLOC_FWD_MAX : fsecno*ALLOC_M<ALLOC_FWD_MIN ? ALLOC_FWD_MIN : fsecno*ALLOC_M))) {
 		brelse(bh);
 		return -1;
 	}
-	fs = n < 0 ? 0 : btree->u.external[n].file_secno + btree->u.external[n].length;
+	fs = n < 0 ? 0 : le32_to_cpu(btree->u.external[n].file_secno) + le32_to_cpu(btree->u.external[n].length);
 	if (!btree->n_free_nodes) {
-		up = a != node ? anode->up : -1;
+		up = a != node ? le32_to_cpu(anode->up) : -1;
 		if (!(anode = hpfs_alloc_anode(s, a, &na, &bh1))) {
 			brelse(bh);
 			hpfs_free_sectors(s, se, 1);
 			return -1;
 		}
 		if (a == node && fnod) {
-			anode->up = node;
+			anode->up = cpu_to_le32(node);
 			anode->btree.fnode_parent = 1;
 			anode->btree.n_used_nodes = btree->n_used_nodes;
 			anode->btree.first_free = btree->first_free;
@@ -137,9 +137,9 @@ secno hpfs_add_sector_to_btree(struct super_block *s, secno node, int fnod, unsi
 			btree->internal = 1;
 			btree->n_free_nodes = 11;
 			btree->n_used_nodes = 1;
-			btree->first_free = (char *)&(btree->u.internal[1]) - (char *)btree;
-			btree->u.internal[0].file_secno = -1;
-			btree->u.internal[0].down = na;
+			btree->first_free = cpu_to_le16((char *)&(btree->u.internal[1]) - (char *)btree);
+			btree->u.internal[0].file_secno = cpu_to_le32(-1);
+			btree->u.internal[0].down = cpu_to_le32(na);
 			mark_buffer_dirty(bh);
 		} else if (!(ranode = hpfs_alloc_anode(s, /*a*/0, &ra, &bh2))) {
 			brelse(bh);
@@ -153,15 +153,15 @@ secno hpfs_add_sector_to_btree(struct super_block *s, secno node, int fnod, unsi
 		btree = &anode->btree;
 	}
 	btree->n_free_nodes--; n = btree->n_used_nodes++;
-	btree->first_free += 12;
-	btree->u.external[n].disk_secno = se;
-	btree->u.external[n].file_secno = fs;
-	btree->u.external[n].length = 1;
+	btree->first_free = cpu_to_le16(le16_to_cpu(btree->first_free) + 12);
+	btree->u.external[n].disk_secno = cpu_to_le32(se);
+	btree->u.external[n].file_secno = cpu_to_le32(fs);
+	btree->u.external[n].length = cpu_to_le32(1);
 	mark_buffer_dirty(bh);
 	brelse(bh);
 	if ((a == node && fnod) || na == -1) return se;
 	c2 = 0;
-	while (up != -1) {
+	while (up != (anode_secno)-1) {
 		struct anode *new_anode;
 		if (hpfs_sb(s)->sb_chk)
 			if (hpfs_stop_cycles(s, up, &c1, &c2, "hpfs_add_sector_to_btree #2")) return -1;
@@ -174,47 +174,47 @@ secno hpfs_add_sector_to_btree(struct super_block *s, secno node, int fnod, unsi
 		}
 		if (btree->n_free_nodes) {
 			btree->n_free_nodes--; n = btree->n_used_nodes++;
-			btree->first_free += 8;
-			btree->u.internal[n].file_secno = -1;
-			btree->u.internal[n].down = na;
-			btree->u.internal[n-1].file_secno = fs;
+			btree->first_free = cpu_to_le16(le16_to_cpu(btree->first_free) + 8);
+			btree->u.internal[n].file_secno = cpu_to_le32(-1);
+			btree->u.internal[n].down = cpu_to_le32(na);
+			btree->u.internal[n-1].file_secno = cpu_to_le32(fs);
 			mark_buffer_dirty(bh);
 			brelse(bh);
 			brelse(bh2);
 			hpfs_free_sectors(s, ra, 1);
 			if ((anode = hpfs_map_anode(s, na, &bh))) {
-				anode->up = up;
+				anode->up = cpu_to_le32(up);
 				anode->btree.fnode_parent = up == node && fnod;
 				mark_buffer_dirty(bh);
 				brelse(bh);
 			}
 			return se;
 		}
-		up = up != node ? anode->up : -1;
-		btree->u.internal[btree->n_used_nodes - 1].file_secno = /*fs*/-1;
+		up = up != node ? le32_to_cpu(anode->up) : -1;
+		btree->u.internal[btree->n_used_nodes - 1].file_secno = cpu_to_le32(/*fs*/-1);
 		mark_buffer_dirty(bh);
 		brelse(bh);
 		a = na;
 		if ((new_anode = hpfs_alloc_anode(s, a, &na, &bh))) {
 			anode = new_anode;
-			/*anode->up = up != -1 ? up : ra;*/
+			/*anode->up = cpu_to_le32(up != -1 ? up : ra);*/
 			anode->btree.internal = 1;
 			anode->btree.n_used_nodes = 1;
 			anode->btree.n_free_nodes = 59;
-			anode->btree.first_free = 16;
-			anode->btree.u.internal[0].down = a;
-			anode->btree.u.internal[0].file_secno = -1;
+			anode->btree.first_free = cpu_to_le16(16);
+			anode->btree.u.internal[0].down = cpu_to_le32(a);
+			anode->btree.u.internal[0].file_secno = cpu_to_le32(-1);
 			mark_buffer_dirty(bh);
 			brelse(bh);
 			if ((anode = hpfs_map_anode(s, a, &bh))) {
-				anode->up = na;
+				anode->up = cpu_to_le32(na);
 				mark_buffer_dirty(bh);
 				brelse(bh);
 			}
 		} else na = a;
 	}
 	if ((anode = hpfs_map_anode(s, na, &bh))) {
-		anode->up = node;
+		anode->up = cpu_to_le32(node);
 		if (fnod) anode->btree.fnode_parent = 1;
 		mark_buffer_dirty(bh);
 		brelse(bh);
@@ -232,14 +232,14 @@ secno hpfs_add_sector_to_btree(struct super_block *s, secno node, int fnod, unsi
 		}
 		btree = &fnode->btree;
 	}
-	ranode->up = node;
-	memcpy(&ranode->btree, btree, btree->first_free);
+	ranode->up = cpu_to_le32(node);
+	memcpy(&ranode->btree, btree, le16_to_cpu(btree->first_free));
 	if (fnod) ranode->btree.fnode_parent = 1;
 	ranode->btree.n_free_nodes = (ranode->btree.internal ? 60 : 40) - ranode->btree.n_used_nodes;
 	if (ranode->btree.internal) for (n = 0; n < ranode->btree.n_used_nodes; n++) {
 		struct anode *unode;
-		if ((unode = hpfs_map_anode(s, ranode->u.internal[n].down, &bh1))) {
-			unode->up = ra;
+		if ((unode = hpfs_map_anode(s, le32_to_cpu(ranode->u.internal[n].down), &bh1))) {
+			unode->up = cpu_to_le32(ra);
 			unode->btree.fnode_parent = 0;
 			mark_buffer_dirty(bh1);
 			brelse(bh1);
@@ -248,11 +248,11 @@ secno hpfs_add_sector_to_btree(struct super_block *s, secno node, int fnod, unsi
 	btree->internal = 1;
 	btree->n_free_nodes = fnod ? 10 : 58;
 	btree->n_used_nodes = 2;
-	btree->first_free = (char *)&btree->u.internal[2] - (char *)btree;
-	btree->u.internal[0].file_secno = fs;
-	btree->u.internal[0].down = ra;
-	btree->u.internal[1].file_secno = -1;
-	btree->u.internal[1].down = na;
+	btree->first_free = cpu_to_le16((char *)&btree->u.internal[2] - (char *)btree);
+	btree->u.internal[0].file_secno = cpu_to_le32(fs);
+	btree->u.internal[0].down = cpu_to_le32(ra);
+	btree->u.internal[1].file_secno = cpu_to_le32(-1);
+	btree->u.internal[1].down = cpu_to_le32(na);
 	mark_buffer_dirty(bh);
 	brelse(bh);
 	mark_buffer_dirty(bh2);
@@ -279,7 +279,7 @@ void hpfs_remove_btree(struct super_block *s, struct bplus_header *btree)
 	go_down:
 	d2 = 0;
 	while (btree1->internal) {
-		ano = btree1->u.internal[pos].down;
+		ano = le32_to_cpu(btree1->u.internal[pos].down);
 		if (level) brelse(bh);
 		if (hpfs_sb(s)->sb_chk)
 			if (hpfs_stop_cycles(s, ano, &d1, &d2, "hpfs_remove_btree #1"))
@@ -290,7 +290,7 @@ void hpfs_remove_btree(struct super_block *s, struct bplus_header *btree)
 		pos = 0;
 	}
 	for (i = 0; i < btree1->n_used_nodes; i++)
-		hpfs_free_sectors(s, btree1->u.external[i].disk_secno, btree1->u.external[i].length);
+		hpfs_free_sectors(s, le32_to_cpu(btree1->u.external[i].disk_secno), le32_to_cpu(btree1->u.external[i].length));
 	go_up:
 	if (!level) return;
 	brelse(bh);
@@ -298,13 +298,13 @@ void hpfs_remove_btree(struct super_block *s, struct bplus_header *btree)
 		if (hpfs_stop_cycles(s, ano, &c1, &c2, "hpfs_remove_btree #2")) return;
 	hpfs_free_sectors(s, ano, 1);
 	oano = ano;
-	ano = anode->up;
+	ano = le32_to_cpu(anode->up);
 	if (--level) {
 		if (!(anode = hpfs_map_anode(s, ano, &bh))) return;
 		btree1 = &anode->btree;
 	} else btree1 = btree;
 	for (i = 0; i < btree1->n_used_nodes; i++) {
-		if (btree1->u.internal[i].down == oano) {
+		if (le32_to_cpu(btree1->u.internal[i].down) == oano) {
 			if ((pos = i + 1) < btree1->n_used_nodes)
 				goto go_down;
 			else
@@ -411,7 +411,7 @@ void hpfs_truncate_btree(struct super_block *s, secno f, int fno, unsigned secs)
 		if (fno) {
 			btree->n_free_nodes = 8;
 			btree->n_used_nodes = 0;
-			btree->first_free = 8;
+			btree->first_free = cpu_to_le16(8);
 			btree->internal = 0;
 			mark_buffer_dirty(bh);
 		} else hpfs_free_sectors(s, f, 1);
@@ -421,22 +421,22 @@ void hpfs_truncate_btree(struct super_block *s, secno f, int fno, unsigned secs)
 	while (btree->internal) {
 		nodes = btree->n_used_nodes + btree->n_free_nodes;
 		for (i = 0; i < btree->n_used_nodes; i++)
-			if (btree->u.internal[i].file_secno >= secs) goto f;
+			if (le32_to_cpu(btree->u.internal[i].file_secno) >= secs) goto f;
 		brelse(bh);
 		hpfs_error(s, "internal btree %08x doesn't end with -1", node);
 		return;
 		f:
 		for (j = i + 1; j < btree->n_used_nodes; j++)
-			hpfs_ea_remove(s, btree->u.internal[j].down, 1, 0);
+			hpfs_ea_remove(s, le32_to_cpu(btree->u.internal[j].down), 1, 0);
 		btree->n_used_nodes = i + 1;
 		btree->n_free_nodes = nodes - btree->n_used_nodes;
-		btree->first_free = 8 + 8 * btree->n_used_nodes;
+		btree->first_free = cpu_to_le16(8 + 8 * btree->n_used_nodes);
 		mark_buffer_dirty(bh);
-		if (btree->u.internal[i].file_secno == secs) {
+		if (btree->u.internal[i].file_secno == cpu_to_le32(secs)) {
 			brelse(bh);
 			return;
 		}
-		node = btree->u.internal[i].down;
+		node = le32_to_cpu(btree->u.internal[i].down);
 		brelse(bh);
 		if (hpfs_sb(s)->sb_chk)
 			if (hpfs_stop_cycles(s, node, &c1, &c2, "hpfs_truncate_btree"))
@@ -446,25 +446,25 @@ void hpfs_truncate_btree(struct super_block *s, secno f, int fno, unsigned secs)
 	}	
 	nodes = btree->n_used_nodes + btree->n_free_nodes;
 	for (i = 0; i < btree->n_used_nodes; i++)
-		if (btree->u.external[i].file_secno + btree->u.external[i].length >= secs) goto ff;
+		if (le32_to_cpu(btree->u.external[i].file_secno) + le32_to_cpu(btree->u.external[i].length) >= secs) goto ff;
 	brelse(bh);
 	return;
 	ff:
-	if (secs <= btree->u.external[i].file_secno) {
+	if (secs <= le32_to_cpu(btree->u.external[i].file_secno)) {
 		hpfs_error(s, "there is an allocation error in file %08x, sector %08x", f, secs);
 		if (i) i--;
 	}
-	else if (btree->u.external[i].file_secno + btree->u.external[i].length > secs) {
-		hpfs_free_sectors(s, btree->u.external[i].disk_secno + secs -
-			btree->u.external[i].file_secno, btree->u.external[i].length
-			- secs + btree->u.external[i].file_secno); /* I hope gcc optimizes this :-) */
-		btree->u.external[i].length = secs - btree->u.external[i].file_secno;
+	else if (le32_to_cpu(btree->u.external[i].file_secno) + le32_to_cpu(btree->u.external[i].length) > secs) {
+		hpfs_free_sectors(s, le32_to_cpu(btree->u.external[i].disk_secno) + secs -
+			le32_to_cpu(btree->u.external[i].file_secno), le32_to_cpu(btree->u.external[i].length)
+			- secs + le32_to_cpu(btree->u.external[i].file_secno)); /* I hope gcc optimizes this :-) */
+		btree->u.external[i].length = cpu_to_le32(secs - le32_to_cpu(btree->u.external[i].file_secno));
 	}
 	for (j = i + 1; j < btree->n_used_nodes; j++)
-		hpfs_free_sectors(s, btree->u.external[j].disk_secno, btree->u.external[j].length);
+		hpfs_free_sectors(s, le32_to_cpu(btree->u.external[j].disk_secno), le32_to_cpu(btree->u.external[j].length));
 	btree->n_used_nodes = i + 1;
 	btree->n_free_nodes = nodes - btree->n_used_nodes;
-	btree->first_free = 8 + 12 * btree->n_used_nodes;
+	btree->first_free = cpu_to_le16(8 + 12 * btree->n_used_nodes);
 	mark_buffer_dirty(bh);
 	brelse(bh);
 }
@@ -480,12 +480,12 @@ void hpfs_remove_fnode(struct super_block *s, fnode_secno fno)
 	struct extended_attribute *ea_end;
 	if (!(fnode = hpfs_map_fnode(s, fno, &bh))) return;
 	if (!fnode->dirflag) hpfs_remove_btree(s, &fnode->btree);
-	else hpfs_remove_dtree(s, fnode->u.external[0].disk_secno);
+	else hpfs_remove_dtree(s, le32_to_cpu(fnode->u.external[0].disk_secno));
 	ea_end = fnode_end_ea(fnode);
 	for (ea = fnode_ea(fnode); ea < ea_end; ea = next_ea(ea))
 		if (ea->indirect)
 			hpfs_ea_remove(s, ea_sec(ea), ea->anode, ea_len(ea));
-	hpfs_ea_ext_remove(s, fnode->ea_secno, fnode->ea_anode, fnode->ea_size_l);
+	hpfs_ea_ext_remove(s, le32_to_cpu(fnode->ea_secno), fnode->ea_anode, le32_to_cpu(fnode->ea_size_l));
 	brelse(bh);
 	hpfs_free_sectors(s, fno, 1);
 }
diff --git a/fs/hpfs/buffer.c b/fs/hpfs/buffer.c
index 793cb9d943d..9ecde27d1e2 100644
--- a/fs/hpfs/buffer.c
+++ b/fs/hpfs/buffer.c
@@ -9,22 +9,6 @@
 #include <linux/slab.h>
 #include "hpfs_fn.h"
 
-void hpfs_lock_creation(struct super_block *s)
-{
-#ifdef DEBUG_LOCKS
-	printk("lock creation\n");
-#endif
-	mutex_lock(&hpfs_sb(s)->hpfs_creation_de);
-}
-
-void hpfs_unlock_creation(struct super_block *s)
-{
-#ifdef DEBUG_LOCKS
-	printk("unlock creation\n");
-#endif
-	mutex_unlock(&hpfs_sb(s)->hpfs_creation_de);
-}
-
 /* Map a sector into a buffer and return pointers to it and to the buffer. */
 
 void *hpfs_map_sector(struct super_block *s, unsigned secno, struct buffer_head **bhp,
@@ -32,6 +16,8 @@ void *hpfs_map_sector(struct super_block *s, unsigned secno, struct buffer_head
 {
 	struct buffer_head *bh;
 
+	hpfs_lock_assert(s);
+
 	cond_resched();
 
 	*bhp = bh = sb_bread(s, secno);
@@ -50,6 +36,8 @@ void *hpfs_get_sector(struct super_block *s, unsigned secno, struct buffer_head
 	struct buffer_head *bh;
 	/*return hpfs_map_sector(s, secno, bhp, 0);*/
 
+	hpfs_lock_assert(s);
+
 	cond_resched();
 
 	if ((*bhp = bh = sb_getblk(s, secno)) != NULL) {
@@ -70,6 +58,8 @@ void *hpfs_map_4sectors(struct super_block *s, unsigned secno, struct quad_buffe
 	struct buffer_head *bh;
 	char *data;
 
+	hpfs_lock_assert(s);
+
 	cond_resched();
 
 	if (secno & 3) {
@@ -125,6 +115,8 @@ void *hpfs_get_4sectors(struct super_block *s, unsigned secno,
 {
 	cond_resched();
 
+	hpfs_lock_assert(s);
+
 	if (secno & 3) {
 		printk("HPFS: hpfs_get_4sectors: unaligned read\n");
 		return NULL;
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index b3d7c0ddb60..f46ae025bfb 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -88,9 +88,9 @@ static int hpfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 			hpfs_error(inode->i_sb, "not a directory, fnode %08lx",
 					(unsigned long)inode->i_ino);
 		}
-		if (hpfs_inode->i_dno != fno->u.external[0].disk_secno) {
+		if (hpfs_inode->i_dno != le32_to_cpu(fno->u.external[0].disk_secno)) {
 			e = 1;
-			hpfs_error(inode->i_sb, "corrupted inode: i_dno == %08x, fnode -> dnode == %08x", hpfs_inode->i_dno, fno->u.external[0].disk_secno);
+			hpfs_error(inode->i_sb, "corrupted inode: i_dno == %08x, fnode -> dnode == %08x", hpfs_inode->i_dno, le32_to_cpu(fno->u.external[0].disk_secno));
 		}
 		brelse(bh);
 		if (e) {
@@ -156,7 +156,7 @@ static int hpfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 			goto again;
 		}
 		tempname = hpfs_translate_name(inode->i_sb, de->name, de->namelen, lc, de->not_8x3);
-		if (filldir(dirent, tempname, de->namelen, old_pos, de->fnode, DT_UNKNOWN) < 0) {
+		if (filldir(dirent, tempname, de->namelen, old_pos, le32_to_cpu(de->fnode), DT_UNKNOWN) < 0) {
 			filp->f_pos = old_pos;
 			if (tempname != de->name) kfree(tempname);
 			hpfs_brelse4(&qbh);
@@ -221,7 +221,7 @@ struct dentry *hpfs_lookup(struct inode *dir, struct dentry *dentry, struct name
 	 * Get inode number, what we're after.
 	 */
 
-	ino = de->fnode;
+	ino = le32_to_cpu(de->fnode);
 
 	/*
 	 * Go find or make an inode.
@@ -236,7 +236,7 @@ struct dentry *hpfs_lookup(struct inode *dir, struct dentry *dentry, struct name
 		hpfs_init_inode(result);
 		if (de->directory)
 			hpfs_read_inode(result);
-		else if (de->ea_size && hpfs_sb(dir->i_sb)->sb_eas)
+		else if (le32_to_cpu(de->ea_size) && hpfs_sb(dir->i_sb)->sb_eas)
 			hpfs_read_inode(result);
 		else {
 			result->i_mode |= S_IFREG;
@@ -250,8 +250,6 @@ struct dentry *hpfs_lookup(struct inode *dir, struct dentry *dentry, struct name
 	hpfs_result = hpfs_i(result);
 	if (!de->directory) hpfs_result->i_parent_dir = dir->i_ino;
 
-	hpfs_decide_conv(result, name, len);
-
 	if (de->has_acl || de->has_xtd_perm) if (!(dir->i_sb->s_flags & MS_RDONLY)) {
 		hpfs_error(result->i_sb, "ACLs or XPERM found. This is probably HPFS386. This driver doesn't support it now. Send me some info on these structures");
 		goto bail1;
@@ -263,19 +261,19 @@ struct dentry *hpfs_lookup(struct inode *dir, struct dentry *dentry, struct name
 	 */
 
 	if (!result->i_ctime.tv_sec) {
-		if (!(result->i_ctime.tv_sec = local_to_gmt(dir->i_sb, de->creation_date)))
+		if (!(result->i_ctime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(de->creation_date))))
 			result->i_ctime.tv_sec = 1;
 		result->i_ctime.tv_nsec = 0;
-		result->i_mtime.tv_sec = local_to_gmt(dir->i_sb, de->write_date);
+		result->i_mtime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(de->write_date));
 		result->i_mtime.tv_nsec = 0;
-		result->i_atime.tv_sec = local_to_gmt(dir->i_sb, de->read_date);
+		result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(de->read_date));
 		result->i_atime.tv_nsec = 0;
-		hpfs_result->i_ea_size = de->ea_size;
+		hpfs_result->i_ea_size = le32_to_cpu(de->ea_size);
 		if (!hpfs_result->i_ea_mode && de->read_only)
 			result->i_mode &= ~0222;
 		if (!de->directory) {
 			if (result->i_size == -1) {
-				result->i_size = de->file_size;
+				result->i_size = le32_to_cpu(de->file_size);
 				result->i_data.a_ops = &hpfs_aops;
 				hpfs_i(result)->mmu_private = result->i_size;
 			/*
diff --git a/fs/hpfs/dnode.c b/fs/hpfs/dnode.c
index 9b2ffadfc8c..1e0e2ac30fd 100644
--- a/fs/hpfs/dnode.c
+++ b/fs/hpfs/dnode.c
@@ -14,11 +14,11 @@ static loff_t get_pos(struct dnode *d, struct hpfs_dirent *fde)
 	struct hpfs_dirent *de_end = dnode_end_de(d);
 	int i = 1;
 	for (de = dnode_first_de(d); de < de_end; de = de_next_de(de)) {
-		if (de == fde) return ((loff_t) d->self << 4) | (loff_t)i;
+		if (de == fde) return ((loff_t) le32_to_cpu(d->self) << 4) | (loff_t)i;
 		i++;
 	}
 	printk("HPFS: get_pos: not_found\n");
-	return ((loff_t)d->self << 4) | (loff_t)1;
+	return ((loff_t)le32_to_cpu(d->self) << 4) | (loff_t)1;
 }
 
 void hpfs_add_pos(struct inode *inode, loff_t *pos)
@@ -130,29 +130,30 @@ static void set_last_pointer(struct super_block *s, struct dnode *d, dnode_secno
 {
 	struct hpfs_dirent *de;
 	if (!(de = dnode_last_de(d))) {
-		hpfs_error(s, "set_last_pointer: empty dnode %08x", d->self);
+		hpfs_error(s, "set_last_pointer: empty dnode %08x", le32_to_cpu(d->self));
 		return;
 	}
 	if (hpfs_sb(s)->sb_chk) {
 		if (de->down) {
 			hpfs_error(s, "set_last_pointer: dnode %08x has already last pointer %08x",
-				d->self, de_down_pointer(de));
+				le32_to_cpu(d->self), de_down_pointer(de));
 			return;
 		}
-		if (de->length != 32) {
-			hpfs_error(s, "set_last_pointer: bad last dirent in dnode %08x", d->self);
+		if (le16_to_cpu(de->length) != 32) {
+			hpfs_error(s, "set_last_pointer: bad last dirent in dnode %08x", le32_to_cpu(d->self));
 			return;
 		}
 	}
 	if (ptr) {
-		if ((d->first_free += 4) > 2048) {
-			hpfs_error(s,"set_last_pointer: too long dnode %08x", d->self);
-			d->first_free -= 4;
+		d->first_free = cpu_to_le32(le32_to_cpu(d->first_free) + 4);
+		if (le32_to_cpu(d->first_free) > 2048) {
+			hpfs_error(s, "set_last_pointer: too long dnode %08x", le32_to_cpu(d->self));
+			d->first_free = cpu_to_le32(le32_to_cpu(d->first_free) - 4);
 			return;
 		}
-		de->length = 36;
+		de->length = cpu_to_le16(36);
 		de->down = 1;
-		*(dnode_secno *)((char *)de + 32) = ptr;
+		*(dnode_secno *)((char *)de + 32) = cpu_to_le32(ptr);
 	}
 }
 
@@ -168,7 +169,7 @@ struct hpfs_dirent *hpfs_add_de(struct super_block *s, struct dnode *d,
 	for (de = dnode_first_de(d); de < de_end; de = de_next_de(de)) {
 		int c = hpfs_compare_names(s, name, namelen, de->name, de->namelen, de->last);
 		if (!c) {
-			hpfs_error(s, "name (%c,%d) already exists in dnode %08x", *name, namelen, d->self);
+			hpfs_error(s, "name (%c,%d) already exists in dnode %08x", *name, namelen, le32_to_cpu(d->self));
 			return NULL;
 		}
 		if (c < 0) break;
@@ -176,15 +177,14 @@ struct hpfs_dirent *hpfs_add_de(struct super_block *s, struct dnode *d,
 	memmove((char *)de + d_size, de, (char *)de_end - (char *)de);
 	memset(de, 0, d_size);
 	if (down_ptr) {
-		*(int *)((char *)de + d_size - 4) = down_ptr;
+		*(dnode_secno *)((char *)de + d_size - 4) = cpu_to_le32(down_ptr);
 		de->down = 1;
 	}
-	de->length = d_size;
-	if (down_ptr) de->down = 1;
+	de->length = cpu_to_le16(d_size);
 	de->not_8x3 = hpfs_is_name_long(name, namelen);
 	de->namelen = namelen;
 	memcpy(de->name, name, namelen);
-	d->first_free += d_size;
+	d->first_free = cpu_to_le32(le32_to_cpu(d->first_free) + d_size);
 	return de;
 }
 
@@ -194,25 +194,25 @@ static void hpfs_delete_de(struct super_block *s, struct dnode *d,
 			   struct hpfs_dirent *de)
 {
 	if (de->last) {
-		hpfs_error(s, "attempt to delete last dirent in dnode %08x", d->self);
+		hpfs_error(s, "attempt to delete last dirent in dnode %08x", le32_to_cpu(d->self));
 		return;
 	}
-	d->first_free -= de->length;
-	memmove(de, de_next_de(de), d->first_free + (char *)d - (char *)de);
+	d->first_free = cpu_to_le32(le32_to_cpu(d->first_free) - le16_to_cpu(de->length));
+	memmove(de, de_next_de(de), le32_to_cpu(d->first_free) + (char *)d - (char *)de);
 }
 
 static void fix_up_ptrs(struct super_block *s, struct dnode *d)
 {
 	struct hpfs_dirent *de;
 	struct hpfs_dirent *de_end = dnode_end_de(d);
-	dnode_secno dno = d->self;
+	dnode_secno dno = le32_to_cpu(d->self);
 	for (de = dnode_first_de(d); de < de_end; de = de_next_de(de))
 		if (de->down) {
 			struct quad_buffer_head qbh;
 			struct dnode *dd;
 			if ((dd = hpfs_map_dnode(s, de_down_pointer(de), &qbh))) {
-				if (dd->up != dno || dd->root_dnode) {
-					dd->up = dno;
+				if (le32_to_cpu(dd->up) != dno || dd->root_dnode) {
+					dd->up = cpu_to_le32(dno);
 					dd->root_dnode = 0;
 					hpfs_mark_4buffers_dirty(&qbh);
 				}
@@ -262,7 +262,7 @@ static int hpfs_add_to_dnode(struct inode *i, dnode_secno dno,
 			kfree(nname);
 			return 1;
 		}
-	if (d->first_free + de_size(namelen, down_ptr) <= 2048) {
+	if (le32_to_cpu(d->first_free) + de_size(namelen, down_ptr) <= 2048) {
 		loff_t t;
 		copy_de(de=hpfs_add_de(i->i_sb, d, name, namelen, down_ptr), new_de);
 		t = get_pos(d, de);
@@ -286,11 +286,11 @@ static int hpfs_add_to_dnode(struct inode *i, dnode_secno dno,
 		kfree(nname);
 		return 1;
 	}	
-	memcpy(nd, d, d->first_free);
+	memcpy(nd, d, le32_to_cpu(d->first_free));
 	copy_de(de = hpfs_add_de(i->i_sb, nd, name, namelen, down_ptr), new_de);
 	for_all_poss(i, hpfs_pos_ins, get_pos(nd, de), 1);
 	h = ((char *)dnode_last_de(nd) - (char *)nd) / 2 + 10;
-	if (!(ad = hpfs_alloc_dnode(i->i_sb, d->up, &adno, &qbh1, 0))) {
+	if (!(ad = hpfs_alloc_dnode(i->i_sb, le32_to_cpu(d->up), &adno, &qbh1))) {
 		hpfs_error(i->i_sb, "unable to alloc dnode - dnode tree will be corrupted");
 		hpfs_brelse4(&qbh);
 		kfree(nd);
@@ -313,20 +313,21 @@ static int hpfs_add_to_dnode(struct inode *i, dnode_secno dno,
 	down_ptr = adno;
 	set_last_pointer(i->i_sb, ad, de->down ? de_down_pointer(de) : 0);
 	de = de_next_de(de);
-	memmove((char *)nd + 20, de, nd->first_free + (char *)nd - (char *)de);
-	nd->first_free -= (char *)de - (char *)nd - 20;
-	memcpy(d, nd, nd->first_free);
+	memmove((char *)nd + 20, de, le32_to_cpu(nd->first_free) + (char *)nd - (char *)de);
+	nd->first_free = cpu_to_le32(le32_to_cpu(nd->first_free) - ((char *)de - (char *)nd - 20));
+	memcpy(d, nd, le32_to_cpu(nd->first_free));
 	for_all_poss(i, hpfs_pos_del, (loff_t)dno << 4, pos);
 	fix_up_ptrs(i->i_sb, ad);
 	if (!d->root_dnode) {
-		dno = ad->up = d->up;
+		ad->up = d->up;
+		dno = le32_to_cpu(ad->up);
 		hpfs_mark_4buffers_dirty(&qbh);
 		hpfs_brelse4(&qbh);
 		hpfs_mark_4buffers_dirty(&qbh1);
 		hpfs_brelse4(&qbh1);
 		goto go_up;
 	}
-	if (!(rd = hpfs_alloc_dnode(i->i_sb, d->up, &rdno, &qbh2, 0))) {
+	if (!(rd = hpfs_alloc_dnode(i->i_sb, le32_to_cpu(d->up), &rdno, &qbh2))) {
 		hpfs_error(i->i_sb, "unable to alloc dnode - dnode tree will be corrupted");
 		hpfs_brelse4(&qbh);
 		hpfs_brelse4(&qbh1);
@@ -338,7 +339,7 @@ static int hpfs_add_to_dnode(struct inode *i, dnode_secno dno,
 	i->i_blocks += 4;
 	rd->root_dnode = 1;
 	rd->up = d->up;
-	if (!(fnode = hpfs_map_fnode(i->i_sb, d->up, &bh))) {
+	if (!(fnode = hpfs_map_fnode(i->i_sb, le32_to_cpu(d->up), &bh))) {
 		hpfs_free_dnode(i->i_sb, rdno);
 		hpfs_brelse4(&qbh);
 		hpfs_brelse4(&qbh1);
@@ -347,10 +348,11 @@ static int hpfs_add_to_dnode(struct inode *i, dnode_secno dno,
 		kfree(nname);
 		return 1;
 	}
-	fnode->u.external[0].disk_secno = rdno;
+	fnode->u.external[0].disk_secno = cpu_to_le32(rdno);
 	mark_buffer_dirty(bh);
 	brelse(bh);
-	d->up = ad->up = hpfs_i(i)->i_dno = rdno;
+	hpfs_i(i)->i_dno = rdno;
+	d->up = ad->up = cpu_to_le32(rdno);
 	d->root_dnode = ad->root_dnode = 0;
 	hpfs_mark_4buffers_dirty(&qbh);
 	hpfs_brelse4(&qbh);
@@ -373,7 +375,7 @@ static int hpfs_add_to_dnode(struct inode *i, dnode_secno dno,
 
 int hpfs_add_dirent(struct inode *i,
 		    const unsigned char *name, unsigned namelen,
-		    struct hpfs_dirent *new_de, int cdepth)
+		    struct hpfs_dirent *new_de)
 {
 	struct hpfs_inode_info *hpfs_inode = hpfs_i(i);
 	struct dnode *d;
@@ -403,7 +405,6 @@ int hpfs_add_dirent(struct inode *i,
 		}
 	}
 	hpfs_brelse4(&qbh);
-	if (!cdepth) hpfs_lock_creation(i->i_sb);
 	if (hpfs_check_free_dnodes(i->i_sb, FREE_DNODES_ADD)) {
 		c = 1;
 		goto ret;
@@ -411,7 +412,6 @@ int hpfs_add_dirent(struct inode *i,
 	i->i_version++;
 	c = hpfs_add_to_dnode(i, dno, name, namelen, new_de, 0);
 	ret:
-	if (!cdepth) hpfs_unlock_creation(i->i_sb);
 	return c;
 }
 
@@ -437,9 +437,9 @@ static secno move_to_top(struct inode *i, dnode_secno from, dnode_secno to)
 				return 0;
 		if (!(dnode = hpfs_map_dnode(i->i_sb, dno, &qbh))) return 0;
 		if (hpfs_sb(i->i_sb)->sb_chk) {
-			if (dnode->up != chk_up) {
+			if (le32_to_cpu(dnode->up) != chk_up) {
 				hpfs_error(i->i_sb, "move_to_top: up pointer from %08x should be %08x, is %08x",
-					dno, chk_up, dnode->up);
+					dno, chk_up, le32_to_cpu(dnode->up));
 				hpfs_brelse4(&qbh);
 				return 0;
 			}
@@ -455,7 +455,7 @@ static secno move_to_top(struct inode *i, dnode_secno from, dnode_secno to)
 		hpfs_brelse4(&qbh);
 	}
 	while (!(de = dnode_pre_last_de(dnode))) {
-		dnode_secno up = dnode->up;
+		dnode_secno up = le32_to_cpu(dnode->up);
 		hpfs_brelse4(&qbh);
 		hpfs_free_dnode(i->i_sb, dno);
 		i->i_size -= 2048;
@@ -474,8 +474,8 @@ static secno move_to_top(struct inode *i, dnode_secno from, dnode_secno to)
 			hpfs_brelse4(&qbh);
 			return 0;
 		}
-		dnode->first_free -= 4;
-		de->length -= 4;
+		dnode->first_free = cpu_to_le32(le32_to_cpu(dnode->first_free) - 4);
+		de->length = cpu_to_le16(le16_to_cpu(de->length) - 4);
 		de->down = 0;
 		hpfs_mark_4buffers_dirty(&qbh);
 		dno = up;
@@ -483,12 +483,12 @@ static secno move_to_top(struct inode *i, dnode_secno from, dnode_secno to)
 	t = get_pos(dnode, de);
 	for_all_poss(i, hpfs_pos_subst, t, 4);
 	for_all_poss(i, hpfs_pos_subst, t + 1, 5);
-	if (!(nde = kmalloc(de->length, GFP_NOFS))) {
+	if (!(nde = kmalloc(le16_to_cpu(de->length), GFP_NOFS))) {
 		hpfs_error(i->i_sb, "out of memory for dirent - directory will be corrupted");
 		hpfs_brelse4(&qbh);
 		return 0;
 	}
-	memcpy(nde, de, de->length);
+	memcpy(nde, de, le16_to_cpu(de->length));
 	ddno = de->down ? de_down_pointer(de) : 0;
 	hpfs_delete_de(i->i_sb, dnode, de);
 	set_last_pointer(i->i_sb, dnode, ddno);
@@ -517,11 +517,11 @@ static void delete_empty_dnode(struct inode *i, dnode_secno dno)
 	try_it_again:
 	if (hpfs_stop_cycles(i->i_sb, dno, &c1, &c2, "delete_empty_dnode")) return;
 	if (!(dnode = hpfs_map_dnode(i->i_sb, dno, &qbh))) return;
-	if (dnode->first_free > 56) goto end;
-	if (dnode->first_free == 52 || dnode->first_free == 56) {
+	if (le32_to_cpu(dnode->first_free) > 56) goto end;
+	if (le32_to_cpu(dnode->first_free) == 52 || le32_to_cpu(dnode->first_free) == 56) {
 		struct hpfs_dirent *de_end;
 		int root = dnode->root_dnode;
-		up = dnode->up;
+		up = le32_to_cpu(dnode->up);
 		de = dnode_first_de(dnode);
 		down = de->down ? de_down_pointer(de) : 0;
 		if (hpfs_sb(i->i_sb)->sb_chk) if (root && !down) {
@@ -545,13 +545,13 @@ static void delete_empty_dnode(struct inode *i, dnode_secno dno)
 				return;
 			    }
 			if ((d1 = hpfs_map_dnode(i->i_sb, down, &qbh1))) {
-				d1->up = up;
+				d1->up = cpu_to_le32(up);
 				d1->root_dnode = 1;
 				hpfs_mark_4buffers_dirty(&qbh1);
 				hpfs_brelse4(&qbh1);
 			}
 			if ((fnode = hpfs_map_fnode(i->i_sb, up, &bh))) {
-				fnode->u.external[0].disk_secno = down;
+				fnode->u.external[0].disk_secno = cpu_to_le32(down);
 				mark_buffer_dirty(bh);
 				brelse(bh);
 			}
@@ -570,22 +570,22 @@ static void delete_empty_dnode(struct inode *i, dnode_secno dno)
 		for_all_poss(i, hpfs_pos_subst, ((loff_t)dno << 4) | 1, ((loff_t)up << 4) | p);
 		if (!down) {
 			de->down = 0;
-			de->length -= 4;
-			dnode->first_free -= 4;
+			de->length = cpu_to_le16(le16_to_cpu(de->length) - 4);
+			dnode->first_free = cpu_to_le32(le32_to_cpu(dnode->first_free) - 4);
 			memmove(de_next_de(de), (char *)de_next_de(de) + 4,
-				(char *)dnode + dnode->first_free - (char *)de_next_de(de));
+				(char *)dnode + le32_to_cpu(dnode->first_free) - (char *)de_next_de(de));
 		} else {
 			struct dnode *d1;
 			struct quad_buffer_head qbh1;
-			*(dnode_secno *) ((void *) de + de->length - 4) = down;
+			*(dnode_secno *) ((void *) de + le16_to_cpu(de->length) - 4) = down;
 			if ((d1 = hpfs_map_dnode(i->i_sb, down, &qbh1))) {
-				d1->up = up;
+				d1->up = cpu_to_le32(up);
 				hpfs_mark_4buffers_dirty(&qbh1);
 				hpfs_brelse4(&qbh1);
 			}
 		}
 	} else {
-		hpfs_error(i->i_sb, "delete_empty_dnode: dnode %08x, first_free == %03x", dno, dnode->first_free);
+		hpfs_error(i->i_sb, "delete_empty_dnode: dnode %08x, first_free == %03x", dno, le32_to_cpu(dnode->first_free));
 		goto end;
 	}
 
@@ -596,18 +596,18 @@ static void delete_empty_dnode(struct inode *i, dnode_secno dno)
 		struct quad_buffer_head qbh1;
 		if (!de_next->down) goto endm;
 		ndown = de_down_pointer(de_next);
-		if (!(de_cp = kmalloc(de->length, GFP_NOFS))) {
+		if (!(de_cp = kmalloc(le16_to_cpu(de->length), GFP_NOFS))) {
 			printk("HPFS: out of memory for dtree balancing\n");
 			goto endm;
 		}
-		memcpy(de_cp, de, de->length);
+		memcpy(de_cp, de, le16_to_cpu(de->length));
 		hpfs_delete_de(i->i_sb, dnode, de);
 		hpfs_mark_4buffers_dirty(&qbh);
 		hpfs_brelse4(&qbh);
 		for_all_poss(i, hpfs_pos_subst, ((loff_t)up << 4) | p, 4);
 		for_all_poss(i, hpfs_pos_del, ((loff_t)up << 4) | p, 1);
 		if (de_cp->down) if ((d1 = hpfs_map_dnode(i->i_sb, de_down_pointer(de_cp), &qbh1))) {
-			d1->up = ndown;
+			d1->up = cpu_to_le32(ndown);
 			hpfs_mark_4buffers_dirty(&qbh1);
 			hpfs_brelse4(&qbh1);
 		}
@@ -635,7 +635,7 @@ static void delete_empty_dnode(struct inode *i, dnode_secno dno)
 			struct hpfs_dirent *del = dnode_last_de(d1);
 			dlp = del->down ? de_down_pointer(del) : 0;
 			if (!dlp && down) {
-				if (d1->first_free > 2044) {
+				if (le32_to_cpu(d1->first_free) > 2044) {
 					if (hpfs_sb(i->i_sb)->sb_chk >= 2) {
 						printk("HPFS: warning: unbalanced dnode tree, see hpfs.txt 4 more info\n");
 						printk("HPFS: warning: terminating balancing operation\n");
@@ -647,38 +647,38 @@ static void delete_empty_dnode(struct inode *i, dnode_secno dno)
 					printk("HPFS: warning: unbalanced dnode tree, see hpfs.txt 4 more info\n");
 					printk("HPFS: warning: goin'on\n");
 				}
-				del->length += 4;
+				del->length = cpu_to_le16(le16_to_cpu(del->length) + 4);
 				del->down = 1;
-				d1->first_free += 4;
+				d1->first_free = cpu_to_le32(le32_to_cpu(d1->first_free) + 4);
 			}
 			if (dlp && !down) {
-				del->length -= 4;
+				del->length = cpu_to_le16(le16_to_cpu(del->length) - 4);
 				del->down = 0;
-				d1->first_free -= 4;
+				d1->first_free = cpu_to_le32(le32_to_cpu(d1->first_free) - 4);
 			} else if (down)
-				*(dnode_secno *) ((void *) del + del->length - 4) = down;
+				*(dnode_secno *) ((void *) del + le16_to_cpu(del->length) - 4) = cpu_to_le32(down);
 		} else goto endm;
-		if (!(de_cp = kmalloc(de_prev->length, GFP_NOFS))) {
+		if (!(de_cp = kmalloc(le16_to_cpu(de_prev->length), GFP_NOFS))) {
 			printk("HPFS: out of memory for dtree balancing\n");
 			hpfs_brelse4(&qbh1);
 			goto endm;
 		}
 		hpfs_mark_4buffers_dirty(&qbh1);
 		hpfs_brelse4(&qbh1);
-		memcpy(de_cp, de_prev, de_prev->length);
+		memcpy(de_cp, de_prev, le16_to_cpu(de_prev->length));
 		hpfs_delete_de(i->i_sb, dnode, de_prev);
 		if (!de_prev->down) {
-			de_prev->length += 4;
+			de_prev->length = cpu_to_le16(le16_to_cpu(de_prev->length) + 4);
 			de_prev->down = 1;
-			dnode->first_free += 4;
+			dnode->first_free = cpu_to_le32(le32_to_cpu(dnode->first_free) + 4);
 		}
-		*(dnode_secno *) ((void *) de_prev + de_prev->length - 4) = ndown;
+		*(dnode_secno *) ((void *) de_prev + le16_to_cpu(de_prev->length) - 4) = cpu_to_le32(ndown);
 		hpfs_mark_4buffers_dirty(&qbh);
 		hpfs_brelse4(&qbh);
 		for_all_poss(i, hpfs_pos_subst, ((loff_t)up << 4) | (p - 1), 4);
 		for_all_poss(i, hpfs_pos_subst, ((loff_t)up << 4) | p, ((loff_t)up << 4) | (p - 1));
 		if (down) if ((d1 = hpfs_map_dnode(i->i_sb, de_down_pointer(de), &qbh1))) {
-			d1->up = ndown;
+			d1->up = cpu_to_le32(ndown);
 			hpfs_mark_4buffers_dirty(&qbh1);
 			hpfs_brelse4(&qbh1);
 		}
@@ -701,7 +701,6 @@ int hpfs_remove_dirent(struct inode *i, dnode_secno dno, struct hpfs_dirent *de,
 {
 	struct dnode *dnode = qbh->data;
 	dnode_secno down = 0;
-	int lock = 0;
 	loff_t t;
 	if (de->first || de->last) {
 		hpfs_error(i->i_sb, "hpfs_remove_dirent: attempt to delete first or last dirent in dnode %08x", dno);
@@ -710,11 +709,8 @@ int hpfs_remove_dirent(struct inode *i, dnode_secno dno, struct hpfs_dirent *de,
 	}
 	if (de->down) down = de_down_pointer(de);
 	if (depth && (de->down || (de == dnode_first_de(dnode) && de_next_de(de)->last))) {
-		lock = 1;
-		hpfs_lock_creation(i->i_sb);
 		if (hpfs_check_free_dnodes(i->i_sb, FREE_DNODES_DEL)) {
 			hpfs_brelse4(qbh);
-			hpfs_unlock_creation(i->i_sb);
 			return 2;
 		}
 	}
@@ -727,11 +723,9 @@ int hpfs_remove_dirent(struct inode *i, dnode_secno dno, struct hpfs_dirent *de,
 		dnode_secno a = move_to_top(i, down, dno);
 		for_all_poss(i, hpfs_pos_subst, 5, t);
 		if (a) delete_empty_dnode(i, a);
-		if (lock) hpfs_unlock_creation(i->i_sb);
 		return !a;
 	}
 	delete_empty_dnode(i, dno);
-	if (lock) hpfs_unlock_creation(i->i_sb);
 	return 0;
 }
 
@@ -751,8 +745,8 @@ void hpfs_count_dnodes(struct super_block *s, dnode_secno dno, int *n_dnodes,
 	ptr = 0;
 	go_up:
 	if (!(dnode = hpfs_map_dnode(s, dno, &qbh))) return;
-	if (hpfs_sb(s)->sb_chk) if (odno && odno != -1 && dnode->up != odno)
-		hpfs_error(s, "hpfs_count_dnodes: bad up pointer; dnode %08x, down %08x points to %08x", odno, dno, dnode->up);
+	if (hpfs_sb(s)->sb_chk) if (odno && odno != -1 && le32_to_cpu(dnode->up) != odno)
+		hpfs_error(s, "hpfs_count_dnodes: bad up pointer; dnode %08x, down %08x points to %08x", odno, dno, le32_to_cpu(dnode->up));
 	de = dnode_first_de(dnode);
 	if (ptr) while(1) {
 		if (de->down) if (de_down_pointer(de) == ptr) goto process_de;
@@ -776,7 +770,7 @@ void hpfs_count_dnodes(struct super_block *s, dnode_secno dno, int *n_dnodes,
 	if (!de->first && !de->last && n_items) (*n_items)++;
 	if ((de = de_next_de(de)) < dnode_end_de(dnode)) goto next_de;
 	ptr = dno;
-	dno = dnode->up;
+	dno = le32_to_cpu(dnode->up);
 	if (dnode->root_dnode) {
 		hpfs_brelse4(&qbh);
 		return;
@@ -824,8 +818,8 @@ dnode_secno hpfs_de_as_down_as_possible(struct super_block *s, dnode_secno dno)
 			return d;
 	if (!(de = map_nth_dirent(s, d, 1, &qbh, NULL))) return dno;
 	if (hpfs_sb(s)->sb_chk)
-		if (up && ((struct dnode *)qbh.data)->up != up)
-			hpfs_error(s, "hpfs_de_as_down_as_possible: bad up pointer; dnode %08x, down %08x points to %08x", up, d, ((struct dnode *)qbh.data)->up);
+		if (up && le32_to_cpu(((struct dnode *)qbh.data)->up) != up)
+			hpfs_error(s, "hpfs_de_as_down_as_possible: bad up pointer; dnode %08x, down %08x points to %08x", up, d, le32_to_cpu(((struct dnode *)qbh.data)->up));
 	if (!de->down) {
 		hpfs_brelse4(&qbh);
 		return d;
@@ -874,7 +868,7 @@ struct hpfs_dirent *map_pos_dirent(struct inode *inode, loff_t *posp,
 	/* Going up */
 	if (dnode->root_dnode) goto bail;
 
-	if (!(up_dnode = hpfs_map_dnode(inode->i_sb, dnode->up, &qbh0)))
+	if (!(up_dnode = hpfs_map_dnode(inode->i_sb, le32_to_cpu(dnode->up), &qbh0)))
 		goto bail;
 
 	end_up_de = dnode_end_de(up_dnode);
@@ -882,16 +876,16 @@ struct hpfs_dirent *map_pos_dirent(struct inode *inode, loff_t *posp,
 	for (up_de = dnode_first_de(up_dnode); up_de < end_up_de;
 	     up_de = de_next_de(up_de)) {
 		if (!(++c & 077)) hpfs_error(inode->i_sb,
-			"map_pos_dirent: pos crossed dnode boundary; dnode = %08x", dnode->up);
+			"map_pos_dirent: pos crossed dnode boundary; dnode = %08x", le32_to_cpu(dnode->up));
 		if (up_de->down && de_down_pointer(up_de) == dno) {
-			*posp = ((loff_t) dnode->up << 4) + c;
+			*posp = ((loff_t) le32_to_cpu(dnode->up) << 4) + c;
 			hpfs_brelse4(&qbh0);
 			return de;
 		}
 	}
 	
 	hpfs_error(inode->i_sb, "map_pos_dirent: pointer to dnode %08x not found in parent dnode %08x",
-		dno, dnode->up);
+		dno, le32_to_cpu(dnode->up));
 	hpfs_brelse4(&qbh0);
 	
 	bail:
@@ -1017,17 +1011,17 @@ struct hpfs_dirent *map_fnode_dirent(struct super_block *s, fnode_secno fno,
 		/*name2[15] = 0xff;*/
 		name1len = 15; name2len = 256;
 	}
-	if (!(upf = hpfs_map_fnode(s, f->up, &bh))) {
+	if (!(upf = hpfs_map_fnode(s, le32_to_cpu(f->up), &bh))) {
 		kfree(name2);
 		return NULL;
 	}	
 	if (!upf->dirflag) {
 		brelse(bh);
-		hpfs_error(s, "fnode %08x has non-directory parent %08x", fno, f->up);
+		hpfs_error(s, "fnode %08x has non-directory parent %08x", fno, le32_to_cpu(f->up));
 		kfree(name2);
 		return NULL;
 	}
-	dno = upf->u.external[0].disk_secno;
+	dno = le32_to_cpu(upf->u.external[0].disk_secno);
 	brelse(bh);
 	go_down:
 	downd = 0;
@@ -1049,7 +1043,7 @@ struct hpfs_dirent *map_fnode_dirent(struct super_block *s, fnode_secno fno,
 		return NULL;
 	}
 	next_de:
-	if (de->fnode == fno) {
+	if (le32_to_cpu(de->fnode) == fno) {
 		kfree(name2);
 		return de;
 	}
@@ -1065,7 +1059,7 @@ struct hpfs_dirent *map_fnode_dirent(struct super_block *s, fnode_secno fno,
 		goto go_down;
 	}
 	f:
-	if (de->fnode == fno) {
+	if (le32_to_cpu(de->fnode) == fno) {
 		kfree(name2);
 		return de;
 	}
@@ -1074,7 +1068,7 @@ struct hpfs_dirent *map_fnode_dirent(struct super_block *s, fnode_secno fno,
 	if ((de = de_next_de(de)) < de_end) goto next_de;
 	if (d->root_dnode) goto not_found;
 	downd = dno;
-	dno = d->up;
+	dno = le32_to_cpu(d->up);
 	hpfs_brelse4(qbh);
 	if (hpfs_sb(s)->sb_chk)
 		if (hpfs_stop_cycles(s, downd, &d1, &d2, "map_fnode_dirent #2")) {
diff --git a/fs/hpfs/ea.c b/fs/hpfs/ea.c
index 45e53d972b4..d8b84d113c8 100644
--- a/fs/hpfs/ea.c
+++ b/fs/hpfs/ea.c
@@ -24,7 +24,7 @@ void hpfs_ea_ext_remove(struct super_block *s, secno a, int ano, unsigned len)
 		}
 		if (hpfs_ea_read(s, a, ano, pos, 4, ex)) return;
 		if (ea->indirect) {
-			if (ea->valuelen != 8) {
+			if (ea_valuelen(ea) != 8) {
 				hpfs_error(s, "ea->indirect set while ea->valuelen!=8, %s %08x, pos %08x",
 					ano ? "anode" : "sectors", a, pos);
 				return;
@@ -33,7 +33,7 @@ void hpfs_ea_ext_remove(struct super_block *s, secno a, int ano, unsigned len)
 				return;
 			hpfs_ea_remove(s, ea_sec(ea), ea->anode, ea_len(ea));
 		}
-		pos += ea->namelen + ea->valuelen + 5;
+		pos += ea->namelen + ea_valuelen(ea) + 5;
 	}
 	if (!ano) hpfs_free_sectors(s, a, (len+511) >> 9);
 	else {
@@ -76,24 +76,24 @@ int hpfs_read_ea(struct super_block *s, struct fnode *fnode, char *key,
 	unsigned pos;
 	int ano, len;
 	secno a;
+	char ex[4 + 255 + 1 + 8];
 	struct extended_attribute *ea;
 	struct extended_attribute *ea_end = fnode_end_ea(fnode);
 	for (ea = fnode_ea(fnode); ea < ea_end; ea = next_ea(ea))
 		if (!strcmp(ea->name, key)) {
 			if (ea->indirect)
 				goto indirect;
-			if (ea->valuelen >= size)
+			if (ea_valuelen(ea) >= size)
 				return -EINVAL;
-			memcpy(buf, ea_data(ea), ea->valuelen);
-			buf[ea->valuelen] = 0;
+			memcpy(buf, ea_data(ea), ea_valuelen(ea));
+			buf[ea_valuelen(ea)] = 0;
 			return 0;
 		}
-	a = fnode->ea_secno;
-	len = fnode->ea_size_l;
+	a = le32_to_cpu(fnode->ea_secno);
+	len = le32_to_cpu(fnode->ea_size_l);
 	ano = fnode->ea_anode;
 	pos = 0;
 	while (pos < len) {
-		char ex[4 + 255 + 1 + 8];
 		ea = (struct extended_attribute *)ex;
 		if (pos + 4 > len) {
 			hpfs_error(s, "EAs don't end correctly, %s %08x, len %08x",
@@ -106,14 +106,14 @@ int hpfs_read_ea(struct super_block *s, struct fnode *fnode, char *key,
 		if (!strcmp(ea->name, key)) {
 			if (ea->indirect)
 				goto indirect;
-			if (ea->valuelen >= size)
+			if (ea_valuelen(ea) >= size)
 				return -EINVAL;
-			if (hpfs_ea_read(s, a, ano, pos + 4 + ea->namelen + 1, ea->valuelen, buf))
+			if (hpfs_ea_read(s, a, ano, pos + 4 + ea->namelen + 1, ea_valuelen(ea), buf))
 				return -EIO;
-			buf[ea->valuelen] = 0;
+			buf[ea_valuelen(ea)] = 0;
 			return 0;
 		}
-		pos += ea->namelen + ea->valuelen + 5;
+		pos += ea->namelen + ea_valuelen(ea) + 5;
 	}
 	return -ENOENT;
 indirect:
@@ -138,16 +138,16 @@ char *hpfs_get_ea(struct super_block *s, struct fnode *fnode, char *key, int *si
 		if (!strcmp(ea->name, key)) {
 			if (ea->indirect)
 				return get_indirect_ea(s, ea->anode, ea_sec(ea), *size = ea_len(ea));
-			if (!(ret = kmalloc((*size = ea->valuelen) + 1, GFP_NOFS))) {
+			if (!(ret = kmalloc((*size = ea_valuelen(ea)) + 1, GFP_NOFS))) {
 				printk("HPFS: out of memory for EA\n");
 				return NULL;
 			}
-			memcpy(ret, ea_data(ea), ea->valuelen);
-			ret[ea->valuelen] = 0;
+			memcpy(ret, ea_data(ea), ea_valuelen(ea));
+			ret[ea_valuelen(ea)] = 0;
 			return ret;
 		}
-	a = fnode->ea_secno;
-	len = fnode->ea_size_l;
+	a = le32_to_cpu(fnode->ea_secno);
+	len = le32_to_cpu(fnode->ea_size_l);
 	ano = fnode->ea_anode;
 	pos = 0;
 	while (pos < len) {
@@ -164,18 +164,18 @@ char *hpfs_get_ea(struct super_block *s, struct fnode *fnode, char *key, int *si
 		if (!strcmp(ea->name, key)) {
 			if (ea->indirect)
 				return get_indirect_ea(s, ea->anode, ea_sec(ea), *size = ea_len(ea));
-			if (!(ret = kmalloc((*size = ea->valuelen) + 1, GFP_NOFS))) {
+			if (!(ret = kmalloc((*size = ea_valuelen(ea)) + 1, GFP_NOFS))) {
 				printk("HPFS: out of memory for EA\n");
 				return NULL;
 			}
-			if (hpfs_ea_read(s, a, ano, pos + 4 + ea->namelen + 1, ea->valuelen, ret)) {
+			if (hpfs_ea_read(s, a, ano, pos + 4 + ea->namelen + 1, ea_valuelen(ea), ret)) {
 				kfree(ret);
 				return NULL;
 			}
-			ret[ea->valuelen] = 0;
+			ret[ea_valuelen(ea)] = 0;
 			return ret;
 		}
-		pos += ea->namelen + ea->valuelen + 5;
+		pos += ea->namelen + ea_valuelen(ea) + 5;
 	}
 	return NULL;
 }
@@ -202,13 +202,13 @@ void hpfs_set_ea(struct inode *inode, struct fnode *fnode, const char *key,
 			if (ea->indirect) {
 				if (ea_len(ea) == size)
 					set_indirect_ea(s, ea->anode, ea_sec(ea), data, size);
-			} else if (ea->valuelen == size) {
+			} else if (ea_valuelen(ea) == size) {
 				memcpy(ea_data(ea), data, size);
 			}
 			return;
 		}
-	a = fnode->ea_secno;
-	len = fnode->ea_size_l;
+	a = le32_to_cpu(fnode->ea_secno);
+	len = le32_to_cpu(fnode->ea_size_l);
 	ano = fnode->ea_anode;
 	pos = 0;
 	while (pos < len) {
@@ -228,68 +228,70 @@ void hpfs_set_ea(struct inode *inode, struct fnode *fnode, const char *key,
 					set_indirect_ea(s, ea->anode, ea_sec(ea), data, size);
 			}
 			else {
-				if (ea->valuelen == size)
+				if (ea_valuelen(ea) == size)
 					hpfs_ea_write(s, a, ano, pos + 4 + ea->namelen + 1, size, data);
 			}
 			return;
 		}
-		pos += ea->namelen + ea->valuelen + 5;
+		pos += ea->namelen + ea_valuelen(ea) + 5;
 	}
-	if (!fnode->ea_offs) {
-		/*if (fnode->ea_size_s) {
+	if (!le16_to_cpu(fnode->ea_offs)) {
+		/*if (le16_to_cpu(fnode->ea_size_s)) {
 			hpfs_error(s, "fnode %08x: ea_size_s == %03x, ea_offs == 0",
-				inode->i_ino, fnode->ea_size_s);
+				inode->i_ino, le16_to_cpu(fnode->ea_size_s));
 			return;
 		}*/
-		fnode->ea_offs = 0xc4;
+		fnode->ea_offs = cpu_to_le16(0xc4);
 	}
-	if (fnode->ea_offs < 0xc4 || fnode->ea_offs + fnode->acl_size_s + fnode->ea_size_s > 0x200) {
+	if (le16_to_cpu(fnode->ea_offs) < 0xc4 || le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s) + le16_to_cpu(fnode->ea_size_s) > 0x200) {
 		hpfs_error(s, "fnode %08lx: ea_offs == %03x, ea_size_s == %03x",
 			(unsigned long)inode->i_ino,
-			fnode->ea_offs, fnode->ea_size_s);
+			le32_to_cpu(fnode->ea_offs), le16_to_cpu(fnode->ea_size_s));
 		return;
 	}
-	if ((fnode->ea_size_s || !fnode->ea_size_l) &&
-	     fnode->ea_offs + fnode->acl_size_s + fnode->ea_size_s + strlen(key) + size + 5 <= 0x200) {
+	if ((le16_to_cpu(fnode->ea_size_s) || !le32_to_cpu(fnode->ea_size_l)) &&
+	     le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s) + le16_to_cpu(fnode->ea_size_s) + strlen(key) + size + 5 <= 0x200) {
 		ea = fnode_end_ea(fnode);
 		*(char *)ea = 0;
 		ea->namelen = strlen(key);
-		ea->valuelen = size;
+		ea->valuelen_lo = size;
+		ea->valuelen_hi = size >> 8;
 		strcpy(ea->name, key);
 		memcpy(ea_data(ea), data, size);
-		fnode->ea_size_s += strlen(key) + size + 5;
+		fnode->ea_size_s = cpu_to_le16(le16_to_cpu(fnode->ea_size_s) + strlen(key) + size + 5);
 		goto ret;
 	}
 	/* Most the code here is 99.9993422% unused. I hope there are no bugs.
 	   But what .. HPFS.IFS has also bugs in ea management. */
-	if (fnode->ea_size_s && !fnode->ea_size_l) {
+	if (le16_to_cpu(fnode->ea_size_s) && !le32_to_cpu(fnode->ea_size_l)) {
 		secno n;
 		struct buffer_head *bh;
 		char *data;
-		if (!(n = hpfs_alloc_sector(s, fno, 1, 0, 1))) return;
+		if (!(n = hpfs_alloc_sector(s, fno, 1, 0))) return;
 		if (!(data = hpfs_get_sector(s, n, &bh))) {
 			hpfs_free_sectors(s, n, 1);
 			return;
 		}
-		memcpy(data, fnode_ea(fnode), fnode->ea_size_s);
-		fnode->ea_size_l = fnode->ea_size_s;
-		fnode->ea_size_s = 0;
-		fnode->ea_secno = n;
-		fnode->ea_anode = 0;
+		memcpy(data, fnode_ea(fnode), le16_to_cpu(fnode->ea_size_s));
+		fnode->ea_size_l = cpu_to_le32(le16_to_cpu(fnode->ea_size_s));
+		fnode->ea_size_s = cpu_to_le16(0);
+		fnode->ea_secno = cpu_to_le32(n);
+		fnode->ea_anode = cpu_to_le32(0);
 		mark_buffer_dirty(bh);
 		brelse(bh);
 	}
-	pos = fnode->ea_size_l + 5 + strlen(key) + size;
-	len = (fnode->ea_size_l + 511) >> 9;
+	pos = le32_to_cpu(fnode->ea_size_l) + 5 + strlen(key) + size;
+	len = (le32_to_cpu(fnode->ea_size_l) + 511) >> 9;
 	if (pos >= 30000) goto bail;
 	while (((pos + 511) >> 9) > len) {
 		if (!len) {
-			if (!(fnode->ea_secno = hpfs_alloc_sector(s, fno, 1, 0, 1)))
-				goto bail;
+			secno q = hpfs_alloc_sector(s, fno, 1, 0);
+			if (!q) goto bail;
+			fnode->ea_secno = cpu_to_le32(q);
 			fnode->ea_anode = 0;
 			len++;
 		} else if (!fnode->ea_anode) {
-			if (hpfs_alloc_if_possible(s, fnode->ea_secno + len)) {
+			if (hpfs_alloc_if_possible(s, le32_to_cpu(fnode->ea_secno) + len)) {
 				len++;
 			} else {
 				/* Aargh... don't know how to create ea anodes :-( */
@@ -298,26 +300,26 @@ void hpfs_set_ea(struct inode *inode, struct fnode *fnode, const char *key,
 				anode_secno a_s;
 				if (!(anode = hpfs_alloc_anode(s, fno, &a_s, &bh)))
 					goto bail;
-				anode->up = fno;
+				anode->up = cpu_to_le32(fno);
 				anode->btree.fnode_parent = 1;
 				anode->btree.n_free_nodes--;
 				anode->btree.n_used_nodes++;
-				anode->btree.first_free += 12;
-				anode->u.external[0].disk_secno = fnode->ea_secno;
-				anode->u.external[0].file_secno = 0;
-				anode->u.external[0].length = len;
+				anode->btree.first_free = cpu_to_le16(le16_to_cpu(anode->btree.first_free) + 12);
+				anode->u.external[0].disk_secno = cpu_to_le32(le32_to_cpu(fnode->ea_secno));
+				anode->u.external[0].file_secno = cpu_to_le32(0);
+				anode->u.external[0].length = cpu_to_le32(len);
 				mark_buffer_dirty(bh);
 				brelse(bh);
 				fnode->ea_anode = 1;
-				fnode->ea_secno = a_s;*/
+				fnode->ea_secno = cpu_to_le32(a_s);*/
 				secno new_sec;
 				int i;
-				if (!(new_sec = hpfs_alloc_sector(s, fno, 1, 1 - ((pos + 511) >> 9), 1)))
+				if (!(new_sec = hpfs_alloc_sector(s, fno, 1, 1 - ((pos + 511) >> 9))))
 					goto bail;
 				for (i = 0; i < len; i++) {
 					struct buffer_head *bh1, *bh2;
 					void *b1, *b2;
-					if (!(b1 = hpfs_map_sector(s, fnode->ea_secno + i, &bh1, len - i - 1))) {
+					if (!(b1 = hpfs_map_sector(s, le32_to_cpu(fnode->ea_secno) + i, &bh1, len - i - 1))) {
 						hpfs_free_sectors(s, new_sec, (pos + 511) >> 9);
 						goto bail;
 					}
@@ -331,13 +333,13 @@ void hpfs_set_ea(struct inode *inode, struct fnode *fnode, const char *key,
 					mark_buffer_dirty(bh2);
 					brelse(bh2);
 				}
-				hpfs_free_sectors(s, fnode->ea_secno, len);
-				fnode->ea_secno = new_sec;
+				hpfs_free_sectors(s, le32_to_cpu(fnode->ea_secno), len);
+				fnode->ea_secno = cpu_to_le32(new_sec);
 				len = (pos + 511) >> 9;
 			}
 		}
 		if (fnode->ea_anode) {
-			if (hpfs_add_sector_to_btree(s, fnode->ea_secno,
+			if (hpfs_add_sector_to_btree(s, le32_to_cpu(fnode->ea_secno),
 						     0, len) != -1) {
 				len++;
 			} else {
@@ -349,17 +351,17 @@ void hpfs_set_ea(struct inode *inode, struct fnode *fnode, const char *key,
 	h[1] = strlen(key);
 	h[2] = size & 0xff;
 	h[3] = size >> 8;
-	if (hpfs_ea_write(s, fnode->ea_secno, fnode->ea_anode, fnode->ea_size_l, 4, h)) goto bail;
-	if (hpfs_ea_write(s, fnode->ea_secno, fnode->ea_anode, fnode->ea_size_l + 4, h[1] + 1, key)) goto bail;
-	if (hpfs_ea_write(s, fnode->ea_secno, fnode->ea_anode, fnode->ea_size_l + 5 + h[1], size, data)) goto bail;
-	fnode->ea_size_l = pos;
+	if (hpfs_ea_write(s, le32_to_cpu(fnode->ea_secno), fnode->ea_anode, le32_to_cpu(fnode->ea_size_l), 4, h)) goto bail;
+	if (hpfs_ea_write(s, le32_to_cpu(fnode->ea_secno), fnode->ea_anode, le32_to_cpu(fnode->ea_size_l) + 4, h[1] + 1, key)) goto bail;
+	if (hpfs_ea_write(s, le32_to_cpu(fnode->ea_secno), fnode->ea_anode, le32_to_cpu(fnode->ea_size_l) + 5 + h[1], size, data)) goto bail;
+	fnode->ea_size_l = cpu_to_le32(pos);
 	ret:
 	hpfs_i(inode)->i_ea_size += 5 + strlen(key) + size;
 	return;
 	bail:
-	if (fnode->ea_secno)
-		if (fnode->ea_anode) hpfs_truncate_btree(s, fnode->ea_secno, 1, (fnode->ea_size_l + 511) >> 9);
-		else hpfs_free_sectors(s, fnode->ea_secno + ((fnode->ea_size_l + 511) >> 9), len - ((fnode->ea_size_l + 511) >> 9));
-	else fnode->ea_secno = fnode->ea_size_l = 0;
+	if (le32_to_cpu(fnode->ea_secno))
+		if (fnode->ea_anode) hpfs_truncate_btree(s, le32_to_cpu(fnode->ea_secno), 1, (le32_to_cpu(fnode->ea_size_l) + 511) >> 9);
+		else hpfs_free_sectors(s, le32_to_cpu(fnode->ea_secno) + ((le32_to_cpu(fnode->ea_size_l) + 511) >> 9), len - ((le32_to_cpu(fnode->ea_size_l) + 511) >> 9));
+	else fnode->ea_secno = fnode->ea_size_l = cpu_to_le32(0);
 }
 	
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 9b9eb6933e4..89c500ee521 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -20,8 +20,8 @@ static int hpfs_file_release(struct inode *inode, struct file *file)
 
 int hpfs_file_fsync(struct file *file, int datasync)
 {
-	/*return file_fsync(file, datasync);*/
-	return 0; /* Don't fsync :-) */
+	struct inode *inode = file->f_mapping->host;
+	return sync_blockdev(inode->i_sb->s_bdev);
 }
 
 /*
@@ -48,38 +48,46 @@ static secno hpfs_bmap(struct inode *inode, unsigned file_secno)
 static void hpfs_truncate(struct inode *i)
 {
 	if (IS_IMMUTABLE(i)) return /*-EPERM*/;
-	hpfs_lock(i->i_sb);
+	hpfs_lock_assert(i->i_sb);
+
 	hpfs_i(i)->i_n_secs = 0;
 	i->i_blocks = 1 + ((i->i_size + 511) >> 9);
 	hpfs_i(i)->mmu_private = i->i_size;
 	hpfs_truncate_btree(i->i_sb, i->i_ino, 1, ((i->i_size + 511) >> 9));
 	hpfs_write_inode(i);
 	hpfs_i(i)->i_n_secs = 0;
-	hpfs_unlock(i->i_sb);
 }
 
 static int hpfs_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create)
 {
+	int r;
 	secno s;
+	hpfs_lock(inode->i_sb);
 	s = hpfs_bmap(inode, iblock);
 	if (s) {
 		map_bh(bh_result, inode->i_sb, s);
-		return 0;
+		goto ret_0;
 	}
-	if (!create) return 0;
+	if (!create) goto ret_0;
 	if (iblock<<9 != hpfs_i(inode)->mmu_private) {
 		BUG();
-		return -EIO;
+		r = -EIO;
+		goto ret_r;
 	}
 	if ((s = hpfs_add_sector_to_btree(inode->i_sb, inode->i_ino, 1, inode->i_blocks - 1)) == -1) {
 		hpfs_truncate_btree(inode->i_sb, inode->i_ino, 1, inode->i_blocks - 1);
-		return -ENOSPC;
+		r = -ENOSPC;
+		goto ret_r;
 	}
 	inode->i_blocks++;
 	hpfs_i(inode)->mmu_private += 512;
 	set_buffer_new(bh_result);
 	map_bh(bh_result, inode->i_sb, s);
-	return 0;
+	ret_0:
+	r = 0;
+	ret_r:
+	hpfs_unlock(inode->i_sb);
+	return r;
 }
 
 static int hpfs_writepage(struct page *page, struct writeback_control *wbc)
@@ -130,8 +138,11 @@ static ssize_t hpfs_file_write(struct file *file, const char __user *buf,
 	ssize_t retval;
 
 	retval = do_sync_write(file, buf, count, ppos);
-	if (retval > 0)
+	if (retval > 0) {
+		hpfs_lock(file->f_path.dentry->d_sb);
 		hpfs_i(file->f_path.dentry->d_inode)->i_dirty = 1;
+		hpfs_unlock(file->f_path.dentry->d_sb);
+	}
 	return retval;
 }
 
diff --git a/fs/hpfs/hpfs.h b/fs/hpfs/hpfs.h
index 0e84c73cd9c..8b0650aae32 100644
--- a/fs/hpfs/hpfs.h
+++ b/fs/hpfs/hpfs.h
@@ -19,9 +19,13 @@
    For definitive information on HPFS, ask somebody else -- this is guesswork.
    There are certain to be many mistakes. */
 
+#if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN)
+#error unknown endian
+#endif
+
 /* Notation */
 
-typedef unsigned secno;			/* sector number, partition relative */
+typedef u32 secno;			/* sector number, partition relative */
 
 typedef secno dnode_secno;		/* sector number of a dnode */
 typedef secno fnode_secno;		/* sector number of an fnode */
@@ -38,28 +42,28 @@ typedef u32 time32_t;		/* 32-bit time_t type */
 
 struct hpfs_boot_block
 {
-  unsigned char jmp[3];
-  unsigned char oem_id[8];
-  unsigned char bytes_per_sector[2];	/* 512 */
-  unsigned char sectors_per_cluster;
-  unsigned char n_reserved_sectors[2];
-  unsigned char n_fats;
-  unsigned char n_rootdir_entries[2];
-  unsigned char n_sectors_s[2];
-  unsigned char media_byte;
-  unsigned short sectors_per_fat;
-  unsigned short sectors_per_track;
-  unsigned short heads_per_cyl;
-  unsigned int n_hidden_sectors;
-  unsigned int n_sectors_l;		/* size of partition */
-  unsigned char drive_number;
-  unsigned char mbz;
-  unsigned char sig_28h;		/* 28h */
-  unsigned char vol_serno[4];
-  unsigned char vol_label[11];
-  unsigned char sig_hpfs[8];		/* "HPFS    " */
-  unsigned char pad[448];
-  unsigned short magic;			/* aa55 */
+  u8 jmp[3];
+  u8 oem_id[8];
+  u8 bytes_per_sector[2];	/* 512 */
+  u8 sectors_per_cluster;
+  u8 n_reserved_sectors[2];
+  u8 n_fats;
+  u8 n_rootdir_entries[2];
+  u8 n_sectors_s[2];
+  u8 media_byte;
+  u16 sectors_per_fat;
+  u16 sectors_per_track;
+  u16 heads_per_cyl;
+  u32 n_hidden_sectors;
+  u32 n_sectors_l;		/* size of partition */
+  u8 drive_number;
+  u8 mbz;
+  u8 sig_28h;			/* 28h */
+  u8 vol_serno[4];
+  u8 vol_label[11];
+  u8 sig_hpfs[8];		/* "HPFS    " */
+  u8 pad[448];
+  u16 magic;			/* aa55 */
 };
 
 
@@ -71,31 +75,29 @@ struct hpfs_boot_block
 
 struct hpfs_super_block
 {
-  unsigned magic;			/* f995 e849 */
-  unsigned magic1;			/* fa53 e9c5, more magic? */
-  /*unsigned huh202;*/			/* ?? 202 = N. of B. in 1.00390625 S.*/
-  char version;				/* version of a filesystem  usually 2 */
-  char funcversion;			/* functional version - oldest version
+  u32 magic;				/* f995 e849 */
+  u32 magic1;				/* fa53 e9c5, more magic? */
+  u8 version;				/* version of a filesystem  usually 2 */
+  u8 funcversion;			/* functional version - oldest version
   					   of filesystem that can understand
 					   this disk */
-  unsigned short int zero;		/* 0 */
+  u16 zero;				/* 0 */
   fnode_secno root;			/* fnode of root directory */
   secno n_sectors;			/* size of filesystem */
-  unsigned n_badblocks;			/* number of bad blocks */
+  u32 n_badblocks;			/* number of bad blocks */
   secno bitmaps;			/* pointers to free space bit maps */
-  unsigned zero1;			/* 0 */
+  u32 zero1;				/* 0 */
   secno badblocks;			/* bad block list */
-  unsigned zero3;			/* 0 */
+  u32 zero3;				/* 0 */
   time32_t last_chkdsk;			/* date last checked, 0 if never */
-  /*unsigned zero4;*/			/* 0 */
-  time32_t last_optimize;			/* date last optimized, 0 if never */
+  time32_t last_optimize;		/* date last optimized, 0 if never */
   secno n_dir_band;			/* number of sectors in dir band */
   secno dir_band_start;			/* first sector in dir band */
   secno dir_band_end;			/* last sector in dir band */
   secno dir_band_bitmap;		/* free space map, 1 dnode per bit */
-  char volume_name[32];			/* not used */
+  u8 volume_name[32];			/* not used */
   secno user_id_table;			/* 8 preallocated sectors - user id */
-  unsigned zero6[103];			/* 0 */
+  u32 zero6[103];			/* 0 */
 };
 
 
@@ -107,44 +109,65 @@ struct hpfs_super_block
 
 struct hpfs_spare_block
 {
-  unsigned magic;			/* f991 1849 */
-  unsigned magic1;			/* fa52 29c5, more magic? */
-
-  unsigned dirty: 1;			/* 0 clean, 1 "improperly stopped" */
-  /*unsigned flag1234: 4;*/		/* unknown flags */
-  unsigned sparedir_used: 1;		/* spare dirblks used */
-  unsigned hotfixes_used: 1;		/* hotfixes used */
-  unsigned bad_sector: 1;		/* bad sector, corrupted disk (???) */
-  unsigned bad_bitmap: 1;		/* bad bitmap */
-  unsigned fast: 1;			/* partition was fast formatted */
-  unsigned old_wrote: 1;		/* old version wrote to partion */
-  unsigned old_wrote_1: 1;		/* old version wrote to partion (?) */
-  unsigned install_dasd_limits: 1;	/* HPFS386 flags */
-  unsigned resynch_dasd_limits: 1;
-  unsigned dasd_limits_operational: 1;
-  unsigned multimedia_active: 1;
-  unsigned dce_acls_active: 1;
-  unsigned dasd_limits_dirty: 1;
-  unsigned flag67: 2;
-  unsigned char mm_contlgulty;
-  unsigned char unused;
+  u32 magic;				/* f991 1849 */
+  u32 magic1;				/* fa52 29c5, more magic? */
+
+#ifdef __LITTLE_ENDIAN
+  u8 dirty: 1;				/* 0 clean, 1 "improperly stopped" */
+  u8 sparedir_used: 1;			/* spare dirblks used */
+  u8 hotfixes_used: 1;			/* hotfixes used */
+  u8 bad_sector: 1;			/* bad sector, corrupted disk (???) */
+  u8 bad_bitmap: 1;			/* bad bitmap */
+  u8 fast: 1;				/* partition was fast formatted */
+  u8 old_wrote: 1;			/* old version wrote to partion */
+  u8 old_wrote_1: 1;			/* old version wrote to partion (?) */
+#else
+  u8 old_wrote_1: 1;			/* old version wrote to partion (?) */
+  u8 old_wrote: 1;			/* old version wrote to partion */
+  u8 fast: 1;				/* partition was fast formatted */
+  u8 bad_bitmap: 1;			/* bad bitmap */
+  u8 bad_sector: 1;			/* bad sector, corrupted disk (???) */
+  u8 hotfixes_used: 1;			/* hotfixes used */
+  u8 sparedir_used: 1;			/* spare dirblks used */
+  u8 dirty: 1;				/* 0 clean, 1 "improperly stopped" */
+#endif
+
+#ifdef __LITTLE_ENDIAN
+  u8 install_dasd_limits: 1;		/* HPFS386 flags */
+  u8 resynch_dasd_limits: 1;
+  u8 dasd_limits_operational: 1;
+  u8 multimedia_active: 1;
+  u8 dce_acls_active: 1;
+  u8 dasd_limits_dirty: 1;
+  u8 flag67: 2;
+#else
+  u8 flag67: 2;
+  u8 dasd_limits_dirty: 1;
+  u8 dce_acls_active: 1;
+  u8 multimedia_active: 1;
+  u8 dasd_limits_operational: 1;
+  u8 resynch_dasd_limits: 1;
+  u8 install_dasd_limits: 1;		/* HPFS386 flags */
+#endif
+
+  u8 mm_contlgulty;
+  u8 unused;
 
   secno hotfix_map;			/* info about remapped bad sectors */
-  unsigned n_spares_used;		/* number of hotfixes */
-  unsigned n_spares;			/* number of spares in hotfix map */
-  unsigned n_dnode_spares_free;		/* spare dnodes unused */
-  unsigned n_dnode_spares;		/* length of spare_dnodes[] list,
+  u32 n_spares_used;			/* number of hotfixes */
+  u32 n_spares;				/* number of spares in hotfix map */
+  u32 n_dnode_spares_free;		/* spare dnodes unused */
+  u32 n_dnode_spares;			/* length of spare_dnodes[] list,
 					   follows in this block*/
   secno code_page_dir;			/* code page directory block */
-  unsigned n_code_pages;		/* number of code pages */
-  /*unsigned large_numbers[2];*/	/* ?? */
-  unsigned super_crc;			/* on HPFS386 and LAN Server this is
+  u32 n_code_pages;			/* number of code pages */
+  u32 super_crc;			/* on HPFS386 and LAN Server this is
   					   checksum of superblock, on normal
 					   OS/2 unused */
-  unsigned spare_crc;			/* on HPFS386 checksum of spareblock */
-  unsigned zero1[15];			/* unused */
+  u32 spare_crc;			/* on HPFS386 checksum of spareblock */
+  u32 zero1[15];			/* unused */
   dnode_secno spare_dnodes[100];	/* emergency free dnode list */
-  unsigned zero2[1];			/* room for more? */
+  u32 zero2[1];				/* room for more? */
 };
 
 /* The bad block list is 4 sectors long.  The first word must be zero,
@@ -179,18 +202,18 @@ struct hpfs_spare_block
 
 struct code_page_directory
 {
-  unsigned magic;			/* 4945 21f7 */
-  unsigned n_code_pages;		/* number of pointers following */
-  unsigned zero1[2];
+  u32 magic;				/* 4945 21f7 */
+  u32 n_code_pages;			/* number of pointers following */
+  u32 zero1[2];
   struct {
-    unsigned short ix;			/* index */
-    unsigned short code_page_number;	/* code page number */
-    unsigned bounds;			/* matches corresponding word
+    u16 ix;				/* index */
+    u16 code_page_number;		/* code page number */
+    u32 bounds;				/* matches corresponding word
 					   in data block */
     secno code_page_data;		/* sector number of a code_page_data
 					   containing c.p. array */
-    unsigned short index;		/* index in c.p. array in that sector*/
-    unsigned short unknown;		/* some unknown value; usually 0;
+    u16 index;				/* index in c.p. array in that sector*/
+    u16 unknown;			/* some unknown value; usually 0;
     					   2 in Japanese version */
   } array[31];				/* unknown length */
 };
@@ -201,21 +224,21 @@ struct code_page_directory
 
 struct code_page_data
 {
-  unsigned magic;			/* 8945 21f7 */
-  unsigned n_used;			/* # elements used in c_p_data[] */
-  unsigned bounds[3];			/* looks a bit like
+  u32 magic;				/* 8945 21f7 */
+  u32 n_used;				/* # elements used in c_p_data[] */
+  u32 bounds[3];			/* looks a bit like
 					     (beg1,end1), (beg2,end2)
 					   one byte each */
-  unsigned short offs[3];		/* offsets from start of sector
+  u16 offs[3];				/* offsets from start of sector
 					   to start of c_p_data[ix] */
   struct {
-    unsigned short ix;			/* index */
-    unsigned short code_page_number;	/* code page number */
-    unsigned short unknown;		/* the same as in cp directory */
-    unsigned char map[128];		/* upcase table for chars 80..ff */
-    unsigned short zero2;
+    u16 ix;				/* index */
+    u16 code_page_number;		/* code page number */
+    u16 unknown;			/* the same as in cp directory */
+    u8 map[128];			/* upcase table for chars 80..ff */
+    u16 zero2;
   } code_page[3];
-  unsigned char incognita[78];
+  u8 incognita[78];
 };
 
 
@@ -255,50 +278,84 @@ struct code_page_data
 #define DNODE_MAGIC   0x77e40aae
 
 struct dnode {
-  unsigned magic;			/* 77e4 0aae */
-  unsigned first_free;			/* offset from start of dnode to
+  u32 magic;				/* 77e4 0aae */
+  u32 first_free;			/* offset from start of dnode to
 					   first free dir entry */
-  unsigned root_dnode:1;		/* Is it root dnode? */
-  unsigned increment_me:31;		/* some kind of activity counter?
-					   Neither HPFS.IFS nor CHKDSK cares
+#ifdef __LITTLE_ENDIAN
+  u8 root_dnode: 1;			/* Is it root dnode? */
+  u8 increment_me: 7;			/* some kind of activity counter? */
+					/* Neither HPFS.IFS nor CHKDSK cares
+					   if you change this word */
+#else
+  u8 increment_me: 7;			/* some kind of activity counter? */
+					/* Neither HPFS.IFS nor CHKDSK cares
 					   if you change this word */
+  u8 root_dnode: 1;			/* Is it root dnode? */
+#endif
+  u8 increment_me2[3];
   secno up;				/* (root dnode) directory's fnode
 					   (nonroot) parent dnode */
   dnode_secno self;			/* pointer to this dnode */
-  unsigned char dirent[2028];		/* one or more dirents */
+  u8 dirent[2028];			/* one or more dirents */
 };
 
 struct hpfs_dirent {
-  unsigned short length;		/* offset to next dirent */
-  unsigned first: 1;			/* set on phony ^A^A (".") entry */
-  unsigned has_acl: 1;
-  unsigned down: 1;			/* down pointer present (after name) */
-  unsigned last: 1;			/* set on phony \377 entry */
-  unsigned has_ea: 1;			/* entry has EA */
-  unsigned has_xtd_perm: 1;		/* has extended perm list (???) */
-  unsigned has_explicit_acl: 1;
-  unsigned has_needea: 1;		/* ?? some EA has NEEDEA set
+  u16 length;				/* offset to next dirent */
+
+#ifdef __LITTLE_ENDIAN
+  u8 first: 1;				/* set on phony ^A^A (".") entry */
+  u8 has_acl: 1;
+  u8 down: 1;				/* down pointer present (after name) */
+  u8 last: 1;				/* set on phony \377 entry */
+  u8 has_ea: 1;				/* entry has EA */
+  u8 has_xtd_perm: 1;			/* has extended perm list (???) */
+  u8 has_explicit_acl: 1;
+  u8 has_needea: 1;			/* ?? some EA has NEEDEA set
+					   I have no idea why this is
+					   interesting in a dir entry */
+#else
+  u8 has_needea: 1;			/* ?? some EA has NEEDEA set
 					   I have no idea why this is
 					   interesting in a dir entry */
-  unsigned read_only: 1;		/* dos attrib */
-  unsigned hidden: 1;			/* dos attrib */
-  unsigned system: 1;			/* dos attrib */
-  unsigned flag11: 1;			/* would be volume label dos attrib */
-  unsigned directory: 1;		/* dos attrib */
-  unsigned archive: 1;			/* dos attrib */
-  unsigned not_8x3: 1;			/* name is not 8.3 */
-  unsigned flag15: 1;
+  u8 has_explicit_acl: 1;
+  u8 has_xtd_perm: 1;			/* has extended perm list (???) */
+  u8 has_ea: 1;				/* entry has EA */
+  u8 last: 1;				/* set on phony \377 entry */
+  u8 down: 1;				/* down pointer present (after name) */
+  u8 has_acl: 1;
+  u8 first: 1;				/* set on phony ^A^A (".") entry */
+#endif
+
+#ifdef __LITTLE_ENDIAN
+  u8 read_only: 1;			/* dos attrib */
+  u8 hidden: 1;				/* dos attrib */
+  u8 system: 1;				/* dos attrib */
+  u8 flag11: 1;				/* would be volume label dos attrib */
+  u8 directory: 1;			/* dos attrib */
+  u8 archive: 1;			/* dos attrib */
+  u8 not_8x3: 1;			/* name is not 8.3 */
+  u8 flag15: 1;
+#else
+  u8 flag15: 1;
+  u8 not_8x3: 1;			/* name is not 8.3 */
+  u8 archive: 1;			/* dos attrib */
+  u8 directory: 1;			/* dos attrib */
+  u8 flag11: 1;				/* would be volume label dos attrib */
+  u8 system: 1;				/* dos attrib */
+  u8 hidden: 1;				/* dos attrib */
+  u8 read_only: 1;			/* dos attrib */
+#endif
+
   fnode_secno fnode;			/* fnode giving allocation info */
   time32_t write_date;			/* mtime */
-  unsigned file_size;			/* file length, bytes */
+  u32 file_size;			/* file length, bytes */
   time32_t read_date;			/* atime */
   time32_t creation_date;			/* ctime */
-  unsigned ea_size;			/* total EA length, bytes */
-  unsigned char no_of_acls : 3;		/* number of ACL's */
-  unsigned char reserver : 5;
-  unsigned char ix;			/* code page index (of filename), see
+  u32 ea_size;				/* total EA length, bytes */
+  u8 no_of_acls;			/* number of ACL's (low 3 bits) */
+  u8 ix;				/* code page index (of filename), see
 					   struct code_page_data */
-  unsigned char namelen, name[1];	/* file name */
+  u8 namelen, name[1];			/* file name */
   /* dnode_secno down;	  btree down pointer, if present,
      			  follows name on next word boundary, or maybe it
 			  precedes next dirent, which is on a word boundary. */
@@ -318,38 +375,50 @@ struct hpfs_dirent {
 
 struct bplus_leaf_node
 {
-  unsigned file_secno;			/* first file sector in extent */
-  unsigned length;			/* length, sectors */
+  u32 file_secno;			/* first file sector in extent */
+  u32 length;				/* length, sectors */
   secno disk_secno;			/* first corresponding disk sector */
 };
 
 struct bplus_internal_node
 {
-  unsigned file_secno;			/* subtree maps sectors < this  */
+  u32 file_secno;			/* subtree maps sectors < this  */
   anode_secno down;			/* pointer to subtree */
 };
 
 struct bplus_header
 {
-  unsigned hbff: 1;	/* high bit of first free entry offset */
-  unsigned flag1: 1;
-  unsigned flag2: 1;
-  unsigned flag3: 1;
-  unsigned flag4: 1;
-  unsigned fnode_parent: 1;		/* ? we're pointed to by an fnode,
+#ifdef __LITTLE_ENDIAN
+  u8 hbff: 1;			/* high bit of first free entry offset */
+  u8 flag1234: 4;
+  u8 fnode_parent: 1;			/* ? we're pointed to by an fnode,
 					   the data btree or some ea or the
 					   main ea bootage pointer ea_secno */
 					/* also can get set in fnodes, which
 					   may be a chkdsk glitch or may mean
 					   this bit is irrelevant in fnodes,
 					   or this interpretation is all wet */
-  unsigned binary_search: 1;		/* suggest binary search (unused) */
-  unsigned internal: 1;			/* 1 -> (internal) tree of anodes
+  u8 binary_search: 1;			/* suggest binary search (unused) */
+  u8 internal: 1;			/* 1 -> (internal) tree of anodes
+					   0 -> (leaf) list of extents */
+#else
+  u8 internal: 1;			/* 1 -> (internal) tree of anodes
 					   0 -> (leaf) list of extents */
-  unsigned char fill[3];
-  unsigned char n_free_nodes;		/* free nodes in following array */
-  unsigned char n_used_nodes;		/* used nodes in following array */
-  unsigned short first_free;		/* offset from start of header to
+  u8 binary_search: 1;			/* suggest binary search (unused) */
+  u8 fnode_parent: 1;			/* ? we're pointed to by an fnode,
+					   the data btree or some ea or the
+					   main ea bootage pointer ea_secno */
+					/* also can get set in fnodes, which
+					   may be a chkdsk glitch or may mean
+					   this bit is irrelevant in fnodes,
+					   or this interpretation is all wet */
+  u8 flag1234: 4;
+  u8 hbff: 1;			/* high bit of first free entry offset */
+#endif
+  u8 fill[3];
+  u8 n_free_nodes;			/* free nodes in following array */
+  u8 n_used_nodes;			/* used nodes in following array */
+  u16 first_free;			/* offset from start of header to
 					   first free node in array */
   union {
     struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
@@ -369,37 +438,38 @@ struct bplus_header
 
 struct fnode
 {
-  unsigned magic;			/* f7e4 0aae */
-  unsigned zero1[2];			/* read history */
-  unsigned char len, name[15];		/* true length, truncated name */
+  u32 magic;				/* f7e4 0aae */
+  u32 zero1[2];				/* read history */
+  u8 len, name[15];			/* true length, truncated name */
   fnode_secno up;			/* pointer to file's directory fnode */
-  /*unsigned zero2[3];*/
   secno acl_size_l;
   secno acl_secno;
-  unsigned short acl_size_s;
-  char acl_anode;
-  char zero2;				/* history bit count */
-  unsigned ea_size_l;			/* length of disk-resident ea's */
+  u16 acl_size_s;
+  u8 acl_anode;
+  u8 zero2;				/* history bit count */
+  u32 ea_size_l;			/* length of disk-resident ea's */
   secno ea_secno;			/* first sector of disk-resident ea's*/
-  unsigned short ea_size_s;		/* length of fnode-resident ea's */
-
-  unsigned flag0: 1;
-  unsigned ea_anode: 1;			/* 1 -> ea_secno is an anode */
-  unsigned flag2: 1;
-  unsigned flag3: 1;
-  unsigned flag4: 1;
-  unsigned flag5: 1;
-  unsigned flag6: 1;
-  unsigned flag7: 1;
-  unsigned dirflag: 1;			/* 1 -> directory.  first & only extent
+  u16 ea_size_s;			/* length of fnode-resident ea's */
+
+#ifdef __LITTLE_ENDIAN
+  u8 flag0: 1;
+  u8 ea_anode: 1;			/* 1 -> ea_secno is an anode */
+  u8 flag234567: 6;
+#else
+  u8 flag234567: 6;
+  u8 ea_anode: 1;			/* 1 -> ea_secno is an anode */
+  u8 flag0: 1;
+#endif
+
+#ifdef __LITTLE_ENDIAN
+  u8 dirflag: 1;			/* 1 -> directory.  first & only extent
 					   points to dnode. */
-  unsigned flag9: 1;
-  unsigned flag10: 1;
-  unsigned flag11: 1;
-  unsigned flag12: 1;
-  unsigned flag13: 1;
-  unsigned flag14: 1;
-  unsigned flag15: 1;
+  u8 flag9012345: 7;
+#else
+  u8 flag9012345: 7;
+  u8 dirflag: 1;			/* 1 -> directory.  first & only extent
+					   points to dnode. */
+#endif
 
   struct bplus_header btree;		/* b+ tree, 8 extents or 12 subtrees */
   union {
@@ -407,17 +477,16 @@ struct fnode
     struct bplus_internal_node internal[12];
   } u;
 
-  unsigned file_size;			/* file length, bytes */
-  unsigned n_needea;			/* number of EA's with NEEDEA set */
-  char user_id[16];			/* unused */
-  unsigned short ea_offs;		/* offset from start of fnode
+  u32 file_size;			/* file length, bytes */
+  u32 n_needea;				/* number of EA's with NEEDEA set */
+  u8 user_id[16];			/* unused */
+  u16 ea_offs;				/* offset from start of fnode
 					   to first fnode-resident ea */
-  char dasd_limit_treshhold;
-  char dasd_limit_delta;
-  unsigned dasd_limit;
-  unsigned dasd_usage;
-  /*unsigned zero5[2];*/
-  unsigned char ea[316];		/* zero or more EA's, packed together
+  u8 dasd_limit_treshhold;
+  u8 dasd_limit_delta;
+  u32 dasd_limit;
+  u32 dasd_usage;
+  u8 ea[316];				/* zero or more EA's, packed together
 					   with no alignment padding.
 					   (Do not use this name, get here
 					   via fnode + ea_offs. I think.) */
@@ -430,7 +499,7 @@ struct fnode
 
 struct anode
 {
-  unsigned magic;			/* 37e4 0aae */
+  u32 magic;				/* 37e4 0aae */
   anode_secno self;			/* pointer to this anode */
   secno up;				/* parent anode or fnode */
 
@@ -440,7 +509,7 @@ struct anode
     struct bplus_internal_node internal[60];
   } u;
 
-  unsigned fill[3];			/* unused */
+  u32 fill[3];				/* unused */
 };
 
 
@@ -461,25 +530,31 @@ struct anode
 
 struct extended_attribute
 {
-  unsigned indirect: 1;			/* 1 -> value gives sector number
+#ifdef __LITTLE_ENDIAN
+  u8 indirect: 1;			/* 1 -> value gives sector number
 					   where real value starts */
-  unsigned anode: 1;			/* 1 -> sector is an anode
+  u8 anode: 1;				/* 1 -> sector is an anode
+					   that points to fragmented value */
+  u8 flag23456: 5;
+  u8 needea: 1;				/* required ea */
+#else
+  u8 needea: 1;				/* required ea */
+  u8 flag23456: 5;
+  u8 anode: 1;				/* 1 -> sector is an anode
 					   that points to fragmented value */
-  unsigned flag2: 1;
-  unsigned flag3: 1;
-  unsigned flag4: 1;
-  unsigned flag5: 1;
-  unsigned flag6: 1;
-  unsigned needea: 1;			/* required ea */
-  unsigned char namelen;		/* length of name, bytes */
-  unsigned short valuelen;		/* length of value, bytes */
-  unsigned char name[0];
+  u8 indirect: 1;			/* 1 -> value gives sector number
+					   where real value starts */
+#endif
+  u8 namelen;				/* length of name, bytes */
+  u8 valuelen_lo;			/* length of value, bytes */
+  u8 valuelen_hi;			/* length of value, bytes */
+  u8 name[0];
   /*
-    unsigned char name[namelen];	ascii attrib name
-    unsigned char nul;			terminating '\0', not counted
-    unsigned char value[valuelen];	value, arbitrary
+    u8 name[namelen];			ascii attrib name
+    u8 nul;				terminating '\0', not counted
+    u8 value[valuelen];			value, arbitrary
       if this.indirect, valuelen is 8 and the value is
-        unsigned length;		real length of value, bytes
+        u32 length;			real length of value, bytes
         secno secno;			sector address where it starts
       if this.anode, the above sector number is the root of an anode tree
         which points to the value.
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index c15adbca07f..dd552f862c8 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -13,6 +13,7 @@
 #include <linux/pagemap.h>
 #include <linux/buffer_head.h>
 #include <linux/slab.h>
+#include <asm/unaligned.h>
 
 #include "hpfs.h"
 
@@ -51,18 +52,16 @@ struct hpfs_inode_info {
 	unsigned i_disk_sec;	/* (files) minimalist cache of alloc info */
 	unsigned i_n_secs;	/* (files) minimalist cache of alloc info */
 	unsigned i_ea_size;	/* size of extended attributes */
-	unsigned i_conv : 2;	/* (files) crlf->newline hackery */
 	unsigned i_ea_mode : 1;	/* file's permission is stored in ea */
 	unsigned i_ea_uid : 1;	/* file's uid is stored in ea */
 	unsigned i_ea_gid : 1;	/* file's gid is stored in ea */
 	unsigned i_dirty : 1;
-	struct mutex i_mutex;
-	struct mutex i_parent_mutex;
 	loff_t **i_rddir_off;
 	struct inode vfs_inode;
 };
 
 struct hpfs_sb_info {
+	struct mutex hpfs_mutex;	/* global hpfs lock */
 	ino_t sb_root;			/* inode number of root dir */
 	unsigned sb_fs_size;		/* file system size, sectors */
 	unsigned sb_bitmaps;		/* sector number of bitmap list */
@@ -74,7 +73,6 @@ struct hpfs_sb_info {
 	uid_t sb_uid;			/* uid from mount options */
 	gid_t sb_gid;			/* gid from mount options */
 	umode_t sb_mode;		/* mode from mount options */
-	unsigned sb_conv : 2;		/* crlf->newline hackery */
 	unsigned sb_eas : 2;		/* eas: 0-ignore, 1-ro, 2-rw */
 	unsigned sb_err : 2;		/* on errs: 0-cont, 1-ro, 2-panic */
 	unsigned sb_chk : 2;		/* checks: 0-no, 1-normal, 2-strict */
@@ -87,20 +85,9 @@ struct hpfs_sb_info {
 	unsigned *sb_bmp_dir;		/* main bitmap directory */
 	unsigned sb_c_bitmap;		/* current bitmap */
 	unsigned sb_max_fwd_alloc;	/* max forwad allocation */
-	struct mutex hpfs_creation_de;	/* when creating dirents, nobody else
-					   can alloc blocks */
-	/*unsigned sb_mounting : 1;*/
 	int sb_timeshift;
 };
 
-/*
- * conv= options
- */
-
-#define CONV_BINARY 0			/* no conversion */
-#define CONV_TEXT 1			/* crlf->newline */
-#define CONV_AUTO 2			/* decide based on file contents */
-
 /* Four 512-byte buffers and the 2k block obtained by concatenating them */
 
 struct quad_buffer_head {
@@ -113,7 +100,7 @@ struct quad_buffer_head {
 static inline dnode_secno de_down_pointer (struct hpfs_dirent *de)
 {
   CHKCOND(de->down,("HPFS: de_down_pointer: !de->down\n"));
-  return *(dnode_secno *) ((void *) de + de->length - 4);
+  return le32_to_cpu(*(dnode_secno *) ((void *) de + le16_to_cpu(de->length) - 4));
 }
 
 /* The first dir entry in a dnode */
@@ -127,41 +114,46 @@ static inline struct hpfs_dirent *dnode_first_de (struct dnode *dnode)
 
 static inline struct hpfs_dirent *dnode_end_de (struct dnode *dnode)
 {
-  CHKCOND(dnode->first_free>=0x14 && dnode->first_free<=0xa00,("HPFS: dnode_end_de: dnode->first_free = %d\n",(int)dnode->first_free));
-  return (void *) dnode + dnode->first_free;
+  CHKCOND(le32_to_cpu(dnode->first_free)>=0x14 && le32_to_cpu(dnode->first_free)<=0xa00,("HPFS: dnode_end_de: dnode->first_free = %x\n",(unsigned)le32_to_cpu(dnode->first_free)));
+  return (void *) dnode + le32_to_cpu(dnode->first_free);
 }
 
 /* The dir entry after dir entry de */
 
 static inline struct hpfs_dirent *de_next_de (struct hpfs_dirent *de)
 {
-  CHKCOND(de->length>=0x20 && de->length<0x800,("HPFS: de_next_de: de->length = %d\n",(int)de->length));
-  return (void *) de + de->length;
+  CHKCOND(le16_to_cpu(de->length)>=0x20 && le16_to_cpu(de->length)<0x800,("HPFS: de_next_de: de->length = %x\n",(unsigned)le16_to_cpu(de->length)));
+  return (void *) de + le16_to_cpu(de->length);
 }
 
 static inline struct extended_attribute *fnode_ea(struct fnode *fnode)
 {
-	return (struct extended_attribute *)((char *)fnode + fnode->ea_offs + fnode->acl_size_s);
+	return (struct extended_attribute *)((char *)fnode + le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s));
 }
 
 static inline struct extended_attribute *fnode_end_ea(struct fnode *fnode)
 {
-	return (struct extended_attribute *)((char *)fnode + fnode->ea_offs + fnode->acl_size_s + fnode->ea_size_s);
+	return (struct extended_attribute *)((char *)fnode + le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s) + le16_to_cpu(fnode->ea_size_s));
+}
+
+static unsigned ea_valuelen(struct extended_attribute *ea)
+{
+	return ea->valuelen_lo + 256 * ea->valuelen_hi;
 }
 
 static inline struct extended_attribute *next_ea(struct extended_attribute *ea)
 {
-	return (struct extended_attribute *)((char *)ea + 5 + ea->namelen + ea->valuelen);
+	return (struct extended_attribute *)((char *)ea + 5 + ea->namelen + ea_valuelen(ea));
 }
 
 static inline secno ea_sec(struct extended_attribute *ea)
 {
-	return *(secno *)((char *)ea + 9 + ea->namelen);
+	return le32_to_cpu(get_unaligned((secno *)((char *)ea + 9 + ea->namelen)));
 }
 
 static inline secno ea_len(struct extended_attribute *ea)
 {
-	return *(secno *)((char *)ea + 5 + ea->namelen);
+	return le32_to_cpu(get_unaligned((secno *)((char *)ea + 5 + ea->namelen)));
 }
 
 static inline char *ea_data(struct extended_attribute *ea)
@@ -186,13 +178,13 @@ static inline void copy_de(struct hpfs_dirent *dst, struct hpfs_dirent *src)
 	dst->not_8x3 = n;
 }
 
-static inline unsigned tstbits(unsigned *bmp, unsigned b, unsigned n)
+static inline unsigned tstbits(u32 *bmp, unsigned b, unsigned n)
 {
 	int i;
 	if ((b >= 0x4000) || (b + n - 1 >= 0x4000)) return n;
-	if (!((bmp[(b & 0x3fff) >> 5] >> (b & 0x1f)) & 1)) return 1;
+	if (!((le32_to_cpu(bmp[(b & 0x3fff) >> 5]) >> (b & 0x1f)) & 1)) return 1;
 	for (i = 1; i < n; i++)
-		if (/*b+i < 0x4000 &&*/ !((bmp[((b+i) & 0x3fff) >> 5] >> ((b+i) & 0x1f)) & 1))
+		if (!((le32_to_cpu(bmp[((b+i) & 0x3fff) >> 5]) >> ((b+i) & 0x1f)) & 1))
 			return i + 1;
 	return 0;
 }
@@ -200,12 +192,12 @@ static inline unsigned tstbits(unsigned *bmp, unsigned b, unsigned n)
 /* alloc.c */
 
 int hpfs_chk_sectors(struct super_block *, secno, int, char *);
-secno hpfs_alloc_sector(struct super_block *, secno, unsigned, int, int);
+secno hpfs_alloc_sector(struct super_block *, secno, unsigned, int);
 int hpfs_alloc_if_possible(struct super_block *, secno);
 void hpfs_free_sectors(struct super_block *, secno, unsigned);
 int hpfs_check_free_dnodes(struct super_block *, int);
 void hpfs_free_dnode(struct super_block *, secno);
-struct dnode *hpfs_alloc_dnode(struct super_block *, secno, dnode_secno *, struct quad_buffer_head *, int);
+struct dnode *hpfs_alloc_dnode(struct super_block *, secno, dnode_secno *, struct quad_buffer_head *);
 struct fnode *hpfs_alloc_fnode(struct super_block *, secno, fnode_secno *, struct buffer_head **);
 struct anode *hpfs_alloc_anode(struct super_block *, secno, anode_secno *, struct buffer_head **);
 
@@ -222,8 +214,6 @@ void hpfs_remove_fnode(struct super_block *, fnode_secno fno);
 
 /* buffer.c */
 
-void hpfs_lock_creation(struct super_block *);
-void hpfs_unlock_creation(struct super_block *);
 void *hpfs_map_sector(struct super_block *, unsigned, struct buffer_head **, int);
 void *hpfs_get_sector(struct super_block *, unsigned, struct buffer_head **);
 void *hpfs_map_4sectors(struct super_block *, unsigned, struct quad_buffer_head *, int);
@@ -247,7 +237,7 @@ void hpfs_del_pos(struct inode *, loff_t *);
 struct hpfs_dirent *hpfs_add_de(struct super_block *, struct dnode *,
 				const unsigned char *, unsigned, secno);
 int hpfs_add_dirent(struct inode *, const unsigned char *, unsigned,
-		    struct hpfs_dirent *, int);
+		    struct hpfs_dirent *);
 int hpfs_remove_dirent(struct inode *, dnode_secno, struct hpfs_dirent *, struct quad_buffer_head *, int);
 void hpfs_count_dnodes(struct super_block *, dnode_secno, int *, int *, int *);
 dnode_secno hpfs_de_as_down_as_possible(struct super_block *, dnode_secno dno);
@@ -303,7 +293,6 @@ int hpfs_compare_names(struct super_block *, const unsigned char *, unsigned,
 		       const unsigned char *, unsigned, int);
 int hpfs_is_name_long(const unsigned char *, unsigned);
 void hpfs_adjust_length(const unsigned char *, unsigned *);
-void hpfs_decide_conv(struct inode *, const unsigned char *, unsigned);
 
 /* namei.c */
 
@@ -346,21 +335,26 @@ static inline time32_t gmt_to_local(struct super_block *s, time_t t)
 /*
  * Locking:
  *
- * hpfs_lock() is a leftover from the big kernel lock.
- * Right now, these functions are empty and only left
- * for documentation purposes. The file system no longer
- * works on SMP systems, so the lock is not needed
- * any more.
+ * hpfs_lock() locks the whole filesystem. It must be taken
+ * on any method called by the VFS.
  *
- * If someone is interested in making it work again, this
- * would be the place to start by adding a per-superblock
- * mutex and fixing all the bugs and performance issues
- * caused by that.
+ * We don't do any per-file locking anymore, it is hard to
+ * review and HPFS is not performance-sensitive anyway.
  */
 static inline void hpfs_lock(struct super_block *s)
 {
+	struct hpfs_sb_info *sbi = hpfs_sb(s);
+	mutex_lock(&sbi->hpfs_mutex);
 }
 
 static inline void hpfs_unlock(struct super_block *s)
 {
+	struct hpfs_sb_info *sbi = hpfs_sb(s);
+	mutex_unlock(&sbi->hpfs_mutex);
+}
+
+static inline void hpfs_lock_assert(struct super_block *s)
+{
+	struct hpfs_sb_info *sbi = hpfs_sb(s);
+	WARN_ON(!mutex_is_locked(&sbi->hpfs_mutex));
 }
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 87f1f787e76..338cd836845 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -17,7 +17,6 @@ void hpfs_init_inode(struct inode *i)
 	i->i_uid = hpfs_sb(sb)->sb_uid;
 	i->i_gid = hpfs_sb(sb)->sb_gid;
 	i->i_mode = hpfs_sb(sb)->sb_mode;
-	hpfs_inode->i_conv = hpfs_sb(sb)->sb_conv;
 	i->i_size = -1;
 	i->i_blocks = -1;
 	
@@ -116,8 +115,8 @@ void hpfs_read_inode(struct inode *i)
 		i->i_mode |= S_IFDIR;
 		i->i_op = &hpfs_dir_iops;
 		i->i_fop = &hpfs_dir_ops;
-		hpfs_inode->i_parent_dir = fnode->up;
-		hpfs_inode->i_dno = fnode->u.external[0].disk_secno;
+		hpfs_inode->i_parent_dir = le32_to_cpu(fnode->up);
+		hpfs_inode->i_dno = le32_to_cpu(fnode->u.external[0].disk_secno);
 		if (hpfs_sb(sb)->sb_chk >= 2) {
 			struct buffer_head *bh0;
 			if (hpfs_map_fnode(sb, hpfs_inode->i_parent_dir, &bh0)) brelse(bh0);
@@ -133,7 +132,7 @@ void hpfs_read_inode(struct inode *i)
 		i->i_op = &hpfs_file_iops;
 		i->i_fop = &hpfs_file_ops;
 		i->i_nlink = 1;
-		i->i_size = fnode->file_size;
+		i->i_size = le32_to_cpu(fnode->file_size);
 		i->i_blocks = ((i->i_size + 511) >> 9) + 1;
 		i->i_data.a_ops = &hpfs_aops;
 		hpfs_i(i)->mmu_private = i->i_size;
@@ -144,7 +143,7 @@ void hpfs_read_inode(struct inode *i)
 static void hpfs_write_inode_ea(struct inode *i, struct fnode *fnode)
 {
 	struct hpfs_inode_info *hpfs_inode = hpfs_i(i);
-	/*if (fnode->acl_size_l || fnode->acl_size_s) {
+	/*if (le32_to_cpu(fnode->acl_size_l) || le16_to_cpu(fnode->acl_size_s)) {
 		   Some unknown structures like ACL may be in fnode,
 		   we'd better not overwrite them
 		hpfs_error(i->i_sb, "fnode %08x has some unknown HPFS386 stuctures", i->i_ino);
@@ -187,9 +186,7 @@ void hpfs_write_inode(struct inode *i)
 		kfree(hpfs_inode->i_rddir_off);
 		hpfs_inode->i_rddir_off = NULL;
 	}
-	mutex_lock(&hpfs_inode->i_parent_mutex);
 	if (!i->i_nlink) {
-		mutex_unlock(&hpfs_inode->i_parent_mutex);
 		return;
 	}
 	parent = iget_locked(i->i_sb, hpfs_inode->i_parent_dir);
@@ -200,14 +197,9 @@ void hpfs_write_inode(struct inode *i)
 			hpfs_read_inode(parent);
 			unlock_new_inode(parent);
 		}
-		mutex_lock(&hpfs_inode->i_mutex);
 		hpfs_write_inode_nolock(i);
-		mutex_unlock(&hpfs_inode->i_mutex);
 		iput(parent);
-	} else {
-		mark_inode_dirty(i);
 	}
-	mutex_unlock(&hpfs_inode->i_parent_mutex);
 }
 
 void hpfs_write_inode_nolock(struct inode *i)
@@ -226,30 +218,30 @@ void hpfs_write_inode_nolock(struct inode *i)
 		}
 	} else de = NULL;
 	if (S_ISREG(i->i_mode)) {
-		fnode->file_size = i->i_size;
-		if (de) de->file_size = i->i_size;
+		fnode->file_size = cpu_to_le32(i->i_size);
+		if (de) de->file_size = cpu_to_le32(i->i_size);
 	} else if (S_ISDIR(i->i_mode)) {
-		fnode->file_size = 0;
-		if (de) de->file_size = 0;
+		fnode->file_size = cpu_to_le32(0);
+		if (de) de->file_size = cpu_to_le32(0);
 	}
 	hpfs_write_inode_ea(i, fnode);
 	if (de) {
-		de->write_date = gmt_to_local(i->i_sb, i->i_mtime.tv_sec);
-		de->read_date = gmt_to_local(i->i_sb, i->i_atime.tv_sec);
-		de->creation_date = gmt_to_local(i->i_sb, i->i_ctime.tv_sec);
+		de->write_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_mtime.tv_sec));
+		de->read_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_atime.tv_sec));
+		de->creation_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_ctime.tv_sec));
 		de->read_only = !(i->i_mode & 0222);
-		de->ea_size = hpfs_inode->i_ea_size;
+		de->ea_size = cpu_to_le32(hpfs_inode->i_ea_size);
 		hpfs_mark_4buffers_dirty(&qbh);
 		hpfs_brelse4(&qbh);
 	}
 	if (S_ISDIR(i->i_mode)) {
 		if ((de = map_dirent(i, hpfs_inode->i_dno, "\001\001", 2, NULL, &qbh))) {
-			de->write_date = gmt_to_local(i->i_sb, i->i_mtime.tv_sec);
-			de->read_date = gmt_to_local(i->i_sb, i->i_atime.tv_sec);
-			de->creation_date = gmt_to_local(i->i_sb, i->i_ctime.tv_sec);
+			de->write_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_mtime.tv_sec));
+			de->read_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_atime.tv_sec));
+			de->creation_date = cpu_to_le32(gmt_to_local(i->i_sb, i->i_ctime.tv_sec));
 			de->read_only = !(i->i_mode & 0222);
-			de->ea_size = /*hpfs_inode->i_ea_size*/0;
-			de->file_size = 0;
+			de->ea_size = cpu_to_le32(/*hpfs_inode->i_ea_size*/0);
+			de->file_size = cpu_to_le32(0);
 			hpfs_mark_4buffers_dirty(&qbh);
 			hpfs_brelse4(&qbh);
 		} else
@@ -269,6 +261,10 @@ int hpfs_setattr(struct dentry *dentry, struct iattr *attr)
 	hpfs_lock(inode->i_sb);
 	if (inode->i_ino == hpfs_sb(inode->i_sb)->sb_root)
 		goto out_unlock;
+	if ((attr->ia_valid & ATTR_UID) && attr->ia_uid >= 0x10000)
+		goto out_unlock;
+	if ((attr->ia_valid & ATTR_GID) && attr->ia_gid >= 0x10000)
+		goto out_unlock;
 	if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size > inode->i_size)
 		goto out_unlock;
 
@@ -284,7 +280,6 @@ int hpfs_setattr(struct dentry *dentry, struct iattr *attr)
 	}
 
 	setattr_copy(inode, attr);
-	mark_inode_dirty(inode);
 
 	hpfs_write_inode(inode);
 
diff --git a/fs/hpfs/map.c b/fs/hpfs/map.c
index 840d033ecee..a790821366a 100644
--- a/fs/hpfs/map.c
+++ b/fs/hpfs/map.c
@@ -21,7 +21,7 @@ unsigned int *hpfs_map_bitmap(struct super_block *s, unsigned bmp_block,
 		hpfs_error(s, "hpfs_map_bitmap called with bad parameter: %08x at %s", bmp_block, id);
 		return NULL;
 	}
-	sec = hpfs_sb(s)->sb_bmp_dir[bmp_block];
+	sec = le32_to_cpu(hpfs_sb(s)->sb_bmp_dir[bmp_block]);
 	if (!sec || sec > hpfs_sb(s)->sb_fs_size-4) {
 		hpfs_error(s, "invalid bitmap block pointer %08x -> %08x at %s", bmp_block, sec, id);
 		return NULL;
@@ -46,18 +46,18 @@ unsigned char *hpfs_load_code_page(struct super_block *s, secno cps)
 	struct code_page_data *cpd;
 	struct code_page_directory *cp = hpfs_map_sector(s, cps, &bh, 0);
 	if (!cp) return NULL;
-	if (cp->magic != CP_DIR_MAGIC) {
-		printk("HPFS: Code page directory magic doesn't match (magic = %08x)\n", cp->magic);
+	if (le32_to_cpu(cp->magic) != CP_DIR_MAGIC) {
+		printk("HPFS: Code page directory magic doesn't match (magic = %08x)\n", le32_to_cpu(cp->magic));
 		brelse(bh);
 		return NULL;
 	}
-	if (!cp->n_code_pages) {
+	if (!le32_to_cpu(cp->n_code_pages)) {
 		printk("HPFS: n_code_pages == 0\n");
 		brelse(bh);
 		return NULL;
 	}
-	cpds = cp->array[0].code_page_data;
-	cpi = cp->array[0].index;
+	cpds = le32_to_cpu(cp->array[0].code_page_data);
+	cpi = le16_to_cpu(cp->array[0].index);
 	brelse(bh);
 
 	if (cpi >= 3) {
@@ -66,12 +66,12 @@ unsigned char *hpfs_load_code_page(struct super_block *s, secno cps)
 	}
 	
 	if (!(cpd = hpfs_map_sector(s, cpds, &bh, 0))) return NULL;
-	if ((unsigned)cpd->offs[cpi] > 0x178) {
+	if (le16_to_cpu(cpd->offs[cpi]) > 0x178) {
 		printk("HPFS: Code page index out of sector\n");
 		brelse(bh);
 		return NULL;
 	}
-	ptr = (unsigned char *)cpd + cpd->offs[cpi] + 6;
+	ptr = (unsigned char *)cpd + le16_to_cpu(cpd->offs[cpi]) + 6;
 	if (!(cp_table = kmalloc(256, GFP_KERNEL))) {
 		printk("HPFS: out of memory for code page table\n");
 		brelse(bh);
@@ -125,7 +125,7 @@ struct fnode *hpfs_map_fnode(struct super_block *s, ino_t ino, struct buffer_hea
 		if (hpfs_sb(s)->sb_chk) {
 			struct extended_attribute *ea;
 			struct extended_attribute *ea_end;
-			if (fnode->magic != FNODE_MAGIC) {
+			if (le32_to_cpu(fnode->magic) != FNODE_MAGIC) {
 				hpfs_error(s, "bad magic on fnode %08lx",
 					(unsigned long)ino);
 				goto bail;
@@ -138,7 +138,7 @@ struct fnode *hpfs_map_fnode(struct super_block *s, ino_t ino, struct buffer_hea
 					    (unsigned long)ino);
 					goto bail;
 				}
-				if (fnode->btree.first_free !=
+				if (le16_to_cpu(fnode->btree.first_free) !=
 				    8 + fnode->btree.n_used_nodes * (fnode->btree.internal ? 8 : 12)) {
 					hpfs_error(s,
 					    "bad first_free pointer in fnode %08lx",
@@ -146,12 +146,12 @@ struct fnode *hpfs_map_fnode(struct super_block *s, ino_t ino, struct buffer_hea
 					goto bail;
 				}
 			}
-			if (fnode->ea_size_s && ((signed int)fnode->ea_offs < 0xc4 ||
-			   (signed int)fnode->ea_offs + fnode->acl_size_s + fnode->ea_size_s > 0x200)) {
+			if (le16_to_cpu(fnode->ea_size_s) && (le16_to_cpu(fnode->ea_offs) < 0xc4 ||
+			   le16_to_cpu(fnode->ea_offs) + le16_to_cpu(fnode->acl_size_s) + le16_to_cpu(fnode->ea_size_s) > 0x200)) {
 				hpfs_error(s,
 					"bad EA info in fnode %08lx: ea_offs == %04x ea_size_s == %04x",
 					(unsigned long)ino,
-					fnode->ea_offs, fnode->ea_size_s);
+					le16_to_cpu(fnode->ea_offs), le16_to_cpu(fnode->ea_size_s));
 				goto bail;
 			}
 			ea = fnode_ea(fnode);
@@ -178,16 +178,20 @@ struct anode *hpfs_map_anode(struct super_block *s, anode_secno ano, struct buff
 	if (hpfs_sb(s)->sb_chk) if (hpfs_chk_sectors(s, ano, 1, "anode")) return NULL;
 	if ((anode = hpfs_map_sector(s, ano, bhp, ANODE_RD_AHEAD)))
 		if (hpfs_sb(s)->sb_chk) {
-			if (anode->magic != ANODE_MAGIC || anode->self != ano) {
+			if (le32_to_cpu(anode->magic) != ANODE_MAGIC) {
 				hpfs_error(s, "bad magic on anode %08x", ano);
 				goto bail;
 			}
+			if (le32_to_cpu(anode->self) != ano) {
+				hpfs_error(s, "self pointer invalid on anode %08x", ano);
+				goto bail;
+			}
 			if ((unsigned)anode->btree.n_used_nodes + (unsigned)anode->btree.n_free_nodes !=
 			    (anode->btree.internal ? 60 : 40)) {
 				hpfs_error(s, "bad number of nodes in anode %08x", ano);
 				goto bail;
 			}
-			if (anode->btree.first_free !=
+			if (le16_to_cpu(anode->btree.first_free) !=
 			    8 + anode->btree.n_used_nodes * (anode->btree.internal ? 8 : 12)) {
 				hpfs_error(s, "bad first_free pointer in anode %08x", ano);
 				goto bail;
@@ -219,26 +223,26 @@ struct dnode *hpfs_map_dnode(struct super_block *s, unsigned secno,
 			unsigned p, pp = 0;
 			unsigned char *d = (unsigned char *)dnode;
 			int b = 0;
-			if (dnode->magic != DNODE_MAGIC) {
+			if (le32_to_cpu(dnode->magic) != DNODE_MAGIC) {
 				hpfs_error(s, "bad magic on dnode %08x", secno);
 				goto bail;
 			}
-			if (dnode->self != secno)
-				hpfs_error(s, "bad self pointer on dnode %08x self = %08x", secno, dnode->self);
+			if (le32_to_cpu(dnode->self) != secno)
+				hpfs_error(s, "bad self pointer on dnode %08x self = %08x", secno, le32_to_cpu(dnode->self));
 			/* Check dirents - bad dirents would cause infinite
 			   loops or shooting to memory */
-			if (dnode->first_free > 2048/* || dnode->first_free < 84*/) {
-				hpfs_error(s, "dnode %08x has first_free == %08x", secno, dnode->first_free);
+			if (le32_to_cpu(dnode->first_free) > 2048) {
+				hpfs_error(s, "dnode %08x has first_free == %08x", secno, le32_to_cpu(dnode->first_free));
 				goto bail;
 			}
-			for (p = 20; p < dnode->first_free; p += d[p] + (d[p+1] << 8)) {
+			for (p = 20; p < le32_to_cpu(dnode->first_free); p += d[p] + (d[p+1] << 8)) {
 				struct hpfs_dirent *de = (struct hpfs_dirent *)((char *)dnode + p);
-				if (de->length > 292 || (de->length < 32) || (de->length & 3) || p + de->length > 2048) {
+				if (le16_to_cpu(de->length) > 292 || (le16_to_cpu(de->length) < 32) || (le16_to_cpu(de->length) & 3) || p + le16_to_cpu(de->length) > 2048) {
 					hpfs_error(s, "bad dirent size in dnode %08x, dirent %03x, last %03x", secno, p, pp);
 					goto bail;
 				}
-				if (((31 + de->namelen + de->down*4 + 3) & ~3) != de->length) {
-					if (((31 + de->namelen + de->down*4 + 3) & ~3) < de->length && s->s_flags & MS_RDONLY) goto ok;
+				if (((31 + de->namelen + de->down*4 + 3) & ~3) != le16_to_cpu(de->length)) {
+					if (((31 + de->namelen + de->down*4 + 3) & ~3) < le16_to_cpu(de->length) && s->s_flags & MS_RDONLY) goto ok;
 					hpfs_error(s, "namelen does not match dirent size in dnode %08x, dirent %03x, last %03x", secno, p, pp);
 					goto bail;
 				}
@@ -251,7 +255,7 @@ struct dnode *hpfs_map_dnode(struct super_block *s, unsigned secno,
 				pp = p;
 				
 			}
-			if (p != dnode->first_free) {
+			if (p != le32_to_cpu(dnode->first_free)) {
 				hpfs_error(s, "size on last dirent does not match first_free; dnode %08x", secno);
 				goto bail;
 			}
@@ -277,7 +281,7 @@ dnode_secno hpfs_fnode_dno(struct super_block *s, ino_t ino)
 	if (!fnode)
 		return 0;
 
-	dno = fnode->u.external[0].disk_secno;
+	dno = le32_to_cpu(fnode->u.external[0].disk_secno);
 	brelse(bh);
 	return dno;
 }
diff --git a/fs/hpfs/name.c b/fs/hpfs/name.c
index f24736d7a43..9acdf338def 100644
--- a/fs/hpfs/name.c
+++ b/fs/hpfs/name.c
@@ -8,39 +8,6 @@
 
 #include "hpfs_fn.h"
 
-static const char *text_postfix[]={
-".ASM", ".BAS", ".BAT", ".C", ".CC", ".CFG", ".CMD", ".CON", ".CPP", ".DEF",
-".DOC", ".DPR", ".ERX", ".H", ".HPP", ".HTM", ".HTML", ".JAVA", ".LOG", ".PAS",
-".RC", ".TEX", ".TXT", ".Y", ""};
-
-static const char *text_prefix[]={
-"AUTOEXEC.", "CHANGES", "COPYING", "CONFIG.", "CREDITS", "FAQ", "FILE_ID.DIZ",
-"MAKEFILE", "READ.ME", "README", "TERMCAP", ""};
-
-void hpfs_decide_conv(struct inode *inode, const unsigned char *name, unsigned len)
-{
-	struct hpfs_inode_info *hpfs_inode = hpfs_i(inode);
-	int i;
-	if (hpfs_inode->i_conv != CONV_AUTO) return;
-	for (i = 0; *text_postfix[i]; i++) {
-		int l = strlen(text_postfix[i]);
-		if (l <= len)
-			if (!hpfs_compare_names(inode->i_sb, text_postfix[i], l, name + len - l, l, 0))
-				goto text;
-	}
-	for (i = 0; *text_prefix[i]; i++) {
-		int l = strlen(text_prefix[i]);
-		if (l <= len)
-			if (!hpfs_compare_names(inode->i_sb, text_prefix[i], l, name, l, 0))
-				goto text;
-	}
-	hpfs_inode->i_conv = CONV_BINARY;
-	return;
-	text:
-	hpfs_inode->i_conv = CONV_TEXT;
-	return;
-}
-
 static inline int not_allowed_char(unsigned char c)
 {
 	return c<' ' || c=='"' || c=='*' || c=='/' || c==':' || c=='<' ||
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index d5f8c8a1902..1f05839c27a 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -29,7 +29,7 @@ static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	fnode = hpfs_alloc_fnode(dir->i_sb, hpfs_i(dir)->i_dno, &fno, &bh);
 	if (!fnode)
 		goto bail;
-	dnode = hpfs_alloc_dnode(dir->i_sb, fno, &dno, &qbh0, 1);
+	dnode = hpfs_alloc_dnode(dir->i_sb, fno, &dno, &qbh0);
 	if (!dnode)
 		goto bail1;
 	memset(&dee, 0, sizeof dee);
@@ -37,8 +37,8 @@ static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	if (!(mode & 0222)) dee.read_only = 1;
 	/*dee.archive = 0;*/
 	dee.hidden = name[0] == '.';
-	dee.fnode = fno;
-	dee.creation_date = dee.write_date = dee.read_date = gmt_to_local(dir->i_sb, get_seconds());
+	dee.fnode = cpu_to_le32(fno);
+	dee.creation_date = dee.write_date = dee.read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
 	result = new_inode(dir->i_sb);
 	if (!result)
 		goto bail2;
@@ -46,7 +46,7 @@ static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	result->i_ino = fno;
 	hpfs_i(result)->i_parent_dir = dir->i_ino;
 	hpfs_i(result)->i_dno = dno;
-	result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, dee.creation_date);
+	result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
 	result->i_ctime.tv_nsec = 0; 
 	result->i_mtime.tv_nsec = 0; 
 	result->i_atime.tv_nsec = 0; 
@@ -60,8 +60,7 @@ static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	if (dee.read_only)
 		result->i_mode &= ~0222;
 
-	mutex_lock(&hpfs_i(dir)->i_mutex);
-	r = hpfs_add_dirent(dir, name, len, &dee, 0);
+	r = hpfs_add_dirent(dir, name, len, &dee);
 	if (r == 1)
 		goto bail3;
 	if (r == -1) {
@@ -70,21 +69,21 @@ static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	}
 	fnode->len = len;
 	memcpy(fnode->name, name, len > 15 ? 15 : len);
-	fnode->up = dir->i_ino;
+	fnode->up = cpu_to_le32(dir->i_ino);
 	fnode->dirflag = 1;
 	fnode->btree.n_free_nodes = 7;
 	fnode->btree.n_used_nodes = 1;
-	fnode->btree.first_free = 0x14;
-	fnode->u.external[0].disk_secno = dno;
-	fnode->u.external[0].file_secno = -1;
+	fnode->btree.first_free = cpu_to_le16(0x14);
+	fnode->u.external[0].disk_secno = cpu_to_le32(dno);
+	fnode->u.external[0].file_secno = cpu_to_le32(-1);
 	dnode->root_dnode = 1;
-	dnode->up = fno;
+	dnode->up = cpu_to_le32(fno);
 	de = hpfs_add_de(dir->i_sb, dnode, "\001\001", 2, 0);
-	de->creation_date = de->write_date = de->read_date = gmt_to_local(dir->i_sb, get_seconds());
+	de->creation_date = de->write_date = de->read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
 	if (!(mode & 0222)) de->read_only = 1;
 	de->first = de->directory = 1;
 	/*de->hidden = de->system = 0;*/
-	de->fnode = fno;
+	de->fnode = cpu_to_le32(fno);
 	mark_buffer_dirty(bh);
 	brelse(bh);
 	hpfs_mark_4buffers_dirty(&qbh0);
@@ -101,11 +100,9 @@ static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 		hpfs_write_inode_nolock(result);
 	}
 	d_instantiate(dentry, result);
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
 	hpfs_unlock(dir->i_sb);
 	return 0;
 bail3:
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
 	iput(result);
 bail2:
 	hpfs_brelse4(&qbh0);
@@ -140,8 +137,8 @@ static int hpfs_create(struct inode *dir, struct dentry *dentry, int mode, struc
 	if (!(mode & 0222)) dee.read_only = 1;
 	dee.archive = 1;
 	dee.hidden = name[0] == '.';
-	dee.fnode = fno;
-	dee.creation_date = dee.write_date = dee.read_date = gmt_to_local(dir->i_sb, get_seconds());
+	dee.fnode = cpu_to_le32(fno);
+	dee.creation_date = dee.write_date = dee.read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
 
 	result = new_inode(dir->i_sb);
 	if (!result)
@@ -154,9 +151,8 @@ static int hpfs_create(struct inode *dir, struct dentry *dentry, int mode, struc
 	result->i_op = &hpfs_file_iops;
 	result->i_fop = &hpfs_file_ops;
 	result->i_nlink = 1;
-	hpfs_decide_conv(result, name, len);
 	hpfs_i(result)->i_parent_dir = dir->i_ino;
-	result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, dee.creation_date);
+	result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
 	result->i_ctime.tv_nsec = 0;
 	result->i_mtime.tv_nsec = 0;
 	result->i_atime.tv_nsec = 0;
@@ -168,8 +164,7 @@ static int hpfs_create(struct inode *dir, struct dentry *dentry, int mode, struc
 	result->i_data.a_ops = &hpfs_aops;
 	hpfs_i(result)->mmu_private = 0;
 
-	mutex_lock(&hpfs_i(dir)->i_mutex);
-	r = hpfs_add_dirent(dir, name, len, &dee, 0);
+	r = hpfs_add_dirent(dir, name, len, &dee);
 	if (r == 1)
 		goto bail2;
 	if (r == -1) {
@@ -178,7 +173,7 @@ static int hpfs_create(struct inode *dir, struct dentry *dentry, int mode, struc
 	}
 	fnode->len = len;
 	memcpy(fnode->name, name, len > 15 ? 15 : len);
-	fnode->up = dir->i_ino;
+	fnode->up = cpu_to_le32(dir->i_ino);
 	mark_buffer_dirty(bh);
 	brelse(bh);
 
@@ -193,12 +188,10 @@ static int hpfs_create(struct inode *dir, struct dentry *dentry, int mode, struc
 		hpfs_write_inode_nolock(result);
 	}
 	d_instantiate(dentry, result);
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
 	hpfs_unlock(dir->i_sb);
 	return 0;
 
 bail2:
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
 	iput(result);
 bail1:
 	brelse(bh);
@@ -232,8 +225,8 @@ static int hpfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t
 	if (!(mode & 0222)) dee.read_only = 1;
 	dee.archive = 1;
 	dee.hidden = name[0] == '.';
-	dee.fnode = fno;
-	dee.creation_date = dee.write_date = dee.read_date = gmt_to_local(dir->i_sb, get_seconds());
+	dee.fnode = cpu_to_le32(fno);
+	dee.creation_date = dee.write_date = dee.read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
 
 	result = new_inode(dir->i_sb);
 	if (!result)
@@ -242,7 +235,7 @@ static int hpfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t
 	hpfs_init_inode(result);
 	result->i_ino = fno;
 	hpfs_i(result)->i_parent_dir = dir->i_ino;
-	result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, dee.creation_date);
+	result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
 	result->i_ctime.tv_nsec = 0;
 	result->i_mtime.tv_nsec = 0;
 	result->i_atime.tv_nsec = 0;
@@ -254,8 +247,7 @@ static int hpfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t
 	result->i_blocks = 1;
 	init_special_inode(result, mode, rdev);
 
-	mutex_lock(&hpfs_i(dir)->i_mutex);
-	r = hpfs_add_dirent(dir, name, len, &dee, 0);
+	r = hpfs_add_dirent(dir, name, len, &dee);
 	if (r == 1)
 		goto bail2;
 	if (r == -1) {
@@ -264,19 +256,17 @@ static int hpfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t
 	}
 	fnode->len = len;
 	memcpy(fnode->name, name, len > 15 ? 15 : len);
-	fnode->up = dir->i_ino;
+	fnode->up = cpu_to_le32(dir->i_ino);
 	mark_buffer_dirty(bh);
 
 	insert_inode_hash(result);
 
 	hpfs_write_inode_nolock(result);
 	d_instantiate(dentry, result);
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
 	brelse(bh);
 	hpfs_unlock(dir->i_sb);
 	return 0;
 bail2:
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
 	iput(result);
 bail1:
 	brelse(bh);
@@ -310,8 +300,8 @@ static int hpfs_symlink(struct inode *dir, struct dentry *dentry, const char *sy
 	memset(&dee, 0, sizeof dee);
 	dee.archive = 1;
 	dee.hidden = name[0] == '.';
-	dee.fnode = fno;
-	dee.creation_date = dee.write_date = dee.read_date = gmt_to_local(dir->i_sb, get_seconds());
+	dee.fnode = cpu_to_le32(fno);
+	dee.creation_date = dee.write_date = dee.read_date = cpu_to_le32(gmt_to_local(dir->i_sb, get_seconds()));
 
 	result = new_inode(dir->i_sb);
 	if (!result)
@@ -319,7 +309,7 @@ static int hpfs_symlink(struct inode *dir, struct dentry *dentry, const char *sy
 	result->i_ino = fno;
 	hpfs_init_inode(result);
 	hpfs_i(result)->i_parent_dir = dir->i_ino;
-	result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, dee.creation_date);
+	result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
 	result->i_ctime.tv_nsec = 0;
 	result->i_mtime.tv_nsec = 0;
 	result->i_atime.tv_nsec = 0;
@@ -333,8 +323,7 @@ static int hpfs_symlink(struct inode *dir, struct dentry *dentry, const char *sy
 	result->i_op = &page_symlink_inode_operations;
 	result->i_data.a_ops = &hpfs_symlink_aops;
 
-	mutex_lock(&hpfs_i(dir)->i_mutex);
-	r = hpfs_add_dirent(dir, name, len, &dee, 0);
+	r = hpfs_add_dirent(dir, name, len, &dee);
 	if (r == 1)
 		goto bail2;
 	if (r == -1) {
@@ -343,7 +332,7 @@ static int hpfs_symlink(struct inode *dir, struct dentry *dentry, const char *sy
 	}
 	fnode->len = len;
 	memcpy(fnode->name, name, len > 15 ? 15 : len);
-	fnode->up = dir->i_ino;
+	fnode->up = cpu_to_le32(dir->i_ino);
 	hpfs_set_ea(result, fnode, "SYMLINK", symlink, strlen(symlink));
 	mark_buffer_dirty(bh);
 	brelse(bh);
@@ -352,11 +341,9 @@ static int hpfs_symlink(struct inode *dir, struct dentry *dentry, const char *sy
 
 	hpfs_write_inode_nolock(result);
 	d_instantiate(dentry, result);
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
 	hpfs_unlock(dir->i_sb);
 	return 0;
 bail2:
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
 	iput(result);
 bail1:
 	brelse(bh);
@@ -374,7 +361,6 @@ static int hpfs_unlink(struct inode *dir, struct dentry *dentry)
 	struct hpfs_dirent *de;
 	struct inode *inode = dentry->d_inode;
 	dnode_secno dno;
-	fnode_secno fno;
 	int r;
 	int rep = 0;
 	int err;
@@ -382,8 +368,6 @@ static int hpfs_unlink(struct inode *dir, struct dentry *dentry)
 	hpfs_lock(dir->i_sb);
 	hpfs_adjust_length(name, &len);
 again:
-	mutex_lock(&hpfs_i(inode)->i_parent_mutex);
-	mutex_lock(&hpfs_i(dir)->i_mutex);
 	err = -ENOENT;
 	de = map_dirent(dir, hpfs_i(dir)->i_dno, name, len, &dno, &qbh);
 	if (!de)
@@ -397,7 +381,6 @@ again:
 	if (de->directory)
 		goto out1;
 
-	fno = de->fnode;
 	r = hpfs_remove_dirent(dir, dno, de, &qbh, 1);
 	switch (r) {
 	case 1:
@@ -410,8 +393,6 @@ again:
 		if (rep++)
 			break;
 
-		mutex_unlock(&hpfs_i(dir)->i_mutex);
-		mutex_unlock(&hpfs_i(inode)->i_parent_mutex);
 		dentry_unhash(dentry);
 		if (!d_unhashed(dentry)) {
 			dput(dentry);
@@ -445,8 +426,6 @@ again:
 out1:
 	hpfs_brelse4(&qbh);
 out:
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
-	mutex_unlock(&hpfs_i(inode)->i_parent_mutex);
 	hpfs_unlock(dir->i_sb);
 	return err;
 }
@@ -459,15 +438,12 @@ static int hpfs_rmdir(struct inode *dir, struct dentry *dentry)
 	struct hpfs_dirent *de;
 	struct inode *inode = dentry->d_inode;
 	dnode_secno dno;
-	fnode_secno fno;
 	int n_items = 0;
 	int err;
 	int r;
 
 	hpfs_adjust_length(name, &len);
 	hpfs_lock(dir->i_sb);
-	mutex_lock(&hpfs_i(inode)->i_parent_mutex);
-	mutex_lock(&hpfs_i(dir)->i_mutex);
 	err = -ENOENT;
 	de = map_dirent(dir, hpfs_i(dir)->i_dno, name, len, &dno, &qbh);
 	if (!de)
@@ -486,7 +462,6 @@ static int hpfs_rmdir(struct inode *dir, struct dentry *dentry)
 	if (n_items)
 		goto out1;
 
-	fno = de->fnode;
 	r = hpfs_remove_dirent(dir, dno, de, &qbh, 1);
 	switch (r) {
 	case 1:
@@ -505,8 +480,6 @@ static int hpfs_rmdir(struct inode *dir, struct dentry *dentry)
 out1:
 	hpfs_brelse4(&qbh);
 out:
-	mutex_unlock(&hpfs_i(dir)->i_mutex);
-	mutex_unlock(&hpfs_i(inode)->i_parent_mutex);
 	hpfs_unlock(dir->i_sb);
 	return err;
 }
@@ -568,12 +541,6 @@ static int hpfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 
 	hpfs_lock(i->i_sb);
 	/* order doesn't matter, due to VFS exclusion */
-	mutex_lock(&hpfs_i(i)->i_parent_mutex);
-	if (new_inode)
-		mutex_lock(&hpfs_i(new_inode)->i_parent_mutex);
-	mutex_lock(&hpfs_i(old_dir)->i_mutex);
-	if (new_dir != old_dir)
-		mutex_lock(&hpfs_i(new_dir)->i_mutex);
 	
 	/* Erm? Moving over the empty non-busy directory is perfectly legal */
 	if (new_inode && S_ISDIR(new_inode->i_mode)) {
@@ -610,9 +577,7 @@ static int hpfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 
 	if (new_dir == old_dir) hpfs_brelse4(&qbh);
 
-	hpfs_lock_creation(i->i_sb);
-	if ((r = hpfs_add_dirent(new_dir, new_name, new_len, &de, 1))) {
-		hpfs_unlock_creation(i->i_sb);
+	if ((r = hpfs_add_dirent(new_dir, new_name, new_len, &de))) {
 		if (r == -1) hpfs_error(new_dir->i_sb, "hpfs_rename: dirent already exists!");
 		err = r == 1 ? -ENOSPC : -EFSERROR;
 		if (new_dir != old_dir) hpfs_brelse4(&qbh);
@@ -621,20 +586,17 @@ static int hpfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	
 	if (new_dir == old_dir)
 		if (!(dep = map_dirent(old_dir, hpfs_i(old_dir)->i_dno, old_name, old_len, &dno, &qbh))) {
-			hpfs_unlock_creation(i->i_sb);
 			hpfs_error(i->i_sb, "lookup succeeded but map dirent failed at #2");
 			err = -ENOENT;
 			goto end1;
 		}
 
 	if ((r = hpfs_remove_dirent(old_dir, dno, dep, &qbh, 0))) {
-		hpfs_unlock_creation(i->i_sb);
 		hpfs_error(i->i_sb, "hpfs_rename: could not remove dirent");
 		err = r == 2 ? -ENOSPC : -EFSERROR;
 		goto end1;
 	}
-	hpfs_unlock_creation(i->i_sb);
-	
+
 	end:
 	hpfs_i(i)->i_parent_dir = new_dir->i_ino;
 	if (S_ISDIR(i->i_mode)) {
@@ -642,22 +604,14 @@ static int hpfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		drop_nlink(old_dir);
 	}
 	if ((fnode = hpfs_map_fnode(i->i_sb, i->i_ino, &bh))) {
-		fnode->up = new_dir->i_ino;
+		fnode->up = cpu_to_le32(new_dir->i_ino);
 		fnode->len = new_len;
 		memcpy(fnode->name, new_name, new_len>15?15:new_len);
 		if (new_len < 15) memset(&fnode->name[new_len], 0, 15 - new_len);
 		mark_buffer_dirty(bh);
 		brelse(bh);
 	}
-	hpfs_i(i)->i_conv = hpfs_sb(i->i_sb)->sb_conv;
-	hpfs_decide_conv(i, new_name, new_len);
 end1:
-	if (old_dir != new_dir)
-		mutex_unlock(&hpfs_i(new_dir)->i_mutex);
-	mutex_unlock(&hpfs_i(old_dir)->i_mutex);
-	mutex_unlock(&hpfs_i(i)->i_parent_mutex);
-	if (new_inode)
-		mutex_unlock(&hpfs_i(new_inode)->i_parent_mutex);
 	hpfs_unlock(i->i_sb);
 	return err;
 }
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index c89b4080858..98580a3b500 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -18,15 +18,16 @@
 
 /* Mark the filesystem dirty, so that chkdsk checks it when os/2 booted */
 
-static void mark_dirty(struct super_block *s)
+static void mark_dirty(struct super_block *s, int remount)
 {
-	if (hpfs_sb(s)->sb_chkdsk && !(s->s_flags & MS_RDONLY)) {
+	if (hpfs_sb(s)->sb_chkdsk && (remount || !(s->s_flags & MS_RDONLY))) {
 		struct buffer_head *bh;
 		struct hpfs_spare_block *sb;
 		if ((sb = hpfs_map_sector(s, 17, &bh, 0))) {
 			sb->dirty = 1;
 			sb->old_wrote = 0;
 			mark_buffer_dirty(bh);
+			sync_dirty_buffer(bh);
 			brelse(bh);
 		}
 	}
@@ -40,10 +41,12 @@ static void unmark_dirty(struct super_block *s)
 	struct buffer_head *bh;
 	struct hpfs_spare_block *sb;
 	if (s->s_flags & MS_RDONLY) return;
+	sync_blockdev(s->s_bdev);
 	if ((sb = hpfs_map_sector(s, 17, &bh, 0))) {
 		sb->dirty = hpfs_sb(s)->sb_chkdsk > 1 - hpfs_sb(s)->sb_was_error;
 		sb->old_wrote = hpfs_sb(s)->sb_chkdsk >= 2 && !hpfs_sb(s)->sb_was_error;
 		mark_buffer_dirty(bh);
+		sync_dirty_buffer(bh);
 		brelse(bh);
 	}
 }
@@ -63,13 +66,13 @@ void hpfs_error(struct super_block *s, const char *fmt, ...)
 	if (!hpfs_sb(s)->sb_was_error) {
 		if (hpfs_sb(s)->sb_err == 2) {
 			printk("; crashing the system because you wanted it\n");
-			mark_dirty(s);
+			mark_dirty(s, 0);
 			panic("HPFS panic");
 		} else if (hpfs_sb(s)->sb_err == 1) {
 			if (s->s_flags & MS_RDONLY) printk("; already mounted read-only\n");
 			else {
 				printk("; remounting read-only\n");
-				mark_dirty(s);
+				mark_dirty(s, 0);
 				s->s_flags |= MS_RDONLY;
 			}
 		} else if (s->s_flags & MS_RDONLY) printk("; going on - but anything won't be destroyed because it's read-only\n");
@@ -102,9 +105,12 @@ static void hpfs_put_super(struct super_block *s)
 {
 	struct hpfs_sb_info *sbi = hpfs_sb(s);
 
+	hpfs_lock(s);
+	unmark_dirty(s);
+	hpfs_unlock(s);
+
 	kfree(sbi->sb_cp_table);
 	kfree(sbi->sb_bmp_dir);
-	unmark_dirty(s);
 	s->s_fs_info = NULL;
 	kfree(sbi);
 }
@@ -129,7 +135,7 @@ static unsigned count_bitmaps(struct super_block *s)
 	n_bands = (hpfs_sb(s)->sb_fs_size + 0x3fff) >> 14;
 	count = 0;
 	for (n = 0; n < n_bands; n++)
-		count += hpfs_count_one_bitmap(s, hpfs_sb(s)->sb_bmp_dir[n]);
+		count += hpfs_count_one_bitmap(s, le32_to_cpu(hpfs_sb(s)->sb_bmp_dir[n]));
 	return count;
 }
 
@@ -188,8 +194,6 @@ static void init_once(void *foo)
 {
 	struct hpfs_inode_info *ei = (struct hpfs_inode_info *) foo;
 
-	mutex_init(&ei->i_mutex);
-	mutex_init(&ei->i_parent_mutex);
 	inode_init_once(&ei->vfs_inode);
 }
 
@@ -218,7 +222,6 @@ static void destroy_inodecache(void)
 
 enum {
 	Opt_help, Opt_uid, Opt_gid, Opt_umask, Opt_case_lower, Opt_case_asis,
-	Opt_conv_binary, Opt_conv_text, Opt_conv_auto,
 	Opt_check_none, Opt_check_normal, Opt_check_strict,
 	Opt_err_cont, Opt_err_ro, Opt_err_panic,
 	Opt_eas_no, Opt_eas_ro, Opt_eas_rw,
@@ -233,9 +236,6 @@ static const match_table_t tokens = {
 	{Opt_umask, "umask=%o"},
 	{Opt_case_lower, "case=lower"},
 	{Opt_case_asis, "case=asis"},
-	{Opt_conv_binary, "conv=binary"},
-	{Opt_conv_text, "conv=text"},
-	{Opt_conv_auto, "conv=auto"},
 	{Opt_check_none, "check=none"},
 	{Opt_check_normal, "check=normal"},
 	{Opt_check_strict, "check=strict"},
@@ -253,7 +253,7 @@ static const match_table_t tokens = {
 };
 
 static int parse_opts(char *opts, uid_t *uid, gid_t *gid, umode_t *umask,
-		      int *lowercase, int *conv, int *eas, int *chk, int *errs,
+		      int *lowercase, int *eas, int *chk, int *errs,
 		      int *chkdsk, int *timeshift)
 {
 	char *p;
@@ -295,15 +295,6 @@ static int parse_opts(char *opts, uid_t *uid, gid_t *gid, umode_t *umask,
 		case Opt_case_asis:
 			*lowercase = 0;
 			break;
-		case Opt_conv_binary:
-			*conv = CONV_BINARY;
-			break;
-		case Opt_conv_text:
-			*conv = CONV_TEXT;
-			break;
-		case Opt_conv_auto:
-			*conv = CONV_AUTO;
-			break;
 		case Opt_check_none:
 			*chk = 0;
 			break;
@@ -370,9 +361,6 @@ HPFS filesystem options:\n\
       umask=xxx         set mode of files that don't have mode specified in eas\n\
       case=lower        lowercase all files\n\
       case=asis         do not lowercase files (default)\n\
-      conv=binary       do not convert CR/LF -> LF (default)\n\
-      conv=auto         convert only files with known text extensions\n\
-      conv=text         convert all files\n\
       check=none        no fs checks - kernel may crash on corrupted filesystem\n\
       check=normal      do some checks - it should not crash (default)\n\
       check=strict      do extra time-consuming checks, used for debugging\n\
@@ -394,7 +382,7 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 	uid_t uid;
 	gid_t gid;
 	umode_t umask;
-	int lowercase, conv, eas, chk, errs, chkdsk, timeshift;
+	int lowercase, eas, chk, errs, chkdsk, timeshift;
 	int o;
 	struct hpfs_sb_info *sbi = hpfs_sb(s);
 	char *new_opts = kstrdup(data, GFP_KERNEL);
@@ -405,11 +393,11 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 	lock_super(s);
 	uid = sbi->sb_uid; gid = sbi->sb_gid;
 	umask = 0777 & ~sbi->sb_mode;
-	lowercase = sbi->sb_lowercase; conv = sbi->sb_conv;
+	lowercase = sbi->sb_lowercase;
 	eas = sbi->sb_eas; chk = sbi->sb_chk; chkdsk = sbi->sb_chkdsk;
 	errs = sbi->sb_err; timeshift = sbi->sb_timeshift;
 
-	if (!(o = parse_opts(data, &uid, &gid, &umask, &lowercase, &conv,
+	if (!(o = parse_opts(data, &uid, &gid, &umask, &lowercase,
 	    &eas, &chk, &errs, &chkdsk, &timeshift))) {
 		printk("HPFS: bad mount options.\n");
 		goto out_err;
@@ -427,11 +415,11 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 
 	sbi->sb_uid = uid; sbi->sb_gid = gid;
 	sbi->sb_mode = 0777 & ~umask;
-	sbi->sb_lowercase = lowercase; sbi->sb_conv = conv;
+	sbi->sb_lowercase = lowercase;
 	sbi->sb_eas = eas; sbi->sb_chk = chk; sbi->sb_chkdsk = chkdsk;
 	sbi->sb_err = errs; sbi->sb_timeshift = timeshift;
 
-	if (!(*flags & MS_RDONLY)) mark_dirty(s);
+	if (!(*flags & MS_RDONLY)) mark_dirty(s, 1);
 
 	replace_mount_options(s, new_opts);
 
@@ -471,7 +459,7 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 	uid_t uid;
 	gid_t gid;
 	umode_t umask;
-	int lowercase, conv, eas, chk, errs, chkdsk, timeshift;
+	int lowercase, eas, chk, errs, chkdsk, timeshift;
 
 	dnode_secno root_dno;
 	struct hpfs_dirent *de = NULL;
@@ -479,11 +467,6 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 
 	int o;
 
-	if (num_possible_cpus() > 1) {
-		printk(KERN_ERR "HPFS is not SMP safe\n");
-		return -EINVAL;
-	}
-
 	save_mount_options(s, options);
 
 	sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
@@ -495,20 +478,20 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 	sbi->sb_bmp_dir = NULL;
 	sbi->sb_cp_table = NULL;
 
-	mutex_init(&sbi->hpfs_creation_de);
+	mutex_init(&sbi->hpfs_mutex);
+	hpfs_lock(s);
 
 	uid = current_uid();
 	gid = current_gid();
 	umask = current_umask();
 	lowercase = 0;
-	conv = CONV_BINARY;
 	eas = 2;
 	chk = 1;
 	errs = 1;
 	chkdsk = 1;
 	timeshift = 0;
 
-	if (!(o = parse_opts(options, &uid, &gid, &umask, &lowercase, &conv,
+	if (!(o = parse_opts(options, &uid, &gid, &umask, &lowercase,
 	    &eas, &chk, &errs, &chkdsk, &timeshift))) {
 		printk("HPFS: bad mount options.\n");
 		goto bail0;
@@ -526,9 +509,9 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 	if (!(spareblock = hpfs_map_sector(s, 17, &bh2, 0))) goto bail3;
 
 	/* Check magics */
-	if (/*bootblock->magic != BB_MAGIC
-	    ||*/ superblock->magic != SB_MAGIC
-	    || spareblock->magic != SP_MAGIC) {
+	if (/*le16_to_cpu(bootblock->magic) != BB_MAGIC
+	    ||*/ le32_to_cpu(superblock->magic) != SB_MAGIC
+	    || le32_to_cpu(spareblock->magic) != SP_MAGIC) {
 		if (!silent) printk("HPFS: Bad magic ... probably not HPFS\n");
 		goto bail4;
 	}
@@ -549,19 +532,18 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 	s->s_op = &hpfs_sops;
 	s->s_d_op = &hpfs_dentry_operations;
 
-	sbi->sb_root = superblock->root;
-	sbi->sb_fs_size = superblock->n_sectors;
-	sbi->sb_bitmaps = superblock->bitmaps;
-	sbi->sb_dirband_start = superblock->dir_band_start;
-	sbi->sb_dirband_size = superblock->n_dir_band;
-	sbi->sb_dmap = superblock->dir_band_bitmap;
+	sbi->sb_root = le32_to_cpu(superblock->root);
+	sbi->sb_fs_size = le32_to_cpu(superblock->n_sectors);
+	sbi->sb_bitmaps = le32_to_cpu(superblock->bitmaps);
+	sbi->sb_dirband_start = le32_to_cpu(superblock->dir_band_start);
+	sbi->sb_dirband_size = le32_to_cpu(superblock->n_dir_band);
+	sbi->sb_dmap = le32_to_cpu(superblock->dir_band_bitmap);
 	sbi->sb_uid = uid;
 	sbi->sb_gid = gid;
 	sbi->sb_mode = 0777 & ~umask;
 	sbi->sb_n_free = -1;
 	sbi->sb_n_free_dnodes = -1;
 	sbi->sb_lowercase = lowercase;
-	sbi->sb_conv = conv;
 	sbi->sb_eas = eas;
 	sbi->sb_chk = chk;
 	sbi->sb_chkdsk = chkdsk;
@@ -573,7 +555,7 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 	sbi->sb_max_fwd_alloc = 0xffffff;
 	
 	/* Load bitmap directory */
-	if (!(sbi->sb_bmp_dir = hpfs_load_bitmap_directory(s, superblock->bitmaps)))
+	if (!(sbi->sb_bmp_dir = hpfs_load_bitmap_directory(s, le32_to_cpu(superblock->bitmaps))))
 		goto bail4;
 	
 	/* Check for general fs errors*/
@@ -591,20 +573,20 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 		mark_buffer_dirty(bh2);
 	}
 
-	if (spareblock->hotfixes_used || spareblock->n_spares_used) {
+	if (le32_to_cpu(spareblock->hotfixes_used) || le32_to_cpu(spareblock->n_spares_used)) {
 		if (errs >= 2) {
 			printk("HPFS: Hotfixes not supported here, try chkdsk\n");
-			mark_dirty(s);
+			mark_dirty(s, 0);
 			goto bail4;
 		}
 		hpfs_error(s, "hotfixes not supported here, try chkdsk");
 		if (errs == 0) printk("HPFS: Proceeding, but your filesystem will be probably corrupted by this driver...\n");
 		else printk("HPFS: This driver may read bad files or crash when operating on disk with hotfixes.\n");
 	}
-	if (spareblock->n_dnode_spares != spareblock->n_dnode_spares_free) {
+	if (le32_to_cpu(spareblock->n_dnode_spares) != le32_to_cpu(spareblock->n_dnode_spares_free)) {
 		if (errs >= 2) {
 			printk("HPFS: Spare dnodes used, try chkdsk\n");
-			mark_dirty(s);
+			mark_dirty(s, 0);
 			goto bail4;
 		}
 		hpfs_error(s, "warning: spare dnodes used, try chkdsk");
@@ -612,26 +594,26 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 	}
 	if (chk) {
 		unsigned a;
-		if (superblock->dir_band_end - superblock->dir_band_start + 1 != superblock->n_dir_band ||
-		    superblock->dir_band_end < superblock->dir_band_start || superblock->n_dir_band > 0x4000) {
+		if (le32_to_cpu(superblock->dir_band_end) - le32_to_cpu(superblock->dir_band_start) + 1 != le32_to_cpu(superblock->n_dir_band) ||
+		    le32_to_cpu(superblock->dir_band_end) < le32_to_cpu(superblock->dir_band_start) || le32_to_cpu(superblock->n_dir_band) > 0x4000) {
 			hpfs_error(s, "dir band size mismatch: dir_band_start==%08x, dir_band_end==%08x, n_dir_band==%08x",
-				superblock->dir_band_start, superblock->dir_band_end, superblock->n_dir_band);
+				le32_to_cpu(superblock->dir_band_start), le32_to_cpu(superblock->dir_band_end), le32_to_cpu(superblock->n_dir_band));
 			goto bail4;
 		}
 		a = sbi->sb_dirband_size;
 		sbi->sb_dirband_size = 0;
-		if (hpfs_chk_sectors(s, superblock->dir_band_start, superblock->n_dir_band, "dir_band") ||
-		    hpfs_chk_sectors(s, superblock->dir_band_bitmap, 4, "dir_band_bitmap") ||
-		    hpfs_chk_sectors(s, superblock->bitmaps, 4, "bitmaps")) {
-			mark_dirty(s);
+		if (hpfs_chk_sectors(s, le32_to_cpu(superblock->dir_band_start), le32_to_cpu(superblock->n_dir_band), "dir_band") ||
+		    hpfs_chk_sectors(s, le32_to_cpu(superblock->dir_band_bitmap), 4, "dir_band_bitmap") ||
+		    hpfs_chk_sectors(s, le32_to_cpu(superblock->bitmaps), 4, "bitmaps")) {
+			mark_dirty(s, 0);
 			goto bail4;
 		}
 		sbi->sb_dirband_size = a;
 	} else printk("HPFS: You really don't want any checks? You are crazy...\n");
 
 	/* Load code page table */
-	if (spareblock->n_code_pages)
-		if (!(sbi->sb_cp_table = hpfs_load_code_page(s, spareblock->code_page_dir)))
+	if (le32_to_cpu(spareblock->n_code_pages))
+		if (!(sbi->sb_cp_table = hpfs_load_code_page(s, le32_to_cpu(spareblock->code_page_dir))))
 			printk("HPFS: Warning: code page support is disabled\n");
 
 	brelse(bh2);
@@ -660,13 +642,13 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 	if (!de)
 		hpfs_error(s, "unable to find root dir");
 	else {
-		root->i_atime.tv_sec = local_to_gmt(s, de->read_date);
+		root->i_atime.tv_sec = local_to_gmt(s, le32_to_cpu(de->read_date));
 		root->i_atime.tv_nsec = 0;
-		root->i_mtime.tv_sec = local_to_gmt(s, de->write_date);
+		root->i_mtime.tv_sec = local_to_gmt(s, le32_to_cpu(de->write_date));
 		root->i_mtime.tv_nsec = 0;
-		root->i_ctime.tv_sec = local_to_gmt(s, de->creation_date);
+		root->i_ctime.tv_sec = local_to_gmt(s, le32_to_cpu(de->creation_date));
 		root->i_ctime.tv_nsec = 0;
-		hpfs_i(root)->i_ea_size = de->ea_size;
+		hpfs_i(root)->i_ea_size = le16_to_cpu(de->ea_size);
 		hpfs_i(root)->i_parent_dir = root->i_ino;
 		if (root->i_size == -1)
 			root->i_size = 2048;
@@ -674,6 +656,7 @@ static int hpfs_fill_super(struct super_block *s, void *options, int silent)
 			root->i_blocks = 5;
 		hpfs_brelse4(&qbh);
 	}
+	hpfs_unlock(s);
 	return 0;
 
 bail4:	brelse(bh2);
@@ -681,6 +664,7 @@ bail3:	brelse(bh1);
 bail2:	brelse(bh0);
 bail1:
 bail0:
+	hpfs_unlock(s);
 	kfree(sbi->sb_bmp_dir);
 	kfree(sbi->sb_cp_table);
 	s->s_fs_info = NULL;
diff --git a/fs/inode.c b/fs/inode.c
index 5f4e11aaeb5..33c963d08ab 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -125,6 +125,14 @@ __cacheline_aligned_in_smp DEFINE_SPINLOCK(inode_wb_list_lock);
 static DECLARE_RWSEM(iprune_sem);
 
 /*
+ * Empty aops. Can be used for the cases where the user does not
+ * define any of the address_space operations.
+ */
+const struct address_space_operations empty_aops = {
+};
+EXPORT_SYMBOL(empty_aops);
+
+/*
  * Statistics gathering..
  */
 struct inodes_stat_t inodes_stat;
@@ -176,7 +184,6 @@ int proc_nr_inodes(ctl_table *table, int write,
  */
 int inode_init_always(struct super_block *sb, struct inode *inode)
 {
-	static const struct address_space_operations empty_aops;
 	static const struct inode_operations empty_iops;
 	static const struct file_operations empty_fops;
 	struct address_space *const mapping = &inode->i_data;
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index da871ee084d..69b18045946 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -362,7 +362,7 @@ void journal_commit_transaction(journal_t *journal)
 	 * we do not require it to remember exactly which old buffers it
 	 * has reserved.  This is consistent with the existing behaviour
 	 * that multiple journal_get_write_access() calls to the same
-	 * buffer are perfectly permissable.
+	 * buffer are perfectly permissible.
 	 */
 	while (commit_transaction->t_reserved_list) {
 		jh = commit_transaction->t_reserved_list;
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index eb11601f2e0..b3713afaaa9 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -770,7 +770,7 @@ journal_t * journal_init_dev(struct block_device *bdev,
 	journal->j_wbufsize = n;
 	journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL);
 	if (!journal->j_wbuf) {
-		printk(KERN_ERR "%s: Cant allocate bhs for commit thread\n",
+		printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n",
 			__func__);
 		goto out_err;
 	}
@@ -831,7 +831,7 @@ journal_t * journal_init_inode (struct inode *inode)
 	journal->j_wbufsize = n;
 	journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL);
 	if (!journal->j_wbuf) {
-		printk(KERN_ERR "%s: Cant allocate bhs for commit thread\n",
+		printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n",
 			__func__);
 		goto out_err;
 	}
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index d29018307e2..305a9076315 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -71,7 +71,7 @@
  * switching hash tables under them. For operations on the lists of entries in
  * the hash table j_revoke_lock is used.
  *
- * Finally, also replay code uses the hash tables but at this moment noone else
+ * Finally, also replay code uses the hash tables but at this moment no one else
  * can touch them (filesystem isn't mounted yet) and hence no locking is
  * needed.
  */
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 5b2e4c30a2a..60d2319651b 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1392,7 +1392,7 @@ int journal_stop(handle_t *handle)
 	 * by 30x or more...
 	 *
 	 * We try and optimize the sleep time against what the underlying disk
-	 * can do, instead of having a static sleep time.  This is usefull for
+	 * can do, instead of having a static sleep time.  This is useful for
 	 * the case where our storage is so fast that it is more optimal to go
 	 * ahead and force a flush and wait for the transaction to be committed
 	 * than it is to wait for an arbitrary amount of time for new writers to
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index fa36d7662b2..6e28000a4b2 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -105,6 +105,8 @@ static int journal_submit_commit_record(journal_t *journal,
 	int ret;
 	struct timespec now = current_kernel_time();
 
+	*cbh = NULL;
+
 	if (is_journal_aborted(journal))
 		return 0;
 
@@ -403,7 +405,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	 * we do not require it to remember exactly which old buffers it
 	 * has reserved.  This is consistent with the existing behaviour
 	 * that multiple jbd2_journal_get_write_access() calls to the same
-	 * buffer are perfectly permissable.
+	 * buffer are perfectly permissible.
 	 */
 	while (commit_transaction->t_reserved_list) {
 		jh = commit_transaction->t_reserved_list;
@@ -806,7 +808,7 @@ wait_for_iobuf:
 		if (err)
 			__jbd2_journal_abort_hard(journal);
 	}
-	if (!err && !is_journal_aborted(journal))
+	if (cbh)
 		err = journal_wait_on_commit_record(journal, cbh);
 	if (JBD2_HAS_INCOMPAT_FEATURE(journal,
 				      JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) &&
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 90407b8fece..e0ec3db1c39 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -917,7 +917,7 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev,
 	journal->j_wbufsize = n;
 	journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL);
 	if (!journal->j_wbuf) {
-		printk(KERN_ERR "%s: Cant allocate bhs for commit thread\n",
+		printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n",
 			__func__);
 		goto out_err;
 	}
@@ -983,7 +983,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode)
 	journal->j_wbufsize = n;
 	journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL);
 	if (!journal->j_wbuf) {
-		printk(KERN_ERR "%s: Cant allocate bhs for commit thread\n",
+		printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n",
 			__func__);
 		goto out_err;
 	}
@@ -2413,10 +2413,12 @@ const char *jbd2_dev_to_name(dev_t device)
 	new_dev = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
 	if (!new_dev)
 		return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
+	bd = bdget(device);
 	spin_lock(&devname_cache_lock);
 	if (devcache[i]) {
 		if (devcache[i]->device == device) {
 			kfree(new_dev);
+			bdput(bd);
 			ret = devcache[i]->devname;
 			spin_unlock(&devname_cache_lock);
 			return ret;
@@ -2425,7 +2427,6 @@ const char *jbd2_dev_to_name(dev_t device)
 	}
 	devcache[i] = new_dev;
 	devcache[i]->device = device;
-	bd = bdget(device);
 	if (bd) {
 		bdevname(bd, devcache[i]->devname);
 		bdput(bd);
diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c
index 9ad321fd63f..69fd9358811 100644
--- a/fs/jbd2/revoke.c
+++ b/fs/jbd2/revoke.c
@@ -71,7 +71,7 @@
  * switching hash tables under them. For operations on the lists of entries in
  * the hash table j_revoke_lock is used.
  *
- * Finally, also replay code uses the hash tables but at this moment noone else
+ * Finally, also replay code uses the hash tables but at this moment no one else
  * can touch them (filesystem isn't mounted yet) and hence no locking is
  * needed.
  */
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 1d1191050f9..05fa77a2371 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1403,7 +1403,7 @@ int jbd2_journal_stop(handle_t *handle)
 
 	/*
 	 * Once we drop t_updates, if it goes to zero the transaction
-	 * could start commiting on us and eventually disappear.  So
+	 * could start committing on us and eventually disappear.  So
 	 * once we do this, we must not dereference transaction
 	 * pointer again.
 	 */
diff --git a/fs/jffs2/TODO b/fs/jffs2/TODO
index 5d3ea4070f0..ca28964abd4 100644
--- a/fs/jffs2/TODO
+++ b/fs/jffs2/TODO
@@ -11,7 +11,7 @@
  - checkpointing (do we need this? scan is quite fast)
  - make the scan code populate real inodes so read_inode just after 
 	mount doesn't have to read the flash twice for large files.
-	Make this a per-inode option, changable with chattr, so you can
+	Make this a per-inode option, changeable with chattr, so you can
 	decide which inodes should be in-core immediately after mount.
  - test, test, test
 
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index d32ee9412cb..2ab1a0d9121 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -24,7 +24,7 @@
  *
  * Returns: 0 if the data CRC is correct;
  * 	    1 - if incorrect;
- *	    error code if an error occured.
+ *	    error code if an error occurred.
  */
 static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *tn)
 {
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index 800171dca53..e537fb0e018 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -121,7 +121,7 @@ int jffs2_sum_add_inode_mem(struct jffs2_summary *s, struct jffs2_raw_inode *ri,
 	temp->nodetype = ri->nodetype;
 	temp->inode = ri->ino;
 	temp->version = ri->version;
-	temp->offset = cpu_to_je32(ofs); /* relative offset from the begining of the jeb */
+	temp->offset = cpu_to_je32(ofs); /* relative offset from the beginning of the jeb */
 	temp->totlen = ri->totlen;
 	temp->next = NULL;
 
@@ -139,7 +139,7 @@ int jffs2_sum_add_dirent_mem(struct jffs2_summary *s, struct jffs2_raw_dirent *r
 
 	temp->nodetype = rd->nodetype;
 	temp->totlen = rd->totlen;
-	temp->offset = cpu_to_je32(ofs);	/* relative from the begining of the jeb */
+	temp->offset = cpu_to_je32(ofs);	/* relative from the beginning of the jeb */
 	temp->pino = rd->pino;
 	temp->version = rd->version;
 	temp->ino = rd->ino;
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 07ee1546b2f..4515bea0268 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -1116,7 +1116,7 @@ int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c,
 
 /*
  * On NAND we try to mark this block bad. If the block was erased more
- * than MAX_ERASE_FAILURES we mark it finaly bad.
+ * than MAX_ERASE_FAILURES we mark it finally bad.
  * Don't care about failures. This block remains on the erase-pending
  * or badblock list as long as nobody manipulates the flash with
  * a bootloader or something like that.
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index c92ea3b3ea5..4496872cf4e 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -1649,7 +1649,7 @@ static int dbFindCtl(struct bmap * bmp, int l2nb, int level, s64 * blkno)
 		}
 
 		/* search the tree within the dmap control page for
-		 * sufficent free space.  if sufficient free space is found,
+		 * sufficient free space.  if sufficient free space is found,
 		 * dbFindLeaf() returns the index of the leaf at which
 		 * free space was found.
 		 */
@@ -2744,7 +2744,7 @@ static int dbJoin(dmtree_t * tp, int leafno, int newval)
 			/* check which (leafno or buddy) is the left buddy.
 			 * the left buddy gets to claim the blocks resulting
 			 * from the join while the right gets to claim none.
-			 * the left buddy is also eligable to participate in
+			 * the left buddy is also eligible to participate in
 			 * a join at the next higher level while the right
 			 * is not.
 			 *
diff --git a/fs/jfs/jfs_extent.c b/fs/jfs/jfs_extent.c
index 5d3bbd10f8d..e5fe8506ed1 100644
--- a/fs/jfs/jfs_extent.c
+++ b/fs/jfs/jfs_extent.c
@@ -126,7 +126,7 @@ extAlloc(struct inode *ip, s64 xlen, s64 pno, xad_t * xp, bool abnr)
 
 	/* allocate the disk blocks for the extent.  initially, extBalloc()
 	 * will try to allocate disk blocks for the requested size (xlen).
-	 * if this fails (xlen contiguous free blocks not avaliable), it'll
+	 * if this fails (xlen contiguous free blocks not available), it'll
 	 * try to allocate a smaller number of blocks (producing a smaller
 	 * extent), with this smaller number of blocks consisting of the
 	 * requested number of blocks rounded down to the next smaller
@@ -481,7 +481,7 @@ int extFill(struct inode *ip, xad_t * xp)
  *
  *		initially, we will try to allocate disk blocks for the
  *		requested size (nblocks).  if this fails (nblocks
- *		contiguous free blocks not avaliable), we'll try to allocate
+ *		contiguous free blocks not available), we'll try to allocate
  *		a smaller number of blocks (producing a smaller extent), with
  *		this smaller number of blocks consisting of the requested
  *		number of blocks rounded down to the next smaller power of 2
@@ -575,7 +575,7 @@ extBalloc(struct inode *ip, s64 hint, s64 * nblocks, s64 * blkno)
  *		to a new set of blocks.  If moving the extent, we initially
  *		will try to allocate disk blocks for the requested size
  *		(newnblks).  if this fails (new contiguous free blocks not
- *		avaliable), we'll try to allocate a smaller number of
+ *		available), we'll try to allocate a smaller number of
  *		blocks (producing a smaller extent), with this smaller
  *		number of blocks consisting of the requested number of
  *		blocks rounded down to the next smaller power of 2
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index 3a09423b6c2..ed53a474016 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -1069,7 +1069,7 @@ int diFree(struct inode *ip)
 		 */
 		if (iagp->nfreeexts == cpu_to_le32(EXTSPERIAG - 1)) {
 			/* in preparation for removing the iag from the
-			 * ag extent free list, read the iags preceeding
+			 * ag extent free list, read the iags preceding
 			 * and following the iag on the ag extent free
 			 * list.
 			 */
@@ -1095,7 +1095,7 @@ int diFree(struct inode *ip)
 		int inofreefwd = le32_to_cpu(iagp->inofreefwd);
 
 		/* in preparation for removing the iag from the
-		 * ag inode free list, read the iags preceeding
+		 * ag inode free list, read the iags preceding
 		 * and following the iag on the ag inode free
 		 * list.  before reading these iags, we must make
 		 * sure that we already don't have them in hand
@@ -1681,7 +1681,7 @@ diAllocAG(struct inomap * imap, int agno, bool dir, struct inode *ip)
 	 * try to allocate a new extent of free inodes.
 	 */
 	if (addext) {
-		/* if free space is not avaliable for this new extent, try
+		/* if free space is not available for this new extent, try
 		 * below to allocate a free and existing (already backed)
 		 * inode from the ag.
 		 */
@@ -2036,7 +2036,7 @@ static int diAllocBit(struct inomap * imap, struct iag * iagp, int ino)
 
 	/* check if this is the last free inode within the iag.
 	 * if so, it will have to be removed from the ag free
-	 * inode list, so get the iags preceeding and following
+	 * inode list, so get the iags preceding and following
 	 * it on the list.
 	 */
 	if (iagp->nfreeinos == cpu_to_le32(1)) {
@@ -2208,7 +2208,7 @@ static int diNewExt(struct inomap * imap, struct iag * iagp, int extno)
 
 	/* check if this is the last free extent within the
 	 * iag.  if so, the iag must be removed from the ag
-	 * free extent list, so get the iags preceeding and
+	 * free extent list, so get the iags preceding and
 	 * following the iag on this list.
 	 */
 	if (iagp->nfreeexts == cpu_to_le32(1)) {
@@ -2504,7 +2504,7 @@ diNewIAG(struct inomap * imap, int *iagnop, int agno, struct metapage ** mpp)
 		}
 
 
-		/* get the next avaliable iag number */
+		/* get the next available iag number */
 		iagno = imap->im_nextiag;
 
 		/* make sure that we have not exceeded the maximum inode
@@ -2615,7 +2615,7 @@ diNewIAG(struct inomap * imap, int *iagnop, int agno, struct metapage ** mpp)
 
 		duplicateIXtree(sb, blkno, xlen, &xaddr);
 
-		/* update the next avaliable iag number */
+		/* update the next available iag number */
 		imap->im_nextiag += 1;
 
 		/* Add the iag to the iag free list so we don't lose the iag
diff --git a/fs/jfs/jfs_logmgr.h b/fs/jfs/jfs_logmgr.h
index 9236bc49ae7..e38c2159885 100644
--- a/fs/jfs/jfs_logmgr.h
+++ b/fs/jfs/jfs_logmgr.h
@@ -288,7 +288,7 @@ struct lrd {
 		/*
 		 *	SYNCPT: log sync point
 		 *
-		 * replay log upto syncpt address specified;
+		 * replay log up to syncpt address specified;
 		 */
 		struct {
 			__le32 sync;	/* 4: syncpt address (0 = here) */
diff --git a/fs/jfs/jfs_metapage.h b/fs/jfs/jfs_metapage.h
index d94f8d9e87d..a78beda85f6 100644
--- a/fs/jfs/jfs_metapage.h
+++ b/fs/jfs/jfs_metapage.h
@@ -75,7 +75,7 @@ extern void grab_metapage(struct metapage *);
 extern void force_metapage(struct metapage *);
 
 /*
- * hold_metapage and put_metapage are used in conjuction.  The page lock
+ * hold_metapage and put_metapage are used in conjunction.  The page lock
  * is not dropped between the two, so no other threads can get or release
  * the metapage
  */
diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c
index 9466957ec84..f6cc0c09ec6 100644
--- a/fs/jfs/jfs_txnmgr.c
+++ b/fs/jfs/jfs_txnmgr.c
@@ -636,7 +636,7 @@ struct tlock *txLock(tid_t tid, struct inode *ip, struct metapage * mp,
 	 * the inode of the page and available to all anonymous
 	 * transactions until txCommit() time at which point
 	 * they are transferred to the transaction tlock list of
-	 * the commiting transaction of the inode)
+	 * the committing transaction of the inode)
 	 */
 	if (xtid == 0) {
 		tlck->tid = tid;
diff --git a/fs/jfs/resize.c b/fs/jfs/resize.c
index 1aba0039f1c..8ea5efb5a34 100644
--- a/fs/jfs/resize.c
+++ b/fs/jfs/resize.c
@@ -57,7 +57,7 @@
  * 2. compute new FSCKSize from new LVSize;
  * 3. set new FSSize as MIN(FSSize, LVSize-(LogSize+FSCKSize)) where
  *    assert(new FSSize >= old FSSize),
- *    i.e., file system must not be shrinked;
+ *    i.e., file system must not be shrunk;
  */
 int jfs_extendfs(struct super_block *sb, s64 newLVSize, int newLogSize)
 {
@@ -182,7 +182,7 @@ int jfs_extendfs(struct super_block *sb, s64 newLVSize, int newLogSize)
 	 */
 	newFSSize = newLVSize - newLogSize - newFSCKSize;
 
-	/* file system cannot be shrinked */
+	/* file system cannot be shrunk */
 	if (newFSSize < bmp->db_mapsize) {
 		rc = -EINVAL;
 		goto out;
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index eeca48a031a..06c8a67cbe7 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -644,7 +644,7 @@ static int jfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
  * acquiring the locks... As quota files are never truncated and quota code
- * itself serializes the operations (and noone else should touch the files)
+ * itself serializes the operations (and no one else should touch the files)
  * we don't have to be afraid of races */
 static ssize_t jfs_quota_read(struct super_block *sb, int type, char *data,
 			      size_t len, loff_t off)
diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c
index 1adc8d455f0..df0de27c273 100644
--- a/fs/logfs/dev_bdev.c
+++ b/fs/logfs/dev_bdev.c
@@ -10,6 +10,7 @@
 #include <linux/blkdev.h>
 #include <linux/buffer_head.h>
 #include <linux/gfp.h>
+#include <linux/prefetch.h>
 
 #define PAGE_OFS(ofs) ((ofs) & (PAGE_SIZE-1))
 
diff --git a/fs/logfs/dev_mtd.c b/fs/logfs/dev_mtd.c
index 7466e9dcc8c..339e17e9133 100644
--- a/fs/logfs/dev_mtd.c
+++ b/fs/logfs/dev_mtd.c
@@ -60,7 +60,7 @@ static int mtd_write(struct super_block *sb, loff_t ofs, size_t len, void *buf)
  * asynchronous properties.  So just to prevent the first implementor of such
  * a thing from breaking logfs in 2350, we do the usual pointless dance to
  * declare a completion variable and wait for completion before returning
- * from mtd_erase().  What an excercise in futility!
+ * from mtd_erase().  What an exercise in futility!
  */
 static void logfs_erase_callback(struct erase_info *ei)
 {
diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c
index f9ddf0c388c..9ed89d1663f 100644
--- a/fs/logfs/dir.c
+++ b/fs/logfs/dir.c
@@ -92,7 +92,7 @@ static int beyond_eof(struct inode *inode, loff_t bix)
  * so short names (len <= 9) don't even occupy the complete 32bit name
  * space.  A prime >256 ensures short names quickly spread the 32bit
  * name space.  Add about 26 for the estimated amount of information
- * of each character and pick a prime nearby, preferrably a bit-sparse
+ * of each character and pick a prime nearby, preferably a bit-sparse
  * one.
  */
 static u32 hash_32(const char *s, int len, u32 seed)
diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c
index ee99a9f5dfd..9e22085231b 100644
--- a/fs/logfs/readwrite.c
+++ b/fs/logfs/readwrite.c
@@ -1616,7 +1616,7 @@ int logfs_rewrite_block(struct inode *inode, u64 bix, u64 ofs,
 		err = logfs_write_buf(inode, page, flags);
 		if (!err && shrink_level(gc_level) == 0) {
 			/* Rewrite cannot mark the inode dirty but has to
-			 * write it immediatly.
+			 * write it immediately.
 			 * Q: Can't we just create an alias for the inode
 			 * instead?  And if not, why not?
 			 */
diff --git a/fs/logfs/super.c b/fs/logfs/super.c
index 33435e4b14d..ce03a182c77 100644
--- a/fs/logfs/super.c
+++ b/fs/logfs/super.c
@@ -480,10 +480,6 @@ static int logfs_read_sb(struct super_block *sb, int read_only)
 			!read_only)
 		return -EIO;
 
-	mutex_init(&super->s_dirop_mutex);
-	mutex_init(&super->s_object_alias_mutex);
-	INIT_LIST_HEAD(&super->s_freeing_list);
-
 	ret = logfs_init_rw(sb);
 	if (ret)
 		return ret;
@@ -601,6 +597,10 @@ static struct dentry *logfs_mount(struct file_system_type *type, int flags,
 	if (!super)
 		return ERR_PTR(-ENOMEM);
 
+	mutex_init(&super->s_dirop_mutex);
+	mutex_init(&super->s_object_alias_mutex);
+	INIT_LIST_HEAD(&super->s_freeing_list);
+
 	if (!devname)
 		err = logfs_get_sb_bdev(super, type, devname);
 	else if (strncmp(devname, "mtd", 3))
diff --git a/fs/mbcache.c b/fs/mbcache.c
index a25444ab2ba..2f174be0655 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -542,7 +542,7 @@ __mb_cache_entry_find(struct list_head *l, struct list_head *head,
  * mb_cache_entry_find_first()
  *
  * Find the first cache entry on a given device with a certain key in
- * an additional index. Additonal matches can be found with
+ * an additional index. Additional matches can be found with
  * mb_cache_entry_find_next(). Returns NULL if no match was found. The
  * returned cache entry is locked for shared access ("multiple readers").
  *
diff --git a/fs/namei.c b/fs/namei.c
index 3cb616d38d9..e3c4f112ebf 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -70,7 +70,7 @@
  * name indicated by the symlink. The old code always complained that the
  * name already exists, due to not following the symlink even if its target
  * is nonexistent.  The new semantics affects also mknod() and link() when
- * the name is a symlink pointing to a non-existant name.
+ * the name is a symlink pointing to a non-existent name.
  *
  * I don't know which semantics is the right one, since I have no access
  * to standards. But I found by trial that HP-UX 9.0 has the full "new"
@@ -179,7 +179,7 @@ EXPORT_SYMBOL(putname);
 static int acl_permission_check(struct inode *inode, int mask, unsigned int flags,
 		int (*check_acl)(struct inode *inode, int mask, unsigned int flags))
 {
-	umode_t			mode = inode->i_mode;
+	unsigned int mode = inode->i_mode;
 
 	mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
 
@@ -697,6 +697,7 @@ static __always_inline void set_root_rcu(struct nameidata *nd)
 		do {
 			seq = read_seqcount_begin(&fs->seq);
 			nd->root = fs->root;
+			nd->seq = __read_seqcount_begin(&nd->root.dentry->d_seq);
 		} while (read_seqcount_retry(&fs->seq, seq));
 	}
 }
diff --git a/fs/namespace.c b/fs/namespace.c
index 7dba2ed0342..d99bcf59e4c 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1030,18 +1030,6 @@ const struct seq_operations mounts_op = {
 	.show	= show_vfsmnt
 };
 
-static int uuid_is_nil(u8 *uuid)
-{
-	int i;
-	u8  *cp = (u8 *)uuid;
-
-	for (i = 0; i < 16; i++) {
-		if (*cp++)
-			return 0;
-	}
-	return 1;
-}
-
 static int show_mountinfo(struct seq_file *m, void *v)
 {
 	struct proc_mounts *p = m->private;
@@ -1085,10 +1073,6 @@ static int show_mountinfo(struct seq_file *m, void *v)
 	if (IS_MNT_UNBINDABLE(mnt))
 		seq_puts(m, " unbindable");
 
-	if (!uuid_is_nil(mnt->mnt_sb->s_uuid))
-		/* print the uuid */
-		seq_printf(m, " uuid:%pU", mnt->mnt_sb->s_uuid);
-
 	/* Filesystem specific data */
 	seq_puts(m, " - ");
 	show_type(m, sb);
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 00a1d1c3d3a..0250e4ce489 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -596,7 +596,7 @@ static int ncp_fill_super(struct super_block *sb, void *raw_data, int silent)
 /*	server->priv.data = NULL;		*/
 
 	server->m = data;
-	/* Althought anything producing this is buggy, it happens
+	/* Although anything producing this is buggy, it happens
 	   now because of PATH_MAX changes.. */
 	if (server->m.time_out < 1) {
 		server->m.time_out = 10;
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 14e0f9371d1..00ecf62ce7c 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -241,7 +241,7 @@ static __be32 decode_layoutrecall_args(struct svc_rqst *rqstp,
 
 	args->cbl_layout_type = ntohl(*p++);
 	/* Depite the spec's xdr, iomode really belongs in the FILE switch,
-	 * as it is unuseable and ignored with the other types.
+	 * as it is unusable and ignored with the other types.
 	 */
 	iomode = ntohl(*p++);
 	args->cbl_layoutchanged = ntohl(*p++);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 3ac5bd695e5..2f093ed1698 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -301,7 +301,7 @@ nfs_file_mmap(struct file * file, struct vm_area_struct * vma)
  * disk, but it retrieves and clears ctx->error after synching, despite
  * the two being set at the same time in nfs_context_set_write_error().
  * This is because the former is used to notify the _next_ call to
- * nfs_file_write() that a write error occured, and hence cause it to
+ * nfs_file_write() that a write error occurred, and hence cause it to
  * fall back to doing a synchronous write.
  */
 static int
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 9166fcb66da..1f063bacd28 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -119,7 +119,7 @@ Elong:
 }
 
 #ifdef CONFIG_NFS_V4
-static rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *flavors, struct inode *inode)
+static rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *flavors)
 {
 	struct gss_api_mech *mech;
 	struct xdr_netobj oid;
@@ -148,67 +148,64 @@ static rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *flavors,
 	return pseudoflavor;
 }
 
-static rpc_authflavor_t nfs_negotiate_security(const struct dentry *parent, const struct dentry *dentry)
+static int nfs_negotiate_security(const struct dentry *parent,
+				  const struct dentry *dentry,
+				  rpc_authflavor_t *flavor)
 {
-	int status = 0;
 	struct page *page;
 	struct nfs4_secinfo_flavors *flavors;
 	int (*secinfo)(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *);
-	rpc_authflavor_t flavor = RPC_AUTH_UNIX;
+	int ret = -EPERM;
 
 	secinfo = NFS_PROTO(parent->d_inode)->secinfo;
 	if (secinfo != NULL) {
 		page = alloc_page(GFP_KERNEL);
 		if (!page) {
-			status = -ENOMEM;
+			ret = -ENOMEM;
 			goto out;
 		}
 		flavors = page_address(page);
-		status = secinfo(parent->d_inode, &dentry->d_name, flavors);
-		flavor = nfs_find_best_sec(flavors, dentry->d_inode);
+		ret = secinfo(parent->d_inode, &dentry->d_name, flavors);
+		*flavor = nfs_find_best_sec(flavors);
 		put_page(page);
 	}
 
-	return flavor;
-
 out:
-	status = -ENOMEM;
-	return status;
+	return ret;
 }
 
-static rpc_authflavor_t nfs_lookup_with_sec(struct nfs_server *server, struct dentry *parent,
-				     struct dentry *dentry, struct path *path,
-				     struct nfs_fh *fh, struct nfs_fattr *fattr)
+static int nfs_lookup_with_sec(struct nfs_server *server, struct dentry *parent,
+			       struct dentry *dentry, struct path *path,
+			       struct nfs_fh *fh, struct nfs_fattr *fattr,
+			       rpc_authflavor_t *flavor)
 {
-	rpc_authflavor_t flavor;
 	struct rpc_clnt *clone;
 	struct rpc_auth *auth;
 	int err;
 
-	flavor = nfs_negotiate_security(parent, path->dentry);
-	if (flavor < 0)
+	err = nfs_negotiate_security(parent, path->dentry, flavor);
+	if (err < 0)
 		goto out;
 	clone  = rpc_clone_client(server->client);
-	auth   = rpcauth_create(flavor, clone);
+	auth   = rpcauth_create(*flavor, clone);
 	if (!auth) {
-		flavor = -EIO;
+		err = -EIO;
 		goto out_shutdown;
 	}
 	err = server->nfs_client->rpc_ops->lookup(clone, parent->d_inode,
 						  &path->dentry->d_name,
 						  fh, fattr);
-	if (err < 0)
-		flavor = err;
 out_shutdown:
 	rpc_shutdown_client(clone);
 out:
-	return flavor;
+	return err;
 }
 #else /* CONFIG_NFS_V4 */
-static inline rpc_authflavor_t nfs_lookup_with_sec(struct nfs_server *server,
-				     struct dentry *parent, struct dentry *dentry,
-				     struct path *path, struct nfs_fh *fh,
-				     struct nfs_fattr *fattr)
+static inline int nfs_lookup_with_sec(struct nfs_server *server,
+				      struct dentry *parent, struct dentry *dentry,
+				      struct path *path, struct nfs_fh *fh,
+				      struct nfs_fattr *fattr,
+				      rpc_authflavor_t *flavor)
 {
 	return -EPERM;
 }
@@ -234,7 +231,7 @@ struct vfsmount *nfs_d_automount(struct path *path)
 	struct nfs_fh *fh = NULL;
 	struct nfs_fattr *fattr = NULL;
 	int err;
-	rpc_authflavor_t flavor = 1;
+	rpc_authflavor_t flavor = RPC_AUTH_UNIX;
 
 	dprintk("--> nfs_d_automount()\n");
 
@@ -255,13 +252,8 @@ struct vfsmount *nfs_d_automount(struct path *path)
 	err = server->nfs_client->rpc_ops->lookup(server->client, parent->d_inode,
 						  &path->dentry->d_name,
 						  fh, fattr);
-	if (err == -EPERM) {
-		flavor = nfs_lookup_with_sec(server, parent, path->dentry, path, fh, fattr);
-		if (flavor < 0)
-			err = flavor;
-		else
-			err = 0;
-	}
+	if (err == -EPERM && NFS_PROTO(parent->d_inode)->secinfo != NULL)
+		err = nfs_lookup_with_sec(server, parent, path->dentry, path, fh, fattr, &flavor);
 	dput(parent);
 	if (err != 0) {
 		mnt = ERR_PTR(err);
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index e1c261ddd65..c4a69833dd0 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -47,6 +47,7 @@ enum nfs4_client_state {
 	NFS4CLNT_LAYOUTRECALL,
 	NFS4CLNT_SESSION_RESET,
 	NFS4CLNT_RECALL_SLOT,
+	NFS4CLNT_LEASE_CONFIRM,
 };
 
 enum nfs4_session_state {
diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c
index 6f8192f4cfc..be79dc9f386 100644
--- a/fs/nfs/nfs4filelayout.c
+++ b/fs/nfs/nfs4filelayout.c
@@ -117,6 +117,8 @@ static int filelayout_async_handle_error(struct rpc_task *task,
 	case -EKEYEXPIRED:
 		rpc_delay(task, FILELAYOUT_POLL_RETRY_MAX);
 		break;
+	case -NFS4ERR_RETRY_UNCACHED_REP:
+		break;
 	default:
 		dprintk("%s DS error. Retry through MDS %d\n", __func__,
 			task->tk_status);
@@ -416,7 +418,8 @@ static int
 filelayout_check_layout(struct pnfs_layout_hdr *lo,
 			struct nfs4_filelayout_segment *fl,
 			struct nfs4_layoutget_res *lgr,
-			struct nfs4_deviceid *id)
+			struct nfs4_deviceid *id,
+			gfp_t gfp_flags)
 {
 	struct nfs4_file_layout_dsaddr *dsaddr;
 	int status = -EINVAL;
@@ -439,7 +442,7 @@ filelayout_check_layout(struct pnfs_layout_hdr *lo,
 	/* find and reference the deviceid */
 	dsaddr = nfs4_fl_find_get_deviceid(id);
 	if (dsaddr == NULL) {
-		dsaddr = get_device_info(lo->plh_inode, id);
+		dsaddr = get_device_info(lo->plh_inode, id, gfp_flags);
 		if (dsaddr == NULL)
 			goto out;
 	}
@@ -500,7 +503,8 @@ static int
 filelayout_decode_layout(struct pnfs_layout_hdr *flo,
 			 struct nfs4_filelayout_segment *fl,
 			 struct nfs4_layoutget_res *lgr,
-			 struct nfs4_deviceid *id)
+			 struct nfs4_deviceid *id,
+			 gfp_t gfp_flags)
 {
 	struct xdr_stream stream;
 	struct xdr_buf buf = {
@@ -516,7 +520,7 @@ filelayout_decode_layout(struct pnfs_layout_hdr *flo,
 
 	dprintk("%s: set_layout_map Begin\n", __func__);
 
-	scratch = alloc_page(GFP_KERNEL);
+	scratch = alloc_page(gfp_flags);
 	if (!scratch)
 		return -ENOMEM;
 
@@ -554,13 +558,13 @@ filelayout_decode_layout(struct pnfs_layout_hdr *flo,
 		goto out_err;
 
 	fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *),
-			       GFP_KERNEL);
+			       gfp_flags);
 	if (!fl->fh_array)
 		goto out_err;
 
 	for (i = 0; i < fl->num_fh; i++) {
 		/* Do we want to use a mempool here? */
-		fl->fh_array[i] = kmalloc(sizeof(struct nfs_fh), GFP_KERNEL);
+		fl->fh_array[i] = kmalloc(sizeof(struct nfs_fh), gfp_flags);
 		if (!fl->fh_array[i])
 			goto out_err_free;
 
@@ -605,19 +609,20 @@ filelayout_free_lseg(struct pnfs_layout_segment *lseg)
 
 static struct pnfs_layout_segment *
 filelayout_alloc_lseg(struct pnfs_layout_hdr *layoutid,
-		      struct nfs4_layoutget_res *lgr)
+		      struct nfs4_layoutget_res *lgr,
+		      gfp_t gfp_flags)
 {
 	struct nfs4_filelayout_segment *fl;
 	int rc;
 	struct nfs4_deviceid id;
 
 	dprintk("--> %s\n", __func__);
-	fl = kzalloc(sizeof(*fl), GFP_KERNEL);
+	fl = kzalloc(sizeof(*fl), gfp_flags);
 	if (!fl)
 		return NULL;
 
-	rc = filelayout_decode_layout(layoutid, fl, lgr, &id);
-	if (rc != 0 || filelayout_check_layout(layoutid, fl, lgr, &id)) {
+	rc = filelayout_decode_layout(layoutid, fl, lgr, &id, gfp_flags);
+	if (rc != 0 || filelayout_check_layout(layoutid, fl, lgr, &id, gfp_flags)) {
 		_filelayout_free_lseg(fl);
 		return NULL;
 	}
@@ -633,7 +638,7 @@ filelayout_alloc_lseg(struct pnfs_layout_hdr *layoutid,
 		int size = (fl->stripe_type == STRIPE_SPARSE) ?
 			fl->dsaddr->ds_num : fl->dsaddr->stripe_count;
 
-		fl->commit_buckets = kcalloc(size, sizeof(struct list_head), GFP_KERNEL);
+		fl->commit_buckets = kcalloc(size, sizeof(struct list_head), gfp_flags);
 		if (!fl->commit_buckets) {
 			filelayout_free_lseg(&fl->generic_hdr);
 			return NULL;
diff --git a/fs/nfs/nfs4filelayout.h b/fs/nfs/nfs4filelayout.h
index 085a354e0f0..2b461d77b43 100644
--- a/fs/nfs/nfs4filelayout.h
+++ b/fs/nfs/nfs4filelayout.h
@@ -33,7 +33,7 @@
 #include "pnfs.h"
 
 /*
- * Field testing shows we need to support upto 4096 stripe indices.
+ * Field testing shows we need to support up to 4096 stripe indices.
  * We store each index as a u8 (u32 on the wire) to keep the memory footprint
  * reasonable. This in turn means we support a maximum of 256
  * RFC 5661 multipath_list4 structures.
@@ -104,6 +104,6 @@ extern struct nfs4_file_layout_dsaddr *
 nfs4_fl_find_get_deviceid(struct nfs4_deviceid *dev_id);
 extern void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr);
 struct nfs4_file_layout_dsaddr *
-get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id);
+get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags);
 
 #endif /* FS_NFS_NFS4FILELAYOUT_H */
diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c
index de5350f2b24..db07c7af139 100644
--- a/fs/nfs/nfs4filelayoutdev.c
+++ b/fs/nfs/nfs4filelayoutdev.c
@@ -225,11 +225,11 @@ nfs4_fl_free_deviceid(struct nfs4_file_layout_dsaddr *dsaddr)
 }
 
 static struct nfs4_pnfs_ds *
-nfs4_pnfs_ds_add(struct inode *inode, u32 ip_addr, u32 port)
+nfs4_pnfs_ds_add(struct inode *inode, u32 ip_addr, u32 port, gfp_t gfp_flags)
 {
 	struct nfs4_pnfs_ds *tmp_ds, *ds;
 
-	ds = kzalloc(sizeof(*tmp_ds), GFP_KERNEL);
+	ds = kzalloc(sizeof(*tmp_ds), gfp_flags);
 	if (!ds)
 		goto out;
 
@@ -261,7 +261,7 @@ out:
  * Currently only support ipv4, and one multi-path address.
  */
 static struct nfs4_pnfs_ds *
-decode_and_add_ds(struct xdr_stream *streamp, struct inode *inode)
+decode_and_add_ds(struct xdr_stream *streamp, struct inode *inode, gfp_t gfp_flags)
 {
 	struct nfs4_pnfs_ds *ds = NULL;
 	char *buf;
@@ -303,7 +303,7 @@ decode_and_add_ds(struct xdr_stream *streamp, struct inode *inode)
 			rlen);
 		goto out_err;
 	}
-	buf = kmalloc(rlen + 1, GFP_KERNEL);
+	buf = kmalloc(rlen + 1, gfp_flags);
 	if (!buf) {
 		dprintk("%s: Not enough memory\n", __func__);
 		goto out_err;
@@ -333,7 +333,7 @@ decode_and_add_ds(struct xdr_stream *streamp, struct inode *inode)
 	sscanf(pstr, "-%d-%d", &tmp[0], &tmp[1]);
 	port = htons((tmp[0] << 8) | (tmp[1]));
 
-	ds = nfs4_pnfs_ds_add(inode, ip_addr, port);
+	ds = nfs4_pnfs_ds_add(inode, ip_addr, port, gfp_flags);
 	dprintk("%s: Decoded address and port %s\n", __func__, buf);
 out_free:
 	kfree(buf);
@@ -343,7 +343,7 @@ out_err:
 
 /* Decode opaque device data and return the result */
 static struct nfs4_file_layout_dsaddr*
-decode_device(struct inode *ino, struct pnfs_device *pdev)
+decode_device(struct inode *ino, struct pnfs_device *pdev, gfp_t gfp_flags)
 {
 	int i;
 	u32 cnt, num;
@@ -362,7 +362,7 @@ decode_device(struct inode *ino, struct pnfs_device *pdev)
 	struct page *scratch;
 
 	/* set up xdr stream */
-	scratch = alloc_page(GFP_KERNEL);
+	scratch = alloc_page(gfp_flags);
 	if (!scratch)
 		goto out_err;
 
@@ -384,7 +384,7 @@ decode_device(struct inode *ino, struct pnfs_device *pdev)
 	}
 
 	/* read stripe indices */
-	stripe_indices = kcalloc(cnt, sizeof(u8), GFP_KERNEL);
+	stripe_indices = kcalloc(cnt, sizeof(u8), gfp_flags);
 	if (!stripe_indices)
 		goto out_err_free_scratch;
 
@@ -423,7 +423,7 @@ decode_device(struct inode *ino, struct pnfs_device *pdev)
 
 	dsaddr = kzalloc(sizeof(*dsaddr) +
 			(sizeof(struct nfs4_pnfs_ds *) * (num - 1)),
-			GFP_KERNEL);
+			gfp_flags);
 	if (!dsaddr)
 		goto out_err_free_stripe_indices;
 
@@ -452,7 +452,7 @@ decode_device(struct inode *ino, struct pnfs_device *pdev)
 		for (j = 0; j < mp_count; j++) {
 			if (j == 0) {
 				dsaddr->ds_list[i] = decode_and_add_ds(&stream,
-					ino);
+					ino, gfp_flags);
 				if (dsaddr->ds_list[i] == NULL)
 					goto out_err_free_deviceid;
 			} else {
@@ -503,12 +503,12 @@ out_err:
  * available devices.
  */
 static struct nfs4_file_layout_dsaddr *
-decode_and_add_device(struct inode *inode, struct pnfs_device *dev)
+decode_and_add_device(struct inode *inode, struct pnfs_device *dev, gfp_t gfp_flags)
 {
 	struct nfs4_file_layout_dsaddr *d, *new;
 	long hash;
 
-	new = decode_device(inode, dev);
+	new = decode_device(inode, dev, gfp_flags);
 	if (!new) {
 		printk(KERN_WARNING "%s: Could not decode or add device\n",
 			__func__);
@@ -537,7 +537,7 @@ decode_and_add_device(struct inode *inode, struct pnfs_device *dev)
  * of available devices, and return it.
  */
 struct nfs4_file_layout_dsaddr *
-get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id)
+get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags)
 {
 	struct pnfs_device *pdev = NULL;
 	u32 max_resp_sz;
@@ -556,17 +556,17 @@ get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id)
 	dprintk("%s inode %p max_resp_sz %u max_pages %d\n",
 		__func__, inode, max_resp_sz, max_pages);
 
-	pdev = kzalloc(sizeof(struct pnfs_device), GFP_KERNEL);
+	pdev = kzalloc(sizeof(struct pnfs_device), gfp_flags);
 	if (pdev == NULL)
 		return NULL;
 
-	pages = kzalloc(max_pages * sizeof(struct page *), GFP_KERNEL);
+	pages = kzalloc(max_pages * sizeof(struct page *), gfp_flags);
 	if (pages == NULL) {
 		kfree(pdev);
 		return NULL;
 	}
 	for (i = 0; i < max_pages; i++) {
-		pages[i] = alloc_page(GFP_KERNEL);
+		pages[i] = alloc_page(gfp_flags);
 		if (!pages[i])
 			goto out_free;
 	}
@@ -587,7 +587,7 @@ get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id)
 	 * Found new device, need to decode it and then add it to the
 	 * list of known devices for this mountpoint.
 	 */
-	dsaddr = decode_and_add_device(inode, pdev);
+	dsaddr = decode_and_add_device(inode, pdev, gfp_flags);
 out_free:
 	for (i = 0; i < max_pages; i++)
 		__free_page(pages[i]);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index dfd1e6d7e6c..cf1b339c393 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -46,6 +46,7 @@
 #include <linux/nfs4.h>
 #include <linux/nfs_fs.h>
 #include <linux/nfs_page.h>
+#include <linux/nfs_mount.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/module.h>
@@ -299,6 +300,7 @@ static int nfs4_handle_exception(struct nfs_server *server, int errorcode, struc
 			ret = nfs4_delay(server->client, &exception->timeout);
 			if (ret != 0)
 				break;
+		case -NFS4ERR_RETRY_UNCACHED_REP:
 		case -NFS4ERR_OLD_STATEID:
 			exception->retry = 1;
 			break;
@@ -443,8 +445,8 @@ static int nfs41_sequence_done(struct rpc_task *task, struct nfs4_sequence_res *
 	if (res->sr_status == 1)
 		res->sr_status = NFS_OK;
 
-	/* -ERESTARTSYS can result in skipping nfs41_sequence_setup */
-	if (!res->sr_slot)
+	/* don't increment the sequence number if the task wasn't sent */
+	if (!RPC_WAS_SENT(task))
 		goto out;
 
 	/* Check the SEQUENCE operation status */
@@ -2185,9 +2187,14 @@ static int nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
 	struct nfs4_exception exception = { };
 	int err;
 	do {
-		err = nfs4_handle_exception(server,
-				_nfs4_lookup_root(server, fhandle, info),
-				&exception);
+		err = _nfs4_lookup_root(server, fhandle, info);
+		switch (err) {
+		case 0:
+		case -NFS4ERR_WRONGSEC:
+			break;
+		default:
+			err = nfs4_handle_exception(server, err, &exception);
+		}
 	} while (exception.retry);
 	return err;
 }
@@ -2204,31 +2211,51 @@ static int nfs4_lookup_root_sec(struct nfs_server *server, struct nfs_fh *fhandl
 		goto out;
 	}
 	ret = nfs4_lookup_root(server, fhandle, info);
-	if (ret < 0)
-		ret = -EAGAIN;
 out:
 	return ret;
 }
 
-/*
- * get the file handle for the "/" directory on the server
- */
-static int nfs4_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle,
+static int nfs4_find_root_sec(struct nfs_server *server, struct nfs_fh *fhandle,
 			      struct nfs_fsinfo *info)
 {
 	int i, len, status = 0;
-	rpc_authflavor_t flav_array[NFS_MAX_SECFLAVORS + 2];
+	rpc_authflavor_t flav_array[NFS_MAX_SECFLAVORS];
 
-	flav_array[0] = RPC_AUTH_UNIX;
-	len = gss_mech_list_pseudoflavors(&flav_array[1]);
-	flav_array[1+len] = RPC_AUTH_NULL;
-	len += 2;
+	len = gss_mech_list_pseudoflavors(&flav_array[0]);
+	flav_array[len] = RPC_AUTH_NULL;
+	len += 1;
 
 	for (i = 0; i < len; i++) {
 		status = nfs4_lookup_root_sec(server, fhandle, info, flav_array[i]);
-		if (status == 0)
-			break;
+		if (status == -NFS4ERR_WRONGSEC || status == -EACCES)
+			continue;
+		break;
 	}
+	/*
+	 * -EACCESS could mean that the user doesn't have correct permissions
+	 * to access the mount.  It could also mean that we tried to mount
+	 * with a gss auth flavor, but rpc.gssd isn't running.  Either way,
+	 * existing mount programs don't handle -EACCES very well so it should
+	 * be mapped to -EPERM instead.
+	 */
+	if (status == -EACCES)
+		status = -EPERM;
+	return status;
+}
+
+/*
+ * get the file handle for the "/" directory on the server
+ */
+static int nfs4_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle,
+			      struct nfs_fsinfo *info)
+{
+	int status = nfs4_lookup_root(server, fhandle, info);
+	if ((status == -NFS4ERR_WRONGSEC) && !(server->flags & NFS_MOUNT_SECFLAVOUR))
+		/*
+		 * A status of -NFS4ERR_WRONGSEC will be mapped to -EPERM
+		 * by nfs4_map_errors() as this function exits.
+		 */
+		status = nfs4_find_root_sec(server, fhandle, info);
 	if (status == 0)
 		status = nfs4_server_capabilities(server, fhandle);
 	if (status == 0)
@@ -3669,6 +3696,7 @@ nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server,
 			rpc_delay(task, NFS4_POLL_RETRY_MAX);
 			task->tk_status = 0;
 			return -EAGAIN;
+		case -NFS4ERR_RETRY_UNCACHED_REP:
 		case -NFS4ERR_OLD_STATEID:
 			task->tk_status = 0;
 			return -EAGAIN;
@@ -3725,21 +3753,20 @@ int nfs4_proc_setclientid(struct nfs_client *clp, u32 program,
 				sizeof(setclientid.sc_uaddr), "%s.%u.%u",
 				clp->cl_ipaddr, port >> 8, port & 255);
 
-		status = rpc_call_sync(clp->cl_rpcclient, &msg, 0);
+		status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
 		if (status != -NFS4ERR_CLID_INUSE)
 			break;
-		if (signalled())
+		if (loop != 0) {
+			++clp->cl_id_uniquifier;
 			break;
-		if (loop++ & 1)
-			ssleep(clp->cl_lease_time / HZ + 1);
-		else
-			if (++clp->cl_id_uniquifier == 0)
-				break;
+		}
+		++loop;
+		ssleep(clp->cl_lease_time / HZ + 1);
 	}
 	return status;
 }
 
-static int _nfs4_proc_setclientid_confirm(struct nfs_client *clp,
+int nfs4_proc_setclientid_confirm(struct nfs_client *clp,
 		struct nfs4_setclientid_res *arg,
 		struct rpc_cred *cred)
 {
@@ -3754,7 +3781,7 @@ static int _nfs4_proc_setclientid_confirm(struct nfs_client *clp,
 	int status;
 
 	now = jiffies;
-	status = rpc_call_sync(clp->cl_rpcclient, &msg, 0);
+	status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
 	if (status == 0) {
 		spin_lock(&clp->cl_lock);
 		clp->cl_lease_time = fsinfo.lease_time * HZ;
@@ -3764,26 +3791,6 @@ static int _nfs4_proc_setclientid_confirm(struct nfs_client *clp,
 	return status;
 }
 
-int nfs4_proc_setclientid_confirm(struct nfs_client *clp,
-		struct nfs4_setclientid_res *arg,
-		struct rpc_cred *cred)
-{
-	long timeout = 0;
-	int err;
-	do {
-		err = _nfs4_proc_setclientid_confirm(clp, arg, cred);
-		switch (err) {
-			case 0:
-				return err;
-			case -NFS4ERR_RESOURCE:
-				/* The IBM lawyers misread another document! */
-			case -NFS4ERR_DELAY:
-				err = nfs4_delay(clp->cl_rpcclient, &timeout);
-		}
-	} while (err == 0);
-	return err;
-}
-
 struct nfs4_delegreturndata {
 	struct nfs4_delegreturnargs args;
 	struct nfs4_delegreturnres res;
@@ -4788,7 +4795,7 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred)
 				init_utsname()->domainname,
 				clp->cl_rpcclient->cl_auth->au_flavor);
 
-	status = rpc_call_sync(clp->cl_rpcclient, &msg, 0);
+	status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
 	if (!status)
 		status = nfs4_check_cl_exchange_flags(clp->cl_exchange_flags);
 	dprintk("<-- %s status= %d\n", __func__, status);
@@ -4839,6 +4846,8 @@ static void nfs4_get_lease_time_done(struct rpc_task *task, void *calldata)
 		dprintk("%s Retry: tk_status %d\n", __func__, task->tk_status);
 		rpc_delay(task, NFS4_POLL_RETRY_MIN);
 		task->tk_status = 0;
+		/* fall through */
+	case -NFS4ERR_RETRY_UNCACHED_REP:
 		nfs_restart_rpc(task, data->clp);
 		return;
 	}
@@ -4871,7 +4880,8 @@ int nfs4_proc_get_lease_time(struct nfs_client *clp, struct nfs_fsinfo *fsinfo)
 		.rpc_client = clp->cl_rpcclient,
 		.rpc_message = &msg,
 		.callback_ops = &nfs4_get_lease_time_ops,
-		.callback_data = &data
+		.callback_data = &data,
+		.flags = RPC_TASK_TIMEOUT,
 	};
 	int status;
 
@@ -5173,7 +5183,7 @@ static int _nfs4_proc_create_session(struct nfs_client *clp)
 	nfs4_init_channel_attrs(&args);
 	args.flags = (SESSION4_PERSIST | SESSION4_BACK_CHAN);
 
-	status = rpc_call_sync(session->clp->cl_rpcclient, &msg, 0);
+	status = rpc_call_sync(session->clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
 
 	if (!status)
 		/* Verify the session's negotiated channel_attrs values */
@@ -5196,20 +5206,10 @@ int nfs4_proc_create_session(struct nfs_client *clp)
 	int status;
 	unsigned *ptr;
 	struct nfs4_session *session = clp->cl_session;
-	long timeout = 0;
-	int err;
 
 	dprintk("--> %s clp=%p session=%p\n", __func__, clp, session);
 
-	do {
-		status = _nfs4_proc_create_session(clp);
-		if (status == -NFS4ERR_DELAY) {
-			err = nfs4_delay(clp->cl_rpcclient, &timeout);
-			if (err)
-				status = err;
-		}
-	} while (status == -NFS4ERR_DELAY);
-
+	status = _nfs4_proc_create_session(clp);
 	if (status)
 		goto out;
 
@@ -5250,7 +5250,7 @@ int nfs4_proc_destroy_session(struct nfs4_session *session)
 	msg.rpc_argp = session;
 	msg.rpc_resp = NULL;
 	msg.rpc_cred = NULL;
-	status = rpc_call_sync(session->clp->cl_rpcclient, &msg, 0);
+	status = rpc_call_sync(session->clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
 
 	if (status)
 		printk(KERN_WARNING
@@ -5483,6 +5483,8 @@ static int nfs41_reclaim_complete_handle_errors(struct rpc_task *task, struct nf
 		break;
 	case -NFS4ERR_DELAY:
 		rpc_delay(task, NFS4_POLL_RETRY_MAX);
+		/* fall through */
+	case -NFS4ERR_RETRY_UNCACHED_REP:
 		return -EAGAIN;
 	default:
 		nfs4_schedule_lease_recovery(clp);
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index a6804f704d9..036f5adc9e1 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -64,10 +64,15 @@ static LIST_HEAD(nfs4_clientid_list);
 
 int nfs4_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
 {
-	struct nfs4_setclientid_res clid;
+	struct nfs4_setclientid_res clid = {
+		.clientid = clp->cl_clientid,
+		.confirm = clp->cl_confirm,
+	};
 	unsigned short port;
 	int status;
 
+	if (test_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state))
+		goto do_confirm;
 	port = nfs_callback_tcpport;
 	if (clp->cl_addr.ss_family == AF_INET6)
 		port = nfs_callback_tcpport6;
@@ -75,10 +80,14 @@ int nfs4_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
 	status = nfs4_proc_setclientid(clp, NFS4_CALLBACK, port, cred, &clid);
 	if (status != 0)
 		goto out;
+	clp->cl_clientid = clid.clientid;
+	clp->cl_confirm = clid.confirm;
+	set_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+do_confirm:
 	status = nfs4_proc_setclientid_confirm(clp, &clid, cred);
 	if (status != 0)
 		goto out;
-	clp->cl_clientid = clid.clientid;
+	clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
 	nfs4_schedule_state_renewal(clp);
 out:
 	return status;
@@ -230,13 +239,18 @@ int nfs41_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
 {
 	int status;
 
+	if (test_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state))
+		goto do_confirm;
 	nfs4_begin_drain_session(clp);
 	status = nfs4_proc_exchange_id(clp, cred);
 	if (status != 0)
 		goto out;
+	set_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+do_confirm:
 	status = nfs4_proc_create_session(clp);
 	if (status != 0)
 		goto out;
+	clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
 	nfs41_setup_state_renewal(clp);
 	nfs_mark_client_ready(clp, NFS_CS_READY);
 out:
@@ -1584,20 +1598,23 @@ static int nfs4_recall_slot(struct nfs_client *clp) { return 0; }
  */
 static void nfs4_set_lease_expired(struct nfs_client *clp, int status)
 {
-	if (nfs4_has_session(clp)) {
-		switch (status) {
-		case -NFS4ERR_DELAY:
-		case -NFS4ERR_CLID_INUSE:
-		case -EAGAIN:
-			break;
+	switch (status) {
+	case -NFS4ERR_CLID_INUSE:
+	case -NFS4ERR_STALE_CLIENTID:
+		clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+		break;
+	case -NFS4ERR_DELAY:
+	case -ETIMEDOUT:
+	case -EAGAIN:
+		ssleep(1);
+		break;
 
-		case -EKEYEXPIRED:
-			nfs4_warn_keyexpired(clp->cl_hostname);
-		case -NFS4ERR_NOT_SAME: /* FixMe: implement recovery
-					 * in nfs4_exchange_id */
-		default:
-			return;
-		}
+	case -EKEYEXPIRED:
+		nfs4_warn_keyexpired(clp->cl_hostname);
+	case -NFS4ERR_NOT_SAME: /* FixMe: implement recovery
+				 * in nfs4_exchange_id */
+	default:
+		return;
 	}
 	set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
 }
@@ -1607,7 +1624,7 @@ static void nfs4_state_manager(struct nfs_client *clp)
 	int status = 0;
 
 	/* Ensure exclusive access to NFSv4 state */
-	for(;;) {
+	do {
 		if (test_and_clear_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state)) {
 			/* We're going to have to re-establish a clientid */
 			status = nfs4_reclaim_lease(clp);
@@ -1691,7 +1708,7 @@ static void nfs4_state_manager(struct nfs_client *clp)
 			break;
 		if (test_and_set_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) != 0)
 			break;
-	}
+	} while (atomic_read(&clp->cl_count) > 1);
 	return;
 out_error:
 	printk(KERN_WARNING "Error: state manager failed on NFSv4 server %s"
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index dddfb5795d7..c3ccd2c4683 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -1452,26 +1452,25 @@ static void encode_read(struct xdr_stream *xdr, const struct nfs_readargs *args,
 
 static void encode_readdir(struct xdr_stream *xdr, const struct nfs4_readdir_arg *readdir, struct rpc_rqst *req, struct compound_hdr *hdr)
 {
-	uint32_t attrs[2] = {0, 0};
+	uint32_t attrs[2] = {
+		FATTR4_WORD0_RDATTR_ERROR,
+		FATTR4_WORD1_MOUNTED_ON_FILEID,
+	};
 	uint32_t dircount = readdir->count >> 1;
 	__be32 *p;
 
 	if (readdir->plus) {
 		attrs[0] |= FATTR4_WORD0_TYPE|FATTR4_WORD0_CHANGE|FATTR4_WORD0_SIZE|
-			FATTR4_WORD0_FSID|FATTR4_WORD0_FILEHANDLE;
+			FATTR4_WORD0_FSID|FATTR4_WORD0_FILEHANDLE|FATTR4_WORD0_FILEID;
 		attrs[1] |= FATTR4_WORD1_MODE|FATTR4_WORD1_NUMLINKS|FATTR4_WORD1_OWNER|
 			FATTR4_WORD1_OWNER_GROUP|FATTR4_WORD1_RAWDEV|
 			FATTR4_WORD1_SPACE_USED|FATTR4_WORD1_TIME_ACCESS|
 			FATTR4_WORD1_TIME_METADATA|FATTR4_WORD1_TIME_MODIFY;
 		dircount >>= 1;
 	}
-	attrs[0] |= FATTR4_WORD0_RDATTR_ERROR|FATTR4_WORD0_FILEID;
-	attrs[1] |= FATTR4_WORD1_MOUNTED_ON_FILEID;
-	/* Switch to mounted_on_fileid if the server supports it */
-	if (readdir->bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID)
-		attrs[0] &= ~FATTR4_WORD0_FILEID;
-	else
-		attrs[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
+	/* Use mounted_on_fileid only if the server supports it */
+	if (!(readdir->bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID))
+		attrs[0] |= FATTR4_WORD0_FILEID;
 
 	p = reserve_space(xdr, 12+NFS4_VERIFIER_SIZE+20);
 	*p++ = cpu_to_be32(OP_READDIR);
@@ -3140,7 +3139,7 @@ static int decode_attr_mounted_on_fileid(struct xdr_stream *xdr, uint32_t *bitma
 			goto out_overflow;
 		xdr_decode_hyper(p, fileid);
 		bitmap[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
-		ret = NFS_ATTR_FATTR_FILEID;
+		ret = NFS_ATTR_FATTR_MOUNTED_ON_FILEID;
 	}
 	dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
 	return ret;
@@ -4002,7 +4001,6 @@ static int decode_getfattr_attrs(struct xdr_stream *xdr, uint32_t *bitmap,
 {
 	int status;
 	umode_t fmode = 0;
-	uint64_t fileid;
 	uint32_t type;
 
 	status = decode_attr_type(xdr, bitmap, &type);
@@ -4101,13 +4099,10 @@ static int decode_getfattr_attrs(struct xdr_stream *xdr, uint32_t *bitmap,
 		goto xdr_error;
 	fattr->valid |= status;
 
-	status = decode_attr_mounted_on_fileid(xdr, bitmap, &fileid);
+	status = decode_attr_mounted_on_fileid(xdr, bitmap, &fattr->mounted_on_fileid);
 	if (status < 0)
 		goto xdr_error;
-	if (status != 0 && !(fattr->valid & status)) {
-		fattr->fileid = fileid;
-		fattr->valid |= status;
-	}
+	fattr->valid |= status;
 
 xdr_error:
 	dprintk("%s: xdr returned %d\n", __func__, -status);
@@ -4838,17 +4833,21 @@ static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res)
 	struct nfs4_secinfo_flavor *sec_flavor;
 	int status;
 	__be32 *p;
-	int i;
+	int i, num_flavors;
 
 	status = decode_op_hdr(xdr, OP_SECINFO);
+	if (status)
+		goto out;
 	p = xdr_inline_decode(xdr, 4);
 	if (unlikely(!p))
 		goto out_overflow;
-	res->flavors->num_flavors = be32_to_cpup(p);
 
-	for (i = 0; i < res->flavors->num_flavors; i++) {
+	res->flavors->num_flavors = 0;
+	num_flavors = be32_to_cpup(p);
+
+	for (i = 0; i < num_flavors; i++) {
 		sec_flavor = &res->flavors->flavors[i];
-		if ((char *)&sec_flavor[1] - (char *)res > PAGE_SIZE)
+		if ((char *)&sec_flavor[1] - (char *)res->flavors > PAGE_SIZE)
 			break;
 
 		p = xdr_inline_decode(xdr, 4);
@@ -4857,13 +4856,15 @@ static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res)
 		sec_flavor->flavor = be32_to_cpup(p);
 
 		if (sec_flavor->flavor == RPC_AUTH_GSS) {
-			if (decode_secinfo_gss(xdr, sec_flavor))
-				break;
+			status = decode_secinfo_gss(xdr, sec_flavor);
+			if (status)
+				goto out;
 		}
+		res->flavors->num_flavors++;
 	}
 
-	return 0;
-
+out:
+	return status;
 out_overflow:
 	print_overflow_msg(__func__, xdr);
 	return -EIO;
@@ -6408,7 +6409,9 @@ int nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 	if (decode_getfattr_attrs(xdr, bitmap, entry->fattr, entry->fh,
 					entry->server, 1) < 0)
 		goto out_overflow;
-	if (entry->fattr->valid & NFS_ATTR_FATTR_FILEID)
+	if (entry->fattr->valid & NFS_ATTR_FATTR_MOUNTED_ON_FILEID)
+		entry->ino = entry->fattr->mounted_on_fileid;
+	else if (entry->fattr->valid & NFS_ATTR_FATTR_FILEID)
 		entry->ino = entry->fattr->fileid;
 
 	entry->d_type = DT_UNKNOWN;
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index d9ab97269ce..f57f5281a52 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -383,6 +383,7 @@ pnfs_destroy_all_layouts(struct nfs_client *clp)
 				plh_layouts);
 		dprintk("%s freeing layout for inode %lu\n", __func__,
 			lo->plh_inode->i_ino);
+		list_del_init(&lo->plh_layouts);
 		pnfs_destroy_layout(NFS_I(lo->plh_inode));
 	}
 }
@@ -466,7 +467,8 @@ pnfs_choose_layoutget_stateid(nfs4_stateid *dst, struct pnfs_layout_hdr *lo,
 static struct pnfs_layout_segment *
 send_layoutget(struct pnfs_layout_hdr *lo,
 	   struct nfs_open_context *ctx,
-	   u32 iomode)
+	   u32 iomode,
+	   gfp_t gfp_flags)
 {
 	struct inode *ino = lo->plh_inode;
 	struct nfs_server *server = NFS_SERVER(ino);
@@ -479,7 +481,7 @@ send_layoutget(struct pnfs_layout_hdr *lo,
 	dprintk("--> %s\n", __func__);
 
 	BUG_ON(ctx == NULL);
-	lgp = kzalloc(sizeof(*lgp), GFP_KERNEL);
+	lgp = kzalloc(sizeof(*lgp), gfp_flags);
 	if (lgp == NULL)
 		return NULL;
 
@@ -487,12 +489,12 @@ send_layoutget(struct pnfs_layout_hdr *lo,
 	max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
 	max_pages = max_resp_sz >> PAGE_SHIFT;
 
-	pages = kzalloc(max_pages * sizeof(struct page *), GFP_KERNEL);
+	pages = kzalloc(max_pages * sizeof(struct page *), gfp_flags);
 	if (!pages)
 		goto out_err_free;
 
 	for (i = 0; i < max_pages; i++) {
-		pages[i] = alloc_page(GFP_KERNEL);
+		pages[i] = alloc_page(gfp_flags);
 		if (!pages[i])
 			goto out_err_free;
 	}
@@ -508,6 +510,7 @@ send_layoutget(struct pnfs_layout_hdr *lo,
 	lgp->args.layout.pages = pages;
 	lgp->args.layout.pglen = max_pages * PAGE_SIZE;
 	lgp->lsegpp = &lseg;
+	lgp->gfp_flags = gfp_flags;
 
 	/* Synchronously retrieve layout information from server and
 	 * store in lseg.
@@ -665,11 +668,11 @@ pnfs_insert_layout(struct pnfs_layout_hdr *lo,
 }
 
 static struct pnfs_layout_hdr *
-alloc_init_layout_hdr(struct inode *ino)
+alloc_init_layout_hdr(struct inode *ino, gfp_t gfp_flags)
 {
 	struct pnfs_layout_hdr *lo;
 
-	lo = kzalloc(sizeof(struct pnfs_layout_hdr), GFP_KERNEL);
+	lo = kzalloc(sizeof(struct pnfs_layout_hdr), gfp_flags);
 	if (!lo)
 		return NULL;
 	atomic_set(&lo->plh_refcount, 1);
@@ -681,7 +684,7 @@ alloc_init_layout_hdr(struct inode *ino)
 }
 
 static struct pnfs_layout_hdr *
-pnfs_find_alloc_layout(struct inode *ino)
+pnfs_find_alloc_layout(struct inode *ino, gfp_t gfp_flags)
 {
 	struct nfs_inode *nfsi = NFS_I(ino);
 	struct pnfs_layout_hdr *new = NULL;
@@ -696,7 +699,7 @@ pnfs_find_alloc_layout(struct inode *ino)
 			return nfsi->layout;
 	}
 	spin_unlock(&ino->i_lock);
-	new = alloc_init_layout_hdr(ino);
+	new = alloc_init_layout_hdr(ino, gfp_flags);
 	spin_lock(&ino->i_lock);
 
 	if (likely(nfsi->layout == NULL))	/* Won the race? */
@@ -756,7 +759,8 @@ pnfs_find_lseg(struct pnfs_layout_hdr *lo, u32 iomode)
 struct pnfs_layout_segment *
 pnfs_update_layout(struct inode *ino,
 		   struct nfs_open_context *ctx,
-		   enum pnfs_iomode iomode)
+		   enum pnfs_iomode iomode,
+		   gfp_t gfp_flags)
 {
 	struct nfs_inode *nfsi = NFS_I(ino);
 	struct nfs_client *clp = NFS_SERVER(ino)->nfs_client;
@@ -767,7 +771,7 @@ pnfs_update_layout(struct inode *ino,
 	if (!pnfs_enabled_sb(NFS_SERVER(ino)))
 		return NULL;
 	spin_lock(&ino->i_lock);
-	lo = pnfs_find_alloc_layout(ino);
+	lo = pnfs_find_alloc_layout(ino, gfp_flags);
 	if (lo == NULL) {
 		dprintk("%s ERROR: can't get pnfs_layout_hdr\n", __func__);
 		goto out_unlock;
@@ -807,7 +811,7 @@ pnfs_update_layout(struct inode *ino,
 		spin_unlock(&clp->cl_lock);
 	}
 
-	lseg = send_layoutget(lo, ctx, iomode);
+	lseg = send_layoutget(lo, ctx, iomode, gfp_flags);
 	if (!lseg && first) {
 		spin_lock(&clp->cl_lock);
 		list_del_init(&lo->plh_layouts);
@@ -846,7 +850,7 @@ pnfs_layout_process(struct nfs4_layoutget *lgp)
 		goto out;
 	}
 	/* Inject layout blob into I/O device driver */
-	lseg = NFS_SERVER(ino)->pnfs_curr_ld->alloc_lseg(lo, res);
+	lseg = NFS_SERVER(ino)->pnfs_curr_ld->alloc_lseg(lo, res, lgp->gfp_flags);
 	if (!lseg || IS_ERR(lseg)) {
 		if (!lseg)
 			status = -ENOMEM;
@@ -899,7 +903,8 @@ static int pnfs_read_pg_test(struct nfs_pageio_descriptor *pgio,
 		/* This is first coelesce call for a series of nfs_pages */
 		pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
 						   prev->wb_context,
-						   IOMODE_READ);
+						   IOMODE_READ,
+						   GFP_KERNEL);
 	}
 	return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req);
 }
@@ -921,7 +926,8 @@ static int pnfs_write_pg_test(struct nfs_pageio_descriptor *pgio,
 		/* This is first coelesce call for a series of nfs_pages */
 		pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
 						   prev->wb_context,
-						   IOMODE_RW);
+						   IOMODE_RW,
+						   GFP_NOFS);
 	}
 	return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req);
 }
@@ -1004,6 +1010,7 @@ pnfs_set_layoutcommit(struct nfs_write_data *wdata)
 {
 	struct nfs_inode *nfsi = NFS_I(wdata->inode);
 	loff_t end_pos = wdata->args.offset + wdata->res.count;
+	bool mark_as_dirty = false;
 
 	spin_lock(&nfsi->vfs_inode.i_lock);
 	if (!test_and_set_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags)) {
@@ -1011,13 +1018,18 @@ pnfs_set_layoutcommit(struct nfs_write_data *wdata)
 		get_lseg(wdata->lseg);
 		wdata->lseg->pls_lc_cred =
 			get_rpccred(wdata->args.context->state->owner->so_cred);
-		mark_inode_dirty_sync(wdata->inode);
+		mark_as_dirty = true;
 		dprintk("%s: Set layoutcommit for inode %lu ",
 			__func__, wdata->inode->i_ino);
 	}
 	if (end_pos > wdata->lseg->pls_end_pos)
 		wdata->lseg->pls_end_pos = end_pos;
 	spin_unlock(&nfsi->vfs_inode.i_lock);
+
+	/* if pnfs_layoutcommit_inode() runs between inode locks, the next one
+	 * will be a noop because NFS_INO_LAYOUTCOMMIT will not be set */
+	if (mark_as_dirty)
+		mark_inode_dirty_sync(wdata->inode);
 }
 EXPORT_SYMBOL_GPL(pnfs_set_layoutcommit);
 
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index bc4827202e7..0c015bad9e7 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -70,7 +70,7 @@ struct pnfs_layoutdriver_type {
 	const u32 id;
 	const char *name;
 	struct module *owner;
-	struct pnfs_layout_segment * (*alloc_lseg) (struct pnfs_layout_hdr *layoutid, struct nfs4_layoutget_res *lgr);
+	struct pnfs_layout_segment * (*alloc_lseg) (struct pnfs_layout_hdr *layoutid, struct nfs4_layoutget_res *lgr, gfp_t gfp_flags);
 	void (*free_lseg) (struct pnfs_layout_segment *lseg);
 
 	/* test for nfs page cache coalescing */
@@ -126,7 +126,7 @@ void get_layout_hdr(struct pnfs_layout_hdr *lo);
 void put_lseg(struct pnfs_layout_segment *lseg);
 struct pnfs_layout_segment *
 pnfs_update_layout(struct inode *ino, struct nfs_open_context *ctx,
-		   enum pnfs_iomode access_type);
+		   enum pnfs_iomode access_type, gfp_t gfp_flags);
 void set_pnfs_layoutdriver(struct nfs_server *, u32 id);
 void unset_pnfs_layoutdriver(struct nfs_server *);
 enum pnfs_try_status pnfs_try_to_write_data(struct nfs_write_data *,
@@ -245,7 +245,7 @@ static inline void put_lseg(struct pnfs_layout_segment *lseg)
 
 static inline struct pnfs_layout_segment *
 pnfs_update_layout(struct inode *ino, struct nfs_open_context *ctx,
-		   enum pnfs_iomode access_type)
+		   enum pnfs_iomode access_type, gfp_t gfp_flags)
 {
 	return NULL;
 }
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 7cded2b12a0..2bcf0dc306a 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -288,7 +288,7 @@ static int nfs_pagein_multi(struct nfs_pageio_descriptor *desc)
 	atomic_set(&req->wb_complete, requests);
 
 	BUG_ON(desc->pg_lseg != NULL);
-	lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ);
+	lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ, GFP_KERNEL);
 	ClearPageError(page);
 	offset = 0;
 	nbytes = desc->pg_count;
@@ -351,7 +351,7 @@ static int nfs_pagein_one(struct nfs_pageio_descriptor *desc)
 	}
 	req = nfs_list_entry(data->pages.next);
 	if ((!lseg) && list_is_singular(&data->pages))
-		lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ);
+		lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ, GFP_KERNEL);
 
 	ret = nfs_read_rpcsetup(req, data, &nfs_read_full_ops, desc->pg_count,
 				0, lseg);
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 2b8e9a5e366..e288f06d3fa 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1004,6 +1004,7 @@ static int nfs_parse_security_flavors(char *value,
 		return 0;
 	}
 
+	mnt->flags |= NFS_MOUNT_SECFLAVOUR;
 	mnt->auth_flavor_len = 1;
 	return 1;
 }
@@ -1976,6 +1977,15 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data)
 	if (error < 0)
 		goto out;
 
+	/*
+	 * noac is a special case. It implies -o sync, but that's not
+	 * necessarily reflected in the mtab options. do_remount_sb
+	 * will clear MS_SYNCHRONOUS if -o sync wasn't specified in the
+	 * remount options, so we have to explicitly reset it.
+	 */
+	if (data->flags & NFS_MOUNT_NOAC)
+		*flags |= MS_SYNCHRONOUS;
+
 	/* compare new mount options with old ones */
 	error = nfs_compare_remount_data(nfss, data);
 out:
@@ -2235,8 +2245,7 @@ static struct dentry *nfs_fs_mount(struct file_system_type *fs_type,
 	if (!s->s_root) {
 		/* initial superblock/root creation */
 		nfs_fill_super(s, data);
-		nfs_fscache_get_super_cookie(
-			s, data ? data->fscache_uniq : NULL, NULL);
+		nfs_fscache_get_super_cookie(s, data->fscache_uniq, NULL);
 	}
 
 	mntroot = nfs_get_root(s, mntfh, dev_name);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index af0c6279a4a..49c715b4ac9 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -542,11 +542,15 @@ nfs_scan_commit(struct inode *inode, struct list_head *dst, pgoff_t idx_start, u
 	if (!nfs_need_commit(nfsi))
 		return 0;
 
+	spin_lock(&inode->i_lock);
 	ret = nfs_scan_list(nfsi, dst, idx_start, npages, NFS_PAGE_TAG_COMMIT);
 	if (ret > 0)
 		nfsi->ncommit -= ret;
+	spin_unlock(&inode->i_lock);
+
 	if (nfs_need_commit(NFS_I(inode)))
 		__mark_inode_dirty(inode, I_DIRTY_DATASYNC);
+
 	return ret;
 }
 #else
@@ -676,7 +680,6 @@ static int nfs_writepage_setup(struct nfs_open_context *ctx, struct page *page,
 	req = nfs_setup_write_request(ctx, page, offset, count);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
-	nfs_mark_request_dirty(req);
 	/* Update file length */
 	nfs_grow_file(page, offset, count);
 	nfs_mark_uptodate(page, req->wb_pgbase, req->wb_bytes);
@@ -936,7 +939,7 @@ static int nfs_flush_multi(struct nfs_pageio_descriptor *desc)
 	atomic_set(&req->wb_complete, requests);
 
 	BUG_ON(desc->pg_lseg);
-	lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW);
+	lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW, GFP_NOFS);
 	ClearPageError(page);
 	offset = 0;
 	nbytes = desc->pg_count;
@@ -1010,7 +1013,7 @@ static int nfs_flush_one(struct nfs_pageio_descriptor *desc)
 	}
 	req = nfs_list_entry(data->pages.next);
 	if ((!lseg) && list_is_singular(&data->pages))
-		lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW);
+		lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW, GFP_NOFS);
 
 	if ((desc->pg_ioflags & FLUSH_COND_STABLE) &&
 	    (desc->pg_moreio || NFS_I(desc->pg_inode)->ncommit))
@@ -1414,8 +1417,7 @@ static void nfs_commit_done(struct rpc_task *task, void *calldata)
                                 task->tk_pid, task->tk_status);
 
 	/* Call the NFS version-specific code */
-	if (NFS_PROTO(data->inode)->commit_done(task, data) != 0)
-		return;
+	NFS_PROTO(data->inode)->commit_done(task, data);
 }
 
 void nfs_commit_release_pages(struct nfs_write_data *data)
@@ -1483,9 +1485,7 @@ int nfs_commit_inode(struct inode *inode, int how)
 	res = nfs_commit_set_lock(NFS_I(inode), may_wait);
 	if (res <= 0)
 		goto out_mark_dirty;
-	spin_lock(&inode->i_lock);
 	res = nfs_scan_commit(inode, &head, 0, 0);
-	spin_unlock(&inode->i_lock);
 	if (res) {
 		int error;
 
diff --git a/fs/nfs_common/nfsacl.c b/fs/nfs_common/nfsacl.c
index ec0f277be7f..6940439bd60 100644
--- a/fs/nfs_common/nfsacl.c
+++ b/fs/nfs_common/nfsacl.c
@@ -173,7 +173,7 @@ xdr_nfsace_decode(struct xdr_array2_desc *desc, void *elem)
 				return -EINVAL;
 			break;
 		case ACL_MASK:
-			/* Solaris sometimes sets additonal bits in the mask */
+			/* Solaris sometimes sets additional bits in the mask */
 			entry->e_perm &= S_IRWXO;
 			break;
 		default:
diff --git a/fs/nfsd/lockd.c b/fs/nfsd/lockd.c
index 0c6d8167013..7c831a2731f 100644
--- a/fs/nfsd/lockd.c
+++ b/fs/nfsd/lockd.c
@@ -38,7 +38,6 @@ nlm_fopen(struct svc_rqst *rqstp, struct nfs_fh *f, struct file **filp)
 	exp_readlock();
 	nfserr = nfsd_open(rqstp, &fh, S_IFREG, NFSD_MAY_LOCK, filp);
 	fh_put(&fh);
-	rqstp->rq_client = NULL;
 	exp_readunlock();
  	/* We return nlm error codes as nlm doesn't know
 	 * about nfsd, but nfsd does know about nlm..
diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c
index 7e84a852cda..ad48faca20f 100644
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -702,7 +702,7 @@ nfs3svc_encode_readres(struct svc_rqst *rqstp, __be32 *p,
 		*p++ = htonl(resp->eof);
 		*p++ = htonl(resp->count);	/* xdr opaque count */
 		xdr_ressize_check(rqstp, p);
-		/* now update rqstp->rq_res to reflect data aswell */
+		/* now update rqstp->rq_res to reflect data as well */
 		rqstp->rq_res.page_len = resp->count;
 		if (resp->count & 3) {
 			/* need to pad the tail */
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index fbde6f79922..4cf04e11c66 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -258,6 +258,7 @@ static void nfs4_put_deleg_lease(struct nfs4_file *fp)
 	if (atomic_dec_and_test(&fp->fi_delegees)) {
 		vfs_setlease(fp->fi_deleg_file, F_UNLCK, &fp->fi_lease);
 		fp->fi_lease = NULL;
+		fput(fp->fi_deleg_file);
 		fp->fi_deleg_file = NULL;
 	}
 }
@@ -397,9 +398,12 @@ static void unhash_generic_stateid(struct nfs4_stateid *stp)
 
 static void free_generic_stateid(struct nfs4_stateid *stp)
 {
-	int oflag = nfs4_access_bmap_to_omode(stp);
+	int oflag;
 
-	nfs4_file_put_access(stp->st_file, oflag);
+	if (stp->st_access_bmap) {
+		oflag = nfs4_access_bmap_to_omode(stp);
+		nfs4_file_put_access(stp->st_file, oflag);
+	}
 	put_nfs4_file(stp->st_file);
 	kmem_cache_free(stateid_slab, stp);
 }
@@ -3055,7 +3059,7 @@ check_special_stateids(svc_fh *current_fh, stateid_t *stateid, int flags)
 	if (ONE_STATEID(stateid) && (flags & RD_STATE))
 		return nfs_ok;
 	else if (locks_in_grace()) {
-		/* Answer in remaining cases depends on existance of
+		/* Answer in remaining cases depends on existence of
 		 * conflicting state; so we must wait out the grace period. */
 		return nfserr_grace;
 	} else if (flags & WR_STATE)
@@ -3675,7 +3679,7 @@ find_lockstateowner_str(struct inode *inode, clientid_t *clid,
 /*
  * Alloc a lock owner structure.
  * Called in nfsd4_lock - therefore, OPEN and OPEN_CONFIRM (if needed) has 
- * occured. 
+ * occurred. 
  *
  * strhashval = lock_ownerstr_hashval 
  */
diff --git a/fs/nfsd/nfsxdr.c b/fs/nfsd/nfsxdr.c
index 4ce005dbf3e..65ec595e222 100644
--- a/fs/nfsd/nfsxdr.c
+++ b/fs/nfsd/nfsxdr.c
@@ -451,7 +451,7 @@ nfssvc_encode_readres(struct svc_rqst *rqstp, __be32 *p,
 	*p++ = htonl(resp->count);
 	xdr_ressize_check(rqstp, p);
 
-	/* now update rqstp->rq_res to reflect data aswell */
+	/* now update rqstp->rq_res to reflect data as well */
 	rqstp->rq_res.page_len = resp->count;
 	if (resp->count & 3) {
 		/* need to pad the tail */
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 2e1cebde90d..129f3c9f62d 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1363,7 +1363,7 @@ nfsd_create_v3(struct svc_rqst *rqstp, struct svc_fh *fhp,
 		goto out;
 	if (!(iap->ia_valid & ATTR_MODE))
 		iap->ia_mode = 0;
-	err = fh_verify(rqstp, fhp, S_IFDIR, NFSD_MAY_CREATE);
+	err = fh_verify(rqstp, fhp, S_IFDIR, NFSD_MAY_EXEC);
 	if (err)
 		goto out;
 
@@ -1385,6 +1385,13 @@ nfsd_create_v3(struct svc_rqst *rqstp, struct svc_fh *fhp,
 	if (IS_ERR(dchild))
 		goto out_nfserr;
 
+	/* If file doesn't exist, check for permissions to create one */
+	if (!dchild->d_inode) {
+		err = fh_verify(rqstp, fhp, S_IFDIR, NFSD_MAY_CREATE);
+		if (err)
+			goto out;
+	}
+
 	err = fh_compose(resfhp, fhp->fh_export, dchild, fhp);
 	if (err)
 		goto out;
diff --git a/fs/nilfs2/alloc.c b/fs/nilfs2/alloc.c
index 0a0a66d98cc..f7684483785 100644
--- a/fs/nilfs2/alloc.c
+++ b/fs/nilfs2/alloc.c
@@ -646,7 +646,7 @@ int nilfs_palloc_freev(struct inode *inode, __u64 *entry_nrs, size_t nitems)
 	unsigned long group, group_offset;
 	int i, j, n, ret;
 
-	for (i = 0; i < nitems; i += n) {
+	for (i = 0; i < nitems; i = j) {
 		group = nilfs_palloc_group(inode, entry_nrs[i], &group_offset);
 		ret = nilfs_palloc_get_desc_block(inode, group, 0, &desc_bh);
 		if (ret < 0)
diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c
index 93589fccdd9..397e7325863 100644
--- a/fs/nilfs2/file.c
+++ b/fs/nilfs2/file.c
@@ -72,10 +72,9 @@ static int nilfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 	/*
 	 * check to see if the page is mapped already (no holes)
 	 */
-	if (PageMappedToDisk(page)) {
-		unlock_page(page);
+	if (PageMappedToDisk(page))
 		goto mapped;
-	}
+
 	if (page_has_buffers(page)) {
 		struct buffer_head *bh, *head;
 		int fully_mapped = 1;
@@ -90,7 +89,6 @@ static int nilfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 
 		if (fully_mapped) {
 			SetPageMappedToDisk(page);
-			unlock_page(page);
 			goto mapped;
 		}
 	}
@@ -105,16 +103,17 @@ static int nilfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
 		return VM_FAULT_SIGBUS;
 
 	ret = block_page_mkwrite(vma, vmf, nilfs_get_block);
-	if (unlikely(ret)) {
+	if (ret != VM_FAULT_LOCKED) {
 		nilfs_transaction_abort(inode->i_sb);
 		return ret;
 	}
+	nilfs_set_file_dirty(inode, 1 << (PAGE_SHIFT - inode->i_blkbits));
 	nilfs_transaction_commit(inode->i_sb);
 
  mapped:
 	SetPageChecked(page);
 	wait_on_page_writeback(page);
-	return 0;
+	return VM_FAULT_LOCKED;
 }
 
 static const struct vm_operations_struct nilfs_file_vm_ops = {
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 856e8e4e0b7..a8dd344303c 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -114,19 +114,19 @@ enum {
  * Macros to check inode numbers
  */
 #define NILFS_MDT_INO_BITS   \
-  ((unsigned int)(1 << NILFS_DAT_INO | 1 << NILFS_CPFILE_INO |		\
-		  1 << NILFS_SUFILE_INO | 1 << NILFS_IFILE_INO |	\
-		  1 << NILFS_ATIME_INO | 1 << NILFS_SKETCH_INO))
+	((unsigned int)(1 << NILFS_DAT_INO | 1 << NILFS_CPFILE_INO |	\
+			1 << NILFS_SUFILE_INO | 1 << NILFS_IFILE_INO |	\
+			1 << NILFS_ATIME_INO | 1 << NILFS_SKETCH_INO))
 
 #define NILFS_SYS_INO_BITS   \
-  ((unsigned int)(1 << NILFS_ROOT_INO) | NILFS_MDT_INO_BITS)
+	((unsigned int)(1 << NILFS_ROOT_INO) | NILFS_MDT_INO_BITS)
 
 #define NILFS_FIRST_INO(sb) (((struct the_nilfs *)sb->s_fs_info)->ns_first_ino)
 
 #define NILFS_MDT_INODE(sb, ino) \
-  ((ino) < NILFS_FIRST_INO(sb) && (NILFS_MDT_INO_BITS & (1 << (ino))))
+	((ino) < NILFS_FIRST_INO(sb) && (NILFS_MDT_INO_BITS & (1 << (ino))))
 #define NILFS_VALID_INODE(sb, ino) \
-  ((ino) >= NILFS_FIRST_INO(sb) || (NILFS_SYS_INO_BITS & (1 << (ino))))
+	((ino) >= NILFS_FIRST_INO(sb) || (NILFS_SYS_INO_BITS & (1 << (ino))))
 
 /**
  * struct nilfs_transaction_info: context information for synchronization
@@ -285,7 +285,7 @@ extern void nilfs_destroy_inode(struct inode *);
 extern void nilfs_error(struct super_block *, const char *, const char *, ...)
 	__attribute__ ((format (printf, 3, 4)));
 extern void nilfs_warning(struct super_block *, const char *, const char *, ...)
-       __attribute__ ((format (printf, 3, 4)));
+	__attribute__ ((format (printf, 3, 4)));
 extern struct nilfs_super_block *
 nilfs_read_super_block(struct super_block *, u64, int, struct buffer_head **);
 extern int nilfs_store_magic_and_option(struct super_block *,
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 4d2a1ee0eb4..1168059c7ef 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -500,7 +500,7 @@ void nilfs_mapping_init(struct address_space *mapping,
 	mapping_set_gfp_mask(mapping, GFP_NOFS);
 	mapping->assoc_mapping = NULL;
 	mapping->backing_dev_info = bdi;
-	mapping->a_ops = NULL;
+	mapping->a_ops = &empty_aops;
 }
 
 /*
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 6b1305dc26c..9fde1c00a29 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -164,7 +164,7 @@ static int process_access_response(struct fsnotify_group *group,
 		 fd, response);
 	/*
 	 * make sure the response is valid, if invalid we do nothing and either
-	 * userspace can send a valid responce or we will clean it up after the
+	 * userspace can send a valid response or we will clean it up after the
 	 * timeout
 	 */
 	switch (response) {
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index a91b69a6a29..e3cbd746f64 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -194,10 +194,11 @@ static int idr_callback(int id, void *p, void *data)
 
 static void inotify_free_group_priv(struct fsnotify_group *group)
 {
-	/* ideally the idr is empty and we won't hit the BUG in teh callback */
+	/* ideally the idr is empty and we won't hit the BUG in the callback */
 	idr_for_each(&group->inotify_data.idr, idr_callback, group);
 	idr_remove_all(&group->inotify_data.idr);
 	idr_destroy(&group->inotify_data.idr);
+	atomic_dec(&group->inotify_data.user->inotify_devs);
 	free_uid(group->inotify_data.user);
 }
 
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index bd46e7c8a0e..8445fbc8985 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -290,7 +290,6 @@ static int inotify_fasync(int fd, struct file *file, int on)
 static int inotify_release(struct inode *ignored, struct file *file)
 {
 	struct fsnotify_group *group = file->private_data;
-	struct user_struct *user = group->inotify_data.user;
 
 	pr_debug("%s: group=%p\n", __func__, group);
 
@@ -299,8 +298,6 @@ static int inotify_release(struct inode *ignored, struct file *file)
 	/* free this group, matching get was inotify_init->fsnotify_obtain_group */
 	fsnotify_put_group(group);
 
-	atomic_dec(&user->inotify_devs);
-
 	return 0;
 }
 
@@ -697,7 +694,7 @@ retry:
 	return ret;
 }
 
-static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsigned int max_events)
+static struct fsnotify_group *inotify_new_group(unsigned int max_events)
 {
 	struct fsnotify_group *group;
 
@@ -710,8 +707,14 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign
 	spin_lock_init(&group->inotify_data.idr_lock);
 	idr_init(&group->inotify_data.idr);
 	group->inotify_data.last_wd = 0;
-	group->inotify_data.user = user;
 	group->inotify_data.fa = NULL;
+	group->inotify_data.user = get_current_user();
+
+	if (atomic_inc_return(&group->inotify_data.user->inotify_devs) >
+	    inotify_max_user_instances) {
+		fsnotify_put_group(group);
+		return ERR_PTR(-EMFILE);
+	}
 
 	return group;
 }
@@ -721,7 +724,6 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign
 SYSCALL_DEFINE1(inotify_init1, int, flags)
 {
 	struct fsnotify_group *group;
-	struct user_struct *user;
 	int ret;
 
 	/* Check the IN_* constants for consistency.  */
@@ -731,31 +733,16 @@ SYSCALL_DEFINE1(inotify_init1, int, flags)
 	if (flags & ~(IN_CLOEXEC | IN_NONBLOCK))
 		return -EINVAL;
 
-	user = get_current_user();
-	if (unlikely(atomic_read(&user->inotify_devs) >=
-			inotify_max_user_instances)) {
-		ret = -EMFILE;
-		goto out_free_uid;
-	}
-
 	/* fsnotify_obtain_group took a reference to group, we put this when we kill the file in the end */
-	group = inotify_new_group(user, inotify_max_queued_events);
-	if (IS_ERR(group)) {
-		ret = PTR_ERR(group);
-		goto out_free_uid;
-	}
-
-	atomic_inc(&user->inotify_devs);
+	group = inotify_new_group(inotify_max_queued_events);
+	if (IS_ERR(group))
+		return PTR_ERR(group);
 
 	ret = anon_inode_getfd("inotify", &inotify_fops, group,
 				  O_RDONLY | flags);
-	if (ret >= 0)
-		return ret;
+	if (ret < 0)
+		fsnotify_put_group(group);
 
-	fsnotify_put_group(group);
-	atomic_dec(&user->inotify_devs);
-out_free_uid:
-	free_uid(user);
 	return ret;
 }
 
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 50c00856f73..252ab1f6452 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -24,7 +24,7 @@
  * referencing this object.  The object typically will live inside the kernel
  * with a refcnt of 2, one for each list it is on (i_list, g_list).  Any task
  * which can find this object holding the appropriete locks, can take a reference
- * and the object itself is guarenteed to survive until the reference is dropped.
+ * and the object itself is guaranteed to survive until the reference is dropped.
  *
  * LOCKING:
  * There are 3 spinlocks involved with fsnotify inode marks and they MUST
diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
index f5094ee224c..f14fde2b03d 100644
--- a/fs/ntfs/attrib.c
+++ b/fs/ntfs/attrib.c
@@ -197,7 +197,7 @@ err_out:
 	} else if (ctx_needs_reset) {
 		/*
 		 * If there is no attribute list, restoring the search context
-		 * is acomplished simply by copying the saved context back over
+		 * is accomplished simply by copying the saved context back over
 		 * the caller supplied context.  If there is an attribute list,
 		 * things are more complicated as we need to deal with mapping
 		 * of mft records and resulting potential changes in pointers.
@@ -1181,7 +1181,7 @@ not_found:
  * for, i.e. if one wants to add the attribute to the mft record this is the
  * correct place to insert its attribute list entry into.
  *
- * When -errno != -ENOENT, an error occured during the lookup.  @ctx->attr is
+ * When -errno != -ENOENT, an error occurred during the lookup.  @ctx->attr is
  * then undefined and in particular you should not rely on it not changing.
  */
 int ntfs_attr_lookup(const ATTR_TYPE type, const ntfschar *name,
diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c
index ef9ed854255..ee4144ce5d7 100644
--- a/fs/ntfs/compress.c
+++ b/fs/ntfs/compress.c
@@ -501,7 +501,7 @@ int ntfs_read_compressed_block(struct page *page)
 	VCN start_vcn = (((s64)index << PAGE_CACHE_SHIFT) & ~cb_size_mask) >>
 			vol->cluster_size_bits;
 	/*
-	 * The first vcn after the last wanted vcn (minumum alignment is again
+	 * The first vcn after the last wanted vcn (minimum alignment is again
 	 * PAGE_CACHE_SIZE.
 	 */
 	VCN end_vcn = ((((s64)(index + 1UL) << PAGE_CACHE_SHIFT) + cb_size - 1)
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 0b56c6b7ec0..c05d6dcf77a 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -622,7 +622,7 @@ static int ntfs_read_locked_inode(struct inode *vi)
 	 */
 	/* Everyone gets all permissions. */
 	vi->i_mode |= S_IRWXUGO;
-	/* If read-only, noone gets write permissions. */
+	/* If read-only, no one gets write permissions. */
 	if (IS_RDONLY(vi))
 		vi->i_mode &= ~S_IWUGO;
 	if (m->flags & MFT_RECORD_IS_DIRECTORY) {
@@ -2529,7 +2529,7 @@ retry_truncate:
 		 * specifies that the behaviour is unspecified thus we do not
 		 * have to do anything.  This means that in our implementation
 		 * in the rare case that the file is mmap()ped and a write
-		 * occured into the mmap()ped region just beyond the file size
+		 * occurred into the mmap()ped region just beyond the file size
 		 * and writepage has not yet been called to write out the page
 		 * (which would clear the area beyond the file size) and we now
 		 * extend the file size to incorporate this dirty region
diff --git a/fs/ntfs/layout.h b/fs/ntfs/layout.h
index 8b2549f672b..faece719086 100644
--- a/fs/ntfs/layout.h
+++ b/fs/ntfs/layout.h
@@ -286,7 +286,7 @@ typedef le16 MFT_RECORD_FLAGS;
  * fragmented. Volume free space includes the empty part of the mft zone and
  * when the volume's free 88% are used up, the mft zone is shrunk by a factor
  * of 2, thus making more space available for more files/data. This process is
- * repeated everytime there is no more free space except for the mft zone until
+ * repeated every time there is no more free space except for the mft zone until
  * there really is no more free space.
  */
 
@@ -1657,13 +1657,13 @@ typedef enum {
  *	pointed to by the Owner field was provided by a defaulting mechanism
  *	rather than explicitly provided by the original provider of the
  *	security descriptor.  This may affect the treatment of the SID with
- *	respect to inheritence of an owner.
+ *	respect to inheritance of an owner.
  *
  * SE_GROUP_DEFAULTED - This boolean flag, when set, indicates that the SID in
  *	the Group field was provided by a defaulting mechanism rather than
  *	explicitly provided by the original provider of the security
  *	descriptor.  This may affect the treatment of the SID with respect to
- *	inheritence of a primary group.
+ *	inheritance of a primary group.
  *
  * SE_DACL_PRESENT - This boolean flag, when set, indicates that the security
  *	descriptor contains a discretionary ACL.  If this flag is set and the
@@ -1674,7 +1674,7 @@ typedef enum {
  *	pointed to by the Dacl field was provided by a defaulting mechanism
  *	rather than explicitly provided by the original provider of the
  *	security descriptor.  This may affect the treatment of the ACL with
- *	respect to inheritence of an ACL.  This flag is ignored if the
+ *	respect to inheritance of an ACL.  This flag is ignored if the
  *	DaclPresent flag is not set.
  *
  * SE_SACL_PRESENT - This boolean flag, when set,  indicates that the security
@@ -1686,7 +1686,7 @@ typedef enum {
  *	pointed to by the Sacl field was provided by a defaulting mechanism
  *	rather than explicitly provided by the original provider of the
  *	security descriptor.  This may affect the treatment of the ACL with
- *	respect to inheritence of an ACL.  This flag is ignored if the
+ *	respect to inheritance of an ACL.  This flag is ignored if the
  *	SaclPresent flag is not set.
  *
  * SE_SELF_RELATIVE - This boolean flag, when set, indicates that the security
@@ -2283,7 +2283,7 @@ typedef struct {
 	//		   the key_length is zero, then the vcn immediately
 	//		   follows the INDEX_ENTRY_HEADER. Regardless of
 	//		   key_length, the address of the 8-byte boundary
-	//		   alligned vcn of INDEX_ENTRY{_HEADER} *ie is given by
+	//		   aligned vcn of INDEX_ENTRY{_HEADER} *ie is given by
 	//		   (char*)ie + le16_to_cpu(ie*)->length) - sizeof(VCN),
 	//		   where sizeof(VCN) can be hardcoded as 8 if wanted. */
 } __attribute__ ((__packed__)) INDEX_ENTRY;
diff --git a/fs/ntfs/logfile.c b/fs/ntfs/logfile.c
index 4dadcdf3d45..c71de292c5a 100644
--- a/fs/ntfs/logfile.c
+++ b/fs/ntfs/logfile.c
@@ -669,7 +669,7 @@ err_out:
  * of cases where we think that a volume is dirty when in fact it is clean.
  * This should only affect volumes that have not been shutdown cleanly but did
  * not have any pending, non-check-pointed i/o, i.e. they were completely idle
- * at least for the five seconds preceeding the unclean shutdown.
+ * at least for the five seconds preceding the unclean shutdown.
  *
  * This function assumes that the $LogFile journal has already been consistency
  * checked by a call to ntfs_check_logfile() and in particular if the $LogFile
diff --git a/fs/ntfs/logfile.h b/fs/ntfs/logfile.h
index b5a6f08bd35..aa2b6ac3f0a 100644
--- a/fs/ntfs/logfile.h
+++ b/fs/ntfs/logfile.h
@@ -222,7 +222,7 @@ typedef struct {
 /* 24*/	sle64 file_size;	/* Usable byte size of the log file.  If the
 				   restart_area_offset + the offset of the
 				   file_size are > 510 then corruption has
-				   occured.  This is the very first check when
+				   occurred.  This is the very first check when
 				   starting with the restart_area as if it
 				   fails it means that some of the above values
 				   will be corrupted by the multi sector
diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
index 326e7475a22..382857f9c7d 100644
--- a/fs/ntfs/mft.c
+++ b/fs/ntfs/mft.c
@@ -73,7 +73,7 @@ static inline MFT_RECORD *map_mft_record_page(ntfs_inode *ni)
 		if (index > end_index || (i_size & ~PAGE_CACHE_MASK) < ofs +
 				vol->mft_record_size) {
 			page = ERR_PTR(-ENOENT);
-			ntfs_error(vol->sb, "Attemt to read mft record 0x%lx, "
+			ntfs_error(vol->sb, "Attempt to read mft record 0x%lx, "
 					"which is beyond the end of the mft.  "
 					"This is probably a bug in the ntfs "
 					"driver.", ni->mft_no);
@@ -1442,7 +1442,7 @@ static int ntfs_mft_bitmap_extend_allocation_nolock(ntfs_volume *vol)
 		// Note: It will need to be a special mft record and if none of
 		// those are available it gets rather complicated...
 		ntfs_error(vol->sb, "Not enough space in this mft record to "
-				"accomodate extended mft bitmap attribute "
+				"accommodate extended mft bitmap attribute "
 				"extent.  Cannot handle this yet.");
 		ret = -EOPNOTSUPP;
 		goto undo_alloc;
@@ -1879,7 +1879,7 @@ static int ntfs_mft_data_extend_allocation_nolock(ntfs_volume *vol)
 		// and we would then need to update all references to this mft
 		// record appropriately.  This is rather complicated...
 		ntfs_error(vol->sb, "Not enough space in this mft record to "
-				"accomodate extended mft data attribute "
+				"accommodate extended mft data attribute "
 				"extent.  Cannot handle this yet.");
 		ret = -EOPNOTSUPP;
 		goto undo_alloc;
@@ -2357,7 +2357,7 @@ ntfs_inode *ntfs_mft_record_alloc(ntfs_volume *vol, const int mode,
 	}
 #ifdef DEBUG
 	read_lock_irqsave(&mftbmp_ni->size_lock, flags);
-	ntfs_debug("Status of mftbmp after initialized extention: "
+	ntfs_debug("Status of mftbmp after initialized extension: "
 			"allocated_size 0x%llx, data_size 0x%llx, "
 			"initialized_size 0x%llx.",
 			(long long)mftbmp_ni->allocated_size,
diff --git a/fs/ntfs/runlist.c b/fs/ntfs/runlist.c
index 56a9a6d25a2..eac7d6788a1 100644
--- a/fs/ntfs/runlist.c
+++ b/fs/ntfs/runlist.c
@@ -1243,7 +1243,7 @@ err_out:
  * write.
  *
  * This is used when building the mapping pairs array of a runlist to compress
- * a given logical cluster number (lcn) or a specific run length to the minumum
+ * a given logical cluster number (lcn) or a specific run length to the minimum
  * size possible.
  *
  * Return the number of bytes written on success.  On error, i.e. the
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 29099a07b9f..b52706da464 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -458,7 +458,7 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt)
 	 * the volume on boot and updates them.
 	 *
 	 * When remounting read-only, mark the volume clean if no volume errors
-	 * have occured.
+	 * have occurred.
 	 */
 	if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
 		static const char *es = ".  Cannot remount read-write.";
@@ -1269,7 +1269,7 @@ static int check_windows_hibernation_status(ntfs_volume *vol)
 					"hibernated on the volume.");
 			return 0;
 		}
-		/* A real error occured. */
+		/* A real error occurred. */
 		ntfs_error(vol->sb, "Failed to find inode number for "
 				"hiberfil.sys.");
 		return ret;
@@ -1370,7 +1370,7 @@ static bool load_and_init_quota(ntfs_volume *vol)
 			NVolSetQuotaOutOfDate(vol);
 			return true;
 		}
-		/* A real error occured. */
+		/* A real error occurred. */
 		ntfs_error(vol->sb, "Failed to find inode number for $Quota.");
 		return false;
 	}
@@ -1454,7 +1454,7 @@ not_enabled:
 			NVolSetUsnJrnlStamped(vol);
 			return true;
 		}
-		/* A real error occured. */
+		/* A real error occurred. */
 		ntfs_error(vol->sb, "Failed to find inode number for "
 				"$UsnJrnl.");
 		return false;
@@ -2292,7 +2292,7 @@ static void ntfs_put_super(struct super_block *sb)
 	ntfs_commit_inode(vol->mft_ino);
 
 	/*
-	 * If a read-write mount and no volume errors have occured, mark the
+	 * If a read-write mount and no volume errors have occurred, mark the
 	 * volume clean.  Also, re-commit all affected inodes.
 	 */
 	if (!(sb->s_flags & MS_RDONLY)) {
@@ -2496,7 +2496,7 @@ static s64 get_nr_free_clusters(ntfs_volume *vol)
 	if (vol->nr_clusters & 63)
 		nr_free += 64 - (vol->nr_clusters & 63);
 	up_read(&vol->lcnbmp_lock);
-	/* If errors occured we may well have gone below zero, fix this. */
+	/* If errors occurred we may well have gone below zero, fix this. */
 	if (nr_free < 0)
 		nr_free = 0;
 	ntfs_debug("Exiting.");
@@ -2561,7 +2561,7 @@ static unsigned long __get_nr_free_mft_records(ntfs_volume *vol,
 	}
 	ntfs_debug("Finished reading $MFT/$BITMAP, last index = 0x%lx.",
 			index - 1);
-	/* If errors occured we may well have gone below zero, fix this. */
+	/* If errors occurred we may well have gone below zero, fix this. */
 	if (nr_free < 0)
 		nr_free = 0;
 	ntfs_debug("Exiting.");
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index b27a0d86f8c..48aa9c7401c 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -4519,7 +4519,7 @@ set_tail_append:
 }
 
 /*
- * Helper function called at the begining of an insert.
+ * Helper function called at the beginning of an insert.
  *
  * This computes a few things that are commonly used in the process of
  * inserting into the btree:
diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h
index eceb456037c..75cf3ad987a 100644
--- a/fs/ocfs2/aops.h
+++ b/fs/ocfs2/aops.h
@@ -71,7 +71,7 @@ static inline void ocfs2_iocb_set_rw_locked(struct kiocb *iocb, int level)
 
 /*
  * Using a named enum representing lock types in terms of #N bit stored in
- * iocb->private, which is going to be used for communication bewteen
+ * iocb->private, which is going to be used for communication between
  * ocfs2_dio_end_io() and ocfs2_file_aio_write/read().
  */
 enum ocfs2_iocb_lock_bits {
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 2461eb3272e..9a3e6bbff27 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -539,25 +539,41 @@ static int o2hb_verify_crc(struct o2hb_region *reg,
 
 /* We want to make sure that nobody is heartbeating on top of us --
  * this will help detect an invalid configuration. */
-static int o2hb_check_last_timestamp(struct o2hb_region *reg)
+static void o2hb_check_last_timestamp(struct o2hb_region *reg)
 {
-	int node_num, ret;
 	struct o2hb_disk_slot *slot;
 	struct o2hb_disk_heartbeat_block *hb_block;
+	char *errstr;
 
-	node_num = o2nm_this_node();
-
-	ret = 1;
-	slot = &reg->hr_slots[node_num];
+	slot = &reg->hr_slots[o2nm_this_node()];
 	/* Don't check on our 1st timestamp */
-	if (slot->ds_last_time) {
-		hb_block = slot->ds_raw_block;
+	if (!slot->ds_last_time)
+		return;
 
-		if (le64_to_cpu(hb_block->hb_seq) != slot->ds_last_time)
-			ret = 0;
-	}
+	hb_block = slot->ds_raw_block;
+	if (le64_to_cpu(hb_block->hb_seq) == slot->ds_last_time &&
+	    le64_to_cpu(hb_block->hb_generation) == slot->ds_last_generation &&
+	    hb_block->hb_node == slot->ds_node_num)
+		return;
 
-	return ret;
+#define ERRSTR1		"Another node is heartbeating on device"
+#define ERRSTR2		"Heartbeat generation mismatch on device"
+#define ERRSTR3		"Heartbeat sequence mismatch on device"
+
+	if (hb_block->hb_node != slot->ds_node_num)
+		errstr = ERRSTR1;
+	else if (le64_to_cpu(hb_block->hb_generation) !=
+		 slot->ds_last_generation)
+		errstr = ERRSTR2;
+	else
+		errstr = ERRSTR3;
+
+	mlog(ML_ERROR, "%s (%s): expected(%u:0x%llx, 0x%llx), "
+	     "ondisk(%u:0x%llx, 0x%llx)\n", errstr, reg->hr_dev_name,
+	     slot->ds_node_num, (unsigned long long)slot->ds_last_generation,
+	     (unsigned long long)slot->ds_last_time, hb_block->hb_node,
+	     (unsigned long long)le64_to_cpu(hb_block->hb_generation),
+	     (unsigned long long)le64_to_cpu(hb_block->hb_seq));
 }
 
 static inline void o2hb_prepare_block(struct o2hb_region *reg,
@@ -983,9 +999,7 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg)
 	/* With an up to date view of the slots, we can check that no
 	 * other node has been improperly configured to heartbeat in
 	 * our slot. */
-	if (!o2hb_check_last_timestamp(reg))
-		mlog(ML_ERROR, "Device \"%s\": another node is heartbeating "
-		     "in our slot!\n", reg->hr_dev_name);
+	o2hb_check_last_timestamp(reg);
 
 	/* fill in the proper info for our next heartbeat */
 	o2hb_prepare_block(reg, reg->hr_generation);
@@ -999,8 +1013,8 @@ static int o2hb_do_disk_heartbeat(struct o2hb_region *reg)
 	}
 
 	i = -1;
-	while((i = find_next_bit(configured_nodes, O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) {
-
+	while((i = find_next_bit(configured_nodes,
+				 O2NM_MAX_NODES, i + 1)) < O2NM_MAX_NODES) {
 		change |= o2hb_check_slot(reg, &reg->hr_slots[i]);
 	}
 
@@ -1690,6 +1704,7 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg,
 	struct file *filp = NULL;
 	struct inode *inode = NULL;
 	ssize_t ret = -EINVAL;
+	int live_threshold;
 
 	if (reg->hr_bdev)
 		goto out;
@@ -1766,8 +1781,18 @@ static ssize_t o2hb_region_dev_write(struct o2hb_region *reg,
 	 * A node is considered live after it has beat LIVE_THRESHOLD
 	 * times.  We're not steady until we've given them a chance
 	 * _after_ our first read.
+	 * The default threshold is bare minimum so as to limit the delay
+	 * during mounts. For global heartbeat, the threshold doubled for the
+	 * first region.
 	 */
-	atomic_set(&reg->hr_steady_iterations, O2HB_LIVE_THRESHOLD + 1);
+	live_threshold = O2HB_LIVE_THRESHOLD;
+	if (o2hb_global_heartbeat_active()) {
+		spin_lock(&o2hb_live_lock);
+		if (o2hb_pop_count(&o2hb_region_bitmap, O2NM_MAX_REGIONS) == 1)
+			live_threshold <<= 1;
+		spin_unlock(&o2hb_live_lock);
+	}
+	atomic_set(&reg->hr_steady_iterations, live_threshold + 1);
 
 	hb_task = kthread_run(o2hb_thread, reg, "o2hb-%s",
 			      reg->hr_item.ci_name);
@@ -2275,7 +2300,7 @@ void o2hb_free_hb_set(struct config_group *group)
 	kfree(hs);
 }
 
-/* hb callback registration and issueing */
+/* hb callback registration and issuing */
 
 static struct o2hb_callback *hbcall_from_type(enum o2hb_callback_type type)
 {
diff --git a/fs/ocfs2/cluster/quorum.c b/fs/ocfs2/cluster/quorum.c
index a87366750f2..8f9cea1597a 100644
--- a/fs/ocfs2/cluster/quorum.c
+++ b/fs/ocfs2/cluster/quorum.c
@@ -89,7 +89,7 @@ static void o2quo_fence_self(void)
 	};
 }
 
-/* Indicate that a timeout occured on a hearbeat region write. The
+/* Indicate that a timeout occurred on a hearbeat region write. The
  * other nodes in the cluster may consider us dead at that time so we
  * want to "fence" ourselves so that we don't scribble on the disk
  * after they think they've recovered us. This can't solve all
@@ -261,7 +261,7 @@ void o2quo_hb_still_up(u8 node)
 	spin_unlock(&qs->qs_lock);
 }
 
-/* This is analagous to hb_up.  as a node's connection comes up we delay the
+/* This is analogous to hb_up.  as a node's connection comes up we delay the
  * quorum decision until we see it heartbeating.  the hold will be droped in
  * hb_up or hb_down.  it might be perpetuated by con_err until hb_down.  if
  * it's already heartbeating we we might be dropping a hold that conn_up got.
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index ee04ff5ee60..db5ee4b4f47 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -565,7 +565,7 @@ static void o2net_set_nn_state(struct o2net_node *nn,
 	 * the work queue actually being up. */
 	if (!valid && o2net_wq) {
 		unsigned long delay;
-		/* delay if we're withing a RECONNECT_DELAY of the
+		/* delay if we're within a RECONNECT_DELAY of the
 		 * last attempt */
 		delay = (nn->nn_last_connect_attempt +
 			 msecs_to_jiffies(o2net_reconnect_delay()))
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 9fe5b8fd658..8582e3f4f12 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2868,7 +2868,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 		bytes = blocks_wanted << sb->s_blocksize_bits;
 	struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
 	struct ocfs2_inode_info *oi = OCFS2_I(dir);
-	struct ocfs2_alloc_context *data_ac;
+	struct ocfs2_alloc_context *data_ac = NULL;
 	struct ocfs2_alloc_context *meta_ac = NULL;
 	struct buffer_head *dirdata_bh = NULL;
 	struct buffer_head *dx_root_bh = NULL;
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 7540a492eab..3b179d6cbde 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -1614,7 +1614,8 @@ static int dlm_try_to_join_domain(struct dlm_ctxt *dlm)
 	spin_unlock(&dlm->spinlock);
 
 	/* Support for global heartbeat and node info was added in 1.1 */
-	if (dlm_protocol.pv_major > 1 || dlm_protocol.pv_minor > 0) {
+	if (dlm->dlm_locking_proto.pv_major > 1 ||
+	    dlm->dlm_locking_proto.pv_minor > 0) {
 		status = dlm_send_nodeinfo(dlm, ctxt->yes_resp_map);
 		if (status) {
 			mlog_errno(status);
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 9d67610dfc7..84d166328cf 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -808,7 +808,7 @@ lookup:
 				dlm_mle_detach_hb_events(dlm, mle);
 			dlm_put_mle(mle);
 			mle = NULL;
-			/* this is lame, but we cant wait on either
+			/* this is lame, but we can't wait on either
 			 * the mle or lockres waitqueue here */
 			if (mig)
 				msleep(100);
@@ -843,7 +843,7 @@ lookup:
 
 	/* finally add the lockres to its hash bucket */
 	__dlm_insert_lockres(dlm, res);
-	/* since this lockres is new it doesnt not require the spinlock */
+	/* since this lockres is new it doesn't not require the spinlock */
 	dlm_lockres_grab_inflight_ref_new(dlm, res);
 
 	/* if this node does not become the master make sure to drop
@@ -2574,6 +2574,9 @@ fail:
 		res->state &= ~DLM_LOCK_RES_MIGRATING;
 		wake = 1;
 		spin_unlock(&res->spinlock);
+		if (dlm_is_host_down(ret))
+			dlm_wait_for_node_death(dlm, target,
+						DLM_NODE_DEATH_WAIT_MAX);
 		goto leave;
 	}
 
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 41565ae5285..89659d6dc20 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1607,6 +1607,9 @@ static void ocfs2_calc_trunc_pos(struct inode *inode,
 	range = le32_to_cpu(rec->e_cpos) + ocfs2_rec_clusters(el, rec);
 
 	if (le32_to_cpu(rec->e_cpos) >= trunc_start) {
+		/*
+		 * remove an entire extent record.
+		 */
 		*trunc_cpos = le32_to_cpu(rec->e_cpos);
 		/*
 		 * Skip holes if any.
@@ -1617,7 +1620,16 @@ static void ocfs2_calc_trunc_pos(struct inode *inode,
 		*blkno = le64_to_cpu(rec->e_blkno);
 		*trunc_end = le32_to_cpu(rec->e_cpos);
 	} else if (range > trunc_start) {
+		/*
+		 * remove a partial extent record, which means we're
+		 * removing the last extent record.
+		 */
 		*trunc_cpos = trunc_start;
+		/*
+		 * skip hole if any.
+		 */
+		if (range < *trunc_end)
+			*trunc_end = range;
 		*trunc_len = *trunc_end - trunc_start;
 		coff = trunc_start - le32_to_cpu(rec->e_cpos);
 		*blkno = le64_to_cpu(rec->e_blkno) +
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 177d3a6c2a5..b4c8bb6b8d2 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -835,7 +835,7 @@ static int ocfs2_inode_is_valid_to_delete(struct inode *inode)
 
 	/* If we have allowd wipe of this inode for another node, it
 	 * will be marked here so we can safely skip it. Recovery will
-	 * cleanup any inodes we might inadvertantly skip here. */
+	 * cleanup any inodes we might inadvertently skip here. */
 	if (oi->ip_flags & OCFS2_INODE_SKIP_DELETE)
 		goto bail_unlock;
 
@@ -917,7 +917,7 @@ static int ocfs2_query_inode_wipe(struct inode *inode,
 	 * the inode open lock in ocfs2_read_locked_inode(). When we
 	 * get to ->delete_inode(), each node tries to convert it's
 	 * lock to an exclusive. Trylocks are serialized by the inode
-	 * meta data lock. If the upconvert suceeds, we know the inode
+	 * meta data lock. If the upconvert succeeds, we know the inode
 	 * is no longer live and can be deleted.
 	 *
 	 * Though we call this with the meta data lock held, the
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index dcc2d932715..295d56454e8 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1260,6 +1260,9 @@ void ocfs2_complete_mount_recovery(struct ocfs2_super *osb)
 {
 	struct ocfs2_journal *journal = osb->journal;
 
+	if (ocfs2_is_hard_readonly(osb))
+		return;
+
 	/* No need to queue up our truncate_log as regular cleanup will catch
 	 * that */
 	ocfs2_queue_recovery_completion(journal, osb->slot_num,
@@ -1368,7 +1371,7 @@ skip_recovery:
 		mlog_errno(status);
 
 	/* Now it is right time to recover quotas... We have to do this under
-	 * superblock lock so that noone can start using the slot (and crash)
+	 * superblock lock so that no one can start using the slot (and crash)
 	 * before we recover it */
 	for (i = 0; i < rm_quota_used; i++) {
 		qrec = ocfs2_begin_quota_recovery(osb, rm_quota[i]);
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 6180da1e37e..68cf2f6d3c6 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -215,7 +215,7 @@ static inline void ocfs2_checkpoint_inode(struct inode *inode)
 		/* WARNING: This only kicks off a single
 		 * checkpoint. If someone races you and adds more
 		 * metadata to the journal, you won't know, and will
-		 * wind up waiting *alot* longer than necessary. Right
+		 * wind up waiting *a lot* longer than necessary. Right
 		 * now we only use this in clear_inode so that's
 		 * OK. */
 		ocfs2_start_checkpoint(osb);
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 28f2cc1080d..e5d738cd9cc 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -2128,7 +2128,7 @@ leave:
 }
 
 /**
- * ocfs2_prep_new_orphaned_file() - Prepare the orphan dir to recieve a newly
+ * ocfs2_prep_new_orphaned_file() - Prepare the orphan dir to receive a newly
  * allocated file. This is different from the typical 'add to orphan dir'
  * operation in that the inode does not yet exist. This is a problem because
  * the orphan dir stringifies the inode block number to come up with it's
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index bf2e7764920..938387a10d5 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -441,7 +441,7 @@ static unsigned char ocfs2_type_by_mode[S_IFMT >> S_SHIFT] = {
 struct ocfs2_block_check {
 /*00*/	__le32 bc_crc32e;	/* 802.3 Ethernet II CRC32 */
 	__le16 bc_ecc;		/* Single-error-correction parity vector.
-				   This is a simple Hamming code dependant
+				   This is a simple Hamming code dependent
 				   on the blocksize.  OCFS2's maximum
 				   blocksize, 4K, requires 16 parity bits,
 				   so we fit in __le16. */
@@ -750,7 +750,7 @@ struct ocfs2_dinode {
 							  after an unclean
 							  shutdown */
 		} journal1;
-	} id1;				/* Inode type dependant 1 */
+	} id1;				/* Inode type dependent 1 */
 /*C0*/	union {
 		struct ocfs2_super_block	i_super;
 		struct ocfs2_local_alloc	i_lab;
@@ -1019,7 +1019,7 @@ struct ocfs2_xattr_entry {
 	__le16	xe_name_offset;  /* byte offset from the 1st entry in the
 				    local xattr storage(inode, xattr block or
 				    xattr bucket). */
-	__u8	xe_name_len;	 /* xattr name len, does't include prefix. */
+	__u8	xe_name_len;	 /* xattr name len, doesn't include prefix. */
 	__u8	xe_type;         /* the low 7 bits indicate the name prefix
 				  * type and the highest bit indicates whether
 				  * the EA is stored in the local storage. */
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 279aef68025..92fcd575775 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -556,7 +556,7 @@ int __ocfs2_sync_dquot(struct dquot *dquot, int freeing)
 	spin_unlock(&dq_data_lock);
 	err = ocfs2_qinfo_lock(info, freeing);
 	if (err < 0) {
-		mlog(ML_ERROR, "Failed to lock quota info, loosing quota write"
+		mlog(ML_ERROR, "Failed to lock quota info, losing quota write"
 			       " (type=%d, id=%u)\n", dquot->dq_type,
 			       (unsigned)dquot->dq_id);
 		goto out;
diff --git a/fs/ocfs2/reservations.h b/fs/ocfs2/reservations.h
index 1e49cc29d06..42c2b804f3f 100644
--- a/fs/ocfs2/reservations.h
+++ b/fs/ocfs2/reservations.h
@@ -29,7 +29,7 @@
 struct ocfs2_alloc_reservation {
 	struct rb_node	r_node;
 
-	unsigned int	r_start;	/* Begining of current window */
+	unsigned int	r_start;	/* Beginning of current window */
 	unsigned int	r_len;		/* Length of the window */
 
 	unsigned int	r_last_len;	/* Length of most recent alloc */
diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h
index 8ce7398ae1d..1ec56fdb8d0 100644
--- a/fs/ocfs2/stackglue.h
+++ b/fs/ocfs2/stackglue.h
@@ -126,7 +126,7 @@ struct ocfs2_stack_operations {
 	 *
 	 * ->connect() must not return until it is guaranteed that
 	 *
-	 *  - Node down notifications for the filesystem will be recieved
+	 *  - Node down notifications for the filesystem will be received
 	 *    and passed to conn->cc_recovery_handler().
 	 *  - Locking requests for the filesystem will be processed.
 	 */
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index ab6e2061074..ba5d97e4a73 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -1511,7 +1511,7 @@ static int ocfs2_cluster_group_search(struct inode *inode,
 		max_bits = le16_to_cpu(gd->bg_bits);
 
 		/* Tail groups in cluster bitmaps which aren't cpg
-		 * aligned are prone to partial extention by a failed
+		 * aligned are prone to partial extension by a failed
 		 * fs resize. If the file system resize never got to
 		 * update the dinode cluster count, then we don't want
 		 * to trust any clusters past it, regardless of what
@@ -2459,7 +2459,7 @@ static int _ocfs2_free_suballoc_bits(handle_t *handle,
 	/* The alloc_bh comes from ocfs2_free_dinode() or
 	 * ocfs2_free_clusters().  The callers have all locked the
 	 * allocator and gotten alloc_bh from the lock call.  This
-	 * validates the dinode buffer.  Any corruption that has happended
+	 * validates the dinode buffer.  Any corruption that has happened
 	 * is a code bug. */
 	BUG_ON(!OCFS2_IS_VALID_DINODE(fe));
 	BUG_ON((count + start_bit) > ocfs2_bits_per_group(cl));
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 69fa11b35aa..5a521c74885 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -78,7 +78,7 @@ static struct kmem_cache *ocfs2_inode_cachep = NULL;
 struct kmem_cache *ocfs2_dquot_cachep;
 struct kmem_cache *ocfs2_qf_chunk_cachep;
 
-/* OCFS2 needs to schedule several differnt types of work which
+/* OCFS2 needs to schedule several different types of work which
  * require cluster locking, disk I/O, recovery waits, etc. Since these
  * types of work tend to be heavy we avoid using the kernel events
  * workqueue and schedule on our own. */
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 57a215dc2d9..81ecf9c0bf0 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -3554,7 +3554,7 @@ int ocfs2_xattr_set(struct inode *inode,
 	down_write(&OCFS2_I(inode)->ip_xattr_sem);
 	/*
 	 * Scan inode and external block to find the same name
-	 * extended attribute and collect search infomation.
+	 * extended attribute and collect search information.
 	 */
 	ret = ocfs2_xattr_ibody_find(inode, name_index, name, &xis);
 	if (ret)
@@ -3578,7 +3578,7 @@ int ocfs2_xattr_set(struct inode *inode,
 			goto cleanup;
 	}
 
-	/* Check whether the value is refcounted and do some prepartion. */
+	/* Check whether the value is refcounted and do some preparation. */
 	if (OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL &&
 	    (!xis.not_found || !xbs.not_found)) {
 		ret = ocfs2_prepare_refcount_xattr(inode, di, &xi,
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index ac546975031..d545e97d99c 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -500,7 +500,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
 	/* everything is up and running, commence */
 	rcu_assign_pointer(ptbl->part[partno], p);
 
-	/* suppress uevent if the disk supresses it */
+	/* suppress uevent if the disk suppresses it */
 	if (!dev_get_uevent_suppress(ddev))
 		kobject_uevent(&pdev->kobj, KOBJ_ADD);
 
@@ -585,7 +585,7 @@ rescan:
 	/*
 	 * If any partition code tried to read beyond EOD, try
 	 * unlocking native capacity even if partition table is
-	 * sucessfully read as we could be missing some partitions.
+	 * successfully read as we could be missing some partitions.
 	 */
 	if (state->access_beyond_eod) {
 		printk(KERN_WARNING
diff --git a/fs/partitions/efi.c b/fs/partitions/efi.c
index ac0ccb5026a..19d6750d1d6 100644
--- a/fs/partitions/efi.c
+++ b/fs/partitions/efi.c
@@ -348,6 +348,12 @@ static int is_gpt_valid(struct parsed_partitions *state, u64 lba,
 		goto fail;
 	}
 
+	/* Check that sizeof_partition_entry has the correct value */
+	if (le32_to_cpu((*gpt)->sizeof_partition_entry) != sizeof(gpt_entry)) {
+		pr_debug("GUID Partitition Entry Size check failed.\n");
+		goto fail;
+	}
+
 	if (!(*ptes = alloc_read_gpt_entries(state, *gpt)))
 		goto fail;
 
diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index b10e3540d5b..ce4f6244042 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -1299,6 +1299,11 @@ static bool ldm_frag_add (const u8 *data, int size, struct list_head *frags)
 
 	BUG_ON (!data || !frags);
 
+	if (size < 2 * VBLK_SIZE_HEAD) {
+		ldm_error("Value of size is to small.");
+		return false;
+	}
+
 	group = get_unaligned_be32(data + 0x08);
 	rec   = get_unaligned_be16(data + 0x0C);
 	num   = get_unaligned_be16(data + 0x0E);
@@ -1306,6 +1311,10 @@ static bool ldm_frag_add (const u8 *data, int size, struct list_head *frags)
 		ldm_error ("A VBLK claims to have %d parts.", num);
 		return false;
 	}
+	if (rec >= num) {
+		ldm_error("REC value (%d) exceeds NUM value (%d)", rec, num);
+		return false;
+	}
 
 	list_for_each (item, frags) {
 		f = list_entry (item, struct frag, list);
@@ -1334,10 +1343,9 @@ found:
 
 	f->map |= (1 << rec);
 
-	if (num > 0) {
-		data += VBLK_SIZE_HEAD;
-		size -= VBLK_SIZE_HEAD;
-	}
+	data += VBLK_SIZE_HEAD;
+	size -= VBLK_SIZE_HEAD;
+
 	memcpy (f->data+rec*(size-VBLK_SIZE_HEAD)+VBLK_SIZE_HEAD, data, size);
 
 	return true;
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 5a670c11aea..dfa532730e5 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -220,7 +220,7 @@ static struct mm_struct *__check_mem_permission(struct task_struct *task)
 	}
 
 	/*
-	 * Noone else is allowed.
+	 * No one else is allowed.
 	 */
 	mmput(mm);
 	return ERR_PTR(-EPERM);
@@ -3124,11 +3124,16 @@ static int proc_pid_fill_cache(struct file *filp, void *dirent, filldir_t filldi
 /* for the /proc/ directory itself, after non-process stuff has been done */
 int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir)
 {
-	unsigned int nr = filp->f_pos - FIRST_PROCESS_ENTRY;
-	struct task_struct *reaper = get_proc_task(filp->f_path.dentry->d_inode);
+	unsigned int nr;
+	struct task_struct *reaper;
 	struct tgid_iter iter;
 	struct pid_namespace *ns;
 
+	if (filp->f_pos >= PID_MAX_LIMIT + TGID_OFFSET)
+		goto out_no_task;
+	nr = filp->f_pos - FIRST_PROCESS_ENTRY;
+
+	reaper = get_proc_task(filp->f_path.dentry->d_inode);
 	if (!reaper)
 		goto out_no_task;
 
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 2e7addfd980..318d8654989 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -214,7 +214,7 @@ static void show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
 	int flags = vma->vm_flags;
 	unsigned long ino = 0;
 	unsigned long long pgoff = 0;
-	unsigned long start;
+	unsigned long start, end;
 	dev_t dev = 0;
 	int len;
 
@@ -227,13 +227,15 @@ static void show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
 
 	/* We don't show the stack guard page in /proc/maps */
 	start = vma->vm_start;
-	if (vma->vm_flags & VM_GROWSDOWN)
-		if (!vma_stack_continue(vma->vm_prev, vma->vm_start))
-			start += PAGE_SIZE;
+	if (stack_guard_page_start(vma, start))
+		start += PAGE_SIZE;
+	end = vma->vm_end;
+	if (stack_guard_page_end(vma, end))
+		end -= PAGE_SIZE;
 
 	seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
 			start,
-			vma->vm_end,
+			end,
 			flags & VM_READ ? 'r' : '-',
 			flags & VM_WRITE ? 'w' : '-',
 			flags & VM_EXEC ? 'x' : '-',
diff --git a/fs/pstore/Kconfig b/fs/pstore/Kconfig
index 867d0ac026c..8007ae7c0d8 100644
--- a/fs/pstore/Kconfig
+++ b/fs/pstore/Kconfig
@@ -1,5 +1,5 @@
 config PSTORE
-	bool "Persistant store support"
+	bool "Persistent store support"
 	default n
 	help
 	   This option enables generic access to platform level
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index f835a25625f..f2c3ff20ea6 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -152,21 +152,27 @@ EXPORT_SYMBOL_GPL(pstore_register);
 void pstore_get_records(void)
 {
 	struct pstore_info *psi = psinfo;
-	size_t			size;
+	ssize_t			size;
 	u64			id;
 	enum pstore_type_id	type;
 	struct timespec		time;
-	int			failed = 0;
+	int			failed = 0, rc;
 
 	if (!psi)
 		return;
 
 	mutex_lock(&psinfo->buf_mutex);
+	rc = psi->open(psi);
+	if (rc)
+		goto out;
+
 	while ((size = psi->read(&id, &type, &time)) > 0) {
-		if (pstore_mkfile(type, psi->name, id, psi->buf, size,
+		if (pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size,
 				  time, psi->erase))
 			failed++;
 	}
+	psi->close(psi);
+out:
 	mutex_unlock(&psinfo->buf_mutex);
 
 	if (failed)
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index fcc8ae75d87..d3c032f5fa0 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -442,7 +442,7 @@ EXPORT_SYMBOL(dquot_acquire);
  */
 int dquot_commit(struct dquot *dquot)
 {
-	int ret = 0, ret2 = 0;
+	int ret = 0;
 	struct quota_info *dqopt = sb_dqopt(dquot->dq_sb);
 
 	mutex_lock(&dqopt->dqio_mutex);
@@ -454,15 +454,10 @@ int dquot_commit(struct dquot *dquot)
 	spin_unlock(&dq_list_lock);
 	/* Inactive dquot can be only if there was error during read/init
 	 * => we have better not writing it */
-	if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
+	if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
 		ret = dqopt->ops[dquot->dq_type]->commit_dqblk(dquot);
-		if (info_dirty(&dqopt->info[dquot->dq_type])) {
-			ret2 = dqopt->ops[dquot->dq_type]->write_file_info(
-						dquot->dq_sb, dquot->dq_type);
-		}
-		if (ret >= 0)
-			ret = ret2;
-	}
+	else
+		ret = -EIO;
 out_sem:
 	mutex_unlock(&dqopt->dqio_mutex);
 	return ret;
@@ -956,7 +951,7 @@ static inline int dqput_blocks(struct dquot *dquot)
 
 /*
  * Remove references to dquots from inode and add dquot to list for freeing
- * if we have the last referece to dquot
+ * if we have the last reference to dquot
  * We can't race with anybody because we hold dqptr_sem for writing...
  */
 static int remove_inode_dquot_ref(struct inode *inode, int type,
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 9eead2c796b..fbb0b478a34 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -112,6 +112,7 @@ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
 		SetPageDirty(page);
 
 		unlock_page(page);
+		put_page(page);
 	}
 
 	return 0;
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index c77514bd577..c5e82ece7c6 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -1,7 +1,7 @@
 /*
 ** Write ahead logging implementation copyright Chris Mason 2000
 **
-** The background commits make this code very interelated, and
+** The background commits make this code very interrelated, and
 ** overly complex.  I need to rethink things a bit....The major players:
 **
 ** journal_begin -- call with the number of blocks you expect to log.
@@ -2725,7 +2725,7 @@ int journal_init(struct super_block *sb, const char *j_dev_name,
 						 REISERFS_DISK_OFFSET_IN_BYTES /
 						 sb->s_blocksize + 2);
 
-	/* Sanity check to see is the standard journal fitting withing first bitmap
+	/* Sanity check to see is the standard journal fitting within first bitmap
 	   (actual for small blocksizes) */
 	if (!SB_ONDISK_JOURNAL_DEVICE(sb) &&
 	    (SB_JOURNAL_1st_RESERVED_BLOCK(sb) +
diff --git a/fs/reiserfs/lock.c b/fs/reiserfs/lock.c
index b87aa2c1afc..7df1ce48203 100644
--- a/fs/reiserfs/lock.c
+++ b/fs/reiserfs/lock.c
@@ -15,7 +15,7 @@
  * for this mutex, no need for a system wide mutex facility.
  *
  * Also this lock is often released before a call that could block because
- * reiserfs performances were partialy based on the release while schedule()
+ * reiserfs performances were partially based on the release while schedule()
  * property of the Bkl.
  */
 void reiserfs_write_lock(struct super_block *s)
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 0aab04f4682..b216ff6be1c 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -393,7 +393,7 @@ void add_save_link(struct reiserfs_transaction_handle *th,
 	/* body of "save" link */
 	link = INODE_PKEY(inode)->k_dir_id;
 
-	/* put "save" link inot tree, don't charge quota to anyone */
+	/* put "save" link into tree, don't charge quota to anyone */
 	retval =
 	    reiserfs_insert_item(th, &path, &key, &ih, NULL, (char *)&link);
 	if (retval) {
@@ -2104,7 +2104,7 @@ out:
 
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
  * acquiring the locks... As quota files are never truncated and quota code
- * itself serializes the operations (and noone else should touch the files)
+ * itself serializes the operations (and no one else should touch the files)
  * we don't have to be afraid of races */
 static ssize_t reiserfs_quota_read(struct super_block *sb, int type, char *data,
 				   size_t len, loff_t off)
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 5c11ca82b78..47d2a4498b0 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -396,7 +396,7 @@ static struct page *reiserfs_get_page(struct inode *dir, size_t n)
 	struct address_space *mapping = dir->i_mapping;
 	struct page *page;
 	/* We can deadlock if we try to free dentries,
-	   and an unlink/rmdir has just occured - GFP_NOFS avoids this */
+	   and an unlink/rmdir has just occurred - GFP_NOFS avoids this */
 	mapping_set_gfp_mask(mapping, GFP_NOFS);
 	page = read_mapping_page(mapping, n >> PAGE_CACHE_SHIFT, NULL);
 	if (!IS_ERR(page)) {
diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index 26b15ae34d6..c37b520132f 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -104,7 +104,7 @@ struct squashfs_cache_entry *squashfs_cache_get(struct super_block *sb,
 			entry = &cache->entry[i];
 
 			/*
-			 * Initialise choosen cache entry, and fill it in from
+			 * Initialise chosen cache entry, and fill it in from
 			 * disk.
 			 */
 			cache->unused--;
@@ -286,7 +286,7 @@ cleanup:
 
 
 /*
- * Copy upto length bytes from cache entry to buffer starting at offset bytes
+ * Copy up to length bytes from cache entry to buffer starting at offset bytes
  * into the cache entry.  If there's not length bytes then copy the number of
  * bytes available.  In all cases return the number of bytes copied.
  */
diff --git a/fs/super.c b/fs/super.c
index 8a06881b192..c04f7e0b7ed 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -948,8 +948,7 @@ mount_fs(struct file_system_type *type, int flags, const char *name, void *data)
 	 * filesystems should never set s_maxbytes larger than MAX_LFS_FILESIZE
 	 * but s_maxbytes was an unsigned long long for many releases. Throw
 	 * this warning for a little while to try and catch filesystems that
-	 * violate this rule. This warning should be either removed or
-	 * converted to a BUG() in 2.6.34.
+	 * violate this rule.
 	 */
 	WARN((sb->s_maxbytes < 0), "%s set sb->s_maxbytes to "
 		"negative value (%lld)\n", type->name, sb->s_maxbytes);
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index da3fefe91a8..1ad8c93c1b8 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -24,13 +24,6 @@
 
 #include "sysfs.h"
 
-/* used in crash dumps to help with debugging */
-static char last_sysfs_file[PATH_MAX];
-void sysfs_printk_last_file(void)
-{
-	printk(KERN_EMERG "last sysfs file: %s\n", last_sysfs_file);
-}
-
 /*
  * There's one sysfs_buffer for each open file and one
  * sysfs_open_dirent for each sysfs_dirent with one or more open
@@ -337,11 +330,6 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
 	struct sysfs_buffer *buffer;
 	const struct sysfs_ops *ops;
 	int error = -EACCES;
-	char *p;
-
-	p = d_path(&file->f_path, last_sysfs_file, sizeof(last_sysfs_file));
-	if (!IS_ERR(p))
-		memmove(last_sysfs_file, p, strlen(p) + 1);
 
 	/* need attr_sd for attr and ops, its parent for kobj */
 	if (!sysfs_get_active(attr_sd))
diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c
index c8769dc222d..194414f8298 100644
--- a/fs/sysfs/group.c
+++ b/fs/sysfs/group.c
@@ -101,9 +101,9 @@ int sysfs_create_group(struct kobject *kobj,
 }
 
 /**
- * sysfs_update_group - given a directory kobject, create an attribute group
- * @kobj:	The kobject to create the group on
- * @grp:	The attribute group to create
+ * sysfs_update_group - given a directory kobject, update an attribute group
+ * @kobj:	The kobject to update the group on
+ * @grp:	The attribute group to update
  *
  * This function updates an attribute group.  Unlike
  * sysfs_create_group(), it will explicitly not warn or error if any
diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig
index d7440904be1..f8b0160da2d 100644
--- a/fs/ubifs/Kconfig
+++ b/fs/ubifs/Kconfig
@@ -47,7 +47,7 @@ config UBIFS_FS_DEBUG
 	bool "Enable debugging support"
 	depends on UBIFS_FS
 	select DEBUG_FS
-	select KALLSYMS_ALL
+	select KALLSYMS
 	help
 	  This option enables UBIFS debugging support. It makes sure various
 	  assertions, self-checks, debugging messages and test modes are compiled
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index c8ff0d1ae5d..8b3a7da531e 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -147,7 +147,7 @@ static int make_free_space(struct ubifs_info *c)
 		if (liab2 < liab1)
 			return -EAGAIN;
 
-		dbg_budg("new liability %lld (not shrinked)", liab2);
+		dbg_budg("new liability %lld (not shrunk)", liab2);
 
 		/* Liability did not shrink again, try GC */
 		dbg_budg("Run GC");
diff --git a/fs/ubifs/commit.c b/fs/ubifs/commit.c
index b148fbc80f8..1bd01ded712 100644
--- a/fs/ubifs/commit.c
+++ b/fs/ubifs/commit.c
@@ -577,7 +577,7 @@ int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot)
 	size_t sz;
 
 	if (!(ubifs_chk_flags & UBIFS_CHK_OLD_IDX))
-		goto out;
+		return 0;
 
 	INIT_LIST_HEAD(&list);
 
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index f25a7339f80..004d3745dc4 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -972,11 +972,39 @@ void dbg_dump_index(struct ubifs_info *c)
 void dbg_save_space_info(struct ubifs_info *c)
 {
 	struct ubifs_debug_info *d = c->dbg;
-
-	ubifs_get_lp_stats(c, &d->saved_lst);
+	int freeable_cnt;
 
 	spin_lock(&c->space_lock);
+	memcpy(&d->saved_lst, &c->lst, sizeof(struct ubifs_lp_stats));
+
+	/*
+	 * We use a dirty hack here and zero out @c->freeable_cnt, because it
+	 * affects the free space calculations, and UBIFS might not know about
+	 * all freeable eraseblocks. Indeed, we know about freeable eraseblocks
+	 * only when we read their lprops, and we do this only lazily, upon the
+	 * need. So at any given point of time @c->freeable_cnt might be not
+	 * exactly accurate.
+	 *
+	 * Just one example about the issue we hit when we did not zero
+	 * @c->freeable_cnt.
+	 * 1. The file-system is mounted R/O, c->freeable_cnt is %0. We save the
+	 *    amount of free space in @d->saved_free
+	 * 2. We re-mount R/W, which makes UBIFS to read the "lsave"
+	 *    information from flash, where we cache LEBs from various
+	 *    categories ('ubifs_remount_fs()' -> 'ubifs_lpt_init()'
+	 *    -> 'lpt_init_wr()' -> 'read_lsave()' -> 'ubifs_lpt_lookup()'
+	 *    -> 'ubifs_get_pnode()' -> 'update_cats()'
+	 *    -> 'ubifs_add_to_cat()').
+	 * 3. Lsave contains a freeable eraseblock, and @c->freeable_cnt
+	 *    becomes %1.
+	 * 4. We calculate the amount of free space when the re-mount is
+	 *    finished in 'dbg_check_space_info()' and it does not match
+	 *    @d->saved_free.
+	 */
+	freeable_cnt = c->freeable_cnt;
+	c->freeable_cnt = 0;
 	d->saved_free = ubifs_get_free_space_nolock(c);
+	c->freeable_cnt = freeable_cnt;
 	spin_unlock(&c->space_lock);
 }
 
@@ -993,12 +1021,15 @@ int dbg_check_space_info(struct ubifs_info *c)
 {
 	struct ubifs_debug_info *d = c->dbg;
 	struct ubifs_lp_stats lst;
-	long long avail, free;
+	long long free;
+	int freeable_cnt;
 
 	spin_lock(&c->space_lock);
-	avail = ubifs_calc_available(c, c->min_idx_lebs);
+	freeable_cnt = c->freeable_cnt;
+	c->freeable_cnt = 0;
+	free = ubifs_get_free_space_nolock(c);
+	c->freeable_cnt = freeable_cnt;
 	spin_unlock(&c->space_lock);
-	free = ubifs_get_free_space(c);
 
 	if (free != d->saved_free) {
 		ubifs_err("free space changed from %lld to %lld",
@@ -2806,40 +2837,38 @@ int dbg_debugfs_init_fs(struct ubifs_info *c)
 	struct ubifs_debug_info *d = c->dbg;
 
 	sprintf(d->dfs_dir_name, "ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
-	d->dfs_dir = debugfs_create_dir(d->dfs_dir_name, dfs_rootdir);
-	if (IS_ERR(d->dfs_dir)) {
-		err = PTR_ERR(d->dfs_dir);
-		ubifs_err("cannot create \"%s\" debugfs directory, error %d\n",
-			  d->dfs_dir_name, err);
+	fname = d->dfs_dir_name;
+	dent = debugfs_create_dir(fname, dfs_rootdir);
+	if (IS_ERR_OR_NULL(dent))
 		goto out;
-	}
+	d->dfs_dir = dent;
 
 	fname = "dump_lprops";
 	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
-	if (IS_ERR(dent))
+	if (IS_ERR_OR_NULL(dent))
 		goto out_remove;
 	d->dfs_dump_lprops = dent;
 
 	fname = "dump_budg";
 	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
-	if (IS_ERR(dent))
+	if (IS_ERR_OR_NULL(dent))
 		goto out_remove;
 	d->dfs_dump_budg = dent;
 
 	fname = "dump_tnc";
 	dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
-	if (IS_ERR(dent))
+	if (IS_ERR_OR_NULL(dent))
 		goto out_remove;
 	d->dfs_dump_tnc = dent;
 
 	return 0;
 
 out_remove:
-	err = PTR_ERR(dent);
-	ubifs_err("cannot create \"%s\" debugfs directory, error %d\n",
-		  fname, err);
 	debugfs_remove_recursive(d->dfs_dir);
 out:
+	err = dent ? PTR_ERR(dent) : -ENODEV;
+	ubifs_err("cannot create \"%s\" debugfs directory, error %d\n",
+		  fname, err);
 	return err;
 }
 
diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h
index 919f0de29d8..e6493cac193 100644
--- a/fs/ubifs/debug.h
+++ b/fs/ubifs/debug.h
@@ -23,6 +23,12 @@
 #ifndef __UBIFS_DEBUG_H__
 #define __UBIFS_DEBUG_H__
 
+/* Checking helper functions */
+typedef int (*dbg_leaf_callback)(struct ubifs_info *c,
+				 struct ubifs_zbranch *zbr, void *priv);
+typedef int (*dbg_znode_callback)(struct ubifs_info *c,
+				  struct ubifs_znode *znode, void *priv);
+
 #ifdef CONFIG_UBIFS_FS_DEBUG
 
 /**
@@ -270,11 +276,6 @@ void dbg_dump_tnc(struct ubifs_info *c);
 void dbg_dump_index(struct ubifs_info *c);
 void dbg_dump_lpt_lebs(const struct ubifs_info *c);
 
-/* Checking helper functions */
-typedef int (*dbg_leaf_callback)(struct ubifs_info *c,
-				 struct ubifs_zbranch *zbr, void *priv);
-typedef int (*dbg_znode_callback)(struct ubifs_info *c,
-				  struct ubifs_znode *znode, void *priv);
 int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb,
 		   dbg_znode_callback znode_cb, void *priv);
 
@@ -295,7 +296,6 @@ int dbg_check_idx_size(struct ubifs_info *c, long long idx_size);
 int dbg_check_filesystem(struct ubifs_info *c);
 void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat,
 		    int add_pos);
-int dbg_check_lprops(struct ubifs_info *c);
 int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
 			int row, int col);
 int dbg_check_inode_size(struct ubifs_info *c, const struct inode *inode,
@@ -401,58 +401,94 @@ void dbg_debugfs_exit_fs(struct ubifs_info *c);
 #define DBGKEY(key)  ((char *)(key))
 #define DBGKEY1(key) ((char *)(key))
 
-#define ubifs_debugging_init(c)                0
-#define ubifs_debugging_exit(c)                ({})
-
-#define dbg_ntype(type)                        ""
-#define dbg_cstate(cmt_state)                  ""
-#define dbg_jhead(jhead)                       ""
-#define dbg_get_key_dump(c, key)               ({})
-#define dbg_dump_inode(c, inode)               ({})
-#define dbg_dump_node(c, node)                 ({})
-#define dbg_dump_lpt_node(c, node, lnum, offs) ({})
-#define dbg_dump_budget_req(req)               ({})
-#define dbg_dump_lstats(lst)                   ({})
-#define dbg_dump_budg(c)                       ({})
-#define dbg_dump_lprop(c, lp)                  ({})
-#define dbg_dump_lprops(c)                     ({})
-#define dbg_dump_lpt_info(c)                   ({})
-#define dbg_dump_leb(c, lnum)                  ({})
-#define dbg_dump_znode(c, znode)               ({})
-#define dbg_dump_heap(c, heap, cat)            ({})
-#define dbg_dump_pnode(c, pnode, parent, iip)  ({})
-#define dbg_dump_tnc(c)                        ({})
-#define dbg_dump_index(c)                      ({})
-#define dbg_dump_lpt_lebs(c)                   ({})
-
-#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
-#define dbg_old_index_check_init(c, zroot)         0
-#define dbg_save_space_info(c)                     ({})
-#define dbg_check_space_info(c)                    0
-#define dbg_check_old_index(c, zroot)              0
-#define dbg_check_cats(c)                          0
-#define dbg_check_ltab(c)                          0
-#define dbg_chk_lpt_free_spc(c)                    0
-#define dbg_chk_lpt_sz(c, action, len)             0
-#define dbg_check_synced_i_size(inode)             0
-#define dbg_check_dir_size(c, dir)                 0
-#define dbg_check_tnc(c, x)                        0
-#define dbg_check_idx_size(c, idx_size)            0
-#define dbg_check_filesystem(c)                    0
-#define dbg_check_heap(c, heap, cat, add_pos)      ({})
-#define dbg_check_lprops(c)                        0
-#define dbg_check_lpt_nodes(c, cnode, row, col)    0
-#define dbg_check_inode_size(c, inode, size)       0
-#define dbg_check_data_nodes_order(c, head)        0
-#define dbg_check_nondata_nodes_order(c, head)     0
-#define dbg_force_in_the_gaps_enabled              0
-#define dbg_force_in_the_gaps()                    0
-#define dbg_failure_mode                           0
-
-#define dbg_debugfs_init()                         0
-#define dbg_debugfs_exit()
-#define dbg_debugfs_init_fs(c)                     0
-#define dbg_debugfs_exit_fs(c)                     0
+static inline int ubifs_debugging_init(struct ubifs_info *c)      { return 0; }
+static inline void ubifs_debugging_exit(struct ubifs_info *c)     { return; }
+static inline const char *dbg_ntype(int type)                     { return ""; }
+static inline const char *dbg_cstate(int cmt_state)               { return ""; }
+static inline const char *dbg_jhead(int jhead)                    { return ""; }
+static inline const char *
+dbg_get_key_dump(const struct ubifs_info *c,
+		 const union ubifs_key *key)                      { return ""; }
+static inline void dbg_dump_inode(const struct ubifs_info *c,
+				  const struct inode *inode)      { return; }
+static inline void dbg_dump_node(const struct ubifs_info *c,
+				 const void *node)                { return; }
+static inline void dbg_dump_lpt_node(const struct ubifs_info *c,
+				     void *node, int lnum,
+				     int offs)                    { return; }
+static inline void
+dbg_dump_budget_req(const struct ubifs_budget_req *req)           { return; }
+static inline void
+dbg_dump_lstats(const struct ubifs_lp_stats *lst)                 { return; }
+static inline void dbg_dump_budg(struct ubifs_info *c)            { return; }
+static inline void dbg_dump_lprop(const struct ubifs_info *c,
+				  const struct ubifs_lprops *lp)  { return; }
+static inline void dbg_dump_lprops(struct ubifs_info *c)          { return; }
+static inline void dbg_dump_lpt_info(struct ubifs_info *c)        { return; }
+static inline void dbg_dump_leb(const struct ubifs_info *c,
+				int lnum)                         { return; }
+static inline void
+dbg_dump_znode(const struct ubifs_info *c,
+	       const struct ubifs_znode *znode)                   { return; }
+static inline void dbg_dump_heap(struct ubifs_info *c,
+				 struct ubifs_lpt_heap *heap,
+				 int cat)                         { return; }
+static inline void dbg_dump_pnode(struct ubifs_info *c,
+				  struct ubifs_pnode *pnode,
+				  struct ubifs_nnode *parent,
+				  int iip)                        { return; }
+static inline void dbg_dump_tnc(struct ubifs_info *c)             { return; }
+static inline void dbg_dump_index(struct ubifs_info *c)           { return; }
+static inline void dbg_dump_lpt_lebs(const struct ubifs_info *c)  { return; }
+
+static inline int dbg_walk_index(struct ubifs_info *c,
+				 dbg_leaf_callback leaf_cb,
+				 dbg_znode_callback znode_cb,
+				 void *priv)                      { return 0; }
+static inline void dbg_save_space_info(struct ubifs_info *c)      { return; }
+static inline int dbg_check_space_info(struct ubifs_info *c)      { return 0; }
+static inline int dbg_check_lprops(struct ubifs_info *c)          { return 0; }
+static inline int
+dbg_old_index_check_init(struct ubifs_info *c,
+			 struct ubifs_zbranch *zroot)             { return 0; }
+static inline int
+dbg_check_old_index(struct ubifs_info *c,
+		    struct ubifs_zbranch *zroot)                  { return 0; }
+static inline int dbg_check_cats(struct ubifs_info *c)            { return 0; }
+static inline int dbg_check_ltab(struct ubifs_info *c)            { return 0; }
+static inline int dbg_chk_lpt_free_spc(struct ubifs_info *c)      { return 0; }
+static inline int dbg_chk_lpt_sz(struct ubifs_info *c,
+				 int action, int len)             { return 0; }
+static inline int dbg_check_synced_i_size(struct inode *inode)    { return 0; }
+static inline int dbg_check_dir_size(struct ubifs_info *c,
+				     const struct inode *dir)     { return 0; }
+static inline int dbg_check_tnc(struct ubifs_info *c, int extra)  { return 0; }
+static inline int dbg_check_idx_size(struct ubifs_info *c,
+				     long long idx_size)          { return 0; }
+static inline int dbg_check_filesystem(struct ubifs_info *c)      { return 0; }
+static inline void dbg_check_heap(struct ubifs_info *c,
+				  struct ubifs_lpt_heap *heap,
+				  int cat, int add_pos)           { return; }
+static inline int dbg_check_lpt_nodes(struct ubifs_info *c,
+	struct ubifs_cnode *cnode, int row, int col)              { return 0; }
+static inline int dbg_check_inode_size(struct ubifs_info *c,
+				       const struct inode *inode,
+				       loff_t size)               { return 0; }
+static inline int
+dbg_check_data_nodes_order(struct ubifs_info *c,
+			   struct list_head *head)                { return 0; }
+static inline int
+dbg_check_nondata_nodes_order(struct ubifs_info *c,
+			      struct list_head *head)             { return 0; }
+
+static inline int dbg_force_in_the_gaps(void)                     { return 0; }
+#define dbg_force_in_the_gaps_enabled 0
+#define dbg_failure_mode              0
+
+static inline int dbg_debugfs_init(void)                          { return 0; }
+static inline void dbg_debugfs_exit(void)                         { return; }
+static inline int dbg_debugfs_init_fs(struct ubifs_info *c)       { return 0; }
+static inline int dbg_debugfs_exit_fs(struct ubifs_info *c)       { return 0; }
 
 #endif /* !CONFIG_UBIFS_FS_DEBUG */
 #endif /* !__UBIFS_DEBUG_H__ */
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 28be1e6a65e..b286db79c68 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -1312,6 +1312,9 @@ int ubifs_fsync(struct file *file, int datasync)
 
 	dbg_gen("syncing inode %lu", inode->i_ino);
 
+	if (inode->i_sb->s_flags & MS_RDONLY)
+		return 0;
+
 	/*
 	 * VFS has already synchronized dirty pages for this inode. Synchronize
 	 * the inode unless this is a 'datasync()' call.
diff --git a/fs/ubifs/log.c b/fs/ubifs/log.c
index 4d0cb124146..40fa780ebea 100644
--- a/fs/ubifs/log.c
+++ b/fs/ubifs/log.c
@@ -175,26 +175,6 @@ void ubifs_add_bud(struct ubifs_info *c, struct ubifs_bud *bud)
 }
 
 /**
- * ubifs_create_buds_lists - create journal head buds lists for remount rw.
- * @c: UBIFS file-system description object
- */
-void ubifs_create_buds_lists(struct ubifs_info *c)
-{
-	struct rb_node *p;
-
-	spin_lock(&c->buds_lock);
-	p = rb_first(&c->buds);
-	while (p) {
-		struct ubifs_bud *bud = rb_entry(p, struct ubifs_bud, rb);
-		struct ubifs_jhead *jhead = &c->jheads[bud->jhead];
-
-		list_add_tail(&bud->list, &jhead->buds_list);
-		p = rb_next(p);
-	}
-	spin_unlock(&c->buds_lock);
-}
-
-/**
  * ubifs_add_bud_to_log - add a new bud to the log.
  * @c: UBIFS file-system description object
  * @jhead: journal head the bud belongs to
diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c
index 72775d35b99..ef5155e109a 100644
--- a/fs/ubifs/lpt.c
+++ b/fs/ubifs/lpt.c
@@ -1270,10 +1270,9 @@ static int read_pnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip)
 	lnum = branch->lnum;
 	offs = branch->offs;
 	pnode = kzalloc(sizeof(struct ubifs_pnode), GFP_NOFS);
-	if (!pnode) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!pnode)
+		return -ENOMEM;
+
 	if (lnum == 0) {
 		/*
 		 * This pnode was not written which just means that the LEB
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index 936f2cbfe6b..3dbad6fbd1e 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -317,6 +317,32 @@ int ubifs_recover_master_node(struct ubifs_info *c)
 			goto out_free;
 		}
 		memcpy(c->rcvrd_mst_node, c->mst_node, UBIFS_MST_NODE_SZ);
+
+		/*
+		 * We had to recover the master node, which means there was an
+		 * unclean reboot. However, it is possible that the master node
+		 * is clean at this point, i.e., %UBIFS_MST_DIRTY is not set.
+		 * E.g., consider the following chain of events:
+		 *
+		 * 1. UBIFS was cleanly unmounted, so the master node is clean
+		 * 2. UBIFS is being mounted R/W and starts changing the master
+		 *    node in the first (%UBIFS_MST_LNUM). A power cut happens,
+		 *    so this LEB ends up with some amount of garbage at the
+		 *    end.
+		 * 3. UBIFS is being mounted R/O. We reach this place and
+		 *    recover the master node from the second LEB
+		 *    (%UBIFS_MST_LNUM + 1). But we cannot update the media
+		 *    because we are being mounted R/O. We have to defer the
+		 *    operation.
+		 * 4. However, this master node (@c->mst_node) is marked as
+		 *    clean (since the step 1). And if we just return, the
+		 *    mount code will be confused and won't recover the master
+		 *    node when it is re-mounter R/W later.
+		 *
+		 *    Thus, to force the recovery by marking the master node as
+		 *    dirty.
+		 */
+		c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
 	} else {
 		/* Write the recovered master node */
 		c->max_sqnum = le64_to_cpu(mst->ch.sqnum) - 1;
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index eed0fcff8d7..d3d6d365bfc 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -59,6 +59,7 @@ enum {
  * @new_size: truncation new size
  * @free: amount of free space in a bud
  * @dirty: amount of dirty space in a bud from padding and deletion nodes
+ * @jhead: journal head number of the bud
  *
  * UBIFS journal replay must compare node sequence numbers, which means it must
  * build a tree of node information to insert into the TNC.
@@ -80,6 +81,7 @@ struct replay_entry {
 		struct {
 			int free;
 			int dirty;
+			int jhead;
 		};
 	};
 };
@@ -159,6 +161,11 @@ static int set_bud_lprops(struct ubifs_info *c, struct replay_entry *r)
 		err = PTR_ERR(lp);
 		goto out;
 	}
+
+	/* Make sure the journal head points to the latest bud */
+	err = ubifs_wbuf_seek_nolock(&c->jheads[r->jhead].wbuf, r->lnum,
+				     c->leb_size - r->free, UBI_SHORTTERM);
+
 out:
 	ubifs_release_lprops(c);
 	return err;
@@ -627,10 +634,6 @@ static int replay_bud(struct ubifs_info *c, int lnum, int offs, int jhead,
 	ubifs_assert(sleb->endpt - offs >= used);
 	ubifs_assert(sleb->endpt % c->min_io_size == 0);
 
-	if (sleb->endpt + c->min_io_size <= c->leb_size && !c->ro_mount)
-		err = ubifs_wbuf_seek_nolock(&c->jheads[jhead].wbuf, lnum,
-					     sleb->endpt, UBI_SHORTTERM);
-
 	*dirty = sleb->endpt - offs - used;
 	*free = c->leb_size - sleb->endpt;
 
@@ -653,12 +656,14 @@ out_dump:
  * @sqnum: sequence number
  * @free: amount of free space in bud
  * @dirty: amount of dirty space from padding and deletion nodes
+ * @jhead: journal head number for the bud
  *
  * This function inserts a reference node to the replay tree and returns zero
  * in case of success or a negative error code in case of failure.
  */
 static int insert_ref_node(struct ubifs_info *c, int lnum, int offs,
-			   unsigned long long sqnum, int free, int dirty)
+			   unsigned long long sqnum, int free, int dirty,
+			   int jhead)
 {
 	struct rb_node **p = &c->replay_tree.rb_node, *parent = NULL;
 	struct replay_entry *r;
@@ -688,6 +693,7 @@ static int insert_ref_node(struct ubifs_info *c, int lnum, int offs,
 	r->flags = REPLAY_REF;
 	r->free = free;
 	r->dirty = dirty;
+	r->jhead = jhead;
 
 	rb_link_node(&r->rb, parent, p);
 	rb_insert_color(&r->rb, &c->replay_tree);
@@ -712,7 +718,7 @@ static int replay_buds(struct ubifs_info *c)
 		if (err)
 			return err;
 		err = insert_ref_node(c, b->bud->lnum, b->bud->start, b->sqnum,
-				      free, dirty);
+				      free, dirty, b->bud->jhead);
 		if (err)
 			return err;
 	}
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 6ddd9973e68..04ad07f4fcc 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1257,12 +1257,12 @@ static int mount_ubifs(struct ubifs_info *c)
 		goto out_free;
 	}
 
+	err = alloc_wbufs(c);
+	if (err)
+		goto out_cbuf;
+
 	sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id);
 	if (!c->ro_mount) {
-		err = alloc_wbufs(c);
-		if (err)
-			goto out_cbuf;
-
 		/* Create background thread */
 		c->bgt = kthread_create(ubifs_bg_thread, c, "%s", c->bgt_name);
 		if (IS_ERR(c->bgt)) {
@@ -1568,6 +1568,7 @@ static int ubifs_remount_rw(struct ubifs_info *c)
 	mutex_lock(&c->umount_mutex);
 	dbg_save_space_info(c);
 	c->remounting_rw = 1;
+	c->ro_mount = 0;
 
 	err = check_free_space(c);
 	if (err)
@@ -1630,12 +1631,6 @@ static int ubifs_remount_rw(struct ubifs_info *c)
 	if (err)
 		goto out;
 
-	err = alloc_wbufs(c);
-	if (err)
-		goto out;
-
-	ubifs_create_buds_lists(c);
-
 	/* Create background thread */
 	c->bgt = kthread_create(ubifs_bg_thread, c, "%s", c->bgt_name);
 	if (IS_ERR(c->bgt)) {
@@ -1670,19 +1665,30 @@ static int ubifs_remount_rw(struct ubifs_info *c)
 	if (err)
 		goto out;
 
+	dbg_gen("re-mounted read-write");
+	c->remounting_rw = 0;
+
 	if (c->need_recovery) {
 		c->need_recovery = 0;
 		ubifs_msg("deferred recovery completed");
+	} else {
+		/*
+		 * Do not run the debugging space check if the were doing
+		 * recovery, because when we saved the information we had the
+		 * file-system in a state where the TNC and lprops has been
+		 * modified in memory, but all the I/O operations (including a
+		 * commit) were deferred. So the file-system was in
+		 * "non-committed" state. Now the file-system is in committed
+		 * state, and of course the amount of free space will change
+		 * because, for example, the old index size was imprecise.
+		 */
+		err = dbg_check_space_info(c);
 	}
-
-	dbg_gen("re-mounted read-write");
-	c->ro_mount = 0;
-	c->remounting_rw = 0;
-	err = dbg_check_space_info(c);
 	mutex_unlock(&c->umount_mutex);
 	return err;
 
 out:
+	c->ro_mount = 1;
 	vfree(c->orph_buf);
 	c->orph_buf = NULL;
 	if (c->bgt) {
@@ -1732,7 +1738,6 @@ static void ubifs_remount_ro(struct ubifs_info *c)
 	if (err)
 		ubifs_ro_mode(c, err);
 
-	free_wbufs(c);
 	vfree(c->orph_buf);
 	c->orph_buf = NULL;
 	kfree(c->write_reserve_buf);
@@ -1760,10 +1765,12 @@ static void ubifs_put_super(struct super_block *sb)
 	 * of the media. For example, there will be dirty inodes if we failed
 	 * to write them back because of I/O errors.
 	 */
-	ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0);
-	ubifs_assert(c->budg_idx_growth == 0);
-	ubifs_assert(c->budg_dd_growth == 0);
-	ubifs_assert(c->budg_data_growth == 0);
+	if (!c->ro_error) {
+		ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0);
+		ubifs_assert(c->budg_idx_growth == 0);
+		ubifs_assert(c->budg_dd_growth == 0);
+		ubifs_assert(c->budg_data_growth == 0);
+	}
 
 	/*
 	 * The 'c->umount_lock' prevents races between UBIFS memory shrinker
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index c74400f88fe..3299f469e71 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -56,6 +56,7 @@
  */
 
 #include "ubifs.h"
+#include <linux/fs.h>
 #include <linux/slab.h>
 #include <linux/xattr.h>
 #include <linux/posix_acl_xattr.h>
@@ -80,7 +81,6 @@ enum {
 };
 
 static const struct inode_operations none_inode_operations;
-static const struct address_space_operations none_address_operations;
 static const struct file_operations none_file_operations;
 
 /**
@@ -130,7 +130,7 @@ static int create_xattr(struct ubifs_info *c, struct inode *host,
 	}
 
 	/* Re-define all operations to be "nothing" */
-	inode->i_mapping->a_ops = &none_address_operations;
+	inode->i_mapping->a_ops = &empty_aops;
 	inode->i_op = &none_inode_operations;
 	inode->i_fop = &none_file_operations;
 
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 27a4babe7df..e765743cf9f 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -78,7 +78,7 @@ static int ufs_block_to_path(struct inode *inode, sector_t i_block, sector_t off
 
 /*
  * Returns the location of the fragment from
- * the begining of the filesystem.
+ * the beginning of the filesystem.
  */
 
 static u64 ufs_frag_map(struct inode *inode, sector_t frag, bool needs_lock)
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 7693d629340..3915ade6f9a 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -483,9 +483,9 @@ static int ufs_parse_options (char * options, unsigned * mount_options)
 }
 
 /*
- * Diffrent types of UFS hold fs_cstotal in different
- * places, and use diffrent data structure for it.
- * To make things simplier we just copy fs_cstotal to ufs_sb_private_info
+ * Different types of UFS hold fs_cstotal in different
+ * places, and use different data structure for it.
+ * To make things simpler we just copy fs_cstotal to ufs_sb_private_info
  */
 static void ufs_setup_cstotal(struct super_block *sb)
 {
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index 11014302c9c..5f821dbc057 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -479,7 +479,6 @@ int ufs_truncate(struct inode *inode, loff_t old_i_size)
 			break;
 		if (IS_SYNC(inode) && (inode->i_state & I_DIRTY))
 			ufs_sync_inode (inode);
-		blk_flush_plug(current);
 		yield();
 	}
 
diff --git a/fs/xattr.c b/fs/xattr.c
index a19acdb81cd..f1ef94974de 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -666,7 +666,7 @@ generic_setxattr(struct dentry *dentry, const char *name, const void *value, siz
 	handler = xattr_resolve_name(dentry->d_sb->s_xattr, &name);
 	if (!handler)
 		return -EOPNOTSUPP;
-	return handler->set(dentry, name, value, size, 0, handler->flags);
+	return handler->set(dentry, name, value, size, flags, handler->flags);
 }
 
 /*
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 52dbd14260b..79ce38be15a 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1295,7 +1295,7 @@ xfs_get_blocks_direct(
  * If the private argument is non-NULL __xfs_get_blocks signals us that we
  * need to issue a transaction to convert the range from unwritten to written
  * extents.  In case this is regular synchronous I/O we just call xfs_end_io
- * to do this and we are done.  But in case this was a successfull AIO
+ * to do this and we are done.  But in case this was a successful AIO
  * request this handler is called from interrupt context, from which we
  * can't start transactions.  In that case offload the I/O completion to
  * the workqueues we also use for buffered I/O completion.
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 596bb2c9de4..9ef9ed2cfe2 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -120,7 +120,7 @@ xfs_buf_lru_add(
  * The unlocked check is safe here because it only occurs when there are not
  * b_lru_ref counts left on the inode under the pag->pag_buf_lock. it is there
  * to optimise the shrinker removing the buffer from the LRU and calling
- * xfs_buf_free(). i.e. it removes an unneccessary round trip on the
+ * xfs_buf_free(). i.e. it removes an unnecessary round trip on the
  * bt_lru_lock.
  */
 STATIC void
@@ -293,7 +293,6 @@ xfs_buf_allocate_memory(
 	size_t			nbytes, offset;
 	gfp_t			gfp_mask = xb_to_gfp(flags);
 	unsigned short		page_count, i;
-	pgoff_t			first;
 	xfs_off_t		end;
 	int			error;
 
@@ -333,7 +332,6 @@ use_alloc_page:
 		return error;
 
 	offset = bp->b_offset;
-	first = bp->b_file_offset >> PAGE_SHIFT;
 	bp->b_flags |= _XBF_PAGES;
 
 	for (i = 0; i < bp->b_page_count; i++) {
@@ -380,7 +378,7 @@ out_free_pages:
 }
 
 /*
- *	Map buffer into kernel address-space if nessecary.
+ *	Map buffer into kernel address-space if necessary.
  */
 STATIC int
 _xfs_buf_map_pages(
@@ -657,8 +655,6 @@ xfs_buf_readahead(
 	xfs_off_t		ioff,
 	size_t			isize)
 {
-	struct backing_dev_info *bdi;
-
 	if (bdi_read_congested(target->bt_bdi))
 		return;
 
@@ -919,8 +915,6 @@ xfs_buf_lock(
 
 	if (atomic_read(&bp->b_pin_count) && (bp->b_flags & XBF_STALE))
 		xfs_log_force(bp->b_target->bt_mount, 0);
-	if (atomic_read(&bp->b_io_remaining))
-		blk_flush_plug(current);
 	down(&bp->b_sema);
 	XB_SET_OWNER(bp);
 
@@ -1309,8 +1303,6 @@ xfs_buf_iowait(
 {
 	trace_xfs_buf_iowait(bp, _RET_IP_);
 
-	if (atomic_read(&bp->b_io_remaining))
-		blk_flush_plug(current);
 	wait_for_completion(&bp->b_iowait);
 
 	trace_xfs_buf_iowait_done(bp, _RET_IP_);
@@ -1747,8 +1739,8 @@ xfsbufd(
 	do {
 		long	age = xfs_buf_age_centisecs * msecs_to_jiffies(10);
 		long	tout = xfs_buf_timer_centisecs * msecs_to_jiffies(10);
-		int	count = 0;
 		struct list_head tmp;
+		struct blk_plug plug;
 
 		if (unlikely(freezing(current))) {
 			set_bit(XBT_FORCE_SLEEP, &target->bt_flags);
@@ -1764,16 +1756,15 @@ xfsbufd(
 
 		xfs_buf_delwri_split(target, &tmp, age);
 		list_sort(NULL, &tmp, xfs_buf_cmp);
+
+		blk_start_plug(&plug);
 		while (!list_empty(&tmp)) {
 			struct xfs_buf *bp;
 			bp = list_first_entry(&tmp, struct xfs_buf, b_list);
 			list_del_init(&bp->b_list);
 			xfs_bdstrat_cb(bp);
-			count++;
 		}
-		if (count)
-			blk_flush_plug(current);
-
+		blk_finish_plug(&plug);
 	} while (!kthread_should_stop());
 
 	return 0;
@@ -1793,6 +1784,7 @@ xfs_flush_buftarg(
 	int		pincount = 0;
 	LIST_HEAD(tmp_list);
 	LIST_HEAD(wait_list);
+	struct blk_plug plug;
 
 	xfs_buf_runall_queues(xfsconvertd_workqueue);
 	xfs_buf_runall_queues(xfsdatad_workqueue);
@@ -1807,6 +1799,8 @@ xfs_flush_buftarg(
 	 * we do that after issuing all the IO.
 	 */
 	list_sort(NULL, &tmp_list, xfs_buf_cmp);
+
+	blk_start_plug(&plug);
 	while (!list_empty(&tmp_list)) {
 		bp = list_first_entry(&tmp_list, struct xfs_buf, b_list);
 		ASSERT(target == bp->b_target);
@@ -1817,10 +1811,10 @@ xfs_flush_buftarg(
 		}
 		xfs_bdstrat_cb(bp);
 	}
+	blk_finish_plug(&plug);
 
 	if (wait) {
-		/* Expedite and wait for IO to complete. */
-		blk_flush_plug(current);
+		/* Wait for IO to complete. */
 		while (!list_empty(&wait_list)) {
 			bp = list_first_entry(&wait_list, struct xfs_buf, b_list);
 
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 52aadfbed13..f4213ba1ff8 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -381,7 +381,7 @@ xfs_aio_write_isize_update(
 
 /*
  * If this was a direct or synchronous I/O that failed (such as ENOSPC) then
- * part of the I/O may have been written to disk before the error occured.  In
+ * part of the I/O may have been written to disk before the error occurred.  In
  * this case the on-disk file size may have been adjusted beyond the in-memory
  * file size and now needs to be truncated back.
  */
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 9ff7fc603d2..dd21784525a 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -70,7 +70,7 @@ xfs_synchronize_times(
 
 /*
  * If the linux inode is valid, mark it dirty.
- * Used when commiting a dirty inode into a transaction so that
+ * Used when committing a dirty inode into a transaction so that
  * the inode will get written back by the linux code
  */
 void
diff --git a/fs/xfs/linux-2.6/xfs_message.c b/fs/xfs/linux-2.6/xfs_message.c
index 508e06fd7d1..9f76cceb678 100644
--- a/fs/xfs/linux-2.6/xfs_message.c
+++ b/fs/xfs/linux-2.6/xfs_message.c
@@ -28,53 +28,49 @@
 /*
  * XFS logging functions
  */
-static int
+static void
 __xfs_printk(
 	const char		*level,
 	const struct xfs_mount	*mp,
 	struct va_format	*vaf)
 {
-	if (mp && mp->m_fsname)
-		return printk("%sXFS (%s): %pV\n", level, mp->m_fsname, vaf);
-	return printk("%sXFS: %pV\n", level, vaf);
+	if (mp && mp->m_fsname) {
+		printk("%sXFS (%s): %pV\n", level, mp->m_fsname, vaf);
+		return;
+	}
+	printk("%sXFS: %pV\n", level, vaf);
 }
 
-int xfs_printk(
+void xfs_printk(
 	const char		*level,
 	const struct xfs_mount	*mp,
 	const char		*fmt, ...)
 {
 	struct va_format	vaf;
 	va_list			args;
-	int			 r;
 
 	va_start(args, fmt);
 
 	vaf.fmt = fmt;
 	vaf.va = &args;
 
-	r = __xfs_printk(level, mp, &vaf);
+	__xfs_printk(level, mp, &vaf);
 	va_end(args);
-
-	return r;
 }
 
 #define define_xfs_printk_level(func, kern_level)		\
-int func(const struct xfs_mount *mp, const char *fmt, ...)	\
+void func(const struct xfs_mount *mp, const char *fmt, ...)	\
 {								\
 	struct va_format	vaf;				\
 	va_list			args;				\
-	int			r;				\
 								\
 	va_start(args, fmt);					\
 								\
 	vaf.fmt = fmt;						\
 	vaf.va = &args;						\
 								\
-	r = __xfs_printk(kern_level, mp, &vaf);			\
+	__xfs_printk(kern_level, mp, &vaf);			\
 	va_end(args);						\
-								\
-	return r;						\
 }								\
 
 define_xfs_printk_level(xfs_emerg, KERN_EMERG);
@@ -88,7 +84,7 @@ define_xfs_printk_level(xfs_info, KERN_INFO);
 define_xfs_printk_level(xfs_debug, KERN_DEBUG);
 #endif
 
-int
+void
 xfs_alert_tag(
 	const struct xfs_mount	*mp,
 	int			panic_tag,
@@ -97,7 +93,6 @@ xfs_alert_tag(
 	struct va_format	vaf;
 	va_list			args;
 	int			do_panic = 0;
-	int			r;
 
 	if (xfs_panic_mask && (xfs_panic_mask & panic_tag)) {
 		xfs_printk(KERN_ALERT, mp,
@@ -110,12 +105,10 @@ xfs_alert_tag(
 	vaf.fmt = fmt;
 	vaf.va = &args;
 
-	r = __xfs_printk(KERN_ALERT, mp, &vaf);
+	__xfs_printk(KERN_ALERT, mp, &vaf);
 	va_end(args);
 
 	BUG_ON(do_panic);
-
-	return r;
 }
 
 void
diff --git a/fs/xfs/linux-2.6/xfs_message.h b/fs/xfs/linux-2.6/xfs_message.h
index e77ffa16745..f1b3fc1b6c4 100644
--- a/fs/xfs/linux-2.6/xfs_message.h
+++ b/fs/xfs/linux-2.6/xfs_message.h
@@ -3,32 +3,34 @@
 
 struct xfs_mount;
 
-extern int xfs_printk(const char *level, const struct xfs_mount *mp,
+extern void xfs_printk(const char *level, const struct xfs_mount *mp,
                       const char *fmt, ...)
         __attribute__ ((format (printf, 3, 4)));
-extern int xfs_emerg(const struct xfs_mount *mp, const char *fmt, ...)
+extern void xfs_emerg(const struct xfs_mount *mp, const char *fmt, ...)
         __attribute__ ((format (printf, 2, 3)));
-extern int xfs_alert(const struct xfs_mount *mp, const char *fmt, ...)
+extern void xfs_alert(const struct xfs_mount *mp, const char *fmt, ...)
         __attribute__ ((format (printf, 2, 3)));
-extern int xfs_alert_tag(const struct xfs_mount *mp, int tag,
+extern void xfs_alert_tag(const struct xfs_mount *mp, int tag,
 			 const char *fmt, ...)
         __attribute__ ((format (printf, 3, 4)));
-extern int xfs_crit(const struct xfs_mount *mp, const char *fmt, ...)
+extern void xfs_crit(const struct xfs_mount *mp, const char *fmt, ...)
         __attribute__ ((format (printf, 2, 3)));
-extern int xfs_err(const struct xfs_mount *mp, const char *fmt, ...)
+extern void xfs_err(const struct xfs_mount *mp, const char *fmt, ...)
         __attribute__ ((format (printf, 2, 3)));
-extern int xfs_warn(const struct xfs_mount *mp, const char *fmt, ...)
+extern void xfs_warn(const struct xfs_mount *mp, const char *fmt, ...)
         __attribute__ ((format (printf, 2, 3)));
-extern int xfs_notice(const struct xfs_mount *mp, const char *fmt, ...)
+extern void xfs_notice(const struct xfs_mount *mp, const char *fmt, ...)
         __attribute__ ((format (printf, 2, 3)));
-extern int xfs_info(const struct xfs_mount *mp, const char *fmt, ...)
+extern void xfs_info(const struct xfs_mount *mp, const char *fmt, ...)
         __attribute__ ((format (printf, 2, 3)));
 
 #ifdef DEBUG
-extern int xfs_debug(const struct xfs_mount *mp, const char *fmt, ...)
+extern void xfs_debug(const struct xfs_mount *mp, const char *fmt, ...)
         __attribute__ ((format (printf, 2, 3)));
 #else
-#define xfs_debug(mp, fmt, ...)	(0)
+static inline void xfs_debug(const struct xfs_mount *mp, const char *fmt, ...)
+{
+}
 #endif
 
 extern void assfail(char *expr, char *f, int l);
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 1ba5c451da3..b38e58d0229 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -816,75 +816,6 @@ xfs_setup_devices(
 	return 0;
 }
 
-/*
- * XFS AIL push thread support
- */
-void
-xfsaild_wakeup(
-	struct xfs_ail		*ailp,
-	xfs_lsn_t		threshold_lsn)
-{
-	/* only ever move the target forwards */
-	if (XFS_LSN_CMP(threshold_lsn, ailp->xa_target) > 0) {
-		ailp->xa_target = threshold_lsn;
-		wake_up_process(ailp->xa_task);
-	}
-}
-
-STATIC int
-xfsaild(
-	void	*data)
-{
-	struct xfs_ail	*ailp = data;
-	xfs_lsn_t	last_pushed_lsn = 0;
-	long		tout = 0; /* milliseconds */
-
-	while (!kthread_should_stop()) {
-		/*
-		 * for short sleeps indicating congestion, don't allow us to
-		 * get woken early. Otherwise all we do is bang on the AIL lock
-		 * without making progress.
-		 */
-		if (tout && tout <= 20)
-			__set_current_state(TASK_KILLABLE);
-		else
-			__set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(tout ?
-				 msecs_to_jiffies(tout) : MAX_SCHEDULE_TIMEOUT);
-
-		/* swsusp */
-		try_to_freeze();
-
-		ASSERT(ailp->xa_mount->m_log);
-		if (XFS_FORCED_SHUTDOWN(ailp->xa_mount))
-			continue;
-
-		tout = xfsaild_push(ailp, &last_pushed_lsn);
-	}
-
-	return 0;
-}	/* xfsaild */
-
-int
-xfsaild_start(
-	struct xfs_ail	*ailp)
-{
-	ailp->xa_target = 0;
-	ailp->xa_task = kthread_run(xfsaild, ailp, "xfsaild/%s",
-				    ailp->xa_mount->m_fsname);
-	if (IS_ERR(ailp->xa_task))
-		return -PTR_ERR(ailp->xa_task);
-	return 0;
-}
-
-void
-xfsaild_stop(
-	struct xfs_ail	*ailp)
-{
-	kthread_stop(ailp->xa_task);
-}
-
-
 /* Catch misguided souls that try to use this interface on XFS */
 STATIC struct inode *
 xfs_fs_alloc_inode(
@@ -1191,22 +1122,12 @@ xfs_fs_sync_fs(
 		return -error;
 
 	if (laptop_mode) {
-		int	prev_sync_seq = mp->m_sync_seq;
-
 		/*
 		 * The disk must be active because we're syncing.
 		 * We schedule xfssyncd now (now that the disk is
 		 * active) instead of later (when it might not be).
 		 */
-		wake_up_process(mp->m_sync_task);
-		/*
-		 * We have to wait for the sync iteration to complete.
-		 * If we don't, the disk activity caused by the sync
-		 * will come after the sync is completed, and that
-		 * triggers another sync from laptop mode.
-		 */
-		wait_event(mp->m_wait_single_sync_task,
-				mp->m_sync_seq != prev_sync_seq);
+		flush_delayed_work_sync(&mp->m_sync_work);
 	}
 
 	return 0;
@@ -1490,9 +1411,6 @@ xfs_fs_fill_super(
 	spin_lock_init(&mp->m_sb_lock);
 	mutex_init(&mp->m_growlock);
 	atomic_set(&mp->m_active_trans, 0);
-	INIT_LIST_HEAD(&mp->m_sync_list);
-	spin_lock_init(&mp->m_sync_lock);
-	init_waitqueue_head(&mp->m_wait_single_sync_task);
 
 	mp->m_super = sb;
 	sb->s_fs_info = mp;
@@ -1799,6 +1717,38 @@ xfs_destroy_zones(void)
 }
 
 STATIC int __init
+xfs_init_workqueues(void)
+{
+	/*
+	 * max_active is set to 8 to give enough concurency to allow
+	 * multiple work operations on each CPU to run. This allows multiple
+	 * filesystems to be running sync work concurrently, and scales with
+	 * the number of CPUs in the system.
+	 */
+	xfs_syncd_wq = alloc_workqueue("xfssyncd", WQ_CPU_INTENSIVE, 8);
+	if (!xfs_syncd_wq)
+		goto out;
+
+	xfs_ail_wq = alloc_workqueue("xfsail", WQ_CPU_INTENSIVE, 8);
+	if (!xfs_ail_wq)
+		goto out_destroy_syncd;
+
+	return 0;
+
+out_destroy_syncd:
+	destroy_workqueue(xfs_syncd_wq);
+out:
+	return -ENOMEM;
+}
+
+STATIC void
+xfs_destroy_workqueues(void)
+{
+	destroy_workqueue(xfs_ail_wq);
+	destroy_workqueue(xfs_syncd_wq);
+}
+
+STATIC int __init
 init_xfs_fs(void)
 {
 	int			error;
@@ -1813,10 +1763,14 @@ init_xfs_fs(void)
 	if (error)
 		goto out;
 
-	error = xfs_mru_cache_init();
+	error = xfs_init_workqueues();
 	if (error)
 		goto out_destroy_zones;
 
+	error = xfs_mru_cache_init();
+	if (error)
+		goto out_destroy_wq;
+
 	error = xfs_filestream_init();
 	if (error)
 		goto out_mru_cache_uninit;
@@ -1833,6 +1787,10 @@ init_xfs_fs(void)
 	if (error)
 		goto out_cleanup_procfs;
 
+	error = xfs_init_workqueues();
+	if (error)
+		goto out_sysctl_unregister;
+
 	vfs_initquota();
 
 	error = register_filesystem(&xfs_fs_type);
@@ -1850,6 +1808,8 @@ init_xfs_fs(void)
 	xfs_filestream_uninit();
  out_mru_cache_uninit:
 	xfs_mru_cache_uninit();
+ out_destroy_wq:
+	xfs_destroy_workqueues();
  out_destroy_zones:
 	xfs_destroy_zones();
  out:
@@ -1866,6 +1826,7 @@ exit_xfs_fs(void)
 	xfs_buf_terminate();
 	xfs_filestream_uninit();
 	xfs_mru_cache_uninit();
+	xfs_destroy_workqueues();
 	xfs_destroy_zones();
 }
 
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 594cd822d84..3e898a48122 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -22,6 +22,7 @@
 #include "xfs_log.h"
 #include "xfs_inum.h"
 #include "xfs_trans.h"
+#include "xfs_trans_priv.h"
 #include "xfs_sb.h"
 #include "xfs_ag.h"
 #include "xfs_mount.h"
@@ -39,6 +40,8 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
+struct workqueue_struct	*xfs_syncd_wq;	/* sync workqueue */
+
 /*
  * The inode lookup is done in batches to keep the amount of lock traffic and
  * radix tree lookups to a minimum. The batch size is a trade off between
@@ -401,7 +404,7 @@ xfs_quiesce_fs(
 /*
  * Second stage of a quiesce. The data is already synced, now we have to take
  * care of the metadata. New transactions are already blocked, so we need to
- * wait for any remaining transactions to drain out before proceding.
+ * wait for any remaining transactions to drain out before proceeding.
  */
 void
 xfs_quiesce_attr(
@@ -431,62 +434,12 @@ xfs_quiesce_attr(
 	xfs_unmountfs_writesb(mp);
 }
 
-/*
- * Enqueue a work item to be picked up by the vfs xfssyncd thread.
- * Doing this has two advantages:
- * - It saves on stack space, which is tight in certain situations
- * - It can be used (with care) as a mechanism to avoid deadlocks.
- * Flushing while allocating in a full filesystem requires both.
- */
-STATIC void
-xfs_syncd_queue_work(
-	struct xfs_mount *mp,
-	void		*data,
-	void		(*syncer)(struct xfs_mount *, void *),
-	struct completion *completion)
+static void
+xfs_syncd_queue_sync(
+	struct xfs_mount        *mp)
 {
-	struct xfs_sync_work *work;
-
-	work = kmem_alloc(sizeof(struct xfs_sync_work), KM_SLEEP);
-	INIT_LIST_HEAD(&work->w_list);
-	work->w_syncer = syncer;
-	work->w_data = data;
-	work->w_mount = mp;
-	work->w_completion = completion;
-	spin_lock(&mp->m_sync_lock);
-	list_add_tail(&work->w_list, &mp->m_sync_list);
-	spin_unlock(&mp->m_sync_lock);
-	wake_up_process(mp->m_sync_task);
-}
-
-/*
- * Flush delayed allocate data, attempting to free up reserved space
- * from existing allocations.  At this point a new allocation attempt
- * has failed with ENOSPC and we are in the process of scratching our
- * heads, looking about for more room...
- */
-STATIC void
-xfs_flush_inodes_work(
-	struct xfs_mount *mp,
-	void		*arg)
-{
-	struct inode	*inode = arg;
-	xfs_sync_data(mp, SYNC_TRYLOCK);
-	xfs_sync_data(mp, SYNC_TRYLOCK | SYNC_WAIT);
-	iput(inode);
-}
-
-void
-xfs_flush_inodes(
-	xfs_inode_t	*ip)
-{
-	struct inode	*inode = VFS_I(ip);
-	DECLARE_COMPLETION_ONSTACK(completion);
-
-	igrab(inode);
-	xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work, &completion);
-	wait_for_completion(&completion);
-	xfs_log_force(ip->i_mount, XFS_LOG_SYNC);
+	queue_delayed_work(xfs_syncd_wq, &mp->m_sync_work,
+				msecs_to_jiffies(xfs_syncd_centisecs * 10));
 }
 
 /*
@@ -496,9 +449,10 @@ xfs_flush_inodes(
  */
 STATIC void
 xfs_sync_worker(
-	struct xfs_mount *mp,
-	void		*unused)
+	struct work_struct *work)
 {
+	struct xfs_mount *mp = container_of(to_delayed_work(work),
+					struct xfs_mount, m_sync_work);
 	int		error;
 
 	if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
@@ -508,73 +462,106 @@ xfs_sync_worker(
 			error = xfs_fs_log_dummy(mp);
 		else
 			xfs_log_force(mp, 0);
-		xfs_reclaim_inodes(mp, 0);
 		error = xfs_qm_sync(mp, SYNC_TRYLOCK);
+
+		/* start pushing all the metadata that is currently dirty */
+		xfs_ail_push_all(mp->m_ail);
 	}
-	mp->m_sync_seq++;
-	wake_up(&mp->m_wait_single_sync_task);
+
+	/* queue us up again */
+	xfs_syncd_queue_sync(mp);
 }
 
-STATIC int
-xfssyncd(
-	void			*arg)
+/*
+ * Queue a new inode reclaim pass if there are reclaimable inodes and there
+ * isn't a reclaim pass already in progress. By default it runs every 5s based
+ * on the xfs syncd work default of 30s. Perhaps this should have it's own
+ * tunable, but that can be done if this method proves to be ineffective or too
+ * aggressive.
+ */
+static void
+xfs_syncd_queue_reclaim(
+	struct xfs_mount        *mp)
 {
-	struct xfs_mount	*mp = arg;
-	long			timeleft;
-	xfs_sync_work_t		*work, *n;
-	LIST_HEAD		(tmp);
-
-	set_freezable();
-	timeleft = xfs_syncd_centisecs * msecs_to_jiffies(10);
-	for (;;) {
-		if (list_empty(&mp->m_sync_list))
-			timeleft = schedule_timeout_interruptible(timeleft);
-		/* swsusp */
-		try_to_freeze();
-		if (kthread_should_stop() && list_empty(&mp->m_sync_list))
-			break;
 
-		spin_lock(&mp->m_sync_lock);
-		/*
-		 * We can get woken by laptop mode, to do a sync -
-		 * that's the (only!) case where the list would be
-		 * empty with time remaining.
-		 */
-		if (!timeleft || list_empty(&mp->m_sync_list)) {
-			if (!timeleft)
-				timeleft = xfs_syncd_centisecs *
-							msecs_to_jiffies(10);
-			INIT_LIST_HEAD(&mp->m_sync_work.w_list);
-			list_add_tail(&mp->m_sync_work.w_list,
-					&mp->m_sync_list);
-		}
-		list_splice_init(&mp->m_sync_list, &tmp);
-		spin_unlock(&mp->m_sync_lock);
+	/*
+	 * We can have inodes enter reclaim after we've shut down the syncd
+	 * workqueue during unmount, so don't allow reclaim work to be queued
+	 * during unmount.
+	 */
+	if (!(mp->m_super->s_flags & MS_ACTIVE))
+		return;
 
-		list_for_each_entry_safe(work, n, &tmp, w_list) {
-			(*work->w_syncer)(mp, work->w_data);
-			list_del(&work->w_list);
-			if (work == &mp->m_sync_work)
-				continue;
-			if (work->w_completion)
-				complete(work->w_completion);
-			kmem_free(work);
-		}
+	rcu_read_lock();
+	if (radix_tree_tagged(&mp->m_perag_tree, XFS_ICI_RECLAIM_TAG)) {
+		queue_delayed_work(xfs_syncd_wq, &mp->m_reclaim_work,
+			msecs_to_jiffies(xfs_syncd_centisecs / 6 * 10));
 	}
+	rcu_read_unlock();
+}
 
-	return 0;
+/*
+ * This is a fast pass over the inode cache to try to get reclaim moving on as
+ * many inodes as possible in a short period of time. It kicks itself every few
+ * seconds, as well as being kicked by the inode cache shrinker when memory
+ * goes low. It scans as quickly as possible avoiding locked inodes or those
+ * already being flushed, and once done schedules a future pass.
+ */
+STATIC void
+xfs_reclaim_worker(
+	struct work_struct *work)
+{
+	struct xfs_mount *mp = container_of(to_delayed_work(work),
+					struct xfs_mount, m_reclaim_work);
+
+	xfs_reclaim_inodes(mp, SYNC_TRYLOCK);
+	xfs_syncd_queue_reclaim(mp);
+}
+
+/*
+ * Flush delayed allocate data, attempting to free up reserved space
+ * from existing allocations.  At this point a new allocation attempt
+ * has failed with ENOSPC and we are in the process of scratching our
+ * heads, looking about for more room.
+ *
+ * Queue a new data flush if there isn't one already in progress and
+ * wait for completion of the flush. This means that we only ever have one
+ * inode flush in progress no matter how many ENOSPC events are occurring and
+ * so will prevent the system from bogging down due to every concurrent
+ * ENOSPC event scanning all the active inodes in the system for writeback.
+ */
+void
+xfs_flush_inodes(
+	struct xfs_inode	*ip)
+{
+	struct xfs_mount	*mp = ip->i_mount;
+
+	queue_work(xfs_syncd_wq, &mp->m_flush_work);
+	flush_work_sync(&mp->m_flush_work);
+}
+
+STATIC void
+xfs_flush_worker(
+	struct work_struct *work)
+{
+	struct xfs_mount *mp = container_of(work,
+					struct xfs_mount, m_flush_work);
+
+	xfs_sync_data(mp, SYNC_TRYLOCK);
+	xfs_sync_data(mp, SYNC_TRYLOCK | SYNC_WAIT);
 }
 
 int
 xfs_syncd_init(
 	struct xfs_mount	*mp)
 {
-	mp->m_sync_work.w_syncer = xfs_sync_worker;
-	mp->m_sync_work.w_mount = mp;
-	mp->m_sync_work.w_completion = NULL;
-	mp->m_sync_task = kthread_run(xfssyncd, mp, "xfssyncd/%s", mp->m_fsname);
-	if (IS_ERR(mp->m_sync_task))
-		return -PTR_ERR(mp->m_sync_task);
+	INIT_WORK(&mp->m_flush_work, xfs_flush_worker);
+	INIT_DELAYED_WORK(&mp->m_sync_work, xfs_sync_worker);
+	INIT_DELAYED_WORK(&mp->m_reclaim_work, xfs_reclaim_worker);
+
+	xfs_syncd_queue_sync(mp);
+	xfs_syncd_queue_reclaim(mp);
+
 	return 0;
 }
 
@@ -582,7 +569,9 @@ void
 xfs_syncd_stop(
 	struct xfs_mount	*mp)
 {
-	kthread_stop(mp->m_sync_task);
+	cancel_delayed_work_sync(&mp->m_sync_work);
+	cancel_delayed_work_sync(&mp->m_reclaim_work);
+	cancel_work_sync(&mp->m_flush_work);
 }
 
 void
@@ -601,6 +590,10 @@ __xfs_inode_set_reclaim_tag(
 				XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
 				XFS_ICI_RECLAIM_TAG);
 		spin_unlock(&ip->i_mount->m_perag_lock);
+
+		/* schedule periodic background inode reclaim */
+		xfs_syncd_queue_reclaim(ip->i_mount);
+
 		trace_xfs_perag_set_reclaim(ip->i_mount, pag->pag_agno,
 							-1, _RET_IP_);
 	}
@@ -933,6 +926,7 @@ restart:
 					XFS_LOOKUP_BATCH,
 					XFS_ICI_RECLAIM_TAG);
 			if (!nr_found) {
+				done = 1;
 				rcu_read_unlock();
 				break;
 			}
@@ -1017,7 +1011,13 @@ xfs_reclaim_inodes(
 }
 
 /*
- * Shrinker infrastructure.
+ * Inode cache shrinker.
+ *
+ * When called we make sure that there is a background (fast) inode reclaim in
+ * progress, while we will throttle the speed of reclaim via doiing synchronous
+ * reclaim of inodes. That means if we come across dirty inodes, we wait for
+ * them to be cleaned, which we hope will not be very long due to the
+ * background walker having already kicked the IO off on those dirty inodes.
  */
 static int
 xfs_reclaim_inode_shrink(
@@ -1032,10 +1032,15 @@ xfs_reclaim_inode_shrink(
 
 	mp = container_of(shrink, struct xfs_mount, m_inode_shrink);
 	if (nr_to_scan) {
+		/* kick background reclaimer and push the AIL */
+		xfs_syncd_queue_reclaim(mp);
+		xfs_ail_push_all(mp->m_ail);
+
 		if (!(gfp_mask & __GFP_FS))
 			return -1;
 
-		xfs_reclaim_inodes_ag(mp, SYNC_TRYLOCK, &nr_to_scan);
+		xfs_reclaim_inodes_ag(mp, SYNC_TRYLOCK | SYNC_WAIT,
+					&nr_to_scan);
 		/* terminate if we don't exhaust the scan */
 		if (nr_to_scan > 0)
 			return -1;
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 32ba6628290..e3a6ad27415 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -32,6 +32,8 @@ typedef struct xfs_sync_work {
 #define SYNC_WAIT		0x0001	/* wait for i/o to complete */
 #define SYNC_TRYLOCK		0x0002  /* only try to lock inodes */
 
+extern struct workqueue_struct	*xfs_syncd_wq;	/* sync workqueue */
+
 int xfs_syncd_init(struct xfs_mount *mp);
 void xfs_syncd_stop(struct xfs_mount *mp);
 
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 7e241647850..6fa21460381 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -600,7 +600,7 @@ xfs_qm_dqread(
 
 	/*
 	 * Reservation counters are defined as reservation plus current usage
-	 * to avoid having to add everytime.
+	 * to avoid having to add every time.
 	 */
 	dqp->q_res_bcount = be64_to_cpu(ddqp->d_bcount);
 	dqp->q_res_icount = be64_to_cpu(ddqp->d_icount);
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 254ee062bd7..69228aa8605 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -461,12 +461,10 @@ xfs_qm_dqflush_all(
 	struct xfs_quotainfo	*q = mp->m_quotainfo;
 	int			recl;
 	struct xfs_dquot	*dqp;
-	int			niters;
 	int			error;
 
 	if (!q)
 		return 0;
-	niters = 0;
 again:
 	mutex_lock(&q->qi_dqlist_lock);
 	list_for_each_entry(dqp, &q->qi_dqlist, q_mplist) {
@@ -1314,14 +1312,9 @@ xfs_qm_dqiter_bufs(
 {
 	xfs_buf_t	*bp;
 	int		error;
-	int		notcommitted;
-	int		incr;
 	int		type;
 
 	ASSERT(blkcnt > 0);
-	notcommitted = 0;
-	incr = (blkcnt > XFS_QM_MAX_DQCLUSTER_LOGSZ) ?
-		XFS_QM_MAX_DQCLUSTER_LOGSZ : blkcnt;
 	type = flags & XFS_QMOPT_UQUOTA ? XFS_DQ_USER :
 		(flags & XFS_QMOPT_PQUOTA ? XFS_DQ_PROJ : XFS_DQ_GROUP);
 	error = 0;
diff --git a/fs/xfs/quota/xfs_qm.h b/fs/xfs/quota/xfs_qm.h
index c9446f1c726..567b29b9f1b 100644
--- a/fs/xfs/quota/xfs_qm.h
+++ b/fs/xfs/quota/xfs_qm.h
@@ -65,11 +65,6 @@ extern kmem_zone_t	*qm_dqtrxzone;
  * block in the dquot/xqm code.
  */
 #define XFS_DQUOT_CLUSTER_SIZE_FSB	(xfs_filblks_t)1
-/*
- * When doing a quotacheck, we log dquot clusters of this many FSBs at most
- * in a single transaction. We don't want to ask for too huge a log reservation.
- */
-#define XFS_QM_MAX_DQCLUSTER_LOGSZ	3
 
 typedef xfs_dqhash_t	xfs_dqlist_t;
 
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index 774d7ec6df8..a0a829addca 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -134,7 +134,7 @@ xfs_qm_newmount(
 		 */
 		if (quotaondisk && !XFS_QM_NEED_QUOTACHECK(mp)) {
 			/*
-			 * If an error occured, qm_mount_quotas code
+			 * If an error occurred, qm_mount_quotas code
 			 * has already disabled quotas. So, just finish
 			 * mounting, and get on with the boring life
 			 * without disk quotas.
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index c82f06778a2..2dadb15d5ca 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -172,7 +172,7 @@ xfs_qm_scall_quotaoff(
 	/*
 	 * Next we make the changes in the quota flag in the mount struct.
 	 * This isn't protected by a particular lock directly, because we
-	 * don't want to take a mrlock everytime we depend on quotas being on.
+	 * don't want to take a mrlock every time we depend on quotas being on.
 	 */
 	mp->m_qflags &= ~(flags);
 
@@ -313,14 +313,12 @@ xfs_qm_scall_quotaon(
 {
 	int		error;
 	uint		qf;
-	uint		accflags;
 	__int64_t	sbflags;
 
 	flags &= (XFS_ALL_QUOTA_ACCT | XFS_ALL_QUOTA_ENFD);
 	/*
 	 * Switching on quota accounting must be done at mount time.
 	 */
-	accflags = flags & XFS_ALL_QUOTA_ACCT;
 	flags &= ~(XFS_ALL_QUOTA_ACCT);
 
 	sbflags = 0;
@@ -354,7 +352,7 @@ xfs_qm_scall_quotaon(
 		return XFS_ERROR(EINVAL);
 	}
 	/*
-	 * If everything's upto-date incore, then don't waste time.
+	 * If everything's up to-date incore, then don't waste time.
 	 */
 	if ((mp->m_qflags & flags) == flags)
 		return XFS_ERROR(EEXIST);
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index 4bc3c649aee..27d64d752ea 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -2395,17 +2395,33 @@ xfs_free_extent(
 	memset(&args, 0, sizeof(xfs_alloc_arg_t));
 	args.tp = tp;
 	args.mp = tp->t_mountp;
+
+	/*
+	 * validate that the block number is legal - the enables us to detect
+	 * and handle a silent filesystem corruption rather than crashing.
+	 */
 	args.agno = XFS_FSB_TO_AGNO(args.mp, bno);
-	ASSERT(args.agno < args.mp->m_sb.sb_agcount);
+	if (args.agno >= args.mp->m_sb.sb_agcount)
+		return EFSCORRUPTED;
+
 	args.agbno = XFS_FSB_TO_AGBNO(args.mp, bno);
+	if (args.agbno >= args.mp->m_sb.sb_agblocks)
+		return EFSCORRUPTED;
+
 	args.pag = xfs_perag_get(args.mp, args.agno);
-	if ((error = xfs_alloc_fix_freelist(&args, XFS_ALLOC_FLAG_FREEING)))
+	ASSERT(args.pag);
+
+	error = xfs_alloc_fix_freelist(&args, XFS_ALLOC_FLAG_FREEING);
+	if (error)
 		goto error0;
-#ifdef DEBUG
-	ASSERT(args.agbp != NULL);
-	ASSERT((args.agbno + len) <=
-		be32_to_cpu(XFS_BUF_TO_AGF(args.agbp)->agf_length));
-#endif
+
+	/* validate the extent size is legal now we have the agf locked */
+	if (args.agbno + len >
+			be32_to_cpu(XFS_BUF_TO_AGF(args.agbp)->agf_length)) {
+		error = EFSCORRUPTED;
+		goto error0;
+	}
+
 	error = xfs_free_ag_extent(tp, args.agbp, args.agno, args.agbno, len, 0);
 error0:
 	xfs_perag_put(args.pag);
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index e5413d96f1a..7b7e005e3dc 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -992,7 +992,7 @@ xfs_buf_iodone_callbacks(
 	lasttarg = XFS_BUF_TARGET(bp);
 
 	/*
-	 * If the write was asynchronous then noone will be looking for the
+	 * If the write was asynchronous then no one will be looking for the
 	 * error.  Clear the error state and write the buffer out again.
 	 *
 	 * During sync or umount we'll write all pending buffers again
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 742c8330994..a37480a6e02 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2789,7 +2789,7 @@ xfs_iflush(
 
 	/*
 	 * We can't flush the inode until it is unpinned, so wait for it if we
-	 * are allowed to block.  We know noone new can pin it, because we are
+	 * are allowed to block.  We know no one new can pin it, because we are
 	 * holding the inode lock shared and you need to hold it exclusively to
 	 * pin the inode.
 	 *
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index f753200cef8..ff4e2a30227 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -111,7 +111,7 @@ struct xfs_imap {
  * Generally, we do not want to hold the i_rlock while holding the
  * i_ilock. Hierarchy is i_iolock followed by i_rlock.
  *
- * xfs_iptr_t contains all the inode fields upto and including the
+ * xfs_iptr_t contains all the inode fields up to and including the
  * i_mnext and i_mprev fields, it is used as a marker in the inode
  * chain off the mount structure by xfs_sync calls.
  */
@@ -336,7 +336,7 @@ xfs_iflags_test_and_clear(xfs_inode_t *ip, unsigned short flags)
 
 /*
  * Project quota id helpers (previously projid was 16bit only
- * and using two 16bit values to hold new 32bit projid was choosen
+ * and using two 16bit values to hold new 32bit projid was chosen
  * to retain compatibility with "old" filesystems).
  */
 static inline prid_t
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 46cc40131d4..576fdfe81d6 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -198,6 +198,41 @@ xfs_inode_item_size(
 }
 
 /*
+ * xfs_inode_item_format_extents - convert in-core extents to on-disk form
+ *
+ * For either the data or attr fork in extent format, we need to endian convert
+ * the in-core extent as we place them into the on-disk inode. In this case, we
+ * need to do this conversion before we write the extents into the log. Because
+ * we don't have the disk inode to write into here, we allocate a buffer and
+ * format the extents into it via xfs_iextents_copy(). We free the buffer in
+ * the unlock routine after the copy for the log has been made.
+ *
+ * In the case of the data fork, the in-core and on-disk fork sizes can be
+ * different due to delayed allocation extents. We only log on-disk extents
+ * here, so always use the physical fork size to determine the size of the
+ * buffer we need to allocate.
+ */
+STATIC void
+xfs_inode_item_format_extents(
+	struct xfs_inode	*ip,
+	struct xfs_log_iovec	*vecp,
+	int			whichfork,
+	int			type)
+{
+	xfs_bmbt_rec_t		*ext_buffer;
+
+	ext_buffer = kmem_alloc(XFS_IFORK_SIZE(ip, whichfork), KM_SLEEP);
+	if (whichfork == XFS_DATA_FORK)
+		ip->i_itemp->ili_extents_buf = ext_buffer;
+	else
+		ip->i_itemp->ili_aextents_buf = ext_buffer;
+
+	vecp->i_addr = ext_buffer;
+	vecp->i_len = xfs_iextents_copy(ip, ext_buffer, whichfork);
+	vecp->i_type = type;
+}
+
+/*
  * This is called to fill in the vector of log iovecs for the
  * given inode log item.  It fills the first item with an inode
  * log format structure, the second with the on-disk inode structure,
@@ -213,7 +248,6 @@ xfs_inode_item_format(
 	struct xfs_inode	*ip = iip->ili_inode;
 	uint			nvecs;
 	size_t			data_bytes;
-	xfs_bmbt_rec_t		*ext_buffer;
 	xfs_mount_t		*mp;
 
 	vecp->i_addr = &iip->ili_format;
@@ -320,22 +354,8 @@ xfs_inode_item_format(
 			} else
 #endif
 			{
-				/*
-				 * There are delayed allocation extents
-				 * in the inode, or we need to convert
-				 * the extents to on disk format.
-				 * Use xfs_iextents_copy()
-				 * to copy only the real extents into
-				 * a separate buffer.  We'll free the
-				 * buffer in the unlock routine.
-				 */
-				ext_buffer = kmem_alloc(ip->i_df.if_bytes,
-					KM_SLEEP);
-				iip->ili_extents_buf = ext_buffer;
-				vecp->i_addr = ext_buffer;
-				vecp->i_len = xfs_iextents_copy(ip, ext_buffer,
-						XFS_DATA_FORK);
-				vecp->i_type = XLOG_REG_TYPE_IEXT;
+				xfs_inode_item_format_extents(ip, vecp,
+					XFS_DATA_FORK, XLOG_REG_TYPE_IEXT);
 			}
 			ASSERT(vecp->i_len <= ip->i_df.if_bytes);
 			iip->ili_format.ilf_dsize = vecp->i_len;
@@ -445,19 +465,12 @@ xfs_inode_item_format(
 			 */
 			vecp->i_addr = ip->i_afp->if_u1.if_extents;
 			vecp->i_len = ip->i_afp->if_bytes;
+			vecp->i_type = XLOG_REG_TYPE_IATTR_EXT;
 #else
 			ASSERT(iip->ili_aextents_buf == NULL);
-			/*
-			 * Need to endian flip before logging
-			 */
-			ext_buffer = kmem_alloc(ip->i_afp->if_bytes,
-				KM_SLEEP);
-			iip->ili_aextents_buf = ext_buffer;
-			vecp->i_addr = ext_buffer;
-			vecp->i_len = xfs_iextents_copy(ip, ext_buffer,
-					XFS_ATTR_FORK);
+			xfs_inode_item_format_extents(ip, vecp,
+					XFS_ATTR_FORK, XLOG_REG_TYPE_IATTR_EXT);
 #endif
-			vecp->i_type = XLOG_REG_TYPE_IATTR_EXT;
 			iip->ili_format.ilf_asize = vecp->i_len;
 			vecp++;
 			nvecs++;
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index dc1882adaf5..751e94fe1f7 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -204,7 +204,6 @@ xfs_bulkstat(
 	xfs_agi_t		*agi;	/* agi header data */
 	xfs_agino_t		agino;	/* inode # in allocation group */
 	xfs_agnumber_t		agno;	/* allocation group number */
-	xfs_daddr_t		bno;	/* inode cluster start daddr */
 	int			chunkidx; /* current index into inode chunk */
 	int			clustidx; /* current index into inode cluster */
 	xfs_btree_cur_t		*cur;	/* btree cursor for ialloc btree */
@@ -463,7 +462,6 @@ xfs_bulkstat(
 						 mp->m_sb.sb_inopblog);
 				}
 				ino = XFS_AGINO_TO_INO(mp, agno, agino);
-				bno = XFS_AGB_TO_DADDR(mp, agno, agbno);
 				/*
 				 * Skip if this inode is free.
 				 */
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 25efa9b8a60..b612ce4520a 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -761,7 +761,7 @@ xfs_log_need_covered(xfs_mount_t *mp)
 		break;
 	case XLOG_STATE_COVER_NEED:
 	case XLOG_STATE_COVER_NEED2:
-		if (!xfs_trans_ail_tail(log->l_ailp) &&
+		if (!xfs_ail_min_lsn(log->l_ailp) &&
 		    xlog_iclogs_empty(log)) {
 			if (log->l_covered_state == XLOG_STATE_COVER_NEED)
 				log->l_covered_state = XLOG_STATE_COVER_DONE;
@@ -801,7 +801,7 @@ xlog_assign_tail_lsn(
 	xfs_lsn_t		tail_lsn;
 	struct log		*log = mp->m_log;
 
-	tail_lsn = xfs_trans_ail_tail(mp->m_ail);
+	tail_lsn = xfs_ail_min_lsn(mp->m_ail);
 	if (!tail_lsn)
 		tail_lsn = atomic64_read(&log->l_last_sync_lsn);
 
@@ -1239,7 +1239,7 @@ xlog_grant_push_ail(
 	 * the filesystem is shutting down.
 	 */
 	if (!XLOG_FORCED_SHUTDOWN(log))
-		xfs_trans_ail_push(log->l_ailp, threshold_lsn);
+		xfs_ail_push(log->l_ailp, threshold_lsn);
 }
 
 /*
@@ -3407,6 +3407,17 @@ xlog_verify_dest_ptr(
 		xfs_emerg(log->l_mp, "%s: invalid ptr", __func__);
 }
 
+/*
+ * Check to make sure the grant write head didn't just over lap the tail.  If
+ * the cycles are the same, we can't be overlapping.  Otherwise, make sure that
+ * the cycles differ by exactly one and check the byte count.
+ *
+ * This check is run unlocked, so can give false positives. Rather than assert
+ * on failures, use a warn-once flag and a panic tag to allow the admin to
+ * determine if they want to panic the machine when such an error occurs. For
+ * debug kernels this will have the same effect as using an assert but, unlinke
+ * an assert, it can be turned off at runtime.
+ */
 STATIC void
 xlog_verify_grant_tail(
 	struct log	*log)
@@ -3414,17 +3425,22 @@ xlog_verify_grant_tail(
 	int		tail_cycle, tail_blocks;
 	int		cycle, space;
 
-	/*
-	 * Check to make sure the grant write head didn't just over lap the
-	 * tail.  If the cycles are the same, we can't be overlapping.
-	 * Otherwise, make sure that the cycles differ by exactly one and
-	 * check the byte count.
-	 */
 	xlog_crack_grant_head(&log->l_grant_write_head, &cycle, &space);
 	xlog_crack_atomic_lsn(&log->l_tail_lsn, &tail_cycle, &tail_blocks);
 	if (tail_cycle != cycle) {
-		ASSERT(cycle - 1 == tail_cycle);
-		ASSERT(space <= BBTOB(tail_blocks));
+		if (cycle - 1 != tail_cycle &&
+		    !(log->l_flags & XLOG_TAIL_WARN)) {
+			xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
+				"%s: cycle - 1 != tail_cycle", __func__);
+			log->l_flags |= XLOG_TAIL_WARN;
+		}
+
+		if (space > BBTOB(tail_blocks) &&
+		    !(log->l_flags & XLOG_TAIL_WARN)) {
+			xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
+				"%s: space > BBTOB(tail_blocks)", __func__);
+			log->l_flags |= XLOG_TAIL_WARN;
+		}
 	}
 }
 
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index 15dbf1f9c2b..5864850e9e3 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -144,6 +144,7 @@ static inline uint xlog_get_client_id(__be32 i)
 #define	XLOG_RECOVERY_NEEDED	0x4	/* log was recovered */
 #define XLOG_IO_ERROR		0x8	/* log hit an I/O error, and being
 					   shutdown */
+#define XLOG_TAIL_WARN		0x10	/* log tail verify warning issued */
 
 #ifdef __KERNEL__
 /*
@@ -570,7 +571,7 @@ int	xlog_write(struct log *log, struct xfs_log_vec *log_vector,
  * When we crack an atomic LSN, we sample it first so that the value will not
  * change while we are cracking it into the component values. This means we
  * will always get consistent component values to work from. This should always
- * be used to smaple and crack LSNs taht are stored and updated in atomic
+ * be used to sample and crack LSNs that are stored and updated in atomic
  * variables.
  */
 static inline void
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 0c4a5618e7a..5cc464a17c9 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -101,7 +101,7 @@ xlog_get_bp(
 	/*
 	 * We do log I/O in units of log sectors (a power-of-2
 	 * multiple of the basic block size), so we round up the
-	 * requested size to acommodate the basic blocks required
+	 * requested size to accommodate the basic blocks required
 	 * for complete log sectors.
 	 *
 	 * In addition, the buffer may be used for a non-sector-
@@ -112,7 +112,7 @@ xlog_get_bp(
 	 * an issue.  Nor will this be a problem if the log I/O is
 	 * done in basic blocks (sector size 1).  But otherwise we
 	 * extend the buffer by one extra log sector to ensure
-	 * there's space to accomodate this possiblility.
+	 * there's space to accommodate this possibility.
 	 */
 	if (nbblks > 1 && log->l_sectBBsize > 1)
 		nbblks += log->l_sectBBsize;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index a62e8971539..19af0ab0d0c 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -203,12 +203,9 @@ typedef struct xfs_mount {
 	struct mutex		m_icsb_mutex;	/* balancer sync lock */
 #endif
 	struct xfs_mru_cache	*m_filestream;  /* per-mount filestream data */
-	struct task_struct	*m_sync_task;	/* generalised sync thread */
-	xfs_sync_work_t		m_sync_work;	/* work item for VFS_SYNC */
-	struct list_head	m_sync_list;	/* sync thread work item list */
-	spinlock_t		m_sync_lock;	/* work item list lock */
-	int			m_sync_seq;	/* sync thread generation no. */
-	wait_queue_head_t	m_wait_single_sync_task;
+	struct delayed_work	m_sync_work;	/* background sync work */
+	struct delayed_work	m_reclaim_work;	/* background inode reclaim */
+	struct work_struct	m_flush_work;	/* background inode flush */
 	__int64_t		m_update_flags;	/* sb flags we need to update
 						   on the next remount,rw */
 	struct shrinker		m_inode_shrink;	/* inode reclaim shrinker */
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index 12aff9584e2..5fc2380092c 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -28,74 +28,138 @@
 #include "xfs_trans_priv.h"
 #include "xfs_error.h"
 
-STATIC void xfs_ail_splice(struct xfs_ail *, struct list_head *, xfs_lsn_t);
-STATIC void xfs_ail_delete(struct xfs_ail *, xfs_log_item_t *);
-STATIC xfs_log_item_t * xfs_ail_min(struct xfs_ail *);
-STATIC xfs_log_item_t * xfs_ail_next(struct xfs_ail *, xfs_log_item_t *);
+struct workqueue_struct	*xfs_ail_wq;	/* AIL workqueue */
 
 #ifdef DEBUG
-STATIC void xfs_ail_check(struct xfs_ail *, xfs_log_item_t *);
-#else
+/*
+ * Check that the list is sorted as it should be.
+ */
+STATIC void
+xfs_ail_check(
+	struct xfs_ail	*ailp,
+	xfs_log_item_t	*lip)
+{
+	xfs_log_item_t	*prev_lip;
+
+	if (list_empty(&ailp->xa_ail))
+		return;
+
+	/*
+	 * Check the next and previous entries are valid.
+	 */
+	ASSERT((lip->li_flags & XFS_LI_IN_AIL) != 0);
+	prev_lip = list_entry(lip->li_ail.prev, xfs_log_item_t, li_ail);
+	if (&prev_lip->li_ail != &ailp->xa_ail)
+		ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0);
+
+	prev_lip = list_entry(lip->li_ail.next, xfs_log_item_t, li_ail);
+	if (&prev_lip->li_ail != &ailp->xa_ail)
+		ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) >= 0);
+
+
+#ifdef XFS_TRANS_DEBUG
+	/*
+	 * Walk the list checking lsn ordering, and that every entry has the
+	 * XFS_LI_IN_AIL flag set. This is really expensive, so only do it
+	 * when specifically debugging the transaction subsystem.
+	 */
+	prev_lip = list_entry(&ailp->xa_ail, xfs_log_item_t, li_ail);
+	list_for_each_entry(lip, &ailp->xa_ail, li_ail) {
+		if (&prev_lip->li_ail != &ailp->xa_ail)
+			ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0);
+		ASSERT((lip->li_flags & XFS_LI_IN_AIL) != 0);
+		prev_lip = lip;
+	}
+#endif /* XFS_TRANS_DEBUG */
+}
+#else /* !DEBUG */
 #define	xfs_ail_check(a,l)
 #endif /* DEBUG */
 
+/*
+ * Return a pointer to the first item in the AIL.  If the AIL is empty, then
+ * return NULL.
+ */
+static xfs_log_item_t *
+xfs_ail_min(
+	struct xfs_ail  *ailp)
+{
+	if (list_empty(&ailp->xa_ail))
+		return NULL;
+
+	return list_first_entry(&ailp->xa_ail, xfs_log_item_t, li_ail);
+}
+
+ /*
+ * Return a pointer to the last item in the AIL.  If the AIL is empty, then
+ * return NULL.
+ */
+static xfs_log_item_t *
+xfs_ail_max(
+	struct xfs_ail  *ailp)
+{
+	if (list_empty(&ailp->xa_ail))
+		return NULL;
+
+	return list_entry(ailp->xa_ail.prev, xfs_log_item_t, li_ail);
+}
+
+/*
+ * Return a pointer to the item which follows the given item in the AIL.  If
+ * the given item is the last item in the list, then return NULL.
+ */
+static xfs_log_item_t *
+xfs_ail_next(
+	struct xfs_ail  *ailp,
+	xfs_log_item_t  *lip)
+{
+	if (lip->li_ail.next == &ailp->xa_ail)
+		return NULL;
+
+	return list_first_entry(&lip->li_ail, xfs_log_item_t, li_ail);
+}
 
 /*
- * This is called by the log manager code to determine the LSN
- * of the tail of the log.  This is exactly the LSN of the first
- * item in the AIL.  If the AIL is empty, then this function
- * returns 0.
+ * This is called by the log manager code to determine the LSN of the tail of
+ * the log.  This is exactly the LSN of the first item in the AIL.  If the AIL
+ * is empty, then this function returns 0.
  *
- * We need the AIL lock in order to get a coherent read of the
- * lsn of the last item in the AIL.
+ * We need the AIL lock in order to get a coherent read of the lsn of the last
+ * item in the AIL.
  */
 xfs_lsn_t
-xfs_trans_ail_tail(
+xfs_ail_min_lsn(
 	struct xfs_ail	*ailp)
 {
-	xfs_lsn_t	lsn;
+	xfs_lsn_t	lsn = 0;
 	xfs_log_item_t	*lip;
 
 	spin_lock(&ailp->xa_lock);
 	lip = xfs_ail_min(ailp);
-	if (lip == NULL) {
-		lsn = (xfs_lsn_t)0;
-	} else {
+	if (lip)
 		lsn = lip->li_lsn;
-	}
 	spin_unlock(&ailp->xa_lock);
 
 	return lsn;
 }
 
 /*
- * xfs_trans_push_ail
- *
- * This routine is called to move the tail of the AIL forward.  It does this by
- * trying to flush items in the AIL whose lsns are below the given
- * threshold_lsn.
- *
- * the push is run asynchronously in a separate thread, so we return the tail
- * of the log right now instead of the tail after the push. This means we will
- * either continue right away, or we will sleep waiting on the async thread to
- * do its work.
- *
- * We do this unlocked - we only need to know whether there is anything in the
- * AIL at the time we are called. We don't need to access the contents of
- * any of the objects, so the lock is not needed.
+ * Return the maximum lsn held in the AIL, or zero if the AIL is empty.
  */
-void
-xfs_trans_ail_push(
-	struct xfs_ail	*ailp,
-	xfs_lsn_t	threshold_lsn)
+static xfs_lsn_t
+xfs_ail_max_lsn(
+	struct xfs_ail  *ailp)
 {
-	xfs_log_item_t	*lip;
+	xfs_lsn_t       lsn = 0;
+	xfs_log_item_t  *lip;
 
-	lip = xfs_ail_min(ailp);
-	if (lip && !XFS_FORCED_SHUTDOWN(ailp->xa_mount)) {
-		if (XFS_LSN_CMP(threshold_lsn, ailp->xa_target) > 0)
-			xfsaild_wakeup(ailp, threshold_lsn);
-	}
+	spin_lock(&ailp->xa_lock);
+	lip = xfs_ail_max(ailp);
+	if (lip)
+		lsn = lip->li_lsn;
+	spin_unlock(&ailp->xa_lock);
+
+	return lsn;
 }
 
 /*
@@ -236,35 +300,78 @@ out:
 }
 
 /*
- * xfsaild_push does the work of pushing on the AIL.  Returning a timeout of
- * zero indicates that the caller should sleep until woken.
+ * splice the log item list into the AIL at the given LSN.
  */
-long
-xfsaild_push(
-	struct xfs_ail	*ailp,
-	xfs_lsn_t	*last_lsn)
+static void
+xfs_ail_splice(
+	struct xfs_ail  *ailp,
+	struct list_head *list,
+	xfs_lsn_t       lsn)
 {
-	long		tout = 0;
-	xfs_lsn_t	last_pushed_lsn = *last_lsn;
-	xfs_lsn_t	target =  ailp->xa_target;
-	xfs_lsn_t	lsn;
-	xfs_log_item_t	*lip;
-	int		flush_log, count, stuck;
-	xfs_mount_t	*mp = ailp->xa_mount;
+	xfs_log_item_t  *next_lip;
+
+	/* If the list is empty, just insert the item.  */
+	if (list_empty(&ailp->xa_ail)) {
+		list_splice(list, &ailp->xa_ail);
+		return;
+	}
+
+	list_for_each_entry_reverse(next_lip, &ailp->xa_ail, li_ail) {
+		if (XFS_LSN_CMP(next_lip->li_lsn, lsn) <= 0)
+			break;
+	}
+
+	ASSERT(&next_lip->li_ail == &ailp->xa_ail ||
+	       XFS_LSN_CMP(next_lip->li_lsn, lsn) <= 0);
+
+	list_splice_init(list, &next_lip->li_ail);
+}
+
+/*
+ * Delete the given item from the AIL.  Return a pointer to the item.
+ */
+static void
+xfs_ail_delete(
+	struct xfs_ail  *ailp,
+	xfs_log_item_t  *lip)
+{
+	xfs_ail_check(ailp, lip);
+	list_del(&lip->li_ail);
+	xfs_trans_ail_cursor_clear(ailp, lip);
+}
+
+/*
+ * xfs_ail_worker does the work of pushing on the AIL. It will requeue itself
+ * to run at a later time if there is more work to do to complete the push.
+ */
+STATIC void
+xfs_ail_worker(
+	struct work_struct	*work)
+{
+	struct xfs_ail		*ailp = container_of(to_delayed_work(work),
+					struct xfs_ail, xa_work);
+	xfs_mount_t		*mp = ailp->xa_mount;
 	struct xfs_ail_cursor	*cur = &ailp->xa_cursors;
-	int		push_xfsbufd = 0;
+	xfs_log_item_t		*lip;
+	xfs_lsn_t		lsn;
+	xfs_lsn_t		target;
+	long			tout = 10;
+	int			flush_log = 0;
+	int			stuck = 0;
+	int			count = 0;
+	int			push_xfsbufd = 0;
 
 	spin_lock(&ailp->xa_lock);
+	target = ailp->xa_target;
 	xfs_trans_ail_cursor_init(ailp, cur);
-	lip = xfs_trans_ail_cursor_first(ailp, cur, *last_lsn);
+	lip = xfs_trans_ail_cursor_first(ailp, cur, ailp->xa_last_pushed_lsn);
 	if (!lip || XFS_FORCED_SHUTDOWN(mp)) {
 		/*
 		 * AIL is empty or our push has reached the end.
 		 */
 		xfs_trans_ail_cursor_done(ailp, cur);
 		spin_unlock(&ailp->xa_lock);
-		*last_lsn = 0;
-		return tout;
+		goto out_done;
 	}
 
 	XFS_STATS_INC(xs_push_ail);
@@ -281,8 +388,7 @@ xfsaild_push(
 	 * lots of contention on the AIL lists.
 	 */
 	lsn = lip->li_lsn;
-	flush_log = stuck = count = 0;
-	while ((XFS_LSN_CMP(lip->li_lsn, target) < 0)) {
+	while ((XFS_LSN_CMP(lip->li_lsn, target) <= 0)) {
 		int	lock_result;
 		/*
 		 * If we can lock the item without sleeping, unlock the AIL
@@ -301,13 +407,13 @@ xfsaild_push(
 		case XFS_ITEM_SUCCESS:
 			XFS_STATS_INC(xs_push_ail_success);
 			IOP_PUSH(lip);
-			last_pushed_lsn = lsn;
+			ailp->xa_last_pushed_lsn = lsn;
 			break;
 
 		case XFS_ITEM_PUSHBUF:
 			XFS_STATS_INC(xs_push_ail_pushbuf);
 			IOP_PUSHBUF(lip);
-			last_pushed_lsn = lsn;
+			ailp->xa_last_pushed_lsn = lsn;
 			push_xfsbufd = 1;
 			break;
 
@@ -319,7 +425,7 @@ xfsaild_push(
 
 		case XFS_ITEM_LOCKED:
 			XFS_STATS_INC(xs_push_ail_locked);
-			last_pushed_lsn = lsn;
+			ailp->xa_last_pushed_lsn = lsn;
 			stuck++;
 			break;
 
@@ -374,9 +480,27 @@ xfsaild_push(
 		wake_up_process(mp->m_ddev_targp->bt_task);
 	}
 
+	/* assume we have more work to do in a short while */
+out_done:
 	if (!count) {
 		/* We're past our target or empty, so idle */
-		last_pushed_lsn = 0;
+		ailp->xa_last_pushed_lsn = 0;
+
+		/*
+		 * We clear the XFS_AIL_PUSHING_BIT first before checking
+		 * whether the target has changed. If the target has changed,
+		 * this pushes the requeue race directly onto the result of the
+		 * atomic test/set bit, so we are guaranteed that either the
+		 * the pusher that changed the target or ourselves will requeue
+		 * the work (but not both).
+		 */
+		clear_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags);
+		smp_rmb();
+		if (XFS_LSN_CMP(ailp->xa_target, target) == 0 ||
+		    test_and_set_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags))
+			return;
+
+		tout = 50;
 	} else if (XFS_LSN_CMP(lsn, target) >= 0) {
 		/*
 		 * We reached the target so wait a bit longer for I/O to
@@ -384,7 +508,7 @@ xfsaild_push(
 		 * start the next scan from the start of the AIL.
 		 */
 		tout = 50;
-		last_pushed_lsn = 0;
+		ailp->xa_last_pushed_lsn = 0;
 	} else if ((stuck * 100) / count > 90) {
 		/*
 		 * Either there is a lot of contention on the AIL or we
@@ -396,14 +520,61 @@ xfsaild_push(
 		 * continuing from where we were.
 		 */
 		tout = 20;
-	} else {
-		/* more to do, but wait a short while before continuing */
-		tout = 10;
 	}
-	*last_lsn = last_pushed_lsn;
-	return tout;
+
+	/* There is more to do, requeue us.  */
+	queue_delayed_work(xfs_syncd_wq, &ailp->xa_work,
+					msecs_to_jiffies(tout));
+}
+
+/*
+ * This routine is called to move the tail of the AIL forward.  It does this by
+ * trying to flush items in the AIL whose lsns are below the given
+ * threshold_lsn.
+ *
+ * The push is run asynchronously in a workqueue, which means the caller needs
+ * to handle waiting on the async flush for space to become available.
+ * We don't want to interrupt any push that is in progress, hence we only queue
+ * work if we set the pushing bit approriately.
+ *
+ * We do this unlocked - we only need to know whether there is anything in the
+ * AIL at the time we are called. We don't need to access the contents of
+ * any of the objects, so the lock is not needed.
+ */
+void
+xfs_ail_push(
+	struct xfs_ail	*ailp,
+	xfs_lsn_t	threshold_lsn)
+{
+	xfs_log_item_t	*lip;
+
+	lip = xfs_ail_min(ailp);
+	if (!lip || XFS_FORCED_SHUTDOWN(ailp->xa_mount) ||
+	    XFS_LSN_CMP(threshold_lsn, ailp->xa_target) <= 0)
+		return;
+
+	/*
+	 * Ensure that the new target is noticed in push code before it clears
+	 * the XFS_AIL_PUSHING_BIT.
+	 */
+	smp_wmb();
+	xfs_trans_ail_copy_lsn(ailp, &ailp->xa_target, &threshold_lsn);
+	if (!test_and_set_bit(XFS_AIL_PUSHING_BIT, &ailp->xa_flags))
+		queue_delayed_work(xfs_syncd_wq, &ailp->xa_work, 0);
 }
 
+/*
+ * Push out all items in the AIL immediately
+ */
+void
+xfs_ail_push_all(
+	struct xfs_ail  *ailp)
+{
+	xfs_lsn_t       threshold_lsn = xfs_ail_max_lsn(ailp);
+
+	if (threshold_lsn)
+		xfs_ail_push(ailp, threshold_lsn);
+}
 
 /*
  * This is to be called when an item is unlocked that may have
@@ -615,7 +786,6 @@ xfs_trans_ail_init(
 	xfs_mount_t	*mp)
 {
 	struct xfs_ail	*ailp;
-	int		error;
 
 	ailp = kmem_zalloc(sizeof(struct xfs_ail), KM_MAYFAIL);
 	if (!ailp)
@@ -624,15 +794,9 @@ xfs_trans_ail_init(
 	ailp->xa_mount = mp;
 	INIT_LIST_HEAD(&ailp->xa_ail);
 	spin_lock_init(&ailp->xa_lock);
-	error = xfsaild_start(ailp);
-	if (error)
-		goto out_free_ailp;
+	INIT_DELAYED_WORK(&ailp->xa_work, xfs_ail_worker);
 	mp->m_ail = ailp;
 	return 0;
-
-out_free_ailp:
-	kmem_free(ailp);
-	return error;
 }
 
 void
@@ -641,124 +805,6 @@ xfs_trans_ail_destroy(
 {
 	struct xfs_ail	*ailp = mp->m_ail;
 
-	xfsaild_stop(ailp);
+	cancel_delayed_work_sync(&ailp->xa_work);
 	kmem_free(ailp);
 }
-
-/*
- * splice the log item list into the AIL at the given LSN.
- */
-STATIC void
-xfs_ail_splice(
-	struct xfs_ail	*ailp,
-	struct list_head *list,
-	xfs_lsn_t	lsn)
-{
-	xfs_log_item_t	*next_lip;
-
-	/*
-	 * If the list is empty, just insert the item.
-	 */
-	if (list_empty(&ailp->xa_ail)) {
-		list_splice(list, &ailp->xa_ail);
-		return;
-	}
-
-	list_for_each_entry_reverse(next_lip, &ailp->xa_ail, li_ail) {
-		if (XFS_LSN_CMP(next_lip->li_lsn, lsn) <= 0)
-			break;
-	}
-
-	ASSERT((&next_lip->li_ail == &ailp->xa_ail) ||
-	       (XFS_LSN_CMP(next_lip->li_lsn, lsn) <= 0));
-
-	list_splice_init(list, &next_lip->li_ail);
-	return;
-}
-
-/*
- * Delete the given item from the AIL.  Return a pointer to the item.
- */
-STATIC void
-xfs_ail_delete(
-	struct xfs_ail	*ailp,
-	xfs_log_item_t	*lip)
-{
-	xfs_ail_check(ailp, lip);
-	list_del(&lip->li_ail);
-	xfs_trans_ail_cursor_clear(ailp, lip);
-}
-
-/*
- * Return a pointer to the first item in the AIL.
- * If the AIL is empty, then return NULL.
- */
-STATIC xfs_log_item_t *
-xfs_ail_min(
-	struct xfs_ail	*ailp)
-{
-	if (list_empty(&ailp->xa_ail))
-		return NULL;
-
-	return list_first_entry(&ailp->xa_ail, xfs_log_item_t, li_ail);
-}
-
-/*
- * Return a pointer to the item which follows
- * the given item in the AIL.  If the given item
- * is the last item in the list, then return NULL.
- */
-STATIC xfs_log_item_t *
-xfs_ail_next(
-	struct xfs_ail	*ailp,
-	xfs_log_item_t	*lip)
-{
-	if (lip->li_ail.next == &ailp->xa_ail)
-		return NULL;
-
-	return list_first_entry(&lip->li_ail, xfs_log_item_t, li_ail);
-}
-
-#ifdef DEBUG
-/*
- * Check that the list is sorted as it should be.
- */
-STATIC void
-xfs_ail_check(
-	struct xfs_ail	*ailp,
-	xfs_log_item_t	*lip)
-{
-	xfs_log_item_t	*prev_lip;
-
-	if (list_empty(&ailp->xa_ail))
-		return;
-
-	/*
-	 * Check the next and previous entries are valid.
-	 */
-	ASSERT((lip->li_flags & XFS_LI_IN_AIL) != 0);
-	prev_lip = list_entry(lip->li_ail.prev, xfs_log_item_t, li_ail);
-	if (&prev_lip->li_ail != &ailp->xa_ail)
-		ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0);
-
-	prev_lip = list_entry(lip->li_ail.next, xfs_log_item_t, li_ail);
-	if (&prev_lip->li_ail != &ailp->xa_ail)
-		ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) >= 0);
-
-
-#ifdef XFS_TRANS_DEBUG
-	/*
-	 * Walk the list checking lsn ordering, and that every entry has the
-	 * XFS_LI_IN_AIL flag set. This is really expensive, so only do it
-	 * when specifically debugging the transaction subsystem.
-	 */
-	prev_lip = list_entry(&ailp->xa_ail, xfs_log_item_t, li_ail);
-	list_for_each_entry(lip, &ailp->xa_ail, li_ail) {
-		if (&prev_lip->li_ail != &ailp->xa_ail)
-			ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0);
-		ASSERT((lip->li_flags & XFS_LI_IN_AIL) != 0);
-		prev_lip = lip;
-	}
-#endif /* XFS_TRANS_DEBUG */
-}
-#endif /* DEBUG */
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index 16084d8ea23..048b0c689d3 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -81,7 +81,7 @@ xfs_trans_ijoin(
  *
  *
  * Grabs a reference to the inode which will be dropped when the transaction
- * is commited.  The inode will also be unlocked at that point.  The inode
+ * is committed.  The inode will also be unlocked at that point.  The inode
  * must be locked, and it cannot be associated with any transaction.
  */
 void
diff --git a/fs/xfs/xfs_trans_priv.h b/fs/xfs/xfs_trans_priv.h
index 35162c238fa..6b164e9e9a1 100644
--- a/fs/xfs/xfs_trans_priv.h
+++ b/fs/xfs/xfs_trans_priv.h
@@ -65,16 +65,22 @@ struct xfs_ail_cursor {
 struct xfs_ail {
 	struct xfs_mount	*xa_mount;
 	struct list_head	xa_ail;
-	uint			xa_gen;
-	struct task_struct	*xa_task;
 	xfs_lsn_t		xa_target;
 	struct xfs_ail_cursor	xa_cursors;
 	spinlock_t		xa_lock;
+	struct delayed_work	xa_work;
+	xfs_lsn_t		xa_last_pushed_lsn;
+	unsigned long		xa_flags;
 };
 
+#define XFS_AIL_PUSHING_BIT	0
+
 /*
  * From xfs_trans_ail.c
  */
+
+extern struct workqueue_struct	*xfs_ail_wq;	/* AIL workqueue */
+
 void	xfs_trans_ail_update_bulk(struct xfs_ail *ailp,
 				struct xfs_log_item **log_items, int nr_items,
 				xfs_lsn_t lsn) __releases(ailp->xa_lock);
@@ -98,12 +104,13 @@ xfs_trans_ail_delete(
 	xfs_trans_ail_delete_bulk(ailp, &lip, 1);
 }
 
-void			xfs_trans_ail_push(struct xfs_ail *, xfs_lsn_t);
+void			xfs_ail_push(struct xfs_ail *, xfs_lsn_t);
+void			xfs_ail_push_all(struct xfs_ail *);
+xfs_lsn_t		xfs_ail_min_lsn(struct xfs_ail *ailp);
+
 void			xfs_trans_unlocked_item(struct xfs_ail *,
 					xfs_log_item_t *);
 
-xfs_lsn_t		xfs_trans_ail_tail(struct xfs_ail *ailp);
-
 struct xfs_log_item	*xfs_trans_ail_cursor_first(struct xfs_ail *ailp,
 					struct xfs_ail_cursor *cur,
 					xfs_lsn_t lsn);
@@ -112,11 +119,6 @@ struct xfs_log_item	*xfs_trans_ail_cursor_next(struct xfs_ail *ailp,
 void			xfs_trans_ail_cursor_done(struct xfs_ail *ailp,
 					struct xfs_ail_cursor *cur);
 
-long	xfsaild_push(struct xfs_ail *, xfs_lsn_t *);
-void	xfsaild_wakeup(struct xfs_ail *, xfs_lsn_t);
-int	xfsaild_start(struct xfs_ail *);
-void	xfsaild_stop(struct xfs_ail *);
-
 #if BITS_PER_LONG != 64
 static inline void
 xfs_trans_ail_copy_lsn(
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index c48b4217ec4..b7a5fe7c52c 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -953,7 +953,7 @@ xfs_release(
 		 * If we previously truncated this file and removed old data
 		 * in the process, we want to initiate "early" writeout on
 		 * the last close.  This is an attempt to combat the notorious
-		 * NULL files problem which is particularly noticable from a
+		 * NULL files problem which is particularly noticeable from a
 		 * truncate down, buffered (re-)write (delalloc), followed by
 		 * a crash.  What we are effectively doing here is
 		 * significantly reducing the time window where we'd otherwise
@@ -982,7 +982,7 @@ xfs_release(
 		 *
 		 * Further, check if the inode is being opened, written and
 		 * closed frequently and we have delayed allocation blocks
-		 * oustanding (e.g. streaming writes from the NFS server),
+		 * outstanding (e.g. streaming writes from the NFS server),
 		 * truncating the blocks past EOF will cause fragmentation to
 		 * occur.
 		 *
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index d41c9488521..f1380287ed4 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -290,7 +290,7 @@ struct acpi_table_fadt {
 #define ACPI_FADT_APIC_CLUSTER      (1<<18)	/* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
 #define ACPI_FADT_APIC_PHYSICAL     (1<<19)	/* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
 
-/* Values for preferred_profile (Prefered Power Management Profiles) */
+/* Values for preferred_profile (Preferred Power Management Profiles) */
 
 enum acpi_prefered_pm_profiles {
 	PM_UNSPECIFIED = 0,
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index f2d2faf4d9a..e5a3f588000 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -194,6 +194,13 @@ extern void warn_slowpath_null(const char *file, const int line);
 #ifdef CONFIG_SMP
 # define WARN_ON_SMP(x)			WARN_ON(x)
 #else
+/*
+ * Use of ({0;}) because WARN_ON_SMP(x) may be used either as
+ * a stand alone line statement or as a condition in an if ()
+ * statement.
+ * A simple "0" would cause gcc to give a "statement has no effect"
+ * warning.
+ */
 # define WARN_ON_SMP(x)			({0;})
 #endif
 
diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h
index 942d30b5aab..0dd4e87f6fb 100644
--- a/include/asm-generic/siginfo.h
+++ b/include/asm-generic/siginfo.h
@@ -192,7 +192,7 @@ typedef struct siginfo {
  * SIGBUS si_codes
  */
 #define BUS_ADRALN	(__SI_FAULT|1)	/* invalid address alignment */
-#define BUS_ADRERR	(__SI_FAULT|2)	/* non-existant physical address */
+#define BUS_ADRERR	(__SI_FAULT|2)	/* non-existent physical address */
 #define BUS_OBJERR	(__SI_FAULT|3)	/* object specific hardware error */
 /* hardware memory error consumed on a machine check: action required */
 #define BUS_MCEERR_AR	(__SI_FAULT|4)
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 32c45e5fe0a..077c00d94f6 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -170,6 +170,10 @@
 	STRUCT_ALIGN();							\
 	*(__tracepoints)						\
 	/* implement dynamic printk debug */				\
+	. = ALIGN(8);                                                   \
+	VMLINUX_SYMBOL(__start___jump_table) = .;                       \
+	*(__jump_table)                                                 \
+	VMLINUX_SYMBOL(__stop___jump_table) = .;                        \
 	. = ALIGN(8);							\
 	VMLINUX_SYMBOL(__start___verbose) = .;                          \
 	*(__verbose)                                                    \
@@ -228,8 +232,6 @@
 									\
 	BUG_TABLE							\
 									\
-	JUMP_TABLE							\
-									\
 	/* PCI quirks */						\
 	.pci_fixup        : AT(ADDR(.pci_fixup) - LOAD_OFFSET) {	\
 		VMLINUX_SYMBOL(__start_pci_fixups_early) = .;		\
@@ -274,70 +276,70 @@
 	/* Kernel symbol table: Normal symbols */			\
 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
-		*(__ksymtab)						\
+		*(SORT(___ksymtab+*))					\
 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
 	}								\
 									\
 	/* Kernel symbol table: GPL-only symbols */			\
 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
-		*(__ksymtab_gpl)					\
+		*(SORT(___ksymtab_gpl+*))				\
 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
 	}								\
 									\
 	/* Kernel symbol table: Normal unused symbols */		\
 	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
 		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
-		*(__ksymtab_unused)					\
+		*(SORT(___ksymtab_unused+*))				\
 		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
 	}								\
 									\
 	/* Kernel symbol table: GPL-only unused symbols */		\
 	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
 		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
-		*(__ksymtab_unused_gpl)					\
+		*(SORT(___ksymtab_unused_gpl+*))			\
 		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
 	}								\
 									\
 	/* Kernel symbol table: GPL-future-only symbols */		\
 	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
 		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
-		*(__ksymtab_gpl_future)					\
+		*(SORT(___ksymtab_gpl_future+*))			\
 		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
 	}								\
 									\
 	/* Kernel symbol table: Normal symbols */			\
 	__kcrctab         : AT(ADDR(__kcrctab) - LOAD_OFFSET) {		\
 		VMLINUX_SYMBOL(__start___kcrctab) = .;			\
-		*(__kcrctab)						\
+		*(SORT(___kcrctab+*))					\
 		VMLINUX_SYMBOL(__stop___kcrctab) = .;			\
 	}								\
 									\
 	/* Kernel symbol table: GPL-only symbols */			\
 	__kcrctab_gpl     : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) {	\
 		VMLINUX_SYMBOL(__start___kcrctab_gpl) = .;		\
-		*(__kcrctab_gpl)					\
+		*(SORT(___kcrctab_gpl+*))				\
 		VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .;		\
 	}								\
 									\
 	/* Kernel symbol table: Normal unused symbols */		\
 	__kcrctab_unused  : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) {	\
 		VMLINUX_SYMBOL(__start___kcrctab_unused) = .;		\
-		*(__kcrctab_unused)					\
+		*(SORT(___kcrctab_unused+*))				\
 		VMLINUX_SYMBOL(__stop___kcrctab_unused) = .;		\
 	}								\
 									\
 	/* Kernel symbol table: GPL-only unused symbols */		\
 	__kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
 		VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .;	\
-		*(__kcrctab_unused_gpl)					\
+		*(SORT(___kcrctab_unused_gpl+*))			\
 		VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .;	\
 	}								\
 									\
 	/* Kernel symbol table: GPL-future-only symbols */		\
 	__kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
 		VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .;	\
-		*(__kcrctab_gpl_future)					\
+		*(SORT(___kcrctab_gpl_future+*))			\
 		VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .;	\
 	}								\
 									\
@@ -589,14 +591,6 @@
 #define BUG_TABLE
 #endif
 
-#define JUMP_TABLE							\
-	. = ALIGN(8);							\
-	__jump_table : AT(ADDR(__jump_table) - LOAD_OFFSET) {		\
-		VMLINUX_SYMBOL(__start___jump_table) = .;		\
-		*(__jump_table)						\
-		VMLINUX_SYMBOL(__stop___jump_table) = .;		\
-	}
-
 #ifdef CONFIG_PM_TRACE
 #define TRACEDATA							\
 	. = ALIGN(4);							\
@@ -773,7 +767,7 @@
  * the sections that has this restriction (or similar)
  * is located before the ones requiring PAGE_SIZE alignment.
  * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
- * matches the requirment of PAGE_ALIGNED_DATA.
+ * matches the requirement of PAGE_ALIGNED_DATA.
  *
  * use 0 as page_align if page_aligned data is not used */
 #define RW_DATA_SECTION(cacheline, pagealigned, inittask)		\
diff --git a/include/asm-generic/xor.h b/include/asm-generic/xor.h
index aaab875e1a3..6028fb86225 100644
--- a/include/asm-generic/xor.h
+++ b/include/asm-generic/xor.h
@@ -13,7 +13,7 @@
  * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <asm/processor.h>
+#include <linux/prefetch.h>
 
 static void
 xor_8regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index ad5770f2315..202424d17ed 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -95,7 +95,7 @@ struct drm_device;
  * drm_core, drm_driver, drm_kms
  * drm_core level can be used in the generic drm code. For example:
  * 	drm_ioctl, drm_mm, drm_memory
- * The macro definiton of DRM_DEBUG is used.
+ * The macro definition of DRM_DEBUG is used.
  * 	DRM_DEBUG(fmt, args...)
  * 	The debug info by using the DRM_DEBUG can be obtained by adding
  * 	the boot option of "drm.debug=1".
@@ -808,7 +808,7 @@ struct drm_driver {
 	 *
 	 * \return Flags, or'ed together as follows:
 	 *
-	 * DRM_SCANOUTPOS_VALID = Query successfull.
+	 * DRM_SCANOUTPOS_VALID = Query successful.
 	 * DRM_SCANOUTPOS_INVBL = Inside vblank.
 	 * DRM_SCANOUTPOS_ACCURATE = Returned position is accurate. A lack of
 	 * this flag means that returned position may be offset by a constant
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 60edf9be31e..d94684b7ba3 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -65,7 +65,7 @@ enum drm_mode_status {
     MODE_H_ILLEGAL,	/* mode has illegal horizontal timings */
     MODE_V_ILLEGAL,	/* mode has illegal horizontal timings */
     MODE_BAD_WIDTH,	/* requires an unsupported linepitch */
-    MODE_NOMODE,	/* no mode with a maching name */
+    MODE_NOMODE,	/* no mode with a matching name */
     MODE_NO_INTERLACE,	/* interlaced mode not supported */
     MODE_NO_DBLESCAN,	/* doublescan mode not supported */
     MODE_NO_VSCAN,	/* multiscan mode not supported */
@@ -321,7 +321,7 @@ struct drm_crtc_funcs {
 
 	/*
 	 * Flip to the given framebuffer.  This implements the page
-	 * flip ioctl descibed in drm_mode.h, specifically, the
+	 * flip ioctl described in drm_mode.h, specifically, the
 	 * implementation must return immediately and block all
 	 * rendering to the current fb until the flip has completed.
 	 * If userspace set the event flag in the ioctl, the event
@@ -778,6 +778,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
 				    void *data, struct drm_file *file_priv);
 extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
 				    void *data, struct drm_file *file_priv);
+extern u8 *drm_find_cea_extension(struct edid *edid);
 extern bool drm_detect_hdmi_monitor(struct edid *edid);
 extern bool drm_detect_monitor_audio(struct edid *edid);
 extern int drm_mode_page_flip_ioctl(struct drm_device *dev,
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index f22e7fe4b6d..c99c3d3e781 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -118,6 +118,7 @@ int drm_fb_helper_setcolreg(unsigned regno,
 			    unsigned transp,
 			    struct fb_info *info);
 
+bool drm_fb_helper_restore_fbdev_mode(struct drm_fb_helper *fb_helper);
 void drm_fb_helper_restore(void);
 void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
 			    uint32_t fb_width, uint32_t fb_height);
@@ -126,7 +127,7 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
 
 int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info);
 
-bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper);
+int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper);
 bool drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel);
 int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper);
 int drm_fb_helper_debug_enter(struct fb_info *info);
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
index b1e7809e5e1..564b14aa7e1 100644
--- a/include/drm/drm_mm.h
+++ b/include/drm/drm_mm.h
@@ -56,7 +56,7 @@ struct drm_mm_node {
 };
 
 struct drm_mm {
-	/* List of all memory nodes that immediatly preceed a free hole. */
+	/* List of all memory nodes that immediately precede a free hole. */
 	struct list_head hole_stack;
 	/* head_node.node_list is the list of all memory nodes, ordered
 	 * according to the (increasing) start address of the memory node. */
@@ -86,7 +86,7 @@ static inline bool drm_mm_initialized(struct drm_mm *mm)
 }
 #define drm_mm_for_each_node(entry, mm) list_for_each_entry(entry, \
 						&(mm)->head_node.node_list, \
-						node_list);
+						node_list)
 #define drm_mm_for_each_scanned_node_reverse(entry, n, mm) \
 	for (entry = (mm)->prev_scanned_node, \
 		next = entry ? list_entry(entry->node_list.next, \
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index ae6b7a3dbec..c4961ea50a4 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -277,7 +277,7 @@ struct drm_mode_mode_cmd {
 #define DRM_MODE_CURSOR_MOVE	(1<<1)
 
 /*
- * depending on the value in flags diffrent members are used.
+ * depending on the value in flags different members are used.
  *
  * CURSOR_BO uses
  *    crtc
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 820ee902948..f04b2a3b0f4 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -155,6 +155,7 @@
 	{0x1002, 0x6719, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x671c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x671d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x671f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6720, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6721, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6722, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
@@ -167,6 +168,7 @@
 	{0x1002, 0x6729, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6739, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x673e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6740, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6741, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6742, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -199,6 +201,7 @@
 	{0x1002, 0x688D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6898, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6899, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x689b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x689c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x689d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x689e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
@@ -209,7 +212,9 @@
 	{0x1002, 0x68b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68b8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68b9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68ba, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68be, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68bf, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -472,6 +477,8 @@
 	{0x1002, 0x9803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0x1002, 0x9804, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
 	{0, 0, 0}
 
 #define r128_PCI_IDS \
diff --git a/include/drm/mga_drm.h b/include/drm/mga_drm.h
index c16097f99be..fca817009e1 100644
--- a/include/drm/mga_drm.h
+++ b/include/drm/mga_drm.h
@@ -107,7 +107,7 @@
  */
 #define MGA_NR_SAREA_CLIPRECTS	8
 
-/* 2 heaps (1 for card, 1 for agp), each divided into upto 128
+/* 2 heaps (1 for card, 1 for agp), each divided into up to 128
  * regions, subject to a minimum region size of (1<<16) == 64k.
  *
  * Clients may subdivide regions internally, but when sharing between
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 3dec41cf834..787f7b6fd62 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -641,7 +641,7 @@ typedef struct drm_radeon_vertex2 {
 } drm_radeon_vertex2_t;
 
 /* v1.3 - obsoletes drm_radeon_vertex2
- *      - allows arbitarily large cliprect list
+ *      - allows arbitrarily large cliprect list
  *      - allows updating of tcl packet, vector and scalar state
  *      - allows memory-efficient description of state updates
  *      - allows state to be emitted without a primitive
@@ -909,6 +909,8 @@ struct drm_radeon_cs {
 #define RADEON_INFO_WANT_CMASK		0x08 /* get access to CMASK on r300 */
 #define RADEON_INFO_CLOCK_CRYSTAL_FREQ	0x09 /* clock crystal frequency */
 #define RADEON_INFO_NUM_BACKENDS	0x0a /* DB/backends for r600+ - need for OQ */
+#define RADEON_INFO_NUM_TILE_PIPES	0x0b /* tile pipes for r600+ */
+#define RADEON_INFO_FUSION_GART_WORKING	0x0c /* fusion writes to GTT were broken before this */
 
 struct drm_radeon_info {
 	uint32_t		request;
diff --git a/include/drm/savage_drm.h b/include/drm/savage_drm.h
index 4863cf6bf96..818d49be2e6 100644
--- a/include/drm/savage_drm.h
+++ b/include/drm/savage_drm.h
@@ -29,7 +29,7 @@
 #ifndef __SAVAGE_SAREA_DEFINES__
 #define __SAVAGE_SAREA_DEFINES__
 
-/* 2 heaps (1 for card, 1 for agp), each divided into upto 128
+/* 2 heaps (1 for card, 1 for agp), each divided into up to 128
  * regions, subject to a minimum region size of (1<<16) == 64k.
  *
  * Clients may subdivide regions internally, but when sharing between
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 50852aad260..62a0e4c4cee 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -50,10 +50,10 @@ struct drm_mm_node;
  *
  * @fpfn:		first valid page frame number to put the object
  * @lpfn:		last valid page frame number to put the object
- * @num_placement:	number of prefered placements
- * @placement:		prefered placements
- * @num_busy_placement:	number of prefered placements when need to evict buffer
- * @busy_placement:	prefered placements when need to evict buffer
+ * @num_placement:	number of preferred placements
+ * @placement:		preferred placements
+ * @num_busy_placement:	number of preferred placements when need to evict buffer
+ * @busy_placement:	preferred placements when need to evict buffer
  *
  * Structure indicating the placement you request for an object.
  */
@@ -158,9 +158,9 @@ struct ttm_tt;
  * the object is destroyed.
  * @event_queue: Queue for processes waiting on buffer object status change.
  * @mem: structure describing current placement.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
  * pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object.
+ * holds a pointer to a persistent shmem object.
  * @ttm: TTM structure holding system pages.
  * @evicted: Whether the object was evicted without user-space knowing.
  * @cpu_writes: For synchronization. Number of cpu writers.
@@ -221,7 +221,7 @@ struct ttm_buffer_object {
 	 */
 
 	struct ttm_mem_reg mem;
-	struct file *persistant_swap_storage;
+	struct file *persistent_swap_storage;
 	struct ttm_tt *ttm;
 	bool evicted;
 
@@ -459,9 +459,9 @@ extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo);
  * user buffer object.
  * @interruptible: If needing to sleep to wait for GPU resources,
  * sleep interruptible.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
  * pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object. Typically, this would
+ * holds a pointer to a persistent shmem object. Typically, this would
  * point to the shmem object backing a GEM object if TTM is used to back a
  * GEM user interface.
  * @acc_size: Accounted size for this object.
@@ -490,7 +490,7 @@ extern int ttm_bo_init(struct ttm_bo_device *bdev,
 			uint32_t page_alignment,
 			unsigned long buffer_start,
 			bool interrubtible,
-			struct file *persistant_swap_storage,
+			struct file *persistent_swap_storage,
 			size_t acc_size,
 			void (*destroy) (struct ttm_buffer_object *));
 /**
@@ -506,9 +506,9 @@ extern int ttm_bo_init(struct ttm_bo_device *bdev,
  * user buffer object.
  * @interruptible: If needing to sleep while waiting for GPU resources,
  * sleep interruptible.
- * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
  * pinned in physical memory. If this behaviour is not desired, this member
- * holds a pointer to a persistant shmem object. Typically, this would
+ * holds a pointer to a persistent shmem object. Typically, this would
  * point to the shmem object backing a GEM object if TTM is used to back a
  * GEM user interface.
  * @p_bo: On successful completion *p_bo points to the created object.
@@ -528,7 +528,7 @@ extern int ttm_bo_create(struct ttm_bo_device *bdev,
 				uint32_t page_alignment,
 				unsigned long buffer_start,
 				bool interruptible,
-				struct file *persistant_swap_storage,
+				struct file *persistent_swap_storage,
 				struct ttm_buffer_object **p_bo);
 
 /**
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index efed0820d9f..09af2d746d1 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -122,7 +122,7 @@ struct ttm_backend {
 #define TTM_PAGE_FLAG_USER_DIRTY      (1 << 2)
 #define TTM_PAGE_FLAG_WRITE           (1 << 3)
 #define TTM_PAGE_FLAG_SWAPPED         (1 << 4)
-#define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
+#define TTM_PAGE_FLAG_PERSISTENT_SWAP (1 << 5)
 #define TTM_PAGE_FLAG_ZERO_ALLOC      (1 << 6)
 #define TTM_PAGE_FLAG_DMA32           (1 << 7)
 
@@ -223,9 +223,9 @@ struct ttm_mem_type_manager_func {
 	 * @mem::mm_node should be set to a non-null value, and
 	 * @mem::start should be set to a value identifying the beginning
 	 * of the range allocated, and the function should return zero.
-	 * If the memory region accomodate the buffer object, @mem::mm_node
+	 * If the memory region accommodate the buffer object, @mem::mm_node
 	 * should be set to NULL, and the function should return 0.
-	 * If a system error occured, preventing the request to be fulfilled,
+	 * If a system error occurred, preventing the request to be fulfilled,
 	 * the function should return a negative error code.
 	 *
 	 * Note that @mem::mm_node will only be dereferenced by
@@ -714,7 +714,7 @@ extern void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages);
  */
 extern int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement);
 extern int ttm_tt_swapout(struct ttm_tt *ttm,
-			  struct file *persistant_swap_storage);
+			  struct file *persistent_swap_storage);
 
 /*
  * ttm_bo.c
@@ -841,7 +841,7 @@ extern void ttm_mem_io_unlock(struct ttm_mem_type_manager *man);
  * different order, either by will or as a result of a buffer being evicted
  * to make room for a buffer already reserved. (Buffers are reserved before
  * they are evicted). The following algorithm prevents such deadlocks from
- * occuring:
+ * occurring:
  * 1) Buffers are reserved with the lru spinlock held. Upon successful
  * reservation they are removed from the lru list. This stops a reserved buffer
  * from being evicted. However the lru spinlock is released between the time
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
index 650e6bf6f69..5c36432d9ce 100644
--- a/include/drm/vmwgfx_drm.h
+++ b/include/drm/vmwgfx_drm.h
@@ -592,7 +592,7 @@ struct drm_vmw_stream_arg {
 /**
  * DRM_VMW_UPDATE_LAYOUT - Update layout
  *
- * Updates the prefered modes and connection status for connectors. The
+ * Updates the preferred modes and connection status for connectors. The
  * command conisits of one drm_vmw_update_layout_arg pointing out a array
  * of num_outputs drm_vmw_rect's.
  */
diff --git a/include/keys/ceph-type.h b/include/keys/ceph-type.h
new file mode 100644
index 00000000000..f69c4ac197a
--- /dev/null
+++ b/include/keys/ceph-type.h
@@ -0,0 +1,8 @@
+#ifndef _KEYS_CEPH_TYPE_H
+#define _KEYS_CEPH_TYPE_H
+
+#include <linux/key.h>
+
+extern struct key_type key_type_ceph;
+
+#endif
diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h
new file mode 100644
index 00000000000..c5d6095b46f
--- /dev/null
+++ b/include/linux/alarmtimer.h
@@ -0,0 +1,40 @@
+#ifndef _LINUX_ALARMTIMER_H
+#define _LINUX_ALARMTIMER_H
+
+#include <linux/time.h>
+#include <linux/hrtimer.h>
+#include <linux/timerqueue.h>
+#include <linux/rtc.h>
+
+enum alarmtimer_type {
+	ALARM_REALTIME,
+	ALARM_BOOTTIME,
+
+	ALARM_NUMTYPE,
+};
+
+/**
+ * struct alarm - Alarm timer structure
+ * @node:	timerqueue node for adding to the event list this value
+ *		also includes the expiration time.
+ * @period:	Period for recuring alarms
+ * @function:	Function pointer to be executed when the timer fires.
+ * @type:	Alarm type (BOOTTIME/REALTIME)
+ * @enabled:	Flag that represents if the alarm is set to fire or not
+ * @data:	Internal data value.
+ */
+struct alarm {
+	struct timerqueue_node	node;
+	ktime_t			period;
+	void			(*function)(struct alarm *);
+	enum alarmtimer_type	type;
+	bool			enabled;
+	void			*data;
+};
+
+void alarm_init(struct alarm *alarm, enum alarmtimer_type type,
+		void (*function)(struct alarm *));
+void alarm_start(struct alarm *alarm, ktime_t start, ktime_t period);
+void alarm_cancel(struct alarm *alarm);
+
+#endif
diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
index 24d26efd143..e82e3ee2c54 100644
--- a/include/linux/amba/clcd.h
+++ b/include/linux/amba/clcd.h
@@ -136,7 +136,7 @@ struct clcd_board {
 	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
 
 	/*
-	 * Compulsary.  Decode fb->fb.var into regs->*.  In the case of
+	 * Compulsory.  Decode fb->fb.var into regs->*.  In the case of
 	 * fixed timing, set regs->* to the register values required.
 	 */
 	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index f60227088b7..21114810c7c 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -30,15 +30,15 @@ struct dma_chan;
  * @cd_invert: true if the gpio_cd pin value is active low
  * @capabilities: the capabilities of the block as implemented in
  * this platform, signify anything MMC_CAP_* from mmc/host.h
- * @dma_filter: function used to select an apropriate RX and TX
+ * @dma_filter: function used to select an appropriate RX and TX
  * DMA channel to be used for DMA, if and only if you're deploying the
  * generic DMA engine
  * @dma_rx_param: parameter passed to the DMA allocation
- * filter in order to select an apropriate RX channel. If
+ * filter in order to select an appropriate RX channel. If
  * there is a bidirectional RX+TX channel, then just specify
  * this and leave dma_tx_param set to NULL
  * @dma_tx_param: parameter passed to the DMA allocation
- * filter in order to select an apropriate TX channel. If this
+ * filter in order to select an appropriate TX channel. If this
  * is NULL the driver will attempt to use the RX channel as a
  * bidirectional channel
  */
diff --git a/include/linux/bit_spinlock.h b/include/linux/bit_spinlock.h
index e612575a259..b4326bfa684 100644
--- a/include/linux/bit_spinlock.h
+++ b/include/linux/bit_spinlock.h
@@ -23,11 +23,11 @@ static inline void bit_spin_lock(int bitnum, unsigned long *addr)
 	preempt_disable();
 #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
 	while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
-		while (test_bit(bitnum, addr)) {
-			preempt_enable();
+		preempt_enable();
+		do {
 			cpu_relax();
-			preempt_disable();
-		}
+		} while (test_bit(bitnum, addr));
+		preempt_disable();
 	}
 #endif
 	__acquire(bitlock);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 16a902f099a..2ad95fa1d13 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -388,20 +388,19 @@ struct request_queue
 #define	QUEUE_FLAG_SYNCFULL	3	/* read queue has been filled */
 #define QUEUE_FLAG_ASYNCFULL	4	/* write queue has been filled */
 #define QUEUE_FLAG_DEAD		5	/* queue being torn down */
-#define QUEUE_FLAG_REENTER	6	/* Re-entrancy avoidance */
-#define QUEUE_FLAG_ELVSWITCH	7	/* don't use elevator, just do FIFO */
-#define QUEUE_FLAG_BIDI		8	/* queue supports bidi requests */
-#define QUEUE_FLAG_NOMERGES     9	/* disable merge attempts */
-#define QUEUE_FLAG_SAME_COMP   10	/* force complete on same CPU */
-#define QUEUE_FLAG_FAIL_IO     11	/* fake timeout */
-#define QUEUE_FLAG_STACKABLE   12	/* supports request stacking */
-#define QUEUE_FLAG_NONROT      13	/* non-rotational device (SSD) */
+#define QUEUE_FLAG_ELVSWITCH	6	/* don't use elevator, just do FIFO */
+#define QUEUE_FLAG_BIDI		7	/* queue supports bidi requests */
+#define QUEUE_FLAG_NOMERGES     8	/* disable merge attempts */
+#define QUEUE_FLAG_SAME_COMP	9	/* force complete on same CPU */
+#define QUEUE_FLAG_FAIL_IO     10	/* fake timeout */
+#define QUEUE_FLAG_STACKABLE   11	/* supports request stacking */
+#define QUEUE_FLAG_NONROT      12	/* non-rotational device (SSD) */
 #define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
-#define QUEUE_FLAG_IO_STAT     15	/* do IO stats */
-#define QUEUE_FLAG_DISCARD     16	/* supports DISCARD */
-#define QUEUE_FLAG_NOXMERGES   17	/* No extended merges */
-#define QUEUE_FLAG_ADD_RANDOM  18	/* Contributes to random pool */
-#define QUEUE_FLAG_SECDISCARD  19	/* supports SECDISCARD */
+#define QUEUE_FLAG_IO_STAT     13	/* do IO stats */
+#define QUEUE_FLAG_DISCARD     14	/* supports DISCARD */
+#define QUEUE_FLAG_NOXMERGES   15	/* No extended merges */
+#define QUEUE_FLAG_ADD_RANDOM  16	/* Contributes to random pool */
+#define QUEUE_FLAG_SECDISCARD  17	/* supports SECDISCARD */
 
 #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
 				 (1 << QUEUE_FLAG_STACKABLE)	|	\
@@ -697,8 +696,9 @@ extern void blk_start_queue(struct request_queue *q);
 extern void blk_stop_queue(struct request_queue *q);
 extern void blk_sync_queue(struct request_queue *q);
 extern void __blk_stop_queue(struct request_queue *q);
-extern void __blk_run_queue(struct request_queue *q, bool force_kblockd);
+extern void __blk_run_queue(struct request_queue *q);
 extern void blk_run_queue(struct request_queue *);
+extern void blk_run_queue_async(struct request_queue *q);
 extern int blk_rq_map_user(struct request_queue *, struct request *,
 			   struct rq_map_data *, void __user *, unsigned long,
 			   gfp_t);
@@ -857,26 +857,39 @@ extern void blk_put_queue(struct request_queue *);
 struct blk_plug {
 	unsigned long magic;
 	struct list_head list;
+	struct list_head cb_list;
 	unsigned int should_sort;
 };
+struct blk_plug_cb {
+	struct list_head list;
+	void (*callback)(struct blk_plug_cb *);
+};
 
 extern void blk_start_plug(struct blk_plug *);
 extern void blk_finish_plug(struct blk_plug *);
-extern void __blk_flush_plug(struct task_struct *, struct blk_plug *);
+extern void blk_flush_plug_list(struct blk_plug *, bool);
 
 static inline void blk_flush_plug(struct task_struct *tsk)
 {
 	struct blk_plug *plug = tsk->plug;
 
-	if (unlikely(plug))
-		__blk_flush_plug(tsk, plug);
+	if (plug)
+		blk_flush_plug_list(plug, false);
+}
+
+static inline void blk_schedule_flush_plug(struct task_struct *tsk)
+{
+	struct blk_plug *plug = tsk->plug;
+
+	if (plug)
+		blk_flush_plug_list(plug, true);
 }
 
 static inline bool blk_needs_flush_plug(struct task_struct *tsk)
 {
 	struct blk_plug *plug = tsk->plug;
 
-	return plug && !list_empty(&plug->list);
+	return plug && (!list_empty(&plug->list) || !list_empty(&plug->cb_list));
 }
 
 /*
@@ -1206,6 +1219,7 @@ struct blk_integrity {
 	struct kobject		kobj;
 };
 
+extern bool blk_integrity_is_initialized(struct gendisk *);
 extern int blk_integrity_register(struct gendisk *, struct blk_integrity *);
 extern void blk_integrity_unregister(struct gendisk *);
 extern int blk_integrity_compare(struct gendisk *, struct gendisk *);
@@ -1262,6 +1276,7 @@ queue_max_integrity_segments(struct request_queue *q)
 #define queue_max_integrity_segments(a)		(0)
 #define blk_integrity_merge_rq(a, b, c)		(0)
 #define blk_integrity_merge_bio(a, b, c)	(0)
+#define blk_integrity_is_initialized(a)		(0)
 
 #endif /* CONFIG_BLK_DEV_INTEGRITY */
 
@@ -1312,6 +1327,11 @@ static inline void blk_flush_plug(struct task_struct *task)
 {
 }
 
+static inline void blk_schedule_flush_plug(struct task_struct *task)
+{
+}
+
+
 static inline bool blk_needs_flush_plug(struct task_struct *tsk)
 {
 	return false;
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index b8613e806aa..01eca1794e1 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -111,6 +111,8 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 	__alloc_bootmem_nopanic(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_node_nopanic(pgdat, x) \
+	__alloc_bootmem_node_nopanic(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_pages_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_pages_node_nopanic(pgdat, x) \
diff --git a/include/linux/bsearch.h b/include/linux/bsearch.h
new file mode 100644
index 00000000000..90b1aa86722
--- /dev/null
+++ b/include/linux/bsearch.h
@@ -0,0 +1,9 @@
+#ifndef _LINUX_BSEARCH_H
+#define _LINUX_BSEARCH_H
+
+#include <linux/types.h>
+
+void *bsearch(const void *key, const void *base, size_t num, size_t size,
+	      int (*cmp)(const void *key, const void *elt));
+
+#endif /* _LINUX_BSEARCH_H */
diff --git a/include/linux/can/core.h b/include/linux/can/core.h
index 6f70a6d3a16..5ce6b5d62ec 100644
--- a/include/linux/can/core.h
+++ b/include/linux/can/core.h
@@ -44,8 +44,8 @@ struct can_proto {
 
 /* function prototypes for the CAN networklayer core (af_can.c) */
 
-extern int  can_proto_register(struct can_proto *cp);
-extern void can_proto_unregister(struct can_proto *cp);
+extern int  can_proto_register(const struct can_proto *cp);
+extern void can_proto_unregister(const struct can_proto *cp);
 
 extern int  can_rx_register(struct net_device *dev, canid_t can_id,
 			    canid_t mask,
diff --git a/include/linux/can/error.h b/include/linux/can/error.h
index d4127fd9e68..5958074302a 100644
--- a/include/linux/can/error.h
+++ b/include/linux/can/error.h
@@ -51,7 +51,7 @@
 #define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
 #define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
 #define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
-#define CAN_ERR_PROT_TX          0x80 /* error occured on transmission */
+#define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
 
 /* error in CAN protocol (location) / data[3] */
 #define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
index 3250de935e1..34542d374dd 100644
--- a/include/linux/can/netlink.h
+++ b/include/linux/can/netlink.h
@@ -17,7 +17,7 @@
 /*
  * CAN bit-timing parameters
  *
- * For futher information, please read chapter "8 BIT TIMING
+ * For further information, please read chapter "8 BIT TIMING
  * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
  * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
  */
diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h
index 8e20540043f..089fe43211a 100644
--- a/include/linux/can/platform/mcp251x.h
+++ b/include/linux/can/platform/mcp251x.h
@@ -12,6 +12,7 @@
 /**
  * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
  * @oscillator_frequency:       - oscillator frequency in Hz
+ * @irq_flags:                  - IRQF configuration flags
  * @board_specific_setup:       - called before probing the chip (power,reset)
  * @transceiver_enable:         - called to power on/off the transceiver
  * @power_enable:               - called to power on/off the mcp *and* the
@@ -24,6 +25,7 @@
 
 struct mcp251x_platform_data {
 	unsigned long oscillator_frequency;
+	unsigned long irq_flags;
 	int (*board_specific_setup)(struct spi_device *spi);
 	int (*transceiver_enable)(int enable);
 	int (*power_enable) (int enable);
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 16ee8b49a20..4554db0cde8 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -355,7 +355,12 @@ struct cpu_vfs_cap_data {
 
 #define CAP_SYSLOG           34
 
-#define CAP_LAST_CAP         CAP_SYSLOG
+/* Allow triggering something that will wake the system */
+
+#define CAP_WAKE_ALARM            35
+
+
+#define CAP_LAST_CAP         CAP_WAKE_ALARM
 
 #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
 
@@ -546,18 +551,7 @@ extern bool has_capability_noaudit(struct task_struct *t, int cap);
 extern bool capable(int cap);
 extern bool ns_capable(struct user_namespace *ns, int cap);
 extern bool task_ns_capable(struct task_struct *t, int cap);
-
-/**
- * nsown_capable - Check superior capability to one's own user_ns
- * @cap: The capability in question
- *
- * Return true if the current task has the given superior capability
- * targeted at its own user namespace.
- */
-static inline bool nsown_capable(int cap)
-{
-	return ns_capable(current_user_ns(), cap);
-}
+extern bool nsown_capable(int cap);
 
 /* audit system wants to get cap info from files as well */
 extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
index 0908daf7bf5..80093a8d4f6 100644
--- a/include/linux/cdk.h
+++ b/include/linux/cdk.h
@@ -149,7 +149,7 @@ typedef struct cdkhdr {
 /*
  *	Define the memory mapping structure. This structure is pointed to by
  *	the memp field in the stlcdkhdr struct. As many as these structures
- *	as required are layed out in shared memory to define how the rest of
+ *	as required are laid out in shared memory to define how the rest of
  *	shared memory is divided up. There will be one for each port.
  */
 typedef struct cdkmem {
diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h
index 7fff521d7eb..aa13392a7ef 100644
--- a/include/linux/ceph/auth.h
+++ b/include/linux/ceph/auth.h
@@ -67,12 +67,12 @@ struct ceph_auth_client {
 	bool negotiating;       /* true if negotiating protocol */
 	const char *name;       /* entity name */
 	u64 global_id;          /* our unique id in system */
-	const char *secret;     /* our secret key */
+	const struct ceph_crypto_key *key;     /* our secret key */
 	unsigned want_keys;     /* which services we want */
 };
 
 extern struct ceph_auth_client *ceph_auth_init(const char *name,
-					       const char *secret);
+					       const struct ceph_crypto_key *key);
 extern void ceph_auth_destroy(struct ceph_auth_client *ac);
 
 extern void ceph_auth_reset(struct ceph_auth_client *ac);
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index 0d2e0fffb47..6365f041745 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -61,7 +61,7 @@ struct ceph_options {
 					      pointer type of args */
 	int num_mon;
 	char *name;
-	char *secret;
+	struct ceph_crypto_key *key;
 };
 
 /*
diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h
index 6f9f19d6659..b454dfce60d 100644
--- a/include/linux/cfag12864b.h
+++ b/include/linux/cfag12864b.h
@@ -44,7 +44,7 @@ extern unsigned char * cfag12864b_buffer;
 /*
  * Get the refresh rate of the LCD
  *
- * Returns the refresh rate (hertzs).
+ * Returns the refresh rate (hertz).
  */
 extern unsigned int cfag12864b_getrate(void);
 
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e654fa23991..5ac7ebc36db 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -240,7 +240,7 @@ struct cgroup {
 	/* For RCU-protected deletion */
 	struct rcu_head rcu_head;
 
-	/* List of events which userspace want to recieve */
+	/* List of events which userspace want to receive */
 	struct list_head event_list;
 	spinlock_t event_list_lock;
 };
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index fc53492b6ad..d6733e27af3 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -56,46 +56,52 @@ enum clock_event_nofitiers {
 
 /**
  * struct clock_event_device - clock event device descriptor
- * @name:		ptr to clock event name
- * @features:		features
+ * @event_handler:	Assigned by the framework to be called by the low
+ *			level handler of the event source
+ * @set_next_event:	set next event function
+ * @next_event:		local storage for the next event in oneshot mode
  * @max_delta_ns:	maximum delta value in ns
  * @min_delta_ns:	minimum delta value in ns
  * @mult:		nanosecond to cycles multiplier
  * @shift:		nanoseconds to cycles divisor (power of two)
+ * @mode:		operating mode assigned by the management code
+ * @features:		features
+ * @retries:		number of forced programming retries
+ * @set_mode:		set mode function
+ * @broadcast:		function to broadcast events
+ * @min_delta_ticks:	minimum delta value in ticks stored for reconfiguration
+ * @max_delta_ticks:	maximum delta value in ticks stored for reconfiguration
+ * @name:		ptr to clock event name
  * @rating:		variable to rate clock event devices
  * @irq:		IRQ number (only for non CPU local devices)
  * @cpumask:		cpumask to indicate for which CPUs this device works
- * @set_next_event:	set next event function
- * @set_mode:		set mode function
- * @event_handler:	Assigned by the framework to be called by the low
- *			level handler of the event source
- * @broadcast:		function to broadcast events
  * @list:		list head for the management code
- * @mode:		operating mode assigned by the management code
- * @next_event:		local storage for the next event in oneshot mode
- * @retries:		number of forced programming retries
  */
 struct clock_event_device {
-	const char		*name;
-	unsigned int		features;
+	void			(*event_handler)(struct clock_event_device *);
+	int			(*set_next_event)(unsigned long evt,
+						  struct clock_event_device *);
+	ktime_t			next_event;
 	u64			max_delta_ns;
 	u64			min_delta_ns;
 	u32			mult;
 	u32			shift;
+	enum clock_event_mode	mode;
+	unsigned int		features;
+	unsigned long		retries;
+
+	void			(*broadcast)(const struct cpumask *mask);
+	void			(*set_mode)(enum clock_event_mode mode,
+					    struct clock_event_device *);
+	unsigned long		min_delta_ticks;
+	unsigned long		max_delta_ticks;
+
+	const char		*name;
 	int			rating;
 	int			irq;
 	const struct cpumask	*cpumask;
-	int			(*set_next_event)(unsigned long evt,
-						  struct clock_event_device *);
-	void			(*set_mode)(enum clock_event_mode mode,
-					    struct clock_event_device *);
-	void			(*event_handler)(struct clock_event_device *);
-	void			(*broadcast)(const struct cpumask *mask);
 	struct list_head	list;
-	enum clock_event_mode	mode;
-	ktime_t			next_event;
-	unsigned long		retries;
-};
+} ____cacheline_aligned;
 
 /*
  * Calculate a multiplication factor for scaled math, which is used to convert
@@ -122,6 +128,12 @@ extern u64 clockevent_delta2ns(unsigned long latch,
 			       struct clock_event_device *evt);
 extern void clockevents_register_device(struct clock_event_device *dev);
 
+extern void clockevents_config_and_register(struct clock_event_device *dev,
+					    u32 freq, unsigned long min_delta,
+					    unsigned long max_delta);
+
+extern int clockevents_update_freq(struct clock_event_device *ce, u32 freq);
+
 extern void clockevents_exchange_device(struct clock_event_device *old,
 					struct clock_event_device *new);
 extern void clockevents_set_mode(struct clock_event_device *dev,
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c37b21ad5a3..c918fbd33ee 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -159,42 +159,38 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
  */
 struct clocksource {
 	/*
-	 * First part of structure is read mostly
+	 * Hotpath data, fits in a single cache line when the
+	 * clocksource itself is cacheline aligned.
 	 */
-	char *name;
-	struct list_head list;
-	int rating;
 	cycle_t (*read)(struct clocksource *cs);
-	int (*enable)(struct clocksource *cs);
-	void (*disable)(struct clocksource *cs);
+	cycle_t cycle_last;
 	cycle_t mask;
 	u32 mult;
 	u32 shift;
 	u64 max_idle_ns;
-	unsigned long flags;
-	cycle_t (*vread)(void);
-	void (*suspend)(struct clocksource *cs);
-	void (*resume)(struct clocksource *cs);
+
 #ifdef CONFIG_IA64
 	void *fsys_mmio;        /* used by fsyscall asm code */
 #define CLKSRC_FSYS_MMIO_SET(mmio, addr)      ((mmio) = (addr))
 #else
 #define CLKSRC_FSYS_MMIO_SET(mmio, addr)      do { } while (0)
 #endif
-
-	/*
-	 * Second part is written at each timer interrupt
-	 * Keep it in a different cache line to dirty no
-	 * more than one cache line.
-	 */
-	cycle_t cycle_last ____cacheline_aligned_in_smp;
+	const char *name;
+	struct list_head list;
+	int rating;
+	cycle_t (*vread)(void);
+	int (*enable)(struct clocksource *cs);
+	void (*disable)(struct clocksource *cs);
+	unsigned long flags;
+	void (*suspend)(struct clocksource *cs);
+	void (*resume)(struct clocksource *cs);
 
 #ifdef CONFIG_CLOCKSOURCE_WATCHDOG
 	/* Watchdog related data, used by the framework */
 	struct list_head wd_list;
 	cycle_t wd_last;
 #endif
-};
+} ____cacheline_aligned;
 
 /*
  * Clock source flags bits::
@@ -341,4 +337,6 @@ static inline void update_vsyscall_tz(void)
 
 extern void timekeeping_notify(struct clocksource *clock);
 
+extern int clocksource_i8253_init(void);
+
 #endif /* _LINUX_CLOCKSOURCE_H */
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
index 72bfefdbd76..3c4aac40617 100644
--- a/include/linux/cm4000_cs.h
+++ b/include/linux/cm4000_cs.h
@@ -20,7 +20,7 @@ typedef struct atreq {
 } atreq_t;
 
 
-/* what is particularly stupid in the original driver is the arch-dependant
+/* what is particularly stupid in the original driver is the arch-dependent
  * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
  * will lay out the structure members differently than the 64bit kernel.
  *
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index ddb7a97c78c..645778ad899 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -218,7 +218,7 @@ static ssize_t _item##_attr_store(struct config_item *item,		\
  * group children.  default_groups may coexist alongsize make_group() or
  * make_item(), but if the group wishes to have only default_groups
  * children (disallowing mkdir(2)), it need not provide either function.
- * If the group has commit(), it supports pending and commited (active)
+ * If the group has commit(), it supports pending and committed (active)
  * items.
  */
 struct configfs_item_operations {
diff --git a/include/linux/cper.h b/include/linux/cper.h
index 372a25839fd..c2304949653 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -310,7 +310,7 @@ struct cper_sec_proc_ia {
 	__u8	cpuid[48];
 };
 
-/* IA32/X64 Processor Error Infomation Structure */
+/* IA32/X64 Processor Error Information Structure */
 struct cper_ia_err_info {
 	uuid_le	err_type;
 	__u64	validation_bits;
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 9343dd3de85..11be48e0d16 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2001 Russell King
  *            (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
- *            
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -56,9 +56,9 @@ static inline int cpufreq_unregister_notifier(struct notifier_block *nb,
 #define CPUFREQ_POLICY_POWERSAVE	(1)
 #define CPUFREQ_POLICY_PERFORMANCE	(2)
 
-/* Frequency values here are CPU kHz so that hardware which doesn't run 
- * with some frequencies can complain without having to guess what per 
- * cent / per mille means. 
+/* Frequency values here are CPU kHz so that hardware which doesn't run
+ * with some frequencies can complain without having to guess what per
+ * cent / per mille means.
  * Maximum transition latency is in nanoseconds - if it's unknown,
  * CPUFREQ_ETERNAL shall be used.
  */
@@ -72,13 +72,15 @@ extern struct kobject *cpufreq_global_kobject;
 struct cpufreq_cpuinfo {
 	unsigned int		max_freq;
 	unsigned int		min_freq;
-	unsigned int		transition_latency; /* in 10^(-9) s = nanoseconds */
+
+	/* in 10^(-9) s = nanoseconds */
+	unsigned int		transition_latency;
 };
 
 struct cpufreq_real_policy {
 	unsigned int		min;    /* in kHz */
 	unsigned int		max;    /* in kHz */
-        unsigned int		policy; /* see above */
+	unsigned int		policy; /* see above */
 	struct cpufreq_governor	*governor; /* see below */
 };
 
@@ -94,7 +96,7 @@ struct cpufreq_policy {
 	unsigned int		max;    /* in kHz */
 	unsigned int		cur;    /* in kHz, only needed if cpufreq
 					 * governors are used */
-        unsigned int		policy; /* see above */
+	unsigned int		policy; /* see above */
 	struct cpufreq_governor	*governor; /* see below */
 
 	struct work_struct	update; /* if update_policy() needs to be
@@ -167,11 +169,11 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div, u_int mu
 
 struct cpufreq_governor {
 	char	name[CPUFREQ_NAME_LEN];
-	int 	(*governor)	(struct cpufreq_policy *policy,
+	int	(*governor)	(struct cpufreq_policy *policy,
 				 unsigned int event);
 	ssize_t	(*show_setspeed)	(struct cpufreq_policy *policy,
 					 char *buf);
-	int 	(*store_setspeed)	(struct cpufreq_policy *policy,
+	int	(*store_setspeed)	(struct cpufreq_policy *policy,
 					 unsigned int freq);
 	unsigned int max_transition_latency; /* HW must be able to switch to
 			next freq faster than this value in nano secs or we
@@ -180,7 +182,8 @@ struct cpufreq_governor {
 	struct module		*owner;
 };
 
-/* pass a target to the cpufreq driver 
+/*
+ * Pass a target to the cpufreq driver.
  */
 extern int cpufreq_driver_target(struct cpufreq_policy *policy,
 				 unsigned int target_freq,
@@ -237,9 +240,9 @@ struct cpufreq_driver {
 
 /* flags */
 
-#define CPUFREQ_STICKY		0x01	/* the driver isn't removed even if 
+#define CPUFREQ_STICKY		0x01	/* the driver isn't removed even if
 					 * all ->init() calls failed */
-#define CPUFREQ_CONST_LOOPS 	0x02	/* loops_per_jiffy or other kernel
+#define CPUFREQ_CONST_LOOPS	0x02	/* loops_per_jiffy or other kernel
 					 * "constants" aren't affected by
 					 * frequency transitions */
 #define CPUFREQ_PM_NO_WARN	0x04	/* don't warn on suspend/resume speed
@@ -252,7 +255,7 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
 void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state);
 
 
-static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max) 
+static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max)
 {
 	if (policy->min < min)
 		policy->min = min;
@@ -386,34 +389,15 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 /* the following 3 funtions are for cpufreq core use only */
 struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu);
 struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu);
-void   cpufreq_cpu_put (struct cpufreq_policy *data);
+void   cpufreq_cpu_put(struct cpufreq_policy *data);
 
 /* the following are really really optional */
 extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
 
-void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, 
+void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
 				      unsigned int cpu);
 
 void cpufreq_frequency_table_put_attr(unsigned int cpu);
 
 
-/*********************************************************************
- *                     UNIFIED DEBUG HELPERS                         *
- *********************************************************************/
-
-#define CPUFREQ_DEBUG_CORE	1
-#define CPUFREQ_DEBUG_DRIVER	2
-#define CPUFREQ_DEBUG_GOVERNOR	4
-
-#ifdef CONFIG_CPU_FREQ_DEBUG
-
-extern void cpufreq_debug_printk(unsigned int type, const char *prefix, 
-				 const char *fmt, ...);
-
-#else
-
-#define cpufreq_debug_printk(msg...) do { } while(0)
-
-#endif /* CONFIG_CPU_FREQ_DEBUG */
-
 #endif /* _LINUX_CPUFREQ_H */
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 9aeeb0ba200..be16b61283c 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -146,6 +146,7 @@ struct cred {
 	void		*security;	/* subjective LSM security */
 #endif
 	struct user_struct *user;	/* real user ID subscription */
+	struct user_namespace *user_ns; /* cached user->user_ns */
 	struct group_info *group_info;	/* supplementary groups for euid/fsgid */
 	struct rcu_head	rcu;		/* RCU deletion hook */
 };
@@ -354,10 +355,15 @@ static inline void put_cred(const struct cred *_cred)
 #define current_fsgid() 	(current_cred_xxx(fsgid))
 #define current_cap()		(current_cred_xxx(cap_effective))
 #define current_user()		(current_cred_xxx(user))
-#define _current_user_ns()	(current_cred_xxx(user)->user_ns)
 #define current_security()	(current_cred_xxx(security))
 
-extern struct user_namespace *current_user_ns(void);
+#ifdef CONFIG_USER_NS
+#define current_user_ns() (current_cred_xxx(user_ns))
+#else
+extern struct user_namespace init_user_ns;
+#define current_user_ns() (&init_user_ns)
+#endif
+
 
 #define current_uid_gid(_uid, _gid)		\
 do {						\
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index f2afed4fa94..19d90a55541 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -197,7 +197,7 @@ struct dentry_operations {
       * typically using d_splice_alias. */
 
 #define DCACHE_REFERENCED	0x0008  /* Recently used, don't discard. */
-#define DCACHE_UNHASHED		0x0010	
+#define DCACHE_RCUACCESS	0x0010	/* Entry has ever been RCU-visible */
 #define DCACHE_INOTIFY_PARENT_WATCHED 0x0020
      /* Parent inode is watched by inotify */
 
@@ -384,7 +384,7 @@ extern struct dentry *dget_parent(struct dentry *dentry);
  
 static inline int d_unhashed(struct dentry *dentry)
 {
-	return (dentry->d_flags & DCACHE_UNHASHED);
+	return hlist_bl_unhashed(&dentry->d_hash);
 }
 
 static inline int d_unlinked(struct dentry *dentry)
diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h
index 4cb72b920c7..7925bf0ee83 100644
--- a/include/linux/decompress/mm.h
+++ b/include/linux/decompress/mm.h
@@ -16,7 +16,7 @@
 
 /*
  * Some architectures want to ensure there is no local data in their
- * pre-boot environment, so that data can arbitarily relocated (via
+ * pre-boot environment, so that data can arbitrarily relocated (via
  * GOT references).  This is achieved by defining STATIC_RW_DATA to
  * be null.
  */
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index e2768834f39..32a4423710f 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -197,7 +197,6 @@ struct dm_target {
 struct dm_target_callbacks {
 	struct list_head list;
 	int (*congested_fn) (struct dm_target_callbacks *, int);
-	void (*unplug_fn)(struct dm_target_callbacks *);
 };
 
 int dm_register_target(struct target_type *t);
diff --git a/include/linux/device.h b/include/linux/device.h
index ab8dfc09570..c66111affca 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -47,6 +47,38 @@ extern int __must_check bus_create_file(struct bus_type *,
 					struct bus_attribute *);
 extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
 
+/**
+ * struct bus_type - The bus type of the device
+ *
+ * @name:	The name of the bus.
+ * @bus_attrs:	Default attributes of the bus.
+ * @dev_attrs:	Default attributes of the devices on the bus.
+ * @drv_attrs:	Default attributes of the device drivers on the bus.
+ * @match:	Called, perhaps multiple times, whenever a new device or driver
+ *		is added for this bus. It should return a nonzero value if the
+ *		given device can be handled by the given driver.
+ * @uevent:	Called when a device is added, removed, or a few other things
+ *		that generate uevents to add the environment variables.
+ * @probe:	Called when a new device or driver add to this bus, and callback
+ *		the specific driver's probe to initial the matched device.
+ * @remove:	Called when a device removed from this bus.
+ * @shutdown:	Called at shut-down time to quiesce the device.
+ * @suspend:	Called when a device on this bus wants to go to sleep mode.
+ * @resume:	Called to bring a device on this bus out of sleep mode.
+ * @pm:		Power management operations of this bus, callback the specific
+ *		device driver's pm-ops.
+ * @p:		The private data of the driver core, only the driver core can
+ *		touch this.
+ *
+ * A bus is a channel between the processor and one or more devices. For the
+ * purposes of the device model, all devices are connected via a bus, even if
+ * it is an internal, virtual, "platform" bus. Buses can plug into each other.
+ * A USB controller is usually a PCI device, for example. The device model
+ * represents the actual connections between buses and the devices they control.
+ * A bus is represented by the bus_type structure. It contains the name, the
+ * default attributes, the bus' methods, PM operations, and the driver core's
+ * private data.
+ */
 struct bus_type {
 	const char		*name;
 	struct bus_attribute	*bus_attrs;
@@ -119,6 +151,37 @@ extern int bus_unregister_notifier(struct bus_type *bus,
 extern struct kset *bus_get_kset(struct bus_type *bus);
 extern struct klist *bus_get_device_klist(struct bus_type *bus);
 
+/**
+ * struct device_driver - The basic device driver structure
+ * @name:	Name of the device driver.
+ * @bus:	The bus which the device of this driver belongs to.
+ * @owner:	The module owner.
+ * @mod_name:	Used for built-in modules.
+ * @suppress_bind_attrs: Disables bind/unbind via sysfs.
+ * @of_match_table: The open firmware table.
+ * @probe:	Called to query the existence of a specific device,
+ *		whether this driver can work with it, and bind the driver
+ *		to a specific device.
+ * @remove:	Called when the device is removed from the system to
+ *		unbind a device from this driver.
+ * @shutdown:	Called at shut-down time to quiesce the device.
+ * @suspend:	Called to put the device to sleep mode. Usually to a
+ *		low power state.
+ * @resume:	Called to bring a device from sleep mode.
+ * @groups:	Default attributes that get created by the driver core
+ *		automatically.
+ * @pm:		Power management operations of the device which matched
+ *		this driver.
+ * @p:		Driver core's private data, no one other than the driver
+ *		core can touch this.
+ *
+ * The device driver-model tracks all of the drivers known to the system.
+ * The main reason for this tracking is to enable the driver core to match
+ * up drivers with new devices. Once drivers are known objects within the
+ * system, however, a number of other things become possible. Device drivers
+ * can export information and configuration variables that are independent
+ * of any specific device.
+ */
 struct device_driver {
 	const char		*name;
 	struct bus_type		*bus;
@@ -185,8 +248,34 @@ struct device *driver_find_device(struct device_driver *drv,
 				  struct device *start, void *data,
 				  int (*match)(struct device *dev, void *data));
 
-/*
- * device classes
+/**
+ * struct class - device classes
+ * @name:	Name of the class.
+ * @owner:	The module owner.
+ * @class_attrs: Default attributes of this class.
+ * @dev_attrs:	Default attributes of the devices belong to the class.
+ * @dev_bin_attrs: Default binary attributes of the devices belong to the class.
+ * @dev_kobj:	The kobject that represents this class and links it into the hierarchy.
+ * @dev_uevent:	Called when a device is added, removed from this class, or a
+ *		few other things that generate uevents to add the environment
+ *		variables.
+ * @devnode:	Callback to provide the devtmpfs.
+ * @class_release: Called to release this class.
+ * @dev_release: Called to release the device.
+ * @suspend:	Used to put the device to sleep mode, usually to a low power
+ *		state.
+ * @resume:	Used to bring the device from the sleep mode.
+ * @ns_type:	Callbacks so sysfs can detemine namespaces.
+ * @namespace:	Namespace of the device belongs to this class.
+ * @pm:		The default device power management operations of this class.
+ * @p:		The private data of the driver core, no one other than the
+ *		driver core can touch this.
+ *
+ * A class is a higher-level view of a device that abstracts out low-level
+ * implementation details. Drivers may see a SCSI disk or an ATA disk, but,
+ * at the class level, they are all simply disks. Classes allow user space
+ * to work with devices based on what they do, rather than how they are
+ * connected or how they work.
  */
 struct class {
 	const char		*name;
@@ -401,6 +490,65 @@ struct device_dma_parameters {
 	unsigned long segment_boundary_mask;
 };
 
+/**
+ * struct device - The basic device structure
+ * @parent:	The device's "parent" device, the device to which it is attached.
+ * 		In most cases, a parent device is some sort of bus or host
+ * 		controller. If parent is NULL, the device, is a top-level device,
+ * 		which is not usually what you want.
+ * @p:		Holds the private data of the driver core portions of the device.
+ * 		See the comment of the struct device_private for detail.
+ * @kobj:	A top-level, abstract class from which other classes are derived.
+ * @init_name:	Initial name of the device.
+ * @type:	The type of device.
+ * 		This identifies the device type and carries type-specific
+ * 		information.
+ * @mutex:	Mutex to synchronize calls to its driver.
+ * @bus:	Type of bus device is on.
+ * @driver:	Which driver has allocated this
+ * @platform_data: Platform data specific to the device.
+ * 		Example: For devices on custom boards, as typical of embedded
+ * 		and SOC based hardware, Linux often uses platform_data to point
+ * 		to board-specific structures describing devices and how they
+ * 		are wired.  That can include what ports are available, chip
+ * 		variants, which GPIO pins act in what additional roles, and so
+ * 		on.  This shrinks the "Board Support Packages" (BSPs) and
+ * 		minimizes board-specific #ifdefs in drivers.
+ * @power:	For device power management.
+ * 		See Documentation/power/devices.txt for details.
+ * @pwr_domain:	Provide callbacks that are executed during system suspend,
+ * 		hibernation, system resume and during runtime PM transitions
+ * 		along with subsystem-level and driver-level callbacks.
+ * @numa_node:	NUMA node this device is close to.
+ * @dma_mask:	Dma mask (if dma'ble device).
+ * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
+ * 		hardware supports 64-bit addresses for consistent allocations
+ * 		such descriptors.
+ * @dma_parms:	A low level driver may set these to teach IOMMU code about
+ * 		segment limitations.
+ * @dma_pools:	Dma pools (if dma'ble device).
+ * @dma_mem:	Internal for coherent mem override.
+ * @archdata:	For arch-specific additions.
+ * @of_node:	Associated device tree node.
+ * @of_match:	Matching of_device_id from driver.
+ * @devt:	For creating the sysfs "dev".
+ * @devres_lock: Spinlock to protect the resource of the device.
+ * @devres_head: The resources list of the device.
+ * @knode_class: The node used to add the device to the class list.
+ * @class:	The class of the device.
+ * @groups:	Optional attribute groups.
+ * @release:	Callback to free the device after all references have
+ * 		gone away. This should be set by the allocator of the
+ * 		device (i.e. the bus driver that discovered the device).
+ *
+ * At the lowest level, every device in a Linux system is represented by an
+ * instance of struct device. The device structure contains the information
+ * that the device model core needs to model the system. Most subsystems,
+ * however, track additional information about the devices they host. As a
+ * result, it is rare for devices to be represented by bare device structures;
+ * instead, that structure, like kobject structures, is usually embedded within
+ * a higher-level representation of the device.
+ */
 struct device {
 	struct device		*parent;
 
@@ -408,7 +556,7 @@ struct device {
 
 	struct kobject kobj;
 	const char		*init_name; /* initial name of the device */
-	struct device_type	*type;
+	const struct device_type *type;
 
 	struct mutex		mutex;	/* mutex to synchronize calls to
 					 * its driver.
@@ -442,7 +590,6 @@ struct device {
 	struct dev_archdata	archdata;
 
 	struct device_node	*of_node; /* associated device tree node */
-	const struct of_device_id *of_match; /* matching of_device_id from driver */
 
 	dev_t			devt;	/* dev_t, creates the sysfs "dev" */
 
@@ -557,7 +704,7 @@ extern int device_move(struct device *dev, struct device *new_parent,
 extern const char *device_get_devnode(struct device *dev,
 				      mode_t *mode, const char **tmp);
 extern void *dev_get_drvdata(const struct device *dev);
-extern void dev_set_drvdata(struct device *dev, void *data);
+extern int dev_set_drvdata(struct device *dev, void *data);
 
 /*
  * Root device objects for grouping under /sys/devices
@@ -611,7 +758,7 @@ extern int (*platform_notify)(struct device *dev);
 extern int (*platform_notify_remove)(struct device *dev);
 
 
-/**
+/*
  * get_device - atomically increment the reference count for the device.
  *
  */
@@ -633,13 +780,6 @@ static inline int devtmpfs_mount(const char *mountpoint) { return 0; }
 /* drivers/base/power/shutdown.c */
 extern void device_shutdown(void);
 
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-/* drivers/base/sys.c */
-extern void sysdev_shutdown(void);
-#else
-static inline void sysdev_shutdown(void) { }
-#endif
-
 /* debugging and troubleshooting/diagnostic helpers. */
 extern const char *dev_driver_string(const struct device *dev);
 
@@ -742,13 +882,17 @@ do {						     \
 #endif
 
 /*
- * dev_WARN() acts like dev_printk(), but with the key difference
+ * dev_WARN*() acts like dev_printk(), but with the key difference
  * of using a WARN/WARN_ON to get the message out, including the
  * file/line information and a backtrace.
  */
 #define dev_WARN(dev, format, arg...) \
 	WARN(1, "Device: %s\n" format, dev_driver_string(dev), ## arg);
 
+#define dev_WARN_ONCE(dev, condition, format, arg...) \
+	WARN_ONCE(condition, "Device %s\n" format, \
+			dev_driver_string(dev), ## arg)
+
 /* Create alias, so I can be autoloaded. */
 #define MODULE_ALIAS_CHARDEV(major,minor) \
 	MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor))
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 9bebd7f16ef..eee7addec28 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -434,7 +434,7 @@ struct dma_tx_state {
  *	zero or error code
  * @device_tx_status: poll for transaction completion, the optional
  *	txstate parameter can be supplied with a pointer to get a
- *	struct with auxilary transfer status information, otherwise the call
+ *	struct with auxiliary transfer status information, otherwise the call
  *	will just return a simple status code
  * @device_issue_pending: push pending transactions to hardware
  */
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index d18d673ebc7..cec467f5d67 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -36,7 +36,7 @@
 #include <sys/wait.h>
 #include <limits.h>
 
-/* Altough the Linux source code makes a difference between
+/* Although the Linux source code makes a difference between
    generic endianness and the bitfields' endianness, there is no
    architecture as of Linux-2.6.24-rc4 where the bitfileds' endianness
    does not match the generic endianness. */
@@ -184,7 +184,7 @@ enum drbd_conns {
 	/* These temporal states are all used on the way
 	 * from >= C_CONNECTED to Unconnected.
 	 * The 'disconnect reason' states
-	 * I do not allow to change beween them. */
+	 * I do not allow to change between them. */
 	C_TIMEOUT,
 	C_BROKEN_PIPE,
 	C_NETWORK_FAILURE,
diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h
index bb264a5732d..246f576c981 100644
--- a/include/linux/drbd_limits.h
+++ b/include/linux/drbd_limits.h
@@ -43,7 +43,7 @@
 
 /* net { */
   /* timeout, unit centi seconds
-   * more than one minute timeout is not usefull */
+   * more than one minute timeout is not useful */
 #define DRBD_TIMEOUT_MIN 1
 #define DRBD_TIMEOUT_MAX 600
 #define DRBD_TIMEOUT_DEF 60       /* 6 seconds */
@@ -68,7 +68,7 @@
 #define DRBD_MAX_EPOCH_SIZE_MAX 20000
 #define DRBD_MAX_EPOCH_SIZE_DEF 2048
 
-  /* I don't think that a tcp send buffer of more than 10M is usefull */
+  /* I don't think that a tcp send buffer of more than 10M is useful */
 #define DRBD_SNDBUF_SIZE_MIN  0
 #define DRBD_SNDBUF_SIZE_MAX  (10<<20)
 #define DRBD_SNDBUF_SIZE_DEF  0
@@ -101,7 +101,7 @@
 #define DRBD_RATE_MAX (4 << 20)
 #define DRBD_RATE_DEF 250  /* kb/second */
 
-  /* less than 7 would hit performance unneccessarily.
+  /* less than 7 would hit performance unnecessarily.
    * 3833 is the largest prime that still does fit
    * into 64 sectors of activity log */
 #define DRBD_AL_EXTENTS_MIN  7
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index 0c9653f11c1..e747ecd48e1 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -1,8 +1,6 @@
 #ifndef _DYNAMIC_DEBUG_H
 #define _DYNAMIC_DEBUG_H
 
-#include <linux/jump_label.h>
-
 /* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which
  * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They
  * use independent hash functions, to reduce the chance of false positives.
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index d93efcc4457..21a8ebf2dc3 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -101,7 +101,6 @@ extern void elv_dispatch_sort(struct request_queue *, struct request *);
 extern void elv_dispatch_add_tail(struct request_queue *, struct request *);
 extern void elv_add_request(struct request_queue *, struct request *, int);
 extern void __elv_add_request(struct request_queue *, struct request *, int);
-extern void elv_insert(struct request_queue *, struct request *, int);
 extern int elv_merge(struct request_queue *, struct request **, struct bio *);
 extern int elv_try_merge(struct request *, struct bio *);
 extern void elv_merge_requests(struct request_queue *, struct request *,
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c8fcbdd2b0e..c6a850ab2ec 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -24,7 +24,10 @@ struct ethtool_cmd {
 	__u32	cmd;
 	__u32	supported;	/* Features this interface supports */
 	__u32	advertising;	/* Features this interface advertises */
-	__u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */
+	__u16	speed;	        /* The forced speed (lower bits) in
+				 * Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
 	__u8	duplex;		/* Duplex, half or full */
 	__u8	port;		/* Which connector port */
 	__u8	phy_address;
@@ -33,7 +36,10 @@ struct ethtool_cmd {
 	__u8	mdio_support;
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u16	speed_hi;
+	__u16	speed_hi;       /* The forced speed (upper
+				 * bits) in Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
 	__u8	eth_tp_mdix;
 	__u8	reserved2;
 	__u32	lp_advertising;	/* Features the link partner advertises */
@@ -41,14 +47,14 @@ struct ethtool_cmd {
 };
 
 static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
-						__u32 speed)
+					 __u32 speed)
 {
 
 	ep->speed = (__u16)speed;
 	ep->speed_hi = (__u16)(speed >> 16);
 }
 
-static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
 {
 	return (ep->speed_hi << 16) | ep->speed;
 }
@@ -229,6 +235,34 @@ struct ethtool_ringparam {
 	__u32	tx_pending;
 };
 
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ *	support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+	__u32	cmd;
+	__u32	max_rx;
+	__u32	max_tx;
+	__u32	max_other;
+	__u32	max_combined;
+	__u32	rx_count;
+	__u32	tx_count;
+	__u32	other_count;
+	__u32	combined_count;
+};
+
 /* for configuring link flow control parameters */
 struct ethtool_pauseparam {
 	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
@@ -380,27 +414,42 @@ struct ethtool_usrip4_spec {
 	__u8    proto;
 };
 
+union ethtool_flow_union {
+	struct ethtool_tcpip4_spec		tcp_ip4_spec;
+	struct ethtool_tcpip4_spec		udp_ip4_spec;
+	struct ethtool_tcpip4_spec		sctp_ip4_spec;
+	struct ethtool_ah_espip4_spec		ah_ip4_spec;
+	struct ethtool_ah_espip4_spec		esp_ip4_spec;
+	struct ethtool_usrip4_spec		usr_ip4_spec;
+	struct ethhdr				ether_spec;
+	__u8					hdata[60];
+};
+
+struct ethtool_flow_ext {
+	__be16	vlan_etype;
+	__be16	vlan_tci;
+	__be32	data[2];
+};
+
 /**
  * struct ethtool_rx_flow_spec - specification for RX flow filter
  * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
  * @h_u: Flow fields to match (dependent on @flow_type)
- * @m_u: Masks for flow field bits to be ignored
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ *	Note, all additional fields must be ignored unless @flow_type
+ *	includes the %FLOW_EXT flag.
  * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
  *	if packets should be discarded
  * @location: Index of filter in hardware table
  */
 struct ethtool_rx_flow_spec {
 	__u32		flow_type;
-	union {
-		struct ethtool_tcpip4_spec		tcp_ip4_spec;
-		struct ethtool_tcpip4_spec		udp_ip4_spec;
-		struct ethtool_tcpip4_spec		sctp_ip4_spec;
-		struct ethtool_ah_espip4_spec		ah_ip4_spec;
-		struct ethtool_ah_espip4_spec		esp_ip4_spec;
-		struct ethtool_usrip4_spec		usr_ip4_spec;
-		struct ethhdr				ether_spec;
-		__u8					hdata[72];
-	} h_u, m_u;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
 	__u64		ring_cookie;
 	__u32		location;
 };
@@ -458,16 +507,10 @@ struct ethtool_rxnfc {
 
 struct compat_ethtool_rx_flow_spec {
 	u32		flow_type;
-	union {
-		struct ethtool_tcpip4_spec		tcp_ip4_spec;
-		struct ethtool_tcpip4_spec		udp_ip4_spec;
-		struct ethtool_tcpip4_spec		sctp_ip4_spec;
-		struct ethtool_ah_espip4_spec		ah_ip4_spec;
-		struct ethtool_ah_espip4_spec		esp_ip4_spec;
-		struct ethtool_usrip4_spec		usr_ip4_spec;
-		struct ethhdr				ether_spec;
-		u8					hdata[72];
-	} h_u, m_u;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
 	compat_u64	ring_cookie;
 	u32		location;
 };
@@ -558,6 +601,26 @@ struct ethtool_flash {
 	char	data[ETHTOOL_FLASH_MAX_FILENAME];
 };
 
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * 	%ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ * 	  get and filled in by ethtool for set operation
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * 	 for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+struct ethtool_dump {
+	__u32	cmd;
+	__u32	version;
+	__u32	flag;
+	__u32	len;
+	__u8	data[0];
+};
+
 /* for returning and changing feature sets */
 
 /**
@@ -614,7 +677,7 @@ struct ethtool_sfeatures {
  * values of corresponding bits in features[].requested. Bits in .requested
  * not set in .valid or not changeable are ignored.
  *
- * Returns %EINVAL when .valid contains undefined or never-changable bits
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
  * or size is not equal to required number of features words (32-bit blocks).
  * Returns >= 0 if request was completed; bits set in the value mean:
  *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
@@ -663,6 +726,22 @@ struct ethtool_rx_ntuple_list {
 	unsigned int		count;
 };
 
+/**
+ * enum ethtool_phys_id_state - indicator state for physical identification
+ * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
+ * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
+ * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ */
+enum ethtool_phys_id_state {
+	ETHTOOL_ID_INACTIVE,
+	ETHTOOL_ID_ACTIVE,
+	ETHTOOL_ID_ON,
+	ETHTOOL_ID_OFF
+};
+
 struct net_device;
 
 /* Some generic methods drivers may use in their ethtool_ops */
@@ -683,63 +762,131 @@ void ethtool_ntuple_flush(struct net_device *dev);
 bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
 
 /**
- * &ethtool_ops - Alter and report network device settings
- * get_settings: Get device-specific settings
- * set_settings: Set device-specific settings
- * get_drvinfo: Report driver information
- * get_regs: Get device registers
- * get_wol: Report whether Wake-on-Lan is enabled
- * set_wol: Turn Wake-on-Lan on or off
- * get_msglevel: Report driver message level
- * set_msglevel: Set driver message level
- * nway_reset: Restart autonegotiation
- * get_link: Get link status
- * get_eeprom: Read data from the device EEPROM
- * set_eeprom: Write data to the device EEPROM
- * get_coalesce: Get interrupt coalescing parameters
- * set_coalesce: Set interrupt coalescing parameters
- * get_ringparam: Report ring sizes
- * set_ringparam: Set ring sizes
- * get_pauseparam: Report pause parameters
- * set_pauseparam: Set pause parameters
- * get_rx_csum: Report whether receive checksums are turned on or off
- * set_rx_csum: Turn receive checksum on or off
- * get_tx_csum: Report whether transmit checksums are turned on or off
- * set_tx_csum: Turn transmit checksums on or off
- * get_sg: Report whether scatter-gather is enabled
- * set_sg: Turn scatter-gather on or off
- * get_tso: Report whether TCP segmentation offload is enabled
- * set_tso: Turn TCP segmentation offload on or off
- * get_ufo: Report whether UDP fragmentation offload is enabled
- * set_ufo: Turn UDP fragmentation offload on or off
- * self_test: Run specified self-tests
- * get_strings: Return a set of strings that describe the requested objects
- * phys_id: Identify the device
- * get_stats: Return statistics about the device
- * get_flags: get 32-bit flags bitmap
- * set_flags: set 32-bit flags bitmap
- *
- * Description:
- *
- * get_settings:
- *	@get_settings is passed an &ethtool_cmd to fill in.  It returns
- *	an negative errno or zero.
- *
- * set_settings:
- *	@set_settings is passed an &ethtool_cmd and should attempt to set
- *	all the settings this device supports.  It may return an error value
- *	if something goes wrong (otherwise 0).
- *
- * get_eeprom:
+ * struct ethtool_ops - optional netdev operations
+ * @get_settings: Get various device settings including Ethernet link
+ *	settings. The @cmd parameter is expected to have been cleared
+ *	before get_settings is called. Returns a negative error code or
+ *	zero.
+ * @set_settings: Set various device settings including Ethernet link
+ *	settings.  Returns a negative error code or zero.
+ * @get_drvinfo: Report driver/device information.  Should only set the
+ *	@driver, @version, @fw_version and @bus_info fields.  If not
+ *	implemented, the @driver and @bus_info fields will be filled in
+ *	according to the netdev's parent device.
+ * @get_regs_len: Get buffer length required for @get_regs
+ * @get_regs: Get device registers
+ * @get_wol: Report whether Wake-on-Lan is enabled
+ * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
+ *	or zero.
+ * @get_msglevel: Report driver message level.  This should be the value
+ *	of the @msg_enable field used by netif logging functions.
+ * @set_msglevel: Set driver message level
+ * @nway_reset: Restart autonegotiation.  Returns a negative error code
+ *	or zero.
+ * @get_link: Report whether physical link is up.  Will only be called if
+ *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
+ *	which uses netif_carrier_ok().
+ * @get_eeprom: Read data from the device EEPROM.
  *	Should fill in the magic field.  Don't need to check len for zero
  *	or wraparound.  Fill in the data argument with the eeprom values
  *	from offset to offset + len.  Update len to the amount read.
  *	Returns an error or zero.
- *
- * set_eeprom:
+ * @set_eeprom: Write data to the device EEPROM.
  *	Should validate the magic field.  Don't need to check len for zero
  *	or wraparound.  Update len to the amount written.  Returns an error
  *	or zero.
+ * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @get_ringparam: Report ring sizes
+ * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
+ * @get_pauseparam: Report pause parameters
+ * @set_pauseparam: Set pause parameters.  Returns a negative error code
+ *	or zero.
+ * @get_rx_csum: Deprecated in favour of the netdev feature %NETIF_F_RXCSUM.
+ *	Report whether receive checksums are turned on or off.
+ * @set_rx_csum: Deprecated in favour of generic netdev features.  Turn
+ *	receive checksum on or off.  Returns a negative error code or zero.
+ * @get_tx_csum: Deprecated as redundant. Report whether transmit checksums
+ *	are turned on or off.
+ * @set_tx_csum: Deprecated in favour of generic netdev features.  Turn
+ *	transmit checksums on or off.  Returns a egative error code or zero.
+ * @get_sg: Deprecated as redundant.  Report whether scatter-gather is
+ *	enabled.  
+ * @set_sg: Deprecated in favour of generic netdev features.  Turn
+ *	scatter-gather on or off. Returns a negative error code or zero.
+ * @get_tso: Deprecated as redundant.  Report whether TCP segmentation
+ *	offload is enabled.
+ * @set_tso: Deprecated in favour of generic netdev features.  Turn TCP
+ *	segmentation offload on or off.  Returns a negative error code or zero.
+ * @self_test: Run specified self-tests
+ * @get_strings: Return a set of strings that describe the requested objects
+ * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
+ *	attached to it.  The implementation may update the indicator
+ *	asynchronously or synchronously, but in either case it must return
+ *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
+ *	and must either activate asynchronous updates and return zero, return
+ *	a negative error or return a positive frequency for synchronous
+ *	indication (e.g. 1 for one on/off cycle per second).  If it returns
+ *	a frequency then it will be called again at intervals with the
+ *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
+ *	the indicator accordingly.  Finally, it is called with the argument
+ *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
+ *	negative error code or zero.
+ * @get_ethtool_stats: Return extended statistics about the device.
+ *	This is only useful if the device maintains statistics not
+ *	included in &struct rtnl_link_stats64.
+ * @begin: Function to be called before any other operation.  Returns a
+ *	negative error code or zero.
+ * @complete: Function to be called after any other operation except
+ *	@begin.  Will be called even if the other operation failed.
+ * @get_ufo: Deprecated as redundant.  Report whether UDP fragmentation
+ *	offload is enabled.
+ * @set_ufo: Deprecated in favour of generic netdev features.  Turn UDP
+ *	fragmentation offload on or off.  Returns a negative error code or zero.
+ * @get_flags: Deprecated as redundant.  Report features included in
+ *	&enum ethtool_flags that are enabled.  
+ * @set_flags: Deprecated in favour of generic netdev features.  Turn
+ *	features included in &enum ethtool_flags on or off.  Returns a
+ *	negative error code or zero.
+ * @get_priv_flags: Report driver-specific feature flags.
+ * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
+ *	error code or zero.
+ * @get_sset_count: Get number of strings that @get_strings will write.
+ * @get_rxnfc: Get RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @set_rxnfc: Set RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @flash_device: Write a firmware image to device's flash memory.
+ *	Returns a negative error code or zero.
+ * @reset: Reset (part of) the device, as specified by a bitmask of
+ *	flags from &enum ethtool_reset_flags.  Returns a negative
+ *	error code or zero.
+ * @set_rx_ntuple: Set an RX n-tuple rule.  Returns a negative error code
+ *	or zero.
+ * @get_rx_ntuple: Deprecated.
+ * @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
+ *	Returns a negative error code or zero.
+ * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
+ *	Returns a negative error code or zero.
+ * @get_channels: Get number of channels.
+ * @set_channels: Set number of channels.  Returns a negative error code or
+ *	zero.
+ * @get_dump_flag: Get dump flag indicating current dump length, version,
+ * 		   and flag of the device.
+ * @get_dump_data: Get dump data.
+ * @set_dump: Set dump specific flags to the device.
+ *
+ * All operations are optional (i.e. the function pointer may be set
+ * to %NULL) and callers must take this into account.  Callers must
+ * hold the RTNL, except that for @get_drvinfo the caller may or may
+ * not hold the RTNL.
+ *
+ * See the structures used by these operations for further documentation.
+ *
+ * See &struct net_device and &struct net_device_ops for documentation
+ * of the generic netdev features interface.
  */
 struct ethtool_ops {
 	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
@@ -778,7 +925,7 @@ struct ethtool_ops {
 	int	(*set_tso)(struct net_device *, u32);
 	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
 	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
-	int	(*phys_id)(struct net_device *, u32);
+	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
 	void	(*get_ethtool_stats)(struct net_device *,
 				     struct ethtool_stats *, u64 *);
 	int	(*begin)(struct net_device *);
@@ -802,6 +949,13 @@ struct ethtool_ops {
 				  struct ethtool_rxfh_indir *);
 	int	(*set_rxfh_indir)(struct net_device *,
 				  const struct ethtool_rxfh_indir *);
+	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
+	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
+	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
+	int	(*get_dump_data)(struct net_device *,
+				 struct ethtool_dump *, void *);
+	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
+
 };
 #endif /* __KERNEL__ */
 
@@ -870,6 +1024,11 @@ struct ethtool_ops {
 
 #define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
 #define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
@@ -897,6 +1056,8 @@ struct ethtool_ops {
 #define SUPPORTED_10000baseKX4_Full	(1 << 18)
 #define SUPPORTED_10000baseKR_Full	(1 << 19)
 #define SUPPORTED_10000baseR_FEC	(1 << 20)
+#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
+#define SUPPORTED_20000baseKR2_Full	(1 << 22)
 
 /* Indicates what features are advertised by the interface. */
 #define ADVERTISED_10baseT_Half		(1 << 0)
@@ -920,6 +1081,8 @@ struct ethtool_ops {
 #define ADVERTISED_10000baseKX4_Full	(1 << 18)
 #define ADVERTISED_10000baseKR_Full	(1 << 19)
 #define ADVERTISED_10000baseR_FEC	(1 << 20)
+#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
+#define ADVERTISED_20000baseKR2_Full	(1 << 22)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
@@ -992,6 +1155,8 @@ struct ethtool_ops {
 #define	IPV4_FLOW	0x10	/* hash only */
 #define	IPV6_FLOW	0x11	/* hash only */
 #define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define	FLOW_EXT	0x80000000
 
 /* L3-L4 network traffic flow hash options */
 #define	RXH_L2DA	(1 << 1)
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index f6856a5a1d4..f362733186a 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -1,5 +1,5 @@
 /*
- *  include/linux/eventpoll.h ( Efficent event polling implementation )
+ *  include/linux/eventpoll.h ( Efficient event polling implementation )
  *  Copyright (C) 2001,...,2006	 Davide Libenzi
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index 33a42f24b27..3a4cef5322d 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -120,7 +120,7 @@ struct fid {
  * encode_fh:
  *    @encode_fh should store in the file handle fragment @fh (using at most
  *    @max_len bytes) information that can be used by @decode_fh to recover the
- *    file refered to by the &struct dentry @de.  If the @connectable flag is
+ *    file referred to by the &struct dentry @de.  If the @connectable flag is
  *    set, the encode_fh() should store sufficient information so that a good
  *    attempt can be made to find not only the file but also it's place in the
  *    filesystem.   This typically means storing a reference to de->d_parent in
diff --git a/include/linux/fb.h b/include/linux/fb.h
index b2a36391d2a..6a827487717 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -534,14 +534,14 @@ struct fb_cursor_user {
 #define FB_EVENT_GET_CONSOLE_MAP        0x07
 /*      CONSOLE-SPECIFIC: set console to framebuffer mapping */
 #define FB_EVENT_SET_CONSOLE_MAP        0x08
-/*      A hardware display blank change occured */
+/*      A hardware display blank change occurred */
 #define FB_EVENT_BLANK                  0x09
 /*      Private modelist is to be replaced */
 #define FB_EVENT_NEW_MODELIST           0x0A
 /*	The resolution of the passed in fb_info about to change and
         all vc's should be changed         */
 #define FB_EVENT_MODE_CHANGE_ALL	0x0B
-/*	A software display blank change occured */
+/*	A software display blank change occurred */
 #define FB_EVENT_CONBLANK               0x0C
 /*      Get drawing requirements        */
 #define FB_EVENT_GET_REQ                0x0D
@@ -805,7 +805,7 @@ struct fb_tile_ops {
 /* A driver may set this flag to indicate that it does want a set_par to be
  * called every time when fbcon_switch is executed. The advantage is that with
  * this flag set you can really be sure that set_par is always called before
- * any of the functions dependant on the correct hardware state or altering
+ * any of the functions dependent on the correct hardware state or altering
  * that state, even if you are using some broken X releases. The disadvantage
  * is that it introduces unwanted delays to every console switch if set_par
  * is slow. It is a good idea to try this flag in the drivers initialization
@@ -832,6 +832,7 @@ struct fb_tile_ops {
 #define FBINFO_CAN_FORCE_OUTPUT     0x200000
 
 struct fb_info {
+	atomic_t count;
 	int node;
 	int flags;
 	struct mutex lock;		/* Lock for open/release/ioctl funcs */
@@ -877,7 +878,7 @@ struct fb_info {
 	void *fbcon_par;                /* fbcon use-only private area */
 	/* From here on everything is device dependent */
 	void *par;
-	/* we need the PCI or similiar aperture base/size not
+	/* we need the PCI or similar aperture base/size not
 	   smem_start/size as smem_start may just be an object
 	   allocated inside the aperture so may not actually overlap */
 	struct apertures_struct {
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 45266b75409..4609b85e559 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -135,6 +135,8 @@ struct sk_filter
 {
 	atomic_t		refcnt;
 	unsigned int         	len;	/* Number of filter blocks */
+	unsigned int		(*bpf_func)(const struct sk_buff *skb,
+					    const struct sock_filter *filter);
 	struct rcu_head		rcu;
 	struct sock_filter     	insns[0];
 };
@@ -153,6 +155,80 @@ extern unsigned int sk_run_filter(const struct sk_buff *skb,
 extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
 extern int sk_detach_filter(struct sock *sk);
 extern int sk_chk_filter(struct sock_filter *filter, int flen);
+
+#ifdef CONFIG_BPF_JIT
+extern void bpf_jit_compile(struct sk_filter *fp);
+extern void bpf_jit_free(struct sk_filter *fp);
+#define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns)
+#else
+static inline void bpf_jit_compile(struct sk_filter *fp)
+{
+}
+static inline void bpf_jit_free(struct sk_filter *fp)
+{
+}
+#define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns)
+#endif
+
+enum {
+	BPF_S_RET_K = 1,
+	BPF_S_RET_A,
+	BPF_S_ALU_ADD_K,
+	BPF_S_ALU_ADD_X,
+	BPF_S_ALU_SUB_K,
+	BPF_S_ALU_SUB_X,
+	BPF_S_ALU_MUL_K,
+	BPF_S_ALU_MUL_X,
+	BPF_S_ALU_DIV_X,
+	BPF_S_ALU_AND_K,
+	BPF_S_ALU_AND_X,
+	BPF_S_ALU_OR_K,
+	BPF_S_ALU_OR_X,
+	BPF_S_ALU_LSH_K,
+	BPF_S_ALU_LSH_X,
+	BPF_S_ALU_RSH_K,
+	BPF_S_ALU_RSH_X,
+	BPF_S_ALU_NEG,
+	BPF_S_LD_W_ABS,
+	BPF_S_LD_H_ABS,
+	BPF_S_LD_B_ABS,
+	BPF_S_LD_W_LEN,
+	BPF_S_LD_W_IND,
+	BPF_S_LD_H_IND,
+	BPF_S_LD_B_IND,
+	BPF_S_LD_IMM,
+	BPF_S_LDX_W_LEN,
+	BPF_S_LDX_B_MSH,
+	BPF_S_LDX_IMM,
+	BPF_S_MISC_TAX,
+	BPF_S_MISC_TXA,
+	BPF_S_ALU_DIV_K,
+	BPF_S_LD_MEM,
+	BPF_S_LDX_MEM,
+	BPF_S_ST,
+	BPF_S_STX,
+	BPF_S_JMP_JA,
+	BPF_S_JMP_JEQ_K,
+	BPF_S_JMP_JEQ_X,
+	BPF_S_JMP_JGE_K,
+	BPF_S_JMP_JGE_X,
+	BPF_S_JMP_JGT_K,
+	BPF_S_JMP_JGT_X,
+	BPF_S_JMP_JSET_K,
+	BPF_S_JMP_JSET_X,
+	/* Ancillary data */
+	BPF_S_ANC_PROTOCOL,
+	BPF_S_ANC_PKTTYPE,
+	BPF_S_ANC_IFINDEX,
+	BPF_S_ANC_NLATTR,
+	BPF_S_ANC_NLATTR_NEST,
+	BPF_S_ANC_MARK,
+	BPF_S_ANC_QUEUE,
+	BPF_S_ANC_HATYPE,
+	BPF_S_ANC_RXHASH,
+	BPF_S_ANC_CPU,
+};
+
 #endif /* __KERNEL__ */
 
 #endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
index 59ea406be7f..4ff09889c5c 100644
--- a/include/linux/firewire-cdev.h
+++ b/include/linux/firewire-cdev.h
@@ -900,7 +900,7 @@ struct fw_cdev_get_cycle_timer2 {
 
 /**
  * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
- * @closure:	Passed back to userspace in correponding iso resource events
+ * @closure:	Passed back to userspace in corresponding iso resource events
  * @channels:	Isochronous channels of which one is to be (de)allocated
  * @bandwidth:	Isochronous bandwidth units to be (de)allocated
  * @handle:	Handle to the allocation, written by the kernel (only valid in
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
index 70e4efabe0f..ebeb2f3ad06 100644
--- a/include/linux/flex_array.h
+++ b/include/linux/flex_array.h
@@ -61,7 +61,7 @@ struct flex_array {
 struct flex_array *flex_array_alloc(int element_size, unsigned int total,
 		gfp_t flags);
 int flex_array_prealloc(struct flex_array *fa, unsigned int start,
-		unsigned int end, gfp_t flags);
+		unsigned int nr_elements, gfp_t flags);
 void flex_array_free(struct flex_array *fa);
 void flex_array_free_parts(struct flex_array *fa);
 int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 52f283c1edb..cdf9495df20 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -358,7 +358,6 @@ struct inodes_stat_t {
 #define FS_EXTENT_FL			0x00080000 /* Extents */
 #define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
 #define FS_NOCOW_FL			0x00800000 /* Do not cow file */
-#define FS_COW_FL			0x02000000 /* Cow file */
 #define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
 
 #define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
@@ -465,7 +464,7 @@ struct iattr {
 	struct timespec	ia_ctime;
 
 	/*
-	 * Not an attribute, but an auxilary info for filesystems wanting to
+	 * Not an attribute, but an auxiliary info for filesystems wanting to
 	 * implement an ftruncate() like method.  NOTE: filesystem should
 	 * check for (ia_valid & ATTR_FILE), and not for (ia_file != NULL).
 	 */
@@ -613,6 +612,8 @@ struct address_space_operations {
 	int (*error_remove_page)(struct address_space *, struct page *);
 };
 
+extern const struct address_space_operations empty_aops;
+
 /*
  * pagecache_write_begin/pagecache_write_end must be used by general code
  * to write into the pagecache.
@@ -647,7 +648,7 @@ struct address_space {
 } __attribute__((aligned(sizeof(long))));
 	/*
 	 * On most architectures that alignment is already the case; but
-	 * must be enforced here for CRIS, to let the least signficant bit
+	 * must be enforced here for CRIS, to let the least significant bit
 	 * of struct page's "mapping" pointer be used for PAGE_MAPPING_ANON.
 	 */
 
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
index b8581c09d19..76427e688d1 100644
--- a/include/linux/fscache-cache.h
+++ b/include/linux/fscache-cache.h
@@ -236,7 +236,7 @@ struct fscache_cache_ops {
 	/* unpin an object in the cache */
 	void (*unpin_object)(struct fscache_object *object);
 
-	/* store the updated auxilliary data on an object */
+	/* store the updated auxiliary data on an object */
 	void (*update_object)(struct fscache_object *object);
 
 	/* discard the resources pinned by an object and effect retirement if
diff --git a/include/linux/fscache.h b/include/linux/fscache.h
index ec0dad5ab90..7c4d72f5581 100644
--- a/include/linux/fscache.h
+++ b/include/linux/fscache.h
@@ -102,9 +102,9 @@ struct fscache_cookie_def {
 	 */
 	void (*get_attr)(const void *cookie_netfs_data, uint64_t *size);
 
-	/* get the auxilliary data from netfs data
+	/* get the auxiliary data from netfs data
 	 * - this function can be absent if the index carries no state data
-	 * - should store the auxilliary data in the buffer
+	 * - should store the auxiliary data in the buffer
 	 * - should return the amount of amount stored
 	 * - not permitted to return an error
 	 * - the netfs data from the cookie being used as the source is
@@ -117,7 +117,7 @@ struct fscache_cookie_def {
 	/* consult the netfs about the state of an object
 	 * - this function can be absent if the index carries no state data
 	 * - the netfs data from the cookie being used as the target is
-	 *   presented, as is the auxilliary data
+	 *   presented, as is the auxiliary data
 	 */
 	enum fscache_checkaux (*check_aux)(void *cookie_netfs_data,
 					   const void *data,
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index ca29e03c1fa..9d88e1cb5db 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -29,9 +29,22 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 
 typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
 
+struct ftrace_hash;
+
+enum {
+	FTRACE_OPS_FL_ENABLED		= 1 << 0,
+	FTRACE_OPS_FL_GLOBAL		= 1 << 1,
+	FTRACE_OPS_FL_DYNAMIC		= 1 << 2,
+};
+
 struct ftrace_ops {
-	ftrace_func_t	  func;
-	struct ftrace_ops *next;
+	ftrace_func_t			func;
+	struct ftrace_ops		*next;
+	unsigned long			flags;
+#ifdef CONFIG_DYNAMIC_FTRACE
+	struct ftrace_hash		*notrace_hash;
+	struct ftrace_hash		*filter_hash;
+#endif
 };
 
 extern int function_trace_stop;
@@ -146,14 +159,13 @@ extern void unregister_ftrace_function_probe_all(char *glob);
 extern int ftrace_text_reserved(void *start, void *end);
 
 enum {
-	FTRACE_FL_FREE		= (1 << 0),
-	FTRACE_FL_FAILED	= (1 << 1),
-	FTRACE_FL_FILTER	= (1 << 2),
-	FTRACE_FL_ENABLED	= (1 << 3),
-	FTRACE_FL_NOTRACE	= (1 << 4),
-	FTRACE_FL_CONVERTED	= (1 << 5),
+	FTRACE_FL_ENABLED	= (1 << 30),
+	FTRACE_FL_FREE		= (1 << 31),
 };
 
+#define FTRACE_FL_MASK		(0x3UL << 30)
+#define FTRACE_REF_MAX		((1 << 30) - 1)
+
 struct dyn_ftrace {
 	union {
 		unsigned long		ip; /* address of mcount call-site */
@@ -167,7 +179,12 @@ struct dyn_ftrace {
 };
 
 int ftrace_force_update(void);
-void ftrace_set_filter(unsigned char *buf, int len, int reset);
+void ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
+		       int len, int reset);
+void ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
+			int len, int reset);
+void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
+void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
 
 int register_ftrace_command(struct ftrace_func_command *cmd);
 int unregister_ftrace_command(struct ftrace_func_command *cmd);
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 22b32af1b5e..b5a550a39a7 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -37,6 +37,7 @@ struct trace_entry {
 	unsigned char		flags;
 	unsigned char		preempt_count;
 	int			pid;
+	int			padding;
 };
 
 #define FTRACE_MAX_EVENT						\
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index bfb8f934521..56d8fc87fbb 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -353,6 +353,8 @@ extern unsigned long get_zeroed_page(gfp_t gfp_mask);
 
 void *alloc_pages_exact(size_t size, gfp_t gfp_mask);
 void free_pages_exact(void *virt, size_t size);
+/* This is different from alloc_pages_exact_node !!! */
+void *alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask);
 
 #define __get_free_page(gfp_mask) \
 		__get_free_pages((gfp_mask), 0)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index bb29bb1dbd2..42f7e2fb501 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -799,7 +799,7 @@ static inline int __must_check hid_parse(struct hid_device *hdev)
  *
  * Call this in probe function *after* hid_parse. This will setup HW buffers
  * and start the device (if not deffered to device open). hid_hw_stop must be
- * called if this was successfull.
+ * called if this was successful.
  */
 static inline int __must_check hid_hw_start(struct hid_device *hdev,
 		unsigned int connect_mask)
diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
index 9db3d454887..d392975d888 100644
--- a/include/linux/hp_sdc.h
+++ b/include/linux/hp_sdc.h
@@ -101,7 +101,7 @@ int hp_sdc_dequeue_transaction(hp_sdc_transaction *this);
 #define HP_SDC_STATUS_REG	0x40	/* Data from an i8042 register */
 #define HP_SDC_STATUS_HILCMD    0x50	/* Command from HIL MLC */
 #define HP_SDC_STATUS_HILDATA   0x60	/* Data from HIL MLC */
-#define HP_SDC_STATUS_PUP	0x70	/* Sucessful power-up self test */
+#define HP_SDC_STATUS_PUP	0x70	/* Successful power-up self test */
 #define HP_SDC_STATUS_KCOOKED	0x80	/* Key from cooked kbd */
 #define HP_SDC_STATUS_KRPG	0xc0	/* Key from Repeat Gen */
 #define HP_SDC_STATUS_KMOD_SUP	0x10	/* Shift key is up */
diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index df29c8fde36..8847c8c2979 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -117,7 +117,7 @@ static inline void vma_adjust_trans_huge(struct vm_area_struct *vma,
 					 unsigned long end,
 					 long adjust_next)
 {
-	if (!vma->anon_vma || vma->vm_ops || vma->vm_file)
+	if (!vma->anon_vma || vma->vm_ops)
 		return;
 	__vma_adjust_trans_huge(vma, start, end, adjust_next);
 }
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index 9e7a12d6385..a6deef4f4f6 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -826,7 +826,7 @@ static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
  *	@c: I2O controller
  *
  *	This function tries to get a message frame. If no message frame is
- *	available do not wait until one is availabe (see also i2o_msg_get_wait).
+ *	available do not wait until one is available (see also i2o_msg_get_wait).
  *	The returned pointer to the message frame is not in I/O memory, it is
  *	allocated from a mempool. But because a MFA is allocated from the
  *	controller too it is guaranteed that i2o_msg_post() will never fail.
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index be69043d289..0f1325d9829 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -136,6 +136,7 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
 extern struct ctl_table ether_table[];
 #endif
 
+int mac_pton(const char *s, u8 *mac);
 extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
 
 #endif
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 635e1faec41..290bd8ac94c 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -86,7 +86,6 @@ struct vlan_group {
 					    * the vlan is attached to.
 					    */
 	unsigned int		nr_vlans;
-	int			killall;
 	struct hlist_node	hlist;	/* linked list */
 	struct net_device **vlan_devices_arrays[VLAN_GROUP_ARRAY_SPLIT_PARTS];
 	struct rcu_head		rcu;
@@ -132,7 +131,8 @@ extern u16 vlan_dev_vlan_id(const struct net_device *dev);
 
 extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
 			     u16 vlan_tci, int polling);
-extern bool vlan_hwaccel_do_receive(struct sk_buff **skb);
+extern bool vlan_do_receive(struct sk_buff **skb);
+extern struct sk_buff *vlan_untag(struct sk_buff *skb);
 extern gro_result_t
 vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
 		 unsigned int vlan_tci, struct sk_buff *skb);
@@ -166,13 +166,18 @@ static inline int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
 	return NET_XMIT_SUCCESS;
 }
 
-static inline bool vlan_hwaccel_do_receive(struct sk_buff **skb)
+static inline bool vlan_do_receive(struct sk_buff **skb)
 {
 	if ((*skb)->vlan_tci & VLAN_VID_MASK)
 		(*skb)->pkt_type = PACKET_OTHERHOST;
 	return false;
 }
 
+static inline struct sk_buff *vlan_untag(struct sk_buff *skb)
+{
+	return skb;
+}
+
 static inline gro_result_t
 vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
 		 unsigned int vlan_tci, struct sk_buff *skb)
diff --git a/include/linux/init.h b/include/linux/init.h
index 577671c5515..9146f39cddd 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -79,29 +79,29 @@
 #define __exitused  __used
 #endif
 
-#define __exit          __section(.exit.text) __exitused __cold
+#define __exit          __section(.exit.text) __exitused __cold notrace
 
 /* Used for HOTPLUG */
-#define __devinit        __section(.devinit.text) __cold
+#define __devinit        __section(.devinit.text) __cold notrace
 #define __devinitdata    __section(.devinit.data)
 #define __devinitconst   __section(.devinit.rodata)
-#define __devexit        __section(.devexit.text) __exitused __cold
+#define __devexit        __section(.devexit.text) __exitused __cold notrace
 #define __devexitdata    __section(.devexit.data)
 #define __devexitconst   __section(.devexit.rodata)
 
 /* Used for HOTPLUG_CPU */
-#define __cpuinit        __section(.cpuinit.text) __cold
+#define __cpuinit        __section(.cpuinit.text) __cold notrace
 #define __cpuinitdata    __section(.cpuinit.data)
 #define __cpuinitconst   __section(.cpuinit.rodata)
-#define __cpuexit        __section(.cpuexit.text) __exitused __cold
+#define __cpuexit        __section(.cpuexit.text) __exitused __cold notrace
 #define __cpuexitdata    __section(.cpuexit.data)
 #define __cpuexitconst   __section(.cpuexit.rodata)
 
 /* Used for MEMORY_HOTPLUG */
-#define __meminit        __section(.meminit.text) __cold
+#define __meminit        __section(.meminit.text) __cold notrace
 #define __meminitdata    __section(.meminit.data)
 #define __meminitconst   __section(.meminit.rodata)
-#define __memexit        __section(.memexit.text) __exitused __cold
+#define __memexit        __section(.memexit.text) __exitused __cold notrace
 #define __memexitdata    __section(.memexit.data)
 #define __memexitconst   __section(.memexit.rodata)
 
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index caa151fbebb..689496bb665 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -134,7 +134,6 @@ extern struct cred init_cred;
 	.stack		= &init_thread_info,				\
 	.usage		= ATOMIC_INIT(2),				\
 	.flags		= PF_KTHREAD,					\
-	.lock_depth	= -1,						\
 	.prio		= MAX_PRIO-20,					\
 	.static_prio	= MAX_PRIO-20,					\
 	.normal_prio	= MAX_PRIO-20,					\
diff --git a/include/linux/input.h b/include/linux/input.h
index f3a7794a18c..771d6d85667 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -167,6 +167,7 @@ struct input_keymap_entry {
 #define SYN_REPORT		0
 #define SYN_CONFIG		1
 #define SYN_MT_REPORT		2
+#define SYN_DROPPED		3
 
 /*
  * Keys and buttons
@@ -553,8 +554,8 @@ struct input_keymap_entry {
 #define KEY_DVD			0x185	/* Media Select DVD */
 #define KEY_AUX			0x186
 #define KEY_MP3			0x187
-#define KEY_AUDIO		0x188
-#define KEY_VIDEO		0x189
+#define KEY_AUDIO		0x188	/* AL Audio Browser */
+#define KEY_VIDEO		0x189	/* AL Movie Browser */
 #define KEY_DIRECTORY		0x18a
 #define KEY_LIST		0x18b
 #define KEY_MEMO		0x18c	/* Media Select Messages */
@@ -603,8 +604,9 @@ struct input_keymap_entry {
 #define KEY_FRAMEFORWARD	0x1b5
 #define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
 #define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
-#define KEY_10CHANNELSUP        0x1b8   /* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN      0x1b9   /* 10 channels down (10-) */
+#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
+#define KEY_IMAGES		0x1ba	/* AL Image Browser */
 
 #define KEY_DEL_EOL		0x1c0
 #define KEY_DEL_EOS		0x1c1
diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
index b3ac06a4435..318bb82325a 100644
--- a/include/linux/input/mt.h
+++ b/include/linux/input/mt.h
@@ -48,6 +48,12 @@ static inline void input_mt_slot(struct input_dev *dev, int slot)
 	input_event(dev, EV_ABS, ABS_MT_SLOT, slot);
 }
 
+static inline bool input_is_mt_axis(int axis)
+{
+	return axis == ABS_MT_SLOT ||
+		(axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST);
+}
+
 void input_mt_report_slot_state(struct input_dev *dev,
 				unsigned int tool_type, bool active);
 
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 59b72ca1c5d..6c12989839d 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -98,7 +98,7 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
  * @next:	pointer to the next irqaction for shared interrupts
  * @irq:	interrupt number
  * @dir:	pointer to the proc/irq/NN/name entry
- * @thread_fn:	interupt handler function for threaded interrupts
+ * @thread_fn:	interrupt handler function for threaded interrupts
  * @thread:	thread pointer for threaded interrupts
  * @thread_flags:	flags related to @thread
  * @thread_mask:	bitmask for keeping track of @thread activity
@@ -338,14 +338,6 @@ static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long
 /* IRQ wakeup (PM) control: */
 extern int irq_set_irq_wake(unsigned int irq, unsigned int on);
 
-#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT
-/* Please do not use: Use the replacement functions instead */
-static inline int set_irq_wake(unsigned int irq, unsigned int on)
-{
-	return irq_set_irq_wake(irq, on);
-}
-#endif
-
 static inline int enable_irq_wake(unsigned int irq)
 {
 	return irq_set_irq_wake(irq, 1);
@@ -422,7 +414,6 @@ enum
 	TASKLET_SOFTIRQ,
 	SCHED_SOFTIRQ,
 	HRTIMER_SOFTIRQ,
-	RCU_SOFTIRQ,	/* Preferable RCU should always be the last softirq */
 
 	NR_SOFTIRQS
 };
@@ -492,7 +483,7 @@ extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
    Properties:
    * If tasklet_schedule() is called, then tasklet is guaranteed
      to be executed on some cpu at least once after this.
-   * If the tasklet is already scheduled, but its excecution is still not
+   * If the tasklet is already scheduled, but its execution is still not
      started, it will be executed only once.
    * If this tasklet is already running on another CPU (or schedule is called
      from tasklet itself), it is rescheduled for later.
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 045f2f275cd..ca85cf894e3 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -111,7 +111,7 @@ struct ipmi_ipmb_addr {
  * A LAN Address.  This is an address to/from a LAN interface bridged
  * by the BMC, not an address actually out on the LAN.
  *
- * A concious decision was made here to deviate slightly from the IPMI
+ * A conscious decision was made here to deviate slightly from the IPMI
  * spec.  We do not use rqSWID and rsSWID like it shows in the
  * message.  Instead, we use remote_SWID and local_SWID.  This means
  * that any message (a request or response) from another device will
@@ -259,7 +259,7 @@ struct ipmi_recv_msg {
 	void (*done)(struct ipmi_recv_msg *msg);
 
 	/* Place-holder for the data, don't make any assumptions about
-	   the size or existance of this, since it may change. */
+	   the size or existence of this, since it may change. */
 	unsigned char   msg_data[IPMI_MAX_MSG_LENGTH];
 };
 
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 2a375a72ce3..8b453844663 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -53,24 +53,18 @@ typedef	void (*irq_preflow_handler_t)(struct irq_data *data);
  * Bits which can be modified via irq_set/clear/modify_status_flags()
  * IRQ_LEVEL			- Interrupt is level type. Will be also
  *				  updated in the code when the above trigger
- *				  bits are modified via set_irq_type()
+ *				  bits are modified via irq_set_irq_type()
  * IRQ_PER_CPU			- Mark an interrupt PER_CPU. Will protect
  *				  it from affinity setting
  * IRQ_NOPROBE			- Interrupt cannot be probed by autoprobing
  * IRQ_NOREQUEST		- Interrupt cannot be requested via
  *				  request_irq()
+ * IRQ_NOTHREAD			- Interrupt cannot be threaded
  * IRQ_NOAUTOEN			- Interrupt is not automatically enabled in
  *				  request/setup_irq()
  * IRQ_NO_BALANCING		- Interrupt cannot be balanced (affinity set)
  * IRQ_MOVE_PCNTXT		- Interrupt can be migrated from process context
  * IRQ_NESTED_TRHEAD		- Interrupt nests into another thread
- *
- * Deprecated bits. They are kept updated as long as
- * CONFIG_GENERIC_HARDIRQS_NO_COMPAT is not set. Will go away soon. These bits
- * are internal state of the core code and if you really need to acces
- * them then talk to the genirq maintainer instead of hacking
- * something weird.
- *
  */
 enum {
 	IRQ_TYPE_NONE		= 0x00000000,
@@ -92,6 +86,7 @@ enum {
 	IRQ_NO_BALANCING	= (1 << 13),
 	IRQ_MOVE_PCNTXT		= (1 << 14),
 	IRQ_NESTED_THREAD	= (1 << 15),
+	IRQ_NOTHREAD		= (1 << 16),
 };
 
 #define IRQF_MODIFY_MASK	\
@@ -268,23 +263,6 @@ static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d)
  * struct irq_chip - hardware interrupt chip descriptor
  *
  * @name:		name for /proc/interrupts
- * @startup:		deprecated, replaced by irq_startup
- * @shutdown:		deprecated, replaced by irq_shutdown
- * @enable:		deprecated, replaced by irq_enable
- * @disable:		deprecated, replaced by irq_disable
- * @ack:		deprecated, replaced by irq_ack
- * @mask:		deprecated, replaced by irq_mask
- * @mask_ack:		deprecated, replaced by irq_mask_ack
- * @unmask:		deprecated, replaced by irq_unmask
- * @eoi:		deprecated, replaced by irq_eoi
- * @end:		deprecated, will go away with __do_IRQ()
- * @set_affinity:	deprecated, replaced by irq_set_affinity
- * @retrigger:		deprecated, replaced by irq_retrigger
- * @set_type:		deprecated, replaced by irq_set_type
- * @set_wake:		deprecated, replaced by irq_wake
- * @bus_lock:		deprecated, replaced by irq_bus_lock
- * @bus_sync_unlock:	deprecated, replaced by irq_bus_sync_unlock
- *
  * @irq_startup:	start up the interrupt (defaults to ->enable if NULL)
  * @irq_shutdown:	shut down the interrupt (defaults to ->disable if NULL)
  * @irq_enable:		enable the interrupt (defaults to chip->unmask if NULL)
@@ -302,6 +280,9 @@ static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d)
  * @irq_bus_sync_unlock:function to sync and unlock slow bus (i2c) chips
  * @irq_cpu_online:	configure an interrupt source for a secondary CPU
  * @irq_cpu_offline:	un-configure an interrupt source for a secondary CPU
+ * @irq_suspend:	function called from core code on suspend once per chip
+ * @irq_resume:		function called from core code on resume once per chip
+ * @irq_pm_shutdown:	function called from core code on shutdown once per chip
  * @irq_print_chip:	optional to print special chip info in show_interrupts
  * @flags:		chip specific flags
  *
@@ -331,6 +312,10 @@ struct irq_chip {
 	void		(*irq_cpu_online)(struct irq_data *data);
 	void		(*irq_cpu_offline)(struct irq_data *data);
 
+	void		(*irq_suspend)(struct irq_data *data);
+	void		(*irq_resume)(struct irq_data *data);
+	void		(*irq_pm_shutdown)(struct irq_data *data);
+
 	void		(*irq_print_chip)(struct irq_data *data, struct seq_file *p);
 
 	unsigned long	flags;
@@ -446,7 +431,7 @@ irq_set_handler(unsigned int irq, irq_flow_handler_t handle)
 /*
  * Set a highlevel chained flow handler for a given IRQ.
  * (a chained handler is automatically enabled and set to
- *  IRQ_NOREQUEST and IRQ_NOPROBE)
+ *  IRQ_NOREQUEST, IRQ_NOPROBE, and IRQ_NOTHREAD)
  */
 static inline void
 irq_set_chained_handler(unsigned int irq, irq_flow_handler_t handle)
@@ -476,6 +461,16 @@ static inline void irq_set_probe(unsigned int irq)
 	irq_modify_status(irq, IRQ_NOPROBE, 0);
 }
 
+static inline void irq_set_nothread(unsigned int irq)
+{
+	irq_modify_status(irq, 0, IRQ_NOTHREAD);
+}
+
+static inline void irq_set_thread(unsigned int irq)
+{
+	irq_modify_status(irq, IRQ_NOTHREAD, 0);
+}
+
 static inline void irq_set_nested_thread(unsigned int irq, bool nest)
 {
 	if (nest)
@@ -580,6 +575,145 @@ static inline int irq_reserve_irq(unsigned int irq)
 	return irq_reserve_irqs(irq, 1);
 }
 
+#ifndef irq_reg_writel
+# define irq_reg_writel(val, addr)	writel(val, addr)
+#endif
+#ifndef irq_reg_readl
+# define irq_reg_readl(addr)		readl(addr)
+#endif
+
+/**
+ * struct irq_chip_regs - register offsets for struct irq_gci
+ * @enable:	Enable register offset to reg_base
+ * @disable:	Disable register offset to reg_base
+ * @mask:	Mask register offset to reg_base
+ * @ack:	Ack register offset to reg_base
+ * @eoi:	Eoi register offset to reg_base
+ * @type:	Type configuration register offset to reg_base
+ * @polarity:	Polarity configuration register offset to reg_base
+ */
+struct irq_chip_regs {
+	unsigned long		enable;
+	unsigned long		disable;
+	unsigned long		mask;
+	unsigned long		ack;
+	unsigned long		eoi;
+	unsigned long		type;
+	unsigned long		polarity;
+};
+
+/**
+ * struct irq_chip_type - Generic interrupt chip instance for a flow type
+ * @chip:		The real interrupt chip which provides the callbacks
+ * @regs:		Register offsets for this chip
+ * @handler:		Flow handler associated with this chip
+ * @type:		Chip can handle these flow types
+ *
+ * A irq_generic_chip can have several instances of irq_chip_type when
+ * it requires different functions and register offsets for different
+ * flow types.
+ */
+struct irq_chip_type {
+	struct irq_chip		chip;
+	struct irq_chip_regs	regs;
+	irq_flow_handler_t	handler;
+	u32			type;
+};
+
+/**
+ * struct irq_chip_generic - Generic irq chip data structure
+ * @lock:		Lock to protect register and cache data access
+ * @reg_base:		Register base address (virtual)
+ * @irq_base:		Interrupt base nr for this chip
+ * @irq_cnt:		Number of interrupts handled by this chip
+ * @mask_cache:		Cached mask register
+ * @type_cache:		Cached type register
+ * @polarity_cache:	Cached polarity register
+ * @wake_enabled:	Interrupt can wakeup from suspend
+ * @wake_active:	Interrupt is marked as an wakeup from suspend source
+ * @num_ct:		Number of available irq_chip_type instances (usually 1)
+ * @private:		Private data for non generic chip callbacks
+ * @list:		List head for keeping track of instances
+ * @chip_types:		Array of interrupt irq_chip_types
+ *
+ * Note, that irq_chip_generic can have multiple irq_chip_type
+ * implementations which can be associated to a particular irq line of
+ * an irq_chip_generic instance. That allows to share and protect
+ * state in an irq_chip_generic instance when we need to implement
+ * different flow mechanisms (level/edge) for it.
+ */
+struct irq_chip_generic {
+	raw_spinlock_t		lock;
+	void __iomem		*reg_base;
+	unsigned int		irq_base;
+	unsigned int		irq_cnt;
+	u32			mask_cache;
+	u32			type_cache;
+	u32			polarity_cache;
+	u32			wake_enabled;
+	u32			wake_active;
+	unsigned int		num_ct;
+	void			*private;
+	struct list_head	list;
+	struct irq_chip_type	chip_types[0];
+};
+
+/**
+ * enum irq_gc_flags - Initialization flags for generic irq chips
+ * @IRQ_GC_INIT_MASK_CACHE:	Initialize the mask_cache by reading mask reg
+ * @IRQ_GC_INIT_NESTED_LOCK:	Set the lock class of the irqs to nested for
+ *				irq chips which need to call irq_set_wake() on
+ *				the parent irq. Usually GPIO implementations
+ */
+enum irq_gc_flags {
+	IRQ_GC_INIT_MASK_CACHE		= 1 << 0,
+	IRQ_GC_INIT_NESTED_LOCK		= 1 << 1,
+};
+
+/* Generic chip callback functions */
+void irq_gc_noop(struct irq_data *d);
+void irq_gc_mask_disable_reg(struct irq_data *d);
+void irq_gc_mask_set_bit(struct irq_data *d);
+void irq_gc_mask_clr_bit(struct irq_data *d);
+void irq_gc_unmask_enable_reg(struct irq_data *d);
+void irq_gc_ack(struct irq_data *d);
+void irq_gc_mask_disable_reg_and_ack(struct irq_data *d);
+void irq_gc_eoi(struct irq_data *d);
+int irq_gc_set_wake(struct irq_data *d, unsigned int on);
+
+/* Setup functions for irq_chip_generic */
+struct irq_chip_generic *
+irq_alloc_generic_chip(const char *name, int nr_ct, unsigned int irq_base,
+		       void __iomem *reg_base, irq_flow_handler_t handler);
+void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk,
+			    enum irq_gc_flags flags, unsigned int clr,
+			    unsigned int set);
+int irq_setup_alt_chip(struct irq_data *d, unsigned int type);
+void irq_remove_generic_chip(struct irq_chip_generic *gc, u32 msk,
+			     unsigned int clr, unsigned int set);
+
+static inline struct irq_chip_type *irq_data_get_chip_type(struct irq_data *d)
+{
+	return container_of(d->chip, struct irq_chip_type, chip);
+}
+
+#define IRQ_MSK(n) (u32)((n) < 32 ? ((1 << (n)) - 1) : UINT_MAX)
+
+#ifdef CONFIG_SMP
+static inline void irq_gc_lock(struct irq_chip_generic *gc)
+{
+	raw_spin_lock(&gc->lock);
+}
+
+static inline void irq_gc_unlock(struct irq_chip_generic *gc)
+{
+	raw_spin_unlock(&gc->lock);
+}
+#else
+static inline void irq_gc_lock(struct irq_chip_generic *gc) { }
+static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
+#endif
+
 #endif /* CONFIG_GENERIC_HARDIRQS */
 
 #endif /* !CONFIG_S390 */
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index a082905b5eb..2d921b35212 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -16,16 +16,18 @@ struct timer_rand_state;
  * @irq_data:		per irq and chip data passed down to chip functions
  * @timer_rand_state:	pointer to timer rand state struct
  * @kstat_irqs:		irq stats per cpu
- * @handle_irq:		highlevel irq-events handler [if NULL, __do_IRQ()]
+ * @handle_irq:		highlevel irq-events handler
+ * @preflow_handler:	handler called before the flow handler (currently used by sparc)
  * @action:		the irq action chain
  * @status:		status information
  * @core_internal_state__do_not_mess_with_it: core internal status information
  * @depth:		disable-depth, for nested irq_disable() calls
- * @wake_depth:		enable depth, for multiple set_irq_wake() callers
+ * @wake_depth:		enable depth, for multiple irq_set_irq_wake() callers
  * @irq_count:		stats field to detect stalled irqs
  * @last_unhandled:	aging timer for unhandled count
  * @irqs_unhandled:	stats field for spurious unhandled interrupts
  * @lock:		locking for SMP
+ * @affinity_hint:	hint to user space for preferred irq affinity
  * @affinity_notify:	context for notification of affinity changes
  * @pending_mask:	pending rebalanced interrupts
  * @threads_oneshot:	bitfield to handle shared oneshot threads
@@ -109,10 +111,7 @@ static inline void generic_handle_irq_desc(unsigned int irq, struct irq_desc *de
 	desc->handle_irq(irq, desc);
 }
 
-static inline void generic_handle_irq(unsigned int irq)
-{
-	generic_handle_irq_desc(irq, irq_to_desc(irq));
-}
+int generic_handle_irq(unsigned int irq);
 
 /* Test to see if a driver has successfully requested an irq */
 static inline int irq_has_action(unsigned int irq)
diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h
index 4b3ecc40889..96521370c78 100644
--- a/include/linux/isdn/hdlc.h
+++ b/include/linux/isdn/hdlc.h
@@ -2,7 +2,7 @@
  * hdlc.h  --  General purpose ISDN HDLC decoder.
  *
  * Implementation of a HDLC decoder/encoder in software.
- * Neccessary because some ISDN devices don't have HDLC
+ * Necessary because some ISDN devices don't have HDLC
  * controllers.
  *
  * Copyright (C)
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
index 88b45895746..94ab5e942e5 100644
--- a/include/linux/ixjuser.h
+++ b/include/linux/ixjuser.h
@@ -50,7 +50,7 @@
 * IOCTL's used for the Quicknet Telephony Cards
 *
 * If you use the IXJCTL_TESTRAM command, the card must be power cycled to
-* reset the SRAM values before futher use.
+* reset the SRAM values before further use.
 *
 ******************************************************************************/
 
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 922aa313c9f..f97672a36fa 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -42,7 +42,7 @@
 /* LATCH is used in the interval timer and ftape setup. */
 #define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
 
-/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can
+/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
  * improve accuracy by shifting LSH bits, hence calculating:
  *     (NOM << LSH) / DEN
  * This however means trouble for large NOM, because (NOM << LSH) may no
diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
index 7880f18e4b8..83e745f3ead 100644
--- a/include/linux/jump_label.h
+++ b/include/linux/jump_label.h
@@ -1,20 +1,43 @@
 #ifndef _LINUX_JUMP_LABEL_H
 #define _LINUX_JUMP_LABEL_H
 
+#include <linux/types.h>
+#include <linux/compiler.h>
+
 #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
+
+struct jump_label_key {
+	atomic_t enabled;
+	struct jump_entry *entries;
+#ifdef CONFIG_MODULES
+	struct jump_label_mod *next;
+#endif
+};
+
 # include <asm/jump_label.h>
 # define HAVE_JUMP_LABEL
 #endif
 
 enum jump_label_type {
+	JUMP_LABEL_DISABLE = 0,
 	JUMP_LABEL_ENABLE,
-	JUMP_LABEL_DISABLE
 };
 
 struct module;
 
 #ifdef HAVE_JUMP_LABEL
 
+#ifdef CONFIG_MODULES
+#define JUMP_LABEL_INIT {{ 0 }, NULL, NULL}
+#else
+#define JUMP_LABEL_INIT {{ 0 }, NULL}
+#endif
+
+static __always_inline bool static_branch(struct jump_label_key *key)
+{
+	return arch_static_branch(key);
+}
+
 extern struct jump_entry __start___jump_table[];
 extern struct jump_entry __stop___jump_table[];
 
@@ -23,37 +46,37 @@ extern void jump_label_unlock(void);
 extern void arch_jump_label_transform(struct jump_entry *entry,
 				 enum jump_label_type type);
 extern void arch_jump_label_text_poke_early(jump_label_t addr);
-extern void jump_label_update(unsigned long key, enum jump_label_type type);
-extern void jump_label_apply_nops(struct module *mod);
 extern int jump_label_text_reserved(void *start, void *end);
+extern void jump_label_inc(struct jump_label_key *key);
+extern void jump_label_dec(struct jump_label_key *key);
+extern bool jump_label_enabled(struct jump_label_key *key);
+extern void jump_label_apply_nops(struct module *mod);
 
-#define jump_label_enable(key) \
-	jump_label_update((unsigned long)key, JUMP_LABEL_ENABLE);
+#else
 
-#define jump_label_disable(key) \
-	jump_label_update((unsigned long)key, JUMP_LABEL_DISABLE);
+#include <asm/atomic.h>
 
-#else
+#define JUMP_LABEL_INIT {ATOMIC_INIT(0)}
 
-#define JUMP_LABEL(key, label)			\
-do {						\
-	if (unlikely(*key))			\
-		goto label;			\
-} while (0)
+struct jump_label_key {
+	atomic_t enabled;
+};
 
-#define jump_label_enable(cond_var)	\
-do {					\
-       *(cond_var) = 1;			\
-} while (0)
+static __always_inline bool static_branch(struct jump_label_key *key)
+{
+	if (unlikely(atomic_read(&key->enabled)))
+		return true;
+	return false;
+}
 
-#define jump_label_disable(cond_var)	\
-do {					\
-       *(cond_var) = 0;			\
-} while (0)
+static inline void jump_label_inc(struct jump_label_key *key)
+{
+	atomic_inc(&key->enabled);
+}
 
-static inline int jump_label_apply_nops(struct module *mod)
+static inline void jump_label_dec(struct jump_label_key *key)
 {
-	return 0;
+	atomic_dec(&key->enabled);
 }
 
 static inline int jump_label_text_reserved(void *start, void *end)
@@ -64,16 +87,16 @@ static inline int jump_label_text_reserved(void *start, void *end)
 static inline void jump_label_lock(void) {}
 static inline void jump_label_unlock(void) {}
 
-#endif
+static inline bool jump_label_enabled(struct jump_label_key *key)
+{
+	return !!atomic_read(&key->enabled);
+}
 
-#define COND_STMT(key, stmt)					\
-do {								\
-	__label__ jl_enabled;					\
-	JUMP_LABEL(key, jl_enabled);				\
-	if (0) {						\
-jl_enabled:							\
-		stmt;						\
-	}							\
-} while (0)
+static inline int jump_label_apply_nops(struct module *mod)
+{
+	return 0;
+}
+
+#endif
 
 #endif
diff --git a/include/linux/jump_label_ref.h b/include/linux/jump_label_ref.h
deleted file mode 100644
index e5d012ad92c..00000000000
--- a/include/linux/jump_label_ref.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _LINUX_JUMP_LABEL_REF_H
-#define _LINUX_JUMP_LABEL_REF_H
-
-#include <linux/jump_label.h>
-#include <asm/atomic.h>
-
-#ifdef HAVE_JUMP_LABEL
-
-static inline void jump_label_inc(atomic_t *key)
-{
-	if (atomic_add_return(1, key) == 1)
-		jump_label_enable(key);
-}
-
-static inline void jump_label_dec(atomic_t *key)
-{
-	if (atomic_dec_and_test(key))
-		jump_label_disable(key);
-}
-
-#else /* !HAVE_JUMP_LABEL */
-
-static inline void jump_label_inc(atomic_t *key)
-{
-	atomic_inc(key);
-}
-
-static inline void jump_label_dec(atomic_t *key)
-{
-	atomic_dec(key);
-}
-
-#undef JUMP_LABEL
-#define JUMP_LABEL(key, label)						\
-do {									\
-	if (unlikely(__builtin_choose_expr(				\
-	      __builtin_types_compatible_p(typeof(key), atomic_t *),	\
-	      atomic_read((atomic_t *)(key)), *(key))))			\
-		goto label;						\
-} while (0)
-
-#endif /* HAVE_JUMP_LABEL */
-
-#endif /* _LINUX_JUMP_LABEL_REF_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 00cec4dc0ae..f37ba716ef8 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -283,6 +283,7 @@ extern char *get_options(const char *str, int nints, int *ints);
 extern unsigned long long memparse(const char *ptr, char **retptr);
 
 extern int core_kernel_text(unsigned long addr);
+extern int core_kernel_data(unsigned long addr);
 extern int __kernel_text_address(unsigned long addr);
 extern int kernel_text_address(unsigned long addr);
 extern int func_ptr_is_kernel_text(void *ptr);
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 03e8e8dbc57..c2478a342cd 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -208,6 +208,7 @@ int __init parse_crashkernel(char *cmdline, unsigned long long system_ram,
 		unsigned long long *crash_size, unsigned long long *crash_base);
 int crash_shrink_memory(unsigned long new_size);
 size_t crash_get_memory_size(void);
+void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
 
 #else /* !CONFIG_KEXEC */
 struct pt_regs;
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 6efd7a78de6..31023182385 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -113,5 +113,6 @@ extern void usermodehelper_init(void);
 
 extern int usermodehelper_disable(void);
 extern void usermodehelper_enable(void);
+extern bool usermodehelper_is_disabled(void);
 
 #endif /* __LINUX_KMOD_H__ */
diff --git a/include/linux/ktime.h b/include/linux/ktime.h
index e1ceaa9b36b..603bec2913b 100644
--- a/include/linux/ktime.h
+++ b/include/linux/ktime.h
@@ -35,7 +35,7 @@
  *
  * On 32-bit CPUs an optimized representation of the timespec structure
  * is used to avoid expensive conversions from and to timespecs. The
- * endian-aware order of the tv struct members is choosen to allow
+ * endian-aware order of the tv struct members is chosen to allow
  * mathematical operations on the tv64 member of the union too, which
  * for certain operations produces better code.
  *
@@ -158,7 +158,7 @@ static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
  * @lhs:	minuend
  * @rhs:	subtrahend
  *
- * Returns the remainder of the substraction
+ * Returns the remainder of the subtraction
  */
 static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs)
 {
diff --git a/include/linux/led-lm3530.h b/include/linux/led-lm3530.h
index bb69d20da0d..58592fa67d2 100644
--- a/include/linux/led-lm3530.h
+++ b/include/linux/led-lm3530.h
@@ -41,7 +41,7 @@
 #define LM3530_RAMP_TIME_8s		(7)
 
 /* ALS Resistor Select */
-#define LM3530_ALS_IMPD_Z		(0x00) /* ALS Impedence */
+#define LM3530_ALS_IMPD_Z		(0x00) /* ALS Impedance */
 #define LM3530_ALS_IMPD_13_53kOhm	(0x01)
 #define LM3530_ALS_IMPD_9_01kOhm	(0x02)
 #define LM3530_ALS_IMPD_5_41kOhm	(0x03)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index c71f46960f3..5a9926b3407 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -137,8 +137,6 @@ enum {
 	ATA_DFLAG_ACPI_PENDING	= (1 << 5), /* ACPI resume action pending */
 	ATA_DFLAG_ACPI_FAILED	= (1 << 6), /* ACPI on devcfg has failed */
 	ATA_DFLAG_AN		= (1 << 7), /* AN configured */
-	ATA_DFLAG_HIPM		= (1 << 8), /* device supports HIPM */
-	ATA_DFLAG_DIPM		= (1 << 9), /* device supports DIPM */
 	ATA_DFLAG_DMADIR	= (1 << 10), /* device requires DMADIR */
 	ATA_DFLAG_CFG_MASK	= (1 << 12) - 1,
 
@@ -198,6 +196,7 @@ enum {
 					      * management */
 	ATA_FLAG_SW_ACTIVITY	= (1 << 22), /* driver supports sw activity
 					      * led */
+	ATA_FLAG_NO_DIPM	= (1 << 23), /* host not happy with DIPM */
 
 	/* bits 24:31 of ap->flags are reserved for LLD specific flags */
 
@@ -364,7 +363,7 @@ enum {
 	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
 
 	/* Horkage types. May be set by libata or controller on drives
-	   (some horkage may be drive/controller pair dependant */
+	   (some horkage may be drive/controller pair dependent */
 
 	ATA_HORKAGE_DIAGNOSTIC	= (1 << 0),	/* Failed boot diag */
 	ATA_HORKAGE_NODMA	= (1 << 1),	/* DMA problems */
@@ -1152,6 +1151,7 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 		      ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
 		      ata_postreset_fn_t postreset);
 extern void ata_std_error_handler(struct ata_port *ap);
+extern int ata_link_nr_enabled(struct ata_link *link);
 
 /*
  * Base operations to inherit from and initializers for sht
diff --git a/include/linux/list.h b/include/linux/list.h
index 3a54266a1e8..cc6d2aa6b41 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -4,7 +4,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/poison.h>
-#include <linux/prefetch.h>
+#include <linux/const.h>
 
 /*
  * Simple doubly linked list implementation.
@@ -367,18 +367,15 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @head:	the head for your list.
  */
 #define list_for_each(pos, head) \
-	for (pos = (head)->next; prefetch(pos->next), pos != (head); \
-        	pos = pos->next)
+	for (pos = (head)->next; pos != (head); pos = pos->next)
 
 /**
  * __list_for_each	-	iterate over a list
  * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  *
- * This variant differs from list_for_each() in that it's the
- * simplest possible list iteration code, no prefetching is done.
- * Use this for code that knows the list to be very short (empty
- * or 1 entry) most of the time.
+ * This variant doesn't differ from list_for_each() any more.
+ * We don't do prefetching in either case.
  */
 #define __list_for_each(pos, head) \
 	for (pos = (head)->next; pos != (head); pos = pos->next)
@@ -389,8 +386,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * @head:	the head for your list.
  */
 #define list_for_each_prev(pos, head) \
-	for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \
-        	pos = pos->prev)
+	for (pos = (head)->prev; pos != (head); pos = pos->prev)
 
 /**
  * list_for_each_safe - iterate over a list safe against removal of list entry
@@ -410,7 +406,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each_prev_safe(pos, n, head) \
 	for (pos = (head)->prev, n = pos->prev; \
-	     prefetch(pos->prev), pos != (head); \
+	     pos != (head); \
 	     pos = n, n = pos->prev)
 
 /**
@@ -421,7 +417,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each_entry(pos, head, member)				\
 	for (pos = list_entry((head)->next, typeof(*pos), member);	\
-	     prefetch(pos->member.next), &pos->member != (head); 	\
+	     &pos->member != (head); 	\
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
@@ -432,7 +428,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each_entry_reverse(pos, head, member)			\
 	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
-	     prefetch(pos->member.prev), &pos->member != (head); 	\
+	     &pos->member != (head); 	\
 	     pos = list_entry(pos->member.prev, typeof(*pos), member))
 
 /**
@@ -457,7 +453,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each_entry_continue(pos, head, member) 		\
 	for (pos = list_entry(pos->member.next, typeof(*pos), member);	\
-	     prefetch(pos->member.next), &pos->member != (head);	\
+	     &pos->member != (head);	\
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
@@ -471,7 +467,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each_entry_continue_reverse(pos, head, member)		\
 	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
-	     prefetch(pos->member.prev), &pos->member != (head);	\
+	     &pos->member != (head);	\
 	     pos = list_entry(pos->member.prev, typeof(*pos), member))
 
 /**
@@ -483,7 +479,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * Iterate over list of given type, continuing from current position.
  */
 #define list_for_each_entry_from(pos, head, member) 			\
-	for (; prefetch(pos->member.next), &pos->member != (head);	\
+	for (; &pos->member != (head);	\
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
@@ -664,8 +660,7 @@ static inline void hlist_move_list(struct hlist_head *old,
 #define hlist_entry(ptr, type, member) container_of(ptr,type,member)
 
 #define hlist_for_each(pos, head) \
-	for (pos = (head)->first; pos && ({ prefetch(pos->next); 1; }); \
-	     pos = pos->next)
+	for (pos = (head)->first; pos ; pos = pos->next)
 
 #define hlist_for_each_safe(pos, n, head) \
 	for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
@@ -680,7 +675,7 @@ static inline void hlist_move_list(struct hlist_head *old,
  */
 #define hlist_for_each_entry(tpos, pos, head, member)			 \
 	for (pos = (head)->first;					 \
-	     pos && ({ prefetch(pos->next); 1;}) &&			 \
+	     pos &&							 \
 		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
 	     pos = pos->next)
 
@@ -692,7 +687,7 @@ static inline void hlist_move_list(struct hlist_head *old,
  */
 #define hlist_for_each_entry_continue(tpos, pos, member)		 \
 	for (pos = (pos)->next;						 \
-	     pos && ({ prefetch(pos->next); 1;}) &&			 \
+	     pos &&							 \
 		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
 	     pos = pos->next)
 
@@ -703,7 +698,7 @@ static inline void hlist_move_list(struct hlist_head *old,
  * @member:	the name of the hlist_node within the struct.
  */
 #define hlist_for_each_entry_from(tpos, pos, member)			 \
-	for (; pos && ({ prefetch(pos->next); 1;}) &&			 \
+	for (; pos &&							 \
 		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
 	     pos = pos->next)
 
diff --git a/include/linux/list_bl.h b/include/linux/list_bl.h
index 5bad17d1acd..31f9d75adc5 100644
--- a/include/linux/list_bl.h
+++ b/include/linux/list_bl.h
@@ -2,6 +2,7 @@
 #define _LINUX_LIST_BL_H
 
 #include <linux/list.h>
+#include <linux/bit_spinlock.h>
 
 /*
  * Special version of lists, where head of the list has a lock in the lowest
@@ -114,6 +115,16 @@ static inline void hlist_bl_del_init(struct hlist_bl_node *n)
 	}
 }
 
+static inline void hlist_bl_lock(struct hlist_bl_head *b)
+{
+	bit_spin_lock(0, (unsigned long *)b);
+}
+
+static inline void hlist_bl_unlock(struct hlist_bl_head *b)
+{
+	__bit_spin_unlock(0, (unsigned long *)b);
+}
+
 /**
  * hlist_bl_for_each_entry	- iterate over list of given type
  * @tpos:	the type * to use as a loop cursor.
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index 78fbf24f357..6a4fab7c6e0 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -148,7 +148,7 @@ write intent log information, three of which are mentioned here.
  *
  * DRBD currently (May 2009) only uses 61 elements on the resync lru_cache
  * (total memory usage 2 pages), and up to 3833 elements on the act_log
- * lru_cache, totalling ~215 kB for 64bit architechture, ~53 pages.
+ * lru_cache, totalling ~215 kB for 64bit architecture, ~53 pages.
  *
  * We usually do not actually free these objects again, but only "recycle"
  * them, as the change "index: -old_label, +LC_FREE" would need a transaction
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 5a5ce705583..5e9840f5098 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -216,7 +216,7 @@ static inline void mem_cgroup_del_lru_list(struct page *page, int lru)
 	return ;
 }
 
-static inline inline void mem_cgroup_rotate_reclaimable_page(struct page *page)
+static inline void mem_cgroup_rotate_reclaimable_page(struct page *page)
 {
 	return ;
 }
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index ad1b19aa650..aef23309a74 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -86,16 +86,25 @@ extern int mfd_clone_cell(const char *cell, const char **clones,
  */
 static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev)
 {
-	return pdev->dev.platform_data;
+	return pdev->mfd_cell;
 }
 
 /*
  * Given a platform device that's been created by mfd_add_devices(), fetch
  * the .mfd_data entry from the mfd_cell that created it.
+ * Otherwise just return the platform_data pointer.
+ * This maintains compatibility with platform drivers whose devices aren't
+ * created by the mfd layer, and expect platform_data to contain what would've
+ * otherwise been in mfd_data.
  */
 static inline void *mfd_get_data(struct platform_device *pdev)
 {
-	return mfd_get_cell(pdev)->mfd_data;
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+
+	if (cell)
+		return cell->mfd_data;
+	else
+		return pdev->dev.platform_data;
 }
 
 extern int mfd_add_devices(struct device *parent, int id,
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index afe4db49402..632d1567a1b 100644
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -81,7 +81,9 @@ struct wm831x_touch_pdata {
 	int rpu;               /** Pen down sensitivity resistor divider */
 	int pressure;          /** Report pressure (boolean) */
 	unsigned int data_irq; /** Touch data ready IRQ */
+	int data_irqf;         /** IRQ flags for data ready IRQ */
 	unsigned int pd_irq;   /** Touch pendown detect IRQ */
+	int pd_irqf;           /** IRQ flags for pen down IRQ */
 };
 
 enum wm831x_watchdog_action {
diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h
index e786fe9841e..579b50ca2e0 100644
--- a/include/linux/mfd/wm8350/pmic.h
+++ b/include/linux/mfd/wm8350/pmic.h
@@ -1,5 +1,5 @@
 /*
- * pmic.h  --  Power Managment Driver for Wolfson WM8350 PMIC
+ * pmic.h  --  Power Management Driver for Wolfson WM8350 PMIC
  *
  * Copyright 2007 Wolfson Microelectronics PLC
  *
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 7606d7db96c..6507dde38b1 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -137,7 +137,8 @@ extern unsigned int kobjsize(const void *objp);
 #define VM_RandomReadHint(v)		((v)->vm_flags & VM_RAND_READ)
 
 /*
- * special vmas that are non-mergable, non-mlock()able
+ * Special vmas that are non-mergable, non-mlock()able.
+ * Note: mm/huge_memory.c VM_NO_THP depends on this definition.
  */
 #define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP)
 
@@ -608,7 +609,7 @@ static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
 #endif
 
 /*
- * Define the bit shifts to access each section.  For non-existant
+ * Define the bit shifts to access each section.  For non-existent
  * sections we define the shift as 0; that plus a 0 mask ensures
  * the compiler will optimise away reference to them.
  */
@@ -1010,11 +1011,33 @@ int set_page_dirty_lock(struct page *page);
 int clear_page_dirty_for_io(struct page *page);
 
 /* Is the vma a continuation of the stack vma above it? */
-static inline int vma_stack_continue(struct vm_area_struct *vma, unsigned long addr)
+static inline int vma_growsdown(struct vm_area_struct *vma, unsigned long addr)
 {
 	return vma && (vma->vm_end == addr) && (vma->vm_flags & VM_GROWSDOWN);
 }
 
+static inline int stack_guard_page_start(struct vm_area_struct *vma,
+					     unsigned long addr)
+{
+	return (vma->vm_flags & VM_GROWSDOWN) &&
+		(vma->vm_start == addr) &&
+		!vma_growsdown(vma->vm_prev, addr);
+}
+
+/* Is the vma a continuation of the stack vma below it? */
+static inline int vma_growsup(struct vm_area_struct *vma, unsigned long addr)
+{
+	return vma && (vma->vm_start == addr) && (vma->vm_flags & VM_GROWSUP);
+}
+
+static inline int stack_guard_page_end(struct vm_area_struct *vma,
+					   unsigned long addr)
+{
+	return (vma->vm_flags & VM_GROWSUP) &&
+		(vma->vm_end == addr) &&
+		!vma_growsup(vma->vm_next, addr);
+}
+
 extern unsigned long move_page_tables(struct vm_area_struct *vma,
 		unsigned long old_addr, struct vm_area_struct *new_vma,
 		unsigned long new_addr, unsigned long len);
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index c0207a77047..bdd7ceeb99e 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -98,7 +98,7 @@ struct mmc_data;
  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
  * interrupts must be disabled and @data_status updated with a
  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
  * bytes_xfered field of @data must be written. This is ensured by
  * using barriers.
@@ -172,7 +172,7 @@ struct dw_mci_dma_ops {
 #define DW_MCI_QUIRK_IDMAC_DTO			BIT(0)
 /* delay needed between retries on some 2.11a implementations */
 #define DW_MCI_QUIRK_RETRY_DELAY		BIT(1)
-/* High Speed Capable - Supports HS cards (upto 50MHz) */
+/* High Speed Capable - Supports HS cards (up to 50MHz) */
 #define DW_MCI_QUIRK_HIGHSPEED			BIT(2)
 /* Unreliable card detection */
 #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION	BIT(3)
diff --git a/include/linux/module.h b/include/linux/module.h
index 5de42043dff..d9ca2d5dc6d 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -64,6 +64,9 @@ struct module_version_attribute {
 	const char *version;
 } __attribute__ ((__aligned__(sizeof(void *))));
 
+extern ssize_t __modver_version_show(struct module_attribute *,
+				     struct module *, char *);
+
 struct module_kobject
 {
 	struct kobject kobj;
@@ -172,12 +175,7 @@ extern struct module __this_module;
 #define MODULE_VERSION(_version) MODULE_INFO(version, _version)
 #else
 #define MODULE_VERSION(_version)					\
-	extern ssize_t __modver_version_show(struct module_attribute *,	\
-					     struct module *, char *);	\
-	static struct module_version_attribute __modver_version_attr	\
-	__used								\
-    __attribute__ ((__section__ ("__modver"),aligned(sizeof(void *)))) \
-	= {								\
+	static struct module_version_attribute ___modver_attr = {	\
 		.mattr	= {						\
 			.attr	= {					\
 				.name	= "version",			\
@@ -187,7 +185,10 @@ extern struct module __this_module;
 		},							\
 		.module_name	= KBUILD_MODNAME,			\
 		.version	= _version,				\
-	}
+	};								\
+	static const struct module_version_attribute			\
+	__used __attribute__ ((__section__ ("__modver")))		\
+	* __moduleparam_const __modver_attr = &___modver_attr
 #endif
 
 /* Optional firmware file (or files) needed by the module
@@ -223,7 +224,7 @@ struct module_use {
 	extern void *__crc_##sym __attribute__((weak));		\
 	static const unsigned long __kcrctab_##sym		\
 	__used							\
-	__attribute__((section("__kcrctab" sec), unused))	\
+	__attribute__((section("___kcrctab" sec "+" #sym), unused))	\
 	= (unsigned long) &__crc_##sym;
 #else
 #define __CRC_SYMBOL(sym, sec)
@@ -238,7 +239,7 @@ struct module_use {
 	= MODULE_SYMBOL_PREFIX #sym;                    	\
 	static const struct kernel_symbol __ksymtab_##sym	\
 	__used							\
-	__attribute__((section("__ksymtab" sec), unused))	\
+	__attribute__((section("___ksymtab" sec "+" #sym), unused))	\
 	= { (unsigned long)&sym, __kstrtab_##sym }
 
 #define EXPORT_SYMBOL(sym)					\
@@ -367,34 +368,35 @@ struct module
 	struct module_notes_attrs *notes_attrs;
 #endif
 
+	/* The command line arguments (may be mangled).  People like
+	   keeping pointers to this stuff */
+	char *args;
+
 #ifdef CONFIG_SMP
 	/* Per-cpu data. */
 	void __percpu *percpu;
 	unsigned int percpu_size;
 #endif
 
-	/* The command line arguments (may be mangled).  People like
-	   keeping pointers to this stuff */
-	char *args;
 #ifdef CONFIG_TRACEPOINTS
-	struct tracepoint * const *tracepoints_ptrs;
 	unsigned int num_tracepoints;
+	struct tracepoint * const *tracepoints_ptrs;
 #endif
 #ifdef HAVE_JUMP_LABEL
 	struct jump_entry *jump_entries;
 	unsigned int num_jump_entries;
 #endif
 #ifdef CONFIG_TRACING
-	const char **trace_bprintk_fmt_start;
 	unsigned int num_trace_bprintk_fmt;
+	const char **trace_bprintk_fmt_start;
 #endif
 #ifdef CONFIG_EVENT_TRACING
 	struct ftrace_event_call **trace_events;
 	unsigned int num_trace_events;
 #endif
 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
-	unsigned long *ftrace_callsites;
 	unsigned int num_ftrace_callsites;
+	unsigned long *ftrace_callsites;
 #endif
 
 #ifdef CONFIG_MODULE_UNLOAD
@@ -475,8 +477,9 @@ const struct kernel_symbol *find_symbol(const char *name,
 					bool warn);
 
 /* Walk the exported symbol table */
-bool each_symbol(bool (*fn)(const struct symsearch *arr, struct module *owner,
-			    unsigned int symnum, void *data), void *data);
+bool each_symbol_section(bool (*fn)(const struct symsearch *arr,
+				    struct module *owner,
+				    void *data), void *data);
 
 /* Returns 0 and fills in value, defined and namebuf, or -ERANGE if
    symnum out of range. */
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 07b41951e3f..ddaae98c53f 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -67,9 +67,9 @@ struct kparam_string {
 struct kparam_array
 {
 	unsigned int max;
+	unsigned int elemsize;
 	unsigned int *num;
 	const struct kernel_param_ops *ops;
-	unsigned int elemsize;
 	void *elem;
 };
 
@@ -371,8 +371,9 @@ extern int param_get_invbool(char *buffer, const struct kernel_param *kp);
  */
 #define module_param_array_named(name, array, type, nump, perm)		\
 	static const struct kparam_array __param_arr_##name		\
-	= { ARRAY_SIZE(array), nump, &param_ops_##type,			\
-	    sizeof(array[0]), array };					\
+	= { .max = ARRAY_SIZE(array), .num = nump,                      \
+	    .ops = &param_ops_##type,					\
+	    .elemsize = sizeof(array[0]), .elem = array };		\
 	__module_param_call(MODULE_PARAM_PREFIX, name,			\
 			    &param_array_ops,				\
 			    .arr = &__param_arr_##name,			\
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index b21d567692b..46caaf44339 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -244,6 +244,7 @@ struct mfc_cache {
 #ifdef __KERNEL__
 struct rtmsg;
 extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
+			  __be32 saddr, __be32 daddr,
 			  struct rtmsg *rtm, int nowait);
 #endif
 
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 9d2deb200f5..a3759cb0ac1 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -249,7 +249,7 @@ static inline int ip6mr_sk_done(struct sock *sk)
  * Structure used to communicate from kernel to multicast router.
  * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
  * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on wich an application will only receiver the payload i.e the data after
+ * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
  * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
  */
 
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 0d823f2dd66..d2492549297 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -308,7 +308,7 @@ static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
 	
 	addr = (cmd_ofs * type) * interleave;
 
-	/* Modify the unlock address if we are in compatiblity mode.
+	/* Modify the unlock address if we are in compatibility mode.
 	 * For 16bit devices on 8 bit busses
 	 * and 32bit devices on 16 bit busses
 	 * set the low bit of the alternating bit sequence of the address.
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index ae67ef56a8f..d44192740f6 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -416,9 +416,9 @@ struct nand_buffers {
  * @select_chip:	[REPLACEABLE] select chip nr
  * @block_bad:		[REPLACEABLE] check, if the block is bad
  * @block_markbad:	[REPLACEABLE] mark the block bad
- * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific funtion for controlling
+ * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
  *			ALE/CLE/nCE. Also used to write command and address
- * @init_size:		[BOARDSPECIFIC] hardwarespecific funtion for setting
+ * @init_size:		[BOARDSPECIFIC] hardwarespecific function for setting
  *			mtd->oobsize, mtd->writesize and so on.
  *			@id_data contains the 8 bytes values of NAND_CMD_READID.
  *			Return with the bus width.
@@ -437,7 +437,7 @@ struct nand_buffers {
  * @erase_cmd:		[INTERN] erase command write function, selectable due
  *			to AND support.
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
- * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transfering
+ * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
  *			data from array to read regs (tR).
  * @state:		[INTERN] the current state of the NAND device
  * @oob_poi:		poison value buffer
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index 36efcba15ec..abed4dec5c2 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -51,7 +51,7 @@
  * 	return in usecs the elapsed timebetween now and the reference x as
  * 	returned by xip_currtime().
  *
- * 	note 1: convertion to usec can be approximated, as long as the
+ * 	note 1: conversion to usec can be approximated, as long as the
  * 		returned value is <= the real elapsed time.
  * 	note 2: this should be able to cope with a few seconds without
  * 		overflowing.
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 94b48bd40dd..c75471db576 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -51,7 +51,7 @@ struct mutex {
 	spinlock_t		wait_lock;
 	struct list_head	wait_list;
 #if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_SMP)
-	struct thread_info	*owner;
+	struct task_struct	*owner;
 #endif
 #ifdef CONFIG_DEBUG_MUTEXES
 	const char 		*name;
diff --git a/include/linux/net.h b/include/linux/net.h
index 94de83c0f87..1da55e9b6f0 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -42,6 +42,7 @@
 #define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
 #define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
 #define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
+#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
 
 typedef enum {
 	SS_FREE = 0,			/* not allocated		*/
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 0249fe7e387..ca333e79e10 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1020,9 +1020,6 @@ struct net_device {
 	 *	part of the usual set specified in Space.c.
 	 */
 
-	unsigned char		if_port;	/* Selectable AUI, TP,..*/
-	unsigned char		dma;		/* DMA channel		*/
-
 	unsigned long		state;
 
 	struct list_head	dev_list;
@@ -1035,7 +1032,7 @@ struct net_device {
 	u32			hw_features;
 	/* user-requested features */
 	u32			wanted_features;
-	/* VLAN feature mask */
+	/* mask of features inheritable by VLAN devices */
 	u32			vlan_features;
 
 	/* Net device feature bits; if you change something,
@@ -1066,6 +1063,8 @@ struct net_device {
 #define NETIF_F_NTUPLE		(1 << 27) /* N-tuple filters supported */
 #define NETIF_F_RXHASH		(1 << 28) /* Receive hashing offload */
 #define NETIF_F_RXCSUM		(1 << 29) /* Receive checksumming offload */
+#define NETIF_F_NOCACHE_COPY	(1 << 30) /* Use no-cache copyfromuser */
+#define NETIF_F_LOOPBACK	(1 << 31) /* Enable loopback */
 
 	/* Segmentation offload features */
 #define NETIF_F_GSO_SHIFT	16
@@ -1079,9 +1078,9 @@ struct net_device {
 
 	/* Features valid for ethtool to change */
 	/* = all defined minus driver/device-class-related */
-#define NETIF_F_NEVER_CHANGE	(NETIF_F_HIGHDMA | NETIF_F_VLAN_CHALLENGED | \
+#define NETIF_F_NEVER_CHANGE	(NETIF_F_VLAN_CHALLENGED | \
 				  NETIF_F_LLTX | NETIF_F_NETNS_LOCAL)
-#define NETIF_F_ETHTOOL_BITS	(0x3f3fffff & ~NETIF_F_NEVER_CHANGE)
+#define NETIF_F_ETHTOOL_BITS	(0xff3fffff & ~NETIF_F_NEVER_CHANGE)
 
 	/* List of features with software fallbacks. */
 #define NETIF_F_GSO_SOFTWARE	(NETIF_F_TSO | NETIF_F_TSO_ECN | \
@@ -1095,9 +1094,14 @@ struct net_device {
 
 #define NETIF_F_ALL_TSO 	(NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
 
+#define NETIF_F_ALL_FCOE	(NETIF_F_FCOE_CRC | NETIF_F_FCOE_MTU | \
+				 NETIF_F_FSO)
+
 #define NETIF_F_ALL_TX_OFFLOADS	(NETIF_F_ALL_CSUM | NETIF_F_SG | \
 				 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
-				 NETIF_F_SCTP_CSUM | NETIF_F_FCOE_CRC)
+				 NETIF_F_HIGHDMA | \
+				 NETIF_F_SCTP_CSUM | \
+				 NETIF_F_ALL_FCOE)
 
 	/*
 	 * If one device supports one of these features, then enable them
@@ -1105,7 +1109,12 @@ struct net_device {
 	 */
 #define NETIF_F_ONE_FOR_ALL	(NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \
 				 NETIF_F_SG | NETIF_F_HIGHDMA |		\
-				 NETIF_F_FRAGLIST)
+				 NETIF_F_FRAGLIST | NETIF_F_VLAN_CHALLENGED)
+	/*
+	 * If one device doesn't support one of these features, then disable it
+	 * for all in netdev_increment_features.
+	 */
+#define NETIF_F_ALL_FOR_ALL	(NETIF_F_NOCACHE_COPY | NETIF_F_FSO)
 
 	/* changeable features with no special hardware requirements */
 #define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO | NETIF_F_GRO)
@@ -1134,13 +1143,16 @@ struct net_device {
 	const struct header_ops *header_ops;
 
 	unsigned int		flags;	/* interface flags (a la BSD)	*/
+	unsigned int		priv_flags; /* Like 'flags' but invisible to userspace. */
 	unsigned short		gflags;
-        unsigned int            priv_flags; /* Like 'flags' but invisible to userspace. */
 	unsigned short		padded;	/* How much padding added by alloc_netdev() */
 
 	unsigned char		operstate; /* RFC2863 operstate */
 	unsigned char		link_mode; /* mapping policy to operstate */
 
+	unsigned char		if_port;	/* Selectable AUI, TP,..*/
+	unsigned char		dma;		/* DMA channel		*/
+
 	unsigned int		mtu;	/* interface MTU value		*/
 	unsigned short		type;	/* interface hardware type	*/
 	unsigned short		hard_header_len;	/* hardware hdr length	*/
@@ -1281,7 +1293,9 @@ struct net_device {
 	       NETREG_UNREGISTERED,	/* completed unregister todo */
 	       NETREG_RELEASED,		/* called free_netdev */
 	       NETREG_DUMMY,		/* dummy device for NAPI poll */
-	} reg_state:16;
+	} reg_state:8;
+
+	bool dismantle; /* device is going do be freed */
 
 	enum {
 		RTNL_LINK_INITIALIZED,
@@ -2513,6 +2527,7 @@ extern struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev,
 extern int		netdev_max_backlog;
 extern int		netdev_tstamp_prequeue;
 extern int		weight_p;
+extern int		bpf_jit_enable;
 extern int		netdev_set_master(struct net_device *dev, struct net_device *master);
 extern int netdev_set_bond_master(struct net_device *dev,
 				  struct net_device *master);
@@ -2550,7 +2565,9 @@ static inline u32 netdev_get_wanted_features(struct net_device *dev)
 }
 u32 netdev_increment_features(u32 all, u32 one, u32 mask);
 u32 netdev_fix_features(struct net_device *dev, u32 features);
+int __netdev_update_features(struct net_device *dev);
 void netdev_update_features(struct net_device *dev);
+void netdev_change_features(struct net_device *dev);
 
 void netif_stacked_transfer_operstate(const struct net_device *rootdev,
 					struct net_device *dev);
@@ -2588,13 +2605,8 @@ static inline int netif_is_bond_slave(struct net_device *dev)
 
 extern struct pernet_operations __net_initdata loopback_net_ops;
 
-static inline int dev_ethtool_get_settings(struct net_device *dev,
-					   struct ethtool_cmd *cmd)
-{
-	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
-		return -EOPNOTSUPP;
-	return dev->ethtool_ops->get_settings(dev, cmd);
-}
+int dev_ethtool_get_settings(struct net_device *dev,
+			     struct ethtool_cmd *cmd);
 
 static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
 {
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index eeec00abb66..7fa95df6014 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -270,7 +270,8 @@ struct nf_afinfo {
 					    unsigned int dataoff,
 					    unsigned int len,
 					    u_int8_t protocol);
-	int		(*route)(struct dst_entry **dst, struct flowi *fl);
+	int		(*route)(struct net *net, struct dst_entry **dst,
+				 struct flowi *fl, bool strict);
 	void		(*saveroute)(const struct sk_buff *skb,
 				     struct nf_queue_entry *entry);
 	int		(*reroute)(struct sk_buff *skb,
diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h
index ec333d83f3b..5a262e3ae71 100644
--- a/include/linux/netfilter/ipset/ip_set.h
+++ b/include/linux/netfilter/ipset/ip_set.h
@@ -293,7 +293,7 @@ struct ip_set {
 	/* Lock protecting the set data */
 	rwlock_t lock;
 	/* References to the set */
-	atomic_t ref;
+	u32 ref;
 	/* The core set type */
 	struct ip_set_type *type;
 	/* The type variant doing the real job */
diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h
index ec9d9bea1e3..a0196ac7905 100644
--- a/include/linux/netfilter/ipset/ip_set_ahash.h
+++ b/include/linux/netfilter/ipset/ip_set_ahash.h
@@ -515,8 +515,7 @@ type_pf_head(struct ip_set *set, struct sk_buff *skb)
 	if (h->netmask != HOST_MASK)
 		NLA_PUT_U8(skb, IPSET_ATTR_NETMASK, h->netmask);
 #endif
-	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES,
-		      htonl(atomic_read(&set->ref) - 1));
+	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1));
 	NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE, htonl(memsize));
 	if (with_timeout(h->timeout))
 		NLA_PUT_NET32(skb, IPSET_ATTR_TIMEOUT, htonl(h->timeout));
diff --git a/include/linux/netfilter/ipset/ip_set_getport.h b/include/linux/netfilter/ipset/ip_set_getport.h
index 5aebd170f89..90d09300e95 100644
--- a/include/linux/netfilter/ipset/ip_set_getport.h
+++ b/include/linux/netfilter/ipset/ip_set_getport.h
@@ -22,7 +22,9 @@ static inline bool ip_set_proto_with_ports(u8 proto)
 {
 	switch (proto) {
 	case IPPROTO_TCP:
+	case IPPROTO_SCTP:
 	case IPPROTO_UDP:
+	case IPPROTO_UDPLITE:
 		return true;
 	}
 	return false;
diff --git a/include/linux/netfilter/nf_conntrack_proto_gre.h b/include/linux/netfilter/nf_conntrack_proto_gre.h
index 2a10efda17f..6a0664c0c45 100644
--- a/include/linux/netfilter/nf_conntrack_proto_gre.h
+++ b/include/linux/netfilter/nf_conntrack_proto_gre.h
@@ -60,7 +60,7 @@ struct gre_hdr_pptp {
 	__be16 payload_len;	/* size of ppp payload, not inc. gre header */
 	__be16 call_id;		/* peer's call_id for this session */
 	__be32 seq;		/* sequence number.  Present if S==1 */
-	__be32 ack;		/* seq number of highest packet recieved by */
+	__be32 ack;		/* seq number of highest packet received by */
 				/*  sender in this session */
 };
 
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 37219525ff6..32cddf78b13 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -456,72 +456,60 @@ extern void xt_proto_fini(struct net *net, u_int8_t af);
 extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
 extern void xt_free_table_info(struct xt_table_info *info);
 
-/*
- * Per-CPU spinlock associated with per-cpu table entries, and
- * with a counter for the "reading" side that allows a recursive
- * reader to avoid taking the lock and deadlocking.
- *
- * "reading" is used by ip/arp/ip6 tables rule processing which runs per-cpu.
- * It needs to ensure that the rules are not being changed while the packet
- * is being processed. In some cases, the read lock will be acquired
- * twice on the same CPU; this is okay because of the count.
- *
- * "writing" is used when reading counters.
- *  During replace any readers that are using the old tables have to complete
- *  before freeing the old table. This is handled by the write locking
- *  necessary for reading the counters.
+/**
+ * xt_recseq - recursive seqcount for netfilter use
+ * 
+ * Packet processing changes the seqcount only if no recursion happened
+ * get_counters() can use read_seqcount_begin()/read_seqcount_retry(),
+ * because we use the normal seqcount convention :
+ * Low order bit set to 1 if a writer is active.
  */
-struct xt_info_lock {
-	seqlock_t lock;
-	unsigned char readers;
-};
-DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks);
+DECLARE_PER_CPU(seqcount_t, xt_recseq);
 
-/*
- * Note: we need to ensure that preemption is disabled before acquiring
- * the per-cpu-variable, so we do it as a two step process rather than
- * using "spin_lock_bh()".
- *
- * We _also_ need to disable bottom half processing before updating our
- * nesting count, to make sure that the only kind of re-entrancy is this
- * code being called by itself: since the count+lock is not an atomic
- * operation, we can allow no races.
+/**
+ * xt_write_recseq_begin - start of a write section
  *
- * _Only_ that special combination of being per-cpu and never getting
- * re-entered asynchronously means that the count is safe.
+ * Begin packet processing : all readers must wait the end
+ * 1) Must be called with preemption disabled
+ * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add())
+ * Returns :
+ *  1 if no recursion on this cpu
+ *  0 if recursion detected
  */
-static inline void xt_info_rdlock_bh(void)
+static inline unsigned int xt_write_recseq_begin(void)
 {
-	struct xt_info_lock *lock;
+	unsigned int addend;
 
-	local_bh_disable();
-	lock = &__get_cpu_var(xt_info_locks);
-	if (likely(!lock->readers++))
-		write_seqlock(&lock->lock);
-}
+	/*
+	 * Low order bit of sequence is set if we already
+	 * called xt_write_recseq_begin().
+	 */
+	addend = (__this_cpu_read(xt_recseq.sequence) + 1) & 1;
 
-static inline void xt_info_rdunlock_bh(void)
-{
-	struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
+	/*
+	 * This is kind of a write_seqcount_begin(), but addend is 0 or 1
+	 * We dont check addend value to avoid a test and conditional jump,
+	 * since addend is most likely 1
+	 */
+	__this_cpu_add(xt_recseq.sequence, addend);
+	smp_wmb();
 
-	if (likely(!--lock->readers))
-		write_sequnlock(&lock->lock);
-	local_bh_enable();
+	return addend;
 }
 
-/*
- * The "writer" side needs to get exclusive access to the lock,
- * regardless of readers.  This must be called with bottom half
- * processing (and thus also preemption) disabled.
+/**
+ * xt_write_recseq_end - end of a write section
+ * @addend: return value from previous xt_write_recseq_begin()
+ *
+ * End packet processing : all readers can proceed
+ * 1) Must be called with preemption disabled
+ * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add())
  */
-static inline void xt_info_wrlock(unsigned int cpu)
-{
-	write_seqlock(&per_cpu(xt_info_locks, cpu).lock);
-}
-
-static inline void xt_info_wrunlock(unsigned int cpu)
+static inline void xt_write_recseq_end(unsigned int addend)
 {
-	write_sequnlock(&per_cpu(xt_info_locks, cpu).lock);
+	/* this is kind of a write_seqcount_end(), but addend is 0 or 1 */
+	smp_wmb();
+	__this_cpu_add(xt_recseq.sequence, addend);
 }
 
 /*
diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
index 1c6f0c5f530..8797ed16feb 100644
--- a/include/linux/netfilter_bridge/ebtables.h
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -92,7 +92,7 @@ struct ebt_entries {
 
 /* This is a hack to make a difference between an ebt_entry struct and an
  * ebt_entries struct when traversing the entries from start to end.
- * Using this simplifies the code alot, while still being able to use
+ * Using this simplifies the code a lot, while still being able to use
  * ebt_entries.
  * Contrary, iptables doesn't use something like ebt_entries and therefore uses
  * different techniques for naming the policy and such. So, iptables doesn't
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index b528f6d4b86..178fafe0ff9 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -359,7 +359,7 @@ enum nfsstat4 {
 						/* Error 10073 is unused. */
 	NFS4ERR_CLIENTID_BUSY	= 10074,	/* clientid has state */
 	NFS4ERR_PNFS_IO_HOLE	= 10075,	/* IO to _SPARSE file hole */
-	NFS4ERR_SEQ_FALSE_RETRY	= 10076,	/* retry not origional */
+	NFS4ERR_SEQ_FALSE_RETRY	= 10076,	/* retry not original */
 	NFS4ERR_BAD_HIGH_SLOT	= 10077,	/* sequence arg bad */
 	NFS4ERR_DEADSESSION	= 10078,	/* persistent session dead */
 	NFS4ERR_ENCR_ALG_UNSUPP = 10079,	/* SSV alg mismatch */
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index 216cea5db0a..87694ca8691 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -47,6 +47,7 @@ struct nfs_client {
 
 #ifdef CONFIG_NFS_V4
 	u64			cl_clientid;	/* constant */
+	nfs4_verifier		cl_confirm;	/* Clientid verifier */
 	unsigned long		cl_state;
 
 	spinlock_t		cl_lock;
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 78b101e487e..7e371f7df9c 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -50,6 +50,7 @@ struct nfs_fattr {
 	} du;
 	struct nfs_fsid		fsid;
 	__u64			fileid;
+	__u64			mounted_on_fileid;
 	struct timespec		atime;
 	struct timespec		mtime;
 	struct timespec		ctime;
@@ -83,6 +84,7 @@ struct nfs_fattr {
 #define NFS_ATTR_FATTR_PRECHANGE	(1U << 18)
 #define NFS_ATTR_FATTR_V4_REFERRAL	(1U << 19)	/* NFSv4 referral */
 #define NFS_ATTR_FATTR_MOUNTPOINT	(1U << 20)	/* Treat as mountpoint */
+#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID		(1U << 21)
 
 #define NFS_ATTR_FATTR (NFS_ATTR_FATTR_TYPE \
 		| NFS_ATTR_FATTR_MODE \
@@ -231,6 +233,7 @@ struct nfs4_layoutget {
 	struct nfs4_layoutget_args args;
 	struct nfs4_layoutget_res res;
 	struct pnfs_layout_segment **lsegpp;
+	gfp_t gfp_flags;
 };
 
 struct nfs4_getdeviceinfo_args {
diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h
index bd316159278..84058ec6939 100644
--- a/include/linux/nfsd/export.h
+++ b/include/linux/nfsd/export.h
@@ -80,7 +80,7 @@ struct nfsd4_fs_locations {
 
 /*
  * We keep an array of pseudoflavors with the export, in order from most
- * to least preferred.  For the forseeable future, we don't expect more
+ * to least preferred.  For the foreseeable future, we don't expect more
  * than the eight pseudoflavors null, unix, krb5, krb5i, krb5p, skpm3,
  * spkm3i, and spkm3p (and using all 8 at once should be rare).
  */
diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h
index 80d55bbc536..f76d80ccec1 100644
--- a/include/linux/nfsd/nfsfh.h
+++ b/include/linux/nfsd/nfsfh.h
@@ -49,7 +49,7 @@ struct nfs_fhbase_old {
  *
  * The auth_type field specifies how the filehandle can be authenticated
  * This might allow a file to be confirmed to be in a writable part of a
- * filetree without checking the path from it upto the root.
+ * filetree without checking the path from it up to the root.
  * Current values:
  *     0  - No authentication.  fb_auth is 0 bytes long
  * Possible future values:
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index fc3a94821b1..c7ccaae15af 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -487,7 +487,7 @@
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
 enum nl80211_commands {
-/* don't change the order or add anything inbetween, this is ABI! */
+/* don't change the order or add anything between, this is ABI! */
 	NL80211_CMD_UNSPEC,
 
 	NL80211_CMD_GET_WIPHY,		/* can dump */
@@ -944,7 +944,7 @@ enum nl80211_commands {
  *	This can be used to mask out antennas which are not attached or should
  *	not be used for receiving. If an antenna is not selected in this bitmap
  *	the hardware should not be configured to receive on this antenna.
- *	For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
  *
  * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
  *	for configuration as TX antennas via the above parameters.
@@ -1000,7 +1000,7 @@ enum nl80211_commands {
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_attrs {
-/* don't change the order or add anything inbetween, this is ABI! */
+/* don't change the order or add anything between, this is ABI! */
 	NL80211_ATTR_UNSPEC,
 
 	NL80211_ATTR_WIPHY,
@@ -1579,7 +1579,7 @@ enum nl80211_bitrate_attr {
  * 	802.11 country information element with regulatory information it
  * 	thinks we should consider. cfg80211 only processes the country
  *	code from the IE, and relies on the regulatory domain information
- *	structure pased by userspace (CRDA) from our wireless-regdb.
+ *	structure passed by userspace (CRDA) from our wireless-regdb.
  *	If a channel is enabled but the country code indicates it should
  *	be disabled we disable the channel and re-enable it upon disassociation.
  */
@@ -1758,7 +1758,7 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
  * millisecond units, used by the Peer Link Open message
  *
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
  * millisecond units, used by the peer link management to close a peer link
  *
  * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 2026f9e1ceb..621dfa16acc 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -237,7 +237,7 @@ static inline int notifier_to_errno(int ret)
 					* enabling interrupts. Must not sleep,
 					* must not fail */
 
-/* Used for CPU hotplug events occuring while tasks are frozen due to a suspend
+/* Used for CPU hotplug events occurring while tasks are frozen due to a suspend
  * operation in progress
  */
 #define CPU_TASKS_FROZEN	0x0010
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 8bfe6c1d436..ae5638480ef 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -21,8 +21,7 @@ extern void of_device_make_bus_id(struct device *dev);
 static inline int of_driver_match_device(struct device *dev,
 					 const struct device_driver *drv)
 {
-	dev->of_match = of_match_device(drv->of_match_table, dev);
-	return dev->of_match != NULL;
+	return of_match_device(drv->of_match_table, dev) != NULL;
 }
 
 extern struct platform_device *of_dev_get(struct platform_device *dev);
@@ -58,6 +57,11 @@ static inline int of_device_uevent(struct device *dev,
 
 static inline void of_device_node_put(struct device *dev) { }
 
+static inline const struct of_device_id *of_match_device(
+		const struct of_device_id *matches, const struct device *dev)
+{
+	return NULL;
+}
 #endif /* CONFIG_OF_DEVICE */
 
 #endif /* _LINUX_OF_DEVICE_H */
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index 109e013b177..e6955f5d1f0 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -68,6 +68,7 @@ extern int of_irq_to_resource(struct device_node *dev, int index,
 extern int of_irq_count(struct device_node *dev);
 extern int of_irq_to_resource_table(struct device_node *dev,
 		struct resource *res, int nr_irqs);
+extern struct device_node *of_irq_find_parent(struct device_node *child);
 
 #endif /* CONFIG_OF_IRQ */
 #endif /* CONFIG_OF */
diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h
index 150822b4dbf..b6111f8cd49 100644
--- a/include/linux/omap3isp.h
+++ b/include/linux/omap3isp.h
@@ -250,7 +250,7 @@ enum omap3isp_h3a_af_rgbpos {
 /* Contains the information regarding the Horizontal Median Filter */
 struct omap3isp_h3a_af_hmf {
 	__u8 enable;	/* Status of Horizontal Median Filter */
-	__u8 threshold;	/* Threshhold Value for Horizontal Median Filter */
+	__u8 threshold;	/* Threshold Value for Horizontal Median Filter */
 };
 
 /* Contains the information regarding the IIR Filters */
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index f5de21de31d..961ecc7d30b 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -138,7 +138,7 @@ static inline void move_unlock_page_cgroup(struct page_cgroup *pc,
 
 #define PCG_ARRAYID_OFFSET	(BITS_PER_LONG - PCG_ARRAYID_WIDTH)
 /*
- * Zero the shift count for non-existant fields, to prevent compiler
+ * Zero the shift count for non-existent fields, to prevent compiler
  * warnings and ensure references are optimized away.
  */
 #define PCG_ARRAYID_SHIFT	(PCG_ARRAYID_OFFSET * (PCG_ARRAYID_WIDTH != 0))
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
new file mode 100644
index 00000000000..655824fa4c7
--- /dev/null
+++ b/include/linux/pci-ats.h
@@ -0,0 +1,52 @@
+#ifndef LINUX_PCI_ATS_H
+#define LINUX_PCI_ATS_H
+
+/* Address Translation Service */
+struct pci_ats {
+	int pos;        /* capability position */
+	int stu;        /* Smallest Translation Unit */
+	int qdep;       /* Invalidate Queue Depth */
+	int ref_cnt;    /* Physical Function reference count */
+	unsigned int is_enabled:1;      /* Enable bit is set */
+};
+
+#ifdef CONFIG_PCI_IOV
+
+extern int pci_enable_ats(struct pci_dev *dev, int ps);
+extern void pci_disable_ats(struct pci_dev *dev);
+extern int pci_ats_queue_depth(struct pci_dev *dev);
+/**
+ * pci_ats_enabled - query the ATS status
+ * @dev: the PCI device
+ *
+ * Returns 1 if ATS capability is enabled, or 0 if not.
+ */
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return dev->ats && dev->ats->is_enabled;
+}
+
+#else /* CONFIG_PCI_IOV */
+
+static inline int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+	return -ENODEV;
+}
+
+static inline void pci_disable_ats(struct pci_dev *dev)
+{
+}
+
+static inline int pci_ats_queue_depth(struct pci_dev *dev)
+{
+	return -ENODEV;
+}
+
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PCI_IOV */
+
+#endif /* LINUX_PCI_ATS_H*/
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 11fd38151cc..8652a4fa3fe 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -518,7 +518,7 @@
 #define PCI_DEVICE_ID_AMD_11H_NB_MISC	0x1303
 #define PCI_DEVICE_ID_AMD_11H_NB_LINK	0x1304
 #define PCI_DEVICE_ID_AMD_15H_NB_F3	0x1603
-#define PCI_DEVICE_ID_AMD_15H_NB_LINK	0x1604
+#define PCI_DEVICE_ID_AMD_15H_NB_F4	0x1604
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
 #define PCI_DEVICE_ID_AMD_LANCE		0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
@@ -608,6 +608,8 @@
 #define PCI_DEVICE_ID_MATROX_G550	0x2527
 #define PCI_DEVICE_ID_MATROX_VIA	0x4536
 
+#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS	0x14f2
+
 #define PCI_VENDOR_ID_CT		0x102c
 #define PCI_DEVICE_ID_CT_69000		0x00c0
 #define PCI_DEVICE_ID_CT_65545		0x00d8
@@ -2477,15 +2479,12 @@
 #define PCI_DEVICE_ID_INTEL_82840_HB	0x1a21
 #define PCI_DEVICE_ID_INTEL_82845_HB	0x1a30
 #define PCI_DEVICE_ID_INTEL_IOAT	0x1a38
-#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN	0x1c41
 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX	0x1c5f
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0	0x1d40
 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1	0x1d41
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN	0x2310
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX	0x231f
-#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
 #define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
 #define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
@@ -2696,7 +2695,6 @@
 #define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN	0x3b00
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX	0x3b1f
-#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
 #define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
 #define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 5b7e6b1ba54..be01380f798 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -223,7 +223,7 @@
 #define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
 #define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
 #define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
-#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxilliary power support mask */
+#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxiliary power support mask */
 #define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
 #define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
 #define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
@@ -435,7 +435,7 @@
 #define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
 #define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
 #define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
-#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Suprise Down Error Reporting Capable */
+#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
 #define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
 #define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
 #define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 3a5c4449fd3..8b97308e65d 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -948,7 +948,7 @@ do {									\
 	irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
 # endif
 # define irqsafe_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	__pcpu_double_call_return_int(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
+	__pcpu_double_call_return_bool(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
 #endif
 
 #endif /* __LINUX_PERCPU_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 311b4dc785a..3412684ce5d 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -2,8 +2,8 @@
  * Performance events:
  *
  *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
- *    Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar
- *    Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
  *
  * Data type definitions, declarations, prototypes.
  *
@@ -52,6 +52,8 @@ enum perf_hw_id {
 	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
 	PERF_COUNT_HW_BRANCH_MISSES		= 5,
 	PERF_COUNT_HW_BUS_CYCLES		= 6,
+	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
+	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
 
 	PERF_COUNT_HW_MAX,			/* non-ABI */
 };
@@ -468,9 +470,9 @@ enum perf_callchain_context {
 	PERF_CONTEXT_MAX		= (__u64)-4095,
 };
 
-#define PERF_FLAG_FD_NO_GROUP	(1U << 0)
-#define PERF_FLAG_FD_OUTPUT	(1U << 1)
-#define PERF_FLAG_PID_CGROUP	(1U << 2) /* pid=cgroup id, per-cpu mode only */
+#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
+#define PERF_FLAG_FD_OUTPUT		(1U << 1)
+#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
 
 #ifdef __KERNEL__
 /*
@@ -484,9 +486,9 @@ enum perf_callchain_context {
 #endif
 
 struct perf_guest_info_callbacks {
-	int (*is_in_guest) (void);
-	int (*is_user_mode) (void);
-	unsigned long (*get_guest_ip) (void);
+	int				(*is_in_guest)(void);
+	int				(*is_user_mode)(void);
+	unsigned long			(*get_guest_ip)(void);
 };
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
@@ -505,7 +507,7 @@ struct perf_guest_info_callbacks {
 #include <linux/ftrace.h>
 #include <linux/cpu.h>
 #include <linux/irq_work.h>
-#include <linux/jump_label_ref.h>
+#include <linux/jump_label.h>
 #include <asm/atomic.h>
 #include <asm/local.h>
 
@@ -652,19 +654,19 @@ struct pmu {
 	 * Start the transaction, after this ->add() doesn't need to
 	 * do schedulability tests.
 	 */
-	void (*start_txn)	(struct pmu *pmu); /* optional */
+	void (*start_txn)		(struct pmu *pmu); /* optional */
 	/*
 	 * If ->start_txn() disabled the ->add() schedulability test
 	 * then ->commit_txn() is required to perform one. On success
 	 * the transaction is closed. On error the transaction is kept
 	 * open until ->cancel_txn() is called.
 	 */
-	int  (*commit_txn)	(struct pmu *pmu); /* optional */
+	int  (*commit_txn)		(struct pmu *pmu); /* optional */
 	/*
 	 * Will cancel the transaction, assumes ->del() is called
-	 * for each successfull ->add() during the transaction.
+	 * for each successful ->add() during the transaction.
 	 */
-	void (*cancel_txn)	(struct pmu *pmu); /* optional */
+	void (*cancel_txn)		(struct pmu *pmu); /* optional */
 };
 
 /**
@@ -712,15 +714,15 @@ typedef void (*perf_overflow_handler_t)(struct perf_event *, int,
 					struct pt_regs *regs);
 
 enum perf_group_flag {
-	PERF_GROUP_SOFTWARE = 0x1,
+	PERF_GROUP_SOFTWARE		= 0x1,
 };
 
-#define SWEVENT_HLIST_BITS	8
-#define SWEVENT_HLIST_SIZE	(1 << SWEVENT_HLIST_BITS)
+#define SWEVENT_HLIST_BITS		8
+#define SWEVENT_HLIST_SIZE		(1 << SWEVENT_HLIST_BITS)
 
 struct swevent_hlist {
-	struct hlist_head	heads[SWEVENT_HLIST_SIZE];
-	struct rcu_head		rcu_head;
+	struct hlist_head		heads[SWEVENT_HLIST_SIZE];
+	struct rcu_head			rcu_head;
 };
 
 #define PERF_ATTACH_CONTEXT	0x01
@@ -733,13 +735,13 @@ struct swevent_hlist {
  * This is a per-cpu dynamically allocated data structure.
  */
 struct perf_cgroup_info {
-	u64 time;
-	u64 timestamp;
+	u64				time;
+	u64				timestamp;
 };
 
 struct perf_cgroup {
-	struct cgroup_subsys_state css;
-	struct perf_cgroup_info *info;	/* timing info, one per cpu */
+	struct				cgroup_subsys_state css;
+	struct				perf_cgroup_info *info;	/* timing info, one per cpu */
 };
 #endif
 
@@ -923,7 +925,7 @@ struct perf_event_context {
 
 /*
  * Number of contexts where an event can trigger:
- * 	task, softirq, hardirq, nmi.
+ *	task, softirq, hardirq, nmi.
  */
 #define PERF_NR_CONTEXTS	4
 
@@ -1001,8 +1003,7 @@ struct perf_sample_data {
 	struct perf_raw_record		*raw;
 };
 
-static inline
-void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
+static inline void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
 {
 	data->addr = addr;
 	data->raw  = NULL;
@@ -1034,13 +1035,12 @@ static inline int is_software_event(struct perf_event *event)
 	return event->pmu->task_ctx_nr == perf_sw_context;
 }
 
-extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
+extern struct jump_label_key perf_swevent_enabled[PERF_COUNT_SW_MAX];
 
 extern void __perf_sw_event(u32, u64, int, struct pt_regs *, u64);
 
 #ifndef perf_arch_fetch_caller_regs
-static inline void
-perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { }
+static inline void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { }
 #endif
 
 /*
@@ -1063,30 +1063,28 @@ perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
 {
 	struct pt_regs hot_regs;
 
-	JUMP_LABEL(&perf_swevent_enabled[event_id], have_event);
-	return;
-
-have_event:
-	if (!regs) {
-		perf_fetch_caller_regs(&hot_regs);
-		regs = &hot_regs;
+	if (static_branch(&perf_swevent_enabled[event_id])) {
+		if (!regs) {
+			perf_fetch_caller_regs(&hot_regs);
+			regs = &hot_regs;
+		}
+		__perf_sw_event(event_id, nr, nmi, regs, addr);
 	}
-	__perf_sw_event(event_id, nr, nmi, regs, addr);
 }
 
-extern atomic_t perf_sched_events;
+extern struct jump_label_key perf_sched_events;
 
 static inline void perf_event_task_sched_in(struct task_struct *task)
 {
-	COND_STMT(&perf_sched_events, __perf_event_task_sched_in(task));
+	if (static_branch(&perf_sched_events))
+		__perf_event_task_sched_in(task);
 }
 
-static inline
-void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
+static inline void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
 {
 	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
 
-	COND_STMT(&perf_sched_events, __perf_event_task_sched_out(task, next));
+	__perf_event_task_sched_out(task, next);
 }
 
 extern void perf_event_mmap(struct vm_area_struct *vma);
@@ -1100,14 +1098,10 @@ extern void perf_event_fork(struct task_struct *tsk);
 /* Callchains */
 DECLARE_PER_CPU(struct perf_callchain_entry, perf_callchain_entry);
 
-extern void perf_callchain_user(struct perf_callchain_entry *entry,
-				struct pt_regs *regs);
-extern void perf_callchain_kernel(struct perf_callchain_entry *entry,
-				  struct pt_regs *regs);
-
+extern void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs);
+extern void perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs);
 
-static inline void
-perf_callchain_store(struct perf_callchain_entry *entry, u64 ip)
+static inline void perf_callchain_store(struct perf_callchain_entry *entry, u64 ip)
 {
 	if (entry->nr < PERF_MAX_STACK_DEPTH)
 		entry->ip[entry->nr++] = ip;
@@ -1143,9 +1137,9 @@ extern void perf_tp_event(u64 addr, u64 count, void *record,
 extern void perf_bp_event(struct perf_event *event, void *data);
 
 #ifndef perf_misc_flags
-#define perf_misc_flags(regs)	(user_mode(regs) ? PERF_RECORD_MISC_USER : \
-				 PERF_RECORD_MISC_KERNEL)
-#define perf_instruction_pointer(regs)	instruction_pointer(regs)
+# define perf_misc_flags(regs) \
+		(user_mode(regs) ? PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL)
+# define perf_instruction_pointer(regs)	instruction_pointer(regs)
 #endif
 
 extern int perf_output_begin(struct perf_output_handle *handle,
@@ -1180,9 +1174,9 @@ static inline void
 perf_bp_event(struct perf_event *event, void *data)			{ }
 
 static inline int perf_register_guest_info_callbacks
-(struct perf_guest_info_callbacks *callbacks) { return 0; }
+(struct perf_guest_info_callbacks *callbacks)				{ return 0; }
 static inline int perf_unregister_guest_info_callbacks
-(struct perf_guest_info_callbacks *callbacks) { return 0; }
+(struct perf_guest_info_callbacks *callbacks)				{ return 0; }
 
 static inline void perf_event_mmap(struct vm_area_struct *vma)		{ }
 static inline void perf_event_comm(struct task_struct *tsk)		{ }
@@ -1195,23 +1189,22 @@ static inline void perf_event_disable(struct perf_event *event)		{ }
 static inline void perf_event_task_tick(void)				{ }
 #endif
 
-#define perf_output_put(handle, x) \
-	perf_output_copy((handle), &(x), sizeof(x))
+#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
 
 /*
  * This has to have a higher priority than migration_notifier in sched.c.
  */
-#define perf_cpu_notifier(fn)					\
-do {								\
-	static struct notifier_block fn##_nb __cpuinitdata =	\
-		{ .notifier_call = fn, .priority = CPU_PRI_PERF }; \
-	fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE,		\
-		(void *)(unsigned long)smp_processor_id());	\
-	fn(&fn##_nb, (unsigned long)CPU_STARTING,		\
-		(void *)(unsigned long)smp_processor_id());	\
-	fn(&fn##_nb, (unsigned long)CPU_ONLINE,			\
-		(void *)(unsigned long)smp_processor_id());	\
-	register_cpu_notifier(&fn##_nb);			\
+#define perf_cpu_notifier(fn)						\
+do {									\
+	static struct notifier_block fn##_nb __cpuinitdata =		\
+		{ .notifier_call = fn, .priority = CPU_PRI_PERF };	\
+	fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE,			\
+		(void *)(unsigned long)smp_processor_id());		\
+	fn(&fn##_nb, (unsigned long)CPU_STARTING,			\
+		(void *)(unsigned long)smp_processor_id());		\
+	fn(&fn##_nb, (unsigned long)CPU_ONLINE,				\
+		(void *)(unsigned long)smp_processor_id());		\
+	register_cpu_notifier(&fn##_nb);				\
 } while (0)
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/pid.h b/include/linux/pid.h
index efceda0a51b..cdced84261d 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -21,7 +21,7 @@ enum pid_type
  * quickly from the numeric pid value.  The attached processes may be
  * quickly accessed by following pointers from struct pid.
  *
- * Storing pid_t values in the kernel and refering to them later has a
+ * Storing pid_t values in the kernel and referring to them later has a
  * problem.  The process originally with that pid may have exited and the
  * pid allocator wrapped, and another process could have come along
  * and been assigned that pid.
@@ -117,7 +117,7 @@ extern struct pid *find_vpid(int nr);
  */
 extern struct pid *find_get_pid(int nr);
 extern struct pid *find_ge_pid(int nr, struct pid_namespace *);
-int next_pidmap(struct pid_namespace *pid_ns, int last);
+int next_pidmap(struct pid_namespace *pid_ns, unsigned int last);
 
 extern struct pid *alloc_pid(struct pid_namespace *ns);
 extern void free_pid(struct pid *pid);
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index b1032a3fafd..c5336705921 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -223,7 +223,7 @@ struct tc_gred_qopt {
 	__u32		limit;        /* HARD maximal queue length (bytes)    */
 	__u32		qth_min;      /* Min average length threshold (bytes) */
 	__u32		qth_max;      /* Max average length threshold (bytes) */
-	__u32		DP;           /* upto 2^32 DPs */
+	__u32		DP;           /* up to 2^32 DPs */
 	__u32		backlog;
 	__u32		qave;
 	__u32		forced;
@@ -588,4 +588,19 @@ struct tc_sfb_xstats {
 
 #define SFB_MAX_PROB 0xFFFF
 
+/* QFQ */
+enum {
+	TCA_QFQ_UNSPEC,
+	TCA_QFQ_WEIGHT,
+	TCA_QFQ_LMAX,
+	__TCA_QFQ_MAX
+};
+
+#define TCA_QFQ_MAX	(__TCA_QFQ_MAX - 1)
+
+struct tc_qfq_stats {
+	__u32 weight;
+	__u32 lmax;
+};
+
 #endif
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index d96db982570..ede1a80e335 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -14,6 +14,8 @@
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
 
+struct mfd_cell;
+
 struct platform_device {
 	const char	* name;
 	int		id;
@@ -23,6 +25,9 @@ struct platform_device {
 
 	const struct platform_device_id	*id_entry;
 
+	/* MFD cell pointer */
+	struct mfd_cell *mfd_cell;
+
 	/* arch specific additions */
 	struct pdev_archdata	archdata;
 };
@@ -145,9 +150,6 @@ extern struct platform_device *platform_create_bundle(struct platform_driver *dr
 					struct resource *res, unsigned int n_res,
 					const void *data, size_t size);
 
-extern const struct dev_pm_ops * platform_bus_get_pm_ops(void);
-extern void platform_bus_set_pm_ops(const struct dev_pm_ops *pm);
-
 /* early platform driver interface */
 struct early_platform_driver {
 	const char *class_str;
@@ -200,4 +202,64 @@ static inline char *early_platform_driver_setup_func(void)		\
 }
 #endif /* MODULE */
 
+#ifdef CONFIG_PM_SLEEP
+extern int platform_pm_prepare(struct device *dev);
+extern void platform_pm_complete(struct device *dev);
+#else
+#define platform_pm_prepare	NULL
+#define platform_pm_complete	NULL
+#endif
+
+#ifdef CONFIG_SUSPEND
+extern int platform_pm_suspend(struct device *dev);
+extern int platform_pm_suspend_noirq(struct device *dev);
+extern int platform_pm_resume(struct device *dev);
+extern int platform_pm_resume_noirq(struct device *dev);
+#else
+#define platform_pm_suspend		NULL
+#define platform_pm_resume		NULL
+#define platform_pm_suspend_noirq	NULL
+#define platform_pm_resume_noirq	NULL
+#endif
+
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+extern int platform_pm_freeze(struct device *dev);
+extern int platform_pm_freeze_noirq(struct device *dev);
+extern int platform_pm_thaw(struct device *dev);
+extern int platform_pm_thaw_noirq(struct device *dev);
+extern int platform_pm_poweroff(struct device *dev);
+extern int platform_pm_poweroff_noirq(struct device *dev);
+extern int platform_pm_restore(struct device *dev);
+extern int platform_pm_restore_noirq(struct device *dev);
+#else
+#define platform_pm_freeze		NULL
+#define platform_pm_thaw		NULL
+#define platform_pm_poweroff		NULL
+#define platform_pm_restore		NULL
+#define platform_pm_freeze_noirq	NULL
+#define platform_pm_thaw_noirq		NULL
+#define platform_pm_poweroff_noirq	NULL
+#define platform_pm_restore_noirq	NULL
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+#define USE_PLATFORM_PM_SLEEP_OPS \
+	.prepare = platform_pm_prepare, \
+	.complete = platform_pm_complete, \
+	.suspend = platform_pm_suspend, \
+	.resume = platform_pm_resume, \
+	.freeze = platform_pm_freeze, \
+	.thaw = platform_pm_thaw, \
+	.poweroff = platform_pm_poweroff, \
+	.restore = platform_pm_restore, \
+	.suspend_noirq = platform_pm_suspend_noirq, \
+	.resume_noirq = platform_pm_resume_noirq, \
+	.freeze_noirq = platform_pm_freeze_noirq, \
+	.thaw_noirq = platform_pm_thaw_noirq, \
+	.poweroff_noirq = platform_pm_poweroff_noirq, \
+	.restore_noirq = platform_pm_restore_noirq,
+#else
+#define USE_PLATFORM_PM_SLEEP_OPS
+#endif
+
 #endif /* _PLATFORM_DEVICE_H_ */
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 512e09177e5..3160648ccdd 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -460,6 +460,7 @@ struct dev_pm_info {
 	unsigned long		active_jiffies;
 	unsigned long		suspended_jiffies;
 	unsigned long		accounting_timestamp;
+	void			*subsys_data;  /* Owned by the subsystem. */
 #endif
 };
 
@@ -529,21 +530,17 @@ struct dev_power_domain {
  */
 
 #ifdef CONFIG_PM_SLEEP
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-extern int sysdev_suspend(pm_message_t state);
-extern int sysdev_resume(void);
-#else
-static inline int sysdev_suspend(pm_message_t state) { return 0; }
-static inline int sysdev_resume(void) { return 0; }
-#endif
-
 extern void device_pm_lock(void);
 extern void dpm_resume_noirq(pm_message_t state);
 extern void dpm_resume_end(pm_message_t state);
+extern void dpm_resume(pm_message_t state);
+extern void dpm_complete(pm_message_t state);
 
 extern void device_pm_unlock(void);
 extern int dpm_suspend_noirq(pm_message_t state);
 extern int dpm_suspend_start(pm_message_t state);
+extern int dpm_suspend(pm_message_t state);
+extern int dpm_prepare(pm_message_t state);
 
 extern void __suspend_report_result(const char *function, void *fn, int ret);
 
@@ -553,6 +550,16 @@ extern void __suspend_report_result(const char *function, void *fn, int ret);
 	} while (0)
 
 extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
+
+extern int pm_generic_prepare(struct device *dev);
+extern int pm_generic_suspend(struct device *dev);
+extern int pm_generic_resume(struct device *dev);
+extern int pm_generic_freeze(struct device *dev);
+extern int pm_generic_thaw(struct device *dev);
+extern int pm_generic_restore(struct device *dev);
+extern int pm_generic_poweroff(struct device *dev);
+extern void pm_generic_complete(struct device *dev);
+
 #else /* !CONFIG_PM_SLEEP */
 
 #define device_pm_lock() do {} while (0)
@@ -569,6 +576,15 @@ static inline int device_pm_wait_for_dev(struct device *a, struct device *b)
 {
 	return 0;
 }
+
+#define pm_generic_prepare	NULL
+#define pm_generic_suspend	NULL
+#define pm_generic_resume	NULL
+#define pm_generic_freeze	NULL
+#define pm_generic_thaw		NULL
+#define pm_generic_restore	NULL
+#define pm_generic_poweroff	NULL
+#define pm_generic_complete	NULL
 #endif /* !CONFIG_PM_SLEEP */
 
 /* How to reorder dpm_list after device_move() */
@@ -579,11 +595,4 @@ enum dpm_order {
 	DPM_ORDER_DEV_LAST,
 };
 
-extern int pm_generic_suspend(struct device *dev);
-extern int pm_generic_resume(struct device *dev);
-extern int pm_generic_freeze(struct device *dev);
-extern int pm_generic_thaw(struct device *dev);
-extern int pm_generic_restore(struct device *dev);
-extern int pm_generic_poweroff(struct device *dev);
-
 #endif /* _LINUX_PM_H */
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 8de9aa6e7de..878cf84baeb 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -245,4 +245,46 @@ static inline void pm_runtime_dont_use_autosuspend(struct device *dev)
 	__pm_runtime_use_autosuspend(dev, false);
 }
 
+struct pm_clk_notifier_block {
+	struct notifier_block nb;
+	struct dev_power_domain *pwr_domain;
+	char *con_ids[];
+};
+
+#ifdef CONFIG_PM_RUNTIME_CLK
+extern int pm_runtime_clk_init(struct device *dev);
+extern void pm_runtime_clk_destroy(struct device *dev);
+extern int pm_runtime_clk_add(struct device *dev, const char *con_id);
+extern void pm_runtime_clk_remove(struct device *dev, const char *con_id);
+extern int pm_runtime_clk_suspend(struct device *dev);
+extern int pm_runtime_clk_resume(struct device *dev);
+#else
+static inline int pm_runtime_clk_init(struct device *dev)
+{
+	return -EINVAL;
+}
+static inline void pm_runtime_clk_destroy(struct device *dev)
+{
+}
+static inline int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+	return -EINVAL;
+}
+static inline void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+}
+#define pm_runtime_clock_suspend	NULL
+#define pm_runtime_clock_resume		NULL
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+extern void pm_runtime_clk_add_notifier(struct bus_type *bus,
+					struct pm_clk_notifier_block *clknb);
+#else
+static inline void pm_runtime_clk_add_notifier(struct bus_type *bus,
+					struct pm_clk_notifier_block *clknb)
+{
+}
+#endif
+
 #endif
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 1a2ccd6f382..cf40010ce0c 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -82,7 +82,7 @@ static inline int poll_schedule(struct poll_wqueues *pwq, int state)
 }
 
 /*
- * Scaleable version of the fd_set.
+ * Scalable version of the fd_set.
  */
 
 typedef struct {
diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h
index 369e19d3750..7f1183dcd11 100644
--- a/include/linux/posix-clock.h
+++ b/include/linux/posix-clock.h
@@ -24,6 +24,7 @@
 #include <linux/fs.h>
 #include <linux/poll.h>
 #include <linux/posix-timers.h>
+#include <linux/rwsem.h>
 
 struct posix_clock;
 
@@ -104,7 +105,7 @@ struct posix_clock_operations {
  * @ops:     Functional interface to the clock
  * @cdev:    Character device instance for this clock
  * @kref:    Reference count.
- * @mutex:   Protects the 'zombie' field from concurrent access.
+ * @rwsem:   Protects the 'zombie' field from concurrent access.
  * @zombie:  If 'zombie' is true, then the hardware has disappeared.
  * @release: A function to free the structure when the reference count reaches
  *           zero. May be NULL if structure is statically allocated.
@@ -117,7 +118,7 @@ struct posix_clock {
 	struct posix_clock_operations ops;
 	struct cdev cdev;
 	struct kref kref;
-	struct mutex mutex;
+	struct rw_semaphore rwsem;
 	bool zombie;
 	void (*release)(struct posix_clock *clk);
 };
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
index d51243ae072..808227d40a6 100644
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -5,6 +5,7 @@
 #include <linux/list.h>
 #include <linux/sched.h>
 #include <linux/timex.h>
+#include <linux/alarmtimer.h>
 
 union cpu_time_count {
 	cputime_t cpu;
@@ -80,6 +81,7 @@ struct k_itimer {
 			unsigned long incr;
 			unsigned long expires;
 		} mmtimer;
+		struct alarm alarmtimer;
 	} it;
 };
 
diff --git a/include/linux/prefetch.h b/include/linux/prefetch.h
index af7c36a5a52..a3bfbdf63d3 100644
--- a/include/linux/prefetch.h
+++ b/include/linux/prefetch.h
@@ -29,7 +29,7 @@
 	prefetchw(x)	- prefetches the cacheline at "x" for write
 	spin_lock_prefetch(x) - prefetches the spinlock *x for taking
 	
-	there is also PREFETCH_STRIDE which is the architecure-prefered 
+	there is also PREFETCH_STRIDE which is the architecure-preferred 
 	"lookahead" size for prefetching streamed operations.
 	
 */
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 838c1149251..eaf4350c0f9 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -208,6 +208,8 @@ static inline struct proc_dir_entry *proc_symlink(const char *name,
 		struct proc_dir_entry *parent,const char *dest) {return NULL;}
 static inline struct proc_dir_entry *proc_mkdir(const char *name,
 	struct proc_dir_entry *parent) {return NULL;}
+static inline struct proc_dir_entry *proc_mkdir_mode(const char *name,
+	mode_t mode, struct proc_dir_entry *parent) { return NULL; }
 
 static inline struct proc_dir_entry *create_proc_read_entry(const char *name,
 	mode_t mode, struct proc_dir_entry *base, 
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index 41977737bb7..2455ef2683f 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -35,7 +35,9 @@ struct pstore_info {
 	struct mutex	buf_mutex;	/* serialize access to 'buf' */
 	char		*buf;
 	size_t		bufsize;
-	size_t		(*read)(u64 *id, enum pstore_type_id *type,
+	int		(*open)(struct pstore_info *psi);
+	int		(*close)(struct pstore_info *psi);
+	ssize_t		(*read)(u64 *id, enum pstore_type_id *type,
 			struct timespec *time);
 	u64		(*write)(enum pstore_type_id type, size_t size);
 	int		(*erase)(u64 id);
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index a1147e5dd24..9178d5cc0b0 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -189,6 +189,10 @@ static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
 		child->ptrace = current->ptrace;
 		__ptrace_link(child, current->parent);
 	}
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	atomic_set(&child->ptrace_bp_refcnt, 1);
+#endif
 }
 
 /**
@@ -350,6 +354,13 @@ extern int task_current_syscall(struct task_struct *target, long *callno,
 				unsigned long args[6], unsigned int maxargs,
 				unsigned long *sp, unsigned long *pc);
 
-#endif
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+extern int ptrace_get_breakpoints(struct task_struct *tsk);
+extern void ptrace_put_breakpoints(struct task_struct *tsk);
+#else
+static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+#endif /* __KERNEL */
 
 #endif
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 2f691e4e622..44835fb3979 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -122,7 +122,7 @@
 #define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
 #define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
 #define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interrupt Enable */
 #define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
 #define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
 #define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
index ffa2efbbe38..75cbf4f62fe 100644
--- a/include/linux/raid/md_p.h
+++ b/include/linux/raid/md_p.h
@@ -251,7 +251,7 @@ struct mdp_superblock_1 {
 	__le64	utime;		/* 40 bits second, 24 btes microseconds */
 	__le64	events;		/* incremented when superblock updated */
 	__le64	resync_offset;	/* data before this offset (from data_offset) known to be in sync */
-	__le32	sb_csum;	/* checksum upto devs[max_dev] */
+	__le32	sb_csum;	/* checksum up to devs[max_dev] */
 	__le32	max_dev;	/* size of devs[] array to consider */
 	__u8	pad3[64-32];	/* set to 0 when writing */
 
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
index 7066acb2c53..033b507b33b 100644
--- a/include/linux/rbtree.h
+++ b/include/linux/rbtree.h
@@ -136,6 +136,14 @@ static inline void rb_set_color(struct rb_node *rb, int color)
 #define RB_EMPTY_NODE(node)	(rb_parent(node) == node)
 #define RB_CLEAR_NODE(node)	(rb_set_parent(node, node))
 
+static inline void rb_init_node(struct rb_node *rb)
+{
+	rb->rb_parent_color = 0;
+	rb->rb_right = NULL;
+	rb->rb_left = NULL;
+	RB_CLEAR_NODE(rb);
+}
+
 extern void rb_insert_color(struct rb_node *, struct rb_root *);
 extern void rb_erase(struct rb_node *, struct rb_root *);
 
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index 2dea94fc440..e3beb315517 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -253,7 +253,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
  */
 #define list_for_each_entry_rcu(pos, head, member) \
 	for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
-		prefetch(pos->member.next), &pos->member != (head); \
+		&pos->member != (head); \
 		pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
 
 
@@ -270,7 +270,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
  */
 #define list_for_each_continue_rcu(pos, head) \
 	for ((pos) = rcu_dereference_raw(list_next_rcu(pos)); \
-		prefetch((pos)->next), (pos) != (head); \
+		(pos) != (head); \
 		(pos) = rcu_dereference_raw(list_next_rcu(pos)))
 
 /**
@@ -284,7 +284,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
  */
 #define list_for_each_entry_continue_rcu(pos, head, member) 		\
 	for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \
-	     prefetch(pos->member.next), &pos->member != (head);	\
+	     &pos->member != (head);	\
 	     pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
 
 /**
@@ -427,7 +427,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev,
 
 #define __hlist_for_each_rcu(pos, head)				\
 	for (pos = rcu_dereference(hlist_first_rcu(head));	\
-	     pos && ({ prefetch(pos->next); 1; });		\
+	     pos;						\
 	     pos = rcu_dereference(hlist_next_rcu(pos)))
 
 /**
@@ -443,7 +443,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev,
  */
 #define hlist_for_each_entry_rcu(tpos, pos, head, member)		\
 	for (pos = rcu_dereference_raw(hlist_first_rcu(head));		\
-		pos && ({ prefetch(pos->next); 1; }) &&			 \
+		pos &&							 \
 		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
 		pos = rcu_dereference_raw(hlist_next_rcu(pos)))
 
@@ -460,7 +460,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev,
  */
 #define hlist_for_each_entry_rcu_bh(tpos, pos, head, member)		 \
 	for (pos = rcu_dereference_bh((head)->first);			 \
-		pos && ({ prefetch(pos->next); 1; }) &&			 \
+		pos &&							 \
 		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
 		pos = rcu_dereference_bh(pos->next))
 
@@ -472,7 +472,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev,
  */
 #define hlist_for_each_entry_continue_rcu(tpos, pos, member)		\
 	for (pos = rcu_dereference((pos)->next);			\
-	     pos && ({ prefetch(pos->next); 1; }) &&			\
+	     pos &&							\
 	     ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });  \
 	     pos = rcu_dereference(pos->next))
 
@@ -484,7 +484,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev,
  */
 #define hlist_for_each_entry_continue_rcu_bh(tpos, pos, member)		\
 	for (pos = rcu_dereference_bh((pos)->next);			\
-	     pos && ({ prefetch(pos->next); 1; }) &&			\
+	     pos &&							\
 	     ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });  \
 	     pos = rcu_dereference_bh(pos->next))
 
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index af561485628..99f9aa7c280 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -47,6 +47,18 @@
 extern int rcutorture_runnable; /* for sysctl */
 #endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
 
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+extern void rcutorture_record_test_transition(void);
+extern void rcutorture_record_progress(unsigned long vernum);
+#else
+static inline void rcutorture_record_test_transition(void)
+{
+}
+static inline void rcutorture_record_progress(unsigned long vernum)
+{
+}
+#endif
+
 #define UINT_CMP_GE(a, b)	(UINT_MAX / 2 >= (a) - (b))
 #define UINT_CMP_LT(a, b)	(UINT_MAX / 2 < (a) - (b))
 #define ULONG_CMP_GE(a, b)	(ULONG_MAX / 2 >= (a) - (b))
@@ -68,7 +80,6 @@ extern void call_rcu_sched(struct rcu_head *head,
 extern void synchronize_sched(void);
 extern void rcu_barrier_bh(void);
 extern void rcu_barrier_sched(void);
-extern int sched_expedited_torture_stats(char *page);
 
 static inline void __rcu_read_lock_bh(void)
 {
@@ -339,6 +350,12 @@ extern int rcu_my_thread_group_empty(void);
 		((typeof(*p) __force __kernel *)(p)); \
 	})
 
+#define __rcu_access_index(p, space) \
+	({ \
+		typeof(p) _________p1 = ACCESS_ONCE(p); \
+		rcu_dereference_sparse(p, space); \
+		(_________p1); \
+	})
 #define __rcu_dereference_index_check(p, c) \
 	({ \
 		typeof(p) _________p1 = ACCESS_ONCE(p); \
@@ -429,6 +446,20 @@ extern int rcu_my_thread_group_empty(void);
 #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/
 
 /**
+ * rcu_access_index() - fetch RCU index with no dereferencing
+ * @p: The index to read
+ *
+ * Return the value of the specified RCU-protected index, but omit the
+ * smp_read_barrier_depends() and keep the ACCESS_ONCE().  This is useful
+ * when the value of this index is accessed, but the index is not
+ * dereferenced, for example, when testing an RCU-protected index against
+ * -1.  Although rcu_access_index() may also be used in cases where
+ * update-side locks prevent the value of the index from changing, you
+ * should instead use rcu_dereference_index_protected() for this use case.
+ */
+#define rcu_access_index(p) __rcu_access_index((p), __rcu)
+
+/**
  * rcu_dereference_index_check() - rcu_dereference for indices with debug checking
  * @p: The pointer to read, prior to dereferencing
  * @c: The conditions under which the dereference will take place
@@ -754,6 +785,7 @@ extern struct debug_obj_descr rcuhead_debug_descr;
 
 static inline void debug_rcu_head_queue(struct rcu_head *head)
 {
+	WARN_ON_ONCE((unsigned long)head & 0x3);
 	debug_object_activate(head, &rcuhead_debug_descr);
 	debug_object_active_state(head, &rcuhead_debug_descr,
 				  STATE_RCU_HEAD_READY,
@@ -777,4 +809,60 @@ static inline void debug_rcu_head_unqueue(struct rcu_head *head)
 }
 #endif	/* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
 
+static __always_inline bool __is_kfree_rcu_offset(unsigned long offset)
+{
+	return offset < 4096;
+}
+
+static __always_inline
+void __kfree_rcu(struct rcu_head *head, unsigned long offset)
+{
+	typedef void (*rcu_callback)(struct rcu_head *);
+
+	BUILD_BUG_ON(!__builtin_constant_p(offset));
+
+	/* See the kfree_rcu() header comment. */
+	BUILD_BUG_ON(!__is_kfree_rcu_offset(offset));
+
+	call_rcu(head, (rcu_callback)offset);
+}
+
+extern void kfree(const void *);
+
+static inline void __rcu_reclaim(struct rcu_head *head)
+{
+	unsigned long offset = (unsigned long)head->func;
+
+	if (__is_kfree_rcu_offset(offset))
+		kfree((void *)head - offset);
+	else
+		head->func(head);
+}
+
+/**
+ * kfree_rcu() - kfree an object after a grace period.
+ * @ptr:	pointer to kfree
+ * @rcu_head:	the name of the struct rcu_head within the type of @ptr.
+ *
+ * Many rcu callbacks functions just call kfree() on the base structure.
+ * These functions are trivial, but their size adds up, and furthermore
+ * when they are used in a kernel module, that module must invoke the
+ * high-latency rcu_barrier() function at module-unload time.
+ *
+ * The kfree_rcu() function handles this issue.  Rather than encoding a
+ * function address in the embedded rcu_head structure, kfree_rcu() instead
+ * encodes the offset of the rcu_head structure within the base structure.
+ * Because the functions are not allowed in the low-order 4096 bytes of
+ * kernel virtual memory, offsets up to 4095 bytes can be accommodated.
+ * If the offset is larger than 4095 bytes, a compile-time error will
+ * be generated in __kfree_rcu().  If this error is triggered, you can
+ * either fall back to use of call_rcu() or rearrange the structure to
+ * position the rcu_head structure into the first 4096 bytes.
+ *
+ * Note that the allowable offset might decrease in the future, for example,
+ * to allow something like kmem_cache_free_rcu().
+ */
+#define kfree_rcu(ptr, rcu_head)					\
+	__kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
+
 #endif /* __LINUX_RCUPDATE_H */
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index 30ebd7c8d87..52b3e0281fd 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -100,6 +100,14 @@ static inline void rcu_note_context_switch(int cpu)
 }
 
 /*
+ * Take advantage of the fact that there is only one CPU, which
+ * allows us to ignore virtualization-based context switches.
+ */
+static inline void rcu_virt_note_context_switch(int cpu)
+{
+}
+
+/*
  * Return the number of grace periods.
  */
 static inline long rcu_batches_completed(void)
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 3a933482734..e65d06634dd 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -35,6 +35,16 @@ extern void rcu_note_context_switch(int cpu);
 extern int rcu_needs_cpu(int cpu);
 extern void rcu_cpu_stall_reset(void);
 
+/*
+ * Note a virtualization-based context switch.  This is simply a
+ * wrapper around rcu_note_context_switch(), which allows TINY_RCU
+ * to save a few bytes.
+ */
+static inline void rcu_virt_note_context_switch(int cpu)
+{
+	rcu_note_context_switch(cpu);
+}
+
 #ifdef CONFIG_TREE_PREEMPT_RCU
 
 extern void exit_rcu(void);
@@ -58,9 +68,12 @@ static inline void synchronize_rcu_bh_expedited(void)
 
 extern void rcu_barrier(void);
 
+extern unsigned long rcutorture_testseq;
+extern unsigned long rcutorture_vernum;
 extern long rcu_batches_completed(void);
 extern long rcu_batches_completed_bh(void);
 extern long rcu_batches_completed_sched(void);
+
 extern void rcu_force_quiescent_state(void);
 extern void rcu_bh_force_quiescent_state(void);
 extern void rcu_sched_force_quiescent_state(void);
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 0a3842aacba..eca75df00fe 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -1557,7 +1557,7 @@ struct tree_balance {
 /* When inserting an item. */
 #define M_INSERT	'i'
 /* When inserting into (directories only) or appending onto an already
-   existant item. */
+   existent item. */
 #define M_PASTE		'p'
 /* When deleting an item. */
 #define M_DELETE	'd'
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 4e37a7cfa72..4d50611112b 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -396,7 +396,7 @@ union rio_pw_msg {
 };
 
 /* Architecture and hardware-specific functions */
-extern void rio_register_mport(struct rio_mport *);
+extern int rio_register_mport(struct rio_mport *);
 extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
 extern void rio_close_inb_mbox(struct rio_mport *, int);
 extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int);
diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h
index 7410d3365e2..0cee0152aca 100644
--- a/include/linux/rio_ids.h
+++ b/include/linux/rio_ids.h
@@ -35,6 +35,7 @@
 #define RIO_DID_IDTCPS6Q		0x035f
 #define RIO_DID_IDTCPS10Q		0x035e
 #define RIO_DID_IDTCPS1848		0x0374
+#define RIO_DID_IDTCPS1432		0x0375
 #define RIO_DID_IDTCPS1616		0x0379
 #define RIO_DID_IDTVPS1616		0x0377
 #define RIO_DID_IDTSPS1616		0x0378
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 2ca7e8a7806..877ece45426 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -228,6 +228,8 @@ extern int rtc_read_alarm(struct rtc_device *rtc,
 			struct rtc_wkalrm *alrm);
 extern int rtc_set_alarm(struct rtc_device *rtc,
 				struct rtc_wkalrm *alrm);
+extern int rtc_initialize_alarm(struct rtc_device *rtc,
+				struct rtc_wkalrm *alrm);
 extern void rtc_update_irq(struct rtc_device *rtc,
 			unsigned long num, unsigned long events);
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 83bd2e2982f..885c4f242ad 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -360,7 +360,7 @@ extern signed long schedule_timeout_interruptible(signed long timeout);
 extern signed long schedule_timeout_killable(signed long timeout);
 extern signed long schedule_timeout_uninterruptible(signed long timeout);
 asmlinkage void schedule(void);
-extern int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner);
+extern int mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner);
 
 struct nsproxy;
 struct user_namespace;
@@ -653,9 +653,8 @@ struct signal_struct {
  * Bits in flags field of signal_struct.
  */
 #define SIGNAL_STOP_STOPPED	0x00000001 /* job control stop in effect */
-#define SIGNAL_STOP_DEQUEUED	0x00000002 /* stop signal dequeued */
-#define SIGNAL_STOP_CONTINUED	0x00000004 /* SIGCONT since WCONTINUED reap */
-#define SIGNAL_GROUP_EXIT	0x00000008 /* group exit in progress */
+#define SIGNAL_STOP_CONTINUED	0x00000002 /* SIGCONT since WCONTINUED reap */
+#define SIGNAL_GROUP_EXIT	0x00000004 /* group exit in progress */
 /*
  * Pending notifications to parent.
  */
@@ -731,10 +730,6 @@ struct sched_info {
 	/* timestamps */
 	unsigned long long last_arrival,/* when we last ran on a cpu */
 			   last_queued;	/* when we were last queued to run */
-#ifdef CONFIG_SCHEDSTATS
-	/* BKL stats */
-	unsigned int bkl_count;
-#endif
 };
 #endif /* defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) */
 
@@ -854,7 +849,7 @@ extern int __weak arch_sd_sibiling_asym_packing(void);
 
 /*
  * Optimise SD flags for power savings:
- * SD_BALANCE_NEWIDLE helps agressive task consolidation and power savings.
+ * SD_BALANCE_NEWIDLE helps aggressive task consolidation and power savings.
  * Keep default SD flags if sched_{smt,mc}_power_saving=0
  */
 
@@ -868,6 +863,7 @@ static inline int sd_power_saving_flags(void)
 
 struct sched_group {
 	struct sched_group *next;	/* Must be a circular list */
+	atomic_t ref;
 
 	/*
 	 * CPU power of this group, SCHED_LOAD_SCALE being max power for a
@@ -882,9 +878,6 @@ struct sched_group {
 	 * NOTE: this field is variable length. (Allocated dynamically
 	 * by attaching extra space to the end of the structure,
 	 * depending on how many CPUs the kernel has booted up with)
-	 *
-	 * It is also be embedded into static data structures at build
-	 * time. (See 'struct static_sched_group' in kernel/sched.c)
 	 */
 	unsigned long cpumask[0];
 };
@@ -894,17 +887,6 @@ static inline struct cpumask *sched_group_cpus(struct sched_group *sg)
 	return to_cpumask(sg->cpumask);
 }
 
-enum sched_domain_level {
-	SD_LV_NONE = 0,
-	SD_LV_SIBLING,
-	SD_LV_MC,
-	SD_LV_BOOK,
-	SD_LV_CPU,
-	SD_LV_NODE,
-	SD_LV_ALLNODES,
-	SD_LV_MAX
-};
-
 struct sched_domain_attr {
 	int relax_domain_level;
 };
@@ -913,6 +895,8 @@ struct sched_domain_attr {
 	.relax_domain_level = -1,			\
 }
 
+extern int sched_domain_level_max;
+
 struct sched_domain {
 	/* These fields must be setup */
 	struct sched_domain *parent;	/* top domain must be null terminated */
@@ -930,7 +914,7 @@ struct sched_domain {
 	unsigned int forkexec_idx;
 	unsigned int smt_gain;
 	int flags;			/* See SD_* */
-	enum sched_domain_level level;
+	int level;
 
 	/* Runtime fields. */
 	unsigned long last_balance;	/* init to jiffies. units in jiffies */
@@ -973,6 +957,10 @@ struct sched_domain {
 #ifdef CONFIG_SCHED_DEBUG
 	char *name;
 #endif
+	union {
+		void *private;		/* used during construction */
+		struct rcu_head rcu;	/* used during destruction */
+	};
 
 	unsigned int span_weight;
 	/*
@@ -981,9 +969,6 @@ struct sched_domain {
 	 * NOTE: this field is variable length. (Allocated dynamically
 	 * by attaching extra space to the end of the structure,
 	 * depending on how many CPUs the kernel has booted up with)
-	 *
-	 * It is also be embedded into static data structures at build
-	 * time. (See 'struct static_sched_domain' in kernel/sched.c)
 	 */
 	unsigned long span[0];
 };
@@ -1048,8 +1033,12 @@ struct sched_domain;
 #define WF_FORK		0x02		/* child wakeup after fork */
 
 #define ENQUEUE_WAKEUP		1
-#define ENQUEUE_WAKING		2
-#define ENQUEUE_HEAD		4
+#define ENQUEUE_HEAD		2
+#ifdef CONFIG_SMP
+#define ENQUEUE_WAKING		4	/* sched_class::task_waking was called */
+#else
+#define ENQUEUE_WAKING		0
+#endif
 
 #define DEQUEUE_SLEEP		1
 
@@ -1067,12 +1056,11 @@ struct sched_class {
 	void (*put_prev_task) (struct rq *rq, struct task_struct *p);
 
 #ifdef CONFIG_SMP
-	int  (*select_task_rq)(struct rq *rq, struct task_struct *p,
-			       int sd_flag, int flags);
+	int  (*select_task_rq)(struct task_struct *p, int sd_flag, int flags);
 
 	void (*pre_schedule) (struct rq *this_rq, struct task_struct *task);
 	void (*post_schedule) (struct rq *this_rq);
-	void (*task_waking) (struct rq *this_rq, struct task_struct *task);
+	void (*task_waking) (struct task_struct *task);
 	void (*task_woken) (struct rq *this_rq, struct task_struct *task);
 
 	void (*set_cpus_allowed)(struct task_struct *p,
@@ -1197,13 +1185,11 @@ struct task_struct {
 	unsigned int flags;	/* per process flags, defined below */
 	unsigned int ptrace;
 
-	int lock_depth;		/* BKL lock depth */
-
 #ifdef CONFIG_SMP
-#ifdef __ARCH_WANT_UNLOCKED_CTXSW
-	int oncpu;
-#endif
+	struct task_struct *wake_entry;
+	int on_cpu;
 #endif
+	int on_rq;
 
 	int prio, static_prio, normal_prio;
 	unsigned int rt_priority;
@@ -1254,6 +1240,9 @@ struct task_struct {
 #endif
 
 	struct mm_struct *mm, *active_mm;
+#ifdef CONFIG_COMPAT_BRK
+	unsigned brk_randomized:1;
+#endif
 #if defined(SPLIT_RSS_COUNTING)
 	struct task_rss_stat	rss_stat;
 #endif
@@ -1261,6 +1250,7 @@ struct task_struct {
 	int exit_state;
 	int exit_code, exit_signal;
 	int pdeath_signal;  /*  The signal sent when the parent dies  */
+	unsigned int group_stop;	/* GROUP_STOP_*, siglock protected */
 	/* ??? */
 	unsigned int personality;
 	unsigned did_exec:1;
@@ -1271,6 +1261,7 @@ struct task_struct {
 
 	/* Revert to default priority/policy when forking */
 	unsigned sched_reset_on_fork:1;
+	unsigned sched_contributes_to_load:1;
 
 	pid_t pid;
 	pid_t tgid;
@@ -1534,6 +1525,9 @@ struct task_struct {
 		unsigned long memsw_nr_pages; /* uncharged mem+swap usage */
 	} memcg_batch;
 #endif
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	atomic_t ptrace_bp_refcnt;
+#endif
 };
 
 /* Future-safe accessor for struct task_struct's cpus_allowed. */
@@ -1777,6 +1771,17 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *
 #define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
 #define used_math() tsk_used_math(current)
 
+/*
+ * task->group_stop flags
+ */
+#define GROUP_STOP_SIGMASK	0xffff    /* signr of the last group stop */
+#define GROUP_STOP_PENDING	(1 << 16) /* task should stop for group stop */
+#define GROUP_STOP_CONSUME	(1 << 17) /* consume group stop count */
+#define GROUP_STOP_TRAPPING	(1 << 18) /* switching from STOPPED to TRACED */
+#define GROUP_STOP_DEQUEUED	(1 << 19) /* stop signal dequeued */
+
+extern void task_clear_group_stop_pending(struct task_struct *task);
+
 #ifdef CONFIG_PREEMPT_RCU
 
 #define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */
@@ -2057,14 +2062,13 @@ extern void xtime_update(unsigned long ticks);
 
 extern int wake_up_state(struct task_struct *tsk, unsigned int state);
 extern int wake_up_process(struct task_struct *tsk);
-extern void wake_up_new_task(struct task_struct *tsk,
-				unsigned long clone_flags);
+extern void wake_up_new_task(struct task_struct *tsk);
 #ifdef CONFIG_SMP
  extern void kick_process(struct task_struct *tsk);
 #else
  static inline void kick_process(struct task_struct *tsk) { }
 #endif
-extern void sched_fork(struct task_struct *p, int clone_flags);
+extern void sched_fork(struct task_struct *p);
 extern void sched_dead(struct task_struct *p);
 
 extern void proc_caches_init(void);
@@ -2189,8 +2193,10 @@ extern void set_task_comm(struct task_struct *tsk, char *from);
 extern char *get_task_comm(char *to, struct task_struct *tsk);
 
 #ifdef CONFIG_SMP
+void scheduler_ipi(void);
 extern unsigned long wait_task_inactive(struct task_struct *, long match_state);
 #else
+static inline void scheduler_ipi(void) { }
 static inline unsigned long wait_task_inactive(struct task_struct *p,
 					       long match_state)
 {
diff --git a/include/linux/security.h b/include/linux/security.h
index ca02f171673..8ce59ef3e5a 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -1456,7 +1456,7 @@ struct security_operations {
 			     struct inode *new_dir, struct dentry *new_dentry);
 	int (*inode_readlink) (struct dentry *dentry);
 	int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd);
-	int (*inode_permission) (struct inode *inode, int mask);
+	int (*inode_permission) (struct inode *inode, int mask, unsigned flags);
 	int (*inode_setattr)	(struct dentry *dentry, struct iattr *attr);
 	int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry);
 	int (*inode_setxattr) (struct dentry *dentry, const char *name,
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index e98cd2e5719..06d69648fc8 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -88,12 +88,12 @@ static __always_inline unsigned read_seqbegin(const seqlock_t *sl)
 	unsigned ret;
 
 repeat:
-	ret = sl->sequence;
-	smp_rmb();
+	ret = ACCESS_ONCE(sl->sequence);
 	if (unlikely(ret & 1)) {
 		cpu_relax();
 		goto repeat;
 	}
+	smp_rmb();
 
 	return ret;
 }
diff --git a/include/linux/signal.h b/include/linux/signal.h
index fcd2b14b193..a822300a253 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -7,6 +7,8 @@
 #ifdef __KERNEL__
 #include <linux/list.h>
 
+struct task_struct;
+
 /* for sysctl */
 extern int print_fatal_signals;
 /*
@@ -123,13 +125,13 @@ _SIG_SET_BINOP(sigorsets, _sig_or)
 #define _sig_and(x,y)	((x) & (y))
 _SIG_SET_BINOP(sigandsets, _sig_and)
 
-#define _sig_nand(x,y)	((x) & ~(y))
-_SIG_SET_BINOP(signandsets, _sig_nand)
+#define _sig_andn(x,y)	((x) & ~(y))
+_SIG_SET_BINOP(sigandnsets, _sig_andn)
 
 #undef _SIG_SET_BINOP
 #undef _sig_or
 #undef _sig_and
-#undef _sig_nand
+#undef _sig_andn
 
 #define _SIG_SET_OP(name, op)						\
 static inline void name(sigset_t *set)					\
@@ -234,6 +236,9 @@ static inline int valid_signal(unsigned long sig)
 	return sig <= _NSIG ? 1 : 0;
 }
 
+struct timespec;
+struct pt_regs;
+
 extern int next_signal(struct sigpending *pending, sigset_t *mask);
 extern int do_send_sig_info(int sig, struct siginfo *info,
 				struct task_struct *p, bool group);
@@ -242,10 +247,12 @@ extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
 extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
 				 siginfo_t *info);
 extern long do_sigpending(void __user *, unsigned long);
+extern int do_sigtimedwait(const sigset_t *, siginfo_t *,
+				const struct timespec *);
 extern int sigprocmask(int, sigset_t *, sigset_t *);
+extern void set_current_blocked(const sigset_t *);
 extern int show_unhandled_signals;
 
-struct pt_regs;
 extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
 extern void exit_signals(struct task_struct *tsk);
 
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index d9e52fa2416..79aafbbf430 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -391,8 +391,8 @@ struct sk_buff {
 
 	__u32			rxhash;
 
+	__u16			queue_mapping;
 	kmemcheck_bitfield_begin(flags2);
-	__u16			queue_mapping:16;
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	__u8			ndisc_nodetype:2;
 #endif
@@ -474,7 +474,7 @@ static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)
 extern void skb_dst_set_noref(struct sk_buff *skb, struct dst_entry *dst);
 
 /**
- * skb_dst_is_noref - Test if skb dst isnt refcounted
+ * skb_dst_is_noref - Test if skb dst isn't refcounted
  * @skb: buffer
  */
 static inline bool skb_dst_is_noref(const struct sk_buff *skb)
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index bc21db598c0..76199b75d58 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -21,7 +21,7 @@
 #define RPC_LED_10	(0x02)	/* LED = 10Mbps link detect */
 #define RPC_LED_FD	(0x03)	/* LED = Full Duplex Mode */
 #define RPC_LED_TX_RX	(0x04)	/* LED = TX or RX packet occurred */
-#define RPC_LED_100	(0x05)	/* LED = 100Mbps link dectect */
+#define RPC_LED_100	(0x05)	/* LED = 100Mbps link detect */
 #define RPC_LED_TX	(0x06)	/* LED = TX packet occurred */
 #define RPC_LED_RX	(0x07)	/* LED = RX packet occurred */
 
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index 7144e8aa1e4..4dde70e7482 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -29,6 +29,7 @@ struct smsc911x_platform_config {
 	unsigned int irq_polarity;
 	unsigned int irq_type;
 	unsigned int flags;
+	unsigned int shift;
 	phy_interface_t phy_interface;
 	unsigned char mac[6];
 };
diff --git a/include/linux/socket.h b/include/linux/socket.h
index edbb1d07ddf..4ef98e422fd 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -88,7 +88,7 @@ struct cmsghdr {
 };
 
 /*
- *	Ancilliary data object information MACROS
+ *	Ancillary data object information MACROS
  *	Table 5-14 of POSIX 1003.1g
  */
 
@@ -333,5 +333,7 @@ struct timespec;
 
 extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
 			  unsigned int flags, struct timespec *timeout);
+extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
+			  unsigned int vlen, unsigned int flags);
 #endif /* not kernel and not glibc */
 #endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
index 1904afedb82..fe204fe39f7 100644
--- a/include/linux/soundcard.h
+++ b/include/linux/soundcard.h
@@ -1231,7 +1231,7 @@ void seqbuf_dump(void);	/* This function must be provided by programs */
 #define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
 
 /*
- * Timing and syncronization macros
+ * Timing and synchronization macros
  */
 
 #define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index bf0570a84f7..52d9ed01855 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -66,7 +66,7 @@
  * are in a different address space (and may be of different sizes in some
  * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
  * Zero-initialize the structure, including currently unused fields, to
- * accomodate potential future updates.
+ * accommodate potential future updates.
  *
  * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
  * Pass it an array of related transfers, they'll execute together.
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 80e535897de..0b22d51258e 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -81,7 +81,7 @@
 #include <linux/spinlock_types.h>
 
 /*
- * Pull the arch_spin*() functions/declarations (UP-nondebug doesnt need them):
+ * Pull the arch_spin*() functions/declarations (UP-nondebug doesn't need them):
  */
 #ifdef CONFIG_SMP
 # include <asm/spinlock.h>
diff --git a/include/linux/spinlock_up.h b/include/linux/spinlock_up.h
index b14f6a91e19..a26e2fb604e 100644
--- a/include/linux/spinlock_up.h
+++ b/include/linux/spinlock_up.h
@@ -5,6 +5,8 @@
 # error "please don't include this file directly"
 #endif
 
+#include <asm/processor.h>	/* for cpu_relax() */
+
 /*
  * include/linux/spinlock_up.h - UP-debug version of spinlocks.
  *
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index f017b8900f7..252e4482178 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struct ssb_bus *bus);
 
 /* Set a fallback SPROM.
  * See kdoc at the function definition for complete documentation. */
-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+extern int ssb_arch_register_fallback_sprom(
+		int (*sprom_callback)(struct ssb_bus *bus,
+		struct ssb_sprom *out));
 
 /* Suspend a SSB bus.
  * Call this from the parent bus suspend routine. */
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index e1035291569..9529e49b038 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -26,7 +26,9 @@
 #ifndef __STMMAC_PLATFORM_DATA
 #define __STMMAC_PLATFORM_DATA
 
-/* platfrom data for platfrom device structure's platfrom_data field */
+#include <linux/platform_device.h>
+
+/* platform data for platform device structure's platform_data field */
 
 /* Private data for the STM on-board ethernet driver */
 struct plat_stmmacenet_data {
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index 1808960c505..092dc9b1ce7 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -105,7 +105,7 @@ static inline int try_stop_cpus(const struct cpumask *cpumask,
  * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
  *
  * Description: This causes a thread to be scheduled on every cpu,
- * each of which disables interrupts.  The result is that noone is
+ * each of which disables interrupts.  The result is that no one is
  * holding a spinlock or inside any other preempt-disabled region when
  * @fn() runs.
  *
diff --git a/include/linux/string.h b/include/linux/string.h
index a716ee2a8ad..a176db2f2c8 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -123,6 +123,7 @@ extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
 extern void argv_free(char **argv);
 
 extern bool sysfs_streq(const char *s1, const char *s2);
+extern int strtobool(const char *s, bool *res);
 
 #ifdef CONFIG_BINARY_PRINTF
 int vbin_printf(u32 *bin_buf, size_t size, const char *fmt, va_list args);
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
index 7898ea13de7..8d2eef1a858 100644
--- a/include/linux/sunrpc/cache.h
+++ b/include/linux/sunrpc/cache.h
@@ -35,10 +35,10 @@
  * Each cache must be registered so that it can be cleaned regularly.
  * When the cache is unregistered, it is flushed completely.
  *
- * Entries have a ref count and a 'hashed' flag which counts the existance
+ * Entries have a ref count and a 'hashed' flag which counts the existence
  * in the hash table.
  * We only expire entries when refcount is zero.
- * Existance in the cache is counted  the refcount.
+ * Existence in the cache is counted  the refcount.
  */
 
 /* Every cache item has a common header that is used
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index d81db8012c6..f73c482ec9c 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -127,13 +127,16 @@ struct rpc_task_setup {
 #define RPC_TASK_KILLED		0x0100		/* task was killed */
 #define RPC_TASK_SOFT		0x0200		/* Use soft timeouts */
 #define RPC_TASK_SOFTCONN	0x0400		/* Fail if can't connect */
+#define RPC_TASK_SENT		0x0800		/* message was sent */
+#define RPC_TASK_TIMEOUT	0x1000		/* fail with ETIMEDOUT on timeout */
 
 #define RPC_IS_ASYNC(t)		((t)->tk_flags & RPC_TASK_ASYNC)
 #define RPC_IS_SWAPPER(t)	((t)->tk_flags & RPC_TASK_SWAPPER)
 #define RPC_DO_ROOTOVERRIDE(t)	((t)->tk_flags & RPC_TASK_ROOTCREDS)
 #define RPC_ASSASSINATED(t)	((t)->tk_flags & RPC_TASK_KILLED)
-#define RPC_IS_SOFT(t)		((t)->tk_flags & RPC_TASK_SOFT)
+#define RPC_IS_SOFT(t)		((t)->tk_flags & (RPC_TASK_SOFT|RPC_TASK_TIMEOUT))
 #define RPC_IS_SOFTCONN(t)	((t)->tk_flags & RPC_TASK_SOFTCONN)
+#define RPC_WAS_SENT(t)		((t)->tk_flags & RPC_TASK_SENT)
 
 #define RPC_TASK_RUNNING	0
 #define RPC_TASK_QUEUED		1
diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h
index ca7d725861f..83bbee3f089 100644
--- a/include/linux/sunrpc/svcauth_gss.h
+++ b/include/linux/sunrpc/svcauth_gss.h
@@ -2,7 +2,7 @@
  * linux/include/linux/sunrpc/svcauth_gss.h
  *
  * Bruce Fields <bfields@umich.edu>
- * Copyright (c) 2002 The Regents of the Unviersity of Michigan
+ * Copyright (c) 2002 The Regents of the University of Michigan
  */
 
 #ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 5a89e361287..083ffea7ba1 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -249,6 +249,8 @@ extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
 extern int hibernate(void);
 extern bool system_entering_hibernation(void);
 #else /* CONFIG_HIBERNATION */
+static inline void register_nosave_region(unsigned long b, unsigned long e) {}
+static inline void register_nosave_region_late(unsigned long b, unsigned long e) {}
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
 static inline void swsusp_set_page_free(struct page *p) {}
 static inline void swsusp_unset_page_free(struct page *p) {}
@@ -297,14 +299,7 @@ static inline bool pm_wakeup_pending(void) { return false; }
 
 extern struct mutex pm_mutex;
 
-#ifndef CONFIG_HIBERNATION
-static inline void register_nosave_region(unsigned long b, unsigned long e)
-{
-}
-static inline void register_nosave_region_late(unsigned long b, unsigned long e)
-{
-}
-
+#ifndef CONFIG_HIBERNATE_CALLBACKS
 static inline void lock_system_sleep(void) {}
 static inline void unlock_system_sleep(void) {}
 
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 83ecc1749ef..ab71447d0c5 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -610,6 +610,8 @@ asmlinkage long sys_send(int, void __user *, size_t, unsigned);
 asmlinkage long sys_sendto(int, void __user *, size_t, unsigned,
 				struct sockaddr __user *, int);
 asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_sendmmsg(int fd, struct mmsghdr __user *msg,
+			     unsigned int vlen, unsigned flags);
 asmlinkage long sys_recv(int, void __user *, size_t, unsigned);
 asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned,
 				struct sockaddr __user *, int __user *);
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index 8a75da551e4..d35e783a598 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -7,13 +7,13 @@
  * We still have a notion of a driver for a system device, because we still
  * want to perform basic operations on these devices. 
  *
- * We also support auxillary drivers binding to devices of a certain class.
+ * We also support auxiliary drivers binding to devices of a certain class.
  * 
  * This allows configurable drivers to register themselves for devices of
  * a certain type. And, it allows class definitions to reside in generic
  * code while arch-specific code can register specific drivers.
  *
- * Auxillary drivers registered with a NULL cls are registered as drivers
+ * Auxiliary drivers registered with a NULL cls are registered as drivers
  * for all system devices, and get notification calls for each device. 
  */
 
@@ -34,12 +34,6 @@ struct sysdev_class {
 	struct list_head	drivers;
 	struct sysdev_class_attribute **attrs;
 	struct kset		kset;
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-	/* Default operations for these types of devices */
-	int	(*shutdown)(struct sys_device *);
-	int	(*suspend)(struct sys_device *, pm_message_t state);
-	int	(*resume)(struct sys_device *);
-#endif
 };
 
 struct sysdev_class_attribute {
@@ -70,18 +64,13 @@ extern int sysdev_class_create_file(struct sysdev_class *,
 extern void sysdev_class_remove_file(struct sysdev_class *,
 	struct sysdev_class_attribute *);
 /**
- * Auxillary system device drivers.
+ * Auxiliary system device drivers.
  */
 
 struct sysdev_driver {
 	struct list_head	entry;
 	int	(*add)(struct sys_device *);
 	int	(*remove)(struct sys_device *);
-#ifndef CONFIG_ARCH_NO_SYSDEV_OPS
-	int	(*shutdown)(struct sys_device *);
-	int	(*suspend)(struct sys_device *, pm_message_t state);
-	int	(*resume)(struct sys_device *);
-#endif
 };
 
 
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 30b881555fa..c3acda60eee 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -176,7 +176,6 @@ struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
 				      const unsigned char *name);
 struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd);
 void sysfs_put(struct sysfs_dirent *sd);
-void sysfs_printk_last_file(void);
 
 /* Called to clear a ns tag when it is no longer valid */
 void sysfs_exit_ns(enum kobj_ns_type type, const void *tag);
@@ -348,10 +347,6 @@ static inline int __must_check sysfs_init(void)
 	return 0;
 }
 
-static inline void sysfs_printk_last_file(void)
-{
-}
-
 #endif /* CONFIG_SYSFS */
 
 #endif /* _SYSFS_H_ */
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 7071ec5d011..b004e557caa 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -140,12 +140,12 @@ extern long st_unregister(struct st_proto_s *);
  */
 struct st_data_s {
 	unsigned long st_state;
-	struct tty_struct *tty;
 	struct sk_buff *tx_skb;
 #define ST_TX_SENDING	1
 #define ST_TX_WAKEUP	2
 	unsigned long tx_state;
 	struct st_proto_s *list[ST_MAX_CHANNELS];
+	bool is_registered[ST_MAX_CHANNELS];
 	unsigned long rx_state;
 	unsigned long rx_count;
 	struct sk_buff *rx_skb;
@@ -155,6 +155,7 @@ struct st_data_s {
 	unsigned char	protos_registered;
 	unsigned long ll_state;
 	void *kim_data;
+	struct tty_struct *tty;
 };
 
 /*
diff --git a/include/linux/time.h b/include/linux/time.h
index 454a2620578..b3061782dec 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -126,6 +126,7 @@ struct timespec __current_kernel_time(void); /* does not take xtime_lock */
 struct timespec get_monotonic_coarse(void);
 void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim,
 				struct timespec *wtom, struct timespec *sleep);
+void timekeeping_inject_sleeptime(struct timespec *delta);
 
 #define CURRENT_TIME		(current_kernel_time())
 #define CURRENT_TIME_SEC	((struct timespec) { get_seconds(), 0 })
@@ -294,6 +295,8 @@ struct itimerval {
 #define CLOCK_REALTIME_COARSE		5
 #define CLOCK_MONOTONIC_COARSE		6
 #define CLOCK_BOOTTIME			7
+#define CLOCK_REALTIME_ALARM		8
+#define CLOCK_BOOTTIME_ALARM		9
 
 /*
  * The IDs of various hardware clocks:
diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h
index d24aabaca47..5088727478f 100644
--- a/include/linux/timerqueue.h
+++ b/include/linux/timerqueue.h
@@ -24,7 +24,7 @@ extern struct timerqueue_node *timerqueue_iterate_next(
 						struct timerqueue_node *node);
 
 /**
- * timerqueue_getnext - Returns the timer with the earlies expiration time
+ * timerqueue_getnext - Returns the timer with the earliest expiration time
  *
  * @head: head of timerqueue
  *
@@ -39,7 +39,7 @@ struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head)
 
 static inline void timerqueue_init(struct timerqueue_node *node)
 {
-	RB_CLEAR_NODE(&node->node);
+	rb_init_node(&node->node);
 }
 
 static inline void timerqueue_init_head(struct timerqueue_head *head)
diff --git a/include/linux/tipc.h b/include/linux/tipc.h
index a5b994a204d..f2d90091cc2 100644
--- a/include/linux/tipc.h
+++ b/include/linux/tipc.h
@@ -101,7 +101,7 @@ static inline unsigned int tipc_node(__u32 addr)
  * Limiting values for messages
  */
 
-#define TIPC_MAX_USER_MSG_SIZE	66000
+#define TIPC_MAX_USER_MSG_SIZE	66000U
 
 /*
  * Message importance levels
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 3a2e66d88a3..e95f5236611 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -169,7 +169,7 @@ static inline int tracehook_unsafe_exec(struct task_struct *task)
  * tracehook_tracer_task - return the task that is tracing the given task
  * @tsk:		task to consider
  *
- * Returns NULL if noone is tracing @task, or the &struct task_struct
+ * Returns NULL if no one is tracing @task, or the &struct task_struct
  * pointer to its tracer.
  *
  * Must called under rcu_read_lock().  The pointer returned might be kept
@@ -448,7 +448,7 @@ static inline int tracehook_force_sigpending(void)
  *
  * Return zero to check for a real pending signal normally.
  * Return -1 after releasing the siglock to repeat the check.
- * Return a signal number to induce an artifical signal delivery,
+ * Return a signal number to induce an artificial signal delivery,
  * setting *@info and *@return_ka to specify its details and behavior.
  *
  * The @return_ka->sa_handler value controls the disposition of the
@@ -469,33 +469,6 @@ static inline int tracehook_get_signal(struct task_struct *task,
 }
 
 /**
- * tracehook_notify_jctl - report about job control stop/continue
- * @notify:		zero, %CLD_STOPPED or %CLD_CONTINUED
- * @why:		%CLD_STOPPED or %CLD_CONTINUED
- *
- * This is called when we might call do_notify_parent_cldstop().
- *
- * @notify is zero if we would not ordinarily send a %SIGCHLD,
- * or is the %CLD_STOPPED or %CLD_CONTINUED .si_code for %SIGCHLD.
- *
- * @why is %CLD_STOPPED when about to stop for job control;
- * we are already in %TASK_STOPPED state, about to call schedule().
- * It might also be that we have just exited (check %PF_EXITING),
- * but need to report that a group-wide stop is complete.
- *
- * @why is %CLD_CONTINUED when waking up after job control stop and
- * ready to make a delayed @notify report.
- *
- * Return the %CLD_* value for %SIGCHLD, or zero to generate no signal.
- *
- * Called with the siglock held.
- */
-static inline int tracehook_notify_jctl(int notify, int why)
-{
-	return notify ?: (current->ptrace & PT_PTRACED) ? why : 0;
-}
-
-/**
  * tracehook_finish_jctl - report about return from job control stop
  *
  * This is called by do_signal_stop() after wakeup.
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 97c84a58efb..d530a4460a0 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -29,7 +29,7 @@ struct tracepoint_func {
 
 struct tracepoint {
 	const char *name;		/* Tracepoint name */
-	int state;			/* State. */
+	struct jump_label_key key;
 	void (*regfunc)(void);
 	void (*unregfunc)(void);
 	struct tracepoint_func __rcu *funcs;
@@ -146,9 +146,7 @@ void tracepoint_update_probe_range(struct tracepoint * const *begin,
 	extern struct tracepoint __tracepoint_##name;			\
 	static inline void trace_##name(proto)				\
 	{								\
-		JUMP_LABEL(&__tracepoint_##name.state, do_trace);	\
-		return;							\
-do_trace:								\
+		if (static_branch(&__tracepoint_##name.key))		\
 			__DO_TRACE(&__tracepoint_##name,		\
 				TP_PROTO(data_proto),			\
 				TP_ARGS(data_args),			\
@@ -176,14 +174,14 @@ do_trace:								\
  * structures, so we create an array of pointers that will be used for iteration
  * on the tracepoints.
  */
-#define DEFINE_TRACE_FN(name, reg, unreg)				\
-	static const char __tpstrtab_##name[]				\
-	__attribute__((section("__tracepoints_strings"))) = #name;	\
-	struct tracepoint __tracepoint_##name				\
-	__attribute__((section("__tracepoints"))) =			\
-		{ __tpstrtab_##name, 0, reg, unreg, NULL };		\
-	static struct tracepoint * const __tracepoint_ptr_##name __used	\
-	__attribute__((section("__tracepoints_ptrs"))) =		\
+#define DEFINE_TRACE_FN(name, reg, unreg)				 \
+	static const char __tpstrtab_##name[]				 \
+	__attribute__((section("__tracepoints_strings"))) = #name;	 \
+	struct tracepoint __tracepoint_##name				 \
+	__attribute__((section("__tracepoints"))) =			 \
+		{ __tpstrtab_##name, JUMP_LABEL_INIT, reg, unreg, NULL };\
+	static struct tracepoint * const __tracepoint_ptr_##name __used	 \
+	__attribute__((section("__tracepoints_ptrs"))) =		 \
 		&__tracepoint_##name;
 
 #define DEFINE_TRACE(name)						\
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index 1b479091105..5c75153f944 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -8,7 +8,7 @@
  *  Copyright:	MontaVista Software, Inc.
  *
  * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
  * dont bother Nicolas please ;-)
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/usb.h b/include/linux/usb.h
index e63efeb378e..65f78ca5d88 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -623,7 +623,7 @@ extern struct usb_host_interface *usb_find_alt_setting(
  * USB hubs.  That makes it stay the same until systems are physically
  * reconfigured, by re-cabling a tree of USB devices or by moving USB host
  * controllers.  Adding and removing devices, including virtual root hubs
- * in host controller driver modules, does not change these path identifers;
+ * in host controller driver modules, does not change these path identifiers;
  * neither does rebooting or re-enumerating.  These are more useful identifiers
  * than changeable ("unstable") ones like bus numbers or device addresses.
  *
@@ -793,7 +793,7 @@ struct usbdrv_wrap {
  *	usb_set_intfdata() to associate driver-specific data with the
  *	interface.  It may also use usb_set_interface() to specify the
  *	appropriate altsetting.  If unwilling to manage the interface,
- *	return -ENODEV, if genuine IO errors occured, an appropriate
+ *	return -ENODEV, if genuine IO errors occurred, an appropriate
  *	negative errno value.
  * @disconnect: Called when the interface is no longer accessible, usually
  *	because its device has been (or is being) disconnected or the
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 3d29a7dcac2..882a084a841 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -188,7 +188,7 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
  * @bind() method is then used to initialize all the functions and then
  * call @usb_add_function() for them.
  *
- * Those functions would normally be independant of each other, but that's
+ * Those functions would normally be independent of each other, but that's
  * not mandatory.  CDC WMC devices are an example where functions often
  * depend on other functions, with some functions subsidiary to others.
  * Such interdependency may be managed in any way, so long as all of the
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 65638024519..e49dfd45baa 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -159,7 +159,7 @@ struct ehci_regs {
 #define USBMODE_CM_IDLE	(0<<0)		/* idle state */
 
 /* Moorestown has some non-standard registers, partially due to the fact that
- * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to
+ * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
  * PORTSCx
  */
 #define HOSTPC0		0x84		/* HOSTPC extension */
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index 6f649c13193..7587ef934ba 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -45,7 +45,7 @@ struct usb_functionfs_descs_head {
  * | off | name      | type         | description                          |
  * |-----+-----------+--------------+--------------------------------------|
  * |   0 | magic     | LE32         | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
- * |   4 | lenght    | LE32         | length of the whole data chunk       |
+ * |   4 | length    | LE32         | length of the whole data chunk       |
  * |   8 | fs_count  | LE32         | number of full-speed descriptors     |
  * |  12 | hs_count  | LE32         | number of high-speed descriptors     |
  * |  16 | fs_descrs | Descriptor[] | list of full-speed descriptors       |
@@ -86,7 +86,7 @@ struct usb_functionfs_strings_head {
  * |   0 | lang    | LE16              | language code                      |
  * |   2 | strings | String[str_count] | array of strings in given language |
  *
- * For each string ther is one strings entry (ie. there are str_count
+ * For each string there is one strings entry (ie. there are str_count
  * string entries).  Each String is a NUL terminated string encoded in
  * UTF-8.
  */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 006412ce230..e538172c0f6 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -72,7 +72,7 @@ struct usb_ep;
  * Bulk endpoints can use any size buffers, and can also be used for interrupt
  * transfers. interrupt-only endpoints can be much less functional.
  *
- * NOTE:  this is analagous to 'struct urb' on the host side, except that
+ * NOTE:  this is analogous to 'struct urb' on the host side, except that
  * it's thinner and promotes more pre-allocation.
  */
 
@@ -269,7 +269,7 @@ static inline void usb_ep_free_request(struct usb_ep *ep,
  *
  * Control endpoints ... after getting a setup() callback, the driver queues
  * one response (even if it would be zero length).  That enables the
- * status ack, after transfering data as specified in the response.  Setup
+ * status ack, after transferring data as specified in the response.  Setup
  * functions may return negative error codes to generate protocol stalls.
  * (Note that some USB device controllers disallow protocol stall responses
  * in some cases.)  When control responses are deferred (the response is
diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h
index 1d104086566..c8c52e3c91d 100644
--- a/include/linux/usb/midi.h
+++ b/include/linux/usb/midi.h
@@ -70,7 +70,7 @@ struct usb_midi_out_jack_descriptor {
 	__u8  bJackID;
 	__u8  bNrInputPins;		/* p */
 	struct usb_midi_source_pin pins[]; /* [p] */
-	/*__u8  iJack;  -- ommitted due to variable-sized pins[] */
+	/*__u8  iJack;  -- omitted due to variable-sized pins[] */
 } __attribute__ ((packed));
 
 #define USB_DT_MIDI_OUT_SIZE(p)	(7 + 2 * (p))
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 05ef5286198..88fceb718c7 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -256,6 +256,8 @@ struct rndis_keepalive_c {	/* IN (optionally OUT) */
 #define FLAG_RNDIS_PHYM_NOT_WIRELESS	0x0001
 #define FLAG_RNDIS_PHYM_WIRELESS	0x0002
 
+/* Flags for driver_info::data */
+#define RNDIS_DRIVER_DATA_POLL_STATUS	1	/* poll status before control */
 
 extern void rndis_status(struct usbnet *dev, struct urb *urb);
 extern int
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 3c7329b8ea0..605b0aa8d85 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -68,6 +68,7 @@ struct usbnet {
 #		define EVENT_RX_PAUSED	5
 #		define EVENT_DEV_WAKING 6
 #		define EVENT_DEV_ASLEEP 7
+#		define EVENT_DEV_OPEN	8
 };
 
 static inline struct usb_driver *driver_of(struct usb_interface *intf)
@@ -103,8 +104,8 @@ struct driver_info {
  * Indicates to usbnet, that USB driver accumulates multiple IP packets.
  * Affects statistic (counters) and short packet handling.
  */
-#define FLAG_MULTI_PACKET	0x1000
-#define FLAG_RX_ASSEMBLE	0x2000	/* rx packets may span >1 frames */
+#define FLAG_MULTI_PACKET	0x2000
+#define FLAG_RX_ASSEMBLE	0x4000	/* rx packets may span >1 frames */
 
 	/* init device ... can sleep, or cause probe() failure */
 	int	(*bind)(struct usbnet *, struct usb_interface *);
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
index 63ebdcc5dda..0c4d4ca370e 100644
--- a/include/linux/usb/wusb.h
+++ b/include/linux/usb/wusb.h
@@ -126,7 +126,7 @@ enum {
 /**
  * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
  *
- * Tells devices the host is going to stop sending MMCs and will dissapear.
+ * Tells devices the host is going to stop sending MMCs and will disappear.
  */
 struct wuie_channel_stop {
 	struct wuie_hdr hdr;
diff --git a/include/linux/uwb.h b/include/linux/uwb.h
index 7fc9746f22c..b0c564ec216 100644
--- a/include/linux/uwb.h
+++ b/include/linux/uwb.h
@@ -274,7 +274,7 @@ static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas)
 
 /**
  * struct uwb_drp_avail - a radio controller's view of MAS usage
- * @global:   MAS unused by neighbors (excluding reservations targetted
+ * @global:   MAS unused by neighbors (excluding reservations targeted
  *            or owned by the local radio controller) or the beaon period
  * @local:    MAS unused by local established reservations
  * @pending:  MAS unused by local pending reservations
@@ -702,10 +702,10 @@ void edc_init(struct edc *edc)
 	edc->timestart = jiffies;
 }
 
-/* Called when an error occured.
+/* Called when an error occurred.
  * This is way to determine if the number of acceptable errors per time
  * period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurences
+ * this scheme will not work, for example if there are periodic occurrences
  * of errors that straddle updates to the start time. This scheme is
  * sufficient for our usage.
  *
diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h
index 4b4fc0f4385..7b4842028ca 100644
--- a/include/linux/uwb/umc.h
+++ b/include/linux/uwb/umc.h
@@ -132,7 +132,7 @@ int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc);
  *
  * FIXME: This is as dirty as it gets, but we need some way to check
  * the correct type of umc_dev->parent (so that for example, we can
- * cast to pci_dev). Casting to pci_dev is necesary because at some
+ * cast to pci_dev). Casting to pci_dev is necessary because at some
  * point we need to request resources from the device. Mapping is
  * easily over come (ioremap and stuff are bus agnostic), but hooking
  * up to some error handlers (such as pci error handlers) might need
diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h
index 7054a7a8065..de5c1592102 100644
--- a/include/linux/v4l2-mediabus.h
+++ b/include/linux/v4l2-mediabus.h
@@ -47,7 +47,7 @@ enum v4l2_mbus_pixelcode {
 	V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007,
 	V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008,
 
-	/* YUV (including grey) - next is 0x2013 */
+	/* YUV (including grey) - next is 0x2014 */
 	V4L2_MBUS_FMT_Y8_1X8 = 0x2001,
 	V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002,
 	V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003,
@@ -60,6 +60,7 @@ enum v4l2_mbus_pixelcode {
 	V4L2_MBUS_FMT_Y10_1X10 = 0x200a,
 	V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b,
 	V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c,
+	V4L2_MBUS_FMT_Y12_1X12 = 0x2013,
 	V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f,
 	V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010,
 	V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011,
@@ -67,9 +68,11 @@ enum v4l2_mbus_pixelcode {
 	V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d,
 	V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e,
 
-	/* Bayer - next is 0x3013 */
+	/* Bayer - next is 0x3015 */
 	V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001,
+	V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013,
 	V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002,
+	V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014,
 	V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b,
 	V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c,
 	V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009,
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index e9e1524b582..9c3120dca29 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -78,7 +78,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev,
  *     wether the card is doing legacy decoding for that type of resource. If
  *     yes, the lock is "converted" into a legacy resource lock.
  *     The arbiter will first look for all VGA cards that might conflict
- *     and disable their IOs and/or Memory access, inlcuding VGA forwarding
+ *     and disable their IOs and/or Memory access, including VGA forwarding
  *     on P2P bridges if necessary, so that the requested resources can
  *     be used. Then, the card is marked as locking these resources and
  *     the IO and/or Memory accesse are enabled on the card (including
@@ -187,7 +187,7 @@ extern struct pci_dev *vga_default_device(void);
  *     vga_conflicts
  *
  *     Architectures should define this if they have several
- *     independant PCI domains that can afford concurrent VGA
+ *     independent PCI domains that can afford concurrent VGA
  *     decoding
  */
 
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index aa6c393b7ae..be82c8ead1a 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -308,6 +308,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
 #define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
 #define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
+#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
 #define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
 
 /* Palette formats */
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index 461c0119664..2b3831b58aa 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -58,6 +58,13 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
 		UNEVICTABLE_PGCLEARED,	/* on COW, page truncate */
 		UNEVICTABLE_PGSTRANDED,	/* unable to isolate on unlock */
 		UNEVICTABLE_MLOCKFREED,
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		THP_FAULT_ALLOC,
+		THP_FAULT_FALLBACK,
+		THP_COLLAPSE_ALLOC,
+		THP_COLLAPSE_ALLOC_FAILED,
+		THP_SPLIT,
+#endif
 		NR_VM_EVENT_ITEMS
 };
 
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
index 4fdcc563551..9f6b77af2f6 100644
--- a/include/linux/wimax.h
+++ b/include/linux/wimax.h
@@ -114,7 +114,7 @@ enum {
 	WIMAX_GNL_RESET_IFIDX = 1,
 };
 
-/* Atributes for wimax_state_get() */
+/* Attributes for wimax_state_get() */
 enum {
 	WIMAX_GNL_STGET_IFIDX = 1,
 };
diff --git a/include/linux/xilinxfb.h b/include/linux/xilinxfb.h
index f2463f559fb..5a155a96805 100644
--- a/include/linux/xilinxfb.h
+++ b/include/linux/xilinxfb.h
@@ -16,7 +16,7 @@
 /* ML300/403 reference design framebuffer driver platform data struct */
 struct xilinxfb_platform_data {
 	u32 rotate_screen;	/* Flag to rotate display 180 degrees */
-	u32 screen_height_mm;	/* Physical dimentions of screen in mm */
+	u32 screen_height_mm;	/* Physical dimensions of screen in mm */
 	u32 screen_width_mm;
 	u32 xres, yres;		/* resolution of screen in pixels */
 	u32 xvirt, yvirt;	/* resolution of memory buffer */
diff --git a/include/media/davinci/dm355_ccdc.h b/include/media/davinci/dm355_ccdc.h
index df8a7b10747..adf2fe4bf0b 100644
--- a/include/media/davinci/dm355_ccdc.h
+++ b/include/media/davinci/dm355_ccdc.h
@@ -193,7 +193,7 @@ struct ccdc_dft_corr_mem_ctl {
 #define CCDC_DFT_TABLE_SIZE	16
 /*
  * Main Structure for vertical defect correction. Vertical defect
- * correction can correct upto 16 defects if defects less than 16
+ * correction can correct up to 16 defects if defects less than 16
  * then pad the rest with 0
  */
 struct ccdc_vertical_dft {
diff --git a/include/media/davinci/isif.h b/include/media/davinci/isif.h
index b0b74ad618c..7f3d76a4b9e 100644
--- a/include/media/davinci/isif.h
+++ b/include/media/davinci/isif.h
@@ -199,7 +199,7 @@ struct isif_black_clamp {
 };
 
 /*************************************************************************
-** Color Space Convertion (CSC)
+** Color Space Conversion (CSC)
 *************************************************************************/
 #define ISIF_CSC_NUM_COEFF	16
 struct isif_color_space_conv {
diff --git a/include/media/lirc.h b/include/media/lirc.h
index 6678a169fd9..4b3ab2966b5 100644
--- a/include/media/lirc.h
+++ b/include/media/lirc.h
@@ -137,7 +137,7 @@
  */
 #define LIRC_SET_REC_FILTER_SPACE      _IOW('i', 0x0000001b, __u32)
 /*
- * if filter cannot be set independantly for pulse/space, this should
+ * if filter cannot be set independently for pulse/space, this should
  * be used
  */
 #define LIRC_SET_REC_FILTER            _IOW('i', 0x0000001c, __u32)
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
index bd102cf509a..d61febfb166 100644
--- a/include/media/v4l2-device.h
+++ b/include/media/v4l2-device.h
@@ -163,7 +163,7 @@ v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev);
 ({									\
 	struct v4l2_subdev *__sd;					\
 	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, cond, o,	\
-						f, args...);		\
+						f , ##args);		\
 })
 
 /* Call the specified callback for all subdevs matching grp_id (if 0, then
diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h
index 6b75a697134..d2df55b0c21 100644
--- a/include/net/9p/9p.h
+++ b/include/net/9p/9p.h
@@ -119,7 +119,7 @@ do { \
  * @P9_TREAD: request to transfer data from a file or directory
  * @P9_RREAD: response with data requested
  * @P9_TWRITE: reuqest to transfer data to a file
- * @P9_RWRITE: response with out much data was transfered to file
+ * @P9_RWRITE: response with out much data was transferred to file
  * @P9_TCLUNK: forget about a handle to an entity within the file system
  * @P9_RCLUNK: response when server has forgotten about the handle
  * @P9_TREMOVE: request to remove an entity from the hierarchy
@@ -139,8 +139,6 @@ do { \
  */
 
 enum p9_msg_t {
-	P9_TSYNCFS = 0,
-	P9_RSYNCFS,
 	P9_TLERROR = 6,
 	P9_RLERROR,
 	P9_TSTATFS = 8,
@@ -294,7 +292,7 @@ enum p9_perm_t {
  *
  * QID types are a subset of permissions - they are primarily
  * used to differentiate semantics for a file system entity via
- * a jump-table.  Their value is also the most signifigant 16 bits
+ * a jump-table.  Their value is also the most significant 16 bits
  * of the permission_t
  *
  * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat
@@ -366,8 +364,8 @@ struct p9_qid {
 /**
  * struct p9_stat - file system metadata information
  * @size: length prefix for this stat structure instance
- * @type: the type of the server (equivilent to a major number)
- * @dev: the sub-type of the server (equivilent to a minor number)
+ * @type: the type of the server (equivalent to a major number)
+ * @dev: the sub-type of the server (equivalent to a minor number)
  * @qid: unique id from the server of type &p9_qid
  * @mode: Plan 9 format permissions of type &p9_perm_t
  * @atime: Last access/read time
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 0a30977e3c1..051a99f7976 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -101,7 +101,7 @@ enum p9_req_status_t {
  * Transport use an array to track outstanding requests
  * instead of a list.  While this may incurr overhead during initial
  * allocation or expansion, it makes request lookup much easier as the
- * tag id is a index into an array.  (We use tag+1 so that we can accomodate
+ * tag id is a index into an array.  (We use tag+1 so that we can accommodate
  * the -1 tag for the T_VERSION request).
  * This also has the nice effect of only having to allocate wait_queues
  * once, instead of constantly allocating and freeing them.  Its possible
@@ -218,8 +218,8 @@ void p9_client_disconnect(struct p9_client *clnt);
 void p9_client_begin_disconnect(struct p9_client *clnt);
 struct p9_fid *p9_client_attach(struct p9_client *clnt, struct p9_fid *afid,
 					char *uname, u32 n_uname, char *aname);
-struct p9_fid *p9_client_walk(struct p9_fid *oldfid, int nwname, char **wnames,
-								int clone);
+struct p9_fid *p9_client_walk(struct p9_fid *oldfid, uint16_t nwname,
+		char **wnames, int clone);
 int p9_client_open(struct p9_fid *fid, int mode);
 int p9_client_fcreate(struct p9_fid *fid, char *name, u32 perm, int mode,
 							char *extension);
@@ -230,7 +230,6 @@ int p9_client_create_dotl(struct p9_fid *ofid, char *name, u32 flags, u32 mode,
 		gid_t gid, struct p9_qid *qid);
 int p9_client_clunk(struct p9_fid *fid);
 int p9_client_fsync(struct p9_fid *fid, int datasync);
-int p9_client_sync_fs(struct p9_fid *fid);
 int p9_client_remove(struct p9_fid *fid);
 int p9_client_read(struct p9_fid *fid, char *data, char __user *udata,
 							u64 offset, u32 count);
diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h
index 82868f18c57..8f08c736c4c 100644
--- a/include/net/9p/transport.h
+++ b/include/net/9p/transport.h
@@ -30,7 +30,7 @@
 
 /* Default. Add Payload to PDU before sending it down to transport layer */
 #define P9_TRANS_PREF_PAYLOAD_DEF  0x0
-/* Send pay load seperately to transport layer along with PDU.*/
+/* Send pay load separately to transport layer along with PDU.*/
 #define P9_TRANS_PREF_PAYLOAD_SEP  0x1
 
 /**
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 23710aa6a18..582e4ae7075 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -42,8 +42,6 @@ struct prefix_info {
 };
 
 
-#ifdef __KERNEL__
-
 #include <linux/netdevice.h>
 #include <net/if_inet6.h>
 #include <net/ipv6.h>
@@ -61,16 +59,16 @@ extern int			addrconf_set_dstaddr(struct net *net,
 						     void __user *arg);
 
 extern int			ipv6_chk_addr(struct net *net,
-					      struct in6_addr *addr,
+					      const struct in6_addr *addr,
 					      struct net_device *dev,
 					      int strict);
 
 #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
 extern int			ipv6_chk_home_addr(struct net *net,
-						   struct in6_addr *addr);
+						   const struct in6_addr *addr);
 #endif
 
-extern int			ipv6_chk_prefix(struct in6_addr *addr,
+extern int			ipv6_chk_prefix(const struct in6_addr *addr,
 						struct net_device *dev);
 
 extern struct inet6_ifaddr      *ipv6_get_ifaddr(struct net *net,
@@ -89,9 +87,9 @@ extern int			ipv6_get_lladdr(struct net_device *dev,
 extern int 			ipv6_rcv_saddr_equal(const struct sock *sk,
 						    const struct sock *sk2);
 extern void			addrconf_join_solict(struct net_device *dev,
-					struct in6_addr *addr);
+					const struct in6_addr *addr);
 extern void			addrconf_leave_solict(struct inet6_dev *idev,
-					struct in6_addr *addr);
+					const struct in6_addr *addr);
 
 static inline unsigned long addrconf_timeout_fixup(u32 timeout,
 						    unsigned unit)
@@ -158,15 +156,15 @@ extern void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len);
 /*
  *	anycast prototypes (anycast.c)
  */
-extern int ipv6_sock_ac_join(struct sock *sk,int ifindex,struct in6_addr *addr);
-extern int ipv6_sock_ac_drop(struct sock *sk,int ifindex,struct in6_addr *addr);
+extern int ipv6_sock_ac_join(struct sock *sk,int ifindex, const struct in6_addr *addr);
+extern int ipv6_sock_ac_drop(struct sock *sk,int ifindex, const struct in6_addr *addr);
 extern void ipv6_sock_ac_close(struct sock *sk);
-extern int inet6_ac_check(struct sock *sk, struct in6_addr *addr, int ifindex);
+extern int inet6_ac_check(struct sock *sk, const struct in6_addr *addr, int ifindex);
 
-extern int ipv6_dev_ac_inc(struct net_device *dev, struct in6_addr *addr);
-extern int __ipv6_dev_ac_dec(struct inet6_dev *idev, struct in6_addr *addr);
+extern int ipv6_dev_ac_inc(struct net_device *dev, const struct in6_addr *addr);
+extern int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr);
 extern int ipv6_chk_acast_addr(struct net *net, struct net_device *dev,
-			       struct in6_addr *addr);
+			       const struct in6_addr *addr);
 
 
 /* Device notifier */
@@ -285,4 +283,3 @@ extern void if6_proc_exit(void);
 #endif
 
 #endif
-#endif
diff --git a/include/net/af_rxrpc.h b/include/net/af_rxrpc.h
index 00c2eaa07c2..03e6e945362 100644
--- a/include/net/af_rxrpc.h
+++ b/include/net/af_rxrpc.h
@@ -12,8 +12,6 @@
 #ifndef _NET_RXRPC_H
 #define _NET_RXRPC_H
 
-#ifdef __KERNEL__
-
 #include <linux/rxrpc.h>
 
 struct rxrpc_call;
@@ -53,5 +51,4 @@ extern struct rxrpc_call *rxrpc_kernel_accept_call(struct socket *,
 						   unsigned long);
 extern int rxrpc_kernel_reject_call(struct socket *);
 
-#endif /* __KERNEL__ */
 #endif /* _NET_RXRPC_H */
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 18e5c3f6758..91ab5b01678 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -41,7 +41,6 @@ struct unix_skb_parms {
 				spin_lock_nested(&unix_sk(s)->lock, \
 				SINGLE_DEPTH_NESTING)
 
-#ifdef __KERNEL__
 /* The AF_UNIX socket */
 struct unix_sock {
 	/* WARNING: sk has to be the first member */
@@ -72,4 +71,3 @@ static inline int unix_sysctl_register(struct net *net) { return 0; }
 static inline void unix_sysctl_unregister(struct net *net) {}
 #endif
 #endif
-#endif
diff --git a/include/net/atmclip.h b/include/net/atmclip.h
index 467c531b8a7..497ef6444a7 100644
--- a/include/net/atmclip.h
+++ b/include/net/atmclip.h
@@ -54,8 +54,6 @@ struct clip_priv {
 };
 
 
-#ifdef __KERNEL__
 extern struct neigh_table *clip_tbl_hook;
-#endif
 
 #endif
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index e0a3cf1234b..0c20227e57f 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1076,7 +1076,6 @@ struct hci_sco_hdr {
 	__u8	dlen;
 } __packed;
 
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
 static inline struct hci_event_hdr *hci_event_hdr(const struct sk_buff *skb)
 {
@@ -1092,7 +1091,6 @@ static inline struct hci_sco_hdr *hci_sco_hdr(const struct sk_buff *skb)
 {
 	return (struct hci_sco_hdr *) skb->data;
 }
-#endif
 
 /* Command opcode pack/unpack */
 #define hci_opcode_pack(ogf, ocf)	(__u16) ((ocf & 0x03ff)|(ogf << 10))
diff --git a/include/net/caif/caif_dev.h b/include/net/caif/caif_dev.h
index 8eff83b9536..c011281d92c 100644
--- a/include/net/caif/caif_dev.h
+++ b/include/net/caif/caif_dev.h
@@ -11,6 +11,7 @@
 #include <net/caif/cfcnfg.h>
 #include <linux/caif/caif_socket.h>
 #include <linux/if.h>
+#include <linux/net.h>
 
 /**
  * struct caif_param - CAIF parameters.
@@ -62,46 +63,45 @@ struct caif_connect_request {
  * E.g. CAIF Socket will call this function for each socket it connects
  * and have one client_layer instance for each socket.
  */
-int caif_connect_client(struct caif_connect_request *conn_req,
+int caif_connect_client(struct net *net,
+			struct caif_connect_request *conn_req,
 			struct cflayer *client_layer, int *ifindex,
 			int *headroom, int *tailroom);
 
 /**
  * caif_disconnect_client - Disconnects a client from the CAIF stack.
  *
- * @client_layer: Client layer to be removed.
+ * @client_layer: Client layer to be disconnected.
  */
-int caif_disconnect_client(struct cflayer *client_layer);
+int caif_disconnect_client(struct net *net, struct cflayer *client_layer);
+
 
 /**
- * caif_release_client - Release adaptation layer reference to client.
+ * caif_client_register_refcnt - register ref-count functions provided by client.
  *
- * @client_layer: Client layer.
+ * @adapt_layer: Client layer using CAIF Stack.
+ * @hold:	Function provided by client layer increasing ref-count
+ * @put:	Function provided by client layer decreasing ref-count
  *
- * Releases a client/adaptation layer use of the caif stack.
- * This function must be used after caif_disconnect_client to
- * decrease the reference count of the service layer.
- */
-void caif_release_client(struct cflayer *client_layer);
-
-/**
- * connect_req_to_link_param - Translate configuration parameters
- *				from socket format to internal format.
- * @cnfg:	Pointer to configuration handler
- * @con_req:	Configuration parameters supplied in function
- *		caif_connect_client
- * @channel_setup_param: Parameters supplied to the CAIF Core stack for
- *			 setting up channels.
+ * Client of the CAIF Stack must register functions for reference counting.
+ * These functions are called by the CAIF Stack for every upstream packet,
+ * and must therefore be implemented efficiently.
  *
+ * Client should call caif_free_client when reference count degrease to zero.
  */
-int connect_req_to_link_param(struct cfcnfg *cnfg,
-				struct caif_connect_request *con_req,
-				struct cfctrl_link_param *channel_setup_param);
 
+void caif_client_register_refcnt(struct cflayer *adapt_layer,
+					void (*hold)(struct cflayer *lyr),
+					void (*put)(struct cflayer *lyr));
 /**
- * get_caif_conf() - Get the configuration handler.
+ * caif_free_client - Free memory used to manage the client in the CAIF Stack.
+ *
+ * @client_layer: Client layer to be removed.
+ *
+ * This function must be called from client layer in order to free memory.
+ * Caller must guarantee that no packets are in flight upstream when calling
+ * this function.
  */
-struct cfcnfg *get_caif_conf(void);
-
+void caif_free_client(struct cflayer *adap_layer);
 
 #endif /* CAIF_DEV_H_ */
diff --git a/include/net/caif/cfcnfg.h b/include/net/caif/cfcnfg.h
index f688478bfb8..3e93a4a4b67 100644
--- a/include/net/caif/cfcnfg.h
+++ b/include/net/caif/cfcnfg.h
@@ -46,6 +46,12 @@ enum cfcnfg_phy_preference {
 };
 
 /**
+ * cfcnfg_create() - Get the CAIF configuration object given network.
+ * @net:	Network for the CAIF configuration object.
+ */
+struct cfcnfg *get_cfcnfg(struct net *net);
+
+/**
  * cfcnfg_create() - Create the CAIF configuration object.
  */
 struct cfcnfg *cfcnfg_create(void);
@@ -65,8 +71,6 @@ void cfcnfg_remove(struct cfcnfg *cfg);
  * @dev:	Pointer to link layer device
  * @phy_layer:	Specify the physical layer. The transmit function
  *		MUST be set in the structure.
- * @phyid:	The assigned physical ID for this layer, used in
- *		cfcnfg_add_adapt_layer to specify PHY for the link.
  * @pref:	The phy (link layer) preference.
  * @fcs:	Specify if checksum is used in CAIF Framing Layer.
  * @stx:	Specify if Start Of Frame eXtention is used.
@@ -75,7 +79,7 @@ void cfcnfg_remove(struct cfcnfg *cfg);
 void
 cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type,
 		     struct net_device *dev, struct cflayer *phy_layer,
-		     u16 *phyid, enum cfcnfg_phy_preference pref,
+		     enum cfcnfg_phy_preference pref,
 		     bool fcs, bool stx);
 
 /**
@@ -88,61 +92,12 @@ cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type,
 int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer);
 
 /**
- * cfcnfg_disconn_adapt_layer - Disconnects an adaptation layer.
- *
- * @cnfg:	Pointer to a CAIF configuration object, created by
- *		cfcnfg_create().
- * @adap_layer: Adaptation layer to be removed.
- */
-int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg,
-			struct cflayer *adap_layer);
-
-/**
- * cfcnfg_release_adap_layer - Used by client to release the adaptation layer.
- *
- * @adap_layer: Adaptation layer.
- */
-void cfcnfg_release_adap_layer(struct cflayer *adap_layer);
-
-/**
- * cfcnfg_add_adaptation_layer - Add an adaptation layer to the CAIF stack.
- *
- * The adaptation Layer is where the interface to application or higher-level
- * driver functionality is implemented.
- *
- * @cnfg:		Pointer to a CAIF configuration object, created by
- *			cfcnfg_create().
- * @param:		Link setup parameters.
- * @adap_layer:		Specify the adaptation layer; the receive and
- *			flow-control functions MUST be set in the structure.
- * @ifindex:		Link layer interface index used for this connection.
- * @proto_head:		Protocol head-space needed by CAIF protocol,
- *			excluding link layer.
- * @proto_tail:		Protocol tail-space needed by CAIF protocol,
- *			excluding link layer.
- */
-int cfcnfg_add_adaptation_layer(struct cfcnfg *cnfg,
-			    struct cfctrl_link_param *param,
-			    struct cflayer *adap_layer,
-			    int *ifindex,
-			    int *proto_head,
-			    int *proto_tail);
-
-/**
- * cfcnfg_get_phyid() - Get physical ID, given type.
- * Returns one of the physical interfaces matching the given type.
- * Zero if no match is found.
+ * cfcnfg_set_phy_state() - Set the state of the physical interface device.
  * @cnfg:	Configuration object
- * @phy_pref:	Caif Link Layer preference
+ * @phy_layer:	Physical Layer representation
+ * @up:	State of device
  */
-struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
-		     enum cfcnfg_phy_preference phy_pref);
+int cfcnfg_set_phy_state(struct cfcnfg *cnfg, struct cflayer *phy_layer,
+				bool up);
 
-/**
- * cfcnfg_get_id_from_ifi() - Get the Physical Identifier of ifindex,
- * 			it matches caif physical id with the kernel interface id.
- * @cnfg:	Configuration object
- * @ifi:	ifindex obtained from socket.c bindtodevice.
- */
-int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi);
 #endif				/* CFCNFG_H_ */
diff --git a/include/net/caif/cfctrl.h b/include/net/caif/cfctrl.h
index e54f6396fa4..9e5425b4a1d 100644
--- a/include/net/caif/cfctrl.h
+++ b/include/net/caif/cfctrl.h
@@ -121,19 +121,10 @@ int cfctrl_linkup_request(struct cflayer *cfctrl,
 			   struct cflayer *user_layer);
 int  cfctrl_linkdown_req(struct cflayer *cfctrl, u8 linkid,
 			 struct cflayer *client);
-void cfctrl_sleep_req(struct cflayer *cfctrl);
-void cfctrl_wake_req(struct cflayer *cfctrl);
-void cfctrl_getstartreason_req(struct cflayer *cfctrl);
+
 struct cflayer *cfctrl_create(void);
-void cfctrl_set_dnlayer(struct cflayer *this, struct cflayer *dn);
-void cfctrl_set_uplayer(struct cflayer *this, struct cflayer *up);
 struct cfctrl_rsp *cfctrl_get_respfuncs(struct cflayer *layer);
-bool cfctrl_req_eq(struct cfctrl_request_info *r1,
-		   struct cfctrl_request_info *r2);
-void cfctrl_insert_req(struct cfctrl *ctrl,
-			      struct cfctrl_request_info *req);
-struct cfctrl_request_info *cfctrl_remove_req(struct cfctrl *ctrl,
-					      struct cfctrl_request_info *req);
-void cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer);
+int cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer);
+void cfctrl_remove(struct cflayer *layr);
 
 #endif				/* CFCTRL_H_ */
diff --git a/include/net/caif/cffrml.h b/include/net/caif/cffrml.h
index 3f14d2e1ce6..afac1a48cce 100644
--- a/include/net/caif/cffrml.h
+++ b/include/net/caif/cffrml.h
@@ -7,10 +7,15 @@
 #ifndef CFFRML_H_
 #define CFFRML_H_
 #include <net/caif/caif_layer.h>
+#include <linux/netdevice.h>
 
 struct cffrml;
-struct cflayer *cffrml_create(u16 phyid, bool DoFCS);
+struct cflayer *cffrml_create(u16 phyid, bool use_fcs);
+void cffrml_free(struct cflayer *layr);
 void cffrml_set_uplayer(struct cflayer *this, struct cflayer *up);
 void cffrml_set_dnlayer(struct cflayer *this, struct cflayer *dn);
+void cffrml_put(struct cflayer *layr);
+void cffrml_hold(struct cflayer *layr);
+int cffrml_refcnt_read(struct cflayer *layr);
 
 #endif /* CFFRML_H_ */
diff --git a/include/net/caif/cfmuxl.h b/include/net/caif/cfmuxl.h
index 4e1b4f33423..5847a196b8a 100644
--- a/include/net/caif/cfmuxl.h
+++ b/include/net/caif/cfmuxl.h
@@ -16,7 +16,5 @@ int cfmuxl_set_uplayer(struct cflayer *layr, struct cflayer *up, u8 linkid);
 struct cflayer *cfmuxl_remove_dnlayer(struct cflayer *layr, u8 phyid);
 int cfmuxl_set_dnlayer(struct cflayer *layr, struct cflayer *up, u8 phyid);
 struct cflayer *cfmuxl_remove_uplayer(struct cflayer *layr, u8 linkid);
-bool cfmuxl_is_phy_inuse(struct cflayer *layr, u8 phyid);
-u8 cfmuxl_get_phyid(struct cflayer *layr, u8 channel_id);
 
 #endif				/* CFMUXL_H_ */
diff --git a/include/net/caif/cfpkt.h b/include/net/caif/cfpkt.h
index fbc681beff5..6bd200a4754 100644
--- a/include/net/caif/cfpkt.h
+++ b/include/net/caif/cfpkt.h
@@ -16,12 +16,6 @@ struct cfpkt;
  */
 struct cfpkt *cfpkt_create(u16 len);
 
-/* Create a CAIF packet.
- * data Data to copy.
- * len Length of packet to be created
- * @return New packet.
- */
-struct cfpkt *cfpkt_create_uplink(const unsigned char *data, unsigned int len);
 /*
  * Destroy a CAIF Packet.
  * pkt Packet to be destoyed.
@@ -181,22 +175,6 @@ u16 cfpkt_iterate(struct cfpkt *pkt,
 		u16 (*iter_func)(u16 chks, void *buf, u16 len),
 		u16 data);
 
-/* Append by giving user access to packet buffer
- * cfpkt Packet to append to
- * buf Buffer inside pkt that user shall copy data into
- * buflen Length of buffer and number of bytes added to packet
- * @return 0 on error, 1 on success
- */
-int cfpkt_raw_append(struct cfpkt *cfpkt, void **buf, unsigned int buflen);
-
-/* Extract by giving user access to packet buffer
- * cfpkt Packet to extract from
- * buf Buffer inside pkt that user shall copy data from
- * buflen Length of buffer and number of bytes removed from packet
- * @return 0 on error, 1 on success
- */
-int cfpkt_raw_extract(struct cfpkt *cfpkt, void **buf, unsigned int buflen);
-
 /* Map from a "native" packet (e.g. Linux Socket Buffer) to a CAIF packet.
  *  dir - Direction indicating whether this packet is to be sent or received.
  *  nativepkt  - The native packet to be transformed to a CAIF packet
@@ -210,59 +188,6 @@ struct cfpkt *cfpkt_fromnative(enum caif_direction dir, void *nativepkt);
  */
 void *cfpkt_tonative(struct cfpkt *pkt);
 
-/*
- * Insert a packet in the packet queue.
- * pktq Packet queue to insert into
- * pkt Packet to be inserted in queue
- * prio Priority of packet
- */
-void cfpkt_queue(struct cfpktq *pktq, struct cfpkt *pkt,
-		 unsigned short prio);
-
-/*
- * Remove a packet from the packet queue.
- * pktq Packet queue to fetch packets from.
- * @return Dequeued packet.
- */
-struct cfpkt *cfpkt_dequeue(struct cfpktq *pktq);
-
-/*
- * Peek into a packet from the packet queue.
- * pktq Packet queue to fetch packets from.
- * @return Peeked packet.
- */
-struct cfpkt *cfpkt_qpeek(struct cfpktq *pktq);
-
-/*
- * Initiates the packet queue.
- * @return Pointer to new packet queue.
- */
-struct cfpktq *cfpktq_create(void);
-
-/*
- * Get the number of packets in the queue.
- * pktq Packet queue to fetch count from.
- * @return Number of packets in queue.
- */
-int cfpkt_qcount(struct cfpktq *pktq);
-
-/*
- * Put content of packet into buffer for debuging purposes.
- * pkt Packet to copy data from
- * buf Buffer to copy data into
- * buflen Length of data to copy
- * @return Pointer to copied data
- */
-char *cfpkt_log_pkt(struct cfpkt *pkt, char *buf, int buflen);
-
-/*
- * Clones a packet and releases the original packet.
- * This is used for taking ownership of a packet e.g queueing.
- * pkt Packet to clone and release.
- * @return Cloned packet.
- */
-struct cfpkt *cfpkt_clone_release(struct cfpkt *pkt);
-
 
 /*
  * Returns packet information for a packet.
@@ -270,5 +195,4 @@ struct cfpkt *cfpkt_clone_release(struct cfpkt *pkt);
  * @return Packet information
  */
 struct caif_payload_info *cfpkt_info(struct cfpkt *pkt);
-/*! @} */
 #endif				/* CFPKT_H_ */
diff --git a/include/net/caif/cfsrvl.h b/include/net/caif/cfsrvl.h
index b1fa87ee099..0f590524184 100644
--- a/include/net/caif/cfsrvl.h
+++ b/include/net/caif/cfsrvl.h
@@ -10,6 +10,7 @@
 #include <linux/stddef.h>
 #include <linux/types.h>
 #include <linux/kref.h>
+#include <linux/rculist.h>
 
 struct cfsrvl {
 	struct cflayer layer;
@@ -17,12 +18,13 @@ struct cfsrvl {
 	bool phy_flow_on;
 	bool modem_flow_on;
 	bool supports_flowctrl;
-	void (*release)(struct kref *);
+	void (*release)(struct cflayer *layer);
 	struct dev_info dev_info;
-	struct kref ref;
+	void (*hold)(struct cflayer *lyr);
+	void (*put)(struct cflayer *lyr);
+	struct rcu_head rcu;
 };
 
-void cfsrvl_release(struct kref *kref);
 struct cflayer *cfvei_create(u8 linkid, struct dev_info *dev_info);
 struct cflayer *cfdgml_create(u8 linkid, struct dev_info *dev_info);
 struct cflayer *cfutill_create(u8 linkid, struct dev_info *dev_info);
@@ -30,8 +32,12 @@ struct cflayer *cfvidl_create(u8 linkid, struct dev_info *dev_info);
 struct cflayer *cfrfml_create(u8 linkid, struct dev_info *dev_info,
 				int mtu_size);
 struct cflayer *cfdbgl_create(u8 linkid, struct dev_info *dev_info);
+
+void cfsrvl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
+		     int phyid);
+
 bool cfsrvl_phyid_match(struct cflayer *layer, int phyid);
-void cfservl_destroy(struct cflayer *layer);
+
 void cfsrvl_init(struct cfsrvl *service,
 			u8 channel_id,
 			struct dev_info *dev_info,
@@ -41,23 +47,19 @@ u8 cfsrvl_getphyid(struct cflayer *layer);
 
 static inline void cfsrvl_get(struct cflayer *layr)
 {
-	struct cfsrvl *s;
-	if (layr == NULL)
+	struct cfsrvl *s = container_of(layr, struct cfsrvl, layer);
+	if (layr == NULL || layr->up == NULL || s->hold == NULL)
 		return;
-	s = container_of(layr, struct cfsrvl, layer);
-	kref_get(&s->ref);
+
+	s->hold(layr->up);
 }
 
 static inline void cfsrvl_put(struct cflayer *layr)
 {
-	struct cfsrvl *s;
-	if (layr == NULL)
+	struct cfsrvl *s = container_of(layr, struct cfsrvl, layer);
+	if (layr == NULL || layr->up == NULL || s->hold == NULL)
 		return;
-	s = container_of(layr, struct cfsrvl, layer);
 
-	WARN_ON(!s->release);
-	if (s->release)
-		kref_put(&s->ref, s->release);
+	s->put(layr->up);
 }
-
 #endif				/* CFSRVL_H_ */
diff --git a/include/net/compat.h b/include/net/compat.h
index 28d5428ec6a..9ee75edcc29 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -43,6 +43,8 @@ extern int compat_sock_get_timestampns(struct sock *, struct timespec __user *);
 extern int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *);
 extern int verify_compat_iovec(struct msghdr *, struct iovec *, struct sockaddr *, int);
 extern asmlinkage long compat_sys_sendmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_sendmmsg(int, struct compat_mmsghdr __user *,
+					   unsigned, unsigned);
 extern asmlinkage long compat_sys_recvmsg(int,struct compat_msghdr __user *,unsigned);
 extern asmlinkage long compat_sys_recvmmsg(int, struct compat_mmsghdr __user *,
 					   unsigned, unsigned,
diff --git a/include/net/dst.h b/include/net/dst.h
index 75b95df4afe..07a0402c52e 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -16,13 +16,6 @@
 #include <net/neighbour.h>
 #include <asm/processor.h>
 
-/*
- * 0 - no debugging messages
- * 1 - rare events and bugs (default)
- * 2 - trace mode.
- */
-#define RT_CACHE_DEBUG		0
-
 #define DST_GC_MIN	(HZ/10)
 #define DST_GC_INC	(HZ/2)
 #define DST_GC_MAX	(120*HZ)
@@ -92,8 +85,6 @@ struct dst_entry {
 	};
 };
 
-#ifdef __KERNEL__
-
 extern u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old);
 extern const u32 dst_default_metrics[RTAX_MAX];
 
@@ -352,7 +343,8 @@ static inline struct dst_entry *skb_dst_pop(struct sk_buff *skb)
 }
 
 extern int dst_discard(struct sk_buff *skb);
-extern void *dst_alloc(struct dst_ops * ops, int initial_ref);
+extern void *dst_alloc(struct dst_ops * ops, struct net_device *dev,
+		       int initial_ref, int initial_obsolete, int flags);
 extern void __dst_free(struct dst_entry * dst);
 extern struct dst_entry *dst_destroy(struct dst_entry * dst);
 
@@ -438,6 +430,5 @@ extern struct dst_entry *xfrm_lookup(struct net *net, struct dst_entry *dst_orig
 				     const struct flowi *fl, struct sock *sk,
 				     int flags);
 #endif
-#endif
 
 #endif /* _NET_DST_H */
diff --git a/include/net/flow.h b/include/net/flow.h
index 7fe5a0f9483..c6d5fe5ec1b 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -26,8 +26,8 @@ struct flowi_common {
 
 union flowi_uli {
 	struct {
-		__be16	sport;
 		__be16	dport;
+		__be16	sport;
 	} ports;
 
 	struct {
@@ -36,8 +36,8 @@ union flowi_uli {
 	} icmpt;
 
 	struct {
-		__le16	sport;
 		__le16	dport;
+		__le16	sport;
 	} dnports;
 
 	__be32		spi;
@@ -70,6 +70,27 @@ struct flowi4 {
 #define fl4_gre_key		uli.gre_key
 };
 
+static inline void flowi4_init_output(struct flowi4 *fl4, int oif,
+				      __u32 mark, __u8 tos, __u8 scope,
+				      __u8 proto, __u8 flags,
+				      __be32 daddr, __be32 saddr,
+				      __be16 dport, __be32 sport)
+{
+	fl4->flowi4_oif = oif;
+	fl4->flowi4_iif = 0;
+	fl4->flowi4_mark = mark;
+	fl4->flowi4_tos = tos;
+	fl4->flowi4_scope = scope;
+	fl4->flowi4_proto = proto;
+	fl4->flowi4_flags = flags;
+	fl4->flowi4_secid = 0;
+	fl4->daddr = daddr;
+	fl4->saddr = saddr;
+	fl4->fl4_dport = dport;
+	fl4->fl4_sport = sport;
+}
+				      
+
 struct flowi6 {
 	struct flowi_common	__fl_common;
 #define flowi6_oif		__fl_common.flowic_oif
diff --git a/include/net/garp.h b/include/net/garp.h
index f4c295984c4..834d8add9e5 100644
--- a/include/net/garp.h
+++ b/include/net/garp.h
@@ -104,10 +104,12 @@ struct garp_applicant {
 	struct sk_buff_head	queue;
 	struct sk_buff		*pdu;
 	struct rb_root		gid;
+	struct rcu_head		rcu;
 };
 
 struct garp_port {
 	struct garp_applicant __rcu	*applicants[GARP_APPLICATION_MAX + 1];
+	struct rcu_head			rcu;
 };
 
 extern int	garp_register_application(struct garp_application *app);
diff --git a/include/net/gen_stats.h b/include/net/gen_stats.h
index fa157712e98..a79b6cfb02a 100644
--- a/include/net/gen_stats.h
+++ b/include/net/gen_stats.h
@@ -11,7 +11,7 @@ struct gnet_dump {
 	struct sk_buff *  skb;
 	struct nlattr *   tail;
 
-	/* Backward compatability */
+	/* Backward compatibility */
 	int               compat_tc_stats;
 	int               compat_xstats;
 	void *            xstats;
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index fccc2180c61..11cf373970a 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -30,8 +30,6 @@
 #define IF_PREFIX_ONLINK	0x01
 #define IF_PREFIX_AUTOCONF	0x02
 
-#ifdef __KERNEL__
-
 enum {
 	INET6_IFADDR_STATE_DAD,
 	INET6_IFADDR_STATE_POSTDAD,
@@ -156,8 +154,8 @@ struct ifacaddr6 {
 struct ipv6_devstat {
 	struct proc_dir_entry	*proc_dir_entry;
 	DEFINE_SNMP_STAT(struct ipstats_mib, ipv6);
-	DEFINE_SNMP_STAT(struct icmpv6_mib, icmpv6);
-	DEFINE_SNMP_STAT(struct icmpv6msg_mib, icmpv6msg);
+	DEFINE_SNMP_STAT_ATOMIC(struct icmpv6_mib_device, icmpv6dev);
+	DEFINE_SNMP_STAT_ATOMIC(struct icmpv6msg_mib_device, icmpv6msgdev);
 };
 
 struct inet6_dev {
@@ -196,7 +194,7 @@ struct inet6_dev {
 	struct rcu_head		rcu;
 };
 
-static inline void ipv6_eth_mc_map(struct in6_addr *addr, char *buf)
+static inline void ipv6_eth_mc_map(const struct in6_addr *addr, char *buf)
 {
 	/*
 	 *	+-------+-------+-------+-------+-------+-------+
@@ -210,7 +208,7 @@ static inline void ipv6_eth_mc_map(struct in6_addr *addr, char *buf)
 	memcpy(buf + 2, &addr->s6_addr32[3], sizeof(__u32));
 }
 
-static inline void ipv6_tr_mc_map(struct in6_addr *addr, char *buf)
+static inline void ipv6_tr_mc_map(const struct in6_addr *addr, char *buf)
 {
 	/* All nodes FF01::1, FF02::1, FF02::1:FFxx:xxxx */
 
@@ -303,4 +301,3 @@ static inline int ipv6_ipgre_mc_map(const struct in6_addr *addr,
 }
 
 #endif
-#endif
diff --git a/include/net/inet6_connection_sock.h b/include/net/inet6_connection_sock.h
index ff013505236..3207e58ee01 100644
--- a/include/net/inet6_connection_sock.h
+++ b/include/net/inet6_connection_sock.h
@@ -41,5 +41,5 @@ extern void inet6_csk_reqsk_queue_hash_add(struct sock *sk,
 
 extern void inet6_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr);
 
-extern int inet6_csk_xmit(struct sk_buff *skb);
+extern int inet6_csk_xmit(struct sk_buff *skb, struct flowi *fl);
 #endif /* _INET6_CONNECTION_SOCK_H */
diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
index 6ac4e3b5007..e6db62e756d 100644
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -36,7 +36,7 @@ struct tcp_congestion_ops;
  * (i.e. things that depend on the address family)
  */
 struct inet_connection_sock_af_ops {
-	int	    (*queue_xmit)(struct sk_buff *skb);
+	int	    (*queue_xmit)(struct sk_buff *skb, struct flowi *fl);
 	void	    (*send_check)(struct sock *sk, struct sk_buff *skb);
 	int	    (*rebuild_header)(struct sock *sk);
 	int	    (*conn_request)(struct sock *sk, struct sk_buff *skb);
@@ -249,7 +249,11 @@ extern int inet_csk_bind_conflict(const struct sock *sk,
 extern int inet_csk_get_port(struct sock *sk, unsigned short snum);
 
 extern struct dst_entry* inet_csk_route_req(struct sock *sk,
+					    struct flowi4 *fl4,
 					    const struct request_sock *req);
+extern struct dst_entry* inet_csk_route_child_sock(struct sock *sk,
+						   struct sock *newsk,
+						   const struct request_sock *req);
 
 static inline void inet_csk_reqsk_queue_add(struct sock *sk,
 					    struct request_sock *req,
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
index 88bdd010d65..2fa8d1341a0 100644
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
@@ -38,9 +38,19 @@ static inline __u8 INET_ECN_encapsulate(__u8 outer, __u8 inner)
 	return outer;
 }
 
-#define	INET_ECN_xmit(sk) do { inet_sk(sk)->tos |= INET_ECN_ECT_0; } while (0)
-#define	INET_ECN_dontxmit(sk) \
-	do { inet_sk(sk)->tos &= ~INET_ECN_MASK; } while (0)
+static inline void INET_ECN_xmit(struct sock *sk)
+{
+	inet_sk(sk)->tos |= INET_ECN_ECT_0;
+	if (inet6_sk(sk) != NULL)
+		inet6_sk(sk)->tclass |= INET_ECN_ECT_0;
+}
+
+static inline void INET_ECN_dontxmit(struct sock *sk)
+{
+	inet_sk(sk)->tos &= ~INET_ECN_MASK;
+	if (inet6_sk(sk) != NULL)
+		inet6_sk(sk)->tclass &= ~INET_ECN_MASK;
+}
 
 #define IP6_ECN_flow_init(label) do {		\
       (label) &= ~htonl(INET_ECN_MASK << 20);	\
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 7a37369f8ea..caaff5f5f39 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -57,7 +57,15 @@ struct ip_options {
 	unsigned char	__data[0];
 };
 
-#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
+struct ip_options_rcu {
+	struct rcu_head rcu;
+	struct ip_options opt;
+};
+
+struct ip_options_data {
+	struct ip_options_rcu	opt;
+	char			data[40];
+};
 
 struct inet_request_sock {
 	struct request_sock	req;
@@ -78,7 +86,7 @@ struct inet_request_sock {
 				acked	   : 1,
 				no_srccheck: 1;
 	kmemcheck_bitfield_end(flags);
-	struct ip_options	*opt;
+	struct ip_options_rcu	*opt;
 };
 
 static inline struct inet_request_sock *inet_rsk(const struct request_sock *sk)
@@ -88,17 +96,21 @@ static inline struct inet_request_sock *inet_rsk(const struct request_sock *sk)
 
 struct inet_cork {
 	unsigned int		flags;
-	unsigned int		fragsize;
+	__be32			addr;
 	struct ip_options	*opt;
+	unsigned int		fragsize;
 	struct dst_entry	*dst;
 	int			length; /* Total length of all frames */
-	__be32			addr;
-	struct flowi		fl;
 	struct page		*page;
 	u32			off;
 	u8			tx_flags;
 };
 
+struct inet_cork_full {
+	struct inet_cork	base;
+	struct flowi		fl;
+};
+
 struct ip_mc_socklist;
 struct ipv6_pinfo;
 struct rtable;
@@ -140,7 +152,7 @@ struct inet_sock {
 	__be16			inet_sport;
 	__u16			inet_id;
 
-	struct ip_options	*opt;
+	struct ip_options_rcu __rcu	*inet_opt;
 	__u8			tos;
 	__u8			min_ttl;
 	__u8			mc_ttl;
@@ -156,7 +168,7 @@ struct inet_sock {
 	int			mc_index;
 	__be32			mc_addr;
 	struct ip_mc_socklist __rcu	*mc_list;
-	struct inet_cork	cork;
+	struct inet_cork_full	cork;
 };
 
 #define IPCORK_OPT	1	/* ip-options has been held in ipcork.opt */
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index e6dd8da6b2a..8a159cc3d68 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -80,7 +80,7 @@ static inline struct inet_peer *inet_getpeer_v4(__be32 v4daddr, int create)
 	return inet_getpeer(&daddr, create);
 }
 
-static inline struct inet_peer *inet_getpeer_v6(struct in6_addr *v6daddr, int create)
+static inline struct inet_peer *inet_getpeer_v6(const struct in6_addr *v6daddr, int create)
 {
 	struct inetpeer_addr daddr;
 
diff --git a/include/net/ip.h b/include/net/ip.h
index 7c416583b71..66dd4914920 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -52,7 +52,7 @@ static inline unsigned int ip_hdrlen(const struct sk_buff *skb)
 struct ipcm_cookie {
 	__be32			addr;
 	int			oif;
-	struct ip_options	*opt;
+	struct ip_options_rcu	*opt;
 	__u8			tx_flags;
 };
 
@@ -92,7 +92,7 @@ extern int		igmp_mc_proc_init(void);
 
 extern int		ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
 					      __be32 saddr, __be32 daddr,
-					      struct ip_options *opt);
+					      struct ip_options_rcu *opt);
 extern int		ip_rcv(struct sk_buff *skb, struct net_device *dev,
 			       struct packet_type *pt, struct net_device *orig_dev);
 extern int		ip_local_deliver(struct sk_buff *skb);
@@ -104,9 +104,9 @@ extern int		ip_do_nat(struct sk_buff *skb);
 extern void		ip_send_check(struct iphdr *ip);
 extern int		__ip_local_out(struct sk_buff *skb);
 extern int		ip_local_out(struct sk_buff *skb);
-extern int		ip_queue_xmit(struct sk_buff *skb);
+extern int		ip_queue_xmit(struct sk_buff *skb, struct flowi *fl);
 extern void		ip_init(void);
-extern int		ip_append_data(struct sock *sk,
+extern int		ip_append_data(struct sock *sk, struct flowi4 *fl4,
 				       int getfrag(void *from, char *to, int offset, int len,
 						   int odd, struct sk_buff *skb),
 				void *from, int len, int protolen,
@@ -114,15 +114,17 @@ extern int		ip_append_data(struct sock *sk,
 				struct rtable **rt,
 				unsigned int flags);
 extern int		ip_generic_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb);
-extern ssize_t		ip_append_page(struct sock *sk, struct page *page,
+extern ssize_t		ip_append_page(struct sock *sk, struct flowi4 *fl4, struct page *page,
 				int offset, size_t size, int flags);
 extern struct sk_buff  *__ip_make_skb(struct sock *sk,
+				      struct flowi4 *fl4,
 				      struct sk_buff_head *queue,
 				      struct inet_cork *cork);
 extern int		ip_send_skb(struct sk_buff *skb);
-extern int		ip_push_pending_frames(struct sock *sk);
+extern int		ip_push_pending_frames(struct sock *sk, struct flowi4 *fl4);
 extern void		ip_flush_pending_frames(struct sock *sk);
 extern struct sk_buff  *ip_make_skb(struct sock *sk,
+				    struct flowi4 *fl4,
 				    int getfrag(void *from, char *to, int offset, int len,
 						int odd, struct sk_buff *skb),
 				    void *from, int length, int transhdrlen,
@@ -130,9 +132,9 @@ extern struct sk_buff  *ip_make_skb(struct sock *sk,
 				    struct rtable **rtp,
 				    unsigned int flags);
 
-static inline struct sk_buff *ip_finish_skb(struct sock *sk)
+static inline struct sk_buff *ip_finish_skb(struct sock *sk, struct flowi4 *fl4)
 {
-	return __ip_make_skb(sk, &sk->sk_write_queue, &inet_sk(sk)->cork);
+	return __ip_make_skb(sk, fl4, &sk->sk_write_queue, &inet_sk(sk)->cork.base);
 }
 
 /* datagram.c */
@@ -172,8 +174,8 @@ static inline __u8 ip_reply_arg_flowi_flags(const struct ip_reply_arg *arg)
 	return (arg->flags & IP_REPLY_ARG_NOSRCCHECK) ? FLOWI_FLAG_ANYSRC : 0;
 }
 
-void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *arg,
-		   unsigned int len); 
+void ip_send_reply(struct sock *sk, struct sk_buff *skb, __be32 daddr,
+		   struct ip_reply_arg *arg, unsigned int len);
 
 struct ipv4_config {
 	int	log_martians;
@@ -416,14 +418,15 @@ extern int ip_forward(struct sk_buff *skb);
  *	Functions provided by ip_options.c
  */
  
-extern void ip_options_build(struct sk_buff *skb, struct ip_options *opt, __be32 daddr, struct rtable *rt, int is_frag);
+extern void ip_options_build(struct sk_buff *skb, struct ip_options *opt,
+			     __be32 daddr, struct rtable *rt, int is_frag);
 extern int ip_options_echo(struct ip_options *dopt, struct sk_buff *skb);
 extern void ip_options_fragment(struct sk_buff *skb);
 extern int ip_options_compile(struct net *net,
 			      struct ip_options *opt, struct sk_buff *skb);
-extern int ip_options_get(struct net *net, struct ip_options **optp,
+extern int ip_options_get(struct net *net, struct ip_options_rcu **optp,
 			  unsigned char *data, int optlen);
-extern int ip_options_get_from_user(struct net *net, struct ip_options **optp,
+extern int ip_options_get_from_user(struct net *net, struct ip_options_rcu **optp,
 				    unsigned char __user *data, int optlen);
 extern void ip_options_undo(struct ip_options * opt);
 extern void ip_forward_options(struct sk_buff *skb);
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index bc3cde0a810..477ef75f387 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -13,8 +13,6 @@
 #ifndef _IP6_FIB_H
 #define _IP6_FIB_H
 
-#ifdef __KERNEL__
-
 #include <linux/ipv6_route.h>
 #include <linux/rtnetlink.h>
 #include <linux/spinlock.h>
@@ -42,6 +40,7 @@ struct fib6_config {
 
 	struct in6_addr	fc_dst;
 	struct in6_addr	fc_src;
+	struct in6_addr	fc_prefsrc;
 	struct in6_addr	fc_gateway;
 
 	unsigned long	fc_expires;
@@ -107,6 +106,7 @@ struct rt6_info {
 	struct rt6key			rt6i_dst ____cacheline_aligned_in_smp;
 	u32				rt6i_flags;
 	struct rt6key			rt6i_src;
+	struct rt6key			rt6i_prefsrc;
 	u32				rt6i_metric;
 	u32				rt6i_peer_genid;
 
@@ -196,12 +196,12 @@ extern struct dst_entry         *fib6_rule_lookup(struct net *net,
 						  pol_lookup_t lookup);
 
 extern struct fib6_node		*fib6_lookup(struct fib6_node *root,
-					     struct in6_addr *daddr,
-					     struct in6_addr *saddr);
+					     const struct in6_addr *daddr,
+					     const struct in6_addr *saddr);
 
 struct fib6_node		*fib6_locate(struct fib6_node *root,
-					     struct in6_addr *daddr, int dst_len,
-					     struct in6_addr *saddr, int src_len);
+					     const struct in6_addr *daddr, int dst_len,
+					     const struct in6_addr *saddr, int src_len);
 
 extern void			fib6_clean_all(struct net *net,
 					       int (*func)(struct rt6_info *, void *arg),
@@ -238,4 +238,3 @@ static inline void              fib6_rules_cleanup(void)
 }
 #endif
 #endif
-#endif
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index c850e5fb967..5e91b72fc71 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -21,8 +21,6 @@ struct route_info {
 	__u8			prefix[0];	/* 0,8 or 16 */
 };
 
-#ifdef __KERNEL__
-
 #include <net/flow.h>
 #include <net/ip6_fib.h>
 #include <net/sock.h>
@@ -84,6 +82,12 @@ extern int			ip6_route_add(struct fib6_config *cfg);
 extern int			ip6_ins_rt(struct rt6_info *);
 extern int			ip6_del_rt(struct rt6_info *);
 
+extern int			ip6_route_get_saddr(struct net *net,
+						    struct rt6_info *rt,
+						    const struct in6_addr *daddr,
+						    unsigned int prefs,
+						    struct in6_addr *saddr);
+
 extern struct rt6_info		*rt6_lookup(struct net *net,
 					    const struct in6_addr *daddr,
 					    const struct in6_addr *saddr,
@@ -106,9 +110,9 @@ extern int			ip6_dst_hoplimit(struct dst_entry *dst);
  *	support functions for ND
  *
  */
-extern struct rt6_info *	rt6_get_dflt_router(struct in6_addr *addr,
+extern struct rt6_info *	rt6_get_dflt_router(const struct in6_addr *addr,
 						    struct net_device *dev);
-extern struct rt6_info *	rt6_add_dflt_router(struct in6_addr *gwaddr,
+extern struct rt6_info *	rt6_add_dflt_router(const struct in6_addr *gwaddr,
 						    struct net_device *dev,
 						    unsigned int pref);
 
@@ -116,17 +120,17 @@ extern void			rt6_purge_dflt_routers(struct net *net);
 
 extern int			rt6_route_rcv(struct net_device *dev,
 					      u8 *opt, int len,
-					      struct in6_addr *gwaddr);
+					      const struct in6_addr *gwaddr);
 
-extern void			rt6_redirect(struct in6_addr *dest,
-					     struct in6_addr *src,
-					     struct in6_addr *saddr,
+extern void			rt6_redirect(const struct in6_addr *dest,
+					     const struct in6_addr *src,
+					     const struct in6_addr *saddr,
 					     struct neighbour *neigh,
 					     u8 *lladdr,
 					     int on_link);
 
-extern void			rt6_pmtu_discovery(struct in6_addr *daddr,
-						   struct in6_addr *saddr,
+extern void			rt6_pmtu_discovery(const struct in6_addr *daddr,
+						   const struct in6_addr *saddr,
 						   struct net_device *dev,
 						   u32 pmtu);
 
@@ -141,6 +145,7 @@ struct rt6_rtnl_dump_arg {
 extern int rt6_dump_route(struct rt6_info *rt, void *p_arg);
 extern void rt6_ifdown(struct net *net, struct net_device *dev);
 extern void rt6_mtu_change(struct net_device *dev, unsigned mtu);
+extern void rt6_remove_prefsrc(struct inet6_ifaddr *ifp);
 
 
 /*
@@ -186,4 +191,3 @@ static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
 }
 
 #endif
-#endif
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index e5d66ec88cf..10422ef14e2 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -160,7 +160,8 @@ struct fib_table {
 	struct hlist_node tb_hlist;
 	u32		tb_id;
 	int		tb_default;
-	unsigned char	tb_data[0];
+	int		tb_num_default;
+	unsigned long	tb_data[0];
 };
 
 extern int fib_table_lookup(struct fib_table *tb, const struct flowi4 *flp,
@@ -227,9 +228,9 @@ extern struct fib_table *fib_get_table(struct net *net, u32 id);
 /* Exported by fib_frontend.c */
 extern const struct nla_policy rtm_ipv4_policy[];
 extern void		ip_fib_init(void);
-extern int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
-			       struct net_device *dev, __be32 *spec_dst,
-			       u32 *itag, u32 mark);
+extern int fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst,
+			       u8 tos, int oif, struct net_device *dev,
+			       __be32 *spec_dst, u32 *itag);
 extern void fib_select_default(struct fib_result *res);
 
 /* Exported by fib_semantics.c */
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 30b49ed72f0..4fff432aead 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -8,9 +8,6 @@
 
 #include <linux/ip_vs.h>                /* definitions shared with userland */
 
-/* old ipvsadm versions still include this file directly */
-#ifdef __KERNEL__
-
 #include <asm/types.h>                  /* for __uXX types */
 
 #include <linux/sysctl.h>               /* for ctl_path */
@@ -52,7 +49,7 @@ static inline struct net *skb_net(const struct sk_buff *skb)
 	 */
 	if (likely(skb->dev && skb->dev->nd_net))
 		return dev_net(skb->dev);
-	if (skb_dst(skb)->dev)
+	if (skb_dst(skb) && skb_dst(skb)->dev)
 		return dev_net(skb_dst(skb)->dev);
 	WARN(skb->sk, "Maybe skb_sknet should be used in %s() at line:%d\n",
 		      __func__, __LINE__);
@@ -92,7 +89,7 @@ static inline struct net *skb_sknet(const struct sk_buff *skb)
 }
 /*
  * This one needed for single_open_net since net is stored directly in
- * private not as a struct i.e. seq_file_net cant be used.
+ * private not as a struct i.e. seq_file_net can't be used.
  */
 static inline struct net *seq_file_single_net(struct seq_file *seq)
 {
@@ -668,9 +665,7 @@ struct ip_vs_dest {
 	struct dst_entry	*dst_cache;	/* destination cache entry */
 	u32			dst_rtos;	/* RT_TOS(tos) for dst */
 	u32			dst_cookie;
-#ifdef CONFIG_IP_VS_IPV6
-	struct in6_addr		dst_saddr;
-#endif
+	union nf_inet_addr	dst_saddr;
 
 	/* for virtual service */
 	struct ip_vs_service	*svc;		/* service it belongs to */
@@ -791,6 +786,7 @@ struct ip_vs_app {
 /* IPVS in network namespace */
 struct netns_ipvs {
 	int			gen;		/* Generation */
+	int			enable;		/* enable like nf_hooks do */
 	/*
 	 *	Hash table: for real service lookups
 	 */
@@ -1089,6 +1085,22 @@ ip_vs_control_add(struct ip_vs_conn *cp, struct ip_vs_conn *ctl_cp)
 	atomic_inc(&ctl_cp->n_control);
 }
 
+/*
+ * IPVS netns init & cleanup functions
+ */
+extern int __ip_vs_estimator_init(struct net *net);
+extern int __ip_vs_control_init(struct net *net);
+extern int __ip_vs_protocol_init(struct net *net);
+extern int __ip_vs_app_init(struct net *net);
+extern int __ip_vs_conn_init(struct net *net);
+extern int __ip_vs_sync_init(struct net *net);
+extern void __ip_vs_conn_cleanup(struct net *net);
+extern void __ip_vs_app_cleanup(struct net *net);
+extern void __ip_vs_protocol_cleanup(struct net *net);
+extern void __ip_vs_control_cleanup(struct net *net);
+extern void __ip_vs_estimator_cleanup(struct net *net);
+extern void __ip_vs_sync_cleanup(struct net *net);
+extern void __ip_vs_service_cleanup(struct net *net);
 
 /*
  *      IPVS application functions
@@ -1239,7 +1251,8 @@ extern int ip_vs_tunnel_xmit
 extern int ip_vs_dr_xmit
 (struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
 extern int ip_vs_icmp_xmit
-(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp, int offset);
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp,
+ int offset, unsigned int hooknum);
 extern void ip_vs_dst_reset(struct ip_vs_dest *dest);
 
 #ifdef CONFIG_IP_VS_IPV6
@@ -1253,7 +1266,7 @@ extern int ip_vs_dr_xmit_v6
 (struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
 extern int ip_vs_icmp_xmit_v6
 (struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp,
- int offset);
+ int offset, unsigned int hooknum);
 #endif
 
 #ifdef CONFIG_SYSCTL
@@ -1415,6 +1428,4 @@ ip_vs_dest_conn_overhead(struct ip_vs_dest *dest)
 		atomic_read(&dest->inactconns);
 }
 
-#endif /* __KERNEL__ */
-
 #endif	/* _NET_IP_VS_H */
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 34200f9e680..c033ed00df7 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -77,11 +77,9 @@
 /*
  *	Addr scopes
  */
-#ifdef __KERNEL__
 #define IPV6_ADDR_MC_SCOPE(a)	\
 	((a)->s6_addr[1] & 0x0f)	/* nonstandard */
 #define __IPV6_ADDR_SCOPE_INVALID	-1
-#endif
 #define IPV6_ADDR_SCOPE_NODELOCAL	0x01
 #define IPV6_ADDR_SCOPE_LINKLOCAL	0x02
 #define IPV6_ADDR_SCOPE_SITELOCAL	0x05
@@ -91,14 +89,12 @@
 /*
  *	Addr flags
  */
-#ifdef __KERNEL__
 #define IPV6_ADDR_MC_FLAG_TRANSIENT(a)	\
 	((a)->s6_addr[1] & 0x10)
 #define IPV6_ADDR_MC_FLAG_PREFIX(a)	\
 	((a)->s6_addr[1] & 0x20)
 #define IPV6_ADDR_MC_FLAG_RENDEZVOUS(a)	\
 	((a)->s6_addr[1] & 0x40)
-#endif
 
 /*
  *	fragmentation header
@@ -113,8 +109,6 @@ struct frag_hdr {
 
 #define	IP6_MF	0x0001
 
-#ifdef __KERNEL__
-
 #include <net/sock.h>
 
 /* sysctls */
@@ -129,6 +123,15 @@ extern struct ctl_path net_ipv6_ctl_path[];
 	SNMP_INC_STATS##modifier((net)->mib.statname##_statistics, (field));\
 })
 
+/* per device counters are atomic_long_t */
+#define _DEVINCATOMIC(net, statname, modifier, idev, field)		\
+({									\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_INC_STATS_ATOMIC_LONG((_idev)->stats.statname##dev, (field)); \
+	SNMP_INC_STATS##modifier((net)->mib.statname##_statistics, (field));\
+})
+
 #define _DEVADD(net, statname, modifier, idev, field, val)		\
 ({									\
 	struct inet6_dev *_idev = (idev);				\
@@ -160,16 +163,16 @@ extern struct ctl_path net_ipv6_ctl_path[];
 #define IP6_UPD_PO_STATS_BH(net, idev,field,val)   \
 		_DEVUPD(net, ipv6, 64_BH, idev, field, val)
 #define ICMP6_INC_STATS(net, idev, field)	\
-		_DEVINC(net, icmpv6, , idev, field)
+		_DEVINCATOMIC(net, icmpv6, , idev, field)
 #define ICMP6_INC_STATS_BH(net, idev, field)	\
-		_DEVINC(net, icmpv6, _BH, idev, field)
+		_DEVINCATOMIC(net, icmpv6, _BH, idev, field)
 
 #define ICMP6MSGOUT_INC_STATS(net, idev, field)		\
-	_DEVINC(net, icmpv6msg, , idev, field +256)
+	_DEVINCATOMIC(net, icmpv6msg, , idev, field +256)
 #define ICMP6MSGOUT_INC_STATS_BH(net, idev, field)	\
-	_DEVINC(net, icmpv6msg, _BH, idev, field +256)
+	_DEVINCATOMIC(net, icmpv6msg, _BH, idev, field +256)
 #define ICMP6MSGIN_INC_STATS_BH(net, idev, field)	\
-	_DEVINC(net, icmpv6msg, _BH, idev, field)
+	_DEVINCATOMIC(net, icmpv6msg, _BH, idev, field)
 
 struct ip6_ra_chain {
 	struct ip6_ra_chain	*next;
@@ -376,8 +379,8 @@ enum ip6_defrag_users {
 struct ip6_create_arg {
 	__be32 id;
 	u32 user;
-	struct in6_addr *src;
-	struct in6_addr *dst;
+	const struct in6_addr *src;
+	const struct in6_addr *dst;
 };
 
 void ip6_frag_init(struct inet_frag_queue *q, void *a);
@@ -667,5 +670,4 @@ extern int ipv6_static_sysctl_register(void);
 extern void ipv6_static_sysctl_unregister(void);
 #endif
 
-#endif /* __KERNEL__ */
 #endif /* _NET_IPV6_H */
diff --git a/include/net/ipx.h b/include/net/ipx.h
index 05d7e4a88b4..c1fec6b464c 100644
--- a/include/net/ipx.h
+++ b/include/net/ipx.h
@@ -80,7 +80,6 @@ struct ipx_route {
 	atomic_t		refcnt;
 };
 
-#ifdef __KERNEL__
 struct ipx_cb {
 	u8	ipx_tctrl;
 	__be32	ipx_dest_net;
@@ -116,7 +115,6 @@ static inline struct ipx_sock *ipx_sk(struct sock *sk)
 }
 
 #define IPX_SKB_CB(__skb) ((struct ipx_cb *)&((__skb)->cb[0]))
-#endif
 
 #define IPX_MIN_EPHEMERAL_SOCKET	0x4000
 #define IPX_MAX_EPHEMERAL_SOCKET	0x7fff
diff --git a/include/net/irda/irlap.h b/include/net/irda/irlap.h
index 17fcd964f9d..fb4b76d5d7f 100644
--- a/include/net/irda/irlap.h
+++ b/include/net/irda/irlap.h
@@ -204,7 +204,7 @@ struct irlap_cb {
 
 	notify_t notify; /* Callbacks to IrLMP */
 
-	int    mtt_required;  /* Minumum turnaround time required */
+	int    mtt_required;  /* Minimum turnaround time required */
 	int    xbofs_delay;   /* Nr of XBOF's used to MTT */
 	int    bofs_count;    /* Negotiated extra BOFs */
 	int    next_bofs;     /* Negotiated extra BOFs after next frame */
diff --git a/include/net/irda/wrapper.h b/include/net/irda/wrapper.h
index 2942ad6ab93..eef53ebe3d7 100644
--- a/include/net/irda/wrapper.h
+++ b/include/net/irda/wrapper.h
@@ -42,7 +42,7 @@
 
 #define IRDA_TRANS 0x20    /* Asynchronous transparency modifier */       
 
-/* States for receving a frame in async mode */
+/* States for receiving a frame in async mode */
 enum {
 	OUTSIDE_FRAME, 
 	BEGIN_FRAME, 
diff --git a/include/net/iucv/iucv.h b/include/net/iucv/iucv.h
index 205a3360156..1121baa9f69 100644
--- a/include/net/iucv/iucv.h
+++ b/include/net/iucv/iucv.h
@@ -173,7 +173,7 @@ struct iucv_handler {
 	/*
 	 * The message_pending function is called after an icuv interrupt
 	 * type 0x06 or type 0x07 has been received. A new message is
-	 * availabe and can be received with iucv_message_receive.
+	 * available and can be received with iucv_message_receive.
 	 */
 	void (*message_pending)(struct iucv_path *, struct iucv_message *);
 	/*
diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
index 3afdb21cc31..5d5a6a4732e 100644
--- a/include/net/iw_handler.h
+++ b/include/net/iw_handler.h
@@ -91,7 +91,7 @@
  * --------------------
  * The implementation goals were as follow :
  *	o Obvious : you should not need a PhD to understand what's happening,
- *		the benefit is easier maintainance.
+ *		the benefit is easier maintenance.
  *	o Flexible : it should accommodate a wide variety of driver
  *		implementations and be as flexible as the old API.
  *	o Lean : it should be efficient memory wise to minimise the impact
@@ -129,7 +129,7 @@
  *
  * Functions prototype uses union iwreq_data
  * -----------------------------------------
- * Some would have prefered functions defined this way :
+ * Some would have preferred functions defined this way :
  *	static int mydriver_ioctl_setrate(struct net_device *dev, 
  *					  long rate, int auto)
  * 1) The kernel code doesn't "validate" the content of iwreq_data, and
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
index 75b8e2968c9..f57e7d46a45 100644
--- a/include/net/llc_pdu.h
+++ b/include/net/llc_pdu.h
@@ -199,7 +199,7 @@ struct llc_pdu_sn {
 	u8 ssap;
 	u8 ctrl_1;
 	u8 ctrl_2;
-};
+} __packed;
 
 static inline struct llc_pdu_sn *llc_pdu_sn_hdr(struct sk_buff *skb)
 {
@@ -211,7 +211,7 @@ struct llc_pdu_un {
 	u8 dsap;
 	u8 ssap;
 	u8 ctrl_1;
-};
+} __packed;
 
 static inline struct llc_pdu_un *llc_pdu_un_hdr(struct sk_buff *skb)
 {
@@ -359,7 +359,7 @@ struct llc_xid_info {
 	u8 fmt_id;	/* always 0x81 for LLC */
 	u8 type;	/* different if NULL/non-NULL LSAP */
 	u8 rw;		/* sender receive window */
-};
+} __packed;
 
 /**
  *	llc_pdu_init_as_xid_cmd - sets bytes 3, 4 & 5 of LLC header as XID
@@ -415,7 +415,7 @@ struct llc_frmr_info {
 	u8  curr_ssv;		/* current send state variable val */
 	u8  curr_rsv;		/* current receive state variable */
 	u8  ind_bits;		/* indicator bits set with macro */
-};
+} __packed;
 
 extern void llc_pdu_set_cmd_rsp(struct sk_buff *skb, u8 type);
 extern void llc_pdu_set_pf_bit(struct sk_buff *skb, u8 bit_value);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 03067fba84a..e6d6a66a8f7 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1309,7 +1309,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * acceleration (i.e. iwlwifi). Those drivers should provide update_tkip_key
  * handler.
  * The update_tkip_key() call updates the driver with the new phase 1 key.
- * This happens everytime the iv16 wraps around (every 65536 packets). The
+ * This happens every time the iv16 wraps around (every 65536 packets). The
  * set_key() call will happen only once for each key (unless the AP did
  * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is
  * provided by update_tkip_key only. The trigger that makes mac80211 call this
diff --git a/include/net/ndisc.h b/include/net/ndisc.h
index e0e594f8e9d..62beeb97c4b 100644
--- a/include/net/ndisc.h
+++ b/include/net/ndisc.h
@@ -42,8 +42,6 @@ enum {
 #define ND_REACHABLE_TIME		(30*HZ)
 #define ND_RETRANS_TIMER		HZ
 
-#ifdef __KERNEL__
-
 #include <linux/compiler.h>
 #include <linux/icmpv6.h>
 #include <linux/in6.h>
@@ -102,7 +100,8 @@ extern void			ndisc_send_redirect(struct sk_buff *skb,
 						    struct neighbour *neigh,
 						    const struct in6_addr *target);
 
-extern int			ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int dir);
+extern int			ndisc_mc_map(const struct in6_addr *addr, char *buf,
+					     struct net_device *dev, int dir);
 
 extern struct sk_buff		*ndisc_build_skb(struct net_device *dev,
 						 const struct in6_addr *daddr,
@@ -155,8 +154,4 @@ static inline struct neighbour * ndisc_get_neigh(struct net_device *dev, const s
 	return ERR_PTR(-ENODEV);
 }
 
-
-#endif /* __KERNEL__ */
-
-
 #endif
diff --git a/include/net/netevent.h b/include/net/netevent.h
index 22b239c17ea..086f8a5b59d 100644
--- a/include/net/netevent.h
+++ b/include/net/netevent.h
@@ -10,7 +10,6 @@
  *
  * 	Changes:
  */
-#ifdef __KERNEL__
 
 struct dst_entry;
 
@@ -29,4 +28,3 @@ extern int unregister_netevent_notifier(struct notifier_block *nb);
 extern int call_netevent_notifiers(unsigned long val, void *v);
 
 #endif
-#endif
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index d0d13378991..c7c42e7acc3 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -14,7 +14,6 @@
 
 #include <linux/netfilter/nf_conntrack_common.h>
 
-#ifdef __KERNEL__
 #include <linux/bitops.h>
 #include <linux/compiler.h>
 #include <asm/atomic.h>
@@ -326,5 +325,4 @@ do {							\
 #define MODULE_ALIAS_NFCT_HELPER(helper) \
         MODULE_ALIAS("nfct-helper-" helper)
 
-#endif /* __KERNEL__ */
 #endif /* _NF_CONNTRACK_H */
diff --git a/include/net/netfilter/nf_conntrack_tuple.h b/include/net/netfilter/nf_conntrack_tuple.h
index 4ee44c84a30..7ca6bdd5bae 100644
--- a/include/net/netfilter/nf_conntrack_tuple.h
+++ b/include/net/netfilter/nf_conntrack_tuple.h
@@ -104,8 +104,6 @@ struct nf_conntrack_tuple_mask {
 	} src;
 };
 
-#ifdef __KERNEL__
-
 static inline void nf_ct_dump_tuple_ip(const struct nf_conntrack_tuple *t)
 {
 #ifdef DEBUG
@@ -148,8 +146,6 @@ struct nf_conntrack_tuple_hash {
 	struct nf_conntrack_tuple tuple;
 };
 
-#endif /* __KERNEL__ */
-
 static inline bool __nf_ct_tuple_src_equal(const struct nf_conntrack_tuple *t1,
 					   const struct nf_conntrack_tuple *t2)
 { 
diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h
index aff80b190c1..0346b007086 100644
--- a/include/net/netfilter/nf_nat.h
+++ b/include/net/netfilter/nf_nat.h
@@ -48,7 +48,6 @@ struct nf_nat_multi_range_compat {
 	struct nf_nat_range range[1];
 };
 
-#ifdef __KERNEL__
 #include <linux/list.h>
 #include <linux/netfilter/nf_conntrack_pptp.h>
 #include <net/netfilter/nf_conntrack_extend.h>
@@ -93,7 +92,4 @@ static inline struct nf_conn_nat *nfct_nat(const struct nf_conn *ct)
 #endif
 }
 
-#else  /* !__KERNEL__: iptables wants this to compile. */
-#define nf_nat_multi_range nf_nat_multi_range_compat
-#endif /*__KERNEL__*/
 #endif
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
index 542195d9469..d786b4fc02a 100644
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -54,6 +54,8 @@ struct netns_ipv4 {
 	int sysctl_rt_cache_rebuild_count;
 	int current_rt_cache_rebuild_count;
 
+	unsigned int sysctl_ping_group_range[2];
+
 	atomic_t rt_genid;
 	atomic_t dev_addr_genid;
 
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 13649eb5741..8639de5750f 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -51,7 +51,7 @@ void phonet_address_notify(int event, struct net_device *dev, u8 addr);
 int phonet_route_add(struct net_device *dev, u8 daddr);
 int phonet_route_del(struct net_device *dev, u8 daddr);
 void rtm_phonet_notify(int event, struct net_device *dev, u8 dst);
-struct net_device *phonet_route_get(struct net *net, u8 daddr);
+struct net_device *phonet_route_get_rcu(struct net *net, u8 daddr);
 struct net_device *phonet_route_output(struct net *net, u8 daddr);
 
 #define PN_NO_ADDR	0xff
diff --git a/include/net/ping.h b/include/net/ping.h
new file mode 100644
index 00000000000..682b5ae9af5
--- /dev/null
+++ b/include/net/ping.h
@@ -0,0 +1,55 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the "ping" module.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _PING_H
+#define _PING_H
+
+#include <net/netns/hash.h>
+
+/* PING_HTABLE_SIZE must be power of 2 */
+#define PING_HTABLE_SIZE 	64
+#define PING_HTABLE_MASK 	(PING_HTABLE_SIZE-1)
+
+#define ping_portaddr_for_each_entry(__sk, node, list) \
+	hlist_nulls_for_each_entry(__sk, node, list, sk_nulls_node)
+
+/*
+ * gid_t is either uint or ushort.  We want to pass it to
+ * proc_dointvec_minmax(), so it must not be larger than MAX_INT
+ */
+#define GID_T_MAX (((gid_t)~0U) >> 1)
+
+struct ping_table {
+	struct hlist_nulls_head	hash[PING_HTABLE_SIZE];
+	rwlock_t		lock;
+};
+
+struct ping_iter_state {
+	struct seq_net_private  p;
+	int			bucket;
+};
+
+extern struct proto ping_prot;
+
+
+extern void ping_rcv(struct sk_buff *);
+extern void ping_err(struct sk_buff *, u32 info);
+
+#ifdef CONFIG_PROC_FS
+extern int __init ping_proc_init(void);
+extern void ping_proc_exit(void);
+#endif
+
+void __init ping_init(void);
+
+
+#endif /* _PING_H */
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index d9549af6929..65afc496620 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -32,7 +32,7 @@ static inline void *qdisc_priv(struct Qdisc *q)
    
    The result: [34]86 is not good choice for QoS router :-(
 
-   The things are not so bad, because we may use artifical
+   The things are not so bad, because we may use artificial
    clock evaluated by integration of network data flow
    in the most critical places.
  */
diff --git a/include/net/rawv6.h b/include/net/rawv6.h
index f6b9b830df8..cf757723445 100644
--- a/include/net/rawv6.h
+++ b/include/net/rawv6.h
@@ -1,8 +1,6 @@
 #ifndef _NET_RAWV6_H
 #define _NET_RAWV6_H
 
-#ifdef __KERNEL__
-
 #include <net/protocol.h>
 
 void raw6_icmp_error(struct sk_buff *, int nexthdr,
@@ -20,5 +18,3 @@ int rawv6_mh_filter_unregister(int (*filter)(struct sock *sock,
 #endif
 
 #endif
-
-#endif
diff --git a/include/net/route.h b/include/net/route.h
index f88429cad52..db7b3432f07 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -35,16 +35,8 @@
 #include <linux/cache.h>
 #include <linux/security.h>
 
-#ifndef __KERNEL__
-#warning This file is not supposed to be used outside of kernel.
-#endif
-
 #define RTO_ONLINK	0x01
 
-#define RTO_CONN	0
-/* RTO_CONN is not used (being alias for 0), but preserved not to break
- * some modules referring to it. */
-
 #define RT_CONN_FLAGS(sk)   (RT_TOS(inet_sk(sk)->tos) | sock_flag(sk, SOCK_LOCALROUTE))
 
 struct fib_nh;
@@ -60,10 +52,11 @@ struct rtable {
 	int			rt_genid;
 	unsigned		rt_flags;
 	__u16			rt_type;
-	__u8			rt_tos;
+	__u8			rt_key_tos;
 
 	__be32			rt_dst;	/* Path destination	*/
 	__be32			rt_src;	/* Path source		*/
+	int			rt_route_iif;
 	int			rt_iif;
 	int			rt_oif;
 	__u32			rt_mark;
@@ -80,12 +73,12 @@ struct rtable {
 
 static inline bool rt_is_input_route(struct rtable *rt)
 {
-	return rt->rt_iif != 0;
+	return rt->rt_route_iif != 0;
 }
 
 static inline bool rt_is_output_route(struct rtable *rt)
 {
-	return rt->rt_iif == 0;
+	return rt->rt_route_iif == 0;
 }
 
 struct ip_rt_acct {
@@ -122,7 +115,7 @@ extern void		ip_rt_redirect(__be32 old_gw, __be32 dst, __be32 new_gw,
 				       __be32 src, struct net_device *dev);
 extern void		rt_cache_flush(struct net *net, int how);
 extern void		rt_cache_flush_batch(struct net *net);
-extern struct rtable *__ip_route_output_key(struct net *, const struct flowi4 *flp);
+extern struct rtable *__ip_route_output_key(struct net *, struct flowi4 *flp);
 extern struct rtable *ip_route_output_flow(struct net *, struct flowi4 *flp,
 					   struct sock *sk);
 extern struct dst_entry *ipv4_blackhole_route(struct net *net, struct dst_entry *dst_orig);
@@ -144,40 +137,33 @@ static inline struct rtable *ip_route_output(struct net *net, __be32 daddr,
 	return ip_route_output_key(net, &fl4);
 }
 
-static inline struct rtable *ip_route_output_ports(struct net *net, struct sock *sk,
+static inline struct rtable *ip_route_output_ports(struct net *net, struct flowi4 *fl4,
+						   struct sock *sk,
 						   __be32 daddr, __be32 saddr,
 						   __be16 dport, __be16 sport,
 						   __u8 proto, __u8 tos, int oif)
 {
-	struct flowi4 fl4 = {
-		.flowi4_oif = oif,
-		.flowi4_flags = sk ? inet_sk_flowi_flags(sk) : 0,
-		.flowi4_mark = sk ? sk->sk_mark : 0,
-		.daddr = daddr,
-		.saddr = saddr,
-		.flowi4_tos = tos,
-		.flowi4_proto = proto,
-		.fl4_dport = dport,
-		.fl4_sport = sport,
-	};
+	flowi4_init_output(fl4, oif, sk ? sk->sk_mark : 0, tos,
+			   RT_SCOPE_UNIVERSE, proto,
+			   sk ? inet_sk_flowi_flags(sk) : 0,
+			   daddr, saddr, dport, sport);
 	if (sk)
-		security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
-	return ip_route_output_flow(net, &fl4, sk);
+		security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+	return ip_route_output_flow(net, fl4, sk);
 }
 
-static inline struct rtable *ip_route_output_gre(struct net *net,
+static inline struct rtable *ip_route_output_gre(struct net *net, struct flowi4 *fl4,
 						 __be32 daddr, __be32 saddr,
 						 __be32 gre_key, __u8 tos, int oif)
 {
-	struct flowi4 fl4 = {
-		.flowi4_oif = oif,
-		.daddr = daddr,
-		.saddr = saddr,
-		.flowi4_tos = tos,
-		.flowi4_proto = IPPROTO_GRE,
-		.fl4_gre_key = gre_key,
-	};
-	return ip_route_output_key(net, &fl4);
+	memset(fl4, 0, sizeof(*fl4));
+	fl4->flowi4_oif = oif;
+	fl4->daddr = daddr;
+	fl4->saddr = saddr;
+	fl4->flowi4_tos = tos;
+	fl4->flowi4_proto = IPPROTO_GRE;
+	fl4->fl4_gre_key = gre_key;
+	return ip_route_output_key(net, fl4);
 }
 
 extern int ip_route_input_common(struct sk_buff *skb, __be32 dst, __be32 src,
@@ -195,14 +181,15 @@ static inline int ip_route_input_noref(struct sk_buff *skb, __be32 dst, __be32 s
 	return ip_route_input_common(skb, dst, src, tos, devin, true);
 }
 
-extern unsigned short	ip_rt_frag_needed(struct net *net, struct iphdr *iph, unsigned short new_mtu, struct net_device *dev);
+extern unsigned short	ip_rt_frag_needed(struct net *net, const struct iphdr *iph,
+					  unsigned short new_mtu, struct net_device *dev);
 extern void		ip_rt_send_redirect(struct sk_buff *skb);
 
 extern unsigned		inet_addr_type(struct net *net, __be32 addr);
 extern unsigned		inet_dev_addr_type(struct net *net, const struct net_device *dev, __be32 addr);
 extern void		ip_rt_multicast_event(struct in_device *);
 extern int		ip_rt_ioctl(struct net *, unsigned int cmd, void __user *arg);
-extern void		ip_rt_get_source(u8 *src, struct rtable *rt);
+extern void		ip_rt_get_source(u8 *src, struct sk_buff *skb, struct rtable *rt);
 extern int		ip_rt_dump(struct sk_buff *skb,  struct netlink_callback *cb);
 
 struct in_ifaddr;
@@ -224,78 +211,93 @@ static inline char rt_tos2priority(u8 tos)
 	return ip_tos2prio[IPTOS_TOS(tos)>>1];
 }
 
-static inline struct rtable *ip_route_connect(__be32 dst, __be32 src, u32 tos,
+/* ip_route_connect() and ip_route_newports() work in tandem whilst
+ * binding a socket for a new outgoing connection.
+ *
+ * In order to use IPSEC properly, we must, in the end, have a
+ * route that was looked up using all available keys including source
+ * and destination ports.
+ *
+ * However, if a source port needs to be allocated (the user specified
+ * a wildcard source port) we need to obtain addressing information
+ * in order to perform that allocation.
+ *
+ * So ip_route_connect() looks up a route using wildcarded source and
+ * destination ports in the key, simply so that we can get a pair of
+ * addresses to use for port allocation.
+ *
+ * Later, once the ports are allocated, ip_route_newports() will make
+ * another route lookup if needed to make sure we catch any IPSEC
+ * rules keyed on the port information.
+ *
+ * The callers allocate the flow key on their stack, and must pass in
+ * the same flowi4 object to both the ip_route_connect() and the
+ * ip_route_newports() calls.
+ */
+
+static inline void ip_route_connect_init(struct flowi4 *fl4, __be32 dst, __be32 src,
+					 u32 tos, int oif, u8 protocol,
+					 __be16 sport, __be16 dport,
+					 struct sock *sk, bool can_sleep)
+{
+	__u8 flow_flags = 0;
+
+	if (inet_sk(sk)->transparent)
+		flow_flags |= FLOWI_FLAG_ANYSRC;
+	if (protocol == IPPROTO_TCP)
+		flow_flags |= FLOWI_FLAG_PRECOW_METRICS;
+	if (can_sleep)
+		flow_flags |= FLOWI_FLAG_CAN_SLEEP;
+
+	flowi4_init_output(fl4, oif, sk->sk_mark, tos, RT_SCOPE_UNIVERSE,
+			   protocol, flow_flags, dst, src, dport, sport);
+}
+
+static inline struct rtable *ip_route_connect(struct flowi4 *fl4,
+					      __be32 dst, __be32 src, u32 tos,
 					      int oif, u8 protocol,
 					      __be16 sport, __be16 dport,
 					      struct sock *sk, bool can_sleep)
 {
-	struct flowi4 fl4 = {
-		.flowi4_oif = oif,
-		.flowi4_mark = sk->sk_mark,
-		.daddr = dst,
-		.saddr = src,
-		.flowi4_tos = tos,
-		.flowi4_proto = protocol,
-		.fl4_sport = sport,
-		.fl4_dport = dport,
-	};
 	struct net *net = sock_net(sk);
 	struct rtable *rt;
 
-	if (inet_sk(sk)->transparent)
-		fl4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
-	if (protocol == IPPROTO_TCP)
-		fl4.flowi4_flags |= FLOWI_FLAG_PRECOW_METRICS;
-	if (can_sleep)
-		fl4.flowi4_flags |= FLOWI_FLAG_CAN_SLEEP;
+	ip_route_connect_init(fl4, dst, src, tos, oif, protocol,
+			      sport, dport, sk, can_sleep);
 
 	if (!dst || !src) {
-		rt = __ip_route_output_key(net, &fl4);
+		rt = __ip_route_output_key(net, fl4);
 		if (IS_ERR(rt))
 			return rt;
-		fl4.daddr = rt->rt_dst;
-		fl4.saddr = rt->rt_src;
 		ip_rt_put(rt);
 	}
-	security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
-	return ip_route_output_flow(net, &fl4, sk);
+	security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+	return ip_route_output_flow(net, fl4, sk);
 }
 
-static inline struct rtable *ip_route_newports(struct rtable *rt,
-					       u8 protocol, __be16 orig_sport,
-					       __be16 orig_dport, __be16 sport,
-					       __be16 dport, struct sock *sk)
+static inline struct rtable *ip_route_newports(struct flowi4 *fl4, struct rtable *rt,
+					       __be16 orig_sport, __be16 orig_dport,
+					       __be16 sport, __be16 dport,
+					       struct sock *sk)
 {
 	if (sport != orig_sport || dport != orig_dport) {
-		struct flowi4 fl4 = {
-			.flowi4_oif = rt->rt_oif,
-			.flowi4_mark = rt->rt_mark,
-			.daddr = rt->rt_dst,
-			.saddr = rt->rt_src,
-			.flowi4_tos = rt->rt_tos,
-			.flowi4_proto = protocol,
-			.fl4_sport = sport,
-			.fl4_dport = dport
-		};
-		if (inet_sk(sk)->transparent)
-			fl4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
-		if (protocol == IPPROTO_TCP)
-			fl4.flowi4_flags |= FLOWI_FLAG_PRECOW_METRICS;
+		fl4->fl4_dport = dport;
+		fl4->fl4_sport = sport;
 		ip_rt_put(rt);
-		security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
-		return ip_route_output_flow(sock_net(sk), &fl4, sk);
+		security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+		return ip_route_output_flow(sock_net(sk), fl4, sk);
 	}
 	return rt;
 }
 
-extern void rt_bind_peer(struct rtable *rt, int create);
+extern void rt_bind_peer(struct rtable *rt, __be32 daddr, int create);
 
-static inline struct inet_peer *rt_get_peer(struct rtable *rt)
+static inline struct inet_peer *rt_get_peer(struct rtable *rt, __be32 daddr)
 {
 	if (rt->peer)
 		return rt->peer;
 
-	rt_bind_peer(rt, 0);
+	rt_bind_peer(rt, daddr, 0);
 	return rt->peer;
 }
 
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index c01dc99def0..2b447646ce4 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -73,7 +73,6 @@ typedef enum {
 	SCTP_CMD_INIT_FAILED,   /* High level, do init failure work. */
 	SCTP_CMD_REPORT_DUP,	/* Report a duplicate TSN.  */
 	SCTP_CMD_STRIKE,	/* Mark a strike against a transport.  */
-	SCTP_CMD_TRANSMIT,      /* Transmit the outqueue. */
 	SCTP_CMD_HB_TIMERS_START,    /* Start the heartbeat timers. */
 	SCTP_CMD_HB_TIMER_UPDATE,    /* Update a heartbeat timers.  */
 	SCTP_CMD_HB_TIMERS_STOP,     /* Stop the heartbeat timers.  */
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
index c70d8ccc55c..942b864f613 100644
--- a/include/net/sctp/constants.h
+++ b/include/net/sctp/constants.h
@@ -150,7 +150,6 @@ SCTP_SUBTYPE_CONSTRUCTOR(OTHER,		sctp_event_other_t,	other)
 SCTP_SUBTYPE_CONSTRUCTOR(PRIMITIVE,	sctp_event_primitive_t,	primitive)
 
 
-#define sctp_chunk_is_control(a) (a->chunk_hdr->type != SCTP_CID_DATA)
 #define sctp_chunk_is_data(a) (a->chunk_hdr->type == SCTP_CID_DATA)
 
 /* Calculate the actual data size in a data chunk */
@@ -188,15 +187,14 @@ typedef enum {
 /* SCTP state defines for internal state machine */
 typedef enum {
 
-	SCTP_STATE_EMPTY		= 0,
-	SCTP_STATE_CLOSED		= 1,
-	SCTP_STATE_COOKIE_WAIT		= 2,
-	SCTP_STATE_COOKIE_ECHOED	= 3,
-	SCTP_STATE_ESTABLISHED		= 4,
-	SCTP_STATE_SHUTDOWN_PENDING	= 5,
-	SCTP_STATE_SHUTDOWN_SENT	= 6,
-	SCTP_STATE_SHUTDOWN_RECEIVED	= 7,
-	SCTP_STATE_SHUTDOWN_ACK_SENT	= 8,
+	SCTP_STATE_CLOSED		= 0,
+	SCTP_STATE_COOKIE_WAIT		= 1,
+	SCTP_STATE_COOKIE_ECHOED	= 2,
+	SCTP_STATE_ESTABLISHED		= 3,
+	SCTP_STATE_SHUTDOWN_PENDING	= 4,
+	SCTP_STATE_SHUTDOWN_SENT	= 5,
+	SCTP_STATE_SHUTDOWN_RECEIVED	= 6,
+	SCTP_STATE_SHUTDOWN_ACK_SENT	= 7,
 
 } sctp_state_t;
 
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 505845ddb0b..b2c2366676a 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -115,7 +115,6 @@
  * sctp/protocol.c
  */
 extern struct sock *sctp_get_ctl_sock(void);
-extern void sctp_local_addr_free(struct rcu_head *head);
 extern int sctp_copy_local_addr_list(struct sctp_bind_addr *,
 				     sctp_scope_t, gfp_t gfp,
 				     int flags);
@@ -531,7 +530,6 @@ _sctp_walk_params((pos), (chunk), ntohs((chunk)->chunk_hdr.length), member)
 
 #define _sctp_walk_params(pos, chunk, end, member)\
 for (pos.v = chunk->member;\
-     pos.v <= (void *)chunk + end - sizeof(sctp_paramhdr_t) &&\
      pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\
      ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t);\
      pos.v += WORD_ROUND(ntohs(pos.p->length)))
@@ -542,7 +540,6 @@ _sctp_walk_errors((err), (chunk_hdr), ntohs((chunk_hdr)->length))
 #define _sctp_walk_errors(err, chunk_hdr, end)\
 for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
 	    sizeof(sctp_chunkhdr_t));\
-     (void *)err <= (void *)chunk_hdr + end - sizeof(sctp_errhdr_t) &&\
      (void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\
      ntohs(err->length) >= sizeof(sctp_errhdr_t); \
      err = (sctp_errhdr_t *)((void *)err + WORD_ROUND(ntohs(err->length))))
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 9352d12f02d..9148632b820 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -165,6 +165,7 @@ sctp_state_fn_t sctp_sf_do_prm_requestheartbeat;
 sctp_state_fn_t sctp_sf_do_prm_asconf;
 
 /* Prototypes for other event state functions.  */
+sctp_state_fn_t sctp_sf_do_no_pending_tsn;
 sctp_state_fn_t sctp_sf_do_9_2_start_shutdown;
 sctp_state_fn_t sctp_sf_do_9_2_shutdown_ack;
 sctp_state_fn_t sctp_sf_ignore_other;
@@ -232,9 +233,7 @@ struct sctp_chunk *sctp_make_violation_paramlen(const struct sctp_association *,
 				   const struct sctp_chunk *,
 				   struct sctp_paramhdr *);
 struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *,
-				  const struct sctp_transport *,
-				  const void *payload,
-				  const size_t paylen);
+				  const struct sctp_transport *);
 struct sctp_chunk *sctp_make_heartbeat_ack(const struct sctp_association *,
 				      const struct sctp_chunk *,
 				      const void *payload,
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 0f6e60a9c30..795f4886e11 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -564,19 +564,15 @@ struct sctp_af {
 					 int optname,
 					 char __user *optval,
 					 int __user *optlen);
-	struct dst_entry *(*get_dst)	(struct sctp_association *asoc,
-					 union sctp_addr *daddr,
-					 union sctp_addr *saddr);
+	void		(*get_dst)	(struct sctp_transport *t,
+					 union sctp_addr *saddr,
+					 struct flowi *fl,
+					 struct sock *sk);
 	void		(*get_saddr)	(struct sctp_sock *sk,
-					 struct sctp_association *asoc,
-					 struct dst_entry *dst,
-					 union sctp_addr *daddr,
-					 union sctp_addr *saddr);
+					 struct sctp_transport *t,
+					 struct flowi *fl);
 	void		(*copy_addrlist) (struct list_head *,
 					  struct net_device *);
-	void		(*dst_saddr)	(union sctp_addr *saddr,
-					 struct dst_entry *dst,
-					 __be16 port);
 	int		(*cmp_addr)	(const union sctp_addr *addr1,
 					 const union sctp_addr *addr2);
 	void		(*addr_copy)	(union sctp_addr *dst,
@@ -898,6 +894,7 @@ struct sctp_transport {
 		/* Is this structure kfree()able? */
 		malloced:1;
 
+	struct flowi fl;
 
 	/* This is the peer's IP address and port. */
 	union sctp_addr ipaddr;
@@ -1061,7 +1058,7 @@ void sctp_transport_set_owner(struct sctp_transport *,
 			      struct sctp_association *);
 void sctp_transport_route(struct sctp_transport *, union sctp_addr *,
 			  struct sctp_sock *);
-void sctp_transport_pmtu(struct sctp_transport *);
+void sctp_transport_pmtu(struct sctp_transport *, struct sock *sk);
 void sctp_transport_free(struct sctp_transport *);
 void sctp_transport_reset_timers(struct sctp_transport *);
 void sctp_transport_hold(struct sctp_transport *);
@@ -1400,7 +1397,7 @@ int sctp_has_association(const union sctp_addr *laddr,
 int sctp_verify_init(const struct sctp_association *asoc, sctp_cid_t,
 		     sctp_init_chunk_t *peer_init, struct sctp_chunk *chunk,
 		     struct sctp_chunk **err_chunk);
-int sctp_process_init(struct sctp_association *, sctp_cid_t cid,
+int sctp_process_init(struct sctp_association *, struct sctp_chunk *chunk,
 		      const union sctp_addr *peer,
 		      sctp_init_chunk_t *init, gfp_t gfp);
 __u32 sctp_generate_tag(const struct sctp_endpoint *);
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
index 7ea12e8e667..99b027b2adc 100644
--- a/include/net/sctp/ulpevent.h
+++ b/include/net/sctp/ulpevent.h
@@ -132,6 +132,9 @@ struct sctp_ulpevent *sctp_ulpevent_make_authkey(
 	const struct sctp_association *asoc, __u16 key_id,
 	__u32 indication, gfp_t gfp);
 
+struct sctp_ulpevent *sctp_ulpevent_make_sender_dry_event(
+	const struct sctp_association *asoc, gfp_t gfp);
+
 void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
 	struct msghdr *);
 __u16 sctp_ulpevent_get_notification_type(const struct sctp_ulpevent *event);
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index e73ebdae323..32fd5127403 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -91,6 +91,7 @@ typedef __s32 sctp_assoc_t;
 #define SCTP_PEER_AUTH_CHUNKS	26	/* Read only */
 #define SCTP_LOCAL_AUTH_CHUNKS	27	/* Read only */
 #define SCTP_GET_ASSOC_NUMBER	28	/* Read only */
+#define SCTP_GET_ASSOC_ID_LIST	29	/* Read only */
 
 /* Internal Socket Options. Some of the sctp library functions are
  * implemented using these socket options.
@@ -353,6 +354,20 @@ struct sctp_authkey_event {
 
 enum { SCTP_AUTH_NEWKEY = 0, };
 
+/*
+ * 6.1.9. SCTP_SENDER_DRY_EVENT
+ *
+ * When the SCTP stack has no more user data to send or retransmit, this
+ * notification is given to the user. Also, at the time when a user app
+ * subscribes to this event, if there is no data to be sent or
+ * retransmit, the stack will immediately send up this notification.
+ */
+struct sctp_sender_dry_event {
+	__u16 sender_dry_type;
+	__u16 sender_dry_flags;
+	__u32 sender_dry_length;
+	sctp_assoc_t sender_dry_assoc_id;
+};
 
 /*
  * Described in Section 7.3
@@ -368,6 +383,7 @@ struct sctp_event_subscribe {
 	__u8 sctp_partial_delivery_event;
 	__u8 sctp_adaptation_layer_event;
 	__u8 sctp_authentication_event;
+	__u8 sctp_sender_dry_event;
 };
 
 /*
@@ -391,6 +407,7 @@ union sctp_notification {
 	struct sctp_adaptation_event sn_adaptation_event;
 	struct sctp_pdapi_event sn_pdapi_event;
 	struct sctp_authkey_event sn_authkey_event;
+	struct sctp_sender_dry_event sn_sender_dry_event;
 };
 
 /* Section 5.3.1
@@ -407,7 +424,9 @@ enum sctp_sn_type {
 	SCTP_SHUTDOWN_EVENT,
 	SCTP_PARTIAL_DELIVERY_EVENT,
 	SCTP_ADAPTATION_INDICATION,
-	SCTP_AUTHENTICATION_INDICATION,
+	SCTP_AUTHENTICATION_EVENT,
+#define SCTP_AUTHENTICATION_INDICATION	SCTP_AUTHENTICATION_EVENT
+	SCTP_SENDER_DRY_EVENT,
 };
 
 /* Notification error codes used to fill up the error fields in some
@@ -669,6 +688,18 @@ struct sctp_authchunks {
 };
 
 /*
+ * 8.2.6. Get the Current Identifiers of Associations
+ *        (SCTP_GET_ASSOC_ID_LIST)
+ *
+ * This option gets the current list of SCTP association identifiers of
+ * the SCTP associations handled by a one-to-many style socket.
+ */
+struct sctp_assoc_ids {
+	__u32		gaids_number_of_ids;
+	sctp_assoc_t	gaids_assoc_id[];
+};
+
+/*
  * 8.3, 8.5 get all peer/local addresses in an association.
  * This parameter struct is used by SCTP_GET_PEER_ADDRS and 
  * SCTP_GET_LOCAL_ADDRS socket options used internally to implement
diff --git a/include/net/snmp.h b/include/net/snmp.h
index 27461d6dd46..479083a78b0 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -72,14 +72,24 @@ struct icmpmsg_mib {
 
 /* ICMP6 (IPv6-ICMP) */
 #define ICMP6_MIB_MAX	__ICMP6_MIB_MAX
+/* per network ns counters */
 struct icmpv6_mib {
 	unsigned long	mibs[ICMP6_MIB_MAX];
 };
+/* per device counters, (shared on all cpus) */
+struct icmpv6_mib_device {
+	atomic_long_t	mibs[ICMP6_MIB_MAX];
+};
 
 #define ICMP6MSG_MIB_MAX  __ICMP6MSG_MIB_MAX
+/* per network ns counters */
 struct icmpv6msg_mib {
 	unsigned long	mibs[ICMP6MSG_MIB_MAX];
 };
+/* per device counters, (shared on all cpus) */
+struct icmpv6msg_mib_device {
+	atomic_long_t	mibs[ICMP6MSG_MIB_MAX];
+};
 
 
 /* TCP */
@@ -114,6 +124,8 @@ struct linux_xfrm_mib {
  */ 
 #define DEFINE_SNMP_STAT(type, name)	\
 	__typeof__(type) __percpu *name[2]
+#define DEFINE_SNMP_STAT_ATOMIC(type, name)	\
+	__typeof__(type) *name
 #define DECLARE_SNMP_STAT(type, name)	\
 	extern __typeof__(type) __percpu *name[2]
 
@@ -124,6 +136,8 @@ struct linux_xfrm_mib {
 			__this_cpu_inc(mib[0]->mibs[field])
 #define SNMP_INC_STATS_USER(mib, field)	\
 			this_cpu_inc(mib[1]->mibs[field])
+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field)	\
+			atomic_long_inc(&mib->mibs[field])
 #define SNMP_INC_STATS(mib, field)	\
 			this_cpu_inc(mib[!in_softirq()]->mibs[field])
 #define SNMP_DEC_STATS(mib, field)	\
diff --git a/include/net/sock.h b/include/net/sock.h
index da0534d3401..f2046e404a6 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -52,6 +52,7 @@
 #include <linux/mm.h>
 #include <linux/security.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <linux/filter.h>
 #include <linux/rculist_nulls.h>
@@ -1389,6 +1390,59 @@ static inline void sk_nocaps_add(struct sock *sk, int flags)
 	sk->sk_route_caps &= ~flags;
 }
 
+static inline int skb_do_copy_data_nocache(struct sock *sk, struct sk_buff *skb,
+					   char __user *from, char *to,
+					   int copy, int offset)
+{
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		int err = 0;
+		__wsum csum = csum_and_copy_from_user(from, to, copy, 0, &err);
+		if (err)
+			return err;
+		skb->csum = csum_block_add(skb->csum, csum, offset);
+	} else if (sk->sk_route_caps & NETIF_F_NOCACHE_COPY) {
+		if (!access_ok(VERIFY_READ, from, copy) ||
+		    __copy_from_user_nocache(to, from, copy))
+			return -EFAULT;
+	} else if (copy_from_user(to, from, copy))
+		return -EFAULT;
+
+	return 0;
+}
+
+static inline int skb_add_data_nocache(struct sock *sk, struct sk_buff *skb,
+				       char __user *from, int copy)
+{
+	int err, offset = skb->len;
+
+	err = skb_do_copy_data_nocache(sk, skb, from, skb_put(skb, copy),
+				       copy, offset);
+	if (err)
+		__skb_trim(skb, offset);
+
+	return err;
+}
+
+static inline int skb_copy_to_page_nocache(struct sock *sk, char __user *from,
+					   struct sk_buff *skb,
+					   struct page *page,
+					   int off, int copy)
+{
+	int err;
+
+	err = skb_do_copy_data_nocache(sk, skb, from, page_address(page) + off,
+				       copy, skb->len);
+	if (err)
+		return err;
+
+	skb->len	     += copy;
+	skb->data_len	     += copy;
+	skb->truesize	     += copy;
+	sk->sk_wmem_queued   += copy;
+	sk_mem_charge(sk, copy);
+	return 0;
+}
+
 static inline int skb_copy_to_page(struct sock *sk, char __user *from,
 				   struct sk_buff *skb, struct page *page,
 				   int off, int copy)
@@ -1749,7 +1803,7 @@ void sock_net_set(struct sock *sk, struct net *net)
 
 /*
  * Kernel sockets, f.e. rtnl or icmp_socket, are a part of a namespace.
- * They should not hold a referrence to a namespace in order to allow
+ * They should not hold a reference to a namespace in order to allow
  * to stop it.
  * Sockets after sk_change_net should be released using sk_release_kernel
  */
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index eeb077dd735..5271a741c3a 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -7,8 +7,6 @@
  *	IPv6 transport protocols
  */
 
-#ifdef __KERNEL__
-
 extern struct proto rawv6_prot;
 extern struct proto udpv6_prot;
 extern struct proto udplitev6_prot;
@@ -16,7 +14,7 @@ extern struct proto tcpv6_prot;
 
 struct flowi6;
 
-/* extention headers */
+/* extension headers */
 extern int				ipv6_exthdrs_init(void);
 extern void				ipv6_exthdrs_exit(void);
 extern int				ipv6_frag_init(void);
@@ -57,5 +55,3 @@ extern const struct inet_connection_sock_af_ops ipv4_specific;
 extern void inet6_destroy_sock(struct sock *sk);
 
 #endif
-
-#endif
diff --git a/include/net/wimax.h b/include/net/wimax.h
index 3461aa1df1e..7328d5019d8 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -250,7 +250,6 @@
 
 #ifndef __NET__WIMAX_H__
 #define __NET__WIMAX_H__
-#ifdef __KERNEL__
 
 #include <linux/wimax.h>
 #include <net/genetlink.h>
@@ -286,7 +285,7 @@ struct wimax_dev;
  *     does not disconnect the device from the bus and return 0.
  *     If that fails, it should resort to some sort of cold or bus
  *     reset (even if it implies a bus disconnection and device
- *     dissapearance). In that case, -ENODEV should be returned to
+ *     disappearance). In that case, -ENODEV should be returned to
  *     indicate the device is gone.
  *     This operation has to be synchronous, and return only when the
  *     reset is complete. In case of having had to resort to bus/cold
@@ -518,8 +517,4 @@ extern ssize_t wimax_msg_len(struct sk_buff *);
 extern int wimax_rfkill(struct wimax_dev *, enum wimax_rf_state);
 extern int wimax_reset(struct wimax_dev *);
 
-#else
-/* You might be looking for linux/wimax.h */
-#error This file should not be included from user space.
-#endif /* #ifdef __KERNEL__ */
 #endif /* #ifndef __NET__WIMAX_H__ */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
index 85926231c07..d86fffd3c03 100644
--- a/include/net/wpan-phy.h
+++ b/include/net/wpan-phy.h
@@ -28,7 +28,7 @@ struct wpan_phy {
 	struct mutex pib_lock;
 
 	/*
-	 * This is a PIB acording to 802.15.4-2006.
+	 * This is a PIB according to 802.15.4-2006.
 	 * We do not provide timing-related variables, as they
 	 * aren't used outside of driver
 	 */
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6ae4bc5ce8a..b203e14d26b 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -324,6 +324,7 @@ struct xfrm_state_afinfo {
 	int			(*tmpl_sort)(struct xfrm_tmpl **dst, struct xfrm_tmpl **src, int n);
 	int			(*state_sort)(struct xfrm_state **dst, struct xfrm_state **src, int n);
 	int			(*output)(struct sk_buff *skb);
+	int			(*output_finish)(struct sk_buff *skb);
 	int			(*extract_input)(struct xfrm_state *x,
 						 struct sk_buff *skb);
 	int			(*extract_output)(struct xfrm_state *x,
@@ -957,6 +958,15 @@ struct sec_path {
 	struct xfrm_state	*xvec[XFRM_MAX_DEPTH];
 };
 
+static inline int secpath_exists(struct sk_buff *skb)
+{
+#ifdef CONFIG_XFRM
+	return skb->sp != NULL;
+#else
+	return 0;
+#endif
+}
+
 static inline struct sec_path *
 secpath_get(struct sec_path *sp)
 {
@@ -1454,6 +1464,7 @@ static inline int xfrm4_rcv_spi(struct sk_buff *skb, int nexthdr, __be32 spi)
 extern int xfrm4_extract_output(struct xfrm_state *x, struct sk_buff *skb);
 extern int xfrm4_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
 extern int xfrm4_output(struct sk_buff *skb);
+extern int xfrm4_output_finish(struct sk_buff *skb);
 extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family);
 extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family);
 extern int xfrm6_extract_header(struct sk_buff *skb);
@@ -1466,10 +1477,11 @@ extern int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr,
 extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family);
 extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family);
 extern __be32 xfrm6_tunnel_alloc_spi(struct net *net, xfrm_address_t *saddr);
-extern __be32 xfrm6_tunnel_spi_lookup(struct net *net, xfrm_address_t *saddr);
+extern __be32 xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr);
 extern int xfrm6_extract_output(struct xfrm_state *x, struct sk_buff *skb);
 extern int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
 extern int xfrm6_output(struct sk_buff *skb);
+extern int xfrm6_output_finish(struct sk_buff *skb);
 extern int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
 				 u8 **prevhdr);
 
@@ -1560,8 +1572,8 @@ static inline int xfrm_addr_cmp(const xfrm_address_t *a,
 	case AF_INET:
 		return (__force u32)a->a4 - (__force u32)b->a4;
 	case AF_INET6:
-		return ipv6_addr_cmp((struct in6_addr *)a,
-				     (struct in6_addr *)b);
+		return ipv6_addr_cmp((const struct in6_addr *)a,
+				     (const struct in6_addr *)b);
 	}
 }
 
diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h
index b5fc9f39122..ae8c68f30f1 100644
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -217,18 +217,19 @@ static inline enum ib_mtu iboe_get_mtu(int mtu)
 static inline int iboe_get_rate(struct net_device *dev)
 {
 	struct ethtool_cmd cmd;
+	u32 speed;
 
-	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings ||
-	    dev->ethtool_ops->get_settings(dev, &cmd))
+	if (dev_ethtool_get_settings(dev, &cmd))
 		return IB_RATE_PORT_CURRENT;
 
-	if (cmd.speed >= 40000)
+	speed = ethtool_cmd_speed(&cmd);
+	if (speed >= 40000)
 		return IB_RATE_40_GBPS;
-	else if (cmd.speed >= 30000)
+	else if (speed >= 30000)
 		return IB_RATE_30_GBPS;
-	else if (cmd.speed >= 20000)
+	else if (speed >= 20000)
 		return IB_RATE_20_GBPS;
-	else if (cmd.speed >= 10000)
+	else if (speed >= 10000)
 		return IB_RATE_10_GBPS;
 	else
 		return IB_RATE_PORT_CURRENT;
diff --git a/include/rdma/iw_cm.h b/include/rdma/iw_cm.h
index cbb822e8d79..2d0191c90f9 100644
--- a/include/rdma/iw_cm.h
+++ b/include/rdma/iw_cm.h
@@ -46,18 +46,9 @@ enum iw_cm_event_type {
 	IW_CM_EVENT_CLOSE		 /* close complete */
 };
 
-enum iw_cm_event_status {
-	IW_CM_EVENT_STATUS_OK = 0,	 /* request successful */
-	IW_CM_EVENT_STATUS_ACCEPTED = 0, /* connect request accepted */
-	IW_CM_EVENT_STATUS_REJECTED,	 /* connect request rejected */
-	IW_CM_EVENT_STATUS_TIMEOUT,	 /* the operation timed out */
-	IW_CM_EVENT_STATUS_RESET,	 /* reset from remote peer */
-	IW_CM_EVENT_STATUS_EINVAL,	 /* asynchronous failure for bad parm */
-};
-
 struct iw_cm_event {
 	enum iw_cm_event_type event;
-	enum iw_cm_event_status status;
+	int			 status;
 	struct sockaddr_in local_addr;
 	struct sockaddr_in remote_addr;
 	void *private_data;
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 4fae9030464..169f7a53fb0 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -329,4 +329,14 @@ void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr);
  */
 void rdma_set_service_type(struct rdma_cm_id *id, int tos);
 
+/**
+ * rdma_set_reuseaddr - Allow the reuse of local addresses when binding
+ *    the rdma_cm_id.
+ * @id: Communication identifier to configure.
+ * @reuse: Value indicating if the bound address is reusable.
+ *
+ * Reuse must be set before an address is bound to the id.
+ */
+int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse);
+
 #endif /* RDMA_CM_H */
diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h
index 1d165022c02..fc82c1896f7 100644
--- a/include/rdma/rdma_user_cm.h
+++ b/include/rdma/rdma_user_cm.h
@@ -221,8 +221,9 @@ enum {
 
 /* Option details */
 enum {
-	RDMA_OPTION_ID_TOS	= 0,
-	RDMA_OPTION_IB_PATH	= 1
+	RDMA_OPTION_ID_TOS	 = 0,
+	RDMA_OPTION_ID_REUSEADDR = 1,
+	RDMA_OPTION_IB_PATH	 = 1
 };
 
 struct rdma_ucm_set_option {
diff --git a/include/rxrpc/packet.h b/include/rxrpc/packet.h
index 9b2c30897e5..f2902ef7ab7 100644
--- a/include/rxrpc/packet.h
+++ b/include/rxrpc/packet.h
@@ -148,7 +148,7 @@ struct rxkad_challenge {
  * Kerberos security type-2 response packet
  */
 struct rxkad_response {
-	__be32		version;	/* version of this reponse type */
+	__be32		version;	/* version of this response type */
 	__be32		__pad;
 
 	/* encrypted bit of the response */
diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h
index 8a143ca7987..652dec23051 100644
--- a/include/scsi/fc/fc_fcp.h
+++ b/include/scsi/fc/fc_fcp.h
@@ -75,7 +75,7 @@ struct fcp_cmnd32 {
 #define	FCP_PTA_SIMPLE	    0	/* simple task attribute */
 #define	FCP_PTA_HEADQ	    1	/* head of queue task attribute */
 #define	FCP_PTA_ORDERED     2	/* ordered task attribute */
-#define	FCP_PTA_ACA	    4	/* auto. contigent allegiance */
+#define	FCP_PTA_ACA	    4	/* auto. contingent allegiance */
 #define	FCP_PTA_MASK	    7	/* mask for task attribute field */
 #define	FCP_PRI_SHIFT	    3	/* priority field starts in bit 3 */
 #define	FCP_PRI_RESVD_MASK  0x80	/* reserved bits in priority field */
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index c3e1cbcc2ad..ddb04568a50 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -292,7 +292,7 @@ enum iscsi_param {
 	ISCSI_PARAM_PERSISTENT_PORT,
 	ISCSI_PARAM_SESS_RECOVERY_TMO,
 
-	/* pased in through bind conn using transport_fd */
+	/* passed in through bind conn using transport_fd */
 	ISCSI_PARAM_CONN_PORT,
 	ISCSI_PARAM_CONN_ADDRESS,
 
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 24193c1b0da..a3cbda4ddb5 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -260,7 +260,7 @@ struct fcoe_dev_stats {
 /**
  * struct fc_seq_els_data - ELS data used for passing ELS specific responses
  * @reason: The reason for rejection
- * @explan: The explaination of the rejection
+ * @explan: The explanation of the rejection
  *
  * Mainly used by the exchange manager layer.
  */
@@ -525,7 +525,7 @@ struct libfc_function_template {
 			struct fc_frame *);
 
 	/*
-	 * Send an ELS response using infomation from the received frame.
+	 * Send an ELS response using information from the received frame.
 	 *
 	 * STATUS: OPTIONAL
 	 */
@@ -663,7 +663,7 @@ struct libfc_function_template {
 	int (*rport_logoff)(struct fc_rport_priv *);
 
 	/*
-	 * Recieve a request from a remote port.
+	 * Receive a request from a remote port.
 	 *
 	 * STATUS: OPTIONAL
 	 */
@@ -704,7 +704,7 @@ struct libfc_function_template {
 					 void *));
 
 	/*
-	 * Cleanup the FCP layer, used durring link down and reset
+	 * Cleanup the FCP layer, used during link down and reset
 	 *
 	 * STATUS: OPTIONAL
 	 */
diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h
index e6b9fd2eea3..ac0cc1d925e 100644
--- a/include/scsi/libiscsi_tcp.h
+++ b/include/scsi/libiscsi_tcp.h
@@ -52,7 +52,7 @@ struct iscsi_segment {
 	iscsi_segment_done_fn_t	*done;
 };
 
-/* Socket connection recieve helper */
+/* Socket connection receive helper */
 struct iscsi_tcp_recv {
 	struct iscsi_hdr	*hdr;
 	struct iscsi_segment	segment;
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
index 53a9e886612..0a5079974fe 100644
--- a/include/scsi/osd_initiator.h
+++ b/include/scsi/osd_initiator.h
@@ -265,7 +265,7 @@ int osd_execute_request_async(struct osd_request *or,
  * @osi           - Recievs a more detailed error report information (optional).
  * @silent        - Do not print to dmsg (Even if enabled)
  * @bad_obj_list  - Some commands act on multiple objects. Failed objects will
- *                  be recieved here (optional)
+ *                  be received here (optional)
  * @max_obj       - Size of @bad_obj_list.
  * @bad_attr_list - List of failing attributes (optional)
  * @max_attr      - Size of @bad_attr_list.
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 2d3ec509468..dd82e02ddde 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -169,6 +169,7 @@ struct scsi_device {
 				sdev_dev;
 
 	struct execute_work	ew; /* used to get process context on put */
+	struct work_struct	requeue_work;
 
 	struct scsi_dh_data	*scsi_dh_data;
 	enum scsi_device_state sdev_state;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index e7e385842a3..f1f2644137b 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -46,7 +46,7 @@ struct blk_queue_tags;
 enum {
 	SCSI_QDEPTH_DEFAULT,	/* default requested change, e.g. from sysfs */
 	SCSI_QDEPTH_QFULL,	/* scsi-ml requested due to queue full */
-	SCSI_QDEPTH_RAMP_UP,	/* scsi-ml requested due to threshhold event */
+	SCSI_QDEPTH_RAMP_UP,	/* scsi-ml requested due to threshold event */
 };
 
 struct scsi_host_template {
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 59816fe31e6..2a65167a8f1 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -192,9 +192,9 @@ struct fc_vport_identifiers {
  *
  * This structure exists for each FC port is a virtual FC port. Virtual
  * ports share the physical link with the Physical port. Each virtual
- * ports has a unique presense on the SAN, and may be instantiated via
+ * ports has a unique presence on the SAN, and may be instantiated via
  * NPIV, Virtual Fabrics, or via additional ALPAs. As the vport is a
- * unique presense, each vport has it's own view of the fabric,
+ * unique presence, each vport has it's own view of the fabric,
  * authentication privilege, and priorities.
  *
  * A virtual port may support 1 or more FC4 roles. Typically it is a
@@ -370,7 +370,7 @@ struct fc_rport {	/* aka fc_starget_attrs */
 /*
  * FC SCSI Target Attributes
  *
- * The SCSI Target is considered an extention of a remote port (as
+ * The SCSI Target is considered an extension of a remote port (as
  * a remote port can be more than a SCSI Target). Within the scsi
  * subsystem, we leave the Target as a separate entity. Doing so
  * provides backward compatibility with prior FC transport api's,
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index f1dcefe4532..02cbb50225b 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -385,7 +385,7 @@
 #define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */
 #define AC97_SCAP_NO_SPDIF	(1<<9)	/* don't build SPDIF controls */
 #define AC97_SCAP_EAPD_LED	(1<<10)	/* EAPD as mute LED */
-#define AC97_SCAP_POWER_SAVE	(1<<11)	/* capable for aggresive power-saving */
+#define AC97_SCAP_POWER_SAVE	(1<<11)	/* capable for aggressive power-saving */
 
 /* ac97->flags */
 #define AC97_HAS_PC_BEEP	(1<<0)	/* force PC Speaker usage */
diff --git a/include/sound/control.h b/include/sound/control.h
index e67db286936..404acb859ce 100644
--- a/include/sound/control.h
+++ b/include/sound/control.h
@@ -191,7 +191,7 @@ int _snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave,
  * Returns zero if successful or a negative error code.
  *
  * All slaves must be the same type (returning the same information
- * via info callback).  The fucntion doesn't check it, so it's your
+ * via info callback).  The function doesn't check it, so it's your
  * responsibility.
  *
  * Also, some additional limitations:
diff --git a/include/sound/cs46xx_dsp_spos.h b/include/sound/cs46xx_dsp_spos.h
index 49b03c9e5e5..8008c59288a 100644
--- a/include/sound/cs46xx_dsp_spos.h
+++ b/include/sound/cs46xx_dsp_spos.h
@@ -147,7 +147,7 @@ struct dsp_pcm_channel_descriptor {
 };
 
 struct dsp_spos_instance {
-	struct dsp_symbol_desc symbol_table; /* currently availble loaded symbols in SP */
+	struct dsp_symbol_desc symbol_table; /* currently available loaded symbols in SP */
 
 	int nmodules;
 	struct dsp_module_desc * modules; /* modules loaded into SP */
diff --git a/include/sound/hdspm.h b/include/sound/hdspm.h
index 1774ff5ff63..1f59ea2a4a7 100644
--- a/include/sound/hdspm.h
+++ b/include/sound/hdspm.h
@@ -193,7 +193,7 @@ struct hdspm_version {
  * 32768 Bytes
  */
 
-/* organisation is 64 channelfader in a continous memory block */
+/* organisation is 64 channelfader in a continuous memory block */
 /* equivalent to hardware definition, maybe for future feature of mmap of
  * them
  */
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 979ed84e07d..f72c1039a6f 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -23,7 +23,7 @@
 /*
  * SoC dynamic audio power management
  *
- * We can have upto 4 power domains
+ * We can have up to 4 power domains
  * 	1. Codec domain - VREF, VMID
  *     Usually controlled at codec probe/remove, although can be set
  *     at stream time if power is not needed for sidetone, etc.
@@ -45,25 +45,25 @@
 /* platform domain */
 #define SND_SOC_DAPM_INPUT(wname) \
 {	.id = snd_soc_dapm_input, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0}
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM }
 #define SND_SOC_DAPM_OUTPUT(wname) \
 {	.id = snd_soc_dapm_output, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0}
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM }
 #define SND_SOC_DAPM_MIC(wname, wevent) \
 {	.id = snd_soc_dapm_mic, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
 #define SND_SOC_DAPM_HP(wname, wevent) \
 {	.id = snd_soc_dapm_hp, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
 #define SND_SOC_DAPM_SPK(wname, wevent) \
 {	.id = snd_soc_dapm_spk, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
 #define SND_SOC_DAPM_LINE(wname, wevent) \
 {	.id = snd_soc_dapm_line, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
 
 /* path domain */
@@ -189,11 +189,11 @@
 /* events that are pre and post DAPM */
 #define SND_SOC_DAPM_PRE(wname, wevent) \
 {	.id = snd_soc_dapm_pre, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD}
 #define SND_SOC_DAPM_POST(wname, wevent) \
 {	.id = snd_soc_dapm_post, .name = wname, .kcontrols = NULL, \
-	.num_kcontrols = 0, .event = wevent, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
 	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD}
 
 /* stream domain */
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index c15ed5026fb..1d3b5b2f0db 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -22,7 +22,7 @@
  * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and
  * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use
  * 16-byte CDBs by default and require an extra allocation for
- * 32-byte CDBs to becasue of legacy issues.
+ * 32-byte CDBs to because of legacy issues.
  *
  * Within TCM Core there are no such legacy limitiations, so we go ahead
  * use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size()
@@ -302,7 +302,7 @@ struct t10_wwn {
 
 
 /*
- * Used by TCM Core internally to signal if >= SPC-3 peristent reservations
+ * Used by TCM Core internally to signal if >= SPC-3 persistent reservations
  * emulation is enabled or disabled, or running in with TCM/pSCSI passthrough
  * mode
  */
@@ -934,7 +934,7 @@ struct se_portal_group {
 	struct list_head	acl_node_list;
 	struct se_lun		*tpg_lun_list;
 	struct se_lun		tpg_virt_lun0;
-	/* List of TCM sessions assoicated wth this TPG */
+	/* List of TCM sessions associated wth this TPG */
 	struct list_head	tpg_sess_list;
 	/* Pointer to $FABRIC_MOD dependent code */
 	struct target_core_fabric_ops *se_tpg_tfo;
diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h
index 5eb8b1ae59d..dc78f77f945 100644
--- a/include/target/target_core_fabric_ops.h
+++ b/include/target/target_core_fabric_ops.h
@@ -35,7 +35,7 @@ struct target_core_fabric_ops {
 	/*
 	 * Optional function pointer for TCM to perform command map
 	 * from TCM processing thread context, for those struct se_cmd
-	 * initally allocated in interrupt context.
+	 * initially allocated in interrupt context.
 	 */
 	int (*new_cmd_map)(struct se_cmd *);
 	/*
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index 78f18adb49c..bf366547da2 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -401,9 +401,9 @@ TRACE_EVENT(block_plug,
 
 DECLARE_EVENT_CLASS(block_unplug,
 
-	TP_PROTO(struct request_queue *q),
+	TP_PROTO(struct request_queue *q, unsigned int depth, bool explicit),
 
-	TP_ARGS(q),
+	TP_ARGS(q, depth, explicit),
 
 	TP_STRUCT__entry(
 		__field( int,		nr_rq			)
@@ -411,7 +411,7 @@ DECLARE_EVENT_CLASS(block_unplug,
 	),
 
 	TP_fast_assign(
-		__entry->nr_rq	= q->rq.count[READ] + q->rq.count[WRITE];
+		__entry->nr_rq = depth;
 		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
 	),
 
@@ -419,31 +419,19 @@ DECLARE_EVENT_CLASS(block_unplug,
 );
 
 /**
- * block_unplug_timer - timed release of operations requests in queue to device driver
- * @q: request queue to unplug
- *
- * Unplug the request queue @q because a timer expired and allow block
- * operation requests to be sent to the device driver.
- */
-DEFINE_EVENT(block_unplug, block_unplug_timer,
-
-	TP_PROTO(struct request_queue *q),
-
-	TP_ARGS(q)
-);
-
-/**
- * block_unplug_io - release of operations requests in request queue
+ * block_unplug - release of operations requests in request queue
  * @q: request queue to unplug
+ * @depth: number of requests just added to the queue
+ * @explicit: whether this was an explicit unplug, or one from schedule()
  *
  * Unplug request queue @q because device driver is scheduled to work
  * on elements in the request queue.
  */
-DEFINE_EVENT(block_unplug, block_unplug_io,
+DEFINE_EVENT(block_unplug, block_unplug,
 
-	TP_PROTO(struct request_queue *q),
+	TP_PROTO(struct request_queue *q, unsigned int depth, bool explicit),
 
-	TP_ARGS(q)
+	TP_ARGS(q, depth, explicit)
 );
 
 /**
diff --git a/include/trace/events/gfpflags.h b/include/trace/events/gfpflags.h
index e3615c09374..9fe3a36646e 100644
--- a/include/trace/events/gfpflags.h
+++ b/include/trace/events/gfpflags.h
@@ -10,6 +10,7 @@
  */
 #define show_gfp_flags(flags)						\
 	(flags) ? __print_flags(flags, "|",				\
+	{(unsigned long)GFP_TRANSHUGE,		"GFP_TRANSHUGE"},	\
 	{(unsigned long)GFP_HIGHUSER_MOVABLE,	"GFP_HIGHUSER_MOVABLE"}, \
 	{(unsigned long)GFP_HIGHUSER,		"GFP_HIGHUSER"},	\
 	{(unsigned long)GFP_USER,		"GFP_USER"},		\
@@ -32,6 +33,9 @@
 	{(unsigned long)__GFP_HARDWALL,		"GFP_HARDWALL"},	\
 	{(unsigned long)__GFP_THISNODE,		"GFP_THISNODE"},	\
 	{(unsigned long)__GFP_RECLAIMABLE,	"GFP_RECLAIMABLE"},	\
-	{(unsigned long)__GFP_MOVABLE,		"GFP_MOVABLE"}		\
+	{(unsigned long)__GFP_MOVABLE,		"GFP_MOVABLE"},		\
+	{(unsigned long)__GFP_NOTRACK,		"GFP_NOTRACK"},		\
+	{(unsigned long)__GFP_NO_KSWAPD,	"GFP_NO_KSWAPD"},	\
+	{(unsigned long)__GFP_OTHER_NODE,	"GFP_OTHER_NODE"}	\
 	) : "GFP_NOWAIT"
 
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
index 1c09820df58..ae045ca7d35 100644
--- a/include/trace/events/irq.h
+++ b/include/trace/events/irq.h
@@ -20,8 +20,7 @@ struct softirq_action;
 			 softirq_name(BLOCK_IOPOLL),	\
 			 softirq_name(TASKLET),		\
 			 softirq_name(SCHED),		\
-			 softirq_name(HRTIMER),		\
-			 softirq_name(RCU))
+			 softirq_name(HRTIMER))
 
 /**
  * irq_handler_entry - called immediately before the irq action handler
diff --git a/include/video/kyro.h b/include/video/kyro.h
index dba7de2ee4a..c563968e926 100644
--- a/include/video/kyro.h
+++ b/include/video/kyro.h
@@ -32,7 +32,7 @@ struct kyrofb_info {
 	u32 PIXCLK;	/* Pixel Clock       */
 	u32 HCLK;	/* Hor Clock         */
 
-	/* Usefull to hold depth here for Linux */
+	/* Useful to hold depth here for Linux */
 	u8 PIXDEPTH;
 
 #ifdef CONFIG_MTRR
diff --git a/include/video/neomagic.h b/include/video/neomagic.h
index 08b66378295..bc5013e8059 100644
--- a/include/video/neomagic.h
+++ b/include/video/neomagic.h
@@ -129,7 +129,7 @@ struct neofb_par {
 	unsigned char CRTC[25];		/* Crtc Controller */
 	unsigned char Sequencer[5];	/* Video Sequencer */
 	unsigned char Graphics[9];	/* Video Graphics */
-	unsigned char Attribute[21];	/* Video Atribute */
+	unsigned char Attribute[21];	/* Video Attribute */
 
 	unsigned char GeneralLockReg;
 	unsigned char ExtCRTDispAddr;
diff --git a/include/video/newport.h b/include/video/newport.h
index 001b935e71c..3d7c4b492ec 100644
--- a/include/video/newport.h
+++ b/include/video/newport.h
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
  * 
- * Ulf Carlsson - Compability with the IRIX structures added
+ * Ulf Carlsson - Compatibility with the IRIX structures added
  */
 
 #ifndef _SGI_NEWPORT_H
diff --git a/include/video/sisfb.h b/include/video/sisfb.h
index fdd74f1a679..6dc5df9e43f 100644
--- a/include/video/sisfb.h
+++ b/include/video/sisfb.h
@@ -151,7 +151,7 @@ struct sisfb_cmd {
 	__u32  sisfb_result[4];
 };
 
-/* Addtional IOCTLs for communication sisfb <> X driver                */
+/* Additional IOCTLs for communication sisfb <> X driver                */
 /* If changing this, vgatypes.h must also be changed (for X driver)    */
 
 /* ioctl for identifying and giving some info (esp. memory heap start) */
diff --git a/include/video/sstfb.h b/include/video/sstfb.h
index b52f0738124..c449eace12c 100644
--- a/include/video/sstfb.h
+++ b/include/video/sstfb.h
@@ -156,7 +156,7 @@
 #define DAC_READ		FBIINIT2	/* in remap mode */
 #define FBIINIT3		0x021c		/* fbi controls */
 #  define DISABLE_TEXTURE	  BIT(6)
-#  define Y_SWAP_ORIGIN_SHIFT	  22		/* Y swap substraction value */
+#  define Y_SWAP_ORIGIN_SHIFT	  22		/* Y swap subtraction value */
 #define HSYNC			0x0220
 #define VSYNC			0x0224
 #define DAC_DATA		0x022c
@@ -212,9 +212,9 @@
 #  define DACREG_CR0_24BPP	  0x50		/* mode 5 */
 #define	DACREG_CR1_I		0x05
 #define DACREG_CC_I		0x06
-#  define DACREG_CC_CLKA	  BIT(7)	/* clk A controled by regs */
+#  define DACREG_CC_CLKA	  BIT(7)	/* clk A controlled by regs */
 #  define DACREG_CC_CLKA_C	  (2<<4)	/* clk A uses reg C */
-#  define DACREG_CC_CLKB	  BIT(3)	/* clk B controled by regs */
+#  define DACREG_CC_CLKB	  BIT(3)	/* clk B controlled by regs */
 #  define DACREG_CC_CLKB_D	  3		/* clkB uses reg D */
 #define DACREG_AC0_I		0x48		/* clock A reg C */
 #define DACREG_AC1_I		0x49
diff --git a/include/xen/events.h b/include/xen/events.h
index f1b87ad48ac..9af21e19545 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -85,7 +85,8 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi,
 int xen_allocate_pirq_msi(struct pci_dev *dev, struct msi_desc *msidesc);
 /* Bind an PSI pirq to an irq. */
 int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
-			     int pirq, int vector, const char *name);
+			     int pirq, int vector, const char *name,
+			     domid_t domid);
 #endif
 
 /* De-allocates the above mentioned physical interrupt. */
@@ -94,4 +95,10 @@ int xen_destroy_irq(int irq);
 /* Return irq from pirq */
 int xen_irq_from_pirq(unsigned pirq);
 
+/* Return the pirq allocated to the irq. */
+int xen_pirq_from_irq(unsigned irq);
+
+/* Determine whether to ignore this IRQ if it is passed to a guest. */
+int xen_test_irq_shared(int irq);
+
 #endif	/* _XEN_EVENTS_H */
diff --git a/include/xen/interface/elfnote.h b/include/xen/interface/elfnote.h
index 7a8262c375c..0360b15f488 100644
--- a/include/xen/interface/elfnote.h
+++ b/include/xen/interface/elfnote.h
@@ -51,7 +51,7 @@
 
 /*
  * The offset of the ELF paddr field from the acutal required
- * psuedo-physical address (numeric).
+ * pseudo-physical address (numeric).
  *
  * This is used to maintain backwards compatibility with older kernels
  * which wrote __PAGE_OFFSET into that field. This field defaults to 0
diff --git a/init/Kconfig b/init/Kconfig
index 56240e724d9..4986ecc49e6 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -485,7 +485,7 @@ config TREE_RCU_TRACE
 
 config RCU_BOOST
 	bool "Enable RCU priority boosting"
-	depends on RT_MUTEXES && TINY_PREEMPT_RCU
+	depends on RT_MUTEXES && PREEMPT_RCU
 	default n
 	help
 	  This option boosts the priority of preempted RCU readers that
@@ -827,6 +827,11 @@ config SCHED_AUTOGROUP
 	  desktop applications.  Task group autogeneration is currently based
 	  upon task session.
 
+config SCHED_TTWU_QUEUE
+	bool
+	depends on !SPARC32
+	default y
+
 config MM_OWNER
 	bool
 
@@ -924,14 +929,6 @@ menuconfig EXPERT
           environments which can tolerate a "non-standard" kernel.
           Only use this if you really know what you are doing.
 
-config EMBEDDED
-	bool "Embedded system"
-	select EXPERT
-	help
-	  This option should be enabled if compiling the kernel for
-	  an embedded system so certain expert options are available
-	  for configuration.
-
 config UID16
 	bool "Enable 16-bit UID system calls" if EXPERT
 	depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION)
@@ -1104,6 +1101,14 @@ config AIO
           by some high performance threaded applications. Disabling
           this option saves about 7k.
 
+config EMBEDDED
+	bool "Embedded system"
+	select EXPERT
+	help
+	  This option should be enabled if compiling the kernel for
+	  an embedded system so certain expert options are available
+	  for configuration.
+
 config HAVE_PERF_EVENTS
 	bool
 	help
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 3e011215779..c0851a8e030 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -186,7 +186,7 @@ dev_t name_to_dev_t(char *name)
 		goto done;
 
 	/*
-	 * try non-existant, but valid partition, which may only exist
+	 * try non-existent, but valid partition, which may only exist
 	 * after revalidating the disk, like partitioned md devices
 	 */
 	while (p > s && isdigit(p[-1]))
diff --git a/init/main.c b/init/main.c
index 4a9479ef454..48df882d51d 100644
--- a/init/main.c
+++ b/init/main.c
@@ -580,8 +580,8 @@ asmlinkage void __init start_kernel(void)
 #endif
 	page_cgroup_init();
 	enable_debug_pagealloc();
-	kmemleak_init();
 	debug_objects_mem_init();
+	kmemleak_init();
 	setup_per_cpu_pageset();
 	numa_policy_init();
 	if (late_time_init)
diff --git a/ipc/msg.c b/ipc/msg.c
index 0e732e92e22..7385de25788 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -704,7 +704,7 @@ long do_msgsnd(int msqid, long mtype, void __user *mtext,
 	msq->q_stime = get_seconds();
 
 	if (!pipelined_send(msq, msg)) {
-		/* noone is waiting for this message, enqueue it */
+		/* no one is waiting for this message, enqueue it */
 		list_add_tail(&msg->m_list, &msq->q_messages);
 		msq->q_cbytes += msgsz;
 		msq->q_qnum++;
@@ -842,7 +842,7 @@ long do_msgrcv(int msqid, long *pmtype, void __user *mtext,
 		 * Disable preemption.  We don't hold a reference to the queue
 		 * and getting a reference would defeat the idea of a lockless
 		 * operation, thus the code relies on rcu to guarantee the
-		 * existance of msq:
+		 * existence of msq:
 		 * Prior to destruction, expunge_all(-EIRDM) changes r_msg.
 		 * Thus if r_msg is -EAGAIN, then the queue not yet destroyed.
 		 * rcu_read_lock() prevents preemption between reading r_msg
diff --git a/ipc/sem.c b/ipc/sem.c
index ae040a0727c..34193ed69fb 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1362,7 +1362,7 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
 	 * semid identifiers are not unique - find_alloc_undo may have
 	 * allocated an undo structure, it was invalidated by an RMID
 	 * and now a new array with received the same id. Check and fail.
-	 * This case can be detected checking un->semid. The existance of
+	 * This case can be detected checking un->semid. The existence of
 	 * "un" itself is guaranteed by rcu.
 	 */
 	error = -EIDRM;
diff --git a/ipc/shm.c b/ipc/shm.c
index 8644452f5c4..729acb7e314 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -1056,7 +1056,7 @@ SYSCALL_DEFINE1(shmdt, char __user *, shmaddr)
 	/*
 	 * We need look no further than the maximum address a fragment
 	 * could possibly have landed at. Also cast things to loff_t to
-	 * prevent overflows and make comparisions vs. equal-width types.
+	 * prevent overflows and make comparisons vs. equal-width types.
 	 */
 	size = PAGE_ALIGN(size);
 	while (vma && (loff_t)(vma->vm_end - addr) <= size) {
diff --git a/kernel/Makefile b/kernel/Makefile
index 85cbfb31e73..e9cf19155b4 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -21,7 +21,6 @@ CFLAGS_REMOVE_mutex-debug.o = -pg
 CFLAGS_REMOVE_rtmutex-debug.o = -pg
 CFLAGS_REMOVE_cgroup-debug.o = -pg
 CFLAGS_REMOVE_sched_clock.o = -pg
-CFLAGS_REMOVE_perf_event.o = -pg
 CFLAGS_REMOVE_irq_work.o = -pg
 endif
 
@@ -103,8 +102,9 @@ obj-$(CONFIG_RING_BUFFER) += trace/
 obj-$(CONFIG_TRACEPOINTS) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_IRQ_WORK) += irq_work.o
-obj-$(CONFIG_PERF_EVENTS) += perf_event.o
-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
+
+obj-$(CONFIG_PERF_EVENTS) += events/
+
 obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
 obj-$(CONFIG_PADATA) += padata.o
 obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 37b2bea170c..e99dda04b12 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -607,7 +607,7 @@ void audit_trim_trees(void)
 		spin_lock(&hash_lock);
 		list_for_each_entry(node, &tree->chunks, list) {
 			struct audit_chunk *chunk = find_chunk(node);
-			/* this could be NULL if the watch is dieing else where... */
+			/* this could be NULL if the watch is dying else where... */
 			struct inode *inode = chunk->mark.i.inode;
 			node->index |= 1U<<31;
 			if (iterate_mounts(compare_root, inode, root_mnt))
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index f49a0318c2e..b33513a08be 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1011,7 +1011,7 @@ static int audit_log_pid_context(struct audit_context *context, pid_t pid,
 /*
  * to_send and len_sent accounting are very loose estimates.  We aren't
  * really worried about a hard cap to MAX_EXECVE_AUDIT_LEN so much as being
- * within about 500 bytes (next page boundry)
+ * within about 500 bytes (next page boundary)
  *
  * why snprintf?  an int is up to 12 digits long.  if we just assumed when
  * logging that a[%d]= was going to be 16 characters long we would be wasting
diff --git a/kernel/capability.c b/kernel/capability.c
index bf0c734d0c1..32a80e08ff4 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -399,3 +399,15 @@ bool task_ns_capable(struct task_struct *t, int cap)
 	return ns_capable(task_cred_xxx(t, user)->user_ns, cap);
 }
 EXPORT_SYMBOL(task_ns_capable);
+
+/**
+ * nsown_capable - Check superior capability to one's own user_ns
+ * @cap: The capability in question
+ *
+ * Return true if the current task has the given superior capability
+ * targeted at its own user namespace.
+ */
+bool nsown_capable(int cap)
+{
+	return ns_capable(current_user_ns(), cap);
+}
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index e31b220a743..909a35510af 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -157,7 +157,7 @@ struct css_id {
 };
 
 /*
- * cgroup_event represents events which userspace want to recieve.
+ * cgroup_event represents events which userspace want to receive.
  */
 struct cgroup_event {
 	/*
@@ -326,12 +326,6 @@ static struct hlist_head *css_set_hash(struct cgroup_subsys_state *css[])
 	return &css_set_table[index];
 }
 
-static void free_css_set_rcu(struct rcu_head *obj)
-{
-	struct css_set *cg = container_of(obj, struct css_set, rcu_head);
-	kfree(cg);
-}
-
 /* We don't maintain the lists running through each css_set to its
  * task until after the first call to cgroup_iter_start(). This
  * reduces the fork()/exit() overhead for people who have cgroups
@@ -375,7 +369,7 @@ static void __put_css_set(struct css_set *cg, int taskexit)
 	}
 
 	write_unlock(&css_set_lock);
-	call_rcu(&cg->rcu_head, free_css_set_rcu);
+	kfree_rcu(cg, rcu_head);
 }
 
 /*
@@ -812,13 +806,6 @@ static int cgroup_call_pre_destroy(struct cgroup *cgrp)
 	return ret;
 }
 
-static void free_cgroup_rcu(struct rcu_head *obj)
-{
-	struct cgroup *cgrp = container_of(obj, struct cgroup, rcu_head);
-
-	kfree(cgrp);
-}
-
 static void cgroup_diput(struct dentry *dentry, struct inode *inode)
 {
 	/* is dentry a directory ? if so, kfree() associated cgroup */
@@ -856,7 +843,7 @@ static void cgroup_diput(struct dentry *dentry, struct inode *inode)
 		 */
 		BUG_ON(!list_empty(&cgrp->pidlists));
 
-		call_rcu(&cgrp->rcu_head, free_cgroup_rcu);
+		kfree_rcu(cgrp, rcu_head);
 	}
 	iput(inode);
 }
@@ -4623,14 +4610,6 @@ bool css_is_ancestor(struct cgroup_subsys_state *child,
 	return ret;
 }
 
-static void __free_css_id_cb(struct rcu_head *head)
-{
-	struct css_id *id;
-
-	id = container_of(head, struct css_id, rcu_head);
-	kfree(id);
-}
-
 void free_css_id(struct cgroup_subsys *ss, struct cgroup_subsys_state *css)
 {
 	struct css_id *id = css->id;
@@ -4645,7 +4624,7 @@ void free_css_id(struct cgroup_subsys *ss, struct cgroup_subsys_state *css)
 	spin_lock(&ss->id_lock);
 	idr_remove(&ss->idr, id->id);
 	spin_unlock(&ss->id_lock);
-	call_rcu(&id->rcu_head, __free_css_id_cb);
+	kfree_rcu(id, rcu_head);
 }
 EXPORT_SYMBOL_GPL(free_css_id);
 
diff --git a/kernel/compat.c b/kernel/compat.c
index 38b1d2c1cbe..9214dcd087b 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -890,10 +890,9 @@ compat_sys_rt_sigtimedwait (compat_sigset_t __user *uthese,
 {
 	compat_sigset_t s32;
 	sigset_t s;
-	int sig;
 	struct timespec t;
 	siginfo_t info;
-	long ret, timeout = 0;
+	long ret;
 
 	if (sigsetsize != sizeof(sigset_t))
 		return -EINVAL;
@@ -901,51 +900,19 @@ compat_sys_rt_sigtimedwait (compat_sigset_t __user *uthese,
 	if (copy_from_user(&s32, uthese, sizeof(compat_sigset_t)))
 		return -EFAULT;
 	sigset_from_compat(&s, &s32);
-	sigdelsetmask(&s,sigmask(SIGKILL)|sigmask(SIGSTOP));
-	signotset(&s);
 
 	if (uts) {
-		if (get_compat_timespec (&t, uts))
+		if (get_compat_timespec(&t, uts))
 			return -EFAULT;
-		if (t.tv_nsec >= 1000000000L || t.tv_nsec < 0
-				|| t.tv_sec < 0)
-			return -EINVAL;
 	}
 
-	spin_lock_irq(&current->sighand->siglock);
-	sig = dequeue_signal(current, &s, &info);
-	if (!sig) {
-		timeout = MAX_SCHEDULE_TIMEOUT;
-		if (uts)
-			timeout = timespec_to_jiffies(&t)
-				+(t.tv_sec || t.tv_nsec);
-		if (timeout) {
-			current->real_blocked = current->blocked;
-			sigandsets(&current->blocked, &current->blocked, &s);
-
-			recalc_sigpending();
-			spin_unlock_irq(&current->sighand->siglock);
-
-			timeout = schedule_timeout_interruptible(timeout);
-
-			spin_lock_irq(&current->sighand->siglock);
-			sig = dequeue_signal(current, &s, &info);
-			current->blocked = current->real_blocked;
-			siginitset(&current->real_blocked, 0);
-			recalc_sigpending();
-		}
-	}
-	spin_unlock_irq(&current->sighand->siglock);
+	ret = do_sigtimedwait(&s, &info, uts ? &t : NULL);
 
-	if (sig) {
-		ret = sig;
-		if (uinfo) {
-			if (copy_siginfo_to_user32(uinfo, &info))
-				ret = -EFAULT;
-		}
-	}else {
-		ret = timeout?-EINTR:-EAGAIN;
+	if (ret > 0 && uinfo) {
+		if (copy_siginfo_to_user32(uinfo, &info))
+			ret = -EFAULT;
 	}
+
 	return ret;
 
 }
diff --git a/kernel/cpu.c b/kernel/cpu.c
index c95fc4df0fa..12b7458f23b 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -126,7 +126,7 @@ static void cpu_hotplug_done(void)
 #else /* #if CONFIG_HOTPLUG_CPU */
 static void cpu_hotplug_begin(void) {}
 static void cpu_hotplug_done(void) {}
-#endif	/* #esle #if CONFIG_HOTPLUG_CPU */
+#endif	/* #else #if CONFIG_HOTPLUG_CPU */
 
 /* Need to know about CPUs going up/down? */
 int __ref register_cpu_notifier(struct notifier_block *nb)
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 33eee16addb..2bb8c2e98ff 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1159,7 +1159,7 @@ int current_cpuset_is_being_rebound(void)
 static int update_relax_domain_level(struct cpuset *cs, s64 val)
 {
 #ifdef CONFIG_SMP
-	if (val < -1 || val >= SD_LV_MAX)
+	if (val < -1 || val >= sched_domain_level_max)
 		return -EINVAL;
 #endif
 
diff --git a/kernel/cred.c b/kernel/cred.c
index 5557b55048d..8093c16b84b 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -54,6 +54,7 @@ struct cred init_cred = {
 	.cap_effective		= CAP_INIT_EFF_SET,
 	.cap_bset		= CAP_INIT_BSET,
 	.user			= INIT_USER,
+	.user_ns		= &init_user_ns,
 	.group_info		= &init_groups,
 #ifdef CONFIG_KEYS
 	.tgcred			= &init_tgcred,
@@ -410,6 +411,11 @@ int copy_creds(struct task_struct *p, unsigned long clone_flags)
 			goto error_put;
 	}
 
+	/* cache user_ns in cred.  Doesn't need a refcount because it will
+	 * stay pinned by cred->user
+	 */
+	new->user_ns = new->user->user_ns;
+
 #ifdef CONFIG_KEYS
 	/* new threads get their own thread keyrings if their parent already
 	 * had one */
@@ -741,12 +747,6 @@ int set_create_files_as(struct cred *new, struct inode *inode)
 }
 EXPORT_SYMBOL(set_create_files_as);
 
-struct user_namespace *current_user_ns(void)
-{
-	return _current_user_ns();
-}
-EXPORT_SYMBOL(current_user_ns);
-
 #ifdef CONFIG_DEBUG_CREDENTIALS
 
 bool creds_are_invalid(const struct cred *cred)
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index cefd4a11f6d..bad6786dee8 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -538,7 +538,7 @@ return_normal:
 
 	/*
 	 * For single stepping, try to only enter on the processor
-	 * that was single stepping.  To gaurd against a deadlock, the
+	 * that was single stepping.  To guard against a deadlock, the
 	 * kernel will only try for the value of sstep_tries before
 	 * giving up and continuing on.
 	 */
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 6bc6e3bc4f9..be14779bcef 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -441,9 +441,9 @@ static int kdb_check_regs(void)
  *	symbol name, and offset to the caller.
  *
  *	The argument may consist of a numeric value (decimal or
- *	hexidecimal), a symbol name, a register name (preceeded by the
+ *	hexidecimal), a symbol name, a register name (preceded by the
  *	percent sign), an environment variable with a numeric value
- *	(preceeded by a dollar sign) or a simple arithmetic expression
+ *	(preceded by a dollar sign) or a simple arithmetic expression
  *	consisting of a symbol name, +/-, and a numeric constant value
  *	(offset).
  * Parameters:
@@ -1335,7 +1335,7 @@ void kdb_print_state(const char *text, int value)
  *	error		The hardware-defined error code
  *	reason2		kdb's current reason code.
  *			Initially error but can change
- *			acording to kdb state.
+ *			according to kdb state.
  *	db_result	Result code from break or debug point.
  *	regs		The exception frame at time of fault/breakpoint.
  *			should always be valid.
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index 6b2485dcb05..5532dd37aa8 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -545,7 +545,7 @@ int kdb_putword(unsigned long addr, unsigned long word, size_t size)
  *	Mask for process state.
  * Notes:
  *	The mask folds data from several sources into a single long value, so
- *	be carefull not to overlap the bits.  TASK_* bits are in the LSB,
+ *	be careful not to overlap the bits.  TASK_* bits are in the LSB,
  *	special cases like UNRUNNABLE are in the MSB.  As of 2.6.10-rc1 there
  *	is no overlap between TASK_* and EXIT_* but that may not always be
  *	true, so EXIT_* bits are shifted left 16 bits before being stored in
diff --git a/kernel/events/Makefile b/kernel/events/Makefile
new file mode 100644
index 00000000000..1ce23d3d839
--- /dev/null
+++ b/kernel/events/Makefile
@@ -0,0 +1,6 @@
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_core.o = -pg
+endif
+
+obj-y := core.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
diff --git a/kernel/perf_event.c b/kernel/events/core.c
index c75925c4d1e..c09767f7db3 100644
--- a/kernel/perf_event.c
+++ b/kernel/events/core.c
@@ -2,8 +2,8 @@
  * Performance events core code:
  *
  *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
  *  Copyright  ©  2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
  *
  * For licensing details see kernel-base/COPYING
@@ -39,10 +39,10 @@
 #include <asm/irq_regs.h>
 
 struct remote_function_call {
-	struct task_struct *p;
-	int (*func)(void *info);
-	void *info;
-	int ret;
+	struct task_struct	*p;
+	int			(*func)(void *info);
+	void			*info;
+	int			ret;
 };
 
 static void remote_function(void *data)
@@ -76,10 +76,10 @@ static int
 task_function_call(struct task_struct *p, int (*func) (void *info), void *info)
 {
 	struct remote_function_call data = {
-		.p = p,
-		.func = func,
-		.info = info,
-		.ret = -ESRCH, /* No such (running) process */
+		.p	= p,
+		.func	= func,
+		.info	= info,
+		.ret	= -ESRCH, /* No such (running) process */
 	};
 
 	if (task_curr(p))
@@ -100,10 +100,10 @@ task_function_call(struct task_struct *p, int (*func) (void *info), void *info)
 static int cpu_function_call(int cpu, int (*func) (void *info), void *info)
 {
 	struct remote_function_call data = {
-		.p = NULL,
-		.func = func,
-		.info = info,
-		.ret = -ENXIO, /* No such CPU */
+		.p	= NULL,
+		.func	= func,
+		.info	= info,
+		.ret	= -ENXIO, /* No such CPU */
 	};
 
 	smp_call_function_single(cpu, remote_function, &data, 1);
@@ -125,7 +125,7 @@ enum event_type_t {
  * perf_sched_events : >0 events exist
  * perf_cgroup_events: >0 per-cpu cgroup events exist on this cpu
  */
-atomic_t perf_sched_events __read_mostly;
+struct jump_label_key perf_sched_events __read_mostly;
 static DEFINE_PER_CPU(atomic_t, perf_cgroup_events);
 
 static atomic_t nr_mmap_events __read_mostly;
@@ -145,8 +145,8 @@ static struct srcu_struct pmus_srcu;
  */
 int sysctl_perf_event_paranoid __read_mostly = 1;
 
-/* Minimum for 128 pages + 1 for the user control page */
-int sysctl_perf_event_mlock __read_mostly = 516; /* 'free' kb per user */
+/* Minimum for 512 kiB + 1 user control page */
+int sysctl_perf_event_mlock __read_mostly = 512 + (PAGE_SIZE / 1024); /* 'free' kiB per user */
 
 /*
  * max perf event sample rate
@@ -364,6 +364,7 @@ void perf_cgroup_switch(struct task_struct *task, int mode)
 			}
 
 			if (mode & PERF_CGROUP_SWIN) {
+				WARN_ON_ONCE(cpuctx->cgrp);
 				/* set cgrp before ctxsw in to
 				 * allow event_filter_match() to not
 				 * have to pass task around
@@ -585,14 +586,6 @@ static void get_ctx(struct perf_event_context *ctx)
 	WARN_ON(!atomic_inc_not_zero(&ctx->refcount));
 }
 
-static void free_ctx(struct rcu_head *head)
-{
-	struct perf_event_context *ctx;
-
-	ctx = container_of(head, struct perf_event_context, rcu_head);
-	kfree(ctx);
-}
-
 static void put_ctx(struct perf_event_context *ctx)
 {
 	if (atomic_dec_and_test(&ctx->refcount)) {
@@ -600,7 +593,7 @@ static void put_ctx(struct perf_event_context *ctx)
 			put_ctx(ctx->parent_ctx);
 		if (ctx->task)
 			put_task_struct(ctx->task);
-		call_rcu(&ctx->rcu_head, free_ctx);
+		kfree_rcu(ctx, rcu_head);
 	}
 }
 
@@ -2423,6 +2416,14 @@ static void perf_event_enable_on_exec(struct perf_event_context *ctx)
 	if (!ctx || !ctx->nr_events)
 		goto out;
 
+	/*
+	 * We must ctxsw out cgroup events to avoid conflict
+	 * when invoking perf_task_event_sched_in() later on
+	 * in this function. Otherwise we end up trying to
+	 * ctxswin cgroup events which are already scheduled
+	 * in.
+	 */
+	perf_cgroup_sched_out(current);
 	task_ctx_sched_out(ctx, EVENT_ALL);
 
 	raw_spin_lock(&ctx->lock);
@@ -2447,6 +2448,9 @@ static void perf_event_enable_on_exec(struct perf_event_context *ctx)
 
 	raw_spin_unlock(&ctx->lock);
 
+	/*
+	 * Also calls ctxswin for cgroup events, if any:
+	 */
 	perf_event_context_sched_in(ctx, ctx->task);
 out:
 	local_irq_restore(flags);
@@ -5319,14 +5323,6 @@ swevent_hlist_deref(struct swevent_htable *swhash)
 					 lockdep_is_held(&swhash->hlist_mutex));
 }
 
-static void swevent_hlist_release_rcu(struct rcu_head *rcu_head)
-{
-	struct swevent_hlist *hlist;
-
-	hlist = container_of(rcu_head, struct swevent_hlist, rcu_head);
-	kfree(hlist);
-}
-
 static void swevent_hlist_release(struct swevent_htable *swhash)
 {
 	struct swevent_hlist *hlist = swevent_hlist_deref(swhash);
@@ -5335,7 +5331,7 @@ static void swevent_hlist_release(struct swevent_htable *swhash)
 		return;
 
 	rcu_assign_pointer(swhash->swevent_hlist, NULL);
-	call_rcu(&hlist->rcu_head, swevent_hlist_release_rcu);
+	kfree_rcu(hlist, rcu_head);
 }
 
 static void swevent_hlist_put_cpu(struct perf_event *event, int cpu)
@@ -5417,7 +5413,7 @@ fail:
 	return err;
 }
 
-atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
+struct jump_label_key perf_swevent_enabled[PERF_COUNT_SW_MAX];
 
 static void sw_perf_event_destroy(struct perf_event *event)
 {
@@ -6531,6 +6527,11 @@ SYSCALL_DEFINE5(perf_event_open,
 		goto err_alloc;
 	}
 
+	if (task) {
+		put_task_struct(task);
+		task = NULL;
+	}
+
 	/*
 	 * Look up the group leader (we will attach this event to it):
 	 */
@@ -7428,11 +7429,11 @@ static void perf_cgroup_exit(struct cgroup_subsys *ss, struct cgroup *cgrp,
 }
 
 struct cgroup_subsys perf_subsys = {
-	.name = "perf_event",
-	.subsys_id = perf_subsys_id,
-	.create = perf_cgroup_create,
-	.destroy = perf_cgroup_destroy,
-	.exit = perf_cgroup_exit,
-	.attach = perf_cgroup_attach,
+	.name		= "perf_event",
+	.subsys_id	= perf_subsys_id,
+	.create		= perf_cgroup_create,
+	.destroy	= perf_cgroup_destroy,
+	.exit		= perf_cgroup_exit,
+	.attach		= perf_cgroup_attach,
 };
 #endif /* CONFIG_CGROUP_PERF */
diff --git a/kernel/hw_breakpoint.c b/kernel/events/hw_breakpoint.c
index 086adf25a55..086adf25a55 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
diff --git a/kernel/exit.c b/kernel/exit.c
index 6a488ad2dce..20a40647152 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -841,7 +841,7 @@ static void exit_notify(struct task_struct *tsk, int group_dead)
 	/* Let father know we died
 	 *
 	 * Thread signals are configurable, but you aren't going to use
-	 * that to send signals to arbitary processes.
+	 * that to send signals to arbitrary processes.
 	 * That stops right now.
 	 *
 	 * If the parent exec id doesn't match the exec id we saved
@@ -1016,7 +1016,7 @@ NORET_TYPE void do_exit(long code)
 	/*
 	 * FIXME: do that only when needed, using sched_exit tracepoint
 	 */
-	flush_ptrace_hw_breakpoint(tsk);
+	ptrace_put_breakpoints(tsk);
 
 	exit_notify(tsk, group_dead);
 #ifdef CONFIG_NUMA
@@ -1377,11 +1377,23 @@ static int *task_stopped_code(struct task_struct *p, bool ptrace)
 	return NULL;
 }
 
-/*
- * Handle sys_wait4 work for one task in state TASK_STOPPED.  We hold
- * read_lock(&tasklist_lock) on entry.  If we return zero, we still hold
- * the lock and this task is uninteresting.  If we return nonzero, we have
- * released the lock and the system call should return.
+/**
+ * wait_task_stopped - Wait for %TASK_STOPPED or %TASK_TRACED
+ * @wo: wait options
+ * @ptrace: is the wait for ptrace
+ * @p: task to wait for
+ *
+ * Handle sys_wait4() work for %p in state %TASK_STOPPED or %TASK_TRACED.
+ *
+ * CONTEXT:
+ * read_lock(&tasklist_lock), which is released if return value is
+ * non-zero.  Also, grabs and releases @p->sighand->siglock.
+ *
+ * RETURNS:
+ * 0 if wait condition didn't exist and search for other wait conditions
+ * should continue.  Non-zero return, -errno on failure and @p's pid on
+ * success, implies that tasklist_lock is released and wait condition
+ * search should terminate.
  */
 static int wait_task_stopped(struct wait_opts *wo,
 				int ptrace, struct task_struct *p)
@@ -1397,6 +1409,9 @@ static int wait_task_stopped(struct wait_opts *wo,
 	if (!ptrace && !(wo->wo_flags & WUNTRACED))
 		return 0;
 
+	if (!task_stopped_code(p, ptrace))
+		return 0;
+
 	exit_code = 0;
 	spin_lock_irq(&p->sighand->siglock);
 
@@ -1538,33 +1553,84 @@ static int wait_consider_task(struct wait_opts *wo, int ptrace,
 		return 0;
 	}
 
-	if (likely(!ptrace) && unlikely(task_ptrace(p))) {
+	/* dead body doesn't have much to contribute */
+	if (p->exit_state == EXIT_DEAD)
+		return 0;
+
+	/* slay zombie? */
+	if (p->exit_state == EXIT_ZOMBIE) {
+		/*
+		 * A zombie ptracee is only visible to its ptracer.
+		 * Notification and reaping will be cascaded to the real
+		 * parent when the ptracer detaches.
+		 */
+		if (likely(!ptrace) && unlikely(task_ptrace(p))) {
+			/* it will become visible, clear notask_error */
+			wo->notask_error = 0;
+			return 0;
+		}
+
+		/* we don't reap group leaders with subthreads */
+		if (!delay_group_leader(p))
+			return wait_task_zombie(wo, p);
+
 		/*
-		 * This child is hidden by ptrace.
-		 * We aren't allowed to see it now, but eventually we will.
+		 * Allow access to stopped/continued state via zombie by
+		 * falling through.  Clearing of notask_error is complex.
+		 *
+		 * When !@ptrace:
+		 *
+		 * If WEXITED is set, notask_error should naturally be
+		 * cleared.  If not, subset of WSTOPPED|WCONTINUED is set,
+		 * so, if there are live subthreads, there are events to
+		 * wait for.  If all subthreads are dead, it's still safe
+		 * to clear - this function will be called again in finite
+		 * amount time once all the subthreads are released and
+		 * will then return without clearing.
+		 *
+		 * When @ptrace:
+		 *
+		 * Stopped state is per-task and thus can't change once the
+		 * target task dies.  Only continued and exited can happen.
+		 * Clear notask_error if WCONTINUED | WEXITED.
+		 */
+		if (likely(!ptrace) || (wo->wo_flags & (WCONTINUED | WEXITED)))
+			wo->notask_error = 0;
+	} else {
+		/*
+		 * If @p is ptraced by a task in its real parent's group,
+		 * hide group stop/continued state when looking at @p as
+		 * the real parent; otherwise, a single stop can be
+		 * reported twice as group and ptrace stops.
+		 *
+		 * If a ptracer wants to distinguish the two events for its
+		 * own children, it should create a separate process which
+		 * takes the role of real parent.
+		 */
+		if (likely(!ptrace) && task_ptrace(p) &&
+		    same_thread_group(p->parent, p->real_parent))
+			return 0;
+
+		/*
+		 * @p is alive and it's gonna stop, continue or exit, so
+		 * there always is something to wait for.
 		 */
 		wo->notask_error = 0;
-		return 0;
 	}
 
-	if (p->exit_state == EXIT_DEAD)
-		return 0;
-
 	/*
-	 * We don't reap group leaders with subthreads.
+	 * Wait for stopped.  Depending on @ptrace, different stopped state
+	 * is used and the two don't interact with each other.
 	 */
-	if (p->exit_state == EXIT_ZOMBIE && !delay_group_leader(p))
-		return wait_task_zombie(wo, p);
+	ret = wait_task_stopped(wo, ptrace, p);
+	if (ret)
+		return ret;
 
 	/*
-	 * It's stopped or running now, so it might
-	 * later continue, exit, or stop again.
+	 * Wait for continued.  There's only one continued state and the
+	 * ptracer can consume it which can confuse the real parent.  Don't
+	 * use WCONTINUED from ptracer.  You don't need or want it.
 	 */
-	wo->notask_error = 0;
-
-	if (task_stopped_code(p, ptrace))
-		return wait_task_stopped(wo, ptrace, p);
-
 	return wait_task_continued(wo, p);
 }
 
diff --git a/kernel/extable.c b/kernel/extable.c
index 7f8f263f852..5339705b824 100644
--- a/kernel/extable.c
+++ b/kernel/extable.c
@@ -72,6 +72,24 @@ int core_kernel_text(unsigned long addr)
 	return 0;
 }
 
+/**
+ * core_kernel_data - tell if addr points to kernel data
+ * @addr: address to test
+ *
+ * Returns true if @addr passed in is from the core kernel data
+ * section.
+ *
+ * Note: On some archs it may return true for core RODATA, and false
+ *  for others. But will always be true for core RW data.
+ */
+int core_kernel_data(unsigned long addr)
+{
+	if (addr >= (unsigned long)_sdata &&
+	    addr < (unsigned long)_edata)
+		return 1;
+	return 0;
+}
+
 int __kernel_text_address(unsigned long addr)
 {
 	if (core_kernel_text(addr))
diff --git a/kernel/fork.c b/kernel/fork.c
index e7548dee636..2b44d82b823 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1103,7 +1103,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 
 	posix_cpu_timers_init(p);
 
-	p->lock_depth = -1;		/* -1 = no lock */
 	do_posix_clock_monotonic_gettime(&p->start_time);
 	p->real_start_time = p->start_time;
 	monotonic_to_bootbased(&p->real_start_time);
@@ -1153,7 +1152,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 #endif
 
 	/* Perform scheduler related setup. Assign this task to a CPU. */
-	sched_fork(p, clone_flags);
+	sched_fork(p);
 
 	retval = perf_event_init_task(p);
 	if (retval)
@@ -1464,7 +1463,7 @@ long do_fork(unsigned long clone_flags,
 		 */
 		p->flags &= ~PF_STARTING;
 
-		wake_up_new_task(p, clone_flags);
+		wake_up_new_task(p);
 
 		tracehook_report_clone_complete(trace, regs,
 						clone_flags, nr, p);
diff --git a/kernel/freezer.c b/kernel/freezer.c
index 66ecd2ead21..7b01de98bb6 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -17,7 +17,7 @@ static inline void frozen_process(void)
 {
 	if (!unlikely(current->flags & PF_NOFREEZE)) {
 		current->flags |= PF_FROZEN;
-		wmb();
+		smp_wmb();
 	}
 	clear_freeze_flag(current);
 }
@@ -93,7 +93,7 @@ bool freeze_task(struct task_struct *p, bool sig_only)
 	 * the task as frozen and next clears its TIF_FREEZE.
 	 */
 	if (!freezing(p)) {
-		rmb();
+		smp_rmb();
 		if (frozen(p))
 			return false;
 
diff --git a/kernel/futex.c b/kernel/futex.c
index dfb924ffe65..fe28dc282ea 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1886,7 +1886,7 @@ retry:
 	restart->futex.val = val;
 	restart->futex.time = abs_time->tv64;
 	restart->futex.bitset = bitset;
-	restart->futex.flags = flags;
+	restart->futex.flags = flags | FLAGS_HAS_TIMEOUT;
 
 	ret = -ERESTART_RESTARTBLOCK;
 
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 9017478c5d4..dbbbf7d4308 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -81,7 +81,11 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
 	}
 };
 
-static int hrtimer_clock_to_base_table[MAX_CLOCKS];
+static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
+	[CLOCK_REALTIME]	= HRTIMER_BASE_REALTIME,
+	[CLOCK_MONOTONIC]	= HRTIMER_BASE_MONOTONIC,
+	[CLOCK_BOOTTIME]	= HRTIMER_BASE_BOOTTIME,
+};
 
 static inline int hrtimer_clockid_to_base(clockid_t clock_id)
 {
@@ -1722,10 +1726,6 @@ static struct notifier_block __cpuinitdata hrtimers_nb = {
 
 void __init hrtimers_init(void)
 {
-	hrtimer_clock_to_base_table[CLOCK_REALTIME] = HRTIMER_BASE_REALTIME;
-	hrtimer_clock_to_base_table[CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC;
-	hrtimer_clock_to_base_table[CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME;
-
 	hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE,
 			  (void *)(long)smp_processor_id());
 	register_cpu_notifier(&hrtimers_nb);
diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index 53ead174da2..ea640120ab8 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -33,7 +33,7 @@ unsigned long __read_mostly sysctl_hung_task_check_count = PID_MAX_LIMIT;
 /*
  * Zero means infinite timeout - no checking done:
  */
-unsigned long __read_mostly sysctl_hung_task_timeout_secs = 120;
+unsigned long __read_mostly sysctl_hung_task_timeout_secs = CONFIG_DEFAULT_HUNG_TASK_TIMEOUT;
 
 unsigned long __read_mostly sysctl_hung_task_warnings = 10;
 
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index a69c333f78e..d1d051b38e0 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -10,9 +10,6 @@ menu "IRQ subsystem"
 config GENERIC_HARDIRQS
        def_bool y
 
-config GENERIC_HARDIRQS_NO_COMPAT
-       bool
-
 # Options selectable by the architecture code
 
 # Make sparse irq Kconfig switch below available
@@ -51,6 +48,10 @@ config IRQ_PREFLOW_FASTEOI
 config IRQ_EDGE_EOI_HANDLER
        bool
 
+# Generic configurable interrupt chip implementation
+config GENERIC_IRQ_CHIP
+       bool
+
 # Support forced irq threading
 config IRQ_FORCED_THREADING
        bool
diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
index 54329cd7b3e..73290056cfb 100644
--- a/kernel/irq/Makefile
+++ b/kernel/irq/Makefile
@@ -1,5 +1,6 @@
 
 obj-y := irqdesc.o handle.o manage.o spurious.o resend.o chip.o dummychip.o devres.o
+obj-$(CONFIG_GENERIC_IRQ_CHIP) += generic-chip.o
 obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 616ec1c6b06..d5a3009da71 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -310,6 +310,7 @@ handle_simple_irq(unsigned int irq, struct irq_desc *desc)
 out_unlock:
 	raw_spin_unlock(&desc->lock);
 }
+EXPORT_SYMBOL_GPL(handle_simple_irq);
 
 /**
  *	handle_level_irq - Level type irq handler
@@ -415,7 +416,7 @@ out:
  *	@desc:	the interrupt description structure for this irq
  *
  *	Interrupt occures on the falling and/or rising edge of a hardware
- *	signal. The occurence is latched into the irq controller hardware
+ *	signal. The occurrence is latched into the irq controller hardware
  *	and must be acked in order to be reenabled. After the ack another
  *	interrupt can happen on the same source even before the first one
  *	is handled by the associated event handler. If this happens it
@@ -514,7 +515,7 @@ void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc)
 	} while ((desc->istate & IRQS_PENDING) &&
 		 !irqd_irq_disabled(&desc->irq_data));
 
-out_unlock:
+out_eoi:
 	chip->irq_eoi(&desc->irq_data);
 	raw_spin_unlock(&desc->lock);
 }
@@ -573,6 +574,7 @@ __irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
 	if (handle != handle_bad_irq && is_chained) {
 		irq_settings_set_noprobe(desc);
 		irq_settings_set_norequest(desc);
+		irq_settings_set_nothread(desc);
 		irq_startup(desc);
 	}
 out:
@@ -612,6 +614,7 @@ void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set)
 
 	irq_put_desc_unlock(desc, flags);
 }
+EXPORT_SYMBOL_GPL(irq_modify_status);
 
 /**
  *	irq_cpu_online - Invoke all irq_cpu_online functions.
diff --git a/kernel/irq/debug.h b/kernel/irq/debug.h
index 306cba37e9a..97a8bfadc88 100644
--- a/kernel/irq/debug.h
+++ b/kernel/irq/debug.h
@@ -27,6 +27,7 @@ static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc)
 	P(IRQ_PER_CPU);
 	P(IRQ_NOPROBE);
 	P(IRQ_NOREQUEST);
+	P(IRQ_NOTHREAD);
 	P(IRQ_NOAUTOEN);
 
 	PS(IRQS_AUTODETECT);
diff --git a/kernel/irq/generic-chip.c b/kernel/irq/generic-chip.c
new file mode 100644
index 00000000000..31a9db71190
--- /dev/null
+++ b/kernel/irq/generic-chip.c
@@ -0,0 +1,354 @@
+/*
+ * Library implementing the most common irq chip callback functions
+ *
+ * Copyright (C) 2011, Thomas Gleixner
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/syscore_ops.h>
+
+#include "internals.h"
+
+static LIST_HEAD(gc_list);
+static DEFINE_RAW_SPINLOCK(gc_lock);
+
+static inline struct irq_chip_regs *cur_regs(struct irq_data *d)
+{
+	return &container_of(d->chip, struct irq_chip_type, chip)->regs;
+}
+
+/**
+ * irq_gc_noop - NOOP function
+ * @d: irq_data
+ */
+void irq_gc_noop(struct irq_data *d)
+{
+}
+
+/**
+ * irq_gc_mask_disable_reg - Mask chip via disable register
+ * @d: irq_data
+ *
+ * Chip has separate enable/disable registers instead of a single mask
+ * register.
+ */
+void irq_gc_mask_disable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - gc->irq_base);
+
+	irq_gc_lock(gc);
+	irq_reg_writel(mask, gc->reg_base + cur_regs(d)->disable);
+	gc->mask_cache &= ~mask;
+	irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_mask_set_mask_bit - Mask chip via setting bit in mask register
+ * @d: irq_data
+ *
+ * Chip has a single mask register. Values of this register are cached
+ * and protected by gc->lock
+ */
+void irq_gc_mask_set_bit(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - gc->irq_base);
+
+	irq_gc_lock(gc);
+	gc->mask_cache |= mask;
+	irq_reg_writel(gc->mask_cache, gc->reg_base + cur_regs(d)->mask);
+	irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_mask_set_mask_bit - Mask chip via clearing bit in mask register
+ * @d: irq_data
+ *
+ * Chip has a single mask register. Values of this register are cached
+ * and protected by gc->lock
+ */
+void irq_gc_mask_clr_bit(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - gc->irq_base);
+
+	irq_gc_lock(gc);
+	gc->mask_cache &= ~mask;
+	irq_reg_writel(gc->mask_cache, gc->reg_base + cur_regs(d)->mask);
+	irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_unmask_enable_reg - Unmask chip via enable register
+ * @d: irq_data
+ *
+ * Chip has separate enable/disable registers instead of a single mask
+ * register.
+ */
+void irq_gc_unmask_enable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - gc->irq_base);
+
+	irq_gc_lock(gc);
+	irq_reg_writel(mask, gc->reg_base + cur_regs(d)->enable);
+	gc->mask_cache |= mask;
+	irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_ack - Ack pending interrupt
+ * @d: irq_data
+ */
+void irq_gc_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - gc->irq_base);
+
+	irq_gc_lock(gc);
+	irq_reg_writel(mask, gc->reg_base + cur_regs(d)->ack);
+	irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_mask_disable_reg_and_ack- Mask and ack pending interrupt
+ * @d: irq_data
+ */
+void irq_gc_mask_disable_reg_and_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - gc->irq_base);
+
+	irq_gc_lock(gc);
+	irq_reg_writel(mask, gc->reg_base + cur_regs(d)->mask);
+	irq_reg_writel(mask, gc->reg_base + cur_regs(d)->ack);
+	irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_eoi - EOI interrupt
+ * @d: irq_data
+ */
+void irq_gc_eoi(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - gc->irq_base);
+
+	irq_gc_lock(gc);
+	irq_reg_writel(mask, gc->reg_base + cur_regs(d)->eoi);
+	irq_gc_unlock(gc);
+}
+
+/**
+ * irq_gc_set_wake - Set/clr wake bit for an interrupt
+ * @d: irq_data
+ *
+ * For chips where the wake from suspend functionality is not
+ * configured in a separate register and the wakeup active state is
+ * just stored in a bitmask.
+ */
+int irq_gc_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - gc->irq_base);
+
+	if (!(mask & gc->wake_enabled))
+		return -EINVAL;
+
+	irq_gc_lock(gc);
+	if (on)
+		gc->wake_active |= mask;
+	else
+		gc->wake_active &= ~mask;
+	irq_gc_unlock(gc);
+	return 0;
+}
+
+/**
+ * irq_alloc_generic_chip - Allocate a generic chip and initialize it
+ * @name:	Name of the irq chip
+ * @num_ct:	Number of irq_chip_type instances associated with this
+ * @irq_base:	Interrupt base nr for this chip
+ * @reg_base:	Register base address (virtual)
+ * @handler:	Default flow handler associated with this chip
+ *
+ * Returns an initialized irq_chip_generic structure. The chip defaults
+ * to the primary (index 0) irq_chip_type and @handler
+ */
+struct irq_chip_generic *
+irq_alloc_generic_chip(const char *name, int num_ct, unsigned int irq_base,
+		       void __iomem *reg_base, irq_flow_handler_t handler)
+{
+	struct irq_chip_generic *gc;
+	unsigned long sz = sizeof(*gc) + num_ct * sizeof(struct irq_chip_type);
+
+	gc = kzalloc(sz, GFP_KERNEL);
+	if (gc) {
+		raw_spin_lock_init(&gc->lock);
+		gc->num_ct = num_ct;
+		gc->irq_base = irq_base;
+		gc->reg_base = reg_base;
+		gc->chip_types->chip.name = name;
+		gc->chip_types->handler = handler;
+	}
+	return gc;
+}
+
+/*
+ * Separate lockdep class for interrupt chip which can nest irq_desc
+ * lock.
+ */
+static struct lock_class_key irq_nested_lock_class;
+
+/**
+ * irq_setup_generic_chip - Setup a range of interrupts with a generic chip
+ * @gc:		Generic irq chip holding all data
+ * @msk:	Bitmask holding the irqs to initialize relative to gc->irq_base
+ * @flags:	Flags for initialization
+ * @clr:	IRQ_* bits to clear
+ * @set:	IRQ_* bits to set
+ *
+ * Set up max. 32 interrupts starting from gc->irq_base. Note, this
+ * initializes all interrupts to the primary irq_chip_type and its
+ * associated handler.
+ */
+void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk,
+			    enum irq_gc_flags flags, unsigned int clr,
+			    unsigned int set)
+{
+	struct irq_chip_type *ct = gc->chip_types;
+	unsigned int i;
+
+	raw_spin_lock(&gc_lock);
+	list_add_tail(&gc->list, &gc_list);
+	raw_spin_unlock(&gc_lock);
+
+	/* Init mask cache ? */
+	if (flags & IRQ_GC_INIT_MASK_CACHE)
+		gc->mask_cache = irq_reg_readl(gc->reg_base + ct->regs.mask);
+
+	for (i = gc->irq_base; msk; msk >>= 1, i++) {
+		if (!msk & 0x01)
+			continue;
+
+		if (flags & IRQ_GC_INIT_NESTED_LOCK)
+			irq_set_lockdep_class(i, &irq_nested_lock_class);
+
+		irq_set_chip_and_handler(i, &ct->chip, ct->handler);
+		irq_set_chip_data(i, gc);
+		irq_modify_status(i, clr, set);
+	}
+	gc->irq_cnt = i - gc->irq_base;
+}
+
+/**
+ * irq_setup_alt_chip - Switch to alternative chip
+ * @d:		irq_data for this interrupt
+ * @type	Flow type to be initialized
+ *
+ * Only to be called from chip->irq_set_type() callbacks.
+ */
+int irq_setup_alt_chip(struct irq_data *d, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = gc->chip_types;
+	unsigned int i;
+
+	for (i = 0; i < gc->num_ct; i++, ct++) {
+		if (ct->type & type) {
+			d->chip = &ct->chip;
+			irq_data_to_desc(d)->handle_irq = ct->handler;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+/**
+ * irq_remove_generic_chip - Remove a chip
+ * @gc:		Generic irq chip holding all data
+ * @msk:	Bitmask holding the irqs to initialize relative to gc->irq_base
+ * @clr:	IRQ_* bits to clear
+ * @set:	IRQ_* bits to set
+ *
+ * Remove up to 32 interrupts starting from gc->irq_base.
+ */
+void irq_remove_generic_chip(struct irq_chip_generic *gc, u32 msk,
+			     unsigned int clr, unsigned int set)
+{
+	unsigned int i = gc->irq_base;
+
+	raw_spin_lock(&gc_lock);
+	list_del(&gc->list);
+	raw_spin_unlock(&gc_lock);
+
+	for (; msk; msk >>= 1, i++) {
+		if (!msk & 0x01)
+			continue;
+
+		/* Remove handler first. That will mask the irq line */
+		irq_set_handler(i, NULL);
+		irq_set_chip(i, &no_irq_chip);
+		irq_set_chip_data(i, NULL);
+		irq_modify_status(i, clr, set);
+	}
+}
+
+#ifdef CONFIG_PM
+static int irq_gc_suspend(void)
+{
+	struct irq_chip_generic *gc;
+
+	list_for_each_entry(gc, &gc_list, list) {
+		struct irq_chip_type *ct = gc->chip_types;
+
+		if (ct->chip.irq_suspend)
+			ct->chip.irq_suspend(irq_get_irq_data(gc->irq_base));
+	}
+	return 0;
+}
+
+static void irq_gc_resume(void)
+{
+	struct irq_chip_generic *gc;
+
+	list_for_each_entry(gc, &gc_list, list) {
+		struct irq_chip_type *ct = gc->chip_types;
+
+		if (ct->chip.irq_resume)
+			ct->chip.irq_resume(irq_get_irq_data(gc->irq_base));
+	}
+}
+#else
+#define irq_gc_suspend NULL
+#define irq_gc_resume NULL
+#endif
+
+static void irq_gc_shutdown(void)
+{
+	struct irq_chip_generic *gc;
+
+	list_for_each_entry(gc, &gc_list, list) {
+		struct irq_chip_type *ct = gc->chip_types;
+
+		if (ct->chip.irq_pm_shutdown)
+			ct->chip.irq_pm_shutdown(irq_get_irq_data(gc->irq_base));
+	}
+}
+
+static struct syscore_ops irq_gc_syscore_ops = {
+	.suspend = irq_gc_suspend,
+	.resume = irq_gc_resume,
+	.shutdown = irq_gc_shutdown,
+};
+
+static int __init irq_gc_init_ops(void)
+{
+	register_syscore_ops(&irq_gc_syscore_ops);
+	return 0;
+}
+device_initcall(irq_gc_init_ops);
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 2c039c9b938..886e80347b3 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -22,7 +22,7 @@
  */
 static struct lock_class_key irq_desc_lock_class;
 
-#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+#if defined(CONFIG_SMP)
 static void __init init_irq_default_affinity(void)
 {
 	alloc_cpumask_var(&irq_default_affinity, GFP_NOWAIT);
@@ -290,6 +290,22 @@ static int irq_expand_nr_irqs(unsigned int nr)
 
 #endif /* !CONFIG_SPARSE_IRQ */
 
+/**
+ * generic_handle_irq - Invoke the handler for a particular irq
+ * @irq:	The irq number to handle
+ *
+ */
+int generic_handle_irq(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	if (!desc)
+		return -EINVAL;
+	generic_handle_irq_desc(irq, desc);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(generic_handle_irq);
+
 /* Dynamic interrupt handling */
 
 /**
@@ -311,6 +327,7 @@ void irq_free_descs(unsigned int from, unsigned int cnt)
 	bitmap_clear(allocated_irqs, from, cnt);
 	mutex_unlock(&sparse_irq_lock);
 }
+EXPORT_SYMBOL_GPL(irq_free_descs);
 
 /**
  * irq_alloc_descs - allocate and initialize a range of irq descriptors
@@ -351,6 +368,7 @@ err:
 	mutex_unlock(&sparse_irq_lock);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(irq_alloc_descs);
 
 /**
  * irq_reserve_irqs - mark irqs allocated
@@ -430,7 +448,6 @@ unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
 			*per_cpu_ptr(desc->kstat_irqs, cpu) : 0;
 }
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 unsigned int kstat_irqs(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
@@ -443,4 +460,3 @@ unsigned int kstat_irqs(unsigned int irq)
 		sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
 	return sum;
 }
-#endif /* CONFIG_GENERIC_HARDIRQS */
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 12a80fdae11..f7ce0021e1c 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -900,7 +900,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 		 */
 		new->handler = irq_nested_primary_handler;
 	} else {
-		irq_setup_forced_threading(new);
+		if (irq_settings_can_thread(desc))
+			irq_setup_forced_threading(new);
 	}
 
 	/*
@@ -1051,6 +1052,7 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
 	register_irq_proc(irq, desc);
 	new->dir = NULL;
 	register_handler_proc(irq, new);
+	free_cpumask_var(mask);
 
 	return 0;
 
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index bc6194698df..47420908fba 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -35,7 +35,7 @@ void irq_move_masked_irq(struct irq_data *idata)
 	 * do the disable, re-program, enable sequence.
 	 * This is *not* particularly important for level triggered
 	 * but in a edge trigger case, we might be setting rte
-	 * when an active trigger is comming in. This could
+	 * when an active trigger is coming in. This could
 	 * cause some ioapics to mal-function.
 	 * Being paranoid i guess!
 	 *
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index dd201bd3510..834899f2500 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -419,7 +419,7 @@ int show_interrupts(struct seq_file *p, void *v)
 	} else {
 		seq_printf(p, " %8s", "None");
 	}
-#ifdef CONFIG_GENIRC_IRQ_SHOW_LEVEL
+#ifdef CONFIG_GENERIC_IRQ_SHOW_LEVEL
 	seq_printf(p, " %-8s", irqd_is_level_type(&desc->irq_data) ? "Level" : "Edge");
 #endif
 	if (desc->name)
diff --git a/kernel/irq/settings.h b/kernel/irq/settings.h
index 0d91730b633..f1667833d44 100644
--- a/kernel/irq/settings.h
+++ b/kernel/irq/settings.h
@@ -8,6 +8,7 @@ enum {
 	_IRQ_LEVEL		= IRQ_LEVEL,
 	_IRQ_NOPROBE		= IRQ_NOPROBE,
 	_IRQ_NOREQUEST		= IRQ_NOREQUEST,
+	_IRQ_NOTHREAD		= IRQ_NOTHREAD,
 	_IRQ_NOAUTOEN		= IRQ_NOAUTOEN,
 	_IRQ_MOVE_PCNTXT	= IRQ_MOVE_PCNTXT,
 	_IRQ_NO_BALANCING	= IRQ_NO_BALANCING,
@@ -20,6 +21,7 @@ enum {
 #define IRQ_LEVEL		GOT_YOU_MORON
 #define IRQ_NOPROBE		GOT_YOU_MORON
 #define IRQ_NOREQUEST		GOT_YOU_MORON
+#define IRQ_NOTHREAD		GOT_YOU_MORON
 #define IRQ_NOAUTOEN		GOT_YOU_MORON
 #define IRQ_NESTED_THREAD	GOT_YOU_MORON
 #undef IRQF_MODIFY_MASK
@@ -94,6 +96,21 @@ static inline void irq_settings_set_norequest(struct irq_desc *desc)
 	desc->status_use_accessors |= _IRQ_NOREQUEST;
 }
 
+static inline bool irq_settings_can_thread(struct irq_desc *desc)
+{
+	return !(desc->status_use_accessors & _IRQ_NOTHREAD);
+}
+
+static inline void irq_settings_clr_nothread(struct irq_desc *desc)
+{
+	desc->status_use_accessors &= ~_IRQ_NOTHREAD;
+}
+
+static inline void irq_settings_set_nothread(struct irq_desc *desc)
+{
+	desc->status_use_accessors |= _IRQ_NOTHREAD;
+}
+
 static inline bool irq_settings_can_probe(struct irq_desc *desc)
 {
 	return !(desc->status_use_accessors & _IRQ_NOPROBE);
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 3b79bd93833..74d1c099fbd 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -2,43 +2,23 @@
  * jump label support
  *
  * Copyright (C) 2009 Jason Baron <jbaron@redhat.com>
+ * Copyright (C) 2011 Peter Zijlstra <pzijlstr@redhat.com>
  *
  */
-#include <linux/jump_label.h>
 #include <linux/memory.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
 #include <linux/list.h>
-#include <linux/jhash.h>
 #include <linux/slab.h>
 #include <linux/sort.h>
 #include <linux/err.h>
+#include <linux/jump_label.h>
 
 #ifdef HAVE_JUMP_LABEL
 
-#define JUMP_LABEL_HASH_BITS 6
-#define JUMP_LABEL_TABLE_SIZE (1 << JUMP_LABEL_HASH_BITS)
-static struct hlist_head jump_label_table[JUMP_LABEL_TABLE_SIZE];
-
 /* mutex to protect coming/going of the the jump_label table */
 static DEFINE_MUTEX(jump_label_mutex);
 
-struct jump_label_entry {
-	struct hlist_node hlist;
-	struct jump_entry *table;
-	int nr_entries;
-	/* hang modules off here */
-	struct hlist_head modules;
-	unsigned long key;
-};
-
-struct jump_label_module_entry {
-	struct hlist_node hlist;
-	struct jump_entry *table;
-	int nr_entries;
-	struct module *mod;
-};
-
 void jump_label_lock(void)
 {
 	mutex_lock(&jump_label_mutex);
@@ -49,6 +29,11 @@ void jump_label_unlock(void)
 	mutex_unlock(&jump_label_mutex);
 }
 
+bool jump_label_enabled(struct jump_label_key *key)
+{
+	return !!atomic_read(&key->enabled);
+}
+
 static int jump_label_cmp(const void *a, const void *b)
 {
 	const struct jump_entry *jea = a;
@@ -64,7 +49,7 @@ static int jump_label_cmp(const void *a, const void *b)
 }
 
 static void
-sort_jump_label_entries(struct jump_entry *start, struct jump_entry *stop)
+jump_label_sort_entries(struct jump_entry *start, struct jump_entry *stop)
 {
 	unsigned long size;
 
@@ -73,118 +58,25 @@ sort_jump_label_entries(struct jump_entry *start, struct jump_entry *stop)
 	sort(start, size, sizeof(struct jump_entry), jump_label_cmp, NULL);
 }
 
-static struct jump_label_entry *get_jump_label_entry(jump_label_t key)
-{
-	struct hlist_head *head;
-	struct hlist_node *node;
-	struct jump_label_entry *e;
-	u32 hash = jhash((void *)&key, sizeof(jump_label_t), 0);
-
-	head = &jump_label_table[hash & (JUMP_LABEL_TABLE_SIZE - 1)];
-	hlist_for_each_entry(e, node, head, hlist) {
-		if (key == e->key)
-			return e;
-	}
-	return NULL;
-}
+static void jump_label_update(struct jump_label_key *key, int enable);
 
-static struct jump_label_entry *
-add_jump_label_entry(jump_label_t key, int nr_entries, struct jump_entry *table)
+void jump_label_inc(struct jump_label_key *key)
 {
-	struct hlist_head *head;
-	struct jump_label_entry *e;
-	u32 hash;
-
-	e = get_jump_label_entry(key);
-	if (e)
-		return ERR_PTR(-EEXIST);
-
-	e = kmalloc(sizeof(struct jump_label_entry), GFP_KERNEL);
-	if (!e)
-		return ERR_PTR(-ENOMEM);
-
-	hash = jhash((void *)&key, sizeof(jump_label_t), 0);
-	head = &jump_label_table[hash & (JUMP_LABEL_TABLE_SIZE - 1)];
-	e->key = key;
-	e->table = table;
-	e->nr_entries = nr_entries;
-	INIT_HLIST_HEAD(&(e->modules));
-	hlist_add_head(&e->hlist, head);
-	return e;
-}
+	if (atomic_inc_not_zero(&key->enabled))
+		return;
 
-static int
-build_jump_label_hashtable(struct jump_entry *start, struct jump_entry *stop)
-{
-	struct jump_entry *iter, *iter_begin;
-	struct jump_label_entry *entry;
-	int count;
-
-	sort_jump_label_entries(start, stop);
-	iter = start;
-	while (iter < stop) {
-		entry = get_jump_label_entry(iter->key);
-		if (!entry) {
-			iter_begin = iter;
-			count = 0;
-			while ((iter < stop) &&
-				(iter->key == iter_begin->key)) {
-				iter++;
-				count++;
-			}
-			entry = add_jump_label_entry(iter_begin->key,
-							count, iter_begin);
-			if (IS_ERR(entry))
-				return PTR_ERR(entry);
-		 } else {
-			WARN_ONCE(1, KERN_ERR "build_jump_hashtable: unexpected entry!\n");
-			return -1;
-		}
-	}
-	return 0;
+	jump_label_lock();
+	if (atomic_add_return(1, &key->enabled) == 1)
+		jump_label_update(key, JUMP_LABEL_ENABLE);
+	jump_label_unlock();
 }
 
-/***
- * jump_label_update - update jump label text
- * @key -  key value associated with a a jump label
- * @type - enum set to JUMP_LABEL_ENABLE or JUMP_LABEL_DISABLE
- *
- * Will enable/disable the jump for jump label @key, depending on the
- * value of @type.
- *
- */
-
-void jump_label_update(unsigned long key, enum jump_label_type type)
+void jump_label_dec(struct jump_label_key *key)
 {
-	struct jump_entry *iter;
-	struct jump_label_entry *entry;
-	struct hlist_node *module_node;
-	struct jump_label_module_entry *e_module;
-	int count;
+	if (!atomic_dec_and_mutex_lock(&key->enabled, &jump_label_mutex))
+		return;
 
-	jump_label_lock();
-	entry = get_jump_label_entry((jump_label_t)key);
-	if (entry) {
-		count = entry->nr_entries;
-		iter = entry->table;
-		while (count--) {
-			if (kernel_text_address(iter->code))
-				arch_jump_label_transform(iter, type);
-			iter++;
-		}
-		/* eanble/disable jump labels in modules */
-		hlist_for_each_entry(e_module, module_node, &(entry->modules),
-							hlist) {
-			count = e_module->nr_entries;
-			iter = e_module->table;
-			while (count--) {
-				if (iter->key &&
-						kernel_text_address(iter->code))
-					arch_jump_label_transform(iter, type);
-				iter++;
-			}
-		}
-	}
+	jump_label_update(key, JUMP_LABEL_DISABLE);
 	jump_label_unlock();
 }
 
@@ -197,77 +89,33 @@ static int addr_conflict(struct jump_entry *entry, void *start, void *end)
 	return 0;
 }
 
-#ifdef CONFIG_MODULES
-
-static int module_conflict(void *start, void *end)
+static int __jump_label_text_reserved(struct jump_entry *iter_start,
+		struct jump_entry *iter_stop, void *start, void *end)
 {
-	struct hlist_head *head;
-	struct hlist_node *node, *node_next, *module_node, *module_node_next;
-	struct jump_label_entry *e;
-	struct jump_label_module_entry *e_module;
 	struct jump_entry *iter;
-	int i, count;
-	int conflict = 0;
-
-	for (i = 0; i < JUMP_LABEL_TABLE_SIZE; i++) {
-		head = &jump_label_table[i];
-		hlist_for_each_entry_safe(e, node, node_next, head, hlist) {
-			hlist_for_each_entry_safe(e_module, module_node,
-							module_node_next,
-							&(e->modules), hlist) {
-				count = e_module->nr_entries;
-				iter = e_module->table;
-				while (count--) {
-					if (addr_conflict(iter, start, end)) {
-						conflict = 1;
-						goto out;
-					}
-					iter++;
-				}
-			}
-		}
-	}
-out:
-	return conflict;
-}
-
-#endif
-
-/***
- * jump_label_text_reserved - check if addr range is reserved
- * @start: start text addr
- * @end: end text addr
- *
- * checks if the text addr located between @start and @end
- * overlaps with any of the jump label patch addresses. Code
- * that wants to modify kernel text should first verify that
- * it does not overlap with any of the jump label addresses.
- * Caller must hold jump_label_mutex.
- *
- * returns 1 if there is an overlap, 0 otherwise
- */
-int jump_label_text_reserved(void *start, void *end)
-{
-	struct jump_entry *iter;
-	struct jump_entry *iter_start = __start___jump_table;
-	struct jump_entry *iter_stop = __start___jump_table;
-	int conflict = 0;
 
 	iter = iter_start;
 	while (iter < iter_stop) {
-		if (addr_conflict(iter, start, end)) {
-			conflict = 1;
-			goto out;
-		}
+		if (addr_conflict(iter, start, end))
+			return 1;
 		iter++;
 	}
 
-	/* now check modules */
-#ifdef CONFIG_MODULES
-	conflict = module_conflict(start, end);
-#endif
-out:
-	return conflict;
+	return 0;
+}
+
+static void __jump_label_update(struct jump_label_key *key,
+		struct jump_entry *entry, int enable)
+{
+	for (; entry->key == (jump_label_t)(unsigned long)key; entry++) {
+		/*
+		 * entry->code set to 0 invalidates module init text sections
+		 * kernel_text_address() verifies we are not in core kernel
+		 * init code, see jump_label_invalidate_module_init().
+		 */
+		if (entry->code && kernel_text_address(entry->code))
+			arch_jump_label_transform(entry, enable);
+	}
 }
 
 /*
@@ -277,142 +125,173 @@ void __weak arch_jump_label_text_poke_early(jump_label_t addr)
 {
 }
 
-static __init int init_jump_label(void)
+static __init int jump_label_init(void)
 {
-	int ret;
 	struct jump_entry *iter_start = __start___jump_table;
 	struct jump_entry *iter_stop = __stop___jump_table;
+	struct jump_label_key *key = NULL;
 	struct jump_entry *iter;
 
 	jump_label_lock();
-	ret = build_jump_label_hashtable(__start___jump_table,
-					 __stop___jump_table);
-	iter = iter_start;
-	while (iter < iter_stop) {
+	jump_label_sort_entries(iter_start, iter_stop);
+
+	for (iter = iter_start; iter < iter_stop; iter++) {
 		arch_jump_label_text_poke_early(iter->code);
-		iter++;
+		if (iter->key == (jump_label_t)(unsigned long)key)
+			continue;
+
+		key = (struct jump_label_key *)(unsigned long)iter->key;
+		atomic_set(&key->enabled, 0);
+		key->entries = iter;
+#ifdef CONFIG_MODULES
+		key->next = NULL;
+#endif
 	}
 	jump_label_unlock();
-	return ret;
+
+	return 0;
 }
-early_initcall(init_jump_label);
+early_initcall(jump_label_init);
 
 #ifdef CONFIG_MODULES
 
-static struct jump_label_module_entry *
-add_jump_label_module_entry(struct jump_label_entry *entry,
-			    struct jump_entry *iter_begin,
-			    int count, struct module *mod)
+struct jump_label_mod {
+	struct jump_label_mod *next;
+	struct jump_entry *entries;
+	struct module *mod;
+};
+
+static int __jump_label_mod_text_reserved(void *start, void *end)
+{
+	struct module *mod;
+
+	mod = __module_text_address((unsigned long)start);
+	if (!mod)
+		return 0;
+
+	WARN_ON_ONCE(__module_text_address((unsigned long)end) != mod);
+
+	return __jump_label_text_reserved(mod->jump_entries,
+				mod->jump_entries + mod->num_jump_entries,
+				start, end);
+}
+
+static void __jump_label_mod_update(struct jump_label_key *key, int enable)
+{
+	struct jump_label_mod *mod = key->next;
+
+	while (mod) {
+		__jump_label_update(key, mod->entries, enable);
+		mod = mod->next;
+	}
+}
+
+/***
+ * apply_jump_label_nops - patch module jump labels with arch_get_jump_label_nop()
+ * @mod: module to patch
+ *
+ * Allow for run-time selection of the optimal nops. Before the module
+ * loads patch these with arch_get_jump_label_nop(), which is specified by
+ * the arch specific jump label code.
+ */
+void jump_label_apply_nops(struct module *mod)
 {
-	struct jump_label_module_entry *e;
-
-	e = kmalloc(sizeof(struct jump_label_module_entry), GFP_KERNEL);
-	if (!e)
-		return ERR_PTR(-ENOMEM);
-	e->mod = mod;
-	e->nr_entries = count;
-	e->table = iter_begin;
-	hlist_add_head(&e->hlist, &entry->modules);
-	return e;
+	struct jump_entry *iter_start = mod->jump_entries;
+	struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
+	struct jump_entry *iter;
+
+	/* if the module doesn't have jump label entries, just return */
+	if (iter_start == iter_stop)
+		return;
+
+	for (iter = iter_start; iter < iter_stop; iter++)
+		arch_jump_label_text_poke_early(iter->code);
 }
 
-static int add_jump_label_module(struct module *mod)
+static int jump_label_add_module(struct module *mod)
 {
-	struct jump_entry *iter, *iter_begin;
-	struct jump_label_entry *entry;
-	struct jump_label_module_entry *module_entry;
-	int count;
+	struct jump_entry *iter_start = mod->jump_entries;
+	struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
+	struct jump_entry *iter;
+	struct jump_label_key *key = NULL;
+	struct jump_label_mod *jlm;
 
 	/* if the module doesn't have jump label entries, just return */
-	if (!mod->num_jump_entries)
+	if (iter_start == iter_stop)
 		return 0;
 
-	sort_jump_label_entries(mod->jump_entries,
-				mod->jump_entries + mod->num_jump_entries);
-	iter = mod->jump_entries;
-	while (iter < mod->jump_entries + mod->num_jump_entries) {
-		entry = get_jump_label_entry(iter->key);
-		iter_begin = iter;
-		count = 0;
-		while ((iter < mod->jump_entries + mod->num_jump_entries) &&
-			(iter->key == iter_begin->key)) {
-				iter++;
-				count++;
-		}
-		if (!entry) {
-			entry = add_jump_label_entry(iter_begin->key, 0, NULL);
-			if (IS_ERR(entry))
-				return PTR_ERR(entry);
+	jump_label_sort_entries(iter_start, iter_stop);
+
+	for (iter = iter_start; iter < iter_stop; iter++) {
+		if (iter->key == (jump_label_t)(unsigned long)key)
+			continue;
+
+		key = (struct jump_label_key *)(unsigned long)iter->key;
+
+		if (__module_address(iter->key) == mod) {
+			atomic_set(&key->enabled, 0);
+			key->entries = iter;
+			key->next = NULL;
+			continue;
 		}
-		module_entry = add_jump_label_module_entry(entry, iter_begin,
-							   count, mod);
-		if (IS_ERR(module_entry))
-			return PTR_ERR(module_entry);
+
+		jlm = kzalloc(sizeof(struct jump_label_mod), GFP_KERNEL);
+		if (!jlm)
+			return -ENOMEM;
+
+		jlm->mod = mod;
+		jlm->entries = iter;
+		jlm->next = key->next;
+		key->next = jlm;
+
+		if (jump_label_enabled(key))
+			__jump_label_update(key, iter, JUMP_LABEL_ENABLE);
 	}
+
 	return 0;
 }
 
-static void remove_jump_label_module(struct module *mod)
+static void jump_label_del_module(struct module *mod)
 {
-	struct hlist_head *head;
-	struct hlist_node *node, *node_next, *module_node, *module_node_next;
-	struct jump_label_entry *e;
-	struct jump_label_module_entry *e_module;
-	int i;
+	struct jump_entry *iter_start = mod->jump_entries;
+	struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
+	struct jump_entry *iter;
+	struct jump_label_key *key = NULL;
+	struct jump_label_mod *jlm, **prev;
 
-	/* if the module doesn't have jump label entries, just return */
-	if (!mod->num_jump_entries)
-		return;
+	for (iter = iter_start; iter < iter_stop; iter++) {
+		if (iter->key == (jump_label_t)(unsigned long)key)
+			continue;
+
+		key = (struct jump_label_key *)(unsigned long)iter->key;
+
+		if (__module_address(iter->key) == mod)
+			continue;
+
+		prev = &key->next;
+		jlm = key->next;
 
-	for (i = 0; i < JUMP_LABEL_TABLE_SIZE; i++) {
-		head = &jump_label_table[i];
-		hlist_for_each_entry_safe(e, node, node_next, head, hlist) {
-			hlist_for_each_entry_safe(e_module, module_node,
-						  module_node_next,
-						  &(e->modules), hlist) {
-				if (e_module->mod == mod) {
-					hlist_del(&e_module->hlist);
-					kfree(e_module);
-				}
-			}
-			if (hlist_empty(&e->modules) && (e->nr_entries == 0)) {
-				hlist_del(&e->hlist);
-				kfree(e);
-			}
+		while (jlm && jlm->mod != mod) {
+			prev = &jlm->next;
+			jlm = jlm->next;
+		}
+
+		if (jlm) {
+			*prev = jlm->next;
+			kfree(jlm);
 		}
 	}
 }
 
-static void remove_jump_label_module_init(struct module *mod)
+static void jump_label_invalidate_module_init(struct module *mod)
 {
-	struct hlist_head *head;
-	struct hlist_node *node, *node_next, *module_node, *module_node_next;
-	struct jump_label_entry *e;
-	struct jump_label_module_entry *e_module;
+	struct jump_entry *iter_start = mod->jump_entries;
+	struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
 	struct jump_entry *iter;
-	int i, count;
-
-	/* if the module doesn't have jump label entries, just return */
-	if (!mod->num_jump_entries)
-		return;
 
-	for (i = 0; i < JUMP_LABEL_TABLE_SIZE; i++) {
-		head = &jump_label_table[i];
-		hlist_for_each_entry_safe(e, node, node_next, head, hlist) {
-			hlist_for_each_entry_safe(e_module, module_node,
-						  module_node_next,
-						  &(e->modules), hlist) {
-				if (e_module->mod != mod)
-					continue;
-				count = e_module->nr_entries;
-				iter = e_module->table;
-				while (count--) {
-					if (within_module_init(iter->code, mod))
-						iter->key = 0;
-					iter++;
-				}
-			}
-		}
+	for (iter = iter_start; iter < iter_stop; iter++) {
+		if (within_module_init(iter->code, mod))
+			iter->code = 0;
 	}
 }
 
@@ -426,59 +305,77 @@ jump_label_module_notify(struct notifier_block *self, unsigned long val,
 	switch (val) {
 	case MODULE_STATE_COMING:
 		jump_label_lock();
-		ret = add_jump_label_module(mod);
+		ret = jump_label_add_module(mod);
 		if (ret)
-			remove_jump_label_module(mod);
+			jump_label_del_module(mod);
 		jump_label_unlock();
 		break;
 	case MODULE_STATE_GOING:
 		jump_label_lock();
-		remove_jump_label_module(mod);
+		jump_label_del_module(mod);
 		jump_label_unlock();
 		break;
 	case MODULE_STATE_LIVE:
 		jump_label_lock();
-		remove_jump_label_module_init(mod);
+		jump_label_invalidate_module_init(mod);
 		jump_label_unlock();
 		break;
 	}
-	return ret;
-}
 
-/***
- * apply_jump_label_nops - patch module jump labels with arch_get_jump_label_nop()
- * @mod: module to patch
- *
- * Allow for run-time selection of the optimal nops. Before the module
- * loads patch these with arch_get_jump_label_nop(), which is specified by
- * the arch specific jump label code.
- */
-void jump_label_apply_nops(struct module *mod)
-{
-	struct jump_entry *iter;
-
-	/* if the module doesn't have jump label entries, just return */
-	if (!mod->num_jump_entries)
-		return;
-
-	iter = mod->jump_entries;
-	while (iter < mod->jump_entries + mod->num_jump_entries) {
-		arch_jump_label_text_poke_early(iter->code);
-		iter++;
-	}
+	return notifier_from_errno(ret);
 }
 
 struct notifier_block jump_label_module_nb = {
 	.notifier_call = jump_label_module_notify,
-	.priority = 0,
+	.priority = 1, /* higher than tracepoints */
 };
 
-static __init int init_jump_label_module(void)
+static __init int jump_label_init_module(void)
 {
 	return register_module_notifier(&jump_label_module_nb);
 }
-early_initcall(init_jump_label_module);
+early_initcall(jump_label_init_module);
 
 #endif /* CONFIG_MODULES */
 
+/***
+ * jump_label_text_reserved - check if addr range is reserved
+ * @start: start text addr
+ * @end: end text addr
+ *
+ * checks if the text addr located between @start and @end
+ * overlaps with any of the jump label patch addresses. Code
+ * that wants to modify kernel text should first verify that
+ * it does not overlap with any of the jump label addresses.
+ * Caller must hold jump_label_mutex.
+ *
+ * returns 1 if there is an overlap, 0 otherwise
+ */
+int jump_label_text_reserved(void *start, void *end)
+{
+	int ret = __jump_label_text_reserved(__start___jump_table,
+			__stop___jump_table, start, end);
+
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_MODULES
+	ret = __jump_label_mod_text_reserved(start, end);
+#endif
+	return ret;
+}
+
+static void jump_label_update(struct jump_label_key *key, int enable)
+{
+	struct jump_entry *entry = key->entries;
+
+	/* if there are no users, entry can be NULL */
+	if (entry)
+		__jump_label_update(key, entry, enable);
+
+#ifdef CONFIG_MODULES
+	__jump_label_mod_update(key, enable);
+#endif
+}
+
 #endif
diff --git a/kernel/kexec.c b/kernel/kexec.c
index ec19b92c7eb..8d814cbc810 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -33,6 +33,7 @@
 #include <linux/vmalloc.h>
 #include <linux/swap.h>
 #include <linux/kmsg_dump.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/page.h>
 #include <asm/uaccess.h>
@@ -144,7 +145,7 @@ static int do_kimage_alloc(struct kimage **rimage, unsigned long entry,
 	/* Initialize the list of destination pages */
 	INIT_LIST_HEAD(&image->dest_pages);
 
-	/* Initialize the list of unuseable pages */
+	/* Initialize the list of unusable pages */
 	INIT_LIST_HEAD(&image->unuseable_pages);
 
 	/* Read in the segments */
@@ -454,7 +455,7 @@ static struct page *kimage_alloc_normal_control_pages(struct kimage *image,
 	/* Deal with the destination pages I have inadvertently allocated.
 	 *
 	 * Ideally I would convert multi-page allocations into single
-	 * page allocations, and add everyting to image->dest_pages.
+	 * page allocations, and add everything to image->dest_pages.
 	 *
 	 * For now it is simpler to just free the pages.
 	 */
@@ -602,7 +603,7 @@ static void kimage_free_extra_pages(struct kimage *image)
 	/* Walk through and free any extra destination pages I may have */
 	kimage_free_page_list(&image->dest_pages);
 
-	/* Walk through and free any unuseable pages I have cached */
+	/* Walk through and free any unusable pages I have cached */
 	kimage_free_page_list(&image->unuseable_pages);
 
 }
@@ -1099,7 +1100,8 @@ size_t crash_get_memory_size(void)
 	return size;
 }
 
-static void free_reserved_phys_range(unsigned long begin, unsigned long end)
+void __weak crash_free_reserved_phys_range(unsigned long begin,
+					   unsigned long end)
 {
 	unsigned long addr;
 
@@ -1135,7 +1137,7 @@ int crash_shrink_memory(unsigned long new_size)
 	start = roundup(start, PAGE_SIZE);
 	end = roundup(start + new_size, PAGE_SIZE);
 
-	free_reserved_phys_range(end, crashk_res.end);
+	crash_free_reserved_phys_range(end, crashk_res.end);
 
 	if ((start == end) && (crashk_res.parent != NULL))
 		release_resource(&crashk_res);
@@ -1529,8 +1531,7 @@ int kernel_kexec(void)
 		if (error)
 			goto Enable_cpus;
 		local_irq_disable();
-		/* Suspend system devices */
-		error = sysdev_suspend(PMSG_FREEZE);
+		error = syscore_suspend();
 		if (error)
 			goto Enable_irqs;
 	} else
@@ -1545,7 +1546,7 @@ int kernel_kexec(void)
 
 #ifdef CONFIG_KEXEC_JUMP
 	if (kexec_image->preserve_context) {
-		sysdev_resume();
+		syscore_resume();
  Enable_irqs:
 		local_irq_enable();
  Enable_cpus:
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 9cd0591c96a..5ae0ff38425 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -245,7 +245,6 @@ static void __call_usermodehelper(struct work_struct *work)
 	}
 }
 
-#ifdef CONFIG_PM_SLEEP
 /*
  * If set, call_usermodehelper_exec() will exit immediately returning -EBUSY
  * (used for preventing user land processes from being created after the user
@@ -301,6 +300,15 @@ void usermodehelper_enable(void)
 	usermodehelper_disabled = 0;
 }
 
+/**
+ * usermodehelper_is_disabled - check if new helpers are allowed to be started
+ */
+bool usermodehelper_is_disabled(void)
+{
+	return usermodehelper_disabled;
+}
+EXPORT_SYMBOL_GPL(usermodehelper_is_disabled);
+
 static void helper_lock(void)
 {
 	atomic_inc(&running_helpers);
@@ -312,12 +320,6 @@ static void helper_unlock(void)
 	if (atomic_dec_and_test(&running_helpers))
 		wake_up(&running_helpers_waitq);
 }
-#else /* CONFIG_PM_SLEEP */
-#define usermodehelper_disabled	0
-
-static inline void helper_lock(void) {}
-static inline void helper_unlock(void) {}
-#endif /* CONFIG_PM_SLEEP */
 
 /**
  * call_usermodehelper_setup - prepare to call a usermode helper
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index 0b624e79180..3b053c04dd8 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -16,6 +16,7 @@
 #include <linux/kexec.h>
 #include <linux/profile.h>
 #include <linux/sched.h>
+#include <linux/capability.h>
 
 #define KERNEL_ATTR_RO(_name) \
 static struct kobj_attribute _name##_attr = __ATTR_RO(_name)
@@ -131,6 +132,14 @@ KERNEL_ATTR_RO(vmcoreinfo);
 
 #endif /* CONFIG_KEXEC */
 
+/* whether file capabilities are enabled */
+static ssize_t fscaps_show(struct kobject *kobj,
+				  struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", file_caps_enabled);
+}
+KERNEL_ATTR_RO(fscaps);
+
 /*
  * Make /sys/kernel/notes give the raw contents of our kernel .notes section.
  */
@@ -158,6 +167,7 @@ struct kobject *kernel_kobj;
 EXPORT_SYMBOL_GPL(kernel_kobj);
 
 static struct attribute * kernel_attrs[] = {
+	&fscaps_attr.attr,
 #if defined(CONFIG_HOTPLUG)
 	&uevent_seqnum_attr.attr,
 	&uevent_helper_attr.attr,
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 684ab3f7dd7..3b34d2732bc 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -139,7 +139,7 @@ static void create_kthread(struct kthread_create_info *create)
  * in @node, to get NUMA affinity for kthread stack, or else give -1.
  * When woken, the thread will run @threadfn() with @data as its
  * argument. @threadfn() can either call do_exit() directly if it is a
- * standalone thread for which noone will call kthread_stop(), or
+ * standalone thread for which no one will call kthread_stop(), or
  * return when 'kthread_should_stop()' is true (which means
  * kthread_stop() has been called).  The return value should be zero
  * or a negative error number; it will be passed to kthread_stop().
diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index ee74b35e528..376066e1041 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -153,7 +153,7 @@ static inline void store_stacktrace(struct task_struct *tsk,
 }
 
 /**
- * __account_scheduler_latency - record an occured latency
+ * __account_scheduler_latency - record an occurred latency
  * @tsk - the task struct of the task hitting the latency
  * @usecs - the duration of the latency in microseconds
  * @inter - 1 if the sleep was interruptible, 0 if uninterruptible
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 0d2058da80f..63437d065ac 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -490,6 +490,18 @@ void get_usage_chars(struct lock_class *class, char usage[LOCK_USAGE_CHARS])
 	usage[i] = '\0';
 }
 
+static int __print_lock_name(struct lock_class *class)
+{
+	char str[KSYM_NAME_LEN];
+	const char *name;
+
+	name = class->name;
+	if (!name)
+		name = __get_key_name(class->key, str);
+
+	return printk("%s", name);
+}
+
 static void print_lock_name(struct lock_class *class)
 {
 	char str[KSYM_NAME_LEN], usage[LOCK_USAGE_CHARS];
@@ -1053,6 +1065,56 @@ print_circular_bug_entry(struct lock_list *target, int depth)
 	return 0;
 }
 
+static void
+print_circular_lock_scenario(struct held_lock *src,
+			     struct held_lock *tgt,
+			     struct lock_list *prt)
+{
+	struct lock_class *source = hlock_class(src);
+	struct lock_class *target = hlock_class(tgt);
+	struct lock_class *parent = prt->class;
+
+	/*
+	 * A direct locking problem where unsafe_class lock is taken
+	 * directly by safe_class lock, then all we need to show
+	 * is the deadlock scenario, as it is obvious that the
+	 * unsafe lock is taken under the safe lock.
+	 *
+	 * But if there is a chain instead, where the safe lock takes
+	 * an intermediate lock (middle_class) where this lock is
+	 * not the same as the safe lock, then the lock chain is
+	 * used to describe the problem. Otherwise we would need
+	 * to show a different CPU case for each link in the chain
+	 * from the safe_class lock to the unsafe_class lock.
+	 */
+	if (parent != source) {
+		printk("Chain exists of:\n  ");
+		__print_lock_name(source);
+		printk(" --> ");
+		__print_lock_name(parent);
+		printk(" --> ");
+		__print_lock_name(target);
+		printk("\n\n");
+	}
+
+	printk(" Possible unsafe locking scenario:\n\n");
+	printk("       CPU0                    CPU1\n");
+	printk("       ----                    ----\n");
+	printk("  lock(");
+	__print_lock_name(target);
+	printk(");\n");
+	printk("                               lock(");
+	__print_lock_name(parent);
+	printk(");\n");
+	printk("                               lock(");
+	__print_lock_name(target);
+	printk(");\n");
+	printk("  lock(");
+	__print_lock_name(source);
+	printk(");\n");
+	printk("\n *** DEADLOCK ***\n\n");
+}
+
 /*
  * When a circular dependency is detected, print the
  * header first:
@@ -1096,6 +1158,7 @@ static noinline int print_circular_bug(struct lock_list *this,
 {
 	struct task_struct *curr = current;
 	struct lock_list *parent;
+	struct lock_list *first_parent;
 	int depth;
 
 	if (!debug_locks_off_graph_unlock() || debug_locks_silent)
@@ -1109,6 +1172,7 @@ static noinline int print_circular_bug(struct lock_list *this,
 	print_circular_bug_header(target, depth, check_src, check_tgt);
 
 	parent = get_lock_parent(target);
+	first_parent = parent;
 
 	while (parent) {
 		print_circular_bug_entry(parent, --depth);
@@ -1116,6 +1180,9 @@ static noinline int print_circular_bug(struct lock_list *this,
 	}
 
 	printk("\nother info that might help us debug this:\n\n");
+	print_circular_lock_scenario(check_src, check_tgt,
+				     first_parent);
+
 	lockdep_print_held_locks(curr);
 
 	printk("\nstack backtrace:\n");
@@ -1314,7 +1381,7 @@ print_shortest_lock_dependencies(struct lock_list *leaf,
 		printk("\n");
 
 		if (depth == 0 && (entry != root)) {
-			printk("lockdep:%s bad BFS generated tree\n", __func__);
+			printk("lockdep:%s bad path found in chain graph\n", __func__);
 			break;
 		}
 
@@ -1325,6 +1392,62 @@ print_shortest_lock_dependencies(struct lock_list *leaf,
 	return;
 }
 
+static void
+print_irq_lock_scenario(struct lock_list *safe_entry,
+			struct lock_list *unsafe_entry,
+			struct lock_class *prev_class,
+			struct lock_class *next_class)
+{
+	struct lock_class *safe_class = safe_entry->class;
+	struct lock_class *unsafe_class = unsafe_entry->class;
+	struct lock_class *middle_class = prev_class;
+
+	if (middle_class == safe_class)
+		middle_class = next_class;
+
+	/*
+	 * A direct locking problem where unsafe_class lock is taken
+	 * directly by safe_class lock, then all we need to show
+	 * is the deadlock scenario, as it is obvious that the
+	 * unsafe lock is taken under the safe lock.
+	 *
+	 * But if there is a chain instead, where the safe lock takes
+	 * an intermediate lock (middle_class) where this lock is
+	 * not the same as the safe lock, then the lock chain is
+	 * used to describe the problem. Otherwise we would need
+	 * to show a different CPU case for each link in the chain
+	 * from the safe_class lock to the unsafe_class lock.
+	 */
+	if (middle_class != unsafe_class) {
+		printk("Chain exists of:\n  ");
+		__print_lock_name(safe_class);
+		printk(" --> ");
+		__print_lock_name(middle_class);
+		printk(" --> ");
+		__print_lock_name(unsafe_class);
+		printk("\n\n");
+	}
+
+	printk(" Possible interrupt unsafe locking scenario:\n\n");
+	printk("       CPU0                    CPU1\n");
+	printk("       ----                    ----\n");
+	printk("  lock(");
+	__print_lock_name(unsafe_class);
+	printk(");\n");
+	printk("                               local_irq_disable();\n");
+	printk("                               lock(");
+	__print_lock_name(safe_class);
+	printk(");\n");
+	printk("                               lock(");
+	__print_lock_name(middle_class);
+	printk(");\n");
+	printk("  <Interrupt>\n");
+	printk("    lock(");
+	__print_lock_name(safe_class);
+	printk(");\n");
+	printk("\n *** DEADLOCK ***\n\n");
+}
+
 static int
 print_bad_irq_dependency(struct task_struct *curr,
 			 struct lock_list *prev_root,
@@ -1376,6 +1499,9 @@ print_bad_irq_dependency(struct task_struct *curr,
 	print_stack_trace(forwards_entry->class->usage_traces + bit2, 1);
 
 	printk("\nother info that might help us debug this:\n\n");
+	print_irq_lock_scenario(backwards_entry, forwards_entry,
+				hlock_class(prev), hlock_class(next));
+
 	lockdep_print_held_locks(curr);
 
 	printk("\nthe dependencies between %s-irq-safe lock", irqclass);
@@ -1539,6 +1665,26 @@ static inline void inc_chains(void)
 
 #endif
 
+static void
+print_deadlock_scenario(struct held_lock *nxt,
+			     struct held_lock *prv)
+{
+	struct lock_class *next = hlock_class(nxt);
+	struct lock_class *prev = hlock_class(prv);
+
+	printk(" Possible unsafe locking scenario:\n\n");
+	printk("       CPU0\n");
+	printk("       ----\n");
+	printk("  lock(");
+	__print_lock_name(prev);
+	printk(");\n");
+	printk("  lock(");
+	__print_lock_name(next);
+	printk(");\n");
+	printk("\n *** DEADLOCK ***\n\n");
+	printk(" May be due to missing lock nesting notation\n\n");
+}
+
 static int
 print_deadlock_bug(struct task_struct *curr, struct held_lock *prev,
 		   struct held_lock *next)
@@ -1557,6 +1703,7 @@ print_deadlock_bug(struct task_struct *curr, struct held_lock *prev,
 	print_lock(prev);
 
 	printk("\nother info that might help us debug this:\n");
+	print_deadlock_scenario(next, prev);
 	lockdep_print_held_locks(curr);
 
 	printk("\nstack backtrace:\n");
@@ -1826,7 +1973,7 @@ static inline int lookup_chain_cache(struct task_struct *curr,
 	struct list_head *hash_head = chainhashentry(chain_key);
 	struct lock_chain *chain;
 	struct held_lock *hlock_curr, *hlock_next;
-	int i, j, n, cn;
+	int i, j;
 
 	if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
 		return 0;
@@ -1886,15 +2033,9 @@ cache_hit:
 	}
 	i++;
 	chain->depth = curr->lockdep_depth + 1 - i;
-	cn = nr_chain_hlocks;
-	while (cn + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS) {
-		n = cmpxchg(&nr_chain_hlocks, cn, cn + chain->depth);
-		if (n == cn)
-			break;
-		cn = n;
-	}
-	if (likely(cn + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS)) {
-		chain->base = cn;
+	if (likely(nr_chain_hlocks + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS)) {
+		chain->base = nr_chain_hlocks;
+		nr_chain_hlocks += chain->depth;
 		for (j = 0; j < chain->depth - 1; j++, i++) {
 			int lock_id = curr->held_locks[i].class_idx - 1;
 			chain_hlocks[chain->base + j] = lock_id;
@@ -2011,6 +2152,24 @@ static void check_chain_key(struct task_struct *curr)
 #endif
 }
 
+static void
+print_usage_bug_scenario(struct held_lock *lock)
+{
+	struct lock_class *class = hlock_class(lock);
+
+	printk(" Possible unsafe locking scenario:\n\n");
+	printk("       CPU0\n");
+	printk("       ----\n");
+	printk("  lock(");
+	__print_lock_name(class);
+	printk(");\n");
+	printk("  <Interrupt>\n");
+	printk("    lock(");
+	__print_lock_name(class);
+	printk(");\n");
+	printk("\n *** DEADLOCK ***\n\n");
+}
+
 static int
 print_usage_bug(struct task_struct *curr, struct held_lock *this,
 		enum lock_usage_bit prev_bit, enum lock_usage_bit new_bit)
@@ -2039,6 +2198,8 @@ print_usage_bug(struct task_struct *curr, struct held_lock *this,
 
 	print_irqtrace_events(curr);
 	printk("\nother info that might help us debug this:\n");
+	print_usage_bug_scenario(this);
+
 	lockdep_print_held_locks(curr);
 
 	printk("\nstack backtrace:\n");
@@ -2073,6 +2234,10 @@ print_irq_inversion_bug(struct task_struct *curr,
 			struct held_lock *this, int forwards,
 			const char *irqclass)
 {
+	struct lock_list *entry = other;
+	struct lock_list *middle = NULL;
+	int depth;
+
 	if (!debug_locks_off_graph_unlock() || debug_locks_silent)
 		return 0;
 
@@ -2091,6 +2256,25 @@ print_irq_inversion_bug(struct task_struct *curr,
 	printk("\n\nand interrupts could create inverse lock ordering between them.\n\n");
 
 	printk("\nother info that might help us debug this:\n");
+
+	/* Find a middle lock (if one exists) */
+	depth = get_lock_depth(other);
+	do {
+		if (depth == 0 && (entry != root)) {
+			printk("lockdep:%s bad path found in chain graph\n", __func__);
+			break;
+		}
+		middle = entry;
+		entry = get_lock_parent(entry);
+		depth--;
+	} while (entry && entry != root && (depth >= 0));
+	if (forwards)
+		print_irq_lock_scenario(root, other,
+			middle ? middle->class : root->class, other->class);
+	else
+		print_irq_lock_scenario(other, root,
+			middle ? middle->class : other->class, root->class);
+
 	lockdep_print_held_locks(curr);
 
 	printk("\nthe shortest dependencies between 2nd lock and 1st lock:\n");
@@ -2309,7 +2493,7 @@ void trace_hardirqs_on_caller(unsigned long ip)
 	if (unlikely(curr->hardirqs_enabled)) {
 		/*
 		 * Neither irq nor preemption are disabled here
-		 * so this is racy by nature but loosing one hit
+		 * so this is racy by nature but losing one hit
 		 * in a stat is not a big deal.
 		 */
 		__debug_atomic_inc(redundant_hardirqs_on);
@@ -2620,7 +2804,7 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this,
 	if (!graph_lock())
 		return 0;
 	/*
-	 * Make sure we didnt race:
+	 * Make sure we didn't race:
 	 */
 	if (unlikely(hlock_class(this)->usage_mask & new_mask)) {
 		graph_unlock();
diff --git a/kernel/module.c b/kernel/module.c
index 1f9f7bc56ca..22879725678 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -57,6 +57,7 @@
 #include <linux/kmemleak.h>
 #include <linux/jump_label.h>
 #include <linux/pfn.h>
+#include <linux/bsearch.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/module.h>
@@ -240,23 +241,24 @@ static bool each_symbol_in_section(const struct symsearch *arr,
 				   struct module *owner,
 				   bool (*fn)(const struct symsearch *syms,
 					      struct module *owner,
-					      unsigned int symnum, void *data),
+					      void *data),
 				   void *data)
 {
-	unsigned int i, j;
+	unsigned int j;
 
 	for (j = 0; j < arrsize; j++) {
-		for (i = 0; i < arr[j].stop - arr[j].start; i++)
-			if (fn(&arr[j], owner, i, data))
-				return true;
+		if (fn(&arr[j], owner, data))
+			return true;
 	}
 
 	return false;
 }
 
 /* Returns true as soon as fn returns true, otherwise false. */
-bool each_symbol(bool (*fn)(const struct symsearch *arr, struct module *owner,
-			    unsigned int symnum, void *data), void *data)
+bool each_symbol_section(bool (*fn)(const struct symsearch *arr,
+				    struct module *owner,
+				    void *data),
+			 void *data)
 {
 	struct module *mod;
 	static const struct symsearch arr[] = {
@@ -309,7 +311,7 @@ bool each_symbol(bool (*fn)(const struct symsearch *arr, struct module *owner,
 	}
 	return false;
 }
-EXPORT_SYMBOL_GPL(each_symbol);
+EXPORT_SYMBOL_GPL(each_symbol_section);
 
 struct find_symbol_arg {
 	/* Input */
@@ -323,15 +325,12 @@ struct find_symbol_arg {
 	const struct kernel_symbol *sym;
 };
 
-static bool find_symbol_in_section(const struct symsearch *syms,
-				   struct module *owner,
-				   unsigned int symnum, void *data)
+static bool check_symbol(const struct symsearch *syms,
+				 struct module *owner,
+				 unsigned int symnum, void *data)
 {
 	struct find_symbol_arg *fsa = data;
 
-	if (strcmp(syms->start[symnum].name, fsa->name) != 0)
-		return false;
-
 	if (!fsa->gplok) {
 		if (syms->licence == GPL_ONLY)
 			return false;
@@ -365,6 +364,30 @@ static bool find_symbol_in_section(const struct symsearch *syms,
 	return true;
 }
 
+static int cmp_name(const void *va, const void *vb)
+{
+	const char *a;
+	const struct kernel_symbol *b;
+	a = va; b = vb;
+	return strcmp(a, b->name);
+}
+
+static bool find_symbol_in_section(const struct symsearch *syms,
+				   struct module *owner,
+				   void *data)
+{
+	struct find_symbol_arg *fsa = data;
+	struct kernel_symbol *sym;
+
+	sym = bsearch(fsa->name, syms->start, syms->stop - syms->start,
+			sizeof(struct kernel_symbol), cmp_name);
+
+	if (sym != NULL && check_symbol(syms, owner, sym - syms->start, data))
+		return true;
+
+	return false;
+}
+
 /* Find a symbol and return it, along with, (optional) crc and
  * (optional) module which owns it.  Needs preempt disabled or module_mutex. */
 const struct kernel_symbol *find_symbol(const char *name,
@@ -379,7 +402,7 @@ const struct kernel_symbol *find_symbol(const char *name,
 	fsa.gplok = gplok;
 	fsa.warn = warn;
 
-	if (each_symbol(find_symbol_in_section, &fsa)) {
+	if (each_symbol_section(find_symbol_in_section, &fsa)) {
 		if (owner)
 			*owner = fsa.owner;
 		if (crc)
@@ -809,7 +832,7 @@ SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
 		wait_for_zero_refcount(mod);
 
 	mutex_unlock(&module_mutex);
-	/* Final destruction now noone is using it. */
+	/* Final destruction now no one is using it. */
 	if (mod->exit != NULL)
 		mod->exit();
 	blocking_notifier_call_chain(&module_notify_list,
@@ -1607,27 +1630,28 @@ static void set_section_ro_nx(void *base,
 	}
 }
 
-/* Setting memory back to RW+NX before releasing it */
-void unset_section_ro_nx(struct module *mod, void *module_region)
+static void unset_module_core_ro_nx(struct module *mod)
 {
-	unsigned long total_pages;
-
-	if (mod->module_core == module_region) {
-		/* Set core as NX+RW */
-		total_pages = MOD_NUMBER_OF_PAGES(mod->module_core, mod->core_size);
-		set_memory_nx((unsigned long)mod->module_core, total_pages);
-		set_memory_rw((unsigned long)mod->module_core, total_pages);
+	set_page_attributes(mod->module_core + mod->core_text_size,
+		mod->module_core + mod->core_size,
+		set_memory_x);
+	set_page_attributes(mod->module_core,
+		mod->module_core + mod->core_ro_size,
+		set_memory_rw);
+}
 
-	} else if (mod->module_init == module_region) {
-		/* Set init as NX+RW */
-		total_pages = MOD_NUMBER_OF_PAGES(mod->module_init, mod->init_size);
-		set_memory_nx((unsigned long)mod->module_init, total_pages);
-		set_memory_rw((unsigned long)mod->module_init, total_pages);
-	}
+static void unset_module_init_ro_nx(struct module *mod)
+{
+	set_page_attributes(mod->module_init + mod->init_text_size,
+		mod->module_init + mod->init_size,
+		set_memory_x);
+	set_page_attributes(mod->module_init,
+		mod->module_init + mod->init_ro_size,
+		set_memory_rw);
 }
 
 /* Iterate through all modules and set each module's text as RW */
-void set_all_modules_text_rw()
+void set_all_modules_text_rw(void)
 {
 	struct module *mod;
 
@@ -1648,7 +1672,7 @@ void set_all_modules_text_rw()
 }
 
 /* Iterate through all modules and set each module's text as RO */
-void set_all_modules_text_ro()
+void set_all_modules_text_ro(void)
 {
 	struct module *mod;
 
@@ -1669,7 +1693,8 @@ void set_all_modules_text_ro()
 }
 #else
 static inline void set_section_ro_nx(void *base, unsigned long text_size, unsigned long ro_size, unsigned long total_size) { }
-static inline void unset_section_ro_nx(struct module *mod, void *module_region) { }
+static void unset_module_core_ro_nx(struct module *mod) { }
+static void unset_module_init_ro_nx(struct module *mod) { }
 #endif
 
 /* Free a module, remove from lists, etc. */
@@ -1696,7 +1721,7 @@ static void free_module(struct module *mod)
 	destroy_params(mod->kp, mod->num_kp);
 
 	/* This may be NULL, but that's OK */
-	unset_section_ro_nx(mod, mod->module_init);
+	unset_module_init_ro_nx(mod);
 	module_free(mod, mod->module_init);
 	kfree(mod->args);
 	percpu_modfree(mod);
@@ -1705,7 +1730,7 @@ static void free_module(struct module *mod)
 	lockdep_free_key_range(mod->module_core, mod->core_size);
 
 	/* Finally, free the core (containing the module structure) */
-	unset_section_ro_nx(mod, mod->module_core);
+	unset_module_core_ro_nx(mod);
 	module_free(mod, mod->module_core);
 
 #ifdef CONFIG_MPU
@@ -2030,11 +2055,8 @@ static const struct kernel_symbol *lookup_symbol(const char *name,
 	const struct kernel_symbol *start,
 	const struct kernel_symbol *stop)
 {
-	const struct kernel_symbol *ks = start;
-	for (; ks < stop; ks++)
-		if (strcmp(ks->name, name) == 0)
-			return ks;
-	return NULL;
+	return bsearch(name, start, stop - start,
+			sizeof(struct kernel_symbol), cmp_name);
 }
 
 static int is_exported(const char *name, unsigned long value,
@@ -2777,7 +2799,7 @@ static struct module *load_module(void __user *umod,
 	mod->state = MODULE_STATE_COMING;
 
 	/* Now sew it into the lists so we can get lockdep and oops
-	 * info during argument parsing.  Noone should access us, since
+	 * info during argument parsing.  No one should access us, since
 	 * strong_try_module_get() will fail.
 	 * lockdep/oops can run asynchronous, so use the RCU list insertion
 	 * function to insert in a way safe to concurrent readers.
@@ -2931,10 +2953,11 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 	mod->symtab = mod->core_symtab;
 	mod->strtab = mod->core_strtab;
 #endif
-	unset_section_ro_nx(mod, mod->module_init);
+	unset_module_init_ro_nx(mod);
 	module_free(mod, mod->module_init);
 	mod->module_init = NULL;
 	mod->init_size = 0;
+	mod->init_ro_size = 0;
 	mod->init_text_size = 0;
 	mutex_unlock(&module_mutex);
 
@@ -2971,7 +2994,7 @@ static const char *get_ksymbol(struct module *mod,
 	else
 		nextval = (unsigned long)mod->module_core+mod->core_text_size;
 
-	/* Scan for closest preceeding symbol, and next symbol. (ELF
+	/* Scan for closest preceding symbol, and next symbol. (ELF
 	   starts real symbols at 1). */
 	for (i = 1; i < mod->num_symtab; i++) {
 		if (mod->symtab[i].st_shndx == SHN_UNDEF)
diff --git a/kernel/mutex-debug.c b/kernel/mutex-debug.c
index ec815a960b5..73da83aff41 100644
--- a/kernel/mutex-debug.c
+++ b/kernel/mutex-debug.c
@@ -75,7 +75,7 @@ void debug_mutex_unlock(struct mutex *lock)
 		return;
 
 	DEBUG_LOCKS_WARN_ON(lock->magic != lock);
-	DEBUG_LOCKS_WARN_ON(lock->owner != current_thread_info());
+	DEBUG_LOCKS_WARN_ON(lock->owner != current);
 	DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next);
 	mutex_clear_owner(lock);
 }
diff --git a/kernel/mutex-debug.h b/kernel/mutex-debug.h
index 57d527a16f9..0799fd3e4cf 100644
--- a/kernel/mutex-debug.h
+++ b/kernel/mutex-debug.h
@@ -29,7 +29,7 @@ extern void debug_mutex_init(struct mutex *lock, const char *name,
 
 static inline void mutex_set_owner(struct mutex *lock)
 {
-	lock->owner = current_thread_info();
+	lock->owner = current;
 }
 
 static inline void mutex_clear_owner(struct mutex *lock)
diff --git a/kernel/mutex.c b/kernel/mutex.c
index a5889fb28ec..2c938e2337c 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -160,14 +160,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 	 */
 
 	for (;;) {
-		struct thread_info *owner;
-
-		/*
-		 * If we own the BKL, then don't spin. The owner of
-		 * the mutex might be waiting on us to release the BKL.
-		 */
-		if (unlikely(current->lock_depth >= 0))
-			break;
+		struct task_struct *owner;
 
 		/*
 		 * If there's an owner, wait for it to either
@@ -245,7 +238,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 		}
 		__set_task_state(task, state);
 
-		/* didnt get the lock, go to sleep: */
+		/* didn't get the lock, go to sleep: */
 		spin_unlock_mutex(&lock->wait_lock, flags);
 		preempt_enable_no_resched();
 		schedule();
diff --git a/kernel/mutex.h b/kernel/mutex.h
index 67578ca48f9..4115fbf83b1 100644
--- a/kernel/mutex.h
+++ b/kernel/mutex.h
@@ -19,7 +19,7 @@
 #ifdef CONFIG_SMP
 static inline void mutex_set_owner(struct mutex *lock)
 {
-	lock->owner = current_thread_info();
+	lock->owner = current;
 }
 
 static inline void mutex_clear_owner(struct mutex *lock)
diff --git a/kernel/padata.c b/kernel/padata.c
index 751019415d2..b91941df5e6 100644
--- a/kernel/padata.c
+++ b/kernel/padata.c
@@ -262,7 +262,7 @@ static void padata_reorder(struct parallel_data *pd)
 		/*
 		 * This cpu has to do the parallel processing of the next
 		 * object. It's waiting in the cpu's parallelization queue,
-		 * so exit imediately.
+		 * so exit immediately.
 		 */
 		if (PTR_ERR(padata) == -ENODATA) {
 			del_timer(&pd->timer);
@@ -284,7 +284,7 @@ static void padata_reorder(struct parallel_data *pd)
 	/*
 	 * The next object that needs serialization might have arrived to
 	 * the reorder queues in the meantime, we will be called again
-	 * from the timer function if noone else cares for it.
+	 * from the timer function if no one else cares for it.
 	 */
 	if (atomic_read(&pd->reorder_objects)
 			&& !(pinst->flags & PADATA_RESET))
@@ -515,7 +515,7 @@ static void __padata_stop(struct padata_instance *pinst)
 	put_online_cpus();
 }
 
-/* Replace the internal control stucture with a new one. */
+/* Replace the internal control structure with a new one. */
 static void padata_replace(struct padata_instance *pinst,
 			   struct parallel_data *pd_new)
 {
@@ -768,7 +768,7 @@ static int __padata_remove_cpu(struct padata_instance *pinst, int cpu)
 }
 
  /**
- * padata_remove_cpu - remove a cpu from the one or both(serial and paralell)
+ * padata_remove_cpu - remove a cpu from the one or both(serial and parallel)
  *                     padata cpumasks.
  *
  * @pinst: padata instance
diff --git a/kernel/params.c b/kernel/params.c
index 0da1411222b..ed72e133086 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -95,7 +95,7 @@ static int parse_one(char *param,
 	/* Find parameter */
 	for (i = 0; i < num_params; i++) {
 		if (parameq(param, params[i].name)) {
-			/* Noone handled NULL, so do it here. */
+			/* No one handled NULL, so do it here. */
 			if (!val && params[i].ops->set != param_set_bool)
 				return -EINVAL;
 			DEBUGP("They are equal!  Calling %p\n",
@@ -297,21 +297,15 @@ EXPORT_SYMBOL(param_ops_charp);
 int param_set_bool(const char *val, const struct kernel_param *kp)
 {
 	bool v;
+	int ret;
 
 	/* No equals means "set"... */
 	if (!val) val = "1";
 
 	/* One of =[yYnN01] */
-	switch (val[0]) {
-	case 'y': case 'Y': case '1':
-		v = true;
-		break;
-	case 'n': case 'N': case '0':
-		v = false;
-		break;
-	default:
-		return -EINVAL;
-	}
+	ret = strtobool(val, &v);
+	if (ret)
+		return ret;
 
 	if (kp->flags & KPARAM_ISBOOL)
 		*(bool *)kp->arg = v;
@@ -821,15 +815,18 @@ ssize_t __modver_version_show(struct module_attribute *mattr,
 	return sprintf(buf, "%s\n", vattr->version);
 }
 
-extern struct module_version_attribute __start___modver[], __stop___modver[];
+extern const struct module_version_attribute *__start___modver[];
+extern const struct module_version_attribute *__stop___modver[];
 
 static void __init version_sysfs_builtin(void)
 {
-	const struct module_version_attribute *vattr;
+	const struct module_version_attribute **p;
 	struct module_kobject *mk;
 	int err;
 
-	for (vattr = __start___modver; vattr < __stop___modver; vattr++) {
+	for (p = __start___modver; p < __stop___modver; p++) {
+		const struct module_version_attribute *vattr = *p;
+
 		mk = locate_module_kobject(vattr->module_name);
 		if (mk) {
 			err = sysfs_create_file(&mk->kobj, &vattr->mattr.attr);
diff --git a/kernel/pid.c b/kernel/pid.c
index 02f22127426..57a8346a270 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -217,11 +217,14 @@ static int alloc_pidmap(struct pid_namespace *pid_ns)
 	return -1;
 }
 
-int next_pidmap(struct pid_namespace *pid_ns, int last)
+int next_pidmap(struct pid_namespace *pid_ns, unsigned int last)
 {
 	int offset;
 	struct pidmap *map, *end;
 
+	if (last >= PID_MAX_LIMIT)
+		return -1;
+
 	offset = (last + 1) & BITS_PER_PAGE_MASK;
 	map = &pid_ns->pidmap[(last + 1)/BITS_PER_PAGE];
 	end = &pid_ns->pidmap[PIDMAP_ENTRIES];
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 67fea9d25d5..0791b13df7b 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -1347,7 +1347,7 @@ void run_posix_cpu_timers(struct task_struct *tsk)
 
 	/*
 	 * Now that all the timers on our list have the firing flag,
-	 * noone will touch their list entries but us.  We'll take
+	 * no one will touch their list entries but us.  We'll take
 	 * each timer's lock before clearing its firing flag, so no
 	 * timer call will interfere.
 	 */
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 4c0124919f9..e5498d7405c 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -313,7 +313,7 @@ static void schedule_next_timer(struct k_itimer *timr)
  * restarted (i.e. we have flagged this in the sys_private entry of the
  * info block).
  *
- * To protect aginst the timer going away while the interrupt is queued,
+ * To protect against the timer going away while the interrupt is queued,
  * we require that the it_requeue_pending flag be set.
  */
 void do_schedule_next_timer(struct siginfo *info)
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 4603f08dc47..87f4d24b55b 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -18,9 +18,13 @@ config SUSPEND_FREEZER
 
 	  Turning OFF this setting is NOT recommended! If in doubt, say Y.
 
+config HIBERNATE_CALLBACKS
+	bool
+
 config HIBERNATION
 	bool "Hibernation (aka 'suspend to disk')"
 	depends on SWAP && ARCH_HIBERNATION_POSSIBLE
+	select HIBERNATE_CALLBACKS
 	select LZO_COMPRESS
 	select LZO_DECOMPRESS
 	---help---
@@ -85,7 +89,7 @@ config PM_STD_PARTITION
 
 config PM_SLEEP
 	def_bool y
-	depends on SUSPEND || HIBERNATION || XEN_SAVE_RESTORE
+	depends on SUSPEND || HIBERNATE_CALLBACKS
 
 config PM_SLEEP_SMP
 	def_bool y
@@ -121,12 +125,6 @@ config PM_DEBUG
 	code. This is helpful when debugging and reporting PM bugs, like
 	suspend support.
 
-config PM_VERBOSE
-	bool "Verbose Power Management debugging"
-	depends on PM_DEBUG
-	---help---
-	This option enables verbose messages from the Power Management code.
-
 config PM_ADVANCED_DEBUG
 	bool "Extra PM attributes in sysfs for low-level debugging/testing"
 	depends on PM_DEBUG
@@ -225,3 +223,7 @@ config PM_OPP
 	  representing individual voltage domains and provides SOC
 	  implementations a ready to use framework to manage OPPs.
 	  For more information, read <file:Documentation/power/opp.txt>
+
+config PM_RUNTIME_CLK
+	def_bool y
+	depends on PM_RUNTIME && HAVE_CLK
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index aeabd26e334..f9bec56d882 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -272,9 +272,7 @@ static int create_image(int platform_mode)
 
 	local_irq_disable();
 
-	error = sysdev_suspend(PMSG_FREEZE);
-	if (!error)
-		error = syscore_suspend();
+	error = syscore_suspend();
 	if (error) {
 		printk(KERN_ERR "PM: Some system devices failed to power down, "
 			"aborting hibernation\n");
@@ -299,7 +297,6 @@ static int create_image(int platform_mode)
 
  Power_up:
 	syscore_resume();
-	sysdev_resume();
 	/* NOTE:  dpm_resume_noirq() is just a resume() for devices
 	 * that suspended with irqs off ... no overall powerup.
 	 */
@@ -330,20 +327,25 @@ static int create_image(int platform_mode)
 
 int hibernation_snapshot(int platform_mode)
 {
+	pm_message_t msg = PMSG_RECOVER;
 	int error;
 
 	error = platform_begin(platform_mode);
 	if (error)
 		goto Close;
 
+	error = dpm_prepare(PMSG_FREEZE);
+	if (error)
+		goto Complete_devices;
+
 	/* Preallocate image memory before shutting down devices. */
 	error = hibernate_preallocate_memory();
 	if (error)
-		goto Close;
+		goto Complete_devices;
 
 	suspend_console();
 	pm_restrict_gfp_mask();
-	error = dpm_suspend_start(PMSG_FREEZE);
+	error = dpm_suspend(PMSG_FREEZE);
 	if (error)
 		goto Recover_platform;
 
@@ -361,13 +363,17 @@ int hibernation_snapshot(int platform_mode)
 	if (error || !in_suspend)
 		swsusp_free();
 
-	dpm_resume_end(in_suspend ?
-		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
+	msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
+	dpm_resume(msg);
 
 	if (error || !in_suspend)
 		pm_restore_gfp_mask();
 
 	resume_console();
+
+ Complete_devices:
+	dpm_complete(msg);
+
  Close:
 	platform_end(platform_mode);
 	return error;
@@ -406,9 +412,7 @@ static int resume_target_kernel(bool platform_mode)
 
 	local_irq_disable();
 
-	error = sysdev_suspend(PMSG_QUIESCE);
-	if (!error)
-		error = syscore_suspend();
+	error = syscore_suspend();
 	if (error)
 		goto Enable_irqs;
 
@@ -436,7 +440,6 @@ static int resume_target_kernel(bool platform_mode)
 	touch_softlockup_watchdog();
 
 	syscore_resume();
-	sysdev_resume();
 
  Enable_irqs:
 	local_irq_enable();
@@ -522,7 +525,6 @@ int hibernation_platform_enter(void)
 		goto Platform_finish;
 
 	local_irq_disable();
-	sysdev_suspend(PMSG_HIBERNATE);
 	syscore_suspend();
 	if (pm_wakeup_pending()) {
 		error = -EAGAIN;
@@ -535,7 +537,6 @@ int hibernation_platform_enter(void)
 
  Power_up:
 	syscore_resume();
-	sysdev_resume();
 	local_irq_enable();
 	enable_nonboot_cpus();
 
@@ -976,10 +977,33 @@ static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *att
 
 power_attr(image_size);
 
+static ssize_t reserved_size_show(struct kobject *kobj,
+				  struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lu\n", reserved_size);
+}
+
+static ssize_t reserved_size_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	unsigned long size;
+
+	if (sscanf(buf, "%lu", &size) == 1) {
+		reserved_size = size;
+		return n;
+	}
+
+	return -EINVAL;
+}
+
+power_attr(reserved_size);
+
 static struct attribute * g[] = {
 	&disk_attr.attr,
 	&resume_attr.attr,
 	&image_size_attr.attr,
+	&reserved_size_attr.attr,
 	NULL,
 };
 
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 8eaba5f27b1..2981af4ce7c 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -224,7 +224,7 @@ power_attr(state);
  * writing to 'state'.  It first should read from 'wakeup_count' and store
  * the read value.  Then, after carrying out its own preparations for the system
  * transition to a sleep state, it should write the stored value to
- * 'wakeup_count'.  If that fails, at least one wakeup event has occured since
+ * 'wakeup_count'.  If that fails, at least one wakeup event has occurred since
  * 'wakeup_count' was read and 'state' should not be written to.  Otherwise, it
  * is allowed to write to 'state', but the transition will be aborted if there
  * are any wakeup events detected after 'wakeup_count' was written to.
@@ -337,6 +337,7 @@ static int __init pm_init(void)
 	if (error)
 		return error;
 	hibernate_image_size_init();
+	hibernate_reserved_size_init();
 	power_kobj = kobject_create_and_add("power", NULL);
 	if (!power_kobj)
 		return -ENOMEM;
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 03634be55f6..9a00a0a2628 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -15,6 +15,7 @@ struct swsusp_info {
 
 #ifdef CONFIG_HIBERNATION
 /* kernel/power/snapshot.c */
+extern void __init hibernate_reserved_size_init(void);
 extern void __init hibernate_image_size_init(void);
 
 #ifdef CONFIG_ARCH_HIBERNATION_HEADER
@@ -55,6 +56,7 @@ extern int hibernation_platform_enter(void);
 
 #else /* !CONFIG_HIBERNATION */
 
+static inline void hibernate_reserved_size_init(void) {}
 static inline void hibernate_image_size_init(void) {}
 #endif /* !CONFIG_HIBERNATION */
 
@@ -72,6 +74,8 @@ static struct kobj_attribute _name##_attr = {	\
 
 /* Preferred image size in bytes (default 500 MB) */
 extern unsigned long image_size;
+/* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */
+extern unsigned long reserved_size;
 extern int in_suspend;
 extern dev_t swsusp_resume_device;
 extern sector_t swsusp_resume_block;
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index ca0aacc2487..ace55889f70 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -41,16 +41,28 @@ static void swsusp_set_page_forbidden(struct page *);
 static void swsusp_unset_page_forbidden(struct page *);
 
 /*
+ * Number of bytes to reserve for memory allocations made by device drivers
+ * from their ->freeze() and ->freeze_noirq() callbacks so that they don't
+ * cause image creation to fail (tunable via /sys/power/reserved_size).
+ */
+unsigned long reserved_size;
+
+void __init hibernate_reserved_size_init(void)
+{
+	reserved_size = SPARE_PAGES * PAGE_SIZE;
+}
+
+/*
  * Preferred image size in bytes (tunable via /sys/power/image_size).
- * When it is set to N, the image creating code will do its best to
- * ensure the image size will not exceed N bytes, but if that is
- * impossible, it will try to create the smallest image possible.
+ * When it is set to N, swsusp will do its best to ensure the image
+ * size will not exceed N bytes, but if that is impossible, it will
+ * try to create the smallest image possible.
  */
 unsigned long image_size;
 
 void __init hibernate_image_size_init(void)
 {
-	image_size = (totalram_pages / 3) * PAGE_SIZE;
+	image_size = ((totalram_pages * 2) / 5) * PAGE_SIZE;
 }
 
 /* List of PBEs needed for restoring the pages that were allocated before
@@ -1263,11 +1275,13 @@ static unsigned long minimum_image_size(unsigned long saveable)
  * frame in use.  We also need a number of page frames to be free during
  * hibernation for allocations made while saving the image and for device
  * drivers, in case they need to allocate memory from their hibernation
- * callbacks (these two numbers are given by PAGES_FOR_IO and SPARE_PAGES,
- * respectively, both of which are rough estimates).  To make this happen, we
- * compute the total number of available page frames and allocate at least
+ * callbacks (these two numbers are given by PAGES_FOR_IO (which is a rough
+ * estimate) and reserverd_size divided by PAGE_SIZE (which is tunable through
+ * /sys/power/reserved_size, respectively).  To make this happen, we compute the
+ * total number of available page frames and allocate at least
  *
- * ([page frames total] + PAGES_FOR_IO + [metadata pages]) / 2 + 2 * SPARE_PAGES
+ * ([page frames total] + PAGES_FOR_IO + [metadata pages]) / 2
+ *  + 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE)
  *
  * of them, which corresponds to the maximum size of a hibernation image.
  *
@@ -1322,7 +1336,8 @@ int hibernate_preallocate_memory(void)
 	count -= totalreserve_pages;
 
 	/* Compute the maximum number of saveable pages to leave in memory. */
-	max_size = (count - (size + PAGES_FOR_IO)) / 2 - 2 * SPARE_PAGES;
+	max_size = (count - (size + PAGES_FOR_IO)) / 2
+			- 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);
 	/* Compute the desired number of image pages specified by image_size. */
 	size = DIV_ROUND_UP(image_size, PAGE_SIZE);
 	if (size > max_size)
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 2814c32aed5..1c41ba21541 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -163,16 +163,13 @@ static int suspend_enter(suspend_state_t state)
 	arch_suspend_disable_irqs();
 	BUG_ON(!irqs_disabled());
 
-	error = sysdev_suspend(PMSG_SUSPEND);
-	if (!error)
-		error = syscore_suspend();
+	error = syscore_suspend();
 	if (!error) {
 		if (!(suspend_test(TEST_CORE) || pm_wakeup_pending())) {
 			error = suspend_ops->enter(state);
 			events_check_enabled = false;
 		}
 		syscore_resume();
-		sysdev_resume();
 	}
 
 	arch_suspend_enable_irqs();
@@ -213,7 +210,6 @@ int suspend_devices_and_enter(suspend_state_t state)
 			goto Close;
 	}
 	suspend_console();
-	pm_restrict_gfp_mask();
 	suspend_test_start();
 	error = dpm_suspend_start(PMSG_SUSPEND);
 	if (error) {
@@ -224,13 +220,12 @@ int suspend_devices_and_enter(suspend_state_t state)
 	if (suspend_test(TEST_DEVICES))
 		goto Recover_platform;
 
-	suspend_enter(state);
+	error = suspend_enter(state);
 
  Resume_devices:
 	suspend_test_start();
 	dpm_resume_end(PMSG_RESUME);
 	suspend_test_finish("resume devices");
-	pm_restore_gfp_mask();
 	resume_console();
  Close:
 	if (suspend_ops->end)
@@ -291,7 +286,9 @@ int enter_state(suspend_state_t state)
 		goto Finish;
 
 	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
+	pm_restrict_gfp_mask();
 	error = suspend_devices_and_enter(state);
+	pm_restore_gfp_mask();
 
  Finish:
 	pr_debug("PM: Finishing wakeup.\n");
diff --git a/kernel/power/user.c b/kernel/power/user.c
index c36c3b9e8a8..7d02d33be69 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -135,8 +135,10 @@ static int snapshot_release(struct inode *inode, struct file *filp)
 	free_basic_memory_bitmaps();
 	data = filp->private_data;
 	free_all_swap_pages(data->swap);
-	if (data->frozen)
+	if (data->frozen) {
+		pm_restore_gfp_mask();
 		thaw_processes();
+	}
 	pm_notifier_call_chain(data->mode == O_RDONLY ?
 			PM_POST_HIBERNATION : PM_POST_RESTORE);
 	atomic_inc(&snapshot_device_available);
@@ -379,6 +381,7 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd,
 		 * PM_HIBERNATION_PREPARE
 		 */
 		error = suspend_devices_and_enter(PM_SUSPEND_MEM);
+		data->ready = 0;
 		break;
 
 	case SNAPSHOT_PLATFORM_SUPPORT:
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 0fc1eed28d2..7a81fc07134 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
 #include <linux/regset.h>
+#include <linux/hw_breakpoint.h>
 
 
 /*
@@ -37,35 +38,33 @@ void __ptrace_link(struct task_struct *child, struct task_struct *new_parent)
 	child->parent = new_parent;
 }
 
-/*
- * Turn a tracing stop into a normal stop now, since with no tracer there
- * would be no way to wake it up with SIGCONT or SIGKILL.  If there was a
- * signal sent that would resume the child, but didn't because it was in
- * TASK_TRACED, resume it now.
- * Requires that irqs be disabled.
- */
-static void ptrace_untrace(struct task_struct *child)
-{
-	spin_lock(&child->sighand->siglock);
-	if (task_is_traced(child)) {
-		/*
-		 * If the group stop is completed or in progress,
-		 * this thread was already counted as stopped.
-		 */
-		if (child->signal->flags & SIGNAL_STOP_STOPPED ||
-		    child->signal->group_stop_count)
-			__set_task_state(child, TASK_STOPPED);
-		else
-			signal_wake_up(child, 1);
-	}
-	spin_unlock(&child->sighand->siglock);
-}
-
-/*
- * unptrace a task: move it back to its original parent and
- * remove it from the ptrace list.
+/**
+ * __ptrace_unlink - unlink ptracee and restore its execution state
+ * @child: ptracee to be unlinked
  *
- * Must be called with the tasklist lock write-held.
+ * Remove @child from the ptrace list, move it back to the original parent,
+ * and restore the execution state so that it conforms to the group stop
+ * state.
+ *
+ * Unlinking can happen via two paths - explicit PTRACE_DETACH or ptracer
+ * exiting.  For PTRACE_DETACH, unless the ptracee has been killed between
+ * ptrace_check_attach() and here, it's guaranteed to be in TASK_TRACED.
+ * If the ptracer is exiting, the ptracee can be in any state.
+ *
+ * After detach, the ptracee should be in a state which conforms to the
+ * group stop.  If the group is stopped or in the process of stopping, the
+ * ptracee should be put into TASK_STOPPED; otherwise, it should be woken
+ * up from TASK_TRACED.
+ *
+ * If the ptracee is in TASK_TRACED and needs to be moved to TASK_STOPPED,
+ * it goes through TRACED -> RUNNING -> STOPPED transition which is similar
+ * to but in the opposite direction of what happens while attaching to a
+ * stopped task.  However, in this direction, the intermediate RUNNING
+ * state is not hidden even from the current ptracer and if it immediately
+ * re-attaches and performs a WNOHANG wait(2), it may fail.
+ *
+ * CONTEXT:
+ * write_lock_irq(tasklist_lock)
  */
 void __ptrace_unlink(struct task_struct *child)
 {
@@ -75,8 +74,27 @@ void __ptrace_unlink(struct task_struct *child)
 	child->parent = child->real_parent;
 	list_del_init(&child->ptrace_entry);
 
-	if (task_is_traced(child))
-		ptrace_untrace(child);
+	spin_lock(&child->sighand->siglock);
+
+	/*
+	 * Reinstate GROUP_STOP_PENDING if group stop is in effect and
+	 * @child isn't dead.
+	 */
+	if (!(child->flags & PF_EXITING) &&
+	    (child->signal->flags & SIGNAL_STOP_STOPPED ||
+	     child->signal->group_stop_count))
+		child->group_stop |= GROUP_STOP_PENDING;
+
+	/*
+	 * If transition to TASK_STOPPED is pending or in TASK_TRACED, kick
+	 * @child in the butt.  Note that @resume should be used iff @child
+	 * is in TASK_TRACED; otherwise, we might unduly disrupt
+	 * TASK_KILLABLE sleeps.
+	 */
+	if (child->group_stop & GROUP_STOP_PENDING || task_is_traced(child))
+		signal_wake_up(child, task_is_traced(child));
+
+	spin_unlock(&child->sighand->siglock);
 }
 
 /*
@@ -95,16 +113,14 @@ int ptrace_check_attach(struct task_struct *child, int kill)
 	 */
 	read_lock(&tasklist_lock);
 	if ((child->ptrace & PT_PTRACED) && child->parent == current) {
-		ret = 0;
 		/*
 		 * child->sighand can't be NULL, release_task()
 		 * does ptrace_unlink() before __exit_signal().
 		 */
 		spin_lock_irq(&child->sighand->siglock);
-		if (task_is_stopped(child))
-			child->state = TASK_TRACED;
-		else if (!task_is_traced(child) && !kill)
-			ret = -ESRCH;
+		WARN_ON_ONCE(task_is_stopped(child));
+		if (task_is_traced(child) || kill)
+			ret = 0;
 		spin_unlock_irq(&child->sighand->siglock);
 	}
 	read_unlock(&tasklist_lock);
@@ -168,6 +184,7 @@ bool ptrace_may_access(struct task_struct *task, unsigned int mode)
 
 static int ptrace_attach(struct task_struct *task)
 {
+	bool wait_trap = false;
 	int retval;
 
 	audit_ptrace(task);
@@ -207,12 +224,42 @@ static int ptrace_attach(struct task_struct *task)
 	__ptrace_link(task, current);
 	send_sig_info(SIGSTOP, SEND_SIG_FORCED, task);
 
+	spin_lock(&task->sighand->siglock);
+
+	/*
+	 * If the task is already STOPPED, set GROUP_STOP_PENDING and
+	 * TRAPPING, and kick it so that it transits to TRACED.  TRAPPING
+	 * will be cleared if the child completes the transition or any
+	 * event which clears the group stop states happens.  We'll wait
+	 * for the transition to complete before returning from this
+	 * function.
+	 *
+	 * This hides STOPPED -> RUNNING -> TRACED transition from the
+	 * attaching thread but a different thread in the same group can
+	 * still observe the transient RUNNING state.  IOW, if another
+	 * thread's WNOHANG wait(2) on the stopped tracee races against
+	 * ATTACH, the wait(2) may fail due to the transient RUNNING.
+	 *
+	 * The following task_is_stopped() test is safe as both transitions
+	 * in and out of STOPPED are protected by siglock.
+	 */
+	if (task_is_stopped(task)) {
+		task->group_stop |= GROUP_STOP_PENDING | GROUP_STOP_TRAPPING;
+		signal_wake_up(task, 1);
+		wait_trap = true;
+	}
+
+	spin_unlock(&task->sighand->siglock);
+
 	retval = 0;
 unlock_tasklist:
 	write_unlock_irq(&tasklist_lock);
 unlock_creds:
 	mutex_unlock(&task->signal->cred_guard_mutex);
 out:
+	if (wait_trap)
+		wait_event(current->signal->wait_chldexit,
+			   !(task->group_stop & GROUP_STOP_TRAPPING));
 	return retval;
 }
 
@@ -315,8 +362,6 @@ static int ptrace_detach(struct task_struct *child, unsigned int data)
 	if (child->ptrace) {
 		child->exit_code = data;
 		dead = __ptrace_detach(current, child);
-		if (!child->exit_state)
-			wake_up_state(child, TASK_TRACED | TASK_STOPPED);
 	}
 	write_unlock_irq(&tasklist_lock);
 
@@ -879,3 +924,19 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
 	return ret;
 }
 #endif	/* CONFIG_COMPAT */
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+int ptrace_get_breakpoints(struct task_struct *tsk)
+{
+	if (atomic_inc_not_zero(&tsk->ptrace_bp_refcnt))
+		return 0;
+
+	return -1;
+}
+
+void ptrace_put_breakpoints(struct task_struct *tsk)
+{
+	if (atomic_dec_and_test(&tsk->ptrace_bp_refcnt))
+		flush_ptrace_hw_breakpoint(tsk);
+}
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index f3240e98792..7784bd216b6 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -142,10 +142,17 @@ static int rcuhead_fixup_init(void *addr, enum debug_obj_state state)
 		 * Ensure that queued callbacks are all executed.
 		 * If we detect that we are nested in a RCU read-side critical
 		 * section, we should simply fail, otherwise we would deadlock.
+		 * In !PREEMPT configurations, there is no way to tell if we are
+		 * in a RCU read-side critical section or not, so we never
+		 * attempt any fixup and just print a warning.
 		 */
+#ifndef CONFIG_PREEMPT
+		WARN_ON_ONCE(1);
+		return 0;
+#endif
 		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
 		    irqs_disabled()) {
-			WARN_ON(1);
+			WARN_ON_ONCE(1);
 			return 0;
 		}
 		rcu_barrier();
@@ -184,10 +191,17 @@ static int rcuhead_fixup_activate(void *addr, enum debug_obj_state state)
 		 * Ensure that queued callbacks are all executed.
 		 * If we detect that we are nested in a RCU read-side critical
 		 * section, we should simply fail, otherwise we would deadlock.
+		 * In !PREEMPT configurations, there is no way to tell if we are
+		 * in a RCU read-side critical section or not, so we never
+		 * attempt any fixup and just print a warning.
 		 */
+#ifndef CONFIG_PREEMPT
+		WARN_ON_ONCE(1);
+		return 0;
+#endif
 		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
 		    irqs_disabled()) {
-			WARN_ON(1);
+			WARN_ON_ONCE(1);
 			return 0;
 		}
 		rcu_barrier();
@@ -214,15 +228,17 @@ static int rcuhead_fixup_free(void *addr, enum debug_obj_state state)
 		 * Ensure that queued callbacks are all executed.
 		 * If we detect that we are nested in a RCU read-side critical
 		 * section, we should simply fail, otherwise we would deadlock.
-		 * Note that the machinery to reliably determine whether
-		 * or not we are in an RCU read-side critical section
-		 * exists only in the preemptible RCU implementations
-		 * (TINY_PREEMPT_RCU and TREE_PREEMPT_RCU), which is why
-		 * DEBUG_OBJECTS_RCU_HEAD is disallowed if !PREEMPT.
+		 * In !PREEMPT configurations, there is no way to tell if we are
+		 * in a RCU read-side critical section or not, so we never
+		 * attempt any fixup and just print a warning.
 		 */
+#ifndef CONFIG_PREEMPT
+		WARN_ON_ONCE(1);
+		return 0;
+#endif
 		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
 		    irqs_disabled()) {
-			WARN_ON(1);
+			WARN_ON_ONCE(1);
 			return 0;
 		}
 		rcu_barrier();
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
index 0c343b9a46d..7bbac7d0f5a 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcutiny.c
@@ -35,15 +35,16 @@
 #include <linux/init.h>
 #include <linux/time.h>
 #include <linux/cpu.h>
+#include <linux/prefetch.h>
 
 /* Controls for rcu_kthread() kthread, replacing RCU_SOFTIRQ used previously. */
 static struct task_struct *rcu_kthread_task;
 static DECLARE_WAIT_QUEUE_HEAD(rcu_kthread_wq);
 static unsigned long have_rcu_kthread_work;
-static void invoke_rcu_kthread(void);
 
 /* Forward declarations for rcutiny_plugin.h. */
 struct rcu_ctrlblk;
+static void invoke_rcu_kthread(void);
 static void rcu_process_callbacks(struct rcu_ctrlblk *rcp);
 static int rcu_kthread(void *arg);
 static void __call_rcu(struct rcu_head *head,
@@ -79,36 +80,45 @@ void rcu_exit_nohz(void)
 #endif /* #ifdef CONFIG_NO_HZ */
 
 /*
- * Helper function for rcu_qsctr_inc() and rcu_bh_qsctr_inc().
- * Also disable irqs to avoid confusion due to interrupt handlers
+ * Helper function for rcu_sched_qs() and rcu_bh_qs().
+ * Also irqs are disabled to avoid confusion due to interrupt handlers
  * invoking call_rcu().
  */
 static int rcu_qsctr_help(struct rcu_ctrlblk *rcp)
 {
-	unsigned long flags;
-
-	local_irq_save(flags);
 	if (rcp->rcucblist != NULL &&
 	    rcp->donetail != rcp->curtail) {
 		rcp->donetail = rcp->curtail;
-		local_irq_restore(flags);
 		return 1;
 	}
-	local_irq_restore(flags);
 
 	return 0;
 }
 
 /*
+ * Wake up rcu_kthread() to process callbacks now eligible for invocation
+ * or to boost readers.
+ */
+static void invoke_rcu_kthread(void)
+{
+	have_rcu_kthread_work = 1;
+	wake_up(&rcu_kthread_wq);
+}
+
+/*
  * Record an rcu quiescent state.  And an rcu_bh quiescent state while we
  * are at it, given that any rcu quiescent state is also an rcu_bh
  * quiescent state.  Use "+" instead of "||" to defeat short circuiting.
  */
 void rcu_sched_qs(int cpu)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	if (rcu_qsctr_help(&rcu_sched_ctrlblk) +
 	    rcu_qsctr_help(&rcu_bh_ctrlblk))
 		invoke_rcu_kthread();
+	local_irq_restore(flags);
 }
 
 /*
@@ -116,8 +126,12 @@ void rcu_sched_qs(int cpu)
  */
 void rcu_bh_qs(int cpu)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	if (rcu_qsctr_help(&rcu_bh_ctrlblk))
 		invoke_rcu_kthread();
+	local_irq_restore(flags);
 }
 
 /*
@@ -167,7 +181,7 @@ static void rcu_process_callbacks(struct rcu_ctrlblk *rcp)
 		prefetch(next);
 		debug_rcu_head_unqueue(list);
 		local_bh_disable();
-		list->func(list);
+		__rcu_reclaim(list);
 		local_bh_enable();
 		list = next;
 		RCU_TRACE(cb_count++);
@@ -208,20 +222,6 @@ static int rcu_kthread(void *arg)
 }
 
 /*
- * Wake up rcu_kthread() to process callbacks now eligible for invocation
- * or to boost readers.
- */
-static void invoke_rcu_kthread(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	have_rcu_kthread_work = 1;
-	wake_up(&rcu_kthread_wq);
-	local_irq_restore(flags);
-}
-
-/*
  * Wait for a grace period to elapse.  But it is illegal to invoke
  * synchronize_sched() from within an RCU read-side critical section.
  * Therefore, any legal call to synchronize_sched() is a quiescent
diff --git a/kernel/rcutiny_plugin.h b/kernel/rcutiny_plugin.h
index 3cb8e362e88..f259c676195 100644
--- a/kernel/rcutiny_plugin.h
+++ b/kernel/rcutiny_plugin.h
@@ -100,23 +100,28 @@ struct rcu_preempt_ctrlblk {
 	u8 completed;		/* Last grace period completed. */
 				/*  If all three are equal, RCU is idle. */
 #ifdef CONFIG_RCU_BOOST
-	s8 boosted_this_gp;	/* Has boosting already happened? */
 	unsigned long boost_time; /* When to start boosting (jiffies) */
 #endif /* #ifdef CONFIG_RCU_BOOST */
 #ifdef CONFIG_RCU_TRACE
 	unsigned long n_grace_periods;
 #ifdef CONFIG_RCU_BOOST
 	unsigned long n_tasks_boosted;
+				/* Total number of tasks boosted. */
 	unsigned long n_exp_boosts;
+				/* Number of tasks boosted for expedited GP. */
 	unsigned long n_normal_boosts;
-	unsigned long n_normal_balk_blkd_tasks;
-	unsigned long n_normal_balk_gp_tasks;
-	unsigned long n_normal_balk_boost_tasks;
-	unsigned long n_normal_balk_boosted;
-	unsigned long n_normal_balk_notyet;
-	unsigned long n_normal_balk_nos;
-	unsigned long n_exp_balk_blkd_tasks;
-	unsigned long n_exp_balk_nos;
+				/* Number of tasks boosted for normal GP. */
+	unsigned long n_balk_blkd_tasks;
+				/* Refused to boost: no blocked tasks. */
+	unsigned long n_balk_exp_gp_tasks;
+				/* Refused to boost: nothing blocking GP. */
+	unsigned long n_balk_boost_tasks;
+				/* Refused to boost: already boosting. */
+	unsigned long n_balk_notyet;
+				/* Refused to boost: not yet time. */
+	unsigned long n_balk_nos;
+				/* Refused to boost: not sure why, though. */
+				/*  This can happen due to race conditions. */
 #endif /* #ifdef CONFIG_RCU_BOOST */
 #endif /* #ifdef CONFIG_RCU_TRACE */
 };
@@ -201,7 +206,6 @@ static struct list_head *rcu_next_node_entry(struct task_struct *t)
 
 #ifdef CONFIG_RCU_BOOST
 static void rcu_initiate_boost_trace(void);
-static void rcu_initiate_exp_boost_trace(void);
 #endif /* #ifdef CONFIG_RCU_BOOST */
 
 /*
@@ -219,41 +223,21 @@ static void show_tiny_preempt_stats(struct seq_file *m)
 		   "N."[!rcu_preempt_ctrlblk.gp_tasks],
 		   "E."[!rcu_preempt_ctrlblk.exp_tasks]);
 #ifdef CONFIG_RCU_BOOST
-	seq_printf(m, "             ttb=%c btg=",
-		   "B."[!rcu_preempt_ctrlblk.boost_tasks]);
-	switch (rcu_preempt_ctrlblk.boosted_this_gp) {
-	case -1:
-		seq_puts(m, "exp");
-		break;
-	case 0:
-		seq_puts(m, "no");
-		break;
-	case 1:
-		seq_puts(m, "begun");
-		break;
-	case 2:
-		seq_puts(m, "done");
-		break;
-	default:
-		seq_printf(m, "?%d?", rcu_preempt_ctrlblk.boosted_this_gp);
-	}
-	seq_printf(m, " ntb=%lu neb=%lu nnb=%lu j=%04x bt=%04x\n",
+	seq_printf(m, "%sttb=%c ntb=%lu neb=%lu nnb=%lu j=%04x bt=%04x\n",
+		   "             ",
+		   "B."[!rcu_preempt_ctrlblk.boost_tasks],
 		   rcu_preempt_ctrlblk.n_tasks_boosted,
 		   rcu_preempt_ctrlblk.n_exp_boosts,
 		   rcu_preempt_ctrlblk.n_normal_boosts,
 		   (int)(jiffies & 0xffff),
 		   (int)(rcu_preempt_ctrlblk.boost_time & 0xffff));
-	seq_printf(m, "             %s: nt=%lu gt=%lu bt=%lu b=%lu ny=%lu nos=%lu\n",
-		   "normal balk",
-		   rcu_preempt_ctrlblk.n_normal_balk_blkd_tasks,
-		   rcu_preempt_ctrlblk.n_normal_balk_gp_tasks,
-		   rcu_preempt_ctrlblk.n_normal_balk_boost_tasks,
-		   rcu_preempt_ctrlblk.n_normal_balk_boosted,
-		   rcu_preempt_ctrlblk.n_normal_balk_notyet,
-		   rcu_preempt_ctrlblk.n_normal_balk_nos);
-	seq_printf(m, "             exp balk: bt=%lu nos=%lu\n",
-		   rcu_preempt_ctrlblk.n_exp_balk_blkd_tasks,
-		   rcu_preempt_ctrlblk.n_exp_balk_nos);
+	seq_printf(m, "%s: nt=%lu egt=%lu bt=%lu ny=%lu nos=%lu\n",
+		   "             balk",
+		   rcu_preempt_ctrlblk.n_balk_blkd_tasks,
+		   rcu_preempt_ctrlblk.n_balk_exp_gp_tasks,
+		   rcu_preempt_ctrlblk.n_balk_boost_tasks,
+		   rcu_preempt_ctrlblk.n_balk_notyet,
+		   rcu_preempt_ctrlblk.n_balk_nos);
 #endif /* #ifdef CONFIG_RCU_BOOST */
 }
 
@@ -271,25 +255,59 @@ static int rcu_boost(void)
 {
 	unsigned long flags;
 	struct rt_mutex mtx;
-	struct list_head *np;
 	struct task_struct *t;
+	struct list_head *tb;
 
-	if (rcu_preempt_ctrlblk.boost_tasks == NULL)
+	if (rcu_preempt_ctrlblk.boost_tasks == NULL &&
+	    rcu_preempt_ctrlblk.exp_tasks == NULL)
 		return 0;  /* Nothing to boost. */
+
 	raw_local_irq_save(flags);
-	rcu_preempt_ctrlblk.boosted_this_gp++;
-	t = container_of(rcu_preempt_ctrlblk.boost_tasks, struct task_struct,
-			 rcu_node_entry);
-	np = rcu_next_node_entry(t);
+
+	/*
+	 * Recheck with irqs disabled: all tasks in need of boosting
+	 * might exit their RCU read-side critical sections on their own
+	 * if we are preempted just before disabling irqs.
+	 */
+	if (rcu_preempt_ctrlblk.boost_tasks == NULL &&
+	    rcu_preempt_ctrlblk.exp_tasks == NULL) {
+		raw_local_irq_restore(flags);
+		return 0;
+	}
+
+	/*
+	 * Preferentially boost tasks blocking expedited grace periods.
+	 * This cannot starve the normal grace periods because a second
+	 * expedited grace period must boost all blocked tasks, including
+	 * those blocking the pre-existing normal grace period.
+	 */
+	if (rcu_preempt_ctrlblk.exp_tasks != NULL) {
+		tb = rcu_preempt_ctrlblk.exp_tasks;
+		RCU_TRACE(rcu_preempt_ctrlblk.n_exp_boosts++);
+	} else {
+		tb = rcu_preempt_ctrlblk.boost_tasks;
+		RCU_TRACE(rcu_preempt_ctrlblk.n_normal_boosts++);
+	}
+	RCU_TRACE(rcu_preempt_ctrlblk.n_tasks_boosted++);
+
+	/*
+	 * We boost task t by manufacturing an rt_mutex that appears to
+	 * be held by task t.  We leave a pointer to that rt_mutex where
+	 * task t can find it, and task t will release the mutex when it
+	 * exits its outermost RCU read-side critical section.  Then
+	 * simply acquiring this artificial rt_mutex will boost task
+	 * t's priority.  (Thanks to tglx for suggesting this approach!)
+	 */
+	t = container_of(tb, struct task_struct, rcu_node_entry);
 	rt_mutex_init_proxy_locked(&mtx, t);
 	t->rcu_boost_mutex = &mtx;
 	t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BOOSTED;
 	raw_local_irq_restore(flags);
 	rt_mutex_lock(&mtx);
-	RCU_TRACE(rcu_preempt_ctrlblk.n_tasks_boosted++);
-	rcu_preempt_ctrlblk.boosted_this_gp++;
-	rt_mutex_unlock(&mtx);
-	return rcu_preempt_ctrlblk.boost_tasks != NULL;
+	rt_mutex_unlock(&mtx);  /* Keep lockdep happy. */
+
+	return rcu_preempt_ctrlblk.boost_tasks != NULL ||
+	       rcu_preempt_ctrlblk.exp_tasks != NULL;
 }
 
 /*
@@ -304,42 +322,25 @@ static int rcu_boost(void)
  */
 static int rcu_initiate_boost(void)
 {
-	if (!rcu_preempt_blocked_readers_cgp()) {
-		RCU_TRACE(rcu_preempt_ctrlblk.n_normal_balk_blkd_tasks++);
+	if (!rcu_preempt_blocked_readers_cgp() &&
+	    rcu_preempt_ctrlblk.exp_tasks == NULL) {
+		RCU_TRACE(rcu_preempt_ctrlblk.n_balk_exp_gp_tasks++);
 		return 0;
 	}
-	if (rcu_preempt_ctrlblk.gp_tasks != NULL &&
-	    rcu_preempt_ctrlblk.boost_tasks == NULL &&
-	    rcu_preempt_ctrlblk.boosted_this_gp == 0 &&
-	    ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time)) {
-		rcu_preempt_ctrlblk.boost_tasks = rcu_preempt_ctrlblk.gp_tasks;
+	if (rcu_preempt_ctrlblk.exp_tasks != NULL ||
+	    (rcu_preempt_ctrlblk.gp_tasks != NULL &&
+	     rcu_preempt_ctrlblk.boost_tasks == NULL &&
+	     ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time))) {
+		if (rcu_preempt_ctrlblk.exp_tasks == NULL)
+			rcu_preempt_ctrlblk.boost_tasks =
+				rcu_preempt_ctrlblk.gp_tasks;
 		invoke_rcu_kthread();
-		RCU_TRACE(rcu_preempt_ctrlblk.n_normal_boosts++);
 	} else
 		RCU_TRACE(rcu_initiate_boost_trace());
 	return 1;
 }
 
-/*
- * Initiate boosting for an expedited grace period.
- */
-static void rcu_initiate_expedited_boost(void)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if (!list_empty(&rcu_preempt_ctrlblk.blkd_tasks)) {
-		rcu_preempt_ctrlblk.boost_tasks =
-			rcu_preempt_ctrlblk.blkd_tasks.next;
-		rcu_preempt_ctrlblk.boosted_this_gp = -1;
-		invoke_rcu_kthread();
-		RCU_TRACE(rcu_preempt_ctrlblk.n_exp_boosts++);
-	} else
-		RCU_TRACE(rcu_initiate_exp_boost_trace());
-	raw_local_irq_restore(flags);
-}
-
-#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000);
+#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000)
 
 /*
  * Do priority-boost accounting for the start of a new grace period.
@@ -347,8 +348,6 @@ static void rcu_initiate_expedited_boost(void)
 static void rcu_preempt_boost_start_gp(void)
 {
 	rcu_preempt_ctrlblk.boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES;
-	if (rcu_preempt_ctrlblk.boosted_this_gp > 0)
-		rcu_preempt_ctrlblk.boosted_this_gp = 0;
 }
 
 #else /* #ifdef CONFIG_RCU_BOOST */
@@ -372,13 +371,6 @@ static int rcu_initiate_boost(void)
 }
 
 /*
- * If there is no RCU priority boosting, we don't initiate expedited boosting.
- */
-static void rcu_initiate_expedited_boost(void)
-{
-}
-
-/*
  * If there is no RCU priority boosting, nothing to do at grace-period start.
  */
 static void rcu_preempt_boost_start_gp(void)
@@ -418,7 +410,7 @@ static void rcu_preempt_cpu_qs(void)
 	if (!rcu_preempt_gp_in_progress())
 		return;
 	/*
-	 * Check up on boosting.  If there are no readers blocking the
+	 * Check up on boosting.  If there are readers blocking the
 	 * current grace period, leave.
 	 */
 	if (rcu_initiate_boost())
@@ -578,7 +570,7 @@ static void rcu_read_unlock_special(struct task_struct *t)
 		empty = !rcu_preempt_blocked_readers_cgp();
 		empty_exp = rcu_preempt_ctrlblk.exp_tasks == NULL;
 		np = rcu_next_node_entry(t);
-		list_del(&t->rcu_node_entry);
+		list_del_init(&t->rcu_node_entry);
 		if (&t->rcu_node_entry == rcu_preempt_ctrlblk.gp_tasks)
 			rcu_preempt_ctrlblk.gp_tasks = np;
 		if (&t->rcu_node_entry == rcu_preempt_ctrlblk.exp_tasks)
@@ -587,7 +579,6 @@ static void rcu_read_unlock_special(struct task_struct *t)
 		if (&t->rcu_node_entry == rcu_preempt_ctrlblk.boost_tasks)
 			rcu_preempt_ctrlblk.boost_tasks = np;
 #endif /* #ifdef CONFIG_RCU_BOOST */
-		INIT_LIST_HEAD(&t->rcu_node_entry);
 
 		/*
 		 * If this was the last task on the current list, and if
@@ -812,13 +803,16 @@ void synchronize_rcu_expedited(void)
 	rpcp->exp_tasks = rpcp->blkd_tasks.next;
 	if (rpcp->exp_tasks == &rpcp->blkd_tasks)
 		rpcp->exp_tasks = NULL;
-	local_irq_restore(flags);
 
 	/* Wait for tail of ->blkd_tasks list to drain. */
-	if (rcu_preempted_readers_exp())
-		rcu_initiate_expedited_boost();
+	if (!rcu_preempted_readers_exp())
+		local_irq_restore(flags);
+	else {
+		rcu_initiate_boost();
+		local_irq_restore(flags);
 		wait_event(sync_rcu_preempt_exp_wq,
 			   !rcu_preempted_readers_exp());
+	}
 
 	/* Clean up and exit. */
 	barrier(); /* ensure expedited GP seen before counter increment. */
@@ -931,24 +925,17 @@ void __init rcu_scheduler_starting(void)
 
 static void rcu_initiate_boost_trace(void)
 {
-	if (rcu_preempt_ctrlblk.gp_tasks == NULL)
-		rcu_preempt_ctrlblk.n_normal_balk_gp_tasks++;
+	if (list_empty(&rcu_preempt_ctrlblk.blkd_tasks))
+		rcu_preempt_ctrlblk.n_balk_blkd_tasks++;
+	else if (rcu_preempt_ctrlblk.gp_tasks == NULL &&
+		 rcu_preempt_ctrlblk.exp_tasks == NULL)
+		rcu_preempt_ctrlblk.n_balk_exp_gp_tasks++;
 	else if (rcu_preempt_ctrlblk.boost_tasks != NULL)
-		rcu_preempt_ctrlblk.n_normal_balk_boost_tasks++;
-	else if (rcu_preempt_ctrlblk.boosted_this_gp != 0)
-		rcu_preempt_ctrlblk.n_normal_balk_boosted++;
+		rcu_preempt_ctrlblk.n_balk_boost_tasks++;
 	else if (!ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time))
-		rcu_preempt_ctrlblk.n_normal_balk_notyet++;
-	else
-		rcu_preempt_ctrlblk.n_normal_balk_nos++;
-}
-
-static void rcu_initiate_exp_boost_trace(void)
-{
-	if (list_empty(&rcu_preempt_ctrlblk.blkd_tasks))
-		rcu_preempt_ctrlblk.n_exp_balk_blkd_tasks++;
+		rcu_preempt_ctrlblk.n_balk_notyet++;
 	else
-		rcu_preempt_ctrlblk.n_exp_balk_nos++;
+		rcu_preempt_ctrlblk.n_balk_nos++;
 }
 
 #endif /* #ifdef CONFIG_RCU_BOOST */
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index c224da41890..2e138db0338 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -131,7 +131,7 @@ struct rcu_torture {
 
 static LIST_HEAD(rcu_torture_freelist);
 static struct rcu_torture __rcu *rcu_torture_current;
-static long rcu_torture_current_version;
+static unsigned long rcu_torture_current_version;
 static struct rcu_torture rcu_tortures[10 * RCU_TORTURE_PIPE_LEN];
 static DEFINE_SPINLOCK(rcu_torture_lock);
 static DEFINE_PER_CPU(long [RCU_TORTURE_PIPE_LEN + 1], rcu_torture_count) =
@@ -146,8 +146,6 @@ static atomic_t n_rcu_torture_mberror;
 static atomic_t n_rcu_torture_error;
 static long n_rcu_torture_boost_ktrerror;
 static long n_rcu_torture_boost_rterror;
-static long n_rcu_torture_boost_allocerror;
-static long n_rcu_torture_boost_afferror;
 static long n_rcu_torture_boost_failure;
 static long n_rcu_torture_boosts;
 static long n_rcu_torture_timers;
@@ -163,11 +161,11 @@ static int stutter_pause_test;
 #endif
 int rcutorture_runnable = RCUTORTURE_RUNNABLE_INIT;
 
-#ifdef CONFIG_RCU_BOOST
+#if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU)
 #define rcu_can_boost() 1
-#else /* #ifdef CONFIG_RCU_BOOST */
+#else /* #if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU) */
 #define rcu_can_boost() 0
-#endif /* #else #ifdef CONFIG_RCU_BOOST */
+#endif /* #else #if defined(CONFIG_RCU_BOOST) && !defined(CONFIG_HOTPLUG_CPU) */
 
 static unsigned long boost_starttime;	/* jiffies of next boost test start. */
 DEFINE_MUTEX(boost_mutex);		/* protect setting boost_starttime */
@@ -751,6 +749,7 @@ static int rcu_torture_boost(void *arg)
 		n_rcu_torture_boost_rterror++;
 	}
 
+	init_rcu_head_on_stack(&rbi.rcu);
 	/* Each pass through the following loop does one boost-test cycle. */
 	do {
 		/* Wait for the next test interval. */
@@ -810,6 +809,7 @@ checkwait:	rcu_stutter_wait("rcu_torture_boost");
 
 	/* Clean up and exit. */
 	VERBOSE_PRINTK_STRING("rcu_torture_boost task stopping");
+	destroy_rcu_head_on_stack(&rbi.rcu);
 	rcutorture_shutdown_absorb("rcu_torture_boost");
 	while (!kthread_should_stop() || rbi.inflight)
 		schedule_timeout_uninterruptible(1);
@@ -886,7 +886,7 @@ rcu_torture_writer(void *arg)
 			old_rp->rtort_pipe_count++;
 			cur_ops->deferred_free(old_rp);
 		}
-		rcu_torture_current_version++;
+		rcutorture_record_progress(++rcu_torture_current_version);
 		oldbatch = cur_ops->completed();
 		rcu_stutter_wait("rcu_torture_writer");
 	} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
@@ -1066,8 +1066,8 @@ rcu_torture_printk(char *page)
 	}
 	cnt += sprintf(&page[cnt], "%s%s ", torture_type, TORTURE_FLAG);
 	cnt += sprintf(&page[cnt],
-		       "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d "
-		       "rtmbe: %d rtbke: %ld rtbre: %ld rtbae: %ld rtbafe: %ld "
+		       "rtc: %p ver: %lu tfle: %d rta: %d rtaf: %d rtf: %d "
+		       "rtmbe: %d rtbke: %ld rtbre: %ld "
 		       "rtbf: %ld rtb: %ld nt: %ld",
 		       rcu_torture_current,
 		       rcu_torture_current_version,
@@ -1078,16 +1078,12 @@ rcu_torture_printk(char *page)
 		       atomic_read(&n_rcu_torture_mberror),
 		       n_rcu_torture_boost_ktrerror,
 		       n_rcu_torture_boost_rterror,
-		       n_rcu_torture_boost_allocerror,
-		       n_rcu_torture_boost_afferror,
 		       n_rcu_torture_boost_failure,
 		       n_rcu_torture_boosts,
 		       n_rcu_torture_timers);
 	if (atomic_read(&n_rcu_torture_mberror) != 0 ||
 	    n_rcu_torture_boost_ktrerror != 0 ||
 	    n_rcu_torture_boost_rterror != 0 ||
-	    n_rcu_torture_boost_allocerror != 0 ||
-	    n_rcu_torture_boost_afferror != 0 ||
 	    n_rcu_torture_boost_failure != 0)
 		cnt += sprintf(&page[cnt], " !!!");
 	cnt += sprintf(&page[cnt], "\n%s%s ", torture_type, TORTURE_FLAG);
@@ -1331,6 +1327,7 @@ rcu_torture_cleanup(void)
 	int i;
 
 	mutex_lock(&fullstop_mutex);
+	rcutorture_record_test_transition();
 	if (fullstop == FULLSTOP_SHUTDOWN) {
 		printk(KERN_WARNING /* but going down anyway, so... */
 		       "Concurrent 'rmmod rcutorture' and shutdown illegal!\n");
@@ -1486,8 +1483,6 @@ rcu_torture_init(void)
 	atomic_set(&n_rcu_torture_error, 0);
 	n_rcu_torture_boost_ktrerror = 0;
 	n_rcu_torture_boost_rterror = 0;
-	n_rcu_torture_boost_allocerror = 0;
-	n_rcu_torture_boost_afferror = 0;
 	n_rcu_torture_boost_failure = 0;
 	n_rcu_torture_boosts = 0;
 	for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
@@ -1624,6 +1619,7 @@ rcu_torture_init(void)
 		}
 	}
 	register_reboot_notifier(&rcutorture_shutdown_nb);
+	rcutorture_record_test_transition();
 	mutex_unlock(&fullstop_mutex);
 	return 0;
 
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index dd4aea806f8..f07d2f03181 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -47,6 +47,9 @@
 #include <linux/mutex.h>
 #include <linux/time.h>
 #include <linux/kernel_stat.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/prefetch.h>
 
 #include "rcutree.h"
 
@@ -79,10 +82,41 @@ DEFINE_PER_CPU(struct rcu_data, rcu_sched_data);
 struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state);
 DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
 
+static struct rcu_state *rcu_state;
+
 int rcu_scheduler_active __read_mostly;
 EXPORT_SYMBOL_GPL(rcu_scheduler_active);
 
 /*
+ * Control variables for per-CPU and per-rcu_node kthreads.  These
+ * handle all flavors of RCU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task);
+DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
+DEFINE_PER_CPU(int, rcu_cpu_kthread_cpu);
+DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
+static DEFINE_PER_CPU(wait_queue_head_t, rcu_cpu_wq);
+DEFINE_PER_CPU(char, rcu_cpu_has_work);
+static char rcu_kthreads_spawnable;
+
+static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu);
+static void invoke_rcu_cpu_kthread(void);
+
+#define RCU_KTHREAD_PRIO 1	/* RT priority for per-CPU kthreads. */
+
+/*
+ * Track the rcutorture test sequence number and the update version
+ * number within a given test.  The rcutorture_testseq is incremented
+ * on every rcutorture module load and unload, so has an odd value
+ * when a test is running.  The rcutorture_vernum is set to zero
+ * when rcutorture starts and is incremented on each rcutorture update.
+ * These variables enable correlating rcutorture output with the
+ * RCU tracing information.
+ */
+unsigned long rcutorture_testseq;
+unsigned long rcutorture_vernum;
+
+/*
  * Return true if an RCU grace period is in progress.  The ACCESS_ONCE()s
  * permit this function to be invoked without holding the root rcu_node
  * structure's ->lock, but of course results can be subject to change.
@@ -124,6 +158,7 @@ void rcu_note_context_switch(int cpu)
 	rcu_sched_qs(cpu);
 	rcu_preempt_note_context_switch(cpu);
 }
+EXPORT_SYMBOL_GPL(rcu_note_context_switch);
 
 #ifdef CONFIG_NO_HZ
 DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
@@ -140,10 +175,8 @@ module_param(blimit, int, 0);
 module_param(qhimark, int, 0);
 module_param(qlowmark, int, 0);
 
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-int rcu_cpu_stall_suppress __read_mostly = RCU_CPU_STALL_SUPPRESS_INIT;
+int rcu_cpu_stall_suppress __read_mostly;
 module_param(rcu_cpu_stall_suppress, int, 0644);
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
 
 static void force_quiescent_state(struct rcu_state *rsp, int relaxed);
 static int rcu_pending(int cpu);
@@ -176,6 +209,31 @@ void rcu_bh_force_quiescent_state(void)
 EXPORT_SYMBOL_GPL(rcu_bh_force_quiescent_state);
 
 /*
+ * Record the number of times rcutorture tests have been initiated and
+ * terminated.  This information allows the debugfs tracing stats to be
+ * correlated to the rcutorture messages, even when the rcutorture module
+ * is being repeatedly loaded and unloaded.  In other words, we cannot
+ * store this state in rcutorture itself.
+ */
+void rcutorture_record_test_transition(void)
+{
+	rcutorture_testseq++;
+	rcutorture_vernum = 0;
+}
+EXPORT_SYMBOL_GPL(rcutorture_record_test_transition);
+
+/*
+ * Record the number of writer passes through the current rcutorture test.
+ * This is also used to correlate debugfs tracing stats with the rcutorture
+ * messages.
+ */
+void rcutorture_record_progress(unsigned long vernum)
+{
+	rcutorture_vernum++;
+}
+EXPORT_SYMBOL_GPL(rcutorture_record_progress);
+
+/*
  * Force a quiescent state for RCU-sched.
  */
 void rcu_sched_force_quiescent_state(void)
@@ -234,8 +292,8 @@ static int rcu_implicit_offline_qs(struct rcu_data *rdp)
 		return 1;
 	}
 
-	/* If preemptable RCU, no point in sending reschedule IPI. */
-	if (rdp->preemptable)
+	/* If preemptible RCU, no point in sending reschedule IPI. */
+	if (rdp->preemptible)
 		return 0;
 
 	/* The CPU is online, so send it a reschedule IPI. */
@@ -450,8 +508,6 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp)
 
 #endif /* #else #ifdef CONFIG_NO_HZ */
 
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-
 int rcu_cpu_stall_suppress __read_mostly;
 
 static void record_gp_stall_check_time(struct rcu_state *rsp)
@@ -537,21 +593,24 @@ static void print_cpu_stall(struct rcu_state *rsp)
 
 static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp)
 {
-	long delta;
+	unsigned long j;
+	unsigned long js;
 	struct rcu_node *rnp;
 
 	if (rcu_cpu_stall_suppress)
 		return;
-	delta = jiffies - ACCESS_ONCE(rsp->jiffies_stall);
+	j = ACCESS_ONCE(jiffies);
+	js = ACCESS_ONCE(rsp->jiffies_stall);
 	rnp = rdp->mynode;
-	if ((ACCESS_ONCE(rnp->qsmask) & rdp->grpmask) && delta >= 0) {
+	if ((ACCESS_ONCE(rnp->qsmask) & rdp->grpmask) && ULONG_CMP_GE(j, js)) {
 
 		/* We haven't checked in, so go dump stack. */
 		print_cpu_stall(rsp);
 
-	} else if (rcu_gp_in_progress(rsp) && delta >= RCU_STALL_RAT_DELAY) {
+	} else if (rcu_gp_in_progress(rsp) &&
+		   ULONG_CMP_GE(j, js + RCU_STALL_RAT_DELAY)) {
 
-		/* They had two time units to dump stack, so complain. */
+		/* They had a few time units to dump stack, so complain. */
 		print_other_cpu_stall(rsp);
 	}
 }
@@ -587,26 +646,6 @@ static void __init check_cpu_stall_init(void)
 	atomic_notifier_chain_register(&panic_notifier_list, &rcu_panic_block);
 }
 
-#else /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-static void record_gp_stall_check_time(struct rcu_state *rsp)
-{
-}
-
-static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp)
-{
-}
-
-void rcu_cpu_stall_reset(void)
-{
-}
-
-static void __init check_cpu_stall_init(void)
-{
-}
-
-#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
 /*
  * Update CPU-local rcu_data state to record the newly noticed grace period.
  * This is used both when we started the grace period and when we notice
@@ -809,6 +848,7 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
 		rnp->completed = rsp->completed;
 		rsp->signaled = RCU_SIGNAL_INIT; /* force_quiescent_state OK. */
 		rcu_start_gp_per_cpu(rsp, rnp, rdp);
+		rcu_preempt_boost_start_gp(rnp);
 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 		return;
 	}
@@ -844,6 +884,7 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
 		rnp->completed = rsp->completed;
 		if (rnp == rdp->mynode)
 			rcu_start_gp_per_cpu(rsp, rnp, rdp);
+		rcu_preempt_boost_start_gp(rnp);
 		raw_spin_unlock(&rnp->lock);	/* irqs remain disabled. */
 	}
 
@@ -864,7 +905,12 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
 static void rcu_report_qs_rsp(struct rcu_state *rsp, unsigned long flags)
 	__releases(rcu_get_root(rsp)->lock)
 {
+	unsigned long gp_duration;
+
 	WARN_ON_ONCE(!rcu_gp_in_progress(rsp));
+	gp_duration = jiffies - rsp->gp_start;
+	if (gp_duration > rsp->gp_max)
+		rsp->gp_max = gp_duration;
 	rsp->completed = rsp->gpnum;
 	rsp->signaled = RCU_GP_IDLE;
 	rcu_start_gp(rsp, flags);  /* releases root node's rnp->lock. */
@@ -894,7 +940,7 @@ rcu_report_qs_rnp(unsigned long mask, struct rcu_state *rsp,
 			return;
 		}
 		rnp->qsmask &= ~mask;
-		if (rnp->qsmask != 0 || rcu_preempted_readers(rnp)) {
+		if (rnp->qsmask != 0 || rcu_preempt_blocked_readers_cgp(rnp)) {
 
 			/* Other bits still set at this level, so done. */
 			raw_spin_unlock_irqrestore(&rnp->lock, flags);
@@ -1037,6 +1083,8 @@ static void rcu_send_cbs_to_online(struct rcu_state *rsp)
 /*
  * Remove the outgoing CPU from the bitmasks in the rcu_node hierarchy
  * and move all callbacks from the outgoing CPU to the current one.
+ * There can only be one CPU hotplug operation at a time, so no other
+ * CPU can be attempting to update rcu_cpu_kthread_task.
  */
 static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
 {
@@ -1045,6 +1093,14 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
 	int need_report = 0;
 	struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
 	struct rcu_node *rnp;
+	struct task_struct *t;
+
+	/* Stop the CPU's kthread. */
+	t = per_cpu(rcu_cpu_kthread_task, cpu);
+	if (t != NULL) {
+		per_cpu(rcu_cpu_kthread_task, cpu) = NULL;
+		kthread_stop(t);
+	}
 
 	/* Exclude any attempts to start a new grace period. */
 	raw_spin_lock_irqsave(&rsp->onofflock, flags);
@@ -1082,6 +1138,7 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 	if (need_report & RCU_OFL_TASKS_EXP_GP)
 		rcu_report_exp_rnp(rsp, rnp);
+	rcu_node_kthread_setaffinity(rnp, -1);
 }
 
 /*
@@ -1143,7 +1200,7 @@ static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
 		next = list->next;
 		prefetch(next);
 		debug_rcu_head_unqueue(list);
-		list->func(list);
+		__rcu_reclaim(list);
 		list = next;
 		if (++count >= rdp->blimit)
 			break;
@@ -1179,7 +1236,7 @@ static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
 
 	/* Re-raise the RCU softirq if there are callbacks remaining. */
 	if (cpu_has_callbacks_ready_to_invoke(rdp))
-		raise_softirq(RCU_SOFTIRQ);
+		invoke_rcu_cpu_kthread();
 }
 
 /*
@@ -1225,7 +1282,7 @@ void rcu_check_callbacks(int cpu, int user)
 	}
 	rcu_preempt_check_callbacks(cpu);
 	if (rcu_pending(cpu))
-		raise_softirq(RCU_SOFTIRQ);
+		invoke_rcu_cpu_kthread();
 }
 
 #ifdef CONFIG_SMP
@@ -1233,6 +1290,8 @@ void rcu_check_callbacks(int cpu, int user)
 /*
  * Scan the leaf rcu_node structures, processing dyntick state for any that
  * have not yet encountered a quiescent state, using the function specified.
+ * Also initiate boosting for any threads blocked on the root rcu_node.
+ *
  * The caller must have suppressed start of new grace periods.
  */
 static void force_qs_rnp(struct rcu_state *rsp, int (*f)(struct rcu_data *))
@@ -1251,7 +1310,7 @@ static void force_qs_rnp(struct rcu_state *rsp, int (*f)(struct rcu_data *))
 			return;
 		}
 		if (rnp->qsmask == 0) {
-			raw_spin_unlock_irqrestore(&rnp->lock, flags);
+			rcu_initiate_boost(rnp, flags); /* releases rnp->lock */
 			continue;
 		}
 		cpu = rnp->grplo;
@@ -1269,6 +1328,11 @@ static void force_qs_rnp(struct rcu_state *rsp, int (*f)(struct rcu_data *))
 		}
 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 	}
+	rnp = rcu_get_root(rsp);
+	if (rnp->qsmask == 0) {
+		raw_spin_lock_irqsave(&rnp->lock, flags);
+		rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
+	}
 }
 
 /*
@@ -1389,7 +1453,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
 /*
  * Do softirq processing for the current CPU.
  */
-static void rcu_process_callbacks(struct softirq_action *unused)
+static void rcu_process_callbacks(void)
 {
 	/*
 	 * Memory references from any prior RCU read-side critical sections
@@ -1414,6 +1478,347 @@ static void rcu_process_callbacks(struct softirq_action *unused)
 	rcu_needs_cpu_flush();
 }
 
+/*
+ * Wake up the current CPU's kthread.  This replaces raise_softirq()
+ * in earlier versions of RCU.  Note that because we are running on
+ * the current CPU with interrupts disabled, the rcu_cpu_kthread_task
+ * cannot disappear out from under us.
+ */
+static void invoke_rcu_cpu_kthread(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__this_cpu_write(rcu_cpu_has_work, 1);
+	if (__this_cpu_read(rcu_cpu_kthread_task) == NULL) {
+		local_irq_restore(flags);
+		return;
+	}
+	wake_up(&__get_cpu_var(rcu_cpu_wq));
+	local_irq_restore(flags);
+}
+
+/*
+ * Wake up the specified per-rcu_node-structure kthread.
+ * Because the per-rcu_node kthreads are immortal, we don't need
+ * to do anything to keep them alive.
+ */
+static void invoke_rcu_node_kthread(struct rcu_node *rnp)
+{
+	struct task_struct *t;
+
+	t = rnp->node_kthread_task;
+	if (t != NULL)
+		wake_up_process(t);
+}
+
+/*
+ * Set the specified CPU's kthread to run RT or not, as specified by
+ * the to_rt argument.  The CPU-hotplug locks are held, so the task
+ * is not going away.
+ */
+static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
+{
+	int policy;
+	struct sched_param sp;
+	struct task_struct *t;
+
+	t = per_cpu(rcu_cpu_kthread_task, cpu);
+	if (t == NULL)
+		return;
+	if (to_rt) {
+		policy = SCHED_FIFO;
+		sp.sched_priority = RCU_KTHREAD_PRIO;
+	} else {
+		policy = SCHED_NORMAL;
+		sp.sched_priority = 0;
+	}
+	sched_setscheduler_nocheck(t, policy, &sp);
+}
+
+/*
+ * Timer handler to initiate the waking up of per-CPU kthreads that
+ * have yielded the CPU due to excess numbers of RCU callbacks.
+ * We wake up the per-rcu_node kthread, which in turn will wake up
+ * the booster kthread.
+ */
+static void rcu_cpu_kthread_timer(unsigned long arg)
+{
+	unsigned long flags;
+	struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg);
+	struct rcu_node *rnp = rdp->mynode;
+
+	raw_spin_lock_irqsave(&rnp->lock, flags);
+	rnp->wakemask |= rdp->grpmask;
+	raw_spin_unlock_irqrestore(&rnp->lock, flags);
+	invoke_rcu_node_kthread(rnp);
+}
+
+/*
+ * Drop to non-real-time priority and yield, but only after posting a
+ * timer that will cause us to regain our real-time priority if we
+ * remain preempted.  Either way, we restore our real-time priority
+ * before returning.
+ */
+static void rcu_yield(void (*f)(unsigned long), unsigned long arg)
+{
+	struct sched_param sp;
+	struct timer_list yield_timer;
+
+	setup_timer_on_stack(&yield_timer, f, arg);
+	mod_timer(&yield_timer, jiffies + 2);
+	sp.sched_priority = 0;
+	sched_setscheduler_nocheck(current, SCHED_NORMAL, &sp);
+	set_user_nice(current, 19);
+	schedule();
+	sp.sched_priority = RCU_KTHREAD_PRIO;
+	sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
+	del_timer(&yield_timer);
+}
+
+/*
+ * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU.
+ * This can happen while the corresponding CPU is either coming online
+ * or going offline.  We cannot wait until the CPU is fully online
+ * before starting the kthread, because the various notifier functions
+ * can wait for RCU grace periods.  So we park rcu_cpu_kthread() until
+ * the corresponding CPU is online.
+ *
+ * Return 1 if the kthread needs to stop, 0 otherwise.
+ *
+ * Caller must disable bh.  This function can momentarily enable it.
+ */
+static int rcu_cpu_kthread_should_stop(int cpu)
+{
+	while (cpu_is_offline(cpu) ||
+	       !cpumask_equal(&current->cpus_allowed, cpumask_of(cpu)) ||
+	       smp_processor_id() != cpu) {
+		if (kthread_should_stop())
+			return 1;
+		per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU;
+		per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id();
+		local_bh_enable();
+		schedule_timeout_uninterruptible(1);
+		if (!cpumask_equal(&current->cpus_allowed, cpumask_of(cpu)))
+			set_cpus_allowed_ptr(current, cpumask_of(cpu));
+		local_bh_disable();
+	}
+	per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
+	return 0;
+}
+
+/*
+ * Per-CPU kernel thread that invokes RCU callbacks.  This replaces the
+ * earlier RCU softirq.
+ */
+static int rcu_cpu_kthread(void *arg)
+{
+	int cpu = (int)(long)arg;
+	unsigned long flags;
+	int spincnt = 0;
+	unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu);
+	wait_queue_head_t *wqp = &per_cpu(rcu_cpu_wq, cpu);
+	char work;
+	char *workp = &per_cpu(rcu_cpu_has_work, cpu);
+
+	for (;;) {
+		*statusp = RCU_KTHREAD_WAITING;
+		wait_event_interruptible(*wqp,
+					 *workp != 0 || kthread_should_stop());
+		local_bh_disable();
+		if (rcu_cpu_kthread_should_stop(cpu)) {
+			local_bh_enable();
+			break;
+		}
+		*statusp = RCU_KTHREAD_RUNNING;
+		per_cpu(rcu_cpu_kthread_loops, cpu)++;
+		local_irq_save(flags);
+		work = *workp;
+		*workp = 0;
+		local_irq_restore(flags);
+		if (work)
+			rcu_process_callbacks();
+		local_bh_enable();
+		if (*workp != 0)
+			spincnt++;
+		else
+			spincnt = 0;
+		if (spincnt > 10) {
+			*statusp = RCU_KTHREAD_YIELDING;
+			rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu);
+			spincnt = 0;
+		}
+	}
+	*statusp = RCU_KTHREAD_STOPPED;
+	return 0;
+}
+
+/*
+ * Spawn a per-CPU kthread, setting up affinity and priority.
+ * Because the CPU hotplug lock is held, no other CPU will be attempting
+ * to manipulate rcu_cpu_kthread_task.  There might be another CPU
+ * attempting to access it during boot, but the locking in kthread_bind()
+ * will enforce sufficient ordering.
+ */
+static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
+{
+	struct sched_param sp;
+	struct task_struct *t;
+
+	if (!rcu_kthreads_spawnable ||
+	    per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
+		return 0;
+	t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu);
+	if (IS_ERR(t))
+		return PTR_ERR(t);
+	kthread_bind(t, cpu);
+	per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
+	WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
+	per_cpu(rcu_cpu_kthread_task, cpu) = t;
+	wake_up_process(t);
+	sp.sched_priority = RCU_KTHREAD_PRIO;
+	sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+	return 0;
+}
+
+/*
+ * Per-rcu_node kthread, which is in charge of waking up the per-CPU
+ * kthreads when needed.  We ignore requests to wake up kthreads
+ * for offline CPUs, which is OK because force_quiescent_state()
+ * takes care of this case.
+ */
+static int rcu_node_kthread(void *arg)
+{
+	int cpu;
+	unsigned long flags;
+	unsigned long mask;
+	struct rcu_node *rnp = (struct rcu_node *)arg;
+	struct sched_param sp;
+	struct task_struct *t;
+
+	for (;;) {
+		rnp->node_kthread_status = RCU_KTHREAD_WAITING;
+		wait_event_interruptible(rnp->node_wq, rnp->wakemask != 0);
+		rnp->node_kthread_status = RCU_KTHREAD_RUNNING;
+		raw_spin_lock_irqsave(&rnp->lock, flags);
+		mask = rnp->wakemask;
+		rnp->wakemask = 0;
+		rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
+		for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) {
+			if ((mask & 0x1) == 0)
+				continue;
+			preempt_disable();
+			t = per_cpu(rcu_cpu_kthread_task, cpu);
+			if (!cpu_online(cpu) || t == NULL) {
+				preempt_enable();
+				continue;
+			}
+			per_cpu(rcu_cpu_has_work, cpu) = 1;
+			sp.sched_priority = RCU_KTHREAD_PRIO;
+			sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+			preempt_enable();
+		}
+	}
+	/* NOTREACHED */
+	rnp->node_kthread_status = RCU_KTHREAD_STOPPED;
+	return 0;
+}
+
+/*
+ * Set the per-rcu_node kthread's affinity to cover all CPUs that are
+ * served by the rcu_node in question.  The CPU hotplug lock is still
+ * held, so the value of rnp->qsmaskinit will be stable.
+ *
+ * We don't include outgoingcpu in the affinity set, use -1 if there is
+ * no outgoing CPU.  If there are no CPUs left in the affinity set,
+ * this function allows the kthread to execute on any CPU.
+ */
+static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
+{
+	cpumask_var_t cm;
+	int cpu;
+	unsigned long mask = rnp->qsmaskinit;
+
+	if (rnp->node_kthread_task == NULL)
+		return;
+	if (!alloc_cpumask_var(&cm, GFP_KERNEL))
+		return;
+	cpumask_clear(cm);
+	for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1)
+		if ((mask & 0x1) && cpu != outgoingcpu)
+			cpumask_set_cpu(cpu, cm);
+	if (cpumask_weight(cm) == 0) {
+		cpumask_setall(cm);
+		for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++)
+			cpumask_clear_cpu(cpu, cm);
+		WARN_ON_ONCE(cpumask_weight(cm) == 0);
+	}
+	set_cpus_allowed_ptr(rnp->node_kthread_task, cm);
+	rcu_boost_kthread_setaffinity(rnp, cm);
+	free_cpumask_var(cm);
+}
+
+/*
+ * Spawn a per-rcu_node kthread, setting priority and affinity.
+ * Called during boot before online/offline can happen, or, if
+ * during runtime, with the main CPU-hotplug locks held.  So only
+ * one of these can be executing at a time.
+ */
+static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
+						struct rcu_node *rnp)
+{
+	unsigned long flags;
+	int rnp_index = rnp - &rsp->node[0];
+	struct sched_param sp;
+	struct task_struct *t;
+
+	if (!rcu_kthreads_spawnable ||
+	    rnp->qsmaskinit == 0)
+		return 0;
+	if (rnp->node_kthread_task == NULL) {
+		t = kthread_create(rcu_node_kthread, (void *)rnp,
+				   "rcun%d", rnp_index);
+		if (IS_ERR(t))
+			return PTR_ERR(t);
+		raw_spin_lock_irqsave(&rnp->lock, flags);
+		rnp->node_kthread_task = t;
+		raw_spin_unlock_irqrestore(&rnp->lock, flags);
+		wake_up_process(t);
+		sp.sched_priority = 99;
+		sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+	}
+	return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
+}
+
+/*
+ * Spawn all kthreads -- called as soon as the scheduler is running.
+ */
+static int __init rcu_spawn_kthreads(void)
+{
+	int cpu;
+	struct rcu_node *rnp;
+
+	rcu_kthreads_spawnable = 1;
+	for_each_possible_cpu(cpu) {
+		init_waitqueue_head(&per_cpu(rcu_cpu_wq, cpu));
+		per_cpu(rcu_cpu_has_work, cpu) = 0;
+		if (cpu_online(cpu))
+			(void)rcu_spawn_one_cpu_kthread(cpu);
+	}
+	rnp = rcu_get_root(rcu_state);
+	init_waitqueue_head(&rnp->node_wq);
+	rcu_init_boost_waitqueue(rnp);
+	(void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+	if (NUM_RCU_NODES > 1)
+		rcu_for_each_leaf_node(rcu_state, rnp) {
+			init_waitqueue_head(&rnp->node_wq);
+			rcu_init_boost_waitqueue(rnp);
+			(void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+		}
+	return 0;
+}
+early_initcall(rcu_spawn_kthreads);
+
 static void
 __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	   struct rcu_state *rsp)
@@ -1439,6 +1844,13 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	/* Add the callback to our list. */
 	*rdp->nxttail[RCU_NEXT_TAIL] = head;
 	rdp->nxttail[RCU_NEXT_TAIL] = &head->next;
+	rdp->qlen++;
+
+	/* If interrupts were disabled, don't dive into RCU core. */
+	if (irqs_disabled_flags(flags)) {
+		local_irq_restore(flags);
+		return;
+	}
 
 	/*
 	 * Force the grace period if too many callbacks or too long waiting.
@@ -1447,7 +1859,7 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	 * invoking force_quiescent_state() if the newly enqueued callback
 	 * is the only one waiting for a grace period to complete.
 	 */
-	if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
+	if (unlikely(rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
 
 		/* Are we ignoring a completed grace period? */
 		rcu_process_gp_end(rsp, rdp);
@@ -1583,7 +1995,7 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp)
 		 * or RCU-bh, force a local reschedule.
 		 */
 		rdp->n_rp_qs_pending++;
-		if (!rdp->preemptable &&
+		if (!rdp->preemptible &&
 		    ULONG_CMP_LT(ACCESS_ONCE(rsp->jiffies_force_qs) - 1,
 				 jiffies))
 			set_need_resched();
@@ -1760,7 +2172,7 @@ rcu_boot_init_percpu_data(int cpu, struct rcu_state *rsp)
  * that this CPU cannot possibly have any RCU callbacks in flight yet.
  */
 static void __cpuinit
-rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable)
+rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
 {
 	unsigned long flags;
 	unsigned long mask;
@@ -1772,7 +2184,7 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable)
 	rdp->passed_quiesc = 0;  /* We could be racing with new GP, */
 	rdp->qs_pending = 1;	 /*  so set up to respond to current GP. */
 	rdp->beenonline = 1;	 /* We have now been online. */
-	rdp->preemptable = preemptable;
+	rdp->preemptible = preemptible;
 	rdp->qlen_last_fqs_check = 0;
 	rdp->n_force_qs_snap = rsp->n_force_qs;
 	rdp->blimit = blimit;
@@ -1813,6 +2225,19 @@ static void __cpuinit rcu_online_cpu(int cpu)
 	rcu_preempt_init_percpu_data(cpu);
 }
 
+static void __cpuinit rcu_online_kthreads(int cpu)
+{
+	struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
+	struct rcu_node *rnp = rdp->mynode;
+
+	/* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
+	if (rcu_kthreads_spawnable) {
+		(void)rcu_spawn_one_cpu_kthread(cpu);
+		if (rnp->node_kthread_task == NULL)
+			(void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+	}
+}
+
 /*
  * Handle CPU online/offline notification events.
  */
@@ -1820,11 +2245,23 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
 				    unsigned long action, void *hcpu)
 {
 	long cpu = (long)hcpu;
+	struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
+	struct rcu_node *rnp = rdp->mynode;
 
 	switch (action) {
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
 		rcu_online_cpu(cpu);
+		rcu_online_kthreads(cpu);
+		break;
+	case CPU_ONLINE:
+	case CPU_DOWN_FAILED:
+		rcu_node_kthread_setaffinity(rnp, -1);
+		rcu_cpu_kthread_setrt(cpu, 1);
+		break;
+	case CPU_DOWN_PREPARE:
+		rcu_node_kthread_setaffinity(rnp, cpu);
+		rcu_cpu_kthread_setrt(cpu, 0);
 		break;
 	case CPU_DYING:
 	case CPU_DYING_FROZEN:
@@ -1943,10 +2380,7 @@ static void __init rcu_init_one(struct rcu_state *rsp,
 					      j / rsp->levelspread[i - 1];
 			}
 			rnp->level = i;
-			INIT_LIST_HEAD(&rnp->blocked_tasks[0]);
-			INIT_LIST_HEAD(&rnp->blocked_tasks[1]);
-			INIT_LIST_HEAD(&rnp->blocked_tasks[2]);
-			INIT_LIST_HEAD(&rnp->blocked_tasks[3]);
+			INIT_LIST_HEAD(&rnp->blkd_tasks);
 		}
 	}
 
@@ -1968,7 +2402,6 @@ void __init rcu_init(void)
 	rcu_init_one(&rcu_sched_state, &rcu_sched_data);
 	rcu_init_one(&rcu_bh_state, &rcu_bh_data);
 	__rcu_init_preempt();
-	open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
 
 	/*
 	 * We don't need protection against CPU-hotplug here because
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index e8f057e44e3..257664815d5 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -91,6 +91,14 @@ struct rcu_dynticks {
 				/*  remains even for nmi from irq handler. */
 };
 
+/* RCU's kthread states for tracing. */
+#define RCU_KTHREAD_STOPPED  0
+#define RCU_KTHREAD_RUNNING  1
+#define RCU_KTHREAD_WAITING  2
+#define RCU_KTHREAD_OFFCPU   3
+#define RCU_KTHREAD_YIELDING 4
+#define RCU_KTHREAD_MAX      4
+
 /*
  * Definition for node within the RCU grace-period-detection hierarchy.
  */
@@ -109,10 +117,11 @@ struct rcu_node {
 				/*  an rcu_data structure, otherwise, each */
 				/*  bit corresponds to a child rcu_node */
 				/*  structure. */
-	unsigned long expmask;	/* Groups that have ->blocked_tasks[] */
+	unsigned long expmask;	/* Groups that have ->blkd_tasks */
 				/*  elements that need to drain to allow the */
 				/*  current expedited grace period to */
 				/*  complete (only for TREE_PREEMPT_RCU). */
+	unsigned long wakemask; /* CPUs whose kthread needs to be awakened. */
 	unsigned long qsmaskinit;
 				/* Per-GP initial value for qsmask & expmask. */
 	unsigned long grpmask;	/* Mask to apply to parent qsmask. */
@@ -122,11 +131,68 @@ struct rcu_node {
 	u8	grpnum;		/* CPU/group number for next level up. */
 	u8	level;		/* root is at level 0. */
 	struct rcu_node *parent;
-	struct list_head blocked_tasks[4];
-				/* Tasks blocked in RCU read-side critsect. */
-				/*  Grace period number (->gpnum) x blocked */
-				/*  by tasks on the (x & 0x1) element of the */
-				/*  blocked_tasks[] array. */
+	struct list_head blkd_tasks;
+				/* Tasks blocked in RCU read-side critical */
+				/*  section.  Tasks are placed at the head */
+				/*  of this list and age towards the tail. */
+	struct list_head *gp_tasks;
+				/* Pointer to the first task blocking the */
+				/*  current grace period, or NULL if there */
+				/*  is no such task. */
+	struct list_head *exp_tasks;
+				/* Pointer to the first task blocking the */
+				/*  current expedited grace period, or NULL */
+				/*  if there is no such task.  If there */
+				/*  is no current expedited grace period, */
+				/*  then there can cannot be any such task. */
+#ifdef CONFIG_RCU_BOOST
+	struct list_head *boost_tasks;
+				/* Pointer to first task that needs to be */
+				/*  priority boosted, or NULL if no priority */
+				/*  boosting is needed for this rcu_node */
+				/*  structure.  If there are no tasks */
+				/*  queued on this rcu_node structure that */
+				/*  are blocking the current grace period, */
+				/*  there can be no such task. */
+	unsigned long boost_time;
+				/* When to start boosting (jiffies). */
+	struct task_struct *boost_kthread_task;
+				/* kthread that takes care of priority */
+				/*  boosting for this rcu_node structure. */
+	wait_queue_head_t boost_wq;
+				/* Wait queue on which to park the boost */
+				/*  kthread. */
+	unsigned int boost_kthread_status;
+				/* State of boost_kthread_task for tracing. */
+	unsigned long n_tasks_boosted;
+				/* Total number of tasks boosted. */
+	unsigned long n_exp_boosts;
+				/* Number of tasks boosted for expedited GP. */
+	unsigned long n_normal_boosts;
+				/* Number of tasks boosted for normal GP. */
+	unsigned long n_balk_blkd_tasks;
+				/* Refused to boost: no blocked tasks. */
+	unsigned long n_balk_exp_gp_tasks;
+				/* Refused to boost: nothing blocking GP. */
+	unsigned long n_balk_boost_tasks;
+				/* Refused to boost: already boosting. */
+	unsigned long n_balk_notblocked;
+				/* Refused to boost: RCU RS CS still running. */
+	unsigned long n_balk_notyet;
+				/* Refused to boost: not yet time. */
+	unsigned long n_balk_nos;
+				/* Refused to boost: not sure why, though. */
+				/*  This can happen due to race conditions. */
+#endif /* #ifdef CONFIG_RCU_BOOST */
+	struct task_struct *node_kthread_task;
+				/* kthread that takes care of this rcu_node */
+				/*  structure, for example, awakening the */
+				/*  per-CPU kthreads as needed. */
+	wait_queue_head_t node_wq;
+				/* Wait queue on which to park the per-node */
+				/*  kthread. */
+	unsigned int node_kthread_status;
+				/* State of node_kthread_task for tracing. */
 } ____cacheline_internodealigned_in_smp;
 
 /*
@@ -175,7 +241,7 @@ struct rcu_data {
 	bool		passed_quiesc;	/* User-mode/idle loop etc. */
 	bool		qs_pending;	/* Core waits for quiesc state. */
 	bool		beenonline;	/* CPU online at least once. */
-	bool		preemptable;	/* Preemptable RCU? */
+	bool		preemptible;	/* Preemptible RCU? */
 	struct rcu_node *mynode;	/* This CPU's leaf of hierarchy */
 	unsigned long grpmask;		/* Mask to apply to leaf qsmask. */
 
@@ -254,7 +320,6 @@ struct rcu_data {
 #endif /* #else #ifdef CONFIG_NO_HZ */
 
 #define RCU_JIFFIES_TILL_FORCE_QS	 3	/* for rsp->jiffies_force_qs */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 
 #ifdef CONFIG_PROVE_RCU
 #define RCU_STALL_DELAY_DELTA	       (5 * HZ)
@@ -272,13 +337,6 @@ struct rcu_data {
 						/*  scheduling clock irq */
 						/*  before ratting on them. */
 
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE
-#define RCU_CPU_STALL_SUPPRESS_INIT 0
-#else
-#define RCU_CPU_STALL_SUPPRESS_INIT 1
-#endif
-
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
 
 /*
  * RCU global state, including node hierarchy.  This hierarchy is
@@ -325,12 +383,12 @@ struct rcu_state {
 						/*  due to lock unavailable. */
 	unsigned long n_force_qs_ngp;		/* Number of calls leaving */
 						/*  due to no GP active. */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 	unsigned long gp_start;			/* Time at which GP started, */
 						/*  but in jiffies. */
 	unsigned long jiffies_stall;		/* Time at which to check */
 						/*  for CPU stalls. */
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+	unsigned long gp_max;			/* Maximum GP duration in */
+						/*  jiffies. */
 	char *name;				/* Name of structure. */
 };
 
@@ -361,16 +419,14 @@ DECLARE_PER_CPU(struct rcu_data, rcu_preempt_data);
 static void rcu_bootup_announce(void);
 long rcu_batches_completed(void);
 static void rcu_preempt_note_context_switch(int cpu);
-static int rcu_preempted_readers(struct rcu_node *rnp);
+static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
 #ifdef CONFIG_HOTPLUG_CPU
 static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
 				      unsigned long flags);
 #endif /* #ifdef CONFIG_HOTPLUG_CPU */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 static void rcu_print_detail_task_stall(struct rcu_state *rsp);
 static void rcu_print_task_stall(struct rcu_node *rnp);
 static void rcu_preempt_stall_reset(void);
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
 static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
 #ifdef CONFIG_HOTPLUG_CPU
 static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
@@ -390,5 +446,13 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu);
 static void rcu_preempt_send_cbs_to_online(void);
 static void __init __rcu_init_preempt(void);
 static void rcu_needs_cpu_flush(void);
+static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp);
+static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
+static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
+					  cpumask_var_t cm);
+static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
+static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
+						 struct rcu_node *rnp,
+						 int rnp_index);
 
 #endif /* #ifndef RCU_TREE_NONCORE */
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index a3638710dc6..3f6559a5f5c 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1,7 +1,7 @@
 /*
  * Read-Copy Update mechanism for mutual exclusion (tree-based version)
  * Internal non-public definitions that provide either classic
- * or preemptable semantics.
+ * or preemptible semantics.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -54,10 +54,6 @@ static void __init rcu_bootup_announce_oddness(void)
 #ifdef CONFIG_RCU_TORTURE_TEST_RUNNABLE
 	printk(KERN_INFO "\tRCU torture testing starts during boot.\n");
 #endif
-#ifndef CONFIG_RCU_CPU_STALL_DETECTOR
-	printk(KERN_INFO
-	       "\tRCU-based detection of stalled CPUs is disabled.\n");
-#endif
 #if defined(CONFIG_TREE_PREEMPT_RCU) && !defined(CONFIG_RCU_CPU_STALL_VERBOSE)
 	printk(KERN_INFO "\tVerbose stalled-CPUs detection is disabled.\n");
 #endif
@@ -70,6 +66,7 @@ static void __init rcu_bootup_announce_oddness(void)
 
 struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state);
 DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);
+static struct rcu_state *rcu_state = &rcu_preempt_state;
 
 static int rcu_preempted_readers_exp(struct rcu_node *rnp);
 
@@ -78,7 +75,7 @@ static int rcu_preempted_readers_exp(struct rcu_node *rnp);
  */
 static void __init rcu_bootup_announce(void)
 {
-	printk(KERN_INFO "Preemptable hierarchical RCU implementation.\n");
+	printk(KERN_INFO "Preemptible hierarchical RCU implementation.\n");
 	rcu_bootup_announce_oddness();
 }
 
@@ -111,7 +108,7 @@ void rcu_force_quiescent_state(void)
 EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
 
 /*
- * Record a preemptable-RCU quiescent state for the specified CPU.  Note
+ * Record a preemptible-RCU quiescent state for the specified CPU.  Note
  * that this just means that the task currently running on the CPU is
  * not in a quiescent state.  There might be any number of tasks blocked
  * while in an RCU read-side critical section.
@@ -134,12 +131,12 @@ static void rcu_preempt_qs(int cpu)
  * We have entered the scheduler, and the current task might soon be
  * context-switched away from.  If this task is in an RCU read-side
  * critical section, we will no longer be able to rely on the CPU to
- * record that fact, so we enqueue the task on the appropriate entry
- * of the blocked_tasks[] array.  The task will dequeue itself when
- * it exits the outermost enclosing RCU read-side critical section.
- * Therefore, the current grace period cannot be permitted to complete
- * until the blocked_tasks[] entry indexed by the low-order bit of
- * rnp->gpnum empties.
+ * record that fact, so we enqueue the task on the blkd_tasks list.
+ * The task will dequeue itself when it exits the outermost enclosing
+ * RCU read-side critical section.  Therefore, the current grace period
+ * cannot be permitted to complete until the blkd_tasks list entries
+ * predating the current grace period drain, in other words, until
+ * rnp->gp_tasks becomes NULL.
  *
  * Caller must disable preemption.
  */
@@ -147,7 +144,6 @@ static void rcu_preempt_note_context_switch(int cpu)
 {
 	struct task_struct *t = current;
 	unsigned long flags;
-	int phase;
 	struct rcu_data *rdp;
 	struct rcu_node *rnp;
 
@@ -169,15 +165,30 @@ static void rcu_preempt_note_context_switch(int cpu)
 		 * (i.e., this CPU has not yet passed through a quiescent
 		 * state for the current grace period), then as long
 		 * as that task remains queued, the current grace period
-		 * cannot end.
+		 * cannot end.  Note that there is some uncertainty as
+		 * to exactly when the current grace period started.
+		 * We take a conservative approach, which can result
+		 * in unnecessarily waiting on tasks that started very
+		 * slightly after the current grace period began.  C'est
+		 * la vie!!!
 		 *
 		 * But first, note that the current CPU must still be
 		 * on line!
 		 */
 		WARN_ON_ONCE((rdp->grpmask & rnp->qsmaskinit) == 0);
 		WARN_ON_ONCE(!list_empty(&t->rcu_node_entry));
-		phase = (rnp->gpnum + !(rnp->qsmask & rdp->grpmask)) & 0x1;
-		list_add(&t->rcu_node_entry, &rnp->blocked_tasks[phase]);
+		if ((rnp->qsmask & rdp->grpmask) && rnp->gp_tasks != NULL) {
+			list_add(&t->rcu_node_entry, rnp->gp_tasks->prev);
+			rnp->gp_tasks = &t->rcu_node_entry;
+#ifdef CONFIG_RCU_BOOST
+			if (rnp->boost_tasks != NULL)
+				rnp->boost_tasks = rnp->gp_tasks;
+#endif /* #ifdef CONFIG_RCU_BOOST */
+		} else {
+			list_add(&t->rcu_node_entry, &rnp->blkd_tasks);
+			if (rnp->qsmask & rdp->grpmask)
+				rnp->gp_tasks = &t->rcu_node_entry;
+		}
 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 	}
 
@@ -196,7 +207,7 @@ static void rcu_preempt_note_context_switch(int cpu)
 }
 
 /*
- * Tree-preemptable RCU implementation for rcu_read_lock().
+ * Tree-preemptible RCU implementation for rcu_read_lock().
  * Just increment ->rcu_read_lock_nesting, shared state will be updated
  * if we block.
  */
@@ -212,12 +223,9 @@ EXPORT_SYMBOL_GPL(__rcu_read_lock);
  * for the specified rcu_node structure.  If the caller needs a reliable
  * answer, it must hold the rcu_node's ->lock.
  */
-static int rcu_preempted_readers(struct rcu_node *rnp)
+static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
 {
-	int phase = rnp->gpnum & 0x1;
-
-	return !list_empty(&rnp->blocked_tasks[phase]) ||
-	       !list_empty(&rnp->blocked_tasks[phase + 2]);
+	return rnp->gp_tasks != NULL;
 }
 
 /*
@@ -233,7 +241,7 @@ static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
 	unsigned long mask;
 	struct rcu_node *rnp_p;
 
-	if (rnp->qsmask != 0 || rcu_preempted_readers(rnp)) {
+	if (rnp->qsmask != 0 || rcu_preempt_blocked_readers_cgp(rnp)) {
 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 		return;  /* Still need more quiescent states! */
 	}
@@ -257,6 +265,21 @@ static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
 }
 
 /*
+ * Advance a ->blkd_tasks-list pointer to the next entry, instead
+ * returning NULL if at the end of the list.
+ */
+static struct list_head *rcu_next_node_entry(struct task_struct *t,
+					     struct rcu_node *rnp)
+{
+	struct list_head *np;
+
+	np = t->rcu_node_entry.next;
+	if (np == &rnp->blkd_tasks)
+		np = NULL;
+	return np;
+}
+
+/*
  * Handle special cases during rcu_read_unlock(), such as needing to
  * notify RCU core processing or task having blocked during the RCU
  * read-side critical section.
@@ -266,6 +289,7 @@ static void rcu_read_unlock_special(struct task_struct *t)
 	int empty;
 	int empty_exp;
 	unsigned long flags;
+	struct list_head *np;
 	struct rcu_node *rnp;
 	int special;
 
@@ -306,10 +330,19 @@ static void rcu_read_unlock_special(struct task_struct *t)
 				break;
 			raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
 		}
-		empty = !rcu_preempted_readers(rnp);
+		empty = !rcu_preempt_blocked_readers_cgp(rnp);
 		empty_exp = !rcu_preempted_readers_exp(rnp);
 		smp_mb(); /* ensure expedited fastpath sees end of RCU c-s. */
+		np = rcu_next_node_entry(t, rnp);
 		list_del_init(&t->rcu_node_entry);
+		if (&t->rcu_node_entry == rnp->gp_tasks)
+			rnp->gp_tasks = np;
+		if (&t->rcu_node_entry == rnp->exp_tasks)
+			rnp->exp_tasks = np;
+#ifdef CONFIG_RCU_BOOST
+		if (&t->rcu_node_entry == rnp->boost_tasks)
+			rnp->boost_tasks = np;
+#endif /* #ifdef CONFIG_RCU_BOOST */
 		t->rcu_blocked_node = NULL;
 
 		/*
@@ -322,6 +355,15 @@ static void rcu_read_unlock_special(struct task_struct *t)
 		else
 			rcu_report_unblock_qs_rnp(rnp, flags);
 
+#ifdef CONFIG_RCU_BOOST
+		/* Unboost if we were boosted. */
+		if (special & RCU_READ_UNLOCK_BOOSTED) {
+			t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BOOSTED;
+			rt_mutex_unlock(t->rcu_boost_mutex);
+			t->rcu_boost_mutex = NULL;
+		}
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
 		/*
 		 * If this was the last task on the expedited lists,
 		 * then we need to report up the rcu_node hierarchy.
@@ -334,7 +376,7 @@ static void rcu_read_unlock_special(struct task_struct *t)
 }
 
 /*
- * Tree-preemptable RCU implementation for rcu_read_unlock().
+ * Tree-preemptible RCU implementation for rcu_read_unlock().
  * Decrement ->rcu_read_lock_nesting.  If the result is zero (outermost
  * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
  * invoke rcu_read_unlock_special() to clean up after a context switch
@@ -356,8 +398,6 @@ void __rcu_read_unlock(void)
 }
 EXPORT_SYMBOL_GPL(__rcu_read_unlock);
 
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-
 #ifdef CONFIG_RCU_CPU_STALL_VERBOSE
 
 /*
@@ -367,18 +407,16 @@ EXPORT_SYMBOL_GPL(__rcu_read_unlock);
 static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp)
 {
 	unsigned long flags;
-	struct list_head *lp;
-	int phase;
 	struct task_struct *t;
 
-	if (rcu_preempted_readers(rnp)) {
-		raw_spin_lock_irqsave(&rnp->lock, flags);
-		phase = rnp->gpnum & 0x1;
-		lp = &rnp->blocked_tasks[phase];
-		list_for_each_entry(t, lp, rcu_node_entry)
-			sched_show_task(t);
-		raw_spin_unlock_irqrestore(&rnp->lock, flags);
-	}
+	if (!rcu_preempt_blocked_readers_cgp(rnp))
+		return;
+	raw_spin_lock_irqsave(&rnp->lock, flags);
+	t = list_entry(rnp->gp_tasks,
+		       struct task_struct, rcu_node_entry);
+	list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry)
+		sched_show_task(t);
+	raw_spin_unlock_irqrestore(&rnp->lock, flags);
 }
 
 /*
@@ -408,16 +446,14 @@ static void rcu_print_detail_task_stall(struct rcu_state *rsp)
  */
 static void rcu_print_task_stall(struct rcu_node *rnp)
 {
-	struct list_head *lp;
-	int phase;
 	struct task_struct *t;
 
-	if (rcu_preempted_readers(rnp)) {
-		phase = rnp->gpnum & 0x1;
-		lp = &rnp->blocked_tasks[phase];
-		list_for_each_entry(t, lp, rcu_node_entry)
-			printk(" P%d", t->pid);
-	}
+	if (!rcu_preempt_blocked_readers_cgp(rnp))
+		return;
+	t = list_entry(rnp->gp_tasks,
+		       struct task_struct, rcu_node_entry);
+	list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry)
+		printk(" P%d", t->pid);
 }
 
 /*
@@ -430,18 +466,21 @@ static void rcu_preempt_stall_reset(void)
 	rcu_preempt_state.jiffies_stall = jiffies + ULONG_MAX / 2;
 }
 
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
 /*
  * Check that the list of blocked tasks for the newly completed grace
  * period is in fact empty.  It is a serious bug to complete a grace
  * period that still has RCU readers blocked!  This function must be
  * invoked -before- updating this rnp's ->gpnum, and the rnp's ->lock
  * must be held by the caller.
+ *
+ * Also, if there are blocked tasks on the list, they automatically
+ * block the newly created grace period, so set up ->gp_tasks accordingly.
  */
 static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
 {
-	WARN_ON_ONCE(rcu_preempted_readers(rnp));
+	WARN_ON_ONCE(rcu_preempt_blocked_readers_cgp(rnp));
+	if (!list_empty(&rnp->blkd_tasks))
+		rnp->gp_tasks = rnp->blkd_tasks.next;
 	WARN_ON_ONCE(rnp->qsmask);
 }
 
@@ -465,50 +504,68 @@ static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
 				     struct rcu_node *rnp,
 				     struct rcu_data *rdp)
 {
-	int i;
 	struct list_head *lp;
 	struct list_head *lp_root;
 	int retval = 0;
 	struct rcu_node *rnp_root = rcu_get_root(rsp);
-	struct task_struct *tp;
+	struct task_struct *t;
 
 	if (rnp == rnp_root) {
 		WARN_ONCE(1, "Last CPU thought to be offlined?");
 		return 0;  /* Shouldn't happen: at least one CPU online. */
 	}
-	WARN_ON_ONCE(rnp != rdp->mynode &&
-		     (!list_empty(&rnp->blocked_tasks[0]) ||
-		      !list_empty(&rnp->blocked_tasks[1]) ||
-		      !list_empty(&rnp->blocked_tasks[2]) ||
-		      !list_empty(&rnp->blocked_tasks[3])));
+
+	/* If we are on an internal node, complain bitterly. */
+	WARN_ON_ONCE(rnp != rdp->mynode);
 
 	/*
-	 * Move tasks up to root rcu_node.  Rely on the fact that the
-	 * root rcu_node can be at most one ahead of the rest of the
-	 * rcu_nodes in terms of gp_num value.  This fact allows us to
-	 * move the blocked_tasks[] array directly, element by element.
+	 * Move tasks up to root rcu_node.  Don't try to get fancy for
+	 * this corner-case operation -- just put this node's tasks
+	 * at the head of the root node's list, and update the root node's
+	 * ->gp_tasks and ->exp_tasks pointers to those of this node's,
+	 * if non-NULL.  This might result in waiting for more tasks than
+	 * absolutely necessary, but this is a good performance/complexity
+	 * tradeoff.
 	 */
-	if (rcu_preempted_readers(rnp))
+	if (rcu_preempt_blocked_readers_cgp(rnp))
 		retval |= RCU_OFL_TASKS_NORM_GP;
 	if (rcu_preempted_readers_exp(rnp))
 		retval |= RCU_OFL_TASKS_EXP_GP;
-	for (i = 0; i < 4; i++) {
-		lp = &rnp->blocked_tasks[i];
-		lp_root = &rnp_root->blocked_tasks[i];
-		while (!list_empty(lp)) {
-			tp = list_entry(lp->next, typeof(*tp), rcu_node_entry);
-			raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
-			list_del(&tp->rcu_node_entry);
-			tp->rcu_blocked_node = rnp_root;
-			list_add(&tp->rcu_node_entry, lp_root);
-			raw_spin_unlock(&rnp_root->lock); /* irqs remain disabled */
-		}
+	lp = &rnp->blkd_tasks;
+	lp_root = &rnp_root->blkd_tasks;
+	while (!list_empty(lp)) {
+		t = list_entry(lp->next, typeof(*t), rcu_node_entry);
+		raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
+		list_del(&t->rcu_node_entry);
+		t->rcu_blocked_node = rnp_root;
+		list_add(&t->rcu_node_entry, lp_root);
+		if (&t->rcu_node_entry == rnp->gp_tasks)
+			rnp_root->gp_tasks = rnp->gp_tasks;
+		if (&t->rcu_node_entry == rnp->exp_tasks)
+			rnp_root->exp_tasks = rnp->exp_tasks;
+#ifdef CONFIG_RCU_BOOST
+		if (&t->rcu_node_entry == rnp->boost_tasks)
+			rnp_root->boost_tasks = rnp->boost_tasks;
+#endif /* #ifdef CONFIG_RCU_BOOST */
+		raw_spin_unlock(&rnp_root->lock); /* irqs still disabled */
 	}
+
+#ifdef CONFIG_RCU_BOOST
+	/* In case root is being boosted and leaf is not. */
+	raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
+	if (rnp_root->boost_tasks != NULL &&
+	    rnp_root->boost_tasks != rnp_root->gp_tasks)
+		rnp_root->boost_tasks = rnp_root->gp_tasks;
+	raw_spin_unlock(&rnp_root->lock); /* irqs still disabled */
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
+	rnp->gp_tasks = NULL;
+	rnp->exp_tasks = NULL;
 	return retval;
 }
 
 /*
- * Do CPU-offline processing for preemptable RCU.
+ * Do CPU-offline processing for preemptible RCU.
  */
 static void rcu_preempt_offline_cpu(int cpu)
 {
@@ -537,7 +594,7 @@ static void rcu_preempt_check_callbacks(int cpu)
 }
 
 /*
- * Process callbacks for preemptable RCU.
+ * Process callbacks for preemptible RCU.
  */
 static void rcu_preempt_process_callbacks(void)
 {
@@ -546,7 +603,7 @@ static void rcu_preempt_process_callbacks(void)
 }
 
 /*
- * Queue a preemptable-RCU callback for invocation after a grace period.
+ * Queue a preemptible-RCU callback for invocation after a grace period.
  */
 void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
 {
@@ -594,8 +651,7 @@ static DEFINE_MUTEX(sync_rcu_preempt_exp_mutex);
  */
 static int rcu_preempted_readers_exp(struct rcu_node *rnp)
 {
-	return !list_empty(&rnp->blocked_tasks[2]) ||
-	       !list_empty(&rnp->blocked_tasks[3]);
+	return rnp->exp_tasks != NULL;
 }
 
 /*
@@ -655,13 +711,17 @@ static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp)
 static void
 sync_rcu_preempt_exp_init(struct rcu_state *rsp, struct rcu_node *rnp)
 {
-	int must_wait;
+	unsigned long flags;
+	int must_wait = 0;
 
-	raw_spin_lock(&rnp->lock); /* irqs already disabled */
-	list_splice_init(&rnp->blocked_tasks[0], &rnp->blocked_tasks[2]);
-	list_splice_init(&rnp->blocked_tasks[1], &rnp->blocked_tasks[3]);
-	must_wait = rcu_preempted_readers_exp(rnp);
-	raw_spin_unlock(&rnp->lock); /* irqs remain disabled */
+	raw_spin_lock_irqsave(&rnp->lock, flags);
+	if (list_empty(&rnp->blkd_tasks))
+		raw_spin_unlock_irqrestore(&rnp->lock, flags);
+	else {
+		rnp->exp_tasks = rnp->blkd_tasks.next;
+		rcu_initiate_boost(rnp, flags);  /* releases rnp->lock */
+		must_wait = 1;
+	}
 	if (!must_wait)
 		rcu_report_exp_rnp(rsp, rnp);
 }
@@ -669,9 +729,7 @@ sync_rcu_preempt_exp_init(struct rcu_state *rsp, struct rcu_node *rnp)
 /*
  * Wait for an rcu-preempt grace period, but expedite it.  The basic idea
  * is to invoke synchronize_sched_expedited() to push all the tasks to
- * the ->blocked_tasks[] lists, move all entries from the first set of
- * ->blocked_tasks[] lists to the second set, and finally wait for this
- * second set to drain.
+ * the ->blkd_tasks lists and wait for this list to drain.
  */
 void synchronize_rcu_expedited(void)
 {
@@ -703,7 +761,7 @@ void synchronize_rcu_expedited(void)
 	if ((ACCESS_ONCE(sync_rcu_preempt_exp_count) - snap) > 0)
 		goto unlock_mb_ret; /* Others did our work for us. */
 
-	/* force all RCU readers onto blocked_tasks[]. */
+	/* force all RCU readers onto ->blkd_tasks lists. */
 	synchronize_sched_expedited();
 
 	raw_spin_lock_irqsave(&rsp->onofflock, flags);
@@ -715,7 +773,7 @@ void synchronize_rcu_expedited(void)
 		raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
 	}
 
-	/* Snapshot current state of ->blocked_tasks[] lists. */
+	/* Snapshot current state of ->blkd_tasks lists. */
 	rcu_for_each_leaf_node(rsp, rnp)
 		sync_rcu_preempt_exp_init(rsp, rnp);
 	if (NUM_RCU_NODES > 1)
@@ -723,7 +781,7 @@ void synchronize_rcu_expedited(void)
 
 	raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
 
-	/* Wait for snapshotted ->blocked_tasks[] lists to drain. */
+	/* Wait for snapshotted ->blkd_tasks lists to drain. */
 	rnp = rcu_get_root(rsp);
 	wait_event(sync_rcu_preempt_exp_wq,
 		   sync_rcu_preempt_exp_done(rnp));
@@ -739,7 +797,7 @@ mb_ret:
 EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
 
 /*
- * Check to see if there is any immediate preemptable-RCU-related work
+ * Check to see if there is any immediate preemptible-RCU-related work
  * to be done.
  */
 static int rcu_preempt_pending(int cpu)
@@ -749,7 +807,7 @@ static int rcu_preempt_pending(int cpu)
 }
 
 /*
- * Does preemptable RCU need the CPU to stay out of dynticks mode?
+ * Does preemptible RCU need the CPU to stay out of dynticks mode?
  */
 static int rcu_preempt_needs_cpu(int cpu)
 {
@@ -766,7 +824,7 @@ void rcu_barrier(void)
 EXPORT_SYMBOL_GPL(rcu_barrier);
 
 /*
- * Initialize preemptable RCU's per-CPU data.
+ * Initialize preemptible RCU's per-CPU data.
  */
 static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
 {
@@ -774,7 +832,7 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
 }
 
 /*
- * Move preemptable RCU's callbacks from dying CPU to other online CPU.
+ * Move preemptible RCU's callbacks from dying CPU to other online CPU.
  */
 static void rcu_preempt_send_cbs_to_online(void)
 {
@@ -782,7 +840,7 @@ static void rcu_preempt_send_cbs_to_online(void)
 }
 
 /*
- * Initialize preemptable RCU's state structures.
+ * Initialize preemptible RCU's state structures.
  */
 static void __init __rcu_init_preempt(void)
 {
@@ -790,7 +848,7 @@ static void __init __rcu_init_preempt(void)
 }
 
 /*
- * Check for a task exiting while in a preemptable-RCU read-side
+ * Check for a task exiting while in a preemptible-RCU read-side
  * critical section, clean up if so.  No need to issue warnings,
  * as debug_check_no_locks_held() already does this if lockdep
  * is enabled.
@@ -802,11 +860,13 @@ void exit_rcu(void)
 	if (t->rcu_read_lock_nesting == 0)
 		return;
 	t->rcu_read_lock_nesting = 1;
-	rcu_read_unlock();
+	__rcu_read_unlock();
 }
 
 #else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
 
+static struct rcu_state *rcu_state = &rcu_sched_state;
+
 /*
  * Tell them what RCU they are running.
  */
@@ -836,7 +896,7 @@ void rcu_force_quiescent_state(void)
 EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
 
 /*
- * Because preemptable RCU does not exist, we never have to check for
+ * Because preemptible RCU does not exist, we never have to check for
  * CPUs being in quiescent states.
  */
 static void rcu_preempt_note_context_switch(int cpu)
@@ -844,10 +904,10 @@ static void rcu_preempt_note_context_switch(int cpu)
 }
 
 /*
- * Because preemptable RCU does not exist, there are never any preempted
+ * Because preemptible RCU does not exist, there are never any preempted
  * RCU readers.
  */
-static int rcu_preempted_readers(struct rcu_node *rnp)
+static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
 {
 	return 0;
 }
@@ -862,10 +922,8 @@ static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
 
 #endif /* #ifdef CONFIG_HOTPLUG_CPU */
 
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-
 /*
- * Because preemptable RCU does not exist, we never have to check for
+ * Because preemptible RCU does not exist, we never have to check for
  * tasks blocked within RCU read-side critical sections.
  */
 static void rcu_print_detail_task_stall(struct rcu_state *rsp)
@@ -873,7 +931,7 @@ static void rcu_print_detail_task_stall(struct rcu_state *rsp)
 }
 
 /*
- * Because preemptable RCU does not exist, we never have to check for
+ * Because preemptible RCU does not exist, we never have to check for
  * tasks blocked within RCU read-side critical sections.
  */
 static void rcu_print_task_stall(struct rcu_node *rnp)
@@ -888,10 +946,8 @@ static void rcu_preempt_stall_reset(void)
 {
 }
 
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
 /*
- * Because there is no preemptable RCU, there can be no readers blocked,
+ * Because there is no preemptible RCU, there can be no readers blocked,
  * so there is no need to check for blocked tasks.  So check only for
  * bogus qsmask values.
  */
@@ -903,7 +959,7 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
 #ifdef CONFIG_HOTPLUG_CPU
 
 /*
- * Because preemptable RCU does not exist, it never needs to migrate
+ * Because preemptible RCU does not exist, it never needs to migrate
  * tasks that were blocked within RCU read-side critical sections, and
  * such non-existent tasks cannot possibly have been blocking the current
  * grace period.
@@ -916,7 +972,7 @@ static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
 }
 
 /*
- * Because preemptable RCU does not exist, it never needs CPU-offline
+ * Because preemptible RCU does not exist, it never needs CPU-offline
  * processing.
  */
 static void rcu_preempt_offline_cpu(int cpu)
@@ -926,7 +982,7 @@ static void rcu_preempt_offline_cpu(int cpu)
 #endif /* #ifdef CONFIG_HOTPLUG_CPU */
 
 /*
- * Because preemptable RCU does not exist, it never has any callbacks
+ * Because preemptible RCU does not exist, it never has any callbacks
  * to check.
  */
 static void rcu_preempt_check_callbacks(int cpu)
@@ -934,7 +990,7 @@ static void rcu_preempt_check_callbacks(int cpu)
 }
 
 /*
- * Because preemptable RCU does not exist, it never has any callbacks
+ * Because preemptible RCU does not exist, it never has any callbacks
  * to process.
  */
 static void rcu_preempt_process_callbacks(void)
@@ -943,7 +999,7 @@ static void rcu_preempt_process_callbacks(void)
 
 /*
  * Wait for an rcu-preempt grace period, but make it happen quickly.
- * But because preemptable RCU does not exist, map to rcu-sched.
+ * But because preemptible RCU does not exist, map to rcu-sched.
  */
 void synchronize_rcu_expedited(void)
 {
@@ -954,7 +1010,7 @@ EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
 #ifdef CONFIG_HOTPLUG_CPU
 
 /*
- * Because preemptable RCU does not exist, there is never any need to
+ * Because preemptible RCU does not exist, there is never any need to
  * report on tasks preempted in RCU read-side critical sections during
  * expedited RCU grace periods.
  */
@@ -966,7 +1022,7 @@ static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp)
 #endif /* #ifdef CONFIG_HOTPLUG_CPU */
 
 /*
- * Because preemptable RCU does not exist, it never has any work to do.
+ * Because preemptible RCU does not exist, it never has any work to do.
  */
 static int rcu_preempt_pending(int cpu)
 {
@@ -974,7 +1030,7 @@ static int rcu_preempt_pending(int cpu)
 }
 
 /*
- * Because preemptable RCU does not exist, it never needs any CPU.
+ * Because preemptible RCU does not exist, it never needs any CPU.
  */
 static int rcu_preempt_needs_cpu(int cpu)
 {
@@ -982,7 +1038,7 @@ static int rcu_preempt_needs_cpu(int cpu)
 }
 
 /*
- * Because preemptable RCU does not exist, rcu_barrier() is just
+ * Because preemptible RCU does not exist, rcu_barrier() is just
  * another name for rcu_barrier_sched().
  */
 void rcu_barrier(void)
@@ -992,7 +1048,7 @@ void rcu_barrier(void)
 EXPORT_SYMBOL_GPL(rcu_barrier);
 
 /*
- * Because preemptable RCU does not exist, there is no per-CPU
+ * Because preemptible RCU does not exist, there is no per-CPU
  * data to initialize.
  */
 static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
@@ -1000,14 +1056,14 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
 }
 
 /*
- * Because there is no preemptable RCU, there are no callbacks to move.
+ * Because there is no preemptible RCU, there are no callbacks to move.
  */
 static void rcu_preempt_send_cbs_to_online(void)
 {
 }
 
 /*
- * Because preemptable RCU does not exist, it need not be initialized.
+ * Because preemptible RCU does not exist, it need not be initialized.
  */
 static void __init __rcu_init_preempt(void)
 {
@@ -1015,6 +1071,276 @@ static void __init __rcu_init_preempt(void)
 
 #endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
 
+#ifdef CONFIG_RCU_BOOST
+
+#include "rtmutex_common.h"
+
+#ifdef CONFIG_RCU_TRACE
+
+static void rcu_initiate_boost_trace(struct rcu_node *rnp)
+{
+	if (list_empty(&rnp->blkd_tasks))
+		rnp->n_balk_blkd_tasks++;
+	else if (rnp->exp_tasks == NULL && rnp->gp_tasks == NULL)
+		rnp->n_balk_exp_gp_tasks++;
+	else if (rnp->gp_tasks != NULL && rnp->boost_tasks != NULL)
+		rnp->n_balk_boost_tasks++;
+	else if (rnp->gp_tasks != NULL && rnp->qsmask != 0)
+		rnp->n_balk_notblocked++;
+	else if (rnp->gp_tasks != NULL &&
+		 ULONG_CMP_LT(jiffies, rnp->boost_time))
+		rnp->n_balk_notyet++;
+	else
+		rnp->n_balk_nos++;
+}
+
+#else /* #ifdef CONFIG_RCU_TRACE */
+
+static void rcu_initiate_boost_trace(struct rcu_node *rnp)
+{
+}
+
+#endif /* #else #ifdef CONFIG_RCU_TRACE */
+
+/*
+ * Carry out RCU priority boosting on the task indicated by ->exp_tasks
+ * or ->boost_tasks, advancing the pointer to the next task in the
+ * ->blkd_tasks list.
+ *
+ * Note that irqs must be enabled: boosting the task can block.
+ * Returns 1 if there are more tasks needing to be boosted.
+ */
+static int rcu_boost(struct rcu_node *rnp)
+{
+	unsigned long flags;
+	struct rt_mutex mtx;
+	struct task_struct *t;
+	struct list_head *tb;
+
+	if (rnp->exp_tasks == NULL && rnp->boost_tasks == NULL)
+		return 0;  /* Nothing left to boost. */
+
+	raw_spin_lock_irqsave(&rnp->lock, flags);
+
+	/*
+	 * Recheck under the lock: all tasks in need of boosting
+	 * might exit their RCU read-side critical sections on their own.
+	 */
+	if (rnp->exp_tasks == NULL && rnp->boost_tasks == NULL) {
+		raw_spin_unlock_irqrestore(&rnp->lock, flags);
+		return 0;
+	}
+
+	/*
+	 * Preferentially boost tasks blocking expedited grace periods.
+	 * This cannot starve the normal grace periods because a second
+	 * expedited grace period must boost all blocked tasks, including
+	 * those blocking the pre-existing normal grace period.
+	 */
+	if (rnp->exp_tasks != NULL) {
+		tb = rnp->exp_tasks;
+		rnp->n_exp_boosts++;
+	} else {
+		tb = rnp->boost_tasks;
+		rnp->n_normal_boosts++;
+	}
+	rnp->n_tasks_boosted++;
+
+	/*
+	 * We boost task t by manufacturing an rt_mutex that appears to
+	 * be held by task t.  We leave a pointer to that rt_mutex where
+	 * task t can find it, and task t will release the mutex when it
+	 * exits its outermost RCU read-side critical section.  Then
+	 * simply acquiring this artificial rt_mutex will boost task
+	 * t's priority.  (Thanks to tglx for suggesting this approach!)
+	 *
+	 * Note that task t must acquire rnp->lock to remove itself from
+	 * the ->blkd_tasks list, which it will do from exit() if from
+	 * nowhere else.  We therefore are guaranteed that task t will
+	 * stay around at least until we drop rnp->lock.  Note that
+	 * rnp->lock also resolves races between our priority boosting
+	 * and task t's exiting its outermost RCU read-side critical
+	 * section.
+	 */
+	t = container_of(tb, struct task_struct, rcu_node_entry);
+	rt_mutex_init_proxy_locked(&mtx, t);
+	t->rcu_boost_mutex = &mtx;
+	t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BOOSTED;
+	raw_spin_unlock_irqrestore(&rnp->lock, flags);
+	rt_mutex_lock(&mtx);  /* Side effect: boosts task t's priority. */
+	rt_mutex_unlock(&mtx);  /* Keep lockdep happy. */
+
+	return rnp->exp_tasks != NULL || rnp->boost_tasks != NULL;
+}
+
+/*
+ * Timer handler to initiate waking up of boost kthreads that
+ * have yielded the CPU due to excessive numbers of tasks to
+ * boost.  We wake up the per-rcu_node kthread, which in turn
+ * will wake up the booster kthread.
+ */
+static void rcu_boost_kthread_timer(unsigned long arg)
+{
+	invoke_rcu_node_kthread((struct rcu_node *)arg);
+}
+
+/*
+ * Priority-boosting kthread.  One per leaf rcu_node and one for the
+ * root rcu_node.
+ */
+static int rcu_boost_kthread(void *arg)
+{
+	struct rcu_node *rnp = (struct rcu_node *)arg;
+	int spincnt = 0;
+	int more2boost;
+
+	for (;;) {
+		rnp->boost_kthread_status = RCU_KTHREAD_WAITING;
+		wait_event_interruptible(rnp->boost_wq, rnp->boost_tasks ||
+							rnp->exp_tasks);
+		rnp->boost_kthread_status = RCU_KTHREAD_RUNNING;
+		more2boost = rcu_boost(rnp);
+		if (more2boost)
+			spincnt++;
+		else
+			spincnt = 0;
+		if (spincnt > 10) {
+			rcu_yield(rcu_boost_kthread_timer, (unsigned long)rnp);
+			spincnt = 0;
+		}
+	}
+	/* NOTREACHED */
+	return 0;
+}
+
+/*
+ * Check to see if it is time to start boosting RCU readers that are
+ * blocking the current grace period, and, if so, tell the per-rcu_node
+ * kthread to start boosting them.  If there is an expedited grace
+ * period in progress, it is always time to boost.
+ *
+ * The caller must hold rnp->lock, which this function releases,
+ * but irqs remain disabled.  The ->boost_kthread_task is immortal,
+ * so we don't need to worry about it going away.
+ */
+static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
+{
+	struct task_struct *t;
+
+	if (!rcu_preempt_blocked_readers_cgp(rnp) && rnp->exp_tasks == NULL) {
+		rnp->n_balk_exp_gp_tasks++;
+		raw_spin_unlock_irqrestore(&rnp->lock, flags);
+		return;
+	}
+	if (rnp->exp_tasks != NULL ||
+	    (rnp->gp_tasks != NULL &&
+	     rnp->boost_tasks == NULL &&
+	     rnp->qsmask == 0 &&
+	     ULONG_CMP_GE(jiffies, rnp->boost_time))) {
+		if (rnp->exp_tasks == NULL)
+			rnp->boost_tasks = rnp->gp_tasks;
+		raw_spin_unlock_irqrestore(&rnp->lock, flags);
+		t = rnp->boost_kthread_task;
+		if (t != NULL)
+			wake_up_process(t);
+	} else {
+		rcu_initiate_boost_trace(rnp);
+		raw_spin_unlock_irqrestore(&rnp->lock, flags);
+	}
+}
+
+/*
+ * Set the affinity of the boost kthread.  The CPU-hotplug locks are
+ * held, so no one should be messing with the existence of the boost
+ * kthread.
+ */
+static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
+					  cpumask_var_t cm)
+{
+	struct task_struct *t;
+
+	t = rnp->boost_kthread_task;
+	if (t != NULL)
+		set_cpus_allowed_ptr(rnp->boost_kthread_task, cm);
+}
+
+#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000)
+
+/*
+ * Do priority-boost accounting for the start of a new grace period.
+ */
+static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
+{
+	rnp->boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES;
+}
+
+/*
+ * Initialize the RCU-boost waitqueue.
+ */
+static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp)
+{
+	init_waitqueue_head(&rnp->boost_wq);
+}
+
+/*
+ * Create an RCU-boost kthread for the specified node if one does not
+ * already exist.  We only create this kthread for preemptible RCU.
+ * Returns zero if all is well, a negated errno otherwise.
+ */
+static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
+						 struct rcu_node *rnp,
+						 int rnp_index)
+{
+	unsigned long flags;
+	struct sched_param sp;
+	struct task_struct *t;
+
+	if (&rcu_preempt_state != rsp)
+		return 0;
+	if (rnp->boost_kthread_task != NULL)
+		return 0;
+	t = kthread_create(rcu_boost_kthread, (void *)rnp,
+			   "rcub%d", rnp_index);
+	if (IS_ERR(t))
+		return PTR_ERR(t);
+	raw_spin_lock_irqsave(&rnp->lock, flags);
+	rnp->boost_kthread_task = t;
+	raw_spin_unlock_irqrestore(&rnp->lock, flags);
+	wake_up_process(t);
+	sp.sched_priority = RCU_KTHREAD_PRIO;
+	sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+	return 0;
+}
+
+#else /* #ifdef CONFIG_RCU_BOOST */
+
+static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
+{
+	raw_spin_unlock_irqrestore(&rnp->lock, flags);
+}
+
+static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
+					  cpumask_var_t cm)
+{
+}
+
+static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
+{
+}
+
+static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp)
+{
+}
+
+static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
+						 struct rcu_node *rnp,
+						 int rnp_index)
+{
+	return 0;
+}
+
+#endif /* #else #ifdef CONFIG_RCU_BOOST */
+
 #ifndef CONFIG_SMP
 
 void synchronize_sched_expedited(void)
@@ -1187,8 +1513,8 @@ static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
  *
  * Because it is not legal to invoke rcu_process_callbacks() with irqs
  * disabled, we do one pass of force_quiescent_state(), then do a
- * raise_softirq() to cause rcu_process_callbacks() to be invoked later.
- * The per-cpu rcu_dyntick_drain variable controls the sequencing.
+ * invoke_rcu_cpu_kthread() to cause rcu_process_callbacks() to be invoked
+ * later.  The per-cpu rcu_dyntick_drain variable controls the sequencing.
  */
 int rcu_needs_cpu(int cpu)
 {
@@ -1239,7 +1565,7 @@ int rcu_needs_cpu(int cpu)
 
 	/* If RCU callbacks are still pending, RCU still needs this CPU. */
 	if (c)
-		raise_softirq(RCU_SOFTIRQ);
+		invoke_rcu_cpu_kthread();
 	return c;
 }
 
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index c8e97853b97..aa0fd72b4bc 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -46,6 +46,18 @@
 #define RCU_TREE_NONCORE
 #include "rcutree.h"
 
+DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
+DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_cpu);
+DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
+DECLARE_PER_CPU(char, rcu_cpu_has_work);
+
+static char convert_kthread_status(unsigned int kthread_status)
+{
+	if (kthread_status > RCU_KTHREAD_MAX)
+		return '?';
+	return "SRWOY"[kthread_status];
+}
+
 static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
 {
 	if (!rdp->beenonline)
@@ -64,7 +76,21 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
 		   rdp->dynticks_fqs);
 #endif /* #ifdef CONFIG_NO_HZ */
 	seq_printf(m, " of=%lu ri=%lu", rdp->offline_fqs, rdp->resched_ipi);
-	seq_printf(m, " ql=%ld b=%ld", rdp->qlen, rdp->blimit);
+	seq_printf(m, " ql=%ld qs=%c%c%c%c kt=%d/%c/%d ktl=%x b=%ld",
+		   rdp->qlen,
+		   ".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] !=
+			rdp->nxttail[RCU_NEXT_TAIL]],
+		   ".R"[rdp->nxttail[RCU_WAIT_TAIL] !=
+			rdp->nxttail[RCU_NEXT_READY_TAIL]],
+		   ".W"[rdp->nxttail[RCU_DONE_TAIL] !=
+			rdp->nxttail[RCU_WAIT_TAIL]],
+		   ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]],
+		   per_cpu(rcu_cpu_has_work, rdp->cpu),
+		   convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
+					  rdp->cpu)),
+		   per_cpu(rcu_cpu_kthread_cpu, rdp->cpu),
+		   per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff,
+		   rdp->blimit);
 	seq_printf(m, " ci=%lu co=%lu ca=%lu\n",
 		   rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
 }
@@ -121,7 +147,18 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp)
 		   rdp->dynticks_fqs);
 #endif /* #ifdef CONFIG_NO_HZ */
 	seq_printf(m, ",%lu,%lu", rdp->offline_fqs, rdp->resched_ipi);
-	seq_printf(m, ",%ld,%ld", rdp->qlen, rdp->blimit);
+	seq_printf(m, ",%ld,\"%c%c%c%c\",%d,\"%c\",%ld", rdp->qlen,
+		   ".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] !=
+			rdp->nxttail[RCU_NEXT_TAIL]],
+		   ".R"[rdp->nxttail[RCU_WAIT_TAIL] !=
+			rdp->nxttail[RCU_NEXT_READY_TAIL]],
+		   ".W"[rdp->nxttail[RCU_DONE_TAIL] !=
+			rdp->nxttail[RCU_WAIT_TAIL]],
+		   ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]],
+		   per_cpu(rcu_cpu_has_work, rdp->cpu),
+		   convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
+					  rdp->cpu)),
+		   rdp->blimit);
 	seq_printf(m, ",%lu,%lu,%lu\n",
 		   rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
 }
@@ -157,11 +194,76 @@ static const struct file_operations rcudata_csv_fops = {
 	.release = single_release,
 };
 
+#ifdef CONFIG_RCU_BOOST
+
+static void print_one_rcu_node_boost(struct seq_file *m, struct rcu_node *rnp)
+{
+	seq_printf(m,  "%d:%d tasks=%c%c%c%c kt=%c ntb=%lu neb=%lu nnb=%lu "
+		   "j=%04x bt=%04x\n",
+		   rnp->grplo, rnp->grphi,
+		   "T."[list_empty(&rnp->blkd_tasks)],
+		   "N."[!rnp->gp_tasks],
+		   "E."[!rnp->exp_tasks],
+		   "B."[!rnp->boost_tasks],
+		   convert_kthread_status(rnp->boost_kthread_status),
+		   rnp->n_tasks_boosted, rnp->n_exp_boosts,
+		   rnp->n_normal_boosts,
+		   (int)(jiffies & 0xffff),
+		   (int)(rnp->boost_time & 0xffff));
+	seq_printf(m, "%s: nt=%lu egt=%lu bt=%lu nb=%lu ny=%lu nos=%lu\n",
+		   "     balk",
+		   rnp->n_balk_blkd_tasks,
+		   rnp->n_balk_exp_gp_tasks,
+		   rnp->n_balk_boost_tasks,
+		   rnp->n_balk_notblocked,
+		   rnp->n_balk_notyet,
+		   rnp->n_balk_nos);
+}
+
+static int show_rcu_node_boost(struct seq_file *m, void *unused)
+{
+	struct rcu_node *rnp;
+
+	rcu_for_each_leaf_node(&rcu_preempt_state, rnp)
+		print_one_rcu_node_boost(m, rnp);
+	return 0;
+}
+
+static int rcu_node_boost_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, show_rcu_node_boost, NULL);
+}
+
+static const struct file_operations rcu_node_boost_fops = {
+	.owner = THIS_MODULE,
+	.open = rcu_node_boost_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+/*
+ * Create the rcuboost debugfs entry.  Standard error return.
+ */
+static int rcu_boost_trace_create_file(struct dentry *rcudir)
+{
+	return !debugfs_create_file("rcuboost", 0444, rcudir, NULL,
+				    &rcu_node_boost_fops);
+}
+
+#else /* #ifdef CONFIG_RCU_BOOST */
+
+static int rcu_boost_trace_create_file(struct dentry *rcudir)
+{
+	return 0;  /* There cannot be an error if we didn't create it! */
+}
+
+#endif /* #else #ifdef CONFIG_RCU_BOOST */
+
 static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp)
 {
 	unsigned long gpnum;
 	int level = 0;
-	int phase;
 	struct rcu_node *rnp;
 
 	gpnum = rsp->gpnum;
@@ -178,13 +280,11 @@ static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp)
 			seq_puts(m, "\n");
 			level = rnp->level;
 		}
-		phase = gpnum & 0x1;
-		seq_printf(m, "%lx/%lx %c%c>%c%c %d:%d ^%d    ",
+		seq_printf(m, "%lx/%lx %c%c>%c %d:%d ^%d    ",
 			   rnp->qsmask, rnp->qsmaskinit,
-			   "T."[list_empty(&rnp->blocked_tasks[phase])],
-			   "E."[list_empty(&rnp->blocked_tasks[phase + 2])],
-			   "T."[list_empty(&rnp->blocked_tasks[!phase])],
-			   "E."[list_empty(&rnp->blocked_tasks[!phase + 2])],
+			   ".G"[rnp->gp_tasks != NULL],
+			   ".E"[rnp->exp_tasks != NULL],
+			   ".T"[!list_empty(&rnp->blkd_tasks)],
 			   rnp->grplo, rnp->grphi, rnp->grpnum);
 	}
 	seq_puts(m, "\n");
@@ -216,16 +316,35 @@ static const struct file_operations rcuhier_fops = {
 	.release = single_release,
 };
 
+static void show_one_rcugp(struct seq_file *m, struct rcu_state *rsp)
+{
+	unsigned long flags;
+	unsigned long completed;
+	unsigned long gpnum;
+	unsigned long gpage;
+	unsigned long gpmax;
+	struct rcu_node *rnp = &rsp->node[0];
+
+	raw_spin_lock_irqsave(&rnp->lock, flags);
+	completed = rsp->completed;
+	gpnum = rsp->gpnum;
+	if (rsp->completed == rsp->gpnum)
+		gpage = 0;
+	else
+		gpage = jiffies - rsp->gp_start;
+	gpmax = rsp->gp_max;
+	raw_spin_unlock_irqrestore(&rnp->lock, flags);
+	seq_printf(m, "%s: completed=%ld  gpnum=%lu  age=%ld  max=%ld\n",
+		   rsp->name, completed, gpnum, gpage, gpmax);
+}
+
 static int show_rcugp(struct seq_file *m, void *unused)
 {
 #ifdef CONFIG_TREE_PREEMPT_RCU
-	seq_printf(m, "rcu_preempt: completed=%ld  gpnum=%lu\n",
-		   rcu_preempt_state.completed, rcu_preempt_state.gpnum);
+	show_one_rcugp(m, &rcu_preempt_state);
 #endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-	seq_printf(m, "rcu_sched: completed=%ld  gpnum=%lu\n",
-		   rcu_sched_state.completed, rcu_sched_state.gpnum);
-	seq_printf(m, "rcu_bh: completed=%ld  gpnum=%lu\n",
-		   rcu_bh_state.completed, rcu_bh_state.gpnum);
+	show_one_rcugp(m, &rcu_sched_state);
+	show_one_rcugp(m, &rcu_bh_state);
 	return 0;
 }
 
@@ -298,6 +417,29 @@ static const struct file_operations rcu_pending_fops = {
 	.release = single_release,
 };
 
+static int show_rcutorture(struct seq_file *m, void *unused)
+{
+	seq_printf(m, "rcutorture test sequence: %lu %s\n",
+		   rcutorture_testseq >> 1,
+		   (rcutorture_testseq & 0x1) ? "(test in progress)" : "");
+	seq_printf(m, "rcutorture update version number: %lu\n",
+		   rcutorture_vernum);
+	return 0;
+}
+
+static int rcutorture_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, show_rcutorture, NULL);
+}
+
+static const struct file_operations rcutorture_fops = {
+	.owner = THIS_MODULE,
+	.open = rcutorture_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
 static struct dentry *rcudir;
 
 static int __init rcutree_trace_init(void)
@@ -318,6 +460,9 @@ static int __init rcutree_trace_init(void)
 	if (!retval)
 		goto free_out;
 
+	if (rcu_boost_trace_create_file(rcudir))
+		goto free_out;
+
 	retval = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops);
 	if (!retval)
 		goto free_out;
@@ -331,6 +476,11 @@ static int __init rcutree_trace_init(void)
 						NULL, &rcu_pending_fops);
 	if (!retval)
 		goto free_out;
+
+	retval = debugfs_create_file("rcutorture", 0444, rcudir,
+						NULL, &rcutorture_fops);
+	if (!retval)
+		goto free_out;
 	return 0;
 free_out:
 	debugfs_remove_recursive(rcudir);
diff --git a/kernel/sched.c b/kernel/sched.c
index f592ce6f861..c62acf45d3b 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -231,7 +231,7 @@ static void destroy_rt_bandwidth(struct rt_bandwidth *rt_b)
 #endif
 
 /*
- * sched_domains_mutex serializes calls to arch_init_sched_domains,
+ * sched_domains_mutex serializes calls to init_sched_domains,
  * detach_destroy_domains and partition_sched_domains.
  */
 static DEFINE_MUTEX(sched_domains_mutex);
@@ -312,6 +312,9 @@ struct cfs_rq {
 
 	u64 exec_clock;
 	u64 min_vruntime;
+#ifndef CONFIG_64BIT
+	u64 min_vruntime_copy;
+#endif
 
 	struct rb_root tasks_timeline;
 	struct rb_node *rb_leftmost;
@@ -325,7 +328,9 @@ struct cfs_rq {
 	 */
 	struct sched_entity *curr, *next, *last, *skip;
 
+#ifdef	CONFIG_SCHED_DEBUG
 	unsigned int nr_spread_over;
+#endif
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
 	struct rq *rq;	/* cpu runqueue to which this cfs_rq is attached */
@@ -417,6 +422,7 @@ struct rt_rq {
  */
 struct root_domain {
 	atomic_t refcount;
+	struct rcu_head rcu;
 	cpumask_var_t span;
 	cpumask_var_t online;
 
@@ -460,7 +466,7 @@ struct rq {
 	u64 nohz_stamp;
 	unsigned char nohz_balance_kick;
 #endif
-	unsigned int skip_clock_update;
+	int skip_clock_update;
 
 	/* capture load from *all* tasks on this cpu: */
 	struct load_weight load;
@@ -553,6 +559,10 @@ struct rq {
 	unsigned int ttwu_count;
 	unsigned int ttwu_local;
 #endif
+
+#ifdef CONFIG_SMP
+	struct task_struct *wake_list;
+#endif
 };
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
@@ -571,7 +581,7 @@ static inline int cpu_of(struct rq *rq)
 
 #define rcu_dereference_check_sched_domain(p) \
 	rcu_dereference_check((p), \
-			      rcu_read_lock_sched_held() || \
+			      rcu_read_lock_held() || \
 			      lockdep_is_held(&sched_domains_mutex))
 
 /*
@@ -596,7 +606,7 @@ static inline int cpu_of(struct rq *rq)
  * Return the group to which this tasks belongs.
  *
  * We use task_subsys_state_check() and extend the RCU verification
- * with lockdep_is_held(&task_rq(p)->lock) because cpu_cgroup_attach()
+ * with lockdep_is_held(&p->pi_lock) because cpu_cgroup_attach()
  * holds that lock for each task it moves into the cgroup. Therefore
  * by holding that lock, we pin the task to the current cgroup.
  */
@@ -606,7 +616,7 @@ static inline struct task_group *task_group(struct task_struct *p)
 	struct cgroup_subsys_state *css;
 
 	css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
-			lockdep_is_held(&task_rq(p)->lock));
+			lockdep_is_held(&p->pi_lock));
 	tg = container_of(css, struct task_group, css);
 
 	return autogroup_task_group(p, tg);
@@ -642,7 +652,7 @@ static void update_rq_clock(struct rq *rq)
 {
 	s64 delta;
 
-	if (rq->skip_clock_update)
+	if (rq->skip_clock_update > 0)
 		return;
 
 	delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
@@ -838,18 +848,39 @@ static inline int task_current(struct rq *rq, struct task_struct *p)
 	return rq->curr == p;
 }
 
-#ifndef __ARCH_WANT_UNLOCKED_CTXSW
 static inline int task_running(struct rq *rq, struct task_struct *p)
 {
+#ifdef CONFIG_SMP
+	return p->on_cpu;
+#else
 	return task_current(rq, p);
+#endif
 }
 
+#ifndef __ARCH_WANT_UNLOCKED_CTXSW
 static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
 {
+#ifdef CONFIG_SMP
+	/*
+	 * We can optimise this out completely for !SMP, because the
+	 * SMP rebalancing from interrupt is the only thing that cares
+	 * here.
+	 */
+	next->on_cpu = 1;
+#endif
 }
 
 static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
 {
+#ifdef CONFIG_SMP
+	/*
+	 * After ->on_cpu is cleared, the task can be moved to a different CPU.
+	 * We must ensure this doesn't happen until the switch is completely
+	 * finished.
+	 */
+	smp_wmb();
+	prev->on_cpu = 0;
+#endif
 #ifdef CONFIG_DEBUG_SPINLOCK
 	/* this is a valid case when another task releases the spinlock */
 	rq->lock.owner = current;
@@ -865,15 +896,6 @@ static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
 }
 
 #else /* __ARCH_WANT_UNLOCKED_CTXSW */
-static inline int task_running(struct rq *rq, struct task_struct *p)
-{
-#ifdef CONFIG_SMP
-	return p->oncpu;
-#else
-	return task_current(rq, p);
-#endif
-}
-
 static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
 {
 #ifdef CONFIG_SMP
@@ -882,7 +904,7 @@ static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
 	 * SMP rebalancing from interrupt is the only thing that cares
 	 * here.
 	 */
-	next->oncpu = 1;
+	next->on_cpu = 1;
 #endif
 #ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
 	raw_spin_unlock_irq(&rq->lock);
@@ -895,12 +917,12 @@ static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
 {
 #ifdef CONFIG_SMP
 	/*
-	 * After ->oncpu is cleared, the task can be moved to a different CPU.
+	 * After ->on_cpu is cleared, the task can be moved to a different CPU.
 	 * We must ensure this doesn't happen until the switch is completely
 	 * finished.
 	 */
 	smp_wmb();
-	prev->oncpu = 0;
+	prev->on_cpu = 0;
 #endif
 #ifndef __ARCH_WANT_INTERRUPTS_ON_CTXSW
 	local_irq_enable();
@@ -909,23 +931,15 @@ static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
 #endif /* __ARCH_WANT_UNLOCKED_CTXSW */
 
 /*
- * Check whether the task is waking, we use this to synchronize ->cpus_allowed
- * against ttwu().
- */
-static inline int task_is_waking(struct task_struct *p)
-{
-	return unlikely(p->state == TASK_WAKING);
-}
-
-/*
- * __task_rq_lock - lock the runqueue a given task resides on.
- * Must be called interrupts disabled.
+ * __task_rq_lock - lock the rq @p resides on.
  */
 static inline struct rq *__task_rq_lock(struct task_struct *p)
 	__acquires(rq->lock)
 {
 	struct rq *rq;
 
+	lockdep_assert_held(&p->pi_lock);
+
 	for (;;) {
 		rq = task_rq(p);
 		raw_spin_lock(&rq->lock);
@@ -936,22 +950,22 @@ static inline struct rq *__task_rq_lock(struct task_struct *p)
 }
 
 /*
- * task_rq_lock - lock the runqueue a given task resides on and disable
- * interrupts. Note the ordering: we can safely lookup the task_rq without
- * explicitly disabling preemption.
+ * task_rq_lock - lock p->pi_lock and lock the rq @p resides on.
  */
 static struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags)
+	__acquires(p->pi_lock)
 	__acquires(rq->lock)
 {
 	struct rq *rq;
 
 	for (;;) {
-		local_irq_save(*flags);
+		raw_spin_lock_irqsave(&p->pi_lock, *flags);
 		rq = task_rq(p);
 		raw_spin_lock(&rq->lock);
 		if (likely(rq == task_rq(p)))
 			return rq;
-		raw_spin_unlock_irqrestore(&rq->lock, *flags);
+		raw_spin_unlock(&rq->lock);
+		raw_spin_unlock_irqrestore(&p->pi_lock, *flags);
 	}
 }
 
@@ -961,10 +975,13 @@ static void __task_rq_unlock(struct rq *rq)
 	raw_spin_unlock(&rq->lock);
 }
 
-static inline void task_rq_unlock(struct rq *rq, unsigned long *flags)
+static inline void
+task_rq_unlock(struct rq *rq, struct task_struct *p, unsigned long *flags)
 	__releases(rq->lock)
+	__releases(p->pi_lock)
 {
-	raw_spin_unlock_irqrestore(&rq->lock, *flags);
+	raw_spin_unlock(&rq->lock);
+	raw_spin_unlock_irqrestore(&p->pi_lock, *flags);
 }
 
 /*
@@ -1193,11 +1210,17 @@ int get_nohz_timer_target(void)
 	int i;
 	struct sched_domain *sd;
 
+	rcu_read_lock();
 	for_each_domain(cpu, sd) {
-		for_each_cpu(i, sched_domain_span(sd))
-			if (!idle_cpu(i))
-				return i;
+		for_each_cpu(i, sched_domain_span(sd)) {
+			if (!idle_cpu(i)) {
+				cpu = i;
+				goto unlock;
+			}
+		}
 	}
+unlock:
+	rcu_read_unlock();
 	return cpu;
 }
 /*
@@ -1307,15 +1330,15 @@ calc_delta_mine(unsigned long delta_exec, unsigned long weight,
 {
 	u64 tmp;
 
+	tmp = (u64)delta_exec * weight;
+
 	if (!lw->inv_weight) {
 		if (BITS_PER_LONG > 32 && unlikely(lw->weight >= WMULT_CONST))
 			lw->inv_weight = 1;
 		else
-			lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)
-				/ (lw->weight+1);
+			lw->inv_weight = WMULT_CONST / lw->weight;
 	}
 
-	tmp = (u64)delta_exec * weight;
 	/*
 	 * Check whether we'd overflow the 64-bit multiplication:
 	 */
@@ -1773,7 +1796,6 @@ static void enqueue_task(struct rq *rq, struct task_struct *p, int flags)
 	update_rq_clock(rq);
 	sched_info_queued(p);
 	p->sched_class->enqueue_task(rq, p, flags);
-	p->se.on_rq = 1;
 }
 
 static void dequeue_task(struct rq *rq, struct task_struct *p, int flags)
@@ -1781,7 +1803,6 @@ static void dequeue_task(struct rq *rq, struct task_struct *p, int flags)
 	update_rq_clock(rq);
 	sched_info_dequeued(p);
 	p->sched_class->dequeue_task(rq, p, flags);
-	p->se.on_rq = 0;
 }
 
 /*
@@ -2116,7 +2137,7 @@ static void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
 	 * A queue event has occurred, and we're going to schedule.  In
 	 * this case, we can save a useless back to back clock update.
 	 */
-	if (rq->curr->se.on_rq && test_tsk_need_resched(rq->curr))
+	if (rq->curr->on_rq && test_tsk_need_resched(rq->curr))
 		rq->skip_clock_update = 1;
 }
 
@@ -2162,6 +2183,11 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
 	 */
 	WARN_ON_ONCE(p->state != TASK_RUNNING && p->state != TASK_WAKING &&
 			!(task_thread_info(p)->preempt_count & PREEMPT_ACTIVE));
+
+#ifdef CONFIG_LOCKDEP
+	WARN_ON_ONCE(debug_locks && !(lockdep_is_held(&p->pi_lock) ||
+				      lockdep_is_held(&task_rq(p)->lock)));
+#endif
 #endif
 
 	trace_sched_migrate_task(p, new_cpu);
@@ -2182,19 +2208,6 @@ struct migration_arg {
 static int migration_cpu_stop(void *data);
 
 /*
- * The task's runqueue lock must be held.
- * Returns true if you have to wait for migration thread.
- */
-static bool migrate_task(struct task_struct *p, struct rq *rq)
-{
-	/*
-	 * If the task is not on a runqueue (and not running), then
-	 * the next wake-up will properly place the task.
-	 */
-	return p->se.on_rq || task_running(rq, p);
-}
-
-/*
  * wait_task_inactive - wait for a thread to unschedule.
  *
  * If @match_state is nonzero, it's the @p->state value just checked and
@@ -2251,11 +2264,11 @@ unsigned long wait_task_inactive(struct task_struct *p, long match_state)
 		rq = task_rq_lock(p, &flags);
 		trace_sched_wait_task(p);
 		running = task_running(rq, p);
-		on_rq = p->se.on_rq;
+		on_rq = p->on_rq;
 		ncsw = 0;
 		if (!match_state || p->state == match_state)
 			ncsw = p->nvcsw | LONG_MIN; /* sets MSB */
-		task_rq_unlock(rq, &flags);
+		task_rq_unlock(rq, p, &flags);
 
 		/*
 		 * If it changed from the expected state, bail out now.
@@ -2309,7 +2322,7 @@ unsigned long wait_task_inactive(struct task_struct *p, long match_state)
  * Cause a process which is running on another CPU to enter
  * kernel-mode, without any delay. (to get signals handled.)
  *
- * NOTE: this function doesnt have to take the runqueue lock,
+ * NOTE: this function doesn't have to take the runqueue lock,
  * because all it wants to ensure is that the remote task enters
  * the kernel. If the IPI races and the task has been migrated
  * to another CPU then no harm is done and the purpose has been
@@ -2330,7 +2343,7 @@ EXPORT_SYMBOL_GPL(kick_process);
 
 #ifdef CONFIG_SMP
 /*
- * ->cpus_allowed is protected by either TASK_WAKING or rq->lock held.
+ * ->cpus_allowed is protected by both rq->lock and p->pi_lock
  */
 static int select_fallback_rq(int cpu, struct task_struct *p)
 {
@@ -2363,12 +2376,12 @@ static int select_fallback_rq(int cpu, struct task_struct *p)
 }
 
 /*
- * The caller (fork, wakeup) owns TASK_WAKING, ->cpus_allowed is stable.
+ * The caller (fork, wakeup) owns p->pi_lock, ->cpus_allowed is stable.
  */
 static inline
-int select_task_rq(struct rq *rq, struct task_struct *p, int sd_flags, int wake_flags)
+int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags)
 {
-	int cpu = p->sched_class->select_task_rq(rq, p, sd_flags, wake_flags);
+	int cpu = p->sched_class->select_task_rq(p, sd_flags, wake_flags);
 
 	/*
 	 * In order not to call set_task_cpu() on a blocking task we need
@@ -2394,27 +2407,62 @@ static void update_avg(u64 *avg, u64 sample)
 }
 #endif
 
-static inline void ttwu_activate(struct task_struct *p, struct rq *rq,
-				 bool is_sync, bool is_migrate, bool is_local,
-				 unsigned long en_flags)
+static void
+ttwu_stat(struct task_struct *p, int cpu, int wake_flags)
 {
+#ifdef CONFIG_SCHEDSTATS
+	struct rq *rq = this_rq();
+
+#ifdef CONFIG_SMP
+	int this_cpu = smp_processor_id();
+
+	if (cpu == this_cpu) {
+		schedstat_inc(rq, ttwu_local);
+		schedstat_inc(p, se.statistics.nr_wakeups_local);
+	} else {
+		struct sched_domain *sd;
+
+		schedstat_inc(p, se.statistics.nr_wakeups_remote);
+		rcu_read_lock();
+		for_each_domain(this_cpu, sd) {
+			if (cpumask_test_cpu(cpu, sched_domain_span(sd))) {
+				schedstat_inc(sd, ttwu_wake_remote);
+				break;
+			}
+		}
+		rcu_read_unlock();
+	}
+#endif /* CONFIG_SMP */
+
+	schedstat_inc(rq, ttwu_count);
 	schedstat_inc(p, se.statistics.nr_wakeups);
-	if (is_sync)
+
+	if (wake_flags & WF_SYNC)
 		schedstat_inc(p, se.statistics.nr_wakeups_sync);
-	if (is_migrate)
+
+	if (cpu != task_cpu(p))
 		schedstat_inc(p, se.statistics.nr_wakeups_migrate);
-	if (is_local)
-		schedstat_inc(p, se.statistics.nr_wakeups_local);
-	else
-		schedstat_inc(p, se.statistics.nr_wakeups_remote);
 
+#endif /* CONFIG_SCHEDSTATS */
+}
+
+static void ttwu_activate(struct rq *rq, struct task_struct *p, int en_flags)
+{
 	activate_task(rq, p, en_flags);
+	p->on_rq = 1;
+
+	/* if a worker is waking up, notify workqueue */
+	if (p->flags & PF_WQ_WORKER)
+		wq_worker_waking_up(p, cpu_of(rq));
 }
 
-static inline void ttwu_post_activation(struct task_struct *p, struct rq *rq,
-					int wake_flags, bool success)
+/*
+ * Mark the task runnable and perform wakeup-preemption.
+ */
+static void
+ttwu_do_wakeup(struct rq *rq, struct task_struct *p, int wake_flags)
 {
-	trace_sched_wakeup(p, success);
+	trace_sched_wakeup(p, true);
 	check_preempt_curr(rq, p, wake_flags);
 
 	p->state = TASK_RUNNING;
@@ -2433,9 +2481,99 @@ static inline void ttwu_post_activation(struct task_struct *p, struct rq *rq,
 		rq->idle_stamp = 0;
 	}
 #endif
-	/* if a worker is waking up, notify workqueue */
-	if ((p->flags & PF_WQ_WORKER) && success)
-		wq_worker_waking_up(p, cpu_of(rq));
+}
+
+static void
+ttwu_do_activate(struct rq *rq, struct task_struct *p, int wake_flags)
+{
+#ifdef CONFIG_SMP
+	if (p->sched_contributes_to_load)
+		rq->nr_uninterruptible--;
+#endif
+
+	ttwu_activate(rq, p, ENQUEUE_WAKEUP | ENQUEUE_WAKING);
+	ttwu_do_wakeup(rq, p, wake_flags);
+}
+
+/*
+ * Called in case the task @p isn't fully descheduled from its runqueue,
+ * in this case we must do a remote wakeup. Its a 'light' wakeup though,
+ * since all we need to do is flip p->state to TASK_RUNNING, since
+ * the task is still ->on_rq.
+ */
+static int ttwu_remote(struct task_struct *p, int wake_flags)
+{
+	struct rq *rq;
+	int ret = 0;
+
+	rq = __task_rq_lock(p);
+	if (p->on_rq) {
+		ttwu_do_wakeup(rq, p, wake_flags);
+		ret = 1;
+	}
+	__task_rq_unlock(rq);
+
+	return ret;
+}
+
+#ifdef CONFIG_SMP
+static void sched_ttwu_pending(void)
+{
+	struct rq *rq = this_rq();
+	struct task_struct *list = xchg(&rq->wake_list, NULL);
+
+	if (!list)
+		return;
+
+	raw_spin_lock(&rq->lock);
+
+	while (list) {
+		struct task_struct *p = list;
+		list = list->wake_entry;
+		ttwu_do_activate(rq, p, 0);
+	}
+
+	raw_spin_unlock(&rq->lock);
+}
+
+void scheduler_ipi(void)
+{
+	sched_ttwu_pending();
+}
+
+static void ttwu_queue_remote(struct task_struct *p, int cpu)
+{
+	struct rq *rq = cpu_rq(cpu);
+	struct task_struct *next = rq->wake_list;
+
+	for (;;) {
+		struct task_struct *old = next;
+
+		p->wake_entry = next;
+		next = cmpxchg(&rq->wake_list, old, p);
+		if (next == old)
+			break;
+	}
+
+	if (!next)
+		smp_send_reschedule(cpu);
+}
+#endif
+
+static void ttwu_queue(struct task_struct *p, int cpu)
+{
+	struct rq *rq = cpu_rq(cpu);
+
+#if defined(CONFIG_SMP) && defined(CONFIG_SCHED_TTWU_QUEUE)
+	if (sched_feat(TTWU_QUEUE) && cpu != smp_processor_id()) {
+		ttwu_queue_remote(p, cpu);
+		return;
+	}
+#endif
+
+	raw_spin_lock(&rq->lock);
+	ttwu_do_activate(rq, p, 0);
+	raw_spin_unlock(&rq->lock);
 }
 
 /**
@@ -2453,92 +2591,64 @@ static inline void ttwu_post_activation(struct task_struct *p, struct rq *rq,
  * Returns %true if @p was woken up, %false if it was already running
  * or @state didn't match @p's state.
  */
-static int try_to_wake_up(struct task_struct *p, unsigned int state,
-			  int wake_flags)
+static int
+try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags)
 {
-	int cpu, orig_cpu, this_cpu, success = 0;
 	unsigned long flags;
-	unsigned long en_flags = ENQUEUE_WAKEUP;
-	struct rq *rq;
-
-	this_cpu = get_cpu();
+	int cpu, success = 0;
 
 	smp_wmb();
-	rq = task_rq_lock(p, &flags);
+	raw_spin_lock_irqsave(&p->pi_lock, flags);
 	if (!(p->state & state))
 		goto out;
 
-	if (p->se.on_rq)
-		goto out_running;
-
+	success = 1; /* we're going to change ->state */
 	cpu = task_cpu(p);
-	orig_cpu = cpu;
 
-#ifdef CONFIG_SMP
-	if (unlikely(task_running(rq, p)))
-		goto out_activate;
+	if (p->on_rq && ttwu_remote(p, wake_flags))
+		goto stat;
 
+#ifdef CONFIG_SMP
 	/*
-	 * In order to handle concurrent wakeups and release the rq->lock
-	 * we put the task in TASK_WAKING state.
-	 *
-	 * First fix up the nr_uninterruptible count:
+	 * If the owning (remote) cpu is still in the middle of schedule() with
+	 * this task as prev, wait until its done referencing the task.
 	 */
-	if (task_contributes_to_load(p)) {
-		if (likely(cpu_online(orig_cpu)))
-			rq->nr_uninterruptible--;
-		else
-			this_rq()->nr_uninterruptible--;
-	}
-	p->state = TASK_WAKING;
-
-	if (p->sched_class->task_waking) {
-		p->sched_class->task_waking(rq, p);
-		en_flags |= ENQUEUE_WAKING;
+	while (p->on_cpu) {
+#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
+		/*
+		 * If called from interrupt context we could have landed in the
+		 * middle of schedule(), in this case we should take care not
+		 * to spin on ->on_cpu if p is current, since that would
+		 * deadlock.
+		 */
+		if (p == current) {
+			ttwu_queue(p, cpu);
+			goto stat;
+		}
+#endif
+		cpu_relax();
 	}
-
-	cpu = select_task_rq(rq, p, SD_BALANCE_WAKE, wake_flags);
-	if (cpu != orig_cpu)
-		set_task_cpu(p, cpu);
-	__task_rq_unlock(rq);
-
-	rq = cpu_rq(cpu);
-	raw_spin_lock(&rq->lock);
-
 	/*
-	 * We migrated the task without holding either rq->lock, however
-	 * since the task is not on the task list itself, nobody else
-	 * will try and migrate the task, hence the rq should match the
-	 * cpu we just moved it to.
+	 * Pairs with the smp_wmb() in finish_lock_switch().
 	 */
-	WARN_ON(task_cpu(p) != cpu);
-	WARN_ON(p->state != TASK_WAKING);
+	smp_rmb();
 
-#ifdef CONFIG_SCHEDSTATS
-	schedstat_inc(rq, ttwu_count);
-	if (cpu == this_cpu)
-		schedstat_inc(rq, ttwu_local);
-	else {
-		struct sched_domain *sd;
-		for_each_domain(this_cpu, sd) {
-			if (cpumask_test_cpu(cpu, sched_domain_span(sd))) {
-				schedstat_inc(sd, ttwu_wake_remote);
-				break;
-			}
-		}
-	}
-#endif /* CONFIG_SCHEDSTATS */
+	p->sched_contributes_to_load = !!task_contributes_to_load(p);
+	p->state = TASK_WAKING;
+
+	if (p->sched_class->task_waking)
+		p->sched_class->task_waking(p);
 
-out_activate:
+	cpu = select_task_rq(p, SD_BALANCE_WAKE, wake_flags);
+	if (task_cpu(p) != cpu)
+		set_task_cpu(p, cpu);
 #endif /* CONFIG_SMP */
-	ttwu_activate(p, rq, wake_flags & WF_SYNC, orig_cpu != cpu,
-		      cpu == this_cpu, en_flags);
-	success = 1;
-out_running:
-	ttwu_post_activation(p, rq, wake_flags, success);
+
+	ttwu_queue(p, cpu);
+stat:
+	ttwu_stat(p, cpu, wake_flags);
 out:
-	task_rq_unlock(rq, &flags);
-	put_cpu();
+	raw_spin_unlock_irqrestore(&p->pi_lock, flags);
 
 	return success;
 }
@@ -2547,31 +2657,34 @@ out:
  * try_to_wake_up_local - try to wake up a local task with rq lock held
  * @p: the thread to be awakened
  *
- * Put @p on the run-queue if it's not already there.  The caller must
+ * Put @p on the run-queue if it's not already there. The caller must
  * ensure that this_rq() is locked, @p is bound to this_rq() and not
- * the current task.  this_rq() stays locked over invocation.
+ * the current task.
  */
 static void try_to_wake_up_local(struct task_struct *p)
 {
 	struct rq *rq = task_rq(p);
-	bool success = false;
 
 	BUG_ON(rq != this_rq());
 	BUG_ON(p == current);
 	lockdep_assert_held(&rq->lock);
 
+	if (!raw_spin_trylock(&p->pi_lock)) {
+		raw_spin_unlock(&rq->lock);
+		raw_spin_lock(&p->pi_lock);
+		raw_spin_lock(&rq->lock);
+	}
+
 	if (!(p->state & TASK_NORMAL))
-		return;
+		goto out;
 
-	if (!p->se.on_rq) {
-		if (likely(!task_running(rq, p))) {
-			schedstat_inc(rq, ttwu_count);
-			schedstat_inc(rq, ttwu_local);
-		}
-		ttwu_activate(p, rq, false, false, true, ENQUEUE_WAKEUP);
-		success = true;
-	}
-	ttwu_post_activation(p, rq, 0, success);
+	if (!p->on_rq)
+		ttwu_activate(rq, p, ENQUEUE_WAKEUP);
+
+	ttwu_do_wakeup(rq, p, 0);
+	ttwu_stat(p, smp_processor_id(), 0);
+out:
+	raw_spin_unlock(&p->pi_lock);
 }
 
 /**
@@ -2604,19 +2717,21 @@ int wake_up_state(struct task_struct *p, unsigned int state)
  */
 static void __sched_fork(struct task_struct *p)
 {
+	p->on_rq			= 0;
+
+	p->se.on_rq			= 0;
 	p->se.exec_start		= 0;
 	p->se.sum_exec_runtime		= 0;
 	p->se.prev_sum_exec_runtime	= 0;
 	p->se.nr_migrations		= 0;
 	p->se.vruntime			= 0;
+	INIT_LIST_HEAD(&p->se.group_node);
 
 #ifdef CONFIG_SCHEDSTATS
 	memset(&p->se.statistics, 0, sizeof(p->se.statistics));
 #endif
 
 	INIT_LIST_HEAD(&p->rt.run_list);
-	p->se.on_rq = 0;
-	INIT_LIST_HEAD(&p->se.group_node);
 
 #ifdef CONFIG_PREEMPT_NOTIFIERS
 	INIT_HLIST_HEAD(&p->preempt_notifiers);
@@ -2626,8 +2741,9 @@ static void __sched_fork(struct task_struct *p)
 /*
  * fork()/clone()-time setup:
  */
-void sched_fork(struct task_struct *p, int clone_flags)
+void sched_fork(struct task_struct *p)
 {
+	unsigned long flags;
 	int cpu = get_cpu();
 
 	__sched_fork(p);
@@ -2678,16 +2794,16 @@ void sched_fork(struct task_struct *p, int clone_flags)
 	 *
 	 * Silence PROVE_RCU.
 	 */
-	rcu_read_lock();
+	raw_spin_lock_irqsave(&p->pi_lock, flags);
 	set_task_cpu(p, cpu);
-	rcu_read_unlock();
+	raw_spin_unlock_irqrestore(&p->pi_lock, flags);
 
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 	if (likely(sched_info_on()))
 		memset(&p->sched_info, 0, sizeof(p->sched_info));
 #endif
-#if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
-	p->oncpu = 0;
+#if defined(CONFIG_SMP)
+	p->on_cpu = 0;
 #endif
 #ifdef CONFIG_PREEMPT
 	/* Want to start with kernel preemption disabled. */
@@ -2707,41 +2823,31 @@ void sched_fork(struct task_struct *p, int clone_flags)
  * that must be done for every newly created context, then puts the task
  * on the runqueue and wakes it.
  */
-void wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
+void wake_up_new_task(struct task_struct *p)
 {
 	unsigned long flags;
 	struct rq *rq;
-	int cpu __maybe_unused = get_cpu();
 
+	raw_spin_lock_irqsave(&p->pi_lock, flags);
 #ifdef CONFIG_SMP
-	rq = task_rq_lock(p, &flags);
-	p->state = TASK_WAKING;
-
 	/*
 	 * Fork balancing, do it here and not earlier because:
 	 *  - cpus_allowed can change in the fork path
 	 *  - any previously selected cpu might disappear through hotplug
-	 *
-	 * We set TASK_WAKING so that select_task_rq() can drop rq->lock
-	 * without people poking at ->cpus_allowed.
 	 */
-	cpu = select_task_rq(rq, p, SD_BALANCE_FORK, 0);
-	set_task_cpu(p, cpu);
-
-	p->state = TASK_RUNNING;
-	task_rq_unlock(rq, &flags);
+	set_task_cpu(p, select_task_rq(p, SD_BALANCE_FORK, 0));
 #endif
 
-	rq = task_rq_lock(p, &flags);
+	rq = __task_rq_lock(p);
 	activate_task(rq, p, 0);
-	trace_sched_wakeup_new(p, 1);
+	p->on_rq = 1;
+	trace_sched_wakeup_new(p, true);
 	check_preempt_curr(rq, p, WF_FORK);
 #ifdef CONFIG_SMP
 	if (p->sched_class->task_woken)
 		p->sched_class->task_woken(rq, p);
 #endif
-	task_rq_unlock(rq, &flags);
-	put_cpu();
+	task_rq_unlock(rq, p, &flags);
 }
 
 #ifdef CONFIG_PREEMPT_NOTIFIERS
@@ -3450,27 +3556,22 @@ void sched_exec(void)
 {
 	struct task_struct *p = current;
 	unsigned long flags;
-	struct rq *rq;
 	int dest_cpu;
 
-	rq = task_rq_lock(p, &flags);
-	dest_cpu = p->sched_class->select_task_rq(rq, p, SD_BALANCE_EXEC, 0);
+	raw_spin_lock_irqsave(&p->pi_lock, flags);
+	dest_cpu = p->sched_class->select_task_rq(p, SD_BALANCE_EXEC, 0);
 	if (dest_cpu == smp_processor_id())
 		goto unlock;
 
-	/*
-	 * select_task_rq() can race against ->cpus_allowed
-	 */
-	if (cpumask_test_cpu(dest_cpu, &p->cpus_allowed) &&
-	    likely(cpu_active(dest_cpu)) && migrate_task(p, rq)) {
+	if (likely(cpu_active(dest_cpu))) {
 		struct migration_arg arg = { p, dest_cpu };
 
-		task_rq_unlock(rq, &flags);
-		stop_one_cpu(cpu_of(rq), migration_cpu_stop, &arg);
+		raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+		stop_one_cpu(task_cpu(p), migration_cpu_stop, &arg);
 		return;
 	}
 unlock:
-	task_rq_unlock(rq, &flags);
+	raw_spin_unlock_irqrestore(&p->pi_lock, flags);
 }
 
 #endif
@@ -3507,7 +3608,7 @@ unsigned long long task_delta_exec(struct task_struct *p)
 
 	rq = task_rq_lock(p, &flags);
 	ns = do_task_delta_exec(p, rq);
-	task_rq_unlock(rq, &flags);
+	task_rq_unlock(rq, p, &flags);
 
 	return ns;
 }
@@ -3525,7 +3626,7 @@ unsigned long long task_sched_runtime(struct task_struct *p)
 
 	rq = task_rq_lock(p, &flags);
 	ns = p->se.sum_exec_runtime + do_task_delta_exec(p, rq);
-	task_rq_unlock(rq, &flags);
+	task_rq_unlock(rq, p, &flags);
 
 	return ns;
 }
@@ -3549,7 +3650,7 @@ unsigned long long thread_group_sched_runtime(struct task_struct *p)
 	rq = task_rq_lock(p, &flags);
 	thread_group_cputime(p, &totals);
 	ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq);
-	task_rq_unlock(rq, &flags);
+	task_rq_unlock(rq, p, &flags);
 
 	return ns;
 }
@@ -3903,9 +4004,6 @@ void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
 /*
  * This function gets called by the timer code, with HZ frequency.
  * We call it with interrupts disabled.
- *
- * It also gets called by the fork code, when changing the parent's
- * timeslices.
  */
 void scheduler_tick(void)
 {
@@ -4025,17 +4123,11 @@ static inline void schedule_debug(struct task_struct *prev)
 	profile_hit(SCHED_PROFILING, __builtin_return_address(0));
 
 	schedstat_inc(this_rq(), sched_count);
-#ifdef CONFIG_SCHEDSTATS
-	if (unlikely(prev->lock_depth >= 0)) {
-		schedstat_inc(this_rq(), rq_sched_info.bkl_count);
-		schedstat_inc(prev, sched_info.bkl_count);
-	}
-#endif
 }
 
 static void put_prev_task(struct rq *rq, struct task_struct *prev)
 {
-	if (prev->se.on_rq)
+	if (prev->on_rq || rq->skip_clock_update < 0)
 		update_rq_clock(rq);
 	prev->sched_class->put_prev_task(rq, prev);
 }
@@ -4097,11 +4189,13 @@ need_resched:
 		if (unlikely(signal_pending_state(prev->state, prev))) {
 			prev->state = TASK_RUNNING;
 		} else {
+			deactivate_task(rq, prev, DEQUEUE_SLEEP);
+			prev->on_rq = 0;
+
 			/*
-			 * If a worker is going to sleep, notify and
-			 * ask workqueue whether it wants to wake up a
-			 * task to maintain concurrency.  If so, wake
-			 * up the task.
+			 * If a worker went to sleep, notify and ask workqueue
+			 * whether it wants to wake up a task to maintain
+			 * concurrency.
 			 */
 			if (prev->flags & PF_WQ_WORKER) {
 				struct task_struct *to_wakeup;
@@ -4110,21 +4204,20 @@ need_resched:
 				if (to_wakeup)
 					try_to_wake_up_local(to_wakeup);
 			}
-			deactivate_task(rq, prev, DEQUEUE_SLEEP);
+
+			/*
+			 * If we are going to sleep and we have plugged IO
+			 * queued, make sure to submit it to avoid deadlocks.
+			 */
+			if (blk_needs_flush_plug(prev)) {
+				raw_spin_unlock(&rq->lock);
+				blk_schedule_flush_plug(prev);
+				raw_spin_lock(&rq->lock);
+			}
 		}
 		switch_count = &prev->nvcsw;
 	}
 
-	/*
-	 * If we are going to sleep and we have plugged IO queued, make
-	 * sure to submit it to avoid deadlocks.
-	 */
-	if (prev->state != TASK_RUNNING && blk_needs_flush_plug(prev)) {
-		raw_spin_unlock(&rq->lock);
-		blk_flush_plug(prev);
-		raw_spin_lock(&rq->lock);
-	}
-
 	pre_schedule(rq, prev);
 
 	if (unlikely(!rq->nr_running))
@@ -4161,70 +4254,53 @@ need_resched:
 EXPORT_SYMBOL(schedule);
 
 #ifdef CONFIG_MUTEX_SPIN_ON_OWNER
-/*
- * Look out! "owner" is an entirely speculative pointer
- * access and not reliable.
- */
-int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner)
-{
-	unsigned int cpu;
-	struct rq *rq;
 
-	if (!sched_feat(OWNER_SPIN))
-		return 0;
+static inline bool owner_running(struct mutex *lock, struct task_struct *owner)
+{
+	bool ret = false;
 
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	/*
-	 * Need to access the cpu field knowing that
-	 * DEBUG_PAGEALLOC could have unmapped it if
-	 * the mutex owner just released it and exited.
-	 */
-	if (probe_kernel_address(&owner->cpu, cpu))
-		return 0;
-#else
-	cpu = owner->cpu;
-#endif
+	rcu_read_lock();
+	if (lock->owner != owner)
+		goto fail;
 
 	/*
-	 * Even if the access succeeded (likely case),
-	 * the cpu field may no longer be valid.
+	 * Ensure we emit the owner->on_cpu, dereference _after_ checking
+	 * lock->owner still matches owner, if that fails, owner might
+	 * point to free()d memory, if it still matches, the rcu_read_lock()
+	 * ensures the memory stays valid.
 	 */
-	if (cpu >= nr_cpumask_bits)
-		return 0;
+	barrier();
 
-	/*
-	 * We need to validate that we can do a
-	 * get_cpu() and that we have the percpu area.
-	 */
-	if (!cpu_online(cpu))
-		return 0;
+	ret = owner->on_cpu;
+fail:
+	rcu_read_unlock();
 
-	rq = cpu_rq(cpu);
+	return ret;
+}
 
-	for (;;) {
-		/*
-		 * Owner changed, break to re-assess state.
-		 */
-		if (lock->owner != owner) {
-			/*
-			 * If the lock has switched to a different owner,
-			 * we likely have heavy contention. Return 0 to quit
-			 * optimistic spinning and not contend further:
-			 */
-			if (lock->owner)
-				return 0;
-			break;
-		}
+/*
+ * Look out! "owner" is an entirely speculative pointer
+ * access and not reliable.
+ */
+int mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner)
+{
+	if (!sched_feat(OWNER_SPIN))
+		return 0;
 
-		/*
-		 * Is that owner really running on that cpu?
-		 */
-		if (task_thread_info(rq->curr) != owner || need_resched())
+	while (owner_running(lock, owner)) {
+		if (need_resched())
 			return 0;
 
 		arch_mutex_cpu_relax();
 	}
 
+	/*
+	 * If the owner changed to another task there is likely
+	 * heavy contention, stop spinning.
+	 */
+	if (lock->owner)
+		return 0;
+
 	return 1;
 }
 #endif
@@ -4684,19 +4760,18 @@ EXPORT_SYMBOL(sleep_on_timeout);
  */
 void rt_mutex_setprio(struct task_struct *p, int prio)
 {
-	unsigned long flags;
 	int oldprio, on_rq, running;
 	struct rq *rq;
 	const struct sched_class *prev_class;
 
 	BUG_ON(prio < 0 || prio > MAX_PRIO);
 
-	rq = task_rq_lock(p, &flags);
+	rq = __task_rq_lock(p);
 
 	trace_sched_pi_setprio(p, prio);
 	oldprio = p->prio;
 	prev_class = p->sched_class;
-	on_rq = p->se.on_rq;
+	on_rq = p->on_rq;
 	running = task_current(rq, p);
 	if (on_rq)
 		dequeue_task(rq, p, 0);
@@ -4716,7 +4791,7 @@ void rt_mutex_setprio(struct task_struct *p, int prio)
 		enqueue_task(rq, p, oldprio < prio ? ENQUEUE_HEAD : 0);
 
 	check_class_changed(rq, p, prev_class, oldprio);
-	task_rq_unlock(rq, &flags);
+	__task_rq_unlock(rq);
 }
 
 #endif
@@ -4744,7 +4819,7 @@ void set_user_nice(struct task_struct *p, long nice)
 		p->static_prio = NICE_TO_PRIO(nice);
 		goto out_unlock;
 	}
-	on_rq = p->se.on_rq;
+	on_rq = p->on_rq;
 	if (on_rq)
 		dequeue_task(rq, p, 0);
 
@@ -4764,7 +4839,7 @@ void set_user_nice(struct task_struct *p, long nice)
 			resched_task(rq->curr);
 	}
 out_unlock:
-	task_rq_unlock(rq, &flags);
+	task_rq_unlock(rq, p, &flags);
 }
 EXPORT_SYMBOL(set_user_nice);
 
@@ -4878,8 +4953,6 @@ static struct task_struct *find_process_by_pid(pid_t pid)
 static void
 __setscheduler(struct rq *rq, struct task_struct *p, int policy, int prio)
 {
-	BUG_ON(p->se.on_rq);
-
 	p->policy = policy;
 	p->rt_priority = prio;
 	p->normal_prio = normal_prio(p);
@@ -4994,21 +5067,29 @@ recheck:
 	/*
 	 * make sure no PI-waiters arrive (or leave) while we are
 	 * changing the priority of the task:
-	 */
-	raw_spin_lock_irqsave(&p->pi_lock, flags);
-	/*
-	 * To be able to change p->policy safely, the apropriate
+	 *
+	 * To be able to change p->policy safely, the appropriate
 	 * runqueue lock must be held.
 	 */
-	rq = __task_rq_lock(p);
+	rq = task_rq_lock(p, &flags);
 
 	/*
 	 * Changing the policy of the stop threads its a very bad idea
 	 */
 	if (p == rq->stop) {
+		task_rq_unlock(rq, p, &flags);
+		return -EINVAL;
+	}
+
+	/*
+	 * If not changing anything there's no need to proceed further:
+	 */
+	if (unlikely(policy == p->policy && (!rt_policy(policy) ||
+			param->sched_priority == p->rt_priority))) {
+
 		__task_rq_unlock(rq);
 		raw_spin_unlock_irqrestore(&p->pi_lock, flags);
-		return -EINVAL;
+		return 0;
 	}
 
 #ifdef CONFIG_RT_GROUP_SCHED
@@ -5020,8 +5101,7 @@ recheck:
 		if (rt_bandwidth_enabled() && rt_policy(policy) &&
 				task_group(p)->rt_bandwidth.rt_runtime == 0 &&
 				!task_group_is_autogroup(task_group(p))) {
-			__task_rq_unlock(rq);
-			raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+			task_rq_unlock(rq, p, &flags);
 			return -EPERM;
 		}
 	}
@@ -5030,11 +5110,10 @@ recheck:
 	/* recheck policy now with rq lock held */
 	if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
 		policy = oldpolicy = -1;
-		__task_rq_unlock(rq);
-		raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+		task_rq_unlock(rq, p, &flags);
 		goto recheck;
 	}
-	on_rq = p->se.on_rq;
+	on_rq = p->on_rq;
 	running = task_current(rq, p);
 	if (on_rq)
 		deactivate_task(rq, p, 0);
@@ -5053,8 +5132,7 @@ recheck:
 		activate_task(rq, p, 0);
 
 	check_class_changed(rq, p, prev_class, oldprio);
-	__task_rq_unlock(rq);
-	raw_spin_unlock_irqrestore(&p->pi_lock, flags);
+	task_rq_unlock(rq, p, &flags);
 
 	rt_mutex_adjust_pi(p);
 
@@ -5305,7 +5383,6 @@ long sched_getaffinity(pid_t pid, struct cpumask *mask)
 {
 	struct task_struct *p;
 	unsigned long flags;
-	struct rq *rq;
 	int retval;
 
 	get_online_cpus();
@@ -5320,9 +5397,9 @@ long sched_getaffinity(pid_t pid, struct cpumask *mask)
 	if (retval)
 		goto out_unlock;
 
-	rq = task_rq_lock(p, &flags);
+	raw_spin_lock_irqsave(&p->pi_lock, flags);
 	cpumask_and(mask, &p->cpus_allowed, cpu_online_mask);
-	task_rq_unlock(rq, &flags);
+	raw_spin_unlock_irqrestore(&p->pi_lock, flags);
 
 out_unlock:
 	rcu_read_unlock();
@@ -5647,7 +5724,7 @@ SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid,
 
 	rq = task_rq_lock(p, &flags);
 	time_slice = p->sched_class->get_rr_interval(rq, p);
-	task_rq_unlock(rq, &flags);
+	task_rq_unlock(rq, p, &flags);
 
 	rcu_read_unlock();
 	jiffies_to_timespec(time_slice, &t);
@@ -5705,7 +5782,7 @@ void show_state_filter(unsigned long state_filter)
 	do_each_thread(g, p) {
 		/*
 		 * reset the NMI-timeout, listing all files on a slow
-		 * console might take alot of time:
+		 * console might take a lot of time:
 		 */
 		touch_nmi_watchdog();
 		if (!state_filter || (p->state & state_filter))
@@ -5765,17 +5842,14 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu)
 	rcu_read_unlock();
 
 	rq->curr = rq->idle = idle;
-#if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
-	idle->oncpu = 1;
+#if defined(CONFIG_SMP)
+	idle->on_cpu = 1;
 #endif
 	raw_spin_unlock_irqrestore(&rq->lock, flags);
 
 	/* Set the preempt count _outside_ the spinlocks! */
-#if defined(CONFIG_PREEMPT)
-	task_thread_info(idle)->preempt_count = (idle->lock_depth >= 0);
-#else
 	task_thread_info(idle)->preempt_count = 0;
-#endif
+
 	/*
 	 * The idle tasks have their own, simple scheduling class:
 	 */
@@ -5870,26 +5944,17 @@ int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask)
 	unsigned int dest_cpu;
 	int ret = 0;
 
-	/*
-	 * Serialize against TASK_WAKING so that ttwu() and wunt() can
-	 * drop the rq->lock and still rely on ->cpus_allowed.
-	 */
-again:
-	while (task_is_waking(p))
-		cpu_relax();
 	rq = task_rq_lock(p, &flags);
-	if (task_is_waking(p)) {
-		task_rq_unlock(rq, &flags);
-		goto again;
-	}
+
+	if (cpumask_equal(&p->cpus_allowed, new_mask))
+		goto out;
 
 	if (!cpumask_intersects(new_mask, cpu_active_mask)) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	if (unlikely((p->flags & PF_THREAD_BOUND) && p != current &&
-		     !cpumask_equal(&p->cpus_allowed, new_mask))) {
+	if (unlikely((p->flags & PF_THREAD_BOUND) && p != current)) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -5906,16 +5971,16 @@ again:
 		goto out;
 
 	dest_cpu = cpumask_any_and(cpu_active_mask, new_mask);
-	if (migrate_task(p, rq)) {
+	if (p->on_rq) {
 		struct migration_arg arg = { p, dest_cpu };
 		/* Need help from migration thread: drop lock and wait. */
-		task_rq_unlock(rq, &flags);
+		task_rq_unlock(rq, p, &flags);
 		stop_one_cpu(cpu_of(rq), migration_cpu_stop, &arg);
 		tlb_migrate_finish(p->mm);
 		return 0;
 	}
 out:
-	task_rq_unlock(rq, &flags);
+	task_rq_unlock(rq, p, &flags);
 
 	return ret;
 }
@@ -5943,6 +6008,7 @@ static int __migrate_task(struct task_struct *p, int src_cpu, int dest_cpu)
 	rq_src = cpu_rq(src_cpu);
 	rq_dest = cpu_rq(dest_cpu);
 
+	raw_spin_lock(&p->pi_lock);
 	double_rq_lock(rq_src, rq_dest);
 	/* Already moved. */
 	if (task_cpu(p) != src_cpu)
@@ -5955,7 +6021,7 @@ static int __migrate_task(struct task_struct *p, int src_cpu, int dest_cpu)
 	 * If we're not on a rq, the next wake-up will ensure we're
 	 * placed properly.
 	 */
-	if (p->se.on_rq) {
+	if (p->on_rq) {
 		deactivate_task(rq_src, p, 0);
 		set_task_cpu(p, dest_cpu);
 		activate_task(rq_dest, p, 0);
@@ -5965,6 +6031,7 @@ done:
 	ret = 1;
 fail:
 	double_rq_unlock(rq_src, rq_dest);
+	raw_spin_unlock(&p->pi_lock);
 	return ret;
 }
 
@@ -6305,6 +6372,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 
 #ifdef CONFIG_HOTPLUG_CPU
 	case CPU_DYING:
+		sched_ttwu_pending();
 		/* Update our root-domain */
 		raw_spin_lock_irqsave(&rq->lock, flags);
 		if (rq->rd) {
@@ -6320,6 +6388,9 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		break;
 #endif
 	}
+
+	update_max_interval();
+
 	return NOTIFY_OK;
 }
 
@@ -6380,6 +6451,8 @@ early_initcall(migration_init);
 
 #ifdef CONFIG_SMP
 
+static cpumask_var_t sched_domains_tmpmask; /* sched_domains_mutex */
+
 #ifdef CONFIG_SCHED_DEBUG
 
 static __read_mostly int sched_domain_debug_enabled;
@@ -6475,7 +6548,6 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level,
 
 static void sched_domain_debug(struct sched_domain *sd, int cpu)
 {
-	cpumask_var_t groupmask;
 	int level = 0;
 
 	if (!sched_domain_debug_enabled)
@@ -6488,20 +6560,14 @@ static void sched_domain_debug(struct sched_domain *sd, int cpu)
 
 	printk(KERN_DEBUG "CPU%d attaching sched-domain:\n", cpu);
 
-	if (!alloc_cpumask_var(&groupmask, GFP_KERNEL)) {
-		printk(KERN_DEBUG "Cannot load-balance (out of memory)\n");
-		return;
-	}
-
 	for (;;) {
-		if (sched_domain_debug_one(sd, cpu, level, groupmask))
+		if (sched_domain_debug_one(sd, cpu, level, sched_domains_tmpmask))
 			break;
 		level++;
 		sd = sd->parent;
 		if (!sd)
 			break;
 	}
-	free_cpumask_var(groupmask);
 }
 #else /* !CONFIG_SCHED_DEBUG */
 # define sched_domain_debug(sd, cpu) do { } while (0)
@@ -6558,12 +6624,11 @@ sd_parent_degenerate(struct sched_domain *sd, struct sched_domain *parent)
 	return 1;
 }
 
-static void free_rootdomain(struct root_domain *rd)
+static void free_rootdomain(struct rcu_head *rcu)
 {
-	synchronize_sched();
+	struct root_domain *rd = container_of(rcu, struct root_domain, rcu);
 
 	cpupri_cleanup(&rd->cpupri);
-
 	free_cpumask_var(rd->rto_mask);
 	free_cpumask_var(rd->online);
 	free_cpumask_var(rd->span);
@@ -6604,7 +6669,7 @@ static void rq_attach_root(struct rq *rq, struct root_domain *rd)
 	raw_spin_unlock_irqrestore(&rq->lock, flags);
 
 	if (old_rd)
-		free_rootdomain(old_rd);
+		call_rcu_sched(&old_rd->rcu, free_rootdomain);
 }
 
 static int init_rootdomain(struct root_domain *rd)
@@ -6655,6 +6720,25 @@ static struct root_domain *alloc_rootdomain(void)
 	return rd;
 }
 
+static void free_sched_domain(struct rcu_head *rcu)
+{
+	struct sched_domain *sd = container_of(rcu, struct sched_domain, rcu);
+	if (atomic_dec_and_test(&sd->groups->ref))
+		kfree(sd->groups);
+	kfree(sd);
+}
+
+static void destroy_sched_domain(struct sched_domain *sd, int cpu)
+{
+	call_rcu(&sd->rcu, free_sched_domain);
+}
+
+static void destroy_sched_domains(struct sched_domain *sd, int cpu)
+{
+	for (; sd; sd = sd->parent)
+		destroy_sched_domain(sd, cpu);
+}
+
 /*
  * Attach the domain 'sd' to 'cpu' as its base domain. Callers must
  * hold the hotplug lock.
@@ -6665,9 +6749,6 @@ cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu)
 	struct rq *rq = cpu_rq(cpu);
 	struct sched_domain *tmp;
 
-	for (tmp = sd; tmp; tmp = tmp->parent)
-		tmp->span_weight = cpumask_weight(sched_domain_span(tmp));
-
 	/* Remove the sched domains which do not contribute to scheduling. */
 	for (tmp = sd; tmp; ) {
 		struct sched_domain *parent = tmp->parent;
@@ -6678,12 +6759,15 @@ cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu)
 			tmp->parent = parent->parent;
 			if (parent->parent)
 				parent->parent->child = tmp;
+			destroy_sched_domain(parent, cpu);
 		} else
 			tmp = tmp->parent;
 	}
 
 	if (sd && sd_degenerate(sd)) {
+		tmp = sd;
 		sd = sd->parent;
+		destroy_sched_domain(tmp, cpu);
 		if (sd)
 			sd->child = NULL;
 	}
@@ -6691,7 +6775,9 @@ cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu)
 	sched_domain_debug(sd, cpu);
 
 	rq_attach_root(rq, rd);
+	tmp = rq->sd;
 	rcu_assign_pointer(rq->sd, sd);
+	destroy_sched_domains(tmp, cpu);
 }
 
 /* cpus with isolated domains */
@@ -6707,56 +6793,6 @@ static int __init isolated_cpu_setup(char *str)
 
 __setup("isolcpus=", isolated_cpu_setup);
 
-/*
- * init_sched_build_groups takes the cpumask we wish to span, and a pointer
- * to a function which identifies what group(along with sched group) a CPU
- * belongs to. The return value of group_fn must be a >= 0 and < nr_cpu_ids
- * (due to the fact that we keep track of groups covered with a struct cpumask).
- *
- * init_sched_build_groups will build a circular linked list of the groups
- * covered by the given span, and will set each group's ->cpumask correctly,
- * and ->cpu_power to 0.
- */
-static void
-init_sched_build_groups(const struct cpumask *span,
-			const struct cpumask *cpu_map,
-			int (*group_fn)(int cpu, const struct cpumask *cpu_map,
-					struct sched_group **sg,
-					struct cpumask *tmpmask),
-			struct cpumask *covered, struct cpumask *tmpmask)
-{
-	struct sched_group *first = NULL, *last = NULL;
-	int i;
-
-	cpumask_clear(covered);
-
-	for_each_cpu(i, span) {
-		struct sched_group *sg;
-		int group = group_fn(i, cpu_map, &sg, tmpmask);
-		int j;
-
-		if (cpumask_test_cpu(i, covered))
-			continue;
-
-		cpumask_clear(sched_group_cpus(sg));
-		sg->cpu_power = 0;
-
-		for_each_cpu(j, span) {
-			if (group_fn(j, cpu_map, NULL, tmpmask) != group)
-				continue;
-
-			cpumask_set_cpu(j, covered);
-			cpumask_set_cpu(j, sched_group_cpus(sg));
-		}
-		if (!first)
-			first = sg;
-		if (last)
-			last->next = sg;
-		last = sg;
-	}
-	last->next = first;
-}
-
 #define SD_NODES_PER_DOMAIN 16
 
 #ifdef CONFIG_NUMA
@@ -6773,7 +6809,7 @@ init_sched_build_groups(const struct cpumask *span,
  */
 static int find_next_best_node(int node, nodemask_t *used_nodes)
 {
-	int i, n, val, min_val, best_node = 0;
+	int i, n, val, min_val, best_node = -1;
 
 	min_val = INT_MAX;
 
@@ -6797,7 +6833,8 @@ static int find_next_best_node(int node, nodemask_t *used_nodes)
 		}
 	}
 
-	node_set(best_node, *used_nodes);
+	if (best_node != -1)
+		node_set(best_node, *used_nodes);
 	return best_node;
 }
 
@@ -6823,315 +6860,130 @@ static void sched_domain_node_span(int node, struct cpumask *span)
 
 	for (i = 1; i < SD_NODES_PER_DOMAIN; i++) {
 		int next_node = find_next_best_node(node, &used_nodes);
-
+		if (next_node < 0)
+			break;
 		cpumask_or(span, span, cpumask_of_node(next_node));
 	}
 }
+
+static const struct cpumask *cpu_node_mask(int cpu)
+{
+	lockdep_assert_held(&sched_domains_mutex);
+
+	sched_domain_node_span(cpu_to_node(cpu), sched_domains_tmpmask);
+
+	return sched_domains_tmpmask;
+}
+
+static const struct cpumask *cpu_allnodes_mask(int cpu)
+{
+	return cpu_possible_mask;
+}
 #endif /* CONFIG_NUMA */
 
-int sched_smt_power_savings = 0, sched_mc_power_savings = 0;
+static const struct cpumask *cpu_cpu_mask(int cpu)
+{
+	return cpumask_of_node(cpu_to_node(cpu));
+}
 
-/*
- * The cpus mask in sched_group and sched_domain hangs off the end.
- *
- * ( See the the comments in include/linux/sched.h:struct sched_group
- *   and struct sched_domain. )
- */
-struct static_sched_group {
-	struct sched_group sg;
-	DECLARE_BITMAP(cpus, CONFIG_NR_CPUS);
-};
+int sched_smt_power_savings = 0, sched_mc_power_savings = 0;
 
-struct static_sched_domain {
-	struct sched_domain sd;
-	DECLARE_BITMAP(span, CONFIG_NR_CPUS);
+struct sd_data {
+	struct sched_domain **__percpu sd;
+	struct sched_group **__percpu sg;
 };
 
 struct s_data {
-#ifdef CONFIG_NUMA
-	int			sd_allnodes;
-	cpumask_var_t		domainspan;
-	cpumask_var_t		covered;
-	cpumask_var_t		notcovered;
-#endif
-	cpumask_var_t		nodemask;
-	cpumask_var_t		this_sibling_map;
-	cpumask_var_t		this_core_map;
-	cpumask_var_t		this_book_map;
-	cpumask_var_t		send_covered;
-	cpumask_var_t		tmpmask;
-	struct sched_group	**sched_group_nodes;
+	struct sched_domain ** __percpu sd;
 	struct root_domain	*rd;
 };
 
 enum s_alloc {
-	sa_sched_groups = 0,
 	sa_rootdomain,
-	sa_tmpmask,
-	sa_send_covered,
-	sa_this_book_map,
-	sa_this_core_map,
-	sa_this_sibling_map,
-	sa_nodemask,
-	sa_sched_group_nodes,
-#ifdef CONFIG_NUMA
-	sa_notcovered,
-	sa_covered,
-	sa_domainspan,
-#endif
+	sa_sd,
+	sa_sd_storage,
 	sa_none,
 };
 
-/*
- * SMT sched-domains:
- */
-#ifdef CONFIG_SCHED_SMT
-static DEFINE_PER_CPU(struct static_sched_domain, cpu_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_groups);
+struct sched_domain_topology_level;
 
-static int
-cpu_to_cpu_group(int cpu, const struct cpumask *cpu_map,
-		 struct sched_group **sg, struct cpumask *unused)
-{
-	if (sg)
-		*sg = &per_cpu(sched_groups, cpu).sg;
-	return cpu;
-}
-#endif /* CONFIG_SCHED_SMT */
-
-/*
- * multi-core sched-domains:
- */
-#ifdef CONFIG_SCHED_MC
-static DEFINE_PER_CPU(struct static_sched_domain, core_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_group_core);
+typedef struct sched_domain *(*sched_domain_init_f)(struct sched_domain_topology_level *tl, int cpu);
+typedef const struct cpumask *(*sched_domain_mask_f)(int cpu);
 
-static int
-cpu_to_core_group(int cpu, const struct cpumask *cpu_map,
-		  struct sched_group **sg, struct cpumask *mask)
-{
-	int group;
-#ifdef CONFIG_SCHED_SMT
-	cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
-	group = cpumask_first(mask);
-#else
-	group = cpu;
-#endif
-	if (sg)
-		*sg = &per_cpu(sched_group_core, group).sg;
-	return group;
-}
-#endif /* CONFIG_SCHED_MC */
+struct sched_domain_topology_level {
+	sched_domain_init_f init;
+	sched_domain_mask_f mask;
+	struct sd_data      data;
+};
 
 /*
- * book sched-domains:
+ * Assumes the sched_domain tree is fully constructed
  */
-#ifdef CONFIG_SCHED_BOOK
-static DEFINE_PER_CPU(struct static_sched_domain, book_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_group_book);
-
-static int
-cpu_to_book_group(int cpu, const struct cpumask *cpu_map,
-		  struct sched_group **sg, struct cpumask *mask)
+static int get_group(int cpu, struct sd_data *sdd, struct sched_group **sg)
 {
-	int group = cpu;
-#ifdef CONFIG_SCHED_MC
-	cpumask_and(mask, cpu_coregroup_mask(cpu), cpu_map);
-	group = cpumask_first(mask);
-#elif defined(CONFIG_SCHED_SMT)
-	cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
-	group = cpumask_first(mask);
-#endif
-	if (sg)
-		*sg = &per_cpu(sched_group_book, group).sg;
-	return group;
-}
-#endif /* CONFIG_SCHED_BOOK */
+	struct sched_domain *sd = *per_cpu_ptr(sdd->sd, cpu);
+	struct sched_domain *child = sd->child;
 
-static DEFINE_PER_CPU(struct static_sched_domain, phys_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_group_phys);
+	if (child)
+		cpu = cpumask_first(sched_domain_span(child));
 
-static int
-cpu_to_phys_group(int cpu, const struct cpumask *cpu_map,
-		  struct sched_group **sg, struct cpumask *mask)
-{
-	int group;
-#ifdef CONFIG_SCHED_BOOK
-	cpumask_and(mask, cpu_book_mask(cpu), cpu_map);
-	group = cpumask_first(mask);
-#elif defined(CONFIG_SCHED_MC)
-	cpumask_and(mask, cpu_coregroup_mask(cpu), cpu_map);
-	group = cpumask_first(mask);
-#elif defined(CONFIG_SCHED_SMT)
-	cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
-	group = cpumask_first(mask);
-#else
-	group = cpu;
-#endif
 	if (sg)
-		*sg = &per_cpu(sched_group_phys, group).sg;
-	return group;
+		*sg = *per_cpu_ptr(sdd->sg, cpu);
+
+	return cpu;
 }
 
-#ifdef CONFIG_NUMA
 /*
- * The init_sched_build_groups can't handle what we want to do with node
- * groups, so roll our own. Now each node has its own list of groups which
- * gets dynamically allocated.
+ * build_sched_groups takes the cpumask we wish to span, and a pointer
+ * to a function which identifies what group(along with sched group) a CPU
+ * belongs to. The return value of group_fn must be a >= 0 and < nr_cpu_ids
+ * (due to the fact that we keep track of groups covered with a struct cpumask).
+ *
+ * build_sched_groups will build a circular linked list of the groups
+ * covered by the given span, and will set each group's ->cpumask correctly,
+ * and ->cpu_power to 0.
  */
-static DEFINE_PER_CPU(struct static_sched_domain, node_domains);
-static struct sched_group ***sched_group_nodes_bycpu;
-
-static DEFINE_PER_CPU(struct static_sched_domain, allnodes_domains);
-static DEFINE_PER_CPU(struct static_sched_group, sched_group_allnodes);
-
-static int cpu_to_allnodes_group(int cpu, const struct cpumask *cpu_map,
-				 struct sched_group **sg,
-				 struct cpumask *nodemask)
-{
-	int group;
-
-	cpumask_and(nodemask, cpumask_of_node(cpu_to_node(cpu)), cpu_map);
-	group = cpumask_first(nodemask);
-
-	if (sg)
-		*sg = &per_cpu(sched_group_allnodes, group).sg;
-	return group;
-}
-
-static void init_numa_sched_groups_power(struct sched_group *group_head)
-{
-	struct sched_group *sg = group_head;
-	int j;
-
-	if (!sg)
-		return;
-	do {
-		for_each_cpu(j, sched_group_cpus(sg)) {
-			struct sched_domain *sd;
-
-			sd = &per_cpu(phys_domains, j).sd;
-			if (j != group_first_cpu(sd->groups)) {
-				/*
-				 * Only add "power" once for each
-				 * physical package.
-				 */
-				continue;
-			}
-
-			sg->cpu_power += sd->groups->cpu_power;
-		}
-		sg = sg->next;
-	} while (sg != group_head);
-}
-
-static int build_numa_sched_groups(struct s_data *d,
-				   const struct cpumask *cpu_map, int num)
+static void
+build_sched_groups(struct sched_domain *sd)
 {
-	struct sched_domain *sd;
-	struct sched_group *sg, *prev;
-	int n, j;
-
-	cpumask_clear(d->covered);
-	cpumask_and(d->nodemask, cpumask_of_node(num), cpu_map);
-	if (cpumask_empty(d->nodemask)) {
-		d->sched_group_nodes[num] = NULL;
-		goto out;
-	}
-
-	sched_domain_node_span(num, d->domainspan);
-	cpumask_and(d->domainspan, d->domainspan, cpu_map);
-
-	sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
-			  GFP_KERNEL, num);
-	if (!sg) {
-		printk(KERN_WARNING "Can not alloc domain group for node %d\n",
-		       num);
-		return -ENOMEM;
-	}
-	d->sched_group_nodes[num] = sg;
-
-	for_each_cpu(j, d->nodemask) {
-		sd = &per_cpu(node_domains, j).sd;
-		sd->groups = sg;
-	}
+	struct sched_group *first = NULL, *last = NULL;
+	struct sd_data *sdd = sd->private;
+	const struct cpumask *span = sched_domain_span(sd);
+	struct cpumask *covered;
+	int i;
 
-	sg->cpu_power = 0;
-	cpumask_copy(sched_group_cpus(sg), d->nodemask);
-	sg->next = sg;
-	cpumask_or(d->covered, d->covered, d->nodemask);
+	lockdep_assert_held(&sched_domains_mutex);
+	covered = sched_domains_tmpmask;
 
-	prev = sg;
-	for (j = 0; j < nr_node_ids; j++) {
-		n = (num + j) % nr_node_ids;
-		cpumask_complement(d->notcovered, d->covered);
-		cpumask_and(d->tmpmask, d->notcovered, cpu_map);
-		cpumask_and(d->tmpmask, d->tmpmask, d->domainspan);
-		if (cpumask_empty(d->tmpmask))
-			break;
-		cpumask_and(d->tmpmask, d->tmpmask, cpumask_of_node(n));
-		if (cpumask_empty(d->tmpmask))
-			continue;
-		sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
-				  GFP_KERNEL, num);
-		if (!sg) {
-			printk(KERN_WARNING
-			       "Can not alloc domain group for node %d\n", j);
-			return -ENOMEM;
-		}
-		sg->cpu_power = 0;
-		cpumask_copy(sched_group_cpus(sg), d->tmpmask);
-		sg->next = prev->next;
-		cpumask_or(d->covered, d->covered, d->tmpmask);
-		prev->next = sg;
-		prev = sg;
-	}
-out:
-	return 0;
-}
-#endif /* CONFIG_NUMA */
-
-#ifdef CONFIG_NUMA
-/* Free memory allocated for various sched_group structures */
-static void free_sched_groups(const struct cpumask *cpu_map,
-			      struct cpumask *nodemask)
-{
-	int cpu, i;
+	cpumask_clear(covered);
 
-	for_each_cpu(cpu, cpu_map) {
-		struct sched_group **sched_group_nodes
-			= sched_group_nodes_bycpu[cpu];
+	for_each_cpu(i, span) {
+		struct sched_group *sg;
+		int group = get_group(i, sdd, &sg);
+		int j;
 
-		if (!sched_group_nodes)
+		if (cpumask_test_cpu(i, covered))
 			continue;
 
-		for (i = 0; i < nr_node_ids; i++) {
-			struct sched_group *oldsg, *sg = sched_group_nodes[i];
+		cpumask_clear(sched_group_cpus(sg));
+		sg->cpu_power = 0;
 
-			cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
-			if (cpumask_empty(nodemask))
+		for_each_cpu(j, span) {
+			if (get_group(j, sdd, NULL) != group)
 				continue;
 
-			if (sg == NULL)
-				continue;
-			sg = sg->next;
-next_sg:
-			oldsg = sg;
-			sg = sg->next;
-			kfree(oldsg);
-			if (oldsg != sched_group_nodes[i])
-				goto next_sg;
+			cpumask_set_cpu(j, covered);
+			cpumask_set_cpu(j, sched_group_cpus(sg));
 		}
-		kfree(sched_group_nodes);
-		sched_group_nodes_bycpu[cpu] = NULL;
+
+		if (!first)
+			first = sg;
+		if (last)
+			last->next = sg;
+		last = sg;
 	}
+	last->next = first;
 }
-#else /* !CONFIG_NUMA */
-static void free_sched_groups(const struct cpumask *cpu_map,
-			      struct cpumask *nodemask)
-{
-}
-#endif /* CONFIG_NUMA */
 
 /*
  * Initialize sched groups cpu_power.
@@ -7145,11 +6997,6 @@ static void free_sched_groups(const struct cpumask *cpu_map,
  */
 static void init_sched_groups_power(int cpu, struct sched_domain *sd)
 {
-	struct sched_domain *child;
-	struct sched_group *group;
-	long power;
-	int weight;
-
 	WARN_ON(!sd || !sd->groups);
 
 	if (cpu != group_first_cpu(sd->groups))
@@ -7157,36 +7004,7 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
 
 	sd->groups->group_weight = cpumask_weight(sched_group_cpus(sd->groups));
 
-	child = sd->child;
-
-	sd->groups->cpu_power = 0;
-
-	if (!child) {
-		power = SCHED_LOAD_SCALE;
-		weight = cpumask_weight(sched_domain_span(sd));
-		/*
-		 * SMT siblings share the power of a single core.
-		 * Usually multiple threads get a better yield out of
-		 * that one core than a single thread would have,
-		 * reflect that in sd->smt_gain.
-		 */
-		if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) {
-			power *= sd->smt_gain;
-			power /= weight;
-			power >>= SCHED_LOAD_SHIFT;
-		}
-		sd->groups->cpu_power += power;
-		return;
-	}
-
-	/*
-	 * Add cpu_power of each child group to this groups cpu_power.
-	 */
-	group = child->groups;
-	do {
-		sd->groups->cpu_power += group->cpu_power;
-		group = group->next;
-	} while (group != child->groups);
+	update_group_power(sd, cpu);
 }
 
 /*
@@ -7200,15 +7018,15 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
 # define SD_INIT_NAME(sd, type)		do { } while (0)
 #endif
 
-#define	SD_INIT(sd, type)	sd_init_##type(sd)
-
-#define SD_INIT_FUNC(type)	\
-static noinline void sd_init_##type(struct sched_domain *sd)	\
-{								\
-	memset(sd, 0, sizeof(*sd));				\
-	*sd = SD_##type##_INIT;					\
-	sd->level = SD_LV_##type;				\
-	SD_INIT_NAME(sd, type);					\
+#define SD_INIT_FUNC(type)						\
+static noinline struct sched_domain *					\
+sd_init_##type(struct sched_domain_topology_level *tl, int cpu) 	\
+{									\
+	struct sched_domain *sd = *per_cpu_ptr(tl->data.sd, cpu);	\
+	*sd = SD_##type##_INIT;						\
+	SD_INIT_NAME(sd, type);						\
+	sd->private = &tl->data;					\
+	return sd;							\
 }
 
 SD_INIT_FUNC(CPU)
@@ -7227,13 +7045,14 @@ SD_INIT_FUNC(CPU)
 #endif
 
 static int default_relax_domain_level = -1;
+int sched_domain_level_max;
 
 static int __init setup_relax_domain_level(char *str)
 {
 	unsigned long val;
 
 	val = simple_strtoul(str, NULL, 0);
-	if (val < SD_LV_MAX)
+	if (val < sched_domain_level_max)
 		default_relax_domain_level = val;
 
 	return 1;
@@ -7261,37 +7080,20 @@ static void set_domain_attribute(struct sched_domain *sd,
 	}
 }
 
+static void __sdt_free(const struct cpumask *cpu_map);
+static int __sdt_alloc(const struct cpumask *cpu_map);
+
 static void __free_domain_allocs(struct s_data *d, enum s_alloc what,
 				 const struct cpumask *cpu_map)
 {
 	switch (what) {
-	case sa_sched_groups:
-		free_sched_groups(cpu_map, d->tmpmask); /* fall through */
-		d->sched_group_nodes = NULL;
 	case sa_rootdomain:
-		free_rootdomain(d->rd); /* fall through */
-	case sa_tmpmask:
-		free_cpumask_var(d->tmpmask); /* fall through */
-	case sa_send_covered:
-		free_cpumask_var(d->send_covered); /* fall through */
-	case sa_this_book_map:
-		free_cpumask_var(d->this_book_map); /* fall through */
-	case sa_this_core_map:
-		free_cpumask_var(d->this_core_map); /* fall through */
-	case sa_this_sibling_map:
-		free_cpumask_var(d->this_sibling_map); /* fall through */
-	case sa_nodemask:
-		free_cpumask_var(d->nodemask); /* fall through */
-	case sa_sched_group_nodes:
-#ifdef CONFIG_NUMA
-		kfree(d->sched_group_nodes); /* fall through */
-	case sa_notcovered:
-		free_cpumask_var(d->notcovered); /* fall through */
-	case sa_covered:
-		free_cpumask_var(d->covered); /* fall through */
-	case sa_domainspan:
-		free_cpumask_var(d->domainspan); /* fall through */
-#endif
+		if (!atomic_read(&d->rd->refcount))
+			free_rootdomain(&d->rd->rcu); /* fall through */
+	case sa_sd:
+		free_percpu(d->sd); /* fall through */
+	case sa_sd_storage:
+		__sdt_free(cpu_map); /* fall through */
 	case sa_none:
 		break;
 	}
@@ -7300,308 +7102,212 @@ static void __free_domain_allocs(struct s_data *d, enum s_alloc what,
 static enum s_alloc __visit_domain_allocation_hell(struct s_data *d,
 						   const struct cpumask *cpu_map)
 {
-#ifdef CONFIG_NUMA
-	if (!alloc_cpumask_var(&d->domainspan, GFP_KERNEL))
-		return sa_none;
-	if (!alloc_cpumask_var(&d->covered, GFP_KERNEL))
-		return sa_domainspan;
-	if (!alloc_cpumask_var(&d->notcovered, GFP_KERNEL))
-		return sa_covered;
-	/* Allocate the per-node list of sched groups */
-	d->sched_group_nodes = kcalloc(nr_node_ids,
-				      sizeof(struct sched_group *), GFP_KERNEL);
-	if (!d->sched_group_nodes) {
-		printk(KERN_WARNING "Can not alloc sched group node list\n");
-		return sa_notcovered;
-	}
-	sched_group_nodes_bycpu[cpumask_first(cpu_map)] = d->sched_group_nodes;
-#endif
-	if (!alloc_cpumask_var(&d->nodemask, GFP_KERNEL))
-		return sa_sched_group_nodes;
-	if (!alloc_cpumask_var(&d->this_sibling_map, GFP_KERNEL))
-		return sa_nodemask;
-	if (!alloc_cpumask_var(&d->this_core_map, GFP_KERNEL))
-		return sa_this_sibling_map;
-	if (!alloc_cpumask_var(&d->this_book_map, GFP_KERNEL))
-		return sa_this_core_map;
-	if (!alloc_cpumask_var(&d->send_covered, GFP_KERNEL))
-		return sa_this_book_map;
-	if (!alloc_cpumask_var(&d->tmpmask, GFP_KERNEL))
-		return sa_send_covered;
+	memset(d, 0, sizeof(*d));
+
+	if (__sdt_alloc(cpu_map))
+		return sa_sd_storage;
+	d->sd = alloc_percpu(struct sched_domain *);
+	if (!d->sd)
+		return sa_sd_storage;
 	d->rd = alloc_rootdomain();
-	if (!d->rd) {
-		printk(KERN_WARNING "Cannot alloc root domain\n");
-		return sa_tmpmask;
-	}
+	if (!d->rd)
+		return sa_sd;
 	return sa_rootdomain;
 }
 
-static struct sched_domain *__build_numa_sched_domains(struct s_data *d,
-	const struct cpumask *cpu_map, struct sched_domain_attr *attr, int i)
+/*
+ * NULL the sd_data elements we've used to build the sched_domain and
+ * sched_group structure so that the subsequent __free_domain_allocs()
+ * will not free the data we're using.
+ */
+static void claim_allocations(int cpu, struct sched_domain *sd)
 {
-	struct sched_domain *sd = NULL;
-#ifdef CONFIG_NUMA
-	struct sched_domain *parent;
-
-	d->sd_allnodes = 0;
-	if (cpumask_weight(cpu_map) >
-	    SD_NODES_PER_DOMAIN * cpumask_weight(d->nodemask)) {
-		sd = &per_cpu(allnodes_domains, i).sd;
-		SD_INIT(sd, ALLNODES);
-		set_domain_attribute(sd, attr);
-		cpumask_copy(sched_domain_span(sd), cpu_map);
-		cpu_to_allnodes_group(i, cpu_map, &sd->groups, d->tmpmask);
-		d->sd_allnodes = 1;
-	}
-	parent = sd;
-
-	sd = &per_cpu(node_domains, i).sd;
-	SD_INIT(sd, NODE);
-	set_domain_attribute(sd, attr);
-	sched_domain_node_span(cpu_to_node(i), sched_domain_span(sd));
-	sd->parent = parent;
-	if (parent)
-		parent->child = sd;
-	cpumask_and(sched_domain_span(sd), sched_domain_span(sd), cpu_map);
-#endif
-	return sd;
-}
+	struct sd_data *sdd = sd->private;
+	struct sched_group *sg = sd->groups;
 
-static struct sched_domain *__build_cpu_sched_domain(struct s_data *d,
-	const struct cpumask *cpu_map, struct sched_domain_attr *attr,
-	struct sched_domain *parent, int i)
-{
-	struct sched_domain *sd;
-	sd = &per_cpu(phys_domains, i).sd;
-	SD_INIT(sd, CPU);
-	set_domain_attribute(sd, attr);
-	cpumask_copy(sched_domain_span(sd), d->nodemask);
-	sd->parent = parent;
-	if (parent)
-		parent->child = sd;
-	cpu_to_phys_group(i, cpu_map, &sd->groups, d->tmpmask);
-	return sd;
-}
+	WARN_ON_ONCE(*per_cpu_ptr(sdd->sd, cpu) != sd);
+	*per_cpu_ptr(sdd->sd, cpu) = NULL;
 
-static struct sched_domain *__build_book_sched_domain(struct s_data *d,
-	const struct cpumask *cpu_map, struct sched_domain_attr *attr,
-	struct sched_domain *parent, int i)
-{
-	struct sched_domain *sd = parent;
-#ifdef CONFIG_SCHED_BOOK
-	sd = &per_cpu(book_domains, i).sd;
-	SD_INIT(sd, BOOK);
-	set_domain_attribute(sd, attr);
-	cpumask_and(sched_domain_span(sd), cpu_map, cpu_book_mask(i));
-	sd->parent = parent;
-	parent->child = sd;
-	cpu_to_book_group(i, cpu_map, &sd->groups, d->tmpmask);
-#endif
-	return sd;
+	if (cpu == cpumask_first(sched_group_cpus(sg))) {
+		WARN_ON_ONCE(*per_cpu_ptr(sdd->sg, cpu) != sg);
+		*per_cpu_ptr(sdd->sg, cpu) = NULL;
+	}
 }
 
-static struct sched_domain *__build_mc_sched_domain(struct s_data *d,
-	const struct cpumask *cpu_map, struct sched_domain_attr *attr,
-	struct sched_domain *parent, int i)
+#ifdef CONFIG_SCHED_SMT
+static const struct cpumask *cpu_smt_mask(int cpu)
 {
-	struct sched_domain *sd = parent;
-#ifdef CONFIG_SCHED_MC
-	sd = &per_cpu(core_domains, i).sd;
-	SD_INIT(sd, MC);
-	set_domain_attribute(sd, attr);
-	cpumask_and(sched_domain_span(sd), cpu_map, cpu_coregroup_mask(i));
-	sd->parent = parent;
-	parent->child = sd;
-	cpu_to_core_group(i, cpu_map, &sd->groups, d->tmpmask);
-#endif
-	return sd;
+	return topology_thread_cpumask(cpu);
 }
-
-static struct sched_domain *__build_smt_sched_domain(struct s_data *d,
-	const struct cpumask *cpu_map, struct sched_domain_attr *attr,
-	struct sched_domain *parent, int i)
-{
-	struct sched_domain *sd = parent;
-#ifdef CONFIG_SCHED_SMT
-	sd = &per_cpu(cpu_domains, i).sd;
-	SD_INIT(sd, SIBLING);
-	set_domain_attribute(sd, attr);
-	cpumask_and(sched_domain_span(sd), cpu_map, topology_thread_cpumask(i));
-	sd->parent = parent;
-	parent->child = sd;
-	cpu_to_cpu_group(i, cpu_map, &sd->groups, d->tmpmask);
 #endif
-	return sd;
-}
 
-static void build_sched_groups(struct s_data *d, enum sched_domain_level l,
-			       const struct cpumask *cpu_map, int cpu)
-{
-	switch (l) {
+/*
+ * Topology list, bottom-up.
+ */
+static struct sched_domain_topology_level default_topology[] = {
 #ifdef CONFIG_SCHED_SMT
-	case SD_LV_SIBLING: /* set up CPU (sibling) groups */
-		cpumask_and(d->this_sibling_map, cpu_map,
-			    topology_thread_cpumask(cpu));
-		if (cpu == cpumask_first(d->this_sibling_map))
-			init_sched_build_groups(d->this_sibling_map, cpu_map,
-						&cpu_to_cpu_group,
-						d->send_covered, d->tmpmask);
-		break;
+	{ sd_init_SIBLING, cpu_smt_mask, },
 #endif
 #ifdef CONFIG_SCHED_MC
-	case SD_LV_MC: /* set up multi-core groups */
-		cpumask_and(d->this_core_map, cpu_map, cpu_coregroup_mask(cpu));
-		if (cpu == cpumask_first(d->this_core_map))
-			init_sched_build_groups(d->this_core_map, cpu_map,
-						&cpu_to_core_group,
-						d->send_covered, d->tmpmask);
-		break;
+	{ sd_init_MC, cpu_coregroup_mask, },
 #endif
 #ifdef CONFIG_SCHED_BOOK
-	case SD_LV_BOOK: /* set up book groups */
-		cpumask_and(d->this_book_map, cpu_map, cpu_book_mask(cpu));
-		if (cpu == cpumask_first(d->this_book_map))
-			init_sched_build_groups(d->this_book_map, cpu_map,
-						&cpu_to_book_group,
-						d->send_covered, d->tmpmask);
-		break;
+	{ sd_init_BOOK, cpu_book_mask, },
 #endif
-	case SD_LV_CPU: /* set up physical groups */
-		cpumask_and(d->nodemask, cpumask_of_node(cpu), cpu_map);
-		if (!cpumask_empty(d->nodemask))
-			init_sched_build_groups(d->nodemask, cpu_map,
-						&cpu_to_phys_group,
-						d->send_covered, d->tmpmask);
-		break;
+	{ sd_init_CPU, cpu_cpu_mask, },
 #ifdef CONFIG_NUMA
-	case SD_LV_ALLNODES:
-		init_sched_build_groups(cpu_map, cpu_map, &cpu_to_allnodes_group,
-					d->send_covered, d->tmpmask);
-		break;
+	{ sd_init_NODE, cpu_node_mask, },
+	{ sd_init_ALLNODES, cpu_allnodes_mask, },
 #endif
-	default:
-		break;
+	{ NULL, },
+};
+
+static struct sched_domain_topology_level *sched_domain_topology = default_topology;
+
+static int __sdt_alloc(const struct cpumask *cpu_map)
+{
+	struct sched_domain_topology_level *tl;
+	int j;
+
+	for (tl = sched_domain_topology; tl->init; tl++) {
+		struct sd_data *sdd = &tl->data;
+
+		sdd->sd = alloc_percpu(struct sched_domain *);
+		if (!sdd->sd)
+			return -ENOMEM;
+
+		sdd->sg = alloc_percpu(struct sched_group *);
+		if (!sdd->sg)
+			return -ENOMEM;
+
+		for_each_cpu(j, cpu_map) {
+			struct sched_domain *sd;
+			struct sched_group *sg;
+
+		       	sd = kzalloc_node(sizeof(struct sched_domain) + cpumask_size(),
+					GFP_KERNEL, cpu_to_node(j));
+			if (!sd)
+				return -ENOMEM;
+
+			*per_cpu_ptr(sdd->sd, j) = sd;
+
+			sg = kzalloc_node(sizeof(struct sched_group) + cpumask_size(),
+					GFP_KERNEL, cpu_to_node(j));
+			if (!sg)
+				return -ENOMEM;
+
+			*per_cpu_ptr(sdd->sg, j) = sg;
+		}
+	}
+
+	return 0;
+}
+
+static void __sdt_free(const struct cpumask *cpu_map)
+{
+	struct sched_domain_topology_level *tl;
+	int j;
+
+	for (tl = sched_domain_topology; tl->init; tl++) {
+		struct sd_data *sdd = &tl->data;
+
+		for_each_cpu(j, cpu_map) {
+			kfree(*per_cpu_ptr(sdd->sd, j));
+			kfree(*per_cpu_ptr(sdd->sg, j));
+		}
+		free_percpu(sdd->sd);
+		free_percpu(sdd->sg);
 	}
 }
 
+struct sched_domain *build_sched_domain(struct sched_domain_topology_level *tl,
+		struct s_data *d, const struct cpumask *cpu_map,
+		struct sched_domain_attr *attr, struct sched_domain *child,
+		int cpu)
+{
+	struct sched_domain *sd = tl->init(tl, cpu);
+	if (!sd)
+		return child;
+
+	set_domain_attribute(sd, attr);
+	cpumask_and(sched_domain_span(sd), cpu_map, tl->mask(cpu));
+	if (child) {
+		sd->level = child->level + 1;
+		sched_domain_level_max = max(sched_domain_level_max, sd->level);
+		child->parent = sd;
+	}
+	sd->child = child;
+
+	return sd;
+}
+
 /*
  * Build sched domains for a given set of cpus and attach the sched domains
  * to the individual cpus
  */
-static int __build_sched_domains(const struct cpumask *cpu_map,
-				 struct sched_domain_attr *attr)
+static int build_sched_domains(const struct cpumask *cpu_map,
+			       struct sched_domain_attr *attr)
 {
 	enum s_alloc alloc_state = sa_none;
-	struct s_data d;
 	struct sched_domain *sd;
-	int i;
-#ifdef CONFIG_NUMA
-	d.sd_allnodes = 0;
-#endif
+	struct s_data d;
+	int i, ret = -ENOMEM;
 
 	alloc_state = __visit_domain_allocation_hell(&d, cpu_map);
 	if (alloc_state != sa_rootdomain)
 		goto error;
-	alloc_state = sa_sched_groups;
-
-	/*
-	 * Set up domains for cpus specified by the cpu_map.
-	 */
-	for_each_cpu(i, cpu_map) {
-		cpumask_and(d.nodemask, cpumask_of_node(cpu_to_node(i)),
-			    cpu_map);
-
-		sd = __build_numa_sched_domains(&d, cpu_map, attr, i);
-		sd = __build_cpu_sched_domain(&d, cpu_map, attr, sd, i);
-		sd = __build_book_sched_domain(&d, cpu_map, attr, sd, i);
-		sd = __build_mc_sched_domain(&d, cpu_map, attr, sd, i);
-		sd = __build_smt_sched_domain(&d, cpu_map, attr, sd, i);
-	}
 
+	/* Set up domains for cpus specified by the cpu_map. */
 	for_each_cpu(i, cpu_map) {
-		build_sched_groups(&d, SD_LV_SIBLING, cpu_map, i);
-		build_sched_groups(&d, SD_LV_BOOK, cpu_map, i);
-		build_sched_groups(&d, SD_LV_MC, cpu_map, i);
-	}
+		struct sched_domain_topology_level *tl;
 
-	/* Set up physical groups */
-	for (i = 0; i < nr_node_ids; i++)
-		build_sched_groups(&d, SD_LV_CPU, cpu_map, i);
+		sd = NULL;
+		for (tl = sched_domain_topology; tl->init; tl++)
+			sd = build_sched_domain(tl, &d, cpu_map, attr, sd, i);
 
-#ifdef CONFIG_NUMA
-	/* Set up node groups */
-	if (d.sd_allnodes)
-		build_sched_groups(&d, SD_LV_ALLNODES, cpu_map, 0);
+		while (sd->child)
+			sd = sd->child;
 
-	for (i = 0; i < nr_node_ids; i++)
-		if (build_numa_sched_groups(&d, cpu_map, i))
-			goto error;
-#endif
-
-	/* Calculate CPU power for physical packages and nodes */
-#ifdef CONFIG_SCHED_SMT
-	for_each_cpu(i, cpu_map) {
-		sd = &per_cpu(cpu_domains, i).sd;
-		init_sched_groups_power(i, sd);
-	}
-#endif
-#ifdef CONFIG_SCHED_MC
-	for_each_cpu(i, cpu_map) {
-		sd = &per_cpu(core_domains, i).sd;
-		init_sched_groups_power(i, sd);
+		*per_cpu_ptr(d.sd, i) = sd;
 	}
-#endif
-#ifdef CONFIG_SCHED_BOOK
-	for_each_cpu(i, cpu_map) {
-		sd = &per_cpu(book_domains, i).sd;
-		init_sched_groups_power(i, sd);
-	}
-#endif
 
+	/* Build the groups for the domains */
 	for_each_cpu(i, cpu_map) {
-		sd = &per_cpu(phys_domains, i).sd;
-		init_sched_groups_power(i, sd);
-	}
+		for (sd = *per_cpu_ptr(d.sd, i); sd; sd = sd->parent) {
+			sd->span_weight = cpumask_weight(sched_domain_span(sd));
+			get_group(i, sd->private, &sd->groups);
+			atomic_inc(&sd->groups->ref);
 
-#ifdef CONFIG_NUMA
-	for (i = 0; i < nr_node_ids; i++)
-		init_numa_sched_groups_power(d.sched_group_nodes[i]);
+			if (i != cpumask_first(sched_domain_span(sd)))
+				continue;
 
-	if (d.sd_allnodes) {
-		struct sched_group *sg;
+			build_sched_groups(sd);
+		}
+	}
 
-		cpu_to_allnodes_group(cpumask_first(cpu_map), cpu_map, &sg,
-								d.tmpmask);
-		init_numa_sched_groups_power(sg);
+	/* Calculate CPU power for physical packages and nodes */
+	for (i = nr_cpumask_bits-1; i >= 0; i--) {
+		if (!cpumask_test_cpu(i, cpu_map))
+			continue;
+
+		for (sd = *per_cpu_ptr(d.sd, i); sd; sd = sd->parent) {
+			claim_allocations(i, sd);
+			init_sched_groups_power(i, sd);
+		}
 	}
-#endif
 
 	/* Attach the domains */
+	rcu_read_lock();
 	for_each_cpu(i, cpu_map) {
-#ifdef CONFIG_SCHED_SMT
-		sd = &per_cpu(cpu_domains, i).sd;
-#elif defined(CONFIG_SCHED_MC)
-		sd = &per_cpu(core_domains, i).sd;
-#elif defined(CONFIG_SCHED_BOOK)
-		sd = &per_cpu(book_domains, i).sd;
-#else
-		sd = &per_cpu(phys_domains, i).sd;
-#endif
+		sd = *per_cpu_ptr(d.sd, i);
 		cpu_attach_domain(sd, d.rd, i);
 	}
+	rcu_read_unlock();
 
-	d.sched_group_nodes = NULL; /* don't free this we still need it */
-	__free_domain_allocs(&d, sa_tmpmask, cpu_map);
-	return 0;
-
+	ret = 0;
 error:
 	__free_domain_allocs(&d, alloc_state, cpu_map);
-	return -ENOMEM;
-}
-
-static int build_sched_domains(const struct cpumask *cpu_map)
-{
-	return __build_sched_domains(cpu_map, NULL);
+	return ret;
 }
 
 static cpumask_var_t *doms_cur;	/* current sched domains */
@@ -7656,7 +7362,7 @@ void free_sched_domains(cpumask_var_t doms[], unsigned int ndoms)
  * For now this just excludes isolated cpus, but could be used to
  * exclude other special cases in the future.
  */
-static int arch_init_sched_domains(const struct cpumask *cpu_map)
+static int init_sched_domains(const struct cpumask *cpu_map)
 {
 	int err;
 
@@ -7667,32 +7373,24 @@ static int arch_init_sched_domains(const struct cpumask *cpu_map)
 		doms_cur = &fallback_doms;
 	cpumask_andnot(doms_cur[0], cpu_map, cpu_isolated_map);
 	dattr_cur = NULL;
-	err = build_sched_domains(doms_cur[0]);
+	err = build_sched_domains(doms_cur[0], NULL);
 	register_sched_domain_sysctl();
 
 	return err;
 }
 
-static void arch_destroy_sched_domains(const struct cpumask *cpu_map,
-				       struct cpumask *tmpmask)
-{
-	free_sched_groups(cpu_map, tmpmask);
-}
-
 /*
  * Detach sched domains from a group of cpus specified in cpu_map
  * These cpus will now be attached to the NULL domain
  */
 static void detach_destroy_domains(const struct cpumask *cpu_map)
 {
-	/* Save because hotplug lock held. */
-	static DECLARE_BITMAP(tmpmask, CONFIG_NR_CPUS);
 	int i;
 
+	rcu_read_lock();
 	for_each_cpu(i, cpu_map)
 		cpu_attach_domain(NULL, &def_root_domain, i);
-	synchronize_sched();
-	arch_destroy_sched_domains(cpu_map, to_cpumask(tmpmask));
+	rcu_read_unlock();
 }
 
 /* handle null as "default" */
@@ -7781,8 +7479,7 @@ match1:
 				goto match2;
 		}
 		/* no match - add a new doms_new */
-		__build_sched_domains(doms_new[i],
-					dattr_new ? dattr_new + i : NULL);
+		build_sched_domains(doms_new[i], dattr_new ? dattr_new + i : NULL);
 match2:
 		;
 	}
@@ -7801,7 +7498,7 @@ match2:
 }
 
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
-static void arch_reinit_sched_domains(void)
+static void reinit_sched_domains(void)
 {
 	get_online_cpus();
 
@@ -7834,7 +7531,7 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
 	else
 		sched_mc_power_savings = level;
 
-	arch_reinit_sched_domains();
+	reinit_sched_domains();
 
 	return count;
 }
@@ -7953,14 +7650,9 @@ void __init sched_init_smp(void)
 	alloc_cpumask_var(&non_isolated_cpus, GFP_KERNEL);
 	alloc_cpumask_var(&fallback_doms, GFP_KERNEL);
 
-#if defined(CONFIG_NUMA)
-	sched_group_nodes_bycpu = kzalloc(nr_cpu_ids * sizeof(void **),
-								GFP_KERNEL);
-	BUG_ON(sched_group_nodes_bycpu == NULL);
-#endif
 	get_online_cpus();
 	mutex_lock(&sched_domains_mutex);
-	arch_init_sched_domains(cpu_active_mask);
+	init_sched_domains(cpu_active_mask);
 	cpumask_andnot(non_isolated_cpus, cpu_possible_mask, cpu_isolated_map);
 	if (cpumask_empty(non_isolated_cpus))
 		cpumask_set_cpu(smp_processor_id(), non_isolated_cpus);
@@ -8267,6 +7959,7 @@ void __init sched_init(void)
 	/* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */
 	zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
 #ifdef CONFIG_SMP
+	zalloc_cpumask_var(&sched_domains_tmpmask, GFP_NOWAIT);
 #ifdef CONFIG_NO_HZ
 	zalloc_cpumask_var(&nohz.idle_cpus_mask, GFP_NOWAIT);
 	alloc_cpumask_var(&nohz.grp_idle_mask, GFP_NOWAIT);
@@ -8326,7 +8019,7 @@ static void normalize_task(struct rq *rq, struct task_struct *p)
 	int old_prio = p->prio;
 	int on_rq;
 
-	on_rq = p->se.on_rq;
+	on_rq = p->on_rq;
 	if (on_rq)
 		deactivate_task(rq, p, 0);
 	__setscheduler(rq, p, SCHED_NORMAL, 0);
@@ -8539,7 +8232,6 @@ int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent)
 {
 	struct rt_rq *rt_rq;
 	struct sched_rt_entity *rt_se;
-	struct rq *rq;
 	int i;
 
 	tg->rt_rq = kzalloc(sizeof(rt_rq) * nr_cpu_ids, GFP_KERNEL);
@@ -8553,8 +8245,6 @@ int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent)
 			ktime_to_ns(def_rt_bandwidth.rt_period), 0);
 
 	for_each_possible_cpu(i) {
-		rq = cpu_rq(i);
-
 		rt_rq = kzalloc_node(sizeof(struct rt_rq),
 				     GFP_KERNEL, cpu_to_node(i));
 		if (!rt_rq)
@@ -8669,7 +8359,7 @@ void sched_move_task(struct task_struct *tsk)
 	rq = task_rq_lock(tsk, &flags);
 
 	running = task_current(rq, tsk);
-	on_rq = tsk->se.on_rq;
+	on_rq = tsk->on_rq;
 
 	if (on_rq)
 		dequeue_task(rq, tsk, 0);
@@ -8688,7 +8378,7 @@ void sched_move_task(struct task_struct *tsk)
 	if (on_rq)
 		enqueue_task(rq, tsk, 0);
 
-	task_rq_unlock(rq, &flags);
+	task_rq_unlock(rq, tsk, &flags);
 }
 #endif /* CONFIG_CGROUP_SCHED */
 
diff --git a/kernel/sched_autogroup.c b/kernel/sched_autogroup.c
index 5946ac51560..429242f3c48 100644
--- a/kernel/sched_autogroup.c
+++ b/kernel/sched_autogroup.c
@@ -179,7 +179,7 @@ void sched_autogroup_create_attach(struct task_struct *p)
 	struct autogroup *ag = autogroup_create();
 
 	autogroup_move_group(p, ag);
-	/* drop extra refrence added by autogroup_create() */
+	/* drop extra reference added by autogroup_create() */
 	autogroup_kref_put(ag);
 }
 EXPORT_SYMBOL(sched_autogroup_create_attach);
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 7bacd83a415..a6710a112b4 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -152,7 +152,7 @@ static void print_rq(struct seq_file *m, struct rq *rq, int rq_cpu)
 	read_lock_irqsave(&tasklist_lock, flags);
 
 	do_each_thread(g, p) {
-		if (!p->se.on_rq || task_cpu(p) != rq_cpu)
+		if (!p->on_rq || task_cpu(p) != rq_cpu)
 			continue;
 
 		print_task(m, rq, p);
@@ -296,9 +296,6 @@ static void print_cpu(struct seq_file *m, int cpu)
 	P(ttwu_count);
 	P(ttwu_local);
 
-	SEQ_printf(m, "  .%-30s: %d\n", "bkl_count",
-				rq->rq_sched_info.bkl_count);
-
 #undef P
 #undef P64
 #endif
@@ -441,7 +438,6 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
 	P(se.statistics.wait_count);
 	PN(se.statistics.iowait_sum);
 	P(se.statistics.iowait_count);
-	P(sched_info.bkl_count);
 	P(se.nr_migrations);
 	P(se.statistics.nr_migrations_cold);
 	P(se.statistics.nr_failed_migrations_affine);
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 3f7ec9e27ee..37f22626225 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -22,6 +22,7 @@
 
 #include <linux/latencytop.h>
 #include <linux/sched.h>
+#include <linux/cpumask.h>
 
 /*
  * Targeted preemption latency for CPU-bound tasks:
@@ -357,6 +358,10 @@ static void update_min_vruntime(struct cfs_rq *cfs_rq)
 	}
 
 	cfs_rq->min_vruntime = max_vruntime(cfs_rq->min_vruntime, vruntime);
+#ifndef CONFIG_64BIT
+	smp_wmb();
+	cfs_rq->min_vruntime_copy = cfs_rq->min_vruntime;
+#endif
 }
 
 /*
@@ -1339,6 +1344,8 @@ enqueue_task_fair(struct rq *rq, struct task_struct *p, int flags)
 	hrtick_update(rq);
 }
 
+static void set_next_buddy(struct sched_entity *se);
+
 /*
  * The dequeue_task method is called before nr_running is
  * decreased. We remove the task from the rbtree and
@@ -1348,14 +1355,22 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int flags)
 {
 	struct cfs_rq *cfs_rq;
 	struct sched_entity *se = &p->se;
+	int task_sleep = flags & DEQUEUE_SLEEP;
 
 	for_each_sched_entity(se) {
 		cfs_rq = cfs_rq_of(se);
 		dequeue_entity(cfs_rq, se, flags);
 
 		/* Don't dequeue parent if it has other entities besides us */
-		if (cfs_rq->load.weight)
+		if (cfs_rq->load.weight) {
+			/*
+			 * Bias pick_next to pick a task from this cfs_rq, as
+			 * p is sleeping when it is within its sched_slice.
+			 */
+			if (task_sleep && parent_entity(se))
+				set_next_buddy(parent_entity(se));
 			break;
+		}
 		flags |= DEQUEUE_SLEEP;
 	}
 
@@ -1371,12 +1386,25 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int flags)
 
 #ifdef CONFIG_SMP
 
-static void task_waking_fair(struct rq *rq, struct task_struct *p)
+static void task_waking_fair(struct task_struct *p)
 {
 	struct sched_entity *se = &p->se;
 	struct cfs_rq *cfs_rq = cfs_rq_of(se);
+	u64 min_vruntime;
 
-	se->vruntime -= cfs_rq->min_vruntime;
+#ifndef CONFIG_64BIT
+	u64 min_vruntime_copy;
+
+	do {
+		min_vruntime_copy = cfs_rq->min_vruntime_copy;
+		smp_rmb();
+		min_vruntime = cfs_rq->min_vruntime;
+	} while (min_vruntime != min_vruntime_copy);
+#else
+	min_vruntime = cfs_rq->min_vruntime;
+#endif
+
+	se->vruntime -= min_vruntime;
 }
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
@@ -1621,6 +1649,7 @@ static int select_idle_sibling(struct task_struct *p, int target)
 	/*
 	 * Otherwise, iterate the domains and find an elegible idle cpu.
 	 */
+	rcu_read_lock();
 	for_each_domain(target, sd) {
 		if (!(sd->flags & SD_SHARE_PKG_RESOURCES))
 			break;
@@ -1640,6 +1669,7 @@ static int select_idle_sibling(struct task_struct *p, int target)
 		    cpumask_test_cpu(prev_cpu, sched_domain_span(sd)))
 			break;
 	}
+	rcu_read_unlock();
 
 	return target;
 }
@@ -1656,7 +1686,7 @@ static int select_idle_sibling(struct task_struct *p, int target)
  * preempt must be disabled.
  */
 static int
-select_task_rq_fair(struct rq *rq, struct task_struct *p, int sd_flag, int wake_flags)
+select_task_rq_fair(struct task_struct *p, int sd_flag, int wake_flags)
 {
 	struct sched_domain *tmp, *affine_sd = NULL, *sd = NULL;
 	int cpu = smp_processor_id();
@@ -1672,6 +1702,7 @@ select_task_rq_fair(struct rq *rq, struct task_struct *p, int sd_flag, int wake_
 		new_cpu = prev_cpu;
 	}
 
+	rcu_read_lock();
 	for_each_domain(cpu, tmp) {
 		if (!(tmp->flags & SD_LOAD_BALANCE))
 			continue;
@@ -1722,9 +1753,10 @@ select_task_rq_fair(struct rq *rq, struct task_struct *p, int sd_flag, int wake_
 
 	if (affine_sd) {
 		if (cpu == prev_cpu || wake_affine(affine_sd, p, sync))
-			return select_idle_sibling(p, cpu);
-		else
-			return select_idle_sibling(p, prev_cpu);
+			prev_cpu = cpu;
+
+		new_cpu = select_idle_sibling(p, prev_cpu);
+		goto unlock;
 	}
 
 	while (sd) {
@@ -1765,6 +1797,8 @@ select_task_rq_fair(struct rq *rq, struct task_struct *p, int sd_flag, int wake_
 		}
 		/* while loop will break here if sd == NULL */
 	}
+unlock:
+	rcu_read_unlock();
 
 	return new_cpu;
 }
@@ -1788,10 +1822,7 @@ wakeup_gran(struct sched_entity *curr, struct sched_entity *se)
 	 * This is especially important for buddies when the leftmost
 	 * task is higher priority than the buddy.
 	 */
-	if (unlikely(se->load.weight != NICE_0_LOAD))
-		gran = calc_delta_fair(gran, se);
-
-	return gran;
+	return calc_delta_fair(gran, se);
 }
 
 /*
@@ -1825,26 +1856,26 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se)
 
 static void set_last_buddy(struct sched_entity *se)
 {
-	if (likely(task_of(se)->policy != SCHED_IDLE)) {
-		for_each_sched_entity(se)
-			cfs_rq_of(se)->last = se;
-	}
+	if (entity_is_task(se) && unlikely(task_of(se)->policy == SCHED_IDLE))
+		return;
+
+	for_each_sched_entity(se)
+		cfs_rq_of(se)->last = se;
 }
 
 static void set_next_buddy(struct sched_entity *se)
 {
-	if (likely(task_of(se)->policy != SCHED_IDLE)) {
-		for_each_sched_entity(se)
-			cfs_rq_of(se)->next = se;
-	}
+	if (entity_is_task(se) && unlikely(task_of(se)->policy == SCHED_IDLE))
+		return;
+
+	for_each_sched_entity(se)
+		cfs_rq_of(se)->next = se;
 }
 
 static void set_skip_buddy(struct sched_entity *se)
 {
-	if (likely(task_of(se)->policy != SCHED_IDLE)) {
-		for_each_sched_entity(se)
-			cfs_rq_of(se)->skip = se;
-	}
+	for_each_sched_entity(se)
+		cfs_rq_of(se)->skip = se;
 }
 
 /*
@@ -1856,12 +1887,15 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_
 	struct sched_entity *se = &curr->se, *pse = &p->se;
 	struct cfs_rq *cfs_rq = task_cfs_rq(curr);
 	int scale = cfs_rq->nr_running >= sched_nr_latency;
+	int next_buddy_marked = 0;
 
 	if (unlikely(se == pse))
 		return;
 
-	if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK))
+	if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK)) {
 		set_next_buddy(pse);
+		next_buddy_marked = 1;
+	}
 
 	/*
 	 * We can come here with TIF_NEED_RESCHED already set from new task
@@ -1889,8 +1923,15 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_
 	update_curr(cfs_rq);
 	find_matching_se(&se, &pse);
 	BUG_ON(!pse);
-	if (wakeup_preempt_entity(se, pse) == 1)
+	if (wakeup_preempt_entity(se, pse) == 1) {
+		/*
+		 * Bias pick_next to pick the sched entity that is
+		 * triggering this preemption.
+		 */
+		if (!next_buddy_marked)
+			set_next_buddy(pse);
 		goto preempt;
+	}
 
 	return;
 
@@ -2101,23 +2142,22 @@ static unsigned long
 balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
 	      unsigned long max_load_move, struct sched_domain *sd,
 	      enum cpu_idle_type idle, int *all_pinned,
-	      int *this_best_prio, struct cfs_rq *busiest_cfs_rq)
+	      struct cfs_rq *busiest_cfs_rq)
 {
-	int loops = 0, pulled = 0, pinned = 0;
+	int loops = 0, pulled = 0;
 	long rem_load_move = max_load_move;
 	struct task_struct *p, *n;
 
 	if (max_load_move == 0)
 		goto out;
 
-	pinned = 1;
-
 	list_for_each_entry_safe(p, n, &busiest_cfs_rq->tasks, se.group_node) {
 		if (loops++ > sysctl_sched_nr_migrate)
 			break;
 
 		if ((p->se.load.weight >> 1) > rem_load_move ||
-		    !can_migrate_task(p, busiest, this_cpu, sd, idle, &pinned))
+		    !can_migrate_task(p, busiest, this_cpu, sd, idle,
+				      all_pinned))
 			continue;
 
 		pull_task(busiest, p, this_rq, this_cpu);
@@ -2140,9 +2180,6 @@ balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
 		 */
 		if (rem_load_move <= 0)
 			break;
-
-		if (p->prio < *this_best_prio)
-			*this_best_prio = p->prio;
 	}
 out:
 	/*
@@ -2152,9 +2189,6 @@ out:
 	 */
 	schedstat_add(sd, lb_gained[idle], pulled);
 
-	if (all_pinned)
-		*all_pinned = pinned;
-
 	return max_load_move - rem_load_move;
 }
 
@@ -2205,7 +2239,7 @@ static unsigned long
 load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
 		  unsigned long max_load_move,
 		  struct sched_domain *sd, enum cpu_idle_type idle,
-		  int *all_pinned, int *this_best_prio)
+		  int *all_pinned)
 {
 	long rem_load_move = max_load_move;
 	int busiest_cpu = cpu_of(busiest);
@@ -2230,7 +2264,7 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
 		rem_load = div_u64(rem_load, busiest_h_load + 1);
 
 		moved_load = balance_tasks(this_rq, this_cpu, busiest,
-				rem_load, sd, idle, all_pinned, this_best_prio,
+				rem_load, sd, idle, all_pinned,
 				busiest_cfs_rq);
 
 		if (!moved_load)
@@ -2256,11 +2290,11 @@ static unsigned long
 load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
 		  unsigned long max_load_move,
 		  struct sched_domain *sd, enum cpu_idle_type idle,
-		  int *all_pinned, int *this_best_prio)
+		  int *all_pinned)
 {
 	return balance_tasks(this_rq, this_cpu, busiest,
 			max_load_move, sd, idle, all_pinned,
-			this_best_prio, &busiest->cfs);
+			&busiest->cfs);
 }
 #endif
 
@@ -2277,12 +2311,11 @@ static int move_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
 		      int *all_pinned)
 {
 	unsigned long total_load_moved = 0, load_moved;
-	int this_best_prio = this_rq->curr->prio;
 
 	do {
 		load_moved = load_balance_fair(this_rq, this_cpu, busiest,
 				max_load_move - total_load_moved,
-				sd, idle, all_pinned, &this_best_prio);
+				sd, idle, all_pinned);
 
 		total_load_moved += load_moved;
 
@@ -2651,7 +2684,7 @@ fix_small_capacity(struct sched_domain *sd, struct sched_group *group)
 	/*
 	 * Only siblings can have significantly less than SCHED_LOAD_SCALE
 	 */
-	if (sd->level != SD_LV_SIBLING)
+	if (!(sd->flags & SD_SHARE_CPUPOWER))
 		return 0;
 
 	/*
@@ -3061,7 +3094,7 @@ static inline void calculate_imbalance(struct sd_lb_stats *sds, int this_cpu,
 
 	/*
 	 * if *imbalance is less than the average load per runnable task
-	 * there is no gaurantee that any tasks will be moved so we'll have
+	 * there is no guarantee that any tasks will be moved so we'll have
 	 * a think about bumping its value to force at least one task to be
 	 * moved
 	 */
@@ -3126,6 +3159,8 @@ find_busiest_group(struct sched_domain *sd, int this_cpu,
 	if (!sds.busiest || sds.busiest_nr_running == 0)
 		goto out_balanced;
 
+	sds.avg_load = (SCHED_LOAD_SCALE * sds.total_load) / sds.total_pwr;
+
 	/*
 	 * If the busiest group is imbalanced the below checks don't
 	 * work because they assumes all things are equal, which typically
@@ -3150,7 +3185,6 @@ find_busiest_group(struct sched_domain *sd, int this_cpu,
 	 * Don't pull any tasks if this group is already above the domain
 	 * average load.
 	 */
-	sds.avg_load = (SCHED_LOAD_SCALE * sds.total_load) / sds.total_pwr;
 	if (sds.this_load >= sds.avg_load)
 		goto out_balanced;
 
@@ -3339,6 +3373,7 @@ redo:
 		 * still unbalanced. ld_moved simply stays zero, so it is
 		 * correctly treated as an imbalance.
 		 */
+		all_pinned = 1;
 		local_irq_save(flags);
 		double_rq_lock(this_rq, busiest);
 		ld_moved = move_tasks(this_rq, this_cpu, busiest,
@@ -3466,6 +3501,7 @@ static void idle_balance(int this_cpu, struct rq *this_rq)
 	raw_spin_unlock(&this_rq->lock);
 
 	update_shares(this_cpu);
+	rcu_read_lock();
 	for_each_domain(this_cpu, sd) {
 		unsigned long interval;
 		int balance = 1;
@@ -3487,6 +3523,7 @@ static void idle_balance(int this_cpu, struct rq *this_rq)
 			break;
 		}
 	}
+	rcu_read_unlock();
 
 	raw_spin_lock(&this_rq->lock);
 
@@ -3535,6 +3572,7 @@ static int active_load_balance_cpu_stop(void *data)
 	double_lock_balance(busiest_rq, target_rq);
 
 	/* Search for an sd spanning us and the target CPU. */
+	rcu_read_lock();
 	for_each_domain(target_cpu, sd) {
 		if ((sd->flags & SD_LOAD_BALANCE) &&
 		    cpumask_test_cpu(busiest_cpu, sched_domain_span(sd)))
@@ -3550,6 +3588,7 @@ static int active_load_balance_cpu_stop(void *data)
 		else
 			schedstat_inc(sd, alb_failed);
 	}
+	rcu_read_unlock();
 	double_unlock_balance(busiest_rq, target_rq);
 out_unlock:
 	busiest_rq->active_balance = 0;
@@ -3676,6 +3715,7 @@ static int find_new_ilb(int cpu)
 {
 	struct sched_domain *sd;
 	struct sched_group *ilb_group;
+	int ilb = nr_cpu_ids;
 
 	/*
 	 * Have idle load balancer selection from semi-idle packages only
@@ -3691,20 +3731,25 @@ static int find_new_ilb(int cpu)
 	if (cpumask_weight(nohz.idle_cpus_mask) < 2)
 		goto out_done;
 
+	rcu_read_lock();
 	for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) {
 		ilb_group = sd->groups;
 
 		do {
-			if (is_semi_idle_group(ilb_group))
-				return cpumask_first(nohz.grp_idle_mask);
+			if (is_semi_idle_group(ilb_group)) {
+				ilb = cpumask_first(nohz.grp_idle_mask);
+				goto unlock;
+			}
 
 			ilb_group = ilb_group->next;
 
 		} while (ilb_group != sd->groups);
 	}
+unlock:
+	rcu_read_unlock();
 
 out_done:
-	return nr_cpu_ids;
+	return ilb;
 }
 #else /*  (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */
 static inline int find_new_ilb(int call_cpu)
@@ -3819,6 +3864,17 @@ void select_nohz_load_balancer(int stop_tick)
 
 static DEFINE_SPINLOCK(balancing);
 
+static unsigned long __read_mostly max_load_balance_interval = HZ/10;
+
+/*
+ * Scale the max load_balance interval with the number of CPUs in the system.
+ * This trades load-balance latency on larger machines for less cross talk.
+ */
+static void update_max_interval(void)
+{
+	max_load_balance_interval = HZ*num_online_cpus()/10;
+}
+
 /*
  * It checks each scheduling domain to see if it is due to be balanced,
  * and initiates a balancing operation if so.
@@ -3838,6 +3894,7 @@ static void rebalance_domains(int cpu, enum cpu_idle_type idle)
 
 	update_shares(cpu);
 
+	rcu_read_lock();
 	for_each_domain(cpu, sd) {
 		if (!(sd->flags & SD_LOAD_BALANCE))
 			continue;
@@ -3848,10 +3905,7 @@ static void rebalance_domains(int cpu, enum cpu_idle_type idle)
 
 		/* scale ms to jiffies */
 		interval = msecs_to_jiffies(interval);
-		if (unlikely(!interval))
-			interval = 1;
-		if (interval > HZ*NR_CPUS/10)
-			interval = HZ*NR_CPUS/10;
+		interval = clamp(interval, 1UL, max_load_balance_interval);
 
 		need_serialize = sd->flags & SD_SERIALIZE;
 
@@ -3886,6 +3940,7 @@ out:
 		if (!balance)
 			break;
 	}
+	rcu_read_unlock();
 
 	/*
 	 * next_balance will be updated only when there is a need.
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index 68e69acc29b..be40f7371ee 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -64,3 +64,9 @@ SCHED_FEAT(OWNER_SPIN, 1)
  * Decrement CPU power based on irq activity
  */
 SCHED_FEAT(NONIRQ_POWER, 1)
+
+/*
+ * Queue remote wakeups on the target CPU and process them
+ * using the scheduler IPI. Reduces rq->lock contention/bounces.
+ */
+SCHED_FEAT(TTWU_QUEUE, 1)
diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c
index a776a639642..0a51882534e 100644
--- a/kernel/sched_idletask.c
+++ b/kernel/sched_idletask.c
@@ -7,7 +7,7 @@
 
 #ifdef CONFIG_SMP
 static int
-select_task_rq_idle(struct rq *rq, struct task_struct *p, int sd_flag, int flags)
+select_task_rq_idle(struct task_struct *p, int sd_flag, int flags)
 {
 	return task_cpu(p); /* IDLE tasks as never migrated */
 }
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index db308cb08b7..64b2a37c07d 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -183,6 +183,14 @@ static inline u64 sched_rt_period(struct rt_rq *rt_rq)
 	return ktime_to_ns(rt_rq->tg->rt_bandwidth.rt_period);
 }
 
+typedef struct task_group *rt_rq_iter_t;
+
+#define for_each_rt_rq(rt_rq, iter, rq) \
+	for (iter = list_entry_rcu(task_groups.next, typeof(*iter), list); \
+	     (&iter->list != &task_groups) && \
+	     (rt_rq = iter->rt_rq[cpu_of(rq)]); \
+	     iter = list_entry_rcu(iter->list.next, typeof(*iter), list))
+
 static inline void list_add_leaf_rt_rq(struct rt_rq *rt_rq)
 {
 	list_add_rcu(&rt_rq->leaf_rt_rq_list,
@@ -288,6 +296,11 @@ static inline u64 sched_rt_period(struct rt_rq *rt_rq)
 	return ktime_to_ns(def_rt_bandwidth.rt_period);
 }
 
+typedef struct rt_rq *rt_rq_iter_t;
+
+#define for_each_rt_rq(rt_rq, iter, rq) \
+	for ((void) iter, rt_rq = &rq->rt; rt_rq; rt_rq = NULL)
+
 static inline void list_add_leaf_rt_rq(struct rt_rq *rt_rq)
 {
 }
@@ -402,12 +415,13 @@ next:
 static void __disable_runtime(struct rq *rq)
 {
 	struct root_domain *rd = rq->rd;
+	rt_rq_iter_t iter;
 	struct rt_rq *rt_rq;
 
 	if (unlikely(!scheduler_running))
 		return;
 
-	for_each_leaf_rt_rq(rt_rq, rq) {
+	for_each_rt_rq(rt_rq, iter, rq) {
 		struct rt_bandwidth *rt_b = sched_rt_bandwidth(rt_rq);
 		s64 want;
 		int i;
@@ -487,6 +501,7 @@ static void disable_runtime(struct rq *rq)
 
 static void __enable_runtime(struct rq *rq)
 {
+	rt_rq_iter_t iter;
 	struct rt_rq *rt_rq;
 
 	if (unlikely(!scheduler_running))
@@ -495,7 +510,7 @@ static void __enable_runtime(struct rq *rq)
 	/*
 	 * Reset each runqueue's bandwidth settings
 	 */
-	for_each_leaf_rt_rq(rt_rq, rq) {
+	for_each_rt_rq(rt_rq, iter, rq) {
 		struct rt_bandwidth *rt_b = sched_rt_bandwidth(rt_rq);
 
 		raw_spin_lock(&rt_b->rt_runtime_lock);
@@ -562,6 +577,13 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)
 			if (rt_rq->rt_throttled && rt_rq->rt_time < runtime) {
 				rt_rq->rt_throttled = 0;
 				enqueue = 1;
+
+				/*
+				 * Force a clock update if the CPU was idle,
+				 * lest wakeup -> unthrottle time accumulate.
+				 */
+				if (rt_rq->rt_nr_running && rq->curr == rq->idle)
+					rq->skip_clock_update = -1;
 			}
 			if (rt_rq->rt_time || rt_rq->rt_nr_running)
 				idle = 0;
@@ -977,13 +999,23 @@ static void yield_task_rt(struct rq *rq)
 static int find_lowest_rq(struct task_struct *task);
 
 static int
-select_task_rq_rt(struct rq *rq, struct task_struct *p, int sd_flag, int flags)
+select_task_rq_rt(struct task_struct *p, int sd_flag, int flags)
 {
+	struct task_struct *curr;
+	struct rq *rq;
+	int cpu;
+
 	if (sd_flag != SD_BALANCE_WAKE)
 		return smp_processor_id();
 
+	cpu = task_cpu(p);
+	rq = cpu_rq(cpu);
+
+	rcu_read_lock();
+	curr = ACCESS_ONCE(rq->curr); /* unlocked access */
+
 	/*
-	 * If the current task is an RT task, then
+	 * If the current task on @p's runqueue is an RT task, then
 	 * try to see if we can wake this RT task up on another
 	 * runqueue. Otherwise simply start this RT task
 	 * on its current runqueue.
@@ -997,21 +1029,25 @@ select_task_rq_rt(struct rq *rq, struct task_struct *p, int sd_flag, int flags)
 	 * lock?
 	 *
 	 * For equal prio tasks, we just let the scheduler sort it out.
+	 *
+	 * Otherwise, just let it ride on the affined RQ and the
+	 * post-schedule router will push the preempted task away
+	 *
+	 * This test is optimistic, if we get it wrong the load-balancer
+	 * will have to sort it out.
 	 */
-	if (unlikely(rt_task(rq->curr)) &&
-	    (rq->curr->rt.nr_cpus_allowed < 2 ||
-	     rq->curr->prio < p->prio) &&
+	if (curr && unlikely(rt_task(curr)) &&
+	    (curr->rt.nr_cpus_allowed < 2 ||
+	     curr->prio < p->prio) &&
 	    (p->rt.nr_cpus_allowed > 1)) {
-		int cpu = find_lowest_rq(p);
+		int target = find_lowest_rq(p);
 
-		return (cpu == -1) ? task_cpu(p) : cpu;
+		if (target != -1)
+			cpu = target;
 	}
+	rcu_read_unlock();
 
-	/*
-	 * Otherwise, just let it ride on the affined RQ and the
-	 * post-schedule router will push the preempted task away
-	 */
-	return task_cpu(p);
+	return cpu;
 }
 
 static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p)
@@ -1136,7 +1172,7 @@ static void put_prev_task_rt(struct rq *rq, struct task_struct *p)
 	 * The previous task needs to be made eligible for pushing
 	 * if it is still active
 	 */
-	if (p->se.on_rq && p->rt.nr_cpus_allowed > 1)
+	if (on_rt_rq(&p->rt) && p->rt.nr_cpus_allowed > 1)
 		enqueue_pushable_task(rq, p);
 }
 
@@ -1287,7 +1323,7 @@ static struct rq *find_lock_lowest_rq(struct task_struct *task, struct rq *rq)
 				     !cpumask_test_cpu(lowest_rq->cpu,
 						       &task->cpus_allowed) ||
 				     task_running(rq, task) ||
-				     !task->se.on_rq)) {
+				     !task->on_rq)) {
 
 				raw_spin_unlock(&lowest_rq->lock);
 				lowest_rq = NULL;
@@ -1321,7 +1357,7 @@ static struct task_struct *pick_next_pushable_task(struct rq *rq)
 	BUG_ON(task_current(rq, p));
 	BUG_ON(p->rt.nr_cpus_allowed <= 1);
 
-	BUG_ON(!p->se.on_rq);
+	BUG_ON(!p->on_rq);
 	BUG_ON(!rt_task(p));
 
 	return p;
@@ -1378,7 +1414,7 @@ retry:
 		task = pick_next_pushable_task(rq);
 		if (task_cpu(next_task) == rq->cpu && task == next_task) {
 			/*
-			 * If we get here, the task hasnt moved at all, but
+			 * If we get here, the task hasn't moved at all, but
 			 * it has failed to push.  We will not try again,
 			 * since the other cpus will pull from us when they
 			 * are ready.
@@ -1467,7 +1503,7 @@ static int pull_rt_task(struct rq *this_rq)
 		 */
 		if (p && (p->prio < this_rq->rt.highest_prio.curr)) {
 			WARN_ON(p == src_rq->curr);
-			WARN_ON(!p->se.on_rq);
+			WARN_ON(!p->on_rq);
 
 			/*
 			 * There's a chance that p is higher in priority
@@ -1488,7 +1524,7 @@ static int pull_rt_task(struct rq *this_rq)
 			/*
 			 * We continue with the search, just in
 			 * case there's an even higher prio task
-			 * in another runqueue. (low likelyhood
+			 * in another runqueue. (low likelihood
 			 * but possible)
 			 */
 		}
@@ -1538,7 +1574,7 @@ static void set_cpus_allowed_rt(struct task_struct *p,
 	 * Update the migration status of the RQ if we have an RT task
 	 * which is running AND changing its weight value.
 	 */
-	if (p->se.on_rq && (weight != p->rt.nr_cpus_allowed)) {
+	if (p->on_rq && (weight != p->rt.nr_cpus_allowed)) {
 		struct rq *rq = task_rq(p);
 
 		if (!task_current(rq, p)) {
@@ -1608,7 +1644,7 @@ static void switched_from_rt(struct rq *rq, struct task_struct *p)
 	 * we may need to handle the pulling of RT tasks
 	 * now.
 	 */
-	if (p->se.on_rq && !rq->rt.rt_nr_running)
+	if (p->on_rq && !rq->rt.rt_nr_running)
 		pull_rt_task(rq);
 }
 
@@ -1638,7 +1674,7 @@ static void switched_to_rt(struct rq *rq, struct task_struct *p)
 	 * If that current running task is also an RT task
 	 * then see if we can move to another run queue.
 	 */
-	if (p->se.on_rq && rq->curr != p) {
+	if (p->on_rq && rq->curr != p) {
 #ifdef CONFIG_SMP
 		if (rq->rt.overloaded && push_rt_task(rq) &&
 		    /* Don't resched if we changed runqueues */
@@ -1657,7 +1693,7 @@ static void switched_to_rt(struct rq *rq, struct task_struct *p)
 static void
 prio_changed_rt(struct rq *rq, struct task_struct *p, int oldprio)
 {
-	if (!p->se.on_rq)
+	if (!p->on_rq)
 		return;
 
 	if (rq->curr == p) {
@@ -1796,10 +1832,11 @@ extern void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq);
 
 static void print_rt_stats(struct seq_file *m, int cpu)
 {
+	rt_rq_iter_t iter;
 	struct rt_rq *rt_rq;
 
 	rcu_read_lock();
-	for_each_leaf_rt_rq(rt_rq, cpu_rq(cpu))
+	for_each_rt_rq(rt_rq, iter, cpu_rq(cpu))
 		print_rt_rq(m, cpu, rt_rq);
 	rcu_read_unlock();
 }
diff --git a/kernel/sched_stoptask.c b/kernel/sched_stoptask.c
index 1ba2bd40fda..6f437632afa 100644
--- a/kernel/sched_stoptask.c
+++ b/kernel/sched_stoptask.c
@@ -9,8 +9,7 @@
 
 #ifdef CONFIG_SMP
 static int
-select_task_rq_stop(struct rq *rq, struct task_struct *p,
-		    int sd_flag, int flags)
+select_task_rq_stop(struct task_struct *p, int sd_flag, int flags)
 {
 	return task_cpu(p); /* stop tasks as never migrate */
 }
@@ -26,7 +25,7 @@ static struct task_struct *pick_next_task_stop(struct rq *rq)
 {
 	struct task_struct *stop = rq->stop;
 
-	if (stop && stop->se.on_rq)
+	if (stop && stop->on_rq)
 		return stop;
 
 	return NULL;
diff --git a/kernel/signal.c b/kernel/signal.c
index 1186cf7fac7..ad5e818baac 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -124,7 +124,7 @@ static inline int has_pending_signals(sigset_t *signal, sigset_t *blocked)
 
 static int recalc_sigpending_tsk(struct task_struct *t)
 {
-	if (t->signal->group_stop_count > 0 ||
+	if ((t->group_stop & GROUP_STOP_PENDING) ||
 	    PENDING(&t->pending, &t->blocked) ||
 	    PENDING(&t->signal->shared_pending, &t->blocked)) {
 		set_tsk_thread_flag(t, TIF_SIGPENDING);
@@ -223,10 +223,87 @@ static inline void print_dropped_signal(int sig)
 				current->comm, current->pid, sig);
 }
 
+/**
+ * task_clear_group_stop_trapping - clear group stop trapping bit
+ * @task: target task
+ *
+ * If GROUP_STOP_TRAPPING is set, a ptracer is waiting for us.  Clear it
+ * and wake up the ptracer.  Note that we don't need any further locking.
+ * @task->siglock guarantees that @task->parent points to the ptracer.
+ *
+ * CONTEXT:
+ * Must be called with @task->sighand->siglock held.
+ */
+static void task_clear_group_stop_trapping(struct task_struct *task)
+{
+	if (unlikely(task->group_stop & GROUP_STOP_TRAPPING)) {
+		task->group_stop &= ~GROUP_STOP_TRAPPING;
+		__wake_up_sync_key(&task->parent->signal->wait_chldexit,
+				   TASK_UNINTERRUPTIBLE, 1, task);
+	}
+}
+
+/**
+ * task_clear_group_stop_pending - clear pending group stop
+ * @task: target task
+ *
+ * Clear group stop states for @task.
+ *
+ * CONTEXT:
+ * Must be called with @task->sighand->siglock held.
+ */
+void task_clear_group_stop_pending(struct task_struct *task)
+{
+	task->group_stop &= ~(GROUP_STOP_PENDING | GROUP_STOP_CONSUME |
+			      GROUP_STOP_DEQUEUED);
+}
+
+/**
+ * task_participate_group_stop - participate in a group stop
+ * @task: task participating in a group stop
+ *
+ * @task has GROUP_STOP_PENDING set and is participating in a group stop.
+ * Group stop states are cleared and the group stop count is consumed if
+ * %GROUP_STOP_CONSUME was set.  If the consumption completes the group
+ * stop, the appropriate %SIGNAL_* flags are set.
+ *
+ * CONTEXT:
+ * Must be called with @task->sighand->siglock held.
+ *
+ * RETURNS:
+ * %true if group stop completion should be notified to the parent, %false
+ * otherwise.
+ */
+static bool task_participate_group_stop(struct task_struct *task)
+{
+	struct signal_struct *sig = task->signal;
+	bool consume = task->group_stop & GROUP_STOP_CONSUME;
+
+	WARN_ON_ONCE(!(task->group_stop & GROUP_STOP_PENDING));
+
+	task_clear_group_stop_pending(task);
+
+	if (!consume)
+		return false;
+
+	if (!WARN_ON_ONCE(sig->group_stop_count == 0))
+		sig->group_stop_count--;
+
+	/*
+	 * Tell the caller to notify completion iff we are entering into a
+	 * fresh group stop.  Read comment in do_signal_stop() for details.
+	 */
+	if (!sig->group_stop_count && !(sig->flags & SIGNAL_STOP_STOPPED)) {
+		sig->flags = SIGNAL_STOP_STOPPED;
+		return true;
+	}
+	return false;
+}
+
 /*
  * allocate a new signal queue record
  * - this may be called without locks if and only if t == current, otherwise an
- *   appopriate lock must be held to stop the target task from exiting
+ *   appropriate lock must be held to stop the target task from exiting
  */
 static struct sigqueue *
 __sigqueue_alloc(int sig, struct task_struct *t, gfp_t flags, int override_rlimit)
@@ -375,15 +452,15 @@ int unhandled_signal(struct task_struct *tsk, int sig)
 	return !tracehook_consider_fatal_signal(tsk, sig);
 }
 
-
-/* Notify the system that a driver wants to block all signals for this
+/*
+ * Notify the system that a driver wants to block all signals for this
  * process, and wants to be notified if any signals at all were to be
  * sent/acted upon.  If the notifier routine returns non-zero, then the
  * signal will be acted upon after all.  If the notifier routine returns 0,
  * then then signal will be blocked.  Only one block per process is
  * allowed.  priv is a pointer to private data that the notifier routine
- * can use to determine if the signal should be blocked or not.  */
-
+ * can use to determine if the signal should be blocked or not.
+ */
 void
 block_all_signals(int (*notifier)(void *priv), void *priv, sigset_t *mask)
 {
@@ -434,9 +511,10 @@ still_pending:
 		copy_siginfo(info, &first->info);
 		__sigqueue_free(first);
 	} else {
-		/* Ok, it wasn't in the queue.  This must be
-		   a fast-pathed signal or we must have been
-		   out of queue space.  So zero out the info.
+		/*
+		 * Ok, it wasn't in the queue.  This must be
+		 * a fast-pathed signal or we must have been
+		 * out of queue space.  So zero out the info.
 		 */
 		info->si_signo = sig;
 		info->si_errno = 0;
@@ -468,7 +546,7 @@ static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
 }
 
 /*
- * Dequeue a signal and return the element to the caller, which is 
+ * Dequeue a signal and return the element to the caller, which is
  * expected to free it.
  *
  * All callers have to hold the siglock.
@@ -490,7 +568,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
 		 * itimers are process shared and we restart periodic
 		 * itimers in the signal delivery path to prevent DoS
 		 * attacks in the high resolution timer case. This is
-		 * compliant with the old way of self restarting
+		 * compliant with the old way of self-restarting
 		 * itimers, as the SIGALRM is a legacy signal and only
 		 * queued once. Changing the restart behaviour to
 		 * restart the timer in the signal dequeue path is
@@ -526,7 +604,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
 		 * is to alert stop-signal processing code when another
 		 * processor has come along and cleared the flag.
 		 */
-		tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
+		current->group_stop |= GROUP_STOP_DEQUEUED;
 	}
 	if ((info->si_code & __SI_MASK) == __SI_TIMER && info->si_sys_private) {
 		/*
@@ -591,7 +669,7 @@ static int rm_from_queue_full(sigset_t *mask, struct sigpending *s)
 	if (sigisemptyset(&m))
 		return 0;
 
-	signandsets(&s->signal, &s->signal, mask);
+	sigandnsets(&s->signal, &s->signal, mask);
 	list_for_each_entry_safe(q, n, &s->list, list) {
 		if (sigismember(mask, q->info.si_signo)) {
 			list_del_init(&q->list);
@@ -726,34 +804,14 @@ static int prepare_signal(int sig, struct task_struct *p, int from_ancestor_ns)
 	} else if (sig == SIGCONT) {
 		unsigned int why;
 		/*
-		 * Remove all stop signals from all queues,
-		 * and wake all threads.
+		 * Remove all stop signals from all queues, wake all threads.
 		 */
 		rm_from_queue(SIG_KERNEL_STOP_MASK, &signal->shared_pending);
 		t = p;
 		do {
-			unsigned int state;
+			task_clear_group_stop_pending(t);
 			rm_from_queue(SIG_KERNEL_STOP_MASK, &t->pending);
-			/*
-			 * If there is a handler for SIGCONT, we must make
-			 * sure that no thread returns to user mode before
-			 * we post the signal, in case it was the only
-			 * thread eligible to run the signal handler--then
-			 * it must not do anything between resuming and
-			 * running the handler.  With the TIF_SIGPENDING
-			 * flag set, the thread will pause and acquire the
-			 * siglock that we hold now and until we've queued
-			 * the pending signal.
-			 *
-			 * Wake up the stopped thread _after_ setting
-			 * TIF_SIGPENDING
-			 */
-			state = __TASK_STOPPED;
-			if (sig_user_defined(t, SIGCONT) && !sigismember(&t->blocked, SIGCONT)) {
-				set_tsk_thread_flag(t, TIF_SIGPENDING);
-				state |= TASK_INTERRUPTIBLE;
-			}
-			wake_up_state(t, state);
+			wake_up_state(t, __TASK_STOPPED);
 		} while_each_thread(p, t);
 
 		/*
@@ -779,13 +837,6 @@ static int prepare_signal(int sig, struct task_struct *p, int from_ancestor_ns)
 			signal->flags = why | SIGNAL_STOP_CONTINUED;
 			signal->group_stop_count = 0;
 			signal->group_exit_code = 0;
-		} else {
-			/*
-			 * We are not stopped, but there could be a stop
-			 * signal in the middle of being processed after
-			 * being removed from the queue.  Clear that too.
-			 */
-			signal->flags &= ~SIGNAL_STOP_DEQUEUED;
 		}
 	}
 
@@ -874,6 +925,7 @@ static void complete_signal(int sig, struct task_struct *p, int group)
 			signal->group_stop_count = 0;
 			t = p;
 			do {
+				task_clear_group_stop_pending(t);
 				sigaddset(&t->pending.signal, SIGKILL);
 				signal_wake_up(t, 1);
 			} while_each_thread(p, t);
@@ -923,14 +975,15 @@ static int __send_signal(int sig, struct siginfo *info, struct task_struct *t,
 	if (info == SEND_SIG_FORCED)
 		goto out_set;
 
-	/* Real-time signals must be queued if sent by sigqueue, or
-	   some other real-time mechanism.  It is implementation
-	   defined whether kill() does so.  We attempt to do so, on
-	   the principle of least surprise, but since kill is not
-	   allowed to fail with EAGAIN when low on memory we just
-	   make sure at least one signal gets delivered and don't
-	   pass on the info struct.  */
-
+	/*
+	 * Real-time signals must be queued if sent by sigqueue, or
+	 * some other real-time mechanism.  It is implementation
+	 * defined whether kill() does so.  We attempt to do so, on
+	 * the principle of least surprise, but since kill is not
+	 * allowed to fail with EAGAIN when low on memory we just
+	 * make sure at least one signal gets delivered and don't
+	 * pass on the info struct.
+	 */
 	if (sig < SIGRTMIN)
 		override_rlimit = (is_si_special(info) || info->si_code >= 0);
 	else
@@ -1107,6 +1160,7 @@ int zap_other_threads(struct task_struct *p)
 	p->signal->group_stop_count = 0;
 
 	while_each_thread(p, t) {
+		task_clear_group_stop_pending(t);
 		count++;
 
 		/* Don't bother with already dead threads */
@@ -1201,8 +1255,7 @@ retry:
 	return error;
 }
 
-int
-kill_proc_info(int sig, struct siginfo *info, pid_t pid)
+int kill_proc_info(int sig, struct siginfo *info, pid_t pid)
 {
 	int error;
 	rcu_read_lock();
@@ -1299,8 +1352,7 @@ static int kill_something_info(int sig, struct siginfo *info, pid_t pid)
  * These are for backward compatibility with the rest of the kernel source.
  */
 
-int
-send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
+int send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
 {
 	/*
 	 * Make sure legacy kernel users don't send in bad values
@@ -1368,7 +1420,7 @@ EXPORT_SYMBOL(kill_pid);
  * These functions support sending signals using preallocated sigqueue
  * structures.  This is needed "because realtime applications cannot
  * afford to lose notifications of asynchronous events, like timer
- * expirations or I/O completions".  In the case of Posix Timers
+ * expirations or I/O completions".  In the case of POSIX Timers
  * we allocate the sigqueue structure from the timer_create.  If this
  * allocation fails we are able to report the failure to the application
  * with an EAGAIN error.
@@ -1536,16 +1588,30 @@ int do_notify_parent(struct task_struct *tsk, int sig)
 	return ret;
 }
 
-static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
+/**
+ * do_notify_parent_cldstop - notify parent of stopped/continued state change
+ * @tsk: task reporting the state change
+ * @for_ptracer: the notification is for ptracer
+ * @why: CLD_{CONTINUED|STOPPED|TRAPPED} to report
+ *
+ * Notify @tsk's parent that the stopped/continued state has changed.  If
+ * @for_ptracer is %false, @tsk's group leader notifies to its real parent.
+ * If %true, @tsk reports to @tsk->parent which should be the ptracer.
+ *
+ * CONTEXT:
+ * Must be called with tasklist_lock at least read locked.
+ */
+static void do_notify_parent_cldstop(struct task_struct *tsk,
+				     bool for_ptracer, int why)
 {
 	struct siginfo info;
 	unsigned long flags;
 	struct task_struct *parent;
 	struct sighand_struct *sighand;
 
-	if (task_ptrace(tsk))
+	if (for_ptracer) {
 		parent = tsk->parent;
-	else {
+	} else {
 		tsk = tsk->group_leader;
 		parent = tsk->real_parent;
 	}
@@ -1553,7 +1619,7 @@ static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
 	info.si_signo = SIGCHLD;
 	info.si_errno = 0;
 	/*
-	 * see comment in do_notify_parent() abot the following 3 lines
+	 * see comment in do_notify_parent() about the following 4 lines
 	 */
 	rcu_read_lock();
 	info.si_pid = task_pid_nr_ns(tsk, parent->nsproxy->pid_ns);
@@ -1611,7 +1677,7 @@ static inline int may_ptrace_stop(void)
 }
 
 /*
- * Return nonzero if there is a SIGKILL that should be waking us up.
+ * Return non-zero if there is a SIGKILL that should be waking us up.
  * Called with the siglock held.
  */
 static int sigkill_pending(struct task_struct *tsk)
@@ -1621,6 +1687,15 @@ static int sigkill_pending(struct task_struct *tsk)
 }
 
 /*
+ * Test whether the target task of the usual cldstop notification - the
+ * real_parent of @child - is in the same group as the ptracer.
+ */
+static bool real_parent_is_ptracer(struct task_struct *child)
+{
+	return same_thread_group(child->parent, child->real_parent);
+}
+
+/*
  * This must be called with current->sighand->siglock held.
  *
  * This should be the path for all ptrace stops.
@@ -1631,10 +1706,12 @@ static int sigkill_pending(struct task_struct *tsk)
  * If we actually decide not to stop at all because the tracer
  * is gone, we keep current->exit_code unless clear_code.
  */
-static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
+static void ptrace_stop(int exit_code, int why, int clear_code, siginfo_t *info)
 	__releases(&current->sighand->siglock)
 	__acquires(&current->sighand->siglock)
 {
+	bool gstop_done = false;
+
 	if (arch_ptrace_stop_needed(exit_code, info)) {
 		/*
 		 * The arch code has something special to do before a
@@ -1655,21 +1732,49 @@ static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 	}
 
 	/*
-	 * If there is a group stop in progress,
-	 * we must participate in the bookkeeping.
+	 * If @why is CLD_STOPPED, we're trapping to participate in a group
+	 * stop.  Do the bookkeeping.  Note that if SIGCONT was delievered
+	 * while siglock was released for the arch hook, PENDING could be
+	 * clear now.  We act as if SIGCONT is received after TASK_TRACED
+	 * is entered - ignore it.
 	 */
-	if (current->signal->group_stop_count > 0)
-		--current->signal->group_stop_count;
+	if (why == CLD_STOPPED && (current->group_stop & GROUP_STOP_PENDING))
+		gstop_done = task_participate_group_stop(current);
 
 	current->last_siginfo = info;
 	current->exit_code = exit_code;
 
-	/* Let the debugger run.  */
-	__set_current_state(TASK_TRACED);
+	/*
+	 * TRACED should be visible before TRAPPING is cleared; otherwise,
+	 * the tracer might fail do_wait().
+	 */
+	set_current_state(TASK_TRACED);
+
+	/*
+	 * We're committing to trapping.  Clearing GROUP_STOP_TRAPPING and
+	 * transition to TASK_TRACED should be atomic with respect to
+	 * siglock.  This hsould be done after the arch hook as siglock is
+	 * released and regrabbed across it.
+	 */
+	task_clear_group_stop_trapping(current);
+
 	spin_unlock_irq(&current->sighand->siglock);
 	read_lock(&tasklist_lock);
 	if (may_ptrace_stop()) {
-		do_notify_parent_cldstop(current, CLD_TRAPPED);
+		/*
+		 * Notify parents of the stop.
+		 *
+		 * While ptraced, there are two parents - the ptracer and
+		 * the real_parent of the group_leader.  The ptracer should
+		 * know about every stop while the real parent is only
+		 * interested in the completion of group stop.  The states
+		 * for the two don't interact with each other.  Notify
+		 * separately unless they're gonna be duplicates.
+		 */
+		do_notify_parent_cldstop(current, true, why);
+		if (gstop_done && !real_parent_is_ptracer(current))
+			do_notify_parent_cldstop(current, false, why);
+
 		/*
 		 * Don't want to allow preemption here, because
 		 * sys_ptrace() needs this task to be inactive.
@@ -1684,7 +1789,16 @@ static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 		/*
 		 * By the time we got the lock, our tracer went away.
 		 * Don't drop the lock yet, another tracer may come.
+		 *
+		 * If @gstop_done, the ptracer went away between group stop
+		 * completion and here.  During detach, it would have set
+		 * GROUP_STOP_PENDING on us and we'll re-enter TASK_STOPPED
+		 * in do_signal_stop() on return, so notifying the real
+		 * parent of the group stop completion is enough.
 		 */
+		if (gstop_done)
+			do_notify_parent_cldstop(current, false, why);
+
 		__set_current_state(TASK_RUNNING);
 		if (clear_code)
 			current->exit_code = 0;
@@ -1728,79 +1842,128 @@ void ptrace_notify(int exit_code)
 
 	/* Let the debugger run.  */
 	spin_lock_irq(&current->sighand->siglock);
-	ptrace_stop(exit_code, 1, &info);
+	ptrace_stop(exit_code, CLD_TRAPPED, 1, &info);
 	spin_unlock_irq(&current->sighand->siglock);
 }
 
 /*
  * This performs the stopping for SIGSTOP and other stop signals.
  * We have to stop all threads in the thread group.
- * Returns nonzero if we've actually stopped and released the siglock.
+ * Returns non-zero if we've actually stopped and released the siglock.
  * Returns zero if we didn't stop and still hold the siglock.
  */
 static int do_signal_stop(int signr)
 {
 	struct signal_struct *sig = current->signal;
-	int notify;
 
-	if (!sig->group_stop_count) {
+	if (!(current->group_stop & GROUP_STOP_PENDING)) {
+		unsigned int gstop = GROUP_STOP_PENDING | GROUP_STOP_CONSUME;
 		struct task_struct *t;
 
-		if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
+		/* signr will be recorded in task->group_stop for retries */
+		WARN_ON_ONCE(signr & ~GROUP_STOP_SIGMASK);
+
+		if (!likely(current->group_stop & GROUP_STOP_DEQUEUED) ||
 		    unlikely(signal_group_exit(sig)))
 			return 0;
 		/*
-		 * There is no group stop already in progress.
-		 * We must initiate one now.
+		 * There is no group stop already in progress.  We must
+		 * initiate one now.
+		 *
+		 * While ptraced, a task may be resumed while group stop is
+		 * still in effect and then receive a stop signal and
+		 * initiate another group stop.  This deviates from the
+		 * usual behavior as two consecutive stop signals can't
+		 * cause two group stops when !ptraced.  That is why we
+		 * also check !task_is_stopped(t) below.
+		 *
+		 * The condition can be distinguished by testing whether
+		 * SIGNAL_STOP_STOPPED is already set.  Don't generate
+		 * group_exit_code in such case.
+		 *
+		 * This is not necessary for SIGNAL_STOP_CONTINUED because
+		 * an intervening stop signal is required to cause two
+		 * continued events regardless of ptrace.
 		 */
-		sig->group_exit_code = signr;
+		if (!(sig->flags & SIGNAL_STOP_STOPPED))
+			sig->group_exit_code = signr;
+		else
+			WARN_ON_ONCE(!task_ptrace(current));
 
+		current->group_stop &= ~GROUP_STOP_SIGMASK;
+		current->group_stop |= signr | gstop;
 		sig->group_stop_count = 1;
-		for (t = next_thread(current); t != current; t = next_thread(t))
+		for (t = next_thread(current); t != current;
+		     t = next_thread(t)) {
+			t->group_stop &= ~GROUP_STOP_SIGMASK;
 			/*
 			 * Setting state to TASK_STOPPED for a group
 			 * stop is always done with the siglock held,
 			 * so this check has no races.
 			 */
-			if (!(t->flags & PF_EXITING) &&
-			    !task_is_stopped_or_traced(t)) {
+			if (!(t->flags & PF_EXITING) && !task_is_stopped(t)) {
+				t->group_stop |= signr | gstop;
 				sig->group_stop_count++;
 				signal_wake_up(t, 0);
 			}
+		}
 	}
-	/*
-	 * If there are no other threads in the group, or if there is
-	 * a group stop in progress and we are the last to stop, report
-	 * to the parent.  When ptraced, every thread reports itself.
-	 */
-	notify = sig->group_stop_count == 1 ? CLD_STOPPED : 0;
-	notify = tracehook_notify_jctl(notify, CLD_STOPPED);
-	/*
-	 * tracehook_notify_jctl() can drop and reacquire siglock, so
-	 * we keep ->group_stop_count != 0 before the call. If SIGCONT
-	 * or SIGKILL comes in between ->group_stop_count == 0.
-	 */
-	if (sig->group_stop_count) {
-		if (!--sig->group_stop_count)
-			sig->flags = SIGNAL_STOP_STOPPED;
-		current->exit_code = sig->group_exit_code;
+retry:
+	if (likely(!task_ptrace(current))) {
+		int notify = 0;
+
+		/*
+		 * If there are no other threads in the group, or if there
+		 * is a group stop in progress and we are the last to stop,
+		 * report to the parent.
+		 */
+		if (task_participate_group_stop(current))
+			notify = CLD_STOPPED;
+
 		__set_current_state(TASK_STOPPED);
+		spin_unlock_irq(&current->sighand->siglock);
+
+		/*
+		 * Notify the parent of the group stop completion.  Because
+		 * we're not holding either the siglock or tasklist_lock
+		 * here, ptracer may attach inbetween; however, this is for
+		 * group stop and should always be delivered to the real
+		 * parent of the group leader.  The new ptracer will get
+		 * its notification when this task transitions into
+		 * TASK_TRACED.
+		 */
+		if (notify) {
+			read_lock(&tasklist_lock);
+			do_notify_parent_cldstop(current, false, notify);
+			read_unlock(&tasklist_lock);
+		}
+
+		/* Now we don't run again until woken by SIGCONT or SIGKILL */
+		schedule();
+
+		spin_lock_irq(&current->sighand->siglock);
+	} else {
+		ptrace_stop(current->group_stop & GROUP_STOP_SIGMASK,
+			    CLD_STOPPED, 0, NULL);
+		current->exit_code = 0;
 	}
-	spin_unlock_irq(&current->sighand->siglock);
 
-	if (notify) {
-		read_lock(&tasklist_lock);
-		do_notify_parent_cldstop(current, notify);
-		read_unlock(&tasklist_lock);
+	/*
+	 * GROUP_STOP_PENDING could be set if another group stop has
+	 * started since being woken up or ptrace wants us to transit
+	 * between TASK_STOPPED and TRACED.  Retry group stop.
+	 */
+	if (current->group_stop & GROUP_STOP_PENDING) {
+		WARN_ON_ONCE(!(current->group_stop & GROUP_STOP_SIGMASK));
+		goto retry;
 	}
 
-	/* Now we don't run again until woken by SIGCONT or SIGKILL */
-	do {
-		schedule();
-	} while (try_to_freeze());
+	/* PTRACE_ATTACH might have raced with task killing, clear trapping */
+	task_clear_group_stop_trapping(current);
+
+	spin_unlock_irq(&current->sighand->siglock);
 
 	tracehook_finish_jctl();
-	current->exit_code = 0;
 
 	return 1;
 }
@@ -1814,7 +1977,7 @@ static int ptrace_signal(int signr, siginfo_t *info,
 	ptrace_signal_deliver(regs, cookie);
 
 	/* Let the debugger run.  */
-	ptrace_stop(signr, 0, info);
+	ptrace_stop(signr, CLD_TRAPPED, 0, info);
 
 	/* We're back.  Did the debugger cancel the sig?  */
 	signr = current->exit_code;
@@ -1823,10 +1986,12 @@ static int ptrace_signal(int signr, siginfo_t *info,
 
 	current->exit_code = 0;
 
-	/* Update the siginfo structure if the signal has
-	   changed.  If the debugger wanted something
-	   specific in the siginfo structure then it should
-	   have updated *info via PTRACE_SETSIGINFO.  */
+	/*
+	 * Update the siginfo structure if the signal has
+	 * changed.  If the debugger wanted something
+	 * specific in the siginfo structure then it should
+	 * have updated *info via PTRACE_SETSIGINFO.
+	 */
 	if (signr != info->si_signo) {
 		info->si_signo = signr;
 		info->si_errno = 0;
@@ -1867,25 +2032,43 @@ relock:
 	 * the CLD_ si_code into SIGNAL_CLD_MASK bits.
 	 */
 	if (unlikely(signal->flags & SIGNAL_CLD_MASK)) {
-		int why = (signal->flags & SIGNAL_STOP_CONTINUED)
-				? CLD_CONTINUED : CLD_STOPPED;
+		struct task_struct *leader;
+		int why;
+
+		if (signal->flags & SIGNAL_CLD_CONTINUED)
+			why = CLD_CONTINUED;
+		else
+			why = CLD_STOPPED;
+
 		signal->flags &= ~SIGNAL_CLD_MASK;
 
-		why = tracehook_notify_jctl(why, CLD_CONTINUED);
 		spin_unlock_irq(&sighand->siglock);
 
-		if (why) {
-			read_lock(&tasklist_lock);
-			do_notify_parent_cldstop(current->group_leader, why);
-			read_unlock(&tasklist_lock);
-		}
+		/*
+		 * Notify the parent that we're continuing.  This event is
+		 * always per-process and doesn't make whole lot of sense
+		 * for ptracers, who shouldn't consume the state via
+		 * wait(2) either, but, for backward compatibility, notify
+		 * the ptracer of the group leader too unless it's gonna be
+		 * a duplicate.
+		 */
+		read_lock(&tasklist_lock);
+
+		do_notify_parent_cldstop(current, false, why);
+
+		leader = current->group_leader;
+		if (task_ptrace(leader) && !real_parent_is_ptracer(leader))
+			do_notify_parent_cldstop(leader, true, why);
+
+		read_unlock(&tasklist_lock);
+
 		goto relock;
 	}
 
 	for (;;) {
 		struct k_sigaction *ka;
 		/*
-		 * Tracing can induce an artifical signal and choose sigaction.
+		 * Tracing can induce an artificial signal and choose sigaction.
 		 * The return value in @signr determines the default action,
 		 * but @info->si_signo is the signal number we will report.
 		 */
@@ -1895,8 +2078,8 @@ relock:
 		if (unlikely(signr != 0))
 			ka = return_ka;
 		else {
-			if (unlikely(signal->group_stop_count > 0) &&
-			    do_signal_stop(0))
+			if (unlikely(current->group_stop &
+				     GROUP_STOP_PENDING) && do_signal_stop(0))
 				goto relock;
 
 			signr = dequeue_signal(current, &current->blocked,
@@ -2015,10 +2198,42 @@ relock:
 	return signr;
 }
 
+/*
+ * It could be that complete_signal() picked us to notify about the
+ * group-wide signal. Other threads should be notified now to take
+ * the shared signals in @which since we will not.
+ */
+static void retarget_shared_pending(struct task_struct *tsk, sigset_t *which)
+{
+	sigset_t retarget;
+	struct task_struct *t;
+
+	sigandsets(&retarget, &tsk->signal->shared_pending.signal, which);
+	if (sigisemptyset(&retarget))
+		return;
+
+	t = tsk;
+	while_each_thread(tsk, t) {
+		if (t->flags & PF_EXITING)
+			continue;
+
+		if (!has_pending_signals(&retarget, &t->blocked))
+			continue;
+		/* Remove the signals this thread can handle. */
+		sigandsets(&retarget, &retarget, &t->blocked);
+
+		if (!signal_pending(t))
+			signal_wake_up(t, 0);
+
+		if (sigisemptyset(&retarget))
+			break;
+	}
+}
+
 void exit_signals(struct task_struct *tsk)
 {
 	int group_stop = 0;
-	struct task_struct *t;
+	sigset_t unblocked;
 
 	if (thread_group_empty(tsk) || signal_group_exit(tsk->signal)) {
 		tsk->flags |= PF_EXITING;
@@ -2034,25 +2249,23 @@ void exit_signals(struct task_struct *tsk)
 	if (!signal_pending(tsk))
 		goto out;
 
-	/* It could be that __group_complete_signal() choose us to
-	 * notify about group-wide signal. Another thread should be
-	 * woken now to take the signal since we will not.
-	 */
-	for (t = tsk; (t = next_thread(t)) != tsk; )
-		if (!signal_pending(t) && !(t->flags & PF_EXITING))
-			recalc_sigpending_and_wake(t);
+	unblocked = tsk->blocked;
+	signotset(&unblocked);
+	retarget_shared_pending(tsk, &unblocked);
 
-	if (unlikely(tsk->signal->group_stop_count) &&
-			!--tsk->signal->group_stop_count) {
-		tsk->signal->flags = SIGNAL_STOP_STOPPED;
-		group_stop = tracehook_notify_jctl(CLD_STOPPED, CLD_STOPPED);
-	}
+	if (unlikely(tsk->group_stop & GROUP_STOP_PENDING) &&
+	    task_participate_group_stop(tsk))
+		group_stop = CLD_STOPPED;
 out:
 	spin_unlock_irq(&tsk->sighand->siglock);
 
+	/*
+	 * If group stop has completed, deliver the notification.  This
+	 * should always go to the real parent of the group leader.
+	 */
 	if (unlikely(group_stop)) {
 		read_lock(&tasklist_lock);
-		do_notify_parent_cldstop(tsk, group_stop);
+		do_notify_parent_cldstop(tsk, false, group_stop);
 		read_unlock(&tasklist_lock);
 	}
 }
@@ -2072,6 +2285,9 @@ EXPORT_SYMBOL(unblock_all_signals);
  * System call entry points.
  */
 
+/**
+ *  sys_restart_syscall - restart a system call
+ */
 SYSCALL_DEFINE0(restart_syscall)
 {
 	struct restart_block *restart = &current_thread_info()->restart_block;
@@ -2083,11 +2299,33 @@ long do_no_restart_syscall(struct restart_block *param)
 	return -EINTR;
 }
 
-/*
- * We don't need to get the kernel lock - this is all local to this
- * particular thread.. (and that's good, because this is _heavily_
- * used by various programs)
+static void __set_task_blocked(struct task_struct *tsk, const sigset_t *newset)
+{
+	if (signal_pending(tsk) && !thread_group_empty(tsk)) {
+		sigset_t newblocked;
+		/* A set of now blocked but previously unblocked signals. */
+		sigandnsets(&newblocked, newset, &current->blocked);
+		retarget_shared_pending(tsk, &newblocked);
+	}
+	tsk->blocked = *newset;
+	recalc_sigpending();
+}
+
+/**
+ * set_current_blocked - change current->blocked mask
+ * @newset: new mask
+ *
+ * It is wrong to change ->blocked directly, this helper should be used
+ * to ensure the process can't miss a shared signal we are going to block.
  */
+void set_current_blocked(const sigset_t *newset)
+{
+	struct task_struct *tsk = current;
+
+	spin_lock_irq(&tsk->sighand->siglock);
+	__set_task_blocked(tsk, newset);
+	spin_unlock_irq(&tsk->sighand->siglock);
+}
 
 /*
  * This is also useful for kernel threads that want to temporarily
@@ -2099,66 +2337,66 @@ long do_no_restart_syscall(struct restart_block *param)
  */
 int sigprocmask(int how, sigset_t *set, sigset_t *oldset)
 {
-	int error;
+	struct task_struct *tsk = current;
+	sigset_t newset;
 
-	spin_lock_irq(&current->sighand->siglock);
+	/* Lockless, only current can change ->blocked, never from irq */
 	if (oldset)
-		*oldset = current->blocked;
+		*oldset = tsk->blocked;
 
-	error = 0;
 	switch (how) {
 	case SIG_BLOCK:
-		sigorsets(&current->blocked, &current->blocked, set);
+		sigorsets(&newset, &tsk->blocked, set);
 		break;
 	case SIG_UNBLOCK:
-		signandsets(&current->blocked, &current->blocked, set);
+		sigandnsets(&newset, &tsk->blocked, set);
 		break;
 	case SIG_SETMASK:
-		current->blocked = *set;
+		newset = *set;
 		break;
 	default:
-		error = -EINVAL;
+		return -EINVAL;
 	}
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
 
-	return error;
+	set_current_blocked(&newset);
+	return 0;
 }
 
-SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, set,
+/**
+ *  sys_rt_sigprocmask - change the list of currently blocked signals
+ *  @how: whether to add, remove, or set signals
+ *  @set: stores pending signals
+ *  @oset: previous value of signal mask if non-null
+ *  @sigsetsize: size of sigset_t type
+ */
+SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, nset,
 		sigset_t __user *, oset, size_t, sigsetsize)
 {
-	int error = -EINVAL;
 	sigset_t old_set, new_set;
+	int error;
 
 	/* XXX: Don't preclude handling different sized sigset_t's.  */
 	if (sigsetsize != sizeof(sigset_t))
-		goto out;
+		return -EINVAL;
 
-	if (set) {
-		error = -EFAULT;
-		if (copy_from_user(&new_set, set, sizeof(*set)))
-			goto out;
+	old_set = current->blocked;
+
+	if (nset) {
+		if (copy_from_user(&new_set, nset, sizeof(sigset_t)))
+			return -EFAULT;
 		sigdelsetmask(&new_set, sigmask(SIGKILL)|sigmask(SIGSTOP));
 
-		error = sigprocmask(how, &new_set, &old_set);
+		error = sigprocmask(how, &new_set, NULL);
 		if (error)
-			goto out;
-		if (oset)
-			goto set_old;
-	} else if (oset) {
-		spin_lock_irq(&current->sighand->siglock);
-		old_set = current->blocked;
-		spin_unlock_irq(&current->sighand->siglock);
+			return error;
+	}
 
-	set_old:
-		error = -EFAULT;
-		if (copy_to_user(oset, &old_set, sizeof(*oset)))
-			goto out;
+	if (oset) {
+		if (copy_to_user(oset, &old_set, sizeof(sigset_t)))
+			return -EFAULT;
 	}
-	error = 0;
-out:
-	return error;
+
+	return 0;
 }
 
 long do_sigpending(void __user *set, unsigned long sigsetsize)
@@ -2183,8 +2421,14 @@ long do_sigpending(void __user *set, unsigned long sigsetsize)
 
 out:
 	return error;
-}	
+}
 
+/**
+ *  sys_rt_sigpending - examine a pending signal that has been raised
+ *			while blocked
+ *  @set: stores pending signals
+ *  @sigsetsize: size of sigset_t type or larger
+ */
 SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize)
 {
 	return do_sigpending(set, sigsetsize);
@@ -2233,9 +2477,9 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from)
 		err |= __put_user(from->si_trapno, &to->si_trapno);
 #endif
 #ifdef BUS_MCEERR_AO
-		/* 
+		/*
 		 * Other callers might not initialize the si_lsb field,
-	 	 * so check explicitely for the right codes here.
+		 * so check explicitly for the right codes here.
 		 */
 		if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
 			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
@@ -2264,15 +2508,82 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from)
 
 #endif
 
+/**
+ *  do_sigtimedwait - wait for queued signals specified in @which
+ *  @which: queued signals to wait for
+ *  @info: if non-null, the signal's siginfo is returned here
+ *  @ts: upper bound on process time suspension
+ */
+int do_sigtimedwait(const sigset_t *which, siginfo_t *info,
+			const struct timespec *ts)
+{
+	struct task_struct *tsk = current;
+	long timeout = MAX_SCHEDULE_TIMEOUT;
+	sigset_t mask = *which;
+	int sig;
+
+	if (ts) {
+		if (!timespec_valid(ts))
+			return -EINVAL;
+		timeout = timespec_to_jiffies(ts);
+		/*
+		 * We can be close to the next tick, add another one
+		 * to ensure we will wait at least the time asked for.
+		 */
+		if (ts->tv_sec || ts->tv_nsec)
+			timeout++;
+	}
+
+	/*
+	 * Invert the set of allowed signals to get those we want to block.
+	 */
+	sigdelsetmask(&mask, sigmask(SIGKILL) | sigmask(SIGSTOP));
+	signotset(&mask);
+
+	spin_lock_irq(&tsk->sighand->siglock);
+	sig = dequeue_signal(tsk, &mask, info);
+	if (!sig && timeout) {
+		/*
+		 * None ready, temporarily unblock those we're interested
+		 * while we are sleeping in so that we'll be awakened when
+		 * they arrive. Unblocking is always fine, we can avoid
+		 * set_current_blocked().
+		 */
+		tsk->real_blocked = tsk->blocked;
+		sigandsets(&tsk->blocked, &tsk->blocked, &mask);
+		recalc_sigpending();
+		spin_unlock_irq(&tsk->sighand->siglock);
+
+		timeout = schedule_timeout_interruptible(timeout);
+
+		spin_lock_irq(&tsk->sighand->siglock);
+		__set_task_blocked(tsk, &tsk->real_blocked);
+		siginitset(&tsk->real_blocked, 0);
+		sig = dequeue_signal(tsk, &mask, info);
+	}
+	spin_unlock_irq(&tsk->sighand->siglock);
+
+	if (sig)
+		return sig;
+	return timeout ? -EINTR : -EAGAIN;
+}
+
+/**
+ *  sys_rt_sigtimedwait - synchronously wait for queued signals specified
+ *			in @uthese
+ *  @uthese: queued signals to wait for
+ *  @uinfo: if non-null, the signal's siginfo is returned here
+ *  @uts: upper bound on process time suspension
+ *  @sigsetsize: size of sigset_t type
+ */
 SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
 		siginfo_t __user *, uinfo, const struct timespec __user *, uts,
 		size_t, sigsetsize)
 {
-	int ret, sig;
 	sigset_t these;
 	struct timespec ts;
 	siginfo_t info;
-	long timeout = 0;
+	int ret;
 
 	/* XXX: Don't preclude handling different sized sigset_t's.  */
 	if (sigsetsize != sizeof(sigset_t))
@@ -2280,65 +2591,27 @@ SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
 
 	if (copy_from_user(&these, uthese, sizeof(these)))
 		return -EFAULT;
-		
-	/*
-	 * Invert the set of allowed signals to get those we
-	 * want to block.
-	 */
-	sigdelsetmask(&these, sigmask(SIGKILL)|sigmask(SIGSTOP));
-	signotset(&these);
 
 	if (uts) {
 		if (copy_from_user(&ts, uts, sizeof(ts)))
 			return -EFAULT;
-		if (ts.tv_nsec >= 1000000000L || ts.tv_nsec < 0
-		    || ts.tv_sec < 0)
-			return -EINVAL;
 	}
 
-	spin_lock_irq(&current->sighand->siglock);
-	sig = dequeue_signal(current, &these, &info);
-	if (!sig) {
-		timeout = MAX_SCHEDULE_TIMEOUT;
-		if (uts)
-			timeout = (timespec_to_jiffies(&ts)
-				   + (ts.tv_sec || ts.tv_nsec));
-
-		if (timeout) {
-			/* None ready -- temporarily unblock those we're
-			 * interested while we are sleeping in so that we'll
-			 * be awakened when they arrive.  */
-			current->real_blocked = current->blocked;
-			sigandsets(&current->blocked, &current->blocked, &these);
-			recalc_sigpending();
-			spin_unlock_irq(&current->sighand->siglock);
-
-			timeout = schedule_timeout_interruptible(timeout);
-
-			spin_lock_irq(&current->sighand->siglock);
-			sig = dequeue_signal(current, &these, &info);
-			current->blocked = current->real_blocked;
-			siginitset(&current->real_blocked, 0);
-			recalc_sigpending();
-		}
-	}
-	spin_unlock_irq(&current->sighand->siglock);
+	ret = do_sigtimedwait(&these, &info, uts ? &ts : NULL);
 
-	if (sig) {
-		ret = sig;
-		if (uinfo) {
-			if (copy_siginfo_to_user(uinfo, &info))
-				ret = -EFAULT;
-		}
-	} else {
-		ret = -EAGAIN;
-		if (timeout)
-			ret = -EINTR;
+	if (ret > 0 && uinfo) {
+		if (copy_siginfo_to_user(uinfo, &info))
+			ret = -EFAULT;
 	}
 
 	return ret;
 }
 
+/**
+ *  sys_kill - send a signal to a process
+ *  @pid: the PID of the process
+ *  @sig: signal to be sent
+ */
 SYSCALL_DEFINE2(kill, pid_t, pid, int, sig)
 {
 	struct siginfo info;
@@ -2414,7 +2687,11 @@ SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig)
 	return do_tkill(tgid, pid, sig);
 }
 
-/*
+/**
+ *  sys_tkill - send signal to one specific task
+ *  @pid: the PID of the task
+ *  @sig: signal to be sent
+ *
  *  Send a signal to only one task, even if it's a CLONE_THREAD task.
  */
 SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
@@ -2426,6 +2703,12 @@ SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
 	return do_tkill(0, pid, sig);
 }
 
+/**
+ *  sys_rt_sigqueueinfo - send signal information to a signal
+ *  @pid: the PID of the thread
+ *  @sig: signal to be sent
+ *  @uinfo: signal info to be sent
+ */
 SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig,
 		siginfo_t __user *, uinfo)
 {
@@ -2553,12 +2836,11 @@ do_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, unsigned long s
 
 		error = -EINVAL;
 		/*
-		 *
-		 * Note - this code used to test ss_flags incorrectly
+		 * Note - this code used to test ss_flags incorrectly:
 		 *  	  old code may have been written using ss_flags==0
 		 *	  to mean ss_flags==SS_ONSTACK (as this was the only
 		 *	  way that worked) - this fix preserves that older
-		 *	  mechanism
+		 *	  mechanism.
 		 */
 		if (ss_flags != SS_DISABLE && ss_flags != SS_ONSTACK && ss_flags != 0)
 			goto out;
@@ -2592,6 +2874,10 @@ out:
 
 #ifdef __ARCH_WANT_SYS_SIGPENDING
 
+/**
+ *  sys_sigpending - examine pending signals
+ *  @set: where mask of pending signal is returned
+ */
 SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
 {
 	return do_sigpending(set, sizeof(*set));
@@ -2600,60 +2886,65 @@ SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
 #endif
 
 #ifdef __ARCH_WANT_SYS_SIGPROCMASK
-/* Some platforms have their own version with special arguments others
-   support only sys_rt_sigprocmask.  */
+/**
+ *  sys_sigprocmask - examine and change blocked signals
+ *  @how: whether to add, remove, or set signals
+ *  @nset: signals to add or remove (if non-null)
+ *  @oset: previous value of signal mask if non-null
+ *
+ * Some platforms have their own version with special arguments;
+ * others support only sys_rt_sigprocmask.
+ */
 
-SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, set,
+SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, nset,
 		old_sigset_t __user *, oset)
 {
-	int error;
 	old_sigset_t old_set, new_set;
+	sigset_t new_blocked;
 
-	if (set) {
-		error = -EFAULT;
-		if (copy_from_user(&new_set, set, sizeof(*set)))
-			goto out;
+	old_set = current->blocked.sig[0];
+
+	if (nset) {
+		if (copy_from_user(&new_set, nset, sizeof(*nset)))
+			return -EFAULT;
 		new_set &= ~(sigmask(SIGKILL) | sigmask(SIGSTOP));
 
-		spin_lock_irq(&current->sighand->siglock);
-		old_set = current->blocked.sig[0];
+		new_blocked = current->blocked;
 
-		error = 0;
 		switch (how) {
-		default:
-			error = -EINVAL;
-			break;
 		case SIG_BLOCK:
-			sigaddsetmask(&current->blocked, new_set);
+			sigaddsetmask(&new_blocked, new_set);
 			break;
 		case SIG_UNBLOCK:
-			sigdelsetmask(&current->blocked, new_set);
+			sigdelsetmask(&new_blocked, new_set);
 			break;
 		case SIG_SETMASK:
-			current->blocked.sig[0] = new_set;
+			new_blocked.sig[0] = new_set;
 			break;
+		default:
+			return -EINVAL;
 		}
 
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-		if (error)
-			goto out;
-		if (oset)
-			goto set_old;
-	} else if (oset) {
-		old_set = current->blocked.sig[0];
-	set_old:
-		error = -EFAULT;
+		set_current_blocked(&new_blocked);
+	}
+
+	if (oset) {
 		if (copy_to_user(oset, &old_set, sizeof(*oset)))
-			goto out;
+			return -EFAULT;
 	}
-	error = 0;
-out:
-	return error;
+
+	return 0;
 }
 #endif /* __ARCH_WANT_SYS_SIGPROCMASK */
 
 #ifdef __ARCH_WANT_SYS_RT_SIGACTION
+/**
+ *  sys_rt_sigaction - alter an action taken by a process
+ *  @sig: signal to be sent
+ *  @act: new sigaction
+ *  @oact: used to save the previous sigaction
+ *  @sigsetsize: size of sigset_t type
+ */
 SYSCALL_DEFINE4(rt_sigaction, int, sig,
 		const struct sigaction __user *, act,
 		struct sigaction __user *, oact,
@@ -2740,6 +3031,12 @@ SYSCALL_DEFINE0(pause)
 #endif
 
 #ifdef __ARCH_WANT_SYS_RT_SIGSUSPEND
+/**
+ *  sys_rt_sigsuspend - replace the signal mask for a value with the
+ *	@unewset value until a signal is received
+ *  @unewset: new signal mask value
+ *  @sigsetsize: size of sigset_t type
+ */
 SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize)
 {
 	sigset_t newset;
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 735d8709517..13960170cad 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -58,7 +58,7 @@ DEFINE_PER_CPU(struct task_struct *, ksoftirqd);
 
 char *softirq_to_name[NR_SOFTIRQS] = {
 	"HI", "TIMER", "NET_TX", "NET_RX", "BLOCK", "BLOCK_IOPOLL",
-	"TASKLET", "SCHED", "HRTIMER",	"RCU"
+	"TASKLET", "SCHED", "HRTIMER"
 };
 
 /*
@@ -567,7 +567,7 @@ static void __tasklet_hrtimer_trampoline(unsigned long data)
 /**
  * tasklet_hrtimer_init - Init a tasklet/hrtimer combo for softirq callbacks
  * @ttimer:	 tasklet_hrtimer which is initialized
- * @function:	 hrtimer callback funtion which gets called from softirq context
+ * @function:	 hrtimer callback function which gets called from softirq context
  * @which_clock: clock id (CLOCK_MONOTONIC/CLOCK_REALTIME)
  * @mode:	 hrtimer mode (HRTIMER_MODE_ABS/HRTIMER_MODE_REL)
  */
diff --git a/kernel/sys.c b/kernel/sys.c
index af468edf096..e4128b278f2 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -314,8 +314,8 @@ void kernel_restart_prepare(char *cmd)
 {
 	blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
 	system_state = SYSTEM_RESTART;
+	usermodehelper_disable();
 	device_shutdown();
-	sysdev_shutdown();
 	syscore_shutdown();
 }
 
@@ -344,6 +344,7 @@ static void kernel_shutdown_prepare(enum system_states state)
 	blocking_notifier_call_chain(&reboot_notifier_list,
 		(state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
 	system_state = state;
+	usermodehelper_disable();
 	device_shutdown();
 }
 /**
@@ -354,7 +355,6 @@ static void kernel_shutdown_prepare(enum system_states state)
 void kernel_halt(void)
 {
 	kernel_shutdown_prepare(SYSTEM_HALT);
-	sysdev_shutdown();
 	syscore_shutdown();
 	printk(KERN_EMERG "System halted.\n");
 	kmsg_dump(KMSG_DUMP_HALT);
@@ -374,7 +374,6 @@ void kernel_power_off(void)
 	if (pm_power_off_prepare)
 		pm_power_off_prepare();
 	disable_nonboot_cpus();
-	sysdev_shutdown();
 	syscore_shutdown();
 	printk(KERN_EMERG "Power down.\n");
 	kmsg_dump(KMSG_DUMP_POWEROFF);
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 25cc41cd8f3..62cbc8877fe 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -46,7 +46,9 @@ cond_syscall(sys_getsockopt);
 cond_syscall(compat_sys_getsockopt);
 cond_syscall(sys_shutdown);
 cond_syscall(sys_sendmsg);
+cond_syscall(sys_sendmmsg);
 cond_syscall(compat_sys_sendmsg);
+cond_syscall(compat_sys_sendmmsg);
 cond_syscall(sys_recvmsg);
 cond_syscall(sys_recvmmsg);
 cond_syscall(compat_sys_recvmsg);
@@ -69,15 +71,22 @@ cond_syscall(compat_sys_epoll_pwait);
 cond_syscall(sys_semget);
 cond_syscall(sys_semop);
 cond_syscall(sys_semtimedop);
+cond_syscall(compat_sys_semtimedop);
 cond_syscall(sys_semctl);
+cond_syscall(compat_sys_semctl);
 cond_syscall(sys_msgget);
 cond_syscall(sys_msgsnd);
+cond_syscall(compat_sys_msgsnd);
 cond_syscall(sys_msgrcv);
+cond_syscall(compat_sys_msgrcv);
 cond_syscall(sys_msgctl);
+cond_syscall(compat_sys_msgctl);
 cond_syscall(sys_shmget);
 cond_syscall(sys_shmat);
+cond_syscall(compat_sys_shmat);
 cond_syscall(sys_shmdt);
 cond_syscall(sys_shmctl);
+cond_syscall(compat_sys_shmctl);
 cond_syscall(sys_mq_open);
 cond_syscall(sys_mq_unlink);
 cond_syscall(sys_mq_timedsend);
diff --git a/kernel/time/Makefile b/kernel/time/Makefile
index b0425991e9a..e2fd74b8e8c 100644
--- a/kernel/time/Makefile
+++ b/kernel/time/Makefile
@@ -1,5 +1,5 @@
 obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o timecompare.o
-obj-y += timeconv.o posix-clock.o
+obj-y += timeconv.o posix-clock.o alarmtimer.o
 
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BUILD)		+= clockevents.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS)		+= tick-common.o
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
new file mode 100644
index 00000000000..9265014cb4d
--- /dev/null
+++ b/kernel/time/alarmtimer.c
@@ -0,0 +1,694 @@
+/*
+ * Alarmtimer interface
+ *
+ * This interface provides a timer which is similarto hrtimers,
+ * but triggers a RTC alarm if the box is suspend.
+ *
+ * This interface is influenced by the Android RTC Alarm timer
+ * interface.
+ *
+ * Copyright (C) 2010 IBM Corperation
+ *
+ * Author: John Stultz <john.stultz@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/time.h>
+#include <linux/hrtimer.h>
+#include <linux/timerqueue.h>
+#include <linux/rtc.h>
+#include <linux/alarmtimer.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/posix-timers.h>
+#include <linux/workqueue.h>
+#include <linux/freezer.h>
+
+/**
+ * struct alarm_base - Alarm timer bases
+ * @lock:		Lock for syncrhonized access to the base
+ * @timerqueue:		Timerqueue head managing the list of events
+ * @timer: 		hrtimer used to schedule events while running
+ * @gettime:		Function to read the time correlating to the base
+ * @base_clockid:	clockid for the base
+ */
+static struct alarm_base {
+	spinlock_t		lock;
+	struct timerqueue_head	timerqueue;
+	struct hrtimer		timer;
+	ktime_t			(*gettime)(void);
+	clockid_t		base_clockid;
+} alarm_bases[ALARM_NUMTYPE];
+
+#ifdef CONFIG_RTC_CLASS
+/* rtc timer and device for setting alarm wakeups at suspend */
+static struct rtc_timer		rtctimer;
+static struct rtc_device	*rtcdev;
+#endif
+
+/* freezer delta & lock used to handle clock_nanosleep triggered wakeups */
+static ktime_t freezer_delta;
+static DEFINE_SPINLOCK(freezer_delta_lock);
+
+
+/**
+ * alarmtimer_enqueue - Adds an alarm timer to an alarm_base timerqueue
+ * @base: pointer to the base where the timer is being run
+ * @alarm: pointer to alarm being enqueued.
+ *
+ * Adds alarm to a alarm_base timerqueue and if necessary sets
+ * an hrtimer to run.
+ *
+ * Must hold base->lock when calling.
+ */
+static void alarmtimer_enqueue(struct alarm_base *base, struct alarm *alarm)
+{
+	timerqueue_add(&base->timerqueue, &alarm->node);
+	if (&alarm->node == timerqueue_getnext(&base->timerqueue)) {
+		hrtimer_try_to_cancel(&base->timer);
+		hrtimer_start(&base->timer, alarm->node.expires,
+				HRTIMER_MODE_ABS);
+	}
+}
+
+/**
+ * alarmtimer_remove - Removes an alarm timer from an alarm_base timerqueue
+ * @base: pointer to the base where the timer is running
+ * @alarm: pointer to alarm being removed
+ *
+ * Removes alarm to a alarm_base timerqueue and if necessary sets
+ * a new timer to run.
+ *
+ * Must hold base->lock when calling.
+ */
+static void alarmtimer_remove(struct alarm_base *base, struct alarm *alarm)
+{
+	struct timerqueue_node *next = timerqueue_getnext(&base->timerqueue);
+
+	timerqueue_del(&base->timerqueue, &alarm->node);
+	if (next == &alarm->node) {
+		hrtimer_try_to_cancel(&base->timer);
+		next = timerqueue_getnext(&base->timerqueue);
+		if (!next)
+			return;
+		hrtimer_start(&base->timer, next->expires, HRTIMER_MODE_ABS);
+	}
+}
+
+
+/**
+ * alarmtimer_fired - Handles alarm hrtimer being fired.
+ * @timer: pointer to hrtimer being run
+ *
+ * When a alarm timer fires, this runs through the timerqueue to
+ * see which alarms expired, and runs those. If there are more alarm
+ * timers queued for the future, we set the hrtimer to fire when
+ * when the next future alarm timer expires.
+ */
+static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer)
+{
+	struct alarm_base *base = container_of(timer, struct alarm_base, timer);
+	struct timerqueue_node *next;
+	unsigned long flags;
+	ktime_t now;
+	int ret = HRTIMER_NORESTART;
+
+	spin_lock_irqsave(&base->lock, flags);
+	now = base->gettime();
+	while ((next = timerqueue_getnext(&base->timerqueue))) {
+		struct alarm *alarm;
+		ktime_t expired = next->expires;
+
+		if (expired.tv64 >= now.tv64)
+			break;
+
+		alarm = container_of(next, struct alarm, node);
+
+		timerqueue_del(&base->timerqueue, &alarm->node);
+		alarm->enabled = 0;
+		/* Re-add periodic timers */
+		if (alarm->period.tv64) {
+			alarm->node.expires = ktime_add(expired, alarm->period);
+			timerqueue_add(&base->timerqueue, &alarm->node);
+			alarm->enabled = 1;
+		}
+		spin_unlock_irqrestore(&base->lock, flags);
+		if (alarm->function)
+			alarm->function(alarm);
+		spin_lock_irqsave(&base->lock, flags);
+	}
+
+	if (next) {
+		hrtimer_set_expires(&base->timer, next->expires);
+		ret = HRTIMER_RESTART;
+	}
+	spin_unlock_irqrestore(&base->lock, flags);
+
+	return ret;
+
+}
+
+#ifdef CONFIG_RTC_CLASS
+/**
+ * alarmtimer_suspend - Suspend time callback
+ * @dev: unused
+ * @state: unused
+ *
+ * When we are going into suspend, we look through the bases
+ * to see which is the soonest timer to expire. We then
+ * set an rtc timer to fire that far into the future, which
+ * will wake us from suspend.
+ */
+static int alarmtimer_suspend(struct device *dev)
+{
+	struct rtc_time tm;
+	ktime_t min, now;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&freezer_delta_lock, flags);
+	min = freezer_delta;
+	freezer_delta = ktime_set(0, 0);
+	spin_unlock_irqrestore(&freezer_delta_lock, flags);
+
+	/* If we have no rtcdev, just return */
+	if (!rtcdev)
+		return 0;
+
+	/* Find the soonest timer to expire*/
+	for (i = 0; i < ALARM_NUMTYPE; i++) {
+		struct alarm_base *base = &alarm_bases[i];
+		struct timerqueue_node *next;
+		ktime_t delta;
+
+		spin_lock_irqsave(&base->lock, flags);
+		next = timerqueue_getnext(&base->timerqueue);
+		spin_unlock_irqrestore(&base->lock, flags);
+		if (!next)
+			continue;
+		delta = ktime_sub(next->expires, base->gettime());
+		if (!min.tv64 || (delta.tv64 < min.tv64))
+			min = delta;
+	}
+	if (min.tv64 == 0)
+		return 0;
+
+	/* XXX - Should we enforce a minimum sleep time? */
+	WARN_ON(min.tv64 < NSEC_PER_SEC);
+
+	/* Setup an rtc timer to fire that far in the future */
+	rtc_timer_cancel(rtcdev, &rtctimer);
+	rtc_read_time(rtcdev, &tm);
+	now = rtc_tm_to_ktime(tm);
+	now = ktime_add(now, min);
+
+	rtc_timer_start(rtcdev, &rtctimer, now, ktime_set(0, 0));
+
+	return 0;
+}
+#else
+static int alarmtimer_suspend(struct device *dev)
+{
+	return 0;
+}
+#endif
+
+static void alarmtimer_freezerset(ktime_t absexp, enum alarmtimer_type type)
+{
+	ktime_t delta;
+	unsigned long flags;
+	struct alarm_base *base = &alarm_bases[type];
+
+	delta = ktime_sub(absexp, base->gettime());
+
+	spin_lock_irqsave(&freezer_delta_lock, flags);
+	if (!freezer_delta.tv64 || (delta.tv64 < freezer_delta.tv64))
+		freezer_delta = delta;
+	spin_unlock_irqrestore(&freezer_delta_lock, flags);
+}
+
+
+/**
+ * alarm_init - Initialize an alarm structure
+ * @alarm: ptr to alarm to be initialized
+ * @type: the type of the alarm
+ * @function: callback that is run when the alarm fires
+ */
+void alarm_init(struct alarm *alarm, enum alarmtimer_type type,
+		void (*function)(struct alarm *))
+{
+	timerqueue_init(&alarm->node);
+	alarm->period = ktime_set(0, 0);
+	alarm->function = function;
+	alarm->type = type;
+	alarm->enabled = 0;
+}
+
+/**
+ * alarm_start - Sets an alarm to fire
+ * @alarm: ptr to alarm to set
+ * @start: time to run the alarm
+ * @period: period at which the alarm will recur
+ */
+void alarm_start(struct alarm *alarm, ktime_t start, ktime_t period)
+{
+	struct alarm_base *base = &alarm_bases[alarm->type];
+	unsigned long flags;
+
+	spin_lock_irqsave(&base->lock, flags);
+	if (alarm->enabled)
+		alarmtimer_remove(base, alarm);
+	alarm->node.expires = start;
+	alarm->period = period;
+	alarmtimer_enqueue(base, alarm);
+	alarm->enabled = 1;
+	spin_unlock_irqrestore(&base->lock, flags);
+}
+
+/**
+ * alarm_cancel - Tries to cancel an alarm timer
+ * @alarm: ptr to alarm to be canceled
+ */
+void alarm_cancel(struct alarm *alarm)
+{
+	struct alarm_base *base = &alarm_bases[alarm->type];
+	unsigned long flags;
+
+	spin_lock_irqsave(&base->lock, flags);
+	if (alarm->enabled)
+		alarmtimer_remove(base, alarm);
+	alarm->enabled = 0;
+	spin_unlock_irqrestore(&base->lock, flags);
+}
+
+
+/**
+ * clock2alarm - helper that converts from clockid to alarmtypes
+ * @clockid: clockid.
+ */
+static enum alarmtimer_type clock2alarm(clockid_t clockid)
+{
+	if (clockid == CLOCK_REALTIME_ALARM)
+		return ALARM_REALTIME;
+	if (clockid == CLOCK_BOOTTIME_ALARM)
+		return ALARM_BOOTTIME;
+	return -1;
+}
+
+/**
+ * alarm_handle_timer - Callback for posix timers
+ * @alarm: alarm that fired
+ *
+ * Posix timer callback for expired alarm timers.
+ */
+static void alarm_handle_timer(struct alarm *alarm)
+{
+	struct k_itimer *ptr = container_of(alarm, struct k_itimer,
+						it.alarmtimer);
+	if (posix_timer_event(ptr, 0) != 0)
+		ptr->it_overrun++;
+}
+
+/**
+ * alarm_clock_getres - posix getres interface
+ * @which_clock: clockid
+ * @tp: timespec to fill
+ *
+ * Returns the granularity of underlying alarm base clock
+ */
+static int alarm_clock_getres(const clockid_t which_clock, struct timespec *tp)
+{
+	clockid_t baseid = alarm_bases[clock2alarm(which_clock)].base_clockid;
+
+	return hrtimer_get_res(baseid, tp);
+}
+
+/**
+ * alarm_clock_get - posix clock_get interface
+ * @which_clock: clockid
+ * @tp: timespec to fill.
+ *
+ * Provides the underlying alarm base time.
+ */
+static int alarm_clock_get(clockid_t which_clock, struct timespec *tp)
+{
+	struct alarm_base *base = &alarm_bases[clock2alarm(which_clock)];
+
+	*tp = ktime_to_timespec(base->gettime());
+	return 0;
+}
+
+/**
+ * alarm_timer_create - posix timer_create interface
+ * @new_timer: k_itimer pointer to manage
+ *
+ * Initializes the k_itimer structure.
+ */
+static int alarm_timer_create(struct k_itimer *new_timer)
+{
+	enum  alarmtimer_type type;
+	struct alarm_base *base;
+
+	if (!capable(CAP_WAKE_ALARM))
+		return -EPERM;
+
+	type = clock2alarm(new_timer->it_clock);
+	base = &alarm_bases[type];
+	alarm_init(&new_timer->it.alarmtimer, type, alarm_handle_timer);
+	return 0;
+}
+
+/**
+ * alarm_timer_get - posix timer_get interface
+ * @new_timer: k_itimer pointer
+ * @cur_setting: itimerspec data to fill
+ *
+ * Copies the itimerspec data out from the k_itimer
+ */
+static void alarm_timer_get(struct k_itimer *timr,
+				struct itimerspec *cur_setting)
+{
+	cur_setting->it_interval =
+			ktime_to_timespec(timr->it.alarmtimer.period);
+	cur_setting->it_value =
+			ktime_to_timespec(timr->it.alarmtimer.node.expires);
+	return;
+}
+
+/**
+ * alarm_timer_del - posix timer_del interface
+ * @timr: k_itimer pointer to be deleted
+ *
+ * Cancels any programmed alarms for the given timer.
+ */
+static int alarm_timer_del(struct k_itimer *timr)
+{
+	alarm_cancel(&timr->it.alarmtimer);
+	return 0;
+}
+
+/**
+ * alarm_timer_set - posix timer_set interface
+ * @timr: k_itimer pointer to be deleted
+ * @flags: timer flags
+ * @new_setting: itimerspec to be used
+ * @old_setting: itimerspec being replaced
+ *
+ * Sets the timer to new_setting, and starts the timer.
+ */
+static int alarm_timer_set(struct k_itimer *timr, int flags,
+				struct itimerspec *new_setting,
+				struct itimerspec *old_setting)
+{
+	/* Save old values */
+	old_setting->it_interval =
+			ktime_to_timespec(timr->it.alarmtimer.period);
+	old_setting->it_value =
+			ktime_to_timespec(timr->it.alarmtimer.node.expires);
+
+	/* If the timer was already set, cancel it */
+	alarm_cancel(&timr->it.alarmtimer);
+
+	/* start the timer */
+	alarm_start(&timr->it.alarmtimer,
+			timespec_to_ktime(new_setting->it_value),
+			timespec_to_ktime(new_setting->it_interval));
+	return 0;
+}
+
+/**
+ * alarmtimer_nsleep_wakeup - Wakeup function for alarm_timer_nsleep
+ * @alarm: ptr to alarm that fired
+ *
+ * Wakes up the task that set the alarmtimer
+ */
+static void alarmtimer_nsleep_wakeup(struct alarm *alarm)
+{
+	struct task_struct *task = (struct task_struct *)alarm->data;
+
+	alarm->data = NULL;
+	if (task)
+		wake_up_process(task);
+}
+
+/**
+ * alarmtimer_do_nsleep - Internal alarmtimer nsleep implementation
+ * @alarm: ptr to alarmtimer
+ * @absexp: absolute expiration time
+ *
+ * Sets the alarm timer and sleeps until it is fired or interrupted.
+ */
+static int alarmtimer_do_nsleep(struct alarm *alarm, ktime_t absexp)
+{
+	alarm->data = (void *)current;
+	do {
+		set_current_state(TASK_INTERRUPTIBLE);
+		alarm_start(alarm, absexp, ktime_set(0, 0));
+		if (likely(alarm->data))
+			schedule();
+
+		alarm_cancel(alarm);
+	} while (alarm->data && !signal_pending(current));
+
+	__set_current_state(TASK_RUNNING);
+
+	return (alarm->data == NULL);
+}
+
+
+/**
+ * update_rmtp - Update remaining timespec value
+ * @exp: expiration time
+ * @type: timer type
+ * @rmtp: user pointer to remaining timepsec value
+ *
+ * Helper function that fills in rmtp value with time between
+ * now and the exp value
+ */
+static int update_rmtp(ktime_t exp, enum  alarmtimer_type type,
+			struct timespec __user *rmtp)
+{
+	struct timespec rmt;
+	ktime_t rem;
+
+	rem = ktime_sub(exp, alarm_bases[type].gettime());
+
+	if (rem.tv64 <= 0)
+		return 0;
+	rmt = ktime_to_timespec(rem);
+
+	if (copy_to_user(rmtp, &rmt, sizeof(*rmtp)))
+		return -EFAULT;
+
+	return 1;
+
+}
+
+/**
+ * alarm_timer_nsleep_restart - restartblock alarmtimer nsleep
+ * @restart: ptr to restart block
+ *
+ * Handles restarted clock_nanosleep calls
+ */
+static long __sched alarm_timer_nsleep_restart(struct restart_block *restart)
+{
+	enum  alarmtimer_type type = restart->nanosleep.index;
+	ktime_t exp;
+	struct timespec __user  *rmtp;
+	struct alarm alarm;
+	int ret = 0;
+
+	exp.tv64 = restart->nanosleep.expires;
+	alarm_init(&alarm, type, alarmtimer_nsleep_wakeup);
+
+	if (alarmtimer_do_nsleep(&alarm, exp))
+		goto out;
+
+	if (freezing(current))
+		alarmtimer_freezerset(exp, type);
+
+	rmtp = restart->nanosleep.rmtp;
+	if (rmtp) {
+		ret = update_rmtp(exp, type, rmtp);
+		if (ret <= 0)
+			goto out;
+	}
+
+
+	/* The other values in restart are already filled in */
+	ret = -ERESTART_RESTARTBLOCK;
+out:
+	return ret;
+}
+
+/**
+ * alarm_timer_nsleep - alarmtimer nanosleep
+ * @which_clock: clockid
+ * @flags: determins abstime or relative
+ * @tsreq: requested sleep time (abs or rel)
+ * @rmtp: remaining sleep time saved
+ *
+ * Handles clock_nanosleep calls against _ALARM clockids
+ */
+static int alarm_timer_nsleep(const clockid_t which_clock, int flags,
+		     struct timespec *tsreq, struct timespec __user *rmtp)
+{
+	enum  alarmtimer_type type = clock2alarm(which_clock);
+	struct alarm alarm;
+	ktime_t exp;
+	int ret = 0;
+	struct restart_block *restart;
+
+	if (!capable(CAP_WAKE_ALARM))
+		return -EPERM;
+
+	alarm_init(&alarm, type, alarmtimer_nsleep_wakeup);
+
+	exp = timespec_to_ktime(*tsreq);
+	/* Convert (if necessary) to absolute time */
+	if (flags != TIMER_ABSTIME) {
+		ktime_t now = alarm_bases[type].gettime();
+		exp = ktime_add(now, exp);
+	}
+
+	if (alarmtimer_do_nsleep(&alarm, exp))
+		goto out;
+
+	if (freezing(current))
+		alarmtimer_freezerset(exp, type);
+
+	/* abs timers don't set remaining time or restart */
+	if (flags == TIMER_ABSTIME) {
+		ret = -ERESTARTNOHAND;
+		goto out;
+	}
+
+	if (rmtp) {
+		ret = update_rmtp(exp, type, rmtp);
+		if (ret <= 0)
+			goto out;
+	}
+
+	restart = &current_thread_info()->restart_block;
+	restart->fn = alarm_timer_nsleep_restart;
+	restart->nanosleep.index = type;
+	restart->nanosleep.expires = exp.tv64;
+	restart->nanosleep.rmtp = rmtp;
+	ret = -ERESTART_RESTARTBLOCK;
+
+out:
+	return ret;
+}
+
+
+/* Suspend hook structures */
+static const struct dev_pm_ops alarmtimer_pm_ops = {
+	.suspend = alarmtimer_suspend,
+};
+
+static struct platform_driver alarmtimer_driver = {
+	.driver = {
+		.name = "alarmtimer",
+		.pm = &alarmtimer_pm_ops,
+	}
+};
+
+/**
+ * alarmtimer_init - Initialize alarm timer code
+ *
+ * This function initializes the alarm bases and registers
+ * the posix clock ids.
+ */
+static int __init alarmtimer_init(void)
+{
+	int error = 0;
+	int i;
+	struct k_clock alarm_clock = {
+		.clock_getres	= alarm_clock_getres,
+		.clock_get	= alarm_clock_get,
+		.timer_create	= alarm_timer_create,
+		.timer_set	= alarm_timer_set,
+		.timer_del	= alarm_timer_del,
+		.timer_get	= alarm_timer_get,
+		.nsleep		= alarm_timer_nsleep,
+	};
+
+	posix_timers_register_clock(CLOCK_REALTIME_ALARM, &alarm_clock);
+	posix_timers_register_clock(CLOCK_BOOTTIME_ALARM, &alarm_clock);
+
+	/* Initialize alarm bases */
+	alarm_bases[ALARM_REALTIME].base_clockid = CLOCK_REALTIME;
+	alarm_bases[ALARM_REALTIME].gettime = &ktime_get_real;
+	alarm_bases[ALARM_BOOTTIME].base_clockid = CLOCK_BOOTTIME;
+	alarm_bases[ALARM_BOOTTIME].gettime = &ktime_get_boottime;
+	for (i = 0; i < ALARM_NUMTYPE; i++) {
+		timerqueue_init_head(&alarm_bases[i].timerqueue);
+		spin_lock_init(&alarm_bases[i].lock);
+		hrtimer_init(&alarm_bases[i].timer,
+				alarm_bases[i].base_clockid,
+				HRTIMER_MODE_ABS);
+		alarm_bases[i].timer.function = alarmtimer_fired;
+	}
+	error = platform_driver_register(&alarmtimer_driver);
+	platform_device_register_simple("alarmtimer", -1, NULL, 0);
+
+	return error;
+}
+device_initcall(alarmtimer_init);
+
+#ifdef CONFIG_RTC_CLASS
+/**
+ * has_wakealarm - check rtc device has wakealarm ability
+ * @dev: current device
+ * @name_ptr: name to be returned
+ *
+ * This helper function checks to see if the rtc device can wake
+ * from suspend.
+ */
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+	struct rtc_device *candidate = to_rtc_device(dev);
+
+	if (!candidate->ops->set_alarm)
+		return 0;
+	if (!device_may_wakeup(candidate->dev.parent))
+		return 0;
+
+	*(const char **)name_ptr = dev_name(dev);
+	return 1;
+}
+
+/**
+ * alarmtimer_init_late - Late initializing of alarmtimer code
+ *
+ * This function locates a rtc device to use for wakealarms.
+ * Run as late_initcall to make sure rtc devices have been
+ * registered.
+ */
+static int __init alarmtimer_init_late(void)
+{
+	char *str;
+
+	/* Find an rtc device and init the rtc_timer */
+	class_find_device(rtc_class, NULL, &str, has_wakealarm);
+	if (str)
+		rtcdev = rtc_class_open(str);
+	if (!rtcdev) {
+		printk(KERN_WARNING "No RTC device found, ALARM timers will"
+			" not wake from suspend");
+	}
+	rtc_timer_init(&rtctimer, NULL, NULL);
+
+	return 0;
+}
+#else
+static int __init alarmtimer_init_late(void)
+{
+	printk(KERN_WARNING "Kernel not built with RTC support, ALARM timers"
+		" will not wake from suspend");
+	return 0;
+}
+#endif
+late_initcall(alarmtimer_init_late);
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 0d74b9ba90c..c027d4f602f 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -194,6 +194,70 @@ void clockevents_register_device(struct clock_event_device *dev)
 }
 EXPORT_SYMBOL_GPL(clockevents_register_device);
 
+static void clockevents_config(struct clock_event_device *dev,
+			       u32 freq)
+{
+	u64 sec;
+
+	if (!(dev->features & CLOCK_EVT_FEAT_ONESHOT))
+		return;
+
+	/*
+	 * Calculate the maximum number of seconds we can sleep. Limit
+	 * to 10 minutes for hardware which can program more than
+	 * 32bit ticks so we still get reasonable conversion values.
+	 */
+	sec = dev->max_delta_ticks;
+	do_div(sec, freq);
+	if (!sec)
+		sec = 1;
+	else if (sec > 600 && dev->max_delta_ticks > UINT_MAX)
+		sec = 600;
+
+	clockevents_calc_mult_shift(dev, freq, sec);
+	dev->min_delta_ns = clockevent_delta2ns(dev->min_delta_ticks, dev);
+	dev->max_delta_ns = clockevent_delta2ns(dev->max_delta_ticks, dev);
+}
+
+/**
+ * clockevents_config_and_register - Configure and register a clock event device
+ * @dev:	device to register
+ * @freq:	The clock frequency
+ * @min_delta:	The minimum clock ticks to program in oneshot mode
+ * @max_delta:	The maximum clock ticks to program in oneshot mode
+ *
+ * min/max_delta can be 0 for devices which do not support oneshot mode.
+ */
+void clockevents_config_and_register(struct clock_event_device *dev,
+				     u32 freq, unsigned long min_delta,
+				     unsigned long max_delta)
+{
+	dev->min_delta_ticks = min_delta;
+	dev->max_delta_ticks = max_delta;
+	clockevents_config(dev, freq);
+	clockevents_register_device(dev);
+}
+
+/**
+ * clockevents_update_freq - Update frequency and reprogram a clock event device.
+ * @dev:	device to modify
+ * @freq:	new device frequency
+ *
+ * Reconfigure and reprogram a clock event device in oneshot
+ * mode. Must be called on the cpu for which the device delivers per
+ * cpu timer events with interrupts disabled!  Returns 0 on success,
+ * -ETIME when the event is in the past.
+ */
+int clockevents_update_freq(struct clock_event_device *dev, u32 freq)
+{
+	clockevents_config(dev, freq);
+
+	if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
+		return 0;
+
+	return clockevents_program_event(dev, dev->next_event, ktime_get());
+}
+
 /*
  * Noop handler when we shut down an event device
  */
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 6519cf62d9c..1c95fd67732 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -626,19 +626,6 @@ static void clocksource_enqueue(struct clocksource *cs)
 	list_add(&cs->list, entry);
 }
 
-
-/*
- * Maximum time we expect to go between ticks. This includes idle
- * tickless time. It provides the trade off between selecting a
- * mult/shift pair that is very precise but can only handle a short
- * period of time, vs. a mult/shift pair that can handle long periods
- * of time but isn't as precise.
- *
- * This is a subsystem constant, and actual hardware limitations
- * may override it (ie: clocksources that wrap every 3 seconds).
- */
-#define MAX_UPDATE_LENGTH 5 /* Seconds */
-
 /**
  * __clocksource_updatefreq_scale - Used update clocksource with new freq
  * @t:		clocksource to be registered
@@ -652,15 +639,28 @@ static void clocksource_enqueue(struct clocksource *cs)
  */
 void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
 {
+	u64 sec;
+
 	/*
-	 * Ideally we want to use  some of the limits used in
-	 * clocksource_max_deferment, to provide a more informed
-	 * MAX_UPDATE_LENGTH. But for now this just gets the
-	 * register interface working properly.
+	 * Calc the maximum number of seconds which we can run before
+	 * wrapping around. For clocksources which have a mask > 32bit
+	 * we need to limit the max sleep time to have a good
+	 * conversion precision. 10 minutes is still a reasonable
+	 * amount. That results in a shift value of 24 for a
+	 * clocksource with mask >= 40bit and f >= 4GHz. That maps to
+	 * ~ 0.06ppm granularity for NTP. We apply the same 12.5%
+	 * margin as we do in clocksource_max_deferment()
 	 */
+	sec = (cs->mask - (cs->mask >> 5));
+	do_div(sec, freq);
+	do_div(sec, scale);
+	if (!sec)
+		sec = 1;
+	else if (sec > 600 && cs->mask > UINT_MAX)
+		sec = 600;
+
 	clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
-				      NSEC_PER_SEC/scale,
-				      MAX_UPDATE_LENGTH*scale);
+			       NSEC_PER_SEC / scale, sec * scale);
 	cs->max_idle_ns = clocksource_max_deferment(cs);
 }
 EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
@@ -685,8 +685,8 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
 	/* Add clocksource to the clcoksource list */
 	mutex_lock(&clocksource_mutex);
 	clocksource_enqueue(cs);
-	clocksource_select();
 	clocksource_enqueue_watchdog(cs);
+	clocksource_select();
 	mutex_unlock(&clocksource_mutex);
 	return 0;
 }
@@ -706,8 +706,8 @@ int clocksource_register(struct clocksource *cs)
 
 	mutex_lock(&clocksource_mutex);
 	clocksource_enqueue(cs);
-	clocksource_select();
 	clocksource_enqueue_watchdog(cs);
+	clocksource_select();
 	mutex_unlock(&clocksource_mutex);
 	return 0;
 }
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index b2fa506667c..a470154e040 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -34,7 +34,7 @@
  * inaccuracies caused by missed or lost timer
  * interrupts and the inability for the timer
  * interrupt hardware to accuratly tick at the
- * requested HZ value. It is also not reccomended
+ * requested HZ value. It is also not recommended
  * for "tick-less" systems.
  */
 #define NSEC_PER_JIFFY	((u32)((((u64)NSEC_PER_SEC)<<8)/ACTHZ))
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 5f1bb8e2008..f6117a4c7cb 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -652,6 +652,8 @@ int do_adjtimex(struct timex *txc)
 		struct timespec delta;
 		delta.tv_sec  = txc->time.tv_sec;
 		delta.tv_nsec = txc->time.tv_usec;
+		if (!capable(CAP_SYS_TIME))
+			return -EPERM;
 		if (!(txc->modes & ADJ_NANO))
 			delta.tv_nsec *= 1000;
 		result = timekeeping_inject_offset(&delta);
diff --git a/kernel/time/posix-clock.c b/kernel/time/posix-clock.c
index 25028dd4fa1..c340ca658f3 100644
--- a/kernel/time/posix-clock.c
+++ b/kernel/time/posix-clock.c
@@ -19,7 +19,6 @@
  */
 #include <linux/device.h>
 #include <linux/file.h>
-#include <linux/mutex.h>
 #include <linux/posix-clock.h>
 #include <linux/slab.h>
 #include <linux/syscalls.h>
@@ -34,19 +33,19 @@ static struct posix_clock *get_posix_clock(struct file *fp)
 {
 	struct posix_clock *clk = fp->private_data;
 
-	mutex_lock(&clk->mutex);
+	down_read(&clk->rwsem);
 
 	if (!clk->zombie)
 		return clk;
 
-	mutex_unlock(&clk->mutex);
+	up_read(&clk->rwsem);
 
 	return NULL;
 }
 
 static void put_posix_clock(struct posix_clock *clk)
 {
-	mutex_unlock(&clk->mutex);
+	up_read(&clk->rwsem);
 }
 
 static ssize_t posix_clock_read(struct file *fp, char __user *buf,
@@ -156,7 +155,7 @@ static int posix_clock_open(struct inode *inode, struct file *fp)
 	struct posix_clock *clk =
 		container_of(inode->i_cdev, struct posix_clock, cdev);
 
-	mutex_lock(&clk->mutex);
+	down_read(&clk->rwsem);
 
 	if (clk->zombie) {
 		err = -ENODEV;
@@ -172,7 +171,7 @@ static int posix_clock_open(struct inode *inode, struct file *fp)
 		fp->private_data = clk;
 	}
 out:
-	mutex_unlock(&clk->mutex);
+	up_read(&clk->rwsem);
 	return err;
 }
 
@@ -211,25 +210,20 @@ int posix_clock_register(struct posix_clock *clk, dev_t devid)
 	int err;
 
 	kref_init(&clk->kref);
-	mutex_init(&clk->mutex);
+	init_rwsem(&clk->rwsem);
 
 	cdev_init(&clk->cdev, &posix_clock_file_operations);
 	clk->cdev.owner = clk->ops.owner;
 	err = cdev_add(&clk->cdev, devid, 1);
-	if (err)
-		goto no_cdev;
 
 	return err;
-no_cdev:
-	mutex_destroy(&clk->mutex);
-	return err;
 }
 EXPORT_SYMBOL_GPL(posix_clock_register);
 
 static void delete_clock(struct kref *kref)
 {
 	struct posix_clock *clk = container_of(kref, struct posix_clock, kref);
-	mutex_destroy(&clk->mutex);
+
 	if (clk->release)
 		clk->release(clk);
 }
@@ -238,9 +232,9 @@ void posix_clock_unregister(struct posix_clock *clk)
 {
 	cdev_del(&clk->cdev);
 
-	mutex_lock(&clk->mutex);
+	down_write(&clk->rwsem);
 	clk->zombie = true;
-	mutex_unlock(&clk->mutex);
+	up_write(&clk->rwsem);
 
 	kref_put(&clk->kref, delete_clock);
 }
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index da800ffa810..723c7637e55 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -522,10 +522,11 @@ static void tick_broadcast_init_next_event(struct cpumask *mask,
  */
 void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 {
+	int cpu = smp_processor_id();
+
 	/* Set it up only once ! */
 	if (bc->event_handler != tick_handle_oneshot_broadcast) {
 		int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC;
-		int cpu = smp_processor_id();
 
 		bc->event_handler = tick_handle_oneshot_broadcast;
 		clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
@@ -551,6 +552,15 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 			tick_broadcast_set_event(tick_next_period, 1);
 		} else
 			bc->next_event.tv64 = KTIME_MAX;
+	} else {
+		/*
+		 * The first cpu which switches to oneshot mode sets
+		 * the bit for all other cpus which are in the general
+		 * (periodic) broadcast mask. So the bit is set and
+		 * would prevent the first broadcast enter after this
+		 * to program the bc device.
+		 */
+		tick_broadcast_clear_oneshot(cpu);
 	}
 }
 
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 8ad5d576755..8e6a05a5915 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -596,6 +596,58 @@ void __init timekeeping_init(void)
 static struct timespec timekeeping_suspend_time;
 
 /**
+ * __timekeeping_inject_sleeptime - Internal function to add sleep interval
+ * @delta: pointer to a timespec delta value
+ *
+ * Takes a timespec offset measuring a suspend interval and properly
+ * adds the sleep offset to the timekeeping variables.
+ */
+static void __timekeeping_inject_sleeptime(struct timespec *delta)
+{
+	xtime = timespec_add(xtime, *delta);
+	wall_to_monotonic = timespec_sub(wall_to_monotonic, *delta);
+	total_sleep_time = timespec_add(total_sleep_time, *delta);
+}
+
+
+/**
+ * timekeeping_inject_sleeptime - Adds suspend interval to timeekeeping values
+ * @delta: pointer to a timespec delta value
+ *
+ * This hook is for architectures that cannot support read_persistent_clock
+ * because their RTC/persistent clock is only accessible when irqs are enabled.
+ *
+ * This function should only be called by rtc_resume(), and allows
+ * a suspend offset to be injected into the timekeeping values.
+ */
+void timekeeping_inject_sleeptime(struct timespec *delta)
+{
+	unsigned long flags;
+	struct timespec ts;
+
+	/* Make sure we don't set the clock twice */
+	read_persistent_clock(&ts);
+	if (!(ts.tv_sec == 0 && ts.tv_nsec == 0))
+		return;
+
+	write_seqlock_irqsave(&xtime_lock, flags);
+	timekeeping_forward_now();
+
+	__timekeeping_inject_sleeptime(delta);
+
+	timekeeper.ntp_error = 0;
+	ntp_clear();
+	update_vsyscall(&xtime, &wall_to_monotonic, timekeeper.clock,
+				timekeeper.mult);
+
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+
+	/* signal hrtimers about time change */
+	clock_was_set();
+}
+
+
+/**
  * timekeeping_resume - Resumes the generic timekeeping subsystem.
  *
  * This is for the generic clocksource timekeeping.
@@ -615,9 +667,7 @@ static void timekeeping_resume(void)
 
 	if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) {
 		ts = timespec_sub(ts, timekeeping_suspend_time);
-		xtime = timespec_add(xtime, ts);
-		wall_to_monotonic = timespec_sub(wall_to_monotonic, ts);
-		total_sleep_time = timespec_add(total_sleep_time, ts);
+		__timekeeping_inject_sleeptime(&ts);
 	}
 	/* re-base the last cycle value */
 	timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c
index 2f3b585b8d7..a5d0a3a85dd 100644
--- a/kernel/time/timer_stats.c
+++ b/kernel/time/timer_stats.c
@@ -236,7 +236,7 @@ void timer_stats_update_stats(void *timer, pid_t pid, void *startf,
 			      unsigned int timer_flag)
 {
 	/*
-	 * It doesnt matter which lock we take:
+	 * It doesn't matter which lock we take:
 	 */
 	raw_spinlock_t *lock;
 	struct entry *entry, input;
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 61d7d59f4a1..2ad39e556cb 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -141,7 +141,7 @@ if FTRACE
 config FUNCTION_TRACER
 	bool "Kernel Function Tracer"
 	depends on HAVE_FUNCTION_TRACER
-	select FRAME_POINTER if !ARM_UNWIND && !S390
+	select FRAME_POINTER if !ARM_UNWIND && !S390 && !MICROBLAZE
 	select KALLSYMS
 	select GENERIC_TRACER
 	select CONTEXT_SWITCH_TRACER
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 7aa40f8e182..6957aa298df 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -850,29 +850,21 @@ static void blk_add_trace_plug(void *ignore, struct request_queue *q)
 		__blk_add_trace(bt, 0, 0, 0, BLK_TA_PLUG, 0, 0, NULL);
 }
 
-static void blk_add_trace_unplug_io(void *ignore, struct request_queue *q)
+static void blk_add_trace_unplug(void *ignore, struct request_queue *q,
+				    unsigned int depth, bool explicit)
 {
 	struct blk_trace *bt = q->blk_trace;
 
 	if (bt) {
-		unsigned int pdu = q->rq.count[READ] + q->rq.count[WRITE];
-		__be64 rpdu = cpu_to_be64(pdu);
+		__be64 rpdu = cpu_to_be64(depth);
+		u32 what;
 
-		__blk_add_trace(bt, 0, 0, 0, BLK_TA_UNPLUG_IO, 0,
-				sizeof(rpdu), &rpdu);
-	}
-}
-
-static void blk_add_trace_unplug_timer(void *ignore, struct request_queue *q)
-{
-	struct blk_trace *bt = q->blk_trace;
-
-	if (bt) {
-		unsigned int pdu = q->rq.count[READ] + q->rq.count[WRITE];
-		__be64 rpdu = cpu_to_be64(pdu);
+		if (explicit)
+			what = BLK_TA_UNPLUG_IO;
+		else
+			what = BLK_TA_UNPLUG_TIMER;
 
-		__blk_add_trace(bt, 0, 0, 0, BLK_TA_UNPLUG_TIMER, 0,
-				sizeof(rpdu), &rpdu);
+		__blk_add_trace(bt, 0, 0, 0, what, 0, sizeof(rpdu), &rpdu);
 	}
 }
 
@@ -1015,9 +1007,7 @@ static void blk_register_tracepoints(void)
 	WARN_ON(ret);
 	ret = register_trace_block_plug(blk_add_trace_plug, NULL);
 	WARN_ON(ret);
-	ret = register_trace_block_unplug_timer(blk_add_trace_unplug_timer, NULL);
-	WARN_ON(ret);
-	ret = register_trace_block_unplug_io(blk_add_trace_unplug_io, NULL);
+	ret = register_trace_block_unplug(blk_add_trace_unplug, NULL);
 	WARN_ON(ret);
 	ret = register_trace_block_split(blk_add_trace_split, NULL);
 	WARN_ON(ret);
@@ -1032,8 +1022,7 @@ static void blk_unregister_tracepoints(void)
 	unregister_trace_block_rq_remap(blk_add_trace_rq_remap, NULL);
 	unregister_trace_block_bio_remap(blk_add_trace_bio_remap, NULL);
 	unregister_trace_block_split(blk_add_trace_split, NULL);
-	unregister_trace_block_unplug_io(blk_add_trace_unplug_io, NULL);
-	unregister_trace_block_unplug_timer(blk_add_trace_unplug_timer, NULL);
+	unregister_trace_block_unplug(blk_add_trace_unplug, NULL);
 	unregister_trace_block_plug(blk_add_trace_plug, NULL);
 	unregister_trace_block_sleeprq(blk_add_trace_sleeprq, NULL);
 	unregister_trace_block_getrq(blk_add_trace_getrq, NULL);
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index c075f4ea6b9..d017c2c82c4 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -39,20 +39,26 @@
 #include "trace_stat.h"
 
 #define FTRACE_WARN_ON(cond)			\
-	do {					\
-		if (WARN_ON(cond))		\
+	({					\
+		int ___r = cond;		\
+		if (WARN_ON(___r))		\
 			ftrace_kill();		\
-	} while (0)
+		___r;				\
+	})
 
 #define FTRACE_WARN_ON_ONCE(cond)		\
-	do {					\
-		if (WARN_ON_ONCE(cond))		\
+	({					\
+		int ___r = cond;		\
+		if (WARN_ON_ONCE(___r))		\
 			ftrace_kill();		\
-	} while (0)
+		___r;				\
+	})
 
 /* hash bits for specific function selection */
 #define FTRACE_HASH_BITS 7
 #define FTRACE_FUNC_HASHSIZE (1 << FTRACE_HASH_BITS)
+#define FTRACE_HASH_DEFAULT_BITS 10
+#define FTRACE_HASH_MAX_BITS 12
 
 /* ftrace_enabled is a method to turn ftrace on or off */
 int ftrace_enabled __read_mostly;
@@ -81,23 +87,29 @@ static struct ftrace_ops ftrace_list_end __read_mostly =
 	.func		= ftrace_stub,
 };
 
-static struct ftrace_ops *ftrace_list __read_mostly = &ftrace_list_end;
+static struct ftrace_ops *ftrace_global_list __read_mostly = &ftrace_list_end;
+static struct ftrace_ops *ftrace_ops_list __read_mostly = &ftrace_list_end;
 ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub;
 ftrace_func_t __ftrace_trace_function __read_mostly = ftrace_stub;
 ftrace_func_t ftrace_pid_function __read_mostly = ftrace_stub;
+static struct ftrace_ops global_ops;
+
+static void
+ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip);
 
 /*
- * Traverse the ftrace_list, invoking all entries.  The reason that we
+ * Traverse the ftrace_global_list, invoking all entries.  The reason that we
  * can use rcu_dereference_raw() is that elements removed from this list
  * are simply leaked, so there is no need to interact with a grace-period
  * mechanism.  The rcu_dereference_raw() calls are needed to handle
- * concurrent insertions into the ftrace_list.
+ * concurrent insertions into the ftrace_global_list.
  *
  * Silly Alpha and silly pointer-speculation compiler optimizations!
  */
-static void ftrace_list_func(unsigned long ip, unsigned long parent_ip)
+static void ftrace_global_list_func(unsigned long ip,
+				    unsigned long parent_ip)
 {
-	struct ftrace_ops *op = rcu_dereference_raw(ftrace_list); /*see above*/
+	struct ftrace_ops *op = rcu_dereference_raw(ftrace_global_list); /*see above*/
 
 	while (op != &ftrace_list_end) {
 		op->func(ip, parent_ip);
@@ -147,46 +159,69 @@ static void ftrace_test_stop_func(unsigned long ip, unsigned long parent_ip)
 }
 #endif
 
-static int __register_ftrace_function(struct ftrace_ops *ops)
+static void update_global_ops(void)
 {
-	ops->next = ftrace_list;
+	ftrace_func_t func;
+
 	/*
-	 * We are entering ops into the ftrace_list but another
-	 * CPU might be walking that list. We need to make sure
-	 * the ops->next pointer is valid before another CPU sees
-	 * the ops pointer included into the ftrace_list.
+	 * If there's only one function registered, then call that
+	 * function directly. Otherwise, we need to iterate over the
+	 * registered callers.
 	 */
-	rcu_assign_pointer(ftrace_list, ops);
+	if (ftrace_global_list == &ftrace_list_end ||
+	    ftrace_global_list->next == &ftrace_list_end)
+		func = ftrace_global_list->func;
+	else
+		func = ftrace_global_list_func;
 
-	if (ftrace_enabled) {
-		ftrace_func_t func;
+	/* If we filter on pids, update to use the pid function */
+	if (!list_empty(&ftrace_pids)) {
+		set_ftrace_pid_function(func);
+		func = ftrace_pid_func;
+	}
 
-		if (ops->next == &ftrace_list_end)
-			func = ops->func;
-		else
-			func = ftrace_list_func;
+	global_ops.func = func;
+}
 
-		if (!list_empty(&ftrace_pids)) {
-			set_ftrace_pid_function(func);
-			func = ftrace_pid_func;
-		}
+static void update_ftrace_function(void)
+{
+	ftrace_func_t func;
+
+	update_global_ops();
+
+	/*
+	 * If we are at the end of the list and this ops is
+	 * not dynamic, then have the mcount trampoline call
+	 * the function directly
+	 */
+	if (ftrace_ops_list == &ftrace_list_end ||
+	    (ftrace_ops_list->next == &ftrace_list_end &&
+	     !(ftrace_ops_list->flags & FTRACE_OPS_FL_DYNAMIC)))
+		func = ftrace_ops_list->func;
+	else
+		func = ftrace_ops_list_func;
 
-		/*
-		 * For one func, simply call it directly.
-		 * For more than one func, call the chain.
-		 */
 #ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
-		ftrace_trace_function = func;
+	ftrace_trace_function = func;
 #else
-		__ftrace_trace_function = func;
-		ftrace_trace_function = ftrace_test_stop_func;
+	__ftrace_trace_function = func;
+	ftrace_trace_function = ftrace_test_stop_func;
 #endif
-	}
+}
 
-	return 0;
+static void add_ftrace_ops(struct ftrace_ops **list, struct ftrace_ops *ops)
+{
+	ops->next = *list;
+	/*
+	 * We are entering ops into the list but another
+	 * CPU might be walking that list. We need to make sure
+	 * the ops->next pointer is valid before another CPU sees
+	 * the ops pointer included into the list.
+	 */
+	rcu_assign_pointer(*list, ops);
 }
 
-static int __unregister_ftrace_function(struct ftrace_ops *ops)
+static int remove_ftrace_ops(struct ftrace_ops **list, struct ftrace_ops *ops)
 {
 	struct ftrace_ops **p;
 
@@ -194,13 +229,12 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops)
 	 * If we are removing the last function, then simply point
 	 * to the ftrace_stub.
 	 */
-	if (ftrace_list == ops && ops->next == &ftrace_list_end) {
-		ftrace_trace_function = ftrace_stub;
-		ftrace_list = &ftrace_list_end;
+	if (*list == ops && ops->next == &ftrace_list_end) {
+		*list = &ftrace_list_end;
 		return 0;
 	}
 
-	for (p = &ftrace_list; *p != &ftrace_list_end; p = &(*p)->next)
+	for (p = list; *p != &ftrace_list_end; p = &(*p)->next)
 		if (*p == ops)
 			break;
 
@@ -208,53 +242,83 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops)
 		return -1;
 
 	*p = (*p)->next;
+	return 0;
+}
 
-	if (ftrace_enabled) {
-		/* If we only have one func left, then call that directly */
-		if (ftrace_list->next == &ftrace_list_end) {
-			ftrace_func_t func = ftrace_list->func;
+static int __register_ftrace_function(struct ftrace_ops *ops)
+{
+	if (ftrace_disabled)
+		return -ENODEV;
 
-			if (!list_empty(&ftrace_pids)) {
-				set_ftrace_pid_function(func);
-				func = ftrace_pid_func;
-			}
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
-			ftrace_trace_function = func;
-#else
-			__ftrace_trace_function = func;
-#endif
-		}
-	}
+	if (FTRACE_WARN_ON(ops == &global_ops))
+		return -EINVAL;
+
+	if (WARN_ON(ops->flags & FTRACE_OPS_FL_ENABLED))
+		return -EBUSY;
+
+	if (!core_kernel_data((unsigned long)ops))
+		ops->flags |= FTRACE_OPS_FL_DYNAMIC;
+
+	if (ops->flags & FTRACE_OPS_FL_GLOBAL) {
+		int first = ftrace_global_list == &ftrace_list_end;
+		add_ftrace_ops(&ftrace_global_list, ops);
+		ops->flags |= FTRACE_OPS_FL_ENABLED;
+		if (first)
+			add_ftrace_ops(&ftrace_ops_list, &global_ops);
+	} else
+		add_ftrace_ops(&ftrace_ops_list, ops);
+
+	if (ftrace_enabled)
+		update_ftrace_function();
 
 	return 0;
 }
 
-static void ftrace_update_pid_func(void)
+static int __unregister_ftrace_function(struct ftrace_ops *ops)
 {
-	ftrace_func_t func;
+	int ret;
 
-	if (ftrace_trace_function == ftrace_stub)
-		return;
+	if (ftrace_disabled)
+		return -ENODEV;
 
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	func = ftrace_trace_function;
-#else
-	func = __ftrace_trace_function;
-#endif
+	if (WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED)))
+		return -EBUSY;
 
-	if (!list_empty(&ftrace_pids)) {
-		set_ftrace_pid_function(func);
-		func = ftrace_pid_func;
-	} else {
-		if (func == ftrace_pid_func)
-			func = ftrace_pid_function;
-	}
+	if (FTRACE_WARN_ON(ops == &global_ops))
+		return -EINVAL;
 
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	ftrace_trace_function = func;
-#else
-	__ftrace_trace_function = func;
-#endif
+	if (ops->flags & FTRACE_OPS_FL_GLOBAL) {
+		ret = remove_ftrace_ops(&ftrace_global_list, ops);
+		if (!ret && ftrace_global_list == &ftrace_list_end)
+			ret = remove_ftrace_ops(&ftrace_ops_list, &global_ops);
+		if (!ret)
+			ops->flags &= ~FTRACE_OPS_FL_ENABLED;
+	} else
+		ret = remove_ftrace_ops(&ftrace_ops_list, ops);
+
+	if (ret < 0)
+		return ret;
+
+	if (ftrace_enabled)
+		update_ftrace_function();
+
+	/*
+	 * Dynamic ops may be freed, we must make sure that all
+	 * callers are done before leaving this function.
+	 */
+	if (ops->flags & FTRACE_OPS_FL_DYNAMIC)
+		synchronize_sched();
+
+	return 0;
+}
+
+static void ftrace_update_pid_func(void)
+{
+	/* Only do something if we are tracing something */
+	if (ftrace_trace_function == ftrace_stub)
+		return;
+
+	update_ftrace_function();
 }
 
 #ifdef CONFIG_FUNCTION_PROFILER
@@ -888,8 +952,35 @@ enum {
 	FTRACE_START_FUNC_RET		= (1 << 3),
 	FTRACE_STOP_FUNC_RET		= (1 << 4),
 };
+struct ftrace_func_entry {
+	struct hlist_node hlist;
+	unsigned long ip;
+};
 
-static int ftrace_filtered;
+struct ftrace_hash {
+	unsigned long		size_bits;
+	struct hlist_head	*buckets;
+	unsigned long		count;
+	struct rcu_head		rcu;
+};
+
+/*
+ * We make these constant because no one should touch them,
+ * but they are used as the default "empty hash", to avoid allocating
+ * it all the time. These are in a read only section such that if
+ * anyone does try to modify it, it will cause an exception.
+ */
+static const struct hlist_head empty_buckets[1];
+static const struct ftrace_hash empty_hash = {
+	.buckets = (struct hlist_head *)empty_buckets,
+};
+#define EMPTY_HASH	((struct ftrace_hash *)&empty_hash)
+
+static struct ftrace_ops global_ops = {
+	.func			= ftrace_stub,
+	.notrace_hash		= EMPTY_HASH,
+	.filter_hash		= EMPTY_HASH,
+};
 
 static struct dyn_ftrace *ftrace_new_addrs;
 
@@ -912,6 +1003,269 @@ static struct ftrace_page	*ftrace_pages;
 
 static struct dyn_ftrace *ftrace_free_records;
 
+static struct ftrace_func_entry *
+ftrace_lookup_ip(struct ftrace_hash *hash, unsigned long ip)
+{
+	unsigned long key;
+	struct ftrace_func_entry *entry;
+	struct hlist_head *hhd;
+	struct hlist_node *n;
+
+	if (!hash->count)
+		return NULL;
+
+	if (hash->size_bits > 0)
+		key = hash_long(ip, hash->size_bits);
+	else
+		key = 0;
+
+	hhd = &hash->buckets[key];
+
+	hlist_for_each_entry_rcu(entry, n, hhd, hlist) {
+		if (entry->ip == ip)
+			return entry;
+	}
+	return NULL;
+}
+
+static void __add_hash_entry(struct ftrace_hash *hash,
+			     struct ftrace_func_entry *entry)
+{
+	struct hlist_head *hhd;
+	unsigned long key;
+
+	if (hash->size_bits)
+		key = hash_long(entry->ip, hash->size_bits);
+	else
+		key = 0;
+
+	hhd = &hash->buckets[key];
+	hlist_add_head(&entry->hlist, hhd);
+	hash->count++;
+}
+
+static int add_hash_entry(struct ftrace_hash *hash, unsigned long ip)
+{
+	struct ftrace_func_entry *entry;
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	entry->ip = ip;
+	__add_hash_entry(hash, entry);
+
+	return 0;
+}
+
+static void
+free_hash_entry(struct ftrace_hash *hash,
+		  struct ftrace_func_entry *entry)
+{
+	hlist_del(&entry->hlist);
+	kfree(entry);
+	hash->count--;
+}
+
+static void
+remove_hash_entry(struct ftrace_hash *hash,
+		  struct ftrace_func_entry *entry)
+{
+	hlist_del(&entry->hlist);
+	hash->count--;
+}
+
+static void ftrace_hash_clear(struct ftrace_hash *hash)
+{
+	struct hlist_head *hhd;
+	struct hlist_node *tp, *tn;
+	struct ftrace_func_entry *entry;
+	int size = 1 << hash->size_bits;
+	int i;
+
+	if (!hash->count)
+		return;
+
+	for (i = 0; i < size; i++) {
+		hhd = &hash->buckets[i];
+		hlist_for_each_entry_safe(entry, tp, tn, hhd, hlist)
+			free_hash_entry(hash, entry);
+	}
+	FTRACE_WARN_ON(hash->count);
+}
+
+static void free_ftrace_hash(struct ftrace_hash *hash)
+{
+	if (!hash || hash == EMPTY_HASH)
+		return;
+	ftrace_hash_clear(hash);
+	kfree(hash->buckets);
+	kfree(hash);
+}
+
+static void __free_ftrace_hash_rcu(struct rcu_head *rcu)
+{
+	struct ftrace_hash *hash;
+
+	hash = container_of(rcu, struct ftrace_hash, rcu);
+	free_ftrace_hash(hash);
+}
+
+static void free_ftrace_hash_rcu(struct ftrace_hash *hash)
+{
+	if (!hash || hash == EMPTY_HASH)
+		return;
+	call_rcu_sched(&hash->rcu, __free_ftrace_hash_rcu);
+}
+
+static struct ftrace_hash *alloc_ftrace_hash(int size_bits)
+{
+	struct ftrace_hash *hash;
+	int size;
+
+	hash = kzalloc(sizeof(*hash), GFP_KERNEL);
+	if (!hash)
+		return NULL;
+
+	size = 1 << size_bits;
+	hash->buckets = kzalloc(sizeof(*hash->buckets) * size, GFP_KERNEL);
+
+	if (!hash->buckets) {
+		kfree(hash);
+		return NULL;
+	}
+
+	hash->size_bits = size_bits;
+
+	return hash;
+}
+
+static struct ftrace_hash *
+alloc_and_copy_ftrace_hash(int size_bits, struct ftrace_hash *hash)
+{
+	struct ftrace_func_entry *entry;
+	struct ftrace_hash *new_hash;
+	struct hlist_node *tp;
+	int size;
+	int ret;
+	int i;
+
+	new_hash = alloc_ftrace_hash(size_bits);
+	if (!new_hash)
+		return NULL;
+
+	/* Empty hash? */
+	if (!hash || !hash->count)
+		return new_hash;
+
+	size = 1 << hash->size_bits;
+	for (i = 0; i < size; i++) {
+		hlist_for_each_entry(entry, tp, &hash->buckets[i], hlist) {
+			ret = add_hash_entry(new_hash, entry->ip);
+			if (ret < 0)
+				goto free_hash;
+		}
+	}
+
+	FTRACE_WARN_ON(new_hash->count != hash->count);
+
+	return new_hash;
+
+ free_hash:
+	free_ftrace_hash(new_hash);
+	return NULL;
+}
+
+static int
+ftrace_hash_move(struct ftrace_hash **dst, struct ftrace_hash *src)
+{
+	struct ftrace_func_entry *entry;
+	struct hlist_node *tp, *tn;
+	struct hlist_head *hhd;
+	struct ftrace_hash *old_hash;
+	struct ftrace_hash *new_hash;
+	unsigned long key;
+	int size = src->count;
+	int bits = 0;
+	int i;
+
+	/*
+	 * If the new source is empty, just free dst and assign it
+	 * the empty_hash.
+	 */
+	if (!src->count) {
+		free_ftrace_hash_rcu(*dst);
+		rcu_assign_pointer(*dst, EMPTY_HASH);
+		return 0;
+	}
+
+	/*
+	 * Make the hash size about 1/2 the # found
+	 */
+	for (size /= 2; size; size >>= 1)
+		bits++;
+
+	/* Don't allocate too much */
+	if (bits > FTRACE_HASH_MAX_BITS)
+		bits = FTRACE_HASH_MAX_BITS;
+
+	new_hash = alloc_ftrace_hash(bits);
+	if (!new_hash)
+		return -ENOMEM;
+
+	size = 1 << src->size_bits;
+	for (i = 0; i < size; i++) {
+		hhd = &src->buckets[i];
+		hlist_for_each_entry_safe(entry, tp, tn, hhd, hlist) {
+			if (bits > 0)
+				key = hash_long(entry->ip, bits);
+			else
+				key = 0;
+			remove_hash_entry(src, entry);
+			__add_hash_entry(new_hash, entry);
+		}
+	}
+
+	old_hash = *dst;
+	rcu_assign_pointer(*dst, new_hash);
+	free_ftrace_hash_rcu(old_hash);
+
+	return 0;
+}
+
+/*
+ * Test the hashes for this ops to see if we want to call
+ * the ops->func or not.
+ *
+ * It's a match if the ip is in the ops->filter_hash or
+ * the filter_hash does not exist or is empty,
+ *  AND
+ * the ip is not in the ops->notrace_hash.
+ *
+ * This needs to be called with preemption disabled as
+ * the hashes are freed with call_rcu_sched().
+ */
+static int
+ftrace_ops_test(struct ftrace_ops *ops, unsigned long ip)
+{
+	struct ftrace_hash *filter_hash;
+	struct ftrace_hash *notrace_hash;
+	int ret;
+
+	filter_hash = rcu_dereference_raw(ops->filter_hash);
+	notrace_hash = rcu_dereference_raw(ops->notrace_hash);
+
+	if ((!filter_hash || !filter_hash->count ||
+	     ftrace_lookup_ip(filter_hash, ip)) &&
+	    (!notrace_hash || !notrace_hash->count ||
+	     !ftrace_lookup_ip(notrace_hash, ip)))
+		ret = 1;
+	else
+		ret = 0;
+
+	return ret;
+}
+
 /*
  * This is a double for. Do not use 'break' to break out of the loop,
  * you must use a goto.
@@ -926,6 +1280,105 @@ static struct dyn_ftrace *ftrace_free_records;
 		}				\
 	}
 
+static void __ftrace_hash_rec_update(struct ftrace_ops *ops,
+				     int filter_hash,
+				     bool inc)
+{
+	struct ftrace_hash *hash;
+	struct ftrace_hash *other_hash;
+	struct ftrace_page *pg;
+	struct dyn_ftrace *rec;
+	int count = 0;
+	int all = 0;
+
+	/* Only update if the ops has been registered */
+	if (!(ops->flags & FTRACE_OPS_FL_ENABLED))
+		return;
+
+	/*
+	 * In the filter_hash case:
+	 *   If the count is zero, we update all records.
+	 *   Otherwise we just update the items in the hash.
+	 *
+	 * In the notrace_hash case:
+	 *   We enable the update in the hash.
+	 *   As disabling notrace means enabling the tracing,
+	 *   and enabling notrace means disabling, the inc variable
+	 *   gets inversed.
+	 */
+	if (filter_hash) {
+		hash = ops->filter_hash;
+		other_hash = ops->notrace_hash;
+		if (!hash || !hash->count)
+			all = 1;
+	} else {
+		inc = !inc;
+		hash = ops->notrace_hash;
+		other_hash = ops->filter_hash;
+		/*
+		 * If the notrace hash has no items,
+		 * then there's nothing to do.
+		 */
+		if (hash && !hash->count)
+			return;
+	}
+
+	do_for_each_ftrace_rec(pg, rec) {
+		int in_other_hash = 0;
+		int in_hash = 0;
+		int match = 0;
+
+		if (all) {
+			/*
+			 * Only the filter_hash affects all records.
+			 * Update if the record is not in the notrace hash.
+			 */
+			if (!other_hash || !ftrace_lookup_ip(other_hash, rec->ip))
+				match = 1;
+		} else {
+			in_hash = hash && !!ftrace_lookup_ip(hash, rec->ip);
+			in_other_hash = other_hash && !!ftrace_lookup_ip(other_hash, rec->ip);
+
+			/*
+			 *
+			 */
+			if (filter_hash && in_hash && !in_other_hash)
+				match = 1;
+			else if (!filter_hash && in_hash &&
+				 (in_other_hash || !other_hash->count))
+				match = 1;
+		}
+		if (!match)
+			continue;
+
+		if (inc) {
+			rec->flags++;
+			if (FTRACE_WARN_ON((rec->flags & ~FTRACE_FL_MASK) == FTRACE_REF_MAX))
+				return;
+		} else {
+			if (FTRACE_WARN_ON((rec->flags & ~FTRACE_FL_MASK) == 0))
+				return;
+			rec->flags--;
+		}
+		count++;
+		/* Shortcut, if we handled all records, we are done. */
+		if (!all && count == hash->count)
+			return;
+	} while_for_each_ftrace_rec();
+}
+
+static void ftrace_hash_rec_disable(struct ftrace_ops *ops,
+				    int filter_hash)
+{
+	__ftrace_hash_rec_update(ops, filter_hash, 0);
+}
+
+static void ftrace_hash_rec_enable(struct ftrace_ops *ops,
+				   int filter_hash)
+{
+	__ftrace_hash_rec_update(ops, filter_hash, 1);
+}
+
 static void ftrace_free_rec(struct dyn_ftrace *rec)
 {
 	rec->freelist = ftrace_free_records;
@@ -1047,18 +1500,18 @@ __ftrace_replace_code(struct dyn_ftrace *rec, int enable)
 	ftrace_addr = (unsigned long)FTRACE_ADDR;
 
 	/*
-	 * If this record is not to be traced or we want to disable it,
-	 * then disable it.
+	 * If we are enabling tracing:
+	 *
+	 *   If the record has a ref count, then we need to enable it
+	 *   because someone is using it.
 	 *
-	 * If we want to enable it and filtering is off, then enable it.
+	 *   Otherwise we make sure its disabled.
 	 *
-	 * If we want to enable it and filtering is on, enable it only if
-	 * it's filtered
+	 * If we are disabling tracing, then disable all records that
+	 * are enabled.
 	 */
-	if (enable && !(rec->flags & FTRACE_FL_NOTRACE)) {
-		if (!ftrace_filtered || (rec->flags & FTRACE_FL_FILTER))
-			flag = FTRACE_FL_ENABLED;
-	}
+	if (enable && (rec->flags & ~FTRACE_FL_MASK))
+		flag = FTRACE_FL_ENABLED;
 
 	/* If the state of this record hasn't changed, then do nothing */
 	if ((rec->flags & FTRACE_FL_ENABLED) == flag)
@@ -1079,19 +1532,16 @@ static void ftrace_replace_code(int enable)
 	struct ftrace_page *pg;
 	int failed;
 
+	if (unlikely(ftrace_disabled))
+		return;
+
 	do_for_each_ftrace_rec(pg, rec) {
-		/*
-		 * Skip over free records, records that have
-		 * failed and not converted.
-		 */
-		if (rec->flags & FTRACE_FL_FREE ||
-		    rec->flags & FTRACE_FL_FAILED ||
-		    !(rec->flags & FTRACE_FL_CONVERTED))
+		/* Skip over free records */
+		if (rec->flags & FTRACE_FL_FREE)
 			continue;
 
 		failed = __ftrace_replace_code(rec, enable);
 		if (failed) {
-			rec->flags |= FTRACE_FL_FAILED;
 			ftrace_bug(failed, rec->ip);
 			/* Stop processing */
 			return;
@@ -1107,10 +1557,12 @@ ftrace_code_disable(struct module *mod, struct dyn_ftrace *rec)
 
 	ip = rec->ip;
 
+	if (unlikely(ftrace_disabled))
+		return 0;
+
 	ret = ftrace_make_nop(mod, rec, MCOUNT_ADDR);
 	if (ret) {
 		ftrace_bug(ret, ip);
-		rec->flags |= FTRACE_FL_FAILED;
 		return 0;
 	}
 	return 1;
@@ -1171,6 +1623,7 @@ static void ftrace_run_update_code(int command)
 
 static ftrace_func_t saved_ftrace_func;
 static int ftrace_start_up;
+static int global_start_up;
 
 static void ftrace_startup_enable(int command)
 {
@@ -1185,19 +1638,36 @@ static void ftrace_startup_enable(int command)
 	ftrace_run_update_code(command);
 }
 
-static void ftrace_startup(int command)
+static void ftrace_startup(struct ftrace_ops *ops, int command)
 {
+	bool hash_enable = true;
+
 	if (unlikely(ftrace_disabled))
 		return;
 
 	ftrace_start_up++;
 	command |= FTRACE_ENABLE_CALLS;
 
+	/* ops marked global share the filter hashes */
+	if (ops->flags & FTRACE_OPS_FL_GLOBAL) {
+		ops = &global_ops;
+		/* Don't update hash if global is already set */
+		if (global_start_up)
+			hash_enable = false;
+		global_start_up++;
+	}
+
+	ops->flags |= FTRACE_OPS_FL_ENABLED;
+	if (hash_enable)
+		ftrace_hash_rec_enable(ops, 1);
+
 	ftrace_startup_enable(command);
 }
 
-static void ftrace_shutdown(int command)
+static void ftrace_shutdown(struct ftrace_ops *ops, int command)
 {
+	bool hash_disable = true;
+
 	if (unlikely(ftrace_disabled))
 		return;
 
@@ -1209,6 +1679,23 @@ static void ftrace_shutdown(int command)
 	 */
 	WARN_ON_ONCE(ftrace_start_up < 0);
 
+	if (ops->flags & FTRACE_OPS_FL_GLOBAL) {
+		ops = &global_ops;
+		global_start_up--;
+		WARN_ON_ONCE(global_start_up < 0);
+		/* Don't update hash if global still has users */
+		if (global_start_up) {
+			WARN_ON_ONCE(!ftrace_start_up);
+			hash_disable = false;
+		}
+	}
+
+	if (hash_disable)
+		ftrace_hash_rec_disable(ops, 1);
+
+	if (ops != &global_ops || !global_start_up)
+		ops->flags &= ~FTRACE_OPS_FL_ENABLED;
+
 	if (!ftrace_start_up)
 		command |= FTRACE_DISABLE_CALLS;
 
@@ -1268,15 +1755,15 @@ static int ftrace_update_code(struct module *mod)
 		p->flags = 0L;
 
 		/*
-		 * Do the initial record convertion from mcount jump
+		 * Do the initial record conversion from mcount jump
 		 * to the NOP instructions.
 		 */
 		if (!ftrace_code_disable(mod, p)) {
 			ftrace_free_rec(p);
-			continue;
+			/* Game over */
+			break;
 		}
 
-		p->flags |= FTRACE_FL_CONVERTED;
 		ftrace_update_cnt++;
 
 		/*
@@ -1351,9 +1838,9 @@ static int __init ftrace_dyn_table_alloc(unsigned long num_to_init)
 enum {
 	FTRACE_ITER_FILTER	= (1 << 0),
 	FTRACE_ITER_NOTRACE	= (1 << 1),
-	FTRACE_ITER_FAILURES	= (1 << 2),
-	FTRACE_ITER_PRINTALL	= (1 << 3),
-	FTRACE_ITER_HASH	= (1 << 4),
+	FTRACE_ITER_PRINTALL	= (1 << 2),
+	FTRACE_ITER_HASH	= (1 << 3),
+	FTRACE_ITER_ENABLED	= (1 << 4),
 };
 
 #define FTRACE_BUFF_MAX (KSYM_SYMBOL_LEN+4) /* room for wildcards */
@@ -1365,6 +1852,8 @@ struct ftrace_iterator {
 	struct dyn_ftrace		*func;
 	struct ftrace_func_probe	*probe;
 	struct trace_parser		parser;
+	struct ftrace_hash		*hash;
+	struct ftrace_ops		*ops;
 	int				hidx;
 	int				idx;
 	unsigned			flags;
@@ -1461,8 +1950,12 @@ static void *
 t_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	struct ftrace_iterator *iter = m->private;
+	struct ftrace_ops *ops = &global_ops;
 	struct dyn_ftrace *rec = NULL;
 
+	if (unlikely(ftrace_disabled))
+		return NULL;
+
 	if (iter->flags & FTRACE_ITER_HASH)
 		return t_hash_next(m, pos);
 
@@ -1483,17 +1976,15 @@ t_next(struct seq_file *m, void *v, loff_t *pos)
 		rec = &iter->pg->records[iter->idx++];
 		if ((rec->flags & FTRACE_FL_FREE) ||
 
-		    (!(iter->flags & FTRACE_ITER_FAILURES) &&
-		     (rec->flags & FTRACE_FL_FAILED)) ||
-
-		    ((iter->flags & FTRACE_ITER_FAILURES) &&
-		     !(rec->flags & FTRACE_FL_FAILED)) ||
-
 		    ((iter->flags & FTRACE_ITER_FILTER) &&
-		     !(rec->flags & FTRACE_FL_FILTER)) ||
+		     !(ftrace_lookup_ip(ops->filter_hash, rec->ip))) ||
 
 		    ((iter->flags & FTRACE_ITER_NOTRACE) &&
-		     !(rec->flags & FTRACE_FL_NOTRACE))) {
+		     !ftrace_lookup_ip(ops->notrace_hash, rec->ip)) ||
+
+		    ((iter->flags & FTRACE_ITER_ENABLED) &&
+		     !(rec->flags & ~FTRACE_FL_MASK))) {
+
 			rec = NULL;
 			goto retry;
 		}
@@ -1517,10 +2008,15 @@ static void reset_iter_read(struct ftrace_iterator *iter)
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
 	struct ftrace_iterator *iter = m->private;
+	struct ftrace_ops *ops = &global_ops;
 	void *p = NULL;
 	loff_t l;
 
 	mutex_lock(&ftrace_lock);
+
+	if (unlikely(ftrace_disabled))
+		return NULL;
+
 	/*
 	 * If an lseek was done, then reset and start from beginning.
 	 */
@@ -1532,7 +2028,7 @@ static void *t_start(struct seq_file *m, loff_t *pos)
 	 * off, we can short cut and just print out that all
 	 * functions are enabled.
 	 */
-	if (iter->flags & FTRACE_ITER_FILTER && !ftrace_filtered) {
+	if (iter->flags & FTRACE_ITER_FILTER && !ops->filter_hash->count) {
 		if (*pos > 0)
 			return t_hash_start(m, pos);
 		iter->flags |= FTRACE_ITER_PRINTALL;
@@ -1590,7 +2086,11 @@ static int t_show(struct seq_file *m, void *v)
 	if (!rec)
 		return 0;
 
-	seq_printf(m, "%ps\n", (void *)rec->ip);
+	seq_printf(m, "%ps", (void *)rec->ip);
+	if (iter->flags & FTRACE_ITER_ENABLED)
+		seq_printf(m, " (%ld)",
+			   rec->flags & ~FTRACE_FL_MASK);
+	seq_printf(m, "\n");
 
 	return 0;
 }
@@ -1630,44 +2130,46 @@ ftrace_avail_open(struct inode *inode, struct file *file)
 }
 
 static int
-ftrace_failures_open(struct inode *inode, struct file *file)
+ftrace_enabled_open(struct inode *inode, struct file *file)
 {
-	int ret;
-	struct seq_file *m;
 	struct ftrace_iterator *iter;
+	int ret;
+
+	if (unlikely(ftrace_disabled))
+		return -ENODEV;
+
+	iter = kzalloc(sizeof(*iter), GFP_KERNEL);
+	if (!iter)
+		return -ENOMEM;
+
+	iter->pg = ftrace_pages_start;
+	iter->flags = FTRACE_ITER_ENABLED;
 
-	ret = ftrace_avail_open(inode, file);
+	ret = seq_open(file, &show_ftrace_seq_ops);
 	if (!ret) {
-		m = file->private_data;
-		iter = m->private;
-		iter->flags = FTRACE_ITER_FAILURES;
+		struct seq_file *m = file->private_data;
+
+		m->private = iter;
+	} else {
+		kfree(iter);
 	}
 
 	return ret;
 }
 
-
-static void ftrace_filter_reset(int enable)
+static void ftrace_filter_reset(struct ftrace_hash *hash)
 {
-	struct ftrace_page *pg;
-	struct dyn_ftrace *rec;
-	unsigned long type = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE;
-
 	mutex_lock(&ftrace_lock);
-	if (enable)
-		ftrace_filtered = 0;
-	do_for_each_ftrace_rec(pg, rec) {
-		if (rec->flags & FTRACE_FL_FAILED)
-			continue;
-		rec->flags &= ~type;
-	} while_for_each_ftrace_rec();
+	ftrace_hash_clear(hash);
 	mutex_unlock(&ftrace_lock);
 }
 
 static int
-ftrace_regex_open(struct inode *inode, struct file *file, int enable)
+ftrace_regex_open(struct ftrace_ops *ops, int flag,
+		  struct inode *inode, struct file *file)
 {
 	struct ftrace_iterator *iter;
+	struct ftrace_hash *hash;
 	int ret = 0;
 
 	if (unlikely(ftrace_disabled))
@@ -1682,21 +2184,42 @@ ftrace_regex_open(struct inode *inode, struct file *file, int enable)
 		return -ENOMEM;
 	}
 
+	if (flag & FTRACE_ITER_NOTRACE)
+		hash = ops->notrace_hash;
+	else
+		hash = ops->filter_hash;
+
+	iter->ops = ops;
+	iter->flags = flag;
+
+	if (file->f_mode & FMODE_WRITE) {
+		mutex_lock(&ftrace_lock);
+		iter->hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, hash);
+		mutex_unlock(&ftrace_lock);
+
+		if (!iter->hash) {
+			trace_parser_put(&iter->parser);
+			kfree(iter);
+			return -ENOMEM;
+		}
+	}
+
 	mutex_lock(&ftrace_regex_lock);
+
 	if ((file->f_mode & FMODE_WRITE) &&
 	    (file->f_flags & O_TRUNC))
-		ftrace_filter_reset(enable);
+		ftrace_filter_reset(iter->hash);
 
 	if (file->f_mode & FMODE_READ) {
 		iter->pg = ftrace_pages_start;
-		iter->flags = enable ? FTRACE_ITER_FILTER :
-			FTRACE_ITER_NOTRACE;
 
 		ret = seq_open(file, &show_ftrace_seq_ops);
 		if (!ret) {
 			struct seq_file *m = file->private_data;
 			m->private = iter;
 		} else {
+			/* Failed */
+			free_ftrace_hash(iter->hash);
 			trace_parser_put(&iter->parser);
 			kfree(iter);
 		}
@@ -1710,13 +2233,15 @@ ftrace_regex_open(struct inode *inode, struct file *file, int enable)
 static int
 ftrace_filter_open(struct inode *inode, struct file *file)
 {
-	return ftrace_regex_open(inode, file, 1);
+	return ftrace_regex_open(&global_ops, FTRACE_ITER_FILTER,
+				 inode, file);
 }
 
 static int
 ftrace_notrace_open(struct inode *inode, struct file *file)
 {
-	return ftrace_regex_open(inode, file, 0);
+	return ftrace_regex_open(&global_ops, FTRACE_ITER_NOTRACE,
+				 inode, file);
 }
 
 static loff_t
@@ -1761,86 +2286,99 @@ static int ftrace_match(char *str, char *regex, int len, int type)
 }
 
 static int
-ftrace_match_record(struct dyn_ftrace *rec, char *regex, int len, int type)
+enter_record(struct ftrace_hash *hash, struct dyn_ftrace *rec, int not)
+{
+	struct ftrace_func_entry *entry;
+	int ret = 0;
+
+	entry = ftrace_lookup_ip(hash, rec->ip);
+	if (not) {
+		/* Do nothing if it doesn't exist */
+		if (!entry)
+			return 0;
+
+		free_hash_entry(hash, entry);
+	} else {
+		/* Do nothing if it exists */
+		if (entry)
+			return 0;
+
+		ret = add_hash_entry(hash, rec->ip);
+	}
+	return ret;
+}
+
+static int
+ftrace_match_record(struct dyn_ftrace *rec, char *mod,
+		    char *regex, int len, int type)
 {
 	char str[KSYM_SYMBOL_LEN];
+	char *modname;
+
+	kallsyms_lookup(rec->ip, NULL, NULL, &modname, str);
+
+	if (mod) {
+		/* module lookup requires matching the module */
+		if (!modname || strcmp(modname, mod))
+			return 0;
+
+		/* blank search means to match all funcs in the mod */
+		if (!len)
+			return 1;
+	}
 
-	kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
 	return ftrace_match(str, regex, len, type);
 }
 
-static int ftrace_match_records(char *buff, int len, int enable)
+static int
+match_records(struct ftrace_hash *hash, char *buff,
+	      int len, char *mod, int not)
 {
-	unsigned int search_len;
+	unsigned search_len = 0;
 	struct ftrace_page *pg;
 	struct dyn_ftrace *rec;
-	unsigned long flag;
-	char *search;
-	int type;
-	int not;
+	int type = MATCH_FULL;
+	char *search = buff;
 	int found = 0;
+	int ret;
 
-	flag = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE;
-	type = filter_parse_regex(buff, len, &search, &not);
-
-	search_len = strlen(search);
+	if (len) {
+		type = filter_parse_regex(buff, len, &search, &not);
+		search_len = strlen(search);
+	}
 
 	mutex_lock(&ftrace_lock);
-	do_for_each_ftrace_rec(pg, rec) {
 
-		if (rec->flags & FTRACE_FL_FAILED)
-			continue;
+	if (unlikely(ftrace_disabled))
+		goto out_unlock;
 
-		if (ftrace_match_record(rec, search, search_len, type)) {
-			if (not)
-				rec->flags &= ~flag;
-			else
-				rec->flags |= flag;
+	do_for_each_ftrace_rec(pg, rec) {
+
+		if (ftrace_match_record(rec, mod, search, search_len, type)) {
+			ret = enter_record(hash, rec, not);
+			if (ret < 0) {
+				found = ret;
+				goto out_unlock;
+			}
 			found = 1;
 		}
-		/*
-		 * Only enable filtering if we have a function that
-		 * is filtered on.
-		 */
-		if (enable && (rec->flags & FTRACE_FL_FILTER))
-			ftrace_filtered = 1;
 	} while_for_each_ftrace_rec();
+ out_unlock:
 	mutex_unlock(&ftrace_lock);
 
 	return found;
 }
 
 static int
-ftrace_match_module_record(struct dyn_ftrace *rec, char *mod,
-			   char *regex, int len, int type)
+ftrace_match_records(struct ftrace_hash *hash, char *buff, int len)
 {
-	char str[KSYM_SYMBOL_LEN];
-	char *modname;
-
-	kallsyms_lookup(rec->ip, NULL, NULL, &modname, str);
-
-	if (!modname || strcmp(modname, mod))
-		return 0;
-
-	/* blank search means to match all funcs in the mod */
-	if (len)
-		return ftrace_match(str, regex, len, type);
-	else
-		return 1;
+	return match_records(hash, buff, len, NULL, 0);
 }
 
-static int ftrace_match_module_records(char *buff, char *mod, int enable)
+static int
+ftrace_match_module_records(struct ftrace_hash *hash, char *buff, char *mod)
 {
-	unsigned search_len = 0;
-	struct ftrace_page *pg;
-	struct dyn_ftrace *rec;
-	int type = MATCH_FULL;
-	char *search = buff;
-	unsigned long flag;
 	int not = 0;
-	int found = 0;
-
-	flag = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE;
 
 	/* blank or '*' mean the same */
 	if (strcmp(buff, "*") == 0)
@@ -1852,32 +2390,7 @@ static int ftrace_match_module_records(char *buff, char *mod, int enable)
 		not = 1;
 	}
 
-	if (strlen(buff)) {
-		type = filter_parse_regex(buff, strlen(buff), &search, &not);
-		search_len = strlen(search);
-	}
-
-	mutex_lock(&ftrace_lock);
-	do_for_each_ftrace_rec(pg, rec) {
-
-		if (rec->flags & FTRACE_FL_FAILED)
-			continue;
-
-		if (ftrace_match_module_record(rec, mod,
-					       search, search_len, type)) {
-			if (not)
-				rec->flags &= ~flag;
-			else
-				rec->flags |= flag;
-			found = 1;
-		}
-		if (enable && (rec->flags & FTRACE_FL_FILTER))
-			ftrace_filtered = 1;
-
-	} while_for_each_ftrace_rec();
-	mutex_unlock(&ftrace_lock);
-
-	return found;
+	return match_records(hash, buff, strlen(buff), mod, not);
 }
 
 /*
@@ -1888,7 +2401,10 @@ static int ftrace_match_module_records(char *buff, char *mod, int enable)
 static int
 ftrace_mod_callback(char *func, char *cmd, char *param, int enable)
 {
+	struct ftrace_ops *ops = &global_ops;
+	struct ftrace_hash *hash;
 	char *mod;
+	int ret = -EINVAL;
 
 	/*
 	 * cmd == 'mod' because we only registered this func
@@ -1900,15 +2416,24 @@ ftrace_mod_callback(char *func, char *cmd, char *param, int enable)
 
 	/* we must have a module name */
 	if (!param)
-		return -EINVAL;
+		return ret;
 
 	mod = strsep(&param, ":");
 	if (!strlen(mod))
-		return -EINVAL;
+		return ret;
 
-	if (ftrace_match_module_records(func, mod, enable))
-		return 0;
-	return -EINVAL;
+	if (enable)
+		hash = ops->filter_hash;
+	else
+		hash = ops->notrace_hash;
+
+	ret = ftrace_match_module_records(hash, func, mod);
+	if (!ret)
+		ret = -EINVAL;
+	if (ret < 0)
+		return ret;
+
+	return 0;
 }
 
 static struct ftrace_func_command ftrace_mod_cmd = {
@@ -1959,6 +2484,7 @@ static int ftrace_probe_registered;
 
 static void __enable_ftrace_function_probe(void)
 {
+	int ret;
 	int i;
 
 	if (ftrace_probe_registered)
@@ -1973,13 +2499,16 @@ static void __enable_ftrace_function_probe(void)
 	if (i == FTRACE_FUNC_HASHSIZE)
 		return;
 
-	__register_ftrace_function(&trace_probe_ops);
-	ftrace_startup(0);
+	ret = __register_ftrace_function(&trace_probe_ops);
+	if (!ret)
+		ftrace_startup(&trace_probe_ops, 0);
+
 	ftrace_probe_registered = 1;
 }
 
 static void __disable_ftrace_function_probe(void)
 {
+	int ret;
 	int i;
 
 	if (!ftrace_probe_registered)
@@ -1992,8 +2521,10 @@ static void __disable_ftrace_function_probe(void)
 	}
 
 	/* no more funcs left */
-	__unregister_ftrace_function(&trace_probe_ops);
-	ftrace_shutdown(0);
+	ret = __unregister_ftrace_function(&trace_probe_ops);
+	if (!ret)
+		ftrace_shutdown(&trace_probe_ops, 0);
+
 	ftrace_probe_registered = 0;
 }
 
@@ -2029,12 +2560,13 @@ register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
 		return -EINVAL;
 
 	mutex_lock(&ftrace_lock);
-	do_for_each_ftrace_rec(pg, rec) {
 
-		if (rec->flags & FTRACE_FL_FAILED)
-			continue;
+	if (unlikely(ftrace_disabled))
+		goto out_unlock;
+
+	do_for_each_ftrace_rec(pg, rec) {
 
-		if (!ftrace_match_record(rec, search, len, type))
+		if (!ftrace_match_record(rec, NULL, search, len, type))
 			continue;
 
 		entry = kmalloc(sizeof(*entry), GFP_KERNEL);
@@ -2195,18 +2727,22 @@ int unregister_ftrace_command(struct ftrace_func_command *cmd)
 	return ret;
 }
 
-static int ftrace_process_regex(char *buff, int len, int enable)
+static int ftrace_process_regex(struct ftrace_hash *hash,
+				char *buff, int len, int enable)
 {
 	char *func, *command, *next = buff;
 	struct ftrace_func_command *p;
-	int ret = -EINVAL;
+	int ret;
 
 	func = strsep(&next, ":");
 
 	if (!next) {
-		if (ftrace_match_records(func, len, enable))
-			return 0;
-		return ret;
+		ret = ftrace_match_records(hash, func, len);
+		if (!ret)
+			ret = -EINVAL;
+		if (ret < 0)
+			return ret;
+		return 0;
 	}
 
 	/* command found */
@@ -2239,6 +2775,10 @@ ftrace_regex_write(struct file *file, const char __user *ubuf,
 
 	mutex_lock(&ftrace_regex_lock);
 
+	ret = -ENODEV;
+	if (unlikely(ftrace_disabled))
+		goto out_unlock;
+
 	if (file->f_mode & FMODE_READ) {
 		struct seq_file *m = file->private_data;
 		iter = m->private;
@@ -2250,7 +2790,7 @@ ftrace_regex_write(struct file *file, const char __user *ubuf,
 
 	if (read >= 0 && trace_parser_loaded(parser) &&
 	    !trace_parser_cont(parser)) {
-		ret = ftrace_process_regex(parser->buffer,
+		ret = ftrace_process_regex(iter->hash, parser->buffer,
 					   parser->idx, enable);
 		trace_parser_clear(parser);
 		if (ret)
@@ -2278,22 +2818,49 @@ ftrace_notrace_write(struct file *file, const char __user *ubuf,
 	return ftrace_regex_write(file, ubuf, cnt, ppos, 0);
 }
 
-static void
-ftrace_set_regex(unsigned char *buf, int len, int reset, int enable)
+static int
+ftrace_set_regex(struct ftrace_ops *ops, unsigned char *buf, int len,
+		 int reset, int enable)
 {
+	struct ftrace_hash **orig_hash;
+	struct ftrace_hash *hash;
+	int ret;
+
+	/* All global ops uses the global ops filters */
+	if (ops->flags & FTRACE_OPS_FL_GLOBAL)
+		ops = &global_ops;
+
 	if (unlikely(ftrace_disabled))
-		return;
+		return -ENODEV;
+
+	if (enable)
+		orig_hash = &ops->filter_hash;
+	else
+		orig_hash = &ops->notrace_hash;
+
+	hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, *orig_hash);
+	if (!hash)
+		return -ENOMEM;
 
 	mutex_lock(&ftrace_regex_lock);
 	if (reset)
-		ftrace_filter_reset(enable);
+		ftrace_filter_reset(hash);
 	if (buf)
-		ftrace_match_records(buf, len, enable);
+		ftrace_match_records(hash, buf, len);
+
+	mutex_lock(&ftrace_lock);
+	ret = ftrace_hash_move(orig_hash, hash);
+	mutex_unlock(&ftrace_lock);
+
 	mutex_unlock(&ftrace_regex_lock);
+
+	free_ftrace_hash(hash);
+	return ret;
 }
 
 /**
  * ftrace_set_filter - set a function to filter on in ftrace
+ * @ops - the ops to set the filter with
  * @buf - the string that holds the function filter text.
  * @len - the length of the string.
  * @reset - non zero to reset all filters before applying this filter.
@@ -2301,13 +2868,16 @@ ftrace_set_regex(unsigned char *buf, int len, int reset, int enable)
  * Filters denote which functions should be enabled when tracing is enabled.
  * If @buf is NULL and reset is set, all functions will be enabled for tracing.
  */
-void ftrace_set_filter(unsigned char *buf, int len, int reset)
+void ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
+		       int len, int reset)
 {
-	ftrace_set_regex(buf, len, reset, 1);
+	ftrace_set_regex(ops, buf, len, reset, 1);
 }
+EXPORT_SYMBOL_GPL(ftrace_set_filter);
 
 /**
  * ftrace_set_notrace - set a function to not trace in ftrace
+ * @ops - the ops to set the notrace filter with
  * @buf - the string that holds the function notrace text.
  * @len - the length of the string.
  * @reset - non zero to reset all filters before applying this filter.
@@ -2316,10 +2886,44 @@ void ftrace_set_filter(unsigned char *buf, int len, int reset)
  * is enabled. If @buf is NULL and reset is set, all functions will be enabled
  * for tracing.
  */
-void ftrace_set_notrace(unsigned char *buf, int len, int reset)
+void ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
+			int len, int reset)
 {
-	ftrace_set_regex(buf, len, reset, 0);
+	ftrace_set_regex(ops, buf, len, reset, 0);
 }
+EXPORT_SYMBOL_GPL(ftrace_set_notrace);
+/**
+ * ftrace_set_filter - set a function to filter on in ftrace
+ * @ops - the ops to set the filter with
+ * @buf - the string that holds the function filter text.
+ * @len - the length of the string.
+ * @reset - non zero to reset all filters before applying this filter.
+ *
+ * Filters denote which functions should be enabled when tracing is enabled.
+ * If @buf is NULL and reset is set, all functions will be enabled for tracing.
+ */
+void ftrace_set_global_filter(unsigned char *buf, int len, int reset)
+{
+	ftrace_set_regex(&global_ops, buf, len, reset, 1);
+}
+EXPORT_SYMBOL_GPL(ftrace_set_global_filter);
+
+/**
+ * ftrace_set_notrace - set a function to not trace in ftrace
+ * @ops - the ops to set the notrace filter with
+ * @buf - the string that holds the function notrace text.
+ * @len - the length of the string.
+ * @reset - non zero to reset all filters before applying this filter.
+ *
+ * Notrace Filters denote which functions should not be enabled when tracing
+ * is enabled. If @buf is NULL and reset is set, all functions will be enabled
+ * for tracing.
+ */
+void ftrace_set_global_notrace(unsigned char *buf, int len, int reset)
+{
+	ftrace_set_regex(&global_ops, buf, len, reset, 0);
+}
+EXPORT_SYMBOL_GPL(ftrace_set_global_notrace);
 
 /*
  * command line interface to allow users to set filters on boot up.
@@ -2370,22 +2974,23 @@ static void __init set_ftrace_early_graph(char *buf)
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
-static void __init set_ftrace_early_filter(char *buf, int enable)
+static void __init
+set_ftrace_early_filter(struct ftrace_ops *ops, char *buf, int enable)
 {
 	char *func;
 
 	while (buf) {
 		func = strsep(&buf, ",");
-		ftrace_set_regex(func, strlen(func), 0, enable);
+		ftrace_set_regex(ops, func, strlen(func), 0, enable);
 	}
 }
 
 static void __init set_ftrace_early_filters(void)
 {
 	if (ftrace_filter_buf[0])
-		set_ftrace_early_filter(ftrace_filter_buf, 1);
+		set_ftrace_early_filter(&global_ops, ftrace_filter_buf, 1);
 	if (ftrace_notrace_buf[0])
-		set_ftrace_early_filter(ftrace_notrace_buf, 0);
+		set_ftrace_early_filter(&global_ops, ftrace_notrace_buf, 0);
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	if (ftrace_graph_buf[0])
 		set_ftrace_early_graph(ftrace_graph_buf);
@@ -2393,11 +2998,14 @@ static void __init set_ftrace_early_filters(void)
 }
 
 static int
-ftrace_regex_release(struct inode *inode, struct file *file, int enable)
+ftrace_regex_release(struct inode *inode, struct file *file)
 {
 	struct seq_file *m = (struct seq_file *)file->private_data;
 	struct ftrace_iterator *iter;
+	struct ftrace_hash **orig_hash;
 	struct trace_parser *parser;
+	int filter_hash;
+	int ret;
 
 	mutex_lock(&ftrace_regex_lock);
 	if (file->f_mode & FMODE_READ) {
@@ -2410,33 +3018,41 @@ ftrace_regex_release(struct inode *inode, struct file *file, int enable)
 	parser = &iter->parser;
 	if (trace_parser_loaded(parser)) {
 		parser->buffer[parser->idx] = 0;
-		ftrace_match_records(parser->buffer, parser->idx, enable);
+		ftrace_match_records(iter->hash, parser->buffer, parser->idx);
 	}
 
-	mutex_lock(&ftrace_lock);
-	if (ftrace_start_up && ftrace_enabled)
-		ftrace_run_update_code(FTRACE_ENABLE_CALLS);
-	mutex_unlock(&ftrace_lock);
-
 	trace_parser_put(parser);
+
+	if (file->f_mode & FMODE_WRITE) {
+		filter_hash = !!(iter->flags & FTRACE_ITER_FILTER);
+
+		if (filter_hash)
+			orig_hash = &iter->ops->filter_hash;
+		else
+			orig_hash = &iter->ops->notrace_hash;
+
+		mutex_lock(&ftrace_lock);
+		/*
+		 * Remove the current set, update the hash and add
+		 * them back.
+		 */
+		ftrace_hash_rec_disable(iter->ops, filter_hash);
+		ret = ftrace_hash_move(orig_hash, iter->hash);
+		if (!ret) {
+			ftrace_hash_rec_enable(iter->ops, filter_hash);
+			if (iter->ops->flags & FTRACE_OPS_FL_ENABLED
+			    && ftrace_enabled)
+				ftrace_run_update_code(FTRACE_ENABLE_CALLS);
+		}
+		mutex_unlock(&ftrace_lock);
+	}
+	free_ftrace_hash(iter->hash);
 	kfree(iter);
 
 	mutex_unlock(&ftrace_regex_lock);
 	return 0;
 }
 
-static int
-ftrace_filter_release(struct inode *inode, struct file *file)
-{
-	return ftrace_regex_release(inode, file, 1);
-}
-
-static int
-ftrace_notrace_release(struct inode *inode, struct file *file)
-{
-	return ftrace_regex_release(inode, file, 0);
-}
-
 static const struct file_operations ftrace_avail_fops = {
 	.open = ftrace_avail_open,
 	.read = seq_read,
@@ -2444,8 +3060,8 @@ static const struct file_operations ftrace_avail_fops = {
 	.release = seq_release_private,
 };
 
-static const struct file_operations ftrace_failures_fops = {
-	.open = ftrace_failures_open,
+static const struct file_operations ftrace_enabled_fops = {
+	.open = ftrace_enabled_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = seq_release_private,
@@ -2456,7 +3072,7 @@ static const struct file_operations ftrace_filter_fops = {
 	.read = seq_read,
 	.write = ftrace_filter_write,
 	.llseek = ftrace_regex_lseek,
-	.release = ftrace_filter_release,
+	.release = ftrace_regex_release,
 };
 
 static const struct file_operations ftrace_notrace_fops = {
@@ -2464,7 +3080,7 @@ static const struct file_operations ftrace_notrace_fops = {
 	.read = seq_read,
 	.write = ftrace_notrace_write,
 	.llseek = ftrace_regex_lseek,
-	.release = ftrace_notrace_release,
+	.release = ftrace_regex_release,
 };
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -2573,9 +3189,6 @@ ftrace_set_func(unsigned long *array, int *idx, char *buffer)
 	bool exists;
 	int i;
 
-	if (ftrace_disabled)
-		return -ENODEV;
-
 	/* decode regex */
 	type = filter_parse_regex(buffer, strlen(buffer), &search, &not);
 	if (!not && *idx >= FTRACE_GRAPH_MAX_FUNCS)
@@ -2584,12 +3197,18 @@ ftrace_set_func(unsigned long *array, int *idx, char *buffer)
 	search_len = strlen(search);
 
 	mutex_lock(&ftrace_lock);
+
+	if (unlikely(ftrace_disabled)) {
+		mutex_unlock(&ftrace_lock);
+		return -ENODEV;
+	}
+
 	do_for_each_ftrace_rec(pg, rec) {
 
-		if (rec->flags & (FTRACE_FL_FAILED | FTRACE_FL_FREE))
+		if (rec->flags & FTRACE_FL_FREE)
 			continue;
 
-		if (ftrace_match_record(rec, search, search_len, type)) {
+		if (ftrace_match_record(rec, NULL, search, search_len, type)) {
 			/* if it is in the array */
 			exists = false;
 			for (i = 0; i < *idx; i++) {
@@ -2679,8 +3298,8 @@ static __init int ftrace_init_dyn_debugfs(struct dentry *d_tracer)
 	trace_create_file("available_filter_functions", 0444,
 			d_tracer, NULL, &ftrace_avail_fops);
 
-	trace_create_file("failures", 0444,
-			d_tracer, NULL, &ftrace_failures_fops);
+	trace_create_file("enabled_functions", 0444,
+			d_tracer, NULL, &ftrace_enabled_fops);
 
 	trace_create_file("set_ftrace_filter", 0644, d_tracer,
 			NULL, &ftrace_filter_fops);
@@ -2703,7 +3322,6 @@ static int ftrace_process_locs(struct module *mod,
 {
 	unsigned long *p;
 	unsigned long addr;
-	unsigned long flags;
 
 	mutex_lock(&ftrace_lock);
 	p = start;
@@ -2720,10 +3338,7 @@ static int ftrace_process_locs(struct module *mod,
 		ftrace_record_ip(addr);
 	}
 
-	/* disable interrupts to prevent kstop machine */
-	local_irq_save(flags);
 	ftrace_update_code(mod);
-	local_irq_restore(flags);
 	mutex_unlock(&ftrace_lock);
 
 	return 0;
@@ -2735,10 +3350,11 @@ void ftrace_release_mod(struct module *mod)
 	struct dyn_ftrace *rec;
 	struct ftrace_page *pg;
 
+	mutex_lock(&ftrace_lock);
+
 	if (ftrace_disabled)
-		return;
+		goto out_unlock;
 
-	mutex_lock(&ftrace_lock);
 	do_for_each_ftrace_rec(pg, rec) {
 		if (within_module_core(rec->ip, mod)) {
 			/*
@@ -2749,6 +3365,7 @@ void ftrace_release_mod(struct module *mod)
 			ftrace_free_rec(rec);
 		}
 	} while_for_each_ftrace_rec();
+ out_unlock:
 	mutex_unlock(&ftrace_lock);
 }
 
@@ -2835,6 +3452,10 @@ void __init ftrace_init(void)
 
 #else
 
+static struct ftrace_ops global_ops = {
+	.func			= ftrace_stub,
+};
+
 static int __init ftrace_nodyn_init(void)
 {
 	ftrace_enabled = 1;
@@ -2845,12 +3466,38 @@ device_initcall(ftrace_nodyn_init);
 static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; }
 static inline void ftrace_startup_enable(int command) { }
 /* Keep as macros so we do not need to define the commands */
-# define ftrace_startup(command)	do { } while (0)
-# define ftrace_shutdown(command)	do { } while (0)
+# define ftrace_startup(ops, command)	do { } while (0)
+# define ftrace_shutdown(ops, command)	do { } while (0)
 # define ftrace_startup_sysctl()	do { } while (0)
 # define ftrace_shutdown_sysctl()	do { } while (0)
+
+static inline int
+ftrace_ops_test(struct ftrace_ops *ops, unsigned long ip)
+{
+	return 1;
+}
+
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
+static void
+ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip)
+{
+	struct ftrace_ops *op;
+
+	/*
+	 * Some of the ops may be dynamically allocated,
+	 * they must be freed after a synchronize_sched().
+	 */
+	preempt_disable_notrace();
+	op = rcu_dereference_raw(ftrace_ops_list);
+	while (op != &ftrace_list_end) {
+		if (ftrace_ops_test(op, ip))
+			op->func(ip, parent_ip);
+		op = rcu_dereference_raw(op->next);
+	};
+	preempt_enable_notrace();
+}
+
 static void clear_ftrace_swapper(void)
 {
 	struct task_struct *p;
@@ -3143,19 +3790,23 @@ void ftrace_kill(void)
  */
 int register_ftrace_function(struct ftrace_ops *ops)
 {
-	int ret;
-
-	if (unlikely(ftrace_disabled))
-		return -1;
+	int ret = -1;
 
 	mutex_lock(&ftrace_lock);
 
+	if (unlikely(ftrace_disabled))
+		goto out_unlock;
+
 	ret = __register_ftrace_function(ops);
-	ftrace_startup(0);
+	if (!ret)
+		ftrace_startup(ops, 0);
 
+
+ out_unlock:
 	mutex_unlock(&ftrace_lock);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(register_ftrace_function);
 
 /**
  * unregister_ftrace_function - unregister a function for profiling.
@@ -3169,25 +3820,27 @@ int unregister_ftrace_function(struct ftrace_ops *ops)
 
 	mutex_lock(&ftrace_lock);
 	ret = __unregister_ftrace_function(ops);
-	ftrace_shutdown(0);
+	if (!ret)
+		ftrace_shutdown(ops, 0);
 	mutex_unlock(&ftrace_lock);
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(unregister_ftrace_function);
 
 int
 ftrace_enable_sysctl(struct ctl_table *table, int write,
 		     void __user *buffer, size_t *lenp,
 		     loff_t *ppos)
 {
-	int ret;
-
-	if (unlikely(ftrace_disabled))
-		return -ENODEV;
+	int ret = -ENODEV;
 
 	mutex_lock(&ftrace_lock);
 
-	ret  = proc_dointvec(table, write, buffer, lenp, ppos);
+	if (unlikely(ftrace_disabled))
+		goto out;
+
+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
 
 	if (ret || !write || (last_ftrace_enabled == !!ftrace_enabled))
 		goto out;
@@ -3199,11 +3852,11 @@ ftrace_enable_sysctl(struct ctl_table *table, int write,
 		ftrace_startup_sysctl();
 
 		/* we are starting ftrace again */
-		if (ftrace_list != &ftrace_list_end) {
-			if (ftrace_list->next == &ftrace_list_end)
-				ftrace_trace_function = ftrace_list->func;
+		if (ftrace_ops_list != &ftrace_list_end) {
+			if (ftrace_ops_list->next == &ftrace_list_end)
+				ftrace_trace_function = ftrace_ops_list->func;
 			else
-				ftrace_trace_function = ftrace_list_func;
+				ftrace_trace_function = ftrace_ops_list_func;
 		}
 
 	} else {
@@ -3392,7 +4045,7 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc,
 	ftrace_graph_return = retfunc;
 	ftrace_graph_entry = entryfunc;
 
-	ftrace_startup(FTRACE_START_FUNC_RET);
+	ftrace_startup(&global_ops, FTRACE_START_FUNC_RET);
 
 out:
 	mutex_unlock(&ftrace_lock);
@@ -3409,7 +4062,7 @@ void unregister_ftrace_graph(void)
 	ftrace_graph_active--;
 	ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
 	ftrace_graph_entry = ftrace_graph_entry_stub;
-	ftrace_shutdown(FTRACE_STOP_FUNC_RET);
+	ftrace_shutdown(&global_ops, FTRACE_STOP_FUNC_RET);
 	unregister_pm_notifier(&ftrace_suspend_notifier);
 	unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
 
@@ -3425,7 +4078,7 @@ graph_init_task(struct task_struct *t, struct ftrace_ret_stack *ret_stack)
 	atomic_set(&t->tracing_graph_pause, 0);
 	atomic_set(&t->trace_overrun, 0);
 	t->ftrace_timestamp = 0;
-	/* make curr_ret_stack visable before we add the ret_stack */
+	/* make curr_ret_stack visible before we add the ret_stack */
 	smp_wmb();
 	t->ret_stack = ret_stack;
 }
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index d9c8bcafb12..0ef7b4b2a1f 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1478,7 +1478,7 @@ static inline unsigned long rb_page_entries(struct buffer_page *bpage)
 	return local_read(&bpage->entries) & RB_WRITE_MASK;
 }
 
-/* Size is determined by what has been commited */
+/* Size is determined by what has been committed */
 static inline unsigned rb_page_size(struct buffer_page *bpage)
 {
 	return rb_page_commit(bpage);
@@ -2932,7 +2932,7 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
 	/*
 	 * cpu_buffer->pages just needs to point to the buffer, it
 	 *  has no specific buffer page to point to. Lets move it out
-	 *  of our way so we don't accidently swap it.
+	 *  of our way so we don't accidentally swap it.
 	 */
 	cpu_buffer->pages = reader->list.prev;
 
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 9541c27c1cf..ee9c921d7f2 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1110,6 +1110,7 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags,
 
 	entry->preempt_count		= pc & 0xff;
 	entry->pid			= (tsk) ? tsk->pid : 0;
+	entry->padding			= 0;
 	entry->flags =
 #ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
 		(irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) |
@@ -2013,9 +2014,10 @@ enum print_line_t print_trace_line(struct trace_iterator *iter)
 {
 	enum print_line_t ret;
 
-	if (iter->lost_events)
-		trace_seq_printf(&iter->seq, "CPU:%d [LOST %lu EVENTS]\n",
-				 iter->cpu, iter->lost_events);
+	if (iter->lost_events &&
+	    !trace_seq_printf(&iter->seq, "CPU:%d [LOST %lu EVENTS]\n",
+				 iter->cpu, iter->lost_events))
+		return TRACE_TYPE_PARTIAL_LINE;
 
 	if (iter->trace && iter->trace->print_line) {
 		ret = iter->trace->print_line(iter);
@@ -3229,6 +3231,14 @@ waitagain:
 
 		if (iter->seq.len >= cnt)
 			break;
+
+		/*
+		 * Setting the full flag means we reached the trace_seq buffer
+		 * size and we should leave by partial output condition above.
+		 * One of the trace_seq_* functions is not used properly.
+		 */
+		WARN_ONCE(iter->seq.full, "full flag set for trace type %d",
+			  iter->ent->type);
 	}
 	trace_access_unlock(iter->cpu_file);
 	trace_event_read_unlock();
@@ -3239,7 +3249,7 @@ waitagain:
 		trace_seq_init(&iter->seq);
 
 	/*
-	 * If there was nothing to send to user, inspite of consuming trace
+	 * If there was nothing to send to user, in spite of consuming trace
 	 * entries, go back to wait for more entries.
 	 */
 	if (sret == -EBUSY)
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 5e9dfc6286d..6b69c4bd306 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -419,6 +419,8 @@ extern void trace_find_cmdline(int pid, char comm[]);
 extern unsigned long ftrace_update_tot_cnt;
 #define DYN_FTRACE_TEST_NAME trace_selftest_dynamic_test_func
 extern int DYN_FTRACE_TEST_NAME(void);
+#define DYN_FTRACE_TEST_NAME2 trace_selftest_dynamic_test_func2
+extern int DYN_FTRACE_TEST_NAME2(void);
 #endif
 
 extern int ring_buffer_expanded;
diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index 685a67d55db..6302747a139 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -46,7 +46,7 @@ u64 notrace trace_clock_local(void)
 }
 
 /*
- * trace_clock(): 'inbetween' trace clock. Not completely serialized,
+ * trace_clock(): 'between' trace clock. Not completely serialized,
  * but not completely incorrect when crossing CPUs either.
  *
  * This is based on cpu_clock(), which will allow at most ~1 jiffy of
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index 1516cb3ec54..e32744c84d9 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -27,7 +27,7 @@
  *	  in the structure.
  *
  *   * for structures within structures, the format of the internal
- *	structure is layed out. This allows the internal structure
+ *	structure is laid out. This allows the internal structure
  *	to be deciphered for the format file. Although these macros
  *	may become out of sync with the internal structure, they
  *	will create a compile error if it happens. Since the
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index e88f74fe1d4..2fe11034135 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -116,6 +116,7 @@ static int trace_define_common_fields(void)
 	__common_field(unsigned char, flags);
 	__common_field(unsigned char, preempt_count);
 	__common_field(int, pid);
+	__common_field(int, padding);
 
 	return ret;
 }
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 16aee4d44e8..8d0e1cc4e97 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -149,11 +149,13 @@ function_stack_trace_call(unsigned long ip, unsigned long parent_ip)
 static struct ftrace_ops trace_ops __read_mostly =
 {
 	.func = function_trace_call,
+	.flags = FTRACE_OPS_FL_GLOBAL,
 };
 
 static struct ftrace_ops trace_stack_ops __read_mostly =
 {
 	.func = function_stack_trace_call,
+	.flags = FTRACE_OPS_FL_GLOBAL,
 };
 
 /* Our two options */
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 76b05980225..962cdb24ed8 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -905,7 +905,7 @@ print_graph_prologue(struct trace_iterator *iter, struct trace_seq *s,
  *
  * returns 1 if
  *  - we are inside irq code
- *  - we just extered irq code
+ *  - we just entered irq code
  *
  * retunns 0 if
  *  - funcgraph-interrupts option is set
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index 92b6e1e12d9..c77424be284 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -80,7 +80,7 @@ static struct tracer_flags tracer_flags = {
  * skip the latency if the sequence has changed - some other section
  * did a maximum and could disturb our measurement with serial console
  * printouts, etc. Truly coinciding maximum latencies should be rare
- * and what happens together happens separately as well, so this doesnt
+ * and what happens together happens separately as well, so this doesn't
  * decrease the validity of the maximum found:
  */
 static __cacheline_aligned_in_smp	unsigned long max_sequence;
@@ -153,6 +153,7 @@ irqsoff_tracer_call(unsigned long ip, unsigned long parent_ip)
 static struct ftrace_ops trace_ops __read_mostly =
 {
 	.func = irqsoff_tracer_call,
+	.flags = FTRACE_OPS_FL_GLOBAL,
 };
 #endif /* CONFIG_FUNCTION_TRACER */
 
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 8435b43b178..f925c45f0af 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -53,7 +53,6 @@ const char *reserved_field_names[] = {
 	"common_preempt_count",
 	"common_pid",
 	"common_tgid",
-	"common_lock_depth",
 	FIELD_STRING_IP,
 	FIELD_STRING_RETIP,
 	FIELD_STRING_FUNC,
@@ -1839,7 +1838,7 @@ static void unregister_probe_event(struct trace_probe *tp)
 	kfree(tp->call.print_fmt);
 }
 
-/* Make a debugfs interface for controling probe points */
+/* Make a debugfs interface for controlling probe points */
 static __init int init_kprobe_trace(void)
 {
 	struct dentry *d_tracer;
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 456be9063c2..cf535ccedc8 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -830,6 +830,9 @@ EXPORT_SYMBOL_GPL(unregister_ftrace_event);
 enum print_line_t trace_nop_print(struct trace_iterator *iter, int flags,
 				  struct trace_event *event)
 {
+	if (!trace_seq_printf(&iter->seq, "type: %d\n", iter->ent->type))
+		return TRACE_TYPE_PARTIAL_LINE;
+
 	return TRACE_TYPE_HANDLED;
 }
 
diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c
index 2547d8813cf..dff763b7baf 100644
--- a/kernel/trace/trace_printk.c
+++ b/kernel/trace/trace_printk.c
@@ -32,7 +32,7 @@ static DEFINE_MUTEX(btrace_mutex);
 
 struct trace_bprintk_fmt {
 	struct list_head list;
-	char fmt[0];
+	const char *fmt;
 };
 
 static inline struct trace_bprintk_fmt *lookup_format(const char *fmt)
@@ -49,6 +49,7 @@ static
 void hold_module_trace_bprintk_format(const char **start, const char **end)
 {
 	const char **iter;
+	char *fmt;
 
 	mutex_lock(&btrace_mutex);
 	for (iter = start; iter < end; iter++) {
@@ -58,14 +59,18 @@ void hold_module_trace_bprintk_format(const char **start, const char **end)
 			continue;
 		}
 
-		tb_fmt = kmalloc(offsetof(struct trace_bprintk_fmt, fmt)
-				+ strlen(*iter) + 1, GFP_KERNEL);
-		if (tb_fmt) {
+		tb_fmt = kmalloc(sizeof(*tb_fmt), GFP_KERNEL);
+		if (tb_fmt)
+			fmt = kmalloc(strlen(*iter) + 1, GFP_KERNEL);
+		if (tb_fmt && fmt) {
 			list_add_tail(&tb_fmt->list, &trace_bprintk_fmt_list);
-			strcpy(tb_fmt->fmt, *iter);
+			strcpy(fmt, *iter);
+			tb_fmt->fmt = fmt;
 			*iter = tb_fmt->fmt;
-		} else
+		} else {
+			kfree(tb_fmt);
 			*iter = NULL;
+		}
 	}
 	mutex_unlock(&btrace_mutex);
 }
@@ -84,6 +89,76 @@ static int module_trace_bprintk_format_notify(struct notifier_block *self,
 	return 0;
 }
 
+/*
+ * The debugfs/tracing/printk_formats file maps the addresses with
+ * the ASCII formats that are used in the bprintk events in the
+ * buffer. For userspace tools to be able to decode the events from
+ * the buffer, they need to be able to map the address with the format.
+ *
+ * The addresses of the bprintk formats are in their own section
+ * __trace_printk_fmt. But for modules we copy them into a link list.
+ * The code to print the formats and their addresses passes around the
+ * address of the fmt string. If the fmt address passed into the seq
+ * functions is within the kernel core __trace_printk_fmt section, then
+ * it simply uses the next pointer in the list.
+ *
+ * When the fmt pointer is outside the kernel core __trace_printk_fmt
+ * section, then we need to read the link list pointers. The trick is
+ * we pass the address of the string to the seq function just like
+ * we do for the kernel core formats. To get back the structure that
+ * holds the format, we simply use containerof() and then go to the
+ * next format in the list.
+ */
+static const char **
+find_next_mod_format(int start_index, void *v, const char **fmt, loff_t *pos)
+{
+	struct trace_bprintk_fmt *mod_fmt;
+
+	if (list_empty(&trace_bprintk_fmt_list))
+		return NULL;
+
+	/*
+	 * v will point to the address of the fmt record from t_next
+	 * v will be NULL from t_start.
+	 * If this is the first pointer or called from start
+	 * then we need to walk the list.
+	 */
+	if (!v || start_index == *pos) {
+		struct trace_bprintk_fmt *p;
+
+		/* search the module list */
+		list_for_each_entry(p, &trace_bprintk_fmt_list, list) {
+			if (start_index == *pos)
+				return &p->fmt;
+			start_index++;
+		}
+		/* pos > index */
+		return NULL;
+	}
+
+	/*
+	 * v points to the address of the fmt field in the mod list
+	 * structure that holds the module print format.
+	 */
+	mod_fmt = container_of(v, typeof(*mod_fmt), fmt);
+	if (mod_fmt->list.next == &trace_bprintk_fmt_list)
+		return NULL;
+
+	mod_fmt = container_of(mod_fmt->list.next, typeof(*mod_fmt), list);
+
+	return &mod_fmt->fmt;
+}
+
+static void format_mod_start(void)
+{
+	mutex_lock(&btrace_mutex);
+}
+
+static void format_mod_stop(void)
+{
+	mutex_unlock(&btrace_mutex);
+}
+
 #else /* !CONFIG_MODULES */
 __init static int
 module_trace_bprintk_format_notify(struct notifier_block *self,
@@ -91,6 +166,13 @@ module_trace_bprintk_format_notify(struct notifier_block *self,
 {
 	return 0;
 }
+static inline const char **
+find_next_mod_format(int start_index, void *v, const char **fmt, loff_t *pos)
+{
+	return NULL;
+}
+static inline void format_mod_start(void) { }
+static inline void format_mod_stop(void) { }
 #endif /* CONFIG_MODULES */
 
 
@@ -153,20 +235,33 @@ int __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap)
 }
 EXPORT_SYMBOL_GPL(__ftrace_vprintk);
 
+static const char **find_next(void *v, loff_t *pos)
+{
+	const char **fmt = v;
+	int start_index;
+
+	if (!fmt)
+		fmt = __start___trace_bprintk_fmt + *pos;
+
+	start_index = __stop___trace_bprintk_fmt - __start___trace_bprintk_fmt;
+
+	if (*pos < start_index)
+		return fmt;
+
+	return find_next_mod_format(start_index, v, fmt, pos);
+}
+
 static void *
 t_start(struct seq_file *m, loff_t *pos)
 {
-	const char **fmt = __start___trace_bprintk_fmt + *pos;
-
-	if ((unsigned long)fmt >= (unsigned long)__stop___trace_bprintk_fmt)
-		return NULL;
-	return fmt;
+	format_mod_start();
+	return find_next(NULL, pos);
 }
 
 static void *t_next(struct seq_file *m, void * v, loff_t *pos)
 {
 	(*pos)++;
-	return t_start(m, pos);
+	return find_next(v, pos);
 }
 
 static int t_show(struct seq_file *m, void *v)
@@ -205,6 +300,7 @@ static int t_show(struct seq_file *m, void *v)
 
 static void t_stop(struct seq_file *m, void *p)
 {
+	format_mod_stop();
 }
 
 static const struct seq_operations show_format_seq_ops = {
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 7319559ed59..f029dd4fd2c 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -129,6 +129,7 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
 static struct ftrace_ops trace_ops __read_mostly =
 {
 	.func = wakeup_tracer_call,
+	.flags = FTRACE_OPS_FL_GLOBAL,
 };
 #endif /* CONFIG_FUNCTION_TRACER */
 
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index 659732eba07..288541f977f 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -101,6 +101,206 @@ static inline void warn_failed_init_tracer(struct tracer *trace, int init_ret)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
+static int trace_selftest_test_probe1_cnt;
+static void trace_selftest_test_probe1_func(unsigned long ip,
+					    unsigned long pip)
+{
+	trace_selftest_test_probe1_cnt++;
+}
+
+static int trace_selftest_test_probe2_cnt;
+static void trace_selftest_test_probe2_func(unsigned long ip,
+					    unsigned long pip)
+{
+	trace_selftest_test_probe2_cnt++;
+}
+
+static int trace_selftest_test_probe3_cnt;
+static void trace_selftest_test_probe3_func(unsigned long ip,
+					    unsigned long pip)
+{
+	trace_selftest_test_probe3_cnt++;
+}
+
+static int trace_selftest_test_global_cnt;
+static void trace_selftest_test_global_func(unsigned long ip,
+					    unsigned long pip)
+{
+	trace_selftest_test_global_cnt++;
+}
+
+static int trace_selftest_test_dyn_cnt;
+static void trace_selftest_test_dyn_func(unsigned long ip,
+					 unsigned long pip)
+{
+	trace_selftest_test_dyn_cnt++;
+}
+
+static struct ftrace_ops test_probe1 = {
+	.func			= trace_selftest_test_probe1_func,
+};
+
+static struct ftrace_ops test_probe2 = {
+	.func			= trace_selftest_test_probe2_func,
+};
+
+static struct ftrace_ops test_probe3 = {
+	.func			= trace_selftest_test_probe3_func,
+};
+
+static struct ftrace_ops test_global = {
+	.func			= trace_selftest_test_global_func,
+	.flags			= FTRACE_OPS_FL_GLOBAL,
+};
+
+static void print_counts(void)
+{
+	printk("(%d %d %d %d %d) ",
+	       trace_selftest_test_probe1_cnt,
+	       trace_selftest_test_probe2_cnt,
+	       trace_selftest_test_probe3_cnt,
+	       trace_selftest_test_global_cnt,
+	       trace_selftest_test_dyn_cnt);
+}
+
+static void reset_counts(void)
+{
+	trace_selftest_test_probe1_cnt = 0;
+	trace_selftest_test_probe2_cnt = 0;
+	trace_selftest_test_probe3_cnt = 0;
+	trace_selftest_test_global_cnt = 0;
+	trace_selftest_test_dyn_cnt = 0;
+}
+
+static int trace_selftest_ops(int cnt)
+{
+	int save_ftrace_enabled = ftrace_enabled;
+	struct ftrace_ops *dyn_ops;
+	char *func1_name;
+	char *func2_name;
+	int len1;
+	int len2;
+	int ret = -1;
+
+	printk(KERN_CONT "PASSED\n");
+	pr_info("Testing dynamic ftrace ops #%d: ", cnt);
+
+	ftrace_enabled = 1;
+	reset_counts();
+
+	/* Handle PPC64 '.' name */
+	func1_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
+	func2_name = "*" __stringify(DYN_FTRACE_TEST_NAME2);
+	len1 = strlen(func1_name);
+	len2 = strlen(func2_name);
+
+	/*
+	 * Probe 1 will trace function 1.
+	 * Probe 2 will trace function 2.
+	 * Probe 3 will trace functions 1 and 2.
+	 */
+	ftrace_set_filter(&test_probe1, func1_name, len1, 1);
+	ftrace_set_filter(&test_probe2, func2_name, len2, 1);
+	ftrace_set_filter(&test_probe3, func1_name, len1, 1);
+	ftrace_set_filter(&test_probe3, func2_name, len2, 0);
+
+	register_ftrace_function(&test_probe1);
+	register_ftrace_function(&test_probe2);
+	register_ftrace_function(&test_probe3);
+	register_ftrace_function(&test_global);
+
+	DYN_FTRACE_TEST_NAME();
+
+	print_counts();
+
+	if (trace_selftest_test_probe1_cnt != 1)
+		goto out;
+	if (trace_selftest_test_probe2_cnt != 0)
+		goto out;
+	if (trace_selftest_test_probe3_cnt != 1)
+		goto out;
+	if (trace_selftest_test_global_cnt == 0)
+		goto out;
+
+	DYN_FTRACE_TEST_NAME2();
+
+	print_counts();
+
+	if (trace_selftest_test_probe1_cnt != 1)
+		goto out;
+	if (trace_selftest_test_probe2_cnt != 1)
+		goto out;
+	if (trace_selftest_test_probe3_cnt != 2)
+		goto out;
+
+	/* Add a dynamic probe */
+	dyn_ops = kzalloc(sizeof(*dyn_ops), GFP_KERNEL);
+	if (!dyn_ops) {
+		printk("MEMORY ERROR ");
+		goto out;
+	}
+
+	dyn_ops->func = trace_selftest_test_dyn_func;
+
+	register_ftrace_function(dyn_ops);
+
+	trace_selftest_test_global_cnt = 0;
+
+	DYN_FTRACE_TEST_NAME();
+
+	print_counts();
+
+	if (trace_selftest_test_probe1_cnt != 2)
+		goto out_free;
+	if (trace_selftest_test_probe2_cnt != 1)
+		goto out_free;
+	if (trace_selftest_test_probe3_cnt != 3)
+		goto out_free;
+	if (trace_selftest_test_global_cnt == 0)
+		goto out;
+	if (trace_selftest_test_dyn_cnt == 0)
+		goto out_free;
+
+	DYN_FTRACE_TEST_NAME2();
+
+	print_counts();
+
+	if (trace_selftest_test_probe1_cnt != 2)
+		goto out_free;
+	if (trace_selftest_test_probe2_cnt != 2)
+		goto out_free;
+	if (trace_selftest_test_probe3_cnt != 4)
+		goto out_free;
+
+	ret = 0;
+ out_free:
+	unregister_ftrace_function(dyn_ops);
+	kfree(dyn_ops);
+
+ out:
+	/* Purposely unregister in the same order */
+	unregister_ftrace_function(&test_probe1);
+	unregister_ftrace_function(&test_probe2);
+	unregister_ftrace_function(&test_probe3);
+	unregister_ftrace_function(&test_global);
+
+	/* Make sure everything is off */
+	reset_counts();
+	DYN_FTRACE_TEST_NAME();
+	DYN_FTRACE_TEST_NAME();
+
+	if (trace_selftest_test_probe1_cnt ||
+	    trace_selftest_test_probe2_cnt ||
+	    trace_selftest_test_probe3_cnt ||
+	    trace_selftest_test_global_cnt ||
+	    trace_selftest_test_dyn_cnt)
+		ret = -1;
+
+	ftrace_enabled = save_ftrace_enabled;
+
+	return ret;
+}
+
 /* Test dynamic code modification and ftrace filters */
 int trace_selftest_startup_dynamic_tracing(struct tracer *trace,
 					   struct trace_array *tr,
@@ -131,7 +331,7 @@ int trace_selftest_startup_dynamic_tracing(struct tracer *trace,
 	func_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
 
 	/* filter only on our function */
-	ftrace_set_filter(func_name, strlen(func_name), 1);
+	ftrace_set_global_filter(func_name, strlen(func_name), 1);
 
 	/* enable tracing */
 	ret = tracer_init(trace, tr);
@@ -166,22 +366,30 @@ int trace_selftest_startup_dynamic_tracing(struct tracer *trace,
 
 	/* check the trace buffer */
 	ret = trace_test_buffer(tr, &count);
-	trace->reset(tr);
 	tracing_start();
 
 	/* we should only have one item */
 	if (!ret && count != 1) {
+		trace->reset(tr);
 		printk(KERN_CONT ".. filter failed count=%ld ..", count);
 		ret = -1;
 		goto out;
 	}
 
+	/* Test the ops with global tracing running */
+	ret = trace_selftest_ops(1);
+	trace->reset(tr);
+
  out:
 	ftrace_enabled = save_ftrace_enabled;
 	tracer_enabled = save_tracer_enabled;
 
 	/* Enable tracing on all functions again */
-	ftrace_set_filter(NULL, 0, 1);
+	ftrace_set_global_filter(NULL, 0, 1);
+
+	/* Test the ops with global tracing off */
+	if (!ret)
+		ret = trace_selftest_ops(2);
 
 	return ret;
 }
diff --git a/kernel/trace/trace_selftest_dynamic.c b/kernel/trace/trace_selftest_dynamic.c
index 54dd77cce5b..b4c475a0a48 100644
--- a/kernel/trace/trace_selftest_dynamic.c
+++ b/kernel/trace/trace_selftest_dynamic.c
@@ -5,3 +5,9 @@ int DYN_FTRACE_TEST_NAME(void)
 	/* used to call mcount */
 	return 0;
 }
+
+int DYN_FTRACE_TEST_NAME2(void)
+{
+	/* used to call mcount */
+	return 0;
+}
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index 4c5dead0c23..b0b53b8e4c2 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -133,6 +133,7 @@ stack_trace_call(unsigned long ip, unsigned long parent_ip)
 static struct ftrace_ops trace_ops __read_mostly =
 {
 	.func = stack_trace_call,
+	.flags = FTRACE_OPS_FL_GLOBAL,
 };
 
 static ssize_t
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index 68187af4889..b219f1449c5 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -251,9 +251,9 @@ static void set_tracepoint(struct tracepoint_entry **entry,
 {
 	WARN_ON(strcmp((*entry)->name, elem->name) != 0);
 
-	if (elem->regfunc && !elem->state && active)
+	if (elem->regfunc && !jump_label_enabled(&elem->key) && active)
 		elem->regfunc();
-	else if (elem->unregfunc && elem->state && !active)
+	else if (elem->unregfunc && jump_label_enabled(&elem->key) && !active)
 		elem->unregfunc();
 
 	/*
@@ -264,13 +264,10 @@ static void set_tracepoint(struct tracepoint_entry **entry,
 	 * is used.
 	 */
 	rcu_assign_pointer(elem->funcs, (*entry)->funcs);
-	if (!elem->state && active) {
-		jump_label_enable(&elem->state);
-		elem->state = active;
-	} else if (elem->state && !active) {
-		jump_label_disable(&elem->state);
-		elem->state = active;
-	}
+	if (active && !jump_label_enabled(&elem->key))
+		jump_label_inc(&elem->key);
+	else if (!active && jump_label_enabled(&elem->key))
+		jump_label_dec(&elem->key);
 }
 
 /*
@@ -281,13 +278,11 @@ static void set_tracepoint(struct tracepoint_entry **entry,
  */
 static void disable_tracepoint(struct tracepoint *elem)
 {
-	if (elem->unregfunc && elem->state)
+	if (elem->unregfunc && jump_label_enabled(&elem->key))
 		elem->unregfunc();
 
-	if (elem->state) {
-		jump_label_disable(&elem->state);
-		elem->state = 0;
-	}
+	if (jump_label_enabled(&elem->key))
+		jump_label_dec(&elem->key);
 	rcu_assign_pointer(elem->funcs, NULL);
 }
 
diff --git a/kernel/user-return-notifier.c b/kernel/user-return-notifier.c
index eb27fd3430a..92cb706c7fc 100644
--- a/kernel/user-return-notifier.c
+++ b/kernel/user-return-notifier.c
@@ -20,7 +20,7 @@ EXPORT_SYMBOL_GPL(user_return_notifier_register);
 
 /*
  * Removes a registered user return notifier.  Must be called from atomic
- * context, and from the same cpu registration occured in.
+ * context, and from the same cpu registration occurred in.
  */
 void user_return_notifier_unregister(struct user_return_notifier *urn)
 {
diff --git a/kernel/wait.c b/kernel/wait.c
index b0310eb6cc1..f45ea8d2a1c 100644
--- a/kernel/wait.c
+++ b/kernel/wait.c
@@ -142,7 +142,7 @@ EXPORT_SYMBOL(finish_wait);
  * woken up through the queue.
  *
  * This prevents waiter starvation where an exclusive waiter
- * aborts and is woken up concurrently and noone wakes up
+ * aborts and is woken up concurrently and no one wakes up
  * the next waiter.
  */
 void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait,
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 140dce75045..14733d4d156 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -430,9 +430,12 @@ static int watchdog_enable(int cpu)
 		p = kthread_create(watchdog, (void *)(unsigned long)cpu, "watchdog/%d", cpu);
 		if (IS_ERR(p)) {
 			printk(KERN_ERR "softlockup watchdog for %i failed\n", cpu);
-			if (!err)
+			if (!err) {
 				/* if hardlockup hasn't already set this */
 				err = PTR_ERR(p);
+				/* and disable the perf event */
+				watchdog_nmi_disable(cpu);
+			}
 			goto out;
 		}
 		kthread_bind(p, cpu);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 04ef830690e..e3378e8d3a5 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1291,8 +1291,14 @@ __acquires(&gcwq->lock)
 			return true;
 		spin_unlock_irq(&gcwq->lock);
 
-		/* CPU has come up inbetween, retry migration */
+		/*
+		 * We've raced with CPU hot[un]plug.  Give it a breather
+		 * and retry migration.  cond_resched() is required here;
+		 * otherwise, we might deadlock against cpu_stop trying to
+		 * bring down the CPU on non-preemptive kernel.
+		 */
 		cpu_relax();
+		cond_resched();
 	}
 }
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index df9234c5f9d..10ef6198114 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -238,6 +238,21 @@ config DETECT_HUNG_TASK
 	  enabled then all held locks will also be reported. This
 	  feature has negligible overhead.
 
+config DEFAULT_HUNG_TASK_TIMEOUT
+	int "Default timeout for hung task detection (in seconds)"
+	depends on DETECT_HUNG_TASK
+	default 120
+	help
+	  This option controls the default timeout (in seconds) used
+	  to determine when a task has become non-responsive and should
+	  be considered hung.
+
+	  It can be adjusted at runtime via the kernel.hung_task_timeout
+	  sysctl or by writing a value to /proc/sys/kernel/hung_task_timeout.
+
+	  A timeout of 0 disables the check.  The default is two minutes.
+	  Keeping the default should be fine in most cases.
+
 config BOOTPARAM_HUNG_TASK_PANIC
 	bool "Panic (Reboot) On Hung Tasks"
 	depends on DETECT_HUNG_TASK
@@ -337,7 +352,7 @@ config DEBUG_OBJECTS_WORK
 
 config DEBUG_OBJECTS_RCU_HEAD
 	bool "Debug RCU callbacks objects"
-	depends on DEBUG_OBJECTS && PREEMPT
+	depends on DEBUG_OBJECTS
 	help
 	  Enable this to turn on debugging of RCU list heads (call_rcu() usage).
 
@@ -398,9 +413,9 @@ config SLUB_STATS
 config DEBUG_KMEMLEAK
 	bool "Kernel memory leak detector"
 	depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \
-		(X86 || ARM || PPC || S390 || SPARC64 || SUPERH || MICROBLAZE || TILE)
+		(X86 || ARM || PPC || MIPS || S390 || SPARC64 || SUPERH || MICROBLAZE || TILE)
 
-	select DEBUG_FS if SYSFS
+	select DEBUG_FS
 	select STACKTRACE if STACKTRACE_SUPPORT
 	select KALLSYMS
 	select CRC32
@@ -434,11 +449,9 @@ config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
 
 config DEBUG_KMEMLEAK_TEST
 	tristate "Simple test for the kernel memory leak detector"
-	depends on DEBUG_KMEMLEAK
+	depends on DEBUG_KMEMLEAK && m
 	help
-	  Say Y or M here to build a test for the kernel memory leak
-	  detector. This option enables a module that explicitly leaks
-	  memory.
+	  This option enables a module that explicitly leaks memory.
 
 	  If unsure, say N.
 
@@ -877,22 +890,9 @@ config RCU_TORTURE_TEST_RUNNABLE
 	  Say N here if you want the RCU torture tests to start only
 	  after being manually enabled via /proc.
 
-config RCU_CPU_STALL_DETECTOR
-	bool "Check for stalled CPUs delaying RCU grace periods"
-	depends on TREE_RCU || TREE_PREEMPT_RCU
-	default y
-	help
-	  This option causes RCU to printk information on which
-	  CPUs are delaying the current grace period, but only when
-	  the grace period extends for excessive time periods.
-
-	  Say N if you want to disable such checks.
-
-	  Say Y if you are unsure.
-
 config RCU_CPU_STALL_TIMEOUT
 	int "RCU CPU stall timeout in seconds"
-	depends on RCU_CPU_STALL_DETECTOR
+	depends on TREE_RCU || TREE_PREEMPT_RCU
 	range 3 300
 	default 60
 	help
@@ -901,22 +901,9 @@ config RCU_CPU_STALL_TIMEOUT
 	  RCU grace period persists, additional CPU stall warnings are
 	  printed at more widely spaced intervals.
 
-config RCU_CPU_STALL_DETECTOR_RUNNABLE
-	bool "RCU CPU stall checking starts automatically at boot"
-	depends on RCU_CPU_STALL_DETECTOR
-	default y
-	help
-	  If set, start checking for RCU CPU stalls immediately on
-	  boot.  Otherwise, RCU CPU stall checking must be manually
-	  enabled.
-
-	  Say Y if you are unsure.
-
-	  Say N if you wish to suppress RCU CPU stall checking during boot.
-
 config RCU_CPU_STALL_VERBOSE
 	bool "Print additional per-task information for RCU_CPU_STALL_DETECTOR"
-	depends on RCU_CPU_STALL_DETECTOR && TREE_PREEMPT_RCU
+	depends on TREE_PREEMPT_RCU
 	default y
 	help
 	  This option causes RCU to printk detailed per-task information
diff --git a/lib/Makefile b/lib/Makefile
index ef0f2857115..4b49a249064 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -21,7 +21,8 @@ lib-y	+= kobject.o kref.o klist.o
 
 obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
 	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
-	 string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o
+	 string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o \
+	 bsearch.o
 obj-y += kstrtox.o
 obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
 
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 741fae905ae..91e0ccfdb42 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -830,7 +830,7 @@ EXPORT_SYMBOL(bitmap_bitremap);
  *  @orig (i.e. bits 3, 5, 7 and 9) were also set.
  *
  *  When bit 11 is set in @orig, it means turn on the bit in
- *  @dst corresponding to whatever is the twelth bit that is
+ *  @dst corresponding to whatever is the twelfth bit that is
  *  turned on in @relmap.  In the above example, there were
  *  only ten bits turned on in @relmap (30..39), so that bit
  *  11 was set in @orig had no affect on @dst.
diff --git a/lib/bsearch.c b/lib/bsearch.c
new file mode 100644
index 00000000000..5b54758e2af
--- /dev/null
+++ b/lib/bsearch.c
@@ -0,0 +1,53 @@
+/*
+ * A generic implementation of binary search for the Linux kernel
+ *
+ * Copyright (C) 2008-2009 Ksplice, Inc.
+ * Author: Tim Abbott <tabbott@ksplice.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/bsearch.h>
+
+/*
+ * bsearch - binary search an array of elements
+ * @key: pointer to item being searched for
+ * @base: pointer to first element to search
+ * @num: number of elements
+ * @size: size of each element
+ * @cmp: pointer to comparison function
+ *
+ * This function does a binary search on the given array.  The
+ * contents of the array should already be in ascending sorted order
+ * under the provided comparison function.
+ *
+ * Note that the key need not have the same type as the elements in
+ * the array, e.g. key could be a string and the comparison function
+ * could compare the string with the struct's name field.  However, if
+ * the key and elements in the array are of the same type, you can use
+ * the same comparison function for both sort() and bsearch().
+ */
+void *bsearch(const void *key, const void *base, size_t num, size_t size,
+	      int (*cmp)(const void *key, const void *elt))
+{
+	size_t start = 0, end = num;
+	int result;
+
+	while (start < end) {
+		size_t mid = start + (end - start) / 2;
+
+		result = cmp(key, base + mid * size);
+		if (result < 0)
+			end = mid;
+		else if (result > 0)
+			start = mid + 1;
+		else
+			return (void *)base + mid * size;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(bsearch);
diff --git a/lib/btree.c b/lib/btree.c
index c9c6f035152..2a34392bcec 100644
--- a/lib/btree.c
+++ b/lib/btree.c
@@ -11,7 +11,7 @@
  * see http://programming.kicks-ass.net/kernel-patches/vma_lookup/btree.patch
  *
  * A relatively simple B+Tree implementation.  I have written it as a learning
- * excercise to understand how B+Trees work.  Turned out to be useful as well.
+ * exercise to understand how B+Trees work.  Turned out to be useful as well.
  *
  * B+Trees can be used similar to Linux radix trees (which don't have anything
  * in common with textbook radix trees, beware).  Prerequisite for them working
@@ -541,7 +541,7 @@ static void rebalance(struct btree_head *head, struct btree_geo *geo,
 	int i, no_left, no_right;
 
 	if (fill == 0) {
-		/* Because we don't steal entries from a neigbour, this case
+		/* Because we don't steal entries from a neighbour, this case
 		 * can happen.  Parent node contains a single child, this
 		 * node, so merging with a sibling never happens.
 		 */
diff --git a/lib/decompress_unxz.c b/lib/decompress_unxz.c
index cecd23df2b9..9f34eb56854 100644
--- a/lib/decompress_unxz.c
+++ b/lib/decompress_unxz.c
@@ -83,7 +83,7 @@
  *    safety_margin = 128 + uncompressed_size * 8 / 32768 + 65536
  *                  = 128 + (uncompressed_size >> 12) + 65536
  *
- * For comparision, according to arch/x86/boot/compressed/misc.c, the
+ * For comparison, according to arch/x86/boot/compressed/misc.c, the
  * equivalent formula for Deflate is this:
  *
  *    safety_margin = 18 + (uncompressed_size >> 12) + 32768
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 4bfb0471f10..db07bfd9298 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -649,7 +649,7 @@ out_err:
 	return -ENOMEM;
 }
 
-static int device_dma_allocations(struct device *dev)
+static int device_dma_allocations(struct device *dev, struct dma_debug_entry **out_entry)
 {
 	struct dma_debug_entry *entry;
 	unsigned long flags;
@@ -660,8 +660,10 @@ static int device_dma_allocations(struct device *dev)
 	for (i = 0; i < HASH_SIZE; ++i) {
 		spin_lock(&dma_entry_hash[i].lock);
 		list_for_each_entry(entry, &dma_entry_hash[i].list, list) {
-			if (entry->dev == dev)
+			if (entry->dev == dev) {
 				count += 1;
+				*out_entry = entry;
+			}
 		}
 		spin_unlock(&dma_entry_hash[i].lock);
 	}
@@ -674,6 +676,7 @@ static int device_dma_allocations(struct device *dev)
 static int dma_debug_device_change(struct notifier_block *nb, unsigned long action, void *data)
 {
 	struct device *dev = data;
+	struct dma_debug_entry *uninitialized_var(entry);
 	int count;
 
 	if (global_disable)
@@ -681,12 +684,17 @@ static int dma_debug_device_change(struct notifier_block *nb, unsigned long acti
 
 	switch (action) {
 	case BUS_NOTIFY_UNBOUND_DRIVER:
-		count = device_dma_allocations(dev);
+		count = device_dma_allocations(dev, &entry);
 		if (count == 0)
 			break;
-		err_printk(dev, NULL, "DMA-API: device driver has pending "
+		err_printk(dev, entry, "DMA-API: device driver has pending "
 				"DMA allocations while released from device "
-				"[count=%d]\n", count);
+				"[count=%d]\n"
+				"One of leaked entries details: "
+				"[device address=0x%016llx] [size=%llu bytes] "
+				"[mapped with %s] [mapped as %s]\n",
+			count, entry->dev_addr, entry->size,
+			dir2name[entry->direction], type2name[entry->type]);
 		break;
 	default:
 		break;
diff --git a/lib/flex_array.c b/lib/flex_array.c
index c0ea40ba208..854b57bd7d9 100644
--- a/lib/flex_array.c
+++ b/lib/flex_array.c
@@ -232,10 +232,10 @@ EXPORT_SYMBOL(flex_array_clear);
 
 /**
  * flex_array_prealloc - guarantee that array space exists
- * @fa:		the flex array for which to preallocate parts
- * @start:	index of first array element for which space is allocated
- * @end:	index of last (inclusive) element for which space is allocated
- * @flags:	page allocation flags
+ * @fa:			the flex array for which to preallocate parts
+ * @start:		index of first array element for which space is allocated
+ * @nr_elements:	number of elements for which space is allocated
+ * @flags:		page allocation flags
  *
  * This will guarantee that no future calls to flex_array_put()
  * will allocate memory.  It can be used if you are expecting to
@@ -245,14 +245,24 @@ EXPORT_SYMBOL(flex_array_clear);
  * Locking must be provided by the caller.
  */
 int flex_array_prealloc(struct flex_array *fa, unsigned int start,
-			unsigned int end, gfp_t flags)
+			unsigned int nr_elements, gfp_t flags)
 {
 	int start_part;
 	int end_part;
 	int part_nr;
+	unsigned int end;
 	struct flex_array_part *part;
 
-	if (start >= fa->total_nr_elements || end >= fa->total_nr_elements)
+	if (!start && !nr_elements)
+		return 0;
+	if (start >= fa->total_nr_elements)
+		return -ENOSPC;
+	if (!nr_elements)
+		return 0;
+
+	end = start + nr_elements - 1;
+
+	if (end >= fa->total_nr_elements)
 		return -ENOSPC;
 	if (elements_fit_in_base(fa))
 		return 0;
@@ -343,6 +353,8 @@ int flex_array_shrink(struct flex_array *fa)
 	int part_nr;
 	int ret = 0;
 
+	if (!fa->total_nr_elements)
+		return 0;
 	if (elements_fit_in_base(fa))
 		return ret;
 	for (part_nr = 0; part_nr < FLEX_ARRAY_NR_BASE_PTRS; part_nr++) {
diff --git a/lib/kstrtox.c b/lib/kstrtox.c
index 05672e819f8..a235f3cc471 100644
--- a/lib/kstrtox.c
+++ b/lib/kstrtox.c
@@ -49,12 +49,9 @@ static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res)
 			val = *s - '0';
 		else if ('a' <= _tolower(*s) && _tolower(*s) <= 'f')
 			val = _tolower(*s) - 'a' + 10;
-		else if (*s == '\n') {
-			if (*(s + 1) == '\0')
-				break;
-			else
-				return -EINVAL;
-		} else
+		else if (*s == '\n' && *(s + 1) == '\0')
+			break;
+		else
 			return -EINVAL;
 
 		if (val >= base)
diff --git a/lib/parser.c b/lib/parser.c
index 6e89eca5cca..dcbaaef6cf1 100644
--- a/lib/parser.c
+++ b/lib/parser.c
@@ -13,7 +13,7 @@
 
 /**
  * match_one: - Determines if a string matches a simple pattern
- * @s: the string to examine for presense of the pattern
+ * @s: the string to examine for presence of the pattern
  * @p: the string containing the pattern
  * @args: array of %MAX_OPT_ARGS &substring_t elements. Used to return match
  * locations.
diff --git a/lib/string.c b/lib/string.c
index f71bead1be3..01fad9b203e 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -535,6 +535,35 @@ bool sysfs_streq(const char *s1, const char *s2)
 }
 EXPORT_SYMBOL(sysfs_streq);
 
+/**
+ * strtobool - convert common user inputs into boolean values
+ * @s: input string
+ * @res: result
+ *
+ * This routine returns 0 iff the first character is one of 'Yy1Nn0'.
+ * Otherwise it will return -EINVAL.  Value pointed to by res is
+ * updated upon finding a match.
+ */
+int strtobool(const char *s, bool *res)
+{
+	switch (s[0]) {
+	case 'y':
+	case 'Y':
+	case '1':
+		*res = true;
+		break;
+	case 'n':
+	case 'N':
+	case '0':
+		*res = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(strtobool);
+
 #ifndef __HAVE_ARCH_MEMSET
 /**
  * memset - Fill a region of memory with the given value
diff --git a/lib/test-kstrtox.c b/lib/test-kstrtox.c
index 325c2f9eceb..d55769d63cb 100644
--- a/lib/test-kstrtox.c
+++ b/lib/test-kstrtox.c
@@ -315,12 +315,12 @@ static void __init test_kstrtou64_ok(void)
 		{"65537",	10,	65537},
 		{"2147483646",	10,	2147483646},
 		{"2147483647",	10,	2147483647},
-		{"2147483648",	10,	2147483648},
-		{"2147483649",	10,	2147483649},
-		{"4294967294",	10,	4294967294},
-		{"4294967295",	10,	4294967295},
-		{"4294967296",	10,	4294967296},
-		{"4294967297",	10,	4294967297},
+		{"2147483648",	10,	2147483648ULL},
+		{"2147483649",	10,	2147483649ULL},
+		{"4294967294",	10,	4294967294ULL},
+		{"4294967295",	10,	4294967295ULL},
+		{"4294967296",	10,	4294967296ULL},
+		{"4294967297",	10,	4294967297ULL},
 		{"9223372036854775806",	10,	9223372036854775806ULL},
 		{"9223372036854775807",	10,	9223372036854775807ULL},
 		{"9223372036854775808",	10,	9223372036854775808ULL},
@@ -369,12 +369,12 @@ static void __init test_kstrtos64_ok(void)
 		{"65537",	10,	65537},
 		{"2147483646",	10,	2147483646},
 		{"2147483647",	10,	2147483647},
-		{"2147483648",	10,	2147483648},
-		{"2147483649",	10,	2147483649},
-		{"4294967294",	10,	4294967294},
-		{"4294967295",	10,	4294967295},
-		{"4294967296",	10,	4294967296},
-		{"4294967297",	10,	4294967297},
+		{"2147483648",	10,	2147483648LL},
+		{"2147483649",	10,	2147483649LL},
+		{"4294967294",	10,	4294967294LL},
+		{"4294967295",	10,	4294967295LL},
+		{"4294967296",	10,	4294967296LL},
+		{"4294967297",	10,	4294967297LL},
 		{"9223372036854775806",	10,	9223372036854775806LL},
 		{"9223372036854775807",	10,	9223372036854775807LL},
 	};
@@ -418,10 +418,10 @@ static void __init test_kstrtou32_ok(void)
 		{"65537",	10,	65537},
 		{"2147483646",	10,	2147483646},
 		{"2147483647",	10,	2147483647},
-		{"2147483648",	10,	2147483648},
-		{"2147483649",	10,	2147483649},
-		{"4294967294",	10,	4294967294},
-		{"4294967295",	10,	4294967295},
+		{"2147483648",	10,	2147483648U},
+		{"2147483649",	10,	2147483649U},
+		{"4294967294",	10,	4294967294U},
+		{"4294967295",	10,	4294967295U},
 	};
 	TEST_OK(kstrtou32, u32, "%u", test_u32_ok);
 }
diff --git a/lib/timerqueue.c b/lib/timerqueue.c
index e3a1050e682..191176a43e9 100644
--- a/lib/timerqueue.c
+++ b/lib/timerqueue.c
@@ -5,7 +5,7 @@
  *  Uses rbtrees for quick list adds and expiration.
  *
  *  NOTE: All of the following functions need to be serialized
- *  to avoid races. No locking is done by this libary code.
+ *  to avoid races. No locking is done by this library code.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index bc0ac6b333d..dfd60192bc2 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -797,7 +797,7 @@ char *uuid_string(char *buf, char *end, const u8 *addr,
 	return string(buf, end, uuid, spec);
 }
 
-int kptr_restrict = 1;
+int kptr_restrict __read_mostly;
 
 /*
  * Show a '%p' thing.  A kernel extension is that the '%p' is followed
diff --git a/lib/xz/xz_dec_lzma2.c b/lib/xz/xz_dec_lzma2.c
index ea5fa4fe9d6..a6cdc969ea4 100644
--- a/lib/xz/xz_dec_lzma2.c
+++ b/lib/xz/xz_dec_lzma2.c
@@ -969,6 +969,9 @@ XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2 *s,
 			 */
 			tmp = b->in[b->in_pos++];
 
+			if (tmp == 0x00)
+				return XZ_STREAM_END;
+
 			if (tmp >= 0xE0 || tmp == 0x01) {
 				s->lzma2.need_props = true;
 				s->lzma2.need_dict_reset = false;
@@ -1001,9 +1004,6 @@ XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2 *s,
 						lzma_reset(s);
 				}
 			} else {
-				if (tmp == 0x00)
-					return XZ_STREAM_END;
-
 				if (tmp > 0x02)
 					return XZ_DATA_ERROR;
 
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 0d9a036ada6..befc87531e4 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -787,7 +787,7 @@ EXPORT_SYMBOL(congestion_wait);
  * jiffies for either a BDI to exit congestion of the given @sync queue
  * or a write to complete.
  *
- * In the absense of zone congestion, cond_resched() is called to yield
+ * In the absence of zone congestion, cond_resched() is called to yield
  * the processor if necessary but otherwise does not sleep.
  *
  * The return value is 0 if the sleep is for the full timeout. Otherwise,
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 0a619e0e2e0..83326ad66d9 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -244,24 +244,28 @@ static ssize_t single_flag_show(struct kobject *kobj,
 				struct kobj_attribute *attr, char *buf,
 				enum transparent_hugepage_flag flag)
 {
-	if (test_bit(flag, &transparent_hugepage_flags))
-		return sprintf(buf, "[yes] no\n");
-	else
-		return sprintf(buf, "yes [no]\n");
+	return sprintf(buf, "%d\n",
+		       !!test_bit(flag, &transparent_hugepage_flags));
 }
+
 static ssize_t single_flag_store(struct kobject *kobj,
 				 struct kobj_attribute *attr,
 				 const char *buf, size_t count,
 				 enum transparent_hugepage_flag flag)
 {
-	if (!memcmp("yes", buf,
-		    min(sizeof("yes")-1, count))) {
+	unsigned long value;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &value);
+	if (ret < 0)
+		return ret;
+	if (value > 1)
+		return -EINVAL;
+
+	if (value)
 		set_bit(flag, &transparent_hugepage_flags);
-	} else if (!memcmp("no", buf,
-			   min(sizeof("no")-1, count))) {
+	else
 		clear_bit(flag, &transparent_hugepage_flags);
-	} else
-		return -EINVAL;
 
 	return count;
 }
@@ -680,8 +684,11 @@ int do_huge_pmd_anonymous_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			return VM_FAULT_OOM;
 		page = alloc_hugepage_vma(transparent_hugepage_defrag(vma),
 					  vma, haddr, numa_node_id(), 0);
-		if (unlikely(!page))
+		if (unlikely(!page)) {
+			count_vm_event(THP_FAULT_FALLBACK);
 			goto out;
+		}
+		count_vm_event(THP_FAULT_ALLOC);
 		if (unlikely(mem_cgroup_newpage_charge(page, mm, GFP_KERNEL))) {
 			put_page(page);
 			goto out;
@@ -909,11 +916,13 @@ int do_huge_pmd_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		new_page = NULL;
 
 	if (unlikely(!new_page)) {
+		count_vm_event(THP_FAULT_FALLBACK);
 		ret = do_huge_pmd_wp_page_fallback(mm, vma, address,
 						   pmd, orig_pmd, page, haddr);
 		put_page(page);
 		goto out;
 	}
+	count_vm_event(THP_FAULT_ALLOC);
 
 	if (unlikely(mem_cgroup_newpage_charge(new_page, mm, GFP_KERNEL))) {
 		put_page(new_page);
@@ -1390,6 +1399,7 @@ int split_huge_page(struct page *page)
 
 	BUG_ON(!PageSwapBacked(page));
 	__split_huge_page(page, anon_vma);
+	count_vm_event(THP_SPLIT);
 
 	BUG_ON(PageCompound(page));
 out_unlock:
@@ -1398,6 +1408,9 @@ out:
 	return ret;
 }
 
+#define VM_NO_THP (VM_SPECIAL|VM_INSERTPAGE|VM_MIXEDMAP|VM_SAO| \
+		   VM_HUGETLB|VM_SHARED|VM_MAYSHARE)
+
 int hugepage_madvise(struct vm_area_struct *vma,
 		     unsigned long *vm_flags, int advice)
 {
@@ -1406,11 +1419,7 @@ int hugepage_madvise(struct vm_area_struct *vma,
 		/*
 		 * Be somewhat over-protective like KSM for now!
 		 */
-		if (*vm_flags & (VM_HUGEPAGE |
-				 VM_SHARED   | VM_MAYSHARE   |
-				 VM_PFNMAP   | VM_IO      | VM_DONTEXPAND |
-				 VM_RESERVED | VM_HUGETLB | VM_INSERTPAGE |
-				 VM_MIXEDMAP | VM_SAO))
+		if (*vm_flags & (VM_HUGEPAGE | VM_NO_THP))
 			return -EINVAL;
 		*vm_flags &= ~VM_NOHUGEPAGE;
 		*vm_flags |= VM_HUGEPAGE;
@@ -1426,11 +1435,7 @@ int hugepage_madvise(struct vm_area_struct *vma,
 		/*
 		 * Be somewhat over-protective like KSM for now!
 		 */
-		if (*vm_flags & (VM_NOHUGEPAGE |
-				 VM_SHARED   | VM_MAYSHARE   |
-				 VM_PFNMAP   | VM_IO      | VM_DONTEXPAND |
-				 VM_RESERVED | VM_HUGETLB | VM_INSERTPAGE |
-				 VM_MIXEDMAP | VM_SAO))
+		if (*vm_flags & (VM_NOHUGEPAGE | VM_NO_THP))
 			return -EINVAL;
 		*vm_flags &= ~VM_HUGEPAGE;
 		*vm_flags |= VM_NOHUGEPAGE;
@@ -1564,10 +1569,14 @@ int khugepaged_enter_vma_merge(struct vm_area_struct *vma)
 		 * page fault if needed.
 		 */
 		return 0;
-	if (vma->vm_file || vma->vm_ops)
+	if (vma->vm_ops)
 		/* khugepaged not yet working on file or special mappings */
 		return 0;
-	VM_BUG_ON(is_linear_pfn_mapping(vma) || is_pfn_mapping(vma));
+	/*
+	 * If is_pfn_mapping() is true is_learn_pfn_mapping() must be
+	 * true too, verify it here.
+	 */
+	VM_BUG_ON(is_linear_pfn_mapping(vma) || vma->vm_flags & VM_NO_THP);
 	hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK;
 	hend = vma->vm_end & HPAGE_PMD_MASK;
 	if (hstart < hend)
@@ -1784,9 +1793,11 @@ static void collapse_huge_page(struct mm_struct *mm,
 				      node, __GFP_OTHER_NODE);
 	if (unlikely(!new_page)) {
 		up_read(&mm->mmap_sem);
+		count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
 		*hpage = ERR_PTR(-ENOMEM);
 		return;
 	}
+	count_vm_event(THP_COLLAPSE_ALLOC);
 	if (unlikely(mem_cgroup_newpage_charge(new_page, mm, GFP_KERNEL))) {
 		up_read(&mm->mmap_sem);
 		put_page(new_page);
@@ -1816,12 +1827,15 @@ static void collapse_huge_page(struct mm_struct *mm,
 	    (vma->vm_flags & VM_NOHUGEPAGE))
 		goto out;
 
-	/* VM_PFNMAP vmas may have vm_ops null but vm_file set */
-	if (!vma->anon_vma || vma->vm_ops || vma->vm_file)
+	if (!vma->anon_vma || vma->vm_ops)
 		goto out;
 	if (is_vma_temporary_stack(vma))
 		goto out;
-	VM_BUG_ON(is_linear_pfn_mapping(vma) || is_pfn_mapping(vma));
+	/*
+	 * If is_pfn_mapping() is true is_learn_pfn_mapping() must be
+	 * true too, verify it here.
+	 */
+	VM_BUG_ON(is_linear_pfn_mapping(vma) || vma->vm_flags & VM_NO_THP);
 
 	pgd = pgd_offset(mm, address);
 	if (!pgd_present(*pgd))
@@ -2054,13 +2068,16 @@ static unsigned int khugepaged_scan_mm_slot(unsigned int pages,
 			progress++;
 			continue;
 		}
-		/* VM_PFNMAP vmas may have vm_ops null but vm_file set */
-		if (!vma->anon_vma || vma->vm_ops || vma->vm_file)
+		if (!vma->anon_vma || vma->vm_ops)
 			goto skip;
 		if (is_vma_temporary_stack(vma))
 			goto skip;
-
-		VM_BUG_ON(is_linear_pfn_mapping(vma) || is_pfn_mapping(vma));
+		/*
+		 * If is_pfn_mapping() is true is_learn_pfn_mapping()
+		 * must be true too, verify it here.
+		 */
+		VM_BUG_ON(is_linear_pfn_mapping(vma) ||
+			  vma->vm_flags & VM_NO_THP);
 
 		hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK;
 		hend = vma->vm_end & HPAGE_PMD_MASK;
@@ -2151,8 +2168,11 @@ static void khugepaged_do_scan(struct page **hpage)
 #ifndef CONFIG_NUMA
 		if (!*hpage) {
 			*hpage = alloc_hugepage(khugepaged_defrag());
-			if (unlikely(!*hpage))
+			if (unlikely(!*hpage)) {
+				count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
 				break;
+			}
+			count_vm_event(THP_COLLAPSE_ALLOC);
 		}
 #else
 		if (IS_ERR(*hpage))
@@ -2192,8 +2212,11 @@ static struct page *khugepaged_alloc_hugepage(void)
 
 	do {
 		hpage = alloc_hugepage(khugepaged_defrag());
-		if (!hpage)
+		if (!hpage) {
+			count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
 			khugepaged_alloc_sleep();
+		} else
+			count_vm_event(THP_COLLAPSE_ALLOC);
 	} while (unlikely(!hpage) &&
 		 likely(khugepaged_enabled()));
 	return hpage;
@@ -2210,8 +2233,11 @@ static void khugepaged_loop(void)
 	while (likely(khugepaged_enabled())) {
 #ifndef CONFIG_NUMA
 		hpage = khugepaged_alloc_hugepage();
-		if (unlikely(!hpage))
+		if (unlikely(!hpage)) {
+			count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
 			break;
+		}
+		count_vm_event(THP_COLLAPSE_ALLOC);
 #else
 		if (IS_ERR(hpage)) {
 			khugepaged_alloc_sleep();
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 06de5aa4d64..8ee3bd8ec5b 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -146,7 +146,7 @@ static long region_chg(struct list_head *head, long f, long t)
 		if (rg->from > t)
 			return chg;
 
-		/* We overlap with this area, if it extends futher than
+		/* We overlap with this area, if it extends further than
 		 * us then we must extend ourselves.  Account for its
 		 * existing reservation. */
 		if (rg->to > t) {
@@ -842,7 +842,7 @@ struct page *alloc_huge_page_node(struct hstate *h, int nid)
 }
 
 /*
- * Increase the hugetlb pool such that it can accomodate a reservation
+ * Increase the hugetlb pool such that it can accommodate a reservation
  * of size 'delta'.
  */
 static int gather_surplus_pages(struct hstate *h, int delta)
@@ -890,7 +890,7 @@ retry:
 
 	/*
 	 * The surplus_list now contains _at_least_ the number of extra pages
-	 * needed to accomodate the reservation.  Add the appropriate number
+	 * needed to accommodate the reservation.  Add the appropriate number
 	 * of pages to the hugetlb pool and free the extras back to the buddy
 	 * allocator.  Commit the entire reservation here to prevent another
 	 * process from stealing the pages as they are added to the pool but
@@ -2043,7 +2043,7 @@ static void hugetlb_vm_op_open(struct vm_area_struct *vma)
 	 * This new VMA should share its siblings reservation map if present.
 	 * The VMA will only ever have a valid reservation map pointer where
 	 * it is being copied for another still existing VMA.  As that VMA
-	 * has a reference to the reservation map it cannot dissappear until
+	 * has a reference to the reservation map it cannot disappear until
 	 * after this open call completes.  It is therefore safe to take a
 	 * new reference here without additional locking.
 	 */
@@ -2490,7 +2490,7 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	/*
 	 * Currently, we are forced to kill the process in the event the
 	 * original mapper has unmapped pages from the child due to a failed
-	 * COW. Warn that such a situation has occured as it may not be obvious
+	 * COW. Warn that such a situation has occurred as it may not be obvious
 	 */
 	if (is_vma_resv_set(vma, HPAGE_RESV_UNMAPPED)) {
 		printk(KERN_WARNING
diff --git a/mm/hwpoison-inject.c b/mm/hwpoison-inject.c
index 0948f1072d6..c7fc7fd00e3 100644
--- a/mm/hwpoison-inject.c
+++ b/mm/hwpoison-inject.c
@@ -1,4 +1,4 @@
-/* Inject a hwpoison memory failure on a arbitary pfn */
+/* Inject a hwpoison memory failure on a arbitrary pfn */
 #include <linux/module.h>
 #include <linux/debugfs.h>
 #include <linux/kernel.h>
diff --git a/mm/internal.h b/mm/internal.h
index 3438dd43a06..9d0ced8e505 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -162,7 +162,7 @@ static inline struct page *mem_map_offset(struct page *base, int offset)
 }
 
 /*
- * Iterator over all subpages withing the maximally aligned gigantic
+ * Iterator over all subpages within the maximally aligned gigantic
  * page 'base'.  Handle any discontiguity in the mem_map.
  */
 static inline struct page *mem_map_next(struct page *iter,
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 84225f3b719..aacee45616f 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -265,7 +265,7 @@ static void kmemleak_disable(void);
 } while (0)
 
 /*
- * Macro invoked when a serious kmemleak condition occured and cannot be
+ * Macro invoked when a serious kmemleak condition occurred and cannot be
  * recovered from. Kmemleak will be disabled and further allocation/freeing
  * tracing no longer available.
  */
@@ -1006,7 +1006,7 @@ static bool update_checksum(struct kmemleak_object *object)
 
 /*
  * Memory scanning is a long process and it needs to be interruptable. This
- * function checks whether such interrupt condition occured.
+ * function checks whether such interrupt condition occurred.
  */
 static int scan_should_stop(void)
 {
@@ -1414,9 +1414,12 @@ static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	++(*pos);
 
 	list_for_each_continue_rcu(n, &object_list) {
-		next_obj = list_entry(n, struct kmemleak_object, object_list);
-		if (get_object(next_obj))
+		struct kmemleak_object *obj =
+			list_entry(n, struct kmemleak_object, object_list);
+		if (get_object(obj)) {
+			next_obj = obj;
 			break;
+		}
 	}
 
 	put_object(prev_obj);
@@ -1733,7 +1736,7 @@ static int __init kmemleak_late_init(void)
 
 	if (atomic_read(&kmemleak_error)) {
 		/*
-		 * Some error occured and kmemleak was disabled. There is a
+		 * Some error occurred and kmemleak was disabled. There is a
 		 * small chance that kmemleak_disable() was called immediately
 		 * after setting kmemleak_initialized and we may end up with
 		 * two clean-up threads but serialized by scan_mutex.
diff --git a/mm/ksm.c b/mm/ksm.c
index 1bbe785aa55..942dfc73a2f 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -720,7 +720,7 @@ static int write_protect_page(struct vm_area_struct *vma, struct page *page,
 		swapped = PageSwapCache(page);
 		flush_cache_page(vma, addr, page_to_pfn(page));
 		/*
-		 * Ok this is tricky, when get_user_pages_fast() run it doesnt
+		 * Ok this is tricky, when get_user_pages_fast() run it doesn't
 		 * take any lock, therefore the check that we are going to make
 		 * with the pagecount against the mapcount is racey and
 		 * O_DIRECT can happen right after the check.
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 1f0b460fe58..010f9166fa6 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1466,7 +1466,7 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
 					break;
 				}
 				/*
-				 * We want to do more targetted reclaim.
+				 * We want to do more targeted reclaim.
 				 * excess >> 2 is not to excessive so as to
 				 * reclaim too much, nor too less that we keep
 				 * coming back to reclaim from this cgroup
@@ -2265,7 +2265,7 @@ void mem_cgroup_split_huge_fixup(struct page *head, struct page *tail)
  * - compound_lock is held when nr_pages > 1
  *
  * This function doesn't do "charge" nor css_get to new cgroup. It should be
- * done by a caller(__mem_cgroup_try_charge would be usefull). If @uncharge is
+ * done by a caller(__mem_cgroup_try_charge would be useful). If @uncharge is
  * true, this function does "uncharge" from old cgroup, but it doesn't if
  * @uncharge is false, so a caller should do "uncharge".
  */
@@ -2318,7 +2318,7 @@ static int mem_cgroup_move_account(struct page *page,
 	 * We charges against "to" which may not have any tasks. Then, "to"
 	 * can be under rmdir(). But in current implementation, caller of
 	 * this function is just force_empty() and move charge, so it's
-	 * garanteed that "to" is never removed. So, we don't check rmdir
+	 * guaranteed that "to" is never removed. So, we don't check rmdir
 	 * status here.
 	 */
 	move_unlock_page_cgroup(pc, &flags);
@@ -2648,7 +2648,7 @@ static void mem_cgroup_do_uncharge(struct mem_cgroup *mem,
 		batch->memcg = mem;
 	/*
 	 * do_batch > 0 when unmapping pages or inode invalidate/truncate.
-	 * In those cases, all pages freed continously can be expected to be in
+	 * In those cases, all pages freed continuously can be expected to be in
 	 * the same cgroup and we have chance to coalesce uncharges.
 	 * But we do uncharge one by one if this is killed by OOM(TIF_MEMDIE)
 	 * because we want to do uncharge as soon as possible.
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 37feb9fec22..2b9a5eef39e 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -208,7 +208,7 @@ static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno,
 	 * Don't use force here, it's convenient if the signal
 	 * can be temporarily blocked.
 	 * This could cause a loop when the user sets SIGBUS
-	 * to SIG_IGN, but hopefully noone will do that?
+	 * to SIG_IGN, but hopefully no one will do that?
 	 */
 	ret = send_sig_info(SIGBUS, &si, t);  /* synchronous? */
 	if (ret < 0)
@@ -634,7 +634,7 @@ static int me_pagecache_dirty(struct page *p, unsigned long pfn)
 		 * when the page is reread or dropped.  If an
 		 * application assumes it will always get error on
 		 * fsync, but does other operations on the fd before
-		 * and the page is dropped inbetween then the error
+		 * and the page is dropped between then the error
 		 * will not be properly reported.
 		 *
 		 * This can already happen even without hwpoisoned
@@ -728,7 +728,7 @@ static int me_huge_page(struct page *p, unsigned long pfn)
  * The table matches them in order and calls the right handler.
  *
  * This is quite tricky because we can access page at any time
- * in its live cycle, so all accesses have to be extremly careful.
+ * in its live cycle, so all accesses have to be extremely careful.
  *
  * This is not complete. More states could be added.
  * For any missing state don't attempt recovery.
diff --git a/mm/memory.c b/mm/memory.c
index 9da8cab1b1b..61e66f02656 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1359,7 +1359,7 @@ split_fallthrough:
 		 */
 		mark_page_accessed(page);
 	}
-	if (flags & FOLL_MLOCK) {
+	if ((flags & FOLL_MLOCK) && (vma->vm_flags & VM_LOCKED)) {
 		/*
 		 * The preliminary mapping check is mainly to avoid the
 		 * pointless overhead of lock_page on the ZERO_PAGE
@@ -1410,6 +1410,12 @@ no_page_table:
 	return page;
 }
 
+static inline int stack_guard_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	return stack_guard_page_start(vma, addr) ||
+	       stack_guard_page_end(vma, addr+PAGE_SIZE);
+}
+
 /**
  * __get_user_pages() - pin user pages in memory
  * @tsk:	task_struct of target task
@@ -1488,7 +1494,6 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 		vma = find_extend_vma(mm, start);
 		if (!vma && in_gate_area(mm, start)) {
 			unsigned long pg = start & PAGE_MASK;
-			struct vm_area_struct *gate_vma = get_gate_vma(mm);
 			pgd_t *pgd;
 			pud_t *pud;
 			pmd_t *pmd;
@@ -1513,10 +1518,11 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 				pte_unmap(pte);
 				return i ? : -EFAULT;
 			}
+			vma = get_gate_vma(mm);
 			if (pages) {
 				struct page *page;
 
-				page = vm_normal_page(gate_vma, start, *pte);
+				page = vm_normal_page(vma, start, *pte);
 				if (!page) {
 					if (!(gup_flags & FOLL_DUMP) &&
 					     is_zero_pfn(pte_pfn(*pte)))
@@ -1530,12 +1536,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 				get_page(page);
 			}
 			pte_unmap(pte);
-			if (vmas)
-				vmas[i] = gate_vma;
-			i++;
-			start += PAGE_SIZE;
-			nr_pages--;
-			continue;
+			goto next_page;
 		}
 
 		if (!vma ||
@@ -1565,6 +1566,11 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 				int ret;
 				unsigned int fault_flags = 0;
 
+				/* For mlock, just skip the stack guard page. */
+				if (foll_flags & FOLL_MLOCK) {
+					if (stack_guard_page(vma, start))
+						goto next_page;
+				}
 				if (foll_flags & FOLL_WRITE)
 					fault_flags |= FAULT_FLAG_WRITE;
 				if (nonblocking)
@@ -1631,6 +1637,7 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 				flush_anon_page(vma, page, start);
 				flush_dcache_page(page);
 			}
+next_page:
 			if (vmas)
 				vmas[i] = vma;
 			i++;
@@ -3386,7 +3393,7 @@ int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	 * run pte_offset_map on the pmd, if an huge pmd could
 	 * materialize from under us from a different thread.
 	 */
-	if (unlikely(__pte_alloc(mm, vma, pmd, address)))
+	if (unlikely(pmd_none(*pmd)) && __pte_alloc(mm, vma, pmd, address))
 		return VM_FAULT_OOM;
 	/* if an huge pmd materialized from under us just retry later */
 	if (unlikely(pmd_trans_huge(*pmd)))
@@ -3678,7 +3685,7 @@ static int __access_remote_vm(struct task_struct *tsk, struct mm_struct *mm,
 			 */
 #ifdef CONFIG_HAVE_IOREMAP_PROT
 			vma = find_vma(mm, addr);
-			if (!vma)
+			if (!vma || vma->vm_start > addr)
 				break;
 			if (vma->vm_ops && vma->vm_ops->access)
 				ret = vma->vm_ops->access(vma, addr, buf,
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 321fc7455df..9ca1d604f7c 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -375,7 +375,7 @@ void online_page(struct page *page)
 #endif
 
 #ifdef CONFIG_FLATMEM
-	max_mapnr = max(page_to_pfn(page), max_mapnr);
+	max_mapnr = max(pfn, max_mapnr);
 #endif
 
 	ClearPageReserved(page);
@@ -724,7 +724,7 @@ do_migrate_range(unsigned long start_pfn, unsigned long end_pfn)
 			       pfn);
 			dump_page(page);
 #endif
-			/* Becasue we don't have big zone->lock. we should
+			/* Because we don't have big zone->lock. we should
 			   check this again here. */
 			if (page_count(page)) {
 				not_managed++;
diff --git a/mm/migrate.c b/mm/migrate.c
index b0406d739ea..34132f8e910 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -375,7 +375,7 @@ void migrate_page_copy(struct page *newpage, struct page *page)
 		 * redo the accounting that clear_page_dirty_for_io undid,
 		 * but we can't use set_page_dirty because that function
 		 * is actually a signal that all of the page has become dirty.
-		 * Wheras only part of our page may be dirty.
+		 * Whereas only part of our page may be dirty.
 		 */
 		__set_page_dirty_nobuffers(newpage);
  	}
diff --git a/mm/mlock.c b/mm/mlock.c
index 2689a08c79a..516b2c2ddd5 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -135,13 +135,6 @@ void munlock_vma_page(struct page *page)
 	}
 }
 
-static inline int stack_guard_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	return (vma->vm_flags & VM_GROWSDOWN) &&
-		(vma->vm_start == addr) &&
-		!vma_stack_continue(vma->vm_prev, addr);
-}
-
 /**
  * __mlock_vma_pages_range() -  mlock a range of pages in the vma.
  * @vma:   target vma
@@ -169,7 +162,7 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma,
 	VM_BUG_ON(end   > vma->vm_end);
 	VM_BUG_ON(!rwsem_is_locked(&mm->mmap_sem));
 
-	gup_flags = FOLL_TOUCH;
+	gup_flags = FOLL_TOUCH | FOLL_MLOCK;
 	/*
 	 * We want to touch writable mappings with a write fault in order
 	 * to break COW, except for shared mappings because these don't COW
@@ -185,15 +178,6 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma,
 	if (vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))
 		gup_flags |= FOLL_FORCE;
 
-	if (vma->vm_flags & VM_LOCKED)
-		gup_flags |= FOLL_MLOCK;
-
-	/* We don't try to access the guard page of a stack vma */
-	if (stack_guard_page(vma, start)) {
-		addr += PAGE_SIZE;
-		nr_pages--;
-	}
-
 	return __get_user_pages(current, mm, addr, nr_pages, gup_flags,
 				NULL, NULL, nonblocking);
 }
diff --git a/mm/mmap.c b/mm/mmap.c
index 2ec8eb5a9cd..772140c53ab 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -259,7 +259,7 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
 	 * randomize_va_space to 2, which will still cause mm->start_brk
 	 * to be arbitrarily shifted
 	 */
-	if (mm->start_brk > PAGE_ALIGN(mm->end_data))
+	if (current->brk_randomized)
 		min_brk = mm->start_brk;
 	else
 		min_brk = mm->end_data;
@@ -1767,10 +1767,13 @@ int expand_upwards(struct vm_area_struct *vma, unsigned long address)
 		size = address - vma->vm_start;
 		grow = (address - vma->vm_end) >> PAGE_SHIFT;
 
-		error = acct_stack_growth(vma, size, grow);
-		if (!error) {
-			vma->vm_end = address;
-			perf_event_mmap(vma);
+		error = -ENOMEM;
+		if (vma->vm_pgoff + (size >> PAGE_SHIFT) >= vma->vm_pgoff) {
+			error = acct_stack_growth(vma, size, grow);
+			if (!error) {
+				vma->vm_end = address;
+				perf_event_mmap(vma);
+			}
 		}
 	}
 	vma_unlock_anon_vma(vma);
@@ -1814,11 +1817,14 @@ static int expand_downwards(struct vm_area_struct *vma,
 		size = vma->vm_end - address;
 		grow = (vma->vm_start - address) >> PAGE_SHIFT;
 
-		error = acct_stack_growth(vma, size, grow);
-		if (!error) {
-			vma->vm_start = address;
-			vma->vm_pgoff -= grow;
-			perf_event_mmap(vma);
+		error = -ENOMEM;
+		if (grow <= vma->vm_pgoff) {
+			error = acct_stack_growth(vma, size, grow);
+			if (!error) {
+				vma->vm_start = address;
+				vma->vm_pgoff -= grow;
+				perf_event_mmap(vma);
+			}
 		}
 	}
 	vma_unlock_anon_vma(vma);
diff --git a/mm/mremap.c b/mm/mremap.c
index 1de98d492dd..a7c1f9f9b94 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -277,9 +277,16 @@ static struct vm_area_struct *vma_to_resize(unsigned long addr,
 	if (old_len > vma->vm_end - addr)
 		goto Efault;
 
-	if (vma->vm_flags & (VM_DONTEXPAND | VM_PFNMAP)) {
-		if (new_len > old_len)
+	/* Need to be careful about a growing mapping */
+	if (new_len > old_len) {
+		unsigned long pgoff;
+
+		if (vma->vm_flags & (VM_DONTEXPAND | VM_PFNMAP))
 			goto Efault;
+		pgoff = (addr - vma->vm_start) >> PAGE_SHIFT;
+		pgoff += vma->vm_pgoff;
+		if (pgoff + (new_len >> PAGE_SHIFT) < pgoff)
+			goto Einval;
 	}
 
 	if (vma->vm_flags & VM_LOCKED) {
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index e99f6cd1da1..9109049f0bb 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -150,7 +150,7 @@ unsigned long __init free_all_bootmem(void)
 {
 	/*
 	 * We need to use MAX_NUMNODES instead of NODE_DATA(0)->node_id
-	 *  because in some case like Node0 doesnt have RAM installed
+	 *  because in some case like Node0 doesn't have RAM installed
 	 *  low ram will be on Node1
 	 * Use MAX_NUMNODES will make sure all ranges in early_node_map[]
 	 *  will be used instead of only Node0 related
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 6a819d1b2c7..f52e85c80e8 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -84,24 +84,6 @@ static bool has_intersects_mems_allowed(struct task_struct *tsk,
 #endif /* CONFIG_NUMA */
 
 /*
- * If this is a system OOM (not a memcg OOM) and the task selected to be
- * killed is not already running at high (RT) priorities, speed up the
- * recovery by boosting the dying task to the lowest FIFO priority.
- * That helps with the recovery and avoids interfering with RT tasks.
- */
-static void boost_dying_task_prio(struct task_struct *p,
-				  struct mem_cgroup *mem)
-{
-	struct sched_param param = { .sched_priority = 1 };
-
-	if (mem)
-		return;
-
-	if (!rt_task(p))
-		sched_setscheduler_nocheck(p, SCHED_FIFO, &param);
-}
-
-/*
  * The process p may have detached its own ->mm while exiting or through
  * use_mm(), but one or more of its subthreads may still have a valid
  * pointer.  Return p, or any of its subthreads with a valid ->mm, with
@@ -190,10 +172,13 @@ unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem,
 
 	/*
 	 * The baseline for the badness score is the proportion of RAM that each
-	 * task's rss and swap space use.
+	 * task's rss, pagetable and swap space use.
 	 */
-	points = (get_mm_rss(p->mm) + get_mm_counter(p->mm, MM_SWAPENTS)) * 1000 /
-			totalpages;
+	points = get_mm_rss(p->mm) + p->mm->nr_ptes;
+	points += get_mm_counter(p->mm, MM_SWAPENTS);
+
+	points *= 1000;
+	points /= totalpages;
 	task_unlock(p);
 
 	/*
@@ -452,13 +437,6 @@ static int oom_kill_task(struct task_struct *p, struct mem_cgroup *mem)
 	set_tsk_thread_flag(p, TIF_MEMDIE);
 	force_sig(SIGKILL, p);
 
-	/*
-	 * We give our sacrificial lamb high priority and access to
-	 * all the memory it needs. That way it should be able to
-	 * exit() and clear out its resources quickly...
-	 */
-	boost_dying_task_prio(p, mem);
-
 	return 0;
 }
 #undef K
@@ -482,7 +460,6 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
 	 */
 	if (p->flags & PF_EXITING) {
 		set_tsk_thread_flag(p, TIF_MEMDIE);
-		boost_dying_task_prio(p, mem);
 		return 0;
 	}
 
@@ -556,7 +533,6 @@ void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask)
 	 */
 	if (fatal_signal_pending(current)) {
 		set_thread_flag(TIF_MEMDIE);
-		boost_dying_task_prio(current, NULL);
 		return;
 	}
 
@@ -712,7 +688,6 @@ void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
 	 */
 	if (fatal_signal_pending(current)) {
 		set_thread_flag(TIF_MEMDIE);
-		boost_dying_task_prio(current, NULL);
 		return;
 	}
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index d6e7ba7373b..d49df784054 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -54,6 +54,7 @@
 #include <trace/events/kmem.h>
 #include <linux/ftrace_event.h>
 #include <linux/memcontrol.h>
+#include <linux/prefetch.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>
@@ -942,7 +943,7 @@ __rmqueue_fallback(struct zone *zone, int order, int start_migratetype)
 			 * If breaking a large block of pages, move all free
 			 * pages to the preferred allocation list. If falling
 			 * back for a reclaimable kernel allocation, be more
-			 * agressive about taking ownership of free pages
+			 * aggressive about taking ownership of free pages
 			 */
 			if (unlikely(current_order >= (pageblock_order >> 1)) ||
 					start_migratetype == MIGRATE_RECLAIMABLE ||
@@ -2317,6 +2318,21 @@ void free_pages(unsigned long addr, unsigned int order)
 
 EXPORT_SYMBOL(free_pages);
 
+static void *make_alloc_exact(unsigned long addr, unsigned order, size_t size)
+{
+	if (addr) {
+		unsigned long alloc_end = addr + (PAGE_SIZE << order);
+		unsigned long used = addr + PAGE_ALIGN(size);
+
+		split_page(virt_to_page((void *)addr), order);
+		while (used < alloc_end) {
+			free_page(used);
+			used += PAGE_SIZE;
+		}
+	}
+	return (void *)addr;
+}
+
 /**
  * alloc_pages_exact - allocate an exact number physically-contiguous pages.
  * @size: the number of bytes to allocate
@@ -2336,22 +2352,33 @@ void *alloc_pages_exact(size_t size, gfp_t gfp_mask)
 	unsigned long addr;
 
 	addr = __get_free_pages(gfp_mask, order);
-	if (addr) {
-		unsigned long alloc_end = addr + (PAGE_SIZE << order);
-		unsigned long used = addr + PAGE_ALIGN(size);
-
-		split_page(virt_to_page((void *)addr), order);
-		while (used < alloc_end) {
-			free_page(used);
-			used += PAGE_SIZE;
-		}
-	}
-
-	return (void *)addr;
+	return make_alloc_exact(addr, order, size);
 }
 EXPORT_SYMBOL(alloc_pages_exact);
 
 /**
+ * alloc_pages_exact_nid - allocate an exact number of physically-contiguous
+ *			   pages on a node.
+ * @nid: the preferred node ID where memory should be allocated
+ * @size: the number of bytes to allocate
+ * @gfp_mask: GFP flags for the allocation
+ *
+ * Like alloc_pages_exact(), but try to allocate on node nid first before falling
+ * back.
+ * Note this is not alloc_pages_exact_node() which allocates on a specific node,
+ * but is not exact.
+ */
+void *alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask)
+{
+	unsigned order = get_order(size);
+	struct page *p = alloc_pages_node(nid, gfp_mask, order);
+	if (!p)
+		return NULL;
+	return make_alloc_exact((unsigned long)page_address(p), order, size);
+}
+EXPORT_SYMBOL(alloc_pages_exact_nid);
+
+/**
  * free_pages_exact - release memory allocated via alloc_pages_exact()
  * @virt: the value returned by alloc_pages_exact.
  * @size: size of allocation, same value as passed to alloc_pages_exact().
@@ -3176,7 +3203,7 @@ static __init_refok int __build_all_zonelists(void *data)
  * Called with zonelists_mutex held always
  * unless system_state == SYSTEM_BOOTING.
  */
-void build_all_zonelists(void *data)
+void __ref build_all_zonelists(void *data)
 {
 	set_zonelist_order();
 
@@ -3564,7 +3591,7 @@ int zone_wait_table_init(struct zone *zone, unsigned long zone_size_pages)
 
 	if (!slab_is_available()) {
 		zone->wait_table = (wait_queue_head_t *)
-			alloc_bootmem_node(pgdat, alloc_size);
+			alloc_bootmem_node_nopanic(pgdat, alloc_size);
 	} else {
 		/*
 		 * This case means that a zone whose size was 0 gets new memory
@@ -3926,7 +3953,7 @@ static void __init find_usable_zone_for_movable(void)
 
 /*
  * The zone ranges provided by the architecture do not include ZONE_MOVABLE
- * because it is sized independant of architecture. Unlike the other zones,
+ * because it is sized independent of architecture. Unlike the other zones,
  * the starting point for ZONE_MOVABLE is not fixed. It may be different
  * in each node depending on the size of each node and how evenly kernelcore
  * is distributed. This helper function adjusts the zone ranges
@@ -4141,7 +4168,8 @@ static void __init setup_usemap(struct pglist_data *pgdat,
 	unsigned long usemapsize = usemap_size(zonesize);
 	zone->pageblock_flags = NULL;
 	if (usemapsize)
-		zone->pageblock_flags = alloc_bootmem_node(pgdat, usemapsize);
+		zone->pageblock_flags = alloc_bootmem_node_nopanic(pgdat,
+								   usemapsize);
 }
 #else
 static inline void setup_usemap(struct pglist_data *pgdat,
@@ -4307,7 +4335,7 @@ static void __init_refok alloc_node_mem_map(struct pglist_data *pgdat)
 		size =  (end - start) * sizeof(struct page);
 		map = alloc_remap(pgdat->node_id, size);
 		if (!map)
-			map = alloc_bootmem_node(pgdat, size);
+			map = alloc_bootmem_node_nopanic(pgdat, size);
 		pgdat->node_mem_map = map + (pgdat->node_start_pfn - start);
 	}
 #ifndef CONFIG_NEED_MULTIPLE_NODES
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index a12cc3fa985..2daadc322ba 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -134,7 +134,7 @@ static void *__init_refok alloc_page_cgroup(size_t size, int nid)
 {
 	void *addr = NULL;
 
-	addr = alloc_pages_exact(size, GFP_KERNEL | __GFP_NOWARN);
+	addr = alloc_pages_exact_nid(nid, size, GFP_KERNEL | __GFP_NOWARN);
 	if (addr)
 		return addr;
 
@@ -377,7 +377,7 @@ not_enough_page:
  * @new: new id
  *
  * Returns old id at success, 0 at failure.
- * (There is no mem_cgroup useing 0 as its id)
+ * (There is no mem_cgroup using 0 as its id)
  */
 unsigned short swap_cgroup_cmpxchg(swp_entry_t ent,
 					unsigned short old, unsigned short new)
diff --git a/mm/percpu.c b/mm/percpu.c
index 55d4d113fbd..a160db39b81 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -342,7 +342,7 @@ static void pcpu_chunk_relocate(struct pcpu_chunk *chunk, int oslot)
  * @chunk: chunk of interest
  *
  * Determine whether area map of @chunk needs to be extended to
- * accomodate a new allocation.
+ * accommodate a new allocation.
  *
  * CONTEXT:
  * pcpu_lock.
@@ -431,7 +431,7 @@ out_unlock:
  * depending on @head, is reduced by @tail bytes and @tail byte block
  * is inserted after the target block.
  *
- * @chunk->map must have enough free slots to accomodate the split.
+ * @chunk->map must have enough free slots to accommodate the split.
  *
  * CONTEXT:
  * pcpu_lock.
@@ -1435,7 +1435,7 @@ static struct pcpu_alloc_info * __init pcpu_build_alloc_info(
 	/*
 	 * Determine min_unit_size, alloc_size and max_upa such that
 	 * alloc_size is multiple of atom_size and is the smallest
-	 * which can accomodate 4k aligned segments which are equal to
+	 * which can accommodate 4k aligned segments which are equal to
 	 * or larger than min_unit_size.
 	 */
 	min_unit_size = max_t(size_t, size_sum, PCPU_MIN_UNIT_SIZE);
@@ -1550,7 +1550,7 @@ static struct pcpu_alloc_info * __init pcpu_build_alloc_info(
  * @atom_size: allocation atom size
  * @cpu_distance_fn: callback to determine distance between cpus, optional
  * @alloc_fn: function to allocate percpu page
- * @free_fn: funtion to free percpu page
+ * @free_fn: function to free percpu page
  *
  * This is a helper to ease setting up embedded first percpu chunk and
  * can be called where pcpu_setup_first_chunk() is expected.
@@ -1678,7 +1678,7 @@ out_free:
  * pcpu_page_first_chunk - map the first chunk using PAGE_SIZE pages
  * @reserved_size: the size of reserved percpu area in bytes
  * @alloc_fn: function to allocate percpu page, always called with PAGE_SIZE
- * @free_fn: funtion to free percpu page, always called with PAGE_SIZE
+ * @free_fn: function to free percpu page, always called with PAGE_SIZE
  * @populate_pte_fn: function to populate pte
  *
  * This is a helper to ease setting up page-remapped first percpu
diff --git a/mm/prio_tree.c b/mm/prio_tree.c
index 603ae98d969..799dcfd7cd8 100644
--- a/mm/prio_tree.c
+++ b/mm/prio_tree.c
@@ -13,6 +13,7 @@
 
 #include <linux/mm.h>
 #include <linux/prio_tree.h>
+#include <linux/prefetch.h>
 
 /*
  * See lib/prio_tree.c for details on the general radix priority search tree
diff --git a/mm/shmem.c b/mm/shmem.c
index 58da7c150ba..dfc7069102e 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -421,7 +421,8 @@ static swp_entry_t *shmem_swp_alloc(struct shmem_inode_info *info, unsigned long
 		 * a waste to allocate index if we cannot allocate data.
 		 */
 		if (sbinfo->max_blocks) {
-			if (percpu_counter_compare(&sbinfo->used_blocks, (sbinfo->max_blocks - 1)) > 0)
+			if (percpu_counter_compare(&sbinfo->used_blocks,
+						sbinfo->max_blocks - 1) >= 0)
 				return ERR_PTR(-ENOSPC);
 			percpu_counter_inc(&sbinfo->used_blocks);
 			spin_lock(&inode->i_lock);
@@ -851,7 +852,7 @@ static inline int shmem_find_swp(swp_entry_t entry, swp_entry_t *dir, swp_entry_
 
 static int shmem_unuse_inode(struct shmem_inode_info *info, swp_entry_t entry, struct page *page)
 {
-	struct inode *inode;
+	struct address_space *mapping;
 	unsigned long idx;
 	unsigned long size;
 	unsigned long limit;
@@ -874,8 +875,10 @@ static int shmem_unuse_inode(struct shmem_inode_info *info, swp_entry_t entry, s
 	if (size > SHMEM_NR_DIRECT)
 		size = SHMEM_NR_DIRECT;
 	offset = shmem_find_swp(entry, ptr, ptr+size);
-	if (offset >= 0)
+	if (offset >= 0) {
+		shmem_swp_balance_unmap();
 		goto found;
+	}
 	if (!info->i_indirect)
 		goto lost2;
 
@@ -913,11 +916,11 @@ static int shmem_unuse_inode(struct shmem_inode_info *info, swp_entry_t entry, s
 			if (size > ENTRIES_PER_PAGE)
 				size = ENTRIES_PER_PAGE;
 			offset = shmem_find_swp(entry, ptr, ptr+size);
-			shmem_swp_unmap(ptr);
 			if (offset >= 0) {
 				shmem_dir_unmap(dir);
 				goto found;
 			}
+			shmem_swp_unmap(ptr);
 		}
 	}
 lost1:
@@ -927,8 +930,7 @@ lost2:
 	return 0;
 found:
 	idx += offset;
-	inode = igrab(&info->vfs_inode);
-	spin_unlock(&info->lock);
+	ptr += offset;
 
 	/*
 	 * Move _head_ to start search for next from here.
@@ -939,37 +941,18 @@ found:
 	 */
 	if (shmem_swaplist.next != &info->swaplist)
 		list_move_tail(&shmem_swaplist, &info->swaplist);
-	mutex_unlock(&shmem_swaplist_mutex);
 
-	error = 1;
-	if (!inode)
-		goto out;
 	/*
-	 * Charge page using GFP_KERNEL while we can wait.
-	 * Charged back to the user(not to caller) when swap account is used.
-	 * add_to_page_cache() will be called with GFP_NOWAIT.
+	 * We rely on shmem_swaplist_mutex, not only to protect the swaplist,
+	 * but also to hold up shmem_evict_inode(): so inode cannot be freed
+	 * beneath us (pagelock doesn't help until the page is in pagecache).
 	 */
-	error = mem_cgroup_cache_charge(page, current->mm, GFP_KERNEL);
-	if (error)
-		goto out;
-	error = radix_tree_preload(GFP_KERNEL);
-	if (error) {
-		mem_cgroup_uncharge_cache_page(page);
-		goto out;
-	}
-	error = 1;
-
-	spin_lock(&info->lock);
-	ptr = shmem_swp_entry(info, idx, NULL);
-	if (ptr && ptr->val == entry.val) {
-		error = add_to_page_cache_locked(page, inode->i_mapping,
-						idx, GFP_NOWAIT);
-		/* does mem_cgroup_uncharge_cache_page on error */
-	} else	/* we must compensate for our precharge above */
-		mem_cgroup_uncharge_cache_page(page);
+	mapping = info->vfs_inode.i_mapping;
+	error = add_to_page_cache_locked(page, mapping, idx, GFP_NOWAIT);
+	/* which does mem_cgroup_uncharge_cache_page on error */
 
 	if (error == -EEXIST) {
-		struct page *filepage = find_get_page(inode->i_mapping, idx);
+		struct page *filepage = find_get_page(mapping, idx);
 		error = 1;
 		if (filepage) {
 			/*
@@ -989,14 +972,8 @@ found:
 		swap_free(entry);
 		error = 1;	/* not an error, but entry was found */
 	}
-	if (ptr)
-		shmem_swp_unmap(ptr);
+	shmem_swp_unmap(ptr);
 	spin_unlock(&info->lock);
-	radix_tree_preload_end();
-out:
-	unlock_page(page);
-	page_cache_release(page);
-	iput(inode);		/* allows for NULL */
 	return error;
 }
 
@@ -1008,6 +985,26 @@ int shmem_unuse(swp_entry_t entry, struct page *page)
 	struct list_head *p, *next;
 	struct shmem_inode_info *info;
 	int found = 0;
+	int error;
+
+	/*
+	 * Charge page using GFP_KERNEL while we can wait, before taking
+	 * the shmem_swaplist_mutex which might hold up shmem_writepage().
+	 * Charged back to the user (not to caller) when swap account is used.
+	 * add_to_page_cache() will be called with GFP_NOWAIT.
+	 */
+	error = mem_cgroup_cache_charge(page, current->mm, GFP_KERNEL);
+	if (error)
+		goto out;
+	/*
+	 * Try to preload while we can wait, to not make a habit of
+	 * draining atomic reserves; but don't latch on to this cpu,
+	 * it's okay if sometimes we get rescheduled after this.
+	 */
+	error = radix_tree_preload(GFP_KERNEL);
+	if (error)
+		goto uncharge;
+	radix_tree_preload_end();
 
 	mutex_lock(&shmem_swaplist_mutex);
 	list_for_each_safe(p, next, &shmem_swaplist) {
@@ -1015,17 +1012,19 @@ int shmem_unuse(swp_entry_t entry, struct page *page)
 		found = shmem_unuse_inode(info, entry, page);
 		cond_resched();
 		if (found)
-			goto out;
+			break;
 	}
 	mutex_unlock(&shmem_swaplist_mutex);
-	/*
-	 * Can some race bring us here?  We've been holding page lock,
-	 * so I think not; but would rather try again later than BUG()
-	 */
+
+uncharge:
+	if (!found)
+		mem_cgroup_uncharge_cache_page(page);
+	if (found < 0)
+		error = found;
+out:
 	unlock_page(page);
 	page_cache_release(page);
-out:
-	return (found < 0) ? found : 0;
+	return error;
 }
 
 /*
@@ -1063,7 +1062,25 @@ static int shmem_writepage(struct page *page, struct writeback_control *wbc)
 	else
 		swap.val = 0;
 
+	/*
+	 * Add inode to shmem_unuse()'s list of swapped-out inodes,
+	 * if it's not already there.  Do it now because we cannot take
+	 * mutex while holding spinlock, and must do so before the page
+	 * is moved to swap cache, when its pagelock no longer protects
+	 * the inode from eviction.  But don't unlock the mutex until
+	 * we've taken the spinlock, because shmem_unuse_inode() will
+	 * prune a !swapped inode from the swaplist under both locks.
+	 */
+	if (swap.val) {
+		mutex_lock(&shmem_swaplist_mutex);
+		if (list_empty(&info->swaplist))
+			list_add_tail(&info->swaplist, &shmem_swaplist);
+	}
+
 	spin_lock(&info->lock);
+	if (swap.val)
+		mutex_unlock(&shmem_swaplist_mutex);
+
 	if (index >= info->next_index) {
 		BUG_ON(!(info->flags & SHMEM_TRUNCATE));
 		goto unlock;
@@ -1083,21 +1100,10 @@ static int shmem_writepage(struct page *page, struct writeback_control *wbc)
 		delete_from_page_cache(page);
 		shmem_swp_set(info, entry, swap.val);
 		shmem_swp_unmap(entry);
-		if (list_empty(&info->swaplist))
-			inode = igrab(inode);
-		else
-			inode = NULL;
 		spin_unlock(&info->lock);
 		swap_shmem_alloc(swap);
 		BUG_ON(page_mapped(page));
 		swap_writepage(page, wbc);
-		if (inode) {
-			mutex_lock(&shmem_swaplist_mutex);
-			/* move instead of add in case we're racing */
-			list_move_tail(&info->swaplist, &shmem_swaplist);
-			mutex_unlock(&shmem_swaplist_mutex);
-			iput(inode);
-		}
 		return 0;
 	}
 
@@ -1397,21 +1403,16 @@ repeat:
 		shmem_swp_unmap(entry);
 		sbinfo = SHMEM_SB(inode->i_sb);
 		if (sbinfo->max_blocks) {
-			if ((percpu_counter_compare(&sbinfo->used_blocks, sbinfo->max_blocks) > 0) ||
-			    shmem_acct_block(info->flags)) {
-				spin_unlock(&info->lock);
-				error = -ENOSPC;
-				goto failed;
-			}
+			if (percpu_counter_compare(&sbinfo->used_blocks,
+						sbinfo->max_blocks) >= 0 ||
+			    shmem_acct_block(info->flags))
+				goto nospace;
 			percpu_counter_inc(&sbinfo->used_blocks);
 			spin_lock(&inode->i_lock);
 			inode->i_blocks += BLOCKS_PER_PAGE;
 			spin_unlock(&inode->i_lock);
-		} else if (shmem_acct_block(info->flags)) {
-			spin_unlock(&info->lock);
-			error = -ENOSPC;
-			goto failed;
-		}
+		} else if (shmem_acct_block(info->flags))
+			goto nospace;
 
 		if (!filepage) {
 			int ret;
@@ -1491,6 +1492,24 @@ done:
 	error = 0;
 	goto out;
 
+nospace:
+	/*
+	 * Perhaps the page was brought in from swap between find_lock_page
+	 * and taking info->lock?  We allow for that at add_to_page_cache_lru,
+	 * but must also avoid reporting a spurious ENOSPC while working on a
+	 * full tmpfs.  (When filepage has been passed in to shmem_getpage, it
+	 * is already in page cache, which prevents this race from occurring.)
+	 */
+	if (!filepage) {
+		struct page *page = find_get_page(mapping, idx);
+		if (page) {
+			spin_unlock(&info->lock);
+			page_cache_release(page);
+			goto repeat;
+		}
+	}
+	spin_unlock(&info->lock);
+	error = -ENOSPC;
 failed:
 	if (*pagep != filepage) {
 		unlock_page(filepage);
diff --git a/mm/slab.c b/mm/slab.c
index 568803f121a..bcfa4987c8a 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -115,6 +115,7 @@
 #include	<linux/debugobjects.h>
 #include	<linux/kmemcheck.h>
 #include	<linux/memory.h>
+#include	<linux/prefetch.h>
 
 #include	<asm/cacheflush.h>
 #include	<asm/tlbflush.h>
@@ -878,7 +879,7 @@ static struct array_cache *alloc_arraycache(int node, int entries,
 	nc = kmalloc_node(memsize, gfp, node);
 	/*
 	 * The array_cache structures contain pointers to free object.
-	 * However, when such objects are allocated or transfered to another
+	 * However, when such objects are allocated or transferred to another
 	 * cache the pointers are not cleared and they could be counted as
 	 * valid references during a kmemleak scan. Therefore, kmemleak must
 	 * not scan such objects.
@@ -2606,7 +2607,7 @@ EXPORT_SYMBOL(kmem_cache_shrink);
  *
  * The cache must be empty before calling this function.
  *
- * The caller must guarantee that noone will allocate memory from the cache
+ * The caller must guarantee that no one will allocate memory from the cache
  * during the kmem_cache_destroy().
  */
 void kmem_cache_destroy(struct kmem_cache *cachep)
diff --git a/mm/slub.c b/mm/slub.c
index f881874843a..9d2e5e46bf0 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -64,7 +64,7 @@
  *   we must stay away from it for a while since we may cause a bouncing
  *   cacheline if we try to acquire the lock. So go onto the next slab.
  *   If all pages are busy then we may allocate a new slab instead of reusing
- *   a partial slab. A new slab has noone operating on it and thus there is
+ *   a partial slab. A new slab has no one operating on it and thus there is
  *   no danger of cacheline contention.
  *
  *   Interrupts are disabled during allocation and deallocation in order to
@@ -1929,7 +1929,7 @@ redo:
 	else {
 #ifdef CONFIG_CMPXCHG_LOCAL
 		/*
-		 * The cmpxchg will only match if there was no additonal
+		 * The cmpxchg will only match if there was no additional
 		 * operation and if we are on the right processor.
 		 *
 		 * The cmpxchg does the following atomically (without lock semantics!)
@@ -1940,7 +1940,7 @@ redo:
 		 * Since this is without lock semantics the protection is only against
 		 * code executing on this cpu *not* from access by other cpus.
 		 */
-		if (unlikely(!this_cpu_cmpxchg_double(
+		if (unlikely(!irqsafe_cpu_cmpxchg_double(
 				s->cpu_slab->freelist, s->cpu_slab->tid,
 				object, tid,
 				get_freepointer(s, object), next_tid(tid)))) {
@@ -2145,7 +2145,7 @@ redo:
 		set_freepointer(s, object, c->freelist);
 
 #ifdef CONFIG_CMPXCHG_LOCAL
-		if (unlikely(!this_cpu_cmpxchg_double(
+		if (unlikely(!irqsafe_cpu_cmpxchg_double(
 				s->cpu_slab->freelist, s->cpu_slab->tid,
 				c->freelist, tid,
 				object, next_tid(tid)))) {
@@ -3547,7 +3547,7 @@ void *__kmalloc_track_caller(size_t size, gfp_t gfpflags, unsigned long caller)
 
 	ret = slab_alloc(s, gfpflags, NUMA_NO_NODE, caller);
 
-	/* Honor the call site pointer we recieved. */
+	/* Honor the call site pointer we received. */
 	trace_kmalloc(caller, ret, size, s->size, gfpflags);
 
 	return ret;
@@ -3577,7 +3577,7 @@ void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
 
 	ret = slab_alloc(s, gfpflags, node, caller);
 
-	/* Honor the call site pointer we recieved. */
+	/* Honor the call site pointer we received. */
 	trace_kmalloc_node(caller, ret, size, s->size, gfpflags, node);
 
 	return ret;
diff --git a/mm/sparse.c b/mm/sparse.c
index 93250207c5c..aa64b12831a 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -500,7 +500,7 @@ void __init sparse_init(void)
 	 * so alloc 2M (with 2M align) and 24 bytes in turn will
 	 * make next 2M slip to one more 2M later.
 	 * then in big system, the memory will have a lot of holes...
-	 * here try to allocate 2M pages continously.
+	 * here try to allocate 2M pages continuously.
 	 *
 	 * powerpc need to call sparse_init_one_section right after each
 	 * sparse_early_mem_map_alloc, so allocate usemap_map at first.
diff --git a/mm/swap.c b/mm/swap.c
index a448db377cb..5602f1a1b1e 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -396,6 +396,9 @@ static void lru_deactivate_fn(struct page *page, void *arg)
 	if (!PageLRU(page))
 		return;
 
+	if (PageUnevictable(page))
+		return;
+
 	/* Some processes are using the page */
 	if (page_mapped(page))
 		return;
diff --git a/mm/util.c b/mm/util.c
index f126975ef23..e7b103a6fd2 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -227,7 +227,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 /*
  * Like get_user_pages_fast() except its IRQ-safe in that it won't fall
  * back to the regular GUP.
- * If the architecture not support this fucntion, simply return with no
+ * If the architecture not support this function, simply return with no
  * page pinned
  */
 int __attribute__((weak)) __get_user_pages_fast(unsigned long start,
diff --git a/mm/vmscan.c b/mm/vmscan.c
index f73b8657c2d..c9177202c8c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -41,6 +41,8 @@
 #include <linux/memcontrol.h>
 #include <linux/delayacct.h>
 #include <linux/sysctl.h>
+#include <linux/oom.h>
+#include <linux/prefetch.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>
@@ -936,7 +938,7 @@ keep_lumpy:
 	 * back off and wait for congestion to clear because further reclaim
 	 * will encounter the same problem
 	 */
-	if (nr_dirty == nr_congested && nr_dirty != 0)
+	if (nr_dirty && nr_dirty == nr_congested && scanning_global_lru(sc))
 		zone_set_flag(zone, ZONE_CONGESTED);
 
 	free_page_list(&free_pages);
@@ -1065,7 +1067,7 @@ static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
 		 * surrounding the tag page.  Only take those pages of
 		 * the same active state as that tag page.  We may safely
 		 * round the target page pfn down to the requested order
-		 * as the mem_map is guarenteed valid out to MAX_ORDER,
+		 * as the mem_map is guaranteed valid out to MAX_ORDER,
 		 * where that page is in a different zone we will detect
 		 * it from its zone id and abort this block scan.
 		 */
@@ -1988,17 +1990,12 @@ static bool zone_reclaimable(struct zone *zone)
 	return zone->pages_scanned < zone_reclaimable_pages(zone) * 6;
 }
 
-/*
- * As hibernation is going on, kswapd is freezed so that it can't mark
- * the zone into all_unreclaimable. It can't handle OOM during hibernation.
- * So let's check zone's unreclaimable in direct reclaim as well as kswapd.
- */
+/* All zones in zonelist are unreclaimable? */
 static bool all_unreclaimable(struct zonelist *zonelist,
 		struct scan_control *sc)
 {
 	struct zoneref *z;
 	struct zone *zone;
-	bool all_unreclaimable = true;
 
 	for_each_zone_zonelist_nodemask(zone, z, zonelist,
 			gfp_zone(sc->gfp_mask), sc->nodemask) {
@@ -2006,13 +2003,11 @@ static bool all_unreclaimable(struct zonelist *zonelist,
 			continue;
 		if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
 			continue;
-		if (zone_reclaimable(zone)) {
-			all_unreclaimable = false;
-			break;
-		}
+		if (!zone->all_unreclaimable)
+			return false;
 	}
 
-	return all_unreclaimable;
+	return true;
 }
 
 /*
@@ -2108,6 +2103,14 @@ out:
 	if (sc->nr_reclaimed)
 		return sc->nr_reclaimed;
 
+	/*
+	 * As hibernation is going on, kswapd is freezed so that it can't mark
+	 * the zone into all_unreclaimable. Thus bypassing all_unreclaimable
+	 * check.
+	 */
+	if (oom_killer_disabled)
+		return 0;
+
 	/* top priority shrink_zones still had more to do? don't OOM, then */
 	if (scanning_global_lru(sc) && !all_unreclaimable(zonelist, sc))
 		return 1;
@@ -2224,7 +2227,7 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
  *   o a 16M DMA zone that is balanced will not balance a zone on any
  *     reasonable sized machine
  *   o On all other machines, the top zone must be at least a reasonable
- *     precentage of the middle zones. For example, on 32-bit x86, highmem
+ *     percentage of the middle zones. For example, on 32-bit x86, highmem
  *     would need to be at least 256M for it to be balance a whole node.
  *     Similarly, on x86-64 the Normal zone would need to be at least 1G
  *     to balance a node on its own. These seemed like reasonable ratios.
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 772b39b87d9..897ea9e8823 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -321,9 +321,12 @@ static inline void mod_state(struct zone *zone,
 		/*
 		 * The fetching of the stat_threshold is racy. We may apply
 		 * a counter threshold to the wrong the cpu if we get
-		 * rescheduled while executing here. However, the following
-		 * will apply the threshold again and therefore bring the
-		 * counter under the threshold.
+		 * rescheduled while executing here. However, the next
+		 * counter update will apply the threshold again and
+		 * therefore bring the counter under the threshold again.
+		 *
+		 * Most of the time the thresholds are the same anyways
+		 * for all cpus in a zone.
 		 */
 		t = this_cpu_read(pcp->stat_threshold);
 
@@ -945,7 +948,16 @@ static const char * const vmstat_text[] = {
 	"unevictable_pgs_cleared",
 	"unevictable_pgs_stranded",
 	"unevictable_pgs_mlockfreed",
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	"thp_fault_alloc",
+	"thp_fault_fallback",
+	"thp_collapse_alloc",
+	"thp_collapse_alloc_failed",
+	"thp_split",
 #endif
+
+#endif /* CONFIG_VM_EVENTS_COUNTERS */
 };
 
 static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
diff --git a/net/802/garp.c b/net/802/garp.c
index c1df2dad8c6..f8300a8b5fb 100644
--- a/net/802/garp.c
+++ b/net/802/garp.c
@@ -544,6 +544,11 @@ static int garp_init_port(struct net_device *dev)
 	return 0;
 }
 
+static void garp_kfree_rcu(struct rcu_head *head)
+{
+	kfree(container_of(head, struct garp_port, rcu));
+}
+
 static void garp_release_port(struct net_device *dev)
 {
 	struct garp_port *port = rtnl_dereference(dev->garp_port);
@@ -554,8 +559,7 @@ static void garp_release_port(struct net_device *dev)
 			return;
 	}
 	rcu_assign_pointer(dev->garp_port, NULL);
-	synchronize_rcu();
-	kfree(port);
+	call_rcu(&port->rcu, garp_kfree_rcu);
 }
 
 int garp_init_applicant(struct net_device *dev, struct garp_application *appl)
@@ -599,6 +603,11 @@ err1:
 }
 EXPORT_SYMBOL_GPL(garp_init_applicant);
 
+static void garp_app_kfree_rcu(struct rcu_head *head)
+{
+	kfree(container_of(head, struct garp_applicant, rcu));
+}
+
 void garp_uninit_applicant(struct net_device *dev, struct garp_application *appl)
 {
 	struct garp_port *port = rtnl_dereference(dev->garp_port);
@@ -607,7 +616,6 @@ void garp_uninit_applicant(struct net_device *dev, struct garp_application *appl
 	ASSERT_RTNL();
 
 	rcu_assign_pointer(port->applicants[appl->type], NULL);
-	synchronize_rcu();
 
 	/* Delete timer and generate a final TRANSMIT_PDU event to flush out
 	 * all pending messages before the applicant is gone. */
@@ -617,7 +625,7 @@ void garp_uninit_applicant(struct net_device *dev, struct garp_application *appl
 	garp_queue_xmit(app);
 
 	dev_mc_del(dev, appl->proto.group_address);
-	kfree(app);
+	call_rcu(&app->rcu, garp_app_kfree_rcu);
 	garp_release_port(dev);
 }
 EXPORT_SYMBOL_GPL(garp_uninit_applicant);
@@ -635,3 +643,9 @@ void garp_unregister_application(struct garp_application *appl)
 	stp_proto_unregister(&appl->proto);
 }
 EXPORT_SYMBOL_GPL(garp_unregister_application);
+
+static void __exit garp_cleanup_module(void)
+{
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
+}
+module_exit(garp_cleanup_module);
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 7850412f52b..b2274d1fd60 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -49,11 +49,6 @@ const char vlan_version[] = DRV_VERSION;
 static const char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>";
 static const char vlan_buggyright[] = "David S. Miller <davem@redhat.com>";
 
-static struct packet_type vlan_packet_type __read_mostly = {
-	.type = cpu_to_be16(ETH_P_8021Q),
-	.func = vlan_skb_recv, /* VLAN receive method */
-};
-
 /* End of global variables definitions. */
 
 static void vlan_group_free(struct vlan_group *grp)
@@ -124,10 +119,14 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head)
 
 	grp->nr_vlans--;
 
-	vlan_group_set_device(grp, vlan_id, NULL);
-	if (!grp->killall)
-		synchronize_net();
+	if (vlan->flags & VLAN_FLAG_GVRP)
+		vlan_gvrp_request_leave(dev);
 
+	vlan_group_set_device(grp, vlan_id, NULL);
+	/* Because unregister_netdevice_queue() makes sure at least one rcu
+	 * grace period is respected before device freeing,
+	 * we dont need to call synchronize_net() here.
+	 */
 	unregister_netdevice_queue(dev, head);
 
 	/* If the group is now empty, kill off the group. */
@@ -327,10 +326,6 @@ static void vlan_sync_address(struct net_device *dev,
 static void vlan_transfer_features(struct net_device *dev,
 				   struct net_device *vlandev)
 {
-	u32 old_features = vlandev->features;
-
-	vlandev->features &= ~dev->vlan_features;
-	vlandev->features |= dev->features & dev->vlan_features;
 	vlandev->gso_max_size = dev->gso_max_size;
 
 	if (dev->features & NETIF_F_HW_VLAN_TX)
@@ -341,8 +336,8 @@ static void vlan_transfer_features(struct net_device *dev,
 #if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
 	vlandev->fcoe_ddp_xid = dev->fcoe_ddp_xid;
 #endif
-	if (old_features != vlandev->features)
-		netdev_features_change(vlandev);
+
+	netdev_update_features(vlandev);
 }
 
 static void __vlan_device_event(struct net_device *dev, unsigned long event)
@@ -487,9 +482,6 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 		if (dev->reg_state != NETREG_UNREGISTERING)
 			break;
 
-		/* Delete all VLANs for this dev. */
-		grp->killall = 1;
-
 		for (i = 0; i < VLAN_N_VID; i++) {
 			vlandev = vlan_group_get_device(grp, i);
 			if (!vlandev)
@@ -508,6 +500,18 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 	case NETDEV_PRE_TYPE_CHANGE:
 		/* Forbid underlaying device to change its type. */
 		return NOTIFY_BAD;
+
+	case NETDEV_NOTIFY_PEERS:
+	case NETDEV_BONDING_FAILOVER:
+		/* Propagate to vlan devices */
+		for (i = 0; i < VLAN_N_VID; i++) {
+			vlandev = vlan_group_get_device(grp, i);
+			if (!vlandev)
+				continue;
+
+			call_netdevice_notifiers(event, vlandev);
+		}
+		break;
 	}
 
 out:
@@ -688,7 +692,6 @@ static int __init vlan_proto_init(void)
 	if (err < 0)
 		goto err4;
 
-	dev_add_pack(&vlan_packet_type);
 	vlan_ioctl_set(vlan_ioctl_handler);
 	return 0;
 
@@ -709,8 +712,6 @@ static void __exit vlan_cleanup_module(void)
 
 	unregister_netdevice_notifier(&vlan_notifier_block);
 
-	dev_remove_pack(&vlan_packet_type);
-
 	unregister_pernet_subsys(&vlan_net_ops);
 	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 5687c9b95f3..c3408def8a1 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -75,8 +75,6 @@ static inline struct vlan_dev_info *vlan_dev_info(const struct net_device *dev)
 }
 
 /* found in vlan_dev.c */
-int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
-		  struct packet_type *ptype, struct net_device *orig_dev);
 void vlan_dev_set_ingress_priority(const struct net_device *dev,
 				   u32 skb_prio, u16 vlan_prio);
 int vlan_dev_set_egress_priority(const struct net_device *dev,
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index ce8e3ab3e7a..41495dc2a4c 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -4,7 +4,7 @@
 #include <linux/netpoll.h>
 #include "vlan.h"
 
-bool vlan_hwaccel_do_receive(struct sk_buff **skbp)
+bool vlan_do_receive(struct sk_buff **skbp)
 {
 	struct sk_buff *skb = *skbp;
 	u16 vlan_id = skb->vlan_tci & VLAN_VID_MASK;
@@ -88,3 +88,86 @@ gro_result_t vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
 	return napi_gro_frags(napi);
 }
 EXPORT_SYMBOL(vlan_gro_frags);
+
+static struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
+{
+	if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
+		if (skb_cow(skb, skb_headroom(skb)) < 0)
+			skb = NULL;
+		if (skb) {
+			/* Lifted from Gleb's VLAN code... */
+			memmove(skb->data - ETH_HLEN,
+				skb->data - VLAN_ETH_HLEN, 12);
+			skb->mac_header += VLAN_HLEN;
+		}
+	}
+	return skb;
+}
+
+static void vlan_set_encap_proto(struct sk_buff *skb, struct vlan_hdr *vhdr)
+{
+	__be16 proto;
+	unsigned char *rawp;
+
+	/*
+	 * Was a VLAN packet, grab the encapsulated protocol, which the layer
+	 * three protocols care about.
+	 */
+
+	proto = vhdr->h_vlan_encapsulated_proto;
+	if (ntohs(proto) >= 1536) {
+		skb->protocol = proto;
+		return;
+	}
+
+	rawp = skb->data;
+	if (*(unsigned short *) rawp == 0xFFFF)
+		/*
+		 * This is a magic hack to spot IPX packets. Older Novell
+		 * breaks the protocol design and runs IPX over 802.3 without
+		 * an 802.2 LLC layer. We look for FFFF which isn't a used
+		 * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
+		 * but does for the rest.
+		 */
+		skb->protocol = htons(ETH_P_802_3);
+	else
+		/*
+		 * Real 802.2 LLC
+		 */
+		skb->protocol = htons(ETH_P_802_2);
+}
+
+struct sk_buff *vlan_untag(struct sk_buff *skb)
+{
+	struct vlan_hdr *vhdr;
+	u16 vlan_tci;
+
+	if (unlikely(vlan_tx_tag_present(skb))) {
+		/* vlan_tci is already set-up so leave this for another time */
+		return skb;
+	}
+
+	skb = skb_share_check(skb, GFP_ATOMIC);
+	if (unlikely(!skb))
+		goto err_free;
+
+	if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
+		goto err_free;
+
+	vhdr = (struct vlan_hdr *) skb->data;
+	vlan_tci = ntohs(vhdr->h_vlan_TCI);
+	__vlan_hwaccel_put_tag(skb, vlan_tci);
+
+	skb_pull_rcsum(skb, VLAN_HLEN);
+	vlan_set_encap_proto(skb, vhdr);
+
+	skb = vlan_check_reorder_header(skb);
+	if (unlikely(!skb))
+		goto err_free;
+
+	return skb;
+
+err_free:
+	kfree_skb(skb);
+	return NULL;
+}
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index e34ea9e5e28..f247f5bff88 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -65,179 +65,6 @@ static int vlan_dev_rebuild_header(struct sk_buff *skb)
 	return 0;
 }
 
-static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
-{
-	if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
-		if (skb_cow(skb, skb_headroom(skb)) < 0)
-			skb = NULL;
-		if (skb) {
-			/* Lifted from Gleb's VLAN code... */
-			memmove(skb->data - ETH_HLEN,
-				skb->data - VLAN_ETH_HLEN, 12);
-			skb->mac_header += VLAN_HLEN;
-		}
-	}
-
-	return skb;
-}
-
-static inline void vlan_set_encap_proto(struct sk_buff *skb,
-		struct vlan_hdr *vhdr)
-{
-	__be16 proto;
-	unsigned char *rawp;
-
-	/*
-	 * Was a VLAN packet, grab the encapsulated protocol, which the layer
-	 * three protocols care about.
-	 */
-
-	proto = vhdr->h_vlan_encapsulated_proto;
-	if (ntohs(proto) >= 1536) {
-		skb->protocol = proto;
-		return;
-	}
-
-	rawp = skb->data;
-	if (*(unsigned short *)rawp == 0xFFFF)
-		/*
-		 * This is a magic hack to spot IPX packets. Older Novell
-		 * breaks the protocol design and runs IPX over 802.3 without
-		 * an 802.2 LLC layer. We look for FFFF which isn't a used
-		 * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
-		 * but does for the rest.
-		 */
-		skb->protocol = htons(ETH_P_802_3);
-	else
-		/*
-		 * Real 802.2 LLC
-		 */
-		skb->protocol = htons(ETH_P_802_2);
-}
-
-/*
- *	Determine the packet's protocol ID. The rule here is that we
- *	assume 802.3 if the type field is short enough to be a length.
- *	This is normal practice and works for any 'now in use' protocol.
- *
- *  Also, at this point we assume that we ARE dealing exclusively with
- *  VLAN packets, or packets that should be made into VLAN packets based
- *  on a default VLAN ID.
- *
- *  NOTE:  Should be similar to ethernet/eth.c.
- *
- *  SANITY NOTE:  This method is called when a packet is moving up the stack
- *                towards userland.  To get here, it would have already passed
- *                through the ethernet/eth.c eth_type_trans() method.
- *  SANITY NOTE 2: We are referencing to the VLAN_HDR frields, which MAY be
- *                 stored UNALIGNED in the memory.  RISC systems don't like
- *                 such cases very much...
- *  SANITY NOTE 2a: According to Dave Miller & Alexey, it will always be
- *  		    aligned, so there doesn't need to be any of the unaligned
- *  		    stuff.  It has been commented out now...  --Ben
- *
- */
-int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
-		  struct packet_type *ptype, struct net_device *orig_dev)
-{
-	struct vlan_hdr *vhdr;
-	struct vlan_pcpu_stats *rx_stats;
-	struct net_device *vlan_dev;
-	u16 vlan_id;
-	u16 vlan_tci;
-
-	skb = skb_share_check(skb, GFP_ATOMIC);
-	if (skb == NULL)
-		goto err_free;
-
-	if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
-		goto err_free;
-
-	vhdr = (struct vlan_hdr *)skb->data;
-	vlan_tci = ntohs(vhdr->h_vlan_TCI);
-	vlan_id = vlan_tci & VLAN_VID_MASK;
-
-	rcu_read_lock();
-	vlan_dev = vlan_find_dev(dev, vlan_id);
-
-	/* If the VLAN device is defined, we use it.
-	 * If not, and the VID is 0, it is a 802.1p packet (not
-	 * really a VLAN), so we will just netif_rx it later to the
-	 * original interface, but with the skb->proto set to the
-	 * wrapped proto: we do nothing here.
-	 */
-
-	if (!vlan_dev) {
-		if (vlan_id) {
-			pr_debug("%s: ERROR: No net_device for VID: %u on dev: %s\n",
-				 __func__, vlan_id, dev->name);
-			goto err_unlock;
-		}
-		rx_stats = NULL;
-	} else {
-		skb->dev = vlan_dev;
-
-		rx_stats = this_cpu_ptr(vlan_dev_info(skb->dev)->vlan_pcpu_stats);
-
-		u64_stats_update_begin(&rx_stats->syncp);
-		rx_stats->rx_packets++;
-		rx_stats->rx_bytes += skb->len;
-
-		skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tci);
-
-		pr_debug("%s: priority: %u for TCI: %hu\n",
-			 __func__, skb->priority, vlan_tci);
-
-		switch (skb->pkt_type) {
-		case PACKET_BROADCAST:
-			/* Yeah, stats collect these together.. */
-			/* stats->broadcast ++; // no such counter :-( */
-			break;
-
-		case PACKET_MULTICAST:
-			rx_stats->rx_multicast++;
-			break;
-
-		case PACKET_OTHERHOST:
-			/* Our lower layer thinks this is not local, let's make
-			 * sure.
-			 * This allows the VLAN to have a different MAC than the
-			 * underlying device, and still route correctly.
-			 */
-			if (!compare_ether_addr(eth_hdr(skb)->h_dest,
-						skb->dev->dev_addr))
-				skb->pkt_type = PACKET_HOST;
-			break;
-		default:
-			break;
-		}
-		u64_stats_update_end(&rx_stats->syncp);
-	}
-
-	skb_pull_rcsum(skb, VLAN_HLEN);
-	vlan_set_encap_proto(skb, vhdr);
-
-	if (vlan_dev) {
-		skb = vlan_check_reorder_header(skb);
-		if (!skb) {
-			rx_stats->rx_errors++;
-			goto err_unlock;
-		}
-	}
-
-	netif_rx(skb);
-
-	rcu_read_unlock();
-	return NET_RX_SUCCESS;
-
-err_unlock:
-	rcu_read_unlock();
-err_free:
-	atomic_long_inc(&dev->rx_dropped);
-	kfree_skb(skb);
-	return NET_RX_DROP;
-}
-
 static inline u16
 vlan_dev_get_egress_qos_mask(struct net_device *dev, struct sk_buff *skb)
 {
@@ -487,9 +314,6 @@ static int vlan_dev_stop(struct net_device *dev)
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	struct net_device *real_dev = vlan->real_dev;
 
-	if (vlan->flags & VLAN_FLAG_GVRP)
-		vlan_gvrp_request_leave(dev);
-
 	dev_mc_unsync(real_dev, dev);
 	dev_uc_unsync(real_dev, dev);
 	if (dev->flags & IFF_ALLMULTI)
@@ -704,8 +528,8 @@ static int vlan_dev_init(struct net_device *dev)
 					  (1<<__LINK_STATE_DORMANT))) |
 		      (1<<__LINK_STATE_PRESENT);
 
-	dev->features |= real_dev->features & real_dev->vlan_features;
-	dev->features |= NETIF_F_LLTX;
+	dev->hw_features = NETIF_F_ALL_TX_OFFLOADS;
+	dev->features |= real_dev->vlan_features | NETIF_F_LLTX;
 	dev->gso_max_size = real_dev->gso_max_size;
 
 	/* ipv6 shared card related stuff */
@@ -759,6 +583,19 @@ static void vlan_dev_uninit(struct net_device *dev)
 	}
 }
 
+static u32 vlan_dev_fix_features(struct net_device *dev, u32 features)
+{
+	struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+
+	features &= real_dev->features;
+	features &= real_dev->vlan_features;
+	if (dev_ethtool_get_rx_csum(real_dev))
+		features |= NETIF_F_RXCSUM;
+	features |= NETIF_F_LLTX;
+
+	return features;
+}
+
 static int vlan_ethtool_get_settings(struct net_device *dev,
 				     struct ethtool_cmd *cmd)
 {
@@ -774,18 +611,6 @@ static void vlan_ethtool_get_drvinfo(struct net_device *dev,
 	strcpy(info->fw_version, "N/A");
 }
 
-static u32 vlan_ethtool_get_rx_csum(struct net_device *dev)
-{
-	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
-	return dev_ethtool_get_rx_csum(vlan->real_dev);
-}
-
-static u32 vlan_ethtool_get_flags(struct net_device *dev)
-{
-	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
-	return dev_ethtool_get_flags(vlan->real_dev);
-}
-
 static struct rtnl_link_stats64 *vlan_dev_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 {
 
@@ -823,32 +648,10 @@ static struct rtnl_link_stats64 *vlan_dev_get_stats64(struct net_device *dev, st
 	return stats;
 }
 
-static int vlan_ethtool_set_tso(struct net_device *dev, u32 data)
-{
-       if (data) {
-		struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
-
-		/* Underlying device must support TSO for VLAN-tagged packets
-		 * and must have TSO enabled now.
-		 */
-		if (!(real_dev->vlan_features & NETIF_F_TSO))
-			return -EOPNOTSUPP;
-		if (!(real_dev->features & NETIF_F_TSO))
-			return -EINVAL;
-		dev->features |= NETIF_F_TSO;
-	} else {
-		dev->features &= ~NETIF_F_TSO;
-	}
-	return 0;
-}
-
 static const struct ethtool_ops vlan_ethtool_ops = {
 	.get_settings	        = vlan_ethtool_get_settings,
 	.get_drvinfo	        = vlan_ethtool_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
-	.get_rx_csum		= vlan_ethtool_get_rx_csum,
-	.get_flags		= vlan_ethtool_get_flags,
-	.set_tso                = vlan_ethtool_set_tso,
 };
 
 static const struct net_device_ops vlan_netdev_ops = {
@@ -874,6 +677,7 @@ static const struct net_device_ops vlan_netdev_ops = {
 	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
 	.ndo_fcoe_ddp_target	= vlan_dev_fcoe_ddp_target,
 #endif
+	.ndo_fix_features	= vlan_dev_fix_features,
 };
 
 void vlan_setup(struct net_device *dev)
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index d1314cf18ad..d940c49d168 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -54,7 +54,7 @@ static const char name_conf[]	 = "config";
 
 /*
  *	Structures for interfacing with the /proc filesystem.
- *	VLAN creates its own directory /proc/net/vlan with the folowing
+ *	VLAN creates its own directory /proc/net/vlan with the following
  *	entries:
  *	config		device status/configuration
  *	<device>	entry for each  device
diff --git a/net/9p/client.c b/net/9p/client.c
index 2ccbf04d37d..ceab943dfc4 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -178,7 +178,7 @@ free_and_return:
  * @tag: numeric id for transaction
  *
  * this is a simple array lookup, but will grow the
- * request_slots as necessary to accomodate transaction
+ * request_slots as necessary to accommodate transaction
  * ids which did not previously have a slot.
  *
  * this code relies on the client spinlock to manage locks, its
@@ -614,7 +614,7 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...)
 
 	err = c->trans_mod->request(c, req);
 	if (err < 0) {
-		if (err != -ERESTARTSYS)
+		if (err != -ERESTARTSYS && err != -EFAULT)
 			c->status = Disconnected;
 		goto reterr;
 	}
@@ -929,15 +929,15 @@ error:
 }
 EXPORT_SYMBOL(p9_client_attach);
 
-struct p9_fid *p9_client_walk(struct p9_fid *oldfid, int nwname, char **wnames,
-	int clone)
+struct p9_fid *p9_client_walk(struct p9_fid *oldfid, uint16_t nwname,
+		char **wnames, int clone)
 {
 	int err;
 	struct p9_client *clnt;
 	struct p9_fid *fid;
 	struct p9_qid *wqids;
 	struct p9_req_t *req;
-	int16_t nwqids, count;
+	uint16_t nwqids, count;
 
 	err = 0;
 	wqids = NULL;
@@ -955,7 +955,7 @@ struct p9_fid *p9_client_walk(struct p9_fid *oldfid, int nwname, char **wnames,
 		fid = oldfid;
 
 
-	P9_DPRINTK(P9_DEBUG_9P, ">>> TWALK fids %d,%d nwname %d wname[0] %s\n",
+	P9_DPRINTK(P9_DEBUG_9P, ">>> TWALK fids %d,%d nwname %ud wname[0] %s\n",
 		oldfid->fid, fid->fid, nwname, wnames ? wnames[0] : NULL);
 
 	req = p9_client_rpc(clnt, P9_TWALK, "ddT", oldfid->fid, fid->fid,
@@ -1220,27 +1220,6 @@ error:
 }
 EXPORT_SYMBOL(p9_client_fsync);
 
-int p9_client_sync_fs(struct p9_fid *fid)
-{
-	int err = 0;
-	struct p9_req_t *req;
-	struct p9_client *clnt;
-
-	P9_DPRINTK(P9_DEBUG_9P, ">>> TSYNC_FS fid %d\n", fid->fid);
-
-	clnt = fid->clnt;
-	req = p9_client_rpc(clnt, P9_TSYNCFS, "d", fid->fid);
-	if (IS_ERR(req)) {
-		err = PTR_ERR(req);
-		goto error;
-	}
-	P9_DPRINTK(P9_DEBUG_9P, "<<< RSYNCFS fid %d\n", fid->fid);
-	p9_free_req(clnt, req);
-error:
-	return err;
-}
-EXPORT_SYMBOL(p9_client_sync_fs);
-
 int p9_client_clunk(struct p9_fid *fid)
 {
 	int err;
@@ -1302,7 +1281,7 @@ int
 p9_client_read(struct p9_fid *fid, char *data, char __user *udata, u64 offset,
 								u32 count)
 {
-	int err, rsize, total;
+	int err, rsize;
 	struct p9_client *clnt;
 	struct p9_req_t *req;
 	char *dataptr;
@@ -1311,7 +1290,6 @@ p9_client_read(struct p9_fid *fid, char *data, char __user *udata, u64 offset,
 					(long long unsigned) offset, count);
 	err = 0;
 	clnt = fid->clnt;
-	total = 0;
 
 	rsize = fid->iounit;
 	if (!rsize || rsize > clnt->msize-P9_IOHDRSZ)
@@ -1367,7 +1345,7 @@ int
 p9_client_write(struct p9_fid *fid, char *data, const char __user *udata,
 							u64 offset, u32 count)
 {
-	int err, rsize, total;
+	int err, rsize;
 	struct p9_client *clnt;
 	struct p9_req_t *req;
 
@@ -1375,7 +1353,6 @@ p9_client_write(struct p9_fid *fid, char *data, const char __user *udata,
 				fid->fid, (long long unsigned) offset, count);
 	err = 0;
 	clnt = fid->clnt;
-	total = 0;
 
 	rsize = fid->iounit;
 	if (!rsize || rsize > clnt->msize-P9_IOHDRSZ)
@@ -1766,7 +1743,7 @@ EXPORT_SYMBOL_GPL(p9_client_xattrcreate);
 
 int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset)
 {
-	int err, rsize, total;
+	int err, rsize;
 	struct p9_client *clnt;
 	struct p9_req_t *req;
 	char *dataptr;
@@ -1776,7 +1753,6 @@ int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset)
 
 	err = 0;
 	clnt = fid->clnt;
-	total = 0;
 
 	rsize = fid->iounit;
 	if (!rsize || rsize > clnt->msize-P9_READDIRHDRSZ)
diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index 8a4084fa8b5..a873277cb99 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -265,7 +265,7 @@ p9pdu_vreadf(struct p9_fcall *pdu, int proto_version, const char *fmt,
 			}
 			break;
 		case 'T':{
-				int16_t *nwname = va_arg(ap, int16_t *);
+				uint16_t *nwname = va_arg(ap, uint16_t *);
 				char ***wnames = va_arg(ap, char ***);
 
 				errcode = p9pdu_readf(pdu, proto_version,
@@ -468,7 +468,8 @@ p9pdu_vwritef(struct p9_fcall *pdu, int proto_version, const char *fmt,
 		case 'E':{
 				 int32_t cnt = va_arg(ap, int32_t);
 				 const char *k = va_arg(ap, const void *);
-				 const char *u = va_arg(ap, const void *);
+				 const char __user *u = va_arg(ap,
+							const void __user *);
 				 errcode = p9pdu_writef(pdu, proto_version, "d",
 						 cnt);
 				 if (!errcode && pdu_write_urw(pdu, k, u, cnt))
@@ -495,7 +496,7 @@ p9pdu_vwritef(struct p9_fcall *pdu, int proto_version, const char *fmt,
 			}
 			break;
 		case 'T':{
-				int16_t nwname = va_arg(ap, int);
+				uint16_t nwname = va_arg(ap, int);
 				const char **wnames = va_arg(ap, const char **);
 
 				errcode = p9pdu_writef(pdu, proto_version, "w",
@@ -673,6 +674,7 @@ int p9dirent_read(char *buf, int len, struct p9_dirent *dirent,
 	}
 
 	strcpy(dirent->d_name, nameptr);
+	kfree(nameptr);
 
 out:
 	return fake_pdu.offset;
diff --git a/net/9p/trans_common.c b/net/9p/trans_common.c
index 9172ab78fcb..9a70ebdec56 100644
--- a/net/9p/trans_common.c
+++ b/net/9p/trans_common.c
@@ -36,7 +36,7 @@ p9_release_req_pages(struct trans_rpage_info *rpinfo)
 EXPORT_SYMBOL(p9_release_req_pages);
 
 /**
- * p9_nr_pages - Return number of pages needed to accomodate the payload.
+ * p9_nr_pages - Return number of pages needed to accommodate the payload.
  */
 int
 p9_nr_pages(struct p9_req_t *req)
@@ -55,7 +55,7 @@ EXPORT_SYMBOL(p9_nr_pages);
  * @req: Request to be sent to server.
  * @pdata_off: data offset into the first page after translation (gup).
  * @pdata_len: Total length of the IO. gup may not return requested # of pages.
- * @nr_pages: number of pages to accomodate the payload
+ * @nr_pages: number of pages to accommodate the payload
  * @rw: Indicates if the pages are for read or write.
  */
 int
@@ -63,10 +63,10 @@ p9_payload_gup(struct p9_req_t *req, size_t *pdata_off, int *pdata_len,
 		int nr_pages, u8 rw)
 {
 	uint32_t first_page_bytes = 0;
-	uint32_t pdata_mapped_pages;
+	int32_t pdata_mapped_pages;
 	struct trans_rpage_info  *rpinfo;
 
-	*pdata_off = (size_t)req->tc->pubuf & (PAGE_SIZE-1);
+	*pdata_off = (__force size_t)req->tc->pubuf & (PAGE_SIZE-1);
 
 	if (*pdata_off)
 		first_page_bytes = min(((size_t)PAGE_SIZE - *pdata_off),
@@ -75,14 +75,9 @@ p9_payload_gup(struct p9_req_t *req, size_t *pdata_off, int *pdata_len,
 	rpinfo = req->tc->private;
 	pdata_mapped_pages = get_user_pages_fast((unsigned long)req->tc->pubuf,
 			nr_pages, rw, &rpinfo->rp_data[0]);
+	if (pdata_mapped_pages <= 0)
+		return pdata_mapped_pages;
 
-	if (pdata_mapped_pages < 0) {
-		printk(KERN_ERR "get_user_pages_fast failed:%d udata:%p"
-				"nr_pages:%d\n", pdata_mapped_pages,
-				req->tc->pubuf, nr_pages);
-		pdata_mapped_pages = 0;
-		return -EIO;
-	}
 	rpinfo->rp_nr_pages = pdata_mapped_pages;
 	if (*pdata_off) {
 		*pdata_len = first_page_bytes;
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index aa5672b15ea..4a9084395d3 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -716,7 +716,6 @@ static int parse_opts(char *params, struct p9_fd_opts *opts)
 	substring_t args[MAX_OPT_ARGS];
 	int option;
 	char *options, *tmp_options;
-	int ret;
 
 	opts->port = P9_PORT;
 	opts->rfd = ~0;
@@ -744,7 +743,6 @@ static int parse_opts(char *params, struct p9_fd_opts *opts)
 			if (r < 0) {
 				P9_DPRINTK(P9_DEBUG_ERROR,
 				"integer field, but no integer?\n");
-				ret = r;
 				continue;
 			}
 		}
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 150e0c4bbf4..844a7a5607e 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -167,7 +167,6 @@ static int parse_opts(char *params, struct p9_rdma_opts *opts)
 	substring_t args[MAX_OPT_ARGS];
 	int option;
 	char *options, *tmp_options;
-	int ret;
 
 	opts->port = P9_PORT;
 	opts->sq_depth = P9_RDMA_SQ_DEPTH;
@@ -195,7 +194,6 @@ static int parse_opts(char *params, struct p9_rdma_opts *opts)
 		if (r < 0) {
 			P9_DPRINTK(P9_DEBUG_ERROR,
 				   "integer field, but no integer?\n");
-			ret = r;
 			continue;
 		}
 		switch (token) {
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index e8f046b0718..244e7074218 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -326,8 +326,11 @@ req_retry_pinned:
 			outp = pack_sg_list_p(chan->sg, out, VIRTQUEUE_NUM,
 					pdata_off, rpinfo->rp_data, pdata_len);
 		} else {
-			char *pbuf = req->tc->pubuf ? req->tc->pubuf :
-								req->tc->pkbuf;
+			char *pbuf;
+			if (req->tc->pubuf)
+				pbuf = (__force char *) req->tc->pubuf;
+			else
+				pbuf = req->tc->pkbuf;
 			outp = pack_sg_list(chan->sg, out, VIRTQUEUE_NUM, pbuf,
 					req->tc->pbuf_size);
 		}
@@ -352,8 +355,12 @@ req_retry_pinned:
 			in = pack_sg_list_p(chan->sg, out+inp, VIRTQUEUE_NUM,
 					pdata_off, rpinfo->rp_data, pdata_len);
 		} else {
-			char *pbuf = req->tc->pubuf ? req->tc->pubuf :
-								req->tc->pkbuf;
+			char *pbuf;
+			if (req->tc->pubuf)
+				pbuf = (__force char *) req->tc->pubuf;
+			else
+				pbuf = req->tc->pkbuf;
+
 			in = pack_sg_list(chan->sg, out+inp, VIRTQUEUE_NUM,
 					pbuf, req->tc->pbuf_size);
 		}
diff --git a/net/9p/util.c b/net/9p/util.c
index b84619b5ba2..da6af81e59d 100644
--- a/net/9p/util.c
+++ b/net/9p/util.c
@@ -67,7 +67,7 @@ EXPORT_SYMBOL(p9_idpool_create);
 
 /**
  * p9_idpool_destroy - create a new per-connection id pool
- * @p: idpool to destory
+ * @p: idpool to destroy
  */
 
 void p9_idpool_destroy(struct p9_idpool *p)
diff --git a/net/Kconfig b/net/Kconfig
index 79cabf1ee68..878151c772c 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -232,6 +232,20 @@ config XPS
 	depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS
 	default y
 
+config HAVE_BPF_JIT
+	bool
+
+config BPF_JIT
+	bool "enable BPF Just In Time compiler"
+	depends on HAVE_BPF_JIT
+	depends on MODULES
+	---help---
+	  Berkeley Packet Filter filtering capabilities are normally handled
+	  by an interpreter. This option allows kernel to generate a native
+	  code when filter is loaded in memory. This should speedup
+	  packet sniffing (libpcap/tcpdump). Note : Admin should enable
+	  this feature changing /proc/sys/net/core/bpf_jit_enable
+
 menu "Network testing"
 
 config NET_PKTGEN
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index fce2eae8d47..2252c2085da 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -509,7 +509,7 @@ static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
 	write_lock_irq(&devs_lock);
 	net_dev = br2684_find_dev(&be.ifspec);
 	if (net_dev == NULL) {
-		pr_err("tried to attach to non-existant device\n");
+		pr_err("tried to attach to non-existent device\n");
 		err = -ENXIO;
 		goto error;
 	}
diff --git a/net/atm/lec.c b/net/atm/lec.c
index 38754fdb88b..25073b6ef47 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -129,7 +129,6 @@ static struct net_device *dev_lec[MAX_LEC_ITF];
 #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
 static void lec_handle_bridge(struct sk_buff *skb, struct net_device *dev)
 {
-	struct ethhdr *eth;
 	char *buff;
 	struct lec_priv *priv;
 
@@ -138,7 +137,6 @@ static void lec_handle_bridge(struct sk_buff *skb, struct net_device *dev)
 	 * LE_TOPOLOGY_REQUEST with the same value of Topology Change bit
 	 * as the Config BPDU has
 	 */
-	eth = (struct ethhdr *)skb->data;
 	buff = skb->data + skb->dev->hard_header_len;
 	if (*buff++ == 0x42 && *buff++ == 0x42 && *buff++ == 0x03) {
 		struct sock *sk;
@@ -1180,7 +1178,6 @@ static int __init lane_module_init(void)
 static void __exit lane_module_cleanup(void)
 {
 	int i;
-	struct lec_priv *priv;
 
 	remove_proc_entry("lec", atm_proc_root);
 
@@ -1188,7 +1185,6 @@ static void __exit lane_module_cleanup(void)
 
 	for (i = 0; i < MAX_LEC_ITF; i++) {
 		if (dev_lec[i] != NULL) {
-			priv = netdev_priv(dev_lec[i]);
 			unregister_netdev(dev_lec[i]);
 			free_netdev(dev_lec[i]);
 			dev_lec[i] = NULL;
diff --git a/net/atm/lec.h b/net/atm/lec.h
index 9d14d196cc1..dfc07196646 100644
--- a/net/atm/lec.h
+++ b/net/atm/lec.h
@@ -35,7 +35,7 @@ struct lecdatahdr_8025 {
  * Operations that LANE2 capable device can do. Two first functions
  * are used to make the device do things. See spec 3.1.3 and 3.1.4.
  *
- * The third function is intented for the MPOA component sitting on
+ * The third function is intended for the MPOA component sitting on
  * top of the LANE device. The MPOA component assigns it's own function
  * to (*associate_indicator)() and the LANE device will use that
  * function to tell about TLVs it sees floating through.
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 6da5daeebab..e7c69f4619e 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1538,8 +1538,6 @@ static int ax25_sendmsg(struct kiocb *iocb, struct socket *sock,
 	}
 
 	/* Build a packet */
-	SOCK_DEBUG(sk, "AX.25: sendto: Addresses built. Building packet.\n");
-
 	/* Assume the worst case */
 	size = len + ax25->ax25_dev->dev->hard_header_len;
 
@@ -1549,8 +1547,6 @@ static int ax25_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	skb_reserve(skb, size - len);
 
-	SOCK_DEBUG(sk, "AX.25: Appending user data\n");
-
 	/* User data follows immediately after the AX.25 data */
 	if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
 		err = -EFAULT;
@@ -1564,8 +1560,6 @@ static int ax25_sendmsg(struct kiocb *iocb, struct socket *sock,
 	if (!ax25->pidincl)
 		*skb_push(skb, 1) = sk->sk_protocol;
 
-	SOCK_DEBUG(sk, "AX.25: Transmitting buffer\n");
-
 	if (sk->sk_type == SOCK_SEQPACKET) {
 		/* Connected mode sockets go via the LAPB machine */
 		if (sk->sk_state != TCP_ESTABLISHED) {
@@ -1583,22 +1577,14 @@ static int ax25_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	skb_push(skb, 1 + ax25_addr_size(dp));
 
-	SOCK_DEBUG(sk, "Building AX.25 Header (dp=%p).\n", dp);
-
-	if (dp != NULL)
-		SOCK_DEBUG(sk, "Num digipeaters=%d\n", dp->ndigi);
+	/* Building AX.25 Header */
 
 	/* Build an AX.25 header */
 	lv = ax25_addr_build(skb->data, &ax25->source_addr, &sax.sax25_call,
 			     dp, AX25_COMMAND, AX25_MODULUS);
 
-	SOCK_DEBUG(sk, "Built header (%d bytes)\n",lv);
-
 	skb_set_transport_header(skb, lv);
 
-	SOCK_DEBUG(sk, "base=%p pos=%p\n",
-		   skb->data, skb_transport_header(skb));
-
 	*skb_transport_header(skb) = AX25_UI;
 
 	/* Datagram frames go straight out of the door as UI */
diff --git a/net/ax25/ax25_iface.c b/net/ax25/ax25_iface.c
index 5a0dda8df49..60b545e2822 100644
--- a/net/ax25/ax25_iface.c
+++ b/net/ax25/ax25_iface.c
@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ax25_register_pid);
 
 void ax25_protocol_release(unsigned int pid)
 {
-	struct ax25_protocol *s, *protocol;
+	struct ax25_protocol *protocol;
 
 	write_lock_bh(&protocol_list_lock);
 	protocol = protocol_list;
@@ -72,7 +72,6 @@ void ax25_protocol_release(unsigned int pid)
 
 	while (protocol != NULL && protocol->next != NULL) {
 		if (protocol->next->pid == pid) {
-			s = protocol->next;
 			protocol->next = protocol->next->next;
 			goto out;
 		}
diff --git a/net/batman-adv/aggregation.c b/net/batman-adv/aggregation.c
index af45d6b2031..a8c32030527 100644
--- a/net/batman-adv/aggregation.c
+++ b/net/batman-adv/aggregation.c
@@ -23,11 +23,12 @@
 #include "aggregation.h"
 #include "send.h"
 #include "routing.h"
+#include "hard-interface.h"
 
-/* calculate the size of the hna information for a given packet */
-static int hna_len(struct batman_packet *batman_packet)
+/* calculate the size of the tt information for a given packet */
+static int tt_len(struct batman_packet *batman_packet)
 {
-	return batman_packet->num_hna * ETH_ALEN;
+	return batman_packet->num_tt * ETH_ALEN;
 }
 
 /* return true if new_packet can be aggregated with forw_packet */
@@ -95,7 +96,6 @@ static bool can_aggregate_with(struct batman_packet *new_batman_packet,
 	return false;
 }
 
-#define atomic_dec_not_zero(v)          atomic_add_unless((v), -1, 0)
 /* create a new aggregated packet and add this packet to it */
 static void new_aggregated_packet(unsigned char *packet_buff, int packet_len,
 				  unsigned long send_time, bool direct_link,
@@ -106,12 +106,15 @@ static void new_aggregated_packet(unsigned char *packet_buff, int packet_len,
 	struct forw_packet *forw_packet_aggr;
 	unsigned char *skb_buff;
 
+	if (!atomic_inc_not_zero(&if_incoming->refcount))
+		return;
+
 	/* own packet should always be scheduled */
 	if (!own_packet) {
 		if (!atomic_dec_not_zero(&bat_priv->batman_queue_left)) {
 			bat_dbg(DBG_BATMAN, bat_priv,
 				"batman packet queue full\n");
-			return;
+			goto out;
 		}
 	}
 
@@ -119,7 +122,7 @@ static void new_aggregated_packet(unsigned char *packet_buff, int packet_len,
 	if (!forw_packet_aggr) {
 		if (!own_packet)
 			atomic_inc(&bat_priv->batman_queue_left);
-		return;
+		goto out;
 	}
 
 	if ((atomic_read(&bat_priv->aggregated_ogms)) &&
@@ -134,7 +137,7 @@ static void new_aggregated_packet(unsigned char *packet_buff, int packet_len,
 		if (!own_packet)
 			atomic_inc(&bat_priv->batman_queue_left);
 		kfree(forw_packet_aggr);
-		return;
+		goto out;
 	}
 	skb_reserve(forw_packet_aggr->skb, sizeof(struct ethhdr));
 
@@ -165,6 +168,10 @@ static void new_aggregated_packet(unsigned char *packet_buff, int packet_len,
 	queue_delayed_work(bat_event_workqueue,
 			   &forw_packet_aggr->delayed_work,
 			   send_time - jiffies);
+
+	return;
+out:
+	hardif_free_ref(if_incoming);
 }
 
 /* aggregate a new packet into the existing aggregation */
@@ -251,7 +258,7 @@ void receive_aggr_bat_packet(struct ethhdr *ethhdr, unsigned char *packet_buff,
 {
 	struct batman_packet *batman_packet;
 	int buff_pos = 0;
-	unsigned char *hna_buff;
+	unsigned char *tt_buff;
 
 	batman_packet = (struct batman_packet *)packet_buff;
 
@@ -260,14 +267,14 @@ void receive_aggr_bat_packet(struct ethhdr *ethhdr, unsigned char *packet_buff,
 		   orig_interval. */
 		batman_packet->seqno = ntohl(batman_packet->seqno);
 
-		hna_buff = packet_buff + buff_pos + BAT_PACKET_LEN;
+		tt_buff = packet_buff + buff_pos + BAT_PACKET_LEN;
 		receive_bat_packet(ethhdr, batman_packet,
-				   hna_buff, hna_len(batman_packet),
+				   tt_buff, tt_len(batman_packet),
 				   if_incoming);
 
-		buff_pos += BAT_PACKET_LEN + hna_len(batman_packet);
+		buff_pos += BAT_PACKET_LEN + tt_len(batman_packet);
 		batman_packet = (struct batman_packet *)
 			(packet_buff + buff_pos);
 	} while (aggregated_packet(buff_pos, packet_len,
-				   batman_packet->num_hna));
+				   batman_packet->num_tt));
 }
diff --git a/net/batman-adv/aggregation.h b/net/batman-adv/aggregation.h
index 062204289d1..7e6d72fbf54 100644
--- a/net/batman-adv/aggregation.h
+++ b/net/batman-adv/aggregation.h
@@ -25,9 +25,9 @@
 #include "main.h"
 
 /* is there another aggregated packet here? */
-static inline int aggregated_packet(int buff_pos, int packet_len, int num_hna)
+static inline int aggregated_packet(int buff_pos, int packet_len, int num_tt)
 {
-	int next_buff_pos = buff_pos + BAT_PACKET_LEN + (num_hna * ETH_ALEN);
+	int next_buff_pos = buff_pos + BAT_PACKET_LEN + (num_tt * ETH_ALEN);
 
 	return (next_buff_pos <= packet_len) &&
 		(next_buff_pos <= MAX_AGGREGATION_BYTES);
diff --git a/net/batman-adv/bat_debugfs.c b/net/batman-adv/bat_debugfs.c
index 0e9d4350993..abaeec5f624 100644
--- a/net/batman-adv/bat_debugfs.c
+++ b/net/batman-adv/bat_debugfs.c
@@ -241,13 +241,13 @@ static int softif_neigh_open(struct inode *inode, struct file *file)
 static int transtable_global_open(struct inode *inode, struct file *file)
 {
 	struct net_device *net_dev = (struct net_device *)inode->i_private;
-	return single_open(file, hna_global_seq_print_text, net_dev);
+	return single_open(file, tt_global_seq_print_text, net_dev);
 }
 
 static int transtable_local_open(struct inode *inode, struct file *file)
 {
 	struct net_device *net_dev = (struct net_device *)inode->i_private;
-	return single_open(file, hna_local_seq_print_text, net_dev);
+	return single_open(file, tt_local_seq_print_text, net_dev);
 }
 
 static int vis_data_open(struct inode *inode, struct file *file)
diff --git a/net/batman-adv/bat_sysfs.c b/net/batman-adv/bat_sysfs.c
index e449bf6353e..497a0700cc3 100644
--- a/net/batman-adv/bat_sysfs.c
+++ b/net/batman-adv/bat_sysfs.c
@@ -488,22 +488,24 @@ static ssize_t store_mesh_iface(struct kobject *kobj, struct attribute *attr,
 	    (strncmp(hard_iface->soft_iface->name, buff, IFNAMSIZ) == 0))
 		goto out;
 
+	if (!rtnl_trylock()) {
+		ret = -ERESTARTSYS;
+		goto out;
+	}
+
 	if (status_tmp == IF_NOT_IN_USE) {
-		rtnl_lock();
 		hardif_disable_interface(hard_iface);
-		rtnl_unlock();
-		goto out;
+		goto unlock;
 	}
 
 	/* if the interface already is in use */
-	if (hard_iface->if_status != IF_NOT_IN_USE) {
-		rtnl_lock();
+	if (hard_iface->if_status != IF_NOT_IN_USE)
 		hardif_disable_interface(hard_iface);
-		rtnl_unlock();
-	}
 
 	ret = hardif_enable_interface(hard_iface, buff);
 
+unlock:
+	rtnl_unlock();
 out:
 	hardif_free_ref(hard_iface);
 	return ret;
diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c
index 3cc43558cf9..61605a0f3f3 100644
--- a/net/batman-adv/gateway_client.c
+++ b/net/batman-adv/gateway_client.c
@@ -23,80 +23,88 @@
 #include "gateway_client.h"
 #include "gateway_common.h"
 #include "hard-interface.h"
+#include "originator.h"
 #include <linux/ip.h>
 #include <linux/ipv6.h>
 #include <linux/udp.h>
 #include <linux/if_vlan.h>
 
-static void gw_node_free_rcu(struct rcu_head *rcu)
-{
-	struct gw_node *gw_node;
-
-	gw_node = container_of(rcu, struct gw_node, rcu);
-	kfree(gw_node);
-}
-
 static void gw_node_free_ref(struct gw_node *gw_node)
 {
 	if (atomic_dec_and_test(&gw_node->refcount))
-		call_rcu(&gw_node->rcu, gw_node_free_rcu);
+		kfree_rcu(gw_node, rcu);
 }
 
-void *gw_get_selected(struct bat_priv *bat_priv)
+static struct gw_node *gw_get_selected_gw_node(struct bat_priv *bat_priv)
 {
-	struct gw_node *curr_gateway_tmp;
-	struct orig_node *orig_node = NULL;
+	struct gw_node *gw_node;
 
 	rcu_read_lock();
-	curr_gateway_tmp = rcu_dereference(bat_priv->curr_gw);
-	if (!curr_gateway_tmp)
+	gw_node = rcu_dereference(bat_priv->curr_gw);
+	if (!gw_node)
 		goto out;
 
-	orig_node = curr_gateway_tmp->orig_node;
-	if (!orig_node)
-		goto out;
-
-	if (!atomic_inc_not_zero(&orig_node->refcount))
-		orig_node = NULL;
+	if (!atomic_inc_not_zero(&gw_node->refcount))
+		gw_node = NULL;
 
 out:
 	rcu_read_unlock();
-	return orig_node;
+	return gw_node;
 }
 
-void gw_deselect(struct bat_priv *bat_priv)
+struct orig_node *gw_get_selected_orig(struct bat_priv *bat_priv)
 {
 	struct gw_node *gw_node;
+	struct orig_node *orig_node = NULL;
 
-	spin_lock_bh(&bat_priv->gw_list_lock);
-	gw_node = rcu_dereference(bat_priv->curr_gw);
-	rcu_assign_pointer(bat_priv->curr_gw, NULL);
-	spin_unlock_bh(&bat_priv->gw_list_lock);
+	gw_node = gw_get_selected_gw_node(bat_priv);
+	if (!gw_node)
+		goto out;
+
+	rcu_read_lock();
+	orig_node = gw_node->orig_node;
+	if (!orig_node)
+		goto unlock;
 
+	if (!atomic_inc_not_zero(&orig_node->refcount))
+		orig_node = NULL;
+
+unlock:
+	rcu_read_unlock();
+out:
 	if (gw_node)
 		gw_node_free_ref(gw_node);
+	return orig_node;
 }
 
 static void gw_select(struct bat_priv *bat_priv, struct gw_node *new_gw_node)
 {
 	struct gw_node *curr_gw_node;
 
+	spin_lock_bh(&bat_priv->gw_list_lock);
+
 	if (new_gw_node && !atomic_inc_not_zero(&new_gw_node->refcount))
 		new_gw_node = NULL;
 
-	spin_lock_bh(&bat_priv->gw_list_lock);
-	curr_gw_node = rcu_dereference(bat_priv->curr_gw);
+	curr_gw_node = bat_priv->curr_gw;
 	rcu_assign_pointer(bat_priv->curr_gw, new_gw_node);
-	spin_unlock_bh(&bat_priv->gw_list_lock);
 
 	if (curr_gw_node)
 		gw_node_free_ref(curr_gw_node);
+
+	spin_unlock_bh(&bat_priv->gw_list_lock);
+}
+
+void gw_deselect(struct bat_priv *bat_priv)
+{
+	gw_select(bat_priv, NULL);
 }
 
 void gw_election(struct bat_priv *bat_priv)
 {
 	struct hlist_node *node;
-	struct gw_node *gw_node, *curr_gw, *curr_gw_tmp = NULL;
+	struct gw_node *gw_node, *curr_gw = NULL, *curr_gw_tmp = NULL;
+	struct neigh_node *router;
 	uint8_t max_tq = 0;
 	uint32_t max_gw_factor = 0, tmp_gw_factor = 0;
 	int down, up;
@@ -110,32 +118,25 @@ void gw_election(struct bat_priv *bat_priv)
 	if (atomic_read(&bat_priv->gw_mode) != GW_MODE_CLIENT)
 		return;
 
-	rcu_read_lock();
-	curr_gw = rcu_dereference(bat_priv->curr_gw);
-	if (curr_gw) {
-		rcu_read_unlock();
-		return;
-	}
+	curr_gw = gw_get_selected_gw_node(bat_priv);
+	if (curr_gw)
+		goto out;
 
+	rcu_read_lock();
 	if (hlist_empty(&bat_priv->gw_list)) {
-
-		if (curr_gw) {
-			rcu_read_unlock();
-			bat_dbg(DBG_BATMAN, bat_priv,
-				"Removing selected gateway - "
-				"no gateway in range\n");
-			gw_deselect(bat_priv);
-		} else
-			rcu_read_unlock();
-
-		return;
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Removing selected gateway - "
+			"no gateway in range\n");
+		gw_deselect(bat_priv);
+		goto unlock;
 	}
 
 	hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
-		if (!gw_node->orig_node->router)
+		if (gw_node->deleted)
 			continue;
 
-		if (gw_node->deleted)
+		router = orig_node_get_router(gw_node->orig_node);
+		if (!router)
 			continue;
 
 		switch (atomic_read(&bat_priv->gw_sel_class)) {
@@ -143,15 +144,14 @@ void gw_election(struct bat_priv *bat_priv)
 			gw_bandwidth_to_kbit(gw_node->orig_node->gw_flags,
 					     &down, &up);
 
-			tmp_gw_factor = (gw_node->orig_node->router->tq_avg *
-					 gw_node->orig_node->router->tq_avg *
+			tmp_gw_factor = (router->tq_avg * router->tq_avg *
 					 down * 100 * 100) /
 					 (TQ_LOCAL_WINDOW_SIZE *
 					 TQ_LOCAL_WINDOW_SIZE * 64);
 
 			if ((tmp_gw_factor > max_gw_factor) ||
 			    ((tmp_gw_factor == max_gw_factor) &&
-			     (gw_node->orig_node->router->tq_avg > max_tq)))
+			     (router->tq_avg > max_tq)))
 				curr_gw_tmp = gw_node;
 			break;
 
@@ -163,19 +163,25 @@ void gw_election(struct bat_priv *bat_priv)
 			  *     soon as a better gateway appears which has
 			  *     $routing_class more tq points)
 			  **/
-			if (gw_node->orig_node->router->tq_avg > max_tq)
+			if (router->tq_avg > max_tq)
 				curr_gw_tmp = gw_node;
 			break;
 		}
 
-		if (gw_node->orig_node->router->tq_avg > max_tq)
-			max_tq = gw_node->orig_node->router->tq_avg;
+		if (router->tq_avg > max_tq)
+			max_tq = router->tq_avg;
 
 		if (tmp_gw_factor > max_gw_factor)
 			max_gw_factor = tmp_gw_factor;
+
+		neigh_node_free_ref(router);
 	}
 
 	if (curr_gw != curr_gw_tmp) {
+		router = orig_node_get_router(curr_gw_tmp->orig_node);
+		if (!router)
+			goto unlock;
+
 		if ((curr_gw) && (!curr_gw_tmp))
 			bat_dbg(DBG_BATMAN, bat_priv,
 				"Removing selected gateway - "
@@ -186,48 +192,50 @@ void gw_election(struct bat_priv *bat_priv)
 				"(gw_flags: %i, tq: %i)\n",
 				curr_gw_tmp->orig_node->orig,
 				curr_gw_tmp->orig_node->gw_flags,
-				curr_gw_tmp->orig_node->router->tq_avg);
+				router->tq_avg);
 		else
 			bat_dbg(DBG_BATMAN, bat_priv,
 				"Changing route to gateway %pM "
 				"(gw_flags: %i, tq: %i)\n",
 				curr_gw_tmp->orig_node->orig,
 				curr_gw_tmp->orig_node->gw_flags,
-				curr_gw_tmp->orig_node->router->tq_avg);
+				router->tq_avg);
 
+		neigh_node_free_ref(router);
 		gw_select(bat_priv, curr_gw_tmp);
 	}
 
+unlock:
 	rcu_read_unlock();
+out:
+	if (curr_gw)
+		gw_node_free_ref(curr_gw);
 }
 
 void gw_check_election(struct bat_priv *bat_priv, struct orig_node *orig_node)
 {
-	struct gw_node *curr_gateway_tmp;
+	struct orig_node *curr_gw_orig;
+	struct neigh_node *router_gw = NULL, *router_orig = NULL;
 	uint8_t gw_tq_avg, orig_tq_avg;
 
-	rcu_read_lock();
-	curr_gateway_tmp = rcu_dereference(bat_priv->curr_gw);
-	if (!curr_gateway_tmp)
-		goto out_rcu;
-
-	if (!curr_gateway_tmp->orig_node)
-		goto deselect_rcu;
+	curr_gw_orig = gw_get_selected_orig(bat_priv);
+	if (!curr_gw_orig)
+		goto deselect;
 
-	if (!curr_gateway_tmp->orig_node->router)
-		goto deselect_rcu;
+	router_gw = orig_node_get_router(curr_gw_orig);
+	if (!router_gw)
+		goto deselect;
 
 	/* this node already is the gateway */
-	if (curr_gateway_tmp->orig_node == orig_node)
-		goto out_rcu;
-
-	if (!orig_node->router)
-		goto out_rcu;
+	if (curr_gw_orig == orig_node)
+		goto out;
 
-	gw_tq_avg = curr_gateway_tmp->orig_node->router->tq_avg;
-	rcu_read_unlock();
+	router_orig = orig_node_get_router(orig_node);
+	if (!router_orig)
+		goto out;
 
-	orig_tq_avg = orig_node->router->tq_avg;
+	gw_tq_avg = router_gw->tq_avg;
+	orig_tq_avg = router_orig->tq_avg;
 
 	/* the TQ value has to be better */
 	if (orig_tq_avg < gw_tq_avg)
@@ -245,16 +253,17 @@ void gw_check_election(struct bat_priv *bat_priv, struct orig_node *orig_node)
 		"Restarting gateway selection: better gateway found (tq curr: "
 		"%i, tq new: %i)\n",
 		gw_tq_avg, orig_tq_avg);
-	goto deselect;
 
-out_rcu:
-	rcu_read_unlock();
-	goto out;
-deselect_rcu:
-	rcu_read_unlock();
 deselect:
 	gw_deselect(bat_priv);
 out:
+	if (curr_gw_orig)
+		orig_node_free_ref(curr_gw_orig);
+	if (router_gw)
+		neigh_node_free_ref(router_gw);
+	if (router_orig)
+		neigh_node_free_ref(router_orig);
+
 	return;
 }
 
@@ -291,7 +300,15 @@ void gw_node_update(struct bat_priv *bat_priv,
 		    struct orig_node *orig_node, uint8_t new_gwflags)
 {
 	struct hlist_node *node;
-	struct gw_node *gw_node;
+	struct gw_node *gw_node, *curr_gw;
+
+	/**
+	 * Note: We don't need a NULL check here, since curr_gw never gets
+	 * dereferenced. If curr_gw is NULL we also should not exit as we may
+	 * have this gateway in our list (duplication check!) even though we
+	 * have no currently selected gateway.
+	 */
+	curr_gw = gw_get_selected_gw_node(bat_priv);
 
 	rcu_read_lock();
 	hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
@@ -312,22 +329,26 @@ void gw_node_update(struct bat_priv *bat_priv,
 				"Gateway %pM removed from gateway list\n",
 				orig_node->orig);
 
-			if (gw_node == rcu_dereference(bat_priv->curr_gw)) {
-				rcu_read_unlock();
-				gw_deselect(bat_priv);
-				return;
-			}
+			if (gw_node == curr_gw)
+				goto deselect;
 		}
 
-		rcu_read_unlock();
-		return;
+		goto unlock;
 	}
-	rcu_read_unlock();
 
 	if (new_gwflags == 0)
-		return;
+		goto unlock;
 
 	gw_node_add(bat_priv, orig_node, new_gwflags);
+	goto unlock;
+
+deselect:
+	gw_deselect(bat_priv);
+unlock:
+	rcu_read_unlock();
+
+	if (curr_gw)
+		gw_node_free_ref(curr_gw);
 }
 
 void gw_node_delete(struct bat_priv *bat_priv, struct orig_node *orig_node)
@@ -337,9 +358,12 @@ void gw_node_delete(struct bat_priv *bat_priv, struct orig_node *orig_node)
 
 void gw_node_purge(struct bat_priv *bat_priv)
 {
-	struct gw_node *gw_node;
+	struct gw_node *gw_node, *curr_gw;
 	struct hlist_node *node, *node_tmp;
 	unsigned long timeout = 2 * PURGE_TIMEOUT * HZ;
+	char do_deselect = 0;
+
+	curr_gw = gw_get_selected_gw_node(bat_priv);
 
 	spin_lock_bh(&bat_priv->gw_list_lock);
 
@@ -350,41 +374,56 @@ void gw_node_purge(struct bat_priv *bat_priv)
 		    atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE)
 			continue;
 
-		if (rcu_dereference(bat_priv->curr_gw) == gw_node)
-			gw_deselect(bat_priv);
+		if (curr_gw == gw_node)
+			do_deselect = 1;
 
 		hlist_del_rcu(&gw_node->list);
 		gw_node_free_ref(gw_node);
 	}
 
-
 	spin_unlock_bh(&bat_priv->gw_list_lock);
+
+	/* gw_deselect() needs to acquire the gw_list_lock */
+	if (do_deselect)
+		gw_deselect(bat_priv);
+
+	if (curr_gw)
+		gw_node_free_ref(curr_gw);
 }
 
+/**
+ * fails if orig_node has no router
+ */
 static int _write_buffer_text(struct bat_priv *bat_priv,
 			      struct seq_file *seq, struct gw_node *gw_node)
 {
 	struct gw_node *curr_gw;
-	int down, up, ret;
+	struct neigh_node *router;
+	int down, up, ret = -1;
 
 	gw_bandwidth_to_kbit(gw_node->orig_node->gw_flags, &down, &up);
 
-	rcu_read_lock();
-	curr_gw = rcu_dereference(bat_priv->curr_gw);
+	router = orig_node_get_router(gw_node->orig_node);
+	if (!router)
+		goto out;
 
-	ret = seq_printf(seq, "%s %pM (%3i) %pM [%10s]: %3i - %i%s/%i%s\n",
-		       (curr_gw == gw_node ? "=>" : "  "),
-		       gw_node->orig_node->orig,
-		       gw_node->orig_node->router->tq_avg,
-		       gw_node->orig_node->router->addr,
-		       gw_node->orig_node->router->if_incoming->net_dev->name,
-		       gw_node->orig_node->gw_flags,
-		       (down > 2048 ? down / 1024 : down),
-		       (down > 2048 ? "MBit" : "KBit"),
-		       (up > 2048 ? up / 1024 : up),
-		       (up > 2048 ? "MBit" : "KBit"));
+	curr_gw = gw_get_selected_gw_node(bat_priv);
 
-	rcu_read_unlock();
+	ret = seq_printf(seq, "%s %pM (%3i) %pM [%10s]: %3i - %i%s/%i%s\n",
+			 (curr_gw == gw_node ? "=>" : "  "),
+			 gw_node->orig_node->orig,
+			 router->tq_avg, router->addr,
+			 router->if_incoming->net_dev->name,
+			 gw_node->orig_node->gw_flags,
+			 (down > 2048 ? down / 1024 : down),
+			 (down > 2048 ? "MBit" : "KBit"),
+			 (up > 2048 ? up / 1024 : up),
+			 (up > 2048 ? "MBit" : "KBit"));
+
+	neigh_node_free_ref(router);
+	if (curr_gw)
+		gw_node_free_ref(curr_gw);
+out:
 	return ret;
 }
 
@@ -392,40 +431,42 @@ int gw_client_seq_print_text(struct seq_file *seq, void *offset)
 {
 	struct net_device *net_dev = (struct net_device *)seq->private;
 	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	struct hard_iface *primary_if;
 	struct gw_node *gw_node;
 	struct hlist_node *node;
-	int gw_count = 0;
-
-	if (!bat_priv->primary_if) {
+	int gw_count = 0, ret = 0;
 
-		return seq_printf(seq, "BATMAN mesh %s disabled - please "
-				  "specify interfaces to enable it\n",
-				  net_dev->name);
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if) {
+		ret = seq_printf(seq, "BATMAN mesh %s disabled - please "
+				 "specify interfaces to enable it\n",
+				 net_dev->name);
+		goto out;
 	}
 
-	if (bat_priv->primary_if->if_status != IF_ACTIVE) {
-
-		return seq_printf(seq, "BATMAN mesh %s disabled - "
-				       "primary interface not active\n",
-				       net_dev->name);
+	if (primary_if->if_status != IF_ACTIVE) {
+		ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+				 "primary interface not active\n",
+				 net_dev->name);
+		goto out;
 	}
 
 	seq_printf(seq, "      %-12s (%s/%i) %17s [%10s]: gw_class ... "
 		   "[B.A.T.M.A.N. adv %s%s, MainIF/MAC: %s/%pM (%s)]\n",
 		   "Gateway", "#", TQ_MAX_VALUE, "Nexthop",
 		   "outgoingIF", SOURCE_VERSION, REVISION_VERSION_STR,
-		   bat_priv->primary_if->net_dev->name,
-		   bat_priv->primary_if->net_dev->dev_addr, net_dev->name);
+		   primary_if->net_dev->name,
+		   primary_if->net_dev->dev_addr, net_dev->name);
 
 	rcu_read_lock();
 	hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
 		if (gw_node->deleted)
 			continue;
 
-		if (!gw_node->orig_node->router)
+		/* fails if orig_node has no router */
+		if (_write_buffer_text(bat_priv, seq, gw_node) < 0)
 			continue;
 
-		_write_buffer_text(bat_priv, seq, gw_node);
 		gw_count++;
 	}
 	rcu_read_unlock();
@@ -433,7 +474,10 @@ int gw_client_seq_print_text(struct seq_file *seq, void *offset)
 	if (gw_count == 0)
 		seq_printf(seq, "No gateways in range ...\n");
 
-	return 0;
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	return ret;
 }
 
 int gw_is_target(struct bat_priv *bat_priv, struct sk_buff *skb)
@@ -442,6 +486,7 @@ int gw_is_target(struct bat_priv *bat_priv, struct sk_buff *skb)
 	struct iphdr *iphdr;
 	struct ipv6hdr *ipv6hdr;
 	struct udphdr *udphdr;
+	struct gw_node *curr_gw;
 	unsigned int header_len = 0;
 
 	if (atomic_read(&bat_priv->gw_mode) == GW_MODE_OFF)
@@ -506,12 +551,11 @@ int gw_is_target(struct bat_priv *bat_priv, struct sk_buff *skb)
 	if (atomic_read(&bat_priv->gw_mode) == GW_MODE_SERVER)
 		return -1;
 
-	rcu_read_lock();
-	if (!rcu_dereference(bat_priv->curr_gw)) {
-		rcu_read_unlock();
+	curr_gw = gw_get_selected_gw_node(bat_priv);
+	if (!curr_gw)
 		return 0;
-	}
-	rcu_read_unlock();
 
+	if (curr_gw)
+		gw_node_free_ref(curr_gw);
 	return 1;
 }
diff --git a/net/batman-adv/gateway_client.h b/net/batman-adv/gateway_client.h
index 2aa439124ee..1ce8c6066da 100644
--- a/net/batman-adv/gateway_client.h
+++ b/net/batman-adv/gateway_client.h
@@ -24,7 +24,7 @@
 
 void gw_deselect(struct bat_priv *bat_priv);
 void gw_election(struct bat_priv *bat_priv);
-void *gw_get_selected(struct bat_priv *bat_priv);
+struct orig_node *gw_get_selected_orig(struct bat_priv *bat_priv);
 void gw_check_election(struct bat_priv *bat_priv, struct orig_node *orig_node);
 void gw_node_update(struct bat_priv *bat_priv,
 		    struct orig_node *orig_node, uint8_t new_gwflags);
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index b3058e46ee6..dfbfccc9fe4 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -31,9 +31,6 @@
 
 #include <linux/if_arp.h>
 
-/* protect update critical side of hardif_list - but not the content */
-static DEFINE_SPINLOCK(hardif_list_lock);
-
 
 static int batman_skb_recv(struct sk_buff *skb,
 			   struct net_device *dev,
@@ -110,47 +107,57 @@ out:
 	return hard_iface;
 }
 
-static void update_primary_addr(struct bat_priv *bat_priv)
+static void primary_if_update_addr(struct bat_priv *bat_priv)
 {
 	struct vis_packet *vis_packet;
+	struct hard_iface *primary_if;
+
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
+		goto out;
 
 	vis_packet = (struct vis_packet *)
 				bat_priv->my_vis_info->skb_packet->data;
-	memcpy(vis_packet->vis_orig,
-	       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+	memcpy(vis_packet->vis_orig, primary_if->net_dev->dev_addr, ETH_ALEN);
 	memcpy(vis_packet->sender_orig,
-	       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+	       primary_if->net_dev->dev_addr, ETH_ALEN);
+
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
 }
 
-static void set_primary_if(struct bat_priv *bat_priv,
-			   struct hard_iface *hard_iface)
+static void primary_if_select(struct bat_priv *bat_priv,
+			      struct hard_iface *new_hard_iface)
 {
+	struct hard_iface *curr_hard_iface;
 	struct batman_packet *batman_packet;
-	struct hard_iface *old_if;
 
-	if (hard_iface && !atomic_inc_not_zero(&hard_iface->refcount))
-		hard_iface = NULL;
+	ASSERT_RTNL();
+
+	if (new_hard_iface && !atomic_inc_not_zero(&new_hard_iface->refcount))
+		new_hard_iface = NULL;
 
-	old_if = bat_priv->primary_if;
-	bat_priv->primary_if = hard_iface;
+	curr_hard_iface = bat_priv->primary_if;
+	rcu_assign_pointer(bat_priv->primary_if, new_hard_iface);
 
-	if (old_if)
-		hardif_free_ref(old_if);
+	if (curr_hard_iface)
+		hardif_free_ref(curr_hard_iface);
 
-	if (!bat_priv->primary_if)
+	if (!new_hard_iface)
 		return;
 
-	batman_packet = (struct batman_packet *)(hard_iface->packet_buff);
+	batman_packet = (struct batman_packet *)(new_hard_iface->packet_buff);
 	batman_packet->flags = PRIMARIES_FIRST_HOP;
 	batman_packet->ttl = TTL;
 
-	update_primary_addr(bat_priv);
+	primary_if_update_addr(bat_priv);
 
 	/***
-	 * hacky trick to make sure that we send the HNA information via
+	 * hacky trick to make sure that we send the TT information via
 	 * our new primary interface
 	 */
-	atomic_set(&bat_priv->hna_local_changed, 1);
+	atomic_set(&bat_priv->tt_local_changed, 1);
 }
 
 static bool hardif_is_iface_up(struct hard_iface *hard_iface)
@@ -236,9 +243,10 @@ void update_min_mtu(struct net_device *soft_iface)
 static void hardif_activate_interface(struct hard_iface *hard_iface)
 {
 	struct bat_priv *bat_priv;
+	struct hard_iface *primary_if = NULL;
 
 	if (hard_iface->if_status != IF_INACTIVE)
-		return;
+		goto out;
 
 	bat_priv = netdev_priv(hard_iface->soft_iface);
 
@@ -249,14 +257,18 @@ static void hardif_activate_interface(struct hard_iface *hard_iface)
 	 * the first active interface becomes our primary interface or
 	 * the next active interface after the old primay interface was removed
 	 */
-	if (!bat_priv->primary_if)
-		set_primary_if(bat_priv, hard_iface);
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
+		primary_if_select(bat_priv, hard_iface);
 
 	bat_info(hard_iface->soft_iface, "Interface activated: %s\n",
 		 hard_iface->net_dev->name);
 
 	update_min_mtu(hard_iface->soft_iface);
-	return;
+
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
 }
 
 static void hardif_deactivate_interface(struct hard_iface *hard_iface)
@@ -327,7 +339,7 @@ int hardif_enable_interface(struct hard_iface *hard_iface, char *iface_name)
 	batman_packet->flags = 0;
 	batman_packet->ttl = 2;
 	batman_packet->tq = TQ_MAX_VALUE;
-	batman_packet->num_hna = 0;
+	batman_packet->num_tt = 0;
 
 	hard_iface->if_num = bat_priv->num_ifaces;
 	bat_priv->num_ifaces++;
@@ -386,12 +398,13 @@ err:
 void hardif_disable_interface(struct hard_iface *hard_iface)
 {
 	struct bat_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
+	struct hard_iface *primary_if = NULL;
 
 	if (hard_iface->if_status == IF_ACTIVE)
 		hardif_deactivate_interface(hard_iface);
 
 	if (hard_iface->if_status != IF_INACTIVE)
-		return;
+		goto out;
 
 	bat_info(hard_iface->soft_iface, "Removing interface: %s\n",
 		 hard_iface->net_dev->name);
@@ -400,11 +413,12 @@ void hardif_disable_interface(struct hard_iface *hard_iface)
 	bat_priv->num_ifaces--;
 	orig_hash_del_if(hard_iface, bat_priv->num_ifaces);
 
-	if (hard_iface == bat_priv->primary_if) {
+	primary_if = primary_if_get_selected(bat_priv);
+	if (hard_iface == primary_if) {
 		struct hard_iface *new_if;
 
 		new_if = hardif_get_active(hard_iface->soft_iface);
-		set_primary_if(bat_priv, new_if);
+		primary_if_select(bat_priv, new_if);
 
 		if (new_if)
 			hardif_free_ref(new_if);
@@ -425,6 +439,10 @@ void hardif_disable_interface(struct hard_iface *hard_iface)
 
 	hard_iface->soft_iface = NULL;
 	hardif_free_ref(hard_iface);
+
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
 }
 
 static struct hard_iface *hardif_add_interface(struct net_device *net_dev)
@@ -432,6 +450,8 @@ static struct hard_iface *hardif_add_interface(struct net_device *net_dev)
 	struct hard_iface *hard_iface;
 	int ret;
 
+	ASSERT_RTNL();
+
 	ret = is_valid_iface(net_dev);
 	if (ret != 1)
 		goto out;
@@ -458,10 +478,7 @@ static struct hard_iface *hardif_add_interface(struct net_device *net_dev)
 	atomic_set(&hard_iface->refcount, 2);
 
 	check_known_mac_addr(hard_iface->net_dev);
-
-	spin_lock(&hardif_list_lock);
 	list_add_tail_rcu(&hard_iface->list, &hardif_list);
-	spin_unlock(&hardif_list_lock);
 
 	return hard_iface;
 
@@ -475,6 +492,8 @@ out:
 
 static void hardif_remove_interface(struct hard_iface *hard_iface)
 {
+	ASSERT_RTNL();
+
 	/* first deactivate interface */
 	if (hard_iface->if_status != IF_NOT_IN_USE)
 		hardif_disable_interface(hard_iface);
@@ -490,20 +509,11 @@ static void hardif_remove_interface(struct hard_iface *hard_iface)
 void hardif_remove_interfaces(void)
 {
 	struct hard_iface *hard_iface, *hard_iface_tmp;
-	struct list_head if_queue;
-
-	INIT_LIST_HEAD(&if_queue);
 
-	spin_lock(&hardif_list_lock);
+	rtnl_lock();
 	list_for_each_entry_safe(hard_iface, hard_iface_tmp,
 				 &hardif_list, list) {
 		list_del_rcu(&hard_iface->list);
-		list_add_tail(&hard_iface->list, &if_queue);
-	}
-	spin_unlock(&hardif_list_lock);
-
-	rtnl_lock();
-	list_for_each_entry_safe(hard_iface, hard_iface_tmp, &if_queue, list) {
 		hardif_remove_interface(hard_iface);
 	}
 	rtnl_unlock();
@@ -514,6 +524,7 @@ static int hard_if_event(struct notifier_block *this,
 {
 	struct net_device *net_dev = (struct net_device *)ptr;
 	struct hard_iface *hard_iface = hardif_get_by_netdev(net_dev);
+	struct hard_iface *primary_if = NULL;
 	struct bat_priv *bat_priv;
 
 	if (!hard_iface && event == NETDEV_REGISTER)
@@ -531,9 +542,7 @@ static int hard_if_event(struct notifier_block *this,
 		hardif_deactivate_interface(hard_iface);
 		break;
 	case NETDEV_UNREGISTER:
-		spin_lock(&hardif_list_lock);
 		list_del_rcu(&hard_iface->list);
-		spin_unlock(&hardif_list_lock);
 
 		hardif_remove_interface(hard_iface);
 		break;
@@ -549,8 +558,12 @@ static int hard_if_event(struct notifier_block *this,
 		update_mac_addresses(hard_iface);
 
 		bat_priv = netdev_priv(hard_iface->soft_iface);
-		if (hard_iface == bat_priv->primary_if)
-			update_primary_addr(bat_priv);
+		primary_if = primary_if_get_selected(bat_priv);
+		if (!primary_if)
+			goto hardif_put;
+
+		if (hard_iface == primary_if)
+			primary_if_update_addr(bat_priv);
 		break;
 	default:
 		break;
@@ -559,6 +572,8 @@ static int hard_if_event(struct notifier_block *this,
 hardif_put:
 	hardif_free_ref(hard_iface);
 out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
 	return NOTIFY_DONE;
 }
 
diff --git a/net/batman-adv/hard-interface.h b/net/batman-adv/hard-interface.h
index a9ddf36e51c..64265991460 100644
--- a/net/batman-adv/hard-interface.h
+++ b/net/batman-adv/hard-interface.h
@@ -45,4 +45,22 @@ static inline void hardif_free_ref(struct hard_iface *hard_iface)
 		call_rcu(&hard_iface->rcu, hardif_free_rcu);
 }
 
+static inline struct hard_iface *primary_if_get_selected(
+						struct bat_priv *bat_priv)
+{
+	struct hard_iface *hard_iface;
+
+	rcu_read_lock();
+	hard_iface = rcu_dereference(bat_priv->primary_if);
+	if (!hard_iface)
+		goto out;
+
+	if (!atomic_inc_not_zero(&hard_iface->refcount))
+		hard_iface = NULL;
+
+out:
+	rcu_read_unlock();
+	return hard_iface;
+}
+
 #endif /* _NET_BATMAN_ADV_HARD_INTERFACE_H_ */
diff --git a/net/batman-adv/icmp_socket.c b/net/batman-adv/icmp_socket.c
index 34ce56c358e..fa22ba2bb83 100644
--- a/net/batman-adv/icmp_socket.c
+++ b/net/batman-adv/icmp_socket.c
@@ -153,6 +153,7 @@ static ssize_t bat_socket_write(struct file *file, const char __user *buff,
 {
 	struct socket_client *socket_client = file->private_data;
 	struct bat_priv *bat_priv = socket_client->bat_priv;
+	struct hard_iface *primary_if = NULL;
 	struct sk_buff *skb;
 	struct icmp_packet_rr *icmp_packet;
 
@@ -167,15 +168,21 @@ static ssize_t bat_socket_write(struct file *file, const char __user *buff,
 		return -EINVAL;
 	}
 
-	if (!bat_priv->primary_if)
-		return -EFAULT;
+	primary_if = primary_if_get_selected(bat_priv);
+
+	if (!primary_if) {
+		len = -EFAULT;
+		goto out;
+	}
 
 	if (len >= sizeof(struct icmp_packet_rr))
 		packet_len = sizeof(struct icmp_packet_rr);
 
 	skb = dev_alloc_skb(packet_len + sizeof(struct ethhdr));
-	if (!skb)
-		return -ENOMEM;
+	if (!skb) {
+		len = -ENOMEM;
+		goto out;
+	}
 
 	skb_reserve(skb, sizeof(struct ethhdr));
 	icmp_packet = (struct icmp_packet_rr *)skb_put(skb, packet_len);
@@ -218,23 +225,13 @@ static ssize_t bat_socket_write(struct file *file, const char __user *buff,
 	if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
 		goto dst_unreach;
 
-	rcu_read_lock();
 	orig_node = orig_hash_find(bat_priv, icmp_packet->dst);
-
 	if (!orig_node)
-		goto unlock;
-
-	neigh_node = orig_node->router;
+		goto dst_unreach;
 
+	neigh_node = orig_node_get_router(orig_node);
 	if (!neigh_node)
-		goto unlock;
-
-	if (!atomic_inc_not_zero(&neigh_node->refcount)) {
-		neigh_node = NULL;
-		goto unlock;
-	}
-
-	rcu_read_unlock();
+		goto dst_unreach;
 
 	if (!neigh_node->if_incoming)
 		goto dst_unreach;
@@ -243,7 +240,7 @@ static ssize_t bat_socket_write(struct file *file, const char __user *buff,
 		goto dst_unreach;
 
 	memcpy(icmp_packet->orig,
-	       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+	       primary_if->net_dev->dev_addr, ETH_ALEN);
 
 	if (packet_len == sizeof(struct icmp_packet_rr))
 		memcpy(icmp_packet->rr,
@@ -252,14 +249,14 @@ static ssize_t bat_socket_write(struct file *file, const char __user *buff,
 	send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
 	goto out;
 
-unlock:
-	rcu_read_unlock();
 dst_unreach:
 	icmp_packet->msg_type = DESTINATION_UNREACHABLE;
 	bat_socket_add_packet(socket_client, icmp_packet, packet_len);
 free_skb:
 	kfree_skb(skb);
 out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
 	if (neigh_node)
 		neigh_node_free_ref(neigh_node);
 	if (orig_node)
diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index 709b33bbdf4..0a7cee0076f 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -33,6 +33,9 @@
 #include "vis.h"
 #include "hash.h"
 
+
+/* List manipulations on hardif_list have to be rtnl_lock()'ed,
+ * list traversals just rcu-locked */
 struct list_head hardif_list;
 
 unsigned char broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
@@ -81,28 +84,29 @@ int mesh_init(struct net_device *soft_iface)
 
 	spin_lock_init(&bat_priv->forw_bat_list_lock);
 	spin_lock_init(&bat_priv->forw_bcast_list_lock);
-	spin_lock_init(&bat_priv->hna_lhash_lock);
-	spin_lock_init(&bat_priv->hna_ghash_lock);
+	spin_lock_init(&bat_priv->tt_lhash_lock);
+	spin_lock_init(&bat_priv->tt_ghash_lock);
 	spin_lock_init(&bat_priv->gw_list_lock);
 	spin_lock_init(&bat_priv->vis_hash_lock);
 	spin_lock_init(&bat_priv->vis_list_lock);
 	spin_lock_init(&bat_priv->softif_neigh_lock);
+	spin_lock_init(&bat_priv->softif_neigh_vid_lock);
 
 	INIT_HLIST_HEAD(&bat_priv->forw_bat_list);
 	INIT_HLIST_HEAD(&bat_priv->forw_bcast_list);
 	INIT_HLIST_HEAD(&bat_priv->gw_list);
-	INIT_HLIST_HEAD(&bat_priv->softif_neigh_list);
+	INIT_HLIST_HEAD(&bat_priv->softif_neigh_vids);
 
 	if (originator_init(bat_priv) < 1)
 		goto err;
 
-	if (hna_local_init(bat_priv) < 1)
+	if (tt_local_init(bat_priv) < 1)
 		goto err;
 
-	if (hna_global_init(bat_priv) < 1)
+	if (tt_global_init(bat_priv) < 1)
 		goto err;
 
-	hna_local_add(soft_iface, soft_iface->dev_addr);
+	tt_local_add(soft_iface, soft_iface->dev_addr);
 
 	if (vis_init(bat_priv) < 1)
 		goto err;
@@ -133,8 +137,8 @@ void mesh_free(struct net_device *soft_iface)
 	gw_node_purge(bat_priv);
 	originator_free(bat_priv);
 
-	hna_local_free(bat_priv);
-	hna_global_free(bat_priv);
+	tt_local_free(bat_priv);
+	tt_global_free(bat_priv);
 
 	softif_neigh_purge(bat_priv);
 
diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
index dc248697de7..148b49e0264 100644
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -34,16 +34,18 @@
 
 #define TQ_MAX_VALUE 255
 #define JITTER 20
-#define TTL 50			  /* Time To Live of broadcast messages */
 
-#define PURGE_TIMEOUT 200	/* purge originators after time in seconds if no
-				   * valid packet comes in -> TODO: check
-				   * influence on TQ_LOCAL_WINDOW_SIZE */
-#define LOCAL_HNA_TIMEOUT 3600 /* in seconds */
+ /* Time To Live of broadcast messages */
+#define TTL 50
 
-#define TQ_LOCAL_WINDOW_SIZE 64	  /* sliding packet range of received originator
-				   * messages in squence numbers (should be a
-				   * multiple of our word size) */
+/* purge originators after time in seconds if no valid packet comes in
+ * -> TODO: check influence on TQ_LOCAL_WINDOW_SIZE */
+#define PURGE_TIMEOUT 200
+#define TT_LOCAL_TIMEOUT 3600 /* in seconds */
+
+/* sliding packet range of received originator messages in squence numbers
+ * (should be a multiple of our word size) */
+#define TQ_LOCAL_WINDOW_SIZE 64
 #define TQ_GLOBAL_WINDOW_SIZE 5
 #define TQ_LOCAL_BIDRECT_SEND_MINIMUM 1
 #define TQ_LOCAL_BIDRECT_RECV_MINIMUM 1
@@ -55,21 +57,20 @@
 
 #define VIS_INTERVAL 5000	/* 5 seconds */
 
-/* how much worse secondary interfaces may be to
- * to be considered as bonding candidates */
-
+/* how much worse secondary interfaces may be to be considered as bonding
+ * candidates */
 #define BONDING_TQ_THRESHOLD	50
 
-#define MAX_AGGREGATION_BYTES 512 /* should not be bigger than 512 bytes or
-				   * change the size of
-				   * forw_packet->direct_link_flags */
+/* should not be bigger than 512 bytes or change the size of
+ * forw_packet->direct_link_flags */
+#define MAX_AGGREGATION_BYTES 512
 #define MAX_AGGREGATION_MS 100
 
 #define SOFTIF_NEIGH_TIMEOUT 180000 /* 3 minutes */
 
+/* don't reset again within 30 seconds */
 #define RESET_PROTECTION_MS 30000
 #define EXPECTED_SEQNO_RANGE	65536
-/* don't reset again within 30 seconds */
 
 #define MESH_INACTIVE 0
 #define MESH_ACTIVE 1
@@ -84,12 +85,13 @@
 #ifdef pr_fmt
 #undef pr_fmt
 #endif
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt /* Append 'batman-adv: ' before
-					     * kernel messages */
+/* Append 'batman-adv: ' before kernel messages */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#define DBG_BATMAN 1	/* all messages related to routing / flooding /
-			 * broadcasting / etc */
-#define DBG_ROUTES 2	/* route or hna added / changed / deleted */
+/* all messages related to routing / flooding / broadcasting / etc */
+#define DBG_BATMAN 1
+/* route or tt entry added / changed / deleted */
+#define DBG_ROUTES 2
 #define DBG_ALL 3
 
 
@@ -175,4 +177,6 @@ static inline int compare_eth(void *data1, void *data2)
 	return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0);
 }
 
+#define atomic_dec_not_zero(v)	atomic_add_unless((v), -1, 0)
+
 #endif /* _NET_BATMAN_ADV_MAIN_H_ */
diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
index 0b9133022d2..40a30bbcd14 100644
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -19,8 +19,6 @@
  *
  */
 
-/* increase the reference counter for this originator */
-
 #include "main.h"
 #include "originator.h"
 #include "hash.h"
@@ -56,18 +54,25 @@ err:
 	return 0;
 }
 
-static void neigh_node_free_rcu(struct rcu_head *rcu)
+void neigh_node_free_ref(struct neigh_node *neigh_node)
 {
-	struct neigh_node *neigh_node;
-
-	neigh_node = container_of(rcu, struct neigh_node, rcu);
-	kfree(neigh_node);
+	if (atomic_dec_and_test(&neigh_node->refcount))
+		kfree_rcu(neigh_node, rcu);
 }
 
-void neigh_node_free_ref(struct neigh_node *neigh_node)
+/* increases the refcounter of a found router */
+struct neigh_node *orig_node_get_router(struct orig_node *orig_node)
 {
-	if (atomic_dec_and_test(&neigh_node->refcount))
-		call_rcu(&neigh_node->rcu, neigh_node_free_rcu);
+	struct neigh_node *router;
+
+	rcu_read_lock();
+	router = rcu_dereference(orig_node->router);
+
+	if (router && !atomic_inc_not_zero(&router->refcount))
+		router = NULL;
+
+	rcu_read_unlock();
+	return router;
 }
 
 struct neigh_node *create_neighbor(struct orig_node *orig_node,
@@ -87,6 +92,7 @@ struct neigh_node *create_neighbor(struct orig_node *orig_node,
 
 	INIT_HLIST_NODE(&neigh_node->list);
 	INIT_LIST_HEAD(&neigh_node->bonding_list);
+	spin_lock_init(&neigh_node->tq_lock);
 
 	memcpy(neigh_node->addr, neigh, ETH_ALEN);
 	neigh_node->orig_node = orig_neigh_node;
@@ -128,7 +134,7 @@ static void orig_node_free_rcu(struct rcu_head *rcu)
 	spin_unlock_bh(&orig_node->neigh_list_lock);
 
 	frag_list_free(&orig_node->frag_list);
-	hna_global_del_orig(orig_node->bat_priv, orig_node,
+	tt_global_del_orig(orig_node->bat_priv, orig_node,
 			    "originator timed out");
 
 	kfree(orig_node->bcast_own);
@@ -206,7 +212,7 @@ struct orig_node *get_orig_node(struct bat_priv *bat_priv, uint8_t *addr)
 	orig_node->bat_priv = bat_priv;
 	memcpy(orig_node->orig, addr, ETH_ALEN);
 	orig_node->router = NULL;
-	orig_node->hna_buff = NULL;
+	orig_node->tt_buff = NULL;
 	orig_node->bcast_seqno_reset = jiffies - 1
 					- msecs_to_jiffies(RESET_PROTECTION_MS);
 	orig_node->batman_seqno_reset = jiffies - 1
@@ -317,8 +323,8 @@ static bool purge_orig_node(struct bat_priv *bat_priv,
 							&best_neigh_node)) {
 			update_routes(bat_priv, orig_node,
 				      best_neigh_node,
-				      orig_node->hna_buff,
-				      orig_node->hna_buff_len);
+				      orig_node->tt_buff,
+				      orig_node->tt_buff_len);
 		}
 	}
 
@@ -389,29 +395,34 @@ int orig_seq_print_text(struct seq_file *seq, void *offset)
 	struct hashtable_t *hash = bat_priv->orig_hash;
 	struct hlist_node *node, *node_tmp;
 	struct hlist_head *head;
+	struct hard_iface *primary_if;
 	struct orig_node *orig_node;
-	struct neigh_node *neigh_node;
+	struct neigh_node *neigh_node, *neigh_node_tmp;
 	int batman_count = 0;
 	int last_seen_secs;
 	int last_seen_msecs;
-	int i;
+	int i, ret = 0;
+
+	primary_if = primary_if_get_selected(bat_priv);
 
-	if ((!bat_priv->primary_if) ||
-	    (bat_priv->primary_if->if_status != IF_ACTIVE)) {
-		if (!bat_priv->primary_if)
-			return seq_printf(seq, "BATMAN mesh %s disabled - "
-				     "please specify interfaces to enable it\n",
-				     net_dev->name);
+	if (!primary_if) {
+		ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+				 "please specify interfaces to enable it\n",
+				 net_dev->name);
+		goto out;
+	}
 
-		return seq_printf(seq, "BATMAN mesh %s "
-				  "disabled - primary interface not active\n",
-				  net_dev->name);
+	if (primary_if->if_status != IF_ACTIVE) {
+		ret = seq_printf(seq, "BATMAN mesh %s "
+				 "disabled - primary interface not active\n",
+				 net_dev->name);
+		goto out;
 	}
 
 	seq_printf(seq, "[B.A.T.M.A.N. adv %s%s, MainIF/MAC: %s/%pM (%s)]\n",
 		   SOURCE_VERSION, REVISION_VERSION_STR,
-		   bat_priv->primary_if->net_dev->name,
-		   bat_priv->primary_if->net_dev->dev_addr, net_dev->name);
+		   primary_if->net_dev->name,
+		   primary_if->net_dev->dev_addr, net_dev->name);
 	seq_printf(seq, "  %-15s %s (%s/%i) %17s [%10s]: %20s ...\n",
 		   "Originator", "last-seen", "#", TQ_MAX_VALUE, "Nexthop",
 		   "outgoingIF", "Potential nexthops");
@@ -421,40 +432,47 @@ int orig_seq_print_text(struct seq_file *seq, void *offset)
 
 		rcu_read_lock();
 		hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) {
-			if (!orig_node->router)
+			neigh_node = orig_node_get_router(orig_node);
+			if (!neigh_node)
 				continue;
 
-			if (orig_node->router->tq_avg == 0)
-				continue;
+			if (neigh_node->tq_avg == 0)
+				goto next;
 
 			last_seen_secs = jiffies_to_msecs(jiffies -
 						orig_node->last_valid) / 1000;
 			last_seen_msecs = jiffies_to_msecs(jiffies -
 						orig_node->last_valid) % 1000;
 
-			neigh_node = orig_node->router;
 			seq_printf(seq, "%pM %4i.%03is   (%3i) %pM [%10s]:",
 				   orig_node->orig, last_seen_secs,
 				   last_seen_msecs, neigh_node->tq_avg,
 				   neigh_node->addr,
 				   neigh_node->if_incoming->net_dev->name);
 
-			hlist_for_each_entry_rcu(neigh_node, node_tmp,
+			hlist_for_each_entry_rcu(neigh_node_tmp, node_tmp,
 						 &orig_node->neigh_list, list) {
-				seq_printf(seq, " %pM (%3i)", neigh_node->addr,
-						neigh_node->tq_avg);
+				seq_printf(seq, " %pM (%3i)",
+					   neigh_node_tmp->addr,
+					   neigh_node_tmp->tq_avg);
 			}
 
 			seq_printf(seq, "\n");
 			batman_count++;
+
+next:
+			neigh_node_free_ref(neigh_node);
 		}
 		rcu_read_unlock();
 	}
 
-	if ((batman_count == 0))
+	if (batman_count == 0)
 		seq_printf(seq, "No batman nodes in range ...\n");
 
-	return 0;
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	return ret;
 }
 
 static int orig_node_add_if(struct orig_node *orig_node, int max_if_num)
diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h
index 5cc011057da..e1d641f27aa 100644
--- a/net/batman-adv/originator.h
+++ b/net/batman-adv/originator.h
@@ -34,6 +34,7 @@ struct neigh_node *create_neighbor(struct orig_node *orig_node,
 				   uint8_t *neigh,
 				   struct hard_iface *if_incoming);
 void neigh_node_free_ref(struct neigh_node *neigh_node);
+struct neigh_node *orig_node_get_router(struct orig_node *orig_node);
 int orig_seq_print_text(struct seq_file *seq, void *offset);
 int orig_hash_add_if(struct hard_iface *hard_iface, int max_if_num);
 int orig_hash_del_if(struct hard_iface *hard_iface, int max_if_num);
diff --git a/net/batman-adv/packet.h b/net/batman-adv/packet.h
index e7571879af3..eda99650e9f 100644
--- a/net/batman-adv/packet.h
+++ b/net/batman-adv/packet.h
@@ -61,7 +61,7 @@ struct batman_packet {
 	uint8_t  orig[6];
 	uint8_t  prev_sender[6];
 	uint8_t  ttl;
-	uint8_t  num_hna;
+	uint8_t  num_tt;
 	uint8_t  gw_flags;  /* flags related to gateway class */
 	uint8_t  align;
 } __packed;
@@ -128,8 +128,7 @@ struct vis_packet {
 	uint8_t  entries;	 /* number of entries behind this struct */
 	uint32_t seqno;		 /* sequence number */
 	uint8_t  ttl;		 /* TTL */
-	uint8_t  vis_orig[6];	 /* originator that informs about its
-				  * neighbors */
+	uint8_t  vis_orig[6];	 /* originator that announces its neighbors */
 	uint8_t  target_orig[6]; /* who should receive this packet */
 	uint8_t  sender_orig[6]; /* who sent or rebroadcasted this packet */
 } __packed;
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index c172f5d0e05..bb1c3ec7e3f 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -64,80 +64,97 @@ void slide_own_bcast_window(struct hard_iface *hard_iface)
 	}
 }
 
-static void update_HNA(struct bat_priv *bat_priv, struct orig_node *orig_node,
-		       unsigned char *hna_buff, int hna_buff_len)
+static void update_TT(struct bat_priv *bat_priv, struct orig_node *orig_node,
+		       unsigned char *tt_buff, int tt_buff_len)
 {
-	if ((hna_buff_len != orig_node->hna_buff_len) ||
-	    ((hna_buff_len > 0) &&
-	     (orig_node->hna_buff_len > 0) &&
-	     (memcmp(orig_node->hna_buff, hna_buff, hna_buff_len) != 0))) {
-
-		if (orig_node->hna_buff_len > 0)
-			hna_global_del_orig(bat_priv, orig_node,
-					    "originator changed hna");
-
-		if ((hna_buff_len > 0) && (hna_buff))
-			hna_global_add_orig(bat_priv, orig_node,
-					    hna_buff, hna_buff_len);
+	if ((tt_buff_len != orig_node->tt_buff_len) ||
+	    ((tt_buff_len > 0) &&
+	     (orig_node->tt_buff_len > 0) &&
+	     (memcmp(orig_node->tt_buff, tt_buff, tt_buff_len) != 0))) {
+
+		if (orig_node->tt_buff_len > 0)
+			tt_global_del_orig(bat_priv, orig_node,
+					    "originator changed tt");
+
+		if ((tt_buff_len > 0) && (tt_buff))
+			tt_global_add_orig(bat_priv, orig_node,
+					    tt_buff, tt_buff_len);
 	}
 }
 
 static void update_route(struct bat_priv *bat_priv,
 			 struct orig_node *orig_node,
 			 struct neigh_node *neigh_node,
-			 unsigned char *hna_buff, int hna_buff_len)
+			 unsigned char *tt_buff, int tt_buff_len)
 {
-	struct neigh_node *neigh_node_tmp;
+	struct neigh_node *curr_router;
+
+	curr_router = orig_node_get_router(orig_node);
 
 	/* route deleted */
-	if ((orig_node->router) && (!neigh_node)) {
+	if ((curr_router) && (!neigh_node)) {
 
 		bat_dbg(DBG_ROUTES, bat_priv, "Deleting route towards: %pM\n",
 			orig_node->orig);
-		hna_global_del_orig(bat_priv, orig_node,
+		tt_global_del_orig(bat_priv, orig_node,
 				    "originator timed out");
 
-		/* route added */
-	} else if ((!orig_node->router) && (neigh_node)) {
+	/* route added */
+	} else if ((!curr_router) && (neigh_node)) {
 
 		bat_dbg(DBG_ROUTES, bat_priv,
 			"Adding route towards: %pM (via %pM)\n",
 			orig_node->orig, neigh_node->addr);
-		hna_global_add_orig(bat_priv, orig_node,
-				    hna_buff, hna_buff_len);
+		tt_global_add_orig(bat_priv, orig_node,
+				    tt_buff, tt_buff_len);
 
-		/* route changed */
+	/* route changed */
 	} else {
 		bat_dbg(DBG_ROUTES, bat_priv,
 			"Changing route towards: %pM "
 			"(now via %pM - was via %pM)\n",
 			orig_node->orig, neigh_node->addr,
-			orig_node->router->addr);
+			curr_router->addr);
 	}
 
+	if (curr_router)
+		neigh_node_free_ref(curr_router);
+
+	/* increase refcount of new best neighbor */
 	if (neigh_node && !atomic_inc_not_zero(&neigh_node->refcount))
 		neigh_node = NULL;
-	neigh_node_tmp = orig_node->router;
-	orig_node->router = neigh_node;
-	if (neigh_node_tmp)
-		neigh_node_free_ref(neigh_node_tmp);
+
+	spin_lock_bh(&orig_node->neigh_list_lock);
+	rcu_assign_pointer(orig_node->router, neigh_node);
+	spin_unlock_bh(&orig_node->neigh_list_lock);
+
+	/* decrease refcount of previous best neighbor */
+	if (curr_router)
+		neigh_node_free_ref(curr_router);
 }
 
 
 void update_routes(struct bat_priv *bat_priv, struct orig_node *orig_node,
-		   struct neigh_node *neigh_node, unsigned char *hna_buff,
-		   int hna_buff_len)
+		   struct neigh_node *neigh_node, unsigned char *tt_buff,
+		   int tt_buff_len)
 {
+	struct neigh_node *router = NULL;
 
 	if (!orig_node)
-		return;
+		goto out;
+
+	router = orig_node_get_router(orig_node);
 
-	if (orig_node->router != neigh_node)
+	if (router != neigh_node)
 		update_route(bat_priv, orig_node, neigh_node,
-			     hna_buff, hna_buff_len);
-	/* may be just HNA changed */
+			     tt_buff, tt_buff_len);
+	/* may be just TT changed */
 	else
-		update_HNA(bat_priv, orig_node, hna_buff, hna_buff_len);
+		update_TT(bat_priv, orig_node, tt_buff, tt_buff_len);
+
+out:
+	if (router)
+		neigh_node_free_ref(router);
 }
 
 static int is_bidirectional_neigh(struct orig_node *orig_node,
@@ -152,65 +169,41 @@ static int is_bidirectional_neigh(struct orig_node *orig_node,
 	uint8_t orig_eq_count, neigh_rq_count, tq_own;
 	int tq_asym_penalty, ret = 0;
 
-	if (orig_node == orig_neigh_node) {
-		rcu_read_lock();
-		hlist_for_each_entry_rcu(tmp_neigh_node, node,
-					 &orig_node->neigh_list, list) {
-
-			if (!compare_eth(tmp_neigh_node->addr,
-					 orig_neigh_node->orig))
-				continue;
-
-			if (tmp_neigh_node->if_incoming != if_incoming)
-				continue;
-
-			if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
-				continue;
-
-			neigh_node = tmp_neigh_node;
-		}
-		rcu_read_unlock();
+	/* find corresponding one hop neighbor */
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(tmp_neigh_node, node,
+				 &orig_neigh_node->neigh_list, list) {
 
-		if (!neigh_node)
-			neigh_node = create_neighbor(orig_node,
-						     orig_neigh_node,
-						     orig_neigh_node->orig,
-						     if_incoming);
-		if (!neigh_node)
-			goto out;
+		if (!compare_eth(tmp_neigh_node->addr, orig_neigh_node->orig))
+			continue;
 
-		neigh_node->last_valid = jiffies;
-	} else {
-		/* find packet count of corresponding one hop neighbor */
-		rcu_read_lock();
-		hlist_for_each_entry_rcu(tmp_neigh_node, node,
-					 &orig_neigh_node->neigh_list, list) {
+		if (tmp_neigh_node->if_incoming != if_incoming)
+			continue;
 
-			if (!compare_eth(tmp_neigh_node->addr,
-					 orig_neigh_node->orig))
-				continue;
+		if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
+			continue;
 
-			if (tmp_neigh_node->if_incoming != if_incoming)
-				continue;
+		neigh_node = tmp_neigh_node;
+		break;
+	}
+	rcu_read_unlock();
 
-			if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
-				continue;
+	if (!neigh_node)
+		neigh_node = create_neighbor(orig_neigh_node,
+					     orig_neigh_node,
+					     orig_neigh_node->orig,
+					     if_incoming);
 
-			neigh_node = tmp_neigh_node;
-		}
-		rcu_read_unlock();
+	if (!neigh_node)
+		goto out;
 
-		if (!neigh_node)
-			neigh_node = create_neighbor(orig_neigh_node,
-						     orig_neigh_node,
-						     orig_neigh_node->orig,
-						     if_incoming);
-		if (!neigh_node)
-			goto out;
-	}
+	/* if orig_node is direct neighbour update neigh_node last_valid */
+	if (orig_node == orig_neigh_node)
+		neigh_node->last_valid = jiffies;
 
 	orig_node->last_valid = jiffies;
 
+	/* find packet count of corresponding one hop neighbor */
 	spin_lock_bh(&orig_node->ogm_cnt_lock);
 	orig_eq_count = orig_neigh_node->bcast_own_sum[if_incoming->if_num];
 	neigh_rq_count = neigh_node->real_packet_count;
@@ -288,8 +281,8 @@ static void bonding_candidate_add(struct orig_node *orig_node,
 				  struct neigh_node *neigh_node)
 {
 	struct hlist_node *node;
-	struct neigh_node *tmp_neigh_node;
-	uint8_t best_tq, interference_candidate = 0;
+	struct neigh_node *tmp_neigh_node, *router = NULL;
+	uint8_t interference_candidate = 0;
 
 	spin_lock_bh(&orig_node->neigh_list_lock);
 
@@ -298,13 +291,12 @@ static void bonding_candidate_add(struct orig_node *orig_node,
 			 neigh_node->orig_node->primary_addr))
 		goto candidate_del;
 
-	if (!orig_node->router)
+	router = orig_node_get_router(orig_node);
+	if (!router)
 		goto candidate_del;
 
-	best_tq = orig_node->router->tq_avg;
-
 	/* ... and is good enough to be considered */
-	if (neigh_node->tq_avg < best_tq - BONDING_TQ_THRESHOLD)
+	if (neigh_node->tq_avg < router->tq_avg - BONDING_TQ_THRESHOLD)
 		goto candidate_del;
 
 	/**
@@ -350,7 +342,9 @@ candidate_del:
 
 out:
 	spin_unlock_bh(&orig_node->neigh_list_lock);
-	return;
+
+	if (router)
+		neigh_node_free_ref(router);
 }
 
 /* copy primary address for bonding */
@@ -369,13 +363,14 @@ static void update_orig(struct bat_priv *bat_priv,
 			struct ethhdr *ethhdr,
 			struct batman_packet *batman_packet,
 			struct hard_iface *if_incoming,
-			unsigned char *hna_buff, int hna_buff_len,
+			unsigned char *tt_buff, int tt_buff_len,
 			char is_duplicate)
 {
 	struct neigh_node *neigh_node = NULL, *tmp_neigh_node = NULL;
+	struct neigh_node *router = NULL;
 	struct orig_node *orig_node_tmp;
 	struct hlist_node *node;
-	int tmp_hna_buff_len;
+	int tmp_tt_buff_len;
 	uint8_t bcast_own_sum_orig, bcast_own_sum_neigh;
 
 	bat_dbg(DBG_BATMAN, bat_priv, "update_originator(): "
@@ -396,10 +391,12 @@ static void update_orig(struct bat_priv *bat_priv,
 		if (is_duplicate)
 			continue;
 
+		spin_lock_bh(&tmp_neigh_node->tq_lock);
 		ring_buffer_set(tmp_neigh_node->tq_recv,
 				&tmp_neigh_node->tq_index, 0);
 		tmp_neigh_node->tq_avg =
 			ring_buffer_avg(tmp_neigh_node->tq_recv);
+		spin_unlock_bh(&tmp_neigh_node->tq_lock);
 	}
 
 	if (!neigh_node) {
@@ -424,10 +421,12 @@ static void update_orig(struct bat_priv *bat_priv,
 	orig_node->flags = batman_packet->flags;
 	neigh_node->last_valid = jiffies;
 
+	spin_lock_bh(&neigh_node->tq_lock);
 	ring_buffer_set(neigh_node->tq_recv,
 			&neigh_node->tq_index,
 			batman_packet->tq);
 	neigh_node->tq_avg = ring_buffer_avg(neigh_node->tq_recv);
+	spin_unlock_bh(&neigh_node->tq_lock);
 
 	if (!is_duplicate) {
 		orig_node->last_ttl = batman_packet->ttl;
@@ -436,24 +435,23 @@ static void update_orig(struct bat_priv *bat_priv,
 
 	bonding_candidate_add(orig_node, neigh_node);
 
-	tmp_hna_buff_len = (hna_buff_len > batman_packet->num_hna * ETH_ALEN ?
-			    batman_packet->num_hna * ETH_ALEN : hna_buff_len);
+	tmp_tt_buff_len = (tt_buff_len > batman_packet->num_tt * ETH_ALEN ?
+			    batman_packet->num_tt * ETH_ALEN : tt_buff_len);
 
 	/* if this neighbor already is our next hop there is nothing
 	 * to change */
-	if (orig_node->router == neigh_node)
-		goto update_hna;
+	router = orig_node_get_router(orig_node);
+	if (router == neigh_node)
+		goto update_tt;
 
 	/* if this neighbor does not offer a better TQ we won't consider it */
-	if ((orig_node->router) &&
-	    (orig_node->router->tq_avg > neigh_node->tq_avg))
-		goto update_hna;
+	if (router && (router->tq_avg > neigh_node->tq_avg))
+		goto update_tt;
 
 	/* if the TQ is the same and the link not more symetric we
 	 * won't consider it either */
-	if ((orig_node->router) &&
-	     (neigh_node->tq_avg == orig_node->router->tq_avg)) {
-		orig_node_tmp = orig_node->router->orig_node;
+	if (router && (neigh_node->tq_avg == router->tq_avg)) {
+		orig_node_tmp = router->orig_node;
 		spin_lock_bh(&orig_node_tmp->ogm_cnt_lock);
 		bcast_own_sum_orig =
 			orig_node_tmp->bcast_own_sum[if_incoming->if_num];
@@ -466,16 +464,16 @@ static void update_orig(struct bat_priv *bat_priv,
 		spin_unlock_bh(&orig_node_tmp->ogm_cnt_lock);
 
 		if (bcast_own_sum_orig >= bcast_own_sum_neigh)
-			goto update_hna;
+			goto update_tt;
 	}
 
 	update_routes(bat_priv, orig_node, neigh_node,
-		      hna_buff, tmp_hna_buff_len);
+		      tt_buff, tmp_tt_buff_len);
 	goto update_gw;
 
-update_hna:
-	update_routes(bat_priv, orig_node, orig_node->router,
-		      hna_buff, tmp_hna_buff_len);
+update_tt:
+	update_routes(bat_priv, orig_node, router,
+		      tt_buff, tmp_tt_buff_len);
 
 update_gw:
 	if (orig_node->gw_flags != batman_packet->gw_flags)
@@ -496,6 +494,8 @@ unlock:
 out:
 	if (neigh_node)
 		neigh_node_free_ref(neigh_node);
+	if (router)
+		neigh_node_free_ref(router);
 }
 
 /* checks whether the host restarted and is in the protection time.
@@ -597,12 +597,14 @@ out:
 
 void receive_bat_packet(struct ethhdr *ethhdr,
 			struct batman_packet *batman_packet,
-			unsigned char *hna_buff, int hna_buff_len,
+			unsigned char *tt_buff, int tt_buff_len,
 			struct hard_iface *if_incoming)
 {
 	struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
 	struct hard_iface *hard_iface;
 	struct orig_node *orig_neigh_node, *orig_node;
+	struct neigh_node *router = NULL, *router_router = NULL;
+	struct neigh_node *orig_neigh_router = NULL;
 	char has_directlink_flag;
 	char is_my_addr = 0, is_my_orig = 0, is_my_oldorig = 0;
 	char is_broadcast = 0, is_bidirectional, is_single_hop_neigh;
@@ -747,14 +749,15 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 		goto out;
 	}
 
+	router = orig_node_get_router(orig_node);
+	if (router)
+		router_router = orig_node_get_router(router->orig_node);
+
 	/* avoid temporary routing loops */
-	if ((orig_node->router) &&
-	    (orig_node->router->orig_node->router) &&
-	    (compare_eth(orig_node->router->addr,
-			 batman_packet->prev_sender)) &&
+	if (router && router_router &&
+	    (compare_eth(router->addr, batman_packet->prev_sender)) &&
 	    !(compare_eth(batman_packet->orig, batman_packet->prev_sender)) &&
-	    (compare_eth(orig_node->router->addr,
-			 orig_node->router->orig_node->router->addr))) {
+	    (compare_eth(router->addr, router_router->addr))) {
 		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: ignoring all rebroadcast packets that "
 			"may make me loop (sender: %pM)\n", ethhdr->h_source);
@@ -769,9 +772,11 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 	if (!orig_neigh_node)
 		goto out;
 
+	orig_neigh_router = orig_node_get_router(orig_neigh_node);
+
 	/* drop packet if sender is not a direct neighbor and if we
 	 * don't route towards it */
-	if (!is_single_hop_neigh && (!orig_neigh_node->router)) {
+	if (!is_single_hop_neigh && (!orig_neigh_router)) {
 		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: OGM via unknown neighbor!\n");
 		goto out_neigh;
@@ -789,14 +794,14 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 	     ((orig_node->last_real_seqno == batman_packet->seqno) &&
 	      (orig_node->last_ttl - 3 <= batman_packet->ttl))))
 		update_orig(bat_priv, orig_node, ethhdr, batman_packet,
-			    if_incoming, hna_buff, hna_buff_len, is_duplicate);
+			    if_incoming, tt_buff, tt_buff_len, is_duplicate);
 
 	/* is single hop (direct) neighbor */
 	if (is_single_hop_neigh) {
 
 		/* mark direct link on incoming interface */
 		schedule_forward_packet(orig_node, ethhdr, batman_packet,
-					1, hna_buff_len, if_incoming);
+					1, tt_buff_len, if_incoming);
 
 		bat_dbg(DBG_BATMAN, bat_priv, "Forwarding packet: "
 			"rebroadcast neighbor packet with direct link flag\n");
@@ -819,12 +824,19 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 	bat_dbg(DBG_BATMAN, bat_priv,
 		"Forwarding packet: rebroadcast originator packet\n");
 	schedule_forward_packet(orig_node, ethhdr, batman_packet,
-				0, hna_buff_len, if_incoming);
+				0, tt_buff_len, if_incoming);
 
 out_neigh:
 	if ((orig_neigh_node) && (!is_single_hop_neigh))
 		orig_node_free_ref(orig_neigh_node);
 out:
+	if (router)
+		neigh_node_free_ref(router);
+	if (router_router)
+		neigh_node_free_ref(router_router);
+	if (orig_neigh_router)
+		neigh_node_free_ref(orig_neigh_router);
+
 	orig_node_free_ref(orig_node);
 }
 
@@ -868,8 +880,9 @@ int recv_bat_packet(struct sk_buff *skb, struct hard_iface *hard_iface)
 static int recv_my_icmp_packet(struct bat_priv *bat_priv,
 			       struct sk_buff *skb, size_t icmp_len)
 {
+	struct hard_iface *primary_if = NULL;
 	struct orig_node *orig_node = NULL;
-	struct neigh_node *neigh_node = NULL;
+	struct neigh_node *router = NULL;
 	struct icmp_packet_rr *icmp_packet;
 	int ret = NET_RX_DROP;
 
@@ -881,28 +894,19 @@ static int recv_my_icmp_packet(struct bat_priv *bat_priv,
 		goto out;
 	}
 
-	if (!bat_priv->primary_if)
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
 		goto out;
 
 	/* answer echo request (ping) */
 	/* get routing information */
-	rcu_read_lock();
 	orig_node = orig_hash_find(bat_priv, icmp_packet->orig);
-
 	if (!orig_node)
-		goto unlock;
-
-	neigh_node = orig_node->router;
-
-	if (!neigh_node)
-		goto unlock;
-
-	if (!atomic_inc_not_zero(&neigh_node->refcount)) {
-		neigh_node = NULL;
-		goto unlock;
-	}
+		goto out;
 
-	rcu_read_unlock();
+	router = orig_node_get_router(orig_node);
+	if (!router)
+		goto out;
 
 	/* create a copy of the skb, if needed, to modify it. */
 	if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
@@ -911,20 +915,18 @@ static int recv_my_icmp_packet(struct bat_priv *bat_priv,
 	icmp_packet = (struct icmp_packet_rr *)skb->data;
 
 	memcpy(icmp_packet->dst, icmp_packet->orig, ETH_ALEN);
-	memcpy(icmp_packet->orig,
-		bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+	memcpy(icmp_packet->orig, primary_if->net_dev->dev_addr, ETH_ALEN);
 	icmp_packet->msg_type = ECHO_REPLY;
 	icmp_packet->ttl = TTL;
 
-	send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
+	send_skb_packet(skb, router->if_incoming, router->addr);
 	ret = NET_RX_SUCCESS;
-	goto out;
 
-unlock:
-	rcu_read_unlock();
 out:
-	if (neigh_node)
-		neigh_node_free_ref(neigh_node);
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	if (router)
+		neigh_node_free_ref(router);
 	if (orig_node)
 		orig_node_free_ref(orig_node);
 	return ret;
@@ -933,8 +935,9 @@ out:
 static int recv_icmp_ttl_exceeded(struct bat_priv *bat_priv,
 				  struct sk_buff *skb)
 {
+	struct hard_iface *primary_if = NULL;
 	struct orig_node *orig_node = NULL;
-	struct neigh_node *neigh_node = NULL;
+	struct neigh_node *router = NULL;
 	struct icmp_packet *icmp_packet;
 	int ret = NET_RX_DROP;
 
@@ -948,27 +951,18 @@ static int recv_icmp_ttl_exceeded(struct bat_priv *bat_priv,
 		goto out;
 	}
 
-	if (!bat_priv->primary_if)
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
 		goto out;
 
 	/* get routing information */
-	rcu_read_lock();
 	orig_node = orig_hash_find(bat_priv, icmp_packet->orig);
-
 	if (!orig_node)
-		goto unlock;
-
-	neigh_node = orig_node->router;
-
-	if (!neigh_node)
-		goto unlock;
-
-	if (!atomic_inc_not_zero(&neigh_node->refcount)) {
-		neigh_node = NULL;
-		goto unlock;
-	}
+		goto out;
 
-	rcu_read_unlock();
+	router = orig_node_get_router(orig_node);
+	if (!router)
+		goto out;
 
 	/* create a copy of the skb, if needed, to modify it. */
 	if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
@@ -977,20 +971,18 @@ static int recv_icmp_ttl_exceeded(struct bat_priv *bat_priv,
 	icmp_packet = (struct icmp_packet *)skb->data;
 
 	memcpy(icmp_packet->dst, icmp_packet->orig, ETH_ALEN);
-	memcpy(icmp_packet->orig,
-		bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+	memcpy(icmp_packet->orig, primary_if->net_dev->dev_addr, ETH_ALEN);
 	icmp_packet->msg_type = TTL_EXCEEDED;
 	icmp_packet->ttl = TTL;
 
-	send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
+	send_skb_packet(skb, router->if_incoming, router->addr);
 	ret = NET_RX_SUCCESS;
-	goto out;
 
-unlock:
-	rcu_read_unlock();
 out:
-	if (neigh_node)
-		neigh_node_free_ref(neigh_node);
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	if (router)
+		neigh_node_free_ref(router);
 	if (orig_node)
 		orig_node_free_ref(orig_node);
 	return ret;
@@ -1003,7 +995,7 @@ int recv_icmp_packet(struct sk_buff *skb, struct hard_iface *recv_if)
 	struct icmp_packet_rr *icmp_packet;
 	struct ethhdr *ethhdr;
 	struct orig_node *orig_node = NULL;
-	struct neigh_node *neigh_node = NULL;
+	struct neigh_node *router = NULL;
 	int hdr_size = sizeof(struct icmp_packet);
 	int ret = NET_RX_DROP;
 
@@ -1050,23 +1042,13 @@ int recv_icmp_packet(struct sk_buff *skb, struct hard_iface *recv_if)
 		return recv_icmp_ttl_exceeded(bat_priv, skb);
 
 	/* get routing information */
-	rcu_read_lock();
 	orig_node = orig_hash_find(bat_priv, icmp_packet->dst);
-
 	if (!orig_node)
-		goto unlock;
-
-	neigh_node = orig_node->router;
-
-	if (!neigh_node)
-		goto unlock;
-
-	if (!atomic_inc_not_zero(&neigh_node->refcount)) {
-		neigh_node = NULL;
-		goto unlock;
-	}
+		goto out;
 
-	rcu_read_unlock();
+	router = orig_node_get_router(orig_node);
+	if (!router)
+		goto out;
 
 	/* create a copy of the skb, if needed, to modify it. */
 	if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
@@ -1078,20 +1060,117 @@ int recv_icmp_packet(struct sk_buff *skb, struct hard_iface *recv_if)
 	icmp_packet->ttl--;
 
 	/* route it */
-	send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
+	send_skb_packet(skb, router->if_incoming, router->addr);
 	ret = NET_RX_SUCCESS;
-	goto out;
 
-unlock:
-	rcu_read_unlock();
 out:
-	if (neigh_node)
-		neigh_node_free_ref(neigh_node);
+	if (router)
+		neigh_node_free_ref(router);
 	if (orig_node)
 		orig_node_free_ref(orig_node);
 	return ret;
 }
 
+/* In the bonding case, send the packets in a round
+ * robin fashion over the remaining interfaces.
+ *
+ * This method rotates the bonding list and increases the
+ * returned router's refcount. */
+static struct neigh_node *find_bond_router(struct orig_node *primary_orig,
+					   struct hard_iface *recv_if)
+{
+	struct neigh_node *tmp_neigh_node;
+	struct neigh_node *router = NULL, *first_candidate = NULL;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(tmp_neigh_node, &primary_orig->bond_list,
+				bonding_list) {
+		if (!first_candidate)
+			first_candidate = tmp_neigh_node;
+
+		/* recv_if == NULL on the first node. */
+		if (tmp_neigh_node->if_incoming == recv_if)
+			continue;
+
+		if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
+			continue;
+
+		router = tmp_neigh_node;
+		break;
+	}
+
+	/* use the first candidate if nothing was found. */
+	if (!router && first_candidate &&
+	    atomic_inc_not_zero(&first_candidate->refcount))
+		router = first_candidate;
+
+	if (!router)
+		goto out;
+
+	/* selected should point to the next element
+	 * after the current router */
+	spin_lock_bh(&primary_orig->neigh_list_lock);
+	/* this is a list_move(), which unfortunately
+	 * does not exist as rcu version */
+	list_del_rcu(&primary_orig->bond_list);
+	list_add_rcu(&primary_orig->bond_list,
+		     &router->bonding_list);
+	spin_unlock_bh(&primary_orig->neigh_list_lock);
+
+out:
+	rcu_read_unlock();
+	return router;
+}
+
+/* Interface Alternating: Use the best of the
+ * remaining candidates which are not using
+ * this interface.
+ *
+ * Increases the returned router's refcount */
+static struct neigh_node *find_ifalter_router(struct orig_node *primary_orig,
+					      struct hard_iface *recv_if)
+{
+	struct neigh_node *tmp_neigh_node;
+	struct neigh_node *router = NULL, *first_candidate = NULL;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(tmp_neigh_node, &primary_orig->bond_list,
+				bonding_list) {
+		if (!first_candidate)
+			first_candidate = tmp_neigh_node;
+
+		/* recv_if == NULL on the first node. */
+		if (tmp_neigh_node->if_incoming == recv_if)
+			continue;
+
+		if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
+			continue;
+
+		/* if we don't have a router yet
+		 * or this one is better, choose it. */
+		if ((!router) ||
+		    (tmp_neigh_node->tq_avg > router->tq_avg)) {
+			/* decrement refcount of
+			 * previously selected router */
+			if (router)
+				neigh_node_free_ref(router);
+
+			router = tmp_neigh_node;
+			atomic_inc_not_zero(&router->refcount);
+		}
+
+		neigh_node_free_ref(tmp_neigh_node);
+	}
+
+	/* use the first candidate if nothing was found. */
+	if (!router && first_candidate &&
+	    atomic_inc_not_zero(&first_candidate->refcount))
+		router = first_candidate;
+
+	rcu_read_unlock();
+	return router;
+}
+
 /* find a suitable router for this originator, and use
  * bonding if possible. increases the found neighbors
  * refcount.*/
@@ -1101,15 +1180,16 @@ struct neigh_node *find_router(struct bat_priv *bat_priv,
 {
 	struct orig_node *primary_orig_node;
 	struct orig_node *router_orig;
-	struct neigh_node *router, *first_candidate, *tmp_neigh_node;
+	struct neigh_node *router;
 	static uint8_t zero_mac[ETH_ALEN] = {0, 0, 0, 0, 0, 0};
 	int bonding_enabled;
 
 	if (!orig_node)
 		return NULL;
 
-	if (!orig_node->router)
-		return NULL;
+	router = orig_node_get_router(orig_node);
+	if (!router)
+		goto err;
 
 	/* without bonding, the first node should
 	 * always choose the default router. */
@@ -1117,12 +1197,9 @@ struct neigh_node *find_router(struct bat_priv *bat_priv,
 
 	rcu_read_lock();
 	/* select default router to output */
-	router = orig_node->router;
-	router_orig = orig_node->router->orig_node;
-	if (!router_orig || !atomic_inc_not_zero(&router->refcount)) {
-		rcu_read_unlock();
-		return NULL;
-	}
+	router_orig = router->orig_node;
+	if (!router_orig)
+		goto err_unlock;
 
 	if ((!recv_if) && (!bonding_enabled))
 		goto return_router;
@@ -1151,91 +1228,26 @@ struct neigh_node *find_router(struct bat_priv *bat_priv,
 	if (atomic_read(&primary_orig_node->bond_candidates) < 2)
 		goto return_router;
 
-
 	/* all nodes between should choose a candidate which
 	 * is is not on the interface where the packet came
 	 * in. */
 
 	neigh_node_free_ref(router);
-	first_candidate = NULL;
-	router = NULL;
-
-	if (bonding_enabled) {
-		/* in the bonding case, send the packets in a round
-		 * robin fashion over the remaining interfaces. */
-
-		list_for_each_entry_rcu(tmp_neigh_node,
-				&primary_orig_node->bond_list, bonding_list) {
-			if (!first_candidate)
-				first_candidate = tmp_neigh_node;
-			/* recv_if == NULL on the first node. */
-			if (tmp_neigh_node->if_incoming != recv_if &&
-			    atomic_inc_not_zero(&tmp_neigh_node->refcount)) {
-				router = tmp_neigh_node;
-				break;
-			}
-		}
-
-		/* use the first candidate if nothing was found. */
-		if (!router && first_candidate &&
-		    atomic_inc_not_zero(&first_candidate->refcount))
-			router = first_candidate;
 
-		if (!router) {
-			rcu_read_unlock();
-			return NULL;
-		}
-
-		/* selected should point to the next element
-		 * after the current router */
-		spin_lock_bh(&primary_orig_node->neigh_list_lock);
-		/* this is a list_move(), which unfortunately
-		 * does not exist as rcu version */
-		list_del_rcu(&primary_orig_node->bond_list);
-		list_add_rcu(&primary_orig_node->bond_list,
-				&router->bonding_list);
-		spin_unlock_bh(&primary_orig_node->neigh_list_lock);
-
-	} else {
-		/* if bonding is disabled, use the best of the
-		 * remaining candidates which are not using
-		 * this interface. */
-		list_for_each_entry_rcu(tmp_neigh_node,
-			&primary_orig_node->bond_list, bonding_list) {
-			if (!first_candidate)
-				first_candidate = tmp_neigh_node;
-
-			/* recv_if == NULL on the first node. */
-			if (tmp_neigh_node->if_incoming == recv_if)
-				continue;
-
-			if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
-				continue;
-
-			/* if we don't have a router yet
-			 * or this one is better, choose it. */
-			if ((!router) ||
-			    (tmp_neigh_node->tq_avg > router->tq_avg)) {
-				/* decrement refcount of
-				 * previously selected router */
-				if (router)
-					neigh_node_free_ref(router);
-
-				router = tmp_neigh_node;
-				atomic_inc_not_zero(&router->refcount);
-			}
-
-			neigh_node_free_ref(tmp_neigh_node);
-		}
+	if (bonding_enabled)
+		router = find_bond_router(primary_orig_node, recv_if);
+	else
+		router = find_ifalter_router(primary_orig_node, recv_if);
 
-		/* use the first candidate if nothing was found. */
-		if (!router && first_candidate &&
-		    atomic_inc_not_zero(&first_candidate->refcount))
-			router = first_candidate;
-	}
 return_router:
 	rcu_read_unlock();
 	return router;
+err_unlock:
+	rcu_read_unlock();
+err:
+	if (router)
+		neigh_node_free_ref(router);
+	return NULL;
 }
 
 static int check_unicast_packet(struct sk_buff *skb, int hdr_size)
@@ -1284,13 +1296,10 @@ int route_unicast_packet(struct sk_buff *skb, struct hard_iface *recv_if)
 	}
 
 	/* get routing information */
-	rcu_read_lock();
 	orig_node = orig_hash_find(bat_priv, unicast_packet->dest);
 
 	if (!orig_node)
-		goto unlock;
-
-	rcu_read_unlock();
+		goto out;
 
 	/* find_router() increases neigh_nodes refcount if found. */
 	neigh_node = find_router(bat_priv, orig_node, recv_if);
@@ -1336,10 +1345,7 @@ int route_unicast_packet(struct sk_buff *skb, struct hard_iface *recv_if)
 	/* route it */
 	send_skb_packet(skb, neigh_node->if_incoming, neigh_node->addr);
 	ret = NET_RX_SUCCESS;
-	goto out;
 
-unlock:
-	rcu_read_unlock();
 out:
 	if (neigh_node)
 		neigh_node_free_ref(neigh_node);
@@ -1438,13 +1444,10 @@ int recv_bcast_packet(struct sk_buff *skb, struct hard_iface *recv_if)
 	if (bcast_packet->ttl < 2)
 		goto out;
 
-	rcu_read_lock();
 	orig_node = orig_hash_find(bat_priv, bcast_packet->orig);
 
 	if (!orig_node)
-		goto rcu_unlock;
-
-	rcu_read_unlock();
+		goto out;
 
 	spin_lock_bh(&orig_node->bcast_seqno_lock);
 
@@ -1475,9 +1478,6 @@ int recv_bcast_packet(struct sk_buff *skb, struct hard_iface *recv_if)
 	ret = NET_RX_SUCCESS;
 	goto out;
 
-rcu_unlock:
-	rcu_read_unlock();
-	goto out;
 spin_unlock:
 	spin_unlock_bh(&orig_node->bcast_seqno_lock);
 out:
diff --git a/net/batman-adv/routing.h b/net/batman-adv/routing.h
index b5a064c88a4..870f29842b2 100644
--- a/net/batman-adv/routing.h
+++ b/net/batman-adv/routing.h
@@ -25,11 +25,11 @@
 void slide_own_bcast_window(struct hard_iface *hard_iface);
 void receive_bat_packet(struct ethhdr *ethhdr,
 				struct batman_packet *batman_packet,
-				unsigned char *hna_buff, int hna_buff_len,
+				unsigned char *tt_buff, int tt_buff_len,
 				struct hard_iface *if_incoming);
 void update_routes(struct bat_priv *bat_priv, struct orig_node *orig_node,
-		   struct neigh_node *neigh_node, unsigned char *hna_buff,
-		   int hna_buff_len);
+		   struct neigh_node *neigh_node, unsigned char *tt_buff,
+		   int tt_buff_len);
 int route_unicast_packet(struct sk_buff *skb, struct hard_iface *recv_if);
 int recv_icmp_packet(struct sk_buff *skb, struct hard_iface *recv_if);
 int recv_unicast_packet(struct sk_buff *skb, struct hard_iface *recv_if);
diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c
index d49e54d932a..33779278f1b 100644
--- a/net/batman-adv/send.c
+++ b/net/batman-adv/send.c
@@ -121,7 +121,7 @@ static void send_packet_to_if(struct forw_packet *forw_packet,
 	/* adjust all flags and log packets */
 	while (aggregated_packet(buff_pos,
 				 forw_packet->packet_len,
-				 batman_packet->num_hna)) {
+				 batman_packet->num_tt)) {
 
 		/* we might have aggregated direct link packets with an
 		 * ordinary base packet */
@@ -146,7 +146,7 @@ static void send_packet_to_if(struct forw_packet *forw_packet,
 			hard_iface->net_dev->dev_addr);
 
 		buff_pos += sizeof(struct batman_packet) +
-			(batman_packet->num_hna * ETH_ALEN);
+			(batman_packet->num_tt * ETH_ALEN);
 		packet_num++;
 		batman_packet = (struct batman_packet *)
 			(forw_packet->skb->data + buff_pos);
@@ -222,7 +222,7 @@ static void rebuild_batman_packet(struct bat_priv *bat_priv,
 	struct batman_packet *batman_packet;
 
 	new_len = sizeof(struct batman_packet) +
-			(bat_priv->num_local_hna * ETH_ALEN);
+			(bat_priv->num_local_tt * ETH_ALEN);
 	new_buff = kmalloc(new_len, GFP_ATOMIC);
 
 	/* keep old buffer if kmalloc should fail */
@@ -231,7 +231,7 @@ static void rebuild_batman_packet(struct bat_priv *bat_priv,
 		       sizeof(struct batman_packet));
 		batman_packet = (struct batman_packet *)new_buff;
 
-		batman_packet->num_hna = hna_local_fill_buffer(bat_priv,
+		batman_packet->num_tt = tt_local_fill_buffer(bat_priv,
 				new_buff + sizeof(struct batman_packet),
 				new_len - sizeof(struct batman_packet));
 
@@ -244,6 +244,7 @@ static void rebuild_batman_packet(struct bat_priv *bat_priv,
 void schedule_own_packet(struct hard_iface *hard_iface)
 {
 	struct bat_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
+	struct hard_iface *primary_if;
 	unsigned long send_time;
 	struct batman_packet *batman_packet;
 	int vis_server;
@@ -253,6 +254,7 @@ void schedule_own_packet(struct hard_iface *hard_iface)
 		return;
 
 	vis_server = atomic_read(&bat_priv->vis_mode);
+	primary_if = primary_if_get_selected(bat_priv);
 
 	/**
 	 * the interface gets activated here to avoid race conditions between
@@ -264,9 +266,9 @@ void schedule_own_packet(struct hard_iface *hard_iface)
 	if (hard_iface->if_status == IF_TO_BE_ACTIVATED)
 		hard_iface->if_status = IF_ACTIVE;
 
-	/* if local hna has changed and interface is a primary interface */
-	if ((atomic_read(&bat_priv->hna_local_changed)) &&
-	    (hard_iface == bat_priv->primary_if))
+	/* if local tt has changed and interface is a primary interface */
+	if ((atomic_read(&bat_priv->tt_local_changed)) &&
+	    (hard_iface == primary_if))
 		rebuild_batman_packet(bat_priv, hard_iface);
 
 	/**
@@ -284,7 +286,7 @@ void schedule_own_packet(struct hard_iface *hard_iface)
 	else
 		batman_packet->flags &= ~VIS_SERVER;
 
-	if ((hard_iface == bat_priv->primary_if) &&
+	if ((hard_iface == primary_if) &&
 	    (atomic_read(&bat_priv->gw_mode) == GW_MODE_SERVER))
 		batman_packet->gw_flags =
 				(uint8_t)atomic_read(&bat_priv->gw_bandwidth);
@@ -299,15 +301,19 @@ void schedule_own_packet(struct hard_iface *hard_iface)
 			       hard_iface->packet_buff,
 			       hard_iface->packet_len,
 			       hard_iface, 1, send_time);
+
+	if (primary_if)
+		hardif_free_ref(primary_if);
 }
 
 void schedule_forward_packet(struct orig_node *orig_node,
 			     struct ethhdr *ethhdr,
 			     struct batman_packet *batman_packet,
-			     uint8_t directlink, int hna_buff_len,
+			     uint8_t directlink, int tt_buff_len,
 			     struct hard_iface *if_incoming)
 {
 	struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
+	struct neigh_node *router;
 	unsigned char in_tq, in_ttl, tq_avg = 0;
 	unsigned long send_time;
 
@@ -316,6 +322,8 @@ void schedule_forward_packet(struct orig_node *orig_node,
 		return;
 	}
 
+	router = orig_node_get_router(orig_node);
+
 	in_tq = batman_packet->tq;
 	in_ttl = batman_packet->ttl;
 
@@ -324,20 +332,22 @@ void schedule_forward_packet(struct orig_node *orig_node,
 
 	/* rebroadcast tq of our best ranking neighbor to ensure the rebroadcast
 	 * of our best tq value */
-	if ((orig_node->router) && (orig_node->router->tq_avg != 0)) {
+	if (router && router->tq_avg != 0) {
 
 		/* rebroadcast ogm of best ranking neighbor as is */
-		if (!compare_eth(orig_node->router->addr, ethhdr->h_source)) {
-			batman_packet->tq = orig_node->router->tq_avg;
+		if (!compare_eth(router->addr, ethhdr->h_source)) {
+			batman_packet->tq = router->tq_avg;
 
-			if (orig_node->router->last_ttl)
-				batman_packet->ttl = orig_node->router->last_ttl
-							- 1;
+			if (router->last_ttl)
+				batman_packet->ttl = router->last_ttl - 1;
 		}
 
-		tq_avg = orig_node->router->tq_avg;
+		tq_avg = router->tq_avg;
 	}
 
+	if (router)
+		neigh_node_free_ref(router);
+
 	/* apply hop penalty */
 	batman_packet->tq = hop_penalty(batman_packet->tq, bat_priv);
 
@@ -359,7 +369,7 @@ void schedule_forward_packet(struct orig_node *orig_node,
 	send_time = forward_send_time();
 	add_bat_packet_to_list(bat_priv,
 			       (unsigned char *)batman_packet,
-			       sizeof(struct batman_packet) + hna_buff_len,
+			       sizeof(struct batman_packet) + tt_buff_len,
 			       if_incoming, 0, send_time);
 }
 
@@ -367,6 +377,8 @@ static void forw_packet_free(struct forw_packet *forw_packet)
 {
 	if (forw_packet->skb)
 		kfree_skb(forw_packet->skb);
+	if (forw_packet->if_incoming)
+		hardif_free_ref(forw_packet->if_incoming);
 	kfree(forw_packet);
 }
 
@@ -388,7 +400,6 @@ static void _add_bcast_packet_to_list(struct bat_priv *bat_priv,
 			   send_time);
 }
 
-#define atomic_dec_not_zero(v)          atomic_add_unless((v), -1, 0)
 /* add a broadcast packet to the queue and setup timers. broadcast packets
  * are sent multiple times to increase probability for beeing received.
  *
@@ -399,6 +410,7 @@ static void _add_bcast_packet_to_list(struct bat_priv *bat_priv,
  * skb is freed. */
 int add_bcast_packet_to_list(struct bat_priv *bat_priv, struct sk_buff *skb)
 {
+	struct hard_iface *primary_if = NULL;
 	struct forw_packet *forw_packet;
 	struct bcast_packet *bcast_packet;
 
@@ -407,8 +419,9 @@ int add_bcast_packet_to_list(struct bat_priv *bat_priv, struct sk_buff *skb)
 		goto out;
 	}
 
-	if (!bat_priv->primary_if)
-		goto out;
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
+		goto out_and_inc;
 
 	forw_packet = kmalloc(sizeof(struct forw_packet), GFP_ATOMIC);
 
@@ -426,7 +439,7 @@ int add_bcast_packet_to_list(struct bat_priv *bat_priv, struct sk_buff *skb)
 	skb_reset_mac_header(skb);
 
 	forw_packet->skb = skb;
-	forw_packet->if_incoming = bat_priv->primary_if;
+	forw_packet->if_incoming = primary_if;
 
 	/* how often did we send the bcast packet ? */
 	forw_packet->num_packets = 0;
@@ -439,6 +452,8 @@ packet_free:
 out_and_inc:
 	atomic_inc(&bat_priv->bcast_queue_left);
 out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
 	return NETDEV_TX_BUSY;
 }
 
@@ -526,6 +541,7 @@ void purge_outstanding_packets(struct bat_priv *bat_priv,
 {
 	struct forw_packet *forw_packet;
 	struct hlist_node *tmp_node, *safe_tmp_node;
+	bool pending;
 
 	if (hard_iface)
 		bat_dbg(DBG_BATMAN, bat_priv,
@@ -554,8 +570,13 @@ void purge_outstanding_packets(struct bat_priv *bat_priv,
 		 * send_outstanding_bcast_packet() will lock the list to
 		 * delete the item from the list
 		 */
-		cancel_delayed_work_sync(&forw_packet->delayed_work);
+		pending = cancel_delayed_work_sync(&forw_packet->delayed_work);
 		spin_lock_bh(&bat_priv->forw_bcast_list_lock);
+
+		if (pending) {
+			hlist_del(&forw_packet->list);
+			forw_packet_free(forw_packet);
+		}
 	}
 	spin_unlock_bh(&bat_priv->forw_bcast_list_lock);
 
@@ -578,8 +599,13 @@ void purge_outstanding_packets(struct bat_priv *bat_priv,
 		 * send_outstanding_bat_packet() will lock the list to
 		 * delete the item from the list
 		 */
-		cancel_delayed_work_sync(&forw_packet->delayed_work);
+		pending = cancel_delayed_work_sync(&forw_packet->delayed_work);
 		spin_lock_bh(&bat_priv->forw_bat_list_lock);
+
+		if (pending) {
+			hlist_del(&forw_packet->list);
+			forw_packet_free(forw_packet);
+		}
 	}
 	spin_unlock_bh(&bat_priv->forw_bat_list_lock);
 }
diff --git a/net/batman-adv/send.h b/net/batman-adv/send.h
index 7b2ff19c05e..247172d71e4 100644
--- a/net/batman-adv/send.h
+++ b/net/batman-adv/send.h
@@ -29,7 +29,7 @@ void schedule_own_packet(struct hard_iface *hard_iface);
 void schedule_forward_packet(struct orig_node *orig_node,
 			     struct ethhdr *ethhdr,
 			     struct batman_packet *batman_packet,
-			     uint8_t directlink, int hna_buff_len,
+			     uint8_t directlink, int tt_buff_len,
 			     struct hard_iface *if_outgoing);
 int add_bcast_packet_to_list(struct bat_priv *bat_priv, struct sk_buff *skb);
 void send_outstanding_bat_packet(struct work_struct *work);
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 9ed26140a26..d5aa60999e8 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -43,8 +43,6 @@ static void bat_get_drvinfo(struct net_device *dev,
 static u32 bat_get_msglevel(struct net_device *dev);
 static void bat_set_msglevel(struct net_device *dev, u32 value);
 static u32 bat_get_link(struct net_device *dev);
-static u32 bat_get_rx_csum(struct net_device *dev);
-static int bat_set_rx_csum(struct net_device *dev, u32 data);
 
 static const struct ethtool_ops bat_ethtool_ops = {
 	.get_settings = bat_get_settings,
@@ -52,8 +50,6 @@ static const struct ethtool_ops bat_ethtool_ops = {
 	.get_msglevel = bat_get_msglevel,
 	.set_msglevel = bat_set_msglevel,
 	.get_link = bat_get_link,
-	.get_rx_csum = bat_get_rx_csum,
-	.set_rx_csum = bat_set_rx_csum
 };
 
 int my_skb_head_push(struct sk_buff *skb, unsigned int len)
@@ -76,120 +72,371 @@ int my_skb_head_push(struct sk_buff *skb, unsigned int len)
 	return 0;
 }
 
-static void softif_neigh_free_rcu(struct rcu_head *rcu)
-{
-	struct softif_neigh *softif_neigh;
-
-	softif_neigh = container_of(rcu, struct softif_neigh, rcu);
-	kfree(softif_neigh);
-}
-
 static void softif_neigh_free_ref(struct softif_neigh *softif_neigh)
 {
 	if (atomic_dec_and_test(&softif_neigh->refcount))
-		call_rcu(&softif_neigh->rcu, softif_neigh_free_rcu);
+		kfree_rcu(softif_neigh, rcu);
 }
 
-void softif_neigh_purge(struct bat_priv *bat_priv)
+static void softif_neigh_vid_free_rcu(struct rcu_head *rcu)
 {
-	struct softif_neigh *softif_neigh, *softif_neigh_tmp;
+	struct softif_neigh_vid *softif_neigh_vid;
+	struct softif_neigh *softif_neigh;
 	struct hlist_node *node, *node_tmp;
+	struct bat_priv *bat_priv;
 
-	spin_lock_bh(&bat_priv->softif_neigh_lock);
+	softif_neigh_vid = container_of(rcu, struct softif_neigh_vid, rcu);
+	bat_priv = softif_neigh_vid->bat_priv;
 
+	spin_lock_bh(&bat_priv->softif_neigh_lock);
 	hlist_for_each_entry_safe(softif_neigh, node, node_tmp,
-				  &bat_priv->softif_neigh_list, list) {
+				  &softif_neigh_vid->softif_neigh_list, list) {
+		hlist_del_rcu(&softif_neigh->list);
+		softif_neigh_free_ref(softif_neigh);
+	}
+	spin_unlock_bh(&bat_priv->softif_neigh_lock);
 
-		if ((!time_after(jiffies, softif_neigh->last_seen +
-				msecs_to_jiffies(SOFTIF_NEIGH_TIMEOUT))) &&
-		    (atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE))
-			continue;
+	kfree(softif_neigh_vid);
+}
 
-		hlist_del_rcu(&softif_neigh->list);
+static void softif_neigh_vid_free_ref(struct softif_neigh_vid *softif_neigh_vid)
+{
+	if (atomic_dec_and_test(&softif_neigh_vid->refcount))
+		call_rcu(&softif_neigh_vid->rcu, softif_neigh_vid_free_rcu);
+}
 
-		if (bat_priv->softif_neigh == softif_neigh) {
-			bat_dbg(DBG_ROUTES, bat_priv,
-				 "Current mesh exit point '%pM' vanished "
-				 "(vid: %d).\n",
-				 softif_neigh->addr, softif_neigh->vid);
-			softif_neigh_tmp = bat_priv->softif_neigh;
-			bat_priv->softif_neigh = NULL;
-			softif_neigh_free_ref(softif_neigh_tmp);
-		}
+static struct softif_neigh_vid *softif_neigh_vid_get(struct bat_priv *bat_priv,
+						     short vid)
+{
+	struct softif_neigh_vid *softif_neigh_vid;
+	struct hlist_node *node;
 
-		softif_neigh_free_ref(softif_neigh);
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(softif_neigh_vid, node,
+				 &bat_priv->softif_neigh_vids, list) {
+		if (softif_neigh_vid->vid != vid)
+			continue;
+
+		if (!atomic_inc_not_zero(&softif_neigh_vid->refcount))
+			continue;
+
+		goto out;
 	}
 
-	spin_unlock_bh(&bat_priv->softif_neigh_lock);
+	softif_neigh_vid = kzalloc(sizeof(struct softif_neigh_vid),
+				   GFP_ATOMIC);
+	if (!softif_neigh_vid)
+		goto out;
+
+	softif_neigh_vid->vid = vid;
+	softif_neigh_vid->bat_priv = bat_priv;
+
+	/* initialize with 2 - caller decrements counter by one */
+	atomic_set(&softif_neigh_vid->refcount, 2);
+	INIT_HLIST_HEAD(&softif_neigh_vid->softif_neigh_list);
+	INIT_HLIST_NODE(&softif_neigh_vid->list);
+	spin_lock_bh(&bat_priv->softif_neigh_vid_lock);
+	hlist_add_head_rcu(&softif_neigh_vid->list,
+			   &bat_priv->softif_neigh_vids);
+	spin_unlock_bh(&bat_priv->softif_neigh_vid_lock);
+
+out:
+	rcu_read_unlock();
+	return softif_neigh_vid;
 }
 
 static struct softif_neigh *softif_neigh_get(struct bat_priv *bat_priv,
 					     uint8_t *addr, short vid)
 {
-	struct softif_neigh *softif_neigh;
+	struct softif_neigh_vid *softif_neigh_vid;
+	struct softif_neigh *softif_neigh = NULL;
 	struct hlist_node *node;
 
+	softif_neigh_vid = softif_neigh_vid_get(bat_priv, vid);
+	if (!softif_neigh_vid)
+		goto out;
+
 	rcu_read_lock();
 	hlist_for_each_entry_rcu(softif_neigh, node,
-				 &bat_priv->softif_neigh_list, list) {
+				 &softif_neigh_vid->softif_neigh_list,
+				 list) {
 		if (!compare_eth(softif_neigh->addr, addr))
 			continue;
 
-		if (softif_neigh->vid != vid)
-			continue;
-
 		if (!atomic_inc_not_zero(&softif_neigh->refcount))
 			continue;
 
 		softif_neigh->last_seen = jiffies;
-		goto out;
+		goto unlock;
 	}
 
 	softif_neigh = kzalloc(sizeof(struct softif_neigh), GFP_ATOMIC);
 	if (!softif_neigh)
-		goto out;
+		goto unlock;
 
 	memcpy(softif_neigh->addr, addr, ETH_ALEN);
-	softif_neigh->vid = vid;
 	softif_neigh->last_seen = jiffies;
 	/* initialize with 2 - caller decrements counter by one */
 	atomic_set(&softif_neigh->refcount, 2);
 
 	INIT_HLIST_NODE(&softif_neigh->list);
 	spin_lock_bh(&bat_priv->softif_neigh_lock);
-	hlist_add_head_rcu(&softif_neigh->list, &bat_priv->softif_neigh_list);
+	hlist_add_head_rcu(&softif_neigh->list,
+			   &softif_neigh_vid->softif_neigh_list);
 	spin_unlock_bh(&bat_priv->softif_neigh_lock);
 
+unlock:
+	rcu_read_unlock();
 out:
+	if (softif_neigh_vid)
+		softif_neigh_vid_free_ref(softif_neigh_vid);
+	return softif_neigh;
+}
+
+static struct softif_neigh *softif_neigh_get_selected(
+				struct softif_neigh_vid *softif_neigh_vid)
+{
+	struct softif_neigh *softif_neigh;
+
+	rcu_read_lock();
+	softif_neigh = rcu_dereference(softif_neigh_vid->softif_neigh);
+
+	if (softif_neigh && !atomic_inc_not_zero(&softif_neigh->refcount))
+		softif_neigh = NULL;
+
 	rcu_read_unlock();
 	return softif_neigh;
 }
 
+static struct softif_neigh *softif_neigh_vid_get_selected(
+						struct bat_priv *bat_priv,
+						short vid)
+{
+	struct softif_neigh_vid *softif_neigh_vid;
+	struct softif_neigh *softif_neigh = NULL;
+
+	softif_neigh_vid = softif_neigh_vid_get(bat_priv, vid);
+	if (!softif_neigh_vid)
+		goto out;
+
+	softif_neigh = softif_neigh_get_selected(softif_neigh_vid);
+out:
+	if (softif_neigh_vid)
+		softif_neigh_vid_free_ref(softif_neigh_vid);
+	return softif_neigh;
+}
+
+static void softif_neigh_vid_select(struct bat_priv *bat_priv,
+				    struct softif_neigh *new_neigh,
+				    short vid)
+{
+	struct softif_neigh_vid *softif_neigh_vid;
+	struct softif_neigh *curr_neigh;
+
+	softif_neigh_vid = softif_neigh_vid_get(bat_priv, vid);
+	if (!softif_neigh_vid)
+		goto out;
+
+	spin_lock_bh(&bat_priv->softif_neigh_lock);
+
+	if (new_neigh && !atomic_inc_not_zero(&new_neigh->refcount))
+		new_neigh = NULL;
+
+	curr_neigh = softif_neigh_vid->softif_neigh;
+	rcu_assign_pointer(softif_neigh_vid->softif_neigh, new_neigh);
+
+	if ((curr_neigh) && (!new_neigh))
+		bat_dbg(DBG_ROUTES, bat_priv,
+			"Removing mesh exit point on vid: %d (prev: %pM).\n",
+			vid, curr_neigh->addr);
+	else if ((curr_neigh) && (new_neigh))
+		bat_dbg(DBG_ROUTES, bat_priv,
+			"Changing mesh exit point on vid: %d from %pM "
+			"to %pM.\n", vid, curr_neigh->addr, new_neigh->addr);
+	else if ((!curr_neigh) && (new_neigh))
+		bat_dbg(DBG_ROUTES, bat_priv,
+			"Setting mesh exit point on vid: %d to %pM.\n",
+			vid, new_neigh->addr);
+
+	if (curr_neigh)
+		softif_neigh_free_ref(curr_neigh);
+
+	spin_unlock_bh(&bat_priv->softif_neigh_lock);
+
+out:
+	if (softif_neigh_vid)
+		softif_neigh_vid_free_ref(softif_neigh_vid);
+}
+
+static void softif_neigh_vid_deselect(struct bat_priv *bat_priv,
+				      struct softif_neigh_vid *softif_neigh_vid)
+{
+	struct softif_neigh *curr_neigh;
+	struct softif_neigh *softif_neigh = NULL, *softif_neigh_tmp;
+	struct hard_iface *primary_if = NULL;
+	struct hlist_node *node;
+
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
+		goto out;
+
+	/* find new softif_neigh immediately to avoid temporary loops */
+	rcu_read_lock();
+	curr_neigh = rcu_dereference(softif_neigh_vid->softif_neigh);
+
+	hlist_for_each_entry_rcu(softif_neigh_tmp, node,
+				 &softif_neigh_vid->softif_neigh_list,
+				 list) {
+		if (softif_neigh_tmp == curr_neigh)
+			continue;
+
+		/* we got a neighbor but its mac is 'bigger' than ours  */
+		if (memcmp(primary_if->net_dev->dev_addr,
+			   softif_neigh_tmp->addr, ETH_ALEN) < 0)
+			continue;
+
+		if (!atomic_inc_not_zero(&softif_neigh_tmp->refcount))
+			continue;
+
+		softif_neigh = softif_neigh_tmp;
+		goto unlock;
+	}
+
+unlock:
+	rcu_read_unlock();
+out:
+	softif_neigh_vid_select(bat_priv, softif_neigh, softif_neigh_vid->vid);
+
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	if (softif_neigh)
+		softif_neigh_free_ref(softif_neigh);
+}
+
 int softif_neigh_seq_print_text(struct seq_file *seq, void *offset)
 {
 	struct net_device *net_dev = (struct net_device *)seq->private;
 	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	struct softif_neigh_vid *softif_neigh_vid;
 	struct softif_neigh *softif_neigh;
-	struct hlist_node *node;
+	struct hard_iface *primary_if;
+	struct hlist_node *node, *node_tmp;
+	struct softif_neigh *curr_softif_neigh;
+	int ret = 0, last_seen_secs, last_seen_msecs;
+
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if) {
+		ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+				 "please specify interfaces to enable it\n",
+				 net_dev->name);
+		goto out;
+	}
 
-	if (!bat_priv->primary_if) {
-		return seq_printf(seq, "BATMAN mesh %s disabled - "
-			       "please specify interfaces to enable it\n",
-			       net_dev->name);
+	if (primary_if->if_status != IF_ACTIVE) {
+		ret = seq_printf(seq, "BATMAN mesh %s "
+				 "disabled - primary interface not active\n",
+				 net_dev->name);
+		goto out;
 	}
 
 	seq_printf(seq, "Softif neighbor list (%s)\n", net_dev->name);
 
 	rcu_read_lock();
-	hlist_for_each_entry_rcu(softif_neigh, node,
-				 &bat_priv->softif_neigh_list, list)
-		seq_printf(seq, "%s %pM (vid: %d)\n",
-				bat_priv->softif_neigh == softif_neigh
-				? "=>" : "  ", softif_neigh->addr,
-				softif_neigh->vid);
+	hlist_for_each_entry_rcu(softif_neigh_vid, node,
+				 &bat_priv->softif_neigh_vids, list) {
+		seq_printf(seq, "     %-15s %s on vid: %d\n",
+			   "Originator", "last-seen", softif_neigh_vid->vid);
+
+		curr_softif_neigh = softif_neigh_get_selected(softif_neigh_vid);
+
+		hlist_for_each_entry_rcu(softif_neigh, node_tmp,
+					 &softif_neigh_vid->softif_neigh_list,
+					 list) {
+			last_seen_secs = jiffies_to_msecs(jiffies -
+						softif_neigh->last_seen) / 1000;
+			last_seen_msecs = jiffies_to_msecs(jiffies -
+						softif_neigh->last_seen) % 1000;
+			seq_printf(seq, "%s %pM  %3i.%03is\n",
+				   curr_softif_neigh == softif_neigh
+				   ? "=>" : "  ", softif_neigh->addr,
+				   last_seen_secs, last_seen_msecs);
+		}
+
+		if (curr_softif_neigh)
+			softif_neigh_free_ref(curr_softif_neigh);
+
+		seq_printf(seq, "\n");
+	}
 	rcu_read_unlock();
 
-	return 0;
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	return ret;
+}
+
+void softif_neigh_purge(struct bat_priv *bat_priv)
+{
+	struct softif_neigh *softif_neigh, *curr_softif_neigh;
+	struct softif_neigh_vid *softif_neigh_vid;
+	struct hlist_node *node, *node_tmp, *node_tmp2;
+	char do_deselect;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(softif_neigh_vid, node,
+				 &bat_priv->softif_neigh_vids, list) {
+		if (!atomic_inc_not_zero(&softif_neigh_vid->refcount))
+			continue;
+
+		curr_softif_neigh = softif_neigh_get_selected(softif_neigh_vid);
+		do_deselect = 0;
+
+		spin_lock_bh(&bat_priv->softif_neigh_lock);
+		hlist_for_each_entry_safe(softif_neigh, node_tmp, node_tmp2,
+					  &softif_neigh_vid->softif_neigh_list,
+					  list) {
+			if ((!time_after(jiffies, softif_neigh->last_seen +
+				msecs_to_jiffies(SOFTIF_NEIGH_TIMEOUT))) &&
+			    (atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE))
+				continue;
+
+			if (curr_softif_neigh == softif_neigh) {
+				bat_dbg(DBG_ROUTES, bat_priv,
+					"Current mesh exit point on vid: %d "
+					"'%pM' vanished.\n",
+					softif_neigh_vid->vid,
+					softif_neigh->addr);
+				do_deselect = 1;
+			}
+
+			hlist_del_rcu(&softif_neigh->list);
+			softif_neigh_free_ref(softif_neigh);
+		}
+		spin_unlock_bh(&bat_priv->softif_neigh_lock);
+
+		/* soft_neigh_vid_deselect() needs to acquire the
+		 * softif_neigh_lock */
+		if (do_deselect)
+			softif_neigh_vid_deselect(bat_priv, softif_neigh_vid);
+
+		if (curr_softif_neigh)
+			softif_neigh_free_ref(curr_softif_neigh);
+
+		softif_neigh_vid_free_ref(softif_neigh_vid);
+	}
+	rcu_read_unlock();
+
+	spin_lock_bh(&bat_priv->softif_neigh_vid_lock);
+	hlist_for_each_entry_safe(softif_neigh_vid, node, node_tmp,
+				  &bat_priv->softif_neigh_vids, list) {
+		if (!hlist_empty(&softif_neigh_vid->softif_neigh_list))
+			continue;
+
+		hlist_del_rcu(&softif_neigh_vid->list);
+		softif_neigh_vid_free_ref(softif_neigh_vid);
+	}
+	spin_unlock_bh(&bat_priv->softif_neigh_vid_lock);
+
 }
 
 static void softif_batman_recv(struct sk_buff *skb, struct net_device *dev,
@@ -198,7 +445,9 @@ static void softif_batman_recv(struct sk_buff *skb, struct net_device *dev,
 	struct bat_priv *bat_priv = netdev_priv(dev);
 	struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
 	struct batman_packet *batman_packet;
-	struct softif_neigh *softif_neigh, *softif_neigh_tmp;
+	struct softif_neigh *softif_neigh = NULL;
+	struct hard_iface *primary_if = NULL;
+	struct softif_neigh *curr_softif_neigh = NULL;
 
 	if (ntohs(ethhdr->h_proto) == ETH_P_8021Q)
 		batman_packet = (struct batman_packet *)
@@ -207,63 +456,52 @@ static void softif_batman_recv(struct sk_buff *skb, struct net_device *dev,
 		batman_packet = (struct batman_packet *)(skb->data + ETH_HLEN);
 
 	if (batman_packet->version != COMPAT_VERSION)
-		goto err;
+		goto out;
 
 	if (batman_packet->packet_type != BAT_PACKET)
-		goto err;
+		goto out;
 
 	if (!(batman_packet->flags & PRIMARIES_FIRST_HOP))
-		goto err;
+		goto out;
 
 	if (is_my_mac(batman_packet->orig))
-		goto err;
+		goto out;
 
 	softif_neigh = softif_neigh_get(bat_priv, batman_packet->orig, vid);
-
 	if (!softif_neigh)
-		goto err;
+		goto out;
+
+	curr_softif_neigh = softif_neigh_vid_get_selected(bat_priv, vid);
+	if (curr_softif_neigh == softif_neigh)
+		goto out;
 
-	if (bat_priv->softif_neigh == softif_neigh)
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
 		goto out;
 
 	/* we got a neighbor but its mac is 'bigger' than ours  */
-	if (memcmp(bat_priv->primary_if->net_dev->dev_addr,
+	if (memcmp(primary_if->net_dev->dev_addr,
 		   softif_neigh->addr, ETH_ALEN) < 0)
 		goto out;
 
-	/* switch to new 'smallest neighbor' */
-	if ((bat_priv->softif_neigh) &&
-	    (memcmp(softif_neigh->addr, bat_priv->softif_neigh->addr,
-							ETH_ALEN) < 0)) {
-		bat_dbg(DBG_ROUTES, bat_priv,
-			"Changing mesh exit point from %pM (vid: %d) "
-			"to %pM (vid: %d).\n",
-			 bat_priv->softif_neigh->addr,
-			 bat_priv->softif_neigh->vid,
-			 softif_neigh->addr, softif_neigh->vid);
-		softif_neigh_tmp = bat_priv->softif_neigh;
-		bat_priv->softif_neigh = softif_neigh;
-		softif_neigh_free_ref(softif_neigh_tmp);
-		/* we need to hold the additional reference */
-		goto err;
-	}
-
 	/* close own batX device and use softif_neigh as exit node */
-	if ((!bat_priv->softif_neigh) &&
-	    (memcmp(softif_neigh->addr,
-		    bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN) < 0)) {
-		bat_dbg(DBG_ROUTES, bat_priv,
-			"Setting mesh exit point to %pM (vid: %d).\n",
-			softif_neigh->addr, softif_neigh->vid);
-		bat_priv->softif_neigh = softif_neigh;
-		/* we need to hold the additional reference */
-		goto err;
+	if (!curr_softif_neigh) {
+		softif_neigh_vid_select(bat_priv, softif_neigh, vid);
+		goto out;
 	}
 
+	/* switch to new 'smallest neighbor' */
+	if (memcmp(softif_neigh->addr, curr_softif_neigh->addr, ETH_ALEN) < 0)
+		softif_neigh_vid_select(bat_priv, softif_neigh, vid);
+
 out:
-	softif_neigh_free_ref(softif_neigh);
-err:
 	kfree_skb(skb);
+	if (softif_neigh)
+		softif_neigh_free_ref(softif_neigh);
+	if (curr_softif_neigh)
+		softif_neigh_free_ref(curr_softif_neigh);
+	if (primary_if)
+		hardif_free_ref(primary_if);
 	return;
 }
 
@@ -293,11 +531,11 @@ static int interface_set_mac_addr(struct net_device *dev, void *p)
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
-	/* only modify hna-table if it has been initialised before */
+	/* only modify transtable if it has been initialised before */
 	if (atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE) {
-		hna_local_remove(bat_priv, dev->dev_addr,
+		tt_local_remove(bat_priv, dev->dev_addr,
 				 "mac address changed");
-		hna_local_add(dev, addr->sa_data);
+		tt_local_add(dev, addr->sa_data);
 	}
 
 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
@@ -319,8 +557,10 @@ int interface_tx(struct sk_buff *skb, struct net_device *soft_iface)
 {
 	struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
 	struct bat_priv *bat_priv = netdev_priv(soft_iface);
+	struct hard_iface *primary_if = NULL;
 	struct bcast_packet *bcast_packet;
 	struct vlan_ethhdr *vhdr;
+	struct softif_neigh *curr_softif_neigh = NULL;
 	int data_len = skb->len, ret;
 	short vid = -1;
 	bool do_bcast = false;
@@ -348,11 +588,12 @@ int interface_tx(struct sk_buff *skb, struct net_device *soft_iface)
 	 * if we have a another chosen mesh exit node in range
 	 * it will transport the packets to the mesh
 	 */
-	if ((bat_priv->softif_neigh) && (bat_priv->softif_neigh->vid == vid))
+	curr_softif_neigh = softif_neigh_vid_get_selected(bat_priv, vid);
+	if (curr_softif_neigh)
 		goto dropped;
 
 	/* TODO: check this for locks */
-	hna_local_add(soft_iface, ethhdr->h_source);
+	tt_local_add(soft_iface, ethhdr->h_source);
 
 	if (is_multicast_ether_addr(ethhdr->h_dest)) {
 		ret = gw_is_target(bat_priv, skb);
@@ -366,7 +607,8 @@ int interface_tx(struct sk_buff *skb, struct net_device *soft_iface)
 
 	/* ethernet packet should be broadcasted */
 	if (do_bcast) {
-		if (!bat_priv->primary_if)
+		primary_if = primary_if_get_selected(bat_priv);
+		if (!primary_if)
 			goto dropped;
 
 		if (my_skb_head_push(skb, sizeof(struct bcast_packet)) < 0)
@@ -382,7 +624,7 @@ int interface_tx(struct sk_buff *skb, struct net_device *soft_iface)
 		/* hw address of first interface is the orig mac because only
 		 * this mac is known throughout the mesh */
 		memcpy(bcast_packet->orig,
-		       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+		       primary_if->net_dev->dev_addr, ETH_ALEN);
 
 		/* set broadcast sequence number */
 		bcast_packet->seqno =
@@ -410,6 +652,10 @@ dropped:
 dropped_freed:
 	bat_priv->stats.tx_dropped++;
 end:
+	if (curr_softif_neigh)
+		softif_neigh_free_ref(curr_softif_neigh);
+	if (primary_if)
+		hardif_free_ref(primary_if);
 	return NETDEV_TX_OK;
 }
 
@@ -421,6 +667,7 @@ void interface_rx(struct net_device *soft_iface,
 	struct unicast_packet *unicast_packet;
 	struct ethhdr *ethhdr;
 	struct vlan_ethhdr *vhdr;
+	struct softif_neigh *curr_softif_neigh = NULL;
 	short vid = -1;
 	int ret;
 
@@ -450,7 +697,8 @@ void interface_rx(struct net_device *soft_iface,
 	 * if we have a another chosen mesh exit node in range
 	 * it will transport the packets to the non-mesh network
 	 */
-	if ((bat_priv->softif_neigh) && (bat_priv->softif_neigh->vid == vid)) {
+	curr_softif_neigh = softif_neigh_vid_get_selected(bat_priv, vid);
+	if (curr_softif_neigh) {
 		skb_push(skb, hdr_size);
 		unicast_packet = (struct unicast_packet *)skb->data;
 
@@ -461,7 +709,7 @@ void interface_rx(struct net_device *soft_iface,
 		skb_reset_mac_header(skb);
 
 		memcpy(unicast_packet->dest,
-		       bat_priv->softif_neigh->addr, ETH_ALEN);
+		       curr_softif_neigh->addr, ETH_ALEN);
 		ret = route_unicast_packet(skb, recv_if);
 		if (ret == NET_RX_DROP)
 			goto dropped;
@@ -474,7 +722,7 @@ void interface_rx(struct net_device *soft_iface,
 		goto dropped;
 	skb->protocol = eth_type_trans(skb, soft_iface);
 
-	/* should not be neccesary anymore as we use skb_pull_rcsum()
+	/* should not be necessary anymore as we use skb_pull_rcsum()
 	 * TODO: please verify this and remove this TODO
 	 * -- Dec 21st 2009, Simon Wunderlich */
 
@@ -486,11 +734,13 @@ void interface_rx(struct net_device *soft_iface,
 	soft_iface->last_rx = jiffies;
 
 	netif_rx(skb);
-	return;
+	goto out;
 
 dropped:
 	kfree_skb(skb);
 out:
+	if (curr_softif_neigh)
+		softif_neigh_free_ref(curr_softif_neigh);
 	return;
 }
 
@@ -524,14 +774,15 @@ static void interface_setup(struct net_device *dev)
 	dev->hard_start_xmit = interface_tx;
 #endif
 	dev->destructor = free_netdev;
+	dev->tx_queue_len = 0;
 
 	/**
 	 * can't call min_mtu, because the needed variables
 	 * have not been initialized yet
 	 */
 	dev->mtu = ETH_DATA_LEN;
-	dev->hard_header_len = BAT_HEADER_LEN; /* reserve more space in the
-						* skbuff for our header */
+	/* reserve more space in the skbuff for our header */
+	dev->hard_header_len = BAT_HEADER_LEN;
 
 	/* generate random address */
 	random_ether_addr(dev_addr);
@@ -556,7 +807,7 @@ struct net_device *softif_create(char *name)
 		goto out;
 	}
 
-	ret = register_netdev(soft_iface);
+	ret = register_netdevice(soft_iface);
 	if (ret < 0) {
 		pr_err("Unable to register the batman interface '%s': %i\n",
 		       name, ret);
@@ -580,11 +831,10 @@ struct net_device *softif_create(char *name)
 
 	atomic_set(&bat_priv->mesh_state, MESH_INACTIVE);
 	atomic_set(&bat_priv->bcast_seqno, 1);
-	atomic_set(&bat_priv->hna_local_changed, 0);
+	atomic_set(&bat_priv->tt_local_changed, 0);
 
 	bat_priv->primary_if = NULL;
 	bat_priv->num_ifaces = 0;
-	bat_priv->softif_neigh = NULL;
 
 	ret = sysfs_add_meshif(soft_iface);
 	if (ret < 0)
@@ -640,7 +890,7 @@ static int bat_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	cmd->supported = 0;
 	cmd->advertising = 0;
-	cmd->speed = SPEED_10;
+	ethtool_cmd_speed_set(cmd, SPEED_10);
 	cmd->duplex = DUPLEX_FULL;
 	cmd->port = PORT_TP;
 	cmd->phy_address = 0;
@@ -675,12 +925,3 @@ static u32 bat_get_link(struct net_device *dev)
 	return 1;
 }
 
-static u32 bat_get_rx_csum(struct net_device *dev)
-{
-	return 0;
-}
-
-static int bat_set_rx_csum(struct net_device *dev, u32 data)
-{
-	return -EOPNOTSUPP;
-}
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 8d15b48d169..7b729660cbf 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -22,43 +22,44 @@
 #include "main.h"
 #include "translation-table.h"
 #include "soft-interface.h"
+#include "hard-interface.h"
 #include "hash.h"
 #include "originator.h"
 
-static void hna_local_purge(struct work_struct *work);
-static void _hna_global_del_orig(struct bat_priv *bat_priv,
-				 struct hna_global_entry *hna_global_entry,
+static void tt_local_purge(struct work_struct *work);
+static void _tt_global_del_orig(struct bat_priv *bat_priv,
+				 struct tt_global_entry *tt_global_entry,
 				 char *message);
 
 /* returns 1 if they are the same mac addr */
-static int compare_lhna(struct hlist_node *node, void *data2)
+static int compare_ltt(struct hlist_node *node, void *data2)
 {
-	void *data1 = container_of(node, struct hna_local_entry, hash_entry);
+	void *data1 = container_of(node, struct tt_local_entry, hash_entry);
 
 	return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0);
 }
 
 /* returns 1 if they are the same mac addr */
-static int compare_ghna(struct hlist_node *node, void *data2)
+static int compare_gtt(struct hlist_node *node, void *data2)
 {
-	void *data1 = container_of(node, struct hna_global_entry, hash_entry);
+	void *data1 = container_of(node, struct tt_global_entry, hash_entry);
 
 	return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0);
 }
 
-static void hna_local_start_timer(struct bat_priv *bat_priv)
+static void tt_local_start_timer(struct bat_priv *bat_priv)
 {
-	INIT_DELAYED_WORK(&bat_priv->hna_work, hna_local_purge);
-	queue_delayed_work(bat_event_workqueue, &bat_priv->hna_work, 10 * HZ);
+	INIT_DELAYED_WORK(&bat_priv->tt_work, tt_local_purge);
+	queue_delayed_work(bat_event_workqueue, &bat_priv->tt_work, 10 * HZ);
 }
 
-static struct hna_local_entry *hna_local_hash_find(struct bat_priv *bat_priv,
+static struct tt_local_entry *tt_local_hash_find(struct bat_priv *bat_priv,
 						   void *data)
 {
-	struct hashtable_t *hash = bat_priv->hna_local_hash;
+	struct hashtable_t *hash = bat_priv->tt_local_hash;
 	struct hlist_head *head;
 	struct hlist_node *node;
-	struct hna_local_entry *hna_local_entry, *hna_local_entry_tmp = NULL;
+	struct tt_local_entry *tt_local_entry, *tt_local_entry_tmp = NULL;
 	int index;
 
 	if (!hash)
@@ -68,26 +69,26 @@ static struct hna_local_entry *hna_local_hash_find(struct bat_priv *bat_priv,
 	head = &hash->table[index];
 
 	rcu_read_lock();
-	hlist_for_each_entry_rcu(hna_local_entry, node, head, hash_entry) {
-		if (!compare_eth(hna_local_entry, data))
+	hlist_for_each_entry_rcu(tt_local_entry, node, head, hash_entry) {
+		if (!compare_eth(tt_local_entry, data))
 			continue;
 
-		hna_local_entry_tmp = hna_local_entry;
+		tt_local_entry_tmp = tt_local_entry;
 		break;
 	}
 	rcu_read_unlock();
 
-	return hna_local_entry_tmp;
+	return tt_local_entry_tmp;
 }
 
-static struct hna_global_entry *hna_global_hash_find(struct bat_priv *bat_priv,
+static struct tt_global_entry *tt_global_hash_find(struct bat_priv *bat_priv,
 						     void *data)
 {
-	struct hashtable_t *hash = bat_priv->hna_global_hash;
+	struct hashtable_t *hash = bat_priv->tt_global_hash;
 	struct hlist_head *head;
 	struct hlist_node *node;
-	struct hna_global_entry *hna_global_entry;
-	struct hna_global_entry *hna_global_entry_tmp = NULL;
+	struct tt_global_entry *tt_global_entry;
+	struct tt_global_entry *tt_global_entry_tmp = NULL;
 	int index;
 
 	if (!hash)
@@ -97,125 +98,125 @@ static struct hna_global_entry *hna_global_hash_find(struct bat_priv *bat_priv,
 	head = &hash->table[index];
 
 	rcu_read_lock();
-	hlist_for_each_entry_rcu(hna_global_entry, node, head, hash_entry) {
-		if (!compare_eth(hna_global_entry, data))
+	hlist_for_each_entry_rcu(tt_global_entry, node, head, hash_entry) {
+		if (!compare_eth(tt_global_entry, data))
 			continue;
 
-		hna_global_entry_tmp = hna_global_entry;
+		tt_global_entry_tmp = tt_global_entry;
 		break;
 	}
 	rcu_read_unlock();
 
-	return hna_global_entry_tmp;
+	return tt_global_entry_tmp;
 }
 
-int hna_local_init(struct bat_priv *bat_priv)
+int tt_local_init(struct bat_priv *bat_priv)
 {
-	if (bat_priv->hna_local_hash)
+	if (bat_priv->tt_local_hash)
 		return 1;
 
-	bat_priv->hna_local_hash = hash_new(1024);
+	bat_priv->tt_local_hash = hash_new(1024);
 
-	if (!bat_priv->hna_local_hash)
+	if (!bat_priv->tt_local_hash)
 		return 0;
 
-	atomic_set(&bat_priv->hna_local_changed, 0);
-	hna_local_start_timer(bat_priv);
+	atomic_set(&bat_priv->tt_local_changed, 0);
+	tt_local_start_timer(bat_priv);
 
 	return 1;
 }
 
-void hna_local_add(struct net_device *soft_iface, uint8_t *addr)
+void tt_local_add(struct net_device *soft_iface, uint8_t *addr)
 {
 	struct bat_priv *bat_priv = netdev_priv(soft_iface);
-	struct hna_local_entry *hna_local_entry;
-	struct hna_global_entry *hna_global_entry;
+	struct tt_local_entry *tt_local_entry;
+	struct tt_global_entry *tt_global_entry;
 	int required_bytes;
 
-	spin_lock_bh(&bat_priv->hna_lhash_lock);
-	hna_local_entry = hna_local_hash_find(bat_priv, addr);
-	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	spin_lock_bh(&bat_priv->tt_lhash_lock);
+	tt_local_entry = tt_local_hash_find(bat_priv, addr);
+	spin_unlock_bh(&bat_priv->tt_lhash_lock);
 
-	if (hna_local_entry) {
-		hna_local_entry->last_seen = jiffies;
+	if (tt_local_entry) {
+		tt_local_entry->last_seen = jiffies;
 		return;
 	}
 
 	/* only announce as many hosts as possible in the batman-packet and
-	   space in batman_packet->num_hna That also should give a limit to
+	   space in batman_packet->num_tt That also should give a limit to
 	   MAC-flooding. */
-	required_bytes = (bat_priv->num_local_hna + 1) * ETH_ALEN;
+	required_bytes = (bat_priv->num_local_tt + 1) * ETH_ALEN;
 	required_bytes += BAT_PACKET_LEN;
 
 	if ((required_bytes > ETH_DATA_LEN) ||
 	    (atomic_read(&bat_priv->aggregated_ogms) &&
 	     required_bytes > MAX_AGGREGATION_BYTES) ||
-	    (bat_priv->num_local_hna + 1 > 255)) {
+	    (bat_priv->num_local_tt + 1 > 255)) {
 		bat_dbg(DBG_ROUTES, bat_priv,
-			"Can't add new local hna entry (%pM): "
-			"number of local hna entries exceeds packet size\n",
+			"Can't add new local tt entry (%pM): "
+			"number of local tt entries exceeds packet size\n",
 			addr);
 		return;
 	}
 
 	bat_dbg(DBG_ROUTES, bat_priv,
-		"Creating new local hna entry: %pM\n", addr);
+		"Creating new local tt entry: %pM\n", addr);
 
-	hna_local_entry = kmalloc(sizeof(struct hna_local_entry), GFP_ATOMIC);
-	if (!hna_local_entry)
+	tt_local_entry = kmalloc(sizeof(struct tt_local_entry), GFP_ATOMIC);
+	if (!tt_local_entry)
 		return;
 
-	memcpy(hna_local_entry->addr, addr, ETH_ALEN);
-	hna_local_entry->last_seen = jiffies;
+	memcpy(tt_local_entry->addr, addr, ETH_ALEN);
+	tt_local_entry->last_seen = jiffies;
 
 	/* the batman interface mac address should never be purged */
 	if (compare_eth(addr, soft_iface->dev_addr))
-		hna_local_entry->never_purge = 1;
+		tt_local_entry->never_purge = 1;
 	else
-		hna_local_entry->never_purge = 0;
+		tt_local_entry->never_purge = 0;
 
-	spin_lock_bh(&bat_priv->hna_lhash_lock);
+	spin_lock_bh(&bat_priv->tt_lhash_lock);
 
-	hash_add(bat_priv->hna_local_hash, compare_lhna, choose_orig,
-		 hna_local_entry, &hna_local_entry->hash_entry);
-	bat_priv->num_local_hna++;
-	atomic_set(&bat_priv->hna_local_changed, 1);
+	hash_add(bat_priv->tt_local_hash, compare_ltt, choose_orig,
+		 tt_local_entry, &tt_local_entry->hash_entry);
+	bat_priv->num_local_tt++;
+	atomic_set(&bat_priv->tt_local_changed, 1);
 
-	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	spin_unlock_bh(&bat_priv->tt_lhash_lock);
 
 	/* remove address from global hash if present */
-	spin_lock_bh(&bat_priv->hna_ghash_lock);
+	spin_lock_bh(&bat_priv->tt_ghash_lock);
 
-	hna_global_entry = hna_global_hash_find(bat_priv, addr);
+	tt_global_entry = tt_global_hash_find(bat_priv, addr);
 
-	if (hna_global_entry)
-		_hna_global_del_orig(bat_priv, hna_global_entry,
-				     "local hna received");
+	if (tt_global_entry)
+		_tt_global_del_orig(bat_priv, tt_global_entry,
+				     "local tt received");
 
-	spin_unlock_bh(&bat_priv->hna_ghash_lock);
+	spin_unlock_bh(&bat_priv->tt_ghash_lock);
 }
 
-int hna_local_fill_buffer(struct bat_priv *bat_priv,
+int tt_local_fill_buffer(struct bat_priv *bat_priv,
 			  unsigned char *buff, int buff_len)
 {
-	struct hashtable_t *hash = bat_priv->hna_local_hash;
-	struct hna_local_entry *hna_local_entry;
+	struct hashtable_t *hash = bat_priv->tt_local_hash;
+	struct tt_local_entry *tt_local_entry;
 	struct hlist_node *node;
 	struct hlist_head *head;
 	int i, count = 0;
 
-	spin_lock_bh(&bat_priv->hna_lhash_lock);
+	spin_lock_bh(&bat_priv->tt_lhash_lock);
 
 	for (i = 0; i < hash->size; i++) {
 		head = &hash->table[i];
 
 		rcu_read_lock();
-		hlist_for_each_entry_rcu(hna_local_entry, node,
+		hlist_for_each_entry_rcu(tt_local_entry, node,
 					 head, hash_entry) {
 			if (buff_len < (count + 1) * ETH_ALEN)
 				break;
 
-			memcpy(buff + (count * ETH_ALEN), hna_local_entry->addr,
+			memcpy(buff + (count * ETH_ALEN), tt_local_entry->addr,
 			       ETH_ALEN);
 
 			count++;
@@ -223,37 +224,47 @@ int hna_local_fill_buffer(struct bat_priv *bat_priv,
 		rcu_read_unlock();
 	}
 
-	/* if we did not get all new local hnas see you next time  ;-) */
-	if (count == bat_priv->num_local_hna)
-		atomic_set(&bat_priv->hna_local_changed, 0);
+	/* if we did not get all new local tts see you next time  ;-) */
+	if (count == bat_priv->num_local_tt)
+		atomic_set(&bat_priv->tt_local_changed, 0);
 
-	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	spin_unlock_bh(&bat_priv->tt_lhash_lock);
 	return count;
 }
 
-int hna_local_seq_print_text(struct seq_file *seq, void *offset)
+int tt_local_seq_print_text(struct seq_file *seq, void *offset)
 {
 	struct net_device *net_dev = (struct net_device *)seq->private;
 	struct bat_priv *bat_priv = netdev_priv(net_dev);
-	struct hashtable_t *hash = bat_priv->hna_local_hash;
-	struct hna_local_entry *hna_local_entry;
+	struct hashtable_t *hash = bat_priv->tt_local_hash;
+	struct tt_local_entry *tt_local_entry;
+	struct hard_iface *primary_if;
 	struct hlist_node *node;
 	struct hlist_head *head;
 	size_t buf_size, pos;
 	char *buff;
-	int i;
+	int i, ret = 0;
 
-	if (!bat_priv->primary_if) {
-		return seq_printf(seq, "BATMAN mesh %s disabled - "
-			       "please specify interfaces to enable it\n",
-			       net_dev->name);
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if) {
+		ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+				 "please specify interfaces to enable it\n",
+				 net_dev->name);
+		goto out;
+	}
+
+	if (primary_if->if_status != IF_ACTIVE) {
+		ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+				 "primary interface not active\n",
+				 net_dev->name);
+		goto out;
 	}
 
 	seq_printf(seq, "Locally retrieved addresses (from %s) "
-		   "announced via HNA:\n",
+		   "announced via TT:\n",
 		   net_dev->name);
 
-	spin_lock_bh(&bat_priv->hna_lhash_lock);
+	spin_lock_bh(&bat_priv->tt_lhash_lock);
 
 	buf_size = 1;
 	/* Estimate length for: " * xx:xx:xx:xx:xx:xx\n" */
@@ -268,8 +279,9 @@ int hna_local_seq_print_text(struct seq_file *seq, void *offset)
 
 	buff = kmalloc(buf_size, GFP_ATOMIC);
 	if (!buff) {
-		spin_unlock_bh(&bat_priv->hna_lhash_lock);
-		return -ENOMEM;
+		spin_unlock_bh(&bat_priv->tt_lhash_lock);
+		ret = -ENOMEM;
+		goto out;
 	}
 
 	buff[0] = '\0';
@@ -279,211 +291,225 @@ int hna_local_seq_print_text(struct seq_file *seq, void *offset)
 		head = &hash->table[i];
 
 		rcu_read_lock();
-		hlist_for_each_entry_rcu(hna_local_entry, node,
+		hlist_for_each_entry_rcu(tt_local_entry, node,
 					 head, hash_entry) {
 			pos += snprintf(buff + pos, 22, " * %pM\n",
-					hna_local_entry->addr);
+					tt_local_entry->addr);
 		}
 		rcu_read_unlock();
 	}
 
-	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	spin_unlock_bh(&bat_priv->tt_lhash_lock);
 
 	seq_printf(seq, "%s", buff);
 	kfree(buff);
-	return 0;
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	return ret;
 }
 
-static void _hna_local_del(struct hlist_node *node, void *arg)
+static void _tt_local_del(struct hlist_node *node, void *arg)
 {
 	struct bat_priv *bat_priv = (struct bat_priv *)arg;
-	void *data = container_of(node, struct hna_local_entry, hash_entry);
+	void *data = container_of(node, struct tt_local_entry, hash_entry);
 
 	kfree(data);
-	bat_priv->num_local_hna--;
-	atomic_set(&bat_priv->hna_local_changed, 1);
+	bat_priv->num_local_tt--;
+	atomic_set(&bat_priv->tt_local_changed, 1);
 }
 
-static void hna_local_del(struct bat_priv *bat_priv,
-			  struct hna_local_entry *hna_local_entry,
+static void tt_local_del(struct bat_priv *bat_priv,
+			  struct tt_local_entry *tt_local_entry,
 			  char *message)
 {
-	bat_dbg(DBG_ROUTES, bat_priv, "Deleting local hna entry (%pM): %s\n",
-		hna_local_entry->addr, message);
+	bat_dbg(DBG_ROUTES, bat_priv, "Deleting local tt entry (%pM): %s\n",
+		tt_local_entry->addr, message);
 
-	hash_remove(bat_priv->hna_local_hash, compare_lhna, choose_orig,
-		    hna_local_entry->addr);
-	_hna_local_del(&hna_local_entry->hash_entry, bat_priv);
+	hash_remove(bat_priv->tt_local_hash, compare_ltt, choose_orig,
+		    tt_local_entry->addr);
+	_tt_local_del(&tt_local_entry->hash_entry, bat_priv);
 }
 
-void hna_local_remove(struct bat_priv *bat_priv,
+void tt_local_remove(struct bat_priv *bat_priv,
 		      uint8_t *addr, char *message)
 {
-	struct hna_local_entry *hna_local_entry;
+	struct tt_local_entry *tt_local_entry;
 
-	spin_lock_bh(&bat_priv->hna_lhash_lock);
+	spin_lock_bh(&bat_priv->tt_lhash_lock);
 
-	hna_local_entry = hna_local_hash_find(bat_priv, addr);
+	tt_local_entry = tt_local_hash_find(bat_priv, addr);
 
-	if (hna_local_entry)
-		hna_local_del(bat_priv, hna_local_entry, message);
+	if (tt_local_entry)
+		tt_local_del(bat_priv, tt_local_entry, message);
 
-	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	spin_unlock_bh(&bat_priv->tt_lhash_lock);
 }
 
-static void hna_local_purge(struct work_struct *work)
+static void tt_local_purge(struct work_struct *work)
 {
 	struct delayed_work *delayed_work =
 		container_of(work, struct delayed_work, work);
 	struct bat_priv *bat_priv =
-		container_of(delayed_work, struct bat_priv, hna_work);
-	struct hashtable_t *hash = bat_priv->hna_local_hash;
-	struct hna_local_entry *hna_local_entry;
+		container_of(delayed_work, struct bat_priv, tt_work);
+	struct hashtable_t *hash = bat_priv->tt_local_hash;
+	struct tt_local_entry *tt_local_entry;
 	struct hlist_node *node, *node_tmp;
 	struct hlist_head *head;
 	unsigned long timeout;
 	int i;
 
-	spin_lock_bh(&bat_priv->hna_lhash_lock);
+	spin_lock_bh(&bat_priv->tt_lhash_lock);
 
 	for (i = 0; i < hash->size; i++) {
 		head = &hash->table[i];
 
-		hlist_for_each_entry_safe(hna_local_entry, node, node_tmp,
+		hlist_for_each_entry_safe(tt_local_entry, node, node_tmp,
 					  head, hash_entry) {
-			if (hna_local_entry->never_purge)
+			if (tt_local_entry->never_purge)
 				continue;
 
-			timeout = hna_local_entry->last_seen;
-			timeout += LOCAL_HNA_TIMEOUT * HZ;
+			timeout = tt_local_entry->last_seen;
+			timeout += TT_LOCAL_TIMEOUT * HZ;
 
 			if (time_before(jiffies, timeout))
 				continue;
 
-			hna_local_del(bat_priv, hna_local_entry,
+			tt_local_del(bat_priv, tt_local_entry,
 				      "address timed out");
 		}
 	}
 
-	spin_unlock_bh(&bat_priv->hna_lhash_lock);
-	hna_local_start_timer(bat_priv);
+	spin_unlock_bh(&bat_priv->tt_lhash_lock);
+	tt_local_start_timer(bat_priv);
 }
 
-void hna_local_free(struct bat_priv *bat_priv)
+void tt_local_free(struct bat_priv *bat_priv)
 {
-	if (!bat_priv->hna_local_hash)
+	if (!bat_priv->tt_local_hash)
 		return;
 
-	cancel_delayed_work_sync(&bat_priv->hna_work);
-	hash_delete(bat_priv->hna_local_hash, _hna_local_del, bat_priv);
-	bat_priv->hna_local_hash = NULL;
+	cancel_delayed_work_sync(&bat_priv->tt_work);
+	hash_delete(bat_priv->tt_local_hash, _tt_local_del, bat_priv);
+	bat_priv->tt_local_hash = NULL;
 }
 
-int hna_global_init(struct bat_priv *bat_priv)
+int tt_global_init(struct bat_priv *bat_priv)
 {
-	if (bat_priv->hna_global_hash)
+	if (bat_priv->tt_global_hash)
 		return 1;
 
-	bat_priv->hna_global_hash = hash_new(1024);
+	bat_priv->tt_global_hash = hash_new(1024);
 
-	if (!bat_priv->hna_global_hash)
+	if (!bat_priv->tt_global_hash)
 		return 0;
 
 	return 1;
 }
 
-void hna_global_add_orig(struct bat_priv *bat_priv,
+void tt_global_add_orig(struct bat_priv *bat_priv,
 			 struct orig_node *orig_node,
-			 unsigned char *hna_buff, int hna_buff_len)
+			 unsigned char *tt_buff, int tt_buff_len)
 {
-	struct hna_global_entry *hna_global_entry;
-	struct hna_local_entry *hna_local_entry;
-	int hna_buff_count = 0;
-	unsigned char *hna_ptr;
+	struct tt_global_entry *tt_global_entry;
+	struct tt_local_entry *tt_local_entry;
+	int tt_buff_count = 0;
+	unsigned char *tt_ptr;
 
-	while ((hna_buff_count + 1) * ETH_ALEN <= hna_buff_len) {
-		spin_lock_bh(&bat_priv->hna_ghash_lock);
+	while ((tt_buff_count + 1) * ETH_ALEN <= tt_buff_len) {
+		spin_lock_bh(&bat_priv->tt_ghash_lock);
 
-		hna_ptr = hna_buff + (hna_buff_count * ETH_ALEN);
-		hna_global_entry = hna_global_hash_find(bat_priv, hna_ptr);
+		tt_ptr = tt_buff + (tt_buff_count * ETH_ALEN);
+		tt_global_entry = tt_global_hash_find(bat_priv, tt_ptr);
 
-		if (!hna_global_entry) {
-			spin_unlock_bh(&bat_priv->hna_ghash_lock);
+		if (!tt_global_entry) {
+			spin_unlock_bh(&bat_priv->tt_ghash_lock);
 
-			hna_global_entry =
-				kmalloc(sizeof(struct hna_global_entry),
+			tt_global_entry =
+				kmalloc(sizeof(struct tt_global_entry),
 					GFP_ATOMIC);
 
-			if (!hna_global_entry)
+			if (!tt_global_entry)
 				break;
 
-			memcpy(hna_global_entry->addr, hna_ptr, ETH_ALEN);
+			memcpy(tt_global_entry->addr, tt_ptr, ETH_ALEN);
 
 			bat_dbg(DBG_ROUTES, bat_priv,
-				"Creating new global hna entry: "
+				"Creating new global tt entry: "
 				"%pM (via %pM)\n",
-				hna_global_entry->addr, orig_node->orig);
+				tt_global_entry->addr, orig_node->orig);
 
-			spin_lock_bh(&bat_priv->hna_ghash_lock);
-			hash_add(bat_priv->hna_global_hash, compare_ghna,
-				 choose_orig, hna_global_entry,
-				 &hna_global_entry->hash_entry);
+			spin_lock_bh(&bat_priv->tt_ghash_lock);
+			hash_add(bat_priv->tt_global_hash, compare_gtt,
+				 choose_orig, tt_global_entry,
+				 &tt_global_entry->hash_entry);
 
 		}
 
-		hna_global_entry->orig_node = orig_node;
-		spin_unlock_bh(&bat_priv->hna_ghash_lock);
+		tt_global_entry->orig_node = orig_node;
+		spin_unlock_bh(&bat_priv->tt_ghash_lock);
 
 		/* remove address from local hash if present */
-		spin_lock_bh(&bat_priv->hna_lhash_lock);
+		spin_lock_bh(&bat_priv->tt_lhash_lock);
 
-		hna_ptr = hna_buff + (hna_buff_count * ETH_ALEN);
-		hna_local_entry = hna_local_hash_find(bat_priv, hna_ptr);
+		tt_ptr = tt_buff + (tt_buff_count * ETH_ALEN);
+		tt_local_entry = tt_local_hash_find(bat_priv, tt_ptr);
 
-		if (hna_local_entry)
-			hna_local_del(bat_priv, hna_local_entry,
-				      "global hna received");
+		if (tt_local_entry)
+			tt_local_del(bat_priv, tt_local_entry,
+				      "global tt received");
 
-		spin_unlock_bh(&bat_priv->hna_lhash_lock);
+		spin_unlock_bh(&bat_priv->tt_lhash_lock);
 
-		hna_buff_count++;
+		tt_buff_count++;
 	}
 
 	/* initialize, and overwrite if malloc succeeds */
-	orig_node->hna_buff = NULL;
-	orig_node->hna_buff_len = 0;
-
-	if (hna_buff_len > 0) {
-		orig_node->hna_buff = kmalloc(hna_buff_len, GFP_ATOMIC);
-		if (orig_node->hna_buff) {
-			memcpy(orig_node->hna_buff, hna_buff, hna_buff_len);
-			orig_node->hna_buff_len = hna_buff_len;
+	orig_node->tt_buff = NULL;
+	orig_node->tt_buff_len = 0;
+
+	if (tt_buff_len > 0) {
+		orig_node->tt_buff = kmalloc(tt_buff_len, GFP_ATOMIC);
+		if (orig_node->tt_buff) {
+			memcpy(orig_node->tt_buff, tt_buff, tt_buff_len);
+			orig_node->tt_buff_len = tt_buff_len;
 		}
 	}
 }
 
-int hna_global_seq_print_text(struct seq_file *seq, void *offset)
+int tt_global_seq_print_text(struct seq_file *seq, void *offset)
 {
 	struct net_device *net_dev = (struct net_device *)seq->private;
 	struct bat_priv *bat_priv = netdev_priv(net_dev);
-	struct hashtable_t *hash = bat_priv->hna_global_hash;
-	struct hna_global_entry *hna_global_entry;
+	struct hashtable_t *hash = bat_priv->tt_global_hash;
+	struct tt_global_entry *tt_global_entry;
+	struct hard_iface *primary_if;
 	struct hlist_node *node;
 	struct hlist_head *head;
 	size_t buf_size, pos;
 	char *buff;
-	int i;
+	int i, ret = 0;
 
-	if (!bat_priv->primary_if) {
-		return seq_printf(seq, "BATMAN mesh %s disabled - "
-				  "please specify interfaces to enable it\n",
-				  net_dev->name);
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if) {
+		ret = seq_printf(seq, "BATMAN mesh %s disabled - please "
+				 "specify interfaces to enable it\n",
+				 net_dev->name);
+		goto out;
 	}
 
-	seq_printf(seq, "Globally announced HNAs received via the mesh %s\n",
+	if (primary_if->if_status != IF_ACTIVE) {
+		ret = seq_printf(seq, "BATMAN mesh %s disabled - "
+				 "primary interface not active\n",
+				 net_dev->name);
+		goto out;
+	}
+
+	seq_printf(seq,
+		   "Globally announced TT entries received via the mesh %s\n",
 		   net_dev->name);
 
-	spin_lock_bh(&bat_priv->hna_ghash_lock);
+	spin_lock_bh(&bat_priv->tt_ghash_lock);
 
 	buf_size = 1;
 	/* Estimate length for: " * xx:xx:xx:xx:xx:xx via xx:xx:xx:xx:xx:xx\n"*/
@@ -498,8 +524,9 @@ int hna_global_seq_print_text(struct seq_file *seq, void *offset)
 
 	buff = kmalloc(buf_size, GFP_ATOMIC);
 	if (!buff) {
-		spin_unlock_bh(&bat_priv->hna_ghash_lock);
-		return -ENOMEM;
+		spin_unlock_bh(&bat_priv->tt_ghash_lock);
+		ret = -ENOMEM;
+		goto out;
 	}
 	buff[0] = '\0';
 	pos = 0;
@@ -508,101 +535,104 @@ int hna_global_seq_print_text(struct seq_file *seq, void *offset)
 		head = &hash->table[i];
 
 		rcu_read_lock();
-		hlist_for_each_entry_rcu(hna_global_entry, node,
+		hlist_for_each_entry_rcu(tt_global_entry, node,
 					 head, hash_entry) {
 			pos += snprintf(buff + pos, 44,
 					" * %pM via %pM\n",
-					hna_global_entry->addr,
-					hna_global_entry->orig_node->orig);
+					tt_global_entry->addr,
+					tt_global_entry->orig_node->orig);
 		}
 		rcu_read_unlock();
 	}
 
-	spin_unlock_bh(&bat_priv->hna_ghash_lock);
+	spin_unlock_bh(&bat_priv->tt_ghash_lock);
 
 	seq_printf(seq, "%s", buff);
 	kfree(buff);
-	return 0;
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	return ret;
 }
 
-static void _hna_global_del_orig(struct bat_priv *bat_priv,
-				 struct hna_global_entry *hna_global_entry,
+static void _tt_global_del_orig(struct bat_priv *bat_priv,
+				 struct tt_global_entry *tt_global_entry,
 				 char *message)
 {
 	bat_dbg(DBG_ROUTES, bat_priv,
-		"Deleting global hna entry %pM (via %pM): %s\n",
-		hna_global_entry->addr, hna_global_entry->orig_node->orig,
+		"Deleting global tt entry %pM (via %pM): %s\n",
+		tt_global_entry->addr, tt_global_entry->orig_node->orig,
 		message);
 
-	hash_remove(bat_priv->hna_global_hash, compare_ghna, choose_orig,
-		    hna_global_entry->addr);
-	kfree(hna_global_entry);
+	hash_remove(bat_priv->tt_global_hash, compare_gtt, choose_orig,
+		    tt_global_entry->addr);
+	kfree(tt_global_entry);
 }
 
-void hna_global_del_orig(struct bat_priv *bat_priv,
+void tt_global_del_orig(struct bat_priv *bat_priv,
 			 struct orig_node *orig_node, char *message)
 {
-	struct hna_global_entry *hna_global_entry;
-	int hna_buff_count = 0;
-	unsigned char *hna_ptr;
+	struct tt_global_entry *tt_global_entry;
+	int tt_buff_count = 0;
+	unsigned char *tt_ptr;
 
-	if (orig_node->hna_buff_len == 0)
+	if (orig_node->tt_buff_len == 0)
 		return;
 
-	spin_lock_bh(&bat_priv->hna_ghash_lock);
+	spin_lock_bh(&bat_priv->tt_ghash_lock);
 
-	while ((hna_buff_count + 1) * ETH_ALEN <= orig_node->hna_buff_len) {
-		hna_ptr = orig_node->hna_buff + (hna_buff_count * ETH_ALEN);
-		hna_global_entry = hna_global_hash_find(bat_priv, hna_ptr);
+	while ((tt_buff_count + 1) * ETH_ALEN <= orig_node->tt_buff_len) {
+		tt_ptr = orig_node->tt_buff + (tt_buff_count * ETH_ALEN);
+		tt_global_entry = tt_global_hash_find(bat_priv, tt_ptr);
 
-		if ((hna_global_entry) &&
-		    (hna_global_entry->orig_node == orig_node))
-			_hna_global_del_orig(bat_priv, hna_global_entry,
+		if ((tt_global_entry) &&
+		    (tt_global_entry->orig_node == orig_node))
+			_tt_global_del_orig(bat_priv, tt_global_entry,
 					     message);
 
-		hna_buff_count++;
+		tt_buff_count++;
 	}
 
-	spin_unlock_bh(&bat_priv->hna_ghash_lock);
+	spin_unlock_bh(&bat_priv->tt_ghash_lock);
 
-	orig_node->hna_buff_len = 0;
-	kfree(orig_node->hna_buff);
-	orig_node->hna_buff = NULL;
+	orig_node->tt_buff_len = 0;
+	kfree(orig_node->tt_buff);
+	orig_node->tt_buff = NULL;
 }
 
-static void hna_global_del(struct hlist_node *node, void *arg)
+static void tt_global_del(struct hlist_node *node, void *arg)
 {
-	void *data = container_of(node, struct hna_global_entry, hash_entry);
+	void *data = container_of(node, struct tt_global_entry, hash_entry);
 
 	kfree(data);
 }
 
-void hna_global_free(struct bat_priv *bat_priv)
+void tt_global_free(struct bat_priv *bat_priv)
 {
-	if (!bat_priv->hna_global_hash)
+	if (!bat_priv->tt_global_hash)
 		return;
 
-	hash_delete(bat_priv->hna_global_hash, hna_global_del, NULL);
-	bat_priv->hna_global_hash = NULL;
+	hash_delete(bat_priv->tt_global_hash, tt_global_del, NULL);
+	bat_priv->tt_global_hash = NULL;
 }
 
 struct orig_node *transtable_search(struct bat_priv *bat_priv, uint8_t *addr)
 {
-	struct hna_global_entry *hna_global_entry;
+	struct tt_global_entry *tt_global_entry;
 	struct orig_node *orig_node = NULL;
 
-	spin_lock_bh(&bat_priv->hna_ghash_lock);
-	hna_global_entry = hna_global_hash_find(bat_priv, addr);
+	spin_lock_bh(&bat_priv->tt_ghash_lock);
+	tt_global_entry = tt_global_hash_find(bat_priv, addr);
 
-	if (!hna_global_entry)
+	if (!tt_global_entry)
 		goto out;
 
-	if (!atomic_inc_not_zero(&hna_global_entry->orig_node->refcount))
+	if (!atomic_inc_not_zero(&tt_global_entry->orig_node->refcount))
 		goto out;
 
-	orig_node = hna_global_entry->orig_node;
+	orig_node = tt_global_entry->orig_node;
 
 out:
-	spin_unlock_bh(&bat_priv->hna_ghash_lock);
+	spin_unlock_bh(&bat_priv->tt_ghash_lock);
 	return orig_node;
 }
diff --git a/net/batman-adv/translation-table.h b/net/batman-adv/translation-table.h
index f19931ca145..46152c38cc9 100644
--- a/net/batman-adv/translation-table.h
+++ b/net/batman-adv/translation-table.h
@@ -22,22 +22,22 @@
 #ifndef _NET_BATMAN_ADV_TRANSLATION_TABLE_H_
 #define _NET_BATMAN_ADV_TRANSLATION_TABLE_H_
 
-int hna_local_init(struct bat_priv *bat_priv);
-void hna_local_add(struct net_device *soft_iface, uint8_t *addr);
-void hna_local_remove(struct bat_priv *bat_priv,
+int tt_local_init(struct bat_priv *bat_priv);
+void tt_local_add(struct net_device *soft_iface, uint8_t *addr);
+void tt_local_remove(struct bat_priv *bat_priv,
 		      uint8_t *addr, char *message);
-int hna_local_fill_buffer(struct bat_priv *bat_priv,
+int tt_local_fill_buffer(struct bat_priv *bat_priv,
 			  unsigned char *buff, int buff_len);
-int hna_local_seq_print_text(struct seq_file *seq, void *offset);
-void hna_local_free(struct bat_priv *bat_priv);
-int hna_global_init(struct bat_priv *bat_priv);
-void hna_global_add_orig(struct bat_priv *bat_priv,
+int tt_local_seq_print_text(struct seq_file *seq, void *offset);
+void tt_local_free(struct bat_priv *bat_priv);
+int tt_global_init(struct bat_priv *bat_priv);
+void tt_global_add_orig(struct bat_priv *bat_priv,
 			 struct orig_node *orig_node,
-			 unsigned char *hna_buff, int hna_buff_len);
-int hna_global_seq_print_text(struct seq_file *seq, void *offset);
-void hna_global_del_orig(struct bat_priv *bat_priv,
+			 unsigned char *tt_buff, int tt_buff_len);
+int tt_global_seq_print_text(struct seq_file *seq, void *offset);
+void tt_global_del_orig(struct bat_priv *bat_priv,
 			 struct orig_node *orig_node, char *message);
-void hna_global_free(struct bat_priv *bat_priv);
+void tt_global_free(struct bat_priv *bat_priv);
 struct orig_node *transtable_search(struct bat_priv *bat_priv, uint8_t *addr);
 
 #endif /* _NET_BATMAN_ADV_TRANSLATION_TABLE_H_ */
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 83445cf0cc9..fab70e8b16e 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -67,7 +67,7 @@ struct hard_iface {
 struct orig_node {
 	uint8_t orig[ETH_ALEN];
 	uint8_t primary_addr[ETH_ALEN];
-	struct neigh_node *router;
+	struct neigh_node __rcu *router; /* rcu protected pointer */
 	unsigned long *bcast_own;
 	uint8_t *bcast_own_sum;
 	unsigned long last_valid;
@@ -75,25 +75,25 @@ struct orig_node {
 	unsigned long batman_seqno_reset;
 	uint8_t gw_flags;
 	uint8_t flags;
-	unsigned char *hna_buff;
-	int16_t hna_buff_len;
+	unsigned char *tt_buff;
+	int16_t tt_buff_len;
 	uint32_t last_real_seqno;
 	uint8_t last_ttl;
 	unsigned long bcast_bits[NUM_WORDS];
 	uint32_t last_bcast_seqno;
 	struct hlist_head neigh_list;
 	struct list_head frag_list;
-	spinlock_t neigh_list_lock; /* protects neighbor list */
+	spinlock_t neigh_list_lock; /* protects neigh_list and router */
 	atomic_t refcount;
 	struct rcu_head rcu;
 	struct hlist_node hash_entry;
 	struct bat_priv *bat_priv;
 	unsigned long last_frag_packet;
-	spinlock_t ogm_cnt_lock; /* protects: bcast_own, bcast_own_sum,
-				  * neigh_node->real_bits,
-				  * neigh_node->real_packet_count */
-	spinlock_t bcast_seqno_lock; /* protects bcast_bits,
-				      *	 last_bcast_seqno */
+	/* ogm_cnt_lock protects: bcast_own, bcast_own_sum,
+	 * neigh_node->real_bits, neigh_node->real_packet_count */
+	spinlock_t ogm_cnt_lock;
+	/* bcast_seqno_lock protects bcast_bits, last_bcast_seqno */
+	spinlock_t bcast_seqno_lock;
 	atomic_t bond_candidates;
 	struct list_head bond_list;
 };
@@ -125,6 +125,7 @@ struct neigh_node {
 	struct rcu_head rcu;
 	struct orig_node *orig_node;
 	struct hard_iface *if_incoming;
+	spinlock_t tq_lock;	/* protects: tq_recv, tq_index */
 };
 
 
@@ -145,34 +146,34 @@ struct bat_priv {
 	atomic_t bcast_queue_left;
 	atomic_t batman_queue_left;
 	char num_ifaces;
-	struct hlist_head softif_neigh_list;
-	struct softif_neigh *softif_neigh;
 	struct debug_log *debug_log;
-	struct hard_iface *primary_if;
 	struct kobject *mesh_obj;
 	struct dentry *debug_dir;
 	struct hlist_head forw_bat_list;
 	struct hlist_head forw_bcast_list;
 	struct hlist_head gw_list;
+	struct hlist_head softif_neigh_vids;
 	struct list_head vis_send_list;
 	struct hashtable_t *orig_hash;
-	struct hashtable_t *hna_local_hash;
-	struct hashtable_t *hna_global_hash;
+	struct hashtable_t *tt_local_hash;
+	struct hashtable_t *tt_global_hash;
 	struct hashtable_t *vis_hash;
 	spinlock_t forw_bat_list_lock; /* protects forw_bat_list */
 	spinlock_t forw_bcast_list_lock; /* protects  */
-	spinlock_t hna_lhash_lock; /* protects hna_local_hash */
-	spinlock_t hna_ghash_lock; /* protects hna_global_hash */
+	spinlock_t tt_lhash_lock; /* protects tt_local_hash */
+	spinlock_t tt_ghash_lock; /* protects tt_global_hash */
 	spinlock_t gw_list_lock; /* protects gw_list and curr_gw */
 	spinlock_t vis_hash_lock; /* protects vis_hash */
 	spinlock_t vis_list_lock; /* protects vis_info::recv_list */
 	spinlock_t softif_neigh_lock; /* protects soft-interface neigh list */
-	int16_t num_local_hna;
-	atomic_t hna_local_changed;
-	struct delayed_work hna_work;
+	spinlock_t softif_neigh_vid_lock; /* protects soft-interface vid list */
+	int16_t num_local_tt;
+	atomic_t tt_local_changed;
+	struct delayed_work tt_work;
 	struct delayed_work orig_work;
 	struct delayed_work vis_work;
 	struct gw_node __rcu *curr_gw;  /* rcu protected pointer */
+	struct hard_iface __rcu *primary_if;  /* rcu protected pointer */
 	struct vis_info *my_vis_info;
 };
 
@@ -191,14 +192,14 @@ struct socket_packet {
 	struct icmp_packet_rr icmp_packet;
 };
 
-struct hna_local_entry {
+struct tt_local_entry {
 	uint8_t addr[ETH_ALEN];
 	unsigned long last_seen;
 	char never_purge;
 	struct hlist_node hash_entry;
 };
 
-struct hna_global_entry {
+struct tt_global_entry {
 	uint8_t addr[ETH_ALEN];
 	struct orig_node *orig_node;
 	struct hlist_node hash_entry;
@@ -261,7 +262,7 @@ struct vis_info {
 struct vis_info_entry {
 	uint8_t  src[ETH_ALEN];
 	uint8_t  dest[ETH_ALEN];
-	uint8_t  quality;	/* quality = 0 means HNA */
+	uint8_t  quality;	/* quality = 0 client */
 } __packed;
 
 struct recvlist_node {
@@ -269,11 +270,20 @@ struct recvlist_node {
 	uint8_t mac[ETH_ALEN];
 };
 
+struct softif_neigh_vid {
+	struct hlist_node list;
+	struct bat_priv *bat_priv;
+	short vid;
+	atomic_t refcount;
+	struct softif_neigh __rcu *softif_neigh;
+	struct rcu_head rcu;
+	struct hlist_head softif_neigh_list;
+};
+
 struct softif_neigh {
 	struct hlist_node list;
 	uint8_t addr[ETH_ALEN];
 	unsigned long last_seen;
-	short vid;
 	atomic_t refcount;
 	struct rcu_head rcu;
 };
diff --git a/net/batman-adv/unicast.c b/net/batman-adv/unicast.c
index 19f84bd443a..19c3daf34ac 100644
--- a/net/batman-adv/unicast.c
+++ b/net/batman-adv/unicast.c
@@ -221,15 +221,17 @@ int frag_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv,
 		  struct hard_iface *hard_iface, uint8_t dstaddr[])
 {
 	struct unicast_packet tmp_uc, *unicast_packet;
+	struct hard_iface *primary_if;
 	struct sk_buff *frag_skb;
 	struct unicast_frag_packet *frag1, *frag2;
 	int uc_hdr_len = sizeof(struct unicast_packet);
 	int ucf_hdr_len = sizeof(struct unicast_frag_packet);
 	int data_len = skb->len - uc_hdr_len;
-	int large_tail = 0;
+	int large_tail = 0, ret = NET_RX_DROP;
 	uint16_t seqno;
 
-	if (!bat_priv->primary_if)
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
 		goto dropped;
 
 	frag_skb = dev_alloc_skb(data_len - (data_len / 2) + ucf_hdr_len);
@@ -254,7 +256,7 @@ int frag_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv,
 	frag1->version = COMPAT_VERSION;
 	frag1->packet_type = BAT_UNICAST_FRAG;
 
-	memcpy(frag1->orig, bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+	memcpy(frag1->orig, primary_if->net_dev->dev_addr, ETH_ALEN);
 	memcpy(frag2, frag1, sizeof(struct unicast_frag_packet));
 
 	if (data_len & 1)
@@ -269,13 +271,17 @@ int frag_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv,
 
 	send_skb_packet(skb, hard_iface, dstaddr);
 	send_skb_packet(frag_skb, hard_iface, dstaddr);
-	return NET_RX_SUCCESS;
+	ret = NET_RX_SUCCESS;
+	goto out;
 
 drop_frag:
 	kfree_skb(frag_skb);
 dropped:
 	kfree_skb(skb);
-	return NET_RX_DROP;
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	return ret;
 }
 
 int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv)
@@ -289,12 +295,12 @@ int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv)
 
 	/* get routing information */
 	if (is_multicast_ether_addr(ethhdr->h_dest)) {
-		orig_node = (struct orig_node *)gw_get_selected(bat_priv);
+		orig_node = (struct orig_node *)gw_get_selected_orig(bat_priv);
 		if (orig_node)
 			goto find_router;
 	}
 
-	/* check for hna host - increases orig_node refcount */
+	/* check for tt host - increases orig_node refcount */
 	orig_node = transtable_search(bat_priv, ethhdr->h_dest);
 
 find_router:
diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c
index f90212f4208..c39f20cc1ba 100644
--- a/net/batman-adv/vis.c
+++ b/net/batman-adv/vis.c
@@ -194,7 +194,7 @@ static ssize_t vis_data_read_entry(char *buff, struct vis_info_entry *entry,
 {
 	/* maximal length: max(4+17+2, 3+17+1+3+2) == 26 */
 	if (primary && entry->quality == 0)
-		return sprintf(buff, "HNA %pM, ", entry->dest);
+		return sprintf(buff, "TT %pM, ", entry->dest);
 	else if (compare_eth(entry->src, src))
 		return sprintf(buff, "TQ %pM %d, ", entry->dest,
 			       entry->quality);
@@ -204,6 +204,7 @@ static ssize_t vis_data_read_entry(char *buff, struct vis_info_entry *entry,
 
 int vis_seq_print_text(struct seq_file *seq, void *offset)
 {
+	struct hard_iface *primary_if;
 	struct hlist_node *node;
 	struct hlist_head *head;
 	struct vis_info *info;
@@ -215,15 +216,18 @@ int vis_seq_print_text(struct seq_file *seq, void *offset)
 	HLIST_HEAD(vis_if_list);
 	struct if_list_entry *entry;
 	struct hlist_node *pos, *n;
-	int i, j;
+	int i, j, ret = 0;
 	int vis_server = atomic_read(&bat_priv->vis_mode);
 	size_t buff_pos, buf_size;
 	char *buff;
 	int compare;
 
-	if ((!bat_priv->primary_if) ||
-	    (vis_server == VIS_TYPE_CLIENT_UPDATE))
-		return 0;
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
+		goto out;
+
+	if (vis_server == VIS_TYPE_CLIENT_UPDATE)
+		goto out;
 
 	buf_size = 1;
 	/* Estimate length */
@@ -270,7 +274,8 @@ int vis_seq_print_text(struct seq_file *seq, void *offset)
 	buff = kmalloc(buf_size, GFP_ATOMIC);
 	if (!buff) {
 		spin_unlock_bh(&bat_priv->vis_hash_lock);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out;
 	}
 	buff[0] = '\0';
 	buff_pos = 0;
@@ -328,7 +333,10 @@ int vis_seq_print_text(struct seq_file *seq, void *offset)
 	seq_printf(seq, "%s", buff);
 	kfree(buff);
 
-	return 0;
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
+	return ret;
 }
 
 /* add the info packet to the send list, if it was not
@@ -558,6 +566,7 @@ static int find_best_vis_server(struct bat_priv *bat_priv,
 				struct vis_info *info)
 {
 	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct neigh_node *router;
 	struct hlist_node *node;
 	struct hlist_head *head;
 	struct orig_node *orig_node;
@@ -571,13 +580,17 @@ static int find_best_vis_server(struct bat_priv *bat_priv,
 
 		rcu_read_lock();
 		hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) {
-			if ((orig_node) && (orig_node->router) &&
-			    (orig_node->flags & VIS_SERVER) &&
-			    (orig_node->router->tq_avg > best_tq)) {
-				best_tq = orig_node->router->tq_avg;
+			router = orig_node_get_router(orig_node);
+			if (!router)
+				continue;
+
+			if ((orig_node->flags & VIS_SERVER) &&
+			    (router->tq_avg > best_tq)) {
+				best_tq = router->tq_avg;
 				memcpy(packet->target_orig, orig_node->orig,
 				       ETH_ALEN);
 			}
+			neigh_node_free_ref(router);
 		}
 		rcu_read_unlock();
 	}
@@ -605,11 +618,11 @@ static int generate_vis_packet(struct bat_priv *bat_priv)
 	struct hlist_node *node;
 	struct hlist_head *head;
 	struct orig_node *orig_node;
-	struct neigh_node *neigh_node;
+	struct neigh_node *router;
 	struct vis_info *info = (struct vis_info *)bat_priv->my_vis_info;
 	struct vis_packet *packet = (struct vis_packet *)info->skb_packet->data;
 	struct vis_info_entry *entry;
-	struct hna_local_entry *hna_local_entry;
+	struct tt_local_entry *tt_local_entry;
 	int best_tq = -1, i;
 
 	info->first_seen = jiffies;
@@ -633,59 +646,61 @@ static int generate_vis_packet(struct bat_priv *bat_priv)
 
 		rcu_read_lock();
 		hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) {
-			neigh_node = orig_node->router;
-
-			if (!neigh_node)
+			router = orig_node_get_router(orig_node);
+			if (!router)
 				continue;
 
-			if (!compare_eth(neigh_node->addr, orig_node->orig))
-				continue;
+			if (!compare_eth(router->addr, orig_node->orig))
+				goto next;
 
-			if (neigh_node->if_incoming->if_status != IF_ACTIVE)
-				continue;
+			if (router->if_incoming->if_status != IF_ACTIVE)
+				goto next;
 
-			if (neigh_node->tq_avg < 1)
-				continue;
+			if (router->tq_avg < 1)
+				goto next;
 
 			/* fill one entry into buffer. */
 			entry = (struct vis_info_entry *)
 				      skb_put(info->skb_packet, sizeof(*entry));
 			memcpy(entry->src,
-			       neigh_node->if_incoming->net_dev->dev_addr,
+			       router->if_incoming->net_dev->dev_addr,
 			       ETH_ALEN);
 			memcpy(entry->dest, orig_node->orig, ETH_ALEN);
-			entry->quality = neigh_node->tq_avg;
+			entry->quality = router->tq_avg;
 			packet->entries++;
 
+next:
+			neigh_node_free_ref(router);
+
 			if (vis_packet_full(info))
 				goto unlock;
 		}
 		rcu_read_unlock();
 	}
 
-	hash = bat_priv->hna_local_hash;
+	hash = bat_priv->tt_local_hash;
 
-	spin_lock_bh(&bat_priv->hna_lhash_lock);
+	spin_lock_bh(&bat_priv->tt_lhash_lock);
 	for (i = 0; i < hash->size; i++) {
 		head = &hash->table[i];
 
-		hlist_for_each_entry(hna_local_entry, node, head, hash_entry) {
+		hlist_for_each_entry(tt_local_entry, node, head, hash_entry) {
 			entry = (struct vis_info_entry *)
 					skb_put(info->skb_packet,
 						sizeof(*entry));
 			memset(entry->src, 0, ETH_ALEN);
-			memcpy(entry->dest, hna_local_entry->addr, ETH_ALEN);
-			entry->quality = 0; /* 0 means HNA */
+			memcpy(entry->dest, tt_local_entry->addr, ETH_ALEN);
+			entry->quality = 0; /* 0 means TT */
 			packet->entries++;
 
 			if (vis_packet_full(info)) {
-				spin_unlock_bh(&bat_priv->hna_lhash_lock);
+				spin_unlock_bh(&bat_priv->tt_lhash_lock);
 				return 0;
 			}
 		}
 	}
 
-	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	spin_unlock_bh(&bat_priv->tt_lhash_lock);
 	return 0;
 
 unlock:
@@ -725,6 +740,7 @@ static void purge_vis_packets(struct bat_priv *bat_priv)
 static void broadcast_vis_packet(struct bat_priv *bat_priv,
 				 struct vis_info *info)
 {
+	struct neigh_node *router;
 	struct hashtable_t *hash = bat_priv->orig_hash;
 	struct hlist_node *node;
 	struct hlist_head *head;
@@ -745,19 +761,26 @@ static void broadcast_vis_packet(struct bat_priv *bat_priv,
 		rcu_read_lock();
 		hlist_for_each_entry_rcu(orig_node, node, head, hash_entry) {
 			/* if it's a vis server and reachable, send it. */
-			if ((!orig_node) || (!orig_node->router))
-				continue;
 			if (!(orig_node->flags & VIS_SERVER))
 				continue;
+
+			router = orig_node_get_router(orig_node);
+			if (!router)
+				continue;
+
 			/* don't send it if we already received the packet from
-			* this node. */
+			 * this node. */
 			if (recv_list_is_in(bat_priv, &info->recv_list,
-					    orig_node->orig))
+					    orig_node->orig)) {
+				neigh_node_free_ref(router);
 				continue;
+			}
 
 			memcpy(packet->target_orig, orig_node->orig, ETH_ALEN);
-			hard_iface = orig_node->router->if_incoming;
-			memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+			hard_iface = router->if_incoming;
+			memcpy(dstaddr, router->addr, ETH_ALEN);
+
+			neigh_node_free_ref(router);
 
 			skb = skb_clone(info->skb_packet, GFP_ATOMIC);
 			if (skb)
@@ -772,60 +795,48 @@ static void unicast_vis_packet(struct bat_priv *bat_priv,
 			       struct vis_info *info)
 {
 	struct orig_node *orig_node;
-	struct neigh_node *neigh_node = NULL;
+	struct neigh_node *router = NULL;
 	struct sk_buff *skb;
 	struct vis_packet *packet;
 
 	packet = (struct vis_packet *)info->skb_packet->data;
 
-	rcu_read_lock();
 	orig_node = orig_hash_find(bat_priv, packet->target_orig);
-
 	if (!orig_node)
-		goto unlock;
-
-	neigh_node = orig_node->router;
+		goto out;
 
-	if (!neigh_node)
-		goto unlock;
-
-	if (!atomic_inc_not_zero(&neigh_node->refcount)) {
-		neigh_node = NULL;
-		goto unlock;
-	}
-
-	rcu_read_unlock();
+	router = orig_node_get_router(orig_node);
+	if (!router)
+		goto out;
 
 	skb = skb_clone(info->skb_packet, GFP_ATOMIC);
 	if (skb)
-		send_skb_packet(skb, neigh_node->if_incoming,
-				neigh_node->addr);
+		send_skb_packet(skb, router->if_incoming, router->addr);
 
-	goto out;
-
-unlock:
-	rcu_read_unlock();
 out:
-	if (neigh_node)
-		neigh_node_free_ref(neigh_node);
+	if (router)
+		neigh_node_free_ref(router);
 	if (orig_node)
 		orig_node_free_ref(orig_node);
-	return;
 }
 
 /* only send one vis packet. called from send_vis_packets() */
 static void send_vis_packet(struct bat_priv *bat_priv, struct vis_info *info)
 {
+	struct hard_iface *primary_if;
 	struct vis_packet *packet;
 
+	primary_if = primary_if_get_selected(bat_priv);
+	if (!primary_if)
+		goto out;
+
 	packet = (struct vis_packet *)info->skb_packet->data;
 	if (packet->ttl < 2) {
 		pr_debug("Error - can't send vis packet: ttl exceeded\n");
-		return;
+		goto out;
 	}
 
-	memcpy(packet->sender_orig, bat_priv->primary_if->net_dev->dev_addr,
-	       ETH_ALEN);
+	memcpy(packet->sender_orig, primary_if->net_dev->dev_addr, ETH_ALEN);
 	packet->ttl--;
 
 	if (is_broadcast_ether_addr(packet->target_orig))
@@ -833,6 +844,10 @@ static void send_vis_packet(struct bat_priv *bat_priv, struct vis_info *info)
 	else
 		unicast_vis_packet(bat_priv, info);
 	packet->ttl++; /* restore TTL */
+
+out:
+	if (primary_if)
+		hardif_free_ref(primary_if);
 }
 
 /* called from timer; send (and maybe generate) vis packet. */
@@ -859,8 +874,7 @@ static void send_vis_packets(struct work_struct *work)
 		kref_get(&info->refcount);
 		spin_unlock_bh(&bat_priv->vis_hash_lock);
 
-		if (bat_priv->primary_if)
-			send_vis_packet(bat_priv, info);
+		send_vis_packet(bat_priv, info);
 
 		spin_lock_bh(&bat_priv->vis_hash_lock);
 		send_list_del(info);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 4487bbd0d72..815269b07f2 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2004,7 +2004,7 @@ static void hci_tx_task(unsigned long arg)
 	read_unlock(&hci_task_lock);
 }
 
-/* ----- HCI RX task (incoming data proccessing) ----- */
+/* ----- HCI RX task (incoming data processing) ----- */
 
 /* ACL data packet */
 static inline void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index a5ab4a29ae3..a86f9ba4f05 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3666,7 +3666,7 @@ drop:
 static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk_buff *skb)
 {
 	struct l2cap_chan *chan;
-	struct sock *sk;
+	struct sock *sk = NULL;
 	struct l2cap_pinfo *pi;
 	u16 control;
 	u8 tx_seq;
@@ -3755,7 +3755,7 @@ done:
 
 static inline int l2cap_conless_channel(struct l2cap_conn *conn, __le16 psm, struct sk_buff *skb)
 {
-	struct sock *sk;
+	struct sock *sk = NULL;
 	struct l2cap_chan *chan;
 
 	chan = l2cap_global_chan_by_psm(0, psm, conn->src);
@@ -3788,7 +3788,7 @@ done:
 
 static inline int l2cap_att_channel(struct l2cap_conn *conn, __le16 cid, struct sk_buff *skb)
 {
-	struct sock *sk;
+	struct sock *sk = NULL;
 	struct l2cap_chan *chan;
 
 	chan = l2cap_global_chan_by_scid(0, cid, conn->src);
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index c98360d40b8..18dc9888d8c 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -649,7 +649,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, ch
 
 		if (opt == BT_FLUSHABLE_OFF) {
 			struct l2cap_conn *conn = chan->conn;
-			/* proceed futher only when we have l2cap_conn and
+			/* proceed further only when we have l2cap_conn and
 			   No Flush support in the LM */
 			if (!conn || !lmp_no_flush_capable(conn->hcon->hdev)) {
 				err = -EINVAL;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 94954c74f6a..42fdffd1d76 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -369,15 +369,6 @@ static void __sco_sock_close(struct sock *sk)
 
 	case BT_CONNECTED:
 	case BT_CONFIG:
-		if (sco_pi(sk)->conn) {
-			sk->sk_state = BT_DISCONN;
-			sco_sock_set_timer(sk, SCO_DISCONN_TIMEOUT);
-			hci_conn_put(sco_pi(sk)->conn->hcon);
-			sco_pi(sk)->conn = NULL;
-		} else
-			sco_chan_del(sk, ECONNRESET);
-		break;
-
 	case BT_CONNECT:
 	case BT_DISCONN:
 		sco_chan_del(sk, ECONNRESET);
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 84bbb82599b..f20c4fd915a 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -104,3 +104,4 @@ module_init(br_init)
 module_exit(br_deinit)
 MODULE_LICENSE("GPL");
 MODULE_VERSION(BR_VERSION);
+MODULE_ALIAS_RTNL_LINK("bridge");
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 21e5901186e..a6b2f86378c 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -74,13 +74,23 @@ out:
 	return NETDEV_TX_OK;
 }
 
+static int br_dev_init(struct net_device *dev)
+{
+	struct net_bridge *br = netdev_priv(dev);
+
+	br->stats = alloc_percpu(struct br_cpu_netstats);
+	if (!br->stats)
+		return -ENOMEM;
+
+	return 0;
+}
+
 static int br_dev_open(struct net_device *dev)
 {
 	struct net_bridge *br = netdev_priv(dev);
 
 	netif_carrier_off(dev);
-
-	br_features_recompute(br);
+	netdev_update_features(dev);
 	netif_start_queue(dev);
 	br_stp_enable_bridge(br);
 	br_multicast_open(br);
@@ -177,48 +187,11 @@ static void br_getinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 	strcpy(info->bus_info, "N/A");
 }
 
-static int br_set_sg(struct net_device *dev, u32 data)
-{
-	struct net_bridge *br = netdev_priv(dev);
-
-	if (data)
-		br->feature_mask |= NETIF_F_SG;
-	else
-		br->feature_mask &= ~NETIF_F_SG;
-
-	br_features_recompute(br);
-	return 0;
-}
-
-static int br_set_tso(struct net_device *dev, u32 data)
-{
-	struct net_bridge *br = netdev_priv(dev);
-
-	if (data)
-		br->feature_mask |= NETIF_F_TSO;
-	else
-		br->feature_mask &= ~NETIF_F_TSO;
-
-	br_features_recompute(br);
-	return 0;
-}
-
-static int br_set_tx_csum(struct net_device *dev, u32 data)
+static u32 br_fix_features(struct net_device *dev, u32 features)
 {
 	struct net_bridge *br = netdev_priv(dev);
 
-	if (data)
-		br->feature_mask |= NETIF_F_NO_CSUM;
-	else
-		br->feature_mask &= ~NETIF_F_ALL_CSUM;
-
-	br_features_recompute(br);
-	return 0;
-}
-
-static int br_set_flags(struct net_device *netdev, u32 data)
-{
-	return ethtool_op_set_flags(netdev, data, ETH_FLAG_TXVLAN);
+	return br_features_recompute(br, features);
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -319,21 +292,12 @@ static int br_del_slave(struct net_device *dev, struct net_device *slave_dev)
 static const struct ethtool_ops br_ethtool_ops = {
 	.get_drvinfo    = br_getinfo,
 	.get_link	= ethtool_op_get_link,
-	.get_tx_csum	= ethtool_op_get_tx_csum,
-	.set_tx_csum 	= br_set_tx_csum,
-	.get_sg		= ethtool_op_get_sg,
-	.set_sg		= br_set_sg,
-	.get_tso	= ethtool_op_get_tso,
-	.set_tso	= br_set_tso,
-	.get_ufo	= ethtool_op_get_ufo,
-	.set_ufo	= ethtool_op_set_ufo,
-	.get_flags	= ethtool_op_get_flags,
-	.set_flags	= br_set_flags,
 };
 
 static const struct net_device_ops br_netdev_ops = {
 	.ndo_open		 = br_dev_open,
 	.ndo_stop		 = br_dev_stop,
+	.ndo_init		 = br_dev_init,
 	.ndo_start_xmit		 = br_dev_xmit,
 	.ndo_get_stats64	 = br_get_stats64,
 	.ndo_set_mac_address	 = br_set_mac_address,
@@ -347,6 +311,7 @@ static const struct net_device_ops br_netdev_ops = {
 #endif
 	.ndo_add_slave		 = br_add_slave,
 	.ndo_del_slave		 = br_del_slave,
+	.ndo_fix_features        = br_fix_features,
 };
 
 static void br_dev_free(struct net_device *dev)
@@ -357,18 +322,49 @@ static void br_dev_free(struct net_device *dev)
 	free_netdev(dev);
 }
 
+static struct device_type br_type = {
+	.name	= "bridge",
+};
+
 void br_dev_setup(struct net_device *dev)
 {
+	struct net_bridge *br = netdev_priv(dev);
+
 	random_ether_addr(dev->dev_addr);
 	ether_setup(dev);
 
 	dev->netdev_ops = &br_netdev_ops;
 	dev->destructor = br_dev_free;
 	SET_ETHTOOL_OPS(dev, &br_ethtool_ops);
+	SET_NETDEV_DEVTYPE(dev, &br_type);
 	dev->tx_queue_len = 0;
 	dev->priv_flags = IFF_EBRIDGE;
 
 	dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA |
 			NETIF_F_GSO_MASK | NETIF_F_NO_CSUM | NETIF_F_LLTX |
-			NETIF_F_NETNS_LOCAL | NETIF_F_GSO | NETIF_F_HW_VLAN_TX;
+			NETIF_F_NETNS_LOCAL | NETIF_F_HW_VLAN_TX;
+	dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA |
+			   NETIF_F_GSO_MASK | NETIF_F_NO_CSUM |
+			   NETIF_F_HW_VLAN_TX;
+
+	br->dev = dev;
+	spin_lock_init(&br->lock);
+	INIT_LIST_HEAD(&br->port_list);
+	spin_lock_init(&br->hash_lock);
+
+	br->bridge_id.prio[0] = 0x80;
+	br->bridge_id.prio[1] = 0x00;
+
+	memcpy(br->group_addr, br_group_address, ETH_ALEN);
+
+	br->stp_enabled = BR_NO_STP;
+	br->designated_root = br->bridge_id;
+	br->bridge_max_age = br->max_age = 20 * HZ;
+	br->bridge_hello_time = br->hello_time = 2 * HZ;
+	br->bridge_forward_delay = br->forward_delay = 15 * HZ;
+	br->ageing_time = 300 * HZ;
+
+	br_netfilter_rtable_init(br);
+	br_stp_timer_init(br);
+	br_multicast_init(br);
 }
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index 88485cc74dc..e0dfbc151dd 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -28,6 +28,7 @@
 static struct kmem_cache *br_fdb_cache __read_mostly;
 static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
 		      const unsigned char *addr);
+static void fdb_notify(const struct net_bridge_fdb_entry *, int);
 
 static u32 fdb_salt __read_mostly;
 
@@ -62,7 +63,7 @@ static inline int has_expired(const struct net_bridge *br,
 				  const struct net_bridge_fdb_entry *fdb)
 {
 	return !fdb->is_static &&
-		time_before_eq(fdb->ageing_timer + hold_time(br), jiffies);
+		time_before_eq(fdb->updated + hold_time(br), jiffies);
 }
 
 static inline int br_mac_hash(const unsigned char *mac)
@@ -81,6 +82,7 @@ static void fdb_rcu_free(struct rcu_head *head)
 
 static inline void fdb_delete(struct net_bridge_fdb_entry *f)
 {
+	fdb_notify(f, RTM_DELNEIGH);
 	hlist_del_rcu(&f->hlist);
 	call_rcu(&f->rcu, fdb_rcu_free);
 }
@@ -140,7 +142,7 @@ void br_fdb_cleanup(unsigned long _data)
 			unsigned long this_timer;
 			if (f->is_static)
 				continue;
-			this_timer = f->ageing_timer + delay;
+			this_timer = f->updated + delay;
 			if (time_before_eq(this_timer, jiffies))
 				fdb_delete(f);
 			else if (time_before(this_timer, next_timer))
@@ -169,7 +171,7 @@ void br_fdb_flush(struct net_bridge *br)
 	spin_unlock_bh(&br->hash_lock);
 }
 
-/* Flush all entries refering to a specific port.
+/* Flush all entries referring to a specific port.
  * if do_all is set also flush static entries
  */
 void br_fdb_delete_by_port(struct net_bridge *br,
@@ -293,7 +295,7 @@ int br_fdb_fillbuf(struct net_bridge *br, void *buf,
 
 			fe->is_local = f->is_local;
 			if (!f->is_static)
-				fe->ageing_timer_value = jiffies_to_clock_t(jiffies - f->ageing_timer);
+				fe->ageing_timer_value = jiffies_to_clock_t(jiffies - f->updated);
 			++fe;
 			++num;
 		}
@@ -305,8 +307,21 @@ int br_fdb_fillbuf(struct net_bridge *br, void *buf,
 	return num;
 }
 
-static inline struct net_bridge_fdb_entry *fdb_find(struct hlist_head *head,
-						    const unsigned char *addr)
+static struct net_bridge_fdb_entry *fdb_find(struct hlist_head *head,
+					     const unsigned char *addr)
+{
+	struct hlist_node *h;
+	struct net_bridge_fdb_entry *fdb;
+
+	hlist_for_each_entry(fdb, h, head, hlist) {
+		if (!compare_ether_addr(fdb->addr.addr, addr))
+			return fdb;
+	}
+	return NULL;
+}
+
+static struct net_bridge_fdb_entry *fdb_find_rcu(struct hlist_head *head,
+						 const unsigned char *addr)
 {
 	struct hlist_node *h;
 	struct net_bridge_fdb_entry *fdb;
@@ -320,8 +335,7 @@ static inline struct net_bridge_fdb_entry *fdb_find(struct hlist_head *head,
 
 static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head,
 					       struct net_bridge_port *source,
-					       const unsigned char *addr,
-					       int is_local)
+					       const unsigned char *addr)
 {
 	struct net_bridge_fdb_entry *fdb;
 
@@ -329,11 +343,11 @@ static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head,
 	if (fdb) {
 		memcpy(fdb->addr.addr, addr, ETH_ALEN);
 		fdb->dst = source;
-		fdb->is_local = is_local;
-		fdb->is_static = is_local;
-		fdb->ageing_timer = jiffies;
-
+		fdb->is_local = 0;
+		fdb->is_static = 0;
+		fdb->updated = fdb->used = jiffies;
 		hlist_add_head_rcu(&fdb->hlist, head);
+		fdb_notify(fdb, RTM_NEWNEIGH);
 	}
 	return fdb;
 }
@@ -360,12 +374,15 @@ static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
 		fdb_delete(fdb);
 	}
 
-	if (!fdb_create(head, source, addr, 1))
+	fdb = fdb_create(head, source, addr);
+	if (!fdb)
 		return -ENOMEM;
 
+	fdb->is_local = fdb->is_static = 1;
 	return 0;
 }
 
+/* Add entry for local address of interface */
 int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
 		  const unsigned char *addr)
 {
@@ -392,7 +409,7 @@ void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
 	      source->state == BR_STATE_FORWARDING))
 		return;
 
-	fdb = fdb_find(head, addr);
+	fdb = fdb_find_rcu(head, addr);
 	if (likely(fdb)) {
 		/* attempt to update an entry for a local interface */
 		if (unlikely(fdb->is_local)) {
@@ -403,15 +420,277 @@ void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
 		} else {
 			/* fastpath: update of existing entry */
 			fdb->dst = source;
-			fdb->ageing_timer = jiffies;
+			fdb->updated = jiffies;
 		}
 	} else {
 		spin_lock(&br->hash_lock);
-		if (!fdb_find(head, addr))
-			fdb_create(head, source, addr, 0);
+		if (likely(!fdb_find(head, addr)))
+			fdb_create(head, source, addr);
+
 		/* else  we lose race and someone else inserts
 		 * it first, don't bother updating
 		 */
 		spin_unlock(&br->hash_lock);
 	}
 }
+
+static int fdb_to_nud(const struct net_bridge_fdb_entry *fdb)
+{
+	if (fdb->is_local)
+		return NUD_PERMANENT;
+	else if (fdb->is_static)
+		return NUD_NOARP;
+	else if (has_expired(fdb->dst->br, fdb))
+		return NUD_STALE;
+	else
+		return NUD_REACHABLE;
+}
+
+static int fdb_fill_info(struct sk_buff *skb,
+			 const struct net_bridge_fdb_entry *fdb,
+			 u32 pid, u32 seq, int type, unsigned int flags)
+{
+	unsigned long now = jiffies;
+	struct nda_cacheinfo ci;
+	struct nlmsghdr *nlh;
+	struct ndmsg *ndm;
+
+	nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ndm), flags);
+	if (nlh == NULL)
+		return -EMSGSIZE;
+
+
+	ndm = nlmsg_data(nlh);
+	ndm->ndm_family	 = AF_BRIDGE;
+	ndm->ndm_pad1    = 0;
+	ndm->ndm_pad2    = 0;
+	ndm->ndm_flags	 = 0;
+	ndm->ndm_type	 = 0;
+	ndm->ndm_ifindex = fdb->dst->dev->ifindex;
+	ndm->ndm_state   = fdb_to_nud(fdb);
+
+	NLA_PUT(skb, NDA_LLADDR, ETH_ALEN, &fdb->addr);
+
+	ci.ndm_used	 = jiffies_to_clock_t(now - fdb->used);
+	ci.ndm_confirmed = 0;
+	ci.ndm_updated	 = jiffies_to_clock_t(now - fdb->updated);
+	ci.ndm_refcnt	 = 0;
+	NLA_PUT(skb, NDA_CACHEINFO, sizeof(ci), &ci);
+
+	return nlmsg_end(skb, nlh);
+
+nla_put_failure:
+	nlmsg_cancel(skb, nlh);
+	return -EMSGSIZE;
+}
+
+static inline size_t fdb_nlmsg_size(void)
+{
+	return NLMSG_ALIGN(sizeof(struct ndmsg))
+		+ nla_total_size(ETH_ALEN) /* NDA_LLADDR */
+		+ nla_total_size(sizeof(struct nda_cacheinfo));
+}
+
+static void fdb_notify(const struct net_bridge_fdb_entry *fdb, int type)
+{
+	struct net *net = dev_net(fdb->dst->dev);
+	struct sk_buff *skb;
+	int err = -ENOBUFS;
+
+	skb = nlmsg_new(fdb_nlmsg_size(), GFP_ATOMIC);
+	if (skb == NULL)
+		goto errout;
+
+	err = fdb_fill_info(skb, fdb, 0, 0, type, 0);
+	if (err < 0) {
+		/* -EMSGSIZE implies BUG in fdb_nlmsg_size() */
+		WARN_ON(err == -EMSGSIZE);
+		kfree_skb(skb);
+		goto errout;
+	}
+	rtnl_notify(skb, net, 0, RTNLGRP_NEIGH, NULL, GFP_ATOMIC);
+	return;
+errout:
+	if (err < 0)
+		rtnl_set_sk_err(net, RTNLGRP_NEIGH, err);
+}
+
+/* Dump information about entries, in response to GETNEIGH */
+int br_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb)
+{
+	struct net *net = sock_net(skb->sk);
+	struct net_device *dev;
+	int idx = 0;
+
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
+		struct net_bridge *br = netdev_priv(dev);
+		int i;
+
+		if (!(dev->priv_flags & IFF_EBRIDGE))
+			continue;
+
+		for (i = 0; i < BR_HASH_SIZE; i++) {
+			struct hlist_node *h;
+			struct net_bridge_fdb_entry *f;
+
+			hlist_for_each_entry_rcu(f, h, &br->hash[i], hlist) {
+				if (idx < cb->args[0])
+					goto skip;
+
+				if (fdb_fill_info(skb, f,
+						  NETLINK_CB(cb->skb).pid,
+						  cb->nlh->nlmsg_seq,
+						  RTM_NEWNEIGH,
+						  NLM_F_MULTI) < 0)
+					break;
+skip:
+				++idx;
+			}
+		}
+	}
+	rcu_read_unlock();
+
+	cb->args[0] = idx;
+
+	return skb->len;
+}
+
+/* Create new static fdb entry */
+static int fdb_add_entry(struct net_bridge_port *source, const __u8 *addr,
+			 __u16 state)
+{
+	struct net_bridge *br = source->br;
+	struct hlist_head *head = &br->hash[br_mac_hash(addr)];
+	struct net_bridge_fdb_entry *fdb;
+
+	fdb = fdb_find(head, addr);
+	if (fdb)
+		return -EEXIST;
+
+	fdb = fdb_create(head, source, addr);
+	if (!fdb)
+		return -ENOMEM;
+
+	if (state & NUD_PERMANENT)
+		fdb->is_local = fdb->is_static = 1;
+	else if (state & NUD_NOARP)
+		fdb->is_static = 1;
+	return 0;
+}
+
+/* Add new permanent fdb entry with RTM_NEWNEIGH */
+int br_fdb_add(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
+{
+	struct net *net = sock_net(skb->sk);
+	struct ndmsg *ndm;
+	struct nlattr *tb[NDA_MAX+1];
+	struct net_device *dev;
+	struct net_bridge_port *p;
+	const __u8 *addr;
+	int err;
+
+	ASSERT_RTNL();
+	err = nlmsg_parse(nlh, sizeof(*ndm), tb, NDA_MAX, NULL);
+	if (err < 0)
+		return err;
+
+	ndm = nlmsg_data(nlh);
+	if (ndm->ndm_ifindex == 0) {
+		pr_info("bridge: RTM_NEWNEIGH with invalid ifindex\n");
+		return -EINVAL;
+	}
+
+	dev = __dev_get_by_index(net, ndm->ndm_ifindex);
+	if (dev == NULL) {
+		pr_info("bridge: RTM_NEWNEIGH with unknown ifindex\n");
+		return -ENODEV;
+	}
+
+	if (!tb[NDA_LLADDR] || nla_len(tb[NDA_LLADDR]) != ETH_ALEN) {
+		pr_info("bridge: RTM_NEWNEIGH with invalid address\n");
+		return -EINVAL;
+	}
+
+	addr = nla_data(tb[NDA_LLADDR]);
+	if (!is_valid_ether_addr(addr)) {
+		pr_info("bridge: RTM_NEWNEIGH with invalid ether address\n");
+		return -EINVAL;
+	}
+
+	p = br_port_get_rtnl(dev);
+	if (p == NULL) {
+		pr_info("bridge: RTM_NEWNEIGH %s not a bridge port\n",
+			dev->name);
+		return -EINVAL;
+	}
+
+	spin_lock_bh(&p->br->hash_lock);
+	err = fdb_add_entry(p, addr, ndm->ndm_state);
+	spin_unlock_bh(&p->br->hash_lock);
+
+	return err;
+}
+
+static int fdb_delete_by_addr(struct net_bridge_port *p, const u8 *addr)
+{
+	struct net_bridge *br = p->br;
+	struct hlist_head *head = &br->hash[br_mac_hash(addr)];
+	struct net_bridge_fdb_entry *fdb;
+
+	fdb = fdb_find(head, addr);
+	if (!fdb)
+		return -ENOENT;
+
+	fdb_delete(fdb);
+	return 0;
+}
+
+/* Remove neighbor entry with RTM_DELNEIGH */
+int br_fdb_delete(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
+{
+	struct net *net = sock_net(skb->sk);
+	struct ndmsg *ndm;
+	struct net_bridge_port *p;
+	struct nlattr *llattr;
+	const __u8 *addr;
+	struct net_device *dev;
+	int err;
+
+	ASSERT_RTNL();
+	if (nlmsg_len(nlh) < sizeof(*ndm))
+		return -EINVAL;
+
+	ndm = nlmsg_data(nlh);
+	if (ndm->ndm_ifindex == 0) {
+		pr_info("bridge: RTM_DELNEIGH with invalid ifindex\n");
+		return -EINVAL;
+	}
+
+	dev = __dev_get_by_index(net, ndm->ndm_ifindex);
+	if (dev == NULL) {
+		pr_info("bridge: RTM_DELNEIGH with unknown ifindex\n");
+		return -ENODEV;
+	}
+
+	llattr = nlmsg_find_attr(nlh, sizeof(*ndm), NDA_LLADDR);
+	if (llattr == NULL || nla_len(llattr) != ETH_ALEN) {
+		pr_info("bridge: RTM_DELNEIGH with invalid address\n");
+		return -EINVAL;
+	}
+
+	addr = nla_data(llattr);
+
+	p = br_port_get_rtnl(dev);
+	if (p == NULL) {
+		pr_info("bridge: RTM_DELNEIGH %s not a bridge port\n",
+			dev->name);
+		return -EINVAL;
+	}
+
+	spin_lock_bh(&p->br->hash_lock);
+	err = fdb_delete_by_addr(p, addr);
+	spin_unlock_bh(&p->br->hash_lock);
+
+	return err;
+}
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 718b60366df..5dbdfdfc3a3 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -36,8 +36,8 @@ static int port_cost(struct net_device *dev)
 	if (dev->ethtool_ops && dev->ethtool_ops->get_settings) {
 		struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET, };
 
-		if (!dev->ethtool_ops->get_settings(dev, &ecmd)) {
-			switch(ecmd.speed) {
+		if (!dev_ethtool_get_settings(dev, &ecmd)) {
+			switch (ethtool_cmd_speed(&ecmd)) {
 			case SPEED_10000:
 				return 2;
 			case SPEED_1000:
@@ -175,56 +175,6 @@ static void del_br(struct net_bridge *br, struct list_head *head)
 	unregister_netdevice_queue(br->dev, head);
 }
 
-static struct net_device *new_bridge_dev(struct net *net, const char *name)
-{
-	struct net_bridge *br;
-	struct net_device *dev;
-
-	dev = alloc_netdev(sizeof(struct net_bridge), name,
-			   br_dev_setup);
-
-	if (!dev)
-		return NULL;
-	dev_net_set(dev, net);
-
-	br = netdev_priv(dev);
-	br->dev = dev;
-
-	br->stats = alloc_percpu(struct br_cpu_netstats);
-	if (!br->stats) {
-		free_netdev(dev);
-		return NULL;
-	}
-
-	spin_lock_init(&br->lock);
-	INIT_LIST_HEAD(&br->port_list);
-	spin_lock_init(&br->hash_lock);
-
-	br->bridge_id.prio[0] = 0x80;
-	br->bridge_id.prio[1] = 0x00;
-
-	memcpy(br->group_addr, br_group_address, ETH_ALEN);
-
-	br->feature_mask = dev->features;
-	br->stp_enabled = BR_NO_STP;
-	br->designated_root = br->bridge_id;
-	br->root_path_cost = 0;
-	br->root_port = 0;
-	br->bridge_max_age = br->max_age = 20 * HZ;
-	br->bridge_hello_time = br->hello_time = 2 * HZ;
-	br->bridge_forward_delay = br->forward_delay = 15 * HZ;
-	br->topology_change = 0;
-	br->topology_change_detected = 0;
-	br->ageing_time = 300 * HZ;
-
-	br_netfilter_rtable_init(br);
-
-	br_stp_timer_init(br);
-	br_multicast_init(br);
-
-	return dev;
-}
-
 /* find an available port number */
 static int find_portno(struct net_bridge *br)
 {
@@ -277,42 +227,19 @@ static struct net_bridge_port *new_nbp(struct net_bridge *br,
 	return p;
 }
 
-static struct device_type br_type = {
-	.name	= "bridge",
-};
-
 int br_add_bridge(struct net *net, const char *name)
 {
 	struct net_device *dev;
-	int ret;
 
-	dev = new_bridge_dev(net, name);
+	dev = alloc_netdev(sizeof(struct net_bridge), name,
+			   br_dev_setup);
+
 	if (!dev)
 		return -ENOMEM;
 
-	rtnl_lock();
-	if (strchr(dev->name, '%')) {
-		ret = dev_alloc_name(dev, dev->name);
-		if (ret < 0)
-			goto out_free;
-	}
-
-	SET_NETDEV_DEVTYPE(dev, &br_type);
-
-	ret = register_netdevice(dev);
-	if (ret)
-		goto out_free;
-
-	ret = br_sysfs_addbr(dev);
-	if (ret)
-		unregister_netdevice(dev);
- out:
-	rtnl_unlock();
-	return ret;
+	dev_net_set(dev, net);
 
-out_free:
-	free_netdev(dev);
-	goto out;
+	return register_netdev(dev);
 }
 
 int br_del_bridge(struct net *net, const char *name)
@@ -364,15 +291,15 @@ int br_min_mtu(const struct net_bridge *br)
 /*
  * Recomputes features using slave's features
  */
-void br_features_recompute(struct net_bridge *br)
+u32 br_features_recompute(struct net_bridge *br, u32 features)
 {
 	struct net_bridge_port *p;
-	u32 features, mask;
+	u32 mask;
 
-	features = mask = br->feature_mask;
 	if (list_empty(&br->port_list))
-		goto done;
+		return features;
 
+	mask = features;
 	features &= ~NETIF_F_ONE_FOR_ALL;
 
 	list_for_each_entry(p, &br->port_list, list) {
@@ -380,8 +307,7 @@ void br_features_recompute(struct net_bridge *br)
 						     p->dev->features, mask);
 	}
 
-done:
-	br->dev->features = netdev_fix_features(br->dev, features);
+	return features;
 }
 
 /* called with RTNL */
@@ -446,9 +372,10 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
 
 	list_add_rcu(&p->list, &br->port_list);
 
+	netdev_update_features(br->dev);
+
 	spin_lock_bh(&br->lock);
 	changed_addr = br_stp_recalculate_bridge_id(br);
-	br_features_recompute(br);
 
 	if ((dev->flags & IFF_UP) && netif_carrier_ok(dev) &&
 	    (br->dev->flags & IFF_UP))
@@ -496,9 +423,10 @@ int br_del_if(struct net_bridge *br, struct net_device *dev)
 
 	spin_lock_bh(&br->lock);
 	br_stp_recalculate_bridge_id(br);
-	br_features_recompute(br);
 	spin_unlock_bh(&br->lock);
 
+	netdev_update_features(br->dev);
+
 	return 0;
 }
 
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index e2160792e1b..f3ac1e858ee 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -98,9 +98,10 @@ int br_handle_frame_finish(struct sk_buff *skb)
 	}
 
 	if (skb) {
-		if (dst)
+		if (dst) {
+			dst->used = jiffies;
 			br_forward(dst->dst, skb, skb2);
-		else
+		} else
 			br_flood_forward(br, skb, skb2);
 	}
 
@@ -164,7 +165,7 @@ rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
 			goto drop;
 
 		/* If STP is turned off, then forward */
-		if (p->br->stp_enabled == BR_NO_STP)
+		if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0)
 			goto forward;
 
 		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
diff --git a/net/bridge/br_ioctl.c b/net/bridge/br_ioctl.c
index cb43312b846..7222fe1d546 100644
--- a/net/bridge/br_ioctl.c
+++ b/net/bridge/br_ioctl.c
@@ -106,7 +106,7 @@ static int add_del_if(struct net_bridge *br, int ifindex, int isadd)
 /*
  * Legacy ioctl's through SIOCDEVPRIVATE
  * This interface is deprecated because it was too difficult to
- * to do the translation for 32/64bit ioctl compatability.
+ * to do the translation for 32/64bit ioctl compatibility.
  */
 static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
@@ -181,40 +181,19 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		spin_lock_bh(&br->lock);
-		br->bridge_forward_delay = clock_t_to_jiffies(args[1]);
-		if (br_is_root_bridge(br))
-			br->forward_delay = br->bridge_forward_delay;
-		spin_unlock_bh(&br->lock);
-		return 0;
+		return br_set_forward_delay(br, args[1]);
 
 	case BRCTL_SET_BRIDGE_HELLO_TIME:
-	{
-		unsigned long t = clock_t_to_jiffies(args[1]);
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if (t < HZ)
-			return -EINVAL;
-
-		spin_lock_bh(&br->lock);
-		br->bridge_hello_time = t;
-		if (br_is_root_bridge(br))
-			br->hello_time = br->bridge_hello_time;
-		spin_unlock_bh(&br->lock);
-		return 0;
-	}
+		return br_set_hello_time(br, args[1]);
 
 	case BRCTL_SET_BRIDGE_MAX_AGE:
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		spin_lock_bh(&br->lock);
-		br->bridge_max_age = clock_t_to_jiffies(args[1]);
-		if (br_is_root_bridge(br))
-			br->max_age = br->bridge_max_age;
-		spin_unlock_bh(&br->lock);
-		return 0;
+		return br_set_max_age(br, args[1]);
 
 	case BRCTL_SET_AGEING_TIME:
 		if (!capable(CAP_NET_ADMIN))
@@ -275,19 +254,16 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	case BRCTL_SET_PORT_PRIORITY:
 	{
 		struct net_bridge_port *p;
-		int ret = 0;
+		int ret;
 
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if (args[2] >= (1<<(16-BR_PORT_BITS)))
-			return -ERANGE;
-
 		spin_lock_bh(&br->lock);
 		if ((p = br_get_port(br, args[1])) == NULL)
 			ret = -EINVAL;
 		else
-			br_stp_set_port_priority(p, args[2]);
+			ret = br_stp_set_port_priority(p, args[2]);
 		spin_unlock_bh(&br->lock);
 		return ret;
 	}
@@ -295,15 +271,17 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	case BRCTL_SET_PATH_COST:
 	{
 		struct net_bridge_port *p;
-		int ret = 0;
+		int ret;
 
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
+		spin_lock_bh(&br->lock);
 		if ((p = br_get_port(br, args[1])) == NULL)
 			ret = -EINVAL;
 		else
-			br_stp_set_path_cost(p, args[2]);
+			ret = br_stp_set_path_cost(p, args[2]);
+		spin_unlock_bh(&br->lock);
 
 		return ret;
 	}
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 59660c909a7..2f14eafdeea 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -413,7 +413,7 @@ out:
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 static struct sk_buff *br_ip6_multicast_alloc_query(struct net_bridge *br,
-						    struct in6_addr *group)
+						    const struct in6_addr *group)
 {
 	struct sk_buff *skb;
 	struct ipv6hdr *ip6h;
@@ -1115,7 +1115,7 @@ static int br_ip4_multicast_query(struct net_bridge *br,
 				  struct net_bridge_port *port,
 				  struct sk_buff *skb)
 {
-	struct iphdr *iph = ip_hdr(skb);
+	const struct iphdr *iph = ip_hdr(skb);
 	struct igmphdr *ih = igmp_hdr(skb);
 	struct net_bridge_mdb_entry *mp;
 	struct igmpv3_query *ih3;
@@ -1190,7 +1190,7 @@ static int br_ip6_multicast_query(struct net_bridge *br,
 				  struct net_bridge_port *port,
 				  struct sk_buff *skb)
 {
-	struct ipv6hdr *ip6h = ipv6_hdr(skb);
+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
 	struct mld_msg *mld = (struct mld_msg *) icmp6_hdr(skb);
 	struct net_bridge_mdb_entry *mp;
 	struct mld2_query *mld2q;
@@ -1198,7 +1198,7 @@ static int br_ip6_multicast_query(struct net_bridge *br,
 	struct net_bridge_port_group __rcu **pp;
 	unsigned long max_delay;
 	unsigned long now = jiffies;
-	struct in6_addr *group = NULL;
+	const struct in6_addr *group = NULL;
 	int err = 0;
 
 	spin_lock(&br->multicast_lock);
@@ -1356,7 +1356,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br,
 				 struct sk_buff *skb)
 {
 	struct sk_buff *skb2 = skb;
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	struct igmphdr *ih;
 	unsigned len;
 	unsigned offset;
@@ -1452,7 +1452,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 				 struct sk_buff *skb)
 {
 	struct sk_buff *skb2;
-	struct ipv6hdr *ip6h;
+	const struct ipv6hdr *ip6h;
 	struct icmp6hdr *icmp6h;
 	u8 nexthdr;
 	unsigned len;
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 008ff6c4eec..e1f5ec75e91 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -219,7 +219,7 @@ static inline void nf_bridge_update_protocol(struct sk_buff *skb)
 static int br_parse_ip_options(struct sk_buff *skb)
 {
 	struct ip_options *opt;
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	struct net_device *dev = skb->dev;
 	u32 len;
 
@@ -249,11 +249,9 @@ static int br_parse_ip_options(struct sk_buff *skb)
 		goto drop;
 	}
 
-	/* Zero out the CB buffer if no options present */
-	if (iph->ihl == 5) {
-		memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
+	memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
+	if (iph->ihl == 5)
 		return 0;
-	}
 
 	opt->optlen = iph->ihl*4 - sizeof(struct iphdr);
 	if (ip_options_compile(dev_net(dev), opt, skb))
@@ -556,7 +554,7 @@ static unsigned int br_nf_pre_routing_ipv6(unsigned int hook,
 					   const struct net_device *out,
 					   int (*okfn)(struct sk_buff *))
 {
-	struct ipv6hdr *hdr;
+	const struct ipv6hdr *hdr;
 	u32 pkt_len;
 
 	if (skb->len < sizeof(struct ipv6hdr))
@@ -739,7 +737,7 @@ static unsigned int br_nf_forward_ip(unsigned int hook, struct sk_buff *skb,
 		nf_bridge->mask |= BRNF_PKT_TYPE;
 	}
 
-	if (br_parse_ip_options(skb))
+	if (pf == PF_INET && br_parse_ip_options(skb))
 		return NF_DROP;
 
 	/* The physdev module checks on this */
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index f8bf4c7f842..ffb0dc4cc0e 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -12,9 +12,11 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/etherdevice.h>
 #include <net/rtnetlink.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
+
 #include "br_private.h"
 
 static inline size_t br_nlmsg_size(void)
@@ -118,8 +120,9 @@ static int br_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 	int idx;
 
 	idx = 0;
-	for_each_netdev(net, dev) {
-		struct net_bridge_port *port = br_port_get_rtnl(dev);
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
+		struct net_bridge_port *port = br_port_get_rcu(dev);
 
 		/* not a bridge port */
 		if (!port || idx < cb->args[0])
@@ -133,7 +136,7 @@ static int br_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 skip:
 		++idx;
 	}
-
+	rcu_read_unlock();
 	cb->args[0] = idx;
 
 	return skb->len;
@@ -188,20 +191,61 @@ static int br_rtm_setlink(struct sk_buff *skb,  struct nlmsghdr *nlh, void *arg)
 	return 0;
 }
 
+static int br_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+	if (tb[IFLA_ADDRESS]) {
+		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+			return -EINVAL;
+		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+			return -EADDRNOTAVAIL;
+	}
+
+	return 0;
+}
+
+static struct rtnl_link_ops br_link_ops __read_mostly = {
+	.kind		= "bridge",
+	.priv_size	= sizeof(struct net_bridge),
+	.setup		= br_dev_setup,
+	.validate	= br_validate,
+};
 
 int __init br_netlink_init(void)
 {
-	if (__rtnl_register(PF_BRIDGE, RTM_GETLINK, NULL, br_dump_ifinfo))
-		return -ENOBUFS;
+	int err;
 
-	/* Only the first call to __rtnl_register can fail */
-	__rtnl_register(PF_BRIDGE, RTM_SETLINK, br_rtm_setlink, NULL);
+	err = rtnl_link_register(&br_link_ops);
+	if (err < 0)
+		goto err1;
+
+	err = __rtnl_register(PF_BRIDGE, RTM_GETLINK, NULL, br_dump_ifinfo);
+	if (err)
+		goto err2;
+	err = __rtnl_register(PF_BRIDGE, RTM_SETLINK, br_rtm_setlink, NULL);
+	if (err)
+		goto err3;
+	err = __rtnl_register(PF_BRIDGE, RTM_NEWNEIGH, br_fdb_add, NULL);
+	if (err)
+		goto err3;
+	err = __rtnl_register(PF_BRIDGE, RTM_DELNEIGH, br_fdb_delete, NULL);
+	if (err)
+		goto err3;
+	err = __rtnl_register(PF_BRIDGE, RTM_GETNEIGH, NULL, br_fdb_dump);
+	if (err)
+		goto err3;
 
 	return 0;
+
+err3:
+	rtnl_unregister_all(PF_BRIDGE);
+err2:
+	rtnl_link_unregister(&br_link_ops);
+err1:
+	return err;
 }
 
 void __exit br_netlink_fini(void)
 {
+	rtnl_link_unregister(&br_link_ops);
 	rtnl_unregister_all(PF_BRIDGE);
 }
-
diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index 7d337c9b608..6545ee9591d 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -36,6 +36,12 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
 	struct net_bridge *br;
 	int err;
 
+	/* register of bridge completed, add sysfs entries */
+	if ((dev->priv_flags & IFF_EBRIDGE) && event == NETDEV_REGISTER) {
+		br_sysfs_addbr(dev);
+		return NOTIFY_DONE;
+	}
+
 	/* not a port of a bridge */
 	p = br_port_get_rtnl(dev);
 	if (!p)
@@ -60,10 +66,7 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
 		break;
 
 	case NETDEV_FEAT_CHANGE:
-		spin_lock_bh(&br->lock);
-		if (netif_running(br->dev))
-			br_features_recompute(br);
-		spin_unlock_bh(&br->lock);
+		netdev_update_features(br->dev);
 		break;
 
 	case NETDEV_DOWN:
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 387013d3374..54578f274d8 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -64,7 +64,8 @@ struct net_bridge_fdb_entry
 	struct net_bridge_port		*dst;
 
 	struct rcu_head			rcu;
-	unsigned long			ageing_timer;
+	unsigned long			updated;
+	unsigned long			used;
 	mac_addr			addr;
 	unsigned char			is_local;
 	unsigned char			is_static;
@@ -182,7 +183,6 @@ struct net_bridge
 	struct br_cpu_netstats __percpu *stats;
 	spinlock_t			hash_lock;
 	struct hlist_head		hash[BR_HASH_SIZE];
-	u32				feature_mask;
 #ifdef CONFIG_BRIDGE_NETFILTER
 	struct rtable 			fake_rtable;
 	bool				nf_call_iptables;
@@ -353,6 +353,9 @@ extern int br_fdb_insert(struct net_bridge *br,
 extern void br_fdb_update(struct net_bridge *br,
 			  struct net_bridge_port *source,
 			  const unsigned char *addr);
+extern int br_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb);
+extern int br_fdb_add(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
+extern int br_fdb_delete(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg);
 
 /* br_forward.c */
 extern void br_deliver(const struct net_bridge_port *to,
@@ -375,7 +378,7 @@ extern int br_add_if(struct net_bridge *br,
 extern int br_del_if(struct net_bridge *br,
 	      struct net_device *dev);
 extern int br_min_mtu(const struct net_bridge *br);
-extern void br_features_recompute(struct net_bridge *br);
+extern u32 br_features_recompute(struct net_bridge *br, u32 features);
 
 /* br_input.c */
 extern int br_handle_frame_finish(struct sk_buff *skb);
@@ -491,6 +494,11 @@ extern struct net_bridge_port *br_get_port(struct net_bridge *br,
 extern void br_init_port(struct net_bridge_port *p);
 extern void br_become_designated_port(struct net_bridge_port *p);
 
+extern int br_set_forward_delay(struct net_bridge *br, unsigned long x);
+extern int br_set_hello_time(struct net_bridge *br, unsigned long x);
+extern int br_set_max_age(struct net_bridge *br, unsigned long x);
+
+
 /* br_stp_if.c */
 extern void br_stp_enable_bridge(struct net_bridge *br);
 extern void br_stp_disable_bridge(struct net_bridge *br);
@@ -501,10 +509,10 @@ extern bool br_stp_recalculate_bridge_id(struct net_bridge *br);
 extern void br_stp_change_bridge_id(struct net_bridge *br, const unsigned char *a);
 extern void br_stp_set_bridge_priority(struct net_bridge *br,
 				       u16 newprio);
-extern void br_stp_set_port_priority(struct net_bridge_port *p,
-				     u8 newprio);
-extern void br_stp_set_path_cost(struct net_bridge_port *p,
-				 u32 path_cost);
+extern int br_stp_set_port_priority(struct net_bridge_port *p,
+				    unsigned long newprio);
+extern int br_stp_set_path_cost(struct net_bridge_port *p,
+				unsigned long path_cost);
 extern ssize_t br_show_bridge_id(char *buf, const struct bridge_id *id);
 
 /* br_stp_bpdu.c */
diff --git a/net/bridge/br_private_stp.h b/net/bridge/br_private_stp.h
index 8b650f7fbfa..642ef47a867 100644
--- a/net/bridge/br_private_stp.h
+++ b/net/bridge/br_private_stp.h
@@ -16,6 +16,19 @@
 #define BPDU_TYPE_CONFIG 0
 #define BPDU_TYPE_TCN 0x80
 
+/* IEEE 802.1D-1998 timer values */
+#define BR_MIN_HELLO_TIME	(1*HZ)
+#define BR_MAX_HELLO_TIME	(10*HZ)
+
+#define BR_MIN_FORWARD_DELAY	(2*HZ)
+#define BR_MAX_FORWARD_DELAY	(30*HZ)
+
+#define BR_MIN_MAX_AGE		(6*HZ)
+#define BR_MAX_MAX_AGE		(40*HZ)
+
+#define BR_MIN_PATH_COST	1
+#define BR_MAX_PATH_COST	65535
+
 struct br_config_bpdu
 {
 	unsigned	topology_change:1;
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 7370d14f634..bb4383e84de 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -484,3 +484,51 @@ void br_received_tcn_bpdu(struct net_bridge_port *p)
 		br_topology_change_acknowledge(p);
 	}
 }
+
+/* Change bridge STP parameter */
+int br_set_hello_time(struct net_bridge *br, unsigned long val)
+{
+	unsigned long t = clock_t_to_jiffies(val);
+
+	if (t < BR_MIN_HELLO_TIME || t > BR_MAX_HELLO_TIME)
+		return -ERANGE;
+
+	spin_lock_bh(&br->lock);
+	br->bridge_hello_time = t;
+	if (br_is_root_bridge(br))
+		br->hello_time = br->bridge_hello_time;
+	spin_unlock_bh(&br->lock);
+	return 0;
+}
+
+int br_set_max_age(struct net_bridge *br, unsigned long val)
+{
+	unsigned long t = clock_t_to_jiffies(val);
+
+	if (t < BR_MIN_MAX_AGE || t > BR_MAX_MAX_AGE)
+		return -ERANGE;
+
+	spin_lock_bh(&br->lock);
+	br->bridge_max_age = t;
+	if (br_is_root_bridge(br))
+		br->max_age = br->bridge_max_age;
+	spin_unlock_bh(&br->lock);
+	return 0;
+
+}
+
+int br_set_forward_delay(struct net_bridge *br, unsigned long val)
+{
+	unsigned long t = clock_t_to_jiffies(val);
+
+	if (br->stp_enabled != BR_NO_STP &&
+	    (t < BR_MIN_FORWARD_DELAY || t > BR_MAX_FORWARD_DELAY))
+		return -ERANGE;
+
+	spin_lock_bh(&br->lock);
+	br->bridge_forward_delay = t;
+	if (br_is_root_bridge(br))
+		br->forward_delay = br->bridge_forward_delay;
+	spin_unlock_bh(&br->lock);
+	return 0;
+}
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index 9b61d09de9b..6f615b8192f 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -20,7 +20,7 @@
 
 
 /* Port id is composed of priority and port number.
- * NB: least significant bits of priority are dropped to
+ * NB: some bits of priority are dropped to
  *     make room for more ports.
  */
 static inline port_id br_make_port_id(__u8 priority, __u16 port_no)
@@ -29,6 +29,8 @@ static inline port_id br_make_port_id(__u8 priority, __u16 port_no)
 		| (port_no & ((1<<BR_PORT_BITS)-1));
 }
 
+#define BR_MAX_PORT_PRIORITY ((u16)~0 >> BR_PORT_BITS)
+
 /* called under bridge lock */
 void br_init_port(struct net_bridge_port *p)
 {
@@ -255,10 +257,14 @@ void br_stp_set_bridge_priority(struct net_bridge *br, u16 newprio)
 }
 
 /* called under bridge lock */
-void br_stp_set_port_priority(struct net_bridge_port *p, u8 newprio)
+int br_stp_set_port_priority(struct net_bridge_port *p, unsigned long newprio)
 {
-	port_id new_port_id = br_make_port_id(newprio, p->port_no);
+	port_id new_port_id;
+
+	if (newprio > BR_MAX_PORT_PRIORITY)
+		return -ERANGE;
 
+	new_port_id = br_make_port_id(newprio, p->port_no);
 	if (br_is_designated_port(p))
 		p->designated_port = new_port_id;
 
@@ -269,14 +275,21 @@ void br_stp_set_port_priority(struct net_bridge_port *p, u8 newprio)
 		br_become_designated_port(p);
 		br_port_state_selection(p->br);
 	}
+
+	return 0;
 }
 
 /* called under bridge lock */
-void br_stp_set_path_cost(struct net_bridge_port *p, u32 path_cost)
+int br_stp_set_path_cost(struct net_bridge_port *p, unsigned long path_cost)
 {
+	if (path_cost < BR_MIN_PATH_COST ||
+	    path_cost > BR_MAX_PATH_COST)
+		return -ERANGE;
+
 	p->path_cost = path_cost;
 	br_configuration_update(p->br);
 	br_port_state_selection(p->br);
+	return 0;
 }
 
 ssize_t br_show_bridge_id(char *buf, const struct bridge_id *id)
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index 5c1e5559ebb..68b893ea8c3 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -43,9 +43,7 @@ static ssize_t store_bridge_parm(struct device *d,
 	if (endp == buf)
 		return -EINVAL;
 
-	spin_lock_bh(&br->lock);
 	err = (*set)(br, val);
-	spin_unlock_bh(&br->lock);
 	return err ? err : len;
 }
 
@@ -57,20 +55,11 @@ static ssize_t show_forward_delay(struct device *d,
 	return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->forward_delay));
 }
 
-static int set_forward_delay(struct net_bridge *br, unsigned long val)
-{
-	unsigned long delay = clock_t_to_jiffies(val);
-	br->forward_delay = delay;
-	if (br_is_root_bridge(br))
-		br->bridge_forward_delay = delay;
-	return 0;
-}
-
 static ssize_t store_forward_delay(struct device *d,
 				   struct device_attribute *attr,
 				   const char *buf, size_t len)
 {
-	return store_bridge_parm(d, buf, len, set_forward_delay);
+	return store_bridge_parm(d, buf, len, br_set_forward_delay);
 }
 static DEVICE_ATTR(forward_delay, S_IRUGO | S_IWUSR,
 		   show_forward_delay, store_forward_delay);
@@ -82,24 +71,11 @@ static ssize_t show_hello_time(struct device *d, struct device_attribute *attr,
 		       jiffies_to_clock_t(to_bridge(d)->hello_time));
 }
 
-static int set_hello_time(struct net_bridge *br, unsigned long val)
-{
-	unsigned long t = clock_t_to_jiffies(val);
-
-	if (t < HZ)
-		return -EINVAL;
-
-	br->hello_time = t;
-	if (br_is_root_bridge(br))
-		br->bridge_hello_time = t;
-	return 0;
-}
-
 static ssize_t store_hello_time(struct device *d,
 				struct device_attribute *attr, const char *buf,
 				size_t len)
 {
-	return store_bridge_parm(d, buf, len, set_hello_time);
+	return store_bridge_parm(d, buf, len, br_set_hello_time);
 }
 static DEVICE_ATTR(hello_time, S_IRUGO | S_IWUSR, show_hello_time,
 		   store_hello_time);
@@ -111,19 +87,10 @@ static ssize_t show_max_age(struct device *d, struct device_attribute *attr,
 		       jiffies_to_clock_t(to_bridge(d)->max_age));
 }
 
-static int set_max_age(struct net_bridge *br, unsigned long val)
-{
-	unsigned long t = clock_t_to_jiffies(val);
-	br->max_age = t;
-	if (br_is_root_bridge(br))
-		br->bridge_max_age = t;
-	return 0;
-}
-
 static ssize_t store_max_age(struct device *d, struct device_attribute *attr,
 			     const char *buf, size_t len)
 {
-	return store_bridge_parm(d, buf, len, set_max_age);
+	return store_bridge_parm(d, buf, len, br_set_max_age);
 }
 static DEVICE_ATTR(max_age, S_IRUGO | S_IWUSR, show_max_age, store_max_age);
 
diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c
index fd5799c9bc8..6229b62749e 100644
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -23,7 +23,7 @@
 struct brport_attribute {
 	struct attribute	attr;
 	ssize_t (*show)(struct net_bridge_port *, char *);
-	ssize_t (*store)(struct net_bridge_port *, unsigned long);
+	int (*store)(struct net_bridge_port *, unsigned long);
 };
 
 #define BRPORT_ATTR(_name,_mode,_show,_store)		        \
@@ -38,27 +38,17 @@ static ssize_t show_path_cost(struct net_bridge_port *p, char *buf)
 {
 	return sprintf(buf, "%d\n", p->path_cost);
 }
-static ssize_t store_path_cost(struct net_bridge_port *p, unsigned long v)
-{
-	br_stp_set_path_cost(p, v);
-	return 0;
-}
+
 static BRPORT_ATTR(path_cost, S_IRUGO | S_IWUSR,
-		   show_path_cost, store_path_cost);
+		   show_path_cost, br_stp_set_path_cost);
 
 static ssize_t show_priority(struct net_bridge_port *p, char *buf)
 {
 	return sprintf(buf, "%d\n", p->priority);
 }
-static ssize_t store_priority(struct net_bridge_port *p, unsigned long v)
-{
-	if (v >= (1<<(16-BR_PORT_BITS)))
-		return -ERANGE;
-	br_stp_set_port_priority(p, v);
-	return 0;
-}
+
 static BRPORT_ATTR(priority, S_IRUGO | S_IWUSR,
-			 show_priority, store_priority);
+			 show_priority, br_stp_set_port_priority);
 
 static ssize_t show_designated_root(struct net_bridge_port *p, char *buf)
 {
@@ -136,7 +126,7 @@ static ssize_t show_hold_timer(struct net_bridge_port *p,
 }
 static BRPORT_ATTR(hold_timer, S_IRUGO, show_hold_timer, NULL);
 
-static ssize_t store_flush(struct net_bridge_port *p, unsigned long v)
+static int store_flush(struct net_bridge_port *p, unsigned long v)
 {
 	br_fdb_delete_by_port(p->br, p, 0); // Don't delete local entry
 	return 0;
@@ -148,7 +138,7 @@ static ssize_t show_hairpin_mode(struct net_bridge_port *p, char *buf)
 	int hairpin_mode = (p->flags & BR_HAIRPIN_MODE) ? 1 : 0;
 	return sprintf(buf, "%d\n", hairpin_mode);
 }
-static ssize_t store_hairpin_mode(struct net_bridge_port *p, unsigned long v)
+static int store_hairpin_mode(struct net_bridge_port *p, unsigned long v)
 {
 	if (v)
 		p->flags |= BR_HAIRPIN_MODE;
@@ -165,7 +155,7 @@ static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
 	return sprintf(buf, "%d\n", p->multicast_router);
 }
 
-static ssize_t store_multicast_router(struct net_bridge_port *p,
+static int store_multicast_router(struct net_bridge_port *p,
 				      unsigned long v)
 {
 	return br_multicast_set_port_router(p, v);
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 893669caa8d..1a92b369c82 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1766,7 +1766,7 @@ static int compat_table_info(const struct ebt_table_info *info,
 
 	newinfo->entries_size = size;
 
-	xt_compat_init_offsets(AF_INET, info->nentries);
+	xt_compat_init_offsets(NFPROTO_BRIDGE, info->nentries);
 	return EBT_ENTRY_ITERATE(entries, size, compat_calc_entry, info,
 							entries, newinfo);
 }
@@ -1882,7 +1882,7 @@ static int compat_mtw_from_user(struct compat_ebt_entry_mwt *mwt,
 	struct xt_match *match;
 	struct xt_target *wt;
 	void *dst = NULL;
-	int off, pad = 0, ret = 0;
+	int off, pad = 0;
 	unsigned int size_kern, entry_offset, match_size = mwt->match_size;
 
 	strlcpy(name, mwt->u.name, sizeof(name));
@@ -1935,13 +1935,6 @@ static int compat_mtw_from_user(struct compat_ebt_entry_mwt *mwt,
 		break;
 	}
 
-	if (!dst) {
-		ret = xt_compat_add_offset(NFPROTO_BRIDGE, entry_offset,
-					off + ebt_compat_entry_padsize());
-		if (ret < 0)
-			return ret;
-	}
-
 	state->buf_kern_offset += match_size + off;
 	state->buf_user_offset += match_size;
 	pad = XT_ALIGN(size_kern) - size_kern;
@@ -2016,50 +2009,6 @@ static int ebt_size_mwt(struct compat_ebt_entry_mwt *match32,
 	return growth;
 }
 
-#define EBT_COMPAT_WATCHER_ITERATE(e, fn, args...)          \
-({                                                          \
-	unsigned int __i;                                   \
-	int __ret = 0;                                      \
-	struct compat_ebt_entry_mwt *__watcher;             \
-	                                                    \
-	for (__i = e->watchers_offset;                      \
-	     __i < (e)->target_offset;                      \
-	     __i += __watcher->watcher_size +               \
-	     sizeof(struct compat_ebt_entry_mwt)) {         \
-		__watcher = (void *)(e) + __i;              \
-		__ret = fn(__watcher , ## args);            \
-		if (__ret != 0)                             \
-			break;                              \
-	}                                                   \
-	if (__ret == 0) {                                   \
-		if (__i != (e)->target_offset)              \
-			__ret = -EINVAL;                    \
-	}                                                   \
-	__ret;                                              \
-})
-
-#define EBT_COMPAT_MATCH_ITERATE(e, fn, args...)            \
-({                                                          \
-	unsigned int __i;                                   \
-	int __ret = 0;                                      \
-	struct compat_ebt_entry_mwt *__match;               \
-	                                                    \
-	for (__i = sizeof(struct ebt_entry);                \
-	     __i < (e)->watchers_offset;                    \
-	     __i += __match->match_size +                   \
-	     sizeof(struct compat_ebt_entry_mwt)) {         \
-		__match = (void *)(e) + __i;                \
-		__ret = fn(__match , ## args);              \
-		if (__ret != 0)                             \
-			break;                              \
-	}                                                   \
-	if (__ret == 0) {                                   \
-		if (__i != (e)->watchers_offset)            \
-			__ret = -EINVAL;                    \
-	}                                                   \
-	__ret;                                              \
-})
-
 /* called for all ebt_entry structures. */
 static int size_entry_mwt(struct ebt_entry *entry, const unsigned char *base,
 			  unsigned int *total,
@@ -2132,6 +2081,14 @@ static int size_entry_mwt(struct ebt_entry *entry, const unsigned char *base,
 		}
 	}
 
+	if (state->buf_kern_start == NULL) {
+		unsigned int offset = buf_start - (char *) base;
+
+		ret = xt_compat_add_offset(NFPROTO_BRIDGE, offset, new_offset);
+		if (ret < 0)
+			return ret;
+	}
+
 	startoff = state->buf_user_offset - startoff;
 
 	BUG_ON(*total < startoff);
@@ -2240,6 +2197,7 @@ static int compat_do_replace(struct net *net, void __user *user,
 
 	xt_compat_lock(NFPROTO_BRIDGE);
 
+	xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries);
 	ret = compat_copy_entries(entries_tmp, tmp.entries_size, &state);
 	if (ret < 0)
 		goto out_unlock;
diff --git a/net/caif/Makefile b/net/caif/Makefile
index 9d38e406e4a..ebcd4e7e6f4 100644
--- a/net/caif/Makefile
+++ b/net/caif/Makefile
@@ -5,7 +5,7 @@ caif-y := caif_dev.o \
 	cffrml.o cfveil.o cfdbgl.o\
 	cfserl.o cfdgml.o  \
 	cfrfml.o cfvidl.o cfutill.o \
-	cfsrvl.o cfpkt_skbuff.o caif_config_util.o
+	cfsrvl.o cfpkt_skbuff.o
 
 obj-$(CONFIG_CAIF) += caif.o
 obj-$(CONFIG_CAIF_NETDEV) += chnl_net.o
diff --git a/net/caif/caif_config_util.c b/net/caif/caif_config_util.c
deleted file mode 100644
index d522d8c1703..00000000000
--- a/net/caif/caif_config_util.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson AB 2010
- * Author:	Sjur Brendeland sjur.brandeland@stericsson.com
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <net/caif/cfctrl.h>
-#include <net/caif/cfcnfg.h>
-#include <net/caif/caif_dev.h>
-
-int connect_req_to_link_param(struct cfcnfg *cnfg,
-				struct caif_connect_request *s,
-				struct cfctrl_link_param *l)
-{
-	struct dev_info *dev_info;
-	enum cfcnfg_phy_preference pref;
-	int res;
-
-	memset(l, 0, sizeof(*l));
-	/* In caif protocol low value is high priority */
-	l->priority = CAIF_PRIO_MAX - s->priority + 1;
-
-	if (s->ifindex != 0){
-		res = cfcnfg_get_id_from_ifi(cnfg, s->ifindex);
-		if (res < 0)
-			return res;
-		l->phyid = res;
-	}
-	else {
-		switch (s->link_selector) {
-		case CAIF_LINK_HIGH_BANDW:
-			pref = CFPHYPREF_HIGH_BW;
-			break;
-		case CAIF_LINK_LOW_LATENCY:
-			pref = CFPHYPREF_LOW_LAT;
-			break;
-		default:
-			return -EINVAL;
-		}
-		dev_info = cfcnfg_get_phyid(cnfg, pref);
-		if (dev_info == NULL)
-			return -ENODEV;
-		l->phyid = dev_info->id;
-	}
-	switch (s->protocol) {
-	case CAIFPROTO_AT:
-		l->linktype = CFCTRL_SRV_VEI;
-		if (s->sockaddr.u.at.type == CAIF_ATTYPE_PLAIN)
-			l->chtype = 0x02;
-		else
-			l->chtype = s->sockaddr.u.at.type;
-		l->endpoint = 0x00;
-		break;
-	case CAIFPROTO_DATAGRAM:
-		l->linktype = CFCTRL_SRV_DATAGRAM;
-		l->chtype = 0x00;
-		l->u.datagram.connid = s->sockaddr.u.dgm.connection_id;
-		break;
-	case CAIFPROTO_DATAGRAM_LOOP:
-		l->linktype = CFCTRL_SRV_DATAGRAM;
-		l->chtype = 0x03;
-		l->endpoint = 0x00;
-		l->u.datagram.connid = s->sockaddr.u.dgm.connection_id;
-		break;
-	case CAIFPROTO_RFM:
-		l->linktype = CFCTRL_SRV_RFM;
-		l->u.datagram.connid = s->sockaddr.u.rfm.connection_id;
-		strncpy(l->u.rfm.volume, s->sockaddr.u.rfm.volume,
-			sizeof(l->u.rfm.volume)-1);
-		l->u.rfm.volume[sizeof(l->u.rfm.volume)-1] = 0;
-		break;
-	case CAIFPROTO_UTIL:
-		l->linktype = CFCTRL_SRV_UTIL;
-		l->endpoint = 0x00;
-		l->chtype = 0x00;
-		strncpy(l->u.utility.name, s->sockaddr.u.util.service,
-			sizeof(l->u.utility.name)-1);
-		l->u.utility.name[sizeof(l->u.utility.name)-1] = 0;
-		caif_assert(sizeof(l->u.utility.name) > 10);
-		l->u.utility.paramlen = s->param.size;
-		if (l->u.utility.paramlen > sizeof(l->u.utility.params))
-			l->u.utility.paramlen = sizeof(l->u.utility.params);
-
-		memcpy(l->u.utility.params, s->param.data,
-		       l->u.utility.paramlen);
-
-		break;
-	case CAIFPROTO_DEBUG:
-		l->linktype = CFCTRL_SRV_DBG;
-		l->endpoint = s->sockaddr.u.dbg.service;
-		l->chtype = s->sockaddr.u.dbg.type;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index a42a408306e..366ca0fb7a2 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -12,49 +12,51 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__
 
 #include <linux/version.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/if_arp.h>
 #include <linux/net.h>
 #include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
+#include <linux/mutex.h>
 #include <net/netns/generic.h>
 #include <net/net_namespace.h>
 #include <net/pkt_sched.h>
 #include <net/caif/caif_device.h>
-#include <net/caif/caif_dev.h>
 #include <net/caif/caif_layer.h>
 #include <net/caif/cfpkt.h>
 #include <net/caif/cfcnfg.h>
 
 MODULE_LICENSE("GPL");
-#define TIMEOUT (HZ*5)
 
 /* Used for local tracking of the CAIF net devices */
 struct caif_device_entry {
 	struct cflayer layer;
 	struct list_head list;
-	atomic_t in_use;
-	atomic_t state;
-	u16 phyid;
 	struct net_device *netdev;
-	wait_queue_head_t event;
+	int __percpu *pcpu_refcnt;
 };
 
 struct caif_device_entry_list {
 	struct list_head list;
 	/* Protects simulanous deletes in list */
-	spinlock_t lock;
+	struct mutex lock;
 };
 
 struct caif_net {
+	struct cfcnfg *cfg;
 	struct caif_device_entry_list caifdevs;
 };
 
 static int caif_net_id;
-static struct cfcnfg *cfg;
+
+struct cfcnfg *get_cfcnfg(struct net *net)
+{
+	struct caif_net *caifn;
+	BUG_ON(!net);
+	caifn = net_generic(net, caif_net_id);
+	BUG_ON(!caifn);
+	return caifn->cfg;
+}
+EXPORT_SYMBOL(get_cfcnfg);
 
 static struct caif_device_entry_list *caif_device_list(struct net *net)
 {
@@ -65,19 +67,39 @@ static struct caif_device_entry_list *caif_device_list(struct net *net)
 	return &caifn->caifdevs;
 }
 
+static void caifd_put(struct caif_device_entry *e)
+{
+	irqsafe_cpu_dec(*e->pcpu_refcnt);
+}
+
+static void caifd_hold(struct caif_device_entry *e)
+{
+	irqsafe_cpu_inc(*e->pcpu_refcnt);
+}
+
+static int caifd_refcnt_read(struct caif_device_entry *e)
+{
+	int i, refcnt = 0;
+	for_each_possible_cpu(i)
+		refcnt += *per_cpu_ptr(e->pcpu_refcnt, i);
+	return refcnt;
+}
+
 /* Allocate new CAIF device. */
 static struct caif_device_entry *caif_device_alloc(struct net_device *dev)
 {
 	struct caif_device_entry_list *caifdevs;
 	struct caif_device_entry *caifd;
+
 	caifdevs = caif_device_list(dev_net(dev));
 	BUG_ON(!caifdevs);
+
 	caifd = kzalloc(sizeof(*caifd), GFP_ATOMIC);
 	if (!caifd)
 		return NULL;
+	caifd->pcpu_refcnt = alloc_percpu(int);
 	caifd->netdev = dev;
-	list_add(&caifd->list, &caifdevs->list);
-	init_waitqueue_head(&caifd->event);
+	dev_hold(dev);
 	return caifd;
 }
 
@@ -87,98 +109,60 @@ static struct caif_device_entry *caif_get(struct net_device *dev)
 	    caif_device_list(dev_net(dev));
 	struct caif_device_entry *caifd;
 	BUG_ON(!caifdevs);
-	list_for_each_entry(caifd, &caifdevs->list, list) {
+	list_for_each_entry_rcu(caifd, &caifdevs->list, list) {
 		if (caifd->netdev == dev)
 			return caifd;
 	}
 	return NULL;
 }
 
-static void caif_device_destroy(struct net_device *dev)
-{
-	struct caif_device_entry_list *caifdevs =
-	    caif_device_list(dev_net(dev));
-	struct caif_device_entry *caifd;
-	ASSERT_RTNL();
-	if (dev->type != ARPHRD_CAIF)
-		return;
-
-	spin_lock_bh(&caifdevs->lock);
-	caifd = caif_get(dev);
-	if (caifd == NULL) {
-		spin_unlock_bh(&caifdevs->lock);
-		return;
-	}
-
-	list_del(&caifd->list);
-	spin_unlock_bh(&caifdevs->lock);
-
-	kfree(caifd);
-}
-
 static int transmit(struct cflayer *layer, struct cfpkt *pkt)
 {
+	int err;
 	struct caif_device_entry *caifd =
 	    container_of(layer, struct caif_device_entry, layer);
-	struct sk_buff *skb, *skb2;
-	int ret = -EINVAL;
+	struct sk_buff *skb;
+
 	skb = cfpkt_tonative(pkt);
 	skb->dev = caifd->netdev;
-	/*
-	 * Don't allow SKB to be destroyed upon error, but signal resend
-	 * notification to clients. We can't rely on the return value as
-	 * congestion (NET_XMIT_CN) sometimes drops the packet, sometimes don't.
-	 */
-	if (netif_queue_stopped(caifd->netdev))
-		return -EAGAIN;
-	skb2 = skb_get(skb);
-
-	ret = dev_queue_xmit(skb2);
-
-	if (!ret)
-		kfree_skb(skb);
-	else
-		return -EAGAIN;
 
-	return 0;
-}
+	err = dev_queue_xmit(skb);
+	if (err > 0)
+		err = -EIO;
 
-static int modemcmd(struct cflayer *layr, enum caif_modemcmd ctrl)
-{
-	struct caif_device_entry *caifd;
-	struct caif_dev_common *caifdev;
-	caifd = container_of(layr, struct caif_device_entry, layer);
-	caifdev = netdev_priv(caifd->netdev);
-	if (ctrl == _CAIF_MODEMCMD_PHYIF_USEFULL) {
-		atomic_set(&caifd->in_use, 1);
-		wake_up_interruptible(&caifd->event);
-
-	} else if (ctrl == _CAIF_MODEMCMD_PHYIF_USELESS) {
-		atomic_set(&caifd->in_use, 0);
-		wake_up_interruptible(&caifd->event);
-	}
-	return 0;
+	return err;
 }
 
 /*
- * Stuff received packets to associated sockets.
+ * Stuff received packets into the CAIF stack.
  * On error, returns non-zero and releases the skb.
  */
 static int receive(struct sk_buff *skb, struct net_device *dev,
 		   struct packet_type *pkttype, struct net_device *orig_dev)
 {
-	struct net *net;
 	struct cfpkt *pkt;
 	struct caif_device_entry *caifd;
-	net = dev_net(dev);
+
 	pkt = cfpkt_fromnative(CAIF_DIR_IN, skb);
+
+	rcu_read_lock();
 	caifd = caif_get(dev);
-	if (!caifd || !caifd->layer.up || !caifd->layer.up->receive)
-		return NET_RX_DROP;
 
-	if (caifd->layer.up->receive(caifd->layer.up, pkt))
+	if (!caifd || !caifd->layer.up || !caifd->layer.up->receive ||
+			!netif_oper_up(caifd->netdev)) {
+		rcu_read_unlock();
+		kfree_skb(skb);
 		return NET_RX_DROP;
+	}
+
+	/* Hold reference to netdevice while using CAIF stack */
+	caifd_hold(caifd);
+	rcu_read_unlock();
+
+	caifd->layer.up->receive(caifd->layer.up, pkt);
 
+	/* Release reference to stack upwards */
+	caifd_put(caifd);
 	return 0;
 }
 
@@ -189,15 +173,25 @@ static struct packet_type caif_packet_type __read_mostly = {
 
 static void dev_flowctrl(struct net_device *dev, int on)
 {
-	struct caif_device_entry *caifd = caif_get(dev);
-	if (!caifd || !caifd->layer.up || !caifd->layer.up->ctrlcmd)
+	struct caif_device_entry *caifd;
+
+	rcu_read_lock();
+
+	caifd = caif_get(dev);
+	if (!caifd || !caifd->layer.up || !caifd->layer.up->ctrlcmd) {
+		rcu_read_unlock();
 		return;
+	}
+
+	caifd_hold(caifd);
+	rcu_read_unlock();
 
 	caifd->layer.up->ctrlcmd(caifd->layer.up,
 				 on ?
 				 _CAIF_CTRLCMD_PHYIF_FLOW_ON_IND :
 				 _CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND,
 				 caifd->layer.id);
+	caifd_put(caifd);
 }
 
 /* notify Caif of device events */
@@ -208,37 +202,28 @@ static int caif_device_notify(struct notifier_block *me, unsigned long what,
 	struct caif_device_entry *caifd = NULL;
 	struct caif_dev_common *caifdev;
 	enum cfcnfg_phy_preference pref;
-	int res = -EINVAL;
 	enum cfcnfg_phy_type phy_type;
+	struct cfcnfg *cfg;
+	struct caif_device_entry_list *caifdevs =
+	    caif_device_list(dev_net(dev));
 
 	if (dev->type != ARPHRD_CAIF)
 		return 0;
 
+	cfg = get_cfcnfg(dev_net(dev));
+	if (cfg == NULL)
+		return 0;
+
 	switch (what) {
 	case NETDEV_REGISTER:
-		netdev_info(dev, "register\n");
 		caifd = caif_device_alloc(dev);
-		if (caifd == NULL)
-			break;
+		if (!caifd)
+			return 0;
+
 		caifdev = netdev_priv(dev);
 		caifdev->flowctrl = dev_flowctrl;
-		atomic_set(&caifd->state, what);
-		res = 0;
-		break;
 
-	case NETDEV_UP:
-		netdev_info(dev, "up\n");
-		caifd = caif_get(dev);
-		if (caifd == NULL)
-			break;
-		caifdev = netdev_priv(dev);
-		if (atomic_read(&caifd->state) == NETDEV_UP) {
-			netdev_info(dev, "already up\n");
-			break;
-		}
-		atomic_set(&caifd->state, what);
 		caifd->layer.transmit = transmit;
-		caifd->layer.modemcmd = modemcmd;
 
 		if (caifdev->use_frag)
 			phy_type = CFPHYTYPE_FRAG;
@@ -256,62 +241,94 @@ static int caif_device_notify(struct notifier_block *me, unsigned long what,
 			pref = CFPHYPREF_HIGH_BW;
 			break;
 		}
-		dev_hold(dev);
-		cfcnfg_add_phy_layer(get_caif_conf(),
+		strncpy(caifd->layer.name, dev->name,
+			sizeof(caifd->layer.name) - 1);
+		caifd->layer.name[sizeof(caifd->layer.name) - 1] = 0;
+
+		mutex_lock(&caifdevs->lock);
+		list_add_rcu(&caifd->list, &caifdevs->list);
+
+		cfcnfg_add_phy_layer(cfg,
 				     phy_type,
 				     dev,
 				     &caifd->layer,
-				     &caifd->phyid,
 				     pref,
 				     caifdev->use_fcs,
 				     caifdev->use_stx);
-		strncpy(caifd->layer.name, dev->name,
-			sizeof(caifd->layer.name) - 1);
-		caifd->layer.name[sizeof(caifd->layer.name) - 1] = 0;
+		mutex_unlock(&caifdevs->lock);
 		break;
 
-	case NETDEV_GOING_DOWN:
+	case NETDEV_UP:
+		rcu_read_lock();
+
 		caifd = caif_get(dev);
-		if (caifd == NULL)
+		if (caifd == NULL) {
+			rcu_read_unlock();
 			break;
-		netdev_info(dev, "going down\n");
+		}
 
-		if (atomic_read(&caifd->state) == NETDEV_GOING_DOWN ||
-			atomic_read(&caifd->state) == NETDEV_DOWN)
-			break;
+		cfcnfg_set_phy_state(cfg, &caifd->layer, true);
+		rcu_read_unlock();
 
-		atomic_set(&caifd->state, what);
-		if (!caifd || !caifd->layer.up || !caifd->layer.up->ctrlcmd)
-			return -EINVAL;
-		caifd->layer.up->ctrlcmd(caifd->layer.up,
-					 _CAIF_CTRLCMD_PHYIF_DOWN_IND,
-					 caifd->layer.id);
-		might_sleep();
-		res = wait_event_interruptible_timeout(caifd->event,
-					atomic_read(&caifd->in_use) == 0,
-					TIMEOUT);
 		break;
 
 	case NETDEV_DOWN:
+		rcu_read_lock();
+
 		caifd = caif_get(dev);
-		if (caifd == NULL)
-			break;
-		netdev_info(dev, "down\n");
-		if (atomic_read(&caifd->in_use))
-			netdev_warn(dev,
-				    "Unregistering an active CAIF device\n");
-		cfcnfg_del_phy_layer(get_caif_conf(), &caifd->layer);
-		dev_put(dev);
-		atomic_set(&caifd->state, what);
+		if (!caifd || !caifd->layer.up || !caifd->layer.up->ctrlcmd) {
+			rcu_read_unlock();
+			return -EINVAL;
+		}
+
+		cfcnfg_set_phy_state(cfg, &caifd->layer, false);
+		caifd_hold(caifd);
+		rcu_read_unlock();
+
+		caifd->layer.up->ctrlcmd(caifd->layer.up,
+					 _CAIF_CTRLCMD_PHYIF_DOWN_IND,
+					 caifd->layer.id);
+		caifd_put(caifd);
 		break;
 
 	case NETDEV_UNREGISTER:
+		mutex_lock(&caifdevs->lock);
+
 		caifd = caif_get(dev);
-		if (caifd == NULL)
+		if (caifd == NULL) {
+			mutex_unlock(&caifdevs->lock);
+			break;
+		}
+		list_del_rcu(&caifd->list);
+
+		/*
+		 * NETDEV_UNREGISTER is called repeatedly until all reference
+		 * counts for the net-device are released. If references to
+		 * caifd is taken, simply ignore NETDEV_UNREGISTER and wait for
+		 * the next call to NETDEV_UNREGISTER.
+		 *
+		 * If any packets are in flight down the CAIF Stack,
+		 * cfcnfg_del_phy_layer will return nonzero.
+		 * If no packets are in flight, the CAIF Stack associated
+		 * with the net-device un-registering is freed.
+		 */
+
+		if (caifd_refcnt_read(caifd) != 0 ||
+			cfcnfg_del_phy_layer(cfg, &caifd->layer) != 0) {
+
+			pr_info("Wait for device inuse\n");
+			/* Enrole device if CAIF Stack is still in use */
+			list_add_rcu(&caifd->list, &caifdevs->list);
+			mutex_unlock(&caifdevs->lock);
 			break;
-		netdev_info(dev, "unregister\n");
-		atomic_set(&caifd->state, what);
-		caif_device_destroy(dev);
+		}
+
+		synchronize_rcu();
+		dev_put(caifd->netdev);
+		free_percpu(caifd->pcpu_refcnt);
+		kfree(caifd);
+
+		mutex_unlock(&caifdevs->lock);
 		break;
 	}
 	return 0;
@@ -322,61 +339,60 @@ static struct notifier_block caif_device_notifier = {
 	.priority = 0,
 };
 
-
-struct cfcnfg *get_caif_conf(void)
-{
-	return cfg;
-}
-EXPORT_SYMBOL(get_caif_conf);
-
-int caif_connect_client(struct caif_connect_request *conn_req,
-			struct cflayer *client_layer, int *ifindex,
-			int *headroom, int *tailroom)
-{
-	struct cfctrl_link_param param;
-	int ret;
-	ret = connect_req_to_link_param(get_caif_conf(), conn_req, &param);
-	if (ret)
-		return ret;
-	/* Hook up the adaptation layer. */
-	return cfcnfg_add_adaptation_layer(get_caif_conf(), &param,
-					client_layer, ifindex,
-					headroom, tailroom);
-}
-EXPORT_SYMBOL(caif_connect_client);
-
-int caif_disconnect_client(struct cflayer *adap_layer)
-{
-       return cfcnfg_disconn_adapt_layer(get_caif_conf(), adap_layer);
-}
-EXPORT_SYMBOL(caif_disconnect_client);
-
-void caif_release_client(struct cflayer *adap_layer)
-{
-       cfcnfg_release_adap_layer(adap_layer);
-}
-EXPORT_SYMBOL(caif_release_client);
-
 /* Per-namespace Caif devices handling */
 static int caif_init_net(struct net *net)
 {
 	struct caif_net *caifn = net_generic(net, caif_net_id);
+	BUG_ON(!caifn);
 	INIT_LIST_HEAD(&caifn->caifdevs.list);
-	spin_lock_init(&caifn->caifdevs.lock);
+	mutex_init(&caifn->caifdevs.lock);
+
+	caifn->cfg = cfcnfg_create();
+	if (!caifn->cfg) {
+		pr_warn("can't create cfcnfg\n");
+		return -ENOMEM;
+	}
+
 	return 0;
 }
 
 static void caif_exit_net(struct net *net)
 {
-	struct net_device *dev;
-	int res;
+	struct caif_device_entry *caifd, *tmp;
+	struct caif_device_entry_list *caifdevs =
+	    caif_device_list(net);
+	struct cfcnfg *cfg;
+
 	rtnl_lock();
-	for_each_netdev(net, dev) {
-		if (dev->type != ARPHRD_CAIF)
-			continue;
-		res = dev_close(dev);
-		caif_device_destroy(dev);
+	mutex_lock(&caifdevs->lock);
+
+	cfg = get_cfcnfg(net);
+	if (cfg == NULL) {
+		mutex_unlock(&caifdevs->lock);
+		return;
 	}
+
+	list_for_each_entry_safe(caifd, tmp, &caifdevs->list, list) {
+		int i = 0;
+		list_del_rcu(&caifd->list);
+		cfcnfg_set_phy_state(cfg, &caifd->layer, false);
+
+		while (i < 10 &&
+			(caifd_refcnt_read(caifd) != 0 ||
+			cfcnfg_del_phy_layer(cfg, &caifd->layer) != 0)) {
+
+			pr_info("Wait for device inuse\n");
+			msleep(250);
+			i++;
+		}
+		synchronize_rcu();
+		dev_put(caifd->netdev);
+		free_percpu(caifd->pcpu_refcnt);
+		kfree(caifd);
+	}
+	cfcnfg_remove(cfg);
+
+	mutex_unlock(&caifdevs->lock);
 	rtnl_unlock();
 }
 
@@ -391,32 +407,23 @@ static struct pernet_operations caif_net_ops = {
 static int __init caif_device_init(void)
 {
 	int result;
-	cfg = cfcnfg_create();
-	if (!cfg) {
-		pr_warn("can't create cfcnfg\n");
-		goto err_cfcnfg_create_failed;
-	}
+
 	result = register_pernet_device(&caif_net_ops);
 
-	if (result) {
-		kfree(cfg);
-		cfg = NULL;
+	if (result)
 		return result;
-	}
-	dev_add_pack(&caif_packet_type);
+
 	register_netdevice_notifier(&caif_device_notifier);
+	dev_add_pack(&caif_packet_type);
 
 	return result;
-err_cfcnfg_create_failed:
-	return -ENODEV;
 }
 
 static void __exit caif_device_exit(void)
 {
-	dev_remove_pack(&caif_packet_type);
 	unregister_pernet_device(&caif_net_ops);
 	unregister_netdevice_notifier(&caif_device_notifier);
-	cfcnfg_remove(cfg);
+	dev_remove_pack(&caif_packet_type);
 }
 
 module_init(caif_device_init);
diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index 8184c031d02..b840395ced1 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -48,6 +48,7 @@ static struct dentry *debugfsdir;
 #ifdef CONFIG_DEBUG_FS
 struct debug_fs_counter {
 	atomic_t caif_nr_socks;
+	atomic_t caif_sock_create;
 	atomic_t num_connect_req;
 	atomic_t num_connect_resp;
 	atomic_t num_connect_fail_resp;
@@ -59,11 +60,11 @@ struct debug_fs_counter {
 	atomic_t num_rx_flow_on;
 };
 static struct debug_fs_counter cnt;
-#define	dbfs_atomic_inc(v) atomic_inc(v)
-#define	dbfs_atomic_dec(v) atomic_dec(v)
+#define	dbfs_atomic_inc(v) atomic_inc_return(v)
+#define	dbfs_atomic_dec(v) atomic_dec_return(v)
 #else
-#define	dbfs_atomic_inc(v)
-#define	dbfs_atomic_dec(v)
+#define	dbfs_atomic_inc(v) 0
+#define	dbfs_atomic_dec(v) 0
 #endif
 
 struct caifsock {
@@ -155,9 +156,10 @@ static int caif_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
 
 	if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
 		(unsigned)sk->sk_rcvbuf && rx_flow_is_on(cf_sk)) {
-		pr_debug("sending flow OFF (queue len = %d %d)\n",
-			atomic_read(&cf_sk->sk.sk_rmem_alloc),
-			sk_rcvbuf_lowwater(cf_sk));
+		if (net_ratelimit())
+			pr_debug("sending flow OFF (queue len = %d %d)\n",
+					atomic_read(&cf_sk->sk.sk_rmem_alloc),
+					sk_rcvbuf_lowwater(cf_sk));
 		set_rx_flow_off(cf_sk);
 		dbfs_atomic_inc(&cnt.num_rx_flow_off);
 		caif_flow_ctrl(sk, CAIF_MODEMCMD_FLOW_OFF_REQ);
@@ -168,7 +170,8 @@ static int caif_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
 		return err;
 	if (!sk_rmem_schedule(sk, skb->truesize) && rx_flow_is_on(cf_sk)) {
 		set_rx_flow_off(cf_sk);
-		pr_debug("sending flow OFF due to rmem_schedule\n");
+		if (net_ratelimit())
+			pr_debug("sending flow OFF due to rmem_schedule\n");
 		dbfs_atomic_inc(&cnt.num_rx_flow_off);
 		caif_flow_ctrl(sk, CAIF_MODEMCMD_FLOW_OFF_REQ);
 	}
@@ -202,13 +205,25 @@ static int caif_sktrecv_cb(struct cflayer *layr, struct cfpkt *pkt)
 	skb = cfpkt_tonative(pkt);
 
 	if (unlikely(cf_sk->sk.sk_state != CAIF_CONNECTED)) {
-		cfpkt_destroy(pkt);
+		kfree_skb(skb);
 		return 0;
 	}
 	caif_queue_rcv_skb(&cf_sk->sk, skb);
 	return 0;
 }
 
+static void cfsk_hold(struct cflayer *layr)
+{
+	struct caifsock *cf_sk = container_of(layr, struct caifsock, layer);
+	sock_hold(&cf_sk->sk);
+}
+
+static void cfsk_put(struct cflayer *layr)
+{
+	struct caifsock *cf_sk = container_of(layr, struct caifsock, layer);
+	sock_put(&cf_sk->sk);
+}
+
 /* Packet Control Callback function called from CAIF */
 static void caif_ctrl_cb(struct cflayer *layr,
 				enum caif_ctrlcmd flow,
@@ -232,6 +247,8 @@ static void caif_ctrl_cb(struct cflayer *layr,
 
 	case CAIF_CTRLCMD_INIT_RSP:
 		/* We're now connected */
+		caif_client_register_refcnt(&cf_sk->layer,
+						cfsk_hold, cfsk_put);
 		dbfs_atomic_inc(&cnt.num_connect_resp);
 		cf_sk->sk.sk_state = CAIF_CONNECTED;
 		set_tx_flow_on(cf_sk);
@@ -242,7 +259,6 @@ static void caif_ctrl_cb(struct cflayer *layr,
 		/* We're now disconnected */
 		cf_sk->sk.sk_state = CAIF_DISCONNECTED;
 		cf_sk->sk.sk_state_change(&cf_sk->sk);
-		cfcnfg_release_adap_layer(&cf_sk->layer);
 		break;
 
 	case CAIF_CTRLCMD_INIT_FAIL_RSP:
@@ -519,43 +535,14 @@ static int transmit_skb(struct sk_buff *skb, struct caifsock *cf_sk,
 			int noblock, long timeo)
 {
 	struct cfpkt *pkt;
-	int ret, loopcnt = 0;
 
 	pkt = cfpkt_fromnative(CAIF_DIR_OUT, skb);
-	memset(cfpkt_info(pkt), 0, sizeof(struct caif_payload_info));
-	do {
+	memset(skb->cb, 0, sizeof(struct caif_payload_info));
 
-		ret = -ETIMEDOUT;
+	if (cf_sk->layer.dn == NULL)
+		return -EINVAL;
 
-		/* Slight paranoia, probably not needed. */
-		if (unlikely(loopcnt++ > 1000)) {
-			pr_warn("transmit retries failed, error = %d\n", ret);
-			break;
-		}
-
-		if (cf_sk->layer.dn != NULL)
-			ret = cf_sk->layer.dn->transmit(cf_sk->layer.dn, pkt);
-		if (likely(ret >= 0))
-			break;
-		/* if transmit return -EAGAIN, then retry */
-		if (noblock && ret == -EAGAIN)
-			break;
-		timeo = caif_wait_for_flow_on(cf_sk, 0, timeo, &ret);
-		if (signal_pending(current)) {
-			ret = sock_intr_errno(timeo);
-			break;
-		}
-		if (ret)
-			break;
-		if (cf_sk->sk.sk_state != CAIF_CONNECTED ||
-			sock_flag(&cf_sk->sk, SOCK_DEAD) ||
-			(cf_sk->sk.sk_shutdown & RCV_SHUTDOWN)) {
-			ret = -EPIPE;
-			cf_sk->sk.sk_err = EPIPE;
-			break;
-		}
-	} while (ret == -EAGAIN);
-	return ret;
+	return cf_sk->layer.dn->transmit(cf_sk->layer.dn, pkt);
 }
 
 /* Copied from af_unix:unix_dgram_sendmsg, and adapted to CAIF */
@@ -620,7 +607,9 @@ static int caif_seqpkt_sendmsg(struct kiocb *kiocb, struct socket *sock,
 		goto err;
 	ret = transmit_skb(skb, cf_sk, noblock, timeo);
 	if (ret < 0)
-		goto err;
+		/* skb is already freed */
+		return ret;
+
 	return len;
 err:
 	kfree_skb(skb);
@@ -826,7 +815,7 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr,
 				sk->sk_state == CAIF_DISCONNECTED);
 		if (sk->sk_shutdown & SHUTDOWN_MASK) {
 			/* Allow re-connect after SHUTDOWN_IND */
-			caif_disconnect_client(&cf_sk->layer);
+			caif_disconnect_client(sock_net(sk), &cf_sk->layer);
 			break;
 		}
 		/* No reconnect on a seqpacket socket */
@@ -866,8 +855,10 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr,
 
 	dbfs_atomic_inc(&cnt.num_connect_req);
 	cf_sk->layer.receive = caif_sktrecv_cb;
-	err = caif_connect_client(&cf_sk->conn_req,
+
+	err = caif_connect_client(sock_net(sk), &cf_sk->conn_req,
 				&cf_sk->layer, &ifindex, &headroom, &tailroom);
+
 	if (err < 0) {
 		cf_sk->sk.sk_socket->state = SS_UNCONNECTED;
 		cf_sk->sk.sk_state = CAIF_DISCONNECTED;
@@ -947,13 +938,14 @@ static int caif_release(struct socket *sock)
 	 * caif_queue_rcv_skb checks SOCK_DEAD holding the queue lock,
 	 * this ensures no packets when sock is dead.
 	 */
-	spin_lock(&sk->sk_receive_queue.lock);
+	spin_lock_bh(&sk->sk_receive_queue.lock);
 	sock_set_flag(sk, SOCK_DEAD);
-	spin_unlock(&sk->sk_receive_queue.lock);
+	spin_unlock_bh(&sk->sk_receive_queue.lock);
 	sock->sk = NULL;
 
 	dbfs_atomic_inc(&cnt.num_disconnect);
 
+	WARN_ON(IS_ERR(cf_sk->debugfs_socket_dir));
 	if (cf_sk->debugfs_socket_dir != NULL)
 		debugfs_remove_recursive(cf_sk->debugfs_socket_dir);
 
@@ -963,13 +955,12 @@ static int caif_release(struct socket *sock)
 
 	if (cf_sk->sk.sk_socket->state == SS_CONNECTED ||
 		cf_sk->sk.sk_socket->state == SS_CONNECTING)
-		res = caif_disconnect_client(&cf_sk->layer);
+		res = caif_disconnect_client(sock_net(sk), &cf_sk->layer);
 
 	cf_sk->sk.sk_socket->state = SS_DISCONNECTING;
 	wake_up_interruptible_poll(sk_sleep(sk), POLLERR|POLLHUP);
 
 	sock_orphan(sk);
-	cf_sk->layer.dn = NULL;
 	sk_stream_kill_queues(&cf_sk->sk);
 	release_sock(sk);
 	sock_put(sk);
@@ -1060,16 +1051,18 @@ static void caif_sock_destructor(struct sock *sk)
 	caif_assert(sk_unhashed(sk));
 	caif_assert(!sk->sk_socket);
 	if (!sock_flag(sk, SOCK_DEAD)) {
-		pr_info("Attempt to release alive CAIF socket: %p\n", sk);
+		pr_debug("Attempt to release alive CAIF socket: %p\n", sk);
 		return;
 	}
 	sk_stream_kill_queues(&cf_sk->sk);
 	dbfs_atomic_dec(&cnt.caif_nr_socks);
+	caif_free_client(&cf_sk->layer);
 }
 
 static int caif_create(struct net *net, struct socket *sock, int protocol,
 			int kern)
 {
+	int num;
 	struct sock *sk = NULL;
 	struct caifsock *cf_sk = NULL;
 	static struct proto prot = {.name = "PF_CAIF",
@@ -1132,14 +1125,16 @@ static int caif_create(struct net *net, struct socket *sock, int protocol,
 	cf_sk->conn_req.protocol = protocol;
 	/* Increase the number of sockets created. */
 	dbfs_atomic_inc(&cnt.caif_nr_socks);
+	num = dbfs_atomic_inc(&cnt.caif_sock_create);
 #ifdef CONFIG_DEBUG_FS
 	if (!IS_ERR(debugfsdir)) {
+
 		/* Fill in some information concerning the misc socket. */
-		snprintf(cf_sk->name, sizeof(cf_sk->name), "cfsk%d",
-				atomic_read(&cnt.caif_nr_socks));
+		snprintf(cf_sk->name, sizeof(cf_sk->name), "cfsk%d", num);
 
 		cf_sk->debugfs_socket_dir =
 			debugfs_create_dir(cf_sk->name, debugfsdir);
+
 		debugfs_create_u32("sk_state", S_IRUSR | S_IWUSR,
 				cf_sk->debugfs_socket_dir,
 				(u32 *) &cf_sk->sk.sk_state);
@@ -1183,6 +1178,9 @@ static int __init caif_sktinit_module(void)
 		debugfs_create_u32("num_sockets", S_IRUSR | S_IWUSR,
 				debugfsdir,
 				(u32 *) &cnt.caif_nr_socks);
+		debugfs_create_u32("num_create", S_IRUSR | S_IWUSR,
+				debugfsdir,
+				(u32 *) &cnt.caif_sock_create);
 		debugfs_create_u32("num_connect_req", S_IRUSR | S_IWUSR,
 				debugfsdir,
 				(u32 *) &cnt.num_connect_req);
diff --git a/net/caif/cfcnfg.c b/net/caif/cfcnfg.c
index f1f98d967d8..351c2ca7e7b 100644
--- a/net/caif/cfcnfg.c
+++ b/net/caif/cfcnfg.c
@@ -10,6 +10,7 @@
 #include <linux/stddef.h>
 #include <linux/slab.h>
 #include <linux/netdevice.h>
+#include <linux/module.h>
 #include <net/caif/caif_layer.h>
 #include <net/caif/cfpkt.h>
 #include <net/caif/cfcnfg.h>
@@ -18,11 +19,7 @@
 #include <net/caif/cffrml.h>
 #include <net/caif/cfserl.h>
 #include <net/caif/cfsrvl.h>
-
-#include <linux/module.h>
-#include <asm/atomic.h>
-
-#define MAX_PHY_LAYERS 7
+#include <net/caif/caif_dev.h>
 
 #define container_obj(layr) container_of(layr, struct cfcnfg, layer)
 
@@ -30,6 +27,9 @@
  * to manage physical interfaces
  */
 struct cfcnfg_phyinfo {
+	struct list_head node;
+	bool up;
+
 	/* Pointer to the layer below the MUX (framing layer) */
 	struct cflayer *frm_layer;
 	/* Pointer to the lowest actual physical layer */
@@ -39,9 +39,6 @@ struct cfcnfg_phyinfo {
 	/* Preference of the physical in interface */
 	enum cfcnfg_phy_preference pref;
 
-	/* Reference count, number of channels using the device */
-	int phy_ref_count;
-
 	/* Information about the physical device */
 	struct dev_info dev_info;
 
@@ -59,8 +56,8 @@ struct cfcnfg {
 	struct cflayer layer;
 	struct cflayer *ctrl;
 	struct cflayer *mux;
-	u8 last_phyid;
-	struct cfcnfg_phyinfo phy_layers[MAX_PHY_LAYERS];
+	struct list_head phys;
+	struct mutex lock;
 };
 
 static void cfcnfg_linkup_rsp(struct cflayer *layer, u8 channel_id,
@@ -76,6 +73,9 @@ struct cfcnfg *cfcnfg_create(void)
 {
 	struct cfcnfg *this;
 	struct cfctrl_rsp *resp;
+
+	might_sleep();
+
 	/* Initiate this layer */
 	this = kzalloc(sizeof(struct cfcnfg), GFP_ATOMIC);
 	if (!this) {
@@ -99,27 +99,33 @@ struct cfcnfg *cfcnfg_create(void)
 	resp->radioset_rsp = cfctrl_resp_func;
 	resp->linksetup_rsp = cfcnfg_linkup_rsp;
 	resp->reject_rsp = cfcnfg_reject_rsp;
-
-	this->last_phyid = 1;
+	INIT_LIST_HEAD(&this->phys);
 
 	cfmuxl_set_uplayer(this->mux, this->ctrl, 0);
 	layer_set_dn(this->ctrl, this->mux);
 	layer_set_up(this->ctrl, this);
+	mutex_init(&this->lock);
+
 	return this;
 out_of_mem:
 	pr_warn("Out of memory\n");
+
+	synchronize_rcu();
+
 	kfree(this->mux);
 	kfree(this->ctrl);
 	kfree(this);
 	return NULL;
 }
-EXPORT_SYMBOL(cfcnfg_create);
 
 void cfcnfg_remove(struct cfcnfg *cfg)
 {
+	might_sleep();
 	if (cfg) {
+		synchronize_rcu();
+
 		kfree(cfg->mux);
-		kfree(cfg->ctrl);
+		cfctrl_remove(cfg->ctrl);
 		kfree(cfg);
 	}
 }
@@ -128,132 +134,96 @@ static void cfctrl_resp_func(void)
 {
 }
 
+static struct cfcnfg_phyinfo *cfcnfg_get_phyinfo_rcu(struct cfcnfg *cnfg,
+							u8 phyid)
+{
+	struct cfcnfg_phyinfo *phy;
+
+	list_for_each_entry_rcu(phy, &cnfg->phys, node)
+		if (phy->id == phyid)
+			return phy;
+	return NULL;
+}
+
 static void cfctrl_enum_resp(void)
 {
 }
 
-struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
+static struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
 				  enum cfcnfg_phy_preference phy_pref)
 {
-	u16 i;
-
 	/* Try to match with specified preference */
-	for (i = 1; i < MAX_PHY_LAYERS; i++) {
-		if (cnfg->phy_layers[i].id == i &&
-		     cnfg->phy_layers[i].pref == phy_pref &&
-		     cnfg->phy_layers[i].frm_layer != NULL) {
-			caif_assert(cnfg->phy_layers != NULL);
-			caif_assert(cnfg->phy_layers[i].id == i);
-			return &cnfg->phy_layers[i].dev_info;
-		}
+	struct cfcnfg_phyinfo *phy;
+
+	list_for_each_entry_rcu(phy, &cnfg->phys, node) {
+		if (phy->up && phy->pref == phy_pref &&
+				phy->frm_layer != NULL)
+
+			return &phy->dev_info;
 	}
+
 	/* Otherwise just return something */
-	for (i = 1; i < MAX_PHY_LAYERS; i++) {
-		if (cnfg->phy_layers[i].id == i) {
-			caif_assert(cnfg->phy_layers != NULL);
-			caif_assert(cnfg->phy_layers[i].id == i);
-			return &cnfg->phy_layers[i].dev_info;
-		}
-	}
+	list_for_each_entry_rcu(phy, &cnfg->phys, node)
+		if (phy->up)
+			return &phy->dev_info;
 
 	return NULL;
 }
 
-static struct cfcnfg_phyinfo *cfcnfg_get_phyinfo(struct cfcnfg *cnfg,
-							u8 phyid)
+static int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi)
 {
-	int i;
-	/* Try to match with specified preference */
-	for (i = 0; i < MAX_PHY_LAYERS; i++)
-		if (cnfg->phy_layers[i].frm_layer != NULL &&
-		    cnfg->phy_layers[i].id == phyid)
-			return &cnfg->phy_layers[i];
-	return NULL;
-}
-
+	struct cfcnfg_phyinfo *phy;
 
-int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi)
-{
-	int i;
-	for (i = 0; i < MAX_PHY_LAYERS; i++)
-		if (cnfg->phy_layers[i].frm_layer != NULL &&
-				cnfg->phy_layers[i].ifindex == ifi)
-			return i;
+	list_for_each_entry_rcu(phy, &cnfg->phys, node)
+		if (phy->ifindex == ifi && phy->up)
+			return phy->id;
 	return -ENODEV;
 }
 
-int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg, struct cflayer *adap_layer)
+int caif_disconnect_client(struct net *net, struct cflayer *adap_layer)
 {
 	u8 channel_id = 0;
 	int ret = 0;
 	struct cflayer *servl = NULL;
-	struct cfcnfg_phyinfo *phyinfo = NULL;
-	u8 phyid = 0;
+	struct cfcnfg *cfg = get_cfcnfg(net);
 
 	caif_assert(adap_layer != NULL);
+
 	channel_id = adap_layer->id;
 	if (adap_layer->dn == NULL || channel_id == 0) {
 		pr_err("adap_layer->dn == NULL or adap_layer->id is 0\n");
 		ret = -ENOTCONN;
 		goto end;
 	}
-	servl = cfmuxl_remove_uplayer(cnfg->mux, channel_id);
+
+	servl = cfmuxl_remove_uplayer(cfg->mux, channel_id);
 	if (servl == NULL) {
-		pr_err("PROTOCOL ERROR - Error removing service_layer Channel_Id(%d)",
-		       channel_id);
+		pr_err("PROTOCOL ERROR - "
+				"Error removing service_layer Channel_Id(%d)",
+				channel_id);
 		ret = -EINVAL;
 		goto end;
 	}
-	layer_set_up(servl, NULL);
-	ret = cfctrl_linkdown_req(cnfg->ctrl, channel_id, adap_layer);
-	if (ret)
-		goto end;
-	caif_assert(channel_id == servl->id);
-	if (adap_layer->dn != NULL) {
-		phyid = cfsrvl_getphyid(adap_layer->dn);
-
-		phyinfo = cfcnfg_get_phyinfo(cnfg, phyid);
-		if (phyinfo == NULL) {
-			pr_warn("No interface to send disconnect to\n");
-			ret = -ENODEV;
-			goto end;
-		}
-		if (phyinfo->id != phyid ||
-			phyinfo->phy_layer->id != phyid ||
-			phyinfo->frm_layer->id != phyid) {
-			pr_err("Inconsistency in phy registration\n");
-			ret = -EINVAL;
-			goto end;
-		}
-	}
-	if (phyinfo != NULL && --phyinfo->phy_ref_count == 0 &&
-		phyinfo->phy_layer != NULL &&
-		phyinfo->phy_layer->modemcmd != NULL) {
-		phyinfo->phy_layer->modemcmd(phyinfo->phy_layer,
-					     _CAIF_MODEMCMD_PHYIF_USELESS);
-	}
+
+	ret = cfctrl_linkdown_req(cfg->ctrl, channel_id, adap_layer);
+
 end:
-	cfsrvl_put(servl);
-	cfctrl_cancel_req(cnfg->ctrl, adap_layer);
+	cfctrl_cancel_req(cfg->ctrl, adap_layer);
+
+	/* Do RCU sync before initiating cleanup */
+	synchronize_rcu();
 	if (adap_layer->ctrlcmd != NULL)
 		adap_layer->ctrlcmd(adap_layer, CAIF_CTRLCMD_DEINIT_RSP, 0);
 	return ret;
 
 }
-EXPORT_SYMBOL(cfcnfg_disconn_adapt_layer);
-
-void cfcnfg_release_adap_layer(struct cflayer *adap_layer)
-{
-	if (adap_layer->dn)
-		cfsrvl_put(adap_layer->dn);
-}
-EXPORT_SYMBOL(cfcnfg_release_adap_layer);
+EXPORT_SYMBOL(caif_disconnect_client);
 
 static void cfcnfg_linkdestroy_rsp(struct cflayer *layer, u8 channel_id)
 {
 }
 
-int protohead[CFCTRL_SRV_MASK] = {
+static const int protohead[CFCTRL_SRV_MASK] = {
 	[CFCTRL_SRV_VEI] = 4,
 	[CFCTRL_SRV_DATAGRAM] = 7,
 	[CFCTRL_SRV_UTIL] = 4,
@@ -261,49 +231,157 @@ int protohead[CFCTRL_SRV_MASK] = {
 	[CFCTRL_SRV_DBG] = 3,
 };
 
-int cfcnfg_add_adaptation_layer(struct cfcnfg *cnfg,
-				struct cfctrl_link_param *param,
-				struct cflayer *adap_layer,
-				int *ifindex,
+
+static int caif_connect_req_to_link_param(struct cfcnfg *cnfg,
+				   struct caif_connect_request *s,
+				   struct cfctrl_link_param *l)
+{
+	struct dev_info *dev_info;
+	enum cfcnfg_phy_preference pref;
+	int res;
+
+	memset(l, 0, sizeof(*l));
+	/* In caif protocol low value is high priority */
+	l->priority = CAIF_PRIO_MAX - s->priority + 1;
+
+	if (s->ifindex != 0) {
+		res = cfcnfg_get_id_from_ifi(cnfg, s->ifindex);
+		if (res < 0)
+			return res;
+		l->phyid = res;
+	} else {
+		switch (s->link_selector) {
+		case CAIF_LINK_HIGH_BANDW:
+			pref = CFPHYPREF_HIGH_BW;
+			break;
+		case CAIF_LINK_LOW_LATENCY:
+			pref = CFPHYPREF_LOW_LAT;
+			break;
+		default:
+			return -EINVAL;
+		}
+		dev_info = cfcnfg_get_phyid(cnfg, pref);
+		if (dev_info == NULL)
+			return -ENODEV;
+		l->phyid = dev_info->id;
+	}
+	switch (s->protocol) {
+	case CAIFPROTO_AT:
+		l->linktype = CFCTRL_SRV_VEI;
+		l->endpoint = (s->sockaddr.u.at.type >> 2) & 0x3;
+		l->chtype = s->sockaddr.u.at.type & 0x3;
+		break;
+	case CAIFPROTO_DATAGRAM:
+		l->linktype = CFCTRL_SRV_DATAGRAM;
+		l->chtype = 0x00;
+		l->u.datagram.connid = s->sockaddr.u.dgm.connection_id;
+		break;
+	case CAIFPROTO_DATAGRAM_LOOP:
+		l->linktype = CFCTRL_SRV_DATAGRAM;
+		l->chtype = 0x03;
+		l->endpoint = 0x00;
+		l->u.datagram.connid = s->sockaddr.u.dgm.connection_id;
+		break;
+	case CAIFPROTO_RFM:
+		l->linktype = CFCTRL_SRV_RFM;
+		l->u.datagram.connid = s->sockaddr.u.rfm.connection_id;
+		strncpy(l->u.rfm.volume, s->sockaddr.u.rfm.volume,
+			sizeof(l->u.rfm.volume)-1);
+		l->u.rfm.volume[sizeof(l->u.rfm.volume)-1] = 0;
+		break;
+	case CAIFPROTO_UTIL:
+		l->linktype = CFCTRL_SRV_UTIL;
+		l->endpoint = 0x00;
+		l->chtype = 0x00;
+		strncpy(l->u.utility.name, s->sockaddr.u.util.service,
+			sizeof(l->u.utility.name)-1);
+		l->u.utility.name[sizeof(l->u.utility.name)-1] = 0;
+		caif_assert(sizeof(l->u.utility.name) > 10);
+		l->u.utility.paramlen = s->param.size;
+		if (l->u.utility.paramlen > sizeof(l->u.utility.params))
+			l->u.utility.paramlen = sizeof(l->u.utility.params);
+
+		memcpy(l->u.utility.params, s->param.data,
+		       l->u.utility.paramlen);
+
+		break;
+	case CAIFPROTO_DEBUG:
+		l->linktype = CFCTRL_SRV_DBG;
+		l->endpoint = s->sockaddr.u.dbg.service;
+		l->chtype = s->sockaddr.u.dbg.type;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int caif_connect_client(struct net *net, struct caif_connect_request *conn_req,
+			struct cflayer *adap_layer, int *ifindex,
 				int *proto_head,
 				int *proto_tail)
 {
 	struct cflayer *frml;
+	struct cfcnfg_phyinfo *phy;
+	int err;
+	struct cfctrl_link_param param;
+	struct cfcnfg *cfg = get_cfcnfg(net);
+	caif_assert(cfg != NULL);
+
+	rcu_read_lock();
+	err = caif_connect_req_to_link_param(cfg, conn_req, &param);
+	if (err)
+		goto unlock;
+
+	phy = cfcnfg_get_phyinfo_rcu(cfg, param.phyid);
+	if (!phy) {
+		err = -ENODEV;
+		goto unlock;
+	}
+	err = -EINVAL;
+
 	if (adap_layer == NULL) {
 		pr_err("adap_layer is zero\n");
-		return -EINVAL;
+		goto unlock;
 	}
 	if (adap_layer->receive == NULL) {
 		pr_err("adap_layer->receive is NULL\n");
-		return -EINVAL;
+		goto unlock;
 	}
 	if (adap_layer->ctrlcmd == NULL) {
 		pr_err("adap_layer->ctrlcmd == NULL\n");
-		return -EINVAL;
+		goto unlock;
 	}
-	frml = cnfg->phy_layers[param->phyid].frm_layer;
+
+	err = -ENODEV;
+	frml = phy->frm_layer;
 	if (frml == NULL) {
 		pr_err("Specified PHY type does not exist!\n");
-		return -ENODEV;
+		goto unlock;
 	}
-	caif_assert(param->phyid == cnfg->phy_layers[param->phyid].id);
-	caif_assert(cnfg->phy_layers[param->phyid].frm_layer->id ==
-		     param->phyid);
-	caif_assert(cnfg->phy_layers[param->phyid].phy_layer->id ==
-		     param->phyid);
+	caif_assert(param.phyid == phy->id);
+	caif_assert(phy->frm_layer->id ==
+		     param.phyid);
+	caif_assert(phy->phy_layer->id ==
+		     param.phyid);
 
-	*ifindex = cnfg->phy_layers[param->phyid].ifindex;
+	*ifindex = phy->ifindex;
+	*proto_tail = 2;
 	*proto_head =
-		protohead[param->linktype]+
-		(cnfg->phy_layers[param->phyid].use_stx ? 1 : 0);
 
-	*proto_tail = 2;
+	protohead[param.linktype] + (phy->use_stx ? 1 : 0);
+
+	rcu_read_unlock();
 
 	/* FIXME: ENUMERATE INITIALLY WHEN ACTIVATING PHYSICAL INTERFACE */
-	cfctrl_enum_req(cnfg->ctrl, param->phyid);
-	return cfctrl_linkup_request(cnfg->ctrl, param, adap_layer);
+	cfctrl_enum_req(cfg->ctrl, param.phyid);
+	return cfctrl_linkup_request(cfg->ctrl, &param, adap_layer);
+
+unlock:
+	rcu_read_unlock();
+	return err;
 }
-EXPORT_SYMBOL(cfcnfg_add_adaptation_layer);
+EXPORT_SYMBOL(caif_connect_client);
 
 static void cfcnfg_reject_rsp(struct cflayer *layer, u8 channel_id,
 			     struct cflayer *adapt_layer)
@@ -315,32 +393,37 @@ static void cfcnfg_reject_rsp(struct cflayer *layer, u8 channel_id,
 
 static void
 cfcnfg_linkup_rsp(struct cflayer *layer, u8 channel_id, enum cfctrl_srv serv,
-		 u8 phyid, struct cflayer *adapt_layer)
+		  u8 phyid, struct cflayer *adapt_layer)
 {
 	struct cfcnfg *cnfg = container_obj(layer);
 	struct cflayer *servicel = NULL;
 	struct cfcnfg_phyinfo *phyinfo;
 	struct net_device *netdev;
 
+	rcu_read_lock();
+
 	if (adapt_layer == NULL) {
-		pr_debug("link setup response but no client exist, send linkdown back\n");
+		pr_debug("link setup response but no client exist,"
+				"send linkdown back\n");
 		cfctrl_linkdown_req(cnfg->ctrl, channel_id, NULL);
-		return;
+		goto unlock;
 	}
 
 	caif_assert(cnfg != NULL);
 	caif_assert(phyid != 0);
-	phyinfo = &cnfg->phy_layers[phyid];
+
+	phyinfo = cfcnfg_get_phyinfo_rcu(cnfg, phyid);
+	if (phyinfo == NULL) {
+		pr_err("ERROR: Link Layer Device dissapeared"
+				"while connecting\n");
+		goto unlock;
+	}
+
+	caif_assert(phyinfo != NULL);
 	caif_assert(phyinfo->id == phyid);
 	caif_assert(phyinfo->phy_layer != NULL);
 	caif_assert(phyinfo->phy_layer->id == phyid);
 
-	phyinfo->phy_ref_count++;
-	if (phyinfo->phy_ref_count == 1 &&
-	    phyinfo->phy_layer->modemcmd != NULL) {
-		phyinfo->phy_layer->modemcmd(phyinfo->phy_layer,
-					     _CAIF_MODEMCMD_PHYIF_USEFULL);
-	}
 	adapt_layer->id = channel_id;
 
 	switch (serv) {
@@ -348,7 +431,8 @@ cfcnfg_linkup_rsp(struct cflayer *layer, u8 channel_id, enum cfctrl_srv serv,
 		servicel = cfvei_create(channel_id, &phyinfo->dev_info);
 		break;
 	case CFCTRL_SRV_DATAGRAM:
-		servicel = cfdgml_create(channel_id, &phyinfo->dev_info);
+		servicel = cfdgml_create(channel_id,
+					&phyinfo->dev_info);
 		break;
 	case CFCTRL_SRV_RFM:
 		netdev = phyinfo->dev_info.dev;
@@ -365,94 +449,93 @@ cfcnfg_linkup_rsp(struct cflayer *layer, u8 channel_id, enum cfctrl_srv serv,
 		servicel = cfdbgl_create(channel_id, &phyinfo->dev_info);
 		break;
 	default:
-		pr_err("Protocol error. Link setup response - unknown channel type\n");
-		return;
+		pr_err("Protocol error. Link setup response "
+				"- unknown channel type\n");
+		goto unlock;
 	}
 	if (!servicel) {
 		pr_warn("Out of memory\n");
-		return;
+		goto unlock;
 	}
 	layer_set_dn(servicel, cnfg->mux);
 	cfmuxl_set_uplayer(cnfg->mux, servicel, channel_id);
 	layer_set_up(servicel, adapt_layer);
 	layer_set_dn(adapt_layer, servicel);
-	cfsrvl_get(servicel);
+
+	rcu_read_unlock();
+
 	servicel->ctrlcmd(servicel, CAIF_CTRLCMD_INIT_RSP, 0);
+	return;
+unlock:
+	rcu_read_unlock();
 }
 
 void
 cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type,
 		     struct net_device *dev, struct cflayer *phy_layer,
-		     u16 *phyid, enum cfcnfg_phy_preference pref,
+		     enum cfcnfg_phy_preference pref,
 		     bool fcs, bool stx)
 {
 	struct cflayer *frml;
 	struct cflayer *phy_driver = NULL;
+	struct cfcnfg_phyinfo *phyinfo;
 	int i;
+	u8 phyid;
 
+	mutex_lock(&cnfg->lock);
 
-	if (cnfg->phy_layers[cnfg->last_phyid].frm_layer == NULL) {
-		*phyid = cnfg->last_phyid;
-
-		/* range: * 1..(MAX_PHY_LAYERS-1) */
-		cnfg->last_phyid =
-		    (cnfg->last_phyid % (MAX_PHY_LAYERS - 1)) + 1;
-	} else {
-		*phyid = 0;
-		for (i = 1; i < MAX_PHY_LAYERS; i++) {
-			if (cnfg->phy_layers[i].frm_layer == NULL) {
-				*phyid = i;
-				break;
-			}
-		}
-	}
-	if (*phyid == 0) {
-		pr_err("No Available PHY ID\n");
-		return;
+	/* CAIF protocol allow maximum 6 link-layers */
+	for (i = 0; i < 7; i++) {
+		phyid = (dev->ifindex + i) & 0x7;
+		if (phyid == 0)
+			continue;
+		if (cfcnfg_get_phyinfo_rcu(cnfg, phyid) == NULL)
+			goto got_phyid;
 	}
+	pr_warn("Too many CAIF Link Layers (max 6)\n");
+	goto out;
+
+got_phyid:
+	phyinfo = kzalloc(sizeof(struct cfcnfg_phyinfo), GFP_ATOMIC);
 
 	switch (phy_type) {
 	case CFPHYTYPE_FRAG:
 		phy_driver =
-		    cfserl_create(CFPHYTYPE_FRAG, *phyid, stx);
+		    cfserl_create(CFPHYTYPE_FRAG, phyid, stx);
 		if (!phy_driver) {
 			pr_warn("Out of memory\n");
-			return;
+			goto out;
 		}
-
 		break;
 	case CFPHYTYPE_CAIF:
 		phy_driver = NULL;
 		break;
 	default:
-		pr_err("%d\n", phy_type);
-		return;
-		break;
+		goto out;
 	}
-
-	phy_layer->id = *phyid;
-	cnfg->phy_layers[*phyid].pref = pref;
-	cnfg->phy_layers[*phyid].id = *phyid;
-	cnfg->phy_layers[*phyid].dev_info.id = *phyid;
-	cnfg->phy_layers[*phyid].dev_info.dev = dev;
-	cnfg->phy_layers[*phyid].phy_layer = phy_layer;
-	cnfg->phy_layers[*phyid].phy_ref_count = 0;
-	cnfg->phy_layers[*phyid].ifindex = dev->ifindex;
-	cnfg->phy_layers[*phyid].use_stx = stx;
-	cnfg->phy_layers[*phyid].use_fcs = fcs;
+	phy_layer->id = phyid;
+	phyinfo->pref = pref;
+	phyinfo->id = phyid;
+	phyinfo->dev_info.id = phyid;
+	phyinfo->dev_info.dev = dev;
+	phyinfo->phy_layer = phy_layer;
+	phyinfo->ifindex = dev->ifindex;
+	phyinfo->use_stx = stx;
+	phyinfo->use_fcs = fcs;
 
 	phy_layer->type = phy_type;
-	frml = cffrml_create(*phyid, fcs);
+	frml = cffrml_create(phyid, fcs);
+
 	if (!frml) {
 		pr_warn("Out of memory\n");
-		return;
+		kfree(phyinfo);
+		goto out;
 	}
-	cnfg->phy_layers[*phyid].frm_layer = frml;
-	cfmuxl_set_dnlayer(cnfg->mux, frml, *phyid);
+	phyinfo->frm_layer = frml;
 	layer_set_up(frml, cnfg->mux);
 
 	if (phy_driver != NULL) {
-		phy_driver->id = *phyid;
+		phy_driver->id = phyid;
 		layer_set_dn(frml, phy_driver);
 		layer_set_up(phy_driver, frml);
 		layer_set_dn(phy_driver, phy_layer);
@@ -461,33 +544,95 @@ cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type,
 		layer_set_dn(frml, phy_layer);
 		layer_set_up(phy_layer, frml);
 	}
+
+	list_add_rcu(&phyinfo->node, &cnfg->phys);
+out:
+	mutex_unlock(&cnfg->lock);
 }
 EXPORT_SYMBOL(cfcnfg_add_phy_layer);
 
+int cfcnfg_set_phy_state(struct cfcnfg *cnfg, struct cflayer *phy_layer,
+		bool up)
+{
+	struct cfcnfg_phyinfo *phyinfo;
+
+	rcu_read_lock();
+	phyinfo = cfcnfg_get_phyinfo_rcu(cnfg, phy_layer->id);
+	if (phyinfo == NULL) {
+		rcu_read_unlock();
+		return -ENODEV;
+	}
+
+	if (phyinfo->up == up) {
+		rcu_read_unlock();
+		return 0;
+	}
+	phyinfo->up = up;
+
+	if (up) {
+		cffrml_hold(phyinfo->frm_layer);
+		cfmuxl_set_dnlayer(cnfg->mux, phyinfo->frm_layer,
+					phy_layer->id);
+	} else {
+		cfmuxl_remove_dnlayer(cnfg->mux, phy_layer->id);
+		cffrml_put(phyinfo->frm_layer);
+	}
+
+	rcu_read_unlock();
+	return 0;
+}
+EXPORT_SYMBOL(cfcnfg_set_phy_state);
+
 int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer)
 {
 	struct cflayer *frml, *frml_dn;
 	u16 phyid;
+	struct cfcnfg_phyinfo *phyinfo;
+
+	might_sleep();
+
+	mutex_lock(&cnfg->lock);
+
 	phyid = phy_layer->id;
-	caif_assert(phyid == cnfg->phy_layers[phyid].id);
-	caif_assert(phy_layer == cnfg->phy_layers[phyid].phy_layer);
+	phyinfo = cfcnfg_get_phyinfo_rcu(cnfg, phyid);
+
+	if (phyinfo == NULL) {
+		mutex_unlock(&cnfg->lock);
+		return 0;
+	}
+	caif_assert(phyid == phyinfo->id);
+	caif_assert(phy_layer == phyinfo->phy_layer);
 	caif_assert(phy_layer->id == phyid);
-	caif_assert(cnfg->phy_layers[phyid].frm_layer->id == phyid);
+	caif_assert(phyinfo->frm_layer->id == phyid);
 
-	memset(&cnfg->phy_layers[phy_layer->id], 0,
-	       sizeof(struct cfcnfg_phyinfo));
-	frml = cfmuxl_remove_dnlayer(cnfg->mux, phy_layer->id);
+	list_del_rcu(&phyinfo->node);
+	synchronize_rcu();
+
+	/* Fail if reference count is not zero */
+	if (cffrml_refcnt_read(phyinfo->frm_layer) != 0) {
+		pr_info("Wait for device inuse\n");
+		list_add_rcu(&phyinfo->node, &cnfg->phys);
+		mutex_unlock(&cnfg->lock);
+		return -EAGAIN;
+	}
+
+	frml = phyinfo->frm_layer;
 	frml_dn = frml->dn;
 	cffrml_set_uplayer(frml, NULL);
 	cffrml_set_dnlayer(frml, NULL);
-	kfree(frml);
-
 	if (phy_layer != frml_dn) {
 		layer_set_up(frml_dn, NULL);
 		layer_set_dn(frml_dn, NULL);
-		kfree(frml_dn);
 	}
 	layer_set_up(phy_layer, NULL);
+
+	if (phyinfo->phy_layer != frml_dn)
+		kfree(frml_dn);
+
+	cffrml_free(frml);
+	kfree(phyinfo);
+	mutex_unlock(&cnfg->lock);
+
 	return 0;
 }
 EXPORT_SYMBOL(cfcnfg_del_phy_layer);
diff --git a/net/caif/cfctrl.c b/net/caif/cfctrl.c
index 3cd8f978e30..0c00a6015dd 100644
--- a/net/caif/cfctrl.c
+++ b/net/caif/cfctrl.c
@@ -17,7 +17,6 @@
 #define UTILITY_NAME_LENGTH 16
 #define CFPKT_CTRL_PKT_LEN 20
 
-
 #ifdef CAIF_NO_LOOP
 static int handle_loop(struct cfctrl *ctrl,
 			      int cmd, struct cfpkt *pkt){
@@ -51,14 +50,31 @@ struct cflayer *cfctrl_create(void)
 	this->serv.layer.receive = cfctrl_recv;
 	sprintf(this->serv.layer.name, "ctrl");
 	this->serv.layer.ctrlcmd = cfctrl_ctrlcmd;
+#ifndef CAIF_NO_LOOP
 	spin_lock_init(&this->loop_linkid_lock);
+	this->loop_linkid = 1;
+#endif
 	spin_lock_init(&this->info_list_lock);
 	INIT_LIST_HEAD(&this->list);
-	this->loop_linkid = 1;
 	return &this->serv.layer;
 }
 
-static bool param_eq(struct cfctrl_link_param *p1, struct cfctrl_link_param *p2)
+void cfctrl_remove(struct cflayer *layer)
+{
+	struct cfctrl_request_info *p, *tmp;
+	struct cfctrl *ctrl = container_obj(layer);
+
+	spin_lock_bh(&ctrl->info_list_lock);
+	list_for_each_entry_safe(p, tmp, &ctrl->list, list) {
+		list_del(&p->list);
+		kfree(p);
+	}
+	spin_unlock_bh(&ctrl->info_list_lock);
+	kfree(layer);
+}
+
+static bool param_eq(const struct cfctrl_link_param *p1,
+			const struct cfctrl_link_param *p2)
 {
 	bool eq =
 	    p1->linktype == p2->linktype &&
@@ -100,8 +116,8 @@ static bool param_eq(struct cfctrl_link_param *p1, struct cfctrl_link_param *p2)
 	return false;
 }
 
-bool cfctrl_req_eq(struct cfctrl_request_info *r1,
-		   struct cfctrl_request_info *r2)
+static bool cfctrl_req_eq(const struct cfctrl_request_info *r1,
+			  const struct cfctrl_request_info *r2)
 {
 	if (r1->cmd != r2->cmd)
 		return false;
@@ -112,23 +128,22 @@ bool cfctrl_req_eq(struct cfctrl_request_info *r1,
 }
 
 /* Insert request at the end */
-void cfctrl_insert_req(struct cfctrl *ctrl,
+static void cfctrl_insert_req(struct cfctrl *ctrl,
 			      struct cfctrl_request_info *req)
 {
-	spin_lock(&ctrl->info_list_lock);
+	spin_lock_bh(&ctrl->info_list_lock);
 	atomic_inc(&ctrl->req_seq_no);
 	req->sequence_no = atomic_read(&ctrl->req_seq_no);
 	list_add_tail(&req->list, &ctrl->list);
-	spin_unlock(&ctrl->info_list_lock);
+	spin_unlock_bh(&ctrl->info_list_lock);
 }
 
 /* Compare and remove request */
-struct cfctrl_request_info *cfctrl_remove_req(struct cfctrl *ctrl,
-					      struct cfctrl_request_info *req)
+static struct cfctrl_request_info *cfctrl_remove_req(struct cfctrl *ctrl,
+						struct cfctrl_request_info *req)
 {
 	struct cfctrl_request_info *p, *tmp, *first;
 
-	spin_lock(&ctrl->info_list_lock);
 	first = list_first_entry(&ctrl->list, struct cfctrl_request_info, list);
 
 	list_for_each_entry_safe(p, tmp, &ctrl->list, list) {
@@ -144,7 +159,6 @@ struct cfctrl_request_info *cfctrl_remove_req(struct cfctrl *ctrl,
 	}
 	p = NULL;
 out:
-	spin_unlock(&ctrl->info_list_lock);
 	return p;
 }
 
@@ -154,16 +168,6 @@ struct cfctrl_rsp *cfctrl_get_respfuncs(struct cflayer *layer)
 	return &this->res;
 }
 
-void cfctrl_set_dnlayer(struct cflayer *this, struct cflayer *dn)
-{
-	this->dn = dn;
-}
-
-void cfctrl_set_uplayer(struct cflayer *this, struct cflayer *up)
-{
-	this->up = up;
-}
-
 static void init_info(struct caif_payload_info *info, struct cfctrl *cfctrl)
 {
 	info->hdr_len = 0;
@@ -188,10 +192,6 @@ void cfctrl_enum_req(struct cflayer *layer, u8 physlinkid)
 	cfpkt_addbdy(pkt, physlinkid);
 	ret =
 	    cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
-	if (ret < 0) {
-		pr_err("Could not transmit enum message\n");
-		cfpkt_destroy(pkt);
-	}
 }
 
 int cfctrl_linkup_request(struct cflayer *layer,
@@ -205,14 +205,23 @@ int cfctrl_linkup_request(struct cflayer *layer,
 	struct cfctrl_request_info *req;
 	int ret;
 	char utility_name[16];
-	struct cfpkt *pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
+	struct cfpkt *pkt;
+
+	if (cfctrl_cancel_req(layer, user_layer) > 0) {
+		/* Slight Paranoia, check if already connecting */
+		pr_err("Duplicate connect request for same client\n");
+		WARN_ON(1);
+		return -EALREADY;
+	}
+
+	pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
 	if (!pkt) {
 		pr_warn("Out of memory\n");
 		return -ENOMEM;
 	}
 	cfpkt_addbdy(pkt, CFCTRL_CMD_LINK_SETUP);
-	cfpkt_addbdy(pkt, (param->chtype << 4) + param->linktype);
-	cfpkt_addbdy(pkt, (param->priority << 3) + param->phyid);
+	cfpkt_addbdy(pkt, (param->chtype << 4) | param->linktype);
+	cfpkt_addbdy(pkt, (param->priority << 3) | param->phyid);
 	cfpkt_addbdy(pkt, param->endpoint & 0x03);
 
 	switch (param->linktype) {
@@ -275,9 +284,13 @@ int cfctrl_linkup_request(struct cflayer *layer,
 	ret =
 	    cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
 	if (ret < 0) {
-		pr_err("Could not transmit linksetup request\n");
-		cfpkt_destroy(pkt);
-		return -ENODEV;
+		int count;
+
+		count = cfctrl_cancel_req(&cfctrl->serv.layer,
+						user_layer);
+		if (count != 1)
+			pr_err("Could not remove request (%d)", count);
+			return -ENODEV;
 	}
 	return 0;
 }
@@ -297,80 +310,29 @@ int cfctrl_linkdown_req(struct cflayer *layer, u8 channelid,
 	init_info(cfpkt_info(pkt), cfctrl);
 	ret =
 	    cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
-	if (ret < 0) {
-		pr_err("Could not transmit link-down request\n");
-		cfpkt_destroy(pkt);
-	}
+#ifndef CAIF_NO_LOOP
+	cfctrl->loop_linkused[channelid] = 0;
+#endif
 	return ret;
 }
 
-void cfctrl_sleep_req(struct cflayer *layer)
-{
-	int ret;
-	struct cfctrl *cfctrl = container_obj(layer);
-	struct cfpkt *pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
-	if (!pkt) {
-		pr_warn("Out of memory\n");
-		return;
-	}
-	cfpkt_addbdy(pkt, CFCTRL_CMD_SLEEP);
-	init_info(cfpkt_info(pkt), cfctrl);
-	ret =
-	    cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
-	if (ret < 0)
-		cfpkt_destroy(pkt);
-}
-
-void cfctrl_wake_req(struct cflayer *layer)
-{
-	int ret;
-	struct cfctrl *cfctrl = container_obj(layer);
-	struct cfpkt *pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
-	if (!pkt) {
-		pr_warn("Out of memory\n");
-		return;
-	}
-	cfpkt_addbdy(pkt, CFCTRL_CMD_WAKE);
-	init_info(cfpkt_info(pkt), cfctrl);
-	ret =
-	    cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
-	if (ret < 0)
-		cfpkt_destroy(pkt);
-}
-
-void cfctrl_getstartreason_req(struct cflayer *layer)
-{
-	int ret;
-	struct cfctrl *cfctrl = container_obj(layer);
-	struct cfpkt *pkt = cfpkt_create(CFPKT_CTRL_PKT_LEN);
-	if (!pkt) {
-		pr_warn("Out of memory\n");
-		return;
-	}
-	cfpkt_addbdy(pkt, CFCTRL_CMD_START_REASON);
-	init_info(cfpkt_info(pkt), cfctrl);
-	ret =
-	    cfctrl->serv.layer.dn->transmit(cfctrl->serv.layer.dn, pkt);
-	if (ret < 0)
-		cfpkt_destroy(pkt);
-}
-
-
-void cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer)
+int cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer)
 {
 	struct cfctrl_request_info *p, *tmp;
 	struct cfctrl *ctrl = container_obj(layr);
-	spin_lock(&ctrl->info_list_lock);
+	int found = 0;
+	spin_lock_bh(&ctrl->info_list_lock);
 
 	list_for_each_entry_safe(p, tmp, &ctrl->list, list) {
 		if (p->client_layer == adap_layer) {
-			pr_debug("cancel req :%d\n", p->sequence_no);
 			list_del(&p->list);
 			kfree(p);
+			found++;
 		}
 	}
 
-	spin_unlock(&ctrl->info_list_lock);
+	spin_unlock_bh(&ctrl->info_list_lock);
+	return found;
 }
 
 static int cfctrl_recv(struct cflayer *layer, struct cfpkt *pkt)
@@ -522,6 +484,7 @@ static int cfctrl_recv(struct cflayer *layer, struct cfpkt *pkt)
 
 			rsp.cmd = cmd;
 			rsp.param = linkparam;
+			spin_lock_bh(&cfctrl->info_list_lock);
 			req = cfctrl_remove_req(cfctrl, &rsp);
 
 			if (CFCTRL_ERR_BIT == (CFCTRL_ERR_BIT & cmdrsp) ||
@@ -541,6 +504,8 @@ static int cfctrl_recv(struct cflayer *layer, struct cfpkt *pkt)
 
 			if (req != NULL)
 				kfree(req);
+
+			spin_unlock_bh(&cfctrl->info_list_lock);
 		}
 		break;
 	case CFCTRL_CMD_LINK_DESTROY:
@@ -584,12 +549,29 @@ static void cfctrl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
 	switch (ctrl) {
 	case _CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND:
 	case CAIF_CTRLCMD_FLOW_OFF_IND:
-		spin_lock(&this->info_list_lock);
+		spin_lock_bh(&this->info_list_lock);
 		if (!list_empty(&this->list)) {
 			pr_debug("Received flow off in control layer\n");
 		}
-		spin_unlock(&this->info_list_lock);
+		spin_unlock_bh(&this->info_list_lock);
 		break;
+	case _CAIF_CTRLCMD_PHYIF_DOWN_IND: {
+		struct cfctrl_request_info *p, *tmp;
+
+		/* Find all connect request and report failure */
+		spin_lock_bh(&this->info_list_lock);
+		list_for_each_entry_safe(p, tmp, &this->list, list) {
+			if (p->param.phyid == phyid) {
+				list_del(&p->list);
+				p->client_layer->ctrlcmd(p->client_layer,
+						CAIF_CTRLCMD_INIT_FAIL_RSP,
+						phyid);
+				kfree(p);
+			}
+		}
+		spin_unlock_bh(&this->info_list_lock);
+		break;
+	}
 	default:
 		break;
 	}
@@ -599,27 +581,33 @@ static void cfctrl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
 static int handle_loop(struct cfctrl *ctrl, int cmd, struct cfpkt *pkt)
 {
 	static int last_linkid;
+	static int dec;
 	u8 linkid, linktype, tmp;
 	switch (cmd) {
 	case CFCTRL_CMD_LINK_SETUP:
-		spin_lock(&ctrl->loop_linkid_lock);
-		for (linkid = last_linkid + 1; linkid < 255; linkid++)
-			if (!ctrl->loop_linkused[linkid])
-				goto found;
+		spin_lock_bh(&ctrl->loop_linkid_lock);
+		if (!dec) {
+			for (linkid = last_linkid + 1; linkid < 255; linkid++)
+				if (!ctrl->loop_linkused[linkid])
+					goto found;
+		}
+		dec = 1;
 		for (linkid = last_linkid - 1; linkid > 0; linkid--)
 			if (!ctrl->loop_linkused[linkid])
 				goto found;
-		spin_unlock(&ctrl->loop_linkid_lock);
-		pr_err("Out of link-ids\n");
-		return -EINVAL;
+		spin_unlock_bh(&ctrl->loop_linkid_lock);
+
 found:
+		if (linkid < 10)
+			dec = 0;
+
 		if (!ctrl->loop_linkused[linkid])
 			ctrl->loop_linkused[linkid] = 1;
 
 		last_linkid = linkid;
 
 		cfpkt_add_trail(pkt, &linkid, 1);
-		spin_unlock(&ctrl->loop_linkid_lock);
+		spin_unlock_bh(&ctrl->loop_linkid_lock);
 		cfpkt_peek_head(pkt, &linktype, 1);
 		if (linktype ==  CFCTRL_SRV_UTIL) {
 			tmp = 0x01;
@@ -629,10 +617,10 @@ found:
 		break;
 
 	case CFCTRL_CMD_LINK_DESTROY:
-		spin_lock(&ctrl->loop_linkid_lock);
+		spin_lock_bh(&ctrl->loop_linkid_lock);
 		cfpkt_peek_head(pkt, &linkid, 1);
 		ctrl->loop_linkused[linkid] = 0;
-		spin_unlock(&ctrl->loop_linkid_lock);
+		spin_unlock_bh(&ctrl->loop_linkid_lock);
 		break;
 	default:
 		break;
diff --git a/net/caif/cfdgml.c b/net/caif/cfdgml.c
index 27dab26ad3b..0382dec84fd 100644
--- a/net/caif/cfdgml.c
+++ b/net/caif/cfdgml.c
@@ -13,6 +13,7 @@
 #include <net/caif/cfsrvl.h>
 #include <net/caif/cfpkt.h>
 
+
 #define container_obj(layr) ((struct cfsrvl *) layr)
 
 #define DGM_CMD_BIT  0x80
@@ -83,6 +84,7 @@ static int cfdgml_receive(struct cflayer *layr, struct cfpkt *pkt)
 
 static int cfdgml_transmit(struct cflayer *layr, struct cfpkt *pkt)
 {
+	u8 packet_type;
 	u32 zero = 0;
 	struct caif_payload_info *info;
 	struct cfsrvl *service = container_obj(layr);
@@ -94,7 +96,9 @@ static int cfdgml_transmit(struct cflayer *layr, struct cfpkt *pkt)
 	if (cfpkt_getlen(pkt) > DGM_MTU)
 		return -EMSGSIZE;
 
-	cfpkt_add_head(pkt, &zero, 4);
+	cfpkt_add_head(pkt, &zero, 3);
+	packet_type = 0x08; /* B9 set - UNCLASSIFIED */
+	cfpkt_add_head(pkt, &packet_type, 1);
 
 	/* Add info for MUX-layer to route the packet out. */
 	info = cfpkt_info(pkt);
@@ -104,10 +108,5 @@ static int cfdgml_transmit(struct cflayer *layr, struct cfpkt *pkt)
 	 */
 	info->hdr_len = 4;
 	info->dev_info = &service->dev_info;
-	ret = layr->dn->transmit(layr->dn, pkt);
-	if (ret < 0) {
-		u32 tmp32;
-		cfpkt_extr_head(pkt, &tmp32, 4);
-	}
-	return ret;
+	return layr->dn->transmit(layr->dn, pkt);
 }
diff --git a/net/caif/cffrml.c b/net/caif/cffrml.c
index a445043931a..04204b20271 100644
--- a/net/caif/cffrml.c
+++ b/net/caif/cffrml.c
@@ -12,6 +12,7 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/crc-ccitt.h>
+#include <linux/netdevice.h>
 #include <net/caif/caif_layer.h>
 #include <net/caif/cfpkt.h>
 #include <net/caif/cffrml.h>
@@ -21,6 +22,7 @@
 struct cffrml {
 	struct cflayer layer;
 	bool dofcs;		/* !< FCS active */
+	int __percpu		*pcpu_refcnt;
 };
 
 static int cffrml_receive(struct cflayer *layr, struct cfpkt *pkt);
@@ -37,6 +39,12 @@ struct cflayer *cffrml_create(u16 phyid, bool use_fcs)
 		pr_warn("Out of memory\n");
 		return NULL;
 	}
+	this->pcpu_refcnt = alloc_percpu(int);
+	if (this->pcpu_refcnt == NULL) {
+		kfree(this);
+		return NULL;
+	}
+
 	caif_assert(offsetof(struct cffrml, layer) == 0);
 
 	memset(this, 0, sizeof(struct cflayer));
@@ -49,6 +57,13 @@ struct cflayer *cffrml_create(u16 phyid, bool use_fcs)
 	return (struct cflayer *) this;
 }
 
+void cffrml_free(struct cflayer *layer)
+{
+	struct cffrml *this = container_obj(layer);
+	free_percpu(this->pcpu_refcnt);
+	kfree(layer);
+}
+
 void cffrml_set_uplayer(struct cflayer *this, struct cflayer *up)
 {
 	this->up = up;
@@ -112,6 +127,13 @@ static int cffrml_receive(struct cflayer *layr, struct cfpkt *pkt)
 		cfpkt_destroy(pkt);
 		return -EPROTO;
 	}
+
+	if (layr->up == NULL) {
+		pr_err("Layr up is missing!\n");
+		cfpkt_destroy(pkt);
+		return -EINVAL;
+	}
+
 	return layr->up->receive(layr->up, pkt);
 }
 
@@ -120,7 +142,6 @@ static int cffrml_transmit(struct cflayer *layr, struct cfpkt *pkt)
 	int tmp;
 	u16 chks;
 	u16 len;
-	int ret;
 	struct cffrml *this = container_obj(layr);
 	if (this->dofcs) {
 		chks = cfpkt_iterate(pkt, cffrml_checksum, 0xffff);
@@ -135,19 +156,44 @@ static int cffrml_transmit(struct cflayer *layr, struct cfpkt *pkt)
 	cfpkt_info(pkt)->hdr_len += 2;
 	if (cfpkt_erroneous(pkt)) {
 		pr_err("Packet is erroneous!\n");
+		cfpkt_destroy(pkt);
 		return -EPROTO;
 	}
-	ret = layr->dn->transmit(layr->dn, pkt);
-	if (ret < 0) {
-		/* Remove header on faulty packet. */
-		cfpkt_extr_head(pkt, &tmp, 2);
+
+	if (layr->dn == NULL) {
+		cfpkt_destroy(pkt);
+		return -ENODEV;
+
 	}
-	return ret;
+	return layr->dn->transmit(layr->dn, pkt);
 }
 
 static void cffrml_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
 					int phyid)
 {
-	if (layr->up->ctrlcmd)
+	if (layr->up && layr->up->ctrlcmd)
 		layr->up->ctrlcmd(layr->up, ctrl, layr->id);
 }
+
+void cffrml_put(struct cflayer *layr)
+{
+	struct cffrml *this = container_obj(layr);
+	if (layr != NULL && this->pcpu_refcnt != NULL)
+		irqsafe_cpu_dec(*this->pcpu_refcnt);
+}
+
+void cffrml_hold(struct cflayer *layr)
+{
+	struct cffrml *this = container_obj(layr);
+	if (layr != NULL && this->pcpu_refcnt != NULL)
+		irqsafe_cpu_inc(*this->pcpu_refcnt);
+}
+
+int cffrml_refcnt_read(struct cflayer *layr)
+{
+	int i, refcnt = 0;
+	struct cffrml *this = container_obj(layr);
+	for_each_possible_cpu(i)
+		refcnt += *per_cpu_ptr(this->pcpu_refcnt, i);
+	return refcnt;
+}
diff --git a/net/caif/cfmuxl.c b/net/caif/cfmuxl.c
index 46f34b2e047..2a56df7e0a4 100644
--- a/net/caif/cfmuxl.c
+++ b/net/caif/cfmuxl.c
@@ -9,6 +9,7 @@
 #include <linux/stddef.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/rculist.h>
 #include <net/caif/cfpkt.h>
 #include <net/caif/cfmuxl.h>
 #include <net/caif/cfsrvl.h>
@@ -64,66 +65,31 @@ struct cflayer *cfmuxl_create(void)
 int cfmuxl_set_uplayer(struct cflayer *layr, struct cflayer *up, u8 linkid)
 {
 	struct cfmuxl *muxl = container_obj(layr);
-	spin_lock(&muxl->receive_lock);
-	cfsrvl_get(up);
-	list_add(&up->node, &muxl->srvl_list);
-	spin_unlock(&muxl->receive_lock);
-	return 0;
-}
-
-bool cfmuxl_is_phy_inuse(struct cflayer *layr, u8 phyid)
-{
-	struct list_head *node;
-	struct cflayer *layer;
-	struct cfmuxl *muxl = container_obj(layr);
-	bool match = false;
-	spin_lock(&muxl->receive_lock);
-
-	list_for_each(node, &muxl->srvl_list) {
-		layer = list_entry(node, struct cflayer, node);
-		if (cfsrvl_phyid_match(layer, phyid)) {
-			match = true;
-			break;
-		}
-
-	}
-	spin_unlock(&muxl->receive_lock);
-	return match;
-}
 
-u8 cfmuxl_get_phyid(struct cflayer *layr, u8 channel_id)
-{
-	struct cflayer *up;
-	int phyid;
-	struct cfmuxl *muxl = container_obj(layr);
-	spin_lock(&muxl->receive_lock);
-	up = get_up(muxl, channel_id);
-	if (up != NULL)
-		phyid = cfsrvl_getphyid(up);
-	else
-		phyid = 0;
-	spin_unlock(&muxl->receive_lock);
-	return phyid;
+	spin_lock_bh(&muxl->receive_lock);
+	list_add_rcu(&up->node, &muxl->srvl_list);
+	spin_unlock_bh(&muxl->receive_lock);
+	return 0;
 }
 
 int cfmuxl_set_dnlayer(struct cflayer *layr, struct cflayer *dn, u8 phyid)
 {
 	struct cfmuxl *muxl = (struct cfmuxl *) layr;
-	spin_lock(&muxl->transmit_lock);
-	list_add(&dn->node, &muxl->frml_list);
-	spin_unlock(&muxl->transmit_lock);
+
+	spin_lock_bh(&muxl->transmit_lock);
+	list_add_rcu(&dn->node, &muxl->frml_list);
+	spin_unlock_bh(&muxl->transmit_lock);
 	return 0;
 }
 
 static struct cflayer *get_from_id(struct list_head *list, u16 id)
 {
-	struct list_head *node;
-	struct cflayer *layer;
-	list_for_each(node, list) {
-		layer = list_entry(node, struct cflayer, node);
-		if (layer->id == id)
-			return layer;
+	struct cflayer *lyr;
+	list_for_each_entry_rcu(lyr, list, node) {
+		if (lyr->id == id)
+			return lyr;
 	}
+
 	return NULL;
 }
 
@@ -131,41 +97,45 @@ struct cflayer *cfmuxl_remove_dnlayer(struct cflayer *layr, u8 phyid)
 {
 	struct cfmuxl *muxl = container_obj(layr);
 	struct cflayer *dn;
-	spin_lock(&muxl->transmit_lock);
-	memset(muxl->dn_cache, 0, sizeof(muxl->dn_cache));
+	int idx = phyid % DN_CACHE_SIZE;
+
+	spin_lock_bh(&muxl->transmit_lock);
+	rcu_assign_pointer(muxl->dn_cache[idx], NULL);
 	dn = get_from_id(&muxl->frml_list, phyid);
-	if (dn == NULL) {
-		spin_unlock(&muxl->transmit_lock);
-		return NULL;
-	}
-	list_del(&dn->node);
+	if (dn == NULL)
+		goto out;
+
+	list_del_rcu(&dn->node);
 	caif_assert(dn != NULL);
-	spin_unlock(&muxl->transmit_lock);
+out:
+	spin_unlock_bh(&muxl->transmit_lock);
 	return dn;
 }
 
-/* Invariant: lock is taken */
 static struct cflayer *get_up(struct cfmuxl *muxl, u16 id)
 {
 	struct cflayer *up;
 	int idx = id % UP_CACHE_SIZE;
-	up = muxl->up_cache[idx];
+	up = rcu_dereference(muxl->up_cache[idx]);
 	if (up == NULL || up->id != id) {
+		spin_lock_bh(&muxl->receive_lock);
 		up = get_from_id(&muxl->srvl_list, id);
-		muxl->up_cache[idx] = up;
+		rcu_assign_pointer(muxl->up_cache[idx], up);
+		spin_unlock_bh(&muxl->receive_lock);
 	}
 	return up;
 }
 
-/* Invariant: lock is taken */
 static struct cflayer *get_dn(struct cfmuxl *muxl, struct dev_info *dev_info)
 {
 	struct cflayer *dn;
 	int idx = dev_info->id % DN_CACHE_SIZE;
-	dn = muxl->dn_cache[idx];
+	dn = rcu_dereference(muxl->dn_cache[idx]);
 	if (dn == NULL || dn->id != dev_info->id) {
+		spin_lock_bh(&muxl->transmit_lock);
 		dn = get_from_id(&muxl->frml_list, dev_info->id);
-		muxl->dn_cache[idx] = dn;
+		rcu_assign_pointer(muxl->dn_cache[idx], dn);
+		spin_unlock_bh(&muxl->transmit_lock);
 	}
 	return dn;
 }
@@ -174,15 +144,17 @@ struct cflayer *cfmuxl_remove_uplayer(struct cflayer *layr, u8 id)
 {
 	struct cflayer *up;
 	struct cfmuxl *muxl = container_obj(layr);
-	spin_lock(&muxl->receive_lock);
-	up = get_up(muxl, id);
+	int idx = id % UP_CACHE_SIZE;
+
+	spin_lock_bh(&muxl->receive_lock);
+	up = get_from_id(&muxl->srvl_list, id);
 	if (up == NULL)
 		goto out;
-	memset(muxl->up_cache, 0, sizeof(muxl->up_cache));
-	list_del(&up->node);
-	cfsrvl_put(up);
+
+	rcu_assign_pointer(muxl->up_cache[idx], NULL);
+	list_del_rcu(&up->node);
 out:
-	spin_unlock(&muxl->receive_lock);
+	spin_unlock_bh(&muxl->receive_lock);
 	return up;
 }
 
@@ -197,58 +169,78 @@ static int cfmuxl_receive(struct cflayer *layr, struct cfpkt *pkt)
 		cfpkt_destroy(pkt);
 		return -EPROTO;
 	}
-
-	spin_lock(&muxl->receive_lock);
+	rcu_read_lock();
 	up = get_up(muxl, id);
-	spin_unlock(&muxl->receive_lock);
+
 	if (up == NULL) {
-		pr_info("Received data on unknown link ID = %d (0x%x) up == NULL",
-			id, id);
+		pr_debug("Received data on unknown link ID = %d (0x%x)"
+			" up == NULL", id, id);
 		cfpkt_destroy(pkt);
 		/*
 		 * Don't return ERROR, since modem misbehaves and sends out
 		 * flow on before linksetup response.
 		 */
+
+		rcu_read_unlock();
 		return /* CFGLU_EPROT; */ 0;
 	}
+
+	/* We can't hold rcu_lock during receive, so take a ref count instead */
 	cfsrvl_get(up);
+	rcu_read_unlock();
+
 	ret = up->receive(up, pkt);
+
 	cfsrvl_put(up);
 	return ret;
 }
 
 static int cfmuxl_transmit(struct cflayer *layr, struct cfpkt *pkt)
 {
-	int ret;
 	struct cfmuxl *muxl = container_obj(layr);
+	int err;
 	u8 linkid;
 	struct cflayer *dn;
 	struct caif_payload_info *info = cfpkt_info(pkt);
-	dn = get_dn(muxl, cfpkt_info(pkt)->dev_info);
+	BUG_ON(!info);
+
+	rcu_read_lock();
+
+	dn = get_dn(muxl, info->dev_info);
 	if (dn == NULL) {
-		pr_warn("Send data on unknown phy ID = %d (0x%x)\n",
+		pr_debug("Send data on unknown phy ID = %d (0x%x)\n",
 			info->dev_info->id, info->dev_info->id);
+		rcu_read_unlock();
+		cfpkt_destroy(pkt);
 		return -ENOTCONN;
 	}
+
 	info->hdr_len += 1;
 	linkid = info->channel_id;
 	cfpkt_add_head(pkt, &linkid, 1);
-	ret = dn->transmit(dn, pkt);
-	/* Remove MUX protocol header upon error. */
-	if (ret < 0)
-		cfpkt_extr_head(pkt, &linkid, 1);
-	return ret;
+
+	/* We can't hold rcu_lock during receive, so take a ref count instead */
+	cffrml_hold(dn);
+
+	rcu_read_unlock();
+
+	err = dn->transmit(dn, pkt);
+
+	cffrml_put(dn);
+	return err;
 }
 
 static void cfmuxl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
 				int phyid)
 {
 	struct cfmuxl *muxl = container_obj(layr);
-	struct list_head *node;
 	struct cflayer *layer;
-	list_for_each(node, &muxl->srvl_list) {
-		layer = list_entry(node, struct cflayer, node);
-		if (cfsrvl_phyid_match(layer, phyid))
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(layer, &muxl->srvl_list, node) {
+		if (cfsrvl_phyid_match(layer, phyid) && layer->ctrlcmd)
+			/* NOTE: ctrlcmd is not allowed to block */
 			layer->ctrlcmd(layer, ctrl, phyid);
 	}
+	rcu_read_unlock();
 }
diff --git a/net/caif/cfpkt_skbuff.c b/net/caif/cfpkt_skbuff.c
index d7e865e2ff6..75d4bfae1a7 100644
--- a/net/caif/cfpkt_skbuff.c
+++ b/net/caif/cfpkt_skbuff.c
@@ -42,22 +42,22 @@ struct cfpkt_priv_data {
 	bool erronous;
 };
 
-inline struct cfpkt_priv_data *cfpkt_priv(struct cfpkt *pkt)
+static inline struct cfpkt_priv_data *cfpkt_priv(struct cfpkt *pkt)
 {
 	return (struct cfpkt_priv_data *) pkt->skb.cb;
 }
 
-inline bool is_erronous(struct cfpkt *pkt)
+static inline bool is_erronous(struct cfpkt *pkt)
 {
 	return cfpkt_priv(pkt)->erronous;
 }
 
-inline struct sk_buff *pkt_to_skb(struct cfpkt *pkt)
+static inline struct sk_buff *pkt_to_skb(struct cfpkt *pkt)
 {
 	return &pkt->skb;
 }
 
-inline struct cfpkt *skb_to_pkt(struct sk_buff *skb)
+static inline struct cfpkt *skb_to_pkt(struct sk_buff *skb)
 {
 	return (struct cfpkt *) skb;
 }
@@ -97,21 +97,20 @@ inline struct cfpkt *cfpkt_create(u16 len)
 {
 	return cfpkt_create_pfx(len + PKT_POSTFIX, PKT_PREFIX);
 }
-EXPORT_SYMBOL(cfpkt_create);
 
 void cfpkt_destroy(struct cfpkt *pkt)
 {
 	struct sk_buff *skb = pkt_to_skb(pkt);
 	kfree_skb(skb);
 }
-EXPORT_SYMBOL(cfpkt_destroy);
+
 
 inline bool cfpkt_more(struct cfpkt *pkt)
 {
 	struct sk_buff *skb = pkt_to_skb(pkt);
 	return skb->len > 0;
 }
-EXPORT_SYMBOL(cfpkt_more);
+
 
 int cfpkt_peek_head(struct cfpkt *pkt, void *data, u16 len)
 {
@@ -123,7 +122,6 @@ int cfpkt_peek_head(struct cfpkt *pkt, void *data, u16 len)
 	return !cfpkt_extr_head(pkt, data, len) &&
 	    !cfpkt_add_head(pkt, data, len);
 }
-EXPORT_SYMBOL(cfpkt_peek_head);
 
 int cfpkt_extr_head(struct cfpkt *pkt, void *data, u16 len)
 {
@@ -148,7 +146,6 @@ int cfpkt_extr_head(struct cfpkt *pkt, void *data, u16 len)
 	memcpy(data, from, len);
 	return 0;
 }
-EXPORT_SYMBOL(cfpkt_extr_head);
 
 int cfpkt_extr_trail(struct cfpkt *pkt, void *dta, u16 len)
 {
@@ -171,13 +168,13 @@ int cfpkt_extr_trail(struct cfpkt *pkt, void *dta, u16 len)
 	memcpy(data, from, len);
 	return 0;
 }
-EXPORT_SYMBOL(cfpkt_extr_trail);
+
 
 int cfpkt_pad_trail(struct cfpkt *pkt, u16 len)
 {
 	return cfpkt_add_body(pkt, NULL, len);
 }
-EXPORT_SYMBOL(cfpkt_pad_trail);
+
 
 int cfpkt_add_body(struct cfpkt *pkt, const void *data, u16 len)
 {
@@ -226,13 +223,11 @@ int cfpkt_add_body(struct cfpkt *pkt, const void *data, u16 len)
 		memcpy(to, data, len);
 	return 0;
 }
-EXPORT_SYMBOL(cfpkt_add_body);
 
 inline int cfpkt_addbdy(struct cfpkt *pkt, u8 data)
 {
 	return cfpkt_add_body(pkt, &data, 1);
 }
-EXPORT_SYMBOL(cfpkt_addbdy);
 
 int cfpkt_add_head(struct cfpkt *pkt, const void *data2, u16 len)
 {
@@ -259,20 +254,20 @@ int cfpkt_add_head(struct cfpkt *pkt, const void *data2, u16 len)
 	memcpy(to, data, len);
 	return 0;
 }
-EXPORT_SYMBOL(cfpkt_add_head);
+
 
 inline int cfpkt_add_trail(struct cfpkt *pkt, const void *data, u16 len)
 {
 	return cfpkt_add_body(pkt, data, len);
 }
-EXPORT_SYMBOL(cfpkt_add_trail);
+
 
 inline u16 cfpkt_getlen(struct cfpkt *pkt)
 {
 	struct sk_buff *skb = pkt_to_skb(pkt);
 	return skb->len;
 }
-EXPORT_SYMBOL(cfpkt_getlen);
+
 
 inline u16 cfpkt_iterate(struct cfpkt *pkt,
 			    u16 (*iter_func)(u16, void *, u16),
@@ -290,7 +285,7 @@ inline u16 cfpkt_iterate(struct cfpkt *pkt,
 	}
 	return iter_func(data, pkt->skb.data, cfpkt_getlen(pkt));
 }
-EXPORT_SYMBOL(cfpkt_iterate);
+
 
 int cfpkt_setlen(struct cfpkt *pkt, u16 len)
 {
@@ -315,18 +310,6 @@ int cfpkt_setlen(struct cfpkt *pkt, u16 len)
 
 	return cfpkt_getlen(pkt);
 }
-EXPORT_SYMBOL(cfpkt_setlen);
-
-struct cfpkt *cfpkt_create_uplink(const unsigned char *data, unsigned int len)
-{
-	struct cfpkt *pkt = cfpkt_create_pfx(len + PKT_POSTFIX, PKT_PREFIX);
-	if (!pkt)
-		return NULL;
-	if (unlikely(data != NULL))
-		cfpkt_add_body(pkt, data, len);
-	return pkt;
-}
-EXPORT_SYMBOL(cfpkt_create_uplink);
 
 struct cfpkt *cfpkt_append(struct cfpkt *dstpkt,
 			     struct cfpkt *addpkt,
@@ -368,7 +351,6 @@ struct cfpkt *cfpkt_append(struct cfpkt *dstpkt,
 	dst->len += addlen;
 	return skb_to_pkt(dst);
 }
-EXPORT_SYMBOL(cfpkt_append);
 
 struct cfpkt *cfpkt_split(struct cfpkt *pkt, u16 pos)
 {
@@ -406,174 +388,13 @@ struct cfpkt *cfpkt_split(struct cfpkt *pkt, u16 pos)
 	skb2->len += len2nd;
 	return skb_to_pkt(skb2);
 }
-EXPORT_SYMBOL(cfpkt_split);
-
-char *cfpkt_log_pkt(struct cfpkt *pkt, char *buf, int buflen)
-{
-	struct sk_buff *skb = pkt_to_skb(pkt);
-	char *p = buf;
-	int i;
-
-	/*
-	 * Sanity check buffer length, it needs to be at least as large as
-	 * the header info: ~=50+ bytes
-	 */
-	if (buflen < 50)
-		return NULL;
-
-	snprintf(buf, buflen, "%s: pkt:%p len:%ld(%ld+%ld) {%ld,%ld} data: [",
-		is_erronous(pkt) ? "ERRONOUS-SKB" :
-		 (skb->data_len != 0 ? "COMPLEX-SKB" : "SKB"),
-		 skb,
-		 (long) skb->len,
-		 (long) (skb_tail_pointer(skb) - skb->data),
-		 (long) skb->data_len,
-		 (long) (skb->data - skb->head),
-		 (long) (skb_tail_pointer(skb) - skb->head));
-	p = buf + strlen(buf);
-
-	for (i = 0; i < skb_tail_pointer(skb) - skb->data && i < 300; i++) {
-		if (p > buf + buflen - 10) {
-			sprintf(p, "...");
-			p = buf + strlen(buf);
-			break;
-		}
-		sprintf(p, "%02x,", skb->data[i]);
-		p = buf + strlen(buf);
-	}
-	sprintf(p, "]\n");
-	return buf;
-}
-EXPORT_SYMBOL(cfpkt_log_pkt);
-
-int cfpkt_raw_append(struct cfpkt *pkt, void **buf, unsigned int buflen)
-{
-	struct sk_buff *skb = pkt_to_skb(pkt);
-	struct sk_buff *lastskb;
-
-	caif_assert(buf != NULL);
-	if (unlikely(is_erronous(pkt)))
-		return -EPROTO;
-	/* Make sure SKB is writable */
-	if (unlikely(skb_cow_data(skb, 0, &lastskb) < 0)) {
-		PKT_ERROR(pkt, "skb_cow_data failed\n");
-		return -EPROTO;
-	}
-
-	if (unlikely(skb_linearize(skb) != 0)) {
-		PKT_ERROR(pkt, "linearize failed\n");
-		return -EPROTO;
-	}
-
-	if (unlikely(skb_tailroom(skb) < buflen)) {
-		PKT_ERROR(pkt, "buffer too short - failed\n");
-		return -EPROTO;
-	}
-
-	*buf = skb_put(skb, buflen);
-	return 1;
-}
-EXPORT_SYMBOL(cfpkt_raw_append);
 
-int cfpkt_raw_extract(struct cfpkt *pkt, void **buf, unsigned int buflen)
-{
-	struct sk_buff *skb = pkt_to_skb(pkt);
-
-	caif_assert(buf != NULL);
-	if (unlikely(is_erronous(pkt)))
-		return -EPROTO;
-
-	if (unlikely(buflen > skb->len)) {
-		PKT_ERROR(pkt, "buflen too large - failed\n");
-		return -EPROTO;
-	}
-
-	if (unlikely(buflen > skb_headlen(skb))) {
-		if (unlikely(skb_linearize(skb) != 0)) {
-			PKT_ERROR(pkt, "linearize failed\n");
-			return -EPROTO;
-		}
-	}
-
-	*buf = skb->data;
-	skb_pull(skb, buflen);
-
-	return 1;
-}
-EXPORT_SYMBOL(cfpkt_raw_extract);
-
-inline bool cfpkt_erroneous(struct cfpkt *pkt)
+bool cfpkt_erroneous(struct cfpkt *pkt)
 {
 	return cfpkt_priv(pkt)->erronous;
 }
-EXPORT_SYMBOL(cfpkt_erroneous);
-
-struct cfpktq *cfpktq_create(void)
-{
-	struct cfpktq *q = kmalloc(sizeof(struct cfpktq), GFP_ATOMIC);
-	if (!q)
-		return NULL;
-	skb_queue_head_init(&q->head);
-	atomic_set(&q->count, 0);
-	spin_lock_init(&q->lock);
-	return q;
-}
-EXPORT_SYMBOL(cfpktq_create);
-
-void cfpkt_queue(struct cfpktq *pktq, struct cfpkt *pkt, unsigned short prio)
-{
-	atomic_inc(&pktq->count);
-	spin_lock(&pktq->lock);
-	skb_queue_tail(&pktq->head, pkt_to_skb(pkt));
-	spin_unlock(&pktq->lock);
-
-}
-EXPORT_SYMBOL(cfpkt_queue);
-
-struct cfpkt *cfpkt_qpeek(struct cfpktq *pktq)
-{
-	struct cfpkt *tmp;
-	spin_lock(&pktq->lock);
-	tmp = skb_to_pkt(skb_peek(&pktq->head));
-	spin_unlock(&pktq->lock);
-	return tmp;
-}
-EXPORT_SYMBOL(cfpkt_qpeek);
-
-struct cfpkt *cfpkt_dequeue(struct cfpktq *pktq)
-{
-	struct cfpkt *pkt;
-	spin_lock(&pktq->lock);
-	pkt = skb_to_pkt(skb_dequeue(&pktq->head));
-	if (pkt) {
-		atomic_dec(&pktq->count);
-		caif_assert(atomic_read(&pktq->count) >= 0);
-	}
-	spin_unlock(&pktq->lock);
-	return pkt;
-}
-EXPORT_SYMBOL(cfpkt_dequeue);
-
-int cfpkt_qcount(struct cfpktq *pktq)
-{
-	return atomic_read(&pktq->count);
-}
-EXPORT_SYMBOL(cfpkt_qcount);
-
-struct cfpkt *cfpkt_clone_release(struct cfpkt *pkt)
-{
-	struct cfpkt *clone;
-	clone  = skb_to_pkt(skb_clone(pkt_to_skb(pkt), GFP_ATOMIC));
-	/* Free original packet. */
-	cfpkt_destroy(pkt);
-	if (!clone)
-		return NULL;
-	return clone;
-}
-EXPORT_SYMBOL(cfpkt_clone_release);
 
 struct caif_payload_info *cfpkt_info(struct cfpkt *pkt)
 {
 	return (struct caif_payload_info *)&pkt_to_skb(pkt)->cb;
 }
-EXPORT_SYMBOL(cfpkt_info);
diff --git a/net/caif/cfrfml.c b/net/caif/cfrfml.c
index e2fb5fa7579..0deabb44005 100644
--- a/net/caif/cfrfml.c
+++ b/net/caif/cfrfml.c
@@ -31,9 +31,9 @@ struct cfrfml {
 	spinlock_t sync;
 };
 
-static void cfrfml_release(struct kref *kref)
+static void cfrfml_release(struct cflayer *layer)
 {
-	struct cfsrvl *srvl = container_of(kref, struct cfsrvl, ref);
+	struct cfsrvl *srvl = container_of(layer, struct cfsrvl, layer);
 	struct cfrfml *rfml = container_obj(&srvl->layer);
 
 	if (rfml->incomplete_frm)
diff --git a/net/caif/cfserl.c b/net/caif/cfserl.c
index 8303fe3ebf8..2715c84cfa8 100644
--- a/net/caif/cfserl.c
+++ b/net/caif/cfserl.c
@@ -179,15 +179,10 @@ static int cfserl_receive(struct cflayer *l, struct cfpkt *newpkt)
 static int cfserl_transmit(struct cflayer *layer, struct cfpkt *newpkt)
 {
 	struct cfserl *layr = container_obj(layer);
-	int ret;
 	u8 tmp8 = CFSERL_STX;
 	if (layr->usestx)
 		cfpkt_add_head(newpkt, &tmp8, 1);
-	ret = layer->dn->transmit(layer->dn, newpkt);
-	if (ret < 0)
-		cfpkt_extr_head(newpkt, &tmp8, 1);
-
-	return ret;
+	return layer->dn->transmit(layer->dn, newpkt);
 }
 
 static void cfserl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
diff --git a/net/caif/cfsrvl.c b/net/caif/cfsrvl.c
index ab5e542526b..535a1e72b36 100644
--- a/net/caif/cfsrvl.c
+++ b/net/caif/cfsrvl.c
@@ -10,6 +10,7 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <net/caif/caif_layer.h>
 #include <net/caif/cfsrvl.h>
 #include <net/caif/cfpkt.h>
@@ -27,8 +28,8 @@ static void cfservl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
 {
 	struct cfsrvl *service = container_obj(layr);
 
-	caif_assert(layr->up != NULL);
-	caif_assert(layr->up->ctrlcmd != NULL);
+	if (layr->up == NULL || layr->up->ctrlcmd == NULL)
+		return;
 
 	switch (ctrl) {
 	case CAIF_CTRLCMD_INIT_RSP:
@@ -151,14 +152,9 @@ static int cfservl_modemcmd(struct cflayer *layr, enum caif_modemcmd ctrl)
 	return -EINVAL;
 }
 
-void cfservl_destroy(struct cflayer *layer)
+static void cfsrvl_release(struct cflayer *layer)
 {
-	kfree(layer);
-}
-
-void cfsrvl_release(struct kref *kref)
-{
-	struct cfsrvl *service = container_of(kref, struct cfsrvl, ref);
+	struct cfsrvl *service = container_of(layer, struct cfsrvl, layer);
 	kfree(service);
 }
 
@@ -178,10 +174,8 @@ void cfsrvl_init(struct cfsrvl *service,
 	service->dev_info = *dev_info;
 	service->supports_flowctrl = supports_flowctrl;
 	service->release = cfsrvl_release;
-	kref_init(&service->ref);
 }
 
-
 bool cfsrvl_ready(struct cfsrvl *service, int *err)
 {
 	if (service->open && service->modem_flow_on && service->phy_flow_on)
@@ -194,6 +188,7 @@ bool cfsrvl_ready(struct cfsrvl *service, int *err)
 	*err = -EAGAIN;
 	return false;
 }
+
 u8 cfsrvl_getphyid(struct cflayer *layer)
 {
 	struct cfsrvl *servl = container_obj(layer);
@@ -205,3 +200,26 @@ bool cfsrvl_phyid_match(struct cflayer *layer, int phyid)
 	struct cfsrvl *servl = container_obj(layer);
 	return servl->dev_info.id == phyid;
 }
+
+void caif_free_client(struct cflayer *adap_layer)
+{
+	struct cfsrvl *servl;
+	if (adap_layer == NULL || adap_layer->dn == NULL)
+		return;
+	servl = container_obj(adap_layer->dn);
+	servl->release(&servl->layer);
+}
+EXPORT_SYMBOL(caif_free_client);
+
+void caif_client_register_refcnt(struct cflayer *adapt_layer,
+					void (*hold)(struct cflayer *lyr),
+					void (*put)(struct cflayer *lyr))
+{
+	struct cfsrvl *service;
+	service = container_of(adapt_layer->dn, struct cfsrvl, layer);
+
+	WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL);
+	service->hold = hold;
+	service->put = put;
+}
+EXPORT_SYMBOL(caif_client_register_refcnt);
diff --git a/net/caif/cfutill.c b/net/caif/cfutill.c
index 315c0d60136..98e027db18e 100644
--- a/net/caif/cfutill.c
+++ b/net/caif/cfutill.c
@@ -100,10 +100,5 @@ static int cfutill_transmit(struct cflayer *layr, struct cfpkt *pkt)
 	 */
 	info->hdr_len = 1;
 	info->dev_info = &service->dev_info;
-	ret = layr->dn->transmit(layr->dn, pkt);
-	if (ret < 0) {
-		u32 tmp32;
-		cfpkt_extr_head(pkt, &tmp32, 4);
-	}
-	return ret;
+	return layr->dn->transmit(layr->dn, pkt);
 }
diff --git a/net/caif/cfveil.c b/net/caif/cfveil.c
index c3b1dec4acf..3ec83fbc288 100644
--- a/net/caif/cfveil.c
+++ b/net/caif/cfveil.c
@@ -82,13 +82,14 @@ static int cfvei_transmit(struct cflayer *layr, struct cfpkt *pkt)
 	int ret;
 	struct cfsrvl *service = container_obj(layr);
 	if (!cfsrvl_ready(service, &ret))
-		return ret;
+		goto err;
 	caif_assert(layr->dn != NULL);
 	caif_assert(layr->dn->transmit != NULL);
 
 	if (cfpkt_add_head(pkt, &tmp, 1) < 0) {
 		pr_err("Packet is erroneous!\n");
-		return -EPROTO;
+		ret = -EPROTO;
+		goto err;
 	}
 
 	/* Add info-> for MUX-layer to route the packet out. */
@@ -96,8 +97,8 @@ static int cfvei_transmit(struct cflayer *layr, struct cfpkt *pkt)
 	info->channel_id = service->layer.id;
 	info->hdr_len = 1;
 	info->dev_info = &service->dev_info;
-	ret = layr->dn->transmit(layr->dn, pkt);
-	if (ret < 0)
-		cfpkt_extr_head(pkt, &tmp, 1);
+	return layr->dn->transmit(layr->dn, pkt);
+err:
+	cfpkt_destroy(pkt);
 	return ret;
 }
diff --git a/net/caif/cfvidl.c b/net/caif/cfvidl.c
index bf6fef2a0ef..b2f5989ad45 100644
--- a/net/caif/cfvidl.c
+++ b/net/caif/cfvidl.c
@@ -60,8 +60,5 @@ static int cfvidl_transmit(struct cflayer *layr, struct cfpkt *pkt)
 	info = cfpkt_info(pkt);
 	info->channel_id = service->layer.id;
 	info->dev_info = &service->dev_info;
-	ret = layr->dn->transmit(layr->dn, pkt);
-	if (ret < 0)
-		cfpkt_extr_head(pkt, &videoheader, 4);
-	return ret;
+	return layr->dn->transmit(layr->dn, pkt);
 }
diff --git a/net/caif/chnl_net.c b/net/caif/chnl_net.c
index 6008d6dc18a..649ebacaf6b 100644
--- a/net/caif/chnl_net.c
+++ b/net/caif/chnl_net.c
@@ -20,7 +20,6 @@
 #include <linux/caif/if_caif.h>
 #include <net/rtnetlink.h>
 #include <net/caif/caif_layer.h>
-#include <net/caif/cfcnfg.h>
 #include <net/caif/cfpkt.h>
 #include <net/caif/caif_dev.h>
 
@@ -84,10 +83,11 @@ static int chnl_recv_cb(struct cflayer *layr, struct cfpkt *pkt)
 	if (!priv)
 		return -EINVAL;
 
+	skb = (struct sk_buff *) cfpkt_tonative(pkt);
+
 	/* Get length of CAIF packet. */
-	pktlen = cfpkt_getlen(pkt);
+	pktlen = skb->len;
 
-	skb = (struct sk_buff *) cfpkt_tonative(pkt);
 	/* Pass some minimum information and
 	 * send the packet to the net stack.
 	 */
@@ -153,6 +153,18 @@ static void close_work(struct work_struct *work)
 }
 static DECLARE_WORK(close_worker, close_work);
 
+static void chnl_hold(struct cflayer *lyr)
+{
+	struct chnl_net *priv = container_of(lyr, struct chnl_net, chnl);
+	dev_hold(priv->netdev);
+}
+
+static void chnl_put(struct cflayer *lyr)
+{
+	struct chnl_net *priv = container_of(lyr, struct chnl_net, chnl);
+	dev_put(priv->netdev);
+}
+
 static void chnl_flowctrl_cb(struct cflayer *layr, enum caif_ctrlcmd flow,
 				int phyid)
 {
@@ -190,6 +202,7 @@ static void chnl_flowctrl_cb(struct cflayer *layr, enum caif_ctrlcmd flow,
 		netif_wake_queue(priv->netdev);
 		break;
 	case CAIF_CTRLCMD_INIT_RSP:
+		caif_client_register_refcnt(&priv->chnl, chnl_hold, chnl_put);
 		priv->state = CAIF_CONNECTED;
 		priv->flowenabled = true;
 		netif_wake_queue(priv->netdev);
@@ -257,8 +270,9 @@ static int chnl_net_open(struct net_device *dev)
 
 	if (priv->state != CAIF_CONNECTING) {
 		priv->state = CAIF_CONNECTING;
-		result = caif_connect_client(&priv->conn_req, &priv->chnl,
-					&llifindex, &headroom, &tailroom);
+		result = caif_connect_client(dev_net(dev), &priv->conn_req,
+						&priv->chnl, &llifindex,
+						&headroom, &tailroom);
 		if (result != 0) {
 				pr_debug("err: "
 					 "Unable to register and open device,"
@@ -314,7 +328,7 @@ static int chnl_net_open(struct net_device *dev)
 
 	if (result == 0) {
 		pr_debug("connect timeout\n");
-		caif_disconnect_client(&priv->chnl);
+		caif_disconnect_client(dev_net(dev), &priv->chnl);
 		priv->state = CAIF_DISCONNECTED;
 		pr_debug("state disconnected\n");
 		result = -ETIMEDOUT;
@@ -330,7 +344,7 @@ static int chnl_net_open(struct net_device *dev)
 	return 0;
 
 error:
-	caif_disconnect_client(&priv->chnl);
+	caif_disconnect_client(dev_net(dev), &priv->chnl);
 	priv->state = CAIF_DISCONNECTED;
 	pr_debug("state disconnected\n");
 	return result;
@@ -344,7 +358,7 @@ static int chnl_net_stop(struct net_device *dev)
 	ASSERT_RTNL();
 	priv = netdev_priv(dev);
 	priv->state = CAIF_DISCONNECTED;
-	caif_disconnect_client(&priv->chnl);
+	caif_disconnect_client(dev_net(dev), &priv->chnl);
 	return 0;
 }
 
@@ -373,11 +387,18 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_start_xmit = chnl_net_start_xmit,
 };
 
+static void chnl_net_destructor(struct net_device *dev)
+{
+	struct chnl_net *priv = netdev_priv(dev);
+	caif_free_client(&priv->chnl);
+	free_netdev(dev);
+}
+
 static void ipcaif_net_setup(struct net_device *dev)
 {
 	struct chnl_net *priv;
 	dev->netdev_ops = &netdev_ops;
-	dev->destructor = free_netdev;
+	dev->destructor = chnl_net_destructor;
 	dev->flags |= IFF_NOARP;
 	dev->flags |= IFF_POINTOPOINT;
 	dev->mtu = GPRS_PDP_MTU;
@@ -391,7 +412,7 @@ static void ipcaif_net_setup(struct net_device *dev)
 	priv->conn_req.link_selector = CAIF_LINK_HIGH_BANDW;
 	priv->conn_req.priority = CAIF_PRIO_LOW;
 	/* Insert illegal value */
-	priv->conn_req.sockaddr.u.dgm.connection_id = -1;
+	priv->conn_req.sockaddr.u.dgm.connection_id = 0;
 	priv->flowenabled = false;
 
 	init_waitqueue_head(&priv->netmgmt_wq);
@@ -453,6 +474,10 @@ static int ipcaif_newlink(struct net *src_net, struct net_device *dev,
 		pr_warn("device rtml registration failed\n");
 	else
 		list_add(&caifdev->list_field, &chnl_net_list);
+
+	/* Take ifindex as connection-id if null */
+	if (caifdev->conn_req.sockaddr.u.dgm.connection_id == 0)
+		caifdev->conn_req.sockaddr.u.dgm.connection_id = dev->ifindex;
 	return ret;
 }
 
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 733d66f1b05..094fc5332d4 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -84,8 +84,8 @@ static DEFINE_SPINLOCK(can_rcvlists_lock);
 static struct kmem_cache *rcv_cache __read_mostly;
 
 /* table of registered CAN protocols */
-static struct can_proto *proto_tab[CAN_NPROTO] __read_mostly;
-static DEFINE_SPINLOCK(proto_tab_lock);
+static const struct can_proto *proto_tab[CAN_NPROTO] __read_mostly;
+static DEFINE_MUTEX(proto_tab_lock);
 
 struct timer_list can_stattimer;   /* timer for statistics update */
 struct s_stats    can_stats;       /* packet statistics */
@@ -115,11 +115,29 @@ static void can_sock_destruct(struct sock *sk)
 	skb_queue_purge(&sk->sk_receive_queue);
 }
 
+static const struct can_proto *can_get_proto(int protocol)
+{
+	const struct can_proto *cp;
+
+	rcu_read_lock();
+	cp = rcu_dereference(proto_tab[protocol]);
+	if (cp && !try_module_get(cp->prot->owner))
+		cp = NULL;
+	rcu_read_unlock();
+
+	return cp;
+}
+
+static inline void can_put_proto(const struct can_proto *cp)
+{
+	module_put(cp->prot->owner);
+}
+
 static int can_create(struct net *net, struct socket *sock, int protocol,
 		      int kern)
 {
 	struct sock *sk;
-	struct can_proto *cp;
+	const struct can_proto *cp;
 	int err = 0;
 
 	sock->state = SS_UNCONNECTED;
@@ -130,9 +148,12 @@ static int can_create(struct net *net, struct socket *sock, int protocol,
 	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
+	cp = can_get_proto(protocol);
+
 #ifdef CONFIG_MODULES
-	/* try to load protocol module kernel is modular */
-	if (!proto_tab[protocol]) {
+	if (!cp) {
+		/* try to load protocol module if kernel is modular */
+
 		err = request_module("can-proto-%d", protocol);
 
 		/*
@@ -143,22 +164,18 @@ static int can_create(struct net *net, struct socket *sock, int protocol,
 		if (err && printk_ratelimit())
 			printk(KERN_ERR "can: request_module "
 			       "(can-proto-%d) failed.\n", protocol);
+
+		cp = can_get_proto(protocol);
 	}
 #endif
 
-	spin_lock(&proto_tab_lock);
-	cp = proto_tab[protocol];
-	if (cp && !try_module_get(cp->prot->owner))
-		cp = NULL;
-	spin_unlock(&proto_tab_lock);
-
 	/* check for available protocol and correct usage */
 
 	if (!cp)
 		return -EPROTONOSUPPORT;
 
 	if (cp->type != sock->type) {
-		err = -EPROTONOSUPPORT;
+		err = -EPROTOTYPE;
 		goto errout;
 	}
 
@@ -183,7 +200,7 @@ static int can_create(struct net *net, struct socket *sock, int protocol,
 	}
 
  errout:
-	module_put(cp->prot->owner);
+	can_put_proto(cp);
 	return err;
 }
 
@@ -679,7 +696,7 @@ drop:
  *  -EBUSY  protocol already in use
  *  -ENOBUF if proto_register() fails
  */
-int can_proto_register(struct can_proto *cp)
+int can_proto_register(const struct can_proto *cp)
 {
 	int proto = cp->protocol;
 	int err = 0;
@@ -694,15 +711,16 @@ int can_proto_register(struct can_proto *cp)
 	if (err < 0)
 		return err;
 
-	spin_lock(&proto_tab_lock);
+	mutex_lock(&proto_tab_lock);
+
 	if (proto_tab[proto]) {
 		printk(KERN_ERR "can: protocol %d already registered\n",
 		       proto);
 		err = -EBUSY;
 	} else
-		proto_tab[proto] = cp;
+		rcu_assign_pointer(proto_tab[proto], cp);
 
-	spin_unlock(&proto_tab_lock);
+	mutex_unlock(&proto_tab_lock);
 
 	if (err < 0)
 		proto_unregister(cp->prot);
@@ -715,17 +733,16 @@ EXPORT_SYMBOL(can_proto_register);
  * can_proto_unregister - unregister CAN transport protocol
  * @cp: pointer to CAN protocol structure
  */
-void can_proto_unregister(struct can_proto *cp)
+void can_proto_unregister(const struct can_proto *cp)
 {
 	int proto = cp->protocol;
 
-	spin_lock(&proto_tab_lock);
-	if (!proto_tab[proto]) {
-		printk(KERN_ERR "BUG: can: protocol %d is not registered\n",
-		       proto);
-	}
-	proto_tab[proto] = NULL;
-	spin_unlock(&proto_tab_lock);
+	mutex_lock(&proto_tab_lock);
+	BUG_ON(proto_tab[proto] != cp);
+	rcu_assign_pointer(proto_tab[proto], NULL);
+	mutex_unlock(&proto_tab_lock);
+
+	synchronize_rcu();
 
 	proto_unregister(cp->prot);
 }
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 871a0ad5102..cced806098a 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -387,7 +387,7 @@ static void bcm_tx_timeout_tsklet(unsigned long data)
 }
 
 /*
- * bcm_tx_timeout_handler - performes cyclic CAN frame transmissions
+ * bcm_tx_timeout_handler - performs cyclic CAN frame transmissions
  */
 static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
 {
@@ -1427,9 +1427,14 @@ static int bcm_init(struct sock *sk)
 static int bcm_release(struct socket *sock)
 {
 	struct sock *sk = sock->sk;
-	struct bcm_sock *bo = bcm_sk(sk);
+	struct bcm_sock *bo;
 	struct bcm_op *op, *next;
 
+	if (sk == NULL)
+		return 0;
+
+	bo = bcm_sk(sk);
+
 	/* remove bcm_ops, timer, rx_unregister(), etc. */
 
 	unregister_netdevice_notifier(&bo->notifier);
@@ -1596,7 +1601,7 @@ static struct proto bcm_proto __read_mostly = {
 	.init       = bcm_init,
 };
 
-static struct can_proto bcm_can_proto __read_mostly = {
+static const struct can_proto bcm_can_proto = {
 	.type       = SOCK_DGRAM,
 	.protocol   = CAN_BCM,
 	.ops        = &bcm_ops,
diff --git a/net/can/raw.c b/net/can/raw.c
index 649acfa7c70..dea99a6e596 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -305,7 +305,12 @@ static int raw_init(struct sock *sk)
 static int raw_release(struct socket *sock)
 {
 	struct sock *sk = sock->sk;
-	struct raw_sock *ro = raw_sk(sk);
+	struct raw_sock *ro;
+
+	if (!sk)
+		return 0;
+
+	ro = raw_sk(sk);
 
 	unregister_netdevice_notifier(&ro->notifier);
 
@@ -769,7 +774,7 @@ static struct proto raw_proto __read_mostly = {
 	.init       = raw_init,
 };
 
-static struct can_proto raw_can_proto __read_mostly = {
+static const struct can_proto raw_can_proto = {
 	.type       = SOCK_RAW,
 	.protocol   = CAN_RAW,
 	.ops        = &raw_ops,
diff --git a/net/ceph/Kconfig b/net/ceph/Kconfig
index ad424049b0c..be683f2d401 100644
--- a/net/ceph/Kconfig
+++ b/net/ceph/Kconfig
@@ -4,6 +4,7 @@ config CEPH_LIB
 	select LIBCRC32C
 	select CRYPTO_AES
 	select CRYPTO
+	select KEYS
 	default n
 	help
 	  Choose Y or M here to include cephlib, which provides the
diff --git a/net/ceph/auth.c b/net/ceph/auth.c
index 549c1f43e1d..b4bf4ac090f 100644
--- a/net/ceph/auth.c
+++ b/net/ceph/auth.c
@@ -35,12 +35,12 @@ static int ceph_auth_init_protocol(struct ceph_auth_client *ac, int protocol)
 /*
  * setup, teardown.
  */
-struct ceph_auth_client *ceph_auth_init(const char *name, const char *secret)
+struct ceph_auth_client *ceph_auth_init(const char *name, const struct ceph_crypto_key *key)
 {
 	struct ceph_auth_client *ac;
 	int ret;
 
-	dout("auth_init name '%s' secret '%s'\n", name, secret);
+	dout("auth_init name '%s'\n", name);
 
 	ret = -ENOMEM;
 	ac = kzalloc(sizeof(*ac), GFP_NOFS);
@@ -52,8 +52,8 @@ struct ceph_auth_client *ceph_auth_init(const char *name, const char *secret)
 		ac->name = name;
 	else
 		ac->name = CEPH_AUTH_NAME_DEFAULT;
-	dout("auth_init name %s secret %s\n", ac->name, secret);
-	ac->secret = secret;
+	dout("auth_init name %s\n", ac->name);
+	ac->key = key;
 	return ac;
 
 out:
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index 7fd5dfcf6e1..1587dc6010c 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -662,14 +662,16 @@ int ceph_x_init(struct ceph_auth_client *ac)
 		goto out;
 
 	ret = -EINVAL;
-	if (!ac->secret) {
+	if (!ac->key) {
 		pr_err("no secret set (for auth_x protocol)\n");
 		goto out_nomem;
 	}
 
-	ret = ceph_crypto_key_unarmor(&xi->secret, ac->secret);
-	if (ret)
+	ret = ceph_crypto_key_clone(&xi->secret, ac->key);
+	if (ret < 0) {
+		pr_err("cannot clone key: %d\n", ret);
 		goto out_nomem;
+	}
 
 	xi->starting = true;
 	xi->ticket_handlers = RB_ROOT;
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 95f96ab94bb..132963abc26 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -5,6 +5,8 @@
 #include <linux/fs.h>
 #include <linux/inet.h>
 #include <linux/in6.h>
+#include <linux/key.h>
+#include <keys/ceph-type.h>
 #include <linux/module.h>
 #include <linux/mount.h>
 #include <linux/parser.h>
@@ -20,6 +22,7 @@
 #include <linux/ceph/decode.h>
 #include <linux/ceph/mon_client.h>
 #include <linux/ceph/auth.h>
+#include "crypto.h"
 
 
 
@@ -117,9 +120,29 @@ int ceph_compare_options(struct ceph_options *new_opt,
 	if (ret)
 		return ret;
 
-	ret = strcmp_null(opt1->secret, opt2->secret);
-	if (ret)
-		return ret;
+	if (opt1->key && !opt2->key)
+		return -1;
+	if (!opt1->key && opt2->key)
+		return 1;
+	if (opt1->key && opt2->key) {
+		if (opt1->key->type != opt2->key->type)
+			return -1;
+		if (opt1->key->created.tv_sec != opt2->key->created.tv_sec)
+			return -1;
+		if (opt1->key->created.tv_nsec != opt2->key->created.tv_nsec)
+			return -1;
+		if (opt1->key->len != opt2->key->len)
+			return -1;
+		if (opt1->key->key && !opt2->key->key)
+			return -1;
+		if (!opt1->key->key && opt2->key->key)
+			return 1;
+		if (opt1->key->key && opt2->key->key) {
+			ret = memcmp(opt1->key->key, opt2->key->key, opt1->key->len);
+			if (ret)
+				return ret;
+		}
+	}
 
 	/* any matching mon ip implies a match */
 	for (i = 0; i < opt1->num_mon; i++) {
@@ -176,6 +199,7 @@ enum {
 	Opt_fsid,
 	Opt_name,
 	Opt_secret,
+	Opt_key,
 	Opt_ip,
 	Opt_last_string,
 	/* string args above */
@@ -192,6 +216,7 @@ static match_table_t opt_tokens = {
 	{Opt_fsid, "fsid=%s"},
 	{Opt_name, "name=%s"},
 	{Opt_secret, "secret=%s"},
+	{Opt_key, "key=%s"},
 	{Opt_ip, "ip=%s"},
 	/* string args above */
 	{Opt_noshare, "noshare"},
@@ -203,11 +228,56 @@ void ceph_destroy_options(struct ceph_options *opt)
 {
 	dout("destroy_options %p\n", opt);
 	kfree(opt->name);
-	kfree(opt->secret);
+	if (opt->key) {
+		ceph_crypto_key_destroy(opt->key);
+		kfree(opt->key);
+	}
 	kfree(opt);
 }
 EXPORT_SYMBOL(ceph_destroy_options);
 
+/* get secret from key store */
+static int get_secret(struct ceph_crypto_key *dst, const char *name) {
+	struct key *ukey;
+	int key_err;
+	int err = 0;
+	struct ceph_crypto_key *ckey;
+
+	ukey = request_key(&key_type_ceph, name, NULL);
+	if (!ukey || IS_ERR(ukey)) {
+		/* request_key errors don't map nicely to mount(2)
+		   errors; don't even try, but still printk */
+		key_err = PTR_ERR(ukey);
+		switch (key_err) {
+		case -ENOKEY:
+			pr_warning("ceph: Mount failed due to key not found: %s\n", name);
+			break;
+		case -EKEYEXPIRED:
+			pr_warning("ceph: Mount failed due to expired key: %s\n", name);
+			break;
+		case -EKEYREVOKED:
+			pr_warning("ceph: Mount failed due to revoked key: %s\n", name);
+			break;
+		default:
+			pr_warning("ceph: Mount failed due to unknown key error"
+			       " %d: %s\n", key_err, name);
+		}
+		err = -EPERM;
+		goto out;
+	}
+
+	ckey = ukey->payload.data;
+	err = ceph_crypto_key_clone(dst, ckey);
+	if (err)
+		goto out_key;
+	/* pass through, err is 0 */
+
+out_key:
+	key_put(ukey);
+out:
+	return err;
+}
+
 int ceph_parse_options(struct ceph_options **popt, char *options,
 		       const char *dev_name, const char *dev_name_end,
 		       int (*parse_extra_token)(char *c, void *private),
@@ -295,9 +365,24 @@ int ceph_parse_options(struct ceph_options **popt, char *options,
 					      GFP_KERNEL);
 			break;
 		case Opt_secret:
-			opt->secret = kstrndup(argstr[0].from,
-						argstr[0].to-argstr[0].from,
-						GFP_KERNEL);
+		        opt->key = kzalloc(sizeof(*opt->key), GFP_KERNEL);
+			if (!opt->key) {
+				err = -ENOMEM;
+				goto out;
+			}
+			err = ceph_crypto_key_unarmor(opt->key, argstr[0].from);
+			if (err < 0)
+				goto out;
+			break;
+		case Opt_key:
+		        opt->key = kzalloc(sizeof(*opt->key), GFP_KERNEL);
+			if (!opt->key) {
+				err = -ENOMEM;
+				goto out;
+			}
+			err = get_secret(opt->key, argstr[0].from);
+			if (err < 0)
+				goto out;
 			break;
 
 			/* misc */
@@ -394,8 +479,8 @@ void ceph_destroy_client(struct ceph_client *client)
 	ceph_osdc_stop(&client->osdc);
 
 	/*
-	 * make sure mds and osd connections close out before destroying
-	 * the auth module, which is needed to free those connections'
+	 * make sure osd connections close out before destroying the
+	 * auth module, which is needed to free those connections'
 	 * ceph_authorizers.
 	 */
 	ceph_msgr_flush();
@@ -496,10 +581,14 @@ static int __init init_ceph_lib(void)
 	if (ret < 0)
 		goto out;
 
-	ret = ceph_msgr_init();
+	ret = ceph_crypto_init();
 	if (ret < 0)
 		goto out_debugfs;
 
+	ret = ceph_msgr_init();
+	if (ret < 0)
+		goto out_crypto;
+
 	pr_info("loaded (mon/osd proto %d/%d, osdmap %d/%d %d/%d)\n",
 		CEPH_MONC_PROTOCOL, CEPH_OSDC_PROTOCOL,
 		CEPH_OSDMAP_VERSION, CEPH_OSDMAP_VERSION_EXT,
@@ -507,6 +596,8 @@ static int __init init_ceph_lib(void)
 
 	return 0;
 
+out_crypto:
+	ceph_crypto_shutdown();
 out_debugfs:
 	ceph_debugfs_cleanup();
 out:
@@ -517,6 +608,7 @@ static void __exit exit_ceph_lib(void)
 {
 	dout("exit_ceph_lib\n");
 	ceph_msgr_exit();
+	ceph_crypto_shutdown();
 	ceph_debugfs_cleanup();
 }
 
diff --git a/net/ceph/crypto.c b/net/ceph/crypto.c
index 7b505b0c983..5a8009c9e0c 100644
--- a/net/ceph/crypto.c
+++ b/net/ceph/crypto.c
@@ -5,10 +5,23 @@
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 #include <crypto/hash.h>
+#include <linux/key-type.h>
 
+#include <keys/ceph-type.h>
 #include <linux/ceph/decode.h>
 #include "crypto.h"
 
+int ceph_crypto_key_clone(struct ceph_crypto_key *dst,
+			  const struct ceph_crypto_key *src)
+{
+	memcpy(dst, src, sizeof(struct ceph_crypto_key));
+	dst->key = kmalloc(src->len, GFP_NOFS);
+	if (!dst->key)
+		return -ENOMEM;
+	memcpy(dst->key, src->key, src->len);
+	return 0;
+}
+
 int ceph_crypto_key_encode(struct ceph_crypto_key *key, void **p, void *end)
 {
 	if (*p + sizeof(u16) + sizeof(key->created) +
@@ -410,3 +423,63 @@ int ceph_encrypt2(struct ceph_crypto_key *secret, void *dst, size_t *dst_len,
 		return -EINVAL;
 	}
 }
+
+int ceph_key_instantiate(struct key *key, const void *data, size_t datalen)
+{
+	struct ceph_crypto_key *ckey;
+	int ret;
+	void *p;
+
+	ret = -EINVAL;
+	if (datalen <= 0 || datalen > 32767 || !data)
+		goto err;
+
+	ret = key_payload_reserve(key, datalen);
+	if (ret < 0)
+		goto err;
+
+	ret = -ENOMEM;
+	ckey = kmalloc(sizeof(*ckey), GFP_KERNEL);
+	if (!ckey)
+		goto err;
+
+	/* TODO ceph_crypto_key_decode should really take const input */
+	p = (void*)data;
+	ret = ceph_crypto_key_decode(ckey, &p, (char*)data+datalen);
+	if (ret < 0)
+		goto err_ckey;
+
+	key->payload.data = ckey;
+	return 0;
+
+err_ckey:
+	kfree(ckey);
+err:
+	return ret;
+}
+
+int ceph_key_match(const struct key *key, const void *description)
+{
+	return strcmp(key->description, description) == 0;
+}
+
+void ceph_key_destroy(struct key *key) {
+	struct ceph_crypto_key *ckey = key->payload.data;
+
+	ceph_crypto_key_destroy(ckey);
+}
+
+struct key_type key_type_ceph = {
+	.name		= "ceph",
+	.instantiate	= ceph_key_instantiate,
+	.match		= ceph_key_match,
+	.destroy	= ceph_key_destroy,
+};
+
+int ceph_crypto_init(void) {
+	return register_key_type(&key_type_ceph);
+}
+
+void ceph_crypto_shutdown(void) {
+	unregister_key_type(&key_type_ceph);
+}
diff --git a/net/ceph/crypto.h b/net/ceph/crypto.h
index f9eccace592..1919d1550d7 100644
--- a/net/ceph/crypto.h
+++ b/net/ceph/crypto.h
@@ -19,6 +19,8 @@ static inline void ceph_crypto_key_destroy(struct ceph_crypto_key *key)
 	kfree(key->key);
 }
 
+extern int ceph_crypto_key_clone(struct ceph_crypto_key *dst,
+				 const struct ceph_crypto_key *src);
 extern int ceph_crypto_key_encode(struct ceph_crypto_key *key,
 				  void **p, void *end);
 extern int ceph_crypto_key_decode(struct ceph_crypto_key *key,
@@ -40,6 +42,8 @@ extern int ceph_encrypt2(struct ceph_crypto_key *secret,
 			 void *dst, size_t *dst_len,
 			 const void *src1, size_t src1_len,
 			 const void *src2, size_t src2_len);
+extern int ceph_crypto_init(void);
+extern void ceph_crypto_shutdown(void);
 
 /* armor.c */
 extern int ceph_armor(char *dst, const char *src, const char *end);
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 05f357828a2..e15a82ccc05 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -2267,6 +2267,19 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags)
 	m->more_to_follow = false;
 	m->pool = NULL;
 
+	/* middle */
+	m->middle = NULL;
+
+	/* data */
+	m->nr_pages = 0;
+	m->page_alignment = 0;
+	m->pages = NULL;
+	m->pagelist = NULL;
+	m->bio = NULL;
+	m->bio_iter = NULL;
+	m->bio_seg = 0;
+	m->trail = NULL;
+
 	/* front */
 	if (front_len) {
 		if (front_len > PAGE_CACHE_SIZE) {
@@ -2286,19 +2299,6 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags)
 	}
 	m->front.iov_len = front_len;
 
-	/* middle */
-	m->middle = NULL;
-
-	/* data */
-	m->nr_pages = 0;
-	m->page_alignment = 0;
-	m->pages = NULL;
-	m->pagelist = NULL;
-	m->bio = NULL;
-	m->bio_iter = NULL;
-	m->bio_seg = 0;
-	m->trail = NULL;
-
 	dout("ceph_msg_new %p front %d\n", m, front_len);
 	return m;
 
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 8a079399174..cbe31fa4550 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -759,7 +759,7 @@ int ceph_monc_init(struct ceph_mon_client *monc, struct ceph_client *cl)
 
 	/* authentication */
 	monc->auth = ceph_auth_init(cl->options->name,
-				    cl->options->secret);
+				    cl->options->key);
 	if (IS_ERR(monc->auth))
 		return PTR_ERR(monc->auth);
 	monc->auth->want_keys =
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 02212ed5085..6b5dda1cb5d 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -470,8 +470,8 @@ struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc,
 					 snapc, ops,
 					 use_mempool,
 					 GFP_NOFS, NULL, NULL);
-	if (IS_ERR(req))
-		return req;
+	if (!req)
+		return NULL;
 
 	/* calculate max write size */
 	calc_layout(osdc, vino, layout, off, plen, req, ops);
@@ -579,9 +579,15 @@ static void __kick_osd_requests(struct ceph_osd_client *osdc,
 
 	list_for_each_entry_safe(req, nreq, &osd->o_linger_requests,
 				 r_linger_osd) {
-		__unregister_linger_request(osdc, req);
+		/*
+		 * reregister request prior to unregistering linger so
+		 * that r_osd is preserved.
+		 */
+		BUG_ON(!list_empty(&req->r_req_lru_item));
 		__register_request(osdc, req);
-		list_move(&req->r_req_lru_item, &osdc->req_unsent);
+		list_add(&req->r_req_lru_item, &osdc->req_unsent);
+		list_add(&req->r_osd_item, &req->r_osd->o_requests);
+		__unregister_linger_request(osdc, req);
 		dout("requeued lingering %p tid %llu osd%d\n", req, req->r_tid,
 		     osd->o_osd);
 	}
@@ -798,7 +804,7 @@ static void __register_request(struct ceph_osd_client *osdc,
 	req->r_request->hdr.tid = cpu_to_le64(req->r_tid);
 	INIT_LIST_HEAD(&req->r_req_lru_item);
 
-	dout("register_request %p tid %lld\n", req, req->r_tid);
+	dout("__register_request %p tid %lld\n", req, req->r_tid);
 	__insert_request(osdc, req);
 	ceph_osdc_get_request(req);
 	osdc->num_requests++;
@@ -837,8 +843,7 @@ static void __unregister_request(struct ceph_osd_client *osdc,
 			dout("moving osd to %p lru\n", req->r_osd);
 			__move_osd_to_lru(osdc, req->r_osd);
 		}
-		if (list_empty(&req->r_osd_item) &&
-		    list_empty(&req->r_linger_item))
+		if (list_empty(&req->r_linger_item))
 			req->r_osd = NULL;
 	}
 
@@ -883,7 +888,8 @@ static void __unregister_linger_request(struct ceph_osd_client *osdc,
 			dout("moving osd to %p lru\n", req->r_osd);
 			__move_osd_to_lru(osdc, req->r_osd);
 		}
-		req->r_osd = NULL;
+		if (list_empty(&req->r_osd_item))
+			req->r_osd = NULL;
 	}
 }
 
@@ -917,7 +923,7 @@ EXPORT_SYMBOL(ceph_osdc_set_request_linger);
 /*
  * Pick an osd (the first 'up' osd in the pg), allocate the osd struct
  * (as needed), and set the request r_osd appropriately.  If there is
- * no up osd, set r_osd to NULL.  Move the request to the appropiate list
+ * no up osd, set r_osd to NULL.  Move the request to the appropriate list
  * (unsent, homeless) or leave on in-flight lru.
  *
  * Return 0 if unchanged, 1 if changed, or negative on error.
@@ -1602,11 +1608,11 @@ void handle_watch_notify(struct ceph_osd_client *osdc, struct ceph_msg *msg)
 	     cookie, ver, event);
 	if (event) {
 		event_work = kmalloc(sizeof(*event_work), GFP_NOIO);
-		INIT_WORK(&event_work->work, do_event_work);
 		if (!event_work) {
 			dout("ERROR: could not allocate event_work\n");
 			goto done_err;
 		}
+		INIT_WORK(&event_work->work, do_event_work);
 		event_work->event = event;
 		event_work->ver = ver;
 		event_work->notify_id = notify_id;
@@ -1672,7 +1678,7 @@ int ceph_osdc_start_request(struct ceph_osd_client *osdc,
 	if (req->r_sent == 0) {
 		rc = __map_request(osdc, req);
 		if (rc < 0)
-			return rc;
+			goto out_unlock;
 		if (req->r_osd == NULL) {
 			dout("send_request %p no up osds in pg\n", req);
 			ceph_monc_request_next_osdmap(&osdc->client->monc);
@@ -1689,6 +1695,8 @@ int ceph_osdc_start_request(struct ceph_osd_client *osdc,
 			}
 		}
 	}
+
+out_unlock:
 	mutex_unlock(&osdc->request_mutex);
 	up_read(&osdc->map_sem);
 	return rc;
diff --git a/net/compat.c b/net/compat.c
index 3649d589536..c578d9382e1 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -722,11 +722,11 @@ EXPORT_SYMBOL(compat_mc_getsockopt);
 
 /* Argument list sizes for compat_sys_socketcall */
 #define AL(x) ((x) * sizeof(u32))
-static unsigned char nas[20] = {
+static unsigned char nas[21] = {
 	AL(0), AL(3), AL(3), AL(3), AL(2), AL(3),
 	AL(3), AL(3), AL(4), AL(4), AL(4), AL(6),
 	AL(6), AL(2), AL(5), AL(5), AL(3), AL(3),
-	AL(4), AL(5)
+	AL(4), AL(5), AL(4)
 };
 #undef AL
 
@@ -735,6 +735,13 @@ asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, uns
 	return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
 }
 
+asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg,
+				    unsigned vlen, unsigned int flags)
+{
+	return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
+			      flags | MSG_CMSG_COMPAT);
+}
+
 asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags)
 {
 	return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
@@ -780,7 +787,7 @@ asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 	u32 a[6];
 	u32 a0, a1;
 
-	if (call < SYS_SOCKET || call > SYS_RECVMMSG)
+	if (call < SYS_SOCKET || call > SYS_SENDMMSG)
 		return -EINVAL;
 	if (copy_from_user(a, args, nas[call]))
 		return -EFAULT;
@@ -839,6 +846,9 @@ asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 	case SYS_SENDMSG:
 		ret = compat_sys_sendmsg(a0, compat_ptr(a1), a[2]);
 		break;
+	case SYS_SENDMMSG:
+		ret = compat_sys_sendmmsg(a0, compat_ptr(a1), a[2], a[3]);
+		break;
 	case SYS_RECVMSG:
 		ret = compat_sys_recvmsg(a0, compat_ptr(a1), a[2]);
 		break;
diff --git a/net/core/dev.c b/net/core/dev.c
index 3da9fb06d47..d94537914a7 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -948,7 +948,7 @@ int dev_alloc_name(struct net_device *dev, const char *name)
 }
 EXPORT_SYMBOL(dev_alloc_name);
 
-static int dev_get_valid_name(struct net_device *dev, const char *name, bool fmt)
+static int dev_get_valid_name(struct net_device *dev, const char *name)
 {
 	struct net *net;
 
@@ -958,7 +958,7 @@ static int dev_get_valid_name(struct net_device *dev, const char *name, bool fmt
 	if (!dev_valid_name(name))
 		return -EINVAL;
 
-	if (fmt && strchr(name, '%'))
+	if (strchr(name, '%'))
 		return dev_alloc_name(dev, name);
 	else if (__dev_get_by_name(net, name))
 		return -EEXIST;
@@ -995,7 +995,7 @@ int dev_change_name(struct net_device *dev, const char *newname)
 
 	memcpy(oldname, dev->name, IFNAMSIZ);
 
-	err = dev_get_valid_name(dev, newname, 1);
+	err = dev_get_valid_name(dev, newname);
 	if (err < 0)
 		return err;
 
@@ -1007,7 +1007,7 @@ rollback:
 	}
 
 	write_lock_bh(&dev_base_lock);
-	hlist_del(&dev->name_hlist);
+	hlist_del_rcu(&dev->name_hlist);
 	write_unlock_bh(&dev_base_lock);
 
 	synchronize_rcu();
@@ -1284,11 +1284,13 @@ static int dev_close_many(struct list_head *head)
  */
 int dev_close(struct net_device *dev)
 {
-	LIST_HEAD(single);
+	if (dev->flags & IFF_UP) {
+		LIST_HEAD(single);
 
-	list_add(&dev->unreg_list, &single);
-	dev_close_many(&single);
-	list_del(&single);
+		list_add(&dev->unreg_list, &single);
+		dev_close_many(&single);
+		list_del(&single);
+	}
 	return 0;
 }
 EXPORT_SYMBOL(dev_close);
@@ -1315,7 +1317,8 @@ void dev_disable_lro(struct net_device *dev)
 		return;
 
 	__ethtool_set_flags(dev, flags & ~ETH_FLAG_LRO);
-	WARN_ON(dev->features & NETIF_F_LRO);
+	if (unlikely(dev->features & NETIF_F_LRO))
+		netdev_WARN(dev, "failed to disable LRO!\n");
 }
 EXPORT_SYMBOL(dev_disable_lro);
 
@@ -2091,7 +2094,7 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
 		u32 features;
 
 		/*
-		 * If device doesnt need skb->dst, release it right now while
+		 * If device doesn't need skb->dst, release it right now while
 		 * its hot in this cpu cache
 		 */
 		if (dev->priv_flags & IFF_XMIT_DST_RELEASE)
@@ -2151,7 +2154,7 @@ gso:
 		nskb->next = NULL;
 
 		/*
-		 * If device doesnt need nskb->dst, release it right now while
+		 * If device doesn't need nskb->dst, release it right now while
 		 * its hot in this cpu cache
 		 */
 		if (dev->priv_flags & IFF_XMIT_DST_RELEASE)
@@ -2502,8 +2505,8 @@ static inline void ____napi_schedule(struct softnet_data *sd,
 __u32 __skb_get_rxhash(struct sk_buff *skb)
 {
 	int nhoff, hash = 0, poff;
-	struct ipv6hdr *ip6;
-	struct iphdr *ip;
+	const struct ipv6hdr *ip6;
+	const struct iphdr *ip;
 	u8 ip_proto;
 	u32 addr1, addr2, ihl;
 	union {
@@ -2518,7 +2521,7 @@ __u32 __skb_get_rxhash(struct sk_buff *skb)
 		if (!pskb_may_pull(skb, sizeof(*ip) + nhoff))
 			goto done;
 
-		ip = (struct iphdr *) (skb->data + nhoff);
+		ip = (const struct iphdr *) (skb->data + nhoff);
 		if (ip->frag_off & htons(IP_MF | IP_OFFSET))
 			ip_proto = 0;
 		else
@@ -2531,7 +2534,7 @@ __u32 __skb_get_rxhash(struct sk_buff *skb)
 		if (!pskb_may_pull(skb, sizeof(*ip6) + nhoff))
 			goto done;
 
-		ip6 = (struct ipv6hdr *) (skb->data + nhoff);
+		ip6 = (const struct ipv6hdr *) (skb->data + nhoff);
 		ip_proto = ip6->nexthdr;
 		addr1 = (__force u32) ip6->saddr.s6_addr32[3];
 		addr2 = (__force u32) ip6->daddr.s6_addr32[3];
@@ -2970,8 +2973,8 @@ EXPORT_SYMBOL_GPL(br_fdb_test_addr_hook);
  * when CONFIG_NET_CLS_ACT is? otherwise some useless instructions
  * a compare and 2 stores extra right now if we dont have it on
  * but have CONFIG_NET_CLS_ACT
- * NOTE: This doesnt stop any functionality; if you dont have
- * the ingress scheduler, you just cant add policies on ingress.
+ * NOTE: This doesn't stop any functionality; if you dont have
+ * the ingress scheduler, you just can't add policies on ingress.
  *
  */
 static int ing_filter(struct sk_buff *skb, struct netdev_queue *rxq)
@@ -3076,25 +3079,6 @@ void netdev_rx_handler_unregister(struct net_device *dev)
 }
 EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
 
-static void vlan_on_bond_hook(struct sk_buff *skb)
-{
-	/*
-	 * Make sure ARP frames received on VLAN interfaces stacked on
-	 * bonding interfaces still make their way to any base bonding
-	 * device that may have registered for a specific ptype.
-	 */
-	if (skb->dev->priv_flags & IFF_802_1Q_VLAN &&
-	    vlan_dev_real_dev(skb->dev)->priv_flags & IFF_BONDING &&
-	    skb->protocol == htons(ETH_P_ARP)) {
-		struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
-
-		if (!skb2)
-			return;
-		skb2->dev = vlan_dev_real_dev(skb->dev);
-		netif_rx(skb2);
-	}
-}
-
 static int __netif_receive_skb(struct sk_buff *skb)
 {
 	struct packet_type *ptype, *pt_prev;
@@ -3130,6 +3114,12 @@ another_round:
 
 	__this_cpu_inc(softnet_data.processed);
 
+	if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) {
+		skb = vlan_untag(skb);
+		if (unlikely(!skb))
+			goto out;
+	}
+
 #ifdef CONFIG_NET_CLS_ACT
 	if (skb->tc_verd & TC_NCLS) {
 		skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
@@ -3177,15 +3167,13 @@ ncls:
 			ret = deliver_skb(skb, pt_prev, orig_dev);
 			pt_prev = NULL;
 		}
-		if (vlan_hwaccel_do_receive(&skb)) {
+		if (vlan_do_receive(&skb)) {
 			ret = __netif_receive_skb(skb);
 			goto out;
 		} else if (unlikely(!skb))
 			goto out;
 	}
 
-	vlan_on_bond_hook(skb);
-
 	/* deliver only exact match when indicated */
 	null_or_dev = deliver_exact ? skb->dev : NULL;
 
@@ -3800,7 +3788,7 @@ static void net_rx_action(struct softirq_action *h)
 		 * with netpoll's poll_napi().  Only the entity which
 		 * obtains the lock and sees NAPI_STATE_SCHED set will
 		 * actually make the ->poll() call.  Therefore we avoid
-		 * accidently calling ->poll() when NAPI is not scheduled.
+		 * accidentally calling ->poll() when NAPI is not scheduled.
 		 */
 		work = 0;
 		if (test_bit(NAPI_STATE_SCHED, &n->state)) {
@@ -4510,6 +4498,30 @@ void dev_set_rx_mode(struct net_device *dev)
 }
 
 /**
+ *	dev_ethtool_get_settings - call device's ethtool_ops::get_settings()
+ *	@dev: device
+ *	@cmd: memory area for ethtool_ops::get_settings() result
+ *
+ *      The cmd arg is initialized properly (cleared and
+ *      ethtool_cmd::cmd field set to ETHTOOL_GSET).
+ *
+ *	Return device's ethtool_ops::get_settings() result value or
+ *	-EOPNOTSUPP when device doesn't expose
+ *	ethtool_ops::get_settings() operation.
+ */
+int dev_ethtool_get_settings(struct net_device *dev,
+			     struct ethtool_cmd *cmd)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+		return -EOPNOTSUPP;
+
+	memset(cmd, 0, sizeof(struct ethtool_cmd));
+	cmd->cmd = ETHTOOL_GSET;
+	return dev->ethtool_ops->get_settings(dev, cmd);
+}
+EXPORT_SYMBOL(dev_ethtool_get_settings);
+
+/**
  *	dev_get_flags - get flags reported to userspace
  *	@dev: device
  *
@@ -4773,7 +4785,7 @@ static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cm
 		 * is never reached
 		 */
 		WARN_ON(1);
-		err = -EINVAL;
+		err = -ENOTTY;
 		break;
 
 	}
@@ -5041,7 +5053,7 @@ int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg)
 		/* Set the per device memory buffer space.
 		 * Not applicable in our case */
 	case SIOCSIFLINK:
-		return -EINVAL;
+		return -ENOTTY;
 
 	/*
 	 *	Unknown or private ioctl.
@@ -5062,7 +5074,7 @@ int dev_ioctl(struct net *net, unsigned int cmd, void __user *arg)
 		/* Take care of Wireless Extensions */
 		if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST)
 			return wext_handle_ioctl(net, &ifr, cmd, arg);
-		return -EINVAL;
+		return -ENOTTY;
 	}
 }
 
@@ -5114,7 +5126,7 @@ static void rollback_registered_many(struct list_head *head)
 			list_del(&dev->unreg_list);
 			continue;
 		}
-
+		dev->dismantle = true;
 		BUG_ON(dev->reg_state != NETREG_REGISTERED);
 	}
 
@@ -5184,33 +5196,37 @@ u32 netdev_fix_features(struct net_device *dev, u32 features)
 	/* Fix illegal checksum combinations */
 	if ((features & NETIF_F_HW_CSUM) &&
 	    (features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
-		netdev_info(dev, "mixed HW and IP checksum settings.\n");
+		netdev_warn(dev, "mixed HW and IP checksum settings.\n");
 		features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM);
 	}
 
 	if ((features & NETIF_F_NO_CSUM) &&
 	    (features & (NETIF_F_HW_CSUM|NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
-		netdev_info(dev, "mixed no checksumming and other settings.\n");
+		netdev_warn(dev, "mixed no checksumming and other settings.\n");
 		features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM|NETIF_F_HW_CSUM);
 	}
 
 	/* Fix illegal SG+CSUM combinations. */
 	if ((features & NETIF_F_SG) &&
 	    !(features & NETIF_F_ALL_CSUM)) {
-		netdev_info(dev,
-			    "Dropping NETIF_F_SG since no checksum feature.\n");
+		netdev_dbg(dev,
+			"Dropping NETIF_F_SG since no checksum feature.\n");
 		features &= ~NETIF_F_SG;
 	}
 
 	/* TSO requires that SG is present as well. */
-	if ((features & NETIF_F_TSO) && !(features & NETIF_F_SG)) {
-		netdev_info(dev, "Dropping NETIF_F_TSO since no SG feature.\n");
-		features &= ~NETIF_F_TSO;
+	if ((features & NETIF_F_ALL_TSO) && !(features & NETIF_F_SG)) {
+		netdev_dbg(dev, "Dropping TSO features since no SG feature.\n");
+		features &= ~NETIF_F_ALL_TSO;
 	}
 
+	/* TSO ECN requires that TSO is present as well. */
+	if ((features & NETIF_F_ALL_TSO) == NETIF_F_TSO_ECN)
+		features &= ~NETIF_F_TSO_ECN;
+
 	/* Software GSO depends on SG. */
 	if ((features & NETIF_F_GSO) && !(features & NETIF_F_SG)) {
-		netdev_info(dev, "Dropping NETIF_F_GSO since no SG feature.\n");
+		netdev_dbg(dev, "Dropping NETIF_F_GSO since no SG feature.\n");
 		features &= ~NETIF_F_GSO;
 	}
 
@@ -5220,13 +5236,13 @@ u32 netdev_fix_features(struct net_device *dev, u32 features)
 		if (!((features & NETIF_F_GEN_CSUM) ||
 		    (features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))
 			    == (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
-			netdev_info(dev,
+			netdev_dbg(dev,
 				"Dropping NETIF_F_UFO since no checksum offload features.\n");
 			features &= ~NETIF_F_UFO;
 		}
 
 		if (!(features & NETIF_F_SG)) {
-			netdev_info(dev,
+			netdev_dbg(dev,
 				"Dropping NETIF_F_UFO since no NETIF_F_SG feature.\n");
 			features &= ~NETIF_F_UFO;
 		}
@@ -5236,11 +5252,13 @@ u32 netdev_fix_features(struct net_device *dev, u32 features)
 }
 EXPORT_SYMBOL(netdev_fix_features);
 
-void netdev_update_features(struct net_device *dev)
+int __netdev_update_features(struct net_device *dev)
 {
 	u32 features;
 	int err = 0;
 
+	ASSERT_RTNL();
+
 	features = netdev_get_wanted_features(dev);
 
 	if (dev->netdev_ops->ndo_fix_features)
@@ -5250,24 +5268,60 @@ void netdev_update_features(struct net_device *dev)
 	features = netdev_fix_features(dev, features);
 
 	if (dev->features == features)
-		return;
+		return 0;
 
-	netdev_info(dev, "Features changed: 0x%08x -> 0x%08x\n",
+	netdev_dbg(dev, "Features changed: 0x%08x -> 0x%08x\n",
 		dev->features, features);
 
 	if (dev->netdev_ops->ndo_set_features)
 		err = dev->netdev_ops->ndo_set_features(dev, features);
 
-	if (!err)
-		dev->features = features;
-	else if (err < 0)
+	if (unlikely(err < 0)) {
 		netdev_err(dev,
 			"set_features() failed (%d); wanted 0x%08x, left 0x%08x\n",
 			err, features, dev->features);
+		return -1;
+	}
+
+	if (!err)
+		dev->features = features;
+
+	return 1;
+}
+
+/**
+ *	netdev_update_features - recalculate device features
+ *	@dev: the device to check
+ *
+ *	Recalculate dev->features set and send notifications if it
+ *	has changed. Should be called after driver or hardware dependent
+ *	conditions might have changed that influence the features.
+ */
+void netdev_update_features(struct net_device *dev)
+{
+	if (__netdev_update_features(dev))
+		netdev_features_change(dev);
 }
 EXPORT_SYMBOL(netdev_update_features);
 
 /**
+ *	netdev_change_features - recalculate device features
+ *	@dev: the device to check
+ *
+ *	Recalculate dev->features set and send notifications even
+ *	if they have not changed. Should be called instead of
+ *	netdev_update_features() if also dev->vlan_features might
+ *	have changed to allow the changes to be propagated to stacked
+ *	VLAN devices.
+ */
+void netdev_change_features(struct net_device *dev)
+{
+	__netdev_update_features(dev);
+	netdev_features_change(dev);
+}
+EXPORT_SYMBOL(netdev_change_features);
+
+/**
  *	netif_stacked_transfer_operstate -	transfer operstate
  *	@rootdev: the root or lower level device to transfer state from
  *	@dev: the device to transfer operstate to
@@ -5383,6 +5437,10 @@ int register_netdevice(struct net_device *dev)
 
 	dev->iflink = -1;
 
+	ret = dev_get_valid_name(dev, dev->name);
+	if (ret < 0)
+		goto out;
+
 	/* Init, if this function is available */
 	if (dev->netdev_ops->ndo_init) {
 		ret = dev->netdev_ops->ndo_init(dev);
@@ -5393,10 +5451,6 @@ int register_netdevice(struct net_device *dev)
 		}
 	}
 
-	ret = dev_get_valid_name(dev, dev->name, 0);
-	if (ret)
-		goto err_uninit;
-
 	dev->ifindex = dev_new_index(net);
 	if (dev->iflink == -1)
 		dev->iflink = dev->ifindex;
@@ -5408,10 +5462,12 @@ int register_netdevice(struct net_device *dev)
 	dev->features |= NETIF_F_SOFT_FEATURES;
 	dev->wanted_features = dev->features & dev->hw_features;
 
-	/* Avoid warning from netdev_fix_features() for GSO without SG */
-	if (!(dev->wanted_features & NETIF_F_SG)) {
-		dev->wanted_features &= ~NETIF_F_GSO;
-		dev->features &= ~NETIF_F_GSO;
+	/* Turn on no cache copy if HW is doing checksum */
+	dev->hw_features |= NETIF_F_NOCACHE_COPY;
+	if ((dev->features & NETIF_F_ALL_CSUM) &&
+	    !(dev->features & NETIF_F_NO_CSUM)) {
+		dev->wanted_features |= NETIF_F_NOCACHE_COPY;
+		dev->features |= NETIF_F_NOCACHE_COPY;
 	}
 
 	/* Enable GRO and NETIF_F_HIGHDMA for vlans by default,
@@ -5430,7 +5486,7 @@ int register_netdevice(struct net_device *dev)
 		goto err_uninit;
 	dev->reg_state = NETREG_REGISTERED;
 
-	netdev_update_features(dev);
+	__netdev_update_features(dev);
 
 	/*
 	 *	Default initial state at registry is that the
@@ -5527,19 +5583,7 @@ int register_netdev(struct net_device *dev)
 	int err;
 
 	rtnl_lock();
-
-	/*
-	 * If the name is a format string the caller wants us to do a
-	 * name allocation.
-	 */
-	if (strchr(dev->name, '%')) {
-		err = dev_alloc_name(dev, dev->name);
-		if (err < 0)
-			goto out;
-	}
-
 	err = register_netdevice(dev);
-out:
 	rtnl_unlock();
 	return err;
 }
@@ -6021,7 +6065,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 		/* We get here if we can't use the current device name */
 		if (!pat)
 			goto out;
-		if (dev_get_valid_name(dev, pat, 1))
+		if (dev_get_valid_name(dev, pat) < 0)
 			goto out;
 	}
 
@@ -6153,29 +6197,20 @@ static int dev_cpu_callback(struct notifier_block *nfb,
  */
 u32 netdev_increment_features(u32 all, u32 one, u32 mask)
 {
-	/* If device needs checksumming, downgrade to it. */
-	if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM))
-		all ^= NETIF_F_NO_CSUM | (one & NETIF_F_ALL_CSUM);
-	else if (mask & NETIF_F_ALL_CSUM) {
-		/* If one device supports v4/v6 checksumming, set for all. */
-		if (one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM) &&
-		    !(all & NETIF_F_GEN_CSUM)) {
-			all &= ~NETIF_F_ALL_CSUM;
-			all |= one & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-		}
+	if (mask & NETIF_F_GEN_CSUM)
+		mask |= NETIF_F_ALL_CSUM;
+	mask |= NETIF_F_VLAN_CHALLENGED;
 
-		/* If one device supports hw checksumming, set for all. */
-		if (one & NETIF_F_GEN_CSUM && !(all & NETIF_F_GEN_CSUM)) {
-			all &= ~NETIF_F_ALL_CSUM;
-			all |= NETIF_F_HW_CSUM;
-		}
-	}
+	all |= one & (NETIF_F_ONE_FOR_ALL|NETIF_F_ALL_CSUM) & mask;
+	all &= one | ~NETIF_F_ALL_FOR_ALL;
 
-	one |= NETIF_F_ALL_CSUM;
+	/* If device needs checksumming, downgrade to it. */
+	if (all & (NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM))
+		all &= ~NETIF_F_NO_CSUM;
 
-	one |= all & NETIF_F_ONE_FOR_ALL;
-	all &= one | NETIF_F_LLTX | NETIF_F_GSO | NETIF_F_UFO;
-	all |= one & mask & NETIF_F_ONE_FOR_ALL;
+	/* If one device supports hw checksumming, set for all. */
+	if (all & NETIF_F_GEN_CSUM)
+		all &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_GEN_CSUM);
 
 	return all;
 }
@@ -6336,7 +6371,7 @@ static void __net_exit default_device_exit(struct net *net)
 		if (dev->rtnl_link_ops)
 			continue;
 
-		/* Push remaing network devices to init_net */
+		/* Push remaining network devices to init_net */
 		snprintf(fb_name, IFNAMSIZ, "dev%d", dev->ifindex);
 		err = dev_change_net_namespace(dev, &init_net, fb_name);
 		if (err) {
diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c
index 7b39f3ed2fd..e2e66939ed0 100644
--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -68,14 +68,6 @@ static int __hw_addr_add(struct netdev_hw_addr_list *list, unsigned char *addr,
 	return __hw_addr_add_ex(list, addr, addr_len, addr_type, false);
 }
 
-static void ha_rcu_free(struct rcu_head *head)
-{
-	struct netdev_hw_addr *ha;
-
-	ha = container_of(head, struct netdev_hw_addr, rcu_head);
-	kfree(ha);
-}
-
 static int __hw_addr_del_ex(struct netdev_hw_addr_list *list,
 			    unsigned char *addr, int addr_len,
 			    unsigned char addr_type, bool global)
@@ -94,7 +86,7 @@ static int __hw_addr_del_ex(struct netdev_hw_addr_list *list,
 			if (--ha->refcount)
 				return 0;
 			list_del_rcu(&ha->list);
-			call_rcu(&ha->rcu_head, ha_rcu_free);
+			kfree_rcu(ha, rcu_head);
 			list->count--;
 			return 0;
 		}
@@ -197,7 +189,7 @@ void __hw_addr_flush(struct netdev_hw_addr_list *list)
 
 	list_for_each_entry_safe(ha, tmp, &list->list, list) {
 		list_del_rcu(&ha->list);
-		call_rcu(&ha->rcu_head, ha_rcu_free);
+		kfree_rcu(ha, rcu_head);
 	}
 	list->count = 0;
 }
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 706502ff64a..7f36b38e060 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -207,14 +207,6 @@ static void trace_napi_poll_hit(void *ignore, struct napi_struct *napi)
 	rcu_read_unlock();
 }
 
-
-static void free_dm_hw_stat(struct rcu_head *head)
-{
-	struct dm_hw_stat_delta *n;
-	n = container_of(head, struct dm_hw_stat_delta, rcu);
-	kfree(n);
-}
-
 static int set_all_monitor_traces(int state)
 {
 	int rc = 0;
@@ -245,7 +237,7 @@ static int set_all_monitor_traces(int state)
 		list_for_each_entry_safe(new_stat, temp, &hw_stats_list, list) {
 			if (new_stat->dev == NULL) {
 				list_del_rcu(&new_stat->list);
-				call_rcu(&new_stat->rcu, free_dm_hw_stat);
+				kfree_rcu(new_stat, rcu);
 			}
 		}
 		break;
@@ -314,7 +306,7 @@ static int dropmon_net_event(struct notifier_block *ev_block,
 				new_stat->dev = NULL;
 				if (trace_state == TRACE_OFF) {
 					list_del_rcu(&new_stat->list);
-					call_rcu(&new_stat->rcu, free_dm_hw_stat);
+					kfree_rcu(new_stat, rcu);
 					break;
 				}
 			}
diff --git a/net/core/dst.c b/net/core/dst.c
index 91104d35de7..81a4fa1c95e 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -19,6 +19,7 @@
 #include <linux/types.h>
 #include <net/net_namespace.h>
 #include <linux/sched.h>
+#include <linux/prefetch.h>
 
 #include <net/dst.h>
 
@@ -33,9 +34,6 @@
  * 3) This list is guarded by a mutex,
  *    so that the gc_task and dst_dev_event() can be synchronized.
  */
-#if RT_CACHE_DEBUG >= 2
-static atomic_t			 dst_total = ATOMIC_INIT(0);
-#endif
 
 /*
  * We want to keep lock & list close together
@@ -69,10 +67,6 @@ static void dst_gc_task(struct work_struct *work)
 	unsigned long expires = ~0L;
 	struct dst_entry *dst, *next, head;
 	struct dst_entry *last = &head;
-#if RT_CACHE_DEBUG >= 2
-	ktime_t time_start = ktime_get();
-	struct timespec elapsed;
-#endif
 
 	mutex_lock(&dst_gc_mutex);
 	next = dst_busy_list;
@@ -146,15 +140,6 @@ loop:
 
 	spin_unlock_bh(&dst_garbage.lock);
 	mutex_unlock(&dst_gc_mutex);
-#if RT_CACHE_DEBUG >= 2
-	elapsed = ktime_to_timespec(ktime_sub(ktime_get(), time_start));
-	printk(KERN_DEBUG "dst_total: %d delayed: %d work_perf: %d"
-		" expires: %lu elapsed: %lu us\n",
-		atomic_read(&dst_total), delayed, work_performed,
-		expires,
-		elapsed.tv_sec * USEC_PER_SEC +
-		  elapsed.tv_nsec / NSEC_PER_USEC);
-#endif
 }
 
 int dst_discard(struct sk_buff *skb)
@@ -166,7 +151,8 @@ EXPORT_SYMBOL(dst_discard);
 
 const u32 dst_default_metrics[RTAX_MAX];
 
-void *dst_alloc(struct dst_ops *ops, int initial_ref)
+void *dst_alloc(struct dst_ops *ops, struct net_device *dev,
+		int initial_ref, int initial_obsolete, int flags)
 {
 	struct dst_entry *dst;
 
@@ -174,18 +160,36 @@ void *dst_alloc(struct dst_ops *ops, int initial_ref)
 		if (ops->gc(ops))
 			return NULL;
 	}
-	dst = kmem_cache_zalloc(ops->kmem_cachep, GFP_ATOMIC);
+	dst = kmem_cache_alloc(ops->kmem_cachep, GFP_ATOMIC);
 	if (!dst)
 		return NULL;
-	atomic_set(&dst->__refcnt, initial_ref);
+	dst->child = NULL;
+	dst->dev = dev;
+	if (dev)
+		dev_hold(dev);
 	dst->ops = ops;
-	dst->lastuse = jiffies;
-	dst->path = dst;
-	dst->input = dst->output = dst_discard;
 	dst_init_metrics(dst, dst_default_metrics, true);
-#if RT_CACHE_DEBUG >= 2
-	atomic_inc(&dst_total);
+	dst->expires = 0UL;
+	dst->path = dst;
+	dst->neighbour = NULL;
+	dst->hh = NULL;
+#ifdef CONFIG_XFRM
+	dst->xfrm = NULL;
+#endif
+	dst->input = dst_discard;
+	dst->output = dst_discard;
+	dst->error = 0;
+	dst->obsolete = initial_obsolete;
+	dst->header_len = 0;
+	dst->trailer_len = 0;
+#ifdef CONFIG_IP_ROUTE_CLASSID
+	dst->tclassid = 0;
 #endif
+	atomic_set(&dst->__refcnt, initial_ref);
+	dst->__use = 0;
+	dst->lastuse = jiffies;
+	dst->flags = flags;
+	dst->next = NULL;
 	dst_entries_add(ops, 1);
 	return dst;
 }
@@ -245,9 +249,6 @@ again:
 		dst->ops->destroy(dst);
 	if (dst->dev)
 		dev_put(dst->dev);
-#if RT_CACHE_DEBUG >= 2
-	atomic_dec(&dst_total);
-#endif
 	kmem_cache_free(dst->ops->kmem_cachep, dst);
 
 	dst = child;
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 74ead9eca12..84e7304532e 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -21,6 +21,8 @@
 #include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/sched.h>
 
 /*
  * Some useful ethtool_ops methods that're device independent.
@@ -317,7 +319,7 @@ static int ethtool_set_features(struct net_device *dev, void __user *useraddr)
 
 	dev->wanted_features &= ~features[0].valid;
 	dev->wanted_features |= features[0].valid & features[0].requested;
-	netdev_update_features(dev);
+	__netdev_update_features(dev);
 
 	if ((dev->wanted_features ^ dev->features) & features[0].valid)
 		ret |= ETHTOOL_F_WISH;
@@ -330,7 +332,7 @@ static const char netdev_features_strings[ETHTOOL_DEV_FEATURE_WORDS * 32][ETH_GS
 	/* NETIF_F_IP_CSUM */         "tx-checksum-ipv4",
 	/* NETIF_F_NO_CSUM */         "tx-checksum-unneeded",
 	/* NETIF_F_HW_CSUM */         "tx-checksum-ip-generic",
-	/* NETIF_F_IPV6_CSUM */       "tx_checksum-ipv6",
+	/* NETIF_F_IPV6_CSUM */       "tx-checksum-ipv6",
 	/* NETIF_F_HIGHDMA */         "highdma",
 	/* NETIF_F_FRAGLIST */        "tx-scatter-gather-fraglist",
 	/* NETIF_F_HW_VLAN_TX */      "tx-vlan-hw-insert",
@@ -359,8 +361,8 @@ static const char netdev_features_strings[ETHTOOL_DEV_FEATURE_WORDS * 32][ETH_GS
 	/* NETIF_F_NTUPLE */          "rx-ntuple-filter",
 	/* NETIF_F_RXHASH */          "rx-hashing",
 	/* NETIF_F_RXCSUM */          "rx-checksum",
-	"",
-	"",
+	/* NETIF_F_NOCACHE_COPY */    "tx-nocache-copy",
+	/* NETIF_F_LOOPBACK */        "loopback",
 };
 
 static int __ethtool_get_sset_count(struct net_device *dev, int sset)
@@ -499,7 +501,7 @@ static int ethtool_set_one_feature(struct net_device *dev,
 		else
 			dev->wanted_features &= ~mask;
 
-		netdev_update_features(dev);
+		__netdev_update_features(dev);
 		return 0;
 	}
 
@@ -544,14 +546,14 @@ int __ethtool_set_flags(struct net_device *dev, u32 data)
 	}
 
 	/* allow changing only bits set in hw_features */
-	changed = (data ^ dev->wanted_features) & flags_dup_features;
+	changed = (data ^ dev->features) & flags_dup_features;
 	if (changed & ~dev->hw_features)
 		return (changed & dev->hw_features) ? -EINVAL : -EOPNOTSUPP;
 
 	dev->wanted_features =
-		(dev->wanted_features & ~changed) | data;
+		(dev->wanted_features & ~changed) | (data & dev->hw_features);
 
-	netdev_update_features(dev);
+	__netdev_update_features(dev);
 
 	return 0;
 }
@@ -908,6 +910,9 @@ static noinline_for_stack int ethtool_set_rx_ntuple(struct net_device *dev,
 	struct ethtool_rx_ntuple_flow_spec_container *fsc = NULL;
 	int ret;
 
+	if (!ops->set_rx_ntuple)
+		return -EOPNOTSUPP;
+
 	if (!(dev->features & NETIF_F_NTUPLE))
 		return -EINVAL;
 
@@ -1441,6 +1446,35 @@ static int ethtool_set_ringparam(struct net_device *dev, void __user *useraddr)
 	return dev->ethtool_ops->set_ringparam(dev, &ringparam);
 }
 
+static noinline_for_stack int ethtool_get_channels(struct net_device *dev,
+						   void __user *useraddr)
+{
+	struct ethtool_channels channels = { .cmd = ETHTOOL_GCHANNELS };
+
+	if (!dev->ethtool_ops->get_channels)
+		return -EOPNOTSUPP;
+
+	dev->ethtool_ops->get_channels(dev, &channels);
+
+	if (copy_to_user(useraddr, &channels, sizeof(channels)))
+		return -EFAULT;
+	return 0;
+}
+
+static noinline_for_stack int ethtool_set_channels(struct net_device *dev,
+						   void __user *useraddr)
+{
+	struct ethtool_channels channels;
+
+	if (!dev->ethtool_ops->set_channels)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&channels, useraddr, sizeof(channels)))
+		return -EFAULT;
+
+	return dev->ethtool_ops->set_channels(dev, &channels);
+}
+
 static int ethtool_get_pauseparam(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_pauseparam pauseparam = { ETHTOOL_GPAUSEPARAM };
@@ -1618,14 +1652,60 @@ out:
 static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_value id;
+	static bool busy;
+	int rc;
 
-	if (!dev->ethtool_ops->phys_id)
+	if (!dev->ethtool_ops->set_phys_id)
 		return -EOPNOTSUPP;
 
+	if (busy)
+		return -EBUSY;
+
 	if (copy_from_user(&id, useraddr, sizeof(id)))
 		return -EFAULT;
 
-	return dev->ethtool_ops->phys_id(dev, id.data);
+	rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE);
+	if (rc < 0)
+		return rc;
+
+	/* Drop the RTNL lock while waiting, but prevent reentry or
+	 * removal of the device.
+	 */
+	busy = true;
+	dev_hold(dev);
+	rtnl_unlock();
+
+	if (rc == 0) {
+		/* Driver will handle this itself */
+		schedule_timeout_interruptible(
+			id.data ? (id.data * HZ) : MAX_SCHEDULE_TIMEOUT);
+	} else {
+		/* Driver expects to be called at twice the frequency in rc */
+		int n = rc * 2, i, interval = HZ / n;
+
+		/* Count down seconds */
+		do {
+			/* Count down iterations per second */
+			i = n;
+			do {
+				rtnl_lock();
+				rc = dev->ethtool_ops->set_phys_id(dev,
+				    (i & 1) ? ETHTOOL_ID_OFF : ETHTOOL_ID_ON);
+				rtnl_unlock();
+				if (rc)
+					break;
+				schedule_timeout_interruptible(interval);
+			} while (!signal_pending(current) && --i != 0);
+		} while (!signal_pending(current) &&
+			 (id.data == 0 || --id.data != 0));
+	}
+
+	rtnl_lock();
+	dev_put(dev);
+	busy = false;
+
+	(void)dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_INACTIVE);
+	return rc;
 }
 
 static int ethtool_get_stats(struct net_device *dev, void __user *useraddr)
@@ -1743,6 +1823,87 @@ static noinline_for_stack int ethtool_flash_device(struct net_device *dev,
 	return dev->ethtool_ops->flash_device(dev, &efl);
 }
 
+static int ethtool_set_dump(struct net_device *dev,
+			void __user *useraddr)
+{
+	struct ethtool_dump dump;
+
+	if (!dev->ethtool_ops->set_dump)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&dump, useraddr, sizeof(dump)))
+		return -EFAULT;
+
+	return dev->ethtool_ops->set_dump(dev, &dump);
+}
+
+static int ethtool_get_dump_flag(struct net_device *dev,
+				void __user *useraddr)
+{
+	int ret;
+	struct ethtool_dump dump;
+	const struct ethtool_ops *ops = dev->ethtool_ops;
+
+	if (!dev->ethtool_ops->get_dump_flag)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&dump, useraddr, sizeof(dump)))
+		return -EFAULT;
+
+	ret = ops->get_dump_flag(dev, &dump);
+	if (ret)
+		return ret;
+
+	if (copy_to_user(useraddr, &dump, sizeof(dump)))
+		return -EFAULT;
+	return 0;
+}
+
+static int ethtool_get_dump_data(struct net_device *dev,
+				void __user *useraddr)
+{
+	int ret;
+	__u32 len;
+	struct ethtool_dump dump, tmp;
+	const struct ethtool_ops *ops = dev->ethtool_ops;
+	void *data = NULL;
+
+	if (!dev->ethtool_ops->get_dump_data ||
+		!dev->ethtool_ops->get_dump_flag)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&dump, useraddr, sizeof(dump)))
+		return -EFAULT;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.cmd = ETHTOOL_GET_DUMP_FLAG;
+	ret = ops->get_dump_flag(dev, &tmp);
+	if (ret)
+		return ret;
+
+	len = (tmp.len > dump.len) ? dump.len : tmp.len;
+	if (!len)
+		return -EFAULT;
+
+	data = vzalloc(tmp.len);
+	if (!data)
+		return -ENOMEM;
+	ret = ops->get_dump_data(dev, &dump, data);
+	if (ret)
+		goto out;
+
+	if (copy_to_user(useraddr, &dump, sizeof(dump))) {
+		ret = -EFAULT;
+		goto out;
+	}
+	useraddr += offsetof(struct ethtool_dump, data);
+	if (copy_to_user(useraddr, data, len))
+		ret = -EFAULT;
+out:
+	vfree(data);
+	return ret;
+}
+
 /* The main entry point in this file.  Called from net/core/dev.c */
 
 int dev_ethtool(struct net *net, struct ifreq *ifr)
@@ -1953,6 +2114,21 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
 	case ETHTOOL_SGRO:
 		rc = ethtool_set_one_feature(dev, useraddr, ethcmd);
 		break;
+	case ETHTOOL_GCHANNELS:
+		rc = ethtool_get_channels(dev, useraddr);
+		break;
+	case ETHTOOL_SCHANNELS:
+		rc = ethtool_set_channels(dev, useraddr);
+		break;
+	case ETHTOOL_SET_DUMP:
+		rc = ethtool_set_dump(dev, useraddr);
+		break;
+	case ETHTOOL_GET_DUMP_FLAG:
+		rc = ethtool_get_dump_flag(dev, useraddr);
+		break;
+	case ETHTOOL_GET_DUMP_DATA:
+		rc = ethtool_get_dump_data(dev, useraddr);
+		break;
 	default:
 		rc = -EOPNOTSUPP;
 	}
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 8248ebb5891..3911586e12e 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -590,7 +590,8 @@ static int dump_rules(struct sk_buff *skb, struct netlink_callback *cb,
 	int idx = 0;
 	struct fib_rule *rule;
 
-	list_for_each_entry(rule, &ops->rules_list, list) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(rule, &ops->rules_list, list) {
 		if (idx < cb->args[1])
 			goto skip;
 
diff --git a/net/core/filter.c b/net/core/filter.c
index 232b1873bb2..0eb8c4466ea 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -39,65 +39,6 @@
 #include <linux/filter.h>
 #include <linux/reciprocal_div.h>
 
-enum {
-	BPF_S_RET_K = 1,
-	BPF_S_RET_A,
-	BPF_S_ALU_ADD_K,
-	BPF_S_ALU_ADD_X,
-	BPF_S_ALU_SUB_K,
-	BPF_S_ALU_SUB_X,
-	BPF_S_ALU_MUL_K,
-	BPF_S_ALU_MUL_X,
-	BPF_S_ALU_DIV_X,
-	BPF_S_ALU_AND_K,
-	BPF_S_ALU_AND_X,
-	BPF_S_ALU_OR_K,
-	BPF_S_ALU_OR_X,
-	BPF_S_ALU_LSH_K,
-	BPF_S_ALU_LSH_X,
-	BPF_S_ALU_RSH_K,
-	BPF_S_ALU_RSH_X,
-	BPF_S_ALU_NEG,
-	BPF_S_LD_W_ABS,
-	BPF_S_LD_H_ABS,
-	BPF_S_LD_B_ABS,
-	BPF_S_LD_W_LEN,
-	BPF_S_LD_W_IND,
-	BPF_S_LD_H_IND,
-	BPF_S_LD_B_IND,
-	BPF_S_LD_IMM,
-	BPF_S_LDX_W_LEN,
-	BPF_S_LDX_B_MSH,
-	BPF_S_LDX_IMM,
-	BPF_S_MISC_TAX,
-	BPF_S_MISC_TXA,
-	BPF_S_ALU_DIV_K,
-	BPF_S_LD_MEM,
-	BPF_S_LDX_MEM,
-	BPF_S_ST,
-	BPF_S_STX,
-	BPF_S_JMP_JA,
-	BPF_S_JMP_JEQ_K,
-	BPF_S_JMP_JEQ_X,
-	BPF_S_JMP_JGE_K,
-	BPF_S_JMP_JGE_X,
-	BPF_S_JMP_JGT_K,
-	BPF_S_JMP_JGT_X,
-	BPF_S_JMP_JSET_K,
-	BPF_S_JMP_JSET_X,
-	/* Ancillary data */
-	BPF_S_ANC_PROTOCOL,
-	BPF_S_ANC_PKTTYPE,
-	BPF_S_ANC_IFINDEX,
-	BPF_S_ANC_NLATTR,
-	BPF_S_ANC_NLATTR_NEST,
-	BPF_S_ANC_MARK,
-	BPF_S_ANC_QUEUE,
-	BPF_S_ANC_HATYPE,
-	BPF_S_ANC_RXHASH,
-	BPF_S_ANC_CPU,
-};
-
 /* No hurry in this branch */
 static void *__load_pointer(const struct sk_buff *skb, int k, unsigned int size)
 {
@@ -145,7 +86,7 @@ int sk_filter(struct sock *sk, struct sk_buff *skb)
 	rcu_read_lock();
 	filter = rcu_dereference(sk->sk_filter);
 	if (filter) {
-		unsigned int pkt_len = sk_run_filter(skb, filter->insns);
+		unsigned int pkt_len = SK_RUN_FILTER(filter, skb);
 
 		err = pkt_len ? pskb_trim(skb, pkt_len) : -EPERM;
 	}
@@ -425,7 +366,7 @@ EXPORT_SYMBOL(sk_run_filter);
  * As we dont want to clear mem[] array for each packet going through
  * sk_run_filter(), we check that filter loaded by user never try to read
  * a cell if not previously written, and we check all branches to be sure
- * a malicious user doesnt try to abuse us.
+ * a malicious user doesn't try to abuse us.
  */
 static int check_load_and_stores(struct sock_filter *filter, int flen)
 {
@@ -638,6 +579,7 @@ void sk_filter_release_rcu(struct rcu_head *rcu)
 {
 	struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
 
+	bpf_jit_free(fp);
 	kfree(fp);
 }
 EXPORT_SYMBOL(sk_filter_release_rcu);
@@ -672,6 +614,7 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 
 	atomic_set(&fp->refcnt, 1);
 	fp->len = fprog->len;
+	fp->bpf_func = sk_run_filter;
 
 	err = sk_chk_filter(fp->insns, fp->len);
 	if (err) {
@@ -679,6 +622,8 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 		return err;
 	}
 
+	bpf_jit_compile(fp);
+
 	old_fp = rcu_dereference_protected(sk->sk_filter,
 					   sock_owned_by_user(sk));
 	rcu_assign_pointer(sk->sk_filter, fp);
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 7c2373321b7..43b03dd71e8 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -249,13 +249,6 @@ int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
 }
 EXPORT_SYMBOL(gen_new_estimator);
 
-static void __gen_kill_estimator(struct rcu_head *head)
-{
-	struct gen_estimator *e = container_of(head,
-					struct gen_estimator, e_rcu);
-	kfree(e);
-}
-
 /**
  * gen_kill_estimator - remove a rate estimator
  * @bstats: basic statistics
@@ -279,7 +272,7 @@ void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
 		write_unlock(&est_lock);
 
 		list_del_rcu(&e->list);
-		call_rcu(&e->e_rcu, __gen_kill_estimator);
+		kfree_rcu(e, e_rcu);
 	}
 	spin_unlock_bh(&est_tree_lock);
 }
diff --git a/net/core/link_watch.c b/net/core/link_watch.c
index 01a1101b593..a7b34213186 100644
--- a/net/core/link_watch.c
+++ b/net/core/link_watch.c
@@ -129,7 +129,7 @@ static void linkwatch_schedule_work(int urgent)
 	if (!cancel_delayed_work(&linkwatch_work))
 		return;
 
-	/* Otherwise we reschedule it again for immediate exection. */
+	/* Otherwise we reschedule it again for immediate execution. */
 	schedule_delayed_work(&linkwatch_work, 0);
 }
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 5ceb257e860..11b98bc2aa8 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -28,6 +28,7 @@
 static const char fmt_hex[] = "%#x\n";
 static const char fmt_long_hex[] = "%#lx\n";
 static const char fmt_dec[] = "%d\n";
+static const char fmt_udec[] = "%u\n";
 static const char fmt_ulong[] = "%lu\n";
 static const char fmt_u64[] = "%llu\n";
 
@@ -145,13 +146,10 @@ static ssize_t show_speed(struct device *dev,
 	if (!rtnl_trylock())
 		return restart_syscall();
 
-	if (netif_running(netdev) &&
-	    netdev->ethtool_ops &&
-	    netdev->ethtool_ops->get_settings) {
-		struct ethtool_cmd cmd = { ETHTOOL_GSET };
-
-		if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
-			ret = sprintf(buf, fmt_dec, ethtool_cmd_speed(&cmd));
+	if (netif_running(netdev)) {
+		struct ethtool_cmd cmd;
+		if (!dev_ethtool_get_settings(netdev, &cmd))
+			ret = sprintf(buf, fmt_udec, ethtool_cmd_speed(&cmd));
 	}
 	rtnl_unlock();
 	return ret;
@@ -166,13 +164,11 @@ static ssize_t show_duplex(struct device *dev,
 	if (!rtnl_trylock())
 		return restart_syscall();
 
-	if (netif_running(netdev) &&
-	    netdev->ethtool_ops &&
-	    netdev->ethtool_ops->get_settings) {
-		struct ethtool_cmd cmd = { ETHTOOL_GSET };
-
-		if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
-			ret = sprintf(buf, "%s\n", cmd.duplex ? "full" : "half");
+	if (netif_running(netdev)) {
+		struct ethtool_cmd cmd;
+		if (!dev_ethtool_get_settings(netdev, &cmd))
+			ret = sprintf(buf, "%s\n",
+				      cmd.duplex ? "full" : "half");
 	}
 	rtnl_unlock();
 	return ret;
@@ -565,13 +561,6 @@ static ssize_t show_rps_map(struct netdev_rx_queue *queue,
 	return len;
 }
 
-static void rps_map_release(struct rcu_head *rcu)
-{
-	struct rps_map *map = container_of(rcu, struct rps_map, rcu);
-
-	kfree(map);
-}
-
 static ssize_t store_rps_map(struct netdev_rx_queue *queue,
 		      struct rx_queue_attribute *attribute,
 		      const char *buf, size_t len)
@@ -619,7 +608,7 @@ static ssize_t store_rps_map(struct netdev_rx_queue *queue,
 	spin_unlock(&rps_map_lock);
 
 	if (old_map)
-		call_rcu(&old_map->rcu, rps_map_release);
+		kfree_rcu(old_map, rcu);
 
 	free_cpumask_var(mask);
 	return len;
@@ -728,7 +717,7 @@ static void rx_queue_release(struct kobject *kobj)
 	map = rcu_dereference_raw(queue->rps_map);
 	if (map) {
 		RCU_INIT_POINTER(queue->rps_map, NULL);
-		call_rcu(&map->rcu, rps_map_release);
+		kfree_rcu(map, rcu);
 	}
 
 	flow_table = rcu_dereference_raw(queue->rps_flow_table);
@@ -898,21 +887,6 @@ static ssize_t show_xps_map(struct netdev_queue *queue,
 	return len;
 }
 
-static void xps_map_release(struct rcu_head *rcu)
-{
-	struct xps_map *map = container_of(rcu, struct xps_map, rcu);
-
-	kfree(map);
-}
-
-static void xps_dev_maps_release(struct rcu_head *rcu)
-{
-	struct xps_dev_maps *dev_maps =
-	    container_of(rcu, struct xps_dev_maps, rcu);
-
-	kfree(dev_maps);
-}
-
 static DEFINE_MUTEX(xps_map_mutex);
 #define xmap_dereference(P)		\
 	rcu_dereference_protected((P), lockdep_is_held(&xps_map_mutex))
@@ -968,7 +942,7 @@ static ssize_t store_xps_map(struct netdev_queue *queue,
 		} else
 			pos = map_len = alloc_len = 0;
 
-		need_set = cpu_isset(cpu, *mask) && cpu_online(cpu);
+		need_set = cpumask_test_cpu(cpu, mask) && cpu_online(cpu);
 #ifdef CONFIG_NUMA
 		if (need_set) {
 			if (numa_node == -2)
@@ -1009,7 +983,7 @@ static ssize_t store_xps_map(struct netdev_queue *queue,
 		map = dev_maps ?
 			xmap_dereference(dev_maps->cpu_map[cpu]) : NULL;
 		if (map && xmap_dereference(new_dev_maps->cpu_map[cpu]) != map)
-			call_rcu(&map->rcu, xps_map_release);
+			kfree_rcu(map, rcu);
 		if (new_dev_maps->cpu_map[cpu])
 			nonempty = 1;
 	}
@@ -1022,7 +996,7 @@ static ssize_t store_xps_map(struct netdev_queue *queue,
 	}
 
 	if (dev_maps)
-		call_rcu(&dev_maps->rcu, xps_dev_maps_release);
+		kfree_rcu(dev_maps, rcu);
 
 	netdev_queue_numa_node_write(queue, (numa_node >= 0) ? numa_node :
 					    NUMA_NO_NODE);
@@ -1084,7 +1058,7 @@ static void netdev_queue_release(struct kobject *kobj)
 				else {
 					RCU_INIT_POINTER(dev_maps->cpu_map[i],
 					    NULL);
-					call_rcu(&map->rcu, xps_map_release);
+					kfree_rcu(map, rcu);
 					map = NULL;
 				}
 			}
@@ -1094,7 +1068,7 @@ static void netdev_queue_release(struct kobject *kobj)
 
 		if (!nonempty) {
 			RCU_INIT_POINTER(dev->xps_maps, NULL);
-			call_rcu(&dev_maps->rcu, xps_dev_maps_release);
+			kfree_rcu(dev_maps, rcu);
 		}
 	}
 
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 3f860261c5e..2e2dce6583e 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -27,14 +27,6 @@ EXPORT_SYMBOL(init_net);
 
 #define INITIAL_NET_GEN_PTRS	13 /* +1 for len +2 for rcu_head */
 
-static void net_generic_release(struct rcu_head *rcu)
-{
-	struct net_generic *ng;
-
-	ng = container_of(rcu, struct net_generic, rcu);
-	kfree(ng);
-}
-
 static int net_assign_generic(struct net *net, int id, void *data)
 {
 	struct net_generic *ng, *old_ng;
@@ -68,7 +60,7 @@ static int net_assign_generic(struct net *net, int id, void *data)
 	memcpy(&ng->ptr, &old_ng->ptr, old_ng->len * sizeof(void*));
 
 	rcu_assign_pointer(net->gen, ng);
-	call_rcu(&old_ng->rcu, net_generic_release);
+	kfree_rcu(old_ng, rcu);
 assign:
 	ng->ptr[id - 1] = data;
 	return 0;
@@ -216,11 +208,14 @@ static void net_free(struct net *net)
 	kmem_cache_free(net_cachep, net);
 }
 
-static struct net *net_create(void)
+struct net *copy_net_ns(unsigned long flags, struct net *old_net)
 {
 	struct net *net;
 	int rv;
 
+	if (!(flags & CLONE_NEWNET))
+		return get_net(old_net);
+
 	net = net_alloc();
 	if (!net)
 		return ERR_PTR(-ENOMEM);
@@ -239,13 +234,6 @@ static struct net *net_create(void)
 	return net;
 }
 
-struct net *copy_net_ns(unsigned long flags, struct net *old_net)
-{
-	if (!(flags & CLONE_NEWNET))
-		return get_net(old_net);
-	return net_create();
-}
-
 static DEFINE_SPINLOCK(cleanup_list_lock);
 static LIST_HEAD(cleanup_list);  /* Must hold cleanup_list_lock to touch */
 
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 06be2431753..2d7d6d47378 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -539,7 +539,7 @@ int __netpoll_rx(struct sk_buff *skb)
 {
 	int proto, len, ulen;
 	int hits = 0;
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	struct udphdr *uh;
 	struct netpoll_info *npinfo = skb->dev->npinfo;
 	struct netpoll *np, *tmp;
@@ -698,32 +698,8 @@ int netpoll_parse_options(struct netpoll *np, char *opt)
 
 	if (*cur != 0) {
 		/* MAC address */
-		if ((delim = strchr(cur, ':')) == NULL)
-			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[0] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		if ((delim = strchr(cur, ':')) == NULL)
-			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[1] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		if ((delim = strchr(cur, ':')) == NULL)
+		if (!mac_pton(cur, np->remote_mac))
 			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[2] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		if ((delim = strchr(cur, ':')) == NULL)
-			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[3] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		if ((delim = strchr(cur, ':')) == NULL)
-			goto parse_failed;
-		*delim = 0;
-		np->remote_mac[4] = simple_strtol(cur, NULL, 16);
-		cur = delim + 1;
-		np->remote_mac[5] = simple_strtol(cur, NULL, 16);
 	}
 
 	netpoll_print_options(np);
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index aeeece72b72..67870e9fd09 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -156,6 +156,7 @@
 #include <linux/wait.h>
 #include <linux/etherdevice.h>
 #include <linux/kthread.h>
+#include <linux/prefetch.h>
 #include <net/net_namespace.h>
 #include <net/checksum.h>
 #include <net/ipv6.h>
@@ -449,7 +450,6 @@ static void pktgen_stop(struct pktgen_thread *t);
 static void pktgen_clear_counters(struct pktgen_dev *pkt_dev);
 
 static unsigned int scan_ip6(const char *s, char ip[16]);
-static unsigned int fmt_ip6(char *s, const char ip[16]);
 
 /* Module parameters, defaults. */
 static int pg_count_d __read_mostly = 1000;
@@ -556,21 +556,13 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
 			   pkt_dev->skb_priority);
 
 	if (pkt_dev->flags & F_IPV6) {
-		char b1[128], b2[128], b3[128];
-		fmt_ip6(b1, pkt_dev->in6_saddr.s6_addr);
-		fmt_ip6(b2, pkt_dev->min_in6_saddr.s6_addr);
-		fmt_ip6(b3, pkt_dev->max_in6_saddr.s6_addr);
 		seq_printf(seq,
-			   "     saddr: %s  min_saddr: %s  max_saddr: %s\n", b1,
-			   b2, b3);
-
-		fmt_ip6(b1, pkt_dev->in6_daddr.s6_addr);
-		fmt_ip6(b2, pkt_dev->min_in6_daddr.s6_addr);
-		fmt_ip6(b3, pkt_dev->max_in6_daddr.s6_addr);
-		seq_printf(seq,
-			   "     daddr: %s  min_daddr: %s  max_daddr: %s\n", b1,
-			   b2, b3);
-
+			   "     saddr: %pI6c  min_saddr: %pI6c  max_saddr: %pI6c\n"
+			   "     daddr: %pI6c  min_daddr: %pI6c  max_daddr: %pI6c\n",
+			   &pkt_dev->in6_saddr,
+			   &pkt_dev->min_in6_saddr, &pkt_dev->max_in6_saddr,
+			   &pkt_dev->in6_daddr,
+			   &pkt_dev->min_in6_daddr, &pkt_dev->max_in6_daddr);
 	} else {
 		seq_printf(seq,
 			   "     dst_min: %s  dst_max: %s\n",
@@ -706,10 +698,9 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
 		   pkt_dev->cur_src_mac_offset);
 
 	if (pkt_dev->flags & F_IPV6) {
-		char b1[128], b2[128];
-		fmt_ip6(b1, pkt_dev->cur_in6_daddr.s6_addr);
-		fmt_ip6(b2, pkt_dev->cur_in6_saddr.s6_addr);
-		seq_printf(seq, "     cur_saddr: %s  cur_daddr: %s\n", b2, b1);
+		seq_printf(seq, "     cur_saddr: %pI6c  cur_daddr: %pI6c\n",
+				&pkt_dev->cur_in6_saddr,
+				&pkt_dev->cur_in6_daddr);
 	} else
 		seq_printf(seq, "     cur_saddr: 0x%x  cur_daddr: 0x%x\n",
 			   pkt_dev->cur_saddr, pkt_dev->cur_daddr);
@@ -1309,7 +1300,7 @@ static ssize_t pktgen_if_write(struct file *file,
 		buf[len] = 0;
 
 		scan_ip6(buf, pkt_dev->in6_daddr.s6_addr);
-		fmt_ip6(buf, pkt_dev->in6_daddr.s6_addr);
+		snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->in6_daddr);
 
 		ipv6_addr_copy(&pkt_dev->cur_in6_daddr, &pkt_dev->in6_daddr);
 
@@ -1332,7 +1323,7 @@ static ssize_t pktgen_if_write(struct file *file,
 		buf[len] = 0;
 
 		scan_ip6(buf, pkt_dev->min_in6_daddr.s6_addr);
-		fmt_ip6(buf, pkt_dev->min_in6_daddr.s6_addr);
+		snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->min_in6_daddr);
 
 		ipv6_addr_copy(&pkt_dev->cur_in6_daddr,
 			       &pkt_dev->min_in6_daddr);
@@ -1355,7 +1346,7 @@ static ssize_t pktgen_if_write(struct file *file,
 		buf[len] = 0;
 
 		scan_ip6(buf, pkt_dev->max_in6_daddr.s6_addr);
-		fmt_ip6(buf, pkt_dev->max_in6_daddr.s6_addr);
+		snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->max_in6_daddr);
 
 		if (debug)
 			printk(KERN_DEBUG "pktgen: dst6_max set to: %s\n", buf);
@@ -1376,7 +1367,7 @@ static ssize_t pktgen_if_write(struct file *file,
 		buf[len] = 0;
 
 		scan_ip6(buf, pkt_dev->in6_saddr.s6_addr);
-		fmt_ip6(buf, pkt_dev->in6_saddr.s6_addr);
+		snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->in6_saddr);
 
 		ipv6_addr_copy(&pkt_dev->cur_in6_saddr, &pkt_dev->in6_saddr);
 
@@ -1430,11 +1421,6 @@ static ssize_t pktgen_if_write(struct file *file,
 		return count;
 	}
 	if (!strcmp(name, "dst_mac")) {
-		char *v = valstr;
-		unsigned char old_dmac[ETH_ALEN];
-		unsigned char *m = pkt_dev->dst_mac;
-		memcpy(old_dmac, pkt_dev->dst_mac, ETH_ALEN);
-
 		len = strn_len(&user_buffer[i], sizeof(valstr) - 1);
 		if (len < 0)
 			return len;
@@ -1442,35 +1428,16 @@ static ssize_t pktgen_if_write(struct file *file,
 		memset(valstr, 0, sizeof(valstr));
 		if (copy_from_user(valstr, &user_buffer[i], len))
 			return -EFAULT;
-		i += len;
-
-		for (*m = 0; *v && m < pkt_dev->dst_mac + 6; v++) {
-			int value;
-
-			value = hex_to_bin(*v);
-			if (value >= 0)
-				*m = *m * 16 + value;
-
-			if (*v == ':') {
-				m++;
-				*m = 0;
-			}
-		}
 
+		if (!mac_pton(valstr, pkt_dev->dst_mac))
+			return -EINVAL;
 		/* Set up Dest MAC */
-		if (compare_ether_addr(old_dmac, pkt_dev->dst_mac))
-			memcpy(&(pkt_dev->hh[0]), pkt_dev->dst_mac, ETH_ALEN);
+		memcpy(&pkt_dev->hh[0], pkt_dev->dst_mac, ETH_ALEN);
 
-		sprintf(pg_result, "OK: dstmac");
+		sprintf(pg_result, "OK: dstmac %pM", pkt_dev->dst_mac);
 		return count;
 	}
 	if (!strcmp(name, "src_mac")) {
-		char *v = valstr;
-		unsigned char old_smac[ETH_ALEN];
-		unsigned char *m = pkt_dev->src_mac;
-
-		memcpy(old_smac, pkt_dev->src_mac, ETH_ALEN);
-
 		len = strn_len(&user_buffer[i], sizeof(valstr) - 1);
 		if (len < 0)
 			return len;
@@ -1478,26 +1445,13 @@ static ssize_t pktgen_if_write(struct file *file,
 		memset(valstr, 0, sizeof(valstr));
 		if (copy_from_user(valstr, &user_buffer[i], len))
 			return -EFAULT;
-		i += len;
-
-		for (*m = 0; *v && m < pkt_dev->src_mac + 6; v++) {
-			int value;
-
-			value = hex_to_bin(*v);
-			if (value >= 0)
-				*m = *m * 16 + value;
-
-			if (*v == ':') {
-				m++;
-				*m = 0;
-			}
-		}
 
+		if (!mac_pton(valstr, pkt_dev->src_mac))
+			return -EINVAL;
 		/* Set up Src MAC */
-		if (compare_ether_addr(old_smac, pkt_dev->src_mac))
-			memcpy(&(pkt_dev->hh[6]), pkt_dev->src_mac, ETH_ALEN);
+		memcpy(&pkt_dev->hh[6], pkt_dev->src_mac, ETH_ALEN);
 
-		sprintf(pg_result, "OK: srcmac");
+		sprintf(pg_result, "OK: srcmac %pM", pkt_dev->src_mac);
 		return count;
 	}
 
@@ -2514,7 +2468,6 @@ static int pktgen_output_ipsec(struct sk_buff *skb, struct pktgen_dev *pkt_dev)
 {
 	struct xfrm_state *x = pkt_dev->flows[pkt_dev->curfl].x;
 	int err = 0;
-	struct iphdr *iph;
 
 	if (!x)
 		return 0;
@@ -2524,7 +2477,6 @@ static int pktgen_output_ipsec(struct sk_buff *skb, struct pktgen_dev *pkt_dev)
 		return 0;
 
 	spin_lock(&x->lock);
-	iph = ip_hdr(skb);
 
 	err = x->outer_mode->output(x, skb);
 	if (err)
@@ -2624,6 +2576,7 @@ static void pktgen_finalize_skb(struct pktgen_dev *pkt_dev, struct sk_buff *skb,
 	} else {
 		int frags = pkt_dev->nfrags;
 		int i, len;
+		int frag_len;
 
 
 		if (frags > MAX_SKB_FRAGS)
@@ -2635,6 +2588,8 @@ static void pktgen_finalize_skb(struct pktgen_dev *pkt_dev, struct sk_buff *skb,
 		}
 
 		i = 0;
+		frag_len = (datalen/frags) < PAGE_SIZE ?
+			   (datalen/frags) : PAGE_SIZE;
 		while (datalen > 0) {
 			if (unlikely(!pkt_dev->page)) {
 				int node = numa_node_id();
@@ -2648,38 +2603,18 @@ static void pktgen_finalize_skb(struct pktgen_dev *pkt_dev, struct sk_buff *skb,
 			skb_shinfo(skb)->frags[i].page = pkt_dev->page;
 			get_page(pkt_dev->page);
 			skb_shinfo(skb)->frags[i].page_offset = 0;
-			skb_shinfo(skb)->frags[i].size =
-			    (datalen < PAGE_SIZE ? datalen : PAGE_SIZE);
+			/*last fragment, fill rest of data*/
+			if (i == (frags - 1))
+				skb_shinfo(skb)->frags[i].size =
+				    (datalen < PAGE_SIZE ? datalen : PAGE_SIZE);
+			else
+				skb_shinfo(skb)->frags[i].size = frag_len;
 			datalen -= skb_shinfo(skb)->frags[i].size;
 			skb->len += skb_shinfo(skb)->frags[i].size;
 			skb->data_len += skb_shinfo(skb)->frags[i].size;
 			i++;
 			skb_shinfo(skb)->nr_frags = i;
 		}
-
-		while (i < frags) {
-			int rem;
-
-			if (i == 0)
-				break;
-
-			rem = skb_shinfo(skb)->frags[i - 1].size / 2;
-			if (rem == 0)
-				break;
-
-			skb_shinfo(skb)->frags[i - 1].size -= rem;
-
-			skb_shinfo(skb)->frags[i] =
-			    skb_shinfo(skb)->frags[i - 1];
-			get_page(skb_shinfo(skb)->frags[i].page);
-			skb_shinfo(skb)->frags[i].page =
-			    skb_shinfo(skb)->frags[i - 1].page;
-			skb_shinfo(skb)->frags[i].page_offset +=
-			    skb_shinfo(skb)->frags[i - 1].size;
-			skb_shinfo(skb)->frags[i].size = rem;
-			i++;
-			skb_shinfo(skb)->nr_frags = i;
-		}
 	}
 
 	/* Stamp the time, and sequence number,
@@ -2917,79 +2852,6 @@ static unsigned int scan_ip6(const char *s, char ip[16])
 	return len;
 }
 
-static char tohex(char hexdigit)
-{
-	return hexdigit > 9 ? hexdigit + 'a' - 10 : hexdigit + '0';
-}
-
-static int fmt_xlong(char *s, unsigned int i)
-{
-	char *bak = s;
-	*s = tohex((i >> 12) & 0xf);
-	if (s != bak || *s != '0')
-		++s;
-	*s = tohex((i >> 8) & 0xf);
-	if (s != bak || *s != '0')
-		++s;
-	*s = tohex((i >> 4) & 0xf);
-	if (s != bak || *s != '0')
-		++s;
-	*s = tohex(i & 0xf);
-	return s - bak + 1;
-}
-
-static unsigned int fmt_ip6(char *s, const char ip[16])
-{
-	unsigned int len;
-	unsigned int i;
-	unsigned int temp;
-	unsigned int compressing;
-	int j;
-
-	len = 0;
-	compressing = 0;
-	for (j = 0; j < 16; j += 2) {
-
-#ifdef V4MAPPEDPREFIX
-		if (j == 12 && !memcmp(ip, V4mappedprefix, 12)) {
-			inet_ntoa_r(*(struct in_addr *)(ip + 12), s);
-			temp = strlen(s);
-			return len + temp;
-		}
-#endif
-		temp = ((unsigned long)(unsigned char)ip[j] << 8) +
-		    (unsigned long)(unsigned char)ip[j + 1];
-		if (temp == 0) {
-			if (!compressing) {
-				compressing = 1;
-				if (j == 0) {
-					*s++ = ':';
-					++len;
-				}
-			}
-		} else {
-			if (compressing) {
-				compressing = 0;
-				*s++ = ':';
-				++len;
-			}
-			i = fmt_xlong(s, temp);
-			len += i;
-			s += i;
-			if (j < 14) {
-				*s++ = ':';
-				++len;
-			}
-		}
-	}
-	if (compressing) {
-		*s++ = ':';
-		++len;
-	}
-	*s = 0;
-	return len;
-}
-
 static struct sk_buff *fill_packet_ipv6(struct net_device *odev,
 					struct pktgen_dev *pkt_dev)
 {
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 49f7ea5b4c7..d2ba2597c75 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -196,7 +196,7 @@ EXPORT_SYMBOL_GPL(__rtnl_register);
  * as failure of this function is very unlikely, it can only happen due
  * to lack of memory when allocating the chain to store all message
  * handlers for a protocol. Meant for use in init functions where lack
- * of memory implies no sense in continueing.
+ * of memory implies no sense in continuing.
  */
 void rtnl_register(int protocol, int msgtype,
 		   rtnl_doit_func doit, rtnl_dumpit_func dumpit)
@@ -1007,10 +1007,11 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 	s_h = cb->args[0];
 	s_idx = cb->args[1];
 
+	rcu_read_lock();
 	for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
 		idx = 0;
 		head = &net->dev_index_head[h];
-		hlist_for_each_entry(dev, node, head, index_hlist) {
+		hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
 			if (idx < s_idx)
 				goto cont;
 			if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
@@ -1023,6 +1024,7 @@ cont:
 		}
 	}
 out:
+	rcu_read_unlock();
 	cb->args[1] = idx;
 	cb->args[0] = h;
 
@@ -1440,7 +1442,7 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm,
 errout:
 	if (err < 0 && modified && net_ratelimit())
 		printk(KERN_WARNING "A link change request failed with "
-		       "some changes comitted already. Interface %s may "
+		       "some changes committed already. Interface %s may "
 		       "have been left with an inconsistent configuration, "
 		       "please check.\n", dev->name);
 
@@ -1499,6 +1501,7 @@ static int rtnl_dellink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 	char ifname[IFNAMSIZ];
 	struct nlattr *tb[IFLA_MAX+1];
 	int err;
+	LIST_HEAD(list_kill);
 
 	err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
 	if (err < 0)
@@ -1522,7 +1525,9 @@ static int rtnl_dellink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 	if (!ops)
 		return -EOPNOTSUPP;
 
-	ops->dellink(dev, NULL);
+	ops->dellink(dev, &list_kill);
+	unregister_netdevice_many(&list_kill);
+	list_del(&list_kill);
 	return 0;
 }
 
@@ -1570,12 +1575,6 @@ struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
 	dev->rtnl_link_state = RTNL_LINK_INITIALIZING;
 	dev->real_num_tx_queues = real_num_queues;
 
-	if (strchr(dev->name, '%')) {
-		err = dev_alloc_name(dev, dev->name);
-		if (err < 0)
-			goto err_free;
-	}
-
 	if (tb[IFLA_MTU])
 		dev->mtu = nla_get_u32(tb[IFLA_MTU]);
 	if (tb[IFLA_ADDRESS])
@@ -1595,8 +1594,6 @@ struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
 
 	return dev;
 
-err_free:
-	free_netdev(dev);
 err:
 	return ERR_PTR(err);
 }
@@ -1879,7 +1876,6 @@ static int rtnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	int min_len;
 	int family;
 	int type;
-	int err;
 
 	type = nlh->nlmsg_type;
 	if (type > RTM_MAX)
@@ -1906,11 +1902,8 @@ static int rtnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 		if (dumpit == NULL)
 			return -EOPNOTSUPP;
 
-		__rtnl_unlock();
 		rtnl = net->rtnl;
-		err = netlink_dump_start(rtnl, skb, nlh, dumpit, NULL);
-		rtnl_lock();
-		return err;
+		return netlink_dump_start(rtnl, skb, nlh, dumpit, NULL);
 	}
 
 	memset(rta_buf, 0, (rtattr_max * sizeof(struct rtattr *)));
@@ -1980,7 +1973,7 @@ static int __net_init rtnetlink_net_init(struct net *net)
 {
 	struct sock *sk;
 	sk = netlink_kernel_create(net, NETLINK_ROUTE, RTNLGRP_MAX,
-				   rtnetlink_rcv, &rtnl_mutex, THIS_MODULE);
+				   rtnetlink_rcv, NULL, THIS_MODULE);
 	if (!sk)
 		return -ENOMEM;
 	net->rtnl = sk;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 801dd08908f..46cbd28f40f 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -57,6 +57,7 @@
 #include <linux/init.h>
 #include <linux/scatterlist.h>
 #include <linux/errqueue.h>
+#include <linux/prefetch.h>
 
 #include <net/protocol.h>
 #include <net/dst.h>
@@ -2267,7 +2268,7 @@ EXPORT_SYMBOL(skb_prepare_seq_read);
  * of bytes already consumed and the next call to
  * skb_seq_read() will return the remaining part of the block.
  *
- * Note 1: The size of each block of data returned can be arbitary,
+ * Note 1: The size of each block of data returned can be arbitrary,
  *       this limitation is the cost for zerocopy seqeuental
  *       reads of potentially non linear data.
  *
@@ -2993,6 +2994,9 @@ int sock_queue_err_skb(struct sock *sk, struct sk_buff *skb)
 	skb->destructor = sock_rmem_free;
 	atomic_add(skb->truesize, &sk->sk_rmem_alloc);
 
+	/* before exiting rcu section, make sure dst is refcounted */
+	skb_dst_force(skb);
+
 	skb_queue_tail(&sk->sk_error_queue, skb);
 	if (!sock_flag(sk, SOCK_DEAD))
 		sk->sk_data_ready(sk, skb->len);
diff --git a/net/core/sock.c b/net/core/sock.c
index 7dfed792434..6e819780c23 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -215,7 +215,7 @@ __u32 sysctl_rmem_max __read_mostly = SK_RMEM_MAX;
 __u32 sysctl_wmem_default __read_mostly = SK_WMEM_MAX;
 __u32 sysctl_rmem_default __read_mostly = SK_RMEM_MAX;
 
-/* Maximal space eaten by iovec or ancilliary data plus some space */
+/* Maximal space eaten by iovec or ancillary data plus some space */
 int sysctl_optmem_max __read_mostly = sizeof(unsigned long)*(2*UIO_MAXIOV+512);
 EXPORT_SYMBOL(sysctl_optmem_max);
 
@@ -1175,7 +1175,7 @@ static void __sk_free(struct sock *sk)
 void sk_free(struct sock *sk)
 {
 	/*
-	 * We substract one from sk_wmem_alloc and can know if
+	 * We subtract one from sk_wmem_alloc and can know if
 	 * some packets are still in some tx queue.
 	 * If not null, sock_wfree() will call __sk_free(sk) later
 	 */
@@ -1185,10 +1185,10 @@ void sk_free(struct sock *sk)
 EXPORT_SYMBOL(sk_free);
 
 /*
- * Last sock_put should drop referrence to sk->sk_net. It has already
- * been dropped in sk_change_net. Taking referrence to stopping namespace
+ * Last sock_put should drop reference to sk->sk_net. It has already
+ * been dropped in sk_change_net. Taking reference to stopping namespace
  * is not an option.
- * Take referrence to a socket to remove it from hash _alive_ and after that
+ * Take reference to a socket to remove it from hash _alive_ and after that
  * destroy it in the context of init_net.
  */
 void sk_release_kernel(struct sock *sk)
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 385b6095fdc..a829e3f60ae 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -122,6 +122,15 @@ static struct ctl_table net_core_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
+#ifdef CONFIG_BPF_JIT
+	{
+		.procname	= "bpf_jit_enable",
+		.data		= &bpf_jit_enable,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec
+	},
+#endif
 	{
 		.procname	= "netdev_tstamp_prequeue",
 		.data		= &netdev_tstamp_prequeue,
diff --git a/net/core/utils.c b/net/core/utils.c
index 5fea0ab2190..2012bc797f9 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -296,3 +296,27 @@ void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
 				csum_unfold(*sum)));
 }
 EXPORT_SYMBOL(inet_proto_csum_replace4);
+
+int mac_pton(const char *s, u8 *mac)
+{
+	int i;
+
+	/* XX:XX:XX:XX:XX:XX */
+	if (strlen(s) < 3 * ETH_ALEN - 1)
+		return 0;
+
+	/* Don't dirty result unless string is valid MAC. */
+	for (i = 0; i < ETH_ALEN; i++) {
+		if (!strchr("0123456789abcdefABCDEF", s[i * 3]))
+			return 0;
+		if (!strchr("0123456789abcdefABCDEF", s[i * 3 + 1]))
+			return 0;
+		if (i != ETH_ALEN - 1 && s[i * 3 + 2] != ':')
+			return 0;
+	}
+	for (i = 0; i < ETH_ALEN; i++) {
+		mac[i] = (hex_to_bin(s[i * 3]) << 4) | hex_to_bin(s[i * 3 + 1]);
+	}
+	return 1;
+}
+EXPORT_SYMBOL(mac_pton);
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index ae451c6d83b..8c36adfd191 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -40,13 +40,15 @@
 
 int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {
+	const struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
 	struct inet_sock *inet = inet_sk(sk);
 	struct dccp_sock *dp = dccp_sk(sk);
-	const struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
 	__be16 orig_sport, orig_dport;
-	struct rtable *rt;
 	__be32 daddr, nexthop;
+	struct flowi4 *fl4;
+	struct rtable *rt;
 	int err;
+	struct ip_options_rcu *inet_opt;
 
 	dp->dccps_role = DCCP_ROLE_CLIENT;
 
@@ -57,15 +59,19 @@ int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 		return -EAFNOSUPPORT;
 
 	nexthop = daddr = usin->sin_addr.s_addr;
-	if (inet->opt != NULL && inet->opt->srr) {
+
+	inet_opt = rcu_dereference_protected(inet->inet_opt,
+					     sock_owned_by_user(sk));
+	if (inet_opt != NULL && inet_opt->opt.srr) {
 		if (daddr == 0)
 			return -EINVAL;
-		nexthop = inet->opt->faddr;
+		nexthop = inet_opt->opt.faddr;
 	}
 
 	orig_sport = inet->inet_sport;
 	orig_dport = usin->sin_port;
-	rt = ip_route_connect(nexthop, inet->inet_saddr,
+	fl4 = &inet->cork.fl.u.ip4;
+	rt = ip_route_connect(fl4, nexthop, inet->inet_saddr,
 			      RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
 			      IPPROTO_DCCP,
 			      orig_sport, orig_dport, sk, true);
@@ -77,19 +83,19 @@ int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 		return -ENETUNREACH;
 	}
 
-	if (inet->opt == NULL || !inet->opt->srr)
-		daddr = rt->rt_dst;
+	if (inet_opt == NULL || !inet_opt->opt.srr)
+		daddr = fl4->daddr;
 
 	if (inet->inet_saddr == 0)
-		inet->inet_saddr = rt->rt_src;
+		inet->inet_saddr = fl4->saddr;
 	inet->inet_rcv_saddr = inet->inet_saddr;
 
 	inet->inet_dport = usin->sin_port;
 	inet->inet_daddr = daddr;
 
 	inet_csk(sk)->icsk_ext_hdr_len = 0;
-	if (inet->opt != NULL)
-		inet_csk(sk)->icsk_ext_hdr_len = inet->opt->optlen;
+	if (inet_opt)
+		inet_csk(sk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
 	/*
 	 * Socket identity is still unknown (sport may be zero).
 	 * However we set state to DCCP_REQUESTING and not releasing socket
@@ -101,8 +107,7 @@ int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 	if (err != 0)
 		goto failure;
 
-	rt = ip_route_newports(rt, IPPROTO_DCCP,
-			       orig_sport, orig_dport,
+	rt = ip_route_newports(fl4, rt, orig_sport, orig_dport,
 			       inet->inet_sport, inet->inet_dport, sk);
 	if (IS_ERR(rt)) {
 		rt = NULL;
@@ -391,32 +396,30 @@ struct sock *dccp_v4_request_recv_sock(struct sock *sk, struct sk_buff *skb,
 	if (sk_acceptq_is_full(sk))
 		goto exit_overflow;
 
-	if (dst == NULL && (dst = inet_csk_route_req(sk, req)) == NULL)
-		goto exit;
-
 	newsk = dccp_create_openreq_child(sk, req, skb);
 	if (newsk == NULL)
 		goto exit_nonewsk;
 
-	sk_setup_caps(newsk, dst);
-
 	newinet		   = inet_sk(newsk);
 	ireq		   = inet_rsk(req);
 	newinet->inet_daddr	= ireq->rmt_addr;
 	newinet->inet_rcv_saddr = ireq->loc_addr;
 	newinet->inet_saddr	= ireq->loc_addr;
-	newinet->opt	   = ireq->opt;
+	newinet->inet_opt	= ireq->opt;
 	ireq->opt	   = NULL;
 	newinet->mc_index  = inet_iif(skb);
 	newinet->mc_ttl	   = ip_hdr(skb)->ttl;
 	newinet->inet_id   = jiffies;
 
+	if (dst == NULL && (dst = inet_csk_route_child_sock(sk, newsk, req)) == NULL)
+		goto put_and_exit;
+
+	sk_setup_caps(newsk, dst);
+
 	dccp_sync_mss(newsk, dst_mtu(dst));
 
-	if (__inet_inherit_port(sk, newsk) < 0) {
-		sock_put(newsk);
-		goto exit;
-	}
+	if (__inet_inherit_port(sk, newsk) < 0)
+		goto put_and_exit;
 	__inet_hash_nolisten(newsk, NULL);
 
 	return newsk;
@@ -428,6 +431,9 @@ exit_nonewsk:
 exit:
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
 	return NULL;
+put_and_exit:
+	sock_put(newsk);
+	goto exit;
 }
 
 EXPORT_SYMBOL_GPL(dccp_v4_request_recv_sock);
@@ -491,8 +497,9 @@ static int dccp_v4_send_response(struct sock *sk, struct request_sock *req,
 	int err = -1;
 	struct sk_buff *skb;
 	struct dst_entry *dst;
+	struct flowi4 fl4;
 
-	dst = inet_csk_route_req(sk, req);
+	dst = inet_csk_route_req(sk, &fl4, req);
 	if (dst == NULL)
 		goto out;
 
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index de1b7e37ad5..8dc4348774a 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -54,8 +54,8 @@ static void dccp_v6_hash(struct sock *sk)
 
 /* add pseudo-header to DCCP checksum stored in skb->csum */
 static inline __sum16 dccp_v6_csum_finish(struct sk_buff *skb,
-				      struct in6_addr *saddr,
-				      struct in6_addr *daddr)
+				      const struct in6_addr *saddr,
+				      const struct in6_addr *daddr)
 {
 	return csum_ipv6_magic(saddr, daddr, skb->len, IPPROTO_DCCP, skb->csum);
 }
@@ -87,7 +87,7 @@ static inline __u32 dccp_v6_init_sequence(struct sk_buff *skb)
 static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 			u8 type, u8 code, int offset, __be32 info)
 {
-	struct ipv6hdr *hdr = (struct ipv6hdr *)skb->data;
+	const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data;
 	const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
 	struct dccp_sock *dp;
 	struct ipv6_pinfo *np;
@@ -296,7 +296,7 @@ static void dccp_v6_reqsk_destructor(struct request_sock *req)
 
 static void dccp_v6_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 {
-	struct ipv6hdr *rxip6h;
+	const struct ipv6hdr *rxip6h;
 	struct sk_buff *skb;
 	struct flowi6 fl6;
 	struct net *net = dev_net(skb_dst(rxskb)->dev);
@@ -573,7 +573,7 @@ static struct sock *dccp_v6_request_recv_sock(struct sock *sk,
 
 	   First: no IPv4 options.
 	 */
-	newinet->opt = NULL;
+	newinet->inet_opt = NULL;
 
 	/* Clone RX bits */
 	newnp->rxopt.all = np->rxopt.all;
diff --git a/net/dccp/options.c b/net/dccp/options.c
index f06ffcfc8d7..4b2ab657ac8 100644
--- a/net/dccp/options.c
+++ b/net/dccp/options.c
@@ -123,6 +123,8 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
 		case DCCPO_CHANGE_L ... DCCPO_CONFIRM_R:
 			if (pkt_type == DCCP_PKT_DATA)      /* RFC 4340, 6 */
 				break;
+			if (len == 0)
+				goto out_invalid_option;
 			rc = dccp_feat_parse_options(sk, dreq, mandatory, opt,
 						    *value, value + 1, len - 1);
 			if (rc)
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 784d3021054..fab108e51e5 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -43,7 +43,7 @@ static void dccp_skb_entail(struct sock *sk, struct sk_buff *skb)
 static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
 {
 	if (likely(skb != NULL)) {
-		const struct inet_sock *inet = inet_sk(sk);
+		struct inet_sock *inet = inet_sk(sk);
 		const struct inet_connection_sock *icsk = inet_csk(sk);
 		struct dccp_sock *dp = dccp_sk(sk);
 		struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
@@ -136,14 +136,14 @@ static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb)
 
 		DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
 
-		err = icsk->icsk_af_ops->queue_xmit(skb);
+		err = icsk->icsk_af_ops->queue_xmit(skb, &inet->cork.fl);
 		return net_xmit_eval(err);
 	}
 	return -ENOBUFS;
 }
 
 /**
- * dccp_determine_ccmps  -  Find out about CCID-specfic packet-size limits
+ * dccp_determine_ccmps  -  Find out about CCID-specific packet-size limits
  * We only consider the HC-sender CCID for setting the CCMPS (RFC 4340, 14.),
  * since the RX CCID is restricted to feedback packets (Acks), which are small
  * in comparison with the data traffic. A value of 0 means "no current CCMPS".
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 0dcaa903e00..cf26ac74a18 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -332,14 +332,9 @@ static struct dn_ifaddr *dn_dev_alloc_ifa(void)
 	return ifa;
 }
 
-static void dn_dev_free_ifa_rcu(struct rcu_head *head)
-{
-	kfree(container_of(head, struct dn_ifaddr, rcu));
-}
-
 static void dn_dev_free_ifa(struct dn_ifaddr *ifa)
 {
-	call_rcu(&ifa->rcu, dn_dev_free_ifa_rcu);
+	kfree_rcu(ifa, rcu);
 }
 
 static void dn_dev_del_ifa(struct dn_dev *dn_db, struct dn_ifaddr __rcu **ifap, int destroy)
@@ -752,7 +747,8 @@ static int dn_nl_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb)
 	skip_naddr = cb->args[1];
 
 	idx = 0;
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if (idx < skip_ndevs)
 			goto cont;
 		else if (idx > skip_ndevs) {
@@ -761,11 +757,11 @@ static int dn_nl_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb)
 			skip_naddr = 0;
 		}
 
-		if ((dn_db = rtnl_dereference(dev->dn_ptr)) == NULL)
+		if ((dn_db = rcu_dereference(dev->dn_ptr)) == NULL)
 			goto cont;
 
-		for (ifa = rtnl_dereference(dn_db->ifa_list), dn_idx = 0; ifa;
-		     ifa = rtnl_dereference(ifa->ifa_next), dn_idx++) {
+		for (ifa = rcu_dereference(dn_db->ifa_list), dn_idx = 0; ifa;
+		     ifa = rcu_dereference(ifa->ifa_next), dn_idx++) {
 			if (dn_idx < skip_naddr)
 				continue;
 
@@ -778,6 +774,7 @@ cont:
 		idx++;
 	}
 done:
+	rcu_read_unlock();
 	cb->args[0] = idx;
 	cb->args[1] = dn_idx;
 
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 9f09d4fc288..74544bc6fde 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -1125,13 +1125,11 @@ make_route:
 	if (dev_out->flags & IFF_LOOPBACK)
 		flags |= RTCF_LOCAL;
 
-	rt = dst_alloc(&dn_dst_ops, 0);
+	rt = dst_alloc(&dn_dst_ops, dev_out, 1, 0, DST_HOST);
 	if (rt == NULL)
 		goto e_nobufs;
 
-	atomic_set(&rt->dst.__refcnt, 1);
-	rt->dst.flags   = DST_HOST;
-
+	memset(&rt->fld, 0, sizeof(rt->fld));
 	rt->fld.saddr        = oldflp->saddr;
 	rt->fld.daddr        = oldflp->daddr;
 	rt->fld.flowidn_oif  = oldflp->flowidn_oif;
@@ -1146,8 +1144,6 @@ make_route:
 	rt->rt_dst_map    = fld.daddr;
 	rt->rt_src_map    = fld.saddr;
 
-	rt->dst.dev = dev_out;
-	dev_hold(dev_out);
 	rt->dst.neighbour = neigh;
 	neigh = NULL;
 
@@ -1399,10 +1395,11 @@ static int dn_route_input_slow(struct sk_buff *skb)
 	}
 
 make_route:
-	rt = dst_alloc(&dn_dst_ops, 0);
+	rt = dst_alloc(&dn_dst_ops, out_dev, 0, 0, DST_HOST);
 	if (rt == NULL)
 		goto e_nobufs;
 
+	memset(&rt->fld, 0, sizeof(rt->fld));
 	rt->rt_saddr      = fld.saddr;
 	rt->rt_daddr      = fld.daddr;
 	rt->rt_gateway    = fld.daddr;
@@ -1419,9 +1416,7 @@ make_route:
 	rt->fld.flowidn_iif  = in_dev->ifindex;
 	rt->fld.flowidn_mark = fld.flowidn_mark;
 
-	rt->dst.flags = DST_HOST;
 	rt->dst.neighbour = neigh;
-	rt->dst.dev = out_dev;
 	rt->dst.lastuse = jiffies;
 	rt->dst.output = dn_rt_bug;
 	switch(res.type) {
@@ -1440,8 +1435,6 @@ make_route:
 			rt->dst.input = dst_discard;
 	}
 	rt->rt_flags = flags;
-	if (rt->dst.dev)
-		dev_hold(rt->dst.dev);
 
 	err = dn_rt_set_next_hop(rt, &res);
 	if (err)
diff --git a/net/decnet/dn_table.c b/net/decnet/dn_table.c
index 99d8d3a4099..bd0a52dd1d4 100644
--- a/net/decnet/dn_table.c
+++ b/net/decnet/dn_table.c
@@ -123,11 +123,11 @@ static inline void dn_rebuild_zone(struct dn_zone *dz,
 				   struct dn_fib_node **old_ht,
 				   int old_divisor)
 {
-	int i;
 	struct dn_fib_node *f, **fp, *next;
+	int i;
 
 	for(i = 0; i < old_divisor; i++) {
-		for(f = old_ht[i]; f; f = f->fn_next) {
+		for(f = old_ht[i]; f; f = next) {
 			next = f->fn_next;
 			for(fp = dn_chain_p(f->fn_key, dz);
 				*fp && dn_key_leq((*fp)->fn_key, f->fn_key);
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 87bb5f4de0e..c53ded2a98d 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -41,12 +41,12 @@ config NET_DSA_MV88E6XXX_NEED_PPU
 	default n
 
 config NET_DSA_MV88E6131
-	bool "Marvell 88E6095/6095F/6131 ethernet switch chip support"
+	bool "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
 	select NET_DSA_MV88E6XXX
 	select NET_DSA_MV88E6XXX_NEED_PPU
 	select NET_DSA_TAG_DSA
 	---help---
-	  This enables support for the Marvell 88E6095/6095F/6131
+	  This enables support for the Marvell 88E6085/6095/6095F/6131
 	  ethernet switch chips.
 
 config NET_DSA_MV88E6123_61_65
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
index bb2b41bc854..45f7411e90b 100644
--- a/net/dsa/mv88e6131.c
+++ b/net/dsa/mv88e6131.c
@@ -14,6 +14,13 @@
 #include "dsa_priv.h"
 #include "mv88e6xxx.h"
 
+/*
+ * Switch product IDs
+ */
+#define ID_6085		0x04a0
+#define ID_6095		0x0950
+#define ID_6131		0x1060
+
 static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr)
 {
 	int ret;
@@ -21,9 +28,11 @@ static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr)
 	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
 	if (ret >= 0) {
 		ret &= 0xfff0;
-		if (ret == 0x0950)
+		if (ret == ID_6085)
+			return "Marvell 88E6085";
+		if (ret == ID_6095)
 			return "Marvell 88E6095/88E6095F";
-		if (ret == 0x1060)
+		if (ret == ID_6131)
 			return "Marvell 88E6131";
 	}
 
@@ -124,7 +133,7 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
 	 * Ignore removed tag data on doubly tagged packets, disable
 	 * flow control messages, force flow control priority to the
 	 * highest, and send all special multicast frames to the CPU
-	 * port at the higest priority.
+	 * port at the highest priority.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
 
@@ -164,6 +173,7 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
 
 static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 {
+	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
 	int addr = REG_PORT(p);
 	u16 val;
 
@@ -171,10 +181,13 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 	 * MAC Forcing register: don't force link, speed, duplex
 	 * or flow control state to any particular values on physical
 	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
-	 * full duplex.
+	 * (100 Mb/s on 6085) full duplex.
 	 */
 	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
-		REG_WRITE(addr, 0x01, 0x003e);
+		if (ps->id == ID_6085)
+			REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */
+		else
+			REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */
 	else
 		REG_WRITE(addr, 0x01, 0x0003);
 
@@ -194,8 +207,15 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 	 * mode, but do not enable forwarding of unknown unicasts.
 	 */
 	val = 0x0433;
-	if (p == dsa_upstream_port(ds))
+	if (p == dsa_upstream_port(ds)) {
 		val |= 0x0104;
+		/*
+		 * On 6085, unknown multicast forward is controlled
+		 * here rather than in Port Control 2 register.
+		 */
+		if (ps->id == ID_6085)
+			val |= 0x0008;
+	}
 	if (ds->dsa_port_mask & (1 << p))
 		val |= 0x0100;
 	REG_WRITE(addr, 0x04, val);
@@ -238,10 +258,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 	 * If this is the upstream port for this switch, enable
 	 * forwarding of unknown multicast addresses.
 	 */
-	val = 0x0080 | dsa_upstream_port(ds);
-	if (p == dsa_upstream_port(ds))
-		val |= 0x0040;
-	REG_WRITE(addr, 0x08, val);
+	if (ps->id == ID_6085)
+		/*
+		 * on 6085, bits 3:0 are reserved, bit 6 control ARP
+		 * mirroring, and multicast forward is handled in
+		 * Port Control register.
+		 */
+		REG_WRITE(addr, 0x08, 0x0080);
+	else {
+		val = 0x0080 | dsa_upstream_port(ds);
+		if (p == dsa_upstream_port(ds))
+			val |= 0x0040;
+		REG_WRITE(addr, 0x08, val);
+	}
 
 	/*
 	 * Rate Control: disable ingress rate limiting.
@@ -286,6 +315,8 @@ static int mv88e6131_setup(struct dsa_switch *ds)
 	mv88e6xxx_ppu_state_init(ds);
 	mutex_init(&ps->stats_mutex);
 
+	ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
+
 	ret = mv88e6131_switch_reset(ds);
 	if (ret < 0)
 		return ret;
diff --git a/net/dsa/mv88e6xxx.h b/net/dsa/mv88e6xxx.h
index eb0e0aaa9f1..61156ca26a0 100644
--- a/net/dsa/mv88e6xxx.h
+++ b/net/dsa/mv88e6xxx.h
@@ -39,6 +39,8 @@ struct mv88e6xxx_priv_state {
 	 * Hold this mutex over snapshot + dump sequences.
 	 */
 	struct mutex	stats_mutex;
+
+	int		id; /* switch product id */
 };
 
 struct mv88e6xxx_hw_stat {
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 64ca2a6fa0d..0a47b6c3703 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -288,7 +288,6 @@ static const struct ethtool_ops dsa_slave_ethtool_ops = {
 	.get_drvinfo		= dsa_slave_get_drvinfo,
 	.nway_reset		= dsa_slave_nway_reset,
 	.get_link		= dsa_slave_get_link,
-	.set_sg			= ethtool_op_set_sg,
 	.get_strings		= dsa_slave_get_strings,
 	.get_ethtool_stats	= dsa_slave_get_ethtool_stats,
 	.get_sset_count		= dsa_slave_get_sset_count,
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 116d3fd3d66..a1d9f3787dd 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -935,7 +935,6 @@ static void aun_data_available(struct sock *sk, int slen)
 	struct sk_buff *skb;
 	unsigned char *data;
 	struct aunhdr *ah;
-	struct iphdr *ip;
 	size_t len;
 
 	while ((skb = skb_recv_datagram(sk, 0, 1, &err)) == NULL) {
@@ -949,7 +948,6 @@ static void aun_data_available(struct sock *sk, int slen)
 	data = skb_transport_header(skb) + sizeof(struct udphdr);
 	ah = (struct aunhdr *)data;
 	len = skb->len - sizeof(struct udphdr);
-	ip = ip_hdr(skb);
 
 	switch (ah->code)
 	{
@@ -962,12 +960,6 @@ static void aun_data_available(struct sock *sk, int slen)
 	case 4:
 		aun_tx_ack(ah->handle, ECTYPE_TRANSMIT_NOT_LISTENING);
 		break;
-#if 0
-		/* This isn't quite right yet. */
-	case 5:
-		aun_send_response(ip->saddr, ah->handle, 6, ah->cb);
-		break;
-#endif
 	default:
 		printk(KERN_DEBUG "unknown AUN packet (type %d)\n", data[0]);
 	}
diff --git a/net/ieee802154/Makefile b/net/ieee802154/Makefile
index ce2d3358285..5761185f884 100644
--- a/net/ieee802154/Makefile
+++ b/net/ieee802154/Makefile
@@ -1,5 +1,3 @@
 obj-$(CONFIG_IEEE802154) +=	ieee802154.o af_802154.o
 ieee802154-y		:= netlink.o nl-mac.o nl-phy.o nl_policy.o wpan-class.o
 af_802154-y		:= af_ieee802154.o raw.o dgram.o
-
-ccflags-y += -Wall -DDEBUG
diff --git a/net/ipv4/Makefile b/net/ipv4/Makefile
index 0dc772d0d12..f2dc69cffb5 100644
--- a/net/ipv4/Makefile
+++ b/net/ipv4/Makefile
@@ -11,7 +11,7 @@ obj-y     := route.o inetpeer.o protocol.o \
 	     datagram.o raw.o udp.o udplite.o \
 	     arp.o icmp.o devinet.o af_inet.o  igmp.o \
 	     fib_frontend.o fib_semantics.o fib_trie.o \
-	     inet_fragment.o
+	     inet_fragment.o ping.o
 
 obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
 obj-$(CONFIG_PROC_FS) += proc.o
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 807d83c02ef..cc1463156cd 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -105,6 +105,7 @@
 #include <net/tcp.h>
 #include <net/udp.h>
 #include <net/udplite.h>
+#include <net/ping.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <net/raw.h>
@@ -153,7 +154,7 @@ void inet_sock_destruct(struct sock *sk)
 	WARN_ON(sk->sk_wmem_queued);
 	WARN_ON(sk->sk_forward_alloc);
 
-	kfree(inet->opt);
+	kfree(rcu_dereference_protected(inet->inet_opt, 1));
 	dst_release(rcu_dereference_check(sk->sk_dst_cache, 1));
 	sk_refcnt_debug_dec(sk);
 }
@@ -1008,6 +1009,14 @@ static struct inet_protosw inetsw_array[] =
 		.flags =      INET_PROTOSW_PERMANENT,
        },
 
+       {
+		.type =       SOCK_DGRAM,
+		.protocol =   IPPROTO_ICMP,
+		.prot =       &ping_prot,
+		.ops =        &inet_dgram_ops,
+		.no_check =   UDP_CSUM_DEFAULT,
+		.flags =      INET_PROTOSW_REUSE,
+       },
 
        {
 	       .type =       SOCK_RAW,
@@ -1103,14 +1112,19 @@ static int inet_sk_reselect_saddr(struct sock *sk)
 	struct inet_sock *inet = inet_sk(sk);
 	__be32 old_saddr = inet->inet_saddr;
 	__be32 daddr = inet->inet_daddr;
+	struct flowi4 *fl4;
 	struct rtable *rt;
 	__be32 new_saddr;
+	struct ip_options_rcu *inet_opt;
 
-	if (inet->opt && inet->opt->srr)
-		daddr = inet->opt->faddr;
+	inet_opt = rcu_dereference_protected(inet->inet_opt,
+					     sock_owned_by_user(sk));
+	if (inet_opt && inet_opt->opt.srr)
+		daddr = inet_opt->opt.faddr;
 
 	/* Query new route. */
-	rt = ip_route_connect(daddr, 0, RT_CONN_FLAGS(sk),
+	fl4 = &inet->cork.fl.u.ip4;
+	rt = ip_route_connect(fl4, daddr, 0, RT_CONN_FLAGS(sk),
 			      sk->sk_bound_dev_if, sk->sk_protocol,
 			      inet->inet_sport, inet->inet_dport, sk, false);
 	if (IS_ERR(rt))
@@ -1118,7 +1132,7 @@ static int inet_sk_reselect_saddr(struct sock *sk)
 
 	sk_setup_caps(sk, &rt->dst);
 
-	new_saddr = rt->rt_src;
+	new_saddr = fl4->saddr;
 
 	if (new_saddr == old_saddr)
 		return 0;
@@ -1147,6 +1161,8 @@ int inet_sk_rebuild_header(struct sock *sk)
 	struct inet_sock *inet = inet_sk(sk);
 	struct rtable *rt = (struct rtable *)__sk_dst_check(sk, 0);
 	__be32 daddr;
+	struct ip_options_rcu *inet_opt;
+	struct flowi4 *fl4;
 	int err;
 
 	/* Route is OK, nothing to do. */
@@ -1154,10 +1170,14 @@ int inet_sk_rebuild_header(struct sock *sk)
 		return 0;
 
 	/* Reroute. */
+	rcu_read_lock();
+	inet_opt = rcu_dereference(inet->inet_opt);
 	daddr = inet->inet_daddr;
-	if (inet->opt && inet->opt->srr)
-		daddr = inet->opt->faddr;
-	rt = ip_route_output_ports(sock_net(sk), sk, daddr, inet->inet_saddr,
+	if (inet_opt && inet_opt->opt.srr)
+		daddr = inet_opt->opt.faddr;
+	rcu_read_unlock();
+	fl4 = &inet->cork.fl.u.ip4;
+	rt = ip_route_output_ports(sock_net(sk), fl4, sk, daddr, inet->inet_saddr,
 				   inet->inet_dport, inet->inet_sport,
 				   sk->sk_protocol, RT_CONN_FLAGS(sk),
 				   sk->sk_bound_dev_if);
@@ -1186,7 +1206,7 @@ EXPORT_SYMBOL(inet_sk_rebuild_header);
 
 static int inet_gso_send_check(struct sk_buff *skb)
 {
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	const struct net_protocol *ops;
 	int proto;
 	int ihl;
@@ -1293,7 +1313,7 @@ static struct sk_buff **inet_gro_receive(struct sk_buff **head,
 	const struct net_protocol *ops;
 	struct sk_buff **pp = NULL;
 	struct sk_buff *p;
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	unsigned int hlen;
 	unsigned int off;
 	unsigned int id;
@@ -1516,6 +1536,7 @@ static const struct net_protocol udp_protocol = {
 
 static const struct net_protocol icmp_protocol = {
 	.handler =	icmp_rcv,
+	.err_handler =	ping_err,
 	.no_policy =	1,
 	.netns_ok =	1,
 };
@@ -1631,6 +1652,10 @@ static int __init inet_init(void)
 	if (rc)
 		goto out_unregister_udp_proto;
 
+	rc = proto_register(&ping_prot, 1);
+	if (rc)
+		goto out_unregister_raw_proto;
+
 	/*
 	 *	Tell SOCKET that we are alive...
 	 */
@@ -1686,6 +1711,8 @@ static int __init inet_init(void)
 	/* Add UDP-Lite (RFC 3828) */
 	udplite4_register();
 
+	ping_init();
+
 	/*
 	 *	Set the ICMP layer up
 	 */
@@ -1716,6 +1743,8 @@ static int __init inet_init(void)
 	rc = 0;
 out:
 	return rc;
+out_unregister_raw_proto:
+	proto_unregister(&raw_prot);
 out_unregister_udp_proto:
 	proto_unregister(&udp_prot);
 out_unregister_tcp_proto:
@@ -1740,11 +1769,15 @@ static int __init ipv4_proc_init(void)
 		goto out_tcp;
 	if (udp4_proc_init())
 		goto out_udp;
+	if (ping_proc_init())
+		goto out_ping;
 	if (ip_misc_proc_init())
 		goto out_misc;
 out:
 	return rc;
 out_misc:
+	ping_proc_exit();
+out_ping:
 	udp4_proc_exit();
 out_udp:
 	tcp4_proc_exit();
diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c
index 4286fd3cc0e..c1f4154552f 100644
--- a/net/ipv4/ah4.c
+++ b/net/ipv4/ah4.c
@@ -73,7 +73,7 @@ static inline struct scatterlist *ah_req_sg(struct crypto_ahash *ahash,
  * into IP header for icv calculation. Options are already checked
  * for validity, so paranoia is not required. */
 
-static int ip_clear_mutable_options(struct iphdr *iph, __be32 *daddr)
+static int ip_clear_mutable_options(const struct iphdr *iph, __be32 *daddr)
 {
 	unsigned char * optptr = (unsigned char*)(iph+1);
 	int  l = iph->ihl*4 - sizeof(struct iphdr);
@@ -396,7 +396,7 @@ out:
 static void ah4_err(struct sk_buff *skb, u32 info)
 {
 	struct net *net = dev_net(skb->dev);
-	struct iphdr *iph = (struct iphdr *)skb->data;
+	const struct iphdr *iph = (const struct iphdr *)skb->data;
 	struct ip_auth_hdr *ah = (struct ip_auth_hdr *)(skb->data+(iph->ihl<<2));
 	struct xfrm_state *x;
 
@@ -404,7 +404,8 @@ static void ah4_err(struct sk_buff *skb, u32 info)
 	    icmp_hdr(skb)->code != ICMP_FRAG_NEEDED)
 		return;
 
-	x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr, ah->spi, IPPROTO_AH, AF_INET);
+	x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
+			      ah->spi, IPPROTO_AH, AF_INET);
 	if (!x)
 		return;
 	printk(KERN_DEBUG "pmtu discovery on SA AH/%08x/%08x\n",
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 094e150c626..2b3c23c287c 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -112,7 +112,7 @@ int cipso_v4_rbm_strictvalid = 1;
 /* The maximum number of category ranges permitted in the ranged category tag
  * (tag #5).  You may note that the IETF draft states that the maximum number
  * of category ranges is 7, but if the low end of the last category range is
- * zero then it is possibile to fit 8 category ranges because the zero should
+ * zero then it is possible to fit 8 category ranges because the zero should
  * be omitted. */
 #define CIPSO_V4_TAG_RNG_CAT_MAX      8
 
@@ -438,7 +438,7 @@ cache_add_failure:
  *
  * Description:
  * Search the DOI definition list for a DOI definition with a DOI value that
- * matches @doi.  The caller is responsibile for calling rcu_read_[un]lock().
+ * matches @doi.  The caller is responsible for calling rcu_read_[un]lock().
  * Returns a pointer to the DOI definition on success and NULL on failure.
  */
 static struct cipso_v4_doi *cipso_v4_doi_search(u32 doi)
@@ -1293,7 +1293,7 @@ static int cipso_v4_gentag_rbm(const struct cipso_v4_doi *doi_def,
 			return ret_val;
 
 		/* This will send packets using the "optimized" format when
-		 * possibile as specified in  section 3.4.2.6 of the
+		 * possible as specified in  section 3.4.2.6 of the
 		 * CIPSO draft. */
 		if (cipso_v4_rbm_optfmt && ret_val > 0 && ret_val <= 10)
 			tag_len = 14;
@@ -1752,7 +1752,7 @@ validate_return:
 }
 
 /**
- * cipso_v4_error - Send the correct reponse for a bad packet
+ * cipso_v4_error - Send the correct response for a bad packet
  * @skb: the packet
  * @error: the error code
  * @gateway: CIPSO gateway flag
@@ -1857,6 +1857,11 @@ static int cipso_v4_genopt(unsigned char *buf, u32 buf_len,
 	return CIPSO_V4_HDR_LEN + ret_val;
 }
 
+static void opt_kfree_rcu(struct rcu_head *head)
+{
+	kfree(container_of(head, struct ip_options_rcu, rcu));
+}
+
 /**
  * cipso_v4_sock_setattr - Add a CIPSO option to a socket
  * @sk: the socket
@@ -1879,7 +1884,7 @@ int cipso_v4_sock_setattr(struct sock *sk,
 	unsigned char *buf = NULL;
 	u32 buf_len;
 	u32 opt_len;
-	struct ip_options *opt = NULL;
+	struct ip_options_rcu *old, *opt = NULL;
 	struct inet_sock *sk_inet;
 	struct inet_connection_sock *sk_conn;
 
@@ -1915,22 +1920,25 @@ int cipso_v4_sock_setattr(struct sock *sk,
 		ret_val = -ENOMEM;
 		goto socket_setattr_failure;
 	}
-	memcpy(opt->__data, buf, buf_len);
-	opt->optlen = opt_len;
-	opt->cipso = sizeof(struct iphdr);
+	memcpy(opt->opt.__data, buf, buf_len);
+	opt->opt.optlen = opt_len;
+	opt->opt.cipso = sizeof(struct iphdr);
 	kfree(buf);
 	buf = NULL;
 
 	sk_inet = inet_sk(sk);
+
+	old = rcu_dereference_protected(sk_inet->inet_opt, sock_owned_by_user(sk));
 	if (sk_inet->is_icsk) {
 		sk_conn = inet_csk(sk);
-		if (sk_inet->opt)
-			sk_conn->icsk_ext_hdr_len -= sk_inet->opt->optlen;
-		sk_conn->icsk_ext_hdr_len += opt->optlen;
+		if (old)
+			sk_conn->icsk_ext_hdr_len -= old->opt.optlen;
+		sk_conn->icsk_ext_hdr_len += opt->opt.optlen;
 		sk_conn->icsk_sync_mss(sk, sk_conn->icsk_pmtu_cookie);
 	}
-	opt = xchg(&sk_inet->opt, opt);
-	kfree(opt);
+	rcu_assign_pointer(sk_inet->inet_opt, opt);
+	if (old)
+		call_rcu(&old->rcu, opt_kfree_rcu);
 
 	return 0;
 
@@ -1960,7 +1968,7 @@ int cipso_v4_req_setattr(struct request_sock *req,
 	unsigned char *buf = NULL;
 	u32 buf_len;
 	u32 opt_len;
-	struct ip_options *opt = NULL;
+	struct ip_options_rcu *opt = NULL;
 	struct inet_request_sock *req_inet;
 
 	/* We allocate the maximum CIPSO option size here so we are probably
@@ -1988,15 +1996,16 @@ int cipso_v4_req_setattr(struct request_sock *req,
 		ret_val = -ENOMEM;
 		goto req_setattr_failure;
 	}
-	memcpy(opt->__data, buf, buf_len);
-	opt->optlen = opt_len;
-	opt->cipso = sizeof(struct iphdr);
+	memcpy(opt->opt.__data, buf, buf_len);
+	opt->opt.optlen = opt_len;
+	opt->opt.cipso = sizeof(struct iphdr);
 	kfree(buf);
 	buf = NULL;
 
 	req_inet = inet_rsk(req);
 	opt = xchg(&req_inet->opt, opt);
-	kfree(opt);
+	if (opt)
+		call_rcu(&opt->rcu, opt_kfree_rcu);
 
 	return 0;
 
@@ -2016,34 +2025,34 @@ req_setattr_failure:
  * values on failure.
  *
  */
-static int cipso_v4_delopt(struct ip_options **opt_ptr)
+static int cipso_v4_delopt(struct ip_options_rcu **opt_ptr)
 {
 	int hdr_delta = 0;
-	struct ip_options *opt = *opt_ptr;
+	struct ip_options_rcu *opt = *opt_ptr;
 
-	if (opt->srr || opt->rr || opt->ts || opt->router_alert) {
+	if (opt->opt.srr || opt->opt.rr || opt->opt.ts || opt->opt.router_alert) {
 		u8 cipso_len;
 		u8 cipso_off;
 		unsigned char *cipso_ptr;
 		int iter;
 		int optlen_new;
 
-		cipso_off = opt->cipso - sizeof(struct iphdr);
-		cipso_ptr = &opt->__data[cipso_off];
+		cipso_off = opt->opt.cipso - sizeof(struct iphdr);
+		cipso_ptr = &opt->opt.__data[cipso_off];
 		cipso_len = cipso_ptr[1];
 
-		if (opt->srr > opt->cipso)
-			opt->srr -= cipso_len;
-		if (opt->rr > opt->cipso)
-			opt->rr -= cipso_len;
-		if (opt->ts > opt->cipso)
-			opt->ts -= cipso_len;
-		if (opt->router_alert > opt->cipso)
-			opt->router_alert -= cipso_len;
-		opt->cipso = 0;
+		if (opt->opt.srr > opt->opt.cipso)
+			opt->opt.srr -= cipso_len;
+		if (opt->opt.rr > opt->opt.cipso)
+			opt->opt.rr -= cipso_len;
+		if (opt->opt.ts > opt->opt.cipso)
+			opt->opt.ts -= cipso_len;
+		if (opt->opt.router_alert > opt->opt.cipso)
+			opt->opt.router_alert -= cipso_len;
+		opt->opt.cipso = 0;
 
 		memmove(cipso_ptr, cipso_ptr + cipso_len,
-			opt->optlen - cipso_off - cipso_len);
+			opt->opt.optlen - cipso_off - cipso_len);
 
 		/* determining the new total option length is tricky because of
 		 * the padding necessary, the only thing i can think to do at
@@ -2052,21 +2061,21 @@ static int cipso_v4_delopt(struct ip_options **opt_ptr)
 		 * from there we can determine the new total option length */
 		iter = 0;
 		optlen_new = 0;
-		while (iter < opt->optlen)
-			if (opt->__data[iter] != IPOPT_NOP) {
-				iter += opt->__data[iter + 1];
+		while (iter < opt->opt.optlen)
+			if (opt->opt.__data[iter] != IPOPT_NOP) {
+				iter += opt->opt.__data[iter + 1];
 				optlen_new = iter;
 			} else
 				iter++;
-		hdr_delta = opt->optlen;
-		opt->optlen = (optlen_new + 3) & ~3;
-		hdr_delta -= opt->optlen;
+		hdr_delta = opt->opt.optlen;
+		opt->opt.optlen = (optlen_new + 3) & ~3;
+		hdr_delta -= opt->opt.optlen;
 	} else {
 		/* only the cipso option was present on the socket so we can
 		 * remove the entire option struct */
 		*opt_ptr = NULL;
-		hdr_delta = opt->optlen;
-		kfree(opt);
+		hdr_delta = opt->opt.optlen;
+		call_rcu(&opt->rcu, opt_kfree_rcu);
 	}
 
 	return hdr_delta;
@@ -2083,15 +2092,15 @@ static int cipso_v4_delopt(struct ip_options **opt_ptr)
 void cipso_v4_sock_delattr(struct sock *sk)
 {
 	int hdr_delta;
-	struct ip_options *opt;
+	struct ip_options_rcu *opt;
 	struct inet_sock *sk_inet;
 
 	sk_inet = inet_sk(sk);
-	opt = sk_inet->opt;
-	if (opt == NULL || opt->cipso == 0)
+	opt = rcu_dereference_protected(sk_inet->inet_opt, 1);
+	if (opt == NULL || opt->opt.cipso == 0)
 		return;
 
-	hdr_delta = cipso_v4_delopt(&sk_inet->opt);
+	hdr_delta = cipso_v4_delopt(&sk_inet->inet_opt);
 	if (sk_inet->is_icsk && hdr_delta > 0) {
 		struct inet_connection_sock *sk_conn = inet_csk(sk);
 		sk_conn->icsk_ext_hdr_len -= hdr_delta;
@@ -2109,12 +2118,12 @@ void cipso_v4_sock_delattr(struct sock *sk)
  */
 void cipso_v4_req_delattr(struct request_sock *req)
 {
-	struct ip_options *opt;
+	struct ip_options_rcu *opt;
 	struct inet_request_sock *req_inet;
 
 	req_inet = inet_rsk(req);
 	opt = req_inet->opt;
-	if (opt == NULL || opt->cipso == 0)
+	if (opt == NULL || opt->opt.cipso == 0)
 		return;
 
 	cipso_v4_delopt(&req_inet->opt);
@@ -2184,14 +2193,18 @@ getattr_return:
  */
 int cipso_v4_sock_getattr(struct sock *sk, struct netlbl_lsm_secattr *secattr)
 {
-	struct ip_options *opt;
+	struct ip_options_rcu *opt;
+	int res = -ENOMSG;
 
-	opt = inet_sk(sk)->opt;
-	if (opt == NULL || opt->cipso == 0)
-		return -ENOMSG;
-
-	return cipso_v4_getattr(opt->__data + opt->cipso - sizeof(struct iphdr),
-				secattr);
+	rcu_read_lock();
+	opt = rcu_dereference(inet_sk(sk)->inet_opt);
+	if (opt && opt->opt.cipso)
+		res = cipso_v4_getattr(opt->opt.__data +
+						opt->opt.cipso -
+						sizeof(struct iphdr),
+				       secattr);
+	rcu_read_unlock();
+	return res;
 }
 
 /**
diff --git a/net/ipv4/datagram.c b/net/ipv4/datagram.c
index 85bd24ca4f6..424fafbc8cb 100644
--- a/net/ipv4/datagram.c
+++ b/net/ipv4/datagram.c
@@ -24,6 +24,7 @@ int ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct sockaddr_in *usin = (struct sockaddr_in *) uaddr;
+	struct flowi4 *fl4;
 	struct rtable *rt;
 	__be32 saddr;
 	int oif;
@@ -38,6 +39,8 @@ int ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 
 	sk_dst_reset(sk);
 
+	lock_sock(sk);
+
 	oif = sk->sk_bound_dev_if;
 	saddr = inet->inet_saddr;
 	if (ipv4_is_multicast(usin->sin_addr.s_addr)) {
@@ -46,7 +49,8 @@ int ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 		if (!saddr)
 			saddr = inet->mc_addr;
 	}
-	rt = ip_route_connect(usin->sin_addr.s_addr, saddr,
+	fl4 = &inet->cork.fl.u.ip4;
+	rt = ip_route_connect(fl4, usin->sin_addr.s_addr, saddr,
 			      RT_CONN_FLAGS(sk), oif,
 			      sk->sk_protocol,
 			      inet->inet_sport, usin->sin_port, sk, true);
@@ -54,26 +58,30 @@ int ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 		err = PTR_ERR(rt);
 		if (err == -ENETUNREACH)
 			IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
-		return err;
+		goto out;
 	}
 
 	if ((rt->rt_flags & RTCF_BROADCAST) && !sock_flag(sk, SOCK_BROADCAST)) {
 		ip_rt_put(rt);
-		return -EACCES;
+		err = -EACCES;
+		goto out;
 	}
 	if (!inet->inet_saddr)
-		inet->inet_saddr = rt->rt_src;	/* Update source address */
+		inet->inet_saddr = fl4->saddr;	/* Update source address */
 	if (!inet->inet_rcv_saddr) {
-		inet->inet_rcv_saddr = rt->rt_src;
+		inet->inet_rcv_saddr = fl4->saddr;
 		if (sk->sk_prot->rehash)
 			sk->sk_prot->rehash(sk);
 	}
-	inet->inet_daddr = rt->rt_dst;
+	inet->inet_daddr = fl4->daddr;
 	inet->inet_dport = usin->sin_port;
 	sk->sk_state = TCP_ESTABLISHED;
 	inet->inet_id = jiffies;
 
 	sk_dst_set(sk, &rt->dst);
-	return 0;
+	err = 0;
+out:
+	release_sock(sk);
+	return err;
 }
 EXPORT_SYMBOL(ip4_datagram_connect);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 5345b0bee6d..0d4a184af16 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1369,7 +1369,7 @@ errout:
 
 static size_t inet_get_link_af_size(const struct net_device *dev)
 {
-	struct in_device *in_dev = __in_dev_get_rtnl(dev);
+	struct in_device *in_dev = rcu_dereference_rtnl(dev->ip_ptr);
 
 	if (!in_dev)
 		return 0;
@@ -1379,7 +1379,7 @@ static size_t inet_get_link_af_size(const struct net_device *dev)
 
 static int inet_fill_link_af(struct sk_buff *skb, const struct net_device *dev)
 {
-	struct in_device *in_dev = __in_dev_get_rtnl(dev);
+	struct in_device *in_dev = rcu_dereference_rtnl(dev->ip_ptr);
 	struct nlattr *nla;
 	int i;
 
@@ -1680,7 +1680,7 @@ static void __devinet_sysctl_unregister(struct ipv4_devconf *cnf)
 		return;
 
 	cnf->sysctl = NULL;
-	unregister_sysctl_table(t->sysctl_header);
+	unregister_net_sysctl_table(t->sysctl_header);
 	kfree(t->dev_name);
 	kfree(t);
 }
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 03f994bcf7d..a5b413416da 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -276,7 +276,7 @@ error:
 
 static int esp_input_done2(struct sk_buff *skb, int err)
 {
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	struct xfrm_state *x = xfrm_input_state(skb);
 	struct esp_data *esp = x->data;
 	struct crypto_aead *aead = esp->aead;
@@ -484,7 +484,7 @@ static u32 esp4_get_mtu(struct xfrm_state *x, int mtu)
 static void esp4_err(struct sk_buff *skb, u32 info)
 {
 	struct net *net = dev_net(skb->dev);
-	struct iphdr *iph = (struct iphdr *)skb->data;
+	const struct iphdr *iph = (const struct iphdr *)skb->data;
 	struct ip_esp_hdr *esph = (struct ip_esp_hdr *)(skb->data+(iph->ihl<<2));
 	struct xfrm_state *x;
 
@@ -492,7 +492,8 @@ static void esp4_err(struct sk_buff *skb, u32 info)
 	    icmp_hdr(skb)->code != ICMP_FRAG_NEEDED)
 		return;
 
-	x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr, esph->spi, IPPROTO_ESP, AF_INET);
+	x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
+			      esph->spi, IPPROTO_ESP, AF_INET);
 	if (!x)
 		return;
 	NETDEBUG(KERN_DEBUG "pmtu discovery on SA ESP/%08x/%08x\n",
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 451088330bb..22524716fe7 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -44,6 +44,7 @@
 #include <net/arp.h>
 #include <net/ip_fib.h>
 #include <net/rtnetlink.h>
+#include <net/xfrm.h>
 
 #ifndef CONFIG_IP_MULTIPLE_TABLES
 
@@ -188,9 +189,9 @@ EXPORT_SYMBOL(inet_dev_addr_type);
  * - check, that packet arrived from expected physical interface.
  * called with rcu_read_lock()
  */
-int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
-			struct net_device *dev, __be32 *spec_dst,
-			u32 *itag, u32 mark)
+int fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst, u8 tos,
+			int oif, struct net_device *dev, __be32 *spec_dst,
+			u32 *itag)
 {
 	struct in_device *in_dev;
 	struct flowi4 fl4;
@@ -202,7 +203,6 @@ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
 
 	fl4.flowi4_oif = 0;
 	fl4.flowi4_iif = oif;
-	fl4.flowi4_mark = mark;
 	fl4.daddr = src;
 	fl4.saddr = dst;
 	fl4.flowi4_tos = tos;
@@ -212,10 +212,12 @@ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
 	in_dev = __in_dev_get_rcu(dev);
 	if (in_dev) {
 		no_addr = in_dev->ifa_list == NULL;
-		rpf = IN_DEV_RPFILTER(in_dev);
+
+		/* Ignore rp_filter for packets protected by IPsec. */
+		rpf = secpath_exists(skb) ? 0 : IN_DEV_RPFILTER(in_dev);
+
 		accept_local = IN_DEV_ACCEPT_LOCAL(in_dev);
-		if (mark && !IN_DEV_SRC_VMARK(in_dev))
-			fl4.flowi4_mark = 0;
+		fl4.flowi4_mark = IN_DEV_SRC_VMARK(in_dev) ? skb->mark : 0;
 	}
 
 	if (in_dev == NULL)
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 641a5a2a9f9..33e2c35b74b 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -141,18 +141,8 @@ const struct fib_prop fib_props[RTN_MAX + 1] = {
 	},
 };
 
-
 /* Release a nexthop info record */
 
-static void free_fib_info_rcu(struct rcu_head *head)
-{
-	struct fib_info *fi = container_of(head, struct fib_info, rcu);
-
-	if (fi->fib_metrics != (u32 *) dst_default_metrics)
-		kfree(fi->fib_metrics);
-	kfree(fi);
-}
-
 void free_fib_info(struct fib_info *fi)
 {
 	if (fi->fib_dead == 0) {
@@ -166,7 +156,7 @@ void free_fib_info(struct fib_info *fi)
 	} endfor_nexthops(fi);
 	fib_info_cnt--;
 	release_net(fi->fib_net);
-	call_rcu(&fi->rcu, free_fib_info_rcu);
+	kfree_rcu(fi, rcu);
 }
 
 void fib_release_info(struct fib_info *fi)
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index b92c86f6e9b..c779ce96e5b 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -12,7 +12,7 @@
  *
  *   Hans Liss <hans.liss@its.uu.se>  Uppsala Universitet
  *
- * This work is based on the LPC-trie which is originally descibed in:
+ * This work is based on the LPC-trie which is originally described in:
  *
  * An experimental study of compression methods for dynamic tries
  * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
@@ -126,7 +126,7 @@ struct tnode {
 		struct work_struct work;
 		struct tnode *tnode_free;
 	};
-	struct rt_trie_node *child[0];
+	struct rt_trie_node __rcu *child[0];
 };
 
 #ifdef CONFIG_IP_FIB_TRIE_STATS
@@ -151,7 +151,7 @@ struct trie_stat {
 };
 
 struct trie {
-	struct rt_trie_node *trie;
+	struct rt_trie_node __rcu *trie;
 #ifdef CONFIG_IP_FIB_TRIE_STATS
 	struct trie_use_stats stats;
 #endif
@@ -177,16 +177,29 @@ static const int sync_pages = 128;
 static struct kmem_cache *fn_alias_kmem __read_mostly;
 static struct kmem_cache *trie_leaf_kmem __read_mostly;
 
-static inline struct tnode *node_parent(struct rt_trie_node *node)
+/*
+ * caller must hold RTNL
+ */
+static inline struct tnode *node_parent(const struct rt_trie_node *node)
 {
-	return (struct tnode *)(node->parent & ~NODE_TYPE_MASK);
+	unsigned long parent;
+
+	parent = rcu_dereference_index_check(node->parent, lockdep_rtnl_is_held());
+
+	return (struct tnode *)(parent & ~NODE_TYPE_MASK);
 }
 
-static inline struct tnode *node_parent_rcu(struct rt_trie_node *node)
+/*
+ * caller must hold RCU read lock or RTNL
+ */
+static inline struct tnode *node_parent_rcu(const struct rt_trie_node *node)
 {
-	struct tnode *ret = node_parent(node);
+	unsigned long parent;
 
-	return rcu_dereference_rtnl(ret);
+	parent = rcu_dereference_index_check(node->parent, rcu_read_lock_held() ||
+							   lockdep_rtnl_is_held());
+
+	return (struct tnode *)(parent & ~NODE_TYPE_MASK);
 }
 
 /* Same as rcu_assign_pointer
@@ -198,18 +211,24 @@ static inline void node_set_parent(struct rt_trie_node *node, struct tnode *ptr)
 	node->parent = (unsigned long)ptr | NODE_TYPE(node);
 }
 
-static inline struct rt_trie_node *tnode_get_child(struct tnode *tn, unsigned int i)
+/*
+ * caller must hold RTNL
+ */
+static inline struct rt_trie_node *tnode_get_child(const struct tnode *tn, unsigned int i)
 {
 	BUG_ON(i >= 1U << tn->bits);
 
-	return tn->child[i];
+	return rtnl_dereference(tn->child[i]);
 }
 
-static inline struct rt_trie_node *tnode_get_child_rcu(struct tnode *tn, unsigned int i)
+/*
+ * caller must hold RCU read lock or RTNL
+ */
+static inline struct rt_trie_node *tnode_get_child_rcu(const struct tnode *tn, unsigned int i)
 {
-	struct rt_trie_node *ret = tnode_get_child(tn, i);
+	BUG_ON(i >= 1U << tn->bits);
 
-	return rcu_dereference_rtnl(ret);
+	return rcu_dereference_rtnl(tn->child[i]);
 }
 
 static inline int tnode_child_length(const struct tnode *tn)
@@ -350,14 +369,9 @@ static inline void free_leaf(struct leaf *l)
 	call_rcu_bh(&l->rcu, __leaf_free_rcu);
 }
 
-static void __leaf_info_free_rcu(struct rcu_head *head)
-{
-	kfree(container_of(head, struct leaf_info, rcu));
-}
-
 static inline void free_leaf_info(struct leaf_info *leaf)
 {
-	call_rcu(&leaf->rcu, __leaf_info_free_rcu);
+	kfree_rcu(leaf, rcu);
 }
 
 static struct tnode *tnode_alloc(size_t size)
@@ -487,7 +501,7 @@ static inline void put_child(struct trie *t, struct tnode *tn, int i,
 static void tnode_put_child_reorg(struct tnode *tn, int i, struct rt_trie_node *n,
 				  int wasfull)
 {
-	struct rt_trie_node *chi = tn->child[i];
+	struct rt_trie_node *chi = rtnl_dereference(tn->child[i]);
 	int isfull;
 
 	BUG_ON(i >= 1<<tn->bits);
@@ -665,7 +679,7 @@ one_child:
 		for (i = 0; i < tnode_child_length(tn); i++) {
 			struct rt_trie_node *n;
 
-			n = tn->child[i];
+			n = rtnl_dereference(tn->child[i]);
 			if (!n)
 				continue;
 
@@ -679,6 +693,20 @@ one_child:
 	return (struct rt_trie_node *) tn;
 }
 
+
+static void tnode_clean_free(struct tnode *tn)
+{
+	int i;
+	struct tnode *tofree;
+
+	for (i = 0; i < tnode_child_length(tn); i++) {
+		tofree = (struct tnode *)rtnl_dereference(tn->child[i]);
+		if (tofree)
+			tnode_free(tofree);
+	}
+	tnode_free(tn);
+}
+
 static struct tnode *inflate(struct trie *t, struct tnode *tn)
 {
 	struct tnode *oldtnode = tn;
@@ -755,8 +783,8 @@ static struct tnode *inflate(struct trie *t, struct tnode *tn)
 		inode = (struct tnode *) node;
 
 		if (inode->bits == 1) {
-			put_child(t, tn, 2*i, inode->child[0]);
-			put_child(t, tn, 2*i+1, inode->child[1]);
+			put_child(t, tn, 2*i, rtnl_dereference(inode->child[0]));
+			put_child(t, tn, 2*i+1, rtnl_dereference(inode->child[1]));
 
 			tnode_free_safe(inode);
 			continue;
@@ -797,8 +825,8 @@ static struct tnode *inflate(struct trie *t, struct tnode *tn)
 
 		size = tnode_child_length(left);
 		for (j = 0; j < size; j++) {
-			put_child(t, left, j, inode->child[j]);
-			put_child(t, right, j, inode->child[j + size]);
+			put_child(t, left, j, rtnl_dereference(inode->child[j]));
+			put_child(t, right, j, rtnl_dereference(inode->child[j + size]));
 		}
 		put_child(t, tn, 2*i, resize(t, left));
 		put_child(t, tn, 2*i+1, resize(t, right));
@@ -808,18 +836,8 @@ static struct tnode *inflate(struct trie *t, struct tnode *tn)
 	tnode_free_safe(oldtnode);
 	return tn;
 nomem:
-	{
-		int size = tnode_child_length(tn);
-		int j;
-
-		for (j = 0; j < size; j++)
-			if (tn->child[j])
-				tnode_free((struct tnode *)tn->child[j]);
-
-		tnode_free(tn);
-
-		return ERR_PTR(-ENOMEM);
-	}
+	tnode_clean_free(tn);
+	return ERR_PTR(-ENOMEM);
 }
 
 static struct tnode *halve(struct trie *t, struct tnode *tn)
@@ -890,18 +908,8 @@ static struct tnode *halve(struct trie *t, struct tnode *tn)
 	tnode_free_safe(oldtnode);
 	return tn;
 nomem:
-	{
-		int size = tnode_child_length(tn);
-		int j;
-
-		for (j = 0; j < size; j++)
-			if (tn->child[j])
-				tnode_free((struct tnode *)tn->child[j]);
-
-		tnode_free(tn);
-
-		return ERR_PTR(-ENOMEM);
-	}
+	tnode_clean_free(tn);
+	return ERR_PTR(-ENOMEM);
 }
 
 /* readside must use rcu_read_lock currently dump routines
@@ -1033,7 +1041,7 @@ static struct list_head *fib_insert_node(struct trie *t, u32 key, int plen)
 	t_key cindex;
 
 	pos = 0;
-	n = t->trie;
+	n = rtnl_dereference(t->trie);
 
 	/* If we point to NULL, stop. Either the tree is empty and we should
 	 * just put a new leaf in if, or we have reached an empty child slot,
@@ -1319,6 +1327,9 @@ int fib_table_insert(struct fib_table *tb, struct fib_config *cfg)
 		}
 	}
 
+	if (!plen)
+		tb->tb_num_default++;
+
 	list_add_tail_rcu(&new_fa->fa_list,
 			  (fa ? &fa->fa_list : fa_head));
 
@@ -1684,6 +1695,9 @@ int fib_table_delete(struct fib_table *tb, struct fib_config *cfg)
 
 	list_del_rcu(&fa->fa_list);
 
+	if (!plen)
+		tb->tb_num_default--;
+
 	if (list_empty(fa_head)) {
 		hlist_del_rcu(&li->hlist);
 		free_leaf_info(li);
@@ -1756,7 +1770,7 @@ static struct leaf *leaf_walk_rcu(struct tnode *p, struct rt_trie_node *c)
 				continue;
 
 			if (IS_LEAF(c)) {
-				prefetch(p->child[idx]);
+				prefetch(rcu_dereference_rtnl(p->child[idx]));
 				return (struct leaf *) c;
 			}
 
@@ -1974,13 +1988,11 @@ struct fib_table *fib_trie_table(u32 id)
 
 	tb->tb_id = id;
 	tb->tb_default = -1;
+	tb->tb_num_default = 0;
 
 	t = (struct trie *) tb->tb_data;
 	memset(t, 0, sizeof(*t));
 
-	if (id == RT_TABLE_LOCAL)
-		pr_info("IPv4 FIB: Using LC-trie version %s\n", VERSION);
-
 	return tb;
 }
 
@@ -2272,7 +2284,7 @@ static void *fib_trie_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 
 	/* walk rest of this hash chain */
 	h = tb->tb_id & (FIB_TABLE_HASHSZ - 1);
-	while ( (tb_node = rcu_dereference(tb->tb_hlist.next)) ) {
+	while ((tb_node = rcu_dereference(hlist_next_rcu(&tb->tb_hlist)))) {
 		tb = hlist_entry(tb_node, struct fib_table, tb_hlist);
 		n = fib_trie_get_first(iter, (struct trie *) tb->tb_data);
 		if (n)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index a91dc161108..5395e45dcce 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -83,6 +83,7 @@
 #include <net/tcp.h>
 #include <net/udp.h>
 #include <net/raw.h>
+#include <net/ping.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <linux/errno.h>
@@ -108,8 +109,7 @@ struct icmp_bxm {
 		__be32	       times[3];
 	} data;
 	int head_len;
-	struct ip_options replyopts;
-	unsigned char  optbuf[40];
+	struct ip_options_data replyopts;
 };
 
 /* An array of errno for error messages from dest unreach. */
@@ -234,7 +234,7 @@ static inline void icmp_xmit_unlock(struct sock *sk)
  */
 
 static inline bool icmpv4_xrlim_allow(struct net *net, struct rtable *rt,
-		int type, int code)
+				      struct flowi4 *fl4, int type, int code)
 {
 	struct dst_entry *dst = &rt->dst;
 	bool rc = true;
@@ -253,7 +253,7 @@ static inline bool icmpv4_xrlim_allow(struct net *net, struct rtable *rt,
 	/* Limit if icmp type is enabled in ratemask. */
 	if ((1 << type) & net->ipv4.sysctl_icmp_ratemask) {
 		if (!rt->peer)
-			rt_bind_peer(rt, 1);
+			rt_bind_peer(rt, fl4->daddr, 1);
 		rc = inet_peer_xrlim_allow(rt->peer,
 					   net->ipv4.sysctl_icmp_ratelimit);
 	}
@@ -291,13 +291,14 @@ static int icmp_glue_bits(void *from, char *to, int offset, int len, int odd,
 }
 
 static void icmp_push_reply(struct icmp_bxm *icmp_param,
+			    struct flowi4 *fl4,
 			    struct ipcm_cookie *ipc, struct rtable **rt)
 {
 	struct sock *sk;
 	struct sk_buff *skb;
 
 	sk = icmp_sk(dev_net((*rt)->dst.dev));
-	if (ip_append_data(sk, icmp_glue_bits, icmp_param,
+	if (ip_append_data(sk, fl4, icmp_glue_bits, icmp_param,
 			   icmp_param->data_len+icmp_param->head_len,
 			   icmp_param->head_len,
 			   ipc, rt, MSG_DONTWAIT) < 0) {
@@ -316,7 +317,7 @@ static void icmp_push_reply(struct icmp_bxm *icmp_param,
 						 icmp_param->head_len, csum);
 		icmph->checksum = csum_fold(csum);
 		skb->ip_summed = CHECKSUM_NONE;
-		ip_push_pending_frames(sk);
+		ip_push_pending_frames(sk, fl4);
 	}
 }
 
@@ -329,11 +330,12 @@ static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
 	struct ipcm_cookie ipc;
 	struct rtable *rt = skb_rtable(skb);
 	struct net *net = dev_net(rt->dst.dev);
+	struct flowi4 fl4;
 	struct sock *sk;
 	struct inet_sock *inet;
 	__be32 daddr;
 
-	if (ip_options_echo(&icmp_param->replyopts, skb))
+	if (ip_options_echo(&icmp_param->replyopts.opt.opt, skb))
 		return;
 
 	sk = icmp_xmit_lock(net);
@@ -344,65 +346,60 @@ static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
 	icmp_param->data.icmph.checksum = 0;
 
 	inet->tos = ip_hdr(skb)->tos;
-	daddr = ipc.addr = rt->rt_src;
+	daddr = ipc.addr = ip_hdr(skb)->saddr;
 	ipc.opt = NULL;
 	ipc.tx_flags = 0;
-	if (icmp_param->replyopts.optlen) {
-		ipc.opt = &icmp_param->replyopts;
-		if (ipc.opt->srr)
-			daddr = icmp_param->replyopts.faddr;
+	if (icmp_param->replyopts.opt.opt.optlen) {
+		ipc.opt = &icmp_param->replyopts.opt;
+		if (ipc.opt->opt.srr)
+			daddr = icmp_param->replyopts.opt.opt.faddr;
 	}
-	{
-		struct flowi4 fl4 = {
-			.daddr = daddr,
-			.saddr = rt->rt_spec_dst,
-			.flowi4_tos = RT_TOS(ip_hdr(skb)->tos),
-			.flowi4_proto = IPPROTO_ICMP,
-		};
-		security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
-		rt = ip_route_output_key(net, &fl4);
-		if (IS_ERR(rt))
-			goto out_unlock;
-	}
-	if (icmpv4_xrlim_allow(net, rt, icmp_param->data.icmph.type,
+	memset(&fl4, 0, sizeof(fl4));
+	fl4.daddr = daddr;
+	fl4.saddr = rt->rt_spec_dst;
+	fl4.flowi4_tos = RT_TOS(ip_hdr(skb)->tos);
+	fl4.flowi4_proto = IPPROTO_ICMP;
+	security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
+	rt = ip_route_output_key(net, &fl4);
+	if (IS_ERR(rt))
+		goto out_unlock;
+	if (icmpv4_xrlim_allow(net, rt, &fl4, icmp_param->data.icmph.type,
 			       icmp_param->data.icmph.code))
-		icmp_push_reply(icmp_param, &ipc, &rt);
+		icmp_push_reply(icmp_param, &fl4, &ipc, &rt);
 	ip_rt_put(rt);
 out_unlock:
 	icmp_xmit_unlock(sk);
 }
 
-static struct rtable *icmp_route_lookup(struct net *net, struct sk_buff *skb_in,
-					struct iphdr *iph,
+static struct rtable *icmp_route_lookup(struct net *net,
+					struct flowi4 *fl4,
+					struct sk_buff *skb_in,
+					const struct iphdr *iph,
 					__be32 saddr, u8 tos,
 					int type, int code,
 					struct icmp_bxm *param)
 {
-	struct flowi4 fl4 = {
-		.daddr = (param->replyopts.srr ?
-			  param->replyopts.faddr : iph->saddr),
-		.saddr = saddr,
-		.flowi4_tos = RT_TOS(tos),
-		.flowi4_proto = IPPROTO_ICMP,
-		.fl4_icmp_type = type,
-		.fl4_icmp_code = code,
-	};
 	struct rtable *rt, *rt2;
 	int err;
 
-	security_skb_classify_flow(skb_in, flowi4_to_flowi(&fl4));
-	rt = __ip_route_output_key(net, &fl4);
+	memset(fl4, 0, sizeof(*fl4));
+	fl4->daddr = (param->replyopts.opt.opt.srr ?
+		      param->replyopts.opt.opt.faddr : iph->saddr);
+	fl4->saddr = saddr;
+	fl4->flowi4_tos = RT_TOS(tos);
+	fl4->flowi4_proto = IPPROTO_ICMP;
+	fl4->fl4_icmp_type = type;
+	fl4->fl4_icmp_code = code;
+	security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4));
+	rt = __ip_route_output_key(net, fl4);
 	if (IS_ERR(rt))
 		return rt;
 
 	/* No need to clone since we're just using its address. */
 	rt2 = rt;
 
-	if (!fl4.saddr)
-		fl4.saddr = rt->rt_src;
-
 	rt = (struct rtable *) xfrm_lookup(net, &rt->dst,
-					   flowi4_to_flowi(&fl4), NULL, 0);
+					   flowi4_to_flowi(fl4), NULL, 0);
 	if (!IS_ERR(rt)) {
 		if (rt != rt2)
 			return rt;
@@ -411,19 +408,19 @@ static struct rtable *icmp_route_lookup(struct net *net, struct sk_buff *skb_in,
 	} else
 		return rt;
 
-	err = xfrm_decode_session_reverse(skb_in, flowi4_to_flowi(&fl4), AF_INET);
+	err = xfrm_decode_session_reverse(skb_in, flowi4_to_flowi(fl4), AF_INET);
 	if (err)
 		goto relookup_failed;
 
-	if (inet_addr_type(net, fl4.saddr) == RTN_LOCAL) {
-		rt2 = __ip_route_output_key(net, &fl4);
+	if (inet_addr_type(net, fl4->saddr) == RTN_LOCAL) {
+		rt2 = __ip_route_output_key(net, fl4);
 		if (IS_ERR(rt2))
 			err = PTR_ERR(rt2);
 	} else {
 		struct flowi4 fl4_2 = {};
 		unsigned long orefdst;
 
-		fl4_2.daddr = fl4.saddr;
+		fl4_2.daddr = fl4->saddr;
 		rt2 = ip_route_output_key(net, &fl4_2);
 		if (IS_ERR(rt2)) {
 			err = PTR_ERR(rt2);
@@ -431,7 +428,7 @@ static struct rtable *icmp_route_lookup(struct net *net, struct sk_buff *skb_in,
 		}
 		/* Ugh! */
 		orefdst = skb_in->_skb_refdst; /* save old refdst */
-		err = ip_route_input(skb_in, fl4.daddr, fl4.saddr,
+		err = ip_route_input(skb_in, fl4->daddr, fl4->saddr,
 				     RT_TOS(tos), rt2->dst.dev);
 
 		dst_release(&rt2->dst);
@@ -443,7 +440,7 @@ static struct rtable *icmp_route_lookup(struct net *net, struct sk_buff *skb_in,
 		goto relookup_failed;
 
 	rt2 = (struct rtable *) xfrm_lookup(net, &rt2->dst,
-					    flowi4_to_flowi(&fl4), NULL,
+					    flowi4_to_flowi(fl4), NULL,
 					    XFRM_LOOKUP_ICMP);
 	if (!IS_ERR(rt2)) {
 		dst_release(&rt->dst);
@@ -482,6 +479,7 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 	struct icmp_bxm icmp_param;
 	struct rtable *rt = skb_rtable(skb_in);
 	struct ipcm_cookie ipc;
+	struct flowi4 fl4;
 	__be32 saddr;
 	u8  tos;
 	struct net *net;
@@ -581,7 +579,7 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 					   IPTOS_PREC_INTERNETCONTROL) :
 					  iph->tos;
 
-	if (ip_options_echo(&icmp_param.replyopts, skb_in))
+	if (ip_options_echo(&icmp_param.replyopts.opt.opt, skb_in))
 		goto out_unlock;
 
 
@@ -597,15 +595,15 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 	icmp_param.offset = skb_network_offset(skb_in);
 	inet_sk(sk)->tos = tos;
 	ipc.addr = iph->saddr;
-	ipc.opt = &icmp_param.replyopts;
+	ipc.opt = &icmp_param.replyopts.opt;
 	ipc.tx_flags = 0;
 
-	rt = icmp_route_lookup(net, skb_in, iph, saddr, tos,
+	rt = icmp_route_lookup(net, &fl4, skb_in, iph, saddr, tos,
 			       type, code, &icmp_param);
 	if (IS_ERR(rt))
 		goto out_unlock;
 
-	if (!icmpv4_xrlim_allow(net, rt, type, code))
+	if (!icmpv4_xrlim_allow(net, rt, &fl4, type, code))
 		goto ende;
 
 	/* RFC says return as much as we can without exceeding 576 bytes. */
@@ -613,7 +611,7 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 	room = dst_mtu(&rt->dst);
 	if (room > 576)
 		room = 576;
-	room -= sizeof(struct iphdr) + icmp_param.replyopts.optlen;
+	room -= sizeof(struct iphdr) + icmp_param.replyopts.opt.opt.optlen;
 	room -= sizeof(struct icmphdr);
 
 	icmp_param.data_len = skb_in->len - icmp_param.offset;
@@ -621,7 +619,7 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 		icmp_param.data_len = room;
 	icmp_param.head_len = sizeof(struct icmphdr);
 
-	icmp_push_reply(&icmp_param, &ipc, &rt);
+	icmp_push_reply(&icmp_param, &fl4, &ipc, &rt);
 ende:
 	ip_rt_put(rt);
 out_unlock:
@@ -637,7 +635,7 @@ EXPORT_SYMBOL(icmp_send);
 
 static void icmp_unreach(struct sk_buff *skb)
 {
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	struct icmphdr *icmph;
 	int hash, protocol;
 	const struct net_protocol *ipprot;
@@ -656,7 +654,7 @@ static void icmp_unreach(struct sk_buff *skb)
 		goto out_err;
 
 	icmph = icmp_hdr(skb);
-	iph   = (struct iphdr *)skb->data;
+	iph   = (const struct iphdr *)skb->data;
 
 	if (iph->ihl < 5) /* Mangled header, drop. */
 		goto out_err;
@@ -704,7 +702,7 @@ static void icmp_unreach(struct sk_buff *skb)
 	 */
 
 	/*
-	 *	Check the other end isnt violating RFC 1122. Some routers send
+	 *	Check the other end isn't violating RFC 1122. Some routers send
 	 *	bogus responses to broadcast frames. If you see this message
 	 *	first check your netmask matches at both ends, if it does then
 	 *	get the other vendor to fix their kit.
@@ -729,7 +727,7 @@ static void icmp_unreach(struct sk_buff *skb)
 	if (!pskb_may_pull(skb, iph->ihl * 4 + 8))
 		goto out;
 
-	iph = (struct iphdr *)skb->data;
+	iph = (const struct iphdr *)skb->data;
 	protocol = iph->protocol;
 
 	/*
@@ -758,7 +756,7 @@ out_err:
 
 static void icmp_redirect(struct sk_buff *skb)
 {
-	struct iphdr *iph;
+	const struct iphdr *iph;
 
 	if (skb->len < sizeof(struct iphdr))
 		goto out_err;
@@ -769,7 +767,7 @@ static void icmp_redirect(struct sk_buff *skb)
 	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
 		goto out;
 
-	iph = (struct iphdr *)skb->data;
+	iph = (const struct iphdr *)skb->data;
 
 	switch (icmp_hdr(skb)->code & 7) {
 	case ICMP_REDIR_NET:
@@ -784,6 +782,15 @@ static void icmp_redirect(struct sk_buff *skb)
 			       iph->saddr, skb->dev);
 		break;
 	}
+
+	/* Ping wants to see redirects.
+         * Let's pretend they are errors of sorts... */
+	if (iph->protocol == IPPROTO_ICMP &&
+	    iph->ihl >= 5 &&
+	    pskb_may_pull(skb, (iph->ihl<<2)+8)) {
+		ping_err(skb, icmp_hdr(skb)->un.gateway);
+	}
+
 out:
 	return;
 out_err:
@@ -933,12 +940,12 @@ static void icmp_address_reply(struct sk_buff *skb)
 		BUG_ON(mp == NULL);
 		for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
 			if (*mp == ifa->ifa_mask &&
-			    inet_ifa_match(rt->rt_src, ifa))
+			    inet_ifa_match(ip_hdr(skb)->saddr, ifa))
 				break;
 		}
 		if (!ifa && net_ratelimit()) {
 			printk(KERN_INFO "Wrong address mask %pI4 from %s/%pI4\n",
-			       mp, dev->name, &rt->rt_src);
+			       mp, dev->name, &ip_hdr(skb)->saddr);
 		}
 	}
 }
@@ -1044,7 +1051,7 @@ error:
  */
 static const struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
 	[ICMP_ECHOREPLY] = {
-		.handler = icmp_discard,
+		.handler = ping_rcv,
 	},
 	[1] = {
 		.handler = icmp_discard,
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 1fd3d9ce839..672e476c8c8 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -149,17 +149,11 @@ static void ip_mc_clear_src(struct ip_mc_list *pmc);
 static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 			 int sfcount, __be32 *psfsrc, int delta);
 
-
-static void ip_mc_list_reclaim(struct rcu_head *head)
-{
-	kfree(container_of(head, struct ip_mc_list, rcu));
-}
-
 static void ip_ma_put(struct ip_mc_list *im)
 {
 	if (atomic_dec_and_test(&im->refcnt)) {
 		in_dev_put(im->interface);
-		call_rcu(&im->rcu, ip_mc_list_reclaim);
+		kfree_rcu(im, rcu);
 	}
 }
 
@@ -309,6 +303,7 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 	struct iphdr *pip;
 	struct igmpv3_report *pig;
 	struct net *net = dev_net(dev);
+	struct flowi4 fl4;
 
 	while (1) {
 		skb = alloc_skb(size + LL_ALLOCATED_SPACE(dev),
@@ -321,18 +316,13 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 	}
 	igmp_skb_size(skb) = size;
 
-	rt = ip_route_output_ports(net, NULL, IGMPV3_ALL_MCR, 0,
+	rt = ip_route_output_ports(net, &fl4, NULL, IGMPV3_ALL_MCR, 0,
 				   0, 0,
 				   IPPROTO_IGMP, 0, dev->ifindex);
 	if (IS_ERR(rt)) {
 		kfree_skb(skb);
 		return NULL;
 	}
-	if (rt->rt_src == 0) {
-		kfree_skb(skb);
-		ip_rt_put(rt);
-		return NULL;
-	}
 
 	skb_dst_set(skb, &rt->dst);
 	skb->dev = dev;
@@ -348,8 +338,8 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 	pip->tos      = 0xc0;
 	pip->frag_off = htons(IP_DF);
 	pip->ttl      = 1;
-	pip->daddr    = rt->rt_dst;
-	pip->saddr    = rt->rt_src;
+	pip->daddr    = fl4.daddr;
+	pip->saddr    = fl4.saddr;
 	pip->protocol = IPPROTO_IGMP;
 	pip->tot_len  = 0;	/* filled in later */
 	ip_select_ident(pip, &rt->dst, NULL);
@@ -655,6 +645,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 	struct net_device *dev = in_dev->dev;
 	struct net *net = dev_net(dev);
 	__be32	group = pmc ? pmc->multiaddr : 0;
+	struct flowi4 fl4;
 	__be32	dst;
 
 	if (type == IGMPV3_HOST_MEMBERSHIP_REPORT)
@@ -664,17 +655,12 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 	else
 		dst = group;
 
-	rt = ip_route_output_ports(net, NULL, dst, 0,
+	rt = ip_route_output_ports(net, &fl4, NULL, dst, 0,
 				   0, 0,
 				   IPPROTO_IGMP, 0, dev->ifindex);
 	if (IS_ERR(rt))
 		return -1;
 
-	if (rt->rt_src == 0) {
-		ip_rt_put(rt);
-		return -1;
-	}
-
 	skb = alloc_skb(IGMP_SIZE+LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
 	if (skb == NULL) {
 		ip_rt_put(rt);
@@ -695,7 +681,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 	iph->frag_off = htons(IP_DF);
 	iph->ttl      = 1;
 	iph->daddr    = dst;
-	iph->saddr    = rt->rt_src;
+	iph->saddr    = fl4.saddr;
 	iph->protocol = IPPROTO_IGMP;
 	ip_select_ident(iph, &rt->dst, NULL);
 	((u8*)&iph[1])[0] = IPOPT_RA;
@@ -1836,12 +1822,6 @@ done:
 }
 EXPORT_SYMBOL(ip_mc_join_group);
 
-static void ip_sf_socklist_reclaim(struct rcu_head *rp)
-{
-	kfree(container_of(rp, struct ip_sf_socklist, rcu));
-	/* sk_omem_alloc should have been decreased by the caller*/
-}
-
 static int ip_mc_leave_src(struct sock *sk, struct ip_mc_socklist *iml,
 			   struct in_device *in_dev)
 {
@@ -1858,18 +1838,10 @@ static int ip_mc_leave_src(struct sock *sk, struct ip_mc_socklist *iml,
 	rcu_assign_pointer(iml->sflist, NULL);
 	/* decrease mem now to avoid the memleak warning */
 	atomic_sub(IP_SFLSIZE(psf->sl_max), &sk->sk_omem_alloc);
-	call_rcu(&psf->rcu, ip_sf_socklist_reclaim);
+	kfree_rcu(psf, rcu);
 	return err;
 }
 
-
-static void ip_mc_socklist_reclaim(struct rcu_head *rp)
-{
-	kfree(container_of(rp, struct ip_mc_socklist, rcu));
-	/* sk_omem_alloc should have been decreased by the caller*/
-}
-
-
 /*
  *	Ask a socket to leave a group.
  */
@@ -1909,7 +1881,7 @@ int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr)
 		rtnl_unlock();
 		/* decrease mem now to avoid the memleak warning */
 		atomic_sub(sizeof(*iml), &sk->sk_omem_alloc);
-		call_rcu(&iml->rcu, ip_mc_socklist_reclaim);
+		kfree_rcu(iml, rcu);
 		return 0;
 	}
 	if (!in_dev)
@@ -2026,7 +1998,7 @@ int ip_mc_source(int add, int omode, struct sock *sk, struct
 				newpsl->sl_addr[i] = psl->sl_addr[i];
 			/* decrease mem now to avoid the memleak warning */
 			atomic_sub(IP_SFLSIZE(psl->sl_max), &sk->sk_omem_alloc);
-			call_rcu(&psl->rcu, ip_sf_socklist_reclaim);
+			kfree_rcu(psl, rcu);
 		}
 		rcu_assign_pointer(pmc->sflist, newpsl);
 		psl = newpsl;
@@ -2127,7 +2099,7 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 			psl->sl_count, psl->sl_addr, 0);
 		/* decrease mem now to avoid the memleak warning */
 		atomic_sub(IP_SFLSIZE(psl->sl_max), &sk->sk_omem_alloc);
-		call_rcu(&psl->rcu, ip_sf_socklist_reclaim);
+		kfree_rcu(psl, rcu);
 	} else
 		(void) ip_mc_del_src(in_dev, &msf->imsf_multiaddr, pmc->sfmode,
 			0, NULL, 0);
@@ -2324,7 +2296,7 @@ void ip_mc_drop_socket(struct sock *sk)
 			ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr);
 		/* decrease mem now to avoid the memleak warning */
 		atomic_sub(sizeof(*iml), &sk->sk_omem_alloc);
-		call_rcu(&iml->rcu, ip_mc_socklist_reclaim);
+		kfree_rcu(iml, rcu);
 	}
 	rtnl_unlock();
 }
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 6c0b7f4a3d7..61fac4cabc7 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -73,7 +73,7 @@ int inet_csk_bind_conflict(const struct sock *sk,
 		     !sk2->sk_bound_dev_if ||
 		     sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) {
 			if (!reuse || !sk2->sk_reuse ||
-			    ((1 << sk2->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))) {
+			    sk2->sk_state == TCP_LISTEN) {
 				const __be32 sk2_rcv_saddr = sk_rcv_saddr(sk2);
 				if (!sk2_rcv_saddr || !sk_rcv_saddr(sk) ||
 				    sk2_rcv_saddr == sk_rcv_saddr(sk))
@@ -122,8 +122,7 @@ again:
 					    (tb->num_owners < smallest_size || smallest_size == -1)) {
 						smallest_size = tb->num_owners;
 						smallest_rover = rover;
-						if (atomic_read(&hashinfo->bsockets) > (high - low) + 1 &&
-						    !inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb)) {
+						if (atomic_read(&hashinfo->bsockets) > (high - low) + 1) {
 							spin_unlock(&head->lock);
 							snum = smallest_rover;
 							goto have_snum;
@@ -351,30 +350,24 @@ void inet_csk_reset_keepalive_timer(struct sock *sk, unsigned long len)
 EXPORT_SYMBOL(inet_csk_reset_keepalive_timer);
 
 struct dst_entry *inet_csk_route_req(struct sock *sk,
+				     struct flowi4 *fl4,
 				     const struct request_sock *req)
 {
 	struct rtable *rt;
 	const struct inet_request_sock *ireq = inet_rsk(req);
-	struct ip_options *opt = inet_rsk(req)->opt;
-	struct flowi4 fl4 = {
-		.flowi4_oif = sk->sk_bound_dev_if,
-		.flowi4_mark = sk->sk_mark,
-		.daddr = ((opt && opt->srr) ?
-			  opt->faddr : ireq->rmt_addr),
-		.saddr = ireq->loc_addr,
-		.flowi4_tos = RT_CONN_FLAGS(sk),
-		.flowi4_proto = sk->sk_protocol,
-		.flowi4_flags = inet_sk_flowi_flags(sk),
-		.fl4_sport = inet_sk(sk)->inet_sport,
-		.fl4_dport = ireq->rmt_port,
-	};
+	struct ip_options_rcu *opt = inet_rsk(req)->opt;
 	struct net *net = sock_net(sk);
 
-	security_req_classify_flow(req, flowi4_to_flowi(&fl4));
-	rt = ip_route_output_flow(net, &fl4, sk);
+	flowi4_init_output(fl4, sk->sk_bound_dev_if, sk->sk_mark,
+			   RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE,
+			   sk->sk_protocol, inet_sk_flowi_flags(sk),
+			   (opt && opt->opt.srr) ? opt->opt.faddr : ireq->rmt_addr,
+			   ireq->loc_addr, ireq->rmt_port, inet_sk(sk)->inet_sport);
+	security_req_classify_flow(req, flowi4_to_flowi(fl4));
+	rt = ip_route_output_flow(net, fl4, sk);
 	if (IS_ERR(rt))
 		goto no_route;
-	if (opt && opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
+	if (opt && opt->opt.is_strictroute && fl4->daddr != rt->rt_gateway)
 		goto route_err;
 	return &rt->dst;
 
@@ -386,6 +379,39 @@ no_route:
 }
 EXPORT_SYMBOL_GPL(inet_csk_route_req);
 
+struct dst_entry *inet_csk_route_child_sock(struct sock *sk,
+					    struct sock *newsk,
+					    const struct request_sock *req)
+{
+	const struct inet_request_sock *ireq = inet_rsk(req);
+	struct inet_sock *newinet = inet_sk(newsk);
+	struct ip_options_rcu *opt = ireq->opt;
+	struct net *net = sock_net(sk);
+	struct flowi4 *fl4;
+	struct rtable *rt;
+
+	fl4 = &newinet->cork.fl.u.ip4;
+	flowi4_init_output(fl4, sk->sk_bound_dev_if, sk->sk_mark,
+			   RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE,
+			   sk->sk_protocol, inet_sk_flowi_flags(sk),
+			   (opt && opt->opt.srr) ? opt->opt.faddr : ireq->rmt_addr,
+			   ireq->loc_addr, ireq->rmt_port, inet_sk(sk)->inet_sport);
+	security_req_classify_flow(req, flowi4_to_flowi(fl4));
+	rt = ip_route_output_flow(net, fl4, sk);
+	if (IS_ERR(rt))
+		goto no_route;
+	if (opt && opt->opt.is_strictroute && fl4->daddr != rt->rt_gateway)
+		goto route_err;
+	return &rt->dst;
+
+route_err:
+	ip_rt_put(rt);
+no_route:
+	IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(inet_csk_route_child_sock);
+
 static inline u32 inet_synq_hash(const __be32 raddr, const __be16 rport,
 				 const u32 rnd, const u32 synq_hsize)
 {
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 2ada17129fc..6ffe94ca5bc 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -124,7 +124,7 @@ static int inet_csk_diag_fill(struct sock *sk,
 
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
 	if (r->idiag_family == AF_INET6) {
-		struct ipv6_pinfo *np = inet6_sk(sk);
+		const struct ipv6_pinfo *np = inet6_sk(sk);
 
 		ipv6_addr_copy((struct in6_addr *)r->id.idiag_src,
 			       &np->rcv_saddr);
diff --git a/net/ipv4/inet_lro.c b/net/ipv4/inet_lro.c
index 47038cb6c13..85a0f75dae6 100644
--- a/net/ipv4/inet_lro.c
+++ b/net/ipv4/inet_lro.c
@@ -51,8 +51,8 @@ MODULE_DESCRIPTION("Large Receive Offload (ipv4 / tcp)");
  * Basic tcp checks whether packet is suitable for LRO
  */
 
-static int lro_tcp_ip_check(struct iphdr *iph, struct tcphdr *tcph,
-			    int len, struct net_lro_desc *lro_desc)
+static int lro_tcp_ip_check(const struct iphdr *iph, const struct tcphdr *tcph,
+			    int len, const struct net_lro_desc *lro_desc)
 {
         /* check ip header: don't aggregate padded frames */
 	if (ntohs(iph->tot_len) != len)
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index dd1b20eca1a..9df4e635fb5 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -354,7 +354,8 @@ static void inetpeer_free_rcu(struct rcu_head *head)
 }
 
 /* May be called with local BH enabled. */
-static void unlink_from_pool(struct inet_peer *p, struct inet_peer_base *base)
+static void unlink_from_pool(struct inet_peer *p, struct inet_peer_base *base,
+			     struct inet_peer __rcu **stack[PEER_MAXDEPTH])
 {
 	int do_free;
 
@@ -368,7 +369,6 @@ static void unlink_from_pool(struct inet_peer *p, struct inet_peer_base *base)
 	 * We use refcnt=-1 to alert lockless readers this entry is deleted.
 	 */
 	if (atomic_cmpxchg(&p->refcnt, 1, -1) == 1) {
-		struct inet_peer __rcu **stack[PEER_MAXDEPTH];
 		struct inet_peer __rcu ***stackptr, ***delp;
 		if (lookup(&p->daddr, stack, base) != p)
 			BUG();
@@ -422,7 +422,7 @@ static struct inet_peer_base *peer_to_base(struct inet_peer *p)
 }
 
 /* May be called with local BH enabled. */
-static int cleanup_once(unsigned long ttl)
+static int cleanup_once(unsigned long ttl, struct inet_peer __rcu **stack[PEER_MAXDEPTH])
 {
 	struct inet_peer *p = NULL;
 
@@ -454,7 +454,7 @@ static int cleanup_once(unsigned long ttl)
 		 * happen because of entry limits in route cache. */
 		return -1;
 
-	unlink_from_pool(p, peer_to_base(p));
+	unlink_from_pool(p, peer_to_base(p), stack);
 	return 0;
 }
 
@@ -524,7 +524,7 @@ struct inet_peer *inet_getpeer(struct inetpeer_addr *daddr, int create)
 
 	if (base->total >= inet_peer_threshold)
 		/* Remove one less-recently-used entry. */
-		cleanup_once(0);
+		cleanup_once(0, stack);
 
 	return p;
 }
@@ -540,6 +540,7 @@ static void peer_check_expire(unsigned long dummy)
 {
 	unsigned long now = jiffies;
 	int ttl, total;
+	struct inet_peer __rcu **stack[PEER_MAXDEPTH];
 
 	total = compute_total();
 	if (total >= inet_peer_threshold)
@@ -548,7 +549,7 @@ static void peer_check_expire(unsigned long dummy)
 		ttl = inet_peer_maxttl
 				- (inet_peer_maxttl - inet_peer_minttl) / HZ *
 					total / inet_peer_threshold * HZ;
-	while (!cleanup_once(ttl)) {
+	while (!cleanup_once(ttl, stack)) {
 		if (jiffies != now)
 			break;
 	}
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index 99461f09320..3b34d1c8627 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -84,7 +84,7 @@ int ip_forward(struct sk_buff *skb)
 
 	rt = skb_rtable(skb);
 
-	if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
+	if (opt->is_strictroute && ip_hdr(skb)->daddr != rt->rt_gateway)
 		goto sr_failed;
 
 	if (unlikely(skb->len > dst_mtu(&rt->dst) && !skb_is_gso(skb) &&
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index a1151b8adf3..0ad6035f636 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -77,22 +77,40 @@ struct ipq {
 	struct inet_peer *peer;
 };
 
-#define IPFRAG_ECN_CLEAR  0x01 /* one frag had INET_ECN_NOT_ECT */
-#define IPFRAG_ECN_SET_CE 0x04 /* one frag had INET_ECN_CE */
+/* RFC 3168 support :
+ * We want to check ECN values of all fragments, do detect invalid combinations.
+ * In ipq->ecn, we store the OR value of each ip4_frag_ecn() fragment value.
+ */
+#define	IPFRAG_ECN_NOT_ECT	0x01 /* one frag had ECN_NOT_ECT */
+#define	IPFRAG_ECN_ECT_1	0x02 /* one frag had ECN_ECT_1 */
+#define	IPFRAG_ECN_ECT_0	0x04 /* one frag had ECN_ECT_0 */
+#define	IPFRAG_ECN_CE		0x08 /* one frag had ECN_CE */
 
 static inline u8 ip4_frag_ecn(u8 tos)
 {
-	tos = (tos & INET_ECN_MASK) + 1;
-	/*
-	 * After the last operation we have (in binary):
-	 * INET_ECN_NOT_ECT => 001
-	 * INET_ECN_ECT_1   => 010
-	 * INET_ECN_ECT_0   => 011
-	 * INET_ECN_CE      => 100
-	 */
-	return (tos & 2) ? 0 : tos;
+	return 1 << (tos & INET_ECN_MASK);
 }
 
+/* Given the OR values of all fragments, apply RFC 3168 5.3 requirements
+ * Value : 0xff if frame should be dropped.
+ *         0 or INET_ECN_CE value, to be ORed in to final iph->tos field
+ */
+static const u8 ip4_frag_ecn_table[16] = {
+	/* at least one fragment had CE, and others ECT_0 or ECT_1 */
+	[IPFRAG_ECN_CE | IPFRAG_ECN_ECT_0]			= INET_ECN_CE,
+	[IPFRAG_ECN_CE | IPFRAG_ECN_ECT_1]			= INET_ECN_CE,
+	[IPFRAG_ECN_CE | IPFRAG_ECN_ECT_0 | IPFRAG_ECN_ECT_1]	= INET_ECN_CE,
+
+	/* invalid combinations : drop frame */
+	[IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_CE] = 0xff,
+	[IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_ECT_0] = 0xff,
+	[IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_ECT_1] = 0xff,
+	[IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_ECT_0 | IPFRAG_ECN_ECT_1] = 0xff,
+	[IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_CE | IPFRAG_ECN_ECT_0] = 0xff,
+	[IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_CE | IPFRAG_ECN_ECT_1] = 0xff,
+	[IPFRAG_ECN_NOT_ECT | IPFRAG_ECN_CE | IPFRAG_ECN_ECT_0 | IPFRAG_ECN_ECT_1] = 0xff,
+};
+
 static struct inet_frags ip4_frags;
 
 int ip_frag_nqueues(struct net *net)
@@ -223,31 +241,30 @@ static void ip_expire(unsigned long arg)
 
 	if ((qp->q.last_in & INET_FRAG_FIRST_IN) && qp->q.fragments != NULL) {
 		struct sk_buff *head = qp->q.fragments;
+		const struct iphdr *iph;
+		int err;
 
 		rcu_read_lock();
 		head->dev = dev_get_by_index_rcu(net, qp->iif);
 		if (!head->dev)
 			goto out_rcu_unlock;
 
+		/* skb dst is stale, drop it, and perform route lookup again */
+		skb_dst_drop(head);
+		iph = ip_hdr(head);
+		err = ip_route_input_noref(head, iph->daddr, iph->saddr,
+					   iph->tos, head->dev);
+		if (err)
+			goto out_rcu_unlock;
+
 		/*
-		 * Only search router table for the head fragment,
-		 * when defraging timeout at PRE_ROUTING HOOK.
+		 * Only an end host needs to send an ICMP
+		 * "Fragment Reassembly Timeout" message, per RFC792.
 		 */
-		if (qp->user == IP_DEFRAG_CONNTRACK_IN && !skb_dst(head)) {
-			const struct iphdr *iph = ip_hdr(head);
-			int err = ip_route_input(head, iph->daddr, iph->saddr,
-						 iph->tos, head->dev);
-			if (unlikely(err))
-				goto out_rcu_unlock;
-
-			/*
-			 * Only an end host needs to send an ICMP
-			 * "Fragment Reassembly Timeout" message, per RFC792.
-			 */
-			if (skb_rtable(head)->rt_type != RTN_LOCAL)
-				goto out_rcu_unlock;
+		if (qp->user == IP_DEFRAG_CONNTRACK_IN &&
+		    skb_rtable(head)->rt_type != RTN_LOCAL)
+			goto out_rcu_unlock;
 
-		}
 
 		/* Send an ICMP "Fragment Reassembly Timeout" message. */
 		icmp_send(head, ICMP_TIME_EXCEEDED, ICMP_EXC_FRAGTIME, 0);
@@ -525,9 +542,15 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 	int len;
 	int ihlen;
 	int err;
+	u8 ecn;
 
 	ipq_kill(qp);
 
+	ecn = ip4_frag_ecn_table[qp->ecn];
+	if (unlikely(ecn == 0xff)) {
+		err = -EINVAL;
+		goto out_fail;
+	}
 	/* Make the one we just received the head. */
 	if (prev) {
 		head = prev->next;
@@ -606,17 +629,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 	iph = ip_hdr(head);
 	iph->frag_off = 0;
 	iph->tot_len = htons(len);
-	/* RFC3168 5.3 Fragmentation support
-	 * If one fragment had INET_ECN_NOT_ECT,
-	 *	reassembled frame also has INET_ECN_NOT_ECT
-	 * Elif one fragment had INET_ECN_CE
-	 *	reassembled frame also has INET_ECN_CE
-	 */
-	if (qp->ecn & IPFRAG_ECN_CLEAR)
-		iph->tos &= ~INET_ECN_MASK;
-	else if (qp->ecn & IPFRAG_ECN_SET_CE)
-		iph->tos |= INET_ECN_CE;
-
+	iph->tos |= ecn;
 	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMOKS);
 	qp->q.fragments = NULL;
 	qp->q.fragments_tail = NULL;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index da5941f18c3..8871067560d 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -413,11 +413,6 @@ static struct ip_tunnel *ipgre_tunnel_locate(struct net *net,
 
 	dev_net_set(dev, net);
 
-	if (strchr(name, '%')) {
-		if (dev_alloc_name(dev, name) < 0)
-			goto failed_free;
-	}
-
 	nt = netdev_priv(dev);
 	nt->parms = *parms;
 	dev->rtnl_link_ops = &ipgre_link_ops;
@@ -462,7 +457,7 @@ static void ipgre_err(struct sk_buff *skb, u32 info)
    by themself???
  */
 
-	struct iphdr *iph = (struct iphdr *)skb->data;
+	const struct iphdr *iph = (const struct iphdr *)skb->data;
 	__be16	     *p = (__be16*)(skb->data+(iph->ihl<<2));
 	int grehlen = (iph->ihl<<2) + 4;
 	const int type = icmp_hdr(skb)->type;
@@ -534,7 +529,7 @@ out:
 	rcu_read_unlock();
 }
 
-static inline void ipgre_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
+static inline void ipgre_ecn_decapsulate(const struct iphdr *iph, struct sk_buff *skb)
 {
 	if (INET_ECN_is_ce(iph->tos)) {
 		if (skb->protocol == htons(ETH_P_IP)) {
@@ -546,19 +541,19 @@ static inline void ipgre_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
 }
 
 static inline u8
-ipgre_ecn_encapsulate(u8 tos, struct iphdr *old_iph, struct sk_buff *skb)
+ipgre_ecn_encapsulate(u8 tos, const struct iphdr *old_iph, struct sk_buff *skb)
 {
 	u8 inner = 0;
 	if (skb->protocol == htons(ETH_P_IP))
 		inner = old_iph->tos;
 	else if (skb->protocol == htons(ETH_P_IPV6))
-		inner = ipv6_get_dsfield((struct ipv6hdr *)old_iph);
+		inner = ipv6_get_dsfield((const struct ipv6hdr *)old_iph);
 	return INET_ECN_encapsulate(tos, inner);
 }
 
 static int ipgre_rcv(struct sk_buff *skb)
 {
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	u8     *h;
 	__be16    flags;
 	__sum16   csum = 0;
@@ -697,8 +692,9 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
 	struct pcpu_tstats *tstats;
-	struct iphdr  *old_iph = ip_hdr(skb);
-	struct iphdr  *tiph;
+	const struct iphdr  *old_iph = ip_hdr(skb);
+	const struct iphdr  *tiph;
+	struct flowi4 fl4;
 	u8     tos;
 	__be16 df;
 	struct rtable *rt;     			/* Route to the other host */
@@ -714,7 +710,7 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
 
 	if (dev->header_ops && dev->type == ARPHRD_IPGRE) {
 		gre_hlen = 0;
-		tiph = (struct iphdr *)skb->data;
+		tiph = (const struct iphdr *)skb->data;
 	} else {
 		gre_hlen = tunnel->hlen;
 		tiph = &tunnel->parms.iph;
@@ -735,14 +731,14 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
 		}
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 		else if (skb->protocol == htons(ETH_P_IPV6)) {
-			struct in6_addr *addr6;
+			const struct in6_addr *addr6;
 			int addr_type;
 			struct neighbour *neigh = skb_dst(skb)->neighbour;
 
 			if (neigh == NULL)
 				goto tx_error;
 
-			addr6 = (struct in6_addr *)&neigh->primary_key;
+			addr6 = (const struct in6_addr *)&neigh->primary_key;
 			addr_type = ipv6_addr_type(addr6);
 
 			if (addr_type == IPV6_ADDR_ANY) {
@@ -766,10 +762,10 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
 		if (skb->protocol == htons(ETH_P_IP))
 			tos = old_iph->tos;
 		else if (skb->protocol == htons(ETH_P_IPV6))
-			tos = ipv6_get_dsfield((struct ipv6hdr *)old_iph);
+			tos = ipv6_get_dsfield((const struct ipv6hdr *)old_iph);
 	}
 
-	rt = ip_route_output_gre(dev_net(dev), dst, tiph->saddr,
+	rt = ip_route_output_gre(dev_net(dev), &fl4, dst, tiph->saddr,
 				 tunnel->parms.o_key, RT_TOS(tos),
 				 tunnel->parms.link);
 	if (IS_ERR(rt)) {
@@ -873,15 +869,15 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
 	iph->frag_off		=	df;
 	iph->protocol		=	IPPROTO_GRE;
 	iph->tos		=	ipgre_ecn_encapsulate(tos, old_iph, skb);
-	iph->daddr		=	rt->rt_dst;
-	iph->saddr		=	rt->rt_src;
+	iph->daddr		=	fl4.daddr;
+	iph->saddr		=	fl4.saddr;
 
 	if ((iph->ttl = tiph->ttl) == 0) {
 		if (skb->protocol == htons(ETH_P_IP))
 			iph->ttl = old_iph->ttl;
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 		else if (skb->protocol == htons(ETH_P_IPV6))
-			iph->ttl = ((struct ipv6hdr *)old_iph)->hop_limit;
+			iph->ttl = ((const struct ipv6hdr *)old_iph)->hop_limit;
 #endif
 		else
 			iph->ttl = ip4_dst_hoplimit(&rt->dst);
@@ -927,7 +923,7 @@ static int ipgre_tunnel_bind_dev(struct net_device *dev)
 {
 	struct net_device *tdev = NULL;
 	struct ip_tunnel *tunnel;
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	int hlen = LL_MAX_HEADER;
 	int mtu = ETH_DATA_LEN;
 	int addend = sizeof(struct iphdr) + 4;
@@ -938,12 +934,14 @@ static int ipgre_tunnel_bind_dev(struct net_device *dev)
 	/* Guess output device to choose reasonable mtu and needed_headroom */
 
 	if (iph->daddr) {
-		struct rtable *rt = ip_route_output_gre(dev_net(dev),
-							iph->daddr, iph->saddr,
-							tunnel->parms.o_key,
-							RT_TOS(iph->tos),
-							tunnel->parms.link);
-
+		struct flowi4 fl4;
+		struct rtable *rt;
+
+		rt = ip_route_output_gre(dev_net(dev), &fl4,
+					 iph->daddr, iph->saddr,
+					 tunnel->parms.o_key,
+					 RT_TOS(iph->tos),
+					 tunnel->parms.link);
 		if (!IS_ERR(rt)) {
 			tdev = rt->dst.dev;
 			ip_rt_put(rt);
@@ -1180,7 +1178,7 @@ static int ipgre_header(struct sk_buff *skb, struct net_device *dev,
 
 static int ipgre_header_parse(const struct sk_buff *skb, unsigned char *haddr)
 {
-	struct iphdr *iph = (struct iphdr *) skb_mac_header(skb);
+	const struct iphdr *iph = (const struct iphdr *) skb_mac_header(skb);
 	memcpy(haddr, &iph->saddr, 4);
 	return 4;
 }
@@ -1196,13 +1194,15 @@ static int ipgre_open(struct net_device *dev)
 	struct ip_tunnel *t = netdev_priv(dev);
 
 	if (ipv4_is_multicast(t->parms.iph.daddr)) {
-		struct rtable *rt = ip_route_output_gre(dev_net(dev),
-							t->parms.iph.daddr,
-							t->parms.iph.saddr,
-							t->parms.o_key,
-							RT_TOS(t->parms.iph.tos),
-							t->parms.link);
-
+		struct flowi4 fl4;
+		struct rtable *rt;
+
+		rt = ip_route_output_gre(dev_net(dev), &fl4,
+					 t->parms.iph.daddr,
+					 t->parms.iph.saddr,
+					 t->parms.o_key,
+					 RT_TOS(t->parms.iph.tos),
+					 t->parms.link);
 		if (IS_ERR(rt))
 			return -EADDRNOTAVAIL;
 		dev = rt->dst.dev;
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index d7b2b0987a3..c8f48efc5fd 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -268,7 +268,7 @@ int ip_local_deliver(struct sk_buff *skb)
 static inline int ip_rcv_options(struct sk_buff *skb)
 {
 	struct ip_options *opt;
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	struct net_device *dev = skb->dev;
 
 	/* It looks as overkill, because not all
@@ -374,7 +374,7 @@ drop:
  */
 int ip_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
 {
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	u32 len;
 
 	/* When the interface is in promisc. mode, drop all the crap
diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c
index 28a736f3442..c3118e1cd3b 100644
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -36,8 +36,8 @@
  * saddr is address of outgoing interface.
  */
 
-void ip_options_build(struct sk_buff * skb, struct ip_options * opt,
-			    __be32 daddr, struct rtable *rt, int is_frag)
+void ip_options_build(struct sk_buff *skb, struct ip_options *opt,
+		      __be32 daddr, struct rtable *rt, int is_frag)
 {
 	unsigned char *iph = skb_network_header(skb);
 
@@ -50,9 +50,9 @@ void ip_options_build(struct sk_buff * skb, struct ip_options * opt,
 
 	if (!is_frag) {
 		if (opt->rr_needaddr)
-			ip_rt_get_source(iph+opt->rr+iph[opt->rr+2]-5, rt);
+			ip_rt_get_source(iph+opt->rr+iph[opt->rr+2]-5, skb, rt);
 		if (opt->ts_needaddr)
-			ip_rt_get_source(iph+opt->ts+iph[opt->ts+2]-9, rt);
+			ip_rt_get_source(iph+opt->ts+iph[opt->ts+2]-9, skb, rt);
 		if (opt->ts_needtime) {
 			struct timespec tv;
 			__be32 midtime;
@@ -83,9 +83,9 @@ void ip_options_build(struct sk_buff * skb, struct ip_options * opt,
  * NOTE: dopt cannot point to skb.
  */
 
-int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
+int ip_options_echo(struct ip_options *dopt, struct sk_buff *skb)
 {
-	struct ip_options *sopt;
+	const struct ip_options *sopt;
 	unsigned char *sptr, *dptr;
 	int soffset, doffset;
 	int	optlen;
@@ -95,10 +95,8 @@ int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
 
 	sopt = &(IPCB(skb)->opt);
 
-	if (sopt->optlen == 0) {
-		dopt->optlen = 0;
+	if (sopt->optlen == 0)
 		return 0;
-	}
 
 	sptr = skb_network_header(skb);
 	dptr = dopt->__data;
@@ -157,7 +155,7 @@ int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
 		dopt->optlen += optlen;
 	}
 	if (sopt->srr) {
-		unsigned char * start = sptr+sopt->srr;
+		unsigned char *start = sptr+sopt->srr;
 		__be32 faddr;
 
 		optlen  = start[1];
@@ -329,7 +327,7 @@ int ip_options_compile(struct net *net,
 					pp_ptr = optptr + 2;
 					goto error;
 				}
-				if (skb) {
+				if (rt) {
 					memcpy(&optptr[optptr[2]-1], &rt->rt_spec_dst, 4);
 					opt->is_changed = 1;
 				}
@@ -371,7 +369,7 @@ int ip_options_compile(struct net *net,
 						goto error;
 					}
 					opt->ts = optptr - iph;
-					if (skb) {
+					if (rt)  {
 						memcpy(&optptr[optptr[2]-1], &rt->rt_spec_dst, 4);
 						timeptr = (__be32*)&optptr[optptr[2]+3];
 					}
@@ -499,19 +497,19 @@ void ip_options_undo(struct ip_options * opt)
 	}
 }
 
-static struct ip_options *ip_options_get_alloc(const int optlen)
+static struct ip_options_rcu *ip_options_get_alloc(const int optlen)
 {
-	return kzalloc(sizeof(struct ip_options) + ((optlen + 3) & ~3),
+	return kzalloc(sizeof(struct ip_options_rcu) + ((optlen + 3) & ~3),
 		       GFP_KERNEL);
 }
 
-static int ip_options_get_finish(struct net *net, struct ip_options **optp,
-				 struct ip_options *opt, int optlen)
+static int ip_options_get_finish(struct net *net, struct ip_options_rcu **optp,
+				 struct ip_options_rcu *opt, int optlen)
 {
 	while (optlen & 3)
-		opt->__data[optlen++] = IPOPT_END;
-	opt->optlen = optlen;
-	if (optlen && ip_options_compile(net, opt, NULL)) {
+		opt->opt.__data[optlen++] = IPOPT_END;
+	opt->opt.optlen = optlen;
+	if (optlen && ip_options_compile(net, &opt->opt, NULL)) {
 		kfree(opt);
 		return -EINVAL;
 	}
@@ -520,29 +518,29 @@ static int ip_options_get_finish(struct net *net, struct ip_options **optp,
 	return 0;
 }
 
-int ip_options_get_from_user(struct net *net, struct ip_options **optp,
+int ip_options_get_from_user(struct net *net, struct ip_options_rcu **optp,
 			     unsigned char __user *data, int optlen)
 {
-	struct ip_options *opt = ip_options_get_alloc(optlen);
+	struct ip_options_rcu *opt = ip_options_get_alloc(optlen);
 
 	if (!opt)
 		return -ENOMEM;
-	if (optlen && copy_from_user(opt->__data, data, optlen)) {
+	if (optlen && copy_from_user(opt->opt.__data, data, optlen)) {
 		kfree(opt);
 		return -EFAULT;
 	}
 	return ip_options_get_finish(net, optp, opt, optlen);
 }
 
-int ip_options_get(struct net *net, struct ip_options **optp,
+int ip_options_get(struct net *net, struct ip_options_rcu **optp,
 		   unsigned char *data, int optlen)
 {
-	struct ip_options *opt = ip_options_get_alloc(optlen);
+	struct ip_options_rcu *opt = ip_options_get_alloc(optlen);
 
 	if (!opt)
 		return -ENOMEM;
 	if (optlen)
-		memcpy(opt->__data, data, optlen);
+		memcpy(opt->opt.__data, data, optlen);
 	return ip_options_get_finish(net, optp, opt, optlen);
 }
 
@@ -555,7 +553,7 @@ void ip_forward_options(struct sk_buff *skb)
 
 	if (opt->rr_needaddr) {
 		optptr = (unsigned char *)raw + opt->rr;
-		ip_rt_get_source(&optptr[optptr[2]-5], rt);
+		ip_rt_get_source(&optptr[optptr[2]-5], skb, rt);
 		opt->is_changed = 1;
 	}
 	if (opt->srr_is_hit) {
@@ -569,19 +567,18 @@ void ip_forward_options(struct sk_buff *skb)
 		     ) {
 			if (srrptr + 3 > srrspace)
 				break;
-			if (memcmp(&rt->rt_dst, &optptr[srrptr-1], 4) == 0)
+			if (memcmp(&ip_hdr(skb)->daddr, &optptr[srrptr-1], 4) == 0)
 				break;
 		}
 		if (srrptr + 3 <= srrspace) {
 			opt->is_changed = 1;
-			ip_rt_get_source(&optptr[srrptr-1], rt);
-			ip_hdr(skb)->daddr = rt->rt_dst;
+			ip_rt_get_source(&optptr[srrptr-1], skb, rt);
 			optptr[2] = srrptr+4;
 		} else if (net_ratelimit())
 			printk(KERN_CRIT "ip_forward(): Argh! Destination lost!\n");
 		if (opt->ts_needaddr) {
 			optptr = raw + opt->ts;
-			ip_rt_get_source(&optptr[optptr[2]-9], rt);
+			ip_rt_get_source(&optptr[optptr[2]-9], skb, rt);
 			opt->is_changed = 1;
 		}
 	}
@@ -603,7 +600,7 @@ int ip_options_rcv_srr(struct sk_buff *skb)
 	unsigned long orefdst;
 	int err;
 
-	if (!opt->srr)
+	if (!rt)
 		return 0;
 
 	if (skb->pkt_type != PACKET_HOST)
@@ -637,7 +634,7 @@ int ip_options_rcv_srr(struct sk_buff *skb)
 		if (rt2->rt_type != RTN_LOCAL)
 			break;
 		/* Superfast 8) loopback forward */
-		memcpy(&iph->daddr, &optptr[srrptr-1], 4);
+		iph->daddr = nexthop;
 		opt->is_changed = 1;
 	}
 	if (srrptr <= srrspace) {
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 67f241b9764..98af3697c71 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -140,14 +140,14 @@ static inline int ip_select_ttl(struct inet_sock *inet, struct dst_entry *dst)
  *
  */
 int ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
-			  __be32 saddr, __be32 daddr, struct ip_options *opt)
+			  __be32 saddr, __be32 daddr, struct ip_options_rcu *opt)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct rtable *rt = skb_rtable(skb);
 	struct iphdr *iph;
 
 	/* Build the IP header. */
-	skb_push(skb, sizeof(struct iphdr) + (opt ? opt->optlen : 0));
+	skb_push(skb, sizeof(struct iphdr) + (opt ? opt->opt.optlen : 0));
 	skb_reset_network_header(skb);
 	iph = ip_hdr(skb);
 	iph->version  = 4;
@@ -158,14 +158,14 @@ int ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
 	else
 		iph->frag_off = 0;
 	iph->ttl      = ip_select_ttl(inet, &rt->dst);
-	iph->daddr    = rt->rt_dst;
-	iph->saddr    = rt->rt_src;
+	iph->daddr    = (opt && opt->opt.srr ? opt->opt.faddr : daddr);
+	iph->saddr    = saddr;
 	iph->protocol = sk->sk_protocol;
 	ip_select_ident(iph, &rt->dst, sk);
 
-	if (opt && opt->optlen) {
-		iph->ihl += opt->optlen>>2;
-		ip_options_build(skb, opt, daddr, rt, 0);
+	if (opt && opt->opt.optlen) {
+		iph->ihl += opt->opt.optlen>>2;
+		ip_options_build(skb, &opt->opt, daddr, rt, 0);
 	}
 
 	skb->priority = sk->sk_priority;
@@ -312,11 +312,12 @@ int ip_output(struct sk_buff *skb)
 			    !(IPCB(skb)->flags & IPSKB_REROUTED));
 }
 
-int ip_queue_xmit(struct sk_buff *skb)
+int ip_queue_xmit(struct sk_buff *skb, struct flowi *fl)
 {
 	struct sock *sk = skb->sk;
 	struct inet_sock *inet = inet_sk(sk);
-	struct ip_options *opt = inet->opt;
+	struct ip_options_rcu *inet_opt;
+	struct flowi4 *fl4;
 	struct rtable *rt;
 	struct iphdr *iph;
 	int res;
@@ -325,6 +326,8 @@ int ip_queue_xmit(struct sk_buff *skb)
 	 * f.e. by something like SCTP.
 	 */
 	rcu_read_lock();
+	inet_opt = rcu_dereference(inet->inet_opt);
+	fl4 = &fl->u.ip4;
 	rt = skb_rtable(skb);
 	if (rt != NULL)
 		goto packet_routed;
@@ -336,14 +339,14 @@ int ip_queue_xmit(struct sk_buff *skb)
 
 		/* Use correct destination address if we have options. */
 		daddr = inet->inet_daddr;
-		if(opt && opt->srr)
-			daddr = opt->faddr;
+		if (inet_opt && inet_opt->opt.srr)
+			daddr = inet_opt->opt.faddr;
 
 		/* If this fails, retransmit mechanism of transport layer will
 		 * keep trying until route appears or the connection times
 		 * itself out.
 		 */
-		rt = ip_route_output_ports(sock_net(sk), sk,
+		rt = ip_route_output_ports(sock_net(sk), fl4, sk,
 					   daddr, inet->inet_saddr,
 					   inet->inet_dport,
 					   inet->inet_sport,
@@ -357,11 +360,11 @@ int ip_queue_xmit(struct sk_buff *skb)
 	skb_dst_set_noref(skb, &rt->dst);
 
 packet_routed:
-	if (opt && opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
+	if (inet_opt && inet_opt->opt.is_strictroute && fl4->daddr != rt->rt_gateway)
 		goto no_route;
 
 	/* OK, we know where to send it, allocate and build IP header. */
-	skb_push(skb, sizeof(struct iphdr) + (opt ? opt->optlen : 0));
+	skb_push(skb, sizeof(struct iphdr) + (inet_opt ? inet_opt->opt.optlen : 0));
 	skb_reset_network_header(skb);
 	iph = ip_hdr(skb);
 	*((__be16 *)iph) = htons((4 << 12) | (5 << 8) | (inet->tos & 0xff));
@@ -371,13 +374,13 @@ packet_routed:
 		iph->frag_off = 0;
 	iph->ttl      = ip_select_ttl(inet, &rt->dst);
 	iph->protocol = sk->sk_protocol;
-	iph->saddr    = rt->rt_src;
-	iph->daddr    = rt->rt_dst;
+	iph->saddr    = fl4->saddr;
+	iph->daddr    = fl4->daddr;
 	/* Transport layer set skb->h.foo itself. */
 
-	if (opt && opt->optlen) {
-		iph->ihl += opt->optlen >> 2;
-		ip_options_build(skb, opt, inet->inet_daddr, rt, 0);
+	if (inet_opt && inet_opt->opt.optlen) {
+		iph->ihl += inet_opt->opt.optlen >> 2;
+		ip_options_build(skb, &inet_opt->opt, inet->inet_daddr, rt, 0);
 	}
 
 	ip_select_ident_more(iph, &rt->dst, sk,
@@ -603,7 +606,7 @@ slow_path:
 		/* IF: it doesn't fit, use 'mtu' - the data space left */
 		if (len > mtu)
 			len = mtu;
-		/* IF: we are not sending upto and including the packet end
+		/* IF: we are not sending up to and including the packet end
 		   then align the next start on an eight byte boundary */
 		if (len < left)	{
 			len &= ~7;
@@ -773,7 +776,9 @@ static inline int ip_ufo_append_data(struct sock *sk,
 				       (length - transhdrlen));
 }
 
-static int __ip_append_data(struct sock *sk, struct sk_buff_head *queue,
+static int __ip_append_data(struct sock *sk,
+			    struct flowi4 *fl4,
+			    struct sk_buff_head *queue,
 			    struct inet_cork *cork,
 			    int getfrag(void *from, char *to, int offset,
 					int len, int odd, struct sk_buff *skb),
@@ -805,7 +810,7 @@ static int __ip_append_data(struct sock *sk, struct sk_buff_head *queue,
 	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
 
 	if (cork->length + length > 0xFFFF - fragheaderlen) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport,
+		ip_local_error(sk, EMSGSIZE, fl4->daddr, inet->inet_dport,
 			       mtu-exthdrlen);
 		return -EMSGSIZE;
 	}
@@ -1033,7 +1038,7 @@ static int ip_setup_cork(struct sock *sk, struct inet_cork *cork,
 			 struct ipcm_cookie *ipc, struct rtable **rtp)
 {
 	struct inet_sock *inet = inet_sk(sk);
-	struct ip_options *opt;
+	struct ip_options_rcu *opt;
 	struct rtable *rt;
 
 	/*
@@ -1047,7 +1052,7 @@ static int ip_setup_cork(struct sock *sk, struct inet_cork *cork,
 			if (unlikely(cork->opt == NULL))
 				return -ENOBUFS;
 		}
-		memcpy(cork->opt, opt, sizeof(struct ip_options) + opt->optlen);
+		memcpy(cork->opt, &opt->opt, sizeof(struct ip_options) + opt->opt.optlen);
 		cork->flags |= IPCORK_OPT;
 		cork->addr = ipc->addr;
 	}
@@ -1080,7 +1085,7 @@ static int ip_setup_cork(struct sock *sk, struct inet_cork *cork,
  *
  *	LATER: length must be adjusted by pad at tail, when it is required.
  */
-int ip_append_data(struct sock *sk,
+int ip_append_data(struct sock *sk, struct flowi4 *fl4,
 		   int getfrag(void *from, char *to, int offset, int len,
 			       int odd, struct sk_buff *skb),
 		   void *from, int length, int transhdrlen,
@@ -1094,24 +1099,25 @@ int ip_append_data(struct sock *sk,
 		return 0;
 
 	if (skb_queue_empty(&sk->sk_write_queue)) {
-		err = ip_setup_cork(sk, &inet->cork, ipc, rtp);
+		err = ip_setup_cork(sk, &inet->cork.base, ipc, rtp);
 		if (err)
 			return err;
 	} else {
 		transhdrlen = 0;
 	}
 
-	return __ip_append_data(sk, &sk->sk_write_queue, &inet->cork, getfrag,
+	return __ip_append_data(sk, fl4, &sk->sk_write_queue, &inet->cork.base, getfrag,
 				from, length, transhdrlen, flags);
 }
 
-ssize_t	ip_append_page(struct sock *sk, struct page *page,
+ssize_t	ip_append_page(struct sock *sk, struct flowi4 *fl4, struct page *page,
 		       int offset, size_t size, int flags)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct sk_buff *skb;
 	struct rtable *rt;
 	struct ip_options *opt = NULL;
+	struct inet_cork *cork;
 	int hh_len;
 	int mtu;
 	int len;
@@ -1127,28 +1133,29 @@ ssize_t	ip_append_page(struct sock *sk, struct page *page,
 	if (skb_queue_empty(&sk->sk_write_queue))
 		return -EINVAL;
 
-	rt = (struct rtable *)inet->cork.dst;
-	if (inet->cork.flags & IPCORK_OPT)
-		opt = inet->cork.opt;
+	cork = &inet->cork.base;
+	rt = (struct rtable *)cork->dst;
+	if (cork->flags & IPCORK_OPT)
+		opt = cork->opt;
 
 	if (!(rt->dst.dev->features&NETIF_F_SG))
 		return -EOPNOTSUPP;
 
 	hh_len = LL_RESERVED_SPACE(rt->dst.dev);
-	mtu = inet->cork.fragsize;
+	mtu = cork->fragsize;
 
 	fragheaderlen = sizeof(struct iphdr) + (opt ? opt->optlen : 0);
 	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
 
-	if (inet->cork.length + size > 0xFFFF - fragheaderlen) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport, mtu);
+	if (cork->length + size > 0xFFFF - fragheaderlen) {
+		ip_local_error(sk, EMSGSIZE, fl4->daddr, inet->inet_dport, mtu);
 		return -EMSGSIZE;
 	}
 
 	if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
 		return -EINVAL;
 
-	inet->cork.length += size;
+	cork->length += size;
 	if ((size + skb->len > mtu) &&
 	    (sk->sk_protocol == IPPROTO_UDP) &&
 	    (rt->dst.dev->features & NETIF_F_UFO)) {
@@ -1243,7 +1250,7 @@ ssize_t	ip_append_page(struct sock *sk, struct page *page,
 	return 0;
 
 error:
-	inet->cork.length -= size;
+	cork->length -= size;
 	IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTDISCARDS);
 	return err;
 }
@@ -1262,6 +1269,7 @@ static void ip_cork_release(struct inet_cork *cork)
  *	and push them out.
  */
 struct sk_buff *__ip_make_skb(struct sock *sk,
+			      struct flowi4 *fl4,
 			      struct sk_buff_head *queue,
 			      struct inet_cork *cork)
 {
@@ -1319,17 +1327,18 @@ struct sk_buff *__ip_make_skb(struct sock *sk,
 	iph = (struct iphdr *)skb->data;
 	iph->version = 4;
 	iph->ihl = 5;
-	if (opt) {
-		iph->ihl += opt->optlen>>2;
-		ip_options_build(skb, opt, cork->addr, rt, 0);
-	}
 	iph->tos = inet->tos;
 	iph->frag_off = df;
 	ip_select_ident(iph, &rt->dst, sk);
 	iph->ttl = ttl;
 	iph->protocol = sk->sk_protocol;
-	iph->saddr = rt->rt_src;
-	iph->daddr = rt->rt_dst;
+	iph->saddr = fl4->saddr;
+	iph->daddr = fl4->daddr;
+
+	if (opt) {
+		iph->ihl += opt->optlen>>2;
+		ip_options_build(skb, opt, cork->addr, rt, 0);
+	}
 
 	skb->priority = sk->sk_priority;
 	skb->mark = sk->sk_mark;
@@ -1365,11 +1374,11 @@ int ip_send_skb(struct sk_buff *skb)
 	return err;
 }
 
-int ip_push_pending_frames(struct sock *sk)
+int ip_push_pending_frames(struct sock *sk, struct flowi4 *fl4)
 {
 	struct sk_buff *skb;
 
-	skb = ip_finish_skb(sk);
+	skb = ip_finish_skb(sk, fl4);
 	if (!skb)
 		return 0;
 
@@ -1394,17 +1403,18 @@ static void __ip_flush_pending_frames(struct sock *sk,
 
 void ip_flush_pending_frames(struct sock *sk)
 {
-	__ip_flush_pending_frames(sk, &sk->sk_write_queue, &inet_sk(sk)->cork);
+	__ip_flush_pending_frames(sk, &sk->sk_write_queue, &inet_sk(sk)->cork.base);
 }
 
 struct sk_buff *ip_make_skb(struct sock *sk,
+			    struct flowi4 *fl4,
 			    int getfrag(void *from, char *to, int offset,
 					int len, int odd, struct sk_buff *skb),
 			    void *from, int length, int transhdrlen,
 			    struct ipcm_cookie *ipc, struct rtable **rtp,
 			    unsigned int flags)
 {
-	struct inet_cork cork = {};
+	struct inet_cork cork;
 	struct sk_buff_head queue;
 	int err;
 
@@ -1413,18 +1423,21 @@ struct sk_buff *ip_make_skb(struct sock *sk,
 
 	__skb_queue_head_init(&queue);
 
+	cork.flags = 0;
+	cork.addr = 0;
+	cork.opt = NULL;
 	err = ip_setup_cork(sk, &cork, ipc, rtp);
 	if (err)
 		return ERR_PTR(err);
 
-	err = __ip_append_data(sk, &queue, &cork, getfrag,
+	err = __ip_append_data(sk, fl4, &queue, &cork, getfrag,
 			       from, length, transhdrlen, flags);
 	if (err) {
 		__ip_flush_pending_frames(sk, &queue, &cork);
 		return ERR_PTR(err);
 	}
 
-	return __ip_make_skb(sk, &queue, &cork);
+	return __ip_make_skb(sk, fl4, &queue, &cork);
 }
 
 /*
@@ -1447,48 +1460,39 @@ static int ip_reply_glue_bits(void *dptr, char *to, int offset,
  *	Should run single threaded per socket because it uses the sock
  *     	structure to pass arguments.
  */
-void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *arg,
-		   unsigned int len)
+void ip_send_reply(struct sock *sk, struct sk_buff *skb, __be32 daddr,
+		   struct ip_reply_arg *arg, unsigned int len)
 {
 	struct inet_sock *inet = inet_sk(sk);
-	struct {
-		struct ip_options	opt;
-		char			data[40];
-	} replyopts;
+	struct ip_options_data replyopts;
 	struct ipcm_cookie ipc;
-	__be32 daddr;
+	struct flowi4 fl4;
 	struct rtable *rt = skb_rtable(skb);
 
-	if (ip_options_echo(&replyopts.opt, skb))
+	if (ip_options_echo(&replyopts.opt.opt, skb))
 		return;
 
-	daddr = ipc.addr = rt->rt_src;
+	ipc.addr = daddr;
 	ipc.opt = NULL;
 	ipc.tx_flags = 0;
 
-	if (replyopts.opt.optlen) {
+	if (replyopts.opt.opt.optlen) {
 		ipc.opt = &replyopts.opt;
 
-		if (ipc.opt->srr)
-			daddr = replyopts.opt.faddr;
+		if (replyopts.opt.opt.srr)
+			daddr = replyopts.opt.opt.faddr;
 	}
 
-	{
-		struct flowi4 fl4 = {
-			.flowi4_oif = arg->bound_dev_if,
-			.daddr = daddr,
-			.saddr = rt->rt_spec_dst,
-			.flowi4_tos = RT_TOS(ip_hdr(skb)->tos),
-			.fl4_sport = tcp_hdr(skb)->dest,
-			.fl4_dport = tcp_hdr(skb)->source,
-			.flowi4_proto = sk->sk_protocol,
-			.flowi4_flags = ip_reply_arg_flowi_flags(arg),
-		};
-		security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
-		rt = ip_route_output_key(sock_net(sk), &fl4);
-		if (IS_ERR(rt))
-			return;
-	}
+	flowi4_init_output(&fl4, arg->bound_dev_if, 0,
+			   RT_TOS(ip_hdr(skb)->tos),
+			   RT_SCOPE_UNIVERSE, sk->sk_protocol,
+			   ip_reply_arg_flowi_flags(arg),
+			   daddr, rt->rt_spec_dst,
+			   tcp_hdr(skb)->source, tcp_hdr(skb)->dest);
+	security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
+	rt = ip_route_output_key(sock_net(sk), &fl4);
+	if (IS_ERR(rt))
+		return;
 
 	/* And let IP do all the hard work.
 
@@ -1501,7 +1505,7 @@ void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *ar
 	sk->sk_priority = skb->priority;
 	sk->sk_protocol = ip_hdr(skb)->protocol;
 	sk->sk_bound_dev_if = arg->bound_dev_if;
-	ip_append_data(sk, ip_reply_glue_bits, arg->iov->iov_base, len, 0,
+	ip_append_data(sk, &fl4, ip_reply_glue_bits, arg->iov->iov_base, len, 0,
 		       &ipc, &rt, MSG_DONTWAIT);
 	if ((skb = skb_peek(&sk->sk_write_queue)) != NULL) {
 		if (arg->csumoffset >= 0)
@@ -1509,7 +1513,7 @@ void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *ar
 			  arg->csumoffset) = csum_fold(csum_add(skb->csum,
 								arg->csum));
 		skb->ip_summed = CHECKSUM_NONE;
-		ip_push_pending_frames(sk);
+		ip_push_pending_frames(sk, &fl4);
 	}
 
 	bh_unlock_sock(sk);
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 3948c86e59c..ab0c9efd1ef 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -131,7 +131,7 @@ static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb)
 static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb)
 {
 	struct sockaddr_in sin;
-	struct iphdr *iph = ip_hdr(skb);
+	const struct iphdr *iph = ip_hdr(skb);
 	__be16 *ports = (__be16 *)skb_transport_header(skb);
 
 	if (skb_transport_offset(skb) + 4 > skb->len)
@@ -451,6 +451,11 @@ out:
 }
 
 
+static void opt_kfree_rcu(struct rcu_head *head)
+{
+	kfree(container_of(head, struct ip_options_rcu, rcu));
+}
+
 /*
  *	Socket option code for IP. This is the end of the line after any
  *	TCP,UDP etc options on an IP socket.
@@ -497,13 +502,16 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	switch (optname) {
 	case IP_OPTIONS:
 	{
-		struct ip_options *opt = NULL;
+		struct ip_options_rcu *old, *opt = NULL;
+
 		if (optlen > 40)
 			goto e_inval;
 		err = ip_options_get_from_user(sock_net(sk), &opt,
 					       optval, optlen);
 		if (err)
 			break;
+		old = rcu_dereference_protected(inet->inet_opt,
+						sock_owned_by_user(sk));
 		if (inet->is_icsk) {
 			struct inet_connection_sock *icsk = inet_csk(sk);
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -512,17 +520,18 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 			       (TCPF_LISTEN | TCPF_CLOSE)) &&
 			     inet->inet_daddr != LOOPBACK4_IPV6)) {
 #endif
-				if (inet->opt)
-					icsk->icsk_ext_hdr_len -= inet->opt->optlen;
+				if (old)
+					icsk->icsk_ext_hdr_len -= old->opt.optlen;
 				if (opt)
-					icsk->icsk_ext_hdr_len += opt->optlen;
+					icsk->icsk_ext_hdr_len += opt->opt.optlen;
 				icsk->icsk_sync_mss(sk, icsk->icsk_pmtu_cookie);
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 			}
 #endif
 		}
-		opt = xchg(&inet->opt, opt);
-		kfree(opt);
+		rcu_assign_pointer(inet->inet_opt, opt);
+		if (old)
+			call_rcu(&old->rcu, opt_kfree_rcu);
 		break;
 	}
 	case IP_PKTINFO:
@@ -1081,12 +1090,16 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 	case IP_OPTIONS:
 	{
 		unsigned char optbuf[sizeof(struct ip_options)+40];
-		struct ip_options * opt = (struct ip_options *)optbuf;
+		struct ip_options *opt = (struct ip_options *)optbuf;
+		struct ip_options_rcu *inet_opt;
+
+		inet_opt = rcu_dereference_protected(inet->inet_opt,
+						     sock_owned_by_user(sk));
 		opt->optlen = 0;
-		if (inet->opt)
-			memcpy(optbuf, inet->opt,
-			       sizeof(struct ip_options)+
-			       inet->opt->optlen);
+		if (inet_opt)
+			memcpy(optbuf, &inet_opt->opt,
+			       sizeof(struct ip_options) +
+			       inet_opt->opt.optlen);
 		release_sock(sk);
 
 		if (opt->optlen == 0)
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index 629067571f0..c857f6f49b0 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -27,7 +27,7 @@ static void ipcomp4_err(struct sk_buff *skb, u32 info)
 {
 	struct net *net = dev_net(skb->dev);
 	__be32 spi;
-	struct iphdr *iph = (struct iphdr *)skb->data;
+	const struct iphdr *iph = (const struct iphdr *)skb->data;
 	struct ip_comp_hdr *ipch = (struct ip_comp_hdr *)(skb->data+(iph->ihl<<2));
 	struct xfrm_state *x;
 
@@ -36,7 +36,7 @@ static void ipcomp4_err(struct sk_buff *skb, u32 info)
 		return;
 
 	spi = htonl(ntohs(ipch->cpi));
-	x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr,
+	x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
 			      spi, IPPROTO_COMP, AF_INET);
 	if (!x)
 		return;
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 2b097752426..ab7e5542c1c 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -87,8 +87,8 @@
 #endif
 
 /* Define the friendly delay before and after opening net devices */
-#define CONF_PRE_OPEN		500	/* Before opening: 1/2 second */
-#define CONF_POST_OPEN		1	/* After opening: 1 second */
+#define CONF_POST_OPEN		10	/* After opening: 10 msecs */
+#define CONF_CARRIER_TIMEOUT	120000	/* Wait for carrier timeout */
 
 /* Define the timeout for waiting for a DHCP/BOOTP/RARP reply */
 #define CONF_OPEN_RETRIES 	2	/* (Re)open devices twice */
@@ -188,14 +188,14 @@ struct ic_device {
 static struct ic_device *ic_first_dev __initdata = NULL;/* List of open device */
 static struct net_device *ic_dev __initdata = NULL;	/* Selected device */
 
-static bool __init ic_device_match(struct net_device *dev)
+static bool __init ic_is_init_dev(struct net_device *dev)
 {
-	if (user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
+	if (dev->flags & IFF_LOOPBACK)
+		return false;
+	return user_dev_name[0] ? !strcmp(dev->name, user_dev_name) :
 	    (!(dev->flags & IFF_LOOPBACK) &&
 	     (dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) &&
-	     strncmp(dev->name, "dummy", 5)))
-		return true;
-	return false;
+	     strncmp(dev->name, "dummy", 5));
 }
 
 static int __init ic_open_devs(void)
@@ -203,6 +203,7 @@ static int __init ic_open_devs(void)
 	struct ic_device *d, **last;
 	struct net_device *dev;
 	unsigned short oflags;
+	unsigned long start;
 
 	last = &ic_first_dev;
 	rtnl_lock();
@@ -216,9 +217,7 @@ static int __init ic_open_devs(void)
 	}
 
 	for_each_netdev(&init_net, dev) {
-		if (dev->flags & IFF_LOOPBACK)
-			continue;
-		if (ic_device_match(dev)) {
+		if (ic_is_init_dev(dev)) {
 			int able = 0;
 			if (dev->mtu >= 364)
 				able |= IC_BOOTP;
@@ -252,6 +251,17 @@ static int __init ic_open_devs(void)
 				dev->name, able, d->xid));
 		}
 	}
+
+	/* wait for a carrier on at least one device */
+	start = jiffies;
+	while (jiffies - start < msecs_to_jiffies(CONF_CARRIER_TIMEOUT)) {
+		for_each_netdev(&init_net, dev)
+			if (ic_is_init_dev(dev) && netif_carrier_ok(dev))
+				goto have_carrier;
+
+		msleep(1);
+	}
+have_carrier:
 	rtnl_unlock();
 
 	*last = NULL;
@@ -1324,14 +1334,13 @@ static int __init wait_for_devices(void)
 {
 	int i;
 
-	msleep(CONF_PRE_OPEN);
 	for (i = 0; i < DEVICE_WAIT_MAX; i++) {
 		struct net_device *dev;
 		int found = 0;
 
 		rtnl_lock();
 		for_each_netdev(&init_net, dev) {
-			if (ic_device_match(dev)) {
+			if (ic_is_init_dev(dev)) {
 				found = 1;
 				break;
 			}
@@ -1378,7 +1387,7 @@ static int __init ip_auto_config(void)
 		return err;
 
 	/* Give drivers a chance to settle */
-	ssleep(CONF_POST_OPEN);
+	msleep(CONF_POST_OPEN);
 
 	/*
 	 * If the config information is insufficient (e.g., our IP address or
@@ -1444,7 +1453,7 @@ static int __init ip_auto_config(void)
 		root_server_addr = addr;
 
 	/*
-	 * Use defaults whereever applicable.
+	 * Use defaults wherever applicable.
 	 */
 	if (ic_defaults() < 0)
 		return -1;
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index bfc17c5914e..378b20b7ca6 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -276,11 +276,6 @@ static struct ip_tunnel * ipip_tunnel_locate(struct net *net,
 
 	dev_net_set(dev, net);
 
-	if (strchr(name, '%')) {
-		if (dev_alloc_name(dev, name) < 0)
-			goto failed_free;
-	}
-
 	nt = netdev_priv(dev);
 	nt->parms = *parms;
 
@@ -319,7 +314,7 @@ static int ipip_err(struct sk_buff *skb, u32 info)
    8 bytes of packet payload. It means, that precise relaying of
    ICMP in the real Internet is absolutely infeasible.
  */
-	struct iphdr *iph = (struct iphdr *)skb->data;
+	const struct iphdr *iph = (const struct iphdr *)skb->data;
 	const int type = icmp_hdr(skb)->type;
 	const int code = icmp_hdr(skb)->code;
 	struct ip_tunnel *t;
@@ -433,15 +428,16 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
 	struct pcpu_tstats *tstats;
-	struct iphdr  *tiph = &tunnel->parms.iph;
+	const struct iphdr  *tiph = &tunnel->parms.iph;
 	u8     tos = tunnel->parms.iph.tos;
 	__be16 df = tiph->frag_off;
 	struct rtable *rt;     			/* Route to the other host */
 	struct net_device *tdev;		/* Device to other host */
-	struct iphdr  *old_iph = ip_hdr(skb);
+	const struct iphdr  *old_iph = ip_hdr(skb);
 	struct iphdr  *iph;			/* Our new IP header */
 	unsigned int max_headroom;		/* The extra header space needed */
 	__be32 dst = tiph->daddr;
+	struct flowi4 fl4;
 	int    mtu;
 
 	if (skb->protocol != htons(ETH_P_IP))
@@ -460,7 +456,7 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 			goto tx_error_icmp;
 	}
 
-	rt = ip_route_output_ports(dev_net(dev), NULL,
+	rt = ip_route_output_ports(dev_net(dev), &fl4, NULL,
 				   dst, tiph->saddr,
 				   0, 0,
 				   IPPROTO_IPIP, RT_TOS(tos),
@@ -549,8 +545,8 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	iph->frag_off		=	df;
 	iph->protocol		=	IPPROTO_IPIP;
 	iph->tos		=	INET_ECN_encapsulate(tos, old_iph->tos);
-	iph->daddr		=	rt->rt_dst;
-	iph->saddr		=	rt->rt_src;
+	iph->daddr		=	fl4.daddr;
+	iph->saddr		=	fl4.saddr;
 
 	if ((iph->ttl = tiph->ttl) == 0)
 		iph->ttl	=	old_iph->ttl;
@@ -572,19 +568,21 @@ static void ipip_tunnel_bind_dev(struct net_device *dev)
 {
 	struct net_device *tdev = NULL;
 	struct ip_tunnel *tunnel;
-	struct iphdr *iph;
+	const struct iphdr *iph;
 
 	tunnel = netdev_priv(dev);
 	iph = &tunnel->parms.iph;
 
 	if (iph->daddr) {
-		struct rtable *rt = ip_route_output_ports(dev_net(dev), NULL,
-							  iph->daddr, iph->saddr,
-							  0, 0,
-							  IPPROTO_IPIP,
-							  RT_TOS(iph->tos),
-							  tunnel->parms.link);
-
+		struct rtable *rt;
+		struct flowi4 fl4;
+
+		rt = ip_route_output_ports(dev_net(dev), &fl4, NULL,
+					   iph->daddr, iph->saddr,
+					   0, 0,
+					   IPPROTO_IPIP,
+					   RT_TOS(iph->tos),
+					   tunnel->parms.link);
 		if (!IS_ERR(rt)) {
 			tdev = rt->dst.dev;
 			ip_rt_put(rt);
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 1f62eaeb6de..30a7763c400 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1549,7 +1549,7 @@ static struct notifier_block ip_mr_notifier = {
 static void ip_encap(struct sk_buff *skb, __be32 saddr, __be32 daddr)
 {
 	struct iphdr *iph;
-	struct iphdr *old_iph = ip_hdr(skb);
+	const struct iphdr *old_iph = ip_hdr(skb);
 
 	skb_push(skb, sizeof(struct iphdr));
 	skb->transport_header = skb->network_header;
@@ -1595,6 +1595,7 @@ static void ipmr_queue_xmit(struct net *net, struct mr_table *mrt,
 	struct vif_device *vif = &mrt->vif_table[vifi];
 	struct net_device *dev;
 	struct rtable *rt;
+	struct flowi4 fl4;
 	int    encap = 0;
 
 	if (vif->dev == NULL)
@@ -1612,7 +1613,7 @@ static void ipmr_queue_xmit(struct net *net, struct mr_table *mrt,
 #endif
 
 	if (vif->flags & VIFF_TUNNEL) {
-		rt = ip_route_output_ports(net, NULL,
+		rt = ip_route_output_ports(net, &fl4, NULL,
 					   vif->remote, vif->local,
 					   0, 0,
 					   IPPROTO_IPIP,
@@ -1621,7 +1622,7 @@ static void ipmr_queue_xmit(struct net *net, struct mr_table *mrt,
 			goto out_free;
 		encap = sizeof(struct iphdr);
 	} else {
-		rt = ip_route_output_ports(net, NULL, iph->daddr, 0,
+		rt = ip_route_output_ports(net, &fl4, NULL, iph->daddr, 0,
 					   0, 0,
 					   IPPROTO_IPIP,
 					   RT_TOS(iph->tos), vif->link);
@@ -1788,12 +1789,14 @@ dont_forward:
 	return 0;
 }
 
-static struct mr_table *ipmr_rt_fib_lookup(struct net *net, struct rtable *rt)
+static struct mr_table *ipmr_rt_fib_lookup(struct net *net, struct sk_buff *skb)
 {
+	struct rtable *rt = skb_rtable(skb);
+	struct iphdr *iph = ip_hdr(skb);
 	struct flowi4 fl4 = {
-		.daddr = rt->rt_key_dst,
-		.saddr = rt->rt_key_src,
-		.flowi4_tos = rt->rt_tos,
+		.daddr = iph->daddr,
+		.saddr = iph->saddr,
+		.flowi4_tos = iph->tos,
 		.flowi4_oif = rt->rt_oif,
 		.flowi4_iif = rt->rt_iif,
 		.flowi4_mark = rt->rt_mark,
@@ -1825,7 +1828,7 @@ int ip_mr_input(struct sk_buff *skb)
 	if (IPCB(skb)->flags & IPSKB_FORWARDED)
 		goto dont_forward;
 
-	mrt = ipmr_rt_fib_lookup(net, skb_rtable(skb));
+	mrt = ipmr_rt_fib_lookup(net, skb);
 	if (IS_ERR(mrt)) {
 		kfree_skb(skb);
 		return PTR_ERR(mrt);
@@ -1957,7 +1960,7 @@ int pim_rcv_v1(struct sk_buff *skb)
 
 	pim = igmp_hdr(skb);
 
-	mrt = ipmr_rt_fib_lookup(net, skb_rtable(skb));
+	mrt = ipmr_rt_fib_lookup(net, skb);
 	if (IS_ERR(mrt))
 		goto drop;
 	if (!mrt->mroute_do_pim ||
@@ -1989,7 +1992,7 @@ static int pim_rcv(struct sk_buff *skb)
 	     csum_fold(skb_checksum(skb, 0, skb->len, 0))))
 		goto drop;
 
-	mrt = ipmr_rt_fib_lookup(net, skb_rtable(skb));
+	mrt = ipmr_rt_fib_lookup(net, skb);
 	if (IS_ERR(mrt))
 		goto drop;
 	if (__pim_rcv(mrt, skb, sizeof(*pim))) {
@@ -2038,20 +2041,20 @@ rtattr_failure:
 	return -EMSGSIZE;
 }
 
-int ipmr_get_route(struct net *net,
-		   struct sk_buff *skb, struct rtmsg *rtm, int nowait)
+int ipmr_get_route(struct net *net, struct sk_buff *skb,
+		   __be32 saddr, __be32 daddr,
+		   struct rtmsg *rtm, int nowait)
 {
-	int err;
-	struct mr_table *mrt;
 	struct mfc_cache *cache;
-	struct rtable *rt = skb_rtable(skb);
+	struct mr_table *mrt;
+	int err;
 
 	mrt = ipmr_get_table(net, RT_TABLE_DEFAULT);
 	if (mrt == NULL)
 		return -ENOENT;
 
 	rcu_read_lock();
-	cache = ipmr_cache_find(mrt, rt->rt_src, rt->rt_dst);
+	cache = ipmr_cache_find(mrt, saddr, daddr);
 
 	if (cache == NULL) {
 		struct sk_buff *skb2;
@@ -2084,8 +2087,8 @@ int ipmr_get_route(struct net *net,
 		skb_reset_network_header(skb2);
 		iph = ip_hdr(skb2);
 		iph->ihl = sizeof(struct iphdr) >> 2;
-		iph->saddr = rt->rt_src;
-		iph->daddr = rt->rt_dst;
+		iph->saddr = saddr;
+		iph->daddr = daddr;
 		iph->version = 0;
 		err = ipmr_cache_unresolved(mrt, vif, skb2);
 		read_unlock(&mrt_lock);
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index f3c0b549b8e..4614babdc45 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -221,9 +221,10 @@ static __sum16 nf_ip_checksum_partial(struct sk_buff *skb, unsigned int hook,
 	return csum;
 }
 
-static int nf_ip_route(struct dst_entry **dst, struct flowi *fl)
+static int nf_ip_route(struct net *net, struct dst_entry **dst,
+		       struct flowi *fl, bool strict __always_unused)
 {
-	struct rtable *rt = ip_route_output_key(&init_net, &fl->u.ip4);
+	struct rtable *rt = ip_route_output_key(net, &fl->u.ip4);
 	if (IS_ERR(rt))
 		return PTR_ERR(rt);
 	*dst = &rt->dst;
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 4b5d457c2d7..fd7a3f68917 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -76,7 +76,7 @@ static inline int arp_devaddr_compare(const struct arpt_devaddr_info *ap,
 }
 
 /*
- * Unfortunatly, _b and _mask are not aligned to an int (or long int)
+ * Unfortunately, _b and _mask are not aligned to an int (or long int)
  * Some arches dont care, unrolling the loop is a win on them.
  * For other arches, we only have a 16bit alignement.
  */
@@ -260,6 +260,7 @@ unsigned int arpt_do_table(struct sk_buff *skb,
 	void *table_base;
 	const struct xt_table_info *private;
 	struct xt_action_param acpar;
+	unsigned int addend;
 
 	if (!pskb_may_pull(skb, arp_hdr_len(skb->dev)))
 		return NF_DROP;
@@ -267,7 +268,8 @@ unsigned int arpt_do_table(struct sk_buff *skb,
 	indev = in ? in->name : nulldevname;
 	outdev = out ? out->name : nulldevname;
 
-	xt_info_rdlock_bh();
+	local_bh_disable();
+	addend = xt_write_recseq_begin();
 	private = table->private;
 	table_base = private->entries[smp_processor_id()];
 
@@ -338,7 +340,8 @@ unsigned int arpt_do_table(struct sk_buff *skb,
 			/* Verdict */
 			break;
 	} while (!acpar.hotdrop);
-	xt_info_rdunlock_bh();
+	xt_write_recseq_end(addend);
+	local_bh_enable();
 
 	if (acpar.hotdrop)
 		return NF_DROP;
@@ -712,7 +715,7 @@ static void get_counters(const struct xt_table_info *t,
 	unsigned int i;
 
 	for_each_possible_cpu(cpu) {
-		seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+		seqcount_t *s = &per_cpu(xt_recseq, cpu);
 
 		i = 0;
 		xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -720,10 +723,10 @@ static void get_counters(const struct xt_table_info *t,
 			unsigned int start;
 
 			do {
-				start = read_seqbegin(lock);
+				start = read_seqcount_begin(s);
 				bcnt = iter->counters.bcnt;
 				pcnt = iter->counters.pcnt;
-			} while (read_seqretry(lock, start));
+			} while (read_seqcount_retry(s, start));
 
 			ADD_COUNTER(counters[i], bcnt, pcnt);
 			++i;
@@ -1115,6 +1118,7 @@ static int do_add_counters(struct net *net, const void __user *user,
 	int ret = 0;
 	void *loc_cpu_entry;
 	struct arpt_entry *iter;
+	unsigned int addend;
 #ifdef CONFIG_COMPAT
 	struct compat_xt_counters_info compat_tmp;
 
@@ -1171,12 +1175,12 @@ static int do_add_counters(struct net *net, const void __user *user,
 	/* Choose the copy that is on our node */
 	curcpu = smp_processor_id();
 	loc_cpu_entry = private->entries[curcpu];
-	xt_info_wrlock(curcpu);
+	addend = xt_write_recseq_begin();
 	xt_entry_foreach(iter, loc_cpu_entry, private->size) {
 		ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
 		++i;
 	}
-	xt_info_wrunlock(curcpu);
+	xt_write_recseq_end(addend);
  unlock_up_free:
 	local_bh_enable();
 	xt_table_unlock(t);
@@ -1874,7 +1878,7 @@ static int __init arp_tables_init(void)
 	if (ret < 0)
 		goto err1;
 
-	/* Noone else will be downing sem now, so we won't sleep */
+	/* No one else will be downing sem now, so we won't sleep */
 	ret = xt_register_targets(arpt_builtin_tg, ARRAY_SIZE(arpt_builtin_tg));
 	if (ret < 0)
 		goto err2;
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index ffcea0d1678..76474384350 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -68,15 +68,6 @@ void *ipt_alloc_initial_table(const struct xt_table *info)
 }
 EXPORT_SYMBOL_GPL(ipt_alloc_initial_table);
 
-/*
-   We keep a set of rules for each CPU, so we can avoid write-locking
-   them in the softirq when updating the counters and therefore
-   only need to read-lock in the softirq; doing a write_lock_bh() in user
-   context stops packets coming through and allows user context to read
-   the counters or update the rules.
-
-   Hence the start of any table is given by get_table() below.  */
-
 /* Returns whether matches rule or not. */
 /* Performance critical - called for every packet */
 static inline bool
@@ -311,6 +302,7 @@ ipt_do_table(struct sk_buff *skb,
 	unsigned int *stackptr, origptr, cpu;
 	const struct xt_table_info *private;
 	struct xt_action_param acpar;
+	unsigned int addend;
 
 	/* Initialization */
 	ip = ip_hdr(skb);
@@ -331,7 +323,8 @@ ipt_do_table(struct sk_buff *skb,
 	acpar.hooknum = hook;
 
 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-	xt_info_rdlock_bh();
+	local_bh_disable();
+	addend = xt_write_recseq_begin();
 	private = table->private;
 	cpu        = smp_processor_id();
 	table_base = private->entries[cpu];
@@ -430,7 +423,9 @@ ipt_do_table(struct sk_buff *skb,
 	pr_debug("Exiting %s; resetting sp from %u to %u\n",
 		 __func__, *stackptr, origptr);
 	*stackptr = origptr;
-	xt_info_rdunlock_bh();
+ 	xt_write_recseq_end(addend);
+ 	local_bh_enable();
+
 #ifdef DEBUG_ALLOW_ALL
 	return NF_ACCEPT;
 #else
@@ -886,7 +881,7 @@ get_counters(const struct xt_table_info *t,
 	unsigned int i;
 
 	for_each_possible_cpu(cpu) {
-		seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+		seqcount_t *s = &per_cpu(xt_recseq, cpu);
 
 		i = 0;
 		xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -894,10 +889,10 @@ get_counters(const struct xt_table_info *t,
 			unsigned int start;
 
 			do {
-				start = read_seqbegin(lock);
+				start = read_seqcount_begin(s);
 				bcnt = iter->counters.bcnt;
 				pcnt = iter->counters.pcnt;
-			} while (read_seqretry(lock, start));
+			} while (read_seqcount_retry(s, start));
 
 			ADD_COUNTER(counters[i], bcnt, pcnt);
 			++i; /* macro does multi eval of i */
@@ -1312,6 +1307,7 @@ do_add_counters(struct net *net, const void __user *user,
 	int ret = 0;
 	void *loc_cpu_entry;
 	struct ipt_entry *iter;
+	unsigned int addend;
 #ifdef CONFIG_COMPAT
 	struct compat_xt_counters_info compat_tmp;
 
@@ -1368,12 +1364,12 @@ do_add_counters(struct net *net, const void __user *user,
 	/* Choose the copy that is on our node */
 	curcpu = smp_processor_id();
 	loc_cpu_entry = private->entries[curcpu];
-	xt_info_wrlock(curcpu);
+	addend = xt_write_recseq_begin();
 	xt_entry_foreach(iter, loc_cpu_entry, private->size) {
 		ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
 		++i;
 	}
-	xt_info_wrunlock(curcpu);
+	xt_write_recseq_end(addend);
  unlock_up_free:
 	local_bh_enable();
 	xt_table_unlock(t);
@@ -2233,7 +2229,7 @@ static int __init ip_tables_init(void)
 	if (ret < 0)
 		goto err1;
 
-	/* Noone else will be downing sem now, so we won't sleep */
+	/* No one else will be downing sem now, so we won't sleep */
 	ret = xt_register_targets(ipt_builtin_tg, ARRAY_SIZE(ipt_builtin_tg));
 	if (ret < 0)
 		goto err2;
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 21bcf471b25..9c71b2755ce 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -521,7 +521,7 @@ int nf_nat_protocol_register(const struct nf_nat_protocol *proto)
 }
 EXPORT_SYMBOL(nf_nat_protocol_register);
 
-/* Noone stores the protocol anywhere; simply delete it. */
+/* No one stores the protocol anywhere; simply delete it. */
 void nf_nat_protocol_unregister(const struct nf_nat_protocol *proto)
 {
 	spin_lock_bh(&nf_nat_lock);
@@ -532,7 +532,7 @@ void nf_nat_protocol_unregister(const struct nf_nat_protocol *proto)
 }
 EXPORT_SYMBOL(nf_nat_protocol_unregister);
 
-/* Noone using conntrack by the time this called. */
+/* No one using conntrack by the time this called. */
 static void nf_nat_cleanup_conntrack(struct nf_conn *ct)
 {
 	struct nf_conn_nat *nat = nf_ct_ext_find(ct, NF_CT_EXT_NAT);
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index 31427fb57aa..99cfa28b6d3 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -153,7 +153,7 @@ void nf_nat_set_seq_adjust(struct nf_conn *ct, enum ip_conntrack_info ctinfo,
 }
 EXPORT_SYMBOL_GPL(nf_nat_set_seq_adjust);
 
-static void nf_nat_csum(struct sk_buff *skb, struct iphdr *iph, void *data,
+static void nf_nat_csum(struct sk_buff *skb, const struct iphdr *iph, void *data,
 			int datalen, __sum16 *check, int oldlen)
 {
 	struct rtable *rt = skb_rtable(skb);
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
new file mode 100644
index 00000000000..1f3bb11490c
--- /dev/null
+++ b/net/ipv4/ping.c
@@ -0,0 +1,935 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		"Ping" sockets
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ * Based on ipv4/udp.c code.
+ *
+ * Authors:	Vasiliy Kulikov / Openwall (for Linux 2.6),
+ *		Pavel Kankovsky (for Linux 2.4.32)
+ *
+ * Pavel gave all rights to bugs to Vasiliy,
+ * none of the bugs are Pavel's now.
+ *
+ */
+
+#include <asm/system.h>
+#include <linux/uaccess.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <linux/in.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <net/snmp.h>
+#include <net/ip.h>
+#include <net/ipv6.h>
+#include <net/icmp.h>
+#include <net/protocol.h>
+#include <linux/skbuff.h>
+#include <linux/proc_fs.h>
+#include <net/sock.h>
+#include <net/ping.h>
+#include <net/icmp.h>
+#include <net/udp.h>
+#include <net/route.h>
+#include <net/inet_common.h>
+#include <net/checksum.h>
+
+
+static struct ping_table ping_table;
+
+static u16 ping_port_rover;
+
+static inline int ping_hashfn(struct net *net, unsigned num, unsigned mask)
+{
+	int res = (num + net_hash_mix(net)) & mask;
+	pr_debug("hash(%d) = %d\n", num, res);
+	return res;
+}
+
+static inline struct hlist_nulls_head *ping_hashslot(struct ping_table *table,
+					     struct net *net, unsigned num)
+{
+	return &table->hash[ping_hashfn(net, num, PING_HTABLE_MASK)];
+}
+
+static int ping_v4_get_port(struct sock *sk, unsigned short ident)
+{
+	struct hlist_nulls_node *node;
+	struct hlist_nulls_head *hlist;
+	struct inet_sock *isk, *isk2;
+	struct sock *sk2 = NULL;
+
+	isk = inet_sk(sk);
+	write_lock_bh(&ping_table.lock);
+	if (ident == 0) {
+		u32 i;
+		u16 result = ping_port_rover + 1;
+
+		for (i = 0; i < (1L << 16); i++, result++) {
+			if (!result)
+				result++; /* avoid zero */
+			hlist = ping_hashslot(&ping_table, sock_net(sk),
+					    result);
+			ping_portaddr_for_each_entry(sk2, node, hlist) {
+				isk2 = inet_sk(sk2);
+
+				if (isk2->inet_num == result)
+					goto next_port;
+			}
+
+			/* found */
+			ping_port_rover = ident = result;
+			break;
+next_port:
+			;
+		}
+		if (i >= (1L << 16))
+			goto fail;
+	} else {
+		hlist = ping_hashslot(&ping_table, sock_net(sk), ident);
+		ping_portaddr_for_each_entry(sk2, node, hlist) {
+			isk2 = inet_sk(sk2);
+
+			if ((isk2->inet_num == ident) &&
+			    (sk2 != sk) &&
+			    (!sk2->sk_reuse || !sk->sk_reuse))
+				goto fail;
+		}
+	}
+
+	pr_debug("found port/ident = %d\n", ident);
+	isk->inet_num = ident;
+	if (sk_unhashed(sk)) {
+		pr_debug("was not hashed\n");
+		sock_hold(sk);
+		hlist_nulls_add_head(&sk->sk_nulls_node, hlist);
+		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
+	}
+	write_unlock_bh(&ping_table.lock);
+	return 0;
+
+fail:
+	write_unlock_bh(&ping_table.lock);
+	return 1;
+}
+
+static void ping_v4_hash(struct sock *sk)
+{
+	pr_debug("ping_v4_hash(sk->port=%u)\n", inet_sk(sk)->inet_num);
+	BUG(); /* "Please do not press this button again." */
+}
+
+static void ping_v4_unhash(struct sock *sk)
+{
+	struct inet_sock *isk = inet_sk(sk);
+	pr_debug("ping_v4_unhash(isk=%p,isk->num=%u)\n", isk, isk->inet_num);
+	if (sk_hashed(sk)) {
+		struct hlist_nulls_head *hslot;
+
+		hslot = ping_hashslot(&ping_table, sock_net(sk), isk->inet_num);
+		write_lock_bh(&ping_table.lock);
+		hlist_nulls_del(&sk->sk_nulls_node);
+		sock_put(sk);
+		isk->inet_num = isk->inet_sport = 0;
+		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
+		write_unlock_bh(&ping_table.lock);
+	}
+}
+
+static struct sock *ping_v4_lookup(struct net *net, u32 saddr, u32 daddr,
+				   u16 ident, int dif)
+{
+	struct hlist_nulls_head *hslot = ping_hashslot(&ping_table, net, ident);
+	struct sock *sk = NULL;
+	struct inet_sock *isk;
+	struct hlist_nulls_node *hnode;
+
+	pr_debug("try to find: num = %d, daddr = %ld, dif = %d\n",
+			 (int)ident, (unsigned long)daddr, dif);
+	read_lock_bh(&ping_table.lock);
+
+	ping_portaddr_for_each_entry(sk, hnode, hslot) {
+		isk = inet_sk(sk);
+
+		pr_debug("found: %p: num = %d, daddr = %ld, dif = %d\n", sk,
+			 (int)isk->inet_num, (unsigned long)isk->inet_rcv_saddr,
+			 sk->sk_bound_dev_if);
+
+		pr_debug("iterate\n");
+		if (isk->inet_num != ident)
+			continue;
+		if (isk->inet_rcv_saddr && isk->inet_rcv_saddr != daddr)
+			continue;
+		if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif)
+			continue;
+
+		sock_hold(sk);
+		goto exit;
+	}
+
+	sk = NULL;
+exit:
+	read_unlock_bh(&ping_table.lock);
+
+	return sk;
+}
+
+static void inet_get_ping_group_range_net(struct net *net, gid_t *low,
+					  gid_t *high)
+{
+	gid_t *data = net->ipv4.sysctl_ping_group_range;
+	unsigned seq;
+	do {
+		seq = read_seqbegin(&sysctl_local_ports.lock);
+
+		*low = data[0];
+		*high = data[1];
+	} while (read_seqretry(&sysctl_local_ports.lock, seq));
+}
+
+
+static int ping_init_sock(struct sock *sk)
+{
+	struct net *net = sock_net(sk);
+	gid_t group = current_egid();
+	gid_t range[2];
+	struct group_info *group_info = get_current_groups();
+	int i, j, count = group_info->ngroups;
+
+	inet_get_ping_group_range_net(net, range, range+1);
+	if (range[0] <= group && group <= range[1])
+		return 0;
+
+	for (i = 0; i < group_info->nblocks; i++) {
+		int cp_count = min_t(int, NGROUPS_PER_BLOCK, count);
+
+		for (j = 0; j < cp_count; j++) {
+			group = group_info->blocks[i][j];
+			if (range[0] <= group && group <= range[1])
+				return 0;
+		}
+
+		count -= cp_count;
+	}
+
+	return -EACCES;
+}
+
+static void ping_close(struct sock *sk, long timeout)
+{
+	pr_debug("ping_close(sk=%p,sk->num=%u)\n",
+		inet_sk(sk), inet_sk(sk)->inet_num);
+	pr_debug("isk->refcnt = %d\n", sk->sk_refcnt.counter);
+
+	sk_common_release(sk);
+}
+
+/*
+ * We need our own bind because there are no privileged id's == local ports.
+ * Moreover, we don't allow binding to multi- and broadcast addresses.
+ */
+
+static int ping_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
+{
+	struct sockaddr_in *addr = (struct sockaddr_in *)uaddr;
+	struct inet_sock *isk = inet_sk(sk);
+	unsigned short snum;
+	int chk_addr_ret;
+	int err;
+
+	if (addr_len < sizeof(struct sockaddr_in))
+		return -EINVAL;
+
+	pr_debug("ping_v4_bind(sk=%p,sa_addr=%08x,sa_port=%d)\n",
+		sk, addr->sin_addr.s_addr, ntohs(addr->sin_port));
+
+	chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr);
+	if (addr->sin_addr.s_addr == INADDR_ANY)
+		chk_addr_ret = RTN_LOCAL;
+
+	if ((sysctl_ip_nonlocal_bind == 0 &&
+	    isk->freebind == 0 && isk->transparent == 0 &&
+	     chk_addr_ret != RTN_LOCAL) ||
+	    chk_addr_ret == RTN_MULTICAST ||
+	    chk_addr_ret == RTN_BROADCAST)
+		return -EADDRNOTAVAIL;
+
+	lock_sock(sk);
+
+	err = -EINVAL;
+	if (isk->inet_num != 0)
+		goto out;
+
+	err = -EADDRINUSE;
+	isk->inet_rcv_saddr = isk->inet_saddr = addr->sin_addr.s_addr;
+	snum = ntohs(addr->sin_port);
+	if (ping_v4_get_port(sk, snum) != 0) {
+		isk->inet_saddr = isk->inet_rcv_saddr = 0;
+		goto out;
+	}
+
+	pr_debug("after bind(): num = %d, daddr = %ld, dif = %d\n",
+		(int)isk->inet_num,
+		(unsigned long) isk->inet_rcv_saddr,
+		(int)sk->sk_bound_dev_if);
+
+	err = 0;
+	if (isk->inet_rcv_saddr)
+		sk->sk_userlocks |= SOCK_BINDADDR_LOCK;
+	if (snum)
+		sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
+	isk->inet_sport = htons(isk->inet_num);
+	isk->inet_daddr = 0;
+	isk->inet_dport = 0;
+	sk_dst_reset(sk);
+out:
+	release_sock(sk);
+	pr_debug("ping_v4_bind -> %d\n", err);
+	return err;
+}
+
+/*
+ * Is this a supported type of ICMP message?
+ */
+
+static inline int ping_supported(int type, int code)
+{
+	if (type == ICMP_ECHO && code == 0)
+		return 1;
+	return 0;
+}
+
+/*
+ * This routine is called by the ICMP module when it gets some
+ * sort of error condition.
+ */
+
+static int ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
+
+void ping_err(struct sk_buff *skb, u32 info)
+{
+	struct iphdr *iph = (struct iphdr *)skb->data;
+	struct icmphdr *icmph = (struct icmphdr *)(skb->data+(iph->ihl<<2));
+	struct inet_sock *inet_sock;
+	int type = icmph->type;
+	int code = icmph->code;
+	struct net *net = dev_net(skb->dev);
+	struct sock *sk;
+	int harderr;
+	int err;
+
+	/* We assume the packet has already been checked by icmp_unreach */
+
+	if (!ping_supported(icmph->type, icmph->code))
+		return;
+
+	pr_debug("ping_err(type=%04x,code=%04x,id=%04x,seq=%04x)\n", type,
+		code, ntohs(icmph->un.echo.id), ntohs(icmph->un.echo.sequence));
+
+	sk = ping_v4_lookup(net, iph->daddr, iph->saddr,
+			    ntohs(icmph->un.echo.id), skb->dev->ifindex);
+	if (sk == NULL) {
+		ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
+		pr_debug("no socket, dropping\n");
+		return;	/* No socket for error */
+	}
+	pr_debug("err on socket %p\n", sk);
+
+	err = 0;
+	harderr = 0;
+	inet_sock = inet_sk(sk);
+
+	switch (type) {
+	default:
+	case ICMP_TIME_EXCEEDED:
+		err = EHOSTUNREACH;
+		break;
+	case ICMP_SOURCE_QUENCH:
+		/* This is not a real error but ping wants to see it.
+		 * Report it with some fake errno. */
+		err = EREMOTEIO;
+		break;
+	case ICMP_PARAMETERPROB:
+		err = EPROTO;
+		harderr = 1;
+		break;
+	case ICMP_DEST_UNREACH:
+		if (code == ICMP_FRAG_NEEDED) { /* Path MTU discovery */
+			if (inet_sock->pmtudisc != IP_PMTUDISC_DONT) {
+				err = EMSGSIZE;
+				harderr = 1;
+				break;
+			}
+			goto out;
+		}
+		err = EHOSTUNREACH;
+		if (code <= NR_ICMP_UNREACH) {
+			harderr = icmp_err_convert[code].fatal;
+			err = icmp_err_convert[code].errno;
+		}
+		break;
+	case ICMP_REDIRECT:
+		/* See ICMP_SOURCE_QUENCH */
+		err = EREMOTEIO;
+		break;
+	}
+
+	/*
+	 *      RFC1122: OK.  Passes ICMP errors back to application, as per
+	 *	4.1.3.3.
+	 */
+	if (!inet_sock->recverr) {
+		if (!harderr || sk->sk_state != TCP_ESTABLISHED)
+			goto out;
+	} else {
+		ip_icmp_error(sk, skb, err, 0 /* no remote port */,
+			 info, (u8 *)icmph);
+	}
+	sk->sk_err = err;
+	sk->sk_error_report(sk);
+out:
+	sock_put(sk);
+}
+
+/*
+ *	Copy and checksum an ICMP Echo packet from user space into a buffer.
+ */
+
+struct pingfakehdr {
+	struct icmphdr icmph;
+	struct iovec *iov;
+	u32 wcheck;
+};
+
+static int ping_getfrag(void *from, char * to,
+			int offset, int fraglen, int odd, struct sk_buff *skb)
+{
+	struct pingfakehdr *pfh = (struct pingfakehdr *)from;
+
+	if (offset == 0) {
+		if (fraglen < sizeof(struct icmphdr))
+			BUG();
+		if (csum_partial_copy_fromiovecend(to + sizeof(struct icmphdr),
+			    pfh->iov, 0, fraglen - sizeof(struct icmphdr),
+			    &pfh->wcheck))
+			return -EFAULT;
+
+		return 0;
+	}
+	if (offset < sizeof(struct icmphdr))
+		BUG();
+	if (csum_partial_copy_fromiovecend
+			(to, pfh->iov, offset - sizeof(struct icmphdr),
+			 fraglen, &pfh->wcheck))
+		return -EFAULT;
+	return 0;
+}
+
+static int ping_push_pending_frames(struct sock *sk, struct pingfakehdr *pfh,
+				    struct flowi4 *fl4)
+{
+	struct sk_buff *skb = skb_peek(&sk->sk_write_queue);
+
+	pfh->wcheck = csum_partial((char *)&pfh->icmph,
+		sizeof(struct icmphdr), pfh->wcheck);
+	pfh->icmph.checksum = csum_fold(pfh->wcheck);
+	memcpy(icmp_hdr(skb), &pfh->icmph, sizeof(struct icmphdr));
+	skb->ip_summed = CHECKSUM_NONE;
+	return ip_push_pending_frames(sk, fl4);
+}
+
+static int ping_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+			size_t len)
+{
+	struct net *net = sock_net(sk);
+	struct flowi4 fl4;
+	struct inet_sock *inet = inet_sk(sk);
+	struct ipcm_cookie ipc;
+	struct icmphdr user_icmph;
+	struct pingfakehdr pfh;
+	struct rtable *rt = NULL;
+	struct ip_options_data opt_copy;
+	int free = 0;
+	u32 saddr, daddr, faddr;
+	u8  tos;
+	int err;
+
+	pr_debug("ping_sendmsg(sk=%p,sk->num=%u)\n", inet, inet->inet_num);
+
+
+	if (len > 0xFFFF)
+		return -EMSGSIZE;
+
+	/*
+	 *	Check the flags.
+	 */
+
+	/* Mirror BSD error message compatibility */
+	if (msg->msg_flags & MSG_OOB)
+		return -EOPNOTSUPP;
+
+	/*
+	 *	Fetch the ICMP header provided by the userland.
+	 *	iovec is modified!
+	 */
+
+	if (memcpy_fromiovec((u8 *)&user_icmph, msg->msg_iov,
+			     sizeof(struct icmphdr)))
+		return -EFAULT;
+	if (!ping_supported(user_icmph.type, user_icmph.code))
+		return -EINVAL;
+
+	/*
+	 *	Get and verify the address.
+	 */
+
+	if (msg->msg_name) {
+		struct sockaddr_in *usin = (struct sockaddr_in *)msg->msg_name;
+		if (msg->msg_namelen < sizeof(*usin))
+			return -EINVAL;
+		if (usin->sin_family != AF_INET)
+			return -EINVAL;
+		daddr = usin->sin_addr.s_addr;
+		/* no remote port */
+	} else {
+		if (sk->sk_state != TCP_ESTABLISHED)
+			return -EDESTADDRREQ;
+		daddr = inet->inet_daddr;
+		/* no remote port */
+	}
+
+	ipc.addr = inet->inet_saddr;
+	ipc.opt = NULL;
+	ipc.oif = sk->sk_bound_dev_if;
+	ipc.tx_flags = 0;
+	err = sock_tx_timestamp(sk, &ipc.tx_flags);
+	if (err)
+		return err;
+
+	if (msg->msg_controllen) {
+		err = ip_cmsg_send(sock_net(sk), msg, &ipc);
+		if (err)
+			return err;
+		if (ipc.opt)
+			free = 1;
+	}
+	if (!ipc.opt) {
+		struct ip_options_rcu *inet_opt;
+
+		rcu_read_lock();
+		inet_opt = rcu_dereference(inet->inet_opt);
+		if (inet_opt) {
+			memcpy(&opt_copy, inet_opt,
+			       sizeof(*inet_opt) + inet_opt->opt.optlen);
+			ipc.opt = &opt_copy.opt;
+		}
+		rcu_read_unlock();
+	}
+
+	saddr = ipc.addr;
+	ipc.addr = faddr = daddr;
+
+	if (ipc.opt && ipc.opt->opt.srr) {
+		if (!daddr)
+			return -EINVAL;
+		faddr = ipc.opt->opt.faddr;
+	}
+	tos = RT_TOS(inet->tos);
+	if (sock_flag(sk, SOCK_LOCALROUTE) ||
+	    (msg->msg_flags & MSG_DONTROUTE) ||
+	    (ipc.opt && ipc.opt->opt.is_strictroute)) {
+		tos |= RTO_ONLINK;
+	}
+
+	if (ipv4_is_multicast(daddr)) {
+		if (!ipc.oif)
+			ipc.oif = inet->mc_index;
+		if (!saddr)
+			saddr = inet->mc_addr;
+	}
+
+	flowi4_init_output(&fl4, ipc.oif, sk->sk_mark, tos,
+			   RT_SCOPE_UNIVERSE, sk->sk_protocol,
+			   inet_sk_flowi_flags(sk), faddr, saddr, 0, 0);
+
+	security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
+	rt = ip_route_output_flow(net, &fl4, sk);
+	if (IS_ERR(rt)) {
+		err = PTR_ERR(rt);
+		rt = NULL;
+		if (err == -ENETUNREACH)
+			IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
+		goto out;
+	}
+
+	err = -EACCES;
+	if ((rt->rt_flags & RTCF_BROADCAST) &&
+	    !sock_flag(sk, SOCK_BROADCAST))
+		goto out;
+
+	if (msg->msg_flags & MSG_CONFIRM)
+		goto do_confirm;
+back_from_confirm:
+
+	if (!ipc.addr)
+		ipc.addr = fl4.daddr;
+
+	lock_sock(sk);
+
+	pfh.icmph.type = user_icmph.type; /* already checked */
+	pfh.icmph.code = user_icmph.code; /* ditto */
+	pfh.icmph.checksum = 0;
+	pfh.icmph.un.echo.id = inet->inet_sport;
+	pfh.icmph.un.echo.sequence = user_icmph.un.echo.sequence;
+	pfh.iov = msg->msg_iov;
+	pfh.wcheck = 0;
+
+	err = ip_append_data(sk, &fl4, ping_getfrag, &pfh, len,
+			0, &ipc, &rt, msg->msg_flags);
+	if (err)
+		ip_flush_pending_frames(sk);
+	else
+		err = ping_push_pending_frames(sk, &pfh, &fl4);
+	release_sock(sk);
+
+out:
+	ip_rt_put(rt);
+	if (free)
+		kfree(ipc.opt);
+	if (!err) {
+		icmp_out_count(sock_net(sk), user_icmph.type);
+		return len;
+	}
+	return err;
+
+do_confirm:
+	dst_confirm(&rt->dst);
+	if (!(msg->msg_flags & MSG_PROBE) || len)
+		goto back_from_confirm;
+	err = 0;
+	goto out;
+}
+
+static int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+			size_t len, int noblock, int flags, int *addr_len)
+{
+	struct inet_sock *isk = inet_sk(sk);
+	struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name;
+	struct sk_buff *skb;
+	int copied, err;
+
+	pr_debug("ping_recvmsg(sk=%p,sk->num=%u)\n", isk, isk->inet_num);
+
+	if (flags & MSG_OOB)
+		goto out;
+
+	if (addr_len)
+		*addr_len = sizeof(*sin);
+
+	if (flags & MSG_ERRQUEUE)
+		return ip_recv_error(sk, msg, len);
+
+	skb = skb_recv_datagram(sk, flags, noblock, &err);
+	if (!skb)
+		goto out;
+
+	copied = skb->len;
+	if (copied > len) {
+		msg->msg_flags |= MSG_TRUNC;
+		copied = len;
+	}
+
+	/* Don't bother checking the checksum */
+	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+	if (err)
+		goto done;
+
+	sock_recv_timestamp(msg, sk, skb);
+
+	/* Copy the address. */
+	if (sin) {
+		sin->sin_family = AF_INET;
+		sin->sin_port = 0 /* skb->h.uh->source */;
+		sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
+		memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
+	}
+	if (isk->cmsg_flags)
+		ip_cmsg_recv(msg, skb);
+	err = copied;
+
+done:
+	skb_free_datagram(sk, skb);
+out:
+	pr_debug("ping_recvmsg -> %d\n", err);
+	return err;
+}
+
+static int ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+	pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n",
+		inet_sk(sk), inet_sk(sk)->inet_num, skb);
+	if (sock_queue_rcv_skb(sk, skb) < 0) {
+		ICMP_INC_STATS_BH(sock_net(sk), ICMP_MIB_INERRORS);
+		kfree_skb(skb);
+		pr_debug("ping_queue_rcv_skb -> failed\n");
+		return -1;
+	}
+	return 0;
+}
+
+
+/*
+ *	All we need to do is get the socket.
+ */
+
+void ping_rcv(struct sk_buff *skb)
+{
+	struct sock *sk;
+	struct net *net = dev_net(skb->dev);
+	struct iphdr *iph = ip_hdr(skb);
+	struct icmphdr *icmph = icmp_hdr(skb);
+	u32 saddr = iph->saddr;
+	u32 daddr = iph->daddr;
+
+	/* We assume the packet has already been checked by icmp_rcv */
+
+	pr_debug("ping_rcv(skb=%p,id=%04x,seq=%04x)\n",
+		skb, ntohs(icmph->un.echo.id), ntohs(icmph->un.echo.sequence));
+
+	/* Push ICMP header back */
+	skb_push(skb, skb->data - (u8 *)icmph);
+
+	sk = ping_v4_lookup(net, saddr, daddr, ntohs(icmph->un.echo.id),
+			    skb->dev->ifindex);
+	if (sk != NULL) {
+		pr_debug("rcv on socket %p\n", sk);
+		ping_queue_rcv_skb(sk, skb_get(skb));
+		sock_put(sk);
+		return;
+	}
+	pr_debug("no socket, dropping\n");
+
+	/* We're called from icmp_rcv(). kfree_skb() is done there. */
+}
+
+struct proto ping_prot = {
+	.name =		"PING",
+	.owner =	THIS_MODULE,
+	.init =		ping_init_sock,
+	.close =	ping_close,
+	.connect =	ip4_datagram_connect,
+	.disconnect =	udp_disconnect,
+	.setsockopt =	ip_setsockopt,
+	.getsockopt =	ip_getsockopt,
+	.sendmsg =	ping_sendmsg,
+	.recvmsg =	ping_recvmsg,
+	.bind =		ping_bind,
+	.backlog_rcv =	ping_queue_rcv_skb,
+	.hash =		ping_v4_hash,
+	.unhash =	ping_v4_unhash,
+	.get_port =	ping_v4_get_port,
+	.obj_size =	sizeof(struct inet_sock),
+};
+EXPORT_SYMBOL(ping_prot);
+
+#ifdef CONFIG_PROC_FS
+
+static struct sock *ping_get_first(struct seq_file *seq, int start)
+{
+	struct sock *sk;
+	struct ping_iter_state *state = seq->private;
+	struct net *net = seq_file_net(seq);
+
+	for (state->bucket = start; state->bucket < PING_HTABLE_SIZE;
+	     ++state->bucket) {
+		struct hlist_nulls_node *node;
+		struct hlist_nulls_head *hslot;
+
+		hslot = &ping_table.hash[state->bucket];
+
+		if (hlist_nulls_empty(hslot))
+			continue;
+
+		sk_nulls_for_each(sk, node, hslot) {
+			if (net_eq(sock_net(sk), net))
+				goto found;
+		}
+	}
+	sk = NULL;
+found:
+	return sk;
+}
+
+static struct sock *ping_get_next(struct seq_file *seq, struct sock *sk)
+{
+	struct ping_iter_state *state = seq->private;
+	struct net *net = seq_file_net(seq);
+
+	do {
+		sk = sk_nulls_next(sk);
+	} while (sk && (!net_eq(sock_net(sk), net)));
+
+	if (!sk)
+		return ping_get_first(seq, state->bucket + 1);
+	return sk;
+}
+
+static struct sock *ping_get_idx(struct seq_file *seq, loff_t pos)
+{
+	struct sock *sk = ping_get_first(seq, 0);
+
+	if (sk)
+		while (pos && (sk = ping_get_next(seq, sk)) != NULL)
+			--pos;
+	return pos ? NULL : sk;
+}
+
+static void *ping_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct ping_iter_state *state = seq->private;
+	state->bucket = 0;
+
+	read_lock_bh(&ping_table.lock);
+
+	return *pos ? ping_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
+}
+
+static void *ping_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct sock *sk;
+
+	if (v == SEQ_START_TOKEN)
+		sk = ping_get_idx(seq, 0);
+	else
+		sk = ping_get_next(seq, v);
+
+	++*pos;
+	return sk;
+}
+
+static void ping_seq_stop(struct seq_file *seq, void *v)
+{
+	read_unlock_bh(&ping_table.lock);
+}
+
+static void ping_format_sock(struct sock *sp, struct seq_file *f,
+		int bucket, int *len)
+{
+	struct inet_sock *inet = inet_sk(sp);
+	__be32 dest = inet->inet_daddr;
+	__be32 src = inet->inet_rcv_saddr;
+	__u16 destp = ntohs(inet->inet_dport);
+	__u16 srcp = ntohs(inet->inet_sport);
+
+	seq_printf(f, "%5d: %08X:%04X %08X:%04X"
+		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %pK %d%n",
+		bucket, src, srcp, dest, destp, sp->sk_state,
+		sk_wmem_alloc_get(sp),
+		sk_rmem_alloc_get(sp),
+		0, 0L, 0, sock_i_uid(sp), 0, sock_i_ino(sp),
+		atomic_read(&sp->sk_refcnt), sp,
+		atomic_read(&sp->sk_drops), len);
+}
+
+static int ping_seq_show(struct seq_file *seq, void *v)
+{
+	if (v == SEQ_START_TOKEN)
+		seq_printf(seq, "%-127s\n",
+			   "  sl  local_address rem_address   st tx_queue "
+			   "rx_queue tr tm->when retrnsmt   uid  timeout "
+			   "inode ref pointer drops");
+	else {
+		struct ping_iter_state *state = seq->private;
+		int len;
+
+		ping_format_sock(v, seq, state->bucket, &len);
+		seq_printf(seq, "%*s\n", 127 - len, "");
+	}
+	return 0;
+}
+
+static const struct seq_operations ping_seq_ops = {
+	.show		= ping_seq_show,
+	.start		= ping_seq_start,
+	.next		= ping_seq_next,
+	.stop		= ping_seq_stop,
+};
+
+static int ping_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open_net(inode, file, &ping_seq_ops,
+			   sizeof(struct ping_iter_state));
+}
+
+static const struct file_operations ping_seq_fops = {
+	.open		= ping_seq_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release_net,
+};
+
+static int ping_proc_register(struct net *net)
+{
+	struct proc_dir_entry *p;
+	int rc = 0;
+
+	p = proc_net_fops_create(net, "icmp", S_IRUGO, &ping_seq_fops);
+	if (!p)
+		rc = -ENOMEM;
+	return rc;
+}
+
+static void ping_proc_unregister(struct net *net)
+{
+	proc_net_remove(net, "icmp");
+}
+
+
+static int __net_init ping_proc_init_net(struct net *net)
+{
+	return ping_proc_register(net);
+}
+
+static void __net_exit ping_proc_exit_net(struct net *net)
+{
+	ping_proc_unregister(net);
+}
+
+static struct pernet_operations ping_net_ops = {
+	.init = ping_proc_init_net,
+	.exit = ping_proc_exit_net,
+};
+
+int __init ping_proc_init(void)
+{
+	return register_pernet_subsys(&ping_net_ops);
+}
+
+void ping_proc_exit(void)
+{
+	unregister_pernet_subsys(&ping_net_ops);
+}
+
+#endif
+
+void __init ping_init(void)
+{
+	int i;
+
+	for (i = 0; i < PING_HTABLE_SIZE; i++)
+		INIT_HLIST_NULLS_HEAD(&ping_table.hash[i], i);
+	rwlock_init(&ping_table.lock);
+}
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 2d3c72e5bbb..11e1780455f 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -154,7 +154,7 @@ static __inline__ int icmp_filter(struct sock *sk, struct sk_buff *skb)
  * RFC 1122: SHOULD pass TOS value up to the transport layer.
  * -> It does. And not only TOS, but all IP header.
  */
-static int raw_v4_input(struct sk_buff *skb, struct iphdr *iph, int hash)
+static int raw_v4_input(struct sk_buff *skb, const struct iphdr *iph, int hash)
 {
 	struct sock *sk;
 	struct hlist_head *head;
@@ -247,7 +247,7 @@ static void raw_err(struct sock *sk, struct sk_buff *skb, u32 info)
 	}
 
 	if (inet->recverr) {
-		struct iphdr *iph = (struct iphdr *)skb->data;
+		const struct iphdr *iph = (const struct iphdr *)skb->data;
 		u8 *payload = skb->data + (iph->ihl << 2);
 
 		if (inet->hdrincl)
@@ -265,7 +265,7 @@ void raw_icmp_error(struct sk_buff *skb, int protocol, u32 info)
 {
 	int hash;
 	struct sock *raw_sk;
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	struct net *net;
 
 	hash = protocol & (RAW_HTABLE_SIZE - 1);
@@ -273,7 +273,7 @@ void raw_icmp_error(struct sk_buff *skb, int protocol, u32 info)
 	read_lock(&raw_v4_hashinfo.lock);
 	raw_sk = sk_head(&raw_v4_hashinfo.ht[hash]);
 	if (raw_sk != NULL) {
-		iph = (struct iphdr *)skb->data;
+		iph = (const struct iphdr *)skb->data;
 		net = dev_net(skb->dev);
 
 		while ((raw_sk = __raw_v4_lookup(net, raw_sk, protocol,
@@ -281,7 +281,7 @@ void raw_icmp_error(struct sk_buff *skb, int protocol, u32 info)
 						skb->dev->ifindex)) != NULL) {
 			raw_err(raw_sk, skb, info);
 			raw_sk = sk_next(raw_sk);
-			iph = (struct iphdr *)skb->data;
+			iph = (const struct iphdr *)skb->data;
 		}
 	}
 	read_unlock(&raw_v4_hashinfo.lock);
@@ -314,9 +314,10 @@ int raw_rcv(struct sock *sk, struct sk_buff *skb)
 	return 0;
 }
 
-static int raw_send_hdrinc(struct sock *sk, void *from, size_t length,
-			struct rtable **rtp,
-			unsigned int flags)
+static int raw_send_hdrinc(struct sock *sk, struct flowi4 *fl4,
+			   void *from, size_t length,
+			   struct rtable **rtp,
+			   unsigned int flags)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct net *net = sock_net(sk);
@@ -327,7 +328,7 @@ static int raw_send_hdrinc(struct sock *sk, void *from, size_t length,
 	struct rtable *rt = *rtp;
 
 	if (length > rt->dst.dev->mtu) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport,
+		ip_local_error(sk, EMSGSIZE, fl4->daddr, inet->inet_dport,
 			       rt->dst.dev->mtu);
 		return -EMSGSIZE;
 	}
@@ -372,7 +373,7 @@ static int raw_send_hdrinc(struct sock *sk, void *from, size_t length,
 
 	if (iphlen >= sizeof(*iph)) {
 		if (!iph->saddr)
-			iph->saddr = rt->rt_src;
+			iph->saddr = fl4->saddr;
 		iph->check   = 0;
 		iph->tot_len = htons(length);
 		if (!iph->id)
@@ -455,11 +456,13 @@ static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	struct inet_sock *inet = inet_sk(sk);
 	struct ipcm_cookie ipc;
 	struct rtable *rt = NULL;
+	struct flowi4 fl4;
 	int free = 0;
 	__be32 daddr;
 	__be32 saddr;
 	u8  tos;
 	int err;
+	struct ip_options_data opt_copy;
 
 	err = -EMSGSIZE;
 	if (len > 0xFFFF)
@@ -520,8 +523,18 @@ static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	saddr = ipc.addr;
 	ipc.addr = daddr;
 
-	if (!ipc.opt)
-		ipc.opt = inet->opt;
+	if (!ipc.opt) {
+		struct ip_options_rcu *inet_opt;
+
+		rcu_read_lock();
+		inet_opt = rcu_dereference(inet->inet_opt);
+		if (inet_opt) {
+			memcpy(&opt_copy, inet_opt,
+			       sizeof(*inet_opt) + inet_opt->opt.optlen);
+			ipc.opt = &opt_copy.opt;
+		}
+		rcu_read_unlock();
+	}
 
 	if (ipc.opt) {
 		err = -EINVAL;
@@ -530,10 +543,10 @@ static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		 */
 		if (inet->hdrincl)
 			goto done;
-		if (ipc.opt->srr) {
+		if (ipc.opt->opt.srr) {
 			if (!daddr)
 				goto done;
-			daddr = ipc.opt->faddr;
+			daddr = ipc.opt->opt.faddr;
 		}
 	}
 	tos = RT_CONN_FLAGS(sk);
@@ -547,31 +560,23 @@ static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 			saddr = inet->mc_addr;
 	}
 
-	{
-		struct flowi4 fl4 = {
-			.flowi4_oif = ipc.oif,
-			.flowi4_mark = sk->sk_mark,
-			.daddr = daddr,
-			.saddr = saddr,
-			.flowi4_tos = tos,
-			.flowi4_proto = (inet->hdrincl ?
-					 IPPROTO_RAW :
-					 sk->sk_protocol),
-			.flowi4_flags = FLOWI_FLAG_CAN_SLEEP,
-		};
-		if (!inet->hdrincl) {
-			err = raw_probe_proto_opt(&fl4, msg);
-			if (err)
-				goto done;
-		}
+	flowi4_init_output(&fl4, ipc.oif, sk->sk_mark, tos,
+			   RT_SCOPE_UNIVERSE,
+			   inet->hdrincl ? IPPROTO_RAW : sk->sk_protocol,
+			   FLOWI_FLAG_CAN_SLEEP, daddr, saddr, 0, 0);
 
-		security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
-		rt = ip_route_output_flow(sock_net(sk), &fl4, sk);
-		if (IS_ERR(rt)) {
-			err = PTR_ERR(rt);
-			rt = NULL;
+	if (!inet->hdrincl) {
+		err = raw_probe_proto_opt(&fl4, msg);
+		if (err)
 			goto done;
-		}
+	}
+
+	security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
+	rt = ip_route_output_flow(sock_net(sk), &fl4, sk);
+	if (IS_ERR(rt)) {
+		err = PTR_ERR(rt);
+		rt = NULL;
+		goto done;
 	}
 
 	err = -EACCES;
@@ -583,19 +588,20 @@ static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 back_from_confirm:
 
 	if (inet->hdrincl)
-		err = raw_send_hdrinc(sk, msg->msg_iov, len,
-					&rt, msg->msg_flags);
+		err = raw_send_hdrinc(sk, &fl4, msg->msg_iov, len,
+				      &rt, msg->msg_flags);
 
 	 else {
 		if (!ipc.addr)
-			ipc.addr = rt->rt_dst;
+			ipc.addr = fl4.daddr;
 		lock_sock(sk);
-		err = ip_append_data(sk, ip_generic_getfrag, msg->msg_iov, len, 0,
-					&ipc, &rt, msg->msg_flags);
+		err = ip_append_data(sk, &fl4, ip_generic_getfrag,
+				     msg->msg_iov, len, 0,
+				     &ipc, &rt, msg->msg_flags);
 		if (err)
 			ip_flush_pending_frames(sk);
 		else if (!(msg->msg_flags & MSG_MORE)) {
-			err = ip_push_pending_frames(sk);
+			err = ip_push_pending_frames(sk, &fl4);
 			if (err == -ENOBUFS && !inet->recverr)
 				err = 0;
 		}
@@ -622,7 +628,7 @@ do_confirm:
 static void raw_close(struct sock *sk, long timeout)
 {
 	/*
-	 * Raw sockets may have direct kernel refereneces. Kill them.
+	 * Raw sockets may have direct kernel references. Kill them.
 	 */
 	ip_ra_control(sk, 0, NULL);
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 4b0c8118080..b24d58e6bbc 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -156,7 +156,7 @@ static u32 *ipv4_cow_metrics(struct dst_entry *dst, unsigned long old)
 	u32 *p = NULL;
 
 	if (!rt->peer)
-		rt_bind_peer(rt, 1);
+		rt_bind_peer(rt, rt->rt_dst, 1);
 
 	peer = rt->peer;
 	if (peer) {
@@ -424,7 +424,7 @@ static int rt_cache_seq_show(struct seq_file *seq, void *v)
 			dst_metric(&r->dst, RTAX_WINDOW),
 			(int)((dst_metric(&r->dst, RTAX_RTT) >> 3) +
 			      dst_metric(&r->dst, RTAX_RTTVAR)),
-			r->rt_tos,
+			r->rt_key_tos,
 			r->dst.hh ? atomic_read(&r->dst.hh->hh_refcnt) : -1,
 			r->dst.hh ? (r->dst.hh->hh_output ==
 				       dev_queue_xmit) : 0,
@@ -724,7 +724,7 @@ static inline int compare_keys(struct rtable *rt1, struct rtable *rt2)
 	return (((__force u32)rt1->rt_key_dst ^ (__force u32)rt2->rt_key_dst) |
 		((__force u32)rt1->rt_key_src ^ (__force u32)rt2->rt_key_src) |
 		(rt1->rt_mark ^ rt2->rt_mark) |
-		(rt1->rt_tos ^ rt2->rt_tos) |
+		(rt1->rt_key_tos ^ rt2->rt_key_tos) |
 		(rt1->rt_oif ^ rt2->rt_oif) |
 		(rt1->rt_iif ^ rt2->rt_iif)) == 0;
 }
@@ -821,7 +821,7 @@ static int has_noalias(const struct rtable *head, const struct rtable *rth)
 }
 
 /*
- * Pertubation of rt_genid by a small quantity [1..256]
+ * Perturbation of rt_genid by a small quantity [1..256]
  * Using 8 bits of shuffling ensure we can call rt_cache_invalidate()
  * many times (2^24) without giving recent rt_genid.
  * Jenkins hash is strong enough that litle changes of rt_genid are OK.
@@ -968,10 +968,6 @@ static int rt_garbage_collect(struct dst_ops *ops)
 			break;
 
 		expire >>= 1;
-#if RT_CACHE_DEBUG >= 2
-		printk(KERN_DEBUG "expire>> %u %d %d %d\n", expire,
-				dst_entries_get_fast(&ipv4_dst_ops), goal, i);
-#endif
 
 		if (dst_entries_get_fast(&ipv4_dst_ops) < ip_rt_max_size)
 			goto out;
@@ -992,10 +988,6 @@ work_done:
 	    dst_entries_get_fast(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh ||
 	    dst_entries_get_slow(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh)
 		expire = ip_rt_gc_timeout;
-#if RT_CACHE_DEBUG >= 2
-	printk(KERN_DEBUG "expire++ %u %d %d %d\n", expire,
-			dst_entries_get_fast(&ipv4_dst_ops), goal, rover);
-#endif
 out:	return 0;
 }
 
@@ -1179,19 +1171,9 @@ restart:
 
 	rt->dst.rt_next = rt_hash_table[hash].chain;
 
-#if RT_CACHE_DEBUG >= 2
-	if (rt->dst.rt_next) {
-		struct rtable *trt;
-		printk(KERN_DEBUG "rt_cache @%02x: %pI4",
-		       hash, &rt->rt_dst);
-		for (trt = rt->dst.rt_next; trt; trt = trt->dst.rt_next)
-			printk(" . %pI4", &trt->rt_dst);
-		printk("\n");
-	}
-#endif
 	/*
 	 * Since lookup is lockfree, we must make sure
-	 * previous writes to rt are comitted to memory
+	 * previous writes to rt are committed to memory
 	 * before making rt visible to other CPUS.
 	 */
 	rcu_assign_pointer(rt_hash_table[hash].chain, rt);
@@ -1211,11 +1193,11 @@ static u32 rt_peer_genid(void)
 	return atomic_read(&__rt_peer_genid);
 }
 
-void rt_bind_peer(struct rtable *rt, int create)
+void rt_bind_peer(struct rtable *rt, __be32 daddr, int create)
 {
 	struct inet_peer *peer;
 
-	peer = inet_getpeer_v4(rt->rt_dst, create);
+	peer = inet_getpeer_v4(daddr, create);
 
 	if (peer && cmpxchg(&rt->peer, NULL, peer) != NULL)
 		inet_putpeer(peer);
@@ -1249,7 +1231,7 @@ void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more)
 
 	if (rt) {
 		if (rt->peer == NULL)
-			rt_bind_peer(rt, 1);
+			rt_bind_peer(rt, rt->rt_dst, 1);
 
 		/* If peer is attached to destination, it is never detached,
 		   so that we need not to grab a lock to dereference it.
@@ -1347,10 +1329,6 @@ static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst)
 			unsigned hash = rt_hash(rt->rt_key_dst, rt->rt_key_src,
 						rt->rt_oif,
 						rt_genid(dev_net(dst->dev)));
-#if RT_CACHE_DEBUG >= 1
-			printk(KERN_DEBUG "ipv4_negative_advice: redirect to %pI4/%02x dropped\n",
-				&rt->rt_dst, rt->rt_tos);
-#endif
 			rt_del(hash, rt);
 			ret = NULL;
 		} else if (rt->peer &&
@@ -1399,7 +1377,7 @@ void ip_rt_send_redirect(struct sk_buff *skb)
 	rcu_read_unlock();
 
 	if (!rt->peer)
-		rt_bind_peer(rt, 1);
+		rt_bind_peer(rt, rt->rt_dst, 1);
 	peer = rt->peer;
 	if (!peer) {
 		icmp_send(skb, ICMP_REDIRECT, ICMP_REDIR_HOST, rt->rt_gateway);
@@ -1435,7 +1413,7 @@ void ip_rt_send_redirect(struct sk_buff *skb)
 		    peer->rate_tokens == ip_rt_redirect_number &&
 		    net_ratelimit())
 			printk(KERN_WARNING "host %pI4/if%d ignores redirects for %pI4 to %pI4.\n",
-				&rt->rt_src, rt->rt_iif,
+			       &ip_hdr(skb)->saddr, rt->rt_iif,
 				&rt->rt_dst, &rt->rt_gateway);
 #endif
 	}
@@ -1467,7 +1445,7 @@ static int ip_error(struct sk_buff *skb)
 	}
 
 	if (!rt->peer)
-		rt_bind_peer(rt, 1);
+		rt_bind_peer(rt, rt->rt_dst, 1);
 	peer = rt->peer;
 
 	send = true;
@@ -1507,7 +1485,7 @@ static inline unsigned short guess_mtu(unsigned short old_mtu)
 	return 68;
 }
 
-unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph,
+unsigned short ip_rt_frag_needed(struct net *net, const struct iphdr *iph,
 				 unsigned short new_mtu,
 				 struct net_device *dev)
 {
@@ -1574,7 +1552,7 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu)
 	dst_confirm(dst);
 
 	if (!rt->peer)
-		rt_bind_peer(rt, 1);
+		rt_bind_peer(rt, rt->rt_dst, 1);
 	peer = rt->peer;
 	if (peer) {
 		if (mtu < ip_rt_min_pmtu)
@@ -1631,7 +1609,7 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie)
 		struct inet_peer *peer;
 
 		if (!rt->peer)
-			rt_bind_peer(rt, 0);
+			rt_bind_peer(rt, rt->rt_dst, 0);
 
 		peer = rt->peer;
 		if (peer && peer->pmtu_expires)
@@ -1699,22 +1677,26 @@ static int ip_rt_bug(struct sk_buff *skb)
    in IP options!
  */
 
-void ip_rt_get_source(u8 *addr, struct rtable *rt)
+void ip_rt_get_source(u8 *addr, struct sk_buff *skb, struct rtable *rt)
 {
 	__be32 src;
-	struct fib_result res;
 
 	if (rt_is_output_route(rt))
-		src = rt->rt_src;
+		src = ip_hdr(skb)->saddr;
 	else {
-		struct flowi4 fl4 = {
-			.daddr = rt->rt_key_dst,
-			.saddr = rt->rt_key_src,
-			.flowi4_tos = rt->rt_tos,
-			.flowi4_oif = rt->rt_oif,
-			.flowi4_iif = rt->rt_iif,
-			.flowi4_mark = rt->rt_mark,
-		};
+		struct fib_result res;
+		struct flowi4 fl4;
+		struct iphdr *iph;
+
+		iph = ip_hdr(skb);
+
+		memset(&fl4, 0, sizeof(fl4));
+		fl4.daddr = iph->daddr;
+		fl4.saddr = iph->saddr;
+		fl4.flowi4_tos = iph->tos;
+		fl4.flowi4_oif = rt->dst.dev->ifindex;
+		fl4.flowi4_iif = skb->dev->ifindex;
+		fl4.flowi4_mark = skb->mark;
 
 		rcu_read_lock();
 		if (fib_lookup(dev_net(rt->dst.dev), &fl4, &res) == 0)
@@ -1767,7 +1749,7 @@ static unsigned int ipv4_default_mtu(const struct dst_entry *dst)
 	return mtu;
 }
 
-static void rt_init_metrics(struct rtable *rt, const struct flowi4 *oldflp4,
+static void rt_init_metrics(struct rtable *rt, const struct flowi4 *fl4,
 			    struct fib_info *fi)
 {
 	struct inet_peer *peer;
@@ -1776,7 +1758,7 @@ static void rt_init_metrics(struct rtable *rt, const struct flowi4 *oldflp4,
 	/* If a peer entry exists for this destination, we must hook
 	 * it up in order to get at cached metrics.
 	 */
-	if (oldflp4 && (oldflp4->flowi4_flags & FLOWI_FLAG_PRECOW_METRICS))
+	if (fl4 && (fl4->flowi4_flags & FLOWI_FLAG_PRECOW_METRICS))
 		create = 1;
 
 	rt->peer = peer = inet_getpeer_v4(rt->rt_dst, create);
@@ -1803,7 +1785,7 @@ static void rt_init_metrics(struct rtable *rt, const struct flowi4 *oldflp4,
 	}
 }
 
-static void rt_set_nexthop(struct rtable *rt, const struct flowi4 *oldflp4,
+static void rt_set_nexthop(struct rtable *rt, const struct flowi4 *fl4,
 			   const struct fib_result *res,
 			   struct fib_info *fi, u16 type, u32 itag)
 {
@@ -1813,7 +1795,7 @@ static void rt_set_nexthop(struct rtable *rt, const struct flowi4 *oldflp4,
 		if (FIB_RES_GW(*res) &&
 		    FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
 			rt->rt_gateway = FIB_RES_GW(*res);
-		rt_init_metrics(rt, oldflp4, fi);
+		rt_init_metrics(rt, fl4, fi);
 #ifdef CONFIG_IP_ROUTE_CLASSID
 		dst->tclassid = FIB_RES_NH(*res).nh_tclassid;
 #endif
@@ -1830,20 +1812,15 @@ static void rt_set_nexthop(struct rtable *rt, const struct flowi4 *oldflp4,
 #endif
 	set_class_tag(rt, itag);
 #endif
-	rt->rt_type = type;
 }
 
-static struct rtable *rt_dst_alloc(bool nopolicy, bool noxfrm)
+static struct rtable *rt_dst_alloc(struct net_device *dev,
+				   bool nopolicy, bool noxfrm)
 {
-	struct rtable *rt = dst_alloc(&ipv4_dst_ops, 1);
-	if (rt) {
-		rt->dst.obsolete = -1;
-
-		rt->dst.flags = DST_HOST |
-			(nopolicy ? DST_NOPOLICY : 0) |
-			(noxfrm ? DST_NOXFRM : 0);
-	}
-	return rt;
+	return dst_alloc(&ipv4_dst_ops, dev, 1, -1,
+			 DST_HOST |
+			 (nopolicy ? DST_NOPOLICY : 0) |
+			 (noxfrm ? DST_NOXFRM : 0));
 }
 
 /* called in rcu_read_lock() section */
@@ -1871,35 +1848,38 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 			goto e_inval;
 		spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
 	} else {
-		err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst,
-					  &itag, 0);
+		err = fib_validate_source(skb, saddr, 0, tos, 0, dev, &spec_dst,
+					  &itag);
 		if (err < 0)
 			goto e_err;
 	}
-	rth = rt_dst_alloc(IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
+	rth = rt_dst_alloc(init_net.loopback_dev,
+			   IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
 	if (!rth)
 		goto e_nobufs;
 
+#ifdef CONFIG_IP_ROUTE_CLASSID
+	rth->dst.tclassid = itag;
+#endif
 	rth->dst.output = ip_rt_bug;
 
 	rth->rt_key_dst	= daddr;
-	rth->rt_dst	= daddr;
-	rth->rt_tos	= tos;
-	rth->rt_mark    = skb->mark;
 	rth->rt_key_src	= saddr;
+	rth->rt_genid	= rt_genid(dev_net(dev));
+	rth->rt_flags	= RTCF_MULTICAST;
+	rth->rt_type	= RTN_MULTICAST;
+	rth->rt_key_tos	= tos;
+	rth->rt_dst	= daddr;
 	rth->rt_src	= saddr;
-#ifdef CONFIG_IP_ROUTE_CLASSID
-	rth->dst.tclassid = itag;
-#endif
+	rth->rt_route_iif = dev->ifindex;
 	rth->rt_iif	= dev->ifindex;
-	rth->dst.dev	= init_net.loopback_dev;
-	dev_hold(rth->dst.dev);
 	rth->rt_oif	= 0;
+	rth->rt_mark    = skb->mark;
 	rth->rt_gateway	= daddr;
 	rth->rt_spec_dst= spec_dst;
-	rth->rt_genid	= rt_genid(dev_net(dev));
-	rth->rt_flags	= RTCF_MULTICAST;
-	rth->rt_type	= RTN_MULTICAST;
+	rth->rt_peer_genid = 0;
+	rth->peer = NULL;
+	rth->fi = NULL;
 	if (our) {
 		rth->dst.input= ip_local_deliver;
 		rth->rt_flags |= RTCF_LOCAL;
@@ -1980,8 +1960,8 @@ static int __mkroute_input(struct sk_buff *skb,
 	}
 
 
-	err = fib_validate_source(saddr, daddr, tos, FIB_RES_OIF(*res),
-				  in_dev->dev, &spec_dst, &itag, skb->mark);
+	err = fib_validate_source(skb, saddr, daddr, tos, FIB_RES_OIF(*res),
+				  in_dev->dev, &spec_dst, &itag);
 	if (err < 0) {
 		ip_handle_martian_source(in_dev->dev, in_dev, skb, daddr,
 					 saddr);
@@ -2012,7 +1992,8 @@ static int __mkroute_input(struct sk_buff *skb,
 		}
 	}
 
-	rth = rt_dst_alloc(IN_DEV_CONF_GET(in_dev, NOPOLICY),
+	rth = rt_dst_alloc(out_dev->dev,
+			   IN_DEV_CONF_GET(in_dev, NOPOLICY),
 			   IN_DEV_CONF_GET(out_dev, NOXFRM));
 	if (!rth) {
 		err = -ENOBUFS;
@@ -2020,26 +2001,28 @@ static int __mkroute_input(struct sk_buff *skb,
 	}
 
 	rth->rt_key_dst	= daddr;
-	rth->rt_dst	= daddr;
-	rth->rt_tos	= tos;
-	rth->rt_mark    = skb->mark;
 	rth->rt_key_src	= saddr;
+	rth->rt_genid = rt_genid(dev_net(rth->dst.dev));
+	rth->rt_flags = flags;
+	rth->rt_type = res->type;
+	rth->rt_key_tos	= tos;
+	rth->rt_dst	= daddr;
 	rth->rt_src	= saddr;
-	rth->rt_gateway	= daddr;
+	rth->rt_route_iif = in_dev->dev->ifindex;
 	rth->rt_iif 	= in_dev->dev->ifindex;
-	rth->dst.dev	= (out_dev)->dev;
-	dev_hold(rth->dst.dev);
 	rth->rt_oif 	= 0;
+	rth->rt_mark    = skb->mark;
+	rth->rt_gateway	= daddr;
 	rth->rt_spec_dst= spec_dst;
+	rth->rt_peer_genid = 0;
+	rth->peer = NULL;
+	rth->fi = NULL;
 
 	rth->dst.input = ip_forward;
 	rth->dst.output = ip_output;
-	rth->rt_genid = rt_genid(dev_net(rth->dst.dev));
 
 	rt_set_nexthop(rth, NULL, res, res->fi, res->type, itag);
 
-	rth->rt_flags = flags;
-
 	*result = rth;
 	err = 0;
  cleanup:
@@ -2148,9 +2131,9 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 		goto brd_input;
 
 	if (res.type == RTN_LOCAL) {
-		err = fib_validate_source(saddr, daddr, tos,
+		err = fib_validate_source(skb, saddr, daddr, tos,
 					  net->loopback_dev->ifindex,
-					  dev, &spec_dst, &itag, skb->mark);
+					  dev, &spec_dst, &itag);
 		if (err < 0)
 			goto martian_source_keep_err;
 		if (err)
@@ -2174,8 +2157,8 @@ brd_input:
 	if (ipv4_is_zeronet(saddr))
 		spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
 	else {
-		err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst,
-					  &itag, skb->mark);
+		err = fib_validate_source(skb, saddr, 0, tos, 0, dev, &spec_dst,
+					  &itag);
 		if (err < 0)
 			goto martian_source_keep_err;
 		if (err)
@@ -2186,35 +2169,42 @@ brd_input:
 	RT_CACHE_STAT_INC(in_brd);
 
 local_input:
-	rth = rt_dst_alloc(IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
+	rth = rt_dst_alloc(net->loopback_dev,
+			   IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
 	if (!rth)
 		goto e_nobufs;
 
+	rth->dst.input= ip_local_deliver;
 	rth->dst.output= ip_rt_bug;
-	rth->rt_genid = rt_genid(net);
+#ifdef CONFIG_IP_ROUTE_CLASSID
+	rth->dst.tclassid = itag;
+#endif
 
 	rth->rt_key_dst	= daddr;
-	rth->rt_dst	= daddr;
-	rth->rt_tos	= tos;
-	rth->rt_mark    = skb->mark;
 	rth->rt_key_src	= saddr;
+	rth->rt_genid = rt_genid(net);
+	rth->rt_flags 	= flags|RTCF_LOCAL;
+	rth->rt_type	= res.type;
+	rth->rt_key_tos	= tos;
+	rth->rt_dst	= daddr;
 	rth->rt_src	= saddr;
 #ifdef CONFIG_IP_ROUTE_CLASSID
 	rth->dst.tclassid = itag;
 #endif
+	rth->rt_route_iif = dev->ifindex;
 	rth->rt_iif	= dev->ifindex;
-	rth->dst.dev	= net->loopback_dev;
-	dev_hold(rth->dst.dev);
+	rth->rt_oif	= 0;
+	rth->rt_mark    = skb->mark;
 	rth->rt_gateway	= daddr;
 	rth->rt_spec_dst= spec_dst;
-	rth->dst.input= ip_local_deliver;
-	rth->rt_flags 	= flags|RTCF_LOCAL;
+	rth->rt_peer_genid = 0;
+	rth->peer = NULL;
+	rth->fi = NULL;
 	if (res.type == RTN_UNREACHABLE) {
 		rth->dst.input= ip_error;
 		rth->dst.error= -err;
 		rth->rt_flags 	&= ~RTCF_LOCAL;
 	}
-	rth->rt_type	= res.type;
 	hash = rt_hash(daddr, saddr, fl4.flowi4_iif, rt_genid(net));
 	rth = rt_intern_hash(hash, rth, skb, fl4.flowi4_iif);
 	err = 0;
@@ -2285,7 +2275,7 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 		     ((__force u32)rth->rt_key_src ^ (__force u32)saddr) |
 		     (rth->rt_iif ^ iif) |
 		     rth->rt_oif |
-		     (rth->rt_tos ^ tos)) == 0 &&
+		     (rth->rt_key_tos ^ tos)) == 0 &&
 		    rth->rt_mark == skb->mark &&
 		    net_eq(dev_net(rth->dst.dev), net) &&
 		    !rt_is_expired(rth)) {
@@ -2346,12 +2336,12 @@ EXPORT_SYMBOL(ip_route_input_common);
 /* called with rcu_read_lock() */
 static struct rtable *__mkroute_output(const struct fib_result *res,
 				       const struct flowi4 *fl4,
-				       const struct flowi4 *oldflp4,
-				       struct net_device *dev_out,
+				       __be32 orig_daddr, __be32 orig_saddr,
+				       int orig_oif, struct net_device *dev_out,
 				       unsigned int flags)
 {
 	struct fib_info *fi = res->fi;
-	u32 tos = RT_FL_TOS(oldflp4);
+	u32 tos = RT_FL_TOS(fl4);
 	struct in_device *in_dev;
 	u16 type = res->type;
 	struct rtable *rth;
@@ -2378,8 +2368,8 @@ static struct rtable *__mkroute_output(const struct fib_result *res,
 		fi = NULL;
 	} else if (type == RTN_MULTICAST) {
 		flags |= RTCF_MULTICAST | RTCF_LOCAL;
-		if (!ip_check_mc_rcu(in_dev, oldflp4->daddr, oldflp4->saddr,
-				     oldflp4->flowi4_proto))
+		if (!ip_check_mc_rcu(in_dev, fl4->daddr, fl4->saddr,
+				     fl4->flowi4_proto))
 			flags &= ~RTCF_LOCAL;
 		/* If multicast route do not exist use
 		 * default one, but do not gateway in this case.
@@ -2389,28 +2379,31 @@ static struct rtable *__mkroute_output(const struct fib_result *res,
 			fi = NULL;
 	}
 
-	rth = rt_dst_alloc(IN_DEV_CONF_GET(in_dev, NOPOLICY),
+	rth = rt_dst_alloc(dev_out,
+			   IN_DEV_CONF_GET(in_dev, NOPOLICY),
 			   IN_DEV_CONF_GET(in_dev, NOXFRM));
 	if (!rth)
 		return ERR_PTR(-ENOBUFS);
 
-	rth->rt_key_dst	= oldflp4->daddr;
-	rth->rt_tos	= tos;
-	rth->rt_key_src	= oldflp4->saddr;
-	rth->rt_oif	= oldflp4->flowi4_oif;
-	rth->rt_mark    = oldflp4->flowi4_mark;
+	rth->dst.output = ip_output;
+
+	rth->rt_key_dst	= orig_daddr;
+	rth->rt_key_src	= orig_saddr;
+	rth->rt_genid = rt_genid(dev_net(dev_out));
+	rth->rt_flags	= flags;
+	rth->rt_type	= type;
+	rth->rt_key_tos	= tos;
 	rth->rt_dst	= fl4->daddr;
 	rth->rt_src	= fl4->saddr;
-	rth->rt_iif	= 0;
-	/* get references to the devices that are to be hold by the routing
-	   cache entry */
-	rth->dst.dev	= dev_out;
-	dev_hold(dev_out);
+	rth->rt_route_iif = 0;
+	rth->rt_iif	= orig_oif ? : dev_out->ifindex;
+	rth->rt_oif	= orig_oif;
+	rth->rt_mark    = fl4->flowi4_mark;
 	rth->rt_gateway = fl4->daddr;
 	rth->rt_spec_dst= fl4->saddr;
-
-	rth->dst.output=ip_output;
-	rth->rt_genid = rt_genid(dev_net(dev_out));
+	rth->rt_peer_genid = 0;
+	rth->peer = NULL;
+	rth->fi = NULL;
 
 	RT_CACHE_STAT_INC(out_slow_tot);
 
@@ -2428,7 +2421,7 @@ static struct rtable *__mkroute_output(const struct fib_result *res,
 #ifdef CONFIG_IP_MROUTE
 		if (type == RTN_MULTICAST) {
 			if (IN_DEV_MFORWARD(in_dev) &&
-			    !ipv4_is_local_multicast(oldflp4->daddr)) {
+			    !ipv4_is_local_multicast(fl4->daddr)) {
 				rth->dst.input = ip_mr_input;
 				rth->dst.output = ip_mc_output;
 			}
@@ -2436,9 +2429,8 @@ static struct rtable *__mkroute_output(const struct fib_result *res,
 #endif
 	}
 
-	rt_set_nexthop(rth, oldflp4, res, fi, type, 0);
+	rt_set_nexthop(rth, fl4, res, fi, type, 0);
 
-	rth->rt_flags = flags;
 	return rth;
 }
 
@@ -2447,36 +2439,37 @@ static struct rtable *__mkroute_output(const struct fib_result *res,
  * called with rcu_read_lock();
  */
 
-static struct rtable *ip_route_output_slow(struct net *net,
-					   const struct flowi4 *oldflp4)
+static struct rtable *ip_route_output_slow(struct net *net, struct flowi4 *fl4)
 {
-	u32 tos	= RT_FL_TOS(oldflp4);
-	struct flowi4 fl4;
-	struct fib_result res;
-	unsigned int flags = 0;
 	struct net_device *dev_out = NULL;
+	u32 tos	= RT_FL_TOS(fl4);
+	unsigned int flags = 0;
+	struct fib_result res;
 	struct rtable *rth;
+	__be32 orig_daddr;
+	__be32 orig_saddr;
+	int orig_oif;
 
 	res.fi		= NULL;
 #ifdef CONFIG_IP_MULTIPLE_TABLES
 	res.r		= NULL;
 #endif
 
-	fl4.flowi4_oif = oldflp4->flowi4_oif;
-	fl4.flowi4_iif = net->loopback_dev->ifindex;
-	fl4.flowi4_mark = oldflp4->flowi4_mark;
-	fl4.daddr = oldflp4->daddr;
-	fl4.saddr = oldflp4->saddr;
-	fl4.flowi4_tos = tos & IPTOS_RT_MASK;
-	fl4.flowi4_scope = ((tos & RTO_ONLINK) ?
-			RT_SCOPE_LINK : RT_SCOPE_UNIVERSE);
+	orig_daddr = fl4->daddr;
+	orig_saddr = fl4->saddr;
+	orig_oif = fl4->flowi4_oif;
+
+	fl4->flowi4_iif = net->loopback_dev->ifindex;
+	fl4->flowi4_tos = tos & IPTOS_RT_MASK;
+	fl4->flowi4_scope = ((tos & RTO_ONLINK) ?
+			 RT_SCOPE_LINK : RT_SCOPE_UNIVERSE);
 
 	rcu_read_lock();
-	if (oldflp4->saddr) {
+	if (fl4->saddr) {
 		rth = ERR_PTR(-EINVAL);
-		if (ipv4_is_multicast(oldflp4->saddr) ||
-		    ipv4_is_lbcast(oldflp4->saddr) ||
-		    ipv4_is_zeronet(oldflp4->saddr))
+		if (ipv4_is_multicast(fl4->saddr) ||
+		    ipv4_is_lbcast(fl4->saddr) ||
+		    ipv4_is_zeronet(fl4->saddr))
 			goto out;
 
 		/* I removed check for oif == dev_out->oif here.
@@ -2487,11 +2480,11 @@ static struct rtable *ip_route_output_slow(struct net *net,
 		      of another iface. --ANK
 		 */
 
-		if (oldflp4->flowi4_oif == 0 &&
-		    (ipv4_is_multicast(oldflp4->daddr) ||
-		     ipv4_is_lbcast(oldflp4->daddr))) {
+		if (fl4->flowi4_oif == 0 &&
+		    (ipv4_is_multicast(fl4->daddr) ||
+		     ipv4_is_lbcast(fl4->daddr))) {
 			/* It is equivalent to inet_addr_type(saddr) == RTN_LOCAL */
-			dev_out = __ip_dev_find(net, oldflp4->saddr, false);
+			dev_out = __ip_dev_find(net, fl4->saddr, false);
 			if (dev_out == NULL)
 				goto out;
 
@@ -2510,20 +2503,20 @@ static struct rtable *ip_route_output_slow(struct net *net,
 			   Luckily, this hack is good workaround.
 			 */
 
-			fl4.flowi4_oif = dev_out->ifindex;
+			fl4->flowi4_oif = dev_out->ifindex;
 			goto make_route;
 		}
 
-		if (!(oldflp4->flowi4_flags & FLOWI_FLAG_ANYSRC)) {
+		if (!(fl4->flowi4_flags & FLOWI_FLAG_ANYSRC)) {
 			/* It is equivalent to inet_addr_type(saddr) == RTN_LOCAL */
-			if (!__ip_dev_find(net, oldflp4->saddr, false))
+			if (!__ip_dev_find(net, fl4->saddr, false))
 				goto out;
 		}
 	}
 
 
-	if (oldflp4->flowi4_oif) {
-		dev_out = dev_get_by_index_rcu(net, oldflp4->flowi4_oif);
+	if (fl4->flowi4_oif) {
+		dev_out = dev_get_by_index_rcu(net, fl4->flowi4_oif);
 		rth = ERR_PTR(-ENODEV);
 		if (dev_out == NULL)
 			goto out;
@@ -2533,37 +2526,37 @@ static struct rtable *ip_route_output_slow(struct net *net,
 			rth = ERR_PTR(-ENETUNREACH);
 			goto out;
 		}
-		if (ipv4_is_local_multicast(oldflp4->daddr) ||
-		    ipv4_is_lbcast(oldflp4->daddr)) {
-			if (!fl4.saddr)
-				fl4.saddr = inet_select_addr(dev_out, 0,
-							     RT_SCOPE_LINK);
+		if (ipv4_is_local_multicast(fl4->daddr) ||
+		    ipv4_is_lbcast(fl4->daddr)) {
+			if (!fl4->saddr)
+				fl4->saddr = inet_select_addr(dev_out, 0,
+							      RT_SCOPE_LINK);
 			goto make_route;
 		}
-		if (!fl4.saddr) {
-			if (ipv4_is_multicast(oldflp4->daddr))
-				fl4.saddr = inet_select_addr(dev_out, 0,
-							     fl4.flowi4_scope);
-			else if (!oldflp4->daddr)
-				fl4.saddr = inet_select_addr(dev_out, 0,
-							     RT_SCOPE_HOST);
+		if (fl4->saddr) {
+			if (ipv4_is_multicast(fl4->daddr))
+				fl4->saddr = inet_select_addr(dev_out, 0,
+							      fl4->flowi4_scope);
+			else if (!fl4->daddr)
+				fl4->saddr = inet_select_addr(dev_out, 0,
+							      RT_SCOPE_HOST);
 		}
 	}
 
-	if (!fl4.daddr) {
-		fl4.daddr = fl4.saddr;
-		if (!fl4.daddr)
-			fl4.daddr = fl4.saddr = htonl(INADDR_LOOPBACK);
+	if (!fl4->daddr) {
+		fl4->daddr = fl4->saddr;
+		if (!fl4->daddr)
+			fl4->daddr = fl4->saddr = htonl(INADDR_LOOPBACK);
 		dev_out = net->loopback_dev;
-		fl4.flowi4_oif = net->loopback_dev->ifindex;
+		fl4->flowi4_oif = net->loopback_dev->ifindex;
 		res.type = RTN_LOCAL;
 		flags |= RTCF_LOCAL;
 		goto make_route;
 	}
 
-	if (fib_lookup(net, &fl4, &res)) {
+	if (fib_lookup(net, fl4, &res)) {
 		res.fi = NULL;
-		if (oldflp4->flowi4_oif) {
+		if (fl4->flowi4_oif) {
 			/* Apparently, routing tables are wrong. Assume,
 			   that the destination is on link.
 
@@ -2582,9 +2575,9 @@ static struct rtable *ip_route_output_slow(struct net *net,
 			   likely IPv6, but we do not.
 			 */
 
-			if (fl4.saddr == 0)
-				fl4.saddr = inet_select_addr(dev_out, 0,
-							     RT_SCOPE_LINK);
+			if (fl4->saddr == 0)
+				fl4->saddr = inet_select_addr(dev_out, 0,
+							      RT_SCOPE_LINK);
 			res.type = RTN_UNICAST;
 			goto make_route;
 		}
@@ -2593,42 +2586,45 @@ static struct rtable *ip_route_output_slow(struct net *net,
 	}
 
 	if (res.type == RTN_LOCAL) {
-		if (!fl4.saddr) {
+		if (!fl4->saddr) {
 			if (res.fi->fib_prefsrc)
-				fl4.saddr = res.fi->fib_prefsrc;
+				fl4->saddr = res.fi->fib_prefsrc;
 			else
-				fl4.saddr = fl4.daddr;
+				fl4->saddr = fl4->daddr;
 		}
 		dev_out = net->loopback_dev;
-		fl4.flowi4_oif = dev_out->ifindex;
+		fl4->flowi4_oif = dev_out->ifindex;
 		res.fi = NULL;
 		flags |= RTCF_LOCAL;
 		goto make_route;
 	}
 
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
-	if (res.fi->fib_nhs > 1 && fl4.flowi4_oif == 0)
+	if (res.fi->fib_nhs > 1 && fl4->flowi4_oif == 0)
 		fib_select_multipath(&res);
 	else
 #endif
-	if (!res.prefixlen && res.type == RTN_UNICAST && !fl4.flowi4_oif)
+	if (!res.prefixlen &&
+	    res.table->tb_num_default > 1 &&
+	    res.type == RTN_UNICAST && !fl4->flowi4_oif)
 		fib_select_default(&res);
 
-	if (!fl4.saddr)
-		fl4.saddr = FIB_RES_PREFSRC(net, res);
+	if (!fl4->saddr)
+		fl4->saddr = FIB_RES_PREFSRC(net, res);
 
 	dev_out = FIB_RES_DEV(res);
-	fl4.flowi4_oif = dev_out->ifindex;
+	fl4->flowi4_oif = dev_out->ifindex;
 
 
 make_route:
-	rth = __mkroute_output(&res, &fl4, oldflp4, dev_out, flags);
+	rth = __mkroute_output(&res, fl4, orig_daddr, orig_saddr, orig_oif,
+			       dev_out, flags);
 	if (!IS_ERR(rth)) {
 		unsigned int hash;
 
-		hash = rt_hash(oldflp4->daddr, oldflp4->saddr, oldflp4->flowi4_oif,
+		hash = rt_hash(orig_daddr, orig_saddr, orig_oif,
 			       rt_genid(dev_net(dev_out)));
-		rth = rt_intern_hash(hash, rth, NULL, oldflp4->flowi4_oif);
+		rth = rt_intern_hash(hash, rth, NULL, orig_oif);
 	}
 
 out:
@@ -2636,7 +2632,7 @@ out:
 	return rth;
 }
 
-struct rtable *__ip_route_output_key(struct net *net, const struct flowi4 *flp4)
+struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *flp4)
 {
 	struct rtable *rth;
 	unsigned int hash;
@@ -2654,13 +2650,17 @@ struct rtable *__ip_route_output_key(struct net *net, const struct flowi4 *flp4)
 		    rt_is_output_route(rth) &&
 		    rth->rt_oif == flp4->flowi4_oif &&
 		    rth->rt_mark == flp4->flowi4_mark &&
-		    !((rth->rt_tos ^ flp4->flowi4_tos) &
+		    !((rth->rt_key_tos ^ flp4->flowi4_tos) &
 			    (IPTOS_RT_MASK | RTO_ONLINK)) &&
 		    net_eq(dev_net(rth->dst.dev), net) &&
 		    !rt_is_expired(rth)) {
 			dst_use(&rth->dst, jiffies);
 			RT_CACHE_STAT_INC(out_hit);
 			rcu_read_unlock_bh();
+			if (!flp4->saddr)
+				flp4->saddr = rth->rt_src;
+			if (!flp4->daddr)
+				flp4->daddr = rth->rt_dst;
 			return rth;
 		}
 		RT_CACHE_STAT_INC(out_hlist_search);
@@ -2686,6 +2686,12 @@ static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu)
 {
 }
 
+static u32 *ipv4_rt_blackhole_cow_metrics(struct dst_entry *dst,
+					  unsigned long old)
+{
+	return NULL;
+}
+
 static struct dst_ops ipv4_dst_blackhole_ops = {
 	.family			=	AF_INET,
 	.protocol		=	cpu_to_be16(ETH_P_IP),
@@ -2694,11 +2700,12 @@ static struct dst_ops ipv4_dst_blackhole_ops = {
 	.default_mtu		=	ipv4_blackhole_default_mtu,
 	.default_advmss		=	ipv4_default_advmss,
 	.update_pmtu		=	ipv4_rt_blackhole_update_pmtu,
+	.cow_metrics		=	ipv4_rt_blackhole_cow_metrics,
 };
 
 struct dst_entry *ipv4_blackhole_route(struct net *net, struct dst_entry *dst_orig)
 {
-	struct rtable *rt = dst_alloc(&ipv4_dst_blackhole_ops, 1);
+	struct rtable *rt = dst_alloc(&ipv4_dst_blackhole_ops, NULL, 1, 0, 0);
 	struct rtable *ort = (struct rtable *) dst_orig;
 
 	if (rt) {
@@ -2715,7 +2722,8 @@ struct dst_entry *ipv4_blackhole_route(struct net *net, struct dst_entry *dst_or
 
 		rt->rt_key_dst = ort->rt_key_dst;
 		rt->rt_key_src = ort->rt_key_src;
-		rt->rt_tos = ort->rt_tos;
+		rt->rt_key_tos = ort->rt_key_tos;
+		rt->rt_route_iif = ort->rt_route_iif;
 		rt->rt_iif = ort->rt_iif;
 		rt->rt_oif = ort->rt_oif;
 		rt->rt_mark = ort->rt_mark;
@@ -2725,7 +2733,6 @@ struct dst_entry *ipv4_blackhole_route(struct net *net, struct dst_entry *dst_or
 		rt->rt_type = ort->rt_type;
 		rt->rt_dst = ort->rt_dst;
 		rt->rt_src = ort->rt_src;
-		rt->rt_iif = ort->rt_iif;
 		rt->rt_gateway = ort->rt_gateway;
 		rt->rt_spec_dst = ort->rt_spec_dst;
 		rt->peer = ort->peer;
@@ -2751,15 +2758,10 @@ struct rtable *ip_route_output_flow(struct net *net, struct flowi4 *flp4,
 	if (IS_ERR(rt))
 		return rt;
 
-	if (flp4->flowi4_proto) {
-		if (!flp4->saddr)
-			flp4->saddr = rt->rt_src;
-		if (!flp4->daddr)
-			flp4->daddr = rt->rt_dst;
+	if (flp4->flowi4_proto)
 		rt = (struct rtable *) xfrm_lookup(net, &rt->dst,
 						   flowi4_to_flowi(flp4),
 						   sk, 0);
-	}
 
 	return rt;
 }
@@ -2783,7 +2785,7 @@ static int rt_fill_info(struct net *net,
 	r->rtm_family	 = AF_INET;
 	r->rtm_dst_len	= 32;
 	r->rtm_src_len	= 0;
-	r->rtm_tos	= rt->rt_tos;
+	r->rtm_tos	= rt->rt_key_tos;
 	r->rtm_table	= RT_TABLE_MAIN;
 	NLA_PUT_U32(skb, RTA_TABLE, RT_TABLE_MAIN);
 	r->rtm_type	= rt->rt_type;
@@ -2837,7 +2839,9 @@ static int rt_fill_info(struct net *net,
 
 		if (ipv4_is_multicast(dst) && !ipv4_is_local_multicast(dst) &&
 		    IPV4_DEVCONF_ALL(net, MC_FORWARDING)) {
-			int err = ipmr_get_route(net, skb, r, nowait);
+			int err = ipmr_get_route(net, skb,
+						 rt->rt_src, rt->rt_dst,
+						 r, nowait);
 			if (err <= 0) {
 				if (!nowait) {
 					if (err == 0)
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 8b44c6d2a79..26461492a84 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -321,10 +321,10 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
 	 * the ACK carries the same options again (see RFC1122 4.2.3.8)
 	 */
 	if (opt && opt->optlen) {
-		int opt_size = sizeof(struct ip_options) + opt->optlen;
+		int opt_size = sizeof(struct ip_options_rcu) + opt->optlen;
 
 		ireq->opt = kmalloc(opt_size, GFP_ATOMIC);
-		if (ireq->opt != NULL && ip_options_echo(ireq->opt, skb)) {
+		if (ireq->opt != NULL && ip_options_echo(&ireq->opt->opt, skb)) {
 			kfree(ireq->opt);
 			ireq->opt = NULL;
 		}
@@ -345,17 +345,13 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
 	 * no easy way to do this.
 	 */
 	{
-		struct flowi4 fl4 = {
-			.flowi4_mark = sk->sk_mark,
-			.daddr = ((opt && opt->srr) ?
-				  opt->faddr : ireq->rmt_addr),
-			.saddr = ireq->loc_addr,
-			.flowi4_tos = RT_CONN_FLAGS(sk),
-			.flowi4_proto = IPPROTO_TCP,
-			.flowi4_flags = inet_sk_flowi_flags(sk),
-			.fl4_sport = th->dest,
-			.fl4_dport = th->source,
-		};
+		struct flowi4 fl4;
+
+		flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk),
+				   RT_SCOPE_UNIVERSE, IPPROTO_TCP,
+				   inet_sk_flowi_flags(sk),
+				   (opt && opt->srr) ? opt->faddr : ireq->rmt_addr,
+				   ireq->loc_addr, th->source, th->dest);
 		security_req_classify_flow(req, flowi4_to_flowi(&fl4));
 		rt = ip_route_output_key(sock_net(sk), &fl4);
 		if (IS_ERR(rt)) {
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 1a456652086..57d0752e239 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -13,6 +13,7 @@
 #include <linux/seqlock.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/nsproxy.h>
 #include <net/snmp.h>
 #include <net/icmp.h>
 #include <net/ip.h>
@@ -21,6 +22,7 @@
 #include <net/udp.h>
 #include <net/cipso_ipv4.h>
 #include <net/inet_frag.h>
+#include <net/ping.h>
 
 static int zero;
 static int tcp_retr1_max = 255;
@@ -30,6 +32,8 @@ static int tcp_adv_win_scale_min = -31;
 static int tcp_adv_win_scale_max = 31;
 static int ip_ttl_min = 1;
 static int ip_ttl_max = 255;
+static int ip_ping_group_range_min[] = { 0, 0 };
+static int ip_ping_group_range_max[] = { GID_T_MAX, GID_T_MAX };
 
 /* Update system visible IP port range */
 static void set_local_port_range(int range[2])
@@ -68,6 +72,53 @@ static int ipv4_local_port_range(ctl_table *table, int write,
 	return ret;
 }
 
+
+void inet_get_ping_group_range_table(struct ctl_table *table, gid_t *low, gid_t *high)
+{
+	gid_t *data = table->data;
+	unsigned seq;
+	do {
+		seq = read_seqbegin(&sysctl_local_ports.lock);
+
+		*low = data[0];
+		*high = data[1];
+	} while (read_seqretry(&sysctl_local_ports.lock, seq));
+}
+
+/* Update system visible IP port range */
+static void set_ping_group_range(struct ctl_table *table, int range[2])
+{
+	gid_t *data = table->data;
+	write_seqlock(&sysctl_local_ports.lock);
+	data[0] = range[0];
+	data[1] = range[1];
+	write_sequnlock(&sysctl_local_ports.lock);
+}
+
+/* Validate changes from /proc interface. */
+static int ipv4_ping_group_range(ctl_table *table, int write,
+				 void __user *buffer,
+				 size_t *lenp, loff_t *ppos)
+{
+	int ret;
+	gid_t range[2];
+	ctl_table tmp = {
+		.data = &range,
+		.maxlen = sizeof(range),
+		.mode = table->mode,
+		.extra1 = &ip_ping_group_range_min,
+		.extra2 = &ip_ping_group_range_max,
+	};
+
+	inet_get_ping_group_range_table(table, range, range + 1);
+	ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
+
+	if (write && ret == 0)
+		set_ping_group_range(table, range);
+
+	return ret;
+}
+
 static int proc_tcp_congestion_control(ctl_table *ctl, int write,
 				       void __user *buffer, size_t *lenp, loff_t *ppos)
 {
@@ -311,7 +362,6 @@ static struct ctl_table ipv4_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_do_large_bitmap,
 	},
-#ifdef CONFIG_IP_MULTICAST
 	{
 		.procname	= "igmp_max_memberships",
 		.data		= &sysctl_igmp_max_memberships,
@@ -319,8 +369,6 @@ static struct ctl_table ipv4_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-
-#endif
 	{
 		.procname	= "igmp_max_msf",
 		.data		= &sysctl_igmp_max_msf,
@@ -680,6 +728,13 @@ static struct ctl_table ipv4_net_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
+	{
+		.procname	= "ping_group_range",
+		.data		= &init_net.ipv4.sysctl_ping_group_range,
+		.maxlen		= sizeof(init_net.ipv4.sysctl_ping_group_range),
+		.mode		= 0644,
+		.proc_handler	= ipv4_ping_group_range,
+	},
 	{ }
 };
 
@@ -714,8 +769,18 @@ static __net_init int ipv4_sysctl_init_net(struct net *net)
 			&net->ipv4.sysctl_icmp_ratemask;
 		table[6].data =
 			&net->ipv4.sysctl_rt_cache_rebuild_count;
+		table[7].data =
+			&net->ipv4.sysctl_ping_group_range;
+
 	}
 
+	/*
+	 * Sane defaults - nobody may create ping sockets.
+	 * Boot scripts should set this to distro-specific group.
+	 */
+	net->ipv4.sysctl_ping_group_range[0] = 1;
+	net->ipv4.sysctl_ping_group_range[1] = 0;
+
 	net->ipv4.sysctl_rt_cache_rebuild_count = 4;
 
 	net->ipv4.ipv4_hdr = register_net_sysctl_table(net,
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index b22d4501054..054a59d21eb 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -999,7 +999,8 @@ new_segment:
 				/* We have some space in skb head. Superb! */
 				if (copy > skb_tailroom(skb))
 					copy = skb_tailroom(skb);
-				if ((err = skb_add_data(skb, from, copy)) != 0)
+				err = skb_add_data_nocache(sk, skb, from, copy);
+				if (err)
 					goto do_fault;
 			} else {
 				int merge = 0;
@@ -1042,8 +1043,8 @@ new_segment:
 
 				/* Time to copy data. We are close to
 				 * the end! */
-				err = skb_copy_to_page(sk, from, skb, page,
-						       off, copy);
+				err = skb_copy_to_page_nocache(sk, from, skb,
+							       page, off, copy);
 				if (err) {
 					/* If this page was new, give it to the
 					 * socket so it does not get leaked.
diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
index 34340c9c95f..f376b05cca8 100644
--- a/net/ipv4/tcp_cubic.c
+++ b/net/ipv4/tcp_cubic.c
@@ -93,6 +93,7 @@ struct bictcp {
 	u32	ack_cnt;	/* number of acks */
 	u32	tcp_cwnd;	/* estimated tcp cwnd */
 #define ACK_RATIO_SHIFT	4
+#define ACK_RATIO_LIMIT (32u << ACK_RATIO_SHIFT)
 	u16	delayed_ack;	/* estimate the ratio of Packets/ACKs << 4 */
 	u8	sample_cnt;	/* number of samples to decide curr_rtt */
 	u8	found;		/* the exit point is found? */
@@ -398,8 +399,12 @@ static void bictcp_acked(struct sock *sk, u32 cnt, s32 rtt_us)
 	u32 delay;
 
 	if (icsk->icsk_ca_state == TCP_CA_Open) {
-		cnt -= ca->delayed_ack >> ACK_RATIO_SHIFT;
-		ca->delayed_ack += cnt;
+		u32 ratio = ca->delayed_ack;
+
+		ratio -= ca->delayed_ack >> ACK_RATIO_SHIFT;
+		ratio += cnt;
+
+		ca->delayed_ack = min(ratio, ACK_RATIO_LIMIT);
 	}
 
 	/* Some calls are for duplicates without timetamps */
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index f7e6c2c2d2b..3c8d9b6f1ea 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -146,13 +146,15 @@ EXPORT_SYMBOL_GPL(tcp_twsk_unique);
 /* This will initiate an outgoing connection. */
 int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {
+	struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
 	struct inet_sock *inet = inet_sk(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
-	struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
 	__be16 orig_sport, orig_dport;
-	struct rtable *rt;
 	__be32 daddr, nexthop;
+	struct flowi4 *fl4;
+	struct rtable *rt;
 	int err;
+	struct ip_options_rcu *inet_opt;
 
 	if (addr_len < sizeof(struct sockaddr_in))
 		return -EINVAL;
@@ -161,15 +163,18 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 		return -EAFNOSUPPORT;
 
 	nexthop = daddr = usin->sin_addr.s_addr;
-	if (inet->opt && inet->opt->srr) {
+	inet_opt = rcu_dereference_protected(inet->inet_opt,
+					     sock_owned_by_user(sk));
+	if (inet_opt && inet_opt->opt.srr) {
 		if (!daddr)
 			return -EINVAL;
-		nexthop = inet->opt->faddr;
+		nexthop = inet_opt->opt.faddr;
 	}
 
 	orig_sport = inet->inet_sport;
 	orig_dport = usin->sin_port;
-	rt = ip_route_connect(nexthop, inet->inet_saddr,
+	fl4 = &inet->cork.fl.u.ip4;
+	rt = ip_route_connect(fl4, nexthop, inet->inet_saddr,
 			      RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
 			      IPPROTO_TCP,
 			      orig_sport, orig_dport, sk, true);
@@ -185,11 +190,11 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 		return -ENETUNREACH;
 	}
 
-	if (!inet->opt || !inet->opt->srr)
-		daddr = rt->rt_dst;
+	if (!inet_opt || !inet_opt->opt.srr)
+		daddr = fl4->daddr;
 
 	if (!inet->inet_saddr)
-		inet->inet_saddr = rt->rt_src;
+		inet->inet_saddr = fl4->saddr;
 	inet->inet_rcv_saddr = inet->inet_saddr;
 
 	if (tp->rx_opt.ts_recent_stamp && inet->inet_daddr != daddr) {
@@ -200,8 +205,8 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 	}
 
 	if (tcp_death_row.sysctl_tw_recycle &&
-	    !tp->rx_opt.ts_recent_stamp && rt->rt_dst == daddr) {
-		struct inet_peer *peer = rt_get_peer(rt);
+	    !tp->rx_opt.ts_recent_stamp && fl4->daddr == daddr) {
+		struct inet_peer *peer = rt_get_peer(rt, fl4->daddr);
 		/*
 		 * VJ's idea. We save last timestamp seen from
 		 * the destination in peer table, when entering state
@@ -221,8 +226,8 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 	inet->inet_daddr = daddr;
 
 	inet_csk(sk)->icsk_ext_hdr_len = 0;
-	if (inet->opt)
-		inet_csk(sk)->icsk_ext_hdr_len = inet->opt->optlen;
+	if (inet_opt)
+		inet_csk(sk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
 
 	tp->rx_opt.mss_clamp = TCP_MSS_DEFAULT;
 
@@ -236,8 +241,7 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 	if (err)
 		goto failure;
 
-	rt = ip_route_newports(rt, IPPROTO_TCP,
-			       orig_sport, orig_dport,
+	rt = ip_route_newports(fl4, rt, orig_sport, orig_dport,
 			       inet->inet_sport, inet->inet_dport, sk);
 	if (IS_ERR(rt)) {
 		err = PTR_ERR(rt);
@@ -279,7 +283,7 @@ EXPORT_SYMBOL(tcp_v4_connect);
 /*
  * This routine does path mtu discovery as defined in RFC1191.
  */
-static void do_pmtu_discovery(struct sock *sk, struct iphdr *iph, u32 mtu)
+static void do_pmtu_discovery(struct sock *sk, const struct iphdr *iph, u32 mtu)
 {
 	struct dst_entry *dst;
 	struct inet_sock *inet = inet_sk(sk);
@@ -341,7 +345,7 @@ static void do_pmtu_discovery(struct sock *sk, struct iphdr *iph, u32 mtu)
 
 void tcp_v4_err(struct sk_buff *icmp_skb, u32 info)
 {
-	struct iphdr *iph = (struct iphdr *)icmp_skb->data;
+	const struct iphdr *iph = (const struct iphdr *)icmp_skb->data;
 	struct tcphdr *th = (struct tcphdr *)(icmp_skb->data + (iph->ihl << 2));
 	struct inet_connection_sock *icsk;
 	struct tcp_sock *tp;
@@ -647,7 +651,7 @@ static void tcp_v4_send_reset(struct sock *sk, struct sk_buff *skb)
 	arg.flags = (sk && inet_sk(sk)->transparent) ? IP_REPLY_ARG_NOSRCCHECK : 0;
 
 	net = dev_net(skb_dst(skb)->dev);
-	ip_send_reply(net->ipv4.tcp_sock, skb,
+	ip_send_reply(net->ipv4.tcp_sock, skb, ip_hdr(skb)->saddr,
 		      &arg, arg.iov[0].iov_len);
 
 	TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS);
@@ -722,7 +726,7 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack,
 	if (oif)
 		arg.bound_dev_if = oif;
 
-	ip_send_reply(net->ipv4.tcp_sock, skb,
+	ip_send_reply(net->ipv4.tcp_sock, skb, ip_hdr(skb)->saddr,
 		      &arg, arg.iov[0].iov_len);
 
 	TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS);
@@ -765,11 +769,12 @@ static int tcp_v4_send_synack(struct sock *sk, struct dst_entry *dst,
 			      struct request_values *rvp)
 {
 	const struct inet_request_sock *ireq = inet_rsk(req);
+	struct flowi4 fl4;
 	int err = -1;
 	struct sk_buff * skb;
 
 	/* First, grab a route. */
-	if (!dst && (dst = inet_csk_route_req(sk, req)) == NULL)
+	if (!dst && (dst = inet_csk_route_req(sk, &fl4, req)) == NULL)
 		return -1;
 
 	skb = tcp_make_synack(sk, dst, req, rvp);
@@ -820,17 +825,18 @@ static void syn_flood_warning(const struct sk_buff *skb)
 /*
  * Save and compile IPv4 options into the request_sock if needed.
  */
-static struct ip_options *tcp_v4_save_options(struct sock *sk,
-					      struct sk_buff *skb)
+static struct ip_options_rcu *tcp_v4_save_options(struct sock *sk,
+						  struct sk_buff *skb)
 {
-	struct ip_options *opt = &(IPCB(skb)->opt);
-	struct ip_options *dopt = NULL;
+	const struct ip_options *opt = &(IPCB(skb)->opt);
+	struct ip_options_rcu *dopt = NULL;
 
 	if (opt && opt->optlen) {
-		int opt_size = optlength(opt);
+		int opt_size = sizeof(*dopt) + opt->optlen;
+
 		dopt = kmalloc(opt_size, GFP_ATOMIC);
 		if (dopt) {
-			if (ip_options_echo(dopt, skb)) {
+			if (ip_options_echo(&dopt->opt, skb)) {
 				kfree(dopt);
 				dopt = NULL;
 			}
@@ -1333,6 +1339,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 		req->cookie_ts = tmp_opt.tstamp_ok;
 	} else if (!isn) {
 		struct inet_peer *peer = NULL;
+		struct flowi4 fl4;
 
 		/* VJ's idea. We save last timestamp seen
 		 * from the destination in peer table, when entering
@@ -1345,9 +1352,9 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 		 */
 		if (tmp_opt.saw_tstamp &&
 		    tcp_death_row.sysctl_tw_recycle &&
-		    (dst = inet_csk_route_req(sk, req)) != NULL &&
-		    (peer = rt_get_peer((struct rtable *)dst)) != NULL &&
-		    peer->daddr.addr.a4 == saddr) {
+		    (dst = inet_csk_route_req(sk, &fl4, req)) != NULL &&
+		    fl4.daddr == saddr &&
+		    (peer = rt_get_peer((struct rtable *)dst, fl4.daddr)) != NULL) {
 			inet_peer_refcheck(peer);
 			if ((u32)get_seconds() - peer->tcp_ts_stamp < TCP_PAWS_MSL &&
 			    (s32)(peer->tcp_ts - req->ts_recent) >
@@ -1411,19 +1418,16 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 #ifdef CONFIG_TCP_MD5SIG
 	struct tcp_md5sig_key *key;
 #endif
+	struct ip_options_rcu *inet_opt;
 
 	if (sk_acceptq_is_full(sk))
 		goto exit_overflow;
 
-	if (!dst && (dst = inet_csk_route_req(sk, req)) == NULL)
-		goto exit;
-
 	newsk = tcp_create_openreq_child(sk, req, skb);
 	if (!newsk)
 		goto exit_nonewsk;
 
 	newsk->sk_gso_type = SKB_GSO_TCPV4;
-	sk_setup_caps(newsk, dst);
 
 	newtp		      = tcp_sk(newsk);
 	newinet		      = inet_sk(newsk);
@@ -1431,15 +1435,21 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 	newinet->inet_daddr   = ireq->rmt_addr;
 	newinet->inet_rcv_saddr = ireq->loc_addr;
 	newinet->inet_saddr	      = ireq->loc_addr;
-	newinet->opt	      = ireq->opt;
+	inet_opt	      = ireq->opt;
+	rcu_assign_pointer(newinet->inet_opt, inet_opt);
 	ireq->opt	      = NULL;
 	newinet->mc_index     = inet_iif(skb);
 	newinet->mc_ttl	      = ip_hdr(skb)->ttl;
 	inet_csk(newsk)->icsk_ext_hdr_len = 0;
-	if (newinet->opt)
-		inet_csk(newsk)->icsk_ext_hdr_len = newinet->opt->optlen;
+	if (inet_opt)
+		inet_csk(newsk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
 	newinet->inet_id = newtp->write_seq ^ jiffies;
 
+	if (!dst && (dst = inet_csk_route_child_sock(sk, newsk, req)) == NULL)
+		goto put_and_exit;
+
+	sk_setup_caps(newsk, dst);
+
 	tcp_mtup_init(newsk);
 	tcp_sync_mss(newsk, dst_mtu(dst));
 	newtp->advmss = dst_metric_advmss(dst);
@@ -1467,10 +1477,8 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 	}
 #endif
 
-	if (__inet_inherit_port(sk, newsk) < 0) {
-		sock_put(newsk);
-		goto exit;
-	}
+	if (__inet_inherit_port(sk, newsk) < 0)
+		goto put_and_exit;
 	__inet_hash_nolisten(newsk, NULL);
 
 	return newsk;
@@ -1482,6 +1490,9 @@ exit_nonewsk:
 exit:
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
 	return NULL;
+put_and_exit:
+	sock_put(newsk);
+	goto exit;
 }
 EXPORT_SYMBOL(tcp_v4_syn_recv_sock);
 
@@ -1764,12 +1775,13 @@ struct inet_peer *tcp_v4_get_peer(struct sock *sk, bool *release_it)
 	struct inet_sock *inet = inet_sk(sk);
 	struct inet_peer *peer;
 
-	if (!rt || rt->rt_dst != inet->inet_daddr) {
+	if (!rt ||
+	    inet->cork.fl.u.ip4.daddr != inet->inet_daddr) {
 		peer = inet_getpeer_v4(inet->inet_daddr, 1);
 		*release_it = true;
 	} else {
 		if (!rt->peer)
-			rt_bind_peer(rt, 1);
+			rt_bind_peer(rt, inet->inet_daddr, 1);
 		peer = rt->peer;
 		*release_it = false;
 	}
@@ -2527,7 +2539,7 @@ void tcp4_proc_exit(void)
 
 struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 {
-	struct iphdr *iph = skb_gro_network_header(skb);
+	const struct iphdr *iph = skb_gro_network_header(skb);
 
 	switch (skb->ip_summed) {
 	case CHECKSUM_COMPLETE:
@@ -2548,7 +2560,7 @@ struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 
 int tcp4_gro_complete(struct sk_buff *skb)
 {
-	struct iphdr *iph = ip_hdr(skb);
+	const struct iphdr *iph = ip_hdr(skb);
 	struct tcphdr *th = tcp_hdr(skb);
 
 	th->check = ~tcp_v4_check(skb->len - skb_transport_offset(skb),
diff --git a/net/ipv4/tcp_lp.c b/net/ipv4/tcp_lp.c
index 656d431c99a..72f7218b03f 100644
--- a/net/ipv4/tcp_lp.c
+++ b/net/ipv4/tcp_lp.c
@@ -12,7 +12,7 @@
  *     within cong_avoid.
  *   o Error correcting in remote HZ, therefore remote HZ will be keeped
  *     on checking and updating.
- *   o Handling calculation of One-Way-Delay (OWD) within rtt_sample, sicne
+ *   o Handling calculation of One-Way-Delay (OWD) within rtt_sample, since
  *     OWD have a similar meaning as RTT. Also correct the buggy formular.
  *   o Handle reaction for Early Congestion Indication (ECI) within
  *     pkts_acked, as mentioned within pseudo code.
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 8b0d0167e44..882e0b0964d 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -73,7 +73,7 @@ static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
 	tcp_advance_send_head(sk, skb);
 	tp->snd_nxt = TCP_SKB_CB(skb)->end_seq;
 
-	/* Don't override Nagle indefinately with F-RTO */
+	/* Don't override Nagle indefinitely with F-RTO */
 	if (tp->frto_counter == 2)
 		tp->frto_counter = 3;
 
@@ -899,7 +899,7 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it,
 		TCP_ADD_STATS(sock_net(sk), TCP_MIB_OUTSEGS,
 			      tcp_skb_pcount(skb));
 
-	err = icsk->icsk_af_ops->queue_xmit(skb);
+	err = icsk->icsk_af_ops->queue_xmit(skb, &inet->cork.fl);
 	if (likely(err <= 0))
 		return err;
 
diff --git a/net/ipv4/tcp_yeah.c b/net/ipv4/tcp_yeah.c
index dc7f43179c9..05c3b6f0e8e 100644
--- a/net/ipv4/tcp_yeah.c
+++ b/net/ipv4/tcp_yeah.c
@@ -20,7 +20,7 @@
 #define TCP_YEAH_DELTA        3 //log minimum fraction of cwnd to be removed on loss
 #define TCP_YEAH_EPSILON      1 //log maximum fraction to be removed on early decongestion
 #define TCP_YEAH_PHY          8 //lin maximum delta from base
-#define TCP_YEAH_RHO         16 //lin minumum number of consecutive rtt to consider competition on loss
+#define TCP_YEAH_RHO         16 //lin minimum number of consecutive rtt to consider competition on loss
 #define TCP_YEAH_ZETA        50 //lin minimum number of state switchs to reset reno_count
 
 #define TCP_SCALABLE_AI_CNT	 100U
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 588f47af5fa..599374f65c7 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -189,7 +189,7 @@ static int udp_lib_lport_inuse2(struct net *net, __u16 num,
  *  @sk:          socket struct in question
  *  @snum:        port number to look up
  *  @saddr_comp:  AF-dependent comparison of bound local IP addresses
- *  @hash2_nulladdr: AF-dependant hash value in secondary hash chains,
+ *  @hash2_nulladdr: AF-dependent hash value in secondary hash chains,
  *                   with NULL address
  */
 int udp_lib_get_port(struct sock *sk, unsigned short snum,
@@ -578,7 +578,7 @@ found:
 void __udp4_lib_err(struct sk_buff *skb, u32 info, struct udp_table *udptable)
 {
 	struct inet_sock *inet;
-	struct iphdr *iph = (struct iphdr *)skb->data;
+	const struct iphdr *iph = (const struct iphdr *)skb->data;
 	struct udphdr *uh = (struct udphdr *)(skb->data+(iph->ihl<<2));
 	const int type = icmp_hdr(skb)->type;
 	const int code = icmp_hdr(skb)->code;
@@ -706,12 +706,11 @@ static void udp4_hwcsum(struct sk_buff *skb, __be32 src, __be32 dst)
 	}
 }
 
-static int udp_send_skb(struct sk_buff *skb, __be32 daddr, __be32 dport)
+static int udp_send_skb(struct sk_buff *skb, struct flowi4 *fl4)
 {
 	struct sock *sk = skb->sk;
 	struct inet_sock *inet = inet_sk(sk);
 	struct udphdr *uh;
-	struct rtable *rt = (struct rtable *)skb_dst(skb);
 	int err = 0;
 	int is_udplite = IS_UDPLITE(sk);
 	int offset = skb_transport_offset(skb);
@@ -723,7 +722,7 @@ static int udp_send_skb(struct sk_buff *skb, __be32 daddr, __be32 dport)
 	 */
 	uh = udp_hdr(skb);
 	uh->source = inet->inet_sport;
-	uh->dest = dport;
+	uh->dest = fl4->fl4_dport;
 	uh->len = htons(len);
 	uh->check = 0;
 
@@ -737,14 +736,14 @@ static int udp_send_skb(struct sk_buff *skb, __be32 daddr, __be32 dport)
 
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) { /* UDP hardware csum */
 
-		udp4_hwcsum(skb, rt->rt_src, daddr);
+		udp4_hwcsum(skb, fl4->saddr, fl4->daddr);
 		goto send;
 
 	} else
 		csum = udp_csum(skb);
 
 	/* add protocol-dependent pseudo-header */
-	uh->check = csum_tcpudp_magic(rt->rt_src, daddr, len,
+	uh->check = csum_tcpudp_magic(fl4->saddr, fl4->daddr, len,
 				      sk->sk_protocol, csum);
 	if (uh->check == 0)
 		uh->check = CSUM_MANGLED_0;
@@ -774,11 +773,11 @@ static int udp_push_pending_frames(struct sock *sk)
 	struct sk_buff *skb;
 	int err = 0;
 
-	skb = ip_finish_skb(sk);
+	skb = ip_finish_skb(sk, fl4);
 	if (!skb)
 		goto out;
 
-	err = udp_send_skb(skb, fl4->daddr, fl4->fl4_dport);
+	err = udp_send_skb(skb, fl4);
 
 out:
 	up->len = 0;
@@ -791,6 +790,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct udp_sock *up = udp_sk(sk);
+	struct flowi4 fl4_stack;
 	struct flowi4 *fl4;
 	int ulen = len;
 	struct ipcm_cookie ipc;
@@ -804,6 +804,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
 	int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
 	struct sk_buff *skb;
+	struct ip_options_data opt_copy;
 
 	if (len > 0xFFFF)
 		return -EMSGSIZE;
@@ -820,6 +821,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 
 	getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
 
+	fl4 = &inet->cork.fl.u.ip4;
 	if (up->pending) {
 		/*
 		 * There are pending frames.
@@ -877,22 +879,32 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 			free = 1;
 		connected = 0;
 	}
-	if (!ipc.opt)
-		ipc.opt = inet->opt;
+	if (!ipc.opt) {
+		struct ip_options_rcu *inet_opt;
+
+		rcu_read_lock();
+		inet_opt = rcu_dereference(inet->inet_opt);
+		if (inet_opt) {
+			memcpy(&opt_copy, inet_opt,
+			       sizeof(*inet_opt) + inet_opt->opt.optlen);
+			ipc.opt = &opt_copy.opt;
+		}
+		rcu_read_unlock();
+	}
 
 	saddr = ipc.addr;
 	ipc.addr = faddr = daddr;
 
-	if (ipc.opt && ipc.opt->srr) {
+	if (ipc.opt && ipc.opt->opt.srr) {
 		if (!daddr)
 			return -EINVAL;
-		faddr = ipc.opt->faddr;
+		faddr = ipc.opt->opt.faddr;
 		connected = 0;
 	}
 	tos = RT_TOS(inet->tos);
 	if (sock_flag(sk, SOCK_LOCALROUTE) ||
 	    (msg->msg_flags & MSG_DONTROUTE) ||
-	    (ipc.opt && ipc.opt->is_strictroute)) {
+	    (ipc.opt && ipc.opt->opt.is_strictroute)) {
 		tos |= RTO_ONLINK;
 		connected = 0;
 	}
@@ -909,22 +921,16 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		rt = (struct rtable *)sk_dst_check(sk, 0);
 
 	if (rt == NULL) {
-		struct flowi4 fl4 = {
-			.flowi4_oif = ipc.oif,
-			.flowi4_mark = sk->sk_mark,
-			.daddr = faddr,
-			.saddr = saddr,
-			.flowi4_tos = tos,
-			.flowi4_proto = sk->sk_protocol,
-			.flowi4_flags = (inet_sk_flowi_flags(sk) |
-					 FLOWI_FLAG_CAN_SLEEP),
-			.fl4_sport = inet->inet_sport,
-			.fl4_dport = dport,
-		};
 		struct net *net = sock_net(sk);
 
-		security_sk_classify_flow(sk, flowi4_to_flowi(&fl4));
-		rt = ip_route_output_flow(net, &fl4, sk);
+		fl4 = &fl4_stack;
+		flowi4_init_output(fl4, ipc.oif, sk->sk_mark, tos,
+				   RT_SCOPE_UNIVERSE, sk->sk_protocol,
+				   inet_sk_flowi_flags(sk)|FLOWI_FLAG_CAN_SLEEP,
+				   faddr, saddr, dport, inet->inet_sport);
+
+		security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+		rt = ip_route_output_flow(net, fl4, sk);
 		if (IS_ERR(rt)) {
 			err = PTR_ERR(rt);
 			rt = NULL;
@@ -945,18 +951,18 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		goto do_confirm;
 back_from_confirm:
 
-	saddr = rt->rt_src;
+	saddr = fl4->saddr;
 	if (!ipc.addr)
-		daddr = ipc.addr = rt->rt_dst;
+		daddr = ipc.addr = fl4->daddr;
 
 	/* Lockless fast path for the non-corking case. */
 	if (!corkreq) {
-		skb = ip_make_skb(sk, getfrag, msg->msg_iov, ulen,
+		skb = ip_make_skb(sk, fl4, getfrag, msg->msg_iov, ulen,
 				  sizeof(struct udphdr), &ipc, &rt,
 				  msg->msg_flags);
 		err = PTR_ERR(skb);
 		if (skb && !IS_ERR(skb))
-			err = udp_send_skb(skb, daddr, dport);
+			err = udp_send_skb(skb, fl4);
 		goto out;
 	}
 
@@ -982,9 +988,9 @@ back_from_confirm:
 
 do_append_data:
 	up->len += ulen;
-	err = ip_append_data(sk, getfrag, msg->msg_iov, ulen,
-			sizeof(struct udphdr), &ipc, &rt,
-			corkreq ? msg->msg_flags|MSG_MORE : msg->msg_flags);
+	err = ip_append_data(sk, fl4, getfrag, msg->msg_iov, ulen,
+			     sizeof(struct udphdr), &ipc, &rt,
+			     corkreq ? msg->msg_flags|MSG_MORE : msg->msg_flags);
 	if (err)
 		udp_flush_pending_frames(sk);
 	else if (!corkreq)
@@ -1024,6 +1030,7 @@ EXPORT_SYMBOL(udp_sendmsg);
 int udp_sendpage(struct sock *sk, struct page *page, int offset,
 		 size_t size, int flags)
 {
+	struct inet_sock *inet = inet_sk(sk);
 	struct udp_sock *up = udp_sk(sk);
 	int ret;
 
@@ -1048,7 +1055,8 @@ int udp_sendpage(struct sock *sk, struct page *page, int offset,
 		return -EINVAL;
 	}
 
-	ret = ip_append_page(sk, page, offset, size, flags);
+	ret = ip_append_page(sk, &inet->cork.fl.u.ip4,
+			     page, offset, size, flags);
 	if (ret == -EOPNOTSUPP) {
 		release_sock(sk);
 		return sock_no_sendpage(sk->sk_socket, page, offset,
diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c
index 571aa96a175..2d51840e53a 100644
--- a/net/ipv4/xfrm4_output.c
+++ b/net/ipv4/xfrm4_output.c
@@ -69,7 +69,7 @@ int xfrm4_prepare_output(struct xfrm_state *x, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(xfrm4_prepare_output);
 
-static int xfrm4_output_finish(struct sk_buff *skb)
+int xfrm4_output_finish(struct sk_buff *skb)
 {
 #ifdef CONFIG_NETFILTER
 	if (!skb_dst(skb)->xfrm) {
@@ -86,7 +86,11 @@ static int xfrm4_output_finish(struct sk_buff *skb)
 
 int xfrm4_output(struct sk_buff *skb)
 {
+	struct dst_entry *dst = skb_dst(skb);
+	struct xfrm_state *x = dst->xfrm;
+
 	return NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING, skb,
-			    NULL, skb_dst(skb)->dev, xfrm4_output_finish,
+			    NULL, dst->dev,
+			    x->outer_mode->afinfo->output_finish,
 			    !(IPCB(skb)->flags & IPSKB_REROUTED));
 }
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 13e0e7f659f..981e43eaf70 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -18,38 +18,46 @@
 
 static struct xfrm_policy_afinfo xfrm4_policy_afinfo;
 
-static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos,
-					  const xfrm_address_t *saddr,
-					  const xfrm_address_t *daddr)
+static struct dst_entry *__xfrm4_dst_lookup(struct net *net, struct flowi4 *fl4,
+					    int tos,
+					    const xfrm_address_t *saddr,
+					    const xfrm_address_t *daddr)
 {
-	struct flowi4 fl4 = {
-		.daddr = daddr->a4,
-		.flowi4_tos = tos,
-	};
 	struct rtable *rt;
 
+	memset(fl4, 0, sizeof(*fl4));
+	fl4->daddr = daddr->a4;
+	fl4->flowi4_tos = tos;
 	if (saddr)
-		fl4.saddr = saddr->a4;
+		fl4->saddr = saddr->a4;
 
-	rt = __ip_route_output_key(net, &fl4);
+	rt = __ip_route_output_key(net, fl4);
 	if (!IS_ERR(rt))
 		return &rt->dst;
 
 	return ERR_CAST(rt);
 }
 
+static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos,
+					  const xfrm_address_t *saddr,
+					  const xfrm_address_t *daddr)
+{
+	struct flowi4 fl4;
+
+	return __xfrm4_dst_lookup(net, &fl4, tos, saddr, daddr);
+}
+
 static int xfrm4_get_saddr(struct net *net,
 			   xfrm_address_t *saddr, xfrm_address_t *daddr)
 {
 	struct dst_entry *dst;
-	struct rtable *rt;
+	struct flowi4 fl4;
 
-	dst = xfrm4_dst_lookup(net, 0, NULL, daddr);
+	dst = __xfrm4_dst_lookup(net, &fl4, 0, NULL, daddr);
 	if (IS_ERR(dst))
 		return -EHOSTUNREACH;
 
-	rt = (struct rtable *)dst;
-	saddr->a4 = rt->rt_src;
+	saddr->a4 = fl4.saddr;
 	dst_release(dst);
 	return 0;
 }
@@ -73,7 +81,8 @@ static int xfrm4_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
 
 	rt->rt_key_dst = fl4->daddr;
 	rt->rt_key_src = fl4->saddr;
-	rt->rt_tos = fl4->flowi4_tos;
+	rt->rt_key_tos = fl4->flowi4_tos;
+	rt->rt_route_iif = fl4->flowi4_iif;
 	rt->rt_iif = fl4->flowi4_iif;
 	rt->rt_oif = fl4->flowi4_oif;
 	rt->rt_mark = fl4->flowi4_mark;
@@ -101,7 +110,7 @@ static int xfrm4_fill_dst(struct xfrm_dst *xdst, struct net_device *dev,
 static void
 _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
 {
-	struct iphdr *iph = ip_hdr(skb);
+	const struct iphdr *iph = ip_hdr(skb);
 	u8 *xprth = skb_network_header(skb) + iph->ihl * 4;
 	struct flowi4 *fl4 = &fl->u.ip4;
 
diff --git a/net/ipv4/xfrm4_state.c b/net/ipv4/xfrm4_state.c
index 1717c64628d..d9ac0a0058b 100644
--- a/net/ipv4/xfrm4_state.c
+++ b/net/ipv4/xfrm4_state.c
@@ -55,7 +55,7 @@ xfrm4_init_temprop(struct xfrm_state *x, const struct xfrm_tmpl *tmpl,
 
 int xfrm4_extract_header(struct sk_buff *skb)
 {
-	struct iphdr *iph = ip_hdr(skb);
+	const struct iphdr *iph = ip_hdr(skb);
 
 	XFRM_MODE_SKB_CB(skb)->ihl = sizeof(*iph);
 	XFRM_MODE_SKB_CB(skb)->id = iph->id;
@@ -78,6 +78,7 @@ static struct xfrm_state_afinfo xfrm4_state_afinfo = {
 	.init_tempsel		= __xfrm4_init_tempsel,
 	.init_temprop		= xfrm4_init_temprop,
 	.output			= xfrm4_output,
+	.output_finish		= xfrm4_output_finish,
 	.extract_input		= xfrm4_extract_input,
 	.extract_output		= xfrm4_extract_output,
 	.transport_finish	= xfrm4_transport_finish,
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 3daaf3c7703..498b927f68b 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -289,19 +289,19 @@ static int snmp6_alloc_dev(struct inet6_dev *idev)
 			  sizeof(struct ipstats_mib),
 			  __alignof__(struct ipstats_mib)) < 0)
 		goto err_ip;
-	if (snmp_mib_init((void __percpu **)idev->stats.icmpv6,
-			  sizeof(struct icmpv6_mib),
-			  __alignof__(struct icmpv6_mib)) < 0)
+	idev->stats.icmpv6dev = kzalloc(sizeof(struct icmpv6_mib_device),
+					GFP_KERNEL);
+	if (!idev->stats.icmpv6dev)
 		goto err_icmp;
-	if (snmp_mib_init((void __percpu **)idev->stats.icmpv6msg,
-			  sizeof(struct icmpv6msg_mib),
-			  __alignof__(struct icmpv6msg_mib)) < 0)
+	idev->stats.icmpv6msgdev = kzalloc(sizeof(struct icmpv6msg_mib_device),
+					   GFP_KERNEL);
+	if (!idev->stats.icmpv6msgdev)
 		goto err_icmpmsg;
 
 	return 0;
 
 err_icmpmsg:
-	snmp_mib_free((void __percpu **)idev->stats.icmpv6);
+	kfree(idev->stats.icmpv6dev);
 err_icmp:
 	snmp_mib_free((void __percpu **)idev->stats.ipv6);
 err_ip:
@@ -310,19 +310,13 @@ err_ip:
 
 static void snmp6_free_dev(struct inet6_dev *idev)
 {
-	snmp_mib_free((void __percpu **)idev->stats.icmpv6msg);
-	snmp_mib_free((void __percpu **)idev->stats.icmpv6);
+	kfree(idev->stats.icmpv6msgdev);
+	kfree(idev->stats.icmpv6dev);
 	snmp_mib_free((void __percpu **)idev->stats.ipv6);
 }
 
 /* Nobody refers to this device, we may destroy it. */
 
-static void in6_dev_finish_destroy_rcu(struct rcu_head *head)
-{
-	struct inet6_dev *idev = container_of(head, struct inet6_dev, rcu);
-	kfree(idev);
-}
-
 void in6_dev_finish_destroy(struct inet6_dev *idev)
 {
 	struct net_device *dev = idev->dev;
@@ -339,7 +333,7 @@ void in6_dev_finish_destroy(struct inet6_dev *idev)
 		return;
 	}
 	snmp6_free_dev(idev);
-	call_rcu(&idev->rcu, in6_dev_finish_destroy_rcu);
+	kfree_rcu(idev, rcu);
 }
 
 EXPORT_SYMBOL(in6_dev_finish_destroy);
@@ -535,12 +529,6 @@ static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 }
 #endif
 
-static void inet6_ifa_finish_destroy_rcu(struct rcu_head *head)
-{
-	struct inet6_ifaddr *ifp = container_of(head, struct inet6_ifaddr, rcu);
-	kfree(ifp);
-}
-
 /* Nobody refers to this ifaddr, destroy it */
 void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp)
 {
@@ -561,7 +549,7 @@ void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp)
 	}
 	dst_release(&ifp->rt->dst);
 
-	call_rcu(&ifp->rcu, inet6_ifa_finish_destroy_rcu);
+	kfree_rcu(ifp, rcu);
 }
 
 static void
@@ -825,6 +813,8 @@ static void ipv6_del_addr(struct inet6_ifaddr *ifp)
 		dst_release(&rt->dst);
 	}
 
+	/* clean up prefsrc entries */
+	rt6_remove_prefsrc(ifp);
 out:
 	in6_ifa_put(ifp);
 }
@@ -1084,7 +1074,7 @@ static int ipv6_get_saddr_eval(struct net *net,
 	case IPV6_SADDR_RULE_PRIVACY:
 	    {
 		/* Rule 7: Prefer public address
-		 * Note: prefer temprary address if use_tempaddr >= 2
+		 * Note: prefer temporary address if use_tempaddr >= 2
 		 */
 		int preftmp = dst->prefs & (IPV6_PREFER_SRC_PUBLIC|IPV6_PREFER_SRC_TMP) ?
 				!!(dst->prefs & IPV6_PREFER_SRC_TMP) :
@@ -1281,7 +1271,7 @@ static int ipv6_count_addresses(struct inet6_dev *idev)
 	return cnt;
 }
 
-int ipv6_chk_addr(struct net *net, struct in6_addr *addr,
+int ipv6_chk_addr(struct net *net, const struct in6_addr *addr,
 		  struct net_device *dev, int strict)
 {
 	struct inet6_ifaddr *ifp;
@@ -1324,7 +1314,7 @@ static bool ipv6_chk_same_addr(struct net *net, const struct in6_addr *addr,
 	return false;
 }
 
-int ipv6_chk_prefix(struct in6_addr *addr, struct net_device *dev)
+int ipv6_chk_prefix(const struct in6_addr *addr, struct net_device *dev)
 {
 	struct inet6_dev *idev;
 	struct inet6_ifaddr *ifa;
@@ -1455,7 +1445,7 @@ void addrconf_dad_failure(struct inet6_ifaddr *ifp)
 
 /* Join to solicited addr multicast group. */
 
-void addrconf_join_solict(struct net_device *dev, struct in6_addr *addr)
+void addrconf_join_solict(struct net_device *dev, const struct in6_addr *addr)
 {
 	struct in6_addr maddr;
 
@@ -1466,7 +1456,7 @@ void addrconf_join_solict(struct net_device *dev, struct in6_addr *addr)
 	ipv6_dev_mc_inc(dev, &maddr);
 }
 
-void addrconf_leave_solict(struct inet6_dev *idev, struct in6_addr *addr)
+void addrconf_leave_solict(struct inet6_dev *idev, const struct in6_addr *addr)
 {
 	struct in6_addr maddr;
 
@@ -1968,7 +1958,7 @@ ok:
 					 *  to the stored lifetime since we'll
 					 *  be updating the timestamp below,
 					 *  else we'll set it back to the
-					 *  minumum.
+					 *  minimum.
 					 */
 					if (prefered_lft != ifp->prefered_lft) {
 						valid_lft = stored_lft;
@@ -2111,7 +2101,7 @@ err_exit:
 /*
  *	Manual configuration of address on an interface
  */
-static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx,
+static int inet6_addr_add(struct net *net, int ifindex, const struct in6_addr *pfx,
 			  unsigned int plen, __u8 ifa_flags, __u32 prefered_lft,
 			  __u32 valid_lft)
 {
@@ -2185,7 +2175,7 @@ static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx,
 	return PTR_ERR(ifp);
 }
 
-static int inet6_addr_del(struct net *net, int ifindex, struct in6_addr *pfx,
+static int inet6_addr_del(struct net *net, int ifindex, const struct in6_addr *pfx,
 			  unsigned int plen)
 {
 	struct inet6_ifaddr *ifp;
@@ -2348,7 +2338,7 @@ static void init_loopback(struct net_device *dev)
 	add_addr(idev, &in6addr_loopback, 128, IFA_HOST);
 }
 
-static void addrconf_add_linklocal(struct inet6_dev *idev, struct in6_addr *addr)
+static void addrconf_add_linklocal(struct inet6_dev *idev, const struct in6_addr *addr)
 {
 	struct inet6_ifaddr * ifp;
 	u32 addr_flags = IFA_F_PERMANENT;
@@ -3119,7 +3109,7 @@ void if6_proc_exit(void)
 
 #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
 /* Check if address is a home address configured on any interface. */
-int ipv6_chk_home_addr(struct net *net, struct in6_addr *addr)
+int ipv6_chk_home_addr(struct net *net, const struct in6_addr *addr)
 {
 	int ret = 0;
 	struct inet6_ifaddr *ifp = NULL;
@@ -3836,7 +3826,7 @@ static inline size_t inet6_if_nlmsg_size(void)
 	       + nla_total_size(inet6_ifla6_size()); /* IFLA_PROTINFO */
 }
 
-static inline void __snmp6_fill_stats(u64 *stats, void __percpu **mib,
+static inline void __snmp6_fill_statsdev(u64 *stats, atomic_long_t *mib,
 				      int items, int bytes)
 {
 	int i;
@@ -3846,7 +3836,7 @@ static inline void __snmp6_fill_stats(u64 *stats, void __percpu **mib,
 	/* Use put_unaligned() because stats may not be aligned for u64. */
 	put_unaligned(items, &stats[0]);
 	for (i = 1; i < items; i++)
-		put_unaligned(snmp_fold_field(mib, i), &stats[i]);
+		put_unaligned(atomic_long_read(&mib[i]), &stats[i]);
 
 	memset(&stats[items], 0, pad);
 }
@@ -3875,7 +3865,7 @@ static void snmp6_fill_stats(u64 *stats, struct inet6_dev *idev, int attrtype,
 				     IPSTATS_MIB_MAX, bytes, offsetof(struct ipstats_mib, syncp));
 		break;
 	case IFLA_INET6_ICMP6STATS:
-		__snmp6_fill_stats(stats, (void __percpu **)idev->stats.icmpv6, ICMP6_MIB_MAX, bytes);
+		__snmp6_fill_statsdev(stats, idev->stats.icmpv6dev->mibs, ICMP6_MIB_MAX, bytes);
 		break;
 	}
 }
@@ -4537,7 +4527,7 @@ static void __addrconf_sysctl_unregister(struct ipv6_devconf *p)
 
 	t = p->sysctl;
 	p->sysctl = NULL;
-	unregister_sysctl_table(t->sysctl_header);
+	unregister_net_sysctl_table(t->sysctl_header);
 	kfree(t->dev_name);
 	kfree(t);
 }
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 4b13d5d8890..b7919f901fb 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -740,7 +740,7 @@ static int ipv6_gso_pull_exthdrs(struct sk_buff *skb, int proto)
 
 static int ipv6_gso_send_check(struct sk_buff *skb)
 {
-	struct ipv6hdr *ipv6h;
+	const struct ipv6hdr *ipv6h;
 	const struct inet6_protocol *ops;
 	int err = -EINVAL;
 
@@ -1113,7 +1113,7 @@ static int __init inet6_init(void)
 	/*
 	 *	ipngwg API draft makes clear that the correct semantics
 	 *	for TCP and UDP is to consider one TCP and UDP instance
-	 *	in a host availiable by both INET and INET6 APIs and
+	 *	in a host available by both INET and INET6 APIs and
 	 *	able to communicate via both network protocols.
 	 */
 
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index 0e5e943446f..674255f5e6b 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -44,7 +44,7 @@
 
 #include <net/checksum.h>
 
-static int ipv6_dev_ac_dec(struct net_device *dev, struct in6_addr *addr);
+static int ipv6_dev_ac_dec(struct net_device *dev, const struct in6_addr *addr);
 
 /* Big ac list lock for all the sockets */
 static DEFINE_RWLOCK(ipv6_sk_ac_lock);
@@ -54,7 +54,7 @@ static DEFINE_RWLOCK(ipv6_sk_ac_lock);
  *	socket join an anycast group
  */
 
-int ipv6_sock_ac_join(struct sock *sk, int ifindex, struct in6_addr *addr)
+int ipv6_sock_ac_join(struct sock *sk, int ifindex, const struct in6_addr *addr)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct net_device *dev = NULL;
@@ -145,7 +145,7 @@ error:
 /*
  *	socket leave an anycast group
  */
-int ipv6_sock_ac_drop(struct sock *sk, int ifindex, struct in6_addr *addr)
+int ipv6_sock_ac_drop(struct sock *sk, int ifindex, const struct in6_addr *addr)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct net_device *dev;
@@ -252,7 +252,7 @@ static void aca_put(struct ifacaddr6 *ac)
 /*
  *	device anycast group inc (add if not found)
  */
-int ipv6_dev_ac_inc(struct net_device *dev, struct in6_addr *addr)
+int ipv6_dev_ac_inc(struct net_device *dev, const struct in6_addr *addr)
 {
 	struct ifacaddr6 *aca;
 	struct inet6_dev *idev;
@@ -324,7 +324,7 @@ out:
 /*
  *	device anycast group decrement
  */
-int __ipv6_dev_ac_dec(struct inet6_dev *idev, struct in6_addr *addr)
+int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr)
 {
 	struct ifacaddr6 *aca, *prev_aca;
 
@@ -358,7 +358,7 @@ int __ipv6_dev_ac_dec(struct inet6_dev *idev, struct in6_addr *addr)
 }
 
 /* called with rcu_read_lock() */
-static int ipv6_dev_ac_dec(struct net_device *dev, struct in6_addr *addr)
+static int ipv6_dev_ac_dec(struct net_device *dev, const struct in6_addr *addr)
 {
 	struct inet6_dev *idev = __in6_dev_get(dev);
 
@@ -371,7 +371,7 @@ static int ipv6_dev_ac_dec(struct net_device *dev, struct in6_addr *addr)
  *	check if the interface has this anycast address
  *	called with rcu_read_lock()
  */
-static int ipv6_chk_acast_dev(struct net_device *dev, struct in6_addr *addr)
+static int ipv6_chk_acast_dev(struct net_device *dev, const struct in6_addr *addr)
 {
 	struct inet6_dev *idev;
 	struct ifacaddr6 *aca;
@@ -392,7 +392,7 @@ static int ipv6_chk_acast_dev(struct net_device *dev, struct in6_addr *addr)
  *	check if given interface (or any, if dev==0) has this anycast address
  */
 int ipv6_chk_acast_addr(struct net *net, struct net_device *dev,
-			struct in6_addr *addr)
+			const struct in6_addr *addr)
 {
 	int found = 0;
 
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 5aa8ec88f19..1ac7938dd9e 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -371,7 +371,7 @@ static int esp6_input(struct xfrm_state *x, struct sk_buff *skb)
 	iv = esp_tmp_iv(aead, tmp, seqhilen);
 	req = esp_tmp_req(aead, iv);
 	asg = esp_req_sg(aead, req);
-	sg = asg + 1;
+	sg = asg + sglists;
 
 	skb->ip_summed = CHECKSUM_NONE;
 
@@ -430,7 +430,7 @@ static void esp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		     u8 type, u8 code, int offset, __be32 info)
 {
 	struct net *net = dev_net(skb->dev);
-	struct ipv6hdr *iph = (struct ipv6hdr*)skb->data;
+	const struct ipv6hdr *iph = (const struct ipv6hdr *)skb->data;
 	struct ip_esp_hdr *esph = (struct ip_esp_hdr *)(skb->data + offset);
 	struct xfrm_state *x;
 
@@ -438,7 +438,8 @@ static void esp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	    type != ICMPV6_PKT_TOOBIG)
 		return;
 
-	x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr, esph->spi, IPPROTO_ESP, AF_INET6);
+	x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
+			      esph->spi, IPPROTO_ESP, AF_INET6);
 	if (!x)
 		return;
 	printk(KERN_DEBUG "pmtu discovery on SA ESP/%08x/%pI6\n",
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 83cb4f9add8..11900417b1c 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -372,7 +372,7 @@ void icmpv6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info)
 	struct ipv6hdr *hdr = ipv6_hdr(skb);
 	struct sock *sk;
 	struct ipv6_pinfo *np;
-	struct in6_addr *saddr = NULL;
+	const struct in6_addr *saddr = NULL;
 	struct dst_entry *dst;
 	struct icmp6hdr tmp_hdr;
 	struct flowi6 fl6;
@@ -521,7 +521,7 @@ static void icmpv6_echo_reply(struct sk_buff *skb)
 	struct sock *sk;
 	struct inet6_dev *idev;
 	struct ipv6_pinfo *np;
-	struct in6_addr *saddr = NULL;
+	const struct in6_addr *saddr = NULL;
 	struct icmp6hdr *icmph = icmp6_hdr(skb);
 	struct icmp6hdr tmp_hdr;
 	struct flowi6 fl6;
@@ -645,8 +645,8 @@ static int icmpv6_rcv(struct sk_buff *skb)
 {
 	struct net_device *dev = skb->dev;
 	struct inet6_dev *idev = __in6_dev_get(dev);
-	struct in6_addr *saddr, *daddr;
-	struct ipv6hdr *orig_hdr;
+	const struct in6_addr *saddr, *daddr;
+	const struct ipv6hdr *orig_hdr;
 	struct icmp6hdr *hdr;
 	u8 type;
 
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index 16605465046..8a58e8cf664 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -44,7 +44,7 @@ int inet6_csk_bind_conflict(const struct sock *sk,
 		     !sk2->sk_bound_dev_if ||
 		     sk->sk_bound_dev_if == sk2->sk_bound_dev_if) &&
 		    (!sk->sk_reuse || !sk2->sk_reuse ||
-		     ((1 << sk2->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))) &&
+		     sk2->sk_state == TCP_LISTEN) &&
 		     ipv6_rcv_saddr_equal(sk, sk2))
 			break;
 	}
@@ -203,7 +203,7 @@ struct dst_entry *__inet6_csk_dst_check(struct sock *sk, u32 cookie)
 	return dst;
 }
 
-int inet6_csk_xmit(struct sk_buff *skb)
+int inet6_csk_xmit(struct sk_buff *skb, struct flowi *fl_unused)
 {
 	struct sock *sk = skb->sk;
 	struct inet_sock *inet = inet_sk(sk);
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 7548905e79e..4076a0b14b2 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -134,9 +134,9 @@ static __inline__ u32 fib6_new_sernum(void)
 # define BITOP_BE32_SWIZZLE	0
 #endif
 
-static __inline__ __be32 addr_bit_set(void *token, int fn_bit)
+static __inline__ __be32 addr_bit_set(const void *token, int fn_bit)
 {
-	__be32 *addr = token;
+	const __be32 *addr = token;
 	/*
 	 * Here,
 	 * 	1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)
@@ -394,10 +394,11 @@ static int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
 	arg.net = net;
 	w->args = &arg;
 
+	rcu_read_lock();
 	for (h = s_h; h < FIB6_TABLE_HASHSZ; h++, s_e = 0) {
 		e = 0;
 		head = &net->ipv6.fib_table_hash[h];
-		hlist_for_each_entry(tb, node, head, tb6_hlist) {
+		hlist_for_each_entry_rcu(tb, node, head, tb6_hlist) {
 			if (e < s_e)
 				goto next;
 			res = fib6_dump_table(tb, skb, cb);
@@ -408,6 +409,7 @@ next:
 		}
 	}
 out:
+	rcu_read_unlock();
 	cb->args[1] = e;
 	cb->args[0] = h;
 
@@ -822,7 +824,7 @@ st_failure:
 
 struct lookup_args {
 	int		offset;		/* key offset on rt6_info	*/
-	struct in6_addr	*addr;		/* search key			*/
+	const struct in6_addr	*addr;		/* search key			*/
 };
 
 static struct fib6_node * fib6_lookup_1(struct fib6_node *root,
@@ -881,8 +883,8 @@ static struct fib6_node * fib6_lookup_1(struct fib6_node *root,
 	return NULL;
 }
 
-struct fib6_node * fib6_lookup(struct fib6_node *root, struct in6_addr *daddr,
-			       struct in6_addr *saddr)
+struct fib6_node * fib6_lookup(struct fib6_node *root, const struct in6_addr *daddr,
+			       const struct in6_addr *saddr)
 {
 	struct fib6_node *fn;
 	struct lookup_args args[] = {
@@ -916,7 +918,7 @@ struct fib6_node * fib6_lookup(struct fib6_node *root, struct in6_addr *daddr,
 
 
 static struct fib6_node * fib6_locate_1(struct fib6_node *root,
-					struct in6_addr *addr,
+					const struct in6_addr *addr,
 					int plen, int offset)
 {
 	struct fib6_node *fn;
@@ -946,8 +948,8 @@ static struct fib6_node * fib6_locate_1(struct fib6_node *root,
 }
 
 struct fib6_node * fib6_locate(struct fib6_node *root,
-			       struct in6_addr *daddr, int dst_len,
-			       struct in6_addr *saddr, int src_len)
+			       const struct in6_addr *daddr, int dst_len,
+			       const struct in6_addr *saddr, int src_len)
 {
 	struct fib6_node *fn;
 
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index a83e9209cec..027c7ff6f1e 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -57,7 +57,7 @@ inline int ip6_rcv_finish( struct sk_buff *skb)
 
 int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
 {
-	struct ipv6hdr *hdr;
+	const struct ipv6hdr *hdr;
 	u32 		pkt_len;
 	struct inet6_dev *idev;
 	struct net *net = dev_net(skb->dev);
@@ -186,7 +186,7 @@ resubmit:
 		int ret;
 
 		if (ipprot->flags & INET6_PROTO_FINAL) {
-			struct ipv6hdr *hdr;
+			const struct ipv6hdr *hdr;
 
 			/* Free reference early: we don't need it any more,
 			   and it may hold ip_conntrack module loaded
@@ -242,7 +242,7 @@ int ip6_input(struct sk_buff *skb)
 
 int ip6_mc_input(struct sk_buff *skb)
 {
-	struct ipv6hdr *hdr;
+	const struct ipv6hdr *hdr;
 	int deliver;
 
 	IP6_UPD_PO_STATS_BH(dev_net(skb_dst(skb)->dev),
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 18208876aa8..9d4b165837d 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -779,7 +779,7 @@ slow_path:
 		/* IF: it doesn't fit, use 'mtu' - the data space left */
 		if (len > mtu)
 			len = mtu;
-		/* IF: we are not sending upto and including the packet end
+		/* IF: we are not sending up to and including the packet end
 		   then align the next start on an eight byte boundary */
 		if (len < left)	{
 			len &= ~7;
@@ -869,9 +869,9 @@ fail:
 	return err;
 }
 
-static inline int ip6_rt_check(struct rt6key *rt_key,
-			       struct in6_addr *fl_addr,
-			       struct in6_addr *addr_cache)
+static inline int ip6_rt_check(const struct rt6key *rt_key,
+			       const struct in6_addr *fl_addr,
+			       const struct in6_addr *addr_cache)
 {
 	return (rt_key->plen != 128 || !ipv6_addr_equal(fl_addr, &rt_key->addr)) &&
 		(addr_cache == NULL || !ipv6_addr_equal(fl_addr, addr_cache));
@@ -879,7 +879,7 @@ static inline int ip6_rt_check(struct rt6key *rt_key,
 
 static struct dst_entry *ip6_sk_dst_check(struct sock *sk,
 					  struct dst_entry *dst,
-					  struct flowi6 *fl6)
+					  const struct flowi6 *fl6)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct rt6_info *rt = (struct rt6_info *)dst;
@@ -930,10 +930,10 @@ static int ip6_dst_lookup_tail(struct sock *sk,
 		goto out_err_release;
 
 	if (ipv6_addr_any(&fl6->saddr)) {
-		err = ipv6_dev_get_saddr(net, ip6_dst_idev(*dst)->dev,
-					 &fl6->daddr,
-					 sk ? inet6_sk(sk)->srcprefs : 0,
-					 &fl6->saddr);
+		struct rt6_info *rt = (struct rt6_info *) *dst;
+		err = ip6_route_get_saddr(net, rt, &fl6->daddr,
+					  sk ? inet6_sk(sk)->srcprefs : 0,
+					  &fl6->saddr);
 		if (err)
 			goto out_err_release;
 	}
@@ -1150,6 +1150,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct ipv6_pinfo *np = inet6_sk(sk);
+	struct inet_cork *cork;
 	struct sk_buff *skb;
 	unsigned int maxfraglen, fragheaderlen;
 	int exthdrlen;
@@ -1163,6 +1164,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 
 	if (flags&MSG_PROBE)
 		return 0;
+	cork = &inet->cork.base;
 	if (skb_queue_empty(&sk->sk_write_queue)) {
 		/*
 		 * setup for corking
@@ -1202,7 +1204,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 			/* need source address above miyazawa*/
 		}
 		dst_hold(&rt->dst);
-		inet->cork.dst = &rt->dst;
+		cork->dst = &rt->dst;
 		inet->cork.fl.u.ip6 = *fl6;
 		np->cork.hop_limit = hlimit;
 		np->cork.tclass = tclass;
@@ -1212,10 +1214,10 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 			if (np->frag_size)
 				mtu = np->frag_size;
 		}
-		inet->cork.fragsize = mtu;
+		cork->fragsize = mtu;
 		if (dst_allfrag(rt->dst.path))
-			inet->cork.flags |= IPCORK_ALLFRAG;
-		inet->cork.length = 0;
+			cork->flags |= IPCORK_ALLFRAG;
+		cork->length = 0;
 		sk->sk_sndmsg_page = NULL;
 		sk->sk_sndmsg_off = 0;
 		exthdrlen = rt->dst.header_len + (opt ? opt->opt_flen : 0) -
@@ -1223,12 +1225,12 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 		length += exthdrlen;
 		transhdrlen += exthdrlen;
 	} else {
-		rt = (struct rt6_info *)inet->cork.dst;
+		rt = (struct rt6_info *)cork->dst;
 		fl6 = &inet->cork.fl.u.ip6;
 		opt = np->cork.opt;
 		transhdrlen = 0;
 		exthdrlen = 0;
-		mtu = inet->cork.fragsize;
+		mtu = cork->fragsize;
 	}
 
 	hh_len = LL_RESERVED_SPACE(rt->dst.dev);
@@ -1238,7 +1240,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen - sizeof(struct frag_hdr);
 
 	if (mtu <= sizeof(struct ipv6hdr) + IPV6_MAXPLEN) {
-		if (inet->cork.length + length > sizeof(struct ipv6hdr) + IPV6_MAXPLEN - fragheaderlen) {
+		if (cork->length + length > sizeof(struct ipv6hdr) + IPV6_MAXPLEN - fragheaderlen) {
 			ipv6_local_error(sk, EMSGSIZE, fl6, mtu-exthdrlen);
 			return -EMSGSIZE;
 		}
@@ -1267,7 +1269,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 	 * --yoshfuji
 	 */
 
-	inet->cork.length += length;
+	cork->length += length;
 	if (length > mtu) {
 		int proto = sk->sk_protocol;
 		if (dontfrag && (proto == IPPROTO_UDP || proto == IPPROTO_RAW)){
@@ -1292,7 +1294,7 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
 
 	while (length > 0) {
 		/* Check if the remaining data fits into current packet. */
-		copy = (inet->cork.length <= mtu && !(inet->cork.flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - skb->len;
+		copy = (cork->length <= mtu && !(cork->flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - skb->len;
 		if (copy < length)
 			copy = maxfraglen - skb->len;
 
@@ -1317,7 +1319,7 @@ alloc_new_skb:
 			 * we know we need more fragment(s).
 			 */
 			datalen = length + fraggap;
-			if (datalen > (inet->cork.length <= mtu && !(inet->cork.flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - fragheaderlen)
+			if (datalen > (cork->length <= mtu && !(cork->flags & IPCORK_ALLFRAG) ? mtu : maxfraglen) - fragheaderlen)
 				datalen = maxfraglen - fragheaderlen;
 
 			fraglen = datalen + fragheaderlen;
@@ -1481,7 +1483,7 @@ alloc_new_skb:
 	}
 	return 0;
 error:
-	inet->cork.length -= length;
+	cork->length -= length;
 	IP6_INC_STATS(sock_net(sk), rt->rt6i_idev, IPSTATS_MIB_OUTDISCARDS);
 	return err;
 }
@@ -1497,10 +1499,10 @@ static void ip6_cork_release(struct inet_sock *inet, struct ipv6_pinfo *np)
 		np->cork.opt = NULL;
 	}
 
-	if (inet->cork.dst) {
-		dst_release(inet->cork.dst);
-		inet->cork.dst = NULL;
-		inet->cork.flags &= ~IPCORK_ALLFRAG;
+	if (inet->cork.base.dst) {
+		dst_release(inet->cork.base.dst);
+		inet->cork.base.dst = NULL;
+		inet->cork.base.flags &= ~IPCORK_ALLFRAG;
 	}
 	memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
 }
@@ -1515,7 +1517,7 @@ int ip6_push_pending_frames(struct sock *sk)
 	struct net *net = sock_net(sk);
 	struct ipv6hdr *hdr;
 	struct ipv6_txoptions *opt = np->cork.opt;
-	struct rt6_info *rt = (struct rt6_info *)inet->cork.dst;
+	struct rt6_info *rt = (struct rt6_info *)inet->cork.base.dst;
 	struct flowi6 *fl6 = &inet->cork.fl.u.ip6;
 	unsigned char proto = fl6->flowi6_proto;
 	int err = 0;
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index c1b1bd312df..36c2842a86b 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -162,7 +162,7 @@ static inline void ip6_tnl_dst_store(struct ip6_tnl *t, struct dst_entry *dst)
 	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
 
 static struct ip6_tnl *
-ip6_tnl_lookup(struct net *net, struct in6_addr *remote, struct in6_addr *local)
+ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
 {
 	unsigned int h0 = HASH(remote);
 	unsigned int h1 = HASH(local);
@@ -194,10 +194,10 @@ ip6_tnl_lookup(struct net *net, struct in6_addr *remote, struct in6_addr *local)
  **/
 
 static struct ip6_tnl __rcu **
-ip6_tnl_bucket(struct ip6_tnl_net *ip6n, struct ip6_tnl_parm *p)
+ip6_tnl_bucket(struct ip6_tnl_net *ip6n, const struct ip6_tnl_parm *p)
 {
-	struct in6_addr *remote = &p->raddr;
-	struct in6_addr *local = &p->laddr;
+	const struct in6_addr *remote = &p->raddr;
+	const struct in6_addr *local = &p->laddr;
 	unsigned h = 0;
 	int prio = 0;
 
@@ -280,11 +280,6 @@ static struct ip6_tnl *ip6_tnl_create(struct net *net, struct ip6_tnl_parm *p)
 
 	dev_net_set(dev, net);
 
-	if (strchr(name, '%')) {
-		if (dev_alloc_name(dev, name) < 0)
-			goto failed_free;
-	}
-
 	t = netdev_priv(dev);
 	t->parms = *p;
 	err = ip6_tnl_dev_init(dev);
@@ -321,8 +316,8 @@ failed:
 static struct ip6_tnl *ip6_tnl_locate(struct net *net,
 		struct ip6_tnl_parm *p, int create)
 {
-	struct in6_addr *remote = &p->raddr;
-	struct in6_addr *local = &p->laddr;
+	const struct in6_addr *remote = &p->raddr;
+	const struct in6_addr *local = &p->laddr;
 	struct ip6_tnl __rcu **tp;
 	struct ip6_tnl *t;
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
@@ -374,7 +369,7 @@ ip6_tnl_dev_uninit(struct net_device *dev)
 static __u16
 parse_tlv_tnl_enc_lim(struct sk_buff *skb, __u8 * raw)
 {
-	struct ipv6hdr *ipv6h = (struct ipv6hdr *) raw;
+	const struct ipv6hdr *ipv6h = (const struct ipv6hdr *) raw;
 	__u8 nexthdr = ipv6h->nexthdr;
 	__u16 off = sizeof (*ipv6h);
 
@@ -435,7 +430,7 @@ static int
 ip6_tnl_err(struct sk_buff *skb, __u8 ipproto, struct inet6_skb_parm *opt,
 	    u8 *type, u8 *code, int *msg, __u32 *info, int offset)
 {
-	struct ipv6hdr *ipv6h = (struct ipv6hdr *) skb->data;
+	const struct ipv6hdr *ipv6h = (const struct ipv6hdr *) skb->data;
 	struct ip6_tnl *t;
 	int rel_msg = 0;
 	u8 rel_type = ICMPV6_DEST_UNREACH;
@@ -535,8 +530,9 @@ ip4ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	__u32 rel_info = ntohl(info);
 	int err;
 	struct sk_buff *skb2;
-	struct iphdr *eiph;
+	const struct iphdr *eiph;
 	struct rtable *rt;
+	struct flowi4 fl4;
 
 	err = ip6_tnl_err(skb, IPPROTO_IPIP, opt, &rel_type, &rel_code,
 			  &rel_msg, &rel_info, offset);
@@ -577,7 +573,7 @@ ip4ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	eiph = ip_hdr(skb2);
 
 	/* Try to guess incoming interface */
-	rt = ip_route_output_ports(dev_net(skb->dev), NULL,
+	rt = ip_route_output_ports(dev_net(skb->dev), &fl4, NULL,
 				   eiph->saddr, 0,
 				   0, 0,
 				   IPPROTO_IPIP, RT_TOS(eiph->tos), 0);
@@ -590,7 +586,7 @@ ip4ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	if (rt->rt_flags & RTCF_LOCAL) {
 		ip_rt_put(rt);
 		rt = NULL;
-		rt = ip_route_output_ports(dev_net(skb->dev), NULL,
+		rt = ip_route_output_ports(dev_net(skb->dev), &fl4, NULL,
 					   eiph->daddr, eiph->saddr,
 					   0, 0,
 					   IPPROTO_IPIP,
@@ -669,8 +665,8 @@ ip6ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	return 0;
 }
 
-static void ip4ip6_dscp_ecn_decapsulate(struct ip6_tnl *t,
-					struct ipv6hdr *ipv6h,
+static void ip4ip6_dscp_ecn_decapsulate(const struct ip6_tnl *t,
+					const struct ipv6hdr *ipv6h,
 					struct sk_buff *skb)
 {
 	__u8 dsfield = ipv6_get_dsfield(ipv6h) & ~INET_ECN_MASK;
@@ -682,8 +678,8 @@ static void ip4ip6_dscp_ecn_decapsulate(struct ip6_tnl *t,
 		IP_ECN_set_ce(ip_hdr(skb));
 }
 
-static void ip6ip6_dscp_ecn_decapsulate(struct ip6_tnl *t,
-					struct ipv6hdr *ipv6h,
+static void ip6ip6_dscp_ecn_decapsulate(const struct ip6_tnl *t,
+					const struct ipv6hdr *ipv6h,
 					struct sk_buff *skb)
 {
 	if (t->parms.flags & IP6_TNL_F_RCV_DSCP_COPY)
@@ -726,12 +722,12 @@ static inline int ip6_tnl_rcv_ctl(struct ip6_tnl *t)
 
 static int ip6_tnl_rcv(struct sk_buff *skb, __u16 protocol,
 		       __u8 ipproto,
-		       void (*dscp_ecn_decapsulate)(struct ip6_tnl *t,
-						    struct ipv6hdr *ipv6h,
+		       void (*dscp_ecn_decapsulate)(const struct ip6_tnl *t,
+						    const struct ipv6hdr *ipv6h,
 						    struct sk_buff *skb))
 {
 	struct ip6_tnl *t;
-	struct ipv6hdr *ipv6h = ipv6_hdr(skb);
+	const struct ipv6hdr *ipv6h = ipv6_hdr(skb);
 
 	rcu_read_lock();
 
@@ -828,7 +824,7 @@ static void init_tel_txopt(struct ipv6_tel_txoption *opt, __u8 encap_limit)
  **/
 
 static inline int
-ip6_tnl_addr_conflict(struct ip6_tnl *t, struct ipv6hdr *hdr)
+ip6_tnl_addr_conflict(const struct ip6_tnl *t, const struct ipv6hdr *hdr)
 {
 	return ipv6_addr_equal(&t->parms.raddr, &hdr->saddr);
 }
@@ -1005,7 +1001,7 @@ static inline int
 ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ip6_tnl *t = netdev_priv(dev);
-	struct iphdr  *iph = ip_hdr(skb);
+	const struct iphdr  *iph = ip_hdr(skb);
 	int encap_limit = -1;
 	struct flowi6 fl6;
 	__u8 dsfield;
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 29e48593bf2..82a809901f8 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -989,8 +989,8 @@ static int mif6_add(struct net *net, struct mr6_table *mrt,
 }
 
 static struct mfc6_cache *ip6mr_cache_find(struct mr6_table *mrt,
-					   struct in6_addr *origin,
-					   struct in6_addr *mcastgrp)
+					   const struct in6_addr *origin,
+					   const struct in6_addr *mcastgrp)
 {
 	int line = MFC6_HASH(mcastgrp, origin);
 	struct mfc6_cache *c;
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 85cccd6ed0b..bba658d9a03 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -55,7 +55,7 @@ static void ipcomp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 {
 	struct net *net = dev_net(skb->dev);
 	__be32 spi;
-	struct ipv6hdr *iph = (struct ipv6hdr*)skb->data;
+	const struct ipv6hdr *iph = (const struct ipv6hdr *)skb->data;
 	struct ip_comp_hdr *ipcomph =
 		(struct ip_comp_hdr *)(skb->data + offset);
 	struct xfrm_state *x;
@@ -64,7 +64,8 @@ static void ipcomp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		return;
 
 	spi = htonl(ntohs(ipcomph->cpi));
-	x = xfrm_state_lookup(net, skb->mark, (xfrm_address_t *)&iph->daddr, spi, IPPROTO_COMP, AF_INET6);
+	x = xfrm_state_lookup(net, skb->mark, (const xfrm_address_t *)&iph->daddr,
+			      spi, IPPROTO_COMP, AF_INET6);
 	if (!x)
 		return;
 
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 76b893771e6..3e6ebcdb477 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -92,16 +92,16 @@ static void mld_gq_timer_expire(unsigned long data);
 static void mld_ifc_timer_expire(unsigned long data);
 static void mld_ifc_event(struct inet6_dev *idev);
 static void mld_add_delrec(struct inet6_dev *idev, struct ifmcaddr6 *pmc);
-static void mld_del_delrec(struct inet6_dev *idev, struct in6_addr *addr);
+static void mld_del_delrec(struct inet6_dev *idev, const struct in6_addr *addr);
 static void mld_clear_delrec(struct inet6_dev *idev);
 static int sf_setstate(struct ifmcaddr6 *pmc);
 static void sf_markstate(struct ifmcaddr6 *pmc);
 static void ip6_mc_clear_src(struct ifmcaddr6 *pmc);
-static int ip6_mc_del_src(struct inet6_dev *idev, struct in6_addr *pmca,
-			  int sfmode, int sfcount, struct in6_addr *psfsrc,
+static int ip6_mc_del_src(struct inet6_dev *idev, const struct in6_addr *pmca,
+			  int sfmode, int sfcount, const struct in6_addr *psfsrc,
 			  int delta);
-static int ip6_mc_add_src(struct inet6_dev *idev, struct in6_addr *pmca,
-			  int sfmode, int sfcount, struct in6_addr *psfsrc,
+static int ip6_mc_add_src(struct inet6_dev *idev, const struct in6_addr *pmca,
+			  int sfmode, int sfcount, const struct in6_addr *psfsrc,
 			  int delta);
 static int ip6_mc_leave_src(struct sock *sk, struct ipv6_mc_socklist *iml,
 			    struct inet6_dev *idev);
@@ -201,10 +201,6 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr)
 	return 0;
 }
 
-static void ipv6_mc_socklist_reclaim(struct rcu_head *head)
-{
-	kfree(container_of(head, struct ipv6_mc_socklist, rcu));
-}
 /*
  *	socket leave on multicast group
  */
@@ -239,7 +235,7 @@ int ipv6_sock_mc_drop(struct sock *sk, int ifindex, const struct in6_addr *addr)
 				(void) ip6_mc_leave_src(sk, mc_lst, NULL);
 			rcu_read_unlock();
 			atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
-			call_rcu(&mc_lst->rcu, ipv6_mc_socklist_reclaim);
+			kfree_rcu(mc_lst, rcu);
 			return 0;
 		}
 	}
@@ -250,7 +246,7 @@ int ipv6_sock_mc_drop(struct sock *sk, int ifindex, const struct in6_addr *addr)
 
 /* called with rcu_read_lock() */
 static struct inet6_dev *ip6_mc_find_dev_rcu(struct net *net,
-					     struct in6_addr *group,
+					     const struct in6_addr *group,
 					     int ifindex)
 {
 	struct net_device *dev = NULL;
@@ -307,7 +303,7 @@ void ipv6_sock_mc_close(struct sock *sk)
 		rcu_read_unlock();
 
 		atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
-		call_rcu(&mc_lst->rcu, ipv6_mc_socklist_reclaim);
+		kfree_rcu(mc_lst, rcu);
 
 		spin_lock(&ipv6_sk_mc_lock);
 	}
@@ -451,7 +447,7 @@ done:
 
 int ip6_mc_msfilter(struct sock *sk, struct group_filter *gsf)
 {
-	struct in6_addr *group;
+	const struct in6_addr *group;
 	struct ipv6_mc_socklist *pmc;
 	struct inet6_dev *idev;
 	struct ipv6_pinfo *inet6 = inet6_sk(sk);
@@ -542,7 +538,7 @@ int ip6_mc_msfget(struct sock *sk, struct group_filter *gsf,
 	struct group_filter __user *optval, int __user *optlen)
 {
 	int err, i, count, copycount;
-	struct in6_addr *group;
+	const struct in6_addr *group;
 	struct ipv6_mc_socklist *pmc;
 	struct inet6_dev *idev;
 	struct ipv6_pinfo *inet6 = inet6_sk(sk);
@@ -752,7 +748,7 @@ static void mld_add_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im)
 	spin_unlock_bh(&idev->mc_lock);
 }
 
-static void mld_del_delrec(struct inet6_dev *idev, struct in6_addr *pmca)
+static void mld_del_delrec(struct inet6_dev *idev, const struct in6_addr *pmca)
 {
 	struct ifmcaddr6 *pmc, *pmc_prev;
 	struct ip6_sf_list *psf, *psf_next;
@@ -1052,7 +1048,7 @@ static void igmp6_group_queried(struct ifmcaddr6 *ma, unsigned long resptime)
 
 /* mark EXCLUDE-mode sources */
 static int mld_xmarksources(struct ifmcaddr6 *pmc, int nsrcs,
-	struct in6_addr *srcs)
+	const struct in6_addr *srcs)
 {
 	struct ip6_sf_list *psf;
 	int i, scount;
@@ -1080,7 +1076,7 @@ static int mld_xmarksources(struct ifmcaddr6 *pmc, int nsrcs,
 }
 
 static int mld_marksources(struct ifmcaddr6 *pmc, int nsrcs,
-	struct in6_addr *srcs)
+	const struct in6_addr *srcs)
 {
 	struct ip6_sf_list *psf;
 	int i, scount;
@@ -1115,7 +1111,7 @@ int igmp6_event_query(struct sk_buff *skb)
 {
 	struct mld2_query *mlh2 = NULL;
 	struct ifmcaddr6 *ma;
-	struct in6_addr *group;
+	const struct in6_addr *group;
 	unsigned long max_delay;
 	struct inet6_dev *idev;
 	struct mld_msg *mld;
@@ -1821,7 +1817,7 @@ err_out:
 }
 
 static int ip6_mc_del1_src(struct ifmcaddr6 *pmc, int sfmode,
-	struct in6_addr *psfsrc)
+	const struct in6_addr *psfsrc)
 {
 	struct ip6_sf_list *psf, *psf_prev;
 	int rv = 0;
@@ -1857,8 +1853,8 @@ static int ip6_mc_del1_src(struct ifmcaddr6 *pmc, int sfmode,
 	return rv;
 }
 
-static int ip6_mc_del_src(struct inet6_dev *idev, struct in6_addr *pmca,
-			  int sfmode, int sfcount, struct in6_addr *psfsrc,
+static int ip6_mc_del_src(struct inet6_dev *idev, const struct in6_addr *pmca,
+			  int sfmode, int sfcount, const struct in6_addr *psfsrc,
 			  int delta)
 {
 	struct ifmcaddr6 *pmc;
@@ -1918,7 +1914,7 @@ static int ip6_mc_del_src(struct inet6_dev *idev, struct in6_addr *pmca,
  * Add multicast single-source filter to the interface list
  */
 static int ip6_mc_add1_src(struct ifmcaddr6 *pmc, int sfmode,
-	struct in6_addr *psfsrc, int delta)
+	const struct in6_addr *psfsrc, int delta)
 {
 	struct ip6_sf_list *psf, *psf_prev;
 
@@ -2021,8 +2017,8 @@ static int sf_setstate(struct ifmcaddr6 *pmc)
 /*
  * Add multicast source filter list to the interface list
  */
-static int ip6_mc_add_src(struct inet6_dev *idev, struct in6_addr *pmca,
-			  int sfmode, int sfcount, struct in6_addr *psfsrc,
+static int ip6_mc_add_src(struct inet6_dev *idev, const struct in6_addr *pmca,
+			  int sfmode, int sfcount, const struct in6_addr *psfsrc,
 			  int delta)
 {
 	struct ifmcaddr6 *pmc;
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index 9b210482fb0..43242e6e610 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -126,7 +126,7 @@ static struct mip6_report_rate_limiter mip6_report_rl = {
 
 static int mip6_destopt_input(struct xfrm_state *x, struct sk_buff *skb)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct ipv6_destopt_hdr *destopt = (struct ipv6_destopt_hdr *)skb->data;
 	int err = destopt->nexthdr;
 
@@ -181,8 +181,8 @@ static int mip6_destopt_output(struct xfrm_state *x, struct sk_buff *skb)
 }
 
 static inline int mip6_report_rl_allow(struct timeval *stamp,
-				       struct in6_addr *dst,
-				       struct in6_addr *src, int iif)
+				       const struct in6_addr *dst,
+				       const struct in6_addr *src, int iif)
 {
 	int allow = 0;
 
@@ -349,7 +349,7 @@ static const struct xfrm_type mip6_destopt_type =
 
 static int mip6_rthdr_input(struct xfrm_state *x, struct sk_buff *skb)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct rt2_hdr *rt2 = (struct rt2_hdr *)skb->data;
 	int err = rt2->rt_hdr.nexthdr;
 
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 92f952d093d..7596f071d30 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -324,7 +324,7 @@ static inline u8 *ndisc_opt_addr_data(struct nd_opt_hdr *p,
 	return lladdr + prepad;
 }
 
-int ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int dir)
+int ndisc_mc_map(const struct in6_addr *addr, char *buf, struct net_device *dev, int dir)
 {
 	switch (dev->type) {
 	case ARPHRD_ETHER:
@@ -611,6 +611,29 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh,
 		     inc_opt ? ND_OPT_TARGET_LL_ADDR : 0);
 }
 
+static void ndisc_send_unsol_na(struct net_device *dev)
+{
+	struct inet6_dev *idev;
+	struct inet6_ifaddr *ifa;
+	struct in6_addr mcaddr;
+
+	idev = in6_dev_get(dev);
+	if (!idev)
+		return;
+
+	read_lock_bh(&idev->lock);
+	list_for_each_entry(ifa, &idev->addr_list, if_list) {
+		addrconf_addr_solict_mult(&ifa->addr, &mcaddr);
+		ndisc_send_na(dev, NULL, &mcaddr, &ifa->addr,
+			      /*router=*/ !!idev->cnf.forwarding,
+			      /*solicited=*/ false, /*override=*/ true,
+			      /*inc_opt=*/ true);
+	}
+	read_unlock_bh(&idev->lock);
+
+	in6_dev_put(idev);
+}
+
 void ndisc_send_ns(struct net_device *dev, struct neighbour *neigh,
 		   const struct in6_addr *solicit,
 		   const struct in6_addr *daddr, const struct in6_addr *saddr)
@@ -725,8 +748,8 @@ static int pndisc_is_router(const void *pkey,
 static void ndisc_recv_ns(struct sk_buff *skb)
 {
 	struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
-	struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
-	struct in6_addr *daddr = &ipv6_hdr(skb)->daddr;
+	const struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
+	const struct in6_addr *daddr = &ipv6_hdr(skb)->daddr;
 	u8 *lladdr = NULL;
 	u32 ndoptlen = skb->tail - (skb->transport_header +
 				    offsetof(struct nd_msg, opt));
@@ -901,8 +924,8 @@ out:
 static void ndisc_recv_na(struct sk_buff *skb)
 {
 	struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
-	struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
-	struct in6_addr *daddr = &ipv6_hdr(skb)->daddr;
+	const struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
+	const struct in6_addr *daddr = &ipv6_hdr(skb)->daddr;
 	u8 *lladdr = NULL;
 	u32 ndoptlen = skb->tail - (skb->transport_header +
 				    offsetof(struct nd_msg, opt));
@@ -945,9 +968,10 @@ static void ndisc_recv_na(struct sk_buff *skb)
 	}
 	ifp = ipv6_get_ifaddr(dev_net(dev), &msg->target, dev, 1);
 	if (ifp) {
-		if (ifp->flags & IFA_F_TENTATIVE) {
-			addrconf_dad_failure(ifp);
-			return;
+		if (skb->pkt_type != PACKET_LOOPBACK
+		    && (ifp->flags & IFA_F_TENTATIVE)) {
+				addrconf_dad_failure(ifp);
+				return;
 		}
 		/* What should we make now? The advertisement
 		   is invalid, but ndisc specs say nothing
@@ -1014,7 +1038,7 @@ static void ndisc_recv_rs(struct sk_buff *skb)
 	unsigned long ndoptlen = skb->len - sizeof(*rs_msg);
 	struct neighbour *neigh;
 	struct inet6_dev *idev;
-	struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
+	const struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
 	struct ndisc_options ndopts;
 	u8 *lladdr = NULL;
 
@@ -1411,8 +1435,8 @@ static void ndisc_redirect_rcv(struct sk_buff *skb)
 {
 	struct inet6_dev *in6_dev;
 	struct icmp6hdr *icmph;
-	struct in6_addr *dest;
-	struct in6_addr *target;	/* new first hop to destination */
+	const struct in6_addr *dest;
+	const struct in6_addr *target;	/* new first hop to destination */
 	struct neighbour *neigh;
 	int on_link = 0;
 	struct ndisc_options ndopts;
@@ -1445,7 +1469,7 @@ static void ndisc_redirect_rcv(struct sk_buff *skb)
 	}
 
 	icmph = icmp6_hdr(skb);
-	target = (struct in6_addr *) (icmph + 1);
+	target = (const struct in6_addr *) (icmph + 1);
 	dest = target + 1;
 
 	if (ipv6_addr_is_multicast(dest)) {
@@ -1722,6 +1746,9 @@ static int ndisc_netdev_event(struct notifier_block *this, unsigned long event,
 		neigh_ifdown(&nd_tbl, dev);
 		fib6_run_gc(~0UL, net);
 		break;
+	case NETDEV_NOTIFY_PEERS:
+		ndisc_send_unsol_na(dev);
+		break;
 	default:
 		break;
 	}
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 39aaca2b4fd..30fcee46544 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -13,7 +13,7 @@
 int ip6_route_me_harder(struct sk_buff *skb)
 {
 	struct net *net = dev_net(skb_dst(skb)->dev);
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct dst_entry *dst;
 	struct flowi6 fl6 = {
 		.flowi6_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0,
@@ -67,7 +67,7 @@ static void nf_ip6_saveroute(const struct sk_buff *skb,
 	struct ip6_rt_info *rt_info = nf_queue_entry_reroute(entry);
 
 	if (entry->hook == NF_INET_LOCAL_OUT) {
-		struct ipv6hdr *iph = ipv6_hdr(skb);
+		const struct ipv6hdr *iph = ipv6_hdr(skb);
 
 		rt_info->daddr = iph->daddr;
 		rt_info->saddr = iph->saddr;
@@ -81,7 +81,7 @@ static int nf_ip6_reroute(struct sk_buff *skb,
 	struct ip6_rt_info *rt_info = nf_queue_entry_reroute(entry);
 
 	if (entry->hook == NF_INET_LOCAL_OUT) {
-		struct ipv6hdr *iph = ipv6_hdr(skb);
+		const struct ipv6hdr *iph = ipv6_hdr(skb);
 		if (!ipv6_addr_equal(&iph->daddr, &rt_info->daddr) ||
 		    !ipv6_addr_equal(&iph->saddr, &rt_info->saddr) ||
 		    skb->mark != rt_info->mark)
@@ -90,16 +90,25 @@ static int nf_ip6_reroute(struct sk_buff *skb,
 	return 0;
 }
 
-static int nf_ip6_route(struct dst_entry **dst, struct flowi *fl)
+static int nf_ip6_route(struct net *net, struct dst_entry **dst,
+			struct flowi *fl, bool strict)
 {
-	*dst = ip6_route_output(&init_net, NULL, &fl->u.ip6);
+	static const struct ipv6_pinfo fake_pinfo;
+	static const struct inet_sock fake_sk = {
+		/* makes ip6_route_output set RT6_LOOKUP_F_IFACE: */
+		.sk.sk_bound_dev_if = 1,
+		.pinet6 = (struct ipv6_pinfo *) &fake_pinfo,
+	};
+	const void *sk = strict ? &fake_sk : NULL;
+
+	*dst = ip6_route_output(net, sk, &fl->u.ip6);
 	return (*dst)->error;
 }
 
 __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook,
 			     unsigned int dataoff, u_int8_t protocol)
 {
-	struct ipv6hdr *ip6h = ipv6_hdr(skb);
+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
 	__sum16 csum = 0;
 
 	switch (skb->ip_summed) {
@@ -133,7 +142,7 @@ static __sum16 nf_ip6_checksum_partial(struct sk_buff *skb, unsigned int hook,
 				       unsigned int dataoff, unsigned int len,
 				       u_int8_t protocol)
 {
-	struct ipv6hdr *ip6h = ipv6_hdr(skb);
+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
 	__wsum hsum;
 	__sum16 csum = 0;
 
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 0b2af9b85ce..94874b0bdcd 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -340,6 +340,7 @@ ip6t_do_table(struct sk_buff *skb,
 	unsigned int *stackptr, origptr, cpu;
 	const struct xt_table_info *private;
 	struct xt_action_param acpar;
+	unsigned int addend;
 
 	/* Initialization */
 	indev = in ? in->name : nulldevname;
@@ -358,7 +359,8 @@ ip6t_do_table(struct sk_buff *skb,
 
 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
 
-	xt_info_rdlock_bh();
+	local_bh_disable();
+	addend = xt_write_recseq_begin();
 	private = table->private;
 	cpu        = smp_processor_id();
 	table_base = private->entries[cpu];
@@ -442,7 +444,9 @@ ip6t_do_table(struct sk_buff *skb,
 	} while (!acpar.hotdrop);
 
 	*stackptr = origptr;
-	xt_info_rdunlock_bh();
+
+ 	xt_write_recseq_end(addend);
+ 	local_bh_enable();
 
 #ifdef DEBUG_ALLOW_ALL
 	return NF_ACCEPT;
@@ -899,7 +903,7 @@ get_counters(const struct xt_table_info *t,
 	unsigned int i;
 
 	for_each_possible_cpu(cpu) {
-		seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
+		seqcount_t *s = &per_cpu(xt_recseq, cpu);
 
 		i = 0;
 		xt_entry_foreach(iter, t->entries[cpu], t->size) {
@@ -907,10 +911,10 @@ get_counters(const struct xt_table_info *t,
 			unsigned int start;
 
 			do {
-				start = read_seqbegin(lock);
+				start = read_seqcount_begin(s);
 				bcnt = iter->counters.bcnt;
 				pcnt = iter->counters.pcnt;
-			} while (read_seqretry(lock, start));
+			} while (read_seqcount_retry(s, start));
 
 			ADD_COUNTER(counters[i], bcnt, pcnt);
 			++i;
@@ -1325,6 +1329,7 @@ do_add_counters(struct net *net, const void __user *user, unsigned int len,
 	int ret = 0;
 	const void *loc_cpu_entry;
 	struct ip6t_entry *iter;
+	unsigned int addend;
 #ifdef CONFIG_COMPAT
 	struct compat_xt_counters_info compat_tmp;
 
@@ -1381,13 +1386,13 @@ do_add_counters(struct net *net, const void __user *user, unsigned int len,
 	i = 0;
 	/* Choose the copy that is on our node */
 	curcpu = smp_processor_id();
-	xt_info_wrlock(curcpu);
+	addend = xt_write_recseq_begin();
 	loc_cpu_entry = private->entries[curcpu];
 	xt_entry_foreach(iter, loc_cpu_entry, private->size) {
 		ADD_COUNTER(iter->counters, paddc[i].bcnt, paddc[i].pcnt);
 		++i;
 	}
-	xt_info_wrunlock(curcpu);
+	xt_write_recseq_end(addend);
 
  unlock_up_free:
 	local_bh_enable();
@@ -1578,7 +1583,6 @@ compat_copy_entry_from_user(struct compat_ip6t_entry *e, void **dstptr,
 			    struct xt_table_info *newinfo, unsigned char *base)
 {
 	struct xt_entry_target *t;
-	struct xt_target *target;
 	struct ip6t_entry *de;
 	unsigned int origsize;
 	int ret, h;
@@ -1600,7 +1604,6 @@ compat_copy_entry_from_user(struct compat_ip6t_entry *e, void **dstptr,
 	}
 	de->target_offset = e->target_offset - (origsize - *size);
 	t = compat_ip6t_get_target(e);
-	target = t->u.kernel.target;
 	xt_compat_target_from_user(t, dstptr, size);
 
 	de->next_offset = e->next_offset - (origsize - *size);
@@ -2248,7 +2251,7 @@ static int __init ip6_tables_init(void)
 	if (ret < 0)
 		goto err1;
 
-	/* Noone else will be downing sem now, so we won't sleep */
+	/* No one else will be downing sem now, so we won't sleep */
 	ret = xt_register_targets(ip6t_builtin_tg, ARRAY_SIZE(ip6t_builtin_tg));
 	if (ret < 0)
 		goto err2;
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index 28e74488a32..a5a4c5dd539 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -45,6 +45,8 @@ static void send_reset(struct net *net, struct sk_buff *oldskb)
 	int tcphoff, needs_ack;
 	const struct ipv6hdr *oip6h = ipv6_hdr(oldskb);
 	struct ipv6hdr *ip6h;
+#define DEFAULT_TOS_VALUE	0x0U
+	const __u8 tclass = DEFAULT_TOS_VALUE;
 	struct dst_entry *dst = NULL;
 	u8 proto;
 	struct flowi6 fl6;
@@ -124,7 +126,7 @@ static void send_reset(struct net *net, struct sk_buff *oldskb)
 	skb_put(nskb, sizeof(struct ipv6hdr));
 	skb_reset_network_header(nskb);
 	ip6h = ipv6_hdr(nskb);
-	ip6h->version = 6;
+	*(__be32 *)ip6h =  htonl(0x60000000 | (tclass << 20));
 	ip6h->hop_limit = ip6_dst_hoplimit(dst);
 	ip6h->nexthdr = IPPROTO_TCP;
 	ipv6_addr_copy(&ip6h->saddr, &oip6h->daddr);
diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c
index 679a0a3b7b3..00d19173db7 100644
--- a/net/ipv6/netfilter/ip6table_mangle.c
+++ b/net/ipv6/netfilter/ip6table_mangle.c
@@ -64,7 +64,8 @@ ip6t_mangle_out(struct sk_buff *skb, const struct net_device *out)
 	    (memcmp(&ipv6_hdr(skb)->saddr, &saddr, sizeof(saddr)) ||
 	     memcmp(&ipv6_hdr(skb)->daddr, &daddr, sizeof(daddr)) ||
 	     skb->mark != mark ||
-	     ipv6_hdr(skb)->hop_limit != hop_limit))
+	     ipv6_hdr(skb)->hop_limit != hop_limit ||
+	     flowlabel != *((u_int32_t *)ipv6_hdr(skb))))
 		return ip6_route_me_harder(skb) == 0 ? ret : NF_DROP;
 
 	return ret;
diff --git a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
index 97c5b21b967..cdd6d045e42 100644
--- a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
+++ b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
@@ -71,7 +71,7 @@ static unsigned int ipv6_defrag(unsigned int hooknum,
 	if (reasm == NULL)
 		return NF_STOLEN;
 
-	/* error occured or not fragmented */
+	/* error occurred or not fragmented */
 	if (reasm == skb)
 		return NF_ACCEPT;
 
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 24b3558b8e6..18ff5df7ec0 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -141,7 +141,11 @@ static const struct snmp_mib snmp6_udplite6_list[] = {
 	SNMP_MIB_SENTINEL
 };
 
-static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void __percpu **mib)
+/* can be called either with percpu mib (pcpumib != NULL),
+ * or shared one (smib != NULL)
+ */
+static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void __percpu **pcpumib,
+				     atomic_long_t *smib)
 {
 	char name[32];
 	int i;
@@ -158,14 +162,14 @@ static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void __percpu **mib)
 		snprintf(name, sizeof(name), "Icmp6%s%s",
 			i & 0x100 ? "Out" : "In", p);
 		seq_printf(seq, "%-32s\t%lu\n", name,
-			snmp_fold_field(mib, i));
+			pcpumib ? snmp_fold_field(pcpumib, i) : atomic_long_read(smib + i));
 	}
 
 	/* print by number (nonzero only) - ICMPMsgStat format */
 	for (i = 0; i < ICMP6MSG_MIB_MAX; i++) {
 		unsigned long val;
 
-		val = snmp_fold_field(mib, i);
+		val = pcpumib ? snmp_fold_field(pcpumib, i) : atomic_long_read(smib + i);
 		if (!val)
 			continue;
 		snprintf(name, sizeof(name), "Icmp6%sType%u",
@@ -174,14 +178,22 @@ static void snmp6_seq_show_icmpv6msg(struct seq_file *seq, void __percpu **mib)
 	}
 }
 
-static void snmp6_seq_show_item(struct seq_file *seq, void __percpu **mib,
+/* can be called either with percpu mib (pcpumib != NULL),
+ * or shared one (smib != NULL)
+ */
+static void snmp6_seq_show_item(struct seq_file *seq, void __percpu **pcpumib,
+				atomic_long_t *smib,
 				const struct snmp_mib *itemlist)
 {
 	int i;
+	unsigned long val;
 
-	for (i = 0; itemlist[i].name; i++)
-		seq_printf(seq, "%-32s\t%lu\n", itemlist[i].name,
-			   snmp_fold_field(mib, itemlist[i].entry));
+	for (i = 0; itemlist[i].name; i++) {
+		val = pcpumib ?
+			snmp_fold_field(pcpumib, itemlist[i].entry) :
+			atomic_long_read(smib + itemlist[i].entry);
+		seq_printf(seq, "%-32s\t%lu\n", itemlist[i].name, val);
+	}
 }
 
 static void snmp6_seq_show_item64(struct seq_file *seq, void __percpu **mib,
@@ -201,13 +213,13 @@ static int snmp6_seq_show(struct seq_file *seq, void *v)
 	snmp6_seq_show_item64(seq, (void __percpu **)net->mib.ipv6_statistics,
 			    snmp6_ipstats_list, offsetof(struct ipstats_mib, syncp));
 	snmp6_seq_show_item(seq, (void __percpu **)net->mib.icmpv6_statistics,
-			    snmp6_icmp6_list);
+			    NULL, snmp6_icmp6_list);
 	snmp6_seq_show_icmpv6msg(seq,
-			    (void __percpu **)net->mib.icmpv6msg_statistics);
+			    (void __percpu **)net->mib.icmpv6msg_statistics, NULL);
 	snmp6_seq_show_item(seq, (void __percpu **)net->mib.udp_stats_in6,
-			    snmp6_udp6_list);
+			    NULL, snmp6_udp6_list);
 	snmp6_seq_show_item(seq, (void __percpu **)net->mib.udplite_stats_in6,
-			    snmp6_udplite6_list);
+			    NULL, snmp6_udplite6_list);
 	return 0;
 }
 
@@ -229,11 +241,11 @@ static int snmp6_dev_seq_show(struct seq_file *seq, void *v)
 	struct inet6_dev *idev = (struct inet6_dev *)seq->private;
 
 	seq_printf(seq, "%-32s\t%u\n", "ifIndex", idev->dev->ifindex);
-	snmp6_seq_show_item(seq, (void __percpu **)idev->stats.ipv6,
+	snmp6_seq_show_item(seq, (void __percpu **)idev->stats.ipv6, NULL,
 			    snmp6_ipstats_list);
-	snmp6_seq_show_item(seq, (void __percpu **)idev->stats.icmpv6,
+	snmp6_seq_show_item(seq, NULL, idev->stats.icmpv6dev->mibs,
 			    snmp6_icmp6_list);
-	snmp6_seq_show_icmpv6msg(seq, (void __percpu **)idev->stats.icmpv6msg);
+	snmp6_seq_show_icmpv6msg(seq, NULL, idev->stats.icmpv6msgdev->mibs);
 	return 0;
 }
 
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 4a1c3b46c56..ae64984f81a 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -67,8 +67,8 @@ static struct raw_hashinfo raw_v6_hashinfo = {
 };
 
 static struct sock *__raw_v6_lookup(struct net *net, struct sock *sk,
-		unsigned short num, struct in6_addr *loc_addr,
-		struct in6_addr *rmt_addr, int dif)
+		unsigned short num, const struct in6_addr *loc_addr,
+		const struct in6_addr *rmt_addr, int dif)
 {
 	struct hlist_node *node;
 	int is_multicast = ipv6_addr_is_multicast(loc_addr);
@@ -154,8 +154,8 @@ EXPORT_SYMBOL(rawv6_mh_filter_unregister);
  */
 static int ipv6_raw_deliver(struct sk_buff *skb, int nexthdr)
 {
-	struct in6_addr *saddr;
-	struct in6_addr *daddr;
+	const struct in6_addr *saddr;
+	const struct in6_addr *daddr;
 	struct sock *sk;
 	int delivered = 0;
 	__u8 hash;
@@ -348,7 +348,7 @@ void raw6_icmp_error(struct sk_buff *skb, int nexthdr,
 {
 	struct sock *sk;
 	int hash;
-	struct in6_addr *saddr, *daddr;
+	const struct in6_addr *saddr, *daddr;
 	struct net *net;
 
 	hash = nexthdr & (RAW_HTABLE_SIZE - 1);
@@ -357,7 +357,7 @@ void raw6_icmp_error(struct sk_buff *skb, int nexthdr,
 	sk = sk_head(&raw_v6_hashinfo.ht[hash]);
 	if (sk != NULL) {
 		/* Note: ipv6_hdr(skb) != skb->data */
-		struct ipv6hdr *ip6h = (struct ipv6hdr *)skb->data;
+		const struct ipv6hdr *ip6h = (const struct ipv6hdr *)skb->data;
 		saddr = &ip6h->saddr;
 		daddr = &ip6h->daddr;
 		net = dev_net(skb->dev);
@@ -542,8 +542,8 @@ static int rawv6_push_pending_frames(struct sock *sk, struct flowi6 *fl6,
 		goto out;
 
 	offset = rp->offset;
-	total_len = inet_sk(sk)->cork.length - (skb_network_header(skb) -
-						skb->data);
+	total_len = inet_sk(sk)->cork.base.length - (skb_network_header(skb) -
+						     skb->data);
 	if (offset >= total_len - 1) {
 		err = -EINVAL;
 		ip6_flush_pending_frames(sk);
@@ -1231,7 +1231,7 @@ struct proto rawv6_prot = {
 static void raw6_sock_seq_show(struct seq_file *seq, struct sock *sp, int i)
 {
 	struct ipv6_pinfo *np = inet6_sk(sp);
-	struct in6_addr *dest, *src;
+	const struct in6_addr *dest, *src;
 	__u16 destp, srcp;
 
 	dest  = &np->daddr;
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 07beeb06f75..7b954e2539d 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -224,7 +224,7 @@ out:
 }
 
 static __inline__ struct frag_queue *
-fq_find(struct net *net, __be32 id, struct in6_addr *src, struct in6_addr *dst)
+fq_find(struct net *net, __be32 id, const struct in6_addr *src, const struct in6_addr *dst)
 {
 	struct inet_frag_queue *q;
 	struct ip6_create_arg arg;
@@ -535,7 +535,7 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
 {
 	struct frag_hdr *fhdr;
 	struct frag_queue *fq;
-	struct ipv6hdr *hdr = ipv6_hdr(skb);
+	const struct ipv6hdr *hdr = ipv6_hdr(skb);
 	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMREQDS);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 843406f14d7..f1be5c5c85e 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -89,12 +89,12 @@ static void		ip6_rt_update_pmtu(struct dst_entry *dst, u32 mtu);
 
 #ifdef CONFIG_IPV6_ROUTE_INFO
 static struct rt6_info *rt6_add_route_info(struct net *net,
-					   struct in6_addr *prefix, int prefixlen,
-					   struct in6_addr *gwaddr, int ifindex,
+					   const struct in6_addr *prefix, int prefixlen,
+					   const struct in6_addr *gwaddr, int ifindex,
 					   unsigned pref);
 static struct rt6_info *rt6_get_route_info(struct net *net,
-					   struct in6_addr *prefix, int prefixlen,
-					   struct in6_addr *gwaddr, int ifindex);
+					   const struct in6_addr *prefix, int prefixlen,
+					   const struct in6_addr *gwaddr, int ifindex);
 #endif
 
 static u32 *ipv6_cow_metrics(struct dst_entry *dst, unsigned long old)
@@ -153,6 +153,12 @@ static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu)
 {
 }
 
+static u32 *ip6_rt_blackhole_cow_metrics(struct dst_entry *dst,
+					 unsigned long old)
+{
+	return NULL;
+}
+
 static struct dst_ops ip6_dst_blackhole_ops = {
 	.family			=	AF_INET6,
 	.protocol		=	cpu_to_be16(ETH_P_IPV6),
@@ -161,6 +167,7 @@ static struct dst_ops ip6_dst_blackhole_ops = {
 	.default_mtu		=	ip6_blackhole_default_mtu,
 	.default_advmss		=	ip6_default_advmss,
 	.update_pmtu		=	ip6_rt_blackhole_update_pmtu,
+	.cow_metrics		=	ip6_rt_blackhole_cow_metrics,
 };
 
 static const u32 ip6_template_metrics[RTAX_MAX] = {
@@ -220,9 +227,14 @@ static struct rt6_info ip6_blk_hole_entry_template = {
 #endif
 
 /* allocate dst with ip6_dst_ops */
-static inline struct rt6_info *ip6_dst_alloc(struct dst_ops *ops)
+static inline struct rt6_info *ip6_dst_alloc(struct dst_ops *ops,
+					     struct net_device *dev)
 {
-	return (struct rt6_info *)dst_alloc(ops, 0);
+	struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, 0);
+
+	memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry));
+
+	return rt;
 }
 
 static void ip6_dst_destroy(struct dst_entry *dst)
@@ -283,7 +295,7 @@ static __inline__ int rt6_check_expired(const struct rt6_info *rt)
 		time_after(jiffies, rt->rt6i_expires);
 }
 
-static inline int rt6_need_strict(struct in6_addr *daddr)
+static inline int rt6_need_strict(const struct in6_addr *daddr)
 {
 	return ipv6_addr_type(daddr) &
 		(IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK);
@@ -295,7 +307,7 @@ static inline int rt6_need_strict(struct in6_addr *daddr)
 
 static inline struct rt6_info *rt6_device_match(struct net *net,
 						    struct rt6_info *rt,
-						    struct in6_addr *saddr,
+						    const struct in6_addr *saddr,
 						    int oif,
 						    int flags)
 {
@@ -507,7 +519,7 @@ static struct rt6_info *rt6_select(struct fib6_node *fn, int oif, int strict)
 
 #ifdef CONFIG_IPV6_ROUTE_INFO
 int rt6_route_rcv(struct net_device *dev, u8 *opt, int len,
-		  struct in6_addr *gwaddr)
+		  const struct in6_addr *gwaddr)
 {
 	struct net *net = dev_net(dev);
 	struct route_info *rinfo = (struct route_info *) opt;
@@ -670,8 +682,8 @@ int ip6_ins_rt(struct rt6_info *rt)
 	return __ip6_ins_rt(rt, &info);
 }
 
-static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, struct in6_addr *daddr,
-				      struct in6_addr *saddr)
+static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, const struct in6_addr *daddr,
+				      const struct in6_addr *saddr)
 {
 	struct rt6_info *rt;
 
@@ -739,7 +751,7 @@ static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, struct in6_addr *dad
 	return rt;
 }
 
-static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort, struct in6_addr *daddr)
+static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort, const struct in6_addr *daddr)
 {
 	struct rt6_info *rt = ip6_rt_copy(ort);
 	if (rt) {
@@ -830,7 +842,7 @@ static struct rt6_info *ip6_pol_route_input(struct net *net, struct fib6_table *
 
 void ip6_route_input(struct sk_buff *skb)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct net *net = dev_net(skb->dev);
 	int flags = RT6_LOOKUP_F_HAS_SADDR;
 	struct flowi6 fl6 = {
@@ -874,11 +886,13 @@ EXPORT_SYMBOL(ip6_route_output);
 
 struct dst_entry *ip6_blackhole_route(struct net *net, struct dst_entry *dst_orig)
 {
-	struct rt6_info *rt = dst_alloc(&ip6_dst_blackhole_ops, 1);
-	struct rt6_info *ort = (struct rt6_info *) dst_orig;
+	struct rt6_info *rt, *ort = (struct rt6_info *) dst_orig;
 	struct dst_entry *new = NULL;
 
+	rt = dst_alloc(&ip6_dst_blackhole_ops, ort->dst.dev, 1, 0, 0);
 	if (rt) {
+		memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry));
+
 		new = &rt->dst;
 
 		new->__use = 1;
@@ -886,9 +900,6 @@ struct dst_entry *ip6_blackhole_route(struct net *net, struct dst_entry *dst_ori
 		new->output = dst_discard;
 
 		dst_copy_metrics(new, &ort->dst);
-		new->dev = ort->dst.dev;
-		if (new->dev)
-			dev_hold(new->dev);
 		rt->rt6i_idev = ort->rt6i_idev;
 		if (rt->rt6i_idev)
 			in6_dev_hold(rt->rt6i_idev);
@@ -1031,13 +1042,12 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
 	if (unlikely(idev == NULL))
 		return NULL;
 
-	rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
+	rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, dev);
 	if (unlikely(rt == NULL)) {
 		in6_dev_put(idev);
 		goto out;
 	}
 
-	dev_hold(dev);
 	if (neigh)
 		neigh_hold(neigh);
 	else {
@@ -1046,7 +1056,6 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
 			neigh = NULL;
 	}
 
-	rt->rt6i_dev	  = dev;
 	rt->rt6i_idev     = idev;
 	rt->rt6i_nexthop  = neigh;
 	atomic_set(&rt->dst.__refcnt, 1);
@@ -1205,7 +1214,7 @@ int ip6_route_add(struct fib6_config *cfg)
 		goto out;
 	}
 
-	rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
+	rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, NULL);
 
 	if (rt == NULL) {
 		err = -ENOMEM;
@@ -1272,7 +1281,7 @@ int ip6_route_add(struct fib6_config *cfg)
 	}
 
 	if (cfg->fc_flags & RTF_GATEWAY) {
-		struct in6_addr *gw_addr;
+		const struct in6_addr *gw_addr;
 		int gwa_type;
 
 		gw_addr = &cfg->fc_gateway;
@@ -1325,6 +1334,16 @@ int ip6_route_add(struct fib6_config *cfg)
 	if (dev == NULL)
 		goto out;
 
+	if (!ipv6_addr_any(&cfg->fc_prefsrc)) {
+		if (!ipv6_chk_addr(net, &cfg->fc_prefsrc, dev, 0)) {
+			err = -EINVAL;
+			goto out;
+		}
+		ipv6_addr_copy(&rt->rt6i_prefsrc.addr, &cfg->fc_prefsrc);
+		rt->rt6i_prefsrc.plen = 128;
+	} else
+		rt->rt6i_prefsrc.plen = 0;
+
 	if (cfg->fc_flags & (RTF_GATEWAY | RTF_NONEXTHOP)) {
 		rt->rt6i_nexthop = __neigh_lookup_errno(&nd_tbl, &rt->rt6i_gateway, dev);
 		if (IS_ERR(rt->rt6i_nexthop)) {
@@ -1502,9 +1521,9 @@ out:
 	return rt;
 };
 
-static struct rt6_info *ip6_route_redirect(struct in6_addr *dest,
-					   struct in6_addr *src,
-					   struct in6_addr *gateway,
+static struct rt6_info *ip6_route_redirect(const struct in6_addr *dest,
+					   const struct in6_addr *src,
+					   const struct in6_addr *gateway,
 					   struct net_device *dev)
 {
 	int flags = RT6_LOOKUP_F_HAS_SADDR;
@@ -1526,8 +1545,8 @@ static struct rt6_info *ip6_route_redirect(struct in6_addr *dest,
 						   flags, __ip6_route_redirect);
 }
 
-void rt6_redirect(struct in6_addr *dest, struct in6_addr *src,
-		  struct in6_addr *saddr,
+void rt6_redirect(const struct in6_addr *dest, const struct in6_addr *src,
+		  const struct in6_addr *saddr,
 		  struct neighbour *neigh, u8 *lladdr, int on_link)
 {
 	struct rt6_info *rt, *nrt = NULL;
@@ -1601,7 +1620,7 @@ out:
  *	i.e. Path MTU discovery
  */
 
-static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
+static void rt6_do_pmtu_disc(const struct in6_addr *daddr, const struct in6_addr *saddr,
 			     struct net *net, u32 pmtu, int ifindex)
 {
 	struct rt6_info *rt, *nrt;
@@ -1686,7 +1705,7 @@ out:
 	dst_release(&rt->dst);
 }
 
-void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
+void rt6_pmtu_discovery(const struct in6_addr *daddr, const struct in6_addr *saddr,
 			struct net_device *dev, u32 pmtu)
 {
 	struct net *net = dev_net(dev);
@@ -1714,7 +1733,8 @@ void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
 static struct rt6_info * ip6_rt_copy(struct rt6_info *ort)
 {
 	struct net *net = dev_net(ort->rt6i_dev);
-	struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
+	struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops,
+					    ort->dst.dev);
 
 	if (rt) {
 		rt->dst.input = ort->dst.input;
@@ -1722,9 +1742,6 @@ static struct rt6_info * ip6_rt_copy(struct rt6_info *ort)
 
 		dst_copy_metrics(&rt->dst, &ort->dst);
 		rt->dst.error = ort->dst.error;
-		rt->dst.dev = ort->dst.dev;
-		if (rt->dst.dev)
-			dev_hold(rt->dst.dev);
 		rt->rt6i_idev = ort->rt6i_idev;
 		if (rt->rt6i_idev)
 			in6_dev_hold(rt->rt6i_idev);
@@ -1746,8 +1763,8 @@ static struct rt6_info * ip6_rt_copy(struct rt6_info *ort)
 
 #ifdef CONFIG_IPV6_ROUTE_INFO
 static struct rt6_info *rt6_get_route_info(struct net *net,
-					   struct in6_addr *prefix, int prefixlen,
-					   struct in6_addr *gwaddr, int ifindex)
+					   const struct in6_addr *prefix, int prefixlen,
+					   const struct in6_addr *gwaddr, int ifindex)
 {
 	struct fib6_node *fn;
 	struct rt6_info *rt = NULL;
@@ -1778,8 +1795,8 @@ out:
 }
 
 static struct rt6_info *rt6_add_route_info(struct net *net,
-					   struct in6_addr *prefix, int prefixlen,
-					   struct in6_addr *gwaddr, int ifindex,
+					   const struct in6_addr *prefix, int prefixlen,
+					   const struct in6_addr *gwaddr, int ifindex,
 					   unsigned pref)
 {
 	struct fib6_config cfg = {
@@ -1807,7 +1824,7 @@ static struct rt6_info *rt6_add_route_info(struct net *net,
 }
 #endif
 
-struct rt6_info *rt6_get_dflt_router(struct in6_addr *addr, struct net_device *dev)
+struct rt6_info *rt6_get_dflt_router(const struct in6_addr *addr, struct net_device *dev)
 {
 	struct rt6_info *rt;
 	struct fib6_table *table;
@@ -1829,7 +1846,7 @@ struct rt6_info *rt6_get_dflt_router(struct in6_addr *addr, struct net_device *d
 	return rt;
 }
 
-struct rt6_info *rt6_add_dflt_router(struct in6_addr *gwaddr,
+struct rt6_info *rt6_add_dflt_router(const struct in6_addr *gwaddr,
 				     struct net_device *dev,
 				     unsigned int pref)
 {
@@ -1994,7 +2011,8 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
 				    int anycast)
 {
 	struct net *net = dev_net(idev->dev);
-	struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
+	struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops,
+					    net->loopback_dev);
 	struct neighbour *neigh;
 
 	if (rt == NULL) {
@@ -2004,15 +2022,12 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
 		return ERR_PTR(-ENOMEM);
 	}
 
-	dev_hold(net->loopback_dev);
 	in6_dev_hold(idev);
 
 	rt->dst.flags = DST_HOST;
 	rt->dst.input = ip6_input;
 	rt->dst.output = ip6_output;
-	rt->rt6i_dev = net->loopback_dev;
 	rt->rt6i_idev = idev;
-	dst_metric_set(&rt->dst, RTAX_HOPLIMIT, -1);
 	rt->dst.obsolete = -1;
 
 	rt->rt6i_flags = RTF_UP | RTF_NONEXTHOP;
@@ -2037,6 +2052,55 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
 	return rt;
 }
 
+int ip6_route_get_saddr(struct net *net,
+			struct rt6_info *rt,
+			const struct in6_addr *daddr,
+			unsigned int prefs,
+			struct in6_addr *saddr)
+{
+	struct inet6_dev *idev = ip6_dst_idev((struct dst_entry*)rt);
+	int err = 0;
+	if (rt->rt6i_prefsrc.plen)
+		ipv6_addr_copy(saddr, &rt->rt6i_prefsrc.addr);
+	else
+		err = ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
+					 daddr, prefs, saddr);
+	return err;
+}
+
+/* remove deleted ip from prefsrc entries */
+struct arg_dev_net_ip {
+	struct net_device *dev;
+	struct net *net;
+	struct in6_addr *addr;
+};
+
+static int fib6_remove_prefsrc(struct rt6_info *rt, void *arg)
+{
+	struct net_device *dev = ((struct arg_dev_net_ip *)arg)->dev;
+	struct net *net = ((struct arg_dev_net_ip *)arg)->net;
+	struct in6_addr *addr = ((struct arg_dev_net_ip *)arg)->addr;
+
+	if (((void *)rt->rt6i_dev == dev || dev == NULL) &&
+	    rt != net->ipv6.ip6_null_entry &&
+	    ipv6_addr_equal(addr, &rt->rt6i_prefsrc.addr)) {
+		/* remove prefsrc entry */
+		rt->rt6i_prefsrc.plen = 0;
+	}
+	return 0;
+}
+
+void rt6_remove_prefsrc(struct inet6_ifaddr *ifp)
+{
+	struct net *net = dev_net(ifp->idev->dev);
+	struct arg_dev_net_ip adni = {
+		.dev = ifp->idev->dev,
+		.net = net,
+		.addr = &ifp->addr,
+	};
+	fib6_clean_all(net, fib6_remove_prefsrc, 0, &adni);
+}
+
 struct arg_dev_net {
 	struct net_device *dev;
 	struct net *net;
@@ -2183,6 +2247,9 @@ static int rtm_to_fib6_config(struct sk_buff *skb, struct nlmsghdr *nlh,
 		nla_memcpy(&cfg->fc_src, tb[RTA_SRC], plen);
 	}
 
+	if (tb[RTA_PREFSRC])
+		nla_memcpy(&cfg->fc_prefsrc, tb[RTA_PREFSRC], 16);
+
 	if (tb[RTA_OIF])
 		cfg->fc_ifindex = nla_get_u32(tb[RTA_OIF]);
 
@@ -2325,13 +2392,17 @@ static int rt6_fill_node(struct net *net,
 #endif
 			NLA_PUT_U32(skb, RTA_IIF, iif);
 	} else if (dst) {
-		struct inet6_dev *idev = ip6_dst_idev(&rt->dst);
 		struct in6_addr saddr_buf;
-		if (ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
-				       dst, 0, &saddr_buf) == 0)
+		if (ip6_route_get_saddr(net, rt, dst, 0, &saddr_buf) == 0)
 			NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
 	}
 
+	if (rt->rt6i_prefsrc.plen) {
+		struct in6_addr saddr_buf;
+		ipv6_addr_copy(&saddr_buf, &rt->rt6i_prefsrc.addr);
+		NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
+	}
+
 	if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0)
 		goto nla_put_failure;
 
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 43b33373adb..1cca5761aea 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -250,11 +250,6 @@ static struct ip_tunnel *ipip6_tunnel_locate(struct net *net,
 
 	dev_net_set(dev, net);
 
-	if (strchr(name, '%')) {
-		if (dev_alloc_name(dev, name) < 0)
-			goto failed_free;
-	}
-
 	nt = netdev_priv(dev);
 
 	nt->parms = *parms;
@@ -401,11 +396,6 @@ out:
 	return err;
 }
 
-static void prl_entry_destroy_rcu(struct rcu_head *head)
-{
-	kfree(container_of(head, struct ip_tunnel_prl_entry, rcu_head));
-}
-
 static void prl_list_destroy_rcu(struct rcu_head *head)
 {
 	struct ip_tunnel_prl_entry *p, *n;
@@ -433,7 +423,7 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 		     p = &x->next) {
 			if (x->addr == a->addr) {
 				*p = x->next;
-				call_rcu(&x->rcu_head, prl_entry_destroy_rcu);
+				kfree_rcu(x, rcu_head);
 				t->prl_count--;
 				goto out;
 			}
@@ -452,7 +442,7 @@ out:
 }
 
 static int
-isatap_chksrc(struct sk_buff *skb, struct iphdr *iph, struct ip_tunnel *t)
+isatap_chksrc(struct sk_buff *skb, const struct iphdr *iph, struct ip_tunnel *t)
 {
 	struct ip_tunnel_prl_entry *p;
 	int ok = 1;
@@ -465,7 +455,8 @@ isatap_chksrc(struct sk_buff *skb, struct iphdr *iph, struct ip_tunnel *t)
 		else
 			skb->ndisc_nodetype = NDISC_NODETYPE_NODEFAULT;
 	} else {
-		struct in6_addr *addr6 = &ipv6_hdr(skb)->saddr;
+		const struct in6_addr *addr6 = &ipv6_hdr(skb)->saddr;
+
 		if (ipv6_addr_is_isatap(addr6) &&
 		    (addr6->s6_addr32[3] == iph->saddr) &&
 		    ipv6_chk_prefix(addr6, t->dev))
@@ -499,7 +490,7 @@ static int ipip6_err(struct sk_buff *skb, u32 info)
    8 bytes of packet payload. It means, that precise relaying of
    ICMP in the real Internet is absolutely infeasible.
  */
-	struct iphdr *iph = (struct iphdr*)skb->data;
+	const struct iphdr *iph = (const struct iphdr *)skb->data;
 	const int type = icmp_hdr(skb)->type;
 	const int code = icmp_hdr(skb)->code;
 	struct ip_tunnel *t;
@@ -557,7 +548,7 @@ out:
 	return err;
 }
 
-static inline void ipip6_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
+static inline void ipip6_ecn_decapsulate(const struct iphdr *iph, struct sk_buff *skb)
 {
 	if (INET_ECN_is_ce(iph->tos))
 		IP6_ECN_set_ce(ipv6_hdr(skb));
@@ -565,7 +556,7 @@ static inline void ipip6_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
 
 static int ipip6_rcv(struct sk_buff *skb)
 {
-	struct iphdr *iph;
+	const struct iphdr *iph;
 	struct ip_tunnel *tunnel;
 
 	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
@@ -621,7 +612,7 @@ out:
  * comes from 6rd / 6to4 (RFC 3056) addr space.
  */
 static inline
-__be32 try_6rd(struct in6_addr *v6dst, struct ip_tunnel *tunnel)
+__be32 try_6rd(const struct in6_addr *v6dst, struct ip_tunnel *tunnel)
 {
 	__be32 dst = 0;
 
@@ -664,8 +655,8 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
 	struct pcpu_tstats *tstats;
-	struct iphdr  *tiph = &tunnel->parms.iph;
-	struct ipv6hdr *iph6 = ipv6_hdr(skb);
+	const struct iphdr  *tiph = &tunnel->parms.iph;
+	const struct ipv6hdr *iph6 = ipv6_hdr(skb);
 	u8     tos = tunnel->parms.iph.tos;
 	__be16 df = tiph->frag_off;
 	struct rtable *rt;     			/* Route to the other host */
@@ -673,8 +664,9 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 	struct iphdr  *iph;			/* Our new IP header */
 	unsigned int max_headroom;		/* The extra header space needed */
 	__be32 dst = tiph->daddr;
+	struct flowi4 fl4;
 	int    mtu;
-	struct in6_addr *addr6;
+	const struct in6_addr *addr6;
 	int addr_type;
 
 	if (skb->protocol != htons(ETH_P_IPV6))
@@ -693,7 +685,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 			goto tx_error;
 		}
 
-		addr6 = (struct in6_addr*)&neigh->primary_key;
+		addr6 = (const struct in6_addr*)&neigh->primary_key;
 		addr_type = ipv6_addr_type(addr6);
 
 		if ((addr_type & IPV6_ADDR_UNICAST) &&
@@ -718,7 +710,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 			goto tx_error;
 		}
 
-		addr6 = (struct in6_addr*)&neigh->primary_key;
+		addr6 = (const struct in6_addr*)&neigh->primary_key;
 		addr_type = ipv6_addr_type(addr6);
 
 		if (addr_type == IPV6_ADDR_ANY) {
@@ -732,7 +724,7 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 		dst = addr6->s6_addr32[3];
 	}
 
-	rt = ip_route_output_ports(dev_net(dev), NULL,
+	rt = ip_route_output_ports(dev_net(dev), &fl4, NULL,
 				   dst, tiph->saddr,
 				   0, 0,
 				   IPPROTO_IPV6, RT_TOS(tos),
@@ -826,8 +818,8 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 	iph->frag_off		=	df;
 	iph->protocol		=	IPPROTO_IPV6;
 	iph->tos		=	INET_ECN_encapsulate(tos, ipv6_get_dsfield(iph6));
-	iph->daddr		=	rt->rt_dst;
-	iph->saddr		=	rt->rt_src;
+	iph->daddr		=	fl4.daddr;
+	iph->saddr		=	fl4.saddr;
 
 	if ((iph->ttl = tiph->ttl) == 0)
 		iph->ttl	=	iph6->hop_limit;
@@ -849,13 +841,14 @@ static void ipip6_tunnel_bind_dev(struct net_device *dev)
 {
 	struct net_device *tdev = NULL;
 	struct ip_tunnel *tunnel;
-	struct iphdr *iph;
+	const struct iphdr *iph;
+	struct flowi4 fl4;
 
 	tunnel = netdev_priv(dev);
 	iph = &tunnel->parms.iph;
 
 	if (iph->daddr) {
-		struct rtable *rt = ip_route_output_ports(dev_net(dev), NULL,
+		struct rtable *rt = ip_route_output_ports(dev_net(dev), &fl4, NULL,
 							  iph->daddr, iph->saddr,
 							  0, 0,
 							  IPPROTO_IPV6,
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 352c26081f5..8b9644a8b69 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -66,7 +66,7 @@ static inline struct sock *get_cookie_sock(struct sock *sk, struct sk_buff *skb,
 static DEFINE_PER_CPU(__u32 [16 + 5 + SHA_WORKSPACE_WORDS],
 		      ipv6_cookie_scratch);
 
-static u32 cookie_hash(struct in6_addr *saddr, struct in6_addr *daddr,
+static u32 cookie_hash(const struct in6_addr *saddr, const struct in6_addr *daddr,
 		       __be16 sport, __be16 dport, u32 count, int c)
 {
 	__u32 *tmp = __get_cpu_var(ipv6_cookie_scratch);
@@ -86,7 +86,8 @@ static u32 cookie_hash(struct in6_addr *saddr, struct in6_addr *daddr,
 	return tmp[17];
 }
 
-static __u32 secure_tcp_syn_cookie(struct in6_addr *saddr, struct in6_addr *daddr,
+static __u32 secure_tcp_syn_cookie(const struct in6_addr *saddr,
+				   const struct in6_addr *daddr,
 				   __be16 sport, __be16 dport, __u32 sseq,
 				   __u32 count, __u32 data)
 {
@@ -96,8 +97,8 @@ static __u32 secure_tcp_syn_cookie(struct in6_addr *saddr, struct in6_addr *dadd
 		& COOKIEMASK));
 }
 
-static __u32 check_tcp_syn_cookie(__u32 cookie, struct in6_addr *saddr,
-				  struct in6_addr *daddr, __be16 sport,
+static __u32 check_tcp_syn_cookie(__u32 cookie, const struct in6_addr *saddr,
+				  const struct in6_addr *daddr, __be16 sport,
 				  __be16 dport, __u32 sseq, __u32 count,
 				  __u32 maxdiff)
 {
@@ -116,7 +117,7 @@ static __u32 check_tcp_syn_cookie(__u32 cookie, struct in6_addr *saddr,
 
 __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mssp)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 	const struct tcphdr *th = tcp_hdr(skb);
 	int mssind;
 	const __u16 mss = *mssp;
@@ -138,7 +139,7 @@ __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mssp)
 
 static inline int cookie_check(struct sk_buff *skb, __u32 cookie)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 	const struct tcphdr *th = tcp_hdr(skb);
 	__u32 seq = ntohl(th->seq) - 1;
 	__u32 mssind = check_tcp_syn_cookie(cookie, &iph->saddr, &iph->daddr,
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 2b0c186862c..868366470b4 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -76,8 +76,8 @@ static void	tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
 
 static int	tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb);
 static void	__tcp_v6_send_check(struct sk_buff *skb,
-				    struct in6_addr *saddr,
-				    struct in6_addr *daddr);
+				    const struct in6_addr *saddr,
+				    const struct in6_addr *daddr);
 
 static const struct inet_connection_sock_af_ops ipv6_mapped;
 static const struct inet_connection_sock_af_ops ipv6_specific;
@@ -86,7 +86,7 @@ static const struct tcp_sock_af_ops tcp_sock_ipv6_specific;
 static const struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific;
 #else
 static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(struct sock *sk,
-						   struct in6_addr *addr)
+						   const struct in6_addr *addr)
 {
 	return NULL;
 }
@@ -106,8 +106,8 @@ static void tcp_v6_hash(struct sock *sk)
 }
 
 static __inline__ __sum16 tcp_v6_check(int len,
-				   struct in6_addr *saddr,
-				   struct in6_addr *daddr,
+				   const struct in6_addr *saddr,
+				   const struct in6_addr *daddr,
 				   __wsum base)
 {
 	return csum_ipv6_magic(saddr, daddr, len, IPPROTO_TCP, base);
@@ -331,7 +331,7 @@ failure:
 static void tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		u8 type, u8 code, int offset, __be32 info)
 {
-	struct ipv6hdr *hdr = (struct ipv6hdr*)skb->data;
+	const struct ipv6hdr *hdr = (const struct ipv6hdr*)skb->data;
 	const struct tcphdr *th = (struct tcphdr *)(skb->data+offset);
 	struct ipv6_pinfo *np;
 	struct sock *sk;
@@ -503,6 +503,7 @@ static int tcp_v6_send_synack(struct sock *sk, struct request_sock *req,
 	dst = ip6_dst_lookup_flow(sk, &fl6, final_p, false);
 	if (IS_ERR(dst)) {
 		err = PTR_ERR(dst);
+		dst = NULL;
 		goto done;
 	}
 	skb = tcp_make_synack(sk, dst, req, rvp);
@@ -550,7 +551,7 @@ static void tcp_v6_reqsk_destructor(struct request_sock *req)
 
 #ifdef CONFIG_TCP_MD5SIG
 static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(struct sock *sk,
-						   struct in6_addr *addr)
+						   const struct in6_addr *addr)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	int i;
@@ -579,7 +580,7 @@ static struct tcp_md5sig_key *tcp_v6_reqsk_md5_lookup(struct sock *sk,
 	return tcp_v6_md5_do_lookup(sk, &inet6_rsk(req)->rmt_addr);
 }
 
-static int tcp_v6_md5_do_add(struct sock *sk, struct in6_addr *peer,
+static int tcp_v6_md5_do_add(struct sock *sk, const struct in6_addr *peer,
 			     char *newkey, u8 newkeylen)
 {
 	/* Add key to the list */
@@ -644,7 +645,7 @@ static int tcp_v6_md5_add_func(struct sock *sk, struct sock *addr_sk,
 				 newkey, newkeylen);
 }
 
-static int tcp_v6_md5_do_del(struct sock *sk, struct in6_addr *peer)
+static int tcp_v6_md5_do_del(struct sock *sk, const struct in6_addr *peer)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	int i;
@@ -752,8 +753,8 @@ static int tcp_v6_parse_md5_keys (struct sock *sk, char __user *optval,
 }
 
 static int tcp_v6_md5_hash_pseudoheader(struct tcp_md5sig_pool *hp,
-					struct in6_addr *daddr,
-					struct in6_addr *saddr, int nbytes)
+					const struct in6_addr *daddr,
+					const struct in6_addr *saddr, int nbytes)
 {
 	struct tcp6_pseudohdr *bp;
 	struct scatterlist sg;
@@ -770,7 +771,7 @@ static int tcp_v6_md5_hash_pseudoheader(struct tcp_md5sig_pool *hp,
 }
 
 static int tcp_v6_md5_hash_hdr(char *md5_hash, struct tcp_md5sig_key *key,
-			       struct in6_addr *daddr, struct in6_addr *saddr,
+			       const struct in6_addr *daddr, struct in6_addr *saddr,
 			       struct tcphdr *th)
 {
 	struct tcp_md5sig_pool *hp;
@@ -806,7 +807,7 @@ static int tcp_v6_md5_hash_skb(char *md5_hash, struct tcp_md5sig_key *key,
 			       struct sock *sk, struct request_sock *req,
 			       struct sk_buff *skb)
 {
-	struct in6_addr *saddr, *daddr;
+	const struct in6_addr *saddr, *daddr;
 	struct tcp_md5sig_pool *hp;
 	struct hash_desc *desc;
 	struct tcphdr *th = tcp_hdr(skb);
@@ -818,7 +819,7 @@ static int tcp_v6_md5_hash_skb(char *md5_hash, struct tcp_md5sig_key *key,
 		saddr = &inet6_rsk(req)->loc_addr;
 		daddr = &inet6_rsk(req)->rmt_addr;
 	} else {
-		struct ipv6hdr *ip6h = ipv6_hdr(skb);
+		const struct ipv6hdr *ip6h = ipv6_hdr(skb);
 		saddr = &ip6h->saddr;
 		daddr = &ip6h->daddr;
 	}
@@ -856,7 +857,7 @@ static int tcp_v6_inbound_md5_hash (struct sock *sk, struct sk_buff *skb)
 {
 	__u8 *hash_location = NULL;
 	struct tcp_md5sig_key *hash_expected;
-	struct ipv6hdr *ip6h = ipv6_hdr(skb);
+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
 	struct tcphdr *th = tcp_hdr(skb);
 	int genhash;
 	u8 newhash[16];
@@ -914,7 +915,7 @@ static const struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
 #endif
 
 static void __tcp_v6_send_check(struct sk_buff *skb,
-				struct in6_addr *saddr, struct in6_addr *daddr)
+				const struct in6_addr *saddr, const struct in6_addr *daddr)
 {
 	struct tcphdr *th = tcp_hdr(skb);
 
@@ -938,7 +939,7 @@ static void tcp_v6_send_check(struct sock *sk, struct sk_buff *skb)
 
 static int tcp_v6_gso_send_check(struct sk_buff *skb)
 {
-	struct ipv6hdr *ipv6h;
+	const struct ipv6hdr *ipv6h;
 	struct tcphdr *th;
 
 	if (!pskb_may_pull(skb, sizeof(*th)))
@@ -956,7 +957,7 @@ static int tcp_v6_gso_send_check(struct sk_buff *skb)
 static struct sk_buff **tcp6_gro_receive(struct sk_buff **head,
 					 struct sk_buff *skb)
 {
-	struct ipv6hdr *iph = skb_gro_network_header(skb);
+	const struct ipv6hdr *iph = skb_gro_network_header(skb);
 
 	switch (skb->ip_summed) {
 	case CHECKSUM_COMPLETE:
@@ -977,7 +978,7 @@ static struct sk_buff **tcp6_gro_receive(struct sk_buff **head,
 
 static int tcp6_gro_complete(struct sk_buff *skb)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct tcphdr *th = tcp_hdr(skb);
 
 	th->check = ~tcp_v6_check(skb->len - skb_transport_offset(skb),
@@ -1468,7 +1469,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 
 	   First: no IPv4 options.
 	 */
-	newinet->opt = NULL;
+	newinet->inet_opt = NULL;
 	newnp->ipv6_fl_list = NULL;
 
 	/* Clone RX bits */
@@ -1621,6 +1622,7 @@ static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb)
 		opt_skb = skb_clone(skb, GFP_ATOMIC);
 
 	if (sk->sk_state == TCP_ESTABLISHED) { /* Fast path */
+		sock_rps_save_rxhash(sk, skb->rxhash);
 		if (tcp_rcv_established(sk, skb, tcp_hdr(skb), skb->len))
 			goto reset;
 		if (opt_skb)
@@ -1648,7 +1650,8 @@ static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb)
 				__kfree_skb(opt_skb);
 			return 0;
 		}
-	}
+	} else
+		sock_rps_save_rxhash(sk, skb->rxhash);
 
 	if (tcp_rcv_state_process(sk, skb, tcp_hdr(skb), skb->len))
 		goto reset;
@@ -1699,7 +1702,7 @@ ipv6_pktoptions:
 static int tcp_v6_rcv(struct sk_buff *skb)
 {
 	struct tcphdr *th;
-	struct ipv6hdr *hdr;
+	const struct ipv6hdr *hdr;
 	struct sock *sk;
 	int ret;
 	struct net *net = dev_net(skb->dev);
@@ -2025,8 +2028,8 @@ static void get_openreq6(struct seq_file *seq,
 			 struct sock *sk, struct request_sock *req, int i, int uid)
 {
 	int ttd = req->expires - jiffies;
-	struct in6_addr *src = &inet6_rsk(req)->loc_addr;
-	struct in6_addr *dest = &inet6_rsk(req)->rmt_addr;
+	const struct in6_addr *src = &inet6_rsk(req)->loc_addr;
+	const struct in6_addr *dest = &inet6_rsk(req)->rmt_addr;
 
 	if (ttd < 0)
 		ttd = 0;
@@ -2054,7 +2057,7 @@ static void get_openreq6(struct seq_file *seq,
 
 static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i)
 {
-	struct in6_addr *dest, *src;
+	const struct in6_addr *dest, *src;
 	__u16 destp, srcp;
 	int timer_active;
 	unsigned long timer_expires;
@@ -2111,7 +2114,7 @@ static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i)
 static void get_timewait6_sock(struct seq_file *seq,
 			       struct inet_timewait_sock *tw, int i)
 {
-	struct in6_addr *dest, *src;
+	const struct in6_addr *dest, *src;
 	__u16 destp, srcp;
 	struct inet6_timewait_sock *tw6 = inet6_twsk((struct sock *)tw);
 	int ttd = tw->tw_ttd - jiffies;
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index d7037c006e1..fc0c42a88e5 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -311,7 +311,7 @@ static struct sock *__udp6_lib_lookup_skb(struct sk_buff *skb,
 					  struct udp_table *udptable)
 {
 	struct sock *sk;
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
@@ -463,9 +463,9 @@ void __udp6_lib_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		    struct udp_table *udptable)
 {
 	struct ipv6_pinfo *np;
-	struct ipv6hdr *hdr = (struct ipv6hdr*)skb->data;
-	struct in6_addr *saddr = &hdr->saddr;
-	struct in6_addr *daddr = &hdr->daddr;
+	const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data;
+	const struct in6_addr *saddr = &hdr->saddr;
+	const struct in6_addr *daddr = &hdr->daddr;
 	struct udphdr *uh = (struct udphdr*)(skb->data+offset);
 	struct sock *sk;
 	int err;
@@ -505,6 +505,9 @@ int udpv6_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
 	int rc;
 	int is_udplite = IS_UDPLITE(sk);
 
+	if (!ipv6_addr_any(&inet6_sk(sk)->daddr))
+		sock_rps_save_rxhash(sk, skb->rxhash);
+
 	if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb))
 		goto drop;
 
@@ -550,8 +553,8 @@ drop_no_sk_drops_inc:
 }
 
 static struct sock *udp_v6_mcast_next(struct net *net, struct sock *sk,
-				      __be16 loc_port, struct in6_addr *loc_addr,
-				      __be16 rmt_port, struct in6_addr *rmt_addr,
+				      __be16 loc_port, const struct in6_addr *loc_addr,
+				      __be16 rmt_port, const struct in6_addr *rmt_addr,
 				      int dif)
 {
 	struct hlist_nulls_node *node;
@@ -630,7 +633,7 @@ drop:
  * so we don't need to lock the hashes.
  */
 static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
-		struct in6_addr *saddr, struct in6_addr *daddr,
+		const struct in6_addr *saddr, const struct in6_addr *daddr,
 		struct udp_table *udptable)
 {
 	struct sock *sk, *stack[256 / sizeof(struct sock *)];
@@ -713,7 +716,7 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 	struct net *net = dev_net(skb->dev);
 	struct sock *sk;
 	struct udphdr *uh;
-	struct in6_addr *saddr, *daddr;
+	const struct in6_addr *saddr, *daddr;
 	u32 ulen = 0;
 
 	if (!pskb_may_pull(skb, sizeof(struct udphdr)))
@@ -1275,7 +1278,7 @@ int compat_udpv6_getsockopt(struct sock *sk, int level, int optname,
 
 static int udp6_ufo_send_check(struct sk_buff *skb)
 {
-	struct ipv6hdr *ipv6h;
+	const struct ipv6hdr *ipv6h;
 	struct udphdr *uh;
 
 	if (!pskb_may_pull(skb, sizeof(*uh)))
@@ -1325,14 +1328,14 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, u32 features)
 	/* Do software UFO. Complete and fill in the UDP checksum as HW cannot
 	 * do checksum of UDP packets sent as multiple IP fragments.
 	 */
-	offset = skb->csum_start - skb_headroom(skb);
+	offset = skb_checksum_start_offset(skb);
 	csum = skb_checksum(skb, offset, skb->len- offset, 0);
 	offset += skb->csum_offset;
 	*(__sum16 *)(skb->data + offset) = csum_fold(csum);
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Check if there is enough headroom to insert fragment header. */
-	if ((skb_headroom(skb) < frag_hdr_sz) &&
+	if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) &&
 	    pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC))
 		goto out;
 
@@ -1379,7 +1382,7 @@ static void udp6_sock_seq_show(struct seq_file *seq, struct sock *sp, int bucket
 {
 	struct inet_sock *inet = inet_sk(sp);
 	struct ipv6_pinfo *np = inet6_sk(sp);
-	struct in6_addr *dest, *src;
+	const struct in6_addr *dest, *src;
 	__u16 destp, srcp;
 
 	dest  = &np->daddr;
diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c
index bbd48b101ba..3437d7d4eed 100644
--- a/net/ipv6/xfrm6_mode_beet.c
+++ b/net/ipv6/xfrm6_mode_beet.c
@@ -41,10 +41,8 @@ static int xfrm6_beet_output(struct xfrm_state *x, struct sk_buff *skb)
 {
 	struct ipv6hdr *top_iph;
 	struct ip_beet_phdr *ph;
-	struct iphdr *iphv4;
 	int optlen, hdr_len;
 
-	iphv4 = ip_hdr(skb);
 	hdr_len = 0;
 	optlen = XFRM_MODE_SKB_CB(skb)->optlen;
 	if (unlikely(optlen))
diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c
index 645cb968d45..4d6edff0498 100644
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -20,7 +20,7 @@
 
 static inline void ipip6_ecn_decapsulate(struct sk_buff *skb)
 {
-	struct ipv6hdr *outer_iph = ipv6_hdr(skb);
+	const struct ipv6hdr *outer_iph = ipv6_hdr(skb);
 	struct ipv6hdr *inner_iph = ipipv6_hdr(skb);
 
 	if (INET_ECN_is_ce(ipv6_get_dsfield(outer_iph)))
@@ -55,8 +55,8 @@ static int xfrm6_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 		dsfield &= ~INET_ECN_MASK;
 	ipv6_change_dsfield(top_iph, 0, dsfield);
 	top_iph->hop_limit = ip6_dst_hoplimit(dst->child);
-	ipv6_addr_copy(&top_iph->saddr, (struct in6_addr *)&x->props.saddr);
-	ipv6_addr_copy(&top_iph->daddr, (struct in6_addr *)&x->id.daddr);
+	ipv6_addr_copy(&top_iph->saddr, (const struct in6_addr *)&x->props.saddr);
+	ipv6_addr_copy(&top_iph->daddr, (const struct in6_addr *)&x->id.daddr);
 	return 0;
 }
 
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 8e688b3de9a..49a91c5f562 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -79,7 +79,7 @@ int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(xfrm6_prepare_output);
 
-static int xfrm6_output_finish(struct sk_buff *skb)
+int xfrm6_output_finish(struct sk_buff *skb)
 {
 #ifdef CONFIG_NETFILTER
 	IP6CB(skb)->flags |= IP6SKB_XFRM_TRANSFORMED;
@@ -97,9 +97,9 @@ static int __xfrm6_output(struct sk_buff *skb)
 	if ((x && x->props.mode == XFRM_MODE_TUNNEL) &&
 	    ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
 		dst_allfrag(skb_dst(skb)))) {
-			return ip6_fragment(skb, xfrm6_output_finish);
+			return ip6_fragment(skb, x->outer_mode->afinfo->output_finish);
 	}
-	return xfrm6_output_finish(skb);
+	return x->outer_mode->afinfo->output_finish(skb);
 }
 
 int xfrm6_output(struct sk_buff *skb)
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 05e34c8ec91..d879f7efbd1 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -124,7 +124,7 @@ _decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
 	struct flowi6 *fl6 = &fl->u.ip6;
 	int onlyproto = 0;
 	u16 offset = skb_network_header_len(skb);
-	struct ipv6hdr *hdr = ipv6_hdr(skb);
+	const struct ipv6hdr *hdr = ipv6_hdr(skb);
 	struct ipv6_opt_hdr *exthdr;
 	const unsigned char *nh = skb_network_header(skb);
 	u8 nexthdr = nh[IP6CB(skb)->nhoff];
diff --git a/net/ipv6/xfrm6_state.c b/net/ipv6/xfrm6_state.c
index afe941e9415..248f0b2a7ee 100644
--- a/net/ipv6/xfrm6_state.c
+++ b/net/ipv6/xfrm6_state.c
@@ -178,6 +178,7 @@ static struct xfrm_state_afinfo xfrm6_state_afinfo = {
 	.tmpl_sort		= __xfrm6_tmpl_sort,
 	.state_sort		= __xfrm6_state_sort,
 	.output			= xfrm6_output,
+	.output_finish		= xfrm6_output_finish,
 	.extract_input		= xfrm6_extract_input,
 	.extract_output		= xfrm6_extract_output,
 	.transport_finish	= xfrm6_transport_finish,
diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index 2969cad408d..a6770a04e3b 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -68,7 +68,7 @@ static DEFINE_SPINLOCK(xfrm6_tunnel_spi_lock);
 
 static struct kmem_cache *xfrm6_tunnel_spi_kmem __read_mostly;
 
-static inline unsigned xfrm6_tunnel_spi_hash_byaddr(xfrm_address_t *addr)
+static inline unsigned xfrm6_tunnel_spi_hash_byaddr(const xfrm_address_t *addr)
 {
 	unsigned h;
 
@@ -85,7 +85,7 @@ static inline unsigned xfrm6_tunnel_spi_hash_byspi(u32 spi)
 	return spi % XFRM6_TUNNEL_SPI_BYSPI_HSIZE;
 }
 
-static struct xfrm6_tunnel_spi *__xfrm6_tunnel_spi_lookup(struct net *net, xfrm_address_t *saddr)
+static struct xfrm6_tunnel_spi *__xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr)
 {
 	struct xfrm6_tunnel_net *xfrm6_tn = xfrm6_tunnel_pernet(net);
 	struct xfrm6_tunnel_spi *x6spi;
@@ -101,7 +101,7 @@ static struct xfrm6_tunnel_spi *__xfrm6_tunnel_spi_lookup(struct net *net, xfrm_
 	return NULL;
 }
 
-__be32 xfrm6_tunnel_spi_lookup(struct net *net, xfrm_address_t *saddr)
+__be32 xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr)
 {
 	struct xfrm6_tunnel_spi *x6spi;
 	u32 spi;
@@ -237,10 +237,10 @@ static int xfrm6_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
 static int xfrm6_tunnel_rcv(struct sk_buff *skb)
 {
 	struct net *net = dev_net(skb->dev);
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	const struct ipv6hdr *iph = ipv6_hdr(skb);
 	__be32 spi;
 
-	spi = xfrm6_tunnel_spi_lookup(net, (xfrm_address_t *)&iph->saddr);
+	spi = xfrm6_tunnel_spi_lookup(net, (const xfrm_address_t *)&iph->saddr);
 	return xfrm6_rcv_spi(skb, IPPROTO_IPV6, spi) > 0 ? : 0;
 }
 
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index c9890e25cd4..cc616974a44 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1297,8 +1297,7 @@ static int irda_sendmsg(struct kiocb *iocb, struct socket *sock,
 	/* Note : socket.c set MSG_EOR on SEQPACKET sockets */
 	if (msg->msg_flags & ~(MSG_DONTWAIT | MSG_EOR | MSG_CMSG_COMPAT |
 			       MSG_NOSIGNAL)) {
-		err = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	lock_sock(sk);
diff --git a/net/irda/ircomm/ircomm_core.c b/net/irda/ircomm/ircomm_core.c
index e97082017f4..52079f19bbb 100644
--- a/net/irda/ircomm/ircomm_core.c
+++ b/net/irda/ircomm/ircomm_core.c
@@ -244,14 +244,8 @@ EXPORT_SYMBOL(ircomm_connect_request);
 void ircomm_connect_indication(struct ircomm_cb *self, struct sk_buff *skb,
 			       struct ircomm_info *info)
 {
-	int clen = 0;
-
 	IRDA_DEBUG(2, "%s()\n", __func__ );
 
-	/* Check if the packet contains data on the control channel */
-	if (skb->len > 0)
-		clen = skb->data[0];
-
 	/*
 	 * If there are any data hiding in the control channel, we must
 	 * deliver it first. The side effect is that the control channel
diff --git a/net/irda/ircomm/ircomm_lmp.c b/net/irda/ircomm/ircomm_lmp.c
index 08fb54dc8c4..3b8095c771d 100644
--- a/net/irda/ircomm/ircomm_lmp.c
+++ b/net/irda/ircomm/ircomm_lmp.c
@@ -75,7 +75,6 @@ static int ircomm_lmp_connect_response(struct ircomm_cb *self,
 				       struct sk_buff *userdata)
 {
 	struct sk_buff *tx_skb;
-	int ret;
 
 	IRDA_DEBUG(0, "%s()\n", __func__ );
 
@@ -100,9 +99,7 @@ static int ircomm_lmp_connect_response(struct ircomm_cb *self,
 		tx_skb = userdata;
 	}
 
-	ret = irlmp_connect_response(self->lsap, tx_skb);
-
-	return 0;
+	return irlmp_connect_response(self->lsap, tx_skb);
 }
 
 static int ircomm_lmp_disconnect_request(struct ircomm_cb *self,
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index a39cca8331d..b3cc8b3989a 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -38,6 +38,7 @@
 #include <linux/seq_file.h>
 #include <linux/termios.h>
 #include <linux/tty.h>
+#include <linux/tty_flip.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>		/* for MODULE_ALIAS_CHARDEV_MAJOR */
 
@@ -1132,7 +1133,6 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
 				      struct sk_buff *skb)
 {
 	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
-	struct tty_ldisc *ld;
 
 	IRDA_DEBUG(2, "%s()\n", __func__ );
 
@@ -1161,15 +1161,11 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
 	}
 
 	/*
-	 * Just give it over to the line discipline. There is no need to
-	 * involve the flip buffers, since we are not running in an interrupt
-	 * handler
+	 * Use flip buffer functions since the code may be called from interrupt
+	 * context
 	 */
-
-	ld = tty_ldisc_ref(self->tty);
-	if (ld)
-		ld->ops->receive_buf(self->tty, skb->data, NULL, skb->len);
-	tty_ldisc_deref(ld);
+	tty_insert_flip_string(self->tty, skb->data, skb->len);
+	tty_flip_buffer_push(self->tty);
 
 	/* No need to kfree_skb - see ircomm_ttp_data_indication() */
 
diff --git a/net/irda/irlan/irlan_filter.c b/net/irda/irlan/irlan_filter.c
index 9ff7823abec..7977be7caf0 100644
--- a/net/irda/irlan/irlan_filter.c
+++ b/net/irda/irlan/irlan_filter.c
@@ -143,12 +143,8 @@ void irlan_filter_request(struct irlan_cb *self, struct sk_buff *skb)
  */
 void irlan_check_command_param(struct irlan_cb *self, char *param, char *value)
 {
-	__u8 *bytes;
-
 	IRDA_DEBUG(4, "%s()\n", __func__ );
 
-	bytes = value;
-
 	IRDA_ASSERT(self != NULL, return;);
 	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
 
diff --git a/net/irda/irlan/irlan_provider.c b/net/irda/irlan/irlan_provider.c
index 5cf5e6c872b..b8af74ab8b6 100644
--- a/net/irda/irlan/irlan_provider.c
+++ b/net/irda/irlan/irlan_provider.c
@@ -128,7 +128,6 @@ static void irlan_provider_connect_indication(void *instance, void *sap,
 {
 	struct irlan_cb *self;
 	struct tsap_cb *tsap;
-	__u32 saddr, daddr;
 
 	IRDA_DEBUG(0, "%s()\n", __func__ );
 
@@ -141,8 +140,6 @@ static void irlan_provider_connect_indication(void *instance, void *sap,
 	IRDA_ASSERT(tsap == self->provider.tsap_ctrl,return;);
 	IRDA_ASSERT(self->provider.state == IRLAN_IDLE, return;);
 
-	daddr = irttp_get_daddr(tsap);
-	saddr = irttp_get_saddr(tsap);
 	self->provider.max_sdu_size = max_sdu_size;
 	self->provider.max_header_size = max_header_size;
 
diff --git a/net/irda/irlap.c b/net/irda/irlap.c
index 783c5f367d2..005b424494a 100644
--- a/net/irda/irlap.c
+++ b/net/irda/irlap.c
@@ -165,7 +165,7 @@ struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos,
 
 	irlap_apply_default_connection_parameters(self);
 
-	self->N3 = 3; /* # connections attemts to try before giving up */
+	self->N3 = 3; /* # connections attempts to try before giving up */
 
 	self->state = LAP_NDM;
 
diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c
index d434c888074..ccd214f9d19 100644
--- a/net/irda/irlap_event.c
+++ b/net/irda/irlap_event.c
@@ -708,7 +708,7 @@ static int irlap_state_reply(struct irlap_cb *self, IRLAP_EVENT event,
 
 				self->frame_sent = TRUE;
 			}
-			/* Readjust our timer to accomodate devices
+			/* Readjust our timer to accommodate devices
 			 * doing faster or slower discovery than us...
 			 * Jean II */
 			irlap_start_query_timer(self, info->S, info->s);
@@ -931,7 +931,7 @@ static int irlap_state_setup(struct irlap_cb *self, IRLAP_EVENT event,
 		irlap_send_rr_frame(self, CMD_FRAME);
 
 		/* The timer is set to half the normal timer to quickly
-		 * detect a failure to negociate the new connection
+		 * detect a failure to negotiate the new connection
 		 * parameters. IrLAP 6.11.3.2, note 3.
 		 * Note that currently we don't process this failure
 		 * properly, as we should do a quick disconnect.
@@ -1052,7 +1052,7 @@ static int irlap_state_xmit_p(struct irlap_cb *self, IRLAP_EVENT event,
 				return -EPROTO;
 			}
 
-			/* Substract space used by this skb */
+			/* Subtract space used by this skb */
 			self->bytes_left -= skb->len;
 #else	/* CONFIG_IRDA_DYNAMIC_WINDOW */
 			/* Window has been adjusted for the max packet
@@ -1808,7 +1808,7 @@ static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event,
 
 				return -EPROTO; /* Try again later */
 			}
-			/* Substract space used by this skb */
+			/* Subtract space used by this skb */
 			self->bytes_left -= skb->len;
 #else	/* CONFIG_IRDA_DYNAMIC_WINDOW */
 			/* Window has been adjusted for the max packet
@@ -2227,8 +2227,6 @@ static int irlap_state_nrm_s(struct irlap_cb *self, IRLAP_EVENT event,
 static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event,
 			      struct sk_buff *skb, struct irlap_info *info)
 {
-	int ret = 0;
-
 	IRDA_DEBUG(1, "%s()\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -ENODEV;);
@@ -2289,7 +2287,6 @@ static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event,
 		IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __func__,
 			   event, irlap_event[event]);
 
-		ret = -EINVAL;
 		break;
 	}
 
diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c
index 688222cbf55..8c004161a84 100644
--- a/net/irda/irlap_frame.c
+++ b/net/irda/irlap_frame.c
@@ -848,7 +848,7 @@ void irlap_send_data_primary_poll(struct irlap_cb *self, struct sk_buff *skb)
 	 * though IrLAP is currently sending the *last* frame of the
 	 * tx-window, the driver most likely has only just started
 	 * sending the *first* frame of the same tx-window.
-	 * I.e. we are always at the very begining of or Tx window.
+	 * I.e. we are always at the very beginning of or Tx window.
 	 * Now, we are supposed to set the final timer from the end
 	 * of our tx-window to let the other peer reply. So, we need
 	 * to add extra time to compensate for the fact that we
diff --git a/net/irda/irlmp_event.c b/net/irda/irlmp_event.c
index c1fb5db8104..9505a7d06f1 100644
--- a/net/irda/irlmp_event.c
+++ b/net/irda/irlmp_event.c
@@ -498,7 +498,7 @@ static int irlmp_state_disconnected(struct lsap_cb *self, IRLMP_EVENT event,
 	switch (event) {
 #ifdef CONFIG_IRDA_ULTRA
 	case LM_UDATA_INDICATION:
-		/* This is most bizzare. Those packets are  aka unreliable
+		/* This is most bizarre. Those packets are  aka unreliable
 		 * connected, aka IrLPT or SOCK_DGRAM/IRDAPROTO_UNITDATA.
 		 * Why do we pass them as Ultra ??? Jean II */
 		irlmp_connless_data_indication(self, skb);
diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
index 0d82ff5aeff..979ecb2435a 100644
--- a/net/irda/irnet/irnet.h
+++ b/net/irda/irnet/irnet.h
@@ -73,7 +73,7 @@
  * Infinite thanks to those brave souls for providing the infrastructure
  * upon which IrNET is built.
  *
- * Thanks to all my collegues in HP for helping me. In particular,
+ * Thanks to all my colleagues in HP for helping me. In particular,
  * thanks to Salil Pradhan and Bill Serra for W2k testing...
  * Thanks to Luiz Magalhaes for irnetd and much testing...
  *
diff --git a/net/irda/irproc.c b/net/irda/irproc.c
index 318766e5dbd..b9ac598e211 100644
--- a/net/irda/irproc.c
+++ b/net/irda/irproc.c
@@ -65,15 +65,14 @@ static const struct irda_entry irda_dirs[] = {
 void __init irda_proc_register(void)
 {
 	int i;
-	struct proc_dir_entry *d;
 
 	proc_irda = proc_mkdir("irda", init_net.proc_net);
 	if (proc_irda == NULL)
 		return;
 
 	for (i = 0; i < ARRAY_SIZE(irda_dirs); i++)
-		d = proc_create(irda_dirs[i].name, 0, proc_irda,
-				irda_dirs[i].fops);
+		(void) proc_create(irda_dirs[i].name, 0, proc_irda,
+				   irda_dirs[i].fops);
 }
 
 /*
diff --git a/net/irda/irqueue.c b/net/irda/irqueue.c
index 849aaf0dabb..9715e6e5900 100644
--- a/net/irda/irqueue.c
+++ b/net/irda/irqueue.c
@@ -40,7 +40,7 @@
  *	o the hash function for ints is pathetic (but could be changed)
  *	o locking is sometime suspicious (especially during enumeration)
  *	o most users have only a few elements (== overhead)
- *	o most users never use seach, so don't benefit from hashing
+ *	o most users never use search, so don't benefit from hashing
  * Problem already fixed :
  *	o not 64 bit compliant (most users do hashv = (int) self)
  *	o hashbin_remove() is broken => use hashbin_remove_this()
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index f6054f9ccbe..9d9af460697 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -1193,7 +1193,7 @@ EXPORT_SYMBOL(irttp_connect_request);
 /*
  * Function irttp_connect_confirm (handle, qos, skb)
  *
- *    Sevice user confirms TSAP connection with peer.
+ *    Service user confirms TSAP connection with peer.
  *
  */
 static void irttp_connect_confirm(void *instance, void *sap,
diff --git a/net/irda/qos.c b/net/irda/qos.c
index 2b00974e5ba..1b51bcf4239 100644
--- a/net/irda/qos.c
+++ b/net/irda/qos.c
@@ -39,16 +39,16 @@
 #include <net/irda/irlap_frame.h>
 
 /*
- * Maximum values of the baud rate we negociate with the other end.
+ * Maximum values of the baud rate we negotiate with the other end.
  * Most often, you don't have to change that, because Linux-IrDA will
  * use the maximum offered by the link layer, which usually works fine.
  * In some very rare cases, you may want to limit it to lower speeds...
  */
 int sysctl_max_baud_rate = 16000000;
 /*
- * Maximum value of the lap disconnect timer we negociate with the other end.
+ * Maximum value of the lap disconnect timer we negotiate with the other end.
  * Most often, the value below represent the best compromise, but some user
- * may want to keep the LAP alive longuer or shorter in case of link failure.
+ * may want to keep the LAP alive longer or shorter in case of link failure.
  * Remember that the threshold time (early warning) is fixed to 3s...
  */
 int sysctl_max_noreply_time = 12;
@@ -411,7 +411,7 @@ static void irlap_adjust_qos_settings(struct qos_info *qos)
 	 * Fix tx data size according to user limits - Jean II
 	 */
 	if (qos->data_size.value > sysctl_max_tx_data_size)
-		/* Allow non discrete adjustement to avoid loosing capacity */
+		/* Allow non discrete adjustement to avoid losing capacity */
 		qos->data_size.value = sysctl_max_tx_data_size;
 	/*
 	 * Override Tx window if user request it. - Jean II
diff --git a/net/irda/timer.c b/net/irda/timer.c
index 0335ba0cc59..f418cb2ad49 100644
--- a/net/irda/timer.c
+++ b/net/irda/timer.c
@@ -59,7 +59,7 @@ void irlap_start_query_timer(struct irlap_cb *self, int S, int s)
 	 * slot time, plus add some extra time to properly receive the last
 	 * discovery packet (which is longer due to extra discovery info),
 	 * to avoid messing with for incomming connections requests and
-	 * to accomodate devices that perform discovery slower than us.
+	 * to accommodate devices that perform discovery slower than us.
 	 * Jean II */
 	timeout = ((sysctl_slot_timeout * HZ / 1000) * (S - s)
 		   + XIDEXTRA_TIMEOUT + SMALLBUSY_TIMEOUT);
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 9637e45744f..e2013e434d0 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -190,7 +190,6 @@ static int afiucv_pm_freeze(struct device *dev)
  */
 static int afiucv_pm_restore_thaw(struct device *dev)
 {
-	struct iucv_sock *iucv;
 	struct sock *sk;
 	struct hlist_node *node;
 
@@ -199,7 +198,6 @@ static int afiucv_pm_restore_thaw(struct device *dev)
 #endif
 	read_lock(&iucv_sk_list.lock);
 	sk_for_each(sk, node, &iucv_sk_list.head) {
-		iucv = iucv_sk(sk);
 		switch (sk->sk_state) {
 		case IUCV_CONNECTED:
 			sk->sk_err = EPIPE;
@@ -250,7 +248,7 @@ static struct device *af_iucv_dev;
  *	PRMDATA[0..6]	socket data (max 7 bytes);
  *	PRMDATA[7]	socket data length value (len is 0xff - PRMDATA[7])
  *
- * The socket data length is computed by substracting the socket data length
+ * The socket data length is computed by subtracting the socket data length
  * value from 0xFF.
  * If the socket data len is greater 7, then PRMDATA can be used for special
  * notifications (see iucv_sock_shutdown); and further,
@@ -381,7 +379,6 @@ static void iucv_sock_close(struct sock *sk)
 {
 	unsigned char user_data[16];
 	struct iucv_sock *iucv = iucv_sk(sk);
-	int err;
 	unsigned long timeo;
 
 	iucv_sock_clear_timer(sk);
@@ -394,8 +391,6 @@ static void iucv_sock_close(struct sock *sk)
 
 	case IUCV_CONNECTED:
 	case IUCV_DISCONN:
-		err = 0;
-
 		sk->sk_state = IUCV_CLOSING;
 		sk->sk_state_change(sk);
 
@@ -404,7 +399,7 @@ static void iucv_sock_close(struct sock *sk)
 				timeo = sk->sk_lingertime;
 			else
 				timeo = IUCV_DISCONN_TIMEOUT;
-			err = iucv_sock_wait(sk,
+			iucv_sock_wait(sk,
 					iucv_sock_in_state(sk, IUCV_CLOSED, 0),
 					timeo);
 		}
@@ -417,7 +412,7 @@ static void iucv_sock_close(struct sock *sk)
 			low_nmcpy(user_data, iucv->src_name);
 			high_nmcpy(user_data, iucv->dst_name);
 			ASCEBC(user_data, sizeof(user_data));
-			err = iucv_path_sever(iucv->path, user_data);
+			iucv_path_sever(iucv->path, user_data);
 			iucv_path_free(iucv->path);
 			iucv->path = NULL;
 		}
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 1ee5dab3cfa..a15c0152495 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -128,8 +128,8 @@ struct iucv_irq_list {
 };
 
 static struct iucv_irq_data *iucv_irq_data[NR_CPUS];
-static cpumask_t iucv_buffer_cpumask = CPU_MASK_NONE;
-static cpumask_t iucv_irq_cpumask = CPU_MASK_NONE;
+static cpumask_t iucv_buffer_cpumask = { CPU_BITS_NONE };
+static cpumask_t iucv_irq_cpumask = { CPU_BITS_NONE };
 
 /*
  * Queue of interrupt buffers lock for delivery via the tasklet
@@ -406,7 +406,7 @@ static void iucv_allow_cpu(void *data)
 	parm->set_mask.ipmask = 0xf8;
 	iucv_call_b2f0(IUCV_SETCONTROLMASK, parm);
 	/* Set indication that iucv interrupts are allowed for this cpu. */
-	cpu_set(cpu, iucv_irq_cpumask);
+	cpumask_set_cpu(cpu, &iucv_irq_cpumask);
 }
 
 /**
@@ -426,7 +426,7 @@ static void iucv_block_cpu(void *data)
 	iucv_call_b2f0(IUCV_SETMASK, parm);
 
 	/* Clear indication that iucv interrupts are allowed for this cpu. */
-	cpu_clear(cpu, iucv_irq_cpumask);
+	cpumask_clear_cpu(cpu, &iucv_irq_cpumask);
 }
 
 /**
@@ -451,7 +451,7 @@ static void iucv_block_cpu_almost(void *data)
 	iucv_call_b2f0(IUCV_SETCONTROLMASK, parm);
 
 	/* Clear indication that iucv interrupts are allowed for this cpu. */
-	cpu_clear(cpu, iucv_irq_cpumask);
+	cpumask_clear_cpu(cpu, &iucv_irq_cpumask);
 }
 
 /**
@@ -466,7 +466,7 @@ static void iucv_declare_cpu(void *data)
 	union iucv_param *parm;
 	int rc;
 
-	if (cpu_isset(cpu, iucv_buffer_cpumask))
+	if (cpumask_test_cpu(cpu, &iucv_buffer_cpumask))
 		return;
 
 	/* Declare interrupt buffer. */
@@ -499,9 +499,9 @@ static void iucv_declare_cpu(void *data)
 	}
 
 	/* Set indication that an iucv buffer exists for this cpu. */
-	cpu_set(cpu, iucv_buffer_cpumask);
+	cpumask_set_cpu(cpu, &iucv_buffer_cpumask);
 
-	if (iucv_nonsmp_handler == 0 || cpus_empty(iucv_irq_cpumask))
+	if (iucv_nonsmp_handler == 0 || cpumask_empty(&iucv_irq_cpumask))
 		/* Enable iucv interrupts on this cpu. */
 		iucv_allow_cpu(NULL);
 	else
@@ -520,7 +520,7 @@ static void iucv_retrieve_cpu(void *data)
 	int cpu = smp_processor_id();
 	union iucv_param *parm;
 
-	if (!cpu_isset(cpu, iucv_buffer_cpumask))
+	if (!cpumask_test_cpu(cpu, &iucv_buffer_cpumask))
 		return;
 
 	/* Block iucv interrupts. */
@@ -531,7 +531,7 @@ static void iucv_retrieve_cpu(void *data)
 	iucv_call_b2f0(IUCV_RETRIEVE_BUFFER, parm);
 
 	/* Clear indication that an iucv buffer exists for this cpu. */
-	cpu_clear(cpu, iucv_buffer_cpumask);
+	cpumask_clear_cpu(cpu, &iucv_buffer_cpumask);
 }
 
 /**
@@ -546,8 +546,8 @@ static void iucv_setmask_mp(void)
 	get_online_cpus();
 	for_each_online_cpu(cpu)
 		/* Enable all cpus with a declared buffer. */
-		if (cpu_isset(cpu, iucv_buffer_cpumask) &&
-		    !cpu_isset(cpu, iucv_irq_cpumask))
+		if (cpumask_test_cpu(cpu, &iucv_buffer_cpumask) &&
+		    !cpumask_test_cpu(cpu, &iucv_irq_cpumask))
 			smp_call_function_single(cpu, iucv_allow_cpu,
 						 NULL, 1);
 	put_online_cpus();
@@ -564,9 +564,9 @@ static void iucv_setmask_up(void)
 	int cpu;
 
 	/* Disable all cpu but the first in cpu_irq_cpumask. */
-	cpumask = iucv_irq_cpumask;
-	cpu_clear(first_cpu(iucv_irq_cpumask), cpumask);
-	for_each_cpu_mask_nr(cpu, cpumask)
+	cpumask_copy(&cpumask, &iucv_irq_cpumask);
+	cpumask_clear_cpu(cpumask_first(&iucv_irq_cpumask), &cpumask);
+	for_each_cpu(cpu, &cpumask)
 		smp_call_function_single(cpu, iucv_block_cpu, NULL, 1);
 }
 
@@ -593,7 +593,7 @@ static int iucv_enable(void)
 	rc = -EIO;
 	for_each_online_cpu(cpu)
 		smp_call_function_single(cpu, iucv_declare_cpu, NULL, 1);
-	if (cpus_empty(iucv_buffer_cpumask))
+	if (cpumask_empty(&iucv_buffer_cpumask))
 		/* No cpu could declare an iucv buffer. */
 		goto out;
 	put_online_cpus();
@@ -675,15 +675,16 @@ static int __cpuinit iucv_cpu_notify(struct notifier_block *self,
 	case CPU_DOWN_PREPARE_FROZEN:
 		if (!iucv_path_table)
 			break;
-		cpumask = iucv_buffer_cpumask;
-		cpu_clear(cpu, cpumask);
-		if (cpus_empty(cpumask))
+		cpumask_copy(&cpumask, &iucv_buffer_cpumask);
+		cpumask_clear_cpu(cpu, &cpumask);
+		if (cpumask_empty(&cpumask))
 			/* Can't offline last IUCV enabled cpu. */
 			return notifier_from_errno(-EINVAL);
 		smp_call_function_single(cpu, iucv_retrieve_cpu, NULL, 1);
-		if (cpus_empty(iucv_irq_cpumask))
-			smp_call_function_single(first_cpu(iucv_buffer_cpumask),
-						 iucv_allow_cpu, NULL, 1);
+		if (cpumask_empty(&iucv_irq_cpumask))
+			smp_call_function_single(
+				cpumask_first(&iucv_buffer_cpumask),
+				iucv_allow_cpu, NULL, 1);
 		break;
 	}
 	return NOTIFY_OK;
@@ -735,7 +736,7 @@ static void iucv_cleanup_queue(void)
 	struct iucv_irq_list *p, *n;
 
 	/*
-	 * When a path is severed, the pathid can be reused immediatly
+	 * When a path is severed, the pathid can be reused immediately
 	 * on a iucv connect or a connection pending interrupt. Remove
 	 * all entries from the task queue that refer to a stale pathid
 	 * (iucv_path_table[ix] == NULL). Only then do the iucv connect
@@ -807,7 +808,7 @@ void iucv_unregister(struct iucv_handler *handler, int smp)
 	spin_lock_bh(&iucv_table_lock);
 	/* Remove handler from the iucv_handler_list. */
 	list_del_init(&handler->list);
-	/* Sever all pathids still refering to the handler. */
+	/* Sever all pathids still referring to the handler. */
 	list_for_each_entry_safe(p, n, &handler->paths, list) {
 		iucv_sever_pathid(p->pathid, NULL);
 		iucv_path_table[p->pathid] = NULL;
@@ -828,14 +829,14 @@ EXPORT_SYMBOL(iucv_unregister);
 static int iucv_reboot_event(struct notifier_block *this,
 			     unsigned long event, void *ptr)
 {
-	int i, rc;
+	int i;
 
 	get_online_cpus();
 	on_each_cpu(iucv_block_cpu, NULL, 1);
 	preempt_disable();
 	for (i = 0; i < iucv_max_pathid; i++) {
 		if (iucv_path_table[i])
-			rc = iucv_sever_pathid(i, NULL);
+			iucv_sever_pathid(i, NULL);
 	}
 	preempt_enable();
 	put_online_cpus();
@@ -866,7 +867,7 @@ int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler,
 	int rc;
 
 	local_bh_disable();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -915,7 +916,7 @@ int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler,
 
 	spin_lock_bh(&iucv_table_lock);
 	iucv_cleanup_queue();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -975,7 +976,7 @@ int iucv_path_quiesce(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	local_bh_disable();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1007,7 +1008,7 @@ int iucv_path_resume(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	local_bh_disable();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1036,7 +1037,7 @@ int iucv_path_sever(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	preempt_disable();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1070,7 +1071,7 @@ int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1162,7 +1163,7 @@ int __iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
 	if (msg->flags & IUCV_IPRMDATA)
 		return iucv_message_receive_iprmdata(path, msg, flags,
 						     buffer, size, residual);
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	 if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1235,7 +1236,7 @@ int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg)
 	int rc;
 
 	local_bh_disable();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1274,7 +1275,7 @@ int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1324,7 +1325,7 @@ int __iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
 	union iucv_param *parm;
 	int rc;
 
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1411,7 +1412,7 @@ int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
-	if (cpus_empty(iucv_buffer_cpumask)) {
+	if (cpumask_empty(&iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1888,7 +1889,7 @@ static int iucv_pm_freeze(struct device *dev)
 	printk(KERN_WARNING "iucv_pm_freeze\n");
 #endif
 	if (iucv_pm_state != IUCV_PM_FREEZING) {
-		for_each_cpu_mask_nr(cpu, iucv_irq_cpumask)
+		for_each_cpu(cpu, &iucv_irq_cpumask)
 			smp_call_function_single(cpu, iucv_block_cpu_almost,
 						 NULL, 1);
 		cancel_work_sync(&iucv_work);
@@ -1928,7 +1929,7 @@ static int iucv_pm_thaw(struct device *dev)
 		if (rc)
 			goto out;
 	}
-	if (cpus_empty(iucv_irq_cpumask)) {
+	if (cpumask_empty(&iucv_irq_cpumask)) {
 		if (iucv_nonsmp_handler)
 			/* enable interrupts on one cpu */
 			iucv_allow_cpu(NULL);
@@ -1961,7 +1962,7 @@ static int iucv_pm_restore(struct device *dev)
 		pr_warning("Suspending Linux did not completely close all IUCV "
 			"connections\n");
 	iucv_pm_state = IUCV_PM_RESTORING;
-	if (cpus_empty(iucv_irq_cpumask)) {
+	if (cpumask_empty(&iucv_irq_cpumask)) {
 		rc = iucv_query_maxconn();
 		rc = iucv_enable();
 		if (rc)
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 7db86ffcf07..d62401c2568 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -712,7 +712,7 @@ static unsigned int pfkey_sockaddr_fill(const xfrm_address_t *xaddr, __be16 port
 		sin6->sin6_family = AF_INET6;
 		sin6->sin6_port = port;
 		sin6->sin6_flowinfo = 0;
-		ipv6_addr_copy(&sin6->sin6_addr, (struct in6_addr *)xaddr->a6);
+		ipv6_addr_copy(&sin6->sin6_addr, (const struct in6_addr *)xaddr->a6);
 		sin6->sin6_scope_id = 0;
 		return 128;
 	    }
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index c64ce0a0bb0..ed8a2335442 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -954,7 +954,7 @@ static int l2tp_build_l2tpv3_header(struct l2tp_session *session, void *buf)
 }
 
 static int l2tp_xmit_core(struct l2tp_session *session, struct sk_buff *skb,
-			  size_t data_len)
+			  struct flowi *fl, size_t data_len)
 {
 	struct l2tp_tunnel *tunnel = session->tunnel;
 	unsigned int len = skb->len;
@@ -987,7 +987,7 @@ static int l2tp_xmit_core(struct l2tp_session *session, struct sk_buff *skb,
 
 	/* Queue the packet to IP for output */
 	skb->local_df = 1;
-	error = ip_queue_xmit(skb);
+	error = ip_queue_xmit(skb, fl);
 
 	/* Update stats */
 	if (error >= 0) {
@@ -1028,6 +1028,7 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len
 	int data_len = skb->len;
 	struct l2tp_tunnel *tunnel = session->tunnel;
 	struct sock *sk = tunnel->sock;
+	struct flowi *fl;
 	struct udphdr *uh;
 	struct inet_sock *inet;
 	__wsum csum;
@@ -1060,14 +1061,21 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len
 			      IPSKB_REROUTED);
 	nf_reset(skb);
 
+	bh_lock_sock(sk);
+	if (sock_owned_by_user(sk)) {
+		dev_kfree_skb(skb);
+		goto out_unlock;
+	}
+
 	/* Get routing info from the tunnel socket */
 	skb_dst_drop(skb);
 	skb_dst_set(skb, dst_clone(__sk_dst_get(sk)));
 
+	inet = inet_sk(sk);
+	fl = &inet->cork.fl;
 	switch (tunnel->encap) {
 	case L2TP_ENCAPTYPE_UDP:
 		/* Setup UDP header */
-		inet = inet_sk(sk);
 		__skb_push(skb, sizeof(*uh));
 		skb_reset_transport_header(skb);
 		uh = udp_hdr(skb);
@@ -1105,7 +1113,9 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len
 
 	l2tp_skb_set_owner_w(skb, sk);
 
-	l2tp_xmit_core(session, skb, data_len);
+	l2tp_xmit_core(session, skb, fl, data_len);
+out_unlock:
+	bh_unlock_sock(sk);
 
 abort:
 	return 0;
@@ -1425,16 +1435,15 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32
 
 	/* Add tunnel to our list */
 	INIT_LIST_HEAD(&tunnel->list);
-	spin_lock_bh(&pn->l2tp_tunnel_list_lock);
-	list_add_rcu(&tunnel->list, &pn->l2tp_tunnel_list);
-	spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
-	synchronize_rcu();
 	atomic_inc(&l2tp_tunnel_count);
 
 	/* Bump the reference count. The tunnel context is deleted
-	 * only when this drops to zero.
+	 * only when this drops to zero. Must be done before list insertion
 	 */
 	l2tp_tunnel_inc_refcount(tunnel);
+	spin_lock_bh(&pn->l2tp_tunnel_list_lock);
+	list_add_rcu(&tunnel->list, &pn->l2tp_tunnel_list);
+	spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
 
 	err = 0;
 err:
@@ -1626,7 +1635,6 @@ struct l2tp_session *l2tp_session_create(int priv_size, struct l2tp_tunnel *tunn
 			hlist_add_head_rcu(&session->global_hlist,
 					   l2tp_session_id_hash_2(pn, session_id));
 			spin_unlock_bh(&pn->l2tp_session_hlist_lock);
-			synchronize_rcu();
 		}
 
 		/* Ignore management session in session count value */
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index fce9bd3bd3f..b6466e71f5e 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -296,12 +296,12 @@ out_in_use:
 
 static int l2tp_ip_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {
-	int rc;
-	struct inet_sock *inet = inet_sk(sk);
 	struct sockaddr_l2tpip *lsa = (struct sockaddr_l2tpip *) uaddr;
+	struct inet_sock *inet = inet_sk(sk);
+	struct flowi4 *fl4;
 	struct rtable *rt;
 	__be32 saddr;
-	int oif;
+	int oif, rc;
 
 	rc = -EINVAL;
 	if (addr_len < sizeof(*lsa))
@@ -311,6 +311,8 @@ static int l2tp_ip_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len
 	if (lsa->l2tp_family != AF_INET)
 		goto out;
 
+	lock_sock(sk);
+
 	sk_dst_reset(sk);
 
 	oif = sk->sk_bound_dev_if;
@@ -320,7 +322,8 @@ static int l2tp_ip_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len
 	if (ipv4_is_multicast(lsa->l2tp_addr.s_addr))
 		goto out;
 
-	rt = ip_route_connect(lsa->l2tp_addr.s_addr, saddr,
+	fl4 = &inet->cork.fl.u.ip4;
+	rt = ip_route_connect(fl4, lsa->l2tp_addr.s_addr, saddr,
 			      RT_CONN_FLAGS(sk), oif,
 			      IPPROTO_L2TP,
 			      0, 0, sk, true);
@@ -340,10 +343,10 @@ static int l2tp_ip_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len
 	l2tp_ip_sk(sk)->peer_conn_id = lsa->l2tp_conn_id;
 
 	if (!inet->inet_saddr)
-		inet->inet_saddr = rt->rt_src;
+		inet->inet_saddr = fl4->saddr;
 	if (!inet->inet_rcv_saddr)
-		inet->inet_rcv_saddr = rt->rt_src;
-	inet->inet_daddr = rt->rt_dst;
+		inet->inet_rcv_saddr = fl4->saddr;
+	inet->inet_daddr = fl4->daddr;
 	sk->sk_state = TCP_ESTABLISHED;
 	inet->inet_id = jiffies;
 
@@ -356,6 +359,7 @@ static int l2tp_ip_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len
 
 	rc = 0;
 out:
+	release_sock(sk);
 	return rc;
 }
 
@@ -416,23 +420,28 @@ static int l2tp_ip_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m
 	int rc;
 	struct l2tp_ip_sock *lsa = l2tp_ip_sk(sk);
 	struct inet_sock *inet = inet_sk(sk);
-	struct ip_options *opt = inet->opt;
 	struct rtable *rt = NULL;
+	struct flowi4 *fl4;
 	int connected = 0;
 	__be32 daddr;
 
+	lock_sock(sk);
+
+	rc = -ENOTCONN;
 	if (sock_flag(sk, SOCK_DEAD))
-		return -ENOTCONN;
+		goto out;
 
 	/* Get and verify the address. */
 	if (msg->msg_name) {
 		struct sockaddr_l2tpip *lip = (struct sockaddr_l2tpip *) msg->msg_name;
+		rc = -EINVAL;
 		if (msg->msg_namelen < sizeof(*lip))
-			return -EINVAL;
+			goto out;
 
 		if (lip->l2tp_family != AF_INET) {
+			rc = -EAFNOSUPPORT;
 			if (lip->l2tp_family != AF_UNSPEC)
-				return -EAFNOSUPPORT;
+				goto out;
 		}
 
 		daddr = lip->l2tp_addr.s_addr;
@@ -467,19 +476,27 @@ static int l2tp_ip_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m
 		goto error;
 	}
 
+	fl4 = &inet->cork.fl.u.ip4;
 	if (connected)
 		rt = (struct rtable *) __sk_dst_check(sk, 0);
 
 	if (rt == NULL) {
+		struct ip_options_rcu *inet_opt;
+
+		rcu_read_lock();
+		inet_opt = rcu_dereference(inet->inet_opt);
+
 		/* Use correct destination address if we have options. */
-		if (opt && opt->srr)
-			daddr = opt->faddr;
+		if (inet_opt && inet_opt->opt.srr)
+			daddr = inet_opt->opt.faddr;
+
+		rcu_read_unlock();
 
 		/* If this fails, retransmit mechanism of transport layer will
 		 * keep trying until route appears or the connection times
 		 * itself out.
 		 */
-		rt = ip_route_output_ports(sock_net(sk), sk,
+		rt = ip_route_output_ports(sock_net(sk), fl4, sk,
 					   daddr, inet->inet_saddr,
 					   inet->inet_dport, inet->inet_sport,
 					   sk->sk_protocol, RT_CONN_FLAGS(sk),
@@ -491,7 +508,7 @@ static int l2tp_ip_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m
 	skb_dst_set(skb, dst_clone(&rt->dst));
 
 	/* Queue the packet to IP for output */
-	rc = ip_queue_xmit(skb);
+	rc = ip_queue_xmit(skb, &inet->cork.fl);
 
 error:
 	/* Update stats */
@@ -503,12 +520,15 @@ error:
 		lsa->tx_errors++;
 	}
 
+out:
+	release_sock(sk);
 	return rc;
 
 no_route:
 	IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
 	kfree_skb(skb);
-	return -EHOSTUNREACH;
+	rc = -EHOSTUNREACH;
+	goto out;
 }
 
 static int l2tp_ip_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
@@ -667,7 +687,7 @@ MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
 MODULE_DESCRIPTION("L2TP over IP");
 MODULE_VERSION("1.0");
 
-/* Use the value of SOCK_DGRAM (2) directory, because __stringify does't like
+/* Use the value of SOCK_DGRAM (2) directory, because __stringify doesn't like
  * enums
  */
 MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 2, IPPROTO_L2TP);
diff --git a/net/l2tp/l2tp_netlink.c b/net/l2tp/l2tp_netlink.c
index 4c1e540732d..93a41a09458 100644
--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -795,11 +795,12 @@ int l2tp_nl_register_ops(enum l2tp_pwtype pw_type, const struct l2tp_nl_cmd_ops
 		goto out;
 
 	l2tp_nl_cmd_ops[pw_type] = ops;
+	ret = 0;
 
 out:
 	genl_unlock();
 err:
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(l2tp_nl_register_ops);
 
diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c
index 058f1e9a912..90324211131 100644
--- a/net/llc/llc_input.c
+++ b/net/llc/llc_input.c
@@ -121,8 +121,7 @@ static inline int llc_fixup_skb(struct sk_buff *skb)
 		s32 data_size = ntohs(pdulen) - llc_len;
 
 		if (data_size < 0 ||
-		    ((skb_tail_pointer(skb) -
-		      (u8 *)pdu) - llc_len) < data_size)
+		    !pskb_may_pull(skb, data_size))
 			return 0;
 		if (unlikely(pskb_trim_rcsum(skb, data_size)))
 			return 0;
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index cd5125f77cc..c8be8eff70d 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -144,14 +144,6 @@ void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
 	rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
 }
 
-static void kfree_tid_tx(struct rcu_head *rcu_head)
-{
-	struct tid_ampdu_tx *tid_tx =
-	    container_of(rcu_head, struct tid_ampdu_tx, rcu_head);
-
-	kfree(tid_tx);
-}
-
 int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 				    enum ieee80211_back_parties initiator,
 				    bool tx)
@@ -174,7 +166,7 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 		/* not even started yet! */
 		ieee80211_assign_tid_tx(sta, tid, NULL);
 		spin_unlock_bh(&sta->lock);
-		call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+		kfree_rcu(tid_tx, rcu_head);
 		return 0;
 	}
 
@@ -333,7 +325,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 		spin_unlock_bh(&sta->lock);
 
 		ieee80211_wake_queue_agg(local, tid);
-		call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+		kfree_rcu(tid_tx, rcu_head);
 		return;
 	}
 
@@ -718,7 +710,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
 
 	ieee80211_agg_splice_finish(local, tid);
 
-	call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+	kfree_rcu(tid_tx, rcu_head);
 
  unlock_sta:
 	spin_unlock_bh(&sta->lock);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index ed755889645..2025af52b19 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -97,7 +97,7 @@ struct ieee80211_bss {
 	size_t supp_rates_len;
 
 	/*
-	 * During assocation, we save an ERP value from a probe response so
+	 * During association, we save an ERP value from a probe response so
 	 * that we can feed ERP info to the driver when handling the
 	 * association completes. these fields probably won't be up-to-date
 	 * otherwise, you probably don't want to use them.
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index dee30aea9ab..49d4f869e0b 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1145,10 +1145,6 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 				+ IEEE80211_ENCRYPT_HEADROOM;
 	ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
 
-	ret = dev_alloc_name(ndev, ndev->name);
-	if (ret < 0)
-		goto fail;
-
 	ieee80211_assign_perm_addr(local, ndev, type);
 	memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
 	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 51f6fe86d89..0d2faacc3e8 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -722,7 +722,7 @@ void mesh_path_discard_frame(struct sk_buff *skb,
  *
  * @mpath: mesh path whose queue has to be freed
  *
- * Locking: the function must me called withing a rcu_read_lock region
+ * Locking: the function must me called within a rcu_read_lock region
  */
 void mesh_path_flush_pending(struct mesh_path *mpath)
 {
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 3d09c58938e..333b5118be6 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -259,7 +259,7 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
 		}
 	}
 
-	/* try to sample up to half of the availble rates during each interval */
+	/* try to sample up to half of the available rates during each interval */
 	mi->sample_count *= 4;
 
 	cur_prob = 0;
diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h
index 6510f8ee738..19111c7bf45 100644
--- a/net/mac80211/rc80211_pid.h
+++ b/net/mac80211/rc80211_pid.h
@@ -77,7 +77,7 @@ union rc_pid_event_data {
 };
 
 struct rc_pid_event {
-	/* The time when the event occured */
+	/* The time when the event occurred */
 	unsigned long timestamp;
 
 	/* Event ID number */
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 78c72a41d86..7fa8c6be7bf 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -382,7 +382,7 @@ static void ieee80211_parse_qos(struct ieee80211_rx_data *rx)
  * specs were sane enough this time around to require padding each A-MSDU
  * subframe to a length that is a multiple of four.
  *
- * Padding like Atheros hardware adds which is inbetween the 802.11 header and
+ * Padding like Atheros hardware adds which is between the 802.11 header and
  * the payload is not supported, the driver is required to move the 802.11
  * header to be directly in front of the payload in that case.
  */
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 4a15f960356..b83870bf60f 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -47,9 +47,9 @@
  * Station entries are added by mac80211 when you establish a link with a
  * peer. This means different things for the different type of interfaces
  * we support. For a regular station this mean we add the AP sta when we
- * receive an assocation response from the AP. For IBSS this occurs when
+ * receive an association response from the AP. For IBSS this occurs when
  * get to know about a peer on the same IBSS. For WDS we add the sta for
- * the peer imediately upon device open. When using AP mode we add stations
+ * the peer immediately upon device open. When using AP mode we add stations
  * for each respective station upon request from userspace through nl80211.
  *
  * In order to remove a STA info structure, various sta_info_destroy_*()
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 6eeaaa2bbaf..64e0f7587e6 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -237,6 +237,10 @@ ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data *tx)
 				     &local->dynamic_ps_disable_work);
 	}
 
+	/* Don't restart the timer if we're not disassociated */
+	if (!ifmgd->associated)
+		return TX_CONTINUE;
+
 	mod_timer(&local->dynamic_ps_timer, jiffies +
 		  msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
 
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index a94b312dbfa..d2e7f0e8667 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -65,17 +65,9 @@ static void run_again(struct ieee80211_local *local,
 		mod_timer(&local->work_timer, timeout);
 }
 
-static void work_free_rcu(struct rcu_head *head)
-{
-	struct ieee80211_work *wk =
-		container_of(head, struct ieee80211_work, rcu_head);
-
-	kfree(wk);
-}
-
 void free_work(struct ieee80211_work *wk)
 {
-	call_rcu(&wk->rcu_head, work_free_rcu);
+	kfree_rcu(wk, rcu_head);
 }
 
 static int ieee80211_compatible_rates(const u8 *supp_rates, int supp_rates_len,
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index c3f988aa115..32bff6d86cb 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -652,7 +652,6 @@ comment "Xtables matches"
 config NETFILTER_XT_MATCH_ADDRTYPE
 	tristate '"addrtype" address type match support'
 	depends on NETFILTER_ADVANCED
-	depends on (IPV6 || IPV6=n)
 	---help---
 	  This option allows you to match what routing thinks of an address,
 	  eg. UNICAST, LOCAL, BROADCAST, ...
diff --git a/net/netfilter/ipset/ip_set_bitmap_ip.c b/net/netfilter/ipset/ip_set_bitmap_ip.c
index bca96990218..a113ff06692 100644
--- a/net/netfilter/ipset/ip_set_bitmap_ip.c
+++ b/net/netfilter/ipset/ip_set_bitmap_ip.c
@@ -338,8 +338,7 @@ bitmap_ip_head(struct ip_set *set, struct sk_buff *skb)
 	NLA_PUT_IPADDR4(skb, IPSET_ATTR_IP_TO, htonl(map->last_ip));
 	if (map->netmask != 32)
 		NLA_PUT_U8(skb, IPSET_ATTR_NETMASK, map->netmask);
-	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES,
-		      htonl(atomic_read(&set->ref) - 1));
+	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1));
 	NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE,
 		      htonl(sizeof(*map) + map->memsize));
 	if (with_timeout(map->timeout))
diff --git a/net/netfilter/ipset/ip_set_bitmap_ipmac.c b/net/netfilter/ipset/ip_set_bitmap_ipmac.c
index 5e790172def..a274300b6a5 100644
--- a/net/netfilter/ipset/ip_set_bitmap_ipmac.c
+++ b/net/netfilter/ipset/ip_set_bitmap_ipmac.c
@@ -343,6 +343,10 @@ bitmap_ipmac_kadt(struct ip_set *set, const struct sk_buff *skb,
 	ipset_adtfn adtfn = set->variant->adt[adt];
 	struct ipmac data;
 
+	/* MAC can be src only */
+	if (!(flags & IPSET_DIM_TWO_SRC))
+		return 0;
+
 	data.id = ntohl(ip4addr(skb, flags & IPSET_DIM_ONE_SRC));
 	if (data.id < map->first_ip || data.id > map->last_ip)
 		return -IPSET_ERR_BITMAP_RANGE;
@@ -434,8 +438,7 @@ bitmap_ipmac_head(struct ip_set *set, struct sk_buff *skb)
 		goto nla_put_failure;
 	NLA_PUT_IPADDR4(skb, IPSET_ATTR_IP, htonl(map->first_ip));
 	NLA_PUT_IPADDR4(skb, IPSET_ATTR_IP_TO, htonl(map->last_ip));
-	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES,
-		      htonl(atomic_read(&set->ref) - 1));
+	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1));
 	NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE,
 		      htonl(sizeof(*map)
 			    + (map->last_ip - map->first_ip + 1) * map->dsize));
diff --git a/net/netfilter/ipset/ip_set_bitmap_port.c b/net/netfilter/ipset/ip_set_bitmap_port.c
index 165f09b1a9c..6b38eb8f6ed 100644
--- a/net/netfilter/ipset/ip_set_bitmap_port.c
+++ b/net/netfilter/ipset/ip_set_bitmap_port.c
@@ -320,8 +320,7 @@ bitmap_port_head(struct ip_set *set, struct sk_buff *skb)
 		goto nla_put_failure;
 	NLA_PUT_NET16(skb, IPSET_ATTR_PORT, htons(map->first_port));
 	NLA_PUT_NET16(skb, IPSET_ATTR_PORT_TO, htons(map->last_port));
-	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES,
-		      htonl(atomic_read(&set->ref) - 1));
+	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1));
 	NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE,
 		      htonl(sizeof(*map) + map->memsize));
 	if (with_timeout(map->timeout))
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index d6b48230a54..72d1ac611fd 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -26,6 +26,7 @@
 
 static LIST_HEAD(ip_set_type_list);		/* all registered set types */
 static DEFINE_MUTEX(ip_set_type_mutex);		/* protects ip_set_type_list */
+static DEFINE_RWLOCK(ip_set_ref_lock);		/* protects the set refs */
 
 static struct ip_set **ip_set_list;		/* all individual sets */
 static ip_set_id_t ip_set_max = CONFIG_IP_SET_MAX; /* max number of sets */
@@ -301,13 +302,18 @@ EXPORT_SYMBOL_GPL(ip_set_get_ipaddr6);
 static inline void
 __ip_set_get(ip_set_id_t index)
 {
-	atomic_inc(&ip_set_list[index]->ref);
+	write_lock_bh(&ip_set_ref_lock);
+	ip_set_list[index]->ref++;
+	write_unlock_bh(&ip_set_ref_lock);
 }
 
 static inline void
 __ip_set_put(ip_set_id_t index)
 {
-	atomic_dec(&ip_set_list[index]->ref);
+	write_lock_bh(&ip_set_ref_lock);
+	BUG_ON(ip_set_list[index]->ref == 0);
+	ip_set_list[index]->ref--;
+	write_unlock_bh(&ip_set_ref_lock);
 }
 
 /*
@@ -324,7 +330,7 @@ ip_set_test(ip_set_id_t index, const struct sk_buff *skb,
 	struct ip_set *set = ip_set_list[index];
 	int ret = 0;
 
-	BUG_ON(set == NULL || atomic_read(&set->ref) == 0);
+	BUG_ON(set == NULL);
 	pr_debug("set %s, index %u\n", set->name, index);
 
 	if (dim < set->type->dimension ||
@@ -356,7 +362,7 @@ ip_set_add(ip_set_id_t index, const struct sk_buff *skb,
 	struct ip_set *set = ip_set_list[index];
 	int ret;
 
-	BUG_ON(set == NULL || atomic_read(&set->ref) == 0);
+	BUG_ON(set == NULL);
 	pr_debug("set %s, index %u\n", set->name, index);
 
 	if (dim < set->type->dimension ||
@@ -378,7 +384,7 @@ ip_set_del(ip_set_id_t index, const struct sk_buff *skb,
 	struct ip_set *set = ip_set_list[index];
 	int ret = 0;
 
-	BUG_ON(set == NULL || atomic_read(&set->ref) == 0);
+	BUG_ON(set == NULL);
 	pr_debug("set %s, index %u\n", set->name, index);
 
 	if (dim < set->type->dimension ||
@@ -397,7 +403,6 @@ EXPORT_SYMBOL_GPL(ip_set_del);
  * Find set by name, reference it once. The reference makes sure the
  * thing pointed to, does not go away under our feet.
  *
- * The nfnl mutex must already be activated.
  */
 ip_set_id_t
 ip_set_get_byname(const char *name, struct ip_set **set)
@@ -423,15 +428,12 @@ EXPORT_SYMBOL_GPL(ip_set_get_byname);
  * reference count by 1. The caller shall not assume the index
  * to be valid, after calling this function.
  *
- * The nfnl mutex must already be activated.
  */
 void
 ip_set_put_byindex(ip_set_id_t index)
 {
-	if (ip_set_list[index] != NULL) {
-		BUG_ON(atomic_read(&ip_set_list[index]->ref) == 0);
+	if (ip_set_list[index] != NULL)
 		__ip_set_put(index);
-	}
 }
 EXPORT_SYMBOL_GPL(ip_set_put_byindex);
 
@@ -441,7 +443,6 @@ EXPORT_SYMBOL_GPL(ip_set_put_byindex);
  * can't be destroyed. The set cannot be renamed due to
  * the referencing either.
  *
- * The nfnl mutex must already be activated.
  */
 const char *
 ip_set_name_byindex(ip_set_id_t index)
@@ -449,7 +450,7 @@ ip_set_name_byindex(ip_set_id_t index)
 	const struct ip_set *set = ip_set_list[index];
 
 	BUG_ON(set == NULL);
-	BUG_ON(atomic_read(&set->ref) == 0);
+	BUG_ON(set->ref == 0);
 
 	/* Referenced, so it's safe */
 	return set->name;
@@ -515,10 +516,7 @@ void
 ip_set_nfnl_put(ip_set_id_t index)
 {
 	nfnl_lock();
-	if (ip_set_list[index] != NULL) {
-		BUG_ON(atomic_read(&ip_set_list[index]->ref) == 0);
-		__ip_set_put(index);
-	}
+	ip_set_put_byindex(index);
 	nfnl_unlock();
 }
 EXPORT_SYMBOL_GPL(ip_set_nfnl_put);
@@ -526,7 +524,7 @@ EXPORT_SYMBOL_GPL(ip_set_nfnl_put);
 /*
  * Communication protocol with userspace over netlink.
  *
- * We already locked by nfnl_lock.
+ * The commands are serialized by the nfnl mutex.
  */
 
 static inline bool
@@ -657,7 +655,6 @@ ip_set_create(struct sock *ctnl, struct sk_buff *skb,
 		return -ENOMEM;
 	rwlock_init(&set->lock);
 	strlcpy(set->name, name, IPSET_MAXNAMELEN);
-	atomic_set(&set->ref, 0);
 	set->family = family;
 
 	/*
@@ -690,8 +687,8 @@ ip_set_create(struct sock *ctnl, struct sk_buff *skb,
 
 	/*
 	 * Here, we have a valid, constructed set and we are protected
-	 * by nfnl_lock. Find the first free index in ip_set_list and
-	 * check clashing.
+	 * by the nfnl mutex. Find the first free index in ip_set_list
+	 * and check clashing.
 	 */
 	if ((ret = find_free_id(set->name, &index, &clash)) != 0) {
 		/* If this is the same set and requested, ignore error */
@@ -751,31 +748,51 @@ ip_set_destroy(struct sock *ctnl, struct sk_buff *skb,
 	       const struct nlattr * const attr[])
 {
 	ip_set_id_t i;
+	int ret = 0;
 
 	if (unlikely(protocol_failed(attr)))
 		return -IPSET_ERR_PROTOCOL;
 
-	/* References are protected by the nfnl mutex */
+	/* Commands are serialized and references are
+	 * protected by the ip_set_ref_lock.
+	 * External systems (i.e. xt_set) must call
+	 * ip_set_put|get_nfnl_* functions, that way we
+	 * can safely check references here.
+	 *
+	 * list:set timer can only decrement the reference
+	 * counter, so if it's already zero, we can proceed
+	 * without holding the lock.
+	 */
+	read_lock_bh(&ip_set_ref_lock);
 	if (!attr[IPSET_ATTR_SETNAME]) {
 		for (i = 0; i < ip_set_max; i++) {
-			if (ip_set_list[i] != NULL &&
-			    (atomic_read(&ip_set_list[i]->ref)))
-				return -IPSET_ERR_BUSY;
+			if (ip_set_list[i] != NULL && ip_set_list[i]->ref) {
+				ret = IPSET_ERR_BUSY;
+				goto out;
+			}
 		}
+		read_unlock_bh(&ip_set_ref_lock);
 		for (i = 0; i < ip_set_max; i++) {
 			if (ip_set_list[i] != NULL)
 				ip_set_destroy_set(i);
 		}
 	} else {
 		i = find_set_id(nla_data(attr[IPSET_ATTR_SETNAME]));
-		if (i == IPSET_INVALID_ID)
-			return -ENOENT;
-		else if (atomic_read(&ip_set_list[i]->ref))
-			return -IPSET_ERR_BUSY;
+		if (i == IPSET_INVALID_ID) {
+			ret = -ENOENT;
+			goto out;
+		} else if (ip_set_list[i]->ref) {
+			ret = -IPSET_ERR_BUSY;
+			goto out;
+		}
+		read_unlock_bh(&ip_set_ref_lock);
 
 		ip_set_destroy_set(i);
 	}
 	return 0;
+out:
+	read_unlock_bh(&ip_set_ref_lock);
+	return ret;
 }
 
 /* Flush sets */
@@ -834,6 +851,7 @@ ip_set_rename(struct sock *ctnl, struct sk_buff *skb,
 	struct ip_set *set;
 	const char *name2;
 	ip_set_id_t i;
+	int ret = 0;
 
 	if (unlikely(protocol_failed(attr) ||
 		     attr[IPSET_ATTR_SETNAME] == NULL ||
@@ -843,25 +861,33 @@ ip_set_rename(struct sock *ctnl, struct sk_buff *skb,
 	set = find_set(nla_data(attr[IPSET_ATTR_SETNAME]));
 	if (set == NULL)
 		return -ENOENT;
-	if (atomic_read(&set->ref) != 0)
-		return -IPSET_ERR_REFERENCED;
+
+	read_lock_bh(&ip_set_ref_lock);
+	if (set->ref != 0) {
+		ret = -IPSET_ERR_REFERENCED;
+		goto out;
+	}
 
 	name2 = nla_data(attr[IPSET_ATTR_SETNAME2]);
 	for (i = 0; i < ip_set_max; i++) {
 		if (ip_set_list[i] != NULL &&
-		    STREQ(ip_set_list[i]->name, name2))
-			return -IPSET_ERR_EXIST_SETNAME2;
+		    STREQ(ip_set_list[i]->name, name2)) {
+			ret = -IPSET_ERR_EXIST_SETNAME2;
+			goto out;
+		}
 	}
 	strncpy(set->name, name2, IPSET_MAXNAMELEN);
 
-	return 0;
+out:
+	read_unlock_bh(&ip_set_ref_lock);
+	return ret;
 }
 
 /* Swap two sets so that name/index points to the other.
  * References and set names are also swapped.
  *
- * We are protected by the nfnl mutex and references are
- * manipulated only by holding the mutex. The kernel interfaces
+ * The commands are serialized by the nfnl mutex and references are
+ * protected by the ip_set_ref_lock. The kernel interfaces
  * do not hold the mutex but the pointer settings are atomic
  * so the ip_set_list always contains valid pointers to the sets.
  */
@@ -874,7 +900,6 @@ ip_set_swap(struct sock *ctnl, struct sk_buff *skb,
 	struct ip_set *from, *to;
 	ip_set_id_t from_id, to_id;
 	char from_name[IPSET_MAXNAMELEN];
-	u32 from_ref;
 
 	if (unlikely(protocol_failed(attr) ||
 		     attr[IPSET_ATTR_SETNAME] == NULL ||
@@ -893,23 +918,21 @@ ip_set_swap(struct sock *ctnl, struct sk_buff *skb,
 	to = ip_set_list[to_id];
 
 	/* Features must not change.
-	 * Not an artifical restriction anymore, as we must prevent
+	 * Not an artificial restriction anymore, as we must prevent
 	 * possible loops created by swapping in setlist type of sets. */
 	if (!(from->type->features == to->type->features &&
 	      from->type->family == to->type->family))
 		return -IPSET_ERR_TYPE_MISMATCH;
 
-	/* No magic here: ref munging protected by the nfnl_lock */
 	strncpy(from_name, from->name, IPSET_MAXNAMELEN);
-	from_ref = atomic_read(&from->ref);
-
 	strncpy(from->name, to->name, IPSET_MAXNAMELEN);
-	atomic_set(&from->ref, atomic_read(&to->ref));
 	strncpy(to->name, from_name, IPSET_MAXNAMELEN);
-	atomic_set(&to->ref, from_ref);
 
+	write_lock_bh(&ip_set_ref_lock);
+	swap(from->ref, to->ref);
 	ip_set_list[from_id] = to;
 	ip_set_list[to_id] = from;
+	write_unlock_bh(&ip_set_ref_lock);
 
 	return 0;
 }
@@ -926,7 +949,7 @@ ip_set_dump_done(struct netlink_callback *cb)
 {
 	if (cb->args[2]) {
 		pr_debug("release set %s\n", ip_set_list[cb->args[1]]->name);
-		__ip_set_put((ip_set_id_t) cb->args[1]);
+		ip_set_put_byindex((ip_set_id_t) cb->args[1]);
 	}
 	return 0;
 }
@@ -999,8 +1022,9 @@ ip_set_dump_start(struct sk_buff *skb, struct netlink_callback *cb)
 	if (cb->args[1] >= ip_set_max)
 		goto out;
 
-	pr_debug("args[0]: %ld args[1]: %ld\n", cb->args[0], cb->args[1]);
 	max = cb->args[0] == DUMP_ONE ? cb->args[1] + 1 : ip_set_max;
+dump_last:
+	pr_debug("args[0]: %ld args[1]: %ld\n", cb->args[0], cb->args[1]);
 	for (; cb->args[1] < max; cb->args[1]++) {
 		index = (ip_set_id_t) cb->args[1];
 		set = ip_set_list[index];
@@ -1015,8 +1039,8 @@ ip_set_dump_start(struct sk_buff *skb, struct netlink_callback *cb)
 		 * so that lists (unions of sets) are dumped last.
 		 */
 		if (cb->args[0] != DUMP_ONE &&
-		    !((cb->args[0] == DUMP_ALL) ^
-		      (set->type->features & IPSET_DUMP_LAST)))
+		    ((cb->args[0] == DUMP_ALL) ==
+		     !!(set->type->features & IPSET_DUMP_LAST)))
 			continue;
 		pr_debug("List set: %s\n", set->name);
 		if (!cb->args[2]) {
@@ -1060,6 +1084,12 @@ ip_set_dump_start(struct sk_buff *skb, struct netlink_callback *cb)
 			goto release_refcount;
 		}
 	}
+	/* If we dump all sets, continue with dumping last ones */
+	if (cb->args[0] == DUMP_ALL) {
+		cb->args[0] = DUMP_LAST;
+		cb->args[1] = 0;
+		goto dump_last;
+	}
 	goto out;
 
 nla_put_failure:
@@ -1068,13 +1098,8 @@ release_refcount:
 	/* If there was an error or set is done, release set */
 	if (ret || !cb->args[2]) {
 		pr_debug("release set %s\n", ip_set_list[index]->name);
-		__ip_set_put(index);
+		ip_set_put_byindex(index);
 	}
-
-	/* If we dump all sets, continue with dumping last ones */
-	if (cb->args[0] == DUMP_ALL && cb->args[1] >= max && !cb->args[2])
-		cb->args[0] = DUMP_LAST;
-
 out:
 	if (nlh) {
 		nlmsg_end(skb, nlh);
diff --git a/net/netfilter/ipset/ip_set_getport.c b/net/netfilter/ipset/ip_set_getport.c
index 8d522721268..757143b2240 100644
--- a/net/netfilter/ipset/ip_set_getport.c
+++ b/net/netfilter/ipset/ip_set_getport.c
@@ -11,6 +11,7 @@
 #include <linux/skbuff.h>
 #include <linux/icmp.h>
 #include <linux/icmpv6.h>
+#include <linux/sctp.h>
 #include <linux/netfilter_ipv6/ip6_tables.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
@@ -35,7 +36,20 @@ get_port(const struct sk_buff *skb, int protocol, unsigned int protooff,
 		*port = src ? th->source : th->dest;
 		break;
 	}
-	case IPPROTO_UDP: {
+	case IPPROTO_SCTP: {
+		sctp_sctphdr_t _sh;
+		const sctp_sctphdr_t *sh;
+
+		sh = skb_header_pointer(skb, protooff, sizeof(_sh), &_sh);
+		if (sh == NULL)
+			/* No choice either */
+			return false;
+
+		*port = src ? sh->source : sh->dest;
+		break;
+	}
+	case IPPROTO_UDP:
+	case IPPROTO_UDPLITE: {
 		struct udphdr _udph;
 		const struct udphdr *uh;
 
diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c
index b9214145d35..14281b6b807 100644
--- a/net/netfilter/ipset/ip_set_hash_ipport.c
+++ b/net/netfilter/ipset/ip_set_hash_ipport.c
@@ -491,7 +491,7 @@ static struct ip_set_type hash_ipport_type __read_mostly = {
 	.features	= IPSET_TYPE_IP | IPSET_TYPE_PORT,
 	.dimension	= IPSET_DIM_TWO,
 	.family		= AF_UNSPEC,
-	.revision	= 0,
+	.revision	= 1,
 	.create		= hash_ipport_create,
 	.create_policy	= {
 		[IPSET_ATTR_HASHSIZE]	= { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c
index 4642872df6e..401c8a2531d 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportip.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportip.c
@@ -509,7 +509,7 @@ static struct ip_set_type hash_ipportip_type __read_mostly = {
 	.features	= IPSET_TYPE_IP | IPSET_TYPE_PORT | IPSET_TYPE_IP2,
 	.dimension	= IPSET_DIM_THREE,
 	.family		= AF_UNSPEC,
-	.revision	= 0,
+	.revision	= 1,
 	.create		= hash_ipportip_create,
 	.create_policy	= {
 		[IPSET_ATTR_HASHSIZE]	= { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c
index 2cb84a54b7a..4743e540252 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c
@@ -574,7 +574,7 @@ static struct ip_set_type hash_ipportnet_type __read_mostly = {
 	.features	= IPSET_TYPE_IP | IPSET_TYPE_PORT | IPSET_TYPE_IP2,
 	.dimension	= IPSET_DIM_THREE,
 	.family		= AF_UNSPEC,
-	.revision	= 0,
+	.revision	= 1,
 	.create		= hash_ipportnet_create,
 	.create_policy	= {
 		[IPSET_ATTR_HASHSIZE]	= { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_hash_netport.c b/net/netfilter/ipset/ip_set_hash_netport.c
index 8598676f2a0..d2a40362dd3 100644
--- a/net/netfilter/ipset/ip_set_hash_netport.c
+++ b/net/netfilter/ipset/ip_set_hash_netport.c
@@ -526,7 +526,7 @@ static struct ip_set_type hash_netport_type __read_mostly = {
 	.features	= IPSET_TYPE_IP | IPSET_TYPE_PORT,
 	.dimension	= IPSET_DIM_TWO,
 	.family		= AF_UNSPEC,
-	.revision	= 0,
+	.revision	= 1,
 	.create		= hash_netport_create,
 	.create_policy	= {
 		[IPSET_ATTR_HASHSIZE]	= { .type = NLA_U32 },
diff --git a/net/netfilter/ipset/ip_set_list_set.c b/net/netfilter/ipset/ip_set_list_set.c
index a47c32982f0..e9159e99fc4 100644
--- a/net/netfilter/ipset/ip_set_list_set.c
+++ b/net/netfilter/ipset/ip_set_list_set.c
@@ -43,14 +43,19 @@ struct list_set {
 static inline struct set_elem *
 list_set_elem(const struct list_set *map, u32 id)
 {
-	return (struct set_elem *)((char *)map->members + id * map->dsize);
+	return (struct set_elem *)((void *)map->members + id * map->dsize);
+}
+
+static inline struct set_telem *
+list_set_telem(const struct list_set *map, u32 id)
+{
+	return (struct set_telem *)((void *)map->members + id * map->dsize);
 }
 
 static inline bool
 list_set_timeout(const struct list_set *map, u32 id)
 {
-	const struct set_telem *elem =
-		(const struct set_telem *) list_set_elem(map, id);
+	const struct set_telem *elem = list_set_telem(map, id);
 
 	return ip_set_timeout_test(elem->timeout);
 }
@@ -58,19 +63,11 @@ list_set_timeout(const struct list_set *map, u32 id)
 static inline bool
 list_set_expired(const struct list_set *map, u32 id)
 {
-	const struct set_telem *elem =
-		(const struct set_telem *) list_set_elem(map, id);
+	const struct set_telem *elem = list_set_telem(map, id);
 
 	return ip_set_timeout_expired(elem->timeout);
 }
 
-static inline int
-list_set_exist(const struct set_telem *elem)
-{
-	return elem->id != IPSET_INVALID_ID &&
-	       !ip_set_timeout_expired(elem->timeout);
-}
-
 /* Set list without and with timeout */
 
 static int
@@ -146,11 +143,11 @@ list_elem_tadd(struct list_set *map, u32 i, ip_set_id_t id,
 	struct set_telem *e;
 
 	for (; i < map->size; i++) {
-		e = (struct set_telem *)list_set_elem(map, i);
+		e = list_set_telem(map, i);
 		swap(e->id, id);
+		swap(e->timeout, timeout);
 		if (e->id == IPSET_INVALID_ID)
 			break;
-		swap(e->timeout, timeout);
 	}
 }
 
@@ -164,7 +161,7 @@ list_set_add(struct list_set *map, u32 i, ip_set_id_t id,
 		/* Last element replaced: e.g. add new,before,last */
 		ip_set_put_byindex(e->id);
 	if (with_timeout(map->timeout))
-		list_elem_tadd(map, i, id, timeout);
+		list_elem_tadd(map, i, id, ip_set_timeout_set(timeout));
 	else
 		list_elem_add(map, i, id);
 
@@ -172,11 +169,11 @@ list_set_add(struct list_set *map, u32 i, ip_set_id_t id,
 }
 
 static int
-list_set_del(struct list_set *map, ip_set_id_t id, u32 i)
+list_set_del(struct list_set *map, u32 i)
 {
 	struct set_elem *a = list_set_elem(map, i), *b;
 
-	ip_set_put_byindex(id);
+	ip_set_put_byindex(a->id);
 
 	for (; i < map->size - 1; i++) {
 		b = list_set_elem(map, i + 1);
@@ -308,11 +305,11 @@ list_set_uadt(struct ip_set *set, struct nlattr *tb[],
 				 (before == 0 ||
 				  (before > 0 &&
 				   next_id_eq(map, i, refid))))
-				ret = list_set_del(map, id, i);
+				ret = list_set_del(map, i);
 			else if (before < 0 &&
 				 elem->id == refid &&
 				 next_id_eq(map, i, id))
-				ret = list_set_del(map, id, i + 1);
+				ret = list_set_del(map, i + 1);
 		}
 		break;
 	default:
@@ -369,8 +366,7 @@ list_set_head(struct ip_set *set, struct sk_buff *skb)
 	NLA_PUT_NET32(skb, IPSET_ATTR_SIZE, htonl(map->size));
 	if (with_timeout(map->timeout))
 		NLA_PUT_NET32(skb, IPSET_ATTR_TIMEOUT, htonl(map->timeout));
-	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES,
-		      htonl(atomic_read(&set->ref) - 1));
+	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1));
 	NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE,
 		      htonl(sizeof(*map) + map->size * map->dsize));
 	ipset_nest_end(skb, nested);
@@ -461,16 +457,13 @@ list_set_gc(unsigned long ul_set)
 	struct set_telem *e;
 	u32 i;
 
-	/* We run parallel with other readers (test element)
-	 * but adding/deleting new entries is locked out */
-	read_lock_bh(&set->lock);
-	for (i = map->size - 1; i >= 0; i--) {
-		e = (struct set_telem *) list_set_elem(map, i);
-		if (e->id != IPSET_INVALID_ID &&
-		    list_set_expired(map, i))
-			list_set_del(map, e->id, i);
+	write_lock_bh(&set->lock);
+	for (i = 0; i < map->size; i++) {
+		e = list_set_telem(map, i);
+		if (e->id != IPSET_INVALID_ID && list_set_expired(map, i))
+			list_set_del(map, i);
 	}
-	read_unlock_bh(&set->lock);
+	write_unlock_bh(&set->lock);
 
 	map->gc.expires = jiffies + IPSET_GC_PERIOD(map->timeout) * HZ;
 	add_timer(&map->gc);
diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c
index 2dc6de13ac1..059af3120be 100644
--- a/net/netfilter/ipvs/ip_vs_app.c
+++ b/net/netfilter/ipvs/ip_vs_app.c
@@ -572,11 +572,11 @@ static const struct file_operations ip_vs_app_fops = {
 	.open	 = ip_vs_app_open,
 	.read	 = seq_read,
 	.llseek  = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_net,
 };
 #endif
 
-static int __net_init __ip_vs_app_init(struct net *net)
+int __net_init __ip_vs_app_init(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
@@ -585,26 +585,17 @@ static int __net_init __ip_vs_app_init(struct net *net)
 	return 0;
 }
 
-static void __net_exit __ip_vs_app_cleanup(struct net *net)
+void __net_exit __ip_vs_app_cleanup(struct net *net)
 {
 	proc_net_remove(net, "ip_vs_app");
 }
 
-static struct pernet_operations ip_vs_app_ops = {
-	.init = __ip_vs_app_init,
-	.exit = __ip_vs_app_cleanup,
-};
-
 int __init ip_vs_app_init(void)
 {
-	int rv;
-
-	rv = register_pernet_subsys(&ip_vs_app_ops);
-	return rv;
+	return 0;
 }
 
 
 void ip_vs_app_cleanup(void)
 {
-	unregister_pernet_subsys(&ip_vs_app_ops);
 }
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index f289306cbf1..bf28ac2fc99 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -595,7 +595,7 @@ ip_vs_bind_dest(struct ip_vs_conn *cp, struct ip_vs_dest *dest)
 			atomic_inc(&dest->inactconns);
 	} else {
 		/* It is a persistent connection/template, so increase
-		   the peristent connection counter */
+		   the persistent connection counter */
 		atomic_inc(&dest->persistconns);
 	}
 
@@ -657,7 +657,7 @@ static inline void ip_vs_unbind_dest(struct ip_vs_conn *cp)
 		}
 	} else {
 		/* It is a persistent connection/template, so decrease
-		   the peristent connection counter */
+		   the persistent connection counter */
 		atomic_dec(&dest->persistconns);
 	}
 
@@ -1046,7 +1046,7 @@ static const struct file_operations ip_vs_conn_fops = {
 	.open    = ip_vs_conn_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_net,
 };
 
 static const char *ip_vs_origin_name(unsigned flags)
@@ -1114,7 +1114,7 @@ static const struct file_operations ip_vs_conn_sync_fops = {
 	.open    = ip_vs_conn_sync_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_net,
 };
 
 #endif
@@ -1258,22 +1258,17 @@ int __net_init __ip_vs_conn_init(struct net *net)
 	return 0;
 }
 
-static void __net_exit __ip_vs_conn_cleanup(struct net *net)
+void __net_exit __ip_vs_conn_cleanup(struct net *net)
 {
 	/* flush all the connection entries first */
 	ip_vs_conn_flush(net);
 	proc_net_remove(net, "ip_vs_conn");
 	proc_net_remove(net, "ip_vs_conn_sync");
 }
-static struct pernet_operations ipvs_conn_ops = {
-	.init = __ip_vs_conn_init,
-	.exit = __ip_vs_conn_cleanup,
-};
 
 int __init ip_vs_conn_init(void)
 {
 	int idx;
-	int retc;
 
 	/* Compute size and mask */
 	ip_vs_conn_tab_size = 1 << ip_vs_conn_tab_bits;
@@ -1309,17 +1304,14 @@ int __init ip_vs_conn_init(void)
 		rwlock_init(&__ip_vs_conntbl_lock_array[idx].l);
 	}
 
-	retc = register_pernet_subsys(&ipvs_conn_ops);
-
 	/* calculate the random value for connection hash */
 	get_random_bytes(&ip_vs_conn_rnd, sizeof(ip_vs_conn_rnd));
 
-	return retc;
+	return 0;
 }
 
 void ip_vs_conn_cleanup(void)
 {
-	unregister_pernet_subsys(&ipvs_conn_ops);
 	/* Release the empty cache */
 	kmem_cache_destroy(ip_vs_conn_cachep);
 	vfree(ip_vs_conn_tab);
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 07accf6b240..bfa808f4da1 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1113,6 +1113,9 @@ ip_vs_out(unsigned int hooknum, struct sk_buff *skb, int af)
 		return NF_ACCEPT;
 
 	net = skb_net(skb);
+	if (!net_ipvs(net)->enable)
+		return NF_ACCEPT;
+
 	ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6) {
@@ -1343,6 +1346,7 @@ ip_vs_in_icmp(struct sk_buff *skb, int *related, unsigned int hooknum)
 		return NF_ACCEPT; /* The packet looks wrong, ignore */
 
 	net = skb_net(skb);
+
 	pd = ip_vs_proto_data_get(net, cih->protocol);
 	if (!pd)
 		return NF_ACCEPT;
@@ -1378,15 +1382,7 @@ ip_vs_in_icmp(struct sk_buff *skb, int *related, unsigned int hooknum)
 	ip_vs_in_stats(cp, skb);
 	if (IPPROTO_TCP == cih->protocol || IPPROTO_UDP == cih->protocol)
 		offset += 2 * sizeof(__u16);
-	verdict = ip_vs_icmp_xmit(skb, cp, pp, offset);
-	/* LOCALNODE from FORWARD hook is not supported */
-	if (verdict == NF_ACCEPT && hooknum == NF_INET_FORWARD &&
-	    skb_rtable(skb)->rt_flags & RTCF_LOCAL) {
-		IP_VS_DBG(1, "%s(): "
-			  "local delivery to %pI4 but in FORWARD\n",
-			  __func__, &skb_rtable(skb)->rt_dst);
-		verdict = NF_DROP;
-	}
+	verdict = ip_vs_icmp_xmit(skb, cp, pp, offset, hooknum);
 
   out:
 	__ip_vs_conn_put(cp);
@@ -1408,7 +1404,6 @@ ip_vs_in_icmp_v6(struct sk_buff *skb, int *related, unsigned int hooknum)
 	struct ip_vs_protocol *pp;
 	struct ip_vs_proto_data *pd;
 	unsigned int offset, verdict;
-	struct rt6_info *rt;
 
 	*related = 1;
 
@@ -1470,23 +1465,12 @@ ip_vs_in_icmp_v6(struct sk_buff *skb, int *related, unsigned int hooknum)
 	if (!cp)
 		return NF_ACCEPT;
 
-	verdict = NF_DROP;
-
 	/* do the statistics and put it back */
 	ip_vs_in_stats(cp, skb);
 	if (IPPROTO_TCP == cih->nexthdr || IPPROTO_UDP == cih->nexthdr ||
 	    IPPROTO_SCTP == cih->nexthdr)
 		offset += 2 * sizeof(__u16);
-	verdict = ip_vs_icmp_xmit_v6(skb, cp, pp, offset);
-	/* LOCALNODE from FORWARD hook is not supported */
-	if (verdict == NF_ACCEPT && hooknum == NF_INET_FORWARD &&
-	    (rt = (struct rt6_info *) skb_dst(skb)) &&
-	    rt->rt6i_dev && rt->rt6i_dev->flags & IFF_LOOPBACK) {
-		IP_VS_DBG(1, "%s(): "
-			  "local delivery to %pI6 but in FORWARD\n",
-			  __func__, &rt->rt6i_dst);
-		verdict = NF_DROP;
-	}
+	verdict = ip_vs_icmp_xmit_v6(skb, cp, pp, offset, hooknum);
 
 	__ip_vs_conn_put(cp);
 
@@ -1529,6 +1513,11 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
 			      IP_VS_DBG_ADDR(af, &iph.daddr), hooknum);
 		return NF_ACCEPT;
 	}
+	/* ipvs enabled in this netns ? */
+	net = skb_net(skb);
+	if (!net_ipvs(net)->enable)
+		return NF_ACCEPT;
+
 	ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
 
 	/* Bad... Do not break raw sockets */
@@ -1562,7 +1551,6 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
 			ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
 		}
 
-	net = skb_net(skb);
 	/* Protocol supported? */
 	pd = ip_vs_proto_data_get(net, iph.protocol);
 	if (unlikely(!pd))
@@ -1588,7 +1576,6 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
 	}
 
 	IP_VS_DBG_PKT(11, af, pp, skb, 0, "Incoming packet");
-	net = skb_net(skb);
 	ipvs = net_ipvs(net);
 	/* Check the server status */
 	if (cp->dest && !(cp->dest->flags & IP_VS_DEST_F_AVAILABLE)) {
@@ -1743,10 +1730,16 @@ ip_vs_forward_icmp(unsigned int hooknum, struct sk_buff *skb,
 		   int (*okfn)(struct sk_buff *))
 {
 	int r;
+	struct net *net;
 
 	if (ip_hdr(skb)->protocol != IPPROTO_ICMP)
 		return NF_ACCEPT;
 
+	/* ipvs enabled in this netns ? */
+	net = skb_net(skb);
+	if (!net_ipvs(net)->enable)
+		return NF_ACCEPT;
+
 	return ip_vs_in_icmp(skb, &r, hooknum);
 }
 
@@ -1757,10 +1750,16 @@ ip_vs_forward_icmp_v6(unsigned int hooknum, struct sk_buff *skb,
 		      int (*okfn)(struct sk_buff *))
 {
 	int r;
+	struct net *net;
 
 	if (ipv6_hdr(skb)->nexthdr != IPPROTO_ICMPV6)
 		return NF_ACCEPT;
 
+	/* ipvs enabled in this netns ? */
+	net = skb_net(skb);
+	if (!net_ipvs(net)->enable)
+		return NF_ACCEPT;
+
 	return ip_vs_in_icmp_v6(skb, &r, hooknum);
 }
 #endif
@@ -1884,19 +1883,70 @@ static int __net_init __ip_vs_init(struct net *net)
 		pr_err("%s(): no memory.\n", __func__);
 		return -ENOMEM;
 	}
+	/* Hold the beast until a service is registerd */
+	ipvs->enable = 0;
 	ipvs->net = net;
 	/* Counters used for creating unique names */
 	ipvs->gen = atomic_read(&ipvs_netns_cnt);
 	atomic_inc(&ipvs_netns_cnt);
 	net->ipvs = ipvs;
+
+	if (__ip_vs_estimator_init(net) < 0)
+		goto estimator_fail;
+
+	if (__ip_vs_control_init(net) < 0)
+		goto control_fail;
+
+	if (__ip_vs_protocol_init(net) < 0)
+		goto protocol_fail;
+
+	if (__ip_vs_app_init(net) < 0)
+		goto app_fail;
+
+	if (__ip_vs_conn_init(net) < 0)
+		goto conn_fail;
+
+	if (__ip_vs_sync_init(net) < 0)
+		goto sync_fail;
+
 	printk(KERN_INFO "IPVS: Creating netns size=%zu id=%d\n",
 			 sizeof(struct netns_ipvs), ipvs->gen);
 	return 0;
+/*
+ * Error handling
+ */
+
+sync_fail:
+	__ip_vs_conn_cleanup(net);
+conn_fail:
+	__ip_vs_app_cleanup(net);
+app_fail:
+	__ip_vs_protocol_cleanup(net);
+protocol_fail:
+	__ip_vs_control_cleanup(net);
+control_fail:
+	__ip_vs_estimator_cleanup(net);
+estimator_fail:
+	return -ENOMEM;
 }
 
 static void __net_exit __ip_vs_cleanup(struct net *net)
 {
-	IP_VS_DBG(10, "ipvs netns %d released\n", net_ipvs(net)->gen);
+	__ip_vs_service_cleanup(net);	/* ip_vs_flush() with locks */
+	__ip_vs_conn_cleanup(net);
+	__ip_vs_app_cleanup(net);
+	__ip_vs_protocol_cleanup(net);
+	__ip_vs_control_cleanup(net);
+	__ip_vs_estimator_cleanup(net);
+	IP_VS_DBG(2, "ipvs netns %d released\n", net_ipvs(net)->gen);
+}
+
+static void __net_exit __ip_vs_dev_cleanup(struct net *net)
+{
+	EnterFunction(2);
+	net_ipvs(net)->enable = 0;	/* Disable packet reception */
+	__ip_vs_sync_cleanup(net);
+	LeaveFunction(2);
 }
 
 static struct pernet_operations ipvs_core_ops = {
@@ -1906,6 +1956,10 @@ static struct pernet_operations ipvs_core_ops = {
 	.size = sizeof(struct netns_ipvs),
 };
 
+static struct pernet_operations ipvs_core_dev_ops = {
+	.exit = __ip_vs_dev_cleanup,
+};
+
 /*
  *	Initialize IP Virtual Server
  */
@@ -1913,10 +1967,6 @@ static int __init ip_vs_init(void)
 {
 	int ret;
 
-	ret = register_pernet_subsys(&ipvs_core_ops);	/* Alloc ip_vs struct */
-	if (ret < 0)
-		return ret;
-
 	ip_vs_estimator_init();
 	ret = ip_vs_control_init();
 	if (ret < 0) {
@@ -1944,15 +1994,28 @@ static int __init ip_vs_init(void)
 		goto cleanup_conn;
 	}
 
+	ret = register_pernet_subsys(&ipvs_core_ops);	/* Alloc ip_vs struct */
+	if (ret < 0)
+		goto cleanup_sync;
+
+	ret = register_pernet_device(&ipvs_core_dev_ops);
+	if (ret < 0)
+		goto cleanup_sub;
+
 	ret = nf_register_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	if (ret < 0) {
 		pr_err("can't register hooks.\n");
-		goto cleanup_sync;
+		goto cleanup_dev;
 	}
 
 	pr_info("ipvs loaded.\n");
+
 	return ret;
 
+cleanup_dev:
+	unregister_pernet_device(&ipvs_core_dev_ops);
+cleanup_sub:
+	unregister_pernet_subsys(&ipvs_core_ops);
 cleanup_sync:
 	ip_vs_sync_cleanup();
   cleanup_conn:
@@ -1964,20 +2027,20 @@ cleanup_sync:
 	ip_vs_control_cleanup();
   cleanup_estimator:
 	ip_vs_estimator_cleanup();
-	unregister_pernet_subsys(&ipvs_core_ops);	/* free ip_vs struct */
 	return ret;
 }
 
 static void __exit ip_vs_cleanup(void)
 {
 	nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
+	unregister_pernet_device(&ipvs_core_dev_ops);
+	unregister_pernet_subsys(&ipvs_core_ops);	/* free ip_vs struct */
 	ip_vs_sync_cleanup();
 	ip_vs_conn_cleanup();
 	ip_vs_app_cleanup();
 	ip_vs_protocol_cleanup();
 	ip_vs_control_cleanup();
 	ip_vs_estimator_cleanup();
-	unregister_pernet_subsys(&ipvs_core_ops);	/* free ip_vs struct */
 	pr_info("ipvs unloaded.\n");
 }
 
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 33733c8872e..699c79a5565 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -69,6 +69,11 @@ int ip_vs_get_debug_level(void)
 }
 #endif
 
+
+/*  Protos */
+static void __ip_vs_del_service(struct ip_vs_service *svc);
+
+
 #ifdef CONFIG_IP_VS_IPV6
 /* Taken from rt6_fill_node() in net/ipv6/route.c, is there a better way? */
 static int __ip_vs_addr_is_local_v6(struct net *net,
@@ -1214,6 +1219,8 @@ ip_vs_add_service(struct net *net, struct ip_vs_service_user_kern *u,
 	write_unlock_bh(&__ip_vs_svc_lock);
 
 	*svc_p = svc;
+	/* Now there is a service - full throttle */
+	ipvs->enable = 1;
 	return 0;
 
 
@@ -1472,6 +1479,84 @@ static int ip_vs_flush(struct net *net)
 	return 0;
 }
 
+/*
+ *	Delete service by {netns} in the service table.
+ *	Called by __ip_vs_cleanup()
+ */
+void __ip_vs_service_cleanup(struct net *net)
+{
+	EnterFunction(2);
+	/* Check for "full" addressed entries */
+	mutex_lock(&__ip_vs_mutex);
+	ip_vs_flush(net);
+	mutex_unlock(&__ip_vs_mutex);
+	LeaveFunction(2);
+}
+/*
+ * Release dst hold by dst_cache
+ */
+static inline void
+__ip_vs_dev_reset(struct ip_vs_dest *dest, struct net_device *dev)
+{
+	spin_lock_bh(&dest->dst_lock);
+	if (dest->dst_cache && dest->dst_cache->dev == dev) {
+		IP_VS_DBG_BUF(3, "Reset dev:%s dest %s:%u ,dest->refcnt=%d\n",
+			      dev->name,
+			      IP_VS_DBG_ADDR(dest->af, &dest->addr),
+			      ntohs(dest->port),
+			      atomic_read(&dest->refcnt));
+		ip_vs_dst_reset(dest);
+	}
+	spin_unlock_bh(&dest->dst_lock);
+
+}
+/*
+ * Netdev event receiver
+ * Currently only NETDEV_UNREGISTER is handled, i.e. if we hold a reference to
+ * a device that is "unregister" it must be released.
+ */
+static int ip_vs_dst_event(struct notifier_block *this, unsigned long event,
+			    void *ptr)
+{
+	struct net_device *dev = ptr;
+	struct net *net = dev_net(dev);
+	struct ip_vs_service *svc;
+	struct ip_vs_dest *dest;
+	unsigned int idx;
+
+	if (event != NETDEV_UNREGISTER)
+		return NOTIFY_DONE;
+	IP_VS_DBG(3, "%s() dev=%s\n", __func__, dev->name);
+	EnterFunction(2);
+	mutex_lock(&__ip_vs_mutex);
+	for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
+		list_for_each_entry(svc, &ip_vs_svc_table[idx], s_list) {
+			if (net_eq(svc->net, net)) {
+				list_for_each_entry(dest, &svc->destinations,
+						    n_list) {
+					__ip_vs_dev_reset(dest, dev);
+				}
+			}
+		}
+
+		list_for_each_entry(svc, &ip_vs_svc_fwm_table[idx], f_list) {
+			if (net_eq(svc->net, net)) {
+				list_for_each_entry(dest, &svc->destinations,
+						    n_list) {
+					__ip_vs_dev_reset(dest, dev);
+				}
+			}
+
+		}
+	}
+
+	list_for_each_entry(dest, &net_ipvs(net)->dest_trash, n_list) {
+		__ip_vs_dev_reset(dest, dev);
+	}
+	mutex_unlock(&__ip_vs_mutex);
+	LeaveFunction(2);
+	return NOTIFY_DONE;
+}
 
 /*
  *	Zero counters in a service or all services
@@ -1981,12 +2066,9 @@ static const struct file_operations ip_vs_info_fops = {
 	.open    = ip_vs_info_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
-	.release = seq_release_private,
+	.release = seq_release_net,
 };
 
-#endif
-
-#ifdef CONFIG_PROC_FS
 static int ip_vs_stats_show(struct seq_file *seq, void *v)
 {
 	struct net *net = seq_file_single_net(seq);
@@ -2024,7 +2106,7 @@ static const struct file_operations ip_vs_stats_fops = {
 	.open = ip_vs_stats_seq_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
-	.release = single_release,
+	.release = single_release_net,
 };
 
 static int ip_vs_stats_percpu_show(struct seq_file *seq, void *v)
@@ -2093,7 +2175,7 @@ static const struct file_operations ip_vs_stats_percpu_fops = {
 	.open = ip_vs_stats_percpu_seq_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
-	.release = single_release,
+	.release = single_release_net,
 };
 #endif
 
@@ -3120,7 +3202,7 @@ nla_put_failure:
 static int ip_vs_genl_dump_daemons(struct sk_buff *skb,
 				   struct netlink_callback *cb)
 {
-	struct net *net = skb_net(skb);
+	struct net *net = skb_sknet(skb);
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
 	mutex_lock(&__ip_vs_mutex);
@@ -3588,6 +3670,10 @@ void __net_init __ip_vs_control_cleanup_sysctl(struct net *net) { }
 
 #endif
 
+static struct notifier_block ip_vs_dst_notifier = {
+	.notifier_call = ip_vs_dst_event,
+};
+
 int __net_init __ip_vs_control_init(struct net *net)
 {
 	int idx;
@@ -3626,7 +3712,7 @@ err:
 	return -ENOMEM;
 }
 
-static void __net_exit __ip_vs_control_cleanup(struct net *net)
+void __net_exit __ip_vs_control_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
@@ -3639,11 +3725,6 @@ static void __net_exit __ip_vs_control_cleanup(struct net *net)
 	free_percpu(ipvs->tot_stats.cpustats);
 }
 
-static struct pernet_operations ipvs_control_ops = {
-	.init = __ip_vs_control_init,
-	.exit = __ip_vs_control_cleanup,
-};
-
 int __init ip_vs_control_init(void)
 {
 	int idx;
@@ -3657,33 +3738,32 @@ int __init ip_vs_control_init(void)
 		INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]);
 	}
 
-	ret = register_pernet_subsys(&ipvs_control_ops);
-	if (ret) {
-		pr_err("cannot register namespace.\n");
-		goto err;
-	}
-
 	smp_wmb();	/* Do we really need it now ? */
 
 	ret = nf_register_sockopt(&ip_vs_sockopts);
 	if (ret) {
 		pr_err("cannot register sockopt.\n");
-		goto err_net;
+		goto err_sock;
 	}
 
 	ret = ip_vs_genl_register();
 	if (ret) {
 		pr_err("cannot register Generic Netlink interface.\n");
-		nf_unregister_sockopt(&ip_vs_sockopts);
-		goto err_net;
+		goto err_genl;
 	}
 
+	ret = register_netdevice_notifier(&ip_vs_dst_notifier);
+	if (ret < 0)
+		goto err_notf;
+
 	LeaveFunction(2);
 	return 0;
 
-err_net:
-	unregister_pernet_subsys(&ipvs_control_ops);
-err:
+err_notf:
+	ip_vs_genl_unregister();
+err_genl:
+	nf_unregister_sockopt(&ip_vs_sockopts);
+err_sock:
 	return ret;
 }
 
@@ -3691,7 +3771,6 @@ err:
 void ip_vs_control_cleanup(void)
 {
 	EnterFunction(2);
-	unregister_pernet_subsys(&ipvs_control_ops);
 	ip_vs_genl_unregister();
 	nf_unregister_sockopt(&ip_vs_sockopts);
 	LeaveFunction(2);
diff --git a/net/netfilter/ipvs/ip_vs_est.c b/net/netfilter/ipvs/ip_vs_est.c
index 8c8766ca56a..508cce98777 100644
--- a/net/netfilter/ipvs/ip_vs_est.c
+++ b/net/netfilter/ipvs/ip_vs_est.c
@@ -192,7 +192,7 @@ void ip_vs_read_estimator(struct ip_vs_stats_user *dst,
 	dst->outbps = (e->outbps + 0xF) >> 5;
 }
 
-static int __net_init __ip_vs_estimator_init(struct net *net)
+int __net_init __ip_vs_estimator_init(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
@@ -203,24 +203,16 @@ static int __net_init __ip_vs_estimator_init(struct net *net)
 	return 0;
 }
 
-static void __net_exit __ip_vs_estimator_exit(struct net *net)
+void __net_exit __ip_vs_estimator_cleanup(struct net *net)
 {
 	del_timer_sync(&net_ipvs(net)->est_timer);
 }
-static struct pernet_operations ip_vs_app_ops = {
-	.init = __ip_vs_estimator_init,
-	.exit = __ip_vs_estimator_exit,
-};
 
 int __init ip_vs_estimator_init(void)
 {
-	int rv;
-
-	rv = register_pernet_subsys(&ip_vs_app_ops);
-	return rv;
+	return 0;
 }
 
 void ip_vs_estimator_cleanup(void)
 {
-	unregister_pernet_subsys(&ip_vs_app_ops);
 }
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index f276df9896b..87e40ea77a9 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -131,7 +131,7 @@ static inline void ip_vs_lblc_free(struct ip_vs_lblc_entry *en)
 {
 	list_del(&en->list);
 	/*
-	 * We don't kfree dest because it is refered either by its service
+	 * We don't kfree dest because it is referred either by its service
 	 * or the trash dest list.
 	 */
 	atomic_dec(&en->dest->refcnt);
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index cb1c9913d38..90f618ab6dd 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -152,7 +152,7 @@ static void ip_vs_dest_set_eraseall(struct ip_vs_dest_set *set)
 	write_lock(&set->lock);
 	list_for_each_entry_safe(e, ep, &set->list, list) {
 		/*
-		 * We don't kfree dest because it is refered either
+		 * We don't kfree dest because it is referred either
 		 * by its service or by the trash dest list.
 		 */
 		atomic_dec(&e->dest->refcnt);
diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c
index 17484a4416e..eb86028536f 100644
--- a/net/netfilter/ipvs/ip_vs_proto.c
+++ b/net/netfilter/ipvs/ip_vs_proto.c
@@ -316,7 +316,7 @@ ip_vs_tcpudp_debug_packet(int af, struct ip_vs_protocol *pp,
 /*
  * per network name-space init
  */
-static int __net_init __ip_vs_protocol_init(struct net *net)
+int __net_init __ip_vs_protocol_init(struct net *net)
 {
 #ifdef CONFIG_IP_VS_PROTO_TCP
 	register_ip_vs_proto_netns(net, &ip_vs_protocol_tcp);
@@ -336,7 +336,7 @@ static int __net_init __ip_vs_protocol_init(struct net *net)
 	return 0;
 }
 
-static void __net_exit __ip_vs_protocol_cleanup(struct net *net)
+void __net_exit __ip_vs_protocol_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct ip_vs_proto_data *pd;
@@ -349,11 +349,6 @@ static void __net_exit __ip_vs_protocol_cleanup(struct net *net)
 	}
 }
 
-static struct pernet_operations ipvs_proto_ops = {
-	.init = __ip_vs_protocol_init,
-	.exit = __ip_vs_protocol_cleanup,
-};
-
 int __init ip_vs_protocol_init(void)
 {
 	char protocols[64];
@@ -382,7 +377,6 @@ int __init ip_vs_protocol_init(void)
 	REGISTER_PROTOCOL(&ip_vs_protocol_esp);
 #endif
 	pr_info("Registered protocols (%s)\n", &protocols[2]);
-	return register_pernet_subsys(&ipvs_proto_ops);
 
 	return 0;
 }
@@ -393,7 +387,6 @@ void ip_vs_protocol_cleanup(void)
 	struct ip_vs_protocol *pp;
 	int i;
 
-	unregister_pernet_subsys(&ipvs_proto_ops);
 	/* unregister all the ipvs protocols */
 	for (i = 0; i < IP_VS_PROTO_TAB_SIZE; i++) {
 		while ((pp = ip_vs_proto_table[i]) != NULL)
diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c
index b027ccc49f4..d12ed53ec95 100644
--- a/net/netfilter/ipvs/ip_vs_proto_sctp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c
@@ -566,7 +566,7 @@ static struct ipvs_sctp_nextstate
 	 * SHUTDOWN sent from the client, waitinf for SHUT ACK from the server
 	 */
 	/*
-	 * We recieved the data chuck, keep the state unchanged. I assume
+	 * We received the data chuck, keep the state unchanged. I assume
 	 * that still data chuncks  can be received by both the peers in
 	 * SHUDOWN state
 	 */
@@ -633,7 +633,7 @@ static struct ipvs_sctp_nextstate
 	 * SHUTDOWN sent from the server, waitinf for SHUTDOWN ACK from client
 	 */
 	/*
-	 * We recieved the data chuck, keep the state unchanged. I assume
+	 * We received the data chuck, keep the state unchanged. I assume
 	 * that still data chuncks  can be received by both the peers in
 	 * SHUDOWN state
 	 */
@@ -701,7 +701,7 @@ static struct ipvs_sctp_nextstate
 	 * SHUTDOWN ACK from the client, awaiting for SHUTDOWN COM from server
 	 */
 	/*
-	 * We recieved the data chuck, keep the state unchanged. I assume
+	 * We received the data chuck, keep the state unchanged. I assume
 	 * that still data chuncks  can be received by both the peers in
 	 * SHUDOWN state
 	 */
@@ -771,7 +771,7 @@ static struct ipvs_sctp_nextstate
 	 * SHUTDOWN ACK from the server, awaiting for SHUTDOWN COM from client
 	 */
 	/*
-	 * We recieved the data chuck, keep the state unchanged. I assume
+	 * We received the data chuck, keep the state unchanged. I assume
 	 * that still data chuncks  can be received by both the peers in
 	 * SHUDOWN state
 	 */
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 3e7961e85e9..e292e5bddc7 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -1303,13 +1303,18 @@ static struct socket *make_send_sock(struct net *net)
 	struct socket *sock;
 	int result;
 
-	/* First create a socket */
-	result = __sock_create(net, PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock, 1);
+	/* First create a socket move it to right name space later */
+	result = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock);
 	if (result < 0) {
 		pr_err("Error during creation of socket; terminating\n");
 		return ERR_PTR(result);
 	}
-
+	/*
+	 * Kernel sockets that are a part of a namespace, should not
+	 * hold a reference to a namespace in order to allow to stop it.
+	 * After sk_change_net should be released using sk_release_kernel.
+	 */
+	sk_change_net(sock->sk, net);
 	result = set_mcast_if(sock->sk, ipvs->master_mcast_ifn);
 	if (result < 0) {
 		pr_err("Error setting outbound mcast interface\n");
@@ -1334,8 +1339,8 @@ static struct socket *make_send_sock(struct net *net)
 
 	return sock;
 
-  error:
-	sock_release(sock);
+error:
+	sk_release_kernel(sock->sk);
 	return ERR_PTR(result);
 }
 
@@ -1350,12 +1355,17 @@ static struct socket *make_receive_sock(struct net *net)
 	int result;
 
 	/* First create a socket */
-	result = __sock_create(net, PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock, 1);
+	result = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock);
 	if (result < 0) {
 		pr_err("Error during creation of socket; terminating\n");
 		return ERR_PTR(result);
 	}
-
+	/*
+	 * Kernel sockets that are a part of a namespace, should not
+	 * hold a reference to a namespace in order to allow to stop it.
+	 * After sk_change_net should be released using sk_release_kernel.
+	 */
+	sk_change_net(sock->sk, net);
 	/* it is equivalent to the REUSEADDR option in user-space */
 	sock->sk->sk_reuse = 1;
 
@@ -1377,8 +1387,8 @@ static struct socket *make_receive_sock(struct net *net)
 
 	return sock;
 
-  error:
-	sock_release(sock);
+error:
+	sk_release_kernel(sock->sk);
 	return ERR_PTR(result);
 }
 
@@ -1473,7 +1483,7 @@ static int sync_thread_master(void *data)
 		ip_vs_sync_buff_release(sb);
 
 	/* release the sending multicast socket */
-	sock_release(tinfo->sock);
+	sk_release_kernel(tinfo->sock->sk);
 	kfree(tinfo);
 
 	return 0;
@@ -1513,7 +1523,7 @@ static int sync_thread_backup(void *data)
 	}
 
 	/* release the sending multicast socket */
-	sock_release(tinfo->sock);
+	sk_release_kernel(tinfo->sock->sk);
 	kfree(tinfo->buf);
 	kfree(tinfo);
 
@@ -1601,7 +1611,7 @@ outtinfo:
 outbuf:
 	kfree(buf);
 outsocket:
-	sock_release(sock);
+	sk_release_kernel(sock->sk);
 out:
 	return result;
 }
@@ -1610,6 +1620,7 @@ out:
 int stop_sync_thread(struct net *net, int state)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
+	int retc = -EINVAL;
 
 	IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
 
@@ -1629,7 +1640,7 @@ int stop_sync_thread(struct net *net, int state)
 		spin_lock_bh(&ipvs->sync_lock);
 		ipvs->sync_state &= ~IP_VS_STATE_MASTER;
 		spin_unlock_bh(&ipvs->sync_lock);
-		kthread_stop(ipvs->master_thread);
+		retc = kthread_stop(ipvs->master_thread);
 		ipvs->master_thread = NULL;
 	} else if (state == IP_VS_STATE_BACKUP) {
 		if (!ipvs->backup_thread)
@@ -1639,22 +1650,20 @@ int stop_sync_thread(struct net *net, int state)
 			task_pid_nr(ipvs->backup_thread));
 
 		ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
-		kthread_stop(ipvs->backup_thread);
+		retc = kthread_stop(ipvs->backup_thread);
 		ipvs->backup_thread = NULL;
-	} else {
-		return -EINVAL;
 	}
 
 	/* decrease the module use count */
 	ip_vs_use_count_dec();
 
-	return 0;
+	return retc;
 }
 
 /*
  * Initialize data struct for each netns
  */
-static int __net_init __ip_vs_sync_init(struct net *net)
+int __net_init __ip_vs_sync_init(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
@@ -1668,24 +1677,24 @@ static int __net_init __ip_vs_sync_init(struct net *net)
 	return 0;
 }
 
-static void __ip_vs_sync_cleanup(struct net *net)
+void __ip_vs_sync_cleanup(struct net *net)
 {
-	stop_sync_thread(net, IP_VS_STATE_MASTER);
-	stop_sync_thread(net, IP_VS_STATE_BACKUP);
-}
+	int retc;
 
-static struct pernet_operations ipvs_sync_ops = {
-	.init = __ip_vs_sync_init,
-	.exit = __ip_vs_sync_cleanup,
-};
+	retc = stop_sync_thread(net, IP_VS_STATE_MASTER);
+	if (retc && retc != -ESRCH)
+		pr_err("Failed to stop Master Daemon\n");
 
+	retc = stop_sync_thread(net, IP_VS_STATE_BACKUP);
+	if (retc && retc != -ESRCH)
+		pr_err("Failed to stop Backup Daemon\n");
+}
 
 int __init ip_vs_sync_init(void)
 {
-	return register_pernet_subsys(&ipvs_sync_ops);
+	return 0;
 }
 
 void ip_vs_sync_cleanup(void)
 {
-	unregister_pernet_subsys(&ipvs_sync_ops);
 }
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index 6132b213edd..ee319a4338b 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -87,7 +87,7 @@ __ip_vs_dst_check(struct ip_vs_dest *dest, u32 rtos)
 /* Get route to destination or remote server */
 static struct rtable *
 __ip_vs_get_out_rt(struct sk_buff *skb, struct ip_vs_dest *dest,
-		   __be32 daddr, u32 rtos, int rt_mode)
+		   __be32 daddr, u32 rtos, int rt_mode, __be32 *ret_saddr)
 {
 	struct net *net = dev_net(skb_dst(skb)->dev);
 	struct rtable *rt;			/* Route to the other host */
@@ -98,7 +98,12 @@ __ip_vs_get_out_rt(struct sk_buff *skb, struct ip_vs_dest *dest,
 		spin_lock(&dest->dst_lock);
 		if (!(rt = (struct rtable *)
 		      __ip_vs_dst_check(dest, rtos))) {
-			rt = ip_route_output(net, dest->addr.ip, 0, rtos, 0);
+			struct flowi4 fl4;
+
+			memset(&fl4, 0, sizeof(fl4));
+			fl4.daddr = dest->addr.ip;
+			fl4.flowi4_tos = rtos;
+			rt = ip_route_output_key(net, &fl4);
 			if (IS_ERR(rt)) {
 				spin_unlock(&dest->dst_lock);
 				IP_VS_DBG_RL("ip_route_output error, dest: %pI4\n",
@@ -106,18 +111,30 @@ __ip_vs_get_out_rt(struct sk_buff *skb, struct ip_vs_dest *dest,
 				return NULL;
 			}
 			__ip_vs_dst_set(dest, rtos, dst_clone(&rt->dst), 0);
-			IP_VS_DBG(10, "new dst %pI4, refcnt=%d, rtos=%X\n",
-				  &dest->addr.ip,
+			dest->dst_saddr.ip = fl4.saddr;
+			IP_VS_DBG(10, "new dst %pI4, src %pI4, refcnt=%d, "
+				  "rtos=%X\n",
+				  &dest->addr.ip, &dest->dst_saddr.ip,
 				  atomic_read(&rt->dst.__refcnt), rtos);
 		}
+		daddr = dest->addr.ip;
+		if (ret_saddr)
+			*ret_saddr = dest->dst_saddr.ip;
 		spin_unlock(&dest->dst_lock);
 	} else {
-		rt = ip_route_output(net, daddr, 0, rtos, 0);
+		struct flowi4 fl4;
+
+		memset(&fl4, 0, sizeof(fl4));
+		fl4.daddr = daddr;
+		fl4.flowi4_tos = rtos;
+		rt = ip_route_output_key(net, &fl4);
 		if (IS_ERR(rt)) {
 			IP_VS_DBG_RL("ip_route_output error, dest: %pI4\n",
 				     &daddr);
 			return NULL;
 		}
+		if (ret_saddr)
+			*ret_saddr = fl4.saddr;
 	}
 
 	local = rt->rt_flags & RTCF_LOCAL;
@@ -125,7 +142,7 @@ __ip_vs_get_out_rt(struct sk_buff *skb, struct ip_vs_dest *dest,
 	      rt_mode)) {
 		IP_VS_DBG_RL("Stopping traffic to %s address, dest: %pI4\n",
 			     (rt->rt_flags & RTCF_LOCAL) ?
-			     "local":"non-local", &rt->rt_dst);
+			     "local":"non-local", &daddr);
 		ip_rt_put(rt);
 		return NULL;
 	}
@@ -133,14 +150,14 @@ __ip_vs_get_out_rt(struct sk_buff *skb, struct ip_vs_dest *dest,
 	    !((ort = skb_rtable(skb)) && ort->rt_flags & RTCF_LOCAL)) {
 		IP_VS_DBG_RL("Redirect from non-local address %pI4 to local "
 			     "requires NAT method, dest: %pI4\n",
-			     &ip_hdr(skb)->daddr, &rt->rt_dst);
+			     &ip_hdr(skb)->daddr, &daddr);
 		ip_rt_put(rt);
 		return NULL;
 	}
 	if (unlikely(!local && ipv4_is_loopback(ip_hdr(skb)->saddr))) {
 		IP_VS_DBG_RL("Stopping traffic from loopback address %pI4 "
 			     "to non-local address, dest: %pI4\n",
-			     &ip_hdr(skb)->saddr, &rt->rt_dst);
+			     &ip_hdr(skb)->saddr, &daddr);
 		ip_rt_put(rt);
 		return NULL;
 	}
@@ -229,8 +246,6 @@ out_err:
 
 /*
  * Get route to destination or remote server
- * rt_mode: flags, &1=Allow local dest, &2=Allow non-local dest,
- *	    &4=Allow redirect from remote daddr to local
  */
 static struct rt6_info *
 __ip_vs_get_out_rt_v6(struct sk_buff *skb, struct ip_vs_dest *dest,
@@ -250,7 +265,7 @@ __ip_vs_get_out_rt_v6(struct sk_buff *skb, struct ip_vs_dest *dest,
 			u32 cookie;
 
 			dst = __ip_vs_route_output_v6(net, &dest->addr.in6,
-						      &dest->dst_saddr,
+						      &dest->dst_saddr.in6,
 						      do_xfrm);
 			if (!dst) {
 				spin_unlock(&dest->dst_lock);
@@ -260,11 +275,11 @@ __ip_vs_get_out_rt_v6(struct sk_buff *skb, struct ip_vs_dest *dest,
 			cookie = rt->rt6i_node ? rt->rt6i_node->fn_sernum : 0;
 			__ip_vs_dst_set(dest, 0, dst_clone(&rt->dst), cookie);
 			IP_VS_DBG(10, "new dst %pI6, src %pI6, refcnt=%d\n",
-				  &dest->addr.in6, &dest->dst_saddr,
+				  &dest->addr.in6, &dest->dst_saddr.in6,
 				  atomic_read(&rt->dst.__refcnt));
 		}
 		if (ret_saddr)
-			ipv6_addr_copy(ret_saddr, &dest->dst_saddr);
+			ipv6_addr_copy(ret_saddr, &dest->dst_saddr.in6);
 		spin_unlock(&dest->dst_lock);
 	} else {
 		dst = __ip_vs_route_output_v6(net, daddr, ret_saddr, do_xfrm);
@@ -274,13 +289,14 @@ __ip_vs_get_out_rt_v6(struct sk_buff *skb, struct ip_vs_dest *dest,
 	}
 
 	local = __ip_vs_is_local_route6(rt);
-	if (!((local ? 1 : 2) & rt_mode)) {
+	if (!((local ? IP_VS_RT_MODE_LOCAL : IP_VS_RT_MODE_NON_LOCAL) &
+	      rt_mode)) {
 		IP_VS_DBG_RL("Stopping traffic to %s address, dest: %pI6\n",
 			     local ? "local":"non-local", daddr);
 		dst_release(&rt->dst);
 		return NULL;
 	}
-	if (local && !(rt_mode & 4) &&
+	if (local && !(rt_mode & IP_VS_RT_MODE_RDR) &&
 	    !((ort = (struct rt6_info *) skb_dst(skb)) &&
 	      __ip_vs_is_local_route6(ort))) {
 		IP_VS_DBG_RL("Redirect from non-local address %pI6 to local "
@@ -386,7 +402,7 @@ ip_vs_bypass_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	EnterFunction(10);
 
 	if (!(rt = __ip_vs_get_out_rt(skb, NULL, iph->daddr, RT_TOS(iph->tos),
-				      IP_VS_RT_MODE_NON_LOCAL)))
+				      IP_VS_RT_MODE_NON_LOCAL, NULL)))
 		goto tx_error_icmp;
 
 	/* MTU checking */
@@ -440,7 +456,8 @@ ip_vs_bypass_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 
 	EnterFunction(10);
 
-	if (!(rt = __ip_vs_get_out_rt_v6(skb, NULL, &iph->daddr, NULL, 0, 2)))
+	if (!(rt = __ip_vs_get_out_rt_v6(skb, NULL, &iph->daddr, NULL, 0,
+					 IP_VS_RT_MODE_NON_LOCAL)))
 		goto tx_error_icmp;
 
 	/* MTU checking */
@@ -517,7 +534,7 @@ ip_vs_nat_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 				      RT_TOS(iph->tos),
 				      IP_VS_RT_MODE_LOCAL |
 					IP_VS_RT_MODE_NON_LOCAL |
-					IP_VS_RT_MODE_RDR)))
+					IP_VS_RT_MODE_RDR, NULL)))
 		goto tx_error_icmp;
 	local = rt->rt_flags & RTCF_LOCAL;
 	/*
@@ -539,7 +556,7 @@ ip_vs_nat_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 #endif
 
 	/* From world but DNAT to loopback address? */
-	if (local && ipv4_is_loopback(rt->rt_dst) &&
+	if (local && ipv4_is_loopback(cp->daddr.ip) &&
 	    rt_is_input_route(skb_rtable(skb))) {
 		IP_VS_DBG_RL_PKT(1, AF_INET, pp, skb, 0, "ip_vs_nat_xmit(): "
 				 "stopping DNAT to loopback address");
@@ -632,7 +649,9 @@ ip_vs_nat_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	}
 
 	if (!(rt = __ip_vs_get_out_rt_v6(skb, cp->dest, &cp->daddr.in6, NULL,
-					 0, 1|2|4)))
+					 0, (IP_VS_RT_MODE_LOCAL |
+					     IP_VS_RT_MODE_NON_LOCAL |
+					     IP_VS_RT_MODE_RDR))))
 		goto tx_error_icmp;
 	local = __ip_vs_is_local_route6(rt);
 	/*
@@ -748,6 +767,7 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 		  struct ip_vs_protocol *pp)
 {
 	struct rtable *rt;			/* Route to the other host */
+	__be32 saddr;				/* Source for tunnel */
 	struct net_device *tdev;		/* Device to other host */
 	struct iphdr  *old_iph = ip_hdr(skb);
 	u8     tos = old_iph->tos;
@@ -761,7 +781,8 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 
 	if (!(rt = __ip_vs_get_out_rt(skb, cp->dest, cp->daddr.ip,
 				      RT_TOS(tos), IP_VS_RT_MODE_LOCAL |
-						   IP_VS_RT_MODE_NON_LOCAL)))
+						   IP_VS_RT_MODE_NON_LOCAL,
+						   &saddr)))
 		goto tx_error_icmp;
 	if (rt->rt_flags & RTCF_LOCAL) {
 		ip_rt_put(rt);
@@ -829,8 +850,8 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	iph->frag_off		=	df;
 	iph->protocol		=	IPPROTO_IPIP;
 	iph->tos		=	tos;
-	iph->daddr		=	rt->rt_dst;
-	iph->saddr		=	rt->rt_src;
+	iph->daddr		=	cp->daddr.ip;
+	iph->saddr		=	saddr;
 	iph->ttl		=	old_iph->ttl;
 	ip_select_ident(iph, &rt->dst, NULL);
 
@@ -875,7 +896,8 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	EnterFunction(10);
 
 	if (!(rt = __ip_vs_get_out_rt_v6(skb, cp->dest, &cp->daddr.in6,
-					 &saddr, 1, 1|2)))
+					 &saddr, 1, (IP_VS_RT_MODE_LOCAL |
+						     IP_VS_RT_MODE_NON_LOCAL))))
 		goto tx_error_icmp;
 	if (__ip_vs_is_local_route6(rt)) {
 		dst_release(&rt->dst);
@@ -992,7 +1014,7 @@ ip_vs_dr_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	if (!(rt = __ip_vs_get_out_rt(skb, cp->dest, cp->daddr.ip,
 				      RT_TOS(iph->tos),
 				      IP_VS_RT_MODE_LOCAL |
-					IP_VS_RT_MODE_NON_LOCAL)))
+					IP_VS_RT_MODE_NON_LOCAL, NULL)))
 		goto tx_error_icmp;
 	if (rt->rt_flags & RTCF_LOCAL) {
 		ip_rt_put(rt);
@@ -1050,7 +1072,8 @@ ip_vs_dr_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	EnterFunction(10);
 
 	if (!(rt = __ip_vs_get_out_rt_v6(skb, cp->dest, &cp->daddr.in6, NULL,
-					 0, 1|2)))
+					 0, (IP_VS_RT_MODE_LOCAL |
+					     IP_VS_RT_MODE_NON_LOCAL))))
 		goto tx_error_icmp;
 	if (__ip_vs_is_local_route6(rt)) {
 		dst_release(&rt->dst);
@@ -1109,12 +1132,13 @@ tx_error:
  */
 int
 ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
-		struct ip_vs_protocol *pp, int offset)
+		struct ip_vs_protocol *pp, int offset, unsigned int hooknum)
 {
 	struct rtable	*rt;	/* Route to the other host */
 	int mtu;
 	int rc;
 	int local;
+	int rt_mode;
 
 	EnterFunction(10);
 
@@ -1135,11 +1159,13 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	 * mangle and send the packet here (only for VS/NAT)
 	 */
 
+	/* LOCALNODE from FORWARD hook is not supported */
+	rt_mode = (hooknum != NF_INET_FORWARD) ?
+		  IP_VS_RT_MODE_LOCAL | IP_VS_RT_MODE_NON_LOCAL |
+		  IP_VS_RT_MODE_RDR : IP_VS_RT_MODE_NON_LOCAL;
 	if (!(rt = __ip_vs_get_out_rt(skb, cp->dest, cp->daddr.ip,
 				      RT_TOS(ip_hdr(skb)->tos),
-				      IP_VS_RT_MODE_LOCAL |
-					IP_VS_RT_MODE_NON_LOCAL |
-					IP_VS_RT_MODE_RDR)))
+				      rt_mode, NULL)))
 		goto tx_error_icmp;
 	local = rt->rt_flags & RTCF_LOCAL;
 
@@ -1162,7 +1188,7 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 #endif
 
 	/* From world but DNAT to loopback address? */
-	if (local && ipv4_is_loopback(rt->rt_dst) &&
+	if (local && ipv4_is_loopback(cp->daddr.ip) &&
 	    rt_is_input_route(skb_rtable(skb))) {
 		IP_VS_DBG(1, "%s(): "
 			  "stopping DNAT to loopback %pI4\n",
@@ -1227,12 +1253,13 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 #ifdef CONFIG_IP_VS_IPV6
 int
 ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
-		struct ip_vs_protocol *pp, int offset)
+		struct ip_vs_protocol *pp, int offset, unsigned int hooknum)
 {
 	struct rt6_info	*rt;	/* Route to the other host */
 	int mtu;
 	int rc;
 	int local;
+	int rt_mode;
 
 	EnterFunction(10);
 
@@ -1253,8 +1280,12 @@ ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	 * mangle and send the packet here (only for VS/NAT)
 	 */
 
+	/* LOCALNODE from FORWARD hook is not supported */
+	rt_mode = (hooknum != NF_INET_FORWARD) ?
+		  IP_VS_RT_MODE_LOCAL | IP_VS_RT_MODE_NON_LOCAL |
+		  IP_VS_RT_MODE_RDR : IP_VS_RT_MODE_NON_LOCAL;
 	if (!(rt = __ip_vs_get_out_rt_v6(skb, cp->dest, &cp->daddr.in6, NULL,
-					 0, 1|2|4)))
+					 0, rt_mode)))
 		goto tx_error_icmp;
 
 	local = __ip_vs_is_local_route6(rt);
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 941286ca911..2e1c11f7841 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -453,7 +453,7 @@ __nf_conntrack_confirm(struct sk_buff *skb)
 	   REJECT will give spurious warnings here. */
 	/* NF_CT_ASSERT(atomic_read(&ct->ct_general.use) == 1); */
 
-	/* No external references means noone else could have
+	/* No external references means no one else could have
 	   confirmed us. */
 	NF_CT_ASSERT(!nf_ct_is_confirmed(ct));
 	pr_debug("Confirming conntrack %p\n", ct);
@@ -901,7 +901,7 @@ nf_conntrack_in(struct net *net, u_int8_t pf, unsigned int hooknum,
 	ret = l3proto->get_l4proto(skb, skb_network_offset(skb),
 				   &dataoff, &protonum);
 	if (ret <= 0) {
-		pr_debug("not prepared to track yet or error occured\n");
+		pr_debug("not prepared to track yet or error occurred\n");
 		NF_CT_STAT_INC_ATOMIC(net, error);
 		NF_CT_STAT_INC_ATOMIC(net, invalid);
 		ret = -ret;
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index 80a23ed62bb..05ecdc281a5 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -68,12 +68,6 @@ nf_ct_ext_create(struct nf_ct_ext **ext, enum nf_ct_ext_id id, gfp_t gfp)
 	return (void *)(*ext) + off;
 }
 
-static void __nf_ct_ext_free_rcu(struct rcu_head *head)
-{
-	struct nf_ct_ext *ext = container_of(head, struct nf_ct_ext, rcu);
-	kfree(ext);
-}
-
 void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
 {
 	struct nf_ct_ext *old, *new;
@@ -114,7 +108,7 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
 					(void *)old + old->offset[i]);
 			rcu_read_unlock();
 		}
-		call_rcu(&old->rcu, __nf_ct_ext_free_rcu);
+		kfree_rcu(old, rcu);
 		ct->ext = new;
 	}
 
diff --git a/net/netfilter/nf_conntrack_h323_asn1.c b/net/netfilter/nf_conntrack_h323_asn1.c
index 867882313e4..bcd5ed6b713 100644
--- a/net/netfilter/nf_conntrack_h323_asn1.c
+++ b/net/netfilter/nf_conntrack_h323_asn1.c
@@ -631,7 +631,7 @@ static int decode_seqof(bitstr_t *bs, const struct field_t *f,
 		CHECK_BOUND(bs, 2);
 		count = *bs->cur++;
 		count <<= 8;
-		count = *bs->cur++;
+		count += *bs->cur++;
 		break;
 	case SEMI:
 		BYTE_ALIGN(bs);
diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c
index 533a183e666..18b2ce5c8ce 100644
--- a/net/netfilter/nf_conntrack_h323_main.c
+++ b/net/netfilter/nf_conntrack_h323_main.c
@@ -731,10 +731,10 @@ static int callforward_do_filter(const union nf_inet_addr *src,
 
 		memset(&fl2, 0, sizeof(fl2));
 		fl2.daddr = dst->ip;
-		if (!afinfo->route((struct dst_entry **)&rt1,
-				   flowi4_to_flowi(&fl1))) {
-			if (!afinfo->route((struct dst_entry **)&rt2,
-					   flowi4_to_flowi(&fl2))) {
+		if (!afinfo->route(&init_net, (struct dst_entry **)&rt1,
+				   flowi4_to_flowi(&fl1), false)) {
+			if (!afinfo->route(&init_net, (struct dst_entry **)&rt2,
+					   flowi4_to_flowi(&fl2), false)) {
 				if (rt1->rt_gateway == rt2->rt_gateway &&
 				    rt1->dst.dev  == rt2->dst.dev)
 					ret = 1;
@@ -755,10 +755,10 @@ static int callforward_do_filter(const union nf_inet_addr *src,
 
 		memset(&fl2, 0, sizeof(fl2));
 		ipv6_addr_copy(&fl2.daddr, &dst->in6);
-		if (!afinfo->route((struct dst_entry **)&rt1,
-				   flowi6_to_flowi(&fl1))) {
-			if (!afinfo->route((struct dst_entry **)&rt2,
-					   flowi6_to_flowi(&fl2))) {
+		if (!afinfo->route(&init_net, (struct dst_entry **)&rt1,
+				   flowi6_to_flowi(&fl1), false)) {
+			if (!afinfo->route(&init_net, (struct dst_entry **)&rt2,
+					   flowi6_to_flowi(&fl2), false)) {
 				if (!memcmp(&rt1->rt6i_gateway, &rt2->rt6i_gateway,
 					    sizeof(rt1->rt6i_gateway)) &&
 				    rt1->dst.dev == rt2->dst.dev)
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 30bf8a167fc..482e90c6185 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1334,6 +1334,7 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
 	struct nf_conn *ct;
 	int err = -EINVAL;
 	struct nf_conntrack_helper *helper;
+	struct nf_conn_tstamp *tstamp;
 
 	ct = nf_conntrack_alloc(net, zone, otuple, rtuple, GFP_ATOMIC);
 	if (IS_ERR(ct))
@@ -1451,6 +1452,9 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
 		__set_bit(IPS_EXPECTED_BIT, &ct->status);
 		ct->master = master_ct;
 	}
+	tstamp = nf_conn_tstamp_find(ct);
+	if (tstamp)
+		tstamp->start = ktime_to_ns(ktime_get_real());
 
 	add_timer(&ct->timeout);
 	nf_conntrack_hash_insert(ct);
diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c
index 9ae57c57c50..2e664a69d7d 100644
--- a/net/netfilter/nf_conntrack_proto_dccp.c
+++ b/net/netfilter/nf_conntrack_proto_dccp.c
@@ -98,7 +98,7 @@ static const char * const dccp_state_names[] = {
 #define sIV	CT_DCCP_INVALID
 
 /*
- * DCCP state transistion table
+ * DCCP state transition table
  *
  * The assumption is the same as for TCP tracking:
  *
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index 6f4ee70f460..6772b115465 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -107,9 +107,9 @@ static const u8 sctp_conntracks[2][9][SCTP_CONNTRACK_MAX] = {
 /* abort        */ {sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL},
 /* shutdown     */ {sCL, sCL, sCW, sCE, sSS, sSS, sSR, sSA},
 /* shutdown_ack */ {sSA, sCL, sCW, sCE, sES, sSA, sSA, sSA},
-/* error        */ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA},/* Cant have Stale cookie*/
+/* error        */ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA},/* Can't have Stale cookie*/
 /* cookie_echo  */ {sCL, sCL, sCE, sCE, sES, sSS, sSR, sSA},/* 5.2.4 - Big TODO */
-/* cookie_ack   */ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA},/* Cant come in orig dir */
+/* cookie_ack   */ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sSA},/* Can't come in orig dir */
 /* shutdown_comp*/ {sCL, sCL, sCW, sCE, sES, sSS, sSR, sCL}
 	},
 	{
@@ -121,7 +121,7 @@ static const u8 sctp_conntracks[2][9][SCTP_CONNTRACK_MAX] = {
 /* shutdown     */ {sIV, sCL, sCW, sCE, sSR, sSS, sSR, sSA},
 /* shutdown_ack */ {sIV, sCL, sCW, sCE, sES, sSA, sSA, sSA},
 /* error        */ {sIV, sCL, sCW, sCL, sES, sSS, sSR, sSA},
-/* cookie_echo  */ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sSA},/* Cant come in reply dir */
+/* cookie_echo  */ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sSA},/* Can't come in reply dir */
 /* cookie_ack   */ {sIV, sCL, sCW, sES, sES, sSS, sSR, sSA},
 /* shutdown_comp*/ {sIV, sCL, sCW, sCE, sES, sSS, sSR, sCL}
 	}
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index bcf47eb518e..cb5a2858178 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -707,7 +707,7 @@ static const char *ct_sdp_header_search(const char *dptr, const char *limit,
 }
 
 /* Locate a SDP header (optionally a substring within the header value),
- * optionally stopping at the first occurence of the term header, parse
+ * optionally stopping at the first occurrence of the term header, parse
  * it and return the offset and length of the data we're interested in.
  */
 int ct_sip_get_sdp_header(const struct nf_conn *ct, const char *dptr,
@@ -1419,6 +1419,7 @@ static int sip_help_tcp(struct sk_buff *skb, unsigned int protoff,
 	const char *dptr, *end;
 	s16 diff, tdiff = 0;
 	int ret = NF_ACCEPT;
+	bool term;
 	typeof(nf_nat_sip_seq_adjust_hook) nf_nat_sip_seq_adjust;
 
 	if (ctinfo != IP_CT_ESTABLISHED &&
@@ -1453,14 +1454,21 @@ static int sip_help_tcp(struct sk_buff *skb, unsigned int protoff,
 		if (dptr + matchoff == end)
 			break;
 
-		if (end + strlen("\r\n\r\n") > dptr + datalen)
-			break;
-		if (end[0] != '\r' || end[1] != '\n' ||
-		    end[2] != '\r' || end[3] != '\n')
+		term = false;
+		for (; end + strlen("\r\n\r\n") <= dptr + datalen; end++) {
+			if (end[0] == '\r' && end[1] == '\n' &&
+			    end[2] == '\r' && end[3] == '\n') {
+				term = true;
+				break;
+			}
+		}
+		if (!term)
 			break;
 		end += strlen("\r\n\r\n") + clen;
 
 		msglen = origlen = end - dptr;
+		if (msglen > datalen)
+			return NF_DROP;
 
 		ret = process_sip_msg(skb, ct, dataoff, &dptr, &msglen);
 		if (ret != NF_ACCEPT)
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 0ae14282588..05e9feb101c 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -245,7 +245,7 @@ static int ct_seq_show(struct seq_file *s, void *v)
 	ret = 0;
 release:
 	nf_ct_put(ct);
-	return 0;
+	return ret;
 }
 
 static const struct seq_operations ct_seq_ops = {
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index 5ab22e2bbd7..5b466cd1272 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -134,7 +134,7 @@ static int __nf_queue(struct sk_buff *skb,
 	const struct nf_afinfo *afinfo;
 	const struct nf_queue_handler *qh;
 
-	/* QUEUE == DROP if noone is waiting, to be safe. */
+	/* QUEUE == DROP if no one is waiting, to be safe. */
 	rcu_read_lock();
 
 	qh = rcu_dereference(queue_handler[pf]);
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 985e9b76c91..e0ee010935e 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -381,7 +381,6 @@ __build_packet_message(struct nfulnl_instance *inst,
 	struct nfulnl_msg_packet_hdr pmsg;
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
-	__be32 tmp_uint;
 	sk_buff_data_t old_tail = inst->skb->tail;
 
 	nlh = NLMSG_PUT(inst->skb, 0, 0,
@@ -428,7 +427,6 @@ __build_packet_message(struct nfulnl_instance *inst,
 	}
 
 	if (outdev) {
-		tmp_uint = htonl(outdev->ifindex);
 #ifndef CONFIG_BRIDGE_NETFILTER
 		NLA_PUT_BE32(inst->skb, NFULA_IFINDEX_OUTDEV,
 			     htonl(outdev->ifindex));
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index a9adf4c6b29..b0869fe3633 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -455,6 +455,7 @@ void xt_compat_flush_offsets(u_int8_t af)
 		vfree(xt[af].compat_tab);
 		xt[af].compat_tab = NULL;
 		xt[af].number = 0;
+		xt[af].cur = 0;
 	}
 }
 EXPORT_SYMBOL_GPL(xt_compat_flush_offsets);
@@ -473,8 +474,7 @@ int xt_compat_calc_jump(u_int8_t af, unsigned int offset)
 		else
 			return mid ? tmp[mid - 1].delta : 0;
 	}
-	WARN_ON_ONCE(1);
-	return 0;
+	return left ? tmp[left - 1].delta : 0;
 }
 EXPORT_SYMBOL_GPL(xt_compat_calc_jump);
 
@@ -762,8 +762,8 @@ void xt_compat_unlock(u_int8_t af)
 EXPORT_SYMBOL_GPL(xt_compat_unlock);
 #endif
 
-DEFINE_PER_CPU(struct xt_info_lock, xt_info_locks);
-EXPORT_PER_CPU_SYMBOL_GPL(xt_info_locks);
+DEFINE_PER_CPU(seqcount_t, xt_recseq);
+EXPORT_PER_CPU_SYMBOL_GPL(xt_recseq);
 
 static int xt_jumpstack_alloc(struct xt_table_info *i)
 {
@@ -1362,10 +1362,7 @@ static int __init xt_init(void)
 	int rv;
 
 	for_each_possible_cpu(i) {
-		struct xt_info_lock *lock = &per_cpu(xt_info_locks, i);
-
-		seqlock_init(&lock->lock);
-		lock->readers = 0;
+		seqcount_init(&per_cpu(xt_recseq, i));
 	}
 
 	xt = kmalloc(sizeof(struct xt_af) * NFPROTO_NUMPROTO, GFP_KERNEL);
diff --git a/net/netfilter/xt_DSCP.c b/net/netfilter/xt_DSCP.c
index 0a229191e55..ae8271652ef 100644
--- a/net/netfilter/xt_DSCP.c
+++ b/net/netfilter/xt_DSCP.c
@@ -99,7 +99,7 @@ tos_tg6(struct sk_buff *skb, const struct xt_action_param *par)
 	u_int8_t orig, nv;
 
 	orig = ipv6_get_dsfield(iph);
-	nv   = (orig & info->tos_mask) ^ info->tos_value;
+	nv   = (orig & ~info->tos_mask) ^ info->tos_value;
 
 	if (orig != nv) {
 		if (!skb_make_writable(skb, sizeof(struct iphdr)))
diff --git a/net/netfilter/xt_TCPMSS.c b/net/netfilter/xt_TCPMSS.c
index 6e6b46cb1db..9e63b43faee 100644
--- a/net/netfilter/xt_TCPMSS.c
+++ b/net/netfilter/xt_TCPMSS.c
@@ -166,7 +166,7 @@ static u_int32_t tcpmss_reverse_mtu(const struct sk_buff *skb,
 	rcu_read_lock();
 	ai = nf_get_afinfo(family);
 	if (ai != NULL)
-		ai->route((struct dst_entry **)&rt, &fl);
+		ai->route(&init_net, (struct dst_entry **)&rt, &fl, false);
 	rcu_read_unlock();
 
 	if (rt != NULL) {
diff --git a/net/netfilter/xt_addrtype.c b/net/netfilter/xt_addrtype.c
index 2220b85e951..b77d383cec7 100644
--- a/net/netfilter/xt_addrtype.c
+++ b/net/netfilter/xt_addrtype.c
@@ -32,11 +32,32 @@ MODULE_ALIAS("ipt_addrtype");
 MODULE_ALIAS("ip6t_addrtype");
 
 #if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
-static u32 xt_addrtype_rt6_to_type(const struct rt6_info *rt)
+static u32 match_lookup_rt6(struct net *net, const struct net_device *dev,
+			    const struct in6_addr *addr)
 {
+	const struct nf_afinfo *afinfo;
+	struct flowi6 flow;
+	struct rt6_info *rt;
 	u32 ret;
+	int route_err;
 
-	if (!rt)
+	memset(&flow, 0, sizeof(flow));
+	ipv6_addr_copy(&flow.daddr, addr);
+	if (dev)
+		flow.flowi6_oif = dev->ifindex;
+
+	rcu_read_lock();
+
+	afinfo = nf_get_afinfo(NFPROTO_IPV6);
+	if (afinfo != NULL)
+		route_err = afinfo->route(net, (struct dst_entry **)&rt,
+					flowi6_to_flowi(&flow), !!dev);
+	else
+		route_err = 1;
+
+	rcu_read_unlock();
+
+	if (route_err)
 		return XT_ADDRTYPE_UNREACHABLE;
 
 	if (rt->rt6i_flags & RTF_REJECT)
@@ -48,6 +69,9 @@ static u32 xt_addrtype_rt6_to_type(const struct rt6_info *rt)
 		ret |= XT_ADDRTYPE_LOCAL;
 	if (rt->rt6i_flags & RTF_ANYCAST)
 		ret |= XT_ADDRTYPE_ANYCAST;
+
+
+	dst_release(&rt->dst);
 	return ret;
 }
 
@@ -65,18 +89,8 @@ static bool match_type6(struct net *net, const struct net_device *dev,
 		return false;
 
 	if ((XT_ADDRTYPE_LOCAL | XT_ADDRTYPE_ANYCAST |
-	     XT_ADDRTYPE_UNREACHABLE) & mask) {
-		struct rt6_info *rt;
-		u32 type;
-		int ifindex = dev ? dev->ifindex : 0;
-
-		rt = rt6_lookup(net, addr, NULL, ifindex, !!dev);
-
-		type = xt_addrtype_rt6_to_type(rt);
-
-		dst_release(&rt->dst);
-		return !!(mask & type);
-	}
+	     XT_ADDRTYPE_UNREACHABLE) & mask)
+		return !!(mask & match_lookup_rt6(net, dev, addr));
 	return true;
 }
 
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 2c0086a4751..61805d7b38a 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -195,7 +195,7 @@ conntrack_mt(const struct sk_buff *skb, struct xt_action_param *par,
 		return info->match_flags & XT_CONNTRACK_STATE;
 	if ((info->match_flags & XT_CONNTRACK_DIRECTION) &&
 	    (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) ^
-	    !!(info->invert_flags & XT_CONNTRACK_DIRECTION))
+	    !(info->invert_flags & XT_CONNTRACK_DIRECTION))
 		return false;
 
 	if (info->match_flags & XT_CONNTRACK_ORIGSRC)
@@ -272,11 +272,6 @@ static int conntrack_mt_check(const struct xt_mtchk_param *par)
 {
 	int ret;
 
-	if (strcmp(par->table, "raw") == 0) {
-		pr_info("state is undetermined at the time of raw table\n");
-		return -EINVAL;
-	}
-
 	ret = nf_ct_l3proto_try_module_get(par->family);
 	if (ret < 0)
 		pr_info("cannot load conntrack support for proto=%u\n",
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
index 4327e101c04..846f895cb65 100644
--- a/net/netfilter/xt_osf.c
+++ b/net/netfilter/xt_osf.c
@@ -62,13 +62,6 @@ static const struct nla_policy xt_osf_policy[OSF_ATTR_MAX + 1] = {
 	[OSF_ATTR_FINGER]	= { .len = sizeof(struct xt_osf_user_finger) },
 };
 
-static void xt_osf_finger_free_rcu(struct rcu_head *rcu_head)
-{
-	struct xt_osf_finger *f = container_of(rcu_head, struct xt_osf_finger, rcu_head);
-
-	kfree(f);
-}
-
 static int xt_osf_add_callback(struct sock *ctnl, struct sk_buff *skb,
 			       const struct nlmsghdr *nlh,
 			       const struct nlattr * const osf_attrs[])
@@ -133,7 +126,7 @@ static int xt_osf_remove_callback(struct sock *ctnl, struct sk_buff *skb,
 		 * We are protected by nfnl mutex.
 		 */
 		list_del_rcu(&sf->finger_entry);
-		call_rcu(&sf->rcu_head, xt_osf_finger_free_rcu);
+		kfree_rcu(sf, rcu_head);
 
 		err = 0;
 		break;
@@ -414,7 +407,7 @@ static void __exit xt_osf_fini(void)
 
 		list_for_each_entry_rcu(f, &xt_osf_fingers[i], finger_entry) {
 			list_del_rcu(&f->finger_entry);
-			call_rcu(&f->rcu_head, xt_osf_finger_free_rcu);
+			kfree_rcu(f, rcu_head);
 		}
 	}
 	rcu_read_unlock();
diff --git a/net/netfilter/xt_set.c b/net/netfilter/xt_set.c
index 061d48cec13..b3babaed771 100644
--- a/net/netfilter/xt_set.c
+++ b/net/netfilter/xt_set.c
@@ -81,6 +81,7 @@ set_match_v0_checkentry(const struct xt_mtchk_param *par)
 	if (info->match_set.u.flags[IPSET_DIM_MAX-1] != 0) {
 		pr_warning("Protocol error: set match dimension "
 			   "is over the limit!\n");
+		ip_set_nfnl_put(info->match_set.index);
 		return -ERANGE;
 	}
 
@@ -135,6 +136,8 @@ set_target_v0_checkentry(const struct xt_tgchk_param *par)
 		if (index == IPSET_INVALID_ID) {
 			pr_warning("Cannot find del_set index %u as target\n",
 				   info->del_set.index);
+			if (info->add_set.index != IPSET_INVALID_ID)
+				ip_set_nfnl_put(info->add_set.index);
 			return -ENOENT;
 		}
 	}
@@ -142,6 +145,10 @@ set_target_v0_checkentry(const struct xt_tgchk_param *par)
 	    info->del_set.u.flags[IPSET_DIM_MAX-1] != 0) {
 		pr_warning("Protocol error: SET target dimension "
 			   "is over the limit!\n");
+		if (info->add_set.index != IPSET_INVALID_ID)
+			ip_set_nfnl_put(info->add_set.index);
+		if (info->del_set.index != IPSET_INVALID_ID)
+			ip_set_nfnl_put(info->del_set.index);
 		return -ERANGE;
 	}
 
@@ -192,6 +199,7 @@ set_match_checkentry(const struct xt_mtchk_param *par)
 	if (info->match_set.dim > IPSET_DIM_MAX) {
 		pr_warning("Protocol error: set match dimension "
 			   "is over the limit!\n");
+		ip_set_nfnl_put(info->match_set.index);
 		return -ERANGE;
 	}
 
@@ -219,7 +227,7 @@ set_target(struct sk_buff *skb, const struct xt_action_param *par)
 	if (info->del_set.index != IPSET_INVALID_ID)
 		ip_set_del(info->del_set.index,
 			   skb, par->family,
-			   info->add_set.dim,
+			   info->del_set.dim,
 			   info->del_set.flags);
 
 	return XT_CONTINUE;
@@ -245,13 +253,19 @@ set_target_checkentry(const struct xt_tgchk_param *par)
 		if (index == IPSET_INVALID_ID) {
 			pr_warning("Cannot find del_set index %u as target\n",
 				   info->del_set.index);
+			if (info->add_set.index != IPSET_INVALID_ID)
+				ip_set_nfnl_put(info->add_set.index);
 			return -ENOENT;
 		}
 	}
 	if (info->add_set.dim > IPSET_DIM_MAX ||
-	    info->del_set.flags > IPSET_DIM_MAX) {
+	    info->del_set.dim > IPSET_DIM_MAX) {
 		pr_warning("Protocol error: SET target dimension "
 			   "is over the limit!\n");
+		if (info->add_set.index != IPSET_INVALID_ID)
+			ip_set_nfnl_put(info->add_set.index);
+		if (info->del_set.index != IPSET_INVALID_ID)
+			ip_set_nfnl_put(info->del_set.index);
 		return -ERANGE;
 	}
 
diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index 5f14c8462e3..bae5756b162 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -422,7 +422,6 @@ static int netlbl_cipsov4_add(struct sk_buff *skb, struct genl_info *info)
 
 {
 	int ret_val = -EINVAL;
-	const char *type_str = "(unknown)";
 	struct netlbl_audit audit_info;
 
 	if (!info->attrs[NLBL_CIPSOV4_A_DOI] ||
@@ -432,15 +431,12 @@ static int netlbl_cipsov4_add(struct sk_buff *skb, struct genl_info *info)
 	netlbl_netlink_auditinfo(skb, &audit_info);
 	switch (nla_get_u32(info->attrs[NLBL_CIPSOV4_A_MTYPE])) {
 	case CIPSO_V4_MAP_TRANS:
-		type_str = "trans";
 		ret_val = netlbl_cipsov4_add_std(info, &audit_info);
 		break;
 	case CIPSO_V4_MAP_PASS:
-		type_str = "pass";
 		ret_val = netlbl_cipsov4_add_pass(info, &audit_info);
 		break;
 	case CIPSO_V4_MAP_LOCAL:
-		type_str = "local";
 		ret_val = netlbl_cipsov4_add_local(info, &audit_info);
 		break;
 	}
diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c
index d37b7f80fa3..de0d8e4cbfb 100644
--- a/net/netlabel/netlabel_domainhash.c
+++ b/net/netlabel/netlabel_domainhash.c
@@ -109,7 +109,7 @@ static void netlbl_domhsh_free_entry(struct rcu_head *entry)
  *
  * Description:
  * This is the hashing function for the domain hash table, it returns the
- * correct bucket number for the domain.  The caller is responsibile for
+ * correct bucket number for the domain.  The caller is responsible for
  * ensuring that the hash table is protected with either a RCU read lock or the
  * hash table lock.
  *
@@ -134,7 +134,7 @@ static u32 netlbl_domhsh_hash(const char *key)
  *
  * Description:
  * Searches the domain hash table and returns a pointer to the hash table
- * entry if found, otherwise NULL is returned.  The caller is responsibile for
+ * entry if found, otherwise NULL is returned.  The caller is responsible for
  * ensuring that the hash table is protected with either a RCU read lock or the
  * hash table lock.
  *
@@ -165,7 +165,7 @@ static struct netlbl_dom_map *netlbl_domhsh_search(const char *domain)
  * Searches the domain hash table and returns a pointer to the hash table
  * entry if an exact match is found, if an exact match is not present in the
  * hash table then the default entry is returned if valid otherwise NULL is
- * returned.  The caller is responsibile ensuring that the hash table is
+ * returned.  The caller is responsible ensuring that the hash table is
  * protected with either a RCU read lock or the hash table lock.
  *
  */
@@ -193,7 +193,7 @@ static struct netlbl_dom_map *netlbl_domhsh_search_def(const char *domain)
  *
  * Description:
  * Generate an audit record for adding a new NetLabel/LSM mapping entry with
- * the given information.  Caller is responsibile for holding the necessary
+ * the given information.  Caller is responsible for holding the necessary
  * locks.
  *
  */
@@ -605,7 +605,7 @@ int netlbl_domhsh_remove_default(struct netlbl_audit *audit_info)
  *
  * Description:
  * Look through the domain hash table searching for an entry to match @domain,
- * return a pointer to a copy of the entry or NULL.  The caller is responsibile
+ * return a pointer to a copy of the entry or NULL.  The caller is responsible
  * for ensuring that rcu_read_[un]lock() is called.
  *
  */
diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c
index 998e85e895d..4f251b19fbc 100644
--- a/net/netlabel/netlabel_mgmt.c
+++ b/net/netlabel/netlabel_mgmt.c
@@ -259,7 +259,7 @@ add_failure:
  *
  * Description:
  * This function is a helper function used by the LISTALL and LISTDEF command
- * handlers.  The caller is responsibile for ensuring that the RCU read lock
+ * handlers.  The caller is responsible for ensuring that the RCU read lock
  * is held.  Returns zero on success, negative values on failure.
  *
  */
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index e2b0a680dd5..9c38658fba8 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -154,44 +154,6 @@ static const struct nla_policy netlbl_unlabel_genl_policy[NLBL_UNLABEL_A_MAX + 1
  */
 
 /**
- * netlbl_unlhsh_free_addr4 - Frees an IPv4 address entry from the hash table
- * @entry: the entry's RCU field
- *
- * Description:
- * This function is designed to be used as a callback to the call_rcu()
- * function so that memory allocated to a hash table address entry can be
- * released safely.
- *
- */
-static void netlbl_unlhsh_free_addr4(struct rcu_head *entry)
-{
-	struct netlbl_unlhsh_addr4 *ptr;
-
-	ptr = container_of(entry, struct netlbl_unlhsh_addr4, rcu);
-	kfree(ptr);
-}
-
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-/**
- * netlbl_unlhsh_free_addr6 - Frees an IPv6 address entry from the hash table
- * @entry: the entry's RCU field
- *
- * Description:
- * This function is designed to be used as a callback to the call_rcu()
- * function so that memory allocated to a hash table address entry can be
- * released safely.
- *
- */
-static void netlbl_unlhsh_free_addr6(struct rcu_head *entry)
-{
-	struct netlbl_unlhsh_addr6 *ptr;
-
-	ptr = container_of(entry, struct netlbl_unlhsh_addr6, rcu);
-	kfree(ptr);
-}
-#endif /* IPv6 */
-
-/**
  * netlbl_unlhsh_free_iface - Frees an interface entry from the hash table
  * @entry: the entry's RCU field
  *
@@ -568,7 +530,7 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 	if (entry == NULL)
 		return -ENOENT;
 
-	call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+	kfree_rcu(entry, rcu);
 	return 0;
 }
 
@@ -629,7 +591,7 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 	if (entry == NULL)
 		return -ENOENT;
 
-	call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+	kfree_rcu(entry, rcu);
 	return 0;
 }
 #endif /* IPv6 */
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index c8f35b5d2ee..5fe4f3b04ed 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1566,12 +1566,6 @@ netlink_kernel_release(struct sock *sk)
 }
 EXPORT_SYMBOL(netlink_kernel_release);
 
-
-static void listeners_free_rcu(struct rcu_head *head)
-{
-	kfree(container_of(head, struct listeners, rcu));
-}
-
 int __netlink_change_ngroups(struct sock *sk, unsigned int groups)
 {
 	struct listeners *new, *old;
@@ -1588,7 +1582,7 @@ int __netlink_change_ngroups(struct sock *sk, unsigned int groups)
 		memcpy(new->masks, old->masks, NLGRPSZ(tbl->groups));
 		rcu_assign_pointer(tbl->listeners, new);
 
-		call_rcu(&old->rcu, listeners_free_rcu);
+		kfree_rcu(old, rcu);
 	}
 	tbl->groups = groups;
 
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 06cb02796a0..732152f718e 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -591,7 +591,6 @@ static int nr_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 		return -EINVAL;
 	}
 	if ((dev = nr_dev_get(&addr->fsa_ax25.sax25_call)) == NULL) {
-		SOCK_DEBUG(sk, "NET/ROM: bind failed: invalid node callsign\n");
 		release_sock(sk);
 		return -EADDRNOTAVAIL;
 	}
@@ -632,7 +631,7 @@ static int nr_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 	sock_reset_flag(sk, SOCK_ZAPPED);
 	dev_put(dev);
 	release_sock(sk);
-	SOCK_DEBUG(sk, "NET/ROM: socket is bound\n");
+
 	return 0;
 }
 
@@ -1082,8 +1081,6 @@ static int nr_sendmsg(struct kiocb *iocb, struct socket *sock,
 		sax.sax25_call   = nr->dest_addr;
 	}
 
-	SOCK_DEBUG(sk, "NET/ROM: sendto: Addresses built.\n");
-
 	/* Build a packet - the conventional user limit is 236 bytes. We can
 	   do ludicrously large NetROM frames but must not overflow */
 	if (len > 65536) {
@@ -1091,7 +1088,6 @@ static int nr_sendmsg(struct kiocb *iocb, struct socket *sock,
 		goto out;
 	}
 
-	SOCK_DEBUG(sk, "NET/ROM: sendto: building packet.\n");
 	size = len + NR_NETWORK_LEN + NR_TRANSPORT_LEN;
 
 	if ((skb = sock_alloc_send_skb(sk, size, msg->msg_flags & MSG_DONTWAIT, &err)) == NULL)
@@ -1105,7 +1101,6 @@ static int nr_sendmsg(struct kiocb *iocb, struct socket *sock,
 	 */
 
 	asmptr = skb_push(skb, NR_TRANSPORT_LEN);
-	SOCK_DEBUG(sk, "Building NET/ROM Header.\n");
 
 	/* Build a NET/ROM Transport header */
 
@@ -1114,15 +1109,12 @@ static int nr_sendmsg(struct kiocb *iocb, struct socket *sock,
 	*asmptr++ = 0;		/* To be filled in later */
 	*asmptr++ = 0;		/*      Ditto            */
 	*asmptr++ = NR_INFO;
-	SOCK_DEBUG(sk, "Built header.\n");
 
 	/*
 	 *	Put the data on the end
 	 */
 	skb_put(skb, len);
 
-	SOCK_DEBUG(sk, "NET/ROM: Appending user data\n");
-
 	/* User data follows immediately after the NET/ROM transport header */
 	if (memcpy_fromiovec(skb_transport_header(skb), msg->msg_iov, len)) {
 		kfree_skb(skb);
@@ -1130,8 +1122,6 @@ static int nr_sendmsg(struct kiocb *iocb, struct socket *sock,
 		goto out;
 	}
 
-	SOCK_DEBUG(sk, "NET/ROM: Transmitting buffer\n");
-
 	if (sk->sk_state != TCP_ESTABLISHED) {
 		kfree_skb(skb);
 		err = -ENOTCONN;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index b5362e96022..549527bca87 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -538,7 +538,7 @@ static inline unsigned int run_filter(const struct sk_buff *skb,
 	rcu_read_lock();
 	filter = rcu_dereference(sk->sk_filter);
 	if (filter != NULL)
-		res = sk_run_filter(skb, filter->insns);
+		res = SK_RUN_FILTER(filter, skb);
 	rcu_read_unlock();
 
 	return res;
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 947038ddd04..d2df8f33160 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -162,14 +162,6 @@ int phonet_address_add(struct net_device *dev, u8 addr)
 	return err;
 }
 
-static void phonet_device_rcu_free(struct rcu_head *head)
-{
-	struct phonet_device *pnd;
-
-	pnd = container_of(head, struct phonet_device, rcu);
-	kfree(pnd);
-}
-
 int phonet_address_del(struct net_device *dev, u8 addr)
 {
 	struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
@@ -188,7 +180,7 @@ int phonet_address_del(struct net_device *dev, u8 addr)
 	mutex_unlock(&pndevs->lock);
 
 	if (pnd)
-		call_rcu(&pnd->rcu, phonet_device_rcu_free);
+		kfree_rcu(pnd, rcu);
 
 	return err;
 }
@@ -426,18 +418,14 @@ int phonet_route_del(struct net_device *dev, u8 daddr)
 	return 0;
 }
 
-struct net_device *phonet_route_get(struct net *net, u8 daddr)
+struct net_device *phonet_route_get_rcu(struct net *net, u8 daddr)
 {
 	struct phonet_net *pnn = phonet_pernet(net);
 	struct phonet_routes *routes = &pnn->routes;
 	struct net_device *dev;
 
-	ASSERT_RTNL(); /* no need to hold the device */
-
 	daddr >>= 2;
-	rcu_read_lock();
 	dev = rcu_dereference(routes->table[daddr]);
-	rcu_read_unlock();
 	return dev;
 }
 
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index 58b3b1f991e..438accb7a5a 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -264,10 +264,11 @@ static int route_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
 	struct net *net = sock_net(skb->sk);
 	u8 addr, addr_idx = 0, addr_start_idx = cb->args[0];
 
+	rcu_read_lock();
 	for (addr = 0; addr < 64; addr++) {
 		struct net_device *dev;
 
-		dev = phonet_route_get(net, addr << 2);
+		dev = phonet_route_get_rcu(net, addr << 2);
 		if (!dev)
 			continue;
 
@@ -279,6 +280,7 @@ static int route_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
 	}
 
 out:
+	rcu_read_unlock();
 	cb->args[0] = addr_idx;
 	cb->args[1] = 0;
 
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index b1adafab377..8c5bfcef92c 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -52,7 +52,7 @@ static int pn_socket_release(struct socket *sock)
 
 static struct  {
 	struct hlist_head hlist[PN_HASHSIZE];
-	spinlock_t lock;
+	struct mutex lock;
 } pnsocks;
 
 void __init pn_sock_init(void)
@@ -61,7 +61,7 @@ void __init pn_sock_init(void)
 
 	for (i = 0; i < PN_HASHSIZE; i++)
 		INIT_HLIST_HEAD(pnsocks.hlist + i);
-	spin_lock_init(&pnsocks.lock);
+	mutex_init(&pnsocks.lock);
 }
 
 static struct hlist_head *pn_hash_list(u16 obj)
@@ -82,9 +82,8 @@ struct sock *pn_find_sock_by_sa(struct net *net, const struct sockaddr_pn *spn)
 	u8 res = spn->spn_resource;
 	struct hlist_head *hlist = pn_hash_list(obj);
 
-	spin_lock_bh(&pnsocks.lock);
-
-	sk_for_each(sknode, node, hlist) {
+	rcu_read_lock();
+	sk_for_each_rcu(sknode, node, hlist) {
 		struct pn_sock *pn = pn_sk(sknode);
 		BUG_ON(!pn->sobject); /* unbound socket */
 
@@ -107,8 +106,7 @@ struct sock *pn_find_sock_by_sa(struct net *net, const struct sockaddr_pn *spn)
 		sock_hold(sknode);
 		break;
 	}
-
-	spin_unlock_bh(&pnsocks.lock);
+	rcu_read_unlock();
 
 	return rval;
 }
@@ -119,7 +117,7 @@ void pn_deliver_sock_broadcast(struct net *net, struct sk_buff *skb)
 	struct hlist_head *hlist = pnsocks.hlist;
 	unsigned h;
 
-	spin_lock(&pnsocks.lock);
+	rcu_read_lock();
 	for (h = 0; h < PN_HASHSIZE; h++) {
 		struct hlist_node *node;
 		struct sock *sknode;
@@ -140,25 +138,26 @@ void pn_deliver_sock_broadcast(struct net *net, struct sk_buff *skb)
 		}
 		hlist++;
 	}
-	spin_unlock(&pnsocks.lock);
+	rcu_read_unlock();
 }
 
 void pn_sock_hash(struct sock *sk)
 {
 	struct hlist_head *hlist = pn_hash_list(pn_sk(sk)->sobject);
 
-	spin_lock_bh(&pnsocks.lock);
-	sk_add_node(sk, hlist);
-	spin_unlock_bh(&pnsocks.lock);
+	mutex_lock(&pnsocks.lock);
+	sk_add_node_rcu(sk, hlist);
+	mutex_unlock(&pnsocks.lock);
 }
 EXPORT_SYMBOL(pn_sock_hash);
 
 void pn_sock_unhash(struct sock *sk)
 {
-	spin_lock_bh(&pnsocks.lock);
-	sk_del_node_init(sk);
-	spin_unlock_bh(&pnsocks.lock);
+	mutex_lock(&pnsocks.lock);
+	sk_del_node_init_rcu(sk);
+	mutex_unlock(&pnsocks.lock);
 	pn_sock_unbind_all_res(sk);
+	synchronize_rcu();
 }
 EXPORT_SYMBOL(pn_sock_unhash);
 
@@ -548,7 +547,7 @@ static struct sock *pn_sock_get_idx(struct seq_file *seq, loff_t pos)
 	unsigned h;
 
 	for (h = 0; h < PN_HASHSIZE; h++) {
-		sk_for_each(sknode, node, hlist) {
+		sk_for_each_rcu(sknode, node, hlist) {
 			if (!net_eq(net, sock_net(sknode)))
 				continue;
 			if (!pos)
@@ -572,9 +571,9 @@ static struct sock *pn_sock_get_next(struct seq_file *seq, struct sock *sk)
 }
 
 static void *pn_sock_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(pnsocks.lock)
+	__acquires(rcu)
 {
-	spin_lock_bh(&pnsocks.lock);
+	rcu_read_lock();
 	return *pos ? pn_sock_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
 }
 
@@ -591,9 +590,9 @@ static void *pn_sock_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 }
 
 static void pn_sock_seq_stop(struct seq_file *seq, void *v)
-	__releases(pnsocks.lock)
+	__releases(rcu)
 {
-	spin_unlock_bh(&pnsocks.lock);
+	rcu_read_unlock();
 }
 
 static int pn_sock_seq_show(struct seq_file *seq, void *v)
@@ -721,13 +720,11 @@ void pn_sock_unbind_all_res(struct sock *sk)
 	}
 	mutex_unlock(&resource_mutex);
 
-	if (match == 0)
-		return;
-	synchronize_rcu();
 	while (match > 0) {
-		sock_put(sk);
+		__sock_put(sk);
 		match--;
 	}
+	/* Caller is responsible for RCU sync before final sock_put() */
 }
 
 #ifdef CONFIG_PROC_FS
diff --git a/net/rds/ib_send.c b/net/rds/ib_send.c
index c47a511f203..7c4dce8fa5e 100644
--- a/net/rds/ib_send.c
+++ b/net/rds/ib_send.c
@@ -355,7 +355,7 @@ void rds_ib_send_cq_comp_handler(struct ib_cq *cq, void *context)
  *
  * Conceptually, we have two counters:
  *  -	send credits: this tells us how many WRs we're allowed
- *	to submit without overruning the reciever's queue. For
+ *	to submit without overruning the receiver's queue. For
  *	each SEND WR we post, we decrement this by one.
  *
  *  -	posted credits: this tells us how many WRs we recently
diff --git a/net/rds/iw_cm.c b/net/rds/iw_cm.c
index 712cf2d1f28..3a60a15d1b4 100644
--- a/net/rds/iw_cm.c
+++ b/net/rds/iw_cm.c
@@ -181,7 +181,7 @@ static int rds_iw_init_qp_attrs(struct ib_qp_init_attr *attr,
 	unsigned int send_size, recv_size;
 	int ret;
 
-	/* The offset of 1 is to accomodate the additional ACK WR. */
+	/* The offset of 1 is to accommodate the additional ACK WR. */
 	send_size = min_t(unsigned int, rds_iwdev->max_wrs, rds_iw_sysctl_max_send_wr + 1);
 	recv_size = min_t(unsigned int, rds_iwdev->max_wrs, rds_iw_sysctl_max_recv_wr + 1);
 	rds_iw_ring_resize(send_ring, send_size - 1);
diff --git a/net/rds/iw_rdma.c b/net/rds/iw_rdma.c
index 59509e9a9e7..6deaa77495e 100644
--- a/net/rds/iw_rdma.c
+++ b/net/rds/iw_rdma.c
@@ -122,7 +122,7 @@ static int rds_iw_get_device(struct rds_sock *rs, struct rds_iw_device **rds_iwd
 #else
 			/* FIXME - needs to compare the local and remote
 			 * ipaddr/port tuple, but the ipaddr is the only
-			 * available infomation in the rds_sock (as the rest are
+			 * available information in the rds_sock (as the rest are
 			 * zero'ed.  It doesn't appear to be properly populated
 			 * during connection setup...
 			 */
diff --git a/net/rds/iw_send.c b/net/rds/iw_send.c
index 6280ea020d4..545d8ee3efb 100644
--- a/net/rds/iw_send.c
+++ b/net/rds/iw_send.c
@@ -307,7 +307,7 @@ void rds_iw_send_cq_comp_handler(struct ib_cq *cq, void *context)
  *
  * Conceptually, we have two counters:
  *  -	send credits: this tells us how many WRs we're allowed
- *	to submit without overruning the reciever's queue. For
+ *	to submit without overruning the receiver's queue. For
  *	each SEND WR we post, we decrement this by one.
  *
  *  -	posted credits: this tells us how many WRs we recently
diff --git a/net/rds/send.c b/net/rds/send.c
index 35b9c2e9caf..d58ae5f9339 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -116,7 +116,7 @@ static void release_in_xmit(struct rds_connection *conn)
 }
 
 /*
- * We're making the concious trade-off here to only send one message
+ * We're making the conscious trade-off here to only send one message
  * down the connection at a time.
  *   Pro:
  *      - tx queueing is a simple fifo list
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index a80aef6e3d1..f9ea925ad9c 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -682,10 +682,8 @@ static int rose_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 	if ((unsigned int) addr->srose_ndigis > ROSE_MAX_DIGIS)
 		return -EINVAL;
 
-	if ((dev = rose_dev_get(&addr->srose_addr)) == NULL) {
-		SOCK_DEBUG(sk, "ROSE: bind failed: invalid address\n");
+	if ((dev = rose_dev_get(&addr->srose_addr)) == NULL)
 		return -EADDRNOTAVAIL;
-	}
 
 	source = &addr->srose_call;
 
@@ -716,7 +714,7 @@ static int rose_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
 	rose_insert_socket(sk);
 
 	sock_reset_flag(sk, SOCK_ZAPPED);
-	SOCK_DEBUG(sk, "ROSE: socket is bound\n");
+
 	return 0;
 }
 
@@ -1109,10 +1107,7 @@ static int rose_sendmsg(struct kiocb *iocb, struct socket *sock,
 			srose.srose_digis[n] = rose->dest_digis[n];
 	}
 
-	SOCK_DEBUG(sk, "ROSE: sendto: Addresses built.\n");
-
 	/* Build a packet */
-	SOCK_DEBUG(sk, "ROSE: sendto: building packet.\n");
 	/* Sanity check the packet size */
 	if (len > 65535)
 		return -EMSGSIZE;
@@ -1127,7 +1122,6 @@ static int rose_sendmsg(struct kiocb *iocb, struct socket *sock,
 	/*
 	 *	Put the data on the end
 	 */
-	SOCK_DEBUG(sk, "ROSE: Appending user data\n");
 
 	skb_reset_transport_header(skb);
 	skb_put(skb, len);
@@ -1152,8 +1146,6 @@ static int rose_sendmsg(struct kiocb *iocb, struct socket *sock,
 	 */
 	asmptr = skb_push(skb, ROSE_MIN_LEN);
 
-	SOCK_DEBUG(sk, "ROSE: Building Network Header.\n");
-
 	/* Build a ROSE Network header */
 	asmptr[0] = ((rose->lci >> 8) & 0x0F) | ROSE_GFI;
 	asmptr[1] = (rose->lci >> 0) & 0xFF;
@@ -1162,10 +1154,6 @@ static int rose_sendmsg(struct kiocb *iocb, struct socket *sock,
 	if (qbit)
 		asmptr[0] |= ROSE_Q_BIT;
 
-	SOCK_DEBUG(sk, "ROSE: Built header.\n");
-
-	SOCK_DEBUG(sk, "ROSE: Transmitting buffer\n");
-
 	if (sk->sk_state != TCP_ESTABLISHED) {
 		kfree_skb(skb);
 		return -ENOTCONN;
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index 08dcd2f29cd..479cae57d18 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -587,7 +587,7 @@ static int rose_clear_routes(void)
 
 /*
  *	Check that the device given is a valid AX.25 interface that is "up".
- * 	called whith RTNL
+ * 	called with RTNL
  */
 static struct net_device *rose_ax25_dev_find(char *devname)
 {
diff --git a/net/rxrpc/ar-ack.c b/net/rxrpc/ar-ack.c
index b6ffe4e1b84..f99cfce7ca9 100644
--- a/net/rxrpc/ar-ack.c
+++ b/net/rxrpc/ar-ack.c
@@ -375,7 +375,6 @@ protocol_error:
  */
 static void rxrpc_rotate_tx_window(struct rxrpc_call *call, u32 hard)
 {
-	struct rxrpc_skb_priv *sp;
 	unsigned long _skb;
 	int tail = call->acks_tail, old_tail;
 	int win = CIRC_CNT(call->acks_head, tail, call->acks_winsz);
@@ -387,7 +386,6 @@ static void rxrpc_rotate_tx_window(struct rxrpc_call *call, u32 hard)
 	while (call->acks_hard < hard) {
 		smp_read_barrier_depends();
 		_skb = call->acks_window[tail] & ~1;
-		sp = rxrpc_skb((struct sk_buff *) _skb);
 		rxrpc_free_skb((struct sk_buff *) _skb);
 		old_tail = tail;
 		tail = (tail + 1) & (call->acks_winsz - 1);
diff --git a/net/rxrpc/ar-connevent.c b/net/rxrpc/ar-connevent.c
index 0505cdc4d6d..e7ed43a54c4 100644
--- a/net/rxrpc/ar-connevent.c
+++ b/net/rxrpc/ar-connevent.c
@@ -259,7 +259,6 @@ void rxrpc_process_connection(struct work_struct *work)
 {
 	struct rxrpc_connection *conn =
 		container_of(work, struct rxrpc_connection, processor);
-	struct rxrpc_skb_priv *sp;
 	struct sk_buff *skb;
 	u32 abort_code = RX_PROTOCOL_ERROR;
 	int ret;
@@ -276,8 +275,6 @@ void rxrpc_process_connection(struct work_struct *work)
 	/* go through the conn-level event packets, releasing the ref on this
 	 * connection that each one has when we've finished with it */
 	while ((skb = skb_dequeue(&conn->rx_queue))) {
-		sp = rxrpc_skb(skb);
-
 		ret = rxrpc_process_event(conn, skb, &abort_code);
 		switch (ret) {
 		case -EPROTO:
diff --git a/net/rxrpc/ar-error.c b/net/rxrpc/ar-error.c
index d4d1ae26d29..5d6b572a670 100644
--- a/net/rxrpc/ar-error.c
+++ b/net/rxrpc/ar-error.c
@@ -139,7 +139,7 @@ void rxrpc_UDP_error_handler(struct work_struct *work)
 	struct rxrpc_transport *trans =
 		container_of(work, struct rxrpc_transport, error_handler);
 	struct sk_buff *skb;
-	int local, err;
+	int err;
 
 	_enter("");
 
@@ -157,7 +157,6 @@ void rxrpc_UDP_error_handler(struct work_struct *work)
 
 	switch (ee->ee_origin) {
 	case SO_EE_ORIGIN_ICMP:
-		local = 0;
 		switch (ee->ee_type) {
 		case ICMP_DEST_UNREACH:
 			switch (ee->ee_code) {
@@ -207,7 +206,6 @@ void rxrpc_UDP_error_handler(struct work_struct *work)
 	case SO_EE_ORIGIN_LOCAL:
 		_proto("Rx Received local error { error=%d }",
 		       ee->ee_errno);
-		local = 1;
 		break;
 
 	case SO_EE_ORIGIN_NONE:
@@ -215,7 +213,6 @@ void rxrpc_UDP_error_handler(struct work_struct *work)
 	default:
 		_proto("Rx Received error report { orig=%u }",
 		       ee->ee_origin);
-		local = 0;
 		break;
 	}
 
diff --git a/net/rxrpc/ar-peer.c b/net/rxrpc/ar-peer.c
index 55b93dc60d0..2754f098d43 100644
--- a/net/rxrpc/ar-peer.c
+++ b/net/rxrpc/ar-peer.c
@@ -36,10 +36,11 @@ static void rxrpc_destroy_peer(struct work_struct *work);
 static void rxrpc_assess_MTU_size(struct rxrpc_peer *peer)
 {
 	struct rtable *rt;
+	struct flowi4 fl4;
 
 	peer->if_mtu = 1500;
 
-	rt = ip_route_output_ports(&init_net, NULL,
+	rt = ip_route_output_ports(&init_net, &fl4, NULL,
 				   peer->srx.transport.sin.sin_addr.s_addr, 0,
 				   htons(7000), htons(7001),
 				   IPPROTO_UDP, 0, 0);
@@ -156,6 +157,7 @@ struct rxrpc_peer *rxrpc_get_peer(struct sockaddr_rxrpc *srx, gfp_t gfp)
 	/* we can now add the new candidate to the list */
 	peer = candidate;
 	candidate = NULL;
+	usage = atomic_read(&peer->usage);
 
 	list_add_tail(&peer->link, &rxrpc_peers);
 	write_unlock_bh(&rxrpc_peer_lock);
@@ -170,7 +172,7 @@ success:
 	     &peer->srx.transport.sin.sin_addr,
 	     ntohs(peer->srx.transport.sin.sin_port));
 
-	_leave(" = %p {u=%d}", peer, atomic_read(&peer->usage));
+	_leave(" = %p {u=%d}", peer, usage);
 	return peer;
 
 	/* we found the peer in the list immediately */
diff --git a/net/rxrpc/ar-transport.c b/net/rxrpc/ar-transport.c
index 5e0226fe587..92df566930b 100644
--- a/net/rxrpc/ar-transport.c
+++ b/net/rxrpc/ar-transport.c
@@ -111,6 +111,7 @@ struct rxrpc_transport *rxrpc_get_transport(struct rxrpc_local *local,
 	/* we can now add the new candidate to the list */
 	trans = candidate;
 	candidate = NULL;
+	usage = atomic_read(&trans->usage);
 
 	rxrpc_get_local(trans->local);
 	atomic_inc(&trans->peer->usage);
@@ -125,7 +126,7 @@ success:
 	     trans->local->debug_id,
 	     trans->peer->debug_id);
 
-	_leave(" = %p {u=%d}", trans, atomic_read(&trans->usage));
+	_leave(" = %p {u=%d}", trans, usage);
 	return trans;
 
 	/* we found the transport in the list immediately */
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index a7a5583d4f6..2590e91b328 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -239,6 +239,17 @@ config NET_SCH_CHOKE
 	  To compile this code as a module, choose M here: the
 	  module will be called sch_choke.
 
+config NET_SCH_QFQ
+	tristate "Quick Fair Queueing scheduler (QFQ)"
+	help
+	  Say Y here if you want to use the Quick Fair Queueing Scheduler (QFQ)
+	  packet scheduling algorithm.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sch_qfq.
+
+	  If unsure, say N.
+
 config NET_SCH_INGRESS
 	tristate "Ingress Qdisc"
 	depends on NET_CLS_ACT
@@ -277,6 +288,7 @@ config NET_CLS_TCINDEX
 
 config NET_CLS_ROUTE4
 	tristate "Routing decision (ROUTE)"
+	depends on INET
 	select IP_ROUTE_CLASSID
 	select NET_CLS
 	---help---
diff --git a/net/sched/Makefile b/net/sched/Makefile
index 2e77b8dba22..dc5889c0a15 100644
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_NET_SCH_NETEM)	+= sch_netem.o
 obj-$(CONFIG_NET_SCH_DRR)	+= sch_drr.o
 obj-$(CONFIG_NET_SCH_MQPRIO)	+= sch_mqprio.o
 obj-$(CONFIG_NET_SCH_CHOKE)	+= sch_choke.o
+obj-$(CONFIG_NET_SCH_QFQ)	+= sch_qfq.o
 
 obj-$(CONFIG_NET_CLS_U32)	+= cls_u32.o
 obj-$(CONFIG_NET_CLS_ROUTE4)	+= cls_route.o
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 15873e14cb5..a606025814a 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -26,11 +26,6 @@
 #include <net/act_api.h>
 #include <net/netlink.h>
 
-static void tcf_common_free_rcu(struct rcu_head *head)
-{
-	kfree(container_of(head, struct tcf_common, tcfc_rcu));
-}
-
 void tcf_hash_destroy(struct tcf_common *p, struct tcf_hashinfo *hinfo)
 {
 	unsigned int h = tcf_hash(p->tcfc_index, hinfo->hmask);
@@ -47,7 +42,7 @@ void tcf_hash_destroy(struct tcf_common *p, struct tcf_hashinfo *hinfo)
 			 * gen_estimator est_timer() might access p->tcfc_lock
 			 * or bstats, wait a RCU grace period before freeing p
 			 */
-			call_rcu(&p->tcfc_rcu, tcf_common_free_rcu);
+			kfree_rcu(p, tcfc_rcu);
 			return;
 		}
 	}
@@ -999,7 +994,7 @@ static int tc_ctl_action(struct sk_buff *skb, struct nlmsghdr *n, void *arg)
 	switch (n->nlmsg_type) {
 	case RTM_NEWACTION:
 		/* we are going to assume all other flags
-		 * imply create only if it doesnt exist
+		 * imply create only if it doesn't exist
 		 * Note that CREATE | EXCL implies that
 		 * but since we want avoid ambiguity (eg when flags
 		 * is zero) then just set this
diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c
index 50c7c06c019..7affe9a9275 100644
--- a/net/sched/act_pedit.c
+++ b/net/sched/act_pedit.c
@@ -161,7 +161,7 @@ static int tcf_pedit(struct sk_buff *skb, struct tc_action *a,
 			}
 			if (offset > 0 && offset > skb->len) {
 				pr_info("tc filter pedit"
-					" offset %d cant exceed pkt length %d\n",
+					" offset %d can't exceed pkt length %d\n",
 				       offset, skb->len);
 				goto bad;
 			}
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index 8a1630774fd..b3b9b32f4e0 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -96,11 +96,6 @@ nla_put_failure:
 	goto done;
 }
 
-static void tcf_police_free_rcu(struct rcu_head *head)
-{
-	kfree(container_of(head, struct tcf_police, tcf_rcu));
-}
-
 static void tcf_police_destroy(struct tcf_police *p)
 {
 	unsigned int h = tcf_hash(p->tcf_index, POL_TAB_MASK);
@@ -121,7 +116,7 @@ static void tcf_police_destroy(struct tcf_police *p)
 			 * gen_estimator est_timer() might access p->tcf_lock
 			 * or bstats, wait a RCU grace period before freeing p
 			 */
-			call_rcu(&p->tcf_rcu, tcf_police_free_rcu);
+			kfree_rcu(p, tcf_rcu);
 			return;
 		}
 	}
@@ -401,7 +396,6 @@ static void __exit
 police_cleanup_module(void)
 {
 	tcf_unregister_action(&act_police_ops);
-	rcu_barrier(); /* Wait for completion of call_rcu()'s (tcf_police_free_rcu) */
 }
 
 module_init(police_init_module);
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index a4de67eca82..49130e8abff 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -47,7 +47,7 @@
  * 	on the meta type. Obviously, the length of the data must also
  * 	be provided for non-numeric types.
  *
- * 	Additionaly, type dependant modifiers such as shift operators
+ * 	Additionally, type dependent modifiers such as shift operators
  * 	or mask may be applied to extend the functionaliy. As of now,
  * 	the variable length type supports shifting the byte string to
  * 	the right, eating up any number of octets and thus supporting
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 7490f3f2db8..6b8627661c9 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1673,10 +1673,8 @@ int tc_classify(struct sk_buff *skb, struct tcf_proto *tp,
 {
 	int err = 0;
 #ifdef CONFIG_NET_CLS_ACT
-	__be16 protocol;
 	struct tcf_proto *otp = tp;
 reclassify:
-	protocol = skb->protocol;
 #endif
 
 	err = tc_classify_compat(skb, tp, res);
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index e1429a85091..29b942ce9e8 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -183,7 +183,7 @@ static inline struct htb_class *htb_find(u32 handle, struct Qdisc *sch)
  * filters in qdisc and in inner nodes (if higher filter points to the inner
  * node). If we end up with classid MAJOR:0 we enqueue the skb into special
  * internal fifo (direct). These packets then go directly thru. If we still
- * have no valid leaf we try to use MAJOR:default leaf. It still unsuccessfull
+ * have no valid leaf we try to use MAJOR:default leaf. It still unsuccessful
  * then finish and return direct queue.
  */
 #define HTB_DIRECT ((struct htb_class *)-1L)
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index edbbf7ad662..69c35f6cd13 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -160,7 +160,7 @@ static bool loss_4state(struct netem_sched_data *q)
 	u32 rnd = net_random();
 
 	/*
-	 * Makes a comparision between rnd and the transition
+	 * Makes a comparison between rnd and the transition
 	 * probabilities outgoing from the current state, then decides the
 	 * next state and if the next packet has to be transmitted or lost.
 	 * The four states correspond to:
@@ -212,9 +212,9 @@ static bool loss_4state(struct netem_sched_data *q)
  * Generates losses according to the Gilbert-Elliot loss model or
  * its special cases  (Gilbert or Simple Gilbert)
  *
- * Makes a comparision between random number and the transition
+ * Makes a comparison between random number and the transition
  * probabilities outgoing from the current state, then decides the
- * next state. A second random number is extracted and the comparision
+ * next state. A second random number is extracted and the comparison
  * with the loss probability of the current state decides if the next
  * packet will be transmitted or lost.
  */
diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
new file mode 100644
index 00000000000..10334340859
--- /dev/null
+++ b/net/sched/sch_qfq.c
@@ -0,0 +1,1137 @@
+/*
+ * net/sched/sch_qfq.c         Quick Fair Queueing Scheduler.
+ *
+ * Copyright (c) 2009 Fabio Checconi, Luigi Rizzo, and Paolo Valente.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/pkt_sched.h>
+#include <net/sch_generic.h>
+#include <net/pkt_sched.h>
+#include <net/pkt_cls.h>
+
+
+/*  Quick Fair Queueing
+    ===================
+
+    Sources:
+
+    Fabio Checconi, Luigi Rizzo, and Paolo Valente: "QFQ: Efficient
+    Packet Scheduling with Tight Bandwidth Distribution Guarantees."
+
+    See also:
+    http://retis.sssup.it/~fabio/linux/qfq/
+ */
+
+/*
+
+  Virtual time computations.
+
+  S, F and V are all computed in fixed point arithmetic with
+  FRAC_BITS decimal bits.
+
+  QFQ_MAX_INDEX is the maximum index allowed for a group. We need
+	one bit per index.
+  QFQ_MAX_WSHIFT is the maximum power of two supported as a weight.
+
+  The layout of the bits is as below:
+
+                   [ MTU_SHIFT ][      FRAC_BITS    ]
+                   [ MAX_INDEX    ][ MIN_SLOT_SHIFT ]
+				 ^.__grp->index = 0
+				 *.__grp->slot_shift
+
+  where MIN_SLOT_SHIFT is derived by difference from the others.
+
+  The max group index corresponds to Lmax/w_min, where
+  Lmax=1<<MTU_SHIFT, w_min = 1 .
+  From this, and knowing how many groups (MAX_INDEX) we want,
+  we can derive the shift corresponding to each group.
+
+  Because we often need to compute
+	F = S + len/w_i  and V = V + len/wsum
+  instead of storing w_i store the value
+	inv_w = (1<<FRAC_BITS)/w_i
+  so we can do F = S + len * inv_w * wsum.
+  We use W_TOT in the formulas so we can easily move between
+  static and adaptive weight sum.
+
+  The per-scheduler-instance data contain all the data structures
+  for the scheduler: bitmaps and bucket lists.
+
+ */
+
+/*
+ * Maximum number of consecutive slots occupied by backlogged classes
+ * inside a group.
+ */
+#define QFQ_MAX_SLOTS	32
+
+/*
+ * Shifts used for class<->group mapping.  We allow class weights that are
+ * in the range [1, 2^MAX_WSHIFT], and we try to map each class i to the
+ * group with the smallest index that can support the L_i / r_i configured
+ * for the class.
+ *
+ * grp->index is the index of the group; and grp->slot_shift
+ * is the shift for the corresponding (scaled) sigma_i.
+ */
+#define QFQ_MAX_INDEX		19
+#define QFQ_MAX_WSHIFT		16
+
+#define	QFQ_MAX_WEIGHT		(1<<QFQ_MAX_WSHIFT)
+#define QFQ_MAX_WSUM		(2*QFQ_MAX_WEIGHT)
+
+#define FRAC_BITS		30	/* fixed point arithmetic */
+#define ONE_FP			(1UL << FRAC_BITS)
+#define IWSUM			(ONE_FP/QFQ_MAX_WSUM)
+
+#define QFQ_MTU_SHIFT		11
+#define QFQ_MIN_SLOT_SHIFT	(FRAC_BITS + QFQ_MTU_SHIFT - QFQ_MAX_INDEX)
+
+/*
+ * Possible group states.  These values are used as indexes for the bitmaps
+ * array of struct qfq_queue.
+ */
+enum qfq_state { ER, IR, EB, IB, QFQ_MAX_STATE };
+
+struct qfq_group;
+
+struct qfq_class {
+	struct Qdisc_class_common common;
+
+	unsigned int refcnt;
+	unsigned int filter_cnt;
+
+	struct gnet_stats_basic_packed bstats;
+	struct gnet_stats_queue qstats;
+	struct gnet_stats_rate_est rate_est;
+	struct Qdisc *qdisc;
+
+	struct hlist_node next;	/* Link for the slot list. */
+	u64 S, F;		/* flow timestamps (exact) */
+
+	/* group we belong to. In principle we would need the index,
+	 * which is log_2(lmax/weight), but we never reference it
+	 * directly, only the group.
+	 */
+	struct qfq_group *grp;
+
+	/* these are copied from the flowset. */
+	u32	inv_w;		/* ONE_FP/weight */
+	u32	lmax;		/* Max packet size for this flow. */
+};
+
+struct qfq_group {
+	u64 S, F;			/* group timestamps (approx). */
+	unsigned int slot_shift;	/* Slot shift. */
+	unsigned int index;		/* Group index. */
+	unsigned int front;		/* Index of the front slot. */
+	unsigned long full_slots;	/* non-empty slots */
+
+	/* Array of RR lists of active classes. */
+	struct hlist_head slots[QFQ_MAX_SLOTS];
+};
+
+struct qfq_sched {
+	struct tcf_proto *filter_list;
+	struct Qdisc_class_hash clhash;
+
+	u64		V;		/* Precise virtual time. */
+	u32		wsum;		/* weight sum */
+
+	unsigned long bitmaps[QFQ_MAX_STATE];	    /* Group bitmaps. */
+	struct qfq_group groups[QFQ_MAX_INDEX + 1]; /* The groups. */
+};
+
+static struct qfq_class *qfq_find_class(struct Qdisc *sch, u32 classid)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct Qdisc_class_common *clc;
+
+	clc = qdisc_class_find(&q->clhash, classid);
+	if (clc == NULL)
+		return NULL;
+	return container_of(clc, struct qfq_class, common);
+}
+
+static void qfq_purge_queue(struct qfq_class *cl)
+{
+	unsigned int len = cl->qdisc->q.qlen;
+
+	qdisc_reset(cl->qdisc);
+	qdisc_tree_decrease_qlen(cl->qdisc, len);
+}
+
+static const struct nla_policy qfq_policy[TCA_QFQ_MAX + 1] = {
+	[TCA_QFQ_WEIGHT] = { .type = NLA_U32 },
+	[TCA_QFQ_LMAX] = { .type = NLA_U32 },
+};
+
+/*
+ * Calculate a flow index, given its weight and maximum packet length.
+ * index = log_2(maxlen/weight) but we need to apply the scaling.
+ * This is used only once at flow creation.
+ */
+static int qfq_calc_index(u32 inv_w, unsigned int maxlen)
+{
+	u64 slot_size = (u64)maxlen * inv_w;
+	unsigned long size_map;
+	int index = 0;
+
+	size_map = slot_size >> QFQ_MIN_SLOT_SHIFT;
+	if (!size_map)
+		goto out;
+
+	index = __fls(size_map) + 1;	/* basically a log_2 */
+	index -= !(slot_size - (1ULL << (index + QFQ_MIN_SLOT_SHIFT - 1)));
+
+	if (index < 0)
+		index = 0;
+out:
+	pr_debug("qfq calc_index: W = %lu, L = %u, I = %d\n",
+		 (unsigned long) ONE_FP/inv_w, maxlen, index);
+
+	return index;
+}
+
+static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
+			    struct nlattr **tca, unsigned long *arg)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl = (struct qfq_class *)*arg;
+	struct nlattr *tb[TCA_QFQ_MAX + 1];
+	u32 weight, lmax, inv_w;
+	int i, err;
+
+	if (tca[TCA_OPTIONS] == NULL) {
+		pr_notice("qfq: no options\n");
+		return -EINVAL;
+	}
+
+	err = nla_parse_nested(tb, TCA_QFQ_MAX, tca[TCA_OPTIONS], qfq_policy);
+	if (err < 0)
+		return err;
+
+	if (tb[TCA_QFQ_WEIGHT]) {
+		weight = nla_get_u32(tb[TCA_QFQ_WEIGHT]);
+		if (!weight || weight > (1UL << QFQ_MAX_WSHIFT)) {
+			pr_notice("qfq: invalid weight %u\n", weight);
+			return -EINVAL;
+		}
+	} else
+		weight = 1;
+
+	inv_w = ONE_FP / weight;
+	weight = ONE_FP / inv_w;
+	if (q->wsum + weight > QFQ_MAX_WSUM) {
+		pr_notice("qfq: total weight out of range (%u + %u)\n",
+			  weight, q->wsum);
+		return -EINVAL;
+	}
+
+	if (tb[TCA_QFQ_LMAX]) {
+		lmax = nla_get_u32(tb[TCA_QFQ_LMAX]);
+		if (!lmax || lmax > (1UL << QFQ_MTU_SHIFT)) {
+			pr_notice("qfq: invalid max length %u\n", lmax);
+			return -EINVAL;
+		}
+	} else
+		lmax = 1UL << QFQ_MTU_SHIFT;
+
+	if (cl != NULL) {
+		if (tca[TCA_RATE]) {
+			err = gen_replace_estimator(&cl->bstats, &cl->rate_est,
+						    qdisc_root_sleeping_lock(sch),
+						    tca[TCA_RATE]);
+			if (err)
+				return err;
+		}
+
+		sch_tree_lock(sch);
+		if (tb[TCA_QFQ_WEIGHT]) {
+			q->wsum = weight - ONE_FP / cl->inv_w;
+			cl->inv_w = inv_w;
+		}
+		sch_tree_unlock(sch);
+
+		return 0;
+	}
+
+	cl = kzalloc(sizeof(struct qfq_class), GFP_KERNEL);
+	if (cl == NULL)
+		return -ENOBUFS;
+
+	cl->refcnt = 1;
+	cl->common.classid = classid;
+	cl->lmax = lmax;
+	cl->inv_w = inv_w;
+	i = qfq_calc_index(cl->inv_w, cl->lmax);
+
+	cl->grp = &q->groups[i];
+	q->wsum += weight;
+
+	cl->qdisc = qdisc_create_dflt(sch->dev_queue,
+				      &pfifo_qdisc_ops, classid);
+	if (cl->qdisc == NULL)
+		cl->qdisc = &noop_qdisc;
+
+	if (tca[TCA_RATE]) {
+		err = gen_new_estimator(&cl->bstats, &cl->rate_est,
+					qdisc_root_sleeping_lock(sch),
+					tca[TCA_RATE]);
+		if (err) {
+			qdisc_destroy(cl->qdisc);
+			kfree(cl);
+			return err;
+		}
+	}
+
+	sch_tree_lock(sch);
+	qdisc_class_hash_insert(&q->clhash, &cl->common);
+	sch_tree_unlock(sch);
+
+	qdisc_class_hash_grow(sch, &q->clhash);
+
+	*arg = (unsigned long)cl;
+	return 0;
+}
+
+static void qfq_destroy_class(struct Qdisc *sch, struct qfq_class *cl)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+
+	if (cl->inv_w) {
+		q->wsum -= ONE_FP / cl->inv_w;
+		cl->inv_w = 0;
+	}
+
+	gen_kill_estimator(&cl->bstats, &cl->rate_est);
+	qdisc_destroy(cl->qdisc);
+	kfree(cl);
+}
+
+static int qfq_delete_class(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	if (cl->filter_cnt > 0)
+		return -EBUSY;
+
+	sch_tree_lock(sch);
+
+	qfq_purge_queue(cl);
+	qdisc_class_hash_remove(&q->clhash, &cl->common);
+
+	BUG_ON(--cl->refcnt == 0);
+	/*
+	 * This shouldn't happen: we "hold" one cops->get() when called
+	 * from tc_ctl_tclass; the destroy method is done from cops->put().
+	 */
+
+	sch_tree_unlock(sch);
+	return 0;
+}
+
+static unsigned long qfq_get_class(struct Qdisc *sch, u32 classid)
+{
+	struct qfq_class *cl = qfq_find_class(sch, classid);
+
+	if (cl != NULL)
+		cl->refcnt++;
+
+	return (unsigned long)cl;
+}
+
+static void qfq_put_class(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	if (--cl->refcnt == 0)
+		qfq_destroy_class(sch, cl);
+}
+
+static struct tcf_proto **qfq_tcf_chain(struct Qdisc *sch, unsigned long cl)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+
+	if (cl)
+		return NULL;
+
+	return &q->filter_list;
+}
+
+static unsigned long qfq_bind_tcf(struct Qdisc *sch, unsigned long parent,
+				  u32 classid)
+{
+	struct qfq_class *cl = qfq_find_class(sch, classid);
+
+	if (cl != NULL)
+		cl->filter_cnt++;
+
+	return (unsigned long)cl;
+}
+
+static void qfq_unbind_tcf(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	cl->filter_cnt--;
+}
+
+static int qfq_graft_class(struct Qdisc *sch, unsigned long arg,
+			   struct Qdisc *new, struct Qdisc **old)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	if (new == NULL) {
+		new = qdisc_create_dflt(sch->dev_queue,
+					&pfifo_qdisc_ops, cl->common.classid);
+		if (new == NULL)
+			new = &noop_qdisc;
+	}
+
+	sch_tree_lock(sch);
+	qfq_purge_queue(cl);
+	*old = cl->qdisc;
+	cl->qdisc = new;
+	sch_tree_unlock(sch);
+	return 0;
+}
+
+static struct Qdisc *qfq_class_leaf(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	return cl->qdisc;
+}
+
+static int qfq_dump_class(struct Qdisc *sch, unsigned long arg,
+			  struct sk_buff *skb, struct tcmsg *tcm)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+	struct nlattr *nest;
+
+	tcm->tcm_parent	= TC_H_ROOT;
+	tcm->tcm_handle	= cl->common.classid;
+	tcm->tcm_info	= cl->qdisc->handle;
+
+	nest = nla_nest_start(skb, TCA_OPTIONS);
+	if (nest == NULL)
+		goto nla_put_failure;
+	NLA_PUT_U32(skb, TCA_QFQ_WEIGHT, ONE_FP/cl->inv_w);
+	NLA_PUT_U32(skb, TCA_QFQ_LMAX, cl->lmax);
+	return nla_nest_end(skb, nest);
+
+nla_put_failure:
+	nla_nest_cancel(skb, nest);
+	return -EMSGSIZE;
+}
+
+static int qfq_dump_class_stats(struct Qdisc *sch, unsigned long arg,
+				struct gnet_dump *d)
+{
+	struct qfq_class *cl = (struct qfq_class *)arg;
+	struct tc_qfq_stats xstats;
+
+	memset(&xstats, 0, sizeof(xstats));
+	cl->qdisc->qstats.qlen = cl->qdisc->q.qlen;
+
+	xstats.weight = ONE_FP/cl->inv_w;
+	xstats.lmax = cl->lmax;
+
+	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
+	    gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_queue(d, &cl->qdisc->qstats) < 0)
+		return -1;
+
+	return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
+}
+
+static void qfq_walk(struct Qdisc *sch, struct qdisc_walker *arg)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl;
+	struct hlist_node *n;
+	unsigned int i;
+
+	if (arg->stop)
+		return;
+
+	for (i = 0; i < q->clhash.hashsize; i++) {
+		hlist_for_each_entry(cl, n, &q->clhash.hash[i], common.hnode) {
+			if (arg->count < arg->skip) {
+				arg->count++;
+				continue;
+			}
+			if (arg->fn(sch, (unsigned long)cl, arg) < 0) {
+				arg->stop = 1;
+				return;
+			}
+			arg->count++;
+		}
+	}
+}
+
+static struct qfq_class *qfq_classify(struct sk_buff *skb, struct Qdisc *sch,
+				      int *qerr)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl;
+	struct tcf_result res;
+	int result;
+
+	if (TC_H_MAJ(skb->priority ^ sch->handle) == 0) {
+		pr_debug("qfq_classify: found %d\n", skb->priority);
+		cl = qfq_find_class(sch, skb->priority);
+		if (cl != NULL)
+			return cl;
+	}
+
+	*qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
+	result = tc_classify(skb, q->filter_list, &res);
+	if (result >= 0) {
+#ifdef CONFIG_NET_CLS_ACT
+		switch (result) {
+		case TC_ACT_QUEUED:
+		case TC_ACT_STOLEN:
+			*qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
+		case TC_ACT_SHOT:
+			return NULL;
+		}
+#endif
+		cl = (struct qfq_class *)res.class;
+		if (cl == NULL)
+			cl = qfq_find_class(sch, res.classid);
+		return cl;
+	}
+
+	return NULL;
+}
+
+/* Generic comparison function, handling wraparound. */
+static inline int qfq_gt(u64 a, u64 b)
+{
+	return (s64)(a - b) > 0;
+}
+
+/* Round a precise timestamp to its slotted value. */
+static inline u64 qfq_round_down(u64 ts, unsigned int shift)
+{
+	return ts & ~((1ULL << shift) - 1);
+}
+
+/* return the pointer to the group with lowest index in the bitmap */
+static inline struct qfq_group *qfq_ffs(struct qfq_sched *q,
+					unsigned long bitmap)
+{
+	int index = __ffs(bitmap);
+	return &q->groups[index];
+}
+/* Calculate a mask to mimic what would be ffs_from(). */
+static inline unsigned long mask_from(unsigned long bitmap, int from)
+{
+	return bitmap & ~((1UL << from) - 1);
+}
+
+/*
+ * The state computation relies on ER=0, IR=1, EB=2, IB=3
+ * First compute eligibility comparing grp->S, q->V,
+ * then check if someone is blocking us and possibly add EB
+ */
+static int qfq_calc_state(struct qfq_sched *q, const struct qfq_group *grp)
+{
+	/* if S > V we are not eligible */
+	unsigned int state = qfq_gt(grp->S, q->V);
+	unsigned long mask = mask_from(q->bitmaps[ER], grp->index);
+	struct qfq_group *next;
+
+	if (mask) {
+		next = qfq_ffs(q, mask);
+		if (qfq_gt(grp->F, next->F))
+			state |= EB;
+	}
+
+	return state;
+}
+
+
+/*
+ * In principle
+ *	q->bitmaps[dst] |= q->bitmaps[src] & mask;
+ *	q->bitmaps[src] &= ~mask;
+ * but we should make sure that src != dst
+ */
+static inline void qfq_move_groups(struct qfq_sched *q, unsigned long mask,
+				   int src, int dst)
+{
+	q->bitmaps[dst] |= q->bitmaps[src] & mask;
+	q->bitmaps[src] &= ~mask;
+}
+
+static void qfq_unblock_groups(struct qfq_sched *q, int index, u64 old_F)
+{
+	unsigned long mask = mask_from(q->bitmaps[ER], index + 1);
+	struct qfq_group *next;
+
+	if (mask) {
+		next = qfq_ffs(q, mask);
+		if (!qfq_gt(next->F, old_F))
+			return;
+	}
+
+	mask = (1UL << index) - 1;
+	qfq_move_groups(q, mask, EB, ER);
+	qfq_move_groups(q, mask, IB, IR);
+}
+
+/*
+ * perhaps
+ *
+	old_V ^= q->V;
+	old_V >>= QFQ_MIN_SLOT_SHIFT;
+	if (old_V) {
+		...
+	}
+ *
+ */
+static void qfq_make_eligible(struct qfq_sched *q, u64 old_V)
+{
+	unsigned long vslot = q->V >> QFQ_MIN_SLOT_SHIFT;
+	unsigned long old_vslot = old_V >> QFQ_MIN_SLOT_SHIFT;
+
+	if (vslot != old_vslot) {
+		unsigned long mask = (1UL << fls(vslot ^ old_vslot)) - 1;
+		qfq_move_groups(q, mask, IR, ER);
+		qfq_move_groups(q, mask, IB, EB);
+	}
+}
+
+
+/*
+ * XXX we should make sure that slot becomes less than 32.
+ * This is guaranteed by the input values.
+ * roundedS is always cl->S rounded on grp->slot_shift bits.
+ */
+static void qfq_slot_insert(struct qfq_group *grp, struct qfq_class *cl,
+			    u64 roundedS)
+{
+	u64 slot = (roundedS - grp->S) >> grp->slot_shift;
+	unsigned int i = (grp->front + slot) % QFQ_MAX_SLOTS;
+
+	hlist_add_head(&cl->next, &grp->slots[i]);
+	__set_bit(slot, &grp->full_slots);
+}
+
+/* Maybe introduce hlist_first_entry?? */
+static struct qfq_class *qfq_slot_head(struct qfq_group *grp)
+{
+	return hlist_entry(grp->slots[grp->front].first,
+			   struct qfq_class, next);
+}
+
+/*
+ * remove the entry from the slot
+ */
+static void qfq_front_slot_remove(struct qfq_group *grp)
+{
+	struct qfq_class *cl = qfq_slot_head(grp);
+
+	BUG_ON(!cl);
+	hlist_del(&cl->next);
+	if (hlist_empty(&grp->slots[grp->front]))
+		__clear_bit(0, &grp->full_slots);
+}
+
+/*
+ * Returns the first full queue in a group. As a side effect,
+ * adjust the bucket list so the first non-empty bucket is at
+ * position 0 in full_slots.
+ */
+static struct qfq_class *qfq_slot_scan(struct qfq_group *grp)
+{
+	unsigned int i;
+
+	pr_debug("qfq slot_scan: grp %u full %#lx\n",
+		 grp->index, grp->full_slots);
+
+	if (grp->full_slots == 0)
+		return NULL;
+
+	i = __ffs(grp->full_slots);  /* zero based */
+	if (i > 0) {
+		grp->front = (grp->front + i) % QFQ_MAX_SLOTS;
+		grp->full_slots >>= i;
+	}
+
+	return qfq_slot_head(grp);
+}
+
+/*
+ * adjust the bucket list. When the start time of a group decreases,
+ * we move the index down (modulo QFQ_MAX_SLOTS) so we don't need to
+ * move the objects. The mask of occupied slots must be shifted
+ * because we use ffs() to find the first non-empty slot.
+ * This covers decreases in the group's start time, but what about
+ * increases of the start time ?
+ * Here too we should make sure that i is less than 32
+ */
+static void qfq_slot_rotate(struct qfq_group *grp, u64 roundedS)
+{
+	unsigned int i = (grp->S - roundedS) >> grp->slot_shift;
+
+	grp->full_slots <<= i;
+	grp->front = (grp->front - i) % QFQ_MAX_SLOTS;
+}
+
+static void qfq_update_eligible(struct qfq_sched *q, u64 old_V)
+{
+	struct qfq_group *grp;
+	unsigned long ineligible;
+
+	ineligible = q->bitmaps[IR] | q->bitmaps[IB];
+	if (ineligible) {
+		if (!q->bitmaps[ER]) {
+			grp = qfq_ffs(q, ineligible);
+			if (qfq_gt(grp->S, q->V))
+				q->V = grp->S;
+		}
+		qfq_make_eligible(q, old_V);
+	}
+}
+
+/* What is length of next packet in queue (0 if queue is empty) */
+static unsigned int qdisc_peek_len(struct Qdisc *sch)
+{
+	struct sk_buff *skb;
+
+	skb = sch->ops->peek(sch);
+	return skb ? qdisc_pkt_len(skb) : 0;
+}
+
+/*
+ * Updates the class, returns true if also the group needs to be updated.
+ */
+static bool qfq_update_class(struct qfq_group *grp, struct qfq_class *cl)
+{
+	unsigned int len = qdisc_peek_len(cl->qdisc);
+
+	cl->S = cl->F;
+	if (!len)
+		qfq_front_slot_remove(grp);	/* queue is empty */
+	else {
+		u64 roundedS;
+
+		cl->F = cl->S + (u64)len * cl->inv_w;
+		roundedS = qfq_round_down(cl->S, grp->slot_shift);
+		if (roundedS == grp->S)
+			return false;
+
+		qfq_front_slot_remove(grp);
+		qfq_slot_insert(grp, cl, roundedS);
+	}
+
+	return true;
+}
+
+static struct sk_buff *qfq_dequeue(struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	struct qfq_class *cl;
+	struct sk_buff *skb;
+	unsigned int len;
+	u64 old_V;
+
+	if (!q->bitmaps[ER])
+		return NULL;
+
+	grp = qfq_ffs(q, q->bitmaps[ER]);
+
+	cl = qfq_slot_head(grp);
+	skb = qdisc_dequeue_peeked(cl->qdisc);
+	if (!skb) {
+		WARN_ONCE(1, "qfq_dequeue: non-workconserving leaf\n");
+		return NULL;
+	}
+
+	sch->q.qlen--;
+	qdisc_bstats_update(sch, skb);
+
+	old_V = q->V;
+	len = qdisc_pkt_len(skb);
+	q->V += (u64)len * IWSUM;
+	pr_debug("qfq dequeue: len %u F %lld now %lld\n",
+		 len, (unsigned long long) cl->F, (unsigned long long) q->V);
+
+	if (qfq_update_class(grp, cl)) {
+		u64 old_F = grp->F;
+
+		cl = qfq_slot_scan(grp);
+		if (!cl)
+			__clear_bit(grp->index, &q->bitmaps[ER]);
+		else {
+			u64 roundedS = qfq_round_down(cl->S, grp->slot_shift);
+			unsigned int s;
+
+			if (grp->S == roundedS)
+				goto skip_unblock;
+			grp->S = roundedS;
+			grp->F = roundedS + (2ULL << grp->slot_shift);
+			__clear_bit(grp->index, &q->bitmaps[ER]);
+			s = qfq_calc_state(q, grp);
+			__set_bit(grp->index, &q->bitmaps[s]);
+		}
+
+		qfq_unblock_groups(q, grp->index, old_F);
+	}
+
+skip_unblock:
+	qfq_update_eligible(q, old_V);
+
+	return skb;
+}
+
+/*
+ * Assign a reasonable start time for a new flow k in group i.
+ * Admissible values for \hat(F) are multiples of \sigma_i
+ * no greater than V+\sigma_i . Larger values mean that
+ * we had a wraparound so we consider the timestamp to be stale.
+ *
+ * If F is not stale and F >= V then we set S = F.
+ * Otherwise we should assign S = V, but this may violate
+ * the ordering in ER. So, if we have groups in ER, set S to
+ * the F_j of the first group j which would be blocking us.
+ * We are guaranteed not to move S backward because
+ * otherwise our group i would still be blocked.
+ */
+static void qfq_update_start(struct qfq_sched *q, struct qfq_class *cl)
+{
+	unsigned long mask;
+	uint32_t limit, roundedF;
+	int slot_shift = cl->grp->slot_shift;
+
+	roundedF = qfq_round_down(cl->F, slot_shift);
+	limit = qfq_round_down(q->V, slot_shift) + (1UL << slot_shift);
+
+	if (!qfq_gt(cl->F, q->V) || qfq_gt(roundedF, limit)) {
+		/* timestamp was stale */
+		mask = mask_from(q->bitmaps[ER], cl->grp->index);
+		if (mask) {
+			struct qfq_group *next = qfq_ffs(q, mask);
+			if (qfq_gt(roundedF, next->F)) {
+				cl->S = next->F;
+				return;
+			}
+		}
+		cl->S = q->V;
+	} else  /* timestamp is not stale */
+		cl->S = cl->F;
+}
+
+static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	struct qfq_class *cl;
+	int err;
+	u64 roundedS;
+	int s;
+
+	cl = qfq_classify(skb, sch, &err);
+	if (cl == NULL) {
+		if (err & __NET_XMIT_BYPASS)
+			sch->qstats.drops++;
+		kfree_skb(skb);
+		return err;
+	}
+	pr_debug("qfq_enqueue: cl = %x\n", cl->common.classid);
+
+	err = qdisc_enqueue(skb, cl->qdisc);
+	if (unlikely(err != NET_XMIT_SUCCESS)) {
+		pr_debug("qfq_enqueue: enqueue failed %d\n", err);
+		if (net_xmit_drop_count(err)) {
+			cl->qstats.drops++;
+			sch->qstats.drops++;
+		}
+		return err;
+	}
+
+	bstats_update(&cl->bstats, skb);
+	++sch->q.qlen;
+
+	/* If the new skb is not the head of queue, then done here. */
+	if (cl->qdisc->q.qlen != 1)
+		return err;
+
+	/* If reach this point, queue q was idle */
+	grp = cl->grp;
+	qfq_update_start(q, cl);
+
+	/* compute new finish time and rounded start. */
+	cl->F = cl->S + (u64)qdisc_pkt_len(skb) * cl->inv_w;
+	roundedS = qfq_round_down(cl->S, grp->slot_shift);
+
+	/*
+	 * insert cl in the correct bucket.
+	 * If cl->S >= grp->S we don't need to adjust the
+	 * bucket list and simply go to the insertion phase.
+	 * Otherwise grp->S is decreasing, we must make room
+	 * in the bucket list, and also recompute the group state.
+	 * Finally, if there were no flows in this group and nobody
+	 * was in ER make sure to adjust V.
+	 */
+	if (grp->full_slots) {
+		if (!qfq_gt(grp->S, cl->S))
+			goto skip_update;
+
+		/* create a slot for this cl->S */
+		qfq_slot_rotate(grp, roundedS);
+		/* group was surely ineligible, remove */
+		__clear_bit(grp->index, &q->bitmaps[IR]);
+		__clear_bit(grp->index, &q->bitmaps[IB]);
+	} else if (!q->bitmaps[ER] && qfq_gt(roundedS, q->V))
+		q->V = roundedS;
+
+	grp->S = roundedS;
+	grp->F = roundedS + (2ULL << grp->slot_shift);
+	s = qfq_calc_state(q, grp);
+	__set_bit(grp->index, &q->bitmaps[s]);
+
+	pr_debug("qfq enqueue: new state %d %#lx S %lld F %lld V %lld\n",
+		 s, q->bitmaps[s],
+		 (unsigned long long) cl->S,
+		 (unsigned long long) cl->F,
+		 (unsigned long long) q->V);
+
+skip_update:
+	qfq_slot_insert(grp, cl, roundedS);
+
+	return err;
+}
+
+
+static void qfq_slot_remove(struct qfq_sched *q, struct qfq_group *grp,
+			    struct qfq_class *cl)
+{
+	unsigned int i, offset;
+	u64 roundedS;
+
+	roundedS = qfq_round_down(cl->S, grp->slot_shift);
+	offset = (roundedS - grp->S) >> grp->slot_shift;
+	i = (grp->front + offset) % QFQ_MAX_SLOTS;
+
+	hlist_del(&cl->next);
+	if (hlist_empty(&grp->slots[i]))
+		__clear_bit(offset, &grp->full_slots);
+}
+
+/*
+ * called to forcibly destroy a queue.
+ * If the queue is not in the front bucket, or if it has
+ * other queues in the front bucket, we can simply remove
+ * the queue with no other side effects.
+ * Otherwise we must propagate the event up.
+ */
+static void qfq_deactivate_class(struct qfq_sched *q, struct qfq_class *cl)
+{
+	struct qfq_group *grp = cl->grp;
+	unsigned long mask;
+	u64 roundedS;
+	int s;
+
+	cl->F = cl->S;
+	qfq_slot_remove(q, grp, cl);
+
+	if (!grp->full_slots) {
+		__clear_bit(grp->index, &q->bitmaps[IR]);
+		__clear_bit(grp->index, &q->bitmaps[EB]);
+		__clear_bit(grp->index, &q->bitmaps[IB]);
+
+		if (test_bit(grp->index, &q->bitmaps[ER]) &&
+		    !(q->bitmaps[ER] & ~((1UL << grp->index) - 1))) {
+			mask = q->bitmaps[ER] & ((1UL << grp->index) - 1);
+			if (mask)
+				mask = ~((1UL << __fls(mask)) - 1);
+			else
+				mask = ~0UL;
+			qfq_move_groups(q, mask, EB, ER);
+			qfq_move_groups(q, mask, IB, IR);
+		}
+		__clear_bit(grp->index, &q->bitmaps[ER]);
+	} else if (hlist_empty(&grp->slots[grp->front])) {
+		cl = qfq_slot_scan(grp);
+		roundedS = qfq_round_down(cl->S, grp->slot_shift);
+		if (grp->S != roundedS) {
+			__clear_bit(grp->index, &q->bitmaps[ER]);
+			__clear_bit(grp->index, &q->bitmaps[IR]);
+			__clear_bit(grp->index, &q->bitmaps[EB]);
+			__clear_bit(grp->index, &q->bitmaps[IB]);
+			grp->S = roundedS;
+			grp->F = roundedS + (2ULL << grp->slot_shift);
+			s = qfq_calc_state(q, grp);
+			__set_bit(grp->index, &q->bitmaps[s]);
+		}
+	}
+
+	qfq_update_eligible(q, q->V);
+}
+
+static void qfq_qlen_notify(struct Qdisc *sch, unsigned long arg)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl = (struct qfq_class *)arg;
+
+	if (cl->qdisc->q.qlen == 0)
+		qfq_deactivate_class(q, cl);
+}
+
+static unsigned int qfq_drop(struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	unsigned int i, j, len;
+
+	for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+		grp = &q->groups[i];
+		for (j = 0; j < QFQ_MAX_SLOTS; j++) {
+			struct qfq_class *cl;
+			struct hlist_node *n;
+
+			hlist_for_each_entry(cl, n, &grp->slots[j], next) {
+
+				if (!cl->qdisc->ops->drop)
+					continue;
+
+				len = cl->qdisc->ops->drop(cl->qdisc);
+				if (len > 0) {
+					sch->q.qlen--;
+					if (!cl->qdisc->q.qlen)
+						qfq_deactivate_class(q, cl);
+
+					return len;
+				}
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int qfq_init_qdisc(struct Qdisc *sch, struct nlattr *opt)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	int i, j, err;
+
+	err = qdisc_class_hash_init(&q->clhash);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+		grp = &q->groups[i];
+		grp->index = i;
+		grp->slot_shift = QFQ_MTU_SHIFT + FRAC_BITS
+				   - (QFQ_MAX_INDEX - i);
+		for (j = 0; j < QFQ_MAX_SLOTS; j++)
+			INIT_HLIST_HEAD(&grp->slots[j]);
+	}
+
+	return 0;
+}
+
+static void qfq_reset_qdisc(struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_group *grp;
+	struct qfq_class *cl;
+	struct hlist_node *n, *tmp;
+	unsigned int i, j;
+
+	for (i = 0; i <= QFQ_MAX_INDEX; i++) {
+		grp = &q->groups[i];
+		for (j = 0; j < QFQ_MAX_SLOTS; j++) {
+			hlist_for_each_entry_safe(cl, n, tmp,
+						  &grp->slots[j], next) {
+				qfq_deactivate_class(q, cl);
+			}
+		}
+	}
+
+	for (i = 0; i < q->clhash.hashsize; i++) {
+		hlist_for_each_entry(cl, n, &q->clhash.hash[i], common.hnode)
+			qdisc_reset(cl->qdisc);
+	}
+	sch->q.qlen = 0;
+}
+
+static void qfq_destroy_qdisc(struct Qdisc *sch)
+{
+	struct qfq_sched *q = qdisc_priv(sch);
+	struct qfq_class *cl;
+	struct hlist_node *n, *next;
+	unsigned int i;
+
+	tcf_destroy_chain(&q->filter_list);
+
+	for (i = 0; i < q->clhash.hashsize; i++) {
+		hlist_for_each_entry_safe(cl, n, next, &q->clhash.hash[i],
+					  common.hnode) {
+			qfq_destroy_class(sch, cl);
+		}
+	}
+	qdisc_class_hash_destroy(&q->clhash);
+}
+
+static const struct Qdisc_class_ops qfq_class_ops = {
+	.change		= qfq_change_class,
+	.delete		= qfq_delete_class,
+	.get		= qfq_get_class,
+	.put		= qfq_put_class,
+	.tcf_chain	= qfq_tcf_chain,
+	.bind_tcf	= qfq_bind_tcf,
+	.unbind_tcf	= qfq_unbind_tcf,
+	.graft		= qfq_graft_class,
+	.leaf		= qfq_class_leaf,
+	.qlen_notify	= qfq_qlen_notify,
+	.dump		= qfq_dump_class,
+	.dump_stats	= qfq_dump_class_stats,
+	.walk		= qfq_walk,
+};
+
+static struct Qdisc_ops qfq_qdisc_ops __read_mostly = {
+	.cl_ops		= &qfq_class_ops,
+	.id		= "qfq",
+	.priv_size	= sizeof(struct qfq_sched),
+	.enqueue	= qfq_enqueue,
+	.dequeue	= qfq_dequeue,
+	.peek		= qdisc_peek_dequeued,
+	.drop		= qfq_drop,
+	.init		= qfq_init_qdisc,
+	.reset		= qfq_reset_qdisc,
+	.destroy	= qfq_destroy_qdisc,
+	.owner		= THIS_MODULE,
+};
+
+static int __init qfq_init(void)
+{
+	return register_qdisc(&qfq_qdisc_ops);
+}
+
+static void __exit qfq_exit(void)
+{
+	unregister_qdisc(&qfq_qdisc_ops);
+}
+
+module_init(qfq_init);
+module_exit(qfq_exit);
+MODULE_LICENSE("GPL");
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index c2e628dfaac..7ef87f9eb67 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -169,7 +169,7 @@ static unsigned int sfq_hash(struct sfq_sched_data *q, struct sk_buff *skb)
 	}
 	case htons(ETH_P_IPV6):
 	{
-		struct ipv6hdr *iph;
+		const struct ipv6hdr *iph;
 		int poff;
 
 		if (!pskb_network_may_pull(skb, sizeof(*iph)))
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 6b04287913c..1a21c571aa0 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -569,6 +569,8 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
 		sctp_assoc_set_primary(asoc, transport);
 	if (asoc->peer.active_path == peer)
 		asoc->peer.active_path = transport;
+	if (asoc->peer.retran_path == peer)
+		asoc->peer.retran_path = transport;
 	if (asoc->peer.last_data_from == peer)
 		asoc->peer.last_data_from = transport;
 
@@ -1323,6 +1325,8 @@ void sctp_assoc_update_retran_path(struct sctp_association *asoc)
 
 	if (t)
 		asoc->peer.retran_path = t;
+	else
+		t = asoc->peer.retran_path;
 
 	SCTP_DEBUG_PRINTK_IPADDR("sctp_assoc_update_retran_path:association"
 				 " %p addr: ",
@@ -1593,7 +1597,7 @@ void sctp_assoc_clean_asconf_ack_cache(const struct sctp_association *asoc)
 	struct sctp_chunk *ack;
 	struct sctp_chunk *tmp;
 
-	/* We can remove all the entries from the queue upto
+	/* We can remove all the entries from the queue up to
 	 * the "Peer-Sequence-Number".
 	 */
 	list_for_each_entry_safe(ack, tmp, &asoc->asconf_ack_list,
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index ddbbf7c81fa..865e68fef21 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -113,7 +113,7 @@ struct sctp_shared_key *sctp_auth_shkey_create(__u16 key_id, gfp_t gfp)
 	return new;
 }
 
-/* Free the shared key stucture */
+/* Free the shared key structure */
 static void sctp_auth_shkey_free(struct sctp_shared_key *sh_key)
 {
 	BUG_ON(!list_empty(&sh_key->key_list));
@@ -122,7 +122,7 @@ static void sctp_auth_shkey_free(struct sctp_shared_key *sh_key)
 	kfree(sh_key);
 }
 
-/* Destory the entire key list.  This is done during the
+/* Destroy the entire key list.  This is done during the
  * associon and endpoint free process.
  */
 void sctp_auth_destroy_keys(struct list_head *keys)
@@ -324,7 +324,7 @@ static struct sctp_auth_bytes *sctp_auth_asoc_create_secret(
 	if (!peer_key_vector || !local_key_vector)
 		goto out;
 
-	/* Figure out the order in wich the key_vectors will be
+	/* Figure out the order in which the key_vectors will be
 	 * added to the endpoint shared key.
 	 * SCTP-AUTH, Section 6.1:
 	 *   This is performed by selecting the numerically smaller key
diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c
index faf71d179e4..6338413376c 100644
--- a/net/sctp/bind_addr.c
+++ b/net/sctp/bind_addr.c
@@ -140,14 +140,12 @@ void sctp_bind_addr_init(struct sctp_bind_addr *bp, __u16 port)
 /* Dispose of the address list. */
 static void sctp_bind_addr_clean(struct sctp_bind_addr *bp)
 {
-	struct sctp_sockaddr_entry *addr;
-	struct list_head *pos, *temp;
+	struct sctp_sockaddr_entry *addr, *temp;
 
 	/* Empty the bind address list. */
-	list_for_each_safe(pos, temp, &bp->address_list) {
-		addr = list_entry(pos, struct sctp_sockaddr_entry, list);
-		list_del(pos);
-		kfree(addr);
+	list_for_each_entry_safe(addr, temp, &bp->address_list, list) {
+		list_del_rcu(&addr->list);
+		call_rcu(&addr->rcu, sctp_local_addr_free);
 		SCTP_DBG_OBJCNT_DEC(addr);
 	}
 }
@@ -219,7 +217,7 @@ int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr)
 	}
 
 	if (found) {
-		call_rcu(&addr->rcu, sctp_local_addr_free);
+		kfree_rcu(addr, rcu);
 		SCTP_DBG_OBJCNT_DEC(addr);
 		return 0;
 	}
diff --git a/net/sctp/debug.c b/net/sctp/debug.c
index bf24fa697de..ec997cfe0a7 100644
--- a/net/sctp/debug.c
+++ b/net/sctp/debug.c
@@ -98,7 +98,6 @@ const char *sctp_cname(const sctp_subtype_t cid)
 
 /* These are printable forms of the states.  */
 const char *const sctp_state_tbl[SCTP_STATE_NUM_STATES] = {
-	"STATE_EMPTY",
 	"STATE_CLOSED",
 	"STATE_COOKIE_WAIT",
 	"STATE_COOKIE_ECHOED",
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index e10acc01c75..c8cc24e282c 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -325,6 +325,7 @@ static struct sctp_association *__sctp_endpoint_lookup_assoc(
 	struct sctp_transport **transport)
 {
 	struct sctp_association *asoc = NULL;
+	struct sctp_association *tmp;
 	struct sctp_transport *t = NULL;
 	struct sctp_hashbucket *head;
 	struct sctp_ep_common *epb;
@@ -333,25 +334,32 @@ static struct sctp_association *__sctp_endpoint_lookup_assoc(
 	int rport;
 
 	*transport = NULL;
+
+	/* If the local port is not set, there can't be any associations
+	 * on this endpoint.
+	 */
+	if (!ep->base.bind_addr.port)
+		goto out;
+
 	rport = ntohs(paddr->v4.sin_port);
 
 	hash = sctp_assoc_hashfn(ep->base.bind_addr.port, rport);
 	head = &sctp_assoc_hashtable[hash];
 	read_lock(&head->lock);
 	sctp_for_each_hentry(epb, node, &head->chain) {
-		asoc = sctp_assoc(epb);
-		if (asoc->ep != ep || rport != asoc->peer.port)
-			goto next;
+		tmp = sctp_assoc(epb);
+		if (tmp->ep != ep || rport != tmp->peer.port)
+			continue;
 
-		t = sctp_assoc_lookup_paddr(asoc, paddr);
+		t = sctp_assoc_lookup_paddr(tmp, paddr);
 		if (t) {
+			asoc = tmp;
 			*transport = t;
 			break;
 		}
-next:
-		asoc = NULL;
 	}
 	read_unlock(&head->lock);
+out:
 	return asoc;
 }
 
diff --git a/net/sctp/input.c b/net/sctp/input.c
index 826661be73e..741ed164883 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -565,7 +565,7 @@ void sctp_err_finish(struct sock *sk, struct sctp_association *asoc)
  */
 void sctp_v4_err(struct sk_buff *skb, __u32 info)
 {
-	struct iphdr *iph = (struct iphdr *)skb->data;
+	const struct iphdr *iph = (const struct iphdr *)skb->data;
 	const int ihlen = iph->ihl * 4;
 	const int type = icmp_hdr(skb)->type;
 	const int code = icmp_hdr(skb)->code;
@@ -661,7 +661,6 @@ static int sctp_rcv_ootb(struct sk_buff *skb)
 {
 	sctp_chunkhdr_t *ch;
 	__u8 *ch_end;
-	sctp_errhdr_t *err;
 
 	ch = (sctp_chunkhdr_t *) skb->data;
 
@@ -697,20 +696,6 @@ static int sctp_rcv_ootb(struct sk_buff *skb)
 		if (SCTP_CID_INIT == ch->type && (void *)ch != skb->data)
 			goto discard;
 
-		/* RFC 8.4, 7) If the packet contains a "Stale cookie" ERROR
-		 * or a COOKIE ACK the SCTP Packet should be silently
-		 * discarded.
-		 */
-		if (SCTP_CID_COOKIE_ACK == ch->type)
-			goto discard;
-
-		if (SCTP_CID_ERROR == ch->type) {
-			sctp_walk_errors(err, ch) {
-				if (SCTP_ERROR_STALE_COOKIE == err->cause)
-					goto discard;
-			}
-		}
-
 		ch = (sctp_chunkhdr_t *) ch_end;
 	} while (ch_end < skb_tail_pointer(skb));
 
@@ -1017,7 +1002,7 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
 	/* Skip over the ADDIP header and find the Address parameter */
 	param = (union sctp_addr_param *)(asconf + 1);
 
-	af = sctp_get_af_specific(param_type2af(param->v4.param_hdr.type));
+	af = sctp_get_af_specific(param_type2af(param->p.type));
 	if (unlikely(!af))
 		return NULL;
 
@@ -1034,7 +1019,7 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
 *    association.
 *
 * This means that any chunks that can help us identify the association need
-* to be looked at to find this assocation.
+* to be looked at to find this association.
 */
 static struct sctp_association *__sctp_rcv_walk_lookup(struct sk_buff *skb,
 				      const union sctp_addr *laddr,
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 865ce7ba4e1..0bb0d7cb9f1 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -80,6 +80,13 @@
 
 #include <asm/uaccess.h>
 
+static inline int sctp_v6_addr_match_len(union sctp_addr *s1,
+					 union sctp_addr *s2);
+static void sctp_v6_to_addr(union sctp_addr *addr, struct in6_addr *saddr,
+			      __be16 port);
+static int sctp_v6_cmp_addr(const union sctp_addr *addr1,
+			    const union sctp_addr *addr2);
+
 /* Event handler for inet6 address addition/deletion events.
  * The sctp_local_addr_list needs to be protocted by a spin lock since
  * multiple notifiers (say IPv4 and IPv6) may be running at the same
@@ -123,7 +130,7 @@ static int sctp_inet6addr_event(struct notifier_block *this, unsigned long ev,
 		}
 		spin_unlock_bh(&sctp_local_addr_lock);
 		if (found)
-			call_rcu(&addr->rcu, sctp_local_addr_free);
+			kfree_rcu(addr, rcu);
 		break;
 	}
 
@@ -240,37 +247,107 @@ static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport)
 /* Returns the dst cache entry for the given source and destination ip
  * addresses.
  */
-static struct dst_entry *sctp_v6_get_dst(struct sctp_association *asoc,
-					 union sctp_addr *daddr,
-					 union sctp_addr *saddr)
+static void sctp_v6_get_dst(struct sctp_transport *t, union sctp_addr *saddr,
+			    struct flowi *fl, struct sock *sk)
 {
-	struct dst_entry *dst;
-	struct flowi6 fl6;
+	struct sctp_association *asoc = t->asoc;
+	struct dst_entry *dst = NULL;
+	struct flowi6 *fl6 = &fl->u.ip6;
+	struct sctp_bind_addr *bp;
+	struct sctp_sockaddr_entry *laddr;
+	union sctp_addr *baddr = NULL;
+	union sctp_addr *daddr = &t->ipaddr;
+	union sctp_addr dst_saddr;
+	__u8 matchlen = 0;
+	__u8 bmatchlen;
+	sctp_scope_t scope;
 
-	memset(&fl6, 0, sizeof(fl6));
-	ipv6_addr_copy(&fl6.daddr, &daddr->v6.sin6_addr);
+	memset(fl6, 0, sizeof(struct flowi6));
+	ipv6_addr_copy(&fl6->daddr, &daddr->v6.sin6_addr);
+	fl6->fl6_dport = daddr->v6.sin6_port;
+	fl6->flowi6_proto = IPPROTO_SCTP;
 	if (ipv6_addr_type(&daddr->v6.sin6_addr) & IPV6_ADDR_LINKLOCAL)
-		fl6.flowi6_oif = daddr->v6.sin6_scope_id;
+		fl6->flowi6_oif = daddr->v6.sin6_scope_id;
 
+	SCTP_DEBUG_PRINTK("%s: DST=%pI6 ", __func__, &fl6->daddr);
 
-	SCTP_DEBUG_PRINTK("%s: DST=%pI6 ", __func__, &fl6.daddr);
+	if (asoc)
+		fl6->fl6_sport = htons(asoc->base.bind_addr.port);
 
 	if (saddr) {
-		ipv6_addr_copy(&fl6.saddr, &saddr->v6.sin6_addr);
-		SCTP_DEBUG_PRINTK("SRC=%pI6 - ", &fl6.saddr);
+		ipv6_addr_copy(&fl6->saddr, &saddr->v6.sin6_addr);
+		fl6->fl6_sport = saddr->v6.sin6_port;
+		SCTP_DEBUG_PRINTK("SRC=%pI6 - ", &fl6->saddr);
+	}
+
+	dst = ip6_dst_lookup_flow(sk, fl6, NULL, false);
+	if (!asoc || saddr)
+		goto out;
+
+	bp = &asoc->base.bind_addr;
+	scope = sctp_scope(daddr);
+	/* ip6_dst_lookup has filled in the fl6->saddr for us.  Check
+	 * to see if we can use it.
+	 */
+	if (!IS_ERR(dst)) {
+		/* Walk through the bind address list and look for a bind
+		 * address that matches the source address of the returned dst.
+		 */
+		sctp_v6_to_addr(&dst_saddr, &fl6->saddr, htons(bp->port));
+		rcu_read_lock();
+		list_for_each_entry_rcu(laddr, &bp->address_list, list) {
+			if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
+				continue;
+
+			/* Do not compare against v4 addrs */
+			if ((laddr->a.sa.sa_family == AF_INET6) &&
+			    (sctp_v6_cmp_addr(&dst_saddr, &laddr->a))) {
+				rcu_read_unlock();
+				goto out;
+			}
+		}
+		rcu_read_unlock();
+		/* None of the bound addresses match the source address of the
+		 * dst. So release it.
+		 */
+		dst_release(dst);
+		dst = NULL;
 	}
 
-	dst = ip6_route_output(&init_net, NULL, &fl6);
-	if (!dst->error) {
+	/* Walk through the bind address list and try to get the
+	 * best source address for a given destination.
+	 */
+	rcu_read_lock();
+	list_for_each_entry_rcu(laddr, &bp->address_list, list) {
+		if (!laddr->valid && laddr->state != SCTP_ADDR_SRC)
+			continue;
+		if ((laddr->a.sa.sa_family == AF_INET6) &&
+		    (scope <= sctp_scope(&laddr->a))) {
+			bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
+			if (!baddr || (matchlen < bmatchlen)) {
+				baddr = &laddr->a;
+				matchlen = bmatchlen;
+			}
+		}
+	}
+	rcu_read_unlock();
+	if (baddr) {
+		ipv6_addr_copy(&fl6->saddr, &baddr->v6.sin6_addr);
+		fl6->fl6_sport = baddr->v6.sin6_port;
+		dst = ip6_dst_lookup_flow(sk, fl6, NULL, false);
+	}
+
+out:
+	if (!IS_ERR(dst)) {
 		struct rt6_info *rt;
 		rt = (struct rt6_info *)dst;
+		t->dst = dst;
 		SCTP_DEBUG_PRINTK("rt6_dst:%pI6 rt6_src:%pI6\n",
-			&rt->rt6i_dst.addr, &rt->rt6i_src.addr);
-		return dst;
+			&rt->rt6i_dst.addr, &fl6->saddr);
+	} else {
+		t->dst = NULL;
+		SCTP_DEBUG_PRINTK("NO ROUTE\n");
 	}
-	SCTP_DEBUG_PRINTK("NO ROUTE\n");
-	dst_release(dst);
-	return NULL;
 }
 
 /* Returns the number of consecutive initial bits that match in the 2 ipv6
@@ -286,64 +363,18 @@ static inline int sctp_v6_addr_match_len(union sctp_addr *s1,
  * and asoc's bind address list.
  */
 static void sctp_v6_get_saddr(struct sctp_sock *sk,
-			      struct sctp_association *asoc,
-			      struct dst_entry *dst,
-			      union sctp_addr *daddr,
-			      union sctp_addr *saddr)
+			      struct sctp_transport *t,
+			      struct flowi *fl)
 {
-	struct sctp_bind_addr *bp;
-	struct sctp_sockaddr_entry *laddr;
-	sctp_scope_t scope;
-	union sctp_addr *baddr = NULL;
-	__u8 matchlen = 0;
-	__u8 bmatchlen;
+	struct flowi6 *fl6 = &fl->u.ip6;
+	union sctp_addr *saddr = &t->saddr;
 
-	SCTP_DEBUG_PRINTK("%s: asoc:%p dst:%p daddr:%pI6 ",
-			  __func__, asoc, dst, &daddr->v6.sin6_addr);
-
-	if (!asoc) {
-		ipv6_dev_get_saddr(sock_net(sctp_opt2sk(sk)),
-				   dst ? ip6_dst_idev(dst)->dev : NULL,
-				   &daddr->v6.sin6_addr,
-				   inet6_sk(&sk->inet.sk)->srcprefs,
-				   &saddr->v6.sin6_addr);
-		SCTP_DEBUG_PRINTK("saddr from ipv6_get_saddr: %pI6\n",
-				  &saddr->v6.sin6_addr);
-		return;
-	}
-
-	scope = sctp_scope(daddr);
-
-	bp = &asoc->base.bind_addr;
+	SCTP_DEBUG_PRINTK("%s: asoc:%p dst:%p\n", __func__, t->asoc, t->dst);
 
-	/* Go through the bind address list and find the best source address
-	 * that matches the scope of the destination address.
-	 */
-	rcu_read_lock();
-	list_for_each_entry_rcu(laddr, &bp->address_list, list) {
-		if (!laddr->valid)
-			continue;
-		if ((laddr->state == SCTP_ADDR_SRC) &&
-		    (laddr->a.sa.sa_family == AF_INET6) &&
-		    (scope <= sctp_scope(&laddr->a))) {
-			bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
-			if (!baddr || (matchlen < bmatchlen)) {
-				baddr = &laddr->a;
-				matchlen = bmatchlen;
-			}
-		}
-	}
-
-	if (baddr) {
-		memcpy(saddr, baddr, sizeof(union sctp_addr));
-		SCTP_DEBUG_PRINTK("saddr: %pI6\n", &saddr->v6.sin6_addr);
-	} else {
-		pr_err("%s: asoc:%p Could not find a valid source "
-		       "address for the dest:%pI6\n",
-		       __func__, asoc, &daddr->v6.sin6_addr);
+	if (t->dst) {
+		saddr->v6.sin6_family = AF_INET6;
+		ipv6_addr_copy(&saddr->v6.sin6_addr, &fl6->saddr);
 	}
-
-	rcu_read_unlock();
 }
 
 /* Make a copy of all potential local addresses. */
@@ -465,14 +496,13 @@ static int sctp_v6_to_addr_param(const union sctp_addr *addr,
 	return length;
 }
 
-/* Initialize a sctp_addr from a dst_entry. */
-static void sctp_v6_dst_saddr(union sctp_addr *addr, struct dst_entry *dst,
+/* Initialize a sctp_addr from struct in6_addr. */
+static void sctp_v6_to_addr(union sctp_addr *addr, struct in6_addr *saddr,
 			      __be16 port)
 {
-	struct rt6_info *rt = (struct rt6_info *)dst;
 	addr->sa.sa_family = AF_INET6;
 	addr->v6.sin6_port = port;
-	ipv6_addr_copy(&addr->v6.sin6_addr, &rt->rt6i_src.addr);
+	ipv6_addr_copy(&addr->v6.sin6_addr, saddr);
 }
 
 /* Compare addresses exactly.
@@ -531,7 +561,7 @@ static int sctp_v6_is_any(const union sctp_addr *addr)
 static int sctp_v6_available(union sctp_addr *addr, struct sctp_sock *sp)
 {
 	int type;
-	struct in6_addr *in6 = (struct in6_addr *)&addr->v6.sin6_addr;
+	const struct in6_addr *in6 = (const struct in6_addr *)&addr->v6.sin6_addr;
 
 	type = ipv6_addr_type(in6);
 	if (IPV6_ADDR_ANY == type)
@@ -959,7 +989,6 @@ static struct sctp_af sctp_af_inet6 = {
 	.to_sk_daddr	   = sctp_v6_to_sk_daddr,
 	.from_addr_param   = sctp_v6_from_addr_param,
 	.to_addr_param	   = sctp_v6_to_addr_param,
-	.dst_saddr	   = sctp_v6_dst_saddr,
 	.cmp_addr	   = sctp_v6_cmp_addr,
 	.scope		   = sctp_v6_scope,
 	.addr_valid	   = sctp_v6_addr_valid,
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 60600d337a3..b4f3cf06d8d 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -510,7 +510,7 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 		sh->checksum = sctp_end_cksum(crc32);
 	} else {
 		if (dst->dev->features & NETIF_F_SCTP_CSUM) {
-			/* no need to seed psuedo checksum for SCTP */
+			/* no need to seed pseudo checksum for SCTP */
 			nskb->ip_summed = CHECKSUM_PARTIAL;
 			nskb->csum_start = (skb_transport_header(nskb) -
 			                    nskb->head);
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 26dc005113a..1c88c8911dc 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -131,7 +131,8 @@ static inline int sctp_cacc_skip_3_1_d(struct sctp_transport *primary,
 static inline int sctp_cacc_skip_3_1_f(struct sctp_transport *transport,
 				       int count_of_newacks)
 {
-	if (count_of_newacks < 2 && !transport->cacc.cacc_saw_newack)
+	if (count_of_newacks < 2 &&
+			(transport && !transport->cacc.cacc_saw_newack))
 		return 1;
 	return 0;
 }
@@ -177,13 +178,13 @@ static inline int sctp_cacc_skip_3_2(struct sctp_transport *primary, __u32 tsn)
  * 3) If the missing report count for TSN t is to be
  * incremented according to [RFC2960] and
  * [SCTP_STEWART-2002], and CHANGEOVER_ACTIVE is set,
- * then the sender MUST futher execute steps 3.1 and
+ * then the sender MUST further execute steps 3.1 and
  * 3.2 to determine if the missing report count for
  * TSN t SHOULD NOT be incremented.
  *
  * 3.3) If 3.1 and 3.2 do not dictate that the missing
  * report count for t should not be incremented, then
- * the sender SOULD increment missing report count for
+ * the sender SHOULD increment missing report count for
  * t (according to [RFC2960] and [SCTP_STEWART_2002]).
  */
 static inline int sctp_cacc_skip(struct sctp_transport *primary,
@@ -319,7 +320,6 @@ int sctp_outq_tail(struct sctp_outq *q, struct sctp_chunk *chunk)
 		 * chunk.
 		 */
 		switch (q->asoc->state) {
-		case SCTP_STATE_EMPTY:
 		case SCTP_STATE_CLOSED:
 		case SCTP_STATE_SHUTDOWN_PENDING:
 		case SCTP_STATE_SHUTDOWN_SENT:
@@ -577,6 +577,13 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt,
 	 * try to send as much as possible.
 	 */
 	list_for_each_entry_safe(chunk, chunk1, lqueue, transmitted_list) {
+		/* If the chunk is abandoned, move it to abandoned list. */
+		if (sctp_chunk_abandoned(chunk)) {
+			list_del_init(&chunk->transmitted_list);
+			sctp_insert_list(&q->abandoned,
+					 &chunk->transmitted_list);
+			continue;
+		}
 
 		/* Make sure that Gap Acked TSNs are not retransmitted.  A
 		 * simple approach is just to move such TSNs out of the
@@ -618,9 +625,12 @@ redo:
 
 			/* If we are retransmitting, we should only
 			 * send a single packet.
+			 * Otherwise, try appending this chunk again.
 			 */
 			if (rtx_timeout || fast_rtx)
 				done = 1;
+			else
+				goto redo;
 
 			/* Bundle next chunk in the next round.  */
 			break;
@@ -843,7 +853,7 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout)
 		case SCTP_CID_ECN_CWR:
 		case SCTP_CID_ASCONF_ACK:
 			one_packet = 1;
-			/* Fall throught */
+			/* Fall through */
 
 		case SCTP_CID_SACK:
 		case SCTP_CID_HEARTBEAT:
@@ -1683,8 +1693,9 @@ static void sctp_mark_missing(struct sctp_outq *q,
 			/* SFR-CACC may require us to skip marking
 			 * this chunk as missing.
 			 */
-			if (!transport || !sctp_cacc_skip(primary, transport,
-					    count_of_newacks, tsn)) {
+			if (!transport || !sctp_cacc_skip(primary,
+						chunk->transport,
+						count_of_newacks, tsn)) {
 				chunk->tsn_missing_report++;
 
 				SCTP_DEBUG_PRINTK(
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index d5bf91d04f6..67380a29e2e 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -230,13 +230,6 @@ static void sctp_free_local_addr_list(void)
 	}
 }
 
-void sctp_local_addr_free(struct rcu_head *head)
-{
-	struct sctp_sockaddr_entry *e = container_of(head,
-				struct sctp_sockaddr_entry, rcu);
-	kfree(e);
-}
-
 /* Copy the local addresses which are valid for 'scope' into 'bp'.  */
 int sctp_copy_local_addr_list(struct sctp_bind_addr *bp, sctp_scope_t scope,
 			      gfp_t gfp, int copy_flags)
@@ -339,13 +332,12 @@ static int sctp_v4_to_addr_param(const union sctp_addr *addr,
 }
 
 /* Initialize a sctp_addr from a dst_entry. */
-static void sctp_v4_dst_saddr(union sctp_addr *saddr, struct dst_entry *dst,
+static void sctp_v4_dst_saddr(union sctp_addr *saddr, struct flowi4 *fl4,
 			      __be16 port)
 {
-	struct rtable *rt = (struct rtable *)dst;
 	saddr->v4.sin_family = AF_INET;
 	saddr->v4.sin_port = port;
-	saddr->v4.sin_addr.s_addr = rt->rt_src;
+	saddr->v4.sin_addr.s_addr = fl4->saddr;
 }
 
 /* Compare two addresses exactly. */
@@ -463,35 +455,36 @@ static sctp_scope_t sctp_v4_scope(union sctp_addr *addr)
  * addresses. If an association is passed, trys to get a dst entry with a
  * source address that matches an address in the bind address list.
  */
-static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc,
-					 union sctp_addr *daddr,
-					 union sctp_addr *saddr)
+static void sctp_v4_get_dst(struct sctp_transport *t, union sctp_addr *saddr,
+				struct flowi *fl, struct sock *sk)
 {
+	struct sctp_association *asoc = t->asoc;
 	struct rtable *rt;
-	struct flowi4 fl4;
+	struct flowi4 *fl4 = &fl->u.ip4;
 	struct sctp_bind_addr *bp;
 	struct sctp_sockaddr_entry *laddr;
 	struct dst_entry *dst = NULL;
+	union sctp_addr *daddr = &t->ipaddr;
 	union sctp_addr dst_saddr;
 
-	memset(&fl4, 0x0, sizeof(struct flowi4));
-	fl4.daddr  = daddr->v4.sin_addr.s_addr;
-	fl4.fl4_dport = daddr->v4.sin_port;
-	fl4.flowi4_proto = IPPROTO_SCTP;
+	memset(fl4, 0x0, sizeof(struct flowi4));
+	fl4->daddr  = daddr->v4.sin_addr.s_addr;
+	fl4->fl4_dport = daddr->v4.sin_port;
+	fl4->flowi4_proto = IPPROTO_SCTP;
 	if (asoc) {
-		fl4.flowi4_tos = RT_CONN_FLAGS(asoc->base.sk);
-		fl4.flowi4_oif = asoc->base.sk->sk_bound_dev_if;
-		fl4.fl4_sport = htons(asoc->base.bind_addr.port);
+		fl4->flowi4_tos = RT_CONN_FLAGS(asoc->base.sk);
+		fl4->flowi4_oif = asoc->base.sk->sk_bound_dev_if;
+		fl4->fl4_sport = htons(asoc->base.bind_addr.port);
 	}
 	if (saddr) {
-		fl4.saddr = saddr->v4.sin_addr.s_addr;
-		fl4.fl4_sport = saddr->v4.sin_port;
+		fl4->saddr = saddr->v4.sin_addr.s_addr;
+		fl4->fl4_sport = saddr->v4.sin_port;
 	}
 
 	SCTP_DEBUG_PRINTK("%s: DST:%pI4, SRC:%pI4 - ",
-			  __func__, &fl4.daddr, &fl4.saddr);
+			  __func__, &fl4->daddr, &fl4->saddr);
 
-	rt = ip_route_output_key(&init_net, &fl4);
+	rt = ip_route_output_key(&init_net, fl4);
 	if (!IS_ERR(rt))
 		dst = &rt->dst;
 
@@ -507,7 +500,7 @@ static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc,
 		/* Walk through the bind address list and look for a bind
 		 * address that matches the source address of the returned dst.
 		 */
-		sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
+		sctp_v4_dst_saddr(&dst_saddr, fl4, htons(bp->port));
 		rcu_read_lock();
 		list_for_each_entry_rcu(laddr, &bp->address_list, list) {
 			if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
@@ -533,9 +526,9 @@ static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc,
 			continue;
 		if ((laddr->state == SCTP_ADDR_SRC) &&
 		    (AF_INET == laddr->a.sa.sa_family)) {
-			fl4.saddr = laddr->a.v4.sin_addr.s_addr;
-			fl4.fl4_sport = laddr->a.v4.sin_port;
-			rt = ip_route_output_key(&init_net, &fl4);
+			fl4->saddr = laddr->a.v4.sin_addr.s_addr;
+			fl4->fl4_sport = laddr->a.v4.sin_port;
+			rt = ip_route_output_key(&init_net, fl4);
 			if (!IS_ERR(rt)) {
 				dst = &rt->dst;
 				goto out_unlock;
@@ -546,33 +539,27 @@ static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc,
 out_unlock:
 	rcu_read_unlock();
 out:
+	t->dst = dst;
 	if (dst)
 		SCTP_DEBUG_PRINTK("rt_dst:%pI4, rt_src:%pI4\n",
-				  &rt->rt_dst, &rt->rt_src);
+				  &fl4->daddr, &fl4->saddr);
 	else
 		SCTP_DEBUG_PRINTK("NO ROUTE\n");
-
-	return dst;
 }
 
 /* For v4, the source address is cached in the route entry(dst). So no need
  * to cache it separately and hence this is an empty routine.
  */
 static void sctp_v4_get_saddr(struct sctp_sock *sk,
-			      struct sctp_association *asoc,
-			      struct dst_entry *dst,
-			      union sctp_addr *daddr,
-			      union sctp_addr *saddr)
+			      struct sctp_transport *t,
+			      struct flowi *fl)
 {
-	struct rtable *rt = (struct rtable *)dst;
-
-	if (!asoc)
-		return;
+	union sctp_addr *saddr = &t->saddr;
+	struct rtable *rt = (struct rtable *)t->dst;
 
 	if (rt) {
 		saddr->v4.sin_family = AF_INET;
-		saddr->v4.sin_port = htons(asoc->base.bind_addr.port);
-		saddr->v4.sin_addr.s_addr = rt->rt_src;
+		saddr->v4.sin_addr.s_addr = fl->u.ip4.saddr;
 	}
 }
 
@@ -681,7 +668,7 @@ static int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev,
 		}
 		spin_unlock_bh(&sctp_local_addr_lock);
 		if (found)
-			call_rcu(&addr->rcu, sctp_local_addr_free);
+			kfree_rcu(addr, rcu);
 		break;
 	}
 
@@ -854,14 +841,14 @@ static inline int sctp_v4_xmit(struct sk_buff *skb,
 
 	SCTP_DEBUG_PRINTK("%s: skb:%p, len:%d, src:%pI4, dst:%pI4\n",
 			  __func__, skb, skb->len,
-			  &skb_rtable(skb)->rt_src,
-			  &skb_rtable(skb)->rt_dst);
+			  &transport->fl.u.ip4.saddr,
+			  &transport->fl.u.ip4.daddr);
 
 	inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ?
 			 IP_PMTUDISC_DO : IP_PMTUDISC_DONT;
 
 	SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS);
-	return ip_queue_xmit(skb);
+	return ip_queue_xmit(skb, &transport->fl);
 }
 
 static struct sctp_af sctp_af_inet;
@@ -950,7 +937,6 @@ static struct sctp_af sctp_af_inet = {
 	.to_sk_daddr	   = sctp_v4_to_sk_daddr,
 	.from_addr_param   = sctp_v4_from_addr_param,
 	.to_addr_param	   = sctp_v4_to_addr_param,
-	.dst_saddr	   = sctp_v4_dst_saddr,
 	.cmp_addr	   = sctp_v4_cmp_addr,
 	.addr_valid	   = sctp_v4_addr_valid,
 	.inaddr_any	   = sctp_v4_inaddr_any,
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index b3434cc7d0c..58eb27fed4b 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1075,20 +1075,28 @@ nodata:
 
 /* Make a HEARTBEAT chunk.  */
 struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *asoc,
-				  const struct sctp_transport *transport,
-				  const void *payload, const size_t paylen)
+				  const struct sctp_transport *transport)
 {
-	struct sctp_chunk *retval = sctp_make_chunk(asoc, SCTP_CID_HEARTBEAT,
-						    0, paylen);
+	struct sctp_chunk *retval;
+	sctp_sender_hb_info_t hbinfo;
+
+	retval = sctp_make_chunk(asoc, SCTP_CID_HEARTBEAT, 0, sizeof(hbinfo));
 
 	if (!retval)
 		goto nodata;
 
+	hbinfo.param_hdr.type = SCTP_PARAM_HEARTBEAT_INFO;
+	hbinfo.param_hdr.length = htons(sizeof(sctp_sender_hb_info_t));
+	hbinfo.daddr = transport->ipaddr;
+	hbinfo.sent_at = jiffies;
+	hbinfo.hb_nonce = transport->hb_nonce;
+
 	/* Cast away the 'const', as this is just telling the chunk
 	 * what transport it belongs to.
 	 */
 	retval->transport = (struct sctp_transport *) transport;
-	retval->subh.hbs_hdr = sctp_addto_chunk(retval, paylen, payload);
+	retval->subh.hbs_hdr = sctp_addto_chunk(retval, sizeof(hbinfo),
+						&hbinfo);
 
 nodata:
 	return retval;
@@ -2242,14 +2250,17 @@ int sctp_verify_init(const struct sctp_association *asoc,
  * Returns 0 on failure, else success.
  * FIXME:  This is an association method.
  */
-int sctp_process_init(struct sctp_association *asoc, sctp_cid_t cid,
+int sctp_process_init(struct sctp_association *asoc, struct sctp_chunk *chunk,
 		      const union sctp_addr *peer_addr,
 		      sctp_init_chunk_t *peer_init, gfp_t gfp)
 {
 	union sctp_params param;
 	struct sctp_transport *transport;
 	struct list_head *pos, *temp;
+	struct sctp_af *af;
+	union sctp_addr addr;
 	char *cookie;
+	int src_match = 0;
 
 	/* We must include the address that the INIT packet came from.
 	 * This is the only address that matters for an INIT packet.
@@ -2261,18 +2272,31 @@ int sctp_process_init(struct sctp_association *asoc, sctp_cid_t cid,
 	 * added as the primary transport.  The source address seems to
 	 * be a a better choice than any of the embedded addresses.
 	 */
-	if (peer_addr) {
-		if(!sctp_assoc_add_peer(asoc, peer_addr, gfp, SCTP_ACTIVE))
-			goto nomem;
-	}
+	if(!sctp_assoc_add_peer(asoc, peer_addr, gfp, SCTP_ACTIVE))
+		goto nomem;
+
+	if (sctp_cmp_addr_exact(sctp_source(chunk), peer_addr))
+		src_match = 1;
 
 	/* Process the initialization parameters.  */
 	sctp_walk_params(param, peer_init, init_hdr.params) {
+		if (!src_match && (param.p->type == SCTP_PARAM_IPV4_ADDRESS ||
+		    param.p->type == SCTP_PARAM_IPV6_ADDRESS)) {
+			af = sctp_get_af_specific(param_type2af(param.p->type));
+			af->from_addr_param(&addr, param.addr,
+					    chunk->sctp_hdr->source, 0);
+			if (sctp_cmp_addr_exact(sctp_source(chunk), &addr))
+				src_match = 1;
+		}
 
 		if (!sctp_process_param(asoc, param, peer_addr, gfp))
 			goto clean_up;
 	}
 
+	/* source address of chunk may not match any valid address */
+	if (!src_match)
+		goto clean_up;
+
 	/* AUTH: After processing the parameters, make sure that we
 	 * have all the required info to potentially do authentications.
 	 */
@@ -2923,7 +2947,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 	    asconf_param->param_hdr.type != SCTP_PARAM_SET_PRIMARY)
 		return SCTP_ERROR_UNKNOWN_PARAM;
 
-	switch (addr_param->v4.param_hdr.type) {
+	switch (addr_param->p.type) {
 	case SCTP_PARAM_IPV6_ADDRESS:
 		if (!asoc->peer.ipv6_address)
 			return SCTP_ERROR_DNS_FAILED;
@@ -2936,7 +2960,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 		return SCTP_ERROR_DNS_FAILED;
 	}
 
-	af = sctp_get_af_specific(param_type2af(addr_param->v4.param_hdr.type));
+	af = sctp_get_af_specific(param_type2af(addr_param->p.type));
 	if (unlikely(!af))
 		return SCTP_ERROR_DNS_FAILED;
 
@@ -3100,7 +3124,7 @@ struct sctp_chunk *sctp_process_asconf(struct sctp_association *asoc,
 	/* Skip the address parameter and store a pointer to the first
 	 * asconf parameter.
 	 */
-	length = ntohs(addr_param->v4.param_hdr.length);
+	length = ntohs(addr_param->p.length);
 	asconf_param = (sctp_addip_param_t *)((void *)addr_param + length);
 	chunk_len -= length;
 
@@ -3177,7 +3201,7 @@ static void sctp_asconf_param_success(struct sctp_association *asoc,
 			((void *)asconf_param + sizeof(sctp_addip_param_t));
 
 	/* We have checked the packet before, so we do not check again.	*/
-	af = sctp_get_af_specific(param_type2af(addr_param->v4.param_hdr.type));
+	af = sctp_get_af_specific(param_type2af(addr_param->p.type));
 	af->from_addr_param(&addr, addr_param, htons(bp->port), 0);
 
 	switch (asconf_param->param_hdr.type) {
@@ -3193,11 +3217,8 @@ static void sctp_asconf_param_success(struct sctp_association *asoc,
 		local_bh_enable();
 		list_for_each_entry(transport, &asoc->peer.transport_addr_list,
 				transports) {
-			if (transport->state == SCTP_ACTIVE)
-				continue;
 			dst_release(transport->dst);
-			sctp_transport_route(transport, NULL,
-					     sctp_sk(asoc->base.sk));
+			transport->dst = NULL;
 		}
 		break;
 	case SCTP_PARAM_DEL_IP:
@@ -3207,8 +3228,7 @@ static void sctp_asconf_param_success(struct sctp_association *asoc,
 		list_for_each_entry(transport, &asoc->peer.transport_addr_list,
 				transports) {
 			dst_release(transport->dst);
-			sctp_transport_route(transport, NULL,
-					     sctp_sk(asoc->base.sk));
+			transport->dst = NULL;
 		}
 		break;
 	default:
@@ -3304,7 +3324,7 @@ int sctp_process_asconf_ack(struct sctp_association *asoc,
 	/* Skip the address parameter in the last asconf sent and store a
 	 * pointer to the first asconf parameter.
 	 */
-	length = ntohs(addr_param->v4.param_hdr.length);
+	length = ntohs(addr_param->p.length);
 	asconf_param = (sctp_addip_param_t *)((void *)addr_param + length);
 	asconf_len -= length;
 
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index b21b218d564..d612ca1ca6c 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -482,7 +482,7 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc,
 	 * If the timer was a heartbeat, we only increment error counts
 	 * when we already have an outstanding HEARTBEAT that has not
 	 * been acknowledged.
-	 * Additionaly, some tranport states inhibit error increments.
+	 * Additionally, some tranport states inhibit error increments.
 	 */
 	if (!is_hb) {
 		asoc->overall_error_count++;
@@ -595,8 +595,7 @@ static int sctp_cmd_process_init(sctp_cmd_seq_t *commands,
 	 * fail during INIT processing (due to malloc problems),
 	 * just return the error and stop processing the stack.
 	 */
-	if (!sctp_process_init(asoc, chunk->chunk_hdr->type,
-			       sctp_source(chunk), peer_init, gfp))
+	if (!sctp_process_init(asoc, chunk, sctp_source(chunk), peer_init, gfp))
 		error = -ENOMEM;
 	else
 		error = 0;
@@ -1415,12 +1414,6 @@ static int sctp_cmd_interpreter(sctp_event_t event_type,
 					SCTP_RTXR_T3_RTX);
 			break;
 
-		case SCTP_CMD_TRANSMIT:
-			/* Kick start transmission. */
-			error = sctp_outq_uncork(&asoc->outqueue);
-			local_cork = 0;
-			break;
-
 		case SCTP_CMD_ECN_CE:
 			/* Do delayed CE processing.   */
 			sctp_do_ecn_ce_work(asoc, cmd->obj.u32);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 4b4eb7c96bb..7f4a4f8368e 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -393,8 +393,7 @@ sctp_disposition_t sctp_sf_do_5_1B_init(const struct sctp_endpoint *ep,
 		goto nomem_init;
 
 	/* The call, sctp_process_init(), can fail on memory allocation.  */
-	if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
-			       sctp_source(chunk),
+	if (!sctp_process_init(new_asoc, chunk, sctp_source(chunk),
 			       (sctp_init_chunk_t *)chunk->chunk_hdr,
 			       GFP_ATOMIC))
 		goto nomem_init;
@@ -551,7 +550,7 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(const struct sctp_endpoint *ep,
 		 *
 		 * This means that if we only want to abort associations
 		 * in an authenticated way (i.e AUTH+ABORT), then we
-		 * can't destroy this association just becuase the packet
+		 * can't destroy this association just because the packet
 		 * was malformed.
 		 */
 		if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc))
@@ -725,7 +724,7 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(const struct sctp_endpoint *ep,
 	 */
 	peer_init = &chunk->subh.cookie_hdr->c.peer_init[0];
 
-	if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
+	if (!sctp_process_init(new_asoc, chunk,
 			       &chunk->subh.cookie_hdr->c.peer_addr,
 			       peer_init, GFP_ATOMIC))
 		goto nomem_init;
@@ -942,18 +941,9 @@ static sctp_disposition_t sctp_sf_heartbeat(const struct sctp_endpoint *ep,
 {
 	struct sctp_transport *transport = (struct sctp_transport *) arg;
 	struct sctp_chunk *reply;
-	sctp_sender_hb_info_t hbinfo;
-	size_t paylen = 0;
-
-	hbinfo.param_hdr.type = SCTP_PARAM_HEARTBEAT_INFO;
-	hbinfo.param_hdr.length = htons(sizeof(sctp_sender_hb_info_t));
-	hbinfo.daddr = transport->ipaddr;
-	hbinfo.sent_at = jiffies;
-	hbinfo.hb_nonce = transport->hb_nonce;
 
 	/* Send a heartbeat to our peer.  */
-	paylen = sizeof(sctp_sender_hb_info_t);
-	reply = sctp_make_heartbeat(asoc, transport, &hbinfo, paylen);
+	reply = sctp_make_heartbeat(asoc, transport);
 	if (!reply)
 		return SCTP_DISPOSITION_NOMEM;
 
@@ -1464,8 +1454,7 @@ static sctp_disposition_t sctp_sf_do_unexpected_init(
 	 * Verification Tag and Peers Verification tag into a reserved
 	 * place (local tie-tag and per tie-tag) within the state cookie.
 	 */
-	if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
-			       sctp_source(chunk),
+	if (!sctp_process_init(new_asoc, chunk, sctp_source(chunk),
 			       (sctp_init_chunk_t *)chunk->chunk_hdr,
 			       GFP_ATOMIC))
 		goto nomem;
@@ -1546,7 +1535,7 @@ cleanup:
 }
 
 /*
- * Handle simultanous INIT.
+ * Handle simultaneous INIT.
  * This means we started an INIT and then we got an INIT request from
  * our peer.
  *
@@ -1694,8 +1683,7 @@ static sctp_disposition_t sctp_sf_do_dupcook_a(const struct sctp_endpoint *ep,
 	 */
 	peer_init = &chunk->subh.cookie_hdr->c.peer_init[0];
 
-	if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
-			       sctp_source(chunk), peer_init,
+	if (!sctp_process_init(new_asoc, chunk, sctp_source(chunk), peer_init,
 			       GFP_ATOMIC))
 		goto nomem;
 
@@ -1780,8 +1768,7 @@ static sctp_disposition_t sctp_sf_do_dupcook_b(const struct sctp_endpoint *ep,
 	 * side effects--it is safe to run them here.
 	 */
 	peer_init = &chunk->subh.cookie_hdr->c.peer_init[0];
-	if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
-			       sctp_source(chunk), peer_init,
+	if (!sctp_process_init(new_asoc, chunk, sctp_source(chunk), peer_init,
 			       GFP_ATOMIC))
 		goto nomem;
 
@@ -2079,7 +2066,7 @@ sctp_disposition_t sctp_sf_shutdown_pending_abort(
 	 * RFC 2960, Section 3.3.7
 	 *    If an endpoint receives an ABORT with a format error or for an
 	 *    association that doesn't exist, it MUST silently discard it.
-	 * Becasue the length is "invalid", we can't really discard just
+	 * Because the length is "invalid", we can't really discard just
 	 * as we do not know its true length.  So, to be safe, discard the
 	 * packet.
 	 */
@@ -2120,7 +2107,7 @@ sctp_disposition_t sctp_sf_shutdown_sent_abort(const struct sctp_endpoint *ep,
 	 * RFC 2960, Section 3.3.7
 	 *    If an endpoint receives an ABORT with a format error or for an
 	 *    association that doesn't exist, it MUST silently discard it.
-	 * Becasue the length is "invalid", we can't really discard just
+	 * Because the length is "invalid", we can't really discard just
 	 * as we do not know its true length.  So, to be safe, discard the
 	 * packet.
 	 */
@@ -2381,7 +2368,7 @@ sctp_disposition_t sctp_sf_do_9_1_abort(const struct sctp_endpoint *ep,
 	 * RFC 2960, Section 3.3.7
 	 *    If an endpoint receives an ABORT with a format error or for an
 	 *    association that doesn't exist, it MUST silently discard it.
-	 * Becasue the length is "invalid", we can't really discard just
+	 * Because the length is "invalid", we can't really discard just
 	 * as we do not know its true length.  So, to be safe, discard the
 	 * packet.
 	 */
@@ -2412,8 +2399,15 @@ static sctp_disposition_t __sctp_sf_do_9_1_abort(const struct sctp_endpoint *ep,
 
 	/* See if we have an error cause code in the chunk.  */
 	len = ntohs(chunk->chunk_hdr->length);
-	if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr))
+	if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr)) {
+
+		sctp_errhdr_t *err;
+		sctp_walk_errors(err, chunk->chunk_hdr);
+		if ((void *)err != (void *)chunk->chunk_end)
+			return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
+
 		error = ((sctp_errhdr_t *)chunk->skb->data)->cause;
+	}
 
 	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(ECONNRESET));
 	/* ASSOC_FAILED will DELETE_TCB. */
@@ -2448,7 +2442,7 @@ sctp_disposition_t sctp_sf_cookie_wait_abort(const struct sctp_endpoint *ep,
 	 * RFC 2960, Section 3.3.7
 	 *    If an endpoint receives an ABORT with a format error or for an
 	 *    association that doesn't exist, it MUST silently discard it.
-	 * Becasue the length is "invalid", we can't really discard just
+	 * Because the length is "invalid", we can't really discard just
 	 * as we do not know its true length.  So, to be safe, discard the
 	 * packet.
 	 */
@@ -3204,6 +3198,7 @@ sctp_disposition_t sctp_sf_operr_notify(const struct sctp_endpoint *ep,
 					sctp_cmd_seq_t *commands)
 {
 	struct sctp_chunk *chunk = arg;
+	sctp_errhdr_t *err;
 
 	if (!sctp_vtag_verify(chunk, asoc))
 		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -3212,6 +3207,10 @@ sctp_disposition_t sctp_sf_operr_notify(const struct sctp_endpoint *ep,
 	if (!sctp_chunk_length_valid(chunk, sizeof(sctp_operr_chunk_t)))
 		return sctp_sf_violation_chunklen(ep, asoc, type, arg,
 						  commands);
+	sctp_walk_errors(err, chunk->chunk_hdr);
+	if ((void *)err != (void *)chunk->chunk_end)
+		return sctp_sf_violation_paramlen(ep, asoc, type, arg,
+						  (void *)err, commands);
 
 	sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
 			SCTP_CHUNK(chunk));
@@ -3320,8 +3319,10 @@ sctp_disposition_t sctp_sf_ootb(const struct sctp_endpoint *ep,
 	struct sctp_chunk *chunk = arg;
 	struct sk_buff *skb = chunk->skb;
 	sctp_chunkhdr_t *ch;
+	sctp_errhdr_t *err;
 	__u8 *ch_end;
 	int ootb_shut_ack = 0;
+	int ootb_cookie_ack = 0;
 
 	SCTP_INC_STATS(SCTP_MIB_OUTOFBLUES);
 
@@ -3346,6 +3347,23 @@ sctp_disposition_t sctp_sf_ootb(const struct sctp_endpoint *ep,
 		if (SCTP_CID_ABORT == ch->type)
 			return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
 
+		/* RFC 8.4, 7) If the packet contains a "Stale cookie" ERROR
+		 * or a COOKIE ACK the SCTP Packet should be silently
+		 * discarded.
+		 */
+
+		if (SCTP_CID_COOKIE_ACK == ch->type)
+			ootb_cookie_ack = 1;
+
+		if (SCTP_CID_ERROR == ch->type) {
+			sctp_walk_errors(err, ch) {
+				if (SCTP_ERROR_STALE_COOKIE == err->cause) {
+					ootb_cookie_ack = 1;
+					break;
+				}
+			}
+		}
+
 		/* Report violation if chunk len overflows */
 		ch_end = ((__u8 *)ch) + WORD_ROUND(ntohs(ch->length));
 		if (ch_end > skb_tail_pointer(skb))
@@ -3357,6 +3375,8 @@ sctp_disposition_t sctp_sf_ootb(const struct sctp_endpoint *ep,
 
 	if (ootb_shut_ack)
 		return sctp_sf_shut_8_4_5(ep, asoc, type, arg, commands);
+	else if (ootb_cookie_ack)
+		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
 	else
 		return sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands);
 }
@@ -3855,7 +3875,7 @@ gen_shutdown:
 }
 
 /*
- * SCTP-AUTH Section 6.3 Receving authenticated chukns
+ * SCTP-AUTH Section 6.3 Receiving authenticated chukns
  *
  *    The receiver MUST use the HMAC algorithm indicated in the HMAC
  *    Identifier field.  If this algorithm was not specified by the
@@ -4231,7 +4251,7 @@ static sctp_disposition_t sctp_sf_abort_violation(
 	 *
 	 * This means that if we only want to abort associations
 	 * in an authenticated way (i.e AUTH+ABORT), then we
-	 * can't destroy this association just becuase the packet
+	 * can't destroy this association just because the packet
 	 * was malformed.
 	 */
 	if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc))
@@ -4343,8 +4363,9 @@ static sctp_disposition_t sctp_sf_violation_chunklen(
 
 /*
  * Handle a protocol violation when the parameter length is invalid.
- * "Invalid" length is identified as smaller than the minimal length a
- * given parameter can be.
+ * If the length is smaller than the minimum length of a given parameter,
+ * or accumulated length in multi parameters exceeds the end of the chunk,
+ * the length is considered as invalid.
  */
 static sctp_disposition_t sctp_sf_violation_paramlen(
 				     const struct sctp_endpoint *ep,
@@ -4402,9 +4423,9 @@ static sctp_disposition_t sctp_sf_violation_ctsn(
 }
 
 /* Handle protocol violation of an invalid chunk bundling.  For example,
- * when we have an association and we recieve bundled INIT-ACK, or
+ * when we have an association and we receive bundled INIT-ACK, or
  * SHUDOWN-COMPLETE, our peer is clearly violationg the "MUST NOT bundle"
- * statement from the specs.  Additinally, there might be an attacker
+ * statement from the specs.  Additionally, there might be an attacker
  * on the path and we may not want to continue this communication.
  */
 static sctp_disposition_t sctp_sf_violation_chunk(
@@ -5056,6 +5077,30 @@ sctp_disposition_t sctp_sf_ignore_primitive(
  ***************************************************************************/
 
 /*
+ * When the SCTP stack has no more user data to send or retransmit, this
+ * notification is given to the user. Also, at the time when a user app
+ * subscribes to this event, if there is no data to be sent or
+ * retransmit, the stack will immediately send up this notification.
+ */
+sctp_disposition_t sctp_sf_do_no_pending_tsn(
+	const struct sctp_endpoint *ep,
+	const struct sctp_association *asoc,
+	const sctp_subtype_t type,
+	void *arg,
+	sctp_cmd_seq_t *commands)
+{
+	struct sctp_ulpevent *event;
+
+	event = sctp_ulpevent_make_sender_dry_event(asoc, GFP_ATOMIC);
+	if (!event)
+		return SCTP_DISPOSITION_NOMEM;
+
+	sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(event));
+
+	return SCTP_DISPOSITION_CONSUME;
+}
+
+/*
  * Start the shutdown negotiation.
  *
  * From Section 9.2:
diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c
index 546d4387fb3..0338dc6fdc9 100644
--- a/net/sctp/sm_statetable.c
+++ b/net/sctp/sm_statetable.c
@@ -107,8 +107,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 #define TYPE_SCTP_FUNC(func) {.fn = func, .name = #func}
 
 #define TYPE_SCTP_DATA { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -128,8 +126,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_DATA */
 
 #define TYPE_SCTP_INIT { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_do_5_1B_init), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -149,8 +145,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_INIT */
 
 #define TYPE_SCTP_INIT_ACK { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_do_5_2_3_initack), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -170,8 +164,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_INIT_ACK */
 
 #define TYPE_SCTP_SACK { \
-	/*  SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -191,8 +183,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_SACK */
 
 #define TYPE_SCTP_HEARTBEAT { \
-	/*  SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -213,8 +203,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_HEARTBEAT */
 
 #define TYPE_SCTP_HEARTBEAT_ACK { \
-	/*  SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -234,8 +222,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_HEARTBEAT_ACK */
 
 #define TYPE_SCTP_ABORT { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_pdiscard), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -255,8 +241,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_ABORT */
 
 #define TYPE_SCTP_SHUTDOWN { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -276,8 +260,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_SHUTDOWN */
 
 #define TYPE_SCTP_SHUTDOWN_ACK { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -297,8 +279,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_SHUTDOWN_ACK */
 
 #define TYPE_SCTP_ERROR { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -318,8 +298,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_ERROR */
 
 #define TYPE_SCTP_COOKIE_ECHO { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_do_5_1D_ce), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -339,8 +317,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_COOKIE_ECHO */
 
 #define TYPE_SCTP_COOKIE_ACK { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -360,8 +336,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_COOKIE_ACK */
 
 #define TYPE_SCTP_ECN_ECNE { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -381,8 +355,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_ECN_ECNE */
 
 #define TYPE_SCTP_ECN_CWR { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -402,8 +374,6 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 } /* TYPE_SCTP_ECN_CWR */
 
 #define TYPE_SCTP_SHUTDOWN_COMPLETE { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -446,8 +416,6 @@ static const sctp_sm_table_entry_t chunk_event_table[SCTP_NUM_BASE_CHUNK_TYPES][
 }; /* state_fn_t chunk_event_table[][] */
 
 #define TYPE_SCTP_ASCONF { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -467,8 +435,6 @@ static const sctp_sm_table_entry_t chunk_event_table[SCTP_NUM_BASE_CHUNK_TYPES][
 } /* TYPE_SCTP_ASCONF */
 
 #define TYPE_SCTP_ASCONF_ACK { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -496,8 +462,6 @@ static const sctp_sm_table_entry_t addip_chunk_event_table[SCTP_NUM_ADDIP_CHUNK_
 }; /*state_fn_t addip_chunk_event_table[][] */
 
 #define TYPE_SCTP_FWD_TSN { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -524,8 +488,6 @@ static const sctp_sm_table_entry_t prsctp_chunk_event_table[SCTP_NUM_PRSCTP_CHUN
 }; /*state_fn_t prsctp_chunk_event_table[][] */
 
 #define TYPE_SCTP_AUTH { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ootb), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -553,8 +515,6 @@ static const sctp_sm_table_entry_t auth_chunk_event_table[SCTP_NUM_AUTH_CHUNK_TY
 
 static const sctp_sm_table_entry_t
 chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
-	/* SCTP_STATE_EMPTY */
-	TYPE_SCTP_FUNC(sctp_sf_ootb),
 	/* SCTP_STATE_CLOSED */
 	TYPE_SCTP_FUNC(sctp_sf_ootb),
 	/* SCTP_STATE_COOKIE_WAIT */
@@ -575,8 +535,6 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 
 
 #define TYPE_SCTP_PRIMITIVE_ASSOCIATE  { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_do_prm_asoc), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -596,8 +554,6 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 } /* TYPE_SCTP_PRIMITIVE_ASSOCIATE */
 
 #define TYPE_SCTP_PRIMITIVE_SHUTDOWN  { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_error_closed), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -617,8 +573,6 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 } /* TYPE_SCTP_PRIMITIVE_SHUTDOWN */
 
 #define TYPE_SCTP_PRIMITIVE_ABORT  { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_error_closed), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -638,8 +592,6 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 } /* TYPE_SCTP_PRIMITIVE_ABORT */
 
 #define TYPE_SCTP_PRIMITIVE_SEND  { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_error_closed), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -659,8 +611,6 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 } /* TYPE_SCTP_PRIMITIVE_SEND */
 
 #define TYPE_SCTP_PRIMITIVE_REQUESTHEARTBEAT  { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_error_closed), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -680,8 +630,6 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 } /* TYPE_SCTP_PRIMITIVE_REQUESTHEARTBEAT */
 
 #define TYPE_SCTP_PRIMITIVE_ASCONF { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_error_closed), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -713,8 +661,6 @@ static const sctp_sm_table_entry_t primitive_event_table[SCTP_NUM_PRIMITIVE_TYPE
 };
 
 #define TYPE_SCTP_OTHER_NO_PENDING_TSN  { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ignore_other), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -722,7 +668,7 @@ static const sctp_sm_table_entry_t primitive_event_table[SCTP_NUM_PRIMITIVE_TYPE
 	/* SCTP_STATE_COOKIE_ECHOED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ignore_other), \
 	/* SCTP_STATE_ESTABLISHED */ \
-	TYPE_SCTP_FUNC(sctp_sf_ignore_other), \
+	TYPE_SCTP_FUNC(sctp_sf_do_no_pending_tsn), \
 	/* SCTP_STATE_SHUTDOWN_PENDING */ \
 	TYPE_SCTP_FUNC(sctp_sf_do_9_2_start_shutdown), \
 	/* SCTP_STATE_SHUTDOWN_SENT */ \
@@ -734,8 +680,6 @@ static const sctp_sm_table_entry_t primitive_event_table[SCTP_NUM_PRIMITIVE_TYPE
 }
 
 #define TYPE_SCTP_OTHER_ICMP_PROTO_UNREACH  { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_ignore_other), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -760,8 +704,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 };
 
 #define TYPE_SCTP_EVENT_TIMEOUT_NONE { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -781,8 +723,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_T1_COOKIE { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -802,8 +742,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_T1_INIT { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -823,8 +761,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_T2_SHUTDOWN { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -844,8 +780,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_T3_RTX { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -865,8 +799,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_T4_RTO { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -886,8 +818,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -907,8 +837,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_HEARTBEAT { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -928,8 +856,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_SACK { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_bug), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
@@ -949,8 +875,6 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_
 }
 
 #define TYPE_SCTP_EVENT_TIMEOUT_AUTOCLOSE { \
-	/* SCTP_STATE_EMPTY */ \
-	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_CLOSED */ \
 	TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
 	/* SCTP_STATE_COOKIE_WAIT */ \
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 3951a10605b..6766913a53e 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -658,11 +658,15 @@ static int sctp_bindx_rem(struct sock *sk, struct sockaddr *addrs, int addrcnt)
 			goto err_bindx_rem;
 		}
 
-		if (sa_addr->v4.sin_port != htons(bp->port)) {
+		if (sa_addr->v4.sin_port &&
+		    sa_addr->v4.sin_port != htons(bp->port)) {
 			retval = -EINVAL;
 			goto err_bindx_rem;
 		}
 
+		if (!sa_addr->v4.sin_port)
+			sa_addr->v4.sin_port = htons(bp->port);
+
 		/* FIXME - There is probably a need to check if sk->sk_saddr and
 		 * sk->sk_rcv_addr are currently set to one of the addresses to
 		 * be removed. This is something which needs to be looked into
@@ -1193,7 +1197,7 @@ out_free:
  * an endpoint that is multi-homed.  Much like sctp_bindx() this call
  * allows a caller to specify multiple addresses at which a peer can be
  * reached.  The way the SCTP stack uses the list of addresses to set up
- * the association is implementation dependant.  This function only
+ * the association is implementation dependent.  This function only
  * specifies that the stack will try to make use of all the addresses in
  * the list when needed.
  *
@@ -1492,7 +1496,7 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk,
 	struct sctp_chunk *chunk;
 	union sctp_addr to;
 	struct sockaddr *msg_name = NULL;
-	struct sctp_sndrcvinfo default_sinfo = { 0 };
+	struct sctp_sndrcvinfo default_sinfo;
 	struct sctp_sndrcvinfo *sinfo;
 	struct sctp_initmsg *sinit;
 	sctp_assoc_t associd = 0;
@@ -1756,6 +1760,7 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk,
 		/* If the user didn't specify SNDRCVINFO, make up one with
 		 * some defaults.
 		 */
+		memset(&default_sinfo, 0, sizeof(default_sinfo));
 		default_sinfo.sinfo_stream = asoc->default_stream;
 		default_sinfo.sinfo_flags = asoc->default_flags;
 		default_sinfo.sinfo_ppid = asoc->default_ppid;
@@ -1786,12 +1791,10 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk,
 		goto out_free;
 	}
 
-	if (sinfo) {
-		/* Check for invalid stream. */
-		if (sinfo->sinfo_stream >= asoc->c.sinit_num_ostreams) {
-			err = -EINVAL;
-			goto out_free;
-		}
+	/* Check for invalid stream. */
+	if (sinfo->sinfo_stream >= asoc->c.sinit_num_ostreams) {
+		err = -EINVAL;
+		goto out_free;
 	}
 
 	timeo = sock_sndtimeo(sk, msg->msg_flags & MSG_DONTWAIT);
@@ -2283,7 +2286,7 @@ static int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
 			trans->param_flags =
 				(trans->param_flags & ~SPP_PMTUD) | pmtud_change;
 			if (update) {
-				sctp_transport_pmtu(trans);
+				sctp_transport_pmtu(trans, sctp_opt2sk(sp));
 				sctp_assoc_sync_pmtu(asoc);
 			}
 		} else if (asoc) {
@@ -3215,14 +3218,9 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk,
 	if (optlen < sizeof(struct sctp_hmacalgo))
 		return -EINVAL;
 
-	hmacs = kmalloc(optlen, GFP_KERNEL);
-	if (!hmacs)
-		return -ENOMEM;
-
-	if (copy_from_user(hmacs, optval, optlen)) {
-		err = -EFAULT;
-		goto out;
-	}
+	hmacs= memdup_user(optval, optlen);
+	if (IS_ERR(hmacs))
+		return PTR_ERR(hmacs);
 
 	idents = hmacs->shmac_num_idents;
 	if (idents == 0 || idents > SCTP_AUTH_NUM_HMACS ||
@@ -3257,14 +3255,9 @@ static int sctp_setsockopt_auth_key(struct sock *sk,
 	if (optlen <= sizeof(struct sctp_authkey))
 		return -EINVAL;
 
-	authkey = kmalloc(optlen, GFP_KERNEL);
-	if (!authkey)
-		return -ENOMEM;
-
-	if (copy_from_user(authkey, optval, optlen)) {
-		ret = -EFAULT;
-		goto out;
-	}
+	authkey= memdup_user(optval, optlen);
+	if (IS_ERR(authkey))
+		return PTR_ERR(authkey);
 
 	if (authkey->sca_keylength > optlen - sizeof(struct sctp_authkey)) {
 		ret = -EINVAL;
@@ -5283,6 +5276,55 @@ static int sctp_getsockopt_assoc_number(struct sock *sk, int len,
 	return 0;
 }
 
+/*
+ * 8.2.6. Get the Current Identifiers of Associations
+ *        (SCTP_GET_ASSOC_ID_LIST)
+ *
+ * This option gets the current list of SCTP association identifiers of
+ * the SCTP associations handled by a one-to-many style socket.
+ */
+static int sctp_getsockopt_assoc_ids(struct sock *sk, int len,
+				    char __user *optval, int __user *optlen)
+{
+	struct sctp_sock *sp = sctp_sk(sk);
+	struct sctp_association *asoc;
+	struct sctp_assoc_ids *ids;
+	u32 num = 0;
+
+	if (sctp_style(sk, TCP))
+		return -EOPNOTSUPP;
+
+	if (len < sizeof(struct sctp_assoc_ids))
+		return -EINVAL;
+
+	list_for_each_entry(asoc, &(sp->ep->asocs), asocs) {
+		num++;
+	}
+
+	if (len < sizeof(struct sctp_assoc_ids) + sizeof(sctp_assoc_t) * num)
+		return -EINVAL;
+
+	len = sizeof(struct sctp_assoc_ids) + sizeof(sctp_assoc_t) * num;
+
+	ids = kmalloc(len, GFP_KERNEL);
+	if (unlikely(!ids))
+		return -ENOMEM;
+
+	ids->gaids_number_of_ids = num;
+	num = 0;
+	list_for_each_entry(asoc, &(sp->ep->asocs), asocs) {
+		ids->gaids_assoc_id[num++] = asoc->assoc_id;
+	}
+
+	if (put_user(len, optlen) || copy_to_user(optval, ids, len)) {
+		kfree(ids);
+		return -EFAULT;
+	}
+
+	kfree(ids);
+	return 0;
+}
+
 SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname,
 				char __user *optval, int __user *optlen)
 {
@@ -5415,6 +5457,9 @@ SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname,
 	case SCTP_GET_ASSOC_NUMBER:
 		retval = sctp_getsockopt_assoc_number(sk, len, optval, optlen);
 		break;
+	case SCTP_GET_ASSOC_ID_LIST:
+		retval = sctp_getsockopt_assoc_ids(sk, len, optval, optlen);
+		break;
 	default:
 		retval = -ENOPROTOOPT;
 		break;
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index d3ae493d234..394c57ca2f5 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -211,15 +211,17 @@ void sctp_transport_set_owner(struct sctp_transport *transport,
 }
 
 /* Initialize the pmtu of a transport. */
-void sctp_transport_pmtu(struct sctp_transport *transport)
+void sctp_transport_pmtu(struct sctp_transport *transport, struct sock *sk)
 {
-	struct dst_entry *dst;
-
-	dst = transport->af_specific->get_dst(NULL, &transport->ipaddr, NULL);
+	/* If we don't have a fresh route, look one up */
+	if (!transport->dst || transport->dst->obsolete > 1) {
+		dst_release(transport->dst);
+		transport->af_specific->get_dst(transport, &transport->saddr,
+						&transport->fl, sk);
+	}
 
-	if (dst) {
-		transport->pathmtu = dst_mtu(dst);
-		dst_release(dst);
+	if (transport->dst) {
+		transport->pathmtu = dst_mtu(transport->dst);
 	} else
 		transport->pathmtu = SCTP_DEFAULT_MAXSEGMENT;
 }
@@ -270,22 +272,19 @@ void sctp_transport_route(struct sctp_transport *transport,
 {
 	struct sctp_association *asoc = transport->asoc;
 	struct sctp_af *af = transport->af_specific;
-	union sctp_addr *daddr = &transport->ipaddr;
-	struct dst_entry *dst;
 
-	dst = af->get_dst(asoc, daddr, saddr);
+	af->get_dst(transport, saddr, &transport->fl, sctp_opt2sk(opt));
 
 	if (saddr)
 		memcpy(&transport->saddr, saddr, sizeof(union sctp_addr));
 	else
-		af->get_saddr(opt, asoc, dst, daddr, &transport->saddr);
+		af->get_saddr(opt, transport, &transport->fl);
 
-	transport->dst = dst;
 	if ((transport->param_flags & SPP_PMTUD_DISABLE) && transport->pathmtu) {
 		return;
 	}
-	if (dst) {
-		transport->pathmtu = dst_mtu(dst);
+	if (transport->dst) {
+		transport->pathmtu = dst_mtu(transport->dst);
 
 		/* Initialize sk->sk_rcv_saddr, if the transport is the
 		 * association's active path for getsockname().
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index aa72e89c3ee..e70e5fc8789 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -554,7 +554,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_send_failed(
 	memcpy(&ssf->ssf_info, &chunk->sinfo, sizeof(struct sctp_sndrcvinfo));
 
 	/* Per TSVWG discussion with Randy. Allow the application to
-	 * ressemble a fragmented message.
+	 * reassemble a fragmented message.
 	 */
 	ssf->ssf_info.sinfo_flags = chunk->chunk_hdr->flags;
 
@@ -843,7 +843,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_authkey(
 	ak = (struct sctp_authkey_event *)
 		skb_put(skb, sizeof(struct sctp_authkey_event));
 
-	ak->auth_type = SCTP_AUTHENTICATION_INDICATION;
+	ak->auth_type = SCTP_AUTHENTICATION_EVENT;
 	ak->auth_flags = 0;
 	ak->auth_length = sizeof(struct sctp_authkey_event);
 
@@ -862,6 +862,34 @@ fail:
 	return NULL;
 }
 
+/*
+ * Socket Extensions for SCTP
+ * 6.3.10. SCTP_SENDER_DRY_EVENT
+ */
+struct sctp_ulpevent *sctp_ulpevent_make_sender_dry_event(
+	const struct sctp_association *asoc, gfp_t gfp)
+{
+	struct sctp_ulpevent *event;
+	struct sctp_sender_dry_event *sdry;
+	struct sk_buff *skb;
+
+	event = sctp_ulpevent_new(sizeof(struct sctp_sender_dry_event),
+				  MSG_NOTIFICATION, gfp);
+	if (!event)
+		return NULL;
+
+	skb = sctp_event2skb(event);
+	sdry = (struct sctp_sender_dry_event *)
+		skb_put(skb, sizeof(struct sctp_sender_dry_event));
+
+	sdry->sender_dry_type = SCTP_SENDER_DRY_EVENT;
+	sdry->sender_dry_flags = 0;
+	sdry->sender_dry_length = sizeof(struct sctp_sender_dry_event);
+	sctp_ulpevent_set_owner(event, asoc);
+	sdry->sender_dry_assoc_id = sctp_assoc2id(asoc);
+
+	return event;
+}
 
 /* Return the notification type, assuming this is a notification
  * event.
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index 17678189d05..f2d1de7f2ff 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -240,7 +240,7 @@ int sctp_ulpq_tail_event(struct sctp_ulpq *ulpq, struct sctp_ulpevent *event)
 		} else {
 			/*
 			 * If fragment interleave is enabled, we
-			 * can queue this to the recieve queue instead
+			 * can queue this to the receive queue instead
 			 * of the lobby.
 			 */
 			if (sctp_sk(sk)->frag_interleave)
diff --git a/net/socket.c b/net/socket.c
index 5212447c86e..02dc82db3d2 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -263,15 +263,6 @@ static struct inode *sock_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-
-
-static void wq_free_rcu(struct rcu_head *head)
-{
-	struct socket_wq *wq = container_of(head, struct socket_wq, rcu);
-
-	kfree(wq);
-}
-
 static void sock_destroy_inode(struct inode *inode)
 {
 	struct socket_alloc *ei;
@@ -279,7 +270,7 @@ static void sock_destroy_inode(struct inode *inode)
 
 	ei = container_of(inode, struct socket_alloc, vfs_inode);
 	wq = rcu_dereference_protected(ei->socket.wq, 1);
-	call_rcu(&wq->rcu, wq_free_rcu);
+	kfree_rcu(wq, rcu);
 	kmem_cache_free(sock_inode_cachep, ei);
 }
 
@@ -551,11 +542,10 @@ int sock_tx_timestamp(struct sock *sk, __u8 *tx_flags)
 }
 EXPORT_SYMBOL(sock_tx_timestamp);
 
-static inline int __sock_sendmsg(struct kiocb *iocb, struct socket *sock,
-				 struct msghdr *msg, size_t size)
+static inline int __sock_sendmsg_nosec(struct kiocb *iocb, struct socket *sock,
+				       struct msghdr *msg, size_t size)
 {
 	struct sock_iocb *si = kiocb_to_siocb(iocb);
-	int err;
 
 	sock_update_classid(sock->sk);
 
@@ -564,13 +554,17 @@ static inline int __sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	si->msg = msg;
 	si->size = size;
 
-	err = security_socket_sendmsg(sock, msg, size);
-	if (err)
-		return err;
-
 	return sock->ops->sendmsg(iocb, sock, msg, size);
 }
 
+static inline int __sock_sendmsg(struct kiocb *iocb, struct socket *sock,
+				 struct msghdr *msg, size_t size)
+{
+	int err = security_socket_sendmsg(sock, msg, size);
+
+	return err ?: __sock_sendmsg_nosec(iocb, sock, msg, size);
+}
+
 int sock_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 {
 	struct kiocb iocb;
@@ -586,6 +580,20 @@ int sock_sendmsg(struct socket *sock, struct msghdr *msg, size_t size)
 }
 EXPORT_SYMBOL(sock_sendmsg);
 
+int sock_sendmsg_nosec(struct socket *sock, struct msghdr *msg, size_t size)
+{
+	struct kiocb iocb;
+	struct sock_iocb siocb;
+	int ret;
+
+	init_sync_kiocb(&iocb, NULL);
+	iocb.private = &siocb;
+	ret = __sock_sendmsg_nosec(&iocb, sock, msg, size);
+	if (-EIOCBQUEUED == ret)
+		ret = wait_on_sync_kiocb(&iocb);
+	return ret;
+}
+
 int kernel_sendmsg(struct socket *sock, struct msghdr *msg,
 		   struct kvec *vec, size_t num, size_t size)
 {
@@ -1863,57 +1871,47 @@ SYSCALL_DEFINE2(shutdown, int, fd, int, how)
 #define COMPAT_NAMELEN(msg)	COMPAT_MSG(msg, msg_namelen)
 #define COMPAT_FLAGS(msg)	COMPAT_MSG(msg, msg_flags)
 
-/*
- *	BSD sendmsg interface
- */
-
-SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
+static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
+			 struct msghdr *msg_sys, unsigned flags, int nosec)
 {
 	struct compat_msghdr __user *msg_compat =
 	    (struct compat_msghdr __user *)msg;
-	struct socket *sock;
 	struct sockaddr_storage address;
 	struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
 	unsigned char ctl[sizeof(struct cmsghdr) + 20]
 	    __attribute__ ((aligned(sizeof(__kernel_size_t))));
 	/* 20 is size of ipv6_pktinfo */
 	unsigned char *ctl_buf = ctl;
-	struct msghdr msg_sys;
 	int err, ctl_len, iov_size, total_len;
-	int fput_needed;
 
 	err = -EFAULT;
 	if (MSG_CMSG_COMPAT & flags) {
-		if (get_compat_msghdr(&msg_sys, msg_compat))
+		if (get_compat_msghdr(msg_sys, msg_compat))
 			return -EFAULT;
-	} else if (copy_from_user(&msg_sys, msg, sizeof(struct msghdr)))
+	} else if (copy_from_user(msg_sys, msg, sizeof(struct msghdr)))
 		return -EFAULT;
 
-	sock = sockfd_lookup_light(fd, &err, &fput_needed);
-	if (!sock)
-		goto out;
-
 	/* do not move before msg_sys is valid */
 	err = -EMSGSIZE;
-	if (msg_sys.msg_iovlen > UIO_MAXIOV)
-		goto out_put;
+	if (msg_sys->msg_iovlen > UIO_MAXIOV)
+		goto out;
 
 	/* Check whether to allocate the iovec area */
 	err = -ENOMEM;
-	iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
-	if (msg_sys.msg_iovlen > UIO_FASTIOV) {
+	iov_size = msg_sys->msg_iovlen * sizeof(struct iovec);
+	if (msg_sys->msg_iovlen > UIO_FASTIOV) {
 		iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
 		if (!iov)
-			goto out_put;
+			goto out;
 	}
 
 	/* This will also move the address data into kernel space */
 	if (MSG_CMSG_COMPAT & flags) {
-		err = verify_compat_iovec(&msg_sys, iov,
+		err = verify_compat_iovec(msg_sys, iov,
 					  (struct sockaddr *)&address,
 					  VERIFY_READ);
 	} else
-		err = verify_iovec(&msg_sys, iov,
+		err = verify_iovec(msg_sys, iov,
 				   (struct sockaddr *)&address,
 				   VERIFY_READ);
 	if (err < 0)
@@ -1922,17 +1920,17 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
 
 	err = -ENOBUFS;
 
-	if (msg_sys.msg_controllen > INT_MAX)
+	if (msg_sys->msg_controllen > INT_MAX)
 		goto out_freeiov;
-	ctl_len = msg_sys.msg_controllen;
+	ctl_len = msg_sys->msg_controllen;
 	if ((MSG_CMSG_COMPAT & flags) && ctl_len) {
 		err =
-		    cmsghdr_from_user_compat_to_kern(&msg_sys, sock->sk, ctl,
+		    cmsghdr_from_user_compat_to_kern(msg_sys, sock->sk, ctl,
 						     sizeof(ctl));
 		if (err)
 			goto out_freeiov;
-		ctl_buf = msg_sys.msg_control;
-		ctl_len = msg_sys.msg_controllen;
+		ctl_buf = msg_sys->msg_control;
+		ctl_len = msg_sys->msg_controllen;
 	} else if (ctl_len) {
 		if (ctl_len > sizeof(ctl)) {
 			ctl_buf = sock_kmalloc(sock->sk, ctl_len, GFP_KERNEL);
@@ -1941,21 +1939,22 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
 		}
 		err = -EFAULT;
 		/*
-		 * Careful! Before this, msg_sys.msg_control contains a user pointer.
+		 * Careful! Before this, msg_sys->msg_control contains a user pointer.
 		 * Afterwards, it will be a kernel pointer. Thus the compiler-assisted
 		 * checking falls down on this.
 		 */
 		if (copy_from_user(ctl_buf,
-				   (void __user __force *)msg_sys.msg_control,
+				   (void __user __force *)msg_sys->msg_control,
 				   ctl_len))
 			goto out_freectl;
-		msg_sys.msg_control = ctl_buf;
+		msg_sys->msg_control = ctl_buf;
 	}
-	msg_sys.msg_flags = flags;
+	msg_sys->msg_flags = flags;
 
 	if (sock->file->f_flags & O_NONBLOCK)
-		msg_sys.msg_flags |= MSG_DONTWAIT;
-	err = sock_sendmsg(sock, &msg_sys, total_len);
+		msg_sys->msg_flags |= MSG_DONTWAIT;
+	err = (nosec ? sock_sendmsg_nosec : sock_sendmsg)(sock, msg_sys,
+							  total_len);
 
 out_freectl:
 	if (ctl_buf != ctl)
@@ -1963,12 +1962,114 @@ out_freectl:
 out_freeiov:
 	if (iov != iovstack)
 		sock_kfree_s(sock->sk, iov, iov_size);
-out_put:
+out:
+	return err;
+}
+
+/*
+ *	BSD sendmsg interface
+ */
+
+SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
+{
+	int fput_needed, err;
+	struct msghdr msg_sys;
+	struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed);
+
+	if (!sock)
+		goto out;
+
+	err = __sys_sendmsg(sock, msg, &msg_sys, flags, 0);
+
 	fput_light(sock->file, fput_needed);
 out:
 	return err;
 }
 
+/*
+ *	Linux sendmmsg interface
+ */
+
+int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
+		   unsigned int flags)
+{
+	int fput_needed, err, datagrams;
+	struct socket *sock;
+	struct mmsghdr __user *entry;
+	struct compat_mmsghdr __user *compat_entry;
+	struct msghdr msg_sys;
+
+	datagrams = 0;
+
+	sock = sockfd_lookup_light(fd, &err, &fput_needed);
+	if (!sock)
+		return err;
+
+	err = sock_error(sock->sk);
+	if (err)
+		goto out_put;
+
+	entry = mmsg;
+	compat_entry = (struct compat_mmsghdr __user *)mmsg;
+
+	while (datagrams < vlen) {
+		/*
+		 * No need to ask LSM for more than the first datagram.
+		 */
+		if (MSG_CMSG_COMPAT & flags) {
+			err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry,
+					    &msg_sys, flags, datagrams);
+			if (err < 0)
+				break;
+			err = __put_user(err, &compat_entry->msg_len);
+			++compat_entry;
+		} else {
+			err = __sys_sendmsg(sock, (struct msghdr __user *)entry,
+					    &msg_sys, flags, datagrams);
+			if (err < 0)
+				break;
+			err = put_user(err, &entry->msg_len);
+			++entry;
+		}
+
+		if (err)
+			break;
+		++datagrams;
+	}
+
+out_put:
+	fput_light(sock->file, fput_needed);
+
+	if (err == 0)
+		return datagrams;
+
+	if (datagrams != 0) {
+		/*
+		 * We may send less entries than requested (vlen) if the
+		 * sock is non blocking...
+		 */
+		if (err != -EAGAIN) {
+			/*
+			 * ... or if sendmsg returns an error after we
+			 * send some datagrams, where we record the
+			 * error to return on the next call or if the
+			 * app asks about it using getsockopt(SO_ERROR).
+			 */
+			sock->sk->sk_err = -err;
+		}
+
+		return datagrams;
+	}
+
+	return err;
+}
+
+SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg,
+		unsigned int, vlen, unsigned int, flags)
+{
+	return __sys_sendmmsg(fd, mmsg, vlen, flags);
+}
+
 static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
 			 struct msghdr *msg_sys, unsigned flags, int nosec)
 {
@@ -2122,14 +2223,16 @@ int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
 		 */
 		if (MSG_CMSG_COMPAT & flags) {
 			err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry,
-					    &msg_sys, flags, datagrams);
+					    &msg_sys, flags & ~MSG_WAITFORONE,
+					    datagrams);
 			if (err < 0)
 				break;
 			err = __put_user(err, &compat_entry->msg_len);
 			++compat_entry;
 		} else {
 			err = __sys_recvmsg(sock, (struct msghdr __user *)entry,
-					    &msg_sys, flags, datagrams);
+					    &msg_sys, flags & ~MSG_WAITFORONE,
+					    datagrams);
 			if (err < 0)
 				break;
 			err = put_user(err, &entry->msg_len);
@@ -2214,11 +2317,11 @@ SYSCALL_DEFINE5(recvmmsg, int, fd, struct mmsghdr __user *, mmsg,
 #ifdef __ARCH_WANT_SYS_SOCKETCALL
 /* Argument list sizes for sys_socketcall */
 #define AL(x) ((x) * sizeof(unsigned long))
-static const unsigned char nargs[20] = {
+static const unsigned char nargs[21] = {
 	AL(0), AL(3), AL(3), AL(3), AL(2), AL(3),
 	AL(3), AL(3), AL(4), AL(4), AL(4), AL(6),
 	AL(6), AL(2), AL(5), AL(5), AL(3), AL(3),
-	AL(4), AL(5)
+	AL(4), AL(5), AL(4)
 };
 
 #undef AL
@@ -2238,7 +2341,7 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
 	int err;
 	unsigned int len;
 
-	if (call < 1 || call > SYS_RECVMMSG)
+	if (call < 1 || call > SYS_SENDMMSG)
 		return -EINVAL;
 
 	len = nargs[call];
@@ -2313,6 +2416,9 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
 	case SYS_SENDMSG:
 		err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
+	case SYS_SENDMMSG:
+		err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]);
+		break;
 	case SYS_RECVMSG:
 		err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
@@ -2643,13 +2749,13 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32)
 		return -EFAULT;
 
 	if (convert_in) {
-		/* We expect there to be holes between fs.m_u and
+		/* We expect there to be holes between fs.m_ext and
 		 * fs.ring_cookie and at the end of fs, but nowhere else.
 		 */
-		BUILD_BUG_ON(offsetof(struct compat_ethtool_rxnfc, fs.m_u) +
-			     sizeof(compat_rxnfc->fs.m_u) !=
-			     offsetof(struct ethtool_rxnfc, fs.m_u) +
-			     sizeof(rxnfc->fs.m_u));
+		BUILD_BUG_ON(offsetof(struct compat_ethtool_rxnfc, fs.m_ext) +
+			     sizeof(compat_rxnfc->fs.m_ext) !=
+			     offsetof(struct ethtool_rxnfc, fs.m_ext) +
+			     sizeof(rxnfc->fs.m_ext));
 		BUILD_BUG_ON(
 			offsetof(struct compat_ethtool_rxnfc, fs.location) -
 			offsetof(struct compat_ethtool_rxnfc, fs.ring_cookie) !=
@@ -2657,7 +2763,7 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32)
 			offsetof(struct ethtool_rxnfc, fs.ring_cookie));
 
 		if (copy_in_user(rxnfc, compat_rxnfc,
-				 (void *)(&rxnfc->fs.m_u + 1) -
+				 (void *)(&rxnfc->fs.m_ext + 1) -
 				 (void *)rxnfc) ||
 		    copy_in_user(&rxnfc->fs.ring_cookie,
 				 &compat_rxnfc->fs.ring_cookie,
@@ -2674,7 +2780,7 @@ static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32)
 
 	if (convert_out) {
 		if (copy_in_user(compat_rxnfc, rxnfc,
-				 (const void *)(&rxnfc->fs.m_u + 1) -
+				 (const void *)(&rxnfc->fs.m_ext + 1) -
 				 (const void *)rxnfc) ||
 		    copy_in_user(&compat_rxnfc->fs.ring_cookie,
 				 &rxnfc->fs.ring_cookie,
@@ -2986,7 +3092,7 @@ out:
 
 /* Since old style bridge ioctl's endup using SIOCDEVPRIVATE
  * for some operations; this forces use of the newer bridge-utils that
- * use compatiable ioctls
+ * use compatible ioctls
  */
 static int old_bridge_ioctl(compat_ulong_t __user *argp)
 {
diff --git a/net/sunrpc/Kconfig b/net/sunrpc/Kconfig
index 8873fd8ddac..b2198e65d8b 100644
--- a/net/sunrpc/Kconfig
+++ b/net/sunrpc/Kconfig
@@ -18,14 +18,13 @@ config SUNRPC_XPRT_RDMA
 	  If unsure, say N.
 
 config RPCSEC_GSS_KRB5
-	tristate
+	tristate "Secure RPC: Kerberos V mechanism"
 	depends on SUNRPC && CRYPTO
-	prompt "Secure RPC: Kerberos V mechanism" if !(NFS_V4 || NFSD_V4)
+	depends on CRYPTO_MD5 && CRYPTO_DES && CRYPTO_CBC && CRYPTO_CTS
+	depends on CRYPTO_ECB && CRYPTO_HMAC && CRYPTO_SHA1 && CRYPTO_AES
+	depends on CRYPTO_ARC4
 	default y
 	select SUNRPC_GSS
-	select CRYPTO_MD5
-	select CRYPTO_DES
-	select CRYPTO_CBC
 	help
 	  Choose Y here to enable Secure RPC using the Kerberos version 5
 	  GSS-API mechanism (RFC 1964).
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index f3914d0c507..339ba64cce1 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -520,7 +520,7 @@ gss_refresh_upcall(struct rpc_task *task)
 		warn_gssd();
 		task->tk_timeout = 15*HZ;
 		rpc_sleep_on(&pipe_version_rpc_waitqueue, task, NULL);
-		return 0;
+		return -EAGAIN;
 	}
 	if (IS_ERR(gss_msg)) {
 		err = PTR_ERR(gss_msg);
@@ -563,10 +563,12 @@ retry:
 	if (PTR_ERR(gss_msg) == -EAGAIN) {
 		err = wait_event_interruptible_timeout(pipe_version_waitqueue,
 				pipe_version >= 0, 15*HZ);
+		if (pipe_version < 0) {
+			warn_gssd();
+			err = -EACCES;
+		}
 		if (err)
 			goto out;
-		if (pipe_version < 0)
-			warn_gssd();
 		goto retry;
 	}
 	if (IS_ERR(gss_msg)) {
diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c
index 9022f0a6503..0a9a2ec2e46 100644
--- a/net/sunrpc/auth_gss/gss_krb5_mech.c
+++ b/net/sunrpc/auth_gss/gss_krb5_mech.c
@@ -427,7 +427,7 @@ static int
 context_derive_keys_rc4(struct krb5_ctx *ctx)
 {
 	struct crypto_hash *hmac;
-	static const char sigkeyconstant[] = "signaturekey";
+	char sigkeyconstant[] = "signaturekey";
 	int slen = strlen(sigkeyconstant) + 1;	/* include null terminator */
 	struct hash_desc desc;
 	struct scatterlist sg[1];
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index bcdae78fdfc..8d0f7d3c71c 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1101,7 +1101,7 @@ svcauth_gss_accept(struct svc_rqst *rqstp, __be32 *authp)
 
 	/* credential is:
 	 *   version(==1), proc(0,1,2,3), seq, service (1,2,3), handle
-	 * at least 5 u32s, and is preceeded by length, so that makes 6.
+	 * at least 5 u32s, and is preceded by length, so that makes 6.
 	 */
 
 	if (argv->iov_len < 5 * 4)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index e7a96e478f6..8d83f9d4871 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1508,7 +1508,10 @@ call_timeout(struct rpc_task *task)
 		if (clnt->cl_chatty)
 			printk(KERN_NOTICE "%s: server %s not responding, timed out\n",
 				clnt->cl_protname, clnt->cl_server);
-		rpc_exit(task, -EIO);
+		if (task->tk_flags & RPC_TASK_TIMEOUT)
+			rpc_exit(task, -ETIMEDOUT);
+		else
+			rpc_exit(task, -EIO);
 		return;
 	}
 
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 9494c376735..ce5eb68a966 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -906,6 +906,7 @@ void xprt_transmit(struct rpc_task *task)
 	}
 
 	dprintk("RPC: %5u xmit complete\n", task->tk_pid);
+	task->tk_flags |= RPC_TASK_SENT;
 	spin_lock_bh(&xprt->transport_lock);
 
 	xprt->ops->set_retrans_timeout(task);
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 1e336a06d3e..bf005d3c65e 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -504,7 +504,7 @@ static int xs_nospace(struct rpc_task *task)
  *   EAGAIN:	The socket was blocked, please call again later to
  *		complete the request
  * ENOTCONN:	Caller needs to invoke connect logic then call again
- *    other:	Some other error occured, the request was not sent
+ *    other:	Some other error occurred, the request was not sent
  */
 static int xs_udp_send_request(struct rpc_task *task)
 {
@@ -590,7 +590,7 @@ static inline void xs_encode_tcp_record_marker(struct xdr_buf *buf)
  *   EAGAIN:	The socket was blocked, please call again later to
  *		complete the request
  * ENOTCONN:	Caller needs to invoke connect logic then call again
- *    other:	Some other error occured, the request was not sent
+ *    other:	Some other error occurred, the request was not sent
  *
  * XXX: In the case of soft timeouts, should we eventually give up
  *	if sendmsg is not able to make progress?
diff --git a/net/tipc/addr.h b/net/tipc/addr.h
index 8971aba99ae..e4f35afe320 100644
--- a/net/tipc/addr.h
+++ b/net/tipc/addr.h
@@ -37,14 +37,17 @@
 #ifndef _TIPC_ADDR_H
 #define _TIPC_ADDR_H
 
+#define TIPC_ZONE_MASK		0xff000000u
+#define TIPC_CLUSTER_MASK	0xfffff000u
+
 static inline u32 tipc_zone_mask(u32 addr)
 {
-	return addr & 0xff000000u;
+	return addr & TIPC_ZONE_MASK;
 }
 
 static inline u32 tipc_cluster_mask(u32 addr)
 {
-	return addr & 0xfffff000u;
+	return addr & TIPC_CLUSTER_MASK;
 }
 
 static inline int in_own_cluster(u32 addr)
diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c
index 7dc1dc7151e..fa68d1e9ff4 100644
--- a/net/tipc/bcast.c
+++ b/net/tipc/bcast.c
@@ -44,13 +44,6 @@
 
 #define BCLINK_WIN_DEFAULT 20		/* bcast link window size (default) */
 
-/*
- * Loss rate for incoming broadcast frames; used to test retransmission code.
- * Set to N to cause every N'th frame to be discarded; 0 => don't discard any.
- */
-
-#define TIPC_BCAST_LOSS_RATE 0
-
 /**
  * struct bcbearer_pair - a pair of bearers used by broadcast link
  * @primary: pointer to primary bearer
@@ -414,9 +407,7 @@ int tipc_bclink_send_msg(struct sk_buff *buf)
 	spin_lock_bh(&bc_lock);
 
 	res = tipc_link_send_buf(bcl, buf);
-	if (unlikely(res == -ELINKCONG))
-		buf_discard(buf);
-	else
+	if (likely(res > 0))
 		bclink_set_last_sent();
 
 	bcl->stats.queue_sz_counts++;
@@ -434,9 +425,6 @@ int tipc_bclink_send_msg(struct sk_buff *buf)
 
 void tipc_bclink_recv_pkt(struct sk_buff *buf)
 {
-#if (TIPC_BCAST_LOSS_RATE)
-	static int rx_count;
-#endif
 	struct tipc_msg *msg = buf_msg(buf);
 	struct tipc_node *node = tipc_node_find(msg_prevnode(msg));
 	u32 next_in;
@@ -470,14 +458,6 @@ void tipc_bclink_recv_pkt(struct sk_buff *buf)
 		return;
 	}
 
-#if (TIPC_BCAST_LOSS_RATE)
-	if (++rx_count == TIPC_BCAST_LOSS_RATE) {
-		rx_count = 0;
-		buf_discard(buf);
-		return;
-	}
-#endif
-
 	tipc_node_lock(node);
 receive:
 	deferred = node->bclink.deferred_head;
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 411719feb80..85209eadfae 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -46,6 +46,8 @@ static u32 media_count;
 
 struct tipc_bearer tipc_bearers[MAX_BEARERS];
 
+static void bearer_disable(struct tipc_bearer *b_ptr);
+
 /**
  * media_name_valid - validate media name
  *
@@ -342,15 +344,15 @@ struct sk_buff *tipc_bearer_get_names(void)
 void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest)
 {
 	tipc_nmap_add(&b_ptr->nodes, dest);
-	tipc_disc_update_link_req(b_ptr->link_req);
 	tipc_bcbearer_sort();
+	tipc_disc_add_dest(b_ptr->link_req);
 }
 
 void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest)
 {
 	tipc_nmap_remove(&b_ptr->nodes, dest);
-	tipc_disc_update_link_req(b_ptr->link_req);
 	tipc_bcbearer_sort();
+	tipc_disc_remove_dest(b_ptr->link_req);
 }
 
 /*
@@ -493,8 +495,15 @@ int tipc_enable_bearer(const char *name, u32 disc_domain, u32 priority)
 		warn("Bearer <%s> rejected, illegal name\n", name);
 		return -EINVAL;
 	}
-	if (!tipc_addr_domain_valid(disc_domain) ||
-	    !tipc_in_scope(disc_domain, tipc_own_addr)) {
+	if (tipc_addr_domain_valid(disc_domain) &&
+	    (disc_domain != tipc_own_addr)) {
+		if (tipc_in_scope(disc_domain, tipc_own_addr)) {
+			disc_domain = tipc_own_addr & TIPC_CLUSTER_MASK;
+			res = 0;   /* accept any node in own cluster */
+		} else if (in_own_cluster(disc_domain))
+			res = 0;   /* accept specified node in own cluster */
+	}
+	if (res) {
 		warn("Bearer <%s> rejected, illegal discovery domain\n", name);
 		return -EINVAL;
 	}
@@ -511,7 +520,7 @@ int tipc_enable_bearer(const char *name, u32 disc_domain, u32 priority)
 	if (!m_ptr) {
 		warn("Bearer <%s> rejected, media <%s> not registered\n", name,
 		     b_name.media_name);
-		goto failed;
+		goto exit;
 	}
 
 	if (priority == TIPC_MEDIA_LINK_PRI)
@@ -527,14 +536,14 @@ restart:
 		}
 		if (!strcmp(name, tipc_bearers[i].name)) {
 			warn("Bearer <%s> rejected, already enabled\n", name);
-			goto failed;
+			goto exit;
 		}
 		if ((tipc_bearers[i].priority == priority) &&
 		    (++with_this_prio > 2)) {
 			if (priority-- == 0) {
 				warn("Bearer <%s> rejected, duplicate priority\n",
 				     name);
-				goto failed;
+				goto exit;
 			}
 			warn("Bearer <%s> priority adjustment required %u->%u\n",
 			     name, priority + 1, priority);
@@ -544,7 +553,7 @@ restart:
 	if (bearer_id >= MAX_BEARERS) {
 		warn("Bearer <%s> rejected, bearer limit reached (%u)\n",
 		     name, MAX_BEARERS);
-		goto failed;
+		goto exit;
 	}
 
 	b_ptr = &tipc_bearers[bearer_id];
@@ -552,7 +561,7 @@ restart:
 	res = m_ptr->enable_bearer(b_ptr);
 	if (res) {
 		warn("Bearer <%s> rejected, enable failure (%d)\n", name, -res);
-		goto failed;
+		goto exit;
 	}
 
 	b_ptr->identity = bearer_id;
@@ -562,14 +571,18 @@ restart:
 	b_ptr->priority = priority;
 	INIT_LIST_HEAD(&b_ptr->cong_links);
 	INIT_LIST_HEAD(&b_ptr->links);
-	b_ptr->link_req = tipc_disc_init_link_req(b_ptr, &m_ptr->bcast_addr,
-						  disc_domain);
 	spin_lock_init(&b_ptr->lock);
-	write_unlock_bh(&tipc_net_lock);
+
+	res = tipc_disc_create(b_ptr, &m_ptr->bcast_addr, disc_domain);
+	if (res) {
+		bearer_disable(b_ptr);
+		warn("Bearer <%s> rejected, discovery object creation failed\n",
+		     name);
+		goto exit;
+	}
 	info("Enabled bearer <%s>, discovery domain %s, priority %u\n",
 	     name, tipc_addr_string_fill(addr_string, disc_domain), priority);
-	return 0;
-failed:
+exit:
 	write_unlock_bh(&tipc_net_lock);
 	return res;
 }
@@ -620,14 +633,14 @@ static void bearer_disable(struct tipc_bearer *b_ptr)
 	struct link *temp_l_ptr;
 
 	info("Disabling bearer <%s>\n", b_ptr->name);
-	tipc_disc_stop_link_req(b_ptr->link_req);
 	spin_lock_bh(&b_ptr->lock);
-	b_ptr->link_req = NULL;
 	b_ptr->blocked = 1;
 	b_ptr->media->disable_bearer(b_ptr);
 	list_for_each_entry_safe(l_ptr, temp_l_ptr, &b_ptr->links, link_list) {
 		tipc_link_delete(l_ptr);
 	}
+	if (b_ptr->link_req)
+		tipc_disc_delete(b_ptr->link_req);
 	spin_unlock_bh(&b_ptr->lock);
 	memset(b_ptr, 0, sizeof(struct tipc_bearer));
 }
diff --git a/net/tipc/core.c b/net/tipc/core.c
index c9a73e7763f..943b6af8426 100644
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -179,8 +179,7 @@ static int __init tipc_init(void)
 	if (tipc_log_resize(CONFIG_TIPC_LOG) != 0)
 		warn("Unable to create log buffer\n");
 
-	info("Activated (version " TIPC_MOD_VER
-	     " compiled " __DATE__ " " __TIME__ ")\n");
+	info("Activated (version " TIPC_MOD_VER ")\n");
 
 	tipc_own_addr = 0;
 	tipc_remote_management = 1;
diff --git a/net/tipc/discover.c b/net/tipc/discover.c
index 491eff56b9d..0987933155b 100644
--- a/net/tipc/discover.c
+++ b/net/tipc/discover.c
@@ -39,19 +39,17 @@
 #include "discover.h"
 
 #define TIPC_LINK_REQ_INIT	125	/* min delay during bearer start up */
-#define TIPC_LINK_REQ_FAST	2000	/* normal delay if bearer has no links */
-#define TIPC_LINK_REQ_SLOW	600000	/* normal delay if bearer has links */
-
-/*
- * TODO: Most of the inter-cluster setup stuff should be
- * rewritten, and be made conformant with specification.
- */
+#define TIPC_LINK_REQ_FAST	1000	/* max delay if bearer has no links */
+#define TIPC_LINK_REQ_SLOW	60000	/* max delay if bearer has links */
+#define TIPC_LINK_REQ_INACTIVE	0xffffffff /* indicates no timer in use */
 
 
 /**
  * struct link_req - information about an ongoing link setup request
  * @bearer: bearer issuing requests
  * @dest: destination address for request messages
+ * @domain: network domain to which links can be established
+ * @num_nodes: number of nodes currently discovered (i.e. with an active link)
  * @buf: request message to be (repeatedly) sent
  * @timer: timer governing period between requests
  * @timer_intv: current interval between requests (in ms)
@@ -59,6 +57,8 @@
 struct link_req {
 	struct tipc_bearer *bearer;
 	struct tipc_media_addr dest;
+	u32 domain;
+	int num_nodes;
 	struct sk_buff *buf;
 	struct timer_list timer;
 	unsigned int timer_intv;
@@ -147,7 +147,7 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct tipc_bearer *b_ptr)
 	}
 	if (!tipc_in_scope(dest, tipc_own_addr))
 		return;
-	if (!in_own_cluster(orig))
+	if (!tipc_in_scope(b_ptr->link_req->domain, orig))
 		return;
 
 	/* Locate structure corresponding to requesting node */
@@ -214,44 +214,54 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct tipc_bearer *b_ptr)
 }
 
 /**
- * tipc_disc_stop_link_req - stop sending periodic link setup requests
+ * disc_update - update frequency of periodic link setup requests
  * @req: ptr to link request structure
+ *
+ * Reinitiates discovery process if discovery object has no associated nodes
+ * and is either not currently searching or is searching at a slow rate
  */
 
-void tipc_disc_stop_link_req(struct link_req *req)
+static void disc_update(struct link_req *req)
 {
-	if (!req)
-		return;
+	if (!req->num_nodes) {
+		if ((req->timer_intv == TIPC_LINK_REQ_INACTIVE) ||
+		    (req->timer_intv > TIPC_LINK_REQ_FAST)) {
+			req->timer_intv = TIPC_LINK_REQ_INIT;
+			k_start_timer(&req->timer, req->timer_intv);
+		}
+	}
+}
 
-	k_cancel_timer(&req->timer);
-	k_term_timer(&req->timer);
-	buf_discard(req->buf);
-	kfree(req);
+/**
+ * tipc_disc_add_dest - increment set of discovered nodes
+ * @req: ptr to link request structure
+ */
+
+void tipc_disc_add_dest(struct link_req *req)
+{
+	req->num_nodes++;
 }
 
 /**
- * tipc_disc_update_link_req - update frequency of periodic link setup requests
+ * tipc_disc_remove_dest - decrement set of discovered nodes
  * @req: ptr to link request structure
  */
 
-void tipc_disc_update_link_req(struct link_req *req)
+void tipc_disc_remove_dest(struct link_req *req)
 {
-	if (!req)
-		return;
+	req->num_nodes--;
+	disc_update(req);
+}
 
-	if (req->timer_intv == TIPC_LINK_REQ_SLOW) {
-		if (!req->bearer->nodes.count) {
-			req->timer_intv = TIPC_LINK_REQ_FAST;
-			k_start_timer(&req->timer, req->timer_intv);
-		}
-	} else if (req->timer_intv == TIPC_LINK_REQ_FAST) {
-		if (req->bearer->nodes.count) {
-			req->timer_intv = TIPC_LINK_REQ_SLOW;
-			k_start_timer(&req->timer, req->timer_intv);
-		}
-	} else {
-		/* leave timer "as is" if haven't yet reached a "normal" rate */
-	}
+/**
+ * disc_send_msg - send link setup request message
+ * @req: ptr to link request structure
+ */
+
+static void disc_send_msg(struct link_req *req)
+{
+	if (!req->bearer->blocked)
+		tipc_bearer_send(req->bearer, req->buf, &req->dest);
 }
 
 /**
@@ -263,56 +273,86 @@ void tipc_disc_update_link_req(struct link_req *req)
 
 static void disc_timeout(struct link_req *req)
 {
+	int max_delay;
+
 	spin_lock_bh(&req->bearer->lock);
 
-	req->bearer->media->send_msg(req->buf, req->bearer, &req->dest);
-
-	if ((req->timer_intv == TIPC_LINK_REQ_SLOW) ||
-	    (req->timer_intv == TIPC_LINK_REQ_FAST)) {
-		/* leave timer interval "as is" if already at a "normal" rate */
-	} else {
-		req->timer_intv *= 2;
-		if (req->timer_intv > TIPC_LINK_REQ_FAST)
-			req->timer_intv = TIPC_LINK_REQ_FAST;
-		if ((req->timer_intv == TIPC_LINK_REQ_FAST) &&
-		    (req->bearer->nodes.count))
-			req->timer_intv = TIPC_LINK_REQ_SLOW;
+	/* Stop searching if only desired node has been found */
+
+	if (tipc_node(req->domain) && req->num_nodes) {
+		req->timer_intv = TIPC_LINK_REQ_INACTIVE;
+		goto exit;
 	}
-	k_start_timer(&req->timer, req->timer_intv);
 
+	/*
+	 * Send discovery message, then update discovery timer
+	 *
+	 * Keep doubling time between requests until limit is reached;
+	 * hold at fast polling rate if don't have any associated nodes,
+	 * otherwise hold at slow polling rate
+	 */
+
+	disc_send_msg(req);
+
+	req->timer_intv *= 2;
+	if (req->num_nodes)
+		max_delay = TIPC_LINK_REQ_SLOW;
+	else
+		max_delay = TIPC_LINK_REQ_FAST;
+	if (req->timer_intv > max_delay)
+		req->timer_intv = max_delay;
+
+	k_start_timer(&req->timer, req->timer_intv);
+exit:
 	spin_unlock_bh(&req->bearer->lock);
 }
 
 /**
- * tipc_disc_init_link_req - start sending periodic link setup requests
+ * tipc_disc_create - create object to send periodic link setup requests
  * @b_ptr: ptr to bearer issuing requests
  * @dest: destination address for request messages
- * @dest_domain: network domain of node(s) which should respond to message
+ * @dest_domain: network domain to which links can be established
  *
- * Returns pointer to link request structure, or NULL if unable to create.
+ * Returns 0 if successful, otherwise -errno.
  */
 
-struct link_req *tipc_disc_init_link_req(struct tipc_bearer *b_ptr,
-					 const struct tipc_media_addr *dest,
-					 u32 dest_domain)
+int tipc_disc_create(struct tipc_bearer *b_ptr,
+		     struct tipc_media_addr *dest, u32 dest_domain)
 {
 	struct link_req *req;
 
 	req = kmalloc(sizeof(*req), GFP_ATOMIC);
 	if (!req)
-		return NULL;
+		return -ENOMEM;
 
 	req->buf = tipc_disc_init_msg(DSC_REQ_MSG, dest_domain, b_ptr);
 	if (!req->buf) {
 		kfree(req);
-		return NULL;
+		return -ENOMSG;
 	}
 
 	memcpy(&req->dest, dest, sizeof(*dest));
 	req->bearer = b_ptr;
+	req->domain = dest_domain;
+	req->num_nodes = 0;
 	req->timer_intv = TIPC_LINK_REQ_INIT;
 	k_init_timer(&req->timer, (Handler)disc_timeout, (unsigned long)req);
 	k_start_timer(&req->timer, req->timer_intv);
-	return req;
+	b_ptr->link_req = req;
+	disc_send_msg(req);
+	return 0;
+}
+
+/**
+ * tipc_disc_delete - destroy object sending periodic link setup requests
+ * @req: ptr to link request structure
+ */
+
+void tipc_disc_delete(struct link_req *req)
+{
+	k_cancel_timer(&req->timer);
+	k_term_timer(&req->timer);
+	buf_discard(req->buf);
+	kfree(req);
 }
 
diff --git a/net/tipc/discover.h b/net/tipc/discover.h
index e48a167e47b..a3af595b86c 100644
--- a/net/tipc/discover.h
+++ b/net/tipc/discover.h
@@ -39,12 +39,11 @@
 
 struct link_req;
 
-struct link_req *tipc_disc_init_link_req(struct tipc_bearer *b_ptr,
-					 const struct tipc_media_addr *dest,
-					 u32 dest_domain);
-void tipc_disc_update_link_req(struct link_req *req);
-void tipc_disc_stop_link_req(struct link_req *req);
-
+int tipc_disc_create(struct tipc_bearer *b_ptr, struct tipc_media_addr *dest,
+		     u32 dest_domain);
+void tipc_disc_delete(struct link_req *req);
+void tipc_disc_add_dest(struct link_req *req);
+void tipc_disc_remove_dest(struct link_req *req);
 void tipc_disc_recv_msg(struct sk_buff *buf, struct tipc_bearer *b_ptr);
 
 #endif
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 43639ff1cbe..5ed4b4f7452 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -92,7 +92,8 @@ static int  link_recv_changeover_msg(struct link **l_ptr, struct sk_buff **buf);
 static void link_set_supervision_props(struct link *l_ptr, u32 tolerance);
 static int  link_send_sections_long(struct tipc_port *sender,
 				    struct iovec const *msg_sect,
-				    u32 num_sect, u32 destnode);
+				    u32 num_sect, unsigned int total_len,
+				    u32 destnode);
 static void link_check_defragm_bufs(struct link *l_ptr);
 static void link_state_event(struct link *l_ptr, u32 event);
 static void link_reset_statistics(struct link *l_ptr);
@@ -842,6 +843,25 @@ static void link_add_to_outqueue(struct link *l_ptr,
 		l_ptr->stats.max_queue_sz = l_ptr->out_queue_size;
 }
 
+static void link_add_chain_to_outqueue(struct link *l_ptr,
+				       struct sk_buff *buf_chain,
+				       u32 long_msgno)
+{
+	struct sk_buff *buf;
+	struct tipc_msg *msg;
+
+	if (!l_ptr->next_out)
+		l_ptr->next_out = buf_chain;
+	while (buf_chain) {
+		buf = buf_chain;
+		buf_chain = buf_chain->next;
+
+		msg = buf_msg(buf);
+		msg_set_long_msgno(msg, long_msgno);
+		link_add_to_outqueue(l_ptr, buf, msg);
+	}
+}
+
 /*
  * tipc_link_send_buf() is the 'full path' for messages, called from
  * inside TIPC when the 'fast path' in tipc_send_buf
@@ -864,8 +884,9 @@ int tipc_link_send_buf(struct link *l_ptr, struct sk_buff *buf)
 
 	if (unlikely(queue_size >= queue_limit)) {
 		if (imp <= TIPC_CRITICAL_IMPORTANCE) {
-			return link_schedule_port(l_ptr, msg_origport(msg),
-						  size);
+			link_schedule_port(l_ptr, msg_origport(msg), size);
+			buf_discard(buf);
+			return -ELINKCONG;
 		}
 		buf_discard(buf);
 		if (imp > CONN_MANAGER) {
@@ -1042,6 +1063,7 @@ int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode)
 int tipc_link_send_sections_fast(struct tipc_port *sender,
 				 struct iovec const *msg_sect,
 				 const u32 num_sect,
+				 unsigned int total_len,
 				 u32 destaddr)
 {
 	struct tipc_msg *hdr = &sender->phdr;
@@ -1057,8 +1079,8 @@ again:
 	 * (Must not hold any locks while building message.)
 	 */
 
-	res = tipc_msg_build(hdr, msg_sect, num_sect, sender->max_pkt,
-			!sender->user_port, &buf);
+	res = tipc_msg_build(hdr, msg_sect, num_sect, total_len,
+			     sender->max_pkt, !sender->user_port, &buf);
 
 	read_lock_bh(&tipc_net_lock);
 	node = tipc_node_find(destaddr);
@@ -1069,8 +1091,6 @@ again:
 			if (likely(buf)) {
 				res = link_send_buf_fast(l_ptr, buf,
 							 &sender->max_pkt);
-				if (unlikely(res < 0))
-					buf_discard(buf);
 exit:
 				tipc_node_unlock(node);
 				read_unlock_bh(&tipc_net_lock);
@@ -1105,7 +1125,8 @@ exit:
 				goto again;
 
 			return link_send_sections_long(sender, msg_sect,
-						       num_sect, destaddr);
+						       num_sect, total_len,
+						       destaddr);
 		}
 		tipc_node_unlock(node);
 	}
@@ -1117,7 +1138,7 @@ exit:
 		return tipc_reject_msg(buf, TIPC_ERR_NO_NODE);
 	if (res >= 0)
 		return tipc_port_reject_sections(sender, hdr, msg_sect, num_sect,
-						 TIPC_ERR_NO_NODE);
+						 total_len, TIPC_ERR_NO_NODE);
 	return res;
 }
 
@@ -1138,12 +1159,13 @@ exit:
 static int link_send_sections_long(struct tipc_port *sender,
 				   struct iovec const *msg_sect,
 				   u32 num_sect,
+				   unsigned int total_len,
 				   u32 destaddr)
 {
 	struct link *l_ptr;
 	struct tipc_node *node;
 	struct tipc_msg *hdr = &sender->phdr;
-	u32 dsz = msg_data_sz(hdr);
+	u32 dsz = total_len;
 	u32 max_pkt, fragm_sz, rest;
 	struct tipc_msg fragm_hdr;
 	struct sk_buff *buf, *buf_chain, *prev;
@@ -1169,7 +1191,6 @@ again:
 
 	tipc_msg_init(&fragm_hdr, MSG_FRAGMENTER, FIRST_FRAGMENT,
 		 INT_H_SIZE, msg_destnode(hdr));
-	msg_set_link_selector(&fragm_hdr, sender->ref);
 	msg_set_size(&fragm_hdr, max_pkt);
 	msg_set_fragm_no(&fragm_hdr, 1);
 
@@ -1271,28 +1292,15 @@ reject:
 			buf_discard(buf_chain);
 		}
 		return tipc_port_reject_sections(sender, hdr, msg_sect, num_sect,
-						 TIPC_ERR_NO_NODE);
+						 total_len, TIPC_ERR_NO_NODE);
 	}
 
-	/* Append whole chain to send queue: */
+	/* Append chain of fragments to send queue & send them */
 
-	buf = buf_chain;
-	l_ptr->long_msg_seq_no = mod(l_ptr->long_msg_seq_no + 1);
-	if (!l_ptr->next_out)
-		l_ptr->next_out = buf_chain;
+	l_ptr->long_msg_seq_no++;
+	link_add_chain_to_outqueue(l_ptr, buf_chain, l_ptr->long_msg_seq_no);
+	l_ptr->stats.sent_fragments += fragm_no;
 	l_ptr->stats.sent_fragmented++;
-	while (buf) {
-		struct sk_buff *next = buf->next;
-		struct tipc_msg *msg = buf_msg(buf);
-
-		l_ptr->stats.sent_fragments++;
-		msg_set_long_msgno(msg, l_ptr->long_msg_seq_no);
-		link_add_to_outqueue(l_ptr, buf, msg);
-		buf = next;
-	}
-
-	/* Send it, if possible: */
-
 	tipc_link_push_queue(l_ptr);
 	tipc_node_unlock(node);
 	return dsz;
@@ -2407,6 +2415,8 @@ void tipc_link_recv_bundle(struct sk_buff *buf)
  */
 static int link_send_long_buf(struct link *l_ptr, struct sk_buff *buf)
 {
+	struct sk_buff *buf_chain = NULL;
+	struct sk_buff *buf_chain_tail = (struct sk_buff *)&buf_chain;
 	struct tipc_msg *inmsg = buf_msg(buf);
 	struct tipc_msg fragm_hdr;
 	u32 insize = msg_size(inmsg);
@@ -2415,7 +2425,7 @@ static int link_send_long_buf(struct link *l_ptr, struct sk_buff *buf)
 	u32 rest = insize;
 	u32 pack_sz = l_ptr->max_pkt;
 	u32 fragm_sz = pack_sz - INT_H_SIZE;
-	u32 fragm_no = 1;
+	u32 fragm_no = 0;
 	u32 destaddr;
 
 	if (msg_short(inmsg))
@@ -2427,10 +2437,6 @@ static int link_send_long_buf(struct link *l_ptr, struct sk_buff *buf)
 
 	tipc_msg_init(&fragm_hdr, MSG_FRAGMENTER, FIRST_FRAGMENT,
 		 INT_H_SIZE, destaddr);
-	msg_set_link_selector(&fragm_hdr, msg_link_selector(inmsg));
-	msg_set_long_msgno(&fragm_hdr, mod(l_ptr->long_msg_seq_no++));
-	msg_set_fragm_no(&fragm_hdr, fragm_no);
-	l_ptr->stats.sent_fragmented++;
 
 	/* Chop up message: */
 
@@ -2443,27 +2449,37 @@ static int link_send_long_buf(struct link *l_ptr, struct sk_buff *buf)
 		}
 		fragm = tipc_buf_acquire(fragm_sz + INT_H_SIZE);
 		if (fragm == NULL) {
-			warn("Link unable to fragment message\n");
-			dsz = -ENOMEM;
-			goto exit;
+			buf_discard(buf);
+			while (buf_chain) {
+				buf = buf_chain;
+				buf_chain = buf_chain->next;
+				buf_discard(buf);
+			}
+			return -ENOMEM;
 		}
 		msg_set_size(&fragm_hdr, fragm_sz + INT_H_SIZE);
+		fragm_no++;
+		msg_set_fragm_no(&fragm_hdr, fragm_no);
 		skb_copy_to_linear_data(fragm, &fragm_hdr, INT_H_SIZE);
 		skb_copy_to_linear_data_offset(fragm, INT_H_SIZE, crs,
 					       fragm_sz);
-		/*  Send queued messages first, if any: */
+		buf_chain_tail->next = fragm;
+		buf_chain_tail = fragm;
 
-		l_ptr->stats.sent_fragments++;
-		tipc_link_send_buf(l_ptr, fragm);
-		if (!tipc_link_is_up(l_ptr))
-			return dsz;
-		msg_set_fragm_no(&fragm_hdr, ++fragm_no);
 		rest -= fragm_sz;
 		crs += fragm_sz;
 		msg_set_type(&fragm_hdr, FRAGMENT);
 	}
-exit:
 	buf_discard(buf);
+
+	/* Append chain of fragments to send queue & send them */
+
+	l_ptr->long_msg_seq_no++;
+	link_add_chain_to_outqueue(l_ptr, buf_chain, l_ptr->long_msg_seq_no);
+	l_ptr->stats.sent_fragments += fragm_no;
+	l_ptr->stats.sent_fragmented++;
+	tipc_link_push_queue(l_ptr);
+
 	return dsz;
 }
 
@@ -2471,7 +2487,7 @@ exit:
  * A pending message being re-assembled must store certain values
  * to handle subsequent fragments correctly. The following functions
  * help storing these values in unused, available fields in the
- * pending message. This makes dynamic memory allocation unecessary.
+ * pending message. This makes dynamic memory allocation unnecessary.
  */
 
 static void set_long_msg_seqno(struct sk_buff *buf, u32 seqno)
diff --git a/net/tipc/link.h b/net/tipc/link.h
index e6a30dbe1aa..74fbecab1ea 100644
--- a/net/tipc/link.h
+++ b/net/tipc/link.h
@@ -228,6 +228,7 @@ u32 tipc_link_get_max_pkt(u32 dest, u32 selector);
 int tipc_link_send_sections_fast(struct tipc_port *sender,
 				 struct iovec const *msg_sect,
 				 const u32 num_sect,
+				 unsigned int total_len,
 				 u32 destnode);
 void tipc_link_recv_bundle(struct sk_buff *buf);
 int  tipc_link_recv_fragment(struct sk_buff **pending,
diff --git a/net/tipc/msg.c b/net/tipc/msg.c
index 6d92d17e7fb..03e57bf92c7 100644
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -68,20 +68,6 @@ void tipc_msg_init(struct tipc_msg *m, u32 user, u32 type,
 }
 
 /**
- * tipc_msg_calc_data_size - determine total data size for message
- */
-
-int tipc_msg_calc_data_size(struct iovec const *msg_sect, u32 num_sect)
-{
-	int dsz = 0;
-	int i;
-
-	for (i = 0; i < num_sect; i++)
-		dsz += msg_sect[i].iov_len;
-	return dsz;
-}
-
-/**
  * tipc_msg_build - create message using specified header and data
  *
  * Note: Caller must not hold any locks in case copy_from_user() is interrupted!
@@ -89,18 +75,13 @@ int tipc_msg_calc_data_size(struct iovec const *msg_sect, u32 num_sect)
  * Returns message data size or errno
  */
 
-int tipc_msg_build(struct tipc_msg *hdr,
-			    struct iovec const *msg_sect, u32 num_sect,
+int tipc_msg_build(struct tipc_msg *hdr, struct iovec const *msg_sect,
+		   u32 num_sect, unsigned int total_len,
 			    int max_size, int usrmem, struct sk_buff **buf)
 {
 	int dsz, sz, hsz, pos, res, cnt;
 
-	dsz = tipc_msg_calc_data_size(msg_sect, num_sect);
-	if (unlikely(dsz > TIPC_MAX_USER_MSG_SIZE)) {
-		*buf = NULL;
-		return -EINVAL;
-	}
-
+	dsz = total_len;
 	pos = hsz = msg_hdr_sz(hdr);
 	sz = hsz + dsz;
 	msg_set_size(hdr, sz);
diff --git a/net/tipc/msg.h b/net/tipc/msg.h
index de02339fc17..8452454731f 100644
--- a/net/tipc/msg.h
+++ b/net/tipc/msg.h
@@ -39,41 +39,24 @@
 
 #include "bearer.h"
 
+/*
+ * Constants and routines used to read and write TIPC payload message headers
+ *
+ * Note: Some items are also used with TIPC internal message headers
+ */
+
 #define TIPC_VERSION              2
 
 /*
- *		TIPC user data message header format, version 2:
- *
- *
- *     1 0 9 8 7 6 5 4|3 2 1 0 9 8 7 6|5 4 3 2 1 0 9 8|7 6 5 4 3 2 1 0
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w0:|vers | user  |hdr sz |n|d|s|-|          message size           |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w1:|mstyp| error |rer cnt|lsc|opt p|      broadcast ack no         |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w2:|        link level ack no      |   broadcast/link level seq no |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w3:|                       previous node                           |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w4:|                      originating port                         |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w5:|                      destination port                         |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w6:|                      originating node                         |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w7:|                      destination node                         |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w8:|            name type / transport sequence number              |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * w9:|              name instance/multicast lower bound              |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * wA:|                    multicast upper bound                      |
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *    /                                                               /
- *    \                           options                             \
- *    /                                                               /
- *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
+ * Payload message users are defined in TIPC's public API:
+ * - TIPC_LOW_IMPORTANCE
+ * - TIPC_MEDIUM_IMPORTANCE
+ * - TIPC_HIGH_IMPORTANCE
+ * - TIPC_CRITICAL_IMPORTANCE
+ */
+
+/*
+ * Payload message types
  */
 
 #define TIPC_CONN_MSG		0
@@ -81,6 +64,9 @@
 #define TIPC_NAMED_MSG		2
 #define TIPC_DIRECT_MSG		3
 
+/*
+ * Message header sizes
+ */
 
 #define SHORT_H_SIZE              24	/* Connected, in-cluster messages */
 #define DIR_MSG_H_SIZE            32	/* Directly addressed messages */
@@ -473,40 +459,11 @@ static inline struct tipc_msg *msg_get_wrapped(struct tipc_msg *m)
 
 
 /*
-		TIPC internal message header format, version 2
-
-       1 0 9 8 7 6 5 4|3 2 1 0 9 8 7 6|5 4 3 2 1 0 9 8|7 6 5 4 3 2 1 0
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w0:|vers |msg usr|hdr sz |n|resrv|            packet size          |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w1:|m typ|      sequence gap       |       broadcast ack no        |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w2:| link level ack no/bc_gap_from |     seq no / bcast_gap_to     |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w3:|                       previous node                           |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w4:|  next sent broadcast/fragm no | next sent pkt/ fragm msg no   |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w5:|          session no           |rsv=0|r|berid|link prio|netpl|p|
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w6:|                      originating node                         |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w7:|                      destination node                         |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w8:|                   transport sequence number                   |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w9:|   msg count / bcast tag       |       link tolerance          |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-      \                                                               \
-      /                     User Specific Data                        /
-      \                                                               \
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-      NB: CONN_MANAGER use data message format. LINK_CONFIG has own format.
-*/
+ * Constants and routines used to read and write TIPC internal message headers
+ */
 
 /*
- * Internal users
+ * Internal message users
  */
 
 #define  BCAST_PROTOCOL       5
@@ -520,7 +477,7 @@ static inline struct tipc_msg *msg_get_wrapped(struct tipc_msg *m)
 #define  LINK_CONFIG          13
 
 /*
- *  Connection management protocol messages
+ *  Connection management protocol message types
  */
 
 #define CONN_PROBE        0
@@ -528,12 +485,41 @@ static inline struct tipc_msg *msg_get_wrapped(struct tipc_msg *m)
 #define CONN_ACK          2
 
 /*
- * Name distributor messages
+ * Name distributor message types
  */
 
 #define PUBLICATION       0
 #define WITHDRAWAL        1
 
+/*
+ * Segmentation message types
+ */
+
+#define FIRST_FRAGMENT		0
+#define FRAGMENT		1
+#define LAST_FRAGMENT		2
+
+/*
+ * Link management protocol message types
+ */
+
+#define STATE_MSG		0
+#define RESET_MSG		1
+#define ACTIVATE_MSG		2
+
+/*
+ * Changeover tunnel message types
+ */
+#define DUPLICATE_MSG		0
+#define ORIGINAL_MSG		1
+
+/*
+ * Config protocol message types
+ */
+
+#define DSC_REQ_MSG		0
+#define DSC_RESP_MSG		1
+
 
 /*
  * Word 1
@@ -761,50 +747,11 @@ static inline void msg_set_link_tolerance(struct tipc_msg *m, u32 n)
 	msg_set_bits(m, 9, 0, 0xffff, n);
 }
 
-/*
- * Segmentation message types
- */
-
-#define FIRST_FRAGMENT     0
-#define FRAGMENT           1
-#define LAST_FRAGMENT      2
-
-/*
- * Link management protocol message types
- */
-
-#define STATE_MSG       0
-#define RESET_MSG       1
-#define ACTIVATE_MSG    2
-
-/*
- * Changeover tunnel message types
- */
-#define DUPLICATE_MSG    0
-#define ORIGINAL_MSG     1
-
-/*
- * Routing table message types
- */
-#define EXT_ROUTING_TABLE    0
-#define LOCAL_ROUTING_TABLE  1		/* obsoleted */
-#define SLAVE_ROUTING_TABLE  2
-#define ROUTE_ADDITION       3
-#define ROUTE_REMOVAL        4
-
-/*
- * Config protocol message types
- */
-
-#define DSC_REQ_MSG          0
-#define DSC_RESP_MSG         1
-
 u32 tipc_msg_tot_importance(struct tipc_msg *m);
 void tipc_msg_init(struct tipc_msg *m, u32 user, u32 type,
 			    u32 hsize, u32 destnode);
-int tipc_msg_calc_data_size(struct iovec const *msg_sect, u32 num_sect);
-int tipc_msg_build(struct tipc_msg *hdr,
-			    struct iovec const *msg_sect, u32 num_sect,
+int tipc_msg_build(struct tipc_msg *hdr, struct iovec const *msg_sect,
+		   u32 num_sect, unsigned int total_len,
 			    int max_size, int usrmem, struct sk_buff **buf);
 
 static inline void msg_set_media_addr(struct tipc_msg *m, struct tipc_media_addr *a)
diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c
index c9fa6dfcf28..80025a1b3bf 100644
--- a/net/tipc/name_distr.c
+++ b/net/tipc/name_distr.c
@@ -160,7 +160,7 @@ void tipc_named_withdraw(struct publication *publ)
 
 	buf = named_prepare_buf(WITHDRAWAL, ITEM_SIZE, 0);
 	if (!buf) {
-		warn("Withdrawl distribution failure\n");
+		warn("Withdrawal distribution failure\n");
 		return;
 	}
 
diff --git a/net/tipc/port.c b/net/tipc/port.c
index 6ff78f9c7d6..c68dc956a42 100644
--- a/net/tipc/port.c
+++ b/net/tipc/port.c
@@ -74,7 +74,8 @@ static u32 port_peerport(struct tipc_port *p_ptr)
  */
 
 int tipc_multicast(u32 ref, struct tipc_name_seq const *seq,
-		   u32 num_sect, struct iovec const *msg_sect)
+		   u32 num_sect, struct iovec const *msg_sect,
+		   unsigned int total_len)
 {
 	struct tipc_msg *hdr;
 	struct sk_buff *buf;
@@ -91,11 +92,14 @@ int tipc_multicast(u32 ref, struct tipc_name_seq const *seq,
 
 	hdr = &oport->phdr;
 	msg_set_type(hdr, TIPC_MCAST_MSG);
+	msg_set_lookup_scope(hdr, TIPC_CLUSTER_SCOPE);
+	msg_set_destport(hdr, 0);
+	msg_set_destnode(hdr, 0);
 	msg_set_nametype(hdr, seq->type);
 	msg_set_namelower(hdr, seq->lower);
 	msg_set_nameupper(hdr, seq->upper);
 	msg_set_hdr_sz(hdr, MCAST_H_SIZE);
-	res = tipc_msg_build(hdr, msg_sect, num_sect, MAX_MSG_SIZE,
+	res = tipc_msg_build(hdr, msg_sect, num_sect, total_len, MAX_MSG_SIZE,
 			!oport->user_port, &buf);
 	if (unlikely(!buf))
 		return res;
@@ -161,6 +165,7 @@ void tipc_port_recv_mcast(struct sk_buff *buf, struct port_list *dp)
 	/* Deliver a copy of message to each destination port */
 
 	if (dp->count != 0) {
+		msg_set_destnode(msg, tipc_own_addr);
 		if (dp->count == 1) {
 			msg_set_destport(msg, dp->ports[0]);
 			tipc_port_recv_msg(buf);
@@ -414,12 +419,12 @@ int tipc_reject_msg(struct sk_buff *buf, u32 err)
 
 int tipc_port_reject_sections(struct tipc_port *p_ptr, struct tipc_msg *hdr,
 			      struct iovec const *msg_sect, u32 num_sect,
-			      int err)
+			      unsigned int total_len, int err)
 {
 	struct sk_buff *buf;
 	int res;
 
-	res = tipc_msg_build(hdr, msg_sect, num_sect, MAX_MSG_SIZE,
+	res = tipc_msg_build(hdr, msg_sect, num_sect, total_len, MAX_MSG_SIZE,
 			!p_ptr->user_port, &buf);
 	if (!buf)
 		return res;
@@ -1065,6 +1070,7 @@ int tipc_connect2port(u32 ref, struct tipc_portid const *peer)
 	msg_set_orignode(msg, tipc_own_addr);
 	msg_set_origport(msg, p_ptr->ref);
 	msg_set_type(msg, TIPC_CONN_MSG);
+	msg_set_lookup_scope(msg, 0);
 	msg_set_hdr_sz(msg, SHORT_H_SIZE);
 
 	p_ptr->probing_interval = PROBING_INTERVAL;
@@ -1158,12 +1164,13 @@ int tipc_shutdown(u32 ref)
  */
 
 static int tipc_port_recv_sections(struct tipc_port *sender, unsigned int num_sect,
-				   struct iovec const *msg_sect)
+				   struct iovec const *msg_sect,
+				   unsigned int total_len)
 {
 	struct sk_buff *buf;
 	int res;
 
-	res = tipc_msg_build(&sender->phdr, msg_sect, num_sect,
+	res = tipc_msg_build(&sender->phdr, msg_sect, num_sect, total_len,
 			MAX_MSG_SIZE, !sender->user_port, &buf);
 	if (likely(buf))
 		tipc_port_recv_msg(buf);
@@ -1174,7 +1181,8 @@ static int tipc_port_recv_sections(struct tipc_port *sender, unsigned int num_se
  * tipc_send - send message sections on connection
  */
 
-int tipc_send(u32 ref, unsigned int num_sect, struct iovec const *msg_sect)
+int tipc_send(u32 ref, unsigned int num_sect, struct iovec const *msg_sect,
+	      unsigned int total_len)
 {
 	struct tipc_port *p_ptr;
 	u32 destnode;
@@ -1189,9 +1197,10 @@ int tipc_send(u32 ref, unsigned int num_sect, struct iovec const *msg_sect)
 		destnode = port_peernode(p_ptr);
 		if (likely(destnode != tipc_own_addr))
 			res = tipc_link_send_sections_fast(p_ptr, msg_sect, num_sect,
-							   destnode);
+							   total_len, destnode);
 		else
-			res = tipc_port_recv_sections(p_ptr, num_sect, msg_sect);
+			res = tipc_port_recv_sections(p_ptr, num_sect, msg_sect,
+						      total_len);
 
 		if (likely(res != -ELINKCONG)) {
 			p_ptr->congested = 0;
@@ -1202,8 +1211,7 @@ int tipc_send(u32 ref, unsigned int num_sect, struct iovec const *msg_sect)
 	}
 	if (port_unreliable(p_ptr)) {
 		p_ptr->congested = 0;
-		/* Just calculate msg length and return */
-		return tipc_msg_calc_data_size(msg_sect, num_sect);
+		return total_len;
 	}
 	return -ELINKCONG;
 }
@@ -1213,7 +1221,8 @@ int tipc_send(u32 ref, unsigned int num_sect, struct iovec const *msg_sect)
  */
 
 int tipc_send2name(u32 ref, struct tipc_name const *name, unsigned int domain,
-	   unsigned int num_sect, struct iovec const *msg_sect)
+		   unsigned int num_sect, struct iovec const *msg_sect,
+		   unsigned int total_len)
 {
 	struct tipc_port *p_ptr;
 	struct tipc_msg *msg;
@@ -1240,23 +1249,23 @@ int tipc_send2name(u32 ref, struct tipc_name const *name, unsigned int domain,
 	if (likely(destport)) {
 		if (likely(destnode == tipc_own_addr))
 			res = tipc_port_recv_sections(p_ptr, num_sect,
-						      msg_sect);
+						      msg_sect, total_len);
 		else
 			res = tipc_link_send_sections_fast(p_ptr, msg_sect,
-							   num_sect, destnode);
+							   num_sect, total_len,
+							   destnode);
 		if (likely(res != -ELINKCONG)) {
 			if (res > 0)
 				p_ptr->sent++;
 			return res;
 		}
 		if (port_unreliable(p_ptr)) {
-			/* Just calculate msg length and return */
-			return tipc_msg_calc_data_size(msg_sect, num_sect);
+			return total_len;
 		}
 		return -ELINKCONG;
 	}
 	return tipc_port_reject_sections(p_ptr, msg, msg_sect, num_sect,
-					 TIPC_ERR_NO_NAME);
+					 total_len, TIPC_ERR_NO_NAME);
 }
 
 /**
@@ -1264,7 +1273,8 @@ int tipc_send2name(u32 ref, struct tipc_name const *name, unsigned int domain,
  */
 
 int tipc_send2port(u32 ref, struct tipc_portid const *dest,
-	   unsigned int num_sect, struct iovec const *msg_sect)
+		   unsigned int num_sect, struct iovec const *msg_sect,
+		   unsigned int total_len)
 {
 	struct tipc_port *p_ptr;
 	struct tipc_msg *msg;
@@ -1276,6 +1286,7 @@ int tipc_send2port(u32 ref, struct tipc_portid const *dest,
 
 	msg = &p_ptr->phdr;
 	msg_set_type(msg, TIPC_DIRECT_MSG);
+	msg_set_lookup_scope(msg, 0);
 	msg_set_orignode(msg, tipc_own_addr);
 	msg_set_origport(msg, ref);
 	msg_set_destnode(msg, dest->node);
@@ -1283,18 +1294,18 @@ int tipc_send2port(u32 ref, struct tipc_portid const *dest,
 	msg_set_hdr_sz(msg, DIR_MSG_H_SIZE);
 
 	if (dest->node == tipc_own_addr)
-		res =  tipc_port_recv_sections(p_ptr, num_sect, msg_sect);
+		res =  tipc_port_recv_sections(p_ptr, num_sect, msg_sect,
+					       total_len);
 	else
 		res = tipc_link_send_sections_fast(p_ptr, msg_sect, num_sect,
-						   dest->node);
+						   total_len, dest->node);
 	if (likely(res != -ELINKCONG)) {
 		if (res > 0)
 			p_ptr->sent++;
 		return res;
 	}
 	if (port_unreliable(p_ptr)) {
-		/* Just calculate msg length and return */
-		return tipc_msg_calc_data_size(msg_sect, num_sect);
+		return total_len;
 	}
 	return -ELINKCONG;
 }
diff --git a/net/tipc/port.h b/net/tipc/port.h
index 87b9424ae0e..b9aa34195ae 100644
--- a/net/tipc/port.h
+++ b/net/tipc/port.h
@@ -205,23 +205,27 @@ int tipc_disconnect_port(struct tipc_port *tp_ptr);
 /*
  * TIPC messaging routines
  */
-int tipc_send(u32 portref, unsigned int num_sect, struct iovec const *msg_sect);
+int tipc_send(u32 portref, unsigned int num_sect, struct iovec const *msg_sect,
+	      unsigned int total_len);
 
 int tipc_send2name(u32 portref, struct tipc_name const *name, u32 domain,
-		unsigned int num_sect, struct iovec const *msg_sect);
+		   unsigned int num_sect, struct iovec const *msg_sect,
+		   unsigned int total_len);
 
 int tipc_send2port(u32 portref, struct tipc_portid const *dest,
-		unsigned int num_sect, struct iovec const *msg_sect);
+		   unsigned int num_sect, struct iovec const *msg_sect,
+		   unsigned int total_len);
 
 int tipc_send_buf2port(u32 portref, struct tipc_portid const *dest,
 		struct sk_buff *buf, unsigned int dsz);
 
 int tipc_multicast(u32 portref, struct tipc_name_seq const *seq,
-		unsigned int section_count, struct iovec const *msg);
+		   unsigned int section_count, struct iovec const *msg,
+		   unsigned int total_len);
 
 int tipc_port_reject_sections(struct tipc_port *p_ptr, struct tipc_msg *hdr,
 			      struct iovec const *msg_sect, u32 num_sect,
-			      int err);
+			      unsigned int total_len, int err);
 struct sk_buff *tipc_port_get_ports(void);
 void tipc_port_recv_proto_msg(struct sk_buff *buf);
 void tipc_port_recv_mcast(struct sk_buff *buf, struct port_list *dp);
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 29d94d53198..33883739664 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -535,6 +535,9 @@ static int send_msg(struct kiocb *iocb, struct socket *sock,
 	if (unlikely((m->msg_namelen < sizeof(*dest)) ||
 		     (dest->family != AF_TIPC)))
 		return -EINVAL;
+	if ((total_len > TIPC_MAX_USER_MSG_SIZE) ||
+	    (m->msg_iovlen > (unsigned)INT_MAX))
+		return -EMSGSIZE;
 
 	if (iocb)
 		lock_sock(sk);
@@ -573,12 +576,14 @@ static int send_msg(struct kiocb *iocb, struct socket *sock,
 					     &dest->addr.name.name,
 					     dest->addr.name.domain,
 					     m->msg_iovlen,
-					     m->msg_iov);
+					     m->msg_iov,
+					     total_len);
 		} else if (dest->addrtype == TIPC_ADDR_ID) {
 			res = tipc_send2port(tport->ref,
 					     &dest->addr.id,
 					     m->msg_iovlen,
-					     m->msg_iov);
+					     m->msg_iov,
+					     total_len);
 		} else if (dest->addrtype == TIPC_ADDR_MCAST) {
 			if (needs_conn) {
 				res = -EOPNOTSUPP;
@@ -590,7 +595,8 @@ static int send_msg(struct kiocb *iocb, struct socket *sock,
 			res = tipc_multicast(tport->ref,
 					     &dest->addr.nameseq,
 					     m->msg_iovlen,
-					     m->msg_iov);
+					     m->msg_iov,
+					     total_len);
 		}
 		if (likely(res != -ELINKCONG)) {
 			if (needs_conn && (res >= 0))
@@ -640,6 +646,10 @@ static int send_packet(struct kiocb *iocb, struct socket *sock,
 	if (unlikely(dest))
 		return send_msg(iocb, sock, m, total_len);
 
+	if ((total_len > TIPC_MAX_USER_MSG_SIZE) ||
+	    (m->msg_iovlen > (unsigned)INT_MAX))
+		return -EMSGSIZE;
+
 	if (iocb)
 		lock_sock(sk);
 
@@ -652,7 +662,8 @@ static int send_packet(struct kiocb *iocb, struct socket *sock,
 			break;
 		}
 
-		res = tipc_send(tport->ref, m->msg_iovlen, m->msg_iov);
+		res = tipc_send(tport->ref, m->msg_iovlen, m->msg_iov,
+				total_len);
 		if (likely(res != -ELINKCONG))
 			break;
 		if (m->msg_flags & MSG_DONTWAIT) {
@@ -723,6 +734,12 @@ static int send_stream(struct kiocb *iocb, struct socket *sock,
 		goto exit;
 	}
 
+	if ((total_len > (unsigned)INT_MAX) ||
+	    (m->msg_iovlen > (unsigned)INT_MAX)) {
+		res = -EMSGSIZE;
+		goto exit;
+	}
+
 	/*
 	 * Send each iovec entry using one or more messages
 	 *
@@ -753,7 +770,7 @@ static int send_stream(struct kiocb *iocb, struct socket *sock,
 				bytes_to_send = curr_left;
 			my_iov.iov_base = curr_start;
 			my_iov.iov_len = bytes_to_send;
-			res = send_packet(NULL, sock, &my_msg, 0);
+			res = send_packet(NULL, sock, &my_msg, bytes_to_send);
 			if (res < 0) {
 				if (bytes_sent)
 					res = bytes_sent;
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index aae9eae1340..6cf72686348 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -109,7 +109,7 @@ static void subscr_send_event(struct subscription *sub,
 	sub->evt.found_upper = htohl(found_upper, sub->swap);
 	sub->evt.port.ref = htohl(port_ref, sub->swap);
 	sub->evt.port.node = htohl(node, sub->swap);
-	tipc_send(sub->server_ref, 1, &msg_sect);
+	tipc_send(sub->server_ref, 1, &msg_sect, msg_sect.iov_len);
 }
 
 /**
@@ -521,7 +521,7 @@ static void subscr_named_msg_event(void *usr_handle,
 
 	/* Send an ACK- to complete connection handshaking */
 
-	tipc_send(server_port_ref, 0, NULL);
+	tipc_send(server_port_ref, 0, NULL, 0);
 
 	/* Handle optional subscription request */
 
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 1663e1a2efd..b1d75beb7e2 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -207,7 +207,7 @@ static int unix_mkname(struct sockaddr_un *sunaddr, int len, unsigned *hashp)
 		/*
 		 * This may look like an off by one error but it is a bit more
 		 * subtle. 108 is the longest valid AF_UNIX path for a binding.
-		 * sun_path[108] doesnt as such exist.  However in kernel space
+		 * sun_path[108] doesn't as such exist.  However in kernel space
 		 * we are guaranteed that it is a valid memory location in our
 		 * kernel address buffer.
 		 */
@@ -524,6 +524,8 @@ static int unix_dgram_connect(struct socket *, struct sockaddr *,
 			      int, int);
 static int unix_seqpacket_sendmsg(struct kiocb *, struct socket *,
 				  struct msghdr *, size_t);
+static int unix_seqpacket_recvmsg(struct kiocb *, struct socket *,
+				  struct msghdr *, size_t, int);
 
 static const struct proto_ops unix_stream_ops = {
 	.family =	PF_UNIX,
@@ -583,7 +585,7 @@ static const struct proto_ops unix_seqpacket_ops = {
 	.setsockopt =	sock_no_setsockopt,
 	.getsockopt =	sock_no_getsockopt,
 	.sendmsg =	unix_seqpacket_sendmsg,
-	.recvmsg =	unix_dgram_recvmsg,
+	.recvmsg =	unix_seqpacket_recvmsg,
 	.mmap =		sock_no_mmap,
 	.sendpage =	sock_no_sendpage,
 };
@@ -1699,6 +1701,18 @@ static int unix_seqpacket_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	return unix_dgram_sendmsg(kiocb, sock, msg, len);
 }
 
+static int unix_seqpacket_recvmsg(struct kiocb *iocb, struct socket *sock,
+			      struct msghdr *msg, size_t size,
+			      int flags)
+{
+	struct sock *sk = sock->sk;
+
+	if (sk->sk_state != TCP_ESTABLISHED)
+		return -ENOTCONN;
+
+	return unix_dgram_recvmsg(iocb, sock, msg, size, flags);
+}
+
 static void unix_copy_addr(struct msghdr *msg, struct sock *sk)
 {
 	struct unix_sock *u = unix_sk(sk);
diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c
index 11f25c7a7a0..f346395314b 100644
--- a/net/wanrouter/wanproc.c
+++ b/net/wanrouter/wanproc.c
@@ -51,7 +51,7 @@
 
 /*
  *	Structures for interfacing with the /proc filesystem.
- *	Router creates its own directory /proc/net/router with the folowing
+ *	Router creates its own directory /proc/net/router with the following
  *	entries:
  *	config		device configuration
  *	status		global device statistics
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 798cb4cd070..1ad0f39fe09 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -810,7 +810,7 @@ static void handle_channel(struct wiphy *wiphy,
 	if (r) {
 		/*
 		 * We will disable all channels that do not match our
-		 * recieved regulatory rule unless the hint is coming
+		 * received regulatory rule unless the hint is coming
 		 * from a Country IE and the Country IE had no information
 		 * about a band. The IEEE 802.11 spec allows for an AP
 		 * to send only a subset of the regulatory rules allowed,
@@ -839,7 +839,7 @@ static void handle_channel(struct wiphy *wiphy,
 	    request_wiphy && request_wiphy == wiphy &&
 	    request_wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) {
 		/*
-		 * This gaurantees the driver's requested regulatory domain
+		 * This guarantees the driver's requested regulatory domain
 		 * will always be used as a base for further regulatory
 		 * settings
 		 */
diff --git a/net/x25/x25_facilities.c b/net/x25/x25_facilities.c
index 406207515b5..f77e4e75f91 100644
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -31,7 +31,7 @@
  * x25_parse_facilities - Parse facilities from skb into the facilities structs
  *
  * @skb: sk_buff to parse
- * @facilities: Regular facilites, updated as facilities are found
+ * @facilities: Regular facilities, updated as facilities are found
  * @dte_facs: ITU DTE facilities, updated as DTE facilities are found
  * @vc_fac_mask: mask is updated with all facilities found
  *
diff --git a/net/x25/x25_forward.c b/net/x25/x25_forward.c
index 25a81079396..c541b622ae1 100644
--- a/net/x25/x25_forward.c
+++ b/net/x25/x25_forward.c
@@ -31,7 +31,7 @@ int x25_forward_call(struct x25_address *dest_addr, struct x25_neigh *from,
 		goto out_no_route;
 
 	if ((neigh_new = x25_get_neigh(rt->dev)) == NULL) {
-		/* This shouldnt happen, if it occurs somehow
+		/* This shouldn't happen, if it occurs somehow
 		 * do something sensible
 		 */
 		goto out_put_route;
@@ -45,7 +45,7 @@ int x25_forward_call(struct x25_address *dest_addr, struct x25_neigh *from,
 	}
 
 	/* Remote end sending a call request on an already
-	 * established LCI? It shouldnt happen, just in case..
+	 * established LCI? It shouldn't happen, just in case..
 	 */
 	read_lock_bh(&x25_forward_list_lock);
 	list_for_each(entry, &x25_forward_list) {
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 15792d8b627..9bec2e8a838 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1348,7 +1348,8 @@ static inline struct xfrm_dst *xfrm_alloc_dst(struct net *net, int family)
 	default:
 		BUG();
 	}
-	xdst = dst_alloc(dst_ops, 0);
+	xdst = dst_alloc(dst_ops, NULL, 0, 0, 0);
+	memset(&xdst->u.rt6.rt6i_table, 0, sizeof(*xdst) - sizeof(struct dst_entry));
 	xfrm_policy_put_afinfo(afinfo);
 
 	if (likely(xdst))
@@ -1406,6 +1407,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy,
 	struct net *net = xp_net(policy);
 	unsigned long now = jiffies;
 	struct net_device *dev;
+	struct xfrm_mode *inner_mode;
 	struct dst_entry *dst_prev = NULL;
 	struct dst_entry *dst0 = NULL;
 	int i = 0;
@@ -1436,6 +1438,17 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy,
 			goto put_states;
 		}
 
+		if (xfrm[i]->sel.family == AF_UNSPEC) {
+			inner_mode = xfrm_ip2inner_mode(xfrm[i],
+							xfrm_af2proto(family));
+			if (!inner_mode) {
+				err = -EAFNOSUPPORT;
+				dst_release(dst);
+				goto put_states;
+			}
+		} else
+			inner_mode = xfrm[i]->inner_mode;
+
 		if (!dst_prev)
 			dst0 = dst1;
 		else {
@@ -1464,7 +1477,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy,
 		dst1->lastuse = now;
 
 		dst1->input = dst_discard;
-		dst1->output = xfrm[i]->outer_mode->afinfo->output;
+		dst1->output = inner_mode->afinfo->output;
 
 		dst1->next = dst_prev;
 		dst_prev = dst1;
diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index f218385950c..47f1b8638df 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -532,9 +532,12 @@ int xfrm_init_replay(struct xfrm_state *x)
 
 	if (replay_esn) {
 		if (replay_esn->replay_window >
-		    replay_esn->bmp_len * sizeof(__u32))
+		    replay_esn->bmp_len * sizeof(__u32) * 8)
 			return -EINVAL;
 
+	if ((x->props.flags & XFRM_STATE_ESN) && replay_esn->replay_window == 0)
+		return -EINVAL;
+
 	if ((x->props.flags & XFRM_STATE_ESN) && x->replay_esn)
 		x->repl = &xfrm_replay_esn;
 	else
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index dd78536d40d..d70f85eb786 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1036,15 +1036,15 @@ static struct xfrm_state *__find_acq_core(struct net *net, struct xfrm_mark *m,
 
 		case AF_INET6:
 			ipv6_addr_copy((struct in6_addr *)x->sel.daddr.a6,
-				       (struct in6_addr *)daddr);
+				       (const struct in6_addr *)daddr);
 			ipv6_addr_copy((struct in6_addr *)x->sel.saddr.a6,
-				       (struct in6_addr *)saddr);
+				       (const struct in6_addr *)saddr);
 			x->sel.prefixlen_d = 128;
 			x->sel.prefixlen_s = 128;
 			ipv6_addr_copy((struct in6_addr *)x->props.saddr.a6,
-				       (struct in6_addr *)saddr);
+				       (const struct in6_addr *)saddr);
 			ipv6_addr_copy((struct in6_addr *)x->id.daddr.a6,
-				       (struct in6_addr *)daddr);
+				       (const struct in6_addr *)daddr);
 			break;
 		}
 
@@ -2092,8 +2092,8 @@ static void xfrm_audit_helper_sainfo(struct xfrm_state *x,
 static void xfrm_audit_helper_pktinfo(struct sk_buff *skb, u16 family,
 				      struct audit_buffer *audit_buf)
 {
-	struct iphdr *iph4;
-	struct ipv6hdr *iph6;
+	const struct iphdr *iph4;
+	const struct ipv6hdr *iph6;
 
 	switch (family) {
 	case AF_INET:
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 3d15d3e1b2c..c658cb3bc7c 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -124,6 +124,9 @@ static inline int verify_replay(struct xfrm_usersa_info *p,
 {
 	struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL];
 
+	if ((p->flags & XFRM_STATE_ESN) && !rt)
+		return -EINVAL;
+
 	if (!rt)
 		return 0;
 
@@ -894,7 +897,7 @@ static int build_spdinfo(struct sk_buff *skb, struct net *net,
 	u32 *f;
 
 	nlh = nlmsg_put(skb, pid, seq, XFRM_MSG_NEWSPDINFO, sizeof(u32), 0);
-	if (nlh == NULL) /* shouldnt really happen ... */
+	if (nlh == NULL) /* shouldn't really happen ... */
 		return -EMSGSIZE;
 
 	f = nlmsg_data(nlh);
@@ -954,7 +957,7 @@ static int build_sadinfo(struct sk_buff *skb, struct net *net,
 	u32 *f;
 
 	nlh = nlmsg_put(skb, pid, seq, XFRM_MSG_NEWSADINFO, sizeof(u32), 0);
-	if (nlh == NULL) /* shouldnt really happen ... */
+	if (nlh == NULL) /* shouldn't really happen ... */
 		return -EMSGSIZE;
 
 	f = nlmsg_data(nlh);
@@ -1361,7 +1364,7 @@ static int xfrm_add_policy(struct sk_buff *skb, struct nlmsghdr *nlh,
 	if (!xp)
 		return err;
 
-	/* shouldnt excl be based on nlh flags??
+	/* shouldn't excl be based on nlh flags??
 	 * Aha! this is anti-netlink really i.e  more pfkey derived
 	 * in netlink excl is a flag and you wouldnt need
 	 * a type XFRM_MSG_UPDPOLICY - JHS */
diff --git a/samples/Kconfig b/samples/Kconfig
index e03cf0e374d..41063e7592d 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -55,7 +55,7 @@ config SAMPLE_KFIFO
 	  If in doubt, say "N" here.
 
 config SAMPLE_KDB
-	tristate "Build kdb command exmaple -- loadable modules only"
+	tristate "Build kdb command example -- loadable modules only"
 	depends on KGDB_KDB && m
 	help
 	  Build an example of how to dynamically add the hello
diff --git a/samples/hw_breakpoint/data_breakpoint.c b/samples/hw_breakpoint/data_breakpoint.c
index bd0f337afca..063653955f9 100644
--- a/samples/hw_breakpoint/data_breakpoint.c
+++ b/samples/hw_breakpoint/data_breakpoint.c
@@ -19,7 +19,7 @@
  *
  * This file is a kernel module that places a breakpoint over ksym_name kernel
  * variable using Hardware Breakpoint register. The corresponding handler which
- * prints a backtrace is invoked everytime a write operation is performed on
+ * prints a backtrace is invoked every time a write operation is performed on
  * that variable.
  *
  * Copyright (C) IBM Corporation, 2009
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index d5f925abe4d..6165622c3e2 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -244,14 +244,19 @@ endif
 
 ifdef CONFIG_FTRACE_MCOUNT_RECORD
 ifdef BUILD_C_RECORDMCOUNT
+ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
+  RECORDMCOUNT_FLAGS = -w
+endif
 # Due to recursion, we must skip empty.o.
 # The empty.o file is created in the make process in order to determine
 #  the target endianness and word size. It is made before all other C
 #  files, including recordmcount.
 sub_cmd_record_mcount =					\
 	if [ $(@) != "scripts/mod/empty.o" ]; then	\
-		$(objtree)/scripts/recordmcount "$(@)";	\
+		$(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)";	\
 	fi;
+recordmcount_source := $(srctree)/scripts/recordmcount.c \
+		    $(srctree)/scripts/recordmcount.h
 else
 sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
 	"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
@@ -259,6 +264,7 @@ sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH
 	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
 	"$(LD)" "$(NM)" "$(RM)" "$(MV)" \
 	"$(if $(part-of-module),1,0)" "$(@)";
+recordmcount_source := $(srctree)/scripts/recordmcount.pl
 endif
 cmd_record_mcount = 						\
 	if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then	\
@@ -279,13 +285,13 @@ define rule_cc_o_c
 endef
 
 # Built-in and composite module parts
-$(obj)/%.o: $(src)/%.c FORCE
+$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
 	$(call cmd,force_checksrc)
 	$(call if_changed_rule,cc_o_c)
 
 # Single-part modules are special since we need to mark them in $(MODVERDIR)
 
-$(single-used-m): $(obj)/%.o: $(src)/%.c FORCE
+$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
 	$(call cmd,force_checksrc)
 	$(call if_changed_rule,cc_o_c)
 	@{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 7d22056582c..56dfafc73c1 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -35,14 +35,14 @@
 # KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
 # symbols in the final module linking stage
 # KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
-# This is solely usefull to speed up test compiles
+# This is solely useful to speed up test compiles
 PHONY := _modpost
 _modpost: __modpost
 
 include include/config/auto.conf
 include scripts/Kbuild.include
 
-# When building external modules load the Kbuild file to retreive EXTRA_SYMBOLS info
+# When building external modules load the Kbuild file to retrieve EXTRA_SYMBOLS info
 ifneq ($(KBUILD_EXTMOD),)
 
 # set src + obj - they may be used when building the .mod.c file
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 8f9e394298c..d8670810db6 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1946,13 +1946,13 @@ sub process {
 # printk should use KERN_* levels.  Note that follow on printk's on the
 # same line do not need a level, so we use the current block context
 # to try and find and validate the current printk.  In summary the current
-# printk includes all preceeding printk's which have no newline on the end.
+# printk includes all preceding printk's which have no newline on the end.
 # we assume the first bad printk is the one to report.
 		if ($line =~ /\bprintk\((?!KERN_)\s*"/) {
 			my $ok = 0;
 			for (my $ln = $linenr - 1; $ln >= $first_line; $ln--) {
 				#print "CHECK<$lines[$ln - 1]\n";
-				# we have a preceeding printk if it ends
+				# we have a preceding printk if it ends
 				# with "\n" ignore it, else it is to blame
 				if ($lines[$ln - 1] =~ m{\bprintk\(}) {
 					if ($rawlines[$ln - 1] !~ m{\\n"}) {
@@ -2044,7 +2044,7 @@ sub process {
 			for (my $n = 0; $n < $#elements; $n += 2) {
 				$off += length($elements[$n]);
 
-				# Pick up the preceeding and succeeding characters.
+				# Pick up the preceding and succeeding characters.
 				my $ca = substr($opline, 0, $off);
 				my $cc = '';
 				if (length($opline) >= ($off + length($elements[$n + 1]))) {
diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h
index ce80e4fb41b..ff6246f000c 100644
--- a/scripts/dtc/libfdt/libfdt.h
+++ b/scripts/dtc/libfdt/libfdt.h
@@ -61,7 +61,7 @@
 #define FDT_ERR_NOTFOUND	1
 	/* FDT_ERR_NOTFOUND: The requested node or property does not exist */
 #define FDT_ERR_EXISTS		2
-	/* FDT_ERR_EXISTS: Attemped to create a node or property which
+	/* FDT_ERR_EXISTS: Attempted to create a node or property which
 	 * already exists */
 #define FDT_ERR_NOSPACE		3
 	/* FDT_ERR_NOSPACE: Operation needed to expand the device
diff --git a/scripts/dtc/livetree.c b/scripts/dtc/livetree.c
index c9209d5c999..26d0e1e60c0 100644
--- a/scripts/dtc/livetree.c
+++ b/scripts/dtc/livetree.c
@@ -155,7 +155,7 @@ struct node *merge_nodes(struct node *old_node, struct node *new_node)
 			}
 		}
 
-		/* if no collision occured, add child to the old node. */
+		/* if no collision occurred, add child to the old node. */
 		if (new_child)
 			add_child(old_node, new_child);
 	}
diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh
index 55caecdad99..e12b1a7525c 100644
--- a/scripts/gen_initramfs_list.sh
+++ b/scripts/gen_initramfs_list.sh
@@ -284,7 +284,7 @@ while [ $# -gt 0 ]; do
 done
 
 # If output_file is set we will generate cpio archive and compress it
-# we are carefull to delete tmp files
+# we are careful to delete tmp files
 if [ ! -z ${output_file} ]; then
 	if [ -z ${cpio_file} ]; then
 		cpio_tfile="$(mktemp ${TMPDIR:-/tmp}/cpiofile.XXXXXX)"
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 659326c3e89..006ad817cd5 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -332,7 +332,7 @@ static int conf_choice(struct menu *menu)
 		}
 		if (!child)
 			continue;
-		if (line[strlen(line) - 1] == '?') {
+		if (line[0] && line[strlen(line) - 1] == '?') {
 			print_help(child);
 			continue;
 		}
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 9f85012acf0..d793001929c 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1705,7 +1705,7 @@ sub push_parameter($$$) {
 
 	$param = xml_escape($param);
 
-	# strip spaces from $param so that it is one continous string
+	# strip spaces from $param so that it is one continuous string
 	# on @parameterlist;
 	# this fixes a problem where check_sections() cannot find
 	# a parameter like "addr[6 + 2]" because it actually appears
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index cd104afcc5f..413c53693e6 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -420,11 +420,10 @@ static int parse_elf(struct elf_info *info, const char *filename)
 		return 0;
 	}
 
-	if (hdr->e_shnum == 0) {
+	if (hdr->e_shnum == SHN_UNDEF) {
 		/*
 		 * There are more than 64k sections,
 		 * read count from .sh_size.
-		 * note: it doesn't need shndx2secindex()
 		 */
 		info->num_sections = TO_NATIVE(sechdrs[0].sh_size);
 	}
@@ -432,8 +431,7 @@ static int parse_elf(struct elf_info *info, const char *filename)
 		info->num_sections = hdr->e_shnum;
 	}
 	if (hdr->e_shstrndx == SHN_XINDEX) {
-		info->secindex_strings =
-		    shndx2secindex(TO_NATIVE(sechdrs[0].sh_link));
+		info->secindex_strings = TO_NATIVE(sechdrs[0].sh_link);
 	}
 	else {
 		info->secindex_strings = hdr->e_shstrndx;
@@ -489,7 +487,7 @@ static int parse_elf(struct elf_info *info, const char *filename)
 			    sechdrs[i].sh_offset;
 			info->symtab_stop  = (void *)hdr +
 			    sechdrs[i].sh_offset + sechdrs[i].sh_size;
-			sh_link_idx = shndx2secindex(sechdrs[i].sh_link);
+			sh_link_idx = sechdrs[i].sh_link;
 			info->strtab       = (void *)hdr +
 			    sechdrs[sh_link_idx].sh_offset;
 		}
@@ -516,11 +514,9 @@ static int parse_elf(struct elf_info *info, const char *filename)
 
 	if (symtab_shndx_idx != ~0U) {
 		Elf32_Word *p;
-		if (symtab_idx !=
-		    shndx2secindex(sechdrs[symtab_shndx_idx].sh_link))
+		if (symtab_idx != sechdrs[symtab_shndx_idx].sh_link)
 			fatal("%s: SYMTAB_SHNDX has bad sh_link: %u!=%u\n",
-			      filename,
-			      shndx2secindex(sechdrs[symtab_shndx_idx].sh_link),
+			      filename, sechdrs[symtab_shndx_idx].sh_link,
 			      symtab_idx);
 		/* Fix endianness */
 		for (p = info->symtab_shndx_start; p < info->symtab_shndx_stop;
@@ -1446,7 +1442,7 @@ static unsigned int *reloc_location(struct elf_info *elf,
 				    Elf_Shdr *sechdr, Elf_Rela *r)
 {
 	Elf_Shdr *sechdrs = elf->sechdrs;
-	int section = shndx2secindex(sechdr->sh_info);
+	int section = sechdr->sh_info;
 
 	return (void *)elf->hdr + sechdrs[section].sh_offset +
 		r->r_offset;
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index 0388cfccac8..2031119080d 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -145,33 +145,22 @@ static inline int is_shndx_special(unsigned int i)
 	return i != SHN_XINDEX && i >= SHN_LORESERVE && i <= SHN_HIRESERVE;
 }
 
-/* shndx is in [0..SHN_LORESERVE) U (SHN_HIRESERVE, 0xfffffff], thus:
- * shndx == 0               <=> sechdrs[0]
- * ......
- * shndx == SHN_LORESERVE-1 <=> sechdrs[SHN_LORESERVE-1]
- * shndx == SHN_HIRESERVE+1 <=> sechdrs[SHN_LORESERVE]
- * shndx == SHN_HIRESERVE+2 <=> sechdrs[SHN_LORESERVE+1]
- * ......
- * fyi: sym->st_shndx is uint16, SHN_LORESERVE = ff00, SHN_HIRESERVE = ffff,
- * so basically we map  0000..feff -> 0000..feff
- *                      ff00..ffff -> (you are a bad boy, dont do it)
- *                     10000..xxxx -> ff00..(xxxx-0x100)
+/*
+ * Move reserved section indices SHN_LORESERVE..SHN_HIRESERVE out of
+ * the way to -256..-1, to avoid conflicting with real section
+ * indices.
  */
-static inline unsigned int shndx2secindex(unsigned int i)
-{
-	if (i <= SHN_HIRESERVE)
-		return i;
-	return i - (SHN_HIRESERVE + 1 - SHN_LORESERVE);
-}
+#define SPECIAL(i) ((i) - (SHN_HIRESERVE + 1))
 
 /* Accessor for sym->st_shndx, hides ugliness of "64k sections" */
 static inline unsigned int get_secindex(const struct elf_info *info,
 					const Elf_Sym *sym)
 {
+	if (is_shndx_special(sym->st_shndx))
+		return SPECIAL(sym->st_shndx);
 	if (sym->st_shndx != SHN_XINDEX)
 		return sym->st_shndx;
-	return shndx2secindex(info->symtab_shndx_start[sym -
-						       info->symtab_start]);
+	return info->symtab_shndx_start[sym - info->symtab_start];
 }
 
 /* file2alias.c */
diff --git a/scripts/module-common.lds b/scripts/module-common.lds
index 47a1f9ae0ed..0865b3e752b 100644
--- a/scripts/module-common.lds
+++ b/scripts/module-common.lds
@@ -5,4 +5,15 @@
  */
 SECTIONS {
 	/DISCARD/ : { *(.discard) }
+
+	__ksymtab		: { *(SORT(___ksymtab+*)) }
+	__ksymtab_gpl		: { *(SORT(___ksymtab_gpl+*)) }
+	__ksymtab_unused	: { *(SORT(___ksymtab_unused+*)) }
+	__ksymtab_unused_gpl	: { *(SORT(___ksymtab_unused_gpl+*)) }
+	__ksymtab_gpl_future	: { *(SORT(___ksymtab_gpl_future+*)) }
+	__kcrctab		: { *(SORT(___kcrctab+*)) }
+	__kcrctab_gpl		: { *(SORT(___kcrctab_gpl+*)) }
+	__kcrctab_unused	: { *(SORT(___kcrctab_unused+*)) }
+	__kcrctab_unused_gpl	: { *(SORT(___kcrctab_unused_gpl+*)) }
+	__kcrctab_gpl_future	: { *(SORT(___kcrctab_gpl_future+*)) }
 }
diff --git a/scripts/package/buildtar b/scripts/package/buildtar
index 83c9c04102f..8a7b15598ea 100644
--- a/scripts/package/buildtar
+++ b/scripts/package/buildtar
@@ -92,7 +92,7 @@ case "${ARCH}" in
 		echo "" >&2
 		echo '** ** **  WARNING  ** ** **' >&2
 		echo "" >&2
-		echo "Your architecture did not define any architecture-dependant files" >&2
+		echo "Your architecture did not define any architecture-dependent files" >&2
 		echo "to be placed into the tarball. Please add those to ${0} ..." >&2
 		echo "" >&2
 		sleep 5
diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c
index f9f6f52db77..ee52cb8e17a 100644
--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -24,6 +24,7 @@
 #include <sys/types.h>
 #include <sys/mman.h>
 #include <sys/stat.h>
+#include <getopt.h>
 #include <elf.h>
 #include <fcntl.h>
 #include <setjmp.h>
@@ -39,6 +40,7 @@ static char gpfx;	/* prefix for global symbol name (sometimes '_') */
 static struct stat sb;	/* Remember .st_size, etc. */
 static jmp_buf jmpenv;	/* setjmp/longjmp per-file error escape */
 static const char *altmcount;	/* alternate mcount symbol name */
+static int warn_on_notrace_sect; /* warn when section has mcount not being recorded */
 
 /* setjmp() return values */
 enum {
@@ -78,7 +80,7 @@ static off_t
 ulseek(int const fd, off_t const offset, int const whence)
 {
 	off_t const w = lseek(fd, offset, whence);
-	if ((off_t)-1 == w) {
+	if (w == (off_t)-1) {
 		perror("lseek");
 		fail_file();
 	}
@@ -111,13 +113,41 @@ static void *
 umalloc(size_t size)
 {
 	void *const addr = malloc(size);
-	if (0 == addr) {
+	if (addr == 0) {
 		fprintf(stderr, "malloc failed: %zu bytes\n", size);
 		fail_file();
 	}
 	return addr;
 }
 
+static unsigned char ideal_nop5_x86_64[5] = { 0x0f, 0x1f, 0x44, 0x00, 0x00 };
+static unsigned char ideal_nop5_x86_32[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
+static unsigned char *ideal_nop;
+
+static char rel_type_nop;
+
+static int (*make_nop)(void *map, size_t const offset);
+
+static int make_nop_x86(void *map, size_t const offset)
+{
+	uint32_t *ptr;
+	unsigned char *op;
+
+	/* Confirm we have 0xe8 0x0 0x0 0x0 0x0 */
+	ptr = map + offset;
+	if (*ptr != 0)
+		return -1;
+
+	op = map + offset - 1;
+	if (*op != 0xe8)
+		return -1;
+
+	/* convert to nop */
+	ulseek(fd_map, offset - 1, SEEK_SET);
+	uwrite(fd_map, ideal_nop, 5);
+	return 0;
+}
+
 /*
  * Get the whole file as a programming convenience in order to avoid
  * malloc+lseek+read+free of many pieces.  If successful, then mmap
@@ -136,7 +166,7 @@ static void *mmap_file(char const *fname)
 	void *addr;
 
 	fd_map = open(fname, O_RDWR);
-	if (0 > fd_map || 0 > fstat(fd_map, &sb)) {
+	if (fd_map < 0 || fstat(fd_map, &sb) < 0) {
 		perror(fname);
 		fail_file();
 	}
@@ -147,7 +177,7 @@ static void *mmap_file(char const *fname)
 	addr = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE,
 		    fd_map, 0);
 	mmap_failed = 0;
-	if (MAP_FAILED == addr) {
+	if (addr == MAP_FAILED) {
 		mmap_failed = 1;
 		addr = umalloc(sb.st_size);
 		uread(fd_map, addr, sb.st_size);
@@ -206,12 +236,13 @@ static uint32_t (*w2)(uint16_t);
 static int
 is_mcounted_section_name(char const *const txtname)
 {
-	return 0 == strcmp(".text",           txtname) ||
-		0 == strcmp(".ref.text",      txtname) ||
-		0 == strcmp(".sched.text",    txtname) ||
-		0 == strcmp(".spinlock.text", txtname) ||
-		0 == strcmp(".irqentry.text", txtname) ||
-		0 == strcmp(".text.unlikely", txtname);
+	return strcmp(".text",           txtname) == 0 ||
+		strcmp(".ref.text",      txtname) == 0 ||
+		strcmp(".sched.text",    txtname) == 0 ||
+		strcmp(".spinlock.text", txtname) == 0 ||
+		strcmp(".irqentry.text", txtname) == 0 ||
+		strcmp(".kprobes.text", txtname) == 0 ||
+		strcmp(".text.unlikely", txtname) == 0;
 }
 
 /* 32 bit and 64 bit are very similar */
@@ -264,43 +295,48 @@ do_file(char const *const fname)
 	w8 = w8nat;
 	switch (ehdr->e_ident[EI_DATA]) {
 		static unsigned int const endian = 1;
-	default: {
+	default:
 		fprintf(stderr, "unrecognized ELF data encoding %d: %s\n",
 			ehdr->e_ident[EI_DATA], fname);
 		fail_file();
-	} break;
-	case ELFDATA2LSB: {
-		if (1 != *(unsigned char const *)&endian) {
+		break;
+	case ELFDATA2LSB:
+		if (*(unsigned char const *)&endian != 1) {
 			/* main() is big endian, file.o is little endian. */
 			w = w4rev;
 			w2 = w2rev;
 			w8 = w8rev;
 		}
-	} break;
-	case ELFDATA2MSB: {
-		if (0 != *(unsigned char const *)&endian) {
+		break;
+	case ELFDATA2MSB:
+		if (*(unsigned char const *)&endian != 0) {
 			/* main() is little endian, file.o is big endian. */
 			w = w4rev;
 			w2 = w2rev;
 			w8 = w8rev;
 		}
-	} break;
+		break;
 	}  /* end switch */
-	if (0 != memcmp(ELFMAG, ehdr->e_ident, SELFMAG)
-	||  ET_REL != w2(ehdr->e_type)
-	||  EV_CURRENT != ehdr->e_ident[EI_VERSION]) {
+	if (memcmp(ELFMAG, ehdr->e_ident, SELFMAG) != 0
+	||  w2(ehdr->e_type) != ET_REL
+	||  ehdr->e_ident[EI_VERSION] != EV_CURRENT) {
 		fprintf(stderr, "unrecognized ET_REL file %s\n", fname);
 		fail_file();
 	}
 
 	gpfx = 0;
 	switch (w2(ehdr->e_machine)) {
-	default: {
+	default:
 		fprintf(stderr, "unrecognized e_machine %d %s\n",
 			w2(ehdr->e_machine), fname);
 		fail_file();
-	} break;
-	case EM_386:	 reltype = R_386_32;                   break;
+		break;
+	case EM_386:
+		reltype = R_386_32;
+		make_nop = make_nop_x86;
+		ideal_nop = ideal_nop5_x86_32;
+		mcount_adjust_32 = -1;
+		break;
 	case EM_ARM:	 reltype = R_ARM_ABS32;
 			 altmcount = "__gnu_mcount_nc";
 			 break;
@@ -311,67 +347,91 @@ do_file(char const *const fname)
 	case EM_S390:    /* reltype: e_class    */ gpfx = '_'; break;
 	case EM_SH:	 reltype = R_SH_DIR32;                 break;
 	case EM_SPARCV9: reltype = R_SPARC_64;     gpfx = '_'; break;
-	case EM_X86_64:	 reltype = R_X86_64_64;                break;
+	case EM_X86_64:
+		make_nop = make_nop_x86;
+		ideal_nop = ideal_nop5_x86_64;
+		reltype = R_X86_64_64;
+		mcount_adjust_64 = -1;
+		break;
 	}  /* end switch */
 
 	switch (ehdr->e_ident[EI_CLASS]) {
-	default: {
+	default:
 		fprintf(stderr, "unrecognized ELF class %d %s\n",
 			ehdr->e_ident[EI_CLASS], fname);
 		fail_file();
-	} break;
-	case ELFCLASS32: {
-		if (sizeof(Elf32_Ehdr) != w2(ehdr->e_ehsize)
-		||  sizeof(Elf32_Shdr) != w2(ehdr->e_shentsize)) {
+		break;
+	case ELFCLASS32:
+		if (w2(ehdr->e_ehsize) != sizeof(Elf32_Ehdr)
+		||  w2(ehdr->e_shentsize) != sizeof(Elf32_Shdr)) {
 			fprintf(stderr,
 				"unrecognized ET_REL file: %s\n", fname);
 			fail_file();
 		}
-		if (EM_S390 == w2(ehdr->e_machine))
+		if (w2(ehdr->e_machine) == EM_S390) {
 			reltype = R_390_32;
-		if (EM_MIPS == w2(ehdr->e_machine)) {
+			mcount_adjust_32 = -4;
+		}
+		if (w2(ehdr->e_machine) == EM_MIPS) {
 			reltype = R_MIPS_32;
 			is_fake_mcount32 = MIPS32_is_fake_mcount;
 		}
 		do32(ehdr, fname, reltype);
-	} break;
+		break;
 	case ELFCLASS64: {
 		Elf64_Ehdr *const ghdr = (Elf64_Ehdr *)ehdr;
-		if (sizeof(Elf64_Ehdr) != w2(ghdr->e_ehsize)
-		||  sizeof(Elf64_Shdr) != w2(ghdr->e_shentsize)) {
+		if (w2(ghdr->e_ehsize) != sizeof(Elf64_Ehdr)
+		||  w2(ghdr->e_shentsize) != sizeof(Elf64_Shdr)) {
 			fprintf(stderr,
 				"unrecognized ET_REL file: %s\n", fname);
 			fail_file();
 		}
-		if (EM_S390 == w2(ghdr->e_machine))
+		if (w2(ghdr->e_machine) == EM_S390) {
 			reltype = R_390_64;
-		if (EM_MIPS == w2(ghdr->e_machine)) {
+			mcount_adjust_64 = -8;
+		}
+		if (w2(ghdr->e_machine) == EM_MIPS) {
 			reltype = R_MIPS_64;
 			Elf64_r_sym = MIPS64_r_sym;
 			Elf64_r_info = MIPS64_r_info;
 			is_fake_mcount64 = MIPS64_is_fake_mcount;
 		}
 		do64(ghdr, fname, reltype);
-	} break;
+		break;
+	}
 	}  /* end switch */
 
 	cleanup();
 }
 
 int
-main(int argc, char const *argv[])
+main(int argc, char *argv[])
 {
 	const char ftrace[] = "/ftrace.o";
 	int ftrace_size = sizeof(ftrace) - 1;
 	int n_error = 0;  /* gcc-4.3.0 false positive complaint */
+	int c;
+	int i;
+
+	while ((c = getopt(argc, argv, "w")) >= 0) {
+		switch (c) {
+		case 'w':
+			warn_on_notrace_sect = 1;
+			break;
+		default:
+			fprintf(stderr, "usage: recordmcount [-w] file.o...\n");
+			return 0;
+		}
+	}
 
-	if (argc <= 1) {
-		fprintf(stderr, "usage: recordmcount file.o...\n");
+	if ((argc - optind) < 1) {
+		fprintf(stderr, "usage: recordmcount [-w] file.o...\n");
 		return 0;
 	}
 
 	/* Process each file in turn, allowing deep failure. */
-	for (--argc, ++argv; 0 < argc; --argc, ++argv) {
+	for (i = optind; i < argc; i++) {
+		char *file = argv[i];
 		int const sjval = setjmp(jmpenv);
 		int len;
 
@@ -380,29 +440,29 @@ main(int argc, char const *argv[])
 		 * function but does not call it. Since ftrace.o should
 		 * not be traced anyway, we just skip it.
 		 */
-		len = strlen(argv[0]);
+		len = strlen(file);
 		if (len >= ftrace_size &&
-		    strcmp(argv[0] + (len - ftrace_size), ftrace) == 0)
+		    strcmp(file + (len - ftrace_size), ftrace) == 0)
 			continue;
 
 		switch (sjval) {
-		default: {
-			fprintf(stderr, "internal error: %s\n", argv[0]);
+		default:
+			fprintf(stderr, "internal error: %s\n", file);
 			exit(1);
-		} break;
-		case SJ_SETJMP: {  /* normal sequence */
+			break;
+		case SJ_SETJMP:    /* normal sequence */
 			/* Avoid problems if early cleanup() */
 			fd_map = -1;
 			ehdr_curr = NULL;
 			mmap_failed = 1;
-			do_file(argv[0]);
-		} break;
-		case SJ_FAIL: {  /* error in do_file or below */
+			do_file(file);
+			break;
+		case SJ_FAIL:    /* error in do_file or below */
 			++n_error;
-		} break;
-		case SJ_SUCCEED: {  /* premature success */
+			break;
+		case SJ_SUCCEED:    /* premature success */
 			/* do nothing */
-		} break;
+			break;
 		}  /* end switch */
 	}
 	return !!n_error;
diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
index baf187bee98..4be60364a40 100644
--- a/scripts/recordmcount.h
+++ b/scripts/recordmcount.h
@@ -22,11 +22,15 @@
 #undef is_fake_mcount
 #undef fn_is_fake_mcount
 #undef MIPS_is_fake_mcount
+#undef mcount_adjust
 #undef sift_rel_mcount
+#undef nop_mcount
 #undef find_secsym_ndx
 #undef __has_rel_mcount
 #undef has_rel_mcount
 #undef tot_relsize
+#undef get_mcountsym
+#undef get_sym_str_and_relp
 #undef do_func
 #undef Elf_Addr
 #undef Elf_Ehdr
@@ -49,14 +53,18 @@
 #ifdef RECORD_MCOUNT_64
 # define append_func		append64
 # define sift_rel_mcount	sift64_rel_mcount
+# define nop_mcount		nop_mcount_64
 # define find_secsym_ndx	find64_secsym_ndx
 # define __has_rel_mcount	__has64_rel_mcount
 # define has_rel_mcount		has64_rel_mcount
 # define tot_relsize		tot64_relsize
+# define get_sym_str_and_relp	get_sym_str_and_relp_64
 # define do_func		do64
+# define get_mcountsym		get_mcountsym_64
 # define is_fake_mcount		is_fake_mcount64
 # define fn_is_fake_mcount	fn_is_fake_mcount64
 # define MIPS_is_fake_mcount	MIPS64_is_fake_mcount
+# define mcount_adjust		mcount_adjust_64
 # define Elf_Addr		Elf64_Addr
 # define Elf_Ehdr		Elf64_Ehdr
 # define Elf_Shdr		Elf64_Shdr
@@ -77,14 +85,18 @@
 #else
 # define append_func		append32
 # define sift_rel_mcount	sift32_rel_mcount
+# define nop_mcount		nop_mcount_32
 # define find_secsym_ndx	find32_secsym_ndx
 # define __has_rel_mcount	__has32_rel_mcount
 # define has_rel_mcount		has32_rel_mcount
 # define tot_relsize		tot32_relsize
+# define get_sym_str_and_relp	get_sym_str_and_relp_32
 # define do_func		do32
+# define get_mcountsym		get_mcountsym_32
 # define is_fake_mcount		is_fake_mcount32
 # define fn_is_fake_mcount	fn_is_fake_mcount32
 # define MIPS_is_fake_mcount	MIPS32_is_fake_mcount
+# define mcount_adjust		mcount_adjust_32
 # define Elf_Addr		Elf32_Addr
 # define Elf_Ehdr		Elf32_Ehdr
 # define Elf_Shdr		Elf32_Shdr
@@ -123,6 +135,8 @@ static void fn_ELF_R_INFO(Elf_Rel *const rp, unsigned sym, unsigned type)
 }
 static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO;
 
+static int mcount_adjust = 0;
+
 /*
  * MIPS mcount long call has 2 _mcount symbols, only the position of the 1st
  * _mcount symbol is needed for dynamic function tracer, with it, to disable
@@ -234,6 +248,49 @@ static void append_func(Elf_Ehdr *const ehdr,
 	uwrite(fd_map, ehdr, sizeof(*ehdr));
 }
 
+static unsigned get_mcountsym(Elf_Sym const *const sym0,
+			      Elf_Rel const *relp,
+			      char const *const str0)
+{
+	unsigned mcountsym = 0;
+
+	Elf_Sym const *const symp =
+		&sym0[Elf_r_sym(relp)];
+	char const *symname = &str0[w(symp->st_name)];
+	char const *mcount = gpfx == '_' ? "_mcount" : "mcount";
+
+	if (symname[0] == '.')
+		++symname;  /* ppc64 hack */
+	if (strcmp(mcount, symname) == 0 ||
+	    (altmcount && strcmp(altmcount, symname) == 0))
+		mcountsym = Elf_r_sym(relp);
+
+	return mcountsym;
+}
+
+static void get_sym_str_and_relp(Elf_Shdr const *const relhdr,
+				 Elf_Ehdr const *const ehdr,
+				 Elf_Sym const **sym0,
+				 char const **str0,
+				 Elf_Rel const **relp)
+{
+	Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff)
+		+ (void *)ehdr);
+	unsigned const symsec_sh_link = w(relhdr->sh_link);
+	Elf_Shdr const *const symsec = &shdr0[symsec_sh_link];
+	Elf_Shdr const *const strsec = &shdr0[w(symsec->sh_link)];
+	Elf_Rel const *const rel0 = (Elf_Rel const *)(_w(relhdr->sh_offset)
+		+ (void *)ehdr);
+
+	*sym0 = (Elf_Sym const *)(_w(symsec->sh_offset)
+				  + (void *)ehdr);
+
+	*str0 = (char const *)(_w(strsec->sh_offset)
+			       + (void *)ehdr);
+
+	*relp = rel0;
+}
+
 /*
  * Look at the relocations in order to find the calls to mcount.
  * Accumulate the section offsets that are found, and their relocation info,
@@ -250,47 +307,27 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 {
 	uint_t *const mloc0 = mlocp;
 	Elf_Rel *mrelp = *mrelpp;
-	Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff)
-		+ (void *)ehdr);
-	unsigned const symsec_sh_link = w(relhdr->sh_link);
-	Elf_Shdr const *const symsec = &shdr0[symsec_sh_link];
-	Elf_Sym const *const sym0 = (Elf_Sym const *)(_w(symsec->sh_offset)
-		+ (void *)ehdr);
-
-	Elf_Shdr const *const strsec = &shdr0[w(symsec->sh_link)];
-	char const *const str0 = (char const *)(_w(strsec->sh_offset)
-		+ (void *)ehdr);
-
-	Elf_Rel const *const rel0 = (Elf_Rel const *)(_w(relhdr->sh_offset)
-		+ (void *)ehdr);
+	Elf_Sym const *sym0;
+	char const *str0;
+	Elf_Rel const *relp;
 	unsigned rel_entsize = _w(relhdr->sh_entsize);
 	unsigned const nrel = _w(relhdr->sh_size) / rel_entsize;
-	Elf_Rel const *relp = rel0;
-
 	unsigned mcountsym = 0;
 	unsigned t;
 
+	get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
+
 	for (t = nrel; t; --t) {
-		if (!mcountsym) {
-			Elf_Sym const *const symp =
-				&sym0[Elf_r_sym(relp)];
-			char const *symname = &str0[w(symp->st_name)];
-			char const *mcount = '_' == gpfx ? "_mcount" : "mcount";
-
-			if ('.' == symname[0])
-				++symname;  /* ppc64 hack */
-			if (0 == strcmp(mcount, symname) ||
-			    (altmcount && 0 == strcmp(altmcount, symname)))
-				mcountsym = Elf_r_sym(relp);
-		}
+		if (!mcountsym)
+			mcountsym = get_mcountsym(sym0, relp, str0);
 
 		if (mcountsym == Elf_r_sym(relp) && !is_fake_mcount(relp)) {
-			uint_t const addend = _w(_w(relp->r_offset) - recval);
-
+			uint_t const addend =
+				_w(_w(relp->r_offset) - recval + mcount_adjust);
 			mrelp->r_offset = _w(offbase
 				+ ((void *)mlocp - (void *)mloc0));
 			Elf_r_info(mrelp, recsym, reltype);
-			if (sizeof(Elf_Rela) == rel_entsize) {
+			if (rel_entsize == sizeof(Elf_Rela)) {
 				((Elf_Rela *)mrelp)->r_addend = addend;
 				*mlocp++ = 0;
 			} else
@@ -304,6 +341,63 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 	return mlocp;
 }
 
+/*
+ * Read the relocation table again, but this time its called on sections
+ * that are not going to be traced. The mcount calls here will be converted
+ * into nops.
+ */
+static void nop_mcount(Elf_Shdr const *const relhdr,
+		       Elf_Ehdr const *const ehdr,
+		       const char *const txtname)
+{
+	Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff)
+		+ (void *)ehdr);
+	Elf_Sym const *sym0;
+	char const *str0;
+	Elf_Rel const *relp;
+	Elf_Shdr const *const shdr = &shdr0[w(relhdr->sh_info)];
+	unsigned rel_entsize = _w(relhdr->sh_entsize);
+	unsigned const nrel = _w(relhdr->sh_size) / rel_entsize;
+	unsigned mcountsym = 0;
+	unsigned t;
+	int once = 0;
+
+	get_sym_str_and_relp(relhdr, ehdr, &sym0, &str0, &relp);
+
+	for (t = nrel; t; --t) {
+		int ret = -1;
+
+		if (!mcountsym)
+			mcountsym = get_mcountsym(sym0, relp, str0);
+
+		if (mcountsym == Elf_r_sym(relp) && !is_fake_mcount(relp)) {
+			if (make_nop)
+				ret = make_nop((void *)ehdr, shdr->sh_offset + relp->r_offset);
+			if (warn_on_notrace_sect && !once) {
+				printf("Section %s has mcount callers being ignored\n",
+				       txtname);
+				once = 1;
+				/* just warn? */
+				if (!make_nop)
+					return;
+			}
+		}
+
+		/*
+		 * If we successfully removed the mcount, mark the relocation
+		 * as a nop (don't do anything with it).
+		 */
+		if (!ret) {
+			Elf_Rel rel;
+			rel = *(Elf_Rel *)relp;
+			Elf_r_info(&rel, Elf_r_sym(relp), rel_type_nop);
+			ulseek(fd_map, (void *)relp - (void *)ehdr, SEEK_SET);
+			uwrite(fd_map, &rel, sizeof(rel));
+		}
+		relp = (Elf_Rel const *)(rel_entsize + (void *)relp);
+	}
+}
+
 
 /*
  * Find a symbol in the given section, to be used as the base for relocating
@@ -354,13 +448,13 @@ __has_rel_mcount(Elf_Shdr const *const relhdr,  /* is SHT_REL or SHT_RELA */
 	Elf_Shdr const *const txthdr = &shdr0[w(relhdr->sh_info)];
 	char const *const txtname = &shstrtab[w(txthdr->sh_name)];
 
-	if (0 == strcmp("__mcount_loc", txtname)) {
+	if (strcmp("__mcount_loc", txtname) == 0) {
 		fprintf(stderr, "warning: __mcount_loc already exists: %s\n",
 			fname);
 		succeed_file();
 	}
-	if (SHT_PROGBITS != w(txthdr->sh_type) ||
-	    !is_mcounted_section_name(txtname))
+	if (w(txthdr->sh_type) != SHT_PROGBITS ||
+	    !(w(txthdr->sh_flags) & SHF_EXECINSTR))
 		return NULL;
 	return txtname;
 }
@@ -370,7 +464,7 @@ static char const *has_rel_mcount(Elf_Shdr const *const relhdr,
 				  char const *const shstrtab,
 				  char const *const fname)
 {
-	if (SHT_REL  != w(relhdr->sh_type) && SHT_RELA != w(relhdr->sh_type))
+	if (w(relhdr->sh_type) != SHT_REL && w(relhdr->sh_type) != SHT_RELA)
 		return NULL;
 	return __has_rel_mcount(relhdr, shdr0, shstrtab, fname);
 }
@@ -383,9 +477,11 @@ static unsigned tot_relsize(Elf_Shdr const *const shdr0,
 {
 	unsigned totrelsz = 0;
 	Elf_Shdr const *shdrp = shdr0;
+	char const *txtname;
 
 	for (; nhdr; --nhdr, ++shdrp) {
-		if (has_rel_mcount(shdrp, shdr0, shstrtab, fname))
+		txtname = has_rel_mcount(shdrp, shdr0, shstrtab, fname);
+		if (txtname && is_mcounted_section_name(txtname))
 			totrelsz += _w(shdrp->sh_size);
 	}
 	return totrelsz;
@@ -421,7 +517,7 @@ do_func(Elf_Ehdr *const ehdr, char const *const fname, unsigned const reltype)
 	for (relhdr = shdr0, k = nhdr; k; --k, ++relhdr) {
 		char const *const txtname = has_rel_mcount(relhdr, shdr0,
 			shstrtab, fname);
-		if (txtname) {
+		if (txtname && is_mcounted_section_name(txtname)) {
 			uint_t recval = 0;
 			unsigned const recsym = find_secsym_ndx(
 				w(relhdr->sh_info), txtname, &recval,
@@ -432,6 +528,12 @@ do_func(Elf_Ehdr *const ehdr, char const *const fname, unsigned const reltype)
 			mlocp = sift_rel_mcount(mlocp,
 				(void *)mlocp - (void *)mloc0, &mrelp,
 				relhdr, ehdr, recsym, recval, reltype);
+		} else if (txtname && (warn_on_notrace_sect || make_nop)) {
+			/*
+			 * This section is ignored by ftrace, but still
+			 * has mcount calls. Convert them to nops now.
+			 */
+			nop_mcount(relhdr, ehdr, txtname);
 		}
 	}
 	if (mloc0 != mlocp) {
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 4be0deea71c..858966ab019 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -134,6 +134,7 @@ my %text_sections = (
      ".sched.text" => 1,
      ".spinlock.text" => 1,
      ".irqentry.text" => 1,
+     ".kprobes.text" => 1,
      ".text.unlikely" => 1,
 );
 
@@ -222,6 +223,7 @@ if ($arch eq "x86_64") {
     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount([+-]0x[0-9a-zA-Z]+)?\$";
     $type = ".quad";
     $alignment = 8;
+    $mcount_adjust = -1;
 
     # force flags for this arch
     $ld .= " -m elf_x86_64";
@@ -231,6 +233,7 @@ if ($arch eq "x86_64") {
 
 } elsif ($arch eq "i386") {
     $alignment = 4;
+    $mcount_adjust = -1;
 
     # force flags for this arch
     $ld .= " -m elf_i386";
@@ -240,12 +243,14 @@ if ($arch eq "x86_64") {
 
 } elsif ($arch eq "s390" && $bits == 32) {
     $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_32\\s+_mcount\$";
+    $mcount_adjust = -4;
     $alignment = 4;
     $ld .= " -m elf_s390";
     $cc .= " -m31";
 
 } elsif ($arch eq "s390" && $bits == 64) {
     $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";
+    $mcount_adjust = -8;
     $alignment = 8;
     $type = ".quad";
     $ld .= " -m elf64_s390";
diff --git a/scripts/rt-tester/rt-tester.py b/scripts/rt-tester/rt-tester.py
index 8c81d76959e..34186cac1d2 100644
--- a/scripts/rt-tester/rt-tester.py
+++ b/scripts/rt-tester/rt-tester.py
@@ -180,7 +180,7 @@ while 1:
                 for s in stat:
 		    s = s.strip()
                     if s.startswith(testop[0]):
-                        # Seperate status value
+                        # Separate status value
                         val = s[2:].strip()
                         query = analyse(val, testop, dat)
                         break
diff --git a/security/apparmor/match.c b/security/apparmor/match.c
index 5cb4dc1f699..06d764ccbbe 100644
--- a/security/apparmor/match.c
+++ b/security/apparmor/match.c
@@ -195,7 +195,7 @@ void aa_dfa_free_kref(struct kref *kref)
  *
  * Unpack a dfa that has been serialized.  To find information on the dfa
  * format look in Documentation/apparmor.txt
- * Assumes the dfa @blob stream has been aligned on a 8 byte boundry
+ * Assumes the dfa @blob stream has been aligned on a 8 byte boundary
  *
  * Returns: an unpacked dfa ready for matching or ERR_PTR on failure
  */
diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c
index eb3700e9fd3..e33aaf7e574 100644
--- a/security/apparmor/policy_unpack.c
+++ b/security/apparmor/policy_unpack.c
@@ -359,7 +359,7 @@ fail:
  * @e: serialized data extent information  (NOT NULL)
  * @profile: profile to add the accept table to (NOT NULL)
  *
- * Returns: 1 if table succesfully unpacked
+ * Returns: 1 if table successfully unpacked
  */
 static bool unpack_trans_table(struct aa_ext *e, struct aa_profile *profile)
 {
diff --git a/security/capability.c b/security/capability.c
index 2984ea4f776..bbb51156261 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -181,7 +181,7 @@ static int cap_inode_follow_link(struct dentry *dentry,
 	return 0;
 }
 
-static int cap_inode_permission(struct inode *inode, int mask)
+static int cap_inode_permission(struct inode *inode, int mask, unsigned flags)
 {
 	return 0;
 }
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index c6ca8662a46..f66baf44f32 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -69,18 +69,6 @@ error:
 EXPORT_SYMBOL_GPL(user_instantiate);
 
 /*
- * dispose of the old data from an updated user defined key
- */
-static void user_update_rcu_disposal(struct rcu_head *rcu)
-{
-	struct user_key_payload *upayload;
-
-	upayload = container_of(rcu, struct user_key_payload, rcu);
-
-	kfree(upayload);
-}
-
-/*
  * update a user defined key
  * - the key's semaphore is write-locked
  */
@@ -114,7 +102,7 @@ int user_update(struct key *key, const void *data, size_t datalen)
 		key->expiry = 0;
 	}
 
-	call_rcu(&zap->rcu, user_update_rcu_disposal);
+	kfree_rcu(zap, rcu);
 
 error:
 	return ret;
@@ -145,7 +133,7 @@ void user_revoke(struct key *key)
 
 	if (upayload) {
 		rcu_assign_pointer(key->payload.data, NULL);
-		call_rcu(&upayload->rcu, user_update_rcu_disposal);
+		kfree_rcu(upayload, rcu);
 	}
 }
 
diff --git a/security/security.c b/security/security.c
index 101142369db..4ba6d4cc061 100644
--- a/security/security.c
+++ b/security/security.c
@@ -518,16 +518,14 @@ int security_inode_permission(struct inode *inode, int mask)
 {
 	if (unlikely(IS_PRIVATE(inode)))
 		return 0;
-	return security_ops->inode_permission(inode, mask);
+	return security_ops->inode_permission(inode, mask, 0);
 }
 
 int security_inode_exec_permission(struct inode *inode, unsigned int flags)
 {
 	if (unlikely(IS_PRIVATE(inode)))
 		return 0;
-	if (flags)
-		return -ECHILD;
-	return security_ops->inode_permission(inode, MAY_EXEC);
+	return security_ops->inode_permission(inode, MAY_EXEC, flags);
 }
 
 int security_inode_setattr(struct dentry *dentry, struct iattr *attr)
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index 9da6420e205..3d2715fd35e 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -38,11 +38,7 @@
 #define AVC_CACHE_RECLAIM		16
 
 #ifdef CONFIG_SECURITY_SELINUX_AVC_STATS
-#define avc_cache_stats_incr(field)				\
-do {								\
-	per_cpu(avc_cache_stats, get_cpu()).field++;		\
-	put_cpu();						\
-} while (0)
+#define avc_cache_stats_incr(field)	this_cpu_inc(avc_cache_stats.field)
 #else
 #define avc_cache_stats_incr(field)	do {} while (0)
 #endif
@@ -347,11 +343,10 @@ static struct avc_node *avc_lookup(u32 ssid, u32 tsid, u16 tclass)
 	node = avc_search_node(ssid, tsid, tclass);
 
 	if (node)
-		avc_cache_stats_incr(hits);
-	else
-		avc_cache_stats_incr(misses);
+		return node;
 
-	return node;
+	avc_cache_stats_incr(misses);
+	return NULL;
 }
 
 static int avc_latest_notif_update(int seqno, int is_insert)
@@ -471,6 +466,7 @@ static void avc_audit_post_callback(struct audit_buffer *ab, void *a)
  * @avd: access vector decisions
  * @result: result from avc_has_perm_noaudit
  * @a:  auxiliary audit data
+ * @flags: VFS walk flags
  *
  * Audit the granting or denial of permissions in accordance
  * with the policy.  This function is typically called by
@@ -481,9 +477,10 @@ static void avc_audit_post_callback(struct audit_buffer *ab, void *a)
  * be performed under a lock, to allow the lock to be released
  * before calling the auditing code.
  */
-void avc_audit(u32 ssid, u32 tsid,
+int avc_audit(u32 ssid, u32 tsid,
 	       u16 tclass, u32 requested,
-	       struct av_decision *avd, int result, struct common_audit_data *a)
+	       struct av_decision *avd, int result, struct common_audit_data *a,
+	       unsigned flags)
 {
 	struct common_audit_data stack_data;
 	u32 denied, audited;
@@ -515,11 +512,24 @@ void avc_audit(u32 ssid, u32 tsid,
 	else
 		audited = requested & avd->auditallow;
 	if (!audited)
-		return;
+		return 0;
+
 	if (!a) {
 		a = &stack_data;
 		COMMON_AUDIT_DATA_INIT(a, NONE);
 	}
+
+	/*
+	 * When in a RCU walk do the audit on the RCU retry.  This is because
+	 * the collection of the dname in an inode audit message is not RCU
+	 * safe.  Note this may drop some audits when the situation changes
+	 * during retry. However this is logically just as if the operation
+	 * happened a little later.
+	 */
+	if ((a->type == LSM_AUDIT_DATA_FS) &&
+	    (flags & IPERM_FLAG_RCU))
+		return -ECHILD;
+
 	a->selinux_audit_data.tclass = tclass;
 	a->selinux_audit_data.requested = requested;
 	a->selinux_audit_data.ssid = ssid;
@@ -529,6 +539,7 @@ void avc_audit(u32 ssid, u32 tsid,
 	a->lsm_pre_audit = avc_audit_pre_callback;
 	a->lsm_post_audit = avc_audit_post_callback;
 	common_lsm_audit(a);
+	return 0;
 }
 
 /**
@@ -753,7 +764,7 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid,
 	rcu_read_lock();
 
 	node = avc_lookup(ssid, tsid, tclass);
-	if (!node) {
+	if (unlikely(!node)) {
 		rcu_read_unlock();
 
 		if (in_avd)
@@ -793,6 +804,7 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid,
  * @tclass: target security class
  * @requested: requested permissions, interpreted based on @tclass
  * @auditdata: auxiliary audit data
+ * @flags: VFS walk flags
  *
  * Check the AVC to determine whether the @requested permissions are granted
  * for the SID pair (@ssid, @tsid), interpreting the permissions
@@ -802,14 +814,19 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid,
  * permissions are granted, -%EACCES if any permissions are denied, or
  * another -errno upon other errors.
  */
-int avc_has_perm(u32 ssid, u32 tsid, u16 tclass,
-		 u32 requested, struct common_audit_data *auditdata)
+int avc_has_perm_flags(u32 ssid, u32 tsid, u16 tclass,
+		       u32 requested, struct common_audit_data *auditdata,
+		       unsigned flags)
 {
 	struct av_decision avd;
-	int rc;
+	int rc, rc2;
 
 	rc = avc_has_perm_noaudit(ssid, tsid, tclass, requested, 0, &avd);
-	avc_audit(ssid, tsid, tclass, requested, &avd, rc, auditdata);
+
+	rc2 = avc_audit(ssid, tsid, tclass, requested, &avd, rc, auditdata,
+			flags);
+	if (rc2)
+		return rc2;
 	return rc;
 }
 
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index f9c3764e485..8fb24884300 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1446,8 +1446,11 @@ static int task_has_capability(struct task_struct *tsk,
 	}
 
 	rc = avc_has_perm_noaudit(sid, sid, sclass, av, 0, &avd);
-	if (audit == SECURITY_CAP_AUDIT)
-		avc_audit(sid, sid, sclass, av, &avd, rc, &ad);
+	if (audit == SECURITY_CAP_AUDIT) {
+		int rc2 = avc_audit(sid, sid, sclass, av, &avd, rc, &ad, 0);
+		if (rc2)
+			return rc2;
+	}
 	return rc;
 }
 
@@ -1467,7 +1470,8 @@ static int task_has_system(struct task_struct *tsk,
 static int inode_has_perm(const struct cred *cred,
 			  struct inode *inode,
 			  u32 perms,
-			  struct common_audit_data *adp)
+			  struct common_audit_data *adp,
+			  unsigned flags)
 {
 	struct inode_security_struct *isec;
 	struct common_audit_data ad;
@@ -1487,7 +1491,7 @@ static int inode_has_perm(const struct cred *cred,
 		ad.u.fs.inode = inode;
 	}
 
-	return avc_has_perm(sid, isec->sid, isec->sclass, perms, adp);
+	return avc_has_perm_flags(sid, isec->sid, isec->sclass, perms, adp, flags);
 }
 
 /* Same as inode_has_perm, but pass explicit audit data containing
@@ -1504,7 +1508,7 @@ static inline int dentry_has_perm(const struct cred *cred,
 	COMMON_AUDIT_DATA_INIT(&ad, FS);
 	ad.u.fs.path.mnt = mnt;
 	ad.u.fs.path.dentry = dentry;
-	return inode_has_perm(cred, inode, av, &ad);
+	return inode_has_perm(cred, inode, av, &ad, 0);
 }
 
 /* Check whether a task can use an open file descriptor to
@@ -1540,7 +1544,7 @@ static int file_has_perm(const struct cred *cred,
 	/* av is zero if only checking access to the descriptor. */
 	rc = 0;
 	if (av)
-		rc = inode_has_perm(cred, inode, av, &ad);
+		rc = inode_has_perm(cred, inode, av, &ad, 0);
 
 out:
 	return rc;
@@ -1574,7 +1578,8 @@ static int may_create(struct inode *dir,
 		return rc;
 
 	if (!newsid || !(sbsec->flags & SE_SBLABELSUPP)) {
-		rc = security_transition_sid(sid, dsec->sid, tclass, NULL, &newsid);
+		rc = security_transition_sid(sid, dsec->sid, tclass,
+					     &dentry->d_name, &newsid);
 		if (rc)
 			return rc;
 	}
@@ -2103,7 +2108,7 @@ static inline void flush_unauthorized_files(const struct cred *cred,
 			file = file_priv->file;
 			inode = file->f_path.dentry->d_inode;
 			if (inode_has_perm(cred, inode,
-					   FILE__READ | FILE__WRITE, NULL)) {
+					   FILE__READ | FILE__WRITE, NULL, 0)) {
 				drop_tty = 1;
 			}
 		}
@@ -2635,7 +2640,7 @@ static int selinux_inode_follow_link(struct dentry *dentry, struct nameidata *na
 	return dentry_has_perm(cred, NULL, dentry, FILE__READ);
 }
 
-static int selinux_inode_permission(struct inode *inode, int mask)
+static int selinux_inode_permission(struct inode *inode, int mask, unsigned flags)
 {
 	const struct cred *cred = current_cred();
 	struct common_audit_data ad;
@@ -2657,7 +2662,7 @@ static int selinux_inode_permission(struct inode *inode, int mask)
 
 	perms = file_mask_to_av(inode->i_mode, mask);
 
-	return inode_has_perm(cred, inode, perms, &ad);
+	return inode_has_perm(cred, inode, perms, &ad, flags);
 }
 
 static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr)
@@ -3205,7 +3210,7 @@ static int selinux_dentry_open(struct file *file, const struct cred *cred)
 	 * new inode label or new policy.
 	 * This check is not redundant - do not remove.
 	 */
-	return inode_has_perm(cred, inode, open_file_to_av(file), NULL);
+	return inode_has_perm(cred, inode, open_file_to_av(file), NULL, 0);
 }
 
 /* task security operations */
diff --git a/security/selinux/include/avc.h b/security/selinux/include/avc.h
index 5615081b73e..47fda963495 100644
--- a/security/selinux/include/avc.h
+++ b/security/selinux/include/avc.h
@@ -41,7 +41,6 @@ struct sk_buff;
  */
 struct avc_cache_stats {
 	unsigned int lookups;
-	unsigned int hits;
 	unsigned int misses;
 	unsigned int allocations;
 	unsigned int reclaims;
@@ -54,11 +53,11 @@ struct avc_cache_stats {
 
 void __init avc_init(void);
 
-void avc_audit(u32 ssid, u32 tsid,
+int avc_audit(u32 ssid, u32 tsid,
 	       u16 tclass, u32 requested,
 	       struct av_decision *avd,
 	       int result,
-	       struct common_audit_data *a);
+	      struct common_audit_data *a, unsigned flags);
 
 #define AVC_STRICT 1 /* Ignore permissive mode. */
 int avc_has_perm_noaudit(u32 ssid, u32 tsid,
@@ -66,9 +65,17 @@ int avc_has_perm_noaudit(u32 ssid, u32 tsid,
 			 unsigned flags,
 			 struct av_decision *avd);
 
-int avc_has_perm(u32 ssid, u32 tsid,
-		 u16 tclass, u32 requested,
-		 struct common_audit_data *auditdata);
+int avc_has_perm_flags(u32 ssid, u32 tsid,
+		       u16 tclass, u32 requested,
+		       struct common_audit_data *auditdata,
+		       unsigned);
+
+static inline int avc_has_perm(u32 ssid, u32 tsid,
+			       u16 tclass, u32 requested,
+			       struct common_audit_data *auditdata)
+{
+	return avc_has_perm_flags(ssid, tsid, tclass, requested, auditdata, 0);
+}
 
 u32 avc_policy_seqno(void);
 
diff --git a/security/selinux/netif.c b/security/selinux/netif.c
index d6095d63d83..58cc481c93d 100644
--- a/security/selinux/netif.c
+++ b/security/selinux/netif.c
@@ -104,22 +104,6 @@ static int sel_netif_insert(struct sel_netif *netif)
 }
 
 /**
- * sel_netif_free - Frees an interface entry
- * @p: the entry's RCU field
- *
- * Description:
- * This function is designed to be used as a callback to the call_rcu()
- * function so that memory allocated to a hash table interface entry can be
- * released safely.
- *
- */
-static void sel_netif_free(struct rcu_head *p)
-{
-	struct sel_netif *netif = container_of(p, struct sel_netif, rcu_head);
-	kfree(netif);
-}
-
-/**
  * sel_netif_destroy - Remove an interface record from the table
  * @netif: the existing interface record
  *
@@ -131,7 +115,7 @@ static void sel_netif_destroy(struct sel_netif *netif)
 {
 	list_del_rcu(&netif->list);
 	sel_netif_total--;
-	call_rcu(&netif->rcu_head, sel_netif_free);
+	kfree_rcu(netif, rcu_head);
 }
 
 /**
diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c
index 1c2fc46544b..c3bf3ed07b0 100644
--- a/security/selinux/netlabel.c
+++ b/security/selinux/netlabel.c
@@ -151,7 +151,7 @@ void selinux_netlbl_sk_security_free(struct sk_security_struct *sksec)
  *
  * Description:
  * Called when the NetLabel state of a sk_security_struct needs to be reset.
- * The caller is responsibile for all the NetLabel sk_security_struct locking.
+ * The caller is responsible for all the NetLabel sk_security_struct locking.
  *
  */
 void selinux_netlbl_sk_security_reset(struct sk_security_struct *sksec)
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index ea39cb742ae..c0e1a0f5246 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -1380,10 +1380,14 @@ static int sel_avc_stats_seq_show(struct seq_file *seq, void *v)
 	if (v == SEQ_START_TOKEN)
 		seq_printf(seq, "lookups hits misses allocations reclaims "
 			   "frees\n");
-	else
-		seq_printf(seq, "%u %u %u %u %u %u\n", st->lookups,
-			   st->hits, st->misses, st->allocations,
+	else {
+		unsigned int lookups = st->lookups;
+		unsigned int misses = st->misses;
+		unsigned int hits = lookups - misses;
+		seq_printf(seq, "%u %u %u %u %u %u\n", lookups,
+			   hits, misses, st->allocations,
 			   st->reclaims, st->frees);
+	}
 	return 0;
 }
 
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index e7b850ad57e..7102457661d 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -502,7 +502,7 @@ static int policydb_index(struct policydb *p)
 		goto out;
 
 	rc = flex_array_prealloc(p->type_val_to_struct_array, 0,
-				 p->p_types.nprim - 1, GFP_KERNEL | __GFP_ZERO);
+				 p->p_types.nprim, GFP_KERNEL | __GFP_ZERO);
 	if (rc)
 		goto out;
 
@@ -519,7 +519,7 @@ static int policydb_index(struct policydb *p)
 			goto out;
 
 		rc = flex_array_prealloc(p->sym_val_to_name[i],
-					 0, p->symtab[i].nprim - 1,
+					 0, p->symtab[i].nprim,
 					 GFP_KERNEL | __GFP_ZERO);
 		if (rc)
 			goto out;
@@ -1819,8 +1819,6 @@ static int filename_trans_read(struct policydb *p, void *fp)
 		goto out;
 	nel = le32_to_cpu(buf[0]);
 
-	printk(KERN_ERR "%s: nel=%d\n", __func__, nel);
-
 	last = p->filename_trans;
 	while (last && last->next)
 		last = last->next;
@@ -1857,8 +1855,6 @@ static int filename_trans_read(struct policydb *p, void *fp)
 			goto out;
 		name[len] = 0;
 
-		printk(KERN_ERR "%s: ft=%p ft->name=%p ft->name=%s\n", __func__, ft, ft->name, ft->name);
-
 		rc = next_entry(buf, fp, sizeof(u32) * 4);
 		if (rc)
 			goto out;
@@ -2375,7 +2371,7 @@ int policydb_read(struct policydb *p, void *fp)
 		goto bad;
 
 	/* preallocate so we don't have to worry about the put ever failing */
-	rc = flex_array_prealloc(p->type_attr_map_array, 0, p->p_types.nprim - 1,
+	rc = flex_array_prealloc(p->type_attr_map_array, 0, p->p_types.nprim,
 				 GFP_KERNEL | __GFP_ZERO);
 	if (rc)
 		goto bad;
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index ea7c01f4a2b..6ef4af47dac 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -2806,7 +2806,7 @@ int selinux_audit_rule_init(u32 field, u32 op, char *rulestr, void **vrule)
 	case AUDIT_SUBJ_CLR:
 	case AUDIT_OBJ_LEV_LOW:
 	case AUDIT_OBJ_LEV_HIGH:
-		/* we do not allow a range, indicated by the presense of '-' */
+		/* we do not allow a range, indicated by the presence of '-' */
 		if (strchr(rulestr, '-'))
 			return -EINVAL;
 		break;
@@ -3075,7 +3075,7 @@ static void security_netlbl_cache_add(struct netlbl_lsm_secattr *secattr,
  * Description:
  * Convert the given NetLabel security attributes in @secattr into a
  * SELinux SID.  If the @secattr field does not contain a full SELinux
- * SID/context then use SECINITSID_NETMSG as the foundation.  If possibile the
+ * SID/context then use SECINITSID_NETMSG as the foundation.  If possible the
  * 'cache' field of @secattr is set and the CACHE flag is set; this is to
  * allow the @secattr to be used by NetLabel to cache the secattr to SID
  * conversion for future lookups.  Returns zero on success, negative values on
diff --git a/security/smack/smack_access.c b/security/smack/smack_access.c
index 86453db4333..9637e107f7e 100644
--- a/security/smack/smack_access.c
+++ b/security/smack/smack_access.c
@@ -431,7 +431,7 @@ char *smk_import(const char *string, int len)
  * smack_from_secid - find the Smack label associated with a secid
  * @secid: an integer that might be associated with a Smack label
  *
- * Returns a pointer to the appropraite Smack label if there is one,
+ * Returns a pointer to the appropriate Smack label if there is one,
  * otherwise a pointer to the invalid Smack label.
  */
 char *smack_from_secid(const u32 secid)
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 23c7a6d0c80..400a5d5cde6 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -686,7 +686,7 @@ static int smack_inode_rename(struct inode *old_inode,
  *
  * Returns 0 if access is permitted, -EACCES otherwise
  */
-static int smack_inode_permission(struct inode *inode, int mask)
+static int smack_inode_permission(struct inode *inode, int mask, unsigned flags)
 {
 	struct smk_audit_info ad;
 
@@ -696,6 +696,10 @@ static int smack_inode_permission(struct inode *inode, int mask)
 	 */
 	if (mask == 0)
 		return 0;
+
+	/* May be droppable after audit */
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
 	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_FS);
 	smk_ad_setfield_u_fs_inode(&ad, inode);
 	return smk_curacc(smk_of_inode(inode), mask, &ad);
@@ -1794,7 +1798,7 @@ static void smack_set_catset(char *catset, struct netlbl_lsm_secattr *sap)
  * Casey says that CIPSO is good enough for now.
  * It can be used to effect.
  * It can also be abused to effect when necessary.
- * Appologies to the TSIG group in general and GW in particular.
+ * Apologies to the TSIG group in general and GW in particular.
  */
 static void smack_to_secattr(char *smack, struct netlbl_lsm_secattr *nlsp)
 {
@@ -2530,7 +2534,7 @@ static void smack_d_instantiate(struct dentry *opt_dentry, struct inode *inode)
 	switch (sbp->s_magic) {
 	case SMACK_MAGIC:
 		/*
-		 * Casey says that it's a little embarassing
+		 * Casey says that it's a little embarrassing
 		 * that the smack file system doesn't do
 		 * extended attributes.
 		 */
@@ -3084,7 +3088,7 @@ static int smack_inet_conn_request(struct sock *sk, struct sk_buff *skb,
 	/*
 	 * We need to decide if we want to label the incoming connection here
 	 * if we do we only need to label the request_sock and the stack will
-	 * propogate the wire-label to the sock when it is created.
+	 * propagate the wire-label to the sock when it is created.
 	 */
 	hdr = ip_hdr(skb);
 	addr.sin_addr.s_addr = hdr->saddr;
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 90d1bbaaa6f..f93460156dc 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -208,7 +208,7 @@ static ssize_t smk_write_load_list(struct file *file, const char __user *buf,
 	if (*ppos != 0)
 		return -EINVAL;
 	/*
-	 * Minor hack for backward compatability
+	 * Minor hack for backward compatibility
 	 */
 	if (count < (SMK_OLOADLEN) || count > SMK_LOADLEN)
 		return -EINVAL;
@@ -223,7 +223,7 @@ static ssize_t smk_write_load_list(struct file *file, const char __user *buf,
 	}
 
 	/*
-	 * More on the minor hack for backward compatability
+	 * More on the minor hack for backward compatibility
 	 */
 	if (count == (SMK_OLOADLEN))
 		data[SMK_OLOADLEN] = '-';
@@ -927,7 +927,7 @@ static ssize_t smk_write_netlbladdr(struct file *file, const char __user *buf,
 		}
 	} else {
 		/* we delete the unlabeled entry, only if the previous label
-		 * wasnt the special CIPSO option */
+		 * wasn't the special CIPSO option */
 		if (skp->smk_label != smack_cipso_option)
 			rc = netlbl_cfg_unlbl_static_del(&init_net, NULL,
 					&skp->smk_host.sin_addr, &skp->smk_mask,
diff --git a/security/tomoyo/load_policy.c b/security/tomoyo/load_policy.c
index bbada7ca1b9..3312e5624f2 100644
--- a/security/tomoyo/load_policy.c
+++ b/security/tomoyo/load_policy.c
@@ -23,7 +23,7 @@ static bool tomoyo_policy_loader_exists(void)
 	 * If the initrd includes /sbin/init but real-root-dev has not
 	 * mounted on / yet, activating MAC will block the system since
 	 * policies are not loaded yet.
-	 * Thus, let do_execve() call this function everytime.
+	 * Thus, let do_execve() call this function every time.
 	 */
 	struct path path;
 
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index 8808b82311b..76e0d569507 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -140,6 +140,9 @@ int __pxa2xx_pcm_prepare(struct snd_pcm_substream *substream)
 	if (!prtd || !prtd->params)
 		return 0;
 
+	if (prtd->dma_ch == -1)
+		return -EINVAL;
+
 	DCSR(prtd->dma_ch) &= ~DCSR_RUN;
 	DCSR(prtd->dma_ch) = 0;
 	DCMD(prtd->dma_ch) = 0;
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a82e3756a72..64449cb8f87 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -375,6 +375,7 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream,
 	}
 
 	if (runtime->no_period_wakeup) {
+		snd_pcm_sframes_t xrun_threshold;
 		/*
 		 * Without regular period interrupts, we have to check
 		 * the elapsed time to detect xruns.
@@ -383,7 +384,8 @@ static int snd_pcm_update_hw_ptr0(struct snd_pcm_substream *substream,
 		if (jdelta < runtime->hw_ptr_buffer_jiffies / 2)
 			goto no_delta_check;
 		hdelta = jdelta - delta * HZ / runtime->rate;
-		while (hdelta > runtime->hw_ptr_buffer_jiffies / 2 + 1) {
+		xrun_threshold = runtime->hw_ptr_buffer_jiffies / 2 + 1;
+		while (hdelta > xrun_threshold) {
 			delta += runtime->buffer_size;
 			hw_base += runtime->buffer_size;
 			if (hw_base >= runtime->boundary)
diff --git a/sound/core/pcm_memory.c b/sound/core/pcm_memory.c
index 917e4055ee3..150cb7edffe 100644
--- a/sound/core/pcm_memory.c
+++ b/sound/core/pcm_memory.c
@@ -253,7 +253,7 @@ static int snd_pcm_lib_preallocate_pages1(struct snd_pcm_substream *substream,
  * snd_pcm_lib_preallocate_pages - pre-allocation for the given DMA type
  * @substream: the pcm substream instance
  * @type: DMA type (SNDRV_DMA_TYPE_*)
- * @data: DMA type dependant data
+ * @data: DMA type dependent data
  * @size: the requested pre-allocation size in bytes
  * @max: the max. allowed pre-allocation size
  *
@@ -278,10 +278,10 @@ int snd_pcm_lib_preallocate_pages(struct snd_pcm_substream *substream,
 EXPORT_SYMBOL(snd_pcm_lib_preallocate_pages);
 
 /**
- * snd_pcm_lib_preallocate_pages_for_all - pre-allocation for continous memory type (all substreams)
+ * snd_pcm_lib_preallocate_pages_for_all - pre-allocation for continuous memory type (all substreams)
  * @pcm: the pcm instance
  * @type: DMA type (SNDRV_DMA_TYPE_*)
- * @data: DMA type dependant data
+ * @data: DMA type dependent data
  * @size: the requested pre-allocation size in bytes
  * @max: the max. allowed pre-allocation size
  *
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index fe5c8036beb..1a07750f383 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -460,7 +460,7 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
 				   PM_QOS_CPU_DMA_LATENCY, usecs);
 	return 0;
  _error:
-	/* hardware might be unuseable from this time,
+	/* hardware might be unusable from this time,
 	   so we force application to retry to set
 	   the correct hardware parameter settings */
 	runtime->status->state = SNDRV_PCM_STATE_OPEN;
diff --git a/sound/core/seq/seq_dummy.c b/sound/core/seq/seq_dummy.c
index f3bdc54b429..1d7d90ca455 100644
--- a/sound/core/seq/seq_dummy.c
+++ b/sound/core/seq/seq_dummy.c
@@ -50,7 +50,7 @@
 
 	option snd-seq-dummy ports=4
 
-  The modle option "duplex=1" enables duplex operation to the port.
+  The model option "duplex=1" enables duplex operation to the port.
   In duplex mode, a pair of ports are created instead of single port,
   and events are tunneled between pair-ports.  For example, input to
   port A is sent to output port of another port B and vice versa.
diff --git a/sound/core/vmaster.c b/sound/core/vmaster.c
index a89948ae9e8..a39d3d8c2f9 100644
--- a/sound/core/vmaster.c
+++ b/sound/core/vmaster.c
@@ -233,7 +233,7 @@ static void slave_free(struct snd_kcontrol *kcontrol)
  * Add a slave control to the group with the given master control
  *
  * All slaves must be the same type (returning the same information
- * via info callback).  The fucntion doesn't check it, so it's your
+ * via info callback).  The function doesn't check it, so it's your
  * responsibility.
  *
  * Also, some additional limitations:
diff --git a/sound/drivers/pcm-indirect2.c b/sound/drivers/pcm-indirect2.c
index 3c93c23e488..e73fafd761b 100644
--- a/sound/drivers/pcm-indirect2.c
+++ b/sound/drivers/pcm-indirect2.c
@@ -264,7 +264,7 @@ snd_pcm_indirect2_playback_transfer(struct snd_pcm_substream *substream,
 		if (diff < -(snd_pcm_sframes_t) (runtime->boundary / 2))
 			diff += runtime->boundary;
 		/* number of bytes "added" by ALSA increases the number of
-		 * bytes which are ready to "be transfered to HW"/"played"
+		 * bytes which are ready to "be transferred to HW"/"played"
 		 * Then, set rec->appl_ptr to not count bytes twice next time.
 		 */
 		rec->sw_ready += (int)frames_to_bytes(runtime, diff);
@@ -330,7 +330,7 @@ snd_pcm_indirect2_playback_transfer(struct snd_pcm_substream *substream,
 		/* copy bytes from intermediate buffer position sw_data to the
 		 * HW and return number of bytes actually written
 		 * Furthermore, set hw_ready to 0, if the fifo isn't empty
-		 * now => more could be transfered to fifo
+		 * now => more could be transferred to fifo
 		 */
 		bytes = copy(substream, rec, bytes);
 		rec->bytes2hw += bytes;
diff --git a/sound/drivers/vx/vx_pcm.c b/sound/drivers/vx/vx_pcm.c
index 35a2f71a6af..5e897b236ce 100644
--- a/sound/drivers/vx/vx_pcm.c
+++ b/sound/drivers/vx/vx_pcm.c
@@ -1189,7 +1189,7 @@ void vx_pcm_update_intr(struct vx_core *chip, unsigned int events)
 
 
 /*
- * vx_init_audio_io - check the availabe audio i/o and allocate pipe arrays
+ * vx_init_audio_io - check the available audio i/o and allocate pipe arrays
  */
 static int vx_init_audio_io(struct vx_core *chip)
 {
diff --git a/sound/firewire/speakers.c b/sound/firewire/speakers.c
index 0fce9218abb..5466de8527b 100644
--- a/sound/firewire/speakers.c
+++ b/sound/firewire/speakers.c
@@ -778,10 +778,9 @@ static int __devexit fwspk_remove(struct device *dev)
 {
 	struct fwspk *fwspk = dev_get_drvdata(dev);
 
-	snd_card_disconnect(fwspk->card);
-
 	mutex_lock(&fwspk->mutex);
 	amdtp_out_stream_pcm_abort(&fwspk->stream);
+	snd_card_disconnect(fwspk->card);
 	fwspk_stop_stream(fwspk);
 	mutex_unlock(&fwspk->mutex);
 
diff --git a/sound/isa/sb/emu8000.c b/sound/isa/sb/emu8000.c
index 0c40951b652..5d61f5a2913 100644
--- a/sound/isa/sb/emu8000.c
+++ b/sound/isa/sb/emu8000.c
@@ -370,7 +370,7 @@ init_arrays(struct snd_emu8000 *emu)
 
 /*
  * Size the onboard memory.
- * This is written so as not to need arbitary delays after the write. It
+ * This is written so as not to need arbitrary delays after the write. It
  * seems that the only way to do this is to use the one channel and keep
  * reallocating between read and write.
  */
diff --git a/sound/isa/wavefront/wavefront_midi.c b/sound/isa/wavefront/wavefront_midi.c
index f14a7c0b699..65329f3abc3 100644
--- a/sound/isa/wavefront/wavefront_midi.c
+++ b/sound/isa/wavefront/wavefront_midi.c
@@ -537,7 +537,7 @@ snd_wavefront_midi_start (snd_wavefront_card_t *card)
 	}
 
 	/* Turn on Virtual MIDI, but first *always* turn it off,
-	   since otherwise consectutive reloads of the driver will
+	   since otherwise consecutive reloads of the driver will
 	   never cause the hardware to generate the initial "internal" or 
 	   "external" source bytes in the MIDI data stream. This
 	   is pretty important, since the internal hardware generally will
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 9191b32d913..2a42cc37795 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -424,7 +424,7 @@ void snd_wss_mce_down(struct snd_wss *chip)
 
 	/*
 	 * Wait for (possible -- during init auto-calibration may not be set)
-	 * calibration process to start. Needs upto 5 sample periods on AD1848
+	 * calibration process to start. Needs up to 5 sample periods on AD1848
 	 * which at the slowest possible rate of 5.5125 kHz means 907 us.
 	 */
 	msleep(1);
diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
index 854c303264d..0cd23d94888 100644
--- a/sound/oss/ac97_codec.c
+++ b/sound/oss/ac97_codec.c
@@ -28,7 +28,7 @@
  *
  * History
  * May 02, 2003 Liam Girdwood <lrg@slimlogic.co.uk>
- *	Removed non existant WM9700
+ *	Removed non existent WM9700
  *	Added support for WM9705, WM9708, WM9709, WM9710, WM9711
  *	WM9712 and WM9717
  * Mar 28, 2002 Randolph Bentson <bentson@holmsjoen.com>
@@ -441,7 +441,7 @@ static void ac97_set_mixer(struct ac97_codec *codec, unsigned int oss_mixer, uns
 }
 
 /* read or write the recmask, the ac97 can really have left and right recording
-   inputs independantly set, but OSS doesn't seem to want us to express that to
+   inputs independently set, but OSS doesn't seem to want us to express that to
    the user. the caller guarantees that we have a supported bit set, and they
    must be holding the card's spinlock */
 static int ac97_recmask_io(struct ac97_codec *codec, int rw, int mask) 
@@ -754,7 +754,7 @@ int ac97_probe_codec(struct ac97_codec *codec)
 	if((codec->codec_ops == &null_ops) && (f & 4))
 		codec->codec_ops = &default_digital_ops;
 	
-	/* A device which thinks its a modem but isnt */
+	/* A device which thinks its a modem but isn't */
 	if(codec->flags & AC97_DELUDED_MODEM)
 		codec->modem = 0;
 		
diff --git a/sound/oss/audio.c b/sound/oss/audio.c
index 7df48a25c4e..4b958b1c497 100644
--- a/sound/oss/audio.c
+++ b/sound/oss/audio.c
@@ -514,7 +514,7 @@ int audio_ioctl(int dev, struct file *file, unsigned int cmd, void __user *arg)
 				count += dmap->bytes_in_use;	/* Pointer wrap not handled yet */
 			count += dmap->byte_counter;
 		
-			/* Substract current count from the number of bytes written by app */
+			/* Subtract current count from the number of bytes written by app */
 			count = dmap->user_counter - count;
 			if (count < 0)
 				count = 0;
@@ -931,7 +931,7 @@ static int dma_ioctl(int dev, unsigned int cmd, void __user *arg)
 			if (count < dmap_out->fragment_size && dmap_out->qhead != 0)
 				count += dmap_out->bytes_in_use;	/* Pointer wrap not handled yet */
 			count += dmap_out->byte_counter;
-			/* Substract current count from the number of bytes written by app */
+			/* Subtract current count from the number of bytes written by app */
 			count = dmap_out->user_counter - count;
 			if (count < 0)
 				count = 0;
diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c
index 87e2c72651f..c918313c220 100644
--- a/sound/oss/dmasound/dmasound_core.c
+++ b/sound/oss/dmasound/dmasound_core.c
@@ -1021,7 +1021,7 @@ static int sq_ioctl(struct file *file, u_int cmd, u_long arg)
 	case SNDCTL_DSP_SYNC:
 		/* This call, effectively, has the same behaviour as SNDCTL_DSP_RESET
 		   except that it waits for output to finish before resetting
-		   everything - read, however, is killed imediately.
+		   everything - read, however, is killed immediately.
 		*/
 		result = 0 ;
 		if (file->f_mode & FMODE_WRITE) {
diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c
index ceedb1eff20..8cdb2cfe65c 100644
--- a/sound/oss/midibuf.c
+++ b/sound/oss/midibuf.c
@@ -295,7 +295,7 @@ int MIDIbuf_write(int dev, struct file *file, const char __user *buf, int count)
 
 		for (i = 0; i < n; i++)
 		{
-			/* BROKE BROKE BROKE - CANT DO THIS WITH CLI !! */
+			/* BROKE BROKE BROKE - CAN'T DO THIS WITH CLI !! */
 			/* yes, think the same, so I removed the cli() brackets 
 				QUEUE_BYTE is protected against interrupts */
 			if (copy_from_user((char *) &tmp_data, &(buf)[c], 1)) {
diff --git a/sound/oss/sb_card.c b/sound/oss/sb_card.c
index 84ef4d06c1c..fb5d7250de3 100644
--- a/sound/oss/sb_card.c
+++ b/sound/oss/sb_card.c
@@ -1,7 +1,7 @@
 /*
  * sound/oss/sb_card.c
  *
- * Detection routine for the ISA Sound Blaster and compatable sound
+ * Detection routine for the ISA Sound Blaster and compatible sound
  * cards.
  *
  * This file is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c
index 9890cf2066f..5c773dff5ac 100644
--- a/sound/oss/sb_ess.c
+++ b/sound/oss/sb_ess.c
@@ -168,7 +168,7 @@
  * corresponding playback levels, unless recmask says they aren't recorded. In
  * the latter case the recording volumes are 0.
  * Now recording levels of inputs can be controlled, by changing the playback
- * levels. Futhermore several devices can be recorded together (which is not
+ * levels. Furthermore several devices can be recorded together (which is not
  * possible with the ES1688).
  * Besides the separate recording level control for each input, the common
  * recording level can also be controlled by RECLEV as described above.
diff --git a/sound/oss/swarm_cs4297a.c b/sound/oss/swarm_cs4297a.c
index 44357d877a2..09d46484bc1 100644
--- a/sound/oss/swarm_cs4297a.c
+++ b/sound/oss/swarm_cs4297a.c
@@ -875,7 +875,7 @@ static void start_adc(struct cs4297a_state *s)
 		if (s->prop_adc.fmt & AFMT_S8 || s->prop_adc.fmt & AFMT_U8) {
 			// 
 			// now only use 16 bit capture, due to truncation issue
-			// in the chip, noticable distortion occurs.
+			// in the chip, noticeable distortion occurs.
 			// allocate buffer and then convert from 16 bit to 
 			// 8 bit for the user buffer.
 			//
diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c
index f0e0caa5320..12ba28e7b93 100644
--- a/sound/oss/vidc.c
+++ b/sound/oss/vidc.c
@@ -227,7 +227,7 @@ static int vidc_audio_set_speed(int dev, int rate)
 		} else {
 			/*printk("VIDC: internal %d %d %d\n", rate, rate_int, hwrate);*/
 			hwctrl=0x00000003;
-			/* Allow rougly 0.4% tolerance */
+			/* Allow roughly 0.4% tolerance */
 			if (diff_int > (rate/256))
 				rate=rate_int;
 		}
diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c
index 4382d0fa6b9..d8f6fd65ebb 100644
--- a/sound/pci/ad1889.c
+++ b/sound/pci/ad1889.c
@@ -29,7 +29,7 @@
  *	PM support
  *	MIDI support
  *	Game Port support
- *	SG DMA support (this will need *alot* of work)
+ *	SG DMA support (this will need *a lot* of work)
  */
 
 #include <linux/init.h>
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index f53a31e939c..f8ccc9677c6 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -963,7 +963,7 @@ static int snd_card_asihpi_playback_open(struct snd_pcm_substream *substream)
 
 	/*? also check ASI5000 samplerate source
 	    If external, only support external rate.
-	    If internal and other stream playing, cant switch
+	    If internal and other stream playing, can't switch
 	*/
 
 	init_timer(&dpcm->timer);
diff --git a/sound/pci/asihpi/hpi.h b/sound/pci/asihpi/hpi.h
index 6fc025c448d..255429c32c1 100644
--- a/sound/pci/asihpi/hpi.h
+++ b/sound/pci/asihpi/hpi.h
@@ -725,7 +725,7 @@ enum HPI_AESEBU_ERRORS {
 #define HPI_PAD_TITLE_LEN               64
 /** The text string containing the comment. */
 #define HPI_PAD_COMMENT_LEN             256
-/** The PTY when the tuner has not recieved any PTY. */
+/** The PTY when the tuner has not received any PTY. */
 #define HPI_PAD_PROGRAM_TYPE_INVALID    0xffff
 /** \} */
 
diff --git a/sound/pci/asihpi/hpi6000.c b/sound/pci/asihpi/hpi6000.c
index 3e3c2ef6efd..8c8aac4c567 100644
--- a/sound/pci/asihpi/hpi6000.c
+++ b/sound/pci/asihpi/hpi6000.c
@@ -423,7 +423,7 @@ static void subsys_create_adapter(struct hpi_message *phm,
 
 	ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL);
 	if (!ao.priv) {
-		HPI_DEBUG_LOG(ERROR, "cant get mem for adapter object\n");
+		HPI_DEBUG_LOG(ERROR, "can't get mem for adapter object\n");
 		phr->error = HPI_ERROR_MEMORY_ALLOC;
 		return;
 	}
diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index 620525bdac5..22e9f08dea6 100644
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -466,7 +466,7 @@ static void subsys_create_adapter(struct hpi_message *phm,
 
 	ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL);
 	if (!ao.priv) {
-		HPI_DEBUG_LOG(ERROR, "cant get mem for adapter object\n");
+		HPI_DEBUG_LOG(ERROR, "can't get mem for adapter object\n");
 		phr->error = HPI_ERROR_MEMORY_ALLOC;
 		return;
 	}
diff --git a/sound/pci/asihpi/hpi_internal.h b/sound/pci/asihpi/hpi_internal.h
index af678be0aa1..3b9fd115da3 100644
--- a/sound/pci/asihpi/hpi_internal.h
+++ b/sound/pci/asihpi/hpi_internal.h
@@ -607,7 +607,7 @@ struct hpi_data_compat32 {
 #endif
 
 struct hpi_buffer {
-  /** placehoder for backward compatability (see dwBufferSize) */
+  /** placehoder for backward compatibility (see dwBufferSize) */
 	struct hpi_msg_format reserved;
 	u32 command; /**< HPI_BUFFER_CMD_xxx*/
 	u32 pci_address; /**< PCI physical address of buffer for DSP DMA */
diff --git a/sound/pci/asihpi/hpimsgx.c b/sound/pci/asihpi/hpimsgx.c
index bcbdf30a6aa..360028b9abf 100644
--- a/sound/pci/asihpi/hpimsgx.c
+++ b/sound/pci/asihpi/hpimsgx.c
@@ -722,7 +722,7 @@ static u16 HPIMSGX__init(struct hpi_message *phm,
 		return phr->error;
 	}
 	if (hr.error == 0) {
-		/* the adapter was created succesfully
+		/* the adapter was created successfully
 		   save the mapping for future use */
 		hpi_entry_points[hr.u.s.adapter_index] = entry_point_func;
 		/* prepare adapter (pre-open streams etc.) */
diff --git a/sound/pci/au88x0/au88x0.h b/sound/pci/au88x0/au88x0.h
index ecb8f4daf40..02f6e08f759 100644
--- a/sound/pci/au88x0/au88x0.h
+++ b/sound/pci/au88x0/au88x0.h
@@ -104,7 +104,7 @@
 #define MIX_PLAYB(x) (vortex->mixplayb[x])
 #define MIX_SPDIF(x) (vortex->mixspdif[x])
 
-#define NR_WTPB 0x20		/* WT channels per eahc bank. */
+#define NR_WTPB 0x20		/* WT channels per each bank. */
 
 /* Structs */
 typedef struct {
diff --git a/sound/pci/au88x0/au88x0_a3d.c b/sound/pci/au88x0/au88x0_a3d.c
index f4aa8ff6f5f..9ae8b3b1765 100644
--- a/sound/pci/au88x0/au88x0_a3d.c
+++ b/sound/pci/au88x0/au88x0_a3d.c
@@ -53,7 +53,7 @@ a3dsrc_GetTimeConsts(a3dsrc_t * a, short *HrtfTrack, short *ItdTrack,
 }
 
 #endif
-/* Atmospheric absorbtion. */
+/* Atmospheric absorption. */
 
 static void
 a3dsrc_SetAtmosTarget(a3dsrc_t * a, short aa, short b, short c, short d,
@@ -835,7 +835,7 @@ snd_vortex_a3d_filter_put(struct snd_kcontrol *kcontrol,
 		params[i] = ucontrol->value.integer.value[i];
 	/* Translate generic filter params to a3d filter params. */
 	vortex_a3d_translate_filter(a->filter, params);
-	/* Atmospheric absorbtion and filtering. */
+	/* Atmospheric absorption and filtering. */
 	a3dsrc_SetAtmosTarget(a, a->filter[0],
 			      a->filter[1], a->filter[2],
 			      a->filter[3], a->filter[4]);
diff --git a/sound/pci/au88x0/au88x0_pcm.c b/sound/pci/au88x0/au88x0_pcm.c
index 5439d662d10..62e959120c4 100644
--- a/sound/pci/au88x0/au88x0_pcm.c
+++ b/sound/pci/au88x0/au88x0_pcm.c
@@ -44,10 +44,10 @@ static struct snd_pcm_hardware snd_vortex_playback_hw_adb = {
 	.channels_min = 1,
 	.channels_max = 2,
 	.buffer_bytes_max = 0x10000,
-	.period_bytes_min = 0x1,
+	.period_bytes_min = 0x20,
 	.period_bytes_max = 0x1000,
 	.periods_min = 2,
-	.periods_max = 32,
+	.periods_max = 1024,
 };
 
 #ifndef CHIP_AU8820
@@ -140,6 +140,9 @@ static int snd_vortex_pcm_open(struct snd_pcm_substream *substream)
 					SNDRV_PCM_HW_PARAM_PERIOD_BYTES)) < 0)
 		return err;
 
+	snd_pcm_hw_constraint_step(runtime, 0,
+					SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 64);
+
 	if (VORTEX_PCM_TYPE(substream->pcm) != VORTEX_PCM_WT) {
 #ifndef CHIP_AU8820
 		if (VORTEX_PCM_TYPE(substream->pcm) == VORTEX_PCM_A3D) {
@@ -515,7 +518,7 @@ static int __devinit snd_vortex_new_pcm(vortex_t *chip, int idx, int nr)
 		return -ENODEV;
 
 	/* idx indicates which kind of PCM device. ADB, SPDIF, I2S and A3D share the 
-	 * same dma engine. WT uses it own separate dma engine whcih cant capture. */
+	 * same dma engine. WT uses it own separate dma engine which can't capture. */
 	if (idx == VORTEX_PCM_ADB)
 		nr_capt = nr;
 	else
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 5715c4d0557..9b7a6346037 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -140,7 +140,7 @@
  *  Possible remedies:
  *  - use speaker (amplifier) output instead of headphone output
  *    (in case crackling is due to overloaded output clipping)
- *  - plug card into a different PCI slot, preferrably one that isn't shared
+ *  - plug card into a different PCI slot, preferably one that isn't shared
  *    too much (this helps a lot, but not completely!)
  *  - get rid of PCI VGA card, use AGP instead
  *  - upgrade or downgrade BIOS
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index fc53b9bca26..e8e8ccc9640 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -51,7 +51,7 @@
  *    Add support for mute control on SB Live 24bit (cards w/ SPI DAC)
  *
  *
- *  This code was initally based on code from ALSA's emu10k1x.c which is:
+ *  This code was initially based on code from ALSA's emu10k1x.c which is:
  *  Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -175,7 +175,7 @@
 /* CA0106 pointer-offset register set, accessed through the PTR and DATA registers                     */
 /********************************************************************************************************/
                                                                                                                            
-/* Initally all registers from 0x00 to 0x3f have zero contents. */
+/* Initially all registers from 0x00 to 0x3f have zero contents. */
 #define PLAYBACK_LIST_ADDR	0x00		/* Base DMA address of a list of pointers to each period/size */
 						/* One list entry: 4 bytes for DMA address, 
 						 * 4 bytes for period_size << 16.
@@ -223,7 +223,7 @@
  * The jack has 4 poles. I will call 1 - Tip, 2 - Next to 1, 3 - Next to 2, 4 - Next to 3
  * For Analogue: 1 -> Center Speaker, 2 -> Sub Woofer, 3 -> Ground, 4 -> Ground
  * For Digital: 1 -> Front SPDIF, 2 -> Rear SPDIF, 3 -> Center/Subwoofer SPDIF, 4 -> Ground.
- * Standard 4 pole Video A/V cable with RCA outputs: 1 -> White, 2 -> Yellow, 3 -> Sheild on all three, 4 -> Red.
+ * Standard 4 pole Video A/V cable with RCA outputs: 1 -> White, 2 -> Yellow, 3 -> Shield on all three, 4 -> Red.
  * So, from this you can see that you cannot use a Standard 4 pole Video A/V cable with the SB Audigy LS card.
  */
 /* The Front SPDIF PCM gets mixed with samples from the AC97 codec, so can only work for Stereo PCM and not AC3/DTS
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 01b49388faf..43775923969 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -117,7 +117,7 @@
  *    DAC: Unknown
  *    Trying to handle it like the SB0410.
  *
- *  This code was initally based on code from ALSA's emu10k1x.c which is:
+ *  This code was initially based on code from ALSA's emu10k1x.c which is:
  *  Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
  *
  *   This program is free software; you can redistribute it and/or modify
diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c
index 630aa499818..84f3f92436b 100644
--- a/sound/pci/ca0106/ca0106_mixer.c
+++ b/sound/pci/ca0106/ca0106_mixer.c
@@ -42,7 +42,7 @@
  *  0.0.18
  *    Add support for mute control on SB Live 24bit (cards w/ SPI DAC)
  *
- *  This code was initally based on code from ALSA's emu10k1x.c which is:
+ *  This code was initially based on code from ALSA's emu10k1x.c which is:
  *  Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
  *
  *   This program is free software; you can redistribute it and/or modify
diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c
index ba96428c9f4..c694464b116 100644
--- a/sound/pci/ca0106/ca0106_proc.c
+++ b/sound/pci/ca0106/ca0106_proc.c
@@ -42,7 +42,7 @@
  *  0.0.18
  *    Implement support for Line-in capture on SB Live 24bit.
  *
- *  This code was initally based on code from ALSA's emu10k1x.c which is:
+ *  This code was initially based on code from ALSA's emu10k1x.c which is:
  *  Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
  *
  *   This program is free software; you can redistribute it and/or modify
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index b5bb036ef73..f4e573555da 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -73,7 +73,7 @@ MODULE_PARM_DESC(mpu_port, "MPU-401 port.");
 module_param_array(fm_port, long, NULL, 0444);
 MODULE_PARM_DESC(fm_port, "FM port.");
 module_param_array(soft_ac3, bool, NULL, 0444);
-MODULE_PARM_DESC(soft_ac3, "Sofware-conversion of raw SPDIF packets (model 033 only).");
+MODULE_PARM_DESC(soft_ac3, "Software-conversion of raw SPDIF packets (model 033 only).");
 #ifdef SUPPORT_JOYSTICK
 module_param_array(joystick_port, int, NULL, 0444);
 MODULE_PARM_DESC(joystick_port, "Joystick port address.");
@@ -656,8 +656,8 @@ out:
 }
 
 /*
- * Program pll register bits, I assume that the 8 registers 0xf8 upto 0xff
- * are mapped onto the 8 ADC/DAC sampling frequency which can be choosen
+ * Program pll register bits, I assume that the 8 registers 0xf8 up to 0xff
+ * are mapped onto the 8 ADC/DAC sampling frequency which can be chosen
  * at the register CM_REG_FUNCTRL1 (0x04).
  * Problem: other ways are also possible (any information about that?)
  */
@@ -666,7 +666,7 @@ static void snd_cmipci_set_pll(struct cmipci *cm, unsigned int rate, unsigned in
 	unsigned int reg = CM_REG_PLL + slot;
 	/*
 	 * Guess that this programs at reg. 0x04 the pos 15:13/12:10
-	 * for DSFC/ASFC (000 upto 111).
+	 * for DSFC/ASFC (000 up to 111).
 	 */
 
 	/* FIXME: Init (Do we've to set an other register first before programming?) */
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index b9321544c31..13f33c0719d 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -1627,7 +1627,7 @@ static struct ct_atc atc_preset __devinitdata = {
  *  Creates and initializes a hardware manager.
  *
  *  Creates kmallocated ct_atc structure. Initializes hardware.
- *  Returns 0 if suceeds, or negative error code if fails.
+ *  Returns 0 if succeeds, or negative error code if fails.
  */
 
 int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
index 0cf400f879f..a5c957db5ce 100644
--- a/sound/pci/ctxfi/cthw20k1.c
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -1285,7 +1285,7 @@ static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
 	hw_write_20kx(hw, PTPALX, ptp_phys_low);
 	hw_write_20kx(hw, PTPAHX, ptp_phys_high);
 	hw_write_20kx(hw, TRNCTL, trnctl);
-	hw_write_20kx(hw, TRNIS, 0x200c01); /* realy needed? */
+	hw_write_20kx(hw, TRNIS, 0x200c01); /* really needed? */
 
 	return 0;
 }
diff --git a/sound/pci/emu10k1/memory.c b/sound/pci/emu10k1/memory.c
index 957a311514c..c250614dadd 100644
--- a/sound/pci/emu10k1/memory.c
+++ b/sound/pci/emu10k1/memory.c
@@ -248,7 +248,7 @@ static int is_valid_page(struct snd_emu10k1 *emu, dma_addr_t addr)
 /*
  * map the given memory block on PTB.
  * if the block is already mapped, update the link order.
- * if no empty pages are found, tries to release unsed memory blocks
+ * if no empty pages are found, tries to release unused memory blocks
  * and retry the mapping.
  */
 int snd_emu10k1_memblk_map(struct snd_emu10k1 *emu, struct snd_emu10k1_memblk *blk)
diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c
index 61b8ab39800..a81dc44228e 100644
--- a/sound/pci/emu10k1/p16v.c
+++ b/sound/pci/emu10k1/p16v.c
@@ -69,7 +69,7 @@
  *    ADC: Philips 1361T (Stereo 24bit)
  *    DAC: CS4382-K (8-channel, 24bit, 192Khz)
  *
- *  This code was initally based on code from ALSA's emu10k1x.c which is:
+ *  This code was initially based on code from ALSA's emu10k1x.c which is:
  *  Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
  *
  *   This program is free software; you can redistribute it and/or modify
diff --git a/sound/pci/emu10k1/p16v.h b/sound/pci/emu10k1/p16v.h
index 00f4817533b..4e0ee1a9747 100644
--- a/sound/pci/emu10k1/p16v.h
+++ b/sound/pci/emu10k1/p16v.h
@@ -59,7 +59,7 @@
  *    ADC: Philips 1361T (Stereo 24bit)
  *    DAC: CS4382-K (8-channel, 24bit, 192Khz)
  *
- *  This code was initally based on code from ALSA's emu10k1x.c which is:
+ *  This code was initially based on code from ALSA's emu10k1x.c which is:
  *  Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -86,7 +86,7 @@
  * The sample rate is also controlled by the same registers that control the rate of the EMU10K2 sample rate converters.
  */
 
-/* Initally all registers from 0x00 to 0x3f have zero contents. */
+/* Initially all registers from 0x00 to 0x3f have zero contents. */
 #define PLAYBACK_LIST_ADDR	0x00		/* Base DMA address of a list of pointers to each period/size */
 						/* One list entry: 4 bytes for DMA address, 
 						 * 4 bytes for period_size << 16.
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 537cfba829a..863eafea691 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -229,6 +229,7 @@ MODULE_PARM_DESC(lineio, "Line In to Rear Out (0 = auto, 1 = force).");
 #define ES_REG_1371_CODEC 0x14	/* W/R: Codec Read/Write register address */
 #define   ES_1371_CODEC_RDY	   (1<<31)	/* codec ready */
 #define   ES_1371_CODEC_WIP	   (1<<30)	/* codec register access in progress */
+#define   EV_1938_CODEC_MAGIC	   (1<<26)
 #define   ES_1371_CODEC_PIRD	   (1<<23)	/* codec read/write select register */
 #define   ES_1371_CODEC_WRITE(a,d) ((((a)&0x7f)<<16)|(((d)&0xffff)<<0))
 #define   ES_1371_CODEC_READS(a)   ((((a)&0x7f)<<16)|ES_1371_CODEC_PIRD)
@@ -603,12 +604,18 @@ static void snd_es1370_codec_write(struct snd_ak4531 *ak4531,
 
 #ifdef CHIP1371
 
+static inline bool is_ev1938(struct ensoniq *ensoniq)
+{
+	return ensoniq->pci->device == 0x8938;
+}
+
 static void snd_es1371_codec_write(struct snd_ac97 *ac97,
 				   unsigned short reg, unsigned short val)
 {
 	struct ensoniq *ensoniq = ac97->private_data;
-	unsigned int t, x;
+	unsigned int t, x, flag;
 
+	flag = is_ev1938(ensoniq) ? EV_1938_CODEC_MAGIC : 0;
 	mutex_lock(&ensoniq->src_mutex);
 	for (t = 0; t < POLL_COUNT; t++) {
 		if (!(inl(ES_REG(ensoniq, 1371_CODEC)) & ES_1371_CODEC_WIP)) {
@@ -630,7 +637,8 @@ static void snd_es1371_codec_write(struct snd_ac97 *ac97,
 				    0x00010000)
 					break;
 			}
-			outl(ES_1371_CODEC_WRITE(reg, val), ES_REG(ensoniq, 1371_CODEC));
+			outl(ES_1371_CODEC_WRITE(reg, val) | flag,
+			     ES_REG(ensoniq, 1371_CODEC));
 			/* restore SRC reg */
 			snd_es1371_wait_src_ready(ensoniq);
 			outl(x, ES_REG(ensoniq, 1371_SMPRATE));
@@ -647,8 +655,9 @@ static unsigned short snd_es1371_codec_read(struct snd_ac97 *ac97,
 					    unsigned short reg)
 {
 	struct ensoniq *ensoniq = ac97->private_data;
-	unsigned int t, x, fail = 0;
+	unsigned int t, x, flag, fail = 0;
 
+	flag = is_ev1938(ensoniq) ? EV_1938_CODEC_MAGIC : 0;
       __again:
 	mutex_lock(&ensoniq->src_mutex);
 	for (t = 0; t < POLL_COUNT; t++) {
@@ -671,7 +680,8 @@ static unsigned short snd_es1371_codec_read(struct snd_ac97 *ac97,
 				    0x00010000)
 					break;
 			}
-			outl(ES_1371_CODEC_READS(reg), ES_REG(ensoniq, 1371_CODEC));
+			outl(ES_1371_CODEC_READS(reg) | flag,
+			     ES_REG(ensoniq, 1371_CODEC));
 			/* restore SRC reg */
 			snd_es1371_wait_src_ready(ensoniq);
 			outl(x, ES_REG(ensoniq, 1371_SMPRATE));
@@ -683,6 +693,11 @@ static unsigned short snd_es1371_codec_read(struct snd_ac97 *ac97,
 			/* now wait for the stinkin' data (RDY) */
 			for (t = 0; t < POLL_COUNT; t++) {
 				if ((x = inl(ES_REG(ensoniq, 1371_CODEC))) & ES_1371_CODEC_RDY) {
+					if (is_ev1938(ensoniq)) {
+						for (t = 0; t < 100; t++)
+							inl(ES_REG(ensoniq, CONTROL));
+						x = inl(ES_REG(ensoniq, 1371_CODEC));
+					}
 					mutex_unlock(&ensoniq->src_mutex);
 					return ES_1371_CODEC_READ(x);
 				}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 2c79e96d032..759ade12e75 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -937,6 +937,7 @@ void snd_hda_shutup_pins(struct hda_codec *codec)
 }
 EXPORT_SYMBOL_HDA(snd_hda_shutup_pins);
 
+#ifdef SND_HDA_NEEDS_RESUME
 /* Restore the pin controls cleared previously via snd_hda_shutup_pins() */
 static void restore_shutup_pins(struct hda_codec *codec)
 {
@@ -953,6 +954,7 @@ static void restore_shutup_pins(struct hda_codec *codec)
 	}
 	codec->pins_shutup = 0;
 }
+#endif
 
 static void init_hda_cache(struct hda_cache_rec *cache,
 			   unsigned int record_size);
@@ -1329,6 +1331,7 @@ static void purify_inactive_streams(struct hda_codec *codec)
 	}
 }
 
+#ifdef SND_HDA_NEEDS_RESUME
 /* clean up all streams; called from suspend */
 static void hda_cleanup_all_streams(struct hda_codec *codec)
 {
@@ -1340,6 +1343,7 @@ static void hda_cleanup_all_streams(struct hda_codec *codec)
 			really_cleanup_stream(codec, p);
 	}
 }
+#endif
 
 /*
  * amp access functions
@@ -3661,7 +3665,7 @@ int snd_hda_codec_build_pcms(struct hda_codec *codec)
  * with the proper parameters for set up.
  * ops.cleanup should be called in hw_free for clean up of streams.
  *
- * This function returns 0 if successfull, or a negative error code.
+ * This function returns 0 if successful, or a negative error code.
  */
 int __devinit snd_hda_build_pcms(struct hda_bus *bus)
 {
@@ -4851,7 +4855,7 @@ EXPORT_SYMBOL_HDA(snd_hda_suspend);
  *
  * Returns 0 if successful.
  *
- * This fucntion is defined only when POWER_SAVE isn't set.
+ * This function is defined only when POWER_SAVE isn't set.
  * In the power-save mode, the codec is resumed dynamically.
  */
 int snd_hda_resume(struct hda_bus *bus)
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index d08cf31596f..ad97d937d3a 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3034,6 +3034,8 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21c6, "Thinkpad Edge 13", CXT5066_ASUS),
  	SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
+	SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT5066_THINKPAD),
+	SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT5066_THINKPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS),
 	SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */
 	{}
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 251773e45f6..715615a88a8 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1280,6 +1280,39 @@ static int simple_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					     stream_tag, format, substream);
 }
 
+static void nvhdmi_8ch_7x_set_info_frame_parameters(struct hda_codec *codec,
+						    int channels)
+{
+	unsigned int chanmask;
+	int chan = channels ? (channels - 1) : 1;
+
+	switch (channels) {
+	default:
+	case 0:
+	case 2:
+		chanmask = 0x00;
+		break;
+	case 4:
+		chanmask = 0x08;
+		break;
+	case 6:
+		chanmask = 0x0b;
+		break;
+	case 8:
+		chanmask = 0x13;
+		break;
+	}
+
+	/* Set the audio infoframe channel allocation and checksum fields.  The
+	 * channel count is computed implicitly by the hardware. */
+	snd_hda_codec_write(codec, 0x1, 0,
+			Nv_VERB_SET_Channel_Allocation, chanmask);
+
+	snd_hda_codec_write(codec, 0x1, 0,
+			Nv_VERB_SET_Info_Frame_Checksum,
+			(0x71 - chan - chanmask));
+}
+
 static int nvhdmi_8ch_7x_pcm_close(struct hda_pcm_stream *hinfo,
 				   struct hda_codec *codec,
 				   struct snd_pcm_substream *substream)
@@ -1298,6 +1331,10 @@ static int nvhdmi_8ch_7x_pcm_close(struct hda_pcm_stream *hinfo,
 				AC_VERB_SET_STREAM_FORMAT, 0);
 	}
 
+	/* The audio hardware sends a channel count of 0x7 (8ch) when all the
+	 * streams are disabled. */
+	nvhdmi_8ch_7x_set_info_frame_parameters(codec, 8);
+
 	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
 }
 
@@ -1308,37 +1345,16 @@ static int nvhdmi_8ch_7x_pcm_prepare(struct hda_pcm_stream *hinfo,
 				     struct snd_pcm_substream *substream)
 {
 	int chs;
-	unsigned int dataDCC1, dataDCC2, chan, chanmask, channel_id;
+	unsigned int dataDCC1, dataDCC2, channel_id;
 	int i;
 
 	mutex_lock(&codec->spdif_mutex);
 
 	chs = substream->runtime->channels;
-	chan = chs ? (chs - 1) : 1;
 
-	switch (chs) {
-	default:
-	case 0:
-	case 2:
-		chanmask = 0x00;
-		break;
-	case 4:
-		chanmask = 0x08;
-		break;
-	case 6:
-		chanmask = 0x0b;
-		break;
-	case 8:
-		chanmask = 0x13;
-		break;
-	}
 	dataDCC1 = AC_DIG1_ENABLE | AC_DIG1_COPYRIGHT;
 	dataDCC2 = 0x2;
 
-	/* set the Audio InforFrame Channel Allocation */
-	snd_hda_codec_write(codec, 0x1, 0,
-			Nv_VERB_SET_Channel_Allocation, chanmask);
-
 	/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
 	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
 		snd_hda_codec_write(codec,
@@ -1413,10 +1429,7 @@ static int nvhdmi_8ch_7x_pcm_prepare(struct hda_pcm_stream *hinfo,
 		}
 	}
 
-	/* set the Audio Info Frame Checksum */
-	snd_hda_codec_write(codec, 0x1, 0,
-			Nv_VERB_SET_Info_Frame_Checksum,
-			(0x71 - chan - chanmask));
+	nvhdmi_8ch_7x_set_info_frame_parameters(codec, chs);
 
 	mutex_unlock(&codec->spdif_mutex);
 	return 0;
@@ -1512,6 +1525,11 @@ static int patch_nvhdmi_8ch_7x(struct hda_codec *codec)
 	spec->multiout.max_channels = 8;
 	spec->pcm_playback = &nvhdmi_pcm_playback_8ch_7x;
 	codec->patch_ops = nvhdmi_patch_ops_8ch_7x;
+
+	/* Initialize the audio infoframe channel mask and checksum to something
+	 * valid */
+	nvhdmi_8ch_7x_set_info_frame_parameters(codec, 8);
+
 	return 0;
 }
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0ef0035fe99..c82979a8cd0 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -549,7 +549,7 @@ static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
 
 /*
  * Control the mode of pin widget settings via the mixer.  "pc" is used
- * instead of "%" to avoid consequences of accidently treating the % as
+ * instead of "%" to avoid consequences of accidentally treating the % as
  * being part of a format specifier.  Maximum allowed length of a value is
  * 63 characters plus NULL terminator.
  *
@@ -1704,11 +1704,11 @@ static void alc_apply_fixup(struct hda_codec *codec, int action)
 				   codec->chip_name, fix->type);
 			break;
 		}
-		if (!fix[id].chained)
+		if (!fix->chained)
 			break;
 		if (++depth > 10)
 			break;
-		id = fix[id].chain_id;
+		id = fix->chain_id;
 	}
 }
 
@@ -5645,6 +5645,7 @@ static void fillup_priv_adc_nids(struct hda_codec *codec, hda_nid_t *nids,
 static struct snd_pci_quirk beep_white_list[] = {
 	SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1),
 	SND_PCI_QUIRK(0x1043, 0x83ce, "EeePC", 1),
+	SND_PCI_QUIRK(0x1043, 0x831a, "EeePC", 1),
 	SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1),
 	{}
 };
@@ -9836,7 +9837,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 
-	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
+	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavilion", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
 	SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
 	SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
@@ -14116,7 +14117,7 @@ static hda_nid_t alc269vb_capsrc_nids[1] = {
 };
 
 static hda_nid_t alc269_adc_candidates[] = {
-	0x08, 0x09, 0x07,
+	0x08, 0x09, 0x07, 0x11,
 };
 
 #define alc269_modes		alc260_modes
@@ -14860,6 +14861,23 @@ static void alc269_fixup_hweq(struct hda_codec *codec,
 	alc_write_coef_idx(codec, 0x1e, coef | 0x80);
 }
 
+static void alc271_fixup_dmic(struct hda_codec *codec,
+			      const struct alc_fixup *fix, int action)
+{
+	static struct hda_verb verbs[] = {
+		{0x20, AC_VERB_SET_COEF_INDEX, 0x0d},
+		{0x20, AC_VERB_SET_PROC_COEF, 0x4000},
+		{}
+	};
+	unsigned int cfg;
+
+	if (strcmp(codec->chip_name, "ALC271X"))
+		return;
+	cfg = snd_hda_codec_get_pincfg(codec, 0x12);
+	if (get_defcfg_connect(cfg) == AC_JACK_PORT_FIXED)
+		snd_hda_sequence_write(codec, verbs);
+}
+
 enum {
 	ALC269_FIXUP_SONY_VAIO,
 	ALC275_FIXUP_SONY_VAIO_GPIO2,
@@ -14868,6 +14886,7 @@ enum {
 	ALC269_FIXUP_ASUS_G73JW,
 	ALC269_FIXUP_LENOVO_EAPD,
 	ALC275_FIXUP_SONY_HWEQ,
+	ALC271_FIXUP_DMIC,
 };
 
 static const struct alc_fixup alc269_fixups[] = {
@@ -14921,7 +14940,11 @@ static const struct alc_fixup alc269_fixups[] = {
 		.v.func = alc269_fixup_hweq,
 		.chained = true,
 		.chain_id = ALC275_FIXUP_SONY_VAIO_GPIO2
-	}
+	},
+	[ALC271_FIXUP_DMIC] = {
+		.type = ALC_FIXUP_FUNC,
+		.v.func = alc271_fixup_dmic,
+	},
 };
 
 static struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -14930,6 +14953,7 @@ static struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
 	SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
 	SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+	SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
@@ -19449,6 +19473,7 @@ enum {
 	ALC662_FIXUP_IDEAPAD,
 	ALC272_FIXUP_MARIO,
 	ALC662_FIXUP_CZC_P10T,
+	ALC662_FIXUP_SKU_IGNORE,
 };
 
 static const struct alc_fixup alc662_fixups[] = {
@@ -19477,10 +19502,15 @@ static const struct alc_fixup alc662_fixups[] = {
 			{}
 		}
 	},
+	[ALC662_FIXUP_SKU_IGNORE] = {
+		.type = ALC_FIXUP_SKU,
+		.v.sku = ALC_FIXUP_SKU_IGNORE,
+	},
 };
 
 static struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE),
+	SND_PCI_QUIRK(0x1025, 0x031c, "Gateway NV79", ALC662_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 05fcd60cc46..94d19c03a7f 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -2475,7 +2475,7 @@ static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol,
  
 	spec->hp_switch = ucontrol->value.integer.value[0] ? nid : 0;
 
-	/* check to be sure that the ports are upto date with
+	/* check to be sure that the ports are up to date with
 	 * switch changes
 	 */
 	stac_issue_unsol_event(codec, nid);
@@ -3408,6 +3408,9 @@ static int get_connection_index(struct hda_codec *codec, hda_nid_t mux,
 	hda_nid_t conn[HDA_MAX_NUM_INPUTS];
 	int i, nums;
 
+	if (!(get_wcaps(codec, mux) & AC_WCAP_CONN_LIST))
+		return -1;
+
 	nums = snd_hda_get_connections(codec, mux, conn, ARRAY_SIZE(conn));
 	for (i = 0; i < nums; i++)
 		if (conn[i] == nid)
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 1371b57c11e..0997031c48d 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1292,14 +1292,18 @@ static void notify_aa_path_ctls(struct hda_codec *codec)
 {
 	int i;
 	struct snd_ctl_elem_id id;
-	const char *labels[] = {"Mic", "Front Mic", "Line"};
+	const char *labels[] = {"Mic", "Front Mic", "Line", "Rear Mic"};
+	struct snd_kcontrol *ctl;
 
 	memset(&id, 0, sizeof(id));
 	id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
 	for (i = 0; i < ARRAY_SIZE(labels); i++) {
 		sprintf(id.name, "%s Playback Volume", labels[i]);
-		snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE,
-			       &id);
+		ctl = snd_hda_find_mixer_ctl(codec, id.name);
+		if (ctl)
+			snd_ctl_notify(codec->bus->card,
+					SNDRV_CTL_EVENT_MASK_VALUE,
+					&ctl->id);
 	}
 }
 
diff --git a/sound/pci/ice1712/aureon.c b/sound/pci/ice1712/aureon.c
index 2f6252266a0..3e4f8c12ffc 100644
--- a/sound/pci/ice1712/aureon.c
+++ b/sound/pci/ice1712/aureon.c
@@ -148,7 +148,7 @@ static void aureon_pca9554_write(struct snd_ice1712 *ice, unsigned char reg,
 	udelay(100);
 	/*
 	 * send device address, command and value,
-	 * skipping ack cycles inbetween
+	 * skipping ack cycles in between
 	 */
 	for (j = 0; j < 3; j++) {
 		switch (j) {
@@ -2143,7 +2143,7 @@ static int __devinit aureon_init(struct snd_ice1712 *ice)
 		ice->num_total_adcs = 2;
 	}
 
-	/* to remeber the register values of CS8415 */
+	/* to remember the register values of CS8415 */
 	ice->akm = kzalloc(sizeof(struct snd_akm4xxx), GFP_KERNEL);
 	if (!ice->akm)
 		return -ENOMEM;
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 4fc6d8bc637..f4594d76b6e 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2755,7 +2755,7 @@ static int __devinit snd_ice1712_probe(struct pci_dev *pci,
 			return err;
 		}
 		if (c->mpu401_1_name)
-			/*  Prefered name available in card_info */
+			/*  Preferred name available in card_info */
 			snprintf(ice->rmidi[0]->name,
 				 sizeof(ice->rmidi[0]->name),
 				 "%s %d", c->mpu401_1_name, card->number);
@@ -2772,7 +2772,7 @@ static int __devinit snd_ice1712_probe(struct pci_dev *pci,
 				return err;
 			}
 			if (c->mpu401_2_name)
-				/*  Prefered name available in card_info */
+				/*  Preferred name available in card_info */
 				snprintf(ice->rmidi[1]->name,
 					 sizeof(ice->rmidi[1]->name),
 					 "%s %d", c->mpu401_2_name,
diff --git a/sound/pci/ice1712/pontis.c b/sound/pci/ice1712/pontis.c
index cdb873f5da5..92c1160d7ab 100644
--- a/sound/pci/ice1712/pontis.c
+++ b/sound/pci/ice1712/pontis.c
@@ -768,7 +768,7 @@ static int __devinit pontis_init(struct snd_ice1712 *ice)
 	ice->num_total_dacs = 2;
 	ice->num_total_adcs = 2;
 
-	/* to remeber the register values */
+	/* to remember the register values */
 	ice->akm = kzalloc(sizeof(struct snd_akm4xxx), GFP_KERNEL);
 	if (! ice->akm)
 		return -ENOMEM;
diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c
index 6a9fee3ee78..764cc93dbca 100644
--- a/sound/pci/ice1712/prodigy_hifi.c
+++ b/sound/pci/ice1712/prodigy_hifi.c
@@ -1046,7 +1046,7 @@ static int __devinit prodigy_hifi_init(struct snd_ice1712 *ice)
 	* don't call snd_ice1712_gpio_get/put(), otherwise it's overwritten
 	*/
 	ice->gpio.saved[0] = 0;
-	/* to remeber the register values */
+	/* to remember the register values */
 
 	ice->akm = kzalloc(sizeof(struct snd_akm4xxx), GFP_KERNEL);
 	if (! ice->akm)
@@ -1128,7 +1128,7 @@ static int __devinit prodigy_hd2_init(struct snd_ice1712 *ice)
 	* don't call snd_ice1712_gpio_get/put(), otherwise it's overwritten
 	*/
 	ice->gpio.saved[0] = 0;
-	/* to remeber the register values */
+	/* to remember the register values */
 
 	ice->akm = kzalloc(sizeof(struct snd_akm4xxx), GFP_KERNEL);
 	if (! ice->akm)
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 629a5494347..6c896dbfd79 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -534,7 +534,7 @@ static int snd_intel8x0_codec_semaphore(struct intel8x0 *chip, unsigned int code
 		udelay(10);
 	} while (time--);
 
-	/* access to some forbidden (non existant) ac97 registers will not
+	/* access to some forbidden (non existent) ac97 registers will not
 	 * reset the semaphore. So even if you don't get the semaphore, still
 	 * continue the access. We don't need the semaphore anyway. */
 	snd_printk(KERN_ERR "codec_semaphore: semaphore is not ready [0x%x][0x%x]\n",
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 2ae8d29500a..27709f0cd2a 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -331,7 +331,7 @@ static int snd_intel8x0m_codec_semaphore(struct intel8x0m *chip, unsigned int co
 		udelay(10);
 	} while (time--);
 
-	/* access to some forbidden (non existant) ac97 registers will not
+	/* access to some forbidden (non existent) ac97 registers will not
 	 * reset the semaphore. So even if you don't get the semaphore, still
 	 * continue the access. We don't need the semaphore anyway. */
 	snd_printk(KERN_ERR "codec_semaphore: semaphore is not ready [0x%x][0x%x]\n",
diff --git a/sound/pci/mixart/mixart_core.c b/sound/pci/mixart/mixart_core.c
index d3350f38396..3df0f530f67 100644
--- a/sound/pci/mixart/mixart_core.c
+++ b/sound/pci/mixart/mixart_core.c
@@ -265,7 +265,7 @@ int snd_mixart_send_msg(struct mixart_mgr *mgr, struct mixart_msg *request, int
 	if (! timeout) {
 		/* error - no ack */
 		mutex_unlock(&mgr->msg_mutex);
-		snd_printk(KERN_ERR "error: no reponse on msg %x\n", msg_frame);
+		snd_printk(KERN_ERR "error: no response on msg %x\n", msg_frame);
 		return -EIO;
 	}
 
@@ -278,7 +278,7 @@ int snd_mixart_send_msg(struct mixart_mgr *mgr, struct mixart_msg *request, int
 	err = get_msg(mgr, &resp, msg_frame);
 
 	if( request->message_id != resp.message_id )
-		snd_printk(KERN_ERR "REPONSE ERROR!\n");
+		snd_printk(KERN_ERR "RESPONSE ERROR!\n");
 
 	mutex_unlock(&mgr->msg_mutex);
 	return err;
diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c
index 833e7180ad2..304411c1fe4 100644
--- a/sound/pci/pcxhr/pcxhr_core.c
+++ b/sound/pci/pcxhr/pcxhr_core.c
@@ -1042,11 +1042,11 @@ void pcxhr_msg_tasklet(unsigned long arg)
 	int i, j;
 
 	if (mgr->src_it_dsp & PCXHR_IRQ_FREQ_CHANGE)
-		snd_printdd("TASKLET : PCXHR_IRQ_FREQ_CHANGE event occured\n");
+		snd_printdd("TASKLET : PCXHR_IRQ_FREQ_CHANGE event occurred\n");
 	if (mgr->src_it_dsp & PCXHR_IRQ_TIME_CODE)
-		snd_printdd("TASKLET : PCXHR_IRQ_TIME_CODE event occured\n");
+		snd_printdd("TASKLET : PCXHR_IRQ_TIME_CODE event occurred\n");
 	if (mgr->src_it_dsp & PCXHR_IRQ_NOTIFY)
-		snd_printdd("TASKLET : PCXHR_IRQ_NOTIFY event occured\n");
+		snd_printdd("TASKLET : PCXHR_IRQ_NOTIFY event occurred\n");
 	if (mgr->src_it_dsp & (PCXHR_IRQ_FREQ_CHANGE | PCXHR_IRQ_TIME_CODE)) {
 		/* clear events FREQ_CHANGE and TIME_CODE */
 		pcxhr_init_rmh(prmh, CMD_TEST_IT);
@@ -1055,7 +1055,7 @@ void pcxhr_msg_tasklet(unsigned long arg)
 			    err, prmh->stat[0]);
 	}
 	if (mgr->src_it_dsp & PCXHR_IRQ_ASYNC) {
-		snd_printdd("TASKLET : PCXHR_IRQ_ASYNC event occured\n");
+		snd_printdd("TASKLET : PCXHR_IRQ_ASYNC event occurred\n");
 
 		pcxhr_init_rmh(prmh, CMD_ASYNC);
 		prmh->cmd[0] |= 1;	/* add SEL_ASYNC_EVENTS */
@@ -1233,7 +1233,7 @@ irqreturn_t pcxhr_interrupt(int irq, void *dev_id)
 	reg = PCXHR_INPL(mgr, PCXHR_PLX_L2PCIDB);
 	PCXHR_OUTPL(mgr, PCXHR_PLX_L2PCIDB, reg);
 
-	/* timer irq occured */
+	/* timer irq occurred */
 	if (reg & PCXHR_IRQ_TIMER) {
 		int timer_toggle = reg & PCXHR_IRQ_TIMER;
 		/* is a 24 bit counter */
@@ -1288,7 +1288,7 @@ irqreturn_t pcxhr_interrupt(int irq, void *dev_id)
 	if (reg & PCXHR_IRQ_MASK) {
 		if (reg & PCXHR_IRQ_ASYNC) {
 			/* as we didn't request any async notifications,
-			 * some kind of xrun error will probably occured
+			 * some kind of xrun error will probably occurred
 			 */
 			/* better resynchronize all streams next interrupt : */
 			mgr->dsp_time_last = PCXHR_DSP_TIME_INVALID;
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index d5f5b440fc4..9ff247fc887 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -150,7 +150,7 @@ MODULE_PARM_DESC(enable, "Enable RME Digi96 soundcard.");
 #define RME96_RCR_BITPOS_F1 28
 #define RME96_RCR_BITPOS_F2 29
 
-/* Additonal register bits */
+/* Additional register bits */
 #define RME96_AR_WSEL       (1 << 0)
 #define RME96_AR_ANALOG     (1 << 1)
 #define RME96_AR_FREQPAD_0  (1 << 2)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index a323eafb9e0..949691a876d 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -391,7 +391,7 @@ MODULE_SUPPORTED_DEVICE("{{RME HDSPM-MADI}}");
 
 /* Status2 Register bits */ /* MADI ONLY */
 
-#define HDSPM_version0 (1<<0)	/* not realy defined but I guess */
+#define HDSPM_version0 (1<<0)	/* not really defined but I guess */
 #define HDSPM_version1 (1<<1)	/* in former cards it was ??? */
 #define HDSPM_version2 (1<<2)
 
@@ -936,7 +936,7 @@ struct hdspm {
 	struct snd_kcontrol *playback_mixer_ctls[HDSPM_MAX_CHANNELS];
 	/* but input to much, so not used */
 	struct snd_kcontrol *input_mixer_ctls[HDSPM_MAX_CHANNELS];
-	/* full mixer accessable over mixer ioctl or hwdep-device */
+	/* full mixer accessible over mixer ioctl or hwdep-device */
 	struct hdspm_mixer *mixer;
 
 	struct hdspm_tco *tco;  /* NULL if no TCO detected */
diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c
index 1b8f6742b5f..2b5c7a95ae1 100644
--- a/sound/pci/sis7019.c
+++ b/sound/pci/sis7019.c
@@ -308,7 +308,7 @@ static irqreturn_t sis_interrupt(int irq, void *dev)
 	u32 intr, status;
 
 	/* We only use the DMA interrupts, and we don't enable any other
-	 * source of interrupts. But, it is possible to see an interupt
+	 * source of interrupts. But, it is possible to see an interrupt
 	 * status that didn't actually interrupt us, so eliminate anything
 	 * we're not expecting to avoid falsely claiming an IRQ, and an
 	 * ensuing endless loop.
@@ -773,7 +773,7 @@ static void sis_prepare_timing_voice(struct voice *voice,
 		vperiod = 0;
 	}
 
-	/* The interrupt handler implements the timing syncronization, so
+	/* The interrupt handler implements the timing synchronization, so
 	 * setup its state.
 	 */
 	timing->flags |= VOICE_SYNC_TIMING;
@@ -1139,7 +1139,7 @@ static int sis_chip_init(struct sis7019 *sis)
 	 */
 	outl(SIS_DMA_CSR_PCI_SETTINGS, io + SIS_DMA_CSR);
 
-	/* Reset the syncronization groups for all of the channels
+	/* Reset the synchronization groups for all of the channels
 	 * to be asyncronous. If we start doing SPDIF or 5.1 sound, etc.
 	 * we'll need to change how we handle these. Until then, we just
 	 * assign sub-mixer 0 to all playback channels, and avoid any
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index edce8a27e3e..bc823a54755 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -358,7 +358,7 @@ static irqreturn_t snd_ps3_interrupt(int irq, void *dev_id)
 		 * filling dummy data, serial automatically start to
 		 * consume them and then will generate normal buffer
 		 * empty interrupts.
-		 * If both buffer underflow and buffer empty are occured,
+		 * If both buffer underflow and buffer empty are occurred,
 		 * it is better to do nomal data transfer than empty one
 		 */
 		snd_ps3_program_dma(card,
diff --git a/sound/ppc/snd_ps3_reg.h b/sound/ppc/snd_ps3_reg.h
index 03fdee4aaaf..2e630207956 100644
--- a/sound/ppc/snd_ps3_reg.h
+++ b/sound/ppc/snd_ps3_reg.h
@@ -125,7 +125,7 @@
    transfers.  Any interrupts associated with the canceled transfers
    will occur as if the transfer had finished.
    Since this bit is designed to recover from DMA related issues
-   which are caused by unpredictable situations, it is prefered to wait
+   which are caused by unpredictable situations, it is preferred to wait
    for normal DMA transfer end without using this bit.
 */
 #define PS3_AUDIO_CONFIG_CLEAR          (1 << 8)  /* RWIVF */
@@ -316,13 +316,13 @@ DISABLED=Interrupt generation disabled.
 
 /*
 Audio Port Interrupt Status Register
-Indicates Interrupt status, which interrupt has occured, and can clear
+Indicates Interrupt status, which interrupt has occurred, and can clear
 each interrupt in this register.
 Writing 1b to a field containing 1b clears field and de-asserts interrupt.
 Writing 0b to a field has no effect.
 Field vaules are the following:
-0 - Interrupt hasn't occured.
-1 - Interrupt has occured.
+0 - Interrupt hasn't occurred.
+1 - Interrupt has occurred.
 
 
  31            24 23           16 15            8 7             0
@@ -473,7 +473,7 @@ Channel N is out of action by setting 0 to asoen.
 /*
 Sampling Rate
 Specifies the divide ratio of the bit clock (clock output
-from bclko) used by the 3-wire Audio Output Clock, whcih
+from bclko) used by the 3-wire Audio Output Clock, which
 is applied to the master clock selected by mcksel.
 Data output is synchronized with this clock.
 */
@@ -756,7 +756,7 @@ The STATUS field can be used to monitor the progress of a DMA request.
 DONE indicates the previous request has completed.
 EVENT indicates that the DMA engine is waiting for the EVENT to occur.
 PENDING indicates that the DMA engine has not started processing this
-request, but the EVENT has occured.
+request, but the EVENT has occurred.
 DMA indicates that the data transfer is in progress.
 NOTIFY indicates that the notifier signalling end of transfer is being written.
 CLEAR indicated that the previous transfer was cleared.
@@ -824,7 +824,7 @@ AUDIOFIFO = Audio WriteData FIFO,
 
 /*
 PS3_AUDIO_DMASIZE specifies the number of 128-byte blocks + 1 to transfer.
-So a value of 0 means 128-bytes will get transfered.
+So a value of 0 means 128-bytes will get transferred.
 
 
  31            24 23           16 15            8 7             0
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 5d230cee3fa..7fbfa051f6e 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -672,7 +672,7 @@ static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai)
 	/* re-enable interrupts */
 	ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
 
-	/* Re-enable recieve and transmit as appropriate */
+	/* Re-enable receive and transmit as appropriate */
 	cr = 0;
 	cr |=
 	    (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
diff --git a/sound/soc/codecs/alc5623.c b/sound/soc/codecs/alc5623.c
index 4f377c9e868..eecffb54894 100644
--- a/sound/soc/codecs/alc5623.c
+++ b/sound/soc/codecs/alc5623.c
@@ -481,7 +481,7 @@ struct _pll_div {
 };
 
 /* Note : pll code from original alc5623 driver. Not sure of how good it is */
-/* usefull only for master mode */
+/* useful only for master mode */
 static const struct _pll_div codec_master_pll_div[] = {
 
 	{  2048000,  8192000,	0x0ea0},
diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c
index f7cd346fd72..f5ccdbf7ebc 100644
--- a/sound/soc/codecs/jz4740.c
+++ b/sound/soc/codecs/jz4740.c
@@ -308,8 +308,6 @@ static int jz4740_codec_dev_probe(struct snd_soc_codec *codec)
 	snd_soc_dapm_add_routes(dapm, jz4740_codec_dapm_routes,
 		ARRAY_SIZE(jz4740_codec_dapm_routes));
 
-	snd_soc_dapm_new_widgets(codec);
-
 	jz4740_codec_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
 	return 0;
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c
index 72de47e5d04..2c2a681da0d 100644
--- a/sound/soc/codecs/lm4857.c
+++ b/sound/soc/codecs/lm4857.c
@@ -161,7 +161,7 @@ static const struct snd_kcontrol_new lm4857_controls[] = {
 		lm4857_get_mode, lm4857_set_mode),
 };
 
-/* There is a demux inbetween the the input signal and the output signals.
+/* There is a demux between the input signal and the output signals.
  * Currently there is no easy way to model it in ASoC and since it does not make
  * much of a difference in practice simply connect the input direclty to the
  * outputs. */
diff --git a/sound/soc/codecs/sn95031.c b/sound/soc/codecs/sn95031.c
index 2a30eae1881..4d9fb279e14 100644
--- a/sound/soc/codecs/sn95031.c
+++ b/sound/soc/codecs/sn95031.c
@@ -26,7 +26,9 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 #include <linux/slab.h>
+
 #include <asm/intel_scu_ipc.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -925,7 +927,7 @@ static struct platform_driver sn95031_codec_driver = {
 		.owner		= THIS_MODULE,
 	},
 	.probe		= sn95031_device_probe,
-	.remove		= sn95031_device_remove,
+	.remove		= __devexit_p(sn95031_device_remove),
 };
 
 static int __init sn95031_init(void)
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 2727befd158..b04d28039c1 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -139,7 +139,7 @@ SOC_DOUBLE_R("Capture Volume", SSM2602_LINVOL, SSM2602_RINVOL, 0, 31, 0),
 SOC_DOUBLE_R("Capture Switch", SSM2602_LINVOL, SSM2602_RINVOL, 7, 1, 1),
 
 SOC_SINGLE("Mic Boost (+20dB)", SSM2602_APANA, 0, 1, 0),
-SOC_SINGLE("Mic Boost2 (+20dB)", SSM2602_APANA, 7, 1, 0),
+SOC_SINGLE("Mic Boost2 (+20dB)", SSM2602_APANA, 8, 1, 0),
 SOC_SINGLE("Mic Switch", SSM2602_APANA, 1, 1, 1),
 
 SOC_SINGLE("Sidetone Playback Volume", SSM2602_APANA, 6, 3, 1),
@@ -602,7 +602,7 @@ static struct snd_soc_codec_driver soc_codec_dev_ssm2602 = {
 	.read = ssm2602_read_reg_cache,
 	.write = ssm2602_write,
 	.set_bias_level = ssm2602_set_bias_level,
-	.reg_cache_size = sizeof(ssm2602_reg),
+	.reg_cache_size = ARRAY_SIZE(ssm2602_reg),
 	.reg_word_size = sizeof(u16),
 	.reg_cache_default = ssm2602_reg,
 };
@@ -614,7 +614,7 @@ static struct snd_soc_codec_driver soc_codec_dev_ssm2602 = {
  *    low  = 0x1a
  *    high = 0x1b
  */
-static int ssm2602_i2c_probe(struct i2c_client *i2c,
+static int __devinit ssm2602_i2c_probe(struct i2c_client *i2c,
 			     const struct i2c_device_id *id)
 {
 	struct ssm2602_priv *ssm2602;
@@ -635,7 +635,7 @@ static int ssm2602_i2c_probe(struct i2c_client *i2c,
 	return ret;
 }
 
-static int ssm2602_i2c_remove(struct i2c_client *client)
+static int __devexit ssm2602_i2c_remove(struct i2c_client *client)
 {
 	snd_soc_unregister_codec(&client->dev);
 	kfree(i2c_get_clientdata(client));
@@ -655,7 +655,7 @@ static struct i2c_driver ssm2602_i2c_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = ssm2602_i2c_probe,
-	.remove = ssm2602_i2c_remove,
+	.remove = __devexit_p(ssm2602_i2c_remove),
 	.id_table = ssm2602_i2c_id,
 };
 #endif
diff --git a/sound/soc/codecs/tlv320aic26.h b/sound/soc/codecs/tlv320aic26.h
index 62b1f226142..67f19c3bebe 100644
--- a/sound/soc/codecs/tlv320aic26.h
+++ b/sound/soc/codecs/tlv320aic26.h
@@ -14,14 +14,14 @@
 #define AIC26_PAGE_ADDR(page, offset)	((page << 6) | offset)
 #define AIC26_NUM_REGS			AIC26_PAGE_ADDR(3, 0)
 
-/* Page 0: Auxillary data registers */
+/* Page 0: Auxiliary data registers */
 #define AIC26_REG_BAT1			AIC26_PAGE_ADDR(0, 0x05)
 #define AIC26_REG_BAT2			AIC26_PAGE_ADDR(0, 0x06)
 #define AIC26_REG_AUX			AIC26_PAGE_ADDR(0, 0x07)
 #define AIC26_REG_TEMP1			AIC26_PAGE_ADDR(0, 0x09)
 #define AIC26_REG_TEMP2			AIC26_PAGE_ADDR(0, 0x0A)
 
-/* Page 1: Auxillary control registers */
+/* Page 1: Auxiliary control registers */
 #define AIC26_REG_AUX_ADC		AIC26_PAGE_ADDR(1, 0x00)
 #define AIC26_REG_STATUS		AIC26_PAGE_ADDR(1, 0x01)
 #define AIC26_REG_REFERENCE		AIC26_PAGE_ADDR(1, 0x03)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 3bedab26892..6c43c13f043 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -884,7 +884,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
 	if (bypass_pll)
 		return 0;
 
-	/* Use PLL, compute apropriate setup for j, d, r and p, the closest
+	/* Use PLL, compute appropriate setup for j, d, r and p, the closest
 	 * one wins the game. Try with d==0 first, next with d!=0.
 	 * Constraints for j are according to the datasheet.
 	 * The sysclk is divided by 1000 to prevent integer overflows.
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 00b6d87e7bd..082e9d51963 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -324,6 +324,10 @@ static void dac33_init_chip(struct snd_soc_codec *codec)
 	dac33_write(codec, DAC33_OUT_AMP_CTRL,
 		    dac33_read_reg_cache(codec, DAC33_OUT_AMP_CTRL));
 
+	dac33_write(codec, DAC33_LDAC_PWR_CTRL,
+		    dac33_read_reg_cache(codec, DAC33_LDAC_PWR_CTRL));
+	dac33_write(codec, DAC33_RDAC_PWR_CTRL,
+		    dac33_read_reg_cache(codec, DAC33_RDAC_PWR_CTRL));
 }
 
 static inline int dac33_read_id(struct snd_soc_codec *codec)
@@ -670,6 +674,7 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 {
 	struct snd_soc_codec *codec = dac33->codec;
 	unsigned int delay;
+	unsigned long flags;
 
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_MODE1:
@@ -677,10 +682,10 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 			DAC33_THRREG(dac33->nsample));
 
 		/* Take the timestamps */
-		spin_lock_irq(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		dac33->t_stamp2 = ktime_to_us(ktime_get());
 		dac33->t_stamp1 = dac33->t_stamp2;
-		spin_unlock_irq(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 
 		dac33_write16(codec, DAC33_PREFILL_MSB,
 				DAC33_THRREG(dac33->alarm_threshold));
@@ -692,11 +697,11 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 		break;
 	case DAC33_FIFO_MODE7:
 		/* Take the timestamp */
-		spin_lock_irq(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		dac33->t_stamp1 = ktime_to_us(ktime_get());
 		/* Move back the timestamp with drain time */
 		dac33->t_stamp1 -= dac33->mode7_us_to_lthr;
-		spin_unlock_irq(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 
 		dac33_write16(codec, DAC33_PREFILL_MSB,
 				DAC33_THRREG(DAC33_MODE7_MARGIN));
@@ -714,13 +719,14 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33)
 {
 	struct snd_soc_codec *codec = dac33->codec;
+	unsigned long flags;
 
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_MODE1:
 		/* Take the timestamp */
-		spin_lock_irq(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		dac33->t_stamp2 = ktime_to_us(ktime_get());
-		spin_unlock_irq(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 
 		dac33_write16(codec, DAC33_NSAMPLE_MSB,
 				DAC33_THRREG(dac33->nsample));
@@ -773,10 +779,11 @@ static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
 {
 	struct snd_soc_codec *codec = dev;
 	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+	unsigned long flags;
 
-	spin_lock(&dac33->lock);
+	spin_lock_irqsave(&dac33->lock, flags);
 	dac33->t_stamp1 = ktime_to_us(ktime_get());
-	spin_unlock(&dac33->lock);
+	spin_unlock_irqrestore(&dac33->lock, flags);
 
 	/* Do not schedule the workqueue in Mode7 */
 	if (dac33->fifo_mode != DAC33_FIFO_MODE7)
@@ -1020,7 +1027,7 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream)
 		/*
 		 * For FIFO bypass mode:
 		 * Enable the FIFO bypass (Disable the FIFO use)
-		 * Set the BCLK as continous
+		 * Set the BCLK as continuous
 		 */
 		fifoctrl_a |= DAC33_FBYPAS;
 		aictrl_b |= DAC33_BCLKON;
@@ -1173,15 +1180,16 @@ static snd_pcm_sframes_t dac33_dai_delay(
 	unsigned int time_delta, uthr;
 	int samples_out, samples_in, samples;
 	snd_pcm_sframes_t delay = 0;
+	unsigned long flags;
 
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_BYPASS:
 		break;
 	case DAC33_FIFO_MODE1:
-		spin_lock(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		t0 = dac33->t_stamp1;
 		t1 = dac33->t_stamp2;
-		spin_unlock(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 		t_now = ktime_to_us(ktime_get());
 
 		/* We have not started to fill the FIFO yet, delay is 0 */
@@ -1246,10 +1254,10 @@ static snd_pcm_sframes_t dac33_dai_delay(
 		}
 		break;
 	case DAC33_FIFO_MODE7:
-		spin_lock(&dac33->lock);
+		spin_lock_irqsave(&dac33->lock, flags);
 		t0 = dac33->t_stamp1;
 		uthr = dac33->uthr;
-		spin_unlock(&dac33->lock);
+		spin_unlock_irqrestore(&dac33->lock, flags);
 		t_now = ktime_to_us(ktime_get());
 
 		/* We have not started to fill the FIFO yet, delay is 0 */
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 8512800f632..575238d68e5 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -281,7 +281,7 @@ static inline void twl4030_check_defaults(struct snd_soc_codec *codec)
 				 i, val, twl4030_reg[i]);
 		}
 	}
-	dev_dbg(codec->dev, "Found %d non maching registers. %s\n",
+	dev_dbg(codec->dev, "Found %d non-matching registers. %s\n",
 		 difference, difference ? "Not OK" : "OK");
 }
 
@@ -2018,7 +2018,7 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
 	u8 mode;
 
 	/* If the system master clock is not 26MHz, the voice PCM interface is
-	 * not avilable.
+	 * not available.
 	 */
 	if (twl4030->sysclk != 26000) {
 		dev_err(codec->dev, "The board is configured for %u Hz, while"
@@ -2028,7 +2028,7 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
 	}
 
 	/* If the codec mode is not option2, the voice PCM interface is not
-	 * avilable.
+	 * available.
 	 */
 	mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE)
 		& TWL4030_OPT_MODE;
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 482fcdb59bf..255901c4460 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -1629,8 +1629,10 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	priv->naudint = naudint;
 	priv->workqueue = create_singlethread_workqueue("twl6040-codec");
 
-	if (!priv->workqueue)
+	if (!priv->workqueue) {
+		ret = -ENOMEM;
 		goto work_err;
+	}
 
 	INIT_DELAYED_WORK(&priv->delayed_work, twl6040_accessory_work);
 
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index 48ffd406a71..a7b8f301bad 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -601,9 +601,7 @@ static struct snd_soc_codec_driver soc_codec_dev_uda134x = {
 	.reg_cache_step = 1,
 	.read = uda134x_read_reg_cache,
 	.write = uda134x_write,
-#ifdef POWER_OFF_ON_STANDBY
 	.set_bias_level = uda134x_set_bias_level,
-#endif
 };
 
 static int __devinit uda134x_codec_probe(struct platform_device *pdev)
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 8f6b5ee6645..4bbc0a79f01 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -772,7 +772,7 @@ static int wm8580_set_bias_level(struct snd_soc_codec *codec,
 			reg &= ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD);
 			snd_soc_write(codec, WM8580_PWRDN1, reg);
 
-			/* Make VMID high impedence */
+			/* Make VMID high impedance */
 			reg = snd_soc_read(codec,  WM8580_ADC_CONTROL1);
 			reg &= ~0x100;
 			snd_soc_write(codec, WM8580_ADC_CONTROL1, reg);
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 3f09deea8d9..ffa2ffe5ec1 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1312,7 +1312,7 @@ static int wm8753_set_bias_level(struct snd_soc_codec *codec,
 	SNDRV_PCM_FMTBIT_S24_LE)
 
 /*
- * The WM8753 supports upto 4 different and mutually exclusive DAI
+ * The WM8753 supports up to 4 different and mutually exclusive DAI
  * configurations. This gives 2 PCM's available for use, hifi and voice.
  * NOTE: The Voice PCM cannot play or capture audio to the CPU as it's DAI
  * is connected between the wm8753 and a BT codec or GSM modem.
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index ae1cadfae84..824d1c8c8a3 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -247,8 +247,6 @@ static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int re
 	case WM8903_REVISION_NUMBER:
 	case WM8903_INTERRUPT_STATUS_1:
 	case WM8903_WRITE_SEQUENCER_4:
-	case WM8903_POWER_MANAGEMENT_3:
-	case WM8903_POWER_MANAGEMENT_2:
 	case WM8903_DC_SERVO_READBACK_1:
 	case WM8903_DC_SERVO_READBACK_2:
 	case WM8903_DC_SERVO_READBACK_3:
@@ -694,7 +692,7 @@ SOC_ENUM("DRC Smoothing Threshold", drc_smoothing),
 SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
 
 SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
-		 WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
+		 WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
 SOC_ENUM("ADC Companding Mode", adc_companding),
 SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
 
@@ -875,34 +873,40 @@ SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
 SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
 		   right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
 
-SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_ANALOGUE_HP_0,
-		   4, 0, NULL, 0),
-SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_ANALOGUE_HP_0,
+SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
+		   1, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
 		   0, 0, NULL, 0),
 
-SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_ANALOGUE_LINEOUT_0, 4, 0,
+SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 1, 0,
 		   NULL, 0),
-SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_ANALOGUE_LINEOUT_0, 0, 0,
+SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 0, 0,
 		   NULL, 0),
 
 SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0),
 SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0),
-SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 1, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPL_ENA", 1, WM8903_ANALOGUE_HP_0, 4, 0, NULL, 0),
 SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0),
 SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0),
-SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 1, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPR_ENA", 1, WM8903_ANALOGUE_HP_0, 0, 0, NULL, 0),
 
 SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0,
 		   NULL, 0),
 SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0,
 		   NULL, 0),
-SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 5, 0,
+SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 5, 0,
+		   NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTL_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 4, 0,
 		   NULL, 0),
 SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0,
 		   NULL, 0),
 SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0,
 		   NULL, 0),
-SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 1, 0,
+SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 1, 0,
+		   NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTR_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 0, 0,
 		   NULL, 0),
 
 SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0),
@@ -1037,10 +1041,14 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{ "Left Speaker PGA", NULL, "Left Speaker Mixer" },
 	{ "Right Speaker PGA", NULL, "Right Speaker Mixer" },
 
-	{ "HPL_ENA_DLY", NULL, "Left Headphone Output PGA" },
-	{ "HPR_ENA_DLY", NULL, "Right Headphone Output PGA" },
-	{ "LINEOUTL_ENA_DLY", NULL, "Left Line Output PGA" },
-	{ "LINEOUTR_ENA_DLY", NULL, "Right Line Output PGA" },
+	{ "HPL_ENA", NULL, "Left Headphone Output PGA" },
+	{ "HPR_ENA", NULL, "Right Headphone Output PGA" },
+	{ "HPL_ENA_DLY", NULL, "HPL_ENA" },
+	{ "HPR_ENA_DLY", NULL, "HPR_ENA" },
+	{ "LINEOUTL_ENA", NULL, "Left Line Output PGA" },
+	{ "LINEOUTR_ENA", NULL, "Right Line Output PGA" },
+	{ "LINEOUTL_ENA_DLY", NULL, "LINEOUTL_ENA" },
+	{ "LINEOUTR_ENA_DLY", NULL, "LINEOUTR_ENA" },
 
 	{ "HPL_DCS", NULL, "DCS Master" },
 	{ "HPR_DCS", NULL, "DCS Master" },
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 443ae580445..9b3bba4df5b 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -1895,7 +1895,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 
 	pr_debug("Fvco=%dHz\n", target);
 
-	/* Find an appropraite FLL_FRATIO and factor it out of the target */
+	/* Find an appropriate FLL_FRATIO and factor it out of the target */
 	for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 		if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 			fll_div->fll_fratio = fll_fratios[i].fll_fratio;
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index 5e0214d6293..3c7198779c3 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -176,7 +176,7 @@ static int wm8995_pll_factors(struct device *dev,
 	return 0;
 }
 
-/* Lookup table specifiying SRATE (table 25 in datasheet); some of the
+/* Lookup table specifying SRATE (table 25 in datasheet); some of the
  * output frequencies have been rounded to the standard frequencies
  * they are intended to match where the error is slight. */
 static struct {
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 3b71dd65c96..500011eb8b2 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3137,7 +3137,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 
 	pr_debug("FLL Fvco=%dHz\n", target);
 
-	/* Find an appropraite FLL_FRATIO and factor it out of the target */
+	/* Find an appropriate FLL_FRATIO and factor it out of the target */
 	for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 		if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 			fll_div->fll_fratio = fll_fratios[i].fll_fratio;
diff --git a/sound/soc/codecs/wm8991.c b/sound/soc/codecs/wm8991.c
index 28fdfd66661..3c2ee1bb73c 100644
--- a/sound/soc/codecs/wm8991.c
+++ b/sound/soc/codecs/wm8991.c
@@ -981,7 +981,7 @@ static int wm8991_set_dai_pll(struct snd_soc_dai *codec_dai,
 		reg = snd_soc_read(codec, WM8991_CLOCKING_2);
 		snd_soc_write(codec, WM8991_CLOCKING_2, reg | WM8991_SYSCLK_SRC);
 
-		/* set up N , fractional mode and pre-divisor if neccessary */
+		/* set up N , fractional mode and pre-divisor if necessary */
 		snd_soc_write(codec, WM8991_PLL1, pll_div.n | WM8991_SDM |
 			      (pll_div.div2 ? WM8991_PRESCALE : 0));
 		snd_soc_write(codec, WM8991_PLL2, (u8)(pll_div.k>>8));
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index 379fa22c5b6..056aef90434 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -324,7 +324,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 
 	pr_debug("Fvco=%dHz\n", target);
 
-	/* Find an appropraite FLL_FRATIO and factor it out of the target */
+	/* Find an appropriate FLL_FRATIO and factor it out of the target */
 	for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 		if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 			fll_div->fll_fratio = fll_fratios[i].fll_fratio;
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 3dc64c8b6a5..84e1bd1d282 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -82,18 +82,18 @@ struct wm8994_priv {
 
 	int mbc_ena[3];
 
-	/* Platform dependant DRC configuration */
+	/* Platform dependent DRC configuration */
 	const char **drc_texts;
 	int drc_cfg[WM8994_NUM_DRC];
 	struct soc_enum drc_enum;
 
-	/* Platform dependant ReTune mobile configuration */
+	/* Platform dependent ReTune mobile configuration */
 	int num_retune_mobile_texts;
 	const char **retune_mobile_texts;
 	int retune_mobile_cfg[WM8994_NUM_EQ];
 	struct soc_enum retune_mobile_enum;
 
-	/* Platform dependant MBC configuration */
+	/* Platform dependent MBC configuration */
 	int mbc_cfg;
 	const char **mbc_texts;
 	struct soc_enum mbc_enum;
@@ -3261,20 +3261,36 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 	wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
 	/* Latch volume updates (right only; we always do left then right). */
+	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_LEFT_VOLUME,
+			    WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
 	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME,
 			    WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
+	snd_soc_update_bits(codec, WM8994_AIF1_DAC2_LEFT_VOLUME,
+			    WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
 	snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME,
 			    WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
+	snd_soc_update_bits(codec, WM8994_AIF2_DAC_LEFT_VOLUME,
+			    WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
 	snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME,
 			    WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
+	snd_soc_update_bits(codec, WM8994_AIF1_ADC1_LEFT_VOLUME,
+			    WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
 	snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME,
 			    WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
+	snd_soc_update_bits(codec, WM8994_AIF1_ADC2_LEFT_VOLUME,
+			    WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
 	snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME,
 			    WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
+	snd_soc_update_bits(codec, WM8994_AIF2_ADC_LEFT_VOLUME,
+			    WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
 	snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME,
 			    WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
+	snd_soc_update_bits(codec, WM8994_DAC1_LEFT_VOLUME,
+			    WM8994_DAC1_VU, WM8994_DAC1_VU);
 	snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME,
 			    WM8994_DAC1_VU, WM8994_DAC1_VU);
+	snd_soc_update_bits(codec, WM8994_DAC2_LEFT_VOLUME,
+			    WM8994_DAC2_VU, WM8994_DAC2_VU);
 	snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME,
 			    WM8994_DAC2_VU, WM8994_DAC2_VU);
 
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 55cdf298202..91c6b39de50 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -305,7 +305,7 @@ static int speaker_mode_get(struct snd_kcontrol *kcontrol,
 /*
  * Stop any attempts to change speaker mode while the speaker is enabled.
  *
- * We also have some special anti-pop controls dependant on speaker
+ * We also have some special anti-pop controls dependent on speaker
  * mode which must be changed along with the mode.
  */
 static int speaker_mode_put(struct snd_kcontrol *kcontrol,
@@ -456,7 +456,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 
 	pr_debug("Fvco=%dHz\n", target);
 
-	/* Find an appropraite FLL_FRATIO and factor it out of the target */
+	/* Find an appropriate FLL_FRATIO and factor it out of the target */
 	for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 		if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 			fll_div->fll_fratio = fll_fratios[i].fll_fratio;
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 7b6b3c18e29..4005e9af5d6 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -740,12 +740,12 @@ static const struct snd_soc_dapm_route analogue_routes[] = {
 
 	{ "SPKL", "Input Switch", "MIXINL" },
 	{ "SPKL", "IN1LP Switch", "IN1LP" },
-	{ "SPKL", "Output Switch", "Left Output Mixer" },
+	{ "SPKL", "Output Switch", "Left Output PGA" },
 	{ "SPKL", NULL, "TOCLK" },
 
 	{ "SPKR", "Input Switch", "MIXINR" },
 	{ "SPKR", "IN1RP Switch", "IN1RP" },
-	{ "SPKR", "Output Switch", "Right Output Mixer" },
+	{ "SPKR", "Output Switch", "Right Output PGA" },
 	{ "SPKR", NULL, "TOCLK" },
 
 	{ "SPKL Boost", "Direct Voice Switch", "Direct Voice" },
@@ -767,8 +767,8 @@ static const struct snd_soc_dapm_route analogue_routes[] = {
 	{ "SPKOUTRP", NULL, "SPKR Driver" },
 	{ "SPKOUTRN", NULL, "SPKR Driver" },
 
-	{ "Left Headphone Mux", "Mixer", "Left Output Mixer" },
-	{ "Right Headphone Mux", "Mixer", "Right Output Mixer" },
+	{ "Left Headphone Mux", "Mixer", "Left Output PGA" },
+	{ "Right Headphone Mux", "Mixer", "Right Output PGA" },
 
 	{ "Headphone PGA", NULL, "Left Headphone Mux" },
 	{ "Headphone PGA", NULL, "Right Headphone Mux" },
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index a5af834c8ef..4ddc6d3b667 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -434,17 +434,21 @@ static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
 		mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
 
-		mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x7 << 26));
+		mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG,
+				ACLKX | AHCLKX | AFSX);
 		break;
 	case SND_SOC_DAIFMT_CBM_CFS:
 		/* codec is clock master and frame slave */
-		mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+		mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
 		mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
 
-		mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+		mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
 		mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
 
-		mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x2d << 26));
+		mcasp_clr_bits(base + DAVINCI_MCASP_PDIR_REG,
+				ACLKX | ACLKR);
+		mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG,
+				AFSX | AFSR);
 		break;
 	case SND_SOC_DAIFMT_CBM_CFM:
 		/* codec is clock and frame master */
@@ -454,7 +458,8 @@ static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 		mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
 		mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
 
-		mcasp_clr_bits(base + DAVINCI_MCASP_PDIR_REG, (0x3f << 26));
+		mcasp_clr_bits(base + DAVINCI_MCASP_PDIR_REG,
+				ACLKX | AHCLKX | AFSX | ACLKR | AHCLKR | AFSR);
 		break;
 
 	default:
@@ -644,7 +649,7 @@ static void davinci_hw_param(struct davinci_audio_dev *dev, int stream)
 		mcasp_set_reg(dev->base + DAVINCI_MCASP_TXTDM_REG, mask);
 		mcasp_set_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXORD);
 
-		if ((dev->tdm_slots >= 2) || (dev->tdm_slots <= 32))
+		if ((dev->tdm_slots >= 2) && (dev->tdm_slots <= 32))
 			mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMCTL_REG,
 					FSXMOD(dev->tdm_slots), FSXMOD(0x1FF));
 		else
@@ -660,7 +665,7 @@ static void davinci_hw_param(struct davinci_audio_dev *dev, int stream)
 				AHCLKRE);
 		mcasp_set_reg(dev->base + DAVINCI_MCASP_RXTDM_REG, mask);
 
-		if ((dev->tdm_slots >= 2) || (dev->tdm_slots <= 32))
+		if ((dev->tdm_slots >= 2) && (dev->tdm_slots <= 32))
 			mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMCTL_REG,
 					FSRMOD(dev->tdm_slots), FSRMOD(0x1FF));
 		else
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 671ef8dd524..aab7765f401 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
 		slave_config.direction = DMA_TO_DEVICE;
 		slave_config.dst_addr = dma_params->dma_addr;
 		slave_config.dst_addr_width = buswidth;
-		slave_config.dst_maxburst = dma_params->burstsize;
+		slave_config.dst_maxburst = dma_params->burstsize * buswidth;
 	} else {
 		slave_config.direction = DMA_FROM_DEVICE;
 		slave_config.src_addr = dma_params->dma_addr;
 		slave_config.src_addr_width = buswidth;
-		slave_config.src_maxburst = dma_params->burstsize;
+		slave_config.src_maxburst = dma_params->burstsize * buswidth;
 	}
 
 	ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
@@ -303,6 +303,11 @@ static struct snd_soc_platform_driver imx_soc_platform_mx2 = {
 
 static int __devinit imx_soc_platform_probe(struct platform_device *pdev)
 {
+	struct imx_ssi *ssi = platform_get_drvdata(pdev);
+
+	ssi->dma_params_tx.burstsize = 6;
+	ssi->dma_params_rx.burstsize = 4;
+
 	return snd_soc_register_platform(&pdev->dev, &imx_soc_platform_mx2);
 }
 
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index bc92ec62000..ac2ded96925 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -16,7 +16,7 @@
  * sane processor vendors have a FIFO per AC97 slot, the i.MX has only
  * one FIFO which combines all valid receive slots. We cannot even select
  * which slots we want to receive. The WM9712 with which this driver
- * was developped with always sends GPIO status data in slot 12 which
+ * was developed with always sends GPIO status data in slot 12 which
  * we receive in our (PCM-) data stream. The only chance we have is to
  * manually skip this data in the FIQ handler. With sampling rates different
  * from 48000Hz not every frame has valid receive data, so the ratio
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
index a4406a13489..dc8a87530e3 100644
--- a/sound/soc/imx/imx-ssi.h
+++ b/sound/soc/imx/imx-ssi.h
@@ -234,7 +234,4 @@ void imx_pcm_free(struct snd_pcm *pcm);
  */
 #define IMX_SSI_DMABUF_SIZE	(64 * 1024)
 
-#define DMA_RXFIFO_BURST      0x4
-#define DMA_TXFIFO_BURST      0x6
-
 #endif /* _IMX_SSI_H */
diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
index 419bf4f5534..cd22a54b2f1 100644
--- a/sound/soc/jz4740/jz4740-i2s.c
+++ b/sound/soc/jz4740/jz4740-i2s.c
@@ -133,7 +133,7 @@ static void jz4740_i2s_shutdown(struct snd_pcm_substream *substream,
 	struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai);
 	uint32_t conf;
 
-	if (!dai->active)
+	if (dai->active)
 		return;
 
 	conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
index 0fd6a630db0..e13c6ce4632 100644
--- a/sound/soc/kirkwood/kirkwood-dma.c
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -132,7 +132,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream)
 	priv = snd_soc_dai_get_dma_data(cpu_dai, substream);
 	snd_soc_set_runtime_hwparams(substream, &kirkwood_dma_snd_hw);
 
-	/* Ensure that all constraints linked to dma burst are fullfilled */
+	/* Ensure that all constraints linked to dma burst are fulfilled */
 	err = snd_pcm_hw_constraint_minmax(runtime,
 			SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
 			priv->burst * 2,
@@ -170,7 +170,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream)
 
 		/*
 		 * Enable Error interrupts. We're only ack'ing them but
-		 * it's usefull for diagnostics
+		 * it's useful for diagnostics
 		 */
 		writel((unsigned long)-1, priv->io + KIRKWOOD_ERR_MASK);
 	}
diff --git a/sound/soc/mid-x86/sst_platform.c b/sound/soc/mid-x86/sst_platform.c
index ee2c22475a7..6b1f9d3bf34 100644
--- a/sound/soc/mid-x86/sst_platform.c
+++ b/sound/soc/mid-x86/sst_platform.c
@@ -116,18 +116,20 @@ struct snd_soc_dai_driver sst_platform_dai[] = {
 static inline void sst_set_stream_status(struct sst_runtime_stream *stream,
 					int state)
 {
-	spin_lock(&stream->status_lock);
+	unsigned long flags;
+	spin_lock_irqsave(&stream->status_lock, flags);
 	stream->stream_status = state;
-	spin_unlock(&stream->status_lock);
+	spin_unlock_irqrestore(&stream->status_lock, flags);
 }
 
 static inline int sst_get_stream_status(struct sst_runtime_stream *stream)
 {
 	int state;
+	unsigned long flags;
 
-	spin_lock(&stream->status_lock);
+	spin_lock_irqsave(&stream->status_lock, flags);
 	state = stream->stream_status;
-	spin_unlock(&stream->status_lock);
+	spin_unlock_irqrestore(&stream->status_lock, flags);
 	return state;
 }
 
@@ -374,6 +376,11 @@ static int sst_platform_pcm_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+static int sst_platform_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_pages(substream);
+}
+
 static struct snd_pcm_ops sst_platform_ops = {
 	.open = sst_platform_open,
 	.close = sst_platform_close,
@@ -382,6 +389,7 @@ static struct snd_pcm_ops sst_platform_ops = {
 	.trigger = sst_platform_pcm_trigger,
 	.pointer = sst_platform_pcm_pointer,
 	.hw_params = sst_platform_pcm_hw_params,
+	.hw_free = sst_platform_pcm_hw_free,
 };
 
 static void sst_pcm_free(struct snd_pcm *pcm)
@@ -440,7 +448,7 @@ static int sst_platform_remove(struct platform_device *pdev)
 
 	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sst_platform_dai));
 	snd_soc_unregister_platform(&pdev->dev);
-	pr_debug("sst_platform_remove sucess\n");
+	pr_debug("sst_platform_remove success\n");
 	return 0;
 }
 
@@ -463,7 +471,7 @@ module_init(sst_soc_platform_init);
 static void __exit sst_soc_platform_exit(void)
 {
 	platform_driver_unregister(&sst_platform_driver);
-	pr_debug("sst_soc_platform_exit sucess\n");
+	pr_debug("sst_soc_platform_exit success\n");
 }
 module_exit(sst_soc_platform_exit);
 
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index 3167be68962..462cbcbea74 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -248,7 +248,7 @@ static struct snd_soc_jack_pin ams_delta_hook_switch_pins[] = {
  */
 
 /* To actually apply any modem controlled configuration changes to the codec,
- * we must connect codec DAI pins to the modem for a moment.  Be carefull not
+ * we must connect codec DAI pins to the modem for a moment.  Be careful not
  * to interfere with our digital mute function that shares the same hardware. */
 static struct timer_list cx81801_timer;
 static bool cx81801_cmd_pending;
@@ -402,9 +402,9 @@ static struct tty_ldisc_ops cx81801_ops = {
 
 
 /*
- * Even if not very usefull, the sound card can still work without any of the
+ * Even if not very useful, the sound card can still work without any of the
  * above functonality activated.  You can still control its audio input/output
- * constellation and speakerphone gain from userspace by issueing AT commands
+ * constellation and speakerphone gain from userspace by issuing AT commands
  * over the modem port.
  */
 
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 784cff5f67e..9027da466ca 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -310,7 +310,7 @@ static struct snd_soc_dai_link corgi_dai = {
 	.cpu_dai_name = "pxa2xx-i2s",
 	.codec_dai_name = "wm8731-hifi",
 	.platform_name = "pxa-pcm-audio",
-	.codec_name = "wm8731-codec-0.001b",
+	.codec_name = "wm8731-codec.0-001b",
 	.init = corgi_wm8731_init,
 	.ops = &corgi_ops,
 };
diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c
index 02fb66416dd..2ce0b2d891d 100644
--- a/sound/soc/pxa/pxa2xx-pcm.c
+++ b/sound/soc/pxa/pxa2xx-pcm.c
@@ -65,6 +65,7 @@ static int pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream)
 	if (prtd->dma_ch >= 0) {
 		pxa_free_dma(prtd->dma_ch);
 		prtd->dma_ch = -1;
+		prtd->params = NULL;
 	}
 
 	return 0;
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
index ac577263b3e..b6445757fc5 100644
--- a/sound/soc/pxa/zylonite.c
+++ b/sound/soc/pxa/zylonite.c
@@ -167,7 +167,7 @@ static struct snd_soc_dai_link zylonite_dai[] = {
 	.codec_name = "wm9713-codec",
 	.platform_name = "pxa-pcm-audio",
 	.cpu_dai_name = "pxa2xx-ac97",
-	.codec_name = "wm9713-hifi",
+	.codec_dai_name = "wm9713-hifi",
 	.init = zylonite_wm9713_init,
 },
 {
@@ -176,7 +176,7 @@ static struct snd_soc_dai_link zylonite_dai[] = {
 	.codec_name = "wm9713-codec",
 	.platform_name = "pxa-pcm-audio",
 	.cpu_dai_name = "pxa2xx-ac97-aux",
-	.codec_name = "wm9713-aux",
+	.codec_dai_name = "wm9713-aux",
 },
 {
 	.name = "WM9713 Voice",
@@ -184,7 +184,7 @@ static struct snd_soc_dai_link zylonite_dai[] = {
 	.codec_name = "wm9713-codec",
 	.platform_name = "pxa-pcm-audio",
 	.cpu_dai_name = "pxa-ssp-dai.2",
-	.codec_name = "wm9713-voice",
+	.codec_dai_name = "wm9713-voice",
 	.ops = &zylonite_voice_ops,
 },
 };
diff --git a/sound/soc/samsung/goni_wm8994.c b/sound/soc/samsung/goni_wm8994.c
index f6b3a3ce591..0e80daee8b6 100644
--- a/sound/soc/samsung/goni_wm8994.c
+++ b/sound/soc/samsung/goni_wm8994.c
@@ -236,18 +236,18 @@ static struct snd_soc_dai_link goni_dai[] = {
 	.name = "WM8994",
 	.stream_name = "WM8994 HiFi",
 	.cpu_dai_name = "samsung-i2s.0",
-	.codec_dai_name = "wm8994-hifi",
+	.codec_dai_name = "wm8994-aif1",
 	.platform_name = "samsung-audio",
-	.codec_name = "wm8994-codec.0-0x1a",
+	.codec_name = "wm8994-codec.0-001a",
 	.init = goni_wm8994_init,
 	.ops = &goni_hifi_ops,
 }, {
 	.name = "WM8994 Voice",
 	.stream_name = "Voice",
 	.cpu_dai_name = "goni-voice-dai",
-	.codec_dai_name = "wm8994-voice",
+	.codec_dai_name = "wm8994-aif2",
 	.platform_name = "samsung-audio",
-	.codec_name = "wm8994-codec.0-0x1a",
+	.codec_name = "wm8994-codec.0-001a",
 	.ops = &goni_voice_ops,
 },
 };
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index 78bfdb3f5d7..45223097563 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -228,7 +228,7 @@ static const struct snd_kcontrol_new neo1973_wm8753_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Handset Mic"),
 };
 
-/* GTA02 specific routes and controlls */
+/* GTA02 specific routes and controls */
 
 #ifdef CONFIG_MACH_NEO1973_GTA02
 
@@ -372,7 +372,7 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
 	return 0;
 }
 
-/* GTA01 specific controlls */
+/* GTA01 specific controls */
 
 #ifdef CONFIG_MACH_NEO1973_GTA01
 
diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
index 38aac7d57a5..9c7e8b48aed 100644
--- a/sound/soc/samsung/pcm.c
+++ b/sound/soc/samsung/pcm.c
@@ -350,8 +350,8 @@ static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai,
 	ctl = readl(regs + S3C_PCM_CTL);
 
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-	case SND_SOC_DAIFMT_NB_NF:
-		/* Nothing to do, NB_NF by default */
+	case SND_SOC_DAIFMT_IB_NF:
+		/* Nothing to do, IB_NF by default */
 		break;
 	default:
 		dev_err(pcm->dev, "Unsupported clock inversion!\n");
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 0c9997e2d8c..23c0e83d4c1 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -1200,10 +1200,11 @@ static int fsi_probe(struct platform_device *pdev)
 	master->fsib.master	= master;
 
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_resume(&pdev->dev);
 	dev_set_drvdata(&pdev->dev, master);
 
+	pm_runtime_get_sync(&pdev->dev);
 	fsi_soft_all_reset(master);
+	pm_runtime_put_sync(&pdev->dev);
 
 	ret = request_irq(irq, &fsi_interrupt, IRQF_DISABLED,
 			  id_entry->name, master);
@@ -1218,8 +1219,17 @@ static int fsi_probe(struct platform_device *pdev)
 		goto exit_free_irq;
 	}
 
-	return snd_soc_register_dais(&pdev->dev, fsi_soc_dai, ARRAY_SIZE(fsi_soc_dai));
+	ret = snd_soc_register_dais(&pdev->dev, fsi_soc_dai,
+				    ARRAY_SIZE(fsi_soc_dai));
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot snd dai register\n");
+		goto exit_snd_soc;
+	}
+
+	return ret;
 
+exit_snd_soc:
+	snd_soc_unregister_platform(&pdev->dev);
 exit_free_irq:
 	free_irq(irq, master);
 exit_iounmap:
@@ -1238,12 +1248,11 @@ static int fsi_remove(struct platform_device *pdev)
 
 	master = dev_get_drvdata(&pdev->dev);
 
-	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(fsi_soc_dai));
-	snd_soc_unregister_platform(&pdev->dev);
-
+	free_irq(master->irq, master);
 	pm_runtime_disable(&pdev->dev);
 
-	free_irq(master->irq, master);
+	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(fsi_soc_dai));
+	snd_soc_unregister_platform(&pdev->dev);
 
 	iounmap(master->base);
 	kfree(master);
@@ -1321,3 +1330,4 @@ module_exit(fsi_mobile_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SuperH onchip FSI audio driver");
 MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
+MODULE_ALIAS("platform:fsi-pcm-audio");
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 4dda58926bc..dd55d106946 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -92,8 +92,8 @@ static int min_bytes_needed(unsigned long val)
 static int format_register_str(struct snd_soc_codec *codec,
 			       unsigned int reg, char *buf, size_t len)
 {
-	int wordsize = codec->driver->reg_word_size * 2;
-	int regsize = min_bytes_needed(codec->driver->reg_cache_size) * 2;
+	int wordsize = min_bytes_needed(codec->driver->reg_cache_size) * 2;
+	int regsize = codec->driver->reg_word_size * 2;
 	int ret;
 	char tmpbuf[len + 1];
 	char regbuf[regsize + 1];
@@ -132,8 +132,8 @@ static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf,
 	size_t total = 0;
 	loff_t p = 0;
 
-	wordsize = codec->driver->reg_word_size * 2;
-	regsize = min_bytes_needed(codec->driver->reg_cache_size) * 2;
+	wordsize = min_bytes_needed(codec->driver->reg_cache_size) * 2;
+	regsize = codec->driver->reg_word_size * 2;
 
 	len = wordsize + regsize + 2 + 1;
 
@@ -629,6 +629,7 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 			runtime->hw.rates |= codec_dai_drv->capture.rates;
 	}
 
+	ret = -EINVAL;
 	snd_pcm_limit_hw_rates(runtime);
 	if (!runtime->hw.rates) {
 		printk(KERN_ERR "asoc: %s <-> %s No matching rates\n",
@@ -640,7 +641,8 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
 			codec_dai->name, cpu_dai->name);
 		goto config_err;
 	}
-	if (!runtime->hw.channels_min || !runtime->hw.channels_max) {
+	if (!runtime->hw.channels_min || !runtime->hw.channels_max ||
+	    runtime->hw.channels_min > runtime->hw.channels_max) {
 		printk(KERN_ERR "asoc: %s <-> %s No matching channels\n",
 				codec_dai->name, cpu_dai->name);
 		goto config_err;
@@ -2060,6 +2062,7 @@ const struct dev_pm_ops snd_soc_pm_ops = {
 	.resume = snd_soc_resume,
 	.poweroff = snd_soc_poweroff,
 };
+EXPORT_SYMBOL_GPL(snd_soc_pm_ops);
 
 /* ASoC platform driver */
 static struct platform_driver soc_driver = {
@@ -3288,6 +3291,8 @@ int snd_soc_register_card(struct snd_soc_card *card)
 	if (!card->name || !card->dev)
 		return -EINVAL;
 
+	dev_set_drvdata(card->dev, card);
+
 	snd_soc_initialize_card_lists(card);
 
 	soc_init_card_debugfs(card);
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index fcab80b36a3..fc017c0a7b5 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -331,7 +331,7 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
 			goto err;
 
 		if (gpios[i].wake) {
-			ret = set_irq_wake(gpio_to_irq(gpios[i].gpio), 1);
+			ret = irq_set_irq_wake(gpio_to_irq(gpios[i].gpio), 1);
 			if (ret != 0)
 				printk(KERN_ERR
 				  "Failed to mark GPIO %d as wake source: %d\n",
diff --git a/sound/soc/tegra/harmony.c b/sound/soc/tegra/harmony.c
index 8585957477e..556a5713392 100644
--- a/sound/soc/tegra/harmony.c
+++ b/sound/soc/tegra/harmony.c
@@ -370,6 +370,7 @@ static struct platform_driver tegra_snd_harmony_driver = {
 	.driver = {
 		.name = DRV_NAME,
 		.owner = THIS_MODULE,
+		.pm = &snd_soc_pm_ops,
 	},
 	.probe = tegra_snd_harmony_probe,
 	.remove = __devexit_p(tegra_snd_harmony_remove),
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 9081a54a9c6..86c1a310376 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -76,7 +76,7 @@ struct ihex_record {
 	u16 address;
 	u8 len;
 	u8 data[256];
-	char error; /* true if an error occured parsing this record */
+	char error; /* true if an error occurred parsing this record */
 
 	u8 max_len; /* maximum record length in whole ihex */
 
@@ -107,7 +107,7 @@ static u8 usb6fire_fw_ihex_hex(const u8 *data, u8 *crc)
 
 /*
  * returns true if record is available, false otherwise.
- * iff an error occured, false will be returned and record->error will be true.
+ * iff an error occurred, false will be returned and record->error will be true.
  */
 static bool usb6fire_fw_ihex_next_record(struct ihex_record *record)
 {
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 5b792d2c806..f079b5e2ab2 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -176,9 +176,11 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
 			if (!rate)
 				continue;
 			/* C-Media CM6501 mislabels its 96 kHz altsetting */
+			/* Terratec Aureon 7.1 USB C-Media 6206, too */
 			if (rate == 48000 && nr_rates == 1 &&
 			    (chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
-			     chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
+			     chip->usb_id == USB_ID(0x0d8c, 0x0102) ||
+			     chip->usb_id == USB_ID(0x0ccd, 0x00b1)) &&
 			    fp->altsetting == 5 && fp->maxpacksize == 392)
 				rate = 96000;
 			/* Creative VF0470 Live Cam reports 16 kHz instead of 8kHz */
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index b4b39c0b6c9..f9289102886 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1301,6 +1301,7 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi* umidi,
 	case USB_ID(0x15ca, 0x0101): /* Textech USB Midi Cable */
 	case USB_ID(0x15ca, 0x1806): /* Textech USB Midi Cable */
 	case USB_ID(0x1a86, 0x752d): /* QinHeng CH345 "USB2.0-MIDI" */
+	case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */
 		ep->max_transfer = 4;
 		break;
 		/*
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 5e477571660..6ec33b62e6c 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1182,7 +1182,7 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
 /*
  * parse a feature unit
  *
- * most of controlls are defined here.
+ * most of controls are defined here.
  */
 static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void *_ftr)
 {
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 355759bad58..1b94ec3a336 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -266,7 +266,7 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip,
  * audio-interface quirks
  *
  * returns zero if no standard audio/MIDI parsing is needed.
- * returns a postive value if standard audio/midi interfaces are parsed
+ * returns a positive value if standard audio/midi interfaces are parsed
  * after this.
  * returns a negative value at error.
  */
@@ -533,6 +533,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 
 	case USB_ID(0x0d8c, 0x0102):
 		/* C-Media CM6206 / CM106-Like Sound Device */
+	case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
 		return snd_usb_cm6206_boot_quirk(dev);
 
 	case USB_ID(0x133e, 0x0815):
diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c
index 287ef73b123..a51340f6f2d 100644
--- a/sound/usb/usx2y/usx2yhwdeppcm.c
+++ b/sound/usb/usx2y/usx2yhwdeppcm.c
@@ -20,7 +20,7 @@
  at standard samplerates,
  what led to this part of the usx2y module: 
  It provides the alsa kernel half of the usx2y-alsa-jack driver pair.
- The pair uses a hardware dependant alsa-device for mmaped pcm transport.
+ The pair uses a hardware dependent alsa-device for mmaped pcm transport.
  Advantage achieved:
          The usb_hc moves pcm data from/into memory via DMA.
          That memory is mmaped by jack's usx2y driver.
@@ -38,7 +38,7 @@
          2periods works but is useless cause of crackling).
 
  This is a first "proof of concept" implementation.
- Later, functionalities should migrate to more apropriate places:
+ Later, functionalities should migrate to more appropriate places:
  Userland:
  - The jackd could mmap its float-pcm buffers directly from alsa-lib.
  - alsa-lib could provide power of 2 period sized shaping combined with int/float
diff --git a/tools/perf/Documentation/perf-script-perl.txt b/tools/perf/Documentation/perf-script-perl.txt
index 5bb41e55a3a..3152cca1550 100644
--- a/tools/perf/Documentation/perf-script-perl.txt
+++ b/tools/perf/Documentation/perf-script-perl.txt
@@ -63,7 +63,6 @@ The format file for the sched_wakep event defines the following fields
         field:unsigned char common_flags;
         field:unsigned char common_preempt_count;
         field:int common_pid;
-        field:int common_lock_depth;
 
         field:char comm[TASK_COMM_LEN];
         field:pid_t pid;
diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt
index 36b38277422..47102206911 100644
--- a/tools/perf/Documentation/perf-script-python.txt
+++ b/tools/perf/Documentation/perf-script-python.txt
@@ -463,7 +463,6 @@ The format file for the sched_wakep event defines the following fields
         field:unsigned char common_flags;
         field:unsigned char common_preempt_count;
         field:int common_pid;
-        field:int common_lock_depth;
 
         field:char comm[TASK_COMM_LEN];
         field:pid_t pid;
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
index 66f040b3072..86c87e214b1 100644
--- a/tools/perf/Documentation/perf-script.txt
+++ b/tools/perf/Documentation/perf-script.txt
@@ -113,13 +113,61 @@ OPTIONS
         Do various checks like samples ordering and lost events.
 
 -f::
---fields
+--fields::
         Comma separated list of fields to print. Options are:
         comm, tid, pid, time, cpu, event, trace, sym. Field
-        list must be prepended with the type, trace, sw or hw,
+        list can be prepended with the type, trace, sw or hw,
         to indicate to which event type the field list applies.
         e.g., -f sw:comm,tid,time,sym  and -f trace:time,cpu,trace
 
+		perf script -f <fields>
+
+	is equivalent to:
+
+		perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
+    
+	i.e., the specified fields apply to all event types if the type string
+	is not given.
+    
+	The arguments are processed in the order received. A later usage can
+	reset a prior request. e.g.:
+    
+		-f trace: -f comm,tid,time,sym
+    
+	The first -f suppresses trace events (field list is ""), but then the
+	second invocation sets the fields to comm,tid,time,sym. In this case a
+	warning is given to the user:
+    
+		"Overriding previous field request for all events."
+    
+	Alternativey, consider the order:
+    
+		-f comm,tid,time,sym -f trace:
+    
+	The first -f sets the fields for all events and the second -f
+	suppresses trace events. The user is given a warning message about
+	the override, and the result of the above is that only S/W and H/W
+	events are displayed with the given fields.
+    
+	For the 'wildcard' option if a user selected field is invalid for an
+	event type, a message is displayed to the user that the option is
+	ignored for that type. For example:
+    
+		$ perf script -f comm,tid,trace
+		'trace' not valid for hardware events. Ignoring.
+		'trace' not valid for software events. Ignoring.
+    
+	Alternatively, if the type is given an invalid field is specified it
+	is an error. For example:
+    
+        perf script -v -f sw:comm,tid,trace
+        'trace' not valid for software events.
+    
+	At this point usage is displayed, and perf-script exits.
+    
+	Finally, a user may not set fields to none for all event types.
+	i.e., -f "" is not allowed.
+
 -k::
 --vmlinux=<file>::
         vmlinux pathname
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 158c30e8210..1455413ec7a 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -5,6 +5,8 @@ endif
 # The default target of this Makefile is...
 all:
 
+include config/utilities.mak
+
 ifneq ($(OUTPUT),)
 # check that the output directory actually exists
 OUTDIR := $(shell cd $(OUTPUT) && /bin/pwd)
@@ -13,6 +15,12 @@ endif
 
 # Define V to have a more verbose compile.
 #
+# Define PYTHON to point to the python binary if the default
+# `python' is not correct; for example: PYTHON=python2
+#
+# Define PYTHON_CONFIG to point to the python-config binary if
+# the default `$(PYTHON)-config' is not correct.
+#
 # Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
 #
 # Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
@@ -35,15 +43,21 @@ ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
 				  -e s/sh[234].*/sh/ )
 
+CC = $(CROSS_COMPILE)gcc
+AR = $(CROSS_COMPILE)ar
+
 # Additional ARCH settings for x86
 ifeq ($(ARCH),i386)
         ARCH := x86
 endif
 ifeq ($(ARCH),x86_64)
-	RAW_ARCH := x86_64
-        ARCH := x86
-	ARCH_CFLAGS := -DARCH_X86_64
-	ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S
+	ARCH := x86
+	IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -xc - | tail -n 1)
+	ifeq (${IS_X86_64}, 1)
+		RAW_ARCH := x86_64
+		ARCH_CFLAGS := -DARCH_X86_64
+		ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S
+	endif
 endif
 
 #
@@ -119,8 +133,6 @@ lib = lib
 
 export prefix bindir sharedir sysconfdir
 
-CC = $(CROSS_COMPILE)gcc
-AR = $(CROSS_COMPILE)ar
 RM = rm -f
 MKDIR = mkdir
 FIND = find
@@ -130,7 +142,7 @@ INSTALL = install
 # explicitly what architecture to check for. Fix this up for yours..
 SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
 
--include feature-tests.mak
+-include config/feature-tests.mak
 
 ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -fstack-protector-all),y)
 	CFLAGS := $(CFLAGS) -fstack-protector-all
@@ -165,8 +177,10 @@ grep-libs = $(filter -l%,$(1))
 strip-libs = $(filter-out -l%,$(1))
 
 $(OUTPUT)python/perf.so: $(PYRF_OBJS)
-	$(QUIET_GEN)python util/setup.py --quiet  build_ext --build-lib='$(OUTPUT)python' \
-						--build-temp='$(OUTPUT)python/temp'
+	$(QUIET_GEN)CFLAGS='$(BASIC_CFLAGS)' $(PYTHON_WORD) util/setup.py \
+	  --quiet build_ext \
+	  --build-lib='$(OUTPUT)python' \
+	  --build-temp='$(OUTPUT)python/temp'
 #
 # No Perl scripts right now:
 #
@@ -471,24 +485,74 @@ else
 	endif
 endif
 
-ifdef NO_LIBPYTHON
-	BASIC_CFLAGS += -DNO_LIBPYTHON
+disable-python = $(eval $(disable-python_code))
+define disable-python_code
+  BASIC_CFLAGS += -DNO_LIBPYTHON
+  $(if $(1),$(warning No $(1) was found))
+  $(warning Python support won't be built)
+endef
+
+override PYTHON := \
+  $(call get-executable-or-default,PYTHON,python)
+
+ifndef PYTHON
+  $(call disable-python,python interpreter)
+  python-clean :=
 else
-       PYTHON_EMBED_LDOPTS = $(shell python-config --ldflags 2>/dev/null)
-       PYTHON_EMBED_LDFLAGS = $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
-       PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
-	PYTHON_EMBED_CCOPTS = `python-config --cflags 2>/dev/null`
-	FLAGS_PYTHON_EMBED=$(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
-	ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
-		msg := $(warning No Python.h found, install python-dev[el] to have python support in 'perf script' and to build the python bindings)
-		BASIC_CFLAGS += -DNO_LIBPYTHON
-	else
-               ALL_LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
-               EXTLIBS += $(PYTHON_EMBED_LIBADD)
-		LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
-		LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
-		LANG_BINDINGS += $(OUTPUT)python/perf.so
-	endif
+
+  PYTHON_WORD := $(call shell-wordify,$(PYTHON))
+
+  python-clean := $(PYTHON_WORD) util/setup.py clean \
+    --build-lib='$(OUTPUT)python' \
+    --build-temp='$(OUTPUT)python/temp'
+
+  ifdef NO_LIBPYTHON
+    $(call disable-python)
+  else
+
+    override PYTHON_CONFIG := \
+      $(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON)-config)
+
+    ifndef PYTHON_CONFIG
+      $(call disable-python,python-config tool)
+    else
+
+      PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
+
+      PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+      PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
+      PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
+      PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
+      FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
+
+      ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
+        $(call disable-python,Python.h (for Python 2.x))
+      else
+
+        ifneq ($(call try-cc,$(SOURCE_PYTHON_VERSION),$(FLAGS_PYTHON_EMBED)),y)
+          $(warning Python 3 is not yet supported; please set)
+          $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
+          $(warning If you also have Python 2 installed, then)
+          $(warning try something like:)
+          $(warning $(and ,))
+          $(warning $(and ,)  make PYTHON=python2)
+          $(warning $(and ,))
+          $(warning Otherwise, disable Python support entirely:)
+          $(warning $(and ,))
+          $(warning $(and ,)  make NO_LIBPYTHON=1)
+          $(warning $(and ,))
+          $(error   $(and ,))
+        else
+          ALL_LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
+          EXTLIBS += $(PYTHON_EMBED_LIBADD)
+          LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
+          LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
+          LANG_BINDINGS += $(OUTPUT)python/perf.so
+        endif
+
+      endif
+    endif
+  endif
 endif
 
 ifdef NO_DEMANGLE
@@ -829,8 +893,7 @@ clean:
 	$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
 	$(MAKE) -C Documentation/ clean
 	$(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS
-	@python util/setup.py clean --build-lib='$(OUTPUT)python' \
-				   --build-temp='$(OUTPUT)python/temp'
+	$(python-clean)
 
 .PHONY: all install clean strip
 .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 6febcc168a8..0974f957b8f 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -41,7 +41,7 @@ static u64			user_interval			= ULLONG_MAX;
 static u64			default_interval		=      0;
 
 static unsigned int		page_size;
-static unsigned int		mmap_pages			=    128;
+static unsigned int		mmap_pages			= UINT_MAX;
 static unsigned int		user_freq 			= UINT_MAX;
 static int			freq				=   1000;
 static int			output;
@@ -163,6 +163,7 @@ static void config_attr(struct perf_evsel *evsel, struct perf_evlist *evlist)
 	struct perf_event_attr *attr = &evsel->attr;
 	int track = !evsel->idx; /* only the first counter needs these */
 
+	attr->inherit		= !no_inherit;
 	attr->read_format	= PERF_FORMAT_TOTAL_TIME_ENABLED |
 				  PERF_FORMAT_TOTAL_TIME_RUNNING |
 				  PERF_FORMAT_ID;
@@ -251,6 +252,9 @@ static void open_counters(struct perf_evlist *evlist)
 {
 	struct perf_evsel *pos;
 
+	if (evlist->cpus->map[0] < 0)
+		no_inherit = true;
+
 	list_for_each_entry(pos, &evlist->entries, node) {
 		struct perf_event_attr *attr = &pos->attr;
 		/*
@@ -271,15 +275,13 @@ static void open_counters(struct perf_evlist *evlist)
 retry_sample_id:
 		attr->sample_id_all = sample_id_all_avail ? 1 : 0;
 try_again:
-		if (perf_evsel__open(pos, evlist->cpus, evlist->threads, group,
-				     !no_inherit) < 0) {
+		if (perf_evsel__open(pos, evlist->cpus, evlist->threads, group) < 0) {
 			int err = errno;
 
-			if (err == EPERM || err == EACCES)
-				die("Permission error - are you root?\n"
-					"\t Consider tweaking"
-					" /proc/sys/kernel/perf_event_paranoid.\n");
-			else if (err ==  ENODEV && cpu_list) {
+			if (err == EPERM || err == EACCES) {
+				ui__warning_paranoid();
+				exit(EXIT_FAILURE);
+			} else if (err ==  ENODEV && cpu_list) {
 				die("No such device - did you specify"
 					" an out-of-range profile CPU?\n");
 			} else if (err == EINVAL && sample_id_all_avail) {
@@ -302,11 +304,19 @@ try_again:
 					&& attr->config == PERF_COUNT_HW_CPU_CYCLES) {
 
 				if (verbose)
-					warning(" ... trying to fall back to cpu-clock-ticks\n");
+					ui__warning("The cycles event is not supported, "
+						    "trying to fall back to cpu-clock-ticks\n");
 				attr->type = PERF_TYPE_SOFTWARE;
 				attr->config = PERF_COUNT_SW_CPU_CLOCK;
 				goto try_again;
 			}
+
+			if (err == ENOENT) {
+				ui__warning("The %s event is not supported.\n",
+					    event_name(pos));
+				exit(EXIT_FAILURE);
+			}
+
 			printf("\n");
 			error("sys_perf_event_open() syscall returned with %d (%s).  /bin/dmesg may provide additional information.\n",
 			      err, strerror(err));
@@ -417,7 +427,7 @@ static void mmap_read_all(void)
 {
 	int i;
 
-	for (i = 0; i < evsel_list->cpus->nr; i++) {
+	for (i = 0; i < evsel_list->nr_mmaps; i++) {
 		if (evsel_list->mmap[i].base)
 			mmap_read(&evsel_list->mmap[i]);
 	}
@@ -506,6 +516,10 @@ static int __cmd_record(int argc, const char **argv)
 	if (have_tracepoints(&evsel_list->entries))
 		perf_header__set_feat(&session->header, HEADER_TRACE_INFO);
 
+	/* 512 kiB: default amount of unprivileged mlocked memory */
+	if (mmap_pages == UINT_MAX)
+		mmap_pages = (512 * 1024) / page_size;
+
 	if (forks) {
 		child_pid = fork();
 		if (child_pid < 0) {
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index ac574ea2391..974f6d3f4e5 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -49,57 +49,169 @@ struct output_option {
 };
 
 /* default set to maintain compatibility with current format */
-static u64 output_fields[PERF_TYPE_MAX] = {
-	[PERF_TYPE_HARDWARE] = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | \
-			       PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | \
-			       PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
-
-	[PERF_TYPE_SOFTWARE] = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | \
-			       PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | \
-			       PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
-
-	[PERF_TYPE_TRACEPOINT] = PERF_OUTPUT_COMM | PERF_OUTPUT_TID | \
-				 PERF_OUTPUT_CPU | PERF_OUTPUT_TIME | \
-				 PERF_OUTPUT_EVNAME | PERF_OUTPUT_TRACE,
+static struct {
+	bool user_set;
+	bool wildcard_set;
+	u64 fields;
+	u64 invalid_fields;
+} output[PERF_TYPE_MAX] = {
+
+	[PERF_TYPE_HARDWARE] = {
+		.user_set = false,
+
+		.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
+			      PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
+			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+
+		.invalid_fields = PERF_OUTPUT_TRACE,
+	},
+
+	[PERF_TYPE_SOFTWARE] = {
+		.user_set = false,
+
+		.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
+			      PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
+			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+
+		.invalid_fields = PERF_OUTPUT_TRACE,
+	},
+
+	[PERF_TYPE_TRACEPOINT] = {
+		.user_set = false,
+
+		.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
+				  PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
+				  PERF_OUTPUT_EVNAME | PERF_OUTPUT_TRACE,
+	},
+
+	[PERF_TYPE_RAW] = {
+		.user_set = false,
+
+		.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
+			      PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
+			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+
+		.invalid_fields = PERF_OUTPUT_TRACE,
+	},
 };
 
-static bool output_set_by_user;
+static bool output_set_by_user(void)
+{
+	int j;
+	for (j = 0; j < PERF_TYPE_MAX; ++j) {
+		if (output[j].user_set)
+			return true;
+	}
+	return false;
+}
+
+static const char *output_field2str(enum perf_output_field field)
+{
+	int i, imax = ARRAY_SIZE(all_output_options);
+	const char *str = "";
+
+	for (i = 0; i < imax; ++i) {
+		if (all_output_options[i].field == field) {
+			str = all_output_options[i].str;
+			break;
+		}
+	}
+	return str;
+}
 
-#define PRINT_FIELD(x)  (output_fields[attr->type] & PERF_OUTPUT_##x)
+#define PRINT_FIELD(x)  (output[attr->type].fields & PERF_OUTPUT_##x)
 
-static int perf_session__check_attr(struct perf_session *session,
-				    struct perf_event_attr *attr)
+static int perf_event_attr__check_stype(struct perf_event_attr *attr,
+				  u64 sample_type, const char *sample_msg,
+				  enum perf_output_field field)
 {
+	int type = attr->type;
+	const char *evname;
+
+	if (attr->sample_type & sample_type)
+		return 0;
+
+	if (output[type].user_set) {
+		evname = __event_name(attr->type, attr->config);
+		pr_err("Samples for '%s' event do not have %s attribute set. "
+		       "Cannot print '%s' field.\n",
+		       evname, sample_msg, output_field2str(field));
+		return -1;
+	}
+
+	/* user did not ask for it explicitly so remove from the default list */
+	output[type].fields &= ~field;
+	evname = __event_name(attr->type, attr->config);
+	pr_debug("Samples for '%s' event do not have %s attribute set. "
+		 "Skipping '%s' field.\n",
+		 evname, sample_msg, output_field2str(field));
+
+	return 0;
+}
+
+static int perf_evsel__check_attr(struct perf_evsel *evsel,
+				  struct perf_session *session)
+{
+	struct perf_event_attr *attr = &evsel->attr;
+
 	if (PRINT_FIELD(TRACE) &&
 		!perf_session__has_traces(session, "record -R"))
 		return -EINVAL;
 
 	if (PRINT_FIELD(SYM)) {
-		if (!(session->sample_type & PERF_SAMPLE_IP)) {
-			pr_err("Samples do not contain IP data.\n");
+		if (perf_event_attr__check_stype(attr, PERF_SAMPLE_IP, "IP",
+					   PERF_OUTPUT_SYM))
 			return -EINVAL;
-		}
+
 		if (!no_callchain &&
-		    !(session->sample_type & PERF_SAMPLE_CALLCHAIN))
+		    !(attr->sample_type & PERF_SAMPLE_CALLCHAIN))
 			symbol_conf.use_callchain = false;
 	}
 
 	if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
-		!(session->sample_type & PERF_SAMPLE_TID)) {
-		pr_err("Samples do not contain TID/PID data.\n");
+		perf_event_attr__check_stype(attr, PERF_SAMPLE_TID, "TID",
+				       PERF_OUTPUT_TID|PERF_OUTPUT_PID))
 		return -EINVAL;
-	}
 
 	if (PRINT_FIELD(TIME) &&
-		!(session->sample_type & PERF_SAMPLE_TIME)) {
-		pr_err("Samples do not contain timestamps.\n");
+		perf_event_attr__check_stype(attr, PERF_SAMPLE_TIME, "TIME",
+				       PERF_OUTPUT_TIME))
 		return -EINVAL;
-	}
 
 	if (PRINT_FIELD(CPU) &&
-		!(session->sample_type & PERF_SAMPLE_CPU)) {
-		pr_err("Samples do not contain cpu.\n");
+		perf_event_attr__check_stype(attr, PERF_SAMPLE_CPU, "CPU",
+				       PERF_OUTPUT_CPU))
 		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * verify all user requested events exist and the samples
+ * have the expected data
+ */
+static int perf_session__check_output_opt(struct perf_session *session)
+{
+	int j;
+	struct perf_evsel *evsel;
+
+	for (j = 0; j < PERF_TYPE_MAX; ++j) {
+		evsel = perf_session__find_first_evtype(session, j);
+
+		/*
+		 * even if fields is set to 0 (ie., show nothing) event must
+		 * exist if user explicitly includes it on the command line
+		 */
+		if (!evsel && output[j].user_set && !output[j].wildcard_set) {
+			pr_err("%s events do not exist. "
+			       "Remove corresponding -f option to proceed.\n",
+			       event_type(j));
+			return -1;
+		}
+
+		if (evsel && output[j].fields &&
+			perf_evsel__check_attr(evsel, session))
+			return -1;
 	}
 
 	return 0;
@@ -168,10 +280,7 @@ static void process_event(union perf_event *event __unused,
 {
 	struct perf_event_attr *attr = &evsel->attr;
 
-	if (output_fields[attr->type] == 0)
-		return;
-
-	if (perf_session__check_attr(session, attr) < 0)
+	if (output[attr->type].fields == 0)
 		return;
 
 	print_sample_start(sample, thread, attr);
@@ -451,6 +560,7 @@ static int parse_output_fields(const struct option *opt __used,
 {
 	char *tok;
 	int i, imax = sizeof(all_output_options) / sizeof(struct output_option);
+	int j;
 	int rc = 0;
 	char *str = strdup(arg);
 	int type = -1;
@@ -458,52 +568,99 @@ static int parse_output_fields(const struct option *opt __used,
 	if (!str)
 		return -ENOMEM;
 
-	tok = strtok(str, ":");
-	if (!tok) {
-		fprintf(stderr,
-			"Invalid field string - not prepended with type.");
-		return -EINVAL;
-	}
-
-	/* first word should state which event type user
-	 * is specifying the fields
+	/* first word can state for which event type the user is specifying
+	 * the fields. If no type exists, the specified fields apply to all
+	 * event types found in the file minus the invalid fields for a type.
 	 */
-	if (!strcmp(tok, "hw"))
-		type = PERF_TYPE_HARDWARE;
-	else if (!strcmp(tok, "sw"))
-		type = PERF_TYPE_SOFTWARE;
-	else if (!strcmp(tok, "trace"))
-		type = PERF_TYPE_TRACEPOINT;
-	else {
-		fprintf(stderr, "Invalid event type in field string.");
-		return -EINVAL;
+	tok = strchr(str, ':');
+	if (tok) {
+		*tok = '\0';
+		tok++;
+		if (!strcmp(str, "hw"))
+			type = PERF_TYPE_HARDWARE;
+		else if (!strcmp(str, "sw"))
+			type = PERF_TYPE_SOFTWARE;
+		else if (!strcmp(str, "trace"))
+			type = PERF_TYPE_TRACEPOINT;
+		else if (!strcmp(str, "raw"))
+			type = PERF_TYPE_RAW;
+		else {
+			fprintf(stderr, "Invalid event type in field string.\n");
+			return -EINVAL;
+		}
+
+		if (output[type].user_set)
+			pr_warning("Overriding previous field request for %s events.\n",
+				   event_type(type));
+
+		output[type].fields = 0;
+		output[type].user_set = true;
+		output[type].wildcard_set = false;
+
+	} else {
+		tok = str;
+		if (strlen(str) == 0) {
+			fprintf(stderr,
+				"Cannot set fields to 'none' for all event types.\n");
+			rc = -EINVAL;
+			goto out;
+		}
+
+		if (output_set_by_user())
+			pr_warning("Overriding previous field request for all events.\n");
+
+		for (j = 0; j < PERF_TYPE_MAX; ++j) {
+			output[j].fields = 0;
+			output[j].user_set = true;
+			output[j].wildcard_set = true;
+		}
 	}
 
-	output_fields[type] = 0;
-	while (1) {
-		tok = strtok(NULL, ",");
-		if (!tok)
-			break;
+	tok = strtok(tok, ",");
+	while (tok) {
 		for (i = 0; i < imax; ++i) {
-			if (strcmp(tok, all_output_options[i].str) == 0) {
-				output_fields[type] |= all_output_options[i].field;
+			if (strcmp(tok, all_output_options[i].str) == 0)
 				break;
-			}
 		}
 		if (i == imax) {
-			fprintf(stderr, "Invalid field requested.");
+			fprintf(stderr, "Invalid field requested.\n");
 			rc = -EINVAL;
-			break;
+			goto out;
 		}
-	}
 
-	if (output_fields[type] == 0) {
-		pr_debug("No fields requested for %s type. "
-			 "Events will not be displayed\n", event_type(type));
+		if (type == -1) {
+			/* add user option to all events types for
+			 * which it is valid
+			 */
+			for (j = 0; j < PERF_TYPE_MAX; ++j) {
+				if (output[j].invalid_fields & all_output_options[i].field) {
+					pr_warning("\'%s\' not valid for %s events. Ignoring.\n",
+						   all_output_options[i].str, event_type(j));
+				} else
+					output[j].fields |= all_output_options[i].field;
+			}
+		} else {
+			if (output[type].invalid_fields & all_output_options[i].field) {
+				fprintf(stderr, "\'%s\' not valid for %s events.\n",
+					 all_output_options[i].str, event_type(type));
+
+				rc = -EINVAL;
+				goto out;
+			}
+			output[type].fields |= all_output_options[i].field;
+		}
+
+		tok = strtok(NULL, ",");
 	}
 
-	output_set_by_user = true;
+	if (type >= 0) {
+		if (output[type].fields == 0) {
+			pr_debug("No fields requested for %s type. "
+				 "Events will not be displayed.\n", event_type(type));
+		}
+	}
 
+out:
 	free(str);
 	return rc;
 }
@@ -829,7 +986,7 @@ static const struct option options[] = {
 	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
 		    "Look for files with symbols relative to this directory"),
 	OPT_CALLBACK('f', "fields", NULL, "str",
-		     "comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace. Fields: comm,tid,pid,time,cpu,event,trace,sym",
+		     "comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw. Fields: comm,tid,pid,time,cpu,event,trace,sym",
 		     parse_output_fields),
 
 	OPT_END()
@@ -1020,7 +1177,7 @@ int cmd_script(int argc, const char **argv, const char *prefix __used)
 		struct stat perf_stat;
 		int input;
 
-		if (output_set_by_user) {
+		if (output_set_by_user()) {
 			fprintf(stderr,
 				"custom fields not supported for generated scripts");
 			return -1;
@@ -1060,6 +1217,11 @@ int cmd_script(int argc, const char **argv, const char *prefix __used)
 		pr_debug("perf script started with script %s\n\n", script_name);
 	}
 
+
+	err = perf_session__check_output_opt(session);
+	if (err < 0)
+		goto out;
+
 	err = __cmd_script(session);
 
 	perf_session__delete(session);
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index e2109f9b43e..a9f06715e44 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -6,24 +6,28 @@
  *
  * Sample output:
 
-   $ perf stat ~/hackbench 10
-   Time: 0.104
+   $ perf stat ./hackbench 10
 
-    Performance counter stats for '/home/mingo/hackbench':
+  Time: 0.118
 
-       1255.538611  task clock ticks     #      10.143 CPU utilization factor
-             54011  context switches     #       0.043 M/sec
-               385  CPU migrations       #       0.000 M/sec
-             17755  pagefaults           #       0.014 M/sec
-        3808323185  CPU cycles           #    3033.219 M/sec
-        1575111190  instructions         #    1254.530 M/sec
-          17367895  cache references     #      13.833 M/sec
-           7674421  cache misses         #       6.112 M/sec
+  Performance counter stats for './hackbench 10':
 
-    Wall-clock time elapsed:   123.786620 msecs
+       1708.761321 task-clock                #   11.037 CPUs utilized
+            41,190 context-switches          #    0.024 M/sec
+             6,735 CPU-migrations            #    0.004 M/sec
+            17,318 page-faults               #    0.010 M/sec
+     5,205,202,243 cycles                    #    3.046 GHz
+     3,856,436,920 stalled-cycles-frontend   #   74.09% frontend cycles idle
+     1,600,790,871 stalled-cycles-backend    #   30.75% backend  cycles idle
+     2,603,501,247 instructions              #    0.50  insns per cycle
+                                             #    1.48  stalled cycles per insn
+       484,357,498 branches                  #  283.455 M/sec
+         6,388,934 branch-misses             #    1.32% of all branches
+
+        0.154822978  seconds time elapsed
 
  *
- * Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
+ * Copyright (C) 2008-2011, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
  *
  * Improvements and fixes by:
  *
@@ -46,6 +50,7 @@
 #include "util/evlist.h"
 #include "util/evsel.h"
 #include "util/debug.h"
+#include "util/color.h"
 #include "util/header.h"
 #include "util/cpumap.h"
 #include "util/thread.h"
@@ -65,14 +70,107 @@ static struct perf_event_attr default_attrs[] = {
   { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS		},
 
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_BACKEND	},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS		},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS	},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES		},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES		},
 
 };
 
+/*
+ * Detailed stats (-d), covering the L1 and last level data caches:
+ */
+static struct perf_event_attr detailed_attrs[] = {
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_LL			<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_LL			<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+};
+
+/*
+ * Very detailed stats (-d -d), covering the instruction cache and the TLB caches:
+ */
+static struct perf_event_attr very_detailed_attrs[] = {
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1I		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1I		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_DTLB		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_DTLB		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_ITLB		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_ITLB		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+
+};
+
+/*
+ * Very, very detailed stats (-d -d -d), adding prefetch events:
+ */
+static struct perf_event_attr very_very_detailed_attrs[] = {
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_PREFETCH	<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_PREFETCH	<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+};
+
+
+
 struct perf_evlist		*evsel_list;
 
 static bool			system_wide			=  false;
@@ -86,6 +184,8 @@ static pid_t			target_pid			= -1;
 static pid_t			target_tid			= -1;
 static pid_t			child_pid			= -1;
 static bool			null_run			=  false;
+static int			detailed_run			=  0;
+static bool			sync_run			=  false;
 static bool			big_num				=  true;
 static int			big_num_opt			=  -1;
 static const char		*cpu_list;
@@ -156,7 +256,15 @@ static double stddev_stats(struct stats *stats)
 
 struct stats			runtime_nsecs_stats[MAX_NR_CPUS];
 struct stats			runtime_cycles_stats[MAX_NR_CPUS];
+struct stats			runtime_stalled_cycles_front_stats[MAX_NR_CPUS];
+struct stats			runtime_stalled_cycles_back_stats[MAX_NR_CPUS];
 struct stats			runtime_branches_stats[MAX_NR_CPUS];
+struct stats			runtime_cacherefs_stats[MAX_NR_CPUS];
+struct stats			runtime_l1_dcache_stats[MAX_NR_CPUS];
+struct stats			runtime_l1_icache_stats[MAX_NR_CPUS];
+struct stats			runtime_ll_cache_stats[MAX_NR_CPUS];
+struct stats			runtime_itlb_cache_stats[MAX_NR_CPUS];
+struct stats			runtime_dtlb_cache_stats[MAX_NR_CPUS];
 struct stats			walltime_nsecs_stats;
 
 static int create_perf_stat_counter(struct perf_evsel *evsel)
@@ -167,16 +275,17 @@ static int create_perf_stat_counter(struct perf_evsel *evsel)
 		attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
 				    PERF_FORMAT_TOTAL_TIME_RUNNING;
 
+	attr->inherit = !no_inherit;
+
 	if (system_wide)
-		return perf_evsel__open_per_cpu(evsel, evsel_list->cpus, false, false);
+		return perf_evsel__open_per_cpu(evsel, evsel_list->cpus, false);
 
-	attr->inherit = !no_inherit;
 	if (target_pid == -1 && target_tid == -1) {
 		attr->disabled = 1;
 		attr->enable_on_exec = 1;
 	}
 
-	return perf_evsel__open_per_thread(evsel, evsel_list->threads, false, false);
+	return perf_evsel__open_per_thread(evsel, evsel_list->threads, false);
 }
 
 /*
@@ -192,6 +301,37 @@ static inline int nsec_counter(struct perf_evsel *evsel)
 }
 
 /*
+ * Update various tracking values we maintain to print
+ * more semantic information such as miss/hit ratios,
+ * instruction rates, etc:
+ */
+static void update_shadow_stats(struct perf_evsel *counter, u64 *count)
+{
+	if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
+		update_stats(&runtime_nsecs_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
+		update_stats(&runtime_cycles_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_FRONTEND))
+		update_stats(&runtime_stalled_cycles_front_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_BACKEND))
+		update_stats(&runtime_stalled_cycles_back_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
+		update_stats(&runtime_branches_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HARDWARE, HW_CACHE_REFERENCES))
+		update_stats(&runtime_cacherefs_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1D))
+		update_stats(&runtime_l1_dcache_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1I))
+		update_stats(&runtime_l1_icache_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_LL))
+		update_stats(&runtime_ll_cache_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_DTLB))
+		update_stats(&runtime_dtlb_cache_stats[0], count[0]);
+	else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_ITLB))
+		update_stats(&runtime_itlb_cache_stats[0], count[0]);
+}
+
+/*
  * Read out the results of a single counter:
  * aggregate counts across CPUs in system-wide mode
  */
@@ -216,12 +356,7 @@ static int read_counter_aggr(struct perf_evsel *counter)
 	/*
 	 * Save the full runtime - to allow normalization during printout:
 	 */
-	if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
-		update_stats(&runtime_nsecs_stats[0], count[0]);
-	if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
-		update_stats(&runtime_cycles_stats[0], count[0]);
-	if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
-		update_stats(&runtime_branches_stats[0], count[0]);
+	update_shadow_stats(counter, count);
 
 	return 0;
 }
@@ -241,12 +376,7 @@ static int read_counter(struct perf_evsel *counter)
 
 		count = counter->counts->cpu[cpu].values;
 
-		if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
-			update_stats(&runtime_nsecs_stats[cpu], count[0]);
-		if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
-			update_stats(&runtime_cycles_stats[cpu], count[0]);
-		if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
-			update_stats(&runtime_branches_stats[cpu], count[0]);
+		update_shadow_stats(counter, count);
 	}
 
 	return 0;
@@ -314,13 +444,18 @@ static int run_perf_stat(int argc __used, const char **argv)
 
 	list_for_each_entry(counter, &evsel_list->entries, node) {
 		if (create_perf_stat_counter(counter) < 0) {
-			if (errno == -EPERM || errno == -EACCES) {
+			if (errno == EINVAL || errno == ENOSYS || errno == ENOENT) {
+				if (verbose)
+					ui__warning("%s event is not supported by the kernel.\n",
+						    event_name(counter));
+				continue;
+			}
+
+			if (errno == EPERM || errno == EACCES) {
 				error("You may not have permission to collect %sstats.\n"
 				      "\t Consider tweaking"
 				      " /proc/sys/kernel/perf_event_paranoid or running as root.",
 				      system_wide ? "system-wide " : "");
-			} else if (errno == ENOENT) {
-				error("%s event is not supported. ", event_name(counter));
 			} else {
 				error("open_counter returned with %d (%s). "
 				      "/bin/dmesg may provide additional information.\n",
@@ -371,6 +506,16 @@ static int run_perf_stat(int argc __used, const char **argv)
 	return WEXITSTATUS(status);
 }
 
+static void print_noise_pct(double total, double avg)
+{
+	double pct = 0.0;
+
+	if (avg)
+		pct = 100.0*total/avg;
+
+	fprintf(stderr, "  ( +-%6.2f%% )", pct);
+}
+
 static void print_noise(struct perf_evsel *evsel, double avg)
 {
 	struct perf_stat *ps;
@@ -379,15 +524,14 @@ static void print_noise(struct perf_evsel *evsel, double avg)
 		return;
 
 	ps = evsel->priv;
-	fprintf(stderr, "   ( +- %7.3f%% )",
-			100 * stddev_stats(&ps->res_stats[0]) / avg);
+	print_noise_pct(stddev_stats(&ps->res_stats[0]), avg);
 }
 
 static void nsec_printout(int cpu, struct perf_evsel *evsel, double avg)
 {
 	double msecs = avg / 1e6;
 	char cpustr[16] = { '\0', };
-	const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-24s";
+	const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-25s";
 
 	if (no_aggr)
 		sprintf(cpustr, "CPU%*d%s",
@@ -403,8 +547,191 @@ static void nsec_printout(int cpu, struct perf_evsel *evsel, double avg)
 		return;
 
 	if (perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK))
-		fprintf(stderr, " # %10.3f CPUs ",
-				avg / avg_stats(&walltime_nsecs_stats));
+		fprintf(stderr, " # %8.3f CPUs utilized          ", avg / avg_stats(&walltime_nsecs_stats));
+}
+
+static void print_stalled_cycles_frontend(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+	double total, ratio = 0.0;
+	const char *color;
+
+	total = avg_stats(&runtime_cycles_stats[cpu]);
+
+	if (total)
+		ratio = avg / total * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 50.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 30.0)
+		color = PERF_COLOR_MAGENTA;
+	else if (ratio > 10.0)
+		color = PERF_COLOR_YELLOW;
+
+	fprintf(stderr, " #  ");
+	color_fprintf(stderr, color, "%6.2f%%", ratio);
+	fprintf(stderr, " frontend cycles idle   ");
+}
+
+static void print_stalled_cycles_backend(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+	double total, ratio = 0.0;
+	const char *color;
+
+	total = avg_stats(&runtime_cycles_stats[cpu]);
+
+	if (total)
+		ratio = avg / total * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 75.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 50.0)
+		color = PERF_COLOR_MAGENTA;
+	else if (ratio > 20.0)
+		color = PERF_COLOR_YELLOW;
+
+	fprintf(stderr, " #  ");
+	color_fprintf(stderr, color, "%6.2f%%", ratio);
+	fprintf(stderr, " backend  cycles idle   ");
+}
+
+static void print_branch_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+	double total, ratio = 0.0;
+	const char *color;
+
+	total = avg_stats(&runtime_branches_stats[cpu]);
+
+	if (total)
+		ratio = avg / total * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 20.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 10.0)
+		color = PERF_COLOR_MAGENTA;
+	else if (ratio > 5.0)
+		color = PERF_COLOR_YELLOW;
+
+	fprintf(stderr, " #  ");
+	color_fprintf(stderr, color, "%6.2f%%", ratio);
+	fprintf(stderr, " of all branches        ");
+}
+
+static void print_l1_dcache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+	double total, ratio = 0.0;
+	const char *color;
+
+	total = avg_stats(&runtime_l1_dcache_stats[cpu]);
+
+	if (total)
+		ratio = avg / total * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 20.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 10.0)
+		color = PERF_COLOR_MAGENTA;
+	else if (ratio > 5.0)
+		color = PERF_COLOR_YELLOW;
+
+	fprintf(stderr, " #  ");
+	color_fprintf(stderr, color, "%6.2f%%", ratio);
+	fprintf(stderr, " of all L1-dcache hits  ");
+}
+
+static void print_l1_icache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+	double total, ratio = 0.0;
+	const char *color;
+
+	total = avg_stats(&runtime_l1_icache_stats[cpu]);
+
+	if (total)
+		ratio = avg / total * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 20.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 10.0)
+		color = PERF_COLOR_MAGENTA;
+	else if (ratio > 5.0)
+		color = PERF_COLOR_YELLOW;
+
+	fprintf(stderr, " #  ");
+	color_fprintf(stderr, color, "%6.2f%%", ratio);
+	fprintf(stderr, " of all L1-icache hits  ");
+}
+
+static void print_dtlb_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+	double total, ratio = 0.0;
+	const char *color;
+
+	total = avg_stats(&runtime_dtlb_cache_stats[cpu]);
+
+	if (total)
+		ratio = avg / total * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 20.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 10.0)
+		color = PERF_COLOR_MAGENTA;
+	else if (ratio > 5.0)
+		color = PERF_COLOR_YELLOW;
+
+	fprintf(stderr, " #  ");
+	color_fprintf(stderr, color, "%6.2f%%", ratio);
+	fprintf(stderr, " of all dTLB cache hits ");
+}
+
+static void print_itlb_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+	double total, ratio = 0.0;
+	const char *color;
+
+	total = avg_stats(&runtime_itlb_cache_stats[cpu]);
+
+	if (total)
+		ratio = avg / total * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 20.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 10.0)
+		color = PERF_COLOR_MAGENTA;
+	else if (ratio > 5.0)
+		color = PERF_COLOR_YELLOW;
+
+	fprintf(stderr, " #  ");
+	color_fprintf(stderr, color, "%6.2f%%", ratio);
+	fprintf(stderr, " of all iTLB cache hits ");
+}
+
+static void print_ll_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg)
+{
+	double total, ratio = 0.0;
+	const char *color;
+
+	total = avg_stats(&runtime_ll_cache_stats[cpu]);
+
+	if (total)
+		ratio = avg / total * 100.0;
+
+	color = PERF_COLOR_NORMAL;
+	if (ratio > 20.0)
+		color = PERF_COLOR_RED;
+	else if (ratio > 10.0)
+		color = PERF_COLOR_MAGENTA;
+	else if (ratio > 5.0)
+		color = PERF_COLOR_YELLOW;
+
+	fprintf(stderr, " #  ");
+	color_fprintf(stderr, color, "%6.2f%%", ratio);
+	fprintf(stderr, " of all LL-cache hits   ");
 }
 
 static void abs_printout(int cpu, struct perf_evsel *evsel, double avg)
@@ -416,9 +743,9 @@ static void abs_printout(int cpu, struct perf_evsel *evsel, double avg)
 	if (csv_output)
 		fmt = "%s%.0f%s%s";
 	else if (big_num)
-		fmt = "%s%'18.0f%s%-24s";
+		fmt = "%s%'18.0f%s%-25s";
 	else
-		fmt = "%s%18.0f%s%-24s";
+		fmt = "%s%18.0f%s%-25s";
 
 	if (no_aggr)
 		sprintf(cpustr, "CPU%*d%s",
@@ -441,23 +768,83 @@ static void abs_printout(int cpu, struct perf_evsel *evsel, double avg)
 		if (total)
 			ratio = avg / total;
 
-		fprintf(stderr, " # %10.3f IPC  ", ratio);
+		fprintf(stderr, " #   %5.2f  insns per cycle        ", ratio);
+
+		total = avg_stats(&runtime_stalled_cycles_front_stats[cpu]);
+		total = max(total, avg_stats(&runtime_stalled_cycles_back_stats[cpu]));
+
+		if (total && avg) {
+			ratio = total / avg;
+			fprintf(stderr, "\n                                             #   %5.2f  stalled cycles per insn", ratio);
+		}
+
 	} else if (perf_evsel__match(evsel, HARDWARE, HW_BRANCH_MISSES) &&
 			runtime_branches_stats[cpu].n != 0) {
-		total = avg_stats(&runtime_branches_stats[cpu]);
+		print_branch_misses(cpu, evsel, avg);
+	} else if (
+		evsel->attr.type == PERF_TYPE_HW_CACHE &&
+		evsel->attr.config ==  ( PERF_COUNT_HW_CACHE_L1D |
+					((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+					((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+			runtime_l1_dcache_stats[cpu].n != 0) {
+		print_l1_dcache_misses(cpu, evsel, avg);
+	} else if (
+		evsel->attr.type == PERF_TYPE_HW_CACHE &&
+		evsel->attr.config ==  ( PERF_COUNT_HW_CACHE_L1I |
+					((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+					((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+			runtime_l1_icache_stats[cpu].n != 0) {
+		print_l1_icache_misses(cpu, evsel, avg);
+	} else if (
+		evsel->attr.type == PERF_TYPE_HW_CACHE &&
+		evsel->attr.config ==  ( PERF_COUNT_HW_CACHE_DTLB |
+					((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+					((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+			runtime_dtlb_cache_stats[cpu].n != 0) {
+		print_dtlb_cache_misses(cpu, evsel, avg);
+	} else if (
+		evsel->attr.type == PERF_TYPE_HW_CACHE &&
+		evsel->attr.config ==  ( PERF_COUNT_HW_CACHE_ITLB |
+					((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+					((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+			runtime_itlb_cache_stats[cpu].n != 0) {
+		print_itlb_cache_misses(cpu, evsel, avg);
+	} else if (
+		evsel->attr.type == PERF_TYPE_HW_CACHE &&
+		evsel->attr.config ==  ( PERF_COUNT_HW_CACHE_LL |
+					((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
+					((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) &&
+			runtime_ll_cache_stats[cpu].n != 0) {
+		print_ll_cache_misses(cpu, evsel, avg);
+	} else if (perf_evsel__match(evsel, HARDWARE, HW_CACHE_MISSES) &&
+			runtime_cacherefs_stats[cpu].n != 0) {
+		total = avg_stats(&runtime_cacherefs_stats[cpu]);
 
 		if (total)
 			ratio = avg * 100 / total;
 
-		fprintf(stderr, " # %10.3f %%    ", ratio);
+		fprintf(stderr, " # %8.3f %% of all cache refs    ", ratio);
 
+	} else if (perf_evsel__match(evsel, HARDWARE, HW_STALLED_CYCLES_FRONTEND)) {
+		print_stalled_cycles_frontend(cpu, evsel, avg);
+	} else if (perf_evsel__match(evsel, HARDWARE, HW_STALLED_CYCLES_BACKEND)) {
+		print_stalled_cycles_backend(cpu, evsel, avg);
+	} else if (perf_evsel__match(evsel, HARDWARE, HW_CPU_CYCLES)) {
+		total = avg_stats(&runtime_nsecs_stats[cpu]);
+
+		if (total)
+			ratio = 1.0 * avg / total;
+
+		fprintf(stderr, " # %8.3f GHz                    ", ratio);
 	} else if (runtime_nsecs_stats[cpu].n != 0) {
 		total = avg_stats(&runtime_nsecs_stats[cpu]);
 
 		if (total)
 			ratio = 1000.0 * avg / total;
 
-		fprintf(stderr, " # %10.3f M/sec", ratio);
+		fprintf(stderr, " # %8.3f M/sec                  ", ratio);
+	} else {
+		fprintf(stderr, "                                   ");
 	}
 }
 
@@ -504,8 +891,7 @@ static void print_counter_aggr(struct perf_evsel *counter)
 		avg_enabled = avg_stats(&ps->res_stats[1]);
 		avg_running = avg_stats(&ps->res_stats[2]);
 
-		fprintf(stderr, "  (scaled from %.2f%%)",
-				100 * avg_running / avg_enabled);
+		fprintf(stderr, " [%5.2f%%]", 100 * avg_running / avg_enabled);
 	}
 	fprintf(stderr, "\n");
 }
@@ -547,10 +933,8 @@ static void print_counter(struct perf_evsel *counter)
 		if (!csv_output) {
 			print_noise(counter, 1.0);
 
-			if (run != ena) {
-				fprintf(stderr, "  (scaled from %.2f%%)",
-					100.0 * run / ena);
-			}
+			if (run != ena)
+				fprintf(stderr, "  (%.2f%%)", 100.0 * run / ena);
 		}
 		fputc('\n', stderr);
 	}
@@ -590,13 +974,14 @@ static void print_stat(int argc, const char **argv)
 	}
 
 	if (!csv_output) {
-		fprintf(stderr, "\n");
-		fprintf(stderr, " %18.9f  seconds time elapsed",
+		if (!null_run)
+			fprintf(stderr, "\n");
+		fprintf(stderr, " %17.9f seconds time elapsed",
 				avg_stats(&walltime_nsecs_stats)/1e9);
 		if (run_count > 1) {
-			fprintf(stderr, "   ( +- %7.3f%% )",
-				100*stddev_stats(&walltime_nsecs_stats) /
-				avg_stats(&walltime_nsecs_stats));
+			fprintf(stderr, "                                        ");
+			print_noise_pct(stddev_stats(&walltime_nsecs_stats),
+					avg_stats(&walltime_nsecs_stats));
 		}
 		fprintf(stderr, "\n\n");
 	}
@@ -658,6 +1043,10 @@ static const struct option options[] = {
 		    "repeat command and print average + stddev (max: 100)"),
 	OPT_BOOLEAN('n', "null", &null_run,
 		    "null run - dont start any counters"),
+	OPT_INCR('d', "detailed", &detailed_run,
+		    "detailed run - start a lot of events"),
+	OPT_BOOLEAN('S', "sync", &sync_run,
+		    "call sync() before starting a run"),
 	OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL, 
 			   "print large numbers with thousands\' separators",
 			   stat__set_big_num),
@@ -673,6 +1062,70 @@ static const struct option options[] = {
 	OPT_END()
 };
 
+/*
+ * Add default attributes, if there were no attributes specified or
+ * if -d/--detailed, -d -d or -d -d -d is used:
+ */
+static int add_default_attributes(void)
+{
+	struct perf_evsel *pos;
+	size_t attr_nr = 0;
+	size_t c;
+
+	/* Set attrs if no event is selected and !null_run: */
+	if (null_run)
+		return 0;
+
+	if (!evsel_list->nr_entries) {
+		for (c = 0; c < ARRAY_SIZE(default_attrs); c++) {
+			pos = perf_evsel__new(default_attrs + c, c + attr_nr);
+			if (pos == NULL)
+				return -1;
+			perf_evlist__add(evsel_list, pos);
+		}
+		attr_nr += c;
+	}
+
+	/* Detailed events get appended to the event list: */
+
+	if (detailed_run <  1)
+		return 0;
+
+	/* Append detailed run extra attributes: */
+	for (c = 0; c < ARRAY_SIZE(detailed_attrs); c++) {
+		pos = perf_evsel__new(detailed_attrs + c, c + attr_nr);
+		if (pos == NULL)
+			return -1;
+		perf_evlist__add(evsel_list, pos);
+	}
+	attr_nr += c;
+
+	if (detailed_run < 2)
+		return 0;
+
+	/* Append very detailed run extra attributes: */
+	for (c = 0; c < ARRAY_SIZE(very_detailed_attrs); c++) {
+		pos = perf_evsel__new(very_detailed_attrs + c, c + attr_nr);
+		if (pos == NULL)
+			return -1;
+		perf_evlist__add(evsel_list, pos);
+	}
+
+	if (detailed_run < 3)
+		return 0;
+
+	/* Append very, very detailed run extra attributes: */
+	for (c = 0; c < ARRAY_SIZE(very_very_detailed_attrs); c++) {
+		pos = perf_evsel__new(very_very_detailed_attrs + c, c + attr_nr);
+		if (pos == NULL)
+			return -1;
+		perf_evlist__add(evsel_list, pos);
+	}
+
+
+	return 0;
+}
+
 int cmd_stat(int argc, const char **argv, const char *prefix __used)
 {
 	struct perf_evsel *pos;
@@ -718,17 +1171,8 @@ int cmd_stat(int argc, const char **argv, const char *prefix __used)
 		usage_with_options(stat_usage, options);
 	}
 
-	/* Set attrs and nr_counters if no event is selected and !null_run */
-	if (!null_run && !evsel_list->nr_entries) {
-		size_t c;
-
-		for (c = 0; c < ARRAY_SIZE(default_attrs); ++c) {
-			pos = perf_evsel__new(&default_attrs[c], c);
-			if (pos == NULL)
-				goto out;
-			perf_evlist__add(evsel_list, pos);
-		}
-	}
+	if (add_default_attributes())
+		goto out;
 
 	if (target_pid != -1)
 		target_tid = target_pid;
@@ -772,6 +1216,10 @@ int cmd_stat(int argc, const char **argv, const char *prefix __used)
 	for (run_idx = 0; run_idx < run_count; run_idx++) {
 		if (run_count != 1 && verbose)
 			fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1);
+
+		if (sync_run)
+			sync();
+
 		status = run_perf_stat(argc, argv);
 	}
 
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 1b2106c58f6..2f9a337b182 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -290,7 +290,7 @@ static int test__open_syscall_event(void)
 		goto out_thread_map_delete;
 	}
 
-	if (perf_evsel__open_per_thread(evsel, threads, false, false) < 0) {
+	if (perf_evsel__open_per_thread(evsel, threads, false) < 0) {
 		pr_debug("failed to open counter: %s, "
 			 "tweak /proc/sys/kernel/perf_event_paranoid?\n",
 			 strerror(errno));
@@ -303,7 +303,7 @@ static int test__open_syscall_event(void)
 	}
 
 	if (perf_evsel__read_on_cpu(evsel, 0, 0) < 0) {
-		pr_debug("perf_evsel__open_read_on_cpu\n");
+		pr_debug("perf_evsel__read_on_cpu\n");
 		goto out_close_fd;
 	}
 
@@ -365,7 +365,7 @@ static int test__open_syscall_event_on_all_cpus(void)
 		goto out_thread_map_delete;
 	}
 
-	if (perf_evsel__open(evsel, cpus, threads, false, false) < 0) {
+	if (perf_evsel__open(evsel, cpus, threads, false) < 0) {
 		pr_debug("failed to open counter: %s, "
 			 "tweak /proc/sys/kernel/perf_event_paranoid?\n",
 			 strerror(errno));
@@ -418,7 +418,7 @@ static int test__open_syscall_event_on_all_cpus(void)
 			continue;
 
 		if (perf_evsel__read_on_cpu(evsel, cpu, 0) < 0) {
-			pr_debug("perf_evsel__open_read_on_cpu\n");
+			pr_debug("perf_evsel__read_on_cpu\n");
 			err = -1;
 			break;
 		}
@@ -529,7 +529,7 @@ static int test__basic_mmap(void)
 
 		perf_evlist__add(evlist, evsels[i]);
 
-		if (perf_evsel__open(evsels[i], cpus, threads, false, false) < 0) {
+		if (perf_evsel__open(evsels[i], cpus, threads, false) < 0) {
 			pr_debug("failed to open counter: %s, "
 				 "tweak /proc/sys/kernel/perf_event_paranoid?\n",
 				 strerror(errno));
@@ -549,7 +549,7 @@ static int test__basic_mmap(void)
 			++foo;
 		}
 
-	while ((event = perf_evlist__read_on_cpu(evlist, 0)) != NULL) {
+	while ((event = perf_evlist__mmap_read(evlist, 0)) != NULL) {
 		struct perf_sample sample;
 
 		if (event->header.type != PERF_RECORD_SAMPLE) {
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 676b4fb0070..ebfc7cf5f63 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -801,12 +801,12 @@ static void perf_event__process_sample(const union perf_event *event,
 	}
 }
 
-static void perf_session__mmap_read_cpu(struct perf_session *self, int cpu)
+static void perf_session__mmap_read_idx(struct perf_session *self, int idx)
 {
 	struct perf_sample sample;
 	union perf_event *event;
 
-	while ((event = perf_evlist__read_on_cpu(top.evlist, cpu)) != NULL) {
+	while ((event = perf_evlist__mmap_read(top.evlist, idx)) != NULL) {
 		perf_session__parse_sample(self, event, &sample);
 
 		if (event->header.type == PERF_RECORD_SAMPLE)
@@ -820,8 +820,8 @@ static void perf_session__mmap_read(struct perf_session *self)
 {
 	int i;
 
-	for (i = 0; i < top.evlist->cpus->nr; i++)
-		perf_session__mmap_read_cpu(self, i);
+	for (i = 0; i < top.evlist->nr_mmaps; i++)
+		perf_session__mmap_read_idx(self, i);
 }
 
 static void start_counters(struct perf_evlist *evlist)
@@ -845,15 +845,16 @@ static void start_counters(struct perf_evlist *evlist)
 		}
 
 		attr->mmap = 1;
+		attr->inherit = inherit;
 try_again:
 		if (perf_evsel__open(counter, top.evlist->cpus,
-				     top.evlist->threads, group, inherit) < 0) {
+				     top.evlist->threads, group) < 0) {
 			int err = errno;
 
-			if (err == EPERM || err == EACCES)
-				die("Permission error - are you root?\n"
-					"\t Consider tweaking"
-					" /proc/sys/kernel/perf_event_paranoid.\n");
+			if (err == EPERM || err == EACCES) {
+				ui__warning_paranoid();
+				goto out_err;
+			}
 			/*
 			 * If it's cycles then fall back to hrtimer
 			 * based cpu-clock-tick sw counter, which
@@ -861,25 +862,41 @@ try_again:
 			 */
 			if (attr->type == PERF_TYPE_HARDWARE &&
 			    attr->config == PERF_COUNT_HW_CPU_CYCLES) {
-
 				if (verbose)
-					warning(" ... trying to fall back to cpu-clock-ticks\n");
+					ui__warning("Cycles event not supported,\n"
+						    "trying to fall back to cpu-clock-ticks\n");
 
 				attr->type = PERF_TYPE_SOFTWARE;
 				attr->config = PERF_COUNT_SW_CPU_CLOCK;
 				goto try_again;
 			}
-			printf("\n");
-			error("sys_perf_event_open() syscall returned with %d "
-			      "(%s).  /bin/dmesg may provide additional information.\n",
-			      err, strerror(err));
-			die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
-			exit(-1);
+
+			if (err == ENOENT) {
+				ui__warning("The %s event is not supported.\n",
+					    event_name(counter));
+				goto out_err;
+			}
+
+			ui__warning("The sys_perf_event_open() syscall "
+				    "returned with %d (%s).  /bin/dmesg "
+				    "may provide additional information.\n"
+				    "No CONFIG_PERF_EVENTS=y kernel support "
+				    "configured?\n", err, strerror(err));
+			goto out_err;
 		}
 	}
 
-	if (perf_evlist__mmap(evlist, mmap_pages, false) < 0)
-		die("failed to mmap with %d (%s)\n", errno, strerror(errno));
+	if (perf_evlist__mmap(evlist, mmap_pages, false) < 0) {
+		ui__warning("Failed to mmap with %d (%s)\n",
+			    errno, strerror(errno));
+		goto out_err;
+	}
+
+	return;
+
+out_err:
+	exit_browser(0);
+	exit(0);
 }
 
 static int __cmd_top(void)
diff --git a/tools/perf/feature-tests.mak b/tools/perf/config/feature-tests.mak
index b041ca67a2c..6170fd2531b 100644
--- a/tools/perf/feature-tests.mak
+++ b/tools/perf/config/feature-tests.mak
@@ -79,9 +79,15 @@ endef
 endif
 
 ifndef NO_LIBPYTHON
+define SOURCE_PYTHON_VERSION
+#include <Python.h>
+#if PY_VERSION_HEX >= 0x03000000
+	#error
+#endif
+int main(void){}
+endef
 define SOURCE_PYTHON_EMBED
 #include <Python.h>
-
 int main(void)
 {
 	Py_Initialize();
@@ -120,11 +126,3 @@ int main(void)
 	return 0;
 }
 endef
-
-# try-cc
-# Usage: option = $(call try-cc, source-to-build, cc-options)
-try-cc = $(shell sh -c						  \
-	'TMP="$(OUTPUT)$(TMPOUT).$$$$";				  \
-	 echo "$(1)" |						  \
-	 $(CC) -x c - $(2) -o "$$TMP" > /dev/null 2>&1 && echo y; \
-	 rm -f "$$TMP"')
diff --git a/tools/perf/config/utilities.mak b/tools/perf/config/utilities.mak
new file mode 100644
index 00000000000..8046182a19e
--- /dev/null
+++ b/tools/perf/config/utilities.mak
@@ -0,0 +1,188 @@
+# This allows us to work with the newline character:
+define newline
+
+
+endef
+newline := $(newline)
+
+# nl-escape
+#
+# Usage: escape = $(call nl-escape[,escape])
+#
+# This is used as the common way to specify
+# what should replace a newline when escaping
+# newlines; the default is a bizarre string.
+#
+nl-escape = $(or $(1),m822df3020w6a44id34bt574ctac44eb9f4n)
+
+# escape-nl
+#
+# Usage: escaped-text = $(call escape-nl,text[,escape])
+#
+# GNU make's $(shell ...) function converts to a
+# single space each newline character in the output
+# produced during the expansion; this may not be
+# desirable.
+#
+# The only solution is to change each newline into
+# something that won't be converted, so that the
+# information can be recovered later with
+# $(call unescape-nl...)
+#
+escape-nl = $(subst $(newline),$(call nl-escape,$(2)),$(1))
+
+# unescape-nl
+#
+# Usage: text = $(call unescape-nl,escaped-text[,escape])
+#
+# See escape-nl.
+#
+unescape-nl = $(subst $(call nl-escape,$(2)),$(newline),$(1))
+
+# shell-escape-nl
+#
+# Usage: $(shell some-command | $(call shell-escape-nl[,escape]))
+#
+# Use this to escape newlines from within a shell call;
+# the default escape is a bizarre string.
+#
+# NOTE: The escape is used directly as a string constant
+#       in an `awk' program that is delimited by shell
+#       single-quotes, so be wary of the characters
+#       that are chosen.
+#
+define shell-escape-nl
+awk 'NR==1 {t=$$0} NR>1 {t=t "$(nl-escape)" $$0} END {printf t}'
+endef
+
+# shell-unescape-nl
+#
+# Usage: $(shell some-command | $(call shell-unescape-nl[,escape]))
+#
+# Use this to unescape newlines from within a shell call;
+# the default escape is a bizarre string.
+#
+# NOTE: The escape is used directly as an extended regular
+#       expression constant in an `awk' program that is
+#       delimited by shell single-quotes, so be wary
+#       of the characters that are chosen.
+#
+# (The bash shell has a bug where `{gsub(...),...}' is
+#  misinterpreted as a brace expansion; this can be
+#  overcome by putting a space between `{' and `gsub').
+#
+define shell-unescape-nl
+awk 'NR==1 {t=$$0} NR>1 {t=t "\n" $$0} END { gsub(/$(nl-escape)/,"\n",t); printf t }'
+endef
+
+# escape-for-shell-sq
+#
+# Usage: embeddable-text = $(call escape-for-shell-sq,text)
+#
+# This function produces text that is suitable for
+# embedding in a shell string that is delimited by
+# single-quotes.
+#
+escape-for-shell-sq =  $(subst ','\'',$(1))
+
+# shell-sq
+#
+# Usage: single-quoted-and-escaped-text = $(call shell-sq,text)
+#
+shell-sq = '$(escape-for-shell-sq)'
+
+# shell-wordify
+#
+# Usage: wordified-text = $(call shell-wordify,text)
+#
+# For instance:
+#
+#  |define text
+#  |hello
+#  |world
+#  |endef
+#  |
+#  |target:
+#  |	echo $(call shell-wordify,$(text))
+#
+# At least GNU make gets confused by expanding a newline
+# within the context of a command line of a makefile rule
+# (this is in constrast to a `$(shell ...)' function call,
+# which can handle it just fine).
+#
+# This function avoids the problem by producing a string
+# that works as a shell word, regardless of whether or
+# not it contains a newline.
+#
+# If the text to be wordified contains a newline, then
+# an intrictate shell command substitution is constructed
+# to render the text as a single line; when the shell
+# processes the resulting escaped text, it transforms
+# it into the original unescaped text.
+#
+# If the text does not contain a newline, then this function
+# produces the same results as the `$(shell-sq)' function.
+#
+shell-wordify = $(if $(findstring $(newline),$(1)),$(_sw-esc-nl),$(shell-sq))
+define _sw-esc-nl
+"$$(echo $(call escape-nl,$(shell-sq),$(2)) | $(call shell-unescape-nl,$(2)))"
+endef
+
+# is-absolute
+#
+# Usage: bool-value = $(call is-absolute,path)
+#
+is-absolute = $(shell echo $(shell-sq) | grep ^/ -q && echo y)
+
+# lookup
+#
+# Usage: absolute-executable-path-or-empty = $(call lookup,path)
+#
+# (It's necessary to use `sh -c' because GNU make messes up by
+#  trying too hard and getting things wrong).
+#
+lookup = $(call unescape-nl,$(shell sh -c $(_l-sh)))
+_l-sh = $(call shell-sq,command -v $(shell-sq) | $(call shell-escape-nl,))
+
+# is-executable
+#
+# Usage: bool-value = $(call is-executable,path)
+#
+# (It's necessary to use `sh -c' because GNU make messes up by
+#  trying too hard and getting things wrong).
+#
+is-executable = $(call _is-executable-helper,$(shell-sq))
+_is-executable-helper = $(shell sh -c $(_is-executable-sh))
+_is-executable-sh = $(call shell-sq,test -f $(1) -a -x $(1) && echo y)
+
+# get-executable
+#
+# Usage: absolute-executable-path-or-empty = $(call get-executable,path)
+#
+# The goal is to get an absolute path for an executable;
+# the `command -v' is defined by POSIX, but it's not
+# necessarily very portable, so it's only used if
+# relative path resolution is requested, as determined
+# by the presence of a leading `/'.
+#
+get-executable = $(if $(1),$(if $(is-absolute),$(_ge-abspath),$(lookup)))
+_ge-abspath = $(if $(is-executable),$(1))
+
+# get-supplied-or-default-executable
+#
+# Usage: absolute-executable-path-or-empty = $(call get-executable-or-default,variable,default)
+#
+define get-executable-or-default
+$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2)))
+endef
+_ge_attempt = $(or $(get-executable),$(_gea_warn),$(call _gea_err,$(2)))
+_gea_warn = $(warning The path '$(1)' is not executable.)
+_gea_err  = $(if $(1),$(error Please set '$(1)' appropriately))
+
+# try-cc
+# Usage: option = $(call try-cc, source-to-build, cc-options)
+try-cc = $(shell sh -c						  \
+	'TMP="$(OUTPUT)$(TMPOUT).$$$$";				  \
+	 echo "$(1)" |						  \
+	 $(CC) -x c - $(2) -o "$$TMP" > /dev/null 2>&1 && echo y; \
+	 rm -f "$$TMP"')
diff --git a/tools/perf/util/cgroup.c b/tools/perf/util/cgroup.c
index 9fea7553522..96bee5c4600 100644
--- a/tools/perf/util/cgroup.c
+++ b/tools/perf/util/cgroup.c
@@ -13,7 +13,7 @@ cgroupfs_find_mountpoint(char *buf, size_t maxlen)
 {
 	FILE *fp;
 	char mountpoint[MAX_PATH+1], tokens[MAX_PATH+1], type[MAX_PATH+1];
-	char *token, *saved_ptr;
+	char *token, *saved_ptr = NULL;
 	int found = 0;
 
 	fp = fopen("/proc/mounts", "r");
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index d4536a9e0d8..155749d7435 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -57,6 +57,16 @@ void ui__warning(const char *format, ...)
 }
 #endif
 
+void ui__warning_paranoid(void)
+{
+	ui__warning("Permission error - are you root?\n"
+		    "Consider tweaking /proc/sys/kernel/perf_event_paranoid:\n"
+		    " -1 - Not paranoid at all\n"
+		    "  0 - Disallow raw tracepoint access for unpriv\n"
+		    "  1 - Disallow cpu events for unpriv\n"
+		    "  2 - Disallow kernel profiling for unpriv\n");
+}
+
 void trace_event(union perf_event *event)
 {
 	unsigned char *raw_event = (void *)event;
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index 93516cf4682..fd53db47e3d 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -36,5 +36,6 @@ int ui_helpline__show_help(const char *format, va_list ap);
 #endif
 
 void ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
+void ui__warning_paranoid(void);
 
 #endif	/* __PERF_DEBUG_H */
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 2b15c362ef5..1023f67633a 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -710,7 +710,7 @@ try_again:
 		 * in the whole kernel symbol list.
 		 */
 		if ((long long)al->addr < 0 &&
-		    cpumode == PERF_RECORD_MISC_KERNEL &&
+		    cpumode == PERF_RECORD_MISC_USER &&
 		    machine && mg != &machine->kmaps) {
 			mg = &machine->kmaps;
 			goto try_again;
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index d852cefa20d..23eb22b05d2 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -12,6 +12,7 @@
 #include "evlist.h"
 #include "evsel.h"
 #include "util.h"
+#include "debug.h"
 
 #include <sys/mman.h>
 
@@ -165,11 +166,11 @@ struct perf_evsel *perf_evlist__id2evsel(struct perf_evlist *evlist, u64 id)
 	return NULL;
 }
 
-union perf_event *perf_evlist__read_on_cpu(struct perf_evlist *evlist, int cpu)
+union perf_event *perf_evlist__mmap_read(struct perf_evlist *evlist, int idx)
 {
 	/* XXX Move this to perf.c, making it generally available */
 	unsigned int page_size = sysconf(_SC_PAGE_SIZE);
-	struct perf_mmap *md = &evlist->mmap[cpu];
+	struct perf_mmap *md = &evlist->mmap[idx];
 	unsigned int head = perf_mmap__read_head(md);
 	unsigned int old = md->prev;
 	unsigned char *data = md->base + page_size;
@@ -234,36 +235,126 @@ union perf_event *perf_evlist__read_on_cpu(struct perf_evlist *evlist, int cpu)
 
 void perf_evlist__munmap(struct perf_evlist *evlist)
 {
-	int cpu;
+	int i;
 
-	for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
-		if (evlist->mmap[cpu].base != NULL) {
-			munmap(evlist->mmap[cpu].base, evlist->mmap_len);
-			evlist->mmap[cpu].base = NULL;
+	for (i = 0; i < evlist->nr_mmaps; i++) {
+		if (evlist->mmap[i].base != NULL) {
+			munmap(evlist->mmap[i].base, evlist->mmap_len);
+			evlist->mmap[i].base = NULL;
 		}
 	}
+
+	free(evlist->mmap);
+	evlist->mmap = NULL;
 }
 
 int perf_evlist__alloc_mmap(struct perf_evlist *evlist)
 {
-	evlist->mmap = zalloc(evlist->cpus->nr * sizeof(struct perf_mmap));
+	evlist->nr_mmaps = evlist->cpus->nr;
+	if (evlist->cpus->map[0] == -1)
+		evlist->nr_mmaps = evlist->threads->nr;
+	evlist->mmap = zalloc(evlist->nr_mmaps * sizeof(struct perf_mmap));
 	return evlist->mmap != NULL ? 0 : -ENOMEM;
 }
 
-static int __perf_evlist__mmap(struct perf_evlist *evlist, int cpu, int prot,
-			       int mask, int fd)
+static int __perf_evlist__mmap(struct perf_evlist *evlist, struct perf_evsel *evsel,
+			       int idx, int prot, int mask, int fd)
 {
-	evlist->mmap[cpu].prev = 0;
-	evlist->mmap[cpu].mask = mask;
-	evlist->mmap[cpu].base = mmap(NULL, evlist->mmap_len, prot,
+	evlist->mmap[idx].prev = 0;
+	evlist->mmap[idx].mask = mask;
+	evlist->mmap[idx].base = mmap(NULL, evlist->mmap_len, prot,
 				      MAP_SHARED, fd, 0);
-	if (evlist->mmap[cpu].base == MAP_FAILED)
+	if (evlist->mmap[idx].base == MAP_FAILED) {
+		if (evlist->cpus->map[idx] == -1 && evsel->attr.inherit)
+			ui__warning("Inherit is not allowed on per-task "
+				    "events using mmap.\n");
 		return -1;
+	}
 
 	perf_evlist__add_pollfd(evlist, fd);
 	return 0;
 }
 
+static int perf_evlist__mmap_per_cpu(struct perf_evlist *evlist, int prot, int mask)
+{
+	struct perf_evsel *evsel;
+	int cpu, thread;
+
+	for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
+		int output = -1;
+
+		for (thread = 0; thread < evlist->threads->nr; thread++) {
+			list_for_each_entry(evsel, &evlist->entries, node) {
+				int fd = FD(evsel, cpu, thread);
+
+				if (output == -1) {
+					output = fd;
+					if (__perf_evlist__mmap(evlist, evsel, cpu,
+								prot, mask, output) < 0)
+						goto out_unmap;
+				} else {
+					if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT, output) != 0)
+						goto out_unmap;
+				}
+
+				if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
+				    perf_evlist__id_add_fd(evlist, evsel, cpu, thread, fd) < 0)
+					goto out_unmap;
+			}
+		}
+	}
+
+	return 0;
+
+out_unmap:
+	for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
+		if (evlist->mmap[cpu].base != NULL) {
+			munmap(evlist->mmap[cpu].base, evlist->mmap_len);
+			evlist->mmap[cpu].base = NULL;
+		}
+	}
+	return -1;
+}
+
+static int perf_evlist__mmap_per_thread(struct perf_evlist *evlist, int prot, int mask)
+{
+	struct perf_evsel *evsel;
+	int thread;
+
+	for (thread = 0; thread < evlist->threads->nr; thread++) {
+		int output = -1;
+
+		list_for_each_entry(evsel, &evlist->entries, node) {
+			int fd = FD(evsel, 0, thread);
+
+			if (output == -1) {
+				output = fd;
+				if (__perf_evlist__mmap(evlist, evsel, thread,
+							prot, mask, output) < 0)
+					goto out_unmap;
+			} else {
+				if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT, output) != 0)
+					goto out_unmap;
+			}
+
+			if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
+			    perf_evlist__id_add_fd(evlist, evsel, 0, thread, fd) < 0)
+				goto out_unmap;
+		}
+	}
+
+	return 0;
+
+out_unmap:
+	for (thread = 0; thread < evlist->threads->nr; thread++) {
+		if (evlist->mmap[thread].base != NULL) {
+			munmap(evlist->mmap[thread].base, evlist->mmap_len);
+			evlist->mmap[thread].base = NULL;
+		}
+	}
+	return -1;
+}
+
 /** perf_evlist__mmap - Create per cpu maps to receive events
  *
  * @evlist - list of events
@@ -282,11 +373,11 @@ static int __perf_evlist__mmap(struct perf_evlist *evlist, int cpu, int prot,
 int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite)
 {
 	unsigned int page_size = sysconf(_SC_PAGE_SIZE);
-	int mask = pages * page_size - 1, cpu;
-	struct perf_evsel *first_evsel, *evsel;
+	int mask = pages * page_size - 1;
+	struct perf_evsel *evsel;
 	const struct cpu_map *cpus = evlist->cpus;
 	const struct thread_map *threads = evlist->threads;
-	int thread, prot = PROT_READ | (overwrite ? 0 : PROT_WRITE);
+	int prot = PROT_READ | (overwrite ? 0 : PROT_WRITE);
 
 	if (evlist->mmap == NULL && perf_evlist__alloc_mmap(evlist) < 0)
 		return -ENOMEM;
@@ -296,42 +387,18 @@ int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite)
 
 	evlist->overwrite = overwrite;
 	evlist->mmap_len = (pages + 1) * page_size;
-	first_evsel = list_entry(evlist->entries.next, struct perf_evsel, node);
 
 	list_for_each_entry(evsel, &evlist->entries, node) {
 		if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
 		    evsel->sample_id == NULL &&
 		    perf_evsel__alloc_id(evsel, cpus->nr, threads->nr) < 0)
 			return -ENOMEM;
-
-		for (cpu = 0; cpu < cpus->nr; cpu++) {
-			for (thread = 0; thread < threads->nr; thread++) {
-				int fd = FD(evsel, cpu, thread);
-
-				if (evsel->idx || thread) {
-					if (ioctl(fd, PERF_EVENT_IOC_SET_OUTPUT,
-						  FD(first_evsel, cpu, 0)) != 0)
-						goto out_unmap;
-				} else if (__perf_evlist__mmap(evlist, cpu, prot, mask, fd) < 0)
-					goto out_unmap;
-
-				if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
-				    perf_evlist__id_add_fd(evlist, evsel, cpu, thread, fd) < 0)
-					goto out_unmap;
-			}
-		}
 	}
 
-	return 0;
+	if (evlist->cpus->map[0] == -1)
+		return perf_evlist__mmap_per_thread(evlist, prot, mask);
 
-out_unmap:
-	for (cpu = 0; cpu < cpus->nr; cpu++) {
-		if (evlist->mmap[cpu].base != NULL) {
-			munmap(evlist->mmap[cpu].base, evlist->mmap_len);
-			evlist->mmap[cpu].base = NULL;
-		}
-	}
-	return -1;
+	return perf_evlist__mmap_per_cpu(evlist, prot, mask);
 }
 
 int perf_evlist__create_maps(struct perf_evlist *evlist, pid_t target_pid,
@@ -342,7 +409,7 @@ int perf_evlist__create_maps(struct perf_evlist *evlist, pid_t target_pid,
 	if (evlist->threads == NULL)
 		return -1;
 
-	if (target_tid != -1)
+	if (cpu_list == NULL && target_tid != -1)
 		evlist->cpus = cpu_map__dummy_new();
 	else
 		evlist->cpus = cpu_map__new(cpu_list);
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 8b1cb7a4c5f..7109d7add14 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -17,6 +17,7 @@ struct perf_evlist {
 	struct hlist_head heads[PERF_EVLIST__HLIST_SIZE];
 	int		 nr_entries;
 	int		 nr_fds;
+	int		 nr_mmaps;
 	int		 mmap_len;
 	bool		 overwrite;
 	union perf_event event_copy;
@@ -46,7 +47,7 @@ void perf_evlist__add_pollfd(struct perf_evlist *evlist, int fd);
 
 struct perf_evsel *perf_evlist__id2evsel(struct perf_evlist *evlist, u64 id);
 
-union perf_event *perf_evlist__read_on_cpu(struct perf_evlist *self, int cpu);
+union perf_event *perf_evlist__mmap_read(struct perf_evlist *self, int idx);
 
 int perf_evlist__alloc_mmap(struct perf_evlist *evlist);
 int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite);
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 662596afd7f..d6fd59beb86 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -175,7 +175,7 @@ int __perf_evsel__read(struct perf_evsel *evsel,
 }
 
 static int __perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
-			      struct thread_map *threads, bool group, bool inherit)
+			      struct thread_map *threads, bool group)
 {
 	int cpu, thread;
 	unsigned long flags = 0;
@@ -192,19 +192,6 @@ static int __perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
 
 	for (cpu = 0; cpu < cpus->nr; cpu++) {
 		int group_fd = -1;
-		/*
-		 * Don't allow mmap() of inherited per-task counters. This
-		 * would create a performance issue due to all children writing
-		 * to the same buffer.
-		 *
-		 * FIXME:
-		 * Proper fix is not to pass 'inherit' to perf_evsel__open*,
-		 * but a 'flags' parameter, with 'group' folded there as well,
-		 * then introduce a PERF_O_{MMAP,GROUP,INHERIT} enum, and if
-		 * O_MMAP is set, emit a warning if cpu < 0 and O_INHERIT is
-		 * set. Lets go for the minimal fix first tho.
-		 */
-		evsel->attr.inherit = (cpus->map[cpu] >= 0) && inherit;
 
 		for (thread = 0; thread < threads->nr; thread++) {
 
@@ -253,7 +240,7 @@ static struct {
 };
 
 int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
-		     struct thread_map *threads, bool group, bool inherit)
+		     struct thread_map *threads, bool group)
 {
 	if (cpus == NULL) {
 		/* Work around old compiler warnings about strict aliasing */
@@ -263,19 +250,19 @@ int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
 	if (threads == NULL)
 		threads = &empty_thread_map.map;
 
-	return __perf_evsel__open(evsel, cpus, threads, group, inherit);
+	return __perf_evsel__open(evsel, cpus, threads, group);
 }
 
 int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
-			     struct cpu_map *cpus, bool group, bool inherit)
+			     struct cpu_map *cpus, bool group)
 {
-	return __perf_evsel__open(evsel, cpus, &empty_thread_map.map, group, inherit);
+	return __perf_evsel__open(evsel, cpus, &empty_thread_map.map, group);
 }
 
 int perf_evsel__open_per_thread(struct perf_evsel *evsel,
-				struct thread_map *threads, bool group, bool inherit)
+				struct thread_map *threads, bool group)
 {
-	return __perf_evsel__open(evsel, &empty_cpu_map.map, threads, group, inherit);
+	return __perf_evsel__open(evsel, &empty_cpu_map.map, threads, group);
 }
 
 static int perf_event__parse_id_sample(const union perf_event *event, u64 type,
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 6710ab53834..f79bb2c09a6 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -81,11 +81,11 @@ void perf_evsel__free_id(struct perf_evsel *evsel);
 void perf_evsel__close_fd(struct perf_evsel *evsel, int ncpus, int nthreads);
 
 int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
-			     struct cpu_map *cpus, bool group, bool inherit);
+			     struct cpu_map *cpus, bool group);
 int perf_evsel__open_per_thread(struct perf_evsel *evsel,
-				struct thread_map *threads, bool group, bool inherit);
+				struct thread_map *threads, bool group);
 int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
-		     struct thread_map *threads, bool group, bool inherit);
+		     struct thread_map *threads, bool group);
 
 #define perf_evsel__match(evsel, t, c)		\
 	(evsel->attr.type == PERF_TYPE_##t &&	\
diff --git a/tools/perf/util/include/asm/alternative-asm.h b/tools/perf/util/include/asm/alternative-asm.h
new file mode 100644
index 00000000000..6789d788d49
--- /dev/null
+++ b/tools/perf/util/include/asm/alternative-asm.h
@@ -0,0 +1,8 @@
+#ifndef _PERF_ASM_ALTERNATIVE_ASM_H
+#define _PERF_ASM_ALTERNATIVE_ASM_H
+
+/* Just disable it so we can build arch/x86/lib/memcpy_64.S for perf bench: */
+
+#define altinstruction_entry #
+
+#endif
diff --git a/tools/perf/util/include/linux/list.h b/tools/perf/util/include/linux/list.h
index 356c7e467b8..99358d61e9a 100644
--- a/tools/perf/util/include/linux/list.h
+++ b/tools/perf/util/include/linux/list.h
@@ -23,5 +23,5 @@ static inline void list_del_range(struct list_head *begin,
  * @head: the head for your list.
  */
 #define list_for_each_from(pos, head) \
-	for (; prefetch(pos->next), pos != (head); pos = pos->next)
+	for (; pos != (head); pos = pos->next)
 #endif
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 952b4ae3d95..41982c373fa 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -31,34 +31,36 @@ char debugfs_path[MAXPATHLEN];
 #define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
 
 static struct event_symbol event_symbols[] = {
-  { CHW(CPU_CYCLES),		"cpu-cycles",		"cycles"	},
-  { CHW(INSTRUCTIONS),		"instructions",		""		},
-  { CHW(CACHE_REFERENCES),	"cache-references",	""		},
-  { CHW(CACHE_MISSES),		"cache-misses",		""		},
-  { CHW(BRANCH_INSTRUCTIONS),	"branch-instructions",	"branches"	},
-  { CHW(BRANCH_MISSES),		"branch-misses",	""		},
-  { CHW(BUS_CYCLES),		"bus-cycles",		""		},
-
-  { CSW(CPU_CLOCK),		"cpu-clock",		""		},
-  { CSW(TASK_CLOCK),		"task-clock",		""		},
-  { CSW(PAGE_FAULTS),		"page-faults",		"faults"	},
-  { CSW(PAGE_FAULTS_MIN),	"minor-faults",		""		},
-  { CSW(PAGE_FAULTS_MAJ),	"major-faults",		""		},
-  { CSW(CONTEXT_SWITCHES),	"context-switches",	"cs"		},
-  { CSW(CPU_MIGRATIONS),	"cpu-migrations",	"migrations"	},
-  { CSW(ALIGNMENT_FAULTS),	"alignment-faults",	""		},
-  { CSW(EMULATION_FAULTS),	"emulation-faults",	""		},
+  { CHW(CPU_CYCLES),			"cpu-cycles",			"cycles"		},
+  { CHW(STALLED_CYCLES_FRONTEND),	"stalled-cycles-frontend",	"idle-cycles-frontend"	},
+  { CHW(STALLED_CYCLES_BACKEND),	"stalled-cycles-backend",	"idle-cycles-backend"	},
+  { CHW(INSTRUCTIONS),			"instructions",			""			},
+  { CHW(CACHE_REFERENCES),		"cache-references",		""			},
+  { CHW(CACHE_MISSES),			"cache-misses",			""			},
+  { CHW(BRANCH_INSTRUCTIONS),		"branch-instructions",		"branches"		},
+  { CHW(BRANCH_MISSES),			"branch-misses",		""			},
+  { CHW(BUS_CYCLES),			"bus-cycles",			""			},
+
+  { CSW(CPU_CLOCK),			"cpu-clock",			""			},
+  { CSW(TASK_CLOCK),			"task-clock",			""			},
+  { CSW(PAGE_FAULTS),			"page-faults",			"faults"		},
+  { CSW(PAGE_FAULTS_MIN),		"minor-faults",			""			},
+  { CSW(PAGE_FAULTS_MAJ),		"major-faults",			""			},
+  { CSW(CONTEXT_SWITCHES),		"context-switches",		"cs"			},
+  { CSW(CPU_MIGRATIONS),		"cpu-migrations",		"migrations"		},
+  { CSW(ALIGNMENT_FAULTS),		"alignment-faults",		""			},
+  { CSW(EMULATION_FAULTS),		"emulation-faults",		""			},
 };
 
 #define __PERF_EVENT_FIELD(config, name) \
 	((config & PERF_EVENT_##name##_MASK) >> PERF_EVENT_##name##_SHIFT)
 
-#define PERF_EVENT_RAW(config)	__PERF_EVENT_FIELD(config, RAW)
+#define PERF_EVENT_RAW(config)		__PERF_EVENT_FIELD(config, RAW)
 #define PERF_EVENT_CONFIG(config)	__PERF_EVENT_FIELD(config, CONFIG)
-#define PERF_EVENT_TYPE(config)	__PERF_EVENT_FIELD(config, TYPE)
+#define PERF_EVENT_TYPE(config)		__PERF_EVENT_FIELD(config, TYPE)
 #define PERF_EVENT_ID(config)		__PERF_EVENT_FIELD(config, EVENT)
 
-static const char *hw_event_names[] = {
+static const char *hw_event_names[PERF_COUNT_HW_MAX] = {
 	"cycles",
 	"instructions",
 	"cache-references",
@@ -66,11 +68,13 @@ static const char *hw_event_names[] = {
 	"branches",
 	"branch-misses",
 	"bus-cycles",
+	"stalled-cycles-frontend",
+	"stalled-cycles-backend",
 };
 
-static const char *sw_event_names[] = {
-	"cpu-clock-msecs",
-	"task-clock-msecs",
+static const char *sw_event_names[PERF_COUNT_SW_MAX] = {
+	"cpu-clock",
+	"task-clock",
 	"page-faults",
 	"context-switches",
 	"CPU-migrations",
@@ -307,7 +311,7 @@ const char *__event_name(int type, u64 config)
 
 	switch (type) {
 	case PERF_TYPE_HARDWARE:
-		if (config < PERF_COUNT_HW_MAX)
+		if (config < PERF_COUNT_HW_MAX && hw_event_names[config])
 			return hw_event_names[config];
 		return "unknown-hardware";
 
@@ -333,7 +337,7 @@ const char *__event_name(int type, u64 config)
 	}
 
 	case PERF_TYPE_SOFTWARE:
-		if (config < PERF_COUNT_SW_MAX)
+		if (config < PERF_COUNT_SW_MAX && sw_event_names[config])
 			return sw_event_names[config];
 		return "unknown-software";
 
@@ -648,13 +652,15 @@ static int check_events(const char *str, unsigned int i)
 	int n;
 
 	n = strlen(event_symbols[i].symbol);
-	if (!strncmp(str, event_symbols[i].symbol, n))
+	if (!strncasecmp(str, event_symbols[i].symbol, n))
 		return n;
 
 	n = strlen(event_symbols[i].alias);
-	if (n)
-		if (!strncmp(str, event_symbols[i].alias, n))
+	if (n) {
+		if (!strncasecmp(str, event_symbols[i].alias, n))
 			return n;
+	}
+
 	return 0;
 }
 
@@ -718,15 +724,22 @@ parse_numeric_event(const char **strp, struct perf_event_attr *attr)
 	return EVT_FAILED;
 }
 
-static enum event_result
+static int
 parse_event_modifier(const char **strp, struct perf_event_attr *attr)
 {
 	const char *str = *strp;
 	int exclude = 0;
 	int eu = 0, ek = 0, eh = 0, precise = 0;
 
-	if (*str++ != ':')
+	if (!*str)
+		return 0;
+
+	if (*str == ',')
 		return 0;
+
+	if (*str++ != ':')
+		return -1;
+
 	while (*str) {
 		if (*str == 'u') {
 			if (!exclude)
@@ -747,14 +760,16 @@ parse_event_modifier(const char **strp, struct perf_event_attr *attr)
 
 		++str;
 	}
-	if (str >= *strp + 2) {
-		*strp = str;
-		attr->exclude_user   = eu;
-		attr->exclude_kernel = ek;
-		attr->exclude_hv     = eh;
-		attr->precise_ip     = precise;
-		return 1;
-	}
+	if (str < *strp + 2)
+		return -1;
+
+	*strp = str;
+
+	attr->exclude_user   = eu;
+	attr->exclude_kernel = ek;
+	attr->exclude_hv     = eh;
+	attr->precise_ip     = precise;
+
 	return 0;
 }
 
@@ -797,7 +812,12 @@ parse_event_symbols(const struct option *opt, const char **str,
 	return EVT_FAILED;
 
 modifier:
-	parse_event_modifier(str, attr);
+	if (parse_event_modifier(str, attr) < 0) {
+		fprintf(stderr, "invalid event modifier: '%s'\n", *str);
+		fprintf(stderr, "Run 'perf list' for a list of valid events and modifiers\n");
+
+		return EVT_FAILED;
+	}
 
 	return ret;
 }
@@ -912,7 +932,7 @@ void print_tracepoint_events(const char *subsys_glob, const char *event_glob)
 
 			snprintf(evt_path, MAXPATHLEN, "%s:%s",
 				 sys_dirent.d_name, evt_dirent.d_name);
-			printf("  %-42s [%s]\n", evt_path,
+			printf("  %-50s [%s]\n", evt_path,
 				event_type_descriptors[PERF_TYPE_TRACEPOINT]);
 		}
 		closedir(evt_dir);
@@ -977,7 +997,7 @@ void print_events_type(u8 type)
 		else
 			snprintf(name, sizeof(name), "%s", syms->symbol);
 
-		printf("  %-42s [%s]\n", name,
+		printf("  %-50s [%s]\n", name,
 			event_type_descriptors[type]);
 	}
 }
@@ -995,11 +1015,10 @@ int print_hwcache_events(const char *event_glob)
 			for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
 				char *name = event_cache_name(type, op, i);
 
-				if (event_glob != NULL && 
-				    !strglobmatch(name, event_glob))
+				if (event_glob != NULL && !strglobmatch(name, event_glob))
 					continue;
 
-				printf("  %-42s [%s]\n", name,
+				printf("  %-50s [%s]\n", name,
 					event_type_descriptors[PERF_TYPE_HW_CACHE]);
 				++printed;
 			}
@@ -1009,14 +1028,16 @@ int print_hwcache_events(const char *event_glob)
 	return printed;
 }
 
+#define MAX_NAME_LEN 100
+
 /*
  * Print the help text for the event symbols:
  */
 void print_events(const char *event_glob)
 {
-	struct event_symbol *syms = event_symbols;
 	unsigned int i, type, prev_type = -1, printed = 0, ntypes_printed = 0;
-	char name[40];
+	struct event_symbol *syms = event_symbols;
+	char name[MAX_NAME_LEN];
 
 	printf("\n");
 	printf("List of pre-defined events (to be used in -e):\n");
@@ -1036,10 +1057,10 @@ void print_events(const char *event_glob)
 			continue;
 
 		if (strlen(syms->alias))
-			sprintf(name, "%s OR %s", syms->symbol, syms->alias);
+			snprintf(name, MAX_NAME_LEN, "%s OR %s", syms->symbol, syms->alias);
 		else
-			strcpy(name, syms->symbol);
-		printf("  %-42s [%s]\n", name,
+			strncpy(name, syms->symbol, MAX_NAME_LEN);
+		printf("  %-50s [%s]\n", name,
 			event_type_descriptors[type]);
 
 		prev_type = type;
@@ -1056,12 +1077,12 @@ void print_events(const char *event_glob)
 		return;
 
 	printf("\n");
-	printf("  %-42s [%s]\n",
+	printf("  %-50s [%s]\n",
 		"rNNN (see 'perf list --help' on how to encode it)",
 	       event_type_descriptors[PERF_TYPE_RAW]);
 	printf("\n");
 
-	printf("  %-42s [%s]\n",
+	printf("  %-50s [%s]\n",
 			"mem:<addr>[:access]",
 			event_type_descriptors[PERF_TYPE_BREAKPOINT]);
 	printf("\n");
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 5ddee66020a..f0223166e76 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -234,7 +234,6 @@ static int try_to_find_probe_trace_events(struct perf_probe_event *pev,
 
 	/* Searching trace events corresponding to probe event */
 	ntevs = find_probe_trace_events(fd, pev, tevs, max_tevs);
-	close(fd);
 
 	if (ntevs > 0) {	/* Succeeded to find trace events */
 		pr_debug("find %d probe_trace_events.\n", ntevs);
@@ -388,7 +387,6 @@ int show_line_range(struct line_range *lr, const char *module)
 	}
 
 	ret = find_line_range(fd, lr);
-	close(fd);
 	if (ret == 0) {
 		pr_warning("Specified source line is not found.\n");
 		return -ENOENT;
@@ -512,19 +510,18 @@ int show_available_vars(struct perf_probe_event *pevs, int npevs,
 	if (ret < 0)
 		return ret;
 
-	fd = open_vmlinux(module);
-	if (fd < 0) {
-		pr_warning("Failed to open debug information file.\n");
-		return fd;
-	}
-
 	setup_pager();
 
-	for (i = 0; i < npevs && ret >= 0; i++)
+	for (i = 0; i < npevs && ret >= 0; i++) {
+		fd = open_vmlinux(module);
+		if (fd < 0) {
+			pr_warning("Failed to open debug information file.\n");
+			ret = fd;
+			break;
+		}
 		ret = show_available_vars_at(fd, &pevs[i], max_vls, _filter,
 					     externs);
-
-	close(fd);
+	}
 	return ret;
 }
 
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 194f9e2a328..3b9d0b800d5 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -273,6 +273,25 @@ static const char *cu_get_comp_dir(Dwarf_Die *cu_die)
 	return dwarf_formstring(&attr);
 }
 
+/* Get a line number and file name for given address */
+static int cu_find_lineinfo(Dwarf_Die *cudie, unsigned long addr,
+			    const char **fname, int *lineno)
+{
+	Dwarf_Line *line;
+	Dwarf_Addr laddr;
+
+	line = dwarf_getsrc_die(cudie, (Dwarf_Addr)addr);
+	if (line && dwarf_lineaddr(line, &laddr) == 0 &&
+	    addr == (unsigned long)laddr && dwarf_lineno(line, lineno) == 0) {
+		*fname = dwarf_linesrc(line, NULL, NULL);
+		if (!*fname)
+			/* line number is useless without filename */
+			*lineno = 0;
+	}
+
+	return *lineno ?: -ENOENT;
+}
+
 /* Compare diename and tname */
 static bool die_compare_name(Dwarf_Die *dw_die, const char *tname)
 {
@@ -497,7 +516,20 @@ static int __die_find_inline_cb(Dwarf_Die *die_mem, void *data)
 static Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr,
 				      Dwarf_Die *die_mem)
 {
-	return die_find_child(sp_die, __die_find_inline_cb, &addr, die_mem);
+	Dwarf_Die tmp_die;
+
+	sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr, &tmp_die);
+	if (!sp_die)
+		return NULL;
+
+	/* Inlined function could be recursive. Trace it until fail */
+	while (sp_die) {
+		memcpy(die_mem, sp_die, sizeof(Dwarf_Die));
+		sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr,
+					&tmp_die);
+	}
+
+	return die_mem;
 }
 
 /* Walker on lines (Note: line number will not be sorted) */
@@ -1395,6 +1427,10 @@ static int probe_point_search_cb(Dwarf_Die *sp_die, void *data)
 	    !die_compare_name(sp_die, pp->function))
 		return DWARF_CB_OK;
 
+	/* Check declared file */
+	if (pp->file && strtailcmp(pp->file, dwarf_decl_file(sp_die)))
+		return DWARF_CB_OK;
+
 	pf->fname = dwarf_decl_file(sp_die);
 	if (pp->line) { /* Function relative line */
 		dwarf_decl_line(sp_die, &pf->lno);
@@ -1435,6 +1471,38 @@ static int find_probe_point_by_func(struct probe_finder *pf)
 	return _param.retval;
 }
 
+struct pubname_callback_param {
+	char *function;
+	char *file;
+	Dwarf_Die *cu_die;
+	Dwarf_Die *sp_die;
+	int found;
+};
+
+static int pubname_search_cb(Dwarf *dbg, Dwarf_Global *gl, void *data)
+{
+	struct pubname_callback_param *param = data;
+
+	if (dwarf_offdie(dbg, gl->die_offset, param->sp_die)) {
+		if (dwarf_tag(param->sp_die) != DW_TAG_subprogram)
+			return DWARF_CB_OK;
+
+		if (die_compare_name(param->sp_die, param->function)) {
+			if (!dwarf_offdie(dbg, gl->cu_offset, param->cu_die))
+				return DWARF_CB_OK;
+
+			if (param->file &&
+			    strtailcmp(param->file, dwarf_decl_file(param->sp_die)))
+				return DWARF_CB_OK;
+
+			param->found = 1;
+			return DWARF_CB_ABORT;
+		}
+	}
+
+	return DWARF_CB_OK;
+}
+
 /* Find probe points from debuginfo */
 static int find_probes(int fd, struct probe_finder *pf)
 {
@@ -1451,6 +1519,7 @@ static int find_probes(int fd, struct probe_finder *pf)
 	if (!dbg) {
 		pr_warning("No debug information found in the vmlinux - "
 			"please rebuild with CONFIG_DEBUG_INFO=y.\n");
+		close(fd);	/* Without dwfl_end(), fd isn't closed. */
 		return -EBADF;
 	}
 
@@ -1461,6 +1530,28 @@ static int find_probes(int fd, struct probe_finder *pf)
 
 	off = 0;
 	line_list__init(&pf->lcache);
+
+	/* Fastpath: lookup by function name from .debug_pubnames section */
+	if (pp->function) {
+		struct pubname_callback_param pubname_param = {
+			.function = pp->function,
+			.file	  = pp->file,
+			.cu_die	  = &pf->cu_die,
+			.sp_die	  = &pf->sp_die,
+			.found	  = 0,
+		};
+		struct dwarf_callback_param probe_param = {
+			.data = pf,
+		};
+
+		dwarf_getpubnames(dbg, pubname_search_cb, &pubname_param, 0);
+		if (pubname_param.found) {
+			ret = probe_point_search_cb(&pf->sp_die, &probe_param);
+			if (ret)
+				goto found;
+		}
+	}
+
 	/* Loop on CUs (Compilation Unit) */
 	while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL)) {
 		/* Get the DIE(Debugging Information Entry) of this CU */
@@ -1488,6 +1579,8 @@ static int find_probes(int fd, struct probe_finder *pf)
 		}
 		off = noff;
 	}
+
+found:
 	line_list__free(&pf->lcache);
 	if (dwfl)
 		dwfl_end(dwfl);
@@ -1686,11 +1779,9 @@ int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt)
 	Dwarf_Die cudie, spdie, indie;
 	Dwarf *dbg = NULL;
 	Dwfl *dwfl = NULL;
-	Dwarf_Line *line;
-	Dwarf_Addr laddr, eaddr, bias = 0;
-	const char *tmp;
-	int lineno, ret = 0;
-	bool found = false;
+	Dwarf_Addr _addr, baseaddr, bias = 0;
+	const char *fname = NULL, *func = NULL, *tmp;
+	int baseline = 0, lineno = 0, ret = 0;
 
 	/* Open the live linux kernel */
 	dbg = dwfl_init_live_kernel_dwarf(addr, &dwfl, &bias);
@@ -1711,68 +1802,79 @@ int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt)
 		goto end;
 	}
 
-	/* Find a corresponding line */
-	line = dwarf_getsrc_die(&cudie, (Dwarf_Addr)addr);
-	if (line) {
-		if (dwarf_lineaddr(line, &laddr) == 0 &&
-		    (Dwarf_Addr)addr == laddr &&
-		    dwarf_lineno(line, &lineno) == 0) {
-			tmp = dwarf_linesrc(line, NULL, NULL);
-			if (tmp) {
-				ppt->line = lineno;
-				ppt->file = strdup(tmp);
-				if (ppt->file == NULL) {
-					ret = -ENOMEM;
-					goto end;
-				}
-				found = true;
-			}
-		}
-	}
+	/* Find a corresponding line (filename and lineno) */
+	cu_find_lineinfo(&cudie, addr, &fname, &lineno);
+	/* Don't care whether it failed or not */
 
-	/* Find a corresponding function */
+	/* Find a corresponding function (name, baseline and baseaddr) */
 	if (die_find_real_subprogram(&cudie, (Dwarf_Addr)addr, &spdie)) {
+		/* Get function entry information */
 		tmp = dwarf_diename(&spdie);
-		if (!tmp || dwarf_entrypc(&spdie, &eaddr) != 0)
-			goto end;
-
-		if (ppt->line) {
-			if (die_find_inlinefunc(&spdie, (Dwarf_Addr)addr,
-						&indie)) {
-				/* addr in an inline function */
+		if (!tmp ||
+		    dwarf_entrypc(&spdie, &baseaddr) != 0 ||
+		    dwarf_decl_line(&spdie, &baseline) != 0)
+			goto post;
+		func = tmp;
+
+		if (addr == (unsigned long)baseaddr)
+			/* Function entry - Relative line number is 0 */
+			lineno = baseline;
+		else if (die_find_inlinefunc(&spdie, (Dwarf_Addr)addr,
+					     &indie)) {
+			if (dwarf_entrypc(&indie, &_addr) == 0 &&
+			    _addr == addr)
+				/*
+				 * addr is at an inline function entry.
+				 * In this case, lineno should be the call-site
+				 * line number.
+				 */
+				lineno = die_get_call_lineno(&indie);
+			else {
+				/*
+				 * addr is in an inline function body.
+				 * Since lineno points one of the lines
+				 * of the inline function, baseline should
+				 * be the entry line of the inline function.
+				 */
 				tmp = dwarf_diename(&indie);
-				if (!tmp)
-					goto end;
-				ret = dwarf_decl_line(&indie, &lineno);
-			} else {
-				if (eaddr == addr) {	/* Function entry */
-					lineno = ppt->line;
-					ret = 0;
-				} else
-					ret = dwarf_decl_line(&spdie, &lineno);
-			}
-			if (ret == 0) {
-				/* Make a relative line number */
-				ppt->line -= lineno;
-				goto found;
+				if (tmp &&
+				    dwarf_decl_line(&spdie, &baseline) == 0)
+					func = tmp;
 			}
 		}
-		/* We don't have a line number, let's use offset */
-		ppt->offset = addr - (unsigned long)eaddr;
-found:
-		ppt->function = strdup(tmp);
+	}
+
+post:
+	/* Make a relative line number or an offset */
+	if (lineno)
+		ppt->line = lineno - baseline;
+	else if (func)
+		ppt->offset = addr - (unsigned long)baseaddr;
+
+	/* Duplicate strings */
+	if (func) {
+		ppt->function = strdup(func);
 		if (ppt->function == NULL) {
 			ret = -ENOMEM;
 			goto end;
 		}
-		found = true;
 	}
-
+	if (fname) {
+		ppt->file = strdup(fname);
+		if (ppt->file == NULL) {
+			if (ppt->function) {
+				free(ppt->function);
+				ppt->function = NULL;
+			}
+			ret = -ENOMEM;
+			goto end;
+		}
+	}
 end:
 	if (dwfl)
 		dwfl_end(dwfl);
-	if (ret >= 0)
-		ret = found ? 1 : 0;
+	if (ret == 0 && (fname || func))
+		ret = 1;	/* Found a point */
 	return ret;
 }
 
@@ -1840,6 +1942,10 @@ static int line_range_search_cb(Dwarf_Die *sp_die, void *data)
 	struct line_finder *lf = param->data;
 	struct line_range *lr = lf->lr;
 
+	/* Check declared file */
+	if (lr->file && strtailcmp(lr->file, dwarf_decl_file(sp_die)))
+		return DWARF_CB_OK;
+
 	if (dwarf_tag(sp_die) == DW_TAG_subprogram &&
 	    die_compare_name(sp_die, lr->function)) {
 		lf->fname = dwarf_decl_file(sp_die);
@@ -1892,9 +1998,26 @@ int find_line_range(int fd, struct line_range *lr)
 	if (!dbg) {
 		pr_warning("No debug information found in the vmlinux - "
 			"please rebuild with CONFIG_DEBUG_INFO=y.\n");
+		close(fd);	/* Without dwfl_end(), fd isn't closed. */
 		return -EBADF;
 	}
 
+	/* Fastpath: lookup by function name from .debug_pubnames section */
+	if (lr->function) {
+		struct pubname_callback_param pubname_param = {
+			.function = lr->function, .file = lr->file,
+			.cu_die = &lf.cu_die, .sp_die = &lf.sp_die, .found = 0};
+		struct dwarf_callback_param line_range_param = {
+			.data = (void *)&lf, .retval = 0};
+
+		dwarf_getpubnames(dbg, pubname_search_cb, &pubname_param, 0);
+		if (pubname_param.found) {
+			line_range_search_cb(&lf.sp_die, &line_range_param);
+			if (lf.found)
+				goto found;
+		}
+	}
+
 	/* Loop on CUs (Compilation Unit) */
 	while (!lf.found && ret >= 0) {
 		if (dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL) != 0)
@@ -1923,6 +2046,7 @@ int find_line_range(int fd, struct line_range *lr)
 		off = noff;
 	}
 
+found:
 	/* Store comp_dir */
 	if (lf.found) {
 		comp_dir = cu_get_comp_dir(&lf.cu_die);
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
index beaefc3c122..605730a366d 100644
--- a/tools/perf/util/probe-finder.h
+++ b/tools/perf/util/probe-finder.h
@@ -49,6 +49,7 @@ struct probe_finder {
 	Dwarf_Addr		addr;		/* Address */
 	const char		*fname;		/* Real file name */
 	Dwarf_Die		cu_die;		/* Current CU */
+	Dwarf_Die		sp_die;
 	struct list_head	lcache;		/* Line cache for lazy match */
 
 	/* For variable searching */
@@ -83,6 +84,7 @@ struct line_finder {
 	int			lno_s;		/* Start line number */
 	int			lno_e;		/* End line number */
 	Dwarf_Die		cu_die;		/* Current CU */
+	Dwarf_Die		sp_die;
 	int			found;
 };
 
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index a9f2d7e1204..b5c7d818001 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -498,11 +498,11 @@ static PyObject *pyrf_evsel__open(struct pyrf_evsel *pevsel,
 	struct cpu_map *cpus = NULL;
 	struct thread_map *threads = NULL;
 	PyObject *pcpus = NULL, *pthreads = NULL;
-	int group = 0, overwrite = 0;
-	static char *kwlist[] = {"cpus", "threads", "group", "overwrite", NULL, NULL};
+	int group = 0, inherit = 0;
+	static char *kwlist[] = {"cpus", "threads", "group", "inherit", NULL, NULL};
 
 	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|OOii", kwlist,
-					 &pcpus, &pthreads, &group, &overwrite))
+					 &pcpus, &pthreads, &group, &inherit))
 		return NULL;
 
 	if (pthreads != NULL)
@@ -511,7 +511,8 @@ static PyObject *pyrf_evsel__open(struct pyrf_evsel *pevsel,
 	if (pcpus != NULL)
 		cpus = ((struct pyrf_cpu_map *)pcpus)->cpus;
 
-	if (perf_evsel__open(evsel, cpus, threads, group, overwrite) < 0) {
+	evsel->attr.inherit = inherit;
+	if (perf_evsel__open(evsel, cpus, threads, group) < 0) {
 		PyErr_SetFromErrno(PyExc_OSError);
 		return NULL;
 	}
@@ -679,7 +680,7 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist,
 					 &cpu, &sample_id_all))
 		return NULL;
 
-	event = perf_evlist__read_on_cpu(evlist, cpu);
+	event = perf_evlist__mmap_read(evlist, cpu);
 	if (event != NULL) {
 		struct perf_evsel *first;
 		PyObject *pyevent = pyrf_event__new(event);
@@ -809,6 +810,9 @@ static struct {
 	{ "COUNT_HW_CACHE_RESULT_ACCESS", PERF_COUNT_HW_CACHE_RESULT_ACCESS },
 	{ "COUNT_HW_CACHE_RESULT_MISS",   PERF_COUNT_HW_CACHE_RESULT_MISS },
 
+	{ "COUNT_HW_STALLED_CYCLES_FRONTEND",	  PERF_COUNT_HW_STALLED_CYCLES_FRONTEND },
+	{ "COUNT_HW_STALLED_CYCLES_BACKEND",	  PERF_COUNT_HW_STALLED_CYCLES_BACKEND },
+
 	{ "COUNT_SW_CPU_CLOCK",	       PERF_COUNT_SW_CPU_CLOCK },
 	{ "COUNT_SW_TASK_CLOCK",       PERF_COUNT_SW_TASK_CLOCK },
 	{ "COUNT_SW_PAGE_FAULTS",      PERF_COUNT_SW_PAGE_FAULTS },
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index caa224522fe..fff66741f18 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -1156,6 +1156,18 @@ size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp)
 	return ret;
 }
 
+struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
+					      unsigned int type)
+{
+	struct perf_evsel *pos;
+
+	list_for_each_entry(pos, &session->evlist->entries, node) {
+		if (pos->attr.type == type)
+			return pos;
+	}
+	return NULL;
+}
+
 void perf_session__print_symbols(union perf_event *event,
 				struct perf_sample *sample,
 				struct perf_session *session)
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 1ac481fc110..8daaa2d1539 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -162,6 +162,9 @@ static inline int perf_session__parse_sample(struct perf_session *session,
 					session->sample_id_all, sample);
 }
 
+struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
+					    unsigned int type);
+
 void perf_session__print_symbols(union perf_event *event,
 				 struct perf_sample *sample,
 				 struct perf_session *session);
diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py
index e24ffadb20b..bbc982f5dd8 100644
--- a/tools/perf/util/setup.py
+++ b/tools/perf/util/setup.py
@@ -1,13 +1,18 @@
 #!/usr/bin/python2
 
 from distutils.core import setup, Extension
+from os import getenv
+
+cflags = ['-fno-strict-aliasing', '-Wno-write-strings']
+cflags += getenv('CFLAGS', '').split()
 
 perf = Extension('perf',
 		  sources = ['util/python.c', 'util/ctype.c', 'util/evlist.c',
 			     'util/evsel.c', 'util/cpumap.c', 'util/thread_map.c',
 			     'util/util.c', 'util/xyarray.c', 'util/cgroup.c'],
 		  include_dirs = ['util/include'],
-		  extra_compile_args = ['-fno-strict-aliasing', '-Wno-write-strings'])
+		  extra_compile_args = cflags,
+                 )
 
 setup(name='perf',
       version='0.1',
diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
index 8fc0bd3a3a4..b9a985dadd0 100644
--- a/tools/perf/util/string.c
+++ b/tools/perf/util/string.c
@@ -85,7 +85,7 @@ out:
 
 /*
  * Helper function for splitting a string into an argv-like array.
- * originaly copied from lib/argv_split.c
+ * originally copied from lib/argv_split.c
  */
 static const char *skip_sep(const char *cp)
 {
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 17df793c892..516876dfbe5 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -31,13 +31,13 @@
 #define NT_GNU_BUILD_ID 3
 #endif
 
-static bool dso__build_id_equal(const struct dso *self, u8 *build_id);
+static bool dso__build_id_equal(const struct dso *dso, u8 *build_id);
 static int elf_read_build_id(Elf *elf, void *bf, size_t size);
 static void dsos__add(struct list_head *head, struct dso *dso);
 static struct map *map__new2(u64 start, struct dso *dso, enum map_type type);
-static int dso__load_kernel_sym(struct dso *self, struct map *map,
+static int dso__load_kernel_sym(struct dso *dso, struct map *map,
 				symbol_filter_t filter);
-static int dso__load_guest_kernel_sym(struct dso *self, struct map *map,
+static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map,
 			symbol_filter_t filter);
 static int vmlinux_path__nr_entries;
 static char **vmlinux_path;
@@ -49,27 +49,27 @@ struct symbol_conf symbol_conf = {
 	.symfs            = "",
 };
 
-int dso__name_len(const struct dso *self)
+int dso__name_len(const struct dso *dso)
 {
 	if (verbose)
-		return self->long_name_len;
+		return dso->long_name_len;
 
-	return self->short_name_len;
+	return dso->short_name_len;
 }
 
-bool dso__loaded(const struct dso *self, enum map_type type)
+bool dso__loaded(const struct dso *dso, enum map_type type)
 {
-	return self->loaded & (1 << type);
+	return dso->loaded & (1 << type);
 }
 
-bool dso__sorted_by_name(const struct dso *self, enum map_type type)
+bool dso__sorted_by_name(const struct dso *dso, enum map_type type)
 {
-	return self->sorted_by_name & (1 << type);
+	return dso->sorted_by_name & (1 << type);
 }
 
-static void dso__set_sorted_by_name(struct dso *self, enum map_type type)
+static void dso__set_sorted_by_name(struct dso *dso, enum map_type type)
 {
-	self->sorted_by_name |= (1 << type);
+	dso->sorted_by_name |= (1 << type);
 }
 
 bool symbol_type__is_a(char symbol_type, enum map_type map_type)
@@ -84,9 +84,9 @@ bool symbol_type__is_a(char symbol_type, enum map_type map_type)
 	}
 }
 
-static void symbols__fixup_end(struct rb_root *self)
+static void symbols__fixup_end(struct rb_root *symbols)
 {
-	struct rb_node *nd, *prevnd = rb_first(self);
+	struct rb_node *nd, *prevnd = rb_first(symbols);
 	struct symbol *curr, *prev;
 
 	if (prevnd == NULL)
@@ -107,10 +107,10 @@ static void symbols__fixup_end(struct rb_root *self)
 		curr->end = roundup(curr->start, 4096);
 }
 
-static void __map_groups__fixup_end(struct map_groups *self, enum map_type type)
+static void __map_groups__fixup_end(struct map_groups *mg, enum map_type type)
 {
 	struct map *prev, *curr;
-	struct rb_node *nd, *prevnd = rb_first(&self->maps[type]);
+	struct rb_node *nd, *prevnd = rb_first(&mg->maps[type]);
 
 	if (prevnd == NULL)
 		return;
@@ -130,128 +130,128 @@ static void __map_groups__fixup_end(struct map_groups *self, enum map_type type)
 	curr->end = ~0ULL;
 }
 
-static void map_groups__fixup_end(struct map_groups *self)
+static void map_groups__fixup_end(struct map_groups *mg)
 {
 	int i;
 	for (i = 0; i < MAP__NR_TYPES; ++i)
-		__map_groups__fixup_end(self, i);
+		__map_groups__fixup_end(mg, i);
 }
 
 static struct symbol *symbol__new(u64 start, u64 len, u8 binding,
 				  const char *name)
 {
 	size_t namelen = strlen(name) + 1;
-	struct symbol *self = calloc(1, (symbol_conf.priv_size +
-					 sizeof(*self) + namelen));
-	if (self == NULL)
+	struct symbol *sym = calloc(1, (symbol_conf.priv_size +
+					sizeof(*sym) + namelen));
+	if (sym == NULL)
 		return NULL;
 
 	if (symbol_conf.priv_size)
-		self = ((void *)self) + symbol_conf.priv_size;
-
-	self->start   = start;
-	self->end     = len ? start + len - 1 : start;
-	self->binding = binding;
-	self->namelen = namelen - 1;
+		sym = ((void *)sym) + symbol_conf.priv_size;
 
-	pr_debug4("%s: %s %#" PRIx64 "-%#" PRIx64 "\n", __func__, name, start, self->end);
+	sym->start   = start;
+	sym->end     = len ? start + len - 1 : start;
+	sym->binding = binding;
+	sym->namelen = namelen - 1;
 
-	memcpy(self->name, name, namelen);
+	pr_debug4("%s: %s %#" PRIx64 "-%#" PRIx64 "\n",
+		  __func__, name, start, sym->end);
+	memcpy(sym->name, name, namelen);
 
-	return self;
+	return sym;
 }
 
-void symbol__delete(struct symbol *self)
+void symbol__delete(struct symbol *sym)
 {
-	free(((void *)self) - symbol_conf.priv_size);
+	free(((void *)sym) - symbol_conf.priv_size);
 }
 
-static size_t symbol__fprintf(struct symbol *self, FILE *fp)
+static size_t symbol__fprintf(struct symbol *sym, FILE *fp)
 {
 	return fprintf(fp, " %" PRIx64 "-%" PRIx64 " %c %s\n",
-		       self->start, self->end,
-		       self->binding == STB_GLOBAL ? 'g' :
-		       self->binding == STB_LOCAL  ? 'l' : 'w',
-		       self->name);
+		       sym->start, sym->end,
+		       sym->binding == STB_GLOBAL ? 'g' :
+		       sym->binding == STB_LOCAL  ? 'l' : 'w',
+		       sym->name);
 }
 
-void dso__set_long_name(struct dso *self, char *name)
+void dso__set_long_name(struct dso *dso, char *name)
 {
 	if (name == NULL)
 		return;
-	self->long_name = name;
-	self->long_name_len = strlen(name);
+	dso->long_name = name;
+	dso->long_name_len = strlen(name);
 }
 
-static void dso__set_short_name(struct dso *self, const char *name)
+static void dso__set_short_name(struct dso *dso, const char *name)
 {
 	if (name == NULL)
 		return;
-	self->short_name = name;
-	self->short_name_len = strlen(name);
+	dso->short_name = name;
+	dso->short_name_len = strlen(name);
 }
 
-static void dso__set_basename(struct dso *self)
+static void dso__set_basename(struct dso *dso)
 {
-	dso__set_short_name(self, basename(self->long_name));
+	dso__set_short_name(dso, basename(dso->long_name));
 }
 
 struct dso *dso__new(const char *name)
 {
-	struct dso *self = calloc(1, sizeof(*self) + strlen(name) + 1);
+	struct dso *dso = calloc(1, sizeof(*dso) + strlen(name) + 1);
 
-	if (self != NULL) {
+	if (dso != NULL) {
 		int i;
-		strcpy(self->name, name);
-		dso__set_long_name(self, self->name);
-		dso__set_short_name(self, self->name);
+		strcpy(dso->name, name);
+		dso__set_long_name(dso, dso->name);
+		dso__set_short_name(dso, dso->name);
 		for (i = 0; i < MAP__NR_TYPES; ++i)
-			self->symbols[i] = self->symbol_names[i] = RB_ROOT;
-		self->symtab_type = SYMTAB__NOT_FOUND;
-		self->loaded = 0;
-		self->sorted_by_name = 0;
-		self->has_build_id = 0;
-		self->kernel = DSO_TYPE_USER;
-		INIT_LIST_HEAD(&self->node);
+			dso->symbols[i] = dso->symbol_names[i] = RB_ROOT;
+		dso->symtab_type = SYMTAB__NOT_FOUND;
+		dso->loaded = 0;
+		dso->sorted_by_name = 0;
+		dso->has_build_id = 0;
+		dso->kernel = DSO_TYPE_USER;
+		INIT_LIST_HEAD(&dso->node);
 	}
 
-	return self;
+	return dso;
 }
 
-static void symbols__delete(struct rb_root *self)
+static void symbols__delete(struct rb_root *symbols)
 {
 	struct symbol *pos;
-	struct rb_node *next = rb_first(self);
+	struct rb_node *next = rb_first(symbols);
 
 	while (next) {
 		pos = rb_entry(next, struct symbol, rb_node);
 		next = rb_next(&pos->rb_node);
-		rb_erase(&pos->rb_node, self);
+		rb_erase(&pos->rb_node, symbols);
 		symbol__delete(pos);
 	}
 }
 
-void dso__delete(struct dso *self)
+void dso__delete(struct dso *dso)
 {
 	int i;
 	for (i = 0; i < MAP__NR_TYPES; ++i)
-		symbols__delete(&self->symbols[i]);
-	if (self->sname_alloc)
-		free((char *)self->short_name);
-	if (self->lname_alloc)
-		free(self->long_name);
-	free(self);
+		symbols__delete(&dso->symbols[i]);
+	if (dso->sname_alloc)
+		free((char *)dso->short_name);
+	if (dso->lname_alloc)
+		free(dso->long_name);
+	free(dso);
 }
 
-void dso__set_build_id(struct dso *self, void *build_id)
+void dso__set_build_id(struct dso *dso, void *build_id)
 {
-	memcpy(self->build_id, build_id, sizeof(self->build_id));
-	self->has_build_id = 1;
+	memcpy(dso->build_id, build_id, sizeof(dso->build_id));
+	dso->has_build_id = 1;
 }
 
-static void symbols__insert(struct rb_root *self, struct symbol *sym)
+static void symbols__insert(struct rb_root *symbols, struct symbol *sym)
 {
-	struct rb_node **p = &self->rb_node;
+	struct rb_node **p = &symbols->rb_node;
 	struct rb_node *parent = NULL;
 	const u64 ip = sym->start;
 	struct symbol *s;
@@ -265,17 +265,17 @@ static void symbols__insert(struct rb_root *self, struct symbol *sym)
 			p = &(*p)->rb_right;
 	}
 	rb_link_node(&sym->rb_node, parent, p);
-	rb_insert_color(&sym->rb_node, self);
+	rb_insert_color(&sym->rb_node, symbols);
 }
 
-static struct symbol *symbols__find(struct rb_root *self, u64 ip)
+static struct symbol *symbols__find(struct rb_root *symbols, u64 ip)
 {
 	struct rb_node *n;
 
-	if (self == NULL)
+	if (symbols == NULL)
 		return NULL;
 
-	n = self->rb_node;
+	n = symbols->rb_node;
 
 	while (n) {
 		struct symbol *s = rb_entry(n, struct symbol, rb_node);
@@ -296,9 +296,9 @@ struct symbol_name_rb_node {
 	struct symbol	sym;
 };
 
-static void symbols__insert_by_name(struct rb_root *self, struct symbol *sym)
+static void symbols__insert_by_name(struct rb_root *symbols, struct symbol *sym)
 {
-	struct rb_node **p = &self->rb_node;
+	struct rb_node **p = &symbols->rb_node;
 	struct rb_node *parent = NULL;
 	struct symbol_name_rb_node *symn, *s;
 
@@ -313,27 +313,29 @@ static void symbols__insert_by_name(struct rb_root *self, struct symbol *sym)
 			p = &(*p)->rb_right;
 	}
 	rb_link_node(&symn->rb_node, parent, p);
-	rb_insert_color(&symn->rb_node, self);
+	rb_insert_color(&symn->rb_node, symbols);
 }
 
-static void symbols__sort_by_name(struct rb_root *self, struct rb_root *source)
+static void symbols__sort_by_name(struct rb_root *symbols,
+				  struct rb_root *source)
 {
 	struct rb_node *nd;
 
 	for (nd = rb_first(source); nd; nd = rb_next(nd)) {
 		struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
-		symbols__insert_by_name(self, pos);
+		symbols__insert_by_name(symbols, pos);
 	}
 }
 
-static struct symbol *symbols__find_by_name(struct rb_root *self, const char *name)
+static struct symbol *symbols__find_by_name(struct rb_root *symbols,
+					    const char *name)
 {
 	struct rb_node *n;
 
-	if (self == NULL)
+	if (symbols == NULL)
 		return NULL;
 
-	n = self->rb_node;
+	n = symbols->rb_node;
 
 	while (n) {
 		struct symbol_name_rb_node *s;
@@ -353,29 +355,29 @@ static struct symbol *symbols__find_by_name(struct rb_root *self, const char *na
 	return NULL;
 }
 
-struct symbol *dso__find_symbol(struct dso *self,
+struct symbol *dso__find_symbol(struct dso *dso,
 				enum map_type type, u64 addr)
 {
-	return symbols__find(&self->symbols[type], addr);
+	return symbols__find(&dso->symbols[type], addr);
 }
 
-struct symbol *dso__find_symbol_by_name(struct dso *self, enum map_type type,
+struct symbol *dso__find_symbol_by_name(struct dso *dso, enum map_type type,
 					const char *name)
 {
-	return symbols__find_by_name(&self->symbol_names[type], name);
+	return symbols__find_by_name(&dso->symbol_names[type], name);
 }
 
-void dso__sort_by_name(struct dso *self, enum map_type type)
+void dso__sort_by_name(struct dso *dso, enum map_type type)
 {
-	dso__set_sorted_by_name(self, type);
-	return symbols__sort_by_name(&self->symbol_names[type],
-				     &self->symbols[type]);
+	dso__set_sorted_by_name(dso, type);
+	return symbols__sort_by_name(&dso->symbol_names[type],
+				     &dso->symbols[type]);
 }
 
-int build_id__sprintf(const u8 *self, int len, char *bf)
+int build_id__sprintf(const u8 *build_id, int len, char *bf)
 {
 	char *bid = bf;
-	const u8 *raw = self;
+	const u8 *raw = build_id;
 	int i;
 
 	for (i = 0; i < len; ++i) {
@@ -384,24 +386,25 @@ int build_id__sprintf(const u8 *self, int len, char *bf)
 		bid += 2;
 	}
 
-	return raw - self;
+	return raw - build_id;
 }
 
-size_t dso__fprintf_buildid(struct dso *self, FILE *fp)
+size_t dso__fprintf_buildid(struct dso *dso, FILE *fp)
 {
 	char sbuild_id[BUILD_ID_SIZE * 2 + 1];
 
-	build_id__sprintf(self->build_id, sizeof(self->build_id), sbuild_id);
+	build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id);
 	return fprintf(fp, "%s", sbuild_id);
 }
 
-size_t dso__fprintf_symbols_by_name(struct dso *self, enum map_type type, FILE *fp)
+size_t dso__fprintf_symbols_by_name(struct dso *dso,
+				    enum map_type type, FILE *fp)
 {
 	size_t ret = 0;
 	struct rb_node *nd;
 	struct symbol_name_rb_node *pos;
 
-	for (nd = rb_first(&self->symbol_names[type]); nd; nd = rb_next(nd)) {
+	for (nd = rb_first(&dso->symbol_names[type]); nd; nd = rb_next(nd)) {
 		pos = rb_entry(nd, struct symbol_name_rb_node, rb_node);
 		fprintf(fp, "%s\n", pos->sym.name);
 	}
@@ -409,18 +412,18 @@ size_t dso__fprintf_symbols_by_name(struct dso *self, enum map_type type, FILE *
 	return ret;
 }
 
-size_t dso__fprintf(struct dso *self, enum map_type type, FILE *fp)
+size_t dso__fprintf(struct dso *dso, enum map_type type, FILE *fp)
 {
 	struct rb_node *nd;
-	size_t ret = fprintf(fp, "dso: %s (", self->short_name);
+	size_t ret = fprintf(fp, "dso: %s (", dso->short_name);
 
-	if (self->short_name != self->long_name)
-		ret += fprintf(fp, "%s, ", self->long_name);
+	if (dso->short_name != dso->long_name)
+		ret += fprintf(fp, "%s, ", dso->long_name);
 	ret += fprintf(fp, "%s, %sloaded, ", map_type__name[type],
-		       self->loaded ? "" : "NOT ");
-	ret += dso__fprintf_buildid(self, fp);
+		       dso->loaded ? "" : "NOT ");
+	ret += dso__fprintf_buildid(dso, fp);
 	ret += fprintf(fp, ")\n");
-	for (nd = rb_first(&self->symbols[type]); nd; nd = rb_next(nd)) {
+	for (nd = rb_first(&dso->symbols[type]); nd; nd = rb_next(nd)) {
 		struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
 		ret += symbol__fprintf(pos, fp);
 	}
@@ -543,10 +546,10 @@ static int map__process_kallsym_symbol(void *arg, const char *name,
  * so that we can in the next step set the symbol ->end address and then
  * call kernel_maps__split_kallsyms.
  */
-static int dso__load_all_kallsyms(struct dso *self, const char *filename,
+static int dso__load_all_kallsyms(struct dso *dso, const char *filename,
 				  struct map *map)
 {
-	struct process_kallsyms_args args = { .map = map, .dso = self, };
+	struct process_kallsyms_args args = { .map = map, .dso = dso, };
 	return kallsyms__parse(filename, &args, map__process_kallsym_symbol);
 }
 
@@ -555,7 +558,7 @@ static int dso__load_all_kallsyms(struct dso *self, const char *filename,
  * kernel range is broken in several maps, named [kernel].N, as we don't have
  * the original ELF section names vmlinux have.
  */
-static int dso__split_kallsyms(struct dso *self, struct map *map,
+static int dso__split_kallsyms(struct dso *dso, struct map *map,
 			       symbol_filter_t filter)
 {
 	struct map_groups *kmaps = map__kmap(map)->kmaps;
@@ -563,7 +566,7 @@ static int dso__split_kallsyms(struct dso *self, struct map *map,
 	struct map *curr_map = map;
 	struct symbol *pos;
 	int count = 0, moved = 0;	
-	struct rb_root *root = &self->symbols[map->type];
+	struct rb_root *root = &dso->symbols[map->type];
 	struct rb_node *next = rb_first(root);
 	int kernel_range = 0;
 
@@ -582,7 +585,7 @@ static int dso__split_kallsyms(struct dso *self, struct map *map,
 
 			if (strcmp(curr_map->dso->short_name, module)) {
 				if (curr_map != map &&
-				    self->kernel == DSO_TYPE_GUEST_KERNEL &&
+				    dso->kernel == DSO_TYPE_GUEST_KERNEL &&
 				    machine__is_default_guest(machine)) {
 					/*
 					 * We assume all symbols of a module are
@@ -618,14 +621,14 @@ static int dso__split_kallsyms(struct dso *self, struct map *map,
 			pos->end   = curr_map->map_ip(curr_map, pos->end);
 		} else if (curr_map != map) {
 			char dso_name[PATH_MAX];
-			struct dso *dso;
+			struct dso *ndso;
 
 			if (count == 0) {
 				curr_map = map;
 				goto filter_symbol;
 			}
 
-			if (self->kernel == DSO_TYPE_GUEST_KERNEL)
+			if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
 				snprintf(dso_name, sizeof(dso_name),
 					"[guest.kernel].%d",
 					kernel_range++);
@@ -634,15 +637,15 @@ static int dso__split_kallsyms(struct dso *self, struct map *map,
 					"[kernel].%d",
 					kernel_range++);
 
-			dso = dso__new(dso_name);
-			if (dso == NULL)
+			ndso = dso__new(dso_name);
+			if (ndso == NULL)
 				return -1;
 
-			dso->kernel = self->kernel;
+			ndso->kernel = dso->kernel;
 
-			curr_map = map__new2(pos->start, dso, map->type);
+			curr_map = map__new2(pos->start, ndso, map->type);
 			if (curr_map == NULL) {
-				dso__delete(dso);
+				dso__delete(ndso);
 				return -1;
 			}
 
@@ -665,7 +668,7 @@ discard_symbol:		rb_erase(&pos->rb_node, root);
 	}
 
 	if (curr_map != map &&
-	    self->kernel == DSO_TYPE_GUEST_KERNEL &&
+	    dso->kernel == DSO_TYPE_GUEST_KERNEL &&
 	    machine__is_default_guest(kmaps->machine)) {
 		dso__set_loaded(curr_map->dso, curr_map->type);
 	}
@@ -673,21 +676,21 @@ discard_symbol:		rb_erase(&pos->rb_node, root);
 	return count + moved;
 }
 
-int dso__load_kallsyms(struct dso *self, const char *filename,
+int dso__load_kallsyms(struct dso *dso, const char *filename,
 		       struct map *map, symbol_filter_t filter)
 {
-	if (dso__load_all_kallsyms(self, filename, map) < 0)
+	if (dso__load_all_kallsyms(dso, filename, map) < 0)
 		return -1;
 
-	if (self->kernel == DSO_TYPE_GUEST_KERNEL)
-		self->symtab_type = SYMTAB__GUEST_KALLSYMS;
+	if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
+		dso->symtab_type = SYMTAB__GUEST_KALLSYMS;
 	else
-		self->symtab_type = SYMTAB__KALLSYMS;
+		dso->symtab_type = SYMTAB__KALLSYMS;
 
-	return dso__split_kallsyms(self, map, filter);
+	return dso__split_kallsyms(dso, map, filter);
 }
 
-static int dso__load_perf_map(struct dso *self, struct map *map,
+static int dso__load_perf_map(struct dso *dso, struct map *map,
 			      symbol_filter_t filter)
 {
 	char *line = NULL;
@@ -695,7 +698,7 @@ static int dso__load_perf_map(struct dso *self, struct map *map,
 	FILE *file;
 	int nr_syms = 0;
 
-	file = fopen(self->long_name, "r");
+	file = fopen(dso->long_name, "r");
 	if (file == NULL)
 		goto out_failure;
 
@@ -733,7 +736,7 @@ static int dso__load_perf_map(struct dso *self, struct map *map,
 		if (filter && filter(map, sym))
 			symbol__delete(sym);
 		else {
-			symbols__insert(&self->symbols[map->type], sym);
+			symbols__insert(&dso->symbols[map->type], sym);
 			nr_syms++;
 		}
 	}
@@ -752,7 +755,7 @@ out_failure:
 /**
  * elf_symtab__for_each_symbol - iterate thru all the symbols
  *
- * @self: struct elf_symtab instance to iterate
+ * @syms: struct elf_symtab instance to iterate
  * @idx: uint32_t idx
  * @sym: GElf_Sym iterator
  */
@@ -852,7 +855,7 @@ static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep,
  * And always look at the original dso, not at debuginfo packages, that
  * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
  */
-static int dso__synthesize_plt_symbols(struct  dso *self, struct map *map,
+static int dso__synthesize_plt_symbols(struct  dso *dso, struct map *map,
 				       symbol_filter_t filter)
 {
 	uint32_t nr_rel_entries, idx;
@@ -871,7 +874,7 @@ static int dso__synthesize_plt_symbols(struct  dso *self, struct map *map,
 	char name[PATH_MAX];
 
 	snprintf(name, sizeof(name), "%s%s",
-		 symbol_conf.symfs, self->long_name);
+		 symbol_conf.symfs, dso->long_name);
 	fd = open(name, O_RDONLY);
 	if (fd < 0)
 		goto out;
@@ -947,7 +950,7 @@ static int dso__synthesize_plt_symbols(struct  dso *self, struct map *map,
 			if (filter && filter(map, f))
 				symbol__delete(f);
 			else {
-				symbols__insert(&self->symbols[map->type], f);
+				symbols__insert(&dso->symbols[map->type], f);
 				++nr;
 			}
 		}
@@ -969,7 +972,7 @@ static int dso__synthesize_plt_symbols(struct  dso *self, struct map *map,
 			if (filter && filter(map, f))
 				symbol__delete(f);
 			else {
-				symbols__insert(&self->symbols[map->type], f);
+				symbols__insert(&dso->symbols[map->type], f);
 				++nr;
 			}
 		}
@@ -985,29 +988,30 @@ out_close:
 		return nr;
 out:
 	pr_debug("%s: problems reading %s PLT info.\n",
-		 __func__, self->long_name);
+		 __func__, dso->long_name);
 	return 0;
 }
 
-static bool elf_sym__is_a(GElf_Sym *self, enum map_type type)
+static bool elf_sym__is_a(GElf_Sym *sym, enum map_type type)
 {
 	switch (type) {
 	case MAP__FUNCTION:
-		return elf_sym__is_function(self);
+		return elf_sym__is_function(sym);
 	case MAP__VARIABLE:
-		return elf_sym__is_object(self);
+		return elf_sym__is_object(sym);
 	default:
 		return false;
 	}
 }
 
-static bool elf_sec__is_a(GElf_Shdr *self, Elf_Data *secstrs, enum map_type type)
+static bool elf_sec__is_a(GElf_Shdr *shdr, Elf_Data *secstrs,
+			  enum map_type type)
 {
 	switch (type) {
 	case MAP__FUNCTION:
-		return elf_sec__is_text(self, secstrs);
+		return elf_sec__is_text(shdr, secstrs);
 	case MAP__VARIABLE:
-		return elf_sec__is_data(self, secstrs);
+		return elf_sec__is_data(shdr, secstrs);
 	default:
 		return false;
 	}
@@ -1032,13 +1036,13 @@ static size_t elf_addr_to_index(Elf *elf, GElf_Addr addr)
 	return -1;
 }
 
-static int dso__load_sym(struct dso *self, struct map *map, const char *name,
+static int dso__load_sym(struct dso *dso, struct map *map, const char *name,
 			 int fd, symbol_filter_t filter, int kmodule,
 			 int want_symtab)
 {
-	struct kmap *kmap = self->kernel ? map__kmap(map) : NULL;
+	struct kmap *kmap = dso->kernel ? map__kmap(map) : NULL;
 	struct map *curr_map = map;
-	struct dso *curr_dso = self;
+	struct dso *curr_dso = dso;
 	Elf_Data *symstrs, *secstrs;
 	uint32_t nr_syms;
 	int err = -1;
@@ -1064,14 +1068,14 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name,
 	}
 
 	/* Always reject images with a mismatched build-id: */
-	if (self->has_build_id) {
+	if (dso->has_build_id) {
 		u8 build_id[BUILD_ID_SIZE];
 
 		if (elf_read_build_id(elf, build_id,
 				      BUILD_ID_SIZE) != BUILD_ID_SIZE)
 			goto out_elf_end;
 
-		if (!dso__build_id_equal(self, build_id))
+		if (!dso__build_id_equal(dso, build_id))
 			goto out_elf_end;
 	}
 
@@ -1112,13 +1116,14 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name,
 	nr_syms = shdr.sh_size / shdr.sh_entsize;
 
 	memset(&sym, 0, sizeof(sym));
-	if (self->kernel == DSO_TYPE_USER) {
-		self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
+	if (dso->kernel == DSO_TYPE_USER) {
+		dso->adjust_symbols = (ehdr.e_type == ET_EXEC ||
 				elf_section_by_name(elf, &ehdr, &shdr,
 						     ".gnu.prelink_undo",
 						     NULL) != NULL);
-	} else self->adjust_symbols = 0;
-
+	} else {
+		dso->adjust_symbols = 0;
+	}
 	elf_symtab__for_each_symbol(syms, nr_syms, idx, sym) {
 		struct symbol *f;
 		const char *elf_name = elf_sym__name(&sym, symstrs);
@@ -1168,22 +1173,22 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name,
 		    (sym.st_value & 1))
 			--sym.st_value;
 
-		if (self->kernel != DSO_TYPE_USER || kmodule) {
+		if (dso->kernel != DSO_TYPE_USER || kmodule) {
 			char dso_name[PATH_MAX];
 
 			if (strcmp(section_name,
 				   (curr_dso->short_name +
-				    self->short_name_len)) == 0)
+				    dso->short_name_len)) == 0)
 				goto new_symbol;
 
 			if (strcmp(section_name, ".text") == 0) {
 				curr_map = map;
-				curr_dso = self;
+				curr_dso = dso;
 				goto new_symbol;
 			}
 
 			snprintf(dso_name, sizeof(dso_name),
-				 "%s%s", self->short_name, section_name);
+				 "%s%s", dso->short_name, section_name);
 
 			curr_map = map_groups__find_by_name(kmap->kmaps, map->type, dso_name);
 			if (curr_map == NULL) {
@@ -1195,7 +1200,9 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name,
 				curr_dso = dso__new(dso_name);
 				if (curr_dso == NULL)
 					goto out_elf_end;
-				curr_dso->kernel = self->kernel;
+				curr_dso->kernel = dso->kernel;
+				curr_dso->long_name = dso->long_name;
+				curr_dso->long_name_len = dso->long_name_len;
 				curr_map = map__new2(start, curr_dso,
 						     map->type);
 				if (curr_map == NULL) {
@@ -1204,9 +1211,9 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name,
 				}
 				curr_map->map_ip = identity__map_ip;
 				curr_map->unmap_ip = identity__map_ip;
-				curr_dso->symtab_type = self->symtab_type;
+				curr_dso->symtab_type = dso->symtab_type;
 				map_groups__insert(kmap->kmaps, curr_map);
-				dsos__add(&self->node, curr_dso);
+				dsos__add(&dso->node, curr_dso);
 				dso__set_loaded(curr_dso, map->type);
 			} else
 				curr_dso = curr_map->dso;
@@ -1248,7 +1255,7 @@ new_symbol:
 	 * For misannotated, zeroed, ASM function sizes.
 	 */
 	if (nr > 0) {
-		symbols__fixup_end(&self->symbols[map->type]);
+		symbols__fixup_end(&dso->symbols[map->type]);
 		if (kmap) {
 			/*
 			 * We need to fixup this here too because we create new
@@ -1264,9 +1271,9 @@ out_close:
 	return err;
 }
 
-static bool dso__build_id_equal(const struct dso *self, u8 *build_id)
+static bool dso__build_id_equal(const struct dso *dso, u8 *build_id)
 {
-	return memcmp(self->build_id, build_id, sizeof(self->build_id)) == 0;
+	return memcmp(dso->build_id, build_id, sizeof(dso->build_id)) == 0;
 }
 
 bool __dsos__read_build_ids(struct list_head *head, bool with_hits)
@@ -1427,7 +1434,7 @@ out:
 	return err;
 }
 
-char dso__symtab_origin(const struct dso *self)
+char dso__symtab_origin(const struct dso *dso)
 {
 	static const char origin[] = {
 		[SYMTAB__KALLSYMS]	      = 'k',
@@ -1442,12 +1449,12 @@ char dso__symtab_origin(const struct dso *self)
 		[SYMTAB__GUEST_KMODULE]	      =  'G',
 	};
 
-	if (self == NULL || self->symtab_type == SYMTAB__NOT_FOUND)
+	if (dso == NULL || dso->symtab_type == SYMTAB__NOT_FOUND)
 		return '!';
-	return origin[self->symtab_type];
+	return origin[dso->symtab_type];
 }
 
-int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
+int dso__load(struct dso *dso, struct map *map, symbol_filter_t filter)
 {
 	int size = PATH_MAX;
 	char *name;
@@ -1457,12 +1464,12 @@ int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
 	const char *root_dir;
 	int want_symtab;
 
-	dso__set_loaded(self, map->type);
+	dso__set_loaded(dso, map->type);
 
-	if (self->kernel == DSO_TYPE_KERNEL)
-		return dso__load_kernel_sym(self, map, filter);
-	else if (self->kernel == DSO_TYPE_GUEST_KERNEL)
-		return dso__load_guest_kernel_sym(self, map, filter);
+	if (dso->kernel == DSO_TYPE_KERNEL)
+		return dso__load_kernel_sym(dso, map, filter);
+	else if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
+		return dso__load_guest_kernel_sym(dso, map, filter);
 
 	if (map->groups && map->groups->machine)
 		machine = map->groups->machine;
@@ -1473,11 +1480,11 @@ int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
 	if (!name)
 		return -1;
 
-	self->adjust_symbols = 0;
+	dso->adjust_symbols = 0;
 
-	if (strncmp(self->name, "/tmp/perf-", 10) == 0) {
-		ret = dso__load_perf_map(self, map, filter);
-		self->symtab_type = ret > 0 ? SYMTAB__JAVA_JIT :
+	if (strncmp(dso->name, "/tmp/perf-", 10) == 0) {
+		ret = dso__load_perf_map(dso, map, filter);
+		dso->symtab_type = ret > 0 ? SYMTAB__JAVA_JIT :
 					      SYMTAB__NOT_FOUND;
 		return ret;
 	}
@@ -1488,33 +1495,33 @@ int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
 	 */
 	want_symtab = 1;
 restart:
-	for (self->symtab_type = SYMTAB__BUILD_ID_CACHE;
-	     self->symtab_type != SYMTAB__NOT_FOUND;
-	     self->symtab_type++) {
-		switch (self->symtab_type) {
+	for (dso->symtab_type = SYMTAB__BUILD_ID_CACHE;
+	     dso->symtab_type != SYMTAB__NOT_FOUND;
+	     dso->symtab_type++) {
+		switch (dso->symtab_type) {
 		case SYMTAB__BUILD_ID_CACHE:
 			/* skip the locally configured cache if a symfs is given */
 			if (symbol_conf.symfs[0] ||
-			    (dso__build_id_filename(self, name, size) == NULL)) {
+			    (dso__build_id_filename(dso, name, size) == NULL)) {
 				continue;
 			}
 			break;
 		case SYMTAB__FEDORA_DEBUGINFO:
 			snprintf(name, size, "%s/usr/lib/debug%s.debug",
-				 symbol_conf.symfs, self->long_name);
+				 symbol_conf.symfs, dso->long_name);
 			break;
 		case SYMTAB__UBUNTU_DEBUGINFO:
 			snprintf(name, size, "%s/usr/lib/debug%s",
-				 symbol_conf.symfs, self->long_name);
+				 symbol_conf.symfs, dso->long_name);
 			break;
 		case SYMTAB__BUILDID_DEBUGINFO: {
 			char build_id_hex[BUILD_ID_SIZE * 2 + 1];
 
-			if (!self->has_build_id)
+			if (!dso->has_build_id)
 				continue;
 
-			build_id__sprintf(self->build_id,
-					  sizeof(self->build_id),
+			build_id__sprintf(dso->build_id,
+					  sizeof(dso->build_id),
 					  build_id_hex);
 			snprintf(name, size,
 				 "%s/usr/lib/debug/.build-id/%.2s/%s.debug",
@@ -1523,7 +1530,7 @@ restart:
 			break;
 		case SYMTAB__SYSTEM_PATH_DSO:
 			snprintf(name, size, "%s%s",
-			     symbol_conf.symfs, self->long_name);
+			     symbol_conf.symfs, dso->long_name);
 			break;
 		case SYMTAB__GUEST_KMODULE:
 			if (map->groups && machine)
@@ -1531,12 +1538,12 @@ restart:
 			else
 				root_dir = "";
 			snprintf(name, size, "%s%s%s", symbol_conf.symfs,
-				 root_dir, self->long_name);
+				 root_dir, dso->long_name);
 			break;
 
 		case SYMTAB__SYSTEM_PATH_KMODULE:
 			snprintf(name, size, "%s%s", symbol_conf.symfs,
-				 self->long_name);
+				 dso->long_name);
 			break;
 		default:;
 		}
@@ -1546,7 +1553,7 @@ restart:
 		if (fd < 0)
 			continue;
 
-		ret = dso__load_sym(self, map, name, fd, filter, 0,
+		ret = dso__load_sym(dso, map, name, fd, filter, 0,
 				    want_symtab);
 		close(fd);
 
@@ -1558,7 +1565,8 @@ restart:
 			continue;
 
 		if (ret > 0) {
-			int nr_plt = dso__synthesize_plt_symbols(self, map, filter);
+			int nr_plt = dso__synthesize_plt_symbols(dso, map,
+								 filter);
 			if (nr_plt > 0)
 				ret += nr_plt;
 			break;
@@ -1575,17 +1583,17 @@ restart:
 	}
 
 	free(name);
-	if (ret < 0 && strstr(self->name, " (deleted)") != NULL)
+	if (ret < 0 && strstr(dso->name, " (deleted)") != NULL)
 		return 0;
 	return ret;
 }
 
-struct map *map_groups__find_by_name(struct map_groups *self,
+struct map *map_groups__find_by_name(struct map_groups *mg,
 				     enum map_type type, const char *name)
 {
 	struct rb_node *nd;
 
-	for (nd = rb_first(&self->maps[type]); nd; nd = rb_next(nd)) {
+	for (nd = rb_first(&mg->maps[type]); nd; nd = rb_next(nd)) {
 		struct map *map = rb_entry(nd, struct map, rb_node);
 
 		if (map->dso && strcmp(map->dso->short_name, name) == 0)
@@ -1595,28 +1603,28 @@ struct map *map_groups__find_by_name(struct map_groups *self,
 	return NULL;
 }
 
-static int dso__kernel_module_get_build_id(struct dso *self,
-				const char *root_dir)
+static int dso__kernel_module_get_build_id(struct dso *dso,
+					   const char *root_dir)
 {
 	char filename[PATH_MAX];
 	/*
 	 * kernel module short names are of the form "[module]" and
 	 * we need just "module" here.
 	 */
-	const char *name = self->short_name + 1;
+	const char *name = dso->short_name + 1;
 
 	snprintf(filename, sizeof(filename),
 		 "%s/sys/module/%.*s/notes/.note.gnu.build-id",
 		 root_dir, (int)strlen(name) - 1, name);
 
-	if (sysfs__read_build_id(filename, self->build_id,
-				 sizeof(self->build_id)) == 0)
-		self->has_build_id = true;
+	if (sysfs__read_build_id(filename, dso->build_id,
+				 sizeof(dso->build_id)) == 0)
+		dso->has_build_id = true;
 
 	return 0;
 }
 
-static int map_groups__set_modules_path_dir(struct map_groups *self,
+static int map_groups__set_modules_path_dir(struct map_groups *mg,
 				const char *dir_name)
 {
 	struct dirent *dent;
@@ -1644,7 +1652,7 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
 
 			snprintf(path, sizeof(path), "%s/%s",
 				 dir_name, dent->d_name);
-			ret = map_groups__set_modules_path_dir(self, path);
+			ret = map_groups__set_modules_path_dir(mg, path);
 			if (ret < 0)
 				goto out;
 		} else {
@@ -1659,7 +1667,8 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
 				 (int)(dot - dent->d_name), dent->d_name);
 
 			strxfrchar(dso_name, '-', '_');
-			map = map_groups__find_by_name(self, MAP__FUNCTION, dso_name);
+			map = map_groups__find_by_name(mg, MAP__FUNCTION,
+						       dso_name);
 			if (map == NULL)
 				continue;
 
@@ -1709,20 +1718,20 @@ static char *get_kernel_version(const char *root_dir)
 	return strdup(name);
 }
 
-static int machine__set_modules_path(struct machine *self)
+static int machine__set_modules_path(struct machine *machine)
 {
 	char *version;
 	char modules_path[PATH_MAX];
 
-	version = get_kernel_version(self->root_dir);
+	version = get_kernel_version(machine->root_dir);
 	if (!version)
 		return -1;
 
 	snprintf(modules_path, sizeof(modules_path), "%s/lib/modules/%s/kernel",
-		 self->root_dir, version);
+		 machine->root_dir, version);
 	free(version);
 
-	return map_groups__set_modules_path_dir(&self->kmaps, modules_path);
+	return map_groups__set_modules_path_dir(&machine->kmaps, modules_path);
 }
 
 /*
@@ -1732,23 +1741,23 @@ static int machine__set_modules_path(struct machine *self)
  */
 static struct map *map__new2(u64 start, struct dso *dso, enum map_type type)
 {
-	struct map *self = calloc(1, (sizeof(*self) +
-				      (dso->kernel ? sizeof(struct kmap) : 0)));
-	if (self != NULL) {
+	struct map *map = calloc(1, (sizeof(*map) +
+				     (dso->kernel ? sizeof(struct kmap) : 0)));
+	if (map != NULL) {
 		/*
 		 * ->end will be filled after we load all the symbols
 		 */
-		map__init(self, type, start, 0, 0, dso);
+		map__init(map, type, start, 0, 0, dso);
 	}
 
-	return self;
+	return map;
 }
 
-struct map *machine__new_module(struct machine *self, u64 start,
+struct map *machine__new_module(struct machine *machine, u64 start,
 				const char *filename)
 {
 	struct map *map;
-	struct dso *dso = __dsos__findnew(&self->kernel_dsos, filename);
+	struct dso *dso = __dsos__findnew(&machine->kernel_dsos, filename);
 
 	if (dso == NULL)
 		return NULL;
@@ -1757,15 +1766,15 @@ struct map *machine__new_module(struct machine *self, u64 start,
 	if (map == NULL)
 		return NULL;
 
-	if (machine__is_host(self))
+	if (machine__is_host(machine))
 		dso->symtab_type = SYMTAB__SYSTEM_PATH_KMODULE;
 	else
 		dso->symtab_type = SYMTAB__GUEST_KMODULE;
-	map_groups__insert(&self->kmaps, map);
+	map_groups__insert(&machine->kmaps, map);
 	return map;
 }
 
-static int machine__create_modules(struct machine *self)
+static int machine__create_modules(struct machine *machine)
 {
 	char *line = NULL;
 	size_t n;
@@ -1774,10 +1783,10 @@ static int machine__create_modules(struct machine *self)
 	const char *modules;
 	char path[PATH_MAX];
 
-	if (machine__is_default_guest(self))
+	if (machine__is_default_guest(machine))
 		modules = symbol_conf.default_guest_modules;
 	else {
-		sprintf(path, "%s/proc/modules", self->root_dir);
+		sprintf(path, "%s/proc/modules", machine->root_dir);
 		modules = path;
 	}
 
@@ -1813,16 +1822,16 @@ static int machine__create_modules(struct machine *self)
 		*sep = '\0';
 
 		snprintf(name, sizeof(name), "[%s]", line);
-		map = machine__new_module(self, start, name);
+		map = machine__new_module(machine, start, name);
 		if (map == NULL)
 			goto out_delete_line;
-		dso__kernel_module_get_build_id(map->dso, self->root_dir);
+		dso__kernel_module_get_build_id(map->dso, machine->root_dir);
 	}
 
 	free(line);
 	fclose(file);
 
-	return machine__set_modules_path(self);
+	return machine__set_modules_path(machine);
 
 out_delete_line:
 	free(line);
@@ -1830,7 +1839,7 @@ out_failure:
 	return -1;
 }
 
-int dso__load_vmlinux(struct dso *self, struct map *map,
+int dso__load_vmlinux(struct dso *dso, struct map *map,
 		      const char *vmlinux, symbol_filter_t filter)
 {
 	int err = -1, fd;
@@ -1842,8 +1851,9 @@ int dso__load_vmlinux(struct dso *self, struct map *map,
 	if (fd < 0)
 		return -1;
 
-	dso__set_loaded(self, map->type);
-	err = dso__load_sym(self, map, symfs_vmlinux, fd, filter, 0, 0);
+	dso__set_long_name(dso, (char *)vmlinux);
+	dso__set_loaded(dso, map->type);
+	err = dso__load_sym(dso, map, symfs_vmlinux, fd, filter, 0, 0);
 	close(fd);
 
 	if (err > 0)
@@ -1852,7 +1862,7 @@ int dso__load_vmlinux(struct dso *self, struct map *map,
 	return err;
 }
 
-int dso__load_vmlinux_path(struct dso *self, struct map *map,
+int dso__load_vmlinux_path(struct dso *dso, struct map *map,
 			   symbol_filter_t filter)
 {
 	int i, err = 0;
@@ -1861,20 +1871,20 @@ int dso__load_vmlinux_path(struct dso *self, struct map *map,
 	pr_debug("Looking at the vmlinux_path (%d entries long)\n",
 		 vmlinux_path__nr_entries + 1);
 
-	filename = dso__build_id_filename(self, NULL, 0);
+	filename = dso__build_id_filename(dso, NULL, 0);
 	if (filename != NULL) {
-		err = dso__load_vmlinux(self, map, filename, filter);
+		err = dso__load_vmlinux(dso, map, filename, filter);
 		if (err > 0) {
-			dso__set_long_name(self, filename);
+			dso__set_long_name(dso, filename);
 			goto out;
 		}
 		free(filename);
 	}
 
 	for (i = 0; i < vmlinux_path__nr_entries; ++i) {
-		err = dso__load_vmlinux(self, map, vmlinux_path[i], filter);
+		err = dso__load_vmlinux(dso, map, vmlinux_path[i], filter);
 		if (err > 0) {
-			dso__set_long_name(self, strdup(vmlinux_path[i]));
+			dso__set_long_name(dso, strdup(vmlinux_path[i]));
 			break;
 		}
 	}
@@ -1882,7 +1892,7 @@ out:
 	return err;
 }
 
-static int dso__load_kernel_sym(struct dso *self, struct map *map,
+static int dso__load_kernel_sym(struct dso *dso, struct map *map,
 				symbol_filter_t filter)
 {
 	int err;
@@ -1909,10 +1919,10 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 	}
 
 	if (symbol_conf.vmlinux_name != NULL) {
-		err = dso__load_vmlinux(self, map,
+		err = dso__load_vmlinux(dso, map,
 					symbol_conf.vmlinux_name, filter);
 		if (err > 0) {
-			dso__set_long_name(self,
+			dso__set_long_name(dso,
 					   strdup(symbol_conf.vmlinux_name));
 			goto out_fixup;
 		}
@@ -1920,7 +1930,7 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 	}
 
 	if (vmlinux_path != NULL) {
-		err = dso__load_vmlinux_path(self, map, filter);
+		err = dso__load_vmlinux_path(dso, map, filter);
 		if (err > 0)
 			goto out_fixup;
 	}
@@ -1934,13 +1944,13 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 	 * we have a build-id, so check if it is the same as the running kernel,
 	 * using it if it is.
 	 */
-	if (self->has_build_id) {
+	if (dso->has_build_id) {
 		u8 kallsyms_build_id[BUILD_ID_SIZE];
 		char sbuild_id[BUILD_ID_SIZE * 2 + 1];
 
 		if (sysfs__read_build_id("/sys/kernel/notes", kallsyms_build_id,
 					 sizeof(kallsyms_build_id)) == 0) {
-			if (dso__build_id_equal(self, kallsyms_build_id)) {
+			if (dso__build_id_equal(dso, kallsyms_build_id)) {
 				kallsyms_filename = "/proc/kallsyms";
 				goto do_kallsyms;
 			}
@@ -1949,7 +1959,7 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 		 * Now look if we have it on the build-id cache in
 		 * $HOME/.debug/[kernel.kallsyms].
 		 */
-		build_id__sprintf(self->build_id, sizeof(self->build_id),
+		build_id__sprintf(dso->build_id, sizeof(dso->build_id),
 				  sbuild_id);
 
 		if (asprintf(&kallsyms_allocated_filename,
@@ -1976,7 +1986,7 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 	}
 
 do_kallsyms:
-	err = dso__load_kallsyms(self, kallsyms_filename, map, filter);
+	err = dso__load_kallsyms(dso, kallsyms_filename, map, filter);
 	if (err > 0)
 		pr_debug("Using %s for symbols\n", kallsyms_filename);
 	free(kallsyms_allocated_filename);
@@ -1984,7 +1994,7 @@ do_kallsyms:
 	if (err > 0) {
 out_fixup:
 		if (kallsyms_filename != NULL)
-			dso__set_long_name(self, strdup("[kernel.kallsyms]"));
+			dso__set_long_name(dso, strdup("[kernel.kallsyms]"));
 		map__fixup_start(map);
 		map__fixup_end(map);
 	}
@@ -1992,8 +2002,8 @@ out_fixup:
 	return err;
 }
 
-static int dso__load_guest_kernel_sym(struct dso *self, struct map *map,
-				symbol_filter_t filter)
+static int dso__load_guest_kernel_sym(struct dso *dso, struct map *map,
+				      symbol_filter_t filter)
 {
 	int err;
 	const char *kallsyms_filename = NULL;
@@ -2013,7 +2023,7 @@ static int dso__load_guest_kernel_sym(struct dso *self, struct map *map,
 		 * Or use file guest_kallsyms inputted by user on commandline
 		 */
 		if (symbol_conf.default_guest_vmlinux_name != NULL) {
-			err = dso__load_vmlinux(self, map,
+			err = dso__load_vmlinux(dso, map,
 				symbol_conf.default_guest_vmlinux_name, filter);
 			goto out_try_fixup;
 		}
@@ -2026,7 +2036,7 @@ static int dso__load_guest_kernel_sym(struct dso *self, struct map *map,
 		kallsyms_filename = path;
 	}
 
-	err = dso__load_kallsyms(self, kallsyms_filename, map, filter);
+	err = dso__load_kallsyms(dso, kallsyms_filename, map, filter);
 	if (err > 0)
 		pr_debug("Using %s for symbols\n", kallsyms_filename);
 
@@ -2034,7 +2044,7 @@ out_try_fixup:
 	if (err > 0) {
 		if (kallsyms_filename != NULL) {
 			machine__mmap_name(machine, path, sizeof(path));
-			dso__set_long_name(self, strdup(path));
+			dso__set_long_name(dso, strdup(path));
 		}
 		map__fixup_start(map);
 		map__fixup_end(map);
@@ -2087,12 +2097,12 @@ size_t __dsos__fprintf(struct list_head *head, FILE *fp)
 	return ret;
 }
 
-size_t machines__fprintf_dsos(struct rb_root *self, FILE *fp)
+size_t machines__fprintf_dsos(struct rb_root *machines, FILE *fp)
 {
 	struct rb_node *nd;
 	size_t ret = 0;
 
-	for (nd = rb_first(self); nd; nd = rb_next(nd)) {
+	for (nd = rb_first(machines); nd; nd = rb_next(nd)) {
 		struct machine *pos = rb_entry(nd, struct machine, rb_node);
 		ret += __dsos__fprintf(&pos->kernel_dsos, fp);
 		ret += __dsos__fprintf(&pos->user_dsos, fp);
@@ -2116,18 +2126,20 @@ static size_t __dsos__fprintf_buildid(struct list_head *head, FILE *fp,
 	return ret;
 }
 
-size_t machine__fprintf_dsos_buildid(struct machine *self, FILE *fp, bool with_hits)
+size_t machine__fprintf_dsos_buildid(struct machine *machine, FILE *fp,
+				     bool with_hits)
 {
-	return __dsos__fprintf_buildid(&self->kernel_dsos, fp, with_hits) +
-	       __dsos__fprintf_buildid(&self->user_dsos, fp, with_hits);
+	return __dsos__fprintf_buildid(&machine->kernel_dsos, fp, with_hits) +
+	       __dsos__fprintf_buildid(&machine->user_dsos, fp, with_hits);
 }
 
-size_t machines__fprintf_dsos_buildid(struct rb_root *self, FILE *fp, bool with_hits)
+size_t machines__fprintf_dsos_buildid(struct rb_root *machines,
+				      FILE *fp, bool with_hits)
 {
 	struct rb_node *nd;
 	size_t ret = 0;
 
-	for (nd = rb_first(self); nd; nd = rb_next(nd)) {
+	for (nd = rb_first(machines); nd; nd = rb_next(nd)) {
 		struct machine *pos = rb_entry(nd, struct machine, rb_node);
 		ret += machine__fprintf_dsos_buildid(pos, fp, with_hits);
 	}
@@ -2136,59 +2148,59 @@ size_t machines__fprintf_dsos_buildid(struct rb_root *self, FILE *fp, bool with_
 
 struct dso *dso__new_kernel(const char *name)
 {
-	struct dso *self = dso__new(name ?: "[kernel.kallsyms]");
+	struct dso *dso = dso__new(name ?: "[kernel.kallsyms]");
 
-	if (self != NULL) {
-		dso__set_short_name(self, "[kernel]");
-		self->kernel = DSO_TYPE_KERNEL;
+	if (dso != NULL) {
+		dso__set_short_name(dso, "[kernel]");
+		dso->kernel = DSO_TYPE_KERNEL;
 	}
 
-	return self;
+	return dso;
 }
 
 static struct dso *dso__new_guest_kernel(struct machine *machine,
 					const char *name)
 {
 	char bf[PATH_MAX];
-	struct dso *self = dso__new(name ?: machine__mmap_name(machine, bf, sizeof(bf)));
-
-	if (self != NULL) {
-		dso__set_short_name(self, "[guest.kernel]");
-		self->kernel = DSO_TYPE_GUEST_KERNEL;
+	struct dso *dso = dso__new(name ?: machine__mmap_name(machine, bf,
+							      sizeof(bf)));
+	if (dso != NULL) {
+		dso__set_short_name(dso, "[guest.kernel]");
+		dso->kernel = DSO_TYPE_GUEST_KERNEL;
 	}
 
-	return self;
+	return dso;
 }
 
-void dso__read_running_kernel_build_id(struct dso *self, struct machine *machine)
+void dso__read_running_kernel_build_id(struct dso *dso, struct machine *machine)
 {
 	char path[PATH_MAX];
 
 	if (machine__is_default_guest(machine))
 		return;
 	sprintf(path, "%s/sys/kernel/notes", machine->root_dir);
-	if (sysfs__read_build_id(path, self->build_id,
-				 sizeof(self->build_id)) == 0)
-		self->has_build_id = true;
+	if (sysfs__read_build_id(path, dso->build_id,
+				 sizeof(dso->build_id)) == 0)
+		dso->has_build_id = true;
 }
 
-static struct dso *machine__create_kernel(struct machine *self)
+static struct dso *machine__create_kernel(struct machine *machine)
 {
 	const char *vmlinux_name = NULL;
 	struct dso *kernel;
 
-	if (machine__is_host(self)) {
+	if (machine__is_host(machine)) {
 		vmlinux_name = symbol_conf.vmlinux_name;
 		kernel = dso__new_kernel(vmlinux_name);
 	} else {
-		if (machine__is_default_guest(self))
+		if (machine__is_default_guest(machine))
 			vmlinux_name = symbol_conf.default_guest_vmlinux_name;
-		kernel = dso__new_guest_kernel(self, vmlinux_name);
+		kernel = dso__new_guest_kernel(machine, vmlinux_name);
 	}
 
 	if (kernel != NULL) {
-		dso__read_running_kernel_build_id(kernel, self);
-		dsos__add(&self->kernel_dsos, kernel);
+		dso__read_running_kernel_build_id(kernel, machine);
+		dsos__add(&machine->kernel_dsos, kernel);
 	}
 	return kernel;
 }
@@ -2233,41 +2245,43 @@ static u64 machine__get_kernel_start_addr(struct machine *machine)
 	return args.start;
 }
 
-int __machine__create_kernel_maps(struct machine *self, struct dso *kernel)
+int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel)
 {
 	enum map_type type;
-	u64 start = machine__get_kernel_start_addr(self);
+	u64 start = machine__get_kernel_start_addr(machine);
 
 	for (type = 0; type < MAP__NR_TYPES; ++type) {
 		struct kmap *kmap;
 
-		self->vmlinux_maps[type] = map__new2(start, kernel, type);
-		if (self->vmlinux_maps[type] == NULL)
+		machine->vmlinux_maps[type] = map__new2(start, kernel, type);
+		if (machine->vmlinux_maps[type] == NULL)
 			return -1;
 
-		self->vmlinux_maps[type]->map_ip =
-			self->vmlinux_maps[type]->unmap_ip = identity__map_ip;
-
-		kmap = map__kmap(self->vmlinux_maps[type]);
-		kmap->kmaps = &self->kmaps;
-		map_groups__insert(&self->kmaps, self->vmlinux_maps[type]);
+		machine->vmlinux_maps[type]->map_ip =
+			machine->vmlinux_maps[type]->unmap_ip =
+				identity__map_ip;
+		kmap = map__kmap(machine->vmlinux_maps[type]);
+		kmap->kmaps = &machine->kmaps;
+		map_groups__insert(&machine->kmaps,
+				   machine->vmlinux_maps[type]);
 	}
 
 	return 0;
 }
 
-void machine__destroy_kernel_maps(struct machine *self)
+void machine__destroy_kernel_maps(struct machine *machine)
 {
 	enum map_type type;
 
 	for (type = 0; type < MAP__NR_TYPES; ++type) {
 		struct kmap *kmap;
 
-		if (self->vmlinux_maps[type] == NULL)
+		if (machine->vmlinux_maps[type] == NULL)
 			continue;
 
-		kmap = map__kmap(self->vmlinux_maps[type]);
-		map_groups__remove(&self->kmaps, self->vmlinux_maps[type]);
+		kmap = map__kmap(machine->vmlinux_maps[type]);
+		map_groups__remove(&machine->kmaps,
+				   machine->vmlinux_maps[type]);
 		if (kmap->ref_reloc_sym) {
 			/*
 			 * ref_reloc_sym is shared among all maps, so free just
@@ -2281,25 +2295,25 @@ void machine__destroy_kernel_maps(struct machine *self)
 			kmap->ref_reloc_sym = NULL;
 		}
 
-		map__delete(self->vmlinux_maps[type]);
-		self->vmlinux_maps[type] = NULL;
+		map__delete(machine->vmlinux_maps[type]);
+		machine->vmlinux_maps[type] = NULL;
 	}
 }
 
-int machine__create_kernel_maps(struct machine *self)
+int machine__create_kernel_maps(struct machine *machine)
 {
-	struct dso *kernel = machine__create_kernel(self);
+	struct dso *kernel = machine__create_kernel(machine);
 
 	if (kernel == NULL ||
-	    __machine__create_kernel_maps(self, kernel) < 0)
+	    __machine__create_kernel_maps(machine, kernel) < 0)
 		return -1;
 
-	if (symbol_conf.use_modules && machine__create_modules(self) < 0)
+	if (symbol_conf.use_modules && machine__create_modules(machine) < 0)
 		pr_debug("Problems creating module maps, continuing anyway...\n");
 	/*
 	 * Now that we have all the maps created, just set the ->end of them:
 	 */
-	map_groups__fixup_end(&self->kmaps);
+	map_groups__fixup_end(&machine->kmaps);
 	return 0;
 }
 
@@ -2363,11 +2377,11 @@ out_fail:
 	return -1;
 }
 
-size_t machine__fprintf_vmlinux_path(struct machine *self, FILE *fp)
+size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp)
 {
 	int i;
 	size_t printed = 0;
-	struct dso *kdso = self->vmlinux_maps[MAP__FUNCTION]->dso;
+	struct dso *kdso = machine->vmlinux_maps[MAP__FUNCTION]->dso;
 
 	if (kdso->has_build_id) {
 		char filename[PATH_MAX];
@@ -2403,6 +2417,8 @@ int symbol__init(void)
 	if (symbol_conf.initialized)
 		return 0;
 
+	symbol_conf.priv_size = ALIGN(symbol_conf.priv_size, sizeof(u64));
+
 	elf_version(EV_CURRENT);
 	if (symbol_conf.sort_by_name)
 		symbol_conf.priv_size += (sizeof(struct symbol_name_rb_node) -
@@ -2462,9 +2478,9 @@ void symbol__exit(void)
 	symbol_conf.initialized = false;
 }
 
-int machines__create_kernel_maps(struct rb_root *self, pid_t pid)
+int machines__create_kernel_maps(struct rb_root *machines, pid_t pid)
 {
-	struct machine *machine = machines__findnew(self, pid);
+	struct machine *machine = machines__findnew(machines, pid);
 
 	if (machine == NULL)
 		return -1;
@@ -2515,7 +2531,7 @@ char *strxfrchar(char *s, char from, char to)
 	return s;
 }
 
-int machines__create_guest_kernel_maps(struct rb_root *self)
+int machines__create_guest_kernel_maps(struct rb_root *machines)
 {
 	int ret = 0;
 	struct dirent **namelist = NULL;
@@ -2526,7 +2542,7 @@ int machines__create_guest_kernel_maps(struct rb_root *self)
 	if (symbol_conf.default_guest_vmlinux_name ||
 	    symbol_conf.default_guest_modules ||
 	    symbol_conf.default_guest_kallsyms) {
-		machines__create_kernel_maps(self, DEFAULT_GUEST_KERNEL_ID);
+		machines__create_kernel_maps(machines, DEFAULT_GUEST_KERNEL_ID);
 	}
 
 	if (symbol_conf.guestmount) {
@@ -2547,7 +2563,7 @@ int machines__create_guest_kernel_maps(struct rb_root *self)
 				pr_debug("Can't access file %s\n", path);
 				goto failure;
 			}
-			machines__create_kernel_maps(self, pid);
+			machines__create_kernel_maps(machines, pid);
 		}
 failure:
 		free(namelist);
@@ -2556,23 +2572,23 @@ failure:
 	return ret;
 }
 
-void machines__destroy_guest_kernel_maps(struct rb_root *self)
+void machines__destroy_guest_kernel_maps(struct rb_root *machines)
 {
-	struct rb_node *next = rb_first(self);
+	struct rb_node *next = rb_first(machines);
 
 	while (next) {
 		struct machine *pos = rb_entry(next, struct machine, rb_node);
 
 		next = rb_next(&pos->rb_node);
-		rb_erase(&pos->rb_node, self);
+		rb_erase(&pos->rb_node, machines);
 		machine__delete(pos);
 	}
 }
 
-int machine__load_kallsyms(struct machine *self, const char *filename,
+int machine__load_kallsyms(struct machine *machine, const char *filename,
 			   enum map_type type, symbol_filter_t filter)
 {
-	struct map *map = self->vmlinux_maps[type];
+	struct map *map = machine->vmlinux_maps[type];
 	int ret = dso__load_kallsyms(map->dso, filename, map, filter);
 
 	if (ret > 0) {
@@ -2582,16 +2598,16 @@ int machine__load_kallsyms(struct machine *self, const char *filename,
 		 * kernel, with modules between them, fixup the end of all
 		 * sections.
 		 */
-		__map_groups__fixup_end(&self->kmaps, type);
+		__map_groups__fixup_end(&machine->kmaps, type);
 	}
 
 	return ret;
 }
 
-int machine__load_vmlinux_path(struct machine *self, enum map_type type,
+int machine__load_vmlinux_path(struct machine *machine, enum map_type type,
 			       symbol_filter_t filter)
 {
-	struct map *map = self->vmlinux_maps[type];
+	struct map *map = machine->vmlinux_maps[type];
 	int ret = dso__load_vmlinux_path(map->dso, map, filter);
 
 	if (ret > 0) {
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 713b0b40cc4..242de0101a8 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -62,7 +62,7 @@ struct symbol {
 	char		name[0];
 };
 
-void symbol__delete(struct symbol *self);
+void symbol__delete(struct symbol *sym);
 
 struct strlist;
 
@@ -96,9 +96,9 @@ struct symbol_conf {
 
 extern struct symbol_conf symbol_conf;
 
-static inline void *symbol__priv(struct symbol *self)
+static inline void *symbol__priv(struct symbol *sym)
 {
-	return ((void *)self) - symbol_conf.priv_size;
+	return ((void *)sym) - symbol_conf.priv_size;
 }
 
 struct ref_reloc_sym {
@@ -155,43 +155,45 @@ struct dso {
 
 struct dso *dso__new(const char *name);
 struct dso *dso__new_kernel(const char *name);
-void dso__delete(struct dso *self);
+void dso__delete(struct dso *dso);
 
-int dso__name_len(const struct dso *self);
+int dso__name_len(const struct dso *dso);
 
-bool dso__loaded(const struct dso *self, enum map_type type);
-bool dso__sorted_by_name(const struct dso *self, enum map_type type);
+bool dso__loaded(const struct dso *dso, enum map_type type);
+bool dso__sorted_by_name(const struct dso *dso, enum map_type type);
 
-static inline void dso__set_loaded(struct dso *self, enum map_type type)
+static inline void dso__set_loaded(struct dso *dso, enum map_type type)
 {
-	self->loaded |= (1 << type);
+	dso->loaded |= (1 << type);
 }
 
-void dso__sort_by_name(struct dso *self, enum map_type type);
+void dso__sort_by_name(struct dso *dso, enum map_type type);
 
 struct dso *__dsos__findnew(struct list_head *head, const char *name);
 
-int dso__load(struct dso *self, struct map *map, symbol_filter_t filter);
-int dso__load_vmlinux(struct dso *self, struct map *map,
+int dso__load(struct dso *dso, struct map *map, symbol_filter_t filter);
+int dso__load_vmlinux(struct dso *dso, struct map *map,
 		      const char *vmlinux, symbol_filter_t filter);
-int dso__load_vmlinux_path(struct dso *self, struct map *map,
+int dso__load_vmlinux_path(struct dso *dso, struct map *map,
 			   symbol_filter_t filter);
-int dso__load_kallsyms(struct dso *self, const char *filename, struct map *map,
+int dso__load_kallsyms(struct dso *dso, const char *filename, struct map *map,
 		       symbol_filter_t filter);
-int machine__load_kallsyms(struct machine *self, const char *filename,
+int machine__load_kallsyms(struct machine *machine, const char *filename,
 			   enum map_type type, symbol_filter_t filter);
-int machine__load_vmlinux_path(struct machine *self, enum map_type type,
+int machine__load_vmlinux_path(struct machine *machine, enum map_type type,
 			       symbol_filter_t filter);
 
 size_t __dsos__fprintf(struct list_head *head, FILE *fp);
 
-size_t machine__fprintf_dsos_buildid(struct machine *self, FILE *fp, bool with_hits);
-size_t machines__fprintf_dsos(struct rb_root *self, FILE *fp);
-size_t machines__fprintf_dsos_buildid(struct rb_root *self, FILE *fp, bool with_hits);
-
-size_t dso__fprintf_buildid(struct dso *self, FILE *fp);
-size_t dso__fprintf_symbols_by_name(struct dso *self, enum map_type type, FILE *fp);
-size_t dso__fprintf(struct dso *self, enum map_type type, FILE *fp);
+size_t machine__fprintf_dsos_buildid(struct machine *machine,
+				     FILE *fp, bool with_hits);
+size_t machines__fprintf_dsos(struct rb_root *machines, FILE *fp);
+size_t machines__fprintf_dsos_buildid(struct rb_root *machines,
+				      FILE *fp, bool with_hits);
+size_t dso__fprintf_buildid(struct dso *dso, FILE *fp);
+size_t dso__fprintf_symbols_by_name(struct dso *dso,
+				    enum map_type type, FILE *fp);
+size_t dso__fprintf(struct dso *dso, enum map_type type, FILE *fp);
 
 enum symtab_type {
 	SYMTAB__KALLSYMS = 0,
@@ -207,34 +209,36 @@ enum symtab_type {
 	SYMTAB__NOT_FOUND,
 };
 
-char dso__symtab_origin(const struct dso *self);
-void dso__set_long_name(struct dso *self, char *name);
-void dso__set_build_id(struct dso *self, void *build_id);
-void dso__read_running_kernel_build_id(struct dso *self, struct machine *machine);
-struct symbol *dso__find_symbol(struct dso *self, enum map_type type, u64 addr);
-struct symbol *dso__find_symbol_by_name(struct dso *self, enum map_type type,
+char dso__symtab_origin(const struct dso *dso);
+void dso__set_long_name(struct dso *dso, char *name);
+void dso__set_build_id(struct dso *dso, void *build_id);
+void dso__read_running_kernel_build_id(struct dso *dso,
+				       struct machine *machine);
+struct symbol *dso__find_symbol(struct dso *dso, enum map_type type,
+				u64 addr);
+struct symbol *dso__find_symbol_by_name(struct dso *dso, enum map_type type,
 					const char *name);
 
 int filename__read_build_id(const char *filename, void *bf, size_t size);
 int sysfs__read_build_id(const char *filename, void *bf, size_t size);
 bool __dsos__read_build_ids(struct list_head *head, bool with_hits);
-int build_id__sprintf(const u8 *self, int len, char *bf);
+int build_id__sprintf(const u8 *build_id, int len, char *bf);
 int kallsyms__parse(const char *filename, void *arg,
 		    int (*process_symbol)(void *arg, const char *name,
 					  char type, u64 start, u64 end));
 
-void machine__destroy_kernel_maps(struct machine *self);
-int __machine__create_kernel_maps(struct machine *self, struct dso *kernel);
-int machine__create_kernel_maps(struct machine *self);
+void machine__destroy_kernel_maps(struct machine *machine);
+int __machine__create_kernel_maps(struct machine *machine, struct dso *kernel);
+int machine__create_kernel_maps(struct machine *machine);
 
-int machines__create_kernel_maps(struct rb_root *self, pid_t pid);
-int machines__create_guest_kernel_maps(struct rb_root *self);
-void machines__destroy_guest_kernel_maps(struct rb_root *self);
+int machines__create_kernel_maps(struct rb_root *machines, pid_t pid);
+int machines__create_guest_kernel_maps(struct rb_root *machines);
+void machines__destroy_guest_kernel_maps(struct rb_root *machines);
 
 int symbol__init(void);
 void symbol__exit(void);
 bool symbol_type__is_a(char symbol_type, enum map_type map_type);
 
-size_t machine__fprintf_vmlinux_path(struct machine *self, FILE *fp);
+size_t machine__fprintf_vmlinux_path(struct machine *machine, FILE *fp);
 
 #endif /* __PERF_SYMBOL */
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index 0a7ed5b5e28..1e88485c16a 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -2187,7 +2187,6 @@ static const struct flag flags[] = {
 	{ "TASKLET_SOFTIRQ", 6 },
 	{ "SCHED_SOFTIRQ", 7 },
 	{ "HRTIMER_SOFTIRQ", 8 },
-	{ "RCU_SOFTIRQ", 9 },
 
 	{ "HRTIMER_NORESTART", 0 },
 	{ "HRTIMER_RESTART", 1 },
diff --git a/tools/perf/util/ui/browsers/annotate.c b/tools/perf/util/ui/browsers/annotate.c
index 8c17a8730e4..15633d60813 100644
--- a/tools/perf/util/ui/browsers/annotate.c
+++ b/tools/perf/util/ui/browsers/annotate.c
@@ -256,10 +256,9 @@ int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx,
 			 int refresh)
 {
 	struct objdump_line *pos, *n;
-	struct annotation *notes = symbol__annotation(sym);
+	struct annotation *notes;
 	struct annotate_browser browser = {
 		.b = {
-			.entries = &notes->src->source,
 			.refresh = ui_browser__list_head_refresh,
 			.seek	 = ui_browser__list_head_seek,
 			.write	 = annotate_browser__write,
@@ -281,6 +280,8 @@ int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx,
 
 	ui_helpline__push("Press <- or ESC to exit");
 
+	notes = symbol__annotation(sym);
+
 	list_for_each_entry(pos, &notes->src->source, node) {
 		struct objdump_line_rb_node *rbpos;
 		size_t line_len = strlen(pos->line);
@@ -291,6 +292,7 @@ int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx,
 		rbpos->idx = browser.b.nr_entries++;
 	}
 
+	browser.b.entries = &notes->src->source,
 	browser.b.width += 18; /* Percentage */
 	ret = annotate_browser__run(&browser, evidx, refresh);
 	list_for_each_entry_safe(pos, n, &notes->src->source, node) {
diff --git a/tools/perf/util/ui/browsers/hists.c b/tools/perf/util/ui/browsers/hists.c
index 798efdca3ea..5d767c622df 100644
--- a/tools/perf/util/ui/browsers/hists.c
+++ b/tools/perf/util/ui/browsers/hists.c
@@ -851,7 +851,7 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel,
 			goto out_free_stack;
 		case 'a':
 			if (browser->selection == NULL ||
-			    browser->selection->map == NULL ||
+			    browser->selection->sym == NULL ||
 			    browser->selection->map->dso->annotate_warned)
 				continue;
 			goto do_annotate;
diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
index d9678a34dd7..2618ef2ba31 100644
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@@ -46,7 +46,7 @@ int cpu = -1;
  *
  *  performance
  *	Performance is paramount.
- *	Unwilling to sacrafice any performance
+ *	Unwilling to sacrifice any performance
  *	for the sake of energy saving. (hardware default)
  *
  *  normal
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index 3656849f78a..73358d256fa 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -90,7 +90,7 @@ irqfd_shutdown(struct work_struct *work)
 	 * We know no new events will be scheduled at this point, so block
 	 * until all previously outstanding events have completed
 	 */
-	flush_work(&irqfd->inject);
+	flush_work_sync(&irqfd->inject);
 
 	/*
 	 * It is now safe to release the object's resources
@@ -578,7 +578,7 @@ kvm_assign_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
 
 	mutex_lock(&kvm->slots_lock);
 
-	/* Verify that there isnt a match already */
+	/* Verify that there isn't a match already */
 	if (ioeventfd_check_collision(kvm, p)) {
 		ret = -EEXIST;
 		goto unlock_fail;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 556e3efe532..6330653480e 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1037,6 +1037,17 @@ static pfn_t get_fault_pfn(void)
 	return fault_pfn;
 }
 
+int get_user_page_nowait(struct task_struct *tsk, struct mm_struct *mm,
+	unsigned long start, int write, struct page **page)
+{
+	int flags = FOLL_TOUCH | FOLL_NOWAIT | FOLL_HWPOISON | FOLL_GET;
+
+	if (write)
+		flags |= FOLL_WRITE;
+
+	return __get_user_pages(tsk, mm, start, 1, flags, page, NULL, NULL);
+}
+
 static inline int check_user_page_hwpoison(unsigned long addr)
 {
 	int rc, flags = FOLL_TOUCH | FOLL_HWPOISON | FOLL_WRITE;
@@ -1070,7 +1081,14 @@ static pfn_t hva_to_pfn(struct kvm *kvm, unsigned long addr, bool atomic,
 		if (writable)
 			*writable = write_fault;
 
-		npages = get_user_pages_fast(addr, 1, write_fault, page);
+		if (async) {
+			down_read(&current->mm->mmap_sem);
+			npages = get_user_page_nowait(current, current->mm,
+						     addr, write_fault, page);
+			up_read(&current->mm->mmap_sem);
+		} else
+			npages = get_user_pages_fast(addr, 1, write_fault,
+						     page);
 
 		/* map read fault as writable if possible */
 		if (unlikely(!write_fault) && npages == 1) {
@@ -1093,7 +1111,8 @@ static pfn_t hva_to_pfn(struct kvm *kvm, unsigned long addr, bool atomic,
 			return get_fault_pfn();
 
 		down_read(&current->mm->mmap_sem);
-		if (check_user_page_hwpoison(addr)) {
+		if (npages == -EHWPOISON ||
+			(!async && check_user_page_hwpoison(addr))) {
 			up_read(&current->mm->mmap_sem);
 			get_page(hwpoison_page);
 			return page_to_pfn(hwpoison_page);